WorldWideScience

Sample records for m3 gas strains

  1. Anomalous Hall hysteresis in T m3F e5O12/Pt with strain-induced perpendicular magnetic anisotropy

    Science.gov (United States)

    Tang, Chi; Sellappan, Pathikumar; Liu, Yawen; Xu, Yadong; Garay, Javier E.; Shi, Jing

    2016-10-01

    We demonstrate robust interface strain-induced perpendicular magnetic anisotropy in atomically flat ferrimagnetic insulator T m3F e5O12 (TIG) films grown with pulsed laser deposition on a substituted G d3G a5O12 substrate which maximizes the tensile strain at the interface. In bilayers consisting of Pt and TIG, we observe large squared Hall hysteresis loops over a wide range of thicknesses of Pt at room temperature. When a thin Cu layer is inserted between Pt and TIG, the Hall hysteresis magnitude decays but stays finite as the thickness of Cu increases up to 5 nm. However, if the Cu layer is placed atop Pt instead, the Hall hysteresis magnitude is consistently larger than when the Cu layer with the same thickness is inserted in between for all Cu thicknesses. These results suggest that both the proximity-induced ferromagnetism and spin current contribute to the anomalous Hall effect.

  2. Virulence of two Streptococcus pyogenes strains (types M1 and M3) associated with toxic-shock-like syndrome depends on an intact mry-like gene.

    OpenAIRE

    Perez-Casal, J F; Dillon, H F; Husmann, L K; Graham, B.; Scott, J R

    1993-01-01

    The major virulence factor of Streptococcus pyogenes, the M protein, is positively regulated at the transcriptional level by mry in the M type 6 strain studied. We show here that in two S. pyogenes strains isolated from cases of toxic-shock-like syndrome, a type M1 strain and a type M3 strain, an mry-like gene is also required for resistance to phagocytosis.

  3. Towards a liquid Argon TPC without evacuation filling of a 6$m^3$ vessel with argon gas from air to ppm impurities concentration through flushing

    CERN Document Server

    Curioni, A; Gendotti, A; Knecht, L; Lussi, D; Marchionni, A; Natterer, G; Resnati, F; Rubbia, A; Coleman, J; Lewis, M; Mavrokoridis, K; McCormick, K; Touramanis, C

    2010-01-01

    In this paper we present a successful experimental test of filling a volume of 6 $m^3$ with argon gas, starting from normal ambient air and reducing the impurities content down to few parts per million (ppm) oxygen equivalent. This level of contamination was directly monitored measuring the slow component of the scintillation light of the Ar gas, which is sensitive to $all$ sources of impurities affecting directly the argon scintillation.

  4. 8×104m3威金斯转炉煤气柜密封膜破损修复处理%Renovation the Broken Sealing Membrane of 8×104m3 Wiggins Converter Gas Tank

    Institute of Scientific and Technical Information of China (English)

    王树奇; 张军; 刘芳荣

    2013-01-01

    文章介绍了8× 104m3威金斯转炉煤气柜发生密封膜破损泄漏事故,分析了密封膜损坏的原因分析.希望通过此次事故,能提高运行人员和点检人员对八万转炉煤气柜的高度认识和密切关注,在以后的工作当中,避免此类事情的发生.

  5. Identification of an Acetochlor-degrading Strain M-3 and the Preliminary Metabolic Pathway%一株乙草胺降解菌株M-3的分离鉴定及其代谢途径的初步研究

    Institute of Scientific and Technical Information of China (English)

    金雷; 郭远明; 陈雪昌; 鲍静姣; 宋凯

    2013-01-01

    乙草胺是一种广谱、高效的酰胺类除草剂,由于乙草胺具有较长的降解周期,还有不易挥发、不易光解、易残留的特点,如果过量、频繁使用,对人、动植物均有一定的毒害作用.为了探讨乙草胺的微生物降解机理,本研究从长期受乙草胺污染的土壤中分离到一株能降解乙草胺的菌株M-3,该菌株能以乙草胺为唯一碳源生长.通过菌落表型、生理生化特征和菌株16S rRNA基因序列的相似性分析,将其鉴定为寡养单胞菌属(Stenotrophomonas sp.).在室内条件下,运用HPLC和HPLC-MS分析方法,研究了菌株M-3对乙草胺的降解特性,并对其代谢途径做了初步的研究.结果表明,菌株M-3在5d内对浓度为50 mg/L的乙草胺的降解率可达76.6%.M-3降解乙草胺的最适温度和最适pH值分别为30C和7.0.在对代谢产物结果进行分析的基础上推测了M-3降解乙草胺的途径,将产物鉴定为2-乙基-6-甲基-2-氯乙酰苯胺.该研究为乙草胺污染的生物修复提供了理论依据.%Acetochlor is a broad-spectrum and high-efficive chloroacetanilide herbicide.Because of its long degradation period,with the characteristics of difficult for volatilization,photolysis,and easy for residue,the overuse of acetochlor is toxic to human,plants and animals.In order to investigate the microbial degradation mechanisms of acetochlor,an acetochlor-degrading bacterium,named strain M-3 was isolated from acetochlor-contaminated samples using selective culture medium with acetochlor as the sole carbon source.The sWain was identified based on its morphological,physiological and biochemical tests,with reference to Bergey's Manual of Determinative Bacteriology combined with 16S rRNA gene sequence analysis.SWain M-3 was finally identified as Stenotrophomonas sp..With HPLC and HPLC-MS method,degrading characteristics of strain M-3 were studied under laboratory conditions and the degrading pathway of acetochlor was researched

  6. High temperature strain gage technology for gas turbine engines

    Science.gov (United States)

    Fichtel, Edward J.; McDaniel, Amos D.

    1994-08-01

    This report summarizes the results of a six month study that addressed specific issues to transfer the Pd-13Cr static strain sensor to a gas turbine engine environment. The application issues that were addressed include: (1) evaluation of a miniature, variable potentiometer for use as the ballast resistor, in conjunction with a conventional strain gage signal conditioning unit; (2) evaluation of a metal sheathed, platinum conductor leadwire assembly for use with the three-wire sensor; and (3) subjecting the sensor to dynamic strain cyclic testing to determine fatigue characteristics. Results indicate a useful static strain gage system at all temperature levels up to 1350 F. The fatigue characteristics also appear to be very promising, indicating a potential use in dynamic strain measurement applications. The procedure, set-up, and data for all tests are presented in this report. This report also discusses the specific strain gage installation technique for the Pd-13Cr gage because of its potential impact on the quality of the output data.

  7. The glucose RQ-feedback control leading to improved erythromycin production by a recombinant strain Saccharopolyspora erythraea ZL1004 and its scale-up to 372-m(3) fermenter.

    Science.gov (United States)

    Chen, Yong; Wang, Zejiang; Chu, Ju; Xi, Beili; Zhuang, Yingping

    2015-01-01

    In this paper, glucose respiratory quotient (RQ)-feedback control was developed for erythromycin production with a recombinant strain Saccharopolyspora erythraea ZL1004. RQ was confirmed to be an ideal online parameter for regulating glucose feed rate. Through feeding glucose to control RQ at 0.85 during 45-100 h and 0.95 during 100-185 h, erythromycin titer and erythromycin A concentration were reached 11.88 and 8.82 g l(-1) in 50 l fermenter, which were increased by 8.3 and 6.1 % as compared to that with glucose pH-feedback control, respectively. When glucose RQ-feedback control was scaled up to 372-m(3) fermenter, erythromycin titer and erythromycin A concentration at 155 h were reached 9.12 and 7.12 g l(-1), respectively, which were 10.5 and 9.4 % higher than that with the original technology (glucose pH-feedback control). To the best of our knowledge, this is the first report on the successful application of glucose RQ-feedback control in erythromycin production, especially in 372-m(3) fermenter.

  8. Application of 2 × 104m3 New Rubber Membrane (Wiggins) Dry Gas Tank in Refinery%2×104m3新橡胶膜型(威金斯)干式气柜在炼油厂的应用

    Institute of Scientific and Technical Information of China (English)

    张建涛

    2012-01-01

    中国石油广西石化分公司储运燃料气回收系统共设置高压、低压两座2×104m3新橡胶膜型(威金斯)干式气柜,用于全厂燃料气的再回收利用储存.本文主要从气柜结构、工作原理做了简要介绍,针对广西石化公司全厂燃料气组成特点总结了2× 104m3新橡胶膜型(威金斯)干式气柜的应用效果与技术特点与应用效果.

  9. Formando planetas habitables en estrellas M3

    Science.gov (United States)

    Dugaro, A.; de Elía, G. C.; Brunini, A.

    2016-08-01

    Studies of stellar evolution allow us to infer that the low-mass stars are the most abundant in the galaxy. In the present investigation, we analyze the formation of planetary systems without gas giants around M3-type stars, which have a mass of 0.29 M. In particular, we are interested in studying the terrestrial-like planet formation processes and water delivery in the Habitable Zone (HZ) of those systems. To develop this investigation, we assume massive protoplanetary disks for such stars, which have 5 of the mass of the central star. Once defined the working disk, we use a semi-analytical model, which is able to determine the distribution of planetary embryos and planetesimals at the end of the gaseous phase. Then, these distributions are used as initial conditions for running -body simulations. Due to the stochastic nature of the accretion process, we carry out ten -body simulations in order to analyze the evolution of the planetary systems after the gas dissipation. Our results suggest the efficient formation of terrestrial-like planets in the HZ with a wide range of masses and water contents. The planets formed in the HZ of the system have masses between 0.07 M and 0.15 M and final water contents between 5.4 and 29 by mass. The physical properties of the terrestrial-like planets formed in the HZ of our simulations suggest that they should be able to retain a permanent and substantial atmosphere.

  10. Numerical simulation of gas-dynamic, thermal processes and evaluation of the stress-strain state in the modeling compressor of the gas-distributing unit

    Science.gov (United States)

    Shmakov, A. F.; Modorskii, V. Ya.

    2016-10-01

    This paper presents the results of numerical modeling of gas-dynamic processes occurring in the flow path, thermal analysis and evaluation of the stress-strain state of a three-stage design of the compressor gas pumping unit. Physical and mathematical models of the processes developed. Numerical simulation was carried out in the engineering software ANSYS 13. The problem is solved in a coupled statement, in which the results of the gas-dynamic calculation transferred as boundary conditions for the evaluation of the thermal and stress-strain state of a three-stage design of the compressor gas pumping unit. The basic parameters, which affect the stress-strain state of the housing and changing gaps of labyrinth seals in construction. The method of analysis of the pumped gas flow influence on the strain of construction was developed.

  11. Antagonistic effect of Lactobacillus strains against gas-producing coliforms isolated from colicky infants

    Directory of Open Access Journals (Sweden)

    Oggero Roberto

    2011-06-01

    Full Text Available Abstract Background Infantile colic is a common disturb within the first 3 months of life, nevertheless the pathogenesis is incompletely understood and treatment remains an open issue. Intestinal gas production is thought to be one of the causes of abdominal discomfort in infants suffering from colic. However, data about the role of the amount of gas produced by infants' colonic microbiota and the correlation with the onset of colic symptoms are scanty. The benefit of supplementation with lactobacilli been recently reported but the mechanisms by which they exert their effects have not yet been fully defined. This study was performed to evaluate the interaction between Lactobacillus spp. strains and gas-forming coliforms isolated from stools of colicky infants. Results Strains of coliforms were isolated from stools of 45 colicky and 42 control breastfed infants in McConkey Agar and identified using PCR with species-specific primers, and the BBL™ Enterotube™ II system for Enterobacteriaceae. Gas-forming capability of coliforms was assessed in liquid cultures containing lactose as sole carbon source. The average count of total coliforms in colicky infants was significantly higher than controls: 5.98 (2.00-8.76 log10 vs 3.90 (2.50-7.10 CFU/g of faeces (p = 0.015. The following strains were identified: Escherichia coli, Klebsiella pneumoniae, Klebsiella oxytoca, Enterobacter aerogenes, Enterobacter cloacae and Enterococcus faecalis. Then, 27 Lactobacillus strains were tested for their antagonistic effect against coliforms both by halo-forming method and in liquid co-cultures. Lactobacillus delbrueckii subsp.delbrueckii DSM 20074 and L. plantarum MB 456 were able to inhibit all coliforms strains (halo-forming method, also in liquid co-cultures, thus demonstrating an antagonistic activity. Conclusions This study shows that two out of 27 strains of Lactobacillus examined possess an antimicrobial effect against six species of gas-forming coliforms

  12. Gas exchange in the filamentous cyanobacterium Nostoc punctiforme strain ATCC 29133 and Its hydrogenase-deficient mutant strain NHM5.

    Science.gov (United States)

    Lindberg, Pia; Lindblad, Peter; Cournac, Laurent

    2004-04-01

    Nostoc punctiforme ATCC 29133 is a nitrogen-fixing, heterocystous cyanobacterium of symbiotic origin. During nitrogen fixation, it produces molecular hydrogen (H(2)), which is recaptured by an uptake hydrogenase. Gas exchange in cultures of N. punctiforme ATCC 29133 and its hydrogenase-free mutant strain NHM5 was studied. Exchange of O(2), CO(2), N(2), and H(2) was followed simultaneously with a mass spectrometer in cultures grown under nitrogen-fixing conditions. Isotopic tracing was used to separate evolution and uptake of CO(2) and O(2). The amount of H(2) produced per molecule of N(2) fixed was found to vary with light conditions, high light giving a greater increase in H(2) production than N(2) fixation. The ratio under low light and high light was approximately 1.4 and 6.1 molecules of H(2) produced per molecule of N(2) fixed, respectively. Incubation under high light for a longer time, until the culture was depleted of CO(2), caused a decrease in the nitrogen fixation rate. At the same time, hydrogen production in the hydrogenase-deficient strain was increased from an initial rate of approximately 6 micro mol (mg of chlorophyll a)(-1) h(-1) to 9 micro mol (mg of chlorophyll a)(-1) h(-1) after about 50 min. A light-stimulated hydrogen-deuterium exchange activity stemming from the nitrogenase was observed in the two strains. The present findings are important for understanding this nitrogenase-based system, aiming at photobiological hydrogen production, as we have identified the conditions under which the energy flow through the nitrogenase can be directed towards hydrogen production rather than nitrogen fixation.

  13. Characterization of zeolite-trench-embedded microcantilevers with CMOS strain gauge for integrated gas sensor applications

    Science.gov (United States)

    Inoue, Shu; Denoual, Matthieu; Awala, Hussein; Grand, Julien; Mintova, Sveltana; Tixier-Mita, Agnès; Mita, Yoshio

    2016-04-01

    Custom-synthesized zeolite is coated and fixed into microcantilevers with microtrenches of 1 to 5 µm width. Zeolite is a porous material that absorbs chemical substances; thus, it is expected to work as a sensitive chemical-sensing head. The total mass increases with gas absorption, and the cantilever resonance frequency decreases accordingly. In this paper, a thick zeolite cantilever sensor array system for high sensitivity and selectivity is proposed. The system is composed of an array of microcantilevers with silicon deep trenches. The cantilevers are integrated with CMOS-made polysilicon strain gauges for frequency response electrical measurement. The post-process fabrication of such an integrated array out of a foundry-made CMOS chip is successful. On the cantilevers, three types of custom zeolite (FAU-X, LTL, and MFI) are integrated by dip and heating methods. The preliminary measurement has shown a clear shift of resonance frequency by the chemical absorbance of ethanol gas.

  14. Residual stress in a M3:2 PM high speed steel; effect of mechanical loading

    DEFF Research Database (Denmark)

    Højerslev, Christian; Odén, Magnus; Carstensen, Jesper V.;

    2001-01-01

    X-ray lattice strains were investigated in an AISI M3:2 PM high-speed steel in the as heat treated condition and after exposure to alternating mechanical load. The volume changes during heat treatment were monitored with dilatometry. Hardened and tempered AISI M3:2 steel consists of tempered lath...

  15. Hydraulic supports for polishing TMT M3MP

    Science.gov (United States)

    Hu, Haifei; Qi, Erhui; Cole, Glen; Hu, Haixiang; Luo, Xiao; Ford, Virginia; Zhang, Xuejun

    2016-10-01

    For polishing the ultra-thin TMT M3MP, a polishing support system with 18 hydraulic supports (HS) is introduced. This work focuses on the designing and testing of these HSs. Firstly the design concept of HS system is discussed; then mechanical implementation of the HS structure is carried out, with special consideration of fluid cycling, work pressurization and the weight component. Afterward the piping installation and the de-gas process for the working fluid are implemented. Pressurization and stiffness are well checked before system integration for the single HS unit. Finally the support system is integrated for the polishing process.

  16. The Luminosity Function of M3

    CERN Document Server

    Rood, R T; Paltrinieri, B; Ferraro, F R; Pecci, F F; Dorman, B; Chieffi, A; Straniero, O; Buonanno, R

    1999-01-01

    We present a high precision, large sample luminosity function (LF) for the Galactic globular cluster M3. With a combination of ground based and Hubble Space Telescope data we cover the entire radial extent of the cluster. The observed LF is well fit by canonical standard stellar models from the red giant branch (RGB) tip to below the main sequence turnoff point. Specifically, neither the RGB LF-bump nor subgiant branch LF indicate any breakdown in the standard models. On the main sequence we find evidence for a flat initial mass function and for mass segregation due to the dynamical evolution of the cluster.

  17. How posttranslational modification of nitrogenase is circumvented in Rhodopseudomonas palustris strains that produce hydrogen gas constitutively.

    Science.gov (United States)

    Heiniger, Erin K; Oda, Yasuhiro; Samanta, Sudip K; Harwood, Caroline S

    2012-02-01

    Nitrogenase catalyzes the conversion of dinitrogen gas (N(2)) and protons to ammonia and hydrogen gas (H(2)). This is a catalytically difficult reaction that requires large amounts of ATP and reducing power. Thus, nitrogenase is not normally expressed or active in bacteria grown with a readily utilized nitrogen source like ammonium. nifA* mutants of the purple nonsulfur phototrophic bacterium Rhodopseudomonas palustris have been described that express nitrogenase genes constitutively and produce H(2) when grown with ammonium as a nitrogen source. This raised the regulatory paradox of why these mutants are apparently resistant to a known posttranslational modification system that should switch off the activity of nitrogenase. Microarray, mutation analysis, and gene expression studies showed that posttranslational regulation of nitrogenase activity in R. palustris depends on two proteins: DraT2, an ADP-ribosyltransferase, and GlnK2, an NtrC-regulated P(II) protein. GlnK2 was not well expressed in ammonium-grown NifA* cells and thus not available to activate the DraT2 nitrogenase modification enzyme. In addition, the NifA* strain had elevated nitrogenase activity due to overexpression of the nif genes, and this increased amount of expression overwhelmed a basal level of activity of DraT2 in ammonium-grown cells. Thus, insufficient levels of both GlnK2 and DraT2 allow H(2) production by an nifA* mutant grown with ammonium. Inactivation of the nitrogenase posttranslational modification system by mutation of draT2 resulted in increased H(2) production by ammonium-grown NifA* cells.

  18. The Relationship Between Crack-Tip Strain and Subcritical Cracking Thresholds for Steels in High-Pressure Hydrogen Gas

    Science.gov (United States)

    Nibur, Kevin A.; Somerday, Brian P.; Marchi, Chris San; Foulk, James W.; Dadfarnia, Mohsen; Sofronis, Petros

    2013-01-01

    Threshold stress intensity factors were measured in high-pressure hydrogen gas for a variety of low alloy ferritic steels using both constant crack opening displacement and rising crack opening displacement procedures. Thresholds for crack extension under rising displacement, K THi, for crack extension under constant displacement, K_{{THi}}^{*} , and for crack arrest under constant displacement K THa, were identified. These values were not found to be equivalent, i.e. K THi assisted fracture mechanism was determined to be strain controlled for all of the alloys in this study, and the micromechanics of strain controlled fracture are used to explain the observed disparities between the different threshold measurements. K THa and K THi differ because the strain singularity of a stationary crack is stronger than that of a propagating crack; K THa must be larger than K THi to achieve equivalent crack tip strain at the same distance from the crack tip. Hydrogen interacts with deformation mechanisms, enhancing strain localization and consequently altering both the nucleation and growth stages of strain controlled fracture mechanisms. The timing of load application and hydrogen exposure, i.e., sequential for constant displacement tests and concurrent for rising displacement tests, leads to differences in the strain history relative to the environmental exposure history and promotes the disparity between K_{{THi}}^{*} and K THi. K THi is the only conservative measurement of fracture threshold among the methods presented here.

  19. Transport Coefficients of Black M3-Branes

    CERN Document Server

    Dhuria, Mansi

    2014-01-01

    The local uplift via local SYZ mirror symmetry of (M)N (fractional)D3-branes, and wrapped N_f flavor D7-branes in the presence of a black-hole resulting in a non-Kaehler resolved warped deformed conifold (NKRWDC) in [1], was carried out in [2] and resulted in black M3-branes; the deviation from the ISD condition of G_3 proportional to the square of the resolution parameter, in the limits of [1] and MQGP limit of [2], imposed on (g_s,M,N), can be ignored [3]. The uplift, if valid globally, asymptotes to M5-branes wrapping a two-cycle (homologously an (large) integer sum of two-spheres) in AdS_5xM_6. Interestingly, in the limits of [1]/ [2], assuming the deformation > resolution, by estimating the five SU(3) structure torsion (\\tau) classes W_{1,2,3,4,5} we show that \\tau\\in W_5 in the large-r limit, implying the NKRWDC reduces to a warped Kaehler deformed conifold. Further, the local T^3 of [2] in the large-r limit and the limits of [1] and the `MQGP' limit of [2], satisfies the same conditions as the maximal ...

  20. Paths of Heritable Mitochondrial DNA Mutation and Heteroplasmy in Reference and gas-1 Strains of Caenorhabditis elegans

    Science.gov (United States)

    Wernick, Riana I.; Estes, Suzanne; Howe, Dana K.; Denver, Dee R.

    2016-01-01

    Heteroplasmy—the presence of more than one mitochondrial DNA (mtDNA) sequence type in a cell, tissue, or individual—impacts human mitochondrial disease and numerous aging-related syndromes. Understanding the trans-generational dynamics of mtDNA is critical to understanding the underlying mechanisms of mitochondrial disease and evolution. We investigated mtDNA mutation and heteroplasmy using a set of wild-type (N2 strain) and mitochondrial electron transport chain (ETC) mutant (gas-1) mutant Caenorhabditis elegans mutation-accumulation (MA) lines. The N2 MA lines, derived from a previous experiment, were bottlenecked for 250 generations. The gas-1 MA lines were created for this study, and bottlenecked in the laboratory for up to 50 generations. We applied Illumina-MiSeq DNA sequencing to L1 larvae from five gas-1 MA lines and five N2 MA lines to detect and characterize mtDNA mutation and heteroplasmic inheritance patterns evolving under extreme drift. mtDNA copy number increased in both sets of MA lines: three-fold on average among the gas-1 MA lines and five-fold on average among N2 MA lines. Eight heteroplasmic single base substitution polymorphisms were detected in the gas-1 MA lines; only one was observed in the N2 MA lines. Heteroplasmy frequencies ranged broadly in the gas-1 MA lines, from as low as 2.3% to complete fixation (homoplasmy). An initially low-frequency (<5%) heteroplasmy discovered in the gas-1 progenitor was observed to fix in one gas-1 MA line, achieve higher frequency (37.4%) in another, and be lost in the other three lines. A similar low-frequency heteroplasmy was detected in the N2 progenitor, but was lost in all five N2 MA lines. We identified three insertion-deletion (indel) heteroplasmies in gas-1 MA lines and six indel variants in the N2 MA lines, most occurring at homopolymeric nucleotide runs. The observed bias toward accumulation of single nucleotide polymorphisms in gas-1 MA lines is consistent with the idea that impaired

  1. Paths of heritable mitochondrial DNA mutation and heteroplasmy in reference and gas-1 strains of Caenorhabditis elegans

    Directory of Open Access Journals (Sweden)

    Riana eWernick

    2016-04-01

    Full Text Available Heteroplasmy—the presence of more than one mitochondrial DNA (mtDNA sequence type in a cell, tissue, or individual—impacts human mitochondrial disease and numerous aging-related syndromes. Understanding the trans-generational dynamics of mtDNA is critical to understanding the underlying mechanisms of mitochondrial disease and evolution. We investigated mtDNA mutation and heteroplasmy using a set of wild-type (N2 strain and mitochondrial electron transport chain mutant (gas-1 mutant Caenohabditis elegans mutation-accumulation (MA lines. The N2 MA lines, derived from a previous experiment, were bottlenecked for 250 generations. The gas-1 MA lines were created for this study, and bottlenecked in the laboratory for up to 50 generations. We applied Illumina-MiSeq DNA sequencing to L1 larvae from five gas-1 MA lines and five N2 MA lines to detect and characterize mtDNA mutation and heteroplasmic inheritance patterns evolving under extreme drift. mtDNA copy number increased in both sets of MA lines: 3-fold on average among the gas-1 MA lines and 5-fold on average among N2 MA lines. Eight heteroplasmic single base substitution polymorphisms were detected in the gas-1 MA lines; only one was observed in the N2 MA lines. Heteroplasmy frequencies ranged broadly in the gas-1 MA lines, from as low as 2.3% to complete fixation (homoplasmy. An initially low-frequency (<5% heteroplasmy discovered in the gas-1 progenitor was observed to fix in one gas-1 MA line, achieve higher frequency (37.4% in another, and be lost in the other three lines. A similar low-frequency heteroplasmy was detected in the N2 progenitor, but was lost in all five N2 MA lines. We identified three insertion-deletion (indel heteroplasmies in gas-1 MA lines and six indel variants in the N2 MA lines, most occurring at homopolymeric nucleotide runs. The observed bias toward accumulation of single nucleotide polymorphisms in gas-1 MA lines is consistent with the idea that impaired

  2. New BMW M3 sports coupe; Neues Sportcoupe M3 von BMW

    Energy Technology Data Exchange (ETDEWEB)

    Biermann, A.; Friedmann, S.; Gehrig, H.; Huebner, W.; Weidhase, U. [Bayerische Motoren Werke AG (BMW), Muenchen (Germany); Koplenig, W. [BMW, Muenchen (Germany). Fachbereich Karosserie

    2000-10-01

    Since 1972 Motorsport (which has been known as BMW M since 1994) has been manufacturing automobiles of exceptionally sporting character on the basis of suitable series-production cars. With its new M3, BMW M continues this tradition. It is a sports coupe based on the latest BMW 3 Series model line. Its sports design embodies the essentials of BMW M's performance philosophy. Both visible and invisible 'highlights' such as the new high-speed driveline rating elevate its longitudinal and lateral driving dynamics to the level of a racing car. We have also succeeded in maintaining the basic car's unlimited suitability for everyday use. The new M3 is therefore a fully-fledged sports car without the typical disadvantages of this type of vehicle. (orig.) [German] Bereits seit 1972 entstehen bei BMW Motorsport (seit 1994 BMW M) auf der Basis von Serienfahrzeugen Automobile mit aussergewoehnlichen sportlichen Eigenschaften. Mit dem neuen M3, abgeleitet von der aktuellen BMW Dreier-Reihe, setzt BMW M diese Tradition fort. Das Sportcoupe erschliesst ueber die weiterentwickelte Hochdrehzahlauslegung eine Fahrdynamik in Laengs- und Querrichtung auf dem Niveau eines Rennsportwagens. Gleichzeitig ist es gelungen, die uneingeschraenkte Alltagstauglichkeit des Basis-Fahrzeugs zu erhalten. Der neue M3 ist somit ein vollwertiger Sportwagen, vermeidet aber dessen typische Nachteile. (orig.)

  3. STRAIN-HARDENING OF DOUGH AS A REQUIREMENT FOR GAS RETENTION

    NARCIS (Netherlands)

    VANVLIET, T; JANSSEN, AM; BLOKSMA, AH; WALSTRA, P

    1992-01-01

    Mechanisms that can be responsible for the ability of wheat flour doughs to retain gas are discussed. It is concluded that the relevant types of physical instabilities are Ostwald ripening (disproportionation) and coalescence of gas cells. The extent of Ostwald ripening is probably primarily

  4. Seepage laws of two kinds of disastrous gas in complete stress-strain process of coal

    Institute of Scientific and Technical Information of China (English)

    Cao Shugang; Guo Ping; Zhang Zunguo; Li Yi; Wang Yong

    2011-01-01

    The similarities and differences in seepage flow evolution laws of CH4 and CO2 during complete stressstrain process of samples were comparatively analyzed.The results show that the seepage flow evolution laws of CH4 and CO2 are extremely similar during the stress-strain process,showing that the characteristic first decreased and then increased.A mathematical model was also established according to the relationship of seepage velocity and axial strain.However,due to the strong adsorption ability of CO2,the coal samples generated a more serious “Klinkenberg effect” under the condition of CO2.Owing to this,the CO2 seepage flow resulted into occurrence of “stagnation” phenomenon during the late linear elastic stage Ⅱ.In the strain consolidation stage Ⅲ,the increment rate of CH4 seepage velocity was significantly greater than that of CO2.In the stress descent stage Ⅳ,when the axial load reached the peak pressure of coal,the increment rates of CH4 seepage velocity presented a turning point.But the changing rate of CO2 seepage velocity still remained slow and a turning point was presented at one time after the peak of the strain pressure,which showed an obvious feature of hysteresis.

  5. Monitoring Local Strain in a Thermal Barrier Coating System Under Thermal Mechanical Gas Turbine Operating Conditions

    Science.gov (United States)

    Manero, Albert; Sofronsky, Stephen; Knipe, Kevin; Meid, Carla; Wischek, Janine; Okasinski, John; Almer, Jonathan; Karlsson, Anette M.; Raghavan, Seetha; Bartsch, Marion

    2015-07-01

    Advances in aircraft and land-based turbine engines have been increasing the extreme loading conditions on traditional engine components and have incited the need for improved performance with the use of protective coatings. These protective coatings shield the load-bearing super alloy blades from the high-temperature combustion gases by creating a thermal gradient over their thickness. This addition extends the life and performance of blades. A more complete understanding of the behavior, failure mechanics, and life expectancy for turbine blades and their coatings is needed to enhance and validate simulation models. As new thermal-barrier-coated materials and deposition methods are developed, strides to effectively test, evaluate, and prepare the technology for industry deployment are of paramount interest. Coupling the experience and expertise of researchers at the University of Central Florida, The German Aerospace Center, and Cleveland State University with the world-class synchrotron x-ray beam at the Advanced Photon Source in Argonne National Laboratory, the synergistic collaboration has yielded previously unseen measurements to look inside the coating layer system for in situ strain measurements during representative service loading. These findings quantify the in situ strain response on multilayer thermal barrier coatings and shed light on the elastic and nonelastic properties of the layers and the role of mechanical load and internal cooling variations on the response. The article discusses the experimental configuration and development of equipment to perform in situ strain measurements on multilayer thin coatings and provides an overview of the achievements thus far.

  6. Genomic standards consortium workshop: metagenomics, metadata and metaanalysis (M3).

    Science.gov (United States)

    Sterk, Peter; Hirschman, Lynette; Field, Dawn; Wooley, John

    2010-01-01

    The M3 workshop has, as its primary focus, the rapidly growing area of metagenomics, including the metadata standards and the meta-analysis approaches needed to organize, process and interpret metagenomics data. The PSB Workshop builds on the first M3 meeting, a Special Interest Group (SIG) meeting at ISMB 2009, organized by the Genomics Standards Consortium.

  7. Chemokine Binding Protein M3 of Murine Gammaherpesvirus 68 Modulates the Host Response to Infection in a Natural Host

    Science.gov (United States)

    Hughes, David J.; Kipar, Anja; Leeming, Gail H.; Bennett, Elaine; Howarth, Deborah; Cummerson, Joanne A.; Papoula-Pereira, Rita; Flanagan, Brian F.; Sample, Jeffery T.; Stewart, James P.

    2011-01-01

    Murine γ-herpesvirus 68 (MHV-68) infection of Mus musculus-derived strains of mice is an attractive model of γ-herpesvirus infection. Surprisingly, however, ablation of expression of MHV-68 M3, a secreted protein with broad chemokine-binding properties in vitro, has no discernable effect during experimental infection via the respiratory tract. Here we demonstrate that M3 indeed contributes significantly to MHV-68 infection, but only in the context of a natural host, the wood mouse (Apodemus sylvaticus). Specifically, M3 was essential for two features unique to the wood mouse: virus-dependent inducible bronchus-associated lymphoid tissue (iBALT) in the lung and highly organized secondary follicles in the spleen, both predominant sites of latency in these organs. Consequently, lack of M3 resulted in substantially reduced latency in the spleen and lung. In the absence of M3, splenic germinal centers appeared as previously described for MHV-68-infected laboratory strains of mice, further evidence that M3 is not fully functional in the established model host. Finally, analyses of M3's influence on chemokine and cytokine levels within the lungs of infected wood mice were consistent with the known chemokine-binding profile of M3, and revealed additional influences that provide further insight into its role in MHV-68 biology. PMID:21445235

  8. Chemokine binding protein M3 of murine gammaherpesvirus 68 modulates the host response to infection in a natural host.

    Directory of Open Access Journals (Sweden)

    David J Hughes

    2011-03-01

    Full Text Available Murine γ-herpesvirus 68 (MHV-68 infection of Mus musculus-derived strains of mice is an attractive model of γ-herpesvirus infection. Surprisingly, however, ablation of expression of MHV-68 M3, a secreted protein with broad chemokine-binding properties in vitro, has no discernable effect during experimental infection via the respiratory tract. Here we demonstrate that M3 indeed contributes significantly to MHV-68 infection, but only in the context of a natural host, the wood mouse (Apodemus sylvaticus. Specifically, M3 was essential for two features unique to the wood mouse: virus-dependent inducible bronchus-associated lymphoid tissue (iBALT in the lung and highly organized secondary follicles in the spleen, both predominant sites of latency in these organs. Consequently, lack of M3 resulted in substantially reduced latency in the spleen and lung. In the absence of M3, splenic germinal centers appeared as previously described for MHV-68-infected laboratory strains of mice, further evidence that M3 is not fully functional in the established model host. Finally, analyses of M3's influence on chemokine and cytokine levels within the lungs of infected wood mice were consistent with the known chemokine-binding profile of M3, and revealed additional influences that provide further insight into its role in MHV-68 biology.

  9. M3: Matrix Multiplication on MapReduce

    DEFF Research Database (Denmark)

    Silvestri, Francesco; Ceccarello, Matteo

    2015-01-01

    M3 is an Hadoop library for performing dense and sparse matrix multiplication in MapReduce. The library is based on multi-round algorithms exploiting the 3D decomposition of the problem.......M3 is an Hadoop library for performing dense and sparse matrix multiplication in MapReduce. The library is based on multi-round algorithms exploiting the 3D decomposition of the problem....

  10. Complex quantum transport in a modulation doped strained Ge quantum well heterostructure with a high mobility 2D hole gas

    Science.gov (United States)

    Morrison, C.; Casteleiro, C.; Leadley, D. R.; Myronov, M.

    2016-09-01

    The complex quantum transport of a strained Ge quantum well (QW) modulation doped heterostructure with two types of mobile carriers has been observed. The two dimensional hole gas (2DHG) in the Ge QW exhibits an exceptionally high mobility of 780 000 cm2/Vs at temperatures below 10 K. Through analysis of Shubnikov de-Haas oscillations in the magnetoresistance of this 2DHG below 2 K, the hole effective mass is found to be 0.065 m0. Anomalous conductance peaks are observed at higher fields which deviate from standard Shubnikov de-Haas and quantum Hall effect behaviour due to conduction via multiple carrier types. Despite this complex behaviour, analysis using a transport model with two conductive channels explains this behaviour and allows key physical parameters such as the carrier effective mass, transport, and quantum lifetimes and conductivity of the electrically active layers to be extracted. This finding is important for electronic device applications, since inclusion of highly doped interlayers which are electrically active, for enhancement of, for example, room temperature carrier mobility, does not prevent analysis of quantum transport in a QW.

  11. Screening of formaldehyde-degrading strains and purification of waste gas containing formaldehyde by using a bio-trickling filter%甲醛降解菌的筛选及生物膜填料塔净化甲醛废气

    Institute of Scientific and Technical Information of China (English)

    李章良; 陈勇; 林小园; 陈祯怀; 曾涛; 林毓明

    2011-01-01

    A strain named JQ-1, which was good at removing formaldehyde, was screened from the collected activated sludge. The strain was preliminary identified as Pseudononas sp. according to its morphology. The strain JQ-1 was inoculated on the packing in the bio-trickling filter, and then system for biological treatment of waste gas containing formaldehyde by using a bio-trickling filter was established. After the system was stably, the experiment of using a bio-trickling filter to treat waste gas containing formaldehyde at low concentrations was performed. The experimental results showed that the removal efficiency of formaldehyde was up to over 93% when inlet formaldehyde concentration was less than 33 mg/m3. If it was over 33 mg/m3, the removal efficiency decreased significantly. As the inlet gas flow was continuously increasing, the removal efficiency was gradually declined. The removal efficiency dropped from 92.5% to 73.4% accompanied with the inlet gas flow increasing from 0.06 m3/h to 0.18 m3/h. The spray liquid flow was also an important factor to affect the removal efficiency of formaldehyde. When the spray liquid flow reached 1.8 L/h, the removal efficiency was the best and up to 92.7%. Based on the experimental data, the related basic theory was discussed.%从采集活性污泥中筛选得到1株具有高效降解甲醛能力的菌株并命名为JQ-1,根据其形态特征,初步判断菌株JQ-1属假单胞菌属.采用菌株JQ-1对生物膜填料塔内填料进行生物挂膜,组成甲醛废气生物处理系统,在系统稳定后进行了生物膜填料塔净化处理低浓度甲醛废气的初步实验研究.实验结果表明:入口甲醛浓度<33mg/m3时,甲醛净化效率维持在93%以上,当超过此值时,净化效率有较大幅度下降;随着进气流量的增加,甲醛净化效率是下降的,当进气流量从0.06 m3/h 增加到0.18 m3/h时,甲醛净化效率则从92.5%下降至73.4%;喷淋流量对甲醛净化效率也

  12. M3D project for simulation studies of plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Park, W.; Belova, E.V.; Fu, G.Y. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Strauss, H.R. [New York Univ., NY (United States); Sugiyama, L.E. [Massachusetts Inst. of Tech., Cambridge, MA (United States)

    1998-12-31

    The M3D (Multi-level 3D) project carries out simulation studies of plasmas of various regimes using multi-levels of physics, geometry, and mesh schemes in one code package. This paper and papers by Strauss, Sugiyama, and Belova in this workshop describe the project, and present examples of current applications. The currently available physics models of the M3D project are MHD, two-fluids, gyrokinetic hot particle/MHD hybrid, and gyrokinetic particle ion/two-fluid hybrid models. The code can be run with both structured and unstructured meshes.

  13. Assembly language programming ARM Cortex-M3

    CERN Document Server

    Mahout, Vincent

    2013-01-01

    ARM designs the cores of microcontrollers which equip most "embedded systems" based on 32-bit processors. Cortex M3 is one of these designs, recently developed by ARM with microcontroller applications in mind. To conceive a particularly optimized piece of software (as is often the case in the world of embedded systems) it is often necessary to know how to program in an assembly language.This book explains the basics of programming in an assembly language, while being based on the architecture of Cortex M3 in detail and developing many examples.It is written for people who have never pr

  14. Optimizing Concurrent M3-Transactions: A Fuzzy Constraint Satisfaction Approach

    Directory of Open Access Journals (Sweden)

    Peng LI

    2004-10-01

    Full Text Available Due to the high connectivity and great convenience, many E-commerce application systems have a high transaction volume. Consequently, the system state changes rapidly and it is likely that customers issue transactions based on out-of-date state information. Thus, the potential of transaction abortion increases greatly. To address this problem, we proposed an M3-transaction model. An M3-transaction is a generalized transaction where users can issue their preferences in a request by specifying multiple criteria and optional data resources simultaneously within one transaction. In this paper, we introduce the transaction grouping and group evaluation techniques. We consider evaluating a group of M3-transactions arrived to the system within a short duration together. The system makes optimal decisions in allocating data to transactions to achieve better customer satisfaction and lower transaction failure rate. We apply the fuzzy constraint satisfaction approach for decision-making. We also conduct experimental studies to evaluate the performance of our approach. The results show that the M3-transaction with group evaluation is more resilient to failure and yields much better performance than the traditional transaction model.

  15. Optimizing Concurrent M3-Transactions: A Fuzzy Constraint Satisfaction Approach

    Directory of Open Access Journals (Sweden)

    Peng LI

    2004-10-01

    Full Text Available Due to the high connectivity and great convenience, many E-commerce application systems have a high transaction volume. Consequently, the system state changes rapidly and it is likely that customers issue transactions based on out-of-date state information. Thus, the potential of transaction abortion increases greatly. To address this problem, we proposed an M3-transaction model. An M3-transaction is a generalized transaction where users can issue their preferences in a request by specifying multiple criteria and optional data resources simultaneously within one transaction. In this paper, we introduce the transaction grouping and group evaluation techniques. We consider evaluating a group of M3-transactions arrived to the system within a short duration together. The system makes optimal decisions in allocating data to transactions to achieve better customer satisfaction and lower transaction failure rate. We apply the fuzzy constraint satisfaction approach for decision-making. We also conduct experimental studies to evaluate the performance of our approach. The results show that the M3-transaction with group evaluation is more resilient to failure and yields much better performance than the traditional transaction model.

  16. M3: An Open Model for Measuring Code Artifacts

    NARCIS (Netherlands)

    Izmaylova, A.; Klint, P.; Shahi, A.; Vinju, J.J.

    2013-01-01

    In the context of the EU FP7 project ``OSSMETER'' we are developing an infra-structure for measuring source code. The goal of OSSMETER is to obtain insight in the quality of open-source projects from all possible perspectives, including product, process and community. This is a "white paper" on M3,

  17. Low-lying electronic states of M(3)O(9)(-) and M(3)O(9)(2-) (M = Mo, W).

    Science.gov (United States)

    Li, Shenggang; Dixon, David A

    2007-11-01

    Multiple low-lying electronic states of M(3)O(9)(-) and M(3)O(9)(2-) (M = Mo, W) arise from the occupation of the near-degenerate low-lying virtual orbitals in the neutral clusters. We used density functional theory (DFT) and coupled cluster theory (CCSD(T)) with correlation consistent basis sets to study the structures and energetics of the electronic states of these anions. The adiabatic and vertical electron detachment energies (ADEs and VDEs) of the anionic clusters were calculated with 27 exchange-correlation functionals including one local spin density approximation functional, 13 generalized gradient approximation (GGA) functionals, and 13 hybrid GGA functionals, as well as the CCSD(T) method. For M(3)O(9)(-), CCSD(T) and nearly all of the DFT exchange-correlation functionals studied predict the (2)A(1) state arising from the Jahn-Teller distortion due to singly occupying the degenerate e' orbital to be lower in energy than the (2)A(1)' state arising from singly occupying the nondegenerate a(1)' orbital. For W(3)O(9)(-), the (2)A(1) state was predicted to have essentially the same energy as the (2)A(1)' state at the CCSD(T) level with core-valence correlation corrections included and to be higher in energy or essentially isoenergetic with most DFT methods. The calculated VDEs from the CCSD(T) method are in reasonable agreement with the experimental values for both electronic states if estimates for the corrections due to basis set incompleteness are included. For M(3)O(9)(2-), the singlet state arising from doubly occupying the nondegenerate a(1)' orbital was predicted to be the most stable state for both M = Mo and W. However, whereas M(3)O(9)(2-) was predicted to be less stable than M(3)O(9)(-), W(3)O(9)(2-) was predicted to be more stable than W(3)O(9)(-).

  18. Residual stress in a M3:2 PM high speed steel; effect of mechanical loading

    DEFF Research Database (Denmark)

    Højerslev, Christian; Odén, Magnus; Carstensen, Jesper V.

    2001-01-01

    X-ray lattice strains were investigated in an AISI M3:2 PM high-speed steel in the as heat treated condition and after exposure to alternating mechanical load. The volume changes during heat treatment were monitored with dilatometry. Hardened and tempered AISI M3:2 steel consists of tempered lath...... martensite and the carbides M6C,V8C7 and M23C6. In the as heat treated condition the stress state is triaxial. The primary carbides M6C and V8C7 experience a compressive state of stress. Exposure to an alternating mechanical load, changes the states of stress of V8C7 and tempered martensite, but does...... not appear to change the state of stress in M6C....

  19. Performance of 500 m3 TankCell® at Kevitsa Cu-Ni-PGM concentrator

    Directory of Open Access Journals (Sweden)

    Mattsson Toni

    2016-01-01

    Full Text Available Outotec TankCell e500 flotation cell, with 500 m3 of efficient flotation volume, has been in operation since October 2014 at Kevitsa Cu-Ni-PGM concentrator as the first Cu rougher flotation cell. The 500 m3 flotation cell has proven to provide metallurgical superiority at very low specific power. On average the cell has recovered 71% of copper contained in the flotation feed. The cell has produced the concentrate with the Cu grade equal to 17% Cu. The typical specific power for the cell is around 0.4 kW/m3 (blower power not included. After the start-up of the cell the operating parameters have varied. The mixing speed have varied from 4.9 to 7.0 m/s and the superficial gas velocity from 0.3 to 1.5 cm/s. At various operating parameters the mixing, gas dispersion and metallurgical performance of the cell have been evaluated. In this paper a review of the hydrodynamic and metallurgical performance of the cell is presented. The paper focuses on the interactions of mixing intensity, bubble size and metallurgical performance in industrial application.

  20. M3与M5的MICM鉴别

    Institute of Scientific and Technical Information of China (English)

    索翠平; 李寅; 赵霞

    2003-01-01

    @@ 急性早幼粒细胞自血病(M3型,acute promyelocytic leukemia,APL)和急性单核细胞白血病(M5型,acute monocytic leukemia,AMOL)同属于急性非淋巴细胞白血病.二者在临床与形态上均有相似之处,特别是细颗粒型急性早幼粒细胞白血病(M3b)在形态上更易被误诊为急性单核细胞白血病.但二者的治疗与预后却有很大的区别.在此,结合MICM分型原则对二者加以鉴别,以免造成误诊,导致不应有的后果.

  1. Chemotactic responses to gas oil of Halomonas spp. strains isolated from saline environments in Argentina Respuesta quimiotáctica hacia gas oil de cepas de Halomonas spp. aisladas de ambientes salinos de Argentina

    Directory of Open Access Journals (Sweden)

    Sebastián D´Ippólito

    2011-06-01

    Full Text Available In this study, two halophilic bacterial strains isolated from saline habitats in Argentina grew in the presence of gas oil. They were identified as Halomonas spp. and Nesterenkonia sp. by 16S ribosomal RNA sequencing. Chemotaxis towards gas oil was observed in Halomonas spp. by using swimming assays.En el presente trabajo se aislaron dos cepas bacterianas halofílicas a partir de muestras obtenidas en ambientes salinos de Argentina, que crecieron en presencia de gasoil como única fuente de carbono. Las cepas aisladas se identificaron como Halomonas spp. y Nesterenkonia sp. mediante secuenciación del gen del ARN ribosomal 16S. En ensayos de swimming, las cepas del genero Halomonas spp. mostraron una respuesta quimiotáctica hacia el gas oil.

  2. Study of low-defect and strain-relaxed GeSn growth via reduced pressure CVD in H2 and N2 carrier gas

    Science.gov (United States)

    Margetis, J.; Mosleh, A.; Al-Kabi, S.; Ghetmiri, S. A.; Du, W.; Dou, W.; Benamara, M.; Li, B.; Mortazavi, M.; Naseem, H. A.; Yu, S.-Q.; Tolle, J.

    2017-04-01

    High quality, thick (up to 1.1 μm), strain relaxed GeSn alloys were grown on Ge-buffered Si (1 0 0) in an ASM Epsilon® chemical vapor deposition system using SnCl4 and low-cost commercial GeH4 precursors. The significance of surface chemistry in regards to growth rate and Sn-incorporation is discussed by comparing growth kinetics data in H2 and N2 carrier gas. The role of carrier gas is also explored in the suppression of Sn surface segregation and evolution of layer composition and strain profiles via secondary ion mass spectrometry and X-ray diffraction. Transmission electron microscopy revealed the spontaneous compositional splitting and formation of a thin intermediate layer in which dislocations are pinned. This intermediate layer enables the growth of a thick, strain relaxed, and defect-free epitaxial layer on its top. Last, we present photoluminescence results which indicate that both N2 and H2 growth methods produce optoelectronic device quality material.

  3. Structure and dynamics of the M3 muscarinic acetylcholine receptor

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Andrew C.; Hu, Jianxin; Pan, Albert C.; Arlow, Daniel H.; Rosenbaum, Daniel M.; Rosemond, Erica; Green, Hillary F.; Liu, Tong; Chae, Pil Seok; Dror, Ron O.; Shaw, David E.; Weis, William I.; Wess, Jürgen; Kobilka, Brian K. (Stanford); (NIH); (D.E. Shaw); (Hanyang); (UTSMC)

    2012-03-01

    Acetylcholine, the first neurotransmitter to be identified, exerts many of its physiological actions via activation of a family of G-protein-coupled receptors (GPCRs) known as muscarinic acetylcholine receptors (mAChRs). Although the five mAChR subtypes (M1-M5) share a high degree of sequence homology, they show pronounced differences in G-protein coupling preference and the physiological responses they mediate. Unfortunately, despite decades of effort, no therapeutic agents endowed with clear mAChR subtype selectivity have been developed to exploit these differences. We describe here the structure of the G{sub q/11}-coupled M3 mAChR ('M3 receptor', from rat) bound to the bronchodilator drug tiotropium and identify the binding mode for this clinically important drug. This structure, together with that of the G{sub i/o}-coupled M2 receptor, offers possibilities for the design of mAChR subtype-selective ligands. Importantly, the M3 receptor structure allows a structural comparison between two members of a mammalian GPCR subfamily displaying different G-protein coupling selectivities. Furthermore, molecular dynamics simulations suggest that tiotropium binds transiently to an allosteric site en route to the binding pocket of both receptors. These simulations offer a structural view of an allosteric binding mode for an orthosteric GPCR ligand and provide additional opportunities for the design of ligands with different affinities or binding kinetics for different mAChR subtypes. Our findings not only offer insights into the structure and function of one of the most important GPCR families, but may also facilitate the design of improved therapeutics targeting these critical receptors.

  4. The boundary RSOS \\mathcal{M}(3,5) model

    CERN Document Server

    Deeb, Omar El

    2015-01-01

    We consider the critical non-unitary minimal model {\\cal M}(3,5) with integrable boundaries. We analyze the patterns of zeros of the eigenvalues of the transfer matrix and then determine the spectrum of the critical theory through the Thermodynamic Bethe Ansatz (TBA) equations. We derive these equations for all excitations by solving, the TBA functional equation satisfied by the transfer matrices of the associated A_{4} RSOS lattice model of Forrester and Baxter in Regime III, then determine their corresponding energies. The excitations are classified in terms of (m,n) systems.

  5. 3000m3/h cutter-suction dredge

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ In October 2004, the Fumin 9 3000 m3/h cutter-suction dredge co-designed by the Dutch IHC and Guangzhou Wenchong Shipyard went through a dock usability test and a 25 meter clean water test. The dredge is the largest of its kind in China, and the most advanced and most efficient cutter-suction dredge in the world. The IHC was responsible for the design of the ship till its working design was taken over by Guangzhou Wenchong Shipyard, the builder of the dredge, who had started its construction on October 23, 2003.

  6. 针对MCU应用的Cortex-M3

    Institute of Scientific and Technical Information of China (English)

    费浙平

    2005-01-01

    传统上MCU领域一直由4/8位架构占据了主导地位,部分采用16位架构,而32位才刚起步,在多数人印象中它还是一种奢侈的高端应用。但近几年这种情况已有了很大变化,越来越多的设计采用32位MCU架构,而ARMCotex—M3的面世也为32位MCU应用带来更多可能。

  7. Measuring unsteady pressure on rotating compressor blades. [with semiconductor strain gages under gas turbine engine operating conditions

    Science.gov (United States)

    Englund, D. R.; Grant, H. P.; Lanati, G. A.

    1979-01-01

    The capability for accurate measurement of unsteady pressure on the surface of compressor and fan blades during engine operation was established. Tests were run on miniature semiconductor strain gage pressure transducers mounted in several arrangements. Both surface mountings and recessed flush mountings were tested. Test parameters included mounting arrangement, blade material, temperature, local strain in the blade, acceleration normal to the transducer diaphragm, centripetal acceleration, and pressure. Test results showed no failures of transducers or mountings and indicated an uncertainty of unsteady pressure measurement of approximately + or - 6%, plus 0.1 kPa for a typical application.

  8. Finite Element Model to Analyze an Installation Load-based Stress-Strain State of the Parts Forming Gas Joint of a Medium-Speed Diesel Engine

    Directory of Open Access Journals (Sweden)

    N. D. Chainov

    2015-01-01

    Full Text Available The paper considers a developed computational model to study a stress-strain state of the assembly unit components of a medium-speed diesel engine of new generation, type CH26.5/31, which comprises a cylinder head, a sleeve, a gasket, a block, two mounting studs and four power studs.The developed three-dimensional finite element model presented in this article allows us to take into consideration all the components that make up a gas joint, regardless of their geometric complexity. Its use enables us to estimate the cylinder head - gasket - sleeve tightness of sealing when applying the mounting, temperature, and gas loads, to define the stress and strain components of parts, as well as to study the gasket condition, including pressure distribution across its surface.Based on the results obtained in the study the finite element model of the cylinder head was modified considering a more detailed description of its geometry, thus reducing the principal tensile stresses.

  9. Non-invasive timing of gas gun-launched projectiles using external surface-mounted optical fiber-Bragg grating strain gauges.

    Science.gov (United States)

    Goodwin, Peter M; Marshall, Bruce R; Stevens, Gerald D; Dattelbaum, Dana M

    2013-03-01

    Non-invasive detection methods for tracking gun-launched projectiles are important not only for assessment of gun performance but are also essential for timing a variety of diagnostics, for example, to investigate plate-impact events for shock compression experiments. Measurement of the time of passage of a projectile moving inside of the gun barrel can be achieved by detection of the transient hoop strain induced in the barrel of a light-gas gun by the passage of the projectile using external, barrel surface-mounted optical fiber-Bragg grating strain gauges. Optical fiber-Bragg gratings have been implemented and their response characterized on single-stage and two-stage light gas guns routinely used for dynamic experimentation at Los Alamos National Laboratory. Two approaches, using either broadband or narrowband illumination, were used to monitor changes in the Bragg wavelength of the fiber-Bragg gratings. The second approach, using narrowband laser illumination, offered the highest sensitivity. The feasibility of using these techniques to generate early, pre-event signals useful for triggering high-latency diagnostics was demonstrated.

  10. 2D Electron Gas with 100% Spin-Polarization in the (LaMnO 3 ) 2 /(SrTiO 3 ) 2 Superlattice under Uniaxial Strain

    KAUST Repository

    Cossu, Fabrizio

    2014-07-28

    By first-principles calculations we investigate the structural, electronic, and magnetic properties of the (LaMnO3)2/(SrTiO3)2 superlattice. We find that a monoclinic C2h symmetry is energetically favorable and that the spins order ferromagnetically. Under both compressive and tensile uniaxial strain the electronic structure of the superlattice shows a half-metallic character. In particular, a fully spin-polarized two-dimensional electron gas, which traces back to the Ti 3dxy orbitals, is achieved under compressive uniaxial strain. The (LaMnO3)2/(SrTiO3)2 superlattice is analysed with respect to its structure, magnetism, and electronic properties. Our results demonstrate that uniaxial strain in an experimentally accessible range, both tensile and compressive, can be used to induce half-metallicity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Magnetic circular dichroism of porphyrin lanthanide M3+ complexes.

    Science.gov (United States)

    Andrushchenko, Valery; Padula, Daniele; Zhivotova, Elena; Yamamoto, Shigeki; Bouř, Petr

    2014-10-01

    Lanthanide complexes exhibit interesting spectroscopic properties yielding many applications as imaging probes, natural chirality amplifiers, and therapeutic agents. However, many properties are not fully understood yet. Therefore, we applied magnetic circular dichroism (MCD) spectroscopy, which provides enhanced information about the underlying electronic structure to a series of lanthanide compounds. The metals in the M(3+) state included Y, La, Eu, Tb, Dy, Ho, Er, Tm, Yb, and Lu; the spectra were collected for selected tetraphenylporphin (TPP) and octaethylporphin (OEP) complexes in chloroform. While the MCD and UV-VIS absorption spectra were dominated by the porphyrin signal, metal binding significantly modulated them. MCD spectroscopy was found to be better suited to discriminate between various species than absorption spectroscopy alone. The main features and trends in the lanthanide series observed in MCD and absorption spectra of the complexes could be interpreted at the Density Functional Theory (DFT) level, with effective core potentials on metal nuclei. The sum over state (SOS) method was used for simulation of the MCD intensities. The combination of the spectroscopy and quantum-chemical computations is important for understanding the interactions of the metals with the organic compounds.

  12. Real-time monitoring of genetically modified Chlamydomonas reinhardtii during the Foton M3 space mission

    Science.gov (United States)

    Lambreva, M.; Rea, G.; Antonacci, A.; Serafini, A.; Damasso, M.; Pastorelli, S.; Margonelli, A.; Johanningmeier, U.; Bertalan, I.; Pezzotti, G.; Giardi, M. T.

    2008-09-01

    Long-term space exploration, colonization or habitation requires biological life support systems capable to cope with the deleterious space environment. The use of oxygenic photosynthetic microrganisms is an intriguing possibility mainly for food, O2 and nutraceutical compounds production. The critical points of utilizing plants- or algae-based life support systems are the microgravity and the ionizing radiation, which can influence the performance of these organisms. The aim of the present study was to assess the effects of space environment on the photosynthetic activity of various microrganisms and to select space stresstolerant strains. Photosystem II D1 protein sitedirected and random mutants of the unicellular green alga Chlamydomonas reinhardtii [1] were used as a model system to test and select the amino acid substitutions capable to account for space stress tolerance. We focussed our studies also on the accumulation of the Photosystem II photoprotective carotenoids (the xantophylls violaxanthin, anteraxanthin and zeaxanthin), powerful antioxidants that epidemiological studies demonstrated to be human vision protectors. For this purpose some mutants modified at the level of enzymes involved in the biosynthesis of xanthophylls were included in the study [2]. To identify the consequences of the space environment on the photosynthetic apparatus the changes in the Photosystem II efficiency were monitored in real time during the ESA-Russian Foton- M3 mission in September 2007. For the space flight a high-tech, multicell fluorescence detector, Photo-II, was designed and built by the Centre for Advanced Research in Space Optics in collaboration with Kayser-Italy, Biosensor and DAS. Photo-II is an automatic device developed to measure the chlorophyll fluorescence and to provide a living conditions for several different algae strains (Fig.1). Twelve different C. reinhardti strains were analytically selected and two replications for each strain were brought to space

  13. Hemopoietic tissue in newts flown aboard Foton M3

    Science.gov (United States)

    Domaratskaya, Elena I.; Almeida, Eduardo; Butorina, Nina N.; Nikonova, Tatyana M.; Grigoryan, Eleonora N.; Poplinskaya, Valentina A.; Souza, Kenneth; Skidmore, Mike

    The effect of 12-day spaceflight aboard the Foton-M3 biosatellite on the hematopoietic tissue of P. waltl newts was studied. These animals used at the same time in regeneration experiments after lens and tail tip amputation. In flight and synchronous groups there were performed video recording, temperature and radiation monitoring and continuous contact (via skin) with thymidine analog BrdU. We took differential blood counts and assessed histologically the liver in the flight (F), basal (BC) and synchronous (SC)control groups of animals. In the peripheral blood, we identified neutrophils, eosinophils, basophils, lymphocytes, and monocytes. Lymphocytes (L) and neutrophils (N) prevailed, accounting for about 60 and 20% of white blood cells, respectively. The spaceflight had no apparent effect on the differential blood count in the F group: neither the L and N contents nor the maturing to mature N - ratio differed from those in the control groups. No significant differences between F, SC and BC groups were observed with respect to the structure of hematopoietic areas and the liver morphology. As in Foton-M2, BrdU labeled cells revealed in blood as well as in the hemopoietic areas of the liver. However, in previous experiments performed at satellites Bion-10 and Foton-M2 the changes in peripheral blood contents were registered in operated F newts, and we supposed it could be the result of additive effects of spaceflight factors and stimulation of reparative potency and stress due to surgical operation. Possibly, the temperature conditions also may provide some influence on blood cell content of newts that belong to poikilothermic animals. Thus, in present experiment F and SC groups were reared in the same temperature regims, whereas it was nearly 3o C differences between SC and F groups exposed on Foton-M2. At the same time as it was found in experiments on Bion-11 and Foton-M2 spaceflight factors did not affect on differential blood counts of intact non

  14. Strain effects on the spin polarized electron gas in ABO3/SrTiO3 (A = Pr, Nd and B = Al, Ga) heterostructures

    KAUST Repository

    Nazir, Safdar

    2013-04-11

    The spin polarized two dimensional electron gas in the correlated ABO3/SrTiO3 (A = Pr, Nd and B = Al, Ga) heterostructures is investigated by ab-initio calculations using density functional theory. Structural relaxation shows a strong buckling at and near the TiO2 terminated n-type interface (IFs) due to significant TiO6 octahedral distortions. We find in all cases, metallic states in a very narrow region of the SrTiO3, in agreement with experimental results. We demonstrate that the interface magnetism strongly reacts to the magnitude of the lattice strain. The orbital occupations and, hence, the charge carrier density change systematically as a function of the lattice mismatch between the component materials.

  15. Transport coefficients of black MQGP M3-branes

    Energy Technology Data Exchange (ETDEWEB)

    Dhuria, Mansi [Physical Research Laboratory, Theoretical Physics Division, Ahmedabad (India); Misra, Aalok [Indian Institute of Technology, Department of Physics, Roorkee, Uttaranchal (India)

    2015-01-01

    The Strominger-Yau-Zaslow (SYZ) mirror, in the 'delocalised limit' of Becker et al. (Nucl Phys B 702:207, 2004), of N D3-branes, M fractional D3-branes and N{sub f} flavour D7-branes wrapping a non-compact four-cycle in the presence of a black hole (BH) resulting in a non-Kahler resolved warped deformed conifold (NKRWDC) in Mia et al. (Nucl Phys B 839:187, 2010), was carried out in Dhuria and Misra (JHEP 1311:001, 2013) and resulted in black M3- branes. There are two parts in our paper. In the first we show that in the 'MQGP' limit discussed in Dhuria and Misra (JHEP 1311:001, 2013) a finite g{sub s} (and hence expected to be more relevant to QGP), finite g{sub s}M, N{sub f}, g{sub s}{sup 2}MN{sub f} and very large g{sub s}N, and very small (g,M{sup 2})/(N), we have the following. (i) The uplift, if valid globally (like Dasgupta et al., Nucl Phys B 755:21, 2006) for fractional D3 branes in conifolds, asymptotically goes to M5-branes wrapping a two-cycle (homologously a (large) integer sum of two-spheres) in AdS{sub 5} x M{sub 6}. (ii) Assuming the deformation parameter to be larger than the resolution parameter, by estimating the five SU(3) structure torsion (τ) classes W{sub 1,2,3,4,5} we verify that τ element of W{sub 5} in the large-r limit, implying the NKRWDC reduces to a warped Kahler deformed conifold. (iii) The local T{sup 3} of Dhuria and Misra (JHEP 1311:001, 2013) in the large-r limit satisfies the same conditions as the maximal T{sup 2}-invariant special Lagrangian three-cycle of T*S{sup 3} of Ionel and Min-OO (J Math 52(3), 2008), partly justifying use of SYZ-mirror symmetry in the ''delocalised limit'' of Becker et al. (Nucl Phys B 702:207, 2004) in Dhuria and Misra (JHEP 1311:001, 2013). In the second part of the paper, by either integrating out the angular coordinates of the non-compact four-cycle which a D7-brane wraps around, using the Ouyang embedding, in the DBI action of a D7-brane evaluated at infinite

  16. Biodiesel Production from Selected Microalgae Strains and Determination of its Properties and Combustion Specific Characteristics

    OpenAIRE

    Kokkinos, N.; A. Lazaridou; N. STAMATIS; Orfanidis, S.; A. Ch. Mitropoulos; A. Christoforidis; Nikolaou, N.

    2015-01-01

    Biofuels are gaining importance as significant substitutes for the depleting fossil fuels. Recent focus is on microalgae as the third generation feedstock. In the present research work, two indigenous fresh water and two marine Chlorophyte strains have been cultivated successfully under laboratory conditions using commercial fertilizer (Nutrileaf 30-10-10, initial concentration=70 g/m3 ) as nutrient source. Gas chromatographic analysis data showed that microalgae biodiesel obta...

  17. Effects of Modulating M3 Muscarinic Receptor Activity on Azoxymethane-Induced Liver Injury in Mice

    OpenAIRE

    2013-01-01

    Previously, we reported that azoxymethane (AOM)-induced liver injury is robustly exacerbated in M3 muscarinic receptor (M3R)-deficient mice. We used the same mouse model to test the hypothesis that selective pharmacological modulation of M3R activity regulates the liver injury response. Initial experiments confirmed that giving a selective M3R antagonist, darifenacin, to AOM-treated mice mimicked M3R gene ablation. Compared to vehicle controls, mice treated with the M3R antagonist had reduced...

  18. A newly isolated Pseudomonas putida S-1 strain for batch-mode-propanethiol degradation and continuous treatment of propanethiol-containing waste gas

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Dong-Zhi, E-mail: cdz@zjut.edu.cn [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Sun, Yi-Ming; Han, Li-Mei [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China); Chen, Jing [College of Food and Pharmacy, Zhejiang Ocean University, Zhoushan 316004 (China); Ye, Jie-Xu; Chen, Jian-Meng [College of Biological and Environmental Engineering, Zhejiang University of Technology, Hangzhou 310032 (China)

    2016-01-25

    Highlights: • A novel strain capable of effectively degrading 1-propanethiol (PT) was isolated. • Cells could be feasibly cultured in nutrition-rich media for PT degradation. • A possible pathway for PT degradation was proposed. • Pseudomonas putida S-1 could degrade mixed pollutants with diauxic growth. • Continuous removal of gaseous PT with or without isopropanol was demonstrated. - Abstract: Pseudomonas putida S-1 was isolated from activated sludge. This novel strain was capable of degrading malodorous 1-propanethiol (PT). PT degradation commenced with no lag phase by cells pre-grown in nutrition-rich media, such as Luria–Bertani (LB), and PT-contained mineral medium at specific growth rates of 0.10–0.19 h{sup −1}; this phenomenon indicated the operability of a large-scale cell culture. A possible PT degradation pathway was proposed on the basis of the detected metabolites, including dipropyl disulfide, 3-hexanone, 2-hexanone, 3-hexanol, 2-hexanol, S{sup 0}, SO{sub 4}{sup 2−}, and CO{sub 2}. P. putida S-1 could degrade mixed pollutants containing PT, diethyl disulfide, isopropyl alcohol, and acetaldehyde, and LB-pre-cultured cells underwent diauxic growth. Waste gas contaminated with 200–400 mg/m{sup 3} PT was continuously treated by P. putida S-1 pre-cultured in LB medium in a completely stirred tank reactor. The removal efficiencies exceeded 88% when PT stream was mixed with 200 mg/m{sup 3} isopropanol; by contrast, the removal efficiencies decreased to 60% as the empty bed residence time was shortened from 40 s to 20 s.

  19. 高顶压技术在莱钢1000m3高炉的应用%Application of High Top Pressure Technology in Laigang 1000 m3 Blast Furnace

    Institute of Scientific and Technical Information of China (English)

    王丰巧

    2015-01-01

    高压操作是强化高炉冶炼的一项重要措施,利于高炉炉况稳定顺行、提高煤气利用率,莱钢1000 m3高炉通过加强原料管理、增加鼓风动能、加强炉前管理等措施提高炉顶压力,取得了显著的经济效益。%High pressure operation is an important measure to strengthen the blast furnace smelting of blast furnace, can be conducive to the stable operation and the exploitation rate of gas.By improving raw material management, increasing the en-ergy of blast furnace, strengthening management measures to strengthen blast furnace top pressure, remarkable economic benefits has been achieved for Laigang 1000 m3 furnace.

  20. Exception Processing of Cortex-M3%Cortex-M3的异常处理机制研究

    Institute of Scientific and Technical Information of China (English)

    方安平; 蔡俊宇

    2009-01-01

    详细阐述Cortex-M3异常的分类、优先级、进入和退出,以及在Cortex-M3异常处理机制中使用的新技术--迟到(late-arriving)和尾链(tail-chaining);最后,比较Cortex-M3和ARM7异常控制机制的区别,并量化分析迟到和尾链技术在异常处理中的优越性.

  1. Time resolved studies of the addition reactions of silylenes and unsaturated hydrocarbons in the gas phase (an investigation of the strain energies of silirane and silirene rings)

    CERN Document Server

    Dormer, G

    1999-01-01

    This thesis reports the measurement of absolute rate constants for number of silylene addition reactions with unsaturated hydrocarbons. The reactions of SiH sub 2 , SiD sub 2 and Me sub 2 Si with alkene and alkynes were studied. The silylenes were formed, in situ, by the photolysis of an organosilicon precursor, and the rate constants obtained by the direct observation of the absorption decay of the silylene reactant. The reactions were studied in the gas phase and their temperature and pressure dependence investigated. The reaction of SiH sub 2 and 1,3-butadiene was investigated and found to be pressure dependent. The following Arrhenius equation was yielded at infinite pressure; log(k supinfinity/cm sup 3 molecule sup - sup 1 s sup - sup 1) = (-9.57 +- 0.05) + (3.22 +- 0.35) kJmol sup - sup 1 /RT ln 10. The reaction was found to proceed via a two-channel pathway, leading to the products vinylsilirane and silacyclopentane. RRKM modelling of the system was carried out and led to the calculation of the strain ...

  2. Comparison between theoretical and experimental results for energy states of two-dimensional electron gas in pseudomorphically strained InAs high-electron-mobility transistors

    Science.gov (United States)

    Nishio, Yui; Tange, Takahiro; Hirayama, Naomi; Iida, Tsutomu; Takanashi, Yoshifumi

    2014-01-01

    The energy states of a two-dimensional electron gas (2DEG) in high-electron-mobility transistors with a pseudomorphically strained InAs channel (PHEMTs) were analyzed rigorously using a recently established theory that takes into account the nonparabolicity of the conduction band of the channel layer. The sheet density of the 2DEG in InxGa1-xAs-PHEMTs and the drain I-V characteristics of those devices were calculated theoretically and compared with the density and characteristics obtained experimentally. Not only the calculated threshold voltage (VTH) but also the calculated transconductance agreed fairly well with the corresponding values obtained experimentally. When the effects of the compositions of the InxGa1-xAs subchannel layer in the composite channel and the channel layer on energy states of 2DEG were investigated in order to establish a guiding principle for a design of the channel structure in PHEMTs, it was found that VTH is determined by the effective conduction-band offset energy ΔEC between the InAlAs barrier and the channel layers.

  3. Research on sub-surface damage and its stress deformation in the process of large aperture and high diameter-to-thickness ratio TMT M3MP

    Science.gov (United States)

    Hu, Hai-xiang; Qi, Erhui; Cole, Glen; Hu, Hai-fei; Luo, Xiao; Zhang, Xue-jun

    2016-10-01

    Large flat mirrors play important roles in large aperture telescopes. However, they also introduce unpredictable problems. The surface errors created during manufacturing, testing, and supporting are all combined during measurement, thus making understanding difficult for diagnosis and treatment. Examining a high diameter-to-thickness ratio flat mirror, TMT M3MP, and its unexpected deformation during processing, we proposed a strain model of subsurface damage to explain the observed phenomenon. We designed a set of experiment, and checked the validity of our diagnosis. On that basis, we theoretical predicted the trend of this strain and its scale effect on Zerodur®, and checked the validity on another piece experimentally. This work guided the grinding-polishing process of M3MP, and will be used as reference for M3M processing as well.

  4. IFR safety tests M2 and M3 in TREAT: data and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, W R; Lo, R K; Bauer, T H; Froehle, P H; Helenberg, H W; Morman, J A; Stanford, G S; Wright, A E

    1985-06-01

    TREAT tests M2 and M3 were performed to obtain information on the characteristics of metal-alloy reactor fuel under slow transient overpower accident conditions, in particular, the margin to cladding breach and the axial self-extrusion of fuel within intact cladding. The tests used U-5Fs fuel pins irradiated to burnup levels of 0.3 at. %, 4.5 at. % and 7.9 at. %. Each pin was located in a separte flowtube and cooled by flowing sodium. In one test, a pin of each burnup was heated to incipient cladding breach. In the other, pins of the medium and high burnup levels wer heated to slightly beyond breach. Pre- and post-failure fuel motions were monitored by the fast-neutron hodoscope. The time and axial location of cladding breach were determined from the test-loop instrumentation. Computations of fuel extrusion and cladding failure are desribed. The models used in the computations include effects of retained fission gas expansion, vaporization of the sodium-bond annulus in low burnup fuel, and cladding-wall thinning by eutectic formation.

  5. 安钢10万m3威金斯气柜利用效率探讨与应用%Efficiency Analysis and Application of Anyang Iron and Steel 100 000 m3 Wiggins Gasholder

    Institute of Scientific and Technical Information of China (English)

    于海顺; 王志峰; 王祥凯; 张文杰; 赵卫兵

    2015-01-01

    As to the operating situation of Augang 100 000 Wiggins gas holder, this paper analyzes the efficiency factors of Wiggins gesholder, and puts forward improving weasuers, including establishing a liaision mechauism, adjusting part programs of micro oxygen analzer before gasholder in gasholder control system to improve the gas-holder efficiency.%针对安钢10万m3威金斯气柜运行现状,对影响威金斯气柜利用效率的因素进行了探讨,并提出了建立联络机制、调整气柜控制系统中气柜进口前微氧分析仪的部分程序等改进措施。采取有效措施后提高了气柜的利用效率。

  6. Modelling, Design, Growth and Characterization of Strain Balanced Quantum Cascade Lasers (3-11mum), grown by Gas Source Molecular Beam Epitaxy

    Science.gov (United States)

    Bandyopadhyay, Neelanjan

    Quantum Cascade Laser (QCL) is a compact room temperature (RT) source of mid-infrared radiation, which can be used for spectroscopic detection of trace amount of chemicals. The mid-infrared spectral range between (3-11 microm), has a dense array of absorption lines of numerous molecules, due to the presence of fundamental vibrational modes. The goal of this thesis can be subdivided into two parts. Firstly, short wavelength QCLs, emitting below 4microm, perform poorly at RT, due to inter-valley Gamma --- L carrier scattering, carrier escape to the continuum, heat removal from the core region at high power density corresponding to short wavelength operation, and large interface scattering due to highly strained materials. Secondly, it is desirable to have a single QCL based source emitting between 6-10microm, which be used to detect multiple molecules having their peak absorptions far apart, inside this spectral range. However, gain bandwidth of a single core QCL is relatively small, so laser emission cannot be tuned over a wide spectral range. This thesis describes the working principle of a QCL based on superlattice transport, rate equations, scattering mechanism, and waveguide design. The choice of the material system for this work and the fundamentals of band structure engineering has been derived. Gas source molecular beam epitaxy - growth optimization and characterization is one of the most important features of this work, especially for short wavelength QCLs, and has been explained in depth. Different strategies for design of active region design of short wavelength QCL and heterogeneous broadband QCL has been explored. The major milestones, of this research was the world's first watt level continuous wave (CW), RT demonstration at 3.76 microm, which was followed by another milestone of the first CW, RT demonstration at 3.39microm and 3.55microm, and finally the elusive result of QCL emitting at CW, RT at a wavelength as short as lambda ~3microm, a record. In

  7. Different Characteristics of the Bright Branches of the Globular Clusters M3 and M13

    CERN Document Server

    Cho, D H; Jeon, Y B; Sim, K J; Cho, Dong-Hwan; Lee, Sang-Gak; Jeon, Young-Beom; Sim, Kyung Jin

    2005-01-01

    We carried out wide-field BVI CCD photometric observations of the GCs M3 and M13 using the BOAO 1.8 m telescope equipped with a 2K CCD. We present CMDs of M3 and M13. We have found AGB bumps at V = 14.85 for M3 at V = 14.25 for M13. It is found that AGB stars in M3 are more concentrated near the bump, while those in M13 are scattered along the AGB sequence. We identified the RGB bump of M3 at V = 15.50 and that of M13 at V = 14.80. We have estimated the ratios R and R2 for M3 and M13 and found that of R for M3 is larger than that for M13 while R2's for M3 and M13 are similar when only normal HB stars are used in R and R2 for M13. However, we found that R's for M3 and M13 are similar while R2 for M3 is larger than that for M13 when all the HB stars are included in R and R2 for M13. We have compared the observed RGB LFs of M3 and M13 with the theoretical RGB LF of Bergbusch & VandenBerg at the same radial distances from the cluster centers as used in R and R2 for M3 and M13. We found "extra stars" belonging...

  8. Second Parameter Effects in and between M3 and Palomar 3

    CERN Document Server

    Catelan, M; Ferraro, F R

    2001-01-01

    We study the globular clusters M3 and Palomar 3 as a "second parameter (2ndP) pair," showing that: i) M3 has a surprisingly strong *internal* 2ndP; ii) The dispersion in mass on the Pal 3 horizontal branch (HB) is intrinsically very small, leading to the most apparent differences in HB morphology between M3 and Pal 3; iii) Ignoring the difference in HB mass dispersion between M3 and Pal 3, their relative HB types can be accounted for by a fairly small difference in age, of order 0.5-1 Gyr.

  9. Design Essentials of 80 m3 Diluted Acetaldehyde Storage Tank%浅谈80 m3稀乙醛储槽设计要点

    Institute of Scientific and Technical Information of China (English)

    白春山; 刘文元

    2009-01-01

    Combination 80 m3 thin acetaldehyde tank design, the paper focused on low-pressure tank-top cans bearing ring, tank walls, tank top and anchor set design and the method of calculating and comparing the general design of storage tanks were introduced.%结合80 m3稀乙醛储槽的设计,着重介绍低压储罐罐顶承压环、罐壁、罐顶以及锚栓设置的设计及其计算方法,并与一般储罐设计进行比较.

  10. Effects of Modulating M3 Muscarinic Receptor Activity on Azoxymethane-Induced Liver Injury in Mice

    Science.gov (United States)

    Khurana, Sandeep; Jadeja, Ravirajsinh; Twadell, William; Cheng, Kunrong; Rachakonda, Vikrant; Saxena, Neeraj; Raufman, Jean-Pierre

    2013-01-01

    Previously, we reported that azoxymethane (AOM)-induced liver injury is robustly exacerbated in M3 muscarinic receptor (M3R)-deficient mice. We used the same mouse model to test the hypothesis that selective pharmacological modulation of M3R activity regulates the liver injury response. Initial experiments confirmed that giving a selective M3R antagonist, darifenacin, to AOM-treated mice mimicked M3R gene ablation. Compared to vehicle controls, mice treated with the M3R antagonist had reduced survival and increased liver nodularity and fibrosis. We next assessed AOM-induced liver injury in mice treated with a selective M3R agonist, pilocarpine. After pilocarpine treatment, stimulation of post-M3R signaling in the liver was evidenced by ERK and AKT activation. In contrast to the damaging effects of the M3R antagonist, administering pilocarpine to AOM-treated mice significantly attenuated hepatic stellate cell activation, collagen deposition, bile ductule proliferation, and liver fibrosis and nodularity. As anticipated from these findings, livers from pilocarpine-treated mice exhibited reduced expression of key players in fibrosis (α1 collagen, α-smooth muscle actin, TGF-β1, PGDF, TGF-β1R, PGDFR) and decreased mRNA levels for molecules that regulate extracellular matrix formation (TIMP-1, TIMP-2, MMP-2, MMP-13). Cleaved caspase-3, nitrotyrosine and BrdU immunostaining provided evidence that pilocarpine treatment reduced hepatocyte apoptosis and oxidative stress, while increasing hepatocyte proliferation. Collectively, these findings identify several downstream mechanisms whereby M3R activation ameliorates toxic liver injury. These novel observations provide a proof-of-principle that selectively stimulating M3R activation to prevent or diminish liver injury is a therapeutic strategy worthy of further investigation. PMID:23707755

  11. Scale-up of industrial biodiesel production to 40 m3using a liquid lipase formulation

    DEFF Research Database (Denmark)

    Price, Jason; Nordblad, Mathias; Martel, Hannah H.

    2016-01-01

    In this work, we demonstrate the scale-up from an 80 L fed-batch scale to 40 m3 along with the design of a 4 m3continuous process for enzymatic biodiesel production catalysed by NS-40116 (a liquid formulation of a modified Thermomyces lanuginosus lipase). Based on the analysis of actual pilot pla...

  12. σ-Aromatic cyclic M3(+) (M = Cu, Ag, Au) clusters and their complexation with dimethyl imidazol-2-ylidene, pyridine, isoxazole, furan, noble gases and carbon monoxide.

    Science.gov (United States)

    Pan, Sudip; Saha, Ranajit; Mandal, Subhajit; Chattaraj, Pratim K

    2016-04-28

    The σ-aromaticity of M3(+) (M = Cu, Ag, Au) is analyzed and compared with that of Li3(+) and a prototype σ-aromatic system, H3(+). Ligands (L) like dimethyl imidazol-2-ylidene, pyridine, isoxazole and furan are employed to stabilize these monocationic M3(+) clusters. They all bind M3(+) with favorable interaction energy. Dimethyl imidazol-2-ylidene forms the strongest bond with M3(+) followed by pyridine, isoxazole and furan. Electrostatic contribution is considerably more than that of orbital contribution in these M-L bonds. The orbital interaction arises from both L → M σ donation and L ← M back donation. M3(+) clusters also bind noble gas atoms and carbon monoxide effectively. In general, among the studied systems Au3(+) binds a given L most strongly followed by Cu3(+) and Ag3(+). Computation of the nucleus-independent chemical shift (NICS) and its different extensions like the NICS-rate and NICS in-plane component vs. NICS out-of-plane component shows that the σ-aromaticity in L bound M3(+) increases compared to that of bare clusters. The aromaticity in pyridine, isoxazole and furan bound Au3(+) complexes is quite comparable with that in the recently synthesized Zn3(C5(CH3)5)3(+). The energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital also increases upon binding with L. The blue-shift and red-shift in the C-O stretching frequency of M3(CO)3(+) and M3(OC)3(+), respectively, are analyzed through reverse polarization of the σ- and π-orbitals of CO as well as the relative amount of OC → M σ donation and M → CO π back donation. The electron density analysis is also performed to gain further insight into the nature of interaction.

  13. On M3-transition rates in selected odd-mass nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Lombard, R.J. E-mail: lombard@ipno.in2p3.fr; Vdovin, A.I.; Shirikova, N.Yu.; Sushkov, A.V

    2003-06-02

    The reduced probabilities of M3 transitions are studied in five deformed and three spherical or near-spherical odd-mass nuclei. In deformed nuclei, the states linked by M3 transitions are predominantly of single-quasiparticle nature and the calculations are performed taking into account the single-quasiparticle as well as core-polarization terms in the M3-operator. Whereas in {sup 159}Ho, {sup 175}Yb, and {sup 179}Hf the ratio between theoretical and experimental B(M3) values range from 0.5 to 1.4, the situation is much worse in neutron deficient nuclides {sup 179}W and {sup 183}Pt where the theory used can not explain a very sharp drop of the B(M3) values. In the soft nuclei {sup 121}Cs and {sup 207}Po the states connected by M3 transitions are treated as 'quasiparticle x phonon' states. In {sup 113}Sn, the small 'quasiparticle x phonon' components are not sufficient to compensate vanishing contribution of the dominant quasiparticle component, which shares {delta}l forbidden transitions. Thus, on the whole theoretical description of B(M3) with the present simple models seems to be unsatisfactory. It constitutes a challenging problem both at the level of the nuclear structure and the transition operator.

  14. LHCB RICH gas system proposal

    CERN Document Server

    Bosteels, Michel; Haider, S

    2001-01-01

    Both LHCb RICH will be operated with fluorocarbon as gas radiator. RICH 1 will be filled with 4m^3 of C4F10 and RICH 2 with 100m^3 of CF4. The gas systems will run as a closed loop circulation and a gas recovery system within the closed loop is planned for RICH 1, where the recovery of the CF4 will only be realised during filling and emptying of the detector. Inline gas purification is foreseen for the gas systems in order to limit water and oxygen impurities.

  15. Elements in the canine distemper virus M 3' UTR contribute to control of replication efficiency and virulence.

    Directory of Open Access Journals (Sweden)

    Danielle E Anderson

    Full Text Available Canine distemper virus (CDV is a negative-sense, single-stranded RNA virus within the genus Morbillivirus and the family Paramyxoviridae. The Morbillivirus genome is composed of six transcriptional units that are separated by untranslated regions (UTRs, which are relatively uniform in length, with the exception of the UTR between the matrix (M and fusion (F genes. This UTR is at least three times longer and in the case of CDV also highly variable. Exchange of the M-F region between different CDV strains did not affect virulence or disease phenotype, demonstrating that this region is functionally interchangeable. Viruses carrying the deletions in the M 3' UTR replicated more efficiently, which correlated with a reduction of virulence, suggesting that overall length as well as specific sequence motifs distributed throughout the region contribute to virulence.

  16. COOLING METHOD OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

    Directory of Open Access Journals (Sweden)

    V. Yu. Stecenko

    2013-01-01

    Full Text Available The way of cooling of castings from silumin AK15M3 is developed at the vertical centrifugal casting, enabling to receive bimetallic blanks with high-disperse eutectic and hypereutectic microstructures and minimal allowance for machining.

  17. Complete Genome Sequence of the Novel Leech Symbiont Mucinivorans hirudinis M3T

    OpenAIRE

    Nelson, Michael C.; Bomar, Lindsey; Graf, Joerg

    2015-01-01

    Mucinivorans hirudinis M3T was isolated from the digestive tract of the medicinal leech, Hirudo verbana, and is the type species of a new genus within the Rikenellaceae. Here, we report the complete annotated genome sequence of this bacterium.

  18. Complete Genome Sequence of the Novel Leech Symbiont Mucinivorans hirudinis M3T.

    Science.gov (United States)

    Nelson, Michael C; Bomar, Lindsey; Graf, Joerg

    2015-02-05

    Mucinivorans hirudinis M3(T) was isolated from the digestive tract of the medicinal leech, Hirudo verbana, and is the type species of a new genus within the Rikenellaceae. Here, we report the complete annotated genome sequence of this bacterium.

  19. Posttranslational modifications of human M3 muscarinic acetylcholine receptor: zooming in its functional implications

    OpenAIRE

    Romero Fernández, Wilber

    2011-01-01

    The human M3 muscarinic acetylcholine receptor (M3R) regulates many important physiological roles in the central and peripheral nervous systems, and it is involved in the pathophysiology of several neurodegenerative and autoimmune diseases, representing attractive potential pharmacological target for intervention. However, the lack of structural information on this receptor hampered the development of new potent antagonist with increased selectivity and lower side effects. Such structural inf...

  20. M3B: A coarse grain model for the simulation of oligosaccharides and their water mixtures.

    Science.gov (United States)

    Goddard, William A.; Cagin, Tahir; Molinero, Valeria

    2003-03-01

    Water and sugar dynamics in concentrated carbohydrate solutions is of utmost importance in food and pharmaceutical technology. Water diffusion in concentrated sugar mixtures can be slowed down many orders of magnitude with respect to bulk water [1], making extremely expensive the simulation of these systems with atomistic detail for the required time-scales. We present a coarse grain model (M3B) for malto-oligosaccharides and their water mixtures. M3B speeds up molecular dynamics simulations about 500-1000 times with respect to the atomistic model while retaining enough detail to be mapped back to the atomistic structures with low uncertainty in the positions. The former characteristic allows the study of water and carbohydrate dynamics in supercooled and polydisperse mixtures with characteristic time scales above the nanosecond. The latter makes M3B well suited for combined atomistic-mesoscale simulations. We present the parameterization of M3B force field for water and a family of technologically relevant glucose oligosaccharides, the alpha-(1->4) glucans. The coarse grain force field is completely parameterized from atomistic simulations to reproduce the density, cohesive energy and structural parameters of amorphous sugars. We will show that M3B is capable to describe the helical character of the higher oligosaccharides, and that the water structure in low moisture mixtures shows the same features obtained with the atomistic and M3B models. [1] R Parker, SG Ring: Carbohydr. Res. 273 (1995) 147-55.

  1. Theoretical study of neutral and charged Sc{sub n{<=}2}-(benzene){sub m{<=}3} clusters

    Energy Technology Data Exchange (ETDEWEB)

    Maynez-Rojas, Miguel; Castro, Miguel, E-mail: castro@quetzal.pquim.unam.mx [Universidad Nacional Autonoma de Mexico, Departamento de Fisica y Quimica Teorica, DEPg. Facultad de Quimica (Mexico)

    2013-01-15

    Interactions of benzene molecules with scandium atoms, Sc{sub n{<=}2}-(C{sub 6}H{sub 6}){sub m{<=}3}, in the gas phase were studied by means of density functional theory. All-electron calculations were performed using the B3LYP hybrid functional in concert with 6-311+G(d,p) orbital basis sets for the Sc, C, and H atoms. Multiple-decker sandwich (MDS) structures are identified as the ground states for Sc{sub n{<=}2}-(C{sub 6}H{sub 6}){sub m{<=}3}, where the ligands are attached to the metal through Sc-C bonding, formed between the 3d electrons and the {pi}-clouds of the benzene rings. Significant distortion is produced on the absorbed benzene molecules by the metal-ligand bonding. Rice ball structures also appeared, but they were found at higher energies, in such a way that essentially MDS isomers may emerge in the molecular beams. Even the low number of valence electrons (3d{sup 2}4s{sup 1}) of the Sc atom; sextuple coordinations are formed, but they show different Sc-C bond lengths, diminishing the symmetry of neutral and charged clusters. The estimated ionization energies, in near agreement with experimental data, and electron affinities, suggest delocalization of the valence electrons through the network of 3d-{pi} bonds of Sc{sub 1,2}-(C{sub 6}H{sub 6}){sub m{<=}3}. The binding energies decrease with the absorption of more benzene molecules, and in some cases increase as more metal atoms are added to the cluster.

  2. New M+, M3+-arsenates – the framework structures of AgM3+(HAsO42 (M3+ = Al, Ga and M+GaAs2O7 (M+ = Na, Ag

    Directory of Open Access Journals (Sweden)

    Karolina Schwendtner

    2017-05-01

    Full Text Available The crystal structures of hydrothermally synthesized silver(I aluminium bis[hydrogen arsenate(V], AgAl(HAsO42, silver(I gallium bis[hydrogen arsenate(V], AgGa(HAsO42, silver gallium diarsenate(V, AgGaAs2O7, and sodium gallium diarsenate(V, NaGaAs2O7, were determined from single-crystal X-ray diffraction data collected at room temperature. The first two compounds are representatives of the MCV-3 structure type known for KSc(HAsO42, which is characterized by a three-dimensional anionic framework of corner-sharing alternating M3+O6 octahedra (M = Al, Ga and singly protonated AsO4 tetrahedra. Intersecting channels parallel to [101] and [110] host the Ag+ cations, which are positionally disordered in the Ga compound, but not in the Al compound. The hydrogen bonds are relatively strong, with O...O donor–acceptor distances of 2.6262 (17 and 2.6240 (19 Å for the Al and Ga compounds, respectively. The two diarsenate compounds are representatives of the NaAlAs2O7 structure type, characterized by an anionic framework topology built of M3+O6 octahedra (M = Al, Ga sharing corners with diarsenate groups, and M+ cations (M = Ag hosted in the voids of the framework. Both structures are characterized by a staggered conformation of the As2O7 groups.

  3. 3 800 m3耙吸挖泥船的HVAC设计%HVAC design for a 3 800 m3 trailing suction dredger

    Institute of Scientific and Technical Information of China (English)

    戴菁; 赵骊; 陈维茂

    2007-01-01

    挖泥船的需求量与日俱增,逐渐形成系列船型.通过介绍3 800 m3耙吸挖泥船的HVAC设计系统,与以往挖泥船型比较,以及用户的评价,指出该船的空调系统设计思想和方法上的优点,为后续船提供了有益的参考.

  4. Muscarinic M3 receptors on structural cells regulate cigarette smoke-induced neutrophilic airway inflammation in mice

    NARCIS (Netherlands)

    Kistemaker, Loes E.M.; van Os, Ronald P.; Dethmers-Ausema, Albertina; Bos, I. Sophie T.; Hylkema, Machteld N.; van den Berge, Maarten; Hiemstra, Pieter S; Wess, Jürgen; Meurs, Herman; Kerstjens, Huib A.M.; Gosens, Reinoud

    2015-01-01

    Anticholinergics, blocking the muscarinic M-3 receptor, are effective bronchodilators for patients with chronic obstructive pulmonary disease. Recent evidence from M-3 receptor-deficient mice (M3R-/-) indicates that M-3 receptors also regulate neutrophilic inflammation in response to cigarette smoke

  5. Modeling of High-Strain-Rate Deformation, Fracture, and Impact Behavior of Advanced Gas Turbine Engine Materials at Low and Elevated Temperatures

    Science.gov (United States)

    Shazly, Mostafa; Nathenson, David; Prakash, Vikas

    2003-01-01

    Gamma titanium aluminides have received considerable attention over the last decade. These alloys are known to have low density, good high temperature strength retention, and good oxidation and corrosion resistance. However, poor ductility and low fracture toughness have been the key limiting factors in the full utilization of these alloys. More recently, Gamma-met PX has been developed by GKSS, Germany. These alloys have been observed to have superior strengths at elevated temperatures and quasi-static deformation rates and good oxidation resistance at elevated temperatures when compared with other gamma titanium aluminides. The present paper discusses results of a study to understand dynamic response of gamma-met PX in uniaxial compression. The experiments were conducted by using a modified split Hopkinson pressure bar between room temperature and 900 C and strain rates of up to 3500 per second. The Gamma met PX alloy showed superior strength when compared to nickel based superalloys and other gamma titanium aluminides at all test temperatures. It also showed strain and strain-rate hardening at all levels of strain rates and temperatures and without yield anomaly up to 900 C. After approximately 600 C, thermal softening is observed at all strain rates with the rate of thermal softening increasing dramatically between 800 and 900 C. However, these flow stress levels are comparatively higher in Gamma met PX than those observed for other TiAl alloys.

  6. Design of USB smart card reader based on Cortex-M3%基于Cortex-M3的智能卡USB读卡器设计

    Institute of Scientific and Technical Information of China (English)

    李冬霞; 张雪庆

    2010-01-01

    为了提高智能卡系统的通信速度和中断响应速度,设计了基于Cortex-M3和USB接口的智能卡读卡器系统.设计中采用具有ARM Cortex-M3内核的STM32F103R6T6等芯片进行相关的硬件设计,分别使用Keil和Visual C++6.0进行读卡器固件子系统程序和PC端子系统驱动程序开发,在此基础上,专门设计了测试程序用于测试系统的正确性和有效性.实验结果表明,该智能卡读卡器系统可实现计算机与智能卡的准确,高效通信.

  7. Renovation of stirring system in 300m3 L-lysine fermentor%300m3赖氨酸发酵罐搅拌系统改造

    Institute of Scientific and Technical Information of China (English)

    王远海

    2012-01-01

    以加强传质混合为目的提出300m3赖氨酸发酵罐搅拌系统改造方案,采用计算流体力学(CFD)数值模拟方法分析了搅拌系统轴功率、流型、传质混合能力,成功指导了搅拌系统改造,在电流增大的情况下,平均单罐产量提高2.44t,平均糖酸转化率提高约1个百分点.%To strengthen mass transfer and mixing for purpose, the reform scheme of stirring system in 300m3 L-lysine fermentor was proposed, CFD (Computational Fluid Dynamics) numerical simulation was used in analysing shaft power, flow pattern, mass transfer mixing ability of the stirring system, when current increased, the fermentation yield and L-lysine acid conversion rate of sugar was 2.44t and about 1% higher than the fermentor which not renovated.

  8. M3-receptor activation counteracts opioid-mediated apneusis, but the apneusis per se is not necessarily related to an impaired M3 mechanism in rats.

    Science.gov (United States)

    Niwa, Yuka; Haji, Akira

    2011-11-07

    Morphine slows the respiratory cycle due to a predominant prolongation of inspiration (apneusis) by postponing the spontaneous termination of inspiration (inspiratory off-switching). The present study investigates whether the morphine-induced apneusis results from impairment of cholinergic mechanisms in the central respiratory network. The efferent discharge was recorded from the phrenic nerve in artificially ventilated and anesthetized rats with vagotomy. All drugs were injected intravenously. The phrenic nerve displayed an augmenting discharge during inspiration and arrest of discharge during expiration in normal condition. Administration of morphine (0.3-10.0mg/kg) dose-dependently provoked apneusis characterized by a long-lasting, plateau inspiratory discharge of the phrenic nerve. It shortened the expiratory duration. Subsequent administration of physostigmine (0.1mg/kg) restored the morphine-induced apneusis to eupnea with a partial recovery of the augmenting inspiratory discharge. This modification of physostigmine was blocked by a non-specific muscarinic antagonist scopolamine (3.0mg/kg), leading to re-prolongation of inspiration. A similar antagonism was affected by an antagonist of M3 cholinergic receptors, 4-diphenylacetoxy-N-methylpiperidine methiodide (4-DAMP, 1.0 and 10.0mg/kg) but not by an antagonist of M1 cholinergic receptors, pirenzepine (1.0 and 10.0mg/kg). These results demonstrate that the activation of endogenous M3 cholinergic mechanisms counteracts the morphine-induced apneusis. Copyright © 2011 Elsevier Inc. All rights reserved.

  9. Characterizations of purple non-sulfur bacteria isolated from paddy fields, and identification of strains with potential for plant growth-promotion, greenhouse gas mitigation and heavy metal bioremediation.

    Science.gov (United States)

    Sakpirom, Jakkapan; Kantachote, Duangporn; Nunkaew, Tomorn; Khan, Eakalak

    2017-04-01

    This study was aimed at selecting purple non-sulfur bacteria (PNSB) isolated from various paddy fields, including Cd- and Zn-contaminated paddy fields, based on their biofertilizer properties. Among 235 PNSB isolates, strain TN110 was most effective in plant growth-promoting substance (PGPS) production, releasing 3.2 mg/L of [Formula: see text] , 4.11 mg/L of 5-aminolevulinic acid (ALA) and 3.62 mg/L of indole-3-acetic acid (IAA), and reducing methane emission up to 80%. This strain had nifH, vnfG and anfG, which are the Mo, V and Fe nitrogenase genes encoded for key enzymes in nitrogen fixation under different conditions. This strain provided 84% and 55% removal of Cd and Zn, respectively. Another isolate, TN414, not only produced PGPS (1.30 mg/L of [Formula: see text] , 0.94 mg/L of ALA and 0.65 mg/L of IAA), but was also efficient in removing both Cd and Zn at 72% and 74%, respectively. Based on 16S rDNA sequencing, strain TN110 was identified as Rhodopseudomonas palustris, while strain TN414 was Rubrivivax gelatinosus. A combination of TN110 and TN414 could potentially provide a biofertilizer, which is a greener alternative to commercial/chemical fertilizers and an agent for bioremediation of heavy metals and greenhouse gas mitigation in paddy fields. Copyright © 2016 Institut Pasteur. All rights reserved.

  10. The application of pentaprism scanning technology on the manufacturing of M3MP

    Science.gov (United States)

    Qi, Erhui; Hu, Haixiang; Hu, Haifei; Cole, Glen; Luo, Xiao; Ford, Virginia; Zhang, Xuejun

    2016-10-01

    The PSS (pentaprism scanning system) has advantages of simple structure, needless of reference flat, be able of on-site testing, etc, it plays an important role in large flat reflective mirror's manufacturing, especially the high accuracy testing of low order aberrations. The PSS system measures directly the slope information of the tested flat surface. Aimed at the unique requirement of M3MP, which is the prototype mirror of the tertiary mirror in TMT (Thirty Meter Telescope) project, this paper analyzed the slope distribution of low order aberrations, power and astigmatism, which is very important in the manufacturing process of M3MP. Then the sample route lines of PSS are reorganized and new data process algorism is implemented. All this work is done to improve PSS's measure sensitivity of power and astigmatism, for guiding the manufacturing process of M3MP.

  11. Muscarinic M3 receptor subtype gene expression in the human heart.

    Science.gov (United States)

    Hellgren, I; Mustafa, A; Riazi, M; Suliman, I; Sylvén, C; Adem, A

    2000-01-20

    The heart is an important target organ for cholinergic function. In this study, muscarinic receptor subtype(s) in the human heart were determined using reverse transcription-polymerase chain reaction. Our results demonstrated muscarinic receptor M2 and M3 subtype RNA in left/right atria/ventricles of donor hearts. Receptor autoradiography analysis using selective muscarinic ligands indicated an absence of M1 receptor subtype in the human heart. The level of muscarinic receptor binding in atria was two to three times greater than in ventricles. Our results suggest that muscarinic receptors in the human heart are of the M2 and M3 subtypes. This is the first report of M3 receptors in the human myocardium.

  12. M3 User's Manual. Version 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Skaarman, Erik (Abscondo Utveckling, Bromma (Sweden)); Gomez, Javier B. (Univ. of Zaragoza (Spain). Geochemical modelling Group); Gurban, Ioana (3D Terra (Canada))

    2006-07-15

    This report describes the Multivariate Mixing and Mass balance calculations (M3). This new method and computer code is developed to trace the mixing and reaction processes in the groundwater. The aim of the M3 concept is to decode the often hidden and complex information gathered in the groundwater analytical data. The manual presents shortly the theory and practice behind the M3 method. The M3 computer code is also presented and emphasis is put on the reference manual. This includes detailed reference to the M3 program's abilities and limitations, installation procedures and all functions and operations that the program can perform. It also describes sample cases of how the program is used to analyse a test data set. This guide is part of the Help Files distributed together with M3. Two accompanying reports cover other aspects: - Concepts, Methods, and Mathematical Formulation, gives a complete description of the mathematical framework of M3 and introduces concepts and methods useful for the end user. - M3 version 3.0: Verification and Validation, gathers a collection of validation and verification exercises, designed to test each part of M3 code and to build confidence in its methodology. The M3 method has been tested and modified over several years. The development work has been supported by the Swedish Nuclear Fuel and Waste Management Company (SKB). The main test site for the model was the underground Aespoe Hard Rock Laboratory (HRL). The examples used in this manual are from a Aespoe international groundwater modelling co-operation project where one of the tools used was M3. The M3 concept has been applied on the data from SKB's site investigation programme and in data from Canada, Japan, Jordan, Gabon and Finland. The groundwater composition is a result of mixing processes and water-rock interaction. Standard groundwater models based on thermodynamic laws may not be applicable in a normal temperature groundwater system where equilibrium with many

  13. A Discussion of the High Energy Density Primary Battery Employed in the FOTON M3 Mission

    Science.gov (United States)

    Bennetti, A.; Reece, D.; Spurrett, R.; Schautz, M.; Green, K.

    2008-09-01

    In 2005, ABSL Space Products (ABSL) was contracted by QinetiQ to deliver the lithium sulfuryl chloride primary battery system for the FOTON M3 ESA (European Space Agency) mission. FOTON M3 was led by the ESA Directorate of Human Spaceflight & Exploration and carried a number of materials science, fluid physics and biology experiments as well as technology demonstration payloads. A number of the experiments required a very high energy density primary battery power source. This battery was manufactured by ABSL, and the mission was successfully completed in September 2007 following a twelve days orbiting in Low Earth Orbit (LEO).

  14. Development of RT-components for the M-3 Strawberry Harvesting Robot

    Science.gov (United States)

    Yamashita, Tomoki; Tanaka, Motomasa; Yamamoto, Satoshi; Hayashi, Shigehiko; Saito, Sadafumi; Sugano, Shigeki

    We are now developing the strawberry harvest robot called “M-3” prototype robot system under the 4th urgent project of MAFF. In order to develop the control software of the M-3 robot more efficiently, we innovated the RT-middleware “OpenRTM-aist” software platform. In this system, we developed 9 kind of RT-Components (RTC): Robot task sequence player RTC, Proxy RTC for image processing software, DC motor controller RTC, Arm kinematics RTC, and so on. In this paper, we discuss advantages of RT-middleware developing system and problems about operating the RTC-configured robotic system by end-users.

  15. Underground low flux neutron background measurements in LSM using a large volume (1m3) spherical proportional counter

    Science.gov (United States)

    Savvidis, I.; Giomataris, I.; Bougamont, E.; Irastorza, I.; Aune, S.; Chapelier, M.; Charvin, P. H.; Colas, P.; Derre, J.; Ferrer, E.; Gerbier, G.; Gros, M.; Mangier, P.; Navick, X. F.; Salin, P.; Vergados, J. D.; Zampalo, M.

    2010-01-01

    A large volume (1m3) spherical proportional counter has been developed at CEA/Saclay, for low flux neutron measurements. The high voltage is applied to a small sphere 15mm in diameter, located in the center of the counter and the wall of the counter is grounded. Neutrons can be measured successfully, with high sensitivity, using 3He gas in the detector. The proton and tritium energy deposition in the drift gaseous volume, from the reaction 3He(n,p)3H, can provide the neutron spectra from thermal neutrons up to several MeV. The detector has been installed in the underground laboratory in Modane (LSM) to measure the neutron background. The sphere has been has been filled with gas mixture of Ar + 2% CH4 +3gr He-3, at 275 mbar. The thermal neutron peak is well separated from the cosmic ray and gamma background, permitting of neutron flux calculation. Other potential applications requiring large volume of about 10 m in radius are described in detail in reference

  16. The WA105-3x1x1 m3 dual phase LAr-TPC demonstrator

    CERN Document Server

    Murphy, Sebastien

    2016-11-15

    The dual phase Liquid Argon Time Projection Chamber (LAr TPC) is the state-of-art technology for neutrino detection thanks to its superb 3D tracking and calorimetry performance. Its main feature is the charge amplification in gas argon which provides excellent signal-to-noise ratio. Electrons produced in the liquid argon are extracted in the gas phase. Here, a readout plane based on Large Electron Multiplier detectors provides amplification of the charges before its collection onto an anode with strip readout. The charge amplification enables constructing fully homoge- nous giant LAr-TPCs with tuneable gain, excellent charge imaging performance and increased sensitivity to low energy events. Following a staged approach the WA105 collaboration is con- structing a dual phase LAr-TPC with an active volume of 3x1x1m3 that will soon be tested with cosmic rays. Its construction and operation aims to test scalable solutions for the crucial aspects of this technology: ultra high argon purity in non-evacuable tank, la...

  17. Regulatory gene mutation: a driving force behind group a Streptococcus strain- and serotype-specific variation.

    Science.gov (United States)

    Sarkar, Poulomee; Sumby, Paul

    2017-02-01

    Data from multiple bacterial pathogens are consistent with regulator-encoding genes having higher mutation frequencies than the genome average. Such mutations drive both strain- and type- (e.g., serotype, haplotype) specific phenotypic heterogeneity, and may challenge public health due to the potential of variants to circumvent established treatment and/or preventative regimes. Here, using the human bacterial pathogen the group A Streptococcus (GAS; S. pyogenes) as a model organism, we review the types and regulatory-, phenotypic-, and disease-specific consequences of naturally occurring regulatory gene mutations. Strain-specific regulator mutations that will be discussed include examples that transform isolates into hyper-invasive forms by enhancing expression of immunomodulatory virulence factors, and examples that promote asymptomatic carriage of the organism. The discussion of serotype-specific regulator mutations focuses on serotype M3 GAS isolates, and how the identified rewiring of regulatory networks in this serotype may be contributing to a decades old epidemiological association of M3 isolates with particularly severe invasive infections. We conclude that mutation plays an outsized role in GAS pathogenesis and has clinical relevance. Given the phenotypic variability associated with regulatory gene mutations, the rapid examination of these genes in infecting isolates may inform with respect to potential patient complications and treatment options.

  18. 1500 m3立式圆筒形煤仓有限元计算%Finite Element Calculation of 1 500 m3 Vertical Cylindrical Bunker

    Institute of Scientific and Technical Information of China (English)

    汪志福; 陶保林; 孙文红

    2015-01-01

    Large cylindrical bunker is widely used in oil fired steam injection station project.An analysis of stress strength for the design of a 1 500 m3 vertical cylindrical bunker is given.A large general finite element software ANSYS is used to establish a actual size of the finite element nu-merical model,which connected with a coal bunker tank top,tank walls,bearing,cone bottom, consistent with steel support columns,using powerful border simulation and all kinds of applied load function,in a state filled with water + wind + snow + load cases,to calculate and check the various structural parts of coal bunker.The calculated results show that it has sufficient safe-ty margin and reliability.%大型圆筒式煤仓在油田燃煤注汽站工程中应用广泛,对某1500 m3立式圆筒形煤仓进行了应力强度分析。运用有限元软件 ANSYS 建立了与煤仓罐顶、罐壁、支座连接、锥底、支撑钢架以及立柱实际尺寸相一致的有限元数值计算模型,利用软件的边界模拟和各种荷载施加功能,针对煤仓各结构部分,在充水状态+风载荷+雪载荷+地震载荷工况下进行了应力计算和校核,结果表明,此煤仓具有足够的安全裕度及可靠性。

  19. HST UV Observations of the Cores of M3 and M13

    CERN Document Server

    Ferraro, F R; Pecci, F F; Cacciari, C; Dorman, B; Rood, R T; Ferraro, Francesco R.; Paltrinieri, Barbara; Pecci, Flavio Fusi; Cacciari, Carla; Dorman, Ben; Rood, Robert T.

    1997-01-01

    We present preliminary results from HST/WFPC2 observations of the central regions of the of the Galactic globular clusters M13 and M3. The clusters are almost identical in most respects including chemical composition, but there are dramatic differences in both the horizontal branch (HB) and blue straggler (BSS) populations. The M13 HB has a long blue tail extending 4.5 mag in V, reaching well below the level of the main sequence turn-off. M3 has no such feature. M3 and M13 are thus an extreme case of the ``second parameter problem'' in HB morphology. Also present in the M13 HB are two gaps similar to those seen in the clusters NGC 6752 and NGC 2808. M3 has a specific frequency of BSS three times larger than that of M13. Our results imply that neither age nor cluster density, two popular second parameter candidates, are likely to be responsible for the observed differences.

  20. Experimental Conditions: SE37_S16_M3_D1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available opes SE37_S16 Blank (80% methanol) SE37_S16_M3 0mg [MassBase ID] MDLC1_43486 SE37_MS1 Metabolites extraction... with 80% methanol and analysis by LC-Orbitrap-MS SE37_DS1 Peak extraction for unlabeled data ...

  1. On the Family of Thue Equation |x3 + mx2y- (m + 3) xy2 + y3 |= k

    Institute of Scientific and Technical Information of China (English)

    XIA Jingbo; CHEN Jianhua; ZHANG Silan

    2006-01-01

    The family of cubic Thue equation which depend on two parameters | x3 + mx2 y- (m+3) xy2 + y3|=k is studied. Using rational approximation, we give a smaller upper bound of the solution of the equation, that is quite better than the present result. Moreover, we study two inequalities |x3 +mx2y- (m+3)xy2 +y3|=k≤2m+3 and |m3 +mm2y- (m+3)my2 + y3 | = k≤(2m+ 3)2 separately. Our result of upper bound make it easy to solve those inequalities by simple method of continuous fraction expansion.

  2. Divergent evolution of the M3A family of metallopeptidases in plants.

    Science.gov (United States)

    Kmiec, Beata; Teixeira, Pedro F; Murcha, Monika W; Glaser, Elzbieta

    2016-07-01

    Plants, as stationary organisms, have developed mechanisms allowing them efficient resource reallocation and a response to changing environmental conditions. One of these mechanisms is proteome remodeling via a broad peptidase network present in various cellular compartments including mitochondria and chloroplasts. The genome of the model plant Arabidopsis thaliana encodes as many as 616 putative peptidase-coding genes organized in 55 peptidase families. In this study, we describe the M3A family of peptidases, which comprises four members: mitochondrial and chloroplastic oligopeptidase (OOP), cytosolic oligopeptidase (CyOP), mitochondrial octapeptidyl aminopeptidase 1 (Oct1) and plant-specific protein of M3 family (PSPM3) of unknown function. We have analyzed the evolutionary conservation of M3A peptidases across plant species and the functional specialization of the three distinct subfamilies. We found that the subfamily-containing OOP and CyOP-like peptidases, responsible for oligopeptide degradation in the endosymbiotic organelles (OOP) or in the cytosol (CyOP), are highly conserved in all kingdoms of life. The Oct1-like peptidase subfamily involved in pre-protein maturation in mitochondria is conserved in all eukaryotes, whereas the PSPM3-like protein subfamily is strictly conserved in higher plants only and is of unknown function. Specific characteristics within PSPM3 sequences, i.e. occurrence of a N-terminal transmembrane domain and amino acid changes in distal substrate-binding motif, distinguish PSPM3 proteins from other members of M3A family. We performed peptidase activity measurements to analyze the role of substrate-binding residues in the different Arabidopsis M3A paralogs. © 2016 Scandinavian Plant Physiology Society.

  3. Real-time monitoring of genetically modified Chlamydomonas reinhardtii during the Foton M3 space mission and ground irradiation experiment

    Science.gov (United States)

    Lambreva, Maya; Rea, Giuseppina; Antonacci, Amina; Serafini, Agnese; Damasso, Mario; Margonelli, Andrea; Johanningmeier, Udo; Bertalan, Ivo; Pezzotti, Gianni; Giardi, Maria Teresa

    Long-term space exploration, colonization or habitation requires biological life support systems capable to cope with the deleterious space environment. The use of oxygenic photosynthetic microrganisms is an intriguing possibility mainly for food, O2 and nutraceutical compounds production. The critical points of utilizing plantsor algae-based life support systems are the microgravity and the ionizing radiation, which can influence the performance of these organisms. The aim of the present study was to assess the effects of space environment on the photosynthetic activity of various microrganisms and to select space stress-tolerant strains. Site-directed and random mutants of the unicellular green alga Chlamydomonas reinhardtii of Photosystem II D1 protein were used as a model system to test and select the amino acid substitutions capable to account for space stress tolerance. We focussed our studies also on the accumulation of the Photosystem II photoprotective carotenoids (the xantophylls violaxanthin, anteraxanthin and zeaxanthin), powerful antioxidants that epidemiological studies demonstrated to be human vision protectors. Metabolite profiling by quantitative HPLC methods revealed the organisms and the stress conditions capable to accumulate the highest pigment levels. In order to develop a project for a rationale metabolic engineering of algal secondary metabolites overproduction, we are performing expression analyses on the carotenoid biosynthetic pathway under physiological and mimicked space conditions. To identify the consequences of the space environment on the photosynthetic apparatus the changes in the Photosystem II efficiency were monitored in real time during the ESA-Russian Foton-M3 mission in September 2007. For the space flight a high-tech, multicell fluorescence biosensor, Photo-II, was designed and built by the Centre for Advanced Research in Space Optics in collaboration with Kayser-Italy, Biosensor and DAS. Photo-II is an automatic device

  4. Oxylipin biosynthesis in spikemoss Selaginella moellendorffii: Molecular cloning and identification of divinyl ether synthases CYP74M1 and CYP74M3.

    Science.gov (United States)

    Gorina, Svetlana S; Toporkova, Yana Y; Mukhtarova, Lucia S; Smirnova, Elena O; Chechetkin, Ivan R; Khairutdinov, Bulat I; Gogolev, Yuri V; Grechkin, Alexander N

    2016-04-01

    Nonclassical P450s of CYP74 family control the secondary conversions of fatty acid hydroperoxides to bioactive oxylipins in plants. At least ten genes attributed to four novel CYP74 subfamilies have been revealed by the recent sequencing of the spikemoss Selaginella moellendorffii Hieron genome. Two of these genes CYP74M1 and CYP74M3 have been cloned in the present study. Both recombinant proteins CYP74M1 and CYP74M3 were active towards the 13(S)-hydroperoxides of α-linolenic and linoleic acids (13-HPOT and 13-HPOD, respectively) and exhibited the activity of divinyl ether synthase (DES). Products were analyzed by gas chromatography-mass spectrometry. Individual oxylipins were purified by HPLC and finally identified by their NMR data, including the (1)H NMR, 2D-COSY, HSQC and HMBC. CYP74M1 (SmDES1) specifically converted 13-HPOT to (11Z)-etherolenic acid and 13-HPOD to (11Z)-etheroleic acid. CYP74M3 (SmDES2) turned 13-HPOT and 13-HPOD mainly to etherolenic and etheroleic acids, respectively. CYP74M1 and CYP74M3 are the first DESs detected in non-flowering plants. The obtained results demonstrate the existence of the sophisticated oxylipin biosynthetic machinery in the oldest taxa of vascular plants.

  5. The Abundance of Lithium in an AGB Star in the Globular Cluster M3 (NGC 5272)

    CERN Document Server

    Givens, R A

    2016-01-01

    A survey of red giants in the globular cluster M3 with the Hydra multi-object spectrograph on the WIYN 3.5-m telescope indicated a prominent Li I 6707 $\\AA$ feature in the red giant vZ 1050. Follow-up spectroscopy with the ARC 3.5-m telescope confirmed this observation and yielded a derived abundance of A(Li)$_{NLTE}$ = 1.6 $\\pm$ 0.05. In addition, the high oxygen and low sodium abundances measured from the same spectrum suggest that vZ 1050 is a first generation cluster star. The location vZ 1050 above the horizontal branch and blueward of the red giant branch in the cluster's color-magnitude diagram places vZ 1050 on M3's asymptotic giant branch. The likely source for the enhanced lithium abundance is the Cameron-Fowler mechanism operating in vZ 1050 itself.

  6. The Abundance of Lithium in an ABG Star in the Globular Cluster M3 (NGC 5272)

    Science.gov (United States)

    Givens, R. A.; Pilachowski, C. A.

    2016-12-01

    A survey of red giants in the globular cluster M3 with the Hydra multi-object spectrograph on the WIYN 3.5 m telescope indicated a prominent Li i 6707 Å feature in the red giant vZ 1050. Followup spectroscopy with the ARC 3.5 m telescope confirmed this observation and yielded a derived abundance of A(Li)NLTE = 1.6 ± 0.05. In addition, the high oxygen and low sodium abundances measured from the same spectrum suggest that vZ 1050 is a first generation cluster star. The location of vZ 1050 above the horizontal branch and blueward of the red giant branch in the cluster’s color-magnitude diagram places vZ 1050 on M3's asymptotic giant branch. The likely source for the enhanced lithium abundance is the Cameron-Fowler mechanism operating in vZ 1050 itself.

  7. M3A system (2000–2005 – operation and maintenance

    Directory of Open Access Journals (Sweden)

    G. Petihakis

    2006-05-01

    Full Text Available During the Pilot Phase of the Mediterranean Forecasting System (MFSPP (1998–2001 a prototype observing system (Mediterranean Moored Multi-sensor Array – M3A was designed, developed and operated in the Cretan Sea for continuous oceanographic measurements in real time. The main problems encountered were associated with biofouling, underwater and aerial communication and with the design of the surface buoy. In the second phase of the MFS project named Mediterranean Forecasting System Towards Environmental Predictions (MFSTEP (2001–2005, the aim was to solve those problems and to consolidate the M3A. During the approximately five years of operation there were 13 scheduled and 15 emergency visits with a total duration of 65 days. The acquired experience through the maintenance program proved that the continuous observation of a so important system with a relative low cost is feasible.

  8. M3MS-16OR0401086 – Report on NEAMS Workbench Support for MOOSE Applications

    Energy Technology Data Exchange (ETDEWEB)

    Lefebvre, Robert A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Reactor and Nuclear Systems Division; Langley, Brandon R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Reactor and Nuclear Systems Division; Thompson, Adam B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Reactor and Nuclear Systems Division

    2016-09-23

    This report summarizes the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Workbench from Oak Ridge National Laboratory (ORNL) and the integration of the MOOSE framework. This report marks the completion of NEAMS milestone M3MS-16OR0401086. This report documents the developed infrastructure to support the MOOSE framework applications, the applications’ results, visualization status, the collaboration that facilitated this progress, and future considerations.

  9. Relativistic electrons high doses at International Space Station and Foton M2/M3 satellites

    Science.gov (United States)

    Dachev, T. P.; Tomov, B.; Matviichuk, Yu.; Dimitrov, Pl.; Bankov, N.

    2009-12-01

    The paper presents observation of relativistic electrons. Data are collected by the Radiation Risk Radiometer-Dosimeters (R3D) B2/B3 modifications during the flights of Foton M2/M3 satellites in 2005 and 2007 as well as by the R3DE instrument at the European Technology Exposure Facility (EuTEF) on the Columbus External Payload Adaptor at the International Space Station (ISS) in the period February 20 - April 28, 2008. On the Foton M2/M3 satellites relativistic electrons are observed more frequently than on the ISS because of higher (62.8°) inclination of the orbit. At both Foton satellites the usual duration of the observations are a few minutes long. On the ISS the duration usually is about 1 min or less. The places of observations of high doses due to relativistic electrons are distributed mainly at latitudes above 50° geographic latitude in both hemispheres on Foton M2/M3 satellites. A very high maximum is found in the southern hemisphere at longitudinal range 0°-60°E. At the ISS the maximums are observed between 45° and 52° geographic latitude in both hemispheres mainly at longitudes equatorward from the magnetic poles. The measured absolute maximums of dose rates generated by relativistic electrons are found to be as follows: 304 μGy h -1 behind 1.75 g cm -2 shielding at Foton M2, 2314 μGy h -1 behind 0.71 g cm -2 shielding at Foton M3 and 19,195 μGy h -1 (Flux is 8363 cm -2 s -1) behind les than 0.4 g cm -2 shielding at ISS.

  10. New species of Triplocania Roesler with forewing M3 forked (Psocodea: 'Psocoptera': Ptiloneuridae), from Brazil.

    Science.gov (United States)

    Da Silva Neto, Alberto Moreira; Rafael, José Albertino; Aldrete, Alfonso N García

    2014-07-16

    Four new Brazilian species of Triplocania with forewing M3 forked are described and illustrated based on male specimens, namely: Triplocania lamasi n.sp. (Mato Grosso: Brazil), Triplocania mariateresae n.sp. (Rio de Janeiro: Brazil), Triplocania newi n.sp. (Tocantins: Brazil) and Triplocania plaumanni n.sp. (Santa Catarina: Brasil). They differ from all the other species in the genus, in which the males are known, by the hypandrium and phallosome structures.

  11. A novel antiarrhythmic target-M3-R/IKM3

    Institute of Scientific and Technical Information of China (English)

    Bao-fengYANG

    2004-01-01

    The total efficient rate of antiarrhythmic agents is only 30%to 60%, and the compounding problem is the lack of an effective therapy for some serious arrhythmias. Muscarinic receptors have been cloned and subdivided into the five subtypes M1, M2, M3,M4 and M5. And M2 receptors have long been believed to be the only functional subtype of muscarinic acetylcholine receptor (mAChR) in the heart, although recent studies have provided

  12. A picrotoxin-specific conformational change in the glycine receptor M2-M3 loop.

    Science.gov (United States)

    Hawthorne, Rebecca; Lynch, Joseph W

    2005-10-28

    The external loop linking the M2 and M3 transmembrane domains is crucial for coupling agonist binding to channel gating in the glycine receptor chloride channel (GlyR). A substituted cysteine accessibility scan previously showed that glycine activation increased the surface accessibility of 6 contiguous residues (Arg271-Lys276) toward the N-terminal end of the homomeric alpha1 GlyR M2-M3 loop. In the present study we used a similar approach to determine whether the allosteric antagonist, picrotoxin, could impose conformational changes to this domain that cannot be induced by varying agonist concentrations alone. Picrotoxin slowed the reaction rate of a sulfhydryl-containing compound (MTSET) with A272C, S273C, and L274C. Before interpreting this as a picrotoxin-specific conformational change, it was necessary to eliminate the possibility of steric competition between picrotoxin and MTSET. Accordingly, we showed that picrotoxin and the structurally unrelated blocker, bilobalide, were both trapped in the R271C GlyR in the closed state and that a point mutation to the pore-lining Thr6' residue abolished inhibition by both compounds. We also demonstrated that the picrotoxin dissociation rate was linearly related to the channel open probability. These observations constitute a strong case for picrotoxin binding in the pore. We thus conclude that the picrotoxin-specific effects on the M2-M3 loop are mediated allosterically. This suggests that the M2-M3 loop responds differently to the occupation of different binding sites.

  13. Development, Implementation and Evaluation of an M3 Community Health Curriculum

    Directory of Open Access Journals (Sweden)

    Staci Young, MS

    2004-03-01

    Full Text Available Objectives: This paper describes the development, implementation and evaluation of an M3 community health curriculum that responds to recent changes within the health care finance and delivery system. Methods: The new curriculum was developed based on AAMC recommendations, LCME requirements, a national review of undergraduate community health curricula, and an internal review of the integration of community health concepts in M3 clerkships. Results: The M3 curriculum teaches: 1 the importance of being a community responsive physician; 2 SES factors that influence health; 3 cultural competency; and 4 the role of physicians as health educators. Student evaluations for the first twelve months of implementation indicate that students are most satisfied with presentations and less satisfied with required readings and a patient interview project. Discussion: Most students agree that at the completion of the course they understand what it means to be a community-responsive physician, and they have developed skills to help them become more community responsive. Evaluation tools need to be developed to assess if students’ behavior has changed due to course participation.

  14. Mice Lacking M1 and M3 Muscarinic Acetylcholine Receptors Have Impaired Odor Discrimination and Learning

    Science.gov (United States)

    Chan, Wilson; Singh, Sanmeet; Keshav, Taj; Dewan, Ramita; Eberly, Christian; Maurer, Robert; Nunez-Parra, Alexia; Araneda, Ricardo C.

    2017-01-01

    The cholinergic system has extensive projections to the olfactory bulb (OB) where it produces a state-dependent regulation of sensory gating. Previous work has shown a prominent role of muscarinic acetylcholine (ACh) receptors (mAChRs) in regulating the excitability of OB neurons, in particular the M1 receptor. Here, we examined the contribution of M1 and M3 mAChR subtypes to olfactory processing using mice with a genetic deletion of these receptors, the M1−/− and the M1/M3−/− knockout (KO) mice. Genetic ablation of the M1 and M3 mAChRs resulted in a significant deficit in odor discrimination of closely related molecules, including stereoisomers. However, the discrimination of dissimilar molecules, social odors (e.g., urine) and novel object recognition was not affected. In addition the KO mice showed impaired learning in an associative odor-learning task, learning to discriminate odors at a slower rate, indicating that both short and long-term memory is disrupted by mAChR dysfunction. Interestingly, the KO mice exhibited decreased olfactory neurogenesis at younger ages, a deficit that was not maintained in older animals. In older animals, the olfactory deficit could be restored by increasing the number of new born neurons integrated into the OB after exposing them to an olfactory enriched environment, suggesting that muscarinic modulation and adult neurogenesis could be two different mechanism used by the olfactory system to improve olfactory processing. PMID:28210219

  15. Goldschmidt crater and the Moon's north polar region: Results from the Moon Mineralogy Mapper (M3)

    Science.gov (United States)

    Cheek, L.C.; Pieters, C.M.; Boardman, J.W.; Clark, R.N.; Combe, J.-P.; Head, J.W.; Isaacson, P.J.; McCord, T.B.; Moriarty, D.; Nettles, J.W.; Petro, N.E.; Sunshine, J.M.; Taylor, L.A.

    2011-01-01

    Soils within the impact crater Goldschmidt have been identified as spectrally distinct from the local highland material. High spatial and spectral resolution data from the Moon Mineralogy Mapper (M3) on the Chandrayaan-1 orbiter are used to examine the character of Goldschmidt crater in detail. Spectral parameters applied to a north polar mosaic of M3 data are used to discern large-scale compositional trends at the northern high latitudes, and spectra from three widely separated regions are compared to spectra from Goldschmidt. The results highlight the compositional diversity of the lunar nearside, in particular, where feldspathic soils with a low-Ca pyroxene component are pervasive, but exclusively feldspathic regions and small areas of basaltic composition are also observed. Additionally, we find that the relative strengths of the diagnostic OH/H2O absorption feature near 3000 nm are correlated with the mineralogy of the host material. On both global and local scales, the strongest hydrous absorptions occur on the more feldspathic surfaces. Thus, M3 data suggest that while the feldspathic soils within Goldschmidt crater are enhanced in OH/H2O compared to the relatively mafic nearside polar highlands, their hydration signatures are similar to those observed in the feldspathic highlands on the farside. Copyright 2011 by the American Geophysical Union.

  16. The Moon Mineralogy (M3) Imaging Spectrometer: Early Assessment of the Spectral, Radiometric, Spatial and Uniformity Properties

    Science.gov (United States)

    Green, Robert O.; Pieters, C. M.; Boardman, J.; Barr, D.; Bruce, C.; Bousman, J.; Chatterjee, A.; Eastwood, M.; Essandoh, V.; Geier, S.; Glavich, T.; Green, R.; Haemmerle, V.; Hyman, S.; Hovland, L.; Koch, T.; Lee, K.; Lundeen, S.; Motts, E.; Mouroulis, P.; Paulson, S.; Plourde, K.; Racho, C.; Robinson, D.; Rodriquez, J.

    2009-01-01

    The Moon Mineralogy Mapper's (M3) is a high uniformity and high signal-to-noise ratio NASA imaging spectrometer that is a guest instrument on the Indian Chandrayaan-1 Mission to the Moon. The laboratory measured spectral, radiometric, spatial, and uniformity characteristics of the M3 instrument are given. The M3 imaging spectrometer takes advantage of a suite of critical enabling capabilities to achieve its measurement requirement with a mass of 8 kg, power usage of 15 W, and volume of 25X18X12 cm. The M3 detector and spectrometer are cooled by a multi-stage passive cooler. This paper presents early M3 performance assessment results.

  17. 2000 m3大型钢制球罐的应力分析%Stress Analysis of 2000m3 Large Steel Storage Tank

    Institute of Scientific and Technical Information of China (English)

    李建奎; 刘峰; 刘娟; 付路路

    2015-01-01

    The static load stress analysis of steel storage tank was carried out with the finite element software, the cloud of stress and strain overall structure of the tank were obtained after applying static load and displacement constraints, and the strength assessment was carried out according to JB 4732-1995 steel pressure vessel analysis and design standards and GB12337-1998 steel spherical tanks. The results show that the overall structure of the tank is reliable. The available databases provide reliable academic value for the optimization and design of the subsequent large tank.%应用有限元软件对钢制球罐进行了静载应力分析,施加位移约束和静载荷之后,得到了球罐整体结构的应力及应变云图,并依据JB 4732-1995《钢制压力容器分析设计标准》,参照GB12337—1998《钢制球形储罐》对其进行了强度评定,结果表明该结构是可靠的。分析出的数据库为以后球罐的优化设计提供了可靠的理论价值。

  18. Vasco da Gama 33000m3耙吸挖泥船

    Institute of Scientific and Technical Information of China (English)

    刘厚恕; 顾洁

    2001-01-01

    The 33000m3 Vasco da Gama was delivered to the owner in 2000, which is the largest trailing suction hopper dredger up to now. The vessel is designed for the following main functions: loading spoil with two side suction pipes at a depth of 45-60m; transporting the spoil at a speed of 16.Skn; dumping spoil through six pairs of bottom doors; self-discharging of spoil via floating pipeline; self-discharging of spoil through bow-jet nozzle; deep dredging at 131m with 5500kW submerged dredge pump. This paper fully described its arrangement, key dredging equipments and major design features,

  19. Deposition of CdTe films under microgravity: Foton M3 mission

    Energy Technology Data Exchange (ETDEWEB)

    Benz, K.W.; Croell, A. [Freiburger Materialforschungszentrum FMF, Albert-Ludwigs-Universitaet Freiburg (Germany); Zappettini, A.; Calestani, D. [CNR Parma, Instituto Materiali Speciali per Elettronica e Magnetismo IMEM, Fontani Parma (Italy); Dieguez, E. [Universidad Autonoma de Madrid (Spain). Departamento de Fisica de Materiales; Carotenuto, L.; Bassano, E. [Telespazio Napoli, Via Gianturco 31, 80146 Napoli (Italy); Fiederle, M.

    2009-10-15

    Experiments of deposition of CdTe films have been carried out under microgravity in the Russian Foton M3 mission. The influence of gravity has been studied with these experiments and compared to the results of simulations. The measured deposition rate could be confirmed by the theoretical results for lower temperatures. For higher temperatures the measured thickness of the deposited films was larger compared to the theoretical data. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Postpartum Diagnosis of AML-M3: A Rare Case Report

    Directory of Open Access Journals (Sweden)

    Manjula Biradar

    2016-07-01

    Full Text Available A 27 year old female gravid 2, para 1, presented at 39 weeks of gestation with pain in abdomen going in for labour, and delivered healthy baby. The patient later had post-partum haemorrhage with Prothrombin Time (PT 10min, platelet count 70,000 cells/cumm. Peripheral smear showed shift to left with myeloblasts, promyelocytes. The diagnosis of Acute Myeloid Leukemia (AML was given and advised for bone marrow examination. The diagnosis AML-M3 was confirmed by marrow study. Unfortunately, patient went in for Disseminated Intravascular Coagulation (DIC and died 2 days after the diagnosis.

  1. Lunar Exploration Insights Recognized from Chandrayaan-1 M3 Imaging Spectrometer

    Science.gov (United States)

    Pieters, Carle; Green, Robert O.; Boardman, Joseph

    2016-07-01

    One of the most important lessons learned from the renaissance of lunar exploration over the last decade is that new discoveries and surprises occur with every new mission to the Moon. Although the color of the Moon had been measured using Earth-based telescopes even before Apollo, modern instruments sent to orbit the Moon provide a scope of inquiry unimaginable during the last century. Spacecraft have now been successfully sent to the Moon by six different space agencies from around the world and the number is growing. The Indian Chandrayaan- 1 spacecraft carried a suite of indigenous instruments as well as several guest instruments from other countries, including the Moon Mineralogy Mapper (M-cube) supplied by NASA. Even though Chandrayaan's lifetime in orbit was shortened by technical constraints, M3 provided a taste of the power of near-infrared imaging spectroscopy used for science and exploration at the Moon. Contrary to expectations, the lunar surface was discovered to be hydrated, which is now known to result from solar wind H combining with O of rocks and soil. Surficial hydration was found to be pervasive across the Moon and the limited data hint at both local concentrations and temporal variations. The prime objective of M3 was to characterize lunar mineralogy in a spatial context. Working in tandem with related instruments on JAXA's SELENE, M3 readily recognized and mapped known minerals from mare and highland terrains (pyroxenes, olivine) at high resolution, but also detected diagnostic properties of crystalline plagioclase which, when mapped across a spatial context, enabled the unambiguous identification of a massive crustal layer of plagioclase that clearly resulted from an early magma ocean. An additional surprise came with the discovery of a new rock type on the Moon that had not been recognized in samples returned by Apollo and Luna: a Mg-rich spinel anorthosite associated with material excavated from some of the greatest lunar depths. In

  2. Forsmark Site: M3 modelling and 2D visualisation of the hydrochemical parameters in Forsmark groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Gurban, Ioana (3D Terra (Canada))

    2008-08-15

    This work represents the stage 2.3 of the hydrochemical evaluation and modelling of the Forsmark data. This comprises M3 modelling and 2D visualisation of the data along the boreholes. The following conclusions can be drawn: - M3 modelling helped to summarise and understand the data, by using as variables the major elements and the isotopes delta18O and deltaD. - Previous alternative models and the experience from Forsmark 1.2, 2.1 and 2.2, helped to clarify different previously unsolved issues such as: the use of variables, tests with different endmembers, the use of only groundwater data in order to build a bedrock hydrochemical model. - The visualisation of the mixing proportions along the boreholes helps to understand the distribution of the data in the domain and to check and compare the results of different models; and therefore to chose the model which best describes the measured data. - The different M3 modelling tests resulted in the following conclusions: a) When calculating mixing proportions only samples from the boreholes will be used, b) the altered meteoric end-member which best describes the more shallow groundwater compositions is defined by a representative upper bedrock sample; the Littorina end-member employed the existing modelled compositions; the Deep saline and glacial end-members compositions were tested by means of a feasibility study and employed in the modelling. - Three models were presented. All the models are good and can be used, but the best is to use the one that fits the conceptual model best and the hydrogeochemical understanding. - The use of Littorina, Glacial, Deep Saline and Altered Meteoric end-members makes possible the comparison of different sites such as Laxemar and Forsmark. - All the data used in the M3 modelling and the results of the modelling and visualisation along the boreholes are presented in SKB database SIMON. - The extended data do not affect the results of the modelling of the Forsmark 2.3 dataset (the

  3. The Mediterranean Moored Multi-sensor Array (M3A: system development and initial results

    Directory of Open Access Journals (Sweden)

    K. Nittis

    Full Text Available Operational forecasting of ocean circulation and marine ecosystem fluctuations requires multi-parametric real-time measurements of physical and biochemical properties. The architecture of a system that is able to provide such measurements from the upper-thermocline layers of the Mediterranean Sea is described here. The system was developed for the needs of the Mediterranean Forecasting System and incorporates state-of-the-art sensors for optical and chemical measurements in the upper 100 m and physical measurements down to 500 m. Independent moorings that communicate via hydro-acoustic modems are hosting the sensors. The satellite data transfer and the large autonomy allow for the operation of the system in any open-ocean site. The system has been in pre-operational use in the Cretan Sea since January 2000. The results of this pilot phase indicate that multi-parametric real-time observations with the M3A system are feasible, if a consistent maintenance and re-calibration program is followed. The main limitations of the present configuration of M3A are related: (a to bio-fouling that primarily affects the turbidity and secondarily affects the other optical sensors, and (b to the limited throughput of the currently used satellite communication system.

    Key words. Atmospheric composition and structure (instruments and techniques. Oceanography: general (ocean prediction Oceanography: physical (upper ocean process

  4. Connexins and M3 Muscarinic Receptors Contribute to Heterogeneous Ca2+ Signaling in Mouse Aortic Endothelium

    Directory of Open Access Journals (Sweden)

    François-Xavier Boittin

    2013-02-01

    Full Text Available Background/Aims: Smooth muscle tone is controlled by Ca2+ signaling in the endothelial layer. Mouse endothelial cells are interconnected by gap junctions made of Connexin40 (Cx40 and Cx37, which allow the exchange of signaling molecules to coordinate their activity. Here, we investigated the role of Cx40 in the endothelial Ca2+ signaling of the mouse aorta. Methods: Ca2+ imaging was performed on intact aortic endothelium from both wild type (Cx40+/+ and Connexin40-deficient (Cx40 -/- mice. Results: Acetylcholine (ACh induced early fast and high amplitude Ca2+ transients in a fraction of endothelial cells expressing the M3 muscarinic receptors. Inhibition of intercellular communication using carbenoxolone or octanol fully blocked the propagation of ACh-induced Ca2+ transients toward adjacent cells in WT and Cx40-/- mice. As compared to WT, Cx40-/- mice displayed a reduced propagation of ACh-induced Ca2+ waves, indicating that Cx40 contributes to the spreading of Ca2+ signals. The propagation of those Ca2+ responses was not blocked by suramin, a blocker of purinergic ATP receptors, indicating that there is no paracrine effect of ATP release on the Ca2+ waves. Conclusions: Altogether our data show that Cx40 and Cx37 contribute to the propagation and amplification of the Ca2+ signaling triggered by ACh in endothelial cells expressing the M3 muscarinic receptors.

  5. HST Observations of Blue Straggler Stars in the Core of the Globular Cluster M3

    CERN Document Server

    Ferraro, F R; Pecci, F F; Cacciari, C; Dorman, B; Rood, R T; Buonanno, R; Corsi, C E; Burgarella, D; Laget, M

    1997-01-01

    The core of the Galactic Globular Cluster M3 (NGC 5272) has been observed with the WFPC2 through the filters F255W, F336W, F555W, and F814W. Using these observations along with a thorough reanalysis of earlier catalogs, we have produced a catalog of blue straggler stars (BSS) spanning the cluster. Earlier studies and the fainter part of our sample suffer severe selection biases. Our analysis is based on a more reliable bright global sample of 122 BSS. We confirm earlier suggestions that the radial BSS distribution in M3 is bimodal. It is strongly peaked in the center, has a clear dip 100--200" from the center, and rises again at larger radii. The observed distribution agrees with the dynamical model of Sigurdsson et al. (1994) which takes into account both star collisions and merging of primordial binaries for the origin of BSS. The observed luminosity functions of BSS in the inner and outer parts of the cluster are different. Interpreting these using the models of Bailyn & Pinsonneault (1995), we suggest...

  6. Scale-up of industrial biodiesel production to 40 m3using a liquid lipase formulation

    DEFF Research Database (Denmark)

    Price, Jason; Nordblad, Mathias; Martel, Hannah H.

    2016-01-01

    In this work, we demonstrate the scale-up from an 80 L fed-batch scale to 40 m3 along with the design of a 4 m3continuous process for enzymatic biodiesel production catalysed by NS-40116 (a liquid formulation of a modified Thermomyces lanuginosus lipase). Based on the analysis of actual pilot plant...... the fed-batch and CSTR cases. Given similar operating conditions, the CSTR operation on average, has a reaction time which is 1.3 times greater than the fed-batch operation. We also showed how the process metrics can be used to quickly estimate the selling price of the enzyme. Assuming a biodiesel selling...... price of 0.6 USD/kg and a one-time use of the enzyme (0.1% (w/woil) enzyme dosage); the enzyme can then be sold for 30 USD/kg which ensures that that the enzyme cost is not more than 5% of the biodiesel revenue. This article is protected by copyright. All rights reserved...

  7. M3A system (2000–2005 – operation and maintenance

    Directory of Open Access Journals (Sweden)

    G. Petihakis

    2007-01-01

    Full Text Available During the pilot phase of the Mediterranean Forecasting System (MFSPP (2000 2003, a prototype observing system (Mediterranean Moored Multi-sensor Array – M3A was designed, developed and operated in the Cretan Sea for continuous oceanographic measurements in real time. The main problems encountered were associated with biofouling, underwater and aerial communication and with the design of the surface buoy. In the second phase of the MFS project named Mediterranean Forecasting System Towards Environmental Predictions (MFSTEP (2003–2005, the aim was to solve those problems and to consolidate the M3A. For the minimisation of biofouling a pilot field study was performed and the techniques of bromine solution and copper shielding were evaluated. Additionally, the oligotrophy of the Aegean Sea dictated the need to ignore factory calibrations and to perform site-specific laboratory calibrations of the sensors. This procedure was proved necessary and produced calibration coefficients that gave results comparable to the measurements obtained with the laboratory analysis method. During the approximately five years of operation, there were 13 scheduled and 15 emergency visits, with a total duration of 65 days. The acquired experience through the maintenance program proved that the continuous observation of such a very important system with a relative low cost is feasible.

  8. Machining risk of beryllium disease and sensitization with median exposures below 2 micrograms/m3.

    Science.gov (United States)

    Kreiss, K; Mroz, M M; Newman, L S; Martyny, J; Zhen, B

    1996-07-01

    We examined the prevalence of beryllium sensitization in relation to work process and beryllium exposure measurements in a beryllia ceramics plant that had operated since 1980. We interviewed 136 employees (97.8% of the workforce), ascertained beryllium sensitization with the beryllium lymphocyte proliferation blood test, and reviewed historical industrial hygiene measurements. Of eight beryllium-sensitized employees (5.9%), six (4.4% of participating employees) had granulomatous disease on transbronchial lung biopsy. Machinists had a sensitization rate of 14.3% compared to a rate of 1.2% among other employees. Machining had significantly higher general area and breathing zone measurements than did other processes in the time period in which most beryllium-sensitized cases had started machining work. Daily weighted average (DWA) estimates of exposure for matching processes also exceeded estimates for other work processes in that time period, with a median DWA of 0.9 microgram/m3. Machining process DWAs accounted for the majority of DWAs exceeding the 2.0 micrograms/m3 OSHA standard, with 8.1% of machining DWAs above the standard. We conclude that lowering machining process-related exposures may be important to lowering risk of beryllium disease.

  9. China Encourages Natural Gas Development and Utilization

    Institute of Scientific and Technical Information of China (English)

    Zhou Xuehou; Jiang Shiang

    1997-01-01

    @@ China is one of the earliest nations in developing and utilizing natural gas with modern drilling technique adopted as early as in the 1940s, and the scale of the country's gas resources exploration and development has been expanded since 1950s. At the end of 1995, its yearly gas production reached 17.4 × 109 m3.

  10. VARIABILITY STUDIES IN M3 GENERATION IN BLACKGRAM (VIGNA MUNGO (L.HEPPER

    Directory of Open Access Journals (Sweden)

    M P MESHRAM

    2013-12-01

    Full Text Available In the present study, pure line seeds of black gram variety viz. T-9, TPU-4 and one promising genotype AKU-18 was treated with gamma irradiation (15kR, 25kR and 35kR with the objective to assess the variability in M3 generation.. Highest GCV and PCV and high estimates of heritability were recorded for the characters sprouting percentage, number of pods plant-1 and grain yield plant-1 (g. High heritability accompanied with high genetic advance was recorded for number of pods plant-1 governed by additive gene effects and therefore selection based on phenotypic performance will be useful to improve character in future.

  11. Trimble M3 1” and South Nts-362R Total Station Angle Measurement Accuracy Analysis

    Directory of Open Access Journals (Sweden)

    Oleniacz Grzegorz

    2017-03-01

    Full Text Available The main purpose of this study was to obtain information about the actual precision of angle measurements with two instruments (Trimble M3 1 "and South NTS-362R, realizable in given measurement conditions. This object is achieved by using a simplified method of testing instruments contained in the PN-ISO 17123-3 standard [1]. This is a continuation of research described in [2], carried out on the same test base, but this time in a different, less favorable field conditions. The use of the same instrument has created an opportunity to compare and analyze the measurement results. The scope of work includes the measurement and results preparation along with statistical processing of the obtained results for both instruments.

  12. Half lives of spherical proton emitters using density dependent M3Y interaction

    CERN Document Server

    Chowdhury, P R; Basu, D N

    2005-01-01

    The proton radioactivity lifetimes of spherical proton emitters from the ground and the isomeric states are calculated using the microscopic nucleon-nucleus interaction potentials. The daughter nuclei density distributions are folded with a realistic density dependent M3Y effective interaction supplemented by a zero-range pseudo-potential. The density dependence parameters of the interaction are extracted from the nuclear matter calculations. The saturation energy per nucleon used for nuclear matter calculations is determined from the co-efficient of the volume term of Bethe-Weizsacker mass formula which is evaluated by fitting the recent experimental and estimated atomic mass excesses from Audi-Wapstra-Thibault atomic mass table by minimizing the mean square deviation. The quantum mechanical tunneling probability is calculated within the WKB approximation. Spherical charge distributions are used for calculating the Coulomb interaction potentials. These calculations provide good estimates for the observed pro...

  13. Electrodialytic remediation of CCA-treated waste wood in a 2 m3 pilot plant

    DEFF Research Database (Denmark)

    Christensen, Iben Vernegren; Pedersen, Anne Juul; Ottosen, Lisbeth M.;

    2006-01-01

    Waste wood that has been treated with chromated-copper-arsenate (CCA) poses a potential environmental problem due to the content of copper, chromium and arsenic. A pilot plant for electrodialytic remediation of up to 2 m3 wood has been designed and tested and the results are presented here. Several...... fractions. The best remediation efficiency was obtained in an experiment with an electrode distance of 60 cm, and 100 kg wood chips. In this experiment 87% copper, 81% chromium and > 95% arsenic were removed. One other experiment was also analysed for arsenic. In this experiment the distance between...... the working electrodes was 1.5 m and here 95% As was removed. The results showed that arsenic may be the easiest removable of the copper, chromium and arsenic investigated here. This is very encouraging since arsenic is the CCA components of most environmental concern....

  14. Variable Star Status of Two Stars: V204 and I-I-39 in M3

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The star I-I-42 (=vZ1390), a cluster member in M3, located near the red edge of the instability strip of the horizontal branch, was discovered by Roberts and Sandage as a low amplitude variable, it was designated as V204 in the "second catalogue of variable stars in globular clusters", but its coordinates given in all versions of this catalogue are wrong since 1955. We argue that V204 is indeed a low amplitude HB variable star, located near to the red edge of the instability strip, with a period of 0.74785d and an amplitude of about 0.04 mag in V. We also find that the red cluster member star I-I-39 is a low amplitude variable with a period of 1.16d and amplitude of about 0.03 mag in V which might be pulsating at the second overtone.

  15. Modeling of lithium granule injection in NSTX using M3D-C1

    Science.gov (United States)

    Fil, A.; Kolemen, E.; Ferraro, N.; Jardin, S.; Parks, P. B.; Lunsford, R.; Maingi, R.

    2017-05-01

    In this paper, we present simulations of pedestal control by lithium granule injection (LGI) in NSTX. A model for small granule ablation has been implemented in the M3D-C1 code (Jardin et al 2012 Comput. Sci. Discovery 5 014002), allowing the simulation of realistic lithium granule injections. 2D and 3D simulations of Li injections in NSTX H-mode plasmas are performed and the effect of granule size, injection angle and velocity on the pedestal gradient increase is studied. The amplitude of the local pressure perturbation caused by the granules is found to be highly dependent on the solid granule size. Adjusting the granule injection velocity allows one to inject more particles at the pedestal top. 3D simulations show the destabilization of high order MHD modes whose amplitude is directly linked to the localized pressure perturbation, which is found to depend on the toroidal localization of the granule density source.

  16. Metabolic Engineering of Light and Dark Biochemical Pathways in Wild-Type and Mutant Strains of Synechocystis PCC 6803 for Maximal, 24-Hour Production of Hydrogen Gas

    Energy Technology Data Exchange (ETDEWEB)

    Ely, Roger L.; Chaplen, Frank W.R.

    2014-03-11

    enhanced H2 production profiles using selected culture conditions and inhibitors of specific pathways in WT cells and an NDH-1 mutant; 3. Create Synechocystis PCC 6803 mutant strains with modified hydrogenases exhibiting increased O2 tolerance and greater H2 production; and 4. Integrate enhanced hydrogenase mutants and culture and metabolic factor studies to maximize 24-hour H2 production.

  17. CH5M3D: an HTML5 program for creating 3D molecular structures.

    Science.gov (United States)

    Earley, Clarke W

    2013-11-18

    While a number of programs and web-based applications are available for the interactive display of 3-dimensional molecular structures, few of these provide the ability to edit these structures. For this reason, we have developed a library written in JavaScript to allow for the simple creation of web-based applications that should run on any browser capable of rendering HTML5 web pages. While our primary interest in developing this application was for educational use, it may also prove useful to researchers who want a light-weight application for viewing and editing small molecular structures. Molecular compounds are drawn on the HTML5 Canvas element, with the JavaScript code making use of standard techniques to allow display of three-dimensional structures on a two-dimensional canvas. Information about the structure (bond lengths, bond angles, and dihedral angles) can be obtained using a mouse or other pointing device. Both atoms and bonds can be added or deleted, and rotation about bonds is allowed. Routines are provided to read structures either from the web server or from the user's computer, and creation of galleries of structures can be accomplished with only a few lines of code. Documentation and examples are provided to demonstrate how users can access all of the molecular information for creation of web pages with more advanced features. A light-weight (≈ 75 kb) JavaScript library has been made available that allows for the simple creation of web pages containing interactive 3-dimensional molecular structures. Although this library is designed to create web pages, a web server is not required. Installation on a web server is straightforward and does not require any server-side modules or special permissions. The ch5m3d.js library has been released under the GNU GPL version 3 open-source license and is available from http://sourceforge.net/projects/ch5m3d/.

  18. Natural gas; Gas Natural

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Carlos A.; Moraes, Claudia C.D. [Eletricidade de Sao Paulo S.A. (ELETROPAULO), Sao Paulo, SP (Brazil); Fonseca, Carlos H.F. [Centrais Eletricas de Santa Catarina S.A., Florianopolis, SC (Brazil); Silva, Clecio Fabricio da; Alves, Ricardo P. [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil); Sposito, Edivaldo Soares; Hulle, Lutero [Espirito Santo Centrais Eletricas S.A. (ESCELSA), Vitoria, ES (Brazil); S. Martins, Icaro da [Centrais Eletricas do Norte do Brasil S.A. (ELETRONORTE), Belem, PA (Brazil); Vilhena, Joao Luiz S. de [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Fagundes, Zaluar Aquino [Companhia Estadual de Energia Eletrica do Estado do Rio Grande do Sul, Porto Alegre, RS (Brazil)

    1996-12-31

    An increase in the consumption of natural gas in Brazil is an expected fact in what concerns energetic planning. This work presents the existing situation in what concerns natural gas utilization in the main world economies, as well as an analysis of the participation of this fuel among the energy final consumption per sources. The Brazilian consumption of natural gas is also analysed as well as the international agreement between Brazil and Bolivia for natural gas commercialization. Some legal, institutional and political aspects related to natural gas commercialization are also discussed. Finally, several benefits to be brought by the utilization of natural gas are presented 10 refs., 3 tabs.

  19. M3 Macrophages Stop Division of Tumor Cells In Vitro and Extend Survival of Mice with Ehrlich Ascites Carcinoma.

    Science.gov (United States)

    Kalish, Sergey; Lyamina, Svetlana; Manukhina, Eugenia; Malyshev, Yuri; Raetskaya, Anastasiya; Malyshev, Igor

    2017-01-26

    BACKGROUND M1 macrophages target tumor cells. However, many tumors produce anti-inflammatory cytokines, which reprogram the anti-tumor M1 macrophages into the pro-tumor M2 macrophages. We have hypothesized that the problem of pro-tumor macrophage reprogramming could be solved by using a special M3 switch phenotype. The M3 macrophages, in contrast to the M1 macrophages, should respond to anti-inflammatory cytokines by increasing production of pro-inflammatory cytokines to retain its anti-tumor properties. Objectives of the study were to form an M3 switch phenotype in vitro and to evaluate the effect of M3 macrophages on growth of Ehrlich ascites carcinoma (EAC) in vitro and in vivo. MATERIAL AND METHODS Tumor growth was initiated by an intraperitoneal injection of EAC cells into C57BL/6J mice. RESULTS 1) The M3 switch phenotype can be programed by activation of M1-reprogramming pathways with simultaneous inhibition of the M2 phenotype transcription factors, STAT3, STAT6, and/or SMAD3. 2) M3 macrophages exerted an anti-tumor effect both in vitro and in vivo, which was superior to anti-tumor effects of cisplatin or M1 macrophages. 3) The anti-tumor effect of M3 macrophages was due to their anti-proliferative effect. CONCLUSIONS Development of new biotechnologies for restriction of tumor growth using in vitro reprogrammed M3 macrophages is very promising.

  20. M3 Macrophages Stop Division of Tumor Cells In Vitro and Extend Survival of Mice with Ehrlich Ascites Carcinoma

    Science.gov (United States)

    Kalish, Sergey; Lyamina, Svetlana; Manukhina, Eugenia; Malyshev, Yuri; Raetskaya, Anastasiya; Malyshev, Igor

    2017-01-01

    Background M1 macrophages target tumor cells. However, many tumors produce anti-inflammatory cytokines, which reprogram the anti-tumor M1 macrophages into the pro-tumor M2 macrophages. We have hypothesized that the problem of pro-tumor macrophage reprogramming could be solved by using a special M3 switch phenotype. The M3 macrophages, in contrast to the M1 macrophages, should respond to anti-inflammatory cytokines by increasing production of pro-inflammatory cytokines to retain its anti-tumor properties. Objectives of the study were to form an M3 switch phenotype in vitro and to evaluate the effect of M3 macrophages on growth of Ehrlich ascites carcinoma (EAC) in vitro and in vivo. Material/Methods Tumor growth was initiated by an intraperitoneal injection of EAC cells into C57BL/6J mice. Results 1) The M3 switch phenotype can be programed by activation of M1-reprogramming pathways with simultaneous inhibition of the M2 phenotype transcription factors, STAT3, STAT6, and/or SMAD3. 2) M3 macrophages exerted an anti-tumor effect both in vitro and in vivo, which was superior to anti-tumor effects of cisplatin or M1 macrophages. 3) The anti-tumor effect of M3 macrophages was due to their anti-proliferative effect. Conclusions Development of new biotechnologies for restriction of tumor growth using in vitro reprogrammed M3 macrophages is very promising. PMID:28123171

  1. Automated measurement and monitoring of bioprocesses: key elements of the M(3)C strategy.

    Science.gov (United States)

    Sonnleitner, Bernhard

    2013-01-01

    The state-of-routine monitoring items established in the bioprocess industry as well as some important state-of-the-art methods are briefly described and the potential pitfalls discussed. Among those are physical and chemical variables such as temperature, pressure, weight, volume, mass and volumetric flow rates, pH, redox potential, gas partial pressures in the liquid and molar fractions in the gas phase, infrared spectral analysis of the liquid phase, and calorimetry over an entire reactor. Classical as well as new optical versions are addressed. Biomass and bio-activity monitoring (as opposed to "measurement") via turbidity, permittivity, in situ microscopy, and fluorescence are critically analyzed. Some new(er) instrumental analytical tools, interfaced to bioprocesses, are explained. Among those are chromatographic methods, mass spectrometry, flow and sequential injection analyses, field flow fractionation, capillary electrophoresis, and flow cytometry. This chapter surveys the principles of monitoring rather than compiling instruments.

  2. M3C: A Computational Approach To Describe Statistical Fragmentation of Excited Molecules and Clusters.

    Science.gov (United States)

    Aguirre, Néstor F; Díaz-Tendero, Sergio; Hervieux, Paul-Antoine; Alcamí, Manuel; Martín, Fernando

    2017-02-07

    The Microcanonical Metropolis Monte Carlo method, based on a random sampling of the density of states, is revisited for the study of molecular fragmentation in the gas phase (isolated molecules, atomic and molecular clusters, complex biomolecules, etc.). A random walk or uniform random sampling in the configurational space (atomic positions) and a uniform random sampling of the relative orientation, vibrational energy, and chemical composition of the fragments is used to estimate the density of states of the system, which is continuously updated as the random sampling populates individual states. The validity and usefulness of the method is demonstrated by applying it to evaluate the caloric curve of a weakly bound rare gas cluster (Ar13), to interpret the fragmentation of highly excited small neutral and singly positively charged carbon clusters (Cn, n = 5,7,9 and Cn(+), n = 4,5) and to simulate the mass spectrum of the acetylene molecule (C2H2).

  3. Soluble M3 proteins of murine gammaherpesviruses 68 and 72 expressed in Escherichia coli: analysis of chemokine-binding properties.

    Science.gov (United States)

    Matúšková, R; Pančík, P; Štibrániová, I; Belvončíková, P; Režuchová, I; Kúdelová, M

    2015-12-01

    M3 protein of murine gammaherpesvirus 68 (MHV-68) was identified as a viral chemokine-binding protein 3 (vCKBP-3) capable to bind a broad spectrum of chemokines and their receptors. During both acute and latent infection MHV-68 M3 protein provides a selective advantage for the virus by inhibiting the antiviral and inflammatory response. A unique mutation Asp307Gly was identified in the M3 protein of murine gammaherpesvirus 72 (MHV-72), localized near chemokine-binding domain. Study on chemokine-binding properties of MHV-72 M3 protein purified from medium of infected cells implied reduced binding to some chemokines when compared to MHV-68 M3 protein. It was suggested that the mutation in the M3 protein might be involved in the attenuation of immune response to infection with MHV-72. Recently, Escherichia coli cells were used to prepare native recombinant M3 proteins of murine gammaherpesviruses 68 and 72 (Pančík et al., 2013). In this study, we assessed the chemokine-binding properties of three M3 proteins prepared in E. coli Rosetta-gami 2 (DE3) cells, the full length M3 protein of both MHV-68 and MHV-72 and MHV-68 M3 protein truncated in the signal sequence (the first 24 aa). They all displayed binding activity to human chemokines CCL5 (RANTES), CXCL8 (IL-8), and CCL3 (MIP-1α). The truncated MHV-68 M3 protein had more than twenty times reduced binding activity to CCL5, but only about five and three times reduced binding to CXCL8 and CCL3 when compared to its full length counterpart. Binding of the full length MHV-72 M3 protein to all chemokines was reduced when compared to MHV-68 M3 protein. Its binding to CCL5 and CCL3 was reduced over ten and seven times. However, its binding to CXCL8 was only slightly reduced (64.8 vs 91.8%). These data implied the significance of the signal sequence and also of a single mutation (at aa 307) for efficient M3 protein binding to some chemokines.

  4. The BIOPAN experiment MARSTOX II of the FOTON M-3 mission

    Science.gov (United States)

    Rettberg, P.; Moeller, R.; Rabbow, E.; Panitz, C.; Horneck, G.; Meyer, C.; Lammer, H.; Douki, T.; Cadet, J.

    2008-09-01

    The experiment MARSTOX II on FOTON M-3 mission (September 14 - 26, 2007) was a further step in the study of the Responses of Organisms to the Martian Environment (ROME) which already started with first ground-based experiments in Mars simulation chambers and with the space experiment MARSTOX I, flown in 2005 in the ESA facility BIOPAN (Fig. 1) on FOTON M-2. The survivability of bacterial spores of B. subtilis, a well-characterized model system for highly resistant microorganisms, was investigated under the extreme environmental conditions as they exist on the surface of Mars. By use of exterrestrial UV radiation and cut-off filters the photoprotection and potential UV-phototoxicity of different minerals of the Martian soil were investigated.In MARSTOX II two further aspects were addressed (i) the influence of different concentrations of dust in the Martian atmosphere, which change the solar irradiance on the surface significantly compared to vacuum exposure under the same conditions (experiment parts 'DUST MARS' and 'DUST SPACE'), and (ii) the survivability of spores under martian atmosphere and pressure exposed to a mars-like spectral irradiance compared to vacuum exposure under the same conditions (experiment parts 'MIXED MARS' and 'MIXED SPACE') (Fig. 2 and 3). After exposure to space during the FOTON M-3 mission the sample analysis was performed at CEA in Grenoble, F, and at DLR in Cologne, D, together with parallel samples from the corresponding ground control experiment performed in the space simulation facilities at DLR. As biological endpoints in these investigations survival and UV-induced DNAphotoproducts were analysed.From the results of MARSTOX II the following conclusions can be drawn: (i) Spores mixed with martian soil analogue are protected only to a low degree against UV radiation. The protective effect of several defined layers of spores mixed with Martian soil analogue were quantified. (ii) The two investigated martian soil analogues, MRS07 (47

  5. CH5M3D: an HTML5 program for creating 3D molecular structures

    Science.gov (United States)

    2013-01-01

    Background While a number of programs and web-based applications are available for the interactive display of 3-dimensional molecular structures, few of these provide the ability to edit these structures. For this reason, we have developed a library written in JavaScript to allow for the simple creation of web-based applications that should run on any browser capable of rendering HTML5 web pages. While our primary interest in developing this application was for educational use, it may also prove useful to researchers who want a light-weight application for viewing and editing small molecular structures. Results Molecular compounds are drawn on the HTML5 Canvas element, with the JavaScript code making use of standard techniques to allow display of three-dimensional structures on a two-dimensional canvas. Information about the structure (bond lengths, bond angles, and dihedral angles) can be obtained using a mouse or other pointing device. Both atoms and bonds can be added or deleted, and rotation about bonds is allowed. Routines are provided to read structures either from the web server or from the user’s computer, and creation of galleries of structures can be accomplished with only a few lines of code. Documentation and examples are provided to demonstrate how users can access all of the molecular information for creation of web pages with more advanced features. Conclusions A light-weight (≈ 75 kb) JavaScript library has been made available that allows for the simple creation of web pages containing interactive 3-dimensional molecular structures. Although this library is designed to create web pages, a web server is not required. Installation on a web server is straightforward and does not require any server-side modules or special permissions. The ch5m3d.js library has been released under the GNU GPL version 3 open-source license and is available from http://sourceforge.net/projects/ch5m3d/. PMID:24246004

  6. 75 FR 70350 - Liberty Natural Gas LLC, Liberty Liquefied Natural Gas (LNG) Deepwater Port License Application

    Science.gov (United States)

    2010-11-17

    ... Maritime Administration Liberty Natural Gas LLC, Liberty Liquefied Natural Gas (LNG) Deepwater Port License... receive and transfer natural gas from purpose-build LNG regasification vessels (LNGRVs) with a total cargo tank capacity of approximately 145,000 m\\3\\. The vessels would be equipped to vaporize LNG cargo...

  7. The Swift/UVOT Stars Survey. II. RR Lyrae Stars in M 3 and M 15

    CERN Document Server

    Siegel, Michael H; Balzer, Benjamin G; Hagen, Lea M Z

    2015-01-01

    We present the first results of an near-ultraviolet (NUV) survey of RR Lyrae stars from the Ultraviolet Optical Telescope (UVOT) aboard the Swift Gamma-Ray Burst Mission. It is well-established that RR Lyrae have large amplitudes in the far- and near-ultraviolet. We have used UVOT's unique wide-field NUV imaging capability to perform the first systematic NUV survey of variable stars in the Galactic globular clusters M 3 and M 15. We identify 280 variable stars, comprising 275 RR Lyrae, two anomalous Cepheids, one classical Cepheid, one SX Phoenicis star and one possible long-period or irregular variable. Only two of these are new discoveries. We compare our results to previous investigations and find excellent agreement in the periods with significantly larger amplitudes in the NUV. We map out, for the first time, an NUV Bailey diagram from globular clusters, showing the usual loci for fundamental mode RRab and first overtone RRc pulsators. We show the unique sensitivity of NUV photometry to both the temperat...

  8. THE SWIFT UVOT STARS SURVEY. II. RR LYRAE STARS IN M3 AND M15

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, Michael H.; Porterfield, Blair L.; Balzer, Benjamin G.; Hagen, Lea M. Z., E-mail: siegel@astro.psu.edu, E-mail: blp14@psu.edu, E-mail: bgb5080@psu.edu, E-mail: lea.zernow.hagen@gmail.com [Pennsylvania State University, Department of Astronomy, 525 Davey Laboratory, University Park, PA 16802 (United States)

    2015-10-15

    We present the first results of a near-ultraviolet (NUV) survey of RR Lyrae stars from the Ultraviolet Optical Telescope (UVOT) on board the Swift Gamma-ray Burst Mission. It is well-established that RR Lyrae stars have large amplitudes in the far- and near-ultraviolet. We have used UVOT’s unique wide-field NUV imaging capability to perform the first systematic NUV survey of variable stars in the Galactic globular clusters M3 and M15. We identify 280 variable stars, comprised of 275 RR Lyrae, 2 anomalous Cepheids, 1 classical Cepheid, 1 SX Phoenicis star, and 1 possible long-period or irregular variable. Only two of these are new discoveries. We compare our results to previous investigations and find excellent agreement in the periods with significantly larger amplitudes in the NUV. We map out, for the first time, an NUV Bailey diagram from globular clusters, showing the usual loci for fundamental mode RRab and first overtone RRc pulsators. We show the unique sensitivity of NUV photometry to both the temperatures and the surface gravities of RR Lyrae stars. Finally, we show evidence of an NUV period–metallicity–luminosity relationship. Future investigations will further examine the dependence of NUV pulsation parameters on metallicity and Oosterhoff classification.

  9. Molecular Modeling of the M3 Acetylcholine Muscarinic Receptor and Its Binding Site

    Science.gov (United States)

    Martinez-Archundia, Marlet; Cordomi, Arnau; Garriga, Pere; Perez, Juan J.

    2012-01-01

    The present study reports the results of a combined computational and site mutagenesis study designed to provide new insights into the orthosteric binding site of the human M3 muscarinic acetylcholine receptor. For this purpose a three-dimensional structure of the receptor at atomic resolution was built by homology modeling, using the crystallographic structure of bovine rhodopsin as a template. Then, the antagonist N-methylscopolamine was docked in the model and subsequently embedded in a lipid bilayer for its refinement using molecular dynamics simulations. Two different lipid bilayer compositions were studied: one component palmitoyl-oleyl phosphatidylcholine (POPC) and two-component palmitoyl-oleyl phosphatidylcholine/palmitoyl-oleyl phosphatidylserine (POPC-POPS). Analysis of the results suggested that residues F222 and T235 may contribute to the ligand-receptor recognition. Accordingly, alanine mutants at positions 222 and 235 were constructed, expressed, and their binding properties determined. The results confirmed the role of these residues in modulating the binding affinity of the ligand. PMID:22500107

  10. [Gerbil experiment in the flight of spacecraft "Foton-M3"].

    Science.gov (United States)

    Il'in, E A; Smirnov, I A; Soldatov, P E; Orlov, O I

    2009-01-01

    The 12-d mission of Russian spacecraft Foton-M3 in September of 2007 was used as an opportunity to fly an experiment with 12 male gerbils (Meriones unguiculatus) at the age of 4-4.5 mos. and mean body weight of 51.6 grams. Considering the behavior pattern of these animals, selection and preparation of the experimental groups continued in the course of 2.5-3 months. The flight animals were contained in module Kontur-L outfitted with a self-sustained system of life support. In orbit, the animals received a palletized hydrogenous feed. The physiological and hygienic parameters of the gerbil environment during the flight complied with the official standards. Analysis of the video recorded behavior of animals in microgravity showed that virtually throughout the flight they moved chaotically along the cage never attempting to stabilize position catching at the wire netting of the cage. The animals were decapitated in 21-24 hours after landing. The investigations showed that structural and functional changes in gerbil organs and tissues were generally of the same type as in rats following fights of comparable duration. However, some differences between the animals were attributed to the specifics of water turnover in gerbils.

  11. [Handling and maintenance of gerbils during the spacecraft Foton-M3 mission].

    Science.gov (United States)

    Soldatov, P E; Smirnov, I A; Il'in, E A; Gur'eva, T S; Mednikova, E I; Smolenskaia, T S; Lysenko, L A; Kaminskaia, E V

    2009-01-01

    Pressurized low-sized module Kontur with an independent life support system (LSS) was developed by the Institute of Biomedical Problems cooperatively with the Special Design Bureau of Experimental Equipment to house gerbils (Meriones unguiculatus) aboard robotic technology-purpose spacecraft. Design of the module precludes pollution of the environment The fully equipped module weighs 69 kg; average daily power consumption is 62 watts. The environmental parameters for 12 animals flown on Foton-M3 in the period of September 14-26, 2007 were controlled within the following ranges: pO2 - 143-156 mm Hg, (mean 150 mm Hg), pCO2 - 0.76 mm Hg maximum (mean 0.64 mm Hg), temperature - 23-28 degrees C (mean 26.7 degrees C), relative humidity - 29% and 57% at the beginning and end of the flight, respectively (mean 39%). The animals consumed the palletized food prepared of natural products with a moisture content of approx. 20%. The day-night periods were 12 hrs. long. The daytime video recording of the animals went on continuously in the throughout the flight. The experiment showed that the module meets the requirements of experiments with mammals aboard returnable robotic spacecraft and piloted space stations. At the moment, the model is being redesigned for a 30-day BION-M1 mission.

  12. [Glycogen content in gerbil's liver following the spacecraft Foton-M3 mission].

    Science.gov (United States)

    Atiakshin, D A; Bykov, E G; Il'in, E A; Pashkov, A N

    2009-01-01

    Glycogen cytochemistry and distribution in hepatocytes of the classic liver lobules were studied in three groups of gerbils Meriones unguiculatus: vivarium, synchronous control and flown in the 12-d Foton-M3 mission. The control animals were shown to have the central glycogen distribution with a large pool of polysaccharides found in hepatocytes of the pericentral and intermediate lobules and a small pool in the periportal area. Glycogen in hepatocyte plasm was within the physiological norm in the alpha- and beta-granules, typically localized on the cell periphery. Exposure to the spaceflight conditions decreased significantly glycogen concentrations in each functional region of the hepatic lobules and reduced the gradient of polysaccharide distribution from the portal triads toward the central vein. In parallel, high glycogen heterogeneity formed in adjacent hepatocytes and loci. The presence of glycosomes evidenced disturbance of carbohydrates metabolism. In addition, intracellular topography of glycogen granules in cytoplasm was altered. Trends of glycogen in gerbils of the synchronous control were similar to the space flown animals but much less pronounced.

  13. [Jejunum intersticium in mongolian gerbils after the flight on spacecraft Foton-M3].

    Science.gov (United States)

    Atiashkin, D A; Bykov, É G; Il'in, E A; Pashkov, A N

    2012-01-01

    Methods of light optical microscopy were used to explore histoarchitectonics, topography and tinctorial properties of the extracellular phase of fibers of jejunum wall intersticium in Mongolian gerbils following 12-day orbital flight aboard Foton-M3, ground-based simulation of the spaceflight factors in the KONTUR-L facility, and in the group of biological control Postflight destructive changes were found in reticulin fibers (type-III collagen) of villi stroma, intercrypt intersticium and submucosa. Local acidophilia and fiber homogenization formed in type I collagen present in the intestinal subserous layer, muscular layers endomysium and submucose against the background of progressing edema and arterial, venous plethora and lymphostasis. Elastic component of the intersticium was disarranged in the structures of internal elastic membrane of submucous vessels, fragmented and partly reduced. Simulation of the orbital factors, except for microgravity, in the KONTUR-L facility called forth similar, although less often and diffuse, changes in intersticium fibers. The results of examination of intestinal intersticium fibers in the vivarium control gerbils discovered expressed species characters that should be taken into account by investigators, especially when comparing with data obtained from other animal species.

  14. [Rna content of gerbil hepatocytes after the flight aboard space platform Foton-M3].

    Science.gov (United States)

    Atiashkin, D A; Bykov, E G; Il'in, E A; Pashkov, A N

    2010-01-01

    The paper compares and contrasts the results of measuring the hepatocyte cytoplasm area and RNA content in 35 gerbils in three series of experiments, i.e. the vivarium control, modeled space flight (synchronous control) and exposure to the factors of 12-d Foton-M3 orbital flight. Central, intermediate and peripheral zones of hepatic lobes were subjected to histological and histochemical analyses to measure the hepatocyte cytoplasm area; the RNA content was determined from the level of cytoplasm basophilia after azure staining. Cytometric and cytophotometric investigations were performed using image analyzer Video-7-Test-Morpho. In the vivarium animals, hepatocytes with the largest cytoplasm localized predominantly in the intermediate and central zones of the lobes. Judging from the results of microdensitometry, the RNA content was particularly high in binucleate hepatocytes of the intermediate zone. In the synchronous control, hepatocytes tended to grow in size, in the peripheral zone specifically, whereas RNA content was largely equal no matter hepatocyte topography. After space flight, cytoplasm enlargement transcended this process in the vivarium animals. The cytoplasm RNA content along the entire liver parenchyma made a significant decrease equally as compared with the vivarium and synchronous control animals.

  15. Molecular Modeling of the M3 Acetylcholine Muscarinic Receptor and Its Binding Site

    Directory of Open Access Journals (Sweden)

    Marlet Martinez-Archundia

    2012-01-01

    Full Text Available The present study reports the results of a combined computational and site mutagenesis study designed to provide new insights into the orthosteric binding site of the human M3 muscarinic acetylcholine receptor. For this purpose a three-dimensional structure of the receptor at atomic resolution was built by homology modeling, using the crystallographic structure of bovine rhodopsin as a template. Then, the antagonist N-methylscopolamine was docked in the model and subsequently embedded in a lipid bilayer for its refinement using molecular dynamics simulations. Two different lipid bilayer compositions were studied: one component palmitoyl-oleyl phosphatidylcholine (POPC and two-component palmitoyl-oleyl phosphatidylcholine/palmitoyl-oleyl phosphatidylserine (POPC-POPS. Analysis of the results suggested that residues F222 and T235 may contribute to the ligand-receptor recognition. Accordingly, alanine mutants at positions 222 and 235 were constructed, expressed, and their binding properties determined. The results confirmed the role of these residues in modulating the binding affinity of the ligand.

  16. [2 fatal cases of acute myeloid leukemia (M3, M4) during pregnancy].

    Science.gov (United States)

    Aragona, M; Asmundo, A

    1995-04-01

    Two cases of unexpected post-partum death of women with acute leukemia are described. In the first case (1st pregnancy) the diagnosis (acute promyelocytic leukemia: M3) was performed one week before delivery and death occurred 3 days later, because of hemorrhagic and renal DIC complication. Since one month before hospitalization, laboratory exams indicated a serious hematological pathology and no further exams were carried out by the physicians, elements of professional fault were recognized in them, considering that because of the diagnostic omission it was impossible to make an early diagnosis and thus perform to specific therapy, adopted only in the terminal phase. This specific therapy is able to determine remission from most cases of acute promyelocytic leukemia. In the second case (2nd pregnancy) the diagnosis (acute myelomonocytic leukemia: M4) was performed only postmortem because, during the whole pregnancy, no signs of disease were evident. After a few hours from the spontaneous delivery, death occurred as a result of an intractable + hemorrhagic syndrome caused by primary hyperfibrinolysis and repeated episodes of cardiac arrest, without possibility of recognizing it. The medical procedures for this case, both throughout pregnancy and terminal phases, appeared free of censure.

  17. Experimental Study of Ultralight (<300 kg/m3 Foamed Concrete

    Directory of Open Access Journals (Sweden)

    Xianjun Tan

    2014-01-01

    Full Text Available A type of ultralight (<300 kg/m3 foamed concrete (FC, which can be used as a new energy-conservation and environmental-protection building material and is particularly suitable for the thermal-insulation engineering of building external walls, was produced. The influences of different mixing amounts of fly ash, fly ash activator, WC (WC ratio, and foaming agent (FA on the compressive strength of FC were reported. The experimental study indicated that (1 the addition of fly ash reduced the strength of the FC and that the appropriate mixing amount of fly ash in this ultralight FC system should not exceed 45%; (2 with the increasing of fly ash activator, the strength of the FC sample is notably enhanced and the appropriate mixing amount of fly ash activator is 2.5%; (3 the optimized proportion of WC ratio is 0.45, and the FC that was produced according to this proportion has relatively high compressive strength; (4 by increasing the mixing amount of FA, the compressive strength of the FC notably decreases, and the optimal mixing amount of FA in this experiment is 3.5%.

  18. Discovery of a wide planetary-mass companion to the young M3 star GU PSC

    Energy Technology Data Exchange (ETDEWEB)

    Naud, Marie-Eve; Artigau, Étienne; Malo, Lison; Albert, Loïc; Doyon, René; Lafrenière, David; Gagné, Jonathan; Boucher, Anne [Département de physique and Observatoire du Mont-Mégantic, Université de Montréal, Montréal H3C 3J7 (Canada); Saumon, Didier [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Morley, Caroline V. [Department of Astronomy and Astrophysics, University of California, Santa Cruz, CA 95064 (United States); Allard, France; Homeier, Derek [Centre de Recherche Astrophysique de Lyon, UMR 5574 CNRS, Université de Lyon, École Normale Supérieure de Lyon, 46 Allée d' Italie, F-69364 Lyon Cedex 07 (France); Beichman, Charles A.; Gelino, Christopher R., E-mail: naud@astro.umontreal.ca [Infrared Processing and Analysis Center, MS 100-22, California Institute of Technology, Pasadena, CA 91125 (United States)

    2014-05-20

    We present the discovery of a comoving planetary-mass companion ∼42'' (∼2000 AU) from a young M3 star, GU Psc, a likely member of the young AB Doradus Moving Group (ABDMG). The companion was first identified via its distinctively red i – z color (>3.5) through a survey made with Gemini-S/GMOS. Follow-up Canada-France-Hawaii Telescope/WIRCam near-infrared (NIR) imaging, Gemini-N/GNIRS NIR spectroscopy and Wide-field Infrared Survey Explorer photometry indicate a spectral type of T3.5 ± 1 and reveal signs of low gravity which we attribute to youth. Keck/Adaptive Optics NIR observations did not resolve the companion as a binary. A comparison with atmosphere models indicates T {sub eff} = 1000-1100 K and log g = 4.5-5.0. Based on evolution models, this temperature corresponds to a mass of 9-13 M {sub Jup} for the age of ABDMG (70-130 Myr). The relatively well-constrained age of this companion and its very large angular separation to its host star will allow its thorough characterization and will make it a valuable comparison for planetary-mass companions that will be uncovered by forthcoming planet-finder instruments such as Gemini Planet Imager and SPHERE 9.

  19. Magnetic and dynamical photospheric disturbances observed during an M3.2 solar flare

    CERN Document Server

    Kuckein, C; Sainz, R Manso

    2015-01-01

    This letter reports on a set of full-Stokes spectropolarimetric observations in the near infrared He I 10830 A spectral region covering the pre-, flare, and post-flare phases of an M3.2 class solar flare. The flare originated on 2013 May 17 and belonged to active region NOAA 11748. We detected strong He I 10830 A emission in the flare. The red component of the He I triplet peaks at an intensity ratio to the continuum of about 1.86. During the flare, He I Stokes V is substantially larger and appears reversed compared to the usually larger Si I Stokes V profile. The photospheric Si I inversions of the four Stokes profiles reveal the following: (1) the magnetic field strength in the photosphere decreases or is even absent during the flare phase, as compared to the pre-flare phase. However, this decrease is not permanent. After the flare the magnetic field recovers its pre-flare configuration in a short time (i.e., in 30 minutes after the flare). (2) In the photosphere, the line-of-sight velocities show a regular...

  20. GRAVITAS : General Relativistic Astrophysics VIa Timing And Spectroscopy: An ESA M3 mission proposal

    CERN Document Server

    Nandra, Kirpal; Fabian, Andy; Strueder, Lothar; Willingale, Richard; Watson, Mike; Jonker, Peter; Kunieda, Hideyo; Miniutti, Giovanni; Motch, Christian; Predehl, Peter

    2011-01-01

    GRAVITAS is an X-ray observatory, designed and optimised to address the ESA Cosmic Vision theme of "Matter under extreme conditions". It was submitted as a response to the call for M3 mission proposals. The concept centres around an X-ray telescope of unprecedented effective area, which will focus radiation emitted from close to the event horizon of black holes or the surface of neutron stars. To reveal the nature and behaviour of matter in the most extreme astrophysical environments, GRAVITAS targets a key feature in the X-ray spectra of compact objects: the iron Kalpha line at ~6.5 keV. The energy, profile, and variability of this emission line, and the properties of the surrounding continuum emission, shaped by General Relativity (GR) effects, provide a unique probe of gravity in its strong field limit. Among its prime targets are hundreds of supermassive black holes in bright Active Galactic Nuclei (AGN), which form the perfect laboratory to help understand the physical processes behind black hole growth....

  1. Overtone and multi-mode RR Lyrae stars in the globular cluster M3

    CERN Document Server

    Jurcsik, J; Hajdu, G; Sódor, Á; Nuspl, J; Kolenberg, K; Fűrész, G; Moór, A; Kun, E; Pál, A; Bakos, J; Kelemen, J; Kovács, T; Kriskovics, L; Sárneczky, K; Szalai, T; Szing, A; Vida, K

    2015-01-01

    The overtone and multi-mode RR Lyrae stars in the globular cluster M3 are studied using a 200-d long, $B,V$ and $I_{\\mathrm C}$ time-series photometry obtained in 2012. 70\\% of the 52 overtone variables observed show some kind of multi-periodicity (additional frequency at ${f_{0.61}}={f_{\\mathrm {1O}}}/0.61$ frequency ratio, Blazhko effect, double/multi-mode pulsation, period doubling). A signal at 0.587 frequency ratio to the fundamental-mode frequency is detected in the double-mode star, V13, which may be identified as the second radial overtone mode. If this mode-identification is correct, than V13 is the first RR Lyrae star showing triple-mode pulsation of the first three radial modes. Either the Blazhko effect or the ${f_{0.61}}$ frequency (or both of these phenomena) appear in 7 double-mode stars. The $P_{\\mathrm{1O}}/P_{\\mathrm{F}}$ period ratio of RRd stars showing the Blazhko effect are anomalous. A displacement of the main frequency component at the fundamental-mode with the value of modulation freq...

  2. Discovery of a wide planetary-mass companion to the young M3 star GU Psc

    CERN Document Server

    Naud, Marie-Eve; Malo, Lison; Albert, Loïc; Doyon, René; Lafrenière, David; Gagné, Jonathan; Saumon, Didier; Morley, Caroline V; Allard, France; Homeier, Derek; Beichman, Charles A; Gelino, Christopher R; Boucher, Anne

    2014-01-01

    We present the discovery of a co-moving planetary-mass companion ~42" (~2000 AU) from a young M3 star, GU Psc, likely member of the young AB Doradus Moving Group (ABDMG). The companion was first identified via its distinctively red i - z color (> 3.5) through a survey made with Gemini-S/GMOS. Follow-up Canada-France-Hawaii Telescope/WIRCam near-infrared (NIR) imaging, Gemini-N/GNIRS NIR spectroscopy and Wide-field Infrared Survey Explorer photometry indicate a spectral type of T3.5+-1 and reveal signs of low gravity which we attribute to youth. Keck/Adaptive Optics NIR observations did not resolve the companion as a binary. A comparison with atmosphere models indicates Teff = 1000-1100 K and logg = 4.5-5.0. Based on evolution models, this temperature corresponds to a mass of 9-13 MJup for the age of ABDMG (70-130 Myr). The relatively well-constrained age of this companion and its very large angular separation to its host star will allow its thorough characterization and will make it a valuable comparison for ...

  3. Comparison of human and porcine gastric clasp and sling fiber contraction by M2 and M3 muscarinic receptors.

    Science.gov (United States)

    Vegesna, Anil K; Braverman, Alan S; Miller, Larry S; Tallarida, Ronald J; Tiwana, Mansoor I; Khayyam, Umar; Ruggieri, Michael R

    2010-04-01

    To compare the gastroesophageal junction of the human with the pig, M(2) and M(3) receptor densities and the potencies of M(2) and M(3) muscarinic receptor subtype selective antagonists were determined in gastric clasp and sling smooth muscle fibers. Total muscarinic and M(2) receptors are higher in pig than human clasp and sling fibers. M(3) receptors are higher in human compared with pig sling fibers but lower in human compared with pig clasp fibers. Clasp fibers have fewer M(3) receptors than sling fibers in both humans and pigs. Similar to human clasp fibers, pig clasp fibers contract significantly less than pig sling fibers. Analysis of the methoctramine Schild plot suggests that M(2) receptors are involved in mediating contraction in pig clasp and sling fibers. Darifenacin potency suggests that M(3) receptors mediate contraction in pig sling fibers and that M(2) and M(3) receptors mediate contraction in pig clasp fibers. Taken together, the data suggest that both M(2) and M(3) muscarinic receptors mediate the contraction in both pig clasp and sling fibers similar to human clasp and sling fibers.

  4. MAGNETIC AND DYNAMICAL PHOTOSPHERIC DISTURBANCES OBSERVED DURING AN M3.2 SOLAR FLARE

    Energy Technology Data Exchange (ETDEWEB)

    Kuckein, C. [Leibniz-Institut für Astrophysik Potsdam (AIP), An der Sternwarte 16, D-14482, Potsdam (Germany); Collados, M.; Sainz, R. Manso, E-mail: ckuckein@aip.de [Instituto de Astrofísica de Canarias (IAC), Vía Láctea s/n, E-38205, La Laguna, Tenerife (Spain)

    2015-02-01

    This Letter reports on a set of full-Stokes spectropolarimetric observations in the near-infrared He i 10830 Å spectral region covering the pre-flare, flare, and post-flare phases of an M3.2 class solar flare. The flare originated on 2013 May 17 and belonged to active region NOAA 11748. We detected strong He i 10830 Å emission in the flare. The red component of the He i triplet peaks at an intensity ratio to the continuum of about 1.86. During the flare, He i Stokes V is substantially larger and appears reversed compared to the usually larger Si i Stokes V profile. The photospheric Si i inversions of the four Stokes profiles reveal the following: (1) the magnetic field strength in the photosphere decreases or is even absent during the flare phase, as compared to the pre-flare phase. However, this decrease is not permanent. After the flare, the magnetic field recovers its pre-flare configuration in a short time (i.e., 30 minutes after the flare). (2) In the photosphere, the line of sight velocities show a regular granular up- and downflow pattern before the flare erupts. During the flare, upflows (blueshifts) dominate the area where the flare is produced. Evaporation rates of ∼10{sup −3} and ∼10{sup −4} g cm{sup −2} s{sup −1} have been derived in the deep and high photosphere, respectively, capable of increasing the chromospheric density by a factor of two in about 400 s.

  5. Signal transduction by M3 muscarinic acetylcholine receptor in prostate cancer

    Science.gov (United States)

    GUO, LIQIANG; LIU, YUQIANG; DING, ZHIBO; SUN, WENDONG; YUAN, MINGZHEN

    2016-01-01

    The present study aimed to investigate the potential mechanisms used during signal transduction by M3 muscarinic acetylcholine receptor (CHRM3) in prostate cancer. The microarray datasets of GSE3325, including 5 clinically localized primary prostate cancers and 4 benign prostate tissues, were downloaded from the Gene Expression Omnibus database. The differentially-expressed genes (DEGs) in primary prostate cancer tissues compared with benign controls were screened using the Limma package. Gene Ontology and pathway enrichment analyses were performed using the Database for Annotation Visualization and Integrated Discovery. Next, a protein-protein interaction (PPI) network was constructed. Additionally, microRNAs (miRNAs) associated with DEGs were predicted and miRNA-target DEG analysis was performed using a Web-based Gene Set Analysis Toolkit. Finally, the PPI network and the miRNA-target DEG network were integrated using Cytoscape. In total, 224 DEGs were screened in the prostate cancer tissues, including 113 upregulated and 111 downregulated genes. CHRM3 and epidermal growth factor (EGF) were enriched in the regulation of the actin cytoskeleton. EGF and v-myc avian myelocytomatosis viral oncogene homolog (Myc) were enriched in the mitogen-activated protein kinase (MAPK) signaling pathway. EGF with the highest degree of connectivity was the hub node in the PPI network, and miR-34b could interact with Myc directly in the miRNA-target DEG network. EGF and Myc may exhibit significant roles in the progression of prostate cancer via regulation of the actin cytoskeleton and the MAPK signaling pathway. CHRM3 may activate these two pathways in prostate cancer progression. Thus, these two key factors and pathways may be crucial mechanisms during signal transduction by CHRM3 in prostate cancer. PMID:26870222

  6. Simulation of VANAM M3 test using MELCOR 1.8.3

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Sung Won; Kim, Hee Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-07-01

    A standard problem is defined as a comparison between experimental and analytical results in the field of reactor safety research. The detailed comparison of the data permits conclusions for the reliability and precision of computer simulations of postulated accidents and contributions to the development and improvement of reactor safety computer codes. Following a suggestion of the Federal Republic of Germany, the OECD-CSNI agreed to offer the experiment VANAM M3 at the Battelle Model Containment (BMC), an experiment on thermohydraulics and aerosol behavior in a containment, as International Standard Problem No. 37 (ISP 37). The general objectives of the ISP 37 are to analyse the thermohydraulics of a containment atmosphere and the distribution and settlement of aerosol after a high pressure path with depressurization by pressurizer relief valve discharge. Steam condensation at the aerosol particles(condensation in volume) is enhanced by the hygroscopic properties of the aerosol materials, even in case of limited steam supply. The originally small, low-density NaOH particles are converted to solution droplets by steam condensation, the increasing droplet mass significantly enhancing aerosol depletion by gravity settlement. As a result, higher depletion rate have been obtained for the NaOH aerosol than for the SnO{sub 2} aerosol in M2. The MELCOR code, version 1.8.3, has been used for the simulation of this experiment, and the results are compared with the results of other calculations at GRS. The objectives of this report are to contribute to the efficient use of MELCOR code and understanding of the aerosol behavior. 12 tabs., 19 figs., 11 refs. (Author).

  7. Agronomic Characterization of Wheat Mutants (Triticum aestivum of M3 Generation Planted in Sukabumi

    Directory of Open Access Journals (Sweden)

    Laela Sari

    2016-11-01

    Full Text Available The purpose of this study was to identify the selection criteria to obtain a superior mutant derived from the wheat plants of such varieties as Dewata, Selayar and Alibey, adaptive in medium land. The analysis of agronomic growth characters showed a significantly effect on a growth percentage of the initial growth (8 mutants, flowering time (1 mutant, panicle stem length (15 mutants, number of panicles (7 mutants, the number of grains per panicle (8 mutants, grain weight observed (8 mutants, grain weight per genotype (6 mutants, leaf area (2 mutants and leaf greenness (5 mutants. The effects on the characters of ripe time, harvest, panicle length and plant height were not significant. The mutants of Dewata, Selayar and Alibey could be selected based on the characters of panicle stem length, number of grains per panicle and grain weight per observation because these characters generated more mutants than the other characters. The correlation analysis between the characters of growth and yield components of wheat mutants showed that the number of grains per panicle was positively correlated with the grain weight observed, while the length of panicle stem was positively correlated with grain weight per genotype, number of panicles and leaf area. Hopefully some mutants produced could adapt to the tropical medium land, thus adding to the diversity of wheat germplasm in Indonesia, thereby reducing the import of wheat to Indonesia.How to CiteSari, L., Purwito, A., Sopandie, D., Purnamaningsih, R. & Sudarmonowati, E. (2016. Agronomic Characterization of Wheat Mutants (Triticum aestivum of M3 Generation Planted in Sukabumi. Biosaintifika: Journal of Biology & Biology Education, 8(3, 353-361. 

  8. Remote compositional analysis of lunar olivine-rich lithologies with Moon Mineralogy Mapper (M3) spectra

    Science.gov (United States)

    Isaacson, P.J.; Pieters, C.M.; Besse, S.; Clark, R.N.; Head, J.W.; Klima, R.L.; Mustard, J.F.; Petro, N.E.; Staid, M.I.; Sunshine, J.M.; Taylor, L.A.; Thaisen, K.G.; Tompkins, S.

    2011-01-01

    A systematic approach for deconvolving remotely sensed lunar olivine-rich visible to near-infrared (VNIR) reflectance spectra with the Modified Gaussian Model (MGM) is evaluated with Chandrayaan-1 Moon Mineralogy Mapper (M 3) spectra. Whereas earlier studies of laboratory reflectance spectra focused only on complications due to chromite inclusions in lunar olivines, we develop a systematic approach for addressing (through continuum removal) the prominent continuum slopes common to remotely sensed reflectance spectra of planetary surfaces. We have validated our continuum removal on a suite of laboratory reflectance spectra. Suites of olivine-dominated reflectance spectra from a small crater near Mare Moscoviense, the Copernicus central peak, Aristarchus, and the crater Marius in the Marius Hills were analyzed. Spectral diversity was detected in visual evaluation of the spectra and was quantified using the MGM. The MGM-derived band positions are used to estimate the olivine's composition in a relative sense. Spectra of olivines from Moscoviense exhibit diversity in their absorption features, and this diversity suggests some variation in olivine Fe/Mg content. Olivines from Copernicus are observed to be spectrally homogeneous and thus are predicted to be more compositionally homogeneous than those at Moscoviense but are of broadly similar composition to the Moscoviense olivines. Olivines from Aristarchus and Marius exhibit clear spectral differences from those at Moscoviense and Copernicus but also exhibit features that suggest contributions from other phases. If the various precautions discussed here are weighed carefully, the methods presented here can be used to make general predictions of absolute olivine composition (Fe/Mg content). Copyright ?? 2011 by the American Geophysical Union.

  9. Peculiarities of lens and tail regeneration detected in newts after spaceflight aboard Foton M3

    Science.gov (United States)

    Grigoryan, Eleonora N.; Almeida, Eduardo; Poplinskaya, Valentina; Novikova, Julia; Domaratskaya, Elena; Aleinikova, Karina; Souza, Kenneth; Skidmore, Mike; Grigoryan, Eleonora N.

    In September 2007 the joint, 12 day long experiment was carried out aboard Russian satellite Foton M3. The goal of the experiment was to study eye lens, tail and forelimb toe regeneration in adult 16 newts (Pl. waltl.) operated 10 days before taking-off. In spaceflight and synchronous ground control we used video recording, temperature and irradiation control, as well as constant availability of thymidine analog BrdU for its absorption via animals' skin. New techniques allowed us to analyze animals' behavior in hyperand microgravity periods of time, to take proper account of spaceflight factors, and measure accumulated pools of DNA-synthesizing cells in regenerating tissues. All tissue specimens obtained from animals were isolated in the day of landing and then prepared for morphological, immunochemical and molecular investigations. Synchronous control was shifted for two days and reproduced flight conditions except changes of gravity influence. As a result in flown animals as compared with synchronous ground control we found lens regeneration of 0.5-1 stage speeded up and an increased BrdU+ (S-phase) cell number in eye cornea, growth zone, limbus and newly forming lens. These features of regeneration were accompanied by an increase of FGF2 expression in eye growth zone and heat shock protein (HSP90) induction purely in retinal macroglial cells of regenerating eyes. Toe regeneration rate was equal and achieved the stage of accomplished healing of amputation area in both groups - "flown" and control animals. We found no essential differences in tail regeneration rate and tail regenerate sizes in the newts exposed to space and on ground. In both groups tail regeneration reached the stage IV-V when tail length and square were around 4.4 mm and 15.5 mm2, correspondingly. However we did observe remarkable changes of tail regenerate form and some of pigmentation. Computer morphometrical analysis showed that only in ground control animals the evident dorso

  10. Biodiesel Production from Selected Microalgae Strains and Determination of its Properties and Combustion Specific Characteristics

    Directory of Open Access Journals (Sweden)

    N. Kokkinos

    2015-11-01

    Full Text Available Biofuels are gaining importance as significant substitutes for the depleting fossil fuels. Recent focus is on microalgae as the third generation feedstock. In the present research work, two indigenous fresh water and two marine Chlorophyte strains have been cultivated successfully under laboratory conditions using commercial fertilizer (Nutrileaf 30-10-10, initial concentration=70 g/m3 as nutrient source. Gas chromatographic analysis data showed that microalgae biodiesel obtained from Chlorophyte strains biomass were composed of fatty acid methyl esters. The produced microalgae biodiesel achieved a range of 2.2 - 10.6 % total lipid content and an unsaturated FAME content between 49 mol% and 59 mol%. The iodine value, the cetane number, the cold filter plugging point, the oxidative stability as well as combustion specific characteristics of the final biodiesels were determined based on the compositions of the four microalgae strains. The calculated biodiesel properties compared then with the corresponding properties of biodiesel from known vegetable oils, from other algae strains and with the specifications in the EU (EN 14214 and US (ASTM D6751 standards. The derived biodiesels from indigenous Chlorophyte algae were significantly comparable in quality with other biodiesels.

  11. 1450 m^3 at 10^-9 Pa: One of the KATRIN Challenges

    Energy Technology Data Exchange (ETDEWEB)

    Christian Day; R. Gumbsheimer; W. Herz; J. Wolf; J. Bonn; R. Reid; G.R. Myneni

    2006-11-12

    The KATRIN project is a challenging experiment to measure the mass of the electron neutrino directly with a sensitivity of 0.2 eV. It is a next generation tritium beta-decay experiment scaling up the size and precision of previous experiments by an order of magnitude as well as the intensity of the tritium beta source. Ultrafine spectrometric analysis of the energy distribution of the decay electrons at their very endpoint of 18.57 keV is the key to derive the neutrino mass. This is provided by a high-resolution spectrometer of unique size (10 m in diameter, 22 m in length). To avoid any negative influence from residual gas, the spectrometer vessel is designed to UHV/XHV conditions (an ultimate total pressure of below 10{sup -9} Pa and a wall outgassing rate below 10{sup -13} Pam{sup 3}/scm{sup 2}). The paper shortly describes the experimental idea behind KATRIN. The emphasis will then be given to the pumping concept for how to achieve the target parameters and to the manufacturing of the spectrometer tank. Critical issues will also be discussed (surface treatment, welding, transportation). Finally, a description of the current status and an outlook on the overall KATRIN schedule completes the paper.

  12. Recovery Process for Lighter Hydrocarbon of Natural Gas in Liaohe Oilfield

    Institute of Scientific and Technical Information of China (English)

    Sun Fulu

    1995-01-01

    @@ Liaohe Oilfield, the third largest oilfield in China is richer in natural gas. Up to the end of 1993,the accumulative production of natural gas reached 31. 15 billion m3,among which associated gas occupied 19.83 billion m3. In the recent ten years ,more than ten of lighter hydrocarbon recovery units with different scales have been constructed. The following is describing the main process features about recovery units of 200 × 104m3/d,120× 104 m3/d and other small recovery units for lighter hydrocarbon of natural gas.

  13. SAP is required for the development of innate phenotype in H2-M3-restricted CD8+ T cells1

    Science.gov (United States)

    Bediako, Yaw; Bian, Yao; Zhang, Hong; Cho, Hoonsik; Stein, Paul L.; Wang, Chyung-Ru

    2012-01-01

    H2-M3-restricted T cells have a pre-activated surface phenotype, rapidly expand and produce cytokines upon stimulation and as such, are classified as innate T cells. Unlike most innate T cells, M3-restricted T cells also express CD8αβ co-receptors and a diverse TCR repertoire: hallmarks of conventional MHC Ia-restricted CD8+ T cells. Although iNKT cells are also innate lymphocytes, they are selected exclusively on hematopoietic cells (HC), while M3-restricted T cells can be selected on either hematopoietic or thymic epithelial cells (TEC). Moreover, their phenotypes differ depending on what cells mediate their selection. Though there is a clear correlation between selection on HC and development of innate phenotype, the underlying mechanism remains unclear. SAP is required for the development of iNKT cells and mediates signals from SLAM receptors that are exclusively expressed on HC. Based on their dual selection pathway, M3-restricted T cells present a unique model for studying the development of innate T cell phenotype. Using both polyclonal and transgenic mouse models we demonstrate that while M3-restricted T cells are capable of developing in the absence of SAP, SAP is required for HC-mediated selection, development of pre-activated phenotype and heightened effector functions of M3-restricted T cells. These findings are significant because they directly demonstrate the need for SAP in HC-mediated acquisition of innate T cell phenotype and suggest that due to their SAP-dependent HC-mediated selection, M3-restricted T cells develop a pre-activated phenotype and an intrinsic ability to proliferate faster upon stimulation, allowing for an important role in the early response to infection. PMID:23041566

  14. 1750m3高炉煤气除尘改造及TRT发电技术的应用%De-dusting System Improvement and TRT Technology Application on the 1750m3 Blast Furnaces

    Institute of Scientific and Technical Information of China (English)

    曹海刚; 许强

    2012-01-01

    介绍了济钢2座1750m3高炉煤气湿法改干法涂尘及TRT发电的主体设备、主要技术参数及取得的经济效益。%On the two 1750m3 blast furnaces of Jinan Iron and Steel Co., the wet BFG de-ducting system is replaced with the dry de-dusting system and the TRT generation unit is installed. These equipment and their technical data and economic benefits are presented.

  15. Horizontal-Branch Models and the Second-Parameter Effect. IV. The Case of M3 and Palomar 3

    CERN Document Server

    Catelan, M; Rood, R T

    2001-01-01

    We present a detailed analysis of the "second-parameter pair" of globular clusters M3 (NGC 5272) and Palomar 3. Our main results can be summarized as follows: i) The horizontal-branch (HB) morphology of M3 is significantly bluer in its inner regions (observed with the Hubble Space Telescope) than in the cluster outskirts (observed from the ground), i.e., M3 has an internal second parameter. Most plausibly the mass loss on the red giant branch (RGB) has been more efficient in the inner than in the outer regions of the cluster. ii) The dispersion in mass of the Pal 3 HB is found to be very small -- consistent with zero -- and we argue that this is unlikely to be due to a statistical fluctuation. It is this small mass dispersion that leads to the most apparent difference in the HB morphologies of M3 and Pal 3. iii) The relative HB types of M3 and Pal 3, as measured by mean colors or parameters involving the number of blue, variable, and red HB stars, can easily be accounted for by a fairly small difference in ag...

  16. Acetylcholine acts through M3 muscarinic receptor to activate the EGFR signaling and promotes gastric cancer cell proliferation

    Science.gov (United States)

    Yu, Huangfei; Xia, Hongwei; Tang, Qiulin; Xu, Huanji; Wei, Guoqing; Chen, Ying; Dai, Xinyu; Gong, Qiyong; Bi, Feng

    2017-01-01

    Acetylcholine (ACh), known as a neurotransmitter, regulates the functions of numerous fundamental central and peripheral nervous system. Recently, emerging evidences indicate that ACh also plays an important role in tumorigenesis. However, little is known about the role of ACh in gastric cancer. Here, we reported that ACh could be auto-synthesized and released from MKN45 and BGC823 gastric cancer cells. Exogenous ACh promoted cell proliferation in a does-dependent manner. The M3R antagonist 4-DAMP, but not M1R antagonist trihexyphenidyl and M2/4 R antagonist AFDX-116, could reverse the ACh-induced cell proliferation. Moreover, ACh, via M3R, activated the EGFR signaling to induce the phosphorylation of ERK1/2 and AKT, and blocking EGFR pathway by specific inhibitor AG1478 suppressed the ACh induced cell proliferation. Furthermore, the M3R antagonist 4-DAMP and darifenacin could markedly inhibit gastric tumor formation in vivo. 4-DAMP could also significantly enhance the cytotoxic activity of 5-Fu against the MKN45 and BGC823 cells, and induce the expression of apoptosis-related proteins such as Bax and Caspase-3. Together, these findings indicated that the autocrine ACh could act through M3R and the EGFR signaling to promote gastric cancer cells proliferation, targeting M3R or EGFR may provide us a potential therapeutic strategy for gastric cancer treatment. PMID:28102288

  17. Genetic environments of the transferable plasmid-mediated blaCTX-M-3 gene in Serratia marcescens isolates.

    Science.gov (United States)

    Chu, Pei-Yu; Peng, Chien-Fang

    2014-01-01

    In this study, genetic environments of the transferable plasmid-mediated blaCTX-M-3 gene were characterized among 14 isolates of cefotaxime-resistant Serratia marcescens using PCR and BLAST DNA sequence analysis. A total of 3 types of genetic architectures in the regions surrounding this blaCTX-M-3 gene were identified. Type I architecture was characterized by the presence of a complete insertion sequence of tnpA-ISEcp1, identified as interrupting a reverse IS26 sequence in the upstream region of the blaCTX-M-3 gene. A reverse-directional orf477 fragment was located downstream of the blaCTX-M-3 gene, which was in the same direction of the mucA gene. A common region containing the orf513 element was located upstream of the mucA gene. Moreover, a copy of the 3'-CS2 element was located immediately upstream of the orf513 element. A novel complex class 1 integron was characterized by the presence of the dfrA19 gene, which was flanked by two copies of class 1 integrons. This is the first report to describe the dfrA19 gene within a novel complex class 1 integron in S. marcescens isolates from Taiwan. This novel complex class 1 integron structure was located distantly upstream of the blaCTX-M-3 gene.

  18. Hypocholesterolemic effects of Kluyveromyces marxianus M3 isolated from Tibetan mushrooms on diet-induced hypercholesterolemia in rat

    Directory of Open Access Journals (Sweden)

    Yuanhong Xie

    2015-06-01

    Full Text Available To investigate the effects of Kluyveromyces marxianus M3 isolated from Tibetan mushrooms on diet-induced hypercholesterolemia in rats, female Wistar rats were fed a high-cholesterol diet (HCD for 28 d to generate hyperlipidemic models. Hyperlipidemic rats were assigned to four groups, which were individually treated with three different dosages of K. marxianus M3+HCD or physiological saline+HCD via oral gavage for 28 d. The total cholesterol (TC, triglycerides (TG, high-density lipoprotein cholesterol (HDL-C, and low-density lipoprotein cholesterol (LDL-C levels in the serum and liver of the rats were measured using commercially available enzyme kits. In addition, the liver morphology was also examined using hematoxylin and eosin staining and optical microscopy. According to our results, the serum and liver TC, TG, LDL-C levels and atherogenic index (AI were significantly decreased in rats orally administered K. marxianus M3 (p <0.01, and the HDL-C levels and anti atherogenic index (AAI were significantly increased (p <0.01 compared to the control group. Moreover, K. marxianus M3 treatment also reduced the build-up of lipid droplets in the liver and exhibited normal hepatocytes, suggesting a protective effect of K. marxianus M3 in hyperlipidemic rats.

  19. Hypocholesterolemic effects of Kluyveromyces marxianus M3 isolated from Tibetan mushrooms on diet-induced hypercholesterolemia in rat.

    Science.gov (United States)

    Xie, Yuanhong; Zhang, Hongxing; Liu, Hui; Xiong, Lixia; Gao, Xiuzhi; Jia, Hui; Lian, Zhengxing; Tong, Nengsheng; Han, Tao

    2015-06-01

    To investigate the effects of Kluyveromyces marxianus M3 isolated from Tibetan mushrooms on diet-induced hypercholesterolemia in rats, female Wistar rats were fed a high-cholesterol diet (HCD) for 28 d to generate hyperlipidemic models. Hyperlipidemic rats were assigned to four groups, which were individually treated with three different dosages of K. marxianus M3+HCD or physiological saline+HCD via oral gavage for 28 d. The total cholesterol (TC), triglycerides (TG), high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) levels in the serum and liver of the rats were measured using commercially available enzyme kits. In addition, the liver morphology was also examined using hematoxylin and eosin staining and optical microscopy. According to our results, the serum and liver TC, TG, LDL-C levels and atherogenic index (AI) were significantly decreased in rats orally administered K. marxianus M3 (p <0.01), and the HDL-C levels and anti atherogenic index (AAI) were significantly increased (p <0.01) compared to the control group. Moreover, K. marxianus M3 treatment also reduced the build-up of lipid droplets in the liver and exhibited normal hepatocytes, suggesting a protective effect of K. marxianus M3 in hyperlipidemic rats.

  20. Gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ok Ryong

    2004-01-15

    This book introduces gas turbine cycle explaining general thing of gas turbine, full gas turbine cycle, Ericson cycle and Brayton cycle, practical gas turbine cycle without pressure loss, multiaxial type gas turbine cycle and special gas turbine cycle, application of basic theory on a study on suction-cooling gas turbine cycle with turbo-refrigerating machine using the bleed air, and general performance characteristics of the suction-cooling gas turbine cycle combined with absorption-type refrigerating machine.

  1. EFFECT OF Nb ON THE MICROSTRUCTURE AND PROPERTIES OF SPRAY FORMED M3 HIGH SPEED STEEL%Nb对喷射成形M3型高速钢组织和性能的影响

    Institute of Scientific and Technical Information of China (English)

    于一鹏; 黄进峰; 崔华; 蔡元华; 张济山

    2012-01-01

    为了利用NbC的高硬度和高热稳定性,并避免其在凝固过程中的过分长大,采用喷射成形快速凝固技术制备了M3型高速钢和以Nb代V的M3型高速钢.利用SEM,EDX和XRD等方法研究了Nb对喷射成形M3型高速钢沉积态组织的影响;利用SRV高温摩擦磨损试验机和三维白光干涉表面形貌仪研究了Nb对喷射成形M3型高速钢摩擦磨损性能的影响.结果表明,用等原子分数的Nb替代V,可大幅增加沉积态中一次MC型碳化物,减少一次M2C型碳化物,同时由于喷射成形高冷速的作用,使得MC碳化物尺寸减小,分布更弥散;这些MC型碳化物的存在是M3型高速钢的抗磨粒磨损性能提高的主要原因,但其对抗氧化性能并无贡献,在高载荷时抗氧化剥落磨损能力增加不明显;Nb对提高M3高速钢回火稳定性也有明显的作用.%Spray forming with a short process chains has been proven to be a powerful tool for the production of high-alloyed materials. Niobium, as a strong former for the carbide, will mainly form primary MC carbides, such as NbC, which can be formed via the reaction between Nb and C atoms at the beginning of solidification, and it can act as the inoculants and refine the cast structure of steel which can mainly form primary MC carbides. M3 high speed steel with or without Nb addition were prepared via spray forming. The effect of Nb on the microstructure of spray formed M3 high speed steel was investigated by SEM, EDX and XRD methods; the friction performances of these two steels were studied by SRV high temperature tribometer and 3D white-light interfering profilometer. The results show that the amount of primary MC carbides can increase sharply while the reduction of the amount of primary M2C due to the substitution of 2% Nb for 1% V (mass fraction) in M3 high speed steel. For the high cooling rate during the spray forming, the primary MC carbides can be refined and dispersed. Large number of primary MC carbides

  2. High temperature EPR study of the M3Fe4V6O24 (M = Cu, Zn, Mg and Mn

    Directory of Open Access Journals (Sweden)

    Guskos Niko

    2016-09-01

    Full Text Available Electron paramagnetic resonance (EPR spectra of M3Fe4V6O24 (M = Cu, Zn, Mg and Mn compounds in high temperature range (293 K to 493 K have been investigated. The role of magnetic (Cu, Mn and non-magnetic (Zn, Mg ions in M3Fe4V6O24 structure in formation of magnetic resonance spectra was studied. Temperature dependence of EPR parameters: resonance field, linewidth and integrated intensity were examined. Similarities and differences in temperature behavior of these parameters has been discussed in terms of different relaxation mechanisms and magnetic interactions in the spin systems. An important role of additional magnetic ions (M = Mn or Cu in the M3Fe4V6O24 structure has been identified and its consequences considered.

  3. Exploration Trend of Large Gas Fields in China

    Institute of Scientific and Technical Information of China (English)

    Li Jingming; Wei Guoqi; Zhao Qun; Li Xiaojun

    2008-01-01

    @@ China has abundant natural gas resources with low exploration level. The discovery rate of resources is 10% on the average, boasting a great potential. By the end of 2006, the ascertained geological gas reserves in China has amounted to 5.4×1012m3, among which 9 gas fields has 1000×108m3 of ascertained geological reserves or more.The "large gas fields" are referred to those gas fields with recoverable reserves exceeding 85 billion cubic meters.Since the Sixth Five-Year Plan, China's gas industry has developed rapidly and gas reserve and output has witnessed a substantial increase, in which the discovery of large gas fields has played a very important role. With the progress of technology, more gas resources will be discovered with gas reserves growing rapidly in China.

  4. Expression of the M3 Muscarinic Receptor on Orexin Neurons that Project to the Rostral Ventrolateral Medulla.

    Science.gov (United States)

    Dai, Yu-Wen E; Lee, Yen-Hsien; Chen, Jennifer Y S; Lin, Yen-Kuang; Hwang, Ling-Ling

    2016-05-01

    Activation of central cholinergic receptors causes a pressor response in rats, and the hypothalamus is important for this response. Projections from hypothalamic orexin neurons to the rostral ventrolateral medulla (RVLM) are involved in sympatho-excitation of the cardiovascular system. A small population of orexin neurons is regulated by cholinergic inputs through M3 muscarinic acetylcholine receptor (M3 R). To elucidate whether the M3 R on orexin neurons is involved in cardiosympathetic regulation through the RVLM, we examined the presence of the M3 R on retrograde-labeled RVLM-projecting orexin neurons. The retrograde tracer was unilaterally injected into the RVLM. Within the hypothalamus, retrograde-labeled neurons were located predominantly ipsilateral to the injection side. In the anterior hypothalamus (-1.5 to -2.3 mm to the bregma), retrograde-labeled neurons were densely distributed in the paraventricular nuclei and scattered in the retrochiasmatic area. At -2.3 to -3.5 mm from the bregma, labeled neurons were located in the regions where orexin neurons were situated, that is, the tuberal lateral hypothalamic area, perifornical area, and dorsomedial nuclei. Very few retrograde-labeled neurons were observed in the hypothalamus at -3.5 to -4.5 mm from the bregma. About 19.5% ± 1.6% of RVLM-projecting neurons in the tuberal hypothalamus were orexinergic. The M3 R was present on 18.7% ± 3.0% of RVLM-projecting orexin neurons. Injection of a muscarinic agonist, oxotremorine, in the perifornical area resulted in a pressor response, which was attenuated by a pretreatment of atropine. We conclude that cholinergic inputs to orexin neurons may be involved in cardiosympathetic regulation through the M3 R on the orexin neurons that directly project to the RVLM.

  5. Study and Implementation of Floating-point Operations Based on Cortex-M3 Core%Cortex-M3内核浮点型运算的研究与实现

    Institute of Scientific and Technical Information of China (English)

    梅静静; 王申良

    2011-01-01

    通过分析Cortex-M3内核的结构与浮点型格式,充分利用Cortex-M3内核中的分支预测、单周期乘法、硬件除法等众多功能强大的特性,使用Thumb-2指令集实现了单精度浮点型的加、减、乘、除与比较运算,并给出了加减法运算的流程图和除法运算的源程序.%By analyzing the Cortex-M3 core structure and floating-point format, this paper uses the Thumb-2 instruction set to achieve addition, subtraction, multiplication, division and comparison operations of single-precision floating-point numbers, making full use of such powerful features of Cortex-M3 core as branch prediction, single-cycle multiplication and hardware division. The flow chart of addition and subtraction operations, as well as the source program of division operation, is provided.

  6. TREATMENT OF ABNORMAL TEMPERATURE RISE OF 1 800 m3 BF HEARTH%宣钢1800 m3高炉炉缸温度异常升高的处理

    Institute of Scientific and Technical Information of China (English)

    武建新; 匡祎

    2014-01-01

    This paper is aimed at the abnormal temperature rise of the 1800m3 BF hearth carbon bricks . Through correct diagnosis of furnace body corrosion condition , such measures are taken as increasing tita-nium load into the furnace , enhancing cooling intensity , enhancing tap -hole maintenance to guarantee tap-hole depth , changing field on time while tapping and so on , many hidden safety troubles are elimi-nated , and long-time and smooth operation of the 1 800 m3 BF is guaranteed .%针对2013年1月16日宣钢1800 m3高炉炉缸碳砖温度大幅度异常升高。通过正确诊断炉体侵蚀状况,采取提高入炉钛负荷、提高冷却强度、加强铁口维护保证铁口深度、出铁及时倒场等多项护炉措施,消除了安全隐患,保证了1800 m3高炉炉况长期稳定顺行。

  7. M3(Au,Ge)19 and M(3.25)(Au,Ge)18 (M = Ca, Yb): distinctive phase separations driven by configurational disorder in cubic YCd6-type derivatives.

    Science.gov (United States)

    Lin, Qisheng; Corbett, John D

    2010-05-17

    Exploratory syntheses in the M-Au-Ge (M = Ca, Yb) systems have led to the discovery of two cleanly separated non-stoichiometric phases M(3)Au(approximately 14.4)Ge(approximately 4.6) (I) and M(3.25)Au(approximately 12.7)Ge(approximately 5.3) (II). Single crystal X-ray studies reveal that both (space group Im3) feature body-centered-cubic packing of five-shell multiply endohedral clusters that resemble those in the parent YCd(6) (= Y(3)Cd(18)) and are akin to approximate phases in other quasicrystal systems. However, differences resulting from various disorders in these are distinctive. The innermost cluster in the M(3)Au(approximately 14.4)Ge(approximately 4.6) phase (I) remains a disordered tetrahedron, as in the YCd(6) parent. In contrast, its counterpart in the electron-richer M(3.25)Au(approximately 12.7)Ge(approximately 5.3) phase (II) is a "rattling" M atom. The structural differentiations between I and II exhibit strong correlations between lattice parameters, cluster sizes, particular site occupancies, and valence electron counts.

  8. Comparative study of AISI M3:2 high speed steel produced through different techniques of manufacturing; Estudo comparativo de acos rapidos AISI M3:2 produzidos por diferentes processos de fabricacao

    Energy Technology Data Exchange (ETDEWEB)

    Araujo Filho, Oscar Olimpio de

    2006-07-01

    In this work AISI M3:2 high speed steels obtained through different techniques of manufacturing, submitted to the same heat treatment procedure were evaluated by measuring their mechanical properties of transverse rupture strength and hardness. Sinter 23 obtained by hot isostatic pressing (HIP), VWM3C obtained by the conventional route and a M3:2 high speed steel obtained by cold compaction of water atomized powders and vacuum sintered with and without the addition of a small quantity of carbon were evaluated after the same heat treatment procedure. The vacuum sintered M3:2 high speed steel can be an alternative to the more expensive high speed steel produced by hot isostatic pressing and with similar properties presented by the conventional one. The characterization of the vacuum sintered M3:2 high speed steel was performed by measuring the densities of the green compacts and after the sintering cycle. The sintering produced an acceptable microstructure and densities near to the theoretical. The transverse rupture strength was evaluated by means of three point bending tests and the hardness by means of Rockwell C and Vickers tests. The technique of scanning electronic microscopy (SEM) was used to evaluate the microstructure and to establish a relation with the property of transverse rupture strength. The structure was determined by means of X-ray diffraction (XRD) patterns and the retained austenite was detected to all the conditions of heat treatment. The main contribution of this work is to establish a relation between the microstructure and the mechanical property of transverse rupture strength and to evaluate the AISI M3:2 vacuum sintered high speed steel as an alternative to the similar commercial high speed steels. (author)

  9. Hip flexor strain - aftercare

    Science.gov (United States)

    ... flexor - aftercare; Hip flexor injury - aftercare; Hip flexor tear - aftercare; Iliopsoas strain - aftercare; Strained iliopsoas muscle - aftercare; Torn iliopsoas muscle - aftercare; Psoas strain - aftercare

  10. Reactor Dosimetry Applications Using RAPTOR-M3G:. a New Parallel 3-D Radiation Transport Code

    Science.gov (United States)

    Longoni, Gianluca; Anderson, Stanwood L.

    2009-08-01

    The numerical solution of the Linearized Boltzmann Equation (LBE) via the Discrete Ordinates method (SN) requires extensive computational resources for large 3-D neutron and gamma transport applications due to the concurrent discretization of the angular, spatial, and energy domains. This paper will discuss the development RAPTOR-M3G (RApid Parallel Transport Of Radiation - Multiple 3D Geometries), a new 3-D parallel radiation transport code, and its application to the calculation of ex-vessel neutron dosimetry responses in the cavity of a commercial 2-loop Pressurized Water Reactor (PWR). RAPTOR-M3G is based domain decomposition algorithms, where the spatial and angular domains are allocated and processed on multi-processor computer architectures. As compared to traditional single-processor applications, this approach reduces the computational load as well as the memory requirement per processor, yielding an efficient solution methodology for large 3-D problems. Measured neutron dosimetry responses in the reactor cavity air gap will be compared to the RAPTOR-M3G predictions. This paper is organized as follows: Section 1 discusses the RAPTOR-M3G methodology; Section 2 describes the 2-loop PWR model and the numerical results obtained. Section 3 addresses the parallel performance of the code, and Section 4 concludes this paper with final remarks and future work.

  11. Potential recoverable natural gas resources in China

    Institute of Scientific and Technical Information of China (English)

    Liu Chenglin; Zhu Jie; Che Changbo; Liu Guangdi

    2008-01-01

    Natural gas resources in China are abundant. The undiscovered recoverable natural gas resources in China are estimated to be 19.27×1012 m3. Natural gas is mainly distributed in the middle and west China and offshore areas of China. The Tarim Basin, Sichuan Basin, Ordos Basin, East China Sea Basin, Tsaidam Basin, Yinggehai Basin, and Qiongdongnan Basin are the main gas-beating basins. The natural gas resources are not distributed evenly and are under-explored in China. The deeper horizons in east China, foreland basins and craton paleo-uplifts in the middle and west China, and the offshore basins are the main exploration areas in the future.

  12. Lead generation using pharmacophore mapping and three-dimensional database searching: application to muscarinic M(3) receptor antagonists.

    Science.gov (United States)

    Marriott, D P; Dougall, I G; Meghani, P; Liu, Y J; Flower, D R

    1999-08-26

    By using a pharmacophore model, a geometrical representation of the features necessary for molecules to show a particular biological activity, it is possible to search databases containing the 3D structures of molecules and identify novel compounds which may possess this activity. We describe our experiences of establishing a working 3D database system and its use in rational drug design. By using muscarinic M(3) receptor antagonists as an example, we show that it is possible to identify potent novel lead compounds using this approach. Pharmacophore generation based on the structures of known M(3) receptor antagonists, 3D database searching, and medium-throughput screening were used to identify candidate compounds. Three compounds were chosen to define the pharmacophore: a lung-selective M(3) antagonist patented by Pfizer and two Astra compounds which show affinity at the M(3) receptor. From these, a pharmacophore model was generated, using the program DISCO, and this was used subsequently to search a UNITY 3D database of proprietary compounds; 172 compounds were found to fit the pharmacophore. These compounds were then screened, and 1-[2-(2-(diethylamino)ethoxy)phenyl]-2-phenylethanone (pA(2) 6.67) was identified as the best hit, with N-[2-(piperidin-1-ylmethyl)cycohexyl]-2-propoxybenz amide (pA(2) 4. 83) and phenylcarbamic acid 2-(morpholin-4-ylmethyl)cyclohexyl ester (pA(2) 5.54) demonstrating lower activity. As well as its potency, 1-[2-(2-(diethylamino)ethoxy)phenyl]-2-phenylethanone is a simple structure with limited similarity to existing M(3) receptor antagonists.

  13. Development of Protection System Preventing 60 000 m3 Air Compressor from Stall%60000m3空压机喘振保护系统的研发

    Institute of Scientific and Technical Information of China (English)

    李学波

    2014-01-01

    This article describes the reason and harm of air compressor stall in detail ,and elaborates the principle of the anti-stall control system .A protection system for 60 000 m3 air compressor is set up .By using the function of DCS and PLC ,we can make the control of compressor fast and reliable .This work has important reference value to the other anti-stall control systems .%简述了喘振的原理及危害。详细阐述了防喘振系统的控制原理,并建立了60000 m3空压机的保护系统,利用DCS和PLC的强大功能实现快速可靠的控制,对其他系统的防喘振控制有着重要的参考价值。

  14. M3 version 3.0: Verification and validation; Hydrochemical model of ground water at repository site

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Javier B. (Dept. of Earth Sciences, Univ. of Zaragoza, Zaragoza (Spain)); Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Skaarman, Erik (Abscondo, Bromma (Sweden)); Gurban, Ioana (3D-Terra (Canada))

    2009-01-15

    Hydrochemical evaluation is a complex type of work that is carried out by specialists. The outcome of this work is generally presented as qualitative models and process descriptions of a site. To support and help to quantify the processes in an objective way, a multivariate mathematical tool entitled M3 (Multivariate Mixing and Mass balance calculations) has been constructed. The computer code can be used to trace the origin of the groundwater, and to calculate the mixing proportions and mass balances from groundwater data. The M3 code is a groundwater response model, which means that changes in the groundwater chemistry in terms of sources and sinks are traced in relation to an ideal mixing model. The complexity of the measured groundwater data determines the configuration of the ideal mixing model. Deviations from the ideal mixing model are interpreted as being due to reactions. Assumptions concerning important mineral phases altering the groundwater or uncertainties associated with thermodynamic constants do not affect the modelling because the calculations are solely based on the measured groundwater composition. M3 uses the opposite approach to that of many standard hydrochemical models. In M3, mixing is evaluated and calculated first. The constituents that cannot be described by mixing are described by reactions. The M3 model consists of three steps: the first is a standard principal component analysis, followed by mixing and finally mass balance calculations. The measured groundwater composition can be described in terms of mixing proportions (%), while the sinks and sources of an element associated with reactions are reported in mg/L. This report contains a set of verification and validation exercises with the intention of building confidence in the use of the M3 methodology. At the same time, clear answers are given to questions related to the accuracy and the precision of the results, including the inherent uncertainties and the errors that can be made

  15. M3 version 3.0: Verification and validation; Hydrochemical model of ground water at repository site

    Energy Technology Data Exchange (ETDEWEB)

    Gomez, Javier B. (Dept. of Earth Sciences, Univ. of Zaragoza, Zaragoza (Spain)); Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Skaarman, Erik (Abscondo, Bromma (Sweden)); Gurban, Ioana (3D-Terra (Canada))

    2009-01-15

    Hydrochemical evaluation is a complex type of work that is carried out by specialists. The outcome of this work is generally presented as qualitative models and process descriptions of a site. To support and help to quantify the processes in an objective way, a multivariate mathematical tool entitled M3 (Multivariate Mixing and Mass balance calculations) has been constructed. The computer code can be used to trace the origin of the groundwater, and to calculate the mixing proportions and mass balances from groundwater data. The M3 code is a groundwater response model, which means that changes in the groundwater chemistry in terms of sources and sinks are traced in relation to an ideal mixing model. The complexity of the measured groundwater data determines the configuration of the ideal mixing model. Deviations from the ideal mixing model are interpreted as being due to reactions. Assumptions concerning important mineral phases altering the groundwater or uncertainties associated with thermodynamic constants do not affect the modelling because the calculations are solely based on the measured groundwater composition. M3 uses the opposite approach to that of many standard hydrochemical models. In M3, mixing is evaluated and calculated first. The constituents that cannot be described by mixing are described by reactions. The M3 model consists of three steps: the first is a standard principal component analysis, followed by mixing and finally mass balance calculations. The measured groundwater composition can be described in terms of mixing proportions (%), while the sinks and sources of an element associated with reactions are reported in mg/L. This report contains a set of verification and validation exercises with the intention of building confidence in the use of the M3 methodology. At the same time, clear answers are given to questions related to the accuracy and the precision of the results, including the inherent uncertainties and the errors that can be made

  16. Restoration of Bottom Plate Leakage at 80,000 m3 Wiggins Gasholder%8万m3威金斯煤气柜柜底板泄漏修复

    Institute of Scientific and Technical Information of China (English)

    董永涛

    2015-01-01

    8万m3威金斯柜在生产运行中柜底板发生泄漏,采取临时措施封堵后效果不佳,为了避免事态扩大停柜检修,针对柜底板蜂窝状腐蚀,以托补钢板的形式予以加强,消除煤气泄漏的安全隐患.

  17. 基于ARM Cortex-M3的步进电机线性速度控制的实现%The Realization of Linear Speed Control of Stepper Motor Based on ARM Cortex-M3

    Institute of Scientific and Technical Information of China (English)

    罗鑫; 张峰

    2009-01-01

    Conex-M3是ARM公司最新推出的基于ARMy7体系架构的处理核.步进电机已被广泛的应用于速度、位置等控制领域.本文实现了基于Codex-M3内核处理器的步进电机的线性速度控制.针对步进电机控制过程中易出现的失步和过冲现象,提出了一种步进电机加减速控制算法.首先,在Codex-M3内核处理器上移植了μCOS-Ⅱ实时操作系统.在此基础上,利用系统的API接口函数用程序实现了加减速控制算法,并最终实现了对两路步进电机的控制.

  18. A pplication of A utomatic Injection T echnology in 3200m3 B last F urnace of L aiwu S teel%全自动喷吹技术在莱钢3200 m3高炉中的应用

    Institute of Scientific and Technical Information of China (English)

    段崇庆

    2013-01-01

    3 200 m3 blast furnace injection system of Laiwu Steel uses the technology of the UK Clyde. This article mainly introduces the automatic work flow, the algorithm of injection rate and the control algorithms of conveying gas flow and feeder speed. The technology has flexible control, high precision and stable performance. Without increasing the volume of the blast furnace, the yield increases by 10%-20%, the annual economic benefit is 46.1 million Yuan.%莱钢3200 m3高炉喷吹系统采用英国克莱德喷吹技术,并重点介绍其全自动工作流程、喷吹率的算法、输送气流量控制算法、给料机速度控制算法等。该技术控制灵活、精度高,性能稳定可靠,在不增加高炉容积的条件下增产10%~20%,年创经济效益达4610万元。

  19. Development of Purification Technology of Natural Gas in Sichuan

    Institute of Scientific and Technical Information of China (English)

    Chen Genliang

    1995-01-01

    @@ Sichuan is an important base of natural gas production in China. Its output is about 70×108 m3/a which makes up over 40% of that in whole country. The composition of natural gas from various fields in Sichuan is different. Most of the gas contains H2S which reaches its summit of above 490 g/m3. It also contains CO2. According to the criterion, H2S conent in natural gas should be lower than 20 mg/m3, about 70%of the gas produced in Sichuan has to be purified before it comes into use for commercial purpose. Therefore it is of great significance for our natural gas industry to develop the purification technology.

  20. Gas Field Development in Sichuan Basin: An Introduction to Typical Reservoirs

    Institute of Scientific and Technical Information of China (English)

    Ran Longhui; Luo Zili

    1996-01-01

    @@ So far 80 gas fields and 50 gas structures have been found in Sichuan Basin. More than 1300 commercial gas wells have been drilled cumulatively, and more than 600 gas wells are gas producers. The gas output is 20 × 106m3 per day, and the cumulative production reaches 140 ×109 m3, with a recovery percentage of about 50%. At present, most of the eight stable production gas fields are located in East Sichuan, with their reserves accounting for13.4% of the total and recovery percent being 35.7%.

  1. Gas and Gas Pains

    Science.gov (United States)

    ... problems with gas if you: Are lactose or gluten intolerant Eat a diet rich in fruits, vegetables, whole grains and legumes Drink carbonated beverages Have a chronic intestinal condition, such as irritable bowel syndrome or inflammatory bowel disease Neither age nor sex ...

  2. [Biological experiments in flights of unmanned space craft Foton-M2 and Foton-M3].

    Science.gov (United States)

    Ilyin, E A

    2013-01-01

    Missions of unmanned spacecraft Foton-M2 (2005) and Foton-M3 (2007) of 16 and 12 days in duration, respectively, provided an opportunity to conduct the Russian/US experiments with snails (Helix lucorum and Helix aspera), newts (Pleurodeles waltli), geckos (Pachydactilus turneri) and microorganisms (Streptomyces lividans 66, E. coli and others). Besides, Foton-M3 carried a Russian experiment with Mongolian gerbils (Meriones unguiculatus). Objectives of the space experiments were to study the micro-g effects on the living systems' behavior, structure and functioning, post-traumatic regeneration of bone and organs, stable inheritance of plasmid pIJ 702, and melanin pigment synthesis by streptomycets. The survey paper presents the major findings of a large team of investigators.

  3. Srv mediated dispersal of streptococcal biofilms through SpeB is observed in CovRS+ strains.

    Directory of Open Access Journals (Sweden)

    Kristie L Connolly

    Full Text Available Group A Streptococcus (GAS is a human specific pathogen capable of causing both mild infections and severe invasive disease. We and others have shown that GAS is able to form biofilms during infection. That is to say, they form a three-dimensional, surface attached structure consisting of bacteria and a multi-component extracellular matrix. The mechanisms involved in regulation and dispersal of these GAS structures are still unclear. Recently we have reported that in the absence of the transcriptional regulator Srv in the MGAS5005 background, the cysteine protease SpeB is constitutively produced, leading to increased tissue damage and decreased biofilm formation during a subcutaneous infection in a mouse model. This was interesting because MGAS5005 has a naturally occurring mutation that inactivates the sensor kinase domain of the two component regulatory system CovRS. Others have previously shown that strains lacking covS are associated with decreased SpeB production due to CovR repression of speB expression. Thus, our results suggest the inactivation of srv can bypass CovR repression and lead to constitutive SpeB production. We hypothesized that Srv control of SpeB production may be a mechanism to regulate biofilm dispersal and provide a mechanism by which mild infection can transition to severe disease through biofilm dispersal. The question remained however, is this mechanism conserved among GAS strains or restricted to the unique genetic makeup of MGAS5005. Here we show that Srv mediated control of SpeB and biofilm dispersal is conserved in the invasive clinical isolates RGAS053 (serotype M1 and MGAS315 (serotype M3, both of which have covS intact. This work provides additional evidence that Srv regulated control of SpeB may mediate biofilm formation and dispersal in diverse strain backgrounds.

  4. Electrochemical properties of mixed conducting (La,M)(CoFe) oxide perovskites (M=3DSr, Ca, and Ba)

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J.W.; Armstrong, T.R.; Bates, J.L. [and others

    1996-04-01

    Electrical properties and oxygen permeation properties of solid mixed-conducting electrolytes (La,M)(CoFe) oxide perovskites (M=3DSr, Ca, and Ba) have been characterized. These materials are potentially useful as passive membranes to separate high purity oxygen from air and as the cathode in a fuel cell. Dilatometric linear expansion measurements were performed as a function of temperature and oxygen partial pressure to evaluate the stability.

  5. The Armys M-1 Abrams, M-2/M-3 Bradley, and M-1126 Stryker: Background and Issues for Congress

    Science.gov (United States)

    2016-04-05

    entered service with the Army in 1980; the M-2/M-3 Bradley Fighting Vehicle in 1981; and the Stryker Combat Vehicle in 2001. Under current Army... Under current Army modernization plans, the Army envisions all three vehicles in service with Active and National Guard forces beyond FY2028...Information from this section, unless otherwise noted, is taken from Jane’s Armour and Artillery, 2011-2012, pp.177- 185, and the author’s personal

  6. Inhalation by design: dual pharmacology β-2 agonists/M3 antagonists for the treatment of COPD.

    Science.gov (United States)

    Jones, Lyn H; Baldock, Helen; Bunnage, Mark E; Burrows, Jane; Clarke, Nick; Coghlan, Michele; Entwistle, David; Fairman, David; Feeder, Neil; Fulton, Craig; Hilton, Laura; James, Kim; Jones, Rhys M; Kenyon, Amy S; Marshall, Stuart; Newman, Sandra D; Osborne, Rachel; Patel, Sheena; Selby, Matthew D; Stuart, Emilio F; Trevethick, Michael A; Wright, Karen N; Price, David A

    2011-05-01

    This paper describes the successful design and development of dual pharmacology β-2 agonists-M3 antagonists, for the treatment of chronic obstructive pulmonary disorder using the principles of 'inhalation by design'. A key feature of this work is the combination of balanced potency and pharmacodynamic duration with desirable pharmacokinetic and material properties, whilst keeping synthetic complexity to a minimum. Copyright © 2010 Elsevier Ltd. All rights reserved.

  7. Implications for Damage Recognition during Dpo4-Mediated Mutagenic Bypass of m1G and m3C Lesions

    Energy Technology Data Exchange (ETDEWEB)

    Rechkoblit, Olga; Delaney, James C.; Essigmann, John M.; Patel, Dinshaw J. (MIT); (MSKCC)

    2012-05-08

    DNA is susceptible to alkylation damage by a number of environmental agents that modify the Watson-Crick edge of the bases. Such lesions, if not repaired, may be bypassed by Y-family DNA polymerases. The bypass polymerase Dpo4 is strongly inhibited by 1-methylguanine (m1G) and 3-methylcytosine (m3C), with nucleotide incorporation opposite these lesions being predominantly mutagenic. Further, extension after insertion of both correct and incorrect bases, introduces additional base substitution and deletion errors. Crystal structures of the Dpo4 ternary extension complexes with correct and mismatched 3'-terminal primer bases opposite the lesions reveal that both m1G and m3C remain positioned within the DNA template/primer helix. However, both correct and incorrect pairing partners exhibit pronounced primer terminal nucleotide distortion, being primarily evicted from the DNA helix when opposite m1G or misaligned when pairing with m3C. Our studies provide insights into mechanisms related to hindered and mutagenic bypass of methylated lesions and models associated with damage recognition by repair demethylases.

  8. Drop by drop backscattered signal of a 50 × 50 × 50 m3 volume: A numerical experiment

    Science.gov (United States)

    Gires, A.; Tchiguirinskaia, I.; Schertzer, D.

    2016-09-01

    The goal of this paper is to analyse the influence of individual drop positions on a backscattered radar signal. This is achieved through a numerical experiment: a 3D rain drop field generator is developed and implemented over a volume of 50 × 50 × 50 m3, and then the sum of the electromagnetic waves backscattered by its hydrometeors is computed. Finally the temporal evolution over 1 s is modelled with simplistic assumptions. For the rainfall generator, the liquid water content (LWC) distribution is represented with the help of a multiplicative cascade down to 0.5 m, below which it is considered as homogeneous. Within each 0.5 × 0.5 × 0.5 m3 patch, liquid water is distributed into drops, located randomly uniformly according to a pre-defined drop size distribution (DSD). Such configuration is compared with the one consisting of the same drops being uniformly distributed over the entire 50 × 50 × 50 m3 volume. Due to the fact that the radar wave length is much smaller than the size of a rainfall "patch", it appears that, in agreement with the theory, we retrieve an exponential distribution for potential measures on horizontal reflectivity. Much thinner dispersion is noticed for differential reflectivity. We show that a simple ballistic assumption for drop velocities does not enable the reproduction of radar observations, and turbulence should be taken into account. Finally the sensitivity of these outputs to the various model parameters is quantified.

  9. The surface accessibility of the glycine receptor M2-M3 loop is increased in the channel open state.

    Science.gov (United States)

    Lynch, J W; Han, N L; Haddrill, J; Pierce, K D; Schofield, P R

    2001-04-15

    Mutations in the extracellular M2-M3 loop of the glycine receptor (GlyR) alpha1 subunit have been shown previously to affect channel gating. In this study, the substituted cysteine accessibility method was used to investigate whether a structural rearrangement of the M2-M3 loop accompanies GlyR activation. All residues from R271C to V277C were covalently modified by both positively charged methanethiosulfonate ethyltrimethylammonium (MTSET) and negatively charged methanethiosulfonate ethylsulfonate (MTSES), implying that these residues form an irregular surface loop. The MTSET modification rate of all residues from R271C to K276C was faster in the glycine-bound state than in the unliganded state. MTSES modification of A272C, L274C, and V277C was also faster in the glycine-bound state. These results demonstrate that the surface accessibility of the M2-M3 loop is increased as the channel transitions from the closed to the open state, implying that either the loop itself or an overlying domain moves during channel activation.

  10. Analysis of the Propulsion System for River-to-sea LNG Carriers%6000 m3江海直达 LNG 运输船推进系统分析

    Institute of Scientific and Technical Information of China (English)

    孙祥仲; 秦辉

    2015-01-01

    Taking the newly-developed 6 000 m3 LNG carrier as an example, the selections of the main engine and propul-sion system, the fuel gas supply system of the carrier are investigated according to practical situations, which can provide refer-ence for propulsion system design of the small scale of river-to-sea LNG carrier.%针对开发船型6000 m3江海直达LNG运输船实际情况,介绍主机选型、推进方式选择、燃气供应,为小型江海直达LNG运输船推进系统设计提供参考。

  11. 藏灵菇酵母菌M3耐胃肠道逆环境特性及降胆固醇的实验研究%Study, on Tolerance Characteristics of the Gastrointestinal Tract and Cholesterol-Lowering Effects of Kluyveromyces marxianus M3 from Tibetan Kefir

    Institute of Scientific and Technical Information of China (English)

    刘慧; 陈湘宁; 李晨; 杨磊; 张红星

    2009-01-01

    利用从藏灵菇中筛选的马克斯克鲁维酵母M3菌株探讨胃肠道耐受性及体外降胆固醇功效.分别在pH 1.5~4.5、胆盐浓度0.3%~3.0%、NaCl浓度3.0%~6.0%的模拟胃肠道环境下,采用活菌计数法检测M3菌株的耐胃肠道逆环境特性,以邻苯二甲醛法检测其降胆固醇效果.结果表明:在pH 1.5~4.5作用4 h活菌数可达106cfu/ml,0.3%~3.0%胆盐及3.0%~6.0%NaCl作用8 h活菌数可达105~106cfu/ml,在pH1.5~3.0(4h)及胆盐浓度0.3%~3.0%的模拟人体胃肠道环境下降胆固醇率均在60%以上.显示M3菌株具有较强的耐胃肠道逆环境特性及良好的降胆固醇能力,为开发研制降胆固醇功能食品及微生态制剂提供了试验基础.%Using Kluyveromyces marxianus M3 isolated from Tibetan Kefir to study tolerance characteristics of the gastrointestinal tract and cholesterol-lowering effects in vitro. Viable count was used to detect M3 stains' tolerance characteristics of the gastrointestinal tract separately under simulated gastrointestinal tract environment pH 1.5-4.5, salt concentration 0.3%-3.0%, sodium chloride 3.0%-6.0%. At the same time, using O-phthalaldehyde to detect the effect of its cholesterol-lowering. The result shows that after 4 hours under pH 1.5-4.5 the viable can get 106 cfu/ml. The viable can be 105-106 cfu/ml under 0.3%-3.0% bovine bile salt and 3.0%-6.0% sodium chloride (8 h). Also, in the simulated gastrointestinal tract environment pH1.5-3.0 (4h), salt concentration 0.3%-3.0% (8 h) the cholesterol-lowering can reach 60%. M3 strains have strong tolerance characteristics against the environment of the gastrointestinal tract and the good cholesterol-lowering ability, which provide the experimental basis for the development of cholesterol-lowering functional foods and probiotics' study.

  12. Structural and electronic properties of reduced transition metal oxide clusters, M3O8 and M3O8- (M = Cr, W), from photoelectron spectroscopy and quantum chemical calculations.

    Science.gov (United States)

    Li, Shenggang; Zhai, Hua-Jin; Wang, Lai-Sheng; Dixon, David A

    2009-10-22

    We report a comparative study of reduced transition metal oxide clusters, M(3)O(8)(-) (M = Cr, W) anions and their neutrals, via anion photoelectron spectroscopy (PES) and density functional theory (DFT) and molecular orbital theory (CCSD(T)) calculations. Well-resolved PES spectra are obtained for M(3)O(8)(-) (M = Cr, W) at 193 and 157 nm photon energies. Different PES spectra are observed for M = Cr versus M = W. Extensive DFT and CCSD(T) calculations are performed to locate the ground and low-lying excited states for the neutrals and anions. The ground states of Cr(3)O(8) and Cr(3)O(8)(-) are predicted to be the (3)B(2) and (4)B(2) states of a C(2v) structure, respectively, revealing ferromagnetic spin coupling for Cr 3d electrons. In contrast, the ground states of W(3)O(8) and W(3)O(8)(-) are predicted to be the (1)A' state (C(s) symmetry) and the (2)A(1) state (C(2v) symmetry), respectively, showing metal-metal d-d bonding in the anion. The current cluster geometries are in qualitative agreement with prior DFT studies at the PBE level for M = Cr and the B3LYP level for M = W. The BP86 and PW91 functionals significantly outperform the B3LYP functional for the Cr species, in terms of relative energies, electron detachment energies, and electronic excitation energies, whereas the B3LYP functional is better for the W species. Accurate heats of formation for the ground states of M(3)O(8) are calculated from the clustering energies and the heats of formation of MO(2) and MO(3). The energetics have been used to predict redox reaction thermochemistry.

  13. Design of Instrument Lathe Control System Based on CORTEX-M3 Technology%基于CORTEX-M3技术的仪表车床控制系统设计

    Institute of Scientific and Technical Information of China (English)

    李香泉; 刘浪; 洪耀球

    2012-01-01

    采用了基于CORTEX-M3核的STM32F103VCT6 ARM芯片作为核心,实现4轴步进电机控制功能,同时系统还实现了与基于MODBUS RTU协议的文本显示或工业触摸屏的通信功能,以及获取相关输入信号和控制继电器功能.

  14. Gas Sensor

    KAUST Repository

    Luebke, Ryan

    2015-01-22

    A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

  15. Geobacteraceae strains and methods

    Science.gov (United States)

    Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana

    2015-07-07

    Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.

  16. lOT Data Acquisition Substation for forestry ecology monitor Based on Cortex- M3%Cortex—M3的生态物联网数据采集分站设计

    Institute of Scientific and Technical Information of China (English)

    李骏慧; 陶华; 俞哲伟; 宋军

    2011-01-01

    The IOT(Internet of things)data acquisition substation for forestry ecology monitor is proposed, which employs the Cortex- M3 processor as the CPU. Digital temperature humidity sensor, smoke sensor, C()2 sensor and digital luminance sensor are employed to acquire the environment information which is related with forestry ecology. Then the sensors data are collected by LM3S811 and ID of substation is added to data packet. Further more, LM3SSll transmits the data packet to servers using RF module.%以Cortex—M3处理器LM3S811为核心,设计了面向森林生态监测的物联网数据采集终端分站系统。通过单总线数字式温湿度传感器、烟雾传感器、CO2传感器和环境光亮度传感器分别采集温度、湿度、可燃性颗粒物、CO2含量和光照等与林木生态相关的环境信息和林场防火的相关信息。由LM3S81l处理器处理并添加分站ID和校验码后,采用无线模块传送给服务器。

  17. 100 m3/min往复式空压机长周期安全稳定运行研究%Study on Long, Safe and Stable Operation of 100 m3/min Reciprocating Air Compressor

    Institute of Scientific and Technical Information of China (English)

    陈山

    2015-01-01

    介绍了安徽晋煤中能化工股份有限公司100 m3/min往复式空压机的工况,针对影响机组长周期稳定、安全运行的问题,采取了优化设备结构和工艺结构的措施,优化结果表明:年创造经济效益16.28万元,实现了节能降耗的目的。%This paper introduces the working conditions of 100 m3/min reciprocating air compressor of Anhui Jinmei Zhongneng Chemical Co. , Ltd. To solve the problem affecting long, safe and stable operation of the unit, the author optimizes the structures of the equipment and the process. The opti-mization results show that it has gained 162 800 RMB yuan/a economic benefit and achieved its energy-saving and consumption-reducing purpose.

  18. 石家庄陕鼓2×40000m^3/h空分设备设计优化%Optimized design of Shijiazhuang Shaanxi Blower Group 2 ×40000m^3/h air separation plant

    Institute of Scientific and Technical Information of China (English)

    张岑; 卢子学

    2012-01-01

    At design stage of Shijiazhuang Shaanxi Blower Group 2 ×40000m^3/h air separation plants, it found unreasonable design in the nitrogen compression and supply system, air compressor vent silencer, and connection mode for feeding boosted air to plate-fin type heat exchanger, as well as the factors impairing stable and safe operation of the product continuous supply and air separation plant. Here, the optimization measures taken for the unreasonable factors are described, which puts a sound basis for stable run of the air separation plant.%在石家庄陕鼓2×40000m^3/h空分设备设计阶段,发现氮气压缩和供应系统、空压机放空消声器以及增压空气进板翅式换热器的连接方式设计不舍理,存在影响产品连续供应和空分设备稳定、安全运行的因素。介绍对这些不合理因素所采取的优化措施,为空分设备建成后稳定运行奠定基础。

  19. 3500m3/h绞吸挖泥船甲板机舱振动分析与优化%Analysis and Optimization of Deck Cabin Vibration in 3 500 m3/h Cutter Suction Dredger

    Institute of Scientific and Technical Information of China (English)

    王炜

    2015-01-01

    针对3500 m3/h绞吸式挖泥船的甲板机舱异常振动问题,建立机舱结构有限元模型,进行振动模态分析,发现甲板下支柱与柴油机工作频率耦合引起的共振是导致甲板机舱异常振动的主要原因,进行甲板机舱结构和立柱位置的优化,检测表明,优化后的结构有效避开了共振频率,振动速度峰值和加速度大幅下降,优化效果良好。%In view of abnormal vibration on deck engine room of 3 500 m3/h cutter suction dredger, the FE structural model of the engine room is established.Via the analysis of mode of vibration, resonance coupling of working frequency of the diesel en-gine with the pillar under deck is the primary cause for abnormal vibration of deck engine room.So the location of pillars is rede-signed to avoid the resonant frequency.The test results verify that the peaks of vibration acceleration and velocity are sharply de-creased;the effects of optimization are satisfactory.

  20. Logic control of molecular sieve purification system of 65000m3· h-1 air separation plant%65000m3·h-1空分设备分子筛纯化系统逻辑控制

    Institute of Scientific and Technical Information of China (English)

    朱玉芹

    2012-01-01

    The structure and technical process of molecular sieve purification system of 65000m3/ an air separation plant of Hebi coal and electeicity 600 ktpa methanol project are briefed, automatic valve closing / opening logical control of molecular sieve purification system, automatic / manual operation sequence control program,implementation of the sequence control program and optimized reform of the sequence control configuration program of the molecular sieve absorber in accordance with site operation conditions are described.%简介鹤壁煤电股份有限公司化工分公司空分厂65000m3·h-1空分设备分子筛纯化系统结构和工艺流程,介绍分子筛纯化系统阀门自动开关控制逻辑、顺控程序自动/手动运行、顺控程序执行过程,以及根据现场生产运行实际情况,对分子筛吸附器顺控组态程序进行的优化改进.

  1. Design of Low-cost LCD Touch Screen Based on Cortex-M3%基于Cortex-M3的低成本液晶触摸屏设计

    Institute of Scientific and Technical Information of China (English)

    张勇; 邹卫军

    2014-01-01

    选用NXP公司内置LCD控制器的Cortex-M3处理器LPC1788作为主控,设计了一种低成本的液晶触摸屏。介绍了四线电阻式触摸屏与LPC1788的接口设计,移植emWin图形界面库为GUI提供支持。实际运用证明,低成本液晶触摸屏运行稳定,界面设计便捷。%This paper provides a Iow-cost LCD Touch Screen design which use LPC1788 as the processor.LPC1788 which is de-signed by NXP,is a SoC based on Cortex-M3 CPU and contains a buiId-in LCD controI er,and introduces the interface of 4-wire resistive touch pad with LPC1788.In addition,transpIant the graphicaI interface Iibrary emWin to provide best support for the design of GUI.The practicaI appIication shows this screen works stabIy and makes the interface design convenient.

  2. 基于ARM Cortex M3内核TFT触摸屏无线遥控设计%On Wireless Remote Control System Design Based on the ARM Cortex M3 core TFT Touch Screen

    Institute of Scientific and Technical Information of China (English)

    李金赐; 梁九兴

    2012-01-01

    The designing is based on Bluetooth communication through the ARM Contex M3 core microprocessor STM32F103VET6 and TEF color LCD touch screen to design a touch-screen remote control.This kind of remote control,through touching the controls displayed on the TFT color LCD of the host computer,triggers variety of control signals and then wireless Bluetooth module sends control signals.%本设计是建立在蓝牙通信下通过ARM Cortex M3内核的微处理器STM32F103VET6与TFT彩色液晶触摸屏来设计一种触摸屏遥控器。该遥控器通过触摸上位机TFT彩色液晶触摸屏上显示的各个控件来触发各种控制信号;无线蓝牙模块发送各种控制信号。

  3. Design and Realization of GUI Based on ARM Cortex-M3%基于ARM Cortex-M3的图形用户界面设计和实现

    Institute of Scientific and Technical Information of China (English)

    韩定

    2015-01-01

    采用基于Cortex-M3内核的LPC1788为主控芯片和320(RGB)*480 pixels的带触摸点阵液晶屏,应用emWin图形库设计了一款简单易用的小型人机交互界面,并提供大容量的图片存储空间和可扩展字库存储空间,便于用户使用,可以广泛应用于家庭自动化和工业控制领域。%The ARM Cortex-M3 kernel processor LPC1788 and 320*480 pixels LCD with touch is used to design a small Graphical User Interface. EmWin is a kind of open source software, which is used to GUI embedded system. It can be widely used in home automation and industrial control.

  4. 年产5000m3意杨LVL主材及设备量的计算与配置%Calculation and Configuration of Main Material and Equipment Quantity for Annual 5000m3 Populus LVL

    Institute of Scientific and Technical Information of China (English)

    蒋瞻

    2012-01-01

      LVL has become the fastest kind of wooden composite material product in the current woodworking industry. The configuration of materials and equipment of an enterprise located in Northern Jiangsu that manufactures 5000 m 3 Populus LVL annually is introduced, with emphasis placed on relevant design calculation and configuration of such main materials as veneer and adhesive and such main equipment as presses, with the aim to provide reference for China’s small and medium-sized plywood manufacturing enterprises in term of design of the materials and equipment for manufacturing Populus LVL products.%  LVL已成为当今木材加工行业发展速度最快的一种木质复合材料产品。介绍了苏北一家年产5000m3意杨LVL企业的加工材料与设备配置情况,着重对单板、胶黏剂主材及压机等主要设备进行了相关的设计计算与配置,为我国制造胶合板的中小型企业做好意杨LVL产品的主材及其设备的设计工作提供参考。

  5. DISCUSSION ABOUT HEAT BALANCE CALCULATION AND ENERGY SAVING FOR 2500 m3 BLAST FURNACE%承钢2500 m3高炉热平衡测算与节能探讨

    Institute of Scientific and Technical Information of China (English)

    王秀英

    2014-01-01

    以承钢3座2 500 m3高炉为研究对象,用第一总热平衡测试法进行了高炉热平衡测算.结果表明:承钢2 500 m3高炉近年来节能主要是降低了冷却软熔带带走热量约0.29 GJ/tFe,减少煤气带走热量约0.12 GJ/tFe,降低瓦斯灰带走热量约0.04 GJ/tFe.从测算结果可以看出,因高炉工艺优化吨铁耗风量降低后,收入项中热风带入的热量减少约0.4 GJ/tFe,碳素氧化带入的热量减少约0.12 GJ/tFe.介绍了承钢高炉近年采用的节能技术及应用效果,根据热平衡测算结果和目前的前沿节能技术,提出了承钢高炉进一步降低能耗的措施.

  6. Scale-up of industrial biodiesel production to 40 m(3) using a liquid lipase formulation.

    Science.gov (United States)

    Price, Jason; Nordblad, Mathias; Martel, Hannah H; Chrabas, Brent; Wang, Huali; Nielsen, Per Munk; Woodley, John M

    2016-08-01

    In this work, we demonstrate the scale-up from an 80 L fed-batch scale to 40 m(3) along with the design of a 4 m(3) continuous process for enzymatic biodiesel production catalyzed by NS-40116 (a liquid formulation of a modified Thermomyces lanuginosus lipase). Based on the analysis of actual pilot plant data for the transesterification of used cooking oil and brown grease, we propose a method applying first order integral analysis to fed-batch data based on either the bound glycerol or free fatty acid content in the oil. This method greatly simplifies the modeling process and gives an indication of the effect of mixing at the various scales (80 L to 40 m(3) ) along with the prediction of the residence time needed to reach a desired conversion in a CSTR. Suitable process metrics reflecting commercial performance such as the reaction time, enzyme efficiency, and reactor productivity were evaluated for both the fed-batch and CSTR cases. Given similar operating conditions, the CSTR operation on average, has a reaction time which is 1.3 times greater than the fed-batch operation. We also showed how the process metrics can be used to quickly estimate the selling price of the enzyme. Assuming a biodiesel selling price of 0.6 USD/kg and a one-time use of the enzyme (0.1% (w/woil ) enzyme dosage); the enzyme can then be sold for 30 USD/kg which ensures that that the enzyme cost is not more than 5% of the biodiesel revenue. Biotechnol. Bioeng. 2016;113: 1719-1728. © 2016 Wiley Periodicals, Inc.

  7. Adsorption of aromatics on the (111) surface of PtM and PtM3 (M = Fe, Ni) alloys

    Energy Technology Data Exchange (ETDEWEB)

    Hensley, Alyssa; Schneider, Sebastian; Wang, Yong; McEwen, Jean-Sabin

    2015-09-18

    The adsorption of benzene and phenol was studied on PtM and PtM3 (111) surfaces, with M being either Ni or Fe. Under vacuum, the most favorable near surface structures showed an enrichment in Pt over the M species. An analysis of the electronic structure of the metal species in the clean surfaces with different near surface structures was done with the d-band model and showed that the Pt's d-states are significantly shifted away from the Fermi level due to the Pt-M interactions while the M species' d-states were less affected, with Ni's d-band shifting closer to the Fermi level and Fe's d-band shifting away from the Fermi level. The adsorption of aromatics, benzene and phenol, on several near surface structures for the PtM and PtM3 (111) surfaces showed that higher surface M concentrations resulted in a stronger adsorption due to the larger amount of charge transferred between the adsorbate and surface. However, compared to the adsorption of benzene and phenol on monometallic surfaces, the adsorption of these species on the PtM and PtM3 (111) surfaces was significantly weakened. Overall, our results show that the observed behavior of these Pt/Fe and Pt/Ni alloys is similar to that seen for the previously studied Pd/Fe surfaces. Furthermore, balancing the weakly adsorbing Pt surface species with the more strongly interacting Fe or Ni species can lead to the tailored adsorption of aromatics with applications in both hydrodeoxygenation and hydrogenation reactions by increasing the desorption rate of wanted aromatic products.

  8. Syntheses, crystal structure and magnetic properties of Rm+nCo5m+3nB2n

    Institute of Scientific and Technical Information of China (English)

    梁敬魁; 陈怡; 陈小龙

    2001-01-01

    The phase relations at the 600℃ and 700℃ isothermal sections of the ternary systems R-Co-B for R= Nd, Pr and R = Sm, Gd respectively were summarized in this paper. For Rm+ n Co5m+3n B2n, two new types ofcompounds R3Co13B2(R=Pr, Nd, Sm, Gd, Dy, Ho, Er, Y) (m=2, n=1) andR5Co19B6(R=Pr, Nd) (m=2,n = 3 ) were synthesized by utilizing the principle of structural combination. Their crystalstructures and easymagnetization direction were determined by X-ray powder diffraction, and structures were refined by the Rietveldmethod. The Curie temperature Tc, saturation magnetization M8 and anisotropic field HA of the new compounds weremeasured using a vibrating-sample magnetometer, an extraction sample magnetometer and M(H) - H curves of samplesin different magnetization directions respectively. The Tc and Ms of Rm + n Co5 m + 3 n B2n increase with increasing values of mat a given n value. HA increases with an increase in n when m is kept invariable. The effects of the substitution of Ni for Co on the magnetic properties of Nd13 Co15- x Nix B2 were also investigated. It was found that TsR decreased monotonously as the concentration of Ni increased, and at x = 3 the easy magnetization direction becomes axial at room temperature. The relations between crystal structure and magnetic properties of Rm + nCo5m+ 3nB2n and the possible routes of synthesizing permanent magnetic materials are also discussed.

  9. Differential effects of two strains of Rhizophagus intraradices on dry biomass and essential oil yield and composition in Calamintha nepeta

    Directory of Open Access Journals (Sweden)

    Roxana P Colombo

    Full Text Available The aim of this work was to determine the effects of two geographically different strains of Rhizophagus intraradices (M3 and GA5 on the total biomass and essential oil (EO yield and composition of Calamintha nepeta, with or without phosphorus (P fertilization, under greenhouse conditions.The plant biomass was not significantly affected by any of the treatments, showing higher values in control plants. Strains had a differential response in their root colonization rates: M3 reduced these parameters while GA5 did not modify them. Both strains affected EO yield in absence of P fertilization: M3 promoted EO yield in C. nepeta plants and GA5 resulted in negative effects. The percentage composition of EO was not significantly modified by either strain or P fertilization. M3 strain could be a potential fungal bioinoculant for production and commercialization of C. nepeta in the aromatic plant market.

  10. Potential application of an Aspergillus strain in a pilot biofilter for benzene biodegradation

    Science.gov (United States)

    Sun, Da; Zhang, Kun; Duan, Chuanren; Wu, Wei; Deng, Daiyong; Yu, Donghong; Shahzad, M. Babar; Xu, Dake; Tang, Ju; Luo, Li; Chen, Jia; Wang, Jinxuan; Chen, Yidan; Xie, Xiang; Wang, Guixue

    2017-04-01

    A biofilter with fungus was developed for efficient degradation of benzene, which can overcome the potential risk of leakage commonly found in such services. Results indicated that the optimum parameter values were temperature 40 °C, pH 6, and 500 mg L-1 of the initial benzene concentration. Besides, the empty bed residence time and inlet load range of biofilter were set to 20 s and 21.23-169.84 g m-3 h-1 respectively. Under these conditions, this biofilter can obtain the maximum removal efficiency of more than 90%, the eliminating capacity could be up to 151.67 g m-3 h-1. Furthermore, scanning electron microscopy was used to investigate three filler materials for packing fungus biofilm. This is the first study introducing an Aspergillus strain for benzene removal and these results highlight that the development of this biofilter has the potential scaling-up application as gas-processing of industrial wastes.

  11. Successful management of pulmonary hemorrhage and aspergillosis in a patient with acute myeloid leukemia (AML-M3

    Directory of Open Access Journals (Sweden)

    Hulya Gunbatar

    2015-01-01

    Full Text Available A 35-year-old man presented with a one month history of gingival bleeding. He was diagnosed with Acute Myeloid Leukemia (AML-M3. During treatment he developed alveolar hemorrhage for which he was treated with a steroid. After the steroid treatment he developed a nodule, a cavitary lesion and atelectasia in the left lung. He was treated with voriconazole. After therapy with voriconazole his lesion significantly decreased. This case illustrates the efficacy and safety of antifungal therapy with voriconazole for aspergillosis complicated by AML.

  12. Successful management of pulmonary hemorrhage and aspergillosis in a patient with acute myeloid leukemia (AML-M3).

    Science.gov (United States)

    Gunbatar, Hulya; Demir, Cengiz; Kara, Erdal; Esen, Ramazan; Sertogullarindan, Bunyamin; Asker, Selvi

    2015-01-01

    A 35-year-old man presented with a one month history of gingival bleeding. He was diagnosed with Acute Myeloid Leukemia (AML-M3). During treatment he developed alveolar hemorrhage for which he was treated with a steroid. After the steroid treatment he developed a nodule, a cavitary lesion and atelectasia in the left lung. He was treated with voriconazole. After therapy with voriconazole his lesion significantly decreased. This case illustrates the efficacy and safety of antifungal therapy with voriconazole for aspergillosis complicated by AML.

  13. LIQUIFIED NATURAL GAS (LNG CARRIERS

    Directory of Open Access Journals (Sweden)

    Daniel Posavec

    2010-12-01

    Full Text Available Modern liquefied natural gas carriers are double-bottom ships classified according to the type of LNG tank. The tanks are specially designed to store natural gas cooled to -161°C, the boiling point of methane. Since LNG is highly flammable, special care must be taken when designing and operating the ship. The development of LNG carriers has begun in the middle of the twentieth century. LNG carrier storage space has gradually grown to the current maximum of 260000 m3. There are more than 300 LNG carriers currently in operation (the paper is published in Croatian.

  14. Sprains and Strains

    Science.gov (United States)

    ... wrestling put people at risk for strains. Gymnastics, tennis, rowing, golf, and other sports that require extensive gripping can increase the risk of hand and forearm strains. Elbow strains sometimes occur in people who participate in ...

  15. Muscle strain treatment

    Science.gov (United States)

    Treatment - muscle strain ... Question: How do you treat a muscle strain ? Answer: Rest the strained muscle and apply ice for the first few days after the injury. Anti-inflammatory medicines or acetaminophen ( ...

  16. Muscle strain (image)

    Science.gov (United States)

    A muscle strain is the stretching or tearing of muscle fibers. A muscle strain can be caused by sports, exercise, a ... something that is too heavy. Symptoms of a muscle strain include pain, tightness, swelling, tenderness, and the ...

  17. The Horizontal Branch in the UV Colour Magnitude Diagrams. II. The case of M3, M13 and M79

    CERN Document Server

    Dalessandro, Emanuele; Ferraro, Francesco R; Mucciarelli, Alessio; Cassisi, Santi

    2012-01-01

    We present a detailed comparison between far-UV/optical colour Magnitude Diagrams obtained with high-resolution Hubble Space Telescope data and suitable theoretical models for three Galactic Globular Clusters: M3, M13 and M79. These systems represents a classical example of clusters in the intermediate metallicity regime that, even sharing similar metal content and age, show remarkably different Horizontal Branch morphologies. As a consequence, the observed differences in the colour distributions of Horizontal Branch stars cannot be interpreted in terms of either first (metallicity) or a second parameter such as age. We investigate here the possible role of variations of initial Helium abundance (Y). Thanks to the use of a proper setup of far-UV filters, we are able to put strong constraints on the maximum Y (Y_{max}) values compatible with the data. We find differences Delta Y_{max} ~ 0.02-0.04 between the clusters with M13 showing the largest value (Y_{max} ~ 0.30) and M3 the smallest (Y_{max} ~ 0.27). In g...

  18. 高铝渣对济钢3200m3高炉冶炼的影响%Influence of High Al2O3 Slag on Operation of 3 200 m3 BF in Jinan Steel

    Institute of Scientific and Technical Information of China (English)

    王军

    2015-01-01

    To the characteristics of high Al2O3 slag with higher viscosity, poor liquidity, and poor desulphurization ability, by adjusting the thermal system and distributing system, the Mg/Al ratio in the slag is controlled lager than 0.6 by increasing the MgO content in sintering, the MgO content in the slag is made between 8%-11%, the overall operation of 3 200 m3 BF in Jinan Steel can fit smelting requirement with high Al2O3 slag. Under the condition of slag ratio increase by 43 kg/t, the silicon in the pig iron was decreased, the desulphurization ability of the slag was strengthened and third grade iron was eliminated basically.%针对高铝渣特有的黏度高、流动性差、脱硫能力差的特点,济钢3 200 m3高炉通过调整热制度和布料制度,在烧结时提高MgO含量,控制渣中镁铝比>0.6,使渣中MgO含量在8%~11%,高炉的整体操作炉型适应了高铝渣的冶炼要求.在渣铁比升高43 kg/t的条件下,高炉生铁含硅降低,炉渣脱硫能力增强,基本杜绝了三类铁.

  19. New Technology Adopted and Operation Practice in No.3 3 200 m3 BF in Laiwu Steel%莱钢3#3200 m3高炉采用的新技术及生产实践

    Institute of Scientific and Technical Information of China (English)

    贾利军; 孟淑敏; 王冰

    2016-01-01

    In the paper, a series of new process and technology adopted in newly built No.3 3 200 m3 BF in laiwu steel are introduced, such as comprehensive technology of blast furnace longevity,multi nozzle type and fixed hopper of PW bell-less top, technology of axial cyclone deduster plus automatically discharging ash system, environmental INBA slag granulation technology, the dehumidified blast technology of BF and so on. The blast furnace was started up smoothly and reached the design product, in addition, all kinds of operation experience was happened, for example, intensified smelting, high coal ratio, large ore batch, limited production, wind-off without plan. The results were verified that every system ran normally and had better technical and economic index.%介绍了莱钢3#3200 m3高炉采用的长寿综合技术、多流嘴式料流分配器+固定料罐的PW无料钟炉顶设备、轴流旋风除尘器+吸排罐车自动卸灰系统、环保型INBA法渣处理技术、高炉脱湿鼓风技术等设计特点,高炉顺利开炉达产,历经强化冶炼、高煤比、大矿批、限产、无计划休风等不同操作实践,炉况顺行良好,各工艺系统运行正常,取得了良好的技术经济指标。

  20. Portable and Smart Ultrasonic Fluid Level Meter Based on ARM Cortex- M3%基于ARM Cortex - M3便携式智能超声波液位计

    Institute of Scientific and Technical Information of China (English)

    张根宝; 李秀平; 庞苏娟

    2012-01-01

    为了准确测量环境恶劣工业生产中的液位以保证生产效率,通过研究超声波测距工作原理,采用新型高性能、低功耗和低成本的ARM - Cortex M3内核微控制器,结合超声波技术、红外传输与DS1820温度补偿修正设计了一款便携式智能超声波液位计.其采用的先进微处理器以及无线传输的方式,简化了硬件电路,优化了软件编程.研究表明:该液位计设计提高了液位测量精度、实时性、灵活性与快速性.%To measure fluid level in poor industrial production conditions accurately for ensuring production efficiency,a portable intelligent correction ultrasonic fluid level meter was designed by studying the working principle of ultrasonic distance measurement. New high-performance, low power and low-cost ARM-Cortex M3 microcontroller core, combined with ultrasonic technology, infrared transmission and DS1820 temperature compensation were used in the level meter. The use of advanced microprocessor and wireless transmission, simplified hardware and optimized software programming. Studies show that the design of this fluid level gauge improved accuracy,timeliness,flexibility and rapidity of the level measurement.

  1. 莱钢3号3200 m3高炉设计创新与实践%Design innovation and practice of No. 3200 m3 BF in Laigang

    Institute of Scientific and Technical Information of China (English)

    王冰; 孟淑敏; 贾利军

    2016-01-01

    莱钢3号3200m3高炉设计采用了串罐无料钟炉顶、软水密闭循环冷却、炉体全覆盖冷却壁、铜冷却壁、 UCAR热压小块炭砖、改进型顶燃式热风炉、环保型INBA渣处理、轴流式旋风除尘器、环保平坦化出铁场、全干法布袋除尘、高富氧喷煤等一系列先进实用、成熟可靠、清洁环保、高效长寿的新技术设备,为实现高炉“高效、优质、低耗、长寿、环保”的目标打下了坚实的基础。%A series of advanced and suitable , mature and reliable , clean and environmentally friendly, high efficiency and long campaign techniques were adopted in the design of No. 3 3200m3 BF in Laiwu Steel, such as BLT, closed loop soft water cooling, complete coverage of furnace body cooling stave, copper cooling staves, UCAR hot pressing small pieces of carbon brick, improved top combus-tion hot blast stove, environmental friendly INBA slag treatment, axial cyclone deduster, green flat cast house, completely dry method bag deduster, high oxygen enrichment PCI, all the new technolo-gies mentioned above has laid a solid foundation for blast the target of high efficiency, high quality, low consumption, long campaign and clean environmental protection.

  2. Hearth Erosion Situation Analysis for the 1 750 m3 Blast Furnace in Jinan Steel%济钢1750 m3高炉炉缸侵蚀情况分析

    Institute of Scientific and Technical Information of China (English)

    张小伟; 张熙玮

    2015-01-01

    通过对生产条件及炉缸结构相同的济钢1#、3#1750 m3高炉炉缸侵蚀情况进行调查,发现1#高炉炉缸呈浅锅底—象脚状侵蚀,扒炉实测表明,炉缸、炉底交接处侵蚀最为严重,炭砖残存厚度最薄处仅为300 mm;3#高炉铁口附近炭砖出现不同程度裂纹,侵蚀严重处炭砖残存厚度600 mm。建议考虑炭砖的微孔度,使用高可靠性热电偶,降低炉底冷却水流量,增加炉缸冷却水流量等,以提高高炉寿命。%The hearth erosion of Jinan Steel’s No.1 and No.3 1 750 m3 BF have been investigated, although they have the same production conditions and hearth structure. It is found that the No.1 blast furnace hearth pale pot is like the foot-shaped erosion, griddle test shows junction of hearth and bottom are the most serious erosion position, the remaining thickness of the thinnest carbon brick is only 300 mm. The carbon bricks near the iron mouth of the No.3 BF have cracked to some extent, the remaining carbon brick thickness of severe erosion is 600 mm. To improve and prolong the life of the blast furnace, it is suggested that to apply the porous carbon bricks and high reliability thermocouples, reduce the cooling water flow for bottom, increase the cooling water flow of the hearth etc.

  3. Design of on-broad diagnose terminal with real-time warning based on CORTEX-M3%基于CORTEX-M3的实时车载诊断预警系统的设计

    Institute of Scientific and Technical Information of China (English)

    陈鲤文; 邹复民

    2013-01-01

    The design of ODB-II standard framework is based on embedded real-time operation and it can be realized on Cortex-M3 CPU core with uc/os II operating system. We have successful read real-time OBD-II data of vehicles from PC monitor and gather accident codes and sensor data through CAN bus, which can be used to evaluate the health of the automobiles, preventive against trouble, deduce the cost of driving and improve the driving safety. The advantage to the device is taking full account of all sorts of vehicle buses and put forward a kind of resolved scheme about remote on-boarded diagnosis in complicated vehicle circumstance.%基于嵌入式实时操作系统的OBD-Ⅱ诊断协议框架,以Cortex-M3为内核,采用uc/os Ⅱ操作系统实现了ISO15765协议,成功通过CAN总线读取了车辆的OBD-Ⅱ系统数据,通过上位机监控窗口,能实时检查汽车故障码与汽车传感器数据.可在此基础上评价汽车健康状况,并可对故障及早预防,降低行车成本,提供行车安全性;本设计充分考虑中国汽车市场主流总线发展的情况,提供了在复杂的车载环境下远程车载诊断设备的解决方案.

  4. THE INFLUENCE OF THE INGOT MOLD COOLING ON THE STRUCTURE OF SILUMINA CASTINGS AK15M3 AT VERTICAL CENTRIFUGAL CASTING

    Directory of Open Access Journals (Sweden)

    V. Yu. Stecenko

    2013-01-01

    Full Text Available Influence of ways of the mold cooling on structure of castings with diameter of 135 mm from AK15M3 silumin at vertical centrifugal casting is investigated. It is established that for production of castings with diameter 135 mm from AK15M3 silumin with high mechanical and tribotechnical properties it is necessary to apply a shaped mould with water-spray cooling at expense of cooler of 0,42 m3/h.

  5. [Morphological changes in gastric wall of mongolian gerbils following the 12-day orbital flight aboard Foton-M3].

    Science.gov (United States)

    Atiashkin, D A; Bykov, É G

    2012-01-01

    Gastric wall of Meriones unguiculatus is distinguished by species-specific properties arising from the peculiar proportion of interstitium, muscle and epithelial tissues. Exposure to the factors of the 12-d Foton-M3 flight led to microfocal lesions of the mucous coat, dystrophic developments in the acid glands, dissociation of the mucous barrier function and deterioration of its biosynthetic function. Modifications of the tinctorial properties of the interstitium reticulum in every stomach layer progressed concurrently with reductions in prismatic epithelium height, as well as in mucous and muscular layer thickness. It is assumed that existence in the low gravity aboard the Biosat stimulated involutory processes in the gastric wall. Animals of the ground synchronous control conducted in the flight equipment mockup (Kontur-L) exhibited though similar yet less pronounced changes.

  6. Conversión de diagramas de procesos en diagramas de casos de usos usando AToM3

    Directory of Open Access Journals (Sweden)

    CARLOS M. ZAPATA J.

    2005-01-01

    Full Text Available Toda pieza de software se origina en el modelo verbal, con el cual se pueden definir los diferentes modelos conceptuales que acerquen el problema a una solución. Las herramientas convencionales para la construcción de los modelos conceptuales no toman en consideración las diferentes reglas de consistencia que se pueden presentar entre los diferentes modelos. En este artículo se emplea el AToM3 como herramienta para la definición de los meta-modelos del diagrama de procesos y el diagrama de casos de uso, con el fin de reexpresar el primero para obtener algunos elementos básicos del segundo.

  7. Photometric and spectroscopic observations of the F3+M3 eclipsing binary T-Lyr0-08070

    CERN Document Server

    Cakirli, O; Sipahi, E

    2012-01-01

    The multi-color photometric and spectroscopic observations of the newly discovered eclipsing binary T-Lyr0-08070 were obtained. The resultant light and radial velocities were analysed and the absolute parameters of the components were determined. The system is composed of an F3 and an M3 main-sequence stars. Masses and radii were estimated to be 1.37$\\pm$0.23 M$_{\\odot}$ and 1.60$\\pm$0.09 R$_{\\odot}$ for the primary and 0.32$\\pm$0.04 M$_{\\odot}$ and 0.86$\\pm$0.06R$_{\\odot}$ for the secondary star. The less massive secondary component has a radius at least two times larger with respect to its mass. Using the BVJHK magnitudes of the system we estimated an interstellar reddening of 0.22 mag and a distance to the system as 479$\\pm$36 pc.

  8. Moment Tensors and their Uncertainties for M3 Earthquakes in the Geysers, California, from Waveform Modeling and First Motions

    Science.gov (United States)

    Guilhem, A.; Dreger, D. S.; Hutchings, L. J.; Johnson, L.

    2012-12-01

    We investigate moment tensor solutions and their uncertainties for magnitude (M) ~3 earthquakes located in the northwest Geysers geothermal field, California. We are exploiting an unusual opportunity where data for M~3 events have been recorded by three different networks and have moment tensor solutions calculated by three different methods. We solve for both deviatoric and full moment tensor solutions. The data sets include local short-period instruments (4.5 Hz) of the 30 stations of the Lawrence Berkeley National Laboratory (LBNL), with which we obtain waveform inversion solutions at relatively high frequencies (i.e., up to 2.5 Hz), and regionally distributed broadband stations operated by the Berkeley Seismological Laboratory (BSL), with which are used to provide waveform inversion solutions with data filtered at longer periods (i.e., > 10 sec). We also utilize the LBNL data to obtain moment tensor solutions by fitting the P-wave first motions. The USGS, LBNL, and BSL obtain different event locations, utilize different velocity models, and analyze different frequency bands and wave types (i.e., body waves for LBNL method and primarily surface waves for the BSL analysis). Preliminary results indicate that the BSL and LBNL waveform modeling analyses give similar results in terms of nodal plane characteristics, moment magnitude, and moment tensor decomposition. Analysis of the P-wave first motions recorded by LBNL stations can illuminate complexities in the source processes when compared to waveform moment tensor solutions. We discuss uncertainties in the source inversions that use broadband and/or short-period waveform modeling, and in the source inversions from first motions only. We also combine the different datasets and compare their individual importance as they can help illustrate the complex source processes happening in the Geysers. This study introduces the possibility to interpret the seismic sources as complex processes in which both shear and tensile

  9. Helix 8 and the i3 loop of the muscarinic M3 receptor are crucial sites for its regulation by the Gβ5-RGS7 complex.

    Science.gov (United States)

    Karpinsky-Semper, Darla; Tayou, Junior; Levay, Konstantin; Schuchardt, Brett J; Bhat, Vikas; Volmar, Claude-Henry; Farooq, Amjad; Slepak, Vladlen Z

    2015-02-01

    The muscarinic M3 receptor (M3R) is a Gq-coupled receptor and is known to interact with many intracellular regulatory proteins. One of these molecules is Gβ5-RGS7, the permanently associated heterodimer of G protein β-subunit Gβ5 and RGS7, a regulator of G protein signaling. Gβ5-RGS7 can attenuate M3R-stimulated release of Ca(2+) from intracellular stores or enhance the influx of Ca(2+) across the plasma membrane. Here we show that deletion of amino acids 304-345 from the central portion of the i3 loop renders M3R insensitive to regulation by Gβ5-RGS7. In addition to the i3 loop, interaction of M3R with Gβ5-RGS7 requires helix 8. According to circular dichroism spectroscopy, the peptide corresponding to amino acids 548-567 in the C-terminus of M3R assumes an α-helical conformation. Substitution of Thr553 and Leu558 with Pro residues disrupts this α-helix and abolished binding to Gβ5-RGS7. Introduction of the double Pro substitution into full-length M3R (M3R(TP/LP)) prevents trafficking of the receptor to the cell surface. Using atropine or other antagonists as pharmacologic chaperones, we were able to increase the level of surface expression of the TP/LP mutant to levels comparable to that of wild-type M3R. However, M3R-stimulated calcium signaling is still severely compromised. These results show that the interaction of M3R with Gβ5-RGS7 requires helix 8 and the central portion of the i3 loop.

  10. Development of cooling and cleaning systems for enhanced gas ...

    African Journals Online (AJOL)

    Development of cooling and cleaning systems for enhanced gas quality for 3.7 ... The pollutants generated from gasification include particulate matter, tars, ... Air and gas flow rates were measured to be 18.8 m3/h and 20.12 kg/h respectively.

  11. Biological off-gas treatment: let's make things better

    NARCIS (Netherlands)

    Groenestijn, J.W. van

    1998-01-01

    Biological off-gas treatment is the most effective cleaning method for many off-gases which contain low concentration of pollutants (<5 g/m3). The world market share in off-gas treatment is a few percent. Potential buyers are reserved because of existing biofilter quality differences and lack of exp

  12. Biological off-gas treatment: let's make things better

    NARCIS (Netherlands)

    Groenestijn, J.W. van

    1998-01-01

    Biological off-gas treatment is the most effective cleaning method for many off-gases which contain low concentration of pollutants (<5 g/m3). The world market share in off-gas treatment is a few percent. Potential buyers are reserved because of existing biofilter quality differences and lack of

  13. Design of Dynamic Electrocardiogram Based on ARM Cortex-M3%基于ARM Cortex-M3的动态心电图机设计

    Institute of Scientific and Technical Information of China (English)

    谢建华; 刘海波; 刘瑞芳

    2012-01-01

    In order to enrich the product categories and function of the dynamic electrocardiogram,a new type of dynamic electrocardiogram product based on ARM (Advanced RISC Machines) Cortex-M3 is developed. The system hardware consists a processor minimum system,bioelectricity amplification module, storage module,LCD(Liquid Crstal Display) and touch screen module,high speed USB interface and the power module. For the system software, the platform was build based on CooCox CoOS embedded realtime operating system, the file system and USB middleware. The man-machine interface is realized by transplanting uC/GUI. The experiment results showed that the system could be used to control ECG signal collection,great capacity data storage and high-speed upload. The graphical user interface and real time waveform display are the innovative points.%针对目前动态心电图机产品种类和功能单一的现状,研制了基于ARM(Advanced RISC Machines) Cortex-M3的新型动态心电图机.硬件主要由处理器最小系统、生物电放大模块、存储模块、LCD (Liquid Cgstal Display)和触摸屏模块、高速USB接口和电源模块构成.软件开发基于CooCox CoOS嵌入式实时操作系统,同时使用了文件系统和USB等中间件.移植uC/GUI实现人机接口设计.测试结果表明,该系统不但实现了心电信号采集、大容量数据存储和高速上传的功能,而且创新性地增加了图形用户界面和实时波形显示功能.

  14. Car Design of WiFi Internet of Things Based on SCM Cortex-M3%基于Cortex-M3单片机的WiFi物联网小车的设计

    Institute of Scientific and Technical Information of China (English)

    汤莉莉; 黄伟; 王春波; 方规

    2014-01-01

    使用无线互联网WiFi技术,采集小车上传感器的相关数据,并做相应的处理和控制,实现远程控制和监控功能。研究的范围包括Cortex-M3内核的LPC1768单片机软件的编程,单片机温度、速度、视屏的采集处理和传输,电脑软件的编程, Windows环境下的视屏处理、模拟速度表盘和模拟温度计的设计与实现以及TCP/IP通信实现等。方案采用自下而上的模块化编程方法,对温度和速度测试模块进行了模拟测试,对WiFi通信机制做了大量的数据分析,实现用电脑软件通过无线WiFi控制小车的运动、采集相关信息并显示等功能。%The purpose of this design is to use wireless Internet WiFi technology to collect the related data of car sensor,perform appropriate process and control,and ultimately realize remote control and monitoring functions.The study covers the SCM LPC1768 soft-ware programming of Cortex-M3 core,and the temperature,speed,screen capture processing and transmission of SCM,together with the design and implementation of screen processing,analog dial of speed,analog thermometer and TCP/IP communication under Windows environments.The scheme uses a bottom-up modular programming method to implement the simulation and test for temperature and speed testing module,perform much of data analysis of WiFi communication mechanism,and finally use computer software to achieve the control the car′s movement,collect and display relevant information through wireless WiFi.

  15. Design of mine DC electrical prospecting instrument based on ARM Cortex-M3 core%基于ARM Cortex-M3内核矿井直流电法仪的研制

    Institute of Scientific and Technical Information of China (English)

    宁殿艳; 张仲礼; 王继矿; 汪凯斌; 李超

    2011-01-01

    DC electrical prospecting instrument has played an important role in preventing mine water disaster, but the traditional DC electrical prospecting instrument has some disadvantages such as high power consumption, small storage capacity, hard operation and difficulty to carry, for it is mostly developed utilizing MCS -51 microcontroller. These restrict the application of DC electrical prospecting instrument to a certain extent. This article begins with the working principle of mine DC electrical, improves the traditional DC electrical prospecting instrument utilizing STM32 microcomputer based on Cortex - M3 core and 24 - bit Σ - A ADC component, and redesigns the hardware and software of mine DC eldetrieal instrument. The improved instrument has the advantage of high accuracy, low cost, low power consumption, large storage capacity, convenient communication and friendly man-machine interface compared with traditional DC electrical prospecting instrument.%直流电法仪在预防煤矿水害中发挥重要作用,但传统直流电法仪的核心芯片多采用51系列单片机,具有功耗大、存储容量小、操作不方便,难以携带等缺点,在一定程度上制约了直流电法仪的应用.文中从矿井直流电法仪的工作原理出发,采用基于ARM Cortex-M3内核的STM32处理器和基于Σ-Δ技术的24位高分辨率ADC器件对传统矿井直流电法仪进行了升级、改造,重新设计了硬件电路和软件程序.与传统矿井直流电法仪相比,新设计的直流电法仪具有精度高、成本低、功耗小、存储容量大、通讯方便和人机界面友好等优点.

  16. 77 FR 76598 - Notice of Receipt of Petition for Decision That Nonconforming 2006-2010 BMW M3 Passenger Cars Are...

    Science.gov (United States)

    2012-12-28

    ... vehicles that are not already so equipped; and (b) replacement of any non U.S.- model air bags, air bag...-2010 BMW M3 Passenger Cars Are Eligible for Importation AGENCY: National Highway Traffic Safety...-2010 BMW M3 passenger cars that were not originally manufactured to comply with all applicable Federal...

  17. 某10万m3钢储罐罐体变形的修复措施%The Rectification Methodof 100,000 m3 Steel Oil Storage Tank Wall Deformation

    Institute of Scientific and Technical Information of China (English)

    应付钊; 丁伟

    2013-01-01

    The differential settlement of tank foundation or low quality tank erection will cause wall deformation of steel oil storage tank, the low quality tank erection will have greater effect on the lifting of floating roof than the differential settlement of tank foundation. In the paper, the reason causing wall deformation and rectification method were introduced, some questions that need considered during steel oil storage tank erection and high pressure filling method of cavity which is between tank bottom plate and tank foundation were pointed. Finally, some referable conclusions are obtained.%地基不均匀沉降和安装不当均会引起钢储罐罐体变形,安装不当引起的罐体变形比罐基础不均匀沉降造成的罐体变形对浮船升降影响可能更大.通过对某10万m3钢储罐产生罐壁变形的原因分析和纠偏措施介绍,提出了一些大型储罐在安装过程中应注意的问题,给出了罐体顶升后间隙采用高压吹填的处理措施,对同类工程设计有一定的借鉴意义.

  18. 基于nRF24L01和Cortex-M3的无线测控系统%Wireless measurement and control system based on nRF24L01 and Cortex-M3

    Institute of Scientific and Technical Information of China (English)

    袁正道; 董丽莎; 王家斌

    2012-01-01

      在井下抢险或其它搜救现场,通常都需要一种远程遥测系统来取代人工进入一些危险场所。文中提出了一种基于nRF24L01和Cortex的无线测控系统的开发方法,简要讨论了其结构和开发原理,并详细介绍了该测控系统的硬件构造和软件开发流程%  On the downhole resuce and other rescue spot, a remote-measuring system is used to enter into the dangerous areas instead of persons. A design scheme of wireless measurement and control system based on RF24L01 and Cortex-M3 is given in the paper. In the paper a brief discussion on the structure and development principles of the system is made and the hardware construction and software development process are introduced in detail.

  19. Tilting structures in inverse perovskites, M3TtO (M = Ca, Sr, Ba, Eu; Tt = Si, Ge, Sn, Pb).

    Science.gov (United States)

    Nuss, Jürgen; Mühle, Claus; Hayama, Kyouhei; Abdolazimi, Vahideh; Takagi, Hidenori

    2015-06-01

    Single-crystal X-ray diffraction experiments were performed for a series of inverse perovskites, M3TtO (M = Ca, Sr, Ba, Eu; Tt = tetrel element: Si, Ge, Sn, Pb) in the temperature range 500-50 K. For Tt = Sn, Pb, they crystallize as an 'ideal' perovskite-type structure (Pm3m, cP5); however, all of them show distinct anisotropies of the displacement ellipsoids of the M atoms at room temperature. This behavior vanishes on cooling for M = Ca, Sr, Eu, and the structures can be regarded as `ideal' cubic perovskites at 50 K. The anisotropies of the displacement ellipsoids are much more enhanced in the case of the Ba compounds. Finally, their structures undergo a phase transition at ∼ 150 K. They change from cubic to orthorhombic (Ibmm, oI20) upon cooling, with slightly tilted OBa6 octahedra, and bonding angles O-Ba-O ≃ 174° (100 K). For the larger Ba(2+) cations, the structural changes are in agreement with smaller tolerance factors (t) as defined by Goldschmidt. Similar structural behavior is observed for Ca3TtO. Smaller Tt(4-) anions (Si, Ge) introduce reduced tolerance factors. Both compounds Ca3SiO and Ca3GeO with cubic structures at 500 K, change into orthorhombic (Ibmm) at room temperature. Whereby, Ca3SiO is the only representative within the M3TtO family where three polymorphs can be found within the temperature range 500-50 K: Pm3m-Ibmm-Pbnm. They show tiny differences in the tilting of the OCa6 octahedra, expressed by O-Ca-O bond angles of 180° (500 K), ∼ 174° (295 K) and 170° (100 K). For larger M (Sr, Eu, Ba), together with smaller Tt (Si, Ge) atoms, pronounced tilting of the OM6 octahedra, and bonding angles of O-M-O ≃ 160° (295 K) are observed. They crystallize in the anti-GdFeO3 type of structure (Pbnm, oP20), and no phase transitions occur between 500 and 50 K. The observed phase transitions are all accompanied by multiple twinning, in terms of pseudo-merohedry or reticular pseudo-merohedry.

  20. GABA(A) receptor M2-M3 loop secondary structure and changes in accessibility during channel gating.

    Science.gov (United States)

    Bera, Amal K; Chatav, Maya; Akabas, Myles H

    2002-11-08

    The gamma-aminobutyric acid type A (GABA(A)) receptor M2-M3 loop structure and its role in gating were investigated using the substituted cysteine accessibility method. Residues from alpha(1)Arg-273 to alpha(1)Ile-289 were mutated to cysteine, one at a time. MTSET(+) or MTSES(-) reacted with all mutants from alpha(1)R273C to alpha(1)Y281C, except alpha(1)P277C, in the absence and presence of GABA. The MTSET(+) closed-state reaction rate was >1000 liters/mol-s at alpha(1)N274C, alpha(1)S275C, alpha(1)K278C, and alpha(1)Y281C and was <300 liters/mol-s at alpha(1)R273C, alpha(1)L276C, alpha(1)V279C, alpha(1)A280C, and alpha(1)A284C. These two groups of residues lie on opposite sides of an alpha-helix. The fast reacting group lies on a continuation of the M2 segment channel-lining helix face. This suggests that the M2 segment alpha-helix extends about two helical turns beyond alpha(1)N274 (20'), aligned with the extracellular ring of charge. At alpha(1)S275C, alpha(1)V279C, alpha(1)A280C, and alpha(1)A284C the reaction rate was faster in the presence of GABA. The reagents had no functional effect on the mutants from alpha(1)A282C to alpha(1)I289C, except alpha(1)A284C. Access may be sterically hindered possibly by close interaction with the extracellular domain. We suggest that the M2 segment alpha-helix extends beyond the predicted extracellular end of the M2 segment and that gating induces a conformational change in and/or around the N-terminal half of the M2-M3 loop. Implications for coupling ligand-evoked conformational changes in the extracellular domain to channel gating in the membrane-spanning domain are discussed.

  1. Requirements for gas quality and gas appliances

    NARCIS (Netherlands)

    Levinsky, Howard; Gersen, Sander; Kiewiet, Bert

    2015-01-01

    Introduction The gas transmission network in the Netherlands transports two different qualities of gas, low-calorific gas known as G-gas or L-gas and, high calorific gas (H-gas). These two gas qualities are transported in separate networks, and are connected by means of five blending and conversion

  2. Molecular organization of the complex between the muscarinic M3 receptor and the regulator of G protein signaling, Gbeta(5)-RGS7.

    Science.gov (United States)

    Sandiford, Simone L; Wang, Qiang; Levay, Konstantin; Buchwald, Peter; Slepak, Vladlen Z

    2010-06-22

    The complex of the regulator of G protein signaling (RGS), Gbeta(5)-RGS7, can inhibit signal transduction via the M3 muscarinic acetylcholine receptor (M3R). RGS7 consists of three distinct structural entities: the DEP domain and its extension DHEX, the Ggamma-like (GGL) domain, which is permanently bound to Gbeta subunit Gbeta(5), and the RGS domain responsible for the interaction with Galpha subunits. Inhibition of the M3R by Gbeta(5)-RGS7 is independent of the RGS domain but requires binding of the DEP domain to the third intracellular loop of the receptor. Recent studies identified the dynamic intramolecular interaction between the Gbeta(5) and DEP domains, which suggested that the Gbeta(5)-RGS7 dimer could alternate between the "open" and "closed" conformations. Here, we identified point mutations that weaken DEP-Gbeta(5) binding, presumably stabilizing the open state, and tested their effects on the interaction of Gbeta(5)-RGS7 with the M3R. We found that these mutations facilitated binding of Gbeta(5)-RGS7 to the recombinant third intracellular loop of the M3R but did not enhance its ability to inhibit M3R-mediated Ca(2+) mobilization. This led us to the idea that the M3R can effectively induce the Gbeta(5)-RGS7 dimer to open; such a mechanism would require a region of the receptor distinct from the third loop. Indeed, we found that the C-terminus of M3R interacts with Gbeta(5)-RGS7. Truncation of the C-terminus rendered the M3R insensitive to inhibition by wild-type Gbeta(5)-RGS7; however, the open mutant of Gbeta(5)-RGS7 was able to inhibit signaling by the truncated M3R. The GST fusion of the M3R C-tail could not bind to wild-type Gbeta(5)-RGS7 but could associate with its open mutant as well as with the separated recombinant DEP domain or Gbeta(5). Taken together, our data are consistent with the following model: interaction of the M3R with Gbeta(5)-RGS7 causes the DEP domain and Gbeta(5) to dissociate from each other and bind to the C-tail, and the DEP

  3. 基于Cortex-M3的电池内阻检测系统设计与实现%Design and implementation of battery internal resistance detection system based on Cortex-M3

    Institute of Scientific and Technical Information of China (English)

    张乐芳; 荆炳礼; 任志宏

    2015-01-01

    以电池为能源的各类电气设备,在工业生产、交通、军事、通信等领域广泛应用,电池性能对电子、电气设备的正常运行具有极其重要的作用。电池在使用过程中,其性能和容量会随充放电次数的增加而下降,所以,定期维护及检验电池性能,是保证电器设备可靠工作的重要内容。电池内阻是检验电池性能和容量的重要参数,通过内阻检测评估电池性能和容量参数,也是科学研究和工业应用的基本原理。电池内阻测量的常用方法一般采用电位差原理。但是,该测量方法对于大型设备的高容量电池存在测量误差大、发热、易损电池等弊端。本文采用基于Cortex-M3核32位微处理微计算机控制和电位差原理的智能内阻测量系统,实现了大容量电池的精确、快速、安全测量和高度智能化的故障诊断功能,具有重要的科学研究意义及实用价值。%All kinds of electrical equipment which use battery as energy sources, are widely used in the industrial production, transportation, military, communications and other fields. And the battery performance is of great importance to normal operation of electrical and electronic equipment. Because the performance and capacity of battery decreases with the increasing number of charge cycles and discharge, the regular maintenance and test of battery performance is the important to guarantee working reliability of electrical equipment. Evaluation battery performance and capacity by testing battery internal resistance, which is the vital parameter for battery performance and capacity, is the basic principles of scientific research and industrial application. Potential difference principle is common method to measure battery internal resistance, but in which the disadvantage is that causing large measurement error, producing heat and damaging battery easily for the large capacity battery of large equipment. In this

  4. Tests of shielding effectiveness of Kevlar and Nextel onboard the International Space Station and the Foton-M3 capsule.

    Science.gov (United States)

    Pugliese, M; Bengin, V; Casolino, M; Roca, V; Zanini, A; Durante, M

    2010-08-01

    Radiation assessment and protection in space is the first step in planning future missions to the Moon and Mars, where mission and number of space travelers will increase and the protection of the geomagnetic shielding against the cosmic radiation will be absent. In this framework, the shielding effectiveness of two flexible materials, Kevlar and Nextel, were tested, which are largely used in the construction of spacecrafts. Accelerator-based tests clearly demonstrated that Kevlar is an excellent shield for heavy ions, close to polyethylene, whereas Nextel shows poor shielding characteristics. Measurements on flight performed onboard of the International Space Station and of the Foton-M3 capsule have been carried out with special attention to the neutron component; shielded and unshielded detectors (thermoluminescence dosemeters, bubble detectors) were exposed to a real radiation environment to test the shielding properties of the materials under study. The results indicate no significant effects of shielding, suggesting that thin shields in low-Earth Orbit have little effect on absorbed dose.

  5. [Morphofunctional state of hepatocytes nuclear apparatus in Mongolian herbils after the flight on space apparatus Foton-M3].

    Science.gov (United States)

    Atiakshin, D A; Il'in, E A; Pashkov, A N

    2010-01-01

    Morphofunctional state of hepatocytes nuclear apparatus was analyzed in the liver of Mongolian gerbils Meriones unguiculatus returned from 12-d space flight of Foton-M3 (SF) and their vivarium and ground synchronous controls. Volume, ploidy and number of hepatocyte nuclei, nucleolus dimensions and number as well as contacts with karyolemma were determined in the central, intermediate and peripheral areas of the liver classical lobe. Also, total number of mitoses and amitoses was determined in the liver parenchyma. The vivarium control animals displayed specifics of the nucleus apparatus structure that depended on intralobe topography. Based on the selected criteria, high functional activity was characteristic of cells in the intermediate area. According to the criteria, nuclear apparatus in the synchronous control tended to down the functional activity The adaptive adjustment of nuclei in SF seemed to have been initiated by changes in the hepatic blood flow: volumes of hepatocyte nuclei and nucleoli increased as did the number of nuclei in cell, whereas ploidy made a decrease, especially in the intermediate area. Under the SF conditions, particularly important compensatory mechanism for the liver function was intensification of amitosis and consequent increase of the population of dinuclear hepatocytes.

  6. Full Stokes observations in the He I 1083 nm spectral region covering an M3.2 flare

    CERN Document Server

    Kuckein, C; Sainz, R Manso; Ramos, A Asensio

    2015-01-01

    We present an exceptional data set acquired with the Vacuum Tower Telescope (Tenerife, Spain) covering the pre-flare, flare, and post-flare stages of an M3.2 flare. The full Stokes spectropolarimetric observations were recorded with the Tenerife Infrared Polarimeter in the He I 1083.0 nm spectral region. The object under study was active region NOAA 11748 on 2013 May 17. During the flare the chomospheric He I 1083.0 nm intensity goes strongly into emission. However, the nearby photospheric Si I 1082.7 nm spectral line profile only gets shallower and stays in absorption. Linear polarization (Stokes Q and U) is detected in all lines of the He I triplet during the flare. Moreover, the circular polarization (Stokes V) is dominant during the flare, being the blue component of the He I triplet much stronger than the red component, and both are stronger than the Si I Stokes V profile. The Si I inversions reveal enormous changes of the photospheric magnetic field during the flare. Before the flare magnetic field conc...

  7. Reactor performance of a 750 m(3) anaerobic digestion plant: varied substrate input conditions impacting methanogenic community.

    Science.gov (United States)

    Wagner, Andreas Otto; Malin, Cornelia; Lins, Philipp; Gstraunthaler, Gudrun; Illmer, Paul

    2014-10-01

    A 750 m(3) anaerobic digester was studied over a half year period including a shift from good reactor performance to a reduced one. Various abiotic parameters like volatile fatty acids (VFA) (formic-, acetic-, propionic-, (iso-)butyric-, (iso-)valeric-, lactic acid), total C, total N, NH4 -N, and total proteins, as well as the organic matter content and dry mass were determined. In addition several process parameters such as temperature, pH, retention time and input of substrate and the concentrations of CH4, H2, CO2 and H2S within the reactor were monitored continuously. The present study aimed at the investigation of the abundance of acetogens and total cell numbers and the microbial methanogenic community as derived from PCR-dHPLC analysis in order to put it into context with the determined abiotic parameters. An influence of substrate quantity on the efficiency of the anaerobic digestion process was found as well as a shift from a hydrogenotrophic in times of good reactor performance towards an acetoclastic dominated methanogenic community in times of reduced reactor performance. After the change in substrate conditions it took the methano-archaeal community about 5-6 weeks to be affected but then changes occurred quickly.

  8. Gas magnetometer

    Science.gov (United States)

    Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

    2016-05-03

    Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

  9. Gas magnetometer

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

    2016-05-03

    Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

  10. Gas chromatography

    Science.gov (United States)

    Guiochon, Georges; Guillemin, Claude L.

    1990-11-01

    Gas chromatography is a powerful separation technique for gas and vapor mixtures. Combining separation and on-line detection permits accurate quantitative analysis of complex mixtures, including traces of compounds down to parts per trillions in some particular cases. The importance of gas chromatography in quality control and process control in the chemical and drug industry, in environmental pollution investigations and in clinical analysis is critical. The principles of the technique are discussed, the main components of a gas chromatograph are described and some idea of the importance of the applications is given.

  11. Engineering Design of Shaanxi-Beijing Gas Pipeline

    Institute of Scientific and Technical Information of China (English)

    Xiang Bo; Mei Sanqiang; Wang Wei

    1996-01-01

    @@ Steel pipes of Φ660×60 are used in the gas pipeline,totaling 860 km in length,from Shaan-Gan-Ning gas field,to Beijing(Shaan-Jing pipeline for short).The maximum operating pressure of the pipeline is designed to be 6.3Mpa,and the maximum annual natural gas deliverability is set to be 2×109m3.

  12. Gas Release as a Deformation Signal

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Stephen J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-09-01

    Radiogenic noble gases are contained in crustal rock at inter and intra granular sites. The gas composition depends on lithology, geologic history, fluid phases, and the aging effect by decay of U, Th, and K. The isotopic signature of noble gases found in rocks is vastly different than that of the atmosphere which is contributed by a variety of sources. When rock is subjected to stress conditions exceeding about half its yield strength, micro-cracks begin to form. As rock deformation progresses a fracture network evolves, releasing trapped noble gases and changing the transport properties to gas migration. Thus, changes in gas emanation and noble gas composition from rocks could be used to infer changes in stress-state and deformation. The purpose of this study has been to evaluate the effect of deformation/strain rate upon noble gas release. Four triaxial experiments were attempted for a strain rate range of %7E10-8 /s (180,000s) to %7E 10-4/s (500s); the three fully successful experiments (at the faster strain rates) imply the following: (1) helium is measurably released for all strain rates during deformation, this release is in amounts 1-2 orders of magnitude greater than that present in the air, and (2) helium gas release increases with decreasing strain rate.

  13. Induced electrostatic confinement of electron gas in W-designed strain-compensated Si/Si{sub 1-} {sub x} Ge {sub x} /Si type-II quantum wells

    Energy Technology Data Exchange (ETDEWEB)

    Sfina, N. [Unite de Physique des Solides, Departement de Physique, Faculte des Sciences de Monastir, Avenue de l' Environnement, 5019 Monastir (Tunisia)]. E-mail: sfina_fsm@yahoo.fr; Lazzari, J.-L. [Centre de Recherche en Matiere Condensee et Nanosciences, CRMC-N, UPR-CNRS 7251, Laboratory associated with the Universite de la Mediterranee and the Universite Paul Cezanne, Campus de Luminy, Case 913, 13288 Marseille cedex 9 (France); Christol, P. [Centre d' Electronique et de Micro-optoelectronique de Montpellier, CEM2, UMR-CNRS 5507, Universite Montpellier 2-Sciences et Techniques du Languedoc, CC 067, Place Eugene Bataillon, 34095 Montpellier cedex 5 (France); Cuminal, Y. [Centre d' Electronique et de Micro-optoelectronique de Montpellier, CEM2, UMR-CNRS 5507, Universite Montpellier 2-Sciences et Techniques du Languedoc, CC 067, Place Eugene Bataillon, 34095 Montpellier cedex 5 (France); Said, M. [Unite de Physique des Solides, Departement de Physique, Faculte des Sciences de Monastir, Avenue de l' Environnement, 5019 Monastir (Tunisia)

    2006-12-15

    We present a numerical modeling of the conduction- and the valence-band diagrams of W designed Si/Si{sub 0.4}Ge{sub 0.6}/Si type II quantum wells. These W structures, strain-compensated on relaxed Si{sub 0.75}Ge{sub 0.25} pseudo-substrates, are potentially interesting for emission and photo-detection around a 1.55{mu}m wavelength. Two main features have been extrapolated by solving self-consistently Schroedinger and Poisson equations, taking into account the electrostatic attraction induced by carrier injection: (i) Coulomb attraction strongly modifies the band profiles and increases the electron probability density at the quantum well interfaces. (ii) The injected carrier concentration enhances the in-plane oscillator strength and the electron-hole wave-function overlap.

  14. Changing M3G/M6G ratios and pharmacodynamics in a cancer patient during long-term morphine treatment

    DEFF Research Database (Denmark)

    Andersen, Gertrud; Christrup, Lona Louring; Sjøgren, Per;

    2002-01-01

    A cancer patient receiving long-term oral sustained-release morphine treatment and periodically presenting with unusually high plasma M3G/M6G ratios is described. We found the patient's formation of M6G more unstable and perhaps delayed compared to the formation of M3G. There is no apparent...... explanation for this phenomenon and the high M3G/M6G ratios had no implications for the patient's pain experience or side effects from the morphine treatment....

  15. Progress in TMT M3 system%TMT 望远镜三镜系统的研究进展

    Institute of Scientific and Technical Information of China (English)

    王富国; 杨飞; 赵宏超; 苏燕芹; 陈宝刚

    2013-01-01

    介绍30 m望远镜(TMT)的相关背景以及我国在TMT项目中承担的任务。从TMT三镜系统的总体要求出发,论述了三镜系统的两个主要部分(M3CA和M3PA)的具体要求、技术难点以及初步方案。针对M3CA,介绍了底支撑方案和侧支撑方案,采用Kinematic的底支撑方案时其面形精度RMS可以达到109.7 nm,SlopeRMS为0.95μrad,采用Kinematic的侧支撑方案时其面形精度RMS<15 nm,一阶谐振频率等于17.7 Hz,均达到了设计要求。针对M3PA,介绍了Tilt轴系和Rotator轴系的方案。最后,简要介绍了三镜控制系统(M3CS)的要求和目标。%The background of Thirty Meter Telescope(TMT) and its mission that we should take in hand are introdced.The detailed specifications and the preliminary scheme for the M 3CA and M3PA in the 3 mirror (M3) system are presented according to the general specification .Then, the two parts,axial support and later-al support of M3CA, are designed in detail.Due to the kinematic concept design used in both of axial support and lateral support, the mirror surface error can be reduced in a acceptable level .When the kinematic axial support scheme is taken, its surface accuracy RMS is 109.7 nm and Slope RMS is 0.95μrad, while the kine-matic lateral support scheme is taken, its surface accuracy RMS is 15 nm,and the first natural frequency can reach to 17.7 Hz.The design proposal for M3PA is discussed and the control system for M3 system(M3CS) is introduced briefly.

  16. 基于MDK RTX的Cortex-M3多任务应用设计%Multi-task Application Design Based on MDK RTX

    Institute of Scientific and Technical Information of China (English)

    方安平; 武永谊

    2008-01-01

    MDK RL-RTX是ARM公司推出的最新实时多任务内核,Cortex-M3是ARM公司最新发布的嵌入式处理器.将RL-RTX实时多任务内核应用到Cortex-M3处理器上,可大大提高代码密度,减少系统内存,提升系统性能.本文介绍了RL-RTX在Cortex-M3上的移植以及多任务应用设计方法.

  17. Using Predefined M3(μ3-O) Clusters as Building Blocks for an Isostructural Series of Metal-Organic Frameworks.

    Science.gov (United States)

    Peng, Li; Asgari, Mehrdad; Mieville, Pascal; Schouwink, Pascal; Bulut, Safak; Sun, Daniel T; Zhou, Zhongrui; Pattison, Philip; van Beek, Wouter; Queen, Wendy L

    2017-07-19

    Metal-organic frameworks (MOFs) have attracted much attention in the past decade owing to their unprecedented internal surface areas, tunable topologies, designable surfaces, and various potential applications. One bottleneck in the field regarding MOF synthesis is controlling the metal-containing secondary building unit (SBU) incorporated into the structure. In this work we report the synthesis and characterization of five trimeric [M3(μ3-O)(CH3CO2)6](x) clusters (where M = Fe(3+), Cr(3+), Fe(3+)/Cr(3+), Fe(3+)/Co(2+), or Fe(3+)/Ni(2+) and x = +1 or 0). The monocarboxylate capping ligand, acetate in this case, readily undergoes exchange with several difunctional counterparts, including 1,4-benzenedicarboxylic acid (H2-BDC) and biphenyl-4,4'-dicarboxylic acid (H2-BPDC), for the formation of an isostructural series of MOFs, several of which are newly reported (for M = Fe(3+)/Cr(3+), Fe(3+)/Co(2+), and Fe(3+)/Ni(2+)) and show excellent CO2 adsorption properties. In this report, a host of techniques including NMR, ICP, and ESI-MS are used to probe the ligand exchange process and composition of the SBUs, and XAS is used to monitor the Fe(3+) and Cr(3+) environment throughout the reactions, giving strong evidence that the clusters stay intact throughout the MOF synthesis. This work reveals that predefined SBUs is an effective means to create metal-substituted analogues of known frameworks. Further, CO adsorption and in situ IR are used to probe accessibility of the metals after solvent removal. We show for the first time that the incorporation of the neutral clusters, containing weaker Lewis acids like Ni(2+) and Co(2+), can promote the formation of open metal sites in the MOF frameworks, structural features known to enhance the binding energy of small guest molecules like CO2.

  18. Enhancement of two dimensional electron gas concentrations due to Si{sub 3}N{sub 4} passivation on Al{sub 0.3}Ga{sub 0.7}N/GaN heterostructure: strain and interface capacitance analysis

    Energy Technology Data Exchange (ETDEWEB)

    Dinara, Syed Mukulika, E-mail: smdinara.iit@gmail.com; Jana, Sanjay Kr.; Ghosh, Saptarsi; Mukhopadhyay, Partha; Kumar, Rahul [Advanced Technology Development Centre, Indian Institute of Technology, Kharagpur, India 721302 (India); Chakraborty, Apurba; Biswas, Dhrubes [Dept. of Electronics and Electrical Communication Engineering, Indian Institute of Technology, Kharagpur, India 721 302 (India); Bhattacharya, Sekhar [SSN Research Center, Tamilnadu, India 603110 (India)

    2015-04-15

    Enhancement of two dimensional electron gas (2DEG) concentrations at Al{sub 0.3}Ga{sub 0.7}N/GaN hetero interface after a-Si{sub 3}N{sub 4} (SiN) passivation has been investigated from non-destructive High Resolution X-ray Diffraction (HRXRD) analysis, depletion depth and capacitance-voltage (C-V) profile measurement. The crystalline quality and strained in-plane lattice parameters of Al{sub 0.3}Ga{sub 0.7}N and GaN were evaluated from double axis (002) symmetric (ω-2θ) diffraction scan and double axis (105) asymmetric reciprocal space mapping (DA RSM) which revealed that the tensile strain of the Al{sub 0.3}Ga{sub 0.7}N layer increased by 15.6% after SiN passivation. In accordance with the predictions from theoretical solution of Schrödinger-Poisson’s equations, both electrochemical capacitance voltage (ECV) depletion depth profile and C-V characteristics analyses were performed which implied effective 9.5% increase in 2DEG carrier density after passivation. The enhancement of polarization charges results from increased tensile strain in the Al{sub 0.3}Ga{sub 0.7}N layer and also due to the decreased surface states at the interface of SiN/Al{sub 0.3}Ga{sub 0.7}N layer, effectively improving the carrier confinement at the interface.

  19. Obturator internus muscle strains

    Directory of Open Access Journals (Sweden)

    Caoimhe Byrne, MB BCh, BAO

    2017-03-01

    Full Text Available We report 2 cases of obturator internus muscle strains. The injuries occurred in young male athletes involved in kicking sports. Case 1 details an acute obturator internus muscle strain with associated adductor longus strain. Case 2 details an overuse injury of the bilateral obturator internus muscles. In each case, magnetic resonance imaging played a crucial role in accurate diagnosis.

  20. Shewanella strain isolated from black powder

    Energy Technology Data Exchange (ETDEWEB)

    Lutterbach, Marcia T.S.; Contador, Luciana S.; Oliveira, Ana Lucia C.; Galvao, Mariana M. [National Institute of Technology (INT), Rio de Janeiro, RJ (Brazil); Pimenta, Gutemberg S. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Black powder is a term frequently used to refer to residues formed by various types of iron sulfides mixed with contaminants eventually present in the natural gas flow. According to some researchers, the occurrence of black powder in gas pipelines, besides its chemical corrosion origin, can be directly related to the sulfate-reducing bacteria (SRB) metabolism in this environment. A black powder sample was inoculated in a Post gate E medium modified with the addition of thioglycolate. The resulting positive culture was kept in the laboratory for four years until its use. A dilution technique was then performed aiming to isolate an SRB strain. The bacterial strain isolated and identified through DNA sequencing was not an SRB but rather a Shewanella sp. Compared to the sulfate-reducing bacteria group-traditionally considered the foremost responsible for microbially-influenced corrosion (MIC) - Shewanella is a facultative anaerobe and has a versatile metabolism. Shewanella is able to reduce ferric iron and sulfite, oxidize hydrogen gas, and produce hydrogen sulfide; therefore, these bacteria can be responsible for MIC and pit formation. The isolated Shewanella was used in a corrosion experiment, and the corrosion products were characterized by X-ray diffraction, identifying iron sulfides, iron oxides, and sulfur. Our results indicate that the strain isolated, S. putrefaciens, plays a key role in corrosion problems in gas pipelines. (author)

  1. A comparison between immunofluorescence staining on smears from Membrana nictitans (M3 test), immunohistopathology and routine pathology in cats with suspected feline infectious peritonitis (FIP).

    Science.gov (United States)

    Hök, K

    1991-01-01

    An indirect immunofluorescence method using smears from membrana nictitans (M3 test) to diagnose feline corona virus (FCV) infection was compared with immunohistopathology (using indirect immunofluorescence assay (IFFA) performed on organs (IFO], and routine pathology (RP) in cats with suspected feline infectious peritonitis (FIP). A close correlation between the 2 immunofluorescence methods (IFO and M3) was observed. Although the M3 test requires samples from only 1 organ per animal, both the sensitivity and specificity were high (80%), when compared to IFO (using samples from an average of 5 organs per animal). In 21% of the cats with suspected FIP typical pathological lesions were found. As the M3 test is relatively easy to perform, it could reduce work-load of pathology laboratories and provide valuable data for clinical and epidemiological use.

  2. M3FT-15OR0202237: Submit Report on Results From Initial Coating Layer Development For UN TRISO Particles

    Energy Technology Data Exchange (ETDEWEB)

    Jolly, Brian C [ORNL; Lindemer, Terrence [Harbach Engineering and Solutions; Terrani, Kurt A [ORNL

    2015-02-01

    In support of fully ceramic matrix (FCM) fuel development, coating development work has begun at the Oak Ridge National Laboratory (ORNL) to produce tri-isotropic (TRISO) coated fuel particles with UN kernels. The nitride kernels are used to increase heavy metal density in these SiC-matrix fuel pellets with details described elsewhere. The advanced gas reactor (AGR) program at ORNL used fluidized bed chemical vapor deposition (FBCVD) techniques for TRISO coating of UCO (two phase mixture of UO2 and UCx) kernels. Similar techniques were employed for coating of the UN kernels, however significant changes in processing conditions were required to maintain acceptable coating properties due to physical property and dimensional differences between the UCO and UN kernels.

  3. Natural gas leakage of Mizhi gas reservoir in Ordos Basin, recorded by natural gas fluid inclusion

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Abundant natural gas inclusions were found in calcite veins filled in fractures of Central Fault Belt across the centre of Ordos Basin. Time of the calcite veins and characteristics of natural gas fluid inclusion were investigated by means of dating of thermolum luminescence (TL) and analyzing stable isotope of fluid inclusion. Results show that natural gas inclusion formed at 130―140℃ with salinity of 5.5 wt%―6.0 wt% NaCl. It indicates that natural gas inclusion is a kind of thermal hydrocarbon fluid formed within the basin. Method of opening inclusion by heating was used to analyze composition of fluid inclusion online, of which the maximal hydrocarbon gas content of fluid inclusion contained in veins is 2.4219 m3/t rock and the maximal C1/Σci ratio is 91%. Laser Raman spectroscopy (LRS) was used to analyze chemistry of individual fluid inclusion in which the maximal hydrocarbon gas content is 91.6% compared with little inorganic composition. Isotope analysis results of calcite veins show that they were deposited in fresh water, in which the δ13CPDB of calcite veins is from -5.75‰ to 15.23‰ andδ18OSMOW of calcite veins is from 21.33‰ to 21.67‰. Isotope results show thatδ13C1 PDB of natural gas fluid inclusion is from -21.36‰ to -29.06‰ and δDSMOW of that is from -70.89‰ to -111.03‰. It indicates that the gas of fluid inclusion formed from coal source rocks and it is the same as that of natural gas of Mizhi gas reservoir. Results of TL dating show that time of calcite vein is (32.4±3.42)×104 a, which is thought to be formation time of gas inclusion. It indicated that natural gas inclusion contained in calcite veins recorded natural gas leakage from Mizhi gas reservoir through the Central Fault Belt due to Himalayan tectonic movement.

  4. The use of occupation isoboles for analysis of a response mediated by two receptors: M2 and M3 muscarinic receptor subtype-induced mouse stomach contractions.

    Science.gov (United States)

    Braverman, Alan S; Tallarida, Ronald J; Ruggieri, Michael R

    2008-06-01

    Smooth muscle contains multiple muscarinic receptor subtypes, including M2 and M3. M2 receptors outnumber M3 receptors. Based on the potency of subtype selective anticholinergics, contraction is mediated by the M3 subtype. However, results from knockout (KO) mice show that the M2 receptor mediates approximately 45% of the contractile response produced by the M3 receptor. The traditional theory of one receptor mediating a response does not allow assessment of interactions between receptors when more than one receptor participates in a response. Our study was performed using a novel analysis method based on dual receptor occupancy to determine how M2 and M3 receptor subtypes interact to mediate contraction in mouse stomach. Cumulative carbachol concentration contractile responses were determined for wild-type, M2-KO, and M3-KO stomach body smooth muscle. Using affinity constants for carbachol at M2 and M3 cholinergic receptors, the concentration values were converted to fractional receptor occupation. The resulting occupation-effect relations showed maximum effects for the M2 and M3 subtypes, respectively. These occupation-effect relations allow determination of the additive (expected) isobole based on this dual occupancy, thereby providing a curve (mathematically derived) for comparison against the experimentally derived value in wild type. The actual values determined experimentally in the wild type were not statistically significantly different from that predicted by the isobole. This confirms that the interaction between these mutually occupied receptors is additive. The new method of analysis also expands the traditional Schild theory that was based on a single receptor type to which the agonist and antagonist bind.

  5. 1280m3高炉炉缸侧壁温度异常偏高的护炉实践%Practice BF Hearth of Abnormal Sidewall Temperature In 1280m3BF

    Institute of Scientific and Technical Information of China (English)

    王建明; 陈建平; 曹晓俊; 闫发鳌

    2013-01-01

      本文通过对山西中阳钢铁有限公司1280m?高炉的炉底炉缸温度异常升高进行分析,得出了高炉炉缸炉底温度异常升高的主要原因是由于冷却壁与碳砖之间存在的气隙所致,进而推断出温度升高的原因在于高温煤气的窜动。采用ANSYS有限元分析软件对高炉炉底炉缸的侵蚀状况进行进一步的分析,并得出了高炉炉底炉缸的侵蚀图。%In this paper,we analysis the abnomal increase of 1280m?BF hearth temperature in Shanxi Zhongyang iron﹠steel C.,LTD.It is found that the main cause of abnormal increase about BF hearth and bottom,that is due to gap movement in between cooling wal and carbon bricke ,we infer cause of temperature rising in high temperature come from gas moving .we annalysis BF hearth and bottom by ANSYS,we know the erosion of hearth and bottom in 1280m? BF.

  6. Landfill gas

    Energy Technology Data Exchange (ETDEWEB)

    Willumsen, H. (Crone and Koch, Viborg (Denmark))

    1990-08-01

    In most landfills, the refuse deposit usually has a high content of organic matter consisting of a mixture of household, industrial and garden waste. Immediately after the refuse has been placed in the landfill, aerobic decomposition of the organic waste begins. Once the oxygen has been exhausted, anaerobic decomposition begins. 'Biogas' is produced which has a methane content of approximately 50% and can be used as a fuel. The exploitation of landfill gas for energy purposes was initiated in the USA around 1975 and later in Europe. A landfill gas plant consists of a recovery system and a production system. A recovery system can consist of vertical perforated pipe wells, horizontal perforated pipes or ditches, or membrane covers to collect the generated gas. Under normal conditions it will not be necessary to process the gas except for the removal of water and other impurities (e.g. solid particles) if the gas is to be used in a boiler or engine. In the USA most often only power is produced, whereas in Europe the waste heat is normally exploited, making the plant function as a combined power and heating plant. It is also possible to upgrade the landfill gas to a methane content of nearly 100, after which it can be distributed with natural gas. There are several such plants in the USA. 8 refs., 6 figs., 6 tabs.

  7. The insect repellent N,N-diethyl-m-toluamide (DEET) induces angiogenesis via allosteric modulation of the M3 muscarinic receptor in endothelial cells.

    Science.gov (United States)

    Legeay, Samuel; Clere, Nicolas; Hilairet, Grégory; Do, Quoc-Tuan; Bernard, Philippe; Quignard, Jean-François; Apaire-Marchais, Véronique; Lapied, Bruno; Faure, Sébastien

    2016-06-27

    The insect repellent N,N-diethyl-m-toluamide (DEET) has been reported to inhibit AChE (acetylcholinesterase) and to possess potential carcinogenic properties with excessive vascularization. In the present paper, we demonstrate that DEET specifically stimulates endothelial cells that promote angiogenesis which increases tumor growth. DEET activates cellular processes that lead to angiogenesis including proliferation, migration and adhesion. This is associated with an enhancement of NO production and VEGF expression in endothelial cells. M3 silencing or the use of a pharmacological M3 inhibitor abrogates all of these effects which reveals that DEET-induced angiogenesis is M3 sensitive. The experiments involving calcium signals in both endothelial and HEK cells overexpressing M3 receptors, as well as binding and docking studies demonstrate that DEET acts as an allosteric modulator of the M3 receptor. In addition, DEET inhibited AChE which increased acetylcholine bioavailability and binding to M3 receptors and also strengthened proangiogenic effects by an allosteric modulation.

  8. A strain gauge

    DEFF Research Database (Denmark)

    2016-01-01

    The invention relates to a strain gauge of a carrier layer and a meandering measurement grid positioned on the carrier layer, wherein the strain gauge comprises two reinforcement members positioned on the carrier layer at opposite ends of the measurement grid in the axial direction....... The reinforcement members are each placed within a certain axial distance to the measurement grid with the axial distance being equal to or smaller than a factor times the grid spacing. The invention further relates to a multi-axial strain gauge such as a bi-axial strain gauge or a strain gauge rosette where each...... of the strain gauges comprises reinforcement members. The invention further relates to a method for manufacturing a strain gauge as mentioned above....

  9. Gas turbines

    Energy Technology Data Exchange (ETDEWEB)

    Farahan, E.; Eudaly, J.P.

    1978-10-01

    This evaluation provides performance and cost data for commercially available simple- and regenerative-cycle gas turbines. Intercooled, reheat, and compound cycles are discussed from theoretical basis only, because actual units are not currently available, except on a special-order basis. Performance characteristics investigated include unit efficiency at full-load and off-design conditions, and at rated capacity. Costs are tabulated for both simple- and regenerative-cycle gas turbines. The output capacity of the gas turbines investigated ranges from 80 to 134,000 hp for simple units and from 12,000 to 50,000 hp for regenerative units.

  10. Gas hydrates

    Digital Repository Service at National Institute of Oceanography (India)

    Ramprasad, T.

    and the role it plays in the global climate and the future of fuels. Russia, Japan, Nigeria, Peru, Chile, Pakistan, Indonesia, Korea, etc are various countries who are perusing the gas hydrates studies as a future resource for fuel. Indian Initiative..., 1993, Free gas at the base of the gas hydrate zone in the vicinity of the Chile Triple junction: Geology, v. 21, pp. 905-908. Borowski, W.S., C.K. Paull, and U. William, III, 1999, Global and local variations of interstitial sulfate gradients...

  11. The study of the influence of temperature and initial glucose concentration on the fermentation process in the presence of Saccharomyces cerevisiae yeast strain immobilized on starch gels by reversed-flow gas chromatography.

    Science.gov (United States)

    Lainioti, G Ch; Kapolos, J; Koliadima, A; Karaiskakis, G

    2012-01-01

    The technique of reversed-flow gas chromatography (RFGC) was employed for the determination of the alcoholic fermentation phases and of kinetic parameters for free and immobilized cell systems, at different initial glucose concentrations and temperature values. In addition to this, due to its considerable advantages over other techniques, RFGC was used for the characterization of a new biocatalyst, yeast cells immobilized on starch gel, and especially wheat starch gel. Immobilization of wine yeast Saccharomyces cerevisiae AXAZ-1 was accomplished on wheat and corn starch gels in order to prepare new biocatalysts with great interest for the fermentation industry. The RFGC led with great accuracy, resulting from a literature review, to the determination of reaction rate constants and activation energies at each phase of the fermentation processes. A maximum value of rate constants was observed at initial glucose concentration of 205 g/L, where a higher number of yeast cells was observed. The increase of glucose concentrations had a negative influence on the growth of AXAZ-1 cells and rate constants were decreased. The decrease of fermentation temperature caused a substantial reduction in the viability of immobilized cells as well as in rate constant values. Activation energies of corn starch gel presented lower values than those of wheat starch gel. However, the two supports showed higher catalytic efficiency than free cell systems, proving that starch gels may act as a promoter of the catalytic activity of the yeast cells involved in the fermentation process.

  12. Gas gangrene

    Science.gov (United States)

    ... also can be caused by group A streptococcus, Staphylococcus aureus, and Vibrio vulnificus . Clostridium is found nearly everywhere. As the bacteria grow inside the body, it makes gas and harmful substances (toxins) that can damage body tissues, cells, and blood ...

  13. Tritium Separation from High Volume Dilute Aqueous Streams- Milestone Report for M3FT-15OR0302092

    Energy Technology Data Exchange (ETDEWEB)

    Bhave, Ramesh R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Spencer, Barry B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Nair, S. [Georgia Inst. of Technology, Atlanta, GA (United States)

    2016-02-29

    This report describes the synthesis and evaluation of molecular sieve zeolite membranes to separate and concentrate tritiated water (HTO) from dilute HTO-bearing aqueous streams. Several silico alumino phosphate (SAPO-34) molecular sieve zeolite membranes were synthesized and characterized with gas and vapor permeation measurements. The pervaporation process performance was evaluated for the separation and concentration of tritiated water. Experiments were performed over a range of tritiated water concentration covering the range of concentration anticipated in nuclear fuel processing where potentially both acid and water streams are recycled. The permeate was recovered under vacuum. The tritium concentration ranged from 0.5 to 1 mCi/mL which is about 0.1 mg/L or 0.1 ppm. The HTO concentration was three orders of magnitude lower than experiments performed with simulated feed containing HDO (>100 ppm) using deuterated water where high separation factors (>10) were obtained using SAPO membranes. Separation factor calculated from the measured tritium concentrations ranged from 0.83-0.98. Although the membrane performance characterization results were lower than expected, they can be explained on the basis of low feed volume and three orders of magnitude lower HTO concentration compared to HDO concentration in deuterated water. We have identified several new approaches, such as tuning the diffusion coefficient of HTO, that may help achieve preferential transport of tritium (HTO) resulting in a substantially more concentrated permeate.

  14. The M3 phosphorylation site is required for trafficking and biological roles of PIN-FORMED1, 2, and 7 in Arabidopsis

    Directory of Open Access Journals (Sweden)

    Daeeun Ki

    2016-09-01

    Full Text Available Asymmetrically localized PIN-FORMED (PIN auxin efflux carriers play key roles in regulating directional intercellular auxin movement, generating local auxin gradients, and diverse auxin-mediated growth and development. The polar localization of PINs is controlled by phosphorylation in the central hydrophilic loop (HL of PINs. Although the M3 phosphorylation site, including phosphorylatable 5 Ser/Thr residues, is conserved among long HL-PINs, its native role has only been characterized in PIN3. In this study, we examined the role of M3 phosphorylation site of PIN1, PIN2, and PIN7 in intracellular trafficking, phosphorylation, and biological functions of those PINs in their native expressing tissues. Phosphorylation-defective mutations of the phosphorylatable residues in the M3 site of PIN1-HL led to alteration in subcellular polarity of PIN1 and caused defects in PIN1-mediated biological functions such as cotyledon development, phyllotaxy of vegetative leaves, and development of reproductive organs. The M3 mutations of PIN7 interfered with its polar recycling in the root columella cell in response to gravity stimulus and partially disrupted root gravitropism. On the other hand, the M3 site of PIN2 was shown to be necessary for its targeting to the plasma membrane. In vitro phosphorylation assay showed that the M3 phosphorylation residues of PIN1 are the partial targets by PINOID kinase. Our data suggest that the M3 phosphorylation site is functionally conserved among long HL-PINs by playing roles for their subcellular trafficking and auxin-mediated developmental processes.

  15. The M3 Phosphorylation Site Is Required for Trafficking and Biological Roles of PIN-FORMED1, 2, and 7 in Arabidopsis

    Science.gov (United States)

    Ki, Daeeun; Sasayama, Daisuke; Cho, Hyung-Taeg

    2016-01-01

    Asymmetrically localized PIN-FORMED (PIN) auxin efflux carriers play key roles in regulating directional intercellular auxin movement, generating local auxin gradients, and diverse auxin-mediated growth and development. The polar localization of PINs is controlled by phosphorylation in the central hydrophilic loop (HL) of PINs. Although the M3 phosphorylation site, including phosphorylatable 5 Ser/Thr residues, is conserved among long HL-PINs, its native role has only been characterized in PIN3. In this study, we examined the role of M3 phosphorylation site of PIN1, PIN2, and PIN7 in intracellular trafficking, phosphorylation, and biological functions of those PINs in their native expressing tissues. Phosphorylation-defective mutations of the phosphorylatable residues in the M3 site of PIN1-HL led to alteration in subcellular polarity of PIN1 and caused defects in PIN1-mediated biological functions such as cotyledon development, phyllotaxy of vegetative leaves, and development of reproductive organs. The M3 mutations of PIN7 interfered with its polar recycling in the root columella cell in response to gravity stimulus and partially disrupted root gravitropism. On the other hand, the M3 site of PIN2 was shown to be necessary for its targeting to the plasma membrane. In vitro phosphorylation assay showed that the M3 phosphorylation residues of PIN1 are the partial targets by PINOID kinase. Our data suggest that the M3 phosphorylation site is functionally conserved among long HL-PINs by playing roles for their subcellular trafficking and auxin-mediated developmental processes.

  16. Strain y strain rate para dummies

    Directory of Open Access Journals (Sweden)

    Pastor Olaya, MD

    2011-11-01

    Full Text Available Desarrollos recientes en el campo de la ecocardiografía han permitido a los cardiólogos cuantificar de manera objetiva la función miocárdica regional y global con base en los conceptos de deformación (strain y velocidad de deformación (strain rate que pueden calcularse de manera no invasiva tanto en el ventrículo izquierdo como en el derecho, y suministrar valiosa información en múltiples escenarios clínicos. Dado que esta técnica novedosa y promisoria se utiliza cada vez más en la clínica y en estudios de investigación, se hace necesario el conocimiento adecuado de sus principios, así como de sus aspectos técnicos, alcances y limitaciones para una mejor implementación. En este artículo se busca dar explicación a los conceptos fundamentales y las potenciales aplicaciones clínicas de la strain y la strain rate derivados por speckle tracking (strain 2D.

  17. Three dimensional strained semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Voss, Lars; Conway, Adam; Nikolic, Rebecca J.; Leao, Cedric Rocha; Shao, Qinghui

    2016-11-08

    In one embodiment, an apparatus includes a three dimensional structure comprising a semiconductor material, and at least one thin film in contact with at least one exterior surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the three dimensional structure. In another embodiment, a method includes forming a three dimensional structure comprising a semiconductor material, and depositing at least one thin film on at least one surface of the three dimensional structure for inducing a strain in the structure, the thin film being characterized as providing at least one of: an induced strain of at least 0.05%, and an induced strain in at least 5% of a volume of the structure.

  18. Quantitation of the Contractile Response Mediated by Two Receptors: M2 and M3 Muscarinic Receptor-Mediated Contractions of Human Gastroesophageal Smooth MuscleS⃞

    Science.gov (United States)

    Braverman, Alan S.; Miller, Larry S.; Vegesna, Anil K.; Tiwana, Mansoor I.; Tallarida, Ronald J.; Ruggieri, Michael R.

    2009-01-01

    Although muscarinic receptors are known to mediate tonic contraction of human gastrointestinal tract smooth muscle, the receptor subtypes that mediate the tonic contractions are not entirely clear. Whole human stomachs with attached esophagus were procured from organ transplant donors. Cholinergic contractile responses of clasp, sling, lower esophageal circular (LEC), midesophageal circular (MEC), and midesophageal longitudinal (MEL) muscle strips were determined. Sling fibers contracted greater than the other fibers. Total, M2 and M3 muscarinic receptor density was determined for each of these dissections by immunoprecipitation. M2 receptor density is greatest in the sling fibers, followed by clasp, LEC, MEC, and then MEL, whereas M3 density is greatest in LEC, followed by MEL, MEC, sling, and then clasp. The potency of subtype-selective antagonists to inhibit bethanechol-induced contraction was calculated by Schild analysis to determine which muscarinic receptor subtypes contribute to contraction. The results suggest both M2 and M3 receptors mediate contraction in clasp and sling fibers. Thus, this type of analysis in which multiple receptors mediate the contractile response is inappropriate, and an analysis method relating dual occupation of M2 and M3 receptors to contraction is presented. Using this new method of analysis, it was found that the M2 muscarinic receptor plays a greater role in mediating contraction of clasp and sling fibers than in LEC, MEC, and MEL muscles in which the M3 receptor predominantly mediates contraction. PMID:19126780

  19. Quantitation of the contractile response mediated by two receptors: M2 and M3 muscarinic receptor-mediated contractions of human gastroesophageal smooth muscle.

    Science.gov (United States)

    Braverman, Alan S; Miller, Larry S; Vegesna, Anil K; Tiwana, Mansoor I; Tallarida, Ronald J; Ruggieri, Michael R

    2009-04-01

    Although muscarinic receptors are known to mediate tonic contraction of human gastrointestinal tract smooth muscle, the receptor subtypes that mediate the tonic contractions are not entirely clear. Whole human stomachs with attached esophagus were procured from organ transplant donors. Cholinergic contractile responses of clasp, sling, lower esophageal circular (LEC), midesophageal circular (MEC), and midesophageal longitudinal (MEL) muscle strips were determined. Sling fibers contracted greater than the other fibers. Total, M(2) and M(3) muscarinic receptor density was determined for each of these dissections by immunoprecipitation. M(2) receptor density is greatest in the sling fibers, followed by clasp, LEC, MEC, and then MEL, whereas M(3) density is greatest in LEC, followed by MEL, MEC, sling, and then clasp. The potency of subtype-selective antagonists to inhibit bethanechol-induced contraction was calculated by Schild analysis to determine which muscarinic receptor subtypes contribute to contraction. The results suggest both M(2) and M(3) receptors mediate contraction in clasp and sling fibers. Thus, this type of analysis in which multiple receptors mediate the contractile response is inappropriate, and an analysis method relating dual occupation of M(2) and M(3) receptors to contraction is presented. Using this new method of analysis, it was found that the M(2) muscarinic receptor plays a greater role in mediating contraction of clasp and sling fibers than in LEC, MEC, and MEL muscles in which the M(3) receptor predominantly mediates contraction.

  20. Microwave irradiation induces neurite outgrowth in PC12m3 cells via the p38 mitogen-activated protein kinase pathway.

    Science.gov (United States)

    Inoue, Shigeki; Motoda, Hirotoshi; Koike, Yoshihisa; Kawamura, Kenji; Hiragami, Fukumi; Kano, Yoshio

    2008-02-13

    The increasing use of mobile phone communication has raised concerns about possible health hazard effects of microwave irradiation. We investigated damage and differentiation caused by microwave irradiation on drug-hypersensitive PC12 cell line (PC12m3). These cells showed enhancement of neurite outgrowth to various stimulants. The frequency of neurite outgrowth induced by 2.45 GHz (200 W) of microwave irradiation was approximately 10-fold greater than that of non-irradiated control cells. Incubation of PC12m3 cells with SB203580, a specific inhibitor of p38 MAPK, resulted in marked inhibition of the microwave radiation-induced neurite outgrowth. Also, activation of the transcription factor CREB induced by microwave irradiation was inhibited by SB203580. Heat shock treatment at 45 degrees C had a strong toxic effect on PC12m3 cells, whereas microwave treatment had no toxic effect on PC12m3 cells. These findings indicate that p38 MAPK is responsible for the survival of PC12m3 cells and might induce neurite outgrowth via a CREB signaling pathway when subjected to microwave irradiation.

  1. Virtual Screening of M3 Protein Antagonists for Finding a Model to Study the Gammaherpesvirus Damaged Immune System and Chemokine Related Diseases

    Directory of Open Access Journals (Sweden)

    Ibrahim Torktaz

    2013-12-01

    Full Text Available Introduction: M3 protein is a chemokine decoy receptor involved in pathogenesis of persistent infection with gammaherpesvirus and complications related to the latency of this pathogen. We proposed that antagonists of the M3 would provide a unique opportunity for studying new therapeutic strategies in disordered immune system, immune-deficient states and role of chemokines in pathogenesis development. Methods: Comparative modeling and fold recognition algorithms have been used for prediction of M3 protein 3-D model. Evaluation of the models using Q-mean and ProSA-web score, has led to choosing predicted model by fold recognition algorithm as the best model which was minimized regarding energy level using Molegro Virtual Docker 2011.4.3.0 (MVD software. Pockets and active sites of model were recognized using MVD cavity detection, and MetaPocket algorithms. Ten thousand compounds accessible on KEGG database were screened; MVD was used for computer simulated docking study; MolDock SE was selected as docking scoring function and final results were evaluated based on MolDock and Re-rank score. Results: Docking data suggested that prilocaine, which is generally applied as a topical anesthetic, binds strongly to 3-D model of M3 protein. Conclusion: This study proposes that prilocaine is a potential inhibitor of M3 protein and possibly has immune enhancing properties.

  2. Strain-engineered MOSFETs

    CERN Document Server

    Maiti, CK

    2012-01-01

    Currently strain engineering is the main technique used to enhance the performance of advanced silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Written from an engineering application standpoint, Strain-Engineered MOSFETs introduces promising strain techniques to fabricate strain-engineered MOSFETs and to methods to assess the applications of these techniques. The book provides the background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOSFETs at nanoscale. This book focuses on recent developments in st

  3. An experimental approach aiming the production of a gas mixture composed of hydrogen and methane from biomass as natural gas substitute in industrial applications.

    Science.gov (United States)

    Kraussler, Michael; Schindler, Philipp; Hofbauer, Hermann

    2017-03-11

    This work presents an experimental approach aiming the production of a gas mixture composed of H2 and CH4, which should serve as natural gas substitute in industrial applications. Therefore, a lab-scale process chain employing a water gas shift unit, scrubbing units, and a pressure swing adsorption unit was operated with tar-rich product gas extracted from a commercial dual fluidized bed biomass steam gasification plant. A gas mixture with a volumetric fraction of about 80% H2 and 19% CH4 and with minor fractions of CO and CO2 was produced by employing carbon molecular sieve as adsorbent. Moreover, the produced gas mixture had a lower heating value of about 15.5MJ·m(-3) and a lower Wobbe index of about 43.4MJ·m(-3), which is similar to the typical Wobbe index of natural gas.

  4. Annealing Behavior of Nanostructured Aluminum Produced by Cold Rolling to Ultrahigh Strains

    DEFF Research Database (Denmark)

    Cao, W.Q.; Godfrey, A.; Hansen, Niels

    2009-01-01

    200 degrees C to 220 degrees C. This effect is exemplified by samples deformed to the largest strain, where a rapid decrease in the stored energy from approximately 2 MJ/m(3) in the deformed state to less than 0.5 MJ/m(3) is seen, accompanied by a large decrease in the hardness. A new method...... to 420 degrees C. Microstructural and texture measurements were made using data from electron backscatter diffraction (EBSD) investigations, and the change in mechanical strength was followed using hardness measurements. A large effect of the rolling strain is observed on recovery at temperatures below...

  5. Comparison of Transport Calculation Between 2D/1D synthesis and RAPTOR-M3G at Core Barrel of Korea Standard Nuclear Plant(KSNP), OPR-1000

    Energy Technology Data Exchange (ETDEWEB)

    Maeng, Young Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou [Korea Reactor Integrity Surveillance Technology, Daejeon (Korea, Republic of); Yoo, Chun Sung [Korea Atomic Energy Research Institutes, Daejeon (Korea, Republic of)

    2013-10-15

    The DORT code for 2D/1D synthesis has been actively applied to calculate the fast neutron (E>1.0MeV) fluence exposure of RPV. RAPTOR-M3G code is also applied for the comparison of 2D/1D synthesis, and it was found that 2D/1D synthesis method generally provided more conservative results than RAPTOR-M3G at both RPV and surveillance capsule locations. As a result, definitely RAPTOR-M3G for 3D calculation must apply for accurate evaluation of the integrity and ageing of RPV and internal structures. Therefore, the purpose of this paper is to compare the differences in terms of geometric aspect of KSNP model between 2D/1D synthesis and RAPTOR-M3G at core barrel area. 2D/1D synthesis method shows still higher results at the shortest distance of bypass water region. The reason is that 2D/1D synthesis method has excessive conservatism because of having just one model of R-θ and R-Z separately. Angles (5, 25, 45, 65 and 90 degrees) that RAPTOR-M3G results are higher than 2D/1D synthesis results seem to have almost regular interval. The reason can be that neutron flux to reach to barrel is affected by the nearest core definitely and all of near core areas including bypass water. RAPTOR-M3G performing 3D calculation can be applied to various reactor structures, because the code can simulate the model realistically and reasonably in geometric view points. Understanding the phenomenon that 45 degree shows downward peak, in spite of baffle corner location, remains.

  6. Length and amino acid sequence of peptides substituted for the 5-HT3A receptor M3M4 loop may affect channel expression and desensitization.

    Directory of Open Access Journals (Sweden)

    Nicole K McKinnon

    Full Text Available 5-HT3A receptors are pentameric neurotransmitter-gated ion channels in the Cys-loop receptor family. Each subunit contains an extracellular domain, four transmembrane segments (M1, M2, M3, M4 and a 115 residue intracellular loop between M3 and M4. In contrast, the M3M4 loop in prokaryotic homologues is <15 residues. To investigate the limits of M3M4 loop length and composition on channel function we replaced the 5-HT3A M3M4 loop with two to seven alanine residues (5-HT3A-A(n = 2-7. Mutants were expressed in Xenopus laevis oocytes and characterized using two electrode voltage clamp recording. All mutants were functional. The 5-HT EC(50's were at most 5-fold greater than wild-type (WT. The desensitization rate differed significantly among the mutants. Desensitization rates for 5-HT3A-A(2, 5-HT3A-A(4, 5-HT3A-A(6, and 5-HT3A-A(7 were similar to WT. In contrast, 5-HT3A-A(3 and 5-HT3A-A(5 had desensitization rates at least an order of magnitude faster than WT. The one Ala loop construct, 5-HT3A-A(1, entered a non-functional state from which it did not recover after the first 5-HT application. These results suggest that the large M3M4 loop of eukaryotic Cys-loop channels is not required for receptor assembly or function. However, loop length and amino acid composition can effect channel expression and desensitization. We infer that the cytoplasmic ends of the M3 and M4 segments may undergo conformational changes during channel gating and desensitization and/or the loop may influence the position and mobility of these segments as they undergo gating-induced conformational changes. Altering structure or conformational mobility of the cytoplasmic ends of M3 and M4 may be the basis by which phosphorylation or protein binding to the cytoplasmic loop alters channel function.

  7. Binding properties of nine 4-diphenyl-acetoxy-N-methyl-piperidine (4-DAMP) analogues to M1, M2, M3 and putative M4 muscarinic receptor subtypes.

    OpenAIRE

    Waelbroeck, M.; Camus, J.; Tastenoy, M.; Christophe, J.

    1992-01-01

    1. We compared the binding properties of 4-diphenyl-acetoxy-N-methyl-piperidine methiodide (4-DAMP) and nine analogues of this compound on muscarinic receptors of human neuroblastoma NB-OK1 cells (M1 subtype), rat heart (M2 subtype), rat pancreas (M3 subtype) and to the putative M4 subtype in striatum. 2. The requirements for high affinity binding were somewhat different for the four receptor subtypes. In general, the requirements of M3 receptors were more stringent than for M1, M2 or putativ...

  8. China's Research on Non-conventional Energy Resources- Gas Hydrate

    Institute of Scientific and Technical Information of China (English)

    Pu Ming; Ma Jianguo

    2002-01-01

    @@ Methane exists in ice-like formations called gas hydrate. Hydrate traps methane molecules inside a cage of frozen water. The magnitude of this previously unknown global storehouse of methane is truly staggering and has raised serious inquiry into the possibility of using methane hydrate as a substitute source of energy for oil and conventional natural gas. According to the estimation by PGC, gas hydrate deposits amount to 7.6 × 1018m3 and contain more than twice as much organic carbon as all the world's coal, oil and non-hydrate natural gas combined.

  9. Sprains and Strains

    Science.gov (United States)

    ... and chronic. An acute strain occurs when a muscle becomes strained or pulled — or may even tear — when it stretches unusually far or abruptly. Acute ... and increases joint range of motion, making the muscles less tight and less prone to trauma ... Environmental conditions. Slippery or uneven surfaces can make ...

  10. Highly Strained Organophosphorus Compounds

    NARCIS (Netherlands)

    Slootweg, J.C.

    2005-01-01

    In our research on small, strained organophosphorus ring systems we became interested in the synthesis and applications of species that are even more strained than the parent phosphirane, by introducing an exocyclic double bond (methylenephosphirane), and by cyclopropyl spirofusion to the edge (e.g

  11. Research on forced gas draining from coal seams by surface well drilling

    Institute of Scientific and Technical Information of China (English)

    Wu Dongmei; Wang Haifeng; Ge Chungui; An Fenghua

    2011-01-01

    Surface drilling was performed at the Luling Coal Mine, in Huaibei, to shorten the period required for gas draining. The experimental study was designed to reduce the cost of gas control by efficiently draining gas from the upper protected layer. The structural arraignment and technical principles of pressure relief via surface drilling are discussed. Results from the trial showed that gas drained from the surface system over a period of 10 months. The total amount of collected gas was 248.4 million m3. The gas draining occurred in three stages: a growth period; a period of maximum gas production; and an attenuation period. The period of maximum gas production lasted for 4 months. During this time the methane concentration ranged from 60% to 90% and the average draining rate was 10.6 m3/min. Combined with other methods of draining it was possible to drain 70.6% of the gas from middle coal seam groups. The amount of residual gas dropped to 5.2 m3/ton, and the pressure of the residual gas fell to 0.53 MPa,thereby eliminating the outburst danger in the middle coal seam groups. The factors affecting pressure relief gas draining by surface drilling were analysed.

  12. Characteristics of carbonate gas pool and multistage gas pool formation history of Hetianhe gas field, Tarim Basin, Northwest China

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Hetianhe is a big carbonate gas field which is found and demonstrated in the period of "Chinese National Ninth 5-Year Plan". The proved reserve of Hetianhe gas field is over 600×108 m3. Its main producing layers are Carboniferous bioclastic limestone and Ordovician carbonate composed of buried hill. The former is stratified gas pool with water around its side, and the latter is massive gas pool with water in its bottom. The gases in the gas pools belong to dry gases with normal temperature and pressure systems. Based on the correlation of gas and source rock, the gases are mainly generated from Cambrian source rocks. According to the researches on source rock and structure evolution, and the observations on the thin section to reservoir bitumen and the studies on homogenization temperature of fluid inclusions, the gas pool has been identified and divided into three formation periods. The first is Late Caledonian when the oil generated from the Cambrian source rocks and migrated along faults, as a form of liquid facies into Ordovician carbonate reservoir and accumulated there. After that, the crust uplifted, the oil reservoir had been destroyed. The second is Late Hercynian when condensate gases generated from the Cambrian source rocks and migrated into Ordovician reservoir, as a form of liquid facies. Since the fractures had reached P strata, so the trap might have a real poor preservation condition, and the large-scale gas pool formation had not happened. The third gas reservoir formation period occurred in Himalaya. The fractures on both sides of Hetianhe gas field developed violently under the forces of compression, and thus the present fault horst formed. The dry gases generated from Cambrian source rocks and migrated upwards as the form of gas facies into Ordovician and Carboniferous reservoirs, and the large gas pool as discovered at present was formed finally.

  13. Strain y strain rate para dummies Strain and strain rate for dummies

    Directory of Open Access Journals (Sweden)

    Pastor Olaya

    2011-12-01

    Full Text Available Desarrollos recientes en el campo de la ecocardiografía han permitido a los cardiólogos cuantificar de manera objetiva la función miocárdica regional y global con base en los conceptos de deformación (strain y velocidad de deformación (strain rate que pueden calcularse de manera no invasiva tanto en el ventrículo izquierdo como en el derecho, y suministrar valiosa información en múltiples escenarios clínicos. Dado que esta técnica novedosa y promisoria se utiliza cada vez más en la clínica y en estudios de investigación, se hace necesario el conocimiento adecuado de sus principios, así como de sus aspectos técnicos, alcances y limitaciones para una mejor implementación. En este artículo se busca dar explicación a los conceptos fundamentales y las potenciales aplicaciones clínicas de la strain y la strain rate derivados por speckle tracking (strain 2D.Recent developments in the field of echocardiography have allowed cardiologists to objectively quantify regional and global myocardial function based on the deformation (strain and strain rate which can be calculated non-invasively in both the left or right ventricle, and provide valuable information in multiple clinical settings. Since this new technique is promising and is being increasingly used in clinical and research studies, the adequate knowledge of its principles and its technical aspects, scope and limitations are necessary for its better implementation. This article seeks to explain fundamental concepts and potential clinical applications of strain and strain rate derived by speckle tracking (2D strain.

  14. Gas sensor

    Science.gov (United States)

    Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

    2014-09-09

    A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

  15. Maternal Malaria and Malnutrition (M3) initiative, a pooled birth cohort of 13 pregnancy studies in Africa and the Western Pacific

    DEFF Research Database (Denmark)

    Unger, Holger W; Cates, Jordan E; Gutman, Julie

    2016-01-01

    PURPOSE: The Maternal Malaria and Malnutrition (M3) initiative has pooled together 13 studies with the hope of improving understanding of malaria-nutrition interactions during pregnancy and to foster collaboration between nutritionists and malariologists. PARTICIPANTS: Data were pooled on 14 635...

  16. Muscarinic acetylcholine receptor M1 and M3 subtypes mediate acetylcholine-induced endothelium-independent vasodilatation in rat mesenteric arteries.

    Science.gov (United States)

    Tangsucharit, Panot; Takatori, Shingo; Zamami, Yoshito; Goda, Mitsuhiro; Pakdeechote, Poungrat; Kawasaki, Hiromu; Takayama, Fusako

    2016-01-01

    The present study investigated pharmacological characterizations of muscarinic acetylcholine receptor (AChR) subtypes involving ACh-induced endothelium-independent vasodilatation in rat mesenteric arteries. Changes in perfusion pressure to periarterial nerve stimulation and ACh were measured before and after the perfusion of Krebs solution containing muscarinic receptor antagonists. Distributions of muscarinic AChR subtypes in mesenteric arteries with an intact endothelium were studied using Western blotting. The expression level of M1 and M3 was significantly greater than that of M2. Endothelium removal significantly decreased expression levels of M2 and M3, but not M1. In perfused mesenteric vascular beds with intact endothelium and active tone, exogenous ACh (1, 10, and 100 nmol) produced concentration-dependent and long-lasting vasodilatations. In endothelium-denuded preparations, relaxation to ACh (1 nmol) disappeared, but ACh at 10 and 100 nmol caused long-lasting vasodilatations, which were markedly blocked by the treatment of pirenzepine (M1 antagonist) or 4-DAMP (M1 and M3 antagonist) plus hexamethonium (nicotinic AChR antagonist), but not methoctramine (M2 and M4 antagonist). These results suggest that muscarinic AChR subtypes, mainly M1, distribute throughout the rat mesenteric arteries, and that activation of M1 and/or M3 which may be located on CGRPergic nerves releases CGRP, causing an endothelium-independent vasodilatation. Copyright © 2015 Japanese Pharmacological Society. Production and hosting by Elsevier B.V. All rights reserved.

  17. Muscarinic acetylcholine receptor M1 and M3 subtypes mediate acetylcholine-induced endothelium-independent vasodilatation in rat mesenteric arteries

    Directory of Open Access Journals (Sweden)

    Panot Tangsucharit

    2016-01-01

    Full Text Available The present study investigated pharmacological characterizations of muscarinic acetylcholine receptor (AChR subtypes involving ACh-induced endothelium-independent vasodilatation in rat mesenteric arteries. Changes in perfusion pressure to periarterial nerve stimulation and ACh were measured before and after the perfusion of Krebs solution containing muscarinic receptor antagonists. Distributions of muscarinic AChR subtypes in mesenteric arteries with an intact endothelium were studied using Western blotting. The expression level of M1 and M3 was significantly greater than that of M2. Endothelium removal significantly decreased expression levels of M2 and M3, but not M1. In perfused mesenteric vascular beds with intact endothelium and active tone, exogenous ACh (1, 10, and 100 nmol produced concentration-dependent and long-lasting vasodilatations. In endothelium-denuded preparations, relaxation to ACh (1 nmol disappeared, but ACh at 10 and 100 nmol caused long-lasting vasodilatations, which were markedly blocked by the treatment of pirenzepine (M1 antagonist or 4-DAMP (M1 and M3 antagonist plus hexamethonium (nicotinic AChR antagonist, but not methoctramine (M2 and M4 antagonist. These results suggest that muscarinic AChR subtypes, mainly M1, distribute throughout the rat mesenteric arteries, and that activation of M1 and/or M3 which may be located on CGRPergic nerves releases CGRP, causing an endothelium-independent vasodilatation.

  18. Metal-organic Kagome lattices M3(2,3,6,7,10,11-hexaiminotriphenylene)2 (M = Ni and Cu): from semiconducting to metallic by metal substitution.

    Science.gov (United States)

    Chen, Shuang; Dai, Jun; Zeng, Xiao Cheng

    2015-02-28

    Motivated by recent experimental synthesis of a semiconducting metal-organic graphene analogue (J. Am. Chem. Soc., 2014, 136, 8859), i.e., Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 [Ni3(HITP)2], a new Kagome lattice, Cu3(HITP)2, is designed by substituting the coordination of Ni by Cu. Such substitution results in interesting changes in electronic properties of the M3(HITP)2 bulk and two-dimensional (2D) sheets. In Ni3(HITP)2, each Ni atom adopts the dsp(2) hybridization, forming a perfect 2D conjugation, whereas in Cu3(HITP)2, each Cu atom adopts the sp(3) hybridization, resulting in a distorted 2D sheet. The M3(HITP)2 bulks, assembled from M3(HITP)2 sheets via both strong π-π interaction and weak metal-metal interaction, are metallic. However, the 2D Ni3(HITP)2 sheet is a semiconductor with a narrow band gap whereas the 2D Cu3(HITP)2 sheet is a metal. Remarkably, both the 2D M3(HITP)2 Kagome lattices possess Dirac bands in the vicinity of the Fermi level. Additional ab initio molecular dynamics simulations show that both sheets exhibit high thermal stability at elevated temperatures. Our theoretical study offers new insights into tunability of electronic properties for the 2D metal-organic frameworks (MOFs).

  19. Maternal Malaria and Malnutrition (M3) initiative, a pooled birth cohort of 13 pregnancy studies in Africa and the Western Pacific

    DEFF Research Database (Denmark)

    Unger, Holger W; Cates, Jordan E; Gutman, Julie;

    2016-01-01

    PURPOSE: The Maternal Malaria and Malnutrition (M3) initiative has pooled together 13 studies with the hope of improving understanding of malaria-nutrition interactions during pregnancy and to foster collaboration between nutritionists and malariologists. PARTICIPANTS: Data were pooled on 14 635...... and alternative or intensified malaria prevention regimens, and the settings in which these interventions would be most effective....

  20. Comparison of the space radiation environment at Foton M3 satellite altitudes and on aircraft altitudes for minimum of solar activity

    Science.gov (United States)

    Ploc, Ondrej; Dachev, Tsvetan; Spurny, Frantisek; Tomov, Borislav; Dimitrov, Plamen; Matviichuk, Yury; Bankov, Nikolay

    The space radiation environments at Foton M3 and aircraft altitudes were measured by using of practically equal silicon detector based on a deposited energy spectrometers in the fall of 2007. The aircraft measurements were performed on commercial flights of CSA airlines, while the Foton M3 measurements were inside of the ESA Biopan 6 experiment. Foton M3 orbit was close to circular between 260 and 289 km altitude and about 63° inclination. The relatively high inclination and small shielding of the detector (0.81 g/cm2 ) allow us to observe doses by electrons in the outer radiation belt as high as 2.3 mGy/hour. The comparison of the total GCR deposited doses for the Foton M3 time interval, which coincides with the absolute cycle 23 minimum of the solar activity is about 15% higher than the measured during the Foton M2 satellite doses in 2005. Comparisons of the latitudinal profiles for ISS in 2001, Foton 2 and 3 satellites and aircrafts show that the ratio of doses is as 1:2:3. Aircraft measurements are characterised through average values of exposure during frequent, statistically well based measurements on the routes Prague - New York. Dose absorbed in Si-detector per flight on these routes was about 8% higher in 2007 than in 2005. Different comparisons with the existing models for the radiation environment on aircraft and spacecraft altitudes are presented in the paper also and discussed.

  1. The colon-selective spasmolytic otilonium bromide inhibits muscarinic M3 receptor-coupled calcium signals in isolated human colonic crypts

    Science.gov (United States)

    Lindqvist, Susanne; Hernon, James; Sharp, Paul; Johns, Neil; Addison, Sarah; Watson, Mark; Tighe, Richard; Greer, Shaun; Mackay, Jean; Rhodes, Michael; Lewis, Michael; Stebbings, William; Speakman, Chris; Evangelista, Stefano; Johnson, Ian; Williams, Mark

    2002-01-01

    Otilonium bromide (OB) is a smooth muscle relaxant used in the treatment of irritable bowel syndrome. Otilonium bromide has been shown to interfere with the mobilization of calcium in intestinal smooth muscle, but the effects on other intestinal tissues have not been investigated. We identified the muscarinic receptor subtype coupled to calcium signals in colonic crypt derived from the human colonic epithelium and evaluated the inhibitory effects of OB. Calcium signals were monitored by fluorescence imaging of isolated human colonic crypts and Chinese hamster ovary cells stably expressing the cloned human muscarinic M3 receptor subtype (CHO-M3). Colonic crypt receptor expression was investigated by pharmacological and immunohistochemical techniques. The secretagogue acetylcholine (ACh) stimulated calcium mobilization from intracellular calcium stores at the base of human colonic crypts with an EC50 of 14 μM. The muscarinic receptor antagonists 4-DAMP, AF-DX 384, pirenzepine and methroctamine inhibited the ACh-induced calcium signal with the following respective IC50 (pKb) values: 0.78 nM (9.1), 69 nM (7.2), 128 nM (7.1), and 2510 nM (5.8). Immunohistochemical analyses of muscarinic receptor expression demonstrated the presence of M3 receptor subtype expression at the crypt-base. Otilonium bromide inhibited the generation of ACh-induced calcium signals in a dose dependent manner (IC50=880 nM). In CHO-M3 cells, OB inhibited calcium signals induced by ACh, but not ATP. In addition, OB did not inhibit histamine-induced colonic crypt calcium signals. The present studies have demonstrated that OB inhibited M3 receptor-coupled calcium signals in human colonic crypts and CHO-M3 cells, but not those induced by stimulation of other endogenous receptor types. We propose that the M3 receptor-coupled calcium signalling pathway is directly targeted by OB at the level of the colonic epithelium, suggestive of an anti-secretory action in IBS patients suffering with diarrhoea. PMID

  2. The colon-selective spasmolytic otilonium bromide inhibits muscarinic M(3) receptor-coupled calcium signals in isolated human colonic crypts.

    Science.gov (United States)

    Lindqvist, Susanne; Hernon, James; Sharp, Paul; Johns, Neil; Addison, Sarah; Watson, Mark; Tighe, Richard; Greer, Shaun; Mackay, Jean; Rhodes, Michael; Lewis, Michael; Stebbings, William; Speakman, Chris; Evangelista, Stefano; Johnson, Ian; Williams, Mark

    2002-12-01

    1. Otilonium bromide (OB) is a smooth muscle relaxant used in the treatment of irritable bowel syndrome. Otilonium bromide has been shown to interfere with the mobilization of calcium in intestinal smooth muscle, but the effects on other intestinal tissues have not been investigated. We identified the muscarinic receptor subtype coupled to calcium signals in colonic crypt derived from the human colonic epithelium and evaluated the inhibitory effects of OB. 2. Calcium signals were monitored by fluorescence imaging of isolated human colonic crypts and Chinese hamster ovary cells stably expressing the cloned human muscarinic M(3) receptor subtype (CHO-M(3)). Colonic crypt receptor expression was investigated by pharmacological and immunohistochemical techniques. 3. The secretagogue acetylcholine (ACh) stimulated calcium mobilization from intracellular calcium stores at the base of human colonic crypts with an EC(50) of 14 micro M. The muscarinic receptor antagonists 4-DAMP, AF-DX 384, pirenzepine and methroctamine inhibited the ACh-induced calcium signal with the following respective IC(50) (pK(b)) values: 0.78 nM (9.1), 69 nM (7.2), 128 nM (7.1), and 2510 nM (5.8). 4. Immunohistochemical analyses of muscarinic receptor expression demonstrated the presence of M(3) receptor subtype expression at the crypt-base. 5. Otilonium bromide inhibited the generation of ACh-induced calcium signals in a dose dependent manner (IC(50)=880 nM). 6. In CHO-M(3) cells, OB inhibited calcium signals induced by ACh, but not ATP. In addition, OB did not inhibit histamine-induced colonic crypt calcium signals. 7. The present studies have demonstrated that OB inhibited M(3) receptor-coupled calcium signals in human colonic crypts and CHO-M(3) cells, but not those induced by stimulation of other endogenous receptor types. We propose that the M(3) receptor-coupled calcium signalling pathway is directly targeted by OB at the level of the colonic epithelium, suggestive of an anti-secretory action

  3. Influence factors of thermal stress in the construction period of the concrete outer tank for 160 000 m3 LNG storage%160000 m3大型LNG储罐混凝土外罐施工全过程温度作用分析

    Institute of Scientific and Technical Information of China (English)

    翟希梅; 王恒

    2016-01-01

    To investigate the cracking resistance and avoid the vertical and local circumferential cracks at the bottom of the concrete outer tank during the construction period due to hydration heat, concrete shrinkage and temperature changes for 160 000 m3 liquefied natural gas ( LNG ) tanks, using the finite element numerical simulation technology, the influence of shuttering material, construction quality, construction season and pouring temperature on cracks was figured out with an incremental method. The results show that concrete shrinkage leads to a sustaind growth of concrete tensile stress, the thermal stress fluctuates according to the changing of construction temperature and construction quality and construction season have a strong inference on cracks. Based on this basis, the thermal tress is dismantled according to the effect of each influencing factor, and the whole thermal stress is the superposition of the thermal stress under single influence of hydration heat, concrete shrinkage, construction season and pouring temperature. Some suggestions on anti⁃cracking measures are proposed, mainly by regulating the construction season, complementally by improving the quality of construction.%为了解160000 m3大型液化天然气( LNG)储罐混凝土外罐在施工期间的抗裂性能,避免由于水泥水化放热、混凝土收缩、外界气温变化而造成的外罐墙壁竖向开裂及扶壁柱局部环向裂缝现象,运用有限元数值模拟技术,采用增量法,分别探讨了施工模板材料、施工质量、施工季节及混凝土入模温度对混凝土外罐温度应力分布的影响及其规律。结果显示:模板对温度应力的影响作用较小,混凝土收缩导致混凝土拉应力持续增长,温度应力随着施工季节温度的变化而产生相应波动,施工质量及施工季节对温度应力的影响较大;在上述结论基础上,视温度应力结果为水化热、混凝土收缩、外界

  4. Involvement of M3 Cholinergic Receptor Signal Transduction Pathway in Regulation of the Expression of Chemokine MOB-1, MCP-1 Genes in Pancreatic Acinar Cells

    Institute of Scientific and Technical Information of China (English)

    郑海; 陈道达; 张景輝; 田原

    2004-01-01

    Whether M3 cholinergic receptor signal transduction pathway is involved in regulation of the activation of NF-κB and the expression of chemokine MOB-1, MCP-1genes in pancreatic acinar cells was investigated. Rat pancreatic acinar cells were isolated, cultured and treated with carbachol, atropine and PDTC in vitro. The MOB-1 and MCP-1 mRNA expression was detected by using RT-PCR. The activation of NF-κB was monitored by using electrophoretic mobility shift assay.The results showed that as compared with control group, M3 cholinergic receptor agonist (103mol/L, 104-4ol/L carbachol) could induce a concentration-dependent and time-dependent increase in the expression of MOB-1, MCP-1 mRNA in pancreatic acinar cells. After treatment with 10 -3mol/L carbachol for 2 h, the expression of MOB-1, MCP-1 mRNA was strongest. The activity of NF-κB in pancreatic acinar cells was significantly increased (P<0.01) after treated with M3 cholinergic receptor agonist (10-3 mol/L carbachol) in vitro for 30 min. Either M3 cholinergic receptor antagonist (10-5 mol/L atropine) or NF-κB inhibitor (10-2 mol/L PDTC) could obviously inhibit the activation of NF-κB and the chemokine MOB-1, MCP-1 mRNA expression induced by carbachol (P <0.05). This inhibitory effect was significantly increased by atropine plus PDTC (P<0.01). The results of these studies indicated that M3 cholinergic receptor signal transduction pathway was likely involved in regulation of the expression of chemokine MOB-1 and MCP-1genes in pancreatic acinar cells in vitro through the activation of NF-κB.

  5. Determination of indices and critical values of gas parameters of the first gas outburst in a coal seam of the Xieqiao Mine

    Institute of Scientific and Technical Information of China (English)

    Ou Jianchun; Liu Mingju; Zhang Chunru; Liu Yanwei; Wei Jianping

    2012-01-01

    Based on the important role in mine safety played by parameters of the first gas outburst,we propose a method of combining historic data,theoretical analysis and experimental research for the purpose of critical values of gas parameters of the first gas outburst in a coal seam of the Xieqiao Mine.According to a characteristic analysis and a summary of the rules ofcoal and gas outbursts in the No.8 coal seam ofa Huainan mine,we have investigated their effect on coal and gas outbursts in terms such as ground stress,gas,and coal structure.We have selected gas parameters and determined the critical values of each of the following indices:gas content as 7.7 m3/t,tectonic coal as 0.8 m thick,the absolute gas emission as 2 m3/min,the rate of change as 0.7 m3/min,the gas desorption index of a drilling chip K1 as 0.26 ml/(g min1/2) and the values of desorption indexes △h2 as 200 Pa.From a verification of the production,the results indicate that application of each index and their critical values significantly improve the level of safety in the production process,relieve the burden upon the mine,save much labor and bring clear economic benefits.

  6. Natural Gas Transport

    OpenAIRE

    Tomás Correa; Nelson Osorio

    2009-01-01

    This paper reviews the present and future on natural gas transportation options, from oil and gas fields to markets, including liquefied natural gas, gas pipeline, compressed natural gas, natural gas hydrates, and gas to liquids and the perspectives of using them in Colombia, since this is the main fuel alternative to supply the world in at least the next 50 years.

  7. Natural Gas Transport

    Directory of Open Access Journals (Sweden)

    Tomás Correa

    2009-06-01

    Full Text Available This paper reviews the present and future on natural gas transportation options, from oil and gas fields to markets, including liquefied natural gas, gas pipeline, compressed natural gas, natural gas hydrates, and gas to liquids and the perspectives of using them in Colombia, since this is the main fuel alternative to supply the world in at least the next 50 years.

  8. Wood gas; Holz gibt Gas

    Energy Technology Data Exchange (ETDEWEB)

    Hilgers, Claudia

    2011-06-17

    Sixty years ago, wood gas was even used as a car fuel. Today, this ancient technology is experiencing a renaissance. Small cogeneration plants with wood gasifiers are ideal for renewable and decentral power supply concepts for tomorrow. Until then, there is much pioneering work to do until plants will be ready for serial production.

  9. Strain mapping on gold thin film buckling and siliconblistering

    Energy Technology Data Exchange (ETDEWEB)

    Goudeau, P.; Tamura, N.; Parry, G.; Colin, J.; Coupeau, C.; Cleymand, F.; Padmore, H.

    2005-09-01

    Stress/Strain fields associated with thin film buckling induced by compressive stresses or blistering due to the presence of gas bubbles underneath single crystal surfaces are difficult to measure owing to the microscale dimensions of these structures. In this work, we show that micro Scanning X-ray diffraction is a well suited technique for mapping the strain/stress tensor of these damaged structures.

  10. Primary Screening of 10 - Hydroxy - 2 - Decenoic Acid Productive Strains

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In this paper, eleven strains, which vere screened strictly from raw royal.jelly, soil and honeycomb etc. by means of dilution plate and spread plate methods, were cultured at 28°C for60 h with shaking. To determine whether they could yield 10-Hydroxy-2-decenoic acid during fermentation, gas chromatography and gas chromatography-mass spectrometry methods were used. The results showed that the strains BH002 and BH004. were both identified as Crvtococcaceae. where BH002 was primarily classified into Candida for possessing the abilities. The 10-HDA productivity of Candida BH002 and that of BH004 were 0.327% and 0.2648% respectively.

  11. Measurement of radon concentration in super-Kamiokande's buffer gas

    Science.gov (United States)

    Nakano, Y.; Sekiya, H.; Tasaka, S.; Takeuchi, Y.; Wendell, R. A.; Matsubara, M.; Nakahata, M.

    2017-09-01

    To precisely measure radon concentrations in purified air supplied to the Super-Kamiokande detector as a buffer gas, we have developed a highly sensitive radon detector with an intrinsic background as low as 0.33 ± 0.07 mBq /m3 . In this article, we discuss the construction and calibration of this detector as well as results of its application to the measurement and monitoring of the buffer gas layer above Super-Kamiokande. In March 2013, the chilled activated charcoal system used to remove radon in the input buffer gas was upgraded. After this improvement, a dramatic reduction in the radon concentration of the supply gas down to 0.08 ± 0.07 mBq /m3 . Additionally, the Rn concentration of the in-situ buffer gas has been measured 28.8 ± 1.7 mBq /m3 using the new radon detector. Based on these measurements we have determined that the dominant source of Rn in the buffer gas arises from contamination from the Super-Kamiokande tank itself.

  12. Volcanic gas

    Science.gov (United States)

    McGee, Kenneth A.; Gerlach, Terrance M.

    1995-01-01

    In Roman mythology, Vulcan, the god of fire, was said to have made tools and weapons for the other gods in his workshop at Olympus. Throughout history, volcanoes have frequently been identified with Vulcan and other mythological figures. Scientists now know that the “smoke" from volcanoes, once attributed by poets to be from Vulcan’s forge, is actually volcanic gas naturally released from both active and many inactive volcanoes. The molten rock, or magma, that lies beneath volcanoes and fuels eruptions, contains abundant gases that are released to the surface before, during, and after eruptions. These gases range from relatively benign low-temperature steam to thick hot clouds of choking sulfurous fume jetting from the earth. Water vapor is typically the most abundant volcanic gas, followed by carbon dioxide and sulfur dioxide. Other volcanic gases are hydrogen sulfide, hydrochloric acid, hydrogen, carbon monoxide, hydrofluoric acid, and other trace gases and volatile metals. The concentrations of these gas species can vary considerably from one volcano to the next.

  13. Hamstring strain - aftercare

    Science.gov (United States)

    ... Elsevier Saunders; 2015:chap 88. Reider B, Davies GJ, Provencher MT. Muscle strains about the hip and thigh. In: Reider B, Davies GJ, Provencher MT, eds. Orthopaedic Rehabilitation of the Athlete . ...

  14. The strained state cosmology

    CERN Document Server

    Tartaglia, Angelo

    2015-01-01

    Starting from some relevant facts concerning the behaviour of the universe over large scale and time span, the analogy between the geometric approach of General Relativ- ity and the classical description of an elastic strained material continuum is discussed. Extending the elastic deformation approach to four dimensions it is shown that the accelerated expansion of the universe is recovered. The strain field of space-time repro- duces properties similar to the ones ascribed to the dark energy currently called in to explain the accelerated expansion. The strain field in the primordial universe behaves as radiation, but asymptotically it reproduces the cosmological constant. Subjecting the theory to a number of cosmological tests confirms the soundness of the approach and gives an optimal value for the one parameter of the model, i.e. the bulk modulus of the space-time continuum. Finally various aspects of the Strained State Cosmology (SSC) are discussed and contrasted with some non-linear massive gravity theor...

  15. Recent development in thermally activated desalination methods: achieving an energy efficiency less than 2.5 kWhelec/m3

    KAUST Repository

    Shahzad, Muhammad Wakil

    2015-05-19

    Water-Energy-Environment nexus is a crucial consideration when designing seawater desalination processes, particularly for the water-stressed countries where the annual water availability is less than 250 m3 per capita. Despite the thermodynamics limit for seawater desalination at normal conditions is about 0.78 to 1.09 kWhelec/m3, the specific energy consumption of desalination of real plants is found to operate at several folds higher. Today’s technological advancement in membranes, namely the reverse osmosis processes, has set an energy consumption of around 3.5–5 kWhelec/m3, while the conventional perception of thermally activated processes such as MSF and MED tends to be higher. Although the higher energetic specific consumption of MED or MSF processes appeared to be higher at 60–100 kWhthermal/m3, their true electricity equivalent has been converted, hitherto, using the energetic analyses where the work potential of working steam of the processes cannot be captured adequately. Thermally activated processes, such as MED and MSF, form the bottoming cycle of a cogeneration plant where both electricity and desalination processes operate in tandem in a cascaded manner. Only the bled-steam at lower exergy is extracted for the desalination processes. In this presentation, we demonstrate that in a cogen plant with 30% bled-steam for MED processes, the exergy destruction ratio is found to be less than 7% of the total available exergy that emanated from the boilers. By the exergetic approach, the equivalent electricity consumption of an average 75 kWhthermal/m3 would result in an electrical equivalent of less than 2.5 kWhelec/m3. Also in this presentation, the authors will elaborate the latest developments in the use of hybridization concept where the MED and the AD cycles are thermodynamically integrated and enhancing the overall efficiency of desalination. © 2015 Balaban Desalination Publications. All rights reserved.

  16. Psychological strain between nurses

    Directory of Open Access Journals (Sweden)

    Andrea Obročníková

    2015-12-01

    Full Text Available Aim: The aim of the study was to identify differences in perception of work (mental workload among nurses providing acute and chronic nursing care. Design: Study design is cross-sectional and descriptive. Methods: The sample of respondents consisted of 97 nurses working in departments Neurology, Anesthesiology and Intensive Care Unit of the hospital St. James in Bardejov, University Hospital of L. Pasteur in Košice and University Hospital J. A. Reiman in Prešov. To measure psychological strain, Meister's questionnaire for neuropsychological strain was used. Results: Increased psychological strain was observed in nurses providing acute care versus nurses providing chronic care, particularly in job satisfaction, long-term tolerance, time constraints, high responsibility, nervousness, fatigue and satiety. In comparison with the population norm, nurses in acute care achieved significantly higher indicators of factor I (strain and gross score as nurses in neurological care. A statistically significant relationship between psychological stress and age of nurses working in anesthesiology and intensive care departments was confirmed. Nurses with long term practical experience are exposed to intense mental stress (especially in the areas of strain and monotony. Conclusion: The results of our study suggest the reality that variable qualities of work related strain among nurses can lead to physical and emotional exhaustion.

  17. Photothermal strain imaging

    Science.gov (United States)

    Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong

    2017-07-01

    Vulnerable plaques are the major cause of cardiovascular disease, but they are difficult to detect with conventional intravascular imaging techniques. Techniques are needed to identify plaque vulnerability based on the presence of lipids in plaque. Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed, which varies with the medium temperature. In TSI, the strain that occurs during tissue temperature change can be used for lipid detection because it has a different tendency depending on the type of tissue. Here, we demonstrate photothermal strain imaging (pTSI) using an intravascular ultrasound catheter. pTSI is performed by slightly and selectively heating lipid using a relatively inexpensive continuous laser source. We applied a speckle-tracking algorithm to US B-mode images for strain calculations. As a result, the strain produced in porcine fat was different from the strain produced in water-bearing gelatin phantom, which made it possible to distinguish the two. This suggests that pTSI could potentially be a way of differentiating lipids in coronary artery.

  18. Strain: Fact or Fiction?

    Science.gov (United States)

    Heilbronner, Renée

    2017-04-01

    2017 marks the 50th anniversary of the publication of John Ramsay's well known textbook "Folding and Fracturing of Rocks" - ... and the 30th anniversary of the rejection of a rather less well known paper entitled "Strain: Fact or Fiction?" submitted by Renée Panozzo to the Journal of Structural Geology. The gist of the paper was simple and straight forward: it was argued that not every fabric that can be observed in deformed rocks is necessarily a measure of the amount of strain the rock incurred. A distinction was made between a general "fabric", i.e., the traceable geometry of grain boundaries, for example, and a so-called "strain fabric", i.e., the model geometry that would result from homogeneously straining an initially isotropic fabric and that would exhibit at least orthorhombic symmetry. To verify if a given fabric was indeed a strain fabric it was therefore suggested to use the SURFOR method (published by Panozzo) and to carry out a so-called strain test, i.e., a check of symmetry, before interpreting the results of a fabric analysis in terms of strain. The problem with the paper was that it was very obviously written out of frustration. The frustration came form having reviewed a number of manuscripts which tried to use the then novel SURFOR method for strain analysis without first checking if the the fabric was a indeed a "strain fabric" or not, and then blaming the SURFOR method for producing ambiguous results. As a result, the paper was not exactly well balanced and carefully thought out. It was considered "interesting but not scholarly" by one of the reviewers and down-right offensive by the second. To tell the truth, however, the paper was not formally rejected. The editor Sue Treagus strongly encouraged Panozzo to revise the paper, ... and 30 years later, I will follow her advise and offer a revised paper as a tribute to John Ramsay. To quote from the original manuscript: "We should be a little more impressed that strain works so well, and less

  19. Sources and physical processes responsible for OH/H2O in the lunar soil as revealed by the Moon Mineralogy Mapper (M3)

    Science.gov (United States)

    McCord, T.B.; Taylor, L.A.; Combe, J.-P.; Kramer, G.; Pieters, C.M.; Sunshine, J.M.; Clark, R.N.

    2011-01-01

    Analysis of two absorption features near 3 m in the lunar reflectance spectrum, observed by the orbiting M3 spectrometer and interpreted as being due to OH and H2O, is presented, and the results are used to discuss the processes producing these molecules. This analysis focuses on the dependence of the absorptions on lunar physical properties, including composition, illumination, latitude, and temperature. Solar wind proton-induced hydroxylation is proposed as the creation process, and its products could be a source for other reported types of hydrogen-rich material and water. The irregular and damaged fine-grained lunar soil seems especially adapted for trapping solar wind protons and forming OH owing to abundant dangling oxygen bonds. The M3 data reveal that the strengths of the two absorptions are correlated and widespread, and both are correlated with lunar composition but in different ways. Feldspathic material seems richer in OH. These results seem to rule out water from the lunar interior and cometary infall as major sources. There appear to be correlations of apparent band strengths with time of day and lighting conditions. However, thermal emission from the Moon reduces the apparent strengths of the M3 absorptions, and its removal is not yet completely successful. Further, many of the lunar physical properties are themselves intercorrelated, and so separating these dependencies on the absorptions is difficult, due to the incomplete M3 data set. This process should also operate on other airless silicate surfaces, such as Mercury and Vesta, which will be visited by the Dawn spacecraft in mid-2011. Copyright 2011 by the American Geophysical Union.

  20. Comparison of Analysis Results Between 2D/1D Synthesis and RAPTOR-M3G in the Korea Standard Nuclear Plant (KSNP)

    Science.gov (United States)

    Joung Lim, Mi; Maeng, Young Jae; Fero, Arnold H.; Anderson, Stanwood L.

    2016-02-01

    The 2D/1D synthesis methodology has been used to calculate the fast neutron (E > 1.0 MeV) exposure to the beltline region of the reactor pressure vessel. This method uses the DORT 3.1 discrete ordinates code and the BUGLE-96 cross-section library based on ENDF/B-VI. RAPTOR-M3G (RApid Parallel Transport Of Radiation-Multiple 3D Geometries) which performs full 3D calculations was developed and is based on domain decomposition algorithms, where the spatial and angular domains are allocated and processed on multi-processor computer architecture. As compared to traditional single-processor applications, this approach reduces the computational load as well as the memory requirement per processor. Both methods are applied to surveillance test results for the Korea Standard Nuclear Plant (KSNP)-OPR (Optimized Power Reactor) 1000 MW. The objective of this paper is to compare the results of the KSNP surveillance program between 2D/1D synthesis and RAPTOR-M3G. Each operating KSNP has a reactor vessel surveillance program consisting of six surveillance capsules located between the core and the reactor vessel in the downcomer region near the reactor vessel wall. In addition to the In-Vessel surveillance program, an Ex-Vessel Neutron Dosimetry (EVND) program has been implemented. In order to estimate surveillance test results, cycle-specific forward transport calculations were performed by 2D/1D synthesis and by RAPTOR-M3G. The ratio between measured and calculated (M/C) reaction rates will be discussed. The current plan is to install an EVND system in all of the Korea PWRs including the new reactor type, APR (Advanced Power Reactor) 1400 MW. This work will play an important role in establishing a KSNP-specific database of surveillance test results and will employ RAPTOR-M3G for surveillance dosimetry location as well as positions in the KSNP reactor vessel.

  1. 肌肉白天使!——G—Power BMW M3(E92)GT2 R

    Institute of Scientific and Technical Information of China (English)

    斌志

    2013-01-01

    G-Power为德国老字号BMW改装商之一,推出了超暴力型的M3(E92)GT2R版本。雪白车漆配搭赛车拉花、20英寸黑色锻造轮毂、GT大尾翼以及全车碳纤宽体处理,横竖看都是暴力!!!

  2. RR Lyrae stars in the outer region of the globular cluster M3: a shortage of long periods at r ~ 3.5 to 6 arcmin ?

    CERN Document Server

    Butler, D J

    2004-01-01

    An analysis of the radial distribution of ab-type RR Lyrae star periods in the outer region of the globular cluster M3 at r >= 0.83 arcmin has been performed. That analysis points towards a real shortage of stars with long periods in the radial distance range 3.5 to 6 arcmin (or about 7 to 12 core radii). A brief discussion is presented. The origin of the phenomenon remains an open question.

  3. Growth Parameter of Wild and Selected Strains of Atlantic Salmon (Salmo salar) on Two Experimental Diets

    Science.gov (United States)

    Atlantic salmon parr from Penobscot (wild) and St. John’s River (selected) strains were cultured in 0.265m3 tanks filled with 2-3 ppt salinity well water and connected to a common bio-filter system. Salmon parr were stocked at 100 fish/tank and fed one of two experimental diets in a 2 x 2 factorial...

  4. Sleep as spatiotemporal integration of biological processes that evolved to periodically reinforce neurodynamic and metabolic homeostasis: The 2m3d paradigm of sleep.

    Science.gov (United States)

    Mader, Edward Claro; Mader, Annie Cielo Llave

    2016-08-15

    Sleep continues to perplex scientists and researchers. Despite decades of sleep research, we still lack a clear understanding of the biological functions and evolution of sleep. In this review, we will examine sleep from a functional and phylogenetic perspective and describe some important conceptual gaps in understanding sleep. Classical theories of the biology and evolution of sleep emphasize sensory activation, energy balance, and metabolic homeostasis. Advances in electrophysiology, functional neuroimaging, and neuroplasticity allow us to view sleep within the framework of neural dynamics. With this paradigm shift, we have come to realize the importance of neurodynamic homeostasis in shaping the biology of sleep. Evidently, animals sleep to achieve neurodynamic and metabolic homeostasis. We are not aware of any framework for understanding sleep where neurodynamic, metabolic, homeostatic, chronophasic, and afferent variables are all taken into account. This motivated us to propose the two-mode three-drive (2m3d) paradigm of sleep. In the 2m3d paradigm, local neurodynamic/metabolic (N/M) processes switch between two modes-m0 and m1-in response to three drives-afferent, chronophasic, and homeostatic. The spatiotemporal integration of local m0/m1 operations gives rise to the global states of sleep and wakefulness. As a framework of evolution, the 2m3d paradigm allows us to view sleep as a robust adaptive strategy that evolved so animals can periodically reinforce neurodynamic and metabolic homeostasis while remaining sensitive to their internal and external environment.

  5. Describing the heavy-ion above-barrier fusion using the bare potentials resulting from Migdal and M3Y double-folding approaches

    Science.gov (United States)

    Gontchar, I. I.; Chushnyakova, M. V.

    2016-08-01

    Systematic calculations of the Coulomb barrier parameters for collisions of spherical nuclei are performed within the framework of the double folding approach. The value of the parameter {B}Z={Z}P{Z}T/({A}P{1/3}+{A}T{1/3}) (which estimates the Coulomb barrier height) varies in these calculations from 10 MeV up to 150 MeV. The nuclear densities came from the Hartree-Fock calculations which reproduce the experimental charge densities with good accuracy. For the nucleon-nucleon effective interaction two analytical approximations known in the literature are used: the M3Y and Migdal forces. The calculations show that Migdal interaction always results in the higher Coulomb barrier. Moreover, as B Z increases the difference between the M3Y and Migdal barrier heights systematically increases as well. As the result, the above barrier fusion cross sections calculated dynamically with the M3Y forces and surface friction are in agreement with the data. The cross sections calculated with the Migdal forces are always below the experimental data even without accounting for the dissipation.

  6. Describing the heavy-ion above-barrier fusion using the bare potentials resulting from Migdal and M3Y double-folding approaches

    CERN Document Server

    Gontchar, Igor

    2015-01-01

    Systematic calculations of the Coulomb barrier parameters for collisions of spherical nuclei are performed within the framework of the double folding approach. The value of the parameter $B_Z=Z_PZ_T/(A^{1/3}_P+(A^{1/3}_P)$ (which estimates the Coulomb barrier height) varies in these calculations from 10 MeV up to 150 MeV. The nuclear densities came from the Hartree-Fock calculations which reproduce the experimental charge densities with good accuracy. For the nucleon-nucleon effective interaction two analytical approximations known in the literature are used: the M3Y and Migdal forces. The calculations show that Migdal interaction always results in the higher Coulomb barrier. Moreover, as $B_Z$ increases the difference between the M3Y and Migdal barrier heights systematically increases as well. As the result, the above barrier fusion cross sections calculated dynamically with the M3Y forces and surface friction are in agreement with the data. The cross sections calculated with the Migdal forces are always bel...

  7. Greenhouse gas emissions from shallow uncovered coal seams

    Institute of Scientific and Technical Information of China (English)

    Saghafi Abouna

    2014-01-01

    This study discusses a method of quantifying emissions from surface coal mining that has been trialled in Australia. The method is based on direct measurement of surface emissions from uncovered coal seams in mine pits, concurrent measurement of residual gas content of blasted coal in mine pits, and measurement of pre-mining gas content of the same seam from cores retrieved from exploration boreholes drilled away from active mining. The results from one of the mines studied are presented in this paper. In this mine, the pre-mining gas content of the target seam was measured using cores from an exploration borehole away from active mining. Gas content varied from 0.7 to 0.8 m3/t and gas composition varied from 16% to 21% CH4 (84-79% CO2). In-pit measurements included seam surface emissions and residual gas content of blasted and ripped coal. Residual gas content varied from 0.09 to 0.15 m3/t, less than twofold across the mine pit. Composition of the residual gas was in general 90%CO2 and 10%CH4, with slight var-iation between samples. Coal seam surface emissions varied from 1.03 to 7.50 mL of CO2-e per minute and per square meter of the coal seam surface, a sevenfold variation across the mine pit.

  8. CONTROL OF GAS EMISSION AT COAL FACE IN CHINA

    Institute of Scientific and Technical Information of China (English)

    俞启香; 付建华

    1991-01-01

    All the underground coal mines in China are gassy mines. The gas emission at coal face increasingly grows with the increase of working depth and coal output,for example,the gas emission at a full mechanized coal face of mine No.2 at Yongquan with a daily output of 2,000t/d is up to 66--72m3/min. Special gas emission phenomena such as gas blowout, gas and coal outburst etc. have occurred at some faces, which threatens the safe production of face, obstructs the growth of productivity and limits the full play of mechanized equipment. In this paper, gas at face is divided, according to its origin, into three constituents, namely, coming from the coal wall, mined coal and goaf; and a formula for calculation is given. Also, the characteristics of the variation of gas emission at coal face, and thesinfluence of mining sequence of a group of seams and supplied air quantity on the gas emission are discussed. Furthermore, based on the regularity of gas emission st coal face from the above three sources, and on the experiences of years, three principles on controlling gas emission at coal face are presented, that are managing the gas on classification basis, harnessing each source separately and comprehensive prevention and control. Finally, technical measures for prevention and treatment of the accumulation of gas in the upper corner of face, at the working place of coal-winning machine and in the bottom trough of conveyor are introduced.

  9. K3M3 METAR

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — METAR is a routine scheduled observation and is the primary observation code used in the United States to satisfy requirements for reporting surface meteorological...

  10. The crystal structure of the streptococcal collagen-like protein 2 globular domain from invasive M3-type group A Streptococcus shows significant similarity to immunomodulatory HIV protein gp41.

    Science.gov (United States)

    Squeglia, Flavia; Bachert, Beth; De Simone, Alfonso; Lukomski, Slawomir; Berisio, Rita

    2014-02-21

    The arsenal of virulence factors deployed by streptococci includes streptococcal collagen-like (Scl) proteins. These proteins, which are characterized by a globular domain and a collagen-like domain, play key roles in host adhesion, host immune defense evasion, and biofilm formation. In this work, we demonstrate that the Scl2.3 protein is expressed on the surface of invasive M3-type strain MGAS315 of Streptococcus pyogenes. We report the crystal structure of Scl2.3 globular domain, the first of any Scl. This structure shows a novel fold among collagen trimerization domains of either bacterial or human origin. Despite there being low sequence identity, we observed that Scl2.3 globular domain structurally resembles the gp41 subunit of the envelope glycoprotein from human immunodeficiency virus type 1, an essential subunit for viral fusion to human T cells. We combined crystallographic data with modeling and molecular dynamics techniques to gather information on the entire lollipop-like Scl2.3 structure. Molecular dynamics data evidence a high flexibility of Scl2.3 with remarkable interdomain motions that are likely instrumental to the protein biological function in mediating adhesive or immune-modulatory functions in host-pathogen interactions. Altogether, our results provide molecular tools for the understanding of Scl-mediated streptococcal pathogenesis and important structural insights for the future design of small molecular inhibitors of streptococcal invasion.

  11. Sweet gas

    Science.gov (United States)

    Showstack, Randy

    When poisonous hydrogen sulfide contaminates a natural gas deposit, the drilling company usually caps the well and moves on to other areas that may contain larger reserves and offer stronger economic incentives. Chemical and biological methods exist to purify these wells, but most are complex and costly. However, a group of scientists now is developing what could be a cheaper, easier method to clean up and utilize this polluted natural gas.The technique—which involves growing “enrichment” cultures of bacteria that metabolize the hydrogen sulfide into harmless compounds—could be particularly useful to poor and energy-starved developing nations, says Norman Wainwright, a senior scientist at the Woods Hole Marine Biological Laboratory. “We're hoping the technique can be robust enough and inexpensive enough to be used in a developing country,” Wainwright says. Other scientists involved with the project are Porter Anderson, a University of Rochester professor emeritus associated with the lab and Ben Ebenhack, also of Rochester.

  12. Survival of Campylobacter jejuni in different gas mixtures

    DEFF Research Database (Denmark)

    Boysen, Louise; Knochel, Susanne; Rosenquist, Hanne

    2007-01-01

    Campylobacter jejuni in fresh chilled chicken meat is known to be a major risk factor for human gastrointestinal disease. In the present study, the survival under chilled conditions of different C. jejuni strains exposed to different gas mixtures usually used for gas packaging of food was examined...

  13. Unconventional shale-gas systems: The Mississippian Barnett Shale of north-central Texas as one model for thermogenic shale-gas assessment

    Science.gov (United States)

    Jarvie, D.M.; Hill, R.J.; Ruble, T.E.; Pollastro, R.M.

    2007-01-01

    Shale-gas resource plays can be distinguished by gas type and system characteristics. The Newark East gas field, located in the Fort Worth Basin, Texas, is defined by thermogenic gas production from low-porosity and low-permeability Barnett Shale. The Barnett Shale gas system, a self-contained source-reservoir system, has generated large amounts of gas in the key productive areas because of various characteristics and processes, including (1) excellent original organic richness and generation potential; (2) primary and secondary cracking of kerogen and retained oil, respectively; (3) retention of oil for cracking to gas by adsorption; (4) porosity resulting from organic matter decomposition; and (5) brittle mineralogical composition. The calculated total gas in place (GIP) based on estimated ultimate recovery that is based on production profiles and operator estimates is about 204 bcf/section (5.78 ?? 109 m3/1.73 ?? 104 m3). We estimate that the Barnett Shale has a total generation potential of about 609 bbl of oil equivalent/ac-ft or the equivalent of 3657 mcf/ac-ft (84.0 m3/m3). Assuming a thickness of 350 ft (107 m) and only sufficient hydrogen for partial cracking of retained oil to gas, a total generation potential of 820 bcf/section is estimated. Of this potential, approximately 60% was expelled, and the balance was retained for secondary cracking of oil to gas, if sufficient thermal maturity was reached. Gas storage capacity of the Barnett Shale at typical reservoir pressure, volume, and temperature conditions and 6% porosity shows a maximum storage capacity of 540 mcf/ac-ft or 159 scf/ton. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

  14. Muscle strain injuries.

    Science.gov (United States)

    Garrett, W E

    1996-01-01

    One of the most common injuries seen in the office of the practicing physician is the muscle strain. Until recently, little data were available on the basic science and clinical application of this basic science for the treatment and prevention of muscle strains. Studies in the last 10 years represent action taken on the direction of investigation into muscle strain injuries from the laboratory and clinical fronts. Findings from the laboratory indicate that certain muscles are susceptible to strain injury (muscles that cross multiple joints or have complex architecture). These muscles have a strain threshold for both passive and active injury. Strain injury is not the result of muscle contraction alone, rather, strains are the result of excessive stretch or stretch while the muscle is being activated. When the muscle tears, the damage is localized very near the muscle-tendon junction. After injury, the muscle is weaker and at risk for further injury. The force output of the muscle returns over the following days as the muscle undertakes a predictable progression toward tissue healing. Current imaging studies have been used clinically to document the site of injury to the muscle-tendon junction. The commonly injured muscles have been described and include the hamstring, the rectus femoris, gastrocnemius, and adductor longus muscles. Injuries inconsistent with involvement of a single muscle-tendon junction proved to be at tendinous origins rather than within the muscle belly. Important information has also been provided regarding injuries with poor prognosis, which are potentially repairable surgically, including injuries to the rectus femoris muscle, the hamstring origin, and the abdominal wall. Data important to the management of common muscle injuries have been published. The risks of reinjury have been documented. The early efficacy and potential for long-term risks of nonsteroidal antiinflammatory agents have been shown. New data can also be applied to the field

  15. High strain rate behaviour of polypropylene microfoams

    Science.gov (United States)

    Gómez-del Río, T.; Garrido, M. A.; Rodríguez, J.; Arencón, D.; Martínez, A. B.

    2012-08-01

    Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc.) or personal safety (helmets, knee-pads, etc.). In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry) is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s-1) in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB). Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  16. High strain rate behaviour of polypropylene microfoams

    Directory of Open Access Journals (Sweden)

    Martínez A.B.

    2012-08-01

    Full Text Available Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc. or personal safety (helmets, knee-pads, etc.. In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s−1 in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB. Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  17. A miniaturized microbial fuel cell with three-dimensional graphene macroporous scaffold anode demonstrating a record power density of over 10 000 W m-3

    Science.gov (United States)

    Ren, Hao; Tian, He; Gardner, Cameron L.; Ren, Tian-Ling; Chae, Junseok

    2016-02-01

    A microbial fuel cell (MFC) is a bio-inspired renewable energy converter which directly converts biomass into electricity. This is accomplished via the unique extracellular electron transfer (EET) of a specific species of microbe called the exoelectrogen. Many studies have attempted to improve the power density of MFCs, yet the reported power density is still nearly two orders of magnitude lower than other power sources/converters. Such a low performance can primarily be attributed to two bottlenecks: (i) ineffective electron transfer from microbes located far from the anode and (ii) an insufficient buffer supply to the biofilm. This work takes a novel approach to mitigate these two bottlenecks by integrating a three-dimensional (3D) macroporous graphene scaffold anode in a miniaturized MFC. This implementation has delivered the highest power density reported to date in all MFCs of over 10 000 W m-3. The miniaturized configuration offers a high surface area to volume ratio and improved mass transfer of biomass and buffers. The 3D graphene macroporous scaffold warrants investigation due to its high specific surface area, high porosity, and excellent conductivity and biocompatibility which facilitates EET and alleviates acidification in the biofilm. Consequently, the 3D scaffold houses an extremely thick and dense biofilm from the Geobacter-enriched culture, delivering an areal/volumetric current density of 15.51 A m-2/31 040 A m-3 and a power density of 5.61 W m-2/11 220 W m-3, a 3.3 fold increase when compared to its planar two-dimensional (2D) control counterparts.A microbial fuel cell (MFC) is a bio-inspired renewable energy converter which directly converts biomass into electricity. This is accomplished via the unique extracellular electron transfer (EET) of a specific species of microbe called the exoelectrogen. Many studies have attempted to improve the power density of MFCs, yet the reported power density is still nearly two orders of magnitude lower than

  18. Well Conductor Strain Monitoring

    Science.gov (United States)

    2014-05-06

    comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2014 2. REPORT TYPE 3. DATES...849,429; filed on June 26, 2013 by the inventor, Dr. Anthony Ruffa and entitled “ SUBSEA WELL CONDUCTOR STRAIN MONITORING”. STATEMENT OF

  19. Bonding the superalkali M3O (M = Li and K): An effective strategy to improve the electronic and nonlinear optical properties of the inorganic B40 nanocage

    Science.gov (United States)

    Li, Zhipeng; Yu, Guangtao; Zhang, Xueying; Huang, Xuri; Chen, Wei

    2017-10-01

    Inspired by the fascinating finding of all-boron fullerene B40 (Nat Chem, 2014, 6, 727), we propose a new and effective strategy to construct a series of typical Donor-Acceptor (D-A) frameworks via linking the superalkali M3O (M = Li and K) unit with the low ionization potential to the B40 nanocage with large electron affinity. By means of the density functional theory computations, we have systematically investigated the structures, electronic properties, the first and second hyperpolarizabilities of these modified B40 nanocage systems. Owing to the formation of a B-O chemical bond, these composite systems (M3O)n-B40 (M = Li and K, n = 1 and 2) can possess the considerably large binding energy ranging from 57.0 to 99.8 kcal/mol, indicating their high structure stabilities. Compared with the pristine B40 nanocage, linking the superalkali M3O can effectively narrow the wide energy gap from the original 2.86 eV to 0.61-1.11 eV, and significantly increase the first and second hyperpolarizabilities to as large as 5.00 × 104-2.46 × 105 au and 1.48 × 107-4.85 × 108 au, respectively, owing to the occurrence of evident electron transfer process in this kind of typical D-A framework. These fascinating findings will be advantageous for promoting the potential applications of the inorganic boron-based nanosystems in the new type of electronic nanodevices and high-performance nonlinear optical materials.

  20. Study of the continuum removal method for the Moon Mineralogy Mapper (M3) and its application to Mare Humorum and Mare Nubium

    Science.gov (United States)

    Zhang, Xun-Yu; Ouyang, Zi-Yuan; Zhang, Xiao-Meng; Chen, Yuan; Tang, Xiao; Xu, Ao-Ao; Tang, Ze-Sheng; Wu, Yun-Zhao

    2016-07-01

    The absorption band center of visible and near infrared reflectance spectra is a key spectral parameter for lunar mineralogical studies, especially for the mafic minerals (olivine and pyroxene) of mare basalts, which have two obvious absorption bands at 1000 nm (Band I) and 2000nm (Band II). Removal of the continuum from spectra, which was developed by Clark and Roush and used to isolate the particular absorption feature, is necessary to estimate this parameter. The Moon Mineralogy Mapper (M3) data are widely used for lunar mineral identification. However, M3 data show a residual thermal effect, which interferes with the continuum removal, and systematic differences exist among optical data taken during different optical periods. This study investigated a suitable continuum removal method and compared the difference between two sets of M3 data taken during different optical periods, Optical Period 1B (OP1B) and Optical Period 2A (OP2A). Two programs for continuum removal are reported in this paper. Generally, a program respectively constructs two straight lines across Band I and Band II to remove the continuum, which is recommended for locating band centers, because it can find the same Band I center with different right endpoints. The optimal right endpoint for continuum removal is mainly dominated by two optical period data at approximately 2480 and 2560nm for OP1B and OP2A data, respectively. The band center values derived from OP1B data are smaller than those derived from OP2A data in Band I but larger in Band II, especially for the spectra using longer right endpoints (>2600 nm). This may be due to the spectral slopes of OP1B data being steeper than those of OP2A data in Band I but gentler in Band II. These results were applied to Mare Humorum and Mare Nubium, and the measurements were found to mainly vary from intermediate- to high-Ca pyroxene.

  1. Classification of Acute Myelogenous Leukemia (AML M2 and AML M3) using Momentum Back Propagation from Watershed Distance Transform Segmented Images

    Science.gov (United States)

    Suryani, Esti; Wiharto; Palgunadi, Sarngadi; Nurcahya Pradana, TP

    2017-01-01

    This study uses image processing to analyze white blood cell with leukemia indicated that includes the identification, analysis of shapes and sizes, as well as white blood cell count indicated the symptoms of leukemia. A case study in this research was blood cells, from the type of leukemia Acute Myelogenous Leukemia (AML), M2 and M3 in particular. Image processing operations used for segmentation by utilizing the color conversion from RGB (Red, Green dab Blue) to obtain white blood cell candidates. Furthermore, the white blood cells candidates are separated by other cells with active contour without edge. WBC (White Blood Cell) results still have intersected or overlap condition. Watershed distance transform method can separate overlap of WBC. Furthermore, the separation of the nucleus from the cytoplasm using the HSI (Hue Saturation Intensity). The further characteristic extraction process is done by calculating the area WBC, WBC edge, roundness, the ratio of the nucleus, the mean and standard deviation of pixel intensities. The feature extraction results are used for training and testing in determining the classification of AML: M2 and M3 by using the momentum backpropagation algorithm. The classification process is done by testing the numeric data input from the feature extraction results that have been entered in the database. K-Fold validation is used to divide the amount of training data and to test the classification of AML M2 and M3. The experiment results of eight images trials, the result, was 94.285% per cell accuracy and 75% per image accuracy

  2. Acupuncture at heterotopic acupoints facilitates distal colonic motility via activating M3 receptors and somatic afferent C-fibers in normal, constipated, or diarrhoeic rats.

    Science.gov (United States)

    Gao, X; Qin, Q; Yu, X; Liu, K; Li, L; Qiao, H; Zhu, B

    2015-12-01

    Previous studies have demonstrated the efficacy of somatic stimulation for patients with gastrointestinal motility disorders. However, little effort has been made to investigate the effects of acupuncture on colonic motility, particularly in pathological conditions. The precise mechanism employed in the regulation of acupuncture on colonic motility still remains unclear. We assessed the effect of acupuncture at heterotopic acupoints on distal colonic motility using a warm-water-filled manometric balloon inserted 5-6 cm into the rectum of anesthetized normal rats or rats with diarrhea or constipation. Choline chloride, 4-DAMP, cobra venom and capsaicin were separately applied to investigate the role of M3 receptors in the regulation of distal colonic motility by acupuncture at heterotopic acupoints, and whether Aδ- and/or C-fibers are required for triggering distal colonic motility by acupuncture. Acupuncture at heterotopic acupoints increased distal colonic motility not only in normal rats but also in rats with constipation or diarrhea. M3 receptors play an important role in the facilitation of distal colonic motility triggered by acupuncture at heterotopic acupoints. Afferent nerve Aδ- and C-fibers mediate the transduction of the acupuncture signal and C-fibers are essential for enhancing the effect of acupuncture at the heterotopic acupoint on distal colonic motility. Our results reveal that acupuncture at heterotopic acupoints increases distal colonic motility regardless of normal or pathological conditions via predominately activating C-fibers of somatic afferent nerve and M3 receptors. © 2015 The Authors.Neurogastroenterology & Motility published by John Wiley & Sons Ltd.

  3. Definición y cálculo del aire acondicionado de los espacios habilitados de un buque LNG de 130.000 m3

    OpenAIRE

    Morató Carrasco, David

    2015-01-01

    El presente proyecto tiene como fin la definición y el cálculo del sistema de aire acondicionado de los espacios habilitados de un buque tipo LNG con una capacidad de carga de 130.000 M3. Los objetivos del sistema de aire acondicionado del buque son, a grandes rasgos, mantener en los espacios habilitados la temperatura definida en la especificación del buque y proporcionar una buena ventilación de los espacios de manera que evitemos un aire viciado. Estos objetivos los al...

  4. The detection and classification of blast cell in Leukaemia Acute Promyelocytic Leukaemia (AML M3) blood using simulated annealing and neural networks

    OpenAIRE

    W. Ismail; Hassan, R.; PAYNE, A.; Swift, S

    2011-01-01

    This paper was delivered at AIME 2011: 13th Conference on Artifical Intelligence in Medicine. This paper presents a method for the detection and classification of blast cells in M3 with others sub-types using simulated annealing and neural networks. In this paper, we increased our test result from 10 images to 20 images. We performed Hill Climbing, Simulated Annealing and Genetic Algorithms for detecting the blast cells. As a result, simulated annealing is the “best” heuristic search for d...

  5. Construction of an M3L2A6 cage with small windows from a flexible tripodal ligand and Cu(hfac)3.

    Science.gov (United States)

    Ikeda, Mari; Ohno, Keiji; Kasumi, Yuki; Kuwahara, Shunsuke; Habata, Yoichi

    2014-01-06

    An M3L2A6 cage has been prepared with small windows from a tripodal ligand, L, and Cu(hfac)2. Cold spray ionization mass spectrometry of a mixture of L and Cu(hfac)2 revealed the formation of a Cu3L2hfac6 cage in solution. X-ray crystallography showed that the Cu3L2hfac6 cage included neutral molecules such as THF and CHCl3. Furthermore, the six hfac anions have been shown to play an important role in holding neutral guest molecules securely in place.

  6. Comparison of Analysis Results Between 2D/1D Synthesis and RAPTOR-M3G in the Korea Standard Nuclear Plant (KSNP

    Directory of Open Access Journals (Sweden)

    Lim Mi Joung

    2016-01-01

    Full Text Available The 2D/1D synthesis methodology has been used to calculate the fast neutron (E > 1.0 MeV exposure to the beltline region of the reactor pressure vessel. This method uses the DORT 3.1 discrete ordinates code and the BUGLE-96 cross-section library based on ENDF/B-VI. RAPTOR-M3G (RApid Parallel Transport Of Radiation-Multiple 3D Geometries which performs full 3D calculations was developed and is based on domain decomposition algorithms, where the spatial and angular domains are allocated and processed on multi-processor computer architecture. As compared to traditional single-processor applications, this approach reduces the computational load as well as the memory requirement per processor. Both methods are applied to surveillance test results for the Korea Standard Nuclear Plant (KSNP-OPR (Optimized Power Reactor 1000 MW. The objective of this paper is to compare the results of the KSNP surveillance program between 2D/1D synthesis and RAPTOR-M3G. Each operating KSNP has a reactor vessel surveillance program consisting of six surveillance capsules located between the core and the reactor vessel in the downcomer region near the reactor vessel wall. In addition to the In-Vessel surveillance program, an Ex-Vessel Neutron Dosimetry (EVND program has been implemented. In order to estimate surveillance test results, cycle-specific forward transport calculations were performed by 2D/1D synthesis and by RAPTOR-M3G. The ratio between measured and calculated (M/C reaction rates will be discussed. The current plan is to install an EVND system in all of the Korea PWRs including the new reactor type, APR (Advanced Power Reactor 1400 MW. This work will play an important role in establishing a KSNP-specific database of surveillance test results and will employ RAPTOR-M3G for surveillance dosimetry location as well as positions in the KSNP reactor vessel.

  7. Mucosal immunization with recombinant adenoviral vectors expressing murine gammaherpesvirus-68 genes M2 and M3 can reduce latent viral load

    DEFF Research Database (Denmark)

    Hoegh-Petersen, Mette; Thomsen, Allan R; Christensen, Jan P

    2009-01-01

    of the gammaherpesvirinae speaks against using a similar approach in humans. DNA immunization with plasmids encoding the MHV-68 genes M2 or M3 caused a reduction in either acute or early latent viral load, respectively, but neither immunization had an effect at times later than 14 days post-infection. Adenovirus......-based vaccines are substantially more immunogenic than DNA vaccines and can be applied to induce mucosal immunity. Here we show that a significant reduction of the late viral load in the spleens, at 60 days post-infection, was achieved when immunizing mice both intranasally and subcutaneously with adenoviral...

  8. RASSF1A hypermethylation is associated with ASXL1 mutation and indicates an adverse outcome in non-M3 acute myeloid leukemia

    Directory of Open Access Journals (Sweden)

    Liu F

    2017-08-01

    Full Text Available Fang Liu,1,* Ming Gong,2,* Li Gao,2,* Xiaoping Cai,3 Hui Zhang,2 Yigai Ma2 1Department of Oncology, Chinese PLA General Hospital, 2Department of Hematology, China-Japan Friendship Hospital, 3Department of Geriatric Medicine, Army General Hospital, Beijing, People’s Republic of China *These authors contributed equally to this work Objective: The purpose of this study was to evaluate the frequency of RASSF1A hypermethylation in patients with acute myeloid leukemia (AML, in an attempt to modify the current molecular model for disease prognosis.Materials and methods: Aberrant RASSF1A promoter methylation levels were assessed in 226 newly diagnosed non-M3 AML patients and 30 apparently healthy controls, by quantitative methylation-specific polymerase chain reaction. Meanwhile, RASSF1A mRNA levels were detected by real-time quantitative polymerase chain reaction. Furthermore, hematological characteristics, cytogenetic abnormalities, and genetic aberrations were assessed. Finally, associations of RASSF1A hypermethylation with clinical outcomes were evaluated.Results: RASSF1A hypermethylation was observed in 23.0% of patients with non-M3 AML (52/226, but not in controls. Meanwhile, hypermethylation of the RASSF1A promoter was significantly associated with ASXL1 mutation. Furthermore, the log-rank test revealed that RASSF1A hypermethylation indicated decreased relapse-free survival (RFS and overall survival (OS in patients with non-M3 AML (P=0.012 and P=0.014, respectively. In multivariate analysis, RASSF1A hypermethylation was an independent prognostic factor for RFS (P=0.040, but not for OS (P=0.060.Conclusion: Hypermethylation of the RASSF1A promoter is associated with ASXL1 mutation in non-M3 AML patients, likely indicating poor outcome. These findings provide a molecular basis for stratified diagnosis and prognostic evaluation. Keywords: RASSF1A, hypermethylation, acute myeloid leukemia, clinical outcome, survival

  9. TREATMENT OF NATURAL GAS BY ADSORPTION OF CO2

    Directory of Open Access Journals (Sweden)

    Kristýna Hádková

    2015-12-01

    Full Text Available Apart from burning, one of the possible uses of natural gas is as a fuel for motor vehicles. There are two types of fuel from natural gas — CNG (Compressed Natural Gas or LNG (Liquefied Natural Gas. Liquefaction of natural gas is carried out for transport by tankers, which are an alternative to long-distance gas pipelines, as well as for transport over short distance, using LNG as a fuel for motor vehicles. A gas adjustment is necessary to get LNG. As an important part of the necessary adjustment of natural gas to get LNG, a reduction of CO2 is needed. There is a danger of the carbon dioxide freezing during the gas cooling. This work deals with the testing of adsorption removal of CO2 from natural gas. The aim of these measurements was to find a suitable adsorbent for CO2 removal from natural gas. Two different types of adsorbents were tested: activated carbon and molecular sieve. The adsorption properties of the selected adsorbents were tested and compared. The breakthrough curves for CO2 for both adsorbents were measured. The conditions of the testing were estimated according to conditions at a gas regulation station — 4.0MPa pressure and 8 °C temperature. Natural gas was simulated by model gas mixture during the tests. The breakthrough volume was set as the gas volume passing through the adsorber up to the CO2 concentration of 300 ml/m3 in the exhaust gas. The thermal and pressure desorption of CO2 from saturated adsorbents were also tested after the adsorption.

  10. The Wyckoff positional order and polyhedral intergrowth in the M3B2- and M5B3-type boride precipitated in the Ni-based superalloys

    Science.gov (United States)

    Hu, X. B.; Zhu, Y. L.; Sheng, N. C.; Ma, X. L.

    2014-12-01

    Ni-based single superalloys play a crucial role in the hottest parts of jet engines. However, due to the complex geometry and macro-segregation during the solidification process, the cast defect such as stray grains is inevitable. Therefore, the transient liquid phase (TLP) bonding which can join several small single crystalline castings together is gradually believed to be an effective method for improving the yields of production of the complex components. The melting point depressant element B is always added into the interlayer filler material. Consequently, borides including the M3B2 and M5B3 phase usually precipitate during the TLP bonding process. So a comprehensive knowledge of the fine structural characteristics of the borides is very critical for an accurate evaluation of the TLP bonding process. In this work, by means of the aberration-corrected transmission electron microscopy, we show, at an atomic scale, the Wyckoff positional order phenomenon of the metal atoms in the unit cell of M3B2- and M5B3-type boride. Meanwhile, the defect along the (001) plane of the above two types of boride are determined to be the polyhedral intergrowth with complex configurations.

  11. Compositional diversity of near-, far-side transitory zone around Naonobu, Webb and Sinus Successus craters: Inferences from Chandrayaan-1 Moon Mineralogy Mapper (M3) data

    Indian Academy of Sciences (India)

    Rishikesh Bharti; D Ramakrishnan; K D Singh

    2014-02-01

    This study investigated the potential of Moon Mineralogy Mapper (M3) data for studying compositional variation in the near-, far-side transition zone of the lunar surface. For this purpose, the radiance values of the M3 data were corrected for illumination and emission related effects and converted to apparent reflectance. Dimensionality of the calibrated reflectance image cube was reduced using Independent Component Analysis (ICA) and endmembers were extracted by using Pixel Purity Index (PPI) algorithm. The selected endmembers were linearly unmixed and resolved for mineralogy using United States Geological Survey (USGS) library spectra of minerals. These mineralogically resolved endmembers were used to map the compositional variability within, and outside craters using Spectral Angle Mapper (SAM) algorithm. Cross validation for certain litho types was attempted using band ratios like Optical Maturity (OMAT), Color Ratio Composite and Integrated Band Depth ratio (IBD). The identified lithologies for highland and basin areas match well with published works and strongly support depth related magmatic differentiation. Prevalence of pigeonite-basalt, pigeonite-norite and pyroxenite in crater peaks and floors are unique to the investigated area and are attributed to local, lateral compositional variability in magma composition due to pressure, temperature, and rate of cooling.

  12. Tardigrade Resistance to Space Effects: First Results of Experiments on the LIFE-TARSE Mission on FOTON-M3 (September 2007)

    Science.gov (United States)

    Rebecchi, Lorena; Altiero, Tiziana; Guidetti, Roberto; Cesari, Michele; Bertolani, Roberto; Negroni, Manuela; Rizzo, Angela M.

    2009-08-01

    The Tardigrade Resistance to Space Effects (TARSE) project, part of the mission LIFE on FOTON-M3, analyzed the effects of the space environment on desiccated and active tardigrades. Four experiments were conducted in which the eutardigrade Macrobiotus richtersi was used as a model species. Desiccated (in leaf litter or on paper) and hydrated tardigrades (fed or starved) were flown on FOTON-M3 for 12 days in September 2007, which, for the first time, allowed for a comparison of the effects of the space environment on desiccated and on active animals. In this paper, we report the experimental design of the TARSE project and data on tardigrade survival. In addition, data on survival, genomic DNA integrity, Hsp70 and Hsp90 expressions, antioxidant enzyme contents and activities, and life history traits were compared between hydrated starved tardigrades flown in space and those maintained on Earth as a control. Microgravity and radiation had no effect on survival or DNA integrity of active tardigrades. Hsp expressions between the animals in space and the control animals on Earth were similar. Spaceflight induced an increase of glutathione content and its related enzymatic activities. Catalase and superoxide dismutase decreased with spaceflight, and thiobarbituric acid reactive substances did not change. During the flight mission, tardigrades molted, and females laid eggs. Several eggs hatched, and the newborns exhibited normal morphology and behavior.

  13. Constraints on olivine-rich rock types on the Moon as observed by Diviner and M3: Implications for the formation of the lunar crust

    Science.gov (United States)

    Arnold, J. A.; Glotch, T. D.; Lucey, P. G.; Song, E.; Thomas, I. R.; Bowles, N. E.; Greenhagen, B. T.

    2016-07-01

    We place upper limits on lunar olivine abundance using midinfrared (5-25 µm) data from the Lunar Reconnaissance Orbiter Diviner Lunar Radiometer Experiment (Diviner) along with effective emissivity spectra of mineral mixtures in a simulated lunar environment. Olivine-bearing, pyroxene-poor lithologies have been identified on the lunar surface with visible-near-infrared (VNIR) observations. Since the Kaguya Spectral Profiler (SP) VNIR survey of olivine-rich regions is the most complete to date, we focus this work on exposures identified by that study. We first confirmed the locations with VNIR data from the Moon Mineralogy Mapper (M3) instrument. We then developed a Diviner olivine index from our laboratory data which, along with M3 and Lunar Reconnaissance Orbiter Camera wide-angle camera data, was used to select the geographic area over which Diviner emissivity data were extracted. We calculate upper limits on olivine abundance for these areas using laboratory emissivity spectra of anorthite-forsterite mixtures acquired under lunar-like conditions. We find that these exposures have widely varying olivine content. In addition, after applying an albedo-based space weathering correction to the Diviner data, we find that none of the areas are unambiguously consistent with concentrations of forsterite exceeding 90 wt %, in contrast to the higher abundance estimates derived from VNIR data.

  14. Tardigrade Resistance to Space Effects: first results of experiments on the LIFE-TARSE mission on FOTON-M3 (September 2007).

    Science.gov (United States)

    Rebecchi, Lorena; Altiero, Tiziana; Guidetti, Roberto; Cesari, Michele; Bertolani, Roberto; Negroni, Manuela; Rizzo, Angela M

    2009-01-01

    The Tardigrade Resistance to Space Effects (TARSE) project, part of the mission LIFE on FOTON-M3, analyzed the effects of the space environment on desiccated and active tardigrades. Four experiments were conducted in which the eutardigrade Macrobiotus richtersi was used as a model species. Desiccated (in leaf litter or on paper) and hydrated tardigrades (fed or starved) were flown on FOTON-M3 for 12 days in September 2007, which, for the first time, allowed for a comparison of the effects of the space environment on desiccated and on active animals. In this paper, we report the experimental design of the TARSE project and data on tardigrade survival. In addition, data on survival, genomic DNA integrity, Hsp70 and Hsp90 expressions, antioxidant enzyme contents and activities, and life history traits were compared between hydrated starved tardigrades flown in space and those maintained on Earth as a control. Microgravity and radiation had no effect on survival or DNA integrity of active tardigrades. Hsp expressions between the animals in space and the control animals on Earth were similar. Spaceflight induced an increase of glutathione content and its related enzymatic activities. Catalase and superoxide dismutase decreased with spaceflight, and thiobarbituric acid reactive substances did not change. During the flight mission, tardigrades molted, and females laid eggs. Several eggs hatched, and the newborns exhibited normal morphology and behavior.

  15. Computational insights into the concomitant changes of hollow interior evolution in [SbnAunSbn]m (n=3, 4, 5, 6; m= -3, -2, -1, -2) complex

    Science.gov (United States)

    Zhu, Tingting; Ning, Ping; Tang, Lihong; Li, Kai; Bao, Shuangyou; Jin, Xu; Song, Xin; Zhang, Xiuying; Han, Shuang

    2017-02-01

    A series of novel all-metal sandwich species, [SbnAunSbn]m (n= 3, 4, 5, 6; m= -3, -2, -1, -2), are carefully designed and are systematically investigated in term of structure, bonding nature, stability, and potential application. These results show that [SbnAunSbn]m (n=3, 4, 5, 6; m= -3, -2, -1, -2), have local minimum values on their potential energy surfaces. For the Sb-Sb and Sb-Au bond, they are obviously covalent features, while in Au-Au, there is a typical aurophilic interaction. Furthermore, these species present expected stability owing to the positive dissociation energy, great Egap, ionization potential (IP), aromaticity and perfected mechanical stability. Interestingly, [Sb5Au5Sb5]- and [Sb6Au6Sb6]2- are aromatic, while both [Sb3Au3Sb3]3- and [Sb4Au4Sb4]2- possess conflicting aromaticity. And all the title species hold tube aromaticty and δ aromaticty. prediction The application suggests that the Sb site is favorable for absorbing CO in the units, and [Sb3Au3Sb3]3- is more suitable than others; CO is absorbed by the p-p interaction between the C and Sb atoms.

  16. H2-M3-restricted CD8+ T cells induced by peptide-pulsed dendritic cells confer protection against Mycobacterium tuberculosis.

    Science.gov (United States)

    Doi, Takehiko; Yamada, Hisakata; Yajima, Toshiki; Wajjwalku, Worawidh; Hara, Toshiro; Yoshikai, Yasunobu

    2007-03-15

    One of the oligopolymorphic MHC class Ib molecules, H2-M3, presents N-formylated peptides derived from bacteria. In this study, we tested the ability of an H2-M3-binding peptide, TB2, to induce protection in C57BL/6 mice against Mycobacterium tuberculosis. Immunization with bone marrow-derived dendritic cell (BMDC) pulsed with TB2 or a MHC class Ia-binding peptide, MPT64(190-198) elicited an expansion of Ag-specific CD8+ T cells in the spleen and the lung. The number of TB2-specific CD8+ T cells reached a peak on day 6, contracted with kinetics similar to MPT64(190-198)-specific CD8+ T cells and was maintained at an appreciable level for at least 60 days. The TB2-specific CD8+ T cells produced less effector cytokines but have stronger cytotoxic activity than MPT64(190-198)-specific CD8+ T cells. Mice immunized with TB2-pulsed BMDC as well as those with MPT64(190-198)-pulsed BMDC showed significant protection against an intratracheal challenge with M. tuberculosis H37Rv. However, histopathology of the lung in mice immunized with TB2-pulsed BMDC was different from mice immunized with MPT64(190-198)-pulsed BMDC. Our results suggest that immunization with BMDC pulsed with MHC class Ib-restricted peptides would be a useful vaccination strategy against M. tuberculosis.

  17. Gas Chromatography

    Science.gov (United States)

    Qian, Michael C.

    Gas chromatography (GC) has many applications in the analysis of food products. GC has been used for the determination of fatty acids, triglycerides, cholesterol, gases, water, alcohols, pesticides, flavor compounds, and many more. While GC has been used for other food components such as sugars, oligosaccharides, amino acids, peptides, and vitamins, these substances are more suited to analysis by high performance liquid chromatography. GC is ideally suited to the analysis of volatile substances that are thermally stable. Substances such as pesticides and flavor compounds that meet these criteria can be isolated from a food and directly injected into the GC. For compounds that are thermally unstable, too low in volatility, or yield poor chromatographic separation due to polarity, a derivatization step must be done before GC analysis. The two parts of the experiment described here include the analysis of alcohols that requires no derivatization step, and the analysis of fatty acids which requires derivatization. The experiments specify the use of capillary columns, but the first experiment includes conditions for a packed column.

  18. Joint M3 and Diviner Analysis of the Mineralogy, Glass Composition, and Country Rock Content of Pyroclastic Deposits in Oppenheimer Crater

    Science.gov (United States)

    Bennett, Kristen A.; Horgan, Briony H. N.; Greenhagen, Benjamin T.; Allen, Carlton C.; Paige, David A.; Bell, James F., III

    2013-01-01

    Here we present our analysis of the near- and mid-infrared spectral properties of pyroclastic deposits within the floor fractured Oppenheimer Crater that are hypothesized to be Vulcanian in origin. These are the first results of our global study of lunar pyroclastic deposits aimed at constraining the range of eruption processes on the Moon. In the near-infrared, we have employed a new method of spectral analysis developed in Horgan et al. (2013) of the 1 ?m iron absorption band in Chandrayaan-1 Moon Mineralogy Mapper (M3) spectra. By analyzing both the position and shape of the 1 ?m band we can detect and map the distribution of minerals, glasses, and mixtures of these phases in pyroclastic deposits. We are also using mid-infrared spectra from the Lunar Reconnaissance Orbiter Diviner Lunar Radiometer Experiment to develop 200 m/pixel Christiansen Feature (CF) maps, which correlate with silica abundance. One of the benefits of using CF maps for analysis of pyroclastic deposits is that they can be used to detect silicic country rock that may have been emplaced by Vulcanian-style eruptions, and are sensitive to iron abundance in glasses, neither of which is possible in the near-infrared. M3 analysis reveals that the primary spectral endmembers are low-calcium pyroxene and iron-bearing glass, with only minor high-calcium pyroxene, and no detectable olivine. The large deposit in the south shows higher and more extensive glass concentrations than the surrounding deposits. We interpret the M3 spectra of the pyroclastic deposits as indicating a mixture of low-calcium pyroxene country rock and juvenile glass, and no significant olivine. Analysis of Diviner CF maps of the Oppenheimer crater floor indicates an average CF value of 8.16, consistent with a mixture of primarily plagioclase and some pyroxene. The average CF values of the pyroclastic deposits range from 8.31 in the SW to 8.24 in the SE. Since CF values within the deposits are as high as 8.49, the lower average CF

  19. Value of interphase fluorescence in situ hybridization in diagnosing acute myeloid leukemia M2 and M3%间期荧光原位杂交技术在急性髓系白血病M2和M3型诊断中的应用

    Institute of Scientific and Technical Information of China (English)

    许民; 周永安; 赵瑾; 杜苏萌; 吴坚锐

    2008-01-01

    目的 探讨间期荧光原位杂交技术(FISH)在急性髓系白血病(AML)M2和M3诊断中的意义.方法 对初治的9例AML-M3、12例AML-M3及10例未能确定M2或M3的AML患者,应用FISH和反转录-聚合酶链反应(RT-PCR)检测AMLI/ETO和PML/RARα融合基因,协助诊断和指导治疗.结果 9例AML-M2中AMLI/ETO融合基因阳性率44.4%(4/9);12例AML-M3中PML/RARα融合基因阳性率83.3%(10/12),其中1例AML1/ETO融合基因阳性.确诊为AML-M2;10例AML中AML1/ETO融合基因阳性率30%(3/10),PML/RAR Ot融合基因阳性率50%(5/10),其余2例未检测到以上两种融合基因.结论 FISH是一种敏感、简便的分子遗传学新技术,具有高效、快速、灵敏等优点,对诊断AML的分型具有重要帮助,可进一步指导临床治疗.%Objective To investigate the value of interphase fluorescence in situ hybridization(FISH)technique and the detection of fusion gene in the diagnosis of acute myeloid leukemia(AML)M2 and M3 Methods FISH was used to detect the AML1/ETO fusion gene and/or PML/RARα fusion gene in incipient cases including 9 AML-M2, 12 AML-M3 and 10 AML undetermined as AML-M2 or AML-M3 primarily diagnosed by routine morphology though bone marrow,cytochemical staining and immunophenotyping,which can help diagnose and guide clinical therapy.Results 4 of 9 AML-M2 cases were AML1/ETO positive.Among 12 AML-M3 cases,10 were PML/RARα positive.1 case was detected AML1/ETO fusion gene.In 10 untonfirmed M3 or M2,3 case8 showed AML1/ETO,5 showed PMIJRARot fusion gene and the rest showed neither of the genes.Conclusion As a new technique of the molecular genetics,FISH is accurate, rapid and efficient.It would be of significance not only at diagnosis of AML,but also for subsequent clinical decision-making.

  20. Accelerated Gas Carburizing (URX Gas Carburizing)

    Institute of Scientific and Technical Information of China (English)

    Yoshikazu Shimosato; Mamoru Kamitani; Hiroyuki Nakatsu

    2004-01-01

    URX gas carburizing is an accelerated gas carburizing method with 50% CO + 50% H2 gas which comes from CH4 gas + CO2 gas. By using this gas composition, the carburizing reaction rate increases to the maximum and the controllability of carbon potential improves. A carbon mass flow rate is the product of the carburizing reaction rate multiplied by the difference of carbon percent between carbon potential of the gas and the carbon content of the surface of treated steel parts. We have obtained excellent results from the experimental tests at our laboratory as mentioned bellow. 1)Carburizing time can be shortened by 40% for 0.5 - 0.9 mm effective case depth. 2) Uniform carburizing case depth 3) Less internal oxidation with the same case depth. We have already developed the new roller hearth type continuous carburizing furnace and the new URX gas generator.

  1. Strains in General Relativity

    CERN Document Server

    Bini, Donato; Geralico, Andrea

    2014-01-01

    The definition of relative accelerations and strains among a set of comoving particles is studied in connection with the geometric properties of the frame adapted to a "fiducial observer." We find that a relativistically complete and correct definition of strains must take into account the transport law of the chosen spatial triad along the observer's congruence. We use special congruences of (accelerated) test particles in some familiar spacetimes to elucidate such a point. The celebrated idea of Szekeres' compass of inertia, arising when studying geodesic deviation among a set of free-falling particles, is here generalized to the case of accelerated particles. In doing so we have naturally contributed to the theory of relativistic gravity gradiometer. Moreover, our analysis was made in an observer-dependent form, a fact that would be very useful when thinking about general relativistic tests on space stations orbiting compact objects like black holes and also in other interesting gravitational situations.

  2. Noble gas fractionation during subsurface gas migration

    Science.gov (United States)

    Sathaye, Kiran J.; Larson, Toti E.; Hesse, Marc A.

    2016-09-01

    Environmental monitoring of shale gas production and geological carbon dioxide (CO2) storage requires identification of subsurface gas sources. Noble gases provide a powerful tool to distinguish different sources if the modifications of the gas composition during transport can be accounted for. Despite the recognition of compositional changes due to gas migration in the subsurface, the interpretation of geochemical data relies largely on zero-dimensional mixing and fractionation models. Here we present two-phase flow column experiments that demonstrate these changes. Water containing a dissolved noble gas is displaced by gas comprised of CO2 and argon. We observe a characteristic pattern of initial co-enrichment of noble gases from both phases in banks at the gas front, followed by a depletion of the dissolved noble gas. The enrichment of the co-injected noble gas is due to the dissolution of the more soluble major gas component, while the enrichment of the dissolved noble gas is due to stripping from the groundwater. These processes amount to chromatographic separations that occur during two-phase flow and can be predicted by the theory of gas injection. This theory provides a mechanistic basis for noble gas fractionation during gas migration and improves our ability to identify subsurface gas sources after post-genetic modification. Finally, we show that compositional changes due to two-phase flow can qualitatively explain the spatial compositional trends observed within the Bravo Dome natural CO2 reservoir and some regional compositional trends observed in drinking water wells overlying the Marcellus and Barnett shale regions. In both cases, only the migration of a gas with constant source composition is required, rather than multi-stage mixing and fractionation models previously proposed.

  3. THE CHARACTERISTICS OF THE PRODUCTION AND PROCESSING OF OIL AND NATURAL GAS IN CROATIA FROM 2000 TO 2014

    Directory of Open Access Journals (Sweden)

    Josipa Velić

    2016-06-01

    Full Text Available This research analyzes the characteristics of the production and processing of oil, condensates and natural gas in the Republic of Croatia starting from 2000, until the end of 2014. Amounts of balance sheet (exploitable reserves of oil and condensates ranges from 9330,92 × 103 m3 in 2005, to 13 471,08 × 103 m3 in 2013, while extracted amounts are gradually declining from 1332,61 × 103 m3 to 639,96 × 103 m3. The ratio of extracted amounts and reserves is gradually declining, meaning that a slight increase in reserves does not affect the extracted amounts. Exploitable reserves of natural gas during the observed period fluctuate greatly. Being peaked in 2007, at 40,919.70 × 106 m3, they reached a low in 2014, at 17,932.98 × 106 m3. Unlike liquid hydrocarbons, the ratio of extracted and exploitable amounts is growing and peaked in 2014. Overall energy demands for oil in Croatia (shown as total consumption of crude oil amounted to 3032,8 × 103 m3 in 2013, while demands for natural gas amounted to 2809,90 × 106 m3. It is interesting to note that the consumption of oil is rapidly declining, which is a favorable trend from the standpoint of reducing emissions of greenhouse gases. While needs are partly covered by domestic exploitation, the dependence on imports of oil and natural gas is still evident and ranges from 75% to 84% for oil and 28% to 46% for natural gas, without major changes to the trend. The amounts of processed hydrocarbons are declining gradually, especially motor gasoline and fuel oil, while diesel fuel amounts remain mostly the same. Further research as well as development of the exploitation of oil and natural gas is of paramount importance, especially by investing in cadre education and new technologies.

  4. Desain Rantai Pasok Gas Alam Cair (LNG untuk Kebutuhan Pembangkit Listrik di Indonesia Bagian Timur

    Directory of Open Access Journals (Sweden)

    Made Arya Satya Dharma Putra

    2017-01-01

    Full Text Available Indonesia merupakan negara yang memiliki gas alam yang melimpah, namun kurangnya kesadaran masyarakat Indonesia untuk memanfaatkan gas tersebut untuk kebutuhan listrik di Indonesia yang sekarang sedang dalam krisis terutama di Indonesia Timur. Salah satu penyebab krisis tenaga listrik yang terjadi di Indonesia adalah tingginya nilai harga bahan bakar minyak, dimana High Speed Diesel Oil merupakan bahan bakar utama bagi pembangkit listrik di Indonesia. Gas alam cair atau Liquefied Natural Gas (LNG dapat menjadi solusi alternatif bahan bakar bagi pembangkit listrik di Indonesia.Studi kali ini bertujuan untuk pemanfaatan gas alam cair (LNG untuk kebutuhan pembangkit listrik di Indonesia Timur dengan menentukan pola distribusi LNG dengan menggunakan Blok Masela sebagai sumber LNG dan menggunakan kapal untuk mendistribusikannya. Terdapat 39 pembangkit yang tersebar di 4 pulau yaitu Maluku, Nusa Tenggara Barat, Nusa Tenggara Timur, dan Papua. Kapal yang digunakan untuk mendistribusikan terdapat 5 kapal dengan ukuran 2500 m3, 7500 m3, 10000 m3, 19500 m3, 23000 m3. Untuk mendapatkan rute distribusi, studi ini menggunakan metode Linear Programing dan dalam Vehicle Routing Problem. Hasil optimasi pada distribusi ini adalah rute dan kapal yang optimal / terbaik dengan biaya ekonomi yang minimal.Dari hasil penelitian ini pembangkit akan dibagi menjadi 5 cluster dimana terdapat 5 rute yang terpilih dengan menggunakan 6 kapal yaitu 5 kapal ukuran 2500 m3 dan 1 kapal dengan ukuran 7500m3. Biaya total yang diperlukan dalam mendistribusikan LNG sebesar US$ 111,863,119.15 untuk Opex dan US$ 283,967,000.00 untuk Capex. Hasil dari kajian ekonomi menunjukan bahwa margin penjualan yang terpilih adalah antara US$ 3.5 sampai US$ 3.9 dengan payback period selama 6.8 – 4.7 tahun tahun dari waktu operasi 20 tahun.

  5. Flue gas treatment with membrane gas absorption

    NARCIS (Netherlands)

    Klaassen, R.; Feron, P.H.M.; Jansen, A.E.

    1998-01-01

    Membrane gas absorption is a new, efficient and flexible way to carry out gas-liquid contacting operations with hollow fibre membranes. Advantages of gas absorption membranes over conventional G-L contactors are: -High specific surface area and rapid mass transfer resulting in very compact and low w

  6. A gas laser design

    Energy Technology Data Exchange (ETDEWEB)

    Syudzo, Y.; Nooya, Kh.

    1984-05-28

    A gas laser design that excludes direct contact between the gas medium and the atmosphere is proposed. The laser operates at a reduced gas pressure. After shutdown, a special system is used to increase the gas pressure inside the discharge chamber, which approaches atmospheric pressure. The laser employs an internal optical resonator. The electrical discharge which excites the gas medium originates from three electrodes located within the gas discharge tube.

  7. The central dynamics of M3, M13, and M92: stringent limits on the masses of intermediate-mass black holes

    Science.gov (United States)

    Kamann, S.; Wisotzki, L.; Roth, M. M.; Gerssen, J.; Husser, T.-O.; Sandin, C.; Weilbacher, P.

    2014-06-01

    We used the PMAS integral field spectrograph to obtain large sets of radial velocities in the central regions of three northern Galactic globular clusters: M3, M13, and M92. By applying the novel technique of crowded field 3D spectroscopy, we measured radial velocities for about 80 stars within the central ~10″ of each cluster. These are by far the largest spectroscopic datasets obtained in the innermost parts of these clusters up to now. To obtain kinematical data across the whole extent of the clusters, we complement our data with measurements available in the literature. We combine our velocity measurements with surface brightness profiles to analyse the internal dynamics of each cluster using spherical Jeans models, and investigate whether our data provide evidence for an intermediate-mass black hole in any of the clusters. The surface brightness profiles reveal that all three clusters are consistent with a core profile, although shallow cusps cannot be excluded. We find that spherical Jeans models with a constant mass-to-light ratio provide a good overall representation of the kinematical data. A massive black hole is required in none of the three clusters to explain the observed kinematics. Our 1σ (3σ) upper limits are 5300 M⊙ (12 000 M⊙) for M3, 8600 M⊙ (13 000 M⊙) for M13, and 980 M⊙ (2700 M⊙) for M92. A puzzling circumstance is the existence of several potential high velocity stars in M3 and M13, as their presence can account for the majority of the discrepancies that we find in our mass limits compared to M92. Based on observations collected at the Centro Astronómico Hispano-Alemán (CAHA) at Calar Alto, operated jointly by the Max-Planck Institut für Astronomie and the Instituto de Astrofísica de Andalucía (CSIC).Appendices are available in electronic form at http://www.aanda.orgTables D.1 to D.6 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (ftp://130.79.128.5) or via http://cdsarc

  8. What Are Sprains and Strains?

    Science.gov (United States)

    ... hands and arms a lot. Examples are gymnastics, tennis, rowing, and golf. People who play these sports sometimes strain their hand or arm. Elbow strains can also happen when playing sports. What ...

  9. Strain measurement based battery testing

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Jeff Qiang; Steiber, Joe; Wall, Craig M.; Smith, Robert; Ng, Cheuk

    2017-05-23

    A method and system for strain-based estimation of the state of health of a battery, from an initial state to an aged state, is provided. A strain gauge is applied to the battery. A first strain measurement is performed on the battery, using the strain gauge, at a selected charge capacity of the battery and at the initial state of the battery. A second strain measurement is performed on the battery, using the strain gauge, at the selected charge capacity of the battery and at the aged state of the battery. The capacity degradation of the battery is estimated as the difference between the first and second strain measurements divided by the first strain measurement.

  10. Draft evaluation of the frequency for gas sampling for the high burnup confirmatory data project

    Energy Technology Data Exchange (ETDEWEB)

    Stockman, Christine T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Alsaed, Halim A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bryan, Charles R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-26

    This report fulfills the M3 milestone M3FT-15SN0802041, “Draft Evaluation of the Frequency for Gas Sampling for the High Burn-up Storage Demonstration Project” under Work Package FT-15SN080204, “ST Field Demonstration Support – SNL”. This report provides a technically based gas sampling frequency strategy for the High Burnup (HBU) Confirmatory Data Project. The evaluation of: 1) the types and magnitudes of gases that could be present in the project cask and, 2) the degradation mechanisms that could change gas compositions culminates in an adaptive gas sampling frequency strategy. This adaptive strategy is compared against the sampling frequency that has been developed based on operational considerations. Gas sampling will provide information on the presence of residual water (and byproducts associated with its reactions and decomposition) and breach of cladding, which could inform the decision of when to open the project cask.

  11. Differentiation of Bacillus anthracis from Bacillus cereus by gas chromatographic whole-cell fatty acid analysis.

    OpenAIRE

    Lawrence, D.; Heitefuss, S; Seifert, H S

    1991-01-01

    Three strains of Bacillus anthracis and seven strains of Bacillus cereus were grown on complex medium and on synthetic medium. Gas chromatographic analysis of whole-cell fatty acids of strains grown on complex medium gave nearly identical fatty acid patterns. Fatty acid patterns of strains grown on synthetic medium showed a high content of branched-chain fatty acids. Significant differences between the fatty acid patterns of the two species were found. Odd iso/anteiso fatty acid ratios were a...

  12. Measurement and Modeling of Sorption-Induced Strain and Permeability Changes in Coal

    Energy Technology Data Exchange (ETDEWEB)

    Eric P. Robertson

    2005-10-01

    Strain caused by the adsorption of gases was measured in samples of subbituminous coal from the Powder River basin of Wyoming, U.S.A., and high-volatile bituminous coal from the Uinta-Piceance basin of Utah, U.S.A. using a newly developed strain measurement apparatus. The apparatus can be used to measure strain on multiple small coal samples based on the optical detection of the longitudinal strain. The swelling and shrinkage (strain) in the coal samples resulting from the adsorption of carbon dioxide, nitrogen, methane, helium, and a mixture of gases was measured. Sorption-induced strain processes were shown to be reversible and easily modeled with a Langmuir-type equation. Extended Langmuir theory was applied to satisfactorily model strain caused by the adsorption of gas mixtures using the pure gas Langmuir strain constants. The amount of time required to obtain accurate strain data was greatly reduced compared to other strain measurement methods. Sorption-induced changes in permeability were also measured as a function of pres-sure. Cleat compressibility was found to be variable, not constant. Calculated variable cleat-compressibility constants were found to correlate well with previously published data for other coals. During permeability tests, sorption-induced matrix shrinkage was clearly demonstrated by higher permeability values at lower pore pressures while holding overburden pressure constant. Measured permeability data were modeled using three dif-ferent permeability models from the open literature that take into account sorption-induced matrix strain. All three models poorly matched the measured permeability data because they overestimated the impact of measured sorption-induced strain on permeabil-ity. However, by applying an experimentally derived expression to the measured strain data that accounts for the confining overburden pressure, pore pressure, coal type, and gas type, the permeability models were significantly improved.

  13. [Population characteristics of mucous tissue basocytes in the Mongolian gerbil's jejunum following the 12-day orbital flight onboard space platform "Foton-M3"].

    Science.gov (United States)

    Atyakshin, D A; Bykov, E G

    2013-01-01

    Optical (light) microscopy and histochemical techniques were used for the first-ever studies of the population characteristics of tissue basocytes in the jejunum mucous membrane in three groups of gerbils Meriones unguiculatus: flown over 12 days aboard space platform Foton-M3, subjected to spaceflight factors simulation (SFS) in dedicated system Kontur-L (2) and maintained in standard vivarium conditions (control). Space flight was shown to induce quantitative and qualitative changes in the population of jejunum mucus labrocytes. Reduction of the basocytes population, alterations in age composition and ratio of the morphofunctional cell types in microgravity were indicative of cytoplasmic aggregation intensity, paths of biosynthesis products release into the intersticium, and their tinctorial properties. Also, heparin maturation and liberalization into the extracellular space in support of the jejunum mucus adaptive functions progressed with greater intensity. SFS did not affect size of the basocytes population significantly although it did cause qualitative rearrangements in the population structure.

  14. [Tissue-specific reaction of the mucous coat of herbals' small gut under the influence of spaceflight factors on board biosat "Foton M3"].

    Science.gov (United States)

    Atiakshin, D A; Bykov, E G; Il'in, E A; Pashkov, A N

    2011-01-01

    Methods of light-optical microscopy, morpho- and cytometry and histochemisty were used to study the epithelial lining of herbal's small gut after 12-day flight in biosat "Foton M3". Changes in mucous coat histoarchitectonics included branching of villi and cystic lumps lined with prismatic epithelium. Shortening of the mucous membrane villi was accompanied by reduction of prismatic epithelium height, increase in the number of goblet cells and change of their dislocation, stimulation of excretion of biosynthesis products on the brush border surface pointing to impairment of the interstitial barrier function. Nothing evidenced change in mitotic index of the crypts epithelium in animals of the vivarium control, in the Kontur facility simulating the flight condition, and in the space flown herbals. There was a minor individual variability of changes in the epithelium mucous membrane due to the simulated flight factors.

  15. Milestone M3FT-15OR0203112. Build redesigned HFIR rabbit capsules and make ready for insertion for irradiation in HFIR

    Energy Technology Data Exchange (ETDEWEB)

    Howard, Richard H [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McDuffee, Joel Lee [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Okuniewski, Maria A. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    This report details the fabrication and delivery of two Fuel Cycle Research and Development irradiation capsules (FCRP20 and FCRP03), with associated quality assurance documentation, to the High Flux Isotope Reactor. The capsules and documentation were delivered by September 30, 2015, thus meeting the deadline for milestone M3FT-15OR0203112. These irradiation experiments irradiate metal parallelepiped specimens that may consist of various compositions including uranium metal, steel, etc. This document contains a copy of the completed capsule fabrication request sheets, which detail all constituent components, pertinent drawings, etc., along with a detailed summary of the capsule assembly process performed by the Thermal Hydraulics and Irradiation Engineering Group (THIEG) in the Reactor and Nuclear Systems Division. A complete fabrication package record is maintained by THIEG and is available upon request.

  16. Synthesis and characterization of M3V2O8 (M = Ca, Sr and Ba) by a solid-state metathesis approach

    Indian Academy of Sciences (India)

    Purnendu Parhi; V Manivannan; Sandeep Kohli; Patrick Mccurdy

    2008-11-01

    A solid-state metathesis approach initiated by microwave energy has been successfully applied for the synthesis of orthovanadates, M3V2O8 (M = Ca, Sr, and Ba). The structural, vibrational, thermal, optical and chemical properties of synthesized powders are determined by powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, magnetic property measurements and diffused reflectance spectra in the UV–VIS range. The direct bandgap of the synthesized materials was found to be 3.55 ± 0.2 eV, 3.75 ± 0.2 eV and 3.57 ± 0.2 eV for Ca3V2O8, Sr3V2O8 and Ba3V2O8, respectively.

  17. Discovery of Eclipsing Binary Central Stars in the Planetary Nebulae M 3-16, H 2-29 and M 2-19

    CERN Document Server

    Miszalski, B; Moffat, A F J; Parker, Q A; Udalski, A

    2008-01-01

    Progress in understanding the formation and evolution of planetary nebulae (PN) has been restricted by a paucity of well-determined central star masses. To address this deficiency we aim to (i) significantly increase the number of known eclipsing binary central stars of PN (CSPN), and subsequently (ii) directly obtain their masses and absolute dimensions by combining their light-curve parameters with planned radial velocity data. Using photometric data from the third phase of the Optical Gravitational Lensing Experiment (OGLE) we have searched for periodic variability in a large sample of PN towards the Galactic Bulge using Fourier and phase-dispersion minimisation techniques. Among some dozen periodically variable CSPN found, we report here on three new eclipsing binaries: M 3-16, H 2-29 and M 2-19. We present images, confirmatory spectroscopy and light-curves of the systems.

  18. Y-chromosome loss as the sole karyotypic anomaly with 3'RARalpha submicroscopic deletion in a case of M3r subtype of acute promyelocytic leukemia.

    Science.gov (United States)

    Han, Yongsheng; Xue, Yongquan; Zhang, Jun; Pan, Jinlan; Wu, Yafang; Bai, Shuxiao

    2009-10-01

    Acute promyelocytic leukemia (APL) is characterized by the presence of a chromosomal rearrangement involving retinoic acid receptor alpha (RARalpha) gene generating the X-RARalpha fusion. We describe here a unique RARalpha gene rearrangement in a patient with M3r subtype of APL. Conventional cytogenetic analysis revealed Y-chromosome loss as the sole karyotypic anomaly. No X-RARalpha fusion was detected by fluorescence in situ hybridization (FISH) using PML/RARalpha dual-color dual-fusion translocation probe set, or RARalpha dual-color break apart rearrangement probe or reverse-transcription polymerase chain reaction (RT-PCR). However, FISH using RARalpha dual-color break apart rearrangement probe showed a deletion of the entire 3'-end of one allele of RARalpha gene. To our knowledge, this is the first documented APL with 3'RARalpha submicroscopic deletion which is not associated with X-RARalpha fusion. The molecular consequences of this anomaly remain to be elucidated.

  19. t(X;17) as the sole karyotypic anomaly in a case of M(3r) subtype of acute promyelocytic leukemia without RARalpha rearrangement.

    Science.gov (United States)

    Wang, Huan-Ping; Xu, Huan; Chen, Zhi-Mei; Tong, Xiang-Min; Qian, Wen-Bin; Jin, Jie

    2010-02-01

    We describe here a unique chromosomal abnormality found in a patient with M(3r) subtype of APL. Neither t(15;17) nor rearrangement of RARalpha was detected by routine R-banded chromosome as well as fluorescence in situ hybridization (FISH) analysis using PML/RARalpha dual-color dual-fusion translocation probe and RARalpha dual-color break apart rearrangement probe. Instead of the typical rearrangement between chromosomes 15 and 17, all cells analyzed had a translocation between X and 17 as the sole karyotypic anomaly. The translocation was conformed by whole chromosome painting (WCP) with painting probes of chromosomes X and 17. To our knowledge, this is the first documented APL with a novel translocation involving chromosomes X and 17 without RARalpha gene rearrangement. Copyright 2009. Published by Elsevier Ltd.

  20. Analysis of dosimetry from the H.B. Robinson unit 2 pressure vessel benchmark using RAPTOR-M3G and ALPAN

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, G.A. [Westinghouse Electric Company, LLC, 1000 Westinghouse Dr., Cranberry Township, PA 16066 (United States)

    2011-07-01

    Document available in abstract form only, full text of document follows: The dosimetry from the H. B. Robinson Unit 2 Pressure Vessel Benchmark is analyzed with a suite of Westinghouse-developed codes and data libraries. The radiation transport from the reactor core to the surveillance capsule and ex-vessel locations is performed by RAPTOR-M3G, a parallel deterministic radiation transport code that calculates high-resolution neutron flux information in three dimensions. The cross-section library used in this analysis is the ALPAN library, an Evaluated Nuclear Data File (ENDF)/B-VII.0-based library designed for reactor dosimetry and fluence analysis applications. Dosimetry is evaluated with the industry-standard SNLRML reactor dosimetry cross-section data library. (authors)

  1. International Conference on Harmonisation; Guidance on M3(R2) Nonclinical Safety Studies for the Conduct of Human Clinical Trials and Marketing Authorization for Pharmaceuticals; availability. Notice.

    Science.gov (United States)

    2010-01-21

    The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M3(R2) Nonclinical Safety Studies for the Conduct of Human Clinical Trials and Marketing Authorization for Pharmaceuticals.'' The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance, which is a revision of an existing guidance, discusses the types of nonclinical studies, their scope and duration, and their relation to the conduct of human clinical trials and marketing authorization for pharmaceuticals. The guidance is intended to facilitate the timely conduct of clinical trials and reduce the unnecessary use of animals and other drug development resources.

  2. Maternal Malaria and Malnutrition (M3) initiative, a pooled birth cohort of 13 pregnancy studies in Africa and the Western Pacific

    Science.gov (United States)

    Unger, Holger W; Gutman, Julie; Briand, Valerie; Fievet, Nadine; Valea, Innocent; Tinto, Halidou; d'Alessandro, Umberto; Landis, Sarah H; Adu-Afarwuah, Seth; Dewey, Kathryn G; Ter Kuile, Feiko; Dellicour, Stephanie; Ouma, Peter; Slutsker, Laurence; Terlouw, Dianne J; Kariuki, Simon; Ayisi, John; Nahlen, Bernard; Desai, Meghna; Madanitsa, Mwayi; Kalilani-Phiri, Linda; Ashorn, Per; Maleta, Kenneth; Mueller, Ivo; Stanisic, Danielle; Schmiegelow, Christentze; Lusingu, John; Westreich, Daniel; van Eijk, Anna Maria; Meshnick, Steven; Rogerson, Stephen

    2016-01-01

    Purpose The Maternal Malaria and Malnutrition (M3) initiative has pooled together 13 studies with the hope of improving understanding of malaria–nutrition interactions during pregnancy and to foster collaboration between nutritionists and malariologists. Participants Data were pooled on 14 635 singleton, live birth pregnancies from women who had participated in 1 of 13 pregnancy studies. The 13 studies cover 8 countries in Africa and Papua New Guinea in the Western Pacific conducted from 1996 to 2015. Findings to date Data are available at the time of antenatal enrolment of women into their respective parent study and at delivery. The data set comprises essential data such as malaria infection status, anthropometric assessments of maternal nutritional status, presence of anaemia and birth weight, as well as additional variables such gestational age at delivery for a subset of women. Participating studies are described in detail with regard to setting and primary outcome measures, and summarised data are available from each contributing cohort. Future plans This pooled birth cohort is the largest pregnancy data set to date to permit a more definite evaluation of the impact of plausible interactions between poor nutritional status and malaria infection in pregnant women on fetal growth and gestational length. Given the current comparative lack of large pregnancy cohorts in malaria-endemic settings, compilation of suitable pregnancy cohorts is likely to provide adequate statistical power to assess malaria–nutrition interactions, and could point towards settings where such interactions are most relevant. The M3 cohort may thus help to identify pregnant women at high risk of adverse outcomes who may benefit from tailored intensive antenatal care including nutritional supplements and alternative or intensified malaria prevention regimens, and the settings in which these interventions would be most effective. PMID:28003287

  3. Techniques for increasing boron fiber fracture strain

    Science.gov (United States)

    Dicarlo, J. A.

    1977-01-01

    Improvement in the strain-to-failure of chemical-vapor-deposition boron fibers is shown possible by contracting the tungsten boride core region and its inherent flaws. Results of three methods are presented in which etching and thermal-processing techniques were employed to achieve core flaw contraction by internal stresses available in the boron sheath. After commercially and treatment-induced surface flaws were removed from 203-micron (8-mil) fibers, the core flaw was observed to be essentially the only source of fiber fracture. Thus, fiber strain-to-failure was found to improve by an amount equal to the treatment-induced contraction on the core flaw. To date, average fracture strains and stresses greater than 1.4% and 5.5 GN/sq m (800 ksi), respectively, have been achieved. Commercial feasibility considerations suggest as the most cost-effective technique that method in which as-produced fibers are given a rapid heat treatment above 700 C. Preliminary results concerning the contraction kinetics and fracture behavior observed with this technique are presented and discussed for both high-vacuum and argon-gas heat-treatment environments.

  4. Whole genotype constellation of prototype feline rotavirus strains FRV-1 and FRV64 and their phylogenetic relationships with feline-like human rotavirus strains.

    Science.gov (United States)

    Gauchan, Punita; Sasaki, Eriko; Nakagomi, Toyoko; Do, Loan Phuong; Doan, Yen Hai; Mochizuki, Masami; Nakagomi, Osamu

    2015-02-01

    Feline rotaviruses, members of the species Rotavirus A, are an infrequent source of zoonotic infections, and were previously shown by RNA-RNA hybridization assays to possess two distinct genomic RNA constellations, represented by strains FRV-1 and FRV64. Due to the lack of whole genome sequence information for FRV-1, human rotavirus strain AU-1 has been used as a surrogate for the genotype constellation of feline rotaviruses. The aim of this study was to determine the whole genome sequence of FRV-1 and FRV64 to help understand the genetic relationships among existing feline rotaviruses from the evolutionary perspective. The genotype constellations of FRV-1 and FRV64 were G3-P[9]-I3-R3-C3-M3-A3-N3-T3-E3-H3 and G3-P[3]-I3-R3-C2-M3-A9-N2-T3-E3-H6, respectively. FRV-1 has a genotype constellation identical to that of the AU-1 strain. Although for individual genes they shared lineages, with the exception of genes encoding VP2, VP6 and VP7, the sequence identity between FRV-1 and AU-1 was considered to be sufficiently high for the AU-1 to be regarded as an example of the direct transmission of a feline rotavirus to a child. On the other hand, the FRV64 strain was not only similar in all the 11 genome segments to another feline rotavirus strain, Cat97, but also to canine rotavirus strains (K9 and CU-1) and feline/canine-like human rotavirus strains (Ro1845 and HCR3A). In conclusion, this study revealed intermingled sharing of genotypes and lineages among feline rotaviruses, suggesting the occurrence of frequent reassortment events over the course of evolution to emerge in four genotype constellations represented by FRV-1, FRV64/Cat97, Cat2 and BA222 strains.

  5. Improvements in Measuring Sorption-Induced Strain and Permeability in Coal

    Energy Technology Data Exchange (ETDEWEB)

    Eric P. Robertson

    2008-10-01

    Total worldwide CBM in-place reserves estimates are between 3500 Tcf and 9500 Tcf. Unminable coal beds have been recommended as good CO2 sequestration sites as the world prepares to sequester large amounts of greenhouse gases. In the U.S., these coal seams have the capacity to adsorb and sequester roughly 50 years of CO2 emissions from all the U.S. coal-fired power plants at today’s output rates. The amount and type of gas ad-sorbed in coal has a strong impact on the permeability of the coal seam. An improved mixed gas adsorption iso-therm model based on the extended-Langmuir theory is discussed and is applied to mixed gas sorption-induced strain based on pure gas strain data and a parameter accounting for gas-gas interactions that is independent of the coal substrate. Advantages and disadvantages of using freestanding versus constrained samples for sorption-induced strain measurements are also discussed. A permeability equation used to model laboratory was found to be very accurate when sorption-induced strain was small, but less accurate with higher strain gases.

  6. Pipeline Bending Strain Measurement and Compensation Technology Based on Wavelet Neural Network

    Directory of Open Access Journals (Sweden)

    Rui Li

    2016-01-01

    Full Text Available The bending strain of long distance oil and gas pipelines may lead to instability of the pipeline and failure of materials, which seriously deteriorates the transportation security of oil and gas. To locate the position of the bending strain for maintenance, an Inertial Measurement Unit (IMU is usually adopted in a Pipeline Inspection Gauge (PIG. The attitude data of the IMU is usually acquired to calculate the bending strain in the pipe. However, because of the vibrations in the pipeline and other system noises, the resulting bending strain calculations may be incorrect. To improve the measurement precision, a method, based on wavelet neural network, was proposed. To test the proposed method experimentally, a PIG with the proposed method is used to detect a straight pipeline. It can be obtained that the proposed method has a better repeatability and convergence than the original method. Furthermore, the new method is more accurate than the original method and the accuracy of bending strain is raised by about 23% compared to original method. This paper provides a novel method for precisely inspecting bending strain of long distance oil and gas pipelines and lays a foundation for improving the precision of inspection of bending strain of long distance oil and gas pipelines.

  7. Changes of nerve growth factor and M3 subtype muscarinic receptor in the seminal vesicle of diabetic rats%糖尿病大鼠精囊组织中神经生长因子和胆碱能M3受体的变化

    Institute of Scientific and Technical Information of China (English)

    陈海娥; 肖敦振

    2011-01-01

    Objective; To investigate the effect of diabetic autonomic neuropathy on the seminal vesicle and search for the theoretical evidence for the prevention and treatment of diabetic infertility by observing changes in the contents of the nerve growth factor (NGF) and muscarinic M3 receptor in the seminal vesicle of diabetic rats. Methods-. Diabetic models were established in 10 of the 15 male adult SD rats by intraperitoneal injection of streptozotocin ( STZ) , and the other 5 were included in a normal control group. Eight weeks after modeling, seminal vesicles were collected from the rats for HE and immunohistochemicl staining. Results: Compared with the normal controls, the diabetic models showed a decreased number of smooth muscle cells, thinner cytoplasm of glandular epithelial cells and disordered structure in the seminal vesicle. The intensity of NCF-positive staining was significantly enhanced, but that of M3 markedly reduced in the diabetic group. There were statistically significant differences in the mean integrated optical density ( L4 ) of muscarinic M3 receptors and NCF between the control and diabetic groups (0.018 7 ± 0.002 4 tu 0.010 0 ± 0.001 5 and 0. 020 9 ±0.008 5 vs 0.041 2 ±0.011 7, P<0.01). Conclusion: The changes in the expressions of NGF and M3 receptors in the seminal vesicle of diabetic rats suggest that diabetes mellitus may induce autonomic neuropathy of the seminal vesicle. Natt J Androl,2011, 17 (11): 1002-1006%目的:观察糖尿病大鼠精囊组织中神经生长因子(NGF)和胆碱能毒蕈碱M3受体含量的变化,以探讨糖尿病自主神经病变对精囊的影响,为糖尿病不育的临床防治提供理论依据.方法:成年雄性普通级SD大鼠15只,随机分为正常对照组5只和糖尿病模型组10只.链脲佐菌素(STZ)制备糖尿病模型成功后饲养8周,取精囊组织进行苏木精-伊红(HE)染色和免疫组化染色.结果:与正常对照组相比,糖尿病模型组HE染色可见大鼠精囊平滑肌

  8. Effects of Gas Pressure on the Failure Characteristics of Coal

    Science.gov (United States)

    Xie, Guangxiang; Yin, Zhiqiang; Wang, Lei; Hu, Zuxiang; Zhu, Chuanqi

    2017-07-01

    Several experiments were conducted using self-developed equipment for visual gas-solid coupling mechanics. The raw coal specimens were stored in a container filled with gas (99% CH4) under different initial gas pressure conditions (0.0, 0.5, 1.0, and 1.5 MPa) for 24 h prior to testing. Then, the specimens were tested in a rock-testing machine, and the mechanical properties, surface deformation and failure modes were recorded using strain gauges, an acoustic emission (AE) system and a camera. An analysis of the fractals of fragments and dissipated energy was performed to understand the changes observed in the stress-strain and crack propagation behaviour of the gas-containing coal specimens. The results demonstrate that increased gas pressure leads to a reduction in the uniaxial compression strength (UCS) of gas-containing coal and the critical dilatancy stress. The AE, surface deformation and fractal analysis results show that the failure mode changes during the gas state. Interestingly, a higher initial gas pressure will cause the damaged cracks and failure of the gas-containing coal samples to become severe. The dissipated energy characteristic in the failure process of a gas-containing coal sample is analysed using a combination of fractal theory and energy principles. Using the theory of fracture mechanics, based on theoretical analyses and calculations, the stress intensity factor of crack tips increases as the gas pressure increases, which is the main cause of the reduction in the UCS and critical dilatancy stress and explains the influence of gas in coal failure. More serious failure is created in gas-containing coal under a high gas pressure and low exterior load.

  9. A strain gauge

    DEFF Research Database (Denmark)

    2017-01-01

    The invention relates to a strain gauge of a carrier layer and a meandering measurement grid (101) positioned on the carrier layer, wherein the measurement grid comprises a number of measurement grid sections placed side by side with gaps in between, and a number of end loops (106) interconnecting...... the measurement grid sections at their ends. The end loops at both ends of the measurement grid extend a length (L, 500) in the axial direction in millimetres of a factor times a ratio between a width of a grid section and the gap distance, wherein the factor is larger or equal to 1.5. The invention further...

  10. Data Acquisition of Air Blowing Mehtod for Ship's Liquid Level Detection Device Based on Cortex-M3 microcontrollers%基于Cortex-M3微控制器船舶吹气液位检测装置的数据采集

    Institute of Scientific and Technical Information of China (English)

    王永祥; 陈国民

    2010-01-01

    本文详细介绍了船舶吹气法液位检测的原理,着重叙述基于Cortex-M3微控制器过采样技术的实现方法,同时给出相应的设计软件,实验结果表明采样数据稳定可靠,精度提高2位.

  11. Cardioprotective Effect and Its Mechanism of Exercise Training Up-Regulating the Expression of M3 Receptor on Myocardial Infarction in Rats%运动锻炼上调 M3 R对 MI大鼠心脏产生保护效应及其机制探讨

    Institute of Scientific and Technical Information of China (English)

    田振军; 张可; 陈婷

    2015-01-01

    objective :Cardioprotective effect and mechanism of exercise training up-regulating the expression of M3 receptor on myocardial infarction .Methods :48 male Sprague-Dawley rats were randomly assigned to four groups (n=12 ,per group):control group (C) ,myocardial in-farction group (MI ) ,moderate-intensity aerobic exercise with myocardial infarction group (ME1) and high-intensity aerobic interval exercise with myocardial infarction group (ME2) , Rats in C group are breed normally .MI was induced by ligation of the left anterior descending (LAD) coronary artery in MI group .Rats in ME1 and ME2 group take treadmill exercise for 8wk after 1wk post-operation .ME1 group running began at the speed of 10m/min for 5min , then accelerate from 3m/min to 16m/min .ME2 group running began at the speed of 10m/min for 10min ,then the speed increases to 25 m/min ,after 7min ,slow down at the speed of 15m/min for 3min .Take the process alternatively .The total exercise time of ME1 and ME2 are both 60min ,5d/1wk × 8wk .LVSP ,LVEDP ,± dp/dtmax and the cardiac function changes are measured after training .Myocardial collagen fibers were observed by histological section and Masson staining .The expression of myocardial M3 R was observed and analyzed by immun-oflourecence .The myocardial protein content of M3 R ,MEK1/2 ,P-ERK1/2 ,ERK1/2 and apoptosis related Bcl-2 and Bax were assayed by Western Blot .Results :MI increased CVF and LV-EDP (P< 0 .01) ,but decreased LVSP and -dp/dtmax (P<0 .01) .After MI myocardial M3 positive staining ,after MI M3 protein expression significantly higher (P< 0 .01) ,MEK1/2 ,P-ERK1/2/ERK1/2 protein expression were significantly increased ( P< 0 .01 ,P< 0 .01 ) ,after the MI the Bcl-2/Bax expression significantly reduced ( P< 0 .01 ) .ME1 and ME2 group CVF% ,LVEDP significantly reduced (P<0 .01) ,ME1-dp/dtmax significantly increased (P<0 .01) ,ME2 LVSP increased significantly (P< 0 .01) .ME1 and ME2 groups were identified myocardial M3 ,ME

  12. Production and emission of phosphine gas from wetland ecosystems.

    Science.gov (United States)

    Han, Chao; Gu, Xueyuan; Geng, Jinju; Hong, Yuning; Zhang, Rui; Wang, Xiaorong; Gao, Shixiang

    2010-01-01

    Phosphine is a part of an atmospheric link of phosphorus cycle on earth, which could be an important pathway for phosphorus transport in environment. Wetland ecosystems are important locations for global biogeochemical phosphorus cycle. In this study, production and emission fluxes of free phosphine from four wetlands types in southern China were observed in different seasons. The results showed that the concentration of phosphine liberated from wetlands was at pg/m3-ng/m3 level. The emission concentrations of different wetlands followed the sequence: paddy field (51.83 +/- 3.06) ng/m3 > or = marsh (46.54 +/- 20.55) ng/m3 > lake (37.05 +/- 22.74) ng/m3 > coastal wetland (1.71 +/- 0.73) ng/m3, the positive phosphine emission flux occurred in rice paddy field (6.67 +/- 5.18) ng/(m2 x hr) and marsh (6.23 +/- 26.9) ng/(m2 x hr), while a negative phosphine flux of (-13.11 +/- 35.04) ng/(m2 x hr) was observed on the water-air interface of Lake Taihu, suggesting that paddy field and marsh may be important sources for phosphine gas in atmosphere, while lake may be a sink of atmospheric phosphine gas during the sampling period. Atmospheric phosphine levels and emission flux from Yancheng marsh and rice paddy field varied in different seasons and vegetational zones. Both diffusion resistance in aqueous phase and temperature were dominating factors for the production and transportation of phosphine to atmosphere.

  13. Compressed gas manifold

    Science.gov (United States)

    Hildebrand, Richard J.; Wozniak, John J.

    2001-01-01

    A compressed gas storage cell interconnecting manifold including a thermally activated pressure relief device, a manual safety shut-off valve, and a port for connecting the compressed gas storage cells to a motor vehicle power source and to a refueling adapter. The manifold is mechanically and pneumatically connected to a compressed gas storage cell by a bolt including a gas passage therein.

  14. Sadovskii vortex in strain

    Science.gov (United States)

    Freilich, Daniel; Llewellyn Smith, Stefan

    2014-11-01

    A Sadovskii vortex is a patch of fluid with uniform vorticity surrounded by a vortex sheet. Using a boundary element type method, we investigate the steady states of this flow in an incompressible, inviscid straining flow. Outside the vortex, the fluid is irrotational. In the limiting case where the entire circulation is due to the vortex patch, this is a patch vortex (Moore & Saffman, Aircraft wake turbulence and its detection 1971). In the other limiting case, where all the circulation is due to the vortex sheet, this is a hollow vortex (Llewellyn Smith and Crowdy, J. Fluid Mech. 691, 2012). This flow has two governing nondimensional parameters, relating the strengths of the straining field, vortex sheet, and patch vorticity. We study the relationship between these two parameters, and examine the shape of the resulting vortices. We also work towards a bifurcation diagram of the steady states of the Sadovskii vortex in an attempt to understand the connection between vortex sheet and vortex patch desingularizations of the point vortex. Support from NSF-CMMI-0970113.

  15. Chemical absorption process for degradation of VOC gas using heterogeneous gas-liquid photocatalytic oxidation: toluene degradation by photo-Fenton reaction.

    Science.gov (United States)

    Tokumura, Masahiro; Nakajima, Rina; Znad, Hussein Tawfeek; Kawase, Yoshinori

    2008-10-01

    A novel process for degradation of toluene in the gas-phase using heterogeneous gas-liquid photocatalytic oxidation has been developed. The degradation of toluene gas by photo-Fenton reaction in the liquid-phase has experimentally examined. The photo-Fenton reaction in the liquid-phase could improve the overall toluene absorption rate by increasing the driving force for mass transfer and as a result enhance the removal of toluene in the exhaust gas. The toluene concentrations in the inlet gas were varied in the range from 0.0968 to 8.69 g m(-3) with initial hydrogen peroxide concentration of 400 mg l(-1) and Fe dose of 5.0 mg l(-1). It was found that toluene in the inlet gas was almost completely dissolved into water and degraded in the liquid-phase for the inlet toluene gas concentration of less than 0.42 g m(-3). The dynamic process of toluene gas degradation by the photo-Fenton reaction providing information for reaction kinetics and mass transfer rate was examined. Toluene removal kinetic analysis indicated that photo-Fenton degradation was significantly affected by H(2)O(2) concentration. The experimental results were satisfactorily described by the predictions simulated using the simplified tanks-in-series model combined with toluene removal kinetic analysis. The present results showed that the proposed chemical absorption process using the photo-Fenton heterogeneous gas-liquid photocatalytic oxidation is very effective for degradation of volatile organic gases.

  16. Isolation of a novel alginate lyase-producing Bacillus litoralis strain and its potential to ferment Sargassum horneri for biofertilizer.

    Science.gov (United States)

    Wang, Mingpeng; Chen, Lei; Liu, Zhengyi; Zhang, Zhaojie; Qin, Song; Yan, Peisheng

    2016-12-01

    Algae have long been used to augment plant productivity through their beneficial effects. Alginate oligosaccharide is believed to be one of the important components to enhance growth and crop yield. In this study, we isolated and characterized a Bacillus litoralis strain, named Bacillus M3, from decayed kelps. We further demonstrated that the M3 strain could secrete alginate lyase to degrade alginate. The crude enzyme exhibited the highest activity (33.74 U/mg) at pH 7.0 and 50°C. The M3 strain was also able to ferment the brown alga Sargassum horneri. Fermentation results revealed that a fermentation period of 8-12 hr was the best harvest time with the highest level of alginate oligosaccharides. Plant growth assay showed that the seaweed fermentation extract had an obvious promotion effect on root and seedling growth of Lycopersicon eseulentum L. Our results suggest that fermentation extract of Sargassum horneri by the novel strain of Bacillus litoralis M3 has significant development potential for biofertilizer production and agriculture application. © 2016 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

  17. Double CEBPA mutations are prognostically favorable in non-M3 acute myeloid leukemia patients with wild-type NPM1 and FLT3-ITD.

    Science.gov (United States)

    Wen, Xiang-Mei; Lin, Jiang; Yang, Jing; Yao, Dong-Ming; Deng, Zhao-Qun; Tang, Chun-Yan; Xiao, Gao-Fei; Yang, Lei; Ma, Ji-Chun; Hu, Jia-Bo; Qian, Wei; Qian, Jun

    2014-01-01

    This study is aimed to investigate the pattern of CEBPA mutations and its clinical significance in Chinese non-M3 acute myeloid leukemia (AML) patients. The entire coding region of CEBPA gene was amplified by PCR and then sequenced in samples from 233 non-M3 AML patients. Fifty mutations were identified in 37 (15.8%) patients with eleven (4.7%) double mutated CEBPA (dmCEBPA) and twenty-six (11.1%) single mutated CEBPA (smCEBPA). dmCEBPA was exclusively observed in M1 and M2 subtypes of FAB classification (P = 0.008), whereas smCEBPA occurred in almost all subtypes (P = 0.401). Patients with dmCEBPA had significantly younger age and higher WBC counts than those with wtCEBPA (P = 0.016 and 0.043, respectively). Both dmCEBPA and smCEBPA were mainly present in cytogenetically normal patients. Patients with dmCEBPA achieved higher rate of complete (CR) than wtCEBPA patients (88% vs. 51%, P = 0.037), whereas smCEBPA and wtCEBPA groups are similar (47% vs. 51%, P = 0.810). Patients with dmCEBPA had a superior overall survival (OS) compared with patients with wtCEBPA (P = 0.033), whereas patients with smCEBPA had a similar OS as patients with wtCEBPA (P = 0.976). dmCEBPA but not smCEBPA was also associated with favorable outcome in patients with wild-type NPM1 and FLT3-ITD (NPM1(wt)FLT3-ITD(wt) ). Our data confirm that dmCEBPA but not smCEBPA is prognostically favorable in NPM1(wt)FLT3-ITD(wt) AML, and suggest that the entity AML with mutated CEBPA should be definitely designated as AML with dmCEBPA in WHO classification and smCEBPA should be excluded from the favorable risk of molecular abnormalities.

  18. A study of the properties of chlorine dioxide gas as a fumigant.

    Science.gov (United States)

    Shirasaki, Yasufumi; Matsuura, Ayumi; Uekusa, Masashi; Ito, Yoshihiro; Hayashi, Toshiaki

    2016-07-29

    Chlorine dioxide (ClO2) is a strong oxidant that possesses an antimicrobial activity. We demonstrated here that ClO2 gas is easily generated by mixing 3.35% sodium chlorite solution (Purogene) and 85% phosphoric acid at a 10:1 volume ratio without using an expensive machine. In a test room (87 m(3)), experiments were carried out using various amounts of sodium chlorite solution (0.25 ml/m(3) to 20.0 ml/m(3)). The gas concentration increased in a sodium chlorite volume-dependent manner and reached peak values of from 0.8 ppm to 40.8 ppm at 2 h-3 h, and then gradually decreased. No differences in gas concentrations were observed between 0.1 and 2.5 m above the floor, indicating that the gas was evenly distributed. Under high-humidity (approximately 80% relative humidity), colony formation of both Staphylococcus aureus and Escherichia coli was completely inhibited by ClO2 gas exposure at 1.0 ml/m(3) sodium chlorite solution (mean maximal concentration of 3.0 ppm). Exposure at 4.0 ml/m(3) sodium chlorite solution (mean maximal concentration of 10.6 ppm) achieved complete inactivation of Bacillus atrophaeus spores. In contrast, without humidification, the efficacy of ClO2 gas was apparently attenuated, suggesting that the atmospheric moisture is indispensable. Delicate electronic devices (computer, camera, etc.) operated normally, even after being subjected to more than 20 times of fumigation. Considering that our method for gas generation is simple, reproducible, and highly effective at decontaminating microbes, our approach is expected to serve as an inexpensive alternative method for cleaning and disinfecting animal facilities.

  19. Echocardiographic assessment of myocardial strain.

    Science.gov (United States)

    Gorcsan, John; Tanaka, Hidekazu

    2011-09-27

    Echocardiographic strain imaging, also known as deformation imaging, has been developed as a means to objectively quantify regional myocardial function. First introduced as post-processing of tissue Doppler imaging velocity converted to strain and strain rate, strain imaging has more recently also been derived from digital speckle tracking analysis. Strain imaging has been used to gain greater understanding into the pathophysiology of cardiac ischemia and infarction, primary diseases of the myocardium, and the effects of valvular disease on myocardial function, and to advance our understanding of diastolic function. Strain imaging has also been used to quantify abnormalities in the timing of mechanical activation for heart failure patients undergoing cardiac resynchronization pacing therapy. Further advances, such as 3-dimensional speckle tracking strain imaging, have emerged to provide even greater insight. Strain imaging has become established as a robust research tool and has great potential to play many roles in routine clinical practice to advance the care of the cardiovascular patient. This perspective reviews the physiology of myocardial strain, the technical features of strain imaging using tissue Doppler imaging and speckle tracking, their strengths and weaknesses, and the state-of-the-art present and potential future clinical applications.

  20. Colony Dimorphism in Bradyrhizobium Strains

    Science.gov (United States)

    Sylvester-Bradley, Rosemary; Thornton, Philip; Jones, Peter

    1988-01-01

    Ten isolates of Bradyrhizobium spp. which form two colony types were studied; the isolates originated from a range of legume species. The two colony types differed in the amount of gum formed or size or both, depending on the strain. Whole 7-day-old colonies of each type were subcultured to determine the proportion of cells which had changed to the other type. An iterative computerized procedure was used to determine the rate of switching per generation between the two types and to predict proportions reached at equilibrium for each strain. The predicted proportions of the wetter (more gummy) or larger colony type at equilibrium differed significantly between strains, ranging from 0.9999 (strain CIAT 2383) to 0.0216 (strain CIAT 2469), because some strains switched faster from dry to wet (or small to large) and others switched faster from wet to dry (or large to small). Predicted equilibrium was reached after about 140 generations in strain USDA 76. In all but one strain (CIAT 3030) the growth rate of the wetter colony type was greater than or similar to that of the drier type. The mean difference in generation time between the two colony types was 0.37 h. Doubling times calculated for either colony type after 7 days of growth on the agar surface ranged from 6.0 to 7.3 h. The formation of two persistent colony types by one strain (clonal or colony dimorphism) may be a common phenomenon among Bradyrhizobium strains. Images PMID:16347599

  1. Exploring the Saccharomyces cerevisiae Volatile Metabolome: Indigenous versus Commercial Strains.

    Directory of Open Access Journals (Sweden)

    Zélia Alves

    Full Text Available Winemaking is a highly industrialized process and a number of commercial Saccharomyces cerevisiae strains are used around the world, neglecting the diversity of native yeast strains that are responsible for the production of wines peculiar flavours. The aim of this study was to in-depth establish the S. cerevisiae volatile metabolome and to assess inter-strains variability. To fulfill this objective, two indigenous strains (BT2652 and BT2453 isolated from spontaneous fermentation of grapes collected in Bairrada Appellation, Portugal and two commercial strains (CSc1 and CSc2 S. cerevisiae were analysed using a methodology based on advanced multidimensional gas chromatography (HS-SPME/GC×GC-ToFMS tandem with multivariate analysis. A total of 257 volatile metabolites were identified, distributed over the chemical families of acetals, acids, alcohols, aldehydes, ketones, terpenic compounds, esters, ethers, furan-type compounds, hydrocarbons, pyrans, pyrazines and S-compounds. Some of these families are related with metabolic pathways of amino acid, carbohydrate and fatty acid metabolism as well as mono and sesquiterpenic biosynthesis. Principal Component Analysis (PCA was used with a dataset comprising all variables (257 volatile components, and a distinction was observed between commercial and indigenous strains, which suggests inter-strains variability. In a second step, a subset containing esters and terpenic compounds (C10 and C15, metabolites of particular relevance to wine aroma, was also analysed using PCA. The terpenic and ester profiles express the strains variability and their potential contribution to the wine aromas, specially the BT2453, which produced the higher terpenic content. This research contributes to understand the metabolic diversity of indigenous wine microflora versus commercial strains and achieved knowledge that may be further exploited to produce wines with peculiar aroma properties.

  2. Bio Gas Oil Production from Waste Lard

    Directory of Open Access Journals (Sweden)

    Jenő Hancsók

    2011-01-01

    Full Text Available Besides the second generations bio fuels, one of the most promising products is the bio gas oil, which is a high iso-paraffin containing fuel, which could be produced by the catalytic hydrogenation of different triglycerides. To broaden the feedstock of the bio gas oil the catalytic hydrogenation of waste lard over sulphided NiMo/Al2O3 catalyst, and as the second step, the isomerization of the produced normal paraffin rich mixture (intermediate product over Pt/SAPO-11 catalyst was investigated. It was found that both the hydrogenation and the decarboxylation/decarbonylation oxygen removing reactions took place but their ratio depended on the process parameters (T = 280–380∘C, P = 20–80 bar, LHSV = 0.75–3.0 h−1 and H2/lard ratio: 600 Nm3/m3. In case of the isomerization at the favourable process parameters (T = 360–370∘C, P = 40 –50 bar, LHSV = 1.0 h−1 and H2/hydrocarbon ratio: 400 Nm3/m3 mainly mono-branching isoparaffins were obtained. The obtained products are excellent Diesel fuel blending components, which are practically free of heteroatoms.

  3. Detection of Mg spinel lithologies on central peak of crater Theophilus using Moon Mineralogy Mapper (M3) data from Chandrayaan-1

    Indian Academy of Sciences (India)

    D Lal; P Chauhan; R D Shah; S Bhattacharya; Ajai; A S Kiran Kumar

    2012-06-01

    Spectral reflectance data derived from Moon Mineralogy Mapper (M3) onboard India’s Chandrayaan-1 has revealed Fe bearing Mg-spinel-rich lithology on central peaks of the crater Theophilus. These newly identified Fe bearing Mg-spinel-rich rock types are defined by their strong 2-m absorption and lack of 1-m absorptions in spectral reflectance response. Such lithology has been reported previously along the inner ring of Moscoviense Basin on the lunar far side. The Modified Gaussian Modeling (MGM) analysis of the Fe bearing Mg-spinel reflectance spectra has been done and the results of the analysis clearly bring out a strong spectral absorption at 1872 nm with no significant absortion around 1000 nm. The presence of spinel group of minerals in the Theophilus central peak and the fact that central peaks mostly represent uplifted mass of deep crustal material confirm that central peaks can be used as a window to study the deep crustal and/or upper mantle composition and may lead to a fresh perspective about the crustal composition of Moon.

  4. Mainstream partial nitritation and anammox in a 200,000 m3/day activated sludge process in Singapore: scale-down by using laboratory fed-batch reactor.

    Science.gov (United States)

    Yeshi, Cao; Hong, Kwok Bee; van Loosdrecht, Mark C M; Daigger, Glen T; Yi, Png Hui; Wah, Yuen Long; Chye, Chua Seng; Ghani, Yahya Abd

    2016-01-01

    A laboratory fed-batch reactor has been used to study under controlled conditions the performance of partial nitritation/anammox for the 200,000 m(3)/day step-feed activated sludge process at the Changi Water Reclamation Plant, Singapore. The similarity of the concentrations of NH(4), NO(2), NO(3), PO(4), suspended chemical oxygen demand (sCOD), pH, and alkalinity (ALK) between the on-site process and laboratory reactor illustrates that the laboratory fed-batch reactor can be used to simulate the site performance. The performance of the reactor fed by primary effluent illustrated the existence of anammox and heterotrophic denitrification and apparent excessive biological phosphorus removal as observed from the site. The performance of the reactor fed by final effluent proved the presence of anammox process on site. Both the laboratory reactor and on-site process showed that higher influent 5-day biochemical oxygen demand/total nitrogen (BOD(5)/TN) (COD/TN) ratio increases the nitrogen removal efficiency of the process.

  5. Determination of attitude motion of the Foton M-3 satellite according to the data of onboard measurements of the Earth's magnetic field

    Science.gov (United States)

    Beuselinck, T.; van Bavinchove, C.; Abrashkin, V. I.; Kazakova, A. E.; Sazonov, V. V.

    2010-06-01

    The results of reconstruction of rotational motion of the Foton M-3 satellite during its uncontrolled flight in September 2007 are presented. The reconstruction was performed by processing the data of onboard measurements of the Earth’s magnetic field obtained by the DIMAC instruments. The measurements were carried out continuously throughout the flight, but the processing technique dealt with the data portions covering time intervals of a few orbital revolutions. The data obtained on each such interval were processed jointly by the least squares method with using integration of the equations of satellite motion relative to its center of mass. When processing, the initial conditions of motion and the used mathematical model’s parameters were estimated. The results of processing 16 data sets gave us complete information about the satellite motion. This motion, which began at a low angular velocity, had gradually accelerated and in five days became close to the regular Euler precession of an axisymmetric solid body. At the end of uncontrolled flight the angular velocity of the satellite relative to its lengthwise axis was 0.5 deg/s; the angular velocity projection onto the plane perpendicular to this axis had a magnitude of about 0.18 deg/s.

  6. The influence of polymorphisms of glutathione S-transferases M1 and M3 on the development of human urothelial cancer.

    Science.gov (United States)

    Golka, Klaus; Schmidt, Tobias; Seidel, Thilo; Dietrich, Holger; Roemer, Hermann C; Lohlein, Dietrich; Reckwitz, Thomas; Sokeland, Jurgen; Weistenhofer, Wobbeke; Blaszkewicz, Meinolf; Selinski, Silvia

    2008-01-01

    Cigarette smoking is the most important risk factor for development of transitional cell carcinoma of the urinary bladder. The effect of polymorphisms of glutathione S-transferases M1 (GSTM1) and M3 (GSTM3) on the influence of cigarette smoking on urinary bladder carcinogenesis was investigated. In total, 293 bladder cancer patients from hospitals in Dortmund and Wittenberg as well as 176 patients without any malignancy from a Department of Surgery from Dortmund were genotyped for GSTM1 and GSTM3 according to standard PCR/RFLP methods. Smoking habits were quantified by a standardized interview. The proportion of GSTM1 negative cases was 63% in the entire bladder cancer cases group compared to 50% in controls. The GSTM3*A/*A genotype was 76% in cancer cases versus 74% in controls. Smokers and ex-smokers were overrepresented in bladder cancer cases. A significant association between smoking status and GSTM1 or GSTM3 genotype was not detected. The elevated proportion of GSTM1 negative bladder cancer cases shows an effect of this polymorphic enzyme on development of bladder cancer. In contrast to other studies, an influence of GSTM1 on the risk due to cigarette smoking was not observed.

  7. Effects of the A-site cation number on the properties of Ln5/8M3/8MnO 3 manganites

    Science.gov (United States)

    Collado, J. A.; García-Muñoz, J. L.; Aranda, M. A. G.

    2010-05-01

    The properties of manganites can be tuned by changing the doping level x in Ln1-xM xMnO 3. A second mechanism allows tuning of magnetic and electronic properties, for fixed x values, by varying the average A-cation radius, . Moreover, for fixed x and values, the changes in the A-cation size variance, σ2, also modify the ferromagnetic and metal-insulator transition temperatures. Here, we investigate the influence of the number of A-site cations on Ln5/8M3/8MnO 3 manganites, where x, and σ2 values are kept constant, and in the absence of phase separation phenomena. We have found that the number of cation species at the A site ( N A) has a strong influence on the width of the ferromagnetic and metal-insulator transitions, and a small influence on the average transition temperature. This behavior is opposite to that observed for increasing values of the variance σ2 in manganites, with the same x and values, where average transition temperatures are strongly reduced.

  8. Manufacturing of Injection-Molded NdFeB Magnet with (BH)max111 kJ · m-3

    Institute of Scientific and Technical Information of China (English)

    Duan Bohua; Qu Xuanhui; Xu Zhengzhou; Guo Shibo; Qin Mingli

    2004-01-01

    The bonded NdFeB magnets prepared by injection molding meet with the development tendency of the magnet in small volume, light weight and high performance ,and have a good prospect.In this paper, a modified nylonbased binder was developed for powder injection molding of NdFeB bonded magnets.The effects of pretreatment of NdFeB anisotropic magnetic powder produced with HDDR processing on the anti-oxidation behaviors of powder and the final magnetic properties of the molded bonded magnets were studied.The optimal powder loading of 65 vol% was achieved with the modified binder.It was found that the properties of the bonded magnets were mainly affected by the powder surface pretreatment and the intensity of the applied alignment magnetic field during injection molding for a certain powder.Bonded magnets with remanence of 0.820 T, intrinsic coercivity of 1140.3 kA· m-1 and maximum energy product of 111 kJ · m-3 were produced with the optimal processing.

  9. Arecoline excites the contraction of distal colonic smooth muscle strips in rats via the M3 receptor-extracellular Ca2+ influx - Ca2+ store release pathway.

    Science.gov (United States)

    Li, Chuan-Bao; Yang, Xiao; Tang, Wen-Bo; Liu, Chuan-Yong; Xie, Dong-Ping

    2010-04-01

    Areca is a Chinese herbal medicine that is widely used for constipation. However the mechanisms of its action are not clear. We investigated the effects of arecoline, the most active component of areca, on the motility of rat distal colonic smooth muscle strips. In longitudinal muscle of distal colon (LMDC) and circular muscle of distal colon (CMDC), arecoline increased the contraction in a dose-dependent manner. Tetrodotoxin (TTX) did not inhibit the effects of arecoline. The contractile response to arecoline was completely antagonized by atropine. 4-Diphenylacetoxy-N-methylpiperidine methiodide (4-DAMP) strongly depressed the response to arecoline, but gallamine and methoctramine did not. Nifedipine, 2-aminoethoxydiphenyl borate (2-APB), and Ca2+-free Krebs solution with EGTA partly inhibited the effects of arecoline. The sum of Ca2+-free Krebs solution, EGTA, and 2-APB completely inhibited the effects of arecoline. The results show that arecoline stimulates distal colonic contraction in rats via the muscarinic (M3) receptor - extracellular Ca2+ influx - Ca2+ store release pathway. It is likely that the action of areca in relieving constipation is due to its stimulation of muscle contraction.

  10. M3D-C1 simulations of the plasma response to n = 3 magnetic perturbations applied to the NSTX-U snowflake divertor

    Science.gov (United States)

    Canal, G. P.; Ferraro, N. M.; Evans, T. E.; Osborne, T. H.; Menard, J. E.; Ahn, J.-W.; Maingi, R.; Wingen, A.; Ciro, D.; Frerichs, H.; Schmitz, O.; Soukhanoviskii, V.; Waters, I.

    2016-10-01

    Single- and two-fluid resistive magnetohydrodynamic simulations, performed with the code M3D-C1, are used to investigate the effect of n = 3 magnetic perturbations on the SF divertor configuration. The calculations are based on simulated NSTX-U plasmas and the results show that additional and longer magnetic lobes are created in the null-point region of the SF configuration, compared to those in the conventional single-null. The intersection of these additional and longer lobes with the divertor plates are expected to cause more striations in the particle and heat flux target profiles. In addition, the results indicate that the size of the magnetic lobes, in both single-null and SF configurations, are more sensitive to resonant than to non-resonant magnetic perturbations. The results also suggest that lower values of current in non-axisymmetric control coils close enough to the primary x-point would be required to suppress edge localized modes in plasmas with the SF configuration. This work has been supported by the US Department of Energy, Office of Science, Office of Fusion Energy Science under DOE Award DE-SC0012706.

  11. Suggestions on the development strategy of shale gas in China

    Directory of Open Access Journals (Sweden)

    Dazhong Dong

    2016-12-01

    Full Text Available From the aspects of shale gas resource condition, main exploration and development progress, important breakthrough in key technologies and equipment, this paper systematically summarized and analyzed current situation of shale gas development in China and pointed out five big challenges such as misunderstandings, lower implementation degree and higher economic uncertainty of shale gas resource, and still no breakthrough in exploration and development core technologies and equipment for shale gas buried depth more than 3500 m, higher cost and other non-technical factors that restrict the development pace. Aiming at the above challenges, we put forward five suggestions to promote the shale gas development in China: (1 Make strategies and set goals according to our national conditions and exploration and development stages. That is, make sure to realize shale gas annual production of 20 × 109 m3, and strives to reach 30 × 109 m3. (2 Attach importance to the research of accumulation and enrichment geological theory and exploration & development key engineering technologies for lower production and lower pressure marine shale gas reservoir, and at the same time orderly promote the construction of non-marine shale gas exploration & development demonstration areas. (3 The government should introduce further policies and set special innovation funds to support the companies to carry out research and development of related technologies and equipment, especially to strengthen the research and development of technology, equipment and process for shale gas bellow 3500 m in order to achieve breakthrough in deep shale gas. (4 Continue to promote the geological theory, innovation in technology and management, and strengthen cost control on drilling, fracturing and the whole process in order to realize efficient, economic and scale development of China's shale gas. (5 Reform the mining rights management system, establish information platform of shale

  12. Strain Pattern in Supercooled Liquids

    Science.gov (United States)

    Illing, Bernd; Fritschi, Sebastian; Hajnal, David; Klix, Christian; Keim, Peter; Fuchs, Matthias

    2016-11-01

    Investigations of strain correlations at the glass transition reveal unexpected phenomena. The shear strain fluctuations show an Eshelby-strain pattern [˜cos (4 θ ) /r2 ], characteristic of elastic response, even in liquids, at long times. We address this using a mode-coupling theory for the strain fluctuations in supercooled liquids and data from both video microscopy of a two-dimensional colloidal glass former and simulations of Brownian hard disks. We show that the long-ranged and long-lived strain signatures follow a scaling law valid close to the glass transition. For large enough viscosities, the Eshelby-strain pattern is visible even on time scales longer than the structural relaxation time τ and after the shear modulus has relaxed to zero.

  13. Radon emissions from natural gas power plants at The Pennsylvania State University.

    Science.gov (United States)

    Stidworthy, Alison G; Davis, Kenneth J; Leavey, Jeff

    2016-11-01

    Burning natural gas in power plants may emit radon ((222)Rn) into the atmosphere. On the University Park campus of The Pennsylvania State University, atmospheric radon enhancements were measured and modeled in the vicinity of their two power plants. The three-part study first involved measuring ambient outdoor radon concentrations from August 2014 through January 2015 at four sites upwind and downwind of the power plants at distances ranging from 80 m to 310 m. For each plant, one site served as a background site, while three other sites measured radon concentration enhancements downwind. Second, the radon content of natural gas flowing into the power plant was measured, and third, a plume dispersion model was used to predict the radon concentrations downwind of the power plants. These predictions are compared to the measured downwind enhancements in radon to determine whether the observed radon concentration enhancements could be attributed to the power plants' emissions. Atmospheric radon concentrations were consistently low as compared to the EPA action level of 148 Bq m(-3), averaging 34.5 ± 2.7 Bq m(-3) around the East Campus Steam Plant (ECSP) and 31.6 ± 2.7 Bq m(-3) around the West Campus Steam Plant (WCSP). Significant concentrations of radon, ranging from 516 to 1,240 Bq m(-3), were detected in the natural gas. The measured enhancements downwind of the ECSP averaged 6.2 Bq m(-3) compared to modeled enhancements of 0.08 Bq m(-3). Measured enhancements around the WCSP averaged -0.2 Bq m(-3) compared to the modeled enhancements of 0.05 Bq m(-3), which were not significant compared to observational error. The comparison of the measured to modeled downwind radon enhancements shows no correlation over time. The measurements of radon levels in the vicinity of the power plants appear to be unaffected by the emissions from the power plants. Radon measurements at sites surrounding power plants that utilize natural gas did not indicate that the radon concentrations

  14. High Expression, Purification and Characterization of cDNA Encoding M3-M4 Loop in the Essential Subuint of hNMDA Receptor%人NMDA受体主亚基M3-M4环基因片段的高效表达、纯化与鉴定

    Institute of Scientific and Technical Information of China (English)

    张玉梅; 孙长凯; 范明; 李伍举; 刘淑红; 赵杰; 韩大跃; 王嘉玺

    2003-01-01

    用基因工程方法获得人N-甲基-D-天冬氨酸(N-methyl-D-aspartate,NMDA)受体主亚基M3-M4环靶片段,以此为免疫原,用于进一步免疫原性及相关应用研究. 自人脑胶质瘤组织中提取总RNA, 采用RT-PCR扩增出人NMDA受体主亚基M3-M4环的基因片段, 并按照计算机辅助原核表达载体pBV220中外源基因高效表达的数学模型预测方法, 将其进行优化改构. 将目的基因克隆到pBV220中,转化大肠杆菌DH5α,升温诱导表达,从蛋白质水平检测重组体在大肠杆菌中的表达情况, 通过制备性SDS-PAGE 进行纯化, 从相对分子质量、免疫反应性、肽质谱指纹分析等方面进行鉴定. 结果表明,成功构建了人NMDA受体主亚基M3-M4环的原核表达载体(命名为pBV-NR1L3),通过基因优化,实现了高效表达.凝胶扫描分析表达量约占菌体总蛋白29 %,重组肽纯度达95 %以上.

  15. Radon in soil gas in Kosovo.

    Science.gov (United States)

    Kikaj, Dafina; Jeran, Zvonka; Bahtijari, Meleq; Stegnar, Peter

    2016-11-01

    An assessment of the radiological situation due to exposure to radon and gamma emitting radionuclides was conducted in southern Kosovo. This study deals with sources of radon in soil gas. A long-term study of radon concentrations in the soil gas was carried out using the SSNTDs (CR-39) at 21 different locations in the Sharr-Korabi zone. The detectors were exposed for an extended period of time, including at least three seasonal periods in a year and the sampling locations were chosen with respect to lithology. In order to determine the concentration of the natural radioactive elements (238)U and (226)Ra, as a precursor of (222)Rn, soil samples were collected from each measuring point from a depth of 0.8 m, and measured by gamma spectrometry. The levels (Bq kg(-1)) of naturally occurring radionuclides and levels (kBq m(-3)) of radon in soil gas obtained at a depth 0.8 m of soil were: 21-53 for (226)Ra, 22-160 for (238)U and 0.295-32 for (222)Rn. With respect to lithology, the highest value for (238)U and (226)Ra were found in limestone and the highest value for (222)Rn was found in metamorphic rocks. In addition, the results showed seasonal variations of the measured soil gas radon concentrations with maximum concentration in the spring months. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Hydrogen production from microbial strains

    Science.gov (United States)

    Harwood, Caroline S; Rey, Federico E

    2012-09-18

    The present invention is directed to a method of screening microbe strains capable of generating hydrogen. This method involves inoculating one or more microbes in a sample containing cell culture medium to form an inoculated culture medium. The inoculated culture medium is then incubated under hydrogen producing conditions. Once incubating causes the inoculated culture medium to produce hydrogen, microbes in the culture medium are identified as candidate microbe strains capable of generating hydrogen. Methods of producing hydrogen using one or more of the microbial strains identified as well as the hydrogen producing strains themselves are also disclosed.

  17. Evaluation of Strain Hardening Parameters

    Institute of Scientific and Technical Information of China (English)

    DING Zong-hai; Pavel Huml; YANG Wei

    2004-01-01

    The plane-strain compression test for three kinds of materials was carried out in a temperature range between room temperature and 400 ℃. The σ - ε curves and strain-hardening rate at different temperatures were simulated and a reasonable fit to the experimental data was obtained. A modified model created by data inference and computer simulation was developed to describe the strain hardening at a large deformation, and the predicted strain hardening are in a good agreement with that observed in a large range of stress. The influences of different parameters on strain hardening behaviour under large deformation were analysed. The temperature increase within the test temperatures for stainless steel 18/8 Ti results in dropping of flow stress and strain-hardening rate. For favourable γ-fibre texture to obtain high r, the cold rolling was applied at large reduction. In the experimental procedure, the X-ray diffraction test was carried out to compare the strain hardening and microstructure under large deformation for a bcc steel (low carbon steel SS-1142). The results indicate that the high strain-hardening rate possibly occurs when the primary slip plane {110} is parallel to the rolling plane and the strain-hardening rate decreases when lots of {110} plane rotate out from the orientation {110}∥RP.

  18. Hydrothermal synthesis and luminescent properties of CaWO4: 3 + M3 + Eu , ( M = Tb, Sm, Bi, Dy)%CaWO4:Eu3+,M3+(M=Tb,Sm,Bi,Dy)的水热合成及发光性能研究

    Institute of Scientific and Technical Information of China (English)

    张丽霞; 梁利芳; 唐上惠; 易敏; 庞起

    2011-01-01

    利用水热合成法制备CaWO4∶Eu3+以及CaWO4∶Eu3+,M3+(M=Tb,Sm,Bi,Dy)系列钨酸盐基荧光粉,利用XRD表征产物CaWO4∶Eu3+(5%)的晶体结构,结果表明其结构和CaWO4的标准物相结构相似,为四方晶系结构;研究了CaWO4∶Eu3+的发光性能以及第二掺杂离子M3+(M=Tb,Sm,Bi,Dy)对荧光粉发光性能的影响,结果表明,在273 nm紫外光激发下,掺入Tb3+和Sm3+离子对CaWO4基质发光强度没有明显影响,但能增强荧光粉中Eu3+离子617 nm处的红光发射强度;掺入Bi3+和Dy3+离子能明显降低CaWO4基质的发光强度,同时能增强荧光粉中Eu3+离子617 nm处的红光发射强度.%Tungstate-based phosphors CaWO4: Eu3 + and CaWO4: Eu3 + , M3 + ( M = Tb, Sm, Bi,Dy) were prepared successfully by hydrothermal synthesis method. The crystal structure of CaWO4:Eu3+ (5%) characterized by XRD was tetragonal system, which was in accordance with CawO4 ( JCPDS file 85 - 0443 ). The luminescent properties of CaWO4: Eu3 + and the effect of M3 + ( M = Tb,Sm, Bi, Dy) on the luminescent properties of the fluorescent powder were investigated. Under the excitation of 273 nm, either Tb3 + or Sm3 + had no obvious effect on the emission intensity of CaWO4,but can enhance the intensity of 617 nm emission of Eu3+ ion. On the other hand, either Bi3 + or Dy3+ ion can reduce the emission intensity of CaWO4 and enchance the intensity of 617 nm emission of Eu3 + ion.

  19. Variable leak gas source

    Science.gov (United States)

    Henderson, Timothy M.; Wuttke, Gilbert H.

    1977-01-01

    A variable leak gas source and a method for obtaining the same which includes filling a quantity of hollow glass micro-spheres with a gas, storing said quantity in a confined chamber having a controllable outlet, heating said chamber above room temperature, and controlling the temperature of said chamber to control the quantity of gas passing out of said controllable outlet. Individual gas filled spheres may be utilized for calibration purposes by breaking a sphere having a known quantity of a known gas to calibrate a gas detection apparatus.

  20. Fuel gas and char from pyrolysis of waste paper in a microwave plasma reactor

    Energy Technology Data Exchange (ETDEWEB)

    Khongkrapan, Parin; Thanompongchart, Patipat; Tippayawong, Nakorn; Kiatsiriroat, Tanongkiat [Department of Mechanical Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200 (Thailand)

    2013-07-01

    In this study, a microwave plasma reactor was used for pyrolysis of waste papers. The effects of different argon flow rates on char and gas generation were investigated. Changes in carbon and oxygen contents from those in paper to char were significant. Char yield of over 25 % was obtained with the heating value of about 38 MJ/kg. Average gas yield and total content of combustible fraction (CO, CH4 and H2) in the gas product were 2.56 m3/kg and 36 %, respectively. The heating value of gas product and carbon conversion efficiency of the process were maximum at 6.0 MJ/m3 and 73 %, respectively.

  1. Study on Longitudinal Gas Permeability of Air-dried Masson Pine Sapwood

    Institute of Scientific and Technical Information of China (English)

    HOU Zhuqiang; ZHANG Lifei; GUAN Ning; CHEN Guihua

    2006-01-01

    Measurement of the longitudinal gas permeability was made for air-dried sapwood specimens from Masson pine(Pinus massoniana).Results showed that air-dried Masson pine sapwood was one of the most permeable softwoods.The investigated specimens had an average longitudinal gas permeability of 4.60 ×10-13m3/m.and the permeability ranged from 1.06×10-13 to 1.12 ×10-12m3/m.The Kruskal-Wallis Test indicated that,generally,there was no correlation between the longitudinal gas permeability and the trees from which specimens were prepared,and tree height had no significant effect on the longitudinal gas permeability.

  2. Fuel gas and char from pyrolysis of waste paper in a microwave plasma reactor

    Directory of Open Access Journals (Sweden)

    Parin Khongkrapan, Patipat Thanompongchart, Nakorn Tippayawong, Tanongkiat Kiatsiriroat

    2013-01-01

    Full Text Available In this study, a microwave plasma reactor was used for pyrolysis of waste papers. The effects of different argon flow rates on char and gas generation were investigated. Changes in carbon and oxygen contents from those in paper to char were significant. Char yield of over 25 % was obtained with the heating value of about 38 MJ/kg. Average gas yield and total content of combustible fraction (CO, CH4 and H2 in the gas product were 2.56 m3/kg and 36 %, respectively. The heating value of gas product and carbon conversion efficiency of the process were maximum at 6.0 MJ/m3 and 73 %, respectively.

  3. Flue gas treatment with membrane gas absorption

    NARCIS (Netherlands)

    Klaassen, R.; Feron, P.H.M.; Jansen, A.E.

    1998-01-01

    Dutch researchers from the TN0 Institute have developed a technique to carry out gas-liquid contacting operations using hollow fibre membranes in combination with an absorption liquid. The method known as membrane gas absorption, aims to combine the advantages of membrane technology (compactness, fl

  4. Gas purification using membrane gas absorption processes

    NARCIS (Netherlands)

    Dindore, V.Y.

    2003-01-01

    Owing to the increasing energy demand and the abundance of low quality natural gas reservoirs containing high percentages of CO2, considerable attention is given to the bulk removal of CO2 and upgrading of low quality natural gas. The main goal in doing so is to increase the heating value of natural

  5. Coke Oven Gas Based Methanol Production Capacity Reached 1.2 Mt/a in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Coke oven gas is one of the main byproducts of coke chemicals industry.One ton of coke formed can generate 430 m3of coke oven gas.Adoption of appropriate chemical processing method can convert methane contained in the coke oven gas into CO that can be further converted into methanol.It is learned that currently China has constructed and commissioned ten projects for manufacture of methanol fromcoke oven gas with the total production capacity reaching 1.2 Mt/a methanol.More than twenty coke gas-to-methanol units are under construction or in the stage of project design with their overall production capacity reaching nearly 3.0 Mt/a methanol.Relevant experts have indicated that the enterprises provided with coke production lines are capable of constructing coke gas-to-methanol projects to realize coproduction of coke and methanol while utilizing their own coke gas resources.

  6. Proposal of experimental device for the continuous accumulation of primary energy in natural gas hydrates

    Science.gov (United States)

    Siažik, Ján; Malcho, Milan; Lenhard, Richard

    2016-11-01

    Hydrates of the natural gas in the lithosphere are a very important potential source of energy that will be probably used in the coming decades. It seems as promising accumulation of the standard gas to form hydrates synthetically, stored, and disengage him when is peak demand. Storage of natural gas or biomethane in hydrates is advantageous not only in terms of storage capacity, but also from the aspect of safety storage hydrates. The gas stored in such form may occurs at relatively high temperatures and low pressures in comparison to other Technologies of gas- storage. In one cubic meter of hydrate can be stored up to 150 m3 of natural gas, depending on the conditions of thermobaric hydrate generation. This article discusses the design of the facility for the continuous generation of hydrates of natural gas measurement methodology and optimal conditions for their generation.

  7. Natural Gas Resource in Jurassic, Y Faulted Subbasin of Songliao Basin

    Institute of Scientific and Technical Information of China (English)

    Yang Haibo; Hu Yutao; Wei Xinghua

    2000-01-01

    Y faulted depression is located in the southeast of Songliao basin, which is another important area explored for natural gas in deep Formation after Xujiaweizi. But it is lowly explored and is not likely to make a major breakthrough in nature gas exploration for shallow and medium layers. The data on the geochemistry and geology indicate that the deep source rocks, especially the Jurassic mudstone bas great potentials of natural gas generation. Based on this, the paper examines the conditions of natural gas generation and further points out the favorable prospective gas - bearing area. The results show that the amount of natural gas generated from the Jurassic mudstone in the Y faulted depression is 8.42 × 1012m3 and the favorable gas - generating area is the body of the faulted depression.

  8. Strain correction in interleaved strain-encoded (SENC) cardiac MR

    Science.gov (United States)

    Motaal, Abdallah G.; Osman, Nael F.

    2010-03-01

    The strain encoding (SENC) technique directly encodes regional strain of the heart into the acquired MR images and produces two images with two different tunings so that longitudinal strain, on the short-axis view, or circumferential strain on the long-axis view, are measured. Interleaving acquisition is used to shorten the acquisition time of the two tuned images by 50%, but it suffers from errors in the strain calculations due to inter-tunings motion of the heart. In this work, we propose a method to correct for the inter-tunings motion by estimating the motion-induced shift in the spatial frequency of the encoding pattern, which depends on the strain rate. Numerical data was generated to test the proposed method and real images of human subjects were used for validation. The proposed method corrected the measured strain values so they became nearly identical to the original ones. The results show an improvement in strain calculations so as to relax the imaging constraints on spatial and temporal resolutions and improve image quality.

  9. Will the swine strain crowd out the seasonal influenza strain?

    CERN Document Server

    Schinazi, Rinaldo B

    2010-01-01

    We use spatial and non spatial models to argue that competition alone may explain why two influenza strains do not usually coexist. The more virulent strain is likely to crowd out the less virulent one. This can be seen as a consequence of the Exclusion Principle of Ecology. We exhibit, however, a spatial model for which coexistence is possible.

  10. A characterization of solution gas flaring in Alberta.

    Science.gov (United States)

    Johnson, M R; Kostiuk, L W; Spangelo, J L

    2001-08-01

    Information reported here is the result of a detailed analysis of data on flared and vented solution gas in the Province of Alberta in 1999. A goal of characterizing these flares was to aid in the improved management of solution gas flaring. In total, 4499 oil and bitumen batteries reported flaring or venting with a combined gas volume of 1.42 billion m3. There was significant site-to-site variation in volumes of gas flared or vented, gas composition, and flare design. Approximately 5% of physical batteries generate 35.7% of the gas flared and vented from oil and bitumen batteries. Therefore, if one were to attempt to mitigate flaring, significant progress could be made by starting with only the largest sites. The monthly variability of gas volumes was considered because high variability could affect implementation of alternative technologies. It was found that slightly more than 40% of the sites were reasonably steady and had monthly deviations of 100% or less from the average flared volume. The variability in monthly volumes was less for the larger batteries. Data from individual well sites show significant variability in the relative concentrations of each of the major species contained in solution gas.

  11. Milestone Report - M3FT-15OR03120211 - Complete Iodine Loading of NO Aged Ag0-functionalized Aerogel

    Energy Technology Data Exchange (ETDEWEB)

    Bruffey, Stephanie H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Patton, Kaara K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jubin, Robert Thomas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-05-29

    In off-gas treatment systems within a nuclear fuel reprocessing plant, capture materials will be exposed to a gas stream for extended periods during their lifetime. This gas stream may be at elevated temperature and could contain water, NOx gas, or a variety of other constituents. For this reason, it is important to understand the effects of long-term exposure, or aging, on proposed capture materials. One material under consideration for iodine sequestration is silver-functionalized silica aerogel (Ag0-aerogel). The aim of this study was to determine the effect of extended exposure at 150°C to an air stream containing NO on the iodine capture capacity of Ag0-aerogel. Ag0-aerogel was provided by the Pacific Northwest National Laboratory (PNNL), which manufactures the material at a lab scale. Prior to aging, the material has an iodine loading capacity of approximately 290 mg I/g Ag0-aerogel. Previous studies have aged the material in a dry air stream or in a moist air stream for up to 6 months. Both tests resulted in a 22% loss in iodine capacity. Aging the material in a static 2% NO2 environment for up to 2 months results in a 15% loss of iodine capacity.3 In this study, exposure of Ag0-aerogel to 1% NO at 150°C for 2 months produced a loss of 43% in iodine loading capacity. This is largest loss observed for aerogel aging studies to date. The performance of Ag0-aerogel in this study was compared to the performance of reduced silver mordenite (Ag0Z) in similar studies. Ag0Z is a zeolite mineral considered to be the current standard technology for iodine removal from off-gas streams of a potential US used fuel processing plant. In an aging study exposing Ag0Z to 1% NO for 2 months, an iodine capacity loss of over 80% was observed. This corresponds to a silver utilization of 13.5% for 2 month NO-aged Ag0Z, compared to 57% silver utilization for 2

  12. A Prediction Model of Oil Cracked Gas Resources and Its Application in the Gas Pools of Feixianguan Formation in NE Sichuan Basin, SW China

    Directory of Open Access Journals (Sweden)

    Tongshan Wang

    2011-01-01

    Full Text Available The prediction of oil cracked gas resources is necessary and urgent in the gas exploration of these basins at high to over stage in China. A marine crude oil sample was pyrolyzed using sealed gold tubes system in our study. The pyrolysates including gas, liquid, and solid were quantitatively analyzed. Based on the pyrolysis data and kinetic calculation, the yield correlativity among gas, liquid, and solid products was regressed with high correlative coefficients to establish a prediction model suitable for the resource estimation of oil cracked gas. The verification formula for this model was also established on the principle of mass conservation. The affecting factors and the application preconditions of this model were discussed. Finally the model was extrapolated to the prediction of oil cracked gas resources of Feixianguan formation in NE Sichuan basin, SW China. The prediction value of oil cracked resources is about 6.84×1012 m3, and generation intensity of oil cracked gas is about 97.5×108 m3/km2, and the paleo-oil reserves is about 97×108 t. The verifying value for this prediction is approximately equal to 1, indicating the model is reliable in the resource estimation of oil cracked gas.

  13. β-catenin accumulation in nuclei of hepatocellular carcinoma cells up-regulates glutathione-s-transferase M3 mRNA

    Institute of Scientific and Technical Information of China (English)

    Yu-Sang Li; Min Liu; Yoshihiro Nakata; He-Bin Tang

    2011-01-01

    AIM: To identify the differentially over-expressed genes associated with β-catenin accumulation in nuclei of hepatocellular carcinoma (HCC) cells.METHODS: Differentially expressed genes were identified in radiation-induced B6C3 F1 mouse HCC cells by mRNA differential display, Northern blot and RT-PCR,respectively. Total glutathione-s-transferase (GST) activity was measured by GST activity assay and β-catenin localization was detected with immunostaining in radiation-induced mouse HCC cells and in HepG2 cell lines.RESULTS: Two up-regulated genes, glutamine synthetase and glutathione-s-transferase M3 (GSTM3), were identified in radiation-induced mouse HCC cells. Influence of β-catenin accumulation in nuclei of HCC cells on upregulation of GSTM3 mRNA was investigated. The nearby upstream domain of GSTM3 contained the β-catenin/Tcf-Lef consensus binding site sequences [5'-(A/T)(A/T)CAAAG-3'], and the total GST activity ratio was considerably higher in B6C3F1 mouse HCC cells with β-cateninaccumulation in nuclei of HCC cells than in those withoutβ-catenin accumulation (0.353 ± 0.117 vs 0.071 ± 0.064,P < 0.001). The TWS119 (a distinct GSK-3β inhibitor)-induced total GST activity was significantly higher in HepG2 cells with β-catenin accumulation than in those withoutβ-catenin accumulation in nuclei of HCC cells. Additionally,the GSTM3 mRNA level was significantly higher at 24 h than at 12 h in TWS119-treated HepG2 cells.CONCLUSION: β-catenin accumulation increases GST activity in nuclei of HCC cells, and GSTM3 may be a novel target gene of the β-catenin/Tcf-Lef complex.

  14. Effect of cation site-disorder on the structure and magneto-transport properties of Ln5/8M3/8MnO 3 manganites

    Science.gov (United States)

    Collado, J. A.; Frontera, C.; García-Muñoz, J. L.; Aranda, M. A. G.

    2005-06-01

    Five members of Ln5/8M3/8MnO 3 series with A-cation size variance ( σ2) ranging between 3×10 -4 and 71×10 -4 Å 2, and the same A-cation size =1.2025 Å, have been synthesized by the ceramic method. The five manganites are single phase and they crystallize in the Pnma perovskite superstructure. The five compositions display ferromagnetic-paramagnetic transitions at temperatures ranging between 130 and 270 K, for the highest and lowest variance sample, respectively. The samples with smaller variances show sharp magnetization transitions and the samples with the larger variances display broad transitions. These transitions have also been studied by differential scanning calorimetry, DSC, and some enthalpy changes are reported. The resistivity study indicates that all samples display the expected metal-to-insulator transitions at temperatures ranging between 140 and 270 K. The samples have been analysed at room temperature by ultra-high-resolution synchrotron powder diffraction and the structural and microstructural features are reported. Furthermore, Nd 5/8Sr 0.255Ca 0.12MnO 3 ( σ2=40×10-4 Å2) and Sm 0.225Nd 0.4Sr 0.308Ca 0.067MnO 3 ( σ2=53×10-4 Å2) samples have also been studied by synchrotron powder diffraction at 140 K, below the transition temperatures. Both samples are found to be single phase above and below the transition by ultra-high-resolution synchrotron powder diffraction. The microstructure of the samples has been investigated through Williamson-Hall plots. Sample broadenings are markedly anisotropic and strongly dominated by microstrains with average values of the Δ d/ d term close to 14×10 -4. A direct correlation is found between the microstrain values and the widths of the magnetization transitions.

  15. Methyl sulfone induces loss of metastatic properties and reemergence of normal phenotypes in a metastatic cloudman S-91 (M3 murine melanoma cell line.

    Directory of Open Access Journals (Sweden)

    Joan McIntyre Caron

    Full Text Available BACKGROUND: The most deadly form of cancer is not lung or colon, breast or prostate; it is any cancer that has become metastatic. Mortality due to metastatic melanoma, one of the most aggressive and deadly cancers, has increased steadily over the last several decades. Unfortunately, the arsenal of chemotherapeutic agents available today is most often unsuccessful at extending and improving the life expectancy of afflicted individuals. We sought to identify an effective and nontoxic agent against metastatic melanoma. METHODOLOGY/PRINCIPAL FINDINGS: We chose to study Cloudman S-91 mouse melanoma cells (sub-clone M3, CCL53.1 because these cells are highly aggressive and metastatic, representing one of the deadliest types of cancer. Melanoma cells also had an experimental advantage because their morphology, which is easily monitored, relates to the physiology of metastatic cells and normal melanocytes. We chose to test methyl sulfone as a chemotherapeutic agent for two reasons. Because of its chemical structure, we speculated a potential anti-cancer activity by targeting microtubules. Equally important, methyl sulfone has a well-established safety profile in humans. Surprisingly, we found that malignant melanoma cells exposed to methyl sulfone demonstrated the loss of phenotypes characteristic of malignant cells, and the reemergence of phenotypes characteristic of healthy melanocytes. Briefly, over time methyl sulfone induced contact inhibition, loss of ability to migrate through an extracellular matrix, loss of anchorage-independent growth, proper wound healing followed by contact inhibition, irreversible senescence followed by arborization with melanosomes in arbors as seen in normal melanocytes. CONCLUSIONS/SIGNIFICANCE: Methyl sulfone may have clinical potential as a non-toxic agent effective against metastatic melanoma. Additionally, methyl sulfone has promise as a tool to explore molecular mechanisms of metastatic transformation as well as

  16. Data acquisition system of 16-channel EEG based on ATSAM3X8E ARM Cortex-M3 32-bit microcontroller and ADS1299

    Science.gov (United States)

    Toresano, L. O. H. Z.; Wijaya, S. K.; Prawito, Sudarmaji, A.; Badri, C.

    2017-07-01

    The prototype of the EEG (electroencephalogram) instrumentation systems has been developed based on 32-bit microcontrollers of Cortex-M3 ATSAM3X8E and Analog Front-End (AFE) ADS1299 (Texas Instruments, USA), and also consists of 16-channel dry-electrodes in the form of EEG head-caps. The ADS1299-AFE has been designed in a double-layer format PCB (Print Circuit Board) with daisy-chain configuration. The communication protocol of the prototype was based on SPI (Serial Peripheral Interface) and tested using USB SPI-Logic Analyzer Hantek4032L (Qingdao Hantek Electronic, China). The acquired data of the 16-channel from this prototype has been successfully transferred to a PC (Personal Computer) with accuracy greater than 91 %. The data acquisition system has been visualized with time-domain format in the multi-graph plotter, the frequency-domain based on FFT (Fast Fourier Transform) calculation, and also brain-mapping display of 16-channel. The GUI (Graphical User Interface) has been developed based on OpenBCI (Brain Computer Interface) using Java Processing and also can be stored of data in the *.txt format. Instrumentation systems have been tested in the frequency range of 1-50 Hz using MiniSim 330 EEG Simulator (NETECH, USA). The validation process has been done with different frequency of 0.1 Hz, 2 Hz, 5 Hz, and 50 Hz, and difference voltage amplitudes of 10 µV, 30 µV, 50 µV, 100 µV, 500 µV, 1 mV, 2 mV and 2.5 mV. However, the acquisition system was not optimal at a frequency of 0.1 Hz and for amplitude potentials of over 1 mV had differences of the order 10 µV.

  17. World Natural Gas Model

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    RAMSGAS, the Research and Development Analysis Modeling System World Natural Gas Model, was developed to support planning of unconventional gaseoues fuels research and development. The model is a scenario analysis tool that can simulate the penetration of unconventional gas into world markets for oil and gas. Given a set of parameter values, the model estimates the natural gas supply and demand for the world for the period from 1980 to 2030. RAMSGAS is based on a supply/demand framwork and also accounts for the non-renewable nature of gas resources. The model has three fundamental components: a demand module, a wellhead production cost module, and a supply/demand interface module. The demand for gas is a product of total demand for oil and gas in each of 9 demand regions and the gas share. Demand for oil and gas is forecast from the base year of 1980 through 2030 for each demand region, based on energy growth rates and price-induced conservation. For each of 11 conventional and 19 unconventional gas supply regions, wellhead production costs are calculated. To these are added transportation and distribution costs estimates associated with moving gas from the supply region to each of the demand regions and any economic rents. Based on a weighted average of these costs and the world price of oil, fuel shares for gas and oil are computed for each demand region. The gas demand is the gas fuel share multiplied by the total demand for oil plus gas. This demand is then met from the available supply regions in inverse proportion to the cost of gas from each region. The user has almost complete control over the cost estimates for each unconventional gas source in each year and thus can compare contributions from unconventional resources under different cost/price/demand scenarios.

  18. A discussion on gas sources of the Feixianguan Formation H2S-rich giant gas fields in the northeastern Sichuan Basin

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In recent years several H2S-rich oolite giant gas pools have been discovered in the Lower Triassic Feixianguan Formation of the northeastern Sichuan basin, and their explored gas reserves have been over 5000x108 m3. However, gas sources remain unsolved due to multiple source horizons with high maturity in this area and TSR alterations. By integrating analytical data of natural gas samples with conprehensive investigations on many factors, such as oil-gas geology, distribution and evolution of source rocks, charging and adjustment of gas pools, mixture of natural gases and secondery alterations, the present study concluded that the dominant source for the Feixianguan Fr. gas pools is the Permian Longtan Fr. source rock and secondly the Silurian Longmaxi Fr. source rock. Natural gases from the various gas pools differ genetically due to the matching diversity of seal configurations with phases of hydrocarbon generation and expulsion by different source rocks, among which natural gases in Puguang Gasfield are dominated by the trapped gas generated from the Longtan Fr. source rock and commingled with the gas cracked from the Silurian crude oil, while those in Dukouhe,Tieshangpo and Luojiazhai Gasfields are composed mainly of the Silurian oil-cracking gas and commingled with the natural gas derived from the Longtan Fr. source rock.

  19. Complete genome sequence of Thauera aminoaromatica strain MZ1T

    Science.gov (United States)

    Jiang, Ke; Sanseverino, John; Chauhan, Archana; Lucas, Susan; Copeland, Alex; Lapidus, Alla; Del Rio, Tijana Glavina; Dalin, Eileen; Tice, Hope; Bruce, David; Goodwin, Lynne; Pitluck, Sam; Sims, David; Brettin, Thomas; Detter, John C.; Han, Cliff; Chang, Y.J.; Larimer, Frank; Land, Miriam; Hauser, Loren; Kyrpides, Nikos C.; Mikhailova, Natalia; Moser, Scott; Jegier, Patricia; Close, Dan; DeBruyn, Jennifer M.; Wang, Ying; Layton, Alice C.; Allen, Michael S.; Sayler, Gary S.

    2012-01-01

    Thauera aminoaromatica strain MZ1T, an isolate belonging to genus Thauera, of the family Rhodocyclaceae and the class the Betaproteobacteria, has been characterized for its ability to produce abundant exopolysaccharide and degrade various aromatic compounds with nitrate as an electron acceptor. These properties, if fully understood at the genome-sequence level, can aid in environmental processing of organic matter in anaerobic cycles by short-circuiting a central anaerobic metabolite, acetate, from microbiological conversion to methane, a critical greenhouse gas. Strain MZ1T is the first strain from the genus Thauera with a completely sequenced genome. The 4,496,212 bp chromosome and 78,374 bp plasmid contain 4,071 protein-coding and 71 RNA genes, and were sequenced as part of the DOE Community Sequencing Program CSP_776774. PMID:23407619

  20. Complete genome sequence of Thauera aminoaromatica strain MZ1T

    Energy Technology Data Exchange (ETDEWEB)

    Sanseverino, John [ORNL; Chauhan, Archana [University of Tennessee, Knoxville (UTK); Lucas, Susan [U.S. Department of Energy, Joint Genome Institute; Copeland, A [U.S. Department of Energy, Joint Genome Institute; Lapidus, Alla L. [U.S. Department of Energy, Joint Genome Institute; Glavina Del Rio, Tijana [U.S. Department of Energy, Joint Genome Institute; Dalin, Eileen [U.S. Department of Energy, Joint Genome Institute; Tice, Hope [U.S. Department of Energy, Joint Genome Institute; Bruce, David [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [U.S. Department of Energy, Joint Genome Institute; Sims, David [Los Alamos National Laboratory (LANL); Brettin, Thomas S [ORNL; Detter, J. Chris [U.S. Department of Energy, Joint Genome Institute; Han, Cliff [Los Alamos National Laboratory (LANL); Chang, Yun-Juan [ORNL; Larimer, Frank W [ORNL; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Kyrpides, Nikos C [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Moser, Scott [University of Tennessee, Knoxville (UTK); Jegier, Patricia [University of Tennessee, Knoxville (UTK); Close, Dan [University of Tennessee, Knoxville (UTK); Wang, Ying [University of Tennessee, Knoxville (UTK); Layton, Alice [University of Tennessee, Knoxville (UTK); Allen, Michael S. [University of Tennessee, Knoxville (UTK); Sayler, Gary [University of Tennessee, Knoxville (UTK)

    2012-01-01

    Thauera aminoaromatica strain MZ1T, an isolate belonging to genus Thauera, of the family Rhodocyclaceae and the class the Betaproteobacteria, has been characterized for its ability to produce abundant exopolysaccharide and degrade various aromatic compounds with nitrate as an electron acceptor. These properties, if fully understood at the genome-sequence level, can aid in environmental processing of organic matter in anaerobic cycles by short-circuiting a central anaerobic metabolite, acetate, from microbiological conversion to methane, a criti-cal greenhouse gas. Strain MZ1T is the first strain from the genus Thauera with a completely sequenced genome. The 4,496,212 bp chromosome and 78,374 bp plasmid contain 4,071 protein-coding and 71 RNA genes, and were sequenced as part of the DOE Community Se-quencing Program CSP{_}776774.

  1. Production of CTX-M-3 extended-spectrum beta-lactamase and IMP-1 metallo beta-lactamase by five Gram-negative bacilli: survey of clinical isolates from seven laboratories collected in 1998 and 2000, in the Kinki region of Japan.

    Science.gov (United States)

    Yamasaki, Katsutoshi; Komatsu, Masaru; Yamashita, Tomonari; Shimakawa, Koichi; Ura, Toshiro; Nishio, Hisaaki; Satoh, Kaori; Washidu, Ryoudou; Kinoshita, Shohiro; Aihara, Masanori

    2003-03-01

    The aim of this study was to research the distribution in the Kinki region of Japan of Enterobacteriaceae and Pseudomonas aeruginosa that produce extended-spectrum beta-lactamase (ESBL) and metallo beta-lactamase (MBL). One thousand isolates, 200 of each of four enterobacterial species (i.e. Escherichia coli, Klebsiella pneumoniae, Enterobacter cloacae and Serratia marcescens) and 200 of P. aeruginosa, were collected from seven different laboratories during two 2 month periods, one in 1998 and one in 2000. A double-disc synergy test (DDST) and 2-mercaptopropionic acid inhibition test (2-MPAT) were used to confirm beta-lactamase-producing isolates. The DDST was positive for one isolate of E. coli, five of K. pneumoniae, two of E. cloacae and 14 of S. marcescens. The 2-MPAT was positive for five isolates of S. marcescens and two of P. aeruginosa. We identified the beta-lactamase type of each isolate by molecular confirmatory tests (isoelectric focusing, PCR and DNA sequencing): CTX-M-3 ESBLs (three isolates of K. pneumoniae, two of E. cloacae and 13 of S. marcescens), CTX-M-2 ESBL (one isolate of K. pneumoniae), SHV-12 ESBLs (one isolate of E. coli and one of S. marcescens), CTX-M-3 and SHV-12 combination ESBL (one isolate of K. pneumoniae) and IMP-1 MBLs (five isolates of S. marcescens and two of P. aeruginosa). In conclusion, many species of Gram-negative bacilli that produce CTX-M-3 ESBLs and IMP-1 MBLs were disseminated widely in different hospitals of the Kinki region of Japan. Therefore, monitoring of laboratory bacterial ecology seems important to stop the spread of these strains through nosocomial outbreaks.

  2. Virulence factors of Streptococcus pyogenes strains from women in peri-labor with invasive infections.

    Science.gov (United States)

    Golińska, E; van der Linden, M; Więcek, G; Mikołajczyk, D; Machul, A; Samet, A; Piórkowska, A; Dorycka, M; Heczko, P B; Strus, M

    2016-05-01

    Invasive group A streptococcal (GAS) infections constitute an important epidemiological problem. Many cases occur in women during the postnatal period. The objective of this study was to evaluate the presence of the genes responsible for production of iron-chelating protein (perR) and superantigens (speA, speB, speC, speF, speG, speH, speI, speJ, speK, speL, speM, smeZ, and ssa) in S. pyogenes strains isolated from invasive infections in women after delivery. Furthermore, this study sought to verify whether S. pyogenes strains show special phenotypic and genotypic (sla, spy1325) characteristics that may play a decisive role in adherence to the genital tract epithelium. Moreover, the emm-types and antibiotic susceptibility were determined. We tested 30 invasive S. pyogenes strains isolated from postpartum invasive infection and 37 GAS control strains isolated from the genital tracts of asymptomatic multiparous women. The majority of the tested strains were shown to express two types of emm genes (1 and 28), though emm -12, -28, -75 and -89 were uniquely expressed in the group of strains isolated from invasive infections. A significantly higher prevalence of perR in the strains from puerperal fever was shown. Significant differences were also found between the two groups with respect to the incidence of the genes related to adherence; GAS strains originating from women with sepsis/puerperal fever showed presence of these genes less frequently than those of the control group. Although differences in frequencies of the gene coding for various superantigens were noted between the compared groups of GAS strains, they were not significant.

  3. Sceneries and projections of demands of natural gas in Brazil; Cenario e projecoes das demandas de gas natural no pais

    Energy Technology Data Exchange (ETDEWEB)

    Chianca, Marcos Duilio de Oliveira; Marques, Ziney Dias [SENAI - Servico Nacional de Aprendizagem Industrial, Rio de Janeiro, RJ (Brazil). Sistema FIRJAN

    2004-07-01

    Interest in Natural Gas in Brazil emerged in the second half of the twentieth century, against a background in which the global giants of the petroleum and gas industries stated that reserves within the country were not commercially viable. This scenario changed with the discovery of numerous oil and gas fields and resulted in the participation of numerous foreign companies bidding for exploration and production rights in the new fields established by ANP. Natural Gas has come to assume a new dimension with further recent discoveries in Santos, Espirito Santo, Sergipe and Urucu, with proven reserves in the order of 490 billion m3. This new dimension is reinforced by PETROBRAS's current strategic plan which considers investments in the order of 3.5 Billion U$ dollars for the production, processing and transport of Natural Gas and half a billion dollars for thermoelectric power stations. The use of Natural Gas in industries, in general, and in the generation of electricity will provide a strong push for the country's economy, substituting other sources of energy with the recognized advantages for production and reduced environmental impact. In this new era 24 gas distribution companies, widely distributed throughout Brazil, are also programming new investments to make best the use of Natural Gas for industry, commerce, for the residential sector and throughout all the national territory. (author)

  4. The effect of hexose ratios on metabolite production in Saccharomyces cerevisiae strains obtained from the spontaneous fermentation of mezcal.

    Science.gov (United States)

    Oliva Hernández, Amanda A; Taillandier, Patricia; Reséndez Pérez, Diana; Narváez Zapata, José A; Larralde Corona, Claudia Patricia

    2013-04-01

    Mezcal from Tamaulipas (México) is produced by spontaneous alcoholic fermentation using Agave spp. musts, which are rich in fructose. In this study eight Saccharomyces cerevisiae isolates obtained at the final stage of fermentation from a traditional mezcal winery were analysed in three semi-synthetic media. Medium M1 had a sugar content of 100 g l(-1) and a glucose/fructose (G/F) of 9:1. Medium M2 had a sugar content of 100 g l(-1) and a G/F of 1:9. Medium M3 had a sugar content of 200 g l(-1) and a G/F of 1:1. In the three types of media tested, the highest ethanol yield was obtained from the glucophilic strain LCBG-3Y5, while strain LCBG-3Y8 was highly resistant to ethanol and the most fructophilic of the mezcal strains. Strain LCBG-3Y5 produced more glycerol (4.4 g l(-1)) and acetic acid (1 g l(-1)) in M2 than in M1 (1.7 and 0.5 g l(-1), respectively), and the ethanol yields were higher for all strains in M1 except for LCBG-3Y5, -3Y8 and the Fermichamp strain. In medium M3, only the Fermichamp strain was able to fully consume the 100 g of fructose l(-1) but left a residual 32 g of glucose l(-1). Regarding the hexose transporters, a high number of amino acid polymorphisms were found in the Hxt1p sequences. Strain LCBG-3Y8 exhibited eight unique amino acid changes, followed by the Fermichamp strain with three changes. In Hxt3p, we observed nine amino acid polymorphisms unique for the Fermichamp strain and five unique changes for the mezcal strains.

  5. Natural gas annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This document provides information on the supply and disposition of natural gas to a wide audience. The 1996 data are presented in a sequence that follows natural gas from it`s production to it`s end use.

  6. Sulphur hexafluoride gas detection

    CSIR Research Space (South Africa)

    Stolper, R

    2006-02-01

    Full Text Available This poster describes the development process of an electro-optical based solution for detecting and locating SF6 gas leaks at gas insulated switch gear. The principal technologies that were researched are explained with their advantages...

  7. Strained graphene Hall bar

    Science.gov (United States)

    Milovanović, S. P.; Peeters, F. M.

    2017-02-01

    The effects of strain, induced by a Gaussian bump, on the magnetic field dependent transport properties of a graphene Hall bar are investigated. The numerical simulations are performed using both classical and quantum mechanical transport theory and we found that both approaches exhibit similar characteristic features. The effects of the Gaussian bump are manifested by a decrease of the bend resistance, R B, around zero-magnetic field and the occurrence of side-peaks in R B. These features are explained as a consequence of bump-assisted scattering of electrons towards different terminals of the Hall bar. Using these features we are able to give an estimate of the size of the bump. Additional oscillations in R B are found in the quantum description that are due to the population/depopulation of Landau levels. The bump has a minor influence on the Hall resistance even for very high values of the pseudo-magnetic field. When the bump is placed outside the center of the Hall bar valley polarized electrons can be collected in the leads.

  8. Biomechanics of expansive unilateral open-door laminoplasty of the cervical spine with OsteoMed M3 plate and screws%颈椎单开门OsteoMed M3钉板内固定椎管扩大成形术的生物力学研究

    Institute of Scientific and Technical Information of China (English)

    胡孔和; 吴强; 靳安民; 段扬; 席新华; 赵卫东

    2013-01-01

    目的 观察在单开门术中应用OsteoMed M3钉板内固定重建颈椎稳定性的效果.方法 6具新鲜颈椎标本,对每一标本先后行完整颈椎组、后路单开门OsteoMed M3钉板内固定组、后路椎板切除组、后路椎板切除加侧块钉棒内固定组的三维运动范围测试.结果 行后路钢板内固定组,在前屈(22.65±2.39)、后伸(15.63±1.56)、左侧弯(19.83±3.16)、右侧弯(16.90±2.13)及右旋(19.45±3.00)状态下运动范围与椎板切除组及侧块钉棒组之间的差异有统计学意义(P<0.05),与正常组的运动范围接近,差异无统计学意义(P>0.05);在左旋(20.67±2.89)状态下运动范围与其他各组之间的差异有统计学意义(P<0.05).椎板切除及侧块钉棒组与其他各组之间的差异有统计学意义(JP<0.05).结论 在单开门术中应用OsteoMed M3钉板内固定具有良好的生物力学性能,可重建颈椎稳定性.%Objective To investigate the stability of cervical vertebrae of the method for that OsteoMed M3 titanium plate and screws were used to secure the posterior elements in the open position after expansive unilateral open-door laminoplasty.Methods Six human cadaveric specimens were harvested freshly,and the range of motion of different groups was measured by a three-dimensional spinal stability test,including intact cervical specimens group,laminoplasty with plate group,laminectomy group,and laminectomy and fusion group.Results After expansive unilateral open-door laminoplasty,the plate group exhibited a more significant difference in angular motion than in laminectomy group,and laminectomy and fusion group in ROM of flexion (22.65 ± 2.39),extension (15.63 ± 1.56),left lateral bending (19.83 ±3.16),right lateral bending (16.90 ± 2.13) and right axial rotation (19.45 ± 3.00) (P < 0.05),and it was not significantly different from intact cervical specimens group (P > 0.05).The plate group exhibited a more significant difference in angular

  9. Strain induced novel quantum magnetotransport properties of topological insulators

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Ning, E-mail: maning@stu.xjtu.edu.cn [Department of Physics, Taiyuan University of Technology, Taiyuan 030024 (China); Department of Applied Physics, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, Xi’an Jiaotong University, Xi’an 710049 (China); Zhang, Shengli, E-mail: zhangsl@mail.xjtu.edu.cn [Department of Applied Physics, MOE Key Laboratory for Nonequilibrium Synthesis and Modulation of Condensed Matter, Xi’an Jiaotong University, Xi’an 710049 (China); Liu, Daqing, E-mail: liudq@cczu.edu.cn [School of Mathematics and Physics, Changzhou University, Changzhou 213164 (China)

    2016-12-15

    Recent theoretical and experimental researches have revealed that the strained bulk HgTe can be regarded as a three-dimensional topological insulator (TI). Motivated by this, we explore the strain effects on the transport properties of the HgTe surface states, which are modulated by a weak 1D in-plane electrostatic periodic potential in the presence of a perpendicular magnetic field. We analytically derive the zero frequency (dc) diffusion conductivity for the case of quasielastic scattering in the Kubo formalism, and find that, in strong magnetic field regime, the Shubnikov–de Haas oscillations are superimposed on top of the Weiss oscillations due to the electric modulation for null and finite strain. Furthermore, the strain is shown to remove the degeneracy in inversion symmetric Dirac cones on the top and bottom surfaces. This accordingly gives rise to the splitting and mixture of Landau levels, and the asymmetric spectrum of the dc conductivity. These phenomena, not known in a conventional 2D electron gas and even in a strainless TI and graphene, are a consequence of the anomalous spectrum of surface states in a fully stained TI. These results should be valuable for electronic and spintronic applications of TIs, and thus we fully expect to see them in the further experiment. - Highlights: • The strain removes the degeneracy in inversion symmetric Dirac cones. • The strain gives rise to the splitting and mixture of the Landau levels. • The strain leads to the asymmetric spectrum of the dc conductivity. • Shubnikov de Haas oscillations are shown to be superimposed on Weiss oscillations. • Interplay between strain and electric field causes different occupancy of TI states.

  10. Carbazole degradation in the soil microcosm by tropical bacterial strains

    Directory of Open Access Journals (Sweden)

    Lateef B. Salam

    2015-01-01

    Full Text Available In a previous study, three bacterial strains isolated from tropical hydrocarbon-contaminated soils and phylogenetically identified as Achromobacter sp. strain SL1, Pseudomonassp. strain SL4 and Microbacterium esteraromaticum strain SL6 displayed angular dioxygenation and mineralization of carbazole in batch cultures. In this study, the ability of these isolates to survive and enhance carbazole degradation in soil were tested in field-moist microcosms. Strain SL4 had the highest survival rate (1.8 x 107 cfu/g after 30 days of incubation in sterilized soil, while there was a decrease in population density in native (unsterilized soil when compared with the initial population. Gas chromatographic analysis after 30 days of incubation showed that in sterilized soil amended with carbazole (100 mg/kg, 66.96, 82.15 and 68.54% were degraded by strains SL1, SL4 and SL6, respectively, with rates of degradation of 0.093, 0.114 and 0.095 mg kg−1 h−1. The combination of the three isolates as inoculum in sterilized soil degraded 87.13% carbazole at a rate of 0.121 mg kg−1 h−1. In native soil amended with carbazole (100 mg/kg, 91.64, 87.29 and 89.13% were degraded by strains SL1, SL4 and SL6 after 30 days of incubation, with rates of degradation of 0.127, 0.121 and 0.124 mg kg−1h−1, respectively. This study successfully established the survivability (> 106 cfu/g detected after 30 days and carbazole-degrading ability of these bacterial strains in soil, and highlights the potential of these isolates as seed for the bioremediation of carbazole-impacted environments.

  11. Natural Gas Basics

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-08

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  12. Natural Gas Basics

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  13. CHINA'S GAS MARKET TODAY

    Institute of Scientific and Technical Information of China (English)

    Chu Haihong

    2005-01-01

    @@ According to JPMorgan's review 2003 of China's gas market,China's household gas price was one of the lowest in the world, 20% below the global average. Despite the increase in recent years, China's domestic gas price is still relatively low in the global context. It is safe to say that the low gas price is one of the keys attracting keen investments currently from overseas and domestic private capitals.

  14. Natural gas annual 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-17

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1994 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1990 to 1994 for each Census Division and each State. Annual historical data are shown at the national level.

  15. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 2 covers the advances in gas phase ion chemistry. The book discusses the stabilities of positive ions from equilibrium gas-phase basicity measurements; the experimental methods used to determine molecular electron affinities, specifically photoelectron spectroscopy, photodetachment spectroscopy, charge transfer, and collisional ionization; and the gas-phase acidity scale. The text also describes the basis of the technique of chemical ionization mass spectrometry; the energetics and mechanisms of unimolecular reactions of positive ions; and the photodissociation

  16. Natural gas annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level.

  17. Liquid propellant gas generators

    Science.gov (United States)

    1972-01-01

    The design of gas generators intended to provide hot gases for turbine drive is discussed. Emphasis is placed on the design and operation of bipropellant gas generators because of their wider use. Problems and limitations involved in turbine operation due to temperature effects are analyzed. Methods of temperature control of gas turbines and combustion products are examined. Drawings of critical sections of gas turbines to show their operation and areas of stress are included.

  18. Aseismic strain episodes at Campi Flegrei, Italy

    Science.gov (United States)

    Scarpa, Roberto; Amoruso, Antonella; Bilham, Roger; Di Lieto, Bellina; Errico, Antonio; Linde, Alan; Sacks, Selwyn

    2014-05-01

    Since spring 2004 a research project has been developed in Italy to install borehole Sacks-Evertson strainmeters (dilatometers) aimed to improve monitoring systems of the Italian volcanoes. 6 borehole dilatometers have been installed around Campi Flegrei and Vesuvius during 2004-2005 (Scarpa et al., 2007). This small network has been implemented by two arrays of long-baseline water tube tiltmeters installed in underground tunnels since 2008. Relevant strainmeter and tiltmeter data have been collected and analyzed at the instruments installed at Campi Flegrei during the recent unrest episodes. Renewed activity started since 2004-2005, characterized by a quite low rate of vertical vertical displacement, amounting initially to a few cm/year. A long term strain episode occurred during summer 2006, in correspondence to an increase of CO2 emission and displacements measured also by tiltmeters and GPS transducers. This strain episode preceded the seismic activity by few months, as also observed during the 1982 most significant unrest. Other aseismic slip episodes have been recorded in 2009, in correspondence of the renewal of gas emission activity at Solfatara, in 2010, one day before a seismic swarm, and in September 2012, few days before the most significant seismic swarm occurred after the 1982-1984 uplift. The time scale of these phenomena is ranging from some hours to several days, putting further constraints on the origin of ground uplifts at Campi Flegrei. Their location is compatible with the source inferred from long term deformation signals, at about 4 km depth beneath Pozzuoli.

  19. Microscale Gas Chemistry

    Science.gov (United States)

    Mattson, Bruce; Anderson, Michael P.

    2011-01-01

    The development of syringes having free movement while remaining gas-tight enabled methods in chemistry to be changed. Successfully containing and measuring volumes of gas without the need to trap them using liquids made it possible to work with smaller quantities. The invention of the LuerLok syringe cap also allowed the gas to be stored for a…

  20. Demonstrating the Gas Laws.

    Science.gov (United States)

    Holko, David A.

    1982-01-01

    Presents a complete computer program demonstrating the relationship between volume/pressure for Boyle's Law, volume/temperature for Charles' Law, and volume/moles of gas for Avagadro's Law. The programing reinforces students' application of gas laws and equates a simulated moving piston to theoretical values derived using the ideal gas law.…

  1. Residual strains in conduit arteries.

    Science.gov (United States)

    Rachev, A; Greenwald, S E

    2003-05-01

    Residual strains and stresses are those that exist in a body when all external loads are removed. Residual strains in arteries can be characterized by the opening angle of the sector-like cross-section which arises when an unloaded ring segment is radially cut. A review of experimental methods for measuring residual strains and the main results about the variation of the opening angle with arterial localization, age, smooth muscle activity, mechanical environment and certain vascular pathologies are presented and discussed. It is shown that, in addition to their well-established ability to homogenize the stress field in the arterial wall, residual strains make arteries more compliant and thereby improve their performance as elastic reservoirs and ensure more effective local control of the arterial lumen by smooth muscle cells. Finally, evidence that, in some cases, residual strains remain in arteries even after they have been cut radially is discussed.

  2. High temperature static strain gage development

    Science.gov (United States)

    Hulse, C. O.; Bailey, R. S.; Grant, H. P.; Anderson, W. L.; Przybyszewski, J. S.

    1991-01-01

    Final results are presented from a program to develop a thin film static strain gage for use on the blades and vanes of running, test stand gas turbine engines with goals of an 3 x 3 mm gage area and total errors of less than 10 pct. of + or - 2,000 microstrain after 50 hrs at 1250 K. Pd containing 13 Wt. pct. Cr was previously identified as a new strain sensor alloy that appeared to be potentially usable to 1250 K. Subsequently, it was discovered, in contrast with its behavior in bulk, that Pd-13Cr suffered from oxidation attack when prepared as a 4.5 micron thick thin film. Continuing problems with electrical leakage to the substrate and the inability of sputtered alumina overcoats to prevent oxidation led to the discovery that sputtered alumina contains appreciable amounts of entrapped argon. After the argon has been exsolved by heating to elevated temperatures, the alumina films undergo a linear shrinkage of about 2 pct. resulting in formation of cracks. These problems can be largely overcome by sputtering the alumina with the substrate heated to 870 K. With 2 micron thick hot sputtered alumina insulation and overcoat films, total 50 hr drifts of about 100 microstrain (2 tests) and about 500 microstrain (1 test) were observed at 1000 and 1100 K, respectively. Results of tests on complete strain gage systems on constant moment bend bars with Pd temperature compensation grids revealed that oxidation of the Pd grid was a major problem even when the grid was overcoated with a hot or cold sputtered alumina overcoat.

  3. Research on adverse drug events. I. Muscarinic M3 receptor binding affinity could predict the risk of antipsychotics to induce type 2 diabetes.

    Science.gov (United States)

    Silvestre, J S; Prous, J

    2005-06-01

    Antipsychotics are associated with a wide range of adverse effects, several of which may represent a serious health risk to patients. There is an increased concern about metabolic disturbances associated with antipsychotics, including weight gain, dyslipidemia, hyperglycemia, and type 2 diabetes. However, little is known about the mechanisms underlying antipsychotic-induced metabolic disturbances and, in particular, those related to the induction of abnormal glucose metabolism and diabetes. The present article aimed to identify those receptor(s) that are most likely to be involved with or mediate antipsychotics-induced diabetes. Two independent measures taken from literature to indicate the risk of type 2 diabetes associated with 25 typical and atypical antipsychotic drugs were considered, along with their binding affinities to 21 specific receptors (obtained from the resources of Prous Science Integrity). A range of both exploratory and predictive statistical analyses were applied, including principal component factorial analysis, multivariable linear regression analysis, and discriminant analysis. Binding affinities (pKi) to human neurotransmitter receptors and monoaminergic transporters were used as independent variables (predictors). Measures to determine the risk to induce new-onset type 2 diabetes associated with each antipsychotic, logistic regression odds-ratio (dOR) and a discrete scale-based risk (three levels: 'low,' 'moderate,' 'high'), were used as the dependent variables (criteria). Similarly, parallel analyses were also conducted for other measures (average effective therapeutic dose) or adverse effects (weight gain, extrapyramidal side effects, hyperprolactinemia, anticholinergic, hypotension, and sedation) associated with antipsychotics, where underlying mechanisms have been previously established and, therefore, serve as positive-control references. Affinity for the cholinergic muscarinic M3 receptor subtype was presented as the best predictor for

  4. Experiment lithopanspermia: test of interplanetary transfer and re-entry process of epi- and endolithic microbial communities in the FOTON-M3 Mission

    Science.gov (United States)

    de La Torre Noetzel, Rosa

    The Lithopanspermia hypothesis assumes that impact-expelled rocks serve as interplanetary transfer vehicles for microorganisms colonizing those rocks. It requires that the microorganisms survive (1) the impact ejection process from the planet of origin; (2) travelling through space; (3) capture and landing on another planet. In the experiment "Lithopanspermia" on board of the FOTON-M3 satellite (14.09.07) steps 2 and 3 of this scenario have been experimentally tested. Assay systems for step 2 were the bipolar epilithic lichen species Rhizocarpon geographicum and Xanthoria elegans on their natural rock substrate as well as their reproduction structures, microbial communities from atacamás halites Chroococcidiopsiss, endolithic communities of Anabaena and Nostoc, and the vagrant lichen species Aspicilia fruticulosa. The samples were exposed to outer space conditions within the BIOPAN-6 facility of ESA. Preparatory space simulation studies (UV solar spectrum radiation and vacuum at 10-2 Pa) performed at the Spasolab-Laboratory of INTA (March-April 2007), have demonstrated the suitability of those lichen species. After flight (10 days exposure to harsh space conditions in low Earth orbit at about 300 km altitude) and recovery, the survival capacity of the microbial communities has been assayed. First analyses have confirmed a fast recovery of the biological activity (chlorophyll a- fluorescence) of the lichens, similar to the high survival rates observed in the experiment LICHENS onboard of the Foton-M2 mission (de la Torre et al., 2007; Sancho et al., 2007). There were no significant changes in relation with the pre-flight values of the epilithic-, endolithicand vagrant lichen samples. First results of Confocal Scanning Laser Microscopy have demonstrated a high vitality of epilithic samples. Ultrastructural changes are being analyzed by Transmission Electron Microscopy and Cryoscanning. Furthermore, concerning the germination capacity of ascospores of Xanthoria

  5. Natural Gas Gathering and Purification in Sichuan Gas Fields

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhilin

    1996-01-01

    @@ Natural Gas Gathering and Transmission Technology The construction of gas gathering & transmission lines and stations is an important part of the surface construction of gas fields, whose investment accounts for about half of the total in gas field's development.

  6. High temperature strain measurement with a resistance strain gage

    Science.gov (United States)

    Lei, Jih-Fen; Fichtel, ED; Mcdaniel, Amos

    1993-01-01

    A PdCr based electrical resistance strain gage was demonstrated in the laboratory to be a viable sensor candidate for static strain measurement at high temperatures. However, difficulties were encountered while transferring the sensor to field applications. This paper is therefore prepared for recognition and resolution of the problems likely to be encountered with PdCr strain gages in field applications. Errors caused by the measurement system, installation technique and lead wire attachment are discussed. The limitations and some considerations related to the temperature compensation technique used for this gage are also addressed.

  7. Electronic properties and strain sensitivity of CVD-grown graphene with acetylene

    Science.gov (United States)

    Yang, Meng; Sasaki, Shinichirou; Ohnishi, Masato; Suzuki, Ken; Miura, Hideo

    2016-04-01

    Although many studies have shown that large-area monolayer graphene can be formed by chemical vapor deposition (CVD) using methane gas, the growth of monolayer graphene using highly reactive acetylene gas remains a big challenge. In this study, we synthesized a uniform monolayer graphene film by low-pressure CVD (LPCVD) with acetylene gas. On the base of Raman spectroscopy measurements, it was found that up to 95% of the as-grown graphene is monolayer. The electronic properties and strain sensitivity of the LPCVD-grown graphene with acetylene were also evaluated by testing the fabricated field-effect transistors (FETs) and strain sensors. The derived carrier mobility and gauge factor are 862-1150 cm2/(V·s) and 3.4, respectively, revealing the potential for high-speed FETs and strain sensor applications. We also investigated the relationship between the electronic properties and the graphene domain size.

  8. Marketing mix - commercial gas

    Energy Technology Data Exchange (ETDEWEB)

    Ford, M.F.

    1975-07-01

    British Gas Corp. points out that a substantial increase in the use of gas in Great Britain's commercial energy market has occurred in the past 6 yr. Some of the newest applications of gas are in the areas of the cook/freeze system of preparing frozen foods in commercial catering, commissariats preparing in-flight food, and heating/cooling systems of large buildings. The variety of buildings and institutions using gas-fired systems indicates that, with the sensible pricing policies and the security of an indigenous fuel, the commercial market for gas will continue to develop for several years in Britain.

  9. Decomposition of dimethylamine gas with dielectric barrier discharge.

    Science.gov (United States)

    Ye, Zhaolian; Zhao, Jie; Huang, Hong ying; Ma, Fei; Zhang, Renxi

    2013-09-15

    The decomposition of dimethylamine (DMA) with gas under high flow rate was investigated with dielectric barrier discharge (DBD) technology. Different parameters including removal efficiency, energy yield, carbon balance and CO2 selectivity, secondary products, as well as pathways and mechanisms of DMA degradation were studied. The experimental results showed that removal efficiency of DMA depended on applied voltage and gas flow rate, but had no obvious correlation with initial concentration. Excellent energy performance was obtained using present DBD technology for DMA abatement. When experiment conditions were controlled at: gas flow rate of 14.9 m(3)/h, initial concentration of 2104 mg/m(3), applied voltage of 4.8 kV, removal efficiency of DMA and energy yield can reach 85.2% and 953.9 g/kWh, respectively. However, carbon balance (around 40%) was not ideal due to shorter residence time (about 0.1s), implying that some additional conditions should be considered to improve the total oxidation of DMA. Moreover, secondary products in outlet gas stream were detected via gas chromatogram-mass spectrum and the amounts of NO3(-) and NO2(-) were analyzed by ion chromatogram. The obtained data demonstrated that NOx might be suppressed due to reductive NH radical form DMA dissociation. The likely reaction pathways and mechanisms for the removal of DMA were suggested based on products analysis. Experimental results demonstrated the application potential of DBD as a clean technology for organic nitrogen-containing gas elimination from gas streams. Copyright © 2013 Elsevier B.V. All rights reserved.

  10. Dynamic development characteristics of amounts of gas and levels of pressure in the Pan-1 coal mine of Huainan

    Institute of Scientific and Technical Information of China (English)

    WANG Ke-xin; FU Xue-hai; ZHOU Ya-nan; HE Ye; WU Heng

    2009-01-01

    The Pan-1 coal mine located in Huainan municipality, Anhui province, is abundant in coal resources. In order to discover the natural conditions of gas in its coal seams, we inverted the burial history of these coal seams using the software of Easy%Ro method and simulated the development process of gas volumes and pressure of the major coal seams using CBMHistory Simulation Software. Our analysis shows that the devolution of gas volumes and levels of pressure can be divided into four stages: I.e., a biogas stage (P1-P3), a pyrolysis gas stage (T1-T2), an active gas enrichment stage (T3-K1) and a gas dissipating stage (K2-present). Cur-rently, the average amounts of gas and gas pressure in coal seams Nos. 13-1,11-2 and 8 of the Pan-1 coal mine are 8.18 m3/t and 2.20 Mpa; 3.89 m3/t and 2.47 Mpa and 6.35 m3/t and 2.89 Mpa, respectively. This agrees very well with current mining data.

  11. Gas surface density, star formation rate surface density, and the maximum mass of young star clusters in a disk galaxy. II. The grand-design galaxy M51

    CERN Document Server

    Gonzalez-Lopezlira, Rosa A; Kroupa, Pavel

    2013-01-01

    We analyze the relationship between maximum cluster mass, and surface densities of total gas (Sigma_gas), molecular gas (Sigma_H_2), neutral gas (Sigma_HI) and star formation rate (Sigma_SFR) in the grand design galaxy M51, using published gas data and a catalog of masses, ages, and reddenings of more than 1800 star clusters in its disk, of which 223 are above the cluster mass distribution function completeness limit. We find for clusters older than 25 Myr that M_3rd, the median of the 5 most massive clusters, is proportional to Sigma_HI^0.4. There is no correlation with Sigma_gas, Sigma_H2, or Sigma_SFR. For clusters younger than 10 Myr, M_3rd is proportional to Sigma_HI^0.6, M_3rd is proportional to Sigma_gas^0.5; there is no correlation with either Sigma_H_2 or Sigma_SFR. The results could hardly be more different than those found for clusters younger than 25 Myr in M33. For the flocculent galaxy M33, there is no correlation between maximum cluster mass and neutral gas, but M_3rd is proportional to Sigma_g...

  12. Biodegradation of organochlorine pesticide endosulfan by bacterial strain Alcaligenes faecalis JBW4.

    Science.gov (United States)

    Kong, Lingfen; Zhu, Shaoyuan; Zhu, Lusheng; Xie, Hui; Su, Kunchang; Yan, Tongxiang; Wang, Jun; Wang, Jinhua; Wang, Fenghua; Sun, Fengxia

    2013-11-01

    The recently discovered endosulfan-degrading bacterial strain Alcaligenesfaecalis JBW4 was isolated from activated sludge. This strain is able to use endosulfan as a carbon and energy source. The optimal conditions for the growth of strain JBW4 and for biodegradation by this strain were identified, and the metabolic products of endosulfan degradation were studied in detail. The maximum level of endosulfan biodegradation by strain JBW4 was obtained using broth at an initial pH of 7.0, an incubation temperature of 40 degreeC and an endosulfan concentration of 100 mg/L. The concentration of endosulfan was determined by gas chromatography. Strain JBW4 was able to degrade 87.5% of alpha-endosulfan and 83.9% of beta-endosulfan within 5 days. These degradation rates are much higher than the previously reported bacterial strains. Endosulfan diol and endosulfan lactone were the major metabolites detected by gas chromatography-mass spectrometry; endosulfan sulfate, which is a persistent and toxic metabolite, was not detected. These results suggested that A. faecalis JBW4 degrades endosulfan via a non-oxidative pathway. The biodegradation of endosulfan by A. faecalis is reported for the first time. Additionally, the present study indicates that strain JBW4 may have potential for the biodegradation of endosulfan residues.

  13. Evaluation of gas production potential from gas hydrate deposits in National Petroleum Reserve Alaska using numerical simulations

    Science.gov (United States)

    Nandanwar, Manish S.; Anderson, Brian J.; Ajayi, Taiwo; Collett, Timothy S.; Zyrianova, Margarita V.

    2016-01-01

    An evaluation of the gas production potential of Sunlight Peak gas hydrate accumulation in the eastern portion of the National Petroleum Reserve Alaska (NPRA) of Alaska North Slope (ANS) is conducted using numerical simulations, as part of the U.S. Geological Survey (USGS) gas hydrate Life Cycle Assessment program. A field scale reservoir model for Sunlight Peak is developed using Advanced Processes & Thermal Reservoir Simulator (STARS) that approximates the production design and response of this gas hydrate field. The reservoir characterization is based on available structural maps and the seismic-derived hydrate saturation map of the study region. A 3D reservoir model, with heterogeneous distribution of the reservoir properties (such as porosity, permeability and vertical hydrate saturation), is developed by correlating the data from the Mount Elbert well logs. Production simulations showed that the Sunlight Peak prospect has the potential of producing 1.53 × 109 ST m3 of gas in 30 years by depressurization with a peak production rate of around 19.4 × 104 ST m3/day through a single horizontal well. To determine the effect of uncertainty in reservoir properties on the gas production, an uncertainty analysis is carried out. It is observed that for the range of data considered, the overall cumulative production from the Sunlight Peak will always be within the range of ±4.6% error from the overall mean value of 1.43 × 109 ST m3. A sensitivity analysis study showed that the proximity of the reservoir from the base of permafrost and the base of hydrate stability zone (BHSZ) has significant effect on gas production rates. The gas production rates decrease with the increase in the depth of the permafrost and the depth of BHSZ. From the overall analysis of the results it is concluded that Sunlight Peak gas hydrate accumulation behaves differently than other Class III reservoirs (Class III reservoirs are composed of a single layer of hydrate with no

  14. Gas Hydrate Storage of Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    Rudy Rogers; John Etheridge

    2006-03-31

    Environmental and economic benefits could accrue from a safe, above-ground, natural-gas storage process allowing electric power plants to utilize natural gas for peak load demands; numerous other applications of a gas storage process exist. A laboratory study conducted in 1999 to determine the feasibility of a gas-hydrates storage process looked promising. The subsequent scale-up of the process was designed to preserve important features of the laboratory apparatus: (1) symmetry of hydrate accumulation, (2) favorable surface area to volume ratio, (3) heat exchanger surfaces serving as hydrate adsorption surfaces, (4) refrigeration system to remove heat liberated from bulk hydrate formation, (5) rapid hydrate formation in a non-stirred system, (6) hydrate self-packing, and (7) heat-exchanger/adsorption plates serving dual purposes to add or extract energy for hydrate formation or decomposition. The hydrate formation/storage/decomposition Proof-of-Concept (POC) pressure vessel and supporting equipment were designed, constructed, and tested. This final report details the design of the scaled POC gas-hydrate storage process, some comments on its fabrication and installation, checkout of the equipment, procedures for conducting the experimental tests, and the test results. The design, construction, and installation of the equipment were on budget target, as was the tests that were subsequently conducted. The budget proposed was met. The primary goal of storing 5000-scf of natural gas in the gas hydrates was exceeded in the final test, as 5289-scf of gas storage was achieved in 54.33 hours. After this 54.33-hour period, as pressure in the formation vessel declined, additional gas went into the hydrates until equilibrium pressure/temperature was reached, so that ultimately more than the 5289-scf storage was achieved. The time required to store the 5000-scf (48.1 hours of operating time) was longer than designed. The lower gas hydrate formation rate is attributed to a

  15. Gas utilisation developments

    Energy Technology Data Exchange (ETDEWEB)

    Kelsall, G.J.; Fantom, I.R.; Laughlin, K.M.; King, R.J.; Watkins, C.J.; Williams, J.D.H.; Blenkin, P. [British Coal Corporation (United Kingdom). Coal Technology Development Division

    1995-08-01

    Advanced coal based power generation systems such as the Air Blown Gasification Cycle (ABGC), formerly known as the CTDD Topping Cycle, offer the potential for high efficiency electricity generation with low environmental impact. An important component of the ABGC development programme has been the determination of alkali metal compounds, dust and other trace contaminant species concentrations that would be contained in the combusted fuel gas presented to the gas turbine. These species are an important factor in the prediction of gas turbine component lifetimes when firing coal derived fuel gas. A project supported under the UK Department of Trade and Industry`s Coal Research and Development programme and the European Communities Commission THERMIE programme, was therefore devised to measure these contaminant species in a purpose built gas cleaning and combustion facility (Gas Utilisation Facility). This facility contained gas cleaning and combustion sytems representative of those that would be used in an ABGC utility application. The objective of this project was therefore to provide data on the level of certain contaminants present in the turbine expansion gas after passing through a low calorific value fuel gas, gas turbine combustor. This fuel gas was produced by the CTDD spouted fluidised bed gasifier and cleaned by filtration at up to 600{degree}C in the purpose built Gas Utilisation Facility. The data has been related to an existing materials test programme associated with the Grimethorpe Topping Cycle Project, which had the objective of predicting gas turbine component lifetimes in utility gas turbine machines. 22 refs., 12 figs., 8 tabs.

  16. Comparative experiments of gas drainage in different types of drillings

    Institute of Scientific and Technical Information of China (English)

    LI Cheng-wu; WEI Shan-yang; WANG Chuan; GAO Tian-bao; FU Yu-kai

    2012-01-01

    Gas drainage effect is the utmost important factor for mining speed and mining safety.It has great meaning to study the effect of gas drainage.Comparative experiment of gas drainage in different types of drillings shows that the initial rate of gas natural emission by hydraulic loosed cross drilling is 1.5 times more than that of parallel drilling,and the drilling gas attenuation coefficients reduces to 0.78 times,the effect of gas drainage is good.The ultimate quantity of gas drainage of parallel drilling,cross drilling,hydraulic loosed cross drilling are 859.1,1 323.5 and 1 833.6 m3/100 m.The results of the measurement through these three kinds of drillings of 100 meters drilling is considered as following:cross drilling is 1.54 times more than that of parallel drillings,hydraulic loosed cross drilling are 2.13 times more than parallel drilling.The drainage rate of parallel drilling,cross drilling and hydraulic loosed cross drilling reached 10% to 15% in 3 months with the pre-draining time.Among these,the drainage effect of hydraulic loosed cross drilling increased by 46% than that of parallel drilling in three months.

  17. Failure Analysis and Evaluation for Weak Roof Performance of 2×104 m3 Vertical Latticed Shell Roof Storage Tank%2万m3立式网壳顶储罐破坏分析及弱顶性能评价

    Institute of Scientific and Technical Information of China (English)

    刘巨保; 门建斌; 丁宇奇; 徐祥娜

    2013-01-01

      按照S H 3046—1992《石油化工立式圆筒形钢制焊接储罐设计规范》,建立了罐壁‐锥板‐蒙皮连接方式的2×104 m3大容量立式网壳顶储罐的空间有限元模型,计算得到了储罐在空罐、半罐、满罐3种工况下的应力分布状态,对储罐进行了强度、破坏和弱顶性能综合评价。根据储罐弱顶性能影响因素的分析计算,提出了使该储罐实现弱顶结构的途径是储罐边缘板厚度由10 m m增大到15 mm或罐顶焊角高度由4 mm减小到3.50 mm。%In accordance with the SH 3046—1992 Petro‐Chemical Design Specification for Ver‐tical Cylindrical Steel Weld Storage Tanks ,to the tank wall‐cone‐plate‐skin connection ,estab‐lishing 2 × 104 m3 vertical lattice roof storage tank spatial finite element model .The stress distri‐bution of empty tank ,half tank and full tank were calculated ,take intensity ,failure and weak roof performance for the comprehensive evaluation .Based on the analysis of influencing factors of the tank weak roof performance ,proposing two ways to achieve the structure of weak roof :the thickness of margin plate increased from 10 mm to 15 mm ,weld bead height of tank deck decrea‐ses from 4 mm to 3 .50 mm .

  18. Hearth Erosion Analysis and Countermeasures of Jinan Steel’s 1750 m3 BF in the Later Stage of Campaign%济钢1750 m3高炉炉役后期炉缸侵蚀分析及对策

    Institute of Scientific and Technical Information of China (English)

    张雷忠; 张国营; 楚强; 王聪; 王洪瑞

    2014-01-01

    Furnace protection practice of Jinan Steel’s No.2 1 750 m3 BF in the later stage of campaign and the hearth erosion model showed that the hearth sidewall erosion was presented large mushroom. The analysis considered that the main reasons of the hearth erosion were the influences of hot metal circulation and high heat flux in the local; In addition, iron notch arrangement with 90° angle and long-term frequent use of cleaning agent exacerbated the hearth erosion. By improving grouting operation and developing local strengthening cooling technology, the cooling effect of the hearth was enhanced. At the same time, by optimizing operation system, the brick lining erosion was mitigated. Therefore, the hearth work safety in the later stage of campaign was ensured.%炉役后期的护炉生产实践以及炉缸侵蚀模型表明,济钢2#1750 m3高炉炉缸侧壁呈现为较大蘑菇型侵蚀。分析认为炉缸侵蚀的主要原因是铁水环流的影响以及炉缸局部热流强度过高;另外,90°的铁口夹角布置以及长期频繁使用洗炉剂也加剧了炉缸的侵蚀。通过改进灌浆操作,开发局部强化冷却技术,提高了炉缸的冷却效果。同时优化操作制度,有效减缓了砖衬的侵蚀,保证了炉役后期炉缸工作本质安全。

  19. Mercury retention in several strains and strain crosses of chickens

    Energy Technology Data Exchange (ETDEWEB)

    Miller, V.L.; Bearse, G.E.; Csonka, E.

    1970-01-01

    The retention of mercury from injections of mercuric chloride was determined in 32 samples of chicks from various strains and strain crosses of egg type stock. The chicks retaining the most mercury had some four times as much mercury in the liver and kidneys as the chicks retaining the lowest amount. The chicks selected for resistance to leukosis retained more mercury than the susceptible chicks within several leukosis breeding programs.

  20. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...