International Nuclear Information System (INIS)
Dobbe, C.A.; Carlson, E.R.; Marshall, N.H.; Marwil, E.S.; Tolli, J.E.
1990-02-01
An independent quality assurance (QA) and verification of Version 1.5 of the MELCOR Accident Consequence Code System (MACCS) was performed. The QA and verification involved examination of the code and associated documentation for consistent and correct implementation of the models in an error-free FORTRAN computer code. The QA and verification was not intended to determine either the adequacy or appropriateness of the models that are used MACCS 1.5. The reviews uncovered errors which were fixed by the SNL MACCS code development staff prior to the release of MACCS 1.5. Some difficulties related to documentation improvement and code restructuring are also presented. The QA and verification process concluded that Version 1.5 of the MACCS code, within the scope and limitations process concluded that Version 1.5 of the MACCS code, within the scope and limitations of the models implemented in the code is essentially error free and ready for widespread use. 15 refs., 11 tabs
MELCOR Accident Consequence Code System (MACCS)
International Nuclear Information System (INIS)
Chanin, D.I.; Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian
1990-02-01
This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems
MELCOR Accident Consequence Code System (MACCS)
Energy Technology Data Exchange (ETDEWEB)
Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA)); Sprung, J.L.; Ritchie, L.T.; Jow, Hong-Nian (Sandia National Labs., Albuquerque, NM (USA))
1990-02-01
This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previous CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. This document, Volume 1, the Users's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems.
International Nuclear Information System (INIS)
Kim, So Ra; Min, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk
2016-01-01
The MELCOR Accident Consequence Code System 2, MACCS2, has been the most widely used through the world among the off-site consequence analysis codes. MACCS2 code is used to estimate the radionuclide concentrations, radiological doses, health effects, and economic consequences that could result from the hypothetical nuclear accidents. Most of the MACCS model parameter values are defined by the user and those input parameters can make a significant impact on the output. A limited parametric study was performed to identify the relative importance of the values of each input parameters in determining the predicted early and latent health effects in MACCS2. These results would not be applicable to every case of the nuclear accidents, because only the limited calculation was performed with Kori-specific data. The endpoints of the assessment were early- and latent cancer-risk in the exposed population, therefore it might produce the different results with the parametric studies for other endpoints, such as contamination level, absorbed dose, and economic cost. Accident consequence assessment is important for decision making to minimize the health effect from radiation exposure, accordingly the sufficient parametric studies are required for the various endpoints and input parameters in further research
MELCOR Accident Consequence Code System (MACCS)
International Nuclear Information System (INIS)
Rollstin, J.A.; Chanin, D.I.; Jow, H.N.
1990-02-01
This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projections, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management
MELCOR Accident Consequence Code System (MACCS)
Energy Technology Data Exchange (ETDEWEB)
Jow, H.N.; Sprung, J.L.; Ritchie, L.T. (Sandia National Labs., Albuquerque, NM (USA)); Rollstin, J.A. (GRAM, Inc., Albuquerque, NM (USA)); Chanin, D.I. (Technadyne Engineering Consultants, Inc., Albuquerque, NM (USA))
1990-02-01
This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs.
MELCOR Accident Consequence Code System (MACCS)
International Nuclear Information System (INIS)
Jow, H.N.; Sprung, J.L.; Ritchie, L.T.; Rollstin, J.A.; Chanin, D.I.
1990-02-01
This report describes the MACCS computer code. The purpose of this code is to simulate the impact of severe accidents at nuclear power plants on the surrounding environment. MACCS has been developed for the US Nuclear Regulatory Commission to replace the previously used CRAC2 code, and it incorporates many improvements in modeling flexibility in comparison to CRAC2. The principal phenomena considered in MACCS are atmospheric transport, mitigative actions based on dose projection, dose accumulation by a number of pathways including food and water ingestion, early and latent health effects, and economic costs. The MACCS code can be used for a variety of applications. These include (1) probabilistic risk assessment (PRA) of nuclear power plants and other nuclear facilities, (2) sensitivity studies to gain a better understanding of the parameters important to PRA, and (3) cost-benefit analysis. This report is composed of three volumes. Volume I, the User's Guide, describes the input data requirements of the MACCS code and provides directions for its use as illustrated by three sample problems. Volume II, the Model Description, describes the underlying models that are implemented in the code, and Volume III, the Programmer's Reference Manual, describes the code's structure and database management. 59 refs., 14 figs., 15 tabs
International Nuclear Information System (INIS)
Sprung, J.L.; Jow, H-N; Rollstin, J.A.; Helton, J.C.
1990-12-01
Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs
Risk Analysis of Fukushima Accident using MACCS2
Energy Technology Data Exchange (ETDEWEB)
Lee, Seunghee; Kim, Juyoul; Kim, Sukhoon; Kim, Juyub [FNC Technology Co. Ltd., Yongin (Korea, Republic of)
2014-05-15
It has been three years since Fukushima Daiichi accident had occurred. Many efforts have been done for a restoration, however, radioactive materials are still released resulting in a crucial additional damage to a human health and economics and the scale of damage is not much evaluated. Therefore, an estimation of damage degree caused by the released radioactive materials right after a nuclear accident is essential to cope with additional radioactive problems. Here, we report the risk analysis of Fukushima Dai-ichi accident using MELCOR Accident Consequence Code System 2 (MACCS2), which is the Nuclear Regulatory Commission's (NRC's) code for evaluating off-site consequences. It is used in level-3 Probabilistic Risk Analyses (PRA), for planning purposes, for cost-benefit analyses and so on. The purpose of this study is to estimate radiological doses and health risks of Fukushima Daiichi accident through short- and long-term of lifetime using MACCS2. In summary, the health risk for inhabitants near Fukushima Daiichi NPP has been evaluated by considering the long term radiation effect using MACCS2 code. The result indicates that the occurrence and death rate of the cancer have been increased by the radioactive materials released from Fukushima Daiichi accident. The result obtained in this study may provide new insights for taking action after the nuclear reactor accident to mitigate the released radioactive materials and to prepare the countermeasure.
International Nuclear Information System (INIS)
Tveten, U.
1990-06-01
The purpose of this report is to document the results of the work performed by the author in connection with the following task, performed for US Nuclear Regulatory Commission, (USNRC) Office of Nuclear Regulatory Research, Division of Systems Research: MACCS Chronic Exposure Pathway Models: Review the chronic exposure pathway models implemented in the MELCOR Accident Consequence Code System (MACCS) and compare those models to the chronic exposure pathway models implemented in similar codes developed in countries that are members of the OECD. The chronic exposures concerned are via: the terrestrial food pathways, the water pathways, the long-term groundshine pathway, and the inhalation of resuspended radionuclides pathway. The USNRC has indicated during discussions of the task that the major effort should be spent on the terrestrial food pathways. There is one chapter for each of the categories of chronic exposure pathways listed above
Overview of MACCS and MACCS2 development efforts
International Nuclear Information System (INIS)
Young, M.
1996-01-01
The MELCOR Accident Consequence Code System (MACCS), publicly distributed since 1987, was developed to estimate the potential impacts to the surrounding public of severe accidents at nuclear power plants. The principal phenomena considered in MACCS are atmospheric transport and deposition under time-variant meteorology, short-term and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs of mitigative actions. At this time, no other publicly available code in the US offers all these capabilities. MACCS2 represents a major enhancement of the capabilities of its predecessor MACCS. MACCS2 was developed as a general-purpose analytical tool applicable to diverse reactor and nonreactor Department of Energy (DOE) facilities. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. The new code features allow detailed evaluations of risks to workers at nearby facilities on large DOE reservations and allow the user to assess the potential impacts of over 700 radionuclides that cannot be considered with MACCS
A review of the Melcor Accident Consequence Code System (MACCS): Capabilities and applications
International Nuclear Information System (INIS)
Young, M.
1995-01-01
MACCS was developed at Sandia National Laboratories (SNL) under U.S. Nuclear Regulatory Commission (NRC) sponsorship to estimate the offsite consequences of potential severe accidents at nuclear power plants (NPPs). MACCS was publicly released in 1990. MACCS was developed to support the NRC's probabilistic safety assessment (PSA) efforts. PSA techniques can provide a measure of the risk of reactor operation. PSAs are generally divided into three levels. Level one efforts identify potential plant damage states that lead to core damage and the associated probabilities, level two models damage progression and containment strength for establishing fission-product release categories, and level three efforts evaluate potential off-site consequences of radiological releases and the probabilities associated with the consequences. MACCS was designed as a tool for level three PSA analysis. MACCS performs probabilistic health and economic consequence assessments of hypothetical accidental releases of radioactive material from NPPs. MACCS includes models for atmospheric dispersion and transport, wet and dry deposition, the probabilistic treatment of meteorology, environmental transfer, countermeasure strategies, dosimetry, health effects, and economic impacts. The computer systems MACCS is designed to run on are the 386/486 PC, VAX/VMS, E3M RISC S/6000, Sun SPARC, and Cray UNICOS. This paper provides an overview of MACCS, reviews some of the applications of MACCS, international collaborations which have involved MACCS, current developmental efforts, and future directions
Insights Gained from Forensic Analysis with MELCOR of the Fukushima-Daiichi Accidents.
Energy Technology Data Exchange (ETDEWEB)
Andrews, Nathan C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gauntt, Randall O. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-10-01
Since the accidents at Fukushima-Daiichi, Sandia National Laboratories has been modeling these accident scenarios using the severe accident analysis code, MELCOR. MELCOR is a widely used computer code developed at Sandia National Laboratories since ~1982 for the U.S. Nuclear Regulatory Commission. Insights from the modeling of these accidents is being used to better inform future code development and potentially improved accident management. To date, our necessity to better capture in-vessel thermal-hydraulic and ex-vessel melt coolability and concrete interactions has led to the implementation of new models. The most recent analyses, presented in this paper, have been in support of the of the Organization for Economic Cooperation and Development Nuclear Energy Agency’s (OECD/NEA) Benchmark Study of the Accident at the Fukushima Daiichi Nuclear Power Station (BSAF) Project. The goal of this project is to accurately capture the source term from all three releases and then model the atmospheric dispersion. In order to do this, a forensic approach is being used in which available plant data and release timings is being used to inform the modeled MELCOR accident scenario. For example, containment failures, core slumping events and lower head failure timings are all enforced parameters in these analyses. This approach is fundamentally different from a blind code assessment analysis often used in standard problem exercises. The timings of these events are informed by representative spikes or decreases in plant data. The combination of improvements to the MELCOR source code resulting from analysis previous accident analysis and this forensic approach has allowed Sandia to generate representative and plausible source terms for all three accidents at Fukushima Daiichi out to three weeks after the accident to capture both early and late releases. In particular, using the source terms developed by MELCOR, the MACCS software code, which models atmospheric dispersion and
MELCOR analysis of the TMI-2 accident
International Nuclear Information System (INIS)
Boucheron, E.A.
1990-01-01
This paper describes the analysis of the Three Mile Island-2 (TMI-2) standard problem that was performed with MELCOR. The MELCOR computer code is being developed by Sandia National Laboratories for the Nuclear Regulatory Commission for the purpose of analyzing severe accident in nuclear power plants. The primary role of MELCOR is to provide realistic predictions of severe accident phenomena and the radiological source team. The analysis of the TMI-2 standard problem allowed for comparison of the model predictions in MELCOR to plant data and to the results of more mechanistic analyses. This exercise was, therefore valuable for verifying and assessing the models in the code. The major trends in the TMI-2 accident are reasonably well predicted with MELCOR, even with its simplified modeling. Comparison of the calculated and measured results is presented and, based on this comparison, conclusions can be drawn concerning the applicability of MELCOR to severe accident analysis. 5 refs., 10 figs., 3 tabs
Code manual for MACCS2: Volume 1, user's guide
International Nuclear Information System (INIS)
Chanin, D.I.; Young, M.L.
1997-03-01
This report describes the use of the MACCS2 code. The document is primarily a user's guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM
Code manual for MACCS2: Volume 1, user`s guide
Energy Technology Data Exchange (ETDEWEB)
Chanin, D.I.; Young, M.L.
1997-03-01
This report describes the use of the MACCS2 code. The document is primarily a user`s guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM.
MACCS2 development and verification efforts
International Nuclear Information System (INIS)
Young, M.; Chanin, D.
1997-01-01
MACCS2 represents a major enhancement of the capabilities of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, released in 1987, was developed to estimate the potential impacts to the surrounding public of severe accidents at nuclear power plants. The principal phenomena considered in MACCS/MACCS2 are atmospheric transport and deposition under time-variant meteorology, short-term and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. MACCS2 was developed as a general-purpose analytical tool applicable to diverse reactor and nonreactor facilities. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. In addition, errors that had been identified in MACCS version1.5.11.1 were corrected, including an error that prevented the code from providing intermediate-phase results. MACCS2 version 1.10 beta test was released to the beta-test group in May, 1995. In addition, the University of New Mexico (UNM) has completed an independent verification study of the code package. Since the beta-test release of MACCS2 version 1.10, a number of minor errors have been identified and corrected, and a number of enhancements have been added to the code package. The code enhancements added since the beta-test release of version 1.10 include: (1) an option to allow the user to input the σ y and σ z plume expansion parameters in a table-lookup form for incremental downwind distances, (2) an option to define different initial dimensions for up to four segments of a release, (3) an enhancement to the COMIDA2 food-chain model preprocessor to allow the user to supply externally calculated tables of tritium food-chain dose per unit deposition on farmland to support analyses of tritium releases, and (4) the capability to calculate direction-dependent doses
Energy Technology Data Exchange (ETDEWEB)
Kim, Sora; Min, Byung-Il; Park, Kihyun; Yang, Byung-Mo; Suh, Kyung-suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2015-10-15
Three of them have undergone fuel melting and hydrogen explosions. A significant amount of radioactive material was released into the atmosphere from FDNPP and dispersed all over the world. In this study, we assessed the offsite consequences of Fukushima disaster in the region within a 30-km radius of FDNPP using the MELCOR Accident Consequence Code Systems 2(MACCS2) code, which is the Nuclear Regulatory Commission's (NRC's) code. The reflection of the realistic regional characteristics, such as long-term meteorological data, site- and population-specific data, and radiation safety regulatory, is essential to accurately analyze the off-site consequences. The assessment that reflects regional characteristics would contribute to identify main causes of exposure doses and to find the effective countermeasures for minimizing the accidental off-site consequences.
Independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool
International Nuclear Information System (INIS)
Madni, I.K.; Eltawila, F.
1994-01-01
MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor nuclear power plants, and is being developed for the US Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL). Brookhaven National Laboratory (BNL) has a program with the NRC called ''MELCOR Verification, Benchmarking, and Applications,'' whose aim is to provide independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool. The scope of this program is to perform quality control verification on all released versions of MELCOR, to benchmark MELCOR against more mechanistic codes and experimental data from severe fuel damage tests, and to evaluate the ability of MELCOR to simulate long-term severe accident transients in commercial LWRs, by applying the code to model both BWRs and PWRs. Under this program, BNL provided input to the NRC-sponsored MELCOR Peer Review, and is currently contributing to the MELCOR Cooperative Assessment Program (MCAP). This paper presents a summary of MELCOR assessment efforts at BNL and their contribution to NRC goals with respect to MELCOR
Input-output model for MACCS nuclear accident impacts estimation¹
Energy Technology Data Exchange (ETDEWEB)
Outkin, Alexander V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bixler, Nathan E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Vargas, Vanessa N [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2015-01-27
Since the original economic model for MACCS was developed, better quality economic data (as well as the tools to gather and process it) and better computational capabilities have become available. The update of the economic impacts component of the MACCS legacy model will provide improved estimates of business disruptions through the use of Input-Output based economic impact estimation. This paper presents an updated MACCS model, bases on Input-Output methodology, in which economic impacts are calculated using the Regional Economic Accounting analysis tool (REAcct) created at Sandia National Laboratories. This new GDP-based model allows quick and consistent estimation of gross domestic product (GDP) losses due to nuclear power plant accidents. This paper outlines the steps taken to combine the REAcct Input-Output-based model with the MACCS code, describes the GDP loss calculation, and discusses the parameters and modeling assumptions necessary for the estimation of long-term effects of nuclear power plant accidents.
MELCOR Severe Accident Analysis on the SMART Reactor
International Nuclear Information System (INIS)
Kim, Tae Woon; Jin, Young Ho; Kim, Young In; Kim, Keung Koo; Wang, Ziao; Revankar, Shripad
2014-01-01
A severe accident is analyzed for Korea SMR reactor, SMART. Core melt down sequences are analyzed for SMART reactor core using MELCOR version 1.8.5. MELCOR is developed by Sandia National Laboratory for US NRC for the simulation of severe accidents in nuclear power plants. Two cases are simulated here and compared between them; one is the case for core having 3 concentric rings and the other is the case for core having 5 concentric rings. One inch break LOCA scenario is simulated and compared between these two core models. Time sequences for the thermal hydraulic behaviors of RPV and thermal heatup behaviors of reactor core are explained in graphically. Thermal hydraulic behavior such as the change of pressure, level, mass, and temperature of RPV is explained. Thermal heatup behavior of reactor core such as oxidation of cladding, hydrogen generation, core slumping down to lower plenum, and finally creep rupture of PRV lower head is explained. Engineered safety features such as safety injection systems (SIS), and Passive residual heat removal systems (PHRS), etc. are assumed to be not working. One inch break of severe accident is simulated on Korean SMR (SMART) Integral PWR with MELCOR code version 1.8.5. Core melt progression and lower head failure time is very slow compared to other commercial reactors. Simulation on 3 and 5 radial rings core models gives very similar pattern in core cell failure timings. Other various accident scenarios (for example, SBO in Fukushima) will be tried further. Containment behaviors and source term behaviors in severe accident conditions will be analyzed in future
Establishment of Infrastructure for Domestic-Specific Level 3 PSA based on MACCS2
Energy Technology Data Exchange (ETDEWEB)
Jang, Seung-Cheol; Han, Seok-Jung; Choi, Sun-Yeong; Lee, Seung-Jun [KAERI, Daejeon (Korea, Republic of); Kim, Wan-Seob [Korea Reliability Technology and System, Daejeon (Korea, Republic of)
2015-05-15
Research activities related to the Level 3 PSA have naturally disappeared since the use of risk surrogates. Recently, Level 3 PSA was only performed to the extent of the purpose of operating license for the plant under construction. Since the Fukushima accident, concern about a comprehensive site-specific Level 3 PSA has been raised for some compelling reasons, especially the evaluation of the domestic multi-unit site risk effect including other site radiological sources (e.g., spent fuel pool, multi-units). Unfortunately, there are no domestic-specific consequence analysis code and input database required to perform a site-specific Level 3 PSA. The paper focuses on the development of the input data management system for domestic-specific Level 3 PSA based MACCS2 (MELCOR Accident Consequence Code System). The authors call it KOSCA-MACCS2 (Korea Off-Site Consequence Analysis based in MACCS2). It serves as an integrated platform for a domestic-specific Level 3 PSA. Also, it provides the pre-processing modules to automatically generate MACCS2 input from diverse types of the domestic-specific data including numerical map data, e.g., meteorological data, numerical population map, digital land use map, economic statistics and so on. Note that some functions should be still developed and added on it, e.g., post-processing module to convert MACCS2 outputs to graphic report forms, and so on. Henceforth, it is necessary to develop a Korean-specific Level 3 PSA code as a substitution for the foreign software, MACCS2.
Development of Methodology for Spent Fuel Pool Severe Accident Analysis Using MELCOR Program
Energy Technology Data Exchange (ETDEWEB)
Kim, Won-Tae; Shin, Jae-Uk [RETech. Co. LTD., Yongin (Korea, Republic of); Ahn, Kwang-Il [KAERI, Daejeon (Korea, Republic of)
2015-05-15
The general reason why SFP severe accident analysis has to be considered is that there is a potential great risk due to the huge number of fuel assemblies and no containment in a SFP building. In most cases, the SFP building is vulnerable to external damage or attack. In contrary, low decay heat of fuel assemblies may make the accident processes slow compared to the accident in reactor core because of a great deal of water. In short, its severity of consequence cannot exclude the consideration of SFP risk management. The U.S. Nuclear Regulatory Commission has performed the consequence studies of postulated spent fuel pool accident. The Fukushima-Daiichi accident has accelerated the needs for the consequence studies of postulated spent fuel pool accidents, causing the nuclear industry and regulatory bodies to reexamine several assumptions concerning beyond-design basis events such as a station blackout. The tsunami brought about the loss of coolant accident, leading to the explosion of hydrogen in the SFP building. Analyses of SFP accident processes in the case of a loss of coolant with no heat removal have studied. Few studies however have focused on a long term process of SFP severe accident under no mitigation action such as a water makeup to SFP. USNRC and OECD have co-worked to examine the behavior of PWR fuel assemblies under severe accident conditions in a spent fuel rack. In support of the investigation, several new features of MELCOR model have been added to simulate both BWR fuel assembly and PWR 17 x 17 assembly in a spent fuel pool rack undergoing severe accident conditions. The purpose of the study in this paper is to develop a methodology of the long-term analysis for the plant level SFP severe accident by using the new-featured MELCOR program in the OPR-1000 Nuclear Power Plant. The study is to investigate the ability of MELCOR in predicting an entire process of SFP severe accident phenomena including the molten corium and concrete reaction. The
International Nuclear Information System (INIS)
Sonnenkalb, Martin
2006-01-01
The paper summarizes the application of MELCOR to German NPPS with PWR and BWR. A development of different code systems like ATHLET/ATHLET-CD, COCOSYS and ASTEC is done as well at GRS but it is not discussed in this paper. GRS has been using MELCOR since 1990 for real plant calculations. The results of MELCOR analyses are used mainly in PSA level 2 studies and in Accident Management projects for both types of NPPs. MELCOR has been a very useful and robust tool for these analyses. The calculations performed within the PSA level 2 studies for both types of German NPPs have shown that typical severe accident scenarios are characterized by several phases and that the consideration of plant specifics are important not only for realistic source term calculations. An overview of typically severe accident phases together with main accident management measures installed in German NPPs is presented in the paper. Several severe accident sequences have been calculated for both reactor types and some detailed nodalisation studies and code to code comparisons have been prepared in the past, to prove the developed core, reactor circuit and containment/building nodalisation schemes. Together with the compilation of the MELCOR data set, the qualification of the nodalisation schemes has been pursued with comparative calculations with detailed GRS codes for selected phases of severe accidents. The results of these comparative analyses showed in most of the areas a good agreement of essential parameters and of the general description of the plant behaviour during the accident progression. The in general detail of the German plant nodalisation schemes developed for MELCOR contributes significantly to this good agreement between integral and detailed code results. The implementation of MELCOR into the GRS simulator ATLAS was very important for the assessment of the results, not only due to the great detail of the nodalisation schemes used. It is used for training of severe accident
Calculation of spent fuel pool severe accident with MELCOR
International Nuclear Information System (INIS)
Deng Jian; Xiang Qing'an; Zhou Kefeng
2014-01-01
A calculation model was established for spent fuel pool (SFP) using MELCOR code to study the severe accident phenomena caused by the long term station black-out (SBO), including spent fuel heatup, zirconium cladding oxidation, and the injection into SFP to mitigate the severe accident. The results show that the severe accident progression is slow and relates directly with the initial water level in SFP. It is illustrated that the injection into SFP is one of the best mitigated measures for the SFP severe accident. (authors)
Accident tolerant clad material modeling by MELCOR: Benchmark for SURRY Short Term Station Black Out
International Nuclear Information System (INIS)
Wang, Jun; Mccabe, Mckinleigh; Wu, Lei; Dong, Xiaomeng; Wang, Xianmao; Haskin, Troy Christopher; Corradini, Michael L.
2017-01-01
Highlights: • Thermo-physical and oxidation kinetics properties calculation and analysis of FeCrAl. • Properties modelling of FeCrAl in MELCOR. • Benchmark calculation of Surry nuclear power plant. - Abstract: Accident tolerant fuel and cladding materials are being investigated to provide a greater resistance to fuel degradation, oxidation and melting if long-term cooling is lost in a Light Water Reactor (LWR) following an accident such as a Station Blackout (SBO) or Loss of Coolant Accident (LOCA). Researchers at UW-Madison are analyzing an SBO sequence and examining the effect of a loss of auxiliary feedwater (AFW) with the MELCOR systems code. Our research work considers accident tolerant cladding materials (e.g., FeCrAl alloy) and their effect on the accident behavior. We first gathered the physical properties of this alternative cladding material via literature review and compared it to the usual zirconium alloys used in LWRs. We then developed a model for the Surry reactor for a Short-term SBO sequence and examined the effect of replacing FeCrAl for Zircaloy cladding. The analysis uses MELCOR, Version 1.8.6 YR, which is developed by Idaho National Laboratory in collaboration with MELCOR developers at Sandia National Laboratories. This version allows the user to alter the cladding material considered, and our study examines the behavior of the FeCrAl alloy as a substitute for Zircaloy. Our benchmark comparisons with the Sandia National Laboratory’s analysis of Surry using MELCOR 1.8.6 and the more recent MELCOR 2.1 indicate good overall agreement through the early phases of the accident progression. When FeCrAl is substituted for Zircaloy to examine its performance, we confirmed that FeCrAl slows the accident progression and reduce the amount of hydrogen generated. Our analyses also show that this special version of MELCOR can be used to evaluate other potential ATF cladding materials, e.g., SiC as well as innovative coatings on zirconium cladding
Accident tolerant clad material modeling by MELCOR: Benchmark for SURRY Short Term Station Black Out
Energy Technology Data Exchange (ETDEWEB)
Wang, Jun, E-mail: jwang564@wisc.edu [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Mccabe, Mckinleigh [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Wu, Lei [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Dong, Xiaomeng [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Wang, Xianmao [Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Haskin, Troy Christopher [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Corradini, Michael L., E-mail: corradini@engr.wisc.edu [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States)
2017-03-15
Highlights: • Thermo-physical and oxidation kinetics properties calculation and analysis of FeCrAl. • Properties modelling of FeCrAl in MELCOR. • Benchmark calculation of Surry nuclear power plant. - Abstract: Accident tolerant fuel and cladding materials are being investigated to provide a greater resistance to fuel degradation, oxidation and melting if long-term cooling is lost in a Light Water Reactor (LWR) following an accident such as a Station Blackout (SBO) or Loss of Coolant Accident (LOCA). Researchers at UW-Madison are analyzing an SBO sequence and examining the effect of a loss of auxiliary feedwater (AFW) with the MELCOR systems code. Our research work considers accident tolerant cladding materials (e.g., FeCrAl alloy) and their effect on the accident behavior. We first gathered the physical properties of this alternative cladding material via literature review and compared it to the usual zirconium alloys used in LWRs. We then developed a model for the Surry reactor for a Short-term SBO sequence and examined the effect of replacing FeCrAl for Zircaloy cladding. The analysis uses MELCOR, Version 1.8.6 YR, which is developed by Idaho National Laboratory in collaboration with MELCOR developers at Sandia National Laboratories. This version allows the user to alter the cladding material considered, and our study examines the behavior of the FeCrAl alloy as a substitute for Zircaloy. Our benchmark comparisons with the Sandia National Laboratory’s analysis of Surry using MELCOR 1.8.6 and the more recent MELCOR 2.1 indicate good overall agreement through the early phases of the accident progression. When FeCrAl is substituted for Zircaloy to examine its performance, we confirmed that FeCrAl slows the accident progression and reduce the amount of hydrogen generated. Our analyses also show that this special version of MELCOR can be used to evaluate other potential ATF cladding materials, e.g., SiC as well as innovative coatings on zirconium cladding
Energy Technology Data Exchange (ETDEWEB)
Moon, Sung Bo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)
2016-05-15
To develop the Korean fusion commercial reactor, preliminary design concept for K-DEMO (Korean fusion demonstration reactor) has been announced by NFRI (National Fusion Research Institute). This pre-conceptual study of K-DEMO has been introduced to identify technical details of a fusion power plant for the future commercialization of fusion reactor in Korea. Before this consideration, to build the K-DEMO, accident analysis is essential. Since the Fukushima accident, which is severe accident from unexpected disaster, safety analysis of nuclear power plant has become important. The safety analysis of both fission and fusion reactors is deemed crucial in demonstrating the low radiological effect of these reactors on the environment, during severe accidents. A risk analysis of K-DEMO should be performed, as a prerequisite for the construction of a fusion reactor. In this research, thermal-hydraulic analysis of single blanket module of K-DEMO is conducted for preliminary accident analysis for K-DEMO. Further study about effect of flow distributer is conducted. The normal K-DEMO operation condition is applied to the boundary condition and simulated to verify the material temperature limit using MELCOR. MELCOR is fully integrated, relatively fast-running code developed by Sandia National Laboratories. MELCOR had been used for Light Water Reactors and fusion reactor version of MELCOR was developed for ITER accident analysis. This study shows the result of thermal-hydraulic simulation of single blanket module with MELCOR which is severe accident code for nuclear fusion safety analysis. The difference of mass flow rate for each coolant channel with or without flow distributer is presented. With flow distributer, advantage of broadening temperature gradient in the K-DEMO blanket module and increase mass flow toward first wall is obtained. This can enhance the safety of K-DEMO blanket module. Most 13 .deg. C temperature difference in blanket module is obtained.
Energy Technology Data Exchange (ETDEWEB)
Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L. [Sandia National Labs., Albuquerque, NM (United States); Hodge, S.A.; Hyman, C.R.; Sanders, R.L. [Oak Ridge National Lab., TN (United States)
1995-03-01
MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR`s phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package.
Study on the code system for the off-site consequences assessment of severe nuclear accident
Energy Technology Data Exchange (ETDEWEB)
Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2016-12-15
The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.
Study on the code system for the off-site consequences assessment of severe nuclear accident
International Nuclear Information System (INIS)
Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk
2016-01-01
The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents
Application of Korean Specific Data to Economic Cost Estimation by KOSCA-MACCS2
International Nuclear Information System (INIS)
Choi, Sun Yeong; Jang, Seung-Cheol
2015-01-01
Default values for various data provided by MACCS2(MELCOR Accident Consequence Code System Version 2) such as population, weather, food, and economic cost are far from current domestic condition. In the case of economic cost data, related default values came from MACCS and WASH-1400. KAERI (Korea Atomic Energy Research Institute) has been developed a Korean-specific level 3 PSA (Probabilistic Safety Assessment) code package based on MACCS2 to reflect domestic condition for off-site consequence analysis. To this end, we performed a study on the domestic specific technical issues for level 3 PSA, which are a dose conversion factor, food chain model, atmospheric dispersion model, and domestic-specific economic effect model. Based on the study, we developed a level 3 PSA code, so-called KOSCAMACCS2 (Korean-specific Off-Site Consequence Analysis based on MACCS2). The purpose of this paper is to introduce economic cost variable provided by KOSCA-MACCS2 and application of Korean-specific data to the related economic cost estimation with KOSCA-MACCS2. In this paper, we introduced economic cost variable provided by KOSCA-MACCS2 and suggested the application plan of Korean-specific data to the related economic cost estimation. To this end, we considered data sources for those economic cost variables to reflect Korea-specific features such as data by Statistics Korea or Bank of Korea etc. For the decontamination related variables, we applied foreign literatures to apply data, which are Extern-E and UNESCO Chernobyl Forum data. Based on the data resources we estimated data for input variables related to economic cost estimation
Application of Korean Specific Data to Economic Cost Estimation by KOSCA-MACCS2
Energy Technology Data Exchange (ETDEWEB)
Choi, Sun Yeong; Jang, Seung-Cheol [KAERI, Daejeon (Korea, Republic of)
2015-05-15
Default values for various data provided by MACCS2(MELCOR Accident Consequence Code System Version 2) such as population, weather, food, and economic cost are far from current domestic condition. In the case of economic cost data, related default values came from MACCS and WASH-1400. KAERI (Korea Atomic Energy Research Institute) has been developed a Korean-specific level 3 PSA (Probabilistic Safety Assessment) code package based on MACCS2 to reflect domestic condition for off-site consequence analysis. To this end, we performed a study on the domestic specific technical issues for level 3 PSA, which are a dose conversion factor, food chain model, atmospheric dispersion model, and domestic-specific economic effect model. Based on the study, we developed a level 3 PSA code, so-called KOSCAMACCS2 (Korean-specific Off-Site Consequence Analysis based on MACCS2). The purpose of this paper is to introduce economic cost variable provided by KOSCA-MACCS2 and application of Korean-specific data to the related economic cost estimation with KOSCA-MACCS2. In this paper, we introduced economic cost variable provided by KOSCA-MACCS2 and suggested the application plan of Korean-specific data to the related economic cost estimation. To this end, we considered data sources for those economic cost variables to reflect Korea-specific features such as data by Statistics Korea or Bank of Korea etc. For the decontamination related variables, we applied foreign literatures to apply data, which are Extern-E and UNESCO Chernobyl Forum data. Based on the data resources we estimated data for input variables related to economic cost estimation.
Energy Technology Data Exchange (ETDEWEB)
Merrill, Brad J., E-mail: brad.merrill@inl.gov; Bragg-Sitton, Shannon M., E-mail: shannon.bragg-sitton@inl.gov; Humrickhouse, Paul W., E-mail: paul.humrickhouse@inl.gov
2017-04-15
Highlights: • Accident tolerant fuels (ATF) systems are currently under development for LWRs. • Many performance analysis tools are specifically developed for UO{sub 2}–Zr alloy fuel. • Modifications were made to the MELCOR code for candidate ATF cladding. • Preliminary analysis results for SiC and FeCrAl cladding concepts are presented. - Abstract: A number of materials are currently under development as candidate accident tolerant fuel and cladding for application in the current fleet of commercial light water reactors (LWRs). The safe, reliable and economic operation of the nation’s nuclear power reactor fleet has always been a top priority for the nuclear industry. Continual improvement of technology, including advanced materials and nuclear fuels, remains central to the industry’s success. Enhancing the accident tolerance of light water reactors became a topic of serious discussion following the 2011 Great East Japan Earthquake, resulting tsunami, and subsequent damage to the Fukushima Daiichi nuclear power plant complex. The overall goal for the development of accident tolerant fuel (ATF) systems for LWRs is to identify alternative fuel system technologies to further enhance the safety, competitiveness, and economics of commercial nuclear power. Designed for use in the current fleet of commercial LWRs, or in reactor concepts with design certifications (GEN-III+), to achieve their goal enhanced ATF must endure loss of active cooling in the reactor core for a considerably longer period of time than the current fuel system, while maintaining or improving performance during normal operation. Many available nuclear fuel performance analysis tools are specifically developed for the current UO{sub 2}–Zirconium alloy fuel system. The MELCOR severe-accident analysis code, under development at the Sandia National Laboratory in New Mexico (SNL-NM) for the US Nuclear Regulatory Commission (NRC), is one of these tools. This paper describes modifications
International Nuclear Information System (INIS)
Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.
1995-03-01
MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the U.S. Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package
MELCOR DB Construction for the Severe Accident Analysis DB
International Nuclear Information System (INIS)
Song, Y. M.; Ahn, K. I.
2011-01-01
The Korea Atomic Energy Research Institute (KAERI) has been constructing a severe accident analysis database (DB) under a National Nuclear R and D Program. In particular, an MAAP (commercial code being widely used in industries for integrated severe accident analysis) DB for many scenarios including a station blackout (SBO) has been completed. This paper shows the MELCOR DB construction process with examples of SBO scenarios, and the results will be used for a comparison with the MAAP DB
Comparison of CORA and MELCOR core degradation simulation and the MELCOR oxidation model
International Nuclear Information System (INIS)
Wang, Jun; Corradini, Michael L.; Fu, Wen; Haskin, Troy; Tian, Wenxi; Zhang, Yapei; Su, Guanghui; Qiu, Suizheng
2014-01-01
Highlights: • Oxidation model of MELCOR is analyzed and the improving suggestion is provided. • MELCOR core degradation calculating results are compared with CORA experiment. • Flow rate of argon and steam, the generating rate of hydrogen is calculated and compared. • Temperature spatial variation and temperature history is calculated and presented. - Abstract: MELCOR is widely used and sufficiently trusted for severe accident analysis. However, the occurrence of Fukushima has increased the focus on severe accident codes and their use. A MELCOR core degradation calculation was conducted at the University of Wisconsin–Madison under the help of Sandia. The calculation results were checked by comparing with a past CORA experiment. MELCOR calculation results included the flow rate of argon and steam, the generation rate of hydrogen. Through this work, the performance of MELCOR COR package was reviewed in detail. This paper compares the hydrogen generation rates predicted by MELCOR to the CORA test data. While agreement is reasonable it could be improved. Additionally, the MELCOR zirconium oxidation model was analyzed
Comparison of CORA and MELCOR core degradation simulation and the MELCOR oxidation model
Energy Technology Data Exchange (ETDEWEB)
Wang, Jun [College of Engineering, The University of Wisconsin-Madison, Madison, WI 53706 (United States); State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049 (China); Corradini, Michael L., E-mail: corradini@engr.wisc.edu [College of Engineering, The University of Wisconsin-Madison, Madison, WI 53706 (United States); Fu, Wen [College of Engineering, The University of Wisconsin-Madison, Madison, WI 53706 (United States); Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084 (China); Haskin, Troy [College of Engineering, The University of Wisconsin-Madison, Madison, WI 53706 (United States); Tian, Wenxi; Zhang, Yapei; Su, Guanghui; Qiu, Suizheng [State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an 710049 (China)
2014-09-15
Highlights: • Oxidation model of MELCOR is analyzed and the improving suggestion is provided. • MELCOR core degradation calculating results are compared with CORA experiment. • Flow rate of argon and steam, the generating rate of hydrogen is calculated and compared. • Temperature spatial variation and temperature history is calculated and presented. - Abstract: MELCOR is widely used and sufficiently trusted for severe accident analysis. However, the occurrence of Fukushima has increased the focus on severe accident codes and their use. A MELCOR core degradation calculation was conducted at the University of Wisconsin–Madison under the help of Sandia. The calculation results were checked by comparing with a past CORA experiment. MELCOR calculation results included the flow rate of argon and steam, the generation rate of hydrogen. Through this work, the performance of MELCOR COR package was reviewed in detail. This paper compares the hydrogen generation rates predicted by MELCOR to the CORA test data. While agreement is reasonable it could be improved. Additionally, the MELCOR zirconium oxidation model was analyzed.
Analysis of the primary source term for meltdown accidents using MELCOR 1.8.2
International Nuclear Information System (INIS)
Schmuck, P.
1995-01-01
The MELCOR code describing accident phenomena in the core and primary systems was used for source term calculations and - in the context of the MELCOR Cooperative Assessment Programme - for studying two-phase flows through components such as valves and chokes. Results of the latter studies in comparison to experiments gave hints for an improved calculation of momentum transfer between the phases. (orig.)
International Nuclear Information System (INIS)
Boyack, B.E.; Dhir, V.K.; Gieseke, J.A.; Haste, T.J.; Kenton, M.A.; Khatib-Rahbar, M.; Leonard, M.T.; Viskanta, R.
1992-03-01
MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The newest version of MELCOR is Version 1.8.1, July 1991. MELCOR development has reached the point that the United States Nuclear Regulatory Commission sponsored a broad technical review by recognized experts to determine or confirm the technical adequacy of the code for the serious and complex analyses it is expected to perform. For this purpose, an eight-member MELCOR Peer Review Committee was organized. The Committee has completed its review of the MELCOR code: the review process and findings of the MELCOR Peer Review Committee are documented in this report. The Committee has determined that recommendations in five areas are appropriate: (1) MELCOR numerics, (2) models missing from MELCOR Version 1.8.1, (3) existing MELCOR models needing revision, (4) the need for expanded MELCOR assessment, and (5) documentation
Energy Technology Data Exchange (ETDEWEB)
Schmuck, P.
1995-08-01
The MELCOR code describing accident phenomena in the core and primary systems was used for source term calculations and - in the context of the MELCOR Cooperative Assessment Programme - for studying two-phase flows through components such as valves and chokes. Results of the latter studies in comparison to experiments gave hints for an improved calculation of momentum transfer between the phases. (orig.)
MELCOR assessment of sequential severe accident mitigation actions under SGTR accident
International Nuclear Information System (INIS)
Choi, Wonjun; Jeon, Joongoo; Kim, Nam Kyung; Kim, Sung Joong
2017-01-01
The representative example of the severe accident studies using the severe accident code is investigation of effectiveness of developed severe accident management (SAM) strategy considering the positive and adverse effects. In Korea, some numerical studies were performed to investigate the SAM strategy using various severe accident codes. Seo et.al performed validation of RCS depressurization strategy and investigated the effect of severe accident management guidance (SAMG) entry condition under small break loss of coolant accident (SBLOCA) without safety injection (SI), station blackout (SBO), and total loss of feed water (TLOFW) scenarios. The SGTR accident with the sequential mitigation actions according to the flow chart of SAMG was simulated by the MELCOR 1.8.6 code. Three scenariospreventing the RPV failure were investigated in terms of fission product release, hydrogen risk, and the containment pressure. Major conclusions can be summarized as follows: (1) According to the flow chart of SAMG, RPV failure can be prevented depending on the method of RCS depressurization. (2) To reduce the release of fission product during the injecting into SGs, a temporary opening of SDS before the injecting into SGs was suggested. These modified sequences of mitigation actions can reduce the release of fission product and the adverse effect of SDS.
MELCOR code modeling for APR1400
Energy Technology Data Exchange (ETDEWEB)
Choi, Young; Park, S. Y.; Kim, D. H.; Ahn, K. I.; Song, Y. M.; Kim, S. D.; Park, J. H
2001-11-01
The severe accident phenomena of nuclear power plant have large uncertainties. For the retention of the containment integrity and improvement of nuclear reactor safety against severe accident, it is essential to understand severe accident phenomena and be able to access the accident progression accurately using computer code. Furthermore, it is important to attain a capability for developing technique and assessment tools for an advanced nuclear reactor design as well as for the severe accident prevention and mitigation. The objective of this report is to establish technical bases for an application of the MELCOR code to the Korean Next Generation Reactor (APR1400) by modeling the plant and analyzing plant steady state. This report shows the data and the input preparation for MELCOR code as well as state-state assessment results using MELCOR code.
Analysis of unmitigated large break loss of coolant accidents using MELCOR code
Pescarini, M.; Mascari, F.; Mostacci, D.; De Rosa, F.; Lombardo, C.; Giannetti, F.
2017-11-01
In the framework of severe accident research activity developed by ENEA, a MELCOR nodalization of a generic Pressurized Water Reactor of 900 MWe has been developed. The aim of this paper is to present the analysis of MELCOR code calculations concerning two independent unmitigated large break loss of coolant accident transients, occurring in the cited type of reactor. In particular, the analysis and comparison between the transients initiated by an unmitigated double-ended cold leg rupture and an unmitigated double-ended hot leg rupture in the loop 1 of the primary cooling system is presented herein. This activity has been performed focusing specifically on the in-vessel phenomenology that characterizes this kind of accidents. The analysis of the thermal-hydraulic transient phenomena and the core degradation phenomena is therefore here presented. The analysis of the calculated data shows the capability of the code to reproduce the phenomena typical of these transients and permits their phenomenological study. A first sequence of main events is here presented and shows that the cold leg break transient results faster than the hot leg break transient because of the position of the break. Further analyses are in progress to quantitatively assess the results of the code nodalization for accident management strategy definition and fission product source term evaluation.
Energy Technology Data Exchange (ETDEWEB)
Kretzschmar, Frank; Dietrich, Philipp; Gabriel, Stephan; Miassoedov, Alexei
2016-12-15
The knowledge of the key phenomena, which govern the chronological sequence of a core melt accident, is a crucial precondition for the development of SAMGs (Severe Management Guides) to avoid and mitigate the radiological consequences for the population and the environment. In the frame of a dissertation a new model has been coupled with MELCOR, which describes the thermal interaction of a core melt with the RPV (reactor pressure vessel) wall in the lower plenum. This model allows a better description of this phenomenon. The method to couple extern programs with MELCOR had been already developed and used in a former dissertation at KIT-IKET. The model has been validated recalculating according experiments in the LIVE facility. Afterwards a defined accident scenario has been calculated for a German generic KONVOI power plant. 12 months after the start of the project a MELCOR input has been developed using data delivered by the Ruhr university of Bochum (subproject ''Simulation des Unfalls in Fukushima-Daichi zur Bewertung des Stoerfall-Analysecodes ATHLET-CD''). The results of this simulation have made a contribution to review the current understanding of the FUKUSHIMA sequence. HZDR and KIT-IKET have agreed in the course of the project, that KIT-IKET will develop a MELCOR input of a german generic KONVOI power plant following an ATHLET-CDinput of HZDR. Using this MELCOR input, a comparative analysis has been performed.
MELCOR based severe accident simulation for WWER-440 type nuclear power plants
International Nuclear Information System (INIS)
Vegh, E.; Buerger, L.; Gacs, A.; Gyenes, F.G.; Hozer, Z.; Makovi, P.
1997-01-01
SUBA is a MELCOR based severe accident simulator, installed this summer at the Hungarian Nuclear Safety Directorate. In this simulator the thermohydraulics, chemical reactions and material transport in the primary and secondary systems are calculated by the MELCOR code, but the containment, except the cavity, is modelled by the HERMET code, developed in our Institute. The instrumentation and control, the safety systems and the plant logic, are calculated by our models. This paper describes the main features of the used models and presents three different test transients. The presented transients are as follows: a small break LOCA, a cold leg large break LOCA, and the station blackout, without Diesel generators. In each treated transients the most important parameters are presented as time functions and the most significant events are analysed. (author)
Comparison of Severe Accident Results Among SCDAP/RELAP5, MAAP, and MELCOR Codes
International Nuclear Information System (INIS)
Wang, T.-C.; Wang, S.-J.; Teng, J.-T.
2005-01-01
This paper demonstrates a large-break loss-of-coolant accident (LOCA) sequence of the Kuosheng nuclear power plant (NPP) and station blackout sequence of the Maanshan NPP with the SCDAP/RELAP5 (SR5), Modular Accident Analysis Program (MAAP), and MELCOR codes. The large-break sequence initiated with double-ended rupture of a recirculation loop. The main steam isolation valves (MSIVs) closed, the feedwater pump tripped, the reactor scrammed, and the assumed high-pressure and low-pressure spray systems of the emergency core cooling system (ECCS) were not functional. Therefore, all coolant systems to quench the core were lost. MAAP predicts a longer vessel failure time, and MELCOR predicts a shorter vessel failure time for the large-break LOCA sequence. The station blackout sequence initiated with a loss of all alternating-current (ac) power. The MSIVs closed, the feedwater pump tripped, and the reactor scrammed. The motor-driven auxiliary feedwater system and the high-pressure and low-pressure injection systems of the ECCS were lost because of the loss of all ac power. It was also assumed that the turbine-driven auxiliary feedwater pump was not functional. Therefore, the coolant system to quench the core was also lost. MAAP predicts a longer time of steam generator dryout, time interval between top of active fuel and bottom of active fuel, and vessel failure time than those of the SR5 and MELCOR predictions for the station blackout sequence. The three codes give similar results for important phenomena during the accidents, including SG dryout, core uncovery, cladding oxidation, cladding failure, molten pool formulation, debris relocation to the lower plenum, and vessel head failure. This paper successfully demonstrates the large-break LOCA sequence of the Kuosheng NPP and the station blackout sequence of the Maanshan NPP
On-site worker-risk calculations using MACCS
International Nuclear Information System (INIS)
Peterson, V.L.
1993-01-01
We have revised the latest version of MACCS for use with the calculation of doses and health risks to on-site workers for postulated accidents at the Rocky Flats Plant (RFP) in Colorado. The modifications fall into two areas: (1) an improved estimate of shielding offered by buildings to workers that remain indoors; and, (2) an improved treatment of building-wake effects, which affects both indoor and outdoor workers. Because the postulated accident can be anywhere on plant site, user-friendly software has been developed to create those portions of the (revised) MACCS input data files that are specific to the accident site
Containment Sodium Chemistry Models in MELCOR.
Energy Technology Data Exchange (ETDEWEB)
Louie, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Denman, Matthew R [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-04-01
To meet regulatory needs for sodium fast reactors’ future development, including licensing requirements, Sandia National Laboratories is modernizing MELCOR, a severe accident analysis computer code developed for the U.S. Nuclear Regulatory Commission (NRC). Specifically, Sandia is modernizing MELCOR to include the capability to model sodium reactors. However, Sandia’s modernization effort primarily focuses on the containment response aspects of the sodium reactor accidents. Sandia began modernizing MELCOR in 2013 to allow a sodium coolant, rather than water, for conventional light water reactors. In the past three years, Sandia has been implementing the sodium chemistry containment models in CONTAIN-LMR, a legacy NRC code, into MELCOR. These chemistry models include spray fire, pool fire and atmosphere chemistry models. Only the first two chemistry models have been implemented though it is intended to implement all these models into MELCOR. A new package called “NAC” has been created to manage the sodium chemistry model more efficiently. In 2017 Sandia began validating the implemented models in MELCOR by simulating available experiments. The CONTAIN-LMR sodium models include sodium atmosphere chemistry and sodium-concrete interaction models. This paper presents sodium property models, the implemented models, implementation issues, and a path towards validation against existing experimental data.
Cost-effectiveness analysis of countermeasures using accident consequence assessment models
International Nuclear Information System (INIS)
Alonso, A.; Gallego, E.
1987-01-01
In the event of a large release of radionuclides from a nuclear power plant, protective actions for the population potentially affected must be implemented. Cost-effectiveness analysis will be useful to define the countermeasures and the criteria needed to implement them. This paper shows the application of Accident Consequence Assessment (ACA) models to cost-effectiveness analysis of emergency and long-term countermeasures, making use of the different relationships between dose, contamination levels, affected areas and population distribution, included in such a model. The procedure is illustrated with the new Melcor Accident Consequence Code System (MACCS 1.3), developed at Sandia National Laboratories (USA), for a fixed accident scenario. Different alternative actions are evaluated with regard to their radiological and economical impact, searching for an 'optimum' strategy. (author)
Experience and results of MELCOR application for German PWRs
International Nuclear Information System (INIS)
Sonnenkalb, M.
1999-01-01
An introduction into severe accident research work performed at GRS with regard to the use of the MELCOR code is given in Chapter One of the paper. Experience in applying MELCOR 1.8.3 for German PWRs and results of MELCOR calculations done within the project 'Accident management - Mitigation' for German LWRs are presented in Chapter Two. This 3-year project was finished February 1998. It was funded by the German Ministry for Environment, Nature Conservation and Nuclear Safety - BMU. In Chapter Three, a short overview of a training course on 'Phenomenology of Severe Accidents in PWR-Plants' is given. Mainly due to the interest from German NPPs GRS developed this special training session in 1996. Since 1996 it has been held several times for operators, shift personnel and the management board of two different German NPPs and for lecture of the German NPP training centre in Essen. In Chapter Four, results of the application of MELCOR 1.8.4 for German PWRs are presented. This work is done within a new project on 'Accident Management - Mitigation' for German LWRs. It was started in March 1998 and is again funded by the German Federal Ministry BMU. An objective of this project is to perform further MELCOR calculations, to be used within a PSA level 2 study for a German PWR, which is done at GRS in parallel. The experience of using MELCOR for German PWRs are summarised in Chapter Five. (author)
The analysis of thermal-hydraulic models in MELCOR code
Energy Technology Data Exchange (ETDEWEB)
Kim, M H; Hur, C; Kim, D K; Cho, H J [POhang Univ., of Science and TECHnology, Pohang (Korea, Republic of)
1996-07-15
The objective of the present work is to verify the prediction and analysis capability of MELCOR code about the progression of severe accidents in light water reactor and also to evaluate appropriateness of thermal-hydraulic models used in MELCOR code. Comparing the results of experiment and calculation with MELCOR code is carried out to achieve the above objective. Specially, the comparison between the CORA-13 experiment and the MELCOR code calculation was performed.
International Nuclear Information System (INIS)
De Rosa, Felice
2006-01-01
In the ambit of the Severe Accident Network of Excellence Project (SARNET), funded by the European Union, 6. FISA (Fission Safety) Programme, one of the main tasks is the development and validation of the European Accident Source Term Evaluation Code (ASTEC Code). One of the reference codes used to compare ASTEC results, coming from experimental and Reactor Plant applications, is MELCOR. ENEA is a SARNET member and also an ASTEC and MELCOR user. During the first 18 months of this project, we performed a series of MELCOR and ASTEC calculations referring to a French PWR 900 MWe and to the accident sequence of 'Loss of Steam Generator (SG) Feedwater' (known as H2 sequence in the French classification). H2 is an accident sequence substantially equivalent to a Station Blackout scenario, like a TMLB accident, with the only difference that in H2 sequence the scram is forced to occur with a delay of 28 seconds. The main events during the accident sequence are a loss of normal and auxiliary SG feedwater (0 s), followed by a scram when the water level in SG is equal or less than 0.7 m (after 28 seconds). There is also a main coolant pumps trip when ΔTsat < 10 deg. C, a total opening of the three relief valves when Tric (core maximal outlet temperature) is above 603 K (330 deg. C) and accumulators isolation when primary pressure goes below 1.5 MPa (15 bar). Among many other points, it is worth noting that this was the first time that a MELCOR 1.8.5 input deck was available for a French PWR 900. The main ENEA effort in this period was devoted to prepare the MELCOR input deck using the code version v.1.8.5 (build QZ Oct 2000 with the latest patch 185003 Oct 2001). The input deck, completely new, was prepared taking into account structure, data and same conditions as those found inside ASTEC input decks. The main goal of the work presented in this paper is to put in evidence where and when MELCOR provides good enough results and why, in some cases mainly referring to its
MELCOR modeling of Fukushima unit 2 accident
Energy Technology Data Exchange (ETDEWEB)
Sevon, Tuomo [VTT Technical Research Centre of Finland, Espoo (Finland)
2014-12-15
A MELCOR model of the Fukushima Daiichi unit 2 accident was created in order to get a better understanding of the event and to improve severe accident modeling methods. The measured pressure and water level could be reproduced relatively well with the calculation. This required adjusting the RCIC system flow rates and containment leak area so that a good match to the measurements is achieved. Modeling of gradual flooding of the torus room with water that originated from the tsunami was necessary for a satisfactory reproduction of the measured containment pressure. The reactor lower head did not fail in this calculation, and all the fuel remained in the RPV. 13 % of the fuel was relocated from the core area, and all the fuel rods lost their integrity, releasing at least some volatile radionuclides. According to the calculation, about 90 % of noble gas inventory and about 0.08 % of cesium inventory was released to the environment. The release started 78 h after the earthquake, and a second release peak came at 90 h. Uncertainties in the calculation are very large because there is scarce public data available about the Fukushima power plant and because it is not yet possible to inspect the status of the reactor and the containment. Uncertainty in the calculated cesium release is larger than factor of ten.
Ex-plant consequence assessment for NUREG-1150: models, typical results, uncertainties
International Nuclear Information System (INIS)
Sprung, J.L.
1988-01-01
The assessment of ex-plant consequences for NUREG-1150 source terms was performed using the MELCOR Accident Consequence Code System (MACCS). This paper briefly discusses the following elements of MACCS consequence calculations: input data, phenomena modeled, computational framework, typical results, controlling phenomena, and uncertainties. Wherever possible, NUREG-1150 results will be used to illustrate the discussion. 28 references
Development of a severe accident training simulator using a MELCOR code
International Nuclear Information System (INIS)
Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo; Jung, Won Dae
2002-03-01
Nuclear power plants' severe accidents are, despite of their rareness, very important in safety aspects, because of their huge damages when occurred. For the appropriate execution of severe accident strategy, more information for decision-making are required because of the uncertainties included in severe accidents. Earlier NRC raised concerns over severe accident training in the report NUREC/CR-477, and accordingly, developing effective training tools for severe accident were emphasized. In fact the training tools were requested from industrial area, nevertheless, few training tools were developed due to the uncertainties in severe accidents, lacks of analysis computer codes and technical limitations. SATS, the severe accident training simulator, is developed as a multi-purpose tools for severe accident training. SATS uses the calculation results of MELCOR, an integral severe accident analysis code, and with the help of SL-GMS graphic tools, provides dynamic displays of severe accident phenomena on the terminal of IBM PC. It aimed to have two main features: one is to provide graphic displays to represent severe accident phenomena and the other is to process and simulate severe accident strategy given by plant operators and TSC staffs. Severe accident strategies are basically composed of series of operations of available pumps, valves and other equipments. Whenever executing strategies with SATS, the trainee should follow the HyperKAMG, the on line version of the recently developed severe accident guidance (KAMG). Severe accident strategies are closely related to accidents scenarios. TLOFW and LOCA , two representative severe accident scenarios of Uljin 3,4, are developed as a built-in scenarios of SATS. Although SATS has some minor problems at this time, we expect SATS will be a good severe accident training tool after the appropriate addition of accident scenarios. Moreover, we also expect SATS will be a good advisory tool for the severe accident research
MELCOR 1.8.2 Analyses in Support of ITER's RPrS
International Nuclear Information System (INIS)
Brad J Merrill
2008-01-01
The International Thermonuclear Experimental Reactor (ITER) Program is performing accident analyses for ITER's 'Rapport Preliminaire de Surete' (Report Preliminary on Safety - RPrS) with a modified version of the MELCOR 1.8.2 code. The RPrS is an ITER safety document required in the ITER licensing process to obtain a 'Decret Autorisation de Construction' (a Decree Authorizing Construction - DAC) for the ITER device. This report documents the accident analyses performed by the US with the MELCOR 1.8.2 code in support of the ITER RPrS effort. This work was funded through an ITER Task Agreement for MELCOR Quality Assurance and Safety Analyses. Under this agreement, the US was tasked with performing analyses for three accident scenarios in the ITER facility. Contained within the text of this report are discussions that identify the cause of these accidents, descriptions of how these accidents are likely to proceed, the method used to analyze the consequences of these accidents, and discussions of the transient thermal hydraulic and radiological release results for these accidents
Energy Technology Data Exchange (ETDEWEB)
Andrews, Nathan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Faucett, Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Haskin, Troy Christopher [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Luxat, Dave [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Geiger, Garrett [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Codella, Brittany [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-10-01
Following the conclusion of the first phase of the crosswalk analysis, one of the key unanswered questions was whether or not the deviations found would persist during a partially recovered accident scenario, similar to the one that occurred in TMI - 2. In particular this analysis aims to compare the impact of core degradation morphology on quenching models inherent within the two codes and the coolability of debris during partially recovered accidents. A primary motivation for this study is the development of insights into how uncertainties in core damage progression models impact the ability to assess the potential for recovery of a degraded core. These quench and core recovery models are of the most interest when there is a significant amount of core damage, but intact and degraded fuel still remain in the cor e region or the lower plenum. Accordingly this analysis presents a spectrum of partially recovered accident scenarios by varying both water injection timing and rate to highlight the impact of core degradation phenomena on recovered accident scenarios. This analysis uses the newly released MELCOR 2.2 rev. 966 5 and MAAP5, Version 5.04. These code versions, which incorporate a significant number of modifications that have been driven by analyses and forensic evidence obtained from the Fukushima - Daiichi reactor site.
IPLOT, interactive MELCOR data plotting system
International Nuclear Information System (INIS)
2008-01-01
1 - Description of program or function: IPLOT is an interactive MELCOR data plotting system. It provides several kinds of GUI interfaces for a flexible data plotting. IPLOT capabilities include creation, saving and loading of user specified MELCOR variables trend graphs. IPLOT can use one or several plot files for a graph generation while the graphs can be either in one window or in several windows. Besides IPLOT provides several graph convenient functions such as zooming, re-sizing, printing for a detail analysis of severe accidents. 2 - Methods: Trend values seeking in a plot file is performed by a binary search method for fast performance. 3 - Restrictions on the complexity of the problem: MELCOR plot files are required for plotting
Melcor benchmarking against integral severe fuel damage tests
Energy Technology Data Exchange (ETDEWEB)
Madni, I.K. [Brookhaven National Lab., Upton, NY (United States)
1995-09-01
MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor nuclear power plants, and is being developed for the U.S. Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL). Brookhaven National Laboratory (BNL) has a program with the NRC to provide independent assessment of MELCOR, and a very important part of this program is to benchmark MELCOR against experimental data from integral severe fuel damage tests and predictions of that data from more mechanistic codes such as SCDAP or SCDAP/RELAP5. Benchmarking analyses with MELCOR have been carried out at BNL for five integral severe fuel damage tests, namely, PBF SFD 1-1, SFD 14, and NRU FLHT-2, analyses, and their role in identifying areas of modeling strengths and weaknesses in MELCOR.
Accident analyses on TMLB' and LOCA for KNGR using MELCOR code
Energy Technology Data Exchange (ETDEWEB)
Park, Soo Yong; Choi, Y.; Ahn, K.I
2000-11-01
Plant specific phenomenological analyses for the Korean Next Generation Reactor, using MELCOR program, are described in this report. The most important two accident sequences, a station blackout and a loss of coolant scenario, are selected. Complete coverage of corium behavior both in-vessel and ex-vessel, and the corresponding containment responses, are analyzed. The in-vessel progression includes the thermal hydraulics in the primary system, core heat up, hydrogen generation, and melt progression up to the reactor vessel breach. The ex-vessel progression describes molten corium - concrete interaction phenomena and the pressure behavior in the containment atmosphere.
Quench/reflood modeling in MELCOR
International Nuclear Information System (INIS)
Gauntt, R.O.
2001-01-01
The authors describe the reactor accident simulation model MELCOR. It comprises hydrodynamic investigations on reactor core quenching, hydrogen generation in the reactor core vessel, quench front advances. Preliminary comparisons to data are reasonable but need further validation. (uke)
International Nuclear Information System (INIS)
Cortes M, F.S.; Ramos P, J.C.; Nelson E, P.; Chavez M, C.
2004-01-01
This work describes the development of the Severe Accidents Module (MAS) based on the Code MELCOR and its incorporation to the Simulator of Classroom of the Group of Nuclear Engineering of the Engineering Faculty (GrINFI) of the National Autonomous University of Mexico (UNAM). The module of Severe Accidents has the purpose of counting with installed and operational capacity for the simulation of accident sequences with capacitation purposes, training, analysis and design. A shallow description of SimAula is presented, and the philosophy used to obtain the interactive version of MELCOR are discussed, as well as its implementation in the atmosphere of SimAula. Finally, after confirming the correct operation of the development of the tool, some possible topics are discussed for specific applications of the MAS. (Author)
MELCOR computer code manuals: Primer and user's guides, Version 1.8.3 September 1994. Volume 1
International Nuclear Information System (INIS)
Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.
1995-03-01
MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the US Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users' Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package
Improvement of a combustion model in MELCOR code
International Nuclear Information System (INIS)
Ogino, Masao; Hashimoto, Takashi
1999-01-01
NUPEC has been improving a hydrogen combustion model in MELCOR code for severe accident analysis. In the proposed combustion model, the flame velocity in a node was predicted using five different flame front shapes of fireball, prism, bubble, spherical jet, and plane jet. For validation of the proposed model, the results of the Battelle multi-compartment hydrogen combustion test were used. The selected test cases for the study were Hx-6, 13, 14, 20 and Ix-2 which had two, three or four compartments under homogeneous hydrogen concentration of 5 to 10 vol%. The proposed model could predict well the combustion behavior in multi-compartment containment geometry on the whole. MELCOR code, incorporating the present combustion model, can simulate combustion behavior during severe accident with acceptable computing time and some degree of accuracy. The applicability study of the improved MELCOR code to the actual reactor plants will be further continued. (author)
The MELCOR peer review process and findings
International Nuclear Information System (INIS)
Boyack, B.E.; Dhir, V.K.; Haste, T.J.; Gieseke, J.A.; Viskanta, R.; Kenton, M.A.; Khatib-Rahbar, M.; Leonard, M.T.
1991-01-01
MELCOR is a fully integrated, engineering-level computer code the models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the US Nuclear Regulatory Commission (NRC) as a second-generation plant risk assessment tool and as the successor to the Source Term Code Package. MELCOR has been under development since 1982. The code has now reached sufficient maturity that a number of organizations inside and outside the NRC are using or are planning to use the code. Although the quality control and validation efforts are in progress, the NRC identified the need to have a broad technical review of recognized experts to determine or confirm the technical adequacy of the code for the serious and complex analyses it is expected to perform. A peer review committee was organized using recognized experts from the national laboratories, universities, MELCOR user community, and independent contractors to perform this assessment. The objective of this paper is to summarize the peer review process and to summarize the findings of the MELCOR Peer Review Committee formed to conduct the MELCOR peer review
International Nuclear Information System (INIS)
Neymotin, L.
1994-04-01
Over the past several years, the OECD/NEA and CEC sponsored an international program intercomparing a group of six probabilistic consequence assessment (PCA) codes designed to simulate health and economic consequences of radioactive releases into atmosphere of radioactive materials following severe accidents at nuclear power plants (NPPs): ARANO (Finland), CONDOR (UK), COSYMA (CEC), LENA (Sweden), MACCS (USA), and OSCAAR (Japan). In parallel with this effort, two separate groups performed similar calculations using the MACCS and COSYMA codes. Results produced in the MACCS Users Group (Greece, Italy, Spain, and USA) calculations and their comparison are contained in the present report. Version 1.5.11.1 of the MACCS code was used for the calculations. Good agreement between the results produced in the four participating calculations has been reached, with the exception of the results related to the ingestion pathway dose predictions. The main reason for the scatter in those particular results is attributed to the lack of a straightforward implementation of the specifications for agricultural production and counter-measures criteria provided for the exercise. A significantly smaller scatter in predictions of other consequences was successfully explained by differences in meteorological files and weather sampling, grids, rain distance intervals, dispersion model options, and population distributions
Energy Technology Data Exchange (ETDEWEB)
Szabo, Tobias
2014-09-01
The risk of a hydrogen combustion within a containment of a pressurized water reactor during a severe loss of coolant accident (LOCA) is evaluated using numerical simulations. The code MELCOR provides integral analysis capabilities for severe accidents. Yet, its Lumped Parameter (LP) model provides less accurate information about on thermal hydraulics within the containment during a LOCA. GASFLOW is a CFD code that simulates both the local hydrogen distribution and the pressure inside the containment more realistically. Currently, to perform these GASFLOW simulations, the common procedure is to use a source term from a previous MELCOR calculation. However, with this approach, the influence of the more realistic GASFLOW pressure on the mass flow through the leak cannot be taken into account. This inconsistency is overcome by coupling both codes in this thesis. Here, the MELCOR instance is responsible for the primary and secondary systems. At the same time, the GASFLOW instance predicts the thermal hydraulics of the containment. The more accurate containment pressure from the GASFLOW instance is used in the MELCOR instance to calculate consistent outflow rates through the leak. In order to couple both codes, the existing interface in MELCOR is modified and a new interface for GASFLOW is developed and implemented. To begin with, the hydrogen distribution inside a generic containment is calculated by MELCOR using a typical coarse LP nodalization and a refined one. The results obtained are compared to a GASFLOW simulation. It is shown that the refinement only leads to a better agreement with the GASFLOW result if the correct flow directions are predefined by the nodalization. The safety relevant, local peak concentrations of hydrogen cannot be resolved by MELCOR. Consequently, the use of the CFD code is indispensable. The correct functioning of the coupling is proven within four steps. At first, the modified MELCOR interface is checked by computing a test case using two
International Nuclear Information System (INIS)
Jimenez Garcia, M.A.; Martin-Fuertes, F.; Martin-Valdepenas, J.M.
1997-01-01
Combustion of the hydrogen released to the containment during a severe accident is one of the issues to establish the real threats to the third barrier integrity in nuclear power facilities. Computational efforts on management procedures, such as the containment spray operation, are being addressed at the CTN-UPM to cope with the problem. On top of this, studies about in-containment hydrogen distribution and combustion are currently carried out with the codes MELCOR 1.8.3 and ESTER 1.0-RALOC 2.2. In this study, MELCOR 1.8.3 has been validated against the NUPEC M-7-1 Test, which already showed in 1993 that a good agreement was reached out when the previous MELCOR 1.8.2 calculations were performed regarding to the helium distribution throughout the facility. Nevertheless, some discrepancies were detected when analysing wall and atmosphere temperatures. Generally, well-mixed atmosphere scenarios, in which the role played by the containment water spraying is of the major importance, appear when such a mechanism promotes the onset of convection driven flow patterns that rapidly homogenize the gas properties. The purpose of the new MELCOR 1.8.3 assessment is to take advantage of the newest implemented models to obtain a more realistic thermalhydraulics simulation. A variation case was also performed to highlight the influence of water spray operation. In a second part of the study, insights coming from the previous work were used to apply MELCOR 1.8.3 models to a SBO severe accident scenario management in a commercial 2700 MWt 3-loop W PWR containment
Insight from Fukushima Daiichi Unit 3 Investigations using MELCOR
International Nuclear Information System (INIS)
Robb, Kevin R.; Francis, Matthew W.; Ott, Larry J.
2014-01-01
During the emergency response period of the accidents that took place at Fukushima Daiichi in March of 2011, researchers at Oak Ridge National Laboratory (ORNL) conducted a number of studies using the MELCOR code to help understand what was occurring and what had occurred. During the post-accident period, the Department of Energy (DOE) and the US Nuclear Regulatory Commission (NRC) jointly sponsored a study of the Fukushima Daiichi accident with collaboration among Oak Ridge, Sandia, and Idaho national laboratories. The purpose of the study was to compile relevant data, reconstruct the accident progression using computer codes, assess the codes predictive capabilities, and identify future data needs. The current paper summarizes some of the early MELCOR simulations and analyses conducted at ORNL of the Fukushima Daiichi Unit 3 accident. Extended analysis and discussion of the Unit 3 accident is also presented taking into account new knowledge and modeling refinements made since the joint DOE/NRC study
MELCOR 1.8.1 Assessment: LOFT integral experiment LP-FP-2
International Nuclear Information System (INIS)
Kmetyk, L.N.
1992-12-01
The MELCOR code has been used to model experiment LP-FP-2, an important source of integral data for qualifying severe accident code predictive capabilities. This assessment analysis clearly demonstrates MELCOR's ability to fulfill a large part of its primary, intended use, the calculation of severe accidents from full-power steady-state initiation through primary-system thermal/hydraulic response and core damage to fission product release, transport and deposition. After a number of code errors were identified and corrected, few nonstandard inputs and no code problem-specific modifications were needed to provide reasonable agreement with test data in all areas considered. Code-to-code comparisons show that MELCOR does at least as well as other ''best-estimate'' (i.e., SCDAP/RELAP5) or integral (i.e., MAAP) codes in predicting the thermal/hydraulic and core responses in this large-scale, integral experiment; in fact, MELCOR and MAAP appear to give the best agreement with data, especially for clad temperature histories. Further, our code-to-code comparisons indicate that MELCOR does at least as well as ''best-estimate'' fission product codes in predicting the source term, with a number of such codes having to be run in tandem and driven by test data or other ''best-estimate'' thermal/hydraulic and core damage codes to provide results equivalent to a single, integrated MELCOR calculation
Development of a MELCOR self-initialization algorithm for boiling water reactors
International Nuclear Information System (INIS)
Chien, C.S.; Wang, S.J.; Cheng, S.K.
1996-01-01
The MELCOR code, developed by Sandia National Laboratories, is suitable for calculating source terms and simulating severe accident phenomena of nuclear power plants. Prior to simulating a severe accident transient with MELCOR, the initial steady-state conditions must be generated in advance. The current MELCOR users' manuals do not provide a self-initialization procedure; this is the reason users have to adjust the initial conditions by themselves through a trial-and-error approach. A MELCOR self-initialization algorithm for boiling water reactor plants has been developed, which eliminates the tedious trial-and-error procedures and improves the simulation accuracy. This algorithm adjusts the important plant variable such as the dome pressure, downcomer level, and core flow rate to the desired conditions automatically. It is implemented through input with control functions provided in MELCOR. The reactor power and feedwater temperature are fed as input data. The initialization work of full-power conditions of the Kuosheng nuclear power station is cited as an example. These initial conditions are generated successfully with the developed algorithm. The generated initial conditions can be stored in a restart file and used for transient analysis. The methodology in this study improves the accuracy and consistency of transient calculations. Meanwhile, the algorithm provides all MELCOR users an easy and correct method for establishing the initial conditions
Progress in MELCOR development and assessment
International Nuclear Information System (INIS)
Summers, R.M.; Kmetyk, L.N.; Cole, R.K. Jr.; Smith, R.C.; Elsbernd, A.E.; Stuart, D.S.; Thompson, S.L.
1995-01-01
MELCOR models the progression of severe accidents in light water reactor nuclear power plants. Recent efforts in MELCOR development to incorporate CORCON-Mod3 models for core-concrete interactions, new models for advanced reactors, and improvements to several other existing models have resulted in release of MELCOR 1.8.3. In addition, continuing efforts to expand the code assessment database have filled in many of the gaps in phenomenological coverage. Efforts are now under way to develop models for chemical interactions of fission products with structural surfaces and for reactions of iodine in the presence of water, and work is also in progress to improve models for the scrubbing of fission products by water pools, the chemical reactions of boron carbide with steam, and the coupling of flow blockages with the hydrodynamics. Several code assessment analyses are in progress, and more are planned
ASTEC and MELCOR comparison for a VVER-1000 60 mm small break LOCA
International Nuclear Information System (INIS)
Georgieva, J.; Stefanova, A.; Groudev, P.; Tusheva, P.; Mladenov, I.; Dimov, D.; Passalacqua, R.
2005-01-01
In this paper a comparison between severe accident calculations performed for a WWER 1000 with the ASTEC1.1v0 and MELCOR 1.8.5 computer codes for a small break LOCA (ID 60 mm) without intervention of hydro accumulators is presented. This investigation has been performed in the framework of the SARNET project under the EURATOM 6th framework program. Once the accident sequence scenario is specified, both codes (MELCORE and ASTEC) are able to determine the core and containment damaged states, to estimate the release of radionuclides from the fuel as well as from the primary circuit and containment. Theses results are used to estimate the maximum period of the time during which the personnel could still take particular decisions in order to mitigate such an accident. The aim of the performed analysis is to estimate the discrepancy between ASTEC and MELCORE 1.8.5 calculations. Such discrepancies will be studied, if the case, proposal for ASTEC improvements will be made. Also the ASTEC capability to simulate specific reactor accident scenarios and/or particular safety systems will be tested. The final target is to propose severe accident management procedure for WWER 1000 reactors. In conclusions, the analysis for a small break LOCA (ID 60 mm without hydroelectricities) has shown some discrepancies between ASTEC and MELCORE especially during the degradation of the core. Further analyses are planed in which the MELCORE temperature 'set point' for core degradation (2520 K) will be progressively increased to approach the ASTEC one (which has been estimated to be about 3200 K). The comparison of the new results will allow a better evaluation of the in-vessel models implemented in ASTEC
Modifications made to the MELCOR Code for Analyzing Lithium Fires in Fusion Reactors
International Nuclear Information System (INIS)
Merrill, B.J.
2000-01-01
This report documents initial modifications made to the MELCOR code that allows MELCOR to predict the consequences of lithium spill accidents for evolving fusion reactor designs. These modifications include thermodynamic and transport properties for lithium, and physical models for predicting the rate of reaction of and energy production from the lithium-air reaction. A benchmarking study was performed with this new MELCOR capability. Two lithium-air reaction tests conducted at the Hanford Engineering Development Laboratory (HEDL) were selected for this benchmark study. Excellent agreement was achieved between MELCOR predictions and measured data. Recommendations for modeling lithium fires with MELCOR and for future work in this area are included in this report
Application of FFTBM with signal mirroring to improve accuracy assessment of MELCOR code
International Nuclear Information System (INIS)
Saghafi, Mahdi; Ghofrani, Mohammad Bagher; D’Auria, Francesco
2016-01-01
Highlights: • FFTBM-SM is an improved Fast Fourier Transform Base Method by signal mirroring. • FFTBM-SM has been applied to accuracy assessment of MELCOR code predictions. • The case studied was Station Black-Out accident in PSB-VVER integral test facility. • FFTBM-SM eliminates fluctuations of accuracy indices when signals sharply change. • Accuracy assessment is performed in a more realistic and consistent way by FFTBM-SM. - Abstract: This paper deals with the application of Fast Fourier Transform Base Method (FFTBM) with signal mirroring (FFTBM-SM) to assess accuracy of MELCOR code. This provides deeper insights into how the accuracy of MELCOR code in predictions of thermal-hydraulic parameters varies during transients. The case studied was modeling of Station Black-Out (SBO) accident in PSB-VVER integral test facility by MELCOR code. The accuracy of this thermal-hydraulic modeling was previously quantified using original FFTBM in a few number of time-intervals, based on phenomenological windows of SBO accident. Accuracy indices calculated by original FFTBM in a series of time-intervals unreasonably fluctuate when the investigated signals sharply increase or decrease. In the current study, accuracy of MELCOR code is quantified using FFTBM-SM in a series of increasing time-intervals, and the results are compared to those with original FFTBM. Also, differences between the accuracy indices of original FFTBM and FFTBM-SM are investigated and correction factors calculated to eliminate unphysical effects in original FFTBM. The main findings are: (1) replacing limited number of phenomena-based time-intervals by a series of increasing time-intervals provides deeper insights about accuracy variation of the MELCOR calculations, and (2) application of FFTBM-SM for accuracy evaluation of the MELCOR predictions, provides more reliable results than original FFTBM by eliminating the fluctuations of accuracy indices when experimental signals sharply increase or
Application of FFTBM with signal mirroring to improve accuracy assessment of MELCOR code
Energy Technology Data Exchange (ETDEWEB)
Saghafi, Mahdi [Department of Energy Engineering, Sharif University of Technology, Azadi Avenue, Tehran (Iran, Islamic Republic of); Ghofrani, Mohammad Bagher, E-mail: ghofrani@sharif.edu [Department of Energy Engineering, Sharif University of Technology, Azadi Avenue, Tehran (Iran, Islamic Republic of); D’Auria, Francesco [San Piero a Grado Nuclear Research Group (GRNSPG), University of Pisa, Via Livornese 1291, San Piero a Grado, Pisa (Italy)
2016-11-15
Highlights: • FFTBM-SM is an improved Fast Fourier Transform Base Method by signal mirroring. • FFTBM-SM has been applied to accuracy assessment of MELCOR code predictions. • The case studied was Station Black-Out accident in PSB-VVER integral test facility. • FFTBM-SM eliminates fluctuations of accuracy indices when signals sharply change. • Accuracy assessment is performed in a more realistic and consistent way by FFTBM-SM. - Abstract: This paper deals with the application of Fast Fourier Transform Base Method (FFTBM) with signal mirroring (FFTBM-SM) to assess accuracy of MELCOR code. This provides deeper insights into how the accuracy of MELCOR code in predictions of thermal-hydraulic parameters varies during transients. The case studied was modeling of Station Black-Out (SBO) accident in PSB-VVER integral test facility by MELCOR code. The accuracy of this thermal-hydraulic modeling was previously quantified using original FFTBM in a few number of time-intervals, based on phenomenological windows of SBO accident. Accuracy indices calculated by original FFTBM in a series of time-intervals unreasonably fluctuate when the investigated signals sharply increase or decrease. In the current study, accuracy of MELCOR code is quantified using FFTBM-SM in a series of increasing time-intervals, and the results are compared to those with original FFTBM. Also, differences between the accuracy indices of original FFTBM and FFTBM-SM are investigated and correction factors calculated to eliminate unphysical effects in original FFTBM. The main findings are: (1) replacing limited number of phenomena-based time-intervals by a series of increasing time-intervals provides deeper insights about accuracy variation of the MELCOR calculations, and (2) application of FFTBM-SM for accuracy evaluation of the MELCOR predictions, provides more reliable results than original FFTBM by eliminating the fluctuations of accuracy indices when experimental signals sharply increase or
PHEBUS FPT-1 simulation by using MELCOR and primary blockage model exploration
Energy Technology Data Exchange (ETDEWEB)
Wang, Jun [Institite of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Wang, Chen [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Department of Engineering Physics, Tsinghua University, Beijing 100084 (China); Corradini, Michael L.; Haskin, Troy [College of Engineering, The University of Wisconsin-Madison, Madison 53706 (United States); Tian, Wenxi; Su, Guanghui [Institite of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China); Qiu, Suizheng, E-mail: szqiu@mail.xjtu.edu.cn [Institite of Nuclear Science and Technology, Xi’an Jiaotong University, Xi’an 710049 (China)
2016-10-15
Highlights: • Flow channel blockage model is expected to be the key parameter for hydrogen generation calculation. • Flow channel blockage situation is studied in this work. • MELCOR is used as the tool, and PHEBUS FPT1 is used as benchmark. • Model sensitivity analysis on hydrogen generation will be done in next step. - Abstract: Recently, MAAP and MELCOR research teams completed a set of accident simulations to reconstruct the Fukushima-Daiichi accident in order to better understand severe accident progression. One result from this work is that the predicted hydrogen generation in MELCOR is notably more than that in MAAP. The fuel rod degradation process (i.e., debris formation and blockage models) may be responsible for this difference and opportunity exists to understand the key reasons for the difference. To examine this hypothesis, in this paper, the PHEBUS FPT1 experiment is selected as a benchmark test and MELCOR is used as the analysis tool. MELCOR calculation results are compared with PHEBUS FPT1 data to verify our model. Based on the validation of a nominal MELCOR simulation of the FPT1 test, we use the volume fractions of each component to visualize the debris-blockage geometric arrangement for PHEBUS FPT1 as the fuel degradation event proceeds. Cloud figures for the volume fractions of each component such as flow volume fraction, cladding volume fraction, fuel rod volume fraction, supporting material volume fraction, non-supporting material volume fraction and debris bed porosity fraction are shown in this paper. The results provide us with a visualized approach for improving our understanding of core degradation.
PHEBUS FPT-1 simulation by using MELCOR and primary blockage model exploration
International Nuclear Information System (INIS)
Wang, Jun; Wang, Chen; Corradini, Michael L.; Haskin, Troy; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng
2016-01-01
Highlights: • Flow channel blockage model is expected to be the key parameter for hydrogen generation calculation. • Flow channel blockage situation is studied in this work. • MELCOR is used as the tool, and PHEBUS FPT1 is used as benchmark. • Model sensitivity analysis on hydrogen generation will be done in next step. - Abstract: Recently, MAAP and MELCOR research teams completed a set of accident simulations to reconstruct the Fukushima-Daiichi accident in order to better understand severe accident progression. One result from this work is that the predicted hydrogen generation in MELCOR is notably more than that in MAAP. The fuel rod degradation process (i.e., debris formation and blockage models) may be responsible for this difference and opportunity exists to understand the key reasons for the difference. To examine this hypothesis, in this paper, the PHEBUS FPT1 experiment is selected as a benchmark test and MELCOR is used as the analysis tool. MELCOR calculation results are compared with PHEBUS FPT1 data to verify our model. Based on the validation of a nominal MELCOR simulation of the FPT1 test, we use the volume fractions of each component to visualize the debris-blockage geometric arrangement for PHEBUS FPT1 as the fuel degradation event proceeds. Cloud figures for the volume fractions of each component such as flow volume fraction, cladding volume fraction, fuel rod volume fraction, supporting material volume fraction, non-supporting material volume fraction and debris bed porosity fraction are shown in this paper. The results provide us with a visualized approach for improving our understanding of core degradation.
Development of health effect assessment software using MACCS2 code
International Nuclear Information System (INIS)
Hwang, Seok-Won; Park, Jong-Woon; Kang, Kyung Min; Jae, Moosung
2008-01-01
The extended regulatory interests in severe accidents management and enhanced safety regulatory requirements raise a need of more accurate analysis of the effect to the public health by users with diverse disciplines. This facilitates this work to develop web-based radiation health effect assessment software, RASUM, by using the MACCS2 code and HTML language to provide diverse users (regulators, operators, and public) with easy understanding, modeling, calculating, analyzing, documenting and reporting of the radiation health effect under hypothetical severe accidents. The engine of the web-based RASUM uses the MACCS2 as a base code developed by NRC and is composed of five modules such as development module, PSA training module, output module, input data module (source term, population distribution, meteorological data, etc.), and MACCS2 run module. For verification and demonstration of the RASUM, the offsite consequence analysis using the RASUM frame is performed for such as early fatality risk, organ does, and whole body does for two selected scenarios. Moreover, CCDF results from the RASUM for KSNP and CANDU type reactors are presented and compared. (author)
Energy Technology Data Exchange (ETDEWEB)
Cortes M, F.S.; Ramos P, J.C.; Nelson E, P.; Chavez M, C. [Facultad de Ingenieria, Division de Ingenieria Electrica, Grupo de Ingenieria Nuclear, UNAM, Ciudad Universitaria, Distrito Federal (Mexico)]. E-mail: samuelcortes@correo.unam.mx
2004-07-01
This work describes the development of the Severe Accidents Module (MAS) based on the Code MELCOR and its incorporation to the Simulator of Classroom of the Group of Nuclear Engineering of the Engineering Faculty (GrINFI) of the National Autonomous University of Mexico (UNAM). The module of Severe Accidents has the purpose of counting with installed and operational capacity for the simulation of accident sequences with capacitation purposes, training, analysis and design. A shallow description of SimAula is presented, and the philosophy used to obtain the interactive version of MELCOR are discussed, as well as its implementation in the atmosphere of SimAula. Finally, after confirming the correct operation of the development of the tool, some possible topics are discussed for specific applications of the MAS. (Author)
NSRD-10: Leak Path Factor Guidance Using MELCOR
Energy Technology Data Exchange (ETDEWEB)
Louie, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-03-01
Estimates of the source term from a U.S. Department of Energy (DOE) nuclear facility requires that the analysts know how to apply the simulation tools used, such as the MELCOR code, particularly for a complicated facility that may include an air ventilation system and other active systems that can influence the environmental pathway of the materials released. DOE has designated MELCOR 1.8.5, an unsupported version, as a DOE ToolBox code in its Central Registry, which includes a leak-path-factor guidance report written in 2004 that did not include experimental validation data. To continue to use this MELCOR version requires additional verification and validations, which may not be feasible from a project cost standpoint. Instead, the recent MELCOR should be used. Without any developer support and lack of experimental data validation, it is difficult to convince regulators that the calculated source term from the DOE facility is accurate and defensible. This research replaces the obsolete version in the 2004 DOE leak path factor guidance report by using MELCOR 2.1 (the latest version of MELCOR with continuing modeling development and user support) and by including applicable experimental data from the reactor safety arena and from applicable experimental data used in the DOE-HDBK-3010. This research provides best practice values used in MELCOR 2.1 specifically for the leak path determination. With these enhancements, the revised leak-path-guidance report should provide confidence to the DOE safety analyst who would be using MELCOR as a source-term determination tool for mitigated accident evaluations.
Application of the MELCOR code to design basis PWR large dry containment analysis.
Energy Technology Data Exchange (ETDEWEB)
Phillips, Jesse; Notafrancesco, Allen (USNRC, Office of Nuclear Regulatory Research, Rockville, MD); Tills, Jack Lee (Jack Tills & Associates, Inc., Sandia Park, NM)
2009-05-01
The MELCOR computer code has been developed by Sandia National Laboratories under USNRC sponsorship to provide capability for independently auditing analyses submitted by reactor manufactures and utilities. MELCOR is a fully integrated code (encompassing the reactor coolant system and the containment building) that models the progression of postulated accidents in light water reactor power plants. To assess the adequacy of containment thermal-hydraulic modeling incorporated in the MELCOR code for application to PWR large dry containments, several selected demonstration designs were analyzed. This report documents MELCOR code demonstration calculations performed for postulated design basis accident (DBA) analysis (LOCA and MSLB) inside containment, which are compared to other code results. The key processes when analyzing the containment loads inside PWR large dry containments are (1) expansion and transport of high mass/energy releases, (2) heat and mass transfer to structural passive heat sinks, and (3) containment pressure reduction due to engineered safety features. A code-to-code benchmarking for DBA events showed that MELCOR predictions of maximum containment loads were equivalent to similar predictions using a qualified containment code known as CONTAIN. This equivalency was found to apply for both single- and multi-cell containment models.
International Nuclear Information System (INIS)
Leonard, M.T.; Ashbaugh, S.G.; Cole, R.K.; Bergeron, K.D.; Nagashima, K.
1996-01-01
This paper presents a comparison of calculations of severe accident progression for several postulated accident sequences for representative Pressurized Water Reactors (PWR) and Boiling Water Reactors (BWR) nuclear power plants performed with the MELCOR 1.8.3 and the MAAP4 computer codes. The PWR system examined in this study is a 1100 MWe system similar in design to a Westinghouse 3-loop plant with a large dry containment; the BWR is a 1100 MWe system similar in design to General Electric BWR/4 with a Mark I containment. A total of nine accident sequences were studied with both codes. Results of these calculations are compared to identify major differences in the timing of key events in the calculated accident progression or other important aspects of severe accident behavior, and to identify specific sources of the observed differences
MELCOR 1.8.2 assessment: Surry PWR TMLB' (with a DCH study)
International Nuclear Information System (INIS)
Kmetyk, L.N.; Cole, R.K. Jr.; Smith, R.C.; Summers, R.M.; Thompson, S.L.
1994-02-01
MELCOR is a fully integrated, engineering-level computer code, being developed at Sandia National Laboratories for the USNRC. This code models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRs. As part of an ongoing assessment program, the MELCOR computer code has been used to analyze a station blackout transient in Surry, a three-loop Westinghouse PWR. Basecase results obtained with MELCOR 1.8.2 are presented, and compared to earlier results for the same transient calculated using MELCOR 1.8.1. The effects of new models added in MELCOR 1.8.2 (in particular, hydrodynamic interfacial momentum exchange, core debris radial relocation and core material eutectics, CORSOR-Booth fission product release, high-pressure melt ejection and direct containment heating) are investigated individually in sensitivity studies. The progress in reducing numeric effects in MELCOR 1.8.2, compared to MELCOR 1.8.1, is evaluated in both machine-dependency and time-step studies; some remaining sources of numeric dependencies (valve cycling, material relocation and hydrogen burn) are identified
Reevaluation of the emergency planning zone for nuclear power plants in Taiwan using MACCS2 code
International Nuclear Information System (INIS)
Wu, J.; Yang, Y.-M.; Chen, I.-J.; Chen, H.-T.; Chuang, K.-S.
2006-01-01
According to government regulations, the emergency planning zone (EPZ) of a nuclear power plant (NPP) must be designated before operation and reevaluated every 5 years. Corresponding emergency response planning (ERP) has to be made in advance to guarantee that all necessary resources are available under accidental releases of radioisotope. In this study, the EPZ for each of the three operating NPPs, Chinshan, Kuosheng, and Maanshan, in Taiwan was reevaluated using the MELCOR Accident Consequence Code System 2 (MACCS2) developed by Sandia National Laboratory. Meteorological data around the nuclear power plant were collected during 2003. The source term data including inventory, sensible heat content, and timing duration, were based on previous PRA information of each plant. The effective dose equivalent and thyroid dose together with the related individual risk and societal risk were calculated. By comparing the results to the protective action guide and related safety criteria, 1.5, 1.5, and 4.5 km were estimated for Chinshan, Kuosheng, and Maanshan NPPs, respectively. We suggest that a radius of 5.0 km is a reasonably conservative value of EPZ for each of the three operating NPPs in Taiwan
Assessment of CONTAIN and MELCOR for performing LOCA and LOVA analyses in ITER
International Nuclear Information System (INIS)
Merrill, B.J.; Hagrman, D.L.; Gaeta, M.J.; Petti, D.A.
1994-09-01
This report describes the results of an assessment of the CONTAIN and MELCOR computer codes for ITER LOCA and LOVA applications. As part of the assessment, the results of running a test problem that describes an ITER LOCA are presented. It is concluded that the MELCOR code should be the preferred code for ITER severe accident thermal hydraulic analyses. This code will require the least modification to be appropriate for calculating thermal hydraulic behavior in ITER relevant conditions that include vacuum, cryogenics, ITER temperatures, and the presence of a liquid metal test module. The assessment of the aerosol transport models in these codes concludes that several modifications would have to be made to CONTAIN and/or MELCOR to make them applicable to the aerosol transport part of severe accident analysis in ITER
International Nuclear Information System (INIS)
Helton, J.C.; Johnson, J.D.; McKay, M.D.; Shiver, A.W.; Sprung, J.L.
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the early health effects associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 34 imprecisely known input variables on the following reactor accident consequences are studied: number of early fatalities, number of cases of prodromal vomiting, population dose within 10 mi of the reactor, population dose within 1000 mi of the reactor, individual early fatality probability within 1 mi of the reactor, and maximum early fatality distance. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: scaling factor for horizontal dispersion, dry deposition velocity, inhalation protection factor for nonevacuees, groundshine shielding factor for nonevacuees, early fatality hazard function alpha value for bone marrow exposure, and scaling factor for vertical dispersion
Energy Technology Data Exchange (ETDEWEB)
Hsu, Wen-Sheng, E-mail: wshsu@ess.nthu.edu.tw [Nuclear Science and Technology Development Center, Institute of Nuclear Engineering and Science, National Tsing Hua University, Nuclear and New Energy Education and Research Foundation, No. 101, Section 2, Kuang Fu Rd., HsinChu 30013, Taiwan, ROC (China); Chiang, Yu, E-mail: s101013702@m101.nthu.edu.tw [Nuclear Science and Technology Development Center, Institute of Nuclear Engineering and Science, National Tsing Hua University, Nuclear and New Energy Education and Research Foundation, No. 101, Section 2, Kuang Fu Rd., HsinChu 30013, Taiwan, ROC (China); Wang, Jong-Rong, E-mail: jongrongwang@gmail.com [Nuclear Science and Technology Development Center, Institute of Nuclear Engineering and Science, National Tsing Hua University, Nuclear and New Energy Education and Research Foundation, No. 101, Section 2, Kuang Fu Rd., HsinChu 30013, Taiwan, ROC (China); Wang, Ting-Yi, E-mail: minired1119@gmail.com [Nuclear Science and Technology Development Center, Institute of Nuclear Engineering and Science, National Tsing Hua University, Nuclear and New Energy Education and Research Foundation, No. 101, Section 2, Kuang Fu Rd., HsinChu 30013, Taiwan, ROC (China); Wang, Te-Chuan, E-mail: tcwang@iner.gov.tw [Institute of Nuclear Energy Research Atomic Energy Council, R.O.C., 1000, Wenhua Road Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Teng, Jyh-Tong, E-mail: jyhtong@cycu.edu.tw [Department of Mechanical Engineering, Chung Yuan Christian University, 200, Chung Pei Rd, Chung Li 32023, Taiwan, ROC (China); Chen, Shao-Wen, E-mail: chensw@mx.nthu.edu.tw [Nuclear Science and Technology Development Center, Institute of Nuclear Engineering and Science, National Tsing Hua University, Nuclear and New Energy Education and Research Foundation, No. 101, Section 2, Kuang Fu Rd., HsinChu 30013, Taiwan, ROC (China); and others
2017-01-15
Highlights: • The establishment of a MELCOR/SNAP model of Chinshan (BWR/4). • MELCOR/SNAP model was used to estimate the effectiveness of URG for Chinshan. • The MELCOR results were compared to MAAP, TRACE and PCTRAN. • URG is a new method to prevent a Fukushima-like accident. • The low raw water (150 GPM) can make the cladding temperature below 1088.7 K. - Abstract: After Fukushima Daiichi disaster, the safety analysis of severe accidents became one of the safety concerns in Taiwan. The Emergency Operating Procedure (EOP) cannot cope with a multiple system failure situation under a severe accident since it is a “Symptom-basis” procedure. To deal with that, Taiwan Power Company built up a new strategy for Fukushima-like accident called Ultimate Response Guideline (URG). It is a simple strategy with three main conditions: loss of regular motor driven injection system, loss of all AC power and tsunami/earthquake warning. If two of three happen, the operating procedure will change from EOP to URG and start the main works by following the strategy. There are three main works in URG: controlled-depressurization, line up low pressure injection water and prepare containment venting. In this study, MELCOR2.1 was used to calculate the cases of URG and checked the goal of the strategy that prevents the accident or not. There were three steps in this research. First, a model of Chinshan nuclear power plant (NPP) was built. Second, one was the case with URG and the other was not by using the above MELCOR model. The results were compared to MAAP5.0, TRACE and PCTRAN. Finally, some sensitivity studies of depressurization and water injection rate were done.
International Nuclear Information System (INIS)
Reinke, Nils; Erdmann, Walter; Nowack, Holger; Sonnenkalb, Martin
2010-08-01
In the frame of the project RS1180 funded by the German Federal Ministry for Economics and Technology (BMWi) calculations have been carried out with the integral code ASTEC V1.33 p3 developed by GRS for two postulated accidents in a nuclear power plant with KONVOI type a pressurized water reactor and compared to calculations with MELCOR 1.8.6 YU. Major objective was to assess the capability of ASTEC for application in level 2 probabilistic safety analyses (PSA). In particular, it was investigated to which extent ASTEC is able to perform such integral calculations meeting criteria with regard to both reasonable calculation time and specific boundary conditions necessary for PSA analyses. Two exemplary accidents were selected: - A transient with loss of steam generator feed water, - A small break loss of coolant accident (50 cm 2 ) in the cold leg of the coolant line connected to the pressurizer. In principle, the results demonstrate the capability of ASTEC V1.33 to carry out such PSA level 2 calculations. In addition, it has to be noted that for both ASTEC and MELCOR the requirements in view of the quality of the results leads to prolonged calculation times due to more detailed nodalisations of the whole plant. This is valid for the core region as well as for the primary circuit and for the containment. Consequently, calculation times in the order of one day to two weeks are accomplished, thereby excluding extensive parameter analyses in order to assess the sensitivity of the calculation results. Concerning the quality of the results a good agreement can be stated between ASTEC and MELCOR results in terms of global data. In detail some results are sensitive to user effects. Here, the nodalisation seems to be of major influence besides differences in modeling specific phenomena. The comparison suggests that in particular the influence of the nodalisation defined by the user and depending on the user's experience should be carefully evaluated. Since some
International Nuclear Information System (INIS)
Kmetyk, L.N.; Brown, T.D.
1995-03-01
To gain a better understanding of the risk significance of low power and shutdown modes of operation, the Office of Nuclear Regulatory Research at the NRC established programs to investigate the likelihood and severity of postulated accidents that could occur during low power and shutdown (LP ampersand S) modes of operation at commercial nuclear power plants. To investigate the likelihood of severe core damage accidents during off power conditions, probabilistic risk assessments (PRAs) were performed for two nuclear plants: Unit 1 of the Grand Gulf Nuclear Station, which is a BWR-6 Mark III boiling water reactor (BWR), and Unit 1 of the Surry Power Station, which is a three-loop, subatmospheric, pressurized water reactor (PWR). The analysis of the BWR was conducted at Sandia National Laboratories while the analysis of the PWR was performed at Brookhaven National Laboratory. This multi-volume report presents and discusses the results of the BWR analysis. The subject of this part presents the deterministic code calculations, performed with the MELCOR code, that were used to support the development and quantification of the PRA models. The background for the work documented in this report is summarized, including how deterministic codes are used in PRAS, why the MELCOR code is used, what the capabilities and features of MELCOR are, and how the code has been used by others in the past. Brief descriptions of the Grand Gulf plant and its configuration during LP ampersand S operation and of the MELCOR input model developed for the Grand Gulf plant in its LP ampersand S configuration are given
Energy Technology Data Exchange (ETDEWEB)
Kmetyk, L.N.; Brown, T.D. [Sandia National Labs., Albuquerque, NM (United States)
1995-03-01
To gain a better understanding of the risk significance of low power and shutdown modes of operation, the Office of Nuclear Regulatory Research at the NRC established programs to investigate the likelihood and severity of postulated accidents that could occur during low power and shutdown (LP&S) modes of operation at commercial nuclear power plants. To investigate the likelihood of severe core damage accidents during off power conditions, probabilistic risk assessments (PRAs) were performed for two nuclear plants: Unit 1 of the Grand Gulf Nuclear Station, which is a BWR-6 Mark III boiling water reactor (BWR), and Unit 1 of the Surry Power Station, which is a three-loop, subatmospheric, pressurized water reactor (PWR). The analysis of the BWR was conducted at Sandia National Laboratories while the analysis of the PWR was performed at Brookhaven National Laboratory. This multi-volume report presents and discusses the results of the BWR analysis. The subject of this part presents the deterministic code calculations, performed with the MELCOR code, that were used to support the development and quantification of the PRA models. The background for the work documented in this report is summarized, including how deterministic codes are used in PRAS, why the MELCOR code is used, what the capabilities and features of MELCOR are, and how the code has been used by others in the past. Brief descriptions of the Grand Gulf plant and its configuration during LP&S operation and of the MELCOR input model developed for the Grand Gulf plant in its LP&S configuration are given.
MELCOR 1.8.2 Assessment: IET direct containment heating tests
Energy Technology Data Exchange (ETDEWEB)
Kmetyk, L.N.
1993-10-01
MELCOR is a fully integrated, engineering-level computer code, being developed at Sandia National Laboratories for the USNRC, that models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRS. As part of an ongoing assessment program, the MELCOR computer code has been used to analyze several of the IET direct containment heating experiments done at 1:10 linear scale in the Surtsey test facility at Sandia and at 1:40 linear scale in the corium-water thermal interactions (CWTI) COREXIT test facility at Argonne National Laboratory. These MELCOR calculations were done as an open post-test study, with both the experimental data and CONTAIN results available to guide the selection of code input. Basecase MELCOR results are compared to test data in order to evaluate the new HPME DCH model recently added in MELCOR version 1.8.2. The effect of various user-input parameters in the HPME model, which define both the initial debris source and the subsequent debris interaction, were investigated in sensitivity studies. In addition, several other non-default input modelling changes involving other MELCOR code packages were required in our IET assessment analyses in order to reproduce the observed experiment behavior. Several calculations were done to identify whether any numeric effects exist in our DCH IET assessment analyses.
A new emergency response model for MACCS. Final report
International Nuclear Information System (INIS)
Chanin, D.I.
1992-01-01
Under DOE sponsorship, as directed by the Los Alamos National Laboratory (LANL), the MACCS code (version 1.5.11.1) [Ch92] was modified to implement a series of improvements in its modeling of emergency response actions. The purpose of this effort has been to aid the Westinghouse Savannah River Company (WSRC) in its performance of the Level III analysis for the Savannah River Site (SRS) probabilistic risk analysis (PRA) of K Reactor [Wo90]. To ensure its usefulness to WSRC, and facilitate the new model's eventual merger with other MACCS enhancements, close cooperation with WSRC and the MACCS development team at Sandia National Laboratories (SNL) was maintained throughout the project. These improvements are intended to allow a greater degree of flexibility in modeling the mitigative actions of evacuation and sheltering. The emergency response model in MACCS version 1.5.11.1 was developed to support NRC analyses of consequences from severe accidents at commercial nuclear power plants. The NRC code imposes unnecessary constraints on DOE safety analyses, particularly for consequences to onsite worker populations, and it has therefore been revamped. The changes to the code have been implemented in a manner that preserves previous modeling capabilities and therefore prior analyses can be repeated with the new code
MELCOR 1.8.2 assessment: The DF-4 BWR Damaged Fuel experiment
International Nuclear Information System (INIS)
Tautges, T.J.
1993-10-01
MELCOR is a fully integrated, engineering-level computer code being developed at Sandia National Laboratories for the USNRC, that models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRs. As a part of an ongoing assessment, program, MELCOR has been used to model the ACRR in-pile DF-4 Damaged Fuel experiment. DF-4 provided data for early phase melt progression in BWR fuel assemblies, particularly for phenomena associated with eutectic interactions in the BWR control blade and zircaloy oxidation in the canister and cladding. MELCOR provided good agreement with experimental data in the key areas of eutectic material behavior and canister and cladding oxidation. Several shortcomings associated with the MELCOR modeling of BWR geometries were found and corrected. Twenty-five sensitivity studies were performed on COR, HS and CVH parameters. These studies showed that the new MELCOR eutectics model played an important role in predicting control blade behavior. These studies revealed slight time step dependence and no machine dependencies. Comparisons made with the results from four best-estimate codes showed that MELCOR did as well as these codes in matching DF-4 experimental data
MELCOR/CONTAIN LMR Implementation Report - FY16 Progress.
Energy Technology Data Exchange (ETDEWEB)
Louie, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2016-11-01
This report describes the progress of the CONTAIN - LMR sodium physics and chemistry models to be implemented in MELCOR 2.1. In the past three years , the implementation included the addition of sodium equations of state and sodium properties from two different sources. The first source is based on the previous work done by Idaho National Laboratory by modifying MELCOR to include liquid lithium equation of state as a working fluid to model the nuclear fusion safety research. The second source uses properties generated for the SIMMER code. The implemented modeling has been tested and results are reported in this document. In addition, the CONTAIN - LMR code was derived from an early version of the CONTAIN code, and many physical models that were developed since this early version of CONTAIN are not available in this early code version. Therefore, CONTAIN 2 has been updated with the sodium models in CONTAIN - LMR as CONTAIN2 - LMR, which may be used to provide code-to-code comparison with CONTAIN - LMR and MELCOR when the sodium chemistry models from CONTAIN - LMR have been completed. Both the spray fire and pool fire chemistry routines from CONTAIN - LMR have been integrated into MELCOR 2.1, and debugging and testing are in progress. Because MELCOR only models the equation of state for liquid and gas phases of the coolant, a modeling gap still exists when dealing with experiments or accident conditions that take place when the ambient temperature is below the freezing point of sodium. An alternative method is under investigation to overcome this gap . We are no longer working on the separate branch from the main branch of MELCOR 2.1 since the major modeling of MELCOR 2.1 has been completed. At the current stage, the newly implemented sodium chemistry models will be a part of the main MELCOR release version (MELCOR 2.2). This report will discuss the accomplishments and issues relating to the implementation. Also, we will report on the planned completion of all
Calculations of core concrete interaction using MELCOR 1.8.5
Energy Technology Data Exchange (ETDEWEB)
Kim, Hwan Yeol; Song, Jin Ho; Kim, Hee Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
2005-07-01
OECD/MCCI project is scheduled for 4 years from 2002. 1 to 2005. 12 to perform a series of tests through which the data for cooling the molten core spread out at the reactor cavity and for the long-term CCI (Core Concrete Interaction) are secured. This paper deals with the transient calculations of the 2-D CCI tests performed under the OECD/MCCI project by using a well-known severe accident analysis code, MELCOR 1.8.5. The CCI test was performed at the rectangular geometry with one ablative bottom wall and two ablative and two non-ablative side walls. Since the MELCOR 1.8.5 can only accommodate a cylindrical geometry, an appropriate scaling methodology was applied to adjust the geometrical difference between the CCI test and the MELCOR calculations. The default heat transfer models contained in the CORCON-Mod3 module of MELCOR 1.8.5 were used for the base case calculation. The key parameters of the CCI phenomena such as the melt temperature, concrete ablation, cavity shape, gas generation, heat transfer rate, etc. were calculated and compared with the test results. In addition, sensitivity studies with the change of the inputs and character variables of MELCOR were also included.
Plutonium explosive dispersal modeling using the MACCS2 computer code
International Nuclear Information System (INIS)
Steele, C.M.; Wald, T.L.; Chanin, D.I.
1998-01-01
The purpose of this paper is to derive the necessary parameters to be used to establish a defensible methodology to perform explosive dispersal modeling of respirable plutonium using Gaussian methods. A particular code, MACCS2, has been chosen for this modeling effort due to its application of sophisticated meteorological statistical sampling in accordance with the philosophy of Nuclear Regulatory Commission (NRC) Regulatory Guide 1.145, ''Atmospheric Dispersion Models for Potential Accident Consequence Assessments at Nuclear Power Plants''. A second advantage supporting the selection of the MACCS2 code for modeling purposes is that meteorological data sets are readily available at most Department of Energy (DOE) and NRC sites. This particular MACCS2 modeling effort focuses on the calculation of respirable doses and not ground deposition. Once the necessary parameters for the MACCS2 modeling are developed and presented, the model is benchmarked against empirical test data from the Double Tracks shot of project Roller Coaster (Shreve 1965) and applied to a hypothetical plutonium explosive dispersal scenario. Further modeling with the MACCS2 code is performed to determine a defensible method of treating the effects of building structure interaction on the respirable fraction distribution as a function of height. These results are related to the Clean Slate 2 and Clean Slate 3 bunkered shots of Project Roller Coaster. Lastly a method is presented to determine the peak 99.5% sector doses on an irregular site boundary in the manner specified in NRC Regulatory Guide 1.145 (1983). Parametric analyses are performed on the major analytic assumptions in the MACCS2 model to define the potential errors that are possible in using this methodology
Plutonium explosive dispersal modeling using the MACCS2 computer code
Energy Technology Data Exchange (ETDEWEB)
Steele, C.M.; Wald, T.L.; Chanin, D.I.
1998-11-01
The purpose of this paper is to derive the necessary parameters to be used to establish a defensible methodology to perform explosive dispersal modeling of respirable plutonium using Gaussian methods. A particular code, MACCS2, has been chosen for this modeling effort due to its application of sophisticated meteorological statistical sampling in accordance with the philosophy of Nuclear Regulatory Commission (NRC) Regulatory Guide 1.145, ``Atmospheric Dispersion Models for Potential Accident Consequence Assessments at Nuclear Power Plants``. A second advantage supporting the selection of the MACCS2 code for modeling purposes is that meteorological data sets are readily available at most Department of Energy (DOE) and NRC sites. This particular MACCS2 modeling effort focuses on the calculation of respirable doses and not ground deposition. Once the necessary parameters for the MACCS2 modeling are developed and presented, the model is benchmarked against empirical test data from the Double Tracks shot of project Roller Coaster (Shreve 1965) and applied to a hypothetical plutonium explosive dispersal scenario. Further modeling with the MACCS2 code is performed to determine a defensible method of treating the effects of building structure interaction on the respirable fraction distribution as a function of height. These results are related to the Clean Slate 2 and Clean Slate 3 bunkered shots of Project Roller Coaster. Lastly a method is presented to determine the peak 99.5% sector doses on an irregular site boundary in the manner specified in NRC Regulatory Guide 1.145 (1983). Parametric analyses are performed on the major analytic assumptions in the MACCS2 model to define the potential errors that are possible in using this methodology.
A restructuring proposal based on MELCOR for severe accident analysis code development
Energy Technology Data Exchange (ETDEWEB)
Park, Sun Hee; Song, Y. M.; Kim, D. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)
2000-03-01
In order to develop a template based on existing MELCOR code, current data saving and transferring methods used in MELCOR are addressed first. Then a naming convention for the constructed module is suggested and an automatic program to convert old variables into new derived type variables has been developed. Finally, a restructured module for the SPR package has been developed to be applied to MELCOR. The current MELCOR code ensures a fixed-size storage for four different data types, and manages the variable-sized data within the storage limit by storing the data on the stacked packages. It uses pointer to identify the variables between the packages. This technique causes a difficult grasping of the meaning of the variables as well as memory waste. New features of FORTRAN90, however, make it possible to allocate the storage dynamically, and to use the user-defined data type which lead to a restructured module development for the SPR package. An efficient memory treatment and as easy understanding of the code are allowed in this developed module. The validation of the template has been done by comparing the results of the modified code with those from the existing code, and it is confirmed that the results are the same. The template for the SPR package suggested in this report hints the extension of the template to the entire code. It is expected that the template will accelerate the code domestication thanks to direct understanding of each variable and easy implementation of modified or newly developed models. 3 refs., 15 figs., 16 tabs. (Author)
Energy Technology Data Exchange (ETDEWEB)
Cansado, A.; Martinez, I.; Morales, T.
2015-07-01
The European Earth observation programme Copernicus, formerly known as GMES (Global Monitoring for Environment and Security) is establishing a core global and regional environmental atmospheric service as a component of the Europes Copernicus/GMES initiative through successive R and D projects led by ECMWF (European Center for Medium-range Weather Forecasting) and funded by the 6th and 7th European Framework Programme for Research and Horizon 2020 Programme: GEMS, MACC, MACC-II and MACC-III. AEMET (Spanish State Meteorological Agency) has participated in the projects MACC and MACC-II and continues participating in MACC-III (http://atmosphere.copernicus.eu). AEMET has contributed to those projects by generating highresolution (0.05 degrees) daily air-quality forecasts for the Western Mediterranean up to 48 hours aiming to analyse the dependence of the quality of forecasts on resolution. We monitor the evolution of different chemical species such as NO{sub 2}, O{sub 3}, CO y SO{sub 2} at surface and different vertical levels using the global model MOCAGE and the MACC Regional Ensemble forecasts as chemical boundary conditions. We will show different case-studies, where the considered chemical species present high values and will show a validation of the air-quality by comparing to some of the available air-quality observations (EMEP/GAW, regional -autonomous communities- and local -city councils- air-quality monitoring networks) over the forecast domain. The aim of our participation in these projects is helping to improve the understanding of the processes involved in the air-quality forecast in the Mediterranean where special factors such as highly populated areas together with an intense solar radiation make air-quality forecasting particularly challenging. (Author)
Energy Technology Data Exchange (ETDEWEB)
Cansado, A.; Martinez, I.; Morales, T.
2015-07-01
The European Earth observation programme Copernicus, formerly known as GMES (Global Monitoring for Environment and Security) is establishing a core global and regional environmental atmospheric service as a component of the Europe’s Copernicus/GMES initiative through successive R&D projects led by ECMWF (European Center for Medium-range Weather Forecasting) and funded by the 6th and 7th European Framework Programme for Research and Horizon 2020 Programme: GEMS, MACC, MACC-II and MACC-III. AEMET (Spanish State Meteorological Agency) has participated in the projects MACC and MACC-II and continues participating in MACC-III (http://atmosphere.copernicus.eu). AEMET has contributed to those projects by generating highresolution (0.05 degrees) daily air-quality forecasts for the Western Mediterranean up to 48 hours aiming to analyse the dependence of the quality of forecasts on resolution. We monitor the evolution of different chemical species such as NO2, O3, CO y SO2 at surface and different vertical levels using the global model MOCAGE and the MACC Regional Ensemble forecasts as chemical boundary conditions. We will show different case-studies, where the considered chemical species present high values and will show a validation of the air-quality by comparing to some of the available air-quality observations (EMEP/GAW, regional -autonomous communities- and local -city councils- air-quality monitoring networks) over the forecast domain. The aim of our participation in these projects is helping to improve the understanding of the processes involved in the air-quality forecast in the Mediterranean where special factors such as highly populated areas together with an intense solar radiation make air-quality forecasting particularly challenging. (Author)
Analysis of Severe Accident for the SFP under the Condition of Drainage using MELCOR
Energy Technology Data Exchange (ETDEWEB)
Oh, Jung-Min; Pack, Jae-Woo [Jeju National University, Jeju (Korea, Republic of)
2015-10-15
This study aims to analyze the effect of a LOCA of the spent fuel pool. We use the MECORE 1.8.6 code to compute the variation of the fuel cladding temperature after a completer loss of the cooling water in the spent fuel pool. A loss of coolant accident in a typical spent fuel pool has been simulated using the MELCOR 1.8.6 code to see the variation of key parameters such as the oxygen concentration in the fuel assembly region and the cladding temperature. In a commercial nuclear power plant, highly radioactive spent fuel assemblies unloaded from the nuclear reactor core are typically stored for a period of time in the spent fuel pool to reduce the radioactivity. The spent fuel assemblies are usually placed in long square racks. It is known that in the progress of the Fukushima nuclear power plant accident, the cooling water in the spent fuel storage was completely lost and the fuel was heated up and damaged. The simulation result shows that the cladding temperature exceeds the rupture temperature in most of the fuel rods and some part of the fuel rods suffers melting of the cladding.
Improvement of severe accident analysis method for KSNP
Energy Technology Data Exchange (ETDEWEB)
Park, Jae Hong [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Cho, Song Won; Cho, Youn Soo [Korea Radiation Technology Institute Co., Taejon (Korea, Republic of)
2002-03-15
The objective of this study is preparation of MELCOR 1.8.5 input deck for KSNP and simulation of some major severe accidents. The contents of this project are preparation of MELCOR 1.8.5 base input deck for KSNP to understand severe accident phenomena and to assess severe accident strategy, preparation of 20 cell containment input deck to simulate the distribution of hydrogen and fission products in containment, simulation of some major severe accident scenarios such as TLOFW, SBO, SBLOCA, MBLOCA, and LBLOCA. The method for MELCOR 1.8.5 input deck preparation can be used to prepare the input deck for domestic PWRs and to simulate severe accident experiments such as ISP-46. Information gained from analyses of severe accidents may be helpful to set up the severe accident management strategy and to develop regulatory guidance.
Modeling of the installation with the code MELCOR 1.8.4
International Nuclear Information System (INIS)
Pomier Baez, L.E.; Nunez Mc Leod, J.E.
1998-01-01
Full text: The calculation code MELCOR 1.8.4 is an integrated program that allow to simulate the development of accidents in nuclear plants with refrigerated reactors with light water. This code can simulate the whole spectrum of phenomenons. This work carried out the validation of the packages of the code MELCOR dedicated to evaluate the behaviour under conditions of two-phase flow, through the comparison of the results of the simulation with the experimental data of the installation TPTF (Two-Phase Test Facility) (ROSA-IV) of the Institute JAERI (Japan Atomic Energy Research Institute) of Japan. The main objective of the experiments TPTF is obtain data on the thermohydraulic behaviour from light water reactors (PWR) during an accident with small loss of coolant (SBLOCA), and the capacity of MELCOR code was evaluated in the simulation of these kind of accidents. Diverse options of the code were studies, in order to analyzing the behaviour of the feigned phenomenon. The effect of the change in the nodalization of the nuclear installation was studies, as well as the management of diverse control functions. The results of the evaluation show a good concordance with the experimental data, especially in the prediction of the behaviour of the steam fraction in relation with the mass flow, the quality of the steam and the mixture level in the exit volume that represent two possibilities state in the vessel reactor during the accidental situation. (author) [es
MELCOR Modeling of Air-Cooled PWR Spent Fuel Assemblies in Water empty Fuel Pools
Energy Technology Data Exchange (ETDEWEB)
Herranz, L. E.; Lopez, C.
2013-07-01
The OECD Spent Fuel Project (SFP) investigated fuel degradation in case of a complete Loss-Of- Coolant-Accident in a PWR spent fuel pool. Analyses of the SFP PWR ignition tests have been conducted with the 1.86.YT.3084.SFP MELCOR version developed by SNL. The main emphasis has been placed on assessing the MELCOR predictive capability to get reasonable estimates of time-to-ignition and fire front propagation under two configurations: hot neighbor (i.e., adiabatic scenario) and cold neighbor (i.e., heat transfer to adjacent fuel assemblies). A detailed description of hypotheses and approximations adopted in the MELCOR model are provided in the paper. MELCOR results accuracy was notably different between both scenarios. The reasons are highlighted in the paper and based on the results understanding a set of remarks concerning scenarios modeling is given.
International Nuclear Information System (INIS)
Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the food pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 87 imprecisely-known input variables on the following reactor accident consequences are studied: crop growing season dose, crop long-term dose, milk growing season dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, area dependent cost, crop disposal cost, milk disposal cost, condemnation area, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: fraction of cesium deposition on grain fields that is retained on plant surfaces and transferred directly to grain, maximum allowable ground concentrations of Cs-137 and Sr-90 for production of crops, ground concentrations of Cs-134, Cs-137 and I-131 at which the disposal of milk will be initiated due to accidents that occur during the growing season, ground concentrations of Cs-134, I-131 and Sr-90 at which the disposal of crops will be initiated due to accidents that occur during the growing season, rate of depletion of Cs-137 and Sr-90 from the root zone, transfer of Sr-90 from soil to legumes, transfer of Cs-137 from soil to pasture, transfer of cesium from animal feed to meat, and the transfer of cesium, iodine and strontium from animal feed to milk
International Nuclear Information System (INIS)
Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the food pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 87 imprecisely-known input variables on the following reactor accident consequences are studied: crop growing-season dose, crop long-term dose, milk growing-season dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, area dependent cost, crop disposal cost, milk disposal cost, condemnation area, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: fraction of cesium deposition on grain fields that is retained on plant surfaces and transferred directly to grain, maximum allowable ground concentrations of Cs-137 and Sr-90 for production of crops, ground concentrations of Cs-134, Cs-137 and I-131 at which the disposal of milk will be initiated due to accidents that occur during the growing season, ground concentrations of Cs-134, I-131 and Sr-90 at which the disposal of crops will be initiated due to accidents that occur during the growing season, rate of depletion of Cs-137 and Sr-90 from the root zone, transfer of Sr-90 from soil to legumes, transfer of Cs-137 from soil to pasture, transfer of cesium from animal feed to meat, and the transfer of cesium, iodine and strontium from animal feed to milk
MELCOR simulation of steam condensation effect on hydrogen behavior in THAI HM-2 experiment
Energy Technology Data Exchange (ETDEWEB)
Lee, Seongnyeon; Lee, Jung-Jae; Cho, Yong-Jin [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Kim, Sung Joong [Hanyang University, Seoul (Korea, Republic of)
2015-10-15
In this study, MELCOR simulation was carried out for THAI HM-2 experiment of OECD. As a results, stratification of hydrogen cloud was reasonably captured in MELCOR simulation. Furthermore, the pressure from simulation results in cases where mass transfer coefficient of MELCOR condensation model was modified was good agreement with the experimental results. Containment Filtered Ventilation System (CFVS) has been introduced as facility to prevent containment failure during severe accident. However, possibility of hydrogen risk has been issued due to inflow of hydrogen, condensation and removal of steam and complicated inner structure in CFVS. Preferentially benchmark work for THAI HM-2 experiment of OECD was decided to validate the methodology before detailed assessment of hydrogen risk in CFVS. The objectives of THAI HM-2 experiment were evaluation of hydrogen behavior, verification of numerical analysis tools and so on. In this paper, therefore, MELCOR simulation was carried out in comparison with the experiment results. Additionally, steam condensation effect was considered for detailed simulation. Hydrogen concentration from MELCOR results was underestimated in comparison to the experimental results.
International Nuclear Information System (INIS)
Helton, J.C.; Johnson, J.D.; Rollstin, J.A.; Shiver, A.W.; Sprung, J.L.
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the chronic exposure pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 75 imprecisely known input variables on the following reactor accident consequences are studied: crop growing season dose, crop long-term dose, water ingestion dose, milk growing season dose, long-term groundshine dose, long-term inhalation dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, total latent cancer fatalities, area-dependent cost, crop disposal cost, milk disposal cost, population-dependent cost, total economic cost, condemnation area, condemnation population, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: dry deposition velocity, transfer of cesium from animal feed to milk, transfer of cesium from animal feed to meat, ground concentration of Cs-134 at which the disposal of milk products will be initiated, transfer of Sr-90 from soil to legumes, maximum allowable ground concentration of Sr-90 for production of crops, fraction of cesium entering surface water that is consumed in drinking water, groundshine shielding factor, scale factor defining resuspension, dose reduction associated with decontamination, and ground concentration of 1-131 at which disposal of crops will be initiated due to accidents that occur during the growing season
MELCOR 1.8.3 assessment: CSE containment spray experiments
International Nuclear Information System (INIS)
Kmetyk, L.N.
1994-12-01
MELCOR is a fully integrated, engineering-level computer code, being developed at Sandia National Laboratories for the USNRC, that models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRS. As part, of an ongoing assessment program, the MELCOR computer code has been used to analyze a series of containment spray tests performed in the Containment Systems Experiment (CSE) vessel to evaluate the performance of aqueous sprays as a means of decontaminating containment atmospheres. Basecase MELCOR results are compared with test data, and a number of sensitivity studies on input modelling parameters and options in both the spray package and the associated aerosol washout and atmosphere decontamination by sprays modelled in the radionuclide package have been done. Time-step and machine-dependency calculations were done to identify whether any numeric effects exist in these CSE assessment analyses. A significant time-step dependency due to an error in the spray package coding was identified and eliminated. A number of other code deficiencies and inconveniences also are noted
Analysis of steam generator tube rupture as a severe accident using MELCOR 1.8.4
International Nuclear Information System (INIS)
Yang Hongrun; Hidaka, Akihide; Sugimoto, Jun
1999-03-01
This report presents the results from the MELCOR 1.8.4 calculations for Steam Generator Tube Rupture (SGTR) with stuck open of all the safety valves in faulted SG as a severe accident. The calculations are based on Surry nuclear power plant. After performed using the once-through primary system model alone by 1.0x10 5 s, the calculations were conducted with both of the once-through and the hot leg countercurrent natural circulation models. The results, including event sequences, processes and progressions of core degradation, radionuclides release from core and reactor cavity, and source terms to the environment are described in detail. It is concluded that the availability of High Pressure Safety Injection (HPSI) can significantly delay the progression of core heat-up and approximately 7% of cesium iodide (CsI) can be released to the environment directly through the stuck open safety valve. Comparisons between the results from the two models are also given in this report. The present analyses also showed that during SGTR accident, the hot leg countercurrent natural circulation flow cannot be established well and therefore it has little effect on the mitigation of the core degradation. (author)
Development of an Input Model to MELCOR 1.8.5 for the Ringhals 3 PWR
International Nuclear Information System (INIS)
Nilsson, Lars
2004-12-01
An input file to the severe accident code MELCOR 1.8.5 has been developed for the Swedish pressurized water reactor Ringhals 3. The aim was to produce a file that can be used for calculations of various postulated severe accident scenarios, although the first application is specifically on cases involving large hydrogen production. The input file is rather detailed with individual modelling of all three cooling loops. The report describes the basis for the Ringhals 3 model and the input preparation step by step and is illustrated by nodalization schemes of the different plant systems. Present version of the report is restricted to the fundamental MELCOR input preparation, and therefore most of the figures of Ringhals 3 measurements and operating parameters are excluded here. These are given in another, complete version of the report, for limited distribution, which includes tables for pertinent data of all components. That version contains appendices with a complete listing of the input files as well as tables of data compiled from a RELAP5 file, that was a major basis for the MELCOR input for the cooling loops. The input was tested in steady-state calculations in order to simulate the initial conditions at current nominal operating conditions in Ringhals 3 for 2775 MW thermal power. The results of the steady-state calculations are presented in the report. Calculations with the MELCOR model will then be carried out of certain accident sequences for comparison with results from earlier MAAP4 calculations. That work will be reported separately
Overview of MELCOR 1.8.4: Modeling advances and assessment
International Nuclear Information System (INIS)
Gauntt, R.O.; Cole, R.K.; Rodriguez, S.B.; Young, M.F.; Gasser, R.D.
1998-01-01
The newly released MELCOR 1.8.4 reactor accident analysis code contains many new modeling features as well as improvements to existing models. New model additions to the MELCOR code include a model for predicting enhanced depletion rates for hygroscopic aerosols and a model for predicting the chemisorption of Cesium to the surfaces of piping. Improvements to existing models include: upgrading the core module (COR) to handle flow redistribution resulting from the formation of core blockages, improving the thermal hydraulics (CVH) coupling with COR to handle flow reversal situations, and upgrading the fission product scrubbing model to incorporate the SPARC90 code. Significant upgrading of the COR package core degradation modeling was also included in the new code release version. New and improved models are described in the following paper. In addition, a number of assessment analyses were recently performed, focusing on demonstrating the new and improved capabilities in the code. Results of assessment calculations demonstrating code performance for aerosol (pool) scrubbing, hygroscopic aerosol behavior, and core degradation and hydrogen production are presented. Finally, ongoing code developments activities beyond MELCOR 1.8.4 are described. These include models for treating iodine behavior in containment sumps, pools, and atmosphere, and plans for implementing reflood models and the attendant effects on accident progression. Further improvements and additions to the core degradation modeling in MELCOR are described, including the implementation of enhanced clad failure models to treat clad ballooning and eutectic interaction with grid spacers, and expansion of the COR package to allow for improved representation of UO 2 -Zr eutectic behavior, improved melt relocation treatment, greater detail in describing aspects of BWR core degradation (fuel channel, bypass, and lower plenum), and more flexibility in modeling other structures in the core such as core plate
The Phebus FP thermal-hydraulic analysis with Melcor
Energy Technology Data Exchange (ETDEWEB)
Akgane, Kikuo; Kiso, Yoshihiro [Nuclear Power Engineering Corporation, Tokyo (Japan); Fukahori, Takanori [Hitachi Engineering Company, Ltd., Hitachi-shi Ibaraki-ken (Japan); Yoshino, Mamoru [Nuclear Engineering Ltd., Tosabori Nishi-ku (Japan)
1995-09-01
The severe accident analysis code MELCOR, version 1.8.2, has been applied for thermal-hydraulic pre-test analysis of the first test of the Phebus FP program (test FPT-0) to study the best test parameters and the applicability of the code. The Phebus FP program is an in-pile test program which has been planned by the French Commissariate a L`Energie Atomique and the Commission of the European Union. The experiments are being conducted by an international collaboration to study the release and transport of fission products (FPs) under conditions assumed to be the most representative of those that would occur in a severe accident. The Phebus FP test apparatus simulates a test bundle of an in-pile section, the circuit including the steam generator U-tubes and the containment. The FPT-0 test was designed to simulate the heat-up and subsequent fuel bundle degradation after a loss of coolant severe accident, using fresh fuel. Two options for fuel degradation models in MELCOR have been applied to fuel degradation behavior. the first model assumes that fuel debris will be formed immediately after the fuel support fails by cladding relocation due to the candling process. The other is the uncollapsed bare fuel pellets option, in which the fuel pellets remain standing in a columnar shape until the fuel reaches its melting point, even if the cladding has been relocated by candling. The thermal-hydraulic behaviors in the circuit and containment of Phebus FP are discussed herein. Flow velocities in the Phebus FP circuit are high in order to produce turbulent flow in a small diameter test pipe. The MELCOR calculation has shown that the length of the hot leg and steam generator are adequate to attain steam temperatures or 700{degrees}C and 150{degrees}C in the respective outlets. The containment atmosphere temperature and humidity derived by once through integral system calculation show that objective test conditions would be satisfied in the Phebus FP experiment.
The Phebus FP thermal-hydraulic analysis with Melcor
International Nuclear Information System (INIS)
Akgane, Kikuo; Kiso, Yoshihiro; Fukahori, Takanori; Yoshino, Mamoru
1995-01-01
The severe accident analysis code MELCOR, version 1.8.2, has been applied for thermal-hydraulic pre-test analysis of the first test of the Phebus FP program (test FPT-0) to study the best test parameters and the applicability of the code. The Phebus FP program is an in-pile test program which has been planned by the French Commissariate a L'Energie Atomique and the Commission of the European Union. The experiments are being conducted by an international collaboration to study the release and transport of fission products (FPs) under conditions assumed to be the most representative of those that would occur in a severe accident. The Phebus FP test apparatus simulates a test bundle of an in-pile section, the circuit including the steam generator U-tubes and the containment. The FPT-0 test was designed to simulate the heat-up and subsequent fuel bundle degradation after a loss of coolant severe accident, using fresh fuel. Two options for fuel degradation models in MELCOR have been applied to fuel degradation behavior. the first model assumes that fuel debris will be formed immediately after the fuel support fails by cladding relocation due to the candling process. The other is the uncollapsed bare fuel pellets option, in which the fuel pellets remain standing in a columnar shape until the fuel reaches its melting point, even if the cladding has been relocated by candling. The thermal-hydraulic behaviors in the circuit and containment of Phebus FP are discussed herein. Flow velocities in the Phebus FP circuit are high in order to produce turbulent flow in a small diameter test pipe. The MELCOR calculation has shown that the length of the hot leg and steam generator are adequate to attain steam temperatures or 700 degrees C and 150 degrees C in the respective outlets. The containment atmosphere temperature and humidity derived by once through integral system calculation show that objective test conditions would be satisfied in the Phebus FP experiment
Identification of gap cooling phenomena from LAVA-4 experiment using MELCOR
International Nuclear Information System (INIS)
Park, Jong-Hwa; Kim, Dong-Ha; Kim, See-Darl; Kim, Sang-Baik; Kim, Hee-Dong
2000-01-01
During the severe accident, whether the hot debris in. lower head will be cool-down or not is the important issue concerning the plant safety. KAERI has launched the 'LAVA' experimental program to examine the existence of initial gap and its effect on the cooling of hot debris. The objective of this study is to identify the gap cooling phenomena from the analysis of simulation results on LAVA-4 experiment using MELCOR1.8.4 code. Three parameters on the debris coolability in MELCOR are the quenching heat transfer coefficient for the interaction between molten Al 2 O 3 and water, the heat transfer coefficient from debris to wall and the diameter of the particulate debris for calculating the available heat transfer area with water. The sensitivity study was performed with these three parameters. However it was believed that there must be a gap between debris and inside wall during the transient. MELCOR1.8.4 does not consider these gap-cooling phenomena. Therefore a conceptual gap-cooling model has been developed and implemented into the lower plenum model in MELCOR to take into account the gap effect in the lower plenum. When the 'gap model' is implemented, the peak temperature of the vessel wall was reduced and its cooling rate was increased. (author)
Simulation of Iodine Behavior by Coupling of a Standalone Model with MELCOR
Energy Technology Data Exchange (ETDEWEB)
Kim, Han Chul; Cho, Song Won [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)
2012-05-15
During a severe accident, a large fraction of iodine in the core can be released into the containment. Iodine is important in terms of its high activity in the early phase after a core-melt accident due to its short half-life isotopes and its serious effect on the public health, especially on the thyroid. Therefore, iodine behavior has been extensively studied through the international research programs. Major research areas are iodine chemistry, surface reactions, mass transfer, modeling of iodine chemistry and its applications to severe accident assessment, and accident management. Advanced tools for modeling these phenomena have been developed and validated by several experiments such as ISTP-EPICUR (International Source Term Program - Experimental Program on Iodine Chemistry under Radiation) and PARIS, and OECD-BIP (Behavior of Iodine Project) in which Korea Institute of Nuclear Safety (KINS) has been participating. As a result, a simple iodine model, RAIM (Radio-Active Iodine chemistry Model) was developed, based on the IMOD methodology in order to deal with organic iodides conveniently. RAIM has been also coupled with MELCOR, replacing the pool chemistry model (PCM). This coupling model, MELCOR-RAIM, will be used for an integrated severe accident assessment that takes into account the organic iodine behavior. This model is described herein, and representative simulation results of the model are presented
International Nuclear Information System (INIS)
Herranz, Luis E.; Garcia, Monica; Otero, Bernadette
2009-01-01
Level-2 Probabilistic Safety Analysis has demonstrated to be a powerful tool to give insights into multiple aspects concerning severe accidents: phenomena with the greatest potential to lead to containment failure, safety systems performance and, even, to identify any additional accident management that could mitigate the consequences of such an even, etc. A major result of level-2 PSA is iodine content in Source Term since it is the main responsible for the radiological impact during the first few days after a hypothetical severe accident. Iodine chemistry is known to considerably affect iodine behavior and although understanding has improved substantially since the early 90's, a thorough understanding is still missing and most PSA studies do not address it when assessing severe accident scenarios. This paper emphasizes the quantitative and qualitative significance of considering iodine chemistry in level-2 PSA estimates. To do so a cold leg break, low pressure severe accident sequence of an actual pressurized water reactor has been analyzed with the MELCOR 1.8.6 YT code. Two sets of calculations, with and without chemistry, have been carried out and compared. The study shows that iodine chemistry could result in an iodine release to environment about twice higher, most of which would consist of around 60% of iodine in gaseous form. From these results it is concluded that exploratory studies on the potential effect of iodine chemistry on source term estimates should be carried out. (author)
Analyses of SBO sequence of VVER1000 reactor using TRACE and MELCOR codes
International Nuclear Information System (INIS)
Mazzini, Guido; Kyncl, Milos; Miglierini, Bruno; Kopecek, Vit
2015-01-01
In response to the Fukushima accident, the European Commission ordered to perform stress tests to all European Nuclear Power Plants (NPPs). Due to shortage of time a number of conclusions in national stress tests reports were based on engineering judgment only. In the Czech Republic, as a follow up, a consortium of Research Organizations and Universities has decided to simulate selected stress tests scenarios, in particular station Black-Out (SBO) and Loss of Ultimate Sink (LoUS), with the aim to verify conclusions made in the national stress report and to analyse time response of respective source term releases. These activities are carried out in the frame of the project 'Prevention, preparedness and mitigation of consequences of Severe Accident (SA) at Czech NPPs in relation to lessons learned from stress tests after Fukushima' financed by the Ministry of Interior. The Research Centre Rez has been working on the preparation of a MELCOR model for VVER1000 NPP starting with a plant systems nodalization. The basic idea of this paper is to benchmark the MELCOR model with the validated TRACE model, first comparing the steady state and continuing in a long term SBO plus another event until the beginning of the severe accident. The presented work focuses mainly on the preliminary comparison of the thermo-hydraulics of the two models created in MELCOR and TRACE codes. After that, preliminary general results of the SA progression showing the hydrogen production and the relocation phenomena will be shortly discussed. This scenario is considered closed after some seconds to the break of the lower head. (author)
International Nuclear Information System (INIS)
Wang, Jun; Corradini, Michael L.; Fu, Wen; Haskin, Troy; Zhang, Yapei; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng
2015-01-01
Highlights: • Core degradation evaluation is an important process in risk analysis. • PHEBUS experiment was simulated using MELCOR. • The results confirm the validity of MELCOR’s simulation of the PHEBUS experiment. • These results are used to analyze the mode and behavior of core degradation. - Abstract: Core degradation evaluation of probability, progression and consequences of a core degradation accident is critical for evaluation of risk as well as its mitigation. However, research and modeling of severe accidents to date are limited, and their accuracy in predicting severe accident consequences is still insufficient. It is therefore important to explore the mechanisms of core degradation and to develop mitigation measures for severe accidents. PHEBUS FPT1 is a typical and classic core degradation experiment. MELCOR is a world famous severe accident analysis code developed by Sandia National Lab that has seen wide application, a broad user base, and a number of supporting experiments. The PHEBUS experiment was simulated using MELCOR in this paper. Experimental data on, thermal power and steam mass flow rates are used to determine average pressure, energy distribution, molten mass, temperature of the fuel, and hydrogen generation. Data from the PHEBUS experiment and Cho’s calculations are used to compare the average pressure, several fuel temperatures and the hydrogen generation rate. The results confirm the validity of MELCOR’s simulation of the PHEBUS experiment. The temperature distribution of the core is provided. These results are used to determine the mode and behavior of core degradation with the intent of building a foundation for further research
MELCOR 1.8.2 calculations of selected sequences for the ABWR
International Nuclear Information System (INIS)
Kmetyk, L.N.
1994-07-01
This report summarizes the results from MELCOR calculations of severe accident sequences in the ABWR and presents comparisons with MAAP calculations for the same sequences. MELCOR was run for two low-pressure and three high-pressure sequences to identify the materials which enter containment and are available for release to the environment (source terms), to study the potential effects of core-concrete interaction, and to obtain event timings during each sequence; the source terms include fission products and other materials such as those generated by core-concrete interactions. Sensitivity studies were done on the impact of assuming limestone rather than basaltic concrete and on the effect of quenching core debris in the cavity compared to having hot, unquenched debris present
International Nuclear Information System (INIS)
Helton, J.C; Johnson, J.D; Rollstin, J.A; Shiver, A.W; Sprung, J.L
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis are used in an investigation with the MACCS model of the chronic exposure pathways associated with a severe accident at a nuclear power station. The primary purpose of this study is to provide guidance on the variables to be considered in future review work to reduce the uncertainty in the important variables used in the calculation of reactor accident consequences. The effects of 75 imprecisely known input variables on the following reactor accident consequences are studied: crop growing-season dose, crop long-term dose, water ingestion dose, milk growing-season dose, long-term groundshine dose, long-term inhalation dose, total food pathways dose, total ingestion pathways dose, total long-term pathways dose, total latent cancer fatalities, area-dependent cost, crop disposal cost, milk disposal cost, population-dependent cost, total economic cost, condemnation area, condemnation population, crop disposal area and milk disposal area. When the predicted variables are considered collectively, the following input variables were found to be the dominant contributors to uncertainty: dry deposition velocity, transfer of cesium from animal feed to milk, transfer of cesium from animal feed to meet, ground concentration of Cs-134 at which the disposal of milk products will be initiated, transfer of Sr-90 from soil to legumes, maximum allowable ground concentration of Sr-90 for production of crops, fraction of cesium entering surface water that is consumed in drinking water, groundshine shielding factor, scale factor defining resuspension, dose reduction associated with decontamination, and ground concentration of I-131 at which disposal of crops will be initiated due to accidents that occur during the growing season. Reducing the uncertainty in the preceding variables was found to substantially reduce the uncertainty in the
International Nuclear Information System (INIS)
Lombardi, D.A.; Brock, W.R.
1998-01-01
Building 9204-2E is used for assembly, disassembly, and storage of weapons components, and quality operations. The building, built in 1971, is a three story structure approximately 101 m long, 51 m wide, and 21 m high located in the western exclusion area of the Y-12 Plant, Oak Ridge, Tennessee. For these activities, several types of hazardous and radioactive materials are used and stored in Building 9204-2E. During a fire, criticality event, or other accident, the potential exists for the release of uranium and other hazardous materials from the building to the atmosphere. A Safety Analysis Report (SAR) is being prepared for Building 9204-2E, in which the consequences of such releases to on-site workers and the off-site public are being analyzed. Consequence estimates from accidental airborne releases are generally calculated using computer models that simulate dispersion and transport of the plume as it travels downwind. For the Building 9204-2E SAR, two candidate atmospheric dispersion candidate models have bene identified for use: (1) the Heavy Gas System-Uranium Hexafluoride (HGSYSTEM/UF 6 ) Model Suite, and (2) the MELCOR Accident Consequence Code System-2 (MACCS2). The purpose of this paper is to provide a general description of the two model suites and compared model results for generic release cases, representative of those that will be analyzed in the Building 9204-2E SAR. Recommendations for use of the model suites in the SAR are also discussed
Energy Technology Data Exchange (ETDEWEB)
Gauntt, Randall O.; Bixler, Nathan E.; Wagner, Kenneth Charles.
2014-03-01
A methodology for using the MELCOR code with the Latin Hypercube Sampling method was developed to estimate uncertainty in various predicted quantities such as hydrogen generation or release of fission products under severe accident conditions. In this case, the emphasis was on estimating the range of hydrogen sources in station blackout conditions in the Sequoyah Ice Condenser plant, taking into account uncertainties in the modeled physics known to affect hydrogen generation. The method uses user-specified likelihood distributions for uncertain model parameters, which may include uncertainties of a stochastic nature, to produce a collection of code calculations, or realizations, characterizing the range of possible outcomes. Forty MELCOR code realizations of Sequoyah were conducted that included 10 uncertain parameters, producing a range of in-vessel hydrogen quantities. The range of total hydrogen produced was approximately 583kg 131kg. Sensitivity analyses revealed expected trends with respected to the parameters of greatest importance, however, considerable scatter in results when plotted against any of the uncertain parameters was observed, with no parameter manifesting dominant effects on hydrogen generation. It is concluded that, with respect to the physics parameters investigated, in order to further reduce predicted hydrogen uncertainty, it would be necessary to reduce all physics parameter uncertainties similarly, bearing in mind that some parameters are inherently uncertain within a range. It is suspected that some residual uncertainty associated with modeling complex, coupled and synergistic phenomena, is an inherent aspect of complex systems and cannot be reduced to point value estimates. The probabilistic analyses such as the one demonstrated in this work are important to properly characterize response of complex systems such as severe accident progression in nuclear power plants.
Safety analysis results for cryostat ingress accidents in ITER
International Nuclear Information System (INIS)
Merrill, B.J.; Cadwallader, L.C.; Petti, D.A.
1996-01-01
Accidents involving the ingress of air or water into the cryostat of the International Thermonuclear Experimental Reactor (ITER) tokamak design have been analyzed with a modified version of the MELCOR code for the ITER Non-site Specific Safety Report (NSSR-1). The air ingress accident is the result of a postulated breach of the cryostat boundary into an adjoining room. MELCOR results for this accident demonstrate that the condensed air mass and increased heat loads are not a magnet safety concern, but that the partial vacuum in the adjoining room must be accommodated in the building design. The water ingress accident is the result of a postulated magnet arc that results in melting of a Primary Heat Transport System (PHTS) coolant pipe, discharging PHTS water and PHTS water activated corrosion products and HTO into the cryostat. MELCOR results for this accident demonstrate that the condensed water mass and increased heat loads are not a magnet safety concern, that the cryostat pressure remains below design limits, and that the corrosion product and HTO releases are well within the ITER release limits
International Nuclear Information System (INIS)
Helton, J.C.; Johnson, J.D.; McKay, M.D.; Shiver, A.W.; Sprung, J.L.
1995-01-01
Uncertainty and sensitivity analysis techniques based on Latin hypercube sampling, partial correlation analysis and stepwise regression analysis were used in an investigation with the MACCS model of the early health effects associated with a severe accident at a nuclear power station. The following results were obtained in tests to check the robustness of the analysis techniques: two independent Latin hypercube samples produced similar uncertainty and sensitivity analysis results; setting important variables to best-estimate values produced substantial reductions in uncertainty, while setting the less important variables to best-estimate values had little effect on uncertainty; similar sensitivity analysis results were obtained when the original uniform and loguniform distributions assigned to the 34 imprecisely known input variables were changed to left-triangular distributions and then to right-triangular distributions; and analyses with rank-transformed and logarithmically-transformed data produced similar results and substantially outperformed analyses with raw (i.e., untransformed) data
Reactor Core Coolability Analysis during Hypothesized Severe Accidents of OPR1000
International Nuclear Information System (INIS)
Lee, Yongjae; Seo, Seungwon; Kim, Sung Joong; Ha, Kwang Soon; Kim, Hwan-Yeol
2014-01-01
Assessment of the safety features over the hypothesized severe accidents may be performed experimentally or numerically. Due to the considerable time and expenditures, experimental assessment is implemented only to the limited cases. Therefore numerical assessment has played a major role in revisiting severe accident analysis of the existing or newly designed power plants. Computer codes for the numerical analysis of severe accidents are categorized as the fast running integral code and detailed code. Fast running integral codes are characterized by a well-balanced combination of detailed and simplified models for the simulation of the relevant phenomena within an NPP in the case of a severe accident. MAAP, MELCOR and ASTEC belong to the examples of fast running integral codes. Detailed code is to model as far as possible all relevant phenomena in detail by mechanistic models. The examples of detailed code is SCDAP/RELAP5. Using the MELCOR, Carbajo. investigated sensitivity studies of Station Black Out (SBO) using the MELCOR for Peach Bottom BWR. Park et al. conduct regulatory research of the PWR severe accident. Ahn et al. research sensitivity analysis of the severe accident for APR1400 with MELCOR 1.8.4. Lee et al. investigated RCS depressurization strategy and developed a core coolability map for independent scenarios of Small Break Loss-of-Coolant Accident (SBLOCA), SBO, and Total Loss of Feed Water (TLOFW). In this study, three initiating cases were selected, which are SBLOCA without SI, SBO, and TLOFW. The initiating cases exhibit the highest probability of transitioning into core damage according to PSA 1 of OPR 1000. The objective of this study is to investigate the reactor core coolability during hypothesized severe accidents of OPR1000. As a representative indicator, we have employed Jakob number and developed JaCET and JaMCT using the MELCOR simulation. Although the RCS pressures for the respective accident scenarios were different, the JaMCT and Ja
PACTEL ISP-33. MELCOR assessment
International Nuclear Information System (INIS)
Siccama, N.B.
1995-09-01
The OECD/CSNI International Standard Problem (ISP-33) experiment was a natural-circulation experiment with a stepwide reduced primary coolant inventory in the PACTEL facility. The MELCOR code has been used to simulate this experiment. The main goal of these post-test calculations was to assess MELCOR on one- and two-phase natural-circulation phenomena which occur in Eastern European VVER plants in case of LOCA conditions. A base case and several senstivity calculations have been performed. In addition, the MELCOR results have been compared to results obtained by the RELAP5 code. Different natural-circulation modes have been identified during the experiment and simulated with MELCOR in the analyses of the ISP-33 experiment. These are successively: The single-phase liquid flow, the transient two-phase flow, the steady two-phase flow, and the boiler-condenser heat removal. These regimes, except the transient two-phase flow, are calculated in good agreement with the experiment. Special attention has been paid to the modeling of the two-phase flow in the hot legs of the PACTEL facility. Sensitivity calculation have shown that the results to a large extent are influenced by the nodalization of the hot legs and the opening heights of the hot-leg flow paths. Other senstivity calculations have shown that the time step and the core model do not influence the results, and accurate values for form loss coefficients and properties of the insulation are not necessary. The integrated MELCOR code is not inferior to the mechanistic RELAP5 code for the PACTEL ISP-33 post-test calculations. Some phenomena are modeled even better by MELCOR, because of the ability fit MELCOR parameters. (orig.)
A source term and risk calculations using level 2+PSA methodology
International Nuclear Information System (INIS)
Park, S. I.; Jea, M. S.; Jeon, K. D.
2002-01-01
The scope of Level 2+ PSA includes the assessment of dose risk which is associated with the exposures of the radioactive nuclides escaping from nuclear power plants during severe accidents. The establishment of data base for the exposure dose in Korea nuclear power plants may contribute to preparing the accident management programs and periodic safety reviews. In this study the ORIGEN, MELCOR and MACCS code were employed to produce a integrated framework to assess the radiation source term risk. The framework was applied to a reference plant. Using IPE results, the dose rate for the reference plant was calculated quantitatively
International Nuclear Information System (INIS)
Carbajo, J.J.
1995-06-01
A fully qualified, best-estimate MELCOR deck has been prepared for the Grand Gulf Nuclear Station and has been run using MELCOR 1.8.3 (1.8 PN) for a low-pressure, short-term, station blackout severe accident. The same severe accident sequence has been run with the same MELCOR version for the same plant using the deck prepared during the NUREG-1150 study. A third run was also completed with the best-estimate deck but without the Lower Plenum Debris Bed (BH) Package to model the lower plenum. The results from the three runs have been compared, and substantial differences have been found. The timing of important events is shorter, and the calculated source terms are in most cases larger for the NUREG-1150 deck results. However, some of the source terms calculated by the NUREG-1150 deck are not conservative when compared to the best-estimate deck results. These results identified some deficiencies in the NUREG-1150 model of the Grand Gulf Nuclear Station. Injection recovery sequences have also been simulated by injecting water into the vessel after core relocation started. This marks the first use of the new BH Package of MELCOR to investigate the effects of water addition to a lower plenum debris bed. The calculated results indicate that vessel failure can be prevented by injecting water at a sufficiently early stage. No pressure spikes in the vessel were predicted during the water injection. The MELCOR code has proven to be a useful tool for severe accident management strategies
MACCS version 1.5.11.1: A maintenance release of the code
International Nuclear Information System (INIS)
Chanin, D.; Foster, J.; Rollstin, J.; Miller, L.
1993-10-01
A new version of the MACCS code (version 1.5.11.1) has been developed by Sandia National Laboratories under sponsorship of the US Nuclear Regulatory Commission. MACCS was developed to support evaluations of the off-site consequences from hypothetical severe accidents at commercial power plants. MACCS is the only current public domain code in the US that embodies all of the following modeling capabilities: (1) weather sampling using a year of recorded weather data; (2) mitigative actions such as evacuation, sheltering, relocation, decontamination, and interdiction; (3) economic costs of mitigative actions; (4) cloudshine, groundshine, and inhalation pathways as well as food and water ingestion; (5) calculation of both individual and societal doses to various organs; and (6) calculation of both acute (nonstochastic) and latent (stochastic) health effects and risks of health effects. All of the consequence measures may be fun generated in the form of a complementary cumulative distribution function (CCDF). The current version implements a revised cancer model consistent with recent reports such as BEIR V and ICRP 60. In addition, a number of error corrections and portability enhancements have been implemented. This report describes only the changes made in creating the new version. Users of the code will need to obtain the code's original documentation, NUREG/CR-4691
A Web Server for MACCS Magnetometer Data
Engebretson, Mark J.
1998-01-01
NASA Grant NAG5-3719 was provided to Augsburg College to support the development of a web server for the Magnetometer Array for Cusp and Cleft Studies (MACCS), a two-dimensional array of fluxgate magnetometers located at cusp latitudes in Arctic Canada. MACCS was developed as part of the National Science Foundation's GEM (Geospace Environment Modeling) Program, which was designed in part to complement NASA's Global Geospace Science programs during the decade of the 1990s. This report describes the successful use of these grant funds to support a working web page that provides both daily plots and file access to any user accessing the worldwide web. The MACCS home page can be accessed at http://space.augsburg.edu/space/MaccsHome.html.
Energy Technology Data Exchange (ETDEWEB)
Gauntt, Randall O.; Goldmann, Andrew; Kalinich, Donald A.; Powers, Dana A.
2016-12-01
In this study, risk-significant pressurized-water reactor severe accident sequences are examined using MELCOR 1.8.5 to explore the range of fission product releases to the reactor containment building. Advances in the understanding of fission product release and transport behavior and severe accident progression are used to render best estimate analyses of selected accident sequences. Particular emphasis is placed on estimating the effects of high fuel burnup in contrast with low burnup on fission product releases to the containment. Supporting this emphasis, recent data available on fission product release from high-burnup (HBU) fuel from the French VERCOR project are used in this study. The results of these analyses are treated as samples from a population of accident sequences in order to employ approximate order statistics characterization of the results. These trends and tendencies are then compared to the NUREG-1465 alternative source term prescription used today for regulatory applications. In general, greater differences are observed between the state-of-the-art calculations for either HBU or low-burnup (LBU) fuel and the NUREG-1465 containment release fractions than exist between HBU and LBU release fractions. Current analyses suggest that retention of fission products within the vessel and the reactor coolant system (RCS) are greater than contemplated in the NUREG-1465 prescription, and that, overall, release fractions to the containment are therefore lower across the board in the present analyses than suggested in NUREG-1465. The decreased volatility of Cs 2 MoO 4 compared to CsI or CsOH increases the predicted RCS retention of cesium, and as a result, cesium and iodine do not follow identical behaviors with respect to distribution among vessel, RCS, and containment. With respect to the regulatory alternative source term, greater differences are observed between the NUREG-1465 prescription and both HBU and LBU predictions than exist between HBU and LBU
Fusion safety codes International modeling with MELCOR and ATHENA- INTRA
Marshall, T; Topilski, L; Merrill, B
2002-01-01
For a number of years, the world fusion safety community has been involved in benchmarking their safety analyses codes against experiment data to support regulatory approval of a next step fusion device. This paper discusses the benchmarking of two prominent fusion safety thermal-hydraulic computer codes. The MELCOR code was developed in the US for fission severe accident safety analyses and has been modified for fusion safety analyses. The ATHENA code is a multifluid version of the US-developed RELAP5 code that is also widely used for fusion safety analyses. The ENEA Fusion Division uses ATHENA in conjunction with the INTRA code for its safety analyses. The INTRA code was developed in Germany and predicts containment building pressures, temperatures and fluid flow. ENEA employs the French-developed ISAS system to couple ATHENA and INTRA. This paper provides a brief introduction of the MELCOR and ATHENA-INTRA codes and presents their modeling results for the following breaches of a water cooling line into the...
Energy Technology Data Exchange (ETDEWEB)
Young, Michael F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2015-07-01
Aerosol particles that deposit on surfaces may be subsequently resuspended by air flowing over the surface. A review of models for this liftoff process is presented and compared to available data. Based on this review, a model that agrees with existing data and is readily computed is presented for incorporation into a system level code such as MELCOR. Liftoff Model for MELCOR July 2015 4 This page is intentionally blank
PWR hot leg natural circulation modeling with MELCOR code
Energy Technology Data Exchange (ETDEWEB)
Park, Jae Hong; Lee, Jong In [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)
1998-12-31
Previous MELCOR and SCDAP/RELAP5 nodalizations for simulating the counter-current, natural circulation behavior of vapor flow within the RCS hot legs and SG U-tubes when core damage progress can not be applied to the steady state and water-filled conditions during the initial period of accident progression because of the artificially high loss coefficients in the hot legs and SG U-tubes which were chosen from results of COMMIX calculation and the Westinghouse natural circulation experiments in a 1/7-scale facility for simulating steam natural circulation behavior in the vessel and circulation modeling which can be used both for the liquid flow condition at steady state and for the vapor flow condition at the later period of in-vessel core damage. For this, the drag forces resulting from the momentum exchange effects between the two vapor streams in the hot leg was modeled as a pressure drop by pump model. This hot leg natural circulation modeling of MELCOR was able to reproduce similar mass flow rates with those predicted by previous models. 6 refs., 2 figs. (Author)
PWR hot leg natural circulation modeling with MELCOR code
Energy Technology Data Exchange (ETDEWEB)
Park, Jae Hong; Lee, Jong In [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of)
1997-12-31
Previous MELCOR and SCDAP/RELAP5 nodalizations for simulating the counter-current, natural circulation behavior of vapor flow within the RCS hot legs and SG U-tubes when core damage progress can not be applied to the steady state and water-filled conditions during the initial period of accident progression because of the artificially high loss coefficients in the hot legs and SG U-tubes which were chosen from results of COMMIX calculation and the Westinghouse natural circulation experiments in a 1/7-scale facility for simulating steam natural circulation behavior in the vessel and circulation modeling which can be used both for the liquid flow condition at steady state and for the vapor flow condition at the later period of in-vessel core damage. For this, the drag forces resulting from the momentum exchange effects between the two vapor streams in the hot leg was modeled as a pressure drop by pump model. This hot leg natural circulation modeling of MELCOR was able to reproduce similar mass flow rates with those predicted by previous models. 6 refs., 2 figs. (Author)
MELCOR/VISOR PWR desktop simulator
International Nuclear Information System (INIS)
With, Anka de; Wakker, Pieter
2010-01-01
Increasingly, there is a need for a learning support and training tool for nuclear engineers, utilities and students in order to broaden their understanding of advanced nuclear plant characteristics, dynamics, transients and safety features. Nuclear system analysis codes like ASTEC, RELAP5, RETRAN and MELCOR provide calculation results of and visualization tools can be used to graphically represent these results. However, for an efficient education and training a more interactive tool such as a simulator is needed. The simulator connects the graphical tool with the calculation tool in an interactive manner. A small number of desktop simulators exist [1-3]. The existing simulators are capable of representing different types of power plants and various accident conditions. However, they were found to be too general to be used as a reliable plant-specific accident analysis or training tool. A desktop simulator of the Pressurized Water Reactor (PWR) has been created under contract of the Dutch nuclear regulatory body (KFD). The desktop simulator is a software package that provides a close to real simulation of the Dutch nuclear power plant Borssele (KCB) and is used for training of the accident response. The simulator includes the majority of the power plant systems, necessary for the successful simulation of the KCB plant during normal operation, malfunctions and accident situations, and it has been successfully validated against the results of the safety evaluations from the KCB safety report. (orig.)
MELCOR ex-vessel LOCA simulations for ITER+
International Nuclear Information System (INIS)
Gaeta, M.J.; Merrill, B.J.; Bartels, H.W.
1995-01-01
Ex-vessel Loss-of-Coolant-Accident (LOCA) simulations for the International Thermonuclear Experimental Reactor (ITER) were performed using the MELCOR code. The main goals of this work were to estimate the ultimate pressurization of the heat transport system (HTS) vault in order to gauge the potential for stack releases and to estimate the total amount of hydrogen generated during a design basis ex-vessel LOCA. Simulation results indicated that the amount of hydrogen produced in each transient was below the flammability limit for the plasma chamber. In addition, only moderate pressurization of the HTS vault indicated a very small potential for releases through the stack
Energy Technology Data Exchange (ETDEWEB)
Saghafi, Mahdi [Department of Energy Engineering, Sharif University of Technology, Azadi Avenue, Tehran (Iran, Islamic Republic of); Ghofrani, Mohammad Bagher, E-mail: ghofrani@sharif.edu [Department of Energy Engineering, Sharif University of Technology, Azadi Avenue, Tehran (Iran, Islamic Republic of); D’Auria, Francesco [San Piero a Grado Nuclear Research Group (GRNSPG), University of Pisa, Via Livornese 1291, San Piero a Grado, Pisa (Italy)
2016-07-15
Highlights: • A thermal-hydraulic nodalization for PSB-VVER test facility has been developed. • Station blackout accident is modeled with the developed nodalization in MELCOR code. • The developed nodalization is qualified at both steady state and transient levels. • MELCOR predictions are qualitatively and quantitatively in acceptable range. • Fast Fourier Transform Base Method is used to quantify accuracy of code predictions. - Abstract: This paper deals with the development of a qualified thermal-hydraulic nodalization for modeling Station Black-Out (SBO) accident in PSB-VVER Integral Test Facility (ITF). This study has been performed in the framework of a research project, aiming to develop an appropriate accident management support tool for Bushehr nuclear power plant. In this regard, a nodalization has been developed for thermal-hydraulic modeling of the PSB-VVER ITF by MELCOR integrated code. The nodalization is qualitatively and quantitatively qualified at both steady-state and transient levels. The accuracy of the MELCOR predictions is quantified in the transient level using the Fast Fourier Transform Base Method (FFTBM). FFTBM provides an integral representation for quantification of the code accuracy in the frequency domain. It was observed that MELCOR predictions are qualitatively and quantitatively in the acceptable range. In addition, the influence of different nodalizations on MELCOR predictions was evaluated and quantified using FFTBM by developing 8 sensitivity cases with different numbers of control volumes and heat structures in the core region and steam generator U-tubes. The most appropriate case, which provided results with minimum deviations from the experimental data, was then considered as the qualified nodalization for analysis of SBO accident in the PSB-VVER ITF. This qualified nodalization can be used for modeling of VVER-1000 nuclear power plants when performing SBO accident analysis by MELCOR code.
Ex-Vessel Core Melt Modeling Comparison between MELTSPREAD-CORQUENCH and MELCOR 2.1
Energy Technology Data Exchange (ETDEWEB)
Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Farmer, Mitchell [Argonne National Lab. (ANL), Argonne, IL (United States); Francis, Matthew W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
2014-03-01
System-level code analyses by both United States and international researchers predict major core melting, bottom head failure, and corium-concrete interaction for Fukushima Daiichi Unit 1 (1F1). Although system codes such as MELCOR and MAAP are capable of capturing a wide range of accident phenomena, they currently do not contain detailed models for evaluating some ex-vessel core melt behavior. However, specialized codes containing more detailed modeling are available for melt spreading such as MELTSPREAD as well as long-term molten corium-concrete interaction (MCCI) and debris coolability such as CORQUENCH. In a preceding study, Enhanced Ex-Vessel Analysis for Fukushima Daiichi Unit 1: Melt Spreading and Core-Concrete Interaction Analyses with MELTSPREAD and CORQUENCH, the MELTSPREAD-CORQUENCH codes predicted the 1F1 core melt readily cooled in contrast to predictions by MELCOR. The user community has taken notice and is in the process of updating their systems codes; specifically MAAP and MELCOR, to improve and reduce conservatism in their ex-vessel core melt models. This report investigates why the MELCOR v2.1 code, compared to the MELTSPREAD and CORQUENCH 3.03 codes, yield differing predictions of ex-vessel melt progression. To accomplish this, the differences in the treatment of the ex-vessel melt with respect to melt spreading and long-term coolability are examined. The differences in modeling approaches are summarized, and a comparison of example code predictions is provided.
A restructuring of the MELCOR fission product packages for the MIDAS computer code
International Nuclear Information System (INIS)
Park, S.H.; Kim, K.R.; Kim, D.H.
2004-01-01
The RN1/RN2 packages, which are the fission product-related packages in MELCOR, have been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and a modernized data structure. To do this, the data transferring methods of the current MELCOR code are modified and adopted into the RN1/RN2 package. The data structure of the current MELCOR code using FORTRAN77 has a difficulty in grasping the meaning of the variables as well as waste of memory. New features of FORTRAN90 make it possible to allocate the storage dynamically and to user-defined data type, which leads to an efficient memory treatment and an easy understanding of the code. Restructuring of the RN1/RN2 package addressed in this paper includes a module development, subroutine modification, and the treatment of MELGEN, which generates the data file, as well as MELCOR, which is processing the calculation. The verification has been done by comparing the results of the modified code with those of the existing code. As the trends are similar to each other, it implies that the same approach could be extended to the entire code package. It is expected that the code restructuring will accelerate the code domestication thanks to a direct understanding of each variable and an easy implementation of the modified or newly developed models. (author)
A guidance on MELCOR input preparation : An input deck for Ul-Chin 3 and 4 Nuclear Power Plant
Energy Technology Data Exchange (ETDEWEB)
Cho, Song Won
1997-02-01
The objective of this study is to enhance the capability of assessing the severe accident sequence analyses and the containment behavior using MELCOR computer code and to provide the guideline of its efficient use. This report shows the method of the input deck preparation as well as the assessment strategy for the MELCOR code. MELCOR code is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The code is being developed at Sandia National Laboratories for the U.S. NRC as a second generation plant risk assessment tool and the successor to the source term code package. The accident sequence of the reference input deck prepared in this study for Ulchin unit 3 and 4 nuclear power plants, is the total loss of feedwater (TLOFW) without any success of safety systems, which is similar to station blackout (TLMB). It is very useful to simulate a well-known sequence through the best estimated code or experiment, because the results of the simulation before core melt can be compared with the FSAR, but no data is available after core melt. The precalculation for the TLOFW using the reference input deck is performed successfully as expected. The other sequences will be carried out with minor changes in the reference input. This input deck will be improved continually by the adding of the safety systems not included in this input deck, and also through the sensitivity and uncertainty analyses. (author). 19 refs., 10 tabs., 55 figs.
A guidance on MELCOR input preparation : An input deck for Ul-Chin 3 and 4 Nuclear Power Plant
International Nuclear Information System (INIS)
Cho, Song Won.
1997-02-01
The objective of this study is to enhance the capability of assessing the severe accident sequence analyses and the containment behavior using MELCOR computer code and to provide the guideline of its efficient use. This report shows the method of the input deck preparation as well as the assessment strategy for the MELCOR code. MELCOR code is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. The code is being developed at Sandia National Laboratories for the U.S. NRC as a second generation plant risk assessment tool and the successor to the source term code package. The accident sequence of the reference input deck prepared in this study for Ulchin unit 3 and 4 nuclear power plants, is the total loss of feedwater (TLOFW) without any success of safety systems, which is similar to station blackout (TLMB). It is very useful to simulate a well-known sequence through the best estimated code or experiment, because the results of the simulation before core melt can be compared with the FSAR, but no data is available after core melt. The precalculation for the TLOFW using the reference input deck is performed successfully as expected. The other sequences will be carried out with minor changes in the reference input. This input deck will be improved continually by the adding of the safety systems not included in this input deck, and also through the sensitivity and uncertainty analyses. (author). 19 refs., 10 tabs., 55 figs
The development of severe accident analysis technology
Energy Technology Data Exchange (ETDEWEB)
Kim, Heuy Dong; Cho, Sung Won; Kim, Sang Baek; Park, Jong Hwa; Lee, Kyu Jung; Park, Lae Joon; Hu, Hoh; Hong, Sung Wan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1993-07-01
The objective of the development of severe accident analysis technology is to understand the severe accident phenomena such as core melt progression and to provide a reliable analytical tool to assess severe accidents in a nuclear power plant. Furthermore, establishment of the accident management strategies for the prevention/mitigation of severe accidents is also the purpose of this research. The study may be categorized into three areas. For the first area, two specific issues were reviewed to identify the further research direction, that is the natural circulation in the reactor coolant system and the fuel-coolant interaction as an in-vessel and an ex-vessel phenomenological study. For the second area, the MELCOR and the CONTAIN codes have been upgraded, and a validation calculation of the MELCOR has been performed for the PHEBUS-B9+ experiment. Finally, the experimental program has been established for the in-vessel and the ex-vessel severe accident phenomena with the in-pile test loop in KMRR and the integral containment test facilities, respectively. (Author).
Development of an Input Model to MELCOR 1.8.5 for the Oskarshamn 3 BWR
Energy Technology Data Exchange (ETDEWEB)
Nilsson, Lars [Lentek, Nykoeping (Sweden)
2006-05-15
An input model has been prepared to the code MELCOR 1.8.5 for the Swedish Oskarshamn 3 Boiling Water Reactor (O3). This report describes the modelling work and the various files which comprise the input deck. Input data are mainly based on original drawings and system descriptions made available by courtesy of OKG AB. Comparison and check of some primary system data were made against an O3 input file to the SCDAP/RELAP5 code that was used in the SARA project. Useful information was also obtained from the FSAR (Final Safety Analysis Report) for O3 and the SKI report '2003 Stoerningshandboken BWR'. The input models the O3 reactor at its current state with the operating power of 3300 MW{sub th}. One aim with this work is that the MELCOR input could also be used for power upgrading studies. All fuel assemblies are thus assumed to consist of the new Westinghouse-Atom's SVEA-96 Optima2 fuel. MELCOR is a severe accident code developed by Sandia National Laboratory under contract from the U.S. Nuclear Regulatory Commission (NRC). MELCOR is a successor to STCP (Source Term Code Package) and has thus a long evolutionary history. The input described here is adapted to the latest version 1.8.5 available when the work began. It was released the year 2000, but a new version 1.8.6 was distributed recently. Conversion to the new version is recommended. (During the writing of this report still another code version, MELCOR 2.0, has been announced to be released within short.) In version 1.8.5 there is an option to describe the accident progression in the lower plenum and the melt-through of the reactor vessel bottom in more detail by use of the Bottom Head (BH) package developed by Oak Ridge National Laboratory especially for BWRs. This is in addition to the ordinary MELCOR COR package. Since problems arose running with the BH input two versions of the O3 input deck were produced, a NONBH and a BH deck. The BH package is no longer a separate package in the new 1
International Nuclear Information System (INIS)
Phung, V.A.; Galushin, S.; Raub, S.; Goronovski, A.; Villanueva, W.; Koeoep, K; Grishchenko, D.; Kudinov, P.
2015-01-01
Severe accident management strategy in Nordic boiling water reactors (BWRs) relies on ex-vessel core debris coolability. The mode of corium melt release from the vessel determines conditions for ex-vessel accident progression and threats to containment integrity, e.g., formation of a non-coolable debris bed and possibility of energetic steam explosion. In-vessel core degradation and relocation is an important stage which determines characteristics of corium debris in the vessel lower plenum, such as mass, composition, thermal properties, timing of relocation, and decay heat. These properties affect debris reheating and remelting, melt interactions with the vessel structures, and possibly vessel failure and melt ejection mode. Core degradation and relocation is contingent upon the accident scenario parameters such as recovery time and capacity of safety systems. The goal of this work is to obtain a better understanding of the impact of the accident scenarios and timing of the events on core relocation phenomena and resulting properties of the debris bed in the vessel lower plenum of Nordic BWRs. In this study, severe accidents in a Nordic BWR reference plant are initiated by a station black out event, which is the main contributor to core damage frequency of the reactor. The work focuses on identifying ranges of debris bed characteristics in the lower plenum as functions of the accident scenario with different recovery timing and capacity of safety systems. The severe accident analysis code MELCOR coupled with GA-IDPSA is used in this work. GA-IDPSA is a Genetic Algorithm-based Integrated Deterministic Probabilistic Safety Analysis tool, which has been developed to search uncertain input parameter space. The search is guided by different target functions. Scenario grouping and clustering approach is applied in order to estimate the ranges of debris characteristics and identify scenario regions of core relocation that can lead to significantly different debris bed
Energy Technology Data Exchange (ETDEWEB)
Lee, Seung Min; Sabundjian, Gaianê, E-mail: smlee@ipen.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)
2017-11-01
The aim of this work was to simulate a severe accident at a typical PWR caused by break in Emergency Core Cooling System (ECCS) line of a hot leg using the MELCOR code. The nodalization of this typical PWR was elaborated by the Global Research for Safety (GRS) and provided to the CNEN for analysis of the severe accidents at the Angra 2, which is similar to that PWR. Although both of them are not identical the results obtained for that typical PWR may be valuable because of the lack of officially published calculation for Angra 2. Relevant parameters such as pressure, temperature and water level in various control volumes after the break in the hot leg were calculated as well as degree of core degradation and hydrogen concentration in containment. The result obtained in this work could be considered satisfactory in the sense that the physical phenomena reproduced by the simulation were in general very reasonable, and most of the events occurred within acceptable time intervals. However, the uncertainty analysis was not carried out in this work. Furthermore, this scenario could be used as a base for the study of the effectiveness of some preventive or/and mitigating measures of Severe Accident Management (SAMG) by adding associated conditions for each measure in its input. (author)
International Nuclear Information System (INIS)
Lee, Seung Min; Sabundjian, Gaianê
2017-01-01
The aim of this work was to simulate a severe accident at a typical PWR caused by break in Emergency Core Cooling System (ECCS) line of a hot leg using the MELCOR code. The nodalization of this typical PWR was elaborated by the Global Research for Safety (GRS) and provided to the CNEN for analysis of the severe accidents at the Angra 2, which is similar to that PWR. Although both of them are not identical the results obtained for that typical PWR may be valuable because of the lack of officially published calculation for Angra 2. Relevant parameters such as pressure, temperature and water level in various control volumes after the break in the hot leg were calculated as well as degree of core degradation and hydrogen concentration in containment. The result obtained in this work could be considered satisfactory in the sense that the physical phenomena reproduced by the simulation were in general very reasonable, and most of the events occurred within acceptable time intervals. However, the uncertainty analysis was not carried out in this work. Furthermore, this scenario could be used as a base for the study of the effectiveness of some preventive or/and mitigating measures of Severe Accident Management (SAMG) by adding associated conditions for each measure in its input. (author)
International Nuclear Information System (INIS)
Lindholm, I.; Pekkarinen, E.; Sjoevall, H.
1995-01-01
Selected core reflooding situations were investigated in the case of a Finnish boiling water reactor with three severe accident analysis computer codes (MAAP, MELCOR, and SCDAP/RELAP5). The unmitigated base case accident scenario was a 10% steam-line break without water makeup to the reactor pressure vessel initially. The pumping of water to the core was started with the auxiliary feed water system when the maximum fuel cladding temperature reached 1,500 K. The auxiliary feedwater system pumps water (temperature 303 K) through the core spray spargers (core spray) on the top of the core and through feedwater nozzles to the downcomer (downcomer injection). The scope of the study was restricted to cases where the overheated core was still geometrically intact at the start of the reflooding. The following different core reflooding situations were investigated: (1) auxiliary feedwater injection to core spray (45 kg/s); (2) auxiliary feedwater injection to downcomer (45 kg/s); (3) auxiliary feedwater injection to downcomer (45 kg/s) and to core spray (45 kg/s); (4) no reflooding of the core. All the three codes predicted debris formation after the water addition, and in all MAAP and MELCOR reflooding results the core was quenched. The major difference between the code predictions was in the amount of H 2 produced, though the trends in H 2 production were similar. Additional steam production during the quenching process accelerated the oxidation in the unquenched parts of the core. This result is in accordance with several experimental observations
Analysis of Peach Bottom station blackout with MELCOR
International Nuclear Information System (INIS)
Dingman, S.E.; Cole, R.K.; Haskin, F.E.; Summers, R.M.; Webb, S.W.
1987-01-01
A demonstration analysis of station blackout at Peach Bottom has been performed using MELCOR and the results have been compared with those from MARCON 2.1B and the Source Term Code Package (STCP). MELCOR predicts greater in-vessel hydrogen production, earlier melting and core collapse, but later debris discharge than MARCON 2.1B. The drywell fails at vessel breach in MELCOR, but failure is delayed about an hour in MARCON 2.1B. These differences are mainly due to the MELCOR models for candling during melting, in-core axial conduction, and continued oxidation and heat transfer from core debris following lower head dryout. Three sensitivity calculations have been performed with MELCOR to address uncertainties regarding modeling of the core-concrete interactions. The timing of events and the gas and radionuclide release rates are somewhat different in the base case and the three sensitivity cases, but the final conditions and total releases are similar
Calculation of the magnitude of long term contaminated area with COSYMA and MACCS
International Nuclear Information System (INIS)
Grupa, J.
1996-09-01
A severe nuclear accident will contaminate large areas of land. This paper discusses the output that can be obtained with COSYMA and MACCS to evaluate this contamination. Both codes associate contamination with deposition of given nuclides and the severity of contamination is expressed in terms of the ground concentration (Bq/m 2 ). However, for this analysis we decided to judge the severity of the land contamination by the dose rate (Sv/year) to the local inhabitants. To explain the differences between the COSYMA and MACCS results some details of the results were compared. This revealed that the results depend strongly on the choice of the grid if severe contamination occurs beyond about 50 to 100 km from the source. Another important factor to take into account when judging the severity of land contamination is the duration of the contamination; i.e. the time it takes until the contamination has decreased below a given level. Since we judge the contamination by the dose to the local public, the 'averted dose' concept has been used to evaluate the duration of the contamination. (orig.)
Development of Integrated Evaluation System for Severe Accident Management
Energy Technology Data Exchange (ETDEWEB)
Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y
2007-06-15
The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs.
Development of Integrated Evaluation System for Severe Accident Management
International Nuclear Information System (INIS)
Kim, Dong Ha; Kim, K. R.; Park, S. H.; Park, S. Y.; Park, J. H.; Song, Y. M.; Ahn, K. I.; Choi, Y.
2007-06-01
The objective of the project is twofold. One is to develop a severe accident database (DB) for the Korean Standard Nuclear Power plant (OPR-1000) and a DB management system, and the other to develop a localized computer code, MIDAS (Multi-purpose IntegrateD Assessment code for Severe accidents). The MELCOR DB has been constructed for the typical representative sequences to support the previous MAAP DB in the previous phase. The MAAP DB has been updated using the recent version of MAAP 4.0.6. The DB management system, SARD, has been upgraded to manage the MELCOR DB in addition to the MAAP DB and the network environment has been constructed for many users to access the SARD simultaneously. The integrated MIDAS 1.0 has been validated after completion of package-wise validation. As the current version of MIDAS cannot simulate the anticipated transient without scram (ATWS) sequence, point-kinetics model has been implemented. Also the gap cooling phenomena after corium relocation into the RPV can be modeled by the user as an input parameter. In addition, the subsystems of the severe accident graphic simulator are complemented for the efficient severe accident management and the engine of the graphic simulator was replaced by the MIDAS instead of the MELCOR code. For the user's convenience, MIDAS input and output processors are upgraded by enhancing the interfacial programs
A 1ST Step Integration of the Restructured MELCOR for the MIDAS Computer Code
International Nuclear Information System (INIS)
Park, S. H.; Kim, D. H.; Cho, S. W.
2006-01-01
KAERI is developing a localized severe accident code, MIDAS, based on MELCOR. MELCOR uses pointer variables for a fixed-size storage management to save the data. It passes data through two depths, its meaning is not understandable by variable itself. So it is needed to understand the methods for data passing. This method deteriorates the readability, maintainability and portability of the code. As a most important process for a localized severe accident analysis code, it is needed convenient method for data handling. So, it has been used the new features in FORTRAN90 such as a dynamic allocation for the restructuring. The restructuring of the data saving and transferring method of the existing code makes it easy to understand the code. Before an entire restructuring of the code, a restructuring for each package was developed and tested. And then integration of each restructured package was being processed one by one. In this paper, the integrating scope includes the BUR, CF, CVH, DCH, EDF, ESF, MP, SPR, TF and TP packages. As most of them use data within each package and a few packages share data with other packages. The verification was done through comparing the results before and after the restructuring
International Nuclear Information System (INIS)
Cardenas V, J.; Mugica R, C. A.; Godinez S, V.
2013-10-01
In this work was carried out the analysis of two scenarios of the accident type with loss of coolant in a recirculation loop for a break with smaller ares to 0.1 ft 2 (4.6 cm 2 ), which is classified according to their size like small Loca. The first simulated scenario was a small Loca without action of the emergency coolant injection systems, and the second was a small Loca with only the available system LPCS. This design base accident was taken into account for its relevance with regard to the damage to the core and the hydrogen generation. Was also observed and analyzed the response of the action of the ECCS that depend of the loss of coolant reason and this in turn depends of the size and type of the pipe break. The specified scenarios were simulated by means of the use of MELCOR model for the nuclear power plant of Laguna Verde that has the Comision Nacional de Seguridad Nuclear y Salvaguardias. (Author)
MELCOR 1.8.2 assessment: The MP-1 and MP-2 late phase melt progression experiments
International Nuclear Information System (INIS)
Tautges, T.J.
1994-05-01
MELCOR is a fully integrated, engineering-level computer code being developed at Sandia National Laboratories for the USNRC, that models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRs. As a part of an ongoing assessment program, MELCOR has been used to model the MP-1 and MP-2 experiments, which provided data for late-phase melt progression in PWR geometries. Core temperature predicted by MELCOR were within 250--500 K of measured data in both MP-1 and MP-2. Relocation in the debris bed and metallic crust regions of MP-2 was predicted accurately compared to PIE data. Temperature gradients in lower portions of the test bundle were not predicted well in both MP-1 and MP-2, due to the lack of modeling of the heat transfer path to the cooling jacket in those portions of the test bundles. Fifteen sensitivity studies were run on various core (COR), control volume hydrodynamics (CVH) and heat structures (HS) package parameters. No unexpected sensitivities were found, and in particular there were no sensitivities to reduced time step, finer nodalization or to computer platform. Calculations performed by the DEBRIS and TAC2D codes for MP-1 and MP-2 showed better agreement with measured data than those performed by MELCOR. This was expected, through, due to the fully 2-dimensional modeling used in the other codes
Analysis of core uncovery time in Kuosheng station blackout transient with MELCOR
International Nuclear Information System (INIS)
Wang, S.J.; Chien, C.S.
1996-01-01
The MELCOR code, developed by the Sandia National Laboratories, is capable of simulating severe accident phenomena of nuclear power plants. Core uncovery time is an important parameter in the probabilistic risk assessment. However, many MELCOR users do not generate the initial conditions in a station blackout (SBO) transient analysis. Thus, achieving reliable core uncovery time is difficult. The core uncovery time for the Kuosheng nuclear power plant during an SBO transient is analyzed. First, full-power steady-state conditions are generated with the application of a developed self-initialization algorithm. Then the response of the SBO transient up to core uncovery is simulated. The effects of key parameters including the initialization process and the reactor feed pump (RFP) coastdown time on the core uncovery time are analyzed. The initialization process is the most important parameter that affects the core uncovery time. Because SBO transient analysis, the correct initial conditions must be generated to achieve a reliable core uncovery time. The core uncovery time is also sensitive to the RFP coastdown time. A correct time constant is required
International Nuclear Information System (INIS)
Marten-Fuertes, F.
1995-01-01
The use of computer codes to analyze the phenomena of severe accidents is very important to take decisions in Nuclear Safety. This paper presents the MELCOR code used to calculate the TMLB sequence of PWR with natural circulation into the vessels. The main goal of this code is its application for the PSA (probabilistic safety analysis)
International Nuclear Information System (INIS)
Herranz, L. E.; Garcia Martin, M.; Lopez del Pra, C.
2013-01-01
The Fukushima accident on March 11 2011, largely affected nuclear community all over the world. Immediately, many R and D organizations and companies drew their attention to the facts that were being released by Japanese authorities, so that the most through understanding of the situation could be gained at the moment. This paper synthesizes the major progress achieved by CIEMAT in this international environment. The specific target pursued is the comprehension of the severe accident evolution, particularly the progression followed in the unit 1 of Fukushima Daiichi. To do so, the MELCOR 2.1 code has been used to model 6 Fukushima-like SBO sequences in a BWR-Mark I reactor. Particular emphasis has been given to understand the potential impact of systems like the isolation condenser (IC) and the over-pressure protection system. As expected, availability of AC power from a diesel would have drastically changed the scenario, particularly in the containment, due to actuation of DW (Dry-Well) sprays. IC actuation might have delayed the reactor pressure vessel (RPV) failure for hours, if they had performed according to their design. Contrarily, a stuck-open safety relief valve would have resulted in an earlier PRV failure. A definitive picture of the scenario is still far away; however, these results may be seen as a step forward. (Author)
Energy Technology Data Exchange (ETDEWEB)
Herranz, L. E.; Garcia Martin, M.; Lopez del Pra, C.
2013-03-01
The Fukushima accident on March 11 2011, largely affected nuclear community all over the world. Immediately, many R and D organizations and companies drew their attention to the facts that were being released by Japanese authorities, so that the most through understanding of the situation could be gained at the moment. This paper synthesizes the major progress achieved by CIEMAT in this international environment. The specific target pursued is the comprehension of the severe accident evolution, particularly the progression followed in the unit 1 of Fukushima Daiichi. To do so, the MELCOR 2.1 code has been used to model 6 Fukushima-like SBO sequences in a BWR-Mark I reactor. Particular emphasis has been given to understand the potential impact of systems like the isolation condenser (IC) and the over-pressure protection system. As expected, availability of AC power from a diesel would have drastically changed the scenario, particularly in the containment, due to actuation of DW (Dry-Well) sprays. IC actuation might have delayed the reactor pressure vessel (RPV) failure for hours, if they had performed according to their design. Contrarily, a stuck-open safety relief valve would have resulted in an earlier PRV failure. A definitive picture of the scenario is still far away; however, these results may be seen as a step forward. (Author)
Simulation of the QUENCH-06 experiment with MELCOR 1.8.5
International Nuclear Information System (INIS)
Stanojevic, M.; Leskovar, M.
2001-01-01
The MELCOR 1.8.5 code input model and simulation results of the OECD/NEA international standard problem No. 45 (ISP-45) are presented. ISP-45 was performed as QUENCH-06 experiment at Forschungszentrum Karlsruhe. The objectives of the QUENCH program are the analysis of the heat-up, oxidation and delayed reflood phases of a PWR type fuel rod bundle in the QUENCH facility and investigation of the thermal, mechanical, physical and chemical behavior of fuel rod claddings under transient cool-down conditions. The objectives of the OECD/NEA ISP program are the extension of the reflood database to identify key phenomena occurring during accident management measure procedures and code validation, i.e., reliability and accuracy of severe accident codes especially during the quench phase. The QUENCH test bundle is made up of 21 fuel rod simulators approximately 2.5 m long. The Zircaloy-4 rod cladding is identical to that used in pressurized water reactors with respect to material and dimensions. The bundle is heated electrically. The QUENCH-06 experiment had three phases: the pre-oxidation phase, the power transient phase and the reflood-quench phase. According to the ISP-45 specification, the MELCOR 1.8.5 simulation includes the events from the beginning of the pre-oxidation phase until the end of the reflood-quench phase and shut-off of electric power, steam and cooling water. Calculated results are discussed with respect to accuracy, plausibility and completeness. Shortcomings and limitations of the input model are described.(author)
Energy Technology Data Exchange (ETDEWEB)
Yoo, Ji Min; Lee, Dong Hun; Jeong, Jae Jun [Pusan National University, Busan (Korea, Republic of)
2016-05-15
Condensation heat transfer under the presence of noncondensable gases (NCGs) is an important issue in nuclear safety because the presence of even a small quantity of NC gases in the vapor largely reduces the condensation rate. The extensive assessment of the condensation model of the safety analysis codes has been also performed. When NCGs are present, the condensation phenomenon is largely reduced by accumulated NCGs near the condensing surface. Since the total pressure remains constant, the partial pressure of vapor at the liquid-vapor interface is lower than that in the bulk mixture, providing the driving force for vapor diffusion towards the liquid-vapor interface. The main objective of the present study is the assessment of the condensation heat transfer model of the severe accident code MELCOR 1.8.6 under the presence of NCGs. In this study, the condensation heat transfer model of the MELCOR 1.8.6 is assessed using various experiments which have 4 different types of geometry. Through the comparison of the results, it was shown that the MELCOR code generally under-predicts the condensation heat transfer except the condensation on outer surface of vertical pipes and improvement is needed for other geometries.
International Nuclear Information System (INIS)
Kim, Sung Joong; Seo, Seungwon; Lee, Seongnyeon; KIm, Hwan Yeol; Ha, Kwang Soon; Park, Jonghwa; Park, Raejoon
2013-01-01
The objective of this study is first to evaluate various serious severe accident scenarios of OPR1000 with and without in-vessel retention strategies using MELCOR code. Second is to develop a mechanistic model of minimum safety injection flow using the thermal-hydraulic parameters of CET and collapsed water level obtained from the MELCOR simulation results. Effectiveness of RCS depressurization of OPR1000 is investigated for postulated severe accidents of SBLOCA, SBO, and TLOF. It is seen that timely operator action is important to achieve the best mitigation. Also The MELCOR simulation results of SBLOCA, SBO, and TLOFW are utilized to develop a model for minimum safety injection flow. The model suggests that if HPSI is available with RCS pressure lower than 120 bars, the core coolability can be guaranteed. In this study, several MELCOR simulations are conducted in search for effective in-vessel retention strategies over postulated severe accidents of SBLOCA, SBO, and TLOFW of OPR1000. Detailed accident sequences are presented and indicative parameters diagnosing the reactor thermal-hydraulic state are interrogated to provide useful information to the operator actions. To properly assist operator's action during the severe accident, the thermal-hydraulic parameters should be virtual, intuitive, and reliable. In addition, the parameters should be collected through the instrumentations close to the reactor core. In this regard, Core Exit Temperature (CET) and collapsed core water level are deemed as the commensurate parameters
Energy Technology Data Exchange (ETDEWEB)
Kim, Sung Joong; Seo, Seungwon; Lee, Seongnyeon [Hanyang Univ., Seoul (Korea, Republic of); KIm, Hwan Yeol; Ha, Kwang Soon; Park, Jonghwa; Park, Raejoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2013-10-15
The objective of this study is first to evaluate various serious severe accident scenarios of OPR1000 with and without in-vessel retention strategies using MELCOR code. Second is to develop a mechanistic model of minimum safety injection flow using the thermal-hydraulic parameters of CET and collapsed water level obtained from the MELCOR simulation results. Effectiveness of RCS depressurization of OPR1000 is investigated for postulated severe accidents of SBLOCA, SBO, and TLOF. It is seen that timely operator action is important to achieve the best mitigation. Also The MELCOR simulation results of SBLOCA, SBO, and TLOFW are utilized to develop a model for minimum safety injection flow. The model suggests that if HPSI is available with RCS pressure lower than 120 bars, the core coolability can be guaranteed. In this study, several MELCOR simulations are conducted in search for effective in-vessel retention strategies over postulated severe accidents of SBLOCA, SBO, and TLOFW of OPR1000. Detailed accident sequences are presented and indicative parameters diagnosing the reactor thermal-hydraulic state are interrogated to provide useful information to the operator actions. To properly assist operator's action during the severe accident, the thermal-hydraulic parameters should be virtual, intuitive, and reliable. In addition, the parameters should be collected through the instrumentations close to the reactor core. In this regard, Core Exit Temperature (CET) and collapsed core water level are deemed as the commensurate parameters.
Juneja, Manisha; Kobelt, Dennis; Walther, Wolfgang; Voss, Cynthia; Smith, Janice; Specker, Edgar; Neuenschwander, Martin; Gohlke, Björn-Oliver; Dahlmann, Mathias; Radetzki, Silke; Preissner, Robert; von Kries, Jens Peter; Schlag, Peter Michael; Stein, Ulrike
2017-06-01
MACC1 (Metastasis Associated in Colon Cancer 1) is a key driver and prognostic biomarker for cancer progression and metastasis in a large variety of solid tumor types, particularly colorectal cancer (CRC). However, no MACC1 inhibitors have been identified yet. Therefore, we aimed to target MACC1 expression using a luciferase reporter-based high-throughput screening with the ChemBioNet library of more than 30,000 compounds. The small molecules lovastatin and rottlerin emerged as the most potent MACC1 transcriptional inhibitors. They remarkably inhibited MACC1 promoter activity and expression, resulting in reduced cell motility. Lovastatin impaired the binding of the transcription factors c-Jun and Sp1 to the MACC1 promoter, thereby inhibiting MACC1 transcription. Most importantly, in CRC-xenografted mice, lovastatin and rottlerin restricted MACC1 expression and liver metastasis. This is-to the best of our knowledge-the first identification of inhibitors restricting cancer progression and metastasis via the novel target MACC1. This drug repositioning might be of therapeutic value for CRC patients.
Analysis of accident progression in the TEPCO Fukushima Daiichi Nuclear Power Station
Energy Technology Data Exchange (ETDEWEB)
NONE
2013-08-15
One of the objectives of this study is to investigate the early stage of the TEPCO Fukushima Daiichi accident and to check the validity of the countermeasures against the accident. Last year the early stage of the accident was analyzed with use of RELAP5 code, and the longer term analysis was done by MELCOR code. This year, the simulation of reactor water level instrumentation behavior by MELCOR code was performed. Another objective of this study is to analyze of the long term cooling after the Fukushima Daiichi accident by TRACE5 code. In order to simulate the cooling conditions in Fukushima plants after the accident, the parametric calculations were done on the assumption of the existence of steam/liquid leak in Reactor Pressure Vessel (RPV) and Pressure Containment Vessel (PCV) and the variety of debris distribution in RPV and PCV. As a result, the debris distribution in RPV and PCV was estimated by referring plant parameter such as reactor pressure and temperature. (author)
International Nuclear Information System (INIS)
Oh, Jae Yong; Yun, Jong Il; Kim, Do Sam; Han Chul
2011-01-01
Iodine is one of the most important fission products produced in nuclear power plants. Under severe accident condition, iodine exists as a variety of species in the containment such as aqueous iodide, gaseous iodide, iodide aerosol, etc. Following release of iodine from the reactor, mostly in the form of CsI aerosol, volatile iodine can be generated from the containment sump and release to the environment. Especially, volatile organic iodide can be produced from interaction between nonvolatile iodine and organic substances present in the containment. Volatile iodide could significantly influence the alienated residents surrounding the nuclear power plant. In particular, thyroid is vulnerable to radioiodine due to its high accumulation. Therefore, it is necessary for the Korea Institute of Nuclear Safety (KINS) to develop an evaluation model which can simulate iodine behavior in the containment following a severe accident. KINS also needs to make up its methodology for radiological consequence analysis, based on MELCOR-MACCS2 calculation, by coupling a simple iodine model which can conveniently deal with organic iodides. In the long term, such a model can contribute to develop an accident source term, which is one of urgent domestic needs. Our strategy for developing the model is as follows: 1. Review the existing methodologies, 2. Develop a simple stand-alone model, 3. Validate the model using ISTP-EPICUR (Experimental Program on Iodine Chemistry under Radiation) and OECD-BIP (Behavior of Iodine Project) experimental data. In this paper we present the context of development and validation of our model named RAIM (Radio-active iodine chemistry model)
Energy Technology Data Exchange (ETDEWEB)
Oh, Jae Yong; Yun, Jong Il [KAIST, Daejeon (Korea, Republic of); Kim, Do Sam; Han Chul [Korea Institue of Nuclear Safety, Daejeon (Korea, Republic of)
2011-05-15
Iodine is one of the most important fission products produced in nuclear power plants. Under severe accident condition, iodine exists as a variety of species in the containment such as aqueous iodide, gaseous iodide, iodide aerosol, etc. Following release of iodine from the reactor, mostly in the form of CsI aerosol, volatile iodine can be generated from the containment sump and release to the environment. Especially, volatile organic iodide can be produced from interaction between nonvolatile iodine and organic substances present in the containment. Volatile iodide could significantly influence the alienated residents surrounding the nuclear power plant. In particular, thyroid is vulnerable to radioiodine due to its high accumulation. Therefore, it is necessary for the Korea Institute of Nuclear Safety (KINS) to develop an evaluation model which can simulate iodine behavior in the containment following a severe accident. KINS also needs to make up its methodology for radiological consequence analysis, based on MELCOR-MACCS2 calculation, by coupling a simple iodine model which can conveniently deal with organic iodides. In the long term, such a model can contribute to develop an accident source term, which is one of urgent domestic needs. Our strategy for developing the model is as follows: 1. Review the existing methodologies, 2. Develop a simple stand-alone model, 3. Validate the model using ISTP-EPICUR (Experimental Program on Iodine Chemistry under Radiation) and OECD-BIP (Behavior of Iodine Project) experimental data. In this paper we present the context of development and validation of our model named RAIM (Radio-active iodine chemistry model)
Effect of In-Vessel Retention Strategies under Postulated SGTR Accidents of OPR1000
Energy Technology Data Exchange (ETDEWEB)
Choi, Wonjun; Lee, Yongjae; Kim, Sung Joong [Hanyang University, Seoul (Korea, Republic of); Kim, Hwan-Yeol; Park, Rae-Joon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2015-10-15
In this study, MELCOR code was used to simulate the severe accident of the OPR1000. MELCOR code is computer code which enables to simulate the progression of the severe accident for light water reactors. It has been developed by Sandia National Laboratories for plant risk assessment and source term analysis since 1982. According to the probabilistic safety analysis (PSA) Level 1 of OPR1000, typical severe accident scenarios of high probability of a transition to severe accident for OPR1000 were identified as Small Break Loss of Coolant Accident (SBLOCA), Station Black out (SBO), Total Loss of Feed Water (TLOFW), and Steam Generator Tube Rupture. While the first three accidents are expected to result in the generation and transportation of the radioactive nuclides within the containment building as consequence of the core damage and subsequent reactor pressure vessel (RPV) failure, the latter accident scenario may be progressed with possible direct release of the radioactive nuclides to the environment by bypassing the containment building. Thus it is of significance to investigate the SGTR accident with a sophisticated severe accident code. This code can simulate the whole phenomena of a severe accident such as thermal-hydraulic response, core heat-up, oxidation and relocation, and fission product release and transport. Thus many researchers have used MELCOR in severe accident studies. In this study, in-vessel retention strategies were applied for postulated SGTR accidents. Mitigation effect and adverse effect of in-vessel strategies was studied in aspect of RPV failure, fission product release and containment thermal-hydraulic and hydrogen behavior. Base case of SGTR accident and three mitigation cases were simulated using MELCOR code 1.8.6. For each mitigation cases, mitigation effect and adverse effect were investigated. Conclusions can be summarized as follows: (1) RPV failure of SGTR base case occurred at 5.62 hours and fission product of RCS released to
International Nuclear Information System (INIS)
Funayama, Kyoko; Kajimoto, Mitsuhiro; Nagayoshi, Takuji; Tanaka, Nobuo
1999-01-01
In the Level 2 PSA program at INS/NUPEC, MELCOR1.8.3 is extensively applied to analyze radionuclide behavior of dominant sequences. In addition, the revised source terms provided in the NUREG-1465 report have been also discussed to examine the potential of the radionuclides release to the environment in the conventional siting criteria. In the present study, characteristics of source terms to the environment were examined comparing with results by the Hypothetical Accident (LOCA), NUREG-1465 and MELCOR1.8.3. calculation for a typical BWR with a Mark-II containment in order to assure conservatives of the Hypothetical Accident in Japan. Release fractions of iodine to the environment for the Hypothetical Accident and NUREG-1465, which used engineering models for predicting radionuclide behaviors, were about 10 -4 and 10 -6 of core inventory, respectively, while the best estimate MELCOR1.8.3 code predicted 10 -9 of iodine to the environment. The present study showed that the engineering models in the Hypothetical Accident or NUREG-1465 have large conservatives to estimate source term of iodine to the environment. (author)
Application of FFTBM to severe accidents
International Nuclear Information System (INIS)
Prosek, A.; Leskovar, M.
2005-01-01
In Europe an initiative for the reduction of uncertainties in severe accident safety issues was initiated. Generally, the error made in predicting plant behaviour is called uncertainty, while the discrepancies between measured and calculated trends related to experimental facilities are called the accuracy of the prediction. The purpose of the work is to assess the accuracy of the calculations of the severe accident International Standard Problem ISP-46 (Phebus FPT1), performed with two versions of MELCOR 1.8.5 for validation purposes. For the quantitative assessment of calculations the improved fast Fourier transform based method (FFTBM) was used with the capability to calculate time dependent code accuracy. In addition, a new measure for the indication of the time shift between the experimental and the calculated signal was proposed. The quantitative results obtained with FFTBM confirm the qualitative conclusions made during the Jozef Stefan Institute participation in ISP-46. In general good agreement of thermal-hydraulic variables and satisfactory agreement of total releases for most radionuclide classes was obtained. The quantitative FFTBM results showed that for the Phebus FPT1 severe accident experiment the accuracy of thermal-hydraulic variables calculated with the MELCOR severe accident code is close to the accuracy of thermal-hydraulic variables for design basis accident experiments calculated with best-estimate system codes. (author)
MELCOR/CONTAIN LMR Implementation Report. FY14 Progress
Energy Technology Data Exchange (ETDEWEB)
Humphries, Larry L; Louie, David L.Y.
2014-10-01
This report describes the preliminary implementation of the sodium thermophysical properties and the design documentation for the sodium models of CONTAIN-LMR to be implemented into MELCOR 2.1. In the past year, the implementation included two separate sodium properties from two different sources. The first source is based on the previous work done by Idaho National Laboratory by modifying MELCOR to include liquid lithium equation of state as a working fluid to model the nuclear fusion safety research. To minimize the impact to MELCOR, the implementation of the fusion safety database (FSD) was done by utilizing the detection of the data input file as a way to invoking the FSD. The FSD methodology has been adapted currently for this work, but it may subject modification as the project continues. The second source uses properties generated for the SIMMER code. Preliminary testing and results from this implementation of sodium properties are given. In this year, the design document for the CONTAIN-LMR sodium models, such as the two condensable option, sodium spray fire, and sodium pool fire is being developed. This design document is intended to serve as a guide for the MELCOR implementation. In addition, CONTAIN-LMR code used was based on the earlier version of CONTAIN code. Many physical models that were developed since this early version of CONTAIN may not be captured by the code. Although CONTAIN 2, which represents the latest development of CONTAIN, contains some sodium specific models, which are not complete, the utilizing CONTAIN 2 with all sodium models implemented from CONTAIN-LMR as a comparison code for MELCOR should be done. This implementation should be completed in early next year, while sodium models from CONTAIN-LMR are being integrated into MELCOR. For testing, CONTAIN decks have been developed for verification and validation use.
Directory of Open Access Journals (Sweden)
Siniša Šadek
2017-01-01
Full Text Available The integrity of the containment will be challenged during a severe accident due to pressurization caused by the accumulation of steam and other gases and possible ignition of hydrogen and carbon monoxide. Installation of a passive filtered venting system and passive autocatalytic recombiners allows control of the pressure, radioactive releases, and concentration of flammable gases. Thermal hydraulic analysis of the containment equipped with dedicated passive safety systems after a hypothetical station blackout event is performed for a two-loop pressurized water reactor NPP with three integral severe accident codes: ASTEC, MELCOR, and MAAP. MELCOR and MAAP are two major US codes for severe accident analyses, and the ASTEC code is the European code, joint property of Institut de Radioprotection et de Sûreté Nucléaire (IRSN, France and Gesellschaft für Anlagen und Reaktorsicherheit (GRS, Germany. Codes’ overall characteristics, physics models, and the analysis results are compared herein. Despite considerable differences between the codes’ modelling features, the general trends of the NPP behaviour are found to be similar, although discrepancies related to simulation of the processes in the containment cavity are also observed and discussed in the paper.
Effect of RCIC Operating Conditions on the Accident Scenario in Fukushima Unit 2
International Nuclear Information System (INIS)
Kim, Sung Il; Park, Jong Hwa; Ha, Kwang Soon
2015-01-01
This study was conducted by using MELCOR 1.8.6. Fukushima unit 2 accident was analyzed using MELCOR in this study, and best estimate scenario with considering RCIC operating conditions was presented. Researches on the boiling water reactor (BWR) plant with reactor core isolation cooling (RCIC) system have been conducted. Research on the RCIC operation in Fukushima unit 2 was also conducted by Sandia National Laboratory. MELCOR analysis of the Fukushima unit 2 accident was conducted in the report and energy balance in wetwell was described by considering RCIC operation. However, the effect of RCIC operation condition on the accident scenario has not been studied. The operating conditions of RCIC system affect the pressures in wetwell and drywell, and the high pressure can make leakage path of fission product from PCV to reactor building. Thus it can be directly related with the amount of fission product which released to environment. In this study, severe accident on Fukushima unit 2 was analyzed considering the operating condition of RCIC system, and best estimated scenario was presented. In addition, the effect of RCIC turbine efficiency on the accident progression was examined. Energy balance in suppression chamber was also considered with discussion on the effect of torus room flooding level. It was found that the operating condition of RCIC turbine not only affects the variation of drywell pressure but also the amount of released fission products to environment. It was also confirmed that the RCIC turbine efficiency in the accident would be less than normal operating condition
Energy Technology Data Exchange (ETDEWEB)
Gauntt, Randall O. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mattie, Patrick D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2016-01-01
Sandia National Laboratories (SNL) has conducted an uncertainty analysis (UA) on the Fukushima Daiichi unit (1F1) accident progression with the MELCOR code. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). That study focused on reconstructing the accident progressions, as postulated by the limited plant data. This work was focused evaluation of uncertainty in core damage progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, reactor damage state, fraction of intact fuel, vessel lower head failure). The primary intent of this study was to characterize the range of predicted damage states in the 1F1 reactor considering state of knowledge uncertainties associated with MELCOR modeling of core damage progression and to generate information that may be useful in informing the decommissioning activities that will be employed to defuel the damaged reactors at the Fukushima Daiichi Nuclear Power Plant. Additionally, core damage progression variability inherent in MELCOR modeling numerics is investigated.
Severe accident sequences simulated at the Grand Gulf Nuclear Station
International Nuclear Information System (INIS)
Carbajo, J.J.
1999-01-01
Different severe accident sequences employing the MELCOR code, version 1.8.4 QK, have been simulated at the Grand Gulf Nuclear Station (Grand Gulf). The postulated severe accidents simulated are two low-pressure, short-term, station blackouts; two unmitigated small-break (SB) loss-of-coolant accidents (LOCAs) (SBLOCAs); and one unmitigated large LOCA (LLOCA). The purpose of this study was to calculate best-estimate timings of events and source terms for a wide range of severe accidents and to compare the plant response to these accidents
International Nuclear Information System (INIS)
Valle Cepero, Reinaldo
2004-01-01
The results of the PSA-I applied to the Atucha I nuclear power plant (CNA I) determine the accidental sequences with the most influence related to the probability of the core reactor damage. Among those sequences are include, the Station Blackout and lost of primary coolant, combine with the failure of the emergency injection systems by pipe breaks of diameters between DN100 - DN25 or equivalent areas, Small LOCA. This paper has the objective to model and analyze the behavior of the primary circuit and the pressure vessel during the evolution of those two accidental sequences. It presented a detailed analysis of the main phenomena that occur from the initial moment of the accident to the failure moment of the pressure vessel and the melt material fall to the reactor cavity. Two sequences were taken into account, considering the main phenomena (core uncover, heating, fuel element oxidation, hydrogen generation, degradation and relocation of the melt material, failure of the support structures, etc.) and the time of occurrence, of those events will be different, if it is considered that both sequences will be developed in different scenarios. One case is an accident with the primary circuit to a high pressure (Station Blackout scenario) and the other with a early primary circuit depressurization due to the lost of primary coolant. For this work the MELCOR 1.8.5 code was used and it allows within a unified framework to modeling an extensive spectrum of phenomenology associated with the severe accidents. (author)
The effect of system modeling on the Fukushima accident evolution
Energy Technology Data Exchange (ETDEWEB)
Herranz, L.E.; Fontanet, J.; López, C.; Fernández, E.
2015-07-01
The Fukushima accident is becoming both a unique opportunity and a huge challenge for severe accident analysis. The OECD-BSAF project has articulated a good part of the modeling efforts conducted so far. Inside this project, CIEMAT has conducted forensic analyses of the Fukushima accident in units 1 through 3 with MELCOR 2.1 and it has postulated a set of accident scenarios consistent with data. Beyond specific results, sensitivity analyses on safety systems performance and prevailing boundary conditions have highlighted the need of conducting uncertainty analyses when modeling NPPs severe accident scenarios. (Author)
Summary of MELCOR 1.8.2 calculations for three LOCA sequences (AG, S2D, and S3D) at the Surry Plant
International Nuclear Information System (INIS)
Kmetyk, L.; Smith, L.
1994-03-01
Activities involving regulatory implementation of updated source term information were pursued. These activities include the identification of the source term, the identification of the chemical form of iodine in the source term, and the timing of the source term's entrance into containment. These activities are intended to support a more realistic source term for licensing nuclear power plants than the current TID-14844 source term and current licensing assumptions. MELCOR calculations were performed to support the technical basis for the updated source term. This report presents the results from three MELCOR calculations of nuclear power plant accident sequences and presents comparisons with Source Term code Package (STCP) calculations for the same sequences. The three low-pressure sequences were analyzed to identify the materials which enter containment (source terms) and are available for release to the environment, and to obtain timing of sequence events. The source terms include fission products and other materials such as those generated by core-concrete interactions. All three calculations, for both MELCOR and STCP, analyzed the Surry plant, a pressurized water reactor (PWR) with a subatmospheric containment design
Energy Technology Data Exchange (ETDEWEB)
Gauntt, Randall O.; Powers, Dana Auburn; Ashbaugh, Scott G.; Leonard, Mark Thomas; Longmire, Pamela
2010-04-01
In this study, risk-significant pressurized-water reactor severe accident sequences are examined using MELCOR 1.8.5 to explore the range of fission product releases to the reactor containment building. Advances in the understanding of fission product release and transport behavior and severe accident progression are used to render best estimate analyses of selected accident sequences. Particular emphasis is placed on estimating the effects of high fuel burnup in contrast with low burnup on fission product releases to the containment. Supporting this emphasis, recent data available on fission product release from high-burnup (HBU) fuel from the French VERCOR project are used in this study. The results of these analyses are treated as samples from a population of accident sequences in order to employ approximate order statistics characterization of the results. These trends and tendencies are then compared to the NUREG-1465 alternative source term prescription used today for regulatory applications. In general, greater differences are observed between the state-of-the-art calculations for either HBU or low-burnup (LBU) fuel and the NUREG-1465 containment release fractions than exist between HBU and LBU release fractions. Current analyses suggest that retention of fission products within the vessel and the reactor coolant system (RCS) are greater than contemplated in the NUREG-1465 prescription, and that, overall, release fractions to the containment are therefore lower across the board in the present analyses than suggested in NUREG-1465. The decreased volatility of Cs2MoO4 compared to CsI or CsOH increases the predicted RCS retention of cesium, and as a result, cesium and iodine do not follow identical behaviors with respect to distribution among vessel, RCS, and containment. With respect to the regulatory alternative source term, greater differences are observed between the NUREG-1465 prescription and both HBU and LBU predictions than exist between HBU and LBU
An Integration of the Restructured Melcor for the Midas Computer Code
International Nuclear Information System (INIS)
Sunhee Park; Dong Ha Kim; Ko-Ryu Kim; Song-Won Cho
2006-01-01
The developmental need for a localized severe accident analysis code is on the rise. KAERI is developing a severe accident code called MIDAS, which is based on MELCOR. In order to develop the localized code (MIDAS) which simulates a severe accident in a nuclear power plant, the existing data structure is reconstructed for all the packages in MELCOR, which uses pointer variables for data transfer between the packages. During this process, new features in FORTRAN90 such as a dynamic allocation are used for an improved data saving and transferring method. Hence the readability, maintainability and portability of the MIDAS code have been enhanced. After the package-wise restructuring, the newly converted packages are integrated together. Depending on the data usage in the package, two types of packages can be defined: some use their own data within the package (let's call them independent packages) and the others share their data with other packages (dependent packages). For the independent packages, the integration process is simple to link the already converted packages together. That is, the package-wise structuring does not require further conversion of variables for the integration process. For the dependent packages, extra conversion is necessary to link them together. As the package-wise restructuring converts only the corresponding package's variables, other variables defined from other packages are not touched and remain as it is. These variables are to be converted into the new types of variables simultaneously as well as the main variables in the corresponding package. Then these dependent packages are ready for integration. In order to check whether the integration process is working well, the results from the integrated version are verified against the package-wise restructured results. Steady state runs and station blackout sequences are tested and the major variables are found to be the same each other. In order to verify the results, the integrated
Development of severe accident guidance module for the SATS simulator
International Nuclear Information System (INIS)
Kim, K.R.; Park, S.H.; Kim, D.H.; Song, Y.M.
2004-01-01
Recently KAERI has developed the severe accident management guidance to establish Korea standard severe accident management system. On the other hand the PC-based severe accident training simulator SATS has been developed, which uses MELCOR code as the simulation engine. SATS graphically displays and simulates the severe accidents with interactive user commands. The control capability of SATS could make severe accident training course more interesting and effective. In this paper we will describe the development and functions of the electrical hypertext guidance module HyperKAMG and the SATS-HyperKAMG linkage system for the severe accident management. (author)
Energy Technology Data Exchange (ETDEWEB)
Little, M.P.; Muirhead, C.R. [National Radiological Protection Board (United Kingdom); Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M. [Delft Univ. of Technology (Netherlands); Harper, F.T. [Sandia National Labs., Albuquerque, NM (United States); Hora, S.C. [Univ. of Hawaii, Hilo, HI (United States)
1997-12-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA late health effects models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the expert panel on late health effects, (4) short biographies of the experts, and (5) the aggregated results of their responses.
Energy Technology Data Exchange (ETDEWEB)
Haskin, F.E. [Univ. of New Mexico, Albuquerque, NM (United States); Harper, F.T. [Sandia National Labs., Albuquerque, NM (United States); Goossens, L.H.J.; Kraan, B.C.P. [Delft Univ. of Technology (Netherlands)
1997-12-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA early health effects models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on early health effects, (4) short biographies of the experts, and (5) the aggregated results of their responses.
Energy Technology Data Exchange (ETDEWEB)
Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M. [Delft Univ. of Technology (Netherlands); Harrison, J.D. [National Radiological Protection Board (United Kingdom); Harper, F.T. [Sandia National Labs., Albuquerque, NM (United States); Hora, S.C. [Univ. of Hawaii, Hilo, HI (United States)
1998-04-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA internal dosimetry models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on internal dosimetry, (4) short biographies of the experts, and (5) the aggregated results of their responses.
MELCOR/CONTAIN LMR Implementation Report-Progress FY15
Energy Technology Data Exchange (ETDEWEB)
Humphries, Larry L.; Louie, David
2016-01-01
This report describes the progress of the CONTAIN-LMR sodium physics and chemistry models to be implemented in to MELCOR 2.1. It also describes the progress to implement these models into CONT AIN 2 as well. In the past two years, the implementation included the addition of sodium equations of state and sodium properties from two different sources. The first source is based on the previous work done by Idaho National Laborat ory by modifying MELCOR to include liquid lithium equation of state as a working fluid to mode l the nuclear fusion safety research. The second source uses properties generated for the SIMMER code. Testing and results from this implementation of sodium pr operties are given. In addition, the CONTAIN-LMR code was derived from an early version of C ONTAIN code. Many physical models that were developed sin ce this early version of CONTAIN are not captured by this early code version. Therefore, CONTAIN 2 is being updated with the sodium models in CONTAIN-LMR in or der to facilitate verification of these models with the MELCOR code. Although CONTAIN 2, which represents the latest development of CONTAIN, now contains ma ny of the sodium specific models, this work is not complete due to challenges from the lower cell architecture in CONTAIN 2, which is different from CONTAIN- LMR. This implementation should be completed in the coming year, while sodi um models from C ONTAIN-LMR are being integrated into MELCOR. For testing, CONTAIN decks have been developed for verification and validation use. In terms of implementing the sodium m odels into MELCOR, a separate sodium model branch was created for this document . Because of massive development in the main stream MELCOR 2.1 code and the require ment to merge the latest code version into this branch, the integration of the s odium models were re-directed to implement the sodium chemistry models first. This change led to delays of the actual implementation. For aid in the future implementation of sodium
Development of a totally integrated severe accident training system
International Nuclear Information System (INIS)
Kim, Ko Ryu; Park, Sun Hee; Choi, Young; Kim, Dong Ha
2006-01-01
Recently KAERI has developed the severe accident management guidance to establish the Korea standard severe accident management system. On the other hand the PC-based severe accident training simulator SATS has been developed, which uses the MELCOR code as the simulation engine. The simulator SATS graphically displays and simulates the severe accidents with interactive user commands. Especially the control capability of SATS could make a severe accident training course more interesting and effective. In this paper we will describe the development and functions of the electrical guidance module, HyperKAMG, and the SATS-HyperKAMG linkage system designed for a totally integrated and automated severe accident training. (author)
MELCOR development for existing and advanced reactors
International Nuclear Information System (INIS)
Summers, R.M.
1993-01-01
Recent efforts in MELCOR development to address previously identified deficiencies have resulted in release of MELCOR 1.8.2, a much-improved version of the code. Major new models have been implemented for direct containment heating, ice condensers, debris quenching, lower plenum debris behavior, core materials interactions' and radial relocation of debris. Significant improvements have also been made in the modeling of interfacial momentum exchange and in the modeling of fission product release, condensation/evaporation, and aerosol behavior. Efforts are underway to address two-phase hydrodynamics difficulties, to improve modeling of water condensation on structures and fine-scale natural circulation within the reactor vessel, and to implement CORCON-Mod3. Improvements are also being made to MELCOR's capability to handle new features of the advanced light water reactor designs, including drainage of water films on connected heat structures, heat transfer from the external surface of the reactor vessel to a flooded cavity, and creep rupture failure of the lower head. Additional development needs in other areas are discussed
Development of a MELCOR Sodium Chemistry (NAC) Package - FY17 Progress.
Energy Technology Data Exchange (ETDEWEB)
Louie, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2018-02-01
This report describes the status of the development of MELCOR Sodium Chemistry (NAC) package. This development is based on the CONTAIN-LMR sodium physics and chemistry models to be implemented in MELCOR. In the past three years, the sodium equation of state as a working fluid from the nuclear fusion safety research and from the SIMMER code has been implemented into MELCOR. The chemistry models from the CONTAIN-LMR code, such as the spray and pool fire mode ls, have also been implemented into MELCOR. This report describes the implemented models and the issues encountered. Model descriptions and input descriptions are provided. Development testing of the spray and pool fire models is described, including the code-to-code comparison with CONTAIN-LMR. The report ends with an expected timeline for the remaining models to be implemented, such as the atmosphere chemistry, sodium-concrete interactions, and experimental validation tests .
MELCOR 1.8.1 calculations of ISP31: The CORA-13 experiment
International Nuclear Information System (INIS)
Gross, R.J.; Thompson, S.L.; Martinez, G.M.
1993-06-01
The MELCOR code was used to simulate one of GRS's (a reactor research group in Germany) core degradation experiments conducted in the CORA out-of-pile test facility. This test, designated CORA-13, was selected as one of the International Standard Problems, Number ISP31, by the Organization for Economic Cooperation and Development. In this blind calculation, only initial and boundary conditions were provided. The experiment consisted of a small core bundle of twenty-five PWR fuel elements that was electrically heated to temperatures greater than 2,800 K. The experiment composed three phases: a 3,000 second gas preheat phase, an 1,870 second transient phase, and a 180 second water quench phase. MELCOR predictions are compared both to the experimental data and to eight other ISP31 submittals. Temperatures of various components, energy balance, zircaloy oxidation, and core blockage are examined. Up to the point where oxidation was significant, MELCOR temperatures agreed very well with the experiment -- usually to within 50 K. MELCOR predicted oxidation to occur about 100 seconds earlier and at a faster rate than experimental data. The large oxidation spike that occurred during quench was not predicted. However, the experiment produced 210 grams of hydrogen, while MELCOR predicted 184 grams, which was one of the closest integral predictions of the nine submittals. Core blockage was of the right magnitude; however, material collected on the lower grid spacer in the experiment at an axial location of 450 mm, while in MELCOR the material collected at the 50 to 150 mm location. In general, compared to the other submittals, the MELCOR calculation was superior
MELCOR 1.8.1 calculations of ISP31: The CORA-13 experiment
Energy Technology Data Exchange (ETDEWEB)
Gross, R.J.; Thompson, S.L.; Martinez, G.M.
1993-06-01
The MELCOR code was used to simulate one of GRS`s (a reactor research group in Germany) core degradation experiments conducted in the CORA out-of-pile test facility. This test, designated CORA-13, was selected as one of the International Standard Problems, Number ISP31, by the Organization for Economic Cooperation and Development. In this blind calculation, only initial and boundary conditions were provided. The experiment consisted of a small core bundle of twenty-five PWR fuel elements that was electrically heated to temperatures greater than 2,800 K. The experiment composed three phases: a 3,000 second gas preheat phase, an 1,870 second transient phase, and a 180 second water quench phase. MELCOR predictions are compared both to the experimental data and to eight other ISP31 submittals. Temperatures of various components, energy balance, zircaloy oxidation, and core blockage are examined. Up to the point where oxidation was significant, MELCOR temperatures agreed very well with the experiment -- usually to within 50 K. MELCOR predicted oxidation to occur about 100 seconds earlier and at a faster rate than experimental data. The large oxidation spike that occurred during quench was not predicted. However, the experiment produced 210 grams of hydrogen, while MELCOR predicted 184 grams, which was one of the closest integral predictions of the nine submittals. Core blockage was of the right magnitude; however, material collected on the lower grid spacer in the experiment at an axial location of 450 mm, while in MELCOR the material collected at the 50 to 150 mm location. In general, compared to the other submittals, the MELCOR calculation was superior.
Modeling and analyses of postulated UF6 release accidents in gaseous diffusion plant
International Nuclear Information System (INIS)
Kim, S.H.; Taleyarkhan, R.P.; Keith, K.D.; Schmidt, R.W.; Carter, J.C.; Dyer, R.H.
1995-10-01
Computer models have been developed to simulate the transient behavior of aerosols and vapors as a result of a postulated accident involving the release of uranium hexafluoride (UF 6 ) into the process building of a gaseous diffusion plant. UF 6 undergoes an exothermic chemical reaction with moisture (H 2 O) in the air to form hydrogen fluoride (HF) and radioactive uranyl fluoride (UO 2 F 2 ). As part of a facility-wide safety evaluation, this study evaluated source terms consisting of UO 2 F 2 as well as HF during a postulated UF 6 release accident in a process building. In the postulated accident scenario, ∼7900 kg (17,500 lb) of hot UF 6 vapor is released over a 5 min period from the process piping into the atmosphere of a large process building. UO 2 F 2 mainly remains as airborne-solid particles (aerosols), and HF is in a vapor form. Some UO 2 F 2 aerosols are removed from the air flow due to gravitational settling. The HF and the remaining UO 2 F 2 are mixed with air and exhausted through the building ventilation system. The MELCOR computer code was selected for simulating aerosols and vapor transport in the process building. MELCOR model was first used to develop a single volume representation of a process building and its results were compared with those from past lumped parameter models specifically developed for studying UF 6 release accidents. Preliminary results indicate that MELCOR predicted results (using a lumped formulation) are comparable with those from previously developed models
Energy Technology Data Exchange (ETDEWEB)
Brown, J. [National Radiological Protection Board (United Kingdom); Goossens, L.H.J.; Kraan, B.C.P. [Delft Univ. of Technology (Netherlands)] [and others
1997-06-01
This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses.
International Nuclear Information System (INIS)
Brown, J.; Goossens, L.H.J.; Kraan, B.C.P.
1997-06-01
This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses
Air ingression calculations for selected plant transients using MELCOR
International Nuclear Information System (INIS)
Kmetyk, L.N.
1994-01-01
Two sets of MELCOR calculations have been completed studying the effects of air ingression on the consequences of various severe accident scenarios. One set of calculations analyzed a station blackout with surge line failure prior to vessel breach, starting from nominal operating conditions; the other set of calculations analyzed a station blackout occurring during shutdown (refueling) conditions. Both sets of analyses were for the Surry plant, a three-loop Westinghouse PWR. For both accident scenarios, a basecase calculation was done, and then repeated with air ingression from containment into the core region following core degradation and vessel failure. In addition to the two sets of analyses done for this program, a similar air-ingression sensitivity study was done as part of a low-power/shutdown PRA, with results summarized here; that PRA study also analyzed a station blackout occurring during shutdown (refueling) conditions, but for the Grand Gulf plant, a BWR/6 with Mark III containment. These studies help quantify the amount of air that would have to enter the core region to have a significant impact on the severe accident scenario, and demonstrate that one effect, of air ingression is substantial enhancement of ruthenium release. These calculations also show that, while the core clad temperatures rise more quickly due to oxidation with air rather than steam, the core also degrades and relocates more quickly, so that no sustained, enhanced core heatup is predicted to occur with air ingression
Source term analyses under severe accidents for KNGR
Energy Technology Data Exchange (ETDEWEB)
Song, Yong Mann; Park, Soo Yong
2001-03-01
In this study, in-containment source term for LOFW (Loss of Feed Water), which has appeared the most frequent core melt accident, is calculated and compared with NUREG-1465 source term. This study provides not only new source term data using MELCOR1.8.4 and its state-of-the-art models but also evaluating basis of KNGR design and its mitigation capability under severe accidents. As the selected accident is identical with LOFW-S17, which has been analyzed using MAAP by KEPCO with only difference of 2 SITs, mutual comparison of the results is especially expected.
Evaluation of Coolant Injection Procedure in the Severe Accident Management Strategy of APR1400
International Nuclear Information System (INIS)
Cho, Yongjin; Lim, Kukhee; Song, Sungchu; Lee, Sukho; Hwang, Taesuk
2013-01-01
A coolant injection strategy in the severe accident management guideline (SAMG) of APR1400 relates to immediate coolant injection into RCS (Reactor Coolant System) or injection following the recovery of secondary coolant inventory. This strategy could play important role in accident mitigation and radiological consequences. In this study, appropriateness of the strategy was evaluated using MELCOR1.8.6 and several sensitivity studies of the key parameters were performed. Analysis for APR1400 using MELCOR 1.8.6 was performed to evaluate the effectiveness of accident management strategies and the following conclusions were identified. Sequential operation of secondary and RCS injection may not be the best strategy and the simultaneous injection of secondary and RCS injection could be more preferable. At least, the RCS injection should start before complete drainage of water in the safety injection tank using mobile pumps. In this study, the effectiveness of timing of operator action has been examined and the amount of injection flowrate needs to be studied in the future
MELCOR 1.8.1 assessment: PNL Ice Condenser Aerosol Experiments
International Nuclear Information System (INIS)
Gross, R.J.
1993-06-01
The MELCOR code was used to simulate PNL's Ice Condenser Experiments 11-6 and 16-11. In these experiments, ZnS was injected into a mixing chamber, and the combined steam/air/aerosol mixture flowed into an ice condenser which was l4.7m tall. Experiment 11-6 was a low flow test; Experiment l6-1l was a high flow test. Temperatures in the ice condenser region and particle retention were measured in these tests. MELCOR predictions compared very well to the experimental data. The MELCOR calculations were also compared to CONTAIN code calculations for the same tests. A number of sensitivity studies were performed. It as found that simulation time step, aerosol parameters such as the number of MAEROS components and sections used and the particle density, and ice condenser parameters such as the energy capacity of the ice, ice heat transfer coefficient multiplier, and ice heat structure characteristic length all could affect the results. Thermal/hydraulic parameters such as control volume equilibrium assumptions, flow loss coefficients, and the bubble rise model were found to affect the results less significantly. MELCOR results were not machine dependent for this problem
Mg/O2 Battery Based on the Magnesium-Aluminum Chloride Complex (MACC) Electrolyte
DEFF Research Database (Denmark)
Vardar, Galin; Smith, Jeffrey G.; Thomson, Travis
2016-01-01
Mg/O2 cells employing a MgCl2/AlCl3/DME (MACC/DME) electrolyte are cycled and compared to cells with modified Grignard electrolytes, showing that performance of magnesium/oxygen batteries depends strongly on electrolyte composition. Discharge capacity is far greater for MACC/DME-based cells, whil...
Energy Technology Data Exchange (ETDEWEB)
Goossens, L.H.J.; Kraan, B.C.P.; Cooke, R.M. [Delft Univ. of Technology (Netherlands); Boardman, J. [AEA Technology (United Kingdom); Jones, J.A. [National Radiological Protection Board (United Kingdom); Harper, F.T.; Young, M.L. [Sandia National Labs., Albuquerque, NM (United States); Hora, S.C. [Univ. of Hawaii, Hilo, HI (United States)
1997-12-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the consequence from the accidental releases of radiological material from hypothesized accidents at nuclear installations. In 1991, the US Nuclear Regulatory Commission and the Commission of the European Communities began cosponsoring a joint uncertainty analysis of the two codes. The ultimate objective of this joint effort was to systematically develop credible and traceable uncertainty distributions for the respective code input variables. A formal expert judgment elicitation and evaluation process was identified as the best technology available for developing a library of uncertainty distributions for these consequence parameters. This report focuses on the results of the study to develop distribution for variables related to the MACCS and COSYMA deposited material and external dose models. This volume contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures, (3) the rationales and results for the panel on deposited material and external doses, (4) short biographies of the experts, and (5) the aggregated results of their responses.
Energy Technology Data Exchange (ETDEWEB)
Cardenas V, J.; Mugica R, C. A.; Godinez S, V., E-mail: Jaime.cardenas@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)
2013-10-15
In this work was carried out the analysis of two scenarios of the accident type with loss of coolant in a recirculation loop for a break with smaller ares to 0.1 ft{sup 2} (4.6 cm{sup 2}), which is classified according to their size like small Loca. The first simulated scenario was a small Loca without action of the emergency coolant injection systems, and the second was a small Loca with only the available system LPCS. This design base accident was taken into account for its relevance with regard to the damage to the core and the hydrogen generation. Was also observed and analyzed the response of the action of the ECCS that depend of the loss of coolant reason and this in turn depends of the size and type of the pipe break. The specified scenarios were simulated by means of the use of MELCOR model for the nuclear power plant of Laguna Verde that has the Comision Nacional de Seguridad Nuclear y Salvaguardias. (Author)
Development of the severe accident management guidance module for the SATS training simulator
International Nuclear Information System (INIS)
Kim, K. R.; Park, S. H.; Kim, D. H.
2004-01-01
Recently KAERI has developed severe accident management guidance to establish Korea standard severe accident management system. On the other hand PC-based severe accident training simulator SATS has been developed, which uses MELCOR computing code as the simulation engine. SATS graphically displays and simulates the severe accident progression with interactive user inputs. The control capability of SATS makes a severe accident training course more interesting and effective. In this paper the development and functions of HyperKAMG module are explained. Furthermore easiness and effectiveness of the HyperKAMG-SATS system in severe accident management are described
Energy Technology Data Exchange (ETDEWEB)
Lee, Su Won
2011-02-15
The severe accident has inherently significant uncertainty due to wide range of conditions and performing experiments, validation and practical application are extremely difficult because of its high temperature and pressure. Although internal and external researches were put into practice, the reference used in Korean nuclear plants were foreign data of 1980s and safety analysis as the probabilistic safety assessment has not applied the newest methodology. Also, it is applied to containment pressure formed into point value as results of thermal hydraulic analysis to identify the probability of containment failure in level 2 PSA. In this paper, the uncertainty analysis methods for phenomena of severe accident influencing early containment failure were developed, the uncertainty analysis that apply Korean nuclear plants using the MELCOR code was performed and it is a point of view to present the distribution of containment pressure as a result of uncertainty analysis. Because early containment failure is important factor of Large Early Release Frequency(LERF) that is used as representative criteria of decision-making in nuclear power plants, it was selected in this paper among various modes of containment failure. Important phenomena of early containment failure at severe accident based on previous researches were comprehended and methodology of 7th steps to evaluate uncertainty was developed. The MELCOR input for analysis of the severe accident reflected natural circulation flow was developed and the accident scenario for station black out that was representative initial event of early containment failure was determined. By reviewing the internal model and correlation for MELCOR model relevant important phenomena of early containment failure, the uncertainty factors which could affect on the uncertainty were founded and the major factors were finally identified through the sensitivity analysis. In order to determine total number of MELCOR calculations which can
Directory of Open Access Journals (Sweden)
Bruno Gonfiotti
2017-01-01
Full Text Available The integral Phébus tests were probably one of the most important experimental campaigns performed to investigate the progression of severe accidents in light water reactors. In these tests, the degradation of a PWR fuel bundle was investigated employing different control rod materials and burn-up levels in strongly or weakly oxidizing conditions. From the results of such tests, numerical codes such as ASTEC and MELCOR have been developed to describe the evolution of a severe accident. After the termination of the experimental Phébus campaign, these two codes were furthermore expanded. Therefore, the aim of the present work is to reanalyze the first Phébus test (FPT-0 employing the updated ASTEC and MELCOR versions to ensure that the new improvements introduced in such codes allow also a better prediction of these Phébus tests. The analysis focuses on the stand-alone containment aspects of this test, and the paper summarizes the main thermal-hydraulic results and presents different sensitivity analyses carried out on the aerosols and fission products behavior. This paper is part of a series of publications covering the four executed Phébus tests employing a solid PWR fuel bundle: FPT-0, FPT-1, FPT-2, and FPT-3.
Directory of Open Access Journals (Sweden)
Schmid Felicitas
2012-07-01
Full Text Available Abstract Background Colorectal cancer is one of the main cancers in the Western world. About 90% of the deaths arise from formation of distant metastasis. The expression of the newly identified gene metastasis associated in colon cancer 1 (MACC1 is a prognostic indicator for colon cancer metastasis. Here, we analyzed for the first time the impact of single nucleotide polymorphisms (SNPs in the coding region of MACC1 for clinical outcome of colorectal cancer patients. Additionally, we screened met proto-oncogene (Met, the transcriptional target gene of MACC1, for mutations. Methods We sequenced the coding exons of MACC1 in 154 colorectal tumors (stages I, II and III and the crucial exons of Met in 60 colorectal tumors (stages I, II and III. We analyzed the association of MACC1 polymorphisms with clinical data, including metachronous metastasis, UICC stages, tumor invasion, lymph node metastasis and patients’ survival (n = 154, stages I, II and III. Furthermore, we performed biological assays in order to evaluate the functional impact of MACC1 SNPs on the motility of colorectal cancer cells. Results We genotyped three MACC1 SNPs in the coding region. Thirteen % of the tumors had the genotype cg (rs4721888, L31V, 48% a ct genotype (rs975263, S515L and 84% a gc or cc genotype (rs3735615, R804T. We found no association of these SNPs with clinicopathological parameters or with patients’ survival, when analyzing the entire patients’ cohort. An increased risk for a shorter metastasis-free survival of patients with a ct genotype (rs975263 was observed in younger colon cancer patients with stage I or II (P = 0.041, n = 18. In cell culture, MACC1 SNPs did not affect MACC1-induced cell motility and proliferation. Conclusion In summary, the identification of coding MACC1 SNPs in primary colorectal tumors does not improve the prediction for metastasis formation or for patients’ survival compared to MACC1 expression analysis alone. The ct genotype (rs
Benchmarking MELCOR 1.8.2 for ITER Against Recent EVITA Results
International Nuclear Information System (INIS)
Merrill, Brad J.
2007-01-01
A version of MELCOR 1.8.2 modified for use in ITER Preliminary Safety Report analyses was validated against recent data from the EVITA facility located in Cadarache, France. EVITA Test Series 7 was used for this study to verify MELCOR's ability to predict the pressures, temperatures, cryoplate ice mass, and vacuum vessel (VV) condensate mass for test conditions in EVITA that include injections of steam, nitrogen, and water in to the EVITA VV after the walls had been heated to 165 C and the cryoplate had been cooled to -193 C. In general, the ability of MELCOR to predict the VV pressure and wall temperatures for the steam only and water only injection tests was very good. Predicted ice layer masses where larger than reported for the EVITA cryoplate, in particular for the steam only injection tests (∼40% too high), and the predicted condensate masses were less that measured in EVITA. Both of these discrepancies can be explained by ice porosity. The modified MELCOR 1.8.2 over predicts the EVITA VV pressure for the co-injection tests (e.g., steam plus nitrogen, or water plus nitrogen injections) by almost a factor of two. Based on parametric runs that where made by increasing the predicted cryoplate condensation rate, it is believed that this pressure over prediction is a result of an under predicted cryoplate condensation rate. The particulars of this study are documented in this report as well as conclusions about the impact this study has regarding the use of this version of MELCOR for consequence analyses for ITER safety reports
Analysis of Fukushima unit 2 accident considering the operating conditions of RCIC system
Energy Technology Data Exchange (ETDEWEB)
Kim, Sung Il, E-mail: sikim@kaeri.re.kr; Park, Jong Hwa; Ha, Kwang Soon; Cho, Song-Won; Song, JinHo
2016-03-15
Highlights: • Fukushima unit 2 accident was analyzed using MELCOR 1.8.6. • RCIC operating conditions were assumed and best case was selected. • Effect of RCIC operating condition on accident scenario was found. - Abstract: A severe accident in Fukushima occurred on March 11, 2011 and units 1, 2 and 3 were damaged severely. A tsunami following an earthquake made the supply of electricity power stop, and the safety systems, which use AC or DC power in plants could not operate properly. It is supposed that the degree of core degradation of unit 2 is less serious than in the other plants, and it was estimated that the operation of reactor core isolation cooling (RCIC) system at the initial stage of the accident minimized the core damage through decay heat removal. Although the operating conditions of the RCIC system are not known clearly, it can be important to analyze the accident scenario of unit 2. In this study, best case of the Fukushima unit 2 accident was presented considering the operating conditions of the RCIC system. The effects of operating condition on core degradation and fission product release rate to environment were also examined. In addition, importance of torus room flooding level in the accident analysis was discussed. MELCOR 1.8.6 was used in this research, and the geometries of plant and operating conditions of safety system were obtained from TEPCO through OECD/NEA BSAF Project.
Severe accident recriticality analyses (SARA)
DEFF Research Database (Denmark)
Frid, W.; Højerup, C.F.; Lindholm, I.
2001-01-01
with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality-both super-prompt power bursts and quasi steady-state power......Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies......, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g(-1), was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s(-1). In most cases, however, the predicted energy deposition was smaller, below...
A simplified model for calculating early offsite consequences from nuclear reactor accidents
International Nuclear Information System (INIS)
Madni, I.K.; Cazzoli, E.G.; Khatib-Rahbar, M.
1988-07-01
A personal computer-based model, SMART, has been developed that uses an integral approach for calculating early offsite consequences from nuclear reactor accidents. The solution procedure uses simplified meteorology and involves direct analytic integration of air concentration equations over time and position. This is different from the discretization approach currently used in the CRAC2 and MACCS codes. The SMART code is fast-running, thereby providing a valuable tool for sensitivity and uncertainty studies. The code was benchmarked against both MACCS version 1.4 and CRAC2. Results of benchmarking and detailed sensitivity/uncertainty analyses using SMART are presented. 34 refs., 21 figs., 24 tabs
Assessment of hydrogen risk using advanced methodology for lumped parameter code-MELCOR
International Nuclear Information System (INIS)
Duspiva, Jiri; Kujal, Bohumir
2007-01-01
The hydrogen risk is one of the most important containment integrity challenge during a severe accident progression at the VVER type reactors installed at the Czech NPPs. On the basis of recent comprehensive research results the general flame acceleration (FA) and deflagration-to-detonation transition (DDT) criteria were formulated. The main objective of the new methodology developed in the NRI Rez was to prepare an analytical tool for the assessment of the hydrogen risk at the Czech NPPs in the course of a severe accident and also for the design of hydrogen removal system which should be able to prevent or at least minimize the threats of hydrogen detonation in containments. The major idea on which the development of models for the FA and DDT criteria was based is described in OECD state-of-art report (NEA, 2000). The module for the computation of FA criterion (often named σ-criterion) and DDT one (also named λ or Dorofeev criterion) was linked to the MELCOR 1.8.5 model of VVER-1000 containment. The most important feature of new model is that it makes possible to evaluate the both of the criteria for all compartments in the containment continuously during severe accident scenario progression. The containment model, which could be used for such a calculation, has to be very detailed owing to appropriate description of hydrogen distribution. New model was tested by calculation of hydrogen detonation risk in the VVER-1000 containment during severe accident scenario initiated by medium break LOCA. At present two more VVER-1000 severe accident scenarios have been analyzed. The mapping of a hydrogen detonation risk in individual compartments inside containment was performed. The results of analysis confirm that the risk of hydrogen detonation in the great majority of containment compartments during severe accidents is very high if the hydrogen removal system is not installed. (author)
MELCOR simulation of long-term station blackout at Peach Bottom
International Nuclear Information System (INIS)
Madni, I.K.
1990-01-01
This paper presents the results from MELCOR (Version 1.8BC) calculations of the Long-Term Station Blackout Accident Sequence, with failure to depressurize the reactor vessel, at the Peach Bottom (BWR Mark I) plant, and presents comparisons with Source Term Code Package (STCP) calculations of the same sequence. This sequence assumes that batteries are available for six hours following loss of all power to the plant. Following battery failure, the reactor coolant system (RCS) inventory is boiled off through the relief valves by continued decay heat generation. This leads to core uncovery, heatup, clad oxidation, core degradation, relocation, and, eventually, vessel failure at high pressure. STCP has calculated the transient out to 13.5 hours after core uncovery. The results include the timing of key events, pressure and temperature response in the reactor vessel and containment, hydrogen production, and the release of source terms to the environment. 12 refs., 23 figs., 3 tabs
A Bayesian ensemble of sensitivity measures for severe accident modeling
Energy Technology Data Exchange (ETDEWEB)
Hoseyni, Seyed Mohsen [Department of Basic Sciences, East Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Di Maio, Francesco, E-mail: francesco.dimaio@polimi.it [Energy Department, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Vagnoli, Matteo [Energy Department, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Zio, Enrico [Energy Department, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Chair on System Science and Energetic Challenge, Fondation EDF – Electricite de France Ecole Centrale, Paris, and Supelec, Paris (France); Pourgol-Mohammad, Mohammad [Department of Mechanical Engineering, Sahand University of Technology, Tabriz (Iran, Islamic Republic of)
2015-12-15
Highlights: • We propose a sensitivity analysis (SA) method based on a Bayesian updating scheme. • The Bayesian updating schemes adjourns an ensemble of sensitivity measures. • Bootstrap replicates of a severe accident code output are fed to the Bayesian scheme. • The MELCOR code simulates the fission products release of LOFT LP-FP-2 experiment. • Results are compared with those of traditional SA methods. - Abstract: In this work, a sensitivity analysis framework is presented to identify the relevant input variables of a severe accident code, based on an incremental Bayesian ensemble updating method. The proposed methodology entails: (i) the propagation of the uncertainty in the input variables through the severe accident code; (ii) the collection of bootstrap replicates of the input and output of limited number of simulations for building a set of finite mixture models (FMMs) for approximating the probability density function (pdf) of the severe accident code output of the replicates; (iii) for each FMM, the calculation of an ensemble of sensitivity measures (i.e., input saliency, Hellinger distance and Kullback–Leibler divergence) and the updating when a new piece of evidence arrives, by a Bayesian scheme, based on the Bradley–Terry model for ranking the most relevant input model variables. An application is given with respect to a limited number of simulations of a MELCOR severe accident model describing the fission products release in the LP-FP-2 experiment of the loss of fluid test (LOFT) facility, which is a scaled-down facility of a pressurized water reactor (PWR).
Energy Technology Data Exchange (ETDEWEB)
Garcia J, T.; Cardenas V, J., E-mail: tonatiuh.garcia@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan 779, Col. Narvarte, 03020 Ciudad de Mexico (Mexico)
2015-09-15
A methodology was implemented for analysis of uncertainty in simulations of scenarios with RELAP/SCDAP V- 3.4 bi-7 and MELCOR V-2.1 codes, same that are used to perform safety analysis in the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). The uncertainty analysis methodology chosen is a probabilistic method of type Propagation of uncertainty of the input parameters to the departure parameters. Therefore, it began with the selection of the input parameters considered uncertain and are considered of high importance in the scenario for its direct effect on the output interest variable. These parameters were randomly sampled according to intervals of variation or probability distribution functions assigned by expert judgment to generate a set of input files that were run through the simulation code to propagate the uncertainty to the output parameters. Then, through the use or ordered statistical and formula Wilks, was determined that the minimum number of executions required to obtain the uncertainty bands that include a population of 95% at a confidence level of 95% in the results is 93, is important to mention that in this method that number of executions does not depend on the number of selected input parameters. In the implementation routines in Fortran 90 that allowed automate the process to make the uncertainty analysis in transients for RELAP/SCDAP code were generated. In the case of MELCOR code for severe accident analysis, automation was carried out through complement Dakota Uncertainty incorporated into the Snap platform. To test the practical application of this methodology, two analyzes were performed: the first with the simulation of closing transient of the main steam isolation valves using the RELAP/SCDAP code obtaining the uncertainty band of the dome pressure of the vessel; while in the second analysis, the accident simulation of the power total loss (Sbo) was carried out with the Macarol code obtaining the uncertainty band for the
International Nuclear Information System (INIS)
Yoon, Dhongik S; Jo, HangJin; Corradini, Michael L
2017-01-01
Condensation of steam vapor is an important mode of energy removal from the reactor containment. The presence of noncondensable gas complicates the process and makes it difficult to model. MELCOR, one of the more widely used system codes for containment analyses, uses the heat and mass transfer analogy to model condensation heat transfer. To investigate previously reported nodalization-dependence in natural convection flow regime, MELCOR condensation model as well as other models are studied. The nodalization-dependence issue is resolved by using physical length from the actual geometry rather than node size of each control volume as the characteristic length scale for MELCOR containment analyses. At the transition to turbulent natural convection regime, the McAdams correlation for convective heat transfer produces a better prediction compared to the original MELCOR model. The McAdams correlation is implemented in MELCOR and the prediction is validated against a set of experiments on a scaled AP600 containment. The MELCOR with our implemented model produces improved predictions. For steam molar fractions in the gas mixture greater than about 0.58, the predictions are within the uncertainty margin of the measurements. The simulation results still underestimate the heat transfer from the gas-steam mixture, implying that conservative predictions are provided.
Simulation of VANAM M3 test using MELCOR 1.8.3
International Nuclear Information System (INIS)
Cho, Sung Won; Kim, Hee Dong
1996-07-01
A standard problem is defined as a comparison between experimental and analytical results in the field of reactor safety research. The detailed comparison of the data permits conclusions for the reliability and precision of computer simulations of postulated accidents and contributions to the development and improvement of reactor safety computer codes. Following a suggestion of the Federal Republic of Germany, the OECD-CSNI agreed to offer the experiment VANAM M3 at the Battelle Model Containment (BMC), an experiment on thermohydraulics and aerosol behavior in a containment, as International Standard Problem No. 37 (ISP 37). The general objectives of the ISP 37 are to analyse the thermohydraulics of a containment atmosphere and the distribution and settlement of aerosol after a high pressure path with depressurization by pressurizer relief valve discharge. Steam condensation at the aerosol particles(condensation in volume) is enhanced by the hygroscopic properties of the aerosol materials, even in case of limited steam supply. The originally small, low-density NaOH particles are converted to solution droplets by steam condensation, the increasing droplet mass significantly enhancing aerosol depletion by gravity settlement. As a result, higher depletion rate have been obtained for the NaOH aerosol than for the SnO 2 aerosol in M2. The MELCOR code, version 1.8.3, has been used for the simulation of this experiment, and the results are compared with the results of other calculations at GRS. The objectives of this report are to contribute to the efficient use of MELCOR code and understanding of the aerosol behavior. 12 tabs., 19 figs., 11 refs. (Author)
Study of steam condensation at sub-atmospheric pressure: setting a basic research using MELCOR code
Manfredini, A.; Mazzini, M.
2017-11-01
One of the most serious accidents that can occur in the experimental nuclear fusion reactor ITER is the break of one of the headers of the refrigeration system of the first wall of the Tokamak. This results in water-steam mixture discharge in vacuum vessel (VV), with consequent pressurization of this container. To prevent the pressure in the VV exceeds 150 KPa absolute, a system discharges the steam inside a suppression pool, at an absolute pressure of 4.2 kPa. The computer codes used to analyze such incident (eg. RELAP 5 or MELCOR) are not validated experimentally for such conditions. Therefore, we planned a basic research, in order to have experimental data useful to validate the heat transfer correlations used in these codes. After a thorough literature search on this topic, ACTA, in collaboration with the staff of ITER, defined the experimental matrix and performed the design of the experimental apparatus. For the thermal-hydraulic design of the experiments, we executed a series of calculations by MELCOR. This code, however, was used in an unconventional mode, with the development of models suited respectively to low and high steam flow-rate tests. The article concludes with a discussion of the placement of experimental data within the map featuring the phenomenon characteristics, showing the importance of the new knowledge acquired, particularly in the case of chugging.
International Nuclear Information System (INIS)
Dvorzhak, Alla; Mora, Juan C.; Robles, Beatriz
2016-01-01
Potential exposures are those that may occur as a result of unanticipated operational performance or accidents. Potential exposure situations are probabilistic in nature because they depend on uncertain events such as equipment failure, operator errors or external initiators beyond the control of the operator. Consequently, there may exist a range of possible radiological impacts that need to be considered. In this paper a Level 3 Probabilistic Safety Assessment (PSA) for a hypothetical scenario relevant to Innovative Nuclear Energy Systems (INS) was conducted using computer code MACCS (MELCOR Accident Consequence Code Systems). The acceptability of an INS was analyzed taking into account the general requirement that relocation or evacuation measures must not be necessary beyond the site boundary. In addition, deterministic modeling of the accident consequences for the critical meteorological conditions was carried out using the JRODOS decision support system (Real-time On-line Decision Support system for off-site emergency management in Europe). The approach used for dose and risk assessment from potential exposure of accidental releases and their comparison with acceptance criteria are presented. The methodology described can be used as input to the licensing procedure and engineering design considerations to help satisfy relevant health and environmental impact criteria for fission or fusion nuclear installations. - Highlights: • PSA Level-3 based on WinMACCS code is carried out for accidental release. • Family curves of percentiles for radiation exposure doses are constructed. • Risk indicators for potential exposure are defined. • Using of risk acceptance curve criteria is proposed for decision making process.
International Nuclear Information System (INIS)
Jeon, Ho-Jun; Hwang, Seok-Won; Oh, Ji-Yong
2012-01-01
Highlights: ► We develop web-based offsite consequence analysis program based on MACCS II code. ► The program has an automatic processing module to make the main input data. ► It is effective in conducting risk assessments according to extending ILRT intervals. ► Even a beginner can perform offsite consequence analysis with the program. - Abstract: For an offsite consequence analysis, MELCOR Accident Consequence Code System (MACCS) II code is widely used as a tool. In this study, the algorithm of web-based Off-Site Consequence Analysis Program (OSCAP) using the MACCS II code was developed for an integrated leak rate test (ILRT) interval extension and Level 3 probabilistic safety assessment (PSA), and verification and validation (V and V) of the program was performed. The main input data of the MACCS II code are meteorological data, population distribution data and source term data. However, it requires lots of time and efforts to generate the main input data for an offsite consequence analysis using the MACCS II code. For example, the meteorological data are collected from each nuclear power site in real time, but the formats of the raw data collected are different from each other as a site. To reduce efforts and time for risk assessments, the web-based OSCAP has an automatic processing module which converts the format of the raw data collected from each site in Korea to the input data format of the MACCS II code. The program also provides an automatic function of converting the latest population data from Statistics Korea, the National Statistical Office, to the population distribution input data format of the MACCS II code. In case of the source term data, the program includes the release fraction of each source term category resulting from Modular Accident Analysis Program (MAAP) code analysis and the core inventory data from ORIGEN code analysis. These analysis results of each plant in Korea are stored in a database module of the web-based OSCAP, so a
Heat up and potential failure of BWR upper internals during a severe accident
Energy Technology Data Exchange (ETDEWEB)
Robb, Kevin R [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
2015-01-01
In boiling water reactors, the steam dome, steam separators, and dryers above the core are comprised of approximately 100 tons of stainless steel. During a severe accident in which the coolant boils away and exothermic oxidation of zirconium occurs, gases (steam and hydrogen) are superheated in the core region and pass through the upper internals. Historically, the upper internals have been modeled using severe accident codes with relatively simple approximations. The upper internals are typically modeled in MELCOR as two lumped volumes with simplified heat transfer characteristics, with no structural integrity considerations, and with limited ability to oxidize, melt, and relocate. The potential for and the subsequent impact of the upper internals to heat up, oxidize, fail, and relocate during a severe accident was investigated. A higher fidelity representation of the shroud dome, steam separators, and steam driers was developed in MELCOR v1.8.6 by extending the core region upwards. This modeling effort entailed adding 45 additional core cells and control volumes, 98 flow paths, and numerous control functions. The model accounts for the mechanical loading and structural integrity, oxidation, melting, flow area blockage, and relocation of the various components. The results indicate that the upper internals can reach high temperatures during a severe accident; they are predicted to reach a high enough temperature such that they lose their structural integrity and relocate. The additional 100 tons of stainless steel debris influences the subsequent in-vessel and ex-vessel accident progression.
Accident sequences simulated at the Juragua nuclear power plant
International Nuclear Information System (INIS)
Carbajo, J.J.
1998-01-01
Different hypothetical accident sequences have been simulated at Unit 1 of the Juragua nuclear power plant in Cuba, a plant with two VVER-440 V213 units under construction. The computer code MELCOR was employed for these simulations. The sequences simulated are: (1) a design-basis accident (DBA) large loss of coolant accident (LOCA) with the emergency core coolant system (ECCS) on, (2) a station blackout (SBO), (3) a small LOCA (SLOCA) concurrent with SBO, (4) a large LOCA (LLOCA) concurrent with SBO, and (5) a LLOCA concurrent with SBO and with the containment breached at time zero. Timings of important events and source term releases have been calculated for the different sequences analyzed. Under certain weather conditions, the fission products released from the severe accident sequences may travel to southern Florida
Uncertainty and sensitivity analysis in the scenario simulation with RELAP/SCDAP and MELCOR codes
International Nuclear Information System (INIS)
Garcia J, T.; Cardenas V, J.
2015-09-01
A methodology was implemented for analysis of uncertainty in simulations of scenarios with RELAP/SCDAP V- 3.4 bi-7 and MELCOR V-2.1 codes, same that are used to perform safety analysis in the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS). The uncertainty analysis methodology chosen is a probabilistic method of type Propagation of uncertainty of the input parameters to the departure parameters. Therefore, it began with the selection of the input parameters considered uncertain and are considered of high importance in the scenario for its direct effect on the output interest variable. These parameters were randomly sampled according to intervals of variation or probability distribution functions assigned by expert judgment to generate a set of input files that were run through the simulation code to propagate the uncertainty to the output parameters. Then, through the use or ordered statistical and formula Wilks, was determined that the minimum number of executions required to obtain the uncertainty bands that include a population of 95% at a confidence level of 95% in the results is 93, is important to mention that in this method that number of executions does not depend on the number of selected input parameters. In the implementation routines in Fortran 90 that allowed automate the process to make the uncertainty analysis in transients for RELAP/SCDAP code were generated. In the case of MELCOR code for severe accident analysis, automation was carried out through complement Dakota Uncertainty incorporated into the Snap platform. To test the practical application of this methodology, two analyzes were performed: the first with the simulation of closing transient of the main steam isolation valves using the RELAP/SCDAP code obtaining the uncertainty band of the dome pressure of the vessel; while in the second analysis, the accident simulation of the power total loss (Sbo) was carried out with the Macarol code obtaining the uncertainty band for the
Roy, Andrew K; Chevalier, Bernard; Lefèvre, Thierry; Louvard, Yves; Segurado, Ricardo; Sawaya, Fadi; Spaziano, Marco; Neylon, Antoinette; Serruys, Patrick A; Dawkins, Keith D; Kappetein, Arie Pieter; Mohr, Friedrich-Wilhelm; Colombo, Antonio; Feldman, Ted; Morice, Marie-Claude
2017-09-20
The use of multiple geographical sites for randomised cardiovascular trials may lead to important heterogeneity in treatment effects. This study aimed to determine whether treatment effects from different geographical recruitment regions impacted significantly on five-year MACCE rates in the SYNTAX trial. Five-year SYNTAX results (n=1,800) were analysed for geographical variability by site and country for the effect of treatment (CABG vs. PCI) on MACCE rates. Fixed, random, and linear mixed models were used to test clinical covariate effects, such as diabetes, lesion characteristics, and procedural factors. Comparing five-year MACCE rates, the pooled odds ratio (OR) between study sites was 0.58 (95% CI: 0.47-0.71), and countries 0.59 (95% CI: 0.45-0.73). By homogeneity testing, no individual site (X2=93.8, p=0.051) or country differences (X2=25.7, p=0.080) were observed. For random effects models, the intraclass correlation was minimal (ICC site=5.1%, ICC country=1.5%, p<0.001), indicating minimal geographical heterogeneity, with a hazard ratio of 0.70 (95% CI: 0.59-0.83). Baseline risk (smoking, diabetes, PAD) did not influence regional five-year MACCE outcomes (ICC 1.3%-5.2%), nor did revascularisation of the left main vs. three-vessel disease (p=0.241), across site or country subgroups. For CABG patients, the number of arterial (p=0.49) or venous (p=0.38) conduits used also made no difference. Geographic variability has no significant treatment effect on MACCE rates at five years. These findings highlight the generalisability of the five-year outcomes of the SYNTAX study.
International Nuclear Information System (INIS)
Panayotov, Dobromir; Grief, Andrew; Merrill, Brad J.; Humrickhouse, Paul; Trow, Martin; Dillistone, Michael; Murgatroyd, Julian T.; Owen, Simon; Poitevin, Yves; Peers, Karen; Lyons, Alex; Heaton, Adam; Scott, Richard
2016-01-01
Graphical abstract: - Highlights: • Test Blanket Systems (TBS) DEMO breeding blankets (BB) safety demonstration. • Comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena. • Development of accident analysis specifications (AAS) via the use of phenomena identification and ranking tables (PIRT). • PIRT application to identify required physical models for BB accidents analysis, code assessment and selection. • Development of MELCOR and RELAP5 codes TBS models. • Qualification of the models via comparison with finite element calculations, code-tocode comparisons, and sensitivity studies. - Abstract: ‘Fusion for Energy’ (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena while remaining consistent with the approach already applied to ITER accident analyses. The methodology phases are illustrated in the paper by its application to the EU HCPB TBS using both MELCOR and RELAP5 codes.
Energy Technology Data Exchange (ETDEWEB)
Panayotov, Dobromir, E-mail: dobromir.panayotov@f4e.europa.eu [Fusion for Energy (F4E), Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Grief, Andrew [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom); Merrill, Brad J.; Humrickhouse, Paul [Idaho National Laboratory, PO Box 1625, Idaho Falls, ID (United States); Trow, Martin; Dillistone, Michael; Murgatroyd, Julian T.; Owen, Simon [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom); Poitevin, Yves [Fusion for Energy (F4E), Josep Pla, 2, Torres Diagonal Litoral B3, Barcelona E-08019 (Spain); Peers, Karen; Lyons, Alex; Heaton, Adam; Scott, Richard [Amec Foster Wheeler, Booths Park, Chelford Road, Knutsford WA16 8QZ, Cheshire (United Kingdom)
2016-11-01
Graphical abstract: - Highlights: • Test Blanket Systems (TBS) DEMO breeding blankets (BB) safety demonstration. • Comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena. • Development of accident analysis specifications (AAS) via the use of phenomena identification and ranking tables (PIRT). • PIRT application to identify required physical models for BB accidents analysis, code assessment and selection. • Development of MELCOR and RELAP5 codes TBS models. • Qualification of the models via comparison with finite element calculations, code-tocode comparisons, and sensitivity studies. - Abstract: ‘Fusion for Energy’ (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena while remaining consistent with the approach already applied to ITER accident analyses. The methodology phases are illustrated in the paper by its application to the EU HCPB TBS using both MELCOR and RELAP5 codes.
Analysis of the behaviour of the Kozloduy NPP Unit 3 under severe accident conditions
International Nuclear Information System (INIS)
Velev, V.; Saraeva, V.
2004-01-01
The objective of the analysis is to study the behaviour of the Kozloduy NPP Unit 3 under severe accident conditions. The analysis is performed using computer code MELCOR 1.8.4. This report includes a brief description of Unit 3 active core as well as description and comparison of the key events
International Nuclear Information System (INIS)
Zhang Yanzhao; Zhang Fan; Zhao Xinwen; Zheng Yingfeng
2013-01-01
Using MELCOR code, the accident analysis model was established for a ship reactor. The behaviors of radioactive fission products were analyzed in the case of severe accident induced by large break loss of coolant accident coincident with ship blackout. The research mainly focused on the behaviors of release, transport, retention and the final distribution of inert gas and CsI. The results show that 83.12% of inert gas releases from the core, and the most of inert gas exists in the containment. About 83.08% of CsI release from the core, 72.66% of which is detained in the debris and the primary system, and 27.34% releases into the containment. The results can give a reference for the evaluation of cabin dose and nuclear emergency management. (authors)
International Nuclear Information System (INIS)
Bui Thi Hoa; Tran Chi Thanh
2015-01-01
After Fukushima accident and stress test recommended by IAEA for existing reactors, higher safety requirements are enforced upon nuclear power plants during design extension and severe accident conditions. Based on those arguments, Vietnam Government requests a lot of effective safety solutions, in designs proposed for the nuclear power plants in Ninh Thuan province of Vietnam, which can prevent the accident progression toward severe accidents and mitigate severe accident consequences. One of safety requirements is related to delay time of core melt during design extension condition. Especially, if the worst case of accidents occurs, the reactor vessel integrity must be maintained at least 24 hours from the beginning of the accident. With the aim at investigation of Reactor Pressure Vessel (RPV) integrity, in this study, MELCOR 1.8.6 code is used to evaluate the integrity of RPV lower head for VVER-1200/V-491 reactor during a Large Break Loss of Coolant Accident (LBLOCA) in combination with Station Blackout (SBO) event. The study figures out several parameters related to melt down progress such as: rupture position and rupture timing, the amount of hydrogen generated. Availability of the second stage hydro-accumulators (HA2) in the VVER-1200/V-491 is assumed as an additional improvement to delay the timing of core melt as well as to maintain the vessel integrity for long-term. (author)
Benchmarking MELCOR 1.8.2 for ITER Against Recent EVITA Results
Energy Technology Data Exchange (ETDEWEB)
Merrill, Brad J
2007-11-01
A version of MELCOR 1.8.2 modified for use in ITER Preliminary Safety Report analyses was validated against recent data from the EVITA facility located in Cadarache, France. EVITA Test Series 7 was used for this study to verify MELCOR’s ability to predict the pressures, temperatures, cryoplate ice mass, and vaccum vessel (VV) condensate mass for test conditions in EVITA that include injections of steam, nitrogen, and water in to the EVITA VV after the walls had been heated to 165 ºC and the cryoplate had been cooled to -193 ºC. In general, the ability of MELCOR to predict the VV pressure and wall temperatures for the steam only and water only injection tests was very good. Predicted ice layer masses where larger than reported for the EVITA cryoplate, in particular for the steam only injection tests (~40% too high), and the predicted condensate masses were less that measured in EVITA. Both of these descrpancies can be explained by ice porosity. The modified MELCOR 1.8.2 over predicts the EVITA VV pressure for the co-injection tests (e.g., steam plus nitrogen, or water plus nitrogen injections) by almost a factor of two. Based on parametric runs that where made by increasing the predicted cryoplate condensation rate, it is believed that this pressure over prediction is a result of an under predicted cryoplate condensation rate. The particulars of this study are documented in this report as well as conclusions about the impact this study has regarding the use of this verions of MELCOR for consequence analyses for ITER safety reports.
Wang, Jiankai; Wang, Wenjuan; Cai, Hongyi; Du, Binbin; Zhang, Lijuan; Ma, Wen; Hu, Yongguo; Feng, Shifang; Miao, Guoying
2017-12-01
With regards to colon cancer, resistance to 5‑fluorouracil (5‑FU)‑based chemotherapy and cancer stem cells (CSCs) are considered important factors underlying therapy failure. Metastasis‑associated colon cancer 1 (MACC1) has been associated with poor prognosis and the promotion of metastasis within several types of cancer. However, the biological behavior of MACC1 in chemoresistance and CSC‑like properties remains unclear. In the present study, various methods including gene knockdown, gene overexpression, western blotting, quantitative polymerase chain reaction and MTT assay, have been adopted. According to the results of the present study, MACC1 was depleted in two colon cancer cell lines resistant to 5‑FU; subsequently, CSC‑like properties and 5‑FU sensitivity were investigated. Within 5‑FU‑resistant cells, cell death was facilitated by MACC1 knockdown. Furthermore, sphere formation and the expression levels of pluripotent markers, including cluster of differentiation (CD) 44, CD133 and Nanog were reduced due to MACC1 depletion. Additionally, it was indicated that the phosphoinositide 3‑kinase/protein kinase B signaling pathway may be associated with 5‑FU resistance and CSC‑like properties via MACC1.
Wang, Jiankai; Wang, Wenjuan; Cai, Hongyi; Du, Binbin; Zhang, Lijuan; Ma, Wen; Hu, Yongguo; Feng, Shifang; Miao, Guoying
2017-01-01
With regards to colon cancer, resistance to 5-fluorouracil (5-FU)-based chemotherapy and cancer stem cells (CSCs) are considered important factors underlying therapy failure. Metastasis-associated colon cancer 1 (MACC1) has been associated with poor prognosis and the promotion of metastasis within several types of cancer. However, the biological behavior of MACC1 in chemoresistance and CSC-like properties remains unclear. In the present study, various methods including gene knockdown, gene overexpression, western blotting, quantitative polymerase chain reaction and MTT assay, have been adopted. According to the results of the present study, MACC1 was depleted in two colon cancer cell lines resistant to 5-FU; subsequently, CSC-like properties and 5-FU sensitivity were investigated. Within 5-FU-resistant cells, cell death was facilitated by MACC1 knockdown. Furthermore, sphere formation and the expression levels of pluripotent markers, including cluster of differentiation (CD) 44, CD133 and Nanog were reduced due to MACC1 depletion. Additionally, it was indicated that the phosphoinositide 3-kinase/protein kinase B signaling pathway may be associated with 5-FU resistance and CSC-like properties via MACC1. PMID:28990068
International Nuclear Information System (INIS)
Park, Soo Yong; Song, Y. M.; Kim, D. H.; Kim, H. D.
1999-03-01
The purpose of this report are to identify the modelling differences by review phenomenological models related to MCCI, and to investigate modelling uncertainty by performing sensitivity analysis, and finally to identify models to be improved in MELCOR. As the results, the most important uncertain parameter in the MCCI area is the debris stratification/mixing, and heat transfer between molten corium and overlying water pool. MAAP has a very simple and flexible corium-water heat transfer model, which seems to be needed in MELCOR for evaluation of real plants as long as large phenomenological uncertainty still exists. During the corium-concrete interaction, there is a temperature distribution inside basemat concrete. This would affect the amount or timing of gas generation. While MAAP calculates the temperature distribution through nodalization methodology, MELCOR calculates concrete response based on one-dimensional steady-state ablation, with no consideration given to conduction into the concrete or to decomposition in advanced of the ablation front. The code may be inaccurate for analysis of combustible gas generation during MCCI. Thus there is a necessity to improve the concrete decomposition model in MELCOR. (Author). 12 refs., 5 tabs., 42 figs
Accident consequences analysis of the HYLIFE-II inertial fusion energy power plant design
Energy Technology Data Exchange (ETDEWEB)
Reyes, S. E-mail: reyessuarezl@llnl.gov; Latkowski, J.F.; Gomez del Rio, J.; Sanz, J
2001-05-21
Previous studies of the safety and environmental aspects of the HYLIFE-II inertial fusion energy power plant design have used simplistic assumptions in order to estimate radioactivity releases under accident conditions. Conservatisms associated with these traditional analyses can mask the actual behavior of the plant and have revealed the need for more accurate modeling and analysis of accident conditions and radioactivity mobilization mechanisms. In the present work, computer codes traditionally used for magnetic fusion safety analyses (CHEMCON, MELCOR) have been applied for simulating accident conditions in a simple model of the HYLIFE-II IFE design. Here we consider a severe loss of coolant accident (LOCA) in conjunction with simultaneous failures of the beam tubes (providing a pathway for radioactivity release from the vacuum vessel towards the confinement) and of the two barriers surrounding the chamber (inner shielding and confinement building itself). Even though confinement failure would be a very unlikely event it would be needed in order to produce significant off-site doses. CHEMCON code allows calculation of long-term temperature transients in fusion reactor first wall, blanket, and shield structures resulting from decay heating. MELCOR is used to simulate a wide range of physical phenomena including thermal-hydraulics, heat transfer, aerosol physics and fusion product transport and release. The results of these calculations show that the estimated off-site dose is less than 5 mSv (0.5 rem), which is well below the value of 10 mSv (1 rem) given by the DOE Fusion Safety Standards for protection of the public from exposure to radiation during off-normal conditions.
Accident consequences analysis of the HYLIFE-II inertial fusion energy power plant design
Reyes, S.; Latkowski, J. F.; Gomez del Rio, J.; Sanz, J.
2001-05-01
Previous studies of the safety and environmental aspects of the HYLIFE-II inertial fusion energy power plant design have used simplistic assumptions in order to estimate radioactivity releases under accident conditions. Conservatisms associated with these traditional analyses can mask the actual behavior of the plant and have revealed the need for more accurate modeling and analysis of accident conditions and radioactivity mobilization mechanisms. In the present work, computer codes traditionally used for magnetic fusion safety analyses (CHEMCON, MELCOR) have been applied for simulating accident conditions in a simple model of the HYLIFE-II IFE design. Here we consider a severe loss of coolant accident (LOCA) in conjunction with simultaneous failures of the beam tubes (providing a pathway for radioactivity release from the vacuum vessel towards the confinement) and of the two barriers surrounding the chamber (inner shielding and confinement building itself). Even though confinement failure would be a very unlikely event it would be needed in order to produce significant off-site doses. CHEMCON code allows calculation of long-term temperature transients in fusion reactor first wall, blanket, and shield structures resulting from decay heating. MELCOR is used to simulate a wide range of physical phenomena including thermal-hydraulics, heat transfer, aerosol physics and fusion product transport and release. The results of these calculations show that the estimated off-site dose is less than 5 mSv (0.5 rem), which is well below the value of 10 mSv (1 rem) given by the DOE Fusion Safety Standards for protection of the public from exposure to radiation during off-normal conditions.
Energy Technology Data Exchange (ETDEWEB)
Jung, Chang Hyun; Lee, Byung Chul; Huh, Chang Wook; Kim, Doh Young; Kim, Ju Yeul [Seoul National University, Seoul (Korea, Republic of)
1996-07-01
The purpose of this study is to understand the phenomena of the molten core/concrete interaction during the hypothetical severe accident, and to develop the model for heat transfer and physical phenomena in MCCIs. The contents of this study are analysis of mechanism in MCCIs and assessment of heat transfer models, evaluation of model in CORCON code and verification in CORCON using SWISS and SURC Experiments, and 1000 MWe PWR reactor cavity coolability, and establishment a model for prediction of the crust formation and temperature of melt-pool. The properties and flow condition of melt pool covering with the conditions of severe accident are used to evaluate the heat transfer coefficients in each reviewed model. Also, the scope and limitation of each model for application is assessed. A phenomenological analysis is performed with MELCOR 1.8.2 and MELCOR 1.8.3 And its results is compared with corresponding experimental reports of SWISS and SURC experiments. And the calculation is performed to assess the 1000 MWe PWR reactor cavity coolability. To improve the heat transfer model between melt-pool and overlying coolant and analyze the phase change of melt-pool, 2 dimensional governing equations are established using the enthalpy method and computational program is accomplished in this study. The benchmarking calculation is performed and its results are compared to the experiment which has not considered effects of the coolant boiling and the gas injection. Ultimately, the model shall be developed for considering the gas injection effect and coolant boiling effect. 66 refs., 10 tabs., 29 refs. (author)
Quicklook overview of model changes in Melcor 2.2: Rev 6342 to Rev 9496
Energy Technology Data Exchange (ETDEWEB)
Humphries, Larry L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2017-05-01
MELCOR 2.2 is a significant official release of the MELCOR code with many new models and model improvements. This report provides the code user with a quick review and characterization of new models added, changes to existing models, the effect of code changes during this code development cycle (rev 6342 to rev 9496), a preview of validation results with this code version. More detailed information is found in the code Subversion logs as well as the User Guide and Reference Manuals.
The CIEMAT’s forensic analyses of Fukushima accident: Contribution to the BSAF project
Energy Technology Data Exchange (ETDEWEB)
Herranz, L.E.; López, C.; Fontanet, J.; Fernández, E.
2015-07-01
The Fukushima accident is being both a unique opportunity and a huge challenge for severe accident analysis. Through the simulation of the accidents in Units 1 through 3 with MELCOR 2.1, three scenarios have been postulated which outcomes look consistent with data. These analyses indicate that a massive core damage should have happened in Unit 1, with most core molten and located in the containment, whereas Units 2 and 3 core damage is anticipated to be much less; however, there might be differences among these “twin” units. Anyway, in all the units the amount of H2 produced is over 500 kg. This work has been carried out in the frame of the international project for the understanding of the severe accidents occurred at Fukushima, the OECD-BSAF project. (Author)
International Nuclear Information System (INIS)
Mugica R, C. A.; Godinez S, V.
2011-11-01
Considering the events happened since the 11 March of 2011, in Japan, where an earthquake of 9.1 grades Ritcher of intensity and a later tsunami impacted in an important way the operation of a nuclear power plant located in the Fukushima, Japan; damaging and disabling their cooling systems and injection of emergency water due to the total loss of electric power (commonly denominated Station Blackout), is eminent the analysis of this stage type that took to the nuclear power plant to conditions of damage to the core and explosions generation by hydrogen concentrations in the reactor building. In this work an analysis of a stage type station blackout is presented, using the model of the nuclear power plant of Laguna Verde starting of the stationary state. The analysis is carried out using the MELCOR code (Methods for Estimation of Leakages and Consequences of Releases) version 1.8.6 whose purpose is to model the accidents progression for light water reactors. The obtained results are qualitatively similar to the events observed in the Fukushima nuclear power plant even though limitations exist to achieve a precise simulation of the events happened in Japan, such as the information flow of the chronology of the operator actions, as well as of the characteristic design of the power plant, volumes in cavities and rooms, water/cooling inventories, interconnected systems and their own emergency procedures or guides for the administration of severe accidents among others. (Author)
Ethylene production, ACC and MACC content of freesia buds and florets.
Spikman, G.
1988-01-01
Changes in ethylene production, ACC (1-aminocyclopropane-1-carboxylic acid) and MACC (1-(malonylamino)-cyclopropane-1-carboxylic acid) content of buds and florets of detached inflorescences were studied. Most of the ethylene produced by the inflorescences came from small buds at the apex. This
International Nuclear Information System (INIS)
Hidaka, Akihide
2014-01-01
In the process of core cooling at Fukushima Daiichi nuclear power plants accident, large amount of contaminated water was accumulated in the basements of the reactor buildings at Units 1 to 4. The present study estimated the quantities of I-131 and Cs-137 in the water as of late March based on the press-opened data. The estimated ratios of I-131 and Cs-137 quantities to the core inventories are 0.51%, 0.85% at Unit 1, 74%, 38% at Unit 2 and 26%, 18% at Unit 3, respectively. According to the Henry's law, certain fraction of iodine in water could be released to atmosphere due to gas-liquid partition and contribute to increase in the release to environment. A lot of evaluations for I-131 release have been performed so far by severe accident codes such as MELCOR or the reverse estimation with atmospheric dispersion code such as SPEEDI using the monitoring data. The SPEEDI reverse predicted significant release until March 26 while no prediction in MELCOR after March 17. The present study showed that iodine release from accumulated water due to radiolytic conversion from I - to I 2 and gas-liquid partition of I 2 may explain the release between March 17 and 26. This strongly suggests a need for improvement of current MELCOR approach which treats the release only from containment breaks for several days after the core melt. The study also indicates that the release of radioactive iodine from accumulated water in the basements of reactor buildings could become a great concern for the consequence of Fukushima accident. (author)
Energy Technology Data Exchange (ETDEWEB)
Lee, Byung Chul; Hong, Soon Joon; Lee, Jin Yong; Lee, Kyung Jin; Lee, Kuh Hyung [FNC Tech. Co., Seoul (Korea, Republic of)
2008-04-15
Existing MELCOR 1.8.5 model was improved in view of severe accident natural circulation and MELCOR 1.8.6 input model was developed and calculation sheets for detailed MELCOR 1.8.6 model were produced. Effects of natural circulation modeling were found by simulating SBO accident by comparing existing model with detailed model. Major phenomenon and system operations which affect on natural circulation by high temperature and high pressure gas were investigated and representative accident sequences for creep rupture model of RCS pipeline and SG tube were selected.
MACC regional multi-model ensemble simulations of birch pollen dispersion in Europe
Sofiev, M.; Berger, U.; Prank, M.; Vira, J.; Arteta, J.; Belmonte, J.; Bergmann, K.C.; Chéroux, F.; Elbern, H.; Friese, E.; Galan, C.; Gehrig, R.; Khvorostyanov, D.; Kranenburg, R.; Kumar, U.; Marécal, V.; Meleux, F.; Menut, L.; Pessi, A.M.; Robertson, L.; Ritenberga, O.; Rodinkova, V.; Saarto, A.; Segers, A.; Severova, E.; Sauliene, I.; Siljamo, P.; Steensen, B.M.; Teinemaa, E.; Thibaudon, M.; Peuch, V.H.
2015-01-01
This paper presents the first ensemble modelling experiment in relation to birch pollen in Europe. The seven-model European ensemble of MACC-ENS, tested in trial simulations over the flowering season of 2010, was run through the flowering season of 2013. The simulations have been compared with
Development of a Methodology for VHTR Accident Consequence Assessment
Energy Technology Data Exchange (ETDEWEB)
Lee, Joeun; Kim, Jintae; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)
2016-05-15
The substitution of the VHTR for burning fossil fuels conserves these hydrocarbon resources for other uses and eliminates the emissions of greenhouse. In Korea, for these reasons, constructing the VHTR plan for hydrogen production is in progress. In this study, the consequence analysis for the off-site releases of radioactive materials during severe accidents has been performed using the level 3 PRA technology. The offsite consequence analysis for a VHTR using the MACCS code has been performed. Since the passive system such as the RCCS(Reactor Cavity Cooling System) are equipped, the frequency of occurrence of accidents has been evaluated to be very low. For further study, the assessment for characteristic of VHTR safety system and precise quantification of its accident scenarios is expected to conduct more certain consequence analysis. This methodology shown in this study might contribute to enhancing the safety of VHTR design by utilizing the results having far lower effect on the environment than the LWRs.
Energy Technology Data Exchange (ETDEWEB)
Caruso, Gianfranco, E-mail: gianfranco.caruso@uniroma1.it [Sapienza University of Rome – DIAEE, Corso Vittorio Emanuele II, 244, 00186 Roma (Italy); Giannetti, Fabio [Sapienza University of Rome – DIAEE, Corso Vittorio Emanuele II, 244, 00186 Roma (Italy); Porfiri, Maria Teresa [ENEA FUS C.R. Frascati, Via Enrico Fermi, 45, 00044 Frascati, Roma (Italy)
2013-12-15
Highlights: • The CONSEN code for thermal-hydraulic transients in fusion plants is introduced. • A magnet induced confinement bypass accident in ITER has been simulated. • A comparison with previous MELCOR results for the accident is presented. -- Abstract: The CONSEN (CONServation of ENergy) code is a fast running code to simulate thermal-hydraulic transients, specifically developed for fusion reactors. In order to demonstrate CONSEN capabilities, the paper deals with the accident analysis of the magnet induced confinement bypass for ITER design 1996. During a plasma pulse, a poloidal field magnet experiences an over-voltage condition or an electrical insulation fault that results in two intense electrical arcs. It is assumed that this event produces two one square meters ruptures, resulting in a pathway that connects the interior of the vacuum vessel to the cryostat air space room. The rupture results also in a break of a single cooling channel within the wall of the vacuum vessel and a breach of the magnet cooling line, causing the blow down of a steam/water mixture in the vacuum vessel and in the cryostat and the release of 4 K helium into the cryostat. In the meantime, all the magnet coils are discharged through the magnet protection system actuation. This postulated event creates the simultaneous failure of two radioactive confinement barrier and it envelopes all type of smaller LOCAs into the cryostat. Ice formation on the cryogenic walls is also involved. The accident has been simulated with the CONSEN code up to 32 h. The accident evolution and the phenomena involved are discussed in the paper and the results are compared with available results obtained using the MELCOR code.
Test Data for USEPR Severe Accident Code Validation
Energy Technology Data Exchange (ETDEWEB)
J. L. Rempe
2007-05-01
This document identifies data that can be used for assessing various models embodied in severe accident analysis codes. Phenomena considered in this document, which were limited to those anticipated to be of interest in assessing severe accidents in the USEPR developed by AREVA, include: • Fuel Heatup and Melt Progression • Reactor Coolant System (RCS) Thermal Hydraulics • In-Vessel Molten Pool Formation and Heat Transfer • Fuel/Coolant Interactions during Relocation • Debris Heat Loads to the Vessel • Vessel Failure • Molten Core Concrete Interaction (MCCI) and Reactor Cavity Plug Failure • Melt Spreading and Coolability • Hydrogen Control Each section of this report discusses one phenomenon of interest to the USEPR. Within each section, an effort is made to describe the phenomenon and identify what data are available modeling it. As noted in this document, models in US accident analysis codes (MAAP, MELCOR, and SCDAP/RELAP5) differ. Where possible, this report identifies previous assessments that illustrate the impact of modeling differences on predicting various phenomena. Finally, recommendations regarding the status of data available for modeling USEPR severe accident phenomena are summarized.
Thermal-hydraulic and aerosol containment phenomena modelling in ASTEC severe accident computer code
International Nuclear Information System (INIS)
Kljenak, Ivo; Dapper, Maik; Dienstbier, Jiri; Herranz, Luis E.; Koch, Marco K.; Fontanet, Joan
2010-01-01
Transients in containment systems of different scales (Phebus.FP containment, KAEVER vessel, Battelle Model Containment, LACE vessel and VVER-1000 nuclear power plant containment) involving thermal-hydraulic phenomena and aerosol behaviour, were simulated with the computer integral code ASTEC. The results of the simulations in the first four facilities were compared with experimental results, whereas the results of the simulated accident in the VVER-1000 containment were compared to results obtained with the MELCOR code. The main purpose of the simulations was the validation of the CPA module of the ASTEC code. The calculated results support the applicability of the code for predicting in-containment thermal-hydraulic and aerosol phenomena during a severe accident in a nuclear power plant.
International Nuclear Information System (INIS)
Fernandez-Moguel, Leticia
2015-01-01
Highlights: • The PSI air oxidation model has been successfully implemented in MELCOR. • The model treats oxygen as an active species and nitrogen as a catalyst. • The implementation has been assessed against the previous post-test analyses for QUENCH-16. • The pre-oxidation and air phase were consistent when similar modelling options were used. • All code versions were in fair agreement with the experimental data. - Abstract: The PSI air oxidation model has been successfully implemented in the lump parameter code MELCOR. The PSI air oxidation model treats oxygen as an active species and nitrogen as a catalyst that accelerates the oxidation kinetics. The essential feature of the model is the transition from parabolic to linear kinetics. The implementation has been assessed against the previous post-test analyses for the air ingress experiment QUENCH-16 performed with a local version of RELAP5/SCDAPSim3.5. This version contains the PSI air oxidation model. The pre-oxidation and air phase were consistent when similar modelling options were used and all code versions were in fair agreement with the experimental data, showing consistency in the implementation of the model. The PSI air oxidation model will be used in the future for analysis of spent fuel pool uncovery sequences where steam/air mixture is the prototypical environment
Role of BWR MK I secondary containments in severe accident mitigation
International Nuclear Information System (INIS)
Greene, S.R.
1986-01-01
The recent advent of detailed containment analysis codes such as CONTAIN and MELCOR has facilitated the development of the first large-scale, architectural-based BWR secondary containment models. During the past year ORNL has developed detailed, plant-specific models of the Browns Ferry and Peach Bottom secondary containments, and applied these models in a variety of studies designed to evaluate the role and effectiveness of BWR secondary containments in severe accident mitigation. The topology and basis for these models is discussed, together with some of the emerging insights from these studies
Study on confinement function of reactor containment during late phase severe accident
Energy Technology Data Exchange (ETDEWEB)
NONE
2013-08-15
During a severe accident reactor containment integrity is maintained by accident management. However, gas leakage from containment is inevitable after the severe accident. A large amount of hydrogen and rare gases are produced due to core damage or melting. These non-condensable gases cause the containment pressure much higher than atmospheric pressure even after residual heat removal system recovery especially for BWR with smaller containment volume. Besides, iodine confined in water pool is re-evaporated under radiation field. The present study consists of realistic evaluation of fission products source term inside containment, quantitative evaluation of iodine re-evaporation effect and the experimental study of hydrogen treatment in BWR using ammonia production method by catalyst. Activities in fiscal year 2012 are that modification of MELCOR fission product chemical model was done and verified by experimental data, and that effects of CsI on ammonia production rate for Ru catalyst were conducted. (author)
Engebretson, M. J.; Valentic, T. A.; Stehle, R. H.; Hughes, W. J.
2004-05-01
The Magnetometer Array for Cusp and Cleft Studies (MACCS) is a two-dimensional array of eight fluxgate magnetometers that was established in 1992-1993 in the Eastern Canadian Arctic from 75° to over 80° MLAT to study electrodynamic interactions between the solar wind and Earth's magnetosphere and high-latitude ionosphere. A ninth site in Nain, Labrador, extends coverage down to 66° between existing Canadian and Greenland stations. Originally designed as part of NSF's GEM (Geospace Environment Modeling) Program, MACCS has contributed to the study of transients and waves at the magnetospheric boundary and in the near-cusp region as well as to large, cooperative, studies of ionospheric convection and substorm processes. Because of the limitations of existing telephone lines to each site, it has not been possible to economically access MACCS data promptly; instead, each month's collected data is recorded and mailed to the U.S. for processing and eventual posting on a publicly-accessible web site, http://space.augsburg.edu/space. As part of its recently renewed funding, NSF has supported the development of a near-real-time data transport system using the Iridium satellite network, which will be implemented at two MACCS sites in summer 2004. At the core of the new MACCS communications system is the Data Transport Network, software developed with NSF-ITR funding to automate the transfer of scientific data from remote field stations over unreliable, bandwidth-constrained network connections. The system utilizes a store-and-forward architecture based on sending data files as attachments to Usenet messages. This scheme not only isolates the instruments from network outages, but also provides a consistent framework for organizing and accessing multiple data feeds. Client programs are able to subscribe to data feeds to perform tasks such as system health monitoring, data processing, web page updates and e-mail alerts. The MACCS sites will employ the Data Transport Network
Recent Updates to the MELCOR 1.8.2 Code for ITER Applications
Energy Technology Data Exchange (ETDEWEB)
Merrill, Brad J
2007-05-01
This report documents recent changes made to the MELCOR 1.8.2 computer code for application to the International Thermonuclear Experimental Reactor (ITER), as required by ITER Task Agreement ITA 81-18. There are four areas of change documented by this report. The first area is the addition to this code of a model for transporting HTO. The second area is the updating of the material oxidation correlations to match those specified in the ITER Safety Analysis Data List (SADL). The third area replaces a modification to an aerosol tranpsort subroutine that specified the nominal aerosol density internally with one that now allows the user to specify this density through user input. The fourth area corrected an error that existed in an air condensation subroutine of previous versions of this modified MELCOR code. The appendices of this report contain FORTRAN listings of the coding for these modifications.
Recent Updates to the MELCOR 1.8.2 Code for ITER Applications
Energy Technology Data Exchange (ETDEWEB)
Merrill, Brad J
2007-04-01
This report documents recent changes made to the MELCOR 1.8.2 computer code for application to the International Thermonuclear Experimental Reactor (ITER), as required by ITER Task Agreement ITA 81-18. There are four areas of change documented by this report. The first area is the addition to this code of a model for transporting HTO. The second area is the updating of the material oxidation correlations to match those specified in the ITER Safety Analysis Data List (SADL). The third area replaces a modification to an aerosol tranpsort subroutine that specified the nominal aerosol density internally with one that now allows the user to specify this density through user input. The fourth area corrected an error that existed in an air condensation subroutine of previous versions of this modified MELCOR code. The appendices of this report contain FORTRAN listings of the coding for these modifications.
Energy Technology Data Exchange (ETDEWEB)
Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina
2017-02-15
Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.
KINS Research Activities on the iodine behavior in containment during a severe accident
Energy Technology Data Exchange (ETDEWEB)
Kim, Hanchul; Kim, Dosam [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Oh, Jaeyong; Yun, Jongil [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Cho, Songwon [Korea Radiation Technology Institute, Daejeon (Korea, Republic of)
2012-03-15
Iodine is a major contributor to the potential health risk for the public following a severe accident from a nuclear power plant. Volatile iodine and organic iodides can be generated from the containment sump through various kinds of reactions and be released to the environment. This iodine behavior has been an important topic for the international research programs run by the OECD/NEA and EU-SARNET2. Korea Institute of Nuclear Safety (KINS) also has joined ISTP-EPICUR (Experimental Program on Iodine Chemistry under Radiation) and OECD-BIP (Behavior of Iodine Project). In the course of researching this issue with these experimental programs, a simple iodine model, RAIM, has been developed and coupled with the MELCOR code for radiological consequence analysis. This methodology is likely to provide a technical basis for developing the regulatory requirements concerning a severe accident including accident source term, which is one of urgent domestic needs.
Severe accident recriticality analyses (SARA)
Energy Technology Data Exchange (ETDEWEB)
Frid, W. E-mail: wiktor.frid@ski.se; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Nilsson, L.; Puska, E.K.; Sjoevall, H
2001-11-01
Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies, the following issues have been investigated in the SARA project: (1) the energy deposition in the fuel during super-prompt power burst; (2) the quasi steady-state reactor power following the initial power burst; and (3) containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality--both super-prompt power bursts and quasi steady-state power generation--for the range of parameters studied, i.e. with core uncovering and heat-up to maximum core temperatures of approximately 1800 K, and water flow rates of 45-2000 kg s{sup -1} injected into the downcomer. Since recriticality takes place in a small fraction of the core, the power densities are high, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g{sup -1}, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s{sup -1}. In most cases, however, the predicted energy deposition was smaller, below the regulatory limits for fuel failure, but close to or above recently observed thresholds for fragmentation and dispersion of high burn-up fuel. The highest calculated
Severe accident recriticality analyses (SARA)
International Nuclear Information System (INIS)
Frid, W.; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Nilsson, L.; Puska, E.K.; Sjoevall, H.
2001-01-01
Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies, the following issues have been investigated in the SARA project: (1) the energy deposition in the fuel during super-prompt power burst; (2) the quasi steady-state reactor power following the initial power burst; and (3) containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality--both super-prompt power bursts and quasi steady-state power generation--for the range of parameters studied, i.e. with core uncovering and heat-up to maximum core temperatures of approximately 1800 K, and water flow rates of 45-2000 kg s -1 injected into the downcomer. Since recriticality takes place in a small fraction of the core, the power densities are high, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g -1 , was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s -1 . In most cases, however, the predicted energy deposition was smaller, below the regulatory limits for fuel failure, but close to or above recently observed thresholds for fragmentation and dispersion of high burn-up fuel. The highest calculated quasi steady
Energy Technology Data Exchange (ETDEWEB)
Lin, Hao-Tzu [Institute of Nuclear Energy Research, Taoyuan, Taiwan (China). Research Atomic Energy Council; Li, Wan-Yun; Wang, Jong-Rong; Tseng, Yung-Shin; Chen, Hsiung-Chih; Shih, Chunkuan; Chen, Shao-Wen [National Tsing Hua Univ., HsinChu, Taiwan (China). Inst. of Nuclear Engineering and Science
2017-03-15
Chinshan nuclear power plant (NPP), a BWR/4 plant, is the first NPP in Taiwan. After Fukushima NPP disaster occurred, there is more concern for the safety of NPPs in Taiwan. Therefore, in order to estimate the safety of Chinshan NPP spent fuel pool (SFP), by using TRACE, MELCOR, CFD, and FRAPTRAN codes, INER (Institute of Nuclear Energy Research, Atomic Energy Council, R.O.C.) performed the safety analysis of Chinshan NPP SFP. There were two main steps in this research. The first step was the establishment of Chinshan NPP SFP models. And the transient analysis under the SFP cooling system failure condition (Fukushima-like accident) was performed. In addition, the sensitive study of the time point for water spray was also performed. The next step was the fuel rod performance analysis by using FRAPTRAN and TRACE's results. Finally, the animation model of Chinshan NPP SFP was presented by using the animation function of SNAP with MELCOR analysis results.
International Nuclear Information System (INIS)
Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina
2017-02-01
Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.
Simulation of international standard problem no. 44 open tests using Melcor computer code
International Nuclear Information System (INIS)
Song, Y.M.; Cho, S.W.
2001-01-01
MELCOR 1.8.4 code has been employed to simulate the KAEVER test series of K123/K148/K186/K188 that were proposed as open experiments of International Standard Problem No.44 by OECD-CSNI. The main purpose of this study is to evaluate the accuracy of the MELCOR aerosol model which calculates the aerosol distribution and settlement in a containment. For this, thermal hydraulic conditions are simulated first for the whole test period and then the behavior of hygroscopic CsOH/CsI and unsoluble Ag aerosols, which are predominant activity carriers in a release into the containment, is compared between the experimental results and the code predictions. The calculation results of vessel atmospheric concentration show a good simulation for dry aerosol but show large difference for wet aerosol due to a data mismatch in vessel humidity and the hygroscopicity. (authors)
Development of GUI systems for the MIDAS code
International Nuclear Information System (INIS)
Kim, K.R.; Park, S.H.; Kim, D.H.
2004-01-01
MIDAS is being developed at KAERI based on MELCOR as an integrated severe accident analysis code with existing model modification and new model addition. MIDAS was restructured to avoid the pointer based variable referencing style of MELCOR, and enhanced the memory effectiveness using the dynamic allocation method of Fortran 90. This paper describes recent activities of developing the GUI environments for MIDAS code at KAERI. Up to now, we have developed the four PC-based subsystems, which are IEDIT, IPLOT, SATS and HyperKAMG. IEDIT is an input management system that can read MELCOR input files and display its information in the Window panels. Users can modify each item in the panel and the input file will be modified according to that changes. IPLOT is a simple plotting system that can draw MIDAS plot variables trend graphs. SATS is developed as a severe accident training simulator that can display nuclear plant behavior graphically. Moreover SATS provides several controllable pumps and valves which appeared in the severe accidence. Together with SATS and the online severe accident guidance HyperKAMG, combined properly, severe accident mitigation scenarios could be presented graphically and dramatically without any change of MELCOR inputs. GUI development as a part of a severe accident management program package, MIDAS. (author)
GAMMA-FR and MELCOR Validation using HCS Heat Exchanger Break Accident
International Nuclear Information System (INIS)
Jin, Hyung Gon; Hong, Yun Jeong; Cho, Seung Yon
2016-01-01
To confirm the HCCR-TBS integrity, enveloped cases from the conceivable events were evaluated and demonstrated compliance with the General Safety Objectives of ITER. In this analysis, amount of discharged helium is the key parameter to examine total tritium ingress to CCWS-1. In this regard, radiation heat transfer and temperature distribution along the pipes did not take account. Due to the same reason, flow network inside of TBM is simplified as one fluid volume (FB1300). In principle, transient of this accident is similar to LOHSA, therefore, TBM temperature is expected to be cool down by passive cooling and isolation valves avoid CCWS-1 pressure build-up during the accident. With relief valve, pressure of CCWS-1 is under 0.43 MPa during LOCA happens. (CCWS-1 max. design pressure: 1MPa). On the other hand, primary concern is tritium concentration increase in CCWS-1 because of tritium contents in HCS coolant. The important point is that CCWS-1 is an ESP device and its ESP level should be confirmed when operating with HCCR-TBS as well. Key parameters, which govern this transient, are relief valve operation, nitrogen in the pressurizer and flow area of the ruptured channels. Relief valve in CCWS-1 pressurizer opens at 0.41 MPa and closes 0.39 MPa, therefore, CCWS-1 pressure is impossible to exceed 0.41 MPa globally. As a comparison, calculation was conducted against CCWS-1 with relief valve (with RV) and without relief valve (without RV)
Overview of severe accident research at JAERI
International Nuclear Information System (INIS)
Sugimoto, Jun
1999-01-01
Severe accident research at JAERI aims at the confirmation of the safety margin, the quantification of the associated risk, and the evaluation of the effectiveness of the accident management measures of the nuclear power reactors, in accordance with the government five-year nuclear safety research program. JAERI has been conducting a wide range of severe accident research activities both in experiment and analysis, such as melt coolant interactions, fission product behaviors in coolant system, containment integrity and assessment of accident management measures. Molten core/coolant interaction and in-vessel molten coolability have been investigated in ALPHA Program. MUSE experiments in ALPHA Program has been conducted for the precise energy measurement due to steam explosion in melt jet and stratified geometries. In VEGA Program, which aims at FP release from irradiated fuels at high temperature and high pressure under various atmospheric conditions, the facility construction is almost completed. In WIND Program the revaporization of aerosols due to decay heating and also the integrity of the piping from this heat source are being investigated. Code development activities are in progress for an integrated source term analysis with THALES, fission product behaviors with ART, steam explosion with JASMINE, and in-vessel debris behaviors with CAMP. The experimental analyses and reactor application have made progress by participating international standard problem and code comparison exercises, along with the use of introduced codes, such as SCDAP/RELAP5 and MELCOR. The outcome of the severe accident research will be utilized for the evaluation of more reliable severe accident scenarios, detailed implementation of the accident management measures, and also for the future reactor development, basically through the sophisticated use of verified analytical tools. (author)
Analysis of containment pressure and temperature changes following loss of coolant accident (LOCA)
International Nuclear Information System (INIS)
Nguyen Van Thai; Kieu Ngoc Dung
2015-01-01
This paper present a preliminary thermal-hydraulics analysis of AP1000 containment following loss of coolant accident events such as double-end cold line break (DECLB) or main steam line break (MSLB) using MELCOR code. A break of this type will produce a rapid depressurization of the reactor pressure vessel (primary system) and release initially high pressure water into the containment followed by a much smaller release of highly superheated steam. The high pressure liquid water will flash and rapidly pressurize the containment building. The performance of passive containment cooling system for steam removal by condensation on large steel containment structure is a major contributing process, controlling the pressure and temperature maximum reached during the accident event. The results are analyzed, discussed and compared with the similar work done by Sandia National Laboratories. (author)
Perspectives on phenomenology and simulation of severe accident in light water reactors
International Nuclear Information System (INIS)
Sugimoto, Jun
2014-01-01
Severe accident phenomena in light water reactors (LWRs) are generally characterized by their physically and chemically complex processes involved with high temperature core melt, multi-component and multi-phase flows, transport of radioactive materials and sometimes highly non-equilibrium state. Severe accident phenomenology is usually categorized into four phases; (1) fuel degradation, (2) in-vessel phenomena, (3) ex-vessel phenomena and (4) fission product release and transport. Among these, ex-vessel phenomena consist of five subcategories; 1) direct containment heating, 2) fuel coolant interaction (steam explosion), 3) molten core concrete interaction, 4) hydrogen behaviour and control and 5) containment failure/leakage. In the field of simulation of severe accident, severe accident analytical codes have been developed in the United States, EU and Japan, such as MAAP, MELCOR, ASTEC, THALES and SAMPSON. Many different kinds of analytical codes for the specific severe accident phenomena have also been developed worldwide. After the accident at Fukushima Daiichi Nuclear Power Station, review of severe accident research issues has been conducted and several issues are reconsidered, such as effects of BWR core degradation behaviors, sea water injection, pool scrubbing under rapid depressurization, containment failure/leakage and re-criticality. Some new experimental and analytical efforts have been started after the Fukushima accident. The present paper describes the perspectives on phenomenology and simulation of severe accident in LWRs, with the emphasis of insights obtained in the review of Fukushima accident. (author)
International Nuclear Information System (INIS)
Panayotov, Dobromir; Poitevin, Yves; Grief, Andrew; Trow, Martin; Dillistone, Michael
2016-01-01
'Fusion for Energy' (F4E) is designing, developing, and implementing the European Helium-Cooled Lead-Lithium (HCLL) and Helium-Cooled Pebble-Bed (HCPB) Test Blanket Systems (TBSs) for ITER (Nuclear Facility INB-174). Safety demonstration is an essential element for the integration of these TBSs into ITER and accident analysis is one of its critical components. A systematic approach to accident analysis has been developed under the F4E contract on TBS safety analyses. F4E technical requirements, together with Amec Foster Wheeler and INL efforts, have resulted in a comprehensive methodology for fusion breeding blanket accident analysis that addresses the specificity of the breeding blanket designs, materials, and phenomena while remaining consistent with the approach already applied to ITER accident analyses. Furthermore, the methodology phases are illustrated in the paper by its application to the EU HCLL TBS using both MELCOR and RELAP5 codes.
Evaluation of High-Pressure RCS Natural Circulations Under Severe Accident Conditions
International Nuclear Information System (INIS)
Lee, Byung Chul; Bang, Young Suk; Suh, Nam Duk
2006-01-01
Since TMI-2 accident, the occurrence of severe accident natural circulations inside RCS during entire in-vessel core melt progressions before the reactor vessel breach had been emphasized and tried to clarify its thermal-hydraulic characteristics. As one of consolidated outcomes of these efforts, sophisticated models have been presented to explain the effects of a variety of engineering and phenomenological factors involved during severe accident mitigation on the integrity of RCS pressure boundaries, i.e. reactor pressure vessel(RPV), RCS coolant pipe and steam generator tubes. In general, natural circulation occurs due to density differences, which for single phase flow, is typically generated by temperature differences. Three natural circulation flows can be formed during severe accidents: in-vessel, hot leg countercurrent flow and flow through the coolant loops. Each of these flows may be present during high-pressure transients such as station blackout (SBO) and total loss of feedwater (TLOFW). As a part of research works in order to contribute on the completeness of severe accident management guidance (SAMG) in domestic plants by quantitatively assessing the RCS natural circulations on its integrity, this study presents basic approach for this work and some preliminary results of these efforts with development of appropriately detailed RCS model using MELCOR computer code
Energy Technology Data Exchange (ETDEWEB)
Herranz, L.E.; Vela-Garcia, M.; Fontanet, J. [Unit of Nuclear Safety Research, CIEMAT, Madrid (Spain)
2007-07-01
One of the areas of top interest in the arena of severe accidents to get an accurate prediction of Source Term is Iodine Chemistry. In this paper an assessment of the current capability of MELCOR and ASTEC to predict iodine chemistry within containment in case of a postulated severe accident has been carried out. The experiments FPT1 and FPT2 of the PHEBUS-FP project have been used for comparisons, since they were carried out under rather different containment conditions during the chemistry phase (subcooled vs. saturated sump or acid vs. alkaline pH), which makes them very suitable to assess the current modeling capability of in-containment iodine chemistry models. The results obtained indicate that, even though, both integral codes have specific areas related to iodine chemistry that should be further developed and that their approach to the matter is drastically different, at present ASTEC-IODE allows for a more comprehensive simulation of the containment iodine chemistry. More importantly, lack of maturity of these codes would potentially maximize the so-called user-effect, so that it would be highly recommendable to perform sensitivity studies around iodine chemistry aspects when calculating Source Term scenarios. Key aspects needed of further research are: gaseous iodine chemistry (absent in MELCOR), organic iodine chemistry and adsorption/desorption on/from containment surfaces. (authors)
Study On Safety Analysis Of PWR Reactor Core In Transient And Severe Accident Conditions
International Nuclear Information System (INIS)
Le Dai Dien; Hoang Minh Giang; Nguyen Thi Thanh Thuy; Nguyen Thi Tu Oanh; Le Thi Thu; Pham Tuan Nam; Tran Van Trung; Le Van Hong; Vo Thi Huong
2014-01-01
The cooperation research project on the Study on Safety Analysis of PWR Reactor Core in Transient and Severe Accident Conditions between Institute for Nuclear Science and Technology (INST), VINATOM and Korean Atomic Energy Research Institute (KAERI), Korea has been setup to strengthen the capability of researches in nuclear safety not only in mastering the methods and computer codes, but also in qualifying of young researchers in the field of nuclear safety analysis. Through the studies on the using of thermal hydraulics computer codes like RELAP5, COBRA, FLUENT and CFX the thermal hydraulics research group has made progress in the research including problems for safety analysis of APR1400 nuclear reactor, PIRT methodologies and sub-channel analysis. The study of severe accidents has been started by using MELCOR in collaboration with KAERI experts and the training on the fundamental phenomena occurred in postulated severe accident. For Vietnam side, VVER-1000 nuclear reactor is also intensively studied. The design of core catcher, reactor containment and severe accident management are the main tasks concerning VVER technology. The research results are presented in the 9 th National Conference on Mechanics, Ha Noi, December 8-9, 2012, the 10 th National Conference on Nuclear Science and Technology, Vung Tau, August 14-15, 2013, as well as published in the journal of Nuclear Science and Technology, Vietnam Nuclear Society and other journals. The skills and experience from using computer codes like RELAP5, MELCOR, ANSYS and COBRA in nuclear safety analysis are improved with the nuclear reactors APR1400, Westinghouse 4 loop PWR and especially the VVER-1000 chosen for the specific studies. During cooperation research project, man power and capability of Nuclear Safety center of INST have been strengthen. Three masters were graduated, 2 researchers are engaging in Ph.D course at Hanoi University of Science and Technology and University of Science and Technology, Korea
Severe Accident Recriticality Analyses (SARA)
Energy Technology Data Exchange (ETDEWEB)
Frid, W. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Hoejerup, F. [Risoe National Lab. (Denmark); Lindholm, I.; Miettinen, J.; Puska, E.K. [VTT Energy, Helsinki (Finland); Nilsson, Lars [Studsvik Eco and Safety AB, Nykoeping (Sweden); Sjoevall, H. [Teoliisuuden Voima Oy (Finland)
1999-11-01
Recriticality in a BWR has been studied for a total loss of electric power accident scenario. In a BWR, the B{sub 4}C control rods would melt and relocate from the core before the fuel during core uncovery and heat-up. If electric power returns during this time-window unborated water from ECCS systems will start to reflood the partly control rod free core. Recriticality might take place for which the only mitigating mechanisms are the Doppler effect and void formation. In order to assess the impact of recriticality on reactor safety, including accident management measures, the following issues have been investigated in the SARA project: 1. the energy deposition in the fuel during super-prompt power burst, 2. the quasi steady-state reactor power following the initial power burst and 3. containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core state initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality - both superprompt power bursts and quasi steady-state power generation - for the studied range of parameters, i. e. with core uncovery and heat-up to maximum core temperatures around 1800 K and water flow rates of 45 kg/s to 2000 kg/s injected into the downcomer. Since the recriticality takes place in a small fraction of the core the power densities are high which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal/g, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding
Severe Accident Recriticality Analyses (SARA)
International Nuclear Information System (INIS)
Frid, W.; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Puska, E.K.; Nilsson, Lars; Sjoevall, H.
1999-11-01
Recriticality in a BWR has been studied for a total loss of electric power accident scenario. In a BWR, the B 4 C control rods would melt and relocate from the core before the fuel during core uncovery and heat-up. If electric power returns during this time-window unborated water from ECCS systems will start to reflood the partly control rod free core. Recriticality might take place for which the only mitigating mechanisms are the Doppler effect and void formation. In order to assess the impact of recriticality on reactor safety, including accident management measures, the following issues have been investigated in the SARA project: 1. the energy deposition in the fuel during super-prompt power burst, 2. the quasi steady-state reactor power following the initial power burst and 3. containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core state initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality - both superprompt power bursts and quasi steady-state power generation - for the studied range of parameters, i. e. with core uncovery and heat-up to maximum core temperatures around 1800 K and water flow rates of 45 kg/s to 2000 kg/s injected into the downcomer. Since the recriticality takes place in a small fraction of the core the power densities are high which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal/g, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding
Update of the ITER MELCOR model for the validation of the Cryostat design
Energy Technology Data Exchange (ETDEWEB)
Martínez, M.; Labarta, C.; Terrón, S.; Izquierdo, J.; Perlado, J.M.
2015-07-01
Some transients can compromise the vacuum in the Cryostat of ITER and cause significant loads. A MELCOR model has been updated in order to assess this loads. Transients have been run with this model and its result will be used in the mechanical assessment of the cryostat. (Author)
International Nuclear Information System (INIS)
Lee, Byung Chul; Kim, Ju Yeul; Chung, Chang Hyun; Park, Soo Yong
1996-01-01
The analysis for the coolability of the reactor cavity in typical Korean 1000 MWe Nuclear Unit under severe accidents is performed using MELCOR 1.8.3 code. The key parameters molten core-concrete interaction (MCCI) such as melt temperature, concrete ablation history and gas generation are investigated. Total twenty cases are selected according to ejected debris fraction and coolant mass. The ablation rate of concrete decreases as mass of the melt decreases and coolant mass increases. Heat loss from molten pool to coolant is comparable to total decay heat, so concrete ablation is delayed until water is absent and crust begins to remove. Also, overpressurization due to non-condensible gases generated during corium and concrete interacts can cause to additional risk of containment failure. It is concluded that flooded reactor cavity condition is very important to minimize the cavity ablation and pressure load by non-condensible gases on containment
Integrated hydrogen control solutions for severe accidents using passive autocatalytic recombiners
International Nuclear Information System (INIS)
Bauer, M.; Tietsch, W.; Sabate Farnos, R.
2012-01-01
In a severe accident or a beyond-design-basis-accident, the reaction of water with zirconium alloy cladding, radiolysis of water, corium-concrete reactions and other corrosion phenomena generate hydrogen (H2). The detonation of this H2 in containment or in auxiliary buildings can result in damage to structures or loss of containment integrity. Identifying the generation and special distribution of hydrogen and controlling its concentration with Passive Autocatalytic Recombiners (PARs) solves this concern. Westinghouse's approach for hydrogen management starts by defining the quantities and transport/distribution of H 2 in-containment and out of containment with analysis tools such as MAAP, MELCOR, GASFLOW or FATE. Based on the results of these analyses, an optimized H2 Control Strategy is proposed in terms of number and location of PARs, and efficient integration with other H 2 management devices like e.g. existing igniters, H 2 monitors, etc.
International Nuclear Information System (INIS)
Sun, Xiaohui; Cao, Xinrong; Shi, Xingwei; Yan, Jin
2017-01-01
Highlights: • Characteristics of aerosol distribution in containment are obtained. • Aerosol removal by natural processes is comparative studied by two methods. • Traditional rapid assessment method is conservative and can be applied in AP1000 reactor. - Abstract: Focusing on aerosol removal by naturally occurring processes in containment in severe accident for AP1000, integral severe accident code MELCOR and rapid assessment method mentioned in NUREG/CR-6189 are utilized to study aerosol removal by natural processes, respectively. Three typical severe accidents, induced by large break loss of coolant accident (LBLOCA), small break loss of coolant accident (SBLOCA) and steam generator tube rupture (SGTR), respectively, are selected for the study. The results obtained by two methods were further compared in the following several aspects: efficiency of aerosol removal by natural processes, peak time of aerosol suspended in containment atmosphere, peak amount of aerosol suspended in containment atmosphere, time when aerosol removal efficiency by natural processes is up to 99.9%. It was further concluded that results obtained by rapid assessment with shorter calculation process are more conservative. The analysis results provide reference to assessment method selection of severe accident source term for AP1000 nuclear emergency.
International Nuclear Information System (INIS)
Bogorad, V.; Slepchenko, O.; Kyrylenko, Y.
2016-01-01
The paper focuses on application of the ALARA principle to minimize the collective doses (both for NPP personnel and the public) related to admission of personnel to the containment for accident management activities and depending on operation of ventilation systems. Results from assessment of radiation consequences are applied to a small - break LOCA with failure of LPIS at VVER - 1000 reactors. The public doses are evaluated using up - to - date RODOS, MACCS and HotSpot software for assessment of radiation consequences. The personnel doses are evaluated with MicroShield and InterRAS codes. The time function and optimal value of the collective dose are defined. The developed approach can be applied for minimization of the collective dose for optimization of accident management strategies at NPPs
International Nuclear Information System (INIS)
Martinez F, C.; Araiza M, E.
2003-01-01
The objective of this work is to evaluate the effects on the population health border to a nuclear power station and to estimate the consequences caused by the liberation of radioactive material using the MACCS code (MELCOR Accident Consequence Code System), developed to evaluate the risks for have a severe accident in nuclear plants and to calculate the consequences outside of the one place. The code presents the radiological consequences in form of a complementary accumulative distribution function (CCDF). Graphics of the one total fatal cancerous and immediate damages against the occurrence probability, for a known term source and with the meteorological data of the Laguna Verde power station in one period from 1989 to 1998 and without considering measures of protection to the population. When analyzing these results an it is observed similar behavior in every year for the specific cases of radius of 0 to 16 Km and of 0 to 70 Km. The main parameters required by the one code in the enter file is the Inventory of radioactive products present to the beginning of the accident, the atmospheric source term, the one number of liberated feathers, its heights and temperatures, the meteorological data of the site, the distribution of the border population to the same one and the soil type. It is concluded that it is necessary an additional estimation that consider population's census and current characteristics of the area for to be able to observe the consequences variation. (Author)
Energy Technology Data Exchange (ETDEWEB)
Martinez F, C.; Araiza M, E. [IPN-ESFM, 07738 Mexico D.F. (Mexico)] e-mail: carimtz@hotmail.com
2003-07-01
The objective of this work is to evaluate the effects on the population health border to a nuclear power station and to estimate the consequences caused by the liberation of radioactive material using the MACCS code (MELCOR Accident Consequence Code System), developed to evaluate the risks for have a severe accident in nuclear plants and to calculate the consequences outside of the one place. The code presents the radiological consequences in form of a complementary accumulative distribution function (CCDF). Graphics of the one total fatal cancerous and immediate damages against the occurrence probability, for a known term source and with the meteorological data of the Laguna Verde power station in one period from 1989 to 1998 and without considering measures of protection to the population. When analyzing these results an it is observed similar behavior in every year for the specific cases of radius of 0 to 16 Km and of 0 to 70 Km. The main parameters required by the one code in the enter file is the Inventory of radioactive products present to the beginning of the accident, the atmospheric source term, the one number of liberated feathers, its heights and temperatures, the meteorological data of the site, the distribution of the border population to the same one and the soil type. It is concluded that it is necessary an additional estimation that consider population's census and current characteristics of the area for to be able to observe the consequences variation. (Author)
International Nuclear Information System (INIS)
Harper, F.T.; Young, M.L.; Miller, L.A.; Hora, S.C.; Lui, C.H.; Goossens, L.H.J.; Cooke, R.M.; Paesler-Sauer, J.; Helton, J.C.
1995-01-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The ultimate objective of the joint effort was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. Experts developed their distributions independently. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. To validate the distributions generated for the dispersion code input variables, samples from the distributions and propagated through the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the first of a three-volume document describing the project
Energy Technology Data Exchange (ETDEWEB)
Moon, Sung Bo; Bang, In Cheol [Ulsan National Institute of Science and Technology, Ulsan (Korea, Republic of)
2014-10-15
Previous researches have been analyzed risk assessments of fusion reactors that are dangerous in the severe accidents where the radioactive material released from confinement building to the environment. To simulate the severe accidents in ITER, a number of thermal hydraulics simulation codes were used. Before construction of the fusion reactor, to obtain ITER license about safety issue, MELCOR is chosen as one of the several codes to be used to perform ITER safety analyses. Qualification of the simulation code is to simulate the cooling system in ITER, the transport of radionuclides during design basis accidents (DBAs) including beyond design basis accidents (BDBAs). MELCOR is fully integrated code that models the accidents in Light Water Reactor (LWR). To analyze the accidents in ITER, MELCOR 1.8.2 version is modified. In the nuclear fusion system, the amount of released radioactive material is criteria for safety permission. Tritium (or tritiated water: HTO) and radioactive dust aerosol are the source of radioactive leakage. In the Generic Site Safety Report (GSSR) for the ITER plant, Table I lists the release guidelines for tritium and activation products for normal operation, incidents and accidents. Several accident analyses have been studied to know how much radioactive material could be released from the severe accidents. In the present work, The MELCOR input deck of large First Wall (FW) coolant leak (pipe break) is used to study and radioactive material leakage thorough bypass accident are studied to follow up the ITER safety analysis. In this research, follow-up study of the in-vessel inboard/inboard-outboard FW pipe break was analyzed to investigate the amount of leakage of radioactive aerosol. All of the accident cases released the lower amount of radioactive aerosol compared to the IAEA guide lines. In addition, the OBB pipe break made lower HTO aerosol leakage because of condensation of HTO and adsorption between coolant and aerosol.
International Nuclear Information System (INIS)
Harmony, S.C.; Boyack, B.E.
1995-04-01
VELCOR is an integrated, engineering-level computer code that models the progression of severe accidents in light water reactor (LWR) nuclear power plants. The entire spectrum of severe accident phenomena, including reactor coolant system and containment thermal-hydraulic response, core heatup, degradation and relocation, and fission product release and transport is treated in MELCOR in a unified framework for both boiling water reactors (BWRs) and pressurized water reactors (PWRs). Its current uses include the estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. Independent assessment efforts have been successfully completed by the US and international MELCOR user communities. Most of these independent assessment efforts have been conducted to support the needs and fulfill the requirements of the individual user organizations. The resources required to perform an extensive set of model and integral code assessments are large. A prudent approach to fostering code development and maturation is to coordinate the individual assessment efforts of the MELCOR user community. While retaining individual control over assessment resources, each organization using the MELCOR code could work with the other users to broaden assessment coverage and minimize duplication. In recognition of these considerations, the US Nuclear Regulatory Commission (US NRC) has initiated the MELCOR Cooperative Assessment Program (MCAP), a vehicle for coordinating and standardizing the assessment practices of the various MELCOR users. In addition, the user community will have a forum to better communicate lessons learned regarding MELCOR applications, capabilities, and user guidelines and limitations and to provide a user community perspective on code development needs and priorities. This second Annual Report builds on the foundation laid with the first Annual Report
MELCOR aerosol transport module modification for NSSR-1
International Nuclear Information System (INIS)
Merrill, B.J.; Hagrman, D.L.
1996-03-01
This report describes modifications of the MELCOR computer code aerosol transport module that will increase the accuracy of calculations for safety analysis of the International Thermonuclear Experimental Reactor (ITER). The modifications generalize aerosol deposition models to consider gases other than air, add specialized models for aerosol deposition during high speed gas flows in ducts, and add models for resuspension of aerosols that are entrained in coolants when these coolants flash. Particular attention has been paid to the adhesion of aerosol particles once they are transported to duct walls. The results of calculations with the modified models have been successfully compared to data from Light Water Reactor Aerosol Containment Experiments (LACE) conducted by an international consortium at Hanford, Washington
Guevara, Marc; Pay, María Teresa; Martínez, Francesc; Soret, Albert; Denier van der Gon, Hugo; Baldasano, José M.
2014-12-01
This work examines and compares the performance of two emission datasets on modelling air quality concentrations for Spain: (i) the High-Elective Resolution Modelling Emissions System (HERMESv2.0) and (ii) the TNO-MACC-II emission inventory. For this purpose, the air quality system CALIOPE-AQFS (WRF-ARW/CMAQ/BSC-DREAM8b) was run over Spain for February and June 2009 using the two emission datasets (4 km × 4 km and 1 h). Nitrogen dioxide (NO2), sulphur dioxide (SO2), Ozone (O3) and particular matter (PM10) modelled concentrations were compared with measurements at different type of air quality stations (i.e. rural background, urban, suburban industrial). A preliminary emission comparison showed significant discrepancies between the two datasets, highlighting an overestimation of industrial emissions in urban areas when using TNO-MACC-II. However, simulations showed similar performances of both emission datasets in terms of air quality. Modelled NO2 concentrations were similar between both datasets at the background stations, although TNO-MACC-II presented lower underestimations due to differences in industrial, other mobile sources and residential emissions. At Madrid urban stations NO2 was significantly underestimated in both cases despite the fact that HERMESv2.0 estimates traffic emissions using a more local information and detailed methodology. This NO2 underestimation problem was not found in Barcelona due to the influence of international shipping emissions located in the coastline. An inadequate characterization of some TNO-MACC-II's point sources led to high SO2 biases at industrial stations, especially in northwest Spain where large facilities are grouped. In general, surface O3 was overestimated regardless of the emission dataset used, depicting the problematic of CMAQ on overestimating low ozone at night. On the other hand, modelled PM10 concentrations were less underestimated in urban areas when applying HERMESv2.0 due to the inclusion of road dust
Kulawik, Susan; Wunch, Debra; O’Dell, Christopher; Frankenberg, Christian; Reuter, Maximilian; Chevallier, Frederic; Oda, Tomohiro; Sherlock, Vanessa; Buchwitz, Michael; Osterman, Greg;
2016-01-01
Consistent validation of satellite CO2 estimates is a prerequisite for using multiple satellite CO2 measurements for joint flux inversion, and for establishing an accurate long-term atmospheric CO2 data record. Harmonizing satellite CO2 measurements is particularly important since the differences in instruments, observing geometries, sampling strategies, etc. imbue different measurement characteristics in the various satellite CO2 data products. We focus on validating model and satellite observation attributes that impact flux estimates and CO2 assimilation, including accurate error estimates, correlated and random errors, overall biases, biases by season and latitude, the impact of coincidence criteria, validation of seasonal cycle phase and amplitude, yearly growth, and daily variability. We evaluate dry-air mole fraction (X(sub CO2)) for Greenhouse gases Observing SATellite (GOSAT) (Atmospheric CO2 Observations from Space, ACOS b3.5) and SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) (Bremen Optimal Estimation DOAS, BESD v2.00.08) as well as the CarbonTracker (CT2013b) simulated CO2 mole fraction fields and the Monitoring Atmospheric Composition and Climate (MACC) CO2 inversion system (v13.1) and compare these to Total Carbon Column Observing Network (TCCON) observations (GGG2012/2014). We find standard deviations of 0.9, 0.9, 1.7, and 2.1 parts per million vs. TCCON for CT2013b, MACC, GOSAT, and SCIAMACHY, respectively, with the single observation errors 1.9 and 0.9 times the predicted errors for GOSAT and SCIAMACHY, respectively. We quantify how satellite error drops with data averaging by interpreting according to (error(sup 2) equals a(sup 2) plus b(sup 2) divided by n (with n being the number of observations averaged, a the systematic (correlated) errors, and b the random (uncorrelated) errors). a and b are estimated by satellites, coincidence criteria, and hemisphere. Biases at individual stations have year
International Nuclear Information System (INIS)
Saujot, Mathieu; Lefèvre, Benoit
2016-01-01
Many cities are implementing policies and climate action plans. Yet local climate policies suffer from a lack of scientific understanding and evaluation methods able to support the definition of efficient mitigation strategies. The purpose of this paper is to build on classical approaches in the energy policy field that exist at the national and international level to propose an urban MACCs methodology able to fulfill this lack and inform local debates. The methodology is an extension of static “expert-based” MACCs; it combines a land use transport integrated model and an abatement cost methodology that integrates co-benefits, and takes into account the spatial and systemic dimensions of cities. The methodology is implemented for the transportation sector of a mid-sized European city (Grenoble, France). Our results present the cost-effectiveness and political feasibility of several proposed measures. We find that the inclusion of co-benefits can profoundly change the cost-benefit assessment of transport mitigation options. Moreover we underline the key parameters determining the cost-effectiveness ranking of mitigation options. These urban MACCs aim to serve as a bridge between urban planning and mitigation policies and can thus contribute to strengthen and align sustainable and climate change agendas at the local level. - Highlights: •Local climate policies lack scientific understanding for prioritizing mitigation actions. •We develop a method to evaluate cost-effectiveness of urban transportation actions. •This method combines urban modeling and MACCs to inform urban planning. •Abatement costs from its application to a mid-sized city are presented. •The impact of the inclusion of co-benefits is analyzed.
Evaluation of upward heat flux in ex-vessel molten core heat transfer using MELCOR
International Nuclear Information System (INIS)
Park, S.Y.; Park, J.H.; Kim, S.D.; Kim, D.H.; Kim, H.D.
2000-01-01
The purpose of this study is to share experiences of MELCOR application to resolve the molten corium-concrete interaction (MCCI) issue in the Korea Next Generation Reactor (KNGR). In the evaluation of concrete erosion, the heat transfer modeling from the molten corium internal to the corium pool surface is very important and uncertain. MELCOR employs Kutateladze or Greene's bubble-enhanced heat transfer model for the internal heat transfer. The phenomenological uncertainty is so large that the model provides several model parameters in addition to the phenomenological model for user flexibility. However, the model parameters do not work on Kutateladze correlation at the top of the molten layer. From our experience, a code modification is suggested to match the upward heat flux with the experimental results. In this analysis, minor modification was carried out to calculate heat flux from the top molten layer to corium surface, and efforts were made to find out the best value of the model parameter based on upward heat flux of MACE test M1B. Discussion also includes its application to KNGR. (author)
Energy Technology Data Exchange (ETDEWEB)
Dehjourian, Mehdi; Rahgoshay, Mohmmad; Jahanfamia, Gholamreza [Dept. of Nuclear Engineering, Science and Research Branch, Islamic Azad University of Tehran, Tehran (Iran, Islamic Republic of); Sayareh, Reza [Faculty of Electrical and Computer Engineering, Kerman Graduate University of Technology, Kerman (Iran, Islamic Republic of); Shirani, Amir Saied [Faculty of Engineering, Shahid Beheshti University, Tehran (Iran, Islamic Republic of)
2016-10-15
Hydrogen release during severe accidents poses a serious threat to containment integrity. Mitigating procedures are necessary to prevent global or local explosions, especially in large steel shell containments. The management of hydrogen safety and prevention of over-pressurization could be implemented through a hydrogen reduction system and spray system. During the course of the hypothetical large break loss-of-coolant accident in a nuclear power plant, hydrogen is generated by a reaction between steam and the fuel-cladding inside the reactor pressure vessel and also core concrete interaction after ejection of melt into the cavity. The MELCOR 1.8.6 was used to assess core degradation and containment behavior during the large break loss-of-coolant accident without the actuation of the safety injection system except for accumulators in Beznau nuclear power plant. Also, hydrogen distribution in containment and performance of hydrogen reduction system were investigated.
Stand-alone containment analysis of Phébus FPT tests with ASTEC and MELCOR codes: the FPT-2 test.
Gonfiotti, Bruno; Paci, Sandro
2018-03-01
During the last 40 years, many studies have been carried out to investigate the different phenomena occurring during a Severe Accident (SA) in a Nuclear Power Plant (NPP). Such efforts have been supported by the execution of different experimental campaigns, and the integral Phébus FP tests were probably some of the most important experiments in this field. In these tests, the degradation of a Pressurized Water Reactor (PWR) fuel bundle was investigated employing different control rod materials and burn-up levels in strongly or weakly oxidizing conditions. From the findings on these and previous tests, numerical codes such as ASTEC and MELCOR have been developed to analyze the evolution of a SA in real NPPs. After the termination of the Phébus FP campaign, these two codes have been furthermore improved to implement the more recent findings coming from different experimental campaigns. Therefore, continuous verification and validation is still necessary to check that the new improvements introduced in such codes allow also a better prediction of these Phébus tests. The aim of the present work is to re-analyze the Phébus FPT-2 test employing the updated ASTEC and MELCOR code versions. The analysis focuses on the stand-alone containment aspects of this test, and three different spatial nodalizations of the containment vessel (CV) have been developed. The paper summarizes the main thermal-hydraulic results and presents different sensitivity analyses carried out on the aerosols and fission products (FP) behavior. When possible, a comparison among the results obtained during this work and by different authors in previous work is also performed. This paper is part of a series of publications covering the four Phébus FP tests using a PWR fuel bundle: FPT-0, FPT-1, FPT-2, and FPT-3, excluding the FPT-4 one, related to the study of the release of low-volatility FP and transuranic elements from a debris bed and a pool of melted fuel.
Stand-alone containment analysis of Phébus FPT tests with ASTEC and MELCOR codes: the FPT-2 test
Directory of Open Access Journals (Sweden)
Bruno Gonfiotti
2018-03-01
Full Text Available During the last 40 years, many studies have been carried out to investigate the different phenomena occurring during a Severe Accident (SA in a Nuclear Power Plant (NPP. Such efforts have been supported by the execution of different experimental campaigns, and the integral Phébus FP tests were probably some of the most important experiments in this field. In these tests, the degradation of a Pressurized Water Reactor (PWR fuel bundle was investigated employing different control rod materials and burn-up levels in strongly or weakly oxidizing conditions. From the findings on these and previous tests, numerical codes such as ASTEC and MELCOR have been developed to analyze the evolution of a SA in real NPPs. After the termination of the Phébus FP campaign, these two codes have been furthermore improved to implement the more recent findings coming from different experimental campaigns. Therefore, continuous verification and validation is still necessary to check that the new improvements introduced in such codes allow also a better prediction of these Phébus tests. The aim of the present work is to re-analyze the Phébus FPT-2 test employing the updated ASTEC and MELCOR code versions. The analysis focuses on the stand-alone containment aspects of this test, and three different spatial nodalizations of the containment vessel (CV have been developed. The paper summarizes the main thermal-hydraulic results and presents different sensitivity analyses carried out on the aerosols and fission products (FP behavior. When possible, a comparison among the results obtained during this work and by different authors in previous work is also performed. This paper is part of a series of publications covering the four Phébus FP tests using a PWR fuel bundle: FPT-0, FPT-1, FPT-2, and FPT-3, excluding the FPT-4 one, related to the study of the release of low-volatility FP and transuranic elements from a debris bed and a pool of melted fuel. Keywords: Safety
Georgoulias, Aristeidis K.; Tsikerdekis, Athanasios; Amiridis, Vassilis; Marinou, Eleni; Benedetti, Angela; Zanis, Prodromos; Kourtidis, Konstantinos
2016-04-01
Significant amounts of dust are being transferred on an annual basis over the Mediterranean Basin and continental Europe from Northern Africa (Sahara Desert) and Middle East (Arabian Peninsula) as well as from other local sources. Dust affects a number of processes in the atmosphere modulating weather and climate also having an impact on human health and the economy. Therefore, the ability of simulating adequately the amount and optical properties of dust is essential. This work focuses on the evaluation of the MACC reanalysis dust product over the regions mentioned above. The evaluation procedure is based on pure dust satellite retrievals from CALIOP/CALIPSO that cover the period 2007-2012. The CALIOP/CALIPSO data utilized here come from an optimized retrieval scheme that was originally developed within the framework of the LIVAS (Lidar Climatology of Vertical Aerosol Structure for Space-Based LIDAR Simulation Studies) project. CALIOP/CALIPSO dust extinction coefficients and dust optical depth patterns at 532 nm are used for the validation of MACC natural aerosol extinction coefficients and dust optical depth patterns at 550 nm. Overall, it is shown in this work that space-based lidars may play a major role in the improvement of the MACC aerosol product. This research has been financed under the FP7 Programme MarcoPolo (Grand Number 606953, Theme SPA.2013.3.2-01).
Development of a prototype graphic simulation program for severe accident training
International Nuclear Information System (INIS)
Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo
2000-05-01
This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database interface module. Main functions of
Analysis of source term aspects in the experiment Phebus FPT1 with the MELCOR and CFX codes
Energy Technology Data Exchange (ETDEWEB)
Martin-Fuertes, F. [Universidad Politecnica de Madrid, UPM, Nuclear Engineering Department, Jose Gutierrez Abascal 2, 28006 Madrid (Spain)]. E-mail: francisco.martinfuertes@upm.es; Barbero, R. [Universidad Politecnica de Madrid, UPM, Nuclear Engineering Department, Jose Gutierrez Abascal 2, 28006 Madrid (Spain); Martin-Valdepenas, J.M. [Universidad Politecnica de Madrid, UPM, Nuclear Engineering Department, Jose Gutierrez Abascal 2, 28006 Madrid (Spain); Jimenez, M.A. [Universidad Politecnica de Madrid, UPM, Nuclear Engineering Department, Jose Gutierrez Abascal 2, 28006 Madrid (Spain)
2007-03-15
Several aspects related to the source term in the Phebus FPT1 experiment have been analyzed with the help of MELCOR 1.8.5 and CFX 5.7 codes. Integral aspects covering circuit thermalhydraulics, fission product and structural material release, vapours and aerosol retention in the circuit and containment were studied with MELCOR, and the strong and weak points after comparison to experimental results are stated. Then, sensitivity calculations dealing with chemical speciation upon release, vertical line aerosol deposition and steam generator aerosol deposition were performed. Finally, detailed calculations concerning aerosol deposition in the steam generator tube are presented. They were obtained by means of an in-house code application, named COCOA, as well as with CFX computational fluid dynamics code, in which several models for aerosol deposition were implemented and tested, while the models themselves are discussed.
International Nuclear Information System (INIS)
Harper, F.T.; Young, M.L.; Miller, L.A.; Hora, S.C.; Lui, C.H.; Goossens, L.H.J.; Cooke, R.M.; Paesler-Sauer, J.; Helton, J.C.
1995-01-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the second of a three-volume document describing the project and contains two appendices describing the rationales for the dispersion and deposition data along with short biographies of the 16 experts who participated in the project
Energy Technology Data Exchange (ETDEWEB)
Harper, F.T.; Young, M.L.; Miller, L.A. [Sandia National Labs., Albuquerque, NM (United States); Hora, S.C. [Univ. of Hawaii, Hilo, HI (United States); Lui, C.H. [Nuclear Regulatory Commission, Washington, DC (United States); Goossens, L.H.J.; Cooke, R.M. [Delft Univ. of Technology (Netherlands); Paesler-Sauer, J. [Research Center, Karlsruhe (Germany); Helton, J.C. [and others
1995-01-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the second of a three-volume document describing the project and contains two appendices describing the rationales for the dispersion and deposition data along with short biographies of the 16 experts who participated in the project.
International Nuclear Information System (INIS)
Gonfiotti, Bruno; Paci, Sandro
2015-01-01
Highlights: • The I 2 transport in a multi-compartment vessel was analysed. • ASTEC and MELCOR codes were employed. • Same nodalisation for the code-to-code comparison. • The I 2 concentrations were quite well simulated in ASTEC. • Numerical issues on MELCOR. - Abstract: This work is related to the application of the ASTEC V2.0R3p1 and MELCOR V2.1.4803 codes to the analysis of the THAI Iod-11 and Iod-12 containment tests characterised by an iodine release. The main scope of these two tests was to investigate the steel interaction on dry and wet surfaces, with an interaction supposed to be a two-steps process: an initial faster and reversible physisorption followed by a slower, and irreversible, chemisorption of the physisorbed I 2 . The aim of the present work is to highlight advancements and limitations of the current ASTEC and MELCOR code versions respect to the older code versions employed during the European SARNET projects. The investigation was carried out as a code-to-code comparison vs. the experimental THAI data, focusing on the evaluation of the code models treating the iodine behaviour. A similar spatial nodalisation was employed for both codes. As main result, ASTEC had shown an overall good agreement compared to the iodine related experimental data while, on contrary, MELCOR had shown poor results, probably due to unsolved numerical issues and unsatisfactory iodine modellisation
International Nuclear Information System (INIS)
Sassen, F.; Rapp, W.; Tietsch, W.; Roess, P.
2007-01-01
A concept for a Level 2 Probabilistic Risk Assessment (L2 PRA) for a German Boiling Water Reactor (BWR) has been developed taking into account the role of L2 PRA within the German regulatory landscape. According to this concept, a plant specific evaluation of the severe accident phenomenology as well as analyses of the accident progression for the severe accident scenarios has been performed. Furthermore a plant specific MELCOR 1.8.6 model has been developed and special MELCOR source term calculations have been performed for the different release paths. This paper will present examples from the different areas described above. (author)
Improved hydrogen combustion model for multi-compartment analysis
International Nuclear Information System (INIS)
Ogino, Masao; Hashimoto, Takashi
2000-01-01
NUPEC has been improving a hydrogen combustion model in MELCOR code for severe accident analysis. In the proposed combustion model, the flame velocity in a node was predicted using six different flame front shapes of fireball, prism, bubble, spherical jet, plane jet, and parallelepiped. A verification study of the proposed model was carried out using the NUPEC large-scale combustion test results following the previous work in which the GRS/Battelle multi-compartment combustion test results had been used. The selected test cases for the study were the premixed test and the scenario-oriented test which simulated the severe accident sequences of an actual plant. The improved MELCOR code replaced by the proposed model could predict sufficiently both results of the premixed test and the scenario-oriented test of NUPEC large-scale test. The improved MELCOR code was confirmed to simulate the combustion behavior in the multi-compartment containment vessel during a severe accident with acceptable degree of accuracy. Application of the new model to the LWR severe accident analysis will be continued. (author)
COMPARISON OF CONSEQUENCE ANALYSIS RESULTS FROM TWO METHODS OF PROCESSING SITE METEOROLOGICAL DATA
International Nuclear Information System (INIS)
, D
2007-01-01
Consequence analysis to support documented safety analysis requires the use of one or more years of representative meteorological data for atmospheric transport and dispersion calculations. At minimum, the needed meteorological data for most atmospheric transport and dispersion models consist of hourly samples of wind speed and atmospheric stability class. Atmospheric stability is inferred from measured and/or observed meteorological data. Several methods exist to convert measured and observed meteorological data into atmospheric stability class data. In this paper, one year of meteorological data from a western Department of Energy (DOE) site is processed to determine atmospheric stability class using two methods. The method that is prescribed by the U.S. Nuclear Regulatory Commission (NRC) for supporting licensing of nuclear power plants makes use of measurements of vertical temperature difference to determine atmospheric stability. Another method that is preferred by the U.S. Environmental Protection Agency (EPA) relies upon measurements of incoming solar radiation, vertical temperature gradient, and wind speed. Consequences are calculated and compared using the two sets of processed meteorological data from these two methods as input data into the MELCOR Accident Consequence Code System 2 (MACCS2) code
A severe accident analysis for the system-integrated modular advanced reactor
International Nuclear Information System (INIS)
Jung, Gunhyo; Jae, Moosung
2015-01-01
The System-Integrated Modular Advanced Reactor (SMART) that has been recently designed in KOREA and has acquired standard design certification from the nuclear power regulatory body (NSSC) is an integral type reactor with 330MW thermal power. It is a small sized reactor in which the core, steam generator, pressurizer, and reactor coolant pump that are in existing pressurized light water reactors are designed to be within a pressure vessel without any separate pipe connection. In addition, this reactor has much different design characteristics from existing pressurized light water reactors such as the adoption of a passive residual heat removal system and a cavity flooding system. Therefore, the safety of the SMART against severe accidents should be checked through severe accident analysis reflecting the design characteristics of the SMART. For severe accident analysis, an analysis model has been developed reflecting the design information presented in the standard design safety analysis report. The severe accident analysis model has been developed using the MELCOR code that is widely used to evaluate pressurized LWR severe accidents. The steady state accident analysis model for the SMART has been simulated. According to the analysis results, the developed model reflecting the design of the SMART is found to be appropriate. Severe accident analysis has been performed for the representative accident scenarios that lead to core damage to check the appropriateness of the severe accident management plan for the SMART. The SMART has been shown to be safe enough to prevent severe accidents by utilizing severe accident management systems such as a containment spray system, a passive hydrogen recombiner, and a cavity flooding system. In addition, the SMART is judged to have been technically improved remarkably compared to existing PWRs. The SMART has been designed to have a larger reactor coolant inventory compared to its core's thermal power, a large surface area in
Literature study of source term research for PWRs
Energy Technology Data Exchange (ETDEWEB)
Sponton, L.L.; NiIsson, Lars
2001-04-01
A literature survey has been carried out in support of ongoing source term calculations with the MELCOR code of some severe accident scenarios for the Swedish Ringhals 2 pressurised water reactor (PWR). The research in the field of severe accidents in power reactors and the source term for subsequent release of radioisotopes was intensified after the Harrisburg accident and has produced a large amount of reports and papers. This survey was therefore limited to research concerning PWR type of reactors and with emphasis on papers related to MELCOR code development. A background is given, relating to some historic documents, and then more recent research after 1990 is reviewed. Of special interest is the ongoing PMbus-programme which is creating new and important results of benefit to the code development and validation of, among others, the MELCOR code. It is concluded that source term calculations involve simulation of many interacting complex physical phenomena, which result in large uncertainties The research has, however, over the years led to considerable improvements Thus has the uncertainty in source term predictions been reduced one to two orders of magnitude from the simpler codes in the early 1980-s to the more realistic codes of today, like MELCOR.
Literature study of source term research for PWRs
International Nuclear Information System (INIS)
Sponton, L.L.; NiIsson, Lars
2001-04-01
A literature survey has been carried out in support of ongoing source term calculations with the MELCOR code of some severe accident scenarios for the Swedish Ringhals 2 pressurised water reactor (PWR). The research in the field of severe accidents in power reactors and the source term for subsequent release of radioisotopes was intensified after the Harrisburg accident and has produced a large amount of reports and papers. This survey was therefore limited to research concerning PWR type of reactors and with emphasis on papers related to MELCOR code development. A background is given, relating to some historic documents, and then more recent research after 1990 is reviewed. Of special interest is the ongoing PMbus-programme which is creating new and important results of benefit to the code development and validation of, among others, the MELCOR code. It is concluded that source term calculations involve simulation of many interacting complex physical phenomena, which result in large uncertainties The research has, however, over the years led to considerable improvements Thus has the uncertainty in source term predictions been reduced one to two orders of magnitude from the simpler codes in the early 1980-s to the more realistic codes of today, like MELCOR
Development of a prototype graphic simulation program for severe accident training
Energy Technology Data Exchange (ETDEWEB)
Kim, Ko Ryu; Jeong, Kwang Sub; Ha, Jae Joo
2000-05-01
This is a report of the development process and related technologies of severe accident graphic simulators, required in industrial severe accident management and training. Here, we say 'a severe accident graphic simulator' as a graphics add-in system to existing calculation codes, which can show the severe accident phenomena dynamically on computer screens and therefore which can supplement one of main defects of existing calculation codes. With graphic simulators it is fairly easy to see the total behavior of nuclear power plants, where it was very difficult to see only from partial variable numerical information. Moreover, the fast processing and control feature of a graphic simulator can give some opportunities of predicting the severe accident advancement among several possibilities, to one who is not an expert. Utilizing graphic simulators' we expect operators' and TSC members' physical phenomena understanding enhancement from the realistic dynamic behavior of plants. We also expect that severe accident training course can gain better training effects using graphic simulator's control functions and predicting capabilities, and therefore we expect that graphic simulators will be effective decision-aids tools both in sever accident training course and in real severe accident situations. With these in mind, we have developed a prototype graphic simulator having surveyed related technologies, and from this development experiences we have inspected the possibility to build a severe accident graphic simulator. The prototype graphic simulator is developed under IBM PC WinNT environments and is suited to Uljin 3and4 nuclear power plant. When supplied with adequate severe accident scenario as an input, the prototype can provide graphical simulations of plant safety systems' dynamic behaviors. The prototype is composed of several different modules, which are phenomena display module, MELCOR data interface module and graphic database
AIRS Views of Anthropogenic and Biomass Burning CO: INTEX-B/MILAGRO and TEXAQS/GoMACCS
McMillan, W. W.; Warner, J.; Wicks, D.; Barnet, C.; Sachse, G.; Chu, A.; Sparling, L.
2006-12-01
Utilizing the Atmospheric InfraRed Sounder's (AIRS) unique spatial and temporal coverage, we present observations of anthropogenic and biomass burning CO emissions as observed by AIRS during the 2006 field experiments INTEX-B/MILAGRO and TEXAQS/GoMACCS. AIRS daily CO maps covering more than 75% of the planet demonstrate the near global transport of these emissions. AIRS day/night coverage of significant portions of the Earth often show substantial changes in 12 hours or less. However, the coarse vertical resolution of AIRS retrieved CO complicates its interpretation. For example, extensive CO emissions are evident from Asia during April and May 2006, but it is difficult to determine the relative contributions of biomass burning in Thailand vs. domestic and industrial emissions from China. Similarly, sometimes AIRS sees enhanced CO over and downwind of Mexico City and other populated areas. AIRS low information content and decreasing sensitivity in the boundary layer can result in underestimates of CO total columns and free tropospheric abundances. Building on our analyses of INTEX-A/ICARTT data from 2004, we present comparisons with INTEX-B/MILAGRO and TEXAQS/GoMACCS in situ aircraft measurements and other satellite CO observations. The combined analysis of AIRS CO, water vapor and O3 retrievals; MODIS aerosol optical depths; and forward trajectory computations illuminate a variety of dynamical processes in the troposphere.
MELCOR 1.8.1 assessment: LACE aerosol experiment LA4
International Nuclear Information System (INIS)
Kmetyk, L.N.
1991-09-01
The MELCOR code has been used to simulate LACE aerosol experiment LA4. In this test, the behavior of single- and double-component, hygroscopic and nonhygroscopic, aerosols in a condensing environment was monitored. Results are compared to experimental data, and to CONTAIN calculations. Sensitivity studies have been done on time step effects and machine dependencies; thermal/hydraulic parameters such as condensation on heat structures and on pool surface, and radiation heat transfer; and aerosol parameters such as number of MAEROS components and sections assumed, the degree to which plated aerosols are washed off heat structures by condensate film draining, and the effect of non-default values for shape factors and diameter limits. 9 refs., 50 figs., 13 tabs
MELCOR Applications to SOARCA and Fukushima
Energy Technology Data Exchange (ETDEWEB)
Gauntt, Randall O.
2014-03-01
This PowerPoint presentation was organized as follows: Background; Overview of Fukushima Accidents; Comparisons of SOARCA Study with Fukushima accidents; Equipment functioning in real-world accidents; and, Conclusions.
Energy Technology Data Exchange (ETDEWEB)
Harper, F.T.; Young, M.L.; Miller, L.A. [Sandia National Labs., Albuquerque, NM (United States)] [and others
1995-01-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the third of a three-volume document describing the project and contains descriptions of the probability assessment principles; the expert identification and selection process; the weighting methods used; the inverse modeling methods; case structures; and summaries of the consequence codes.
International Nuclear Information System (INIS)
Harper, F.T.; Young, M.L.; Miller, L.A.
1995-01-01
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, completed in 1990, estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The objective was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation, developed independently, was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model along with the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the third of a three-volume document describing the project and contains descriptions of the probability assessment principles; the expert identification and selection process; the weighting methods used; the inverse modeling methods; case structures; and summaries of the consequence codes
A MARS and MIDAS Linked Accident Simulation for Large LOCA in APR1400
International Nuclear Information System (INIS)
Choi, Young; Kim, K. R.; Kim, D. H.; Chung, B. D.
2006-01-01
A linked calculation utilizing the design-basis code MARS and the severe accident code MIDAS has been accomplished for a station blackout simulation in APR1400. The MARS code was developed by using the RELAP3/MOD3 and COBRA-TF codes, while the MIDAS code is currently under a development process using the MELCOR code. The objectives of this paper are to explain how to identify the MAR-MIDAS linked calculation outlines and the technical problems, including the MARS data transfer method, the MIDAS input generation works and so on. For the performance verification of the MARS-MIDAS linked calculation, the MARS, MIDAS and their linkage system are run independently for the same initiating event, so that their data can be compared with each other after the selection of proper variables
International Nuclear Information System (INIS)
Guo, Y.; Wang, G.; Cheng, Y.; Peng, C.
2015-01-01
Water Cooled Blanket (WCB) is very important in the concept design and energy transfer in future fusion power plant. One concept design of WCB is under computational testing. RELAP5 and MELCOR codes, which are mature and often used in nuclear engineering, are selected as simulation tools. The complex inner flow channels and heat sources are simplified according to its thermal-hydraulic characteristics. Then the nodal models for RELAP5 and MELCOR are built for approximating the concept design. The superheated steam scheme is analyzed by two codes separately under different power levels. After some adjustments of the inlet flow resistance coefficients of some flow channels, the reasonable stable conditions can be obtained. The stable fluid and wall temperature distributions and pressure drops are studied. The results of two codes are compared and some advices are given. (authors)
Final Report on ITER Task Agreement 81-18
Energy Technology Data Exchange (ETDEWEB)
Brad J. Merrill
2008-02-01
During 2007, the US International Thermonuclear Experimental Reactor (ITER) Project Office (USIPO) entered into a Task Agreement (TA) with the ITER International Organization (IO) to conduct Research and Development activity and/or Design activity in the area of Safety Analyses. There were four tasks within this TA, which were to provide the ITER IO with: 1) Quality Assurance (QA) documentation for the MELCOR 1.8.2 Fusion code, 2) a pedigreed version of MELCOR 1.8.2, 3) assistance in MELCOR input deck development and accident analyses, and 4) support and assistance in the operation of the MELCOR 1.8.2. This report, which is the final report for this agreement, documents the completion of the work scope under this ITER TA, designated as TA 81-18.
Probabilistic Accident Consequence Uncertainty - A Joint CEC/USNRC Study
International Nuclear Information System (INIS)
Gregory, Julie J.; Harper, Frederick T.
1999-01-01
The joint USNRC/CEC consequence uncertainty study was chartered after the development of two new probabilistic accident consequence codes, MACCS in the U.S. and COSYMA in Europe. Both the USNRC and CEC had a vested interest in expanding the knowledge base of the uncertainty associated with consequence modeling, and teamed up to co-sponsor a consequence uncertainty study. The information acquired from the study was expected to provide understanding of the strengths and weaknesses of current models as well as a basis for direction of future research. This paper looks at the elicitation process implemented in the joint study and discusses some of the uncertainty distributions provided by eight panels of experts from the U.S. and Europe that were convened to provide responses to the elicitation. The phenomenological areas addressed by the expert panels include atmospheric dispersion and deposition, deposited material and external doses, food chain, early health effects, late health effects and internal dosimetry
Probabilistic Accident Consequence Uncertainty - A Joint CEC/USNRC Study
Energy Technology Data Exchange (ETDEWEB)
Gregory, Julie J.; Harper, Frederick T.
1999-07-28
The joint USNRC/CEC consequence uncertainty study was chartered after the development of two new probabilistic accident consequence codes, MACCS in the U.S. and COSYMA in Europe. Both the USNRC and CEC had a vested interest in expanding the knowledge base of the uncertainty associated with consequence modeling, and teamed up to co-sponsor a consequence uncertainty study. The information acquired from the study was expected to provide understanding of the strengths and weaknesses of current models as well as a basis for direction of future research. This paper looks at the elicitation process implemented in the joint study and discusses some of the uncertainty distributions provided by eight panels of experts from the U.S. and Europe that were convened to provide responses to the elicitation. The phenomenological areas addressed by the expert panels include atmospheric dispersion and deposition, deposited material and external doses, food chain, early health effects, late health effects and internal dosimetry.
Comparative study of the hydrogen generation during short term station blackout (STSBO) in a BWR
International Nuclear Information System (INIS)
Polo-Labarrios, M.A.; Espinosa-Paredes, G.
2015-01-01
Highlights: • Comparative study of generation in a simulated STSBO severe accident. • MELCOR and SCDAP/RELAP5 codes were used to understanding the main phenomena. • Both codes present similar thermal-hydraulic behavior for pressure and boil off. • SCDAP/RELAP5 predicts 15.8% lower hydrogen production than MELCOR. - Abstract: The aim of this work is the comparative study of hydrogen generation and the associated parameters in a simulated severe accident of a short-term station blackout (STSBO) in a typical BWR-5 with Mark-II containment. MELCOR (v.1.8.6) and SCDAP/RELAP5 (Mod.3.4) codes were used to understand the main phenomena in the STSBO event through the results comparison obtained from simulations with these codes. Due that the simulation scope of SCDAP/RELAP5 is limited to failure of the vessel pressure boundary, the comparison was focused on in-vessel severe accident phenomena; with a special interest in the vessel pressure, boil of cooling, core temperature, and hydrogen generation. The results show that at the beginning of the scenario, both codes present similar thermal-hydraulic behavior for pressure and boil off of cooling, but during the relocation, the pressure and boil off, present differences in timing and order of magnitude. Both codes predict in similar time the beginning of melting material drop to the lower head. As far as the hydrogen production rate, SCDAP/RELAP5 predicts 15.8% lower production than MELCOR
MELCOR modeling of the PBF [Power Burst Facility] Severe Fuel Damage Test 1-4
International Nuclear Information System (INIS)
Madni, I.K.
1990-01-01
This paper describes a MELCOR Version 1.8 simulation of the Power Burst Facility (PBF) Severe Fuel Damage (SFD) Test 1--4. The input data for the analysis were obtained from the Test Results Report and from SCDAP/RELAP5 input. Results are presented for the transient liquid level in the test bundle, clad temperatures, shroud temperatures, clad oxidation and hydrogen generation, bundle geometry changes, fission product release, and heat transfer to the bypass flow. Comparisons are made with experimental data and with SCDAP/RELAP5 calculations. 10 refs., 7 figs
Research on the improvement of nuclear safety -The development of a severe accident analysis code-
International Nuclear Information System (INIS)
Kim, Heui Dong; Cho, Sung Won; Park, Jong Hwa; Hong, Sung Wan; Yoo, Dong Han; Hwang, Moon Kyoo; Noh, Kee Man; Song, Yong Man
1995-07-01
For prevention and mitigation of the containment failure during severe accident, the study is focused on the severe accident phenomena, especially, the ones occurring inside the cavity and is intended to improve existing models and develop analytical tools for the assessment of severe accidents. A correlation equation of the flame velocity of pre mixture gas of H 2 /air/steam has been suggested and combustion flame characteristic was analyzed using a developed computer code. For the analysis of the expansion phase of vapor explosion, the mechanical model has been developed. The development of a debris entrainment model in a reactor cavity with captured volume has been continued to review and examine the limitation and deficiencies of the existing models. Pre-test calculation was performed to support the severe accident experiment for molten corium concrete interaction study and the crust formation process and heat transfer characteristics of the crust have been carried out. A stress analysis code was developed using finite element method for the reactor vessel lower head failure analysis. Through international program of PHEBUS-FP and participation in the software development, the research on the core degradation process and fission products release and transportation are undergoing. CONTAIN and MELCOR codes were continuously updated under the cooperation with USNRC and French developed computer codes such as ICARE2, ESCADRE, SOPHAEROS were also installed into the SUN workstation. 204 figs, 61 tabs, 87 refs. (Author)
Study on the hydrogen explosion risk at reactor building during a severe accident
Energy Technology Data Exchange (ETDEWEB)
NONE
2013-08-15
JNES carried out analysis on the hydrogen mixing and explosion at reactor building with CFD code and explosion analysis code to evaluate what exactly has happened at the reactor buildings of the Fukushima Daiichi NPS. Based on the MELCOR severe accident analysis results of Fukushima Daiichi Unit 1 and Unit 3, sensitivity study using the CFD code FLUENT was carried out on the parameter of the release rate, total mass of hydrogen gas, the release path between reactor building and PCV, and so on. Then an analysis using AUTODYN code was carried out to investigate the explosion at the reactor building of Unit 4 as well as Unit 1 and, Unit 3. With those analysis results it became possible to estimate the leaked path and the total amount of leaked hydrogen gas from PCV to reactor building. (author)
Energy Technology Data Exchange (ETDEWEB)
Hoseyni, Seyed Mohsen [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Basic Sciences; Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Young Researchers and Elite Club; Pourgol-Mohammad, Mohammad [Sahand Univ. of Technology, Tabriz (Iran, Islamic Republic of). Dept. of Mechanical Engineering; Yousefpour, Faramarz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)
2017-03-15
This paper deals with simulation, sensitivity and uncertainty analysis of LP-FP-2 experiment of LOFT test facility. The test facility simulates the major components and system response of a pressurized water reactor during a LOCA. MELCOR code is used for predicting the fission product release from the core fuel elements in LOFT LP-FP-2 experiment. Moreover, sensitivity and uncertainty analysis is performed for different CORSOR models simulating release of fission products in severe accident calculations for nuclear power plants. The calculated values for the fission product release are compared under different modeling options to the experimental data available from the experiment. In conclusion, the performance of 8 CORSOR modeling options is assessed for available modeling alternatives in the code structure.
Phenomenology and course of severe accidents in PWR-plants training by teaching and demonstration
International Nuclear Information System (INIS)
Sonnenkalb, M.; Rohde, J.
1999-01-01
A special one day training course on 'Phenomenology and Course of Severe Accidents in PWR-Plants' was developed at GRS initiated by the interest of German utilities. The work was done in the frame of projects sponsored by the German Ministries for Environment, Nature Conservation and Nuclear Safety (BMW) and for Education, Science, Research and Technology (BMBF). In the paper the intention and the subject of this training course are discussed and selected parts of the training course are presented. Demonstrations are made within this training course with the GRS simulator system ATLAS to achieve a broader understanding of the phenomena discussed and the propagation of severe accidents on a plant specific basis. The GRS simulator system ATLAS is linked in this case to the integral code MELCOR and pre-calculated plant specific severe accident calculations are used for the demonstration together with special graphics showing plant specific details. Several training courses have been held since the first one in November, 1996 especially to operators, shift personal and the management board of a German PWR. In the meantime the training course was updated and suggestions for improvements from the participants were included. In the future this training course will be made available for members of crisis teams, instructors of commercial training centres and researchers of different institutions too. (author)
The once-through mode of steam generator reflux condensation in loss of coolant accident scenarios
International Nuclear Information System (INIS)
Liao, Y.; Guentay, S.; Suckow, D.
2009-01-01
The once-through mode of steam generator reflux condensation in the presence of noncondensable gases and/or aerosols for LOCA scenarios is introduced. This phenomenon is planned to be investigated at Paul Scherrer Institute in the ARTIST/RFLX experimental program. The plausible accident scenarios associated with the once-through reflux condensation are analyzed with MELCOR to study the safety significance and the boundary conditions of this phenomenon. This work presents the recent PSI experimental and analytical work on reflux condensation: the progress of modification to the ARTIST test facility for the purpose to study reflux condensation, and the analytical model for the once-through reflux condensation in the presence of noncondensable gas using the heat and mass transfer analogy approach. Future experimental and analytical work on reflux condensation is also outlined. (author)
Revisiting Ulchin 4 SGTR Accident - Analysis for EOP Improvement
Energy Technology Data Exchange (ETDEWEB)
Lee, Eun-Hye; Lee, Wook-Jo; Jerng, Dong-Wook [Chung-Ang University, Seoul (Korea, Republic of)
2016-10-15
The Steam Generator Tube Ruputure (SGTR) is an accident that U-tube inside the SG is defected so that the reactor coolant releases through broken U-tube and this is one of design basis accidents. Operating the Nuclear Power Plants (NPP), maintaing the integrity of core and preventing radiation release are most important things. Because of risks, many researchers have studied scenarios, impacts and the ways to mitigate SGTR accidents. The study to provide an experimental database of aerosol particle retention and to develop models to support accident management interventions during SGTR was performed. The scaled-down models of NPP were used for experiments, also, MELCOR and SCDAP/RELAP5 were used to simulate a design basis SGTR accident. This study had a major role to resolve uncertainties of various physical models for aerosol mechanical resuspension. The other study which analyzed SGTR accident for System-integrated Modular Advanced Reactor (SMART) was performed. In this analysis, the amount of break flow was focused and TASS/SMRS code was used. It assumed that maximum leak was generated, and found that high RCS pressure, low core inlet coolant temperature, and low break location of the SG cassette contributed to leakage. Although the leakage was large, there was no direct release to atmosphere because the pressure of secondary loop was maintained below the safety relief valve set point. In this analysis, comparison of mitigating procedure when SGTR occurs between shutdown condition and full power condition was performed. In shutdown condition, the core uncovery would not take place in 16 hours whether the cooling procedures are performed or not. Therefore, the integrated amount of break flow should be considered only. In this point of view, cooling through intact SG only, case 3, is the best way to minimize the amount of break flow. In full power condition, the core water level is changed due to high reactor power. The important thing to protect NPP is to keep
The evaluation of pressure effects on the ex-vessel cooling for KNGR with MELCOR
Energy Technology Data Exchange (ETDEWEB)
Park, Jong Hwa; Park, Soo Yong; Kim, Dong Ha
2001-03-01
In this report, the effect of external vessel cooling on debris coolability and vessel integrity for the KNGR were examined from the two typical pressure range of high(170 bar) and low(5 bar)case using the lower plenum model in MELCOR1.8.4. As the conditions of these calculations, 80 ton of debris was relocated simultaneously into the lower vessel head and the debris relocation temperature from the core region was 2700 K. The decay heat has been assumed to be that of one hour after reactor shutdown. The creep failure of the vessel wall was simulated with 1-D model, which can consider the rapid temperature gradient over the wall thickness during the ex-vessel cooling. From the calculation results, both the coolant temperature and the total amount of coolant mass injected into the cavity are known to be the important factors in determining the time period to keep the external vessel cool. Therefore, a long-term strategy to keep the coolant temperature subcooled throughout the transient is suggested to sustain or prolong the effect of external vessel cooling. Also, it is expected that to keep the primary side at low pressure and to perform the ex-vessel flooding be the essential conditions to sustain the vessel integrity. From MELCOR, the penetration failure always occurs after relocation regardless of the RCS pressure or availability of the external vessel cooling. Therefore, It is expected that the improvement of the model for the penetration tube failure will be necessary.
The evaluation of pressure effects on the ex-vessel cooling for KNGR with MELCOR
International Nuclear Information System (INIS)
Park, Jong Hwa; Park, Soo Yong; Kim, Dong Ha
2001-03-01
In this report, the effect of external vessel cooling on debris coolability and vessel integrity for the KNGR were examined from the two typical pressure range of high(170 bar) and low(5 bar)case using the lower plenum model in MELCOR1.8.4. As the conditions of these calculations, 80 ton of debris was relocated simultaneously into the lower vessel head and the debris relocation temperature from the core region was 2700 K. The decay heat has been assumed to be that of one hour after reactor shutdown. The creep failure of the vessel wall was simulated with 1-D model, which can consider the rapid temperature gradient over the wall thickness during the ex-vessel cooling. From the calculation results, both the coolant temperature and the total amount of coolant mass injected into the cavity are known to be the important factors in determining the time period to keep the external vessel cool. Therefore, a long-term strategy to keep the coolant temperature subcooled throughout the transient is suggested to sustain or prolong the effect of external vessel cooling. Also, it is expected that to keep the primary side at low pressure and to perform the ex-vessel flooding be the essential conditions to sustain the vessel integrity. From MELCOR, the penetration failure always occurs after relocation regardless of the RCS pressure or availability of the external vessel cooling. Therefore, It is expected that the improvement of the model for the penetration tube failure will be necessary
International Nuclear Information System (INIS)
Loeffler, Horst; Kowalik, Michael; Mildenberger, Oliver; Hage, Michael
2016-06-01
The work which is documented here provides the methodological basis for improvement of the state of knowledge for accident sequences after plant external initiating events and for accident sequences which begin in the shutdown state. The analyses have been done for a PWR and for a BWR reference plant. The work has been supported by the German federal ministry BMUB under the label 3612R01361. Top objectives of the work are: - Identify relevant event sequences in order to define characteristic initial and boundary conditions - Perform accident analysis of selected sequences - Evaluate the relevance of accident sequences in a qualitative way The accident analysis is performed with the code MELCOR 1.8.6. The applied input data set has been significantly improved compared to previous analyses. The event tree method which is established in PSA level 2 has been applied for creating a structure for a unified summarization and evaluation of the results from the accident analyses. The computer code EVNTRE has been applied for this purpose. In contrast to a PSA level 2, the branching probabilities of the event tree have not been determined with the usual accuracy, but they are given in an approximate way only. For the PWR, the analyses show a considerable protective effect of the containment also in the case of beyond design events. For the BWR, there is a rather high probability for containment failure under core melt impact, but nevertheless the release of radionuclides into the environment is very limited because of plant internal retention mechanisms. This report concludes with remarks about existing knowledge gaps and with regard to core melt sequences, and about possible improvements of the plant safety.
The assessment of health effect of Yonggwang site using the MACCS code
International Nuclear Information System (INIS)
Jeong, Dognhan Yu; Kim, Seiung Hwan; Han, Byoung Sub; Song, Jong Soon
1996-12-01
The health effect assessment near the Yonggwang site by using IPE results and its site data was performed. The health effect assessment is an important part of consequence analysis of a nuclear power plant site. The MACCS code developed by SNL was used in the assessment. The necessary input data are source term data, meteorological data, population data, and detailed information about the release of radionuclides. The core inventory data for end-of-cycle are calculated by ORIGEN2 code for conservatism because fission product buildup is greatest at end-of-cycle conditions. Meteorological and population data was derived from the FSAR and environmental impact statement report, and source term release data was derived from the IPE report. by using the MACCS code, the CCDF is obtained as a result and economic impact analysis is also possible. First of all, the average value of early fatality was estimated by changing the initial value of random numbers. The average value obtained from 10 trials is in the rage between 10 -4 and 10 -3 and have a log-uniform distribution. More than 10 data are necessary in order to have a meaningful value statistically. And the calculations about early fatality, early injury, risks of early fatality, population dose within 16.0km, population risk for early fatality within 8.0km are performed. In all cases, STC-3 is the dominant contributor (about 70%), and STC-14 is the next important contributor. Therefore, in case of consequence analysis resulting from internal events, the analysis based on STC-3 which is the failure of early containment isolation is very important. Based on the calculation of CCDF for each risk measure, it is shown that CCDF has a slow slope and thus wide probability distribution in cases of early fatality, early injury, total early fatality risk, and total weighted early fatality risk, And in cases of cancer fatality and population dose within 48 km and 80km, the CCDF curve have a steep slope and thus narrow
International Nuclear Information System (INIS)
Ahn, K.I.; Kim, D.H.; Kim, S.B.; Kim, H.D.
1998-08-01
MELCOR and MAAP4 are the representative severe accident analysis codes which have been developed for the integral analysis of the phenomenological reactor lower head corium cooling behavior. Main objectives of the present study is to identify merits and disadvantages of each relevant model through the comparative analysis of the lower plenum corium cooling models employed in these two codes. The final results will be utilized for the development of LILAC phenomenological models and for the continuous improvement of the existing MELCOR reactor lower head models, which are currently being performed at the KAERI. For these purposes, first, nine reference models are selected featuring the lower head corium behavior based on the existing experimental evidences and related models. Then main features of the selected models have been critically analyzed, and finally merits and disadvantages of each corresponding model have been summarized in the view point of realistic corium behavior and reasonable modeling. Being on these evidences, summarized and presented the potential improvements for developing more advanced models. The present study has been focused on the qualitative comparison of each model and so more detailed quantitative analysis is strongly required to obtain the final conclusions for their merits and disadvantages. In addition, in order to compensate the limitations of the current model, required further studies relating closely the detailed mechanistic models with the molten material movement and heat transfer based on phase-change in the porous medium, to the existing simple models. (author). 36 refs
DEFF Research Database (Denmark)
Tully, Phillip J; Winefield, Helen R; Baker, Robert A
2015-01-01
anhedonia, anxious arousal and general distress/negative affect symptom dimensions. Incident MACCE was defined as fatal or non-fatal; myocardial infarction, unstable angina pectoris, repeat revascularization, heart failure, sustained arrhythmia, stroke or cerebrovascular accident, left ventricular failure......BACKGROUND: Although depression and anxiety have been implicated in risk for major adverse cardiovascular and cerebrovascular events (MACCE), a theoretical approach to identifying such putative links is lacking. The objective of this study was to examine the association between theoretical...... and mortality due to cardiac causes. Time-to-MACCE was determined by hazard modelling after adjustment for EuroSCORE, smoking, body mass index, hypertension, heart failure and peripheral vascular disease. RESULTS: In the total sample, there were 698 cumulative person years of survival for analysis with a median...
Studies on air ingress for pebble bed reactors
International Nuclear Information System (INIS)
Moore, R.L.; Oh, C.H.; Merrill, B.J.; Petti, D.A.
2002-01-01
A loss-of-coolant accident (LOCA) has been considered a critical event for helium-cooled pebbled bed reactors. Following helium depressurization, it is anticipated that unless countermeasures are taken air will enter the core through the break and then by molecular diffusion and ultimately by natural convection leading to oxidation of the in-core graphite structure and graphite pebbles. Thus, without any mitigating features a LOCA will lead to an air ingress event. The INEEL is studying such an event with two well-respected light water reactor transient response codes: RELAP5/ATHENA and MELCOR. To study the degree of graphite oxidation occurring due to an air ingress event, a MELCOR model of a reference pebble bed design was constructed. A modified version of MELCOR developed at INEEL, which includes graphite oxidation capabilities, and molecular diffusion of air into helium was used for these calculations. Results show that the lower reflector graphite consumes all of the oxygen before reaching the core. The results also show a long time delay between the time that the depressurization phase of the accident is over and the time that natural circulation air through the core occurs. (author)
Recent development and application of a new safety analysis code for fusion reactors
Energy Technology Data Exchange (ETDEWEB)
Merrill, Brad J., E-mail: Brad.Merrill@inl.gov; Humrickhouse, Paul W.; Shimada, Masashi
2016-11-01
Highlights: • This paper presents recent code development activities for the MELCOR for fusion and Tritium Migration Analysis Program computer codes at the Idaho National Engineering Laboratory. • The capabilities of these computer codes are being merged into a single safety analysis tool for fusion reactor accidents. • The result of benchmarking these codes against previous code versions is presented by the authors of this paper. • This new capability is applied to study the tritium inventory and permeation rate for a water cold tungsten divertor that has neutron damage at 0.3 dpa. - Abstract: This paper describes the recent progress made in the development of two codes for fusion reactor safety assessments at the Idaho National Laboratory (INL): MELCOR for fusion and the Tritium Migration Analysis Program (TMAP). During the ITER engineering design activity (EDA), the INL Fusion Safety Program (FSP) modified the MELCOR 1.8.2 code for fusion applications to perform ITER thermal hydraulic safety analyses. Because MELCOR has undergone many improvements at SNL-NM since version 1.8.2 was released, the INL FSP recently imported these same fusion modifications into the MELCOR 1.8.6 code, along with the multiple fluids modifications of MELCOR 1.8.5 for fusion used in US advanced fusion reactor design studies. TMAP has also been under development for several decades at the INL by the FSP. TMAP treats multi-specie surface absorption and diffusion in composite materials with dislocation traps, plus the movement of these species from room to room by fluid flow within a given facility. Recently, TMAP was updated to consider multiple trap site types to allow the simulation of experimental data from neutron irradiated tungsten. The natural development path for both of these codes is to merge their capabilities into one computer code to provide a more comprehensive safety tool for analyzing accidents in fusion reactors. In this paper we detail recent developments in this
Recent development and application of a new safety analysis code for fusion reactors
International Nuclear Information System (INIS)
Merrill, Brad J.; Humrickhouse, Paul W.; Shimada, Masashi
2016-01-01
Highlights: • This paper presents recent code development activities for the MELCOR for fusion and Tritium Migration Analysis Program computer codes at the Idaho National Engineering Laboratory. • The capabilities of these computer codes are being merged into a single safety analysis tool for fusion reactor accidents. • The result of benchmarking these codes against previous code versions is presented by the authors of this paper. • This new capability is applied to study the tritium inventory and permeation rate for a water cold tungsten divertor that has neutron damage at 0.3 dpa. - Abstract: This paper describes the recent progress made in the development of two codes for fusion reactor safety assessments at the Idaho National Laboratory (INL): MELCOR for fusion and the Tritium Migration Analysis Program (TMAP). During the ITER engineering design activity (EDA), the INL Fusion Safety Program (FSP) modified the MELCOR 1.8.2 code for fusion applications to perform ITER thermal hydraulic safety analyses. Because MELCOR has undergone many improvements at SNL-NM since version 1.8.2 was released, the INL FSP recently imported these same fusion modifications into the MELCOR 1.8.6 code, along with the multiple fluids modifications of MELCOR 1.8.5 for fusion used in US advanced fusion reactor design studies. TMAP has also been under development for several decades at the INL by the FSP. TMAP treats multi-specie surface absorption and diffusion in composite materials with dislocation traps, plus the movement of these species from room to room by fluid flow within a given facility. Recently, TMAP was updated to consider multiple trap site types to allow the simulation of experimental data from neutron irradiated tungsten. The natural development path for both of these codes is to merge their capabilities into one computer code to provide a more comprehensive safety tool for analyzing accidents in fusion reactors. In this paper we detail recent developments in this
Containment response to a severe accident (TMLB sequence) with and without mitigation strategies
International Nuclear Information System (INIS)
Passalacqua, R.
2004-01-01
SARNET project (Severe Accident Research Network) has also the target to involve Ph.D. students and researches in the education and training elements of ASTEC development. And in this framework ASTEC should show a very good capability for being used as an investigative tool as well as an educational and training tool. In this paper, ASTECv0.3 is compared to MELCOR and CONTAIN codes in order to show the high degree of confidence which can be already placed in the ASTEC tool.(author)
International Nuclear Information System (INIS)
Ha, Kwang Soon; Kim, Sung Il; Jang, Jin Sung; Kim, Dong Ha
2016-01-01
The gas and aerosol phases of the radioactive materials move through the reactor coolant systems and containments as loaded on the carrier gas or liquid, such as steam or water. Most radioactive materials might escape in the form of aerosols from a nuclear power plant during a severe reactor accident, and it is very important to predict the behavior of these radioactive aerosols in the reactor cooling system and in the containment building under severe accident conditions. Aerosols are designated as very small solid particles or liquid droplets suspended in a gas phase. The suspended solid or liquid particles typically have a range of sizes of 0.01 m to 20 m. Aerosol concentrations in reactor accident analyses are typically less than 100 g/m3 and usually less than 1 g/m3. When there are continuing sources of aerosol to the gas phase or when there are complicated processes involving engineered safety features, much more complicated size distributions develop. It is not uncommon for aerosols in reactor containments to have bimodal size distributions for at least some significant periods of time early during an accident. Salient features of aerosol physics under reactor accident conditions that will affect the nature of the aerosols are (1) the formation of aerosol particles, (2) growth of aerosol particles, (3) shape of aerosol particles. At KAERI, a fission product module has been developed to predict the behaviors of the radioactive materials in the reactor coolant system under severe accident conditions. The fission product module consists of an estimation of the initial inventories, species release from the core, aerosol generation, gas transport, and aerosol transport. The final outcomes of the fission product module designate the radioactive gas and aerosol distribution in the reactor coolant system. The aerosol sedimentation models in the fission product module were validated using ABCOVE and LACE experiments. There were some discrepancies on the predicted
Energy Technology Data Exchange (ETDEWEB)
Ha, Kwang Soon; Kim, Sung Il; Jang, Jin Sung; Kim, Dong Ha [KAERI, Daejeon (Korea, Republic of)
2016-05-15
The gas and aerosol phases of the radioactive materials move through the reactor coolant systems and containments as loaded on the carrier gas or liquid, such as steam or water. Most radioactive materials might escape in the form of aerosols from a nuclear power plant during a severe reactor accident, and it is very important to predict the behavior of these radioactive aerosols in the reactor cooling system and in the containment building under severe accident conditions. Aerosols are designated as very small solid particles or liquid droplets suspended in a gas phase. The suspended solid or liquid particles typically have a range of sizes of 0.01 m to 20 m. Aerosol concentrations in reactor accident analyses are typically less than 100 g/m3 and usually less than 1 g/m3. When there are continuing sources of aerosol to the gas phase or when there are complicated processes involving engineered safety features, much more complicated size distributions develop. It is not uncommon for aerosols in reactor containments to have bimodal size distributions for at least some significant periods of time early during an accident. Salient features of aerosol physics under reactor accident conditions that will affect the nature of the aerosols are (1) the formation of aerosol particles, (2) growth of aerosol particles, (3) shape of aerosol particles. At KAERI, a fission product module has been developed to predict the behaviors of the radioactive materials in the reactor coolant system under severe accident conditions. The fission product module consists of an estimation of the initial inventories, species release from the core, aerosol generation, gas transport, and aerosol transport. The final outcomes of the fission product module designate the radioactive gas and aerosol distribution in the reactor coolant system. The aerosol sedimentation models in the fission product module were validated using ABCOVE and LACE experiments. There were some discrepancies on the predicted
Graphite Oxidation Simulation in HTR Accident Conditions
Energy Technology Data Exchange (ETDEWEB)
El-Genk, Mohamed
2012-10-19
Massive air and water ingress, following a pipe break or leak in steam-generator tubes, is a design-basis accident for high-temperature reactors (HTRs). Analysis of these accidents in both prismatic and pebble bed HTRs requires state-of-the-art capability for predictions of: 1) oxidation kinetics, 2) air helium gas mixture stratification and diffusion into the core following the depressurization, 3) transport of multi-species gas mixture, and 4) graphite corrosion. This project will develop a multi-dimensional, comprehensive oxidation kinetics model of graphite in HTRs, with diverse capabilities for handling different flow regimes. The chemical kinetics/multi-species transport model for graphite burning and oxidation will account for temperature-related changes in the properties of graphite, oxidants (O2, H2O, CO), reaction products (CO, CO2, H2, CH4) and other gases in the mixture (He and N2). The model will treat the oxidation and corrosion of graphite in geometries representative of HTR core component at temperatures of 900°C or higher. The developed chemical reaction kinetics model will be user-friendly for coupling to full core analysis codes such as MELCOR and RELAP, as well as computational fluid dynamics (CFD) codes such as CD-adapco. The research team will solve governing equations for the multi-dimensional flow and the chemical reactions and kinetics using Simulink, an extension of the MATLAB solver, and will validate and benchmark the model's predictions using reported experimental data. Researchers will develop an interface to couple the validated model to a commercially available CFD fluid flow and thermal-hydraulic model of the reactor , and will perform a simulation of a pipe break in a prismatic core HTR, with the potential for future application to a pebble-bed type HTR.
Severe accident simulation and analysis for a CAREM-like integral nuclear reactor: ex-vessel phase
International Nuclear Information System (INIS)
Caputo, M.; García, J.M.; Giménez, M.; Sánchez, S.
2013-01-01
The main phenomena and processes involved in the progression of a hypothetical nuclear severe accident in an integral type reactor like CAREM are studied, quantifying the most relevant parameters, in order to contribute to the plant design and the development of an appropriate severe accident management program. A computational plant model was developed using Melcor code, including the reactor pressure vessel and the containment. A loss of coolant accident caused by a double guillotine pipe break in the steam dome zone of the pressure vessel (1.5 inches diameter) was simulated. Along this work the analysis were focused in the containment dynamics. As a consequence of the postulated loss of coolant accident the water inventory boils off leading to the core uncovery and fuel heat-up. At high temperatures the zircaloy steam oxidation becomes relevant, with hydrogen generation as one of the reaction products. The hydrogen produced is release into the containment and the possibility of hydrogen combustion in presence of enough oxygen makes relevant the analysis of containment hydrogen distribution. It is assumed that there is not any hydrogen control system. Due to the postulated loss of coolant a big amount of steam and energy is released into the containment, with a consequent fast pressurization of the dry well which makes possible air and steam discharging into the wet well (suppression pool). At the beginning the flow discharged into the pool is mainly composed of air, a non-condensable gas that pressurizes the wet well. After most of the containment air is pushed into the atmosphere wet well the pressurization rate decreases because the flow discharge is mainly composed by steam, which condensates in the pool. Also some other containment pressure peaks were observed as a consequence of hydrogen deflagrations. (author)
Characteristics of debris in the lower head of a BWR in different severe accident scenarios
International Nuclear Information System (INIS)
Phung, Viet-Anh; Galushin, Sergey; Raub, Sebastian; Goronovski, Andrei; Villanueva, Walter; Kööp, Kaspar; Grishchenko, Dmitry; Kudinov, Pavel
2016-01-01
Highlights: • Station blackout scenario with delayed recovery of safety systems in a Nordic BWR is considered. • Genetic algorithm and random sampling methods are used to explore accident scenario domain. • Main groups of scenarios are identified. • Ranges and distributions of characteristics of debris bed in the lower head are determined. - Abstract: Nordic boiling water reactors (BWRs) adopt ex-vessel debris cooling to terminate severe accident progression. Core melt released from the vessel into a deep pool of water is expected to fragment and form a coolable debris bed. Characteristics of corium melt ejection from the vessel determine conditions for molten fuel–coolant interactions (FCI) and debris bed formation. Non-coolable debris bed or steam explosion can threaten containment integrity. Vessel failure and melt ejection mode are determined by the in-vessel accident progression. Characteristics (such as mass, composition, thermal properties, timing of relocation, and decay heat) of the debris bed formed in the process of core relocation into the vessel lower plenum define conditions for the debris reheating, remelting, melt-vessel structure interactions, vessel failure and melt release. Thus core degradation and relocation are important sources of uncertainty for the success of the ex-vessel accident mitigation strategy. The goal of this work is improve understanding how accident scenario parameters, such as timing of failure and recovery of different safety systems can affect characteristics of the debris in the lower plenum. Station blackout scenario with delayed power recovery in a Nordic BWR is considered using MELCOR code. The recovery timing and capacity of safety systems were varied using genetic algorithm (GA) and random sampling methods to identify two main groups of scenarios: with relatively small ( 100 tons) amount of relocated debris. The domains are separated by the transition regions, in which relatively small variations of the input
Characteristics of debris in the lower head of a BWR in different severe accident scenarios
Energy Technology Data Exchange (ETDEWEB)
Phung, Viet-Anh, E-mail: vaphung@kth.se; Galushin, Sergey, E-mail: galushin@kth.se; Raub, Sebastian, E-mail: raub@kth.se; Goronovski, Andrei, E-mail: andreig@kth.se; Villanueva, Walter, E-mail: walterv@kth.se; Kööp, Kaspar, E-mail: kaspar@safety.sci.kth.se; Grishchenko, Dmitry, E-mail: dmitry@safety.sci.kth.se; Kudinov, Pavel, E-mail: pavel@safety.sci.kth.se
2016-08-15
Highlights: • Station blackout scenario with delayed recovery of safety systems in a Nordic BWR is considered. • Genetic algorithm and random sampling methods are used to explore accident scenario domain. • Main groups of scenarios are identified. • Ranges and distributions of characteristics of debris bed in the lower head are determined. - Abstract: Nordic boiling water reactors (BWRs) adopt ex-vessel debris cooling to terminate severe accident progression. Core melt released from the vessel into a deep pool of water is expected to fragment and form a coolable debris bed. Characteristics of corium melt ejection from the vessel determine conditions for molten fuel–coolant interactions (FCI) and debris bed formation. Non-coolable debris bed or steam explosion can threaten containment integrity. Vessel failure and melt ejection mode are determined by the in-vessel accident progression. Characteristics (such as mass, composition, thermal properties, timing of relocation, and decay heat) of the debris bed formed in the process of core relocation into the vessel lower plenum define conditions for the debris reheating, remelting, melt-vessel structure interactions, vessel failure and melt release. Thus core degradation and relocation are important sources of uncertainty for the success of the ex-vessel accident mitigation strategy. The goal of this work is improve understanding how accident scenario parameters, such as timing of failure and recovery of different safety systems can affect characteristics of the debris in the lower plenum. Station blackout scenario with delayed power recovery in a Nordic BWR is considered using MELCOR code. The recovery timing and capacity of safety systems were varied using genetic algorithm (GA) and random sampling methods to identify two main groups of scenarios: with relatively small (<20 tons) and large (>100 tons) amount of relocated debris. The domains are separated by the transition regions, in which relatively small
Study on risk insight for additional ILRT interval extension
International Nuclear Information System (INIS)
Seo, M. R.; Hong, S. Y.; Kim, M. K.; Chung, B. S.; Oh, H. C.
2005-01-01
In U.S., the containment Integrated Leakage Rate Test (ILRT) interval was extended from 3 times per 10 years to once per 10 years based on NUREG-1493 'Performance-Based Containment Leak-Test Program' in 1995. In September, 2001, ILRT interval was extended up to once per 15 years based on Nuclear Energy Industry (NEI) provisional guidance 'Interim Guidance for Performing Risk Impact Assessments In Support of One-Time Extensions for Containment Integrated Leakage Rate Test Surveillance Intervals'. In Korea, the containment ILRT was performed with 5 year interval. But, in MOST(Ministry of Science and Technology) Notice 2004-15 'Standard for the Leak- Rate Test of the Nuclear Reactor Containment', the extension of the ILRT interval to once per 10 year can be allowed if some conditions are met. So, the safety analysis for the extension of Yonggwang Nuclear (YGN) Unit 1 and 2 ILRT interval extension to once per 10 years was completed based on the methodology in NUREG-1493. But, during review process by regulatory body, KINS, it was required that some various risk insight or index for risk analysis should be developed. So, we began to study NEI interim report for 15 year ILRT interval extension. As previous analysis based on NUREG-1493, MACCS II (MELCOR Accident Consequence Code System) computer code was used for the risk analysis of the population, and the population dose was selected as a reference index for the risk evaluation
Outline of the Desktop Severe Accident Graphic Simulator Module for OPR-1000
International Nuclear Information System (INIS)
Park, S. Y.; Ahn, K. I.
2015-01-01
This paper introduce the desktop severe accident graphic simulator module (VMAAP) which is a window-based severe accident simulator using MAAP as its engine. The VMAAP is one of the submodules in SAMEX system (Severe Accident Management Support Expert System) which is a decision support system for use in a severe accident management following an incident at a nuclear power plant. The SAMEX system consists of four major modules as sub-systems: (a) Severe accident risk data base module (SARDB): stores the data of integrated severe accident analysis code results like MAAP and MELCOR for hundreds of high frequency scenarios for the reference plant; (b) Risk-informed severe accident risk data base management module (RI-SARD): provides a platform to identify the initiating event, determine plant status and equipment availability, diagnoses the status of the reactor core, reactor vessel and containment building, and predicts the plant behaviors; (c) Severe accident management simulator module (VMAAP): runs the MAAP4 code with user friendly graphic interface for input deck and output display; (d) On-line severe accident management guidance module (On-line SAMG); provides available accident management strategies with an electronic format. The role of VMAAP in SAMEX can be described as followings. SARDB contains the most of high frequency scenarios based on a level 2 probabilistic safety analysis. Therefore, there is good chance that a real accident sequence is similar to one of the data base cases. In such a case, RI-SARD can predict an accident progression by a scenario-base or symptom-base search depends on the available plant parameter information. Nevertheless, there still may be deviations or variations between the actual scenario and the data base scenario. The deviations can be decreased by using a real-time graphic accident simulator, VMAAP.. VMAAP is a MAAP4-based severe accident simulation model for OPR-1000 plant. It can simulate spectrum of physical processes
Outline of the Desktop Severe Accident Graphic Simulator Module for OPR-1000
Energy Technology Data Exchange (ETDEWEB)
Park, S. Y.; Ahn, K. I. [KAERI, Daejeon (Korea, Republic of)
2015-05-15
This paper introduce the desktop severe accident graphic simulator module (VMAAP) which is a window-based severe accident simulator using MAAP as its engine. The VMAAP is one of the submodules in SAMEX system (Severe Accident Management Support Expert System) which is a decision support system for use in a severe accident management following an incident at a nuclear power plant. The SAMEX system consists of four major modules as sub-systems: (a) Severe accident risk data base module (SARDB): stores the data of integrated severe accident analysis code results like MAAP and MELCOR for hundreds of high frequency scenarios for the reference plant; (b) Risk-informed severe accident risk data base management module (RI-SARD): provides a platform to identify the initiating event, determine plant status and equipment availability, diagnoses the status of the reactor core, reactor vessel and containment building, and predicts the plant behaviors; (c) Severe accident management simulator module (VMAAP): runs the MAAP4 code with user friendly graphic interface for input deck and output display; (d) On-line severe accident management guidance module (On-line SAMG); provides available accident management strategies with an electronic format. The role of VMAAP in SAMEX can be described as followings. SARDB contains the most of high frequency scenarios based on a level 2 probabilistic safety analysis. Therefore, there is good chance that a real accident sequence is similar to one of the data base cases. In such a case, RI-SARD can predict an accident progression by a scenario-base or symptom-base search depends on the available plant parameter information. Nevertheless, there still may be deviations or variations between the actual scenario and the data base scenario. The deviations can be decreased by using a real-time graphic accident simulator, VMAAP.. VMAAP is a MAAP4-based severe accident simulation model for OPR-1000 plant. It can simulate spectrum of physical processes
International Nuclear Information System (INIS)
Perrissin Fabert, Baptiste; Foussard, Alexis
2016-11-01
The objective to divide greenhouse gas emissions in France by a factor four by 2050 implies the mobilisation at the lowest cost of the whole set of known sources of reduction of emissions in all economic sectors. In this context, this report is based on a methodology (D-CAM in French for dynamics - average abatement costs, MACC in English for Medium Abatement Cost Curves) which relies on a theoretical business-as-usual scenario, on a database on the potential, rate of development, and cost of mobilizable sources, and on a dynamic model of cost minimisation. The MACC tool is used to explore, for each sector, scenarios of de-carbonation which allow objectives of reduction of greenhouse gas emissions to be reached at different time horizons. An aggregated approach of this tool modifies the distribution of efforts of emission reduction between sectors with respect to a sector-based approach. Thus, a macro-assessment of low carbon transition does not reveal any obvious over-cost with respect to the business-as-usual scenario. A second document is a Power Point presentation which contains the same information, curves and graphs
PSA Level 2 as element of an integral safety assessment before plant commissioning
International Nuclear Information System (INIS)
Loeffler, H.; Mildenberger, O.; Sonnenkalb, M.; Steinroetter, T.
2012-01-01
In Argentina the Central Nuclear Atucha II is near to completion. This is a pressurized heavy water reactor. PSA (Probability Safety Assessment) level 1, level 2 and level 3 have to be performed in order to show compliance with the Argentinean dose limit. Such studies have been done first by the former KWU in the 1980's to get the construction license (FABIAN 1985). Nowadays the plant owner NA-SA performs PSA level 1 and provides information about the core damage states to GRS, who does the subsequent PSA level 2 part. GRS delivers source terms to the environment and the associated frequencies to the Argentinean research institute CNEA, which performs level 3 together with NA-SA. Since GRS is situated in the middle of the chain, interface definition with both ends has been a significant task of the GRS activities. Experience gained during this process will be highlighted in the presentation. The analysis of PSA level 2 proper follows a traditional approach: -) deterministic accident simulation with integral code MELCOR; -) analyses of specific issues which are not covered by MELCOR; and -) probabilistic accident progression analysis with EVNTRE event tree methodology. It appears that MELCOR and EVNTRE and PSA guidelines in general are flexible enough to analyse new or uncommon reactor designs. It also appears that the plant specific design features may require analyses beyond present code capabilities, calling for expert judgment and they can largely determine PSA results. The behaviour of iodine is not yet covered satisfactorily by state-of-the-art models in MELCOR
International Nuclear Information System (INIS)
Park, Sang Gil; Kim, Han Chul
2012-01-01
In order to analyze severe accident phenomena, Korea Institute of Nuclear Safety (KINS) made a MELCOR model for APR1400 to examine natural circulation and creep rupture failure in the Reactor Coolant System (RCS) under station blackout (SBO). In this study, we are trying to advance the former model to describe natural circulation more accurately. After Fukushima accident, the concerns of severe accident management, assuring the heat removal capability, has risen for the case when the SBO is happened and there are no more electric powers to cool down decay heat. Under SBO there are three kinds of natural circulation which can delay the core heatup. One is in vessel natural circulation in the upper plenum of reactor vessel and the second is countercurrent natural circulation in hot leg through steam generator tubes and the last is full loop natural circulation when the reactor coolant pump loop seal is cleared and reactor coolant pump sealing is damaged by high temperature and high pressure. Among them this study focuses on the countercurrent natural circulation model using MELCOR1.8.6
Nuclear power reactor core melt accidents. Current State of Knowledge
International Nuclear Information System (INIS)
Jacquemain, Didier; Cenerino, Gerard; Corenwinder, Francois; Raimond, Emmanuel IRSN; Bentaib, Ahmed; Bonneville, Herve; Clement, Bernard; Cranga, Michel; Fichot, Florian; Koundy, Vincent; Meignen, Renaud; Corenwinder, Francois; Leteinturier, Denis; Monroig, Frederique; Nahas, Georges; Pichereau, Frederique; Van-Dorsselaere, Jean-Pierre; Couturier, Jean; Debaudringhien, Cecile; Duprat, Anna; Dupuy, Patricia; Evrard, Jean-Michel; Nicaise, Gregory; Berthoud, Georges; Studer, Etienne; Boulaud, Denis; Chaumont, Bernard; Clement, Bernard; Gonzalez, Richard; Queniart, Daniel; Peltier, Jean; Goue, Georges; Lefevre, Odile; Marano, Sandrine; Gobin, Jean-Dominique; Schwarz, Michel; Repussard, Jacques; Haste, Tim; Ducros, Gerard; Journeau, Christophe; Magallon, Daniel; Seiler, Jean-Marie; Tourniaire, Bruno; Durin, Michel; Andreo, Francois; Atkhen, Kresna; Daguse, Thierry; Dubreuil-Chambardel, Alain; Kappler, Francois; Labadie, Gerard; Schumm, Andreas; Gauntt, Randall O.; Birchley, Jonathan
2015-11-01
For over thirty years, IPSN and subsequently IRSN has played a major international role in the field of nuclear power reactor core melt accidents through the undertaking of important experimental programmes (the most significant being the Phebus-FP programme), the development of validated simulation tools (the ASTEC code that is today the leading European tool for modelling severe accidents), and the coordination of the SARNET (Severe Accident Research Network) international network of excellence. These accidents are described as 'severe accidents' because they can lead to radioactive releases outside the plant concerned, with serious consequences for the general public and for the environment. This book compiles the sum of the knowledge acquired on this subject and summarises the lessons that have been learnt from severe accidents around the world for the prevention and reduction of the consequences of such accidents, without addressing those from the Fukushima accident, where knowledge of events is still evolving. The knowledge accumulated by the Institute on these subjects enabled it to play an active role in informing public authorities, the media and the public when this accident occurred, and continues to do so to this day. Following the introduction, which describes the structure of this book and highlights the objectives of R and D on core melt accidents, this book briefly presents the design and operating principles (Chapter 2) and safety principles (Chapter 3) of the reactors currently in operation in France, as well as the main accident scenarios envisaged and studied (Chapter 4). The objective of these chapters is not to provide exhaustive information on these subjects (the reader should refer to the general reference documents listed in the corresponding chapters), but instead to provide the information needed in order to understand, firstly, the general approach adopted in France for preventing and mitigating the consequences of core melt
A restructuring of the FL package for the MIDAS computer code
International Nuclear Information System (INIS)
Park, S. H.; Kim, K. R.; Kim, D. H.; Cho, S. W.
2005-01-01
The developmental need for a localized severe accident analysis code is on the rise, and KAERI is developing a severe accident code MIDAS, based on MELCOR. The existing data saving method uses pointer variables for a fix-sized storage management, and it deteriorates the readability, maintainability and portability of the code. But new features in FORTRAN90 such as a dynamic allocation have been used for the restructuring. The restructuring of the data saving and transferring method of the existing code makes it easy to understand the code. Before an entire restructuring of the code, a restructuring template for a simple package was developed and tested. The target for the restructuring was the FL package which is responsible for modeling the thermal-hydraulic behavior of a liquid water, water vapor, and gases in MELCOR with the CVH package. The verification was done through comparing the results before and after the restructuring
Energy Technology Data Exchange (ETDEWEB)
Loeffler, Horst; Kowalik, Michael; Mildenberger, Oliver; Hage, Michael
2016-06-15
The work which is documented here provides the methodological basis for improvement of the state of knowledge for accident sequences after plant external initiating events and for accident sequences which begin in the shutdown state. The analyses have been done for a PWR and for a BWR reference plant. The work has been supported by the German federal ministry BMUB under the label 3612R01361. Top objectives of the work are: - Identify relevant event sequences in order to define characteristic initial and boundary conditions - Perform accident analysis of selected sequences - Evaluate the relevance of accident sequences in a qualitative way The accident analysis is performed with the code MELCOR 1.8.6. The applied input data set has been significantly improved compared to previous analyses. The event tree method which is established in PSA level 2 has been applied for creating a structure for a unified summarization and evaluation of the results from the accident analyses. The computer code EVNTRE has been applied for this purpose. In contrast to a PSA level 2, the branching probabilities of the event tree have not been determined with the usual accuracy, but they are given in an approximate way only. For the PWR, the analyses show a considerable protective effect of the containment also in the case of beyond design events. For the BWR, there is a rather high probability for containment failure under core melt impact, but nevertheless the release of radionuclides into the environment is very limited because of plant internal retention mechanisms. This report concludes with remarks about existing knowledge gaps and with regard to core melt sequences, and about possible improvements of the plant safety.
Methodology Using MELCOR Code to Model Proposed Hazard Scenario
Energy Technology Data Exchange (ETDEWEB)
Gavin Hawkley
2010-07-01
This study demonstrates a methodology for using the MELCOR code to model a proposed hazard scenario within a building containing radioactive powder, and the subsequent evaluation of a leak path factor (LPF) (or the amount of respirable material which that escapes a facility into the outside environment), implicit in the scenario. This LPF evaluation will analyzes the basis and applicability of an assumed standard multiplication of 0.5 × 0.5 (in which 0.5 represents the amount of material assumed to leave one area and enter another), for calculating an LPF value. The outside release is dependsent upon the ventilation/filtration system, both filtered and un-filtered, and from other pathways from the building, such as doorways (, both open and closed). This study is presents ed to show how the multiple leak path factorsLPFs from the interior building can be evaluated in a combinatory process in which a total leak path factorLPF is calculated, thus addressing the assumed multiplication, and allowing for the designation and assessment of a respirable source term (ST) for later consequence analysis, in which: the propagation of material released into the environmental atmosphere can be modeled and the dose received by a receptor placed downwind can be estimated and the distance adjusted to maintains such exposures as low as reasonably achievableALARA.. Also, this study will briefly addresses particle characteristics thatwhich affect atmospheric particle dispersion, and compares this dispersion with leak path factorLPF methodology.
Accidents - Chernobyl accident; Accidents - accident de Tchernobyl
Energy Technology Data Exchange (ETDEWEB)
NONE
2004-07-01
This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)
CONTAIN calculations; CONTAIN-Rechnungen
Energy Technology Data Exchange (ETDEWEB)
Scholtyssek, W.
1995-08-01
In the first phase of a benchmark comparison, the CONTAIN code was used to calculate an assumed EPR accident `medium-sized leak in the cold leg`, especially for the first two days after initiation of the accident. The results for global characteristics compare well with those of FIPLOC, MELCOR and WAVCO calculations, if the same materials data are used as input. However, significant differences show up for local quantities such as flows through leakages. (orig.)
International Nuclear Information System (INIS)
Scholtyssek, W.
1995-01-01
In the first phase of a benchmark comparison, the CONTAIN code was used to calculate an assumed EPR accident 'medium-sized leak in the cold leg', especially for the first two days after initiation of the accident. The results for global characteristics compare well with those of FIPLOC, MELCOR and WAVCO calculations, if the same materials data are used as input. However, significant differences show up for local quantities such as flows through leakages. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Brown, J. [National Radiological Protection Board (United Kingdom); Goossens, L.H.J.; Kraan, B.C.P. [Delft Univ. of Technology (Netherlands)] [and others
1997-06-01
This volume is the second of a two-volume document that summarizes a joint project by the US Nuclear Regulatory and the Commission of European Communities to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This two-volume report, which examines mechanisms and uncertainties of transfer through the food chain, is the first in a series of five such reports. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain transfer that affect calculations of offsite radiological consequences. Seven of the experts reported on transfer into the food chain through soil and plants, nine reported on transfer via food products from animals, and two reported on both. The expert judgment elicitation procedure and its outcomes are described in these volumes. This volume contains seven appendices. Appendix A presents a brief discussion of the MAACS and COSYMA model codes. Appendix B is the structure document and elicitation questionnaire for the expert panel on soils and plants. Appendix C presents the rationales and responses of each of the members of the soils and plants expert panel. Appendix D is the structure document and elicitation questionnaire for the expert panel on animal transfer. The rationales and responses of each of the experts on animal transfer are given in Appendix E. Brief biographies of the food chain expert panel members are provided in Appendix F. Aggregated results of expert responses are presented in graph format in Appendix G.
International Nuclear Information System (INIS)
Brown, J.; Goossens, L.H.J.; Kraan, B.C.P.
1997-06-01
This volume is the second of a two-volume document that summarizes a joint project by the US Nuclear Regulatory and the Commission of European Communities to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This two-volume report, which examines mechanisms and uncertainties of transfer through the food chain, is the first in a series of five such reports. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain transfer that affect calculations of offsite radiological consequences. Seven of the experts reported on transfer into the food chain through soil and plants, nine reported on transfer via food products from animals, and two reported on both. The expert judgment elicitation procedure and its outcomes are described in these volumes. This volume contains seven appendices. Appendix A presents a brief discussion of the MAACS and COSYMA model codes. Appendix B is the structure document and elicitation questionnaire for the expert panel on soils and plants. Appendix C presents the rationales and responses of each of the members of the soils and plants expert panel. Appendix D is the structure document and elicitation questionnaire for the expert panel on animal transfer. The rationales and responses of each of the experts on animal transfer are given in Appendix E. Brief biographies of the food chain expert panel members are provided in Appendix F. Aggregated results of expert responses are presented in graph format in Appendix G
MIDAS/PK code development using point kinetics model
International Nuclear Information System (INIS)
Song, Y. M.; Park, S. H.
1999-01-01
In this study, a MIDAS/PK code has been developed for analyzing the ATWS (Anticipated Transients Without Scram) which can be one of severe accident initiating events. The MIDAS is an integrated computer code based on the MELCOR code to develop a severe accident risk reduction strategy by Korea Atomic Energy Research Institute. In the mean time, the Chexal-Layman correlation in the current MELCOR, which was developed under a BWR condition, is appeared to be inappropriate for a PWR. So as to provide ATWS analysis capability to the MIDAS code, a point kinetics module, PKINETIC, has first been developed as a stand-alone code whose reference model was selected from the current accident analysis codes. In the next step, the MIDAS/PK code has been developed via coupling PKINETIC with the MIDAS code by inter-connecting several thermal hydraulic parameters between the two codes. Since the major concern in the ATWS analysis is the primary peak pressure during the early few minutes into the accident, the peak pressure from the PKINETIC module and the MIDAS/PK are compared with the RETRAN calculations showing a good agreement between them. The MIDAS/PK code is considered to be valuable for analyzing the plant response during ATWS deterministically, especially for the early domestic Westinghouse plants which rely on the operator procedure instead of an AMSAC (ATWS Mitigating System Actuation Circuitry) against ATWS. This capability of ATWS analysis is also important from the view point of accident management and mitigation
Sensitivity analysis on the zirconium ignition in a postulated SFP loss of coolant accident
International Nuclear Information System (INIS)
Park, Sanggil; Lee, Jaeyoung; Kim, Sun-ki; Chun, Tae-hyun; Bang, Je-geon
2016-01-01
From both SFP complete LOCA experiments, it was observed that zirconium alloy cladding temperature was abruptly increased at a certain point and the cladding was almost fully oxidized. To capture this phenomenon, the concept of air oxidation breakaway model was adopted in MELCOR code. This paper examines this air oxidation breakaway model by comparing the SFP project test data and MELCOR code calculation results by using this model. The air oxidation model parameters are slightly altered to see their sensitivities on the occurrence of the zirconium ignition. Through such sensitivity analysis, limitations of the air oxidation breakaway model are revealed in comparison to the actual zirconium ignition phenomenon during air ingress scenarios. In addition, ways to overcome the identified limitations of the air oxidation model are recommended to estimate better the zirconium ignition phenomenon in SFP sequences. In this paper, the zirconium ignition phenomenon was reviewed and the model to capture this phenomenon was investigated. The model is the air oxidation breakaway model in MELCOR code, and its sensitivity of the model parameters on the time to ignition was studied. From the sensitivity analysis, the slight change of model parameters induce the large variation of the time to ignition. The model itself includes its weakness to fully represent both the air oxidation breakaway phenomenon and the followed zirconium ignition behavior. Furthermore, this model considers no effect of N2 on the cladding degradation and its promoted exothermic heat release
Sensitivity analysis on the zirconium ignition in a postulated SFP loss of coolant accident
Energy Technology Data Exchange (ETDEWEB)
Park, Sanggil; Lee, Jaeyoung [Handong Global Univ., Pohang (Korea, Republic of); Kim, Sun-ki; Chun, Tae-hyun; Bang, Je-geon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2016-10-15
From both SFP complete LOCA experiments, it was observed that zirconium alloy cladding temperature was abruptly increased at a certain point and the cladding was almost fully oxidized. To capture this phenomenon, the concept of air oxidation breakaway model was adopted in MELCOR code. This paper examines this air oxidation breakaway model by comparing the SFP project test data and MELCOR code calculation results by using this model. The air oxidation model parameters are slightly altered to see their sensitivities on the occurrence of the zirconium ignition. Through such sensitivity analysis, limitations of the air oxidation breakaway model are revealed in comparison to the actual zirconium ignition phenomenon during air ingress scenarios. In addition, ways to overcome the identified limitations of the air oxidation model are recommended to estimate better the zirconium ignition phenomenon in SFP sequences. In this paper, the zirconium ignition phenomenon was reviewed and the model to capture this phenomenon was investigated. The model is the air oxidation breakaway model in MELCOR code, and its sensitivity of the model parameters on the time to ignition was studied. From the sensitivity analysis, the slight change of model parameters induce the large variation of the time to ignition. The model itself includes its weakness to fully represent both the air oxidation breakaway phenomenon and the followed zirconium ignition behavior. Furthermore, this model considers no effect of N2 on the cladding degradation and its promoted exothermic heat release.
International assessment of PCA codes
International Nuclear Information System (INIS)
Neymotin, L.; Lui, C.; Glynn, J.; Archarya, S.
1993-11-01
Over the past three years (1991-1993), an extensive international exercise for intercomparison of a group of six Probabilistic Consequence Assessment (PCA) codes was undertaken. The exercise was jointly sponsored by the Commission of European Communities (CEC) and OECD Nuclear Energy Agency. This exercise was a logical continuation of a similar effort undertaken by OECD/NEA/CSNI in 1979-1981. The PCA codes are currently used by different countries for predicting radiological health and economic consequences of severe accidents at nuclear power plants (and certain types of non-reactor nuclear facilities) resulting in releases of radioactive materials into the atmosphere. The codes participating in the exercise were: ARANO (Finland), CONDOR (UK), COSYMA (CEC), LENA (Sweden), MACCS (USA), and OSCAAR (Japan). In parallel with this inter-code comparison effort, two separate groups performed a similar set of calculations using two of the participating codes, MACCS and COSYMA. Results of the intercode and inter-MACCS comparisons are presented in this paper. The MACCS group included four participants: GREECE: Institute of Nuclear Technology and Radiation Protection, NCSR Demokritos; ITALY: ENEL, ENEA/DISP, and ENEA/NUC-RIN; SPAIN: Universidad Politecnica de Madrid (UPM) and Consejo de Seguridad Nuclear; USA: Brookhaven National Laboratory, US NRC and DOE
Advanced nuclear energy analysis technology
International Nuclear Information System (INIS)
Gauntt, Randall O.; Murata, Kenneth K.; Romero, Vicente Josce; Young, Michael Francis; Rochau, Gary Eugene
2004-01-01
A two-year effort focused on applying ASCI technology developed for the analysis of weapons systems to the state-of-the-art accident analysis of a nuclear reactor system was proposed. The Sandia SIERRA parallel computing platform for ASCI codes includes high-fidelity thermal, fluids, and structural codes whose coupling through SIERRA can be specifically tailored to the particular problem at hand to analyze complex multiphysics problems. Presently, however, the suite lacks several physics modules unique to the analysis of nuclear reactors. The NRC MELCOR code, not presently part of SIERRA, was developed to analyze severe accidents in present-technology reactor systems. We attempted to: (1) evaluate the SIERRA code suite for its current applicability to the analysis of next generation nuclear reactors, and the feasibility of implementing MELCOR models into the SIERRA suite, (2) examine the possibility of augmenting ASCI codes or alternatives by coupling to the MELCOR code, or portions thereof, to address physics particular to nuclear reactor issues, especially those facing next generation reactor designs, and (3) apply the coupled code set to a demonstration problem involving a nuclear reactor system. We were successful in completing the first two in sufficient detail to determine that an extensive demonstration problem was not feasible at this time. In the future, completion of this research would demonstrate the feasibility of performing high fidelity and rapid analyses of safety and design issues needed to support the development of next generation power reactor systems
Reactor Core Failure Analysis for Feasibility Study of IVR-ERVC Strategy
International Nuclear Information System (INIS)
Lim, Kukhee; Cho, Yongjin; Hwang, Taesuk
2014-01-01
The complicated physical phenomena in a reactor vessel under severe accident environments should be evaluated by effective cooling methods at the same time to satisfy thermal failure margin of the strategy. The reactor integrity by this margin criterion is guaranteed if the heat flux obtained by the analysis of heat balance equations between heat structures in a reactor vessel does not exceed the critical-heat-flux (CHF) limit for nucleate boiling on the vessel outer surface. This method assumes the layer configuration of molten pools (number of layers, thickness of layers and heat generation rate of molten corium, etc.) and evaluates representative states by a 1-dimensional heat transfer analysis. Boundary conditions of model should be well defined to increase accuracy of assessed heat flux and these are dependent on accident scenarios. Therefore, conservative assumptions or results from the analysis using system codes for accident analyses should be considered to determine boundary conditions. In this paper, in-vessel molten corium behaviors during LBLOCA which is considered as the most conservative accident scenario in IVR-ERVC design concerns are examined using MELCOR 1.8.6 to check the feasibility of APR1400 IVR-ERVC strategy. The relocated debris mass in the lower head of APR1400 reactor is analyzed using MELCOR1.8.6. This analysis is to determine the boundary conditions of the heat balance equations consisting of the lumped parameter method in order to calculate heat flux at external vessel wall surface. As a result, lower head vessel failure has been occurred at the time of about 7e3 which is very short time comparing with total period of ERVC process. Even though the effect of external vessel cooling is well-modeled, however, the differences between debris mass are relatively small. Therefore, the physical feasibility of the creep rupture model in MELCOR COR package should be verified for an adequate debris mass assessment in a reactor lower head under the
International Nuclear Information System (INIS)
Sevon, T.
2005-11-01
In a hypothetical severe accident in a nuclear power plant, the molten core of the reactor may flow onto the concrete floor of containment building. This would cause a molten core . concrete interaction (MCCI), in which the heat transfer from the hot melt to the concrete would cause melting of the concrete. In assessing the safety of nuclear reactors, it is important to know the consequences of such an interaction. As background to the subject, this publication includes a description of the core melt stabilization concept of the European Pressurized water Reactor (EPR), which is being built in Olkiluoto in Finland. The publication includes a description of the basic theory of the interaction and the process of spalling or cracking of concrete when it is heated rapidly. A literature survey and some calculations of the physical properties of concrete and corium. concrete mixtures at high temperatures have been conducted. In addition, an equation is derived for conservative calculation of the maximum possible concrete ablation depth. The publication also includes a literature survey of experimental research on the subject of the MCCI and discussion of the results and deficiencies of the experiments. The main result of this work is the general design of an experimental facility to examine the interaction of molten metals and concrete. The main objective of the experiments is to assess the probability of spalling, or cracking, of concrete under pouring of molten material. A program of five experiments has been designed, and pre-test calculations of the experiments have been conducted with MELCOR 1.8.5 accident analysis program and conservative analytic calculations. (orig.)
Accidents - Chernobyl accident
International Nuclear Information System (INIS)
2004-01-01
This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)
A Restructuring of the CAV and FDI Package for the MIDAS Computer Code
International Nuclear Information System (INIS)
Park, S. H.; Kim, D. H.; Cho, S. W.
2006-01-01
As one of the processes for a localized severe accident analysis code, KAERI is developing a severe accident code MIDAS. The MIDAS code is being developed based on MELCOR. The existing data saving method of MELCOR uses pointer variables for a fix-sized storage management, and it deteriorates the readability, maintainability and portability of the code. As a most important process for a localized severe accident analysis code, it is needed convenient method for data handling. So, it has been used the new features in FORTRAN90 such as a dynamic allocation for the restructuring. The restructuring of the data saving and transferring method of the existing code makes it easy to understand the code. Before an entire restructuring of the code, a restructuring template for a simple package was developed and tested. The target for the restructuring in this paper was the CAV and FDI packages. The CAV(cavity) package is responsible for modeling the attack on the basement concrete by hot core materials. The FDI(Fuel Dispersal Interactions) package is responsible for modeling both low and high pressure molten fuel ejection from the RPV into the reactor cavity, control volumes and surfaces. The verification was done through comparing the results before and after the restructuring
Scoping Study Investigating PWR Instrumentation during a Severe Accident Scenario
Energy Technology Data Exchange (ETDEWEB)
Rempe, J. L. [Rempe and Associates, LLC, Idaho Falls, ID (United States); Knudson, D. L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lutz, R. J. [Lutz Nuclear Safety Consultant, LLC, Asheville, NC (United States)
2015-09-01
The accidents at the Three Mile Island Unit 2 (TMI-2) and Fukushima Daiichi Units 1, 2, and 3 nuclear power plants demonstrate the critical importance of accurate, relevant, and timely information on the status of reactor systems during a severe accident. These events also highlight the critical importance of understanding and focusing on the key elements of system status information in an environment where operators may be overwhelmed with superfluous and sometimes conflicting data. While progress in these areas has been made since TMI-2, the events at Fukushima suggests that there may still be a potential need to ensure that critical plant information is available to plant operators. Recognizing the significant technical and economic challenges associated with plant modifications, it is important to focus on instrumentation that can address these information critical needs. As part of a program initiated by the Department of Energy, Office of Nuclear Energy (DOE-NE), a scoping effort was initiated to assess critical information needs identified for severe accident management and mitigation in commercial Light Water Reactors (LWRs), to quantify the environment instruments monitoring this data would have to survive, and to identify gaps where predicted environments exceed instrumentation qualification envelop (QE) limits. Results from the Pressurized Water Reactor (PWR) scoping evaluations are documented in this report. The PWR evaluations were limited in this scoping evaluation to quantifying the environmental conditions for an unmitigated Short-Term Station BlackOut (STSBO) sequence in one unit at the Surry nuclear power station. Results were obtained using the MELCOR models developed for the US Nuclear Regulatory Commission (NRC)-sponsored State of the Art Consequence Assessment (SOARCA) program project. Results from this scoping evaluation indicate that some instrumentation identified to provide critical information would be exposed to conditions that
Integrated analysis for a small break LOCA in the IRIS reactor using MELCOR and RELAP5 codes
International Nuclear Information System (INIS)
Del Nevo, A.; Manfredini, A.; Oriolo, F.; Paci, S.; Oriani, L.
2004-01-01
The pressurized light water cooled, medium power (1000 MWt) IRIS (International Reactor Innovative and Secure) has been under development for four years by an international consortium of over 21 organizations from ten countries. The plant conceptual design was completed in 2001 and the preliminary design is nearing completion. The pre-application licensing process with NRC started in October, 2002 and IRIS is one of the designs considered by US utilities as part of the ESP (Early Site Permit) process. This paper's focus is on the use of well known computer codes for integrated (reactor vessel and containment) calculations of the IRIS response to a small break loss of coolant accident (LOCA). In IRIS, large break LOCA events are eliminated by the use of a layout configuration in which the reactor vessel contains all the reactor coolant system components including the core, control rod drive mechanisms, pressurizer, steam generators, and coolant pumps. Thus the IRIS configuration has no large loop piping; also, no pipes with a diameter greater than 0.1 meters are part of the reactor coolant system boundary. For small break LOCAs, IRIS features an innovative mitigation approach that is based on maintaining coolant inventory rather than designing high and low pressure injection systems to provide makeup coolant to the reactor to maintain core cooling. The novel IRIS approach requires development of evaluation models that are different from those used for the current generation of pressurized water reactors. An analysis of small break LOCAs for IRIS is documented in two companion papers, and has been developed using a preliminary evaluation model based on the explicit coupling of the RELAP5 and GOTHIC codes. The objective of this paper is to compare the results obtained via the coupled RELAP/GOTHIC code with different computational tools. A reference case from the preliminary IRIS safety assessment was selected, and the same small break LOCA sequence is analyzed using
A restructuring of RN1 package for MIDAS computer code
International Nuclear Information System (INIS)
Park, S. H.; Kim, D. H.; Kim, K. R.
2003-01-01
RN1 package, which is one of two fission product-related packages in MELCOR, has been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and modernized data structure. To do this, data transferring methods of current MELCOR code are modified and adopted into the RN1 package. The data structure of the current MELCOR code using FORTRAN77 causes a difficult grasping of meaning of the variables as well as waste of memory. New features of FORTRAN90 make it possible to allocate the storage dynamically and to use the user-defined data type, which lead to an efficient memory treatment and an easy understanding of the code. Restructuring of the RN1 package addressed in this paper includes module development, subroutine modification, and treats MELGEN, which generates data file, as well as MELCOR, which is processing a calculation. The verification has been done by comparing the results of the modified code with those from the existing code. As the trends are similar to each other, it hints that the same approach could be extended to the entire code package. It is expected that code restructuring will accelerate the code domestication thanks to direct understanding of each variable and easy implementation of modified or newly developed models
A restructuring of RN2 package for MIDAS computer code
International Nuclear Information System (INIS)
Park, S. H.; Kim, D. H.
2003-01-01
RN2 package, which is one of two fission product-related package in MELCOR, has been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and data structure. To do this, data transferring methods of current MELCOR code are modified and adopted into the RN2 package. The data structure of the current MELCOR code using FORTRAN77 causes a difficult grasping of meaning of the variables as well as waste of memory. New features of FORTRAN90 make it possible to allocate the storage dynamically and to use the user-defined data type, which lead to an efficient memory treatment and an easy understanding of the code. Restructuring of the RN2 package addressed in this paper includes module development, subroutine modification, and treats MELGEN, which generates data file, as well as MELCOR, which is processing a calculation. The validation has been done by comparing the results of the modified code with those from the existing code. As the trends are the similar to each other, it hints that the same approach could be extended to the entire code package. It is expected that code restructuring will accelerate the code domestication thanks to direct understanding of each variable and easy implementation of modified or newly developed models
Developing a methodology for identifying correlations between LERF and early fatality
International Nuclear Information System (INIS)
Kang, Kyung Min; Jae, Moo Sung; Ahn, Kwang Il
2009-01-01
The correlations between Large Early Release Frequency (LERF) and Early Fatality need to be investigated for risk-informed application and regulation. In RG-1.174, there are decision-making criteria using the measures of CDF and LERF, while there are no specific criteria on LERF. Since there are both huge uncertainty and large cost need in off-site consequence calculation, a LERF assessment methodology need to be developed and its correlation factor needs to be identified for risk-informed decision-making. This regards, the robust method for estimating off-site consequence has been performed for assessing health effects caused by radioisotopes released from severe accidents of nuclear power plants. And also, MACCS2 code are used for validating source term quantitatively regarding health effects depending on release characteristics of radioisotopes during severe accidents has been performed. This study developed a method for identifying correlations between LERF and Early Fatality and validates the results of the model using MACCS2 code. The results of this study may contribute to defining LERF and finding a measure for risk-informed regulations and risk-informed decision making
International Nuclear Information System (INIS)
Dienstbier, J.
2006-06-01
The SOPHAEROS module of the ASTEC V1.2.1 code was used. The results are compared to those obtained by using the MELCOR 1.8.5 code. One case was also calculated where instead of being provided by other ASTEC modules, the input data for the SOPHAEROS module are taken over from the MELCOR results. Marked differences were observed between the results of the two codes, which can be only partially explained in terms of the different assumptions made in them. The deposition profiles along the primary piping, however, are similar in the two codes
Directory of Open Access Journals (Sweden)
M. Schroedter-Homscheidt
2017-02-01
Full Text Available The successful electricity grid integration of solar energy into day-ahead markets requires at least hourly resolved 48 h forecasts. Technologies as photovoltaics and non-concentrating solar thermal technologies make use of global horizontal irradiance (GHI forecasts, while all concentrating technologies both from the photovoltaic and the thermal sector require direct normal irradiances (DNI. The European Centre for Medium-Range Weather Forecasts (ECMWF has recently changed towards providing direct as well as global irradiances. Additionally, the MACC (Monitoring Atmospheric Composition & Climate near-real time services provide daily analysis and forecasts of aerosol properties in preparation of the upcoming European Copernicus programme. The operational ECMWF/IFS (Integrated Forecast System forecast system will in the medium term profit from the Copernicus service aerosol forecasts. Therefore, within the MACC‑II project specific experiment runs were performed allowing for the assessment of the performance gain of these potential future capabilities. Also the potential impact of providing forecasts with hourly output resolution compared to three-hourly resolved forecasts is investigated. The inclusion of the new aerosol climatology in October 2003 improved both the GHI and DNI forecasts remarkably, while the change towards a new radiation scheme in 2007 only had minor and partly even unfavourable impacts on the performance indicators. For GHI, larger RMSE (root mean square error values are found for broken/overcast conditions than for scattered cloud fields. For DNI, the findings are opposite with larger RMSE values for scattered clouds compared to overcast/broken cloud situations. The introduction of direct irradiances as an output parameter in the operational IFS version has not resulted in a general performance improvement with respect to biases and RMSE compared to the widely used Skartveit et al. (1998 global to direct irradiance
In-Plant Fission Product Behavior in SGTR Accident with Long-Term SBO
Energy Technology Data Exchange (ETDEWEB)
Kim, Tae Woon; Han, Seok Jung; Ahn, Kwang Il [KAERI, Daejeon (Korea, Republic of)
2015-05-15
, secondary cooling and safety injection strategy of RCS. Particularly, the isolation failure provides release path of radiological source term to the environment. With the given scenarios, in-plant fission product behaviors are estimated by using MELCOR code version 1.8.6. It is necessary to study a more detailed SGTR considering its importance in the consequential effects, but there are a few of knowledge bases of radiological source term behaviors during SGTR. SGTR scenario for Surry plant treated in SOARCA project presented much reduced release amounts of source term than previous accident source term study results (TID-14844, NUREG-1465, NUREG-0956, etc.). The release of major radioactive materials (Iodine and Cesium) were estimated as about 80% of Iodine and about 21% of Cesium of total core inventories release to environment in this study. The reason of Iodine release fraction to environment (80%) is much greater than Cesium release fraction to environment (21%) is that 67% of Cesium retained in RPV while only 1.4% of Iodine retained in RPV.
Accident management for severe accidents
International Nuclear Information System (INIS)
Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.
1988-01-01
The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs
International Nuclear Information System (INIS)
Kim, S.H.; Taleyarkhan, R.P.; Georgevich, V.
1992-10-01
This paper discusses salient aspects of methodology, assumptions, and modeling of various features related to estimation of source terms from two conservatively scoped severe accident scenarios in the Advanced Neutron Source (ANS) reactor at the Oak Ridge National Laboratory. Various containment configurations are considered for steaming-pool-type accidents and an accident involving molten core-concrete interaction. Several design features (such as rupture disks) are examined to study containment response during postulated severe accidents. Also, thermal-hydraulic response of the containment and radionuclide transport and retention in the containment are studied. The results are described as transient variations of source terms for each scenario, which are to be used for studying off-site radiological consequences and health effects for these postulated severe accidents. Also highlighted will be a comparison of source terms estimated by two different versions of the MELCOR code
International Nuclear Information System (INIS)
Ullrich, W.
1980-01-01
This lecture on 'Postulated Accidents' is the first of a series of lectures on the dynamic and transient behaviour of nuclear power plants, especially pressurized water reactors. The main points covered will be: Reactivity Accidents, Transients (Intact Loop) and Loss of Cooland Accidents (LOCA) including small leak. This lecture will discuss the accident analysis in general, the definition of the various operational phases, the accident classification, and, as an example, an accident sequence analysis on the basis of 'Postulated Accidents'. (orig./RW)
International Nuclear Information System (INIS)
Lutz, R.J.; Monty, B.S.; Liparulo, N.J.; Desaedeleer, G.
1989-01-01
The foundation of the framework for a Severe Accident Management Program is the contained in the Probabilistic Safety Study (PSS) or the Individual Plant Evaluations (IPE) for a specific plant. The development of a Severe Accident Management Program at a plant is based on the use of the information, in conjunction with other applicable information. A Severe Accident Management Program must address both accident prevention and accident mitigation. The overall Severe Accident Management framework must address these two facets, as a living program in terms of gathering the evaluating information, the readiness to respond to an event. Significant international experience in the development of severe accident management programs exist which should provide some direction for the development of Severe Accident Management in the U.S. This paper reports that the two most important elements of a Severe Accident Management Program are the Emergency Consultation process and the standards for measuring the effectiveness of individual Severe Accident Management Programs at utilities
Evaluation of atmospheric dispersion/consequence models supporting safety analysis
International Nuclear Information System (INIS)
O'Kula, K.R.; Lazaro, M.A.; Woodard, K.
1996-01-01
Two DOE Working Groups have completed evaluation of accident phenomenology and consequence methodologies used to support DOE facility safety documentation. The independent evaluations each concluded that no one computer model adequately addresses all accident and atmospheric release conditions. MACCS2, MATHEW/ADPIC, TRAC RA/HA, and COSYMA are adequate for most radiological dispersion and consequence needs. ALOHA, DEGADIS, HGSYSTEM, TSCREEN, and SLAB are recommended for chemical dispersion and consequence applications. Additional work is suggested, principally in evaluation of new models, targeting certain models for continued development, training, and establishing a Web page for guidance to safety analysts
Thermal-hydraulic code selection for modular high temperature gas-cooled reactors
Energy Technology Data Exchange (ETDEWEB)
Komen, E M.J.; Bogaard, J.P.A. van den
1995-06-01
In order to study the transient thermal-hydraulic system behaviour of modular high temperature gas-cooled reactors, the thermal-hydraulic computer codes RELAP5, MELCOR, THATCH, MORECA, and VSOP are considered at the Netherlands Energy Research Foundation ECN. This report presents the selection of the most appropriate codes. To cover the range of relevant accidents, a suite of three codes is recommended for analyses of HTR-M and MHTGR reactors. (orig.).
International Nuclear Information System (INIS)
2011-01-01
transport in the primary and the secondary circuit (7.2), aerosol behaviour in the containment (7.4) and FP chemistry (7.5). Finally, Chapter 8 presents a review of development and validation efforts for the main severe accident codes: ASTEC, MAAP and MELCOR. In Chapters 3-7, for each of the theme areas, the phenomena involved are reviewed. The major relevant experiments are then briefly described, including recent, ongoing and future projects. The key models and specific codes (except for integral codes) used to simulate the phenomena in question are also discussed. Finally, the state of current knowledge is reviewed and an outlook for the future is presented, especially regarding experimental programmes and the development of modelling tools. (authors)
Accident management insights after the Fukushima Daiichi NPP accident
International Nuclear Information System (INIS)
Degueldre, Didier; Viktorov, Alexandre; Tuomainen, Minna; Ducamp, Francois; Chevalier, Sophie; Guigueno, Yves; Tasset, Daniel; Heinrich, Marcus; Schneider, Matthias; Funahashi, Toshihiro; Hotta, Akitoshi; Kajimoto, Mitsuhiro; Chung, Dae-Wook; Kuriene, Laima; Kozlova, Nadezhda; Zivko, Tomi; Aleza, Santiago; Jones, John; McHale, Jack; Nieh, Ho; Pascal, Ghislain; ); Nakoski, John; Neretin, Victor; Nezuka, Takayoshi; )
2014-01-01
The Fukushima Daiichi nuclear power plant (NPP) accident, that took place on 11 March 2011, initiated a significant number of activities at the national and international levels to reassess the safety of existing NPPs, evaluate the sufficiency of technical means and administrative measures available for emergency response, and develop recommendations for increasing the robustness of NPPs to withstand extreme external events and beyond design basis accidents. The OECD Nuclear Energy Agency (NEA) is working closely with its member and partner countries to examine the causes of the accident and to identify lessons learnt with a view to the appropriate follow-up actions to be taken by the nuclear safety community. Accident management is a priority area of work for the NEA to address lessons being learnt from the accident at the Fukushima Daiichi NPP following the recommendations of Committee on Nuclear Regulatory Activities (CNRA), Committee on the Safety of Nuclear Installations (CSNI), and Committee on Radiation Protection and Public Health (CRPPH). Considering the importance of these issues, the CNRA authorised the formation of a task group on accident management (TGAM) in June 2012 to review the regulatory framework for accident management following the Fukushima Daiichi NPP accident. The task group was requested to assess the NEA member countries needs and challenges in light of the accident from a regulatory point of view. The general objectives of the TGAM review were to consider: - enhancements of on-site accident management procedures and guidelines based on lessons learnt from the Fukushima Daiichi NPP accident; - decision-making and guiding principles in emergency situations; - guidance for instrumentation, equipment and supplies for addressing long-term aspects of accident management; - guidance and implementation when taking extreme measures for accident management. The report is built on the existing bases for capabilities to respond to design basis
Energy Technology Data Exchange (ETDEWEB)
Hwang, Won Tae; Jeong, Hae Sung; Jeong, Hyo Joon; Kil, A Reum; Kim, Eun Han; Han, Moon Hee [Nuclear Environment Safety Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2016-12-15
Methodologies for a series of radiological consequence assessments show a distinctive difference according to the design principles of the original nuclear suppliers and their technical standards to be imposed. This is due to the uncertainties of the accidental source term, radionuclide behavior in the environment, and subsequent radiological dose. Both types of PWR and PHWR are operated in Korea. However, technical standards for evaluating atmospheric dispersion have been enacted based on the U.S. NRC's positions regardless of the reactor types. For this reason, it might cause a controversy between the licensor and licensee of a nuclear power plant. It was modelled under the framework of the NRC Regulatory Guide 1.145 for light-water reactors, reflecting the features of heavy-water reactors as specified in the Canadian National Standard and the modelling features in MACCS2, such as atmospheric diffusion coefficient, ground deposition, surface roughness, radioactive plume depletion, and exposure from ground deposition. An integrated accident consequence assessment code, ACCESS (Accident Consequence Assessment Code for Evaluating Site Suitability), was developed by taking into account the unique regulatory positions for reactor types under the framework of the current Korean technical standards. Field tracer experiments and hand calculations have been carried out for validation and verification of the models. The modelling approaches of ACCESS and its features are introduced, and its applicative results for a hypothetical accidental scenario are comprehensively discussed. In an applicative study, the predicted results by the light-water reactor assessment model were higher than those by other models in terms of total doses.
Grady, Mark F.
2009-01-01
In negligence law, "unavoidable accident" is the risk that remains when an actor has used due care. The counterpart of unavoidable accident is "negligent harm." Negligence law makes parties immune for unavoidable accident even when they have used less than due care. Courts have developed a number of methods by which they "sort" accidents to unavoidable accident or to negligent harm, holding parties liable only for the latter. These sorting techniques are interesting in their own right and als...
Methods and results of a PSA level 2 for a German BWR of the 900 MWe class
International Nuclear Information System (INIS)
Loffler, H.; Sonnenkalb, M.
2006-01-01
On behalf of the federal Ministry for Environment, Nature Conservation and Reactor Safety (BMU) GRS has performed a PSA level 2 for a BWR type 69 NPP of the 900 MWe class, equipped with a N 2 inerted steel containment and a pressure suppression system. Integral deterministic accident analyses have been performed with the computer code MELCOR 1.8.5. Additional analyses have been done for those events and phenomena which are not or not sufficiently covered by MELCOR. The probabilistic event tree analysis begins with the core damage states received from PSA level 1, and it ends with the definition of release categories and the determination of their frequencies. Uncertainties about the frequency of core damage states and about events during the accident progression are taken into account by means of Monte Carlo simulations. If there is a core damage state there is a high probability (>50 %) for a very high and rapid release of radionuclides into the environment. This high conditional probability is due to the very low probability to retain a partly destroyed core inside the reactor pressure vessel (RPV) and because the containment almost certainly fails at the bottom of the control rod drives room after melt release from the failed RPV. (authors)
Directory of Open Access Journals (Sweden)
Audrey Gaudel
2015-12-01
Full Text Available MOZAIC-IAGOS data are used to assess the ability of the MACC reanalysis (REAN to reproduce distributions of ozone (O3 and carbon monoxide (CO, along with vertical and inter-annual variability in the upper troposphere/lower stratosphere region (UTLS over Europe for the period 2003–2010. A control run (CNTRL, without assimilation is compared with the MACC reanalysis (REAN, with assimilation to assess the impact of assimilation. On average over the period, REAN underestimates ozone by 60 ppbv in the lower stratosphere (LS, whilst CO is overestimated by 20 ppbv. In the upper troposphere (UT, ozone is overestimated by 50 ppbv, while CO is partly over or underestimated by up to 20 ppbv. As expected, assimilation generally improves model results but there are some exceptions. Assimilation leads to increased CO mixing ratios in the UT which reduce the biases of the model in this region but the difference in CO mixing ratios between LS and UT has not changed and remains underestimated after assimilation. Therefore, this leads to a significant positive bias of CO in the LS after assimilation. Assimilation improves estimates of the amplitude of the seasonal cycle for both species. Additionally, the observations clearly show a general negative trend of CO in the UT which is rather well reproduced by REAN. However, REAN misses the observed inter-annual variability in summer. The O3–CO correlation in the Ex-UTLS is rather well reproduced by the CNTRL and REAN, although REAN tends to miss the lowest CO mixing ratios for the four seasons and tends to oversample the extra-tropical transition layer (ExTL region in spring. This evaluation stresses the importance of the model gradients for a good description of the mixing in the Ex-UTLS region, which is inherently difficult to observe from satellite instruments.
Domino effect in chemical accidents: main features and accident sequences
Casal Fàbrega, Joaquim; Darbra Roman, Rosa Maria
2010-01-01
The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes a...
Stress in accident and post-accident management at Chernobyl
International Nuclear Information System (INIS)
Girard, P.; Dubreuil, G.H.
1996-01-01
The effects of the Chernobyl nuclear accident on the psychology of the affected population have been much discussed. The psychological dimension has been advanced as a factor explaining the emergence, from 1990 onwards, of a post-accident crisis in the main CIS countries affected. This article presents the conclusions of a series of European studies, which focused on the consequences of the Chernobyl accident. These studies show that the psychological and social effects associated with the post-accident situation arise from the interdependency of a number of complex factors exerting a deleterious effect on the population. We shall first attempt to characterise the stress phenomena observed among the population affected by the accident. Secondly, we will be presenting an anlysis of the various factors that have contributed to the emerging psychological and social features of population reaction to the accident and in post-accident phases, while not neglecting the effects of the pre-accident situation on the target population. Thirdly, we shall devote some initial consideration to the conditions that might be conducive to better management of post-accident stress. In conclusion, we shall emphasise the need to restore confidence among the population generally. (Author)
Energy Technology Data Exchange (ETDEWEB)
Ott, Larry J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Michael [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
2017-08-01
Iron-chromium-aluminum (FeCrAl) alloys are being considered as advanced fuel cladding concepts with enhanced accident tolerance. At high temperatures, FeCrAl alloys have slower oxidation kinetics and higher strength compared with zirconium-based alloys. FeCrAl could be used for fuel cladding and spacer or mixing vane grids in light water reactors and/or as channel box material in boiling water reactors (BWRs). There is a need to assess the potential gains afforded by the FeCrAl accident-tolerant-fuel (ATF) concept over the existing zirconium-based materials employed today. To accurately assess the response of FeCrAl alloys under severe accident conditions, a number of FeCrAl properties and characteristics are required. These include thermophysical properties as well as burst characteristics, oxidation kinetics, possible eutectic interactions, and failure temperatures. These properties can vary among different FeCrAl alloys. Oak Ridge National Laboratory has pursued refined values for the oxidation kinetics of the B136Y FeCrAl alloy (Fe-13Cr-6Al wt %). This investigation included oxidation tests with varying heating rates and end-point temperatures in a steam environment. The rate constant for the low-temperature oxidation kinetics was found to be higher than that for the commercial APMT FeCrAl alloy (Fe-21Cr-5Al-3Mo wt %). Compared with APMT, a 5 times higher rate constant best predicted the entire dataset (root mean square deviation). Based on tests following heating rates comparable with those the cladding would experience during a station blackout, the transition to higher oxidation kinetics occurs at approximately 1,500°C. A parametric study varying the low-temperature FeCrAl oxidation kinetics was conducted for a BWR plant using FeCrAl fuel cladding and channel boxes using the MELCOR code. A range of station blackout severe accident scenarios were simulated for a BWR/4 reactor with Mark I containment. Increasing the FeCrAl low-temperature oxidation rate
Hydrogen-management in beyond design accident conditions in NPP Neckar 2
International Nuclear Information System (INIS)
Zaiss, W.
1999-01-01
Neckar 2 is a 1340 MWE 4-loop pressurized water reactor (PWR) of Siemens KONVOI type, located in the south of Germany. It was first connected to the grid in January 1989. Commercial operation started in April 1989. Task assignment: In Germany it was recommended by the Reactor Safety Commission (RSK) on December 17, 1997, to reequip passive autocatalytic recombiners for the controlling of the hydrogen problem. The removal of the hydrogen is an essential part which guarantees the integrity of the containment. The implementation of the recombiners is a further step for the decrease of the nuclear rest risk. The RSK confirmed, that the implementation of the passive autocatalytic recombiners is a safety measure for the controlled removal of the hydrogen in beyond design accident conditions. Assumption : Failure of the whole residual heat removal system (RHRS) and non sufficient effect of the systems which have been installed for beyond design accident conditions. Effect on the reactor coolant system (RCS): The reactor core will be damaged by non sufficient cooling with the output of hydrogen because all the specified emergency actions have failed. The overheating of the core is responsible for the production of hydrogen by the reaction of zirconium of the fuel-rod cladding with the water vapour. In case of nuclear superheating it would be possible that the reactor vessel would start smelting. The interacting between the core and the concrete, together with the armouring of the biological shield would also produce hydrogen. The hydrogen would escape together with the water vapour out of the leak and would spread out into the whole containment. Results : the number and the position of the different sized recombiners were determined on engineering judgement. the following 4 scenarios are representatively. The 4 scenarios were analyzed for in beyond design accident conditions with the MELCOR-Code: No. 1: Loss of main feedwater supply with primary feed and bleed. No. 2
Analysis of core degradation and relocation phenomena and scenarios in a Nordic-type BWR
Energy Technology Data Exchange (ETDEWEB)
Galushin, Sergey, E-mail: galushin@kth.se; Kudinov, Pavel, E-mail: pkudinov@kth.se
2016-12-15
Highlights: • A data base of the debris properties in lower plenum generated using MELCOR code. • The timing of safety systems has significant effect on the relocated debris properties. • Loose coupling between core relocation and vessel failure analyses was established. - Abstract: Severe Accident Management (SAM) in Nordic Boiling Water Reactors (BWR) employs ex-vessel cooling of core melt debris. The melt is released from the failed vessel and poured into a deep pool of water located under the reactor. The melt is expected to fragment, quench, and form a debris bed, coolable by a natural circulation and evaporation of water. Success of the strategy is contingent upon melt release conditions from the vessel and melt-coolant interaction that determine (i) properties of the debris bed and its coolability (ii) potential for energetic melt-coolant interactions (steam explosions). Risk Oriented Accident Analysis Methodology (ROAAM+) framework is currently under development for quantification of the risks associated with formation of non-coolable debris bed and occurrence of steam explosions, both presenting a credible threats to containment integrity. The ROAAM+ framework consist of loosely coupled models that describe each stage of the accident progression. Core relocation analysis framework provides initial conditions for melt vessel interaction, vessel failure and melt release frameworks. The properties of relocated debris and melt release conditions, including in-vessel and ex-vessel pressure, lower drywell pool depth and temperature, are sensitive to the accident scenarios and timing of safety systems recovery and operator actions. This paper illustrates a methodological approach and relevant data for establishing a connection between core relocation and vessel failure analysis in ROAAM+ approach. MELCOR code is used for analysis of core degradation and relocation phenomena. Properties of relocated debris are obtained as functions of the accident scenario
DEFF Research Database (Denmark)
Møller, Katrine Meltofte; Andersen, Camilla Sloth
2016-01-01
The main idea behind the self-reporting of accidents is to ask people about their traffic accidents and gain knowledge on these accidents without relying on the official records kept by police and/or hospitals.......The main idea behind the self-reporting of accidents is to ask people about their traffic accidents and gain knowledge on these accidents without relying on the official records kept by police and/or hospitals....
Energy Technology Data Exchange (ETDEWEB)
Kim, Tae Woon; Han, Seok Jung; Ahn, Kwang Il; Fynan, Douglas; Jung, Yong Hoon [KAERI, Daejeon (Korea, Republic of)
2016-05-15
Since the Three Mile Island (TMI) (1979), Chernobyl (1986), Fukushima Daiichi (2011) accidents, the assessment of radiological source term effects on the environment has been a key concern of nuclear safety. In the Fukushima Daiichi accident, the long-term SBO (station blackout) accident occurs. Using the worst case assumptions like in Fukushima accident on the accident sequences and on the availability of safety systems, the thermal hydraulic behaviors, core relocation and environmental source terms behaviors are estimated for long-term SBO accident for OPR-1000 reactor. MELCOR code version 1.8.6 is used in this analysis. Source term results estimated in this study is compared with other previous studies and estimated results in Fukushima accidents in UNSCEAR-2013 report. This study estimated that 11 % of iodine can be released to environment and 2% of cesium can be released to environment. UNSCEAR-2013 report estimated that 2 - 8 % of iodine have been released to environment and 1 - 3 % of cesium have been released to the environment. They have similar results in the aspect of release fractions of iodine and cesium to environment.
International Nuclear Information System (INIS)
Liao, Y.; Guentay, S.
2009-01-01
This study develops a methodology to assess the probability for the degraded PWR steam generator to rupture first in the reactor coolant pressure boundary, under severe accident conditions with counter-current natural circulating high temperature gas in the hot leg and SG tubes. The considered SG tube flaws are caused by foreign object wear, which in recent years has emerged as a major inservice degradation mechanism for the new generation tubing materials. The first step develops the statistical distributions for the flaw frequency, size, and the flaw location with respect to the tube length and the tube's tubesheet position, based on data of hundreds of flaws reported in numerous SG inservice inspection reports. The next step performs thermal-hydraulic analysis using the MELCOR code and recent CFD findings to predict the thermal challenge to the degraded tubes and the tube-to-tube difference in thermal response at the SG entrance. The final step applies the creep rupture models in the Monte Carlo random walk to test the potential for the degraded SG to rupture before the surge line. The mean and range of the SG tube rupture probability can be applied to estimate large early release frequency in probabilistic safety assessment.
Energy Technology Data Exchange (ETDEWEB)
Kim, Tae Won; Rhee, Bo Wook; Song, Jin Ho; Kim, Sung Il; Ha, Kwang Soon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2017-06-15
The purpose of this paper is to confirm the event timings and the magnitude of fission product aerosol release from the Fukushima accident. Over a few hundreds of technical papers have been published on the environmental impact of Fukushima Daiichi accident since the accident occurred on March 11, 2011. However, most of the research used reverse or inverse method based on the monitoring of activities in the remote places and only few papers attempted to estimate the release of fission products from individual reactor core or from individual spent fuel pool. Severe accident analysis code can be used to estimate the radioactive release from which reactor core and from which radionuclide the peaks in monitoring points can be generated. The basic material used for this study are the initial core inventory obtained from the report JAEA-Data/Code 2012–018 and the given accident scenarios provided by Japanese Government or Tokyo Electric Power Company (TEPCO) in official reports. In this research a forward method using severe accident progression code is used as it might be useful for justifying the results of reverse or inverse method or vice versa. The release timing and amounts to the environment are estimated for volatile radioactive fission products such as noble gases, cesium, iodine, and tellurium up to 184 hours (about 7.7 days) after earthquake occurs. The in-plant fission product behaviors and release characteristics to environment are estimated using the severe accident progression analysis code, MELCOR, for Fukushima Daiichi accident. These results are compared with other research results which are summarized in UNSCEAR 2013 Report and other technical papers. Also it may provide the physically based arguments for justifying or suspecting the rationale for the scenarios provided in open literature. The estimated results by MELCOR code simulation of this study indicate that the release amount of volatile fission products to environment from Units 1, 2, and 3
Khakzad, Nima; Khan, Faisal; Amyotte, Paul
2015-07-01
Compared to the remarkable progress in risk analysis of normal accidents, the risk analysis of major accidents has not been so well-established, partly due to the complexity of such accidents and partly due to low probabilities involved. The issue of low probabilities normally arises from the scarcity of major accidents' relevant data since such accidents are few and far between. In this work, knowing that major accidents are frequently preceded by accident precursors, a novel precursor-based methodology has been developed for likelihood modeling of major accidents in critical infrastructures based on a unique combination of accident precursor data, information theory, and approximate reasoning. For this purpose, we have introduced an innovative application of information analysis to identify the most informative near accident of a major accident. The observed data of the near accident were then used to establish predictive scenarios to foresee the occurrence of the major accident. We verified the methodology using offshore blowouts in the Gulf of Mexico, and then demonstrated its application to dam breaches in the United Sates. © 2015 Society for Risk Analysis.
Domino effect in chemical accidents: main features and accident sequences.
Darbra, R M; Palacios, Adriana; Casal, Joaquim
2010-11-15
The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes are external events (31%) and mechanical failure (29%). Storage areas (35%) and process plants (28%) are by far the most common settings for domino accidents. Eighty-nine per cent of the accidents involved flammable materials, the most frequent of which was LPG. The domino effect sequences were analyzed using relative probability event trees. The most frequent sequences were explosion→fire (27.6%), fire→explosion (27.5%) and fire→fire (17.8%). Copyright © 2010 Elsevier B.V. All rights reserved.
International Nuclear Information System (INIS)
Hanson, D.J.; Arcieri, W.C.; Ward, L.W.
1992-01-01
A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information
Energy Technology Data Exchange (ETDEWEB)
Hanson, D.J.; Arcieri, W.C.; Ward, L.W.
1992-12-31
A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.
Energy Technology Data Exchange (ETDEWEB)
Hanson, D.J.; Arcieri, W.C.; Ward, L.W.
1992-01-01
A Five-step methodology has been developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and the severe accident conditions to evaluate the availability of the instrumentation to supply needed plant information.
Learning lessons from Natech accidents - the eNATECH accident database
Krausmann, Elisabeth; Girgin, Serkan
2016-04-01
When natural hazards impact industrial facilities that house or process hazardous materials, fires, explosions and toxic releases can occur. This type of accident is commonly referred to as Natech accident. In order to prevent the recurrence of accidents or to better mitigate their consequences, lessons-learned type studies using available accident data are usually carried out. Through post-accident analysis, conclusions can be drawn on the most common damage and failure modes and hazmat release paths, particularly vulnerable storage and process equipment, and the hazardous materials most commonly involved in these types of accidents. These analyses also lend themselves to identifying technical and organisational risk-reduction measures that require improvement or are missing. Industrial accident databases are commonly used for retrieving sets of Natech accident case histories for further analysis. These databases contain accident data from the open literature, government authorities or in-company sources. The quality of reported information is not uniform and exhibits different levels of detail and accuracy. This is due to the difficulty of finding qualified information sources, especially in situations where accident reporting by the industry or by authorities is not compulsory, e.g. when spill quantities are below the reporting threshold. Data collection has then to rely on voluntary record keeping often by non-experts. The level of detail is particularly non-uniform for Natech accident data depending on whether the consequences of the Natech event were major or minor, and whether comprehensive information was available for reporting. In addition to the reporting bias towards high-consequence events, industrial accident databases frequently lack information on the severity of the triggering natural hazard, as well as on failure modes that led to the hazmat release. This makes it difficult to reconstruct the dynamics of the accident and renders the development of
Fukushima Daiichi Unit 1 Ex-Vessel Prediction: Core Concrete Interaction
International Nuclear Information System (INIS)
Robb, Kevin R; Farmer, Mitchell; Francis, Matthew W
2015-01-01
Lower head failure and corium concrete interaction were predicted to occur at Fukushima Daiichi Unit 1 (1F1) by several different system-level code analyses, including MELCOR v2.1 and MAAP5. Although these codes capture a wide range of accident phenomena, they do not contain detailed models for ex-vessel core melt behavior. However, specialized codes exist for analysis of ex-vessel melt spreading (e.g., MELTSPREAD) and long-term debris coolability (e.g., CORQUENCH). On this basis, an analysis was carried out to further evaluate ex-vessel behavior for 1F1 using MELTSPREAD and CORQUENCH. Best-estimate melt pour conditions predicted by MELCOR v2.1 and MAAP5 were used as input. MELTSPREAD was then used to predict the spatially dependent melt conditions and extent of spreading during relocation from the vessel. The results of the MELTSPREAD analysis are reported in a companion paper. This information was used as input for the long-term debris coolability analysis with CORQUENCH.
International Nuclear Information System (INIS)
Krhounkova, J.; Kral, P.; Parduba, Z.
1999-10-01
The conservative assumptions of the analyses were oriented towards a worsening of the process with respect to the pressurized thermal shock (PTS). Four variants were treated, viz. leaks from the cold or hot leg, each at the rated power or zero power. Since the temperature of water supplied to the primary circuit by the emergency core cooling system is an important parameter with respect to a PTS, the calculations were performed by the iterative procedure: the basic thermal hydraulic calculation was performed by the RELAP5/MOD3.2.1 code which calculates the behaviour of the primary and secondary circuits, whereas the MELCOR code was used to calculate the behaviour of the parameters in the hermetic rooms. The calculation by the RELAP code was then repeated using data from the MELCOR calculations. Interventions by the reactor operators were also considered. (P.A.)
Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling
Energy Technology Data Exchange (ETDEWEB)
Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)
2015-05-15
The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined
Severe accidents at nuclear power plants. Their risk assessment and accident management
International Nuclear Information System (INIS)
Abe, Kiyoharu.
1995-05-01
This document is to explain the severe accident issues. Severe Accidents are defined as accidents which are far beyond the design basis and result in severe damage of the core. Accidents at Three Mild Island in USA and at Chernobyl in former Soviet Union are examples of severe accidents. The causes and progressions of the accidents as well as the actions taken are described. Probabilistic Safety Assessment (PSA) is a method to estimate the risk of severe accidents at nuclear reactors. The methodology for PSA is briefly described and current status on its application to safety related issues is introduced. The acceptability of the risks which inherently accompany every technology is then discussed. Finally, provision of accident management in Japan is introduced, including the description of accident management measures proposed for BWRs and PWRs. (author)
International Nuclear Information System (INIS)
Jokiniemi, J.; Kilpi, K.; Lindholm, I.; Maekynen, J.; Pekkarinen, E.; Sairanen, R.; Silde, A.
1995-02-01
Severe accidents are nuclear reactor accidents in which the reactor core is substantially damaged. The report describes severe reactor accident phenomena and their significance for the safety of nuclear power plants. A comprehensive set of phenomena ranging from accident initiation to containment behaviour and containment integrity questions are covered. The report is based on expertise gained in the severe accident assessment projects conducted at the Technical Research Centre of Finland (VTT). (49 refs., 32 figs., 12 tabs.)
Criticality accident of nuclear fuel facility. Think back on JCO criticality accident
International Nuclear Information System (INIS)
Naito, Keiji
2003-09-01
This book is written in order to understand the fundamental knowledge of criticality safety or criticality accident of nuclear fuel facility by the citizens. It consists of four chapters such as critical conditions and criticality accident of nuclear facility, risk of criticality accident, prevention of criticality accident and a measure at an occurrence of criticality accident. A definition of criticality, control of critical conditions, an aspect of accident, a rate of incident, damage, three sufferers, safety control method of criticality, engineering and administrative control, safety design of criticality, investigation of failure of safety control of JCO criticality accident, safety culture are explained. JCO criticality accident was caused with intention of disregarding regulation. It is important that we recognize the correct risk of criticality accident of nuclear fuel facility and prevent disasters. On the basis of them, we should establish safety culture. (S.Y.)
Professional experience and traffic accidents/near-miss accidents among truck drivers.
Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann
2016-10-01
To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Lee, Goany Up; Lee, Hae Cho; Kim, Bong Seok; Kim, Jong Soo; Choi, Pyung Kyu [Dept. of Emergency Preparedness, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2016-12-15
To find out the leak characteristic of research reactor 'HANARO' building in a typhoon condition MELCOR code which normally is used to simulate severe accident behavior in a nuclear power plant was used to simulate the leak rate of air and fission products from reactor hall after the shutdown of the ventilation system of HANARO reactor building. For the simulation, HANARO building was designed by MELCOR code and typhoon condition passed through Daejeon in 2012 was applied. It was found that the leak rate is 0.1%·day{sup -1} of air, 0.004%·day{sup -1} of noble gas and 3.7×10{sup -5}%·day{sup -1} of aerosol during typhoon passing. The air leak rate of 0.1%·day can be converted into 1.36 m{sup 3}·hr{sup -1} , but the design leak rate in HANARO safety analysis report was considered as 600 m3·hr{sup -1} under the condition of 20 m·sec{sup -1} wind speed outside of the building by typhoon. Most of fission products during the maximum hypothesis accident at HANARO reactor will be contained in the reactor hall, so the direct radiation by remained fission products in the reactor hall will be the most important factor in designing emergency preparedness for HANARO reactor.
International Nuclear Information System (INIS)
Lee, Goany Up; Lee, Hae Cho; Kim, Bong Seok; Kim, Jong Soo; Choi, Pyung Kyu
2016-01-01
To find out the leak characteristic of research reactor 'HANARO' building in a typhoon condition MELCOR code which normally is used to simulate severe accident behavior in a nuclear power plant was used to simulate the leak rate of air and fission products from reactor hall after the shutdown of the ventilation system of HANARO reactor building. For the simulation, HANARO building was designed by MELCOR code and typhoon condition passed through Daejeon in 2012 was applied. It was found that the leak rate is 0.1%·day -1 of air, 0.004%·day -1 of noble gas and 3.7×10 -5 %·day -1 of aerosol during typhoon passing. The air leak rate of 0.1%·day can be converted into 1.36 m 3 ·hr -1 , but the design leak rate in HANARO safety analysis report was considered as 600 m3·hr -1 under the condition of 20 m·sec -1 wind speed outside of the building by typhoon. Most of fission products during the maximum hypothesis accident at HANARO reactor will be contained in the reactor hall, so the direct radiation by remained fission products in the reactor hall will be the most important factor in designing emergency preparedness for HANARO reactor
Prevention of pedestrian accidents.
Kendrick, D
1993-01-01
Child pedestrian accidents are the most common road traffic accident resulting in injury. Much of the existing work on road traffic accidents is based on analysing clusters of accidents despite evidence that child pedestrian accidents tend to be more dispersed than this. This paper analyses pedestrian accidents in 573 children aged 0-11 years by a locally derived deprivation score for the years 1988-90. The analysis shows a significantly higher accident rate in deprived areas and a dose respo...
NSGIC State | GIS Inventory — Accident Locations dataset current as of 2011. MDTA Accidents, Accidents on MDTA locations, Accidents on I 95, US 50, I 695, Accident on John F Kennedy Highway, Nice...
Energy Technology Data Exchange (ETDEWEB)
Silde, A.; Lindholm, I. [VTT Energy, Espoo (Finland)
1997-12-01
The containment thermal hydraulic loads during high pressure melt ejection in a Nordic BWR are studied parametrically with the CONTAIN and the MELCOR codes. The work is part of the Nordic RAK-2 project. The containment analyses were divided into two categories according to composition of the discharged debris: metallic and oxidic debris cases. In the base case with highly metallic debris, all sources from the reactor coolant system to the containment were based on the MELCOR/BH calculation. In the base case with the oxidic debris, the source data was specified assuming that {approx} 15% of the whole core material inventory and 34,000 kg of saturated water was discharged from the reactor pressure vessel (RPV) during 30 seconds. In this case, the debris consisted mostly of oxides. The highest predicted containment pressure peaks were about 8.5 bar. In the scenarios with highly metallic debris source, very high gas temperature of about 1900 K was predicted in the pedestal, and about 1400 K in the upper drywell. The calculations with metallic debris were sensititive to model parameters, like the particle size and the parameters, which control the chemical reaction kinetics. In the scenarios with oxidic debris source, the predicted pressure peaks were comparable to the cases with the metallic debris source. The maximum gas temperatures (about 450-500 K) in the containment were, however, significantly lower than in the respective metallic debris case. The temperatures were also insensitive to parametric variations. In addition, one analysis was performed with the MELCOR code for benchmarking of the MELCOR capabilities against the more detailed CONTAIN code. The calculations showed that leak tightness of the containment penetrations could be jeopardized due to high temperature loads, if a high pressure melt ejection occurred during a severe accident. Another consequence would be an early containment venting. (au). 28 refs.
Use of PSA and severe accident assessment results for the accident management
International Nuclear Information System (INIS)
Jang, S. H.; Kim, H. G.; Jang, H. S.; Moon, S. K.; Park, J. U.
1993-12-01
The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management
Use of PSA and severe accident assessment results for the accident management
Energy Technology Data Exchange (ETDEWEB)
Jang, S H; Kim, H G; Jang, H S; Moon, S K; Park, J U [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)
1993-12-15
The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management.
[Accidents and injuries at work].
Standke, W
2014-06-01
In the case of an accident at work, the person concerned is insured by law according to the guidelines of the Sozialgesetzbuch VII as far as the injuries have been caused by this accident. The most important source of information on the incident in question is the accident report that has to be sent to the responsible institution for statutory accident insurance and prevention by the employer, if the accident of the injured person is fatal or leads to an incapacity to work for more than 3 days (= reportable accident). Data concerning accidents like these are sent to the Deutsche Gesetzliche Unfallversicherung (DGUV) as part of a random sample survey by the institutions for statutory accident insurance and prevention and are analyzed statistically. Thus the key issues of accidents can be established and used for effective prevention. Although the success of effective accident prevention is undisputed, there were still 919,025 occupational accidents in 2011, with clear gender-related differences. Most occupational accidents involve the upper and lower extremities. Accidents are analyzed comprehensively and the results are published and made available to all interested parties in an effort to improve public awareness of possible accidents. Apart from reportable accidents, data on the new occupational accident pensions are also gathered and analyzed statistically. Thus, additional information is gained on accidents with extremely serious consequences and partly permanent injuries for the accident victims.
Severe accident analysis methodology in support of accident management
International Nuclear Information System (INIS)
Boesmans, B.; Auglaire, M.; Snoeck, J.
1997-01-01
The author addresses the implementation at BELGATOM of a generic severe accident analysis methodology, which is intended to support strategic decisions and to provide quantitative information in support of severe accident management. The analysis methodology is based on a combination of severe accident code calculations, generic phenomenological information (experimental evidence from various test facilities regarding issues beyond present code capabilities) and detailed plant-specific technical information
Biomass accident investigations – missed opportunities for learning and accident prevention
DEFF Research Database (Denmark)
Hedlund, Frank Huess
2017-01-01
The past decade has seen a major increase in the production of energy from biomass. The growth has been mirrored in an increase of serious biomass related accidents involving fires, gas explosions, combustible dust explosions and the release of toxic gasses. There are indications that the number...... of bioenergy related accidents is growing faster than the energy production. This paper argues that biomass accidents, if properly investigated and lessons shared widely, provide ample opportunities for improving general hazard awareness and safety performance of the biomass industry. The paper examines...... selected serious accidents involving biogas and wood pellets in Denmark and argues that such opportunities for learning were missed because accident investigations were superficial, follow-up incomplete and information sharing absent. In one particularly distressing case, a facility saw a repeat accident...
International Nuclear Information System (INIS)
Zhao Yuan; Dong Binjiang
2003-01-01
The method of radiological consequence assessment as Dayabay nuclear power station being attacked in war is studied in this paper. The Models and software of calculation and the parameters which have been chosen are also studied in this paper. This study estimates the off-site consequences of two different types of being attack accidents spectrum and the spent fuel pool being attacked accidents spectrum. This study calculated the distributing of radiological consequence in different weather. According to the analyse of the consequence, we get such result that the radiate consequence of nuclear reactor of Daya Bay nuclear power plant being attack in war is the same as the consequence of nuclear accident, but the consequence of spent fuel pool being attacked is very serious. If the spent fuel pool was attacked by the enemy, the contaminated area is very large. The effective dose within 30 km under the wind will exceed 1 Sv. Based in part upon the above information the recommendation is made that the Daya Bay nuclear power plant should be closed or run in low power. and the nuclear island should be protected in war. (authors)
Development and assessment of ASTEC code for severe accident simulation
International Nuclear Information System (INIS)
Van Dorsselaere, J.P.; Pignet, S.; Seropian, C.; Montanelli, T.; Giordano, P.; Jacq, F.; Schwinges, B.
2005-01-01
Full text of publication follows: The ASTEC integral code, jointly developed by IRSN and GRS since several years for evaluation of source term during a severe accident (SA) in a Light Water Reactor, will play a central role in the SARNET network of excellence of the 6. Framework Programme (FwP) of the European Commission which started in spring 2004. It should become the reference European SA integral code in the next years. The version V1.1, released in June 2004, allows to model most of the main physical phenomena (except steam explosion) near or at the state of the art. In order to allow to study a great number of scenarios, a compromise must be found between precision of results and calculation time: one day of accident time usually takes less than one day of real time to be simulated on a PC computer. Important efforts are being made on validation by covering more than 30 reference experiments, often International Standard Problems from OECD (CORA, LOFT, PACTEL, BETA, VANAM, ACE-RTF, Phebus.FPT1...). The code is also used for the detailed interpretation of all the integral Phebus.FP experiments. Eighteen European partners performed a first independent evaluation of the code capabilities in 2000-03 within the frame of the EVITA 5. FwP project on one hand by comparison to experiments and on another hand by benchmarking with MAAP4 and MELCOR integral codes on plant applications on PWR and VVER. Their main conclusions were the needs of improvement of code robustness (especially the 2 new modules CESAR and DIVA simulating respectively circuit thermal hydraulics and core degradation) and of post-processing tools. Some improvements have already been achieved in the latest version V 1.1 on these two aspects. A new module MEDICIS devoted to Molten Core Concrete Interaction (MCCI) is implemented in this version, with a tight coupling to the containment thermal hydraulics module CPA. The paper presents a detailed analysis of a TMLB sequence on a French 900 MWe PWR, from
Detection and analysis of accident black spots with even small accident figures.
Oppe, S.
1982-01-01
Accident black spots are usually defined as road locations with high accident potentials. In order to detect such hazardous locations we have to know the probability of an accident for a traffic situation of some kind, or the mean number of accidents for some unit of time. In almost all procedures
Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT
International Nuclear Information System (INIS)
Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee
2016-01-01
Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment
Underreporting of maritime accidents to vessel accident databases.
Hassel, Martin; Asbjørnslett, Bjørn Egil; Hole, Lars Petter
2011-11-01
Underreporting of maritime accidents is a problem not only for authorities trying to improve maritime safety through legislation, but also to risk management companies and other entities using maritime casualty statistics in risk and accident analysis. This study collected and compared casualty data from 01.01.2005 to 31.12.2009, from IHS Fairplay and the maritime authorities from a set of nations. The data was compared to find common records, and estimation of the true number of occurred accidents was performed using conditional probability given positive dependency between data sources, several variations of the capture-recapture method, calculation of best case scenario assuming perfect reporting, and scaling up a subset of casualty information from a marine insurance statistics database. The estimated upper limit reporting performance for the selected flag states ranged from 14% to 74%, while the corresponding estimated coverage of IHS Fairplay ranges from 4% to 62%. On average the study results document that the number of unreported accidents makes up roughly 50% of all occurred accidents. Even in a best case scenario, only a few flag states come close to perfect reporting (94%). The considerable scope of underreporting uncovered in the study, indicates that users of statistical vessel accident data should assume a certain degree of underreporting, and adjust their analyses accordingly. Whether to use correction factors, a safety margin, or rely on expert judgment, should be decided on a case by case basis. Copyright © 2011 Elsevier Ltd. All rights reserved.
Kim, Jin-Ho; Kim, Byeong-Keuk; Kim, Seunghwan; Ahn, Chul-Min; Kim, Jung-Sun; Ko, Young-Guk; Choi, Donghoon; Hong, Myeong-Ki; Jang, Yangsoo
2017-12-20
This study aimed to examine predictors and clinical outcomes of periprocedural myocardial infarction (PMI) after chronic total occlusion (CTO) intervention. There are limited data on the clinical implications of PMI after CTO intervention in the new-generation drug-eluting stent (DES) era. We enrolled 337 patients who underwent CTO intervention and met the study criteria. We evaluated the incidence and predictors of PMI, defined as an increase in creatine kinase-MB ≥3× the upper limit of normal (ULN) after intervention and compared the occurrence rates of major adverse cardiac and cerebrovascular events (MACCE, defined as the composite of cardiac death, myocardial infarction, stent thrombosis, target-vessel revascularization, or cerebrovascular accidents) between the PMI and non-PMI groups. PMI occurred in 23 (6.8%) patients after CTO intervention. Significant independent predictors were previous bypass surgery [odds ratio (OR) = 5.52, 95% confidence interval (CI) = 1.17-25.92; P = 0.03], Japan-CTO score ≥3 (OR = 7.06, 95%CI = 2.57-19.39; P PMI group had a significantly higher MACCE rate than the non-PMI group (23.7 vs. 5.6%, P = 0.008 by log-rank test). PMI was an independent predictor of MACCE (HR = 4.26, 95%CI = 1.35-13.43; P = 0.01). The MACCE rate gradually increased in a CK-MB-dependent fashion and was highest in patients with ≥10× ULN (P = 0.005). Previous bypass surgery, high Japan-CTO score, side branch occlusion, and longer procedure time were strongly related to PMI occurrence after CTO intervention. PMI was significantly associated with worse clinical outcomes in the new-generation DES era. © 2017 Wiley Periodicals, Inc.
Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT
Energy Technology Data Exchange (ETDEWEB)
Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee [KINS, Daejeon (Korea, Republic of)
2016-05-15
Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment.
Specific features of RBMK severe accidents progression and approach to the accident management
International Nuclear Information System (INIS)
Vasilevskij, V.P.; Nikitin, Yu.M.; Petrov, A.A.; Potapov, A.A.; Cherkashov, Yu.M.
2001-01-01
Fundamental construction features of the LWGR facilities (absence of common external containment shell, disintegrated circulation circuit and multichannel reactor core, positive vapor reactivity coefficient, high mass of thermally capacious graphite moderator) predetermining development of assumed heavy non-projected accidents and handling them are treated. Rating the categories of the reactor core damages for non-projected accidents and accident types producing specific grope of damages is given. Passing standard non-projected accidents, possible methods of attack accident consequences, as well as methods of calculated analysis of non-projected accidents are demonstrated [ru
Large Break LOCA Accident Management Strategies for Accidents With Large Containment Leaks
International Nuclear Information System (INIS)
Sdouz, Gert
2006-01-01
The goal of this work is the investigation of the influence of different accident management strategies on the thermal-hydraulics in the containment during a Large Break Loss of Coolant Accident with a large containment leak from the beginning of the accident. The increasing relevance of terrorism suggests a closer look at this kind of severe accidents. Normally the course of severe accidents and their associated phenomena are investigated with the assumption of an intact containment from the beginning of the accident. This intact containment has the ability to retain a large part of the radioactive inventory. In these cases there is only a release via a very small leakage due to the un-tightness of the containment up to cavity bottom melt through. This paper represents the last part of a comprehensive study on the influence of accident management strategies on the source term of VVER-1000 reactors. Basically two different accident sequences were investigated: the 'Station Blackout'- sequence and the 'Large Break LOCA'. In a first step the source term calculations were performed assuming an intact containment from the beginning of the accident and no accident management action. In a further step the influence of different accident management strategies was studied. The last part of the project was a repetition of the calculations with the assumption of a damaged containment from the beginning of the accident. This paper concentrates on the last step in the case of a Large Break LOCA. To be able to compare the results with calculations performed years ago the calculations were performed using the Source Term Code Package (STCP), hydrogen explosions are not considered. In this study four different scenarios have been investigated. The main parameter was the switch on time of the spray systems. One of the results is the influence of different accident management strategies on the source term. In the comparison with the sequence with intact containment it was
SEVERE ACCIDENT ISSUES RAISED BY THE FUKUSHIMA ACCIDENT AND IMPROVEMENTS SUGGESTED
SONG, JIN HO; KIM, TAE WOON
2014-01-01
This paper revisits the Fukushima accident to draw lessons in the aspect of nuclear safety considering the fact that the Fukushima accident resulted in core damage for three nuclear power plants simultaneously and that there is a high possibility of a failure of the integrity of reactor vessel and primary containment vessel. A brief review on the accident progression at Fukushima nuclear power plants is discussed to highlight the nature and characteristic of the event. As the severe accide...
International Nuclear Information System (INIS)
1987-01-01
On 27 May 1986 the Norwegian government appointed an inter-ministerial committee of senior officials to prepare a report on experiences in connection with the Chernobyl accident. The present second part of the committee's report describes proposals for measures to prevent and deal with similar accidents in the future. The committee's evaluations and proposals are grouped into four main sections: Safety and risk at nuclear power plants; the Norwegian contingency organization for dealing with nuclear accidents; compensation issues; and international cooperation
A restructuring of CF package for MIDAS computer code
International Nuclear Information System (INIS)
Park, S. H.; Kim, K. R.; Kim, D. H.; Cho, S. W.
2004-01-01
CF package, which evaluates user-specified 'control functions' and applies them to define or control various aspects of computation, has been restructured for the MIDAS computer code. MIDAS is being developed as an integrated severe accident analysis code with a user-friendly graphical user interface and modernized data structure. To do this, data transferring methods of current MELCOR code are modified and adopted into the CF package. The data structure of the current MELCOR code using FORTRAN77 causes a difficult grasping of meaning of the variables as well as waste of memory, difficulty is more over because its data is location information of other package's data due to characteristics of CF package. New features of FORTRAN90 make it possible to allocate the storage dynamically and to use the user-defined data type, which lead to an efficient memory treatment and an easy understanding of the code. Restructuring of the CF package addressed in this paper includes module development, subroutine modification, and treats MELGEN, which generates data file, as well as MELCOR, which is processing a calculation. The verification has been done by comparing the results of the modified code with those from the existing code. As the trends are similar to each other, it hints that the same approach could be extended to the entire code package. It is expected that code restructuring will accelerate the code domestication thanks to direct understanding of each variable and easy implementation of modified or newly developed models
International Nuclear Information System (INIS)
1982-01-01
The film presents statistical data on criticality accidents. It outlines past IAEA activities on criticality accident dosimetry and the technical documents that resulted from this work. The film furthermore illustrates an international comparison study on nuclear accident dosimetry conducted at the Atomic Energy Research Establishment, Harwell, United Kingdom
Energy Technology Data Exchange (ETDEWEB)
NONE
1983-12-31
The film presents statistical data on criticality accidents. It outlines past IAEA activities on criticality accident dosimetry and the technical documents that resulted from this work. The film furthermore illustrates an international comparison study on nuclear accident dosimetry conducted at the Atomic Energy Research Establishment, Harwell, United Kingdom
Planning for large-scale accidents: learning from the Three Mile Island accident
International Nuclear Information System (INIS)
Fischer, D.W.
1981-01-01
Decision-making issues raised at the Three Mile Island nuclear accident in Pennsylvania are explored. The organizations involved, their interconnections, and decisions are described. The underlying issues bearing on allocation of effort to pre-accident planning and actual accident responses are also noted. Finally, a framework from this effort is used for guiding the planning of operations for future accidents. (author)
International Nuclear Information System (INIS)
Nenot, J.C.
1996-01-01
Analysis of radiation accidents over a 50 year period shows that simple cases, where the initiating events were immediately recognised, the source identified and under control, the medical input confined to current handling, were exceptional. In many cases, the accidents were only diagnosed when some injuries presented by the victims suggested the radiological nature of the cause. After large-scale accidents, the situation becomes more complicated, either because of management or medical problems, or both. The review of selected accidents which resulted in severe consequences shows that most of them could have been avoided; lack of regulations, contempt for rules, human failure and insufficient training have been identified as frequent initiating parameters. In addition, the situation was worsened because of unpreparedness, insufficient planning, unadapted resources, and underestimation of psychosociological aspects. (author)
International Nuclear Information System (INIS)
Gustavsson, Veine
2002-11-01
The report gives a review of the results from the last years research on severe reactor accidents, and an opinion on the possibilities to refine the present strategies for accident management in Swedish and Finnish BWRs. The following aspect of reactor accidents are the major themes of the study: 1. Early pressure relief from hydrogen production; 2. Recriticality in re-flooded, degraded core; 3. Melt-through; 4. Steam explosion after melt-through; 5. Coolability of the melt after after melt-through; 6. Hydrogen fire in the reactor containment; 7. Leaking containment; 8. Hydrogen fire in the reactor building; 9. Long-time developments after a severe accident; 10. Accidents during shutdown for overhaul; 11. Information need for remedial actions. Possibilities for improving the strategies in each of these areas are discussed. The review shows that our knowledge is sufficient in the areas 1, 2, 4, 6, 8. For the other areas, more research is needed
Database on aircraft accidents
International Nuclear Information System (INIS)
Nishio, Masahide; Koriyama, Tamio
2012-09-01
The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to the report, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. This year, the database was revised by adding aircraft accidents in 2010 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2011 database for latest 20 years from 1991 to 2010. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for latest 20 years from 1991 to 2010 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2011 revised database for latest 20 years from 1991 to 2010 shows the followings. The trend of the 2011 database changes little as compared to the last year's one. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. 4 large fixed-wing aircraft accidents, 58 small fixed-wing aircraft accidents, 5 large bladed aircraft accidents and 114 small bladed aircraft accidents occurred. The relevant accidents for evaluating
2005-08-01
As the most effective strategy for improving safety is to prevent accidents from occurring at all, the Volpe Center applies a broad range of research techniques and capabilities to determine causes and consequences of accidents and to identify, asses...
Final Report on ITER Task Agreement 81-08
Energy Technology Data Exchange (ETDEWEB)
Richard L. Moore
2008-03-01
As part of an ITER Implementing Task Agreement (ITA) between the ITER US Participant Team (PT) and the ITER International Team (IT), the INL Fusion Safety Program was tasked to provide the ITER IT with upgrades to the fusion version of the MELCOR 1.8.5 code including a beryllium dust oxidation model. The purpose of this model is to allow the ITER IT to investigate hydrogen production from beryllium dust layers on hot surfaces inside the ITER vacuum vessel (VV) during in-vessel loss-of-cooling accidents (LOCAs). Also included in the ITER ITA was a task to construct a RELAP5/ATHENA model of the ITER divertor cooling loop to model the draining of the loop during a large ex-vessel pipe break followed by an in-vessel divertor break and compare the results to a simular MELCOR model developed by the ITER IT. This report, which is the final report for this agreement, documents the completion of the work scope under this ITER TA, designated as TA 81-08.
Visualization of Traffic Accidents
Wang, Jie; Shen, Yuzhong; Khattak, Asad
2010-01-01
Traffic accidents have tremendous impact on society. Annually approximately 6.4 million vehicle accidents are reported by police in the US and nearly half of them result in catastrophic injuries. Visualizations of traffic accidents using geographic information systems (GIS) greatly facilitate handling and analysis of traffic accidents in many aspects. Environmental Systems Research Institute (ESRI), Inc. is the world leader in GIS research and development. ArcGIS, a software package developed by ESRI, has the capabilities to display events associated with a road network, such as accident locations, and pavement quality. But when event locations related to a road network are processed, the existing algorithm used by ArcGIS does not utilize all the information related to the routes of the road network and produces erroneous visualization results of event locations. This software bug causes serious problems for applications in which accurate location information is critical for emergency responses, such as traffic accidents. This paper aims to address this problem and proposes an improved method that utilizes all relevant information of traffic accidents, namely, route number, direction, and mile post, and extracts correct event locations for accurate traffic accident visualization and analysis. The proposed method generates a new shape file for traffic accidents and displays them on top of the existing road network in ArcGIS. Visualization of traffic accidents along Hampton Roads Bridge Tunnel is included to demonstrate the effectiveness of the proposed method.
Supervisor's accident investigation handbook
International Nuclear Information System (INIS)
1980-02-01
This pamphlet was prepared by the Environmental Health and Safety Department (EH and S) of Lawrence Berkeley Laboratory (LBL) to provide LBL supervisors with a handy reference to LBL's accident investigation program. The publication supplements the Accident and Emergencies section of LBL's Regulations and Procedures Manual, Pub. 201. The present guide discusses only accidents that are to be investigated by the supervisor. These accidents are classified as Type C by the Department of Energy (DOE) and include most occupational injuries and illnesses, government motor-vehicle accidents, and property damages of less than $50,000
Cost per severe accident as an index for severe accident consequence assessment and its applications
International Nuclear Information System (INIS)
Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo
2014-01-01
The Fukushima Accident emphasizes the need to integrate the assessments of health effects, economic impacts, social impacts and environmental impacts, in order to perform a comprehensive consequence assessment of severe accidents in nuclear power plants. “Cost per severe accident” is introduced as an index for that purpose. The calculation methodology, including the consequence analysis using level 3 probabilistic risk assessment code OSCAAR and the calculation method of the cost per severe accident, is proposed. This methodology was applied to a virtual 1,100 MWe boiling water reactor. The breakdown of the cost per severe accident was provided. The radiation effect cost, the relocation cost and the decontamination cost were the three largest components. Sensitivity analyses were carried out, and parameters sensitive to cost per severe accident were specified. The cost per severe accident was compared with the amount of source terms, to demonstrate the performance of the cost per severe accident as an index to evaluate severe accident consequences. The ways to use the cost per severe accident for optimization of radiation protection countermeasures and for estimation of the effects of accident management strategies are discussed as its applications. - Highlights: • Cost per severe accident is used for severe accident consequence assessment. • Assessments of health, economic, social and environmental impacts are included. • Radiation effect, relocation and decontamination costs are important cost components. • Cost per severe accident can be used to optimize radiation protection measures. • Effects of accident management can be estimated using the cost per severe accident
Application of the accident management information needs methodology to a severe accident sequence
International Nuclear Information System (INIS)
Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.
1989-01-01
The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel
Application of the accident management information needs methodology to a severe accident sequence
Energy Technology Data Exchange (ETDEWEB)
Ward, L.W.; Hanson, D.J.; Nelson, W.R. (Idaho National Engineering Laboratory, Idaho Falls (USA)); Solberg, D.E. (Nuclear Regulatory Commission, Washington, DC (USA))
1989-11-01
The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel.
International Nuclear Information System (INIS)
Perrow, C.
1989-01-01
The author has chosen numerous concrete examples to illustrate the hazardousness inherent in high-risk technologies. Starting with the TMI reactor accident in 1979, he shows that it is not only the nuclear energy sector that bears the risk of 'normal accidents', but also quite a number of other technologies and industrial sectors, or research fields. The author refers to the petrochemical industry, shipping, air traffic, large dams, mining activities, and genetic engineering, showing that due to the complexity of the systems and their manifold, rapidly interacting processes, accidents happen that cannot be thoroughly calculated, and hence are unavoidable. (orig./HP) [de
Accident analysis. A review of the various accidents classifications
International Nuclear Information System (INIS)
Martin Martin, L.; Figueras, J.M.
1982-01-01
The objective of the accident analysis, in relation with the safety evaluation, environmental impact and emergency planning, should be to identify the total risk to the population and workers from potential accidents in the facility, analizing it over full spectrum of severity. (auth.)
French policy for managing the post-accident phase of a nuclear accident.
Gallay, F; Godet, J L; Niel, J C
2015-06-01
In 2005, at the request of the French Government, the Nuclear Safety Authority (ASN) established a Steering Committee for the Management of the Post-Accident Phase of a Nuclear Accident or a Radiological Emergency, with the objective of establishing a policy framework. Under the supervision of ASN, this Committee, involving several tens of experts from different backgrounds (e.g. relevant ministerial offices, expert agencies, local information commissions around nuclear installations, non-governmental organisations, elected officials, licensees, and international experts), developed a number of recommendations over a 7-year period. First published in November 2012, these recommendations cover the immediate post-emergency situation, and the transition and longer-term periods of the post-accident phase in the case of medium-scale nuclear accidents causing short-term radioactive release (less than 24 h) that might occur at French nuclear facilities. They also apply to actions to be undertaken in the event of accidents during the transportation of radioactive materials. These recommendations are an important first step in preparation for the management of a post-accident situation in France in the case of a nuclear accident. © The Chartered Institution of Building Services Engineers 2014.
Accident progression event tree analysis for postulated severe accidents at N Reactor
International Nuclear Information System (INIS)
Wyss, G.D.; Camp, A.L.; Miller, L.A.; Dingman, S.E.; Kunsman, D.M.; Medford, G.T.
1990-06-01
A Level II/III probabilistic risk assessment (PRA) has been performed for N Reactor, a Department of Energy (DOE) production reactor located on the Hanford reservation in Washington. The accident progression analysis documented in this report determines how core damage accidents identified in the Level I PRA progress from fuel damage to confinement response and potential releases the environment. The objectives of the study are to generate accident progression data for the Level II/III PRA source term model and to identify changes that could improve plant response under accident conditions. The scope of the analysis is comprehensive, excluding only sabotage and operator errors of commission. State-of-the-art methodology is employed based largely on the methods developed by Sandia for the US Nuclear Regulatory Commission in support of the NUREG-1150 study. The accident progression model allows complex interactions and dependencies between systems to be explicitly considered. Latin Hypecube sampling was used to assess the phenomenological and systemic uncertainties associated with the primary and confinement system responses to the core damage accident. The results of the analysis show that the N Reactor confinement concept provides significant radiological protection for most of the accident progression pathways studied
Probability of spent fuel transportation accidents
International Nuclear Information System (INIS)
McClure, J.D.
1981-07-01
The transported volume of spent fuel, incident/accident experience and accident environment probabilities were reviewed in order to provide an estimate of spent fuel accident probabilities. In particular, the accident review assessed the accident experience for large casks of the type that could transport spent (irradiated) nuclear fuel. This review determined that since 1971, the beginning of official US Department of Transportation record keeping for accidents/incidents, there has been one spent fuel transportation accident. This information, coupled with estimated annual shipping volumes for spent fuel, indicated an estimated annual probability of a spent fuel transport accident of 5 x 10 -7 spent fuel accidents per mile. This is consistent with ordinary truck accident rates. A comparison of accident environments and regulatory test environments suggests that the probability of truck accidents exceeding regulatory test for impact is approximately 10 -9 /mile
Application of the accident management information needs methodology to a severe accident sequence
International Nuclear Information System (INIS)
Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.
1989-01-01
The U.S. Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe accident research results to enhance the capability of plant operating personnel to effectively manage severe accidents. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed as part of the research program designed to resolve this issue. The methodology identifies the information needs of the plant personnel during a wide range of accident conditions, the existing plant measurements capable of supplying these information needs and what, if any minor additions to instrument and display systems would enhance the capability to manage accidents, known limitations on the capability of these measurements to function properly under the conditions that will be present during a wide range of severe accidents, and areas in which the information systems could mislead plant personnel. This paper presents an application of this methodology to a severe accident sequence to demonstrate its use in identifying the information which is available for management of the event. The methodology has been applied to a severe accident sequence in a Pressurized Water Reactor with a large dry containment. An examination of the capability of the existing measurements was then performed to determine whether the information needs can be supplied
Molten material relocation into the lower plenum: a status report
International Nuclear Information System (INIS)
1998-09-01
This report, prepared by the task group 'Degraded Core Cooling' (DCC) for the CSNI, summarizes the experimental and theoretical knowledge of molten material relocation from a degraded core to the lower plenum of the reactor vessel under the main severe accident scenarios envisaged for both PWRs and BWRs, and boundary conditions. Consequences of movement of material to the lower head are considered with respect to the potential for reactor pressure vessel failure. The following models are reviewed: SCDAP/RELAP5, ICARE/CATHARE, ATHLET-CD/KESS, MELCOR, MAAP4, ESCADRE, etc.
Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis
International Nuclear Information System (INIS)
Farmer, Mitchell T.; Bunt, R.; Corradini, M.; Ellison, Paul B.; Francis, M.; Gabor, John D.; Gauntt, R.; Henry, C.; Linthicum, R.; Luangdilok, W.; Lutz, R.; Paik, C.; Plys, M.; Rabiti, Cristian; Rempe, J.; Robb, K.; Wachowiak, R.
2015-01-01
The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy's (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).
Reactor Safety Gap Evaluation of Accident Tolerant Components and Severe Accident Analysis
Energy Technology Data Exchange (ETDEWEB)
Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Bunt, R. [Southern Nuclear, Atlanta, GA (United States); Corradini, M. [Univ. of Wisconsin, Madison, WI (United States); Ellison, Paul B. [GE Power and Water, Duluth, GA (United States); Francis, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Gabor, John D. [Erin Engineering, Walnut Creek, CA (United States); Gauntt, R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Henry, C. [Fauske and Associates, Burr Ridge, IL (United States); Linthicum, R. [Exelon Corp., Chicago, IL (United States); Luangdilok, W. [Fauske and Associates, Burr Ridge, IL (United States); Lutz, R. [PWR Owners Group (PWROG); Paik, C. [Fauske and Associates, Burr Ridge, IL (United States); Plys, M. [Fauske and Associates, Burr Ridge, IL (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rempe, J. [Rempe and Associates LLC, Idaho Falls, ID (United States); Robb, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Wachowiak, R. [Electric Power Research Inst. (EPRI), Knovville, TN (United States)
2015-01-31
The overall objective of this study was to conduct a technology gap evaluation on accident tolerant components and severe accident analysis methodologies with the goal of identifying any data and/or knowledge gaps that may exist, given the current state of light water reactor (LWR) severe accident research, and additionally augmented by insights obtained from the Fukushima accident. The ultimate benefit of this activity is that the results can be used to refine the Department of Energy’s (DOE) Reactor Safety Technology (RST) research and development (R&D) program plan to address key knowledge gaps in severe accident phenomena and analyses that affect reactor safety and that are not currently being addressed by the industry or the Nuclear Regulatory Commission (NRC).
Persistence of airline accidents.
Barros, Carlos Pestana; Faria, Joao Ricardo; Gil-Alana, Luis Alberiko
2010-10-01
This paper expands on air travel accident research by examining the relationship between air travel accidents and airline traffic or volume in the period from 1927-2006. The theoretical model is based on a representative airline company that aims to maximise its profits, and it utilises a fractional integration approach in order to determine whether there is a persistent pattern over time with respect to air accidents and air traffic. Furthermore, the paper analyses how airline accidents are related to traffic using a fractional cointegration approach. It finds that airline accidents are persistent and that a (non-stationary) fractional cointegration relationship exists between total airline accidents and airline passengers, airline miles and airline revenues, with shocks that affect the long-run equilibrium disappearing in the very long term. Moreover, this relation is negative, which might be due to the fact that air travel is becoming safer and there is greater competition in the airline industry. Policy implications are derived for countering accident events, based on competition and regulation. © 2010 The Author(s). Journal compilation © Overseas Development Institute, 2010.
International Nuclear Information System (INIS)
Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung
2003-01-01
This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages
Review of nuclear reactor accidents
International Nuclear Information System (INIS)
Connelly, J.W.; Storr, G.J.
1989-01-01
Two types of severe reactor accidents - loss of coolant or coolant flow and transient overpower (TOP) accidents - are described and compared. Accidents in research reactors are discussed. The 1961 SL1 accident in the US is used as an illustration as it incorporates the three features usually combined in a severe accident - a design flaw or flaws in the system, a circumvention of safety circuits or procedures, and gross operator error. The SL1 reactor, the reactivity accident and the following fuel-coolant interaction and steam explosion are reviewed. 3 figs
Historical aspects of radiation accidents
International Nuclear Information System (INIS)
Mettler, F.A. Jr.; Ricks, R.C.
1990-01-01
Radiation accidents are extremely rare events; however, the last two years have witnessed the largest radiation accidents in both the eastern and western hemispheres. It is the purpose of this chapter to review how radiation accidents are categorized, examine the temporal changes in frequency and severity, give illustrative examples of several types of radiation accidents, and finally, to describe the various registries for radiation accidents
International Nuclear Information System (INIS)
Nakajima, Ken
2003-01-01
Applicability of four simplified methods to evaluate the consequences of criticality accident was investigated. Fissions in the initial burst and total fissions were evaluated using the simplified methods and those results were compared with the past accident data. The simplified methods give the number of fissions in the initial burst as a function of solution volume; however the accident data did not show such tendency. This would be caused by the lack of accident data for the initial burst with high accuracy. For total fissions, simplified almost reproduced the upper envelope of the accidents. However several accidents, which were beyond the applicable conditions, resulted in the larger total fissions than the evaluations. In particular, the Tokai-mura accident in 1999 gave in the largest total specific fissions, because the activation of cooling system brought the relatively high power for a long time. (author)
Enhancing AP1000 reactor accident management capabilities for long term accidents
International Nuclear Information System (INIS)
Jiang Pingting; Liu Mengying; Duan Chengjie; Liao Yehong
2015-01-01
Passive safety actions are considered as main measures under severe accident in AP1000 power plant. However, risk is still existed. According to PSA, several probable scenarios for AP1000 nuclear power plant are analyzed in this paper with MAAP the severe accident analysis code. According to the analysis results, several deficiencies of AP1000 severe accident management are found. The long term cooling and containment depressurization capability for AP1000 power plant appear to be most important factors under such accidents. Then, several temporary strategies for AP1000 power plant are suggested, including PCCWST temporary water supply strategy after 72h, temporary injection strategy for IRWST, hydrogen relief action in fuel building, which would improve the safety of AP1000 power plant. At last, assessments of effectiveness for these strategies are performed, and the results are compared with analysis without these strategies. The comparisons showed that correct actions of these strategies would effectively prevent the accident process of AP1000 power plant. (author)
The Chernobyl accident consequences; Consequences de l'accident de Tchernobyl
Energy Technology Data Exchange (ETDEWEB)
NONE
2001-04-01
Five teen years later, Tchernobyl remains the symbol of the greater industrial nuclear accident. To take stock on this accident, this paper proposes a chronology of the events and presents the opinion of many international and national organizations. It provides also web sites references concerning the environmental and sanitary consequences of the Tchernobyl accident, the economic actions and propositions for the nuclear safety improvement in the East Europe. (A.L.B.)
NIF: Impacts of chemical accidents and comparison of chemical/radiological accident approaches
International Nuclear Information System (INIS)
Lazaro, M.A.; Policastro, A.J.; Rhodes, M.
1996-01-01
The US Department of Energy (DOE) proposes to construct and operate the National Ignition Facility (NIF). The goals of the NIF are to (1) achieve fusion ignition in the laboratory for the first time by using inertial confinement fusion (ICF) technology based on an advanced-design neodymium glass solid-state laser, and (2) conduct high-energy-density experiments in support of national security and civilian applications. The primary focus of this paper is worker-public health and safety issues associated with postulated chemical accidents during the operation of NIF. The key findings from the accident analysis will be presented. Although NIF chemical accidents will be emphasized, the important differences between chemical and radiological accident analysis approaches and the metrics for reporting results will be highlighted. These differences are common EIS facility and transportation accident assessments
Energy Technology Data Exchange (ETDEWEB)
Denman, Matthew R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Brooks, Dusty Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)
2015-08-01
Sandia National Laboratories (SNL) has conducted an uncertainty analysi s (UA) on the Fukushima Daiichi unit (1F1) accident progression wit h the MELCOR code. Volume I of the 1F1 UA discusses the physical modeling details and time history results of the UA. Volume II of the 1F1 UA discusses the statistical viewpoint. The model used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). The goal of this work was to perform a focused evaluation of uncertainty in core damage progression behavior and its effect on key figures - of - merit (e.g., hydrogen production, fraction of intact fuel, vessel lower head failure) and in doing so assess the applicability of traditional sensitivity analysis techniques .
Management of severe accidents
International Nuclear Information System (INIS)
Jankowski, M.W.
1987-01-01
The definition and the multidimensionality aspects of accident management have been reviewed. The suggested elements in the development of a programme for severe accident management have been identified and discussed. The strategies concentrate on the two tiered approaches. Operative management utilizes the plant's equipment and operators capabilities. The recovery managment concevtrates on preserving the containment, or delaying its failure, inhibiting the release, and on strategies once there has been a release. The inspiration for this paper was an excellent overview report on perspectives on managing severe accidents in commercial nuclear power plants and extending plant operating procedures into the severe accident regime; and by the most recent publication of the International Nuclear Safety Advisory Group (INSAG) considering the question of risk reduction and source term reduction through accident prevention, management and mitigation. The latter document concludes that 'active development of accident management measures by plant personnel can lead to very large reductions in source terms and risk', and goes further in considering and formulating the key issue: 'The most fruitful path to follow in reducing risk even further is through the planning of accident management.' (author)
Management of severe accidents
International Nuclear Information System (INIS)
Jankowski, M.W.
1988-01-01
The definition and the multidimensionality aspects of accident management have been reviewed. The suggested elements in the development of a programme for severe accident management have been identified and discussed. The strategies concentrate on the two tiered approaches. Operative management utilizes the plant's equipment and operators capabilities. The recovery management concentrates on preserving the containment, or delaying its failure, inhibiting the release, and on strategies once there has been a release. The inspiration for this paper was an excellent overview report on perspectives on managing severe accidents in commercial nuclear power plants and extending plant operating procedures into the severe accident regime; and by the most recent publication of the International Nuclear Safety Advisory Group (INSAG) considering the question of risk reduction and source term reduction through accident prevention, management and mitigation. The latter document concludes that active development of accident management measures by plant personnel can lead to very large reductions in source terms and risk, and goes further in considering and formulating the key issue: The most fruitful path to follow in reducing risk even further is through the planning of accident management
International Nuclear Information System (INIS)
Gittus, J.H.
1989-01-01
The nuclear industry perspective and the public perspective on big nuclear accidents and leukaemia near nuclear sites are discussed. The industry perspective is that big accidents are so unlikely as to be virtually impossible and that leukaemia is not specifically associated with nuclear installations. Clusters of cancer with statistical significance occur in major cities. The public perspective is coloured by a prejudice and myth: the fear of radiation. The big nuclear accident is seen therefore as much more unacceptable than any other big accident. Risks associated with Sizewell-B nuclear station and the liquid gas depot at Canvey Island are discussed. The facts and figures are presented as tables and graphs. Given conflicting interpretations of the leukaemia problem the public inclines towards the more pessimistic view. (author)
Assessment of accident energetics in LMFBR core-disruptive accidents
International Nuclear Information System (INIS)
Fauske, H.K.
1977-01-01
An assessment of accident energetics in LMFBR core-disruptive accidents is given with emphasis on the generic issues of energetic recriticality and energetic fuel-coolant interaction events. Application of a few general behavior principles to the oxide-fueled system suggests that such events are highly unlikely following a postulated core meltdown event
Database on aircraft accidents
International Nuclear Information System (INIS)
Nishio, Masahide; Koriyama, Tamio
2013-11-01
The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to this issue, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for the latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. In this report the database was revised by adding aircraft accidents in 2011 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2012 database for the latest 20 years from 1992 to 2011. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for the latest 20 years from 1992 to 2011 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2012 revised database for the latest 20 years from 1992 to 2011 shows the followings. The trend of the 2012 database changes little as compared to the last year's report. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. The number of commercial aircraft accidents is 4 for large fixed-wing aircraft, 58 for small fixed-wing aircraft, 5 for large bladed aircraft and 99 for small bladed aircraft. The relevant accidents
International Nuclear Information System (INIS)
1988-01-01
This book is meant to be used as a reference book for information officers at the event of a nuclear accident. The main part is edited in alphabetical order to facilitate use under stress. The book gives a short review of the health risks of radiation, and descriptions of accidents that have occured. The index words that have been chosen for the main part of the book have been selected due to experiences in connection with incidents and accidents. (L.E.)
Occupational Accidents And Preventive Measures
Fassnacht, V
2006-01-01
This report presents the 2005 statistics concerning occupational accidents involving members of the CERN personnel and contractors' personnel. It sets out the accident frequency and severity rates and provides a breakdown of accidents by cause and injury. It also contains a summary analysis of the most serious accidents and the associated recommendations.
International Nuclear Information System (INIS)
Sharafutdinov, Rachet; Lankin, Michail; Kharitonova, Nataliya
2014-01-01
The paper describes a tendency by development of regulatory document requirements related to accident monitoring and accident sampling at Russia's NPPs. Lessons learned from the Fukushima Daiichi accident pointed at the importance and necessary to carry out an additional safety check at Russia's nuclear power plants in the preparedness for management of severe accidents at NPPs. Planned measures for improvement of severe accidents management include development and implementation of the accident instrumentation systems, providing, monitoring, management and storage of information in a severe accident conditions. The draft of Safety Guidelines <
Nuclear accidents and epidemiology
International Nuclear Information System (INIS)
1987-01-01
A consultation on epidemiology related to the Chernobyl accident was held in Copenhagen in May 1987 as a basis for concerted action. This was followed by a joint IAEA/WHO workshop in Vienna, which reviewed appropriate methodologies for possible long-term effects of radiation following nuclear accidents. The reports of these two meetings are included in this volume, and cover the subjects: 1) Epidemiology related to the Chernobyl nuclear accident. 2) Appropriate methodologies for studying possible long-term effects of radiation on individuals exposed in a nuclear accident. Figs and tabs
Reactivity insertion accident analysis
International Nuclear Information System (INIS)
Moreira, J.M.L.; Nakata, H.; Yorihaz, H.
1990-04-01
The correct prediction of postulated accidents is the fundamental requirement for the reactor licensing procedures. Accident sequences and severity of their consequences depend upon the analysis which rely on analytical tools which must be validated against known experimental results. Present work presents a systematic approach to analyse and estimate the reactivity insertion accident sequences. The methodology is based on the CINETHICA code which solves the point-kinetics/thermohydraulic coupled equations with weighted temperature feedback. Comparison against SPERT experimental results shows good agreement for the step insertion accidents. (author) [pt
REAC/TS radiation accident registry. Update of accidents in the United States
International Nuclear Information System (INIS)
Ricks, R.C.; Berger, M.E.; Holloway, E.C.; Goans, R.E.
2000-01-01
Serious injury due to ionizing radiation is a rare occurrence. From 1944 to the present, 243 US accidents meeting dose criteria for classification as serious are documented in the REAC/TS Registry. Thirty individuals have lost their lives in radiation accidents in the United States. The Registry is part of the overall REAC/TS program providing 24-hour direct or consultative assistance regarding medical and heath physics problems associated with radiation accidents in local, national, and international incidents. The REAC/TS Registry serves as a repository of medically important information documenting the consequences of these accidents. Registry data are gathered from various sources. These include reports from the World Heath Organization (WHO), International Atomic Energy Agency (IAEA), US Nuclear Regulatory Commission (US NRC), state radiological health departments, medical/health physics literature, personal communication, the Internet, and most frequently, from calls for medical assistance to REAC/TS, as part of our 24-hour medical assistance program. The REAC/TS Registry for documentation of radiation accidents serves several useful purposes: 1) weaknesses in design, safety practices, training or control can be identified, and trends noted; 2) information regarding the medical consequences of injuries and the efficacy of treatment protocols is available to the treating physician; and 3) Registry case studies serve as valuable teaching tools. This presentation will review and summarize data on the US radiation accidents including their classification by device, accident circumstances, and frequency by respective states. Data regarding accidents with fatal outcomes will be reviewed. The inclusion of Registry data in the IAEA's International Reporting System of Radiation Events (RADEV) will also be discussed. (author)
Directory of Open Access Journals (Sweden)
Hossein Jafari Mansoorian
2016-02-01
Full Text Available Background & Aims of the Study : Accidents in water networks can lead to increase the uncounted water, costs of repair, maintenance, restoration and enter water contaminants to water network. The aim of this study is to survey the accidents of Qom rural water network and choose the right approaches to reduce the number of accidents. Materials & Methods: In this cross-sectional study, four sector of Qom province (Markazi, Dastjerd, Kahak and Qahan, were assessed over a period of 8 months (July – January 2010. This study was conducted through questionnaire of Ministry of Energy. Results: The total number of accidents was 763. The highest number of accidents in the four sectors was related to Markazi sector with 228 accidents. According to the time of the accident, the highest and lowest number of accident was related to September (19.7% and November (6.8%, respectively. According to the location of the accident on network, the highest and lowest number of accident was related to distribution network (64% and connections (17.5% and transmission pipe (18.34%, respectively. According to the type of the accident, the highest and lowest number of accident was related to breaking (47.8% and gasket failure (1.2%, respectively. Considering with the pipes’ material, the highest and lowest number of accident was related to polyethylene pipes (93% and steel and cast iron pipes (0.5%, 0.5%, respectively. Conclusions: Due to the high break rate of Polyethylene pipes, it is recommended to be placed in priority of leak detection and rehabilitation. .
[Diving accidents. Emergency treatment of serious diving accidents].
Schröder, S; Lier, H; Wiese, S
2004-11-01
Decompression injuries are potentially life-threatening incidents mainly due to a rapid decline in ambient pressure. Decompression illness (DCI) results from the presence of gas bubbles in the blood and tissue. DCI may be classified as decompression sickness (DCS) generated from the liberation of gas bubbles following an oversaturation of tissues with inert gas and arterial gas embolism (AGE) mainly due to pulmonary barotrauma. People working under hyperbaric pressure, e.g. in a caisson for general construction under water, and scuba divers are exposed to certain risks. Diving accidents can be fatal and are often characterized by organ dysfunction, especially neurological deficits. They have become comparatively rare among professional divers and workers. However, since recreational scuba diving is gaining more and more popularity there is an increasing likelihood of severe diving accidents. Thus, emergency staff working close to areas with a high scuba diving activity, e.g. lakes or rivers, may be called more frequently to a scuba diving accident. The correct and professional emergency treatment on site, especially the immediate and continuous administration of normobaric oxygen, is decisive for the outcome of the accident victim. The definitive treatment includes rapid recompression with hyperbaric oxygen. The value of adjunctive medication, however, remains controversial.
International Nuclear Information System (INIS)
Canavese, Susana I.
2000-01-01
A criticality accident occurred at 10:35 on September 30, 1999. It occurred in a precipitation tank in a Conversion Test Building at the JCO Tokai Works site in Tokaimura (Tokai Village) in the Ibaraki Prefecture of Japan. STA provisionally rated this accident a 4 on the seven-level, logarithmic International Nuclear Event Scale (INES). The September 30, 1999 criticality accident at the JCO Tokai Works Site in Tokaimura, Japan in described in preliminary, technical detail. Information is based on preliminary presentations to technical groups by Japanese scientists and spokespersons, translations by technical and non-technical persons of technical web postings by various nuclear authorities, and English-language non-technical reports from various news media and nuclear-interest groups. (author)
Accident management information needs
International Nuclear Information System (INIS)
Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R.
1990-04-01
In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs
Accident management information needs
Energy Technology Data Exchange (ETDEWEB)
Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R. (EG and G Idaho, Inc., Idaho Falls, ID (USA))
1990-04-01
In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs.
Marginal abatement cost curves in general equilibrium: The influence of world energy prices
International Nuclear Information System (INIS)
Klepper, Gernot; Peterson, Sonja
2006-01-01
Marginal abatement cost curves (MACCs) are a favorite instrument to analyze international emissions trading. This paper focuses on the question of how to define MACCs in a general equilibrium context where the global abatement level influences energy prices and in turn national MACCs. We discuss the mechanisms theoretically and then use the CGE model DART for quantitative simulations. The result is, that changes in energy prices resulting from different global abatement levels do indeed affect national MACCs. Also, we compare different possibilities of defining MACCs-of which some are robust against changes in energy prices while others vary considerably. (author)
Directory of Open Access Journals (Sweden)
Wedagama D.M.P.
2010-01-01
Full Text Available In Denpasar the capital of Bali Province, motorcycle accident contributes to about 80% of total road accidents. Out of those motorcycle accidents, 32% are fatal accidents. This study investigates the influence of accident related factors on motorcycle fatal accidents in the city of Denpasar during period 2006-2008 using a logistic regression model. The study found that the fatality of collision with pedestrians and right angle accidents were respectively about 0.44 and 0.40 times lower than collision with other vehicles and accidents due to other factors. In contrast, the odds that a motorcycle accident will be fatal due to collision with heavy and light vehicles were 1.67 times more likely than with other motorcycles. Collision with pedestrians, right angle accidents, and heavy and light vehicles were respectively accounted for 31%, 29%, and 63% of motorcycle fatal accidents.
International Nuclear Information System (INIS)
Marshall, W.; Billingon, D.E.; Cameron, R.F.; Curl, S.J.
1983-09-01
Much of the debate on the safety of nuclear power focuses on the large number of fatalities that could, in theory, be caused by extremely unlikely but just imaginable reactor accidents. This, along with the nuclear industry's inappropriate use of vocabulary during public debate, has given the general public a distorted impression of the risks of nuclear power. The paper reviews the way in which the probability and consequences of big nuclear accidents have been presented in the past and makes recommendations for the future, including the presentation of the long-term consequences of such accidents in terms of 'loss of life expectancy', 'increased chance of fatal cancer' and 'equivalent pattern of compulsory cigarette smoking'. The paper presents mathematical arguments, which show the derivation and validity of the proposed methods of presenting the consequences of imaginable big nuclear accidents. (author)
The Uncertainty Test for the MAAP Computer Code
International Nuclear Information System (INIS)
Park, S. H.; Song, Y. M.; Park, S. Y.; Ahn, K. I.; Kim, K. R.; Lee, Y. J.
2008-01-01
After the Three Mile Island Unit 2 (TMI-2) and Chernobyl accidents, safety issues for a severe accident are treated in various aspects. Major issues in our research part include a level 2 PSA. The difficulty in expanding the level 2 PSA as a risk information activity is the uncertainty. In former days, it attached a weight to improve the quality in a internal accident PSA, but the effort is insufficient for decrease the phenomenon uncertainty in the level 2 PSA. In our country, the uncertainty degree is high in the case of a level 2 PSA model, and it is necessary to secure a model to decrease the uncertainty. We have not yet experienced the uncertainty assessment technology, the assessment system itself depends on advanced nations. In advanced nations, the severe accident simulator is implemented in the hardware level. But in our case, basic function in a software level can be implemented. In these circumstance at home and abroad, similar instances are surveyed such as UQM and MELCOR. Referred to these instances, SAUNA (Severe Accident UNcertainty Analysis) system is being developed in our project to assess and decrease the uncertainty in a level 2 PSA. It selects the MAAP code to analyze the uncertainty in a severe accident
Radiological accidents in medical practice
International Nuclear Information System (INIS)
Cardenas Herrera, Juan
2012-01-01
Different radiological accidents that may occur in medical practice are shown. The following topics are focused: accident statistics for medical exposure, accidental medical exposures, radiotherapy accidents and potential accidental scenarios [es
Kiebel
1972-01-01
Le Docteur Kiebel, chirurgien à Genève, est aussi un grand ami de sport et de temps en temps médecin des classes genevoises de ski et également médecin de l'équipe de hockey sur glace de Genève Servette. Il est bien qualifié pour nous parler d'accidents de sport et surtout d'accidents de ski.
[Accidents in travellers - the hidden epidemic].
Walz, Alexander; Hatz, Christoph
2013-06-01
The risk of malaria and other communicable diseases is well addressed in pre-travel advice. Accidents are usually less discussed. Thus, we aimed at assessing accident figures for the Swiss population, based on data of the register from 2004 to 2008 of the largest Swiss accident insurance organization (SUVA). More than 139'000 accidents over 5 years showed that 65 % of the accidents overseas are injuries, and 24 % are caused by poisoning or harm by cold, heat or air pressure. Most accidents happened during leisure activities or sports. More than one third of the non-lethal and more than 50 % of the fatal accidents happened in Asia. More than three-quarters of non-lethal accidents take place in people between 25 and 54 years. One out of 74 insured persons has an accident abroad per year. Despite of many analysis short-comings of the data set with regard to overseas travel, the figures document the underestimated burden of disease caused by accidents abroad and should affect the given pre-health advice.
Occupational accidents among mototaxi drivers.
Amorim, Camila Rego; de Araújo, Edna Maria; de Araújo, Tânia Maria; de Oliveira, Nelson Fernandes
2012-03-01
The use of motorcycles as a means of work has contributed to the increase in traffic accidents, in particular, mototaxi accidents. The aim of this study was to estimate and characterize the incidence of occupational accidents among the mototaxis registered in Feira de Santana, BA. This is a cross-sectional study with descriptive and census data. Of the 300 professionals registered at the Municipal Transportation Service, 267 professionals were interviewed through a structured questionnaire. Then, a descriptive analysis was conducted and the incidence of accidents was estimated based on the variables studied. Relative risks were calculated and statistical significance was determined using the chi-square test and Fisher's exact test, considering p accidents were observed in 10.5% of mototaxis. There were mainly minor injuries (48.7%), 27% of them requiring leaves of absence from work. There was an association between the days of work per week, fatigue in lower limbs and musculoskeletal complaints, and accidents. Knowledge of the working conditions and accidents involved in this activity can be of great importance for the adoption of traffic education policies, and to help prevent accidents by improving the working conditions and lives of these professionals.
International Nuclear Information System (INIS)
Yang Ling
2011-01-01
Nuclear accident assessment is one of the bases for emergency decision-making in the situation of nuclear accident in NPP. Usually, the assessment includes accident status and consequence assessment. It is accident status assessment, and its application in emergency decision-making is introduced here. (author)
Severe accident management. Prevention and Mitigation
International Nuclear Information System (INIS)
1992-01-01
Effective planning for the management of severe accidents at nuclear power plants can produce both a reduction in the frequency of such accidents as well as the ability to mitigate their consequences if and when they should occur. This report provides an overview of accident management activities in OECD countries. It also presents the conclusions of a group of international experts regarding the development of accident management methods, the integration of accident management planning into reactor operations, and the benefits of accident management
The handling of radiation accidents
International Nuclear Information System (INIS)
1977-01-01
The symposium was attended by 204 participants from 39 countries and 5 international organizations. Forty-two papers were presented in 8 sessions. The purpose of the meeting was to foster an exchange of experiences gained in establishing and exercising plans for mitigating the effects of radiation accidents and in the handling of actual accident situations. Only a small number of accidents were reported at the symposium, and this reflects the very high standards of safety that has been achieved by the nuclear industry. No accidents of radiological significance were reported to have occurred at commercial nuclear power plants. Of the accidents reported, industrial radiography continues to be the area in which most of the radiation accidents occur. The experience gained in the reported accident situations served to confirm the crucial importance of the prompt availability of medical and radiological services, particularly in the case of uptake of radioactive material, and emphasized the importance of detailed investigation into the causes of the accident in order to improve preventative measures. One of the principal themes of the symposium involved emergency procedures related to nuclear power plant accidents, and several papers defining the scope, progression and consequences of design base accidents for both thermal and fast reactor systems were presented. These were complemented by papers defining the resultant protection requirements that should be satisfied in the establishment of plans designed to mitigate the effects of the postulated accident situations. Several papers were presented describing existing emergency organizational arrangements relating both to specific nuclear power plants and to comprehensive national schemes, and a particularly informative session was devoted to the topic of training of personnel in the practical conduct of emergency arrangements. The general feeling of the participants was one of studied confidence in the competence and
Casebook on electric safety accidents
International Nuclear Information System (INIS)
1987-09-01
This book gives concentration on electric safety accidents in domestic and abroad, which introduces general electrical safety with property of electricity, safe equipment and maintenance and protection of electric shock. It lists the cases of accident caused of electricity in domestic like accident in power substation, utilization equipment, load system and another accident by electricity like death in electric shock another by electricity like death in electric shock in new building construction, the cases caused of electricity in abroad like damage in electric shock by high voltage electric transformer, electric shock in summer and earth fault accident by fault cooling tower.
Radiological accidents balance in medicine
International Nuclear Information System (INIS)
Nenot, J.C.
1995-01-01
This work deals with the radiological accidents in medicine. In medicine, the radiation accidents on medical personnel and patients can be the result of over dosage and bad focusing of radiotherapy sealed sources. Sometimes, the accidents, if they are unknown during a time enough for the source to be spread and to expose a lot of persons (in the case of source dismantling for instance) can take considerable dimensions. Others accidents can come from bad handling of linear accelerators and from radionuclide kinetics in some therapies. Some examples of accidents are given. (O.L.). 11 refs
Kim, Tae-gu; Kang, Young-sig; Lee, Hyung-won
2011-01-01
To begin a zero accident campaign for industry, the first thing is to estimate the industrial accident rate and the zero accident time systematically. This paper considers the social and technical change of the business environment after beginning the zero accident campaign through quantitative time series analysis methods. These methods include sum of squared errors (SSE), regression analysis method (RAM), exponential smoothing method (ESM), double exponential smoothing method (DESM), auto-regressive integrated moving average (ARIMA) model, and the proposed analytic function method (AFM). The program is developed to estimate the accident rate, zero accident time and achievement probability of an efficient industrial environment. In this paper, MFC (Microsoft Foundation Class) software of Visual Studio 2008 was used to develop a zero accident program. The results of this paper will provide major information for industrial accident prevention and be an important part of stimulating the zero accident campaign within all industrial environments.
Occupational accidents aboard merchant ships
DEFF Research Database (Denmark)
Hansen, H.L.; Nielsen, D.; Frydenberg, Morten
2002-01-01
Objectives: To investigate the frequency, circumstances, and causes of occupational accidents aboard merchant ships in international trade, and to identify risk factors for the occurrence of occupational accidents as well as dangerous working situations where possible preventive measures may...... be initiated. Methods: The study is a historical follow up on occupational accidents among crew aboard Danish merchant ships in the period 1993–7. Data were extracted from the Danish Maritime Authority and insurance data. Exact data on time at risk were available. Results: A total of 1993 accidents were...... aboard. Relative risks for notified accidents and accidents causing permanent disability of 5% or more were calculated in a multivariate analysis including ship type, occupation, age, time on board, change of ship since last employment period, and nationality. Foreigners had a considerably lower recorded...
Cernavoda CANDU severe accident evaluation
International Nuclear Information System (INIS)
Negut, G.; Marin, A.
1997-01-01
The papers present the activities dedicated to Romania Cernavoda Nuclear Power Plant first CANDU Unit severe accident evaluation. This activity is part of more general PSA assessment activities. CANDU specific safety features are calandria moderator and calandria vault water capabilities to remove the residual heat in the case of severe accidents, when the conventional heat sinks are no more available. Severe accidents evaluation, that is a deterministic thermal hydraulic analysis, assesses the accidents progression and gives the milestones when important events take place. This kind of assessment is important to evaluate to recovery time for the reactor operators that can lead to the accident mitigation. The Cernavoda CANDU unit is modeled for the of all heat sinks accident and results compared with the AECL CANDU 600 assessment. (orig.)
Energy Technology Data Exchange (ETDEWEB)
Moon, Sung Bo; Lim, Soo Min; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)
2016-10-15
K-DEMO (Korean fusion demonstration reactor) is future reactor for the commercializing the fusion power generation. The Design of K-DEMO is similar to that of ITER but the fusion energy generation is much bigger because ITER is experimental reactor. For this reason, K-DEMO uses more fusion reaction with bigger amount of tritium. Higher fusion power means more neutron generation that can irradiate the structure around fusion plasma. Fusion reactor can produce many kinds of radioactive material in the accident. Because of this hazard, preliminary safety analysis is mandatory before its construction. Concern for safety problem of accident of fusion/fission reactor has been growing after Fukushima accident which is severe accident from unexpected disaster. To model the primary heat transfer system, in this study, MARS-KS thermal hydraulic analysis is referred. Lee et al. and Kim et al. conducted thermal hydraulic analysis using MARS-KS and multiple module simulation to deal with the phenomena of first wall corrosion for each plasma pulse. This study shows the relationship between vacuum vessel rupture area and source term leakage after hydrogen explosion. For the conservative study, first wall heating is not terminated because the heating inside the vacuum vessel increase the pressure inside VV. Pressurizer, steam generator and turbine is not damaged. 6.69 kg of tritiated water (HTO) and 1 ton of dust is modeled which is ITER guideline. The entire system of K-DEMO is smaller than that of ITER. For this reason, lots of aerosol is release into environment although the safety system like DS is maintained. This result shows that the safety system of K-DEMO should use much more safety system.
International Nuclear Information System (INIS)
Wu, Xiaoli; Li, Wei; Wang, Yang; Zhang, Yapei; Tian, Wenxi; Su, Guanghui; Qiu, Suizheng; Liu, Tong; Deng, Yongjun; Huang, Heng
2015-01-01
Highlights: • Analysis of severe accident scenarios for a PWR fueled with ATF system is performed. • A large-break LOCA without ECCS is analyzed for the PWR fueled with ATF system. • Extended SBO cases are discussed for the PWR fueled with ATF system. • The accident-tolerance of ATF system for application in PWR is illustrated. - Abstract: Experience gained in decades of nuclear safety research and previous nuclear accidents direct to the investigation of passive safety system design and accident-tolerant fuel (ATF) system which is now becoming a hot research point in the nuclear energy field. The ATF system is aimed at upgrading safety characteristics of the nuclear fuel and cladding in a reactor core where active cooling has been lost, and is preferable or comparable to the current UO 2 –Zr system when the reactor is in normal operation. By virtue of advanced materials with improved properties, the ATF system will obviously slow down the progression of accidents, allowing wider margin of time for the mitigation measures to work. Specifically, the simulation and analysis of a large break loss of coolant accident (LBLOCA) without ECCS and extended station blackout (SBO) severe accident are performed for a pressurized water reactor (PWR) loaded with ATF candidates, to reflect the accident-tolerance of ATF
HCCR TBS steady state calculation by using GAMMA-FR and MELCOR
International Nuclear Information System (INIS)
Jin, Hyung Gon; Ahn, Mu-Young
2016-01-01
KAERI has participated in the development of HCCR (Helium Cooled Ceramic Reflector) TBS (Test Blanket System) as a member of the KO TBM Team. Conceptual design review of this system had been performed in 2015 and after resolving the chits, the final approval was achieved in March 2016. This safety issue is one of the category II chits in the CDR and resolution strategy was already approved, however, safety analysis should be done until PDR (Preliminary Design Review). In this paper, model and nodalization for the accident are given and preliminary result is included. Nominal design pressure of HCS loop is 8 MPa, therefore, as indicated in the figure below. During the break of cooling pipe between TBM and Shield, the high pressure coolant will ingress to the 'interspace' between TBM, Shield and Frame. The coolant will be released through the front gaps between TBM and Frame towards VV primary vacuum. Accident analysis about HCCR TBS LOCA and ICE into small confined volume has been done successfully. Inverspace volume is compatibly small volume for 8MPa helium loop rupture, which causes fast pressure build-up the space but it decrease within 10 seconds. It is expected that other type of TBM has almost the same behavior. Safety judgment to this temporary over press should be discussed with IO
A Study on the Operation Strategy for Combined Accident including TLOFW accident
International Nuclear Information System (INIS)
Kim, Bo Gyung; Kang, Gook Young; Yoon, Ho Joon
2014-01-01
It is difficult for operators to recognize the necessity of a feed-and-bleed (F-B) operation when the loss of coolant accident and failure of secondary side occur. An F-B operation directly cools down the reactor coolant system (RCS) using the primary cooling system when residual heat removal by the secondary cooling system is not available. The plant is not always necessary the F-B operation when the secondary side is failed. It is not necessary to initiate an F-B operation in the case of a medium or large break because these cases correspond to low RCS pressure sequences when the secondary side is failed. If the break size is too small to sufficiently decrease the RCS pressure, the F-B operation is necessary. Therefore, in the case of a combined accident including a secondary cooling system failure, the provision of clear information will play a critical role in the operators' decision to initiate an F-B operation. This study focuses on the how we establish the operation strategy for combined accident including the failure of secondary side in consideration of plant and operating conditions. Previous studies have usually focused on accidents involving a TLOFW accident. The plant conditions to make the operators confused seriously are usually the combined accident because the ORP only focuses on a single accident and FRP is less familiar with operators. The relationship between CET and PCT under various plant conditions is important to decide the limitation of initiating the F-B operation to prevent core damage
Enhancement of weld failure and tube ejection model in PENTAP program
International Nuclear Information System (INIS)
Jung, Jaehoon; An, Sang Mo; Ha, Kwang Soon; Kim, Hwan Yeol
2014-01-01
The reactor vessel pressure, the debris mass, the debris temperature, and the component of material can have an effect on the penetration tube failure modes. Furthermore, these parameters are interrelated. There are some representative severe accident codes such as MELCOR, MAAP, and PENTAP program. MELCOR decides on a penetration tube failure by its failure temperature such as 1273K simply. MAAP considers all penetration failure modes and has the most advanced model for a penetration tube failure model. However, the validation work against the experimental data is very limited. PENTAP program which evaluates the possible penetration tube failure modes such as creep failure, weld failure, tube ejection, and a long term tube failure under given accident condition was developed by KAERI. The experiment for the tube ejection is being performed by KAERI. The temperature distribution and the ablation rate of both weld and lower vessel wall can be obtained through the experiment. This paper includes the updated calculation steps for the weld failure and the tube ejection modes of the PENTAP program to apply the experimental results. PENTAP program can evaluate the possible penetration tube failure modes. It still requires a large amount of efforts to increase the prediction of failure modes. Some calculation steps are necessary for applying the experimental and the numerical data in the PENTAP program. In this study, new calculation steps are added to PENTAP program to enhance the weld failure and tube ejection models using KAERI's experimental data which are the ablation rate and temperature distribution of weld and lower vessel wall
Accidents in making fireworks. Tapaturmat polttopuun teossa
Energy Technology Data Exchange (ETDEWEB)
Solmio, H
1991-01-01
The accidents and the trends in the number of accidents and their causes were analyzed in a study conducted by the Forestry Department of the Work Efficiency Institute. The study was funded by the Finnish Agricultural Enterpreneurs' Pension Fund (MELA). The study material was selected from MELA's accident stage work and cause code. Altogether, the material comprised the following accidents that occurred while making and using firewood: 671 accidents in 1987 and 596 accidents in 1988. The amount of accidents caused by the working environment and hand tools was clearly higher in 1987 than in 1988. The number of accidents occurred while chopping wood was 20 % higher in 1987 than in 1988. April was the most accident-prone month both in 1987 and in 1988. Chopping of firewood was the most dangerous work stage in terms of the number of accidents. In 1988, the number of accidents in chopping firewood was 336, in sawing using circular saw 97 cases and other mechanized chopping led to 93 accidents. Heating with wood caused 33 accidents. In 1988 there were 10 (2 %) accidents involving loss of limbs and 9 of them occurred in the mechanized chopping of firewood. Nine accidents of these involved the loss of one or more fingers. Serious accidents, leading to inability to work for more than 3 months, were most frequent in chopping and in storing firewood.
International Nuclear Information System (INIS)
Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo
2013-01-01
To assess the complex situations regarding the severe accidents such as what observed in Fukushima Accident, not only radiation protection aspects but also relevant aspects: health, environmental, economic and societal aspects; must be all included into the consequence assessment. In this study, the authors introduce the “cost per severe accident” as an index to analyze the consequences of severe accidents comprehensively. The cost per severe accident consists of various costs and consequences converted into monetary values. For the purpose of improvement of the accident protection and consequence mitigation strategies, the costs needed to introduce the protective actions, and health and psychological consequences are included in the present study. The evaluations of these costs and consequences were made based on the systematic consequence analysis using level 2 and 3 probabilistic safety assessment (PSA) codes. The accident sequences used in this analysis were taken from the results of level 2 seismic PSA of a virtual 1,100 MWe BWR-5. The doses to the public and the number of people affected were calculated using the level 3 PSA code OSCAAR of Japan Atomic Energy Agency (JAEA). The calculations have been made for 248 meteorological sequences, and the outputs are given as expectation values for various meteorological conditions. Using these outputs, the cost per severe accident is calculated based on the open documents on the Fukushima Accident regarding the cost of protective actions and compensations for psychological harms. Finally, optimized accident protection and consequence mitigation strategies are recommended taking into account the various aspects comprehensively using the cost per severe accident. The authors must emphasize that the aim is not to estimate the accident cost itself but to extend the scope of “risk-informed decision making” for continuous safety improvements of nuclear energy. (author)
Cheng, Andy S K; Ng, Terry C K; Lee, Hoe C
2011-07-01
Hazard perception is the ability to read the road and is closely related to involvement in traffic accidents. It consists of both cognitive and behavioral components. Within the cognitive component, visual attention is an important function of driving whereas driving behavior, which represents the behavioral component, can affect the hazard perception of the driver. Motorcycle riders are the most vulnerable types of road user. The primary purpose of this study was to deepen our understanding of the correlation of different subtypes of visual attention and driving violation behaviors and their effect on hazard perception between accident-free and accident-involved motorcycle riders. Sixty-three accident-free and 46 accident-involved motorcycle riders undertook four neuropsychological tests of attention (Digit Vigilance Test, Color Trails Test-1, Color Trails Test-2, and Symbol Digit Modalities Test), filled out the Chinese Motorcycle Rider Driving Violation (CMRDV) Questionnaire, and viewed a road-user-based hazard situation with an eye-tracking system to record the response latencies to potentially dangerous traffic situations. The results showed that both the divided and selective attention of accident-involved motorcycle riders were significantly inferior to those of accident-free motorcycle riders, and that accident-involved riders exhibited significantly higher driving violation behaviors and took longer to identify hazardous situations compared to their accident-free counterparts. However, the results of the regression analysis showed that aggressive driving violation CMRDV score significantly predicted hazard perception and accident involvement of motorcycle riders. Given that all participants were mature and experienced motorcycle riders, the most plausible explanation for the differences between them is their driving style (influenced by an undesirable driving attitude), rather than skill deficits per se. The present study points to the importance of
Consequence analysis for nuclear reactors, Yongbyon
International Nuclear Information System (INIS)
Kang, Taewook; Jae, Moosung
2017-01-01
Since the Fukushima nuclear power plant accidents in 2011, there have been an increased public anxiety about the safety of nuclear power plants in Korea. The lack of safeguards and facility aging issues at the Yongbyon nuclear facilities have increased doubts. In this study, the consequence analysis for the 5-MWe graphite-moderated reactor in North Korea was performed. Various accident scenarios including accidents at the interim spent fuel pool in the 5-MWe reactor have been developed and evaluated quantitatively. Since data on the design and safety system of nuclear facilities are currently insufficient, the release fractions were set by applying the alternative source terms made for utilization in the analysis of a severe accident by integrating the results of studies of severe accidents occurred before. The calculation results show the early fatality zero deaths and latent cancer fatality about only 13 deaths in Seoul. Thus, actual impacts of a radiological release will be psychological in terms of downwind perceptions and anxiety on the part of potentially exposed populations. Even considering the simultaneous accident occurrence in both 5-MWe graphite-moderated reactor and 100-MWt light water reactor, the consequence analysis using the MACCS2 code shows no significant damage to people in South Korea. (author)
International Nuclear Information System (INIS)
Denning, R.S.
1986-01-01
The purpose of this paper is to provide an overview of severe accident behavior. The term source term is defined and a brief history of the regulatory use of source term is presented. The processes in severe accidents in light water reactors are described with particular emphasis on the relationships between accident thermal-hydraulics and chemistry. Those factors which have the greatest impact on predicted source terms are identified. Design differences between plants that affect source term estimation are also described. The principal unresolved issues are identified that are the focus of ongoing research and debate in the technical community
Construction industry accidents in Spain.
Camino López, Miguel A; Ritzel, Dale O; Fontaneda, Ignacio; González Alcantara, Oscar J
2008-01-01
This paper analyzed industrial accidents that take place on construction sites and their severity. Eighteen variables were studied. We analyzed the influence of each of these with respect to the severity and fatality of the accident. This descriptive analysis was grounded in 1,630,452 accidents, representing the total number of accidents suffered by workers in the construction sector in Spain over the period 1990-2000. It was shown that age, type of contract, time of accident, length of service in the company, company size, day of the week, and the remainder of the variables under analysis influenced the seriousness of the accident. IMPACT ON INJURY PREVENTION: The results obtained show that different training was needed, depending on the severity of accidents, for different age, length of service in the company, organization of work, and time when workers work. The research provides an insight to the likely causes of construction injuries in Spain. As a result of the analysis, industries and governmental agencies in Spain can start to provide appropriate strategies and training to the construction workers.
International Nuclear Information System (INIS)
McKenna, T.J.; Martin, J.A.; Miller, C.W.; Hively, L.M.; Sharpe, R.W.; Giitter, J.G.; Watkins, R.M.
1987-02-01
This pilot training manual has been written to fill the need for a general text on NRC response to reactor accidents. The manual is intended to be the foundation for a course for all NRC response personnel. Severe Reactor Accident Overview is the second in a series of volumes that collectively summarize the US Nuclear Regulatory Commission (NRC) emergency response during severe power reactor accidents and provide necessary background information. This volume describes elementary perspectives on severe accidents and accident assesment. Each volume serves, respectively, as the text for a course of instruction in a series of courses. Each volume is accompanied by an appendix of slides that can be used to present this material. The slides are called out in the text
Lessons learned from accidents investigations
Energy Technology Data Exchange (ETDEWEB)
Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J
1997-12-31
Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)