WorldWideScience

Sample records for ma08 quabbin reservoir

  1. The Quabbin controlled deer hunt 1991 - 2001: limitations of a controlled hunt

    Science.gov (United States)

    Beth E. Cohen; David K. Loomis

    2003-01-01

    The Quabbin Reservoir, built in the 1930's as a water supply for Boston, is an unfiltered source of water. The agency responsible for managing the reservoir wants it to remain unfiltered. As a result, human activity is kept to a minimum, including (until recently) a prohibition on hunting. The lack of natural predators and the ban on recreational hunting allowed...

  2. Reservoir

    Directory of Open Access Journals (Sweden)

    M. Mokhtar

    2016-12-01

    Full Text Available Scarab field is an analog for the deep marine slope channels in Nile Delta of Egypt. It is one of the Pliocene reservoirs in West delta deep marine concession. Channel-1 and channel-2 are considered as main channels of Scarab field. FMI log is used for facies classification and description of the channel subsequences. Core data analysis is integrated with FMI to confirm the lithologic response and used as well for describing the reservoir with high resolution. A detailed description of four wells penetrated through both channels lead to define channel sequences. Some of these sequences are widely extended within the field under study exhibiting a good correlation between the wells. Other sequences were of local distribution. Lithologic sequences are characterized mainly by fining upward in Vshale logs. The repetition of these sequences reflects the stacking pattern and high heterogeneity of the sandstone reservoir. It also refers to the sea level fluctuation which has a direct influence to the facies change. In terms of integration of the previously described sequences with a high resolution seismic data a depositional model has been established. The model defines different stages of the channel using Scarab-2 well as an ideal analog.

  3. Reservoir geochemistry. A reservoir engineering perspective

    Energy Technology Data Exchange (ETDEWEB)

    England, W.A. [BP Exploration, Chertsey Road, Sunbury-on-Thames, Middlesex, TW16 7LN (United Kingdom)

    2007-09-15

    This paper reviews the applications of reservoir geochemistry from a reservoir engineering point of view. Some of the main tasks of reservoir engineering are discussed with an emphasis on the importance of appraising reservoirs in the pre-development stage. A brief review of the principal methods and applications of reservoir geochemistry are given, in the context of applications to reservoir engineering problems. The importance of compositional differences in fluid samples from different depths or spatial locations is discussed in connection with the identification of internal flow barriers. The importance of understanding the magnitude and origin of vertical compositional gradients is emphasised because of possible confusion with purely lateral changes. The geochemical origin and rate of dissipation of compositional differences over geological time is discussed. Geochemical techniques suitable for bulk petroleum fluid samples include GC fingerprinting, GCMS, isotopic and PVT measurements. Core sample petroleum extracts may also be studied by standard geochemical methods but with the added complication of possible contamination by drilling mud. Aqueous phase residual salt extracts can be studied by strontium isotope analysis from core samples. Petroleum fluid inclusions allow the possibility of establishing the composition of paleo-accumulations. The problems in predicting flow barriers from geochemical measurements are discussed in terms of 'false positives' and 'false negatives'. Suggestions are made for areas that need further development in order to encourage the wider acceptance and application of reservoir geochemistry by the reservoir engineering community. The importance of integrating all available data is emphasised. Reservoir geochemistry may be applied to a range of practical engineering problems including production allocation, reservoir compartmentalisation, and the prediction of gravitational gradients. In this review

  4. Large reservoirs: Chapter 17

    Science.gov (United States)

    Miranda, Leandro E.; Bettoli, Phillip William

    2010-01-01

    Large impoundments, defined as those with surface area of 200 ha or greater, are relatively new aquatic ecosystems in the global landscape. They represent important economic and environmental resources that provide benefits such as flood control, hydropower generation, navigation, water supply, commercial and recreational fisheries, and various other recreational and esthetic values. Construction of large impoundments was initially driven by economic needs, and ecological consequences received little consideration. However, in recent decades environmental issues have come to the forefront. In the closing decades of the 20th century societal values began to shift, especially in the developed world. Society is no longer willing to accept environmental damage as an inevitable consequence of human development, and it is now recognized that continued environmental degradation is unsustainable. Consequently, construction of large reservoirs has virtually stopped in North America. Nevertheless, in other parts of the world construction of large reservoirs continues. The emergence of systematic reservoir management in the early 20th century was guided by concepts developed for natural lakes (Miranda 1996). However, we now recognize that reservoirs are different and that reservoirs are not independent aquatic systems inasmuch as they are connected to upstream rivers and streams, the downstream river, other reservoirs in the basin, and the watershed. Reservoir systems exhibit longitudinal patterns both within and among reservoirs. Reservoirs are typically arranged sequentially as elements of an interacting network, filter water collected throughout their watersheds, and form a mosaic of predictable patterns. Traditional approaches to fisheries management such as stocking, regulating harvest, and in-lake habitat management do not always produce desired effects in reservoirs. As a result, managers may expend resources with little benefit to either fish or fishing. Some locally

  5. Improved reservoir exploitation

    Energy Technology Data Exchange (ETDEWEB)

    Thomassen, P.R. [IKU Petroleumsforskning A/S, Trondheim (Norway)

    1996-12-31

    This paper deals with reservoir exploitation and it highlights some ideas on how to improve exploitive skills to optimise the recovery of a field. The author looks closer at what needs to be done to optimise the reservoir data and the exploitation tools, and what are the needs of the reservoir production management. 2 refs., 3 figs.

  6. Status of Wheeler Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This is one in a series of status reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Wheeler Reservoir summarizes reservoir purposes and operation, reservoir and watershed characteristics, reservoir uses and use impairments, and water quality and aquatic biological conditions. The information presented here is from the most recent reports, publications, and original data available. If no recent data were available, historical data were summarized. If data were completely lacking, environmental professionals with special knowledge of the resource were interviewed. 12 refs., 2 figs.

  7. Status of Cherokee Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This is the first in a series of reports prepared by Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overviews of Cherokee Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports, publications, and data available, and interviews with water resource professionals in various Federal, state, and local agencies and in public and private water supply and wastewater treatment facilities. 11 refs., 4 figs., 1 tab.

  8. Status of Cherokee Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This is the first in a series of reports prepared by Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overviews of Cherokee Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports, publications, and data available, and interviews with water resource professionals in various Federal, state, and local agencies and in public and private water supply and wastewater treatment facilities. 11 refs., 4 figs., 1 tab.

  9. Transport of reservoir fines

    DEFF Research Database (Denmark)

    Yuan, Hao; Shapiro, Alexander; Stenby, Erling Halfdan

    Modeling transport of reservoir fines is of great importance for evaluating the damage of production wells and infectivity decline. The conventional methodology accounts for neither the formation heterogeneity around the wells nor the reservoir fines’ heterogeneity. We have developed an integral...... dispersion equation in modeling the transport and the deposition of reservoir fines. It successfully predicts the unsymmetrical concentration profiles and the hyperexponential deposition in experiments....

  10. Integrated reservoir interpretation

    Energy Technology Data Exchange (ETDEWEB)

    Caamano, Ed; Dickerman, Ken; Thornton, Mick (Conoco Indonesia Inc., Jakarta (Indonesia)); Corbett, Chip; Douglas, David; Schultz, Phil (GeoQuest, Houston, TX (United States)); Gir, Roopa; Nicholson, Barry (GeoQuest, Jakarta (Indonesia)); Martono, Dwi; Padmono, Joko; Novias; Kiagus; Suroso, Sigit (Pertamina Sumbagut, Brandan, North Sumatra (Indonesia)); Mathieu, Gilles (Etudes et Productions Schlumberger, Clamart (France)); Yan, Zhao (China National Petroleum Company, Beijing (China))

    1994-07-01

    Improved reservoir management often relies on linking a variety of application software that helps geoscientists handle, visualize and interpret massive amounts of diverse data. The goal is to obtain the best possible reservoir model so its behavior can be understood and optimized. But diverse application software creates specialty niches and discourages integrated interpretation. A description is given of a new reservoir management package that covers all required functionalities and encourages the geologist, geophysicist, petrophysicist and reservoir engineer to embrace the integrated approach. Case studies are included in the article. 21 figs., 13 refs.

  11. Reservoir Engineering Management Program

    Energy Technology Data Exchange (ETDEWEB)

    Howard, J.H.; Schwarz, W.J.

    1977-12-14

    The Reservoir Engineering Management Program being conducted at Lawrence Berkeley Laboratory includes two major tasks: 1) the continuation of support to geothermal reservoir engineering related work, started under the NSF-RANN program and transferred to ERDA at the time of its formation; 2) the development and subsequent implementation of a broad plan for support of research in topics related to the exploitation of geothermal reservoirs. This plan is now known as the GREMP plan. Both the NSF-RANN legacies and GREMP are in direct support of the DOE/DGE mission in general and the goals of the Resource and Technology/Resource Exploitation and Assessment Branch in particular. These goals are to determine the magnitude and distribution of geothermal resources and reduce risk in their exploitation through improved understanding of generically different reservoir types. These goals are to be accomplished by: 1) the creation of a large data base about geothermal reservoirs, 2) improved tools and methods for gathering data on geothermal reservoirs, and 3) modeling of reservoirs and utilization options. The NSF legacies are more research and training oriented, and the GREMP is geared primarily to the practical development of the geothermal reservoirs. 2 tabs., 3 figs.

  12. Dynamic reservoir well interaction

    NARCIS (Netherlands)

    Sturm, W.L.; Belfroid, S.P.C.; Wolfswinkel, O. van; Peters, M.C.A.M.; Verhelst, F.J.P.C.M.

    2004-01-01

    In order to develop smart well control systems for unstable oil wells, realistic modeling of the dynamics of the well is essential. Most dynamic well models use a semi-steady state inflow model to describe the inflow of oil and gas from the reservoir. On the other hand, reservoir models use steady s

  13. Geothermal reservoir engineering research

    Science.gov (United States)

    Ramey, H. J., Jr.; Kruger, P.; Brigham, W. E.; London, A. L.

    1974-01-01

    The Stanford University research program on the study of stimulation and reservoir engineering of geothermal resources commenced as an interdisciplinary program in September, 1972. The broad objectives of this program have been: (1) the development of experimental and computational data to evaluate the optimum performance of fracture-stimulated geothermal reservoirs; (2) the development of a geothermal reservoir model to evaluate important thermophysical, hydrodynamic, and chemical parameters based on fluid-energy-volume balances as part of standard reservoir engineering practice; and (3) the construction of a laboratory model of an explosion-produced chimney to obtain experimental data on the processes of in-place boiling, moving flash fronts, and two-phase flow in porous and fractured hydrothermal reservoirs.

  14. Modeling vapor dominated geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Marconcini, R.; McEdwards, D.; Neri, G.; Ruffilli, C.; Schroeder, R.; Weres, O.; Witherspoon, P.

    1977-09-12

    The unresolved questions with regard to vapor-dominated reservoir production and longevity are reviewed. The simulation of reservoir behavior and the LBL computer program are discussed. The geology of Serrazzano geothermal field and its reservoir simulation are described. (MHR)

  15. Reservoir characterization of Pennsylvanian sandstone reservoirs. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1995-02-01

    This final report summarizes the progress during the three years of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description; (ii) scale-up procedures; (iii) outcrop investigation. The first section describes the methods by which a reservoir can be described in three dimensions. The next step in reservoir description is to scale up reservoir properties for flow simulation. The second section addresses the issue of scale-up of reservoir properties once the spatial descriptions of properties are created. The last section describes the investigation of an outcrop.

  16. Session: Reservoir Technology

    Energy Technology Data Exchange (ETDEWEB)

    Renner, Joel L.; Bodvarsson, Gudmundur S.; Wannamaker, Philip E.; Horne, Roland N.; Shook, G. Michael

    1992-01-01

    This session at the Geothermal Energy Program Review X: Geothermal Energy and the Utility Market consisted of five papers: ''Reservoir Technology'' by Joel L. Renner; ''LBL Research on the Geysers: Conceptual Models, Simulation and Monitoring Studies'' by Gudmundur S. Bodvarsson; ''Geothermal Geophysical Research in Electrical Methods at UURI'' by Philip E. Wannamaker; ''Optimizing Reinjection Strategy at Palinpinon, Philippines Based on Chloride Data'' by Roland N. Horne; ''TETRAD Reservoir Simulation'' by G. Michael Shook

  17. Geothermal reservoir engineering

    CERN Document Server

    Grant, Malcolm Alister

    2011-01-01

    As nations alike struggle to diversify and secure their power portfolios, geothermal energy, the essentially limitless heat emanating from the earth itself, is being harnessed at an unprecedented rate.  For the last 25 years, engineers around the world tasked with taming this raw power have used Geothermal Reservoir Engineering as both a training manual and a professional reference.  This long-awaited second edition of Geothermal Reservoir Engineering is a practical guide to the issues and tasks geothermal engineers encounter in the course of their daily jobs. The bo

  18. SILTATION IN RESERVOIRS

    African Journals Online (AJOL)

    human resources. It is also intended to make known to the general public that ... port processes were not properly taken into account. ... Studies carried out on 19 reservoirs in Cen- tral Europe with storage capacity ranging be- tween 1.48 x ...

  19. Reservoir geochemistry: A link between reservoir geology and engineering?

    Energy Technology Data Exchange (ETDEWEB)

    Larter, S.R.; Aplin, A.C. [Univ. of Newcastle upon Tyne (United Kingdom); Corbett, P.; Ementon, N. [Heriot-Watt Univ., Edinburgh (United Kingdom)

    1994-12-31

    Geochemistry provides a natural but poorly exploited link between reservoir geology and engineering. The authors summarize some current applications of geochemistry to reservoir description and stress that because of their strong interactions with mineral surfaces and water, nitrogen and oxygen compounds in petroleum may exert an important influence on the PVT properties of petroleum, viscosity and wettability. The distribution of these compounds in reservoirs is heterogeneous on a sub-meter scale and is partly controlled by variations in reservoir quality. The implied variations in petroleum properties and wettability may account for some of the errors in reservoir simulations.

  20. Reservoir geochemistry: A link between reservoir geology and engineering?

    Energy Technology Data Exchange (ETDEWEB)

    Larter, S.R.; Aplin, A.C.; Chen, M.; Taylor, P.N. [Univ. of Newcastle (Australia); Corbett, P.W.M.; Ementon, N. [Heriot-Watt Univ., Edinburgh (United Kingdom)

    1997-02-01

    Geochemistry provides a natural, but poorly exploited, link between reservoir geology and engineering. The authors summarize some current applications of geochemistry to reservoir description and stress that, because of their strong interactions with mineral surfaces and water, nitrogen and oxygen compounds in petroleum may exert an important influence on the pressure/volume/temperature (PVT) properties of petroleum, viscosity and wettability. The distribution of these compounds in reservoirs is heterogeneous on a submeter scale and is partly controlled by variations in reservoir quality. The implied variations in petroleum properties and wettability may account for some of the errors in reservoir simulations.

  1. Status of Blue Ridge Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    This is one in a series of reports prepared by the Tennessee Valley Authority (TVA) for those interested in the conditions of TVA reservoirs. This overview of Blue Ridge Reservoir summarizes reservoir and watershed characteristics, reservoir uses and use impairments, water quality and aquatic biological conditions, and activities of reservoir management agencies. This information was extracted from the most current reports and data available, as well as interview with water resource professionals in various federal, state, and local agencies. Blue Ridge Reservoir is a single-purpose hydropower generating project. When consistent with this primary objective, the reservoir is also operated to benefit secondary objectives including water quality, recreation, fish and aquatic habitat, development of shoreline, aesthetic quality, and other public and private uses that support overall regional economic growth and development. 8 refs., 1 fig.

  2. Reservoir geomechanics: new approach to reservoir engineering analysis

    Energy Technology Data Exchange (ETDEWEB)

    Settari, A.; Walters, D.A.; Behie, G.A. [Duke Engineering and Services Inc., Calgary, AB (Canada)

    1999-07-01

    The rock mechanics aspects of reservoir behavior are reviewed, and a description is included of some recent trends in coupled reservoir and strata mechanics modelling. Case histories are summarized which are field applications of these new trends and tools. These case histories include: (1) high rate injection into an oil sand reservoir; (2) compaction modelling of a North Sea reservoir; and (3) brine disposal at a fracturing pressure. Coupled geomechanical modelling is feasible on a full field scale, and it provides flexibility in the degree of coupling and calculational efficiency. The scope of interest in data gathering and characterization must be extended beyond reservoir boundaries because of the coupled modelling approach. This modelling provides results that can be employed in integrated reservoir management that includes reservoir engineering, drilling and completions. Considering the three case histories, coupled modelling can be used for predicting fracture initiation and re-orientation, reservoir compaction and deformations, and enhancement of injectivity due to stress dependent formation properties. Coupled modelling has brought reservoir modelling to a new realistic level and produces significant economic gains. 15 refs., 8 figs.

  3. Geothermal reservoir management

    Energy Technology Data Exchange (ETDEWEB)

    Scherer, C.R.; Golabi, K.

    1978-02-01

    The optimal management of a hot water geothermal reservoir was considered. The physical system investigated includes a three-dimensional aquifer from which hot water is pumped and circulated through a heat exchanger. Heat removed from the geothermal fluid is transferred to a building complex or other facility for space heating. After passing through the heat exchanger, the (now cooled) geothermal fluid is reinjected into the aquifer. This cools the reservoir at a rate predicted by an expression relating pumping rate, time, and production hole temperature. The economic model proposed in the study maximizes discounted value of energy transferred across the heat exchanger minus the discounted cost of wells, equipment, and pumping energy. The real value of energy is assumed to increase at r percent per year. A major decision variable is the production or pumping rate (which is constant over the project life). Other decision variables in this optimization are production timing, reinjection temperature, and the economic life of the reservoir at the selected pumping rate. Results show that waiting time to production and production life increases as r increases and decreases as the discount rate increases. Production rate decreases as r increases and increases as the discount rate increases. The optimal injection temperature is very close to the temperature of the steam produced on the other side of the heat exchanger, and is virtually independent of r and the discount rate. Sensitivity of the decision variables to geohydrological parameters was also investigated. Initial aquifer temperature and permeability have a major influence on these variables, although aquifer porosity is of less importance. A penalty was considered for production delay after the lease is granted.

  4. Encapsulated microsensors for reservoir interrogation

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Eddie Elmer; Aines, Roger D.; Spadaccini, Christopher M.

    2016-03-08

    In one general embodiment, a system includes at least one microsensor configured to detect one or more conditions of a fluidic medium of a reservoir; and a receptacle, wherein the receptacle encapsulates the at least one microsensor. In another general embodiment, a method include injecting the encapsulated at least one microsensor as recited above into a fluidic medium of a reservoir; and detecting one or more conditions of the fluidic medium of the reservoir.

  5. Reservoir management cost-cutting

    Energy Technology Data Exchange (ETDEWEB)

    Gulati, M.S.

    1996-12-31

    This article by Mohinder S. Gulati, Chief Engineer, Unocal Geothermal Operations, discusses cost cutting in geothermal reservoir management. The reservoir engineer or geoscientist can make a big difference in the economical outcome of a project by improving well performance and thus making geothermal energy more competitive in the energy marketplace. Bringing plants online in less time and proving resources to reduce the cycle time are some of the ways to reduce reservoir management costs discussed in this article.

  6. Encapsulated microsensors for reservoir interrogation

    Science.gov (United States)

    Scott, Eddie Elmer; Aines, Roger D.; Spadaccini, Christopher M.

    2016-03-08

    In one general embodiment, a system includes at least one microsensor configured to detect one or more conditions of a fluidic medium of a reservoir; and a receptacle, wherein the receptacle encapsulates the at least one microsensor. In another general embodiment, a method include injecting the encapsulated at least one microsensor as recited above into a fluidic medium of a reservoir; and detecting one or more conditions of the fluidic medium of the reservoir.

  7. Reservoir Operation to Minimize Sedimentation

    Directory of Open Access Journals (Sweden)

    Dyah Ari Wulandari

    2013-10-01

    Full Text Available The Wonogiri Reservoir capacity decreases rapidly, caused by serious sedimentation problems. In 2007, JICA was proposed a sediment storage reservoir with a new spillway for the purpose of sediment flushing / sluicing from The Keduang River. Due to the change of reservoir storage and change of reservoir system, it requires a sustainable reservoir operation technique. This technique is aimed to minimize the deviation between the input and output of sediments. The main objective of this study is to explore the optimal Wonogiri reservoir operation by minimizing the sediment trap. The CSUDP incremental dynamic programming procedure is used for the model optimization.  This new operating rules will also simulate a five years operation period, to show the effect of the implemented techniques. The result of the study are the newly developed reservoir operation system has many advantages when compared to the actual operation system and the disadvantage of this developed system is that the use is mainly designed for a wet hydrologic year, since its performance for the water supply is lower than the actual reservoir operations.Doi: 10.12777/ijse.6.1.16-23 [How to cite this article:  Wulandari, D.A., Legono, D., and Darsono, S., 2014. Reservoir Operation to Minimize Sedimentation. International Journal of Science and Engineering, 5(2,61-65. Doi: 10.12777/ijse.6.1.16-23] Normal 0 false false false EN-US X-NONE X-NONE

  8. All-optical reservoir computing.

    Science.gov (United States)

    Duport, François; Schneider, Bendix; Smerieri, Anteo; Haelterman, Marc; Massar, Serge

    2012-09-24

    Reservoir Computing is a novel computing paradigm that uses a nonlinear recurrent dynamical system to carry out information processing. Recent electronic and optoelectronic Reservoir Computers based on an architecture with a single nonlinear node and a delay loop have shown performance on standardized tasks comparable to state-of-the-art digital implementations. Here we report an all-optical implementation of a Reservoir Computer, made of off-the-shelf components for optical telecommunications. It uses the saturation of a semiconductor optical amplifier as nonlinearity. The present work shows that, within the Reservoir Computing paradigm, all-optical computing with state-of-the-art performance is possible.

  9. Reservoir geochemistry; Geoquimica de reservatorios

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Joelma Pimentel; Rangel, Mario Duncan; Morais, Erica Tavares de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)], Emails: joelma.lopes@petrobras.com.br, mduncan@petrobras.com.br, ericat@petrobras.com.br; Aguiar, Helen G.M. de [Fundacao GORCEIX, Ouro Preto, MG (Brazil)], E-mail: helenaguiar.GORCEIX@petrobras.com.br

    2008-03-15

    Reservoir Geochemistry has many important practical applications during petroleum exploration, appraisal and development of oil fields. The most important uses are related to providing or disproving connectivity between reservoirs of a particular well or horizon. During exploration, reservoir geochemistry can indicate the direction of oil filling, suggesting the most appropriate places for drilling new wells. During production, studies of variations in composition with time and determination of proportions of commingled production from multiple zones, may also be carried out. The chemical constituents of petroleum in natural reservoirs frequently show measurable compositional variations, laterally and vertically. Due to the physical and chemical nature of petroleum changes with increasing maturity (or contribution of a second source during the filling process), lateral and vertical compositional variations exist in petroleum columns as reservoir filling is complete. Compositional variation can also be introduced by biodegradation or water washing. Once the reservoir is filled, density driven mixing and molecular diffusion tend to eliminate inherited compositional variations in an attempt to establish mechanical and chemical equilibrium in the petroleum column (England, 1990). Based on organic geochemical analysis it is possible to define these compositional variations among reservoirs, and use these data for developing of petroleum fields and for reservoir appraisal. Reservoir geochemistry offers rapid and low cost evaluation tools to aid in understanding development and production problems. Moreover, the applied methodology is relatively simple and gives reliable results, and can be performed routinely in any good geochemical laboratory at a relatively low cost. (author)

  10. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  11. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on mathematic

  12. An improved reservoir oxide cathode

    Science.gov (United States)

    Wang, Xiaoxia; Liao, Xianheng; Luo, Jirun; Zhao, Qinglan

    2005-09-01

    A new type of reservoir oxide cathode has been developed in IECAS. The emission characteristics of the cathode are tested. The results show the new cathode has higher emission current density and better resistance to poisoning at same operating condition compared with those of conventional reservoir oxide cathode.

  13. Reservoir sedimentation; a literature survey

    NARCIS (Netherlands)

    Sloff, C.J.

    1991-01-01

    A survey of literature is made on reservoir sedimentation, one of the most threatening processes for world-wide reservoir performance. The sedimentation processes, their impacts, and their controlling factors are assessed from a hydraulic engineering point of view with special emphasis on

  14. FRACTURED PETROLEUM RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Abbas Firoozabadi

    1999-06-11

    The four chapters that are described in this report cover a variety of subjects that not only give insight into the understanding of multiphase flow in fractured porous media, but they provide also major contribution towards the understanding of flow processes with in-situ phase formation. In the following, a summary of all the chapters will be provided. Chapter I addresses issues related to water injection in water-wet fractured porous media. There are two parts in this chapter. Part I covers extensive set of measurements for water injection in water-wet fractured porous media. Both single matrix block and multiple matrix blocks tests are covered. There are two major findings from these experiments: (1) co-current imbibition can be more efficient than counter-current imbibition due to lower residual oil saturation and higher oil mobility, and (2) tight fractured porous media can be more efficient than a permeable porous media when subjected to water injection. These findings are directly related to the type of tests one can perform in the laboratory and to decide on the fate of water injection in fractured reservoirs. Part II of Chapter I presents modeling of water injection in water-wet fractured media by modifying the Buckley-Leverett Theory. A major element of the new model is the multiplication of the transfer flux by the fractured saturation with a power of 1/2. This simple model can account for both co-current and counter-current imbibition and computationally it is very efficient. It can be orders of magnitude faster than a conventional dual-porosity model. Part II also presents the results of water injection tests in very tight rocks of some 0.01 md permeability. Oil recovery from water imbibition tests from such at tight rock can be as high as 25 percent. Chapter II discusses solution gas-drive for cold production from heavy-oil reservoirs. The impetus for this work is the study of new gas phase formation from in-situ process which can be significantly

  15. Chalk as a reservoir

    DEFF Research Database (Denmark)

    Fabricius, Ida Lykke

    , and the best reservoir properties are typically found in mudstone intervals. Chalk mudstones vary a lot though. The best mudstones are purely calcitic, well sorted and may have been redeposited by traction currents. Other mudstones are rich in very fine grained silica, which takes up pore space and thus...... stabilizes chemically by recrystallization. This process requires energy and is promoted by temperature. This recrystallization in principle does not influence porosity, but only specific surface, which decreases during recrystallization, causing permeability to increase. The central North Sea is a warm...... intervals are to some extent cemented and cannot compact mechanically at realistic effective stresses and only deform elastically. All chalk intervals though, may react by fracturing to changes in shear stress. So where natural fractures are not prevalent, fractures may be generated hydraulically. Fractures...

  16. Reasons for reservoir effect variability

    DEFF Research Database (Denmark)

    Philippsen, Bente

    2013-01-01

    Freshwater reservoir effects can be large and highly variable. I will present my investigations into the short-term variability of the freshwater reservoir effect in two Northern German rivers. The samples analysed in this study were collected between 2007 and 2012. Reservoir ages of water samples......, aquatic plants and fish from the rivers Alster and Trave range between zero and about 3,000 radiocarbon years. The reservoir age of water DIC depends to a large extent on the origin of the water and is for example correlated with precipitation amounts. These short-term variations are smoothed out in water...... plants. Their carbon should represent an average value of the entire growth season. However, there are large reservoir age variations in aquatic plants and animals as well. These can best be explained by the multitude of carbon sources which can be utilized by aquatic organisms, and which have...

  17. Gravity observations for hydrocarbon reservoir monitoring

    NARCIS (Netherlands)

    Glegola, M.A.

    2013-01-01

    In this thesis the added value of gravity observations for hydrocarbon reservoir monitoring and characterization is investigated. Reservoir processes and reservoir types most suitable for gravimetric monitoring are identified. Major noise sources affecting time-lapse gravimetry are analyzed. The

  18. Water resources review: Ocoee reservoirs, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Cox, J.P.

    1990-08-01

    Tennessee Valley Authority (TVA) is preparing a series of reports to make technical information on individual TVA reservoirs readily accessible. These reports provide a summary of reservoir purpose and operation; physical characteristics of the reservoir and watershed; water quality conditions; aquatic biological conditions; and designated, actual and potential uses of the reservoir and impairments of those use. This reservoir status report addressed the three Ocoee Reservoirs in Polk County, Tennessee.

  19. Analysis of real-time reservoir monitoring : reservoirs, strategies, & modeling.

    Energy Technology Data Exchange (ETDEWEB)

    Mani, Seethambal S.; van Bloemen Waanders, Bart Gustaaf; Cooper, Scott Patrick; Jakaboski, Blake Elaine; Normann, Randy Allen; Jennings, Jim (University of Texas at Austin, Austin, TX); Gilbert, Bob (University of Texas at Austin, Austin, TX); Lake, Larry W. (University of Texas at Austin, Austin, TX); Weiss, Chester Joseph; Lorenz, John Clay; Elbring, Gregory Jay; Wheeler, Mary Fanett (University of Texas at Austin, Austin, TX); Thomas, Sunil G. (University of Texas at Austin, Austin, TX); Rightley, Michael J.; Rodriguez, Adolfo (University of Texas at Austin, Austin, TX); Klie, Hector (University of Texas at Austin, Austin, TX); Banchs, Rafael (University of Texas at Austin, Austin, TX); Nunez, Emilio J. (University of Texas at Austin, Austin, TX); Jablonowski, Chris (University of Texas at Austin, Austin, TX)

    2006-11-01

    The project objective was to detail better ways to assess and exploit intelligent oil and gas field information through improved modeling, sensor technology, and process control to increase ultimate recovery of domestic hydrocarbons. To meet this objective we investigated the use of permanent downhole sensors systems (Smart Wells) whose data is fed real-time into computational reservoir models that are integrated with optimized production control systems. The project utilized a three-pronged approach (1) a value of information analysis to address the economic advantages, (2) reservoir simulation modeling and control optimization to prove the capability, and (3) evaluation of new generation sensor packaging to survive the borehole environment for long periods of time. The Value of Information (VOI) decision tree method was developed and used to assess the economic advantage of using the proposed technology; the VOI demonstrated the increased subsurface resolution through additional sensor data. Our findings show that the VOI studies are a practical means of ascertaining the value associated with a technology, in this case application of sensors to production. The procedure acknowledges the uncertainty in predictions but nevertheless assigns monetary value to the predictions. The best aspect of the procedure is that it builds consensus within interdisciplinary teams The reservoir simulation and modeling aspect of the project was developed to show the capability of exploiting sensor information both for reservoir characterization and to optimize control of the production system. Our findings indicate history matching is improved as more information is added to the objective function, clearly indicating that sensor information can help in reducing the uncertainty associated with reservoir characterization. Additional findings and approaches used are described in detail within the report. The next generation sensors aspect of the project evaluated sensors and packaging

  20. Data requirements and acquisition for reservoir characterization

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, S.; Chang, Ming Ming; Tham, Min.

    1993-03-01

    This report outlines the types of data, data sources and measurement tools required for effective reservoir characterization, the data required for specific enhanced oil recovery (EOR) processes, and a discussion on the determination of the optimum data density for reservoir characterization and reservoir modeling. The two basic sources of data for reservoir characterization are data from the specific reservoir and data from analog reservoirs, outcrops, and modern environments. Reservoir data can be divided into three broad categories: (1) rock properties (the container) and (2) fluid properties (the contents) and (3)interaction between reservoir rock and fluid. Both static and dynamic measurements are required.

  1. A reservoir simulation approach for modeling of naturally fractured reservoirs

    Directory of Open Access Journals (Sweden)

    H. Mohammadi

    2012-12-01

    Full Text Available In this investigation, the Warren and Root model proposed for the simulation of naturally fractured reservoir was improved. A reservoir simulation approach was used to develop a 2D model of a synthetic oil reservoir. Main rock properties of each gridblock were defined for two different types of gridblocks called matrix and fracture gridblocks. These two gridblocks were different in porosity and permeability values which were higher for fracture gridblocks compared to the matrix gridblocks. This model was solved using the implicit finite difference method. Results showed an improvement in the Warren and Root model especially in region 2 of the semilog plot of pressure drop versus time, which indicated a linear transition zone with no inflection point as predicted by other investigators. Effects of fracture spacing, fracture permeability, fracture porosity, matrix permeability and matrix porosity on the behavior of a typical naturally fractured reservoir were also presented.

  2. THE SURDUC RESERVOIR (ROMANIA

    Directory of Open Access Journals (Sweden)

    Niculae Iulian TEODORESCU

    2008-06-01

    Full Text Available The Surduc reservoir was projected to ensure more water when water is scarce and to thus provide especially the city Timisoara, downstream of it with water.The accumulation is placed on the main affluent of the Bega river, Gladna in the upper part of its watercourse.The dam behind which this accumulation was created is of a frontal type made of enrochements with a masque made of armed concrete on the upstream part and protected/sustained by grass on the downstream. The dam is 130m long on its coping and a constructed height of 34 m. It is also endowed with spillway for high water and two bottom outlets formed of two conduits, at the end of which is the microplant. The second part of my paper deals with the hydrometric analysis of the Accumulation Surduc and its impact upon the flow, especially the maximum run-off. This influence is exemplified through the high flood from the 29th of July 1980, the most significant flood recorded in the basin with an apparition probability of 0.002%.

  3. 2010 Fresno Reservoir Sedimentation Survey

    Data.gov (United States)

    US Bureau of Reclamation, Department of the Interior — The Bureau of Reclamation (Reclamation) surveyed Fresno Reservoir in June of 2010 to develop a topographic map and compute a storage-elevation relationship...

  4. 2011 Groundhog Reservoir Bathymetric Contours

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey performed a bathymetric survey of Groundhog Reservoir using a man-operated boat-mounted multibeam echo sounder integrated with a global...

  5. Glendo Reservoir 2003 Sedimenation Survey

    Data.gov (United States)

    US Bureau of Reclamation, Department of the Interior — The Bureau of Reclamation (Reclamation) surveyed Glendo Reservoir in May and July of 2003 and January 2005 to develop a new topographic map and compute a present...

  6. Understanding the True Strimulated Reservoir Volume in Shale Reservoirs

    KAUST Repository

    Hussain, Maaruf

    2017-06-06

    Successful exploitation of shale reservoirs largely depends on the effectiveness of hydraulic fracturing stimulation program. Favorable results have been attributed to intersection and reactivation of pre-existing fractures by hydraulically-induced fractures that connect the wellbore to a larger fracture surface area within the reservoir rock volume. Thus, accurate estimation of the stimulated reservoir volume (SRV) becomes critical for the reservoir performance simulation and production analysis. Micro-seismic events (MS) have been commonly used as a proxy to map out the SRV geometry, which could be erroneous because not all MS events are related to hydraulic fracture propagation. The case studies discussed here utilized a fully 3-D simulation approach to estimate the SRV. The simulation approach presented in this paper takes into account the real-time changes in the reservoir\\'s geomechanics as a function of fluid pressures. It is consisted of four separate coupled modules: geomechanics, hydrodynamics, a geomechanical joint model for interfacial resolution, and an adaptive re-meshing. Reservoir stress condition, rock mechanical properties, and injected fluid pressure dictate how fracture elements could open or slide. Critical stress intensity factor was used as a fracture criterion governing the generation of new fractures or propagation of existing fractures and their directions. Our simulations were run on a Cray XC-40 HPC system. The studies outcomes proved the approach of using MS data as a proxy for SRV to be significantly flawed. Many of the observed stimulated natural fractures are stress related and very few that are closer to the injection field are connected. The situation is worsened in a highly laminated shale reservoir as the hydraulic fracture propagation is significantly hampered. High contrast in the in-situ stresses related strike-slip developed thereby shortens the extent of SRV. However, far field nature fractures that were not connected to

  7. Chickamauga reservoir embayment study - 1990

    Energy Technology Data Exchange (ETDEWEB)

    Meinert, D.L.; Butkus, S.R.; McDonough, T.A.

    1992-12-01

    The objectives of this report are three-fold: (1) assess physical, chemical, and biological conditions in the major embayments of Chickamauga Reservoir; (2) compare water quality and biological conditions of embayments with main river locations; and (3) identify any water quality concerns in the study embayments that may warrant further investigation and/or management actions. Embayments are important areas of reservoirs to be considered when assessments are made to support water quality management plans. In general, embayments, because of their smaller size (water surface areas usually less than 1000 acres), shallower morphometry (average depth usually less than 10 feet), and longer detention times (frequently a month or more), exhibit more extreme responses to pollutant loadings and changes in land use than the main river region of the reservoir. Consequently, embayments are often at greater risk of water quality impairments (e.g. nutrient enrichment, filling and siltation, excessive growths of aquatic plants, algal blooms, low dissolved oxygen concentrations, bacteriological contamination, etc.). Much of the secondary beneficial use of reservoirs occurs in embayments (viz. marinas, recreation areas, parks and beaches, residential development, etc.). Typically embayments comprise less than 20 percent of the surface area of a reservoir, but they often receive 50 percent or more of the water-oriented recreational use of the reservoir. This intensive recreational use creates a potential for adverse use impacts if poor water quality and aquatic conditions exist in an embayment.

  8. Capacity sharing of water reservoirs

    Science.gov (United States)

    Dudley, Norman J.; Musgrave, Warren F.

    1988-05-01

    The concept of a water use property right is developed which does not apply to water volumes as such but to a share of the capacity (not contents) of river storage reservoirs and their inflows. The shareholders can withdraw water from their share over time in accordance with their preferences for stability of water deliveries. The reservoir authority does not manage reservoir releases but keeps record of individual shareholder's withdrawals and net inflows to monitor the quantity of water in each shareholder's capacity share. A surplus of total reservoir contents over the sum of the contents of the individual shareholder's capacity shares will accrue over time. Two different criteria for its periodic distribution among shareholders are compared. A previous paper Dudley (this issue(b)) noted a loss of short-run economic efficiency as reservoir and farm management decision making become separated. This is largely overcome by capacity sharing which allows each user to integrate the management of their portion of the reservoir and their farming operations. The nonattenuated nature of the capacity sharing water rights also promotes long-run economic efficiency.

  9. Reservoir characterization of Pennsylvanian Sandstone Reservoirs. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kelkar, M.

    1992-09-01

    This annual report describes the progress during the second year of a project on Reservoir Characterization of Pennsylvanian Sandstone Reservoirs. The report is divided into three sections: (i) reservoir description and scale-up procedures; (ii) outcrop investigation; (iii) in-fill drilling potential. The first section describes the methods by which a reservoir can be characterized, can be described in three dimensions, and can be scaled up with respect to its properties, appropriate for simulation purposes. The second section describes the progress on investigation of an outcrop. The outcrop is an analog of Bartlesville Sandstone. We have drilled ten wells behind the outcrop and collected extensive log and core data. The cores have been slabbed, photographed and the several plugs have been taken. In addition, minipermeameter is used to measure permeabilities on the core surface at six inch intervals. The plugs have been analyzed for the permeability and porosity values. The variations in property values will be tied to the geological descriptions as well as the subsurface data collected from the Glen Pool field. The third section discusses the application of geostatistical techniques to infer in-fill well locations. The geostatistical technique used is the simulated annealing technique because of its flexibility. One of the important reservoir data is the production data. Use of production data will allow us to define the reservoir continuities, which may in turn, determine the in-fill well locations. The proposed technique allows us to incorporate some of the production data as constraints in the reservoir descriptions. The technique has been validated by comparing the results with numerical simulations.

  10. Petroleum reservoir data for testing simulation models

    Energy Technology Data Exchange (ETDEWEB)

    Lloyd, J.M.; Harrison, W.

    1980-09-01

    This report consists of reservoir pressure and production data for 25 petroleum reservoirs. Included are 5 data sets for single-phase (liquid) reservoirs, 1 data set for a single-phase (liquid) reservoir with pressure maintenance, 13 data sets for two-phase (liquid/gas) reservoirs and 6 for two-phase reservoirs with pressure maintenance. Also given are ancillary data for each reservoir that could be of value in the development and validation of simulation models. A bibliography is included that lists the publications from which the data were obtained.

  11. basement reservoir geometry and properties

    Science.gov (United States)

    Walter, bastien; Geraud, yves; Diraison, marc

    2017-04-01

    Basement reservoirs are nowadays frequently investigated for deep-seated fluid resources (e.g. geothermal energy, groundwater, hydrocarbons). The term 'basement' generally refers to crystalline and metamorphic formations, where matrix porosity is negligible in fresh basement rocks. Geothermal production of such unconventional reservoirs is controlled by brittle structures and altered rock matrix, resulting of a combination of different tectonic, hydrothermal or weathering phenomena. This work aims to characterize the petro-structural and petrophysical properties of two basement surface analogue case studies in geological extensive setting (the Albert Lake rift in Uganda; the Ifni proximal margin of the South West Morocco Atlantic coast). Different datasets, using field structural study, geophysical acquisition and laboratory petrophysical measurements, were integrated to describe the multi-scale geometry of the porous network of such fractured and weathered basement formations. This study points out the multi-scale distribution of all the features constituting the reservoir, over ten orders of magnitude from the pluri-kilometric scale of the major tectonics structures to the infra-millimetric scale of the secondary micro-porosity of fractured and weathered basements units. Major fault zones, with relatively thick and impermeable fault core structures, control the 'compartmentalization' of the reservoir by dividing it into several structural blocks. The analysis of these fault zones highlights the necessity for the basement reservoirs to be characterized by a highly connected fault and fracture system, where structure intersections represent the main fluid drainage areas between and within the reservoir's structural blocks. The suitable fluid storage areas in these reservoirs correspond to the damage zone of all the fault structures developed during the tectonic evolution of the basement and the weathered units of the basement roof developed during pre

  12. Application of Integrated Reservoir management and Reservoir Characterization to Optimize Infill Drilling

    Energy Technology Data Exchange (ETDEWEB)

    B. Pregger; D. Davies; D. Moore; G. Freeman; J. Callard; J.W. Nevans; L. Doublet; R. Vessell; T. Blasingame

    1997-08-31

    Infill drilling if wells on a uniform spacing without regard to reservoir performance and characterization foes not optimize reservoir development because it fails to account for the complex nature of reservoir heterogeneities present in many low permeability reservoirs, and carbonate reservoirs in particular. New and emerging technologies, such as geostatistical modeling, rigorous decline curve analysis, reservoir rock typing, and special core analysis can be used to develop a 3-D simulation model for prediction of infill locations.

  13. Reservoir Protection Technology in China: Research & Application

    Institute of Scientific and Technical Information of China (English)

    Li Qiangui; Wu Juan; Kang Yili

    2006-01-01

    @@ Great development of reservoir protection technology (RPT) has been achieved since 1996, including oil and gas reservoir protection for exploration wells, reservoir protection during underbalanced drilling, protection of fractured tight sandstone gas reservoir, and reservoir protection while increase production and reconstructing, development and enhanced oil recovery (EOR) etc. It has stepped into a new situation with special features and advantage. These technical advancements marked that China's RTP have realized leaps from porous reservoirs to fractured reservoirs,from conventional medium-to-low permeability reservoirs to unconventional reservoirs, from oil and gas producers to exploration wells, and from application mainly in drilling and completion processes to application in stimulation,development, production and EOR processes.

  14. Multilevel techniques for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour

    The subject of this thesis is the development, application and study of novel multilevel methods for the acceleration and improvement of reservoir simulation techniques. The motivation for addressing this topic is a need for more accurate predictions of porous media flow and the ability to carry...... Full Approximation Scheme) • Variational (Galerkin) upscaling • Linear solvers and preconditioners First, a nonlinear multigrid scheme in the form of the Full Approximation Scheme (FAS) is implemented and studied for a 3D three-phase compressible rock/fluids immiscible reservoir simulator...... based on element-based Algebraic Multigrid (AMGe). In particular, an advanced AMGe technique with guaranteed approximation properties is used to construct a coarse multilevel hierarchy of Raviart-Thomas and L2 spaces for the Galerkin coarsening of a mixed formulation of the reservoir simulation...

  15. Amplitude various angles (AVA) phenomena in thin layer reservoir: Case study of various reservoirs

    Science.gov (United States)

    Nurhandoko, Bagus Endar B.; Susilowati

    2015-04-01

    Amplitude various offset is widely used in petroleum exploration as well as in petroleum development field. Generally, phenomenon of amplitude in various angles assumes reservoir's layer is quite thick. It also means that the wave is assumed as a very high frequency. But, in natural condition, the seismic wave is band limited and has quite low frequency. Therefore, topic about amplitude various angles in thin layer reservoir as well as low frequency assumption is important to be considered. Thin layer reservoir means the thickness of reservoir is about or less than quarter of wavelength. In this paper, I studied about the reflection phenomena in elastic wave which considering interference from thin layer reservoir and transmission wave. I applied Zoeppritz equation for modeling reflected wave of top reservoir, reflected wave of bottom reservoir, and also transmission elastic wave of reservoir. Results show that the phenomena of AVA in thin layer reservoir are frequency dependent. Thin layer reservoir causes interference between reflected wave of top reservoir and reflected wave of bottom reservoir. These phenomena are frequently neglected, however, in real practices. Even though, the impact of inattention in interference phenomena caused by thin layer in AVA may cause inaccurate reservoir characterization. The relation between classes of AVA reservoir and reservoir's character are different when effect of ones in thin reservoir and ones in thick reservoir are compared. In this paper, I present some AVA phenomena including its cross plot in various thin reservoir types based on some rock physics data of Indonesia.

  16. Smart Waterflooding in Carbonate Reservoirs

    DEFF Research Database (Denmark)

    Zahid, Adeel

    During the last decade, smart waterflooding has been developed into an emerging EOR technology both for carbonate and sandstone reservoirs that does not require toxic or expensive chemicals. Although it is widely accepted that different salinity brines may increase the oil recovery for carbonate...... reservoirs, understanding of the mechanism of this increase is still developing. To understand this smart waterflooding process, an extensive research has been carried out covering a broad range of disciplines within surface chemistry, thermodynamics of crude oil and brine, as well as their behavior...

  17. SIRIU RESERVOIR, BUZAU RIVER (ROMANIA

    Directory of Open Access Journals (Sweden)

    Daniel Constantin DIACONU

    2008-06-01

    Full Text Available Siriu reservoir, owes it`s creation to the dam built on the river Buzau, in the town which bears the same name. The reservoir has a hydro energetic role, to diminish the maximum flow and to provide water to the localities below. The partial exploitation of the lake, began in 1984; Since that time, the initial bed of the river began to accumulate large quantities of alluvia, reducing the retention capacity of the lake, which had a volume of 125 million m3. The changes produced are determined by many topographic surveys at the bottom of the lake.

  18. Geothermal reservoir engineering. Part 1. Reservoir assessment; Chinetsu choryuso kogaku. 1. Choryuso hyoka

    Energy Technology Data Exchange (ETDEWEB)

    Ishido, T. [Geological Survey of Japan, Tsukuba, Ibaraki (Japan)

    1997-03-15

    This paper is the introduction entitled `Reservoir Assessment` of a lecture on geothermal reservoir engineering. Geothermal resources are described first. The amount of heat released from the inner part of the earth to the surface is 4.2 billion watts. The present technology is able to develop up to 2 to 3 km from the surface. In the section of Geothermal Reservoirs, the concept models of geothermal systems are explained. The development of geothermal reservoirs is essentially to collect heat from the reservoirs. Basically, 2 processes are considered, viz. Cold Sweep and In Situ Boiling. The technical field that is closely related to the reservoir assessment is the geothermal reservoir engineering and this was born in 1970`s. The reservoir modeling is dealt with dividing into 3 headings, viz. Mathematical model and reservoir simulator, Making reservoir model and History of reservoir model at Wairakei. The production forecast and the post-production behavior are also described. 12 refs., 15 figs., 2 tabs.

  19. Unconventional Reservoirs: Ideas to Commercialization

    Science.gov (United States)

    Tinker, S. W.

    2015-12-01

    There is no shortage of coal, oil, and natural gas in the world. What are sometimes in short supply are fresh ideas. Scientific innovation combined with continued advances in drilling and completion technology revitalized the natural gas industry in North America by making production from shale economic. Similar advances are now happening in shale oil. The convergence of ideas and technology has created a commercial environment in which unconventional reservoirs could supply natural gas to the North American consumer for 50 years or more. And, although not as far along in terms of resource development, oil from the Eagle Ford and Bakken Shales and the oil sands in Alberta could have a similar impact. Without advanced horizontal drilling, geosteering, staged hydraulic-fracture stimulation, synthetic and natural proppants, evolution of hydraulic fluid chemistry, and high-end monitoring and simulation, many of these plays would not exist. Yet drilling and completion technology cannot stand alone. Also required for success are creative thinking, favorable economics, and a tolerance for risk by operators. Current understanding and completion practices will leave upwards of 80% of oil and natural gas in the shale reservoirs. The opportunity to enhance recovery through advanced reservoir understanding and imaging, as well as through recompletions and infill drilling, is considerable. The path from ideas to commercialization will continue to provide economic results in unconventional reservoirs.

  20. Prevention of Reservoir Interior Discoloration

    Energy Technology Data Exchange (ETDEWEB)

    Arnold, K.F.

    2001-04-03

    Contamination is anathema in reservoir production. Some of the contamination is a result of welding and some appears after welding but existed before. Oxygen was documented to be a major contributor to discoloration in welding. This study demonstrates that it can be controlled and that some of the informal cleaning processes contribute to contamination.

  1. Indiana continent catheterizable urinary reservoir.

    Science.gov (United States)

    Castillo, O A; Aranguren, G; Campos-Juanatey, F

    2014-01-01

    Radical pelvic surgery requires continent or incontinent urinary diversion. There are many techniques, but the orthotopic neobladder is the most used. A continent catheterizable urinary reservoir is sometimes a good alternative when this derivation is not possible or not indicated. This paper has aimed to present our experience with the Indiana pouch continent urinary reservoir. The series is made up of 85 patients, 66 women and 19 men, with a mean age of 56 years (31-77 years). Variables analyzed were operating time, estimated blood loss, transfusion rate, hospital stay and peri-operatory complications. The main indication in 49 cases was resolution of complications related to the treatment of cervical cancer. Average operation time was 110.5 minutes (range 80-130 minutes). Mean blood loss was 450 cc (100-1000 cc). Immediate postoperative complications, all of which were treated medically, occurred in 16 patients (18.85%). One patient suffered anastomotic leakage. Hospital stay was 19 days (range 5-60 days) and there was no mortality in the series. Late complications occurred in 26 patients (32%), these being ureteral anastomotic stenosis in 11 cases, cutaneous stoma stenosis in 9 cases and reservoir stones in 6 cases. The Indiana continent catheterizable urinary reservoir is a valid option for the treatment of both urological and gynecological malignancies as well as for the management of pelvic morbidity related to the treatment of pelvic cancers. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

  2. Data assimilation in reservoir management

    NARCIS (Netherlands)

    Rommelse, J.R.

    2009-01-01

    The research presented in this thesis aims at improving computer models that allow simulations of water, oil and gas flows in subsurface petroleum reservoirs. This is done by integrating, or assimilating, measurements into physics-bases models. In recent years petroleum technology has developed

  3. Reservoir Cathode for Electric Space Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a reservoir cathode to improve performance in both ion and Hall-effect thrusters. We propose to adapt our existing reservoir cathode technology to this...

  4. Reservoir Cathode for Electric Space Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose a hollow reservoir cathode to improve performance in ion and Hall thrusters. We will adapt our existing reservoir cathode technology to this purpose....

  5. RESERVOIR CHARACTERIZATION USING SEISMIC AND WELL ...

    African Journals Online (AJOL)

    Osondu

    2012-06-19

    Jun 19, 2012 ... Key words: Reservoir sand, Well log, Water saturation, Linear and Steiber. Introduction. Reservoir ... During analysis, seismic data can quantitatively predict ..... Wireline and Testing, Houston Texas, pp. 21 –. 89. Wan Qin ...

  6. High Energy Gas Fracturing in Deep Reservoir

    Institute of Scientific and Technical Information of China (English)

    Zhang Qiangde; Zhao Wanxiang; Wang Faxuan

    1994-01-01

    @@ Introduction The HEGF technology has many merits such as low cost, simple work conditions, treating the thin reservoir without layer dividing tools, no contamination to the reservoirs and connections with more natural fractures. So it is suitable to treat thin reservoirs,water and acid senstive reservoirs and the reserviors with natural fissures and also suitable to evaluate the production test of new wells, blocking removing treatment, increasing injection treatment and the treatment for the hydrofracturing well with some productivity.

  7. Reservoir resistivity characterization incorporating flow dynamics

    KAUST Repository

    Arango, Santiago

    2016-04-07

    Systems and methods for reservoir resistivity characterization are provided, in various aspects, an integrated framework for the estimation of Archie\\'s parameters for a strongly heterogeneous reservoir utilizing the dynamics of the reservoir are provided. The framework can encompass a Bayesian estimation/inversion method for estimating the reservoir parameters, integrating production and time lapse formation conductivity data to achieve a better understanding of the subsurface rock conductivity properties and hence improve water saturation imaging.

  8. Amplitude various angles (AVA) phenomena in thin layer reservoir: Case study of various reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Nurhandoko, Bagus Endar B., E-mail: bagusnur@bdg.centrin.net.id, E-mail: bagusnur@rock-fluid.com [Wave Inversion and Subsurface Fluid Imaging Research Laboratory (WISFIR), Basic Science Center A 4" t" hfloor, Physics Dept., FMIPA, Institut Teknologi Bandung (Indonesia); Rock Fluid Imaging Lab., Bandung (Indonesia); Susilowati, E-mail: bagusnur@bdg.centrin.net.id, E-mail: bagusnur@rock-fluid.com [Rock Fluid Imaging Lab., Bandung (Indonesia)

    2015-04-16

    Amplitude various offset is widely used in petroleum exploration as well as in petroleum development field. Generally, phenomenon of amplitude in various angles assumes reservoir’s layer is quite thick. It also means that the wave is assumed as a very high frequency. But, in natural condition, the seismic wave is band limited and has quite low frequency. Therefore, topic about amplitude various angles in thin layer reservoir as well as low frequency assumption is important to be considered. Thin layer reservoir means the thickness of reservoir is about or less than quarter of wavelength. In this paper, I studied about the reflection phenomena in elastic wave which considering interference from thin layer reservoir and transmission wave. I applied Zoeppritz equation for modeling reflected wave of top reservoir, reflected wave of bottom reservoir, and also transmission elastic wave of reservoir. Results show that the phenomena of AVA in thin layer reservoir are frequency dependent. Thin layer reservoir causes interference between reflected wave of top reservoir and reflected wave of bottom reservoir. These phenomena are frequently neglected, however, in real practices. Even though, the impact of inattention in interference phenomena caused by thin layer in AVA may cause inaccurate reservoir characterization. The relation between classes of AVA reservoir and reservoir’s character are different when effect of ones in thin reservoir and ones in thick reservoir are compared. In this paper, I present some AVA phenomena including its cross plot in various thin reservoir types based on some rock physics data of Indonesia.

  9. 33 CFR 211.81 - Reservoir areas.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Reservoir areas. 211.81 Section... Lands in Reservoir Areas Under Jurisdiction of Department of the Army for Cottage Site Development and Use § 211.81 Reservoir areas. Delegations, rules and regulations in §§ 211.71 to 211.80 are...

  10. Tenth workshop on geothermal reservoir engineering: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-22

    The workshop contains presentations in the following areas: (1) reservoir engineering research; (2) field development; (3) vapor-dominated systems; (4) the Geysers thermal area; (5) well test analysis; (6) production engineering; (7) reservoir evaluation; (8) geochemistry and injection; (9) numerical simulation; and (10) reservoir physics. (ACR)

  11. Gravity observations for hydrocarbon reservoir monitoring

    NARCIS (Netherlands)

    Glegola, M.A.

    2013-01-01

    In this thesis the added value of gravity observations for hydrocarbon reservoir monitoring and characterization is investigated. Reservoir processes and reservoir types most suitable for gravimetric monitoring are identified. Major noise sources affecting time-lapse gravimetry are analyzed. The ad

  12. 4. International reservoir characterization technical conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This volume contains the Proceedings of the Fourth International Reservoir Characterization Technical Conference held March 2-4, 1997 in Houston, Texas. The theme for the conference was Advances in Reservoir Characterization for Effective Reservoir Management. On March 2, 1997, the DOE Class Workshop kicked off with tutorials by Dr. Steve Begg (BP Exploration) and Dr. Ganesh Thakur (Chevron). Tutorial presentations are not included in these Proceedings but may be available from the authors. The conference consisted of the following topics: data acquisition; reservoir modeling; scaling reservoir properties; and managing uncertainty. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.

  13. The role of reservoir characterization in the reservoir management process (as reflected in the Department of Energy`s reservoir management demonstration program)

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, M.L. [BDM-Petroleum Technologies, Bartlesville, OK (United States); Young, M.A.; Madden, M.P. [BDM-Oklahoma, Bartlesville, OK (United States)] [and others

    1997-08-01

    Optimum reservoir recovery and profitability result from guidance of reservoir practices provided by an effective reservoir management plan. Success in developing the best, most appropriate reservoir management plan requires knowledge and consideration of (1) the reservoir system including rocks, and rock-fluid interactions (i.e., a characterization of the reservoir) as well as wellbores and associated equipment and surface facilities; (2) the technologies available to describe, analyze, and exploit the reservoir; and (3) the business environment under which the plan will be developed and implemented. Reservoir characterization is the essential to gain needed knowledge of the reservoir for reservoir management plan building. Reservoir characterization efforts can be appropriately scaled by considering the reservoir management context under which the plan is being built. Reservoir management plans de-optimize with time as technology and the business environment change or as new reservoir information indicates the reservoir characterization models on which the current plan is based are inadequate. BDM-Oklahoma and the Department of Energy have implemented a program of reservoir management demonstrations to encourage operators with limited resources and experience to learn, implement, and disperse sound reservoir management techniques through cooperative research and development projects whose objectives are to develop reservoir management plans. In each of the three projects currently underway, careful attention to reservoir management context assures a reservoir characterization approach that is sufficient, but not in excess of what is necessary, to devise and implement an effective reservoir management plan.

  14. Nonlinear Multigrid for Reservoir Simulation

    DEFF Research Database (Denmark)

    Christensen, Max la Cour; Eskildsen, Klaus Langgren; Engsig-Karup, Allan Peter

    2016-01-01

    A feasibility study is presented on the effectiveness of applying nonlinear multigrid methods for efficient reservoir simulation of subsurface flow in porous media. A conventional strategy modeled after global linearization by means of Newton’s method is compared with an alternative strategy...... modeled after local linearization, leading to a nonlinear multigrid method in the form of the full-approximation scheme (FAS). It is demonstrated through numerical experiments that, without loss of robustness, the FAS method can outperform the conventional techniques in terms of algorithmic and numerical...... efficiency for a black-oil model. Furthermore, the use of the FAS method enables a significant reduction in memory usage compared with conventional techniques, which suggests new possibilities for improved large-scale reservoir simulation and numerical efficiency. Last, nonlinear multilevel preconditioning...

  15. Coalbed methane reservoir boundaries and sealing mechanism

    Institute of Scientific and Technical Information of China (English)

    SU Xianbo; LIN Xiaoying; LIU Shaobo; SONG Yan

    2005-01-01

    It is important to investigate the coalbed methane reservoir boundaries for the classification, exploration, and development of the coalbed methane reservoir.Based on the investigation of the typical coalbed methane reservoirs in the world, the boundaries can be divided into four types: hydrodynamic boundary, air altered boundary,permeability boundary, and fault boundary. Hydrodynamic and air altered boundaries are ubiquitous boundaries for every coalbed methane reservoir. The four types of the fault sealing mechanism in the petroleum geological investigation (diagen- esis, clay smear, juxtaposition and cataclasis) are applied to the fault boundary of the coalbed methane reservoir. The sealing mechanism of the open fault boundary is the same with that of the hydrodynamic sealing boundary.The sealing mechanism of the permeability boundary is firstly classified into capillary pressure sealing and hydrocarbon concentration sealing. There are different controlling boundaries in coalbed methane reservoirs that are in different geological backgrounds. Therefore, the coalbed methane reservoir is diversiform.

  16. Reservoir compartmentalization assessment by using FTIR spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Permanyer, A. [Dept. Geoquimica, Petrologia i Prospeccio Geologica, Universitat de Barcelona, Marti i Franques, s/n, 08028 - Barcelona, Catalonia (Spain); Rebufa, C.; Kister, J. [Universite d' Aix - Marseille III, Faculte des Sciences et Techniques de St. Jerome, CNRS UMR 6171, Laboratoire de Geochimie Organique Analytique et Environnement (GOAE), Case 561, 13397 Marseille Cedex 20 (France)

    2007-09-15

    Reservoir geochemistry has traditionally used the gas chromatographic fingerprinting method and star diagrams to provide evidence of petroleum reservoir compartmentalization. Recently alternative techniques such as Fourier Transform Infra Red (FTIR) spectroscopy have been postulated to aid the evaluation of reservoir compartmentalization, and to characterize the geochemical evolution of oils from individual reservoirs. FTIR spectroscopy was applied successfully in the Tarragona Basin, Offshore N.E. Spain, validating the method to identify oils from different reservoirs. Moreover the method was successfully applied to provide evidence of compositional differences in oils from a faulted reservoir (El Furrial field, Venezuela), in which GC fingerprints failed to differentiate the oils. FTIR spectroscopy therefore, proves to be a complementary tool for reservoir compartmentalization studies. (author)

  17. MIKROMITSETY- MIGRANTS IN MINGECHEVIR RESERVOIR

    Directory of Open Access Journals (Sweden)

    M. A. Salmanov

    2017-01-01

    Full Text Available Aim. It is hardly possible to predict the continued stability of the watercourse ecosystems without the study of biological characteristics and composition of organisms inhabiting them. In the last 35-40 years, environmental conditions of the Mingachevir reservoir are determined by the stationary anthropogenic pressure. It was found that such components of plankton as algae, bacteria and fungi play a leading role in the transformation and migration of pollutants. The role of the three groups of organisms is very important in maintaining the water quality by elimination of pollutants. Among the organisms inhabiting the Mingachevir Reservoir, micromycetes have not yet been studied. Therefore, the study of the species composition and seasonal dynamics, peculiarities of their growth and development in the environment with the presence of some of the pollutants should be considered to date.Methods. In order to determine the role of micromycetes-migrants in the mineralization of organic substrates, as an active participant of self-purification process, we used water samples from the bottom sediments as well as decaying and skeletonized stalks of cane, reeds, algae, macrophytes, exuvia of insects and fish remains submerged in water.Findings. For the first time, we obtained the data on the quality and quantity of microscopic mycelial fungi in freshwater bodies on the example of the Mingachevir water reservoir; we also studied the possibilities for oxygenating the autochthonous organic matter of allochthonous origin with micromycetes-migrants.Conclusions. It was found that the seasonal development of micromycetes-migrants within the Mingachevir reservoir is characterized by an increase in the number of species in the summer and a gradual reduction in species diversity in the fall. 

  18. SEISMIC ATTENUATION FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Joel Walls; M.T. Taner; Naum Derzhi; Gary Mavko; Jack Dvorkin

    2003-12-01

    We have developed and tested technology for a new type of direct hydrocarbon detection. The method uses inelastic rock properties to greatly enhance the sensitivity of surface seismic methods to the presence of oil and gas saturation. These methods include use of energy absorption, dispersion, and attenuation (Q) along with traditional seismic attributes like velocity, impedance, and AVO. Our approach is to combine three elements: (1) a synthesis of the latest rock physics understanding of how rock inelasticity is related to rock type, pore fluid types, and pore microstructure, (2) synthetic seismic modeling that will help identify the relative contributions of scattering and intrinsic inelasticity to apparent Q attributes, and (3) robust algorithms that extract relative wave attenuation attributes from seismic data. This project provides: (1) Additional petrophysical insight from acquired data; (2) Increased understanding of rock and fluid properties; (3) New techniques to measure reservoir properties that are not currently available; and (4) Provide tools to more accurately describe the reservoir and predict oil location and volumes. These methodologies will improve the industry's ability to predict and quantify oil and gas saturation distribution, and to apply this information through geologic models to enhance reservoir simulation. We have applied for two separate patents relating to work that was completed as part of this project.

  19. Sedimentation and sustainability of western American reservoirs

    Science.gov (United States)

    Graf, William L.; Wohl, Ellen; Sinha, Tushar; Sabo, John L.

    2010-12-01

    Reservoirs are sustainable only as long as they offer sufficient water storage space to achieve their design objectives. Life expectancy related to sedimentation is a measure of reservoir sustainability. We used data from the Army Corps of Engineers, U.S. Bureau of Reclamation, and U.S. Geological Survey (Reservoir Sedimentation Survey Information System II (RESIS II)) to explore the sustainability of American reservoirs. Sustainability varied by region, with the longest life expectancies in New England and the Tennessee Valley and the shortest in the interior west. In the Missouri and Colorado River basins, sedimentation and rates of loss of reservoir storage capacity were highly variable in time and space. In the Missouri River Basin, the larger reservoirs had the longest life expectancies, with some exceeding 1000 years, while smaller reservoirs in the basin had the shortest life expectancies. In the Colorado River Basin at the site of Glen Canyon Dam, sediment inflow varied with time, declining by half beginning in 1942 because of hydroclimate and upstream geomorphic changes. Because of these changes, the estimated life expectancy of Lake Powell increased from 300 to 700 years. Future surprise changes in sedimentation delivery and reservoir filling area are expected. Even though large western reservoirs were built within a limited period, their demise will not be synchronous because of varying sedimentation rates. Popular literature has incorrectly emphasized the possibility of rapid, synchronous loss of reservoir storage capacity and underestimated the sustainability of the water control infrastructure.

  20. Seismic Imaging of Reservoir Structure at The Geysers Geothermal Reservoir

    Science.gov (United States)

    Gritto, R.; Yoo, S.; Jarpe, S.

    2013-12-01

    Three-dimensional Vp/Vs-ratio structure is presented for The Geysers geothermal field using seismic travel-time data. The data were recorded by the Lawrence Berkeley National Laboratory (LBNL) using a 34-station seismic network. The results are based on 32,000 events recorded in 2011 and represent the highest resolution seismic imaging campaign at The Geysers to date. The results indicate low Vp/Vs-ratios in the central section of The Geysers within and below the current reservoir. The extent of the Vp/Vs anomaly deceases with increasing depth. Spatial correlation with micro-seismicity, used as a proxy for subsurface water flow, indicates the following. Swarms of seismicity correlate well with areas of high and intermediate Vp/Vs estimates, while regions of low Vp/Vs estimates appear almost aseismic. This result supports past observations that high and low Vp/Vs-ratios are related to water and gas saturated zones, respectively. In addition, the correlation of seismicity to intermediate Vp/Vs-ratios is supportive of the fact that the process of water flashing to steam requires four times more energy than the initial heating of the injected water to the flashing point. Because this energy is dawn from the reservoir rock, the associated cooling of the rock generates more contraction and thus seismic events than water being heated towards the flashing point. The consequences are the presence of some events in regions saturated with water, most events in regions of water flashing to steam (low steam saturation) and the absence of seismicity in regions of high steam concentrations where the water has already been converted to steam. Furthermore, it is observed that Vp/Vs is inversely correlated to Vs but uncorrelated to Vp, leading support to laboratory measurements on rock samples from The Geysers that observe an increase in shear modulus while the core samples are dried out. As a consequence, traditional poroelastic theory is no applicable at The Geysers geothermal

  1. Longitudinal gradients along a reservoir cascade

    Science.gov (United States)

    Miranda, L.E.; Habrat, M.D.; Miyazono, S.

    2008-01-01

    Reservoirs have traditionally been regarded as spatially independent entities rather than as longitudinal segments of a river system that are connected upstream and downstream to the river and other reservoirs. This view has frustrated advancement in reservoir science by impeding adequate organization of available information and by hindering interchanges with allied disciplines that often consider impounded rivers at the basin scale. We analyzed reservoir morphology, water quality, and fish assemblage data collected in 24 reservoirs of the Tennessee River; we wanted to describe longitudinal changes occurring at the scale of the entire reservoir series (i.e., cascade) and to test the hypothesis that fish communities and environmental factors display predictable gradients like those recognized for unimpounded rivers. We used a data set collected over a 7-year period; over 3 million fish representing 94 species were included in the data set. Characteristics such as reservoir mean depth, relative size of the limnetic zone, water retention time, oxygen stratification, thermal stratification, substrate size, and water level fluctuations increased in upstream reservoirs. Conversely, reservoir area, extent of riverine and littoral zones, access to floodplains and associated wetlands, habitat diversity, and nutrient and sediment inputs increased in downstream reservoirs. Upstream reservoirs included few, largely lacustrine, ubiquitous fish taxa that were characteristic of the lentic upper reaches of the basin. Fish species richness increased in a downstream direction from 12 to 67 species/ reservoir as riverine species became more common. Considering impoundments at a basin scale by viewing them as sections in a river or links in a chain may generate insight that is not always available when the impoundments are viewed as isolated entities. Basin-scale variables are rarely controllable but constrain the expression of processes at smaller scales and can facilitate the

  2. The freshwater reservoir effect in radiocarbon dating

    DEFF Research Database (Denmark)

    Philippsen, Bente

    2013-01-01

    of magnitude and degree of variability of the freshwater reservoir effect over short and long timescales. Radiocarbon dating of recent water samples, aquatic plants, and animals, shows that age differences of up to 2000 14C years can occur within one river. The freshwater reservoir effect has also implications...... for radiocarbon dating of Mesolithic pottery from inland sites of the Ertebølle culture in Northern Germany. The surprisingly old ages of the earliest pottery most probably are caused by a freshwater reservoir effect. In a sediment core from the Limfjord, northern Denmark, the impact of the freshwater reservoir...... effect on radiocarbon dating in an estuarine environment is examined. Here, freshwater influence causes reservoir ages to vary between 250 and 700 14C years during the period 5400 BC - AD 700. The examples in this study show clearly that the freshwater reservoir effect can seriously corrupt radiocarbon...

  3. Data Compression of Hydrocarbon Reservoir Simulation Grids

    KAUST Repository

    Chavez, Gustavo Ivan

    2015-05-28

    A dense volumetric grid coming from an oil/gas reservoir simulation output is translated into a compact representation that supports desired features such as interactive visualization, geometric continuity, color mapping and quad representation. A set of four control curves per layer results from processing the grid data, and a complete set of these 3-dimensional surfaces represents the complete volume data and can map reservoir properties of interest to analysts. The processing results yield a representation of reservoir simulation results which has reduced data storage requirements and permits quick performance interaction between reservoir analysts and the simulation data. The degree of reservoir grid compression can be selected according to the quality required, by adjusting for different thresholds, such as approximation error and level of detail. The processions results are of potential benefit in applications such as interactive rendering, data compression, and in-situ visualization of large-scale oil/gas reservoir simulations.

  4. A reservoir trap for antiprotons

    CERN Document Server

    Smorra, Christian; Franke, Kurt; Nagahama, Hiroki; Schneider, Georg; Higuchi, Takashi; Van Gorp, Simon; Blaum, Klaus; Matsuda, Yasuyuki; Quint, Wolfgang; Walz, Jochen; Yamazaki, Yasunori; Ulmer, Stefan

    2015-01-01

    We have developed techniques to extract arbitrary fractions of antiprotons from an accumulated reservoir, and to inject them into a Penning-trap system for high-precision measurements. In our trap-system antiproton storage times > 1.08 years are estimated. The device is fail-safe against power-cuts of up to 10 hours. This makes our planned comparisons of the fundamental properties of protons and antiprotons independent from accelerator cycles, and will enable us to perform experiments during long accelerator shutdown periods when background magnetic noise is low. The demonstrated scheme has the potential to be applied in many other precision Penning trap experiments dealing with exotic particles.

  5. Gas reservoir evaluation for underbalanced horizontal drilling

    Directory of Open Access Journals (Sweden)

    Li Gao

    2014-01-01

    Full Text Available A set of surface equipment for monitoring the parameters of fluid and pressure while drilling was developed, and mathematical models for gas reservoir seepage and wellbore two-phase flow were established. Based on drilling operation parameters, well structure and monitored parameters, the wellbore pressure and the gas reservoir permeability could be predicted theoretically for underbalanced horizontal drilling. Based on the monitored gas production along the well depth, the gas reservoir type could be identified.

  6. Ecological assessment of a southeastern Brazil reservoir

    OpenAIRE

    Martins,Isabela; Sanches,Barbara; Kaufmann,Philip Robert; Hughes,Robert M.; Santos,Gilmar Bastos; Molozzi,Joseline; Callisto, Marcos

    2015-01-01

    Reservoirs are artificial ecosystems with multiple functions having direct and indirect benefits to humans; however, they also cause ecological changes and influence the composition and structure of aquatic biota. Our objectives were to: (1) assess the environmental condition of Nova Ponte Reservoir, Minas Gerais state, southeastern Brazil; and (2) determine how the aquatic biota respond to disturbances. A total of 40 sites in the littoral zone of the reservoir were sampled to characterize ph...

  7. Time-lapse seismic within reservoir engineering

    OpenAIRE

    Oldenziel, T.

    2003-01-01

    Time-lapse 3D seismic is a fairly new technology allowing dynamic reservoir characterisation in a true volumetric sense. By investigating the differences between multiple seismic surveys, valuable information about changes in the oil/gas reservoir state can be captured. Its interpretation involves different disciplines, of which the main three are: reservoir management, rock physics, and seismics. The main challenge is expressed as "How to optimally benefit from time-lapse seismic". The chall...

  8. Multiscale ensemble filtering for reservoir engineering applications

    OpenAIRE

    Lawniczak, W.; Hanea, R.G.; Heemink, A.; Mclaughlin, D.

    2009-01-01

    Reservoir management requires periodic updates of the simulation models using the production data available over time. Traditionally, validation of reservoir models with production data is done using a history matching process. Uncertainties in the data, as well as in the model, lead to a nonunique history matching inverse problem. It has been shown that the ensemble Kalman filter (EnKF) is an adequate method for predicting the dynamics of the reservoir. The EnKF is a sequential Monte-Carlo a...

  9. Development of gas and gas condensate reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    In the study of gas reservoir development, the first year topics are restricted on reservoir characterization. There are two types of reservoir characterization. One is the reservoir formation characterization and the other is the reservoir fluid characterization. For the reservoir formation characterization, calculation of conditional simulation was compared with that of unconditional simulation. The results of conditional simulation has higher confidence level than the unconditional simulation because conditional simulation considers the sample location as well as distance correlation. In the reservoir fluid characterization, phase behavior calculations revealed that the component grouping is more important than the increase of number of components. From the liquid volume fraction with pressure drop, the phase behavior of reservoir fluid can be estimated. The calculation results of fluid recombination, constant composition expansion, and constant volume depletion are matched very well with the experimental data. In swelling test of the reservoir fluid with lean gas, the accuracy of dew point pressure forecast depends on the component characterization. (author). 28 figs., 10 tabs.

  10. Slimholes for geothermal reservoir evaluation - An overview

    Energy Technology Data Exchange (ETDEWEB)

    Hickox, C.E.

    1996-08-01

    The topics covered in this session include: slimhole testing and data acquisition, theoretical and numerical models for slimholes, and an overview of the analysis of slimhole data acquired by the Japanese. The fundamental issues discussed are concerned with assessing the efficacy of slimhole testing for the evaluation of geothermal reservoirs. the term reservoir evaluation is here taken to mean the assessment of the potential of the geothermal reservoir for the profitable production of electrical power. As an introduction to the subsequent presentations and discussions, a brief summary of the more important aspects of the use of slimholes in reservoir evaluation is given.

  11. Stretch due to Penile Prosthesis Reservoir Migration

    Directory of Open Access Journals (Sweden)

    E. Baten

    2016-03-01

    Full Text Available A 43-year old patient presented to the emergency department with stretch, due to impossible deflation of the penile prosthesis, 4 years after successful implant. A CT-scan showed migration of the reservoir to the left rectus abdominis muscle. Refilling of the reservoir was inhibited by muscular compression, causing stretch. Removal and replacement of the reservoir was performed, after which the prosthesis was well-functioning again. Migration of the penile prosthesis reservoir is extremely rare but can cause several complications, such as stretch.

  12. Freshwater reservoir effect variability in Northern Germany

    DEFF Research Database (Denmark)

    Philippsen, B.; Heinemeier, J.

    2013-01-01

    The freshwater reservoir effect is a potential problem when radiocarbon dating fish bones, shells, human bones, or food crusts on pottery from sites near rivers or lakes. The reservoir age in hardwater rivers can be up to several thousand years and may be highly variable. Accurate 14C dating...... of freshwater-based samples requires knowing the order of magnitude of the reservoir effect and its degree of variability. Measurements on modern riverine materials may not give a single reservoir age correction that can be applied to archaeological samples, but they show the order of magnitude and variability...

  13. Increasing Waterflooding Reservoirs in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Koerner, Roy; Clarke, Don; Walker, Scott

    1999-11-09

    The objectives of this quarterly report was to summarize the work conducted under each task during the reporting period April - June 1998 and to report all technical data and findings as specified in the ''Federal Assistance Reporting Checklist''. The main objective of this project is the transfer of technologies, methodologies, and findings developed and applied in this project to other operators of Slope and Basin Clastic Reservoirs. This project will study methods to identify sands with high remaining oil saturation and to recomplete existing wells using advanced completion technology.

  14. Reservoir Engineering for Unconventional Gas Reservoirs: What Do We Have to Consider?

    Energy Technology Data Exchange (ETDEWEB)

    Clarkson, Christopher R [ORNL

    2011-01-01

    The reservoir engineer involved in the development of unconventional gas reservoirs (UGRs) is required to integrate a vast amount of data from disparate sources, and to be familiar with the data collection and assessment. There has been a rapid evolution of technology used to characterize UGR reservoir and hydraulic fracture properties, and there currently are few standardized procedures to be used as guidance. Therefore, more than ever, the reservoir engineer is required to question data sources and have an intimate knowledge of evaluation procedures. We propose a workflow for the optimization of UGR field development to guide discussion of the reservoir engineer's role in the process. Critical issues related to reservoir sample and log analysis, rate-transient and production data analysis, hydraulic and reservoir modeling and economic analysis are raised. Further, we have provided illustrations of each step of the workflow using tight gas examples. Our intent is to provide some guidance for best practices. In addition to reviewing existing methods for reservoir characterization, we introduce new methods for measuring pore size distribution (small-angle neutron scattering), evaluating core-scale heterogeneity, log-core calibration, evaluating core/log data trends to assist with scale-up of core data, and modeling flow-back of reservoir fluids immediately after well stimulation. Our focus in this manuscript is on tight and shale gas reservoirs; reservoir characterization methods for coalbed methane reservoirs have recently been discussed.

  15. Estimation of Bank Erosion Due To Reservoir Operation in Cascade (Case Study: Citarum Cascade Reservoir

    Directory of Open Access Journals (Sweden)

    Sri Legowo

    2009-11-01

    Full Text Available Sedimentation is such a crucial issue to be noted once the accumulated sediment begins to fill the reservoir dead storage, this will then influence the long-term reservoir operation. The sediment accumulated requires a serious attention for it may influence the storage capacity and other reservoir management of activities. The continuous inflow of sediment to the reservoir will decrease the capacity of reservoir storage, the reservoir value in use, and the useful age of reservoir. Because of that, the rate of the sediment needs to be delayed as possible. In this research, the delay of the sediment rate is considered based on the rate of flow of landslide of the reservoir slope. The rate of flow of the sliding slope can be minimized by way of each reservoir autonomous efforts. This effort can be performed through; the regulation of fluctuating rate of reservoir surface current that does not cause suddenly drawdown and upraising as well. The research model is compiled using the searching technique of Non Linear Programming (NLP.The rate of bank erosion for the reservoir variates from 0.0009 to 0.0048 MCM/year, which is no sigrificant value to threaten the life time of reservoir.Mean while the rate of watershed sediment has a significant value, i.e: 3,02 MCM/year for Saguling that causes to fullfill the storage capacity in 40 next years (from years 2008.

  16. Worldwide Experience of Sediment Flushing Through Reservoirs

    Directory of Open Access Journals (Sweden)

    Muhammad Asif Chaudhry

    2012-07-01

    Full Text Available Globally there are about 25,500 storage reservoirs with total storage volume of about 6,464 Bcm. The maximum number of reservoirs are in North America, i.e. 7205 with the total storage volume of about 1,844 Bcm, whereas minimum number of reservoirs are in Central Asia, i.e. 44, with the total storage volume of about 148 Bcm. Over the globe, average annual reservoir storage loss due to sedimentation varies from 0.1-2.3%, however, average annual world storage loss is about 1.0%. In order to combat the storage loss, the techniques used globally are: watershed management, dredging of deposited sediments, sediment routing/sluicing, sediment bypassing, density current venting and sediment flushing through reservoir, separately and also in combination. Each approach has its own limitations, depending on the site conditions. Sediment flushing technique is used by two ways i.e. Drawdown flushing and Emptying and Flushing. In Emptying and Flushing, the reservoir is emptied before the flood season, resulting in the creation of river-like flow conditions in the reservoir. The flow velocities in the reservoir are increased to such an extent that deposited sediments are remobilized and transported through the low level outlets provided slightly above the original riverbed level with sufficient flow capacity. Flushing is not a new technique and has been experienced for the last 6 decades on several reservoirs of the world. The results of the study reveal that there are about 50 reservoirs which are flushed, out of which flushing data is available for about 22 reservoirs only. However 6 reservoirs have been found with successful application of flushing operation and all other are flushed with low flushing efficiency. Flushing has been successfully implemented at Baira-India, Gebidem-Switzerland, Gmund-Austria, Hengshan-China, Palagnedraswitzerland, Santo-Domingo-Venezuela Reservoirs, while the unsuccessfully flushed reservoirs are: Chinese reservoirs, Gaunting

  17. Exploration on ecological regulation of the reservoirs

    Institute of Scientific and Technical Information of China (English)

    Cai Qihua

    2009-01-01

    Reservoir regulation process in the Yangtze River basin is mainly divided into two types of flood regulation and initiating benefit regulation. The present reservoir management system and operation mode are mainly for dealing with or coordinating of flood control and benefit initiation as well as benefit distribution among various beneficial functions. From the view point of river ecosystem protection, the current regulation mode has two kinds of problems: firstly, most of the reservoir regulation plans do not consider ecosystem protection at downstream of dams and needs of environment protection in reservoir areas; secondly, integrated regulation or management of water resources is ignored. It is very necessary to improve reservoir regulation mode, bearing problems faced by regulation of the Three Gorges reservoir and issues related to cascade development and regulation in Tuojiang and Minjiang River basins in mind. In accordance with the concept of scientific development, and the philosophy of "ensuring a healthy Yangtze River and promoting the har-mony between human and water", taking flood control, benefit initiation and eco-system as a whole, this paper put for-ward the basic consideration to improve reservoir regulation as follows : on the basis of requirements of ecosystem protec-tion at downstream of dams and needs of environment protection in reservoir areas, we should bring the functions of res-ervoir such as flood control and benefit initiation into full play, control the negative influence to the ecosystem at down-stream of dams and the environment in reservoir areas in an endurable scope, and restore the ecosystem and the environ-ment step by step. This paper put forward the relevant regulation process aiming at the idiographic problems such as pro-tection of ecosystem at downstream of dams and environment in reservoir areas, protection of aquatic wildlife species and fish species, regulation of sediment and protection of wetland.

  18. Water resources review: Wheeler Reservoir, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Wallus, R.; Cox, J.P.

    1990-09-01

    Protection and enhancement of water quality is essential for attaining the full complement of beneficial uses of TVA reservoirs. The responsibility for improving and protecting TVA reservoir water quality is shared by various federal, state, and local agencies, as well as the thousands of corporations and property owners whose individual decisions affect water quality. TVA's role in this shared responsibility includes collecting and evaluating water resources data, disseminating water resources information, and acting as a catalyst to bring together agencies and individuals that have a responsibility or vested interest in correcting problems that have been identified. This report is one in a series of status reports that will be prepared for each of TVA's reservoirs. The purpose of this status report is to provide an up-to-date overview of the characteristics and conditions of Wheeler Reservoir, including: reservoir purposes and operation; physical characteristics of the reservoir and the watershed; water quality conditions: aquatic biological conditions: designated, actual, and potential uses of the reservoir and impairments of those uses; ongoing or planned reservoir management activities. Information and data presented here are form the most recent reports, publications, and original data available. 21 refs., 8 figs., 29 tabs.

  19. Time-lapse seismic within reservoir engineering

    NARCIS (Netherlands)

    Oldenziel, T.

    2003-01-01

    Time-lapse 3D seismic is a fairly new technology allowing dynamic reservoir characterisation in a true volumetric sense. By investigating the differences between multiple seismic surveys, valuable information about changes in the oil/gas reservoir state can be captured. Its interpretation involves d

  20. Economics of Developing Hot Stratigraphic Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Greg Mines; Hillary Hanson; Rick Allis; Joseph Moore

    2014-09-01

    Stratigraphic geothermal reservoirs at 3 – 4 km depth in high heat-flow basins are capable of sustaining 100 MW-scale power plants at about 10 c/kWh. This paper examines the impacts on the levelized cost of electricity (LCOE) of reservoir depth and temperature, reservoir productivity, and drillhole/casing options. For a reservoir at 3 km depth with a moderate productivity index by hydrothermal reservoir standards (about 50 L/s/MPa, 5.6 gpm/psi), an LCOE of 10c/kWh requires the reservoir to be at about 200°C. This is the upper temperature limit for pumps. The calculations assume standard hydrothermal drilling costs, with the production interval completed with a 7 inch liner in an 8.5 inch hole. If a reservoir at 4 km depth has excellent permeability characteristics with a productivity index of 100 L/s/MPa (11.3 gpm/psi), then the LCOE is about 11 c/kWh assuming the temperature decline rate with development is not excessive (< 1%/y, with first thermal breakthrough delayed by about 10 years). Completing wells with modest horizontal legs (e.g. several hundred meters) may be important for improving well productivity because of the naturally high, sub-horizontal permeability in this type of reservoir. Reducing the injector/producer well ratio may also be cost-effective if the injectors are drilled as larger holes.

  1. Time-lapse seismic within reservoir engineering

    NARCIS (Netherlands)

    Oldenziel, T.

    2003-01-01

    Time-lapse 3D seismic is a fairly new technology allowing dynamic reservoir characterisation in a true volumetric sense. By investigating the differences between multiple seismic surveys, valuable information about changes in the oil/gas reservoir state can be captured. Its interpretation involves d

  2. Seismic determination of saturation in fractured reservoirs

    Science.gov (United States)

    Brown, R.L.; Wiggins, M.L.; Gupta, A.

    2002-01-01

    Detecting the saturation of a fractured reservoir using shear waves is possible when the fractures have a geometry that induces a component of movement perpendicular to the fractures. When such geometry is present, vertically traveling shear waves can be used to examine the saturation of the fractured reservoir. Tilted, corrugated, and saw-tooth fracture models are potential examples.

  3. Geothermal reservoir insurance study. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-09

    The principal goal of this study was to provide analysis of and recommendations on the need for and feasibility of a geothermal reservoir insurance program. Five major tasks are reported: perception of risk by major market sectors, status of private sector insurance programs, analysis of reservoir risks, alternative government roles, and recommendations.

  4. Time-lapse seismic within reservoir engineering

    NARCIS (Netherlands)

    Oldenziel, T.

    2003-01-01

    Time-lapse 3D seismic is a fairly new technology allowing dynamic reservoir characterisation in a true volumetric sense. By investigating the differences between multiple seismic surveys, valuable information about changes in the oil/gas reservoir state can be captured. Its interpretation involves

  5. Petroleum reservoir engineering - a personal perspective

    Energy Technology Data Exchange (ETDEWEB)

    Archer, J.S. [Imperial Coll. of Science and Technology, London (United Kingdom)

    1996-12-31

    This paper was invited as part of the Ad 1995 - NW Europe`s Hydrocarbon Industry Symposium to mark Aberdeen University`s 500th Anniversay. The author has been taken the opportunity to recall, from a highly personal and selective perspective, some of the events of the last 25 years in reservoir engineering, through his own experiences of North Sea fields. The first part of the paper sets the background to reservoir engineering through some of the key contributions to the literature. The second part recalls the early North Sea reservoir planning and the emergence of multidisciplinary approaches to reservoir characterization and asset management. The third part of the paper focuses on reservoir engineering research at Imperial College, and the final part poses a number of questions on the future of reservoir engineering in a UK North Sea context. The author does not intend to provide a critical appraisal of the reservoir engineering literature that has emerged in the last 25 years, therefore, the reservoir engineering with which the author has been most closely associated naturally receives the greatest prominence in a paper of this type. In no way should this be construed as a claim to invention. (author)

  6. Identifying and Evaluating of Oil Reservoir

    Institute of Scientific and Technical Information of China (English)

    Yang Haixia

    2002-01-01

    The identification and evaluation of oil reservoir with logging data are one of most important ways in geologic logging services. For the last decades, with the further development of the oil & gas exploration, great advances have been achieved in techniques on the acquisition, processing and interpretative evaluation of logging data. How to identify fluid characteristics and evaluate the productivity in light oil reservoir (the crude density being between 0.74g/cm3 and 0.82g/cm3)has become one of the difficulties.With the establishment of the regional interpretation criterion of the study blocks, the optimized logging parameters that reflect the reservoir characteristics have been used to establish the chart for the interpretation of oil-water reservoir combining with well logging parameters. Then, to begin with geologic reserves of crude in single well, we establish evaluation criterion for productivity in oil reservoir with determining lower limit value of the reservoir and applying the relationship between chart parameters. The techniques are verified in production and get better effect.On the basis of the reservoir characteristics analysis of both basin A and B, We established the evaluation method of static productivity on light oil reservoir with getting quantitative evaluation parameters after quantitatively evaluating the date of core, pyrolysis chromatogram and gas chromatogram. It provides new technique 7 for new well interpretation and old well review, as well as evidence for project.design of well testing.

  7. Advances in carbonate exploration and reservoir analysis

    Science.gov (United States)

    Garland, J.; Neilson, J.E.; Laubach, S.E.; Whidden, K.J.

    2012-01-01

    Carbonate reservoirs contain an increasingly important percentage of the world’s hydrocarbon reserves. This volume presents key recent advances in carbonate exploration and reservoir analysis. As well as a comprehensive overview of the trends in carbonate over the years, the volume focuses on four key areas:

  8. Zooplankton of the Zaporiz’ke Reservoir

    Directory of Open Access Journals (Sweden)

    T. V. Mykolaichuk

    2006-01-01

    Full Text Available The paper is devoted to zooplankton species composition in the Zaporiz’ke Reservoir. The greatest species diversity was found in the macrophyte communities of the upper reservoir’s littoral, but the least zooplankton diversity – in the pelagic zone of the lower reservoir.

  9. Ichthyofauna of the reservoirs of Central Vietnam

    Directory of Open Access Journals (Sweden)

    I. A. Stolbunov

    2012-01-01

    Full Text Available Species composition, distribution and abundance of fish in the pelagic and littoral zone of four reservoirs of Central Vietnam (Suoi Chau, Kam Lam, Da Ban and Suoi Dau were studied first. According to the research data the fish community of the reservoirs is represented by 43 species of 19 fish families.

  10. Reservoir optimization for the synthetic brugge field

    NARCIS (Netherlands)

    Peters, E.; Leeuwenburgh, O.; Egberts, P.J.P.

    2009-01-01

    Increasing availability of data and tools for history matching and optimisation brings the long-term goal of closed loop reservoir management closer. However, still many issues are not solved. An example is the interaction between the history match of the reservoir model and the optimisation. How im

  11. Multiscale ensemble filtering for reservoir engineering applications

    NARCIS (Netherlands)

    Lawniczak, W.; Hanea, R.G.; Heemink, A.; McLaughlin, D.

    2009-01-01

    Reservoir management requires periodic updates of the simulation models using the production data available over time. Traditionally, validation of reservoir models with production data is done using a history matching process. Uncertainties in the data, as well as in the model, lead to a nonunique

  12. Advances in China's Oil Reservoir Description Technique

    Institute of Scientific and Technical Information of China (English)

    Mu Longxin; Huang Shiyan; Jia Ailin; Rong Jiashu

    1997-01-01

    @@ Oil reservoir description in China has undergone rapid development in recent years. Extensive research carried out at various oilfields and petroleum universities has resulted in the formulation of comprehensive oil reservoir description techniques and methods uniquely suited to the various development phases of China's continental facies. The new techniques have the following characteristics:

  13. Increasing Waterflood Reserves in the Wilmington Oil Field Through Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Chris Phillips; Dan Moos; Don Clarke; John Nguyen; Kwasi Tagbor; Roy Koerner; Scott Walker

    1997-04-10

    This project is intended to increase recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project.

  14. Production Optimization of Oil Reservoirs

    DEFF Research Database (Denmark)

    Völcker, Carsten

    with emphasis on optimal control of water ooding with the use of smartwell technology. We have implemented immiscible ow of water and oil in isothermal reservoirs with isotropic heterogenous permeability elds. We use the method of lines for solution of the partial differential equation (PDE) system that governs...... the uid ow. We discretize the the two-phase ow model spatially using the nite volume method (FVM), and we use the two point ux approximation (TPFA) and the single-point upstream (SPU) scheme for computing the uxes. We propose a new formulation of the differential equation system that arise...... as a consequence of the spatial discretization of the two-phase ow model. Upon discretization in time, the proposed equation system ensures the mass conserving property of the two-phase ow model. For the solution of the spatially discretized two-phase ow model, we develop mass conserving explicit singly diagonally...

  15. Bottomwater drive in tarmat reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Al-Kaabi, A.A.; Menouar, H.; Al-Marhoun, M.A.; Al-Hashim, H.S.

    1988-05-01

    This paper addresses the class of tarmat reservoirs subject to bottomwater drive. Different shapes of tar layers are simulated physically and numerically to study the behavior of WOR and oil recovery. Four different cases were studied: a square barrier beneath the well, a disk beneath the well, a hollow square or disk beneath the well, and a half plane. The results showed that breakthrough time occurs earlier in the case of hollow tarmat barriers, while it is delayed considerably in the case of tarmat barriers shaped in the form of a disk beneath the well. Paradoxically, in this last case, the WOR increases more rapidly and becomes higher toward the end of the depletion than in any other case. Among all the cases studied, the no-barrier case gives the highest recovery, while the hollow-tarmat-barrier case leads to the lowest recovery.

  16. Rodent reservoirs of future zoonotic diseases.

    Science.gov (United States)

    Han, Barbara A; Schmidt, John Paul; Bowden, Sarah E; Drake, John M

    2015-06-02

    The increasing frequency of zoonotic disease events underscores a need to develop forecasting tools toward a more preemptive approach to outbreak investigation. We apply machine learning to data describing the traits and zoonotic pathogen diversity of the most speciose group of mammals, the rodents, which also comprise a disproportionate number of zoonotic disease reservoirs. Our models predict reservoir status in this group with over 90% accuracy, identifying species with high probabilities of harboring undiscovered zoonotic pathogens based on trait profiles that may serve as rules of thumb to distinguish reservoirs from nonreservoir species. Key predictors of zoonotic reservoirs include biogeographical properties, such as range size, as well as intrinsic host traits associated with lifetime reproductive output. Predicted hotspots of novel rodent reservoir diversity occur in the Middle East and Central Asia and the Midwestern United States.

  17. Reservoir management under geological uncertainty using fast model update

    NARCIS (Netherlands)

    Hanea, R.; Evensen, G.; Hustoft, L.; Ek, T.; Chitu, A.; Wilschut, F.

    2015-01-01

    Statoil is implementing "Fast Model Update (FMU)," an integrated and automated workflow for reservoir modeling and characterization. FMU connects all steps and disciplines from seismic depth conversion to prediction and reservoir management taking into account relevant reservoir uncertainty. FMU del

  18. A new case of reservoir triggered seismicity: Govind Ballav Pant reservoir (Rihand dam), central India

    Science.gov (United States)

    Gahalaut, Kalpna; Gahalaut, V. K.; Pandey, M. R.

    2007-07-01

    We report here that seismicity near Govind Ballav Pant reservoir is strongly influenced by the reservoir operations. It is the second largest reservoir in India, which is built on Rihand river in the failed rift region of central India. Most of the earthquakes occurred during the high water stand in the reservoir with a time lag of about 1 month. We use the concept of coulomb stress change and use Green's function based approach to estimate stresses and pore pressure due to the reservoir load. We find that the reservoir increases coulomb stress on the nearby faults of the region that are favourably oriented for failure in predominantly reverse slip manner under the NNE-SSW compression and thus promotes failure. The above two factors make it an obvious, yet so far unreported case of reservoir triggered seismicity.

  19. Dynamic dam-reservoir interaction analysis including effect of reservoir boundary absorption

    Institute of Scientific and Technical Information of China (English)

    LIN; Gao; DU; JianGuo; HU; ZhiQiang

    2007-01-01

    Based on the scaled boundary finite-element method,the governing equations for the analysis of dam-reservoir interaction including the reservoir boundary absorption are developed.Coupling with the equation of dam-unbounded foundation interaction,it can effectively carry out the earthquake response analysis of dam-reservoir-foundation system.The proposed approach has the advantages that the effect of compressibility of reservoir water as well as the energy absorption of reservoir boundary on the earthquake response of arch dams and gravity dams can be efficiently evaluated and higher accuracy can be achieved.In comparison with the methods available in the literature,the computational cost can be reduced to a great extent.It facilitates the application of earthquake response analysis of dam-reservoir-foundation system including reservoir boundary absorption to the engineering practice.

  20. Improving Reservoir Simulation using Seismic Data

    Science.gov (United States)

    Shamsa, Amir

    The principal premise of this thesis is that the ambiguities of reservoir simulation can be and should be reduced by using time-lapse seismic data. Such data can be considered as a sort of reservoir dynamic data, with distinctive features compared to the typical reservoir production data. While well production data are sparse in space and dense in time, 4D timelapse seismic can be utilized to fill the spatial data gaps between wells. This provides an opportunity to constrain reservoir dynamic behaviour not only at well locations but also between them by honoring time lapse response of the reservoir. This means that seismic assisted history matching should involve a simultaneous minimization of the mismatch between all types of measured and simulated data including seismic data. This thesis is an effort to discuss critical aspects of integrating 4D time-lapse data in reservoir simulation and history matching. I have illustrated a detailed scheme of seismic assisted history matching with implications on real data, to emphasize the extra value that seismic data can bring into the conventional reservoir history matching. This goal was followed by developing a software application to assess the feasibility of the theory at industrial scales. In addition to the conventional oils, a significant effort has been devoted to extend the scope of the work to viscoelastic heavy oils and their fluid substitution models in thermal cases. I also studied the production/injection induced stresses impacts on anisotropic velocity variations, using coupled geomechanical-flow simulations. (Abstract shortened by UMI.).

  1. Stochastic Reservoir Characterization Constrained by Seismic Data

    Energy Technology Data Exchange (ETDEWEB)

    Eide, Alfhild Lien

    1999-07-01

    In order to predict future production of oil and gas from a petroleum reservoir, it is important to have a good description of the reservoir in terms of geometry and physical parameters. This description is used as input to large numerical models for the fluid flow in the reservoir. With increased quality of seismic data, it is becoming possible to extend their use from the study of large geologic structures such as seismic horizons to characterization of the properties of the reservoir between the horizons. Uncertainties because of the low resolution of seismic data can be successfully handled by means of stochastic modeling, and spatial statistics can provide tools for interpolation and simulation of reservoir properties not completely resolved by seismic data. This thesis deals with stochastic reservoir modeling conditioned to seismic data and well data. Part I presents a new model for stochastic reservoir characterization conditioned to seismic traces. Part II deals with stochastic simulation of high resolution impedance conditioned to measured impedance. Part III develops a new stochastic model for calcite cemented objects in a sandstone background; it is a superposition of a marked point model for the calcites and a continuous model for the background.

  2. The Tanggu geothermal reservoir (Tianjin, China)

    Energy Technology Data Exchange (ETDEWEB)

    Axelsson, Gudni [Virkir-Orkint Consulting Group and National Energy Authority, Reykjavik (Iceland); Zhilin Dong [Tanggu Geothermal Office, Tianjin (China)

    1998-06-01

    The Tanggu geothermal system is an extensive, highly permeable, horizontal sandstone reservoir, situated within the North China Sedimentary Basin. Twenty-three successful production wells, yielding water with an average temperature of about 70degC, have been drilled into this reservoir since 1987, distributed over an area of some 330 km{sup 2}. The hot water is mostly used for space heating. In 1995 the annual production exceeded 5 million tons. Hot water extraction has caused the water level to drop to a depth of 80 m in the production wells, and it continues to decline at a rate of 3-4 m per year. This has raised the question as to whether the reservoir may be overexploited. The main objective of a reservoir evaluation carried out in 1996 was to estimate the long-term production potential of the Tanggu reservoir. Two simple models were developed for this purpose. The potential is determined by specifying a maximum allowable pump setting depth of 150 m . On this basis the potential of the Tanggu reservoir is estimated to be about 10 million tons per year, for the next ten years. A comprehensive reservoir management program must be implemented in Tanggu. The first priority of such a program should be to improve the energy efficiency of space heating in the district, which should result in about 50% reduction in hot water consumption. Another management option is reinjection, which would counteract the water level draw-down. (Author)

  3. Reservoir stimulation techniques to minimize skin factor of Longwangmiao Fm gas reservoirs in the Sichuan Basin

    Directory of Open Access Journals (Sweden)

    Guo Jianchun

    2014-10-01

    Full Text Available The Lower Cambrian Longwangmiao Fm carbonatite gas reservoirs in the Leshan-Longnüsi Paleouplift in the Sichuan Basin feature strong heterogeneity, well-developed fractures and caverns, and a high content of H2S, so these reservoirs are prone to reservoir damages caused by the invasion of drilling fluid or the improper well completion, so to minimize the reservoir skin factor is key to achieving high yield of oil and gas in this study area. Therefore, based on the geological characteristics of the Longwangmiao reservoirs, the binomial productivity equation was applied to demonstrate the possibility and scientificity of minimizing the skin factor. According to the current status of reservoir stimulation, the overall skin factors of reservoir damage caused by drilling fluid invasion, improper drilling and completion modes etc were analyzed, which shows there is still potential for skin factor reduction. Analysis of reservoir damage factors indicates that the main skin factor of Longwangmiao Fm reservoirs consists of that caused by drilling fluid and by improper completion modes. Along with the minimization of skin factor caused by drilling and improper completion, a fracture-network acidizing process to achieve “non-radial & network-fracture” plug-removal by making good use of natural fractures was proposed according to the characteristics of Longwangmiao Fm carbonatite reservoirs.

  4. Ecological operation for Three Gorges reservoir

    Directory of Open Access Journals (Sweden)

    Wen-xian GUO

    2011-06-01

    Full Text Available The traditional operation rule of Three Gorges reservoir has mainly focused on water for flood control, power generation, navigation, water supply and recreation and given less attention to the negative impacts of reservoir operation on river ecosystem. In order to reduce the negative influence of reservoir operation, ecological operation of the reservoir should be studied to maintain healthy river ecosystem. The study considered the ecological operation targets, including maintaining river environmental flow and protecting the spawning and reproduction of Chinese sturgeon and four major Chinese carps. Based on the flow data from 1900 to 2006 of Yichang gauge as the control station of the Yangtze River, the minimal and optimal river environmental flows were analyzed, and eco-hydrological targets of Chinese sturgeon and four major Chinese carps in the Yangtze River were calculated. The paper proposed a reservoir ecological operation model of comprehensively considering flood control, power generation, navigation and ecological environment. Three typical periods including wet, normal and dry year were selected and particle swarm optimization was applied to analyze the model. The results show that there are different influences of ecological operation rules on economic benefit of hydropower station and reservoir ecological operation model can simulate the flood pulse for requirement of spawning of Chinese sturgeon and four major Chinese carps. Finally, ecological operation measures of Three Gorges reservoir were proposed. According to the results, by adopting a suitable re-operation scheme, the hydropower benefit of the reservoir will not decrease dramatically while the ecological demand can be met. The results provide the reference for making the reasonable operation schemes for Three Gorges reservoir.

  5. Improving reservoir history matching of EM heated heavy oil reservoirs via cross-well seismic tomography

    KAUST Repository

    Katterbauer, Klemens

    2014-01-01

    Enhanced recovery methods have become significant in the industry\\'s drive to increase recovery rates from oil and gas reservoirs. For heavy oil reservoirs, the immobility of the oil at reservoir temperatures, caused by its high viscosity, limits the recovery rates and strains the economic viability of these fields. While thermal recovery methods, such as steam injection or THAI, have extensively been applied in the field, their success has so far been limited due to prohibitive heat losses and the difficulty in controlling the combustion process. Electromagnetic (EM) heating via high-frequency EM radiation has attracted attention due to its wide applicability in different environments, its efficiency, and the improved controllability of the heating process. While becoming a promising technology for heavy oil recovery, its effect on overall reservoir production and fluid displacements are poorly understood. Reservoir history matching has become a vital tool for the oil & gas industry to increase recovery rates. Limited research has been undertaken so far to capture the nonlinear reservoir dynamics and significantly varying flow rates for thermally heated heavy oil reservoir that may notably change production rates and render conventional history matching frameworks more challenging. We present a new history matching framework for EM heated heavy oil reservoirs incorporating cross-well seismic imaging. Interfacing an EM heating solver to a reservoir simulator via Andrade’s equation, we couple the system to an ensemble Kalman filter based history matching framework incorporating a cross-well seismic survey module. With increasing power levels and heating applied to the heavy oil reservoirs, reservoir dynamics change considerably and may lead to widely differing production forecasts and increased uncertainty. We have shown that the incorporation of seismic observations into the EnKF framework can significantly enhance reservoir simulations, decrease forecasting

  6. Outer boundary effects in a petroleum reservoir

    Science.gov (United States)

    Nelson, Rhodri; Crowdy, Darren; Kropf, Everett; Zuo, Lihua; Weijermars, Ruud

    2016-11-01

    A new toolkit for potential theory based on the Schottky-Klein prime function is first introduced. This potential theory toolkit is then applied to study the fluid flow structures in bounded 2D petroleum reservoirs. In the model, reservoirs are assumed to be heterogeneous and isotropic porous medium and can thus be modelled using Darcy's equation. First, computations of flow contours are carried out on some 'test' domains and benchmarked against results from the ECLIPSE reservoir simulator. Following this, a case study of the Quitman oil field in Texas is presented.

  7. TRANSFER RESERVOIR AS A RAINWATER DRAINAGE SYSTEM

    Directory of Open Access Journals (Sweden)

    Robert Malmur

    2016-06-01

    Full Text Available Intensive rainfalls and snow melting often cause floods in protected areas and overflow the existing sewage systems. Such cases are particularly burdensome for the inhabitants and cause considerable physical losses. One of the possible constructional solutions to ensure the effective outflow of stormwater are transfer reservoirs located between the draining system and a receiver set discussed in this paper. If gravity outflow of sewage is impossible, the initial part of sewage volume is accumulated in the transfer reservoir and then it is transferred into the water receiver set. However, gravity discharge of sewage to the water receiver set occurs through transfer chambers in the transfer reservoir.

  8. Production-induced changes in reservoir geomechanics

    Science.gov (United States)

    Amoyedo, Sunday O.

    Sand production remains a source of concern in both conventional and heavy oil production. Porosity increase and changes in local stress magnitude, which often enhance permeability, have been associated with severe sanding. On the other hand, sand production has been linked to a large number of field incidences involving loss of well integrity, casing collapse and corrosion of down-hole systems. It also poses problems for separators and transport facilities. Numerous factors such as reservoir consolidation, well deviation angle through the reservoir, perforation size, grain size, capillary forces associated with water cut, flow rate and most importantly reservoir strain resulting from pore pressure depletion contribute to reservoir sanding. Understanding field-specific sand production patterns in mature fields and poorly consolidated reservoirs is vital in identifying sand-prone wells and guiding remedial activities. Reservoir strain analysis of Forties Field, located in the UK sector of the North Sea, shows that the magnitude of the production-induced strain, part of which is propagated to the base of the reservoir, is of the order of 0.2 %, which is significant enough to impact the geomechanical properties of the reservoir. Sand production analysis in the field shows that in addition to poor reservoir consolidation, a combined effect of repeated perforation, high well deviation, reservoir strain and high fluid flow rate have contributed significantly to reservoir sanding. Knowledge of reservoir saturation variation is vital for in-fill well drilling, while information on reservoir stress variation provides a useful guide for sand production management, casing design, injector placement and production management. Interpreting time-lapse difference is enhanced by decomposing time-lapse difference into saturation, pressure effects and changes in rock properties (e.g. porosity) especially in highly compacting reservoirs. Analyzing the stress and saturation

  9. The freshwater reservoir effect in radiocarbon dating

    DEFF Research Database (Denmark)

    Philippsen, Bente

    case studies will show the degree of variability of the freshwater reservoir effect over short and long timescales. Radiocarbon dating of recent water samples, aquatic plants and animals, shows that age differences of up to 2000 years can occur within one river. In the Limfjord, freshwater influence...... caused reservoir ages to vary between 250 and 700 years during the period 5400 BC - AD 700. Finally, I will discuss the implications of the freshwater reservoir effect for radiocarbon dating of Mesolithic pottery from inland sites of the Ertebølle culture in Northern Germany....

  10. Freshwater reservoir effect variability in Northern Germany

    DEFF Research Database (Denmark)

    Philippsen, Bente; Heinemeier, Jan

    2012-01-01

    The freshwater reservoir effect is a potential problem when radiocarbon dating fishbones, shells, human bones or food crusts on pottery from sites next to rivers or lakes. The reservoir age in rivers containing considerable amounts of dissolved 14C-free carbonates can be up to several thousand...... years and may be highly variable. For accurate radiocarbon dating of freshwater-based samples, the order of magnitude of the reservoir effect as well as the degree of variability has to be known. The initial problem in this case was the accurate dating of food crusts on pottery from the Mesolithic sites...

  11. Evaluation of an Empirical Reservoir Shape Function to Define Sediment Distributions in Small Reservoirs

    OpenAIRE

    Bogusław Michalec

    2015-01-01

    Understanding and defining the spatial distribution of sediment deposited in reservoirs is essential not only at the design stage but also during the operation. The majority of research concerns the distribution of sediment deposition in medium and large water reservoirs. Most empirical methods do not provide satisfactory results when applied to the determination of sediment deposition in small reservoirs. Small reservoir’s volumes do not exceed 5 × 106 m3 and their capacity-inflow ratio is l...

  12. Lower Palaeozoic reservoirs of North Africa

    Energy Technology Data Exchange (ETDEWEB)

    Crossley, R.; McDougall, N. [Robertson Research International Ltd., Llandudno, Conwy (United Kingdom)

    1998-12-31

    This paper provides an overview of features considered significant in the exploration and development of Lower Palaeozoic reservoirs of North Africa. Information is derived from a review of literature on the Lower Palaeozoic successions of North Africa, combined with outcrop observations from the Anti Atlas mountains of Morocco. The focus of the exploration-oriented part of the review is on identification of potential traps other than two-way structural dip closure. Stratigraphic elements described include depositional models of reservoir facies, tectonic unconformities and possible eustatic unconformities. Cases of established or potential trapping by post-depositional faulting by diagenesis and by hydrodynamic flow are examined. Development-related topics highlighted include the impact on reservoir matrix quality of burial diagenesis and of palaeo-weathering at the Hercynian unconformity. Other issues discussed which additionally affect producibility from the reservoir matrix include tectonic fracturing, palaeotopography and unloading fracturing at the Hercynian unconformity, and induced fracturing within the present stress regimes. (author)

  13. Reservoir Greenhouse Gas Emissions at Russian HPP

    Energy Technology Data Exchange (ETDEWEB)

    Fedorov, M. P.; Elistratov, V. V.; Maslikov, V. I.; Sidorenko, G. I.; Chusov, A. N.; Atrashenok, V. P.; Molodtsov, D. V. [St. Petersburg State Polytechnic University (Russian Federation); Savvichev, A. S. [Russian Academy of Sciences, S. N. Vinogradskii Institute of Microbiology (Russian Federation); Zinchenko, A. V. [A. I. Voeikov Main Geophysical Observatory (Russian Federation)

    2015-05-15

    Studies of greenhouse-gas emissions from the surfaces of the world’s reservoirs, which has demonstrated ambiguity of assessments of the effect of reservoirs on greenhouse-gas emissions to the atmosphere, is analyzed. It is recommended that greenhouse- gas emissions from various reservoirs be assessed by the procedure “GHG Measurement Guidelines for Fresh Water Reservoirs” (2010) for the purpose of creating a data base with results of standardized measurements. Aprogram for research into greenhouse-gas emissions is being developed at the St. Petersburg Polytechnic University in conformity with the IHA procedure at the reservoirs impounded by the Sayano-Shushenskaya and Mainskaya HPP operated by the RusHydro Co.

  14. The glaciogenic reservoir analogue studies project (GRASP)

    DEFF Research Database (Denmark)

    Moscariello, A.; Moreau, Julien; Vegt, P. van der

    Tunnel galleys are common features in Palaeozoic glacigenic succession in North Afrcica and Middle East and they are amongst the most challenging target for hydrocarbon exploration and developing drilling in these regions. Similarly, these buried valleys form important groundwater reservoirs...

  15. Fishery management plan for the Dorris reservoir

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Fishery Management Plan for Dorris Reservoir at Modoc National Wildlife Refuge. The U.S. Fish and Wildlife service proposes to continue a public fishing program...

  16. Overdamped stochastic thermodynamics with multiple reservoirs

    Science.gov (United States)

    Murashita, Yûto; Esposito, Massimiliano

    2016-12-01

    After establishing stochastic thermodynamics for underdamped Langevin systems in contact with multiple reservoirs, we derive its overdamped limit using timescale separation techniques. The overdamped theory is different from the naive theory that one obtains when starting from overdamped Langevin or Fokker-Planck dynamics and only coincides with it in the presence of a single reservoir. The reason is that the coarse-grained fast momentum dynamics reaches a nonequilibrium state, which conducts heat in the presence of multiple reservoirs. The underdamped and overdamped theory are both shown to satisfy fundamental fluctuation theorems. Their predictions for the heat statistics are derived analytically for a Brownian particle on a ring in contact with two reservoirs and subjected to a nonconservative force and are shown to coincide in the long-time limit.

  17. NYC Reservoirs Watershed Areas (HUC 12)

    Data.gov (United States)

    U.S. Environmental Protection Agency — This NYC Reservoirs Watershed Areas (HUC 12) GIS layer was derived from the 12-Digit National Watershed Boundary Database (WBD) at 1:24,000 for EPA Region 2 and...

  18. Origins of acid fluids in geothermal reservoirs

    Science.gov (United States)

    Truesdell, Alfred

    1991-01-01

    Acid fluids in geothermal reservoirs are rare. Their occurrence in geothermal systems associated with recent volcanism (Tatun, Sumikawa, Miravalles) probably indicates that the geothermal reservoir fluid was derived from volcanic fluid incompletely neutralized by reaction with feldspars and micas. Superheated steam containing HCl (Larderello, The Geysers) forms acid where it condenses or mixes with liquid at moderate temperatures (325??C). Cryptoacidity occurs at Los Humeros where HCl acidity is formed and neutralized without reaching the surface.

  19. Geophysical monitoring in a hydrocarbon reservoir

    Science.gov (United States)

    Caffagni, Enrico; Bokelmann, Goetz

    2016-04-01

    Extraction of hydrocarbons from reservoirs demands ever-increasing technological effort, and there is need for geophysical monitoring to better understand phenomena occurring within the reservoir. Significant deformation processes happen when man-made stimulation is performed, in combination with effects deriving from the existing natural conditions such as stress regime in situ or pre-existing fracturing. Keeping track of such changes in the reservoir is important, on one hand for improving recovery of hydrocarbons, and on the other hand to assure a safe and proper mode of operation. Monitoring becomes particularly important when hydraulic-fracturing (HF) is used, especially in the form of the much-discussed "fracking". HF is a sophisticated technique that is widely applied in low-porosity geological formations to enhance the production of natural hydrocarbons. In principle, similar HF techniques have been applied in Europe for a long time in conventional reservoirs, and they will probably be intensified in the near future; this suggests an increasing demand in technological development, also for updating and adapting the existing monitoring techniques in applied geophysics. We review currently available geophysical techniques for reservoir monitoring, which appear in the different fields of analysis in reservoirs. First, the properties of the hydrocarbon reservoir are identified; here we consider geophysical monitoring exclusively. The second step is to define the quantities that can be monitored, associated to the properties. We then describe the geophysical monitoring techniques including the oldest ones, namely those in practical usage from 40-50 years ago, and the most recent developments in technology, within distinct groups, according to the application field of analysis in reservoir. This work is performed as part of the FracRisk consortium (www.fracrisk.eu); this project, funded by the Horizon2020 research programme, aims at helping minimize the

  20. Finite temperature reservoir engineering and entanglement dynamics

    OpenAIRE

    Fedortchenko, S.; Keller, A.; Coudreau, T.; Milman, P.

    2014-01-01

    We propose experimental methods to engineer reservoirs at arbitrary temperature which are feasible with current technology. Our results generalize to mixed states the possibility of quantum state engineering through controlled decoherence. Finite temperature engineered reservoirs can lead to the experimental observation of thermal entanglement --the appearance and increase of entanglement with temperature-- to the study of the dependence of finite time disentanglement and revival with tempera...

  1. Application of integrated reservoir management and reservoir characterization to optimize infill drilling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This project has used a multi-disciplinary approach employing geology, geophysics, and engineering to conduct advanced reservoir characterization and management activities to design and implement an optimized infill drilling program at the North Robertson (Clearfork) Unit in Gaines County, Texas. The activities during the first Budget Period consisted of developing an integrated reservoir description from geological, engineering, and geostatistical studies, and using this description for reservoir flow simulation. Specific reservoir management activities were identified and tested. The geologically targeted infill drilling program currently being implemented is a result of this work. A significant contribution of this project is to demonstrate the use of cost-effective reservoir characterization and management tools that will be helpful to both independent and major operators for the optimal development of heterogeneous, low permeability shallow-shelf carbonate (SSC) reservoirs. The techniques that are outlined for the formulation of an integrated reservoir description apply to all oil and gas reservoirs, but are specifically tailored for use in the heterogeneous, low permeability carbonate reservoirs of West Texas.

  2. Massachusetts reservoir simulation tool—User’s manual

    Science.gov (United States)

    Levin, Sara B.

    2016-10-06

    IntroductionThe U.S. Geological Survey developed the Massachusetts Reservoir Simulation Tool to examine the effects of reservoirs on natural streamflows in Massachusetts by simulating the daily water balance of reservoirs. The simulation tool was developed to assist environmental managers to better manage water withdrawals in reservoirs and to preserve downstream aquatic habitats.

  3. Hydropower Reservoir Operation using Standard Operating and Standard Hedging Policies

    OpenAIRE

    T.R. Neelakantan; K. Sasireka

    2013-01-01

    Standard operating policy and hedging policies are commonly used for reservoir operation for municipal or irrigation water supply. Application of these policies to hydropower reservoir operation is complex. In this paper, new standard operating policies and standard hedging policy are proposed for hydropower reservoir operation. The newly proposed policies were applied to the operation of Indira Sagar reservoir in India and demonstrated.

  4. Reservoir assessment of The Geysers Geothermal field

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R.P.; Chapman, R.H.; Dykstra, H.

    1981-01-01

    Big Sulphur Creek fault zone, in The Geysers Geothermal field, may be part of a deep-seated, wrench-style fault system. Hydrothermal fluid in the field reservoir may rise through conduits beneath the five main anomalies associated with the Big Sulphur Creek wrench trend. Some geophysical anomalies (electrical resistivity and audio-magnetotelluric) evidently are caused by the hot water geothermal field or zones of altered rocks; others (gravity, P-wave delays, and possibly electrical resistivity) probably respresent the underlying heat source, a possible magma chamber; and others (microearthquake activity) may be related to the steam reservoir. A large negative gravity anomaly and a few low-resistivity anomalies suggest areas generally favorable for the presence of steam zones, but these anomalies apparently do not directly indicate the known steam reservoir. At the current generating capacity of 930 MWe, the estimated life of The Geysers Geothermal field reservoir is 129 years. The estimated reservoir life is 60 years for the anticipated maximum generating capacity of 2000 MWe as of 1990. Wells at The Geysers are drilled with conventional drilling fluid (mud) until the top of the steam reservoir is reached; then, they are drilled with air. Usually, mud, temperature, caliper, dual induction, and cement bond logs are run on the wells.

  5. Reservoir Thermal Recover Simulation on Parallel Computers

    Science.gov (United States)

    Li, Baoyan; Ma, Yuanle

    The rapid development of parallel computers has provided a hardware background for massive refine reservoir simulation. However, the lack of parallel reservoir simulation software has blocked the application of parallel computers on reservoir simulation. Although a variety of parallel methods have been studied and applied to black oil, compositional, and chemical model numerical simulations, there has been limited parallel software available for reservoir simulation. Especially, the parallelization study of reservoir thermal recovery simulation has not been fully carried out, because of the complexity of its models and algorithms. The authors make use of the message passing interface (MPI) standard communication library, the domain decomposition method, the block Jacobi iteration algorithm, and the dynamic memory allocation technique to parallelize their serial thermal recovery simulation software NUMSIP, which is being used in petroleum industry in China. The parallel software PNUMSIP was tested on both IBM SP2 and Dawn 1000A distributed-memory parallel computers. The experiment results show that the parallelization of I/O has great effects on the efficiency of parallel software PNUMSIP; the data communication bandwidth is also an important factor, which has an influence on software efficiency. Keywords: domain decomposition method, block Jacobi iteration algorithm, reservoir thermal recovery simulation, distributed-memory parallel computer

  6. Parallel reservoir computing using optical amplifiers.

    Science.gov (United States)

    Vandoorne, Kristof; Dambre, Joni; Verstraeten, David; Schrauwen, Benjamin; Bienstman, Peter

    2011-09-01

    Reservoir computing (RC), a computational paradigm inspired on neural systems, has become increasingly popular in recent years for solving a variety of complex recognition and classification problems. Thus far, most implementations have been software-based, limiting their speed and power efficiency. Integrated photonics offers the potential for a fast, power efficient and massively parallel hardware implementation. We have previously proposed a network of coupled semiconductor optical amplifiers as an interesting test case for such a hardware implementation. In this paper, we investigate the important design parameters and the consequences of process variations through simulations. We use an isolated word recognition task with babble noise to evaluate the performance of the photonic reservoirs with respect to traditional software reservoir implementations, which are based on leaky hyperbolic tangent functions. Our results show that the use of coherent light in a well-tuned reservoir architecture offers significant performance benefits. The most important design parameters are the delay and the phase shift in the system's physical connections. With optimized values for these parameters, coherent semiconductor optical amplifier (SOA) reservoirs can achieve better results than traditional simulated reservoirs. We also show that process variations hardly degrade the performance, but amplifier noise can be detrimental. This effect must therefore be taken into account when designing SOA-based RC implementations.

  7. Assessment of reservoir system variable forecasts

    Science.gov (United States)

    Kistenmacher, Martin; Georgakakos, Aris P.

    2015-05-01

    Forecast ensembles are a convenient means to model water resources uncertainties and to inform planning and management processes. For multipurpose reservoir systems, forecast types include (i) forecasts of upcoming inflows and (ii) forecasts of system variables and outputs such as reservoir levels, releases, flood damage risks, hydropower production, water supply withdrawals, water quality conditions, navigation opportunities, and environmental flows, among others. Forecasts of system variables and outputs are conditional on forecasted inflows as well as on specific management policies and can provide useful information for decision-making processes. Unlike inflow forecasts (in ensemble or other forms), which have been the subject of many previous studies, reservoir system variable and output forecasts are not formally assessed in water resources management theory or practice. This article addresses this gap and develops methods to rectify potential reservoir system forecast inconsistencies and improve the quality of management-relevant information provided to stakeholders and managers. The overarching conclusion is that system variable and output forecast consistency is critical for robust reservoir management and needs to be routinely assessed for any management model used to inform planning and management processes. The above are demonstrated through an application from the Sacramento-American-San Joaquin reservoir system in northern California.

  8. Potential methane reservoirs beneath Antarctica.

    Science.gov (United States)

    Wadham, J L; Arndt, S; Tulaczyk, S; Stibal, M; Tranter, M; Telling, J; Lis, G P; Lawson, E; Ridgwell, A; Dubnick, A; Sharp, M J; Anesio, A M; Butler, C E H

    2012-08-30

    Once thought to be devoid of life, the ice-covered parts of Antarctica are now known to be a reservoir of metabolically active microbial cells and organic carbon. The potential for methanogenic archaea to support the degradation of organic carbon to methane beneath the ice, however, has not yet been evaluated. Large sedimentary basins containing marine sequences up to 14 kilometres thick and an estimated 21,000 petagrams (1 Pg equals 10(15) g) of organic carbon are buried beneath the Antarctic Ice Sheet. No data exist for rates of methanogenesis in sub-Antarctic marine sediments. Here we present experimental data from other subglacial environments that demonstrate the potential for overridden organic matter beneath glacial systems to produce methane. We also numerically simulate the accumulation of methane in Antarctic sedimentary basins using an established one-dimensional hydrate model and show that pressure/temperature conditions favour methane hydrate formation down to sediment depths of about 300 metres in West Antarctica and 700 metres in East Antarctica. Our results demonstrate the potential for methane hydrate accumulation in Antarctic sedimentary basins, where the total inventory depends on rates of organic carbon degradation and conditions at the ice-sheet bed. We calculate that the sub-Antarctic hydrate inventory could be of the same order of magnitude as that of recent estimates made for Arctic permafrost. Our findings suggest that the Antarctic Ice Sheet may be a neglected but important component of the global methane budget, with the potential to act as a positive feedback on climate warming during ice-sheet wastage.

  9. A finite element simulation system in reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    Gu, Xiaozhong [Louisiana State Univ., Baton Rouge, LA (United States)

    1996-03-01

    Reservoir engineering is performed to predict the future performance of a reservoir based on its current state and past performance and to explore other methods for increasing the recovery of hydrocarbons from a reservoir. Reservoir simulations are routinely used for these purposes. A reservoir simulator is a sophisticated computer program which solves a system of partial differential equations describing multiphase fluid flow (oil, water, and gas) in a porous reservoir rock. This document describes the use of a reservoir simulator version of BOAST which was developed by the National Institute for Petroleum and Energy Research in July, 1991.

  10. Current Challenges in Geothermal Reservoir Simulation

    Science.gov (United States)

    Driesner, T.

    2016-12-01

    Geothermal reservoir simulation has long been introduced as a valuable tool for geothermal reservoir management and research. Yet, the current generation of simulation tools faces a number of severe challenges, in particular in the application for novel types of geothermal resources such as supercritical reservoirs or hydraulic stimulation. This contribution reviews a number of key problems: Representing the magmatic heat source of high enthalpy resources in simulations. Current practice is representing the deeper parts of a high enthalpy reservoir by a heat flux or temperature boundary condition. While this is sufficient for many reservoir management purposes it precludes exploring the chances of very high enthalpy resources in the deepest parts of such systems as well as the development of reliable conceptual models. Recent 2D simulations with the CSMP++ simulation platform demonstrate the potential of explicitly including the heat source, namely for understanding supercritical resources. Geometrically realistic incorporation of discrete fracture networks in simulation. A growing number of simulation tools can, in principle, handle flow and heat transport in discrete fracture networks. However, solving the governing equations and representing the physical properties are often biased by introducing strongly simplifying assumptions. Including proper fracture mechanics in complex fracture network simulations remains an open challenge. Improvements of the simulating chemical fluid-rock interaction in geothermal reservoirs. Major improvements have been made towards more stable and faster numerical solvers for multicomponent chemical fluid rock interaction. However, the underlying thermodynamic models and databases are unable to correctly address a number of important regions in temperature-pressure-composition parameter space. Namely, there is currently no thermodynamic formalism to describe relevant chemical reactions in supercritical reservoirs. Overcoming this

  11. MITIGATION OF SEDIMENTATION HAZARDS DOWNSTREAM FROM RESERVOIRS

    Institute of Scientific and Technical Information of China (English)

    Ellen WOHL; Sara RATHBURN

    2003-01-01

    Many reservoirs currently in operation trap most or all of the sediment entering the reservoir,creating sediment-depleted conditions downstream. This may cause channel adjustment in the form of bank erosion, bed erosion, substrate coarsening, and channel planform change. Channel adjustment may also result from episodic sediment releases during reservoir operation, or from sediment evacuation following dam removal. Channel adjustment to increased sediment influx depends on the magnitude, frequency, duration and grain-size distribution of the sediment releases, and on the downstream channel characteristics. Channel adjustment may occur as a change in substrate sizedistribution, filling of pools, general bed aggradation, lateral instability, change in channel planform,and/or floodplain aggradation. The increased sediment availability may alter aquatic and riparian habitat, reduce water quality, distribute adsorbed contaminants along the river corridor, and provide germination sites for exotic vegetation. Mitigation of these sedimentation hazards requires: (1)mapping grain-size distribution within the reservoir and estimating the grain-size distributions of sediment that will be mobilized through time; (2) mapping shear stress and sediment transport capacity as a function of discharge on the basis of channel units for the length of the river likely to be affected; (3) mapping potential depositional zones, and aquatic habitat and "acceptable losses," along the downstream channel, and comparing these volumes to the total sediment volume stored in the reservoir as a means of estimating total transport capacity required to mobilize reservoir sediment delivered to the channel; (4) designing discharge and sediment release regime (magnitude, frequency,duration) to minimize adverse downstream impacts; and (5) developing plans to remove, treat, contain,or track contaminants, and to restrict establishment of exotic vegetation. The North Fork Poudre River in Colorado is used to

  12. Application of integrated reservoir management and reservoir characterization to optimize infill drilling, Class II

    Energy Technology Data Exchange (ETDEWEB)

    Bergeron, Jack; Blasingame, Tom; Doublet, Louis; Kelkar, Mohan; Freeman, George; Callard, Jeff; Moore, David; Davies, David; Vessell, Richard; Pregger, Brian; Dixon, Bill; Bezant, Bryce

    2000-03-16

    The major purpose of this project was to demonstrate the use of cost effective reservoir characterization and management tools that will be helpful to both independent and major operators for the optimal development of heterogeneous, low permeability carbonate reservoirs such as the North Robertson (Clearfork) Unit.

  13. Development of Reservoir Characterization Techniques and Production Models for Exploiting Naturally Fractured Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Wiggins, Michael L.; Brown, Raymon L.; Civan, Frauk; Hughes, Richard G.

    2001-08-15

    Research continues on characterizing and modeling the behavior of naturally fractured reservoir systems. Work has progressed on developing techniques for estimating fracture properties from seismic and well log data, developing naturally fractured wellbore models, and developing a model to characterize the transfer of fluid from the matrix to the fracture system for use in the naturally fractured reservoir simulator.

  14. PLANET TOPERS: Planets, Tracing the Transfer, Origin, Preservation, and Evolution of their ReservoirS.

    Science.gov (United States)

    Dehant, V; Asael, D; Baland, R M; Baludikay, B K; Beghin, J; Belza, J; Beuthe, M; Breuer, D; Chernonozhkin, S; Claeys, Ph; Cornet, Y; Cornet, L; Coyette, A; Debaille, V; Delvigne, C; Deproost, M H; De WInter, N; Duchemin, C; El Atrassi, F; François, C; De Keyser, J; Gillmann, C; Gloesener, E; Goderis, S; Hidaka, Y; Höning, D; Huber, M; Hublet, G; Javaux, E J; Karatekin, Ö; Kodolanyi, J; Revilla, L Lobo; Maes, L; Maggiolo, R; Mattielli, N; Maurice, M; McKibbin, S; Morschhauser, A; Neumann, W; Noack, L; Pham, L B S; Pittarello, L; Plesa, A C; Rivoldini, A; Robert, S; Rosenblatt, P; Spohn, T; Storme, J -Y; Tosi, N; Trinh, A; Valdes, M; Vandaele, A C; Vanhaecke, F; Van Hoolst, T; Van Roosbroek, N; Wilquet, V; Yseboodt, M

    2016-11-01

    The Interuniversity Attraction Pole (IAP) 'PLANET TOPERS' (Planets: Tracing the Transfer, Origin, Preservation, and Evolution of their Reservoirs) addresses the fundamental understanding of the thermal and compositional evolution of the different reservoirs of planetary bodies (core, mantle, crust, atmosphere, hydrosphere, cryosphere, and space) considering interactions and feedback mechanisms. Here we present the first results after 2 years of project work.

  15. Multi-data reservoir history matching for enhanced reservoir forecasting and uncertainty quantification

    KAUST Repository

    Katterbauer, Klemens

    2015-04-01

    Reservoir simulations and history matching are critical for fine-tuning reservoir production strategies, improving understanding of the subsurface formation, and forecasting remaining reserves. Production data have long been incorporated for adjusting reservoir parameters. However, the sparse spatial sampling of this data set has posed a significant challenge for efficiently reducing uncertainty of reservoir parameters. Seismic, electromagnetic, gravity and InSAR techniques have found widespread applications in enhancing exploration for oil and gas and monitoring reservoirs. These data have however been interpreted and analyzed mostly separately, rarely exploiting the synergy effects that could result from combining them. We present a multi-data ensemble Kalman filter-based history matching framework for the simultaneous incorporation of various reservoir data such as seismic, electromagnetics, gravimetry and InSAR for best possible characterization of the reservoir formation. We apply an ensemble-based sensitivity method to evaluate the impact of each observation on the estimated reservoir parameters. Numerical experiments for different test cases demonstrate considerable matching enhancements when integrating all data sets in the history matching process. Results from the sensitivity analysis further suggest that electromagnetic data exhibit the strongest impact on the matching enhancements due to their strong differentiation between water fronts and hydrocarbons in the test cases.

  16. Reservoir Characterization, Production Characteristics, and Research Needs for Fluvial/Alluvial Reservoirs in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Cole, E.L.; Fowler, M.L.; Jackson, S.R.; Madden, M.P.; Raw-Schatzinger, V.; Salamy, S.P.; Sarathi, P.; Young, M.A.

    1999-04-28

    The Department of Energy's (DOE's) Oil Recovery Field Demonstration Program was initiated in 1992 to maximize the economically and environmentally sound recovery of oil from known domestic reservoirs and to preserve access to this resource. Cost-shared field demonstration projects are being initiated in geology defined reservoir classes which have been prioritized by their potential for incremental recovery and their risk of abandonment. This document defines the characteristics of the fifth geological reservoir class in the series, fluvial/alluvial reservoirs. The reservoirs of Class 5 include deposits of alluvial fans, braided streams, and meandering streams. Deposit morphologies vary as a complex function of climate and tectonics and are characterized by a high degree of heterogeneity to fluid flow as a result of extreme variations in water energy as the deposits formed.

  17. Reservoir engineering technology used for geothermal reservoir assessment studies in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, H. [ISTec, Inst. fuer Sicherheitstechnologie, Koeln (Germany); Pusch, G. [Inst. fuer Erdoel- und Erdgastechnik, TU Clausthal (Germany)

    2006-07-01

    The development of the geothermal reservoirs needs and uses the know-how and technology of petroleum reservoir engineering. The interaction of both disciplines is due to the similarities of underground geothermal systems to the oil and gas reservoirs. Because of the its earlier development, petroleum engineering concepts and technologies play an important role in geothermal field developments worldwide since many years. In Germany good examples of this interaction is also seen in the last years especially in exploration and development stages. The assessment of the defined heat reserves needs also to profit from the reservoir assessment and management techniques and technologies of petroleum engineering. Especially modelling of all production stages, from the near wellbore in the reservoir, to the surface could be examined based on the know-how and developed tools of the petroleum industry.

  18. Seismic imaging of reservoir flow properties: Resolving waterinflux and reservoir permeability

    Energy Technology Data Exchange (ETDEWEB)

    Vasco, D.W.; Keers, Henk

    2006-11-27

    Methods for geophysical model assessment, in particuale thecomputation of model parameter resolution, indicate the value and thelimitations of time-lapse data in estimating reservoir flow properties. Atrajectory-based method for computing sensitivities provides an effectivemeans to compute model parameter resolutions. We examine the commonsituation in which water encroaches into a resrvoir from below, as due tothe upward movement of an oil-water contact. Using straight-forwardtechniques we find that, by inclusing reflections off the top and bottomof a reservoir tens of meters thick, we can infer reservoir permeabilitybased upon time-lapse data. We find that, for the caseof water influxfrom below, using multiple time-lapse 'snapshots' does not necessarilyimprove the resolution of reservoir permeability. An application totime-lapse data from the Norne field illustrates that we can resolve thepermeability near a producing well using reflections from threeinterfaces associated with the reservoir.

  19. Connectivity of channelized reservoirs: a modelling approach

    Energy Technology Data Exchange (ETDEWEB)

    Larue, David K. [ChevronTexaco, Bakersfield, CA (United States); Hovadik, Joseph [ChevronTexaco, San Ramon, CA (United States)

    2006-07-01

    Connectivity represents one of the fundamental properties of a reservoir that directly affects recovery. If a portion of the reservoir is not connected to a well, it cannot be drained. Geobody or sandbody connectivity is defined as the percentage of the reservoir that is connected, and reservoir connectivity is defined as the percentage of the reservoir that is connected to wells. Previous studies have mostly considered mathematical, physical and engineering aspects of connectivity. In the current study, the stratigraphy of connectivity is characterized using simple, 3D geostatistical models. Based on these modelling studies, stratigraphic connectivity is good, usually greater than 90%, if the net: gross ratio, or sand fraction, is greater than about 30%. At net: gross values less than 30%, there is a rapid diminishment of connectivity as a function of net: gross. This behaviour between net: gross and connectivity defines a characteristic 'S-curve', in which the connectivity is high for net: gross values above 30%, then diminishes rapidly and approaches 0. Well configuration factors that can influence reservoir connectivity are well density, well orientation (vertical or horizontal; horizontal parallel to channels or perpendicular) and length of completion zones. Reservoir connectivity as a function of net: gross can be improved by several factors: presence of overbank sandy facies, deposition of channels in a channel belt, deposition of channels with high width/thickness ratios, and deposition of channels during variable floodplain aggradation rates. Connectivity can be reduced substantially in two-dimensional reservoirs, in map view or in cross-section, by volume support effects and by stratigraphic heterogeneities. It is well known that in two dimensions, the cascade zone for the 'S-curve' of net: gross plotted against connectivity occurs at about 60% net: gross. Generalizing this knowledge, any time that a reservoir can be regarded as &apos

  20. Physical modelling of the Akkajaure reservoir

    Directory of Open Access Journals (Sweden)

    J. Sahlberg

    2003-01-01

    Full Text Available This paper describes the seasonal temperature development in the Akkajaure reservoir, one of the largest Swedish reservoirs. It lies in the headwaters of the river Lulealven in northern Sweden; it is 60 km long and 5 km wide with a maximum depth of 92 m. The maximum allowed variation in surface water level is 30 m. The temperature field in the reservoir is important for many biochemical processes. A one-dimensional lake model of the Akkajaure reservoir is developed from a lake model by Sahlberg (1983 and 1988. The dynamic eddy viscosity is calculated by a two equation turbulence model, a k–ε model and the hypolimnic eddy diffusivity formulation which is a function of the stability frequency (Hondzo et al., 1993. A comparison between calculated and measured temperature profiles showed a maximum discrepancy of 0.5–1.0°C over the period 1999-2002. Except for a few days in summer, the water temperature is vertically homogeneous. Over that period of years, a weak stratification of temperature occurred on only one to two weeks a year on different dates in July and August. This will have biological consequences. Keywords: temperature profile,reservoir, 1-D lake model, stratification, Sweden

  1. Mechanisms of HIV persistence in HIV reservoirs.

    Science.gov (United States)

    Mzingwane, Mayibongwe L; Tiemessen, Caroline T

    2017-03-01

    The establishment and maintenance of HIV reservoirs that lead to persistent viremia in patients on antiretroviral drugs remains the greatest challenge of the highly active antiretroviral therapy era. Cellular reservoirs include resting memory CD4+ T lymphocytes, implicated as the major HIV reservoir, having a half-life of approximately 44 months while this is less than 6 hours for HIV in plasma. In some individuals, persistent viremia consists of invariant HIV clones not detected in circulating resting CD4+ T lymphocytes suggesting other possible sources of residual viremia. Some anatomical reservoirs that may harbor such cells include the brain and the central nervous system, the gastrointestinal tract and the gut-associated lymphoid tissue and other lymphoid organs, and the genital tract. The presence of immune cells and other HIV susceptible cells, occurring in differing compositions in anatomical reservoirs, coupled with variable and poor drug penetration that results in suboptimal drug concentrations in some sites, are all likely factors that fuel the continued low-level replication and persistent viremia during treatment. Latently, HIV-infected CD4+ T cells harboring replication-competent virus, HIV cell-to-cell spread, and HIV-infected T cell homeostatic proliferation due to chronic immune activation represent further drivers of this persistent HIV viremia during highly active antiretroviral therapy. Copyright © 2017 John Wiley & Sons, Ltd.

  2. Mercury and methylmercury in reservoirs in Indiana

    Science.gov (United States)

    Risch, Martin R.; Fredericksen, Amanda L.

    2015-01-01

    Mercury (Hg) is an element that occurs naturally, but evidence suggests that human activities have resulted in increased amounts being released to the atmosphere and land surface. When Hg is converted to methylmercury (MeHg) in aquatic ecosystems, MeHg accumulates and increases in the food web so that some fish contain levels which pose a health risk to humans and wildlife that consume these fish. Reservoirs unlike natural lakes, are a part of river systems that are managed for flood control. Data compiled and interpreted for six flood-control reservoirs in Indiana showed a relation between Hg transport, MeHg formation in water, and MeHg in fish that was influenced by physical, chemical, and biological differences among the reservoirs. Existing information precludes a uniform comparison of Hg and MeHg in all reservoirs in the State, but factors and conditions were identified that can indicate where and when Hg and MeHg levels in reservoirs could be highest.

  3. Tracing fluid flow in geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Rose, P.E.; Adams, M.C. [Univ. of Utah, Salt Lake City, UT (United States)

    1997-12-31

    A family of fluorescent compounds, the polycyclic aromatic sulfonates, were evaluated for application in intermediate- and high-temperature geothermal reservoirs. Whereas the naphthalene sulfonates were found to be very thermally stable and reasonably detectable, the amino-substituted naphthalene sulfonates were found to be somewhat less thermally stable, but much more detectable. A tracer test was conducted at the Dixie Valley, Nevada, geothermal reservoir using one of the substituted naphthalene sulfonates, amino G, and fluorescein. Four of 9 production wells showed tracer breakthrough during the first 200 days of the test. Reconstructed tracer return curves are presented that correct for the thermal decay of tracer assuming an average reservoir temperature of 227{degrees}C. In order to examine the feasibility of using numerical simulation to model tracer flow, we developed simple, two-dimensional models of the geothermal reservoir using the numerical simulation programs TETRAD and TOUGH2. By fitting model outputs to measured return curves, we show that numerical reservoir simulations can be calibrated with the tracer data. Both models predict the same order of elution, approximate tracer concentrations, and return curve shapes. Using these results, we propose a method for using numerical models to design a tracer test.

  4. Optimized recovery through cooperative geology and reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    Craig, F.F. Jr.; Willcox, P.J.; Ballard, J.R.; Nation, W.R.

    1976-01-01

    Reservoir engineers have always used geological descriptions in their performance calculations. At first, the only information that could be utilized consisted of gross factors such as structure, thickness, fault and boundary locations, and the like, and average values for permeability, porosity, and fluid saturations. The advent of easy-to-use, relatively inexpensive mathematical models provided a new and powerful tool to the reservoir engineer for predicting performance. However, this tool required for its optimum use a more detailed reservoir description than geologists were accustomed to providing. Today's reservoir engineer utilizes the most detailed geological information along with a reservoir performance simulator to synthesize a detailed reservoir description capable of matching actual field performance data. Use of such a reservoir description permits the design of operating programs to obtain optimized recovery from hydrocarbon reservoirs. Two examples of the use of this combined geology-reservoir engineering technique are taken from the international arena of operations.

  5. Well testing of tight gas reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Jahanbani, A.; Aguilera, R. [Calgary Univ., AB (Canada)

    2008-07-01

    This paper discussed methods of evaluating tight gas sand reservoirs. Conventional well testing is not used in tight gas reservoirs due to their low permeability. Tight gas well testing techniques include pressure-dependent permeability testing; the estimation of pseudo--time at the average pressure of the region of influence; and supercharge effect testing. Pre-frac test analysis techniques were also discussed. Pressure-transient test designs were reviewed along with instantaneous source response methods for calculating influence functions. Impulse-fracture tests were discussed, as well as perforation inflow diagnostic testing. Perforation inflow tests provided reasonable estimates of reservoir parameters. Methods of determining pressure-dependent permeability data were discussed. After closure analysis (ACA) was used to analyze formation permeability. It was concluded that ACA can be coupled with pre-closure analysis to optimize fracture stimulation plans. The 22 refs., 17 figs.

  6. Transmissibility scale-up in reservoir simulation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, W.; Gupta, A. [Oklahoma Univ., Oklahoma City, OK (United States)

    1999-11-01

    A study was conducted to develop efficient methods for scaling of petrophysical properties from high resolution geological models to the resolution of reservoir simulation. Data from the Gypsy Field located in northeastern Oklahoma near Lake Keystone was used to evaluate the proposed method. The petrophysical property which was scaled in this study was the transmissibility between two grid blocks. A linear flow scale-up of the transmissibility between two grid blocks was conducted. It was determined that the scale-up of the productivity index is both important and necessary for determining the radial flow around the wellbore. Special consideration was needed for the pinch-out grid blocks in the system. Fine-scale and coarse-scale reservoir models were used to evaluate the feasibility of this proposed method. Performance predictions were compared with various reservoir flow case studies. 21 refs., 2 tabs., 20 figs.

  7. Acid gas injection : reservoir engineering considerations

    Energy Technology Data Exchange (ETDEWEB)

    Pooladi-Darvish, M. [Fekete Associates Inc., Calgary, AB (Canada); Calgary Univ., AB (Canada)

    2009-07-01

    This study discussed reservoir engineering considerations related to acid gas injection, including the effects of pressure. A map of acid gas injection sites in Alberta was presented. The WASP Nisku acid gas project is a carbon dioxide (CO{sub 2}) sequestration project located in a dolomitized aquifer close to coal-fired power plants. Analytical solutions developed at the site include a multi-well injectivity procedure for infinite reservoirs. Analytical considerations at the site included low water compressibility, strong interference, and a lack of flow boundaries. Chromatographic separation techniques were used to address the compositional effects of the reservoir in relation to the injection wells. Techniques developed at the CO{sub 2} sequestration sites are being used to develop procedures for acid gas storage in depleted gas pools and beneath the ocean floor. tabs., figs.

  8. Landfill liners from dam reservoir sediments

    Directory of Open Access Journals (Sweden)

    Koś Karolina

    2016-03-01

    Full Text Available Landfill liners from dam reservoir sediments. Every municipal solid waste landfill has to be properly secured to protect the natural environment from possible leachate. Most often an artificial sealing is used, which is based on a soil liner from cohesive soils (clays, silts. Usability evaluation of bottom sediments from Rzeszowski Reservoir for building these liners was presented in the paper. Sediments from dam reservoirs, gathered as a result of the siltation process, can be a valuable material for earthworks purposes. Determination of their possible ways of usage is important, especially before the planned dredging, because thanks to that this material will not be put on a heap. Based on the analysis of the geotechnical parameters of these sediments it was stated that this material can be preliminary allowed for using in liners.

  9. Second workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.; Ramey, H.J. Jr. (eds.)

    1976-12-03

    The Arab oil embargo of 1973 focused national attention on energy problems. A national focus on development of energy sources alternative to consumption of hydrocarbons led to the initiation of research studies of reservoir engineering of geothermal systems, funded by the National Science Foundation. At that time it appeared that only two significant reservoir engineering studies of geothermal reservoirs had been completed. Many meetings concerning development of geothermal resources were held from 1973 through the date of the first Stanford Geothermal Reservoir Engineering workshop December 15-17, 1975. These meetings were similar in that many reports dealt with the objectives of planned research projects rather than with results. The first reservoir engineering workshop held under the Stanford Geothermal Program was singular in that for the first time most participants were reporting on progress inactive research programs rather than on work planned. This was true for both laboratory experimental studies and for field experiments in producing geothermal systems. The Proceedings of the December 1975 workshop (SGP-TR-12) is a remarkable document in that results of both field operations and laboratory studies were freely presented and exchanged by all participants. With this in mind the second reservoir engineering workshop was planned for December 1976. The objectives were again two-fold. First, the workshop was designed as a forum to bring together researchers active in various physical and mathematical branches of the developing field of geothermal reservoir engineering, to give participants a current and updated view of progress being made in the field. The second purpose was to prepare this Proceedings of Summaries documenting the state of the art as of December 1976. The proceedings will be distributed to all interested members of the geothermal community involved in the development and utilization of the geothermal resources in the world. Many notable

  10. Reservoir characterization and enhanced oil recovery research

    Energy Technology Data Exchange (ETDEWEB)

    Lake, L.W.; Pope, G.A.; Schechter, R.S.

    1992-03-01

    The research in this annual report falls into three tasks each dealing with a different aspect of enhanced oil recovery. The first task strives to develop procedures for accurately modeling reservoirs for use as input to numerical simulation flow models. This action describes how we have used a detail characterization of an outcrop to provide insights into what features are important to fluid flow modeling. The second task deals with scaling-up and modeling chemical and solvent EOR processes. In a sense this task is the natural extension of task 1 and, in fact, one of the subtasks uses many of the same statistical procedures for insight into the effects of viscous fingering and heterogeneity. The final task involves surfactants and their interactions with carbon dioxide and reservoir minerals. This research deals primarily with phenomena observed when aqueous surfactant solutions are injected into oil reservoirs.

  11. Mechanical Testing Development for Reservoir Forgings

    Energy Technology Data Exchange (ETDEWEB)

    Wenski, E.G.

    2000-05-22

    The goal of this project was to determine the machining techniques and testing capabilities required for mechanical property evaluation of commercially procured reservoir forgings. Due to the small size of these specific forgings, specialized methods are required to adequately machine and test these sub-miniature samples in accordance with the requirements of ASTM-E8 and ASTM-E9. At the time of project initiation, no capability existed at Federal Manufacturing & Technologies (FM&T) to verify the physical properties of these reservoirs as required on the drawing specifications. The project determined the sample definitions, machining processes, and testing procedures to verify the physical properties of the reservoir forgings; specifically, tensile strength, yield strength, reduction of area, and elongation. In addition, a compression test method was also developed to minimize sample preparation time and provide a more easily machined test sample while maintaining the physical validation of the forging.

  12. Reservoir rehabilitations: Seeking the Fountain of Youth

    Science.gov (United States)

    Pegg, Mark A.; Pope, Kevin L.; Powell, L.A.; Turek, Kelly C.; Spurgeon, Jonathan J.; Stewart, Nathaniel T.; Hogberg, Nick P.; Porath, Mark T.

    2017-01-01

    Aging of reservoirs alters the functions, and associated services, of these systems through time. The goal of habitat rehabilitation is often to alter the trajectory of the aging process such that the duration of the desired state is prolonged. There are two important characteristics in alteration of the trajectory—the amplitude relative to current state and the subsequent rate of change, or aging—that ultimately determine the duration of extension for the desired state. Rehabilitation processes largely fall into three main categories: fish community manipulation, water quality manipulation, and physical habitat manipulation. We can slow aging of reservoirs through carefully implemented management actions, perhaps even turning back the hands of time, but we cannot stop aging. We call for new, innovative perspectives that incorporate an understanding of aging processes in all steps of rehabilitation of reservoirs, especially in planning and assessing.

  13. A MATHEMATICAL MODEL OF RESERVOIR SEDIMENTATION

    Institute of Scientific and Technical Information of China (English)

    HUANG Jinchi

    2001-01-01

    Reliable quantitative estimation of bed aggradation or degradation is important for river-training and water management projects. With the development of water resources, sediment problems associated with a dam are becoming more severe. This paper describes some special problems in mathematical model for calculation of degradation and aggradation in a reservoir. The main efforts of this study are on the treatment of some physical processes of fine sediment transport (<0.05 mm). Problems in a reservoir are obviously different from a natural stream, such as the turbid current flow, orifice sediment flushing;and the initiation and consolidation of cohesive sediment deposition. The case of Liujiaxia Reservoir,which is located in the upper reaches of the Yellow River, is employed to verify the model. The results show that the model is applicable in the evaluation of an engineering planing with plenty of fine sediment movement.

  14. The role of petroleum engineering on geothermal reservoir assessments

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, H. [ISTec, Koeln (Germany)

    2008-02-15

    Reservoir assessment is the most critical issue of the risk analysis on the use of a geothermal energy source and requires a multi disciplinary survey of the underground objective. Petroleum reservoir engineering with its methodology and its actual technology level fits well with the needs of geothermal reservoir assessments. In this study similarities and differences of the hydrocarbon and geothermal reservoirs are discussed briefly in terms of exploration and production. Furthermore the petroleum reservoir engineering techniques which are currently used and which can be used in geothermal reservoir assessments are summarized. (orig.)

  15. Characterization of oil and gas reservoir heterogeneity

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The objective of the cooperative research program is to characterize Alaskan reservoirs in terms of their reserves, physical and chemical properties, geologic configuration and structure, and the development potential. The tasks completed during this period include: (1) geologic reservoir description of Endicott Field; (2) petrographic characterization of core samples taken from selected stratigraphic horizons of the West Sak and Ugnu (Brookian) wells; (3) development of a polydispersed thermodynamic model for predicting asphaltene equilibria and asphaltene precipitation from crude oil-solvent mixtures, and (4) preliminary geologic description of the Milne Point Unit.

  16. On the simulation of heterogeneous petroleum reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Daripa, P.; Glimm, J.; Lindquist, B.; Maesumi, M.; McBryan, O.

    1987-04-01

    The authors and coworkers have proposed the front tracking method as useful in applications to petroleum reservoir simulation. A variety of tests of a numerical analysis nature were performed for the method, verifying convergence under mesh refinement and absence of mesh orientation effects. The ability to handle complex interface bifurcation, fingering instabilities and polymer injection (as an example of tertiary oil recovery) indicates a level of robustness in this method. The main purpose of this paper is to report on two features which will allow further series of tests by enabling a more realistic description of reservoir heterogeneities. 29 refs., 4 figs.

  17. NMPC for Oil Reservoir Production Optimization

    DEFF Research Database (Denmark)

    Völcker, Carsten; Jørgensen, John Bagterp; Thomsen, Per Grove

    2011-01-01

    In this paper, we use nonlinear model predictive control (NMPC) to maximize secondary oil recovery from an oil reservoir by controlling two-phase subsurface porous flow using adjustable down-hole control valves. The resulting optimal control problem is nonlinear and large-scale. We solve this pro......In this paper, we use nonlinear model predictive control (NMPC) to maximize secondary oil recovery from an oil reservoir by controlling two-phase subsurface porous flow using adjustable down-hole control valves. The resulting optimal control problem is nonlinear and large-scale. We solve...

  18. RESERVOIR CAPACITY DEPLETION ON ACCOUNT OF SEDIMENTATION

    Institute of Scientific and Technical Information of China (English)

    Prabhata K.SWAMEE

    2001-01-01

    Capacity depletion is an important information required for planning of multipurpose reservoirs. It is a complex phenomenon involving diverse fields like surface hydrology, sediment transport, varied flow hydraulics and soil consolidation. Proper assessment of capacity reduction is helpful in ascertaining the life of the reservoir and the project benefits for cost/benefit analysis. In this study dimensionally consistent equations for deposition volume and the trap efficiency have been obtained. Methods of obtaining the parameters involved these equations have also been indicated. It was found that there is good agreement with the field data. It is hoped that the equations are useful to design engineer.

  19. Reservoir characteristics and genesis of high-porosity and high-permeability reservoirs in Tarim Basin

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Based on detailed studies, this paper proposes that in the Tarim Basin, hydrocarbon reservoirs widespread either in vertical sequences or in plane and high-porosity and high-permeability reservoirs are developed all over the basin. However, obvious difference and heterogeneity exist among different kinds of reservoirs. The lithologic characteristics, reservoir space types and reservoir properties in various strata have been probed. The result indicates that although the Paleozoic carbonates have been deeply buried for a long period, high-quality reservoirs with the porosity of up to 5%-8% (12% as the maximum) and the permeability of 10×10?3-100×10?3 ?m2 (1000×10?3 ?m2 as the maximum) can be found in certain areas. These include the area with the development of reefs and carbonate beaches, the weathered-crust buried-hill belts that have undergone the long-term exposure, weathering and leaching, the area with the development of dolomitization, and those areas that have experienced the resolution of carbonic acid and organic acid generated by the maturity of the organic matter. Finally, the genesis of the high-porosity and high-permeability reservoirs in deep-buried conditions (with the depth more than 3500 m) have been investigated thoroughly.

  20. Simulation of Reservoir Sediment Flushing of the Three Gorges Reservoir Using an Artificial Neural Network

    Directory of Open Access Journals (Sweden)

    Xueying Li

    2016-05-01

    Full Text Available Reservoir sedimentation and its effect on the environment are the most serious world-wide problems in water resources development and utilization today. As one of the largest water conservancy projects, the Three Gorges Reservoir (TGR has been controversial since its demonstration period, and sedimentation is the major concern. Due to the complex physical mechanisms of water and sediment transport, this study adopts the Error Back Propagation Training Artificial Neural Network (BP-ANN to analyze the relationship between the sediment flushing efficiency of the TGR and its influencing factors. The factors are determined by the analysis on 1D unsteady flow and sediment mathematical model, mainly including reservoir inflow, incoming sediment concentration, reservoir water level, and reservoir release. Considering the distinguishing features of reservoir sediment delivery in different seasons, the monthly average data from 2003, when the TGR was put into operation, to 2011 are used to train, validate, and test the BP-ANN model. The results indicate that, although the sample space is quite limited, the whole sediment delivery process can be schematized by the established BP-ANN model, which can be used to help sediment flushing and thus decrease the reservoir sedimentation.

  1. Improved characterization of reservoir behavior by integration of reservoir performances data and rock type distributions

    Energy Technology Data Exchange (ETDEWEB)

    Davies, D.K.; Vessell, R.K. [David K. Davies & Associates, Kingwood, TX (United States); Doublet, L.E. [Texas A& M Univ., College Station, TX (United States)] [and others

    1997-08-01

    An integrated geological/petrophysical and reservoir engineering study was performed for a large, mature waterflood project (>250 wells, {approximately}80% water cut) at the North Robertson (Clear Fork) Unit, Gaines County, Texas. The primary goal of the study was to develop an integrated reservoir description for {open_quotes}targeted{close_quotes} (economic) 10-acre (4-hectare) infill drilling and future recovery operations in a low permeability, carbonate (dolomite) reservoir. Integration of the results from geological/petrophysical studies and reservoir performance analyses provide a rapid and effective method for developing a comprehensive reservoir description. This reservoir description can be used for reservoir flow simulation, performance prediction, infill targeting, waterflood management, and for optimizing well developments (patterns, completions, and stimulations). The following analyses were performed as part of this study: (1) Geological/petrophysical analyses: (core and well log data) - {open_quotes}Rock typing{close_quotes} based on qualitative and quantitative visualization of pore-scale features. Reservoir layering based on {open_quotes}rock typing {close_quotes} and hydraulic flow units. Development of a {open_quotes}core-log{close_quotes} model to estimate permeability using porosity and other properties derived from well logs. The core-log model is based on {open_quotes}rock types.{close_quotes} (2) Engineering analyses: (production and injection history, well tests) Material balance decline type curve analyses to estimate total reservoir volume, formation flow characteristics (flow capacity, skin factor, and fracture half-length), and indications of well/boundary interference. Estimated ultimate recovery analyses to yield movable oil (or injectable water) volumes, as well as indications of well and boundary interference.

  2. Reservoir-forming age and its exploration significance to stratigraphic reservoirs in southern Songliao Basin

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Despite many studies concerning the forming age, evolution characteristics and the age of petroleum charging in the Fuxin upheaval of southern Songliao Basin, no consensus has been reached so far. This paper presents the first K-Ar dating of autogenetic illite from stratigraphic petroleum reservoirs in the Fuyu oil layer of the Fuxin upheaval belt. Isotopic test and age calculation were carried out based on the separation and purification of illite mineral, X-diffraction analysis and the detection of scanning electron microscopy. The evolution characteristics of structure, sedimentation, reservoir-forming about the Fuxin upheaval belt were interpreted in terms of the synthetical analysis of "six-type geological history" evolution in southern Songliao Basin. The geologic background of petroleum evolution and reservoir formation are similar in the entire central depression region of southern Songliao Basin. The Changling sag and the Fuxin upheaval belt brought about obvious upheaval-sag separation after the hydrocarbon-generation peak of K2qn1 and the main reservoir-forming period of the Fuyu oil layer, namely reservoir-forming happened before the Fuxin upheaval belt extensively raised. The reservoirs have three characteristics: the hydrocarbon source rock above the reservoir, the oil source in the locality, and the vertical migration. The geological cognition is corrected, that is, oil source came from the Changling sag and migrated from the side direction. The bulk process of petroleum charging in the stratigraphic hydrocarbon reservoirs in the Fuxin upheaval belt of southern Songliao Basin is determined according to the isotopic age of autogenetic illite in combination with the method of fluid inclusions. The cognition is helpful to exactly evaluate the resource potential and exploration direction in the Fuxin upheaval belt, Changling sag and their peripheral areas. The present results indicate that the combination of the two methods (the K-Ar dating of

  3. INCREASING WATERFLOOD RESERVES IN THE WILMINGTON OIL FIELD THROUGH IMPROVED RESERVOIR CHARACTERIZATION AND RESERVOIR MANAGEMENT

    Energy Technology Data Exchange (ETDEWEB)

    Scott Walker; Chris Phillips; Roy Koerner; Don Clarke; Dan Moos; Kwasi Tagbor

    2002-02-28

    This project increased recoverable waterflood reserves in slope and basin reservoirs through improved reservoir characterization and reservoir management. The particular application of this project is in portions of Fault Blocks IV and V of the Wilmington Oil Field, in Long Beach, California, but the approach is widely applicable in slope and basin reservoirs. Transferring technology so that it can be applied in other sections of the Wilmington Field and by operators in other slope and basin reservoirs is a primary component of the project. This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate. Although these reservoirs have been waterflooded over 40 years, researchers have found areas of remaining oil saturation. Areas such as the top sand in the Upper Terminal Zone Fault Block V, the western fault slivers of Upper Terminal Zone Fault Block V, the bottom sands of the Tar Zone Fault Block V, and the eastern edge of Fault Block IV in both the Upper Terminal and Lower Terminal Zones all show significant remaining oil saturation. Each area of interest was uncovered emphasizing a different type of reservoir characterization technique or practice. This was not the original strategy but was necessitated by the different levels of progress in each of the project activities.

  4. DEVELOPMENT OF RESERVOIR CHARACTERIZATION TECHNIQUES AND PRODUCTION MODELS FOR EXPLOITING NATURALLY FRACTURED RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Wiggins; Raymon L. Brown; Faruk Civan; Richard G. Hughes

    2002-12-31

    For many years, geoscientists and engineers have undertaken research to characterize naturally fractured reservoirs. Geoscientists have focused on understanding the process of fracturing and the subsequent measurement and description of fracture characteristics. Engineers have concentrated on the fluid flow behavior in the fracture-porous media system and the development of models to predict the hydrocarbon production from these complex systems. This research attempts to integrate these two complementary views to develop a quantitative reservoir characterization methodology and flow performance model for naturally fractured reservoirs. The research has focused on estimating naturally fractured reservoir properties from seismic data, predicting fracture characteristics from well logs, and developing a naturally fractured reservoir simulator. It is important to develop techniques that can be applied to estimate the important parameters in predicting the performance of naturally fractured reservoirs. This project proposes a method to relate seismic properties to the elastic compliance and permeability of the reservoir based upon a sugar cube model. In addition, methods are presented to use conventional well logs to estimate localized fracture information for reservoir characterization purposes. The ability to estimate fracture information from conventional well logs is very important in older wells where data are often limited. Finally, a desktop naturally fractured reservoir simulator has been developed for the purpose of predicting the performance of these complex reservoirs. The simulator incorporates vertical and horizontal wellbore models, methods to handle matrix to fracture fluid transfer, and fracture permeability tensors. This research project has developed methods to characterize and study the performance of naturally fractured reservoirs that integrate geoscience and engineering data. This is an important step in developing exploitation strategies for

  5. SEISMIC DETERMINATION OF RESERVOIR HETEROGENEITY; APPLICATION TO THE CHARACTERIZATION OF HEAVY OIL RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Matthias G. Imhof; James W. Castle

    2003-11-01

    The objective of the project is to examine how seismic and geologic data can be used to improve characterization of small-scale heterogeneity and their parameterization in reservoir models. The study is performed at West Coalinga Field in California. We continued our investigation on the nature of seismic reactions from heterogeneous reservoirs. We began testing our algorithm to infer parameters of object-based reservoir models from seismic data. We began integration of seismic and geologic data to determine the deterministic limits of conventional seismic data interpretation. Lastly, we began integration of seismic and geologic heterogeneity using stochastic models conditioned both on wireline and seismic data.

  6. Evaluation of Planning for Fish and Wildlife at Corps of Engineers Reservoirs, Allegheny Reservoir Project, Pennsylvania.

    Science.gov (United States)

    1982-09-01

    I *~ -* .t4 000 Uin.~, P~n 0* .5 0 05 ~ @ftft’~% MO 0.u I- a * - j *SSES -~ M -- - * 𔃺 0 .1 I A S 4% * Ag U .2 - ~SMU cnn ftS44% -o -. 𔃺ft 4%0𔃺 M0M...Longnead darter , A Pearl dace, A Blackside darter, A Slenderkeed dartw. A Catostomidae Malley*, A, R Qutll ck, A, R White sucker, A, 4 Cettid...reservoirs and incorporating data such as morpho- metry, water chemistry, and reservoir age , the Alle- gheny Reservoir should now have an annual sport fishing

  7. Studies of Reservoir Hosts for Marburg virus

    DEFF Research Database (Denmark)

    Swanepoel, Robert; Smit, Sheilagh B; Rollin, Pierre E

    2007-01-01

    To determine reservoir hosts for Marburg virus (MARV), we examined the fauna of a mine in northeastern Democratic Republic of the Congo. The mine was associated with a protracted outbreak of Marburg hemorrhagic fever during 1998-2000. We found MARV nucleic acid in 12 bats, comprising 3.0%-3.6% of 2...

  8. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-12-31

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  9. Borehole radar modeling for reservoir monitoring applications

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2010-01-01

    The use of down-hole sensors and remotely controlled valves in wells provide enormous benefits to reservoir management and oil production. We suggest borehole radar measurements as a promising technique capable of monitoring the arrival of undesired fluids in the proximity of production wells. The h

  10. Fourteenth workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1989-01-01

    The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

  11. Borehole radar modeling for reservoir monitoring applications

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2010-01-01

    The use of down-hole sensors and remotely controlled valves in wells provide enormous benefits to reservoir management and oil production. We suggest borehole radar measurements as a promising technique capable of monitoring the arrival of undesired fluids in the proximity of production wells. The

  12. Adsorption of hydrocarbons in chalk reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Madsen, L.

    1996-12-31

    The present work is a study on the wettability of hydrocarbon bearing chalk reservoirs. Wettability is a major factor that influences flow, location and distribution of oil and water in the reservoir. The wettability of the hydrocarbon reservoirs depends on how and to what extent the organic compounds are adsorbed onto the surfaces of calcite, quartz and clay. Organic compounds such as carboxylic acids are found in formation waters from various hydrocarbon reservoirs and in crude oils. In the present investigation the wetting behaviour of chalk is studied by the adsorption of the carboxylic acids onto synthetic calcite, kaolinite, quartz, {alpha}-alumina, and chalk dispersed in an aqueous phase and an organic phase. In the aqueous phase the results clearly demonstrate the differences between the adsorption behaviour of benzoic acid and hexanoic acid onto the surfaces of oxide minerals and carbonates. With NaCl concentration of 0.1 M and with pH {approx_equal} 6 the maximum adsorption of benzoic acid decreases in the order: quartz, {alpha}-alumina, kaolinite. For synthetic calcite and chalk no detectable adsorption was obtaind. In the organic phase the order is reversed. The maximum adsorption of benzoic acid onto the different surfaces decreases in the order: synthetic calcite, chalk, kaolinite and quartz. Also a marked difference in adsorption behaviour between probes with different functional groups onto synthetic calcite from organic phase is observed. The maximum adsorption decreases in the order: benzoic acid, benzyl alcohol and benzylamine. (au) 54 refs.

  13. Geothermal Reservoirs: Products of Cooling Plutons

    Energy Technology Data Exchange (ETDEWEB)

    Denis L. Norton

    2002-09-24

    The goals of this project were to develop an in depth understanding of how geothermal reservoirs form and elucidate those features that could potentially be useful in exploration and development of additional energy reserves. Collaboration with Jeff Hulen, EGI helped closely coordinate theoretical concepts and computational experiments with geologic reality in fulfillment of the tasks for this project. Initial reconnaissance computations with Tom Brikowski, University of Texas were critical in realizing the final products of this project. The products of this work contribute basic understanding of the dynamical conditions attendant to the formation of reservoirs in general and the Geysers reservoir in particular. The most exciting of the discoveries were a combination of mineralogical, computational, and geothermometric data sets that revealed a chaotic-like behavior of the processes is critical in the formation of reservoirs near cooling plutions. This discovery provides a fundamental basis for improving resource assessment and exploration methods for geothermal energy associated with very young magmas. Some of the main results are documented in scientific publications, and DOE progress reports. An additional publication is in preparation on the overall significance of fracture propagation and microseismic activity around young magmas.

  14. Fifteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    The Fifteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23--25, 1990. Major topics included: DOE's geothermal research and development program, well testing, field studies, geosciences, geysers, reinjection, tracers, geochemistry, and modeling.

  15. Freshwater reservoir effect variability in Northern Germany

    DEFF Research Database (Denmark)

    Philippsen, Bente; Heinemeier, Jan

    2012-01-01

    Kayhude at the river Alster and Schlamersdorf at the river Trave, both in Schleswig-Holstein, Northern Germany. Measurements on modern materials from these rivers may not give a single reservoir age correction that can be applied to archaeological samples, but they will show the order of magnitude...

  16. Modeling Transport of Flushed Reservoir Sediment

    Science.gov (United States)

    Dubinski, I. M.

    2014-12-01

    Drawdown flushing of a reservoir is often part of a reservoir sediment management program. Flushing can deliver higher than normal sediment loads to the river channel located downstream of a reservoir. The flushed sediment may contain a higher proportion of finer sediment than what was delivered to a channel prior to the presence of the reservoir. The extent of long-term impacts caused by the flushed sediment on the channel morphology and habitat will in part depend on the residence time of the sediment within the channel. In this study we used MIKE 21C to model the fate of flushed sediment through a river channel where the bed material consists of an armoring layer of gravels overlying finer sediment. MIKE 21C is a two-dimensional curvilinear morphological model for rivers developed by DHI. Curvilinear means that the model grid may curve to better follow the channel and flow direction, for example in a meandering channel. Multiple bed material layers are included in the model to represent the armoring and underlying layers existing in the bed separately from the overlying flushed sediment. These layers may also mix. The nature of the interactions between these two layers helps regulate transport and deposition of the flushed sediment, thus are critical to assessing the fate of the flushed sediment and associated potential impacts.

  17. Geodetic imaging: Reservoir monitoring using satellite interferometry

    Science.gov (United States)

    Vasco, D.W.; Wicks, C.; Karasaki, K.; Marques, O.

    2002-01-01

    Fluid fluxes within subsurface reservoirs give rise to surface displacements, particularly over periods of a year or more. Observations of such deformation provide a powerful tool for mapping fluid migration within the Earth, providing new insights into reservoir dynamics. In this paper we use Interferometric Synthetic Aperture Radar (InSAR) range changes to infer subsurface fluid volume strain at the Coso geothermal field. Furthermore, we conduct a complete model assessment, using an iterative approach to compute model parameter resolution and covariance matrices. The method is a generalization of a Lanczos-based technique which allows us to include fairly general regularization, such as roughness penalties. We find that we can resolve quite detailed lateral variations in volume strain both within the reservoir depth range (0.4-2.5 km) and below the geothermal production zone (2.5-5.0 km). The fractional volume change in all three layers of the model exceeds the estimated model parameter uncertainly by a factor of two or more. In the reservoir depth interval (0.4-2.5 km), the predominant volume change is associated with northerly and westerly oriented faults and their intersections. However, below the geothermal production zone proper [the depth range 2.5-5.0 km], there is the suggestion that both north- and northeast-trending faults may act as conduits for fluid flow.

  18. Dissolved methane in Indian freshwater reservoirs

    Digital Repository Service at National Institute of Oceanography (India)

    Narvenkar, G.; Naqvi, S.W.A.; Kurian, S.; Shenoy, D.M.; Pratihary, A.K.; Naik, H.; Patil, S.; Sarkar, A.; Gauns, M.

    of the central part of the Indo- Gangetic Plain just north of the Tropic of Cancer. The eighth – the Bhakra-Nangal Dam is built over the Sutlej River at the foothills of the Himalayas. The reservoirs of these dams vary greatly in size from very small systems...

  19. Accounting for Greenhouse Gas Emissions from Reservoirs ...

    Science.gov (United States)

    Nearly three decades of research has demonstrated that the impoundment of rivers and the flooding of terrestrial ecosystems behind dams can increase rates of greenhouse gas emission, particularly methane. The 2006 IPCC Guidelines for National Greenhouse Gas Inventories includes a methodology for estimating methane emissions from flooded lands, but the methodology was published as an appendix to be used as a ‘basis for future methodological development’ due to a lack of data. Since the 2006 Guidelines were published there has been a 6-fold increase in the number of peer reviewed papers published on the topic including reports from reservoirs in India, China, Africa, and Russia. Furthermore, several countries, including Iceland, Switzerland, and Finland, have developed country specific methodologies for including flooded lands methane emissions in their National Greenhouse Gas Inventories. This presentation will include a review of the literature on flooded land methane emissions and approaches that have been used to upscale emissions for national inventories. We will also present ongoing research in the United States to develop a country specific methodology. In the U.S., research approaches include: 1) an effort to develop predictive relationships between methane emissions and reservoir characteristics that are available in national databases, such as reservoir size and drainage area, and 2) a national-scale probabilistic survey of reservoir methane em

  20. Quantitative Prediction of Structural Fractures in Low Permeability Reservoir

    Institute of Scientific and Technical Information of China (English)

    Zeng Lianbo; Tian Chonglu

    1996-01-01

    @@ Low -permeability fractured reservoirs will become increasingly prominent along with the enhanced exploration extent and the emerging moderate-high water content in most of the moderate-high permeability reservoirs of the oil fields in eastern China.

  1. 2007 Hydrologic and Sedimentation Survey of Altus Reservoir

    Data.gov (United States)

    US Bureau of Reclamation, Department of the Interior — Reclamation surveyed Altus Reservoir in November 2006, June 2007, and February 2008 to develop updated reservoir topography and compute the present storage-elevation...

  2. Analysis of Sedimentation in Wonogiri Reservoir

    Directory of Open Access Journals (Sweden)

    Tri Joko Inti Budi Santosa

    2016-01-01

    Full Text Available The Wonogiri reservoir which has 730 million cubic meters of total storage, 90 square kilometers of water area, and 1260 square kilometers of catchment area, is located in the Wonogiri Regency, Central Java Province. It was first established in 1981 and began its operation in 1982 with the expectation that it would last for about 100 years. Today (2002 the reservoir has got a serious problem of sedimentation. The sedimentation is so large that it would decrease the capacity storage of the reservoir and would shorten the length of operation. Therefore, it is necessary to predict the sediment that comes into the reservoir. This research would be based on the total sediment calculation of the sedimentation, through some methods, such as echo sounding measured data, land erosion (USLE, the calculation of the sediment in rivers. This research calculates the sediment capacities based on the water flow data and the sediment rating curves in rivers of Keduang, Tirtomoyo, Temon, upstream reach of Bengawan Solo, Alang, and Wuryantoro. The suspended load was calculated based on the sediment rating curves, whereas the bed load was computed as the percentage of the suspended load. The sum of both calculation results would be the total sediment. The calculation result showed that the total sediment which has come into the reservoir is 6.68 million cubic meters per year. As a comparison, the writer noted that the former researcher using echo sounding method done by the Faculty of Geography of the Universitas Gadjah Mada in 1985, it found that the total sediment capacity which came into the reservoir was 6.60 million cubic meters per year or 5.40 mm per year of sheet erosion. The other research using echo sounding method done by JICA in 2000 found that the total sediment which had come into the reservoir was 4.50 million cubic meters per year or 3.50 mm per year of sheet erosion. By knowing the results of calculation of the total sediment, we can learn that

  3. Numerical Simulation for Natural State of Two-Phase Liquid Dominated Geothermal Reservoir with Steam Cap Underlying Brine Reservoir

    Science.gov (United States)

    Pratama, Heru Berian; Miryani Saptadji, Nenny

    2016-09-01

    Hydrothermal reservoir which liquid-dominated hydrothermal reservoir is a type of geothermal reservoir that most widely used for power plant. The exploitation of mass and heat from the geothermal fluid will decrease the pressure in the reservoir over time. Therefore the pressure drop in the reservoir will have an impact on the formation of boiling zones or boiling will increase. The impacts are an increase in the fraction of steam, dryness, in the reservoir and with good vertical permeability will form a steam cap underlying the brine reservoir. The two- phase liquid dominated reservoir is sensitive to the porosity and difficult to assign average properties of the entire reservoir when there is boiling zone in some area of the reservoir. These paper showed successful development of two-phase liquid dominated geothermal reservoir and discussed the formation of steam cap above brine reservoir through numerical simulation for state natural conditions. The natural state modeling in steam cap shows a match with the conceptual model of the vapor-dominated developed. These paper also proofed the presence of transition zone, boiling zone, between steam cap and brine reservoir.

  4. Reservoir-induced seismicity associated with the Itoiz Reservoir, Spain: a case study

    Science.gov (United States)

    Durá-Gómez, Inmaculada; Talwani, Pradeep

    2010-04-01

    Reservoir-induced seismicity was observed in 2004 after the impoundment of the Itoiz Reservoir in the central-western Pyrenees, Spain. Subsequent annual filling cycles were accompanied by large epicentral growth in the northern part of the Jaca-Pamplona basin. Based on the evaluation of the available geohydrologic data, we suggest that the seismicity is associated with the diffusion of increased pore pressures along the carbonate megabreccia systems of the Early to Middle Eocene age Hecho Group. Assuming 1-D pore-pressure diffusion from the Itoiz Reservoir, we estimate that excess pore pressures of ~100-500 kPa are adequate to induce M >= 3.0 earthquakes in this geological terrane. The results of this study have potential applicability in regions where reservoirs are built over karst terranes.

  5. Reservoir management -- as conceived and applied on the Palinpinon reservoir, Phillipines

    Energy Technology Data Exchange (ETDEWEB)

    Sarmiento, Zosimo F.; Amistoso, Arthur E.

    1988-01-01

    The present exploitation of Palinpinon reservoir has revealed valuable information on the subsurface characteristics of the reservoir under large scale production. The initial behavior of the field has given signals that there is a need to implement appropriate strategies to optimise its capacity without jeopardizing the supply of adequate steam to the power plant. Some of the problems encountered such as reinjection returns, mineral deposition, ingress of acid fluid and other phenomena indicated the need to pursue an aggressive monitoring capability and timely appraisal of the field response to design an approach which will best suit the optimum management of the reservoir. The results of reservoir monitoring are discussed as well as the policies applied in operating the field.

  6. Reservoir pressure evolution model during exploration drilling

    Directory of Open Access Journals (Sweden)

    Korotaev B. A.

    2017-03-01

    Full Text Available Based on the analysis of laboratory studies and literature data the method for estimating reservoir pressure in exploratory drilling has been proposed, it allows identify zones of abnormal reservoir pressure in the presence of seismic data on reservoir location depths. This method of assessment is based on developed at the end of the XX century methods using d- and σ-exponentials taking into account the mechanical drilling speed, rotor speed, bit load and its diameter, lithological constant and degree of rocks' compaction, mud density and "regional density". It is known that in exploratory drilling pulsation of pressure at the wellhead is observed. Such pulsation is a consequence of transferring reservoir pressure through clay. In the paper the mechanism for transferring pressure to the bottomhole as well as the behaviour of the clay layer during transmission of excess pressure has been described. A laboratory installation has been built, it has been used for modelling pressure propagation to the bottomhole of the well through a layer of clay. The bulge of the clay layer is established for 215.9 mm bottomhole diameter. Functional correlation of pressure propagation through the layer of clay has been determined and a reaction of the top clay layer has been shown to have bulge with a height of 25 mm. A pressure distribution scheme (balance has been developed, which takes into account the distance from layers with abnormal pressure to the bottomhole. A balance equation for reservoir pressure evaluation has been derived including well depth, distance from bottomhole to the top of the formation with abnormal pressure and density of clay.

  7. Enhancement of seismic monitoring in hydrocarbon reservoirs

    Science.gov (United States)

    Caffagni, Enrico; Bokelmann, Götz

    2017-04-01

    Hydraulic Fracturing (HF) is widely considered as one of the most significant enablers of the successful exploitation of hydrocarbons in North America. Massive usage of HF is currently adopted to increase the permeability in shale and tight-sand deep reservoirs, despite the economical downturn. The exploitation success is less due to the subsurface geology, but in technology that improves exploration, production, and decision-making. This includes monitoring of the reservoir, which is vital. Indeed, the general mindset in the industry is to keep enhancing seismic monitoring. It allows understanding and tracking processes in hydrocarbon reservoirs, which serves two purposes, a) to optimize recovery, and b) to help minimize environmental impact. This raises the question of how monitoring, and especially seismic techniques could be more efficient. There is a pressing demand from seismic service industry to evolve quickly and to meet the oil-gas industry's changing needs. Nonetheless, the innovative monitoring techniques, to achieve the purpose, must enhance the characterization or the visualization of a superior-quality images of the reservoir. We discuss recent applications of seismic monitoring in hydrocarbon reservoirs, detailing potential enhancement and eventual limitations. The aim is to test the validity of these seismic monitoring techniques, qualitatively discuss their potential application to energy fields that are not only limited to HF. Outcomes from our investigation may benefit operators and regulators in case of future massive HF applications in Europe, as well. This work is part of the FracRisk consortium (www.fracrisk.eu), funded by the Horizon2020 research programme, whose aims is to help minimize the environmental footprint of the shale-gas exploration and exploitation.

  8. Authorized and Operating Purposes of Corps of Engineers Reservoirs

    Science.gov (United States)

    1992-07-01

    Puerto Rico CERRILLOS DAM AND RESERVOIR Jacksonville E-9O PORTUGUES DAM AND RESERVOIR Jacksonville E-92 South Carolina HARTWELL DAM AND LAKE Savannah E...LAKE Missouri Kansas City E-12 POMONA LAKE Kansas Kansas City E-12 PORTUGUES DAM AND RESERVOIR Puerto Rico Jacksonville E-92 PRADO DAM (SANTA ANA...PROJECT Florida Jacksonville E-92 PORTUGUES DAM AND RESERVOIR Puerto Rico Jacksonville E-92 RODMAN LOCK AND DAM (CROSS FLORIDA BARGE CANAL Florida

  9. Increasing Waterflood Reserves in the Wilmington Oil Field through Improved Reservoir Characterization and Reservoir Management

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, D.; Koerner, R.; Moos D.; Nguyen, J.; Phillips, C.; Tagbor, K.; Walker, S.

    1999-04-05

    This project used advanced reservoir characterization tools, including the pulsed acoustic cased-hole logging tool, geologic three-dimensional (3-D) modeling software, and commercially available reservoir management software to identify sands with remaining high oil saturation following waterflood. Production from the identified high oil saturated sands was stimulated by recompleting existing production and injection wells in these sands using conventional means as well as a short radius redrill candidate.

  10. Reservoir assessment of the Nubian sandstone reservoir in South Central Gulf of Suez, Egypt

    Science.gov (United States)

    El-Gendy, Nader; Barakat, Moataz; Abdallah, Hamed

    2017-05-01

    The Gulf of Suez is considered as one of the most important petroleum provinces in Egypt and contains the Saqqara and Edfu oil fields located in the South Central portion of the Gulf of Suez. The Nubian sandstone reservoir in the Gulf of Suez basin is well known for its great capability to store and produce large volumes of hydrocarbons. The Nubian sandstone overlies basement rocks throughout most of the Gulf of Suez region. It consists of a sequence of sandstones and shales of Paleozoic to Cretaceous age. The Nubian sandstone intersected in most wells has excellent reservoir characteristics. Its porosity is controlled by sedimentation style and diagenesis. The cementation materials are mainly kaolinite and quartz overgrowths. The permeability of the Nubian sandstone is mainly controlled by grain size, sorting, porosity and clay content especially kaolinite and decreases with increase of kaolinite. The permeability of the Nubian Sandstone is evaluated using the Nuclear Magnetic Resonance (NMR technology) and formation pressure data in addition to the conventional logs and the results were calibrated using core data. In this work, the Nubian sandstone was investigated and evaluated using complete suites of conventional and advanced logging techniques to understand its reservoir characteristics which have impact on economics of oil recovery. The Nubian reservoir has a complicated wettability nature which affects the petrophysical evaluation and reservoir productivity. So, understanding the reservoir wettability is very important for managing well performance, productivity and oil recovery.

  11. Sudden water pollution accidents and reservoir emergency operations: impact analysis at Danjiangkou Reservoir.

    Science.gov (United States)

    Zheng, Hezhen; Lei, Xiaohui; Shang, Yizi; Duan, Yang; Kong, Lingzhong; Jiang, Yunzhong; Wang, Hao

    2017-05-03

    Danjiangkou Reservoir is the source reservoir of the Middle Route of the South-to-North Water Diversion Project (MRP). Any sudden water pollution accident in the reservoir would threaten the water supply of the MRP. We established a 3-D hydrodynamic and water quality model for the Danjiangkou Reservoir, and proposed scientific suggestions on the prevention and emergency management for sudden water pollution accidents based on simulated results. Simulations were performed on 20 hypothetical pollutant discharge locations and 3 assumed amounts, in order to model the effect of pollutant spreading under different reservoir operation types. The results showed that both the location and mass of pollution affected water quality; however, different reservoir operation types had little effect. Five joint regulation scenarios, which altered the hydrodynamic processes of water conveyance for the Danjiangkou and Taocha dams, were considered for controlling pollution dispersion. The results showed that the spread of a pollutant could be effectively controlled through the joint regulation of the two dams and that the collaborative operation of the Danjiangkou and Taocha dams is critical for ensuring the security of water quality along the MRP.

  12. Daily reservoir sedimentation model: Case study from the Fena Valley Reservoir, Guam

    Science.gov (United States)

    Marineau, Mathieu D.; Wright, Scott A.

    2017-01-01

    A model to compute reservoir sedimentation rates at daily timescales is presented. The model uses streamflow and sediment load data from nearby stream gauges to obtain an initial estimate of sediment yield for the reservoir’s watershed; it is then calibrated to the total deposition calculated from repeat bathymetric surveys. Long-term changes to reservoir trapping efficiency are also taken into account. The model was applied to the Fena Valley Reservoir, a water supply reservoir on the island of Guam. This reservoir became operational in 1951 and was recently surveyed in 2014. The model results show that the highest rate of deposition occurred during two typhoons (Typhoon Alice in 1953 and Typhoon Tingting in 2004); each storm decreased reservoir capacity by approximately 2–3% in only a few days. The presented model can be used to evaluate the impact of an extreme event, or it can be coupled with a watershed runoff model to evaluate potential impacts to storage capacity as a result of climate change or other hydrologic modifications.

  13. Relation between facies, diagenesis, and reservoir quality of Rotliegende reservoirs in north Germany

    Energy Technology Data Exchange (ETDEWEB)

    David, F.; Gast, R.; Kraft, T. (BEB Erdgas Erdol GmbH, Hannover (Germany))

    1993-09-01

    In north Germany, the majority of Rotliegende gas fields is confined to an approximately 50 km-wide east-west-orientated belt, which is situated on the gently north-dipping flank of the southern Permian basin. Approximately 400 billion m[sup 3] of natural gas has been found in Rotliegende reservoir sandstones with average porosities of depths ranging from 3500 to 5000 m. Rotliegende deposition was controlled by the Autunian paleo-relief, and arid climate and cyclic transgressions of the desert lake. In general, wadis and large dunefields occur in the hinterland, sebkhas with small isolate dunes and shorelines define the coastal area, and a desert lake occurs to the north. The sandstones deposited in large dunefields contain only minor amounts of illite, anhydrite, and calcite and form good reservoirs. In contrast, the small dunes formed in the sebkha areas were affected by fluctuations of the desert lake groundwaters, causing the infiltration of detrital clay and precipitation of gypsum and calcite. These cements were transformed to illite, anhydrite, and calcite-II during later diagenesis, leading to a significant reduction of the reservoir quality. The best reservoirs occur in the shoreline sandstones because porosity and permeability were preserved by early magnesium-chlorite diagenesis. Since facies controls diagenesis and consequently reservoir quality, mapping of facies also indicates the distribution of reservoir and nonreservoir rocks. This information is used to identify play area and to interpret and calibrate three-dimensional seismic data.

  14. Ordovician Basement Hydrocarbon Reservoirs in the Tarim Basin, China

    Institute of Scientific and Technical Information of China (English)

    YAN Xiangbin; LI Tiejun; ZHANG Tao

    2004-01-01

    Ordovician marine carbonate basement traps are widely developed in the paleo-highs and paleo-slopes in the Tarim Basin. Reservoirs are mainly altered pore-cavity-fissure reservoirs. Oil sources are marine carbonate rocks of the Lower Paleozoic. Thus, the paleo-highs and paleo-slopes have good reservoiring conditions and they are the main areas to explore giant and large-scale oil reservoirs. The main factors for their reservoiring are: (1) Effective combination of fenestral pore-cavity-fracture reservoirs, resulting from multi-stage, multi-cyclic karstification (paleo-hypergene and deep buried) and fracturing, with effective overlying seals, especially mudstone and gypsum mudstone in the Carboniferous Bachu Formation, is essential to hydrocarbon reservoiring and high and stable production; (2) Long-term inherited large rises and multi-stage fracture systems confine the development range of karst reservoirs and control hydrocarbon migration, accumulation and reservoiring; (3) Long-term multi-source hydrocarbon supply, early reservoiring alteration and late charging adjustment are important reservoiring mechanisms and determine the resource structure and oil and gas properties. Favorable areas for exploration of Ordovician carbonate basement hydrocarbon reservoirs in the Tarim Basin are the Akekule rise, Katahe uplift, Hetianhe paleo-high and Yakela faulted rise.

  15. ‘A reservoir within a reservoir’ – An unusual complication associated with a defunctioned inflatable penile prosthesis reservoir

    Directory of Open Access Journals (Sweden)

    Hamid Abboudi

    2014-01-01

    CONCLUSION: It is our belief that a defunctionalized reservoir serves no purpose; rather it can only cause trouble in the future. Consequently, at our institution we do not leave defunctionalized reservoirs in situ.

  16. Effects of water-supply reservoirs on streamflow in Massachusetts

    Science.gov (United States)

    Levin, Sara B.

    2016-10-06

    State and local water-resource managers need modeling tools to help them manage and protect water-supply resources for both human consumption and ecological needs. The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, has developed a decision-support tool to estimate the effects of reservoirs on natural streamflow. The Massachusetts Reservoir Simulation Tool is a model that simulates the daily water balance of a reservoir. The reservoir simulation tool provides estimates of daily outflows from reservoirs and compares the frequency, duration, and magnitude of the volume of outflows from reservoirs with estimates of the unaltered streamflow that would occur if no dam were present. This tool will help environmental managers understand the complex interactions and tradeoffs between water withdrawals, reservoir operational practices, and reservoir outflows needed for aquatic habitats.A sensitivity analysis of the daily water balance equation was performed to identify physical and operational features of reservoirs that could have the greatest effect on reservoir outflows. For the purpose of this report, uncontrolled releases of water (spills or spillage) over the reservoir spillway were considered to be a proxy for reservoir outflows directly below the dam. The ratio of average withdrawals to the average inflows had the largest effect on spillage patterns, with the highest withdrawals leading to the lowest spillage. The size of the surface area relative to the drainage area of the reservoir also had an effect on spillage; reservoirs with large surface areas have high evaporation rates during the summer, which can contribute to frequent and long periods without spillage, even in the absence of water withdrawals. Other reservoir characteristics, such as variability of inflows, groundwater interactions, and seasonal demand patterns, had low to moderate effects on the frequency, duration, and magnitude of spillage. The

  17. Third workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P. (eds.)

    1977-12-15

    The Third Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 14, 1977, with 104 attendees from six nations. In keeping with the recommendations expressed by the participants at the Second Workshop, the format of the Workshop was retained, with three days of technical sessions devoted to reservoir physics, well and reservoir testing, field development, and mathematical modeling of geothermal reservoirs. The program presented 33 technical papers, summaries of which are included in these Proceedings. Although the format of the Workshop has remained constant, it is clear from a perusal of the Table of Contents that considerable advances have occurred in all phases of geothermal reservoir engineering over the past three years. Greater understanding of reservoir physics and mathematical representations of vapor-dominated and liquid-dominated reservoirs are evident; new techniques for their analysis are being developed, and significant field data from a number of newer reservoirs are analyzed. The objectives of these workshops have been to bring together researchers active in the various physical and mathematical disciplines comprising the field of geothermal reservoir engineering, to give the participants a forum for review of progress and exchange of new ideas in this rapidly developing field, and to summarize the effective state of the art of geothermal reservoir engineering in a form readily useful to the many government and private agencies involved in the development of geothermal energy. To these objectives, the Third Workshop and these Proceedings have been successfully directed. Several important events in this field have occurred since the Second Workshop in December 1976. The first among these was the incorporation of the Energy Research and Development Administration (ERDA) into the newly formed Department of Energy (DOE) which continues as the leading Federal agency in geothermal reservoir engineering research. The Third

  18. Modeling Reservoir-River Networks in Support of Optimizing Seasonal-Scale Reservoir Operations

    Science.gov (United States)

    Villa, D. L.; Lowry, T. S.; Bier, A.; Barco, J.; Sun, A.

    2011-12-01

    HydroSCOPE (Hydropower Seasonal Concurrent Optimization of Power and the Environment) is a seasonal time-scale tool for scenario analysis and optimization of reservoir-river networks. Developed in MATLAB, HydroSCOPE is an object-oriented model that simulates basin-scale dynamics with an objective of optimizing reservoir operations to maximize revenue from power generation, reliability in the water supply, environmental performance, and flood control. HydroSCOPE is part of a larger toolset that is being developed through a Department of Energy multi-laboratory project. This project's goal is to provide conventional hydropower decision makers with better information to execute their day-ahead and seasonal operations and planning activities by integrating water balance and operational dynamics across a wide range of spatial and temporal scales. This presentation details the modeling approach and functionality of HydroSCOPE. HydroSCOPE consists of a river-reservoir network model and an optimization routine. The river-reservoir network model simulates the heat and water balance of river-reservoir networks for time-scales up to one year. The optimization routine software, DAKOTA (Design Analysis Kit for Optimization and Terascale Applications - dakota.sandia.gov), is seamlessly linked to the network model and is used to optimize daily volumetric releases from the reservoirs to best meet a set of user-defined constraints, such as maximizing revenue while minimizing environmental violations. The network model uses 1-D approximations for both the reservoirs and river reaches and is able to account for surface and sediment heat exchange as well as ice dynamics for both models. The reservoir model also accounts for inflow, density, and withdrawal zone mixing, and diffusive heat exchange. Routing for the river reaches is accomplished using a modified Muskingum-Cunge approach that automatically calculates the internal timestep and sub-reach lengths to match the conditions of

  19. Fate of Organic Carbon Deposited in Reservoirs

    Science.gov (United States)

    Huntington, T. G.; Rhoton, F. E.; Bennett, S. J.; Hudnall, W. H.

    2002-05-01

    Sedimentation of soil organic carbon (SOC) eroded from uplands and deposited in reservoirs could be an important mechanism for carbon sequestration provided that it is conserved during transport and burial and that uplands are not experiencing net loss. There are uncertainties in both these assumptions and gaining a better understanding of these processes is a key objective of ongoing carbon-cycle investigations. The U.S. Geological Survey, the U. S. Department of Agriculture, and Louisiana State University Agricultural Center are collaborating on an investigation of soils and sediments in the Yalobusha River Basin in Mississippi. Sediment cores were collected from upland soils and from Grenada Lake, a flood control reservoir, in the basin. Suspended sediments have been collected from the Yalobusha River and one of its tributaries upstream of the lake. We are measuring carbon mineralization potential in conjunction with carbon and nitrogen concentrations, 13C, mineralogy, and texture on sediments and upland soils to determine whether eroding SOC is conserved or oxidized during transport and burial. Differences in mineralization potential and other chemical and physical properties are used to infer net changes in the original eroding SOC. Autochthonous production of SOC within reservoirs could replace labile SOC oxidized during transport and burial thereby masking losses due to oxidation. Autochthonous sources can be evaluated by chemical and physical characterization of the sediments. Stable carbon isotope (13C) geochemistry provides a tool for distinguishing the two primary sources of organic carbon incorporated in lake sediments because allochthonous SOC from the surrounding watershed is, in general, less depleted in stable 13C than autochthonous SOC produced in the lake by aquatic organisms such as macrophytes and phytoplankton. The integration of the 13C signature recorded in the organic fraction of the lake sediments with total organic carbon, C/N ratio

  20. An Intelligent Systems Approach to Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Shahab D. Mohaghegh; Jaime Toro; Thomas H. Wilson; Emre Artun; Alejandro Sanchez; Sandeep Pyakurel

    2005-08-01

    Today, the major challenge in reservoir characterization is integrating data coming from different sources in varying scales, in order to obtain an accurate and high-resolution reservoir model. The role of seismic data in this integration is often limited to providing a structural model for the reservoir. Its relatively low resolution usually limits its further use. However, its areal coverage and availability suggest that it has the potential of providing valuable data for more detailed reservoir characterization studies through the process of seismic inversion. In this paper, a novel intelligent seismic inversion methodology is presented to achieve a desirable correlation between relatively low-frequency seismic signals, and the much higher frequency wireline-log data. Vertical seismic profile (VSP) is used as an intermediate step between the well logs and the surface seismic. A synthetic seismic model is developed by using real data and seismic interpretation. In the example presented here, the model represents the Atoka and Morrow formations, and the overlying Pennsylvanian sequence of the Buffalo Valley Field in New Mexico. Generalized regression neural network (GRNN) is used to build two independent correlation models between; (1) Surface seismic and VSP, (2) VSP and well logs. After generating virtual VSP's from the surface seismic, well logs are predicted by using the correlation between VSP and well logs. The values of the density log, which is a surrogate for reservoir porosity, are predicted for each seismic trace through the seismic line with a classification approach having a correlation coefficient of 0.81. The same methodology is then applied to real data taken from the Buffalo Valley Field, to predict inter-well gamma ray and neutron porosity logs through the seismic line of interest. The same procedure can be applied to a complete 3D seismic block to obtain 3D distributions of reservoir properties with less uncertainty than the geostatistical

  1. Modeling reservoir geomechanics using discrete element method : Application to reservoir monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Alassi, Haitham Tayseer

    2008-09-15

    Understanding reservoir geomechanical behavior is becoming more and more important for the petroleum industry. Reservoir compaction, which may result in surface subsidence and fault reactivation, occurs during reservoir depletion. Stress changes and possible fracture development inside and outside a depleting reservoir can be monitored using time-lapse (so-called '4D') seismic and/or passive seismic, and this can give valuable information about the conditions of a given reservoir during production. In this study we will focus on using the (particle-based) Discrete Element Method (DEM) to model reservoir geomechanical behavior during depletion and fluid injection. We show in this study that DEM can be used in modeling reservoir geomechanical behavior by comparing results obtained from DEM to those obtained from analytical solutions. The match of the displacement field between DEM and the analytical solution is good, however there is mismatch of the stress field which is related to the way stress is measured in DEM. A good match is however obtained by measuring the stress field carefully. We also use DEM to model reservoir geomechanical behavior beyond the elasticity limit where fractures can develop and faults can reactivate. A general technique has been developed to relate DEM parameters to rock properties. This is necessary in order to use correct reservoir geomechanical properties during modeling. For any type of particle packing there is a limitation that the maximum ratio between P- and S-wave velocity Vp/Vs that can be modeled is 3 . The static behavior for a loose packing is different from the dynamic behavior. Empirical relations are needed for the static behavior based on numerical test observations. The dynamic behavior for both dense and loose packing can be given by analytical relations. Cosserat continuum theory is needed to derive relations for Vp and Vs. It is shown that by constraining the particle rotation, the S-wave velocity can be

  2. The Application of 3-D Visible Technology to Reservoir Management

    Institute of Scientific and Technical Information of China (English)

    Yu Long; LIU Tao

    2002-01-01

    The paper deals with the application of 3 -D visible technology to reservoir management. Making use of this method for expanding - spread data point in reservoir management, can discard the false and retain the true during data recording. As a result, The quality of data recording is ensured. In reservoir description, the reservoir characteristics, such as space distribution,physical change and fluid distribution may be identified by restoring palaeostructures, building - up 3-D facics tract model and 3-D fracture system model. Seismic interpretation, geologic modeling and numerical simulation are well integrated so that they can be promote reservoir performance management to develop into the intensive management pattern.

  3. Method of extracting heat from dry geothermal reservoirs

    Science.gov (United States)

    Potter, R.M.; Robinson, E.S.; Smith, M.C.

    1974-01-22

    Hydraulic fracturing is used to interconnect two or more holes that penetrate a previously dry geothermal reservoir, and to produce within the reservoir a sufficiently large heat-transfer surface so that heat can be extracted from the reservoir at a usefully high rate by a fluid entering it through one hole and leaving it through another. Introduction of a fluid into the reservoir to remove heat from it and establishment of natural (unpumped) convective circulation through the reservoir to accomplish continuous heat removal are important and novel features of the method. (auth)

  4. An integrated study of a Campeche Bay fractured carbonate reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Hampton, D.W.; Hernandez, J.G.; Vasques, G.A.V.; Aquino, E.V.; Barton, C.; Laude, L.; Lockhart, A.M.E.; Peebles, R.G.

    1994-12-31

    This paper provides a case study in the reservoir description of a fractured carbonate by a multi-disciplinary team. It illustrates how the synergistic interaction of team members during data analysis and model building resulted in: (1) the identification of previously unrecognized links between several reservoir characteristics; (2) produced a superior reservoir model; and (3) increased the likelihood of successful development. In summary, identification, characterization, and delineation of fractured intervals within the deepwater carbonate succession resulted in a preliminary 3-D model of both the static and dynamic properties for the Cretaceous reservoir of the Yum Field which, through reservoir simulation, will provide a predictive tool for development planning.

  5. Reservoir simulation with MUFITS code: Extension for double porosity reservoirs and flows in horizontal wells

    Science.gov (United States)

    Afanasyev, Andrey

    2017-04-01

    Numerical modelling of multiphase flows in porous medium is necessary in many applications concerning subsurface utilization. An incomplete list of those applications includes oil and gas fields exploration, underground carbon dioxide storage and geothermal energy production. The numerical simulations are conducted using complicated computer programs called reservoir simulators. A robust simulator should include a wide range of modelling options covering various exploration techniques, rock and fluid properties, and geological settings. In this work we present a recent development of new options in MUFITS code [1]. The first option concerns modelling of multiphase flows in double-porosity double-permeability reservoirs. We describe internal representation of reservoir models in MUFITS, which are constructed as a 3D graph of grid blocks, pipe segments, interfaces, etc. In case of double porosity reservoir, two linked nodes of the graph correspond to a grid cell. We simulate the 6th SPE comparative problem [2] and a five-spot geothermal production problem to validate the option. The second option concerns modelling of flows in porous medium coupled with flows in horizontal wells that are represented in the 3D graph as a sequence of pipe segments linked with pipe junctions. The well completions link the pipe segments with reservoir. The hydraulics in the wellbore, i.e. the frictional pressure drop, is calculated in accordance with Haaland's formula. We validate the option against the 7th SPE comparative problem [3]. We acknowledge financial support by the Russian Foundation for Basic Research (project No RFBR-15-31-20585). References [1] Afanasyev, A. MUFITS Reservoir Simulation Software (www.mufits.imec.msu.ru). [2] Firoozabadi A. et al. Sixth SPE Comparative Solution Project: Dual-Porosity Simulators // J. Petrol. Tech. 1990. V.42. N.6. P.710-715. [3] Nghiem L., et al. Seventh SPE Comparative Solution Project: Modelling of Horizontal Wells in Reservoir Simulation

  6. The Classification and Model of Coalbed Methane Reservoirs

    Institute of Scientific and Technical Information of China (English)

    SU Xianbo; LIN Xiaoying; SONG Yah; ZHAO Mengjun

    2004-01-01

    Coalbed methane has been explored in many basins worldwide for 30 years, and has been developed commercially in some of the basins. Many researchers have described the characteristics of coalbed methane geology and technology systematically. According to these investigations, a coalbed methane reservoir can be defined: "a coal seam that contains some coalbed methane and is isolated from other fluid units is called a coalbed methane reservoir".On the basis of anatomizafion, analysis, and comparison of the typical coalbed methane reservoirs, coalbed methane reservoirs can be divided into two classes: the hydrodynamic sealing coalbed methane reservoirs and the self-sealing coalbed methane reservoirs. The former can be further divided into two sub-classes: the hydrodynamic capping coalbed methane reservoirs, which can be divided into five types and the hydrodynamic driving coalbed methane reservoirs,which can be divided into three types. The latter can be divided into three types. Currently, hydrodynamic sealing reservoirs are the main target for coalbed methane exploration and development; self-sealing reservoirs are unsuitable for coalbed methane exploration and development, but they are closely related with coal mine gas hazards. Finally, a model for hydrodynamic sealing coalbed methane reservoirs is established.

  7. Simulation of California's Major Reservoirs Outflow Using Data Mining Technique

    Science.gov (United States)

    Yang, T.; Gao, X.; Sorooshian, S.

    2014-12-01

    The reservoir's outflow is controlled by reservoir operators, which is different from the upstream inflow. The outflow is more important than the reservoir's inflow for the downstream water users. In order to simulate the complicated reservoir operation and extract the outflow decision making patterns for California's 12 major reservoirs, we build a data-driven, computer-based ("artificial intelligent") reservoir decision making tool, using decision regression and classification tree approach. This is a well-developed statistical and graphical modeling methodology in the field of data mining. A shuffled cross validation approach is also employed to extract the outflow decision making patterns and rules based on the selected decision variables (inflow amount, precipitation, timing, water type year etc.). To show the accuracy of the model, a verification study is carried out comparing the model-generated outflow decisions ("artificial intelligent" decisions) with that made by reservoir operators (human decisions). The simulation results show that the machine-generated outflow decisions are very similar to the real reservoir operators' decisions. This conclusion is based on statistical evaluations using the Nash-Sutcliffe test. The proposed model is able to detect the most influential variables and their weights when the reservoir operators make an outflow decision. While the proposed approach was firstly applied and tested on California's 12 major reservoirs, the method is universally adaptable to other reservoir systems.

  8. Mathematical simulation of oil reservoir properties

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, A. [Instituto Politecnico Nacional (SEPI-ESQIE-UPALM-IPN), Unidad Profesional Zacatenco, Laboratorio de Analisis Met., Edif. ' Z' y Edif. 6 planta baja., Mexico City c.p. 07300 (Mexico)], E-mail: adalop123@mailbanamex.com; Romero, A.; Chavez, F. [Instituto Politecnico Nacional (SEPI-ESQIE-UPALM-IPN), Unidad Profesional Zacatenco, Laboratorio de Analisis Met., Edif. ' Z' y Edif. 6 planta baja., Mexico City c.p. 07300 (Mexico); Carrillo, F. [Instituto Politecnico Nacional (CICATA-IPN, Altamira Tamaulipas) (Mexico); Lopez, S. [Instituto Mexicano del Petroleo - Molecular Engineering Researcher (Mexico)

    2008-11-15

    The study and computational representation of porous media properties are very important for many industries where problems of fluid flow, percolation phenomena and liquid movement and stagnation are involved, for example, in building constructions, ore processing, chemical industries, mining, corrosion sciences, etc. Nevertheless, these kinds of processes present a noneasy behavior to be predicted and mathematical models must include statistical analysis, fractal and/or stochastic procedures to do it. This work shows the characterization of sandstone berea core samples which can be found as a porous media (PM) in natural oil reservoirs, rock formations, etc. and the development of a mathematical algorithm for simulating the anisotropic characteristics of a PM based on a stochastic distribution of some of their most important properties like porosity, permeability, pressure and saturation. Finally a stochastic process is used again to simulated the topography of an oil reservoir.

  9. Integration of production data into reservoir models

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, D.S.; Reynolds, A.C.; Abacioglu, Y. [Tulsa Univ., Dept. of Petroleum Engineering, Tulsa, OK (United States); Bi, Z. [Duke Univ., Mathematics Dept., Durham, NC (United States)

    2001-05-01

    The problem of mapping reservoir properties, such as porosity and permeability, and of assessing the uncertainty in the mapping has been largely approached probabilistically, i.e. uncertainty is estimated based on the properties of an ensemble of random realizations of the reservoir properties all of which satisfy constraints provided by data and prior geological knowledge. When the constraints include observations of production characteristics, the problem of generating a representative ensemble of realizations can be quite difficult partly because the connection between a measurement of water-cut or GOR at a well and the permeability at some other location is by no means obvious. In this paper, the progress towards incorporation of production data and remaining challenges are reviewed. (Author)

  10. Overspill avalanching in a dense reservoir network

    CERN Document Server

    Mamede, G L; Schneider, C M; de Araújo, J C; Herrmann, H J

    2012-01-01

    Sustainability of communities, agriculture, and industry is strongly dependent on an effective storage and supply of water resources. In some regions the economic growth has led to a level of water demand which can only be accomplished through efficient reservoir networks. Such infrastructures are not always planned at larger scale but rather made by farmers according to their local needs of irrigation during droughts. Based on extensive data from the upper Jaguaribe basin, one of the world's largest system of reservoirs, located in the Brazilian semiarid northeast, we reveal that surprisingly it self-organizes into a scale-free network exhibiting also a power-law in the distribution of the lakes and avalanches of discharges. With a new self-organized-criticality-type model we manage to explain the novel critical exponents. Implementing a flow model we are able to reproduce the measured overspill evolution providing a tool for catastrophe mitigation and future planning.

  11. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    D. O. Hitzman; A. K. Stepp; D. M. Dennis; L. R. Graumann

    2003-03-31

    This research program is directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal is to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work is underway. Microbial cultures have been isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters with cultures and conditions representative of oil reservoirs. Field pilot studies are underway.

  12. Analysis of production decline in geothermal reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Zais, Elliot J.; Bodvarsson, Gunnar

    1980-09-01

    The major objectives of the Decline Curve project were to: (1) test the decline analysis methods used in the petroleum industry on geothermal production data; (2) examine and/or develop new analysis methods; and (3) develop a standard operating procedure for analyzing geothermal production data. Various analysis methods have long been available but they have not been tested on geothermal data because of the lack of publicly available data. The recent release to publication of substantial data sets from Wairakei, New Zealand, Cerro Prieto, Mexico and The Geysers, USA has made this study possible. Geothermal reservoirs are quite different from petroleum reservoirs in many ways so the analysis methods must be tested using geothermal data.

  13. New proposed method for prediction of reservoir sedimentation distribution

    Institute of Scientific and Technical Information of China (English)

    H. Hosseinjanzadeh; K. Hosseini; K. Kaveh; S.F. Mousavi

    2015-01-01

    abstract Prediction of sediment distribution in reservoirs is an important issue for dam designers to determine the reservoir active storage capacity. Methods proposed to calculate sediment distribution are varied, and mainly empirical. Among all the methods currently available, only area-reduction and area-increment methods are considered as the principal methods for prediction of sediment distribution. In this paper, data of 16 reservoirs in the United States are used to propose a new empirical method for prediction of sediment distribution in reservoirs. In the proposed method, reservoir sediment distribu-tion is related to sediment volume and original reservoir characteristics. To validate the accuracy of the new proposed method, obtained results are compared with survey data for two reservoirs. The results of this investigation showed that the proposed method has an acceptable accuracy.

  14. Heavy oil reservoirs recoverable by thermal technology. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kujawa, P.

    1981-02-01

    This volume contains reservoir, production, and project data for target reservoirs which contain heavy oil in the 8 to 25/sup 0/ API gravity range and are susceptible to recovery by in situ combustion and steam drive. The reservoirs for steam recovery are less than 2500 feet deep to comply with state-of-the-art technology. In cases where one reservoir would be a target for in situ combustion or steam drive, that reservoir is reported in both sections. Data were collectd from three source types: hands-on (A), once-removed (B), and twice-removed (C). In all cases, data were sought depicting and characterizing individual reservoirs as opposed to data covering an entire field with more than one producing interval or reservoir. The data sources are listed at the end of each case. This volume also contains a complete listing of operators and projects, as well as a bibliography of source material.

  15. Optimized recovery through cooperative geology and reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    Craig, F.F. Jr.; Willcox, P.J.; Ballard, J.R.; Nation, W.R.

    1976-01-01

    Two examples of the use of this combined geology-reservoir engineering technique are taken from the international arena of operations. The first involves a gas reservoir in the U.K.-North Sea waters and the second an oil reservoir in the Gulf of Suez, Egypt. The improved reservoir description obtained for each of these reservoirs is permitting a better assessment of future performance as influenced by various operating alternatives. Waterflooding is relatively tolerant of reservoir nonuniformities. However, the need for additional reserves leads to increased utilization of improved recovery techniques, beyond waterflooding, for secondary as well as tertiary application. The development of better reservoir descriptions will provide guidance on the need for special sweep improvement techniques and ultimately lead to both maximum oil production and reduced risk in application of improved recovery processes.

  16. Enhanced output entanglement with reservoir engineering

    OpenAIRE

    Yan, Xiao-Bo

    2017-01-01

    We study the output entanglement in a three-mode optomechanical system via reservoir engineering by shifting the center frequency of filter function away from resonant frequency. We find the bandwidth of the filter function can suppress the entanglement in the vicinity of resonant frequency of the system, while the entanglement will become prosperous if the center frequency departs from the resonant frequency. We obtain the approximate analytical expressions of the output entanglement, and fr...

  17. Reservoir engineering with ultracold Rydberg atoms

    OpenAIRE

    Schönleber, David W.; Bentley, Christopher D. B.; Eisfeld, Alexander

    2016-01-01

    We apply reservoir engineering to construct a thermal environment with controllable temperature in an ultracold atomic Rydberg system. A Boltzmann distribution of the system's eigenstates is produced by optically driving a small environment of ultracold atoms, which is coupled to a photonic continuum through spontaneous emission. This technique provides a useful tool for quantum simulation of dynamics coupled to a thermal environment. Additionally, we demonstrate that pure eigenstates, such a...

  18. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Bailey, S.A.; Stepp, A.K.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

  19. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Stepp, A.K.; Dennis, D.M.; Graumann, L.R.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents.

  20. Study of Dieldrin in Coralville Reservoir

    OpenAIRE

    Jeremy Smith

    2013-01-01

    Using existing experimental data taken over a period of roughly 12 years that documents the concentrations of dieldrin levels in the environment and fatty tissue of the fish, we construct a model of the total dieldrin concentration decline. Comparisons between the experimental data and speculative data can be made using calculus and elements of statistics in order to better understand the movement of dieldrin in the reservoir. Because of the potentially harmful exposure effects of dieldrin to...

  1. Geomechanical Properties of Unconventional Shale Reservoirs

    Directory of Open Access Journals (Sweden)

    Mohammad O. Eshkalak

    2014-01-01

    Full Text Available Production from unconventional reservoirs has gained an increased attention among operators in North America during past years and is believed to secure the energy demand for next decades. Economic production from unconventional reservoirs is mainly attributed to realizing the complexities and key fundamentals of reservoir formation properties. Geomechanical well logs (including well logs such as total minimum horizontal stress, Poisson’s ratio, and Young, shear, and bulk modulus are secured source to obtain these substantial shale rock properties. However, running these geomechanical well logs for the entire asset is not a common practice that is associated with the cost of obtaining these well logs. In this study, synthetic geomechanical well logs for a Marcellus shale asset located in southern Pennsylvania are generated using data-driven modeling. Full-field geomechanical distributions (map and volumes of this asset for five geomechanical properties are also created using general geostatistical methods coupled with data-driven modeling. The results showed that synthetic geomechanical well logs and real field logs fall into each other when the input dataset has not seen the real field well logs. Geomechanical distributions of the Marcellus shale improved significantly when full-field data is incorporated in the geostatistical calculations.

  2. Second workshop geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.; Ramey, H.J. Jr. (eds.)

    1976-12-03

    The Arab oil embargo of 1973 focused national attention on energy problems. A national focus on development of energy sources alternative to consumption of hydrocarbons led to the initiation of research studies of reservoir engineering of geothermal systems, funded by the National Science Foundation. At that time it appeared that only two significant reservoir engineering studies of geothermal reservoirs had been completed. Many meetings concerning development of geothermal resources were held from 1973 through the date of the first Stanford Geothermal Reservoir Engineering workshop December 15-17, 1975. These meetings were similar in that many reports dealt with the objectives of planned research projects rather than with results. The first reservoir engineering workshop held under the Stanford Geothermal Program was singular in that for the first time most participants were reporting on progress inactive research programs rather than on work planned. This was true for both laboratory experimental studies and for field experiments in producing geothermal systems. The Proceedings of the December 1975 workshop (SGP-TR-12) is a remarkable document in that results of both field operations and laboratory studies were freely presented and exchanged by all participants. With this in mind the second reservoir engineering workshop was planned for December 1976. The objectives were again two-fold. First, the workshop was designed as a forum to bring together researchers active in various physical and mathematical branches of the developing field of geothermal reservoir engineering, to give participants a current and updated view of progress being made in the field. The second purpose was to prepare this Proceedings of Summaries documenting the state of the art as of December 1976. The proceedings will be distributed to all interested members of the geothermal community involved in the development and utilization of the geothermal resources in the world. Many notable

  3. Oil Reservoir Production Optimization using Optimal Control

    DEFF Research Database (Denmark)

    Völcker, Carsten; Jørgensen, John Bagterp; Stenby, Erling Halfdan

    2011-01-01

    Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using the adjo......Practical oil reservoir management involves solution of large-scale constrained optimal control problems. In this paper we present a numerical method for solution of large-scale constrained optimal control problems. The method is a single-shooting method that computes the gradients using...... the adjoint method. We use an Explicit Singly Diagonally Implicit Runge-Kutta (ESDIRK) method for the integration and a quasi-Newton Sequential Quadratic Programming (SQP) algorithm for the constrained optimization. We use this algorithm in a numerical case study to optimize the production of oil from an oil...... reservoir using water ooding and smart well technology. Compared to the uncontrolled case, the optimal operation increases the Net Present Value of the oil field by 10%....

  4. ARTIFICIAL FISH PROPAGATION IN KANEV RESERVOIR

    Directory of Open Access Journals (Sweden)

    O. B. Gurbik

    2014-11-01

    Full Text Available Based on the analysis of the dynamics of structural parameters of fish fauna of the Kanev reservoir, we determined the major measures for artificial fish propagation (stocking, which would allow increasing their commercial stocks and maintain biological diversity. It was found that main biological factors, which defined the conditions of existence of fish at different stages of their life cycle in the Kanev reservoir was as a whole favorable for providing sufficient efficiency of measures for stocking it with juveniles of commercially and environmentally valuable fishes. With current state of fish fauna and possibilities of fish hatcheries, the priority in the part of artificial maintenance of fish populations should be given to pike-perch, wels, and tench. An increase of amounts of commercial catches should be based first of all on full-scale stocking with silver and bighead carps, the created stock of which will be available for effective exploitation at a regime, which is protective for native fish fauna. The current bioproductive potential allows increasing the indices of the stock of commercially valuable species up to 120 kg/ha that is twice more than the actual indices for 2012-2013. Key words: fish fauna, artificial propagation, commercial stock, Kanev reservoir.

  5. Seismic imaging capabilities optimize reservoir management

    Energy Technology Data Exchange (ETDEWEB)

    Kristiansen, P. [Geco-Prakla, Oslo (Norway); Currie, M.T. [BP Exploration, Aberdeen (United Kingdom)

    1995-12-01

    Despite the fact that seismic is the only known method for illuminating the subsurface at any distance from a well, little has been done to use seismic as a tool for monitoring changes in the reservoir over time. This will change as 4-D, or time-lapse, seismic becomes more common. A permanent 4-D system has been installed at the Foinaven field, West of Shetlands in the North Sea. Tracking fluid or gas movements through seismic reservoir monitoring is the primary objective of 4-D seismic technology. Areas that do not show significant changes in the seismic response over time may indicate pools of bypassed oil that could be drilled and drained. This in itself could contribute an increased recovery by several percent. Unexpected changes in reservoir contacts could be used to identify hydraulic barriers and high permeability zones not interpreted on the original seismic or identified through well testing. Another application of monitoring the fluid or gas front would be to anticipate and possibly avoid early breakthrough in time to mitigate loss of flow rate and ultimate recovery.

  6. Optimizing withdrawal from drinking water reservoirs to reduce downstream temperature pollution and reservoir hypoxia.

    Science.gov (United States)

    Weber, M; Rinke, K; Hipsey, M R; Boehrer, B

    2017-03-20

    Sustainable management of drinking water reservoirs requires balancing the demands of water supply whilst minimizing environmental impact. This study numerically simulates the effect of an improved withdrawal scheme designed to alleviate the temperature pollution downstream of a reservoir. The aim was to identify an optimal withdrawal strategy such that water of a desirable discharge temperature can be supplied downstream without leading to unacceptably low oxygen concentrations within the reservoir. First, we calibrated a one-dimensional numerical model for hydrodynamics and oxygen dynamics (GLM-AED2), verifying that the model reproduced water temperatures and hypolimnetic dissolved oxygen concentrations accurately over a 5 year period. Second, the model was extended to include an adaptive withdrawal functionality, allowing for a prescribed withdrawal temperature to be found, with the potential constraint of hypolimnetic oxygen concentration. Scenario simulations on epi-/metalimnetic withdrawal demonstrate that the model is able to autonomously determine the best withdrawal height depending on the thermal structure and the hypolimnetic oxygen concentration thereby optimizing the ability to supply a desirable discharge temperature to the downstream river during summer. This new withdrawal strategy also increased the hypolimnetic raw water volume to be used for drinking water supply, but reduced the dissolved oxygen concentrations in the deep and cold water layers (hypolimnion). Implications of the results for reservoir management are discussed and the numerical model is provided for operators as a simple and efficient tool for optimizing the withdrawal strategy within different reservoir contexts.

  7. Reservoir-on-a-chip (ROC): a new paradigm in reservoir engineering.

    Science.gov (United States)

    Gunda, Naga Siva Kumar; Bera, Bijoyendra; Karadimitriou, Nikolaos K; Mitra, Sushanta K; Hassanizadeh, S Majid

    2011-11-21

    In this study, we design a microfluidic chip, which represents the pore structure of a naturally occurring oil-bearing reservoir rock. The pore-network has been etched in a silicon substrate and bonded with a glass covering layer to make a complete microfluidic chip, which is termed as 'Reservoir-on-a-chip' (ROC). Here we report, for the first time, the ability to perform traditional waterflooding experiments in a ROC. Oil is kept as the resident phase in the ROC, and waterflooding is performed to displace the oil phase from the network. The flow visualization provides specific information about the presence of the trapped oil phase and the movement of the oil/water interface/meniscus in the network. The recovery curve is extracted based on the measured volume of oil at the outlet of the ROC. We also provide the first indication that this oil-recovery trend realized at chip-level can be correlated to the flooding experiments related to actual reservoir cores. Hence, we have successfully demonstrated that the conceptualized 'Reservoir-on-a-Chip' has the features of a realistic pore-network and in principle is able to perform the necessary flooding experiments that are routinely done in reservoir engineering.

  8. Integrated reservoir and decision modeling to optimize spacing in unconventional gas reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Turkarslan, G.; McVay, D.A.; Ortiz, R.R. [Texas A and M Univ., College Station, TX (United States); Bickel, J.E.; Montiel, L.V. [Texas Univ., Austin, TX (United States)

    2010-07-01

    Unconventional gas plays are risky and operators must balance the need to conserve capital and protect the environment by avoiding over drilling with the desire to increase profitability. The purpose of this study was to develop technology and tools to help operators determine optimal well spacing in highly uncertain and risky unconventional gas reservoirs as quickly as possible. The paper presented a study that developed an integrated reservoir and decision modeling system that incorporated uncertainty. A Monte Carlo simulation was used to match and predict production performance in unconventional gas reservoirs. Simulation results were integrated with a Bayesian decision model that accounted for the risk facing operators. In order to determine optimal development strategies, these integrated tools were applied to a hypothetical case based on data from Deep Basin tight gas sands in Alberta. The paper provided background information on the Deep Basin Sands and the reservoir model. The Monte Carlo simulation and geostatistical analysis were presented. It was concluded that it is important to incorporate the lessons learned between development stages in unconventional gas reservoirs. 23 refs., 9 tabs., 16 figs.

  9. Quantification of Libby Reservoir Levels Needed to Maintain or Enhance Reservoir Fisheries, 1983-1987 Methods and Data Summary.

    Energy Technology Data Exchange (ETDEWEB)

    Chisholm, Ian

    1989-12-01

    Libby Reservoir was created under an International Columbia River Treaty between the United States and Canada for cooperative water development of the Columbia River Basin. The authorized purpose of the dam is to provide power, flood control, and navigation and other benefits. Research began in May 1983 to determine how operations of Libby dam impact the reservoir fishery and to suggest ways to lessen these impacts. This study is unique in that it was designed to accomplish its goal through detailed information gathering on every trophic level in the reservoir system and integration of this information into a quantitative computer model. The specific study objectives are to: quantify available reservoir habitat, determine abundance, growth and distribution of fish within the reservoir and potential recruitment of salmonids from Libby Reservoir tributaries within the United States, determine abundance and availability of food organisms for fish in the reservoir, quantify fish use of available food items, develop relationships between reservoir drawdown and reservoir habitat for fish and fish food organisms, and estimate impacts of reservoir operation on the reservoir fishery. 115 refs., 22 figs., 51 tabs.

  10. Application of TDS technique to developed reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Escobar, Freddy H.; Montealegre, Matilde [Petroleum Engineering Department, Universidad Surcolombiana, Av. Pastrana - Cra 1, Neiva (Huila-Colombia) (Colombia)

    2007-02-15

    Well test interpretation methods for a single well in infinite reservoirs may not be suitable for those wells when their pressure is affected by other wells operating in the same reservoir. This effect becomes more significant as both the flow rate and the test duration increase. It is observed in drawdown tests when the well experiences an additional pressure decline due to production from other wells and, also, when the well produces under pseudosteady state before shut-in it for a buildup test. When pressure data are interpreted as recorded, estimation of reservoir parameters may not be accurate. Slider1-3 introduced a technique for analyzing a pressure test that takes into account the effect of nearby active wells. Corrected or extrapolated pressures are obtained by applying the superposition principle to include the pressure decline contribution from the neighboring wells. Traditional semilog plots are then constructed and permeability and skin factor can be estimated, respectively, from the slope and intercept of their linear trend. A new technique, called TDS (Tiab's Direct Synthesis), was designed to analyze pressure and pressure derivative data without using type-curve matching. It uses characteristic features found on the derivative plot, so reservoir parameters are directly estimated. It depends upon how well the pressure derivative is calculated. If derivative is taken to the recorded pressure data the resulting curve will not be properly defined and the estimated parameters may be erroneous. Application of the TDS technique to wells in depleted reservoirs is presented here. The recorded pressure is extrapolated to include the contribution from other wells as suggested by Slider. Once the pressure derivative of the extrapolated data is taken, the TDS technique as discussed by Tiab [Tiab, D. 1993. Analysis of Pressure and Pressure Derivative without Type-Curve Matching: 1- Factor de dano and Wellbore Storage. J. Pet. Sci. Eng. 12 (1995), 171

  11. Characteristics of volcanic reservoirs and distribution rules of effective reservoirs in the Changling fault depression, Songliao Basin

    Directory of Open Access Journals (Sweden)

    Pujun Wang

    2015-11-01

    Full Text Available In the Songliao Basin, volcanic oil and gas reservoirs are important exploration domains. Based on drilling, logging, and 3D seismic (1495 km2 data, 546 sets of measured physical properties and gas testing productivity of 66 wells in the Changling fault depression, Songliao Basin, eruptive cycles and sub-lithofacies were distinguished after lithologic correction of the 19,384 m volcanic well intervals, so that a quantitative analysis was conducted on the relation between the eruptive cycles, lithologies and lithofacies and the distribution of effective reservoirs. After the relationship was established between lithologies, lithofacies & cycles and reservoir physical properties & oil and gas bearing situations, an analysis was conducted on the characteristics of volcanic reservoirs and the distribution rules of effective reservoirs. It is indicated that 10 eruptive cycles of 3 sections are totally developed in this area, and the effective reservoirs are mainly distributed at the top cycles of eruptive sequences, with those of the 1st and 3rd Members of Yingcheng Formation presenting the best reservoir properties. In this area, there are mainly 11 types of volcanic rocks, among which rhyolite, rhyolitic tuff, rhyolitic tuffo lava and rhyolitic volcanic breccia are the dominant lithologies of effective reservoirs. In the target area are mainly developed 4 volcanic lithofacies (11 sub-lithofacies, among which upper sub-lithofacies of effusive facies and thermal clastic sub-lithofacies of explosion lithofacies are predominant in effective reservoirs. There is an obvious corresponding relationship between the physical properties of volcanic reservoirs and the development degree of effective reservoirs. The distribution of effective reservoirs is controlled by reservoir physical properties, and the formation of effective reservoirs is influenced more by porosity than by permeability. It is concluded that deep volcanic gas exploration presents a good

  12. SEISMIC DETERMINATION OF RESERVOIR HETEROGENEITY: APPLICATION TO THE CHARACTERIZATION OF HEAVY OIL RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Matthias G. Imhof; James W. Castle

    2005-02-01

    The objective of the project was to examine how seismic and geologic data can be used to improve characterization of small-scale heterogeneity and their parameterization in reservoir models. The study focused on West Coalinga Field in California. The project initially attempted to build reservoir models based on different geologic and geophysical data independently using different tools, then to compare the results, and ultimately to integrate them all. We learned, however, that this strategy was impractical. The different data and tools need to be integrated from the beginning because they are all interrelated. This report describes a new approach to geostatistical modeling and presents an integration of geology and geophysics to explain the formation of the complex Coalinga reservoir.

  13. Geothermal reservoir engineering. 7. Reservoir simulator; Chinetsu choryuso kogaku. 7. Choryuso simulator

    Energy Technology Data Exchange (ETDEWEB)

    Ishido, T. [Geological Survey of Japan, Tsukuba (Japan)

    1998-09-15

    In modeling for actual geothermal reservoirs, the following basic functions are required for general-purpose numerical reservoir simulators: (1) Applicability to all hydrothermal single phase flow, steam single phase flow and hydrothermal-steam two phase flow, (2) Consideration of the effect of temperature and pressure on fluid physical properties such as coefficient of viscosity, (3) Assumption of Darcy`s law for flow every phase, (4) Assumption of heterogeneous properties of rocks, (5) Applicability to both transfer and convection of heat flow, and (6) Consideration of both mass and energy conservation laws. On the reservoir simulators, this paper outlines a dominant equation and its digitizing method and digitized solution, evaluation of the simulators, optional functions, and others. Numerical dispersion unavoidable for an advection diffusion problem is also explained. In addition, the basic equation and applications of a bore hole two-phase flow simulator are presented. 21 refs., 9 figs.

  14. SEISMIC DETERMINATION OF RESERVOIR HETEROGENEITY: APPLICATION TO THE CHARACTERIZATION OF HEAVY OIL RESERVOIRS

    Energy Technology Data Exchange (ETDEWEB)

    Matthias G. Imhof; James W. Castle

    2005-02-01

    The objective of the project was to examine how seismic and geologic data can be used to improve characterization of small-scale heterogeneity and their parameterization in reservoir models. The study focused on West Coalinga Field in California. The project initially attempted to build reservoir models based on different geologic and geophysical data independently using different tools, then to compare the results, and ultimately to integrate them all. Throughout the project, however, we learned that this strategy was impractical because the different data and model are complementary instead of competitive. For the complex Coalinga field, we found that a thorough understanding of the reservoir evolution through geologic times provides the necessary framework which ultimately allows integration of the different data and techniques.

  15. Oxygenation of Stratified Reservoir Using Air Bubble Plume

    Science.gov (United States)

    Schladow, S. G.

    2006-12-01

    Excess nutrients loading from urban area and watershed into lakes and reservoirs increases the content of organic matter, which, through decomposition, needs increased dissolve oxygen (DO). Many eutrophic reservoirs and lakes cannot meet the DO requirement during stratified season and suffers from the hypolimnetic anoxia. As a result, benthic sediment produces anoxic products such as methane, hydrogen sulphide, ammonia, iron, manganese, and phosphorus. In order to address the hypolimnetic anoxia, oxygen is artificially supplied into reservoir using an aeration system (i.e., bubbler). The most common result of lake/reservoir aeration is to destratify the reservoir so that the water body may completely mix under natural phenomena and remain well oxygenated throughout. Other advantages of destratification are: (1) allows warm- water fish to inhabit the entire reservoir, (2) suppress the nutrient release from sediment, and (3) decreases the algal growth by sending them to the darker zone. A one-dimensional reservoir-bubbler model is developed and applied to examine the effects of an aeration system on mixing and dissolved oxygen dynamics in the Upper Peirce Reservoir, Singapore. After introduction of the aeration system in the reservoir, it was found that the hypolimnetic DO increased significantly, and the concentration of algae, soluble manganese and iron substantially reduced. It is found that the reservoir-bubbler model predicts the mixing (temperature as mixing parameter) and dissolved oxygen concentration in the reservoir with acceptable accuracy. It is shown in terms of bubbler mechanical efficiency (i.e., operating cost) and total DO contribution from the aeration system into the reservoir that the selections of airflow rate per diffuser, air bubble radius, and total number of diffusers are important design criteria of a bubbler system. However, the overall bubbler design also depends on the reservoir size and stratified area of interest, ambient climate, and

  16. Stratum energy of coal-bed gas reservoir and their control on the coal-bed gas reservoir formation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Stratum energy of coal-bed gas reservoir, including coal-radix flexibility energy, groundwater flexibility energy and gas flexibility energy (hereinafter "three energy"), depends on the energy homeostasis system, the core process of which is the effective transfer of energy and the geological selective process. Combining with the mechanics experimentations of coal samples, different flexibility energy has been analyzed and researched quantificationally, and a profound discussion to their controls on the coal-bed gas reservoir formation has been made. It is shown that when gas reservoir is surrounded by edge water and bottom water, the deposited energy in the early phase of forming gas reservoir is mostly coal-radix and gas flexibility energy, but the effect of groundwater flexibility energy increases while water-body increases. The deposited energy in the middle and later phase of forming gas reservoir is mostly gas flexibility energy, which is greater than 80% of all deposited energy. In the whole process, larger groundwater body exerts greater influences on gas accumulation. The paper indicated that higher stratum energy is more propitious to forming coal-bed gas reservoir. And higher coal-radix flexibility energy and gas flexibility energy are more propitious to higher yield of gas reservoirs, while higher groundwater flexibility energy is more propitious to stable yield of gas reservoirs. Therefore, the key to evaluating the coal-bed gas reservoir formation is the stratum energy of coal-bed gas reservoir.

  17. Gypsy Field Project in Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    John P. Castagna; William J. Lamb; Carlos Moreno; Roger Young; Lynn Soreghan

    2000-09-19

    The objective of the Gypsy Project was to properly calculate seismic attributes and integrate these into a reservoir characterization project. Significant progress was made on the project in four areas. (1) Attenuation: In order for seismic inversion for rock properties or calculation of seismic attributes used to estimate rock properties to be performed validly, it is necessary to deal with seismic data that has had true amplitude and frequency content restored to account for earth filtering effects that are generally not included in seismic reservoir characterization methodologies. This requires the accurate measurement of seismic attenuation, something that is rarely achieved in practice. It is hoped that such measurements may also provide additional independent seismic attributes for use in reservoir characterization studies. In 2000, we were concerned with the ground truthing of attenuation measurements in the vicinity of wells. Our approach to the problem is one of extracting as time varying wavelet and relating temporal variations in the wavelet to an attenuation model of the earth. This method has the advantage of correcting for temporal variations in the reflectivity spectrum of the earth which confound the spectral ratio methodology which is the most commonly applied means of measuring attenuation from surface seismic data. Part I of the report describes our efforts in seismic attenuation as applied to the Gypsy data. (2) Optimal Attributes: A bewildering array of seismic attributes is available to the reservoir geoscientist to try to establish correlations to rock properties. Ultimately, the use of such a large number of degrees of freedom in the search for correlations with limited well control leads to common misapplication of statistically insignificant results which yields invalid predictions. Cross-validation against unused wells can be used to recognize such problems, but does not offer a solution to the question of which attributes should be used

  18. Green Methodologies to Test Hydrocarbon Reservoirs

    Directory of Open Access Journals (Sweden)

    Francesca Verga

    2010-01-01

    Full Text Available Problem statement: The definition and the economic viability of the best development strategy of a hydrocarbon reservoir mainly depend on the quantity and type of fluids and on the well productivity. Well testing, consisting in producing hydrocarbon to the surface while measuring the pressure variations induced in the reservoir, has been used for decades to determine the fluid nature and well potential. In exploration and appraisal scenarios the hydrocarbons produced during a test are flared, contributing to the emissions of greenhouse gases. Approach: Due to more stringent environmental regulations and a general need for reduced operating expenses, the current industry drivers in today’s formation evaluation methodologies demand short, safe, cost-effective and environmentally friendly test procedures, especially when conventional tests are prohibitively expensive, logistically not feasible or no surface emissions are allowed. Different methods have been proposed or resuscitated in the last years, such as wireline formation tests, closed chamber tests, production/reinjection tests and injection tests, as viable alternatives to conventional well testing. Results: While various short-term tests, test procedures and interpretation methods are apparently available for conducting successful tests without hydrocarbon production at the surface, clarity is lacking for specific applications of these techniques. An attempt to clarify advantages and limitations of each methodology, particularly with respect to the main testing target is pursued in this study. Specific insight is provided on injection testing, which is one of the most promising methodology to replace traditional well testing in reservoir characterization, except for the possibility to sample the formation fluids. Conclusion/Recommendations: Not a single one method but a combination of more methodologies, in particular injection testing and wireline formation testing, is the most promising

  19. The mechanics of shallow magma reservoir outgassing

    Science.gov (United States)

    Parmigiani, A.; Degruyter, W.; Leclaire, S.; Huber, C.; Bachmann, O.

    2017-08-01

    Magma degassing fundamentally controls the Earth's volatile cycles. The large amount of gas expelled into the atmosphere during volcanic eruptions (i.e., volcanic outgassing) is the most obvious display of magmatic volatile release. However, owing to the large intrusive:extrusive ratio, and considering the paucity of volatiles left in intrusive rocks after final solidification, volcanic outgassing likely constitutes only a small fraction of the overall mass of magmatic volatiles released to the Earth's surface. Therefore, as most magmas stall on their way to the surface, outgassing of uneruptible, crystal-rich magma storage regions will play a dominant role in closing the balance of volatile element cycling between the mantle and the surface. We use a numerical approach to study the migration of a magmatic volatile phase (MVP) in crystal-rich magma bodies ("mush zones") at the pore scale. Our results suggest that buoyancy-driven outgassing is efficient over crystal volume fractions between 0.4 and 0.7 (for mm-sized crystals). We parameterize our pore-scale results for MVP migration in a thermomechanical magma reservoir model to study outgassing under dynamical conditions where cooling controls the evolution of the proportion of crystal, gas, and melt phases and to investigate the role of the reservoir size and the temperature-dependent viscoelastic response of the crust on outgassing efficiency. We find that buoyancy-driven outgassing allows for a maximum of 40-50% volatiles to leave the reservoir over the 0.4-0.7 crystal volume fractions, implying that a significant amount of outgassing must occur at high crystal content (>0.7) through veining and/or capillary fracturing.

  20. Petroleum geochemical proxies for reservoir engineering parameters

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, B. [Petroleum Reservoir Group (PRG), Department of Geology and Geophysics, University of Calgary, 2500 University Drive NW, Calgary, Alberta (Canada); Lager, A. [NRG: School of Civil Engineering and Geosciences, Drummond Building, The University, Newcastle upon Tyne, NE1 7RU (United Kingdom); Potter, D.K.; Buckman, J.O. [Institute of Petroleum Engineering, Heriot-Watt University, Riccarton, Edinburgh, EH14 4AS (United Kingdom); Larter, S.R. [Petroleum Reservoir Group (PRG), Department of Geology and Geophysics, University of Calgary, 2500 University Drive NW, Calgary, Alberta (Canada); NRG: School of Civil Engineering and Geosciences, Drummond Building, The University, Newcastle upon Tyne, NE1 7RU (United Kingdom)

    2007-09-15

    The prediction of fluid flow behaviour in petroleum reservoirs is influenced by the physical and chemical processes active in interacting crude oil/brine/rock systems. It is usually not possible to assess these complex systems directly so proxies for molecular scale behaviour are needed. By their very nature, polar non-hydrocarbons are sensitive to fluid-rock interactions, and if properly exploited they may be utilised as proxies for describing reservoir engineering properties (e.g. wettability) that are also sensitive to fluid-rock interactions. We have identified a group of aromatic oxygen (alkylphenols and alkylfluorenones) and aromatic nitrogen (alkylcarbazoles) compounds present in petroleum that appear to respond to variations in fluid-rock properties. Here we describe the chemical and physical changes in a series of core samples obtained from North Sea reservoirs. A number of petrophysical parameters displayed strong correlations with polar non-hydrocarbon occurrence. For example, deflections in gamma ray logs in response to clay content in a coarsening upwards sandstone unit also showed similar deflections from a number of geochemical logs. A core-flood experiment was designed to monitor the chemical and physical changes during oil migration in a siltstone core. Following completion of the core-flood experiment, Environmental Scanning Electron Microscopy (ESEM) analysis of core samples indicated hydrophilic and hydrophobic surface tendencies grading throughout the core. The distributions of polar non-hydrocarbons (e.g. C{sub 0}-C{sub 3}-phenols) appear to correspond closely to the observed wettability alteration. The results confirm the potential for developing proxies for fluid-rock interactions through monitoring the surface active compounds present in the polar non-hydrocarbon fraction of petroleum. (author)

  1. Biofouling on Reservoir in Sea Water

    Science.gov (United States)

    Yoon, H.; Eom, C.; Kong, M.; Park, Y.; Chung, K.; Kim, B.

    2011-12-01

    The organisms which take part in marine biofouling are primarily the attached or sessile forms occurring naturally in the shallower water along the coast [1]. This is mainly because only those organisms with the ability to adapt to the new situations created by man can adhere firmly enough to avoid being washed off. Chemical and microbiological characteristics of the fouling biofilms developed on various surfaces in contact with the seawater were made. The microbial compositions of the biofilm communities formed on the reservoir polymer surfaces were tested for. The quantities of the diverse microorganisms in the biofilm samples developed on the prohibiting polymer reservoir surface were larger when there was no concern about materials for special selection for fouling. To confirm microbial and formation of biofilm on adsorbents was done CLSM (Multi-photon Confocal Laser Scanning Microscope system) analysis. Microbial identified using 16S rRNA. Experiment results, five species which are Vibrio sp., Pseudoalteromonas, Marinomonas, Sulfitobacter, and Alteromonas discovered to reservoir formed biofouling. There are some microorganism cause fouling and there are the others control fouling. The experimental results offered new specific information, concerning the problems in the application of new material as well as surface coating such as anti-fouling coatings. They showed the important role microbial activity in fouling and corrosion of the surfaces in contact with the any seawater. Acknowledgement : This research was supported by the national research project titled "The Development of Technology for Extraction of Resources Dissolved in Seawater" of the Korea Institute of Geoscience and Mineral Resources (KIGAM) funded by the Ministry of Land, Transport and Maritime Affairs. References [1] M. Y. Diego, K. Soren, and D. J. Kim. Prog. Org. Coat. 50, (2004) p.75-104.

  2. Perchlorate reduction by microbes inhabiting oil reservoirs

    Science.gov (United States)

    Liebensteiner, Martin; Stams, Alfons; Lomans, Bart

    2014-05-01

    Microbial perchlorate and chlorate reduction is a unique type of anaerobic respiration as during reduction of (per)chlorate chlorite is formed, which is then split into chloride and molecular oxygen. In recent years it was demonstrated that (per)chlorate-reducing bacteria may employ oxygenase-dependent pathways for the degradation of aromatic and aliphatic hydrocarbons. These findings suggested that (per)chlorate may be used as oxygen-releasing compound in anoxic environments that contain hydrocarbons, such as polluted soil sites and oil reservoirs. We started to study perchlorate reduction by microbes possibly inhabiting oil reservoirs. One of the organisms studied was Archaeoglobus fulgidus. This extremely thermophilic archaeon is known as a major contributor to souring in hot oil reservoirs. A. fulgidus turned out to be able to use perchlorate as terminal electron acceptor for growth with lactate (Liebensteiner et al 2013). Genome based physiological experiments indicated that A. fulgidus possesses a novel perchlorate reduction pathway. Perchlorate is first reduced to chlorite, but chlorite is not split into chloride and molecular oxygen as occurs in bacteria. Rather, chlorite reacts chemically with sulfide, forming oxidized sulfur compounds, which are reduced to sulfide in the electron transport chain by the archaeon. The dependence of perchlorate reduction on sulfur compounds could be shown. The implications of our findings as novel strategy for microbiological enhanced oil recovery and for souring mitigation are discussed. Liebensteiner MG, Pinkse MWH, Schaap PJ, Stams AJM and Lomans BP (2013) Archaeal (per)chlorate reduction at high temperature, a matter of abiotic-biotic reactions. Science 340: 85-87

  3. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1992-01-31

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  4. Dams, reservoirs, and withdrawals for water supply; historic trends

    Science.gov (United States)

    Langbein, W.B.

    1982-01-01

    The U.S. Geological Survey (USGS) from time to time has published an inventory of major reservoirs and controlled natural lakes. The latest available USGS report indicated that as of 1963, usable capacity in major reservoirs (those having 5 ,000 acre-ft of usable capacity) totaled 359 million acre-ft. The growth rate for total capacity averaged about 80%/decade until the early 1960's. Since then, reservoir capacity has increased at a markedly slower rate, the effects of approaching an asymptotic limit on capacity in some areas, compounded, by increasing public aversion toward reservoir construction. The trend toward non-structural measures places greater dependence on management skill and on better forecasts. At some point, the potentials of conservation and better management will become less effective than reservoirs and there will again be an upward trend in reservoir capacity. (Lantz-PTT)

  5. Application of a Delumping Procedure to Compositional Reservoir Simulations

    DEFF Research Database (Denmark)

    Stenby, Erling Halfdan; Christensen, Jes Reimer; Knudsen, K.

    1996-01-01

    Characterization and lumping are always performed when dealing with reservoir fluids. The number of pseudocomponents in a compositional reservoir simulation is normally between three and eight. In order to optimize the reservoir performance, it is necessary to know a detailed composition...... of the product stream from the reservoir. This paper deals with the problems of how to come from the lumped system (for which the reservoir simulation was performed) to a description of the full system (which is important in order to optimize the down-stream facilities). The equations of the delumping procedure...... are shown and the application of the method is illustrated through examples, including a constant volume depletion experiment and the fifth SPE Comparative example with a fluid description from a North Sea reservoir (with the calculated composition after a lumping, an experiment and a delumping...

  6. Reservoirs of non-baumannii Acinetobacter species

    Directory of Open Access Journals (Sweden)

    Ahmad eAl Atrouni

    2016-02-01

    Full Text Available Acinetobacter spp are ubiquitous gram negative and non fermenting coccobacilli that have the ability to occupy several ecological niches including environment, animals and human. Among the different species, Acinetobacter baumannii has evolved as global pathogen causing wide range of infection. Since the implementation of molecular techniques, the habitat and the role of non baumannii Acinetobacter in human infection have been elucidated. In addition, several new species have been described. In the present review, we summarize the recent data about the natural reservoir of non-baumannii Acinetobacter including the novel species that have been described for the first time from environmental sources and reported during the last years.

  7. Transient pressure analysis in composite reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Tang, R.W.K.; Brigham, W.E.

    1982-08-01

    The problem of fluid flow in a radially composite reservoir is discussed. Recently published was the most general analytic solution available thus far. That analytic solution is analyzed, and the results are presented. The solution is dependent upon the following dimensionless parameters (if well-bore storage and skin effect are neglected): (1) dimensionless time based on the discontinuity radius, (2) the dimensionless discontinuity radius, (3) the mobility ratio, and (4) the diffusivity ratio. The range of parameters used in generating the results include dimensionless radius time of 0.01 t

  8. Studies of reservoir hosts for Marburg virus.

    Science.gov (United States)

    Swanepoel, Robert; Smit, Sheilagh B; Rollin, Pierre E; Formenty, Pierre; Leman, Patricia A; Kemp, Alan; Burt, Felicity J; Grobbelaar, Antoinette A; Croft, Janice; Bausch, Daniel G; Zeller, Hervé; Leirs, Herwig; Braack, L E O; Libande, Modeste L; Zaki, Sherif; Nichol, Stuart T; Ksiazek, Thomas G; Paweska, Janusz T

    2007-12-01

    To determine reservoir hosts for Marburg virus (MARV), we examined the fauna of a mine in northeastern Democratic Republic of the Congo. The mine was associated with a protracted outbreak of Marburg hemorrhagic fever during 1998-2000. We found MARV nucleic acid in 12 bats, comprising 3.0%-3.6% of 2 species of insectivorous bat and 1 species of fruit bat. We found antibody to the virus in the serum of 9.7% of 1 of the insectivorous species and in 20.5% of the fruit bat species, but attempts to isolate virus were unsuccessful.

  9. Reservoir-engineered entanglement in optomechanical systems.

    Science.gov (United States)

    Wang, Ying-Dan; Clerk, Aashish A

    2013-06-21

    We show how strong steady-state entanglement can be achieved in a three-mode optomechanical system (or other parametrically coupled bosonic system) by effectively laser cooling a delocalized Bogoliubov mode. This approach allows one to surpass the bound on the maximum stationary intracavity entanglement possible with a coherent two-mode squeezing interaction. In particular, we find that optimizing the relative ratio of optomechanical couplings, rather than simply increasing their magnitudes, is essential for achieving strong entanglement. Unlike typical dissipative entanglement schemes, our results cannot be described by treating the effects of the entangling reservoir via a Linblad master equation.

  10. Secure information transfer based on computing reservoir

    Science.gov (United States)

    Szmoski, R. M.; Ferrari, F. A. S.; de S. Pinto, S. E.; Baptista, M. S.; Viana, R. L.

    2013-04-01

    There is a broad area of research to ensure that information is transmitted securely. Within this scope, chaos-based cryptography takes a prominent role due to its nonlinear properties. Using these properties, we propose a secure mechanism for transmitting data that relies on chaotic networks. We use a nonlinear on-off device to cipher the message, and the transfer entropy to retrieve it. We analyze the system capability for sending messages, and we obtain expressions for the operating time. We demonstrate the system efficiency for a wide range of parameters. We find similarities between our method and the reservoir computing.

  11. Reservoirs of Non-baumannii Acinetobacter Species.

    Science.gov (United States)

    Al Atrouni, Ahmad; Joly-Guillou, Marie-Laure; Hamze, Monzer; Kempf, Marie

    2016-01-01

    Acinetobacter spp. are ubiquitous gram negative and non-fermenting coccobacilli that have the ability to occupy several ecological niches including environment, animals and human. Among the different species, Acinetobacter baumannii has evolved as global pathogen causing wide range of infection. Since the implementation of molecular techniques, the habitat and the role of non-baumannii Acinetobacter in human infection have been elucidated. In addition, several new species have been described. In the present review, we summarize the recent data about the natural reservoir of non-baumannii Acinetobacter including the novel species that have been described for the first time from environmental sources and reported during the last years.

  12. Minimum Reservoir Water Level in Hydropower Dams

    Science.gov (United States)

    Sarkardeh, Hamed

    2017-07-01

    Vortex formation over the intakes is an undesirable phenomenon within the water withdrawal process from a dam reservoir. Calculating the minimum operating water level in power intakes by empirical equations is not a safe way and sometimes contains some errors. Therefore, current method to calculate the critical submergence of a power intake is construction of a scaled physical model in parallel with numerical model. In this research some proposed empirical relations for prediction of submergence depth in power intakes were validated with experimental data of different physical and numerical models of power intakes. Results showed that, equations which involved the geometry of intake have better correspondence with the experimental and numerical data.

  13. Studies of Reservoir Hosts for Marburg virus

    DEFF Research Database (Denmark)

    Swanepoel, Robert; Smit, Sheilagh B; Rollin, Pierre E

    2007-01-01

    To determine reservoir hosts for Marburg virus (MARV), we examined the fauna of a mine in northeastern Democratic Republic of the Congo. The mine was associated with a protracted outbreak of Marburg hemorrhagic fever during 1998-2000. We found MARV nucleic acid in 12 bats, comprising 3.0%-3.6% of 2...... species of insectivorous bat and 1 species of fruit bat. We found antibody to the virus in the serum of 9.7% of 1 of the insectivorous species and in 20.5% of the fruit bat species, but attempts to isolate virus were unsuccessful. ...

  14. Zooplankton assemblage of Oyun Reservoir, Offa, Nigeria

    Directory of Open Access Journals (Sweden)

    Moshood K Mustapha

    2009-12-01

    Full Text Available The influence of physico-chemical properties of Oyun Reservoir, Offa, Nigeria (a shallow tropical African reservoir on its zooplankton composition and abundance were investigated at three stations for two years between January 2002 and December 2003. Diversity is not high: only three groups of zooplankton were found: Rotifera with eight genera; and Cladocera and Copepoda with three genera each. Rotifera dominated numerically (71.02%, followed by Cladocera (16.45% and Copepoda (12.53%. The zooplankton was more prevalent during the rainy season, and there were variations in the composition and abundance along the reservoir continuum. Factors such as temperature, nutrients, food availability, shape and hydrodynamics of the reservoir, as well as reproductive strategies of the organisms, strongly influence the generic composition and population density of zooplankton. Prevention of ecological deterioration of the water body would greatly should result in a more productive water body, rich in zooplankton and with better fisheries. Rev. Biol. Trop. 57 (4: 1027-1047. Epub 2009 December 01.La influencia de las propiedades fisicoquímicas del Reservorio Oyun, Offa, Nigeria (un embalse tropical somero sobre la composición y abundancia del zooplancton fue investigada en tres estaciones entre enero de 2002 y diciembre de 2003. La diversidad no resultó muy alta con tres grupos de zooplancton: Rotifera con ocho géneros, y Cladocera y Copepoda con tres géneros cada uno. Rotifera dominó (71.02%, seguido de Cladocera (16.45% y Copepoda (12.53%. El zooplancton fue más común durante la temporada de lluvias, y hubo variaciones en su composición y abundancia a lo largo del embalse. Factores tales como la temperatura, los nutrientes, la disponibilidad de alimentos, la forma y la hidrodinámica del embalse, así como las estrategias reproductivas de los organismos, influyen fuertemente en la composición genérica y la densidad poblacional del zooplancton. La

  15. Innovative MIOR Process Utilizing Indigenous Reservoir Constituents

    Energy Technology Data Exchange (ETDEWEB)

    Hitzman, D.O.; Stepp, A.K.

    2003-02-11

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions for improving oil production. The goal was to identify indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with inorganic nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. The potential of the system will be illustrated and demonstrated by the example of biopolymer production on oil recovery.

  16. Study of Dieldrin in Coralville Reservoir

    Directory of Open Access Journals (Sweden)

    Jeremy Smith

    2013-01-01

    Full Text Available Using existing experimental data taken over a period of roughly 12 years that documents the concentrations of dieldrin levels in the environment and fatty tissue of the fish, we construct a model of the total dieldrin concentration decline. Comparisons between the experimental data and speculative data can be made using calculus and elements of statistics in order to better understand the movement of dieldrin in the reservoir. Because of the potentially harmful exposure effects of dieldrin to humans as well as the environment, it is important to be able to predict when stability has been restored to the ecosystem.

  17. Work producing reservoirs: Stochastic thermodynamics with generalized Gibbs ensembles

    Science.gov (United States)

    Horowitz, Jordan M.; Esposito, Massimiliano

    2016-08-01

    We develop a consistent stochastic thermodynamics for environments composed of thermodynamic reservoirs in an external conservative force field, that is, environments described by the generalized or Gibbs canonical ensemble. We demonstrate that small systems weakly coupled to such reservoirs exchange both heat and work by verifying a local detailed balance relation for the induced stochastic dynamics. Based on this analysis, we help to rationalize the observation that nonthermal reservoirs can increase the efficiency of thermodynamic heat engines.

  18. Approximate solutions for fractured wells producing layered reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, C.O.; Reynolds, A.C.; Raghavan, R.

    1983-01-01

    New analytical solutions for the response at a well intercepting a layered reservoir are derived. The well is assumed to produce at a constant rate or at a constant pressure. Reservoir systems with and without interlayer communication were examined. The utility of these solutions is documented. An increased physical understanding of fractured wells in layered reservoirs was obtained from these solutions. The influence of vertical variations in fracture conductivity is considered also. 15 references.

  19. Approximate solutions for fractured wells producing layered reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, C.O.; Camacho-V., R; Raghavan, R.; Reynolds, A.C.

    1985-10-01

    New analytical solutions for the response at a well intercepting a layered reservoir are derived. The well is assumed to produce at a constant rate or a constant pressure. We examine reservoir systems without interlayer communication and document the usefulness of these solutions, which enable us to obtain increased physical understanding of the performance of fractured wells in layered reservoirs. The influence of vertical variations in fracture conductivity is also considered. Example applications of the approximations derived here are also presented.

  20. Geothermal Reservoir Technology Research Program: Abstracts of selected research projects

    Energy Technology Data Exchange (ETDEWEB)

    Reed, M.J. (ed.)

    1993-03-01

    Research projects are described in the following areas: geothermal exploration, mapping reservoir properties and reservoir monitoring, and well testing, simulation, and predicting reservoir performance. The objectives, technical approach, and project status of each project are presented. The background, research results, and future plans for each project are discussed. The names, addresses, and telephone and telefax numbers are given for the DOE program manager and the principal investigators. (MHR)

  1. MATHEMATICAL MODEL OF RIVER BED CHANGE DOWNSTREAM OF XIAOLANGDI RESERVOIR

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A mathematical model of river bed change downstream of the Xiaolangdi Reservoir was developed based on the most recent achievement of sediment theory in the Yellow River. The model was verified by the comparison of computed results and measured data from 1986 to 1996. Numerical prediction of the erosion and deposition downstream of the Xiaolangdi Reservoir in its first operation year was carried out, and a series of suggestions were given for reservoir operation mode in its early operation period.

  2. Numerical study of reservoir cooling by means of peltier effect

    OpenAIRE

    Farias, Rodrigo Martins; Santos, Elizaldo Domingues dos; Isoldi, Liércio André; Rocha, Luiz Alberto Oliveira

    2008-01-01

    The present work studies numerically and experimentally the water cooling process by means of natural convection inside a closed reservoir. The cooling process is performed by Peltier or Thermoelectric effect. The purpose here is to obtain the thermal gradient inside the reservoir and to search for the best point where the coldest water can be extracted from the reservoir, which can be considered a geometric optimization of the device thermal design. The analyzed flow is incompressible, lamin...

  3. Petrophysical simulation in petroleum geology and reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    Buryakovsky, L.; Chilingar, G. [Russian Academy of Natural Sciences, USA Branch, Los Angeles, CA (United States)

    2005-10-21

    The simulation of multivariate petrophysical relationships between core and well-log derived parameters on the example of the South Caspian Basin is discussed. For developing the petrophysical relationships, a number of deterministic and stochastic calculating procedures are used by the authors. These relationships are widely used in petroleum geology and reservoir engineering for hydrocarbon reserves estimation, reservoir description and simulation, field development planning, and reservoir production management. (author)

  4. Phytoplankton and water quality in a Mediterranean drinking-water reservoir (Marathonas Reservoir, Greece).

    Science.gov (United States)

    Katsiapi, Matina; Moustaka-Gouni, Maria; Michaloudi, Evangelia; Kormas, Konstantinos Ar

    2011-10-01

    Phytoplankton and water quality of Marathonas drinking-water Reservoir were examined for the first time. During the study period (July-September 2007), phytoplankton composition was indicative of eutrophic conditions although phytoplankton biovolume was low (max. 2.7 mm³ l⁻¹). Phytoplankton was dominated by cyanobacteria and diatoms, whereas desmids and dinoflagellates contributed with lower biovolume values. Changing flushing rate in the reservoir (up to 0.7% of reservoir's water volume per day) driven by water withdrawal and occurring in pulses for a period of 15-25 days was associated with phytoplankton dynamics. Under flushing pulses: (1) biovolume was low and (2) both 'good' quality species and the tolerant to flushing 'nuisance' cyanobacterium Microcystis aeruginosa dominated. According to the Water Framework Directive, the metrics of phytoplankton biovolume and cyanobacterial percentage (%) contribution indicated a moderate ecological water quality. In addition, the total biovolume of cyanobacteria as well as the dominance of the known toxin-producing M. aeruginosa in the reservoir's phytoplankton indicated a potential hazard for human health according to the World Health Organization.

  5. Quantifying the robustness of optimal reservoir operation for the Xinanjiang-Fuchunjiang Reservoir Cascade

    NARCIS (Netherlands)

    Vonk, E.; Xu, YuePing; Booij, Martijn J.; Augustijn, Dionysius C.M.

    2016-01-01

    In this research we investigate the robustness of the common implicit stochastic optimization (ISO) method for dam reoperation. As a case study, we focus on the Xinanjiang-Fuchunjiang reservoir cascade in eastern China, for which adapted operating rules were proposed as a means to reduce the impact

  6. Reservoir-on-a-Chip (ROC): A new paradigm in reservoir engineering

    NARCIS (Netherlands)

    Kumar Gunda, N.S.; Bera, B.; Karadimitriou, N.K.; Mitra, S.K.; Hassanizadeh, S.M.

    2011-01-01

    In this study, we design a microfluidic chip, which represents the pore structure of a naturally occurring oil-bearing reservoir rock. The pore-network has been etched in a silicon substrate and bonded with a glass covering layer to make a complete microfluidic chip, which is termed as

  7. Quantifying the robustness of optimal reservoir operation for the Xinanjiang-Fuchunjiang Reservoir Cascade

    NARCIS (Netherlands)

    Vonk, E.; Xu, Y.P.; Booij, M.J.; Augustijn, D.C.M.

    2016-01-01

    In this research we investigate the robustness of the common implicit stochastic optimization (ISO) method for dam reoperation. As a case study, we focus on the Xinanjiang-Fuchunjiang reservoir cascade in eastern China, for which adapted operating rules were proposed as a means to reduce the impact

  8. A Method to Recover Useful Geothermal-Reservoir Parameters from Production Characteristic Curves (1) Steam Reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Iglesias, E.; Arellano, V.; Garfias, A.; Miranda, C.; Hernandez, J.; Gonzalez, J.

    1983-12-15

    In this paper we develop and demonstrate a method to estimate the reservoir pressure and a productivity index for vertical steam wells, from its production characteristic (also called output) curves. In addition, the method allows to estimate the radius of influence of the well, provided that a value of the reservoir transmisivity is available. The basic structure of the present method is: first, the measured well head mass flowrates and pressures are transformed to downhole conditions by means of a numerical simulator; then, the computed downhole variables are fitted to a simple radial model that predicts the sandface flowrate in terms of the flowing pressure. For demonstration, the method was applied to several steam wells from the Los Azufres Geothermal field. We found excellent agreement of the model with this ample set of field data. As a bonus, the processed data allowed several inferences about the steam producing zone of the reservoir: that the wells considered produce from relatively isolated pockets of steam, which are probably fed by near-by inmobile water; and that these feed zones are in poor hydraulic communication with the field surface waters. our method are that it provides a way to retrieve important reservoir information from usually available production characteristic curves, and that the method works from easily and accurately taken wellhead measurements.

  9. When and how to activate large new hydropower reservoirs

    Science.gov (United States)

    Geressu, Robel; Harou, Julien

    2016-04-01

    Water resources system planners are increasingly required to address multiple long and short-term management objectives and the trade-offs these imply. Expansion planning in hydropower reservoir systems, where assets either temporarily or permanently reduce each other's performance, is a complex and potentially conflictual task requiring attention to multiple impacts. This paper proposes a multi-criteria scheduling approach considering many objectives and their associated uncertainties. The method considers the coordination and flexibility of reservoir operation in different expansion stages. The impact of abstraction (i.e., during filling of new reservoirs) and regulation of inflows by upstream reservoirs, is represented by simultaneously optimizing the storage size of reservoirs. Sensitivity analysis of performance given financial uncertainty and hydrological variability reveals which expansion schedules are robust to a wide range of future conditions. This informs how alternative designs compare in multiple performance dimensions and can serve stakeholders with differing attitudes towards risk and opportunity. The method is applied to proposed Blue Nile hydropower reservoirs to find efficient new dam activation schedules considering energy revenues, downstream release requirements, and energy generation during reservoir filling periods. Results take the form of Pareto-optimal trade-offs where each point on the curve or surface represents asset choices, size, activation date, and filling period reservoir operating rules. The results help explore the complex planning and management issues involved in the Blue Nile and demonstrate a possible approach to negotiate the design, filling and coordinated use of hydropower reservoirs.

  10. Development of a framework for optimization of reservoir simulation studies

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiang; Delshad, Mojdeh; Sepehrnoori, Kamy [The University of Texas at Austin, Austin, TX (United States)

    2007-10-15

    We have developed a framework that distributes multiple reservoir simulations on a cluster of CPUs for fast and efficient process optimization studies. This platform utilizes several commercial reservoir simulators for flow simulations, an experimental design and a Monte Carlo algorithm with a global optimization search engine to identify the optimum combination of reservoir decision factors under uncertainty. This approach is applied to a well placement design for a field-scale development exercise. The uncertainties considered are in the fault structure, porosity and permeability, PVT, and relative permeabilities. The results indicate that the approach is practical and efficient for performing reservoir optimization studies. (author)

  11. Effects of water-supply reservoirs on streamflow in Massachusetts

    Science.gov (United States)

    Levin, Sara B.

    2016-10-06

    State and local water-resource managers need modeling tools to help them manage and protect water-supply resources for both human consumption and ecological needs. The U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, has developed a decision-support tool to estimate the effects of reservoirs on natural streamflow. The Massachusetts Reservoir Simulation Tool is a model that simulates the daily water balance of a reservoir. The reservoir simulation tool provides estimates of daily outflows from reservoirs and compares the frequency, duration, and magnitude of the volume of outflows from reservoirs with estimates of the unaltered streamflow that would occur if no dam were present. This tool will help environmental managers understand the complex interactions and tradeoffs between water withdrawals, reservoir operational practices, and reservoir outflows needed for aquatic habitats.A sensitivity analysis of the daily water balance equation was performed to identify physical and operational features of reservoirs that could have the greatest effect on reservoir outflows. For the purpose of this report, uncontrolled releases of water (spills or spillage) over the reservoir spillway were considered to be a proxy for reservoir outflows directly below the dam. The ratio of average withdrawals to the average inflows had the largest effect on spillage patterns, with the highest withdrawals leading to the lowest spillage. The size of the surface area relative to the drainage area of the reservoir also had an effect on spillage; reservoirs with large surface areas have high evaporation rates during the summer, which can contribute to frequent and long periods without spillage, even in the absence of water withdrawals. Other reservoir characteristics, such as variability of inflows, groundwater interactions, and seasonal demand patterns, had low to moderate effects on the frequency, duration, and magnitude of spillage. The

  12. Reservoir engineering. 1995 SPE annual technical conference and exhibition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    This document contains the proceedings of the Annual Technical Conference and Exhibition of the Society of Petroleum Engineers which was held on October 22-25, 1995 in Dallas, Texas. This volume contains the presentations regarding Reservoir Engineering. The topics covered in these presentations include: resource management and reservoir engineering of oil, natural gas and gas condensate fields, mathematical models and computerized simulation of fluid flow in reservoir rock, geochemistry of reservoir fluids, and enhanced recovery of oil and natural gas using waterflooding and other secondary recovery methods.

  13. Reservoir Engineering Studies of Geopressured Geothermal Energy Resource

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kun Sang [Kyonggi University, Suwon (Korea)

    1998-04-30

    Transient pressure analysis techniques were used to evaluate the performance of the Gladys McCall geopressured-geothermal reservoir which has been monitored and tested under U.S. Department of Energy geopressured -geothermal research program. Analysis of transient pressure data furnished a reservoir description such as the formation parameters, pore volume and shape of the reservoir, and average reservoir pressure. Results of pressure tests suggest that the Gladys McCall reservoir probably has a long narrow shape with the well located off-center. During both production and shut-in periods, pressure buildup tests indicated some degree of external pressure support. Aquifer recharging was believed to be the main source. An aquifer influx model was derived from a conceptual model of water leakage through a partially sealing fault into the reservoir under steady-state conditions. Moreover, a match of the pressure history required that the conductivity of the fault be a function of the pressure difference between the supporting aquifer and the reservoir. Results of analyses provided a quantitative evaluation of the reservoir and a better understanding of the reservoir energy drive mechanism. (author). 14 refs., 1 tab., 4 figs.

  14. Improved seismic inversion for mapping pre-chalk reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Moerch Pedersen, J.

    1999-08-01

    The project has demonstrated the use of an integrated reservoir characterisation technique on data from the West Lulu Middle Jurassic reservoir. It has been demonstrated how impedance derived from seismic data through seismic inversion can improve the reservoir characterisation. In this case with a modest well database so the introduction of the seismic impedance narrows the possible solutions with respect to reservoir architecture. The seismic inversion method has furthermore been improved with the implementation of time variable wavelet, an important new feature for cases where the target is below the deepest well or when large time window is inverted. (au)

  15. The Upper Limit Size of Reservoir-Induced Earthquakes

    Institute of Scientific and Technical Information of China (English)

    Huang Fuqiong; Zhang Yan; Wu Zhongliang; Ma Lijie

    2008-01-01

    We showed the relation between the magnitude of induced earthquake and the reservoir storage and dam height based on the global catalog from 1967 to 1989 compiled by Ding Yuanzhang (1989). By multiplying reservoir storage with dam height, we introduced a new parameter named EE. We found that the cases with specific EE and magnitude do not exceed a limit. Based on the discussion of its physics, we called EE the equivalent energy. We considered this limit as the upper limit of magnitude for reservoir-induced earthquakes. The result was proved by the recent cases occurring in China. This size limitation can be used as a helpful consideration for reservoir design.

  16. Overtopping of Rubble Mound Breakwaters with Front Reservoir

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Andersen, Thomas Lykke

    2007-01-01

    The design and performance of breakwaters with front reservoir are discussed on the basis of physical 2-D model tests with a number of cross sections, in which vertopping discharge and spatial distribution, wave forces on inner parapet walls, and stability of reservoir armour were studied....... The sensitivity of these quantities to the width of the reservoir is discussed. It is demonstrated that front reservoir solutions are more economical than conventional cross section solutions, such as bermed structures and mild slope structures, in cases where low crests and small overtopping discharges...

  17. CO2 emissions from German drinking water reservoirs.

    Science.gov (United States)

    Saidi, Helmi; Koschorreck, Matthias

    2017-03-01

    Globally, reservoirs are a significant source of atmospheric CO2. However, precise quantification of greenhouse gas emissions from drinking water reservoirs on the regional or national scale is still challenging. We calculated CO2 fluxes for 39 German drinking water reservoirs during a period of 22years (1991-2013) using routine monitoring data in order to quantify total emission of CO2 from drinking water reservoirs in Germany and to identify major drivers. All reservoirs were a net CO2 source with a median flux of 167gCm(-2)y(-1), which makes gaseous emissions a relevant process for the carbon budget of each reservoir. Fluxes varied seasonally with median fluxes of 13, 48, and 201gCm(-2)y(-1) in spring, summer, and autumn respectively. Differences between reservoirs appeared to be primarily caused by the concentration of CO2 in the surface water rather than by the physical gas transfer coefficient. Consideration of short term fluctuations of the gas transfer coefficient due to varying wind speed had only a minor effect on the annual budgets. High CO2 emissions only occurred in reservoirs with pHCO2 emissions correlated exponentially with pH but not with dissolved organic carbon (DOC). There was significant correlation between land use in the catchment and CO2 emissions. In total, German drinking water reservoirs emit 44000t of CO2 annually, which makes them a negligible CO2 source (CO2 emissions) in Germany.

  18. Entanglement trapping in a non-stationary structured reservoir

    CERN Document Server

    Lazarou, C; Maniscalco, S; Piilo, J; Garraway, B M

    2012-01-01

    We study a single two-level atom interacting with a reservoir of modes defined by a reservoir structure function with a frequency gap. Using the pseudomodes technique, we derive the main features of a trapping state formed in the weak coupling regime. Utilising different entanglement measures we show that strong correlations and entanglement between the atom and the modes are in existence when this state is formed. Furthermore, an unexpected feature for the reservoir is revealed. In the long time limit and for weak coupling the reservoir spectrum is not constant in time.

  19. Spatial Stochastic Point Models for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Syversveen, Anne Randi

    1997-12-31

    The main part of this thesis discusses stochastic modelling of geology in petroleum reservoirs. A marked point model is defined for objects against a background in a two-dimensional vertical cross section of the reservoir. The model handles conditioning on observations from more than one well for each object and contains interaction between objects, and the objects have the correct length distribution when penetrated by wells. The model is developed in a Bayesian setting. The model and the simulation algorithm are demonstrated by means of an example with simulated data. The thesis also deals with object recognition in image analysis, in a Bayesian framework, and with a special type of spatial Cox processes called log-Gaussian Cox processes. In these processes, the logarithm of the intensity function is a Gaussian process. The class of log-Gaussian Cox processes provides flexible models for clustering. The distribution of such a process is completely characterized by the intensity and the pair correlation function of the Cox process. 170 refs., 37 figs., 5 tabs.

  20. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Pennington, Wayne D.; Acevedo, Horacio; Green, Aaron; Len, Shawn; Minavea, Anastasia; Wood, James; Xie, Deyi

    2002-01-29

    This project has completed the initially scheduled third year of the contract, and is beginning a fourth year, designed to expand upon the tech transfer aspects of the project. From the Stratton data set, demonstrated that an apparent correlation between attributes derived along `phantom' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the Boonsville data set , developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into productive and non-productive subfacies, and developed a method involving cross-correlation of seismic waveforms to provide a reliable map of the various facies present in the area. The Teal South data set provided a surprising set of data, leading us to develop a pressure-dependent velocity relationship and to conclude that nearby reservoirs are undergoing a pressure drop in response to the production of the main reservoir, implying that oil is being lost through their spill points, never to be produced. The Wamsutter data set led to the use of unconventional attributes including lateral incoherence and horizon-dependent impedance variations to indicate regions of former sand bars and current high pressure, respectively, and to evaluation of various upscaling routines.

  1. Twentieth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    None

    1995-01-26

    PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

  2. Radiographic markers - A reservoir for bacteria?

    Energy Technology Data Exchange (ETDEWEB)

    Tugwell, Jenna, E-mail: jenna.tugwell@googlemail.co [Department of Radiology, Ysbyty Gwynedd Hospital, Bangor, North Wales (United Kingdom); Maddison, Adele [Nuffield Health, Shrewsbury Hospital (United Kingdom)

    2011-05-15

    Introduction: Amongst the most frequently handled objects in the radiology department are radiographic markers. They are personal accessories used with every patient, and are kept in the radiographers pockets when not utilised. Upon enquiry it was discovered that many radiographers disregarded the potential of these accessories to become a vector for cross-contamination thus never or rarely clean them. The aims of this study were therefore to identify if radiographic markers are a reservoir for bacteria and to establish an effective cleaning method for decontaminating them. Methodology: 25 radiographers/student radiographers were selected for this study. Swabbing of their markers prior and post cleaning took place. The microbiology laboratory subsequently analyzed the results by quantifying and identifying the bacteria present. The participants also completed a closed questionnaire regarding their markers (e.g. frequency of cleaning and type of marker) to help specify the results gained from the swabbing procedure. Results: From the sample swabbed, 92% were contaminated with various organisms including Staphylococcus and Bacillus species, the amount of bacteria present ranged from 0 to >50 CFU. There were no significant differences between disinfectant wipes and alcohol gel in decontaminating the markers. Both successfully reduced their bacterial load, with 80% of the markers post cleaning having 0 CFU. Conclusion: The results indicated that radiographic markers can become highly contaminated with various organisms thus serve as a reservoir for bacteria. In addition, the markers need to be cleaned on a regular basis, with either disinfectant wipes or alcohol gel to reduce their bacterial load.

  3. Environmental impact analysis of mine tailing reservoir

    Science.gov (United States)

    Gong, J. Z.

    2016-08-01

    Under certain conditions landscape topography which utilizes mine tailing reservoir construction using is likely to increase lateral recharge source regions, resulting in dramatic changes to the local hydrological dynamic field and recharge of downstream areas initiated by runoff, excretion state, elevated groundwater depth, shallow groundwater, rainfall direct communication, and thinning of the vadose zone. Corrosive leaching of topsoil over many years of exposure to chemical fertilizers and pesticides may result in their dissolution into the groundwater system, which may lead to excessive amounts of many harmful chemicals, therby affecting the physical and mental health of human residents and increase environmental vulnerability and risk associated with the water and soil. According to field survey data from Yujiakan, Qian'an City, and Hebei provinces, this paper analyzes the hydrogeological environmental mechanisms of areas adjacent to mine tailing reservoirs and establishes a conceptual model of the local groundwater system and the concentration-response function between NO3 - content in groundwater and the incidence of cancer in local residents.

  4. INNOVATIVE MIOR PROCESS UTILIZING INDIGENOUS RESERVOIR CONSTITUENTS

    Energy Technology Data Exchange (ETDEWEB)

    D.O. Hitzman; A.K. Stepp; D.M. Dennis; L.R. Graumann

    2003-09-01

    This research program was directed at improving the knowledge of reservoir ecology and developing practical microbial solutions and technologies for improving oil production. The goal was to identify and utilize indigenous microbial populations which can produce beneficial metabolic products and develop a methodology to stimulate those select microbes with nutrient amendments to increase oil recovery. This microbial technology has the capability of producing multiple oil-releasing agents. Experimental laboratory work in model sandpack cores was conducted using microbial cultures isolated from produced water samples. Comparative laboratory studies demonstrating in situ production of microbial products as oil recovery agents were conducted in sand packs with natural field waters using cultures and conditions representative of oil reservoirs. Increased oil recovery in multiple model sandpack systems was achieved and the technology and results were verified by successful field studies. Direct application of the research results has lead to the development of a feasible, practical, successful, and cost-effective technology which increases oil recovery. This technology is now being commercialized and applied in numerous field projects to increase oil recovery. Two field applications of the developed technology reported production increases of 21% and 24% in oil recovery.

  5. Sixth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P. (eds.)

    1980-12-18

    INTRODUCTION TO THE PROCEEDINGS OF THE SIXTH GEOTHERMAL RESERVOIR ENGINEERING WORKSHOP, STANFORD GEOTHERMAL PROGRAM Henry J. Ramey, Jr., and Paul Kruger Co-Principal Investigators Ian G. Donaldson Program Manager Stanford Geothermal Program The Sixth Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 16, 1980. As with previous Workshops the attendance was around 100 with a significant participation from countries other than the United States (18 attendees from 6 countries). In addition, there were a number of papers from foreign contributors not able to attend. Because of the success of all the earlier workshops there was only one format change, a new scheduling of Tuesday to Thursday rather than the earlier Wednesday through Friday. This change was in general considered for the better and will be retained for the Seventh Workshop. Papers were presented on two and a half of the three days, the panel session, this year on the numerical modeling intercomparison study sponsored by the Department of Energy, being held on the second afternoon. This panel discussion is described in a separate Stanford Geothermal Program Report (SGP-TR42). This year there was a shift in subject of the papers. There was a reduction in the number of papers offered on pressure transients and well testing and an introduction of several new subjects. After overviews by Bob Gray of the Department of Energy and Jack Howard of Lawrence Berkeley Laboratory, we had papers on field development, geopressured systems, production engineering, well testing, modeling, reservoir physics, reservoir chemistry, and risk analysis. A total of 51 papers were contributed and are printed in these Proceedings. It was, however, necessary to restrict the presentations and not all papers printed were presented. Although the content of the Workshop has changed over the years, the format to date has proved to be satisfactory. The objectives of the Workshop, the bringing together of

  6. Reservoir technology - geothermal reservoir engineering research at Stanford. Fifth annual report, October 1, 1984-September 30, 1985

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Miller, F.G.; Brigham, W.E.

    1985-09-01

    The objective is to carry out research on geothermal reservoir engineering techniques useful to the geothermal industry. A parallel objective is the training of geothermal engineers and scientists. The research is focused toward accelerated development of hydrothermal resources through the evaluation of fluid reserves, and the forecasting of field behavior with time. Injection technology is a research area receiving special attention. The program is divided into reservoir definition research, modeling of heat extraction from fractured reservoirs, application and testing of new and proven reservoir engineering technology, and technology transfer. (ACR)

  7. Quantification of Hungry Horse Reservoir Water Levels Needed to Maintain or Enhance Reservoir Fisheries, 1986 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    May, Bruce; Weaver, Tom (Montana Department of Fish, Wildlife and Parks, Kalispell, MT)

    1987-06-01

    The Hungry Horse Reservoir study is part of the Northwest Power Planning Council's resident fish and wildlife plan. The plan is responsible for mitigating damages to the fish and wildlife resources caused by hydroelectric development in the Columbia River Basin. The major goal of our study is to quantify seasonal water levels needed to maintain or enhance the reservoir fishery. This study began in May 1983 and is scheduled for completion in 1988. This report contains a summary of the limnological, food habits, fish abundance and fish distribution data collected primarily in 1986. A thorough statistical analysis of the data will be presented in the completion report in 1988. This study proposes to quantify seasonal water levels needed to maintain or enhance principal game fish species in Hungry Horse Reservoir. The specific study objectives are: (1) Estimate the impact of reservoir operation on major game fish species; (2) Develop relationships between reservoir drawdown and reservoir habitat use by fish and fish food organisms; (3) Quantify the amount of reservoir habitat available at different water level elevations; (4) Estimate recruitment of westslope cutthroat trout juveniles from important spawning and nursery areas; (5) Determine the abundance, growth, distribution and use of available habitat by major game species in the reservoir; (6) Determine the abundance and availability of fish food organisms in the reservoir; and (7) Quantify the seasonal use of available food items by major fish species.

  8. Modelling of Reservoir Operations using Fuzzy Logic and ANNs

    Science.gov (United States)

    Van De Giesen, N.; Coerver, B.; Rutten, M.

    2015-12-01

    Today, almost 40.000 large reservoirs, containing approximately 6.000 km3 of water and inundating an area of almost 400.000 km2, can be found on earth. Since these reservoirs have a storage capacity of almost one-sixth of the global annual river discharge they have a large impact on the timing, volume and peaks of river discharges. Global Hydrological Models (GHM) are thus significantly influenced by these anthropogenic changes in river flows. We developed a parametrically parsimonious method to extract operational rules based on historical reservoir storage and inflow time-series. Managing a reservoir is an imprecise and vague undertaking. Operators always face uncertainties about inflows, evaporation, seepage losses and various water demands to be met. They often base their decisions on experience and on available information, like reservoir storage and the previous periods inflow. We modeled this decision-making process through a combination of fuzzy logic and artificial neural networks in an Adaptive-Network-based Fuzzy Inference System (ANFIS). In a sensitivity analysis, we compared results for reservoirs in Vietnam, Central Asia and the USA. ANFIS can indeed capture reservoirs operations adequately when fed with a historical monthly time-series of inflows and storage. It was shown that using ANFIS, operational rules of existing reservoirs can be derived without much prior knowledge about the reservoirs. Their validity was tested by comparing actual and simulated releases with each other. For the eleven reservoirs modelled, the normalised outflow, , was predicted with a MSE of 0.002 to 0.044. The rules can be incorporated into GHMs. After a network for a specific reservoir has been trained, the inflow calculated by the hydrological model can be combined with the release and initial storage to calculate the storage for the next time-step using a mass balance. Subsequently, the release can be predicted one time-step ahead using the inflow and storage.

  9. Environmental flows in the context of small reservoirs in Ghana

    Science.gov (United States)

    Gao, Y.; Kirshen, P.; Vogel, R.; Walker, P.

    2009-04-01

    Modification of rivers by dams reduces the magnitude and frequency of floods, and impacts the entire flow regime. In many cases, these modifications have adversely affected the ecological and hydrological integrity of the watershed as well as impacting food security and livelihood choices of the local community. There is now an increasing consensus that modification to river flows needs to be balanced with maintenance of essential water-dependent ecological services. Many small multi-purpose reservoirs have been built in West Africa, where rainfall is highly variable, and droughts and flash floods are frequent. These small reservoirs are an important source of water for domestic use, livestock watering, small-scale irrigation and other beneficial uses in rural communities. The small reservoirs are hydrologically linked by their associated stream network. The reservoirs alter the hydrology of the streams and the groundwater resources within the region. When an individual reservoir is considered, alteration to the entire watershed is usually not significant. However, when considered as a system, together the small reservoirs store a significant quantity of water and influence downstream flows. The small reservoirs have rarely been considered as a system, thus little consideration has been given to their collective impact on the natural environment and livelihoods of the local population in the long term. Furthermore, the impact is difficult to quantify given the diffuse nature of the small reservoirs. Therefore, a comprehensive environmental flow assessment is needed to investigate the effect of the small reservoirs as a system on the watershed, and appropriate water policy should be formulated to implement the finding from the assessment. Our project is specifically aimed at addressing this topic. We will present a case study conducted in the Upper East Region of Ghana and will discuss the findings on the hydrological, ecological and socio-economic implications of

  10. Feasibility study of sedimentary enhanced geothermal systems using reservoir simulation

    Science.gov (United States)

    Cho, Jae Kyoung

    The objective of this research is to evaluate the preliminary feasibility of commercial geothermal projects, from a sedimentary reservoir with low permeability that requires productivity enhancement, using numerical reservoir simulation. The performance of a sedimentary geothermal reservoir is investigated in terms of reservoir hydraulics and thermal evolution. To build a reliable benchmark for simulation study, validation of the numerical reservoir model with respect to an analytical model is presented, and the process to achieve an acceptable match between the numerical and analytical solutions is described. The analytical model used in this study is based on the work of Gringarten (1978), which consists of a conceptual geothermal reservoir, considering an injection and production well doublet in a homogeneous porous media. A commercial thermal reservoir simulator (STARS from Computer Modeling Group, CMG) is used in this work for numerical modeling. In order to reproduce the analytical model results, the numerical simulation model is modified to include the same assumptions of the analytical model. Simulation model parameters that make the numerical results deviate from the analytical solution, such as the grid block size, time step and no-flow boundary are identified and investigated. An analytical tracer test model proposed by Shook (2000) is numerically modeled. This model allows us to predict the time when the temperature of the produced water decreases by capturing a tracer component at production well. Reservoir simulation models with different porosity and permeability distribution are tested to see the effects of reservoir inhomogeneity and anisotropy. In particular, premature thermal breakthrough due to the presence of high permeability streak in a reservoir model is simulated. In an effort to apply the knowledge we obtained from the analytical solutions, the effects of reservoir rock and water properties, as a function of pressure and temperature, are

  11. Ninth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

    1983-12-15

    (Reservoir Chemistry), Malcolm Mossman (Reservoir Chemistry), Greg Raasch (Production), Manny Nathenson (Injection), Susan Petty (Injection), Subir Sanyal (Simulation), Marty Molloy (Petrothermal), and Allen Moench (Reservoir Physics). The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Jean Cook, Joanne Hartford, Terri Ramey, Amy Osugi, and Marilyn King for their valued help with the Workshop arrangements and the Proceedings. We also owe thanks to the program students who arranged and operated the audio-visual equipment. The Ninth Workshop was supported by the Geothermal and Hydropower Technologies Division of the U . S . Department of Energy through contract DE-AT03-80SF11459. We deeply appreciate this continued support. H. J. Ramey, Jr., R. N. Horne, P. Kruger, W. E. Brigham, F. G. Miller, J. S . Gudmundsson -vii

  12. Overtopping of Rubble Mound Breakwaters with Front Reservoir

    DEFF Research Database (Denmark)

    Burcharth, Hans F.; Andersen, Thomas Lykke

    2007-01-01

    The design and performance of breakwaters with front reservoir are discussed on the basis of physical 2-D model tests with a number of cross sections, in which vertopping discharge and spatial distribution, wave forces on inner parapet walls, and stability of reservoir armour were studied...

  13. Modelling of sedimentation processes inside Roseires Reservoir (Sudan)

    NARCIS (Netherlands)

    Omer, A.Y.A.; Ali, Y.S.A.; Roelvink, J.A.; Dastgheib, A.; Paron, P.; Crosato, A.

    2015-01-01

    Roseires Reservoir, located on the Blue Nile River in Sudan, is the first trap to the sediments coming from the vast upper river catchment in Ethiopia, which suffers from high erosion and desertification problems. The reservoir has already lost more than one-third of its storage capacity due to sedi

  14. Modelling of sedimentation processes inside Roseires Reservoir (Sudan) (discussion)

    NARCIS (Netherlands)

    Omer, A.Y.A.; Ali, Y.S.A.; Roelvink, J.A.; Dastgheib, A.; Paron, P.; Crosato, A.

    2014-01-01

    Discussion paper. Roseires Reservoir, located on the Blue Nile River, in Sudan, is the first trap to the sediments coming from the upper catchment in Ethiopia, which suffers from high erosion and desertification problems. The reservoir lost already more than one third of its 5 storage capacity due t

  15. Modelling of sedimentation processes inside Roseires Reservoir (Sudan) (abstract)

    NARCIS (Netherlands)

    Ali, Y.S.A.; Omer, A.Y.A.; Crosato, A.

    2013-01-01

    Roseires Reservoir is located on the Blue Nile River, in Sudan (figure 1). It is the first trap to the sediments coming from the upper catchment in Ethiopia, which suffers from high erosion and desertification problems. The reservoir lost already more than one third of its storage capacity due to se

  16. Optimal Control of Reservoir Discharge Quality through Selective Withdrawal.

    Science.gov (United States)

    1982-02-01

    this report is to present a procedure for the solution of the dynamic-optimal reservoir regulation problem . -- TTARGET a0 • o T MELEASII JAN STATIC...output state as a function of the input state and the associated decisions; that is, y = g(x,d) The dynamic-optimal reservoir regulation problem can be

  17. Formula of definite point overburden pressure of reservoir layers

    Directory of Open Access Journals (Sweden)

    M. Karimi

    2014-06-01

    Since reservoir layers mostly have heterogeneity characterizations, and timely and repeatedly need to control the type of cutting lithology, drilling mud and reservoir pressure by geologists and drillers, the equations derived are effective in wellhead and bottom hole operations for the calculations in which the overburden pressure plays a key role.

  18. Multi Data Reservoir History Matching using the Ensemble Kalman Filter

    KAUST Repository

    Katterbauer, Klemens

    2015-05-01

    Reservoir history matching is becoming increasingly important with the growing demand for higher quality formation characterization and forecasting and the increased complexity and expenses for modern hydrocarbon exploration projects. History matching has long been dominated by adjusting reservoir parameters based solely on well data whose spatial sparse sampling has been a challenge for characterizing the flow properties in areas away from the wells. Geophysical data are widely collected nowadays for reservoir monitoring purposes, but has not yet been fully integrated into history matching and forecasting fluid flow. In this thesis, I present a pioneering approach towards incorporating different time-lapse geophysical data together for enhancing reservoir history matching and uncertainty quantification. The thesis provides several approaches to efficiently integrate multiple geophysical data, analyze the sensitivity of the history matches to observation noise, and examine the framework’s performance in several settings, such as the Norne field in Norway. The results demonstrate the significant improvements in reservoir forecasting and characterization and the synergy effects encountered between the different geophysical data. In particular, the joint use of electromagnetic and seismic data improves the accuracy of forecasting fluid properties, and the usage of electromagnetic data has led to considerably better estimates of hydrocarbon fluid components. For volatile oil and gas reservoirs the joint integration of gravimetric and InSAR data has shown to be beneficial in detecting the influx of water and thereby improving the recovery rate. Summarizing, this thesis makes an important contribution towards integrated reservoir management and multiphysics integration for reservoir history matching.

  19. Issues in geothermal reservoir engineering, modeling, and numerical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Pritchett, J.W. (S-Cubed, La Jolla, CA (United States))

    1996-01-01

    The theoretical basis of geothermal reservoir engineering owes much of its origins to the oil and gas industries, but important differences in resource character and geological setting have resulted in substantial divergences from reservoir simulation as practiced in the petroleum industry. Geothermal reservoirs are hotter, contain different fluids, and are usually found within fractured volcanic formations with little or no intergranular permeability. Fluid flow takes place through an intricate fracture network which penetrates the otherwise impermeable rock. By their very nature, oil and gas fields prior to production are usually static (little or no natural fluid circulation) whereas, by contrast, the presence of a dynamic active natural convective circulation system is an essential prerequisite to the formation of a geo-thermal reservoir-otherwise, the earth's heat cannot penetrate upward to drillable depths. Geothermal reservoirs usually lack the regular sub-horizontal stratification pattern typical of oilfields. The resource sought (heat) is mainly contained within the mass of the rock, so that the geothermal brines serve as working fluids to redistribute this heat within the reservoir and carry it upward. During exploitation, flow rates are necessarily high (the economic value per unit mass of hot brine is vastly less than that of oil), and the objective is to create an artificial circulation system using production and injection wells to mine energy from the reservoir by cooling the rock. These phenomenological differences have resulted in development of new techniques of reservoir modeling and simulation for geothermal applications.

  20. Issues in geothermal reservoir engineering, modeling, and numerical simulation

    Energy Technology Data Exchange (ETDEWEB)

    Pritchett, J.W. [S-Cubed, La Jolla, CA (United States)

    1996-12-31

    The theoretical basis of geothermal reservoir engineering owes much of its origins to the oil and gas industries, but important differences in resource character and geological setting have resulted in substantial divergences from reservoir simulation as practiced in the petroleum industry. Geothermal reservoirs are hotter, contain different fluids, and are usually found within fractured volcanic formations with little or no intergranular permeability. Fluid flow takes place through an intricate fracture network which penetrates the otherwise impermeable rock. By their very nature, oil and gas fields prior to production are usually static (little or no natural fluid circulation) whereas, by contrast, the presence of a dynamic active natural convective circulation system is an essential prerequisite to the formation of a geo-thermal reservoir-otherwise, the earth`s heat cannot penetrate upward to drillable depths. Geothermal reservoirs usually lack the regular sub-horizontal stratification pattern typical of oilfields. The resource sought (heat) is mainly contained within the mass of the rock, so that the geothermal brines serve as working fluids to redistribute this heat within the reservoir and carry it upward. During exploitation, flow rates are necessarily high (the economic value per unit mass of hot brine is vastly less than that of oil), and the objective is to create an artificial circulation system using production and injection wells to mine energy from the reservoir by cooling the rock. These phenomenological differences have resulted in development of new techniques of reservoir modeling and simulation for geothermal applications.

  1. Reservoir and production engineering aspects of slim-hole wells

    Energy Technology Data Exchange (ETDEWEB)

    Azari, Mehdi; Soliman, Mohamed; Pacheco, Eduardo [Halliburton Energy Services (United States)

    1994-12-31

    The purpose of this article is to provide insight into the reservoir and production engineering aspects of reservoirs with well bore and completion string diameters less than conventionally drilled and completed wells. In addition it will provide an answer to the question: `when should you hydraulically fracture a slim-hole well?` (author) 10 refs., 8 figs., 18 tabs.

  2. A reservoir skeleton-based multiple point geostatistics method

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Traditional stochastic reservoir modeling,including object-based and pixel-based methods,cannot solve the problem of reproducing continuous and curvilinear reservoir objects. The paper first dives into the various stochastic modeling methods and extracts their merits,then proposes the skeleton-based multiple point geostatistics(SMPS) for the fluvial reservoir. The core idea is using the skeletons of reservoir objects to restrict the selection of data patterns. The skeleton-based multiple point geostatistics consists of two steps. First,predicting the channel skeleton(namely,channel centerline) by using the method in object-based modeling. The paper proposes a new method of search window to predict the skeleton. Then forecasting the distributions of reservoir objects using multiple point geostatistics with the restriction of channel skeleton. By the restriction of channel centerline,the selection of data events will be more reasonable and the realization will be achieved more really. The checks by the conceptual model and the real reservoir show that SMPS is much better than Sisim(sequential indicator simulation) ,Snesim(Single Normal Equation Simulation) and Simpat(simulation with patterns) in building the fluvial reservoir model. This new method will contribute to both the theoretical research of stochastic modeling and the oilfield developments of constructing highly precise reservoir geological models.

  3. Impact of climate change on reservoir reliability | Mujere | African ...

    African Journals Online (AJOL)

    Impact of climate change on reservoir reliability. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... carbon dioxide (CO2) are raising global and regional temperatures, and producing changes in other climate ... The reservoir supplies most of its water to citrus plantations.

  4. DELAYED POLYMER CROSSLINKING USED FOR PROFILE CONTROL IN SANDSTONE RESERVOIRS

    Institute of Scientific and Technical Information of China (English)

    Wang Zhongmao; Dong Bo; Fu Xiaofeng; Rong Jiashu

    1997-01-01

    @@ Most of the oil reservoirs in Jilin province occur in fractured sandstone with low permeability and heavy heterogeneity. In addition, with fracture development, the artificial fractures around producing wells and water injection wells have been increased, further aggravating the heterogeneity of oil reservoirs.

  5. The egg model - A geological ensemble for reservoir simulation

    NARCIS (Netherlands)

    Jansen, J.D.; Fonseca, R.M.; Kahrobaei, S.; Siraj, M.M.; Van Essen, G.M.; Van den Hof, P.M.J.

    2014-01-01

    The ‘Egg Model’ is a synthetic reservoir model consisting of an ensemble of 101 relatively small three-dimensional realizations of a channelized oil reservoir produced under water flooding conditions with eight water injectors and four oil producers. It has been used in numerous publications to

  6. Development of Acidizing Techniques for Low-permeability Carbonate Reservoirs

    Institute of Scientific and Technical Information of China (English)

    Liu Tongbin

    1996-01-01

    @@ Geological Background In accordance with gas reservoir occurrence, reserve type and trap type, the discovered and developed carbonate reservoirs in Sichuan Basin can be classified into the following three types: the first type is the layered porous gas reservoir (including porous and fractured porous gas reservoir), mainly distributed in East Sichuan area; the second is the block vug bottom water drive gas reservoir; the third is the irregular gas reservoir with fracture system, mainly distributed in the areas of South Sichuan and Southwest Sichuan. The reservoirs of these gas pools are mainly of carbonatite. The matrix porosity and permeability of carbonatite are very low, the porosity being below 1% - 3% and the permeability, 0.1×10-3-8× 10-3 μm2. Also the throat capillary resistance force is considerable with the mid-value width of the throat (γ50)of 0.1 - 4 μm, most below 2 μm. Owing to the low permeability and porosity as well as the serious heterogeneity of the reservoir, the productivi ty of gas wells changes greatly.

  7. Sustaining reservoir use through sediment trapping in NW Ethiopia

    NARCIS (Netherlands)

    Getahun, Mulatie Mekonnen

    2016-01-01

    To increase crop production and improve food self-sufficiency, rain-fed agriculture need to be supplemented with irrigated agriculture. To this end, a large number of reservoirs had been constructed in Ethiopia. However, reservoirs are suffering from sedimentation. This study was conducted in Minizr

  8. Remotely sensed monitoring of small reservoir dynamics: a Bayesian approach

    NARCIS (Netherlands)

    Eilander, D.M.; Annor, F.O.; Iannini, L.; Van de Giesen, N.C.

    2014-01-01

    Multipurpose small reservoirs are important for livelihoods in rural semi-arid regions. To manage and plan these reservoirs and to assess their hydrological impact at a river basin scale, it is important to monitor their water storage dynamics. This paper introduces a Bayesian approach for monitorin

  9. The egg model - A geological ensemble for reservoir simulation

    NARCIS (Netherlands)

    Jansen, J.D.; Fonseca, R.M.; Kahrobaei, S.; Siraj, M.M.; Van Essen, G.M.; Van den Hof, P.M.J.

    2014-01-01

    The ‘Egg Model’ is a synthetic reservoir model consisting of an ensemble of 101 relatively small three-dimensional realizations of a channelized oil reservoir produced under water flooding conditions with eight water injectors and four oil producers. It has been used in numerous publications to demo

  10. Monitoring Earth's reservoir and lake dynamics from space

    Science.gov (United States)

    Donchyts, G.; Eilander, D.; Schellekens, J.; Winsemius, H.; Gorelick, N.; Erickson, T.; Van De Giesen, N.

    2016-12-01

    Reservoirs and lakes constitute about 90% of the Earth's fresh surface water. They play a major role in the water cycle and are critical for the ever increasing demands of the world's growing population. Water from reservoirs is used for agricultural, industrial, domestic, and other purposes. Current digital databases of lakes and reservoirs are scarce, mainly providing only descriptive and static properties of the reservoirs. The Global Reservoir and Dam (GRanD) database contains almost 7000 entries while OpenStreetMap counts more than 500 000 entries tagged as a reservoir. In the last decade several research efforts already focused on accurate estimates of surface water dynamics, mainly using satellite altimetry, However, currently they are limited only to less than 1000 (mostly large) water bodies. Our approach is based on three main components. Firstly, a novel method, allowing automated and accurate estimation of surface area from (partially) cloud-free optical multispectral or radar satellite imagery. The algorithm uses satellite imagery measured by Landsat, Sentinel and MODIS missions. Secondly, a database to store reservoir static and dynamic parameters. Thirdly, a web-based tool, built on top of Google Earth Engine infrastructure. The tool allows estimation of surface area for lakes and reservoirs at planetary-scale at high spatial and temporal resolution. A prototype version of the method, database, and tool will be presented as well as validation using in-situ measurements.

  11. Modeling Study of High Pressure and High Temperature Reservoir Fluids

    DEFF Research Database (Denmark)

    Varzandeh, Farhad

    to 250 °C and 2400 bar, in the deep petroleum reservoirs. Furthermore, many of these deep reservoirs are found offshore, including the North Sea and the Gulf of Mexico, making the development even more risky. On the other hand, development of these high pressure high temperature (HPHT) fields can...

  12. Reservoir characteristics and control factors of Carboniferous volcanic gas reservoirs in the Dixi area of Junggar Basin, China

    Directory of Open Access Journals (Sweden)

    Ji'an Shi

    2017-02-01

    Full Text Available Field outcrop observation, drilling core description, thin-section analysis, SEM analysis, and geochemistry, indicate that Dixi area of Carboniferous volcanic rock gas reservoir belongs to the volcanic rock oil reservoir of the authigenic gas reservoir. The source rocks make contact with volcanic rock reservoir directly or by fault, and having the characteristics of near source accumulation. The volcanic rock reservoir rocks mainly consist of acidic rhyolite and dacite, intermediate andesite, basic basalt and volcanic breccia: (1 Acidic rhyolite and dacite reservoirs are developed in the middle-lower part of the structure, have suffered strong denudation effect, and the secondary pores have formed in the weathering and tectonic burial stages, but primary pores are not developed within the early diagenesis stage. Average porosity is only at 8%, and the maximum porosity is at 13.5%, with oil and gas accumulation showing poor performance. (2 Intermediate andesite and basic basalt reservoirs are mainly distributed near the crater, which resembles the size of and suggests a volcanic eruption. Primary pores are formed in the early diagenetic stage, secondary pores developed in weathering and erosion transformation stage, and secondary fractures formed in the tectonic burial stage. The average porosity is at 9.2%, and the maximum porosity is at 21.9%: it is of the high-quality reservoir types in Dixi area. (3 The volcanic breccia reservoir has the same diagenetic features with sedimentary rocks, but also has the same mineral composition with volcanic rock; rigid components can keep the primary porosity without being affected by compaction during the burial process. At the same time, the brittleness of volcanic breccia reservoir makes it easily fracture under the stress; internal fracture was developmental. Volcanic breccia developed in the structural high part and suffered a long-term leaching effect. The original pore-fracture combination also made

  13. Integrating gravimetric and interferometric synthetic aperture radar data for enhancing reservoir history matching of carbonate gas and volatile oil reservoirs

    KAUST Repository

    Katterbauer, Klemens

    2016-08-25

    Reservoir history matching is assuming a critical role in understanding reservoir characteristics, tracking water fronts, and forecasting production. While production data have been incorporated for matching reservoir production levels and estimating critical reservoir parameters, the sparse spatial nature of this dataset limits the efficiency of the history matching process. Recently, gravimetry techniques have significantly advanced to the point of providing measurement accuracy in the microgal range and consequently can be used for the tracking of gas displacement caused by water influx. While gravity measurements provide information on subsurface density changes, i.e., the composition of the reservoir, these data do only yield marginal information about temporal displacements of oil and inflowing water. We propose to complement gravimetric data with interferometric synthetic aperture radar surface deformation data to exploit the strong pressure deformation relationship for enhancing fluid flow direction forecasts. We have developed an ensemble Kalman-filter-based history matching framework for gas, gas condensate, and volatile oil reservoirs, which synergizes time-lapse gravity and interferometric synthetic aperture radar data for improved reservoir management and reservoir forecasts. Based on a dual state-parameter estimation algorithm separating the estimation of static reservoir parameters from the dynamic reservoir parameters, our numerical experiments demonstrate that history matching gravity measurements allow monitoring the density changes caused by oil-gas phase transition and water influx to determine the saturation levels, whereas the interferometric synthetic aperture radar measurements help to improve the forecasts of hydrocarbon production and water displacement directions. The reservoir estimates resulting from the dual filtering scheme are on average 20%-40% better than those from the joint estimation scheme, but require about a 30% increase in

  14. Using reservoir engineering data to solve geological ambiguities : a case study of one of the Iranian carbonate reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Kord, S. [National Iranian South Oil Co. (Iran, Islamic Republic of)

    2006-07-01

    A fractured carbonate reservoir in southwest Iran was studied with reference to reserve estimation, risk analysis, material balance and recovery factor. The 40 km long and 4 km wide reservoir consists of 2 parts with crest depths of 3780 and 3749 mss respectively. The eastern part is smaller and more productive than the western part which has high water saturation and absolutely no production. Economic production from the reservoir began in 1977. By 2004, the cumulative production had reached 12.064 MMSTB. Of the 6 wells drilled, only 2 wells in the eastern part are productive. This study addressed the main uncertainty of whether the 2 parts of the reservoir are sealed or not. The reservoir is under-saturated but the current pressure is near saturation pressure. The reservoir is divided into the following 4 zones: zones 1 and 2 are productive and consist mainly of carbonate rocks; zone 3 has thin beds of sand and shale; and, zone 4 consists of layers of carbonate, shale, marn, and dolomite. Although there are no faults, mud loss suggests that the reservoir has hairline fractures. Oil in place and reserves were estimated for both parts based on calculated reservoir engineering parameters. Material balance calculations were then performed to analyze and simulate the reservoir. The communication between the 2 parts of the reservoir were examined according to core analysis, rock type, fluid characterization, pressure analysis, water-oil contacts, production history and petrophysical evaluations. The porosity was found to be the same in both parts, but the water saturation and net to gross ratios were different between the eastern and western parts. The petrophysical evaluation revealed that there is no communication between the two parts of the reservoir. 4 refs., 2 figs., 2 appendices.

  15. Three dimensional heat transport modeling in Vossoroca reservoir

    Science.gov (United States)

    Arcie Polli, Bruna; Yoshioka Bernardo, Julio Werner; Hilgert, Stephan; Bleninger, Tobias

    2017-04-01

    Freshwater reservoirs are used for many purposes as hydropower generation, water supply and irrigation. In Brazil, according to the National Energy Balance of 2013, hydropower energy corresponds to 70.1% of the Brazilian demand. Superficial waters (which include rivers, lakes and reservoirs) are the most used source for drinking water supply - 56% of the municipalities use superficial waters as a source of water. The last two years have shown that the Brazilian water and electricity supply is highly vulnerable and that improved management is urgently needed. The construction of reservoirs affects physical, chemical and biological characteristics of the water body, e.g. stratification, temperature, residence time and turbulence reduction. Some water quality issues related to reservoirs are eutrophication, greenhouse gas emission to the atmosphere and dissolved oxygen depletion in the hypolimnion. The understanding of the physical processes in the water body is fundamental to reservoir management. Lakes and reservoirs may present a seasonal behavior and stratify due to hydrological and meteorological conditions, and especially its vertical distribution may be related to water quality. Stratification can control heat and dissolved substances transport. It has been also reported the importance of horizontal temperature gradients, e.g. inflows and its density and processes of mass transfer from shallow to deeper regions of the reservoir, that also may impact water quality. Three dimensional modeling of the heat transport in lakes and reservoirs is an important tool to the understanding and management of these systems. It is possible to estimate periods of large vertical temperature gradients, inhibiting vertical transport and horizontal gradients, which could be responsible for horizontal transport of heat and substances (e.g. differential cooling or inflows). Vossoroca reservoir was constructed in 1949 by the impoundment of São João River and is located near to

  16. Bathymetry and capacity of Shawnee Reservoir, Oklahoma, 2016

    Science.gov (United States)

    Ashworth, Chad E.; Smith, S. Jerrod; Smith, Kevin A.

    2017-02-13

    Shawnee Reservoir (locally known as Shawnee Twin Lakes) is a man-made reservoir on South Deer Creek with a drainage area of 32.7 square miles in Pottawatomie County, Oklahoma. The reservoir consists of two lakes connected by an equilibrium channel. The southern lake (Shawnee City Lake Number 1) was impounded in 1935, and the northern lake (Shawnee City Lake Number 2) was impounded in 1960. Shawnee Reservoir serves as a municipal water supply, and water is transferred about 9 miles by gravity to a water treatment plant in Shawnee, Oklahoma. Secondary uses of the reservoir are for recreation, fish and wildlife habitat, and flood control. Shawnee Reservoir has a normal-pool elevation of 1,069.0 feet (ft) above North American Vertical Datum of 1988 (NAVD 88). The auxiliary spillway, which defines the flood-pool elevation, is at an elevation of 1,075.0 ft.The U.S. Geological Survey (USGS), in cooperation with the City of Shawnee, has operated a real-time stage (water-surface elevation) gage (USGS station 07241600) at Shawnee Reservoir since 2006. For the period of record ending in 2016, this gage recorded a maximum stage of 1,078.1 ft on May 24, 2015, and a minimum stage of 1,059.1 ft on April 10–11, 2007. This gage did not report reservoir storage prior to this report (2016) because a sufficiently detailed and thoroughly documented bathymetric (reservoir-bottom elevation) survey and corresponding stage-storage relation had not been published. A 2011 bathymetric survey with contours delineated at 5-foot intervals was published in Oklahoma Water Resources Board (2016), but that publication did not include a stage-storage relation table. The USGS, in cooperation with the City of Shawnee, performed a bathymetric survey of Shawnee Reservoir in 2016 and released the bathymetric-survey data in 2017. The purposes of the bathymetric survey were to (1) develop a detailed bathymetric map of the reservoir and (2) determine the relations between stage and reservoir storage

  17. Stabilization of bottom sediments from Rzeszowski Reservoir

    Directory of Open Access Journals (Sweden)

    Koś Karolina

    2015-06-01

    Full Text Available The paper presents results of stabilization of bottom sediments from Rzeszowski Reservoir. Based on the geotechnical characteristics of the tested sediments it was stated they do not fulfill all the criteria set for soils in earth embankments. Therefore, an attempt to improve their parameters was made by using two additives – cement and lime. An unconfined compressive strength, shear strength, bearing ratio and pH reaction were determined on samples after different time of curing. Based on the carried out tests it was stated that the obtained values of unconfined compressive strength of sediments stabilized with cement were relatively low and they did not fulfill the requirements set by the Polish standard, which concerns materials in road engineering. In case of lime stabilization it was stated that the tested sediments with 6% addition of the additive can be used for the bottom layers of the improved road base.

  18. Foodborne Campylobacter: Infections, Metabolism, Pathogenesis and Reservoirs

    Directory of Open Access Journals (Sweden)

    Sharon V. R. Epps

    2013-11-01

    Full Text Available Campylobacter species are a leading cause of bacterial-derived foodborne illnesses worldwide. The emergence of this bacterial group as a significant causative agent of human disease and their propensity to carry antibiotic resistance elements that allows them to resist antibacterial therapy make them a serious public health threat. Campylobacter jejuni and Campylobacter coli are considered to be the most important enteropathogens of this genus and their ability to colonize and survive in a wide variety of animal species and habitats make them extremely difficult to control. This article reviews the historical and emerging importance of this bacterial group and addresses aspects of the human infections they cause, their metabolism and pathogenesis, and their natural reservoirs in order to address the need for appropriate food safety regulations and interventions.

  19. Calibration of Seismic Attributes for Reservoir Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington

    2002-09-29

    The project, "Calibration of Seismic Attributes for Reservoir Characterization," is now complete. Our original proposed scope of work included detailed analysis of seismic and other data from two to three hydrocarbon fields; we have analyzed data from four fields at this level of detail, two additional fields with less detail, and one other 2D seismic line used for experimentation. We also included time-lapse seismic data with ocean-bottom cable recordings in addition to the originally proposed static field data. A large number of publications and presentations have resulted from this work, inlcuding several that are in final stages of preparation or printing; one of these is a chapter on "Reservoir Geophysics" for the new Petroleum Engineering Handbook from the Society of Petroleum Engineers. Major results from this project include a new approach to evaluating seismic attributes in time-lapse monitoring studies, evaluation of pitfalls in the use of point-based measurements and facies classifications, novel applications of inversion results, improved methods of tying seismic data to the wellbore, and a comparison of methods used to detect pressure compartments. Some of the data sets used are in the public domain, allowing other investigators to test our techniques or to improve upon them using the same data. From the public-domain Stratton data set we have demonstrated that an apparent correlation between attributes derived along 'phantom' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the public-domain Boonsville data set we developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into productive and non-productive subfacies, and we

  20. CALIBRATION OF SEISMIC ATTRIBUTES FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington; Horacio Acevedo; Aaron Green; Joshua Haataja; Shawn Len; Anastasia Minaeva; Deyi Xie

    2002-10-01

    The project, ''Calibration of Seismic Attributes for Reservoir Calibration,'' is now complete. Our original proposed scope of work included detailed analysis of seismic and other data from two to three hydrocarbon fields; we have analyzed data from four fields at this level of detail, two additional fields with less detail, and one other 2D seismic line used for experimentation. We also included time-lapse seismic data with ocean-bottom cable recordings in addition to the originally proposed static field data. A large number of publications and presentations have resulted from this work, including several that are in final stages of preparation or printing; one of these is a chapter on ''Reservoir Geophysics'' for the new Petroleum Engineering Handbook from the Society of Petroleum Engineers. Major results from this project include a new approach to evaluating seismic attributes in time-lapse monitoring studies, evaluation of pitfalls in the use of point-based measurements and facies classifications, novel applications of inversion results, improved methods of tying seismic data to the wellbore, and a comparison of methods used to detect pressure compartments. Some of the data sets used are in the public domain, allowing other investigators to test our techniques or to improve upon them using the same data. From the public-domain Stratton data set we have demonstrated that an apparent correlation between attributes derived along ''phantom'' horizons are artifacts of isopach changes; only if the interpreter understands that the interpretation is based on this correlation with bed thickening or thinning, can reliable interpretations of channel horizons and facies be made. From the public-domain Boonsville data set we developed techniques to use conventional seismic attributes, including seismic facies generated under various neural network procedures, to subdivide regional facies determined from logs into

  1. Foodborne Campylobacter: Infections, Metabolism, Pathogenesis and Reservoirs

    Science.gov (United States)

    Epps, Sharon V. R.; Harvey, Roger B.; Hume, Michael E.; Phillips, Timothy D.; Anderson, Robin C.; Nisbet, David J.

    2013-01-01

    Campylobacter species are a leading cause of bacterial-derived foodborne illnesses worldwide. The emergence of this bacterial group as a significant causative agent of human disease and their propensity to carry antibiotic resistance elements that allows them to resist antibacterial therapy make them a serious public health threat. Campylobacter jejuni and Campylobacter coli are considered to be the most important enteropathogens of this genus and their ability to colonize and survive in a wide variety of animal species and habitats make them extremely difficult to control. This article reviews the historical and emerging importance of this bacterial group and addresses aspects of the human infections they cause, their metabolism and pathogenesis, and their natural reservoirs in order to address the need for appropriate food safety regulations and interventions. PMID:24287853

  2. Naturally fractured tight gas reservoir detection optimization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-06-01

    Building upon the partitioning of the Greater Green River Basin (GGRB) that was conducted last quarter, the goal of the work this quarter has been to conclude evaluation of the Stratos well and the prototypical Green River Deep partition, and perform the fill resource evaluation of the Upper Cretaceous tight gas play, with the goal of defining target areas of enhanced natural fracturing. The work plan for the quarter of November 1-December 31, 1998 comprised four tasks: (1) Evaluation of the Green River Deep partition and the Stratos well and examination of potential opportunity for expanding the use of E and P technology to low permeability, naturally fractured gas reservoirs, (2) Gas field studies, and (3) Resource analysis of the balance of the partitions.

  3. An electrochemical approach to oil reservoir souring

    Energy Technology Data Exchange (ETDEWEB)

    Marsland, S.D.; Dawe, R.A.; Kelsall, G.H. (Imperial Coll., London (GB). Dept. of Mineral Resources Engineering)

    1990-07-01

    The objective of this work was to establish the feasibility of using an Ag{sub 2}S/Ag ring electrode of a rotating ring-disc electrode system as a linear amperometric sensor for the local H{sub 2}S concentration generated by the combined chemical and electrochemical decomposition of a pyrrhotite (FeS{sub 1+x}) disc electrode. This enabled a more detailed investigation of the non-oxidative dissolution of 'FeS'. The results indicate that, provided iron sulphides are present in an oil reservoir, the decomposition of iron sulphides due to operator-imposed changes in the aqueous environment is a probable source of H{sub 2}S. (author).

  4. Rock-property changes during reservoir compaction

    Energy Technology Data Exchange (ETDEWEB)

    Morita, N. (Conoco, Inc., Ponca City, OK (United States)); Gray, K.E. (Texas Univ., Austin, TX (United States)); Srouji, F.A.A.; Jogi, P.N. (Teleco Oilfield Services Inc., Meviden, CT (US))

    1992-09-01

    Deformations, absolute permeability, electrical resistivity, PV change, and compressional- and shear-wave velocities were measured for Berea sandstone under various loading paths at temperatures from 70 to 380{degrees} F. The experimental behavior was subdivided into five categories. The experimental results were analyzed for each category, and the analysis was used to construct semianalytical rock-property equations, are expressed in terms of strain components. This formalism is practical because strains are more directly related to rock properties that are stress components. This paper presents unique rock-property data, including axial and radial measurements with various loading paths and temperatures; semianalytical equations that accurately simulate rock properties under various loading paths up to rock failure; and realistic predictions of rock-property changes during reservoir compaction.

  5. Wellbore pressure response in naturally fractured reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, A.C. Jr.; Chang, W.; Raghavan, R.

    1983-01-01

    Recently a new flow regime has been identified for pressure drawdown or buildup data obtained from a well producing a naturally fractured reservoir. During the time period corresponding to this new flow regime, a semilog plot of pressure vs. time exhibits a semilog straight line with slope equal to m/2, where m is the slope of both the early and late time semilog straight lines predicted by the Warren and Root model. The identification of this intermediate time semilog straight line means that pressure data may exhibit as many as 3 semilog straight lines. A virtually complete analysis of well test pressure data is possible when the data exhibits 2 or more of the 3 possible straight lines. This work presents type curves which can be used to obtain a virtually complete analysis of pressure data when only one of the 3 semilog straight lines is reflected by the data. 13 references.

  6. NUMERICAL SIMULATION OF SEDIMENT RELEASE FROM RESERVOIRS

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    For the computation of the sediment quantity released from reservoirs, a vertical two-dimensional hydrodynamic model is combined with a sediment transport model. The hydrodynamic model is based on the equations of mass and momentum conservation along with a k - ε model for closure of the Reynolds stresses. The sediment transport model is based on the convection-diffusion equation of sediment concentration and the sediment continuity equation. Both the hydrodynamic and sediment transport models are developed in a boundary-fitted curvilinear co-ordinate system. Comparison of the predicted mean velocity field with laboratory results indicates that the present model captures most experimental trends with reasonable accuracy. Also good agreement is found in comparison of the sediment transport results for the numerical model and the experimental model.

  7. Atomic Rydberg Reservoirs for Polar Molecules

    CERN Document Server

    Zhao, Bo; Pupillo, Guido; Zoller, Peter

    2011-01-01

    We discuss laser dressed dipolar and Van der Waals interactions between atoms and polar molecules, so that a cold atomic gas with laser admixed Rydberg levels acts as a designed reservoir for both elastic and inelastic collisional processes. The elastic scattering channel is characterized by large elastic scattering cross sections and repulsive shields to protect from close encounter collisions. In addition, we discuss a dissipative (inelastic) collision where a spontaneously emitted photon carries away (kinetic) energy of the collision partners, thus providing a significant energy loss in a single collision. This leads to the scenario of rapid thermalization and cooling of a molecule in the mK down to the \\mu K regime by cold atoms.

  8. Atomic Rydberg Reservoirs for Polar Molecules

    Science.gov (United States)

    Zhao, B.; Glaetzle, A. W.; Pupillo, G.; Zoller, P.

    2012-05-01

    We discuss laser-dressed dipolar and van der Waals interactions between atoms and polar molecules, so that a cold atomic gas with laser admixed Rydberg levels acts as a designed reservoir for both elastic and inelastic collisional processes. The elastic scattering channel is characterized by large elastic scattering cross sections and repulsive shields to protect from close encounter collisions. In addition, we discuss a dissipative (inelastic) collision where a spontaneously emitted photon carries away (kinetic) energy of the collision partners, thus providing a significant energy loss in a single collision. This leads to the scenario of rapid thermalization and cooling of a molecule in the mK down to the μK regime by cold atoms.

  9. Gypsy Field project in reservoir characterization

    Energy Technology Data Exchange (ETDEWEB)

    Castagna, John P.; Jr., O' Meara, Daniel J.

    2000-01-12

    The overall objective of this project was to use extensive Gypsy Field Laboratory and data as a focus for developing and testing reservoir characterization methods that are targeted at improved recovery of conventional oil. This report describes progress since project report DOE/BC/14970-7 and covers the period June 1997-September 1998 and represents one year of funding originally allocated for the year 1996. During the course of the work previously performed, high resolution geophysical and outcrop data revealed the importance of fractures at the Gypsy site. In addition, personnel changes and alternative funding (OCAST and oil company support of various kinds) allowed the authors to leverage DOE contributions and focus more on geophysical characterization.

  10. Chickamauga Reservoir 1992 fisheries monitoring cove rotenone results

    Energy Technology Data Exchange (ETDEWEB)

    Kerley, B.L.

    1993-06-01

    The Tennessee Valley Authority (TVA) is required by the National Pollutant Discharge Elimination System (NPDES) Permit for Sequoyah Nuclear Plant (SQN) to conduct and report annually a nonradiological operational monitoring program to evaluate potential effects of SQN on Chickamauga Reservoir. This monitoring program was initially designed to identify potential changes in water quality and biological communities in Chickamauga Reservoir resulting from operation of SQU. Chickamauga Reservoir cove rotenone sampling has also been conducted as part of the preoperational monitoring program for Watts Bar Nuclear Plant (WBN) to evaluate the combined effects of operating two nuclear facilities on one reservoir once WBU becomes operational. The purpose of this report is to present results of cove rotenone sampling conducted on Chickamauga Reservoir in 1992.

  11. Classification and uptake of reservoir operation optimization methods

    Science.gov (United States)

    Dobson, Barnaby; Pianosi, Francesca; Wagener, Thorsten

    2016-04-01

    Reservoir operation optimization algorithms aim to improve the quality of reservoir release and transfer decisions. They achieve this by creating and optimizing the reservoir operating policy; a function that returns decisions based on the current system state. A range of mathematical optimization algorithms and techniques has been applied to the reservoir operation problem of policy optimization. In this work, we propose a classification of reservoir optimization approaches by focusing on the formulation of the water management problem rather than the optimization algorithm type. We believe that decision makers and operators will find it easier to navigate a classification system based on the problem characteristics, something they can clearly define, rather than the optimization algorithm. Part of this study includes an investigation regarding the extent of algorithm uptake and the possible reasons that limit real world application.

  12. Equilibrium composition between liquid and clathrate reservoirs on Titan

    CERN Document Server

    Mousis, Olivier; Lunine, Jonathan I; Sotin, Christophe

    2015-01-01

    Hundreds of lakes and a few seas of liquid hydrocarbons have been observed by the Cassini spacecraft to cover the polar regions of Titan. A significant fraction of these lakes or seas could possibly be interconnected with subsurface liquid reservoirs of alkanes. In this paper, we investigate the interplay that would happen between a reservoir of liquid hydrocarbons located in Titan's subsurface and a hypothetical clathrate reservoir that progressively forms if the liquid mixture diffuses throughout a preexisting porous icy layer. To do so, we use a statistical-thermodynamic model in order to compute the composition of the clathrate reservoir that forms as a result of the progressive entrapping of the liquid mixture. This study shows that clathrate formation strongly fractionates the molecules between the liquid and the solid phases. Depending on whether the structure I or structure II clathrate forms, the present model predicts that the liquid reservoirs would be mainly composed of either propane or ethane, r...

  13. HIV reservoirs: what, where and how to target them.

    Science.gov (United States)

    Churchill, Melissa J; Deeks, Steven G; Margolis, David M; Siliciano, Robert F; Swanstrom, Ronald

    2016-01-01

    One of the main challenges in the fight against HIV infection is to develop strategies that are able to eliminate the persistent viral reservoir that harbours integrated, replication-competent provirus within host cellular DNA. This reservoir is resistant to antiretroviral therapy (ART) and to clearance by the immune system of the host; viruses originating from this reservoir lead to rebound viraemia once treatment is stopped, giving rise to new rounds of infection. Several studies have focused on elucidating the cells and tissues that harbour persistent virus, the true size of the reservoir and how best to target it, but these topics are the subject of ongoing debate. In this Viewpoint article, several experts in the field discuss the constitution of the viral reservoir, how best to measure it and the best ways to target this source of persistent infection.

  14. A reservoir morphology database for the conterminous United States

    Science.gov (United States)

    Rodgers, Kirk D.

    2017-09-13

    The U.S. Geological Survey, in cooperation with the Reservoir Fisheries Habitat Partnership, combined multiple national databases to create one comprehensive national reservoir database and to calculate new morphological metrics for 3,828 reservoirs. These new metrics include, but are not limited to, shoreline development index, index of basin permanence, development of volume, and other descriptive metrics based on established morphometric formulas. The new database also contains modeled chemical and physical metrics. Because of the nature of the existing databases used to compile the Reservoir Morphology Database and the inherent missing data, some metrics were not populated. One comprehensive database will assist water-resource managers in their understanding of local reservoir morphology and water chemistry characteristics throughout the continental United States.

  15. Heat Extraction Project, geothermal reservoir engineering research at Stanford

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, P.

    1989-01-01

    The main objective of the SGP Heat Extraction Project is to provide a means for estimating the thermal behavior of geothermal fluids produced from fractured hydrothermal resources. The methods are based on estimated thermal properties of the reservoir components, reservoir management planning of production and reinjection, and the mixing of reservoir fluids: geothermal, resource fluid cooled by drawdown and infiltrating groundwater, and reinjected recharge heated by sweep flow through the reservoir formation. Several reports and publications, listed in Appendix A, describe the development of the analytical methods which were part of five Engineer and PhD dissertations, and the results from many applications of the methods to achieve the project objectives. The Heat Extraction Project is to evaluate the thermal properties of fractured geothermal resource and forecasted effects of reinjection recharge into operating reservoirs.

  16. Quantitatively evaluating the CBM reservoir using logging data

    Science.gov (United States)

    Liu, Zhidi; Zhao, Jingzhou

    2016-02-01

    In order to evaluate coal bed methane (CBM) reservoirs, this paper select five parameters: porosity, permeability, CBM content, the coal structure index and effective thickness of the coal seam. Making full use of logging and the laboratory analysis data of a coal core, the logging evaluation methods of the five parameters were discussed in detail, and the comprehensive evaluation model of the CBM reservoir was established. The #5 coal seam of the Hancheng mine on the eastern edge of the Ordos Basin in China was quantitatively evaluated using this method. The results show that the CBM reservoir in the study area is better than in the central and northern regions. The actual development of CBM shows that the region with a good reservoir has high gas production—indicating that the method introduced in this paper can evaluate the CBM reservoir more effectively.

  17. High resolution reservoir geological modelling using outcrop information

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Changmin; Lin Kexiang; Liu Huaibo [Jianghan Petroleum Institute, Hubei (China)] [and others

    1997-08-01

    This is China`s first case study of high resolution reservoir geological modelling using outcrop information. The key of the modelling process is to build a prototype model and using the model as a geological knowledge bank. Outcrop information used in geological modelling including seven aspects: (1) Determining the reservoir framework pattern by sedimentary depositional system and facies analysis; (2) Horizontal correlation based on the lower and higher stand duration of the paleo-lake level; (3) Determining the model`s direction based on the paleocurrent statistics; (4) Estimating the sandbody communication by photomosaic and profiles; (6) Estimating reservoir properties distribution within sandbody by lithofacies analysis; and (7) Building the reservoir model in sandbody scale by architectural element analysis and 3-D sampling. A high resolution reservoir geological model of Youshashan oil field has been built by using this method.

  18. Bathymetry of Clear Creek Reservoir, Chaffee County, Colorado, 2016

    Science.gov (United States)

    Kohn, Michael S.; Kinzel, Paul J.; Mohrmann, Jacob S.

    2017-03-06

    To better characterize the water supply capacity of Clear Creek Reservoir, Chaffee County, Colorado, the U.S. Geological Survey, in cooperation with the Pueblo Board of Water Works and Colorado Mountain College, carried out a bathymetry survey of Clear Creek Reservoir. A bathymetry map of the reservoir is presented here with the elevation-surface area and the elevation-volume relations. The bathymetry survey was carried out June 6–9, 2016, using a man-operated boat-mounted, multibeam echo sounder integrated with a Global Positioning System and a terrestrial survey using real-time kinematic Global Navigation Satellite Systems. The two collected datasets were merged and imported into geographic information system software. The equipment and methods used in this study allowed water-resource managers to maintain typical reservoir operations, eliminating the need to empty the reservoir to carry out the survey.

  19. Hedging rule for reservoir operations: 1. A theoretical analysis

    Science.gov (United States)

    You, Jiing-Yun; Cai, Ximing

    2008-01-01

    Hedging rule policies for reservoir operations accept small deficits in current supply to reduce the probability of a severe water shortage later. This paper expands a theoretical analysis and develops a conceptual two-period model for reservoir operation with hedging that includes uncertain future reservoir inflow explicitly. Extended analysis of the model properties and influencing factors is presented with a general utility function, addressing (1) the starting and ending water availability for hedging, (2) the range of hedging that is related to water demand levels, (3) inflow uncertainty, and (4) evaporation loss. Some intuitive knowledge on reservoir operation is proved or reconfirmed analytically; and new knowledge is derived. This theoretical analysis provides an updated basis for further theoretical study, and the theoretical findings can be used to improve numerical modeling for reservoir operation.

  20. Robust Reservoir Generation by Correlation-Based Learning

    Directory of Open Access Journals (Sweden)

    Tadashi Yamazaki

    2009-01-01

    Full Text Available Reservoir computing (RC is a new framework for neural computation. A reservoir is usually a recurrent neural network with fixed random connections. In this article, we propose an RC model in which the connections in the reservoir are modifiable. Specifically, we consider correlation-based learning (CBL, which modifies the connection weight between a given pair of neurons according to the correlation in their activities. We demonstrate that CBL enables the reservoir to reproduce almost the same spatiotemporal activity patterns in response to an identical input stimulus in the presence of noise. This result suggests that CBL enhances the robustness in the generation of the spatiotemporal activity pattern against noise in input signals. We apply our RC model to trace eyeblink conditioning. The reservoir bridged the gap of an interstimulus interval between the conditioned and unconditioned stimuli, and a readout neuron was able to learn and express the timed conditioned response.

  1. Suitable Conditions of Reservoir Simulation for Searching Rule Curves

    Science.gov (United States)

    Kangrang, Anongrit; Chaleeraktrakoon, Chavalit

    The objective of this study is to carry out a suitable length of inflow record using in the simulation model. The second objective is to find an effect of initial reservoir capacity of reservoir simulation for searching the optimal rule curves. The reservoir simulation model was connected with genetic algorithms to search the optimal rule curves quickly. The model has been applied to determine the optimal rule curves of the Bhumibol and Sirikit Reservoirs (the Chao Phraya River Basin, Thailand). The optimal rule curves of each condition were used to assess by a Monte Carlo simulation. The results show that the shortest period of dry inflow record using in the simulation model in order to search the optimal rule curves is 10 year. Furthermore, the minimum initial capacity of reservoir for searching optimal rule curves is 10% of full capacity.

  2. All-optical reservoir computer based on saturation of absorption.

    Science.gov (United States)

    Dejonckheere, Antoine; Duport, François; Smerieri, Anteo; Fang, Li; Oudar, Jean-Louis; Haelterman, Marc; Massar, Serge

    2014-05-05

    Reservoir computing is a new bio-inspired computation paradigm. It exploits a dynamical system driven by a time-dependent input to carry out computation. For efficient information processing, only a few parameters of the reservoir needs to be tuned, which makes it a promising framework for hardware implementation. Recently, electronic, opto-electronic and all-optical experimental reservoir computers were reported. In those implementations, the nonlinear response of the reservoir is provided by active devices such as optoelectronic modulators or optical amplifiers. By contrast, we propose here the first reservoir computer based on a fully passive nonlinearity, namely the saturable absorption of a semiconductor mirror. Our experimental setup constitutes an important step towards the development of ultrafast low-consumption analog computers.

  3. Computational Intelligence for Deepwater Reservoir Depositional Environments Interpretation

    CERN Document Server

    Yu, Tina; Clark, Julian; Sullivan, Morgan; 10.1016/j.jngse.2011.07.014

    2013-01-01

    Predicting oil recovery efficiency of a deepwater reservoir is a challenging task. One approach to characterize a deepwater reservoir and to predict its producibility is by analyzing its depositional information. This research proposes a deposition-based stratigraphic interpretation framework for deepwater reservoir characterization. In this framework, one critical task is the identification and labeling of the stratigraphic components in the reservoir, according to their depositional environments. This interpretation process is labor intensive and can produce different results depending on the stratigrapher who performs the analysis. To relieve stratigrapher's workload and to produce more consistent results, we have developed a novel methodology to automate this process using various computational intelligence techniques. Using a well log data set, we demonstrate that the developed methodology and the designed workflow can produce finite state transducer models that interpret deepwater reservoir depositional...

  4. Opportunities to improve oil productivity in unstructured deltaic reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This report contains presentations presented at a technical symposium on oil production. Chapter 1 contains summaries of the presentations given at the Department of Energy (DOE)-sponsored symposium and key points of the discussions that followed. Chapter 2 characterizes the light oil resource from fluvial-dominated deltaic reservoirs in the Tertiary Oil Recovery Information System (TORIS). An analysis of enhanced oil recovery (EOR) and advanced secondary recovery (ASR) potential for fluvial-dominated deltaic reservoirs based on recovery performance and economic modeling as well as the potential resource loss due to well abandonments is presented. Chapter 3 provides a summary of the general reservoir characteristics and properties within deltaic deposits. It is not exhaustive treatise, rather it is intended to provide some basic information about geologic, reservoir, and production characteristics of deltaic reservoirs, and the resulting recovery problems.

  5. Reviving Abandoned Reservoirs with High-Pressure Air Injection: Application in a Fractured and Karsted Dolomite Reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Robert Loucks; Stephen C. Ruppel; Dembla Dhiraj; Julia Gale; Jon Holder; Jeff Kane; Jon Olson; John A. Jackson; Katherine G. Jackson

    2006-09-30

    Despite declining production rates, existing reservoirs in the United States contain vast volumes of remaining oil that is not being effectively recovered. This oil resource constitutes a huge target for the development and application of modern, cost-effective technologies for producing oil. Chief among the barriers to the recovery of this oil are the high costs of designing and implementing conventional advanced recovery technologies in these mature, in many cases pressure-depleted, reservoirs. An additional, increasingly significant barrier is the lack of vital technical expertise necessary for the application of these technologies. This lack of expertise is especially notable among the small operators and independents that operate many of these mature, yet oil-rich, reservoirs. We addressed these barriers to more effective oil recovery by developing, testing, applying, and documenting an innovative technology that can be used by even the smallest operator to significantly increase the flow of oil from mature U.S. reservoirs. The Bureau of Economic Geology and Goldrus Producing Company assembled a multidisciplinary team of geoscientists and engineers to evaluate the applicability of high-pressure air injection (HPAI) in revitalizing a nearly abandoned carbonate reservoir in the Permian Basin of West Texas. The Permian Basin, the largest oil-bearing basin in North America, contains more than 70 billion barrels of remaining oil in place and is an ideal venue to validate this technology. We have demonstrated the potential of HPAI for oil-recovery improvement in preliminary laboratory tests and a reservoir pilot project. To more completely test the technology, this project emphasized detailed characterization of reservoir properties, which were integrated to access the effectiveness and economics of HPAI. The characterization phase of the project utilized geoscientists and petroleum engineers from the Bureau of Economic Geology and the Department of Petroleum

  6. Algae as reservoirs for coral pathogens.

    Directory of Open Access Journals (Sweden)

    Michael J Sweet

    Full Text Available Benthic algae are associated with coral death in the form of stress and disease. It's been proposed that they release exudates, which facilitate invasion of potentially pathogenic microbes at the coral-algal interface, resulting in coral disease. However, the original source of these pathogens remains unknown. This study examined the ability of benthic algae to act as reservoirs of coral pathogens by characterizing surface associated microbes associated with major Caribbean and Indo-Pacific algal species/types and by comparing them to potential pathogens of two dominant coral diseases: White Syndrome (WS in the Indo-Pacific and Yellow Band Disease (YBD in the Caribbean. Coral and algal sampling was conducted simultaneously at the same sites to avoid spatial effects. Potential pathogens were defined as those absent or rare in healthy corals, increasing in abundance in healthy tissues adjacent to a disease lesion, and dominant in disease lesions. Potentially pathogenic bacteria were detected in both WS and YBD and were also present within the majority of algal species/types (54 and 100% for WS and YBD respectively. Pathogenic ciliates were associated only with WS and not YBD lesions and these were also present in 36% of the Indo-Pacific algal species. Although potential pathogens were associated with many algal species, their presence was inconsistent among replicate algal samples and detection rates were relatively low, suggestive of low density and occurrence. At the community level, coral-associated microbes irrespective of the health of their host differed from algal-associated microbes, supporting that algae and corals have distinctive microbial communities associated with their tissue. We conclude that benthic algae are common reservoirs for a variety of different potential coral pathogens. However, algal-associated microbes alone are unlikely to cause coral death. Initial damage or stress to the coral via other competitive mechanisms is

  7. Exploitation of subsea gas hydrate reservoirs

    Science.gov (United States)

    Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge

    2016-04-01

    Natural gas hydrates are considered to be a potential energy resource in the future. They occur in permafrost areas as well as in subsea sediments and are stable at high pressure and low temperature conditions. According to estimations the amount of carbon bonded in natural gas hydrates worldwide is two times larger than in all known conventional fossil fuels. Besides technical challenges that have to be overcome climate and safety issues have to be considered before a commercial exploitation of such unconventional reservoirs. The potential of producing natural gas from subsea gas hydrate deposits by various means (e.g. depressurization and/or injection of carbon dioxide) is numerically studied in the frame of the German research project »SUGAR«. The basic mechanisms of gas hydrate formation/dissociation and heat and mass transport in porous media are considered and implemented into a numerical model. The physics of the process leads to strong non-linear couplings between hydraulic fluid flow, hydrate dissociation and formation, hydraulic properties of the sediment, partial pressures and seawater solution of components and the thermal budget of the system described by the heat equation. This paper is intended to provide an overview of the recent development regarding the production of natural gas from subsea gas hydrate reservoirs. It aims at giving a broad insight into natural gas hydrates and covering relevant aspects of the exploitation process. It is focused on the thermodynamic principles and technological approaches for the exploitation. The effects occurring during natural gas production within hydrate filled sediment layers are identified and discussed by means of numerical simulation results. The behaviour of relevant process parameters such as pressure, temperature and phase saturations is described and compared for different strategies. The simulations are complemented by calculations for different safety relevant problems.

  8. Eighteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1993-01-28

    PREFACE The Eighteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 26-28, 1993. There were one hundred and seventeen registered participants which was greater than the attendance last year. Participants were from eight foreign countries: Italy, Japan, United Kingdom, Mexico, New Zealand, the Philippines, Guatemala, and Iceland. Performance of many geothermal fields outside the United States was described in several of the papers. Dean Gary Ernst opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a brief overview of the Department of Energy's current plan. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Mock who also spoke at the banquet. Thirty-nine papers were presented at the Workshop with two papers submitted for publication only. Technical papers were organized in twelve sessions concerning: field operations, The Geysers, geoscience, hot-dry-rock, injection, modeling, slim hole wells, geochemistry, well test and wellbore. Session chairmen were major contributors to the program and we thank: John Counsil, Kathleen Enedy, Harry Olson, Eduardo Iglesias, Marcelo Lippmann, Paul Atkinson, Jim Lovekin, Marshall Reed, Antonio Correa, and David Faulder. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to John Hornbrook who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

  9. BIOAVAILABILITY OF MERCURY IN SEDIMENTS FROM A FLOOD CONTROL RESERVOIR TO HYALELLA AZTECA

    Science.gov (United States)

    In the last three years, mercury contamination in North Mississippi flood control reservoirs has become a growing concern. Previous data indicate that three flood control reservoirs have similar total mercury sediment concentrations and that fish collected from one reservoir cont...

  10. Methods and systems using encapsulated tracers and chemicals for reservoir interrogation and manipulation

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Jeffery; Aines, Roger D; Duoss, Eric B; Spadaccini, Christopher M

    2014-11-04

    An apparatus, method, and system of reservoir interrogation. A tracer is encapsulating in a receptacle. The receptacle containing the tracer is injected into the reservoir. The tracer is analyzed for reservoir interrogation.

  11. BIOAVAILABILITY OF MERCURY IN SEDIMENTS FROM A FLOOD CONTROL RESERVOIR TO HYALELLA AZTECA

    Science.gov (United States)

    In the last three years, mercury contamination in North Mississippi flood control reservoirs has become a growing concern. Previous data indicate that three flood control reservoirs have similar total mercury sediment concentrations and that fish collected from one reservoir cont...

  12. Bathymetry and capacity of Blackfoot Reservoir, Caribou County, Idaho, 2011

    Science.gov (United States)

    Wood, Molly S.; Skinner, Kenneth D.; Fosness, Ryan L.

    2012-01-01

    The U.S. Geological Survey (USGS), in cooperation with the Shoshone-Bannock Tribes, surveyed the bathymetry and selected above-water sections of Blackfoot Reservoir, Caribou County, Idaho, in 2011. Reservoir operators manage releases from Government Dam on Blackfoot Reservoir based on a stage-capacity relation developed about the time of dam construction in the early 1900s. Reservoir operation directly affects the amount of water that is available for irrigation of agricultural land on the Fort Hall Indian Reservation and surrounding areas. The USGS surveyed the below-water sections of the reservoir using a multibeam echosounder and real-time kinematic global positioning system (RTK-GPS) equipment at full reservoir pool in June 2011, covering elevations from 6,090 to 6,119 feet (ft) above the North American Vertical Datum of 1988 (NAVD 88). The USGS used data from a light detection and ranging (LiDAR) survey performed in 2000 to map reservoir bathymetry from 6,116 to 6,124 ft NAVD 88, which were mostly in depths too shallow to measure with the multibeam echosounder, and most of the above-water section of the reservoir (above 6,124 ft NAVD 88). Selected points and bank erosional features were surveyed by the USGS using RTK-GPS and a total station at low reservoir pool in September 2011 to supplement and verify the LiDAR data. The stage-capacity relation was revised and presented in a tabular format. The datasets show a 2.0-percent decrease in capacity from the original survey, due to sedimentation or differences in accuracy between surveys. A 1.3-percent error also was detected in the previously used capacity table and measured water-level elevation because of questionable reference elevation at monitoring stations near Government Dam. Reservoir capacity in 2011 at design maximum pool of 6,124 ft above NAVD 88 was 333,500 acre-ft.

  13. Classification of Complex Reservoirs in Superimposed Basins of Western China

    Institute of Scientific and Technical Information of China (English)

    PANG Xiongqi; ZHOU Xinyuan; LIN Changsong; HUO Zhipeng; LUO Xiaorong; PANG Hong

    2010-01-01

    Many of the sedimentary basins in western China were formed through the superposition and compounding of at least two previously developed sedimentary basins and in general they can be termed as complex superimposed basins.The distinct differences between these basins and monotype basins are their discontinuous stratigraphic sedimentation,stratigraphic structure and stratigraphic stress-strain action over geological history.Based on the correlation of chronological age on structural sections,superimposed basins can be divided into five types in this study:(1)continuous sedimentation type superimposed basins,(2)middle and late stratigraphic superimposed basins,(3)early and late stratigraphic superimposed basins,(4)early and middle stratigraphic superimposed basins,and(5)long-term exposed superimposed basins.Multiple source-reservoir-caprock assemblages have developed in such basins.In addition,multi-stage hydrocarbon generation and expulsion,multiple sources,polycyclic hydrocarbon accumulation and multiple-type hydrocarbon reservoirs adjustment,reformation and destruction have occurred in these basins.The complex reservoirs that have been discovered widely in the superimposed basins to date have remarkably different geologic features from primary reservoirs,and the root causes of this are folding,denudation and the fracture effect caused by multiphase tectonic events in the superimposed basins as well as associated seepage,diffusion,spilling,oxidation,degradation and cracking.Based on their genesis characteristics,complex reservoirs are divided into five categories:(1)primary reservoirs,(2)trap adjustment type reservoirs,(3)component variant reservoirs,(4)phase conversion type reservoirs and(5)scale-reformed reservoirs.

  14. The role of reservoirs in global sediment budgets

    Science.gov (United States)

    Verstraeten, G.; Renwick, W.; Poesen, J.; de Vente, J.; Vinogradova, N.; Bazzoffi, P.; Lajczak, A.; Radoane, M.; Rey, F.

    2009-04-01

    Man-made reservoirs are an important sink for sediment eroded from the land and thus constitute an important aspect of the sediment budget. Their impact has mostly been assessed at the scale of an individual river basin but rarely on a continental or even a global scale. Although there are recent estimates of global sediment retention by dams, these studies have solely focussed on the role reservoirs play in controlling sediment fluxes to the oceans, thus on their net impact for global sediment budgets. However, the net impact of reservoirs is much larger than the gross amount of sediment stored within all reservoirs on the globe. Furthermore, the impact of smaller waterholding structures is mostly neglected. In this paper, we present a first comprehensive assessment of global annual sediment storage within reservoirs based on sedimentation rates obtained from over 3700 reservoirs, representing nearly 25% of the global storage capacity. We argue that at least 27 petagrams (Pg) sediment are stored annually in all larger reservoirs, with possible sediment retention of an additional 27 Pg in smaller man-made water bodies. These values are 2 to 4 times larger than the estimated sediment mass transported annually to the global coastal ocean, and 8 to 15 times larger than the net reduction of sediment flux to the oceans attributed to reservoirs. These estimates provide minimum annual continental erosion rates and comparison with soil erosion data suggest that soil erosion on agricultural land is not the dominant source of sediment deposited in reservoirs or exported to the ocean. In recent decades, reservoir sedimentation has become as least as important as floodplain sediment storage and can nowadays be considered as one of the most important sediment sinks in continental sediment budgets.

  15. Quantification of Hungry Horse Reservoir Water Levels Needed to Maintain or Enhance Reservoir Fisheries, 1985 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    May, Bruce

    1986-06-01

    The Pacific Northwest Electric Power Planning and Conservation Act, passed in 1980 by Congress, has provided a mechanism which integrates and provides for stable energy planning in the Pacific Northwest. The Act created the Northwest Power Planning Council and charged the Council with developing a comprehensive fish and wildlife program to protect and enhance fish and wildlife impacted by hydroelectric development in the Columbia River Basin. Bonneville Power Administration (BPA) is one of the many agencies implementing the Council's program. The Hungry Horse Reservoir (HHR) study is part of the Council's program. This study proposes to quantify seasonal water levels needed to maintain or enhance principal gamefish species in Hungry Horse Reservoir. The specific study objectives are: (1) Quantify the amount of reservoir habitat available at different water level elevations; (2) Estimate recruitment of westslope cutthroat trout juveniles from important spawning and nursery areas; (3) Determine the abundance, growth, distribution and use of available habitat by major game species in the reservoir; (4) Determine the abundance and availability of fish food organisms in the reservoir; (5) Quantify the seasonal use of available food items by major fish species; (6) Develop relationships between reservoir drawdown and reservoir habitat use by fish and fish food organisms; and (7) Estimate the impact of reservoir operation on major gamefish species.

  16. The impact of upstream water abstractions on reservoir yield: the case of the Orós Reservoir in Brazil

    NARCIS (Netherlands)

    van Oel, P.R.; Krol, Martinus S.; Hoekstra, Arjen Ysbert; de Araújo, José C.

    2008-01-01

    Water abstraction for irrigation upstream of a reservoir and its impact on reservoir yield and reliability are studied. Water demand and availability are strongly related in semi-arid environments where the irrigation sector is responsible for a large part of consumptive water use. Variations in

  17. Quantification of Hungry Horse Reservoir Water Levels Needed to Maintain or Enhance Reservoir Fisheries, 1983-1985 Summary Report.

    Energy Technology Data Exchange (ETDEWEB)

    May, Bruce

    1985-06-01

    The Pacific Northwest Electric Power Planning and Conservation Act passed in 1980 by Congress has provided a mechanism which integrates and provides for stable energy planning in the Pacific Northwest. The Act created the Northwest Power Planning Council and charged the Council with developing a comprehensive fish and wildlife program to protect and enhance fish and wildlife impacted by hydroelectric development in the Columbia River Basin. Implementation of the plan is being carried out by the Bonneville Power Administration. The Hungry Horse Reservoir study is part of that Council's plan. This study proposes to quantify seasonal water levels needed to maintain or enhance principal gamefish species in Hungry Horse Reservoir. The specific study objects are listed below. (1) Quantify the amount of reservoir habitat available at different water level elevations; (2) Estimate recruitment of westslope cutthroat trout juveniles from important spawning and nursery tributaries; (3) Determine the abundance, growth, distribution and use of available habitat by major game species in the reservoir; (4) Determine the abundance and availability of fish food organisms in the reservoir; (5) Quantify the seasonal use of available food items by major fish species; (6) Develop relationships between reservoir drawdown and reservoir habitat used by fish and fish food organisms; and (7) Estimate the impact of reservoir operation on major gamefish species.

  18. Quantification of Hungry Horse Reservoir Water Levels Needed to Maintain or Enhance Reservoir Fisheries, 1983-1985 Summary Report.

    Energy Technology Data Exchange (ETDEWEB)

    May, Bruce

    1985-06-01

    The Pacific Northwest Electric Power Planning and Conservation Act passed in 1980 by Congress has provided a mechanism which integrates and provides for stable energy planning in the Pacific Northwest. The Act created the Northwest Power Planning Council and charged the Council with developing a comprehensive fish and wildlife program to protect and enhance fish and wildlife impacted by hydroelectric development in the Columbia River Basin. Implementation of the plan is being carried out by the Bonneville Power Administration. The Hungry Horse Reservoir study is part of that Council's plan. This study proposes to quantify seasonal water levels needed to maintain or enhance principal gamefish species in Hungry Horse Reservoir. The specific study objects are listed below. (1) Quantify the amount of reservoir habitat available at different water level elevations; (2) Estimate recruitment of westslope cutthroat trout juveniles from important spawning and nursery tributaries; (3) Determine the abundance, growth, distribution and use of available habitat by major game species in the reservoir; (4) Determine the abundance and availability of fish food organisms in the reservoir; (5) Quantify the seasonal use of available food items by major fish species; (6) Develop relationships between reservoir drawdown and reservoir habitat used by fish and fish food organisms; and (7) Estimate the impact of reservoir operation on major gamefish species.

  19. Quantification of Libby Reservoir Water Levels Needed to Maintain or Enhance Reservoir Fisheries, 1988-1996 Methods and Data Summary.

    Energy Technology Data Exchange (ETDEWEB)

    Dalbey, Steven Ray

    1998-03-01

    The Libby Reservoir study is part of the Northwest Power Planning Council's resident fish and wildlife program. The program was mandated by the Northwest Planning Act of 1980, and is responsible for mitigating for damages to fish and wildlife caused by hydroelectric development in the Columbia River Basin. The objective of Phase I of the project (1983 through 1987) was to maintain or enhance the Libby Reservoir fishery by quantifying seasonal water levels and developing ecologically sound operational guidelines. The objective of Phase II of the project (1988 through 1996) was to determine the biological effects of reservoir operations combined with biotic changes associated with an aging reservoir. This report summarizes the data collected from Libby Reservoir during 1988 through 1996.

  20. Sixth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P. (eds.)

    1980-12-18

    INTRODUCTION TO THE PROCEEDINGS OF THE SIXTH GEOTHERMAL RESERVOIR ENGINEERING WORKSHOP, STANFORD GEOTHERMAL PROGRAM Henry J. Ramey, Jr., and Paul Kruger Co-Principal Investigators Ian G. Donaldson Program Manager Stanford Geothermal Program The Sixth Workshop on Geothermal Reservoir Engineering convened at Stanford University on December 16, 1980. As with previous Workshops the attendance was around 100 with a significant participation from countries other than the United States (18 attendees from 6 countries). In addition, there were a number of papers from foreign contributors not able to attend. Because of the success of all the earlier workshops there was only one format change, a new scheduling of Tuesday to Thursday rather than the earlier Wednesday through Friday. This change was in general considered for the better and will be retained for the Seventh Workshop. Papers were presented on two and a half of the three days, the panel session, this year on the numerical modeling intercomparison study sponsored by the Department of Energy, being held on the second afternoon. This panel discussion is described in a separate Stanford Geothermal Program Report (SGP-TR42). This year there was a shift in subject of the papers. There was a reduction in the number of papers offered on pressure transients and well testing and an introduction of several new subjects. After overviews by Bob Gray of the Department of Energy and Jack Howard of Lawrence Berkeley Laboratory, we had papers on field development, geopressured systems, production engineering, well testing, modeling, reservoir physics, reservoir chemistry, and risk analysis. A total of 51 papers were contributed and are printed in these Proceedings. It was, however, necessary to restrict the presentations and not all papers printed were presented. Although the content of the Workshop has changed over the years, the format to date has proved to be satisfactory. The objectives of the Workshop, the bringing together of

  1. Flood Transformation Effect of a System of Small Water Reservoirs

    Directory of Open Access Journals (Sweden)

    Václav Tlapák

    2015-01-01

    Full Text Available The paper resumes the investigation of transformation of watershed flow off caused by retention volumes of small water reservoirs (SWR in landscape. Based on our work experience in the field of water reservoir design and research, we know that simple system of even small fishponds disposes of nonnegligible free retention volume. We decided to verify this assumption with aid of exact determination of discharge transformation within the basin containing realized system of small water reservoirs. The input water management data for design of water reservoirs are represented by water discharge in existing stream related to the point of designed SWR. In the Czech Republic, the data are provided by the Czech Hydrometeorological Institute (CHMI, however the data refer to an unaffected discharges, i.e. without consideration of transformation effects of existing small water reservoirs within the basin. Although the total available volume for transformation purposes of investigated SWR system is relatively small, the results show the transformation effect of such reservoirs is not insignificant. Furthermore the transformation effect is raised by proper design and functionality of the whole system of water reservoirs.

  2. Tidal phenomena in reservoirs; Fenomeno de mare em reservatorios

    Energy Technology Data Exchange (ETDEWEB)

    Pinilla Cortes, John Freddy

    1997-06-01

    This work models the oceanic tidal effect on reservoirs by coupling geomechanic principles with equations for fluid in a deformable porous media. The coupling revealed the importance of establishing properly the system compressibility under the various possible configurations of the loading system. The basic models for infinite reservoir, constant outer-pressure reservoir and closed reservoir were considered. It was verified that it was possible to apply the superposition of effects on the solution for the basic models by carrying a simple transformation on the solution variable. The problem was treated by in the context of test analysis, concerning dimensionless form of variables and the inclusion of well effects. The solution for the infinite reservoir including tidal effects. The solution for the infinite reservoir including tidal effects was obtained in the Laplace space and was inverted numerically by using Crump's routine. The results were incorporated to conventional type curves, and were validated by comparison with real and simulated pressure test data. Finally, alternate practices were suggested to integrate the well test analysis in reservoirs affected by the tidal effect. (author)

  3. Large eddy simulation of a pumped- storage reservoir

    Science.gov (United States)

    Launay, Marina; Leite Ribeiro, Marcelo; Roman, Federico; Armenio, Vincenzo

    2016-04-01

    The last decades have seen an increasing number of pumped-storage hydropower projects all over the world. Pumped-storage schemes move water between two reservoirs located at different elevations to store energy and to generate electricity following the electricity demand. Thus the reservoirs can be subject to important water level variations occurring at the daily scale. These new cycles leads to changes in the hydraulic behaviour of the reservoirs. Sediment dynamics and sediment budgets are modified, sometimes inducing problems of erosion and deposition within the reservoirs. With the development of computer performances, the use of numerical techniques has become popular for the study of environmental processes. Among numerical techniques, Large Eddy Simulation (LES) has arisen as an alternative tool for problems characterized by complex physics and geometries. This work uses the LES-COAST Code, a LES model under development in the framework of the Seditrans Project, for the simulation of an Upper Alpine Reservoir of a pumped-storage scheme. Simulations consider the filling (pump mode) and emptying (turbine mode) of the reservoir. The hydraulic results give a better understanding of the processes occurring within the reservoir. They are considered for an assessment of the sediment transport processes and of their consequences.

  4. Putting integrated reservoir characterization into practice - in house training

    Energy Technology Data Exchange (ETDEWEB)

    Wright, F.M. Jr.; Best, D.A.; Clarke, R.T. [Mobile Exploration and Producing Technical Center, Dallas, TX (United States)

    1997-08-01

    The need for even more efficient reservoir characterization and management has forced a change in the way Mobil Oil provides technical support to its production operations. We`ve learned that to be successful, a good understanding of the reservoir is essential. This includes an understanding of the technical and business significance of reservoir heterogeneities at different stages of field development. A multi-disciplinary understanding of the business of integrated reservoir characterization is essential and to facilitate this understanding, Mobil has developed a highly successful {open_quotes}Reservoir Characterization Field Seminar{close_quotes}. Through specific team based case studies that incorporate outcrop examples and data the program provides participants the opportunity to explore historic and alternative approaches to reservoir description, characterization and management. We explore appropriate levels and timing of data gathering, technology applications, risk assessment and management practices at different stages of field development. The case studies presented throughout the course are a unique element of the program which combine real life and hypothetical problem sets that explore how different technical disciplines interact, the approaches to a problem solving they use, the assumptions and uncertainties contained in their contributions and the impact those conclusions may have on other disciplines involved in the overall reservoir management process. The team building aspect of the course was an added bonus.

  5. Intelligent Real-Time Reservoir Operation for Flood Control

    Science.gov (United States)

    Chang, L.; Hsu, H.

    2008-12-01

    Real-time flood control of a multi-purpose reservoir should consider decreasing the flood peak stage downstream and storing floodwaters for future usage during typhoon seasons. It is a continuous and instant decision-making process based on relevant operating rules, policy and water laws, in addition the immediate rainfall and the hydrology information; however, it is difficult to learn the intelligent experience from the elder operators. The main purpose of this study is to establish the automatic reservoir flood control model to achieve the goal of a reservoir operation during flood periods. In this study, we propose an intelligent reservoir operating methodology for real-time flood control. First, the genetic algorithm is used to search the optimal solutions, which can be considered as extracting the knowledge of reservoir operation strategies. Then, the adaptive network-based fuzzy inference system (ANFIS), which uses a hybrid learning procedure for extracting knowledge in the form of fuzzy if-then rules, is used to learn the input-output patterns and then to estimate the optimal flood operation. The Shihmen reservoir in Northern Taiwan was used as a case study, where its 26 typhoon events are investigated by the proposed method. The results demonstrate that the proposed control model can perform much better than the original reservoir operator in 26 flood events and effectively achieve decreasing peak flood stage downstream and storing floodwaters for future usage.

  6. Impact of pond and fence aquaculture on reservoir environment

    Directory of Open Access Journals (Sweden)

    Huai-dong ZHOU

    2011-03-01

    Full Text Available With the rapid development of aquaculture in lakes and reservoirs, its negative effects on water quality and aquatic organisms are clearly emerging. Toward a better understanding of these effects, chemical and biological monitoring was conducted in the Fangbian Reservoir to study the relationship between aquaculture and eutrophication. As a domestic water supply source, this reservoir has reached the mesotrophic level. The concentrations of total nitrogen (TN and total phosphorus (TP in the Fangbian Reservoir have frequently exceeded the prescriptive level according to the Environmental Quality Standards for Surface Water (GB3838-2002. Pond and fence aquaculture feeding is the main cause of high levels of nitrogen and phosphorus, accounting for nearly half of the total pollution, and causing the reservoir environmental capacity to be exceeded. The amounts of nitrogen and phosphorus that went directly to the reservoir through the residual bait and fish droppings in fence aquaculture were 42 768 kg per year and 10 856 kg per year respectively, from 2007 to 2009. About 2 913 kg of nitrogen and 450 kg of phosphorus were imported to the reservoir through the exchange of water from the culturing ponds at the same time. Therefore, controlling the aquaculture scale and promoting eco-aquaculture are key measures for lessening the eutrophication degree and improving the water quality.

  7. Time-lapse seismic imaging of the Reykjanes geothermal reservoir

    Science.gov (United States)

    Weemstra, Cornelis; Obermann, Anne; Blanck, Hanna; Verdel, Arie; Paap, Bob; Árni Guðnason, Egill; Páll Hersir, Gylfi; Jousset, Philippe; Sigurðsson, Ómar

    2016-04-01

    We report on the results obtained from a dense seismic deployment over a geothermal reservoir. The reservoir has been producing continuously for almost a decade and is located on the tip of the Reykjanes peninsula, SW Iceland. The seismic stations on top of the reservoir have continuously recorded the ambient seismic wavefield between April 2014 and September 2015. The density of the seismic network makes the data well suited for time-lapse seismic imaging of the reservoir. To that end we compute time-lapse responses through the application of seismic interferometry. These interferometric lapse responses are obtained by simple crosscorrelation of the seismic noise recorded by the different seismic stations. We subsequently evaluate the temporal variation of the coda of these crosscorrelations. The term coda refers to the later arriving, multiple scattered waves. The multiple scattering implies that these waves have sampled the subsurface very densely and hence become highly sensitive to tiny mechanical and structural changes in that subsurface. This sensitivity allows one, in principle at least, to monitor the geothermal reservoir. Preliminary results indeed suggest a relation between the temporal variation of the coda waves and the reservoir. Ultimately, this method may lead to a means to monitor a geothermal reservoir in both space and time.

  8. Large orthotopic reservoir stone burden: Role of open surgery

    Directory of Open Access Journals (Sweden)

    Madbouly Khaled

    2010-01-01

    Full Text Available Purpose: To present our experience in open poucholithotomy as a primary management of large orthotopic reservoir stone burden and discuss different management options. Materials and Methods: Records of men underwent radical cystectomy and orthotopic urinary diversion were retrospectively reviewed as regards pouch stone formation. Patients with large reservoir stone burden managed by open poucholithotomy were further selected. Results: Large reservoir stone burden was encountered in 12 post radical cystectomy men. All underwent open poucholithotomy as a primary management of their reservoir stones. Median age at cystectomy was 46 (range: 32-55 years with a median total follow up period of 214.15 (range: 147-257 months and a median interval to stone detection of 99 (range: 63-132 months. The median stone burden was 5260 (range: 3179-20410 mm 2 . All patients were continent during the day while 5 showed nocturnal enuresis; 2 of them became continent after removal of the stones. Post poucholithotomy, all patients had sterile urine cultures except one who showed occasional colonization. None of the 12 patients showed stone recurrence after poucholithotomy. Two patients underwent revision of a dessuscepted nipple valve in association with stone removal. Conclusions: Open poucholithotomy for large reservoir stone burden is a feasible and safe option. It saves the reservoir mesentery and adjacent bowel. It allows complete removal of the stone(s leaving no residual fragments. Furthermore, it permits correction of concomitant reservoir abnormalities.

  9. Multi-objective evolutionary algorithm for operating parallel reservoir system

    Science.gov (United States)

    Chang, Li-Chiu; Chang, Fi-John

    2009-10-01

    SummaryThis paper applies a multi-objective evolutionary algorithm, the non-dominated sorting genetic algorithm (NSGA-II), to examine the operations of a multi-reservoir system in Taiwan. The Feitsui and Shihmen reservoirs are the most important water supply reservoirs in Northern Taiwan supplying the domestic and industrial water supply needs for over 7 million residents. A daily operational simulation model is developed to guide the releases of the reservoir system and then to calculate the shortage indices (SI) of both reservoirs over a long-term simulation period. The NSGA-II is used to minimize the SI values through identification of optimal joint operating strategies. Based on a 49 year data set, we demonstrate that better operational strategies would reduce shortage indices for both reservoirs. The results indicate that the NSGA-II provides a promising approach. The pareto-front optimal solutions identified operational compromises for the two reservoirs that would be expected to improve joint operations.

  10. Nutrient budget for Saguling Reservoir, West Java, Indonesia.

    Science.gov (United States)

    Hart, Barry T; van Dok, Wendy; Djuangsih, Nani

    2002-04-01

    A preliminary nutrient budget for Saguling Reservoir is reported as a first attempt to quantify the behaviour of nutrients entering this reservoir. This work is part of a larger Indonesia-Australia collaborative research and training project, involving Padjadjaran University and Monash University, established to study nutrient dynamics in Saguling Reservoir. Saguling Reservoir, the first of a chain of three large reservoirs (Saguling, Cirata and Jatilahur), built on the Citarum River in central Java, was completed in 1985. It has already become highly polluted, particularly with domestic and industrial effluent (organic matter, nutrients, heavy metals) from the urban areas of Bandung (population 2 million). The reservoir experiences major water quality problems, including excessive growths of floating plants, toxic cyanobacterial blooms and regular fish-kills. The work reported in this paper shows that Saguling receives a very large nutrient load from the city of Bandung and because of this, is highly eutrophic. It is unlikely that the water quality of Saguling will improve until a substantial part of Bandung is sewered and adequate discharge controls are placed on the many industries in the region upstream of the reservoir.

  11. Reservoir simulation and geochemical study of Cerro Prieto I wells

    Energy Technology Data Exchange (ETDEWEB)

    Lippmann, M.J. (Lawrence Berkeley Lab., CA (USA)); Truesdell, A.H. (Geological Survey, Menlo Park, CA (USA))

    1990-03-01

    Combined reservoir simulation and geochemical data analysis are used to investigate the effects of recharge and other reservoir processes occurring in the western part of the Cerro Prieto, Mexico, geothermal field (i.e., Cerro Prieto I area). Enthalpy-based temperatures and bottomhole temperatures are calculated based on simplified models of the system, considering different reservoir boundary conditions and zones of contrasting initial temperatures and reservoir properties. By matching the computed trends with geothermometer-based temperature and enthalpy histories of producing wells, the main processes active in the western area of Cerro Prieto are identified. This part of the geothermal system is strongly influenced by nearby groundwater aquifers; cooler waters readily recharge the reservoirs. In response to exploitation, the natural influx of cold water into the shallower alpha reservoir is mainly from the west and down Fault L, while the recharge to the deeper beta reservoir in this part of the field, seems to be only lateral, from the west and possibly south. 11 refs., 12 figs.

  12. TROPHIC STATE OF SMALL RETENTION RESERVOIRS IN PODLASIE VOIVODESHIP

    Directory of Open Access Journals (Sweden)

    Joanna Szczykowska

    2017-09-01

    Full Text Available The study was carried out using water samples from two small retention reservoirs located in the communes: Czarna Białostocka and Turośń Kościelna in Podlaskie Voivodeship. The main tasks of both reservoirs are to improve the water balance by means of regulating the levels and water outflow. Three characteristic measurement and control points were selected on both reservoirs in accordance to the water flow in the longitudinal section. The first and third points were located near the inflow and outflow of water, while the second in the middle of the reservoirs. Samples of water for the study were collected from the surface layer of the shore zone of the reservoirs once a month from March 2015 to February 2017 (water from two hydrological years was analyzed. Water samples were subject to determination of total phosphorus, total nitrogen, and chlorophyll “a” concentrations, as well as turbidity. Contamination of the water reservoirs with biogenic compounds is a common problem and at the same time difficult to eliminate due to the scattered nature of external sources of pollution, especially in the case of agricultural catchments, as well as the inflow of untreated sewage from areas directly adjacent to the reservoirs. Based on achieved results, high values of TSI (TN, TSI (TP, TSI (Chl, and overall TSI, clearly indicate the progressive degradation of water quality in analyzed reservoirs. Appearing water blooms due to the mass development of phytoplankton adversely affect the quality of water in the reservoirs and biochemical processes occurring both in water and bottom sediments, are conditioned by progressive eutrophication.

  13. Sediment problems in reservoirs. Control of sediment deposits

    Energy Technology Data Exchange (ETDEWEB)

    Jacobsen, Tom

    1997-12-31

    When a reservoir is formed on a river, sediment will deposit in the reservoir. Such processes are unfortunate, for instance, for the implementation of hydroelectric energy. This thesis studies the problem of reservoir sedimentation and discusses methods of removing the sediments. Various aspects of reservoir sedimentation are discussed. Anthropogenic impacts seem to greatly affect the erosion processes. Temporal distribution is uneven, mainly because of the very large flood events. A world map showing the Reservoir Capacity: Annual Sediment Inflow ratio for reservoirs with volume equal to 10% of annual inflow has been prepared. The map shows that sedimentation is severe in the western parts of North and South America, eastern, southern and northern Africa, parts of Australia and most of Asia. The development of medium-sized reservoirs is difficult, as they are too large for conventional flushing technique and too small to store the sediment that accumulates during their economic lifetime. A computer model, SSIIM, was used with good results in a case study of two flood drawdown trials in Lake Roxburg, New Zealand. Two techniques have been developed that permits controlled suction of sediment and water into a pipe: the Slotted Pipe Sediment Sluicer (SPSS) and the Saxophone Sediment Sluicer (SSS). The techniques exploit the inflow pattern in through a slot in a pipe. An equation describing this inflow pattern was derived and verified experimentally. The SPSS is fixed near the reservoir bed, and sediment that deposits on top of it is removed in the sluicing process. The SSS sluices sediment from the surface of the sediment deposits. Some technical and economic conditions affecting the economics of sediment removal from reservoirs have been identified and studied. 79 refs., 112 figs., 14 tabs.

  14. Design of a lube oil reservoir by using flow calculations

    Energy Technology Data Exchange (ETDEWEB)

    Rinkinen, J.; Alfthan, A. [Institute of Hydraulics and Automation IHA, Tampere University of Technology, Tampere (Finland)] Suominen, J. [Institute of Energy and Process Engineering, Tampere University of Technology, Tampere (Finland); Airaksinen, A.; Antila, K. [R and D Engineer Safematic Oy, Muurame (Finland)

    1997-12-31

    The volume of usual oil reservoir for lubrication oil systems is designed by the traditional rule of thumb so that the total oil volume is theoretically changed in every 30 minutes by rated pumping capacity. This is commonly used settling time for air, water and particles to separate by gravity from the oil returning of the bearings. This leads to rather big volumes of lube oil reservoirs, which are sometimes difficult to situate in different applications. In this presentation traditionally sized lube oil reservoir (8 m{sup 3}) is modelled in rectangular coordinates and laminar oil flow is calculated by using FLUENT software that is based on finite difference method. The results of calculation are velocity and temperature fields inside the reservoir. The velocity field is used to visualize different particle paths through the reservoir. Particles that are studied by the model are air bubbles and water droplets. The interest of the study has been to define the size of the air bubbles that are released and the size of the water droplets that are separated in the reservoir. The velocity field is also used to calculate the modelled circulating time of the oil volume which is then compared with the theoretical circulating time that is obtained from the rated pump flow. These results have been used for designing a new lube oil reservoir. This reservoir has also been modelled and optimized by the aid of flow calculations. The best shape of the designed reservoir is constructed in real size for empirical measurements. Some results of the oil flow measurements are shown. (orig.) 7 refs.

  15. Global Assessment of Exploitable Surface Reservoir Storage under Climate Change

    Science.gov (United States)

    Liu, L.; Parkinson, S.; Gidden, M.; Byers, E.; Satoh, Y.; Riahi, K.

    2016-12-01

    Surface water reservoirs provide us with reliable water supply systems, hydropower generation, flood control, and recreation services. Reliable reservoirs can be robust measures for water security and can help smooth out challenging seasonal variability of river flows. Yet, reservoirs also cause flow fragmentation in rivers and can lead to flooding of upstream areas, thereby displacing existing land-uses and ecosystems. The anticipated population growth, land use and climate change in many regions globally suggest a critical need to assess the potential for appropriate reservoir capacity that can balance rising demands with long-term water security. In this research, we assessed exploitable reservoir potential under climate change and human development constraints by deriving storage-yield relationships for 235 river basins globally. The storage-yield relationships map the amount of storage capacity required to meet a given water demand based on a 30-year inflow sequence. Runoff data is simulated with an ensemble of Global Hydrological Models (GHMs) for each of five bias-corrected general circulation models (GCMs) under four climate change pathways. These data are used to define future 30-year inflows in each river basin for time period between 2010 and 2080. The calculated capacity is then combined with geographical information of environmental and human development exclusion zones to further limit the storage capacity expansion potential in each basin. We investigated the reliability of reservoir potentials across different climate change scenarios and Shared Socioeconomic Pathways (SSPs) to identify river basins where reservoir expansion will be particularly challenging. Preliminary results suggest large disparities in reservoir potential across basins: some basins have already approached exploitable reserves, while some others display abundant potential. Exclusions zones pose significant impact on the amount of actual exploitable storage and firm yields

  16. Sixteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1991-01-25

    The Sixteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 23-25, 1991. The Workshop Banquet Speaker was Dr. Mohinder Gulati of UNOCAL Geothermal. Dr. Gulati gave an inspiring talk on the impact of numerical simulation on development of geothermal energy both in The Geysers and the Philippines. Dr. Gulati was the first recipient of The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy. Dr. Frank Miller presented the award. The registered attendance figure of one hundred fifteen participants was up slightly from last year. There were seven foreign countries represented: Iceland, Italy, Philippines, Kenya, the United Kingdom, Mexico, and Japan. As last year, papers on about a dozen geothermal fields outside the United States were presented. There were thirty-six papers presented at the Workshop, and two papers were submitted for publication only. Attendees were welcomed by Dr. Khalid Aziz, Chairman of the Petroleum Engineering Department at Stanford. Opening remarks were presented by Dr. Roland Horne, followed by a discussion of the California Energy Commission's Geothermal Activities by Barbara Crowley, Vice Chairman; and J.E. ''Ted'' Mock's presentation of the DOE Geothermal Program: New Emphasis on Industrial Participation. Technical papers were organized in twelve sessions concerning: hot dry rock, geochemistry, tracer injection, field performance, modeling, and chemistry/gas. As in previous workshops, session chairpersons made major contributions to the program. Special thanks are due to Joel Renner, Jeff Tester, Jim Combs, Kathy Enedy, Elwood Baldwin, Sabodh Garg, Marcel0 Lippman, John Counsil, and Eduardo Iglesias. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Angharad Jones, Rosalee Benelli, Jeanne Mankinen, Ted Sumida, and Terri A. Ramey who also

  17. Nineteenth workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W. (Stanford Geothermal Program)

    1994-01-20

    PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who

  18. CALIBRATION OF SEISMIC ATTRIBUTES FOR RESERVOIR CHARACTERIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Wayne D. Pennington

    2001-04-01

    The project, ''Calibration of Seismic Attributes for Reservoir Calibration,'' is on schedule and making unplanned discoveries in addition to those intended when the project commenced. The discoveries, planned and unplanned, can be grouped into four classes: pitfalls to avoid in interpretation of seismic attributes; suggested workflows to follow in working with seismic attributes; new methods of calculating certain new attributes which we feel to be useful; and new theoretical approaches to certain petrophysical properties. We are using data from Wyoming, North Texas, South Texas, and the Gulf of Mexico offshore of Louisiana. These environments provide a diverse array of physical conditions and rock types, and a variety of interpretation methods to be applied to them. The Wyoming field is a very difficult one, including alternating layers of thin beds of coals, shales, and hard sandstones, and there may be an observable effect due to hydrocarbon production; we are using this field as the ''test'' of those techniques and methods we have developed or that we prefer based on our work on the other fields. Work on this field is still underway, although progressing nicely. The work on the public domain data sets in Texas, Boonsville and Stratton, is complete except for some minor additional processing steps, and final write-ups are underway. The work on the Gulf of Mexico field has been completed to the extent originally planned, but it has led us to such important new observations and discoveries that we have expanded our original scope to include time-lapse studies and petrophysical aspects of pressure changes; work on this expanded scope is continuing. Presentations have been made at professional-society meetings, company offices, consortium workshops, and university settings. Papers, including one review paper on ''Reservoir Geophysics'' have been published. Several Master's theses, which will spin off

  19. Monomethylmercury sources in a tropical artificial reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Muresan, Bogdan [Institut francais de recherche pour l' exploitation durable de la mer (IFREMER), BP 21105, F.44311 Nantes cedex 3 (France); Cossa, Daniel [Institut francais de recherche pour l' exploitation durable de la mer (IFREMER), BP 21105, F.44311 Nantes cedex 3 (France)], E-mail: dcossa@ifremer.fr; Richard, Sandrine [HYDRECO, Laboratoire de Petit-Saut, BP 823, F.97388 Kourou, French Guiana (France); Dominique, Yannick [Laboratoire d' ecophysiologie et d' ecotoxicologie des systemes aquatiques (LEESA), CNRS 5805, F.33120 Arcachon (France)

    2008-05-15

    The distribution and speciation of mercury (Hg) in the water column, the inputs (wet deposition and tributaries) and the outputs (atmospheric evasion and outlet) of an artificial partially anoxic tropical lake (Petit-Saut reservoir, French Guiana) were investigated on a seasonal basis in order to appraise the cycling and transformations of this metal. The total mercury (HgT) concentrations in the oxygenated epilimnetic waters averaged 5 {+-} 3 pmol L{sup -1} in the unfiltered samples (HgT{sub UNF}) and 4 {+-} 2 pmol L{sup -1} in the dissolved (HgT{sub D}) phase (<0.45 {mu}m). On average, the monomethylmercury (MMHg) constituted 8%, 40% and 18% of the HgT in the dissolved phase, the particulate suspended matter and in the unfiltered samples, respectively. Covariant elevated concentrations of particulate MMHg and chlorophyll a in the epilimnion suggest that phytoplankton is an active component for the MMHg transfer in the lake. In the anoxic hypolimnion the HgT{sub UNF} averages 13 {+-} 6 pmol L{sup -1} and the HgT{sub D} 8 {+-} 4 pmol L{sup -1}. The averages of MMHg{sub P} and MMHg{sub D} in hypolimnetic waters were two and three times the corresponding values of the epilimnion, 170 {+-} 90 pmol g{sup -1} and 0.9 {+-} 0.5 pmol L{sup -1}, respectively. In the long dry and wet seasons, at the flooded forest and upstream dam sampling stations, the vertical profiles of MMHg{sub D} concentrations accounted for two distinct maxima: one just below the oxycline and the other near the benthic interface. Direct wet atmospheric deposition accounted for 14 moles yr{sup -1} HgT{sub UNF}, with 0.7 moles yr{sup -1} as MMHg{sub UNF}, while circa 76 moles yr{sup -1} of HgT{sub UNF}, with 4.7 moles yr{sup -1} as MMHg{sub UNF}, coming from tributaries. Circa 78 moles ({approx}17% as MMHg) are annually exported through the dam, while 23 moles yr{sup -1} of Hg{sup 0} evolve in the atmosphere. A mass balance calculation suggests that the endogenic production of MMHg{sub UNF} attained 8

  20. Net greenhouse gas emissions at Eastmain-1 reservoir, Quebec, Canada

    Energy Technology Data Exchange (ETDEWEB)

    Tremblay, Alain; Bastien, Julie; Bonneville, Marie-Claude; del Giorgio, Paul; Demarty, Maud; Garneau, Michelle; Helie, Jean-Francois; Pelletier, Luc; Prairie, Yves; Roulet, Nigel; Strachan, Ian; Teodoru, Cristian

    2010-09-15

    The growing concern regarding the long-term contribution of freshwater reservoirs to atmospheric greenhouse gases (GHG), led Hydro-Quebec, to study net GHG emissions from Eastmain 1 reservoir, which are the emissions related to the creation of a reservoir minus those that would have been emitted or absorbed by the natural systems over a 100-year period. This large study was realized in collaboration with University du Quebec a Montreal, McGill University and Environnement IIlimite Inc. This is a world premiere and the net GHG emissions of EM-1 will be presented in details.

  1. SUCCESSION OF LITTORAL ZOOPLANKTON COMMUNITIES OF THE BAKSHALYNSKE RESERVOIR

    Directory of Open Access Journals (Sweden)

    V. Trokhymets

    2016-09-01

    Full Text Available Purpose. The most pressing current environmental issues of scientific research include the studies of ecosystems altered by human impact. Aquatic ecosystems are important for the stable functioning of communal, industrial, agricultural and energy sectors. One of the typical examples of human impact on aquatic ecosystems is the transformation of river systems in the cascades of reservoirs. In southern Ukraine, there is a South Ukrainian energy complex, for the optimization of functioning of which the lower part of the Bakshala river was transformed into the Bakshalinske reservoir. The aim of this work was to study the succession of changes that occur in the reservoir using the littoral zooplankton communities as an example. These aquatic organisms are basic ecological group, sensitive to changes in their habitats. Methodology. When collecting and preserving samples of littoral zooplankton and its subsequent processing and analysis in the laboratory, we used both the standard methods and an original method of the standardization of the selection of monitoring stations depending on the type and size of the reservoir. Findings. The paper examines the peculiarities of succession processes in a small canyon-shaped Bakshalynske reservoir at different stages of the formation and functioning of its biota. The peculiarities of the succession of zooplanktonic cenoses in this reservoir were investigated by analyzing the changes in species diversity, faunal, ecological and trophic spectra, quantitative indicators, dominant communities and complexes of littoral zooplanktonic species. Originality. The data on zooplankton and other groups of aquatic organisms for the Bakshalynske reservoir are absent, so all provided data are original and have a scientific novelty. In addition, when collecting the material, we used new methodological approaches regarding the standardization of the selection of monitoring stations depending on the type and size of the reservoir

  2. Simulation of water temperature distribution in Fenhe Reservoir

    Institute of Scientific and Technical Information of China (English)

    Shu-fang FAN; Min-quan FENG; Zhao LIU

    2009-01-01

    In order to evaluate the need of controlling the temperature of water discharged from the Fenhe Reservoir, the reservoir water temperature distribution was examined. A three-dimensional mathematical model was used to simulate the in-plane and vertical distribution of water temperature. The parameters of the model were calibrated with field data of the temperature distribution in the Fenhe Reservoir. The simulated temperature of discharged water is consistent with the measured data. The difference in temperature between the discharged water and the natural river channel is less than 3℃ under the current operating conditions. This will not significantly impact the environment of downstream areas.

  3. Uniform Approximation of a Maxwellian Thermostat by Finite Reservoirs

    Science.gov (United States)

    Bonetto, F.; Loss, M.; Tossounian, H.; Vaidyanathan, R.

    2017-04-01

    We study a system of M particles in contact with a large but finite reservoir of {N ≫ M} particles within the framework of the Kac master equation modeling random collisions. The reservoir is initially in equilibrium at temperature {T=β^{-1}}. We show that for large N, this evolution can be approximated by an effective equation in which the reservoir is described by a Maxwellian thermostat at temperature T. This approximation is proven for a suitable {L^2} norm as well as for the Gabetta-Toscani-Wennberg (GTW) distance and is uniform in time.

  4. Entropy production and thermodynamic power of the squeezed thermal reservoir

    Science.gov (United States)

    Manzano, Gonzalo; Galve, Fernando; Zambrini, Roberta; Parrondo, Juan M. R.

    2016-05-01

    We analyze the entropy production and the maximal extractable work from a squeezed thermal reservoir. The nonequilibrium quantum nature of the reservoir induces an entropy transfer with a coherent contribution while modifying its thermal part, allowing work extraction from a single reservoir, as well as great improvements in power and efficiency for quantum heat engines. Introducing a modified quantum Otto cycle, our approach fully characterizes operational regimes forbidden in the standard case, such as refrigeration and work extraction at the same time, accompanied by efficiencies equal to unity.

  5. Reservoir-induced decoherence of resonantly excited confined polaritons

    Science.gov (United States)

    Ouellet-Plamondon, C.; Sallen, G.; Morier-Genoud, F.; Oberli, D. Y.; Portella-Oberli, M. T.; Deveaud, B.

    2017-02-01

    We report on the effect of decoherence on polariton bistability. The polariton hysteresis loop is shown to collapse in a similar way when increasing the temperature or under nonresonant excitation power. The hysteresis upward threshold is pulled to lower excitation power, whereas the downward threshold remains almost constant. This effect is explained by the population of an incoherent reservoir that induces dephasing and repulsive interaction that saturates at large densities. All experimental findings are accurately simulated with the excitonic Bloch equations and indicate that reservoir-induced dephasing can be dominant over the reservoir-induced energy blueshift.

  6. Simulation of water temperature distribution in Fenhe Reservoir

    Directory of Open Access Journals (Sweden)

    Shu-fang FAN

    2009-06-01

    Full Text Available Abstract: In order to evaluate the need of controlling the temperature of water discharged from the Fenhe Reservoir, the reservoir water temperature distribution was examined. A three-dimensional mathematical model was used to simulate the in-plane and vertical distribution of water temperature. The parameters of the model were calibrated with field data of the temperature distribution in the Fenhe Reservoir. The simulated temperature of discharged water is consistent with the measured data. The difference in temperature between the discharged water and the natural river channel is less than 3℃ under the current operating conditions. This will not significantly impact the environment of downstream areas.

  7. Reservoir Characteristic of Famennian Deposits of the Solikamsk Depression

    Directory of Open Access Journals (Sweden)

    A. V. Plyusnin

    2015-06-01

    Full Text Available The article describes the reservoir rock properties of Famennian (Late Devonian reef carbonate strata obtained by core study at boreholes № 1-4 of the Sukharev oil field. Based on the results of detailed study of lithological features of productive strata, authors defined the structural types and composed their description. The characteristics of the porosity and permeability of oil-bearing beds were shown. In a result of studies, the structure and main lithotypes of Famennian portion of reservoir were determined that allowed predicting the spatial distribution of reservoir properties within oilfield area.

  8. A SEMI-ANALYTICAL SOLUTION FOR CHARACTERISTICS OF A DAM-RESERVOIR SYSTEM WITH ABSORPTIVE RESERVOIR BOTTOM

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In this study, a semi-analytical formulation based on the Scaled Boundary Finite Element Method (SBFEM) was proposed and used to obtain the solution for the characteristics of a two-dimensional dam-reservoir system with absorptive reservoir bottom in the frequency domain. For simplicity, the dam with arbitrary upstream faces was assumed to be rigid and was subjected to a horizontal ground acceleration, while the reservoir with absorptive bottom was assumed to be semi-infinite. The reservoir was divided into two sub-domains: a near-field sub-domain and a far-field sub-domain. The near-field sub-domain with arbitrary geometry was modelled by the Finite Element Method (FEM), while the effects of the far-field sub-domain which was assumed to be horizontal were described by a semi-analytical formation. The semi-analytical formulation involved the effect of absorptive reservoir bottom, as well as the radiation damping effect of a semi-infinite reservoir. A FEM/SBFEM coupling formulation was presented to solve dam-reservoir coupled problems. The accuracy and efficiency of the coupling formulation were demonstrated by computing some benchmark examples. Highly accurate results are produced even if the near-field sub-domain is very small.

  9. Production decline analysis for a multi-fractured horizontal well considering elliptical reservoir stimulated volumes in shale gas reservoirs

    Science.gov (United States)

    Wei, Mingqiang; Duan, Yonggang; Fang, Quantang; Zhang, Tiantian

    2016-06-01

    Multi-fractured horizontal wells (MFHWs) are an effective technique for developing shale gas reservoirs. After fracturing, stimulated reservoir volumes (SRVs) invariably exist around the wellbore. In this paper, a composite elliptical SRV model for each hydraulic fracturing stage is established, based on micro-seismic events. Both the SRV and the outer regions are assumed as single-porosity media with different formation physical parameters. Based on unstructured perpendicular bisection (PEBI) grids, a mathematical model considering Darcy flow, diffusion and adsorption/desorption in shale gas reservoirs is presented. The numerical solution is obtained by combining the control volume finite element method with the fully implicit method. The model is verified by a simplified model solution. The MFHW Blasingame production decline curves, which consider elliptical SRVs in shale gas reservoirs, are plotted by computer programming. The flow regions can be divided into five flow regimes: early formation linear flow, radial flow in the SRV region, transient flow, pseudo radial flow and boundary dominated flow. Finally, the effect of six related parameters, including the SRV area size, outer region permeability, SRV region permeability, Langmuir pressure, Langmuir volume and diffusion coefficient, are analyzed on type curves. The model presented in this paper can expand our understanding of MFHW production decline behaviors in shale gas reservoirs and can be applied to estimate reservoir properties, the SRV area, and reserves in these types of reservoirs by type curve matching.

  10. Bioemulsan Production by Iranian Oil Reservoirs Microorganisms

    Directory of Open Access Journals (Sweden)

    A Amiriyan, M Mazaheri Assadi, VA Saggadian, A Noohi

    2004-10-01

    Full Text Available The biosurfactants are believed to be surface active components that are shed into the surrounding medium during the growth of the microorganisms. The oil degrading microorganism Acinetobacter calcoaceticus RAG-1 produces a poly-anionic biosurfactant, hetero-polysaccharide bioemulsifier termed as emulsan which forms and stabilizes oil-water emulsions with a variety of hydrophobic substrates. In the present paper results of the possibility of biosurfactant (Emulsan production by microorganisms isolated from Iranian oil reservoirs is presented. Fourthy three gram negative and gram positive, non fermentative, rod bacilli and coccobacilli shaped baceria were isolated from the oil wells of Bibi Hakimeh, Siri, Maroon, Ilam , East Paydar and West Paydar. Out of the isolated strains, 39 bacterial strains showed beta haemolytic activity, further screening revealed the emulsifying activity and surface tension. 11 out of 43 tested emulsifiers were identified as possible biosurfactant producers and two isolates produced large surface tension reduction, indicating the high probability of biosurfactant production. Further investigation revealed that, two gram negative, oxidase negative, aerobic and coccoid rods isolates were the best producers and hence designated as IL-1, PAY-4. Whole culture broth of isolates reduced surface tension from 68 mN /m to 30 and 29.1mN/m, respectively, and were stable during exposure to high salinity (10%NaCl and elevated temperatures(120C for 15 min .

  11. Assessing reservoir operations risk under climate change

    Science.gov (United States)

    Brekke, L.D.; Maurer, E.P.; Anderson, J.D.; Dettinger, M.D.; Townsley, E.S.; Harrison, A.; Pruitt, T.

    2009-01-01

    Risk-based planning offers a robust way to identify strategies that permit adaptive water resources management under climate change. This paper presents a flexible methodology for conducting climate change risk assessments involving reservoir operations. Decision makers can apply this methodology to their systems by selecting future periods and risk metrics relevant to their planning questions and by collectively evaluating system impacts relative to an ensemble of climate projection scenarios (weighted or not). This paper shows multiple applications of this methodology in a case study involving California's Central Valley Project and State Water Project systems. Multiple applications were conducted to show how choices made in conducting the risk assessment, choices known as analytical design decisions, can affect assessed risk. Specifically, risk was reanalyzed for every choice combination of two design decisions: (1) whether to assume climate change will influence flood-control constraints on water supply operations (and how), and (2) whether to weight climate change scenarios (and how). Results show that assessed risk would motivate different planning pathways depending on decision-maker attitudes toward risk (e.g., risk neutral versus risk averse). Results also show that assessed risk at a given risk attitude is sensitive to the analytical design choices listed above, with the choice of whether to adjust flood-control rules under climate change having considerably more influence than the choice on whether to weight climate scenarios. Copyright 2009 by the American Geophysical Union.

  12. Animal reservoirs of visceral leishmaniasis in India.

    Science.gov (United States)

    Singh, Niti; Mishra, Jyotsna; Singh, Ram; Singh, Sarman

    2013-02-01

    Visceral leishmaniasis (VL) is a disease that has both zoonotic and anthroponotic etiologies. In India, VL is endemic, considered to be anthroponotic, and caused by Leishmania donovani . Anthroponotic diseases are maintained by transmission from human to human and to a lesser extent from human to animals. Serum samples from 1,220 animals from 7 human VL endemic districts of Bihar, India, were tested for antibodies to a recombinant kinetoplast antigen (rK39 antigen) present in amastigotes of visceralizing Leishmania species, i.e., L. donovani complex. Additionally, PCR was used to examine samples positive by rK39 antigen serology. Antibodies to rK39 indicative of VL were detected in 33 of 1,220 animals. Thirty-one of 867 goats (Capra hircus), 1 of 161 cattle (Bos indicus), and 1 of 54 wild rats (Rattus sp.) were positive by rK39 serology. None of 106 chickens (Gallus domesticus), 26 sheep (Ovis aries), 3 water buffaloes (Bubalus bubalus), or 3 dogs (Canis familiaris) was positive by rK39 serology. Leishmania donovani DNA was detected by PCR in 20 rK39 positive blood samples from goats and 1 sample from a cow. The present study indicates that goats are potential animal reservoirs of human VL in India.

  13. Comparing Simple Flood Reservoir Operation Rules

    Directory of Open Access Journals (Sweden)

    James Connaughton

    2014-09-01

    Full Text Available The effectiveness of three simple flood operating rules in reducing the peak flow is compared for four simplified hydrograph shapes. The Minimize Flood Peak rule uses available flood storage capacity to store peak flows from an accurate hydrograph forecast. The less demanding Minimize Flooding Frequency operating rule releases water at or below channel capacity until the flood storage pool is filled and outflows are forced to exceed the channel capacity. The Short Forecast Peak Minimization rule minimizes flood peak over a short foreseeable future with existing flood storage capacity. Four simplified hydrograph shapes (triangular, abrupt wave, flood pulse and broad peak were used. The Minimize Flood Peak rule reduces peak flows better than alternatives, but is often impractical. The Short Forecast Peak Minimization rule reduces peak flows for a wide range of conditions. The Minimize Flood Frequency rule may be more relevant where damages occur abruptly, as in many leveed systems. All rules reduce peak outflow more efficiently for more steeply rising hydrographs. The approach suggests some general insights for flood operations of reservoirs.

  14. Statistical modeling of geopressured geothermal reservoirs

    Science.gov (United States)

    Ansari, Esmail; Hughes, Richard; White, Christopher D.

    2017-06-01

    Identifying attractive candidate reservoirs for producing geothermal energy requires predictive models. In this work, inspectional analysis and statistical modeling are used to create simple predictive models for a line drive design. Inspectional analysis on the partial differential equations governing this design yields a minimum number of fifteen dimensionless groups required to describe the physics of the system. These dimensionless groups are explained and confirmed using models with similar dimensionless groups but different dimensional parameters. This study models dimensionless production temperature and thermal recovery factor as the responses of a numerical model. These responses are obtained by a Box-Behnken experimental design. An uncertainty plot is used to segment the dimensionless time and develop a model for each segment. The important dimensionless numbers for each segment of the dimensionless time are identified using the Boosting method. These selected numbers are used in the regression models. The developed models are reduced to have a minimum number of predictors and interactions. The reduced final models are then presented and assessed using testing runs. Finally, applications of these models are offered. The presented workflow is generic and can be used to translate the output of a numerical simulator into simple predictive models in other research areas involving numerical simulation.

  15. The evolution of the marine phosphate reservoir.

    Science.gov (United States)

    Planavsky, Noah J; Rouxel, Olivier J; Bekker, Andrey; Lalonde, Stefan V; Konhauser, Kurt O; Reinhard, Christopher T; Lyons, Timothy W

    2010-10-28

    Phosphorus is a biolimiting nutrient that has an important role in regulating the burial of organic matter and the redox state of the ocean-atmosphere system. The ratio of phosphorus to iron in iron-oxide-rich sedimentary rocks can be used to track dissolved phosphate concentrations if the dissolved silica concentration of sea water is estimated. Here we present iron and phosphorus concentration ratios from distal hydrothermal sediments and iron formations through time to study the evolution of the marine phosphate reservoir. The data suggest that phosphate concentrations have been relatively constant over the Phanerozoic eon, the past 542 million years (Myr) of Earth's history. In contrast, phosphate concentrations seem to have been elevated in Precambrian oceans. Specifically, there is a peak in phosphorus-to-iron ratios in Neoproterozoic iron formations dating from ∼750 to ∼635 Myr ago, indicating unusually high dissolved phosphate concentrations in the aftermath of widespread, low-latitude 'snowball Earth' glaciations. An enhanced postglacial phosphate flux would have caused high rates of primary productivity and organic carbon burial and a transition to more oxidizing conditions in the ocean and atmosphere. The snowball Earth glaciations and Neoproterozoic oxidation are both suggested as triggers for the evolution and radiation of metazoans. We propose that these two factors are intimately linked; a glacially induced nutrient surplus could have led to an increase in atmospheric oxygen, paving the way for the rise of metazoan life.

  16. Expanding solvent SAGD in heavy oil reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Govind, P.A. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[ConocoPhillips Canada Resources Corp., Calgary, AB (Canada); Das, S.; Wheeler, T.J. [Society of Petroleum Engineers, Richardson, TX (United States)]|[ConocoPhillips Co., Houston, TX (United States); Srinivasan, S. [Society of Petroleum Engineers, Richardson, TX (United States)]|[Texas Univ., Austin, TX (United States)

    2008-10-15

    Steam assisted gravity drainage (SAGD) projects have proven effective for the recovery of oil and bitumen. Expanding solvent (ES) SAGD pilot projects have also demonstrated positive results of improved performance. This paper presented the results of a simulation study that investigated several important factors of the ES-SAGD process, including solvent types; concentration; operating pressure; and injection strategy. The objectives of the study were to examine the effectiveness of the ES-SAGD process in terms of production acceleration and energy requirements; to optimize solvent selection; to understand the effect of dilation in unconsolidated oil sands and the directional impact on reservoir parameters and oil production rate in ES-SAGD; and to understand the impact of operating conditions such as pressure, solvent concentration, circulation preheating period and the role of conduction heating and grid size in this process. The advantages of ES-SAGD over SAGD were also outlined. The paper presented results of sensitivity studies that were conducted on these four factors. Conclusions and recommendations for operating strategy were also offered. It was concluded that dilation is an important factor for SAGD performance at high operating pressure. 8 refs., 15 figs.

  17. Adenoid Reservoir for Pathogenic Biofilm Bacteria▿

    Science.gov (United States)

    Nistico, L.; Kreft, R.; Gieseke, A.; Coticchia, J. M.; Burrows, A.; Khampang, P.; Liu, Y.; Kerschner, J. E.; Post, J. C.; Lonergan, S.; Sampath, R.; Hu, F. Z.; Ehrlich, G. D.; Stoodley, P.; Hall-Stoodley, L.

    2011-01-01

    Biofilms of pathogenic bacteria are present on the middle ear mucosa of children with chronic otitis media (COM) and may contribute to the persistence of pathogens and the recalcitrance of COM to antibiotic treatment. Controlled studies indicate that adenoidectomy is effective in the treatment of COM, suggesting that the adenoids may act as a reservoir for COM pathogens. To investigate the bacterial community in the adenoid, samples were obtained from 35 children undergoing adenoidectomy for chronic OM or obstructive sleep apnea. We used a novel, culture-independent molecular diagnostic methodology, followed by confocal microscopy, to investigate the in situ distribution and organization of pathogens in the adenoids to determine whether pathogenic bacteria exhibited criteria characteristic of biofilms. The Ibis T5000 Universal Biosensor System was used to interrogate the extent of the microbial diversity within adenoid biopsy specimens. Using a suite of 16 broad-range bacterial primers, we demonstrated that adenoids from both diagnostic groups were colonized with polymicrobial biofilms. Haemophilus influenzae was present in more adenoids from the COM group (P = 0.005), but there was no significant difference between the two patient groups for Streptococcus pneumoniae or Staphylococcus aureus. Fluorescence in situ hybridization, lectin binding, and the use of antibodies specific for host epithelial cells demonstrated that pathogens were aggregated, surrounded by a carbohydrate matrix, and localized on and within the epithelial cell surface, which is consistent with criteria for bacterial biofilms. PMID:21307211

  18. Integrated reservoir characterization for unconventional reservoirs using seismic, microseismic and well log data

    Science.gov (United States)

    Maity, Debotyam

    This study is aimed at an improved understanding of unconventional reservoirs which include tight reservoirs (such as shale oil and gas plays), geothermal developments, etc. We provide a framework for improved fracture zone identification and mapping of the subsurface for a geothermal system by integrating data from different sources. The proposed ideas and methods were tested primarily on data obtained from North Brawley geothermal field and the Geysers geothermal field apart from synthetic datasets which were used to test new algorithms before actual application on the real datasets. The study has resulted in novel or improved algorithms for use at specific stages of data acquisition and analysis including improved phase detection technique for passive seismic (and teleseismic) data as well as optimization of passive seismic surveys for best possible processing results. The proposed workflow makes use of novel integration methods as a means of making best use of the available geophysical data for fracture characterization. The methodology incorporates soft computing tools such as hybrid neural networks (neuro-evolutionary algorithms) as well as geostatistical simulation techniques to improve the property estimates as well as overall characterization efficacy. The basic elements of the proposed characterization workflow involves using seismic and microseismic data to characterize structural and geomechanical features within the subsurface. We use passive seismic data to model geomechanical properties which are combined with other properties evaluated from seismic and well logs to derive both qualitative and quantitative fracture zone identifiers. The study has resulted in a broad framework highlighting a new technique for utilizing geophysical data (seismic and microseismic) for unconventional reservoir characterization. It provides an opportunity to optimally develop the resources in question by incorporating data from different sources and using their temporal

  19. Assessing the impacts of reservoir operation to floodplain inundation by combining hydrological, reservoir management, and hydrodynamic models

    Science.gov (United States)

    Mateo, Cherry May; Hanasaki, Naota; Komori, Daisuke; Tanaka, Kenji; Kiguchi, Masashi; Champathong, Adisorn; Sukhapunnaphan, Thada; Yamazaki, Dai; Oki, Taikan

    2014-09-01

    A catastrophic flood event which caused massive economic losses occurred in Thailand, in 2011. Several studies have already been conducted to analyze the Thai floods, but none of them have assessed the impacts of reservoir operation on flood inundation. This study addresses this gap by combining physically based hydrological models to explicitly simulate the impacts of reservoir operation on flooding in the Chao Phraya River Basin, Thailand. H08, an integrated water resources model with a reservoir operation module, was combined with CaMa-Flood, a river routing model with representation of flood dynamics. The combined H08-CaMa model was applied to simulate and assess the historical and alternative reservoir operation rules in the two largest reservoirs in the basin. The combined H08-CaMa model effectively simulated the 2011 flood: regulated flows at a major gauging station have high daily NSE-coefficient of 92% as compared with observed discharge; spatiotemporal extent of simulated flood inundation match well with those of satellite observations. Simulation results show that through the operation of reservoirs in 2011, flood volume was reduced by 8.6 billion m3 and both depth and area of flooding were reduced by 40% on the average. Nonetheless, simple modifications in reservoir operation proved to further reduce the flood volume by 2.4 million m3 and the depth and area of flooding by 20% on the average. By modeling reservoir operation with a hydrodynamic model, a more realistic simulation of the 2011 Thai flood was made possible, and the potential of reducing flood inundation through improved reservoir management was quantified.

  20. Maqalika Reservoir: utilisation and sustainability of Maqalika Reservoir as a source of potable water supply for Maseru in Lesotho

    CSIR Research Space (South Africa)

    Letsie, M

    2008-07-01

    Full Text Available and sustainability of Maqalika Reservoir as a source of potable water supply for Maseru in Lesotho Maqalika Reservoir By Mr Masupha Letsie and Dr Dhiren Allopi Maseru is the capital of Lesotho and is the country’s main centre for commerce and industry. The study... area is located on the north-eastern outskir ts of the Maseru urban area. The catchment occupies an area of 44km2, with a length of approximately 13km and channel slope of 0.4km/km. The Maqalika Reservoir was built in 1983 to meet the water demand...

  1. Strategies of exploitation of mammalian reservoirs by Bartonella species

    Directory of Open Access Journals (Sweden)

    Deng Hongkuan

    2012-02-01

    Full Text Available Abstract Numerous mammal species, including domestic and wild animals such as ruminants, dogs, cats and rodents, as well as humans, serve as reservoir hosts for various Bartonella species. Some of those species that exploit non-human mammals as reservoir hosts have zoonotic potential. Our understanding of interactions between bartonellae and reservoir hosts has been greatly improved by the development of animal models for infection and the use of molecular tools allowing large scale mutagenesis of Bartonella species. By reviewing and combining the results of these and other approaches we can obtain a comprehensive insight into the molecular interactions that underlie the exploitation of reservoir hosts by Bartonella species, particularly the well-studied interactions with vascular endothelial cells and erythrocytes.

  2. Strategies of exploitation of mammalian reservoirs by Bartonella species.

    Science.gov (United States)

    Deng, Hongkuan; Le Rhun, Danielle; Buffet, Jean-Philippe R; Cotté, Violaine; Read, Amanda; Birtles, Richard J; Vayssier-Taussat, Muriel

    2012-02-27

    Numerous mammal species, including domestic and wild animals such as ruminants, dogs, cats and rodents, as well as humans, serve as reservoir hosts for various Bartonella species. Some of those species that exploit non-human mammals as reservoir hosts have zoonotic potential. Our understanding of interactions between bartonellae and reservoir hosts has been greatly improved by the development of animal models for infection and the use of molecular tools allowing large scale mutagenesis of Bartonella species. By reviewing and combining the results of these and other approaches we can obtain a comprehensive insight into the molecular interactions that underlie the exploitation of reservoir hosts by Bartonella species, particularly the well-studied interactions with vascular endothelial cells and erythrocytes.

  3. Tight reservoir bag: the bag itself may be the culprit.

    Science.gov (United States)

    Umesh, Goneppanavar; Jasvinder, Kaur

    2010-06-01

    Numerous possibilities exist which may cause obstruction to ventilation under anesthesia resulting in a tight reservoir bag with low compliance. We report an interesting case where a reservoir bag twisted around its own neck and resulted in a tight bag situation. The neck portion of the reservoir bag would be hidden from the view of anesthesiologists in head and neck surgery and hence it is easier to miss early recognition of the twist. We caution all anesthesiologists using the disposable modified Jackson-Rees breathing system to be aware of such an eventuality. We also urge the manufacturer to consider strengthening the neck of the reservoir bag by improving the quality of the material used for its construction.

  4. Microbial Life in an Underground Gas Storage Reservoir

    Science.gov (United States)

    Bombach, Petra; van Almsick, Tobias; Richnow, Hans H.; Zenner, Matthias; Krüger, Martin

    2015-04-01

    While underground gas storage is technically well established for decades, the presence and activity of microorganisms in underground gas reservoirs have still hardly been explored today. Microbial life in underground gas reservoirs is controlled by moderate to high temperatures, elevated pressures, the availability of essential inorganic nutrients, and the availability of appropriate chemical energy sources. Microbial activity may affect the geochemical conditions and the gas composition in an underground reservoir by selective removal of anorganic and organic components from the stored gas and the formation water as well as by generation of metabolic products. From an economic point of view, microbial activities can lead to a loss of stored gas accompanied by a pressure decline in the reservoir, damage of technical equipment by biocorrosion, clogging processes through precipitates and biomass accumulation, and reservoir souring due to a deterioration of the gas quality. We present here results from molecular and cultivation-based methods to characterize microbial communities inhabiting a porous rock gas storage reservoir located in Southern Germany. Four reservoir water samples were obtained from three different geological horizons characterized by an ambient reservoir temperature of about 45 °C and an ambient reservoir pressure of about 92 bar at the time of sampling. A complementary water sample was taken at a water production well completed in a respective horizon but located outside the gas storage reservoir. Microbial community analysis by Illumina Sequencing of bacterial and archaeal 16S rRNA genes indicated the presence of phylogenetically diverse microbial communities of high compositional heterogeneity. In three out of four samples originating from the reservoir, the majority of bacterial sequences affiliated with members of the genera Eubacterium, Acetobacterium and Sporobacterium within Clostridiales, known for their fermenting capabilities. In

  5. Runoff Simulation of Shitoukoumen Reservoir Basin Based on SWAT Model

    Institute of Scientific and Technical Information of China (English)

    XIE; Miao; LI; Hong-yan; LIU; Tie-juan; RU; Shi-rong

    2012-01-01

    [Objective]The study aimed to simulate the runoff of Shitoukoumen Reservoir basin by using SWAT model. [Method] Based on DEM elevation, land use type, soil type and hydrometeorological data, SWAT model, a distributed hydrological model was established to simulate the monthly runoff of Shitoukoumen Reservoir basin, and the years 2006 and 2010 were chosen as the calibration and validation period respectively. [Result] The simulation results indicated that SWAT model could be used to simulate the runoff of Shitoukoumen Reservoir basin, and the simulation effect was good. However, the response of the model to local rainstorm was not obvious, so that the actual runoff in June and July of 2010 was abnormally higher than the simulation value. [Conclusion] The research could provide theoretical references for the plan and management of water resources in Shitoukoumen Reservoir basin in future.

  6. Growth of the deposit wedge in the mountain reservoir

    Science.gov (United States)

    Chen, Y.; Song, G.

    2011-12-01

    The sedimentary problem of mountain reservoirs in Taiwan is getting serious year by year.Due to eroded sediments enter downstream reservoirs,the loss of sediment transport capacity may cause deposition of sediment in reservoirs.This phenomenon make problems to small mountain reservoirs.To realize the interaction between deposit wedges and mountain reservoirs,we selected Wushe reservoir which is situated in central Taiwan for a case study. Wushe reservoir is long and narrow.In recent years,most sediment is introduced during rain events that now accompany climate change are very important in sediment supply.In this thesis,we collected data of underwater landform and sub-bottom bedding information by using high resolution Multibeam Survey System(MBS) and seismic-reflection system.Up to now,we already had the bathymetric data for more than ten years,moreover,in 2010,we used 3.5kHz sub-bottom seismic profiler to analysis the sedimentary bedding situation in this area.These methods provide us accurate reservoir topography,sediment accumulation and the major ways of sediment transportation.The study purposes are as follows: First,according to the available underwater data for last ten years,we recognize the geomorphological characters of sedimentation as well as complete the mappings.Comparing to bathymetric images each year,we evaluate the carried ways of sediment.The flow water which enters this area transports along the thalweg,which in eastern reservoir.The range of water level variation cause alteration of sedimentary morphology,it also affects the scope of alluvial fan.The alluvial fan is located in the middle of the reservoir,the edge of it had moved forward 500 meters for last ten years.The annual mean of forward velocity was 50 meters,the elevation of fan edge also accelerated 10 meters per year.In a word,the large volume of the sedimentary delta is in Wushe reservoir now. Second,trying to clarify the composition of sedimentation and explain the sub

  7. Pressure Transient Analysis of Arbitrarily Shaped Fractured Reservoirs

    Institute of Scientific and Technical Information of China (English)

    Gao Huimei; He Yingfu; Jiang Hanqiao; Chen Minfeng

    2007-01-01

    Reservoir boundary shape has a great influence on the transient pressure response of oil wells located in arbitrarily shaped reservoirs.Conventional analytical methods can only be used to calculate transient pressure response in regularly shaped reservoirs.Under the assumption that permeability varies exponentially with pressure drop,a mathematical model for well test interpretation of arbitrarily shaped deformable reservoirs was established.By using the regular perturbation method and the boundary element method,the model could be solved.The pressure behavior of wells with wellbore storage and skin effects was obtained by using the Duhamel principle.The type curves were plotted and analyzed by considering the effects of permeability modulus,arbitrary shape and impermeable region.

  8. EROSION RATE OF RESERVOIR DEPOSIT AS REVEALED BY LABORATORY EXPERIMENT

    Directory of Open Access Journals (Sweden)

    A. S. Amar

    2012-06-01

    Full Text Available The construction of dams and reservoirs in a river can give significant impacts on its flow of water and sediment, and can cause long-term morphological changes on the river. Reservoir sedimentation can reduce a reservoir’s effective flood control volume, and in some severe cases can cause overtopping during floods. Sediment deposition against a dam can reduce its stability, and affect the operation of low-level outlet works, gates, and valves. The abrasive action of sediment particles can roughen the surface of release facilities and can cause cavitations and vibration. Sedimentation can also affect a reservoir’s water quality, and reduce its flood control, water supply, hydropower, and recreation benefits. Consequently, taking sedimentation into consideration not only in the planning and design, but also in the operation and maintenance of a dam and reservoir is important. Keywords: Erosion rate, reservoir deposit, shear stress.

  9. Heavy oil reservoirs recoverable by thermal technology. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kujawa, P.

    1981-02-01

    This volume contains reservoir, production, and project data for target reservoirs thermally recoverable by steam drive which are equal to or greater than 2500 feet deep and contain heavy oil in the 8 to 25/sup 0/ API gravity range. Data were collected from three source types: hands-on (A), once-removed (B), and twice-removed (C). In all cases, data were sought depicting and characterizing individual reservoirs as opposed to data covering an entire field with more than one producing interval or reservoir. The data sources are listed at the end of each case. This volume also contains a complete listing of operators and projects, as well as a bibliography of source material.

  10. A Sand Control System for Light Oil Reservoir

    Institute of Scientific and Technical Information of China (English)

    Xiang Yuzhang

    1996-01-01

    @@ Over 30-year water flooding in light oil sandstone reservoirs with loose argillaceous cement in Karamay oilfield results in severe sand production, varying from well to well with the different date of well completion.

  11. Well test analysis for wells producing layered reservoirs with crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Prijambodo, R.; Raghavan, R.; Reynolds, A.C.

    1981-01-01

    The pressure response of a well producing a two-layer reservoir with crossflow is examined. It is shown that the flowing pressure response of a well at early times can be divided into three flow periods. The first period is one in which the reservoir behaves as if it were a stratified system (no-crossflow). This period is followed by a transitional period. During the third period, the reservoir can be described by an equivalent single-layer system. The influence of the skin regions is presented. The significance of the estimate of the skin factor obtained from a pressure test is discussed. It is shown that the nature and magnitude of the skin regions and the size of the reservoir determine the applicability of procedures that are based on single-layer systems. 17 refs.

  12. Pressure transient analysis methods for bounded naturally fractured reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C-C; Raghavan, R.; Reynolds, A.C.; Serra, K.

    1985-06-01

    New methods for analyzing drawdown and buildup pressure data obtained at a well located in an infinite, naturally fractured reservoir were presented recently. In this work, the analysis of both drawdown and buildup data in a bounded, naturally fractured reservoir is considered. For the bounded case, the authors show that five possible flow regimes may be exhibited by drawdown data. They delineate the conditions under which each of these five flow regimes exists and the information that can be obtained from each possible combination of flow regimes. Conditions under which semilog methods can be used to analyze buildup data are discussed for the bounded fractured reservoir case. New Matthews-Brons-Hazebroek (MBH) functions for computing the average reservoir pressure from buildup data are presented.

  13. Rating of new outlet structures for MacFarlane Reservoir

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Memorandum explaining the new work on the outlet structure at MacFarlane Reservoir. Flow measurements were taken at different staff gage elevations and this data is...

  14. Hantavirus immunology of rodent reservoirs: current status and future directions.

    Science.gov (United States)

    Schountz, Tony; Prescott, Joseph

    2014-03-14

    Hantaviruses are hosted by rodents, insectivores and bats. Several rodent-borne hantaviruses cause two diseases that share many features in humans, hemorrhagic fever with renal syndrome in Eurasia or hantavirus cardiopulmonary syndrome in the Americas. It is thought that the immune response plays a significant contributory role in these diseases. However, in reservoir hosts that have been closely examined, little or no pathology occurs and infection is persistent despite evidence of adaptive immune responses. Because most hantavirus reservoirs are not model organisms, it is difficult to conduct meaningful experiments that might shed light on how the viruses evade sterilizing immune responses and why immunopathology does not occur. Despite these limitations, recent advances in instrumentation and bioinformatics will have a dramatic impact on understanding reservoir host responses to hantaviruses by employing a systems biology approach to identify important pathways that mediate virus/reservoir relationships.

  15. Geomechanically Coupled Simulation of Flow in Fractured Reservoirs

    Science.gov (United States)

    Barton, C.; Moos, D.; Hartley, L.; Baxter, S.; Foulquier, L.; Holl, H.; Hogarth, R.

    2012-12-01

    Capturing the necessary and sufficient detail of reservoir hydraulics to accurately evaluate reservoir behavior remains a significant challenge to the exploitation and management of fracture-dominated geothermal reservoirs. In these low matrix permeability reservoirs, stimulation response is controlled largely by the properties of natural and induced fracture networks, which are in turn controlled by the in situ stresses, the fracture distribution and connectivity and the hydraulic behavior of the fractures. This complex interaction of fracture flow systems with the present-day stress field compounds the problem of developing an effective and efficient simulation to characterize, model and predict fractured reservoir performance. We discuss here a case study of the integration of geological, geophysical, geomechanical, and reservoir engineering data to characterize the in situ stresses, the natural fracture network and the controls on fracture permeability in geothermal reservoirs. A 3D geomechanical reservoir model includes constraints on stress magnitudes and orientations, and constraints on mechanical rock properties and the fractures themselves. Such a model is essential to understanding reservoir response to stimulation and production in low matrix permeability, fracture-dominated reservoirs. The geomechanical model for this study was developed using petrophysical, drilling, and wellbore image data along with direct well test measurements and was mapped to a 3D structural grid to facilitate coupled simulation of the fractured reservoir. Wellbore image and stimulation test data were used along with microseismic data acquired during the test to determine the reservoir fracture architecture and to provide control points for a realistic inter-connected discrete fracture network. As most fractures are stress-sensitive, their hydraulic conductivities will change with changes in bottomhole flowing and reservoir pressures, causing variations in production profiles

  16. Hailstone Reservoir Feasibility Study : Hailstone National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This study covers the water quality in the Hailstone Reservoir that has been severely impacted by up-gradient saline seeps that contain trace elements. Due to the...

  17. Crafts and gears used in reservoirs of Marathawada region, Maharashtra

    Directory of Open Access Journals (Sweden)

    S. G. Jetithor

    2013-09-01

    Full Text Available It was analyzed the fisheries arts in reservoirs of Marathawada region, Maharashtra, it was compared the different kinds of fisheries arts considering efectivity, materials, mode of use, and fisheries efforts for different sites.

  18. Water reservoir as resource of raw material for ceramic industry

    Science.gov (United States)

    Irie, M.; Tarhouni, J.

    2015-04-01

    The industries related to the ceramics such as construction bricks, pottery and tile are the important sectors that cover the large part of the working population in Tunisia. The raw materials, clay or silt are excavated from opencast site of limestone clay stratum. The opencast site give the negative impact on landscape and environment, risks of landslide, soil erosion etc. On the other hand, a most serious problem in water resource management, especially in arid land such as Tunisia, is sedimentation in reservoirs. Sediment accumulation in the reservoirs reduces the water storage capacity. The authors proposed the exploitation of the sediment as raw material for the ceramics industries in the previous studies because the sediment in Tunisia is fine silt. In this study, the potential of the water reservoirs in Tunisia as the resource of the raw material for the ceramics industries is estimated from the sedimentation ratio in the water reservoirs.

  19. Reservoir engineering studies of the Cerro Prieto geothermal field

    Science.gov (United States)

    Goyal, K. P.; Lippmann, M. J.; Tsang, C. F.

    1982-09-01

    Reservoir engineering studies of the Cerro Prieto geothermal field began in 1978 under a five-year cooperative agreement between the US Department of Energy and the Comision Federal de Electricidad de Mexico, with the ultimate objective of simulating the reservoir to forecast its production capacity, energy longevity, and recharge capability under various production and injection scenarios. During the fiscal year 1981, attempts were made to collect information on the evolution history of the field since exploitation began; the information is to be used later to validate the reservoir model. To this end, wellhead production data were analyzed for heat and mass flow and also for changes in reservoir pressures, temperatures, and saturations for the period from March 1973 to November 1980.

  20. Hydroacoustic Estimates of Fish Density Distributions in Cougar Reservoir, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Ploskey, Gene R.; Zimmerman, Shon A.; Hennen, Matthew J.; Batten, George W.; Mitchell, T. D.

    2012-09-01

    Day and night mobile hydroacoustic surveys were conducted once each month from April through December 2011 to quantify the horizontal and vertical distributions of fish throughout Cougar Reservoir, Lane County, Oregon.

  1. LBL/Industry fractured reservoir performance definition project

    Energy Technology Data Exchange (ETDEWEB)

    Benson, S.M. [Lawrence Berkeley Lab., CA (United States)

    1995-04-01

    One of the problems facing the petroleum industry is the recovery of oil from heterogeneous, fractured reservoirs and from reservoirs that have been partially depleted. In response to this need, several companies, notably British Petroleum USA, (BP) and Continental Oil Company (CONOCO), have established integrated reservoir description programs. Concurrently, LBL is actively involved in developing characterization technology for heterogeneous, fractured rock, mainly for DOE`s Civilian Nuclear Waste Program as well as Geothermal Energy programs. The technology developed for these programs was noticed by the petroleum industry and resulted in cooperative research centered on the petroleum companies test facilities. The emphasis of this work is a tightly integrated interdisciplinary approach to the problem of characterizing complex, heterogeneous earth materials. In this approach we explicitly combine the geologic, geomechanical, geophysical and hydrologic information in a unified model for predicting fluid flow. The overall objective is to derive improved integrated approaches to characterizing naturally fractured gas reservoirs.

  2. Discrete Feature Approach for Heterogeneous Reservoir Production Enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Dershowitz, William S.; Curran, Brendan; Einstein, Herbert; LaPointe, Paul; Shuttle, Dawn; Klise, Kate

    2002-07-26

    The report presents summaries of technology development for discrete feature modeling in support of the improved oil recovery (IOR) for heterogeneous reservoirs. In addition, the report describes the demonstration of these technologies at project study sites.

  3. study of ichtyofauna of daberam reservoir, katsina state 172

    African Journals Online (AJOL)

    DR. AMINU

    increasing human population in developing countries .... practices in village ponds and reservoirs also affected ... Length-weight relationship and diet ... Pauly D, and Gayanilo Jr. FC (1997). A Bee: An alternative approach to estimating the.

  4. Reservoir shore development in long range terrestrial laser scanning monitoring.

    Science.gov (United States)

    Kaczmarek, Halina

    2016-04-01

    Shore zones of reservoirs are in most cases very active, getting transformed as a result of coastal processes and mass movements initiated on the slopes surrounding the reservoir. From the point of view of the users of water reservoirs shore recession strongly undesirable as it causes destruction to infrastructure and buildings located in the immediate vicinity of the reservoir. For this reason, reservoir shores require continuous geodetic monitoring. Fast and accurate geodetic measurements covering shore sections several kilometers long, often in poorly accessible areas, are available using long range terrestrial laser scanning (TLS). The possibilities of using long range terrestrial laser scanning are shown on the example of the reservoir Jeziorsko on the Warta River (Central Poland). This reservoir, created in the years 1986-1992, is a typical retention reservoir, the annual fluctuations of which reach 5 m. Depending on the water level its surface area ranges from 42.3 to 19.6 km2. The width of the reservoir is 2.5 km. The total shore length of the reservoir, developed in Quaternary till and sand-till sediments, is 44.3 km, including 30.1 km of the unreinforced shore. Out of the unreinforced shore 27% is subject to coastal erosion. The cliff heights vary from a few cm to 12.5 meters, and the current rate of the cliff recession ranges from 0 to 1.12 m/y. The study used a terrestrial long range laser scanner Riegl VZ-4000 of a range of up to 4000 m. It enabled conducting the measurements of the cliff recession from the opposite shore of the reservoir, with an angular resolution of 0.002°, which gives about 50 measurement points per 1 m2. The measurements were carried out in the years 2014-2015, twice a year, in early spring before high water level, and in late autumn at a dropping water level. This allowed the separation of the impact of coastal processes and frost weathering on the cliff recession and their quantitative determination. The size and nature of

  5. Generalized effective medium resistivity model for low resistivity reservoir

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    With the advancement in oil exploration,producible oil and gas are being found in low resistivity reservoirs,which may otherwise be erroneously thought as water zones from their resistivity.However,the evaluation of low resistivity reservoirs remains difficult from log interpretation.Since low resistivity in hydrocarbon bearing sands can be caused by dispersed clay,laminated shale,conductive matrix grains,microscopic capillary pores and high saline water,a new resistivity model is required for more accurate hydrocarbon saturation prediction for low resistivity formations.Herein,a generalized effective medium resistivity model has been proposed for low resistivity reservoirs,based on experimental measurements on artificial low resistivity shaly sand samples,symmetrical anisotropic effective medium theory for resistivity interpretations,and geneses and conductance mechanisms of low resistivity reservoirs.By analyzing effects of some factors on the proposed model,we show theoretically the model can describe conductance mechanisms of low resistivity reservoirs with five geneses.Also,shale distribution largely affects water saturation predicted by the model.Resistivity index decreases as fraction and conductivity of laminated shale,or fraction of dispersed clay,or conductivity of rock matrix grains increases.Resistivity index decreases as matrix percolation exponent,or percolation rate of capillary bound water increases,and as percolation exponent of capillary bound water,or matrix percolation rate,or free water percolation rate decreases.Rock sample data from low resistivity reservoirs with different geneses and interpretation results for log data show that the proposed model can be applied in low resistivity reservoirs containing high salinity water,dispersed clay,microscopic capillary pores,laminated shale and conductive matrix grains,and thus is considered as a generalized resistivity model for low resistivity reservoir evaluation.

  6. Generalized effective medium resistivity model for low resistivity reservoir

    Institute of Scientific and Technical Information of China (English)

    SONG YanJie; TANG XiaoMin

    2008-01-01

    With the advancement in oil exploration, producible oil and gas are being found in low resistivity reservoirs, which may otherwise be erroneously thought as water zones from their resistivity. However,the evaluation of low resistivity reservoirs remains difficult from log interpretation. Since low resistivity in hydrocarbon bearing sands can be caused by dispersed clay, laminated shale, conductive matrix grains, microscopic capillary pores and high saline water, a new resistivity model is required for more accurate hydrocarbon saturation prediction for low resistivity formations. Herein, a generalized effective medium resistivity model has been proposed for low resistivity reservoirs, based on experimental measurements on artificial low resistivity shaly sand samples, symmetrical anisotropic effective medium theory for resistivity interpretations, and geneses and conductance mechanisms of low resistivity reservoirs. By analyzing effects of some factors on the proposed model, we show theoretically the model can describe conductance mechanisms of low resistivity reservoirs with five geneses. Also,shale distribution largely affects water saturation predicted by the model. Resistivity index decreases as fraction and conductivity of laminated shale, or fraction of dispersed clay, or conductivity of rock matrix grains increases. Resistivity index decreases as matrix percolation exponent, or percolation rate of capillary bound water increases, and as percolation exponent of capillary bound water, or matrix percolation rate, or free water percolation rate decreases. Rock sample data from low resistivity reservoirs with different geneses and interpretation results for log data show that the proposed model can be applied in low resistivity reservoirs containing high salinity water, dispersed clay, microscopic capillary pores, laminated shale and conductive matrix grains, and thus is considered as a generalized resistivity model for low resistivity reservoir evaluation.

  7. Assessment of Ilam Reservoir Eutrophication Response in Controlling Water Inflow

    Directory of Open Access Journals (Sweden)

    Fereshteh Nourmohammadi Dehbalaei

    2016-12-01

    Full Text Available In this research, a 2D laterally averaged model of hydrodynamics and water quality, CE-QUAL-W2, was applied to simulate water quality parameters in the Ilam reservoir. The water quality of Ilam reservoir was obtained between mesotrophic and eutrophic based on the measured data including chlorophyll a, total phosphorus and subsurface oxygen saturation. The CE-QUAL-W2 model was calibrated and verified by using the data of the year 2009 and 2010, respectively. Nutrients, chlorophyll a and dissolved oxygen were the water quality constituents simulated by the CE-QUAL-W2 model. The comparison of the simulated water surface elevation with the measurement records indicated that the flow was fully balanced in the numerical model. There was a good agreement between the simulated and measured results of the hydrodynamics and water quality constituents in the calibration and verification periods. Some scenarios have been made base on decreasing in water quantity and nutrient inputs of reservoir inflows. The results have shown that the water quality improvements of the Ilam reservoir will not be achieved by reducing a portion of the reservoir inflow. The retention time of water in reservoir would be changed by decreasing of inflows and it made of the negative effects on the chlorophyll-a concentration by reduction of nutrient inputs and keeping constant of discharge inflow to reservoir, the concentration of total phosphorus would be significantly changed and also the concentration of chlorophyll-a was constant approximately. Thus, the effects of control in nutrient inputs are much more than control in discharge inflows in the Ilam reservoir.

  8. Fish habitat degradation in U.S. reservoirs

    Science.gov (United States)

    Miranda, Leandro E.; Spickard, M.; Dunn, T.; Webb, K.M.; Aycock, J.N.; Hunt, K.

    2010-01-01

    As the median age of the thousands of large reservoirs (> 200 ha) in the United States tops 50, many are showing various signs of fish habitat degradation. Our goal was to identify major factors degrading fish habitat in reservoirs across the country, and to explore regional degradation patterns. An online survey including 14 metrics was scored on a 0 (no degradation) to 5 (high degradation) point scale by 221 fisheries scientists (92% response rate) to describe degradation in 482 reservoirs randomly distributed throughout the continental United States. The highest scored sources of degradation were lack of aquatic macrophytes (41% of the reservoirs scored as 4–5), lack or loss of woody debris (35% scored 4–5), mistimed water level fluctuations (34% scored 4–5), and sedimentation (31% scored 4–5). Factor analysis identified five primary degradation factors that accounted for most of the variability in the 14 degradation metrics. The factors reflected siltation, structural habitat, eutrophication, water regime, and aquatic plants. Three degradation factors were driven principally by in-reservoir processes, whereas the other two were driven by inputs from the watershed. A comparison across U.S. regions indicated significant geographical differences in degradation relative to the factors emphasized by each region. Reservoirs sometimes have been dismissed as unnatural and disruptive, but they are a product of public policy, a critical feature of landscapes, and they cannot be overlooked if managers are to effectively conserve river systems. Protection and restoration of reservoir habitats may be enhanced with a broader perspective that includes watershed management, in addition to in reservoir activities.

  9. A Novel Method for Performance Analysis of Compartmentalized Reservoirs

    Directory of Open Access Journals (Sweden)

    Shahamat Mohammad Sadeq

    2016-05-01

    Full Text Available This paper presents a simple analytical model for performance analysis of compartmentalized reservoirs producing under Constant Terminal Rate (CTR and Constant Terminal Pressure (CTP. The model is based on the well-known material balance and boundary dominated flow equations and is written in terms of capacitance and resistance of a production and a support compartment. These capacitance and resistance terms account for a combination of reservoir parameters which enable the developed model to be used for characterizing such systems. In addition to considering the properties contrast between the two reservoir compartments, the model takes into account existence of transmissibility barriers with the use of resistance terms. The model is used to analyze production performance of unconventional reservoirs, where the multistage fracturing of horizontal wells effectively creates a Stimulated Reservoir Volume (SRV with an enhanced permeability surrounded by a non-stimulated region. It can also be used for analysis of compartmentalized conventional reservoirs. The analytical solutions provide type curves through which the controlling reservoirs parameters of a compartmentalized system can be estimated. The contribution of the supporting compartment is modeled based on a boundary dominated flow assumption. The transient behaviour of the support compartment is captured by application of “distance of investigation” concept. The model shows that depletion of the production and support compartments exhibit two unit slopes on a log-log plot of pressure versus time for CTR. For CTP, however, the depletions display two exponential declines. The depletion signatures are separated by transition periods, which depend on the contribution of the support compartment (i.e. transient or boundary dominated flow. The developed equations can be implemented easily in a spreadsheet application, and are corroborated with the use of a numerical simulation. The study

  10. Recent Development in Numerical Simulation of Enhanced Geothermal Reservoirs

    Institute of Scientific and Technical Information of China (English)

    Huilin Xing; Yan Liu; Jinfang Gao; Shaojie Chen

    2015-01-01

    This paper briefly introduces the current state in computer modelling of geothermal reservoir system and then focuses on our research efforts in high performance simulation of en-hanced geothermal reservoir system. A novel supercomputer simulation tool has been developing towards simulating the highly non-linear coupled geomechanical-fluid flow-thermal systems involv-ing heterogeneously fractured geomaterials at different spatial and temporal scales. It is applied here to simulate and visualise the enhanced geothermal system (EGS), such as (1) visualisation of the microseismic events to monitor and determine where/how the underground rupture proceeds during a hydraulic stimulation, to generate the mesh using the recorded data for determining the domain of the ruptured zone and to evaluate the material parameters (i.e., the permeability) for the further numerical analysis and evaluation of the enhanced geothermal reservoir; (2) converting the avail-able fractured rock image/fracture data as well as the reservoir geological geometry to suitable meshes/grids and further simulating the fluid flow in the complicated fractures involving the de-tailed description of fracture dimension and geometry by the lattice Boltzmann method and/or finite element method;(3) interacting fault system simulation to determine the relevant complicated rup-ture process for evaluating the geological setting and the in-situ reservoir properties; (4) coupled thermo-fluid flow analysis of a geothermal reservoir system for an optimised geothermal reservoir design and management. A few of application examples are presented to show its usefulness in simu-lating the enhanced geothermal reservoir system.

  11. 1996 SPE annual technical conference and exhibition: Reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    This document contains the Proceedings of the 1996 Society of Petroleum Engineers Annual Technical Conference and Exhibition, Reservoir Engineering section. Topics covered in this section include the evaluation of reservoir engineering and resource management techniques for oil and natural gas fields, description of problems and maintenance techniques for fluid flow in oil wells and pipelines, and technology assessment of enhanced recovery techniques for increasing production from oil and gas fields.

  12. Membrane Tether Formation on a Cell Surface with Reservoir

    Institute of Scientific and Technical Information of China (English)

    JIANG Yu-Qiang; GUO Hong-Lian; LIU Chun-Xiang; LI Zhao-Lin; CHENG Bing-Ying; ZHANG Dao-Zhong; JIA Suo-Tang

    2004-01-01

    @@ We propose a mathematical model to analyse the membrane tether formation process on a cell surface with reservoir. Based on the experimental results, the membrane reservoir density of breast cancer cell was obtained,p = 8.02. The membrane surface viscosity between membrane and environment η is 0.021(pN.s/μm3), and the static force F0 = 5.71 pN.

  13. Advancing reservoir operation description in physically based hydrological models

    Science.gov (United States)

    Anghileri, Daniela; Giudici, Federico; Castelletti, Andrea; Burlando, Paolo

    2016-04-01

    Last decades have seen significant advances in our capacity of characterizing and reproducing hydrological processes within physically based models. Yet, when the human component is considered (e.g. reservoirs, water distribution systems), the associated decisions are generally modeled with very simplistic rules, which might underperform in reproducing the actual operators' behaviour on a daily or sub-daily basis. For example, reservoir operations are usually described by a target-level rule curve, which represents the level that the reservoir should track during normal operating conditions. The associated release decision is determined by the current state of the reservoir relative to the rule curve. This modeling approach can reasonably reproduce the seasonal water volume shift due to reservoir operation. Still, it cannot capture more complex decision making processes in response, e.g., to the fluctuations of energy prices and demands, the temporal unavailability of power plants or varying amount of snow accumulated in the basin. In this work, we link a physically explicit hydrological model with detailed hydropower behavioural models describing the decision making process by the dam operator. In particular, we consider two categories of behavioural models: explicit or rule-based behavioural models, where reservoir operating rules are empirically inferred from observational data, and implicit or optimization based behavioural models, where, following a normative economic approach, the decision maker is represented as a rational agent maximising a utility function. We compare these two alternate modelling approaches on the real-world water system of Lake Como catchment in the Italian Alps. The water system is characterized by the presence of 18 artificial hydropower reservoirs generating almost 13% of the Italian hydropower production. Results show to which extent the hydrological regime in the catchment is affected by different behavioural models and reservoir

  14. Heavy oil reservoirs recoverable by thermal technology. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Kujawa, P.

    1981-02-01

    The purpose of this study was to compile data on reservoirs that contain heavy oil in the 8 to 25/sup 0/ API gravity range, contain at least ten million barrels of oil currently in place, and are non-carbonate in lithology. The reservoirs within these constraints were then analyzed in light of applicable recovery technology, either steam-drive or in situ combustion, and then ranked hierarchically as candidate reservoirs. The study is presented in three volumes. Volume I presents the project background and approach, the screening analysis, ranking criteria, and listing of candidate reservoirs. The economic and environmental aspects of heavy oil recovery are included in appendices to this volume. This study provides an extensive basis for heavy oil development, but should be extended to include carbonate reservoirs and tar sands. It is imperative to look at heavy oil reservoirs and projects on an individual basis; it was discovered that operators, and industrial and government analysts will lump heavy oil reservoirs as poor producers, however, it was found that upon detailed analysis, a large number, so categorized, were producing very well. A study also should be conducted on abandoned reservoirs. To utilize heavy oil, refiners will have to add various unit operations to their processes, such as hydrotreaters and hydrodesulfurizers and will require, in most cases, a lighter blending stock. A big problem in producing heavy oil is that of regulation; specifically, it was found that the regulatory constraints are so fluid and changing that one cannot settle on a favorable recovery and production plan with enough confidence in the regulatory requirements to commit capital to the project.

  15. Geologic Characteristics of Gas Reservoirs in West Sichuan Foreland Basin

    Institute of Scientific and Technical Information of China (English)

    YANG Keming

    2008-01-01

    The foreland basin in West Sichuan is a tectonic unit that has undergone multi-periods tectonic movements of Indosinian-Yanshanian-Himalayan. Since late Triassic, it has been in a passive subsidence environment controlled by basin margin mountain systems and by the compression with abundant sediment sources. With the complex geologic setting, the main geologic characteristics of natural gas reservoir are listed as following:(1)Source rocks are coal-bearing mud and shale series with high to over maturity, and long and progressive hydrocarbon generation-displacement period. The key accumulation period is middle-late Yanshanian epoch.(2)There are three gas-bearing systems vertically, each of which has different reservoir mechanism, main-controlled factors and distribution law, so the exploration thoughts and techniques are also different.(3)Undergoing multi-period generation-migration-accumulation, oil and gas have encountered multi-period modification or destruction, and gas accumulation overpass multiple tectonic periods. So the trap type is complicated and dominated by combination traps. Because the main accumulation period of natural gas is early and the reservoir encountered the modification of strong Himalayan movement, there is great difference in the fullness degree of gas reservoirs and complicated gas-water relation. (4) Reservoir is tight to very tight, but reservoirs of relatively high quality developed under the super tight setting. (5) The key techniques for oil and gas exploration in west Sichuan foreland basin are the prediction of relatively favorable reservoirs, fractures and gas bearing; and the key techniques for oil and gas development are how to improve the penetration rate, reservoir protection and modification.

  16. Water resource management in Japan: Forest management or dam reservoirs?

    Science.gov (United States)

    Komatsu, Hikaru; Kume, Tomonori; Otsuki, Kyoichi

    2010-01-01

    Researchers and journalists in Japan recently proposed forest management as an alternative to dam reservoir development for water resource management. To examine the validity of the proposal, we compared the potential low-flow increase due to forest clearcutting with the increase due to dam reservoir development. Here, we focused on forest clearcutting as an end member among various types of forest management. We first analyzed runoff data for five catchments and found a positive correlation between annual precipitation and the low-flow increase due to deforestation. We then examined the increase in low-flow rates due to dam reservoir development (dQ(d)) using inflow and outflow data for 45 dam reservoirs across Japan. Using the relationship between annual precipitation and the low-flow increase due to deforestation, we estimated the potential increase in the low-flow rate for each dam reservoir watershed if forests in the watershed were clearcut (dQ(f)). Only 6 of the 45 samples satisfied dQ(f)>dQ(d), indicating that the potential increase in the low-flow rate due to forest clearcutting was less than the increase due to dam reservoir development in most cases. Twenty-five of the 45 samples satisfied dQ(f)<0.2 dQ(d), indicating the potential increase in the low-flow rate due to forest clearcutting was less than 20% of the increase due to dam reservoir development in more than half the cases. Therefore, forest management is far less effective for water resource management than dam reservoir development is in Japan.

  17. Oral fluoride reservoirs and the prevention of dental caries.

    Science.gov (United States)

    Vogel, Gerald Lee

    2011-01-01

    Current models for increasing the anti-caries effects of fluoride (F) agents emphasize the importance of maintaining a cariostatic concentration of F in oral fluids. The concentration of F in oral fluids is maintained by the release of this ion from bioavailable reservoirs on the teeth, oral mucosa and - most importantly, because of its association with the caries process - dental plaque. Oral F reservoirs appear to be of two types: (1) mineral reservoirs, in particular calcium fluoride or phosphate-contaminated 'calcium-fluoride-like' deposits; (2) biological reservoirs, in particular (with regard to dental plaque) F held to bacteria or bacterial fragments via calcium-fluoride bonds. The fact that all these reservoirs are mediated by calcium implies that their formation is limited by the low concentration of calcium in oral fluids. By using novel procedures which overcome this limitation, the formation of these F reservoirs after topical F application can be greatly increased. Although these increases are associated with substantive increases in salivary and plaque fluid F, and hence a potential increase in cariostatic effect, it is unclear if such changes are related to the increases in the amount of these reservoirs, or changes in the types of F deposits formed. New techniques have been developed for identifying and quantifying these deposits which should prove useful in developing agents that enhance formation of oral F reservoirs with optimum F release characteristics. Such research offers the prospect of decreasing the F content of topical agents while simultaneously increasing their cariostatic effect. Copyright © 2011 S. Karger AG, Basel.

  18. US production of natural gas from tight reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-18

    For the purposes of this report, tight gas reservoirs are defined as those that meet the Federal Energy Regulatory Commission`s (FERC) definition of tight. They are generally characterized by an average reservoir rock permeability to gas of 0.1 millidarcy or less and, absent artificial stimulation of production, by production rates that do not exceed 5 barrels of oil per day and certain specified daily volumes of gas which increase with the depth of the reservoir. All of the statistics presented in this report pertain to wells that have been classified, from 1978 through 1991, as tight according to the FERC; i.e., they are ``legally tight`` reservoirs. Additional production from ``geologically tight`` reservoirs that have not been classified tight according to the FERC rules has been excluded. This category includes all producing wells drilled into legally designated tight gas reservoirs prior to 1978 and all producing wells drilled into physically tight gas reservoirs that have not been designated legally tight. Therefore, all gas production referenced herein is eligible for the Section 29 tax credit. Although the qualification period for the credit expired at the end of 1992, wells that were spudded (began to be drilled) between 1978 and May 1988, and from November 5, 1990, through year end 1992, are eligible for the tax credit for a subsequent period of 10 years. This report updates the EIA`s tight gas production information through 1991 and considers further the history and effect on tight gas production of the Federal Government`s regulatory and tax policy actions. It also provides some high points of the geologic background needed to understand the nature and location of low-permeability reservoirs.

  19. An Online Structural Plasticity Rule for Generating Better Reservoirs

    OpenAIRE

    Roy, Subhrajit; Basu, Arindam

    2016-01-01

    In this article, a novel neuro-inspired low-resolution online unsupervised learning rule is proposed to train the reservoir or liquid of Liquid State Machine. The liquid is a sparsely interconnected huge recurrent network of spiking neurons. The proposed learning rule is inspired from structural plasticity and trains the liquid through formation and elimination of synaptic connections. Hence, the learning involves rewiring of the reservoir connections similar to structural plasticity observed...

  20. Geothermal reservoir engineering management program plan (GREMP Plan)

    Energy Technology Data Exchange (ETDEWEB)

    1977-10-01

    A plan was formulated for development of the geothermal resources of the United States. Six major elements were identified to make up the research program structure. These are: properties of materials; definition of reservoir characteristics; description of example reservoirs; modeling the behavior of geothermal systems; exploitation strategies; and economics. The six elements yield twelve research categories and fifty research projects. These are discussed in detail in Appendix A and summarized in a table. (JGB)

  1. Inverting subsidence data to detect possible compartmentalization in a gas reservoir in The Netherlands

    NARCIS (Netherlands)

    Visser, K.; Muntendam-Bos, A.G.; Kunakbayeva, G.; Leeuwenburgh, O.; Peters, E.; Fokker, P.A.

    2010-01-01

    Subsidence can be induced by hydrocarbon production, due to the decrease in pore pressure in the reservoir which causes the reservoir to compact. The subsidence at any point on the surface is a result of the compaction over a large area of the reservoir. The properties of the reservoir and thus the

  2. Evaluation of sediment management strategies on reservoir storage depletion rate: a case study

    NARCIS (Netherlands)

    Ali, M.; Sterk, G.

    2010-01-01

    Sedimentation aspects have a major role during the design of new reservoir projects because life of the reservoir mainly depends upon sediment handling during reservoir operation. Therefore, proper sediment management strategies should be adopted to enhance the life span of reservoirs. Basha Reservo

  3. OMRC Technology Effectively Develops the Massive Thick Metamorphic Buried Hill Reservoir

    Institute of Scientific and Technical Information of China (English)

    Ren Fangxiang; Zhang Fangli; Sun Yan; Gong Yaojin; Xu Ning; Zhao Zhigang

    2010-01-01

    @@ Introduction Optimized maximum reservoir contact technology(OMRC)is developed based on the maximum reservoir contact(MRC)technology,which is a kind of technology to optimize candidate multilaterals with appropriate specification based on the reservoir conditions.By applying the technology in XLT buried hill reservoir in Liaohe Oilfield satisfactory effects are obtained.

  4. The integration of geology, geophysics, petrophysics and petroleum engineering in reservoir delineation, description and management

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    This book covers the proceedings of the first Archie Conference. Topics covered include: reservoir characterization: petrophysical formation evaluation; reservoir properties prediction; origin, description and evaluation of fractured reservoirs; 2-D and 3-D in seismic reservoir delineation and development, and the utilization of geoscience and engineering technology to increase hydrocarbon recovery.

  5. Quantitative evaluation of CBM reservoir fracturing quality using logging data

    Science.gov (United States)

    Tang, Xiaoyan

    2017-03-01

    This paper presents a method for the quantitative evaluation of fracturing quality of coalbed methane (CBM) reservoirs using logging data, which will help optimize the reservoir fracturing layer. First, to make full use of logging and laboratory analysis data of coal cores, a method to determine the brittleness index of CBM reservoirs is deduced using coal industrial components. Second, this paper briefly introduces methodology to compute the horizontal principal stress difference coefficient of coal seams and the minimum horizontal principal stress difference of coal seams and roof and floor. Third, an evaluation model for the coal structure index is established using logging data, which fully considers the fracturing quality of CBM reservoirs affected by the coal structure. Fourth, the development degree of the coal reservoir is evaluated. The evaluation standard for fracturing quality of CBM reservoirs based on these five evaluation parameters is used for quantitative evaluation. The results show that the combination of methods proposed in this paper are effective. The results are consistent with the fracturing dynamic drainage. The coal seam with large brittleness index, large stress difference between the coal seam and roof and floor, small stress difference coefficient and high coal structure index has a strong fracturing quality.

  6. Using surface heave to estimate reservoir volumetric strain

    Energy Technology Data Exchange (ETDEWEB)

    Nanayakkara, A.S.; Wong, R.C.K. [Calgary Univ., AB (Canada)

    2008-07-01

    This paper presented a newly developed numerical tool for estimating reservoir volumetric strain distribution using surface vertical displacements and solving an inverse problem. Waterflooding, steam injection, carbon dioxide sequestration and aquifer storage recovery are among the subsurface injection operations that are responsible for reservoir dilations which propagate to the surrounding formations and extend to the surface resulting in surface heaves. Global positioning systems and surface tiltmeters are often used to measure the characteristics of these surface heaves and to derive valuable information regarding reservoir deformation and flow characteristics. In this study, Tikhonov regularization techniques were adopted to solve the ill-posed inversion problem commonly found in standard inversion techniques such as Gaussian elimination and least squares methods. Reservoir permeability was then estimated by inverting the volumetric strain distribution. Results of the newly developed numerical tool were compared with results from fully-coupled finite element simulation of fluid injection problems. The reservoir volumetric strain distribution was successfully estimated along with an approximate value for reservoir permeability.

  7. EVALUATION OF THE WATER TROPHIC STATE OF WAPIENICA DAM RESERVOIR

    Directory of Open Access Journals (Sweden)

    Ewa Jachniak

    2015-01-01

    Full Text Available In this publication the trophy level of Wapienica dam reservoir, based on the composition species of planktonic algae and their biomass, and concentrations of chlorophyll a, was defined. The research was conducted during the vegetative season in 2013 year; the samples were taken from two research points (W1 – the part of river Wapienica inflow to reservoir and W2 – the part of the reservoir dam by using bathometer. The whole biomass of planktonic algae and concentration of chlorophyll a from two research areas were low and it allowed to classify water of this reservoir to oligo-/ mesotrophic. Only in the part of the reservoir dam, in summer season, an increased trophy level was observed (Heinonen 1980. A similar trophic character (oligo-/ mesotrophic of the water reservoir was also indicated by algae species: Achnanthes lanceolata (Bréb. Grun. in Cl. and Grun., Chrysoccoccus minutus (Fritsch Nygaard. For a temporary increase of the trophy level, the diatom Nitzschia acicularis (Kütz. W. Sm. could indicate, because it is a typical species in poorly eutrophic water. The green algae (Pediastrum and Coelastrum, which were observed in summer season could also indicate for a rise of the trophic state, because they are typical for eutrophic water.

  8. Reservoir souring: it is all about risk mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Kuijvenhoven, Cor [Shell (Canada)

    2011-07-01

    The presence of H2S in produced fluid can be due to various sources, among which are heat/rock interaction and leaks from other reservoirs. This paper discusses the reasons, risk assessment and tools for mitigating reservoir souring. Uncontrolled microorganism activity can cause a sweet reservoir (without H2S) to become sour (production of H2S). The development of bacteria is one of the main causes of reservoir souring in unconventional gas fields. It is difficult to predict souring in seawater due to produced water re-injection (PWRI). Risk assessment and modeling techniques for reservoir souring are discussed. Some of the factors controlling H2S production include injection location, presence of scavenging minerals and biogenic souring. Mitigation methods such as biocide treatment of injection water, sulphate removal from seawater, microbial monitoring techniques such as the molecular microbiology method (MMM), and enumeration by serial dilution are explained. In summary, it can be concluded that reservoir souring is a long-term problem and should be assessed at the beginning of operations.

  9. Soybean yield in relation to distance from the Itaipu reservoir

    Science.gov (United States)

    de Faria, Rogério Teixeira; Junior, Ruy Casão; Werner, Simone Silmara; Junior, Luiz Antônio Zanão; Hoogenboom, Gerrit

    2016-07-01

    Crops close to small water bodies may exhibit changes in yield if the water mass causes significant changes in the microclimate of areas near the reservoir shoreline. The scientific literature describes this effect as occurring gradually, with higher intensity in the sites near the shoreline and decreasing intensity with distance from the reservoir. Experiments with two soybean cultivars were conducted during four crop seasons to evaluate soybean yield in relation to distance from the Itaipu reservoir and determine the effect of air temperature and water availability on soybean crop yield. Fifteen experimental sites were distributed in three transects perpendicular to the Itaipu reservoir, covering an area at approximately 10 km from the shoreline. The yield gradient between the site closest to the reservoir and the sites farther away in each transect did not show a consistent trend, but varied as a function of distance, crop season, and cultivar. This finding indicates that the Itaipu reservoir does not affect the yield of soybean plants grown within approximately 10 km from the shoreline. In addition, the variation in yield among the experimental sites was not attributed to thermal conditions because the temperature was similar within transects. However, the crop water availability was responsible for higher differences in yield among the neighboring experimental sites related to water stress caused by spatial variability in rainfall, especially during the soybean reproductive period in January and February.

  10. An upscaling procedure for fractured reservoirs with embedded grids

    Science.gov (United States)

    Fumagalli, Alessio; Pasquale, Luca; Zonca, Stefano; Micheletti, Stefano

    2016-08-01

    Upscaling of geological models for reservoir simulation is an active and important area of research. In particular, we are interested in reservoirs where the rock matrix exhibits an intricate network of fractures, which usually acts as a preferential path to the flow. Accounting for fractures' contribution in the simulation of a reservoir is of paramount importance. Here we have focused on obtaining effective parameters (e.g., transmissibility) on a 3-D computational grid on the reservoir scale, which account for the presence, at a finer spatial scale, of fractures and a network of fractures. We have essentially followed the idea illustrated in Karimi-Fard et al. (2006), yet this work has some notable aspects of innovation in the way the procedure has been implemented, and in its capability to consider rather general corner-point grids, like the ones normally used in reservoir simulations in the industry, and complex and realistic fracture networks, possibly not fully connected inside the coarse cells. In particular, novel contribution is the employment of an Embedded Discrete Fracture Model (EDFM) for computing fracture-fracture and matrix-fracture transmissibilities, with a remarkable gain in speedup. The output is in the form of transmissibility that, although obtained by considering single-phase flow, can be used for coarse-scale multiphase reservoir simulations, also via industrial software, such as Eclipse, Intersect, or GPRS. The results demonstrate the effectiveness and computational efficiency of the numerical procedure which is now ready for further testing and industrialization.

  11. Occurrence of Vibrio cholerae in water reservoirs of Burkina Faso.

    Science.gov (United States)

    Kaboré, Saidou; Cecchi, Philippe; Mosser, Thomas; Toubiana, Mylène; Traoré, Oumar; Ouattara, Aboubakar S; Traoré, Alfred S; Barro, Nicolas; Colwell, Rita R; Monfort, Patrick

    2017-09-06

    Africa is currently an important region in which cholera epidemics occur. Little is known about the presence of Vibriocholerae in freshwater bodies in Africa. There are ca. 1700 lakes and reservoirs in Burkina Faso, most of which have been built within recent decades to secure water resources. The purpose of this study was to investigate the presence of V. cholerae in the water of reservoirs, using the most-probable-number polymerase chain reaction. Results showed that V. cholerae could be detected in water samples collected from 14 of 39 sampled reservoirs. The concentrations varied from 0 MPN/l to more than 1100 MPN/l. Fifty strains of V. cholerae isolated on CHROMagar™ vibrio were identified as V. cholerae non-O1/non-O139, none of which carried the ctxA gene. A significant positive correlation was found between the presence of V. cholerae in the reservoirs and both alkaline pH and phytoplankton biomass. V. cholerae was present in significantly higher numbers in reservoirs of urban areas than in rural areas. Since V. cholerae non-O1/non-O139 has been shown to be a causative agent of endemic diarrheal outbreaks, their presence in Burkina Faso reservoirs suggests they may play a role in gastroenteritis in that country. Copyright © 2017 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

  12. Carbonate reservoir characterization. A geologic-engineering analysis. Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Chilingarian, G.V. [School of Engineering, University of Southern California, Los Angeles (United States); Mazzullo, S.J. [Geology Department, Wichita State University, Wichita (United States); Rieke, H.H. [Petroleum Engineering Department, University of Southwestern Louisiana, Lafayette (United States); Dominguez, G.C.; Samaniego, F. [eds.

    1996-12-31

    This second volume on carbonate reservoirs completes the two-volume treatise on this important topic to petroleum engineers and geologists. The two volumes form a complete and modern reference work to the properties and production behavior of carbonate petroleum reservoirs. This volume contains valuable glossaries to geologic and petroleum engineering terms providing exact definitions for writers and speakers. Professors will find a useful appendix devoted to questions and problems that can be used for teaching assignments as well as a guide for lecture development. In addition, there is a chapter devoted to core analysis of carbonate rocks which is ideal for laboratory instruction. Managers and production engineers will find a review of the latest laboratory technology for carbonate formation evaluation in the chapter on core analysis. The modern classification of carbonate rocks is presented with petroleum production performance and overall characterization using seismic and well test analyses. Separate chapters are devoted to the important naturally fractured and chalk reservoirs. Throughout the book, the emphasis is on formation evaluation and performance. The importance of carbonate reservoirs lies in the fact that they contain as much as 50% of the total petroleum reserves of the world. This is sometimes masked by the uniquely different properties and production performance characteristics of carbonate reservoirs because of their heterogeneity and the immense diversity that exists among them. This two-volume treatise brings together the wide variety of approaches to the study of carbonate reservoirs and, therefore, will fit the needs of managers, engineers, geologists and teachers. figs., tabs., refs.

  13. Hydro reservoir handling in Norway before and after deregulation

    Energy Technology Data Exchange (ETDEWEB)

    Wolfgang, Ove; Haugstad, Arne; Mo, Birger; Gjelsvik, Anders [SINTEF Energy Research, 7465 Trondheim (Norway); Wangensteen, Ivar; Doorman, Gerard [NTNU, Department of Electric Power Engineering, 7491 Trondheim (Norway)

    2009-10-15

    The Norwegian Energy Act that came into force in 1991 deregulated the electricity market and removed the former obligation power companies had to supply electricity to the geographical area they were responsible for. Hence producers can supply electricity on the basis of profitability. In 2007 the Energy Act was evaluated by the Government. As a part of this, a study concerning hydro reservoir handling before and after deregulation was carried out by SINTEF. Public statistics show that average hydro reservoir levels measured in per cent of reservoir capacity have been reduced after 1990. We have used the power-market model EMPS (EFI's Multi-area Power-market Simulator) to analyze if this reduction can be explained by natural variation in climatic variables or by structural changes that have occurred after 1990. Simulation results show that the reduced reservoir levels cannot be explained by natural variation in climatic variables. Structural changes such as increased transmission capacities can, however, explain some of the reduction. Our study does not indicate that the present reservoir handling gives reservoir levels that are too low. In this paper we also describe the stochastic dynamic optimization problem for long-term hydropower scheduling, and we explain how this problem actually is solved by the EMPS model. (author)

  14. Sampling from stochastic reservoir models constrained by production data

    Energy Technology Data Exchange (ETDEWEB)

    Hegstad, Bjoern Kaare

    1997-12-31

    When a petroleum reservoir is evaluated, it is important to forecast future production of oil and gas and to assess forecast uncertainty. This is done by defining a stochastic model for the reservoir characteristics, generating realizations from this model and applying a fluid flow simulator to the realizations. The reservoir characteristics define the geometry of the reservoir, initial saturation, petrophysical properties etc. This thesis discusses how to generate realizations constrained by production data, that is to say, the realizations should reproduce the observed production history of the petroleum reservoir within the uncertainty of these data. The topics discussed are: (1) Theoretical framework, (2) History matching, forecasting and forecasting uncertainty, (3) A three-dimensional test case, (4) Modelling transmissibility multipliers by Markov random fields, (5) Up scaling, (6) The link between model parameters, well observations and production history in a simple test case, (7) Sampling the posterior using optimization in a hierarchical model, (8) A comparison of Rejection Sampling and Metropolis-Hastings algorithm, (9) Stochastic simulation and conditioning by annealing in reservoir description, and (10) Uncertainty assessment in history matching and forecasting. 139 refs., 85 figs., 1 tab.

  15. Evolution of the Cerro Prieto reservoirs under exploitation

    Energy Technology Data Exchange (ETDEWEB)

    Truesdell, A.H.; Lippmann, M.J. [Lawrence Berkeley National Lab., CA (United States); Puente, H.G. [Comision Federal de Electricidad, Mexicali (Mexico)

    1997-07-01

    The Cerro Prieto Geothermal field of Baja California (Mexico) has been under commercial production to generate electricity since 1973. Over the years, the large amount of Geothermal fluids extracted (at present about 12,000 tons per hour) to supply steam to the power plants has resulted in a reduction of pressures, changes in reservoir processes, and increased flow of cooler groundwater into the geothermal system. The groundwater recharging the reservoir moves horizontally through permeable layers, as well as vertically through permeable fault zones. In addition, the supply of deep hot waters has continued unabated, and perhaps has increased as reservoir pressure decreased. Since 1989, this natural fluid recharge has been supplemented by injection which presently amounts to about 20% of the fluid produced. Changes in the chemical and physical characteristics of the reservoir fluids due to the drop in pressures and the inflow of cooler groundwaters and injectate have been detected on the basis of wellhead data. These changes point to reservoir processes like local boiling, phase segregation, steam condensation, mixing and dilution. Finally, the study identified areas where fluids are entering the reservoir, as well as indicated their source (i.e. natural Groundwater recharge versus injectate) and established the controlling geologic structures.

  16. Assessment of leakage from an engineered reservoir using hydrogeological tools

    Energy Technology Data Exchange (ETDEWEB)

    Smerdon, B.D.; Mendoza, C.A. [Alberta Univ., Edmonton, AB (Canada); McCann, A.; Kraushar, C. [Omni-McCann Consultants Ltd., Edmonton, AB (Canada); Nilson, A. [Alberta Infrastructure, Edmonton, AB (Canada)

    2003-07-01

    Seepage from earth-filled dams can be determined using steady-state, cross sectional, flow net analysis or transient response to fluid pressure within dam construction materials. This paper described the methods used to quantify leakage from a surface-water reservoir (Pine Coulee) located in southern Alberta. The methods included buried valley aquifer tests, three-dimensional groundwater flow simulations and stable isotope water samples. The aquifer tests were conducted when the reservoir was maintained at leaking elevation as well as when it was at non-leaking elevation. When the reservoir was leaking, the results showed a recharge boundary condition in the aquifer. When the reservoir was not leaking, a barrier boundary was present. To verify field-measured parameters and to determine the hydraulic properties and location of the leakage zone, three-dimensional groundwater flow simulations were calibrated to the datasets. Stable isotopes confirmed the seepage of reservoir water to the aquifer. Seepage rates and the required aquifer pumping rates to control aquifer water levels were predicted by the model. The results were in good agreement with field observations since relief well installation. The use of hydrogeological tools proved to be diagnostic and predictive in assessing the subsurface dynamics associated with man-made reservoirs. 15 refs., 2 tabs., 6 figs.

  17. Iron isotope systematics in planetary reservoirs

    Science.gov (United States)

    Sossi, Paolo A.; Nebel, Oliver; Foden, John

    2016-10-01

    Iron is the only polyvalent major element, and controls reduction-oxidation (redox) reactions in a host of geologic processes and reservoirs, from the mineral- to planetary-scale, on Earth and in space. Mass transfer of Fe is often accompanied by changes in bonding environment, meaning the resultant variation in bond-strength in crystals, liquids and gases induces stable isotope fractionation, even at high temperatures. In the absence of iron exchange, electron transfer can also affect iron's valence state and calculated oxygen fugacity (fO2), however its isotope composition remains unchanged. Thus, iron isotopes are a powerful tool to investigate processes that involve mass transfer, redox reactions and changes in bonding environment in planetary systems. Primitive chondritic meteorites show remarkable isotopic homogeneity, δ57 Fe = - 0.01 ± 0.01 ‰ (2SE), over a wide range of Fe/Mg vs Ni/Mg, a proxy for fO2 in the solar nebula. In chondrites, there are iron isotope differences between metal and silicates that become more pronounced at higher metamorphic grades. However, on a planetary scale, Mars and Vesta overlap with chondrites, preserving no trace of core formation or volatile depletion on these bodies. Upon assessment of pristine lherzolites, the Bulk Silicate Earth is heavier than chondrites (δ57 Fe = + 0.05 ± 0.01 ‰; 2SE), and similar to or slightly lighter than the Moon. That the mantles of some differentiated inner solar system bodies extend to heavier compositions (+ 0.2 ‰) than chondrites may principally result from volatile depletion either at a nebular or late accretion stage. Within terrestrial silicate reservoirs, iron isotopes provide insight into petrogenetic and geodynamic processes. Partial melting of the upper mantle produces basalts that are heavier than their sources, scaling with degree of melting and driving the increasingly refractory peridotite to lighter compositions. Mid-Ocean Ridge Basalts (MORBs) are homogeneous to δ57 Fe

  18. [Animal reservoirs of human virulent microsporidian species].

    Science.gov (United States)

    Słodkowicz-Kowalska, Anna

    2009-01-01

    The main objective of the present study was to determined the occurrence of Encephalitozoon intestinalis, E. hellem, E. cuniculi, and Enterocytozoon bieneusi in Poland in animal faecal using the FISH (Fluorescent In Situ Hybridization) and multiplex FISH techniques. Additional objectives included: (1) identification of animal hosts of microsporidia that are infectious to humans amongst free-ranging, captive, livestock and domestic animals; (2) a molecular analysis of randomly selected parasite isolates and determination of their zoonotic potential; (3) evaluation of the role of animals in the dissemination of microsporidia spores in the environment, and an estimation of the potential risk of infection for other animals and humans. A total of 1340 faecal samples collected from 178 species of animals were examined using conventional staining (chromotrope-2R and calcofluor white M2R staining) and molecular techniques (FISH and multiplex FISH techniques). Microsporidian spores were detected in 33 faecal samples (2.5%) obtained from 17 animal species. Microsporidia were demonstrated more often in birds (6.1%) than in mammals (0.7%); the difference was statistically significant (p Visayan warty pig (Sus cebifrons negrinus) were first found to carry E. bieneusi. The mammal species that were found to carry E. bieneusi and E. intestinalis are included in The IUCN Red List of Threatened Species. The results of the present study are significant from an epidemiological point of view. The wild, livestock and zoo animals that were found to carry microsporidia live in different conditions, and thus their role as animal reservoirs for these dangerous pathogens varies. Waterfowl birds may be the main source of contamination of surface waters with E. hellem spores and the protection of surface waters is virtually impossible. Moreover, isolates of E. hellem from mute swans have SSU rRNA sequences identical to E. hellem genotype reported 10 years ago in HIV-positive patient in USA

  19. Novel Synechococcus Genomes Reconstructed from Freshwater Reservoirs

    Directory of Open Access Journals (Sweden)

    Pedro J. Cabello-Yeves

    2017-06-01

    Full Text Available Freshwater picocyanobacteria including Synechococcus remain poorly studied at the genomic level, compared to their marine representatives. Here, using a metagenomic assembly approach we discovered two novel Synechococcus sp. genomes from two freshwater reservoirs Tous and Lake Lanier, both sharing 96% average nucleotide identity and displaying high abundance levels in these two lakes located at similar altitudes and temperate latitudes. These new genomes have the smallest estimated size (2.2 Mb and average intergenic spacer length (20 bp of any previously sequenced freshwater Synechococcus, which may contribute to their success in oligotrophic freshwater systems. Fluorescent in situ hybridization confirmed that Synechococcus sp. Tous comprises small cells (0.987 ± 0.139 μm length, 0.723 ± 0.119 μm width that amount to 90% of the picocyanobacteria in Tous. They appear together in a phylogenomic tree with Synechococcus sp. RCC307 strain, the main representative of sub-cluster 5.3 that has itself one of the smallest marine Synechococcus genomes. We detected a type II phycobilisome (PBS gene cluster in both genomes, which suggests that they belong to a phycoerythrin-rich pink low-light ecotype. The decrease of acidic proteins and the higher content of basic transporters and membrane proteins in the novel Synechococcus genomes, compared to marine representatives, support their freshwater specialization. A sulfate Cys transporter which is absent in marine but has been identified in many freshwater cyanobacteria was also detected in Synechococcus sp. Tous. The RuBisCo subunits from this microbe are phylogenetically close to the freshwater amoeba Paulinella chromatophora symbiont, hinting to a freshwater origin of the carboxysome operon of this protist. The novel genomes enlarge the known diversity of freshwater Synechococcus and improve the overall knowledge of the relationships among members of this genus at large.

  20. Geothermal reservoir categorization and stimulation study

    Energy Technology Data Exchange (ETDEWEB)

    Overton, H.L.; Hanold, R.J.

    1977-07-01

    Analyses of the fraction of geothermal wells that are dry (dry-hole fraction) indicate that geothermal reservoirs can be fitted into four basic categories: (i) Quaternary to late Tertiary sediments (almost no dry holes); (ii) Quaternary to late Tertiary extrusives (approximately 20 percent dry holes); (iii) Mesozoic or older metamorphic rocks (approximately 25-30 percent dry holes); and (iv) Precambrian or younger rocks (data limited to Roosevelt Springs where 33 percent of the wells were dry). Failure of geothermal wells to flow economically is due mainly to low-permeability formations in unfractured regions. Generally the permeability correlates inversely with the temperature-age product and directly with the original rock porosity and pore size. However, this correlation fails whenever high-stress fields provide vertical fracturing or faulting, and it is the high-stress/low-permeability category that is most amenable to artificial stimulation by hydraulic fracturing, propellant fracturing, or chemical explosive fracturing. Category (i) geothermal fields (e.g., Cerro Prieto, Mexico; Niland, CA; East Mesa, CA) are not recommended for artificial stimulation because these younger sediments almost always produce warm or hot water. Most geothermal fields fit into category (ii) (e.g., Wairakei, New Zealand; Matsukawa, Japan; Ahuachapan, El Salvador) and in the case of Mt. Home, ID, and Chandler, AZ, possess some potential for stimulation. The Geysers is a category (iii) field, and its highly stressed brittle rocks should make this site amenable to stimulation by explosive fracturing techniques. Roosevelt Springs, UT, well 9-1 is in category (iv) and is a flow failure. It represents a prime candidate for stimulation by hydraulic fracturing because it has a measured temperature of 227/sup 0/C, is cased and available for experimentation, and is within 900 m of an excellent geothermal producing well.

  1. Eleventh workshop on geothermal reservoir engineering: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R. (Stanford Geothermal Program)

    1986-01-23

    The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

  2. Energy R and D. Geothermal energy and underground reservoirs; R et D energie. Geothermie et reservoirs souterrains

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    Geothermal energy appears as a viable economic alternative among the different renewable energy sources. The French bureau of geological and mining researches (BRGM) is involved in several research and development programs in the domain of geothermal energy and underground reservoirs. This document presents the content of 5 programs: the deep hot dry rock system of Soultz-sous-Forets (construction and testing of the scientific pilot, modeling of the reservoir structure), the development of low and high enthalpy geothermal energy in the French West Indies, the comparison of the geothermal development success of Bouillante (Guadeloupe, French West Indies) with the check of the geothermal development of Nyssiros (Greece) and Pantelleria (Italy), the development of the high enthalpy geothermal potentialities of Reunion Island, and the underground storage of CO{sub 2} emissions in geologic formations (deep aquifers, geothermal reservoirs, abandoned mines or oil reservoirs). (J.S.)

  3. Main controlling factors of distribution and genetics of marine reservoirs in China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Marine reservoirs are mainly made up of clastics and carbonate reservoirs, which are distributed widely in central Tarim, Sichuan, Ordos basins from the Pre-Cambrian to Cenozoic, mainly in Palaeozoic. Marine clastic reservoirs are developed in foreshore and nearshore, tidal flat and delta environment. The sedimentary facies are important controlling factors for reservoir quality. Compaction, pressolution and cementation are factors of decreasing porosity, and low palaeo-temperature gradient, early emplacement of oil and gas and dissolution are favorable for preservation of pore. Carbonate reservoirs are divided into reef and bank, karst, dolomite and fracture reservoirs. Dolomitization, dissolution, TSR and fracture are important factors of controlling carbonate reservoirs' quality.

  4. MULTIDISCIPLINARY IMAGING OF ROCK PROPERTIES IN CARBONATE RESERVOIRS FOR FLOW-UNIT TARGETING

    Energy Technology Data Exchange (ETDEWEB)

    Stephen C. Ruppel

    2005-02-01

    Despite declining production rates, existing reservoirs in the US contain large quantities of remaining oil and gas that constitute a huge target for improved diagnosis and imaging of reservoir properties. The resource target is especially large in carbonate reservoirs, where conventional data and methodologies are normally insufficient to resolve critical scales of reservoir heterogeneity. The objectives of the research described in this report were to develop and test such methodologies for improved imaging, measurement, modeling, and prediction of reservoir properties in carbonate hydrocarbon reservoirs. The focus of the study is the Permian-age Fullerton Clear Fork reservoir of the Permian Basin of West Texas. This reservoir is an especially appropriate choice considering (a) the Permian Basin is the largest oil-bearing basin in the US, and (b) as a play, Clear Fork reservoirs have exhibited the lowest recovery efficiencies of all carbonate reservoirs in the Permian Basin.

  5. Conforming power diagrams for reservoir engineering; Diagrammes de puissance conformes pour l'ingenierie de reservoir

    Energy Technology Data Exchange (ETDEWEB)

    Flandrin, N.; Bennis, Ch. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Borouchaki, H. [Universite de Technologie de Troyes, 10 (France)

    2005-06-01

    This paper presents a new frontal approach to generate a 3D hybrid mesh in reservoir flow simulation. The mesh follows the flow directions around each well and allows to increase the accuracy in numerical simulations. In the hexahedral structured reservoir mesh, a local radial structured mesh is inserted around each well. Unstructured polyhedral meshes based on power diagrams are used to connect the structured meshes together. (authors)

  6. Relations between seismic signals and reservoir properties of tight gas reservoirs in North Germany (Permian Rotliegend sandstones)

    Energy Technology Data Exchange (ETDEWEB)

    Abram, P.; Gaupp, R. [Friedrich-Schiller-Univ., Inst. of Geosciences, Jena (Germany)

    2006-07-01

    Tight gas reservoirs in North Germany consist of sandstones of eolian, fluvial and lacustrine origin in 3,5-5 km (11500-16500 ft) depth. Different mechanical compaction, mineral authigenesis and cement dissolution resulted in proximate zones with good and poor reservoir qualities. Some regions with moderate porosities provide very low permeabilities whereas regions with low porosities can offer profitable permeabilities within comparable depositional lithologies. Therefore deep gas exploration is very dependent on predictive reservoir information from 3D seismic signals due to the locally varying reservoir qualities. A recent study succeeded in subdividing a tight gas reservoir into parts with good, moderate and poor qualities and to predict reservoir properties for parts without well information. For this purpose 3D seismic signals had been classified with Neural Network techniques based on amplitude, shape and lateral coherency of seismic traces. The unsupervised classification (Kohonen map) with a single layer of neurons generated classes, which are representative for seismic wave and rock properties at the reservoir level. The geographical distribution of these seismic facies classes correlates to locations of wells with either good or poor reservoir qualities and to zones of specific petrophysical, petrological and sedimentological data. Wells with mean permeabilities between 9-50 mD are located within the red areas (seismic classes 6 and 7), while wells with mean permeabilities below 0,5 mD are all found in blue and green areas (seismic classes 1 till 4). Furthermore, the red zone in the East corresponds to the eastern part of a production field of high transmissivity. The main reason for the strong reduction in mean permeability was found to be a specific morphotype of authigenic illite which occurs almost only in the blue and green zones. This paper outlines SOME theories and results of the doctoral thesis.

  7. Effect of flow forecasting quality on benefits of reservoir operation ? a case study for the Geheyan reservoir (China)

    OpenAIRE

    Dong, X.; Dohmen-Janssen, C. M.; de Booij, M.; Hulscher, S.

    2006-01-01

    International audience; This paper presents a methodology to determine the effect of flow forecasting quality on the benefits of reservoir operation. The benefits are calculated in terms of the electricity generated, and the quality of the flow forecasting is defined in terms of lead time and accuracy of the forecasts. In order to determine such an effect, an optimization model for reservoir operation was developed which consists of two sub-models: a long-term (monthly) and a short-term (dail...

  8. Reservoir characterization of hydraulic flow units in heavy-oil reservoirs at Petromonagas, eastern Orinoco belt, Venezuela

    Energy Technology Data Exchange (ETDEWEB)

    Merletti, G.D.; Hewitt, N.; Barrios, F.; Vega, V.; Carias, J. [BP Exploration, Houston, TX (United States); Bueno, J.C.; Lopez, L. [PDVSA Petroleos de Venezuela SA, Caracas (Venezuela, Bolivarian Republic of)

    2009-07-01

    An accurate integrated reservoir description is necessary in extra-heavy oil prospects where pore throat geometries are the ultimate control on hydrocarbon primary recovery. The key element in producing accurate oil reservoir descriptions and improving productivity is to determine relationships between core-derived pore-throat parameters and log-derived macroscopic attributes. This paper described the use of the flow zone indicator technique (FZI) to identify hydraulic units within depositional facies. It focused on a petrophysical analysis aimed at improving the description of reservoir sandstones containing heavy or extra heavy oil in the eastern Orinoco belt in Venezuela. The Petromonagas license area contains large volumes of crude oil in-place with an API gravity of 8. Production comes primarily from the lowermost stratigraphic unit of the Oficina Formation, the Miocene Morichal Member. Facies analysis has revealed various depositional settings and core measurements depict a wide range in reservoir quality within specific depositional facies. The reservoir is divided into 4 different rock qualities and 5 associated non-reservoir rocks. The use of the FZI technique provides a better understanding of the relationship between petrophysical rock types and depositional facies. 4 refs., 4 tabs., 8 figs.

  9. REVIVING ABANDONED RESERVOIRS WITH HIGH-PRESSURE AIR INJECTION: APPLICATION IN A FRACTURED AND KARSTED DOLOMITE RESERVOIR

    Energy Technology Data Exchange (ETDEWEB)

    Robert Loucks; Steve Ruppel; Julia Gale; Jon Holder; Jon Olsen; Deanna Combs; Dhiraj Dembla; Leonel Gomez

    2003-06-01

    The Bureau of Economic Geology and Goldrus Producing Company have assembled a multidisciplinary team of geoscientists and engineers to evaluate the applicability of high-pressure air injection (HPAI) in revitalizing a nearly abandoned carbonate reservoir in the Permian Basin of West Texas. The characterization phase of the project is utilizing geoscientists and petroleum engineers from the bureau of Economic Geology and the Department of Petroleum Engineering (both at The University of Texas at Austin) to define the controls on fluid flow in the reservoir as a basis for developing a reservoir model. This model will be used to define a field deployment plant that Goldrus, a small independent oil company, will implement by drilling both vertical and horizontal wells during the demonstration phase of the project. Additional reservoir data are being gathered during the demonstration phase to improve the accuracy of the reservoir model. The results of the demonstration are being closely monitored to provide a basis for improving the design of the HPAI field deployment plan. The results of the reservoir characterization field demonstration and monitoring program will be documented and widely disseminated to facilitate adoption of this technology by oil operators in the Permian Basin and elsewhere in the US.

  10. Understanding the Role of Reservoir Size on Probable Maximum Precipitation

    Science.gov (United States)

    Woldemichael, A. T.; Hossain, F.

    2011-12-01

    This study addresses the question 'Does surface area of an artificial reservoir matter in the estimation of probable maximum precipitation (PMP) for an impounded basin?' The motivation of the study was based on the notion that the stationarity assumption that is implicit in the PMP for dam design can be undermined in the post-dam era due to an enhancement of extreme precipitation patterns by an artificial reservoir. In addition, the study lays the foundation for use of regional atmospheric models as one way to perform life cycle assessment for planned or existing dams to formulate best management practices. The American River Watershed (ARW) with the Folsom dam at the confluence of the American River was selected as the study region and the Dec-Jan 1996-97 storm event was selected for the study period. The numerical atmospheric model used for the study was the Regional Atmospheric Modeling System (RAMS). First, the numerical modeling system, RAMS, was calibrated and validated with selected station and spatially interpolated precipitation data. Best combinations of parameterization schemes in RAMS were accordingly selected. Second, to mimic the standard method of PMP estimation by moisture maximization technique, relative humidity terms in the model were raised to 100% from ground up to the 500mb level. The obtained model-based maximum 72-hr precipitation values were named extreme precipitation (EP) as a distinction from the PMPs obtained by the standard methods. Third, six hypothetical reservoir size scenarios ranging from no-dam (all-dry) to the reservoir submerging half of basin were established to test the influence of reservoir size variation on EP. For the case of the ARW, our study clearly demonstrated that the assumption of stationarity that is implicit the traditional estimation of PMP can be rendered invalid to a large part due to the very presence of the artificial reservoir. Cloud tracking procedures performed on the basin also give indication of the

  11. Drought and reservoirs: intended benefits and unintended consequences

    Science.gov (United States)

    Di Baldassarre, Giuliano; AghaKouchak, Amir; Rangecroft, Sally; Wanders, Niko; Kuil, Linda; Veldkamp, Ted; van Loon, Anne

    2017-04-01

    Socioeconomic drought can be broadly defined as a condition whereby water demand cannot be satisfied by water supply. Here we posit that while reservoirs often alleviate socioeconomic drought, they can lead to unintended consequences in the medium-long term. Losses caused by socioeconomic drought tend to trigger public pressure for action, which can result in the introduction or expansion of reservoirs to store more water during high flow conditions, and release it during low flow conditions. In the short term, increasing reservoir storage is often beneficial because frequency, magnitude, and duration of drought can be significantly reduced. Yet, it is important to note that reservoirs may fail in mitigating major, prolonged drought, because reservoir storage is unavoidably limited. In the medium-long term, two main dynamics tend to emerge, which often generate unintended consequences. The first one, termed here as "supply-demand cycle", is when increasing water supply triggers additional development and thus generates higher demand, which then offsets the benefit of reservoirs as a water supply source. This is a self-reinforcing feedback, or vicious cycle, as the occurrence of a new socioeconomic drought will then likely trigger further expansion of reservoir storage to, again, increase water supply. A second dynamic, termed here as "reservoir effect" (after White's "levee effect"), is when extended periods of abundant water supply, secured by reservoirs, generate a decline of coping capacities through increased competition for water and reduced shocks to the system, which in turn increases the vulnerability of the system to socio-economic drought. In other words, while a frequent experience of water shortages can help keep high levels of preparedness, some elements of system's resilience can be lost when minor-to-moderate events are avoided. As a result, the development of reservoirs can generate a shift from frequent socioeconomic drought conditions to rare

  12. Pressure Responses of a Vertically Hydraulic Fractured Well in a Reservoir with Fractal Structure

    CERN Document Server

    Razminia, Kambiz; Torres, Delfim F M

    2015-01-01

    We obtain an analytical solution for the pressure-transient behavior of a vertically hydraulic fractured well in a heterogeneous reservoir. The heterogeneity of the reservoir is modeled by using the concept of fractal geometry. Such reservoirs are called fractal reservoirs. According to the theory of fractional calculus, a temporal fractional derivative is applied to incorporate the memory properties of the fractal reservoir. The effect of different parameters on the computed wellbore pressure is fully investigated by various synthetic examples.

  13. Quantification of Libby Reservoir Levels Needed to Maintain or Enhance Reservior Fisheries, 1984 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, Bradley B.

    1985-06-01

    We are evaluating the potential impacts of Libby Reservoir operation on the fishery in Libby Reservoir. The sampling program has been tested and modified to provide data for developing an understanding of how reservoir operation impacts the reservoir fishery. Temperature appears to be an important variable influenced by reservoir operation which regulates fish and fish food production and distribution. 39 refs., 21 figs., 19 tabs.

  14. Application of Reservoir Characterization and Advanced Technology to Improve Recovery and Economics in a Lower Quality Shallow Shelf Carbonate Reservoir, Class II

    Energy Technology Data Exchange (ETDEWEB)

    Hickman, T. Scott; Justice, James J.; Egg, Rebecca

    2001-08-07

    The Oxy operated Class 2 Project at West Welch Project is designed to demonstrate how the use of advanced technology can improve the economics of miscible CO2 injection projects in lower quality Shallow Shelf Carbonate reservoirs. The research and design phase (Budget Period 1) primarily involved advanced reservoir demonstration characterization. The current demonstration phase (Budget Period 2) is the implementation of the reservoir management plan for an optimum miscible CO2 flood design based on the reservoir characterization.

  15. Isotopic insights into microbial sulfur cycling in oil reservoirs

    Directory of Open Access Journals (Sweden)

    Christopher G Hubbard

    2014-09-01

    Full Text Available Microbial sulfate reduction in oil reservoirs (biosouring is often associated with secondary oil production where seawater containing high sulfate concentrations (~28 mM is injected into a reservoir to maintain pressure and displace oil. The sulfide generated from biosouring can cause corrosion of infrastructure, health exposure risks, and higher production costs. Isotope monitoring is a promising approach for understanding microbial sulfur cycling in reservoirs, enabling early detection of biosouring, and understanding the impact of souring. Microbial sulfate reduction is known to result in large shifts in the sulfur and oxygen isotope compositions of the residual sulfate, which can be distinguished from other processes that may be occurring in oil reservoirs, such as precipitation of sulfate and sulfide minerals. Key to the success of this method is using the appropriate isotopic fractionation factors for the conditions and processes being monitored. For a set of batch incubation experiments using a mixed microbial culture with crude oil as the electron donor, we measured a sulfur fractionation factor for sulfate reduction of -30‰. We have incorporated this result into a simplified 1D reservoir reactive transport model to highlight how isotopes can help discriminate between biotic and abiotic processes affecting sulfate and sulfide concentrations. Modeling results suggest that monitoring sulfate isotopes can provide an early indication of souring for reservoirs with reactive iron minerals that can remove the produced sulfide, especially when sulfate reduction occurs in the mixing zone between formation waters containing elevated concentrations of volatile fatty acids and injection water containing elevated sulfate. In addition, we examine the role of reservoir thermal, geochemical, hydrological, operational and microbiological conditions in determining microbial souring dynamics and hence the anticipated isotopic signatures.

  16. Appalachian Basin Low-Permeability Sandstone Reservoir Characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Ray Boswell; Susan Pool; Skip Pratt; David Matchen

    1993-04-30

    A preliminary assessment of Appalachian basin natural gas reservoirs designated as 'tight sands' by the Federal Energy Regulatory Commission (FERC) suggests that greater than 90% of the 'tight sand' resource occurs within two groups of genetically-related units; (1) the Lower Silurian Medina interval, and (2) the Upper Devonian-Lower Mississippian Acadian clastic wedge. These intervals were targeted for detailed study with the goal of producing geologic reservoir characterization data sets compatible with the Tight Gas Analysis System (TGAS: ICF Resources, Inc.) reservoir simulator. The first phase of the study, completed in September, 1991, addressed the Medina reservoirs. The second phase, concerned with the Acadian clastic wedge, was completed in October, 1992. This report is a combined and updated version of the reports submitted in association with those efforts. The Medina interval consists of numerous interfingering fluvial/deltaic sandstones that produce oil and natural gas along an arcuate belt that stretches from eastern Kentucky to western New York. Geophysical well logs from 433 wells were examined in order to determine the geologic characteristics of six separate reservoir-bearing intervals. The Acadian clastic wedge is a thick, highly-lenticular package of interfingering fluvial-deltaic sandstones, siltstones, and shales. Geologic analyses of more than 800 wells resulted in a geologic/engineering characterization of seven separate stratigraphic intervals. For both study areas, well log and other data were analyzed to determine regional reservoir distribution, reservoir thickness, lithology, porosity, water saturation, pressure and temperature. These data were mapped, evaluated, and compiled into various TGAS data sets that reflect estimates of original gas-in-place, remaining reserves, and 'tight' reserves. The maps and data produced represent the first basin-wide geologic characterization for either interval. This report

  17. Synergizing Crosswell Seismic and Electromagnetic Techniques for Enhancing Reservoir Characterization

    KAUST Repository

    Katterbauer, Klemens

    2015-11-18

    Increasing complexity of hydrocarbon projects and the request for higher recovery rates have driven the oil-and-gas industry to look for a more-detailed understanding of the subsurface formation to optimize recovery of oil and profitability. Despite the significant successes of geophysical techniques in determining changes within the reservoir, the benefits from individually mapping the information are limited. Although seismic techniques have been the main approach for imaging the subsurface, the weak density contrast between water and oil has made electromagnetic (EM) technology an attractive complement to improve fluid distinction, especially for high-saline water. This crosswell technology assumes greater importance for obtaining higher-resolution images of the interwell regions to more accurately characterize the reservoir and track fluid-front developments. In this study, an ensemble-Kalman-based history-matching framework is proposed for directly incorporating crosswell time-lapse seismic and EM data into the history-matching process. The direct incorporation of the time-lapse seismic and EM data into the history-matching process exploits the complementarity of these data to enhance subsurface characterization, to incorporate interwell information, and to avoid biases that may be incurred from separate inversions of the geophysical data for attributes. An extensive analysis with 2D and realistic 3D reservoirs illustrates the robustness and enhanced forecastability of critical reservoir variables. The 2D reservoir provides a better understanding of the connection between fluid discrimination and enhanced history matches, and the 3D reservoir demonstrates its applicability to a realistic reservoir. History-matching enhancements (in terms of reduction in the history-matching error) when incorporating both seismic and EM data averaged approximately 50% for the 2D case, and approximately 30% for the 3D case, and permeability estimates were approximately 25

  18. Global streamflows Part 2: Reservoir storage yield performance

    Science.gov (United States)

    McMahon, Thomas A.; Vogel, Richard M.; Pegram, Geoffrey G. S.; Peel, Murray C.; Etkin, Derek

    2007-12-01

    SummaryThis is the second of three papers describing hydrologic analyses of monthly and annual streamflow data for a global set of 729 unregulated rivers with at least 25 years of continuous data. Capacity estimates of hypothetical reservoirs are computed for each river using the Sequent Peak Algorithm (SPA), Behaviour analysis and the Gould-Dincer Gamma procedure. Based on SPA and Behaviour procedures, empirical relationships relating reservoir capacity and yield were developed which accounted for 87-96% of the variance in capacity estimates across the global data set of monthly streamflows. The theoretical Gould-Dincer Gamma procedure was also shown to be a suitable technique to estimate reservoir capacity-yield relationships. It is noted that the three procedures are based on different definitions of supply reliability. Continental variations of the estimated capacities under equivalent conditions are examined. Reservoir performance measures - reliability, resilience and dimensionless vulnerability - are computed and their continental variations described. As a result of these analyses a number of differences are noted about the performance of reservoirs across continental regions. For example, the median continental reservoir capacity as a ratio of the mean annual flow varied by a factor of 9 across the continental regions. Furthermore, based on the reliability metric as an example of reservoir performance, high reliabilities occur in the South Pacific and Europe, slightly less reliable systems in North and South America, lower still in northern Africa, followed by Australia and the lowest value in southern Africa. This distribution follows inversely with the coefficient of variation of annual streamflow between continents.

  19. The Stimulation of Hydrocarbon Reservoirs with Subsurface Nuclear Explosions

    Energy Technology Data Exchange (ETDEWEB)

    LORENZ,JOHN C.

    2000-12-08

    Between 1965 and 1979 there were five documented and one or more inferred attempts to stimulate the production from hydrocarbon reservoirs by detonating nuclear devices in reservoir strata. Of the five documented tests, three were carried out by the US in low-permeability, natural-gas bearing, sandstone-shale formations, and two were done in the USSR within oil-bearing carbonates. The objectives of the US stimulation efforts were to increase porosity and permeability in a reservoir around a specific well by creating a chimney of rock rubble with fractures extending beyond it, and to connect superimposed reservoir layers. In the USSR, the intent was to extensively fracture an existing reservoir in the more general vicinity of producing wells, again increasing overall permeability and porosity. In both countries, the ultimate goals were to increase production rates and ultimate recovery from the reservoirs. Subsurface explosive devices ranging from 2.3 to about 100 kilotons were used at depths ranging from 1208 m (3963 ft) to 2568 m (8427 ft). Post-shot problems were encountered, including smaller-than-calculated fracture zones, formation damage, radioactivity of the product, and dilution of the BTU value of tie natural gas with inflammable gases created by the explosion. Reports also suggest that production-enhancement factors from these tests fell short of expectations. Ultimately, the enhanced-production benefits of the tests were insufficient to support continuation of the pro-grams within increasingly adversarial political, economic, and social climates, and attempts to stimulate hydrocarbon reservoirs with nuclear devices have been terminated in both countries.

  20. Crude-oil biodegradation via methanogenesis in subsurface petroleum reservoirs.

    Science.gov (United States)

    Jones, D M; Head, I M; Gray, N D; Adams, J J; Rowan, A K; Aitken, C M; Bennett, B; Huang, H; Brown, A; Bowler, B F J; Oldenburg, T; Erdmann, M; Larter, S R

    2008-01-10

    Biodegradation of crude oil in subsurface petroleum reservoirs has adversely affected the majority of the world's oil, making recovery and refining of that oil more costly. The prevalent occurrence of biodegradation in shallow subsurface petroleum reservoirs has been attributed to aerobic bacterial hydrocarbon degradation stimulated by surface recharge of oxygen-bearing meteoric waters. This hypothesis is empirically supported by the likelihood of encountering biodegraded oils at higher levels of degradation in reservoirs near the surface. More recent findings, however, suggest that anaerobic degradation processes dominate subsurface sedimentary environments, despite slow reaction kinetics and uncertainty as to the actual degradation pathways occurring in oil reservoirs. Here we use laboratory experiments in microcosms monitoring the hydrocarbon composition of degraded oils and generated gases, together with the carbon isotopic compositions of gas and oil samples taken at wellheads and a Rayleigh isotope fractionation box model, to elucidate the probable mechanisms of hydrocarbon degradation in reservoirs. We find that crude-oil hydrocarbon degradation under methanogenic conditions in the laboratory mimics the characteristic sequential removal of compound classes seen in reservoir-degraded petroleum. The initial preferential removal of n-alkanes generates close to stoichiometric amounts of methane, principally by hydrogenotrophic methanogenesis. Our data imply a common methanogenic biodegradation mechanism in subsurface degraded oil reservoirs, resulting in consistent patterns of hydrocarbon alteration, and the common association of dry gas with severely degraded oils observed worldwide. Energy recovery from oilfields in the form of methane, based on accelerating natural methanogenic biodegradation, may offer a route to economic production of difficult-to-recover energy from oilfields.