Glypican-3 mRNA expression level in Wilms tumor: correlation with histological type, stage, and outcome.

Science.gov (United States)

Wari, Md Nahidul; Vallonthaiel, Archana George; Ahmed, Aijaz; Saxena, Deepali; Iyer, Venkateswaran K; Mathur, Sandeep R; Agarwala, Sandeep; Bakhshi, Sameer; Srinivas, V; Chattopadhyaya, P; Sharma, Arundhati; Gupta, S Datta; Dinda, Amit

2017-06-01

To correlate expression of Glypican-3 in Wilms tumor with histopathology, stage, and outcome. Glypican-3 mRNA expression by real-time PCR on tumor and normal germline samples from 75 fresh nephrectomies for Wilms tumor with fold change after normalization against GAPDH was compared. Survival analysis for event-free and overall survival (EFS, OS) with 2-year follow-up for Glypican-3 overexpression (>1.5 times) and clinicopathological parameters was performed. Glypican-3 was overexpressed in 37/75 (49.3%). It was overexpressed in 77% (10/13) cases with blastema predominance or anaplastic histology, as compared to 44% of other histologies (27/62) (p = 0.03). OS was 73 and 93%, respectively (p = 0.016), for those with and without GPC-3 overexpression. EFS was not significantly different with Glypican-3 overexpression (p = 0.11). All 5 deaths among blastema predominant tumors and 4/5 deaths among triphasic tumors had overexpressed Glypican-3. Most deaths in Stage IV, Stage III, and Stage I + II (5/7, 3/3, 1/1) had GPC-3 overexpression. On multivariate analysis, only histology and stage were found to have independent prognostic value. Glypican-3 overexpression in Wilms tumor correlates with poor OS on univariate analysis. However, only histology and stage have independent prognostic value. Glypican-3 levels may help to stratify intermediate outcome histology (triphasic) and Stage III Wilms tumors.

Effect of diet on dental development in four species of catarrhine primates.

Science.gov (United States)

Dirks, Wendy

2003-09-01

In this study, dental development is described in two pairs of closely related catarrhine primate species that differ in their degree of folivory: 1) Hylobates lar and Symphalangus syndactylus, and 2) Papio hamadryas hamadryas and Semnopithecus entellus. Growth increments in histological thin sections are used to reconstruct the chronology of dental development to determine how dental development is accelerated in the more folivorous species of each pair. Although anterior tooth formation appears to be unrelated to diet, both S. syndactylus and S. entellus initiate the slowest-forming molar earlier than the related less-folivorous species, which supports the hypothesis that dental acceleration is related to food processing. S. syndactylus initiates M2 crown formation at an earlier age than H. lar, and S. entellus initiates and completes M3 at an earlier age than P. h. hamadryas. Similar stages of M3 eruption occur earlier in the more folivorous species; however, the sex of the individual may also play a role in creating such differences. Although the age at M3 emergence is close to that reported for the end of body mass growth in lar gibbons, hamadryas baboons, and Hanuman langurs, M3 emergence may not be coupled to body mass growth in siamangs. Copyright 2003 Wiley-Liss, Inc.

Optimization of dental implantation

Science.gov (United States)

Dol, Aleksandr V.; Ivanov, Dmitriy V.

2017-02-01

Modern dentistry can not exist without dental implantation. This work is devoted to study of the "bone-implant" system and to optimization of dental prostheses installation. Modern non-invasive methods such as MRI an 3D-scanning as well as numerical calculations and 3D-prototyping allow to optimize all of stages of dental prosthetics. An integrated approach to the planning of implant surgery can significantly reduce the risk of complications in the first few days after treatment, and throughout the period of operation of the prosthesis.

Dental implant customization using numerical optimization design and 3-dimensional printing fabrication of zirconia ceramic.

Science.gov (United States)

Cheng, Yung-Chang; Lin, Deng-Huei; Jiang, Cho-Pei; Lin, Yuan-Min

2017-05-01

This study proposes a new methodology for dental implant customization consisting of numerical geometric optimization and 3-dimensional printing fabrication of zirconia ceramic. In the numerical modeling, exogenous factors for implant shape include the thread pitch, thread depth, maximal diameter of implant neck, and body size. Endogenous factors are bone density, cortical bone thickness, and non-osseointegration. An integration procedure, including uniform design method, Kriging interpolation and genetic algorithm, is applied to optimize the geometry of dental implants. The threshold of minimal micromotion for optimization evaluation was 100 μm. The optimized model is imported to the 3-dimensional slurry printer to fabricate the zirconia green body (powder is bonded by polymer weakly) of the implant. The sintered implant is obtained using a 2-stage sintering process. Twelve models are constructed according to uniform design method and simulated the micromotion behavior using finite element modeling. The result of uniform design models yields a set of exogenous factors that can provide the minimal micromotion (30.61 μm), as a suitable model. Kriging interpolation and genetic algorithm modified the exogenous factor of the suitable model, resulting in 27.11 μm as an optimization model. Experimental results show that the 3-dimensional slurry printer successfully fabricated the green body of the optimization model, but the accuracy of sintered part still needs to be improved. In addition, the scanning electron microscopy morphology is a stabilized t-phase microstructure, and the average compressive strength of the sintered part is 632.1 MPa. Copyright © 2016 John Wiley & Sons, Ltd.

Dental imaging characterization of micropigs

International Nuclear Information System (INIS)

Lee, H.Y.; Choi, M.H.; Chang, J.H.; Jung, J.H.; Kim, M.E.; Lee, N.S.; Kim, J.Y.; Choi, M.C.

2010-01-01

Recently the micropig has been developed as human disease model. The dental and orofacial region of micropig is similar to that of humans, so it has been used for testing implant materials and techniques. The purpose of this study is on dental image at each age using radiography and computed tomography. Total twenty-two male micropigs, two or three animals of each 1, 3, 5, 7, 9, 12, 18 and 24 months old, were given radiographic examinations. After general anesthesia, extra- and intra-oral radiographic technique and computed tomographic scans were performed to assess the dental characterization of micropigs. The total deciduous dental formula comprised 28 teeth and was depicted as Di 3/3, Dc 1/1, Dp 3/3. The total permanent dental formula comprised 44 teeth and was depicted as I 3/3, C 1/1, P 4/4, M 3/3. Hypodontia of the first premolars was common in the micropig. The permanent teeth erupted from 3 to 24 month after birth. The sequence of eruption of the permanent teeth was M1, P1, I3, C, M2, I1 + P3 + P4, P2, I2, M3. Dental imaging enables visualization of the unerupted teeth and gives more information about the development of the teeth. The growth pattern of the teeth obtained through radiographic and computed tomographic examination provides basic data in the micropig as animal model for dental research

Imaging and detection of early stage dental caries with an all-optical photoacoustic microscope

International Nuclear Information System (INIS)

Hughes, D A; Kirk, K J; Sampathkumar, A; Longbottom, C

2015-01-01

Tooth decay, at its earliest stages, manifests itself as small, white, subsurface lesions in the enamel. Current methods for detection in the dental clinic are visual and tactile investigations, and bite-wing X-ray radiographs. These techniques suffer from poor sensitivity and specificity at the earliest (and reversible) stages of the disease due to the small size (<100μm) of the lesion. A fine-resolution (600 nm) ultra-broadband (200 MHz) all-optical photoacoustic microscopy system was is used to image the early signs of tooth decay. Ex-vivo tooth samples exhibiting white spot lesions were scanned and were found to generate a larger (one order of magnitude) photoacoustic (PA) signal in the lesion regions compared to healthy enamel. The high contrast in the PA images potentially allows lesions to be imaged and measured at a much earlier stage than current clinical techniques allow. PA images were cross referenced with histology photographs to validate our experimental results. Our PA system provides a noncontact method for early detection of white-spot lesions with a high detection bandwidth that offers advantages over previously demonstrated ultrasound methods. The technique provides the sensing depth of an ultrasound system, but with the spatial resolution of an optical system

3D-WOVEN FIBER-REINFORCED COMPOSITE FOR CAD/CAM DENTAL APPLICATION.

Science.gov (United States)

Petersen, Richard; Liu, Perng-Ru

2016-05-01

Three-dimensional (3D)-woven noncrimp fiber-reinforced composite (FRC) was tested for mechanical properties in the two principal directions of the main XY plane and compared to different Computer-Aided-Design/Computer-Aided-Machining (CAD/CAM) Dental Materials. The Dental Materials included ceramic with Vitablock Mark II®, ProCAD®, InCeram® Spinel, InCeram® Alumina and InCeram® Zirconia in addition to a resin-based 3M Corp. Paradigm® particulate-filled composite. Alternate material controls included Coors 300 Alumina Ceramic and a tungsten carbide 22% cobalt cermet. The 3D-woven FRC was vacuum assisted resin transfer molding processed as a one-depth-thickness ~19-mm preform with a vinyl-ester resin and cut into blocks similar to the commercial CAD/CAM Dental Materials. Mechanical test samples prepared for a flexural three-point span length of 10.0 mm were sectioned for minimum-depth cuts to compare machinability and fracture resistance between groups. 3D-woven FRC improved mechanical properties with significant statistical differences over all CAD/CAM Dental Materials and Coors Alumina Ceramic for flexural strength (p<0.001), resilience (p<0.05), work of fracture (p<0.001), strain energy release (p<0.05), critical stress intensity factor (p<0.001) and strain (p<0.001).

Diagnostic assessment of skeletal maturity through dental maturation in Hispanic growing individuals

Directory of Open Access Journals (Sweden)

Alejandra Cisternas

2017-01-01

Full Text Available Background: The aim of this study was to explore dental maturation as a diagnostic test for skeletal maturation. Materials and Methods: Six hundred and fifty-seven growing individuals were classified according to their cervical vertebral maturity and dental maturity, both determined in lateral cephalograms and panoramic radiographs, respectively. The correlation between cervical and dental stages was established for each gender. A receiver operating characteristic curve analysis was made, and sensitivity and specificity values were established. Results: Correlation was found between cervical and dental maturation for females (r = 0.73; P<0.001 and males (r = 0.60; P<0.001. Sensitivity for dental Stage F, as an indicator of a postmaturation peak stage, was 87.21% for females and 97.1% for males, whereas specificity for the same stage was 82.92% and 72.3% for females and males, respectively. Conclusions: Dental maturation evaluation could contribute determining whether a patient is in a pre- or post-growth spurt stage.

Impact of dental caries on quality of life among preschool children: emphasis on the type of tooth and stages of progression.

Science.gov (United States)

Ramos-Jorge, Joana; Alencar, Bruna Mota; Pordeus, Isabela Almeida; Soares, Maria Eliza da Consolação; Marques, Leandro Silva; Ramos-Jorge, Maria Letícia; Paiva, Saul Martins

2015-04-01

The aim of this cross-sectional study was to evaluate the impact of dental caries on the quality of life of preschool children and their parents/caretakers, with an emphasis on the type of tooth and stage of progression. A randomly selected sample of preschool children, 3-5 yrs of age, underwent an oral examination for the assessment of dental caries using the International Caries Detection and Assessment System II (ICDAS II) criteria. Parents/caretakers answered two questionnaires, one on the oral health-related quality of life (OHRQoL) of the child [the Early Childhood Oral Health Impact Scale (ECOHIS)], and the other on the socio-economic characteristics of the family. Statistical analyses were performed using the chi-square test, Kruskal-Wallis test, Mann-Whitney U-test, and Poisson regression. A total of 451 preschool children participated in the study. The majority of carious lesions exhibited severe decay (60.6%) and were found in both anterior (incisors/canines) and posterior (molars) teeth. The final Poisson model revealed negative impacts on quality of life from more advanced stages of dental caries, both in incisors/canines and molars. Child's age and household income were also associated with impact on quality of life. Carious lesions in more advanced stages of progression in anterior and posterior teeth were associated with a negative impact on the quality of life of preschool children. © 2014 Eur J Oral Sci.

Infant motivation in dental health: attitude without constant reinforcement.

Science.gov (United States)

Teixeira Alves, Fabiana Bucholdz; Kuhn, Eunice; Bordin, Danielle; Kozlowski, Vitoldo Antonio; Raggio, Daniela Procida; Fadel, Cristina Berger

2014-01-01

Social factors determine the child's behavior and motivation is an important task in the teaching-learning process. This longitudinal and cross-sectional study aimed to analyze the effectiveness of a motivational activity program for oral hygiene habits formation after motivation and without constant reinforcement. The sample was constituted of 26 children (mean 6 years old) from a Public Kindergarten School in Ponta Grossa, PR, Brazil. Data were collected applying a test-chart, with figures reporting the process of dental health/illness. Some figures were considered positive to dental health (dentist/Cod 1, toothbrush/Cod 3, dentifrice/dental floss/Cod 6, fruits/vegetables/Cod 7 and tooth without caries lesion/Cod 8) and negative on dental health (sweets/Cod 2, bacteria/Cod 4, tooth with caries lesion/Cod 5). The figures presentation occurred in three different stages: First stage - figures were presented to children without previous knowledge; second stage - following the motivational presentation, and third stage - 30 days after the first contact. On the first stage, most children select good for the figures considered harmful to their teeth (Cod 2-88%; Cod 4-77% and Cod 5-65%). On the second stage, there was a lower percentage: 23% (P dental care.

Low-dose dental CT

International Nuclear Information System (INIS)

Rustemeyer, P.; Eich, H.T.; John-Mikolajewski, V.; Mueller, R.D.

1999-01-01

Purpose: The intention of this study was to reduce patient dose during dental CT in the planning for osseointegrated implants. Methods and Materials: Dental CTs were performed with a spiral CT (Somatom Plus 4, Siemens) and a dental software package. Use of the usual dental CT technique (120 kVp; 165 mA, 1 s rotation time, 165 mAs; pitch factor 1) was compared with a new protocol (120 kVp; 50 mA; 0.7 s rotation time; 35 mAs; pitch factor 2) which delivered the best image quality at the lowest possible radiation dose, as tested in a preceding study. Image quality was analysed using a human anatomic head preparation. Four radiologists analysed the images independently. A Wilcoxon rank pair-test was used for statistic evaluation. The doses to the thyroid gland, the active bone marrow, the salivary glands, and the eye lens were determined in a tissue-equivalent phantom (Alderson-Rando Phantom) with lithium fluoride thermoluminescent dosimeters at the appropriate locations. Results: By mAs reduction from 165 to 35 and using a pitch factor of 2, the radiation dose could be reduced by a factor of nine (max.) (e.g., the bone marrow dose could be reduced from 23.6 mSv to 2.9 mSv, eye lens from 0.5 mSv to 0.3 mSv, thyroid gland from 2.5 mSv to 0.5 mSv, parotid glands from 2.3 mSv to 0.4 mSv). The dose reduction did not lead to an actual loss of image quality or diagnostic information. Conclusion: A considerable dose reduction without loss of diagnostic information is achievable in dental CT. Dosereducing examination protocols like the one presented may further expand the use of preoperative dental CT. (orig.) [de

[Constructing 3-dimensional colorized digital dental model assisted by digital photography].

Science.gov (United States)

Ye, Hong-qiang; Liu, Yu-shu; Liu, Yun-song; Ning, Jing; Zhao, Yi-jiao; Zhou, Yong-sheng

2016-02-18

To explore a method of constructing universal 3-dimensional (3D) colorized digital dental model which can be displayed and edited in common 3D software (such as Geomagic series), in order to improve the visual effect of digital dental model in 3D software. The morphological data of teeth and gingivae were obtained by intra-oral scanning system (3Shape TRIOS), constructing 3D digital dental models. The 3D digital dental models were exported as STL files. Meanwhile, referring to the accredited photography guide of American Academy of Cosmetic Dentistry (AACD), five selected digital photographs of patients'teeth and gingivae were taken by digital single lens reflex camera (DSLR) with the same exposure parameters (except occlusal views) to capture the color data. In Geomagic Studio 2013, after STL file of 3D digital dental model being imported, digital photographs were projected on 3D digital dental model with corresponding position and angle. The junctions of different photos were carefully trimmed to get continuous and natural color transitions. Then the 3D colorized digital dental model was constructed, which was exported as OBJ file or WRP file which was a special file for software of Geomagic series. For the purpose of evaluating the visual effect of the 3D colorized digital model, a rating scale on color simulation effect in views of patients'evaluation was used. Sixteen patients were recruited and their scores on colored and non-colored digital dental models were recorded. The data were analyzed using McNemar-Bowker test in SPSS 20. Universal 3D colorized digital dental model with better color simulation was constructed based on intra-oral scanning and digital photography. For clinical application, the 3D colorized digital dental models, combined with 3D face images, were introduced into 3D smile design of aesthetic rehabilitation, which could improve the patients' cognition for the esthetic digital design and virtual prosthetic effect. Universal 3D colorized

3D space analysis of dental models

Science.gov (United States)

Chuah, Joon H.; Ong, Sim Heng; Kondo, Toshiaki; Foong, Kelvin W. C.; Yong, Than F.

2001-05-01

Space analysis is an important procedure by orthodontists to determine the amount of space available and required for teeth alignment during treatment planning. Traditional manual methods of space analysis are tedious and often inaccurate. Computer-based space analysis methods that work on 2D images have been reported. However, as the space problems in the dental arch exist in all three planes of space, a full 3D analysis of the problems is necessary. This paper describes a visualization and measurement system that analyses 3D images of dental plaster models. Algorithms were developed to determine dental arches. The system is able to record the depths of the Curve of Spee, and quantify space liabilities arising from a non-planar Curve of Spee, malalignment and overjet. Furthermore, the difference between total arch space available and the space required to arrange the teeth in ideal occlusion can be accurately computed. The system for 3D space analysis of the dental arch is an accurate, comprehensive, rapid and repeatable method of space analysis to facilitate proper orthodontic diagnosis and treatment planning.

Does dental caries affect dental development in children and adolescents?

Science.gov (United States)

Dhamo, Brunilda; Elezi, Besiana; Kragt, Lea; Wolvius, Eppo B; Ongkosuwito, Edwin M

2018-01-01

Although a link between dietary changes, caries, and dental development has been observed, the literature provides little insight about this relationship. The aim of our study was to investigate the association between dental caries and dental development in a clinical sample of Albanian children and adolescents. In total, 118 children and adolescents, born between 1995 and 2004 and aged 6–15 years, were included. Dental caries in the deciduous dentition was assessed using the Decayed, Filled Teeth (dft) index and dental caries in the permanent dentition was assessed using the Decayed, Missing, Filled Teeth (DMFT) index. Dental development during the permanent dentition was determined using the Demirjian method. Linear and ordinal regression models were applied to analyze the associations of dental caries with dental age and developmental stages of each left mandibular tooth. Dental caries in the deciduous dentition, estimated as a median dft of 2.0 (90% range, 0.0–9.1), was significantly associated with lower dental age (β = -0.21; 90% CI: -0.29, -0.12) and with delayed development of the canine, both premolars, and the second molar. Untreated dental caries (dt) was associated with lower dental age (β = -0.19; 90% CI: -0.28, -0.10). Dental caries in the permanent dentition, estimated as a median DMFT of 1.0 (90% range, 0.0–8.0), was not significantly associated with dental age (β = 0.05; 90% CI: -0.04, 0.14). However, the DMFT was associated with the advanced stages of development of both premolars and the second molar. The untreated dental caries in the deciduous dentition delays the development of permanent teeth. PMID:29659350

Dental care protocol based on visual supports for children with autism spectrum disorders.

Science.gov (United States)

Cagetti, Maria Grazia; Mastroberardino, Stefano; Campus, Stefano; Olivari, Benedetta; Faggioli, Raffaella; Lenti, Carlo; Strohmenger, Laura

2015-09-01

Subjects with Autism Spectrum Disorders (ASDs) have often difficulties to accept dental treatments. The aim of this study is to propose a dental care protocol based on visual supports to facilitate children with ASDs to undergo to oral examination and treatments. 83 children (age range 6-12 years) with a signed consent form were enrolled; intellectual level, verbal fluency and cooperation grade were evaluated. Children were introduced into a four stages path in order to undergo: an oral examination (stage 1), a professional oral hygiene session (stage 2), sealants (stage 3), and, if necessary, a restorative treatment (stage 4). Each stage came after a visual training, performed by a psychologist (stage 1) and by parents at home (stages 2, 3 and 4). Association between acceptance rates at each stage and gender, intellectual level, verbal fluency and cooperation grade was tested with chi-square test if appropriate. Seventy-seven (92.8%) subjects overcame both stage 1 and 2. Six (7.2%) refused stage 3 and among the 44 subjects who need restorative treatments, only three refused it. The acceptance rate at each stage was statistically significant associated to the verbal fluency (p=0.02; p=0.04; p=0.01, respectively for stage 1, 3 and 4). In stage 2 all subjects accepted to move to the next stage. The verbal/intellectual/cooperation dummy variable was statistically associated to the acceptance rate (pvisual supports has shown to be able to facilitate children with ASDs to undergo dental treatments even in non-verbal children with a low intellectual level, underlining that behavioural approach should be used as the first strategy to treat patients with ASDs in dental setting.

Analysis of the Early Stages and Evolution of Dental Enamel Erosion.

Science.gov (United States)

Derceli, Juliana Dos Reis; Faraoni, Juliana Jendiroba; Pereira-da-Silva, Marcelo Assumpção; Palma-Dibb, Regina Guenka

2016-01-01

The aim of this study was to evaluate by atomic force microscopy (AFM) the early phases and evolution of dental enamel erosion caused by hydrochloric acid exposure, simulating gastroesophageal reflux episodes. Polished bovine enamel slabs (4x4x2 mm) were selected and exposed to 0.1 mL of 0.01 M hydrochloric acid (pH=2) at 37 ?#61472;?#61616;C using five different exposure intervals (n=1): no acid exposure (control), 10 s, 20 s, 30 s and 40 s. The exposed area was analyzed by AFM in 3 regions to measure the roughness, surface area and morphological surface. The data were analyzed qualitatively. Roughness started as low as that of the control sample, Rrms=3.5 nm, and gradually increased at a rate of 0.3 nm/s, until reaching Rrms=12.5 nm at 30 s. After 40 s, the roughness presented increment of 0.40 nm only. Surface area (SA) increased until 20 s, and for longer exposures, the surface area was constant (at 30 s, SA=4.40 μm2 and at 40 s, SA=4.43 μm2). As regards surface morphology, the control sample presented smaller hydroxyapatite crystals (22 nm) and after 40 s the crystal size was approximately 60 nm. Short periods of exposure were sufficient to produce enamel demineralization in different patterns and the morphological structure was less affected by exposure to hydrochloric acid over 30 s.

Retrospective analysis of 56 edentulous dental arches restored with 344 single-stage implants using an immediate loading fixed provisional protocol: statistical predictors of implant failure.

Science.gov (United States)

Kinsel, Richard P; Liss, Mindy

2007-01-01

The purpose of this retrospective study was to evaluate the effects of implant dimensions, surface treatment, location in the dental arch, numbers of supporting implant abutments, surgical technique, and generally recognized risk factors on the survival of a series of single-stage Straumann dental implants placed into edentulous arches using an immediate loading protocol. Each patient received between 4 and 18 implants in one or both dental arches. Periapical radiographs were obtained over a 2- to 10-year follow-up period to evaluate crestal bone loss following insertion of the definitive metal-ceramic fixed prostheses. Univariate tests for failure rates as a function of age ( or = 60 years), gender, smoking, bone grafting, dental arch, surface type, anterior versus posterior, number of implants per arch, and surgical technique were made using Fisher exact tests. The Cochran-Armitage test for trend was used to evaluate the presence of a linear trend in failure rates regarding implant length and implant diameter. Logistic regression modeling was used to determine which, if any, of the aforementioned factors would predict patient and implant failure. A significance criterion of P = .05 was utilized. Data were collected for 344 single-stage implants placed into 56 edentulous arches (39 maxillae and 17 mandibles) of 43 patients and immediately loaded with a 1-piece provisional fixed prosthesis. A total of 16 implants failed to successfully integrate, for a survival rate of 95.3%. Increased rates of failure were associated with reduced implant length, placement in the posterior region of the jaw, increased implant diameter, and surface treatment. Implant length emerged as the sole significant predictor of implant failure. In this retrospective analysis of 56 consecutively treated edentulous arches with multiple single-stage dental implants loaded immediately, reduced implant length was the sole significant predictor of failure.

Full 3-dimensional digital workflow for multicomponent dental appliances: A proof of concept.

Science.gov (United States)

van der Meer, W Joerd; Vissink, Arjan; Ren, Yijin

2016-04-01

The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. The authors scanned a volunteer's dentition with an intraoral scanner (Lava Chairside Oral Scanner C.O.S., 3M). A digital impression was used to design 2 multicomponent orthodontic appliances. Biocompatible acrylic baseplates were produced with the aid of a 3D printer. The metal springs and clasps were produced by a bending robot. The fit of the 2 appliances was assessed by 2 experienced orthodontists. The authors assessed both orthodontic appliances with the volunteer's dentition and found the fit to be excellent. Clinicians can fully produce a multicomponent dental appliance consisting of both an acrylic baseplate and other parts, such as clasps, springs, or screws, using a digital workflow process without the need for a physical model of the patient's dentition. Plaster models can be superfluous for orthodontic treatment as digital models can be used in all phases of a full digital workflow in orthodontics. The arduous task of making a multicomponent dental appliance that involves bending wires can possibly be replaced by a computer, design software, a 3D printer, and a bending robot. Copyright © 2016 American Dental Association. Published by Elsevier Inc. All rights reserved.

Semaphorin 3A Induces Odontoblastic Phenotype in Dental Pulp Stem Cells.

Science.gov (United States)

Yoshida, S; Wada, N; Hasegawa, D; Miyaji, H; Mitarai, H; Tomokiyo, A; Hamano, S; Maeda, H

2016-10-01

In cases of pulp exposure due to deep dental caries or severe traumatic injuries, existing pulp-capping materials have a limited ability to reconstruct dentin-pulp complexes and can result in pulpectomy because of their low potentials to accelerate dental pulp cell activities, such as migration, proliferation, and differentiation. Therefore, the development of more effective therapeutic agents has been anticipated for direct pulp capping. Dental pulp tissues are enriched with dental pulp stem cells (DPSCs). Here, the authors investigated the effects of semaphorin 3A (Sema3A) on various functions of human DPSCs in vitro and reparative dentin formation in vivo in a rat dental pulp exposure model. Immunofluorescence staining revealed expression of Sema3A and its receptor Nrp1 (neuropilin 1) in rat dental pulp tissue and human DPSC clones. Sema3A induced cell migration, chemotaxis, proliferation, and odontoblastic differentiation of DPSC clones. In addition, Sema3A treatment of DPSC clones increased β-catenin nuclear accumulation, upregulated expression of the FARP2 gene (FERM, RhoGEF, and pleckstrin domain protein 2), and activated Rac1 in DPSC clones. Furthermore, in the rat dental pulp exposure model, Sema3A promoted reparative dentin formation with dentin tubules and a well-aligned odontoblast-like cell layer at the dental pulp exposure site and with novel reparative dentin almost completely covering pulp tissue at 4 wk after direct pulp capping. These findings suggest that Sema3A could play an important role in dentin regeneration via canonical Wnt/β-catenin signaling. Sema3A might be an alternative agent for direct pulp capping, which requires further study. © International & American Associations for Dental Research 2016.

Dental arch relationship in children with complete unilateral cleft lip and palate following Warsaw (one-stage repair) and Oslo protocols.

Science.gov (United States)

Fudalej, Piotr; Hortis-Dzierzbicka, Maria; Dudkiewicz, Zofia; Semb, Gunvor

2009-11-01

To compare the dental arch relationship following one-stage repair of unilateral cleft lip and palate (UCLP) in Warsaw with a matched sample of patients treated by the Oslo Cleft Team. Study models of 61 children (mean age, 11.2; SD, 1.7) with a nonsyndromic complete UCLP consecutively treated with one-stage closure of the cleft at 9.2 months (range, 6.0 to 15.8 months; SD, 2.0) by the Warsaw Cleft Team at the Institute of Mother and Child, Poland, were compared with a sample drawn from a consecutive series of patients with UCLP treated by the Oslo Cleft Team and matched for age, gender, and soft tissue band. The study models were given random numbers to blind their origin. Four examiners rated the dental arch relationship using the GOSLON Yardstick. The strength of agreement of rating was assessed with weighted Kappa statistics. An independent t-test was carried out to compare the GOSLON scores between Warsaw and Oslo samples, and Fisher's exact tests were performed to evaluate the difference of distribution of the GOSLON scores. The intrarater and interrater agreements were high (K > or = .800). No difference in dental arch relationship between Warsaw and Oslo groups was found (mean GOSLON score = 2.68 and 2.65 for Warsaw and Oslo samples, respectively). The distribution of the GOSLON grades was similar in both groups. The dental arch relationship following one-stage repair (Warsaw protocol) was comparable with the outcome of the Oslo Cleft Team's protocol.

Assessment of skeletal age using MP3 and hand-wrist radiographs and its correlation with dental and chronological ages in children.

Science.gov (United States)

Bala, M; Pathak, A; Jain, R L

2010-01-01

The purpose of the study was to assess skeletal age using MP3 and hand-wrist radiographs and to find the correlation amongst the skeletal, dental and chronological ages. One hundred and sixty North-Indian healthy children in the age group 8-14 years, comprising equal number of males and females were included in the study. The children were radiographed for middle phalanx of third finger (MP3) and hand-wrist of the right hand and intra oral periapical X-ray for right permanent maxillary canine. Skeletal age was assessed from MP3 and hand-wrist radiographs according to the standards of Greulich and Pyle. The dental age was assessed from IOPA radiographs of right permanent maxillary canine based on Nolla's calcification stages. Skeletal age from MP3 and hand-wrist radiographs shows high correlation in all the age groups for both sexes. Females were advanced in skeletal maturation than males. Skeletal age showed high correlation with dental age in 12-14 years age group. Chronological age showed inconsistent correlation with dental and skeletal ages.

Stage-specific effects of FGF2 on the differentiation of dental pulp cells

Science.gov (United States)

Sagomonyants, Karen; Mina, Mina

2015-01-01

Dentinogenesis is a complex and multistep process, which is regulated by various growth factors, including members of the Fibroblast Growth Factor (FGF) family. Both positive and negative effects of FGFs on dentinogenesis have been reported but the underlying mechanisms of these conflicting results are still unclear. To gain better insight into the role of FGF2 in dentinogenesis, we used dental pulp cells from various transgenic mice, in which fluorescent protein expression identifies cells at different stages of odontoblast differentiation. Our results showed that continuous exposure of pulp cells to FGF2 inhibited mineralization and revealed both stimulatory and inhibitory effects of FGF2 on expression of markers of dentinogenesis and various transgenes. During the proliferation phase of in vitro growth FGF2 increased expression of markers of dentinogenesis and the percentages of DMP1-GFP+ functional odontoblasts and DSPP-Cerulean+ odontoblasts. Additional exposure to FGF2 during the differentiation/mineralization phase of in vitro growth decreased the extent of mineralization, expression of markers of dentinogenesis, and expression of DMP1-GFP and DSPP-Cerulean transgenes. Recovery experiments showed that the inhibitory effects of FGF2 on dentinogenesis were related to the blocking of differentiation of cells into mature odontoblasts. These observations together showed stage-specific effects of FGF2 on dentinogenesis by dental pulp cells and provide critical information for the development of improved treatments for vital pulp therapy and dentin regeneration. PMID:25823776

Infant motivation in dental health: Attitude without constant reinforcement

Directory of Open Access Journals (Sweden)

Fabiana Bucholdz Teixeira Alves

2014-01-01

Full Text Available Introduction: Social factors determine the child′s behavior and motivation is an important task in the teaching-learning process. This longitudinal and cross-sectional study aimed to analyze the effectiveness of a motivational activity program for oral hygiene habits formation after motivation and without constant reinforcement. Materials and Methods: The sample was constituted of 26 children (mean 6 years old from a Public Kindergarten School in Ponta Grossa, PR, Brazil. Data were collected applying a test-chart, with figures reporting the process of dental health/illness. Some figures were considered positive to dental health (dentist/Cod 1, toothbrush/Cod 3, dentifrice/dental floss/Cod 6, fruits/vegetables/Cod 7 and tooth without caries lesion/Cod 8 and negative on dental health (sweets/Cod 2, bacteria/Cod 4, tooth with caries lesion/Cod 5. The figures presentation occurred in three different stages: First stage - figures were presented to children without previous knowledge; second stage - following the motivational presentation, and third stage - 30 days after the first contact. Results: On the first stage, most children select good for the figures considered harmful to their teeth (Cod 2-88%; Cod 4-77% and Cod 5-65%. On the second stage, there was a lower percentage: 23% (P < 0.0001, 8% (P < 0.0001, and 23% (P = 0.0068 related to the Cod 2, 4, and 5. On the third stage, the results showed again an association with the good choice to these figures considered harmful (Cod 2-85%, Cod 4-65% and Cod 5-54% similar the results obtained on the first stage. Conclusion: The motivational programs performed without constant reinforcement does not have a positive influence in changing the child′s behavior related to a better dental care.

Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of M3 Rotary and M3 Pro Gold NiTi files

Science.gov (United States)

2018-01-01

Objectives To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal (60° angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase. PMID:29765904

99mTc-3PRGD2 scintigraphy to stage liver fibrosis and evaluate reversal after fibrotic stimulus withdrawn

International Nuclear Information System (INIS)

Zhang, Xin; Guo, Qiyong; Shi, Yu; Xu, Weina; Yu, Shupeng; Yang, Zhiguang; Cao, Li; Liu, Changping; Zhao, Zhoushe; Xin, Jun

2017-01-01

Objective: Scintigraphy using 99mTc-3PRGD2 targeting integrin αvβ3 could assess activation of hepatic stellate cells (HSCs). Liver fibrogenesis is intimately associated with activation of HSCs, and the fibrolytic process is accompanied by the reduction of the activated HSCs. In this study, we aimed to evaluate the feasibility of this method to assess the severity of liver fibrosis and the reversal after the fibrotic stimulus withdrawal. Methods: Liver fibrosis of different stages was induced by thioacetamide (TAA) injection for 2, 4 and 6 weeks (n = 6 for each time point). Another 6 rats with 8-week TAA administration (the 8-week group) and 6 rats which were injected with TAA for 6 weeks, and then withdrawn of TAA for 2 weeks (spontaneous recovery rats, SRR) were designed. The ratios of radioactivity detected in the liver vs. the heart at 30 min post-injection of 99m Tc-3PRGD2 (L/H30 min ), the collagen proportionate area (CPA), the protein and mRNA levels of integrin α v , integrin β 3 were analyzed and compared among groups. Results: The Ishak stage scores of the livers in the control and 2, 4, 6-week groups increased when the TAA administration period was extended. L/H30 min increased with the upgrading of liver fibrosis and the differences between each pair of groups were statistically significant (p 30 min in the 8-week group was similar to that in the 6-week group (p > 0.05), but was significantly higher than that in the SRR group (p = 0.005). Conclusions: Scintigraphy using 99m Tc-3PRGD2 may provide a non-invasive method for grading liver fibrosis and assessing liver fibrosis reversal.

Dental age assessment of adolescents and emerging adults in United Kingdom Caucasians using censored data for stage H of third molar roots.

Science.gov (United States)

Boonpitaksathit, Teelana; Hunt, Nigel; Roberts, Graham J; Petrie, Aviva; Lucas, Victoria S

2011-10-01

The root of the third permanent molar is the only dental structure that continues development after completion of growth of the second permanent molar. It is claimed that the lack of a clearly defined end point for completion of growth of the third permanent molar means that this tooth cannot be used for dental age assessment. The aim of this study was to estimate the mean age of attainment of the four stages (E, F, G, and H) of root development of the third molar. The way in which the end point of completion of stage H can be identified is described. A total of 1223 dental panoramic tomographs (DPTs) available in the archives of the Eastman Dental Hospital, London, were used for this study. The ages of the subjects ranged from 12.6 to 24.9 years with 63 per cent of the sample being female. Demirjan's tooth development stages (TDSs), for the first and second molars, were applied to the third molars by a single examiner. For each of stages E, F, and G and for stage H censored data, the mean ages of the males and females were compared, separately within each tooth morphology type using the two sample t-test (P ages of the upper and lower third molars on each side, separately for each gender. The mean age of attainment and the 99 per cent confidence interval (CI) for each TDS were calculated for each third molar. The final stage H data were appropriately censored to exclude data above the age of completion of root growth. The results showed that, for each gender, the age in years at which individuals attained each of the four TDSs was approximately normally distributed. The mean age for appropriately censored data was always lower than the corresponding mean age of the inappropriately censored data for stage H (male UR8 19.57, UL8 19.53, LL8 19.91, and LR8 20.02 and female UR8 20.08, UL8 20.13, LL8 20.78, and LR8 20.70). This inappropriately censored data overestimated the mean age for stage H. The appropriately censored data for the TDSs of the third molar may be

Dosimetry of 99mTc-DD-3B6/22 Fab' for use in staging ovarian cancer

International Nuclear Information System (INIS)

Hetherington, E.; Smith, S.V.; Schmidt, P.F.; Di Bartolo, N.M.; Prabakaran, K.; Femandes, V.; Donaghy, T.; Clingan, P.; Bundesen, P.; Hillyard, C.

1998-01-01

Full text: The diagnostic utility of 99 mTc-DD-3B6/22 Fab'' for staging ovarian cancer in a phase 11 trial is under way. The dose due to 99 mTc- DD-3B6/22 Fab'' was used to estimate the dose for the analogous 188 Re compound for therapy of ovarian cancer. The new agent, 99 mTc-DD-3B6/22 Fab'' (600 mBq) was found to clear rapidly from the blood via the renal system. A ''kidney'' phantom was used to calibrate renal activity. The dose to selected organs was estimated using the MlRDose 2 adult female model. In most cases the kidney uptake accounted for 30% of activity administered. Urine activity was measured directly and the dose calculated assuming a mean volume of 300 mL. All remaining activity was assumed to be uniformly distributed throughout the body. Results show the dose to kidneys, bladder wall and whole body were 4.5-9.1; 1.2-6.3; 0.2-0.3 cGy, respectively. The biological distribution of the 188 Re-DD-3B6/22 Fab'' was assumed to be similar to that of 99 mTc-DD-3B6/22 Fab''. The activity/time data was adjusted for the relative t 1/2 of 99 mTc and 188 Re. The calculated kidney dose due to 188 Re was approx. 800 cGy. As kidney damage from acute radiation nephritis is thought to occur at doses >1000 cGy, this study indicates that provided uptake at tumor site is adequate 188 Re-DD-3B6/22 Fab'' may have a role in therapy of ovarian cancer

Developing a national dental education research strategy: priorities, barriers and enablers.

Science.gov (United States)

Ajjawi, Rola; Barton, Karen L; Dennis, Ashley A; Rees, Charlotte E

2017-03-29

This study aimed to identify national dental education research (DER) priorities for the next 3-5 years and to identify barriers and enablers to DER. Scotland. In this two-stage online questionnaire study, we collected data with multiple dental professions (eg, dentistry, dental nursing and dental hygiene) and stakeholder groups (eg, learners, clinicians, educators, managers, researchers and academics). Eighty-five participants completed the Stage 1 qualitative questionnaire and 649 participants the Stage 2 quantitative questionnaire. Eight themes were identified at Stage 1. Of the 24 DER priorities identified, the top three were: role of assessments in identifying competence; undergraduate curriculum prepares for practice and promoting teamwork. Following exploratory factor analysis, the 24 items loaded onto four factors: teamwork and professionalism, measuring and enhancing performance, dental workforce issues and curriculum integration and innovation. Barriers and enablers existed at multiple levels: individual, interpersonal, institutional structures and cultures and technology. This priority setting exercise provides a necessary first step to developing a national DER strategy capturing multiple perspectives. Promoting DER requires improved resourcing alongside efforts to overcome peer stigma and lack of valuing and motivation. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Wavelet based Image Registration Technique for Matching Dental x-rays

OpenAIRE

P. Ramprasad; H. C. Nagaraj; M. K. Parasuram

2008-01-01

Image registration plays an important role in the diagnosis of dental pathologies such as dental caries, alveolar bone loss and periapical lesions etc. This paper presents a new wavelet based algorithm for registering noisy and poor contrast dental x-rays. Proposed algorithm has two stages. First stage is a preprocessing stage, removes the noise from the x-ray images. Gaussian filter has been used. Second stage is a geometric transformation stage. Proposed work uses two l...

Correlation between dental maturity and cervical vertebral maturity.

Science.gov (United States)

Chen, Jianwei; Hu, Haikun; Guo, Jing; Liu, Zeping; Liu, Renkai; Li, Fan; Zou, Shujuan

2010-12-01

The aim of this study was to investigate the association between dental and skeletal maturity. Digital panoramic radiographs and lateral skull cephalograms of 302 patients (134 boys and 168 girls, ranging from 8 to 16 years of age) were examined. Dental maturity was assessed by calcification stages of the mandibular canines, first and second premolars, and second molars, whereas skeletal maturity was estimated by the cervical vertebral maturation (CVM) stages. The Spearman rank-order correlation coefficient was used to measure the association between CVM stage and dental calcification stage of individual teeth. The mean chronologic age of girls was significantly lower than that of boys in each CVM stage. The Spearman rank-order correlation coefficients between dental maturity and cervical vertebral maturity ranged from 0.391 to 0.582 for girls and from 0.464 to 0.496 for boys (P cervical vertebral maturation stage. The development of the mandibular second molar in females and that of the mandibular canine in males had the strongest correlations with cervical vertebral maturity. Therefore, it is practical to consider the relationship between dental and skeletal maturity when planning orthodontic treatment. Copyright © 2010 Mosby, Inc. All rights reserved.

[Radiodiagnostic methods for dental anomalities].

Science.gov (United States)

Ternovoĭ, S K; Serova, N S; Ivanova, D V

2012-01-01

To determine the capacities of radiologic studies in the examination of patients with dental anomalies. One hundred and twenty patients with dental anomalies were examined. Conventional X-ray and high-technology radiology techniques (multislice spiral computed tomography (MSSCT) and cone-beam computed tomography (CBCT)) were used. Orthopantomography is the most common method for radiologic examination of patients with dental anomalies. However, X-ray procedures do not provide complete information on the position and status of an abnormal tooth, which is required to define further patient management tactics. While planning the management, MSSCT and CBCT were performed in 56 (46.7%) and 64 (53.3%) patients, respectively. In addition, 72 (60.0%) patients in whom orthodontic treatment had been recommended at the first stage underwent MSSCT or CBCT following 7 months. CBCT showed that 4 (3.3%) patients had dental ankylosis previously undiagnosed by MSSCT. The high-technology radiology techniques could assess the position of a tooth in relation to its important anatomic structures and identify the comorbidity that keeps from being treated. MSSCT and CBCT can make in full measure the topical diagnosis of abnormal teeth and hence choose an optimal algorithm for comprehensive treatment of patients.

Cariogram outcome after 90 days of oral treatment with Streptococcus salivarius M18 in children at high risk for dental caries: results of a randomized, controlled study

Directory of Open Access Journals (Sweden)

Di Pierro F

2015-10-01

Full Text Available Francesco Di Pierro,1 Alberto Zanvit,2 Piero Nobili,2 Paolo Risso,3 Carlo Fornaini4 1Scientific Department, Velleja Research, 2Stomatology Institute, Milan, Italy; 3Department of Health Science, University of Genoa, Genoa, Italy; 4Teleo Laboratory, Faculty of Dentistry, University of Nice, Nice, France Abstract: Dental caries is the most common chronic disease of childhood. Cariogram is a well-recognized algorithm-based software program based on different caries-related risk factors and intended to aid clinicians in performing more objective and consistent dental caries risk assessments. This type of approach precedes the diagnosis of caries and allows the dentist to identify at-risk patients and then take appropriate preventive measures before caries develop further. One of the etiological factors favoring the development of dental caries is the mutans streptococci. These acidogenic dental plaque inhabitants can be effectively antagonized by the activity of bacteriocins released by the probiotic Streptococcus salivarius M18 (salivarius M18. Moreover, salivarius M18 after colonizing the human oral mucosa produces the enzymes dextranase and urease that are able to counteract plaque formation and saliva acidity, respectively. Seventy-six subjects at high risk of dental caries were randomized and then either treated or not treated for 90 days with an oral formulation containing the oral probiotic salivarius M18 (Carioblis®. The results indicate that the use of salivarius M18 increases the chances of avoiding new dental caries development in children, and its application could be proposed as a new tool in the dentist's armory to be adopted in subjects considered at high risk on the basis of their Cariogram outcome. Keywords: BLIS M18, caries prediction, dextranase, urease, Streptococcus mutans, Streptococcus sobrinus, plaque, salivary pH, bacteriocins

Nutrient Changes and in Vitro Digestibility in Generative Stage of M10-BMR Sorghum Mutant Lines

Directory of Open Access Journals (Sweden)

R. Sriagtula

2017-08-01

Full Text Available The objective of this research was to investigate the influences of generative stage on crude protein, crude fiber, ash, and crude fat contents as well as in-vitro dry matter and organic matter digestibilities of M-10 BMR sorghum mutant lines. This research was arranged into a randomized block design with 2 factors. The first factor was M-10 BMR sorghum mutant lines (Patir 3.1, Patir 3.2 and Patir 3.7 and the second factor was generative stages (flowering, soft dough and hard dough phase. The observed variables were proximate contents of stem, leaves and panicle of sorghum plant and in-vitro digestibility of whole plant. The results showed that leaves crude protein (CP was more influenced by M-10 BMR sorghum mutant lines. Stems and panicles CP were influenced by the interaction between M-10 BMR sorghum mutant lines and generative stages. Further generative stage reduced stems CP but increased panicles CP. Crude fiber (CF, ash, and ether extract (EE in leaves were not influenced by generative stages. Stems CF was influenced by M-10 BMR sorghum mutant lines and generative stages, while stems EE was more influenced by generative stages. Stems ash content was influenced by the interaction between M-10 BMR sorghum mutant lines and generative stages while panicles ash content was more influenced by generative stages. M-10 BMR sorghum mutant lines and hard dough phase increased in-vitro dry matter and organic matter digestibilities. Based on those findings, it can be concluded that the increased maturity reduces CP and CF contents so it increases in-vitro digestibilities.

Predictors of dental rehabilitation in children aged 3-12 years.

Science.gov (United States)

Gopinath, Vellore Kannan; Awad, Manal A

2015-01-01

The aim of this study was to evaluate the proportion of completed treatments and to study the factors affecting the full mouth dental rehabilitation in pediatric patients treated by undergraduate students at the College of Dental Medicine Teaching Clinics, University of Sharjah. A retrospective study was conducted on 270 children aged less than 12 years (mean age 7.6, SD 2.04). Comprehensive dental rehabilitation reports of child patients that were completed by final year dental undergraduate students from the year 2009 to 2011 were reviewed. Data on complete history, oral examination, dental charting, and treatment plan were collected from pediatric dentistry case sheet. Dental caries was charted using WHO 1997 criteria. Dental treatment needs and completion of dental care delivered to children involved in this study were assessed using DMFT/deft scores. Percentages of treatment provided included completed restorations (94%) and space management (84%) in primary dentition, whereas 98% of restoration and 94% of required sealants were completed in permanent dentition. The percentage of completed dental treatment including sealant placement was 61%. Age of the child and the number of decayed teeth present before the start of the treatment significantly correlated with the children in the incomplete treatment category (P dental care was provided in a holistic approach to the children attending College of Dental Medicine training clinics. Age of the child and the number of decayed teeth were the factors affecting dental rehabilitation in children aged 3-12 years.

Alcohol Inhibits Odontogenic Differentiation of Human Dental Pulp Cells by Activating mTOR Signaling

Directory of Open Access Journals (Sweden)

Wei Qin

2017-01-01

Full Text Available Long-term heavy alcohol consumption could result in a range of health, social, and behavioral problems. People who abuse alcohol are at high risks of seriously having osteopenia, periodontal disease, and compromised oral health. However, the role of ethanol (EtOH in the biological functions of human dental pulp cells (DPCs is unknown. Whether EtOH affects the odontoblastic differentiation of DPCs through the mechanistic target of rapamycin (mTOR remains unexplored. The objective of this study was to investigate the effects of EtOH on DPC differentiation and mineralization. DPCs were isolated and purified from human dental pulps. The proliferation and odontoblastic differentiation of DPCs treated with EtOH were subsequently investigated. Different doses of EtOH were shown to be cytocompatible with DPCs. EtOH significantly activated the mTOR pathway in a dose-dependent manner. In addition, EtOH downregulated the alkaline phosphatase activity, attenuated the mineralized nodule formation, and suppressed the expression of odontoblastic markers including ALP, DSPP, DMP-1, Runx2, and OCN. Moreover, the pretreatment with rapamycin, a specific mTOR inhibitor, markedly reversed the EtOH-induced odontoblastic differentiation and cell mineralization. Our findings show for the first time that EtOH can suppress DPC differentiation and mineralization in a mTOR-dependent manner, indicating that EtOH may be involved in negatively regulating the dental pulp repair.

Alcohol Inhibits Odontogenic Differentiation of Human Dental Pulp Cells by Activating mTOR Signaling.

Science.gov (United States)

Qin, Wei; Huang, Qi-Ting; Weir, Michael D; Song, Zhi; Fouad, Ashraf F; Lin, Zheng-Mei; Zhao, Liang; Xu, Hockin H K

2017-01-01

Long-term heavy alcohol consumption could result in a range of health, social, and behavioral problems. People who abuse alcohol are at high risks of seriously having osteopenia, periodontal disease, and compromised oral health. However, the role of ethanol (EtOH) in the biological functions of human dental pulp cells (DPCs) is unknown. Whether EtOH affects the odontoblastic differentiation of DPCs through the mechanistic target of rapamycin (mTOR) remains unexplored. The objective of this study was to investigate the effects of EtOH on DPC differentiation and mineralization. DPCs were isolated and purified from human dental pulps. The proliferation and odontoblastic differentiation of DPCs treated with EtOH were subsequently investigated. Different doses of EtOH were shown to be cytocompatible with DPCs. EtOH significantly activated the mTOR pathway in a dose-dependent manner. In addition, EtOH downregulated the alkaline phosphatase activity, attenuated the mineralized nodule formation, and suppressed the expression of odontoblastic markers including ALP, DSPP, DMP-1, Runx2, and OCN. Moreover, the pretreatment with rapamycin, a specific mTOR inhibitor, markedly reversed the EtOH-induced odontoblastic differentiation and cell mineralization. Our findings show for the first time that EtOH can suppress DPC differentiation and mineralization in a mTOR-dependent manner, indicating that EtOH may be involved in negatively regulating the dental pulp repair.

Prevalence and factors related to dental caries among pre-school children of Saddar town, Karachi, Pakistan: a cross-sectional study.

Science.gov (United States)

Dawani, Narendar; Nisar, Nighat; Khan, Nazeer; Syed, Shahbano; Tanweer, Navara

2012-12-27

Dental caries is highly prevalent and a significant public health problem among children throughout the world. Epidemiological data regarding prevalence of dental caries amongst Pakistani pre-school children is very limited. The objective of this study is to determine the frequency of dental caries among pre-school children of Saddar Town, Karachi, Pakistan and the factors related to caries. A cross-sectional study of 1000 preschool children was conducted in Saddar town, Karachi. Two-stage cluster sampling was used to select the sample. At first stage, eight clusters were selected randomly from total 11 clusters. In second stage, from the eight selected clusters, preschools were identified and children between 3- to 6-years age group were assessed for dental caries. Caries prevalence was 51% with a mean dmft score being 2.08 (±2.97) of which decayed teeth constituted 1.95. The mean dmft of males was 2.3 (±3.08) and of females was 1.90 (±2.90). The mean dmft of 3, 4, 5 and 6-year olds was 1.65, 2.11, 2.16 and 3.11 respectively. A significant association was found between dental caries and following variables: age group of 4-years (p-value dental plaque (p-value dental caries coupled with a high prevalence of unmet dental treatment needs. Association between caries experience and age of child, consumption of non-sweetened milk, dental plaque and poor oral hygiene had been established.

Dental impressions using 3D digital scanners: virtual becomes reality.

Science.gov (United States)

Birnbaum, Nathan S; Aaronson, Heidi B

2008-10-01

The technologies that have made the use of three-dimensional (3D) digital scanners an integral part of many industries for decades have been improved and refined for application to dentistry. Since the introduction of the first dental impressioning digital scanner in the 1980s, development engineers at a number of companies have enhanced the technologies and created in-office scanners that are increasingly user-friendly and able to produce precisely fitting dental restorations. These systems are capable of capturing 3D virtual images of tooth preparations, from which restorations may be fabricated directly (ie, CAD/CAM systems) or fabricated indirectly (ie, dedicated impression scanning systems for the creation of accurate master models). The use of these products is increasing rapidly around the world and presents a paradigm shift in the way in which dental impressions are made. Several of the leading 3D dental digital scanning systems are presented and discussed in this article.

Development of Three-Dimensional Dental Scanning Apparatus Using Structured Illumination

OpenAIRE

Ahn, Jae Sung; Park, Anjin; Kim, Ju Wan; Lee, Byeong Ha; Eom, Joo Beom

2017-01-01

We demonstrated a three-dimensional (3D) dental scanning apparatus based on structured illumination. A liquid lens was used for tuning focus and a piezomotor stage was used for the shift of structured light. A simple algorithm, which detects intensity modulation, was used to perform optical sectioning with structured illumination. We reconstructed a 3D point cloud, which represents the 3D coordinates of the digitized surface of a dental gypsum cast by piling up sectioned images. We performed ...

Radiographic signs and diagnosis of dental disease

International Nuclear Information System (INIS)

Bellows, J.

1993-01-01

Dental radiographs are critical for the complete assessment and treatment of dental diseases. Dental radiography is commonly used to evaluate congenital dental defects, periodontal disease, orthodontic manipulations, oral tumors, endodontic treatments, oral trauma, and any situation where an abnormality is suspected. Although standard radiographic equipment and film can be used to produce dental radiographs, dental X-ray equipment and film provide superior quality images and greater convenience of animal patient positioning. An understanding of normal dental radiographic anatomy is important when interpreting dental radiographs. Stage III periodontitis is the earliest stage of periodontal disease at which radiographic abnormalities become apparent. Bone loss associated with periodontal disease can be classified as either horizontal or vertical. Periapical radiolucencies can represent granulomas, cysts, or abscesses, whereas periapical radiodensities may represent sclerotic bone or condensing osteitis. Lytic lesions of the bone of the jaw often represent oral neoplasms. Neoplasms also can displace or disrupt teeth in the dental arch. Resorptive lesions can be external or internal and appear as radiolucent areas involving the external surface of the root or the pulp cavity, respectively. Feline dental resorptive lesions, also known as odontoclastic resorptions, are a specific form of dental resorptive lesions unique to cats

M-OSCE as a method to measure dental hygiene students' critical thinking: a pilot study.

Science.gov (United States)

McComas, Martha J; Wright, Rebecca A; Mann, Nancy K; Cooper, Mary D; Jacks, Mary E

2013-04-01

Educators in all academic disciplines have been encouraged to utilize assessment strategies to evaluate students' critical thinking. The purpose of this study was to assess the viability of the modified objective structured clinical examination (m-OSCE) to evaluate critical thinking in dental hygiene education. This evaluation utilized a convenience sample of senior dental hygiene students. Students participated in the m-OSCE in which portions of a patient case were revealed at four stations. The exam consisted of multiple-choice questions intended to measure students' ability to utilize critical thinking skills. Additionally, there was one fill-in-the-blank question and a treatment plan that was completed at the fifth station. The results of this study revealed that the m-OSCE did not reliably measure dental hygiene students' critical thinking. Statistical analysis found no satisfactory reliability within the multiple-choice questions and moderately reliable results within the treatment planning portion of the examination. In addition, the item analysis found gaps in students' abilities to transfer clinical evidence/data to basic biomedical knowledge as demonstrated through the multiple-choice questioning results. This outcome warrants further investigation of the utility of the m-OSCE, with a focus on modifications to the evaluation questions, grading rubric, and patient case.

Is dosimetry still a necessity in current dental practice?

International Nuclear Information System (INIS)

Reddy, S S; Rakesh, N; Clint, Joseph Ben; Sharma, Shivani; Chauhan, Pallavi

2015-01-01

Today, dentists have a wide range of imaging modalities to choose from, the film based techniques, digital techniques, and the recent introduction of 3D volumetric or cone beam computed tomography (CBCT). The inherent design features of the new generation dental x-ray equipment has significantly improved over the years with no evidence of substandard x-ray units in operation. In dental facilities radiological workload is comparatively low, newer radiation equipments and accessories follow safety guidelines and employ better radiation protection measures for the patient and the operator. Dentists’ knowledge and expertise in radiation protection measures is good, enabling them to carry out riskfree radiation procedures in their practice. Therefore, the present study is aimed at assessing the need for dosimeters in current dental scenario.‘Is there currently a significant risk from dental radiography to merit the use of personal dosimetery in dental practice.’Dental health professionals (Oral radiologists) and radiographic assistants of fourteen dental colleges in Karnataka state participated in this questionnaire study. The questionnaire consisted of the following questions—the make, type, year of manufacture of radiographic machines used in their setup, number of radiographs made per day in the institution, type of receptors used, number of personnel at risk for radiation exposure, radiation protection measures used, regular monitoring by personal dosimeters, equivalent dosage readings for the past 12 months and whether the reading of thermoluminescent dosimeters (TLD) for any personnel had exceeded the recommended exposure value in the last 3 years.Dosimetry records of the radiology staff in the last three years shows doses no more than 1.50 mSv per year. The various institutions’ dose (person mSv) was in the range of 3.70 mSv–3.90 mSv.Personal monitoring for Dentists can be omitted in the dental colleges since the estimated dose of oral radiologists

Imaging and detection of early stage dental caries with an all-optical photoacoustic microscope

Science.gov (United States)

Hughes, D. A.; Sampathkumar, A.; Longbottom, C.; Kirk, K. J.

2015-01-01

Tooth decay, at its earliest stages, manifests itself as small, white, subsurface lesions in the enamel. Current methods for detection in the dental clinic are visual and tactile investigations, and bite-wing X-ray radiographs. These techniques suffer from poor sensitivity and specificity at the earliest (and reversible) stages of the disease due to the small size (tooth decay. Ex-vivo tooth samples exhibiting white spot lesions were scanned and were found to generate a larger (one order of magnitude) photoacoustic (PA) signal in the lesion regions compared to healthy enamel. The high contrast in the PA images potentially allows lesions to be imaged and measured at a much earlier stage than current clinical techniques allow. PA images were cross referenced with histology photographs to validate our experimental results. Our PA system provides a noncontact method for early detection of white-spot lesions with a high detection bandwidth that offers advantages over previously demonstrated ultrasound methods. The technique provides the sensing depth of an ultrasound system, but with the spatial resolution of an optical system.

Research on optical properties of dental enamel for early caries diagnostics using a He-Ne laser

Science.gov (United States)

Tang, Jing; Liu, Li; Li, Song-zhan

2008-12-01

A new and non-invasive method adapted for optical diagnosis of early caries is proposed by researching on the interaction mechanism of laser with dental tissue and relations of remitted light with optical properties of the tissue. This method is based on simultaneous analyses of the following parameters: probing radiation, backscattering and auto-fluorescence. Investigation was performed on 104 dental samples in vitro by using He-Ne laser (λ=632.8nm, 2.0+/-0.1mW) as the probing. Spectrums of all samples were obtained. Characteristic spectrums of dental caries in various stages (intact, initial, moderate and deep) were given. Using the back-reflected light to normalize the intensity of back-scattering and fluorescence, a quantitative diagnosis standard for different stages of caries is proposed. In order to verify the test, comparison research was conducted among artificial caries, morphological damaged enamel, dental calculus and intact tooth. Results show that variations in backscattering characteristic changes in bio-tissue morphological and the quantity of auto-fluorescence is correlated with concentration of anaerobic microflora in hearth of caries lesion. This method poses a high potential of diagnosing various stages of dental caries, and is more reliability to detect early caries, surface damage of health enamel and dental calculus.

Thermal properties Forsmark. Modelling stage 2.3 Complementary analysis and verification of the thermal bedrock model, stage 2.

Energy Technology Data Exchange (ETDEWEB)

Sundberg, Jan; Wrafter, John; Laendell, Maerta (Geo Innova AB (Sweden)); Back, Paer-Erik; Rosen, Lars (Sweco AB (Sweden))

2008-11-15

This report present the results of thermal modelling work for the Forsmark area carried out during modelling stage 2.3. The work complements the main modelling efforts carried out during modelling stage 2.2. A revised spatial statistical description of the rock mass thermal conductivity for rock domain RFM045 is the main result of this work. Thermal modelling of domain RFM045 in Forsmark model stage 2.2 gave lower tail percentiles of thermal conductivity that were considered to be conservatively low due to the way amphibolite, the rock type with the lowest thermal conductivity, was modelled. New and previously available borehole data are used as the basis for revised stochastic geological simulations of domain RFM045. By defining two distinct thermal subdomains, these simulations have succeeded in capturing more of the lithological heterogeneity present. The resulting thermal model for rock domain RFM045 is, therefore, considered to be more realistic and reliable than that presented in model stage 2.2. The main conclusions of modelling efforts in model stage 2.3 are: - Thermal modelling indicates a mean thermal conductivity for domain RFM045 at the 5 m scale of 3.56 W/(mK). This is slightly higher than the value of 3.49 W/(mK) derived in model stage 2.2. - The variance decreases and the lower tail percentiles increase as the scale of observation increases from 1 to 5 m. Best estimates of the 0.1 percentile of thermal conductivity for domain RFM045 are 2.24 W/(mK) for the 1 m scale and 2.36 W/(mK) for the 5 m scale. This can be compared with corresponding values for domain RFM029 of 2.30 W/(mK) for the 1 m scale and 2.87 W/(mK)for the 5 m scale. - The reason for the pronounced lower tail in the thermal conductivity distribution for domain RFM045 is the presence of large bodies of the low-conductive amphibolite. - The modelling results for domain RFM029 presented in model stage 2.2 are still applicable. - As temperature increases, the thermal conductivity decreases

Diagnostic reference levels in intraoral dental radiography in Korea

International Nuclear Information System (INIS)

Kim, Eun Kyung; Han, Won Jeong; Choi, Jin Woo; Jung, Yun Hoa; Yoon, Suk Ja; Lee, Jae Seo

2012-01-01

The objectives of this study were to survey the radiographic exposure parameters, to measure the patient doses for intraoral dental radiography nationwide, and thus to establish the diagnostic reference levels (DRLs) in intraoral dental X-ray examination in Korea. One hundred two intraoral dental radiographic machines from all regions of South Korea were selected for this study. Radiographic exposure parameters, size of hospital, type of image receptor system, installation duration of machine, and type of dental X-ray machine were documented. Patient entrance doses (PED) and dose-area products (DAP) were measured three times at the end of the exit cone of the X-ray unit with a DAP meter (DIAMENTOR M4-KDK, PTW, Freiburg, Germany) for adult mandibular molar intraoral dental radiography, and corrections were made for room temperature and pressure. Measured PED and DAP were averaged and compared according to the size of hospital, type of image receptor system, installation duration, and type of dental X-ray machine. The mean exposure parameters were 62.6 kVp, 7.9 mA, and 0.5 second for adult mandibular molar intraoral dental radiography. The mean patient dose was 2.11 mGy (PED) and 59.4 mGycm2 (DAP) and the third quartile one 3.07 mGy (PED) and 87.4 mGycm 2 (DAP). Doses at university dental hospitals were lower than those at dental clinics (p 2 (DAP) as the DRLs in adult mandibular molar intraoral dental radiography in Korea.

Evaluation of radiation effects on dental enamel hardness and dental restorative materials

International Nuclear Information System (INIS)

Adachi, Lena Katekawa; Saiki, Mitiko; Campos, Tomie Nakakuki

2000-01-01

This research presents the results of the microhardness of human dental enamel and of the following dental restorative materials: three dental porcelains - Ceramco II, Finesse and Noritake, and two resin restorative materials - Artglass and Targis, for materials submitted to different times of irradiation at the IEA-R1m nuclear reactor under a thermal neutron flux of 10 12 n cm -2 .s -1 . The results obtained indicated that there is a decrease of the surface microhardness when the enamel is irradiated for 1 h and when dental materials are irradiated for 3 h. However, enamels irradiated for 30 min. did not show significant change of their surface hardness. Therefore, the selection of irradiation time is an important factor to be considered when irradiated teeth or dental materials are used in the investigations of their properties. (author)

The relationship of dental caries and dental fear in Malaysian adolescents: a latent variable approach

Science.gov (United States)

2014-01-01

Background To investigate the role of geography (place of residence) as a moderator in the relationship between dental caries disease and treatment experience and dental fear in 16-year-olds living in Malaysia. Methods A multi-stage-stratified sampling method was employed. Five hundred and three, 16-year-olds from 6 government secondary schools participated in this study. The questionnaire examined participants’ demographic profile and assessed their dental fear using the Dental Fear Survey (DFS). The clinical examination consisted of the DMFT as the outcome measure of dental caries disease and treatment experience by a single examiner (ICC = 0.98). Structural equation modelling inspected the relationship between dental fear and dental caries disease and treatment experience. Results The mean DMFT was 2.76 (SD 3.25). The DT, MT and FT components were 0.64 (SD 1.25), 0.14 (SD 0.56) and 1.98 (SD 2.43) respectively. Rural compared with urban adolescents had significantly greater mean numbers of decayed and missing teeth. The mean DFS score was 40.8 (SD 12.4). Rural compared with urban adolescents had significantly higher mean scores for physical symptoms of dental fear. The correlation between dental fear (DFS) and dental caries disease and treatment experience (DMFT) was 0.29, p dental caries disease and treatment experience. The strength of the relationship between dental fear and dental caries disease and treatment experience varied in accordance with place of residence. Conclusion In conclusion a relationship between dental fear and dental caries disease and treatment experience was shown to exist in 16-year-old adolescents living in Malaysia. This study showed that the rural–urban dichotomy acted as a moderator upon this relationship. PMID:24621226

Radiographic Assessment of Dental Maturation in Children With Dental Agenesis.

Science.gov (United States)

Medina, Aida Carolina; Pozo, Rodrigo Del; de Cedres, Lucila Blanco

Dental agenesis is the most common developmental anomaly in humans, frequently associated with disorders in dental development and maturation. The purpose of this study is to determine radiographic variations in dental maturation in a group of Venezuelan children with dental agenesis. 1,188 panoramic radiographs, from healthy patients ages 5 to 12 years old were studied for agenesis of permanent teeth. Dental maturation was assessed by relative eruption and dental age according to Nolla, comparing children affected with dental agenesis to a stratified control group selected from the same population, excluding children with premature loss of primary teeth in the left quadrants and unclear radiographs. Descriptive analysis, and differences between means and medians (Student t test, Kruskall-Wallis p=0.05) were performed. Medians for Nolla stages were similar between groups, with delay in tooth formation in the agenesis group for second molars (p<0.05) and maxillary lateral incisors and second premolars. Dental age was significantly underestimated for both groups, -0.89 (±0.78) for the control group and -1.20 (±0.95) for the study group. Tooth eruption was similar between groups. Dental age was significantly delayed in Venezuelan children with dental agenesis, with variable significance for tooth formation of studied teeth.

Is dental erosion really a problem?

Science.gov (United States)

Schlueter, N; Jaeggi, T; Lussi, A

2012-09-01

Dental erosion is the non-carious dental substance loss induced by direct impact of exogenous or endogenous acids. It results in a loss of dental hard tissue, which can be serious in some groups, such as those with eating disorders, in patients with gastroesophageal reflux disease, and also in persons consuming high amounts of acidic drinks and foodstuffs. For these persons, erosion can impair their well-being, due to changes in appearance and/or loss of function of the teeth, e.g., the occurrence of hypersensitivity of teeth if the dentin is exposed. If erosion reaches an advanced stage, time- and money-consuming therapies may be necessary. The therapy, in turn, poses a challenge for the dentist, particularly if the defects are diagnosed at an advanced stage. While initial and moderate defects can mostly be treated non- or minimally invasively, severe defects often require complex therapeutic strategies, which often entail extensive loss of dental hard tissue due to preparatory measures. A major goal should therefore be to diagnose dental erosion at an early stage, to avoid functional and esthetic impairments as well as pain sensations and to ensure longevity of the dentition.

Fiducial-based fusion of 3D dental models with magnetic resonance imaging.

Science.gov (United States)

Abdi, Amir H; Hannam, Alan G; Fels, Sidney

2018-04-16

Magnetic resonance imaging (MRI) is widely used in study of maxillofacial structures. While MRI is the modality of choice for soft tissues, it fails to capture hard tissues such as bone and teeth. Virtual dental models, acquired by optical 3D scanners, are becoming more accessible for dental practice and are starting to replace the conventional dental impressions. The goal of this research is to fuse the high-resolution 3D dental models with MRI to enhance the value of imaging for applications where detailed analysis of maxillofacial structures are needed such as patient examination, surgical planning, and modeling. A subject-specific dental attachment was digitally designed and 3D printed based on the subject's face width and dental anatomy. The attachment contained 19 semi-ellipsoidal concavities in predetermined positions where oil-based ellipsoidal fiducial markers were later placed. The MRI was acquired while the subject bit on the dental attachment. The spatial position of the center of mass of each fiducial in the resultant MR Image was calculated by averaging its voxels' spatial coordinates. The rigid transformation to fuse dental models to MRI was calculated based on the least squares mapping of corresponding fiducials and solved via singular-value decomposition. The target registration error (TRE) of the proposed fusion process, calculated in a leave-one-fiducial-out fashion, was estimated at 0.49 mm. The results suggest that 6-9 fiducials suffice to achieve a TRE of equal to half the MRI voxel size. Ellipsoidal oil-based fiducials produce distinguishable intensities in MRI and can be used as registration fiducials. The achieved accuracy of the proposed approach is sufficient to leverage the merged 3D dental models with the MRI data for a finer analysis of the maxillofacial structures where complete geometry models are needed.

Effect of M{sub 3}C on the precipitation behavior of M{sub 23}C{sub 6} phase during early stage of tempering in T91 ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Chenxi; Liu, Yongchang; Zhang, Dantian; Ning, Baoqun; Yan, Zesheng [School of Material Science and Engineering, Tianjin Key Laboratory of Advanced Jointing Technology, Tianjin University, Tianjin (China)

2011-12-15

Tempered martensitic structure is the service condition of T91 ferritic steel after adopting the austenitizing followed by tempering. Needle-like M{sub 3}C particles are precipitated during air cooling after austenization, while the precipitation of M{sub 3}C is suppressed during the water cooling. The effect of existence of M{sub 3}C on the precipitation behaviors of M{sub 23}C{sub 6} during the early stage of tempering, as nucleation site, number density and size distribution, was investigated by means of TEM observation. The TEM results indicate that, upon the same tempering time, the size of M{sub 23}C{sub 6} is smaller and its number density is higher in the sample pre-existing M{sub 3}C than in the sample without M{sub 3}C. This can be explained that existence of M{sub 3}C results in more M{sub 23}C{sub 6} precipitates forming inside of grain, where a relatively low self-diffusion coefficient of alloy element leads to M{sub 23}C{sub 6} hardly coarsening. However, with the prolongation of tempering time, this effect becomes weaken. Microhardness results indicate that the existence of M{sub 3}C phase results in the increase of hardness after tempering due to the precipitation of finer and denser M{sub 23}C{sub 6} particles. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Identification of Cells at Early and Late Stages of Polarization During Odontoblast Differentiation Using pOBCol3.6GFP and pOBCol2.3GFP Transgenic Mice

Science.gov (United States)

Balic, Anamaria; Aguila, H. Leonardo; Mina, Mina

2010-01-01

Transgenic mouse lines in which GFP expression is under the control of tissue-and stage specific promoters have provided powerful experimental tools for identification and isolation of cells at specific stage of differentiation along a lineage. In the present study we used primary cell cultures derived from the dental pulp from pOBCol3.6GFP and pOBCol2.3GFP transgenic mice as a model to develop markers for early stages of odontoblast differentiation from progenitor cells. We analyzed the temporal and spatial expression of 2.3-GFP and 3.6-GFP during in vitro mineralization. Using FACS to separate cells based on GFP expression, we obtained relatively homogenous sub-populations of cells and analyzed their dentinogenic potentials and their progression into odontoblasts. Our observations showed that these transgenes were activated before the onset of matrix deposition and in cells at different stages of polarization. The 3.6-GFP transgene was activated in cells in early stages of polarization whereas the 2.3-GFP transgene was activated at a later stage of polarization just before or at the time of formation of secretory odontoblast. PMID:20728593

Dental age estimation from the developmental stage of the third molars in western Chinese population.

Science.gov (United States)

Li, Guo; Ren, Jiayin; Zhao, Shuping; Liu, Yuanyuan; Li, Na; Wu, Wanhong; Yuan, Shanshan; Wang, Hu

2012-06-10

The purpose of this study is to provide reference data about estimating dental age from third molars of the western Chinese population for comparing with other populations and being applied to the age estimation of western Chinese juveniles and adolescents. A total of 2078 digital panoramic radiographs of 989 male and 1089 female Chinese subjects aged between 5 and 23 years were examined. The mineralization status of the third molars was assessed using the formation stages described by Demirjian et al. with two modifications. The results showed that the development of third molars in the western Chinese population was likely to begin at age 5 in both males and females. The third molars 28 and 48 showed significantly higher frequency in females than in males. The third molars 18 in the stage 1, 38 in the stages 1, A and G, and 48 in the stage H showed significantly older average age in females than in males. The Demirjian's stages C and D could be used as a reference stage to determine dichotomously whether a western Chinese is more likely to be under or above age 14 or 16, respectively. This study provided reference data for the age estimation of western Chinese juveniles and adolescents by the mineralization stages of the third molar. Apart from forensic age determination in living subjects, the presented reference data can also be used for age estimations of unidentified corpses and skeletons. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

Dental arch relationship in children with complete unilateral cleft lip and palate following warsaw (one-stage repair) and oslo protocols.

NARCIS (Netherlands)

Fudalej, P.S.; Hortis-Dzierzbicka, M.; Dudkiewicz, Z.; Semb, G.

2009-01-01

OBJECTIVE: To compare the dental arch relationship following one-stage repair of unilateral cleft lip and palate (UCLP) in Warsaw with a matched sample of patients treated by the Oslo Cleft Team. MATERIAL: Study models of 61 children (mean age, 11.2; SD, 1.7) with a nonsyndromic complete UCLP

Prophylactic antibiotic therapy prior to dental treatment for patients with end-stage renal disease.

Science.gov (United States)

Werner, C W; Saad, T F

1999-01-01

In the United States, there is a large and growing population of patients undergoing dialysis because of end-stage renal disease (ESRD). These patients present special management considerations for dentists, including antibiotic prophylaxis for the prevention of bacterial endocarditis (BE). ESRD patients, particularly those with an arteriovenous shunt for hemodialysis access, are predisposed to valvular endocarditis. Thus, BE prevention is the primary goal of antibiotic prophylaxis prior to dental or other invasive procedures in these patients. Bacteremia may predispose to infection of synthetic vascular access grafts, although this form of endovascular infection in ESRD patients has not been as well-characterized as BE. Antibiotic prophylaxis may be of some benefit for prevention of synthetic graft infections as well as BE. Poor dentist and physician compliance with BE prophylaxis regimens, as well as errors in dosing, timing, or duration of prophylaxis, have been reported. These problems are of particular concern in the treatment of chronically ill patients. In this article, we review the rationale for prophylactic antibiotic therapy prior to dental procedures in ESRD patients with vascular access. We also elaborate on the current American Heart Association guidelines for BE prophylaxis, and address special considerations for ESRD patients.

Effects of Dental 3D Multimedia System on the Performance of Junior Dental Students in Preclinical Practice: A Report from China

Science.gov (United States)

Hu, Jian; Yu, Hao; Shao, Jun; Li, Zhiyong; Wang, Jiawei; Wang, Yining

2009-01-01

Background: Computer-assisted tools are rarely adopted for dental education in China. In China, 3D digital technology, such as Virtual Reality Systems, are often rejected in the dental field due to prohibitive pricing. There is also a reluctance to move away from traditional patterns of dental education. Objective: The current study is one of a…

Reference dose levels for dental panoramic radiography in Anyang City

International Nuclear Information System (INIS)

Han, Mi Ra; Kang, Byung Cheol; Yoon, Suk Ja; Lee, Jae Seo; Kim, Young Hee

2009-01-01

To measure dose-width product (DWP) values used for dental panoramic radiography in Anyang city, Korea. Thirty-six panoramic dental radiographic sets (17 analogue panoramic sets and 19 digital panoramic sets) in 36 dental clinics in Anyang city were included in the study. Each patient's panoramic exposure parameters were simulated and the panoramic radiation doses were measured at the secondary collimator using a Mult-O-Meter (Unfors Instruments, Billdal, Sweden) at each dental clinic during 2006. The third quartile DWP was determined from 310 surface dose measurements on adult. The third quartile DWP for adult panoramic radiograph was 106.7 mGy mm. For analogue and digital panoramic radiograph, 3/4 DWP were 116.8 mGy mm and 72 mGy mm respectively. The overall third quartile DWP of panoramic radiography was 106.7 mGy mm. The measured 3/4 DWPs were higher than the 3/4 DWP of 65 mGy mm recommended by NRPB. Dentists who are operating above the reference dose should lower their panoramic exposure doses below the recommended reference value by changing the exposure parameters and/or their panoramic equipment.

Dental MRI using a dedicated RF-coil at 3 Tesla.

Science.gov (United States)

Prager, Marcel; Heiland, Sabine; Gareis, Daniel; Hilgenfeld, Tim; Bendszus, Martin; Gaudino, Chiara

2015-12-01

To assess the benefit of a dedicated surface coil to visualize dental structures in comparison to standard head/neck coil. Measurements were performed using the standard head/neck coil and a dedicated array coil for dental MRI at 3 T. As MRI methods, we used a T1-weighted spin-echo sequence with and without spectral fat saturation, a T2-weighted turbo-spin-echo sequence and a 3-dimensional T2-weighted SPACE sequence. Measurements were performed in a phantom to examine sensitivity profiles. Then the signal gain in dental structures was examined in volunteers and in a patient. As expected for a surface coil, the signal gain of the dental coil was highest at the surface of the phantom and decreased with increasing distance to the coil; it was >120% even at a depth of 30 mm, measured from the centre of the coil. The signal gain within the pulp of the volunteers ranged between 236 and 413%. The dedicated array coil offers a significantly higher signal within the region of interest for dental MR imaging thus allowing for better depiction of pathologies within the periodontium and for delineation and tracking of the branches of the maxillary and mandibular nerves. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

[Maintenance care for dental implant].

Science.gov (United States)

Kamoi, K

1989-10-01

Dental implant has tried at the early stage in 19th century recovering an oral function and esthetics. Technological revolutions in biochemical and new materials have developed on the remarkable change in the dental implants, nowadays we call the three generation therapy for dental implantology. There are many kinds of methods and techniques in dental implants, however a lot of troublesome complication on the process of surgical phase, construction of prothodontics and prognosis of maintenance care. In the proceedings of this symposium, I would like to propose you how to manage the maintenance care for various kind of dental implants through the methodology and case presentations. Tendenay and future for dental implants The current outlook of dental implant has increasing supply and demand not only dentists but also patients. According to Japanese Welfare Ministry's report in 1987, average missing teeth over sixty years old generations are approximately 42% in accordance with NIDR (U.S.A.) research. They are missed on ten over teeth in full 28th teeth dentitions owing to dental caries and periodontal diseases. Generally speaking, latent implant patients are occupied on the same possibility of needs for dental implants both Japan and U.S.A. Management of maintenance care The patients hardly recognized the importance of plaque control for the maintenance care in the intraoral condition after implantation. Dentists and dental staffs must be instruct patients for importance of plaque removal and control, because they already had forgotten the habit of teeth cleaning, especially in the edenturous conditions. 1) Concept of establishment in oral hygiene. Motivation and instruction for patients include very important factors in dental implants as well as in periodontal diseases. Patients who could not achieve on good oral hygiene levels obtained no good results in the long term observations. To establish good oral hygiene are how to control supra plaque surrounding tissues

99mTc-EDDA/HYNIC-octreotate scintigraphy, an efficient method for the detection and staging of carcinoid tumours: results of 3 years' experience.

Science.gov (United States)

Hubalewska-Dydejczyk, A; Fröss-Baron, K; Mikołajczak, R; Maecke, H R; Huszno, B; Pach, D; Sowa-Staszczak, A; Janota, B; Szybiński, P; Kulig, J

2006-10-01

At all stages of the disease, serious difficulties are encountered in the imaging diagnosis of carcinoids. Somatostatin receptor scintigraphy (SRS) holds great promise for detecting primary tumours and metastases. 99mTc-EDDA/HYNIC-octreotate should significantly improve the diagnosis of carcinoids in comparison with 111In-Octreoscan owing to the better affinity for SSR2 and the higher count rate. The aim of this study was to assess the diagnostic efficiency of 99mTc-EDDA/HYNIC-octreotate scintigraphy in the detection and staging of carcinoid tumours. The study population comprised 75 patients (age 48.5+/-15.5 years): 46 with histological confirmation of carcinoid and 29 with suspected disease. 99mTc-EDDA/HYNIC-octreotate (740 MBq) SRS and CT were performed in all patients. Fifteen patients were examined with 111In-Octreoscan. High-quality 99mTc-EDDA/HYNIC-octreotate images were obtained in all cases, with maximum tumour tracer accumulation 4 h p.i. The mean target/non-target ratios for whole body (WB) and SPECT scans were, respectively, as follows: primary lesions: 4.5 and 10.2; metastases: liver, 3.1 and 12.3; abdominal focal lesions, 2.7 and 5.8; lung, 2.7 and 8.3; mediastinum, 3.4 and 7.6; bones, 6.8 and 19.0. 99mTc-EDDA/HYNIC-octreotate WB scans revealed more metastases than 111In-Octreoscan, with better individual separation. 99mTc-EDDA/HYNIC-octreotate SRS revealed new metastatic lesions in seven patients with confirmed carcinoid, and in four with dissemination the primary focus was found. Five patients qualified for radioguided surgery and 11 were referred to 90Y-DOTA-TATE therapy. The sensitivity of SRS in comparison with CT was higher for primary lesions and liver and abdominal lymph node metastases. In the subgroup of patients with suspected neuroendocrine tumours, two duodenal carcinoids, one thymic carcinoid and one ileal carcinoid were found. 99mTc-EDDA/HYNIC-octreotate, with high imaging quality, is an excellent alternative to 111In-Octreoscan for

99mTc-EDDA/HYNIC-octreotate scintigraphy, an efficient method for the detection and staging of carcinoid tumours: results of 3 years' experience

International Nuclear Information System (INIS)

Hubalewska-Dydejczyk, A.; Froess-Baron, K.; Huszno, B.; Pach, D.; Sowa-Staszczak, A.; Mikolajczak, R.; Janota, B.; Maecke, H.R.; Szybinski, P.; Kulig, J.

2006-01-01

At all stages of the disease, serious difficulties are encountered in the imaging diagnosis of carcinoids. Somatostatin receptor scintigraphy (SRS) holds great promise for detecting primary tumours and metastases. 99m Tc-EDDA/HYNIC-octreotate should significantly improve the diagnosis of carcinoids in comparison with 111 In-Octreoscan owing to the better affinity for SSR2 and the higher count rate. The aim of this study was to assess the diagnostic efficiency of 99m Tc-EDDA/HYNIC-octreotate scintigraphy in the detection and staging of carcinoid tumours. The study population comprised 75 patients (age 48.5±15.5 years): 46 with histological confirmation of carcinoid and 29 with suspected disease. 99m Tc-EDDA/HYNIC-octreotate (740 MBq) SRS and CT were performed in all patients. Fifteen patients were examined with 111 In-Octreoscan. High-quality 99m Tc-EDDA/HYNIC-octreotate images were obtained in all cases, with maximum tumour tracer accumulation 4 h p.i. The mean target/non-target ratios for whole body (WB) and SPECT scans were, respectively, as follows: primary lesions: 4.5 and 10.2; metastases: liver, 3.1 and 12.3; abdominal focal lesions, 2.7 and 5.8; lung, 2.7 and 8.3; mediastinum, 3.4 and 7.6; bones, 6.8 and 19.0. 99m Tc-EDDA/HYNIC-octreotate WB scans revealed more metastases than 111 In-Octreoscan, with better individual separation. 99m Tc-EDDA/HYNIC-octreotate SRS revealed new metastatic lesions in seven patients with confirmed carcinoid, and in four with dissemination the primary focus was found. Five patients qualified for radioguided surgery and 11 were referred to 90 Y-DOTA-TATE therapy. The sensitivity of SRS in comparison with CT was higher for primary lesions and liver and abdominal lymph node metastases. In the subgroup of patients with suspected neuroendocrine tumours, two duodenal carcinoids, one thymic carcinoid and one ileal carcinoid were found. 99m Tc-EDDA/HYNIC-octreotate, with high imaging quality, is an excellent alternative to 111 In

Dental erosion among children aged 3-6 years and its associated indicators.

Science.gov (United States)

Tao, Dan-Ying; Hao, Gu; Lu, Hai-Xia; Tian, Yu; Feng, Xi-Ping

2015-01-01

To analyze the status quo of dental erosion in 3- to 6-year-old children in Shanghai. A stratified, cluster, multistage random sampling methods was applied to 3- to 6-year-old children in Shanghai in 2012. Both questionnaire and clinical oral examination were performed in the survey. The questionnaire included general information, such as age, gender, parental education, dietary habit, oral health behavior, general medical health, and socioeconomic status. The clinical examination focused on the eroded tooth surface and dental erosion extent. SPSS v19.0 software package was utilized for statistical analysis. A total of 1,837 children aged 3-6 years were randomly selected in Shanghai. The overall dental erosion prevalence was 15.1 percent. Among different age groups, a relatively high prevalence of 17.1 percent was found in the 4-year-old group, and a relatively low prevalence of 12.0 percent was observed in the 3-year-old group. Surprisingly, there was no significant difference among the four age groups. The occurrence of dental erosion was influenced by habits of vinegar/coffee/tea consumption, mother's educational background, birthplace, and regurgitation (P dental erosion prevalence in 3- to 6-year-old children in Shanghai appears to be close to that of other Chinese provinces as well as that observed in most of surveys carried out in different parts of the world. Efforts should be made to raise public awareness about the disease. Moreover, further studies targeted to explore the relationship between dental erosion and risk factors are needed. It is also necessary to establish a unified diagnostic standard for future epidemiological investigations. © 2015 American Association of Public Health Dentistry.

Site characterization and validation - Borehole radar investigations stage 3

International Nuclear Information System (INIS)

Sandberg, E.; Olsson, O.; Falk, L.

1989-11-01

The borehole radar investigation program Stage 3 of the SCV-site has comprised single hole reflection measurements with centre frequencies of 22 and 60 MHz. Single hole reflection measurement with both omni-directional and directional antennas have been performed in the boreholes C1, C2, C3 and the D-holes. Crosshole tomographic measurements as well as cross- hole reflection measurement have been made between the bore- holes C1-C2, W1-C1 and W1-C2. The range obtained in the single hole reflection measurements was approximately 100 m for the lower frequency and about 60-70 m for the centre frequency 60 MHz. In the crosshole measurements transmitter-receiver separations from 20 to 120 m have been used. The Stage 3 radar investigations have essentially confirmed the three dimensional description of the structures at the SCV-site. The conceptual model of the site which was produced based on the Stage 1 data included three major zones, two minor zones and a circular feature. The major features are considered to be the most significant at the site and are all observed in the Stage 3 boreholes close to their predicted locations. The circular feature has also been found in two of the additional tomograms at the predicted location. The results indicate that the zones are not homogeneous but rather that they are highly irregular containing parts of considerably increased fracturing and parts where their contrast to the background rock is quite small. The zones appear to be approximately planar at least at the scale of the site. At a smaller scale the zones can appear quite irregular

Awareness of dental implants among dental patients in Nigeria ...

African Journals Online (AJOL)

The aim of this study was to determine the level of awareness of dental implant in Nigerian patients and their willingness to choose dental implant as a tooth replacement option. A survey was conducted among patients presenting for dental treatment in 3 teaching hospitals and private dental clinics in 3 urban cities of ...

Cervical vertebral and dental maturity in Turkish subjects.

Science.gov (United States)

Başaran, Güvenç; Ozer, Törün; Hamamci, Nihal

2007-04-01

The aim of this study was to investigate the relationships between the stages of calcification of teeth and the cervical vertebral maturity stages in Turkish subjects. A retrospective cross-sectional study was designed. The final study population consisted of 590 Turkish subjects. Statistical analysis of the data was performed with computer software. Spearman rank order correlation coefficients were used to assess the relationship between cervical vertebral and dental maturation. For a better understanding of the relationship between cervical vertebral maturation indexes and dental age, percentage distributions of the studied teeth were also calculated. Strict correlations were found between dental and cervical vertebral maturation of Turkish subjects. For males, the sequence from lowest to the highest was third molar, central incisor, canine, first premolar, second premolar, first molar, and second molar. For females, the sequence from lowest to the highest was third molar, canine, second premolar, first premolar, central incisor, first molar, and second molar. Dental maturation stages can be used as a reliable indicator of facial growth.

Improving osseointegration of dental implants.

Science.gov (United States)

Elias, Carlos Nelson; Meirelles, Luiz

2010-03-01

In the beginning of implantology, the procedures adopted for treating patients were performed in two surgical phases with an interval of 3-6 months. Nowadays, it is possible to insert and load a dental implant in the same surgical procedure. This change is due to several factors, such as improvement of surgical technique, modifications of the implant design, increased quality of implant manufacturing, development of the surgical instruments' quality, careful patient screening and adequate treatment of the implant surface. The clinical results show that adequate treatment of surfaces is crucial for reducing healing time and treating at-risk patients. The surface properties of dental implants can be significantly improved at the manufacturing stage, affecting cells' activity during the healing phase that will ultimately determine the host tissue response, a fundamental requirement for clinical success. This review focuses on different types of dental implant surfaces and the influence of surface characteristics on osseointegration.

Evaluation of radiation effects on dental enamel hardness and dental restorative materials; Avaliacao do efeito da irradiacao na dureza do esmalte dental e de materiais odontologicos

Energy Technology Data Exchange (ETDEWEB)

Adachi, Lena Katekawa; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Supervisao de Radioquimica; Campos, Tomie Nakakuki [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Protese

2000-07-01

This research presents the results of the microhardness of human dental enamel and of the following dental restorative materials: three dental porcelains - Ceramco II, Finesse and Noritake, and two resin restorative materials - Artglass and Targis, for materials submitted to different times of irradiation at the IEA-R1m nuclear reactor under a thermal neutron flux of 10{sup 12}n cm{sup -2}.s{sup -1} . The results obtained indicated that there is a decrease of the surface microhardness when the enamel is irradiated for 1 h and when dental materials are irradiated for 3 h. However, enamels irradiated for 30 min. did not show significant change of their surface hardness. Therefore, the selection of irradiation time is an important factor to be considered when irradiated teeth or dental materials are used in the investigations of their properties. (author)

3D printed versus conventionally cured provisional crown and bridge dental materials.

Science.gov (United States)

Tahayeri, Anthony; Morgan, MaryCatherine; Fugolin, Ana P; Bompolaki, Despoina; Athirasala, Avathamsa; Pfeifer, Carmem S; Ferracane, Jack L; Bertassoni, Luiz E

2018-02-01

To optimize the 3D printing of a dental material for provisional crown and bridge restorations using a low-cost stereolithography 3D printer; and compare its mechanical properties against conventionally cured provisional dental materials. Samples were 3D printed (25×2×2mm) using a commercial printable resin (NextDent C&B Vertex Dental) in a FormLabs1+ stereolithography 3D printer. The printing accuracy of printed bars was determined by comparing the width, length and thickness of samples for different printer settings (printing orientation and resin color) versus the set dimensions of CAD designs. The degree of conversion of the resin was measured with FTIR, and both the elastic modulus and peak stress of 3D printed bars was determined using a 3-point being test for different printing layer thicknesses. The results were compared to those for two conventionally cured provisional materials (Integrity ® , Dentsply; and Jet ® , Lang Dental Inc.). Samples printed at 90° orientation and in a white resin color setting was chosen as the most optimal combination of printing parameters, due to the comparatively higher printing accuracy (up to 22% error), reproducibility and material usage. There was no direct correlation between printing layer thickness and elastic modulus or peak stress. 3D printed samples had comparable modulus to Jet ® , but significantly lower than Integrity ® . Peak stress for 3D printed samples was comparable to Integrity ® , and significantly higher than Jet ® . The degree of conversion of 3D printed samples also appeared higher than that of Integrity ® or Jet ® . Our results suggest that a 3D printable provisional restorative material allows for sufficient mechanical properties for intraoral use, despite the limited 3D printing accuracy of the printing system of choice. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

{sup 99m}Tc-3PRGD{sub 2} SPECT to monitor early response to neoadjuvant chemotherapy in stage II and III breast cancer

Energy Technology Data Exchange (ETDEWEB)

Ji, Bin; Chen, Bin; Wang, Ting; Chen, Minglong; Ji, Tiefeng; Gao, Shi; Ma, Qingjie [China-Japan Union Hospital of Jilin University, Department of Nuclear Medicine, Changchun (China); Song, Yan [China-Japan Union Hospital of Jilin University, Department of Breast Surgery, Changchun (China); Wang, Xueju [China-Japan Union Hospital of Jilin University, Department of Pathology, Changchun (China)

2015-08-15

Monitoring of response to neoadjuvant chemotherapy (NCT) is important for optimal management of patients with breast cancer. {sup 99m}Tc-3PRGD{sub 2} SPECT is a newly developed imaging modality for evaluating tumor vascular status. In this study, we investigated the application of {sup 99m}Tc-3PRGD{sub 2} SPECT in evaluating therapy response to NCT in patients with stage II or III breast cancer. Thirty-three patients were scheduled to undergo {sup 99m}Tc-3PRGD{sub 2} SPECT at baseline, after the first and second cycle of NCT. Four patients had extremely low {sup 99m}Tc-3PRGD{sub 2} uptake at baseline, and were not included in the subsequent studies. Changes in tumor to nontumor (T/N) ratio were compared with pathological tumor responses classified using the residual cancer burden system. Receiver operator characteristic analysis was used to compare the power to identify responders between the end of the first and the end of the second cycle of NCT. The impact of breast cancer subtype on {sup 99m}Tc-3PRGD{sub 2} uptake was evaluated. The correlation between {sup 99m}Tc-3PRGD{sub 2} uptake and pathological tumor response was also evaluated in each breast cancer subtype. Surgery was performed after four cycles of NCT and pathological analysis revealed 18 responders and 15 nonresponders. In patients with clearly visible {sup 99m}Tc-3PRGD{sub 2} uptake at baseline, the sensitivity, specificity, and negative predictive value of {sup 99m}Tc-3PRGD{sub 2} SPECT were 86.7 %, 85.7 % and 86.7 % after the first cycle of NCT, and 92.9 %, 93.3 % and 93.3 % after the second cycle, respectively. Among these patients, the HER-2-positive group demonstrated both higher T/N ratios and a greater change in T/N ratio than patients with other breast cancer subtypes (P < 0.05). A strong correlation was found between changes in T/N ratio and pathological tumor response in the HER-2-positive group (P < 0.03). {sup 99m}Tc-3PRGD{sub 2} SPECT seems to be useful for determining the pathological

Restorative Rehabilitation of a Patient with Dental Erosion

OpenAIRE

AlShahrani, Mohammed Thamer; Haralur, Satheesh B.; Alqarni, Mohammed

2017-01-01

Dental erosion is the chemical dissolution of the tooth structure. Factors like eating disorders and gastrointestinal diseases are recognized as intrinsic factors for dental erosion. Advanced stages of dental erosion extensively damage the tooth morphology, consequently affecting both esthetics and functions. Reports indicate the growing prevalence of erosion, and hence knowledge of restorative rehabilitation of tooth erosion is an integral part of the contemporary dental practice. This clini...

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity.

Science.gov (United States)

Freitas, Elisângela P; Rahal, Sheila C; Teixeira, Carlos R; Teixeira, Rodrigo H F; Mendes, Guilherme M; Gioso, Marco A

2008-06-01

The aims of this study were to develop a dental evaluate any oral cavity disease, develop gypsum models of the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula.: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented with various dental abnormalities as follows: dental plaque (71.4 0%), gingivitis (71.4 %), periodontitis (57.1 %), dental stain (42.9 %), dental abrasion (57.1 %), dental fracture (57.1 %), pulp exposure (42.9 %), malocclusion (57.1 %) and supernumerary teeth (14.2 %).

[Importance of cleaning and disinfection of critical surfaces in dental health services. Impact of an intervention program].

Science.gov (United States)

Véliz, Elena; Vergara, Teresa; Pearcy, Mercedes; Dabanch, Jeannette

Introduction Dental care has become a challenge for healthcare associated infection prevention programs, since the environment, within other factors, plays an important role in the transmission chain. Materials and Methods An intervention program was designed for the Dental Unit of Hospital Militar de Santiago, between years 2014 and 2015. The program contemplated 3 stages: diagnostic, intervention and evaluation stage. Objective To improve the safety of critical surfaces involved in dental healthcare. Results During the diagnostic stage, the cleaning and disinfection process was found to be deficient. The most contaminated critical surface was the instrument holder unit, then the clean area and lamp handle. The surfaces that significantly reduced their contamination, after the intervention, were the clean area and the instrument carrier unit. Conclusion Training in the processes of cleaning and disinfecting surfaces and dental equipment is one of the cost-effective strategies in preventing healthcare-associated infections (HCAI), with simple and easy-to-apply methods.

Research on dental implant and its industrialization stage

Science.gov (United States)

Dongjoon, Yang; Sukyoung, Kim

2017-02-01

Bone cell attachment to Ti implant surfaces is the most concerned issue in the clinical implant dentistry. Many attempts to achieve the fast and strong integration between bone and implant have been tried in many ways, such as selection of materials (for example, Ti, ZrO2), shape design of implant (for example, soft tissue level, bone level, taped or conical, etc), and surface modification of implants (for example, roughed. coated, hybrid), etc. Among them, a major consideration is the surface design of dental implants. The surface with proper structural characteristics promotes or induces the desirable responses of cells and tissues. To obtain such surface which has desirable cell and tissue response, a variety of surface modification techniques has been developed and employed for many years. In this review, the method and trend of surface modification will be introduced and explained in terms of the surface topography and chemistry of dental implants.

Protection From Dental Erosion: All Fluorides are Not Equal.

Science.gov (United States)

Faller, Robert V; Noble, Warden H

2018-03-01

All fluoride sources help strengthen teeth against bacterial acids that cause caries. However, excessive exposure to dietary acids, which can result in dental erosion, presents a more aggressive level of challenge compared to caries. Despite the fact that almost all toothpastes contain fluoride, both the incidence and prevalence of dental erosion appear to be on the rise. This article: (1) describes key differences between caries and dental erosion and the ability of different fluoride sources to help prevent erosion; (2) discusses the importance of the evaluation of patients for dental erosion at the earliest stages using the Basic Erosive Wear Examination scoring system to help assess and educate patients; and (3) provides evidence-based information for making specific recommendations to patients with dental erosion. The objective of this article is to assess the comparative ability of fluoride agents to protect against dental erosion. Though all fluorides are able to help strengthen teeth against cariogenic acids, not all available sources of fluoride provide the same level of erosion protection. Daily use of a stabilized stannous fluoride dentifrice has been shown to provide the most effective means of protecting teeth against the increasing risk of dental erosion and erosive tooth wear.

Dental and Skeletal Maturity- A Biological Indicator of Chronologic Age

Science.gov (United States)

Saha, Sonali; Yadav, Gunjan; Tripathi, Abhay Mani; Grover, Kavita

2014-01-01

Introduction: Precise evaluation of the developmental stage of a child is not only an integral part of both diagnosis and treatment of paediatric patients; it is also essential in Forensic Medicine and Dentistry. Physiologic age can be estimated by somatic, sexual, skeletal and dental maturity. Aim: Investigate the relationship between the dental age (DA) and skeletal age (SA) of children and comparing it with the chronological age (CA). Materials and Methods: The dental age estimation methods of Schour and Massler (S&M), and Demirjian and Goldstien (D&G) and skeletal assessment methods of Greulich and Pyle (G&P), and Tanner et al., (TW2) were used to analyze the orthopantomograms and hand-wrist radiographs respectively of 150 healthy subjects within the age range of 5-15 y and compared with the Chronological Age. Statistical Analysis: Data collected was statistically analysed using the SPSS version 15.0 Statistical Analysis Software. For all tests p-value of <0.05 were considered statistically significance. Results: Dental age estimation techniques were found comparable and equally reliable as the skeletal age estimation methods. Strong correlations between dental and skeletal maturation were demonstrated. PMID:25386525

Simultaneous determination of components released from dental composite resins in human saliva by liquid chromatography/multiple-stage ion trap mass spectrometry.

Science.gov (United States)

Hsu, Wei-Yi; Wang, Ven-Shing; Lai, Chien-Chen; Tsai, Fuu-Jen

2012-02-01

Dental composite resins are widely used for fixing teeth; however, the monomers used in dental composite resins have been found to be cytotoxic and genotoxic, namely triethylene glycol dimethacrylate (TEGDMA), urethane dimethacrylate (UDMA), and bisphenol A glycol dimethacrylate (Bis-GMA). In this study, we incubated dental composite resins with human saliva for demonstrating the released monomers and biodegradation products. A simple saliva sample dilution method without purification or derivatization was used for quantification. We found that liquid chromatography coupled with multiple-stage ion trap mass spectrometry (LC-MS(n) ) operated in selected reaction monitoring (SRM) mode was able to separate the three monomers within 10 min. The calibration curves were linear (R² >0.996) over a wide range for each monomer in saliva: TEGDMA, 5-500 ppb; UDMA, 5-100 ppb, and Bis-GMA, 5-700 ppb. Furthermore, several biodegradation products were discovered with data-dependent MS/MS scan techniques. Although TEGMA degradation products have previously been reported, we identified two previously unknown UDMA degradation products. The LC-MS/MS method developed in this study was able to successfully quantify monomers and their principal biodegradation products from dental composite resins in human saliva. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Reference dose levels for dental periapical radiography in Chonnam Province

International Nuclear Information System (INIS)

Han, Mi Ra; Kang, Byung Cheol; Yoon, Suk Ja; Lee, Jae Seo; Kim, Young Hee

2009-01-01

To establish reference doses of periapical radiography in Chonnam Province, Korea. The target-skin distances were measured for dental patient's 1235 exposures including 345 mandibular molar areas. Each periapical radiation exposure was simulated with exactly the same patients exposure parameters and the simulated radiation doses were measured utilizing Mult-O-Meter (Unfors Instruments, Billadal, Sweden). The measurements were done in 44 dental clinics with 49 dental x-ray sets in Chonnam Province for one or two weeks at each dental clinic during year 2006. The third quartile patient surface doses were 2.8 mGy for overall periapical exposures and 3.2 mGy for periapical mandibular molar exposures. The third quartile patient surface doses in Chonnam Province can be used as a guide to accepted clinical practice to reduce patient radiation exposure for the surveyed reference doses were below the recommended dental periapical radiography dose of 7 mGy by IAEA.

Reference dose levels for dental periapical radiography in Chonnam Province

Energy Technology Data Exchange (ETDEWEB)

Han, Mi Ra; Kang, Byung Cheol; Yoon, Suk Ja [Department of Oral and Maxillofacial Radiology, College of Dentistry, Dental Science Research Institute, Chonnam National University, Gwangju (Korea, Republic of); Lee, Jae Seo [Department of Oral and Maxillofacial Radiology, Chonnan National University Hospital, Gwangju (Korea, Republic of); Kim, Young Hee [Department of Oral and Maxillofacial Radiology, Hallym University Sacred Heart Hospital, Chuncheon (Korea, Republic of)

2009-12-15

To establish reference doses of periapical radiography in Chonnam Province, Korea. The target-skin distances were measured for dental patient's 1235 exposures including 345 mandibular molar areas. Each periapical radiation exposure was simulated with exactly the same patients exposure parameters and the simulated radiation doses were measured utilizing Mult-O-Meter (Unfors Instruments, Billadal, Sweden). The measurements were done in 44 dental clinics with 49 dental x-ray sets in Chonnam Province for one or two weeks at each dental clinic during year 2006. The third quartile patient surface doses were 2.8 mGy for overall periapical exposures and 3.2 mGy for periapical mandibular molar exposures. The third quartile patient surface doses in Chonnam Province can be used as a guide to accepted clinical practice to reduce patient radiation exposure for the surveyed reference doses were below the recommended dental periapical radiography dose of 7 mGy by IAEA.

Unravelling the Functional Biomechanics of Dental Features and Tooth Wear

Science.gov (United States)

Benazzi, Stefano; Nguyen, Huynh Nhu; Kullmer, Ottmar; Hublin, Jean-Jacques

2013-01-01

Most of the morphological features recognized in hominin teeth, particularly the topography of the occlusal surface, are generally interpreted as an evolutionary functional adaptation for mechanical food processing. In this respect, we can also expect that the general architecture of a tooth reflects a response to withstand the high stresses produced during masticatory loadings. Here we use an engineering approach, finite element analysis (FEA), with an advanced loading concept derived from individual occlusal wear information to evaluate whether some dental traits usually found in hominin and extant great ape molars, such as the trigonid crest, the entoconid-hypoconulid crest and the protostylid have important biomechanical implications. For this purpose, FEA was applied to 3D digital models of three Gorilla gorilla lower second molars (M2) differing in wear stages. Our results show that in unworn and slightly worn M2s tensile stresses concentrate in the grooves of the occlusal surface. In such condition, the trigonid and the entoconid-hypoconulid crests act to reinforce the crown locally against stresses produced along the mesiodistal groove. Similarly, the protostylid is shaped like a buttress to suffer the high tensile stresses concentrated in the deep buccal groove. These dental traits are less functional in the worn M2, because tensile stresses decrease physiologically in the crown with progressing wear due to the enlargement of antagonistic contact areas and changes in loading direction from oblique to nearly parallel direction to the dental axis. This suggests that the wear process might have a crucial influence in the evolution and structural adaptation of molars enabling to endure bite stresses and reduce tooth failure throughout the lifetime of an individual. PMID:23894570

Role of Anatomic and Salivary Factors in Dental Calculus Formation in Primary and Mixed Dentition Stages.

Science.gov (United States)

Afshar, Hossein; Ghandehari, Mehdi; Khorsand, Afshin; Ansari, Ghassem; Nahvi, Azam; Baniameri, Zahra

2016-01-01

Clinical experience shows that formation of calculus is a very rare phenomenon in primary teeth, but it increases as the permanent teeth erupt. The purpose of this study was to assess the relationship between dental calculus, dental anatomy, and salivary factors in primary and mixed dentition stages. A cross-sectional study was carried out to determine the buccolingual dimensions of the most concave and the most convex surfaces of the lingual aspect of mandibular central incisor crowns in a sample group of 120 three- to five-old children and 120 eight- to 10-year old children. Saliva samples were collected from 20 in each group. Data were analyzed using t tests. Significant differences were found between the ratio of the buccolingual dimensions of the most convex to the most concave areas of the lingual surfaces in primary and permanent incisors (P=0.028). Saliva analysis revealed significant differences in total protein (P=0.002), sodium (P=0.037), bicarbonate (P=0.003), and ammonia (P=0.025) between the two age groups. Anatomic and salivary factors may be important reasons for the differences in calculus formation.

Northern Chinese dental ages estimated from southern Chinese reference datasets closely correlate with chronological age

Directory of Open Access Journals (Sweden)

Hai Ming Wong

2016-12-01

Full Text Available While northern and southern Chinese are genetically correlated, there exists notable environmental differences in their living conditions. This study aimed to evaluate validity of the southern Chinese reference dataset for dental age estimation applied to northern Chinese. Dental panoramic tomographs of 437 northern Chinese aged 3 to 21 years were analysed. All the left maxillary and mandibular permanent teeth plus the 2 third molars on the right side were scored based on Demirjian’s classification of tooth development stages. Mean and standard error of dental age were obtained for each tooth development stage, followed by random effect meta-analysis for mean dental age estimation. Validity of the method was examined through measures of agreement (95% limits of agreement, standard error of measurement, and Lin’s concordance correlation coefficient and measure of reliability (Intraclass correlation coefficient. On average, the estimated dental age overestimated chronological age by only around 1 month in both females and males. The Intraclass correlation coefficient values were 0.99 for both sexes, suggesting excellent reliability of the method. Reference dataset for dental age estimation developed on the basis of southern Chinese was applicable for use among the northern Chinese.

[Fabrication and accuracy research on 3D printing dental model based on cone beam computed tomography digital modeling].

Science.gov (United States)

Zhang, Hui-Rong; Yin, Le-Feng; Liu, Yan-Li; Yan, Li-Yi; Wang, Ning; Liu, Gang; An, Xiao-Li; Liu, Bin

2018-04-01

The aim of this study is to build a digital dental model with cone beam computed tomography (CBCT), to fabricate a virtual model via 3D printing, and to determine the accuracy of 3D printing dental model by comparing the result with a traditional dental cast. CBCT of orthodontic patients was obtained to build a digital dental model by using Mimics 10.01 and Geomagic studio software. The 3D virtual models were fabricated via fused deposition modeling technique (FDM). The 3D virtual models were compared with the traditional cast models by using a Vernier caliper. The measurements used for comparison included the width of each tooth, the length and width of the maxillary and mandibular arches, and the length of the posterior dental crest. 3D printing models had higher accuracy compared with the traditional cast models. The results of the paired t-test of all data showed that no statistically significant difference was observed between the two groups (P>0.05). Dental digital models built with CBCT realize the digital storage of patients' dental condition. The virtual dental model fabricated via 3D printing avoids traditional impression and simplifies the clinical examination process. The 3D printing dental models produced via FDM show a high degree of accuracy. Thus, these models are appropriate for clinical practice.

Fast XRF analysis of mineral elements in dental composites

International Nuclear Information System (INIS)

Preoteasa, E. A.; Constantinescu, B.; Preoteasa, E.

2001-01-01

Dental composites, made of particles of glass, ceramics or quartz embedded in an organic polymer matrix, extensively replaced silver amalgam in tooth fillings and enabled new applications for restorative dentistry. Long-term alteration of dental fillings together with market pressure motivates the development of composites at a high rate, largely by progress of materials forming their mineral phase. Therefore, dental composites constantly bring at the interface with enamel and dentine new elements foreign to the organism, whose biological action has not been studied. Atomic and nuclear methods for surface multielemental analysis have been used in dental research but not for composites. X-ray fluorescence (XRF) is suited for the fast microanalytical screening of the elements and of their changes at the biomaterial's surface. The potential of radioisotope-excited XRF for the analysis of dental composites has been examined. Flat disk-shaped samples of composites have been prepared and polymerized chemically or by irradiation with intense 420-500 nm light. The measurements were performed with a spectrometric chain containing a 30 mCi source of 241 Am, a Si(Li) detector, and a multichannel analyzer. The spectra were built up for 2000-6000 sec. The characteristic X lines were integrated and normalized to source lines. The following Z ≥ 20 elements were detected in the studied composites: Ba only in Charisma (Kulzer) and Pekafill (Bayer); Zr, Ba, Yb in Tetric Ceram, and Ca, Ba, Yb together with traces of possibly Ti and Fe in Ariston (both from Vivadent); Zr, Hf in Valux Plus (3M Dental); and Sr, Ba together with some trace element, seemingly Cu, in F2000 Compomer (3M Dental) and with other trace elements like Ca, Fe in Surefil (Dentsply). Among older materials, Concise (3M Dental) contained only light (Z 3 that releases F for protection of enamel and dentine. Yb, Zr, Ba, Hf improve the radiological opacity of the materials. Some elements may accompany others as

Oral cavity evaluation and dental chart registration of coati (Nasua nasua) in captivity

OpenAIRE

Freitas, Elisângela P; Rahal, Sheila Canevese; Teixeira, Carlos Roberto; Teixeira, Rodrigo Hidalgo Friciello; Mendes, Guilherme Martines Teixeira; Gioso, Marco Antonio

2008-01-01

The aims of this study were to develop a dental chart, evaluate any oral cavity disease, develop gypsum models of the dental arches, and to register the occlusions found in coatis (Nasua nasua) in captivity. Formulation of the dental chart was assisted by intraoral radiographs from the head of an adult coati cadaver of the same species with the following dental formula: I 3/3, C 1/1, P 4/3, M 2/2. Seven live coatis of the Nasua nasua species were evaluated. Five of the seven coatis presented ...

Demirjian's stages and Cameriere's third molar maturity index to estimate legal adult age in Peruvian population.

Science.gov (United States)

Quispe Lizarbe, Roselhy Juliana; Solís Adrianzén, Christian; Quezada-Márquez, Milushka Miroslava; Galić, Ivan; Cameriere, Roberto

2017-03-01

To compare the accuracy of Demirjian's stages (DS) and Cameriere's third molar maturity index cut-off value (I 3M age of majority on panoramic radiographs (OPTs) from the dental clinic of the Scientific University of the South (UCSUR), Lima, Peru. An observational cross-sectional study was conducted on the sample of 208 digital panoramic radiographs of patients aged 14-22years examined during 2015 in UCSUR. The left lower third molars were analyzed using Adobe Photoshop® CS6. An effectiveness of specific DS and I 3M third molar maturity index (I 3M <0.08) showed to be more accurate in discriminating adults and minors in Peruvian sample when a test with high sensitivity and specificity is required. Copyright © 2017 Elsevier B.V. All rights reserved.

A comparison between cervical vertebrae and modified MP3 stages for the assessment of skeletal maturity.

Science.gov (United States)

Prasad, Mandava; Ganji, Venkata Suresh Kumar; George, Suja Ani; Talapaneni, Ashok Kumar; Shetty, Sharath Kumar

2013-01-01

Evaluation of skeletal maturity in human individuals is an important aspect in orthodontics and dentofacial orthopedics because, growth guidance and fundamental structural changes are essential for treatment of skeletal discrepancies in all the three planes. Among various growth assessment methods, cervical vertebra maturation stages and hand wrist have been correlated with the individual growth changes during puberty. The purpose of this study is to determine correlation of the CVM index with the modified median phalanx index (MP3) as described by Rajagopal and Kansal. 200 subjects (100 males and 100 females) of Nellore, Indian origin boys aged between 10 to 19 years and girls of 8 to 16 years were selected for the study. The subjects are selected randomly from patients visiting the Departments of Orthodontics and Dentofacial Orthopedics, Pediatric dentistry and Oral medicine and Radiology at Narayana Dental College and Hospital. Nellore. Radiographs of left hand MP3 and lateral cephalogram were taken. Cohen's kappa statistic was used to assess the agreement between the two measurements based on categorical variables. There was a good concordance between 6 stages of CVMI (Hassel and Farman) and the 6 stages of MP3 (Rajagopal and Kansal). Physiological maturity was earlier in females than in males when compared to the individuals of opposite sex of same chronological age. Chronological age was not a valid predictor of assessing the skeletal maturity because of significant variations in the distribution of CVMI and MP3 stages with respect to individual chronological age distribution.

Dose reference levels in Spanish intraoral dental radiology: stabilisation of the incorporation of digital systems in dental clinical practices

International Nuclear Information System (INIS)

Alcaraz, M.; Velasco, F.; Olivares, A.; Velasco, E.; Canteras, M.

2016-01-01

A total of 34 044 official quality assurance reports in dental radiodiagnostic surgery from 16 regions of Spain, compiled from 2002 to 2014, were studied in order to determine the progress of diagnostic reference levels (DRLs) for obtaining diagnostic images under normal conditions for clinical practice in Spanish dental clinics. A DRL of 2.8 mGy was set in 2014, which represents a 41.7 % decrease compared with that of 2002 (4.8 mGy). Over the same time period, the mean dose fell by 55.2 %. However, over the last 3 y, the stabilisation of the mean dose administered to patients has been observed with only a 6.7 % reduction in DRLs, which corresponds to the stabilisation of dental radiodiagnostic surgery on replacing the use of radiographic film with digital imaging systems. (authors)

Infiltración de resina como tratamiento mínimamente invasivo de lesiones de caries dental incipiente

Directory of Open Access Journals (Sweden)

Alain Manuel Chaple Gil

Full Text Available La mínima intervención en cariología ha sido definida como la filosofía de cuidados estomatológicos que se encarga del tratamiento de la primera aparición, la detección temprana y el tratamiento de la caries dental. Una de las técnicas para el tratamiento temprano y detención de lesiones incipientes es la infiltración de resina. El objetivo es mostrar la utilidad de las resinas fluidas para la infiltración de un primer y segundo molar inferior permanentes con una lesión incipiente de caries dental. Se trata de un paciente masculino de 17 años de edad sin antecedentes patológicos, que acude a consulta estomatológica. En hemiarcada inferior izquierda se observaron manchas en forma de punto de color marrón oscuro cerca de la fosita central y en la estría vestibular del 36 y 37 respectivamente, que no presentaban más de 1 mm de profundidad. Se diagnosticaron lesiones de caries dental incipiente y se decidió realizar una infiltración con resina compuesta de baja viscosidad o fluida en consulta única. El uso de resinas compuestas fluidas es beneficioso en la infiltración de lesiones cariosas incipientes de esmalte, pues evita su propagación y sella las brechas de esmalte afectado. Es una técnica de mínima intervención en cariología, que propicia una solución inmediata para estos procesos y mayor sencillez para la solución de la enfermedad caries dental al equilibrar las expectativas estéticas y de mantenimiento de las estructuras dentarias sanas.

Estimation of Correlation between Chronological Age, Skeletal Age and Dental Age in Children- A Cross-sectional Study.

Science.gov (United States)

Macha, Madhulika; Lamba, Bharti; Avula, Jogendra Sai Sankar; Muthineni, Sridhar; Margana, Pratap Gowd Jai Shankar; Chitoori, Prasad

2017-09-01

In the modern era, identification and determination of age is imperative for diversity of reasons that include disputed birth records, premature delivery, legal issues and for validation of birth certificate for school admissions, adoption, marriage, job and immigration. Several growth assessment parameters like bone age, dental age and the combination of both have been applied for different population with variable outcomes. It has been well documented that the chronological age does not necessarily correlate with the maturational status of a child. Hence, efforts were made to determine a child's developmental age by using dental age (calcification of teeth) and skeletal age (skeletal maturation). The present study was aimed to correlate the chronological age, dental age and skeletal age in children from Southeastern region of Andhra Pradesh, India. Out of the total 900 screened children, only 100 subjects between age groups of 6-14 years with a mean age of 11.3±2.63 for males and 10.77±2.24 for females were selected for the study. Dental age was calculated by Demirjian method and skeletal age by modified Middle Phalanx of left hand third finger (MP3) method. Pearson's and Spearman's correlation tests were done to estimate the correlation between chronological, dental and skeletal ages among study population. There was a significant positive correlation between chronological age, dental age and all stages of MP3 among males. Similar results were observed in females, except for a non-significant moderate correlation between chronological age and dental age in the H stage of the MP3 region. The results of the present study revealed correlation with statistical significance (p<0.05) between chronological, dental and skeletal ages among all the subjects (48 males and 52 females) and females attained maturity earlier than males in the present study population.

Development and study of a 3.2-mm-diameter, 1.2-m-long two-stage plasma-arc-driven railgun for hypervelocity hydrogen pellet injection

International Nuclear Information System (INIS)

Zhang, D.; Kim, K.

1988-12-01

A detailed description of a prototype, fuseless, plasma-arc-driven, two-stage railgun system with a 1.2-m-long railgun barrel and a 3.2-mm-diameter circular bore is presented, along with the preliminary results indicating its capabilities and limitations. A hydrogen pellet generator, which has a straight-tube configuration and which is also operated as a gas gun, is employed as the first stage of the two-stage acceleration system. The design details of this preacceleration system and the results illustrating its performance are first presented. The second-stage accelerator which acts as a booster accelerator, is a fuseless plasma-arc-driven railgun, and constitutes the core of the entire two-stage acceleration scheme. Details of its design, ancillary systems, operation, and performance are described next in this report. The experimental data included herein represent only the preliminary data, and the system modifications that led to the improvements are described in the accompanying two other progress reports that precede this. 19 refs

Marginal Bone Remodeling around healing Abutment vs Final Abutment Placement at Second Stage Implant Surgery: A 12-month Randomized Clinical Trial.

Science.gov (United States)

Nader, Nabih; Aboulhosn, Maissa; Berberi, Antoine; Manal, Cordahi; Younes, Ronald

2016-01-01

The periimplant bone level has been used as one of the criteria to assess the success of dental implants. It has been documented that the bone supporting two-piece implants undergoes resorption first following the second-stage surgery and later on further to abutment connection and delivery of the final prosthesis. The aim of this multicentric randomized clinical trial was to evaluate the crestal bone resorption around internal connection dental implants using a new surgical protocol that aims to respect the biological distance, relying on the benefit of a friction fit connection abutment (test group) compared with implants receiving conventional healing abutments at second-stage surgery (control group). A total of partially edentulous patients were consecutively treated at two private clinics, with two adjacent two-stage implants. Three months after the first surgery, one of the implants was randomly allocated to the control group and was uncovered using a healing abutment, while the other implant received a standard final abutment and was seated and tightened to 30 Ncm. At each step of the prosthetic try-in, the abutment in the test group was removed and then retightened to 30 Ncm. Horizontal bone changes were assessed using periapical radiographs immediately after implant placement and at 3 (second-stage surgery), 6, 9 and 12 months follow-up examinations. At 12 months follow-up, no implant failure was reported in both groups. In the control group, the mean periimplant bone resorption was 0.249 ± 0.362 at M3, 0.773 ± 0.413 at M6, 0.904 ± 0.36 at M9 and 1.047 ± 0.395 at M12. The test group revealed a statistically significant lower marginal bone loss of 20.88% at M3 (0.197 ± 0.262), 22.25% at M6 (0.601 ± 0.386), 24.23% at M9 (0.685 ± 0.341) and 19.2% at M9 (0.846 ± 0.454). The results revealed that bone loss increased over time, with the greatest change in bone loss occurring between 3 and 6 months. Alveolar bone loss was significantly greater in the

Postoperative dental morbidity in children following dental treatment under general anesthesia.

Science.gov (United States)

Hu, Yu-Hsuan; Tsai, Aileen; Ou-Yang, Li-Wei; Chuang, Li-Chuan; Chang, Pei-Ching

2018-05-10

General anesthesia has been widely used in pediatric dentistry in recent years. However, there remain concerns about potential postoperative dental morbidity. The goal of this study was to identify the frequency of postoperative dental morbidity and factors associated with such morbidity in children. From March 2012 to February 2013, physically and mentally healthy children receiving dental treatment under general anesthesia at the Department of Pediatric Dentistry of the Chang Gung Memorial Hospital in Taiwan were recruited. This was a prospective and observational study with different time evaluations based on structured questionnaires and interviews. Information on the patient demographics, anesthesia and dental treatment performed, and postoperative dental morbidity was collected and analyzed. Correlations between the study variables and postoperative morbidity were analyzed based on the Pearson's chi-square test. Correlations between the study variables and the scale of postoperative dental pain were analyzed using the Mann-Whitney U test. Fifty-six pediatric patients participated in this study, with an average age of 3.34 ± 1.66 years (ranging from 1 to 8 years). Eighty-two percent of study participants reported postoperative dental pain, and 23% experienced postoperative dental bleeding. Both dental pain and bleeding subsided 3 days after the surgery. Dental pain was significantly associated with the total number of teeth treated, while dental bleeding, with the presence of teeth extracted. Patients' gender, age, preoperative dental pain, ASA classification, anesthesia time, and duration of the operation were not associated with postoperative dental morbidity. Dental pain was a more common postoperative dental morbidity than bleeding. The periods when parents reported more pain in their children were the day of the operation (immediately after the procedure) followed by 1 day and 3 days after the treatment.

Patient radiation dose in some dental radiography clinics in Khartoum, Sudan

International Nuclear Information System (INIS)

Mohamed, Aziza Hamed Abdelgadir

2016-01-01

Patient dose audit is an important tool for quality control and it is important for monitoring patient exposure. The DAP meter has proved to be an easy and accurate tool for patient dosimetry and for establishment of diagnostic reference levels in dental radiology. The objective of this study was measure patient dose in dental radiography in some dental radiography clinics in Khartoum. The study was performed in five dental clinics comprising six panoramic and six intraoral dental radiography devices in Khartoum state. The incident surface air kerma (k i ) and dose area product were measured for intraoral and panoramic dental examinations, respectively for digital and film imaging modalities. Incident surface air kerma (k i ) was measured using calibrated dose rate meter where dose area product were determined from dose width product (DWP) measured using 3 cc pencil type CT ionization chamber. For intraoral examinations, the maximum, average and minimum, (1.95, 1.48, and 1.24) mGy, (5.84, 4.54, and 3.6) mGy for digital and imaging, respectively. This result was lower in digital in traol and higher in film imaging. The result for panoramic examination calculated dose area product (DAP) mean value for adult and pediatric was (103, 70.42) mGy cm 2 , respectively, where the dose for digital imaging was highest in two centers, compared to previous study. Increased patient dose in intraoral dental radiography could partially be explained by the use of circular collimators. or intraoral x-ray equipment the downward trend in patient dose can only be continue, a through the adoption of digital imaging methods. Our results are relatively higher in digital panoramic dental examinations. It is important to point out that non of the dental units under study were covered by regular quality assurance programme.(Author)

Dental formulations for the prevention of dental erosion

DEFF Research Database (Denmark)

2010-01-01

The invention relates to a therapeutic method for preventing and/or inhibiting dental erosion in a mammalian subject, and the provision of a dental care product for performing the method. The dental care product of the invention comprises a starch-degrading enzyme of E. C. 3.2.1.1, wherein said...... product comprises less than 1 wt.% ionic surfactant, and preferably is substantially free of endoprotease and/or lipase. The properties of the dental care product serve to prevent and/or inhibit dental erosion in a subject that typically results from repeated exposure of the patient's tooth surfaces...

PHOTOACOUSTIC NON-DESTRUCTIVE EVALUATION AND IMAGING OF CARIES IN DENTAL SAMPLES

International Nuclear Information System (INIS)

Li, T.; Dewhurst, R. J.

2010-01-01

Dental caries is a disease wherein bacterial processes damage hard tooth structure. Traditional dental radiography has its limitations for detecting early stage caries. In this study, a photoacoustic (PA) imaging system with the near-infrared light source has been applied to postmortem dental samples to obtain 2-D and 3-D images. Imaging results showed that the PA technique can be used to image human teeth caries. For non-destructive photoacoustic evaluation and imaging, the induced temperature and pressure rises within biotissues should not cause physical damage to the tissue. For example, temperature rises above 5 deg. C within live human teeth will cause pulpal necrosis. Therefore, several simulations based on the thermoelastic effect have been applied to predict temperature and pressure fields within samples. Predicted temperature levels are below corresponding safety limits, but care is required to avoid nonlinear absorption phenomena. Furthermore, PA imaging results from the phantom provide evidence for high sensitivity, which shows the imaging potential of the PA technique for detecting early stage disease.

International Association of Dental Traumatology guidelines for the management of traumatic dental injuries. 3

DEFF Research Database (Denmark)

Diangelis, A J; Andreasen, J O; Ebeleseder, K A

2014-01-01

Traumatic injuries to the primary dentition present special problems and the management is often different as compared with the permanent dentition. The International Association of Dental Traumatology (IADT) has developed a consensus statement after a review of the dental literature and group...

Cytotoxicity and biocompatibility of Zirconia (Y-TZP posts with various dental cements

Directory of Open Access Journals (Sweden)

Hyeongsoon Shin

2016-08-01

Full Text Available Objectives Endodontically treated teeth with insufficient tooth structure are often restored with esthetic restorations. This study evaluated the cytotoxicity and biological effects of yttria partially stabilized zirconia (Y-TZP blocks in combination with several dental cements. Materials and Methods Pairs of zirconia cylinders with medium alone or cemented with three types of dental cement including RelyX U200 (3M ESPE, FujiCEM 2 (GC, and Panavia F 2.0 (Kuraray were incubated in medium for 14 days. The cytotoxicity of each supernatant was determined using 3-(4,5-dimethylthiazole-2-yl-2,5-diphenyltetrazolium bromide (MTT assays on L929 fibroblasts and MC3T3-E1 osteoblasts. The levels of interleukin-6 (IL-6 mRNA were evaluated by reverse transcription polymerase chain reaction (RT-PCR, and IL-6 protein was evaluated by enzyme-linked immunosorbent assays (ELISA. The data were analyzed using one-way ANOVA and Tukey post-hoc tests. A p < 0.05 was considered statistically significant. Results The MTT assays showed that MC3T3-E1 osteoblasts were more susceptible to dental cements than L929 fibroblasts. The resin based dental cements increased IL-6 expression in L929 cells, but reduced IL-6 expression in MC3T3-E1 cells. Conclusions Zirconia alone or blocks cemented with dental cement showed acceptable biocompatibilities. The results showed resin-modified glass-ionomer based cement less produced inflammatory cytokines than other self-adhesive resin-based cements. Furthermore, osteoblasts were more susceptible than fibroblasts to the biological effects of dental cement.

Comparative Genome Analysis of Lactobacillus rhamnosus Clinical Isolates from Initial Stages of Dental Pulp Infection: Identification of a New Exopolysaccharide Cluster

Science.gov (United States)

Nadkarni, Mangala A.; Chen, Zhiliang; Wilkins, Marc R.; Hunter, Neil

2014-01-01

The human oral microbiome has a major role in oral diseases including dental caries. Our studies on progression of caries infection through dentin and more recently, the invasion of vital dental pulp, detected Lactobacillus rhamnosus in the initial stages of infection of vital pulp tissue. In this study employing current high-throughput next generation sequencing technology we sought to obtain insight into genomic traits of tissue invasive L. rhamnosus, to recognise biomarkers that could provide an understanding of pathogenic potential of lactobacilli, generally regarded as safe. Roche GS FLX+ technology was used to generate whole genome sequences of two clinical isolates of L. rhamnosus infecting vital pulp. Detailed genome-wide comparison of the genetic profiles of tissue invasive L. rhamnosus with probiotic L. rhamnosus was performed to test the hypothesis that specific strains of L. rhamnosus possessing a unique gene complement are selected for the capacity to invade vital pulp tissue. Analysis identified 264 and 258 genes respectively, from dental pulp-invasive L. rhamnosus strains LRHMDP2 and LRHMDP3 isolated from two different subjects that were not present in the reference probiotic L. rhamnosus strain ATCC 53103 (GG). Distinct genome signatures identified included the presence of a modified exopolysaccharide cluster, a characteristic confirmed in a further six clinical isolates. Additional features of LRHMDP2 and LRHMDP3 were altered transcriptional regulators from RpoN, NtrC, MutR, ArsR and zinc-binding Cro/CI families, as well as changes in the two-component sensor kinase response regulator and ABC transporters for ferric iron. Both clinical isolates of L. rhamnosus contained a single SpaFED cluster, as in L. rhamnosus Lc705, instead of the two Spa clusters (SpaCBA and SpaFED) identified in L. rhamnosus ATCC 53103 (GG). Genomic distance analysis and SNP divergence confirmed a close relationship of the clinical isolates but segregation from the reference

National reference doses for dental cephalometric radiography.

Science.gov (United States)

Holroyd, J R

2011-12-01

Diagnostic reference levels (DRLs) are an important tool in the optimisation of clinical radiography. Although national DRLs are provided for many diagnostic procedures including dental intra-oral radiography, there are currently no national DRLs set for cephalometric radiography. In the absence of formal national DRLs, the Health Protection Agency (HPA) has previously published National Reference Doses (NRDs) covering a wide range of diagnostic X-ray examinations. The aim of this study was to determine provisional NRDs for cephalometric radiography. Measurements made by the Dental X-ray Protection Service (DXPS) of the HPA, as part of the cephalometric X-ray equipment testing service provided to dentists and dental trade companies throughout the UK, were used to derive provisional NRDs. Dose-area product measurements were made on 42 X-ray sets. Third quartile dose-area product values for adult and child lateral cephalometric radiography were found to be 41 mGy cm² and 25 mGy cm², respectively, with individual measurements ranging from 3 mGy cm² to 108 mGy cm². This report proposes provisional NRDs of 40 mGy cm² and 25 mGy cm² for adult and child lateral cephalometric radiographs, respectively; these doses could be considered by employers when establishing their local DRLs.

Social Media in the Dental School Environment, Part B: Curricular Considerations.

Science.gov (United States)

Spallek, Heiko; Turner, Sharon P; Donate-Bartfield, Evelyn; Chambers, David; McAndrew, Maureen; Zarkowski, Pamela; Karimbux, Nadeem

2015-10-01

The goal of this article is to describe the broad curricular constructs surrounding teaching and learning about social media in dental education. This analysis takes into account timing, development, and assessment of the knowledge, skills, attitudes, and behaviors needed to effectively use social media tools as a contemporary dentist. Three developmental stages in a student's path to becoming a competent professional are described: from undergraduate to dental student, from the classroom and preclinical simulation laboratory to the clinical setting, and from dental student to licensed practitioner. Considerations for developing the dental curriculum and suggestions for effective instruction at each stage are offered. In all three stages in the future dentist's evolution, faculty members need to educate students about appropriate professional uses of social media. Faculty members should provide instruction on the beneficial aspects of this communication medium and help students recognize the potential pitfalls associated with its use. The authors provide guidelines for customizing instruction to complement each stage of development, recognizing that careful timing is not only important for optimal learning but can prevent inappropriate use of social media as students are introduced to novel situations.

Craniofacial changes in Class III malocclusion as related to skeletal and dental maturation.

Science.gov (United States)

Baccetti, Tiziano; Reyes, Brian C; McNamara, James A

2007-08-01

In this large cross-sectional study, we aimed to analyze growth trends in white subjects with Class III malocclusion using both skeletal and dental maturation staging. The sample consisted of 1091 pretreatment lateral cephalometric records of Class III patients (560 female, 531 male). Cephalometric dentoskeletal measurements were compared at subsequent stages in cervical vertebral maturation and Hellman's categorization of dental development by means of ANOVA with Bonferroni post-hoc tests in both sexes separately. The findings indicated that, in Class III malocclusion, the pubertal peak in mandibular growth occurs between stages 3 and 4 of cervical vertebral maturation, with average increases in total mandibular length of about 8 and 5.5 mm in Class III boys and girls, respectively. Significant changes in total mandibular length occur until young adulthood (18 years on average), with increases between late maturation stages (4 through 6) that were twice as large as in subjects with normal occlusion for the Class III females, and 3 times as large as in subjects with normal occlusion for the Class III males. Growth trends toward accentuated Class III profile and increased vertical dimension of the face also become apparent at late developmental stages (corresponding with complete eruption of the second and third molars).

Dental Fear and Delayed Dental Care in Appalachia-West Virginia.

Science.gov (United States)

Wiener, R Constance

2015-08-01

The people of Appalachia-West Virginia are culturally unique and are known to have oral health disparities. The purpose of this study was to evaluate dental fear in relation to delayed dental care as a factor influencing oral health behaviors within this culture. A cross sectional study design was used. Participants were urgent care patients in a university dental clinic. The sample included 140 adults over age 18 years. The Dental Fear Survey was used to determine dental fear level. Self-report of delayed dental care was provided by the participants. The Dental Fear Survey was dichotomized at score 33, with higher scores indicating dental fear. The prevalence of dental fear was 47.1% (n=66). There was a significant association of dental fear and dental delay. The unadjusted odds ratio was 2.87 (95% CI: 1.17, 7.04; p=0.021). The adjusted odds ratio was 3.83 (95%CI: 1.14, 12.82; p=0.030), controlling for tobacco use, perceived oral health status, pain, and last dental visit. A difference in dental delay between men and women was not present in this sample. The only significant variable in delayed dental care was dental fear. In Appalachia-West Virginia, there remains a high level of dental fear, despite advances in dental care, techniques, and procedures. Copyright © 2015 The American Dental Hygienists’ Association.

Human dental age estimation using third molar developmental stages: does a Bayesian approach outperform regression models to discriminate between juveniles and adults?

OpenAIRE

Thevissen, P. W.; FIEUWS, Steffen; Willems, G.

2010-01-01

Dental age estimation methods based on the radiologically detected third molar developmental stages are implemented in forensic age assessments to discriminate between juveniles and adults considering the judgment of young unaccompanied asylum seekers. Accurate and unbiased age estimates combined with appropriate quantified uncertainties are the required properties for accurate forensic reporting. In this study, a subset of 910 individuals uniformly distributed in age between 16 and 22 years ...

Wnt5a attenuates Wnt3a-induced alkaline phosphatase expression in dental follicle cells

Energy Technology Data Exchange (ETDEWEB)

Sakisaka, Yukihiko [Department of Periodontology and Endodontology, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan); Tsuchiya, Masahiro [Department of Oral Diagnosis, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan); Tohoku Fukushi University, Sendai 989-3201 (Japan); Nakamura, Takashi [Department of Pediatric Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan); Liason Center for Innovative Dentistry, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan); Tamura, Masato [Department of Biochemistry and Molecular Biology, Hokkaido University Graduate School of Dentistry, Sapporo 060-8586 (Japan); Shimauchi, Hidetoshi [Department of Periodontology and Endodontology, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan); Nemoto, Eiji, E-mail: e-nemoto@dent.tohoku.ac.jp [Department of Periodontology and Endodontology, Tohoku University Graduate School of Dentistry, Sendai 980-8575 (Japan)

2015-08-01

Wnt signaling regulates multiple cellular events such as cell proliferation, differentiation, and apoptosis through β-catenin-dependent canonical and β-catenin-independent noncanonical pathways. Canonical Wnt/β-catenin signaling can promote the differentiation of dental follicle cells, putative progenitor cells for cementoblasts, osteoblasts, and periodontal ligament cells, toward a cementoblast/osteoblast phenotype during root formation, but little is known about the biological significance of noncanonical Wnt signaling in this process. We identified the expression of Wnt5a, a representative noncanonical Wnt ligand, in tooth root lining cells (i.e. precementoblasts/cementoblasts) and dental follicle cells during mouse tooth root development, as assessed by immunohistochemistry. Silencing expression of the Wnt5a gene in a dental follicle cell line resulted in enhancement of the Wnt3a (a representative canonical Wnt ligand)-mediated increase in alkaline phosphatase (ALP) expression. Conversely, treatment with recombinant Wnt5a inhibited the increase in ALP expression, suggesting that Wnt5a signaling functions as a negative regulator of canonical Wnt-mediated ALP expression of dental follicle cells. Wnt5a did not affect the nuclear translocation of β-catenin as well as β-catenin-mediated transcriptional activation of T-cell factor (Tcf) triggered by Wnt3a, suggesting that Wnt5a inhibits the downstream part of the β-catenin-Tcf pathway. These findings suggest the existence of a feedback mechanism between canonical and noncanonical Wnt signaling during the differentiation of dental follicle cells. - Highlights: • Dental follicle cells express Wnt5a during tooth root development. • Silencing of Wnt5a enhances Wnt3a-mediated ALP expression of dental follicle cells. • Conversely, treatment with rWnt5a inhibited the increase in ALP expression. • Wnt5a functions as a negative regulator of Wnt3a-mediated ALP expression.

Wnt5a attenuates Wnt3a-induced alkaline phosphatase expression in dental follicle cells

International Nuclear Information System (INIS)

Sakisaka, Yukihiko; Tsuchiya, Masahiro; Nakamura, Takashi; Tamura, Masato; Shimauchi, Hidetoshi; Nemoto, Eiji

2015-01-01

Wnt signaling regulates multiple cellular events such as cell proliferation, differentiation, and apoptosis through β-catenin-dependent canonical and β-catenin-independent noncanonical pathways. Canonical Wnt/β-catenin signaling can promote the differentiation of dental follicle cells, putative progenitor cells for cementoblasts, osteoblasts, and periodontal ligament cells, toward a cementoblast/osteoblast phenotype during root formation, but little is known about the biological significance of noncanonical Wnt signaling in this process. We identified the expression of Wnt5a, a representative noncanonical Wnt ligand, in tooth root lining cells (i.e. precementoblasts/cementoblasts) and dental follicle cells during mouse tooth root development, as assessed by immunohistochemistry. Silencing expression of the Wnt5a gene in a dental follicle cell line resulted in enhancement of the Wnt3a (a representative canonical Wnt ligand)-mediated increase in alkaline phosphatase (ALP) expression. Conversely, treatment with recombinant Wnt5a inhibited the increase in ALP expression, suggesting that Wnt5a signaling functions as a negative regulator of canonical Wnt-mediated ALP expression of dental follicle cells. Wnt5a did not affect the nuclear translocation of β-catenin as well as β-catenin-mediated transcriptional activation of T-cell factor (Tcf) triggered by Wnt3a, suggesting that Wnt5a inhibits the downstream part of the β-catenin-Tcf pathway. These findings suggest the existence of a feedback mechanism between canonical and noncanonical Wnt signaling during the differentiation of dental follicle cells. - Highlights: • Dental follicle cells express Wnt5a during tooth root development. • Silencing of Wnt5a enhances Wnt3a-mediated ALP expression of dental follicle cells. • Conversely, treatment with rWnt5a inhibited the increase in ALP expression. • Wnt5a functions as a negative regulator of Wnt3a-mediated ALP expression

Demirjian approach of dental age estimation: Abridged for operator ease.

Science.gov (United States)

Jain, Vanshika; Kapoor, Priyanka; Miglani, Ragini

2016-01-01

Present times have seen an alarming increase in incidence of crimes by juveniles and of mass destruction that Highlight the preponderance of individual age estimation. Of the numerous techniques employed for age assessment, dental age estimation (DAE) and its correlation with chronological age (CA) have been of great significance in the recent past. Demirjian system, considered as gold standard in DAE is a simple and convenient method for DAE, though,, although, referring to multiple tables make it cumbersome and less eco friendly due to excessive paper load. The present study was aimed to develop a comprehensive chart (DAEcc) inclusive of all Demirjian tables and developmental stages of teeth and also to as well as to test the operator ease of 50 undergraduate dental students in performing DAE using this chart. The study was performed in two stages, wherein the first stage was aimed at formulation of the comprehensive chart (DAE CC ) which included pictorial representation of calcification stages, the Federation Dentaire Internationale notation of the teeth, and the corresponding scores for each stage with a concluding column at the end to enter the total score. The second stage assessed the applicability of the ease of DAE by DAE CC , whereby fifty 2 nd year BDS students were asked to trace the calcification stages of the seven permanent left mandibular teeth on a panorex, identify the correct stage, assign the corresponding score, and to calculate the total score for subsequent dental age assessment. showed that average time taken by the students for tracing seven mandibular teeth was 5 min and for assessment of dental age was 7 min. The total time taken for DAE was approximately 12 min, thus making the procedure less time consuming. Hence, this study proposes the use of DAEcc for age estimation due to ease in comprehension and execution of Demirjian system.

Chronic fluoride toxicity: dental fluorosis.

Science.gov (United States)

Denbesten, Pamela; Li, Wu

2011-01-01

Dental fluorosis occurs as a result of excess fluoride ingestion during tooth formation. Enamel fluorosis and primary dentin fluorosis can only occur when teeth are forming, and therefore fluoride exposure (as it relates to dental fluorosis) occurs during childhood. In the permanent dentition, this would begin with the lower incisors, which complete mineralization at approximately 2-3 years of age, and end after mineralization of the third molars. The white opaque appearance of fluorosed enamel is caused by a hypomineralized enamel subsurface. With more severe dental fluorosis, pitting and a loss of the enamel surface occurs, leading to secondary staining (appearing as a brown color). Many of the changes caused by fluoride are related to cell/matrix interactions as the teeth are forming. At the early maturation stage, the relative quantity of amelogenin protein is increased in fluorosed enamel in a dose-related manner. This appears to result from a delay in the removal of amelogenins as the enamel matures. In vitro, when fluoride is incorporated into the mineral, more protein binds to the forming mineral, and protein removal by proteinases is delayed. This suggests that altered protein/mineral interactions are in part responsible for retention of amelogenins and the resultant hypomineralization that occurs in fluorosed enamel. Fluoride also appears to enhance mineral precipitation in forming teeth, resulting in hypermineralized bands of enamel, which are then followed by hypomineralized bands. Enhanced mineral precipitation with local increases in matrix acidity may affect maturation stage ameloblast modulation, potentially explaining the dose-related decrease in cycles of ameloblast modulation from ruffle-ended to smooth-ended cells that occur with fluoride exposure in rodents. Specific cellular effects of fluoride have been implicated, but more research is needed to determine which of these changes are relevant to the formation of fluorosed teeth. As further

Extracellular DNA Contributes to Dental Biofilm Stability

DEFF Research Database (Denmark)

Schlafer, Sebastian; Meyer, Rikke Louise; Dige, Irene

2017-01-01

dental biofilms. This study aimed to determine whether eDNA was part of the matrix in biofilms grown in situ in the absence of sucrose and whether treatment with DNase dispersed biofilms grown for 2.5, 5, 7.5, 16.5, or 24 h. Three hundred biofilms from 10 study participants were collected and treated...... the amount of biofilm in very early stages of growth (up to 7.5 h), but the treatment effect decreased with increasing biofilm age. This study proves the involvement of eDNA in dental biofilm formation and its importance for biofilm stability in the earliest stages. Further research is required to uncover...

Radiation dose in dental radiology

International Nuclear Information System (INIS)

Cohnen, M.; Kemper, J.; Moedder, U.; Moebes, O.; Pawelzik, J.

2002-01-01

The aim of this study was to compare radiation exposure in panoramic radiography (PR), dental CT, and digital volume tomography (DVT). An anthropomorphic Alderson-Rando phantom and two anatomical head phantoms with thermoluminescent dosimeters fixed at appropriate locations were exposed as in a dental examination. In PR and DVT, standard parameters were used while variables in CT included mA, pitch, and rotation time. Image noise was assessed in dental CT and DVT. Radiation doses to the skin and internal organs within the primary beam and resulting from scatter radiation were measured and expressed as maximum doses in mGy. For PR, DVT, and CT, these maximum doses were 0.65, 4.2, and 23 mGy. In dose-reduced CT protocols, radiation doses ranged from 10.9 to 6.1 mGy. Effective doses calculated on this basis showed values below 0.1 mSv for PR, DVT, and dose-reduced CT. Image noise was similar in DVT and low-dose CT. As radiation exposure and image noise of DVT is similar to low-dose CT, this imaging technique cannot be recommended as a general alternative to replace PR in dental radiology. (orig.)

Impact of Early Head Start in North Carolina on Dental Care Use Among Children Younger Than 3 Years.

Science.gov (United States)

Burgette, Jacqueline M; Preisser, John S; Weinberger, Morris; King, Rebecca S; Lee, Jessica Y; Rozier, R Gary

2017-04-01

To examine the effects of North Carolina Early Head Start (EHS), an early education program for low-income children younger than 3 years and their families, on dental care use among children. We performed a quasi-experimental study in which we interviewed 479 EHS and 699 non-EHS parent-child dyads at baseline (2010-2012) and at a 24-month follow-up (2012-2014). We estimated the effects of EHS participation on the probability of having a dental care visit after controlling for baseline dental care need and use and a propensity score covariate; we included random effects to account for EHS program clustering. The odds of having a dental care visit of any type (adjusted odds ratio [OR] = 2.5; 95% confidence interval [CI] = 1.74, 3.48) and having a preventive dental visit (adjusted OR = 2.6; 95% CI = 1.84, 3.63) were higher among EHS children than among non-EHS children. In addition, the adjusted mean number of dental care visits among EHS children was 1.3 times (95% CI = 1.17, 1.55) the mean number among non-EHS children. This study is the first, to our knowledge, to demonstrate that EHS participation increases dental care use among disadvantaged young children.

Leakage and scattered radiation from hand-held dental x-ray unit

International Nuclear Information System (INIS)

Kim, Eun Kyung

2007-01-01

To compare the leakage and scattered radiation from hand-held dental X-ray unit with radiation from fixed dental X-ray unit. For evaluation we used one hand-held dental X-ray unit and Oramatic 558 (Trophy Radiologie, France), a fixed dental X-ray unit. Doses were measured with Unfors Multi-O-Meter 512L at the right and left hand levels of X-ray tube head part for the scattered and leakage radiation when human skull DXTTR ΙΙΙ was exposed to both dental X-ray units. And for the leakage radiation only, doses were measured at the immediately right, left, superior and posterior side of the tube head part when air was exposed. Exposure parameters of hand-held dental X-ray unit were 70 kVp, 3 mA , 0.1 second, and of fixed X-ray unit 70 kVp, 8 mA, 0.45 second. The mean dose at the hand level when human skull DXTTR ΙΙΙ was exposed with portable X-ray unit 6.39 μGy, and the mean dose with fixed X-ray unit 3.03 μGy (p<0.001). The mean dose at the immediate side of the tube head part when air was exposed with portable X-ray unit was 2.97 μGy and with fixed X-ray unit the mean dose was 0.68 μGy (p<0.01). The leakage and scattered radiation from hand-held dental radiography was greater than from fixed dental radiography

Leakage and scattered radiation from hand-held dental x-ray unit

Energy Technology Data Exchange (ETDEWEB)

Kim, Eun Kyung [Dankook Univ. School of Dentistry, Seoul (Korea, Republic of)

2007-06-15

To compare the leakage and scattered radiation from hand-held dental X-ray unit with radiation from fixed dental X-ray unit. For evaluation we used one hand-held dental X-ray unit and Oramatic 558 (Trophy Radiologie, France), a fixed dental X-ray unit. Doses were measured with Unfors Multi-O-Meter 512L at the right and left hand levels of X-ray tube head part for the scattered and leakage radiation when human skull DXTTR {iota}{iota}{iota} was exposed to both dental X-ray units. And for the leakage radiation only, doses were measured at the immediately right, left, superior and posterior side of the tube head part when air was exposed. Exposure parameters of hand-held dental X-ray unit were 70 kVp, 3 mA , 0.1 second, and of fixed X-ray unit 70 kVp, 8 mA, 0.45 second. The mean dose at the hand level when human skull DXTTR {iota}{iota}{iota} was exposed with portable X-ray unit 6.39 {mu}Gy, and the mean dose with fixed X-ray unit 3.03 {mu}Gy (p<0.001). The mean dose at the immediate side of the tube head part when air was exposed with portable X-ray unit was 2.97 {mu}Gy and with fixed X-ray unit the mean dose was 0.68 {mu}Gy (p<0.01). The leakage and scattered radiation from hand-held dental radiography was greater than from fixed dental radiography.

Restorative Rehabilitation of a Patient with Dental Erosion.

Science.gov (United States)

AlShahrani, Mohammed Thamer; Haralur, Satheesh B; Alqarni, Mohammed

2017-01-01

Dental erosion is the chemical dissolution of the tooth structure. Factors like eating disorders and gastrointestinal diseases are recognized as intrinsic factors for dental erosion. Advanced stages of dental erosion extensively damage the tooth morphology, consequently affecting both esthetics and functions. Reports indicate the growing prevalence of erosion, and hence knowledge of restorative rehabilitation of tooth erosion is an integral part of the contemporary dental practice. This clinical report describes an adult patient with gastroesophageal reflux induced dental erosion involving the palatal surface of the maxillary anterior teeth. The extensive involvement of the palatal surfaces compromised the esthetics, incisal guidance, and functional occlusal efficiency. Indirect all-ceramic restorations were utilized to restore the esthetics and occlusal reconstruction. In conclusion, patients affected by severe dental erosion require prosthetic rehabilitation besides the management of the associated medical condition.

Restorative Rehabilitation of a Patient with Dental Erosion

Directory of Open Access Journals (Sweden)

Mohammed Thamer AlShahrani

2017-01-01

Full Text Available Dental erosion is the chemical dissolution of the tooth structure. Factors like eating disorders and gastrointestinal diseases are recognized as intrinsic factors for dental erosion. Advanced stages of dental erosion extensively damage the tooth morphology, consequently affecting both esthetics and functions. Reports indicate the growing prevalence of erosion, and hence knowledge of restorative rehabilitation of tooth erosion is an integral part of the contemporary dental practice. This clinical report describes an adult patient with gastroesophageal reflux induced dental erosion involving the palatal surface of the maxillary anterior teeth. The extensive involvement of the palatal surfaces compromised the esthetics, incisal guidance, and functional occlusal efficiency. Indirect all-ceramic restorations were utilized to restore the esthetics and occlusal reconstruction. In conclusion, patients affected by severe dental erosion require prosthetic rehabilitation besides the management of the associated medical condition.

Prevalence of secondary hyperparathyroidism in patients with stage 3 and 4 chronic kidney disease seen in internal medicine.

Science.gov (United States)

Bureo, Juan Carlos; Arévalo, Jose Carlos; Antón, Joaquín; Adrados, Gaspar; Jiménez Morales, Jose Luis; Robles, Nicolás Roberto

2015-01-01

Despite the high prevalence of chronic kidney disease in the elderly population, few data are available on the frequency of secondary hyperparathyroidism in the Spanish population affected by this problem. We undertook a study on this issue in patients attending the internal medicine departments in our area. An observational, cross-sectional survey performed at internal medicine departments on 415 patients with stage 3 and 4 chronic kidney disease. Clinical history and risk factors were collected using a standardized protocol. Serum creatinine, phosphate, calcium, intact parathormone (PTH) and 25-hydroxy-cholecalciferol (25-OH-vitD) levels were measured in all patients. Among stage 3 patients, 62.9% had PTH levels ≥70pg/mL and 32.7% levels ≥110pg/mL. Median PTH level in stage 4 patients was 120pg/mL (p <0.001), and 77.9% of these patients had PTH ≥70pg/mL (p <0.001) and 54.1% ≥110pg/mL (p=0.015). Adequate 25-hydroxy-cholecalciferol levels were found in only 7.2% of stage 3 patients and 4.1% of stage 4 patients. Only 7.2% of stage 3 patients had hyperphosphatemia, as compared to 25.4% of stage 4 patients (p <0.001). Hyperparathyroidism is a common complication of stage 3 and 4 chronic kidney disease which is not associated to detectable changes in serum calcium and phosphate levels. It is therefore advisable to measure PTH levels in all patients with decreased glomerular filtration rate. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.

Whole-body {sup 18}F-FDG PET/CT for M staging in the patient with newly diagnosed nasopharyngeal carcinoma: Who needs?

Energy Technology Data Exchange (ETDEWEB)

Ren, Yun-yan; Li, You-cai; Wu, Hu-bing, E-mail: wuhbym@163.com; Wang, Quan-shi; Han, Yan-jiang; Zhou, Wen-lan; Li, Hong-sheng

2017-04-15

Objective: Although whole-body fluorine-18 fluorodeoxyglucose ({sup 18}F-FDG) positron emission tomography (PET)/computed tomography (CT) ({sup 18}F-FDG PET/CT) is commonly used for M staging of newly diagnosed nasopharyngeal carcinoma (NPC), some patients may not benefit from this procedure. The present study investigated which patients require this modality for M staging. Methods: Whole-body {sup 18}F FDG PET/CT results and clinical data were collected for 264 patients with newly diagnosed NPC. The relationships between distant metastasis and age, gender, pathological type, lesion size, SUVmax-T, T staging, N staging, SUVmax-N and Epstein-Barr virus (EBV) quantity were retrospectively analysed to identify factors associated with increased risk. Results: Of the 264 patients, only 37 (14.0%) were diagnosed with distant metastasis. Using multiple logistic regression analysis, EBV-positivity (OR = 13.1; 95% CI:1.61,106.80), N staging (OR = 3.05; 95% CI:1.41,6.63) and T staging (OR = 2.16; 95% CI:1.10, 4.24) were significantly related to distant metastasis (all P < 0.05). EBV DNA levels ≥ 9000 copies/ml, N3 stage and T4 stage were identified as high risk factors. A low risk of distant metastasis was found in patients with 0–1 risk factors and in those with 2 specific risk factors, T3/T4 and N2/N3 staging. Patients with EBV DNA levels ≥9000 copies/ml and N3 or T4 staging and those with 3 risk factors had a medium or high risk, with a much higher incidence of distant metastasis (χ{sup 2} = 29.896, P = 0.000), and needed a whole-body {sup 18}F FDG PET/CT for M staging. Conclusions: Due to the low incidence of distant metastasis, only patients with medium or high risk need to undergo a whole-body scan.

Managing amalgam phase down: An evaluation of mercury vapor levels in a dental center in Lagos, Nigeria

Directory of Open Access Journals (Sweden)

Adolphous Odofin Loto

2017-01-01

Full Text Available Background: Occupational exposure to elemental mercury vapor in a dental setting is mainly through inhalation exposure during preparation, insertion, polishing, and removal of amalgam fillings including storage of amalgam waste before disposal. This study aims to determine the indoor air levels of elemental mercury vapor in the dental operatories and ancillary sites at the Lagos State University Teaching Hospital (LASUTH. Materials and Methods: Samples of the ambient air were taken at seven locations the Dental Center of LASUTH by a trained technician between 9:00 and 11:00 a.m. This was done at a predetermined height (41/2feet above the floor for mercury vapor concentration using Lumex 915 light data logger mercury vapor analyzer manufactured by Ohio Lumex Company Incorporation, USA®. Results: The highest level of 1434 ng/m3 of mercury vapor in the air was found in the restorative clinic while the lowest of 23 ng Hg/m3 was found in the ambient air at the entrance of the dental Center. The Oral Surgery clinic had mercury vapor level of 318 ng/m3 which was slightly higher than Environmental Protection Agency recommended value of 0.3 μg/m3. Conclusion: An unacceptably high level of mercury vapor was detected, especially in the restorative clinic. Every dental clinic should have its ambient air evaluated for mercury vapor level for the purpose of forming a baseline data for monitoring purposes during the period of phase down of amalgam use. Best practices should also be instituted to reduce the level of exposure of patients and dental care workers to mercury vapor.

Predictors of untreated dental decay among 15-34-year-old Australians.

Science.gov (United States)

Jamieson, Lisa M; Mejía, Gloria C; Slade, Gary D; Roberts-Thomson, Kaye F

2009-02-01

To determine predictors of untreated dental decay among 15-34-year-olds in Australia. Data were from Australia's National Survey of Adult Oral Health, a representative survey that utilized a three-stage, stratified clustered sampling design. Models representing demographic, socioeconomic, dental service utilization and oral health perception variables were tested using multivariable logistic regression to produce odds ratios. An estimated 25.8% (95% CI 22.4-29.5) of 15-34-year-old Australians had untreated dental decay. After controlling for other covariates, those who lived in a location other than a capital city had 2.0 times the odds of having untreated dental decay than their capital city-dwelling counterparts (95% CI 1.29-3.06). Similarly, those whose highest level of education was not a university degree had 2.1 times the odds of experiencing untreated dental decay (95% CI 1.35-3.31). Perceived need of extractions or restorations predicted untreated coronal decay, with 2.9 times the odds for those who perceived a treatment need over those with no such treatment need perception (95% CI 1.84-4.53). Participants who experienced dental fear had 2.2 times the odds of having untreated dental decay (95% CI 1.38-3.41), while those who reported experiencing toothache, orofacial pain or food avoidance in the last 12 months had 1.9 times the odds of having untreated dental decay than their counterparts with no such oral health-related quality-of-life impact (95% CI 1.20-2.92). The multivariate model achieved a 'useful' level of accuracy in predicting untreated decay (area under the ROC curve = 0.74; sensitivity = 0.63; specificity = 0.73). In the Australian young adult population, residential location, education level, perceived need for dental care, dental fear, toothache, orofacial pain or food avoidance together were predictors of untreated dental decay. The prediction model had acceptable specificity, indicating that it may be useful as part of a triage system for

Micellar casein concentrate production with a 3X, 3-stage, uniform transmembrane pressure ceramic membrane process at 50°C.

Science.gov (United States)

Hurt, E; Zulewska, J; Newbold, M; Barbano, D M

2010-12-01

The production of serum protein (SP) and micellar casein from skim milk can be accomplished using microfiltration (MF). Potential commercial applications exist for both SP and micellar casein. Our research objective was to determine the total SP removal and SP removal for each stage, and the composition of retentates and permeates, for a 3×, continuous bleed-and-feed, 3-stage, uniform transmembrane pressure (UTP) system with 0.1-μm ceramic membranes, when processing pasteurized skim milk at 50°C with 2 stages of water diafiltration. For each of 4 replicates, about 1,100 kg of skim milk was pasteurized (72°C, 16s) and processed at 3× through the UTP MF system. Retentate from stage 1 was cooled to <4°C and stored until the next processing day, when it was diluted with reverse osmosis water back to a 1× concentration and again processed through the MF system (stage 2) to a 3× concentration. The retentate from stage 2 was stored at <4°C, and, on the next processing day, was diluted with reverse osmosis water back to a 1× concentration, before running through the MF system at 3× for a total of 3 stages. The retentate and permeate from each stage were analyzed for total nitrogen, noncasein nitrogen, and nonprotein nitrogen using Kjeldahl methods; sodium dodecyl sulfate-PAGE analysis was also performed on the retentates from each stage. Theoretically, a 3-stage, 3× MF process could remove 97% of the SP from skim milk, with a cumulative SP removal of 68 and 90% after the first and second stages, respectively. The cumulative SP removal using a 3-stage, 3× MF process with a UTP system with 0.01-μm ceramic membranes in this experiment was 64.8 ± 0.8, 87.8 ± 1.6, and 98.3 ± 2.3% for the first, second, and third stages, respectively, when calculated using the mass of SP removed in the permeate of each stage. Various methods of calculation of SP removal were evaluated. Given the analytical limitations in the various methods for measuring SP removal, calculation

99mTc-MDP Bone Scan Findings in Various Clinical Stages of Malignancies

International Nuclear Information System (INIS)

Yoon, Hwi Joong; Lee, Myung Chul; Cho, Bo Yeon; Kim, Noe Kyeong; Koh, Chang Soon

1981-01-01

Bone scans with 99m Tc-MDP (methylene diphosphonate) were obtained and analysed in 574 from April, 1979 to June, 1931. Clinical staging was done in all patients without bone scan information and compared with bone scan to determine the predictive value of bone scanning. 1) Primary site of the malignancies were lung in 152, breast in 97, stomach in 43, colon in 15, esophagus in 9, liver and pancreas in 11, kidney in 14, bladder in 27, prostate in 22, thyroid in 20, skin in 11, bone in 9, head and neck in 36, ovary and uterus in 17, hematopoietic and lymphoretic ular system in 33, nervous system in 10, and others in 9 cases. Primary site was not defined in 39 cases. 2) Bone scans were positive in 186 cases (32.4%), which, included 48 cases (31.6%) of lung cancer, 27 cases (27.8%) of breast cancer, 12 cases (28%) of stomach cancer, 6 cases (40%) of colon cancer, 6 cases (43%) of kidney tumor, 4 cases (15%) of bladder cancer, 14 cases (64%) of prostate cancer, 3 cases (15%) of thyroid cancer and 66 other cases. 3) Bone scans were suspicious in 64 cases (11.2%) which included 29 cases (19.1%) of lung cancer, 10 cases (10.3%) of breast cancer, 4 cases (9.3%) of stomach cancer, one case (7%) of colon cancer, 3 cases (11%) of bladder cancer, 2 cases (10%) of thyroid cancer and 15 other cases. 4) Out of 121 cases with early stage of malignancy (which included 20 cases of lung cancer in stage I, II, 38 cases of breast cancer, 13 cases of stomach cancer, 8 cases of kidney tumor, 14 cases of thyroid cancer in stage I-III, and 6 cases of colon cancer, 14 cases of bladder cancer, 8 cases of prostate cancer in stage A-C, bone scans were positive in 5 cases (4.1%) which included 3 cases of lung cancer one case of breast cancer and one case of prostate cancer, and considered as further advanced stage, Out of 121 cases with early stage of malignancy, bone scans were suspicious in 21 cases (17.4%) which included 9 cases of lung cancer, 4 cases of breast cancer, 2 cases of stomach

3-dimensional orthodontics visualization system with dental study models and orthopantomograms

Science.gov (United States)

Zhang, Hua; Ong, S. H.; Foong, K. W. C.; Dhar, T.

2005-04-01

The aim of this study is to develop a system that provides 3-dimensional visualization of orthodontic treatments. Dental plaster models and corresponding orthopantomogram (dental panoramic tomogram) are first digitized and fed into the system. A semi-auto segmentation technique is applied to the plaster models to detect the dental arches, tooth interstices and gum margins, which are used to extract individual crown models. 3-dimensional representation of roots, generated by deforming generic tooth models with orthopantomogram using radial basis functions, is attached to corresponding crowns to enable visualization of complete teeth. An optional algorithm to close the gaps between deformed roots and actual crowns by using multi-quadratic radial basis functions is also presented, which is capable of generating smooth mesh representation of complete 3-dimensional teeth. User interface is carefully designed to achieve a flexible system with as much user friendliness as possible. Manual calibration and correction is possible throughout the data processing steps to compensate occasional misbehaviors of automatic procedures. By allowing the users to move and re-arrange individual teeth (with their roots) on a full dentition, this orthodontic visualization system provides an easy and accurate way of simulation and planning of orthodontic treatment. Its capability of presenting 3-dimensional root information with only study models and orthopantomogram is especially useful for patients who do not undergo CT scanning, which is not a routine procedure in most orthodontic cases.

One-stage closure of isolated cleft palate with the Veau-Wardill-Kilner V to Y pushback procedure or the Cronin modification. II. Height, weight and comparison of dental arches.

Science.gov (United States)

Heliövaara, A; Pere, A; Ranta, R

1994-03-01

The body height and weight, and sizes of dental arches in 116 patients with isolated cleft palate were evaluated at 16.9-20.6 years of age. One-stage closure of the soft and hard palate had been done at a mean age of 1.8 years using the Veau-Wardill-Kilner or the Cronin mucoperiosteal palatal V-Y pushback technique. The height attained in both the boys (177.6 cm) and the girls (165.7 cm) was similar to that in the general adult population, even though half of the boys had not reached their final height. The median relative weight for height and sex was 6%. There were no significant differences in dental arch measurements depending on the method of operation but the more palatal operations done the shorter the maxillary and mandibular dental arch widths. The extent of cleft made a significant difference, larger clefts having narrower palatal intercanine widths. Dental arch dimensions were consistently larger in boys than in girls.

Gender differences in first-year dental students' motivation to attend dental school.

Science.gov (United States)

Scarbecz, Mark; Ross, Judith A

2002-08-01

Women's role in the field of dentistry has historically been limited to the dental auxiliary fields, rather than that of D.D.S. or D.M.D. Today, women are nearly 38 percent of U.S. dental school students and 14 percent of active practitioners. The slow(er) influx of women into dentistry has been little studied by dental educators. During the 2000-01 academic year, we conducted a survey of first-year dental students at a sample of publicly funded U.S. dental schools. The purpose of the survey was to assess gender differences in motives for pursuing a dental career. The data show that male dental students rate self-employment and business-related motives as more important, while female dental students rate people-oriented motives more highly. Factor analysis revealed four distinct clusters of motives for pursuing a dental career: a financial motive, a business-oriented motive, a people-oriented or caring motive, and a flexibility motive. Women scored significantly higher than men on the caring factor, whereas the reverse was true on the business factor. Male and female students rated financial and flexibility motives equally. The implications of the results for attracting students to the profession of dentistry are discussed.

U.S. dental students' attitudes toward research and science: impact of research experience.

Science.gov (United States)

Holman, Shaina Devi; Wietecha, Mateusz S; Gullard, Angela; Peterson, Jon M B

2014-03-01

This study aimed to provide a first nationwide assessment of dental students' attitudes toward the importance of research and its integration into the dental curriculum. For this purpose, the American Association for Dental Research National Student Research Group developed an online survey that was distributed to 89 percent of U.S. dental students in May 2012. The survey consisted of twenty-one Likert-type items divided into three groups: importance of research in dentistry, barriers to research involvement, and exposure to research in the dental curriculum. There were 733 responses (3.9 percent response rate), including students in all stages of education representing fifty-eight out of sixty-one dental schools. Age and race/ethnic distributions corresponded with U.S. dental school enrollees. Results showed that 63 percent of respondents had conducted research before matriculation, and of the 34 percent that participated in research during dental school, only 27 percent were newcomers. Respondents strongly agreed that scientific research enabled their progress in dentistry. Inadequate time in the curriculum was an obstacle they perceived to research involvement during dental school. Respondents agreed that dental curricula emphasize evidence-based practices but may be inadequately teaching biostatistics and research methodologies. Students with research experience tended to have stronger positive opinions about the importance of research in dental education. Efforts to foster research in schools have been well received by students, but several issues remain for enriching dental education through greater involvement of students in research.

Reasons for late seeking of dental care among dental patients ...

African Journals Online (AJOL)

Reasons for delayed reporting for oral care were negligence (53.5%); poor dental services or visited but not treated (19.4%); financial reasons (14.8%); and dental fear (12.3%). Seventy seven percent of respondents who had toothache due to advanced dental caries were aware that the aching tooth was decayed, of which, ...

The possible usability of three-dimensional cone beam computed dental tomography in dental research

Science.gov (United States)

Yavuz, I.; Rizal, M. F.; Kiswanjaya, B.

2017-08-01

The innovations and advantages of three-dimensional cone beam computed dental tomography (3D CBCT) are continually growing for its potential use in dental research. Imaging techniques are important for planning research in dentistry. Newly improved 3D CBCT imaging systems and accessory computer programs have recently been proven effective for use in dental research. The aim of this study is to introduce 3D CBCT and open a window for future research possibilities that should be given attention in dental research.

Use of β-caryophyllene to combat bacterial dental plaque formation in dogs.

Science.gov (United States)

Pieri, Fábio Alessandro; Souza, Marina Campos de Castro; Vermelho, Ligia Lobato Ramos; Vermelho, Marina Lobato Ramos; Perciano, Pedro Griffo; Vargas, Fabiano Souza; Borges, Andréa Pacheco Batista; da Veiga-Junior, Valdir Florêncio; Moreira, Maria Aparecida Scatamburlo

2016-10-01

Periodontal disease is a highly prevalent illness that affects many dogs, reaching up to 85 % prevalence in individuals over the age of 4 years. Currently the drug of choice for combating the formation of dental plaque in these animals, the etiologic agent of the disease, is chlorhexidine, which has several side effects reported. Thus, surveys are conducted throughout the world in order to identify potential substitutes for antimicrobial therapy and prevention of periodontal disease. The objective of the work was to evaluate the antimicrobial activity of β-caryophyllene against bacteria from dog's dental plaque in vitro and in vivo. The minimum inhibitory concentration was evaluated by agar microdilution assay, the induction or inhibition of bacterial adherence by sub-inhibitory concentrations in 96-well plates, and reduction of dental plaque formation in mongrel dogs subjected to topical solution with β-caryophyllene for 15 days. Results showed minimum inhibitory concentrations above 100 mg/mL for 25 % of the isolates, 100 mg/mL for 3 %, 50 mg/mL for 25 %, 25 mg/mL for 12 %, 12.5 mg/mL for 19 % and 6.25 mg/mL for 16 %. Bacterial adherences of three Enterococcus sp., one Streptococcus sp., one Haemophilus sp., one Aerococcus sp., one Bacillus sp. and one Lactococcus sp. isolates were inhibited by subinhibitory concentration. One Lactococcus sp., one Bacillus sp. and one Streptococcus sp. were stimulated to adhere by concentrations of 0.19, 1.56 and 0.78 mg/mL, respectively. In vivo assay showed reduction in dental plaque formation by β-caryophyllene, with final plaque coverage of 23.3 ± 2.6 % of the total area of the teeth, with significant difference compared with chlorhexidine group (37.5 ± 3.7 % - p dog's dental plaque-forming bacteria representing a suitable alternative to the use of chlorhexidine in prophylaxis and treatment of periodontal disease of dogs.

Diagnosing dental caries in populations with different levels of dental fluorosis

DEFF Research Database (Denmark)

Nyvad, Bente; Machiulskiene, Vita; Fejerskov, Ole

2009-01-01

concentrations of 0.3 and 1.1 ppm (0.3 and 1.1 mg/l) fluoride, respectively, 150 children were clinically examined twice, 2 wk apart, for dental fluorosis, using the Thylstrup-Fejerskov index (TF index), and for dental caries using the Nyvad visual-tactile caries criteria. The prevalence of dental fluorosis......, a pronounced dental fluorosis background did not reduce the reliability of the caries recordings, which appeared to be slightly less reliable at very low levels of dental fluorosis.......The aim of this study was to assess the reliability of the Nyvad visual-tactile caries-diagnostic criteria when used among children who have been lifelong residents in areas with 'optimal' or low concentrations of fluoride in the drinking water. In each of two areas with drinking water fluoride...

The role of women in dental education: monitoring the pipeline to leadership.

Science.gov (United States)

Reed, Michael J; Corry, Ann Marie; Liu, Ying W

2012-11-01

The purpose of this study was to analyze data collected by the American Dental Association and the American Dental Education Association over the past two decades relating to changes in the number of women active in dental education and dental practice. The concept of a pipeline of women in dentistry was explored by analyzing predoctoral, postdoctoral, dental practice, and dental education domains for the inclusion of women. Statistical analyses show that there has been a consistent and progressive increase in the number of women in all stages of the pipeline. Over the past two decades, the number of female students attending and graduating from dental school has steadily increased. In 1984-85, 23.7 percent of all predoctoral students were women; in 2009-10, 45.1 percent were women. Similarly, in 1999, the graduating class was 35.3 percent women; in 2009, it was 46.1 percent women. In the postdoctoral domain, in 1996, 29.9 percent of all residents were women; in 2010, this had increased to 39.0 percent. In dental practice, the number of actively licensed women dentists in 1999 was 15.3 percent of the workforce; in 2010, this percentage had grown to 24.0 percent. In dental education, the number of women clinical faculty members has gradually increased from 669 in 1997-98 to 902 in 2007-08. Until 2000, there had been only two women deans and very few associate/assistant deans, with only sixteen in 1990. In 2000, major changes began with three women deans and seventy-two women associate/assistant deans. In 2009-10, there were 111 associate/assistant women deans and twelve women deans. These data show a progressive increase in the presence of women in all domains of dentistry, especially in leadership positions in dental education.

Prototyping of Dental Structures Using Laser Milling

Science.gov (United States)

Andreev, A. O.; Kosenko, M. S.; Petrovskiy, V. N.; Mironov, V. D.

2016-02-01

The results of experimental studies of the effect of an ytterbium fiber laser radiation parameters on processing efficiency and quality of ZrO2 ceramics widely used in stomatology are presented. Laser operating conditions with optimum characteristics for obtaining high quality final surfaces and rapid material removal of dental structures are determined. The ability of forming thin-walled ceramic structures by laser milling technology (a minimum wall thickness of 50 μm) is demonstrated. The examples of three-dimensional dental structures created in computer 3D-models of human teeth using laser milling are shown.

Learning stage-dependent effect of M1 disruption on value-based motor decisions.

Science.gov (United States)

Derosiere, Gerard; Vassiliadis, Pierre; Demaret, Sophie; Zénon, Alexandre; Duque, Julie

2017-11-15

The present study aimed at characterizing the impact of M1 disruption on the implementation of implicit value information in motor decisions, at both early stages (during reinforcement learning) and late stages (after consolidation) of action value encoding. Fifty subjects performed, over three consecutive days, a task that required them to select between two finger responses according to the color (instruction) and to the shape (implicit, undisclosed rule) of an imperative signal: considering the implicit rule in addition to the instruction allowed subjects to earn more money. We investigated the functional contribution of M1 to the implementation of the implicit rule in subjects' motor decisions. Continuous theta burst stimulation (cTBS) was applied over M1 either on Day 1 or on Day 3, producing a temporary lesion either during reinforcement learning (cTBS Learning group) or after consolidation of the implicit rule, during decision-making (cTBS Decision group), respectively. Interestingly, disrupting M1 activity on Day 1 improved the reliance on the implicit rule, plausibly because M1 cTBS increased dopamine release in the putamen in an indirect way. This finding corroborates the view that cTBS may affect activity in unstimulated areas, such as the basal ganglia. Notably, this effect was short-lasting; it did not persist overnight, suggesting that the functional integrity of M1 during learning is a prerequisite for the consolidation of implicit value information to occur. Besides, cTBS over M1 did not impact the use of the implicit rule when applied on Day 3, although it did so when applied on Day 2 in a recent study where the reliance on the implicit rule declined following cTBS (Derosiere et al., 2017). Overall, these findings indicate that the human M1 is functionally involved in the consolidation and implementation of implicit value information underlying motor decisions. However, M1 contribution seems to vanish as subjects become more experienced in using

Two-Stage n-PSK Partitioning Carrier Phase Recovery Scheme for Circular mQAM Coherent Optical Systems

DEFF Research Database (Denmark)

Rodrigo Navarro, Jaime; Kakkar, Aditya; Pang, Xiaodan

2016-01-01

(ΔνTs) tolerance is achieved compared to the single-stage n-PSK partitioning scheme. Superior performance in the ΔνTs tolerance compared to the blind phase search algorithm is also reported. The relative improvements with respect to other CPR schemes are also validated experimentally for a 28-Gbaud C......A novel two-stage n-PSK partitioning carrier phase recovery (CPR) scheme for circular multilevel quadrature amplitude modulation (C-mQAM) constellations is presented. The first stage of the algorithm provides an initial rough estimation of the received constellation, which is utilized in the second...... stage for CPR. The performance of the proposed algorithm is studied through extensive simulations at the forward error correction bit error rate targets of 3.8 × 10−3 and 1 × 10−2 and is compared with different CPR algorithms. A significant improvement in the combined linewidth symbol duration product...

Education About Dental Hygienists' Roles in Public Dental Prevention Programs: Dental and Dental Hygiene Students' and Faculty Members' and Dental Hygienists' Perspectives.

Science.gov (United States)

Pervez, Anushey; Kinney, Janet S; Gwozdek, Anne; Farrell, Christine M; Inglehart, Marita R

2016-09-01

In 2005, Public Act No. 161 (PA 161) was passed in Michigan, allowing dental hygienists to practice in approved public dental prevention programs to provide services for underserved populations while utilizing a collaborative agreement with a supervising dentist. The aims of this study were to assess how well dental and dental hygiene students and faculty members and practicing dental hygienists have been educated about PA 161, what attitudes and knowledge about the act they have, and how interested they are in additional education about it. University of Michigan dental and dental hygiene students and faculty members, students in other Michigan dental hygiene programs, and dental hygienists in the state were surveyed. Respondents (response rate) were 160 dental students (50%), 63 dental hygiene students (82%), 30 dental faculty members (26%), and 12 dental hygiene faculty members (52%) at the University of Michigan; 143 dental hygiene students in other programs (20%); and 95 members of the Michigan Dental Hygienists' Association (10%). The results showed that the dental students were less educated about PA 161 than the dental hygiene students, and the dental faculty members were less informed than the dental hygiene faculty members and dental hygienists. Responding dental hygiene faculty members and dental hygienists had more positive attitudes about PA 161 than did the students and dental faculty members. Most of the dental hygiene faculty members and dental hygienists knew a person providing services in a PA 161 program. Most dental hygiene students, faculty members, and dental hygienists wanted more education about PA 161. Overall, the better educated about the program the respondents were, the more positive their attitudes, and the more interested they were in learning more.

Dental maturation, eruption, and gingival emergence in the upper jaw of newborn primates.

Science.gov (United States)

Smith, Timothy D; Muchlinski, Magdalena N; Jankord, Kathryn D; Progar, Abbigal J; Bonar, Christopher J; Evans, Sian; Williams, Lawrence; Vinyard, Christopher J; Deleon, Valerie B

2015-12-01

In this report we provide data on dental eruption and tooth germ maturation at birth in a large sample constituting the broadest array of non-human primates studied to date. Over 100 perinatal primates, obtained from natural captive deaths, were screened for characteristics indicating premature birth, and were subsequently studied using a combination of histology and micro-CT. Results reveal one probable unifying characteristic of living primates: relatively advanced maturation of deciduous teeth and M1 at birth. Beyond this, there is great diversity in the status of tooth eruption and maturation (dental stage) in the newborn primate. Contrasting strategies in producing a masticatory battery are already apparent at birth in strepsirrhines and anthropoids. Results show that dental maturation and eruption schedules are potentially independently co-opted as different strategies for attaining feeding independence. The most common strategy in strepsirrhines is accelerating eruption and the maturation of the permanent dentition, including replacement teeth. Anthropoids, with only few exceptions, accelerate mineralization of the deciduous teeth, while delaying development of all permanent teeth except M1. These results also show that no living primate resembles the altricial tree shrew (Tupaia) in dental development. Our preliminary observations suggest that ecological explanations, such as diet, provide an explanation for certain morphological variations at birth. These results confirm previous work on perinatal indriids indicating that these and other primates telegraph their feeding adaptations well before masticatory anatomy is functional. Quantitative analyses are required to decipher specific dietary and other influences on dental size and maturation in the newborn primate. © 2015 Wiley Periodicals, Inc.

Clinical application of helical CT 3D reconstruction for the dental orthopaedics

International Nuclear Information System (INIS)

Han Benyi; Jiang Xiaolu; Li Hongru

2005-01-01

Objective: To evaluate the clinical application of helical CT 3D reconstruction technique in the dental orthopaedics. Methods: The helical CT was performed with 3.0 mm slice thickness and 1.0 pitch in 41 patients with dental orthopaedics. The 3D reconstructions, including maximum intensity projection (MIP), surface shaded display (SSD), and multiplanar reconstructions (MPR), were made for all the cases. Results: Thirty-seven of the 41 patients showed malalignment, tilt, rotation, overlap of the teeth and the different space between the longitudinal axes of the teeth. Twenty-five cases of them have shown 36 buried teeth in all. The axial images covered all the information. SSD demonstrated the external contours and entire morphologies of the teeth and the mandible with the relationship of the teeth alignment and the mandible. MIP clearly manifested the full view and the longitudinal alignment of the teeth. Among the 36 buried teeth, there were 29 palatally and 7 labially presented teeth, and they were morphologically delineated on MIP through various angles. Conclusion: The helical CT 3D reconstruction is a new technique to display the stereoscopic configuration of teeth. The combination of axial images and MIP, SSD, and MPR provides valuable anatomic and diagnostic information helpful for the surgeons to structure and determine the treatment protocol for the dental orthopaedics. (authors)

Satisfaction with Dental Appearance and Attitude toward improving Dental Esthetics among Patients attending a Dental Teaching Center.

Science.gov (United States)

Maghaireh, Ghada A; Alzraikat, Hanan; Taha, Nessrin A

2016-01-01

The aim of this study was to evaluate the factors influencing the satisfaction of dental appearance and attitude toward treatments to improve dental esthetics among patients attending a dental teaching center. A questionnaire was used to collect data of four background variables among 450 patients attended a dental teaching center in the city of Irbid in Jordan. The questionnaire enclosed self-reported questions about the appearance of anterior teeth, received esthetic treatment and desired treatment for improving esthetics. Descriptive, multiple logistic regression and Chi-square tests were used for data analysis (p ≤ 0.05). The 450 participants consisted of (66.2%) male and (33.8%) female. Of these, 69.3% were satisfied with their dental appearance and 58.0% with the color of their teeth. Esthetic restorations were the most received treatment (39.8%) and whitening of teeth was the most desired treatment (55.3%). The patients' satisfaction with dental appearance was influenced by teeth color, crowding and receiving whitening (p < 0.05. r = 0.561, r(2) = 0.315). The most desired esthetic treatments influenced by the satisfaction with dental appearance were esthetic restorations and orthodontics (p < 0.05. r = 0.223, r(2) = 0.05). Significantly more female reported having esthetic restorations and orthodontics (p = 0.008, 0.000) and desired to have orthodontic, crowns or veneers and esthetic restorations (p = 0.000, 0.015, 0.028). Satisfaction with dental appearance was affected by teeth color, feeling teeth are crowded, desire for esthetic restorations and orthodontic treatment. A high percentage of patients were not satisfied with the color of their teeth. Recognizing the factors that affect patients' satisfaction with their present dental appearance and attitude toward treatments to improve dental esthetic can guide clinicians to strategies to improve esthetics.

3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up.

Science.gov (United States)

Tunchel, Samy; Blay, Alberto; Kolerman, Roni; Mijiritsky, Eitan; Shibli, Jamil Awad

2016-01-01

This prospective 3-year follow-up clinical study evaluated the survival and success rates of 3DP/AM titanium dental implants to support single implant-supported restorations. After 3 years of loading, clinical, radiographic, and prosthetic parameters were assessed; the implant survival and the implant-crown success were evaluated. Eighty-two patients (44 males, 38 females; age range 26-67 years) were enrolled in the present study. A total of 110 3DP/AM titanium dental implants (65 maxilla, 45 mandible) were installed: 75 in healed alveolar ridges and 35 in postextraction sockets. The prosthetic restorations included 110 single crowns (SCs). After 3 years of loading, six implants failed, for an overall implant survival rate of 94.5%; among the 104 surviving implant-supported restorations, 6 showed complications and were therefore considered unsuccessful, for an implant-crown success of 94.3%. The mean distance between the implant shoulder and the first visible bone-implant contact was 0.75 mm (±0.32) and 0.89 (±0.45) after 1 and 3 years of loading, respectively. 3DP/AM titanium dental implants seem to represent a successful clinical option for the rehabilitation of single-tooth gaps in both jaws, at least until 3-year period. Further, long-term clinical studies are needed to confirm the present results.

3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up

Directory of Open Access Journals (Sweden)

Samy Tunchel

2016-01-01

Full Text Available This prospective 3-year follow-up clinical study evaluated the survival and success rates of 3DP/AM titanium dental implants to support single implant-supported restorations. After 3 years of loading, clinical, radiographic, and prosthetic parameters were assessed; the implant survival and the implant-crown success were evaluated. Eighty-two patients (44 males, 38 females; age range 26–67 years were enrolled in the present study. A total of 110 3DP/AM titanium dental implants (65 maxilla, 45 mandible were installed: 75 in healed alveolar ridges and 35 in postextraction sockets. The prosthetic restorations included 110 single crowns (SCs. After 3 years of loading, six implants failed, for an overall implant survival rate of 94.5%; among the 104 surviving implant-supported restorations, 6 showed complications and were therefore considered unsuccessful, for an implant-crown success of 94.3%. The mean distance between the implant shoulder and the first visible bone-implant contact was 0.75 mm (±0.32 and 0.89 (±0.45 after 1 and 3 years of loading, respectively. 3DP/AM titanium dental implants seem to represent a successful clinical option for the rehabilitation of single-tooth gaps in both jaws, at least until 3-year period. Further, long-term clinical studies are needed to confirm the present results.

Characterization of the 20 kHz transient MHD burst at the fast U-3M confinement modification stage

Science.gov (United States)

Dreval, M. B.; Pavlichenko, R. O.; Shapoval, A. M.; Pashnev, V. K.; Sorokovoy, E. L.; Slavnyj, A. S.; Beletskii, A. A.; Mironov, Yu K.; Romanov, V. S.; Kulaga, A. E.; Zamanov, N. V.

2018-05-01

In the URAGAN-3M (U-3M) torsatron the low-frequency transient 20–30 kHz mode is observed during the plasma confinement transition that occurs at a plasma current value of about 1 kA. The burst of this mode is always accompanied by the fast jump of the Alfvén eigenmode frequency. The transient 20–30 kHz mode contains two parts. The non-rotating part of the mode has higher amplitude and is localized in the stochastic region of the plasma. It is observed only in the vicinity of the radio-frequency antenna used for plasma production and does not propagate along the torus because of fast losses. Its high amplitude indicates that the major part of the 20–30 kHz mode is excited in the stochastic region near the antenna. In contrast, the second rotating part of the mode is localized everywhere along the torus near the plasma edge (ρ = 0.8–1). This is the n/m = 1/2 mode that rotates in the electron diamagnetic direction. It is observed in different toroidal cross-sections by various diagnostics (magnetic probe array, optics, Langmuir probe). Appearance of the 1/2 rational surface at the stochastic magnetic field line region near the plasma edge at 1 kA plasma current stage can be responsible for the mode generation. Modification of electron component gradients in the mode generation region near the antenna and the drop of the fast ion concentration (above 1 keV) in this region are observed simultaneously with the mode generation. The mode can be exited by the strong transient plasma gradients generated in the vicinity of the rational surface by the antenna.

Dental students′ compliance with antibiotic prescribing guidelines for dental infections in children

Directory of Open Access Journals (Sweden)

Yee Chen Wong

2016-01-01

Full Text Available Context: To investigate the antibiotic prescribing training received by dental students, clinical experience in treating child patients, awareness of antibiotic prescribing guidelines, preparedness in antibiotic prescribing, and compliance with antibiotic prescribing guidelines for the management of dental infections in children. Methods: This was a cross-sectional study involving final year dentals students from Malaysian and Asian dental schools. A self-administered questionnaire consisting of five clinical case scenarios was e-mailed to all final year students at selected dental schools. Students′ responses were compared for each clinical case scenario with the prescribing guidelines of the American Academy of Pediatric Dentistry and the American Dental Association. Compliance in each scenario was tested for association with their preparedness in antibiotic prescribing, previous training on antibiotic prescribing and awareness of antibiotic prescribing guidelines using Chi-square test. Data collected were analyzed using SPSS statistics version 20. Results: A total of 108 completed responses were received. About 74 (69% students were from Malaysian dental schools. The compliance rate with prescribing guidelines ranged from 15.7% to 43.5%. Those attending Malaysian dental schools (47.3% and those who had treated child patient more often (46.3% were more likely (P < 0.05 to be aware of the guidelines. Those who had received antibiotic prescribing training (21.3% were more likely to think they were well prepared in antibiotic prescribing (P < 0.05. Conclusions: Final year dental students had low awareness and compliance with antibiotic prescribing guidelines. Further research is needed to investigate how compliance with the guidelines may be enhanced.

Inhibition of the Quorum Sensing System (ComDE Pathway) by Aromatic 1,3-di-m-tolylurea (DMTU): Cariostatic Effect with Fluoride in Wistar Rats

OpenAIRE

Kaur, Gurmeet; Balamurugan, P.; Princy, S. Adline

2017-01-01

Dental caries occurs as a result of dysbiosis among commensal and pathogenic bacteria leading to demineralization of enamel within a dental biofilm (plaque) as a consequence of lower pH in the oral cavity. In our previous study, we have reported 1,3-disubstituted ureas particularly, 1,3-di-m-tolylurea (DMTU) could inhibit the biofilm formation along with lower concentrations of fluoride (31.25 ppm) without affecting bacterial growth. In the present study, RT-qPCR analysis showed the target sp...

Magnetic resonance tomography and dental radiology (Dental-MRT)

International Nuclear Information System (INIS)

Gahleitner, A.; Wien Univ.; Solar, P.; Ertl, L.; Nasel, C.; Homolka, P.; Youssefzadeh, S.; Schick, S.

1999-01-01

Purpose: To demonstrate the usefulness of Dental-MRT for imaging of anatomic and pathologic conditions of the mandible and maxilla. Methods: Seven healthy volunteers, 5 patients with pulpitis, 9 patients with dentigerous cysts, 5 patients after tooth transplantation and 12 patients with atrophic mandibles were evaluated. Studies of the jaws using axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been to performed. The acquired images were reconstructed with a standard dental software package on a workstation as panoramic and cross sectional views of the mandible or maxilla. Results: The entire maxilla and mandibula, teeth, dental pulp and the content of the mandibular canal were well depicted. Patients with inflammatory disease of the pulp chamber demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media application marked enhancement of the dental pulp can be found. Conclusion: Dental-MRT provides a valuable tool for visualization and detection of dental diseases. (orig.) [de

Dental Tissue — New Source for Stem Cells

Directory of Open Access Journals (Sweden)

Vladimir Petrovic

2009-01-01

Full Text Available Stem cells have been isolated from many tissues and organs, including dental tissue. Five types of dental stem cells have been established: dental pulp stem cells, stem cells from exfoliated deciduous teeth, stem cells from apical papilla, periodontal ligament stem cells, and dental follicle progenitor cells. The main characteristics of dental stem cells are their potential for multilineage differentiation and self-renewal capacity. Dental stem cells can differentiate into odontoblasts, adipocytes, neuronal-like cells, glial cells, osteoblasts, chondrocytes, melanocytes, myotubes, and endothelial cells. Possible application of these cells in various fields of medicine makes them good candidates for future research as a new, powerful tool for therapy. Although the possible use of these cells in therapeutic purposes and tooth tissue engineering is still in the beginning stages, the results are promising. The efforts made in the research of dental stem cells have clarified many mechanisms underlying the biological processes in which these cells are involved. This review will focus on the new findings in the field of dental stem cell research and on their potential use in the therapy of various disorders.

Long-period maintenance program of JRR-3M

International Nuclear Information System (INIS)

Murayama, Yoji; Onozaki, Michio; Kakefuda, Kazuhiro

1999-01-01

The JRR-3M is a swimming pool type research reactor with maximum thermal output of 20 MW, classed in a large-scale research reactor and composed of numerous facilities. An operation cycle consists of 4 weeks of continuously reactor operation and 1 week of shutdown work such as fuel exchange and irradiation sample handling. The temporary and small-scale maintenance is also carried out during the shutdown period. Systematic maintenance period through a year usually follows 2 stages. The former stage of about 4 weeks is prepared to maintain the general facilities related to the overall reactor system such as computer system. The latter stage of about 9 weeks is prepared to maintain the other individual facilities such as cooling facilities and control facilities that are to be inspected by the regulatory body. Since preventive maintenance is required in order to achieve an improvement of safety, reliability and availability throughout the life cycle of the reactor, a long-period maintenance program should be prepared properly in consideration of an ageing degradation of the facilities. The long-period maintenance program of JRR-3M, which determines not only the replacement frequency but also the maintenance frequency of the facilities, is made on the basis of an ageing degradation of the facilities, irradiation effects of the materials, recommendations from the manufacturer and JRR-3M maintenance records. The replacement frequency recommended by the manufacturer is examined from the viewpoint of the safety significance of the facilities and availability of the components. The program is arranged so that it may not concentrate the replacement of the facilities in the specific fiscal year and smooth the budget and maintenance period throughout the life cycle of the reactor. There have been two unanticipated failures of the facilities, which required rearranging the program. (author)

Anticipation of dental anomalies induced by radiation therapy

International Nuclear Information System (INIS)

Guggenheimer, J.; Fischer, W.G.; Pechersky, J.L.

1975-01-01

Therapeutic irradiation of the head and neck of children up to the age of 16 years can cause malformation and developmental arrest of the permanent teeth. Dental anomalies occurring after irradiation of the palatal tumor in an 8-year-old are described and compared with a normal 8-year-old's developmental sequence to demonstrate that the immature, noncalcified dental structures are most susceptible to radiation injury. The stage of dental development at the time of therapy may be precisely determined by a routine oral radiographic survey, which provides a reliable estimate of the deformation that may be anticipated following radiotherapy. (auth)

High and specialty-related musculoskeletal disorders afflict dental professionals even since early training years

Directory of Open Access Journals (Sweden)

Jianru YI

2013-07-01

Full Text Available OBJECTIVE: To determine how early musculoskeletal disorders (MSDs develop in dental professionals and to explore the potential differences among distinct dental specialties. MATERIAL AND METHODS: 271 dental postgraduates majoring in five dental specialties were recruited, i.e., orthodontics, prosthodontics, endodontics, periodontics and alveolar surgery. 254 age-matched non-dental postgraduates served as the control. The standardized Nordic questionnaire on MSDs and a self-report questionnaire regarding correlative factors (only for dental postgraduates were answered through emails. Reliability of responses was assessed applying test-retest method. RESULTS: The intraclass correlation coefficient of participants' answers ranged from 0.89 to 0.96. Dental postgraduates had significantly higher prevalence of MSDs than the control group, especially at neck, upper back and lower back. In all dental specialties included, high prevalence of MSDs was reported at neck (47.5%-69.8%, shoulders (50.8%-65.1%, lower back (27.1%-51.2% and upper back (25.6%-46.5%, with lower prevalence at elbows (5.1%-18.6%, hips (3.4%-16.3% and ankles (5.1%-11.6%. Periodontics students reported the worst MSDs in most body regions except wrists and knees, which were more prevalent for prosthodontic and alveolar surgery students, respectively. Furthermore, year of clinical work, clinical hours per week and desk hours per week were found as risk factors for MSDs, whereas physical exercise and rest between patients as protective factors. CONCLUSIONS: High and specialty-related MSDs afflict dental professionals even since very early stage of careers. Prevention aimed at the specialty-related characteristics and the risk/protective factors revealed in this study should be introduced to dental personnel as early as possible.

Magnetic resonance tomography and dental radiology (Dental-MRT); Die Magnetresonanztomographie in der Dentalradiologie (Dental-MRT)

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, A. [Wien Univ. (Austria). Abt. fuer Osteologie; Wien Univ. (Austria). Abt. fuer Orale Chirurgie; Solar, P.; Ertl, L. [Wien Univ. (Austria). Abt. fuer Orale Chirurgie; Nasel, C.; Homolka, P. [Wien Univ. (Austria). Inst. fuer Biomedizinische Technik und Physik; Youssefzadeh, S.; Schick, S. [Wien Univ. (Austria). Abt. fuer Osteologie

1999-12-01

Purpose: To demonstrate the usefulness of Dental-MRT for imaging of anatomic and pathologic conditions of the mandible and maxilla. Methods: Seven healthy volunteers, 5 patients with pulpitis, 9 patients with dentigerous cysts, 5 patients after tooth transplantation and 12 patients with atrophic mandibles were evaluated. Studies of the jaws using axial T1- and T2-weighted gradient echo and spin echo sequences in 2D and 3D technique have been to performed. The acquired images were reconstructed with a standard dental software package on a workstation as panoramic and cross sectional views of the mandible or maxilla. Results: The entire maxilla and mandibula, teeth, dental pulp and the content of the mandibular canal were well depicted. Patients with inflammatory disease of the pulp chamber demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media application marked enhancement of the dental pulp can be found. Conclusion: Dental-MRT provides a valuable tool for visualization and detection of dental diseases. (orig.) [German] Ziel dieses Beitrags ist die Vorstellung der Untersuchungsmoeglichkeiten des Ober- und Unterkiefers mittels Magnetresonanztomographie (Dental-MRT) und ihre Anwendung bei der Diagnose zahnmedizinischer Erkrankungen. Sieben gesunde Probanden, 5 Patienten mit Pulpitis, 9 Patienten mit dentogenen Zysten, 5 Patienten nach Zahntransplantationen und 12 Patienten mit atrophem Unterkiefer wurden untersucht. Axiale T1- und T2-gewichtete Gradientenecho- und Spinecho-Sequenzen in 2D und 3D-Technik wurden durchgefuehrt. Nach der Untersuchung wurden zusaetzliche Panoramaschnitte und orhoradiale Rekonstruktionen des Ober- und Unterkiefers, unter Verwendung einer gebraeuchlichen Dental-Software, angefertigt. Der gesamte Ober- oder Unterkiefer, Zaehne, Pulpa und der Inhalt des Mandibularkanals koennen gut dargestellt werden. Patienten mit einer Entzuendung der

Application of the ultrashort pulses in bovine dental enamel; Aplicacao de pulsos ultracurtos em esmalte dental bovino

Energy Technology Data Exchange (ETDEWEB)

Todescan, Carla de Rago

2003-07-01

The interaction of lasers with the hard structures of the teeth, has found the excess of heat as a problem for its utilization. This study analyzes, in vitro, the interaction of the ultrashort pulse laser of Ti:safire (830 nm) with the bovine dental enamel. The system consisted in one main oscillator integrated with an amplifier (CPA). The pulses extracted before the temporal compression inside the amplifier had 30 ps, 1000 Hz and {approx}1 mJ. The pulses extracted after the compression had 60 fs, 1000 Hz and {approx}0,7 mJ. The M{sup 2} was 1,3, the focal lens 2,5 cm, the focal distance 29,7 and a computerized translation stage x,y,z. We evaluated the amount of tissue removed per pulse,the resulting cavities and the surrounding tissues not irradiated, under OM and SEM. The fluency was the major factor for differentiating the two regimens studied, therefore, the intensity was not so important as we expected in this process. We found: one ablation region in 'cat tongue', one ablation length, one fluency {approx}0,7 J/cm{sup 2} for 30 ps and {approx}0,5 J/cm{sup 2} for 60 fs (50% of high speed burr), smooth edge for 30 ps and high precision of the sharp edge cut of submicrometric order for 60 fs. (author)

Application of the ultrashort pulses in bovine dental enamel; Aplicacao de pulsos ultracurtos em esmalte dental bovino

Energy Technology Data Exchange (ETDEWEB)

Todescan, Carla de Rago

2003-07-01

The interaction of lasers with the hard structures of the teeth, has found the excess of heat as a problem for its utilization. This study analyzes, in vitro, the interaction of the ultrashort pulse laser of Ti:safire (830 nm) with the bovine dental enamel. The system consisted in one main oscillator integrated with an amplifier (CPA). The pulses extracted before the temporal compression inside the amplifier had 30 ps, 1000 Hz and {approx}1 mJ. The pulses extracted after the compression had 60 fs, 1000 Hz and {approx}0,7 mJ. The M{sup 2} was 1,3, the focal lens 2,5 cm, the focal distance 29,7 and a computerized translation stage x,y,z. We evaluated the amount of tissue removed per pulse,the resulting cavities and the surrounding tissues not irradiated, under OM and SEM. The fluency was the major factor for differentiating the two regimens studied, therefore, the intensity was not so important as we expected in this process. We found: one ablation region in 'cat tongue', one ablation length, one fluency {approx}0,7 J/cm{sup 2} for 30 ps and {approx}0,5 J/cm{sup 2} for 60 fs (50% of high speed burr), smooth edge for 30 ps and high precision of the sharp edge cut of submicrometric order for 60 fs. (author)

Fabricating High-Quality 3D-Printed Alloys for Dental Applications

Directory of Open Access Journals (Sweden)

Min-Ho Hong

2017-07-01

Full Text Available Metal additive manufacturing (AM, especially selective laser melting (SLM, has been receiving particular attention because metallic functional structures with complicated configurations can be effectively fabricated using the technique. However, there still exist some future challenges for the fabrication of high-quality SLM products for dental applications. First, the surface quality of SLM products should be further improved by standardizing the laser process parameters or by appropriately post-treating the surface. Second, it should be guaranteed that dental SLM restorations have good dimensional accuracy and, in particular, a good marginal fit. Third, a definitive standard regarding building and scanning strategies, which affect the anisotropy, should be established to optimize the mechanical properties and fatigue resistance of SLM dental structures. Fourth, the SLM substructure’s bonding and support to veneering ceramic should be further studied to facilitate the use of esthetic dental restorations. Finally, the biocompatibility of SLM dental alloys should be carefully examined and improved to minimize the potential release of toxic metal ions from the alloys. Future research of SLM should focus on solving the above challenges, as well as on fabricating dental structures with “controlled” porosity.

Dental erosion: causes, diagnostics and treatment.

OpenAIRE

Cecilia Sosa-Puente; Juan Solís-Soto; Norma Cruz-Fierro; Sonia López-Villarreal; Sergio Nakagoshi-Cepeda

2014-01-01

Resumen: A pesar de ser un tópico altamente examinado, es difícil encontrar estudios que esclarezcan la problemática de la erosión dental. En este trabajo se analizó en la literatura los agentes que desencadenan la erosión dental, los principales métodos de diagnosis, los tratamientos más empleados en la actualidad y la interrelación con los materiales dentales. La etiología de la erosión es multifactorial incluyendo elementos ácidos, desórdenes alimenticios y reflujo gastroesofágico. Sin em...

Investigation of ultrashort-pulsed laser on dental hard tissue

Science.gov (United States)

Uchizono, Takeyuki; Awazu, Kunio; Igarashi, Akihiro; Kato, Junji; Hirai, Yoshito

2007-02-01

Ultrashort-pulsed laser (USPL) can ablate various materials with precious less thermal effect. In laser dentistry, to solve the problem that were the generation of crack and carbonized layer by irradiating with conventional laser such as Er:YAG and CO II laser, USPL has been studied to ablate dental hard tissues by several researchers. We investigated the effectiveness of ablation on dental hard tissues by USPL. In this study, Ti:sapphire laser as USPL was used. The laser parameter had the pulse duration of 130 fsec, 800nm wavelength, 1KHz of repetition rate and the average power density of 90~360W/cm2. Bovine root dentin plates and crown enamel plates were irradiated with USPL at 1mm/sec using moving stage. The irradiated samples were analyzed by SEM, EDX, FTIR and roughness meter. In all irradiated samples, the cavity margin and wall were sharp and steep, extremely. In irradiated dentin samples, the surface showed the opened dentin tubules and no smear layer. The Ca/P ratio by EDX measurement and the optical spectrum by FTIR measurement had no change on comparison irradiated samples and non-irradiated samples. These results confirmed that USPL could ablate dental hard tissue, precisely and non-thermally. In addition, the ablation depths of samples were 10μm, 20μm, and 60μm at 90 W/cm2, 180 W/cm2, and 360 W/cm2, approximately. Therefore, ablation depth by USPL depends on the average power density. USPL has the possibility that can control the precision and non-thermal ablation with depth direction by adjusting the irradiated average power density.

Combined effect of fluoride and 2,3,7,8-tetrachlorodibenzo-p-dioxin on mouse dental hard tissue formation in vitro.

Science.gov (United States)

Salmela, Eija; Lukinmaa, Pirjo-Liisa; Partanen, Anna-Maija; Sahlberg, Carin; Alaluusua, Satu

2011-08-01

Fluoride interferes with enamel matrix secretion and mineralization and dentin mineralization. The most toxic dioxin congener, 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), also impairs dental hard tissue formation and mineralization in vitro and in vivo. Our aim was to investigate in vitro whether the combined effect of sodium fluoride (NaF) and TCDD on dental hard tissue formation is potentiative. For this purpose, mandibular first and second molar tooth germs of E18 mouse embryos were cultured for 5-12 days with NaF and TCDD alone at various concentrations (2.5, 5, 10, 12.5, 15, and 20 μM and 5, 10, 12.5, and 15 nM, respectively) to determine the highest concentrations, which alone cause no or negligible effects. Morphological changes were studied from the whole tooth photographs and histological tissue sections. The concentrations found were 15 μM for NaF and 10 nM for TCDD. While at these concentrations, the effects of NaF and TCDD alone were barely detectable, the effect of simultaneous exposure on dentin and enamel formation was overt; mineralization of predentin to dentin and enamel matrix secretion and mineralization were impaired. Immunohistochemical analysis revealed that the combined exposure modified amelogenin expression by odontoblasts. Morphology of ameloblasts and the expression of amelogenin indicated that ameloblasts were still secretory. The results show that NaF and TCDD have potentiative, harmful effects on the formation of dental hard tissues. Since children can be exposed to subclinical levels of fluoride and dioxins during early childhood, coincidently with mineralization of the first permanent teeth, this finding may have clinical significance.

Legionella spp. in dental unit waterlines.

Science.gov (United States)

Sedlata Juraskova, E; Sedlackova, H; Janska, J; Holy, O; Lalova, I; Matouskova, I

2017-01-01

To determine the current presence of Legionella spp. in the output water of dental unit waterlines (DUWLs) and examine its mitigation by disinfection at the Institute of Dentistry and Oral Sciences, Faculty of Medicine and Dentistry, Palacky University Olomouc and University Hospital Olomouc. The first stage of our survey involved collecting samples of DUWL output water from 50 dental chair units (DCUs), and 2 samples of the incoming potable water. In October 2015, a one-time disinfection (1 % Stabimed) of DUWLs was conducted. This was followed by collecting 10 control samples (survey stage 2). From the total of 50 samples (survey stage 1), 18 samples (36.0 %) tested positive for Legionella spp. Following the disinfection, nine of the ten samples no longer showed any presence of Legionella. Based on culture results, the one-time disinfection (1 % Stabimed) was effective. We are unable to comment on the duration of positive effect of disinfection on the occurrence of Legionella spp. in the outlet water. It was a one-time survey (Tab. 2, Ref. 32).

The dynamics of TGF-β in dental pulp, odontoblasts and dentin.

Science.gov (United States)

Niwa, Takahiko; Yamakoshi, Yasuo; Yamazaki, Hajime; Karakida, Takeo; Chiba, Risako; Hu, Jan C-C; Nagano, Takatoshi; Yamamoto, Ryuji; Simmer, James P; Margolis, Henry C; Gomi, Kazuhiro

2018-03-13

Transforming growth factor-beta (TGF-β) is critical for cell proliferation and differentiation in dental pulp. Here, we show the dynamic mechanisms of TGF-β in porcine dental pulp, odontoblasts and dentin. The mRNA of latent TGF-β1 and TGF-β3 is predominantly expressed in odontoblasts, whereas the mRNA expression level of latent TGF-β2 is high in dental pulp. TGF-β1 is a major isoform of TGF-β, and latent TGF-β1, synthesized in dental pulp, is primarily activated by matrix metalloproteinase 11 (MMP11). Activated TGF-β1 enhances the mRNA expression levels of MMP20 and full-length dentin sialophosphoprotein (DSPP) in dental pulp cells, coinciding with the induction of odontoblast differentiation. Latent TGF-β1 synthesized in odontoblasts is primarily activated by MMP2 and MMP20 in both odontoblasts and dentin. The activity level of TGF-β1 was reduced in the dentin of MMP20 null mice, although the amount of latent TGF-β1 expression did not change between wild-type and MMP20 null mice. TGF-β1 activity was reduced with the degradation of DSPP-derived proteins that occurs with ageing. We propose that to exert its multiple biological functions, TGF-β1 is involved in a complicated dynamic interaction with matrix metalloproteinases (MMPs) and/or DSPP-derived proteins present in dental pulp, odontoblasts and dentin.

Effect of dental technician disparities on the 3-dimensional accuracy of definitive casts.

Science.gov (United States)

Emir, Faruk; Piskin, Bulent; Sipahi, Cumhur

2017-03-01

Studies that evaluated the effect of dental technician disparities on the accuracy of presectioned and postsectioned definitive casts are lacking. The purpose of this in vitro study was to evaluate the accuracy of presectioned and postsectioned definitive casts fabricated by different dental technicians by using a 3-dimensional computer-aided measurement method. An arch-shaped metal master model consisting of 5 abutments resembling prepared mandibular incisors, canines, and first molars and with a 6-degree total angle of convergence was designed and fabricated by computer-aided design and computer-aided manufacturing (CAD-CAM) technology. Complete arch impressions were made (N=110) from the master model, using polyvinyl siloxane (PVS) and delivered to 11 dental technicians. Each technician fabricated 10 definitive casts with dental stone, and the obtained casts were numbered. All casts were sectioned, and removable dies were obtained. The master model and the presectioned and postsectioned definitive casts were digitized with an extraoral scanner, and the virtual master model and virtual presectioned and postsectioned definitive casts were obtained. All definitive casts were compared with the master model by using computer-aided measurements, and the 3-dimensional accuracy of the definitive casts was determined with best fit alignment and represented in color-coded maps. Differences were analyzed using univariate analyses of variance, and the Tukey honest significant differences post hoc tests were used for multiple comparisons (α=.05). The accuracy of presectioned and postsectioned definitive casts was significantly affected by dental technician disparities (Ptechnician differences. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

DENTAL CONSIDERATIONS FOR LEUKEMIC PEDIATRIC PATIENTS: AN UPDATED REVIEW FOR GENERAL DENTAL PRACTITIONER.

Science.gov (United States)

Lowal, Kholoud A; Alaizari, Nader Ahmed; Tarakji, Bassel; Petro, Waleed; Hussain, Khaja Amjad; Altamimi, Mohamed Abdullah Alsakran

2015-10-01

The early signs of leukemia can usually manifest in the oral cavity due to infiltration of leukemic cells or due to associated decline in normal marrow elements, especially in the acute phase of leukemia, as common lesions at this stage of the disease can be screened and diagnosed by the dentist. Therefore, the dental community should be aware of the oral manifestations of leukemia and oral complications of anticancer treatment. This can eliminate the oral symptoms of the disease and to improve quality of life for these patients. An extensive search in PubMed line using a combination of terms like "leukemia, children, dental, Acute lymphoblastic leukemia, pediatric" for last ten years was made. Reviews and case reports concerned about acute lymphoblastic leukemia in children were all collected and analyzed and data were extracted. Accordingly, the aim of this review is to highlight on the oral presentations of leukemia in children attending dental clinics and the management of its undesirable side effects.

Dental Calculus Arrest of Dental Caries.

Science.gov (United States)

Keyes, Paul H; Rams, Thomas E

An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. These observations further document the potential protective effects of dental calculus mineralization against dental caries.

Dental Calculus Arrest of Dental Caries

Science.gov (United States)

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human teeth for the presence and location of dental caries, dental calculus, and dental plaque biofilms. Materials and methods A total of 1,200 teeth were preserved in 10% buffered formal saline, and viewed while moist by a single experienced examiner using a research stereomicroscope at 15-25× magnification. Representative teeth were sectioned and photographed, and their dental plaque biofilms subjected to gram-stain examination with light microscopy at 100× magnification. Results Dental calculus was observed on 1,140 (95%) of the extracted human teeth, and no dental carious lesions were found underlying dental calculus-covered surfaces on 1,139 of these teeth. However, dental calculus arrest of dental caries was found on one (0.54%) of 187 evaluated teeth that presented with unrestored proximal enamel caries. On the distal surface of a maxillary premolar tooth, dental calculus mineralization filled the outer surface cavitation of an incipient dental caries lesion. The dental calculus-covered carious lesion extended only slightly into enamel, and exhibited a brown pigmentation characteristic of inactive or arrested dental caries. In contrast, the tooth's mesial surface, without a superficial layer of dental calculus, had a large carious lesion going through enamel and deep into dentin. Conclusions These observations further document the potential protective effects of dental calculus mineralization against dental caries. PMID:27446993

Targeted p120-catenin ablation disrupts dental enamel development

DEFF Research Database (Denmark)

Bartlett, John D; Dobeck, Justine M; Tye, Coralee E

2010-01-01

Dental enamel development occurs in stages. The ameloblast cell layer is adjacent to, and is responsible for, enamel formation. When rodent pre-ameloblasts become tall columnar secretory-stage ameloblasts, they secrete enamel matrix proteins, and the ameloblasts start moving in rows that slide...... by one another. This movement is necessary to form the characteristic decussating enamel prism pattern. Thus, a dynamic system of intercellular interactions is required for proper enamel development. Cadherins are components of the adherens junction (AJ), and they span the cell membrane to mediate...... attachment to adjacent cells. p120 stabilizes cadherins by preventing their internalization and degradation. So, we asked if p120-mediated cadherin stability is important for dental enamel formation. Targeted p120 ablation in the mouse enamel organ had a striking effect. Secretory stage ameloblasts detached...

The Influence of Lifestyle on the Incidence of Dental Caries among 3-Year-Old Japanese Children

Science.gov (United States)

Watanabe, Masako; Wang, Da-Hong; Ijichi, Akihiro; Shirai, Chika; Zou, Yu; Kubo, Masayuki; Takemoto, Kei; Masatomi, Chie; Ogino, Keiki

2014-01-01

The present cohort study examined how lifestyle, household environment, and caries activity test score of Japanese children at age 1.5 years affected their dental caries incidence at age 3. Inclusion criteria were 1.5-year-old children with no dental caries. Dental examinations were performed for 33,655 children who participated in routine dental examinations at 1.5 years of age, and the exam was repeated approximately 21 months later (at age 3) at the Kobe City Public Health Center in Japan. After excluding 622 children who had caries at age 1.5 and 1831 children with missing lifestyle and household environment data in the questionnaires, the final data analysis was performed on a total of 31,202 children (16,052 boys, 15,150 girls).The multivariate logistic regression analysis indicated a strong association of the consumption of sugar-sweetened beverages/snacks, less frequent tooth brushing by the parents, lack of fluoride varnish, family history of smoking, with the risk of developing dental caries. A child’s late bedtime is also one of the major risk factors for dental caries development. Further investigation is needed to examine whether the short duration or the irregularity of the sleep-wake cycle would affect early childhood oral health and whether there is a relationship between late bedtime and late night snack intake. PMID:25489996

The Influence of Lifestyle on the Incidence of Dental Caries among 3-Year-Old Japanese Children

Directory of Open Access Journals (Sweden)

Masako Watanabe

2014-12-01

Full Text Available The present cohort study examined how lifestyle, household environment, and caries activity test score of Japanese children at age 1.5 years affected their dental caries incidence at age 3. Inclusion criteria were 1.5-year-old children with no dental caries. Dental examinations were performed for 33,655 children who participated in routine dental examinations at 1.5 years of age, and the exam was repeated approximately 21 months later (at age 3 at the Kobe City Public Health Center in Japan. After excluding 622 children who had caries at age 1.5 and 1831 children with missing lifestyle and household environment data in the questionnaires, the final data analysis was performed on a total of 31,202 children (16,052 boys, 15,150 girls.The multivariate logistic regression analysis indicated a strong association of the consumption of sugar-sweetened beverages/snacks, less frequent tooth brushing by the parents, lack of fluoride varnish, family history of smoking, with the risk of developing dental caries. A child’s late bedtime is also one of the major risk factors for dental caries development. Further investigation is needed to examine whether the short duration or the irregularity of the sleep-wake cycle would affect early childhood oral health and whether there is a relationship between late bedtime and late night snack intake.

A tissue-dependent hypothesis of dental caries.

Science.gov (United States)

Simón-Soro, A; Belda-Ferre, P; Cabrera-Rubio, R; Alcaraz, L D; Mira, A

2013-01-01

Current understanding of dental caries considers this disease a demineralization of the tooth tissues due to the acid produced by sugar-fermenting microorganisms. Thus, caries is considered a diet- and pH-dependent process. We present here the first metagenomic analysis of the bacterial communities present at different stages of caries development, with the aim of determining whether the bacterial composition and biochemical profile are specific to the tissue affected. The data show that microbial composition at the initial, enamel-affecting stage of caries is significantly different from that found at subsequent stages, as well as from dental plaque of sound tooth surfaces. Although the relative proportion of Streptococcus mutans increased from 0.12% in dental plaque to 0.72% in enamel caries, Streptococcus mitis and Streptococcus sanguinis were the dominant streptococci in these lesions. The functional profile of caries-associated bacterial communities indicates that genes involved in acid stress tolerance and dietary sugar fermentation are overrepresented only at the initial stage (enamel caries), whereas other genes coding for osmotic stress tolerance as well as collagenases and other proteases enabling dentin degradation are significantly overrepresented in dentin cavities. The results support a scenario in which pH and diet are determinants of the disease during the degradation of enamel, but in dentin caries lesions not only acidogenic but also proteolytic bacteria are involved. We propose that caries disease is a process of varying etiology, in which acid-producing bacteria are the vehicle to penetrate enamel and allow dentin degrading microorganisms to expand the cavity. © 2013 S. Karger AG, Basel.

Two-Stage n-PSK Partitioning Carrier Phase Recovery Scheme for Circular mQAM Coherent Optical Systems

Directory of Open Access Journals (Sweden)

Jaime Rodrigo Navarro

2016-06-01

Full Text Available A novel two-stage n-PSK partitioning carrier phase recovery (CPR scheme for circular multilevel quadrature amplitude modulation (C-mQAM constellations is presented. The first stage of the algorithm provides an initial rough estimation of the received constellation, which is utilized in the second stage for CPR. The performance of the proposed algorithm is studied through extensive simulations at the forward error correction bit error rate targets of 3.8 × 10−3 and 1 × 10−2 and is compared with different CPR algorithms. A significant improvement in the combined linewidth symbol duration product (ΔνTs tolerance is achieved compared to the single-stage n-PSK partitioning scheme. Superior performance in the ΔνTs tolerance compared to the blind phase search algorithm is also reported. The relative improvements with respect to other CPR schemes are also validated experimentally for a 28-Gbaud C-16QAM back-to-back transmission system. The computational complexity of the proposed CPR scheme is studied, and reduction factors of 24.5 | 30.1 and 59.1 | 63.3 are achieved for C-16QAM and C-64QAM, respectively, compared to single-stage BPS in the form of multipliers | adders.

[The 3D-printed dental splint: a valuable tool in the surgical treatment of malocclusion after polytrauma].

Science.gov (United States)

van de Velde, W L; Schepers, R H; van Minnen, B

2016-01-01

A 22-year old male was referred to the Department of Oral and Maxillofacial Surgery of a university clinic 2 months after he had sustained multiple traumatic injuries abroad because of an anterior malocclusion. The malocclusion was the sequel of an unrecognised, untreated, already consolidated paramedian mandibular fracture on the right and a fracture of the contralateral mandibular angle on the left. Preoperatively, a cobalt-chrome 3D-printed dental splint was prepared. Surgical correction of the malocclusion was carried out by segmental osteotomies of the mandible at the original fracture sites. This involved a vertical paramedian osteotomy on the right side and a unilateral sagittal split osteotomy on the left mandibular angle side. The mandibular segment was mobilised in the correct occlusion with the aid of the 3D-printed dental splint. The splint was fixed to the teeth with dental composite. The custom made 3D-printed dental splint is considered a promising procedural innovation in oral and maxillofacial surgery.

Fracture-resistant monolithic dental crowns.

Science.gov (United States)

Zhang, Yu; Mai, Zhisong; Barani, Amir; Bush, Mark; Lawn, Brian

2016-03-01

To quantify the splitting resistance of monolithic zirconia, lithium disilicate and nanoparticle-composite dental crowns. Fracture experiments were conducted on anatomically-correct monolithic crown structures cemented to standard dental composite dies, by axial loading of a hard sphere placed between the cusps. The structures were observed in situ during fracture testing, and critical loads to split the structures were measured. Extended finite element modeling (XFEM), with provision for step-by-step extension of embedded cracks, was employed to simulate full failure evolution. Experimental measurements and XFEM predictions were self-consistent within data scatter. In conjunction with a fracture mechanics equation for critical splitting load, the data were used to predict load-sustaining capacity for crowns on actual dentin substrates and for loading with a sphere of different size. Stages of crack propagation within the crown and support substrate were quantified. Zirconia crowns showed the highest fracture loads, lithium disilicate intermediate, and dental nanocomposite lowest. Dental nanocomposite crowns have comparable fracture resistance to natural enamel. The results confirm that monolithic crowns are able to sustain high bite forces. The analysis indicates what material and geometrical properties are important in optimizing crown performance and longevity. Copyright © 2015 Academy of Dental Materials. All rights reserved.

On dental caries and dental erosion in Swedish young adults.

Science.gov (United States)

Isaksson, Helén

2013-01-01

All children in Sweden are entitled to regular, free dental care up to 20 years of age. While dental caries generally continues to decline, still there is a pronounced skewness in caries prevalence. Furthermore, the reported increase in dental erosion in young adults is cause for concern. The aim was to study the prevalence of dental caries and dental erosion in a cohort of Swedish 20 year-olds, with special reference to the influence of previous caries experience and lifestyle as well as parental, socioeconomic and psychosocial factors. The study was prospective, longitudinal and cross-sectional in design and based on registration of caries lesions, dental erosion, body adiposity status, saliva sampling, interviews, and questionnaires at 20 years of age. Data were available for the same cohort at 1, 3, 6 and 15 years of age. 499 subjects (74 percent of the original cohort) were included. Five individuals were subsequently excluded, leaving a final sample of 494. 74 percent of the subjects had initial and/or manifest caries lesions and/or restorations. The mean number of DimFS was 5.8 and the mean number of DmFS on occlusal surfaces of molars was 1.1. There was a strong relationship between caries activity at 3 and 6 years of age and approximal caries prevalence in premolars and molars at 20 years of age. Overweight/obese individuals had significantly higher caries prevalence than normal weight individuals. Parental, socioeconomic and psychosocial factors during infancy were related to approximal caries at age 20. Dental erosion was found in 75 percent of the individuals: 18 percent of these had extensive erosion. There was a significant association between caries and dental erosion. A relationship was found between dental erosion and lifestyle factors and overweight/obesity. There is a strong relationship between caries prevalence at age 20 and caries experience in early childhood. Young adults show a high prevalence of dental erosion, but the severity is

Transforming growth factor-β-induced gene product-h3 inhibits odontoblastic differentiation of dental pulp cells.

Science.gov (United States)

Serita, Suguru; Tomokiyo, Atsushi; Hasegawa, Daigaku; Hamano, Sayuri; Sugii, Hideki; Yoshida, Shinichiro; Mizumachi, Hiroyuki; Mitarai, Hiromi; Monnouchi, Satoshi; Wada, Naohisa; Maeda, Hidefumi

2017-06-01

The aim of this study was to investigate transforming growth factor-β-induced gene product-h3 (βig-h3) expression in dental pulp tissue and its effects on odontoblastic differentiation of dental pulp cells (DPCs). A rat direct pulp capping model was prepared using perforated rat upper first molars capped with mineral trioxide aggregate cement. Human DPCs (HDPCs) were isolated from extracted teeth. βig-h3 expression in rat dental pulp tissue and HDPCs was assessed by immunostaining. Mineralization of HDPCs was assessed by Alizarin red-S staining. Odontoblast-related gene expression in HDPCs was analyzed by quantitative RT-PCR. Expression of βig-h3 was detected in rat dental pulp tissue, and attenuated by direct pulp capping, while expression of interleukin-1β and tumor necrosis factor-α was increased in exposed pulp tissue. βig-h3 expression was also detected in HDPCs, with reduced expression during odontoblastic differentiation. The above cytokines reduced βig-h3 expression in HDPCs, and promoted their mineralization. Recombinant βig-h3 inhibited the expression of odontoblast-related genes and mineralization of HDPCs, while knockdown of βig-h3 gene expression promoted the expression of odontoblast-related genes in HDPCs. The present findings suggest that βig-h3 in DPCs may be involved in reparative dentin formation and that its expression is likely to negatively regulate this process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Two-stage implant placement technique for the management of irradiated jaws: An animal study.

Science.gov (United States)

Aboushelib, Moustafa N; Arnaout, Mohamed A; Elsafi, Mohamed H; Kassem, Youssef M

2017-10-01

Radiotherapy results in diminished bone remodeling capacity and an elevated risk of osteoradionecrosis, which can negatively influence the survival rate of dental implants. Patients receiving radiotherapy are advised not to receive dental implants during or soon after completing their radiotherapy. The purpose of this animal study was to investigate a 2-stage implant placement technique designed to diminish applied trauma on irradiated bone. Two groups of white New Zealand rabbits received radiotherapy in ascending doses (2, 4, 8 Gy), while a nonirradiated group served as control. Three weeks after completion of the last radiotherapy session, one of the irradiated groups and the control group received titanium dental implants bilaterally in the femur head. For the second irradiated group, an osteotomy was performed, and the surgical wound was left to heal for 2 weeks before implant placement. All animals were sacrificed 4 weeks after implant placement, and histomorphometric analysis was used to study bone-implant contact (n=14, α=.05). Statistical analysis revealed significantly higher (F=159, P<.001) bone-implant contact in the 2-stage (40.2 ±1.9) implant placement technique than in the immediately placed implants (21.2 ±2.3) in irradiated bone. Both of the groups had a significantly lower bone-to-implant contact ratio than the non-irradiated control (64.2 ±3.8). Within the limitations of this animal study, the 2-stage implant placement technique could be used to reduce trauma in irradiated bone and to improve wound healing around dental implants. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Usefulness of {sup 99m}Tc-depreotide scintigraphy for the diagnosis of bone metastases in non-small cell lung cancer stage 3-4; Apport de la scintigraphie au {sup 99m}Tc-depreotide pour le diagnostic de lesions osseuses secondaires dans le cancer bronchopulmonaire non a petites cellules stade 3-4

Energy Technology Data Exchange (ETDEWEB)

Costo, S.; Dunet, V.; Agostini, D.; Bouvard, G. [CHU Cote de Nacre, Service de Medecine Nucleaire et Isotopes, 14 - Caen (France); Halley, A. [Centre Havrais d' Imagerie Nucleaire, 76 - Montivilliers (France); Bergot, E.; Porret, E.; Zalcman, G. [CHU Cote de Nacre, Service de Pneumologie, 14 - Caen (France)

2009-02-15

Objective In non-small cell lung cancer (NSCLC), metastatic bone involvement is usually assessed using conventional {sup 99m}Tc-HMDP bone scintigraphy, which has a high sensitivity but a poor specificity. The purpose of this study was to assess the usefulness of the {sup 99m}Tc-D scintigraphy for the detection of malignant bone metastases in patients with NSCLC stage III or IV and to compare these results with {sup 99m}Tc-HMDP bone scan findings. Methods Nineteen patients (13 M and 6 F, mean age 59 years) with proven NSCLC, suspected to have stage III or IV were enrolled prospectively. All patients underwent whole body {sup 99m}Tc-HMDP and {sup 99m}Tc-D scintigraphy to detect bone metastases within a mean interval of 14 days. Each focal uptake of {sup 99m}Tc-D or {sup 99m}Tc-HMDP was considered benign or malignant, leading to positive or negative diagnosis for bone involvement. The final diagnosis of bone metastases was established by a lung specialist, on the basis of additional imaging modalities and of 12 months follow-up. Results Twelve bone lesions were identified by {sup 99m}Tc-D scintigraphy, 10 were classified as bone metastases and two were classified as inflammatory bone lesions. Four patients were metastatic. Fifty eight bone lesions were detected by {sup 99m}Tc-HMDP scintigraphy, 26 of whom were considered malignant, eight patients were thus considered metastatic. Thereby, the two nuclear medicine modalities were concordant for 13 patients, that is 68% of cases and were discordant for six patients, representing 32% of cases. Diagnostic sensitivity, specificity and accuracy of depreotide scintigraphy and {sup 99m}Tc-HMDP bone scintigraphy were 75% for both, 93.3 and 73.3%, and 89.5 and 73.3% respectively. Conclusion Our data suggest that depreotide scintigraphy with the same sensitivity, a better accuracy and specificity than those of {sup 99m}Tc-HMDP bone scan can detect metastatic bone lesions in patients with NSCLC suspected to have stage III or IV

Dental Calculus Stimulates Interleukin-1β Secretion by Activating NLRP3 Inflammasome in Human and Mouse Phagocytes.

Directory of Open Access Journals (Sweden)

Jorge Luis Montenegro Raudales

Full Text Available Dental calculus is a mineralized deposit associated with periodontitis. The bacterial components contained in dental calculus can be recognized by host immune sensors, such as Toll-like receptors (TLRs, and induce transcription of proinflammatory cytokines, such as IL-1β. Studies have shown that cellular uptake of crystalline particles may trigger NLRP3 inflammasome activation, leading to the cleavage of the IL-1β precursor to its mature form. Phagocytosis of dental calculus in the periodontal pocket may therefore lead to the secretion of IL-1β, promoting inflammatory responses in periodontal tissues. However, the capacity of dental calculus to induce IL-1β secretion in human phagocytes has not been explored. To study this, we stimulated human polymorphonuclear leukocytes (PMNs and peripheral blood mononuclear cells (PBMCs with dental calculus collected from periodontitis patients, and measured IL-1β secretion by ELISA. We found that calculus induced IL-1β secretion in both human PMNs and PBMCs. Calculus also induced IL-1β in macrophages from wild-type mice, but not in macrophages from NLRP3- and ASC-deficient mice, indicating the involvement of NLRP3 and ASC. IL-1β induction was inhibited by polymyxin B, suggesting that LPS is one of the components of calculus that induces pro-IL-1β transcription. To analyze the effect of the inorganic structure, we baked calculus at 250°C for 1 h. This baked calculus failed to induce pro-IL-1β transcription. However, it did induce IL-1β secretion in lipid A-primed cells, indicating that the crystalline structure of calculus induces inflammasome activation. Furthermore, hydroxyapatite crystals, a component of dental calculus, induced IL-1β in mouse macrophages, and baked calculus induced IL-1β in lipid A-primed human PMNs and PBMCs. These results indicate that dental calculus stimulates IL-1β secretion via NLRP3 inflammasome in human and mouse phagocytes, and that the crystalline structure has a

Dental Calculus Stimulates Interleukin-1β Secretion by Activating NLRP3 Inflammasome in Human and Mouse Phagocytes.

Science.gov (United States)

Montenegro Raudales, Jorge Luis; Yoshimura, Atsutoshi; Sm, Ziauddin; Kaneko, Takashi; Ozaki, Yukio; Ukai, Takashi; Miyazaki, Toshihiro; Latz, Eicke; Hara, Yoshitaka

2016-01-01

Dental calculus is a mineralized deposit associated with periodontitis. The bacterial components contained in dental calculus can be recognized by host immune sensors, such as Toll-like receptors (TLRs), and induce transcription of proinflammatory cytokines, such as IL-1β. Studies have shown that cellular uptake of crystalline particles may trigger NLRP3 inflammasome activation, leading to the cleavage of the IL-1β precursor to its mature form. Phagocytosis of dental calculus in the periodontal pocket may therefore lead to the secretion of IL-1β, promoting inflammatory responses in periodontal tissues. However, the capacity of dental calculus to induce IL-1β secretion in human phagocytes has not been explored. To study this, we stimulated human polymorphonuclear leukocytes (PMNs) and peripheral blood mononuclear cells (PBMCs) with dental calculus collected from periodontitis patients, and measured IL-1β secretion by ELISA. We found that calculus induced IL-1β secretion in both human PMNs and PBMCs. Calculus also induced IL-1β in macrophages from wild-type mice, but not in macrophages from NLRP3- and ASC-deficient mice, indicating the involvement of NLRP3 and ASC. IL-1β induction was inhibited by polymyxin B, suggesting that LPS is one of the components of calculus that induces pro-IL-1β transcription. To analyze the effect of the inorganic structure, we baked calculus at 250°C for 1 h. This baked calculus failed to induce pro-IL-1β transcription. However, it did induce IL-1β secretion in lipid A-primed cells, indicating that the crystalline structure of calculus induces inflammasome activation. Furthermore, hydroxyapatite crystals, a component of dental calculus, induced IL-1β in mouse macrophages, and baked calculus induced IL-1β in lipid A-primed human PMNs and PBMCs. These results indicate that dental calculus stimulates IL-1β secretion via NLRP3 inflammasome in human and mouse phagocytes, and that the crystalline structure has a partial role in

Dental Calculus Stimulates Interleukin-1β Secretion by Activating NLRP3 Inflammasome in Human and Mouse Phagocytes

Science.gov (United States)

Montenegro Raudales, Jorge Luis; Yoshimura, Atsutoshi; SM, Ziauddin; Kaneko, Takashi; Ozaki, Yukio; Ukai, Takashi; Miyazaki, Toshihiro; Latz, Eicke; Hara, Yoshitaka

2016-01-01

Dental calculus is a mineralized deposit associated with periodontitis. The bacterial components contained in dental calculus can be recognized by host immune sensors, such as Toll-like receptors (TLRs), and induce transcription of proinflammatory cytokines, such as IL-1β. Studies have shown that cellular uptake of crystalline particles may trigger NLRP3 inflammasome activation, leading to the cleavage of the IL-1β precursor to its mature form. Phagocytosis of dental calculus in the periodontal pocket may therefore lead to the secretion of IL-1β, promoting inflammatory responses in periodontal tissues. However, the capacity of dental calculus to induce IL-1β secretion in human phagocytes has not been explored. To study this, we stimulated human polymorphonuclear leukocytes (PMNs) and peripheral blood mononuclear cells (PBMCs) with dental calculus collected from periodontitis patients, and measured IL-1β secretion by ELISA. We found that calculus induced IL-1β secretion in both human PMNs and PBMCs. Calculus also induced IL-1β in macrophages from wild-type mice, but not in macrophages from NLRP3- and ASC-deficient mice, indicating the involvement of NLRP3 and ASC. IL-1β induction was inhibited by polymyxin B, suggesting that LPS is one of the components of calculus that induces pro-IL-1β transcription. To analyze the effect of the inorganic structure, we baked calculus at 250°C for 1 h. This baked calculus failed to induce pro-IL-1β transcription. However, it did induce IL-1β secretion in lipid A-primed cells, indicating that the crystalline structure of calculus induces inflammasome activation. Furthermore, hydroxyapatite crystals, a component of dental calculus, induced IL-1β in mouse macrophages, and baked calculus induced IL-1β in lipid A-primed human PMNs and PBMCs. These results indicate that dental calculus stimulates IL-1β secretion via NLRP3 inflammasome in human and mouse phagocytes, and that the crystalline structure has a partial role in

Implementing peer review of teaching: a guide for dental educators.

Science.gov (United States)

Cunningham, I M; Johnson, I; Lynch, C D

2017-04-07

Peer review of teaching (PRT) is well established and valued within higher education. Increasingly, dental educators involved in undergraduate or postgraduate teaching are required to undertake PRT as part of their teaching development. Despite this, there is a paucity of literature relating to PRT within dental education, and none that considers the implementation of PRT within large dental teaching establishments. This article describes in detail a staged process for the planning and implementation of PRT within a UK dental school. It uses relevant educational literature to supplement the authors' experiences and recommendations. By highlighting aspects of the process which are key to successful implementation, it is a useful guide for all dental educator teams who wish to successfully introduce, restructure or refresh a PRT scheme.

Histo-anatomic 3D printing of dental structures.

Science.gov (United States)

Schweiger, J; Beuer, F; Stimmelmayr, M; Edelhoff, D; Magne, P; Güth, J F

2016-11-04

The creation of dental restorations with natural appearance and biomechanics represents a major challenge for the restorative team. The manufacturing-process of high-aesthetic restorations from tooth-coloured restorative materials is currently dominated by manual manufacturing procedures and the outcome is highly dependent on the knowledge and skills of the performing dental technician. On the other hand, due to the simplicity of the manufacturing process, CAD/CAM restorations from different material classes gain more and more acceptance in the daily routine. Multi-layered restorations show significant aesthetic advantages versus monolithic ones, but are difficult to fabricate using digital technologies. The key element for the successful automated digital fabrication of aesthetic anterior restorations seems to be the form of the individual dentine core as defined by dentine enamel junction (DEJ) covered by a more transparent layer of material imitating the enamel layer to create the outer enamel surface (OES). This article describes the possibilities and technologies available for so-called '4D-printing'. It introduces the digital manufacturing process of multilayered anterior teeth using 3D multipart printing, taking the example of manufacturing replicas of extracted intact natural teeth.

Factors influencing the dimensional accuracy of 3D-printed full-coverage dental restorations using stereolithography technology

NARCIS (Netherlands)

Alharbi, N.; Osman, R.B.; Wismeijer, D.

2016-01-01

Purpose: The aim of the present study was to evaluate the effect of the build angle and the support configuration (thick versus thin support) on the dimensional accuracy of 3D-printed full-coverage dental restorations. Materials and Methods: A full-coverage dental crown was digitally designed and

TNF-α Upregulates Expression of BMP-2 and BMP-3 Genes in the Rat Dental Follicle – Implications for Tooth Eruption

Science.gov (United States)

Yao, Shaomian; Prpic, Veronica; Pan, Fenghui; Wise, Gary E.

2011-01-01

The dental follicle appears to regulate both the alveolar bone resorption and bone formation needed for tooth eruption. Tumor necrosis factor-alpha ( TNF-α) gene expression is maximally upregulated at postnatal day 9 in the rat dental follicle of the 1st mandibular molar, a time that correlates with rapid bone growth at the base of the tooth crypt, as well as a minor burst of osteoclastogenesis. TNF-α expression is correlated with the expression of bone morphogenetic protein-2 (BMP-2), a molecule expressed in the dental follicle that can promote bone formation. Because BMP-2 signaling may be augmented by bone morphogenetic protein-3 (BMP-3), it was the objective of this study to determine 1) if the dental follicle expresses BMP-3 and 2) if TNF-α stimulates the dental follicle cells to express BMP-2 and BMP-3. Dental follicles were collected from different postnatal ages of rat pups. Dental follicle cells were incubated with TNF-α to study its dosage and time-course effects on gene expression of BMP-2 and BMP-3, as determined by real-time RT-PCR. Next, immunostaining was conducted to confirm if the protein was synthesized and ELISA of the conditioned medium was conducted to determine if BMP-2 was secreted. We found that BMP-3 expression is correlated with the expression of TNF-α in the dental follicle and TNF-α significantly increased BMP-2 and BMP-3 expression in vitro. Immunostaining and ELISA showed that BMP-2 and BMP-3 were synthesized and secreted. This study suggests that TNF-α can upregulate the expression of bone formation genes that may be needed for tooth eruption. PMID:20067418

Tc-99m-methylene-diphosphonate mammo- and bone- scintigraphy in preoperative staging of breast carcinoma

International Nuclear Information System (INIS)

Piperkova, E.; Gavrilov, I.; Garanina, Z.; Alexandrova, E.; Dimitrova, M.; Katerinski, K.

2003-01-01

Objective: The study is aimed to assess the potentialities of 99m Tc-MDP for visualization of the breast cancer during the routine preoperative bone scintigraphy in high-risk women. Material and methods: The scintimammography with 99m Tc-MDP has been carried out in 82 women, age between 30 and 74, during the preoperative bone scintigraphy, 62 of them before surgery or neoadjuvant chemotherapy for the breast cancer, an 12 - with hyperdense or undergone an operation of the mammary gland and suspected for breast cancer on the base of the mammography and/or ultrasonography. All results have been verified histologically. The scintimammography has been performed from 5 to 15 minutes after the i.v. injection of 740 MBq 99m Tc-MDP. Results: The build up of 99m Tc-MDP in the breast parenchyma has being changed in the course of time. On the early images 71 verified tumor lesions have been visualized with a hyper fixation of 99m Tc-MDP in the breast and non-homogenous buildup above the background in fibrocystic processes. In 12 patients, hyper fixated regional lymph nodes have been visualized, which have been verified later as metastases N1-2. Cancer has been verified in 3 patient suspected for breast cancer and hyper fixation of 99m Tc-MDP. All verified lesions are G2-3 with an active neoangiogenesis. In 7 women with fibrocystic mastopathy, the 99m Tc-MDP hyper fixation remains at the late stages at different decreasing rate. The neoplastic lesions show faster 'washout'. Conclusions: The 99m Tc-MDP scintigraphy allows to localize successfully primary and regional lesions in the breast and lymph nodes with high sensitivity (97%) and PPV up to 100%. It is economically justified to expand the bone scintigraphy with 99m Tc-MDP by an early scanning for the complete breast cancer staging

Predictors of dental rehabilitation in children aged 3?12 years

OpenAIRE

Gopinath, Vellore Kannan; Awad, Manal A.

2015-01-01

Objectives: The aim of this study was to evaluate the proportion of completed treatments and to study the factors affecting the full mouth dental rehabilitation in pediatric patients treated by undergraduate students at the College of Dental Medicine Teaching Clinics, University of Sharjah. Materials and Methods: A retrospective study was conducted on 270 children aged less than 12 years (mean age 7.6, SD 2.04). Comprehensive dental rehabilitation reports of child patients that were completed...

Longitudinal behavioral analysis during dental care of children aged 0 to 3 years

Directory of Open Access Journals (Sweden)

Robson Frederico Cunha

2009-09-01

Full Text Available "When" and "how" the dentist intervenes have repercussions on children's physical and emotional patterns. The objective of the present study was to conduct a longitudinal behavioral analysis during dental care of babies aged 0 to 3 years. A total of 216 patients seen at the Baby Clinic of the School of Dentistry at Araçatuba, São Paulo State University (UNESP, were selected. The selection criterion was attendance at ten dental care sessions at bimonthly intervals for routine procedures such as clinical examination and oral hygiene. There was a predominance of cooperative behavior compared to uncooperative behavior when each visit was analyzed separately. The behavior of the patients must have been directly influenced by their psychomotor development. Constant attendance and exposure of the baby to non-stressful dental stimuli are factors that favor a cooperative behavior.

99mTc-EDDA/HYNIC-Tyr(3)-octreotide for staging and follow-up of patients with neuroendocrine gastro-entero-pancreatic tumors.

Science.gov (United States)

Gabriel, M; Muehllechner, P; Decristoforo, C; von Guggenberg, E; Kendler, D; Prommegger, R; Profanter, C; Moncayo, R; Virgolini, I

2005-09-01

To evaluate the use of 99mTc-EDDA-hydrazinonicotinyl-Tyr3-octreotide (Tc-TOC) for staging and follow-up of neuroendocrine gastro-entero-pancreatic (GEP) tumors with special focus on the acquisition protocol including single photon emission computed tomography (SPECT). Eighty-eight patients (37 female, 51 male; age range: 16 to 81 years; mean age: 56.3 years) were studied: 42 patients for staging after initial histological confirmation and 46 patients during post-therapy follow-up. An average activity of 400 MBq of the radiopharmaceutical was injected. All tumors originated from neuroendocrine tissue of the gastroenteropancreatic tract. Whole body scintigrams at 4 h postinjection and SPECT of the abdomen were obtained in all patients. Additional planar images of the abdomen were acquired at 2 h after injection in 68 patients. The Tc-TOC scan result was true-positive in 56 patients, true-negative in 17, false-negative in 14, and false-positive in 1 patient. The false-positive finding was caused by a colonic adenoma. Overall, a scan sensitivity of 80% (56/70 patients), specificity of 94.4% (17/18 patients) and accuracy of 82.9% (73/88 patients) were calculated on patient basis. In total, Tc-TOC detected 357 foci in 69 patients. In 7 patients equivocal findings were observed in the bowel at 4 h postinjection without corresponding tracer uptake in the scan 2 h earlier, meaning that these abnormal findings were correctly classified as non-malignant. In addition to planar views, SPECT revealed further 62 lesions. Tc-TOC with one-day, dual-time acquisition protocol is an accurate staging procedure in patients with neuroendocrine GEP tumors. SPECT shows high sensitivity for detection of abdominal lesions, while earlier images improve the reliability of abnormal abdominal findings.

Key Markers of mTORC1-Dependent and mTORC1-Independent Signaling Pathways Regulating Protein Synthesis in Rat Soleus Muscle During Early Stages of Hindlimb Unloading.

Science.gov (United States)

Mirzoev, Timur; Tyganov, Sergey; Vilchinskaya, Natalia; Lomonosova, Yulia; Shenkman, Boris

2016-01-01

The purpose of the study was to assess the amount of rRNA and phosphorylation status of the key markers of mTORC1-dependent (70s6k, 4E-BP1) and mTORC1-independent (GSK-3β, AMPK) signaling pathways controlling protein synthesis in rat soleus during early stages of mechanical unloading (hindlimb suspension (HS) for 1-, 3- and 7 days). The content of the key signaling molecules of various anabolic signaling pathways was determined by Western-blotting. The amount of 28S rRNA was evaluated by RT-PCR. The rate of protein synthesis was assessed using in-vivo SUnSET technique. HS for 3 and 7 days induced a significant (pprotein synthesis in soleus muscle in comparison with control. HS within 24 hours resulted in a significant (pprotein synthesis in rat soleus during early stages of simulated microgravity is associated with impaired ribosome biogenesis as well as reduced activity of mTORC1-independent signaling pathways. © 2016 The Author(s) Published by S. Karger AG, Basel.

IMRT delivers lower radiation doses to dental structures than 3DRT in head and neck cancer patients.

Science.gov (United States)

Fregnani, Eduardo Rodrigues; Parahyba, Cláudia Joffily; Morais-Faria, Karina; Fonseca, Felipe Paiva; Ramos, Pedro Augusto Mendes; de Moraes, Fábio Yone; da Conceição Vasconcelos, Karina Gondim Moutinho; Menegussi, Gisela; Santos-Silva, Alan Roger; Brandão, Thais B

2016-09-07

Radiotherapy (RT) is frequently used in the treatment of head and neck cancer, but different side-effects are frequently reported, including a higher frequency of radiation-related caries, what may be consequence of direct radiation to dental tissue. The intensity-modulated radiotherapy (IMRT) was developed to improve tumor control and decrease patient's morbidity by delivering radiation beams only to tumor shapes and sparing normal tissue. However, teeth are usually not included in IMRT plannings and the real efficacy of IMRT in the dental context has not been addressed. Therefore, the aim of this study is to assess whether IMRT delivers lower radiation doses to dental structures than conformal 3D radiotherapy (3DRT). Radiation dose delivery to dental structures of 80 patients treated for head and neck cancers (oral cavity, tongue, nasopharynx and oropharynx) with IMRT (40 patients) and 3DRT (40 patients) were assessed by individually contouring tooth crowns on patients' treatment plans. Clinicopathological data were retrieved from patients' medical files. The average dose of radiation to teeth delivered by IMRT was significantly lower than with 3DRT (p = 0.007); however, only patients affected by nasopharynx and oral cavity cancers demonstrated significantly lower doses with IMRT (p = 0.012 and p = 0.011, respectively). Molars received more radiation with both 3DRT and IMRT, but the latter delivered significantly lower radiation in this group of teeth (p dental groups. Maxillary teeth received lower doses than mandibular teeth, but only IMRT delivered significantly lower doses (p = 0.011 and p = 0.003). Ipsilateral teeth received higher doses than contralateral teeth with both techniques and IMRT delivered significantly lower radiation than 3DRT for contralateral dental structures (p radiation doses to teeth than 3DRT, but only for some groups of patients and teeth, suggesting that this decrease was more likely due to the protection of

Doses to patients from dental radiology in France

International Nuclear Information System (INIS)

Benedittini, M.; Maccia, C.; Lefaure, C.; Fagnani, F.

1989-01-01

In France, a national study was undertaken to estimate both dental radiology practices (equipment and activity) and the associated population collective dose. This study was done in two steps: A nationwide survey was conducted on the practitioner categories involved in dental radiology, and dosimetric measurements were performed on patients and on an anthropomorphic phantom by using conventional dental x-ray machines and pantomographic units. A total of 27.5 x 10(6) films were estimated to have been performed in 1984; 6% of them were pantomographic and 94% were conventional. Most of the organ doses measured for one intra-oral film were lower than 1 mGy (100 mrad); pantomogram dose values were generally higher than intra-oral ones. The collective effective dose equivalent figure was 2,000 person-Sv (2 x 10(5) person rem) leading to a per head dose equivalent of 0.037 mSv (3.7 mrem). The study allowed authors to identify ways to reduce the patient dose in France (e.g., implementing the use of long cone devices and controlling darkroom practices)

Full 3-dimensional digital workflow for multicomponent dental appliances A proof of concept

NARCIS (Netherlands)

Meer, van der Joerd; Vissink, Arjan; Ren, Yijin

Background. The authors used a 3-dimensional (3D) printer and a bending robot to produce a multicomponent dental appliance to assess whether 3D digital models of the dentition are applicable for a full digital workflow. Methods. The authors scanned a volunteer's dentition with an intraoral scanner

Clinical use of dental classification.

Science.gov (United States)

Jones, Gordon

2008-01-01

The Dental Classification system used by the uniformed services is supposed to predict the incidence of dental emergencies in the operational setting, at least on the unit level. Since most Sailors and Marines are deployed without close dental support, the sea services have adopted a policy of early treatment of class 3 dental conditions during recruit training. The other services are beginning to do the same. Recently, two factors have emerged that are affecting this early dental class 3 treatment. These factors must be considered when planning to provide early dental treatment. First, changing population and dentist provider demographics in the civilian sector are beginning to affect the class 3 treatment needs of incoming military recruits. Second, attrition from recruit training results in treatment provided to recruits who leave military service before finishing their training. Some view this as a waste of resources, others as a cost of doing business. As operational jointness increases, the three services must develop and use a single dental classification terminology, as well as unified standards and guidelines, both for better research in this area and for the readiness and well-being of our patients.

Dental-CT: image quality and absorbed radiation dose of different scan protocols

International Nuclear Information System (INIS)

Schorn, C.; Alamo, L.; Funke, M.; Grabbe, E.; Visser, H.; Hermann, K.P.

1999-01-01

Purpose: To develop a scan protocol for dental-CT which guarantees good image quality at the lowest possible radiation dose. Methods: In an experimental investigation Dental-CT (HSA, GE, Milwaukee, USA) of the mandible of two human skeletons positioned in a water tank were performed in order to define the most advantageous scan protocol. Tube currents ranged from 40 to 200 mA and the scan technique was modified (axial mode or helical mode with pitches of 1 to 3 and corresponding increments of 0.4 to 1.0 mm). 39 patients underwent a dental-CT with decreased current (80 mA) in the helical scan mode (pitch 2, slice thickness 1 mm). Dose measurements were performed for two different scan protocols (A: axial, 130 mAs, B: helical, 80 mA, pitch 2). Results: The preliminary investigations of image quality showed only a minor effect of the applied current. For the helical scan mode, pitches of more than 2 impaired image quality. A low increment had no advantages. There were no disadvantages in clinical practice using protocol B with decreased tube current. Absorbed radiation dose of dental CT performed with protocol B was decreased to one third in comparison to protocol A. Conclusions: A scan protocol with a low tube current (e.g., 80 mA, for a rotation time of 1 s) and a helical scan mode (e.g., for a slice thickness of 1 mm with a pitch of 2 and an increment of 1 mm) is recommended for performing dental-CT. (orig.) [de

Effects of boron on experimental dental caries activity

Energy Technology Data Exchange (ETDEWEB)

Liu, F.T.Y.; Lin, H.S.

1974-01-01

Drinking water supplemented with 1, 10, 30, 50, 100 or 283 ppM of boron or 10 or 25 ppM of fluoride individually or in combination was supplied to weanling rats which were fed a cariogenic diet. Results showed that B did not exert a cariostatic effect nor did it synergize the F in reducing dental caries activity. 11 references, 4 figures, 3 tables.

Is obesity associated to dental caries in Brazilian schoolchildren?

Science.gov (United States)

Fernández, María Raquel; Goettems, Marília Leão; Demarco, Flávio Fernando; Corrêa, Marcos Britto

2017-11-06

This cross-sectional study aimed to determine the association between dental caries and weight status, and between dental caries and physical activity in Brazilian schoolchildren aged 8 to 12 years. A multi-stage sample of children enrolled in 20 private and public schools in 2010 in Pelotas, Southern Brazil, were invited to participate in the study. Socioeconomic data were collected from parents, and data regarding children characteristics were collected from children using a questionnaire and anthropometric measures. The Body Mass Index was obtained, and children were classified as overweight/obese considering age and sex. Dental examinations were performed to assess the presence of gingival inflammation, dental caries prevalence (DMFT≥1) and dental caries experience (mean DMFT). Multivariate Poisson Regression was used to assess factors associated with dental caries prevalence and experience. A total of 1,210 children were included in the study. Dental caries prevalence was 32.4% (95% CI 29.7-35.2), while the mean DMFT was 0.64 (± SD 1.00). Children who practiced less than 300 minutes per week of physical activity and overweigh/obese children had lower prevalence of dental caries, while children with obesity or overweight presented lower dental caries experience. Obesity/overweight and physical activity level presented an inverse relationship with dental caries. Longitudinal studies investigating the complexity of this relationship are required.

Sultanate of Oman: building a dental workforce.

Science.gov (United States)

Gallagher, Jennifer E; Manickam, Sivakumar; Wilson, Nairn H F

2015-06-22

A medium- and long-term perspective is required in human resource development to ensure that future needs and demands for oral healthcare are met by the most appropriate health professionals. This paper presents a case study of the Sultanate of Oman, one of the Gulf States with a current population of 3.8 million, which has initiated dental training through the creation of a dental college. The objectives of this paper are first to describe trends in the dental workforce in Oman from 1990 to date and compare the dental workforce with its medical counterparts in Oman and with other countries, and second, to consider future dental workforce in the Sultanate. Data were collected from published sources, including the Ministry of Health (MoH), Ministry of Manpower (MoM), and Ministry of National Economy (MoNE)-Sultanate of Oman; the World Health Organization (WHO); World Bank; and the Central Intelligence Agency (CIA). Dentist-to-population ratios were compared nationally, regionally and globally for medicine and dentistry. Dental graduate outputs were mapped onto the local supply. Future trends were examined using population growth predictions, exploring the expected impact in relation to global, regional and European workforce densities. Population growth in Oman is increasing at a rate of over 2% per year. Oman has historically been dependent upon an expatriate dental workforce with only 24% of the dentist workforce Omani in 2010 (n = 160). Subsequent to Oman Dental College (ODC) starting to qualify dental (BDS) graduates in 2012, there is an increase in the annual growth of the dentist workforce. On the assumption that all future dental graduates from ODC have an opportunity to practise in Oman, ODC graduates will boost the annual Omani dentist growth rate starting at 28% per annum from 2012 onwards, building capacity towards global (n = 1711) and regional levels (Gulf State: n = 2167) in the medium term. The output of dental graduates from Oman Dental College is

Porcine Dental Epithelial Cells Differentiated in a Cell Sheet Constructed by Magnetic Nanotechnology

Directory of Open Access Journals (Sweden)

Wataru Koto

2017-10-01

Full Text Available Magnetic nanoparticles (MNPs are widely used in medical examinations, treatments, and basic research, including magnetic resonance imaging, drug delivery systems, and tissue engineering. In this study, MNPs with magnetic force were applied to tissue engineering for dental enamel regeneration. The internalization of MNPs into the odontogenic cells was observed by transmission electron microscopy. A combined cell sheet consisting of dental epithelial cells (DECs and dental mesenchymal cells (DMCs (CC sheet was constructed using magnetic force-based tissue engineering technology. The result of the iron staining indicated that MNPs were distributed ubiquitously over the CC sheet. mRNA expression of enamel differentiation and basement membrane markers was examined in the CC sheet. Immunostaining showed Collagen IV expression at the border region between DEC and DMC layers in the CC sheet. These results revealed that epithelial–mesenchymal interactions between DEC and DMC layers were caused by bringing DECs close to DMCs mechanically by magnetic force. Our study suggests that the microenvironment in the CC sheet might be similar to that during the developmental stage of a tooth bud. In conclusion, a CC sheet employing MNPs could be developed as a novel and unique graft for artificially regenerating dental enamel.

Social capital and dental pain in Brazilian northeast: a multilevel cross-sectional study

Directory of Open Access Journals (Sweden)

Santiago Bianca Marques

2013-01-01

Full Text Available Abstract Background There is limited evidence on possible associations between social determinants and dental pain. This study investigated the relationship of neighborhood and individual social capital with dental pain in adolescents, adults and the elderly. Methods A population-based multilevel study was conducted involving 624 subjects from 3 age groups: 15–19, 35–44 and 65–74 years. They were randomly selected from 30 census tracts in three cities in the State of Paraíba, Brazil. A two-stage cluster sampling was used considering census tracts and households as sampling units. The outcome of study was the presence of dental pain in the last 6 months. Information on dental pain, demographic, socio-economic, health-related behaviors, use of dental services, self-perceived oral health and social capital measures was collected through interviews. Participants underwent a clinical examination for assessment of dental caries. Neighborhood social capital was evaluated using aggregated measures of social trust, social control, empowerment, political efficacy and neighborhood safety. Individual social capital assessment included bonding and bridging social capital. Multilevel logistic regression was used to test the relationship of neighborhood and individual social capital with dental pain after sequential adjustment for covariates. Results Individuals living in neighborhoods with high social capital were 52% less likely to report dental pain than those living in neighborhoods with low social capital (OR = 0.48, 95% CI = 0.27-0.85. Bonding social capital (positive interaction was independently associated with dental pain (OR = 0.88, 95% CI = 0.80-0.91. Last dental visit, self-perceived oral health and number of decayed teeth were also significantly associated with dental pain. Conclusions Our findings suggest that contextual and individual social capital are independently associated with dental pain.

Perception of dental fluorosis amongst Ethiopian children and their mothers.

Science.gov (United States)

Wondwossen, Fantaye; Astrøm, Anne Nordrehaug; Bårdsen, Asgeir; Bjorvatn, Kjell

2003-04-01

This study was conducted in three Ethiopian Rift Valley villages known for endemic fluorosis. Three-hundred-and-six adolescents (12-15 years) and 233 mothers participated. The aim was to study dental fluorosis in the youngsters and to assess the extent of agreement between clinical and self-rated discoloration and pitting of teeth, and also the level at which dental fluorosis is perceived as a problem both by children and their mothers. The children (154 M and 152 F) gave a simple self-assessment of tooth-color and quality of their teeth, and were subsequently examined for dental fluorosis. Finally, four color photographs of teeth with dental fluorosis (TF-scores 2, 3, 5, and 7) were used as references during a structured oral interview of the children, as well as their mothers. At TF score > or = 2, the prevalence of dental fluorosis on maxillary central incisors was 72% and 37% at TF score > or = 4. The mean TF score was significantly higher among boys than among girls of unemployed fathers compared to children of employed fathers. The likelihood of reporting problems with dental appearance increased with increasing individual TF scores. The child/mother pairs found teeth with TF scores 2 and 3 esthetically acceptable, while teeth with TF scores 5 and 7 were considered unacceptable. Mothers were more critical of severe fluorosis than were their children.

Dental Calculus Arrest of Dental Caries

OpenAIRE

Keyes, Paul H.; Rams, Thomas E.

2016-01-01

Background An inverse relationship between dental calculus mineralization and dental caries demineralization on teeth has been noted in some studies. Dental calculus may even form superficial layers over existing dental caries and arrest their progression, but this phenomenon has been only rarely documented and infrequently considered in the field of Cariology. To further assess the occurrence of dental calculus arrest of dental caries, this study evaluated a large number of extracted human t...

Dental Practice, Human Immunodeficiency Virus Transmission and ...

African Journals Online (AJOL)

by blood and blood products essentially occur through the use ... occupational risks and questions on the attitudes of the ... No response. 6 ... Figure 3: Dental professionals have a lower risk of being infected with .... Greeff M, Phetlhu R. The meaning and effect of HIV/AIDS .... For the purpose of printing, always retain a good.

Sellado de lesiones de caries dental no cavitadas: ensayo clínico aleatorio controlado

Directory of Open Access Journals (Sweden)

Jesús Alberto-Luengo-Fereira

2013-07-01

Full Text Available Objetivo: Evaluar la efectividad del sellado de lesiones de caries dental no cavitadas. Materiales y Métodos: Se realizó un ensayo clínico, aleatorio, doble ciego, controlado y diseño de boca dividida. Fueron seleccionados 262 primeros molares permanentes, en 74 niños con edad media de 7,47±0.8 años. Cada paciente tenía mínimo un par de primeros molares permanentes con lesiones bilaterales de caries dental códigos 1, 2 o 3 del Sistema Internacional de Detección y Valoración de Caries Dental. Se asignaron aleatoriamente a tres tipos de tratamiento, 1: vidrio ionomérico (3M ESPE Ketac Molar Easymix®, 2: Sellante resinoso (3M ESPE Climpro®, 3: vidrio ionomérico modificado con resina (3M ESPE Ketac® N100. La retención y progresión de caries dental fueron evaluadas. Los datos se procesaron con el programa SPSS V15. Se utilizaron las pruebas Chi Cuadrado y Test de Fisher. Resultados: La tasa retención total de los tratamientos 1, 2 y 3 fue respectivamente: 51,7%, 43,4% y 26,4%; no obstante estas diferencias no fueron significativas. La incidencia de caries en los molares no sellados fue 31,8% y en los molares sellados con perdida completa del material 28,5%. No se encontraron diferencias significativas en la progresión de las lesiones entre molares que reciben y los que no reciben tratamiento. Conclusiones: En este estudio, no se encontraron evidencias de diferencias en la retención y en la progresión de las lesiones selladas y no selladas, entre el vidrio ionomérico convencional de alta densidad, el sellante a base de resina y un vidrio ionomérico modificado con resina.

A 3 GHz transimpedance OEIC receiver for 1.3-1.55 μm fiber-optic systems

International Nuclear Information System (INIS)

Chang, G.K.; Hong, W.P.; Gimlett, J.L.; Bhat, R.; Nguyen, C.K.; Sasaki, G.; Young, J.C.

1990-01-01

This paper reports a high-performance, MSM-HEMT transimpedance photoreceiver fabricated using OMCVD grown InAlAs/InGaAs heterostructures on an InP substrate. This is the first demonstration of a monolithically integrated receiver amplifier that incorporates a cascode amplifier stage and a Schottky diode level-shifting stage implemented on InP-based OEIC photoreceivers. The transimpedance amplifier has an open loop gain of 5.7 and a bandwidth of 3.0 GHz which represent the highest gain and the highest speed performance reported for 1.3--1.55 μm wavelength OEIC receivers

77 FR 4469 - Dental Conditions

Science.gov (United States)

2012-01-30

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 3 RIN 2900-AN28 Dental Conditions AGENCY: Department of... rule the proposal to amend its adjudication regulations regarding service connection of dental... Veterans Benefits Administration (VBA) for service connection of dental conditions for the purpose of...

76 FR 14600 - Dental Conditions

Science.gov (United States)

2011-03-17

... qualify for VHA dental treatment, including any claim for treatment of periodontal disease or calculus... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 3 RIN 2900-AN28 Dental Conditions AGENCY: Department of... its adjudication regulations regarding service connection of dental conditions for treatment purposes...

Dental magnetic resonance tomography (dental-MRT) as a method for imaging of the maxillo-mandibular bone; Dentale Magnetresonanztomographie (Dental-MRT) als Verfahren zur Darstellung des maxillomandibulaeren Zahnhalteapparates

Energy Technology Data Exchange (ETDEWEB)

Gahleitner, A.; Nasel, C.; Schick, S.; Dorffner, S.; Imhof, H.; Trattnig, S. [Wien Univ. (Austria). Abt. fuer Osteologie; Bernhart, T.; Mailath, G.; Watzek, G. [Wien Univ. (Austria). Abt. fuer Orale Chirurgie

1998-10-01

Purpose: To establish a new method for dental imaging using magnetic resonance tomography named Dental-MRT and to demonstrate its usefulness in diagnosing dentogen pathologies of the mandible and maxilla. Methods: Seven healthy volunteers, three patients with pulpitis, two patients with dentigerous cysts, two patients after tooth transplantation, and three patients with atrophic mandibles have been evaluated. Optimized axial T{sub 1}- and T{sub 2}-weighted gradient echo and spin echo sequences in 2D and 3D technique have been established to perform studies of the jaws. The acquired images were reconstructed with a standard dental software package on a workstation as panorama and cross-sectional views of the mandible or maxilla. Results: The entire maxillo-mandibular bone, teeth, dental pulp, and the content of the mandibular canal were well depicted. Patients with pulpitis demonstrate bone marrow edema in the periapical region. Dentigerous cysts and their relation to the surrounding structures are clearly shown. After contrast media administration marked enhancement of the dental pulp can be demonstrated. Conclusion: Dental-MRT promises to provide a new tool for visualization and detection of dental diseases. (orig.) [Deutsch] Ziel: Das Vorstellen der Dental-MRT als neue Methode zur Darstellung des Ober- und Unterkiefers und ihre Anwendung bei der Diagnose zahnmedizinischer Erkankungen. Methoden: 7 gesunde Probanden, drei Patienten mit Pulpitis, zwei Patienten mit odontogenen Zysten, zwei Patienten nach Zahntransplantationen und drei Patienten mit atrophem Unterkiefer wurden untersucht. Optimierte axiale T{sub 1}- und T{sub 2}-gewichtete Gradienten-Echo- und Spin-Echo-Sequenzen in 2D und 3D-Technik wurden angewandt. Nach der Untersuchung wurden Panoramaschnitte und dentale Rekonstruktionen des Ober- und Unterkiefers, unter Verwendung einer gebraeuchlichen Dental-Software, angefertigt. Ergebnisse: Der gesamte Kieferbereich, Zaehne, Pulpa und der Inhalt des

Correlation between Dental Maturity by Demirjian Method and Skeletal Maturity by Cervical Vertebral Maturity Method using Panoramic Radiograph and Lateral Cephalogram

Directory of Open Access Journals (Sweden)

Madhusudhanan Mallika Mini

2017-01-01

Full Text Available Introduction: Radiographs are effective tools in assessing the stages of bone maturation in dentistry. The cervical vertebral maturation method is a proven effective tool in assessing the adolescent growth spurt than hand-wrist radiographs in an individual. Assessment of dental calcification stages are a reliable method for determining dental maturity. Panoramic imaging can be used as the primary imaging modality for assessing maturity if a correlation can be found out between tooth calcification stages and cervical vertebral maturation stages. This study was conducted to determine the correlation between dental maturity stage and cervical vertebral maturity stage and to estimate predictor variables for cervical vertebral maturation stages (CVMS stratified by gender in a tertiary hospital setting. Materials and Methods: A descriptive study was conducted among patients accessing orthodontic care in radiology outpatient clinic, Oral Medicine and Radiology department, Government Dental College Thiruvananthapuram for a period of 15 months. Participants were selected between the ages of 8 and 16 years. Panoramic radiographs and lateral cephalograms were used to determine dental maturity stages using Demirjian method and CVMS using Bacetti and Franchi method, respectively. Results: One hundred patients (males = 46, females = 54 were included in the study; the spearman rank order correlation revealed significant relationship. The correlation ranged from 0.61 to 0.74 for females and 0.48 to 0.51 for males. Second premolar showed highest correlation and canine the lowest for both females and males. Stage G of mandibular second premolar signifies the pubertal growth period in this study population. By ordinal regression model, G stage of second premolar was found to be a significant predictor in males and stage H followed by G and F in females for the age group of 12–14 years. Conclusion: Dental maturation stages were significantly correlated with CVMS

IMRT delivers lower radiation doses to dental structures than 3DRT in head and neck cancer patients

International Nuclear Information System (INIS)

Fregnani, Eduardo Rodrigues; Parahyba, Cláudia Joffily; Morais-Faria, Karina; Fonseca, Felipe Paiva; Ramos, Pedro Augusto Mendes; Moraes, Fábio Yone de; Conceição Vasconcelos, Karina Gondim Moutinho da; Menegussi, Gisela; Santos-Silva, Alan Roger; Brandão, Thais B.

2016-01-01

Radiotherapy (RT) is frequently used in the treatment of head and neck cancer, but different side-effects are frequently reported, including a higher frequency of radiation-related caries, what may be consequence of direct radiation to dental tissue. The intensity-modulated radiotherapy (IMRT) was developed to improve tumor control and decrease patient’s morbidity by delivering radiation beams only to tumor shapes and sparing normal tissue. However, teeth are usually not included in IMRT plannings and the real efficacy of IMRT in the dental context has not been addressed. Therefore, the aim of this study is to assess whether IMRT delivers lower radiation doses to dental structures than conformal 3D radiotherapy (3DRT). Radiation dose delivery to dental structures of 80 patients treated for head and neck cancers (oral cavity, tongue, nasopharynx and oropharynx) with IMRT (40 patients) and 3DRT (40 patients) were assessed by individually contouring tooth crowns on patients’ treatment plans. Clinicopathological data were retrieved from patients’ medical files. The average dose of radiation to teeth delivered by IMRT was significantly lower than with 3DRT (p = 0.007); however, only patients affected by nasopharynx and oral cavity cancers demonstrated significantly lower doses with IMRT (p = 0.012 and p = 0.011, respectively). Molars received more radiation with both 3DRT and IMRT, but the latter delivered significantly lower radiation in this group of teeth (p < 0.001), whereas no significant difference was found for the other dental groups. Maxillary teeth received lower doses than mandibular teeth, but only IMRT delivered significantly lower doses (p = 0.011 and p = 0.003). Ipsilateral teeth received higher doses than contralateral teeth with both techniques and IMRT delivered significantly lower radiation than 3DRT for contralateral dental structures (p < 0.001). IMRT delivered lower radiation doses to teeth than 3DRT, but only for some groups of patients and

Optimization of treatment of children with 3 stage Hodgkin's disease

International Nuclear Information System (INIS)

Kobikov, S.Kh.

1989-01-01

147 children younger than 15 years suffering from the 3rd stage of Hodgkins children is performed using gamma therapeutic Rocus type devices and betatron (B5M-25) and linear accelerator (LUEh-25) of 15-27.5 MeV energy electrons. Immediate and delayed treatment results are evaluated. Unfavourable clinical factors effecting the recurrence frequency are revealed. Inconsistence of supporting chemotherapy in the reduction of the number of recurrents is confirmed

Two-stage implant systems.

Science.gov (United States)

Fritz, M E

1999-06-01

Since the advent of osseointegration approximately 20 years ago, there has been a great deal of scientific data developed on two-stage integrated implant systems. Although these implants were originally designed primarily for fixed prostheses in the mandibular arch, they have been used in partially dentate patients, in patients needing overdentures, and in single-tooth restorations. In addition, this implant system has been placed in extraction sites, in bone-grafted areas, and in maxillary sinus elevations. Often, the documentation of these procedures has lagged. In addition, most of the reports use survival criteria to describe results, often providing overly optimistic data. It can be said that the literature describes a true adhesion of the epithelium to the implant similar to adhesion to teeth, that two-stage implants appear to have direct contact somewhere between 50% and 70% of the implant surface, that the microbial flora of the two-stage implant system closely resembles that of the natural tooth, and that the microbiology of periodontitis appears to be closely related to peri-implantitis. In evaluations of the data from implant placement in all of the above-noted situations by means of meta-analysis, it appears that there is a strong case that two-stage dental implants are successful, usually showing a confidence interval of over 90%. It also appears that the mandibular implants are more successful than maxillary implants. Studies also show that overdenture therapy is valid, and that single-tooth implants and implants placed in partially dentate mouths have a success rate that is quite good, although not quite as high as in the fully edentulous dentition. It would also appear that the potential causes of failure in the two-stage dental implant systems are peri-implantitis, placement of implants in poor-quality bone, and improper loading of implants. There are now data addressing modifications of the implant surface to alter the percentage of

The impact of glucocorticosteroids administered for systemic diseases on the osseointegration and survival of dental implants placed without bone grafting-A retrospective study in 31 patients.

Science.gov (United States)

Petsinis, Vassilis; Kamperos, Georgios; Alexandridi, Foteini; Alexandridis, Konstantinos

2017-08-01

To evaluate the impact of glucocorticosteroids, administered for the treatment of systemic diseases, on the osseointegration and survival of dental implants placed without bone grafting. A retrospective study was conducted in search of patients treated with dental implants while receiving glucocorticosteroid therapy for various systemic diseases. In these cases, a conventional two-stage surgical protocol was used, without bone regeneration procedures. The osseointegration was clinically and radiographically tested at the uncovering of the implants. The follow-up after loading was set at a minimum of 3 years. A total of 31 patients were included in the study. Of the 105 dental implants placed, 104 were osseointegrated (99%). No bone absorption was radiographically noted at the uncovering of the osseointegrated implants. All of the osseointegrated implants were successfully loaded for the prosthetic restoration. The mean follow-up period after loading was 71 months, with an implant survival rate of 99%. Glucocorticosteroid intake for systemic diseases does not have a significant impact on the osseointegration and the 3-year survival of dental implants placed with a conventional two-stage surgical protocol and without bone grafting. Therefore, it should not be considered a contraindication for dental implant placement. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Association between Childhood Dental Experiences and Dental Fear among Dental, Psychology and Mathematics Undergraduates in Brazil

Directory of Open Access Journals (Sweden)

Júnia M. Serra-Negra

2012-12-01

Full Text Available The aim of the present study was to evaluate the association between childhood dental experiences and dental fear in adulthood among dentistry, psychology and mathematics undergraduate students. A cross-sectional study of 1,256 students from the city of Belo Horizonte, Brazil, was performed. Students responded to the Brazilian version of the Dental Fear Survey (DFS and a questionnaire regarding previous dental experiences. Both the DFS and the questionnaire were self-administered. Association was tested using descriptive, bivariate and multivariate linear regression analysis, with a 5% significance level. Dentistry undergraduates reported lower scores than psychology (p < 0.001 and mathematics undergraduates (p < 0.05 for all three dimensions of the DFS. Negative dental experiences in childhood was associated with dimensions of Avoidance (B = 2.70, p < 0.001, Physiological arousal (B = 1.42, p < 0.001 and Fears of specific stimuli/situations (B = 3.44, p < 0.001. The reason for first visit to dentist was associated with dimensions of Physiological arousal (B = 0.76, p < 0.01 and Fears of specific stimuli/situations (B = 1.29, p < 0.01. Dentists should be encouraged to evaluate the dental fear of their patients before treatment. The DFS has been found to be an effective instrument for this purpose.

Dental wear, wear rate, and dental disease in the African apes.

Science.gov (United States)

Elgart, Alison A

2010-06-01

The African apes possess thinner enamel than do other hominoids, and a certain amount of dentin exposure may be advantageous in the processing of tough diets eaten by Gorilla. Dental wear (attrition plus abrasion) that erodes the enamel exposes the underlying dentin and creates additional cutting edges at the dentin-enamel junction. Hypothetically, efficiency of food processing increases with junction formation until an optimal amount is reached, but excessive wear hinders efficient food processing and may lead to sickness, reduced fecundity, and death. Occlusal surfaces of molars and incisors in three populations each of Gorilla and Pan were videotaped and digitized. The quantity of incisal and molar occlusal dental wear and the lengths of dentin-enamel junctions were measured in 220 adult and 31 juvenile gorilla and chimpanzee skulls. Rates of dental wear were calculated in juveniles by scoring the degree of wear between adjacent molars M1 and M2. Differences were compared by principal (major) axis analysis. ANOVAs compared means of wear amounts. Pearson correlation coefficients were calculated to compare the relationship between molar wear and incidence of dental disease. Results indicate that quantities of wear are significantly greater in permanent incisors and molars and juvenile molars of gorillas compared to chimpanzees. The lengths of dentin-enamel junctions were predominantly suboptimal. Western lowland gorillas have the highest quantities of wear and the most molars with suboptimal wear. The highest rates of wear are seen in Pan paniscus and Pan t. troglodytes, and the lowest rates are found in P.t. schweinfurthii and G. g. graueri. Among gorillas, G. b. beringei have the highest rates but low amounts of wear. Coefficients between wear and dental disease were low, but significant when all teeth were combined. Gorilla teeth are durable, and wear does not lead to mechanical senescence in this sample.

A finite element evaluation of mechanical function for 3 distal extension partial dental prosthesis designs with a 3-dimensional nonlinear method for modeling soft tissue.

Science.gov (United States)

Nakamura, Yoshinori; Kanbara, Ryo; Ochiai, Kent T; Tanaka, Yoshinobu

2014-10-01

The mechanical evaluation of the function of partial removable dental prostheses with 3-dimensional finite element modeling requires the accurate assessment and incorporation of soft tissue behavior. The differential behaviors of the residual ridge mucosa and periodontal ligament tissues have been shown to exhibit nonlinear displacement. The mathematic incorporation of known values simulating nonlinear soft tissue behavior has not been investigated previously via 3-dimensional finite element modeling evaluation to demonstrate the effect of prosthesis design on the supporting tissues. The purpose of this comparative study was to evaluate the functional differences of 3 different partial removable dental prosthesis designs with 3-dimensional finite element analysis modeling and a simulated patient model incorporating known viscoelastic, nonlinear soft tissue properties. Three different designs of distal extension removable partial dental prostheses were analyzed. The stress distributions to the supporting abutments and soft tissue displacements of the designs tested were calculated and mechanically compared. Among the 3 dental designs evaluated, the RPI prosthesis demonstrated the lowest stress concentrations on the tissue supporting the tooth abutment and also provided wide mucosa-borne areas of support, thereby demonstrating a mechanical advantage and efficacy over the other designs evaluated. The data and results obtained from this study confirmed that the functional behavior of partial dental prostheses with supporting abutments and soft tissues are consistent with the conventional theories of design and clinical experience. The validity and usefulness of this testing method for future applications and testing protocols are shown. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Innovative interventions to promote positive dental health behaviors and prevent dental caries in preschool children: study protocol for a randomized controlled trial.

Science.gov (United States)

Gao, Xiaoli; Lo, Edward Chin Man; McGrath, Colman; Ho, Samuel Mun Yin

2013-04-30

Dental caries (tooth decay) is highly prevalent and is largely attributable to unhealthy self-care behaviors (diet and oral hygiene). The conventional (health) education (CE), focusing on disseminating information and giving normative advice, often fails to achieve sustained behavioral changes. This study incorporates two innovative elements into CE: (i) motivational interviewing (MI), a client-centered counseling for changing behaviors, and (ii) an interactive caries risk assessment (RA) tool, which is devised to facilitate dental counseling and may enhance MI in several ways. Through a randomized, controlled, evaluator-blinded trial, three intervention schemes (CE, CE+MI, and CE+MI+RA) will be compared for their effectiveness in eliciting dentally healthy behaviors and preventing caries in preschool children. This study targets 3-year-old children who are at a critical stage for embedding health habits. Children with unfavorable dental behaviors (insufficient toothbrushing and/or frequent snacking) and their parents will be recruited from 12 participating kindergartens. Parent-child dyads (n=690) will be randomly assigned into three groups. In the first group (CE), oral health information and advice will be delivered to parents through pamphlets. In the second group (CE+MI), in addition to the pamphlets, individual MI counseling with each parent will be performed by one of two trained dental hygienists. In the third group (CE+MI+RA), besides pamphlets and MI, interactive RA will be integrated into MI to motivate parents and facilitate their informed decision making and goal planning. At baseline and after 12 and 24 months, parents will complete a questionnaire and children will undergo a dental examination. The effectiveness of the intervention schemes will be compared over 12 and 24 months. The primary outcome will be caries increment in children and proportion of caries-free children. Secondary outcomes will be changes in parental efficacy for protecting

Fate of the Molar Dental Lamina in the Monophyodont Mouse

Science.gov (United States)

Dosedělová, Hana; Dumková, Jana; Lesot, Hervé; Glocová, Kristýna; Kunová, Michaela; Tucker, Abigail S.; Veselá, Iva; Krejčí, Pavel; Tichý, František; Hampl, Aleš; Buchtová, Marcela

2015-01-01

The successional dental lamina (SDL) plays an essential role in the development of replacement teeth in diphyodont and polyphyodont animals. A morphologically similar structure, the rudimental successional dental lamina (RSDL), has been described in monophyodont (only one tooth generation) lizards on the lingual side of the developing functional tooth. This rudimentary lamina regresses, which has been proposed to play a role in preventing the formation of future generations of teeth. A similar rudimentary lingual structure has been reported associated with the first molar in the monophyodont mouse, and we show that this structure is common to all murine molars. Intriguingly, a lingual lamina is also observed on the non-replacing molars of other diphyodont mammals (pig and hedgehog), initially appearing very similar to the successional dental lamina on the replacing teeth. We have analyzed the morphological as well as ultrastructural changes that occur during the development and loss of this molar lamina in the mouse, from its initiation at late embryonic stages to its disappearance at postnatal stages. We show that loss appears to be driven by a reduction in cell proliferation, down-regulation of the progenitor marker Sox2, with only a small number of cells undergoing programmed cell death. The lingual lamina was associated with the dental stalk, a short epithelial connection between the tooth germ and the oral epithelium. The dental stalk remained in contact with the oral epithelium throughout tooth development up to eruption when connective tissue and numerous capillaries progressively invaded the dental stalk. The buccal side of the dental stalk underwent keratinisation and became part of the gingival epithelium, while most of the lingual cells underwent programmed cell death and the tissue directly above the erupting tooth was shed into the oral cavity. PMID:26010446

Dental caries and vitamin D3 in children with growth hormone deficiency: A STROBE compliant study.

Science.gov (United States)

Wójcik, Dorota; Krzewska, Aleksandra; Szalewski, Leszek; Pietryka-Michałowska, Elżbieta; Szalewska, Magdalena; Krzewski, Szymon; Pels, Elżbieta; Beń-Skowronek, Iwona

2018-02-01

Vitamin D may prevent dental caries. To date, no attempts have been made to examine the correlation between the incidence of caries and the concentrations of vitamin D in children with pituitary growth hormone deficiency.The study observed patients of the Department of Endocrinology and Diabetology of the University Paediatric Hospital of the Medical University of Lublin treated with human recombinant growth hormone for pituitary growth hormone deficiency (GHD). The study was conducted between October 2014 and June 2015. The study group consisted of 121 children and adolescents (6-17 years old), including 56 children from rural areas and 65 children from urban areas. The study group was stratified by area of residence.In our study, the increase in vitamin D3 [25(OH)D] levels reduced the D component by 0.66 per each 10 ng/mL of vitamin D3 concentration. The percentage of children with active caries in rural areas is 91.07% (n = 51), which is significantly higher than the percentage of children with active caries in urban areas (81.54%, n = 53).To date, information regarding the potential possibility of reducing the incidence of dental caries by means of increasing the levels of vitamin D was sidelined by paediatricians and dentists alike. Therefore, this aspect of caries prevention should be highlighted.

The Effects of Triethylene Glycol Dimethacrylate (TEGDMA on the Protein of Human Dental Pulp Cells

Directory of Open Access Journals (Sweden)

Ratna Farida

2013-07-01

Full Text Available Triethylene glycol dimethacrylate (TEGDMA is a common component of the bonding agents and resin composites used in dentistry for restorative dentistry. However, TEGDMA could be released from composite resins following incomplete polymerization and degradation processes by salivary enzyme in the mouth. Subsequently, TEGDMA is available in saliva and diffuses toward and affects the dental pulp which contains various cells, and thus may cause severe cytotoxic effects. Objectives: To determine the total protein concentration of human dental ulp cells following exposure to TEGDMA. Materials and Methods: Dental pulp cells were isolated from the pulp of the freshly extracted teeth and cultured in DMEM for 48 h (37ºC, 5% CO2. Then, 2 mM and 4 mM, and 8 mM TEGDMA were added to these cells and incubated for 24 h. The total protein was measured by Bradford Protein Assay. Results: The total protein concentration of dental pulp cells after exposure to 4 mM, 8mM, and 12 mM TEGDMA were statistically lower (22762.27 µg/ml ± 3385.87; 20268.44 µg/ml ± 1701.14; 23706.51 µg/ml ± 3214.52; respectively than the control group (24253.77 µg/ml ± 3072.99. Furthermore, the total protein concentration of culture medium after exposure to 4 mM, 8 mM, and 2 mM TEGDMA, were statistically higher (28635.85 µg/ml ± 2373.4; 35288.41 µg/ml ± 3469.48; 38199.79 µg/ml ± 2752.47; respectively when compared with the controls (27073.83 µg/ml ± 2772.47. Conclusion: 2 mM, 4 mM, and 8 mM TEGDMA caused cytotoxity to human dental pulp cells chowed by decreasing the total protein of cells and increasing the total protein of the culture medium.DOI: 10.14693/jdi.v16i3.102

PET/CT staging of T1-stage non-small cell lung cancer

International Nuclear Information System (INIS)

Salman, K. A.; Steinmann, C. H.; Von Schulthess, G. K.; Steinert, H. C.; Sukumar, V. P.

2009-01-01

Full text:Purpose: To evaluate the value of PET/CT in detecting occult metastases in patients with T 1 -stage non-small cell lung cancer (NSCLC). Method: Patients with proven NSCLC and T 1 -stage ( c m) were retrospectively analyzed. In all patients a whole-body 18 F-FDG PET/CT scan for initial staging was performed. The PET/CT findings were compared with all available clinical information, intra-operative findings and the histopathological results. Results: 95 patients (39 men, 56 women; age range, 19-85 years) were analyzed in our study. PET/CT in 68-95 patients correctly excluded mediastinal and distant metastases. In 17/95 patients (18%) mediastinal lymph-node metastases were proven (N 2 n=15; N 3 n=2). PET/CT correctly detected in 10/17 patients (58.8%) mediastinal nodal disease. The smallest mediastinal lymph-node metastasis detected by PET/CT had a size of 0.7 c m. In 7 patients PET/CT missed N 2 -stage. In three of these patients the SUVmax of the primary was c m. Only in one missed N 2 -stage metastasis was sized > 1.0 c m. The tumor histology (adenocarcinoma, squamous cell carcinoma) and location of the primary (central, periphery) did not influence the missed N 2 -stage by PET/CT. PET/CT diagnosed correctly N 3 -stage in 2 patients. 10/95 patients (10.5%) had distant metastases. PET/CT detected unknown M 1 -stage in 4/10 patients. In one patient a metastasis of the parietal pleura was missed by PET/CT. Conclusion: In our study, 28% patients with T 1 -stage NSCLC showed mediastinal or distant metastases. PET/CT was efficient in the detection of occult metastases. However, the sensitivity of PET/CT in mediastinal staging was only 64%.

99mTc-EDDA/HYNIC-Tyr(3)-octreotide for staging and follow-up of patients with endocrine gastro-entero-pancreatic tumors

International Nuclear Information System (INIS)

Gabriel, M.; Muehllechner, P.; Decristoforo, C.; Guggenberg, E. von; Kendler, D.; Moncayo, R.; Virgolini, I.; Prommegger, R.; Profanter, C.

2005-01-01

Aim: To evaluate the use of 99m Tc-EDDA-hydrazinonicotinyl-Tyr3 - octreotide (Tc-TOC) for staging and follow-up of neuroendocrine gastro-entero-pancreatic (GEP) tumors with special focus on the acquisition protocol including single photon emission computed tomography (SPECf). Methods: Eighty-eight patients (37 female, 51 male; age range: 16 to 81 years; mean age: 56.3 years) were studied: 42 patients for staging after initial histological confirmation and 46 patients during post-therapy follow-up. An average activity of 400 MBq of the radiopharmaceutical was injected. All tumors originated from neuroendocrine tissue of the gastroenteropancreatic tract. Whole body seintigrams at 4 h postinjection and SPECT of the abdomen were obtained in alI patients. Additional planar images of the abdomen were acquired at 2 h after injection in 68 patients. Results: The Tc-TOC scan result was true-positive in 56 patients, true-negative in 17, false-negative in 14, and false-positive in 1 patient. The false-positive finding was caused by a colonie adenoma. Overall, a scan sensitivity of 80% (56/70 patients), specificity of 94.4% (17/18 patients) and accuracy of 82.9% (73/88 patients) were calculated on patient basis. In total, Tc-TOC detected 357 foci in 69 patients. In 7 patients equivocaI findings were observed in the bowel at 4 h postinjection without corresponding tracer uptake in the scan 2 h earlier, meaning that these abnormal findings were correctly classified as non-malignant. In addition to planar views, SPECT revealed further 62 lesions

Fucoxanthin exerts differing effects on 3T3-L1 cells according to differentiation stage and inhibits glucose uptake in mature adipocytes

International Nuclear Information System (INIS)

Kang, Seong-Il; Ko, Hee-Chul; Shin, Hye-Sun; Kim, Hyo-Min; Hong, Youn-Suk; Lee, Nam-Ho; Kim, Se-Jae

2011-01-01

Highlights: → Fucoxanthin enhances 3T3-L1 adipocyte differentiation at an early stage. → Fucoxanthin inhibits 3T3-L1 adipocyte differentiation at intermediate and late stages. → Fucoxanthin attenuates glucose uptake by inhibiting the phosphorylation of IRS in mature 3T3-L1 adipocytes. → Fucoxanthin exerts its anti-obesity effect by inhibiting the differentiation of adipocytes at both intermediate and late stages, as well as glucose uptake in mature adipocytes. -- Abstract: Progression of 3T3-L1 preadipocyte differentiation is divided into early (days 0-2, D0-D2), intermediate (days 2-4, D2-D4), and late stages (day 4 onwards, D4-). In this study, we investigated the effects of fucoxanthin, isolated from the edible brown seaweed Petalonia binghamiae, on adipogenesis during the three differentiation stages of 3T3-L1 preadipocytes. When fucoxanthin was applied during the early stage of differentiation (D0-D2), it promoted 3T3-L1 adipocyte differentiation, as evidenced by increased triglyceride accumulation. At the molecular level, fucoxanthin increased protein expression of peroxisome proliferator-activated receptor γ (PPARγ), CCAAT/enhancer-binding protein α (C/EBPα), sterol regulatory element-binding protein 1c (SREBP1c), and aP2, and adiponectin mRNA expression, in a dose-dependent manner. However, it reduced the expression of PPARγ, C/EBPα, and SREBP1c during the intermediate (D2-D4) and late stages (D4-D7) of differentiation. It also inhibited the uptake of glucose in mature 3T3-L1 adipocytes by reducing the phosphorylation of insulin receptor substrate 1 (IRS-1). These results suggest that fucoxanthin exerts differing effects on 3T3-L1 cells of different differentiation stages and inhibits glucose uptake in mature adipocytes.

Dental esthetic satisfaction, received and desired dental treatments for improvement of esthetics.

Science.gov (United States)

Akarslan, Zühre Zafersoy; Sadik, Burak; Erten, Hüya; Karabulut, Erdem

2009-01-01

The purposes of this research were to investigate factors influencing patients' satisfaction with their present dental esthetic, received previous dental treatments on anterior teeth and basic treatments that they wanted to undergo to improve their dental appearance. A total of 1014 patients who attended a dental school in a major city in Turkey participated in the study. The participants were surveyed with a questionnaire containing questions about gender, age, education level, self-reported tooth appearance, received previous dental treatments on anterior teeth and desired basic esthetic dental treatments. Statistical analysis of the verifying data was made with descriptive statistics, chi2 test and multiple logistic regression analyses. According to the analyses of the verifying data, 55.1% of the patients were dissatisfied with the color of their teeth, 42.7% with dental appearance, 29.9% with crowding of anterior teeth, 23.3% were hiding teeth while smiling, 16.1% had non-esthetic restorations and 11.9% thought that their anterior teeth were protruding. Esthetic restoration was found to be the most-performed treatment recently (29.0%) and whitening of teeth was the most-desired dental treatment (49.0%). Gender, age and education level had an effect on satisfaction and received previous and desired dental treatments for improvement of esthetics. Many of the Turkish patients surveyed in the study were dissatisfied and desired the improvement of dental esthetics. Therefore, dentists should consider this as an important dimension in their practice.

Predictors of dental caries among children 7-14 years old in Northwest Ethiopia: a community based cross-sectional study.

Science.gov (United States)

Ayele, Fenta A; Taye, Belaynew W; Ayele, Tadesse A; Gelaye, Kassahun A

2013-01-18

Dental caries in children remains a significant public health problem. It is a disease with multifactorial causes. The aim of the study was to assess the prevalence and associated factors of dental caries among children between 7 to 14 years old. A community based cross-sectional study was conducted in Gondar town from June 2011 to September 2011. A total of 842 children were involved in the study. Multi-stage sampling technique was used to select the children. Pretested and structured questionnaires were used to collect data from mothers. Clinical examination of children was done using dental caries criteria set by world health organization. Data were entered, cleaned and edited using EPI Info version 3.5.1 and exported to SPSS version 16.0 for analysis. Binary multiple logistic regression analyses was applied to test the association. Four hundred sixty three (55%) children were females. The prevalence of dental caries was 306(36.3%).The educational status of children's father (AOR=0.3, 95%CI, 0.17, 0.80), monthly household income (AOR=0.59, 95%CI, 0.01, 0.45), regular teeth brushing (AOR=0.08, 95% CI, 0.03, 0.20) and using mouth rinsing (AOR=0.40, 95% CI, 0.2, 0.80) were found statistically significantly associated with dental caries. Dental caries were high among children in Gondar town. Low socioeconomic status and poor oral hygiene practices were the influencing factors for dental caries. Oral hygiene, dietary habits and access to dental care services are supreme important for the prevention of the problem.

El desgaste dental. ¿Un método fiable para la estimación de la edad?

OpenAIRE

Trujillo Mederos, Aioze; Calderón Ordóñez, Alejandra

2011-01-01

En aquest pòster es qüestiona si la utilització del desgast dental, per sí mateix, com a mètode per estimar l’edat de la mort és realment vàlid en totes les societats o si abans de proposar-se a utilitzar aquest mètode, s’ha de tenir en compte el context cultural de la població a estudiar. Per això, s’han seleccionat part de les restes bioantropològiques procedents del jaciment inca de Chinchero (Cuzco, Perú), l’edat osteològica dels quals no correspon amb l’edat estimada a partir del desgast...

Dental hard tissue modification and removal using sealed TEA lasers operating at λ=9.6 and 10.6 μm

Science.gov (United States)

Fried, Daniel; Murray, Michael W.; Featherstone, John D. B.; Akrivou, Maria; Dickenson, Kevin M.; Duhn, Clifford W.; Ojeda, Orlando P.

1999-05-01

Pulsed CO2 lasers have been shown to be effective for both removal and modification of dental hard tissue for the treatment of dental caries. In this study, sealed TEA laser systems optimally tuned to the highly absorbed 9.6 μm wavelength were investigated for application on dental hard tissue. Conventional TEA lasers produce a laser pulse wit a 100-200 ns gain switched spike followed by a long tail of about 1-4 μs in duration. the pulse duration is well matched to the 1-2 μs thermal relaxation time of the deposited laser energy at 9.6 μm and effectively heats the enamel to temperatures required for surface modification for caries prevention at absorbed fluences of less than 0.5 J/cm2. Thus, the heat deposition in the tooth and the corresponding risk, of pulpal necrosis form excessive heat accumulation is minimized. At higher fluences the high peak power of the gain-switched spike rapidly initiates a plasma that markedly reduces the ablation rate and efficiency, severely limiting applicability for hard tissue ablation. By slightly stretching the pulse to reduce the energy distributed in the initial 100-200 ns of the laser pulse, the plasma threshold can be raised sufficiently to increase the ablation rate by an order of magnitude. This results in a practical and efficient CO2 laser system for caries ablation and surface modification.

Dental neglect among children in Chennai.

Science.gov (United States)

Gurunathan, Deepa; Shanmugaavel, Arunachalam Karthikeyan

2016-01-01

Child dental neglect is the failure of a parent or guardian to meet the child's basic oral health needs such that the child enjoys adequate function and freedom from pain and infection, where reasonable resources are available to family or caregiver. The aim of the study is to evaluate the phenomenon of dental neglect among children in Chennai and to associate dental neglect with oral health status of children aged 3-12 years. This is a cross-sectional study involving 478 pairs of parents and children. Dental neglect scale and a questionnaire were used to assess the dental neglect score among parents of the children involved in the study. Oral health status of children was clinically assessed using oral hygiene index, decayed, extracted, filled teeth (def(t)), pulp, ulcers, fistula, abscess (pufa), decayed, missing, filled teeth (DMFT), PUFA as per the World Health Organization criteria and pufa/PUFA index. Student's t-test and one-way ANOVA were used appropriately for statistical analysis using SPSS software version 20.0. A significant higher dental neglect score was reported among the parents who reside in the suburban location (P 3 years (P = 0.001). A significant higher DMFT (P = 0.003), deft (P = 0 Child dental neglect is seen among the parents whose educational qualification was secondary, who reside in the suburban location, and who have not utilized the dental services for more than 3 years in Chennai. This dental neglect results in poorer oral health of children.

Autoradiographic study of 3H-proline incorporation by rat periodontal ligament, gingival connective tissue and dental pulp

International Nuclear Information System (INIS)

Kameyama, Y.

1975-01-01

The rates of 3 H-proline incorporation by the rat periodontal ligament, the gingival connective tissue and the dental pulp were studied by autoradiography. The rate of 3 H-proline incorporation by the periodontal ligament was 2.8 times higher than by the gingival connective tissue and 5 times higher than by the dental pulp. These differences were significant (p 3 H-proline incorporation by the periodontal ligament was significantly different (p 3 H-proline incorporation. The ratio of the rates of 3 H-proline incorporation by the three tissues did not correlate with the ratio of the cellular densities in the same three tissues. (author)

Assessing dental wear in reindeer using geometric morphometrical methods

Directory of Open Access Journals (Sweden)

Rolf Rødven

2009-01-01

Full Text Available Assessing dental wear is a useful tool for monitoring the interaction between ungulates and their food resources. However, using a univariate measurement for dental wear, like for instance height of the first molar may not capture the variation in dental wear important for the dental functional morphology. We here demonstrate a method for assessing dental wear for ungulates by using geometric morphometrical methods on 11 mandibles from nine Svalbard reindeer (Rangifer tarandus platyrhynchus. Shape measurements were obtained from a combination of fixed and sliding semi-landmarks, and dental wear was estimated using residual variation of the landmarks. The morphometric measurements obtained showed a good fit when compared to subjective scores of dental wear. We conclude that this method may give a more integrated and robust assessment of dental wear than univariate methods, and suggest it to be used as an alternative or in addition to traditional measurements of dental wear.Abstract in Norwegian / Sammendrag:Vurdering av tannslitasje hos rein ved hjelp av geometrisk morfometriske metoder Vurdering av tannslitasje er en anvendbar metode for å overvåke betydningen av miljøet for livshistorien til hovdyr. Imidlertid vil bruk av et enkelt mål, som for eksempel høyde på første molar, ikke nødvendigvis fange opp variasjonen i tannslitasje som er viktig i forhold til tennenes funksjonelle morfologi. I denne artikkelen viser vi hvordan tannslitasje kan vurderes ved å anvende geometrisk morfometriske metoder på 11 underkjever fra ni Svalbardrein (Rangifer tarandus platyrhynchus. Formen på tannrekka ble målt ved hjelp av en kombinasjon av fikserte og glidende semi-landemerker, hvor tannslitasje ble estimert ved å bruke residual variasjon av landemerkene. De morfometriske målene stemte godt overens med subjektiv vurdering av tannslitasje. Vi konkluderer at denne metoden kan gi en mer integrert og robust vurdering av tannslitasje enn univariate

Estimación de la edad dental en un grupo de niños venezolanos utilizando el método de Nolla

Directory of Open Access Journals (Sweden)

A. Carolina Medina

2017-08-01

Full Text Available La edad dental es un indicador de maduración corporal de importancia clínica en Odontología para la planificación del tratamiento de pacientes en crecimiento. El objetivo de esta investigación fue establecer la precisión de la determinación de la edad dental calculada con el método Nolla, en un grupo de niños y niñas del Área Metropolitana de Caracas. Materiales y Métodos: Se seleccionó una muestra estratificada por edad y género incluyendo 238 radiografías panorámicas de elevada calidad de personas sanas con edades entre 5 y 13 años. Se calculó la diferencia entre la edad cronológica y dental distribuyéndola entre géneros y grupos de edad. Los datos fueron analizados utilizando pruebas de correlación (Pearson, y diferencias entre medias t -Student, ANOVA, fijando p<0,05. El coeficiente k intraobservador fue de 0,68. Resultados: La correlación entre la edad dental cronológica y la edad dental fue de 0,92 años (p=0,01. La formación dental se presentó retrasada en varones al compararla con la de las hembras, alcanzando significación estadística sólo para los caninos y primer premolar superior. Para el total, la diferencia entre la edad dental y cronológica fue estadísticamente significativa, registrándose una subestimación de la edad en -0,88 ± 0,94 años (p=0,01. La subestimación fue mayor para las hembras (-1,04±0,93 años que para los varones (-0,72±0,94 años. Conclusión: Se concluye que el Método de Nolla puede ser utilizado para la identificación de etapas de formación dental en la población de niños y niñas venezolanos, aunque carece de precisión para el cálculo de su edad dental.

Human dental age estimation using third molar developmental stages: does a Bayesian approach outperform regression models to discriminate between juveniles and adults?

Science.gov (United States)

Thevissen, P W; Fieuws, S; Willems, G

2010-01-01

Dental age estimation methods based on the radiologically detected third molar developmental stages are implemented in forensic age assessments to discriminate between juveniles and adults considering the judgment of young unaccompanied asylum seekers. Accurate and unbiased age estimates combined with appropriate quantified uncertainties are the required properties for accurate forensic reporting. In this study, a subset of 910 individuals uniformly distributed in age between 16 and 22 years was selected from an existing dataset collected by Gunst et al. containing 2,513 panoramic radiographs with known third molar developmental stages of Belgian Caucasian men and women. This subset was randomly split in a training set to develop a classical regression analysis and a Bayesian model for the multivariate distribution of the third molar developmental stages conditional on age and in a test set to assess the performance of both models. The aim of this study was to verify if the Bayesian approach differentiates the age of maturity more precisely and removes the bias, which disadvantages the systematically overestimated young individuals. The Bayesian model offers the discrimination of subjects being older than 18 years more appropriate and produces more meaningful prediction intervals but does not strongly outperform the classical approaches.

Dental perspective on Sjögren’s syndrome: literature review.

Directory of Open Access Journals (Sweden)

Jesús Rodríguez

2015-06-01

Full Text Available The human body releases around 500-600mL of saliva daily, however when values of unstimulated whole saliva range from 0.1 to 0.2mL/min, there is a condition called Hyposalivation or hyposialia. Hyposalia is characterized by a large number of systemic conditions, including Sjögren’s syndrome, a chronic autoimmune disease that affects between 0.1 and 3% of the world population and is characterized by exocrinopathy of the salivary glands leading to glandular hypofunction and thus decreasing the normal salivary flow. Saliva is part of innate immunity, when there is a decrease in protein secretion, numerous oral manifestations occur such as dental caries, candidiasis, gingival disease, angular cheilitis, lymphomas of the salivary glands, dysphagia, erythematous and fissured tongue, among others. Currently there is no defined dental treatment, however there are alternative treatments by sialogogues and salivary substitutes, plus non-pharmacological therapies, which seek to maintain the ecology and oral conditions stable, in addition to preventive and restorative dental treatment for lesions already established as a consequence of the disease. The aim of this study is to conduct a literature review on the characteristics, classification, oral manifestations and dental management of Sjögren’s syndrome.

Modelling the enigmatic Late Pliocene Glacial Event - Marine Isotope Stage M2

Science.gov (United States)

Dolan, Aisling M.; Haywood, Alan M.; Hunter, Stephen J.; Tindall, Julia C.; Dowsett, Harry J.; Hill, Daniel J.; Pickering, Steven J.

2015-01-01

The Pliocene Epoch (5.2 to 2.58 Ma) has often been targeted to investigate the nature of warm climates. However, climate records for the Pliocene exhibit significant variability and show intervals that apparently experienced a cooler than modern climate. Marine Isotope Stage (MIS) M2 (~ 3.3 Ma) is a globally recognisable cooling event that disturbs an otherwise relatively (compared to present-day) warm background climate state. It remains unclear whether this event corresponds to significant ice sheet build-up in the Northern and Southern Hemisphere. Estimates of sea level for this interval vary, and range from modern values to estimates of 65 m sea level fall with respect to present day. Here we implement plausible M2 ice sheet configurations into a coupled atmosphere–ocean climate model to test the hypothesis that larger-than-modern ice sheet configurations may have existed at M2. Climate model results are compared with proxy climate data available for M2 to assess the plausibility of each ice sheet configuration. Whilst the outcomes of our data/model comparisons are not in all cases straight forward to interpret, there is little indication that results from model simulations in which significant ice masses have been prescribed in the Northern Hemisphere are incompatible with proxy data from the North Atlantic, Northeast Arctic Russia, North Africa and the Southern Ocean. Therefore, our model results do not preclude the possibility of the existence of larger ice masses during M2 in the Northern or Southern Hemisphere. Specifically they are not able to discount the possibility of significant ice masses in the Northern Hemisphere during the M2 event, consistent with a global sea-level fall of between 40 m and 60 m. This study highlights the general need for more focused and coordinated data generation in the future to improve the coverage and consistency in proxy records for M2, which will allow these and future M2 sensitivity tests to be interrogated

The Effect of Chemically Modified Tetracycline-3 on the Progression of Dental Caries in Rats.

Science.gov (United States)

Xu, Jun; Miao, Congcong; Tian, Zhenchuan; Li, Jinlu; Zhang, Chunmei; Yang, Dongmei

2018-02-07

Matrix metalloproteinases (MMPs) exist in human saliva and dentin and play an important role in the degradation of organic matrix in teeth. Chemically modified tetracycline-3 (CMT-3) is an inhibitor of MMPs. CMT-3 has been used experimentally to treat caries since 1999, but no distinction between dental caries prevalence and dentin caries prevalence has been described. A total of 65 Sprague-Dawley rats were randomly divided into three groups. The positive control group (25 rats) was inoculated with Streptococcus mutans (ATCC700610) and fed the cariogenic feed of improved Keyes Diet 2000. The CMT-3 group (25 rats) was also inoculated with S. mutans and fed the cariogenic feed of improved Keyes Diet 2000; the surfaces of rats' molars were daily treated with 0.02% CMT-3. The negative control group (15 rats) was only fed the standard rodent chow. At the end of the 10th week, the dental caries prevalence and dentin caries prevalence of each group were calculated, and the regions of caries were assessed. No caries was found in the negative control group. The dental caries prevalence of the CMT-3 and the positive control group was 75.0 and 83.3%, respectively (p > 0.05, Table 2). The dentin caries prevalence of the CMT-3 and the positive control group was 33.3 and 70.8%, respectively (p caries in the CMT-3 group was significantly lower than that in the positive control group (p caries, but could lower the prevalence and slow down the progression of dentin caries. © 2018 S. Karger AG, Basel.

Reduction of metal artifact in three-dimensional computed tomography (3D CT) with dental impression materials.

Science.gov (United States)

Park, W S; Kim, K D; Shin, H K; Lee, S H

2007-01-01

Metal Artifact still remains one of the main drawbacks in craniofacial Three-Dimensional Computed Tomography (3D CT). In this study, we tried to test the efficacy of additional silicone dental impression materials as a "tooth shield" for the reduction of metal artifact caused by metal restorations and orthodontic appliances. 6 phantoms with 4 teeth were prepared for this in vitro study. Orthodontic bracket, bands and amalgam restorations were placed in each tooth to reproduce various intraoral conditions. Standardized silicone shields were fabricated and placed around the teeth. CT image acquisition was performed with and without silicone shields. Maximum value, mean, and standard deviation of Hounsfield Units (HU) were compared with the presence of silicone shields. In every situation, metal artifacts were reduced in quality and quantity when silicone shields are used. Amalgam restoration made most serious metal artifact. Silicone shields made by dental impression material might be effective way to reduce the metal artifact caused by dental restoration and orthodontic appliances. This will help more excellent 3D image from 3D CT in craniofacial area.

Relationships between dental personnel and non-dental primary health care providers in rural and remote Queensland, Australia: dental perspectives.

Science.gov (United States)

Stuart, Jackie; Hoang, Ha; Crocombe, Len; Barnett, Tony

2017-06-19

Collaboration between dental practitioners and non-dental primary care providers has the potential to improve oral health care for people in rural and remote communities, where access to oral health services is limited. However, there is limited research on collaboration between these professional disciplines. The purpose of this paper was to explore the relationships between dental practitioners and non-dental primary care providers from rural and remote areas of Queensland and to identify strategies that could improve collaboration between these disciplines from the perspective of dental participants. Semi-structured interviews were conducted between 2013 and 2015 with visiting, local and regional dental practitioners (n = 12) who had provided dental services to patients from eight rural and remote Queensland communities that did not have a resident dentist. Participants were purposely recruited through a snow ball sampling technique. Interview data were analysed using thematic analysis with the assistance of QSR Nvivo v.10. Four major themes emerged from the data: (1) Communication between dental practitioners and rural primary care providers; (2) Relationships between dental and primary care providers; (3) Maintenance of professional dualism; (4) Strategies to improve interprofessional relationships (with subthemes: face to face meetings; utilisation of technology; oral health training for primary care providers; and having a community based oral health contact person). Participants observed that there was a lack of communication between the dental providers who saw patients from these rural communities and the primary care providers who worked in each community. This was attributed to poor communication, the high turnover of staff and the siloed behaviours of some practitioners. Visiting dental practitioners were likely to have stronger professional relationships with hospital nursing, administrative and allied health care staff who were often long term

Dental caries status and oral health practice among 12-15 year old children in Jorpati, Kathmandu.

Science.gov (United States)

Khanal, S; Acharya, J

2014-09-01

Oral health is an essential component of health throughout life. There has been a decline in dental caries and periodontal disease in developed countries which can be attributed to the implementation of preventive programmes but in developing countries dental diseases are still on the rise. Therefore this cross sectional study was carried out to assess the prevalence of dental caries and oral hygiene practices among 12 to 15 years old children. Self administered close ended questionnaires were used to assess the oral hygiene practice. The overall dental caries prevalence was 58.3% and the mean DMFT score was 1.2 (± 1.79) and the deft score was 0.6 (± 1.24). Majority of the children (84.1%) presented with the practice of brushing their teeth once everyday using tooth brush and toothpaste. Regular dental check up was very poor (5.6%) but 77.4% reported that they visited a dentist in case of pain or presence of stains in the teeth. Females (63.4%) and children studying in higher secondary class (74.2%) showed a "good" level of oral hygiene practice than males and children in secondary class respectively. Children having "good" practice presented with "low" dental caries severity. The utilization of dental services was poor in the children, therefore highlighting the necessity to implement preventive programmes is important which would help in reducing the incidence of the dental caries as well as aiding in prompt treatment of dental caries at its initial stages.

Pneumoconiosis and respiratory problems in dental laboratory technicians: Analysis of 893 dental technicians

Directory of Open Access Journals (Sweden)

Dilek Ergün

2014-10-01

Full Text Available Objectives: To explore the rate of pneumoconiosis in dental technicians (DTP and to evaluate the risk factors. Material and Methods: Data of 893 dental technicians, who were admitted to our hospital in the period January 2007–May 2012, from 170 dental laboratories were retrospectively examined. Demographic data, respiratory symptoms, smoking status, work duration, working fields, exposure to sandblasting, physical examination findings, chest radiographs, pulmonary function tests and high-resolution computed tomography results were evaluated. Results: Dental technicians’ pneumoconiosis rate was 10.1% among 893 cases. The disease was more common among males and in those exposed to sandblasting who had 77-fold higher risk of DTP. The highest profusion subcategory was 3/+ (according to the International Labour Organization (ILO 2011 standards and the large opacity rate was 13.3%. Conclusions: To the best of our knowledge, it was the largest DTP case series (N = 893/90 in the literature in English. Health screenings should be performed regularly for the early diagnosis of pneumoconiosis, which is an important occupational disease for dental technicians.

Expression of high mobility group box 1 in inflamed dental pulp and its chemotactic effect on dental pulp cells

International Nuclear Information System (INIS)

Zhang, Xufang; Jiang, Hongwei; Gong, Qimei; Fan, Chen; Huang, Yihua; Ling, Junqi

2014-01-01

Highlights: • HMGB1 translocated from nucleus to cytoplasm during dental pulp inflammation. • HMGB1and its receptor RAGE were up-regulated in hDPCs under LPS stimulation. • HMGB1 enhanced hDPCs migration and induces cytoskeleton reorganization. • HMGB1 may play a critical role in dental pulp repair during inflamed state. - Abstract: High mobility group box 1 protein (HMGB1) is a chromatin protein which can be released extracellularly, eliciting a pro-inflammatory response and promoting tissue repair process. This study aimed to examine the expression and distribution of HMGB1 and its receptor RAGE in inflamed dental pulp tissues, and to assess its effects on proliferation, migration and cytoskeleton of cultured human dental pulp cells (DPCs). Our data demonstrated that cytoplasmic expression of HMGB1 was observed in inflamed pulp tissues, while HMGB1 expression was confined in the nuclei in healthy dental pulp. The mRNA expression of HMGB1 and RAGE were significantly increased in inflamed pulps. In in vitro cultured DPCs, expression of HMGB1 in both protein and mRNA level was up-regulated after treated with lipopolysaccharide (LPS). Exogenous HMGB1 enhanced DPCs migration in a dose-dependent manner and induced the reorganization of f-actin in DPCs. Our results suggests that HMGB1 are not only involved in the process of dental pulp inflammation, but also play an important role in the recruitment of dental pulp stem cells, promoting pulp repair and regeneration

Expression of high mobility group box 1 in inflamed dental pulp and its chemotactic effect on dental pulp cells

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xufang, E-mail: xufang.zhang@student.qut.edu.au [Department of Operative Dentistry and Endodontics, Guanghua School of Stomatology, Guangdong Province Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China); Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane, QLD 4059 (Australia); Jiang, Hongwei, E-mail: jianghw@163.com [Department of Operative Dentistry and Endodontics, Guanghua School of Stomatology, Guangdong Province Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China); Gong, Qimei, E-mail: gongqmei@gmail.com [Department of Operative Dentistry and Endodontics, Guanghua School of Stomatology, Guangdong Province Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China); Fan, Chen, E-mail: c3.fan@student.qut.edu.au [Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane, QLD 4059 (Australia); Huang, Yihua, E-mail: enu0701@163.com [Department of Operative Dentistry and Endodontics, Guanghua School of Stomatology, Guangdong Province Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China); Ling, Junqi, E-mail: lingjq@mail.sysu.edu.cn [Department of Operative Dentistry and Endodontics, Guanghua School of Stomatology, Guangdong Province Key Laboratory of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China)

2014-08-08

Highlights: • HMGB1 translocated from nucleus to cytoplasm during dental pulp inflammation. • HMGB1and its receptor RAGE were up-regulated in hDPCs under LPS stimulation. • HMGB1 enhanced hDPCs migration and induces cytoskeleton reorganization. • HMGB1 may play a critical role in dental pulp repair during inflamed state. - Abstract: High mobility group box 1 protein (HMGB1) is a chromatin protein which can be released extracellularly, eliciting a pro-inflammatory response and promoting tissue repair process. This study aimed to examine the expression and distribution of HMGB1 and its receptor RAGE in inflamed dental pulp tissues, and to assess its effects on proliferation, migration and cytoskeleton of cultured human dental pulp cells (DPCs). Our data demonstrated that cytoplasmic expression of HMGB1 was observed in inflamed pulp tissues, while HMGB1 expression was confined in the nuclei in healthy dental pulp. The mRNA expression of HMGB1 and RAGE were significantly increased in inflamed pulps. In in vitro cultured DPCs, expression of HMGB1 in both protein and mRNA level was up-regulated after treated with lipopolysaccharide (LPS). Exogenous HMGB1 enhanced DPCs migration in a dose-dependent manner and induced the reorganization of f-actin in DPCs. Our results suggests that HMGB1 are not only involved in the process of dental pulp inflammation, but also play an important role in the recruitment of dental pulp stem cells, promoting pulp repair and regeneration.

Dental neglect among children in Chennai

Directory of Open Access Journals (Sweden)

Deepa Gurunathan

2016-01-01

Full Text Available Background: Child dental neglect is the failure of a parent or guardian to meet the child′s basic oral health needs such that the child enjoys adequate function and freedom from pain and infection, where reasonable resources are available to family or caregiver. Aim: The aim of the study is to evaluate the phenomenon of dental neglect among children in Chennai and to associate dental neglect with oral health status of children aged 3-12 years. Materials and Methods: This is a cross-sectional study involving 478 pairs of parents and children. Dental neglect scale and a questionnaire were used to assess the dental neglect score among parents of the children involved in the study. Oral health status of children was clinically assessed using oral hygiene index, decayed, extracted, filled teeth (def(t, pulp, ulcers, fistula, abscess (pufa, decayed, missing, filled teeth (DMFT, PUFA as per the World Health Organization criteria and pufa/PUFA index. Student′s t-test and one-way ANOVA were used appropriately for statistical analysis using SPSS software version 20.0. Results: A significant higher dental neglect score was reported among the parents who reside in the suburban location (P 3 years (P = 0.001. A significant higher DMFT (P = 0.003, deft (P = 0 < 0.001, pufa (P = 0.011, and debris index (P = 0.002 scores were seen in the higher dental neglect group. Conclusion: Child dental neglect is seen among the parents whose educational qualification was secondary, who reside in the suburban location, and who have not utilized the dental services for more than 3 years in Chennai. This dental neglect results in poorer oral health of children.

Serum Ionized Calcium Quantification for Staging Canine Periodontal Disease: A Preliminary Study.

Science.gov (United States)

Miguel Carreira, L; Daniela, Dias; Pedro, Azevedo

2015-06-01

Periodontal diseases (PD) are infectious, inflammatory, progressive diseases of the oral cavity affecting people and dogs. PD takes 2 forms: gingivitis and periodontitis. Diagnosing or staging PD can be achieved only with dental x-rays and periodontal probing, both of which require the use of general anesthesia in dogs. This study aimed to determine whether serum ionized calcium ([iCa(2+)]) levels can be useful in preliminary PD staging in dogs. A sample of 40 dogs (n = 40) was divided into 4 groups (n = 10 each) based on the following PD stages: G1 (gingivitis), G2 (initial periodontitis), G3 (moderate periodontitis), and G4 (severe periodontitis). The groups were then subjected to [iCa(2+)] quantification. Statistically significant differences were observed between PD stages and [iCa(2+)] for all stages except G3 and G4. Therefore, this parameter can be used as an additional tool to establish and monitor preliminary PD status. Copyright © 2015 Elsevier Inc. All rights reserved.

Clinical and Individual Variables in Children's Dental Fear: A School-Based Investigation.

Science.gov (United States)

Silveira, Ethieli Rodrigues da; Goettems, Marília Leão; Demarco, Flávio Fernando; Azevedo, Marina Sousa

2017-01-01

This cross-sectional study evaluated the prevalence of dental fear and associated factors in schoolchildren aged 8 to 12 years old, in Pelotas, southern Brazil. Schoolchildren enrolled in 20 public and private schools were selected using a multi-stage sample design. Sociodemographic characteristics, children's dental visit and oral hygiene habits were assessed by questionnaires. The Dental Anxiety Question was used to measure dental fear prevalence. Children's clinical examination evaluated presence of dental caries (DMFT/dmft index) and gingival bleeding. Data were analyzed using Poisson regression with robust variance (prevalence ratio; 95% confidence interval). One thousand two hundred and two children were included. Dental fear prevalence was 24.6%. After the adjustment, girls [PR=1.71 (CI 95%: 1.31-2.22)], children from poorer families [PR=1.96 (CI 95%: 1.36-2.83)], those who had decayed teeth (D/d index>0)[PR=1.32 (CI 95%: 1.01-1.72), and who had never been at the dentist [PR=1.85 (CI 95%: 1.42-2.41) remained significantly associated with dental fear. The prevalence of dental fear indicates that it is a common problem among schoolchildren. Early dental care and dental caries prevention are important factors to prevent dental fear.

Evaluation of the utility of 99m Tc-MDP bone scintigraphy versus MIBG scintigraphy and cross-sectional imaging for staging patients with neuroblastoma.

Science.gov (United States)

Gauguet, Jean-Marc; Pace-Emerson, Tamara; Grant, Frederick D; Shusterman, Suzanne; DuBois, Steven G; Frazier, A Lindsay; Voss, Stephan D

2017-11-01

Accurate staging of neuroblastoma requires multiple imaging examinations. The purpose of this study was to determine the relative contribution of 99m Tc-methylene diphosphonate (MDP) bone scintigraphy (bone scan) versus metaiodobenzylguanidine scintigraphy (MIBG scan) for accurate staging of neuroblastoma. A medical record search by the identified patients with neuroblastoma from 1993 to 2012 who underwent both MIBG and bone scan for disease staging. Cross-sectional imaging was used to corroborate the scintigraphy results. Clinical records were used to correlate imaging findings with clinical staging and patient management. One hundred thirty-two patients underwent both MIBG and bone scan for diagnosis. All stage 1 (n = 12), 2 (n = 8), and 4S (n = 4) patients had a normal bone scan with no skeletal MIBG uptake. Six of 30 stage 3 patients had false (+) bone scans. In the 78 stage 4 patients, 58/78 (74%) were both skeletal MIBG(+)/bone scan (+). In 56 of the 58 cases, skeletal involvement detected with MIBG was equal to or greater than that detected by bone scan. Only 3/78 had (-) skeletal MIBG uptake and (+) bone scans; all 3 had other sites of metastatic disease. Five of 78 had (+) skeletal MIBG with a (-) bone scan, while 12/78 had no skeletal involvement by either MIBG or bone scan. In no case did a positive bone scan alone determine a stage 4 designation. In the staging of neuroblastoma, 99m Tc-MDP bone scintigraphy does not identify unique sites of disease that affect disease stage or clinical management, and in the majority of cases bone scans can be omitted from the routine neuroblastoma staging algorithm. © 2017 Wiley Periodicals, Inc.

Laser beam melting 3D printing of Ti6Al4V based porous structured dental implants: fabrication, biocompatibility analysis and photoelastic study

Science.gov (United States)

Yang, Fei; Chen, Chen; Zhou, Qianrong; Gong, Yiming; Li, Ruixue; Li, Chichi; Klämpfl, Florian; Freund, Sebastian; Wu, Xingwen; Sun, Yang; Li, Xiang; Schmidt, Michael; Ma, Duan; Yu, Youcheng

2017-03-01

Fabricating Ti alloy based dental implants with defined porous scaffold structure is a promising strategy for improving the osteoinduction of implants. In this study, we use Laser Beam Melting (LBM) 3D printing technique to fabricate porous Ti6Al4V dental implant prototypes with three controlled pore sizes (200, 350 and 500 μm). The mechanical stress distribution in the surrounding bone tissue is characterized by photoelastography and associated finite element simulation. For in-vitro studies, experiments on implants’ biocompatibility and osteogenic capability are conducted to evaluate the cellular response correlated to the porous structure. As the preliminary results, porous structured implants show a lower stress-shielding to the surrounding bone at the implant neck and a more densed distribution at the bottom site compared to the reference implant. From the cell proliferation tests and the immunofluorescence images, 350 and 500 μm pore sized implants demonstrate a better biocompatibility in terms of cell growth, migration and adhesion. Osteogenic genes expression of the 350 μm group is significantly increased alone with the ALP activity test. All these suggest that a pore size of 350 μm provides an optimal provides an optimal potential for improving the mechanical shielding to the surrounding bones and osteoinduction of the implant itself.

Dysphagia management in a 3-year dental hygiene education programme in Japan.

Science.gov (United States)

Sato, Yoko; Miura, Ai; Saito, Atsushi

2005-11-01

This paper reports the development and evaluation of a dysphagia management course taught to the third year dental hygiene students during 2004-2005 as one framework of the new curriculum. The course consisted of lectures by specialists in each field, basic practice and clinical practice at a facility for the elderly. Evaluation of the course showed that improvements were found in students' understanding in certain subjects when compared with that during 2003-2004. Scores on the post-test were statistically significantly higher than those on the pre-test, showing that basic knowledge of the students had been improved. Introductory and follow-up lectures by dental hygiene instructors and appropriate basic practice enhanced the learning process of the students. In the clinical practice, the concept of 'dental hygiene process of care' was incorporated. The dental hygiene process facilitated the students in planning and implementing dental hygiene care that meets the needs of the individual clients. This active learning experience enhanced the students' understanding of dysphagia management. Although further improvements are necessary, this dysphagia management course should help dental hygienists in playing a greater role in the field of oral care and dysphagia rehabilitation.

Snapshot of cobalt, chromium and nickel exposure in dental technicians.

Science.gov (United States)

Kettelarij, Jolinde; Nilsson, Sara; Midander, Klara; Lidén, Carola; Julander, Anneli

2016-12-01

It is not fully understood where and how people are exposed to sensitizing metals. Much can be learnt from studying occupational settings where metals are handled. To quantify cobalt (Co), chromium (Cr) and nickel (Ni) exposure on the skin and in the air, and urine levels, in dental technicians working with tools and alloys that may result in skin and respiratory exposure. The metal skin dose was quantified with acid wipe sampling in dental technicians (n = 13). Air exposure was monitored by personal air sampling. Spot urine samples were collected for 24 h. Metals were analysed with inductively coupled plasma mass spectrometry. Before work, Co was detected on the skin of 10 participants (0.00025-0.0039 µg/cm 2 ), and Cr (0.00051-0.011 µg/cm 2 ) and Ni (0.0062-0.15 µg/cm 2 ) on the skin of all participants. After a 2-h period without hand washing, CoCr-exposed participants had more Co on the skin (p = 0.004) than non-CoCr-exposed participants. Co was found in 10 air samples (0.22-155 µg/m 3 ), Cr in nine (0.43-71 µg/m 3 ), and Ni in four (0.48-3.7 µg/m 3 ). Metal urine concentrations were considered to be normal. Dental technicians were exposed to Co, Cr and Ni on the skin and through the air, which was not reflected in the urine concentrations in this study. Cobalt skin doses may potentially elicit allergic contact dermatitis and cause sensitization. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The mixed dentition pantomogram: a valuable dental development assessment tool for the dentist.

Science.gov (United States)

Hudson, A P G; Harris, A M P; Mohamed, N

2009-11-01

The mixed dentition pantomogram is routinely used in paediatric patients. This paper discusses the value of the pantomogram for early identification of problems in dental development during the mixed dentition stage. Aspects regarding dental maturity, leeway space, the sequence of eruption of the permanent teeth, anomalies and the development of the canines will be reviewed.

Stage-specific fluorescence intensity of GFP and mCherry during sporulation In Bacillus Subtilis

Directory of Open Access Journals (Sweden)

Bailey Kirra

2010-11-01

Full Text Available Abstract Background Fluorescent proteins are powerful molecular biology tools that have been used to study the subcellular dynamics of proteins within live cells for well over a decade. Two fluorescent proteins commonly used to enable dual protein labelling are GFP (green and mCherry (red. Sporulation in the Gram positive bacterium Bacillus subtilis has been studied for many years as a paradigm for understanding the molecular basis for differential gene expression. As sporulation initiates, cells undergo an asymmetric division leading to differential gene expression in the small prespore and large mother cell compartments. Use of two fluorescent protein reporters permits time resolved examination of differential gene expression either in the same compartments or between compartments. Due to the spectral properties of GFP and mCherry, they are considered an ideal combination for co-localisation and co-expression experiments. They can also be used in combination with fluorescent DNA stains such as DAPI to correlate protein localisation patterns with the developmental stage of sporulation which can be linked to well characterised changes in DNA staining patterns. Findings While observing the recruitment of the transcription machinery into the forespore of sporulating Bacillus subtilis, we noticed the occurrence of stage-specific fluorescence intensity differences between GFP and mCherry. During vegetative growth and the initial stages of sporulation, fluorescence from both GFP and mCherry fusions behaved similarly. During stage II-III of sporulation we found that mCherry fluorescence was considerably diminished, whilst GFP signals remained clearly visible. This fluorescence pattern reversed during the final stage of sporulation with strong mCherry and low GFP fluorescence. These trends were observed in reciprocal tagging experiments indicating a direct effect of sporulation on fluorescent protein fluorophores. Conclusions Great care should be taken

Obtención y caracterización de células madre de pulpa dental humanas e interacción con β-fosfato tricálcico

OpenAIRE

Viña Almunia, José

2014-01-01

OBJETIVOS Objetivo general: Obtener células madre de pulpa dental, optimizar el método de obtención y de cultivo de estas células, y estudiar su interacción con el biomaterial β-fosfato tricálcico. Objetivos específicos: 1- Obtener células madre de pulpa dental. 2- Optimizar el método de obtención de células madre de pulpa dental. 3- Caracterizar células madre de pulpa dental usando microscopía confocal. 4- Estudiar el crecimiento de células madre de pulpa dental a dist...

32 CFR 199.13 - TRICARE Dental Program.

Science.gov (United States)

2010-07-01

... necessary for the residents to be professionally qualified to provide dental care for dependent children..., and licensed by an appropriate authority. (10) Dentist. Doctor of Dental Medicine (D.M.D.) or Doctor... active duty, Selected Reserve or Individual Ready Reserve member. (2) Child. To be eligible, the child...

A new cone-beam computed tomography system for dental applications with innovative 3D software

Energy Technology Data Exchange (ETDEWEB)

Pasini, Alessandro; Bianconi, D.; Rossi, A. [University of Bologna, Department of Physics, Bologna (Italy); NECTAR Imaging srl Imola (Italy); Casali, F. [University of Bologna, Department of Physics, Bologna (Italy); Bontempi, M. [CEFLA Dental Group Imola (Italy)

2007-02-15

Objective Cone beam computed tomography (CBCT) is an important image technique for oral surgery (dentoalveolar surgery and dental implantology) and maxillofacial applications. This technique requires compact sized scanners with a relatively low radiation dosage, which makes them suitable for imaging of the craniofacial region. This article aims to present the concept and the preliminary findings obtained with the prototype of a new CBCT scanner with dedicated 3D software, specifically designed for dental imaging. Methods The prototype implements an X-ray tube with a nominal focal spot of 0.5 mm operating at 70-100 kVp and 1-4 mA. The detector is a 6 in. image intensifier coupled with a digital CCD camera. Dosimetry was performed on a RANDO anthropomorphic phantom using Beryllium Oxide thermo-luminescent dosimeters positioned in the phantom in the following site: eyes, thyroid, skin (lips, cheeks, back of the neck), brain, mandible, maxilla and parotid glands. Doses were measured using four configurations, changing the field-of-view (4'' and 6'') and acquisition time (10 and 20 s) of the CBCT. Acquisitions were performed with different parameters regarding the x-ray tube, pixel size and acquisition geometries to evaluate image quality in relation to modulation transfer function (MTF), noise and geometric accuracy. Results The prototype was able to acquire a complete maxillofacial scan in 10-15 s. The CT reconstruction algorithm delivered images that were judged to have high quality, allowing for precise volume rendering. The radiation dose was determined to be 1-1.5 times that of the dose applied during conventional dental panoramic studies. Conclusion Preliminary studies using the CBCT prototype indicate that this device provides images with acceptable diagnostic content at a relatively low radiation dosage, if compared to systems currently available on the market. (orig.)

A new cone-beam computed tomography system for dental applications with innovative 3D software

International Nuclear Information System (INIS)

Pasini, Alessandro; Bianconi, D.; Rossi, A.; Casali, F.; Bontempi, M.

2007-01-01

Objective Cone beam computed tomography (CBCT) is an important image technique for oral surgery (dentoalveolar surgery and dental implantology) and maxillofacial applications. This technique requires compact sized scanners with a relatively low radiation dosage, which makes them suitable for imaging of the craniofacial region. This article aims to present the concept and the preliminary findings obtained with the prototype of a new CBCT scanner with dedicated 3D software, specifically designed for dental imaging. Methods The prototype implements an X-ray tube with a nominal focal spot of 0.5 mm operating at 70-100 kVp and 1-4 mA. The detector is a 6 in. image intensifier coupled with a digital CCD camera. Dosimetry was performed on a RANDO anthropomorphic phantom using Beryllium Oxide thermo-luminescent dosimeters positioned in the phantom in the following site: eyes, thyroid, skin (lips, cheeks, back of the neck), brain, mandible, maxilla and parotid glands. Doses were measured using four configurations, changing the field-of-view (4'' and 6'') and acquisition time (10 and 20 s) of the CBCT. Acquisitions were performed with different parameters regarding the x-ray tube, pixel size and acquisition geometries to evaluate image quality in relation to modulation transfer function (MTF), noise and geometric accuracy. Results The prototype was able to acquire a complete maxillofacial scan in 10-15 s. The CT reconstruction algorithm delivered images that were judged to have high quality, allowing for precise volume rendering. The radiation dose was determined to be 1-1.5 times that of the dose applied during conventional dental panoramic studies. Conclusion Preliminary studies using the CBCT prototype indicate that this device provides images with acceptable diagnostic content at a relatively low radiation dosage, if compared to systems currently available on the market. (orig.)

Smartphones and dental trauma: the current availability of apps for managing traumatic dental injuries.

Science.gov (United States)

Djemal, Serpil; Singh, Parmjit

2016-02-01

There is a general consensus regarding the lack of awareness regarding the emergency management of traumatic dental injuries amongst laypersons and dental professionals. This article aims to provide an overview of the apps available for traumatic dental injuries using smartphones. These apps may serve as a gateway for raising awareness of traumatic dental injuries. Three smartphone devices were used to access their respective app stores (Nokia Lumia 635 with Windows Phone OS 8.1; iPhone 5 with iOS 8.1; Samsung Galaxy Ace II with Android OS v2.3.6 Gingerbread). Nine phrases were searched: broken tooth/teeth; chipped tooth/teeth; dental emergency; dental injury; dental trauma; fractured tooth/teeth; knocked-out tooth/teeth; tooth/teeth injury; and tooth/teeth trauma. Seven apps for the Android and one app for the Apple operating system were relevant. The only Apple iOS app retrieved (Dental Trauma) was also found for the Android OS (Dental Trauma First Aid) and had the endorsement of the International Association of Dental Traumatology. AcciDent was the only app dedicated to traumatic dental injuries targeted solely towards dental professionals. Five other apps (Chipped Tooth Solution, Dental Crown Repair, Fixing Cracked Tooth, Repairing the Front Tooth and Solution to Broken Tooth) appeared to come from the same source (KBES). No traumatic dental injury apps were found for the Windows Phone OS. There are apps available for both patients and dentists that range in quality and on the whole lack real-life photographs. Future apps should continue to provide good quality, evidence-based and validated material. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Feasibility of sequential adjuvant chemotherapy with a 3-month oxaliplatin-based regimen followed by 3 months of capecitabine in patients with stage III and high-risk stage II colorectal cancer: JSWOG-C2 study.

Science.gov (United States)

Tsuruta, Atsushi; Yamashita, Kazuki; Tanioka, Hiroaki; Tsuji, Akihito; Inukai, Michio; Yamakawa, Toshiki; Yamatsuji, Tomoki; Yoshimitsu, Masanori; Toyota, Kazuhiro; Yamano, Taketoshi; Nagasaka, Takeshi; Okajima, Masazumi

2016-01-01

Six months of oxaliplatin-based chemotherapy is the standard adjuvant chemotherapy for completely resected stage III colorectal cancer (CRC). Also, patients with stage II CRC who are considered to be at high risk of disease recurrence often receive the same adjuvant chemotherapy treatment. We prospectively investigated the extent and degree of neuropathy suffered by stage III and high-risk stage II resectable CRC patients who underwent sequential approach involving 3 months of an oxaliplatin-based regimen followed by 3 months of capecitabine. Patients with completely resected stage III and high-risk stage II CRC aged ≥20 years were eligible. Patients were treated with folinic acid, fluorouracil, and oxaliplatin (FOLFOX) or capecitabine and oxaliplatin (CAPOX) for 3 months followed by capecitabine (2,500 mg/m 2 on days 1-14 every 3 weeks) for 3 months. Primary end points were frequency and the grade of oxaliplatin-induced neurotoxicity as evaluated using the physician-based Common Terminology Criteria for Adverse Events version 4.0 (CTCAE) grading and the patient-based scale, self-reported Patient Neurotoxicity Questionnaire. Ninety-one patients were enrolled and 86 patients assessed. Eighty-four percent of patients completed the planned oxaliplatin-based therapy for 3 months, and 63% of patients completed all treatments for the full 6 months. Overall incidences of grade 3 or 4 peripheral sensory or motor neuropathy according to the CTCAE were 3.5% and 1.2%, respectively. Regarding the peripheral sensory neuropathy, the proportion of Patient Neurotoxicity Questionnaire (grade C-E) and CTCAE (grade 2-4) at months 1.5/3/6 were 11.3/22.1/29.4% and 5.3/4.4/11.3%, respectively (Spearman correlation coefficient: 0.47). A sequential approach to adjuvant chemotherapy with 3 months of an oxaliplatin-based regimen followed by 3 months of capecitabine was tolerated by patients and associated with a low incidence of neuropathy.

Dental technician of the future

NARCIS (Netherlands)

Derksen, W.; Wismeijer, D.; Hanssen, S.; Tahmaseb, A.

2015-01-01

The new technologies in the field of dental science have not only changed the way in which dentists run their practice but have also dramatically changed the procedures carried out in dental laboratories. Mechanical engineering, incorporated CMM, laser milling, 3D printing and 3D design in a

Quantitative mRNA expression analysis of selected genes in patients with early-stage hypothyroidism induced by treatment with iodine-131.

Science.gov (United States)

Guo, Kun; Gao, Rui; Yu, Yan; Zhang, Weixiao; Yang, Yuxuan; Yang, Aimin

2015-11-01

The present study aimed to investigate the molecular markers indicative of early-stage hypothyroidism induced by treatment with iodine-131, in order to assist in further investigations of radio iodine‑induced hypothyroidism. A total of 59 patients diagnosed with hyperthyroidism (male/female, 16/43; median age, 46.4 years) and 27 healthy subjects (male/female, 7/21; median age, 44.6 years) were included in the present study. All patients were treated with appropriate doses of iodine‑131 and, three months following treatment, the patients were subdivided into two groups: A group with early‑stage hypothyroidism symptoms, and a group with non‑early‑stage hypothyroidism, including euthyroid patients and patients remaining with hyperthyroidism. Tissue samples from the patients and healthy subjects were collected by fine needle biopsies, and the mRNA expression levels of B-cell lymphoma 2 (Bcl‑2), nuclear factor (NF)‑κB, Ku70, epidermal growth factor receptor (EGFR), early growth response 1 (Egr‑1), TP53 and ataxia telangiectasia mutated were analyzed using reverse transcription‑quantitative polymerase chain reaction prior to iodine‑131 treatment. The association of the variation of target genes with susceptibility to early‑stage hypothyroidism was analyzed. Compared with normal subjects, the mRNA expression levels of Ku70 (0.768, vs. 3.304, respectively; Ptreatment with iodine‑131, 30 of the 59 (50.8%) patients with hyperthyroidism were diagnosed with early‑stage hypothyroidism, and in the early‑stage hypothyroidism group, the mRNA expression levels of Bcl‑2 were significantly decreased (Phypothyroidism group. The association between the changes in the expression levles of Bcl‑2 and Egr‑1 and susceptibility to early‑stage hypothyroidism was supported by multivariate regression analysis. No significant changes in the expression levels of the other target genes were detected. The opposing changes in the mRNA expression levels of Bcl‑2

75 FR 33169 - Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation...

Science.gov (United States)

2010-06-11

.... FDA-2008-N-0163] (formerly Docket No. 2001N-0067) RIN 0910-AG21 Dental Devices: Classification of Dental Amalgam, Reclassification of Dental Mercury, Designation of Special Controls for Dental Amalgam... the Federal Register of August 4, 2009 (74 FR 38686) which classified dental amalgam as a class II...

The dynamics of DNA methylation and hydroxymethylation during amelogenesis.

Science.gov (United States)

Yoshioka, Hirotaka; Minamizaki, Tomoko; Yoshiko, Yuji

2015-11-01

Amelogenesis is a multistep process that relies on specific temporal and spatial signaling networks between the dental epithelium and mesenchymal tissues. Epigenetic modifications of key developmental genes in this process may be closely linked to a network of molecular events. However, the role of epigenetic regulation in amelogenesis remains unclear. Here, we have uncovered the spatial distributions of 5-methylcytosine (5-mC) and 5-hydroxymethylcytosine (5-hmC) to determine epigenetic events in the mandibular incisors of mice. Immunohistochemistry and dot blotting showed that 5-hmC in ameloblasts increased from the secretory stage to the later maturation stage. We also demonstrated the distribution of 5-mC-positive ameloblasts with punctate nuclear labeling from sometime after the initiation of the secretory stage to the later maturation stage; however, dot blotting failed to detect this change. No obvious alteration of 5-mC/5-hmC staining in odontoblasts and dental pulp cells was observed. Concomitant with quantitative expression data, immunohistochemistry showed that maintenance DNA methyltransferase DNMT1 was highly expressed in immature dental epithelial cells and subsequently decreased at later stages of development. Meanwhile, de novo DNA methyltransferase Dnmt3a and Dnmt3b and DNA demethylase Tet family genes were universally expressed, except Tet1 that was highly expressed in immature dental epithelial cells. Thus, DNMT1 may sustain the undifferentiated status of dental epithelial cells through the maintenance of DNA methylation, while the hydroxylation of 5-mC may occur through the whole differentiation process by TET activity. Taken together, these data indicate that the dynamic changes of 5-mC and 5-hmC may be critical for the regulation of amelogenesis.

"Triple M" Effect: A Proposed Mechanism to Explain Increased Dental Amalgam Microleakage after Exposure to Radiofrequency Electromagnetic Radiation.

Science.gov (United States)

Mortazavi, Gh; Mortazavi, S A R; Mehdizadeh, A R

2018-03-01

A large body of evidence now indicates that the amount of mercury released from dental amalgam fillings can be significantly accelerated by exposure to radiofrequency electromagnetic fields (RF-EMFs) such as common mobile phones and magnetic resonance imaging (MRI). Studies performed on the increased microleakage of dental amalgam restorations after exposure to RF-EMFs have further supported these findings. Although the accelerated microleakage induced by RF-EMFs is clinically significant, the entire mechanisms of this phenomenon are not clearly understood. In this paper, we introduce "Triple M" effect, a new evidence-based theory which can explain the accelerated microleakage of dental amalgam fillings after exposure to different sources of electromagnetic radiation. Based on this theory, there are saliva-filled tiny spaces between amalgam and the tooth. Exposure of the oral cavity to RF-EMFs increases the energy of these small amounts of saliva. Due to the small mass of saliva in these tiny spaces, a small amount of energy will be required for heating. Moreover, reflection of the radiofrequency radiation on the inner walls of the tiny spaces causes interference which in turn produces some "hot spots" in these spaces. Finally, formation of gas bubbles in response to increased temperature and very rapid expansion of these bubbles will accelerate the microleakage of amalgam. Experiments that confirm the validity of this theory are discussed.

Three-dimensional dental arch changes of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusion

OpenAIRE

Peixoto,Adriano Porto; Pinto,Ary dos Santos; Garib,Daniela Gamba; Gonçalves,João Roberto

2014-01-01

INTRODUCTION: This study assessed the three-dimensional changes in the dental arch of patients submitted to orthodontic-surgical treatment for correction of Class II malocclusions at three different periods. METHODS: Landmarks previously identified on upper and lower dental casts were digitized on a three-dimensional digitizer MicroScribe-3DX and stored in Excel worksheets in order to assess the width, length and depth of patient's dental arches. RESULTS: During orthodontic preparation, the m...

Stage-related expression of mRNAs during pollen development in lily and tobacco.

Science.gov (United States)

Schrauwen, J A; de Groot, P F; van Herpen, M M; van der Lee, T; Reynen, W H; Weterings, K A; Wullems, G J

1990-09-01

Homogeneous populations of developing microspores and pollen from anthers of lily (Lilium longiflorum Thumb.) and tobacco (Nicotiana tabacum L.) show a continuous production of biomass, reaching a maximum in young pollen. The rate of RNA synthesis was 460 fg · h(-1) in young binucleate cells, 138 fg · h(-1) in late binucleate cells and 56 fg · h(-1) in microspores. The mRNA population in developing pollen can be separated into three groups. In the first group, certain types of mRNAs are present at a constant level during all stages of development. A second group is characteristic of young pollen and increases quantitatively until anthesis. A third group is seen transiently; to this belong mRNAs present only before mitosis or at a distinct cell stage after mitosis. Some of the translation products of this latter group of mRNAs showed similarities between lily and tobacco on two-dimensional gels in respect of molecular weight and isolectric point, indicating that those mRNAs and proteins play a role in the regulation of pollen development.

Evaluation of the field size in dental diagnostic radiology system

International Nuclear Information System (INIS)

Andrade, P.S.; Potiens, M.P.A.

2006-01-01

In this work the field size of a dental X rays machine was evaluated considering the recommendation of the Brazilian Health Ministry Regulation 453 which established basic lines of radiological protection in medical and dental diagnostic radiology. The diameter of the field should not be superior to 6 cm in the localized end point, limiting the radiated area and protecting the head-neck region. The measurements were carried out in a dental X rays machine, Dabi Atlante, model Spectro 70X Seletronic. For the field size or useful beam determination, the intra-oral films were positioned on a plain surface to be exposed in four stages and two focus-film distances (FFD), 20 cm and 27.5 cm: 1) with spacer cone; 2) without spacer cone; 3) with spacer cone and film-holding device; 4) without spacer cone and film-holding device. The results show that the diameter of the field size is satisfactory only for FFD = 20 cm. When the film-holding device is used, which is recommended by the Regulation 453, item 5.8 d(ii), the diameter of the field size exceeds the maximum recommended value of 6 cm. (authors)

Preoperative chemoradiotherapy for stage 2 or 3 esophageal squamous cell carcinoma

International Nuclear Information System (INIS)

Kawai, Takaharu; Kochi, Mitsugu; Fujii, Masashi

2016-01-01

The goal of this retrospective study was to investigate the efficacy and safety of preoperative chemoradiotherapy (NACR) in patients with Stage 2 or Stage 3 esophageal squamous cell carcinoma (SCC). Between 2004 and 2014, a total of 86 patients underwent surgical resection in conjunction with NACR for esophageal SCC at our institute. Thirty-one patients (36.0%) had Stage 2 disease and 55 patients (64.0%) had Stage 3 disease. The median age was 64 (43-81) years. A total of 78 patients received the full NACR regimen. The most common major Grade 3 hematologic toxic effects of NACR were leukopenia and neutropenia (48 cases), while the most common major Grade 3 non-hematologic toxic effect was anorexia (12 cases). One patient died in the hospital and no patients died within 30 days after surgery. A pathological complete response was achieved in 23 cases. Pathological staging (number of cases) was Stage 0 (23), Stage 1 (8), Stage 2 (28), Stage 3 (25), and Stage 4 (2). The 5-year overall survival rate (OS) was 51.0%, and was 83.2% in Stage 2 patients and 29.9% in Stage 3 patients. Preoperative NACR is safe and may improve OS and down-staging rates in patients with esophageal SCC. (author)

Improved PIXE analysis of micro- and trace elements in dental composites

International Nuclear Information System (INIS)

Preoteasa, E. A.; Ciortea, C.; Fluerasu, D.; Enescu, S. E.; Preoteasa, E.

2001-01-01

Due to the interactions occurring at the solid-solid and solid-liquid interfaces of a tooth's filling, the mineral elements of the restorative composite may induce a complex response of the organism. To study such problems, sensitive surface trace element analysis is required. Particle-induced X-ray emission (PIXE) has a detection limit one order of magnitude lower than XRF and has been used for hard dental tissues, but not yet for dental composites. We evaluated the potential of PIXE in a study of ten types of composites used in restorative dentistry, some of them with two color shades each. The samples were prepared as described for XRF. The measurements were performed with 3 MeV protons from a van de Graaff tandem linear accelerator, using a hyper pure Ge detector and collecting the spectra for 1.5-4 hours. The spectra were processed with the program Leone. The proton route in the sample calculated with the Trim program (∼ 50-100 μm) exceeded the size of mineral particles (0.02-30 μm), thus granularity did not affect the analysis. The PIXE analysis detected Z ≥ 19 elements in all composites, and Z≥14 elements in only one low Z material. PIXE detected generally the same dominant elements, but many more trace elements than XRF. Thus both Charisma (Kulzer) and Pekafill (Bayer) contained Ba as the major element, but trace elements were Ni, Zn, In, in the first, and Fe, Cu, Zn, Sr, Ag in the second. In other glass- and ceramics-based materials we found: Ca, Zr, Ba, Yb and traces of Sr, In, and possibly Ti in Tetric Ceram and in Ariston (both from Vivadent); Ca, Zr, Ba, Hf, possibly Mn, and traces of Ni, Ho, Ti, Fe, Cr in Valux Plus (3M Dental); Sr, Ba (major), K, Fe, Mn (minor), and traces of Ni, Zn, In, in F2000 Compomer (3M Dental); Ba (major) and traces of Fe, Ni, Sr in Surefil (Dentsply). In quartz-based materials we detected: Si, Ca, Ti, Fe and traces of K, Cl, Cr, Ni, Cu, Zn in Evicrol (Spofa); low and trace levels of Ca, Ti, Cr, Mn, Fe, Cu in

An epidemiological study of malocclusion and occlusal traits related to different stages of dental development

Directory of Open Access Journals (Sweden)

Lejla Redžepagić Vražalica

2017-04-01

Full Text Available Abstract Introduction: Various types of malocclusions present one of the most common dental problems of today’s population. Planning the implementation of orthodontic therapy, especially preventive and interceptive measures is one of many activities of public sector health, and it requires information regarding the prevalence of malocclusion in different parts of our country. Aim: The aim of this study was to determine the prevalence of malocclusion of preschool and school children in the city of Sarajevo. Materials and methods: This study was comprised of 373 children out of which 200 preschool and school children were included in the final sample according to the inclusion and exclusion criteria for participation. 100 children were five-year-olds with complete deciduous dentition, and 100 children were 14-year-olds with permanent dentition. The examined variables in the study were: dental status and existence of caries, overjet, depth of overbite, a presence of premature contacts, a presence of diastemas, crowding of teeth in the dental arch (for 14-year-olds and rotation of teeth in the dental arch (for 14-year-olds. Results: The prevalence of malocclusion was 58% in the group of preschool children and 83% in the group of school children. Conclusion: Results of this study demonstrate a need for the implementation of preventive and interceptive orthodontic methods in primary health care, which would reduce the need for expensive and long term orthodontic therapy.

Application of the ultrashort pulses in bovine dental enamel

International Nuclear Information System (INIS)

Todescan, Carla de Rago

2003-01-01

The interaction of lasers with the hard structures of the teeth, has found the excess of heat as a problem for its utilization. This study analyzes, in vitro, the interaction of the ultrashort pulse laser of Ti:safire (830 nm) with the bovine dental enamel. The system consisted in one main oscillator integrated with an amplifier (CPA). The pulses extracted before the temporal compression inside the amplifier had 30 ps, 1000 Hz and ∼1 mJ. The pulses extracted after the compression had 60 fs, 1000 Hz and ∼0,7 mJ. The M 2 was 1,3, the focal lens 2,5 cm, the focal distance 29,7 and a computerized translation stage x,y,z. We evaluated the amount of tissue removed per pulse,the resulting cavities and the surrounding tissues not irradiated, under OM and SEM. The fluency was the major factor for differentiating the two regimens studied, therefore, the intensity was not so important as we expected in this process. We found: one ablation region in 'cat tongue', one ablation length, one fluency ∼0,7 J/cm 2 for 30 ps and ∼0,5 J/cm 2 for 60 fs (50% of high speed burr), smooth edge for 30 ps and high precision of the sharp edge cut of submicrometric order for 60 fs. (author)

Dental calculus detection using the VistaCam.

Science.gov (United States)

Shakibaie, Fardad; Walsh, Laurence J

2016-12-01

The VistaCam® intra-oral camera system (Dürr Dental, Bietigheim-Bissingen, Germany) is a fluorescence system using light emitting diodes that produce a 405-nm violet light. This wavelength has potential application for detection of dental calculus based on red emissions from porphyrin molecules. This study assessed the digital scores obtained for both supragingival and subgingival calculus on 60 extracted teeth and compared these with lesions of dental caries. It has also examined the effect of saliva and blood on the fluorescence readings for dental calculus. VistaCam fluorescence scores for both supragingival (1.7-3.3) and subgingival calculus (1.3-2.4) were higher than those for sound root surfaces (0.9-1.1) and dental caries (0.9-2.2) ( p  calculus samples were not affected by the presence of saliva or blood. These results suggest that the use of violet light fluorescence could be a possible adjunct to clinical examination for deposits of dental calculus.

Changes in radiological protection and quality control in Spanish dental installations: 1996-2003.

Science.gov (United States)

Alcaraz-Baños, Miguel; Parra-Pérez, María del Carmen; Armero-Barranco, David; Velasco-Hidalgo, Francisco; Velasco-Hidalgo, Esteban

2009-10-01

The European Union has established specific directives concerning radiological protection which are obligatory for member States. In addition, all Spanish dental clinics with radiological equipment are required to have an annual quality control check. To analyze the effect of new European legislation on dental radiological practice in Spain and to determine whether it has resulted in lower doses being administered to patients. A total of 10,171 official radiological quality control reports on Spanish dental clinics, covering 16 autonomous regions, were studied following the passing of Royal Decree 2071/1995 on quality criteria in radiodiagnostic installations. The reports, compiled by U.T.P.R Asigma S.A., a company authorised by the Nuclear Safety Council, cover the years 1996 to 2003, which has enabled us to monitor the evolution of radiological procedures in dental clinics over a seven year period. According to the reports for 2003, 77.3 % of clinics complied with EU requirements, using equipment of 70 kVp, 8 mA, 1.5 mm Al filters, with a collimator length of 20 cm. However, non-compliance was detected in approximately a third (30.8%) of the equipment inspected: alterations in the kilovoltage used, exposure time, performance of the tubing, dosage, linearity/intensity of current and acoustic-luminous signal 6.86%. The mean skin dose reached 3.11 mGy for patients who received an x-ray of an upper molar, representing a decrease of 18% over the seven years studied. there has obviously been a general improvement in the parameters studied, but only 77.3% of the installations complied fully with official EU regulations concerning dental radiological protection.

Avaliação longitudinal de arcadas dentárias individualizadas com o método Borda WALA Lontigitudinal evaluation of dental arches individualizated by WALA ridge

Directory of Open Access Journals (Sweden)

Márcia de Fátima Conti

2011-04-01

Full Text Available INTRODUÇÃO: a forma da arcada dentária inferior é considerada uma das principais referências no diagnóstico, sendo um fator importante para a estabilidade do tratamento ortodôntico. OBJETIVOS: avaliar as alterações nas distâncias intercaninos e intermolares inferiores durante e 3 anos após a finalização do tratamento ortodôntico, no qual foi utilizado o método Borda WALA para individualização da forma da arcada dentária. MÉTODOS: a amostra foi composta por 20 pacientes (12 do sexo feminino e 8 do masculino, com idade média de 20,88 anos. Os modelos de gesso iniciais, finais e de pós-tratamento foram utilizados para medição das distâncias intercaninos e intermolares no centro da vestibular da coroa clínica e na largura da Borda WALA. Os dados foram avaliados por meio do teste ANOVA dependente seguido pelo teste de Tukey (pINTRODUCTION: The form of mandibular arch is considered one of the main references among the diagnostic tools because the maintenance of this arch form and dimension is an important factor for stability of orthodontic treatment. OBJECTIVES: To evaluate the changes in mandibular intercanine and intermolar widths during orthodontic treatment and 3 years of posttreatment, in which the WALA ridge was used for individualization of the mandibular arch form. METHODS: Sample comprised of 20 patients (12 women and 8 men, with a mean age of 20.88 years. The dental casts of the initial, final and post-treatment evaluation were used for measurement of the intercanine and intermolar distances in the center of the buccal surface of the clinical crown and in the width of the WALA ridge. Data were analyzed by means of ANOVA test followed by Tukey test (p<0.05. RESULTS: Indicated that there was a statistically significant difference in intercanine and intermolar distances among the three stages evaluated. These distances increased significantly with treatment, and presented a reduction in the post-treatment period

Intraoral 3D Scanning or Dental Impressions for the Assessment of Dental Arch Relationships in Cleft Care: Which is Superior?

Science.gov (United States)

Chalmers, E V; McIntyre, G T; Wang, W; Gillgrass, T; Martin, C B; Mossey, P A

2016-09-01

This study was undertaken to evaluate intraoral 3D scans for assessing dental arch relationships and obtain patient/parent perceptions of impressions and intraoral 3D scanning. Forty-three subjects with nonsyndromic unilateral cleft lip and palate (UCLP) had impressions taken for plaster models. These and the teeth were scanned using the R700 Orthodontic Study Model Scanner and Trios® Digital Impressions Scanner (3Shape A/S, Copenhagen, Denmark) to create indirect and direct digital models. All model formats were scored by three observers on two occasions using the GOSLON and modified Huddart Bodenham (MHB) indices. Participants and parents scored their perceptions of impressions and scanning from 1 (very good) to 5 (very bad). Intra- and interexaminer reliability were tested using GOSLON and MHB data (Cronbach's Alpha >0.9). Bland and Altman plots were created for MHB data, with each model medium (one-sample t tests, P 0.9) were good for all formats with the direct digital models having the lowest interexaminer differences. Participants had higher ratings for scanning comfort (84.8%) than impressions (44.2%) (P impressions (51.2%) (P > .05). None disliked scanning, but 16.3% disliked impressions. Data for parents and children positively correlated (P 3D scans was superior to indirect digital and to plaster models; Subjects with UCLP preferred intra-oral 3D scanning to dental impressions, mirrored by parents/carers; This study supports the replacement of conventional impressions with intra-oral 3D scans in longitudinal evaluations of the outcomes of cleft care.

Targeted p120-catenin ablation disrupts dental enamel development.

Science.gov (United States)

Bartlett, John D; Dobeck, Justine M; Tye, Coralee E; Perez-Moreno, Mirna; Stokes, Nicole; Reynolds, Albert B; Fuchs, Elaine; Skobe, Ziedonis

2010-09-16

Dental enamel development occurs in stages. The ameloblast cell layer is adjacent to, and is responsible for, enamel formation. When rodent pre-ameloblasts become tall columnar secretory-stage ameloblasts, they secrete enamel matrix proteins, and the ameloblasts start moving in rows that slide by one another. This movement is necessary to form the characteristic decussating enamel prism pattern. Thus, a dynamic system of intercellular interactions is required for proper enamel development. Cadherins are components of the adherens junction (AJ), and they span the cell membrane to mediate attachment to adjacent cells. p120 stabilizes cadherins by preventing their internalization and degradation. So, we asked if p120-mediated cadherin stability is important for dental enamel formation. Targeted p120 ablation in the mouse enamel organ had a striking effect. Secretory stage ameloblasts detached from surrounding tissues, lost polarity, flattened, and ameloblast E- and N-cadherin expression became undetectable by immunostaining. The enamel itself was poorly mineralized and appeared to be composed of a thin layer of merged spheres that abraded from the tooth. Significantly, p120 mosaic mouse teeth were capable of forming normal enamel demonstrating that the enamel defects were not a secondary effect of p120 ablation. Surprisingly, blood-filled sinusoids developed in random locations around the developing teeth. This has not been observed in other p120-ablated tissues and may be due to altered p120-mediated cell signaling. These data reveal a critical role for p120 in tooth and dental enamel development and are consistent with p120 directing the attachment and detachment of the secretory stage ameloblasts as they move in rows.

Dental Amalgam

Science.gov (United States)

... Products and Medical Procedures Dental Devices Dental Amalgam Dental Amalgam Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Dental amalgam is a dental filling material which is ...

Oral and dental affections in mercury-exposed workers

Energy Technology Data Exchange (ETDEWEB)

Fahmy, M.S.

1978-07-01

A total of 222 mercury-exposed workers in the Chlor-Alkali plant in Kuwait were investigated for oral and dental affections. The levels of mercury-vapor ranged from 566.6 microgram/m3 to 0.3 microgram/m3 in different parts of the factory. The periods of exposure varied from 1 to 11 years. Although the level of mercury vapor in the air and the period of exposure proved to be the main factors as regards the oral signs and symptoms, the oral hygiene condition and the individual sensitivity played substantial roles. Oral affections were found not to be due to allergy to mercury.

Comparative Clinical Study of Conventional Dental Implants and Mini Dental Implants for Mandibular Overdentures: A Randomized Clinical Trial.

Science.gov (United States)

Aunmeungtong, Weerapan; Kumchai, Thongnard; Strietzel, Frank P; Reichart, Peter A; Khongkhunthian, Pathawee

2017-04-01

Dental implant-retained overdentures have been chosen as the treatment of choice for complete mandibular removable dentures. Dental implants, such as mini dental implants, and components for retaining overdentures, are commercially available. However, comparative clinical studies comparing mini dental implants and conventional dental implants using different attachment for implant-retained overdentures have not been well documented. To compare the clinical outcomes of using two mini dental implants with Equator ® attachments, four mini dental implants with Equator attachments, or two conventional dental implants with ball attachments, by means of a randomized clinical trial. Sixty patients received implant-retained mandibular overdentures in the interforaminal region. The patients were divided into three groups. In Groups 1 and 2, two and four mini dental implants, respectively, were placed and immediately loaded by overdentures, using Equator ® attachments. In Group 3, conventional implants were placed. After osseointegration, the implants were loaded by overdentures, using ball attachments. The study distribution was randomized and double-blinded. Outcome measures included changes in radiological peri-implant bone level from surgery to 12 months postinsertion, prosthodontic complications and patient satisfaction. The cumulative survival rate in the three clinical groups after one year was 100%. There was no significant difference (p < 0.05) in clinical results regarding the number (two or four) of mini dental implants with Equator attachments. However, there was a significant difference in marginal bone loss and patient satisfaction between those receiving mini dental implants with Equator attachments and conventional dental implants with ball attachments. The marginal bone resorption in Group 3 was significantly higher than in Groups 1 and 2 (p < 0.05); there were no significant differences between Groups 1 and 2. There was no significant difference in

Recommendations for neoadjuvant pathologic staging (ypTNM) of cancer of the esophagus and esophagogastric junction for the 8th edition AJCC/UICC staging manuals.

Science.gov (United States)

Rice, Thomas W; Ishwaran, Hemant; Kelsen, David P; Hofstetter, Wayne L; Apperson-Hansen, Carolyn; Blackstone, Eugene H

2016-11-01

We report analytic and consensus processes that produced recommendations for neoadjuvant pathologic stage groups (ypTNM) of esophageal and esophagogastric junction cancer for the AJCC/UICC cancer staging manuals, 8th edition. The Worldwide Esophageal Cancer Collaboration provided data for 22,654 patients with epithelial esophageal cancers; 7,773 had pathologic assessment after neoadjuvant therapy. Risk-adjusted survival for each patient was developed. Random forest analysis identified data-driven neoadjuvant pathologic stage groups wherein survival decreased monotonically with increasing group, was distinctive between groups, and homogeneous within groups. An additional analysis produced data-driven anatomic neoadjuvant pathologic stage groups based only on ypT, ypN, and ypM categories. The AJCC Upper GI Task Force, by smoothing, simplifying, expanding, and assessing clinical applicability, produced consensus neoadjuvant pathologic stage groups. Grade and location were much less discriminating for stage grouping ypTNM than pTNM. Data-driven stage grouping without grade and location produced nearly identical groups for squamous cell carcinoma and adenocarcinoma. However, ypTNM groups and their associated survival differed from pTNM. The need for consensus process was minimal. The consensus groups, identical for both cell types were as follows: ypStage I comprised ypT0-2N0M0; ypStage II ypT3N0M0; ypStage IIIA ypT0-2N1M0; ypStage IIIB ypT3N1M0, ypT0-3N2, and ypT4aN0M0; ypStage IVA ypT4aN1-2, ypT4bN0-2, and ypTanyN3M0; and ypStage IVB ypTanyNanyM1. Absence of equivalent pathologic (pTNM) categories for the peculiar neoadjuvant pathologic categories ypTisN0-3M0 and ypT0N0-3M0, dissimilar stage group compositions, and markedly different early- and intermediate-stage survival necessitated a unified, unique set of stage grouping for patients of either cell type who receive neoadjuvant therapy. © 2016 International Society for Diseases of the Esophagus.

Application of Stem Cell Technology in Dental Regenerative Medicine.

Science.gov (United States)

Feng, Ruoxue; Lengner, Chistopher

2013-07-01

In this review, we summarize the current literature regarding the isolation and characterization of dental tissue-derived stem cells and address the potential of these cell types for use in regenerative cell transplantation therapy. Looking forward, platforms for the delivery of stem cells via scaffolds and the use of growth factors and cytokines for enhancing dental stem cell self-renewal and differentiation are discussed. We aim to understand the developmental origins of dental tissues in an effort to elucidate the molecular pathways governing the genesis of somatic dental stem cells. The advantages and disadvantages of several dental stem cells are discussed, including the developmental stage and specific locations from which these cells can be purified. In particular, stem cells from human exfoliated deciduous teeth may act as a very practical and easily accessibly reservoir for autologous stem cells and hold the most value in stem cell therapy. Dental pulp stem cells and periodontal ligament stem cells should also be considered for their triple lineage differentiation ability and relative ease of isolation. Further, we address the potentials and limitations of induced pluripotent stem cells as a cell source in dental regenerative. From an economical and a practical standpoint, dental stem cell therapy would be most easily applied in the prevention of periodontal ligament detachment and bone atrophy, as well as in the regeneration of dentin-pulp complex. In contrast, cell-based tooth replacement due to decay or other oral pathology seems, at the current time, an untenable approach.

Concentration Levels of Particulate Matter of Common Dental Lab Materials in a Military Dental Lab

Science.gov (United States)

2016-05-01

technician.” British Dental Journal 1999, 186:380-381 22 Suvarna SR. “Allergy to methyl methacrylate: a review.” Clinical Dentistry Vol 6, Issue 9...Health Organization , Geneva, Web, 1998. 24 Marquardt W, Seiss M, Hickel R, Reichl FX. “Volatile methacrylates in dental practices” Journal of... International Journal for Quality Research 5 th IQC, May 20 2011:595-602 35 Cimrin A, Nuray K, Canan K, Tertemiz KC. “Pneumoconiosis

What is dental ecology?

Science.gov (United States)

Cuozzo, Frank P; Sauther, Michelle L

2012-06-01

Teeth have long been used as indicators of primate ecology. Early work focused on the links between dental morphology, diet, and behavior, with more recent years emphasizing dental wear, microstructure, development, and biogeochemistry, to understand primate ecology. Our study of Lemur catta at the Beza Mahafaly Special Reserve, Madagascar, has revealed an unusual pattern of severe tooth wear and frequent tooth loss, primarily the result of consuming a fallback food for which these primates are not dentally adapted. Interpreting these data was only possible by combining our areas of expertise (dental anatomy [FC] and primate ecology [MS]). By integrating theoretical, methodological, and applied aspects of both areas of research, we adopted the term "dental ecology"-defined as the broad study of how teeth respond to the environment. Specifically, we view dental ecology as an interpretive framework using teeth as a vehicle for understanding an organism's ecology, which builds upon earlier work, but creates a new synthesis of anatomy and ecology that is only possible with detailed knowledge of living primates. This framework includes (1) identifying patterns of dental pathology and tooth use-wear, within the context of feeding ecology, behavior, habitat variation, and anthropogenic change, (2) assessing ways in which dental development and biogeochemical signals can reflect habitat, environmental change and/or stress, and (3) how dental microstructure and macro-morphology are adapted to, and reflect feeding ecology. Here we define dental ecology, provide a short summary of the development of this perspective, and place our new work into this context. Copyright © 2012 Wiley Periodicals, Inc.

On the Significance of Fuzzification of the N and M in Cancer Staging

Science.gov (United States)

Yones, Sara A; Moussa, Ahmed S; Hassan, Hesham; Alieldin, Nelly H

2014-01-01

The tumor, node, metastasis (TNM) staging system has been regarded as one of the most widely used staging systems for solid cancer. The “T” is assigned a value according to the primary tumor size, whereas the “N” and “M” are dependent on the number of regional lymph nodes and the presence of distant metastasis, respectively. The current TNM model classifies stages into five crisp classes. This is unrealistic since the drastic modification in treatment that is based on a change in one class may be based on a slight shift around the class boundary. Moreover, the system considers any tumor that has distant metastasis as stage 4, disregarding the metastatic lesion concentration and size. We had handled the problem of T staging in previous studies using fuzzy logic. In this study, we focus on the fuzzification of N and M staging for more accurate and realistic modeling which may, in turn, lead to better treatment and medical decisions. PMID:25089089

Differentiation of Human Dental Pulp Stem Cells into Dopaminergic Neuron-like Cells in Vitro.

Science.gov (United States)

Chun, So Young; Soker, Shay; Jang, Yu-Jin; Kwon, Tae Gyun; Yoo, Eun Sang

2016-02-01

We investigated the potential of human dental pulp stem cells (hDPSCs) to differentiate into dopaminergic neurons in vitro as an autologous stem cell source for Parkinson's disease treatment. The hDPSCs were expanded in knockout-embryonic stem cell (KO-ES) medium containing leukemia inhibitory factor (LIF) on gelatin-coated plates for 3-4 days. Then, the medium was replaced with KO-ES medium without LIF to allow the formation of the neurosphere for 4 days. The neurosphere was transferred into ITS medium, containing ITS (human insulin-transferrin-sodium) and fibronectin, to select for Nestin-positive cells for 6-8 days. The cells were then cultured in N-2 medium containing basic fibroblast growth factor (FGF), FGF-8b, sonic hedgehog-N, and ascorbic acid on poly-l-ornithine/fibronectin-coated plates to expand the Nestin-positive cells for up to 2 weeks. Finally, the cells were transferred into N-2/ascorbic acid medium to allow for their differentiation into dopaminergic neurons for 10-15 days. The differentiation stages were confirmed by morphological, immunocytochemical, flow cytometric, real-time PCR, and ELISA analyses. The expressions of mesenchymal stem cell markers were observed at the early stages. The expressions of early neuronal markers were maintained throughout the differentiation stages. The mature neural markers showed increased expression from stage 3 onwards. The percentage of cells positive for tyrosine hydroxylase was 14.49%, and the amount was 0.526 ± 0.033 ng/mL at the last stage. hDPSCs can differentiate into dopaminergic neural cells under experimental cell differentiation conditions, showing potential as an autologous cell source for the treatment of Parkinson's disease.

Relationship Between Dental Hygiene Students' Performance in an Oral Radiology Course and the National Board Dental Hygiene Examination: A Retrospective Study.

Science.gov (United States)

Liang, Hui; DeWald, Janice P; Solomon, Eric S

2018-02-01

Dental hygiene students' performance in oral radiology courses may give an early indication of their readiness prior to taking the National Board Dental Hygiene Examination (NBDHE). The aim of this study was to determine the relationship between dental hygiene students' performance in an oral radiology lecture course and their performance on the NBDHE. Data were collected for all 117 dental hygiene students at Texas A&M University College of Dentistry from 2006 to 2009 who took the NBDHE during their second year of the program. Their final grades and scores on three written section examinations in an oral radiology course taken in their first year were compared with their overall NBDHE scores and raw scores on the oral radiology and case study sections. Moderate correlations (0.3radiology course, with the strongest correlation with the final grade (r=0.488, pradiology, followed by scores in anatomic sciences; the weakest relationship was with scores in pharmacology. This relationship can help identify students who may need extra support in the oral radiology course and other courses to prepare them to succeed when they take the NBDHE. This study also contributes to understanding of the general relationship between dental hygiene program courses and students' success on the clinical licensing exam and will hopefully encourage other programs to assess their students' performance in this way.

Knowledge and attitude towards preventive dental care among dental faculties in Bangalore city

Directory of Open Access Journals (Sweden)

Nikhil Ahuja

2014-01-01

Full Text Available Background and Objectives: Preventive approach in dental practice has been cited as a reason for the decline in oral diseases and as a predominant part of the service-mix of dental practices in the future. Dental faculty′s knowledge and attitude toward prevention are important, since they have exceptionally important direct and indirect roles in shaping student′s preventive orientation and also potentially influencing their patient′s ability to take care of their teeth. Thus, this study was conducted to assess knowledge and attitudes toward preventive dental care among dental faculties and their relation to demographic and professional characteristics. Materials and Methods: A cross-sectional study was conducted among dental faculties in Bangalore city. Of 17 dental colleges, 4 were selected by simple random sampling. A total of 218 dental faculties was individually asked to complete a pretested questionnaire. The questionnaire requested information on dental faculty′s demographic and professional characteristics and their knowledge and attitudes toward preventive dental care. Descriptive, Chi-square tests, and ANOVA were used to analyze the data. Results: The highest knowledge was seen among dental faculties regarding prevention of malocclusion (3.51 ± 1.02 followed by oral cancer (2.95 ± 1.09 and periodontal diseases (2.86 ± 1.02. The least knowledge was seen for the prevention of caries (2.63 ± 1.35. The most positive attitudes regarding preventive dentistry was characterized as being essential (6.34 ± 1.05, useful (6.32 ± 1.07 and valuable (6.27 ± 1.00. Statistically significant differences were found in relation to knowledge and attitudes for all demographic and professional characteristics except for gender and Department of Teaching. Conclusion: Dental faculty seems to have differing levels of knowledge regarding oral diseases with positive attitudes seen regarding preventive dentistry. Continuing education activities and

Weaker dental enamel explains dental decay.

Science.gov (United States)

Vieira, Alexandre R; Gibson, Carolyn W; Deeley, Kathleen; Xue, Hui; Li, Yong

2015-01-01

Dental caries continues to be the most prevalent bacteria-mediated non-contagious disease of humankind. Dental professionals assert the disease can be explained by poor oral hygiene and a diet rich in sugars but this does not account for caries free individuals exposed to the same risk factors. In order to test the hypothesis that amount of amelogenin during enamel development can influence caries susceptibility, we generated multiple strains of mice with varying levels of available amelogenin during dental development. Mechanical tests showed that dental enamel developed with less amelogenin is "weaker" while the dental enamel of animals over-expressing amelogenin appears to be more resistant to acid dissolution.

Quantification and visualization of alveolar bone resorption from 3D dental CT images

International Nuclear Information System (INIS)

Nagao, Jiro; Mori, Kensaku; Kitasaka, Takayuki; Suenaga, Yasuhito; Yamada, Shohzoh; Naitoh, Munetaka

2007-01-01

Purpose A computer aided diagnosis (CAD) system for quantifying and visualizing alveolar bone resorption caused by periodontitis was developed based on three-dimensional (3D) image processing of dental CT images. Methods The proposed system enables visualization and quantification of resorption of alveolar bone surrounding and between the roots of teeth. It has the following functions: (1) vertical measurement of the depth of resorption surrounding the tooth in 3D images, avoiding physical obstruction; (2) quantification of the amount of resorption in the furcation area; and (3) visualization of quantification results by pseudo-color maps, graphs, and motion pictures. The resorption measurement accuracy in the area surrounding teeth was evaluated by comparing with dentist's recognition on five real patient CT images, giving average absolute difference of 0.87 mm. An artificial image with mathematical truth was also used for measurement evaluation. Results The average absolute difference was 0.36 and 0.10 mm for surrounding and furcation areas, respectively. The system provides an intuitive presentation of the measurement results. Conclusion Computer aided diagnosis of 3D dental CT scans is feasible and the technique is a promising new tool for the quantitative evaluation of periodontal bone loss. (orig.)

Improving productivity and quality of biodiesel from Chlorella vulgaris SDEC-3M through customized process designs

International Nuclear Information System (INIS)

Qi, Feng; Pei, Haiyan; Ma, Guixia; Zhang, Shuo; Mu, Ruimin

2016-01-01

Highlights: • Responses of growth and lipid in SDEC-3M to N concentrations were described. • The high lipid accumulation and biomass production were coexisted in buffer period. • Shorting N-deficient culture stage could improve lipid productivity. • A scheme of optimal designs was suggested to improve lipid productivity. • Biodiesels were meet standards and their performances varied with N-deficient time. - Abstract: In this study, temporal variations of microalgae growth and lipid accumulation in response to different nitrogen concentrations in media were investigated and discussed in detail, using a mutant Chlorella vulgaris SDEC-3M as a model. The results show that a short-term of dramatic lipid accumulation and nonsignificant descent of biomass productivities can be concomitant in SDEC-3M during early N-deficient stage (buffer period). It was found that the maximum lipid productivities of 63.52 mg L"−"1 d"−"1 occurred after 24 h N-shift. It means that, obtained lipid productivity under two-stage strategy with 24 h N-deficient stage was approximately three times as high as the maximum one obtained under N-rich condition and the final one obtained during longer N-deficient culture. Batch culture mode, higher light intensity and light/dark cycle in cooperation with N-rich/N-deficient cycle were also suggested as feasible scheme to improve lipid productivity in large scale culture. Additionally, the fatty acid profiles analysis indirectly showed that the properties of biodiesel from SDEC-3M majorly satisfied biodiesel standards. The fuel performances varied with N-deficient culture time, meaning that better combustion performance, oxidation stability, and exhaust emissions level related to longer N-deficient stage, while the biodiesel produced form N-deficient would perform well under low temperature. The results mean that SDEC-3M-derived biodiesels with customized process designs have commercial potential in the aspects of productivity and quality.

Dental case manager encounters: the association with retention in dental care and treatment plan completion.

Science.gov (United States)

Lemay, Celeste A; Tobias, Carol; Umez-Eronini, Amarachi A; Brown, Carolyn; McCluskey, Amanda; Fox, Jane E; Bednarsh, Helene; Cabral, Howard J

2013-01-01

Little is known about dental case managers as few programs have been scientifically evaluated. The goal of this study was to explore the impact of dental case manager on retention in dental care and completion of treatment plans, while specifically exploring the number of dental case manager encounters. Fourteen programs enrolled people with HIV/AIDS (PLWHA) in dental care and a longitudinal study between 2007 and 2009. The 758 participants had a total of 2715 encounters with a dental case manager over twelve months: 29% had a single encounter; 21% had two; 27% had 3-4 and; 23% had 5-29 encounters. Adjusting for baseline characteristics, participants receiving more encounters were significantly more likely to complete their Phase 1 treatment plan, be retained in dental care, and experience improvements in overall oral health status. Organizations considering efforts to improve the oral health of vulnerable, hard-to-engage populations should consider these findings when planning interventions. ©2012 Special Care Dentistry Association and Wiley Periodicals, Inc.

Phosphate Metabolism in CKD Stages 3–5: Dietary and Pharmacological Control

Directory of Open Access Journals (Sweden)

Markus Ketteler

2011-01-01

Full Text Available When compared to the available information for patients on dialysis (CKD stage 5D, data on the epidemiology and appropriate treatment of calcium and phosphate metabolism in the predialysis stages of chronic kidney disease (CKD are quite limited. Perceptible derangements of calcium and phosphate levels start to become apparent when GFR falls below 30 mL/min in some, but not all, patients. However, hyperphosphatemia may be a significant morbidity and mortality risk predictor in predialysis CKD stages. The RIND study, evaluating progression of coronary artery calcification in incident hemodialysis patients, indirectly demonstrated that vascular calcification processes start to manifest in CKD patients prior to the dialysis stage, which may be closely linked to early and invisible derangements in calcium and phosphate homeostasis. Novel insights into the pathophysiology of calcium and phosphate handling such as the discovery of FGF23 and other phosphatonins suggest that a more complex assessment of phosphate balance is warranted, possibly including measurements of fractional phosphate excretion and phosphatonin levels in order to appropriately evaluate disordered metabolism in earlier stages of kidney disease. As a consequence, early and preventive treatment approaches may have to be developed for patients in CKD stages 3-5 to halt progression of CKD-MBD.

Anisotropic local physical properties of human dental enamel in comparison to properties of some common dental filling materials.

Science.gov (United States)

Raue, Lars; Hartmann, Christiane D; Rödiger, Matthias; Bürgers, Ralf; Gersdorff, Nikolaus

2014-11-01

A major aspect in evaluating the quality of dental materials is their physical properties. Their properties should be a best fit of the ones of dental hard tissues. Manufacturers give data sheets for each material. The properties listed are characterized by a specific value. This assumes (but does not prove) that there is no direction dependence of the properties. However, dental enamel has direction-dependent properties which additionally vary with location in the tooth. The aim of this paper is to show the local direction dependence of physical properties like the elastic modulus or the thermal expansion in dental hard tissues. With this knowledge the 'perfect filling/dental material' could be characterized. Enamel sections of ∼400-500 μm thickness have been cut with a diamond saw from labial/buccal to palatal/lingual (canine, premolar and molar) and parallel to labial (incisor). Crystallite arrangements have been measured in over 400 data points on all types of teeth with x-ray scattering techniques, known from materials science. X-ray scattering measurements show impressively that dental enamel has a strong direction dependence of its physical properties which also varies with location within the tooth. Dental materials possess only little or no property direction dependence. Therefore, a mismatch was found between enamel and dental materials properties. Since dental materials should possess equal (direction depending) properties, worthwhile properties could be characterized by transferring the directional properties of enamel into a property 'wish list' which future dental materials should fulfil. Hereby the 'perfect dental material' can be characterized.

The relationship between dental caries and dental fluorosis in areas with moderate- and high-fluoride drinking water in Ethiopia.

Science.gov (United States)

Wondwossen, Fantaye; Astrøm, Anne Nordrehaug; Bjorvatn, Kjell; Bårdsen, Asgeir

2004-10-01

The aim of the study is to assess the relationship between caries and dental fluorosis in Ethiopian children living in Rift Valley areas known for endemic fluorosis. A total of 306 children (12-15 years old), selected from areas with moderate (0.3-2.2 mg/l), or high (10-14 mg/l) fluoride concentration in the drinking water were interviewed and examined for caries and dental fluorosis. Scorings were recorded according to the DMF system, and the Thylstrup-Fejerskov (TF) Index. Prevalence of dental fluorosis (TF-score > or = 1) was 91.8% (moderate area) and 100% (high-fluoride area). The corresponding caries prevalence and mean DMFT in the areas were 45.3% versus 61.6%, and 1.2 versus 1.8, respectively. Age and severity of dental fluorosis were found to be independent predictors for DMFT > or = 1. When compared with 12-year olds with TF-scores 0-4, odds ratios were 3.0 (95% CI 1.6-5.7) and 2.0 (95% CI 1.2-3.2) if TF-scores were > or = 5 and age 13-15 years, respectively. A positive relationship between caries and fluorosis was observed across tooth types in both areas. The percentage of children with DMFT > or = 1 was highest in groups with TF-score > or = 5 in the second molar, followed by the first molar. The present findings indicate that the second molar is the tooth most severely affected by dental fluorosis and dental caries. Dental caries increased with increasing severity of dental fluorosis, both in moderate- and high-fluoride areas. Thus, a positive relationship between dental caries and dental fluorosis was observed across various tooth types, in both areas. Copyright Blackwell Munksgaard, 2004

Caries and dental erosion: are Soroti children and adolescents at risk from increased soft-drink availability in Uganda?

Science.gov (United States)

Cheng, Jordan; Campbell, Karen

2016-12-01

An initial field study to investigate dental caries and dental erosion in children and adolescents in the community of Soroti, Uganda. A stratified two-stage cluster sample of 84 children (ages 8-10) and adolescents (ages 16-19) were recruited. A survey was undertaken to assess the state of determinants of oral health, oral hygiene practices, and soft-drink and sweetened-tea consumption. Intra-oral photographs were taken and reviewed to measure Decayed, Missing, and Filled Teeth (DMFT) and dental erosion. A significant difference was observed in DMFT between children and adolescents (3.7 ± 2.7 versus 2.1 ± 2.4 p=.02). A trend of lower erosion scores was seen in children compared to adolescents. Greater frequency of sweetened-tea consumption over soft-drinks was noted in both groups. This study did not reveal any relationship between different levels of cariogenic beverage consumption and DMFT or dental erosion in this sample group.

Developing a flexible core Dental Public Health curriculum for predoctoral dental and dental hygiene schools.

Science.gov (United States)

Atchison, Kathryn; Mascarenhas, Ana Karina; Bhoopathi, Vinodh

2015-01-01

The curriculum for graduating dental and dental hygiene students must prepare them to contribute to the improvement or maintenance of health for individual patient's and the public's health. The objective is to describe the background for and the process used to develop a core Dental Public Health Curriculum for such students. The process used was to solicit and review existing dental public health curriculum in dental and dental hygiene schools; review curriculum for other health professionals; identify the themes needed to frame the curriculum; select usable materials and identify gaps in existing curricular materials; and develop appropriate curriculum materials that would embody the competencies developed for undergraduate dental and dental hygiene education. Twenty-three topics were identified as embodying the eight competencies. Based on these topics, six courses, Principles of Dental Public Health, Evidence-Based Dentistry, Ethics and Dental Public Health, Dental Public Health Policy and Advocacy, Oral Health Promotion and Disease Prevention, and Oral Health Literacy and Dental Public Health, were prepared. Each course includes syllabus, PowerPoint presentations, student assignments and activities, instructor guide, and classroom discussion points. Depending on the hours available in the existing curriculum at the dental or hygiene school, lecture presentations and take home assignments/discussions may be used independently or in combination with presentations from other courses. In addition, individual discussions and activities may be used to integrate dental public health materials into other courses. A flexible curriculum is available at the AAPHD website to enable the incorporation of DPH topics into the curriculum. © 2015 American Association of Public Health Dentistry.

DİŞ PLAĞINDA pH ÖLÇÜM YÖNTEMLERİ-DENTAL PLAQUE pH MEASUREMENTS

OpenAIRE

Koparal, Ece; Eronat, Cemal

2013-01-01

ÖzetBir substraün yenmesinden sonra diş üzerindeki plakta meydana gelen pH değişikliklerinin saptanmasına dayanan plak pH'ı ölçüm çalışmaları üç yöntemle yapılabilmektedir. İn vitro plak pH ölçümünde, diş üzerinden plak örnekleri alınarak ağız boşluğunun dışında ölçüm gerçekleştirilmektedir. İn vivo plak pH'ı ölçümünde ise telemetri ve yüzey duyarlı elektrot ile plağa dokundurularak ağız içinde ölçümler yapılmaktadır.Anahtar sözcükler: Dental plak, pH, plak örnekleme yöntemi, yüzey ...

Dental and Dental Hygiene Intraprofessional Education: A Pilot Program and Assessment of Students' and Patients' Satisfaction.

Science.gov (United States)

Jones, Vickie E; Karydis, Anastasios; Hottel, Timothy L

2017-10-01

Interprofessional and intraprofessional education (when students from two or more professions or within the same profession, respectively, learn about, from, and/or with each other) is crucial for effective interdisciplinary collaboration. The aims of this study were to assess the effectiveness of a clinical intraprofessional education program for dental and dental hygiene students, based on students' expectations and satisfaction with the program and patients' satisfaction with the team-based care. The pilot program was developed at the University of Tennessee Health Science Center College of Dentistry, where dental hygiene students were paired randomly with dental students scheduled for prophylaxis, scaling and root planing, or periodontal maintenance. Surveys with questions about the students' expectations and satisfaction were distributed to 89 senior dental students and 27 senior dental hygiene students before and after team-based procedures. Another survey was distributed to 17 patients asking about their satisfaction with the team-based care. All 27 dental hygiene students (100% response rate), 51 dental students (57.3% response rate), and all 17 patients (100% response rate) participated in the surveys. The results showed that both the dental and dental hygiene students had high expectations and were overall satisfied with the intraprofessional education. The students' expectations and perceived educational gap (difference between expectations and satisfaction) differed for the dental and dental hygiene students (ppatients were overwhelmingly satisfied with the team-based care. These results suggest that this intraprofessional practice model provided an effective educational experience for both dental and dental hygiene students and patients. The differences between the dental hygiene and dental students' expectations will help in the design of more effective training that promotes intraprofessional and interprofessional teamwork.

Health condition identification of multi-stage planetary gearboxes using a mRVM-based method

Science.gov (United States)

Lei, Yaguo; Liu, Zongyao; Wu, Xionghui; Li, Naipeng; Chen, Wu; Lin, Jing

2015-08-01

Multi-stage planetary gearboxes are widely applied in aerospace, automotive and heavy industries. Their key components, such as gears and bearings, can easily suffer from damage due to tough working environment. Health condition identification of planetary gearboxes aims to prevent accidents and save costs. This paper proposes a method based on multiclass relevance vector machine (mRVM) to identify health condition of multi-stage planetary gearboxes. In this method, a mRVM algorithm is adopted as a classifier, and two features, i.e. accumulative amplitudes of carrier orders (AACO) and energy ratio based on difference spectra (ERDS), are used as the input of the classifier to classify different health conditions of multi-stage planetary gearboxes. To test the proposed method, seven health conditions of a two-stage planetary gearbox are considered and vibration data is acquired from the planetary gearbox under different motor speeds and loading conditions. The results of three tests based on different data show that the proposed method obtains an improved identification performance and robustness compared with the existing method.

Occupational violence against dental professionals in southern Nigeria.

Science.gov (United States)

Azodo, C C; Ezeja, E B; Ehikhamenor, E E

2011-09-01

To determine the prevalence of workplace violence in Oral healthcare centres against Nigerian dental professionals. A questionnaire-based cross-sectional survey of 175 randomly selected dental professionals working in Oral healthcare centres of University Teaching Hospitals in Southern Nigeria was conducted. The survey response rate was 78.9%. The respondents were dentists (58.0%), dental nurses (18.1%), dental technologists (12.3%), dental therapists (8.0%) and dental record officers (3.6%). The prevalence of violence in Nigerian Oral healthcare centres was 31.9%. There was no statistically significant difference in the prevalence of violence against dentist and dental auxiliaries. Violence was often associated with long waiting time (27.3%), cancellation of appointment (13.6%), outcome of patient's treatment (11.4%), alcohol intoxication (9.1%), psychiatric patient (6.8%,) patient's bill (4.5%) and others (27.3%). Non-physical violence in form of loud shouting (50.0%) threat (22.7%), sexual harassment (6.8%) and swearing (2.3%) constituted the majority while physical violence in form of bullying and hitting constituted the remaining 18.2%. The main perpetrators of the violence were patients (54.5%) and patient's relatives/friends (18.2%). The expressed impact of violence among the respondents include fear (18.2%), impaired job performance (15.9%), psychological problems (13.6%) and off duty (9.1%). No impact was declared by 43.2% of respondents. The prevalence of workplace violence in Oral healthcare centres against dental professionals in Southern Nigeria was significant and had a substantial effect on dental professionals' well-being thus necessitating urgent attention.

Dental anomalies in primary dentition and their corresponding permanent teeth.

Science.gov (United States)

Gomes, R R; Fonseca, J A C; Paula, L M; Acevedo, A C; Mestrinho, H D

2014-05-01

The objectives of this paper are to estimate the prevalence of dental anomalies in primary dentition in a sample of 2- to 5-year-old Brazilian preschool children, determine their distribution, and investigate their occurrence in the succedaneous teeth of the sample compared with a control group of children with no dental anomalies in the primary dentition. The one-stage sample comprised 1,718 two to five-year-old children with fully erupted primary dentition clinically examined for dental anomalies. All children presenting dental anomalies underwent panoramic radiographs. Descriptive statistics were performed for the studied variables. A control group matched by sex and age was studied to compare the prevalence ratio for dental anomalies in the permanent dentition. The prevalence of dental anomalies in the primary dentition was 1.8 %, with no significant statistical difference between sexes. Double teeth were the most frequently observed. Dental anomalies on the succedaneous permanent teeth were diagnosed in 54.8 % of the children with affected primary dentition. The prevalence ratio (PR) for dental anomalies in the succedaneous permanent teeth was 17.1 (confidence interval (CI) 5.33-54.12) higher compared with the control group, higher in children with bilateral anomalies (PR = 31.2, CI 10.18-94.36). An association between anomalies of the permanent dentition and the presence of dental anomalies in primary teeth was observed, especially when they occur bilaterally. The results in the present study have a clinical relevance in the diagnosis of children with dental anomalies in primary dentition. Early identification of these anomalies can aid the dentist in planning dental treatment at the appropriate time.

Effect of nanoemulsion on dental unit waterline biofilm

Directory of Open Access Journals (Sweden)

Karthikeyan Ramalingam

2013-09-01

Full Text Available Bacterial biofilm in dental unit waterlines (DUWLs is a widespread problem and poses a potentially significant risk of infection to dental staff and patients. The present study investigates the level and composition of bacterial contamination of dental chair syringe waterlines and investigates the efficacy of a cetylpyridinium chloride-containing nanoemulsion disinfectant in reducing bacterial loads. Waterline biofilms exposed to nanoemulsion for 1 hour, 6 hours, 12 hours, 24 hours, 48 hours, and 72 hours showed high reduction of colonies, and very low counts after 12 hours and 24 hours (67 colony-forming units/mL were observed. Exposures for 48 hours and 72 hours showed no or few visible colonies (2 colony-forming units/mL. The nanoemulsion employed improves efficacy against microorganisms more than unemulsified components. DNA sequencing showed that the organisms in the waterline biofilm are primarily of soil or water origin. The findings indicate that nanoemulsion effectively disinfects waterlines to consistently meet the American Dental Association (ADA recommendation.

Dental TC: evaluation of the inferior dental channel

International Nuclear Information System (INIS)

Sanchez, F.; Carrascosa, P.; Urtube, S.; Carrascosa, J.

2000-01-01

To determine the location and identification of the lower dental channel (LDC) and to show the measures, guides, and different lesions that might affect it, the authors offer a retrospective and descriptive analysis of 36 CT' exams of the jaw, as a pre-implant evaluation. A Picker PQ 500 helicoidal was used. Under the 'Dental' software program, the cross-sections were reprocessed at a Voxel Q work station. The findings were divided in 3 groups: 1) Optimal visualization of the LDC in 28 patients (78%); 2) Difficult visualization of the LDC in 6 patients (16,5%); 3) The LDC was not identified in 2 patients (5,5%). Furthermore, lesions affecting the LDC were identified in 5 patients (14%) included in group 1. (author)

Methacrylate and acrylate allergy in dental personnel.

Science.gov (United States)

Aalto-Korte, Kristiina; Alanko, Kristiina; Kuuliala, Outi; Jolanki, Riitta

2007-11-01

Methacrylates are important allergens in dentistry. The study aimed to analyse patch test reactivity to 36 acrylic monomers in dental personnel in relation to exposure. We reviewed the test files at the Finnish Institute of Occupational Health from 1994 to 2006 for allergic reactions to acrylic monomers in dental personnel and analysed the clinical records of the sensitized patients. 32 patients had allergic reactions to acrylic monomers: 15 dental nurses, 9 dentists, and 8 dental technicians. The dentists and dental nurses were most commonly exposed to 2-hydroxyethyl methacrylate (2-HEMA), triethyleneglycol dimethacrylate (TREGDMA), and 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy) phenyl]propane (bis-GMA). 8 dentists and 12 dental nurses were allergic to 2-HEMA. The remaining dentist was positive to bis-GMA and other epoxy acrylates. The remaining 3 dental nurses reacted to diethyleneglycol diacrylate (DEGDA) or triethyleneglycol diacrylate (TREGDA), but not to monofunctional and multifunctional methacrylates. Our dental technicians were mainly exposed and sensitized to methyl methacrylate (MMA) and ethyleneglycol dimethacrylate (EGDMA). 1 technician reacted only to 2-HEMA, and another to ethyl methacrylate (EMA) and ethyl acrylate (EA). 2-HEMA was the most important allergen in dentists and dental nurses, and MMA and EGDMA in dental technicians. Reactions to bis-GMA, DEGDA, TREGDA, EMA and EA were relevant in some patients.

Visualisation of dental images

International Nuclear Information System (INIS)

Md Saion Salikin; Azuhar Ripin; Wan Hazlinda Ismail; Asmaliza Hashim; Norriza Mohd Isa; Suriany Sarmid

2005-01-01

Since the invention and the discovery of x-rays, physicians, surgeons and life scientists have been using images to diagnose and subsequently treat diseases. X-ray is also widely used in many imaging techniques to better understand basics anatomy, physiology and biology as well as testing and analytical work in physical science. In dentistry, x-ray technique has been employed to get a panoramic view of the whole teeth of a particular patient. A panoramic dental radiograph is very useful in dentistry for diagnostic purpose, denture preparation, as well as for orthodontic. Image visualisation is an important aspect especially for the dentists to analyse and proceed with a particulate dental treatment. In this project panoramic dental image obtained by using a standard phantom is visualised by using Interactive Data Language (IDL) software. A panoramic dental x-ray machine, Cranex3, is used to get a panoramic radiograph, which is subsequently digitized, by using Vidar digitizer (Sierra Plus). The 2D digitized image is enhance and apply other visualising techniques such as surface rendering and volume rendering technique using Interactive Data Language (IDL) software as a first step in 3D visualisation. In this paper, visualising of panoramic dental radiograph by using IDL is discussed in brief. (Author)

Computing facilities available to final-year students at 3 UK dental schools in 1997/8: their use, and students' attitudes to information technology.

Science.gov (United States)

Grigg, P; Macfarlane, T V; Shearer, A C; Jepson, N J; Stephens, C D

2001-08-01

To identify computer facilities available in 3 dental schools where 3 different approaches to the use of technology-based learning material have been adopted and assess dental students' perception of their own computer skills and their attitudes towards information technology. Multicentre cross sectional by questionnaire. All 181 dental students in their final year of study (1997-8). The overall participation rate was 80%. There were no differences between schools in the students' self assessment of their IT skills but only 1/3 regarded themselves as competent in basic skills and nearly 50% of students in all 3 schools felt that insufficient IT training had been provided to enable them to follow their course without difficulty. There were significant differences between schools in most of the other areas examined which reflect the different ways in which IT can be used to support the dental course. 1. Students value IT as an educational tool. 2. Their awareness of the relevance of a knowledge of information technology for their future careers remains generally low. 3. There is a need to provide effective instruction in IT skills for those dental students who do not acquire these during secondary education.

Evaluation of effect of 3D video glasses on perceived pain and unpleasantness induced by restorative dental treatment

DEFF Research Database (Denmark)

Bentsen, Bo; Svensson, Peter; Wenzel, Ann

2001-01-01

whether distraction induced by video glasses also had an effect on the perceived intensity of pain and unpleasantness during dental treatment. Pain and unpleasantness was evoked by the preparation (drilling) of a minor dental cavity (class I). Twenty-three patients (17 female and six male, age range 20......-49 years) with a need for an occlusal dental restoration in two homologous teeth participated in the study, In this split-mouth design, the patient received the dental treatment wearing 3D video glasses and without video glasses (control situation) in a randomized order. The tooth cavities were prepared...... in accordance with conventional techniques after mounting the video glasses. The patient rated the intensity of pain and unpleasantness on 100 mm visual analogue scales (VASs) after preparation of the first cavity; immediately after, the opposite tooth was prepared and again the volunteer rated the intensity...

Investigating Socioeconomic Position in Dental Caries and Traumatic Dental Injury among Children in Quebec.

Science.gov (United States)

Da Rosa, P; Rousseau, Marie-Claude; Edasseri, A; Henderson, M; Nicolau, B

2017-12-01

Socioeconomic position (SEP) is inversely associated with most oral health outcomes, but the patterns of association may vary depending on the specific outcome. We estimated associations between SEP and two oral health outcomes, dental caries and traumatic dental injuries (TDI), in Quebec children. We used data from the baseline visit of the QUALITY (QUebec Adipose and Lifestyle Investigation in Youth) Cohort, an ongoing study in Montreal and Quebec, Canada. The analytical sample included 590 children aged 8-10 years. Data on parents' SEP (household income, education) and children's health behaviours and involvement in sports were obtained through questionnaires and interviews. Oral health outcomes (dental caries and TDI in permanent teeth) were assessed by clinical oral exam. Negative binomial regression was used to model dental caries (DMFS index) and number of teeth with TDI adjusting for selected covariates. The mean (SD) DMFS and number of TDI were 0.61 (1.43) and 0.12 (0.43), respectively. Compared to the upper quartile of income, children in the lower quartile had a DMFS approximately 3 times higher (PRR=2.68, 95% CI: 1.43, 5.04). Adjusting for oral health and nutritional behaviours had no effect. Conversely, children in the highest income quartile had a 3 times higher number of teeth with TDI compared to the lowest quartile (PRR=3.14, 95% CI: 1.22, 8.08). Physical activity did not explain this relationship. Parents' education was not associated with dental caries or TDI. SEP seems to play a different role in the cause of dental caries and TDI. Copyright© 2017 Dennis Barber Ltd.

Exploration of critical thinking in dental hygiene education.

Science.gov (United States)

Beistle, Kimberly S; Palmer, Louann Bierlein

2014-12-01

This qualitative study explores the perceptions of dental hygiene faculty regarding issues surrounding critical thinking skills integration within their associate degree dental hygiene programs. Twenty faculty participated in the study, as drawn from 11 accredited associate degree dental hygiene programs in one Midwest state. Multiple sources of data were collected, including email questionnaires, individual follow-up phone interviews and artifacts. Interpretive analysis was conducted. Data analysis revealed that faculty generally understood critical thinking, but interpretations varied. Most do not use varied teaching strategies to promote critical thinking skills, and focus on one particular strategy--that of case studies. The participants identified the need for allied health-focused faculty development opportunities, and noted that calibration of instruction was needed. Despite challenges, faculty felt responsible for teaching critical thinking skills, and identified the need for time to build critical thinking skills into the curriculum. This study was conducted in response to the American Dental Education Association Commission on Change and Innovation's challenge for dental hygiene educators to comprehend their own knowledge on the concept of critical thinking related to research-based pedagogical approaches to teaching and learning. Findings revealed a strong desire among the dental hygiene faculty in this study to incorporate critical thinking into their work. They want to do what they believe is the right thing, but their actual knowledge of the definitional and application theories about critical thinking is still in the early stages of development. Regular and targeted faculty development opportunities are needed. Copyright © 2014 The American Dental Hygienists’ Association.

Occupational safety among dental health-care workers

Directory of Open Access Journals (Sweden)

Shigehiro Shimoji

2010-10-01

Full Text Available Shigehiro Shimoji1, Kohji Ishihama1,2, Hidefumi Yamada1, Masaki Okayama1, Kouichi Yasuda1,3, Tohru Shibutani3,4, Tadashi Ogasawara2,5, Hiroo Miyazawa2,3, Kiyofumi Furusawa11Department of Oral and Maxillofacial Surgery, Matsumoto Dental University, Shiojiri, Japan; 2Infection Control Team, 3Risk Management Working Team, Matsumoto Dental University Hospital, Shiojiri, Japan; 4Department of Dental Anesthesiology, 5Department of Special Care Dentistry, Matsumoto Dental University, Shiojiri, JapanAbstract: Compared to other health-care workers, dental health-care workers come in close contact with patients and use a variety of sharp and high-speed rotating instruments. It is important to understand the characteristics of the occupational accidents that occur. We reviewed incident reports from April 1, 2005, to March 31, 2010, at Matsumoto Dental University Hospital. In addition, questionnaires dealing with identification of occupational safety issues, especially splash exposures, were conducted for dentists, dental hygienists, and nurses. Thirty-two occupational injuries were reported during the study period, including 23 sharp instrument injuries (71.9%, 6 splash exposures (18.8%, and 3 others. Of the six splash exposures, only two cases involved potential contamination with blood or other potentially infectious patient material. Of the 66 workers who experienced sharps injuries, 20 workers (30.3%, 20/66 reported them to the hospital work safety team. The questionnaire revealed high incident of splash exposures and conjunctiva exposures: 87.9% (51/58 and 60.3% (35/58 in dentists and 88.6% (39/44 and 61.4% (27/44 in dental hygienists. The compliance rate for routine use of protective eyewear was 60.3% (35/58 for dentists and 34.1% (15/44 for hygienists. Of the presented informational items included in the questionnaire, those that strongly persuaded respondents to use protective eyewear were ‘splatters from the patient’s mouth contain blood�

Dental radiographic exposures in Portugal

International Nuclear Information System (INIS)

Carvalho, A.F.; Oliveira, A.D.; Amaral, E.M.; Carreiro, J.V.; Galvao, J.P.

1992-01-01

A survey of dental intra-oral radiography was carried out in Portugal in 1989 and 1990 in hospitals, clinics and private offices. About 25% of the operational X ray units were checked. A total of 847 x 10 3 films were estimated as having been performed in 1989 corresponding to a frequency of 86 films per 10 3 inhabitants, which amounts to about 12% of all radiological examinations. The median entrance absorbed dose for a molar tooth was calculated to be 6.3 mGy but 85% of measured doses were out of acceptable dose range for good practice. Improvement of image quality and reduction of patient dose can be mainly achieved by improving the quality of film processing

Economic impact of dental hygienists on solo dental practices.

Science.gov (United States)

Lazar, Vickie F; Guay, Albert H; Beazoglou, Tryfon J

2012-08-01

The fact that a significant percentage of dentists employ dental hygienists raises an important question: Are dental practices that utilize a dental hygienist structurally and operationally different from practices that do not? This article explores differences among dental practices that operate with and without dental hygienists. Using data from the American Dental Association's 2003 Survey of Dental Practice, a random sample survey of U.S. dentists, descriptive statistics were used to compare selected characteristics of solo general practitioners with and without dental hygienists. Multivariate regression analysis was used to estimate the effect of dental hygienists on the gross billings and net incomes of solo general practitioners. Differences in practice characteristics--such as hours spent in the practice and hours spent treating patients, wait time for a recall visit, number of operatories, square feet of office space, net income, and gross billings--were found between solo general practitioners who had dental hygienists and those who did not. Solo general practitioners with dental hygienists had higher gross billings. Higher gross billings would be expected, as would higher expenses. However, net incomes of those with dental hygienists were also higher. In contrast, the mean waiting time for a recall visit was higher among dentists who employed dental hygienists. Depending on personal preferences, availability of qualified personnel, etc., dentists who do not employ dental hygienists but have been contemplating that path may want to further research the benefits and opportunities that may be realized.

[Influence of different processing methods and mature stages on 3,29-dibenzoyl rarounitriol of Trichosanthes kirilowii seeds].

Science.gov (United States)

Liu, Jin-Na; Xie, Xiao-Liang; Yang, Tai-Xin; Zhang, Cun-Li; Jia, Dong-Sheng; Liu, Ming; Wen, Chun-Xiu

2014-04-01

To study the different mature stages and the best processing methods on the quality of Trichosanthes kirilowii seeds. The content of 3,29-dibenzoyl rarounitriol in Trichosanthes kirilowii seeds was determined by HPLC. The sample of different mature stages such as immature, near mature and fully mature and processed by different methods were studied. Fully mature Trichosanthes kirilowii seeds were better than the immatured, and the best processing method was dried under 60degrees C, the content of 3,29-dibenzoyl rarounitriol reached up to 131.63microlg/mL. Different processing methods and different mature stages had a significant influence on the quality of Trichosanthes kirilowii seeds.

Evaluation of radiological service of Dental Clinic, Uberlandia Federal University (MG-Brazil)

International Nuclear Information System (INIS)

Vieira, C.D.V.T.

1985-01-01

The management related problems and the quality of dental radiographs of the Radiographic Service of the Dental Clinic, Uberlandia Federal University (MG-Brazil) are evaluated. The results are based on the examinations of 404 dental files from patients atending the Dental Clinic in 1983. Frequency distribution, mean and percentages were computed for the variables studied. (M.A.C.) [pt

Survey of dental radiographic equipment and radiation doses in Finland

International Nuclear Information System (INIS)

Havukainen, R.

1988-01-01

The radiation dose exposure, and the faults in about 1 700 dental units inspected at dental surgeries by the Finnish Centre for Radiation and Nuclear Safety in 1981-1985, were analysed. The mean value of skin doses in the bite-wing projection was about 6.2 mGy, the range 0.5 to 151 mGy. The mean energy imparted per bite-wing examination was estimated as 0.68 mJ and that per panoramic examination as 1.2 mJ. That gives a total imparted energy of about 600 J per year for conventional dental examinations and about 420 J per year for panoramic examinations. This gives a total of 0.13 mJ from conventional and 0.089 mJ from panoramic examinations per inhabitant per year. The collective effective dose equivalent was calculated as about 9 manSv for conventional dental examinations and about 6 manSv for panoramic examinations. Twenty per cent of units had some fault which was capable of decreasing radiation safety. Forty per cent of units were served reparation orders or other remarks were made in inspection documents. Large doses were usually accounted for by incorrect film processing and malfunction of the exposure timer. (orig.)

Dental students' perceptions of dental specialties and factors influencing specialty and career choices.

Science.gov (United States)

Dhima, Matilda; Petropoulos, Vicki C; Han, Rita K; Kinnunen, Taru; Wright, Robert F

2012-05-01

The goals of this study were to 1) evaluate dental students' perceptions of dental specialties, 2) identify factors that play an important role in students' decision to pursue specialty training or career choices, and 3) establish a baseline of students' perceptions of the dental fields with the best future in terms of salary, personal and patient quality of life, and overall impact on the dental profession. Surveys were distributed to 494 students at the University of Pennsylvania School of Dental Medicine. Data were collected from 380 traditional four-year students and thirty advanced standing students. Chi-square tests, multivariate analysis, and logistic regressions were used to determine associations and independent contributions of student demographics to their perceptions of dental specialties and factors influencing specialty training or career choices. Debt was a statistically significant factor (p<0.001) in choosing specialty training or career independent of gender, age, or class year. Enjoyment of providing care in a specialty or field was identified as the single most important factor in choosing a specialty career. Half of the respondents had decided not to specialize. Pursuing postdoctoral general dentistry training and private practice in general dentistry were the most commonly reported plans after completion of dental school. Suggestions are made for ways to inform students about specialty training.

Diagnosis and treatment of abnormal dental pain.

Science.gov (United States)

Fukuda, Ken-Ichi

2016-03-01

Most dental pain is caused by an organic problem such as dental caries, periodontitis, pulpitis, or trauma. Diagnosis and treatment of these symptoms are relatively straightforward. However, patients often also complain of abnormal dental pain that has a non-dental origin, whose diagnosis is challenging. Such abnormal dental pain can be categorized on the basis of its cause as referred pain, neuromodulatory pain, and neuropathic pain. When it is difficult to diagnose a patient's dental pain, these potential alternate causes should be considered. In this clinical review, we have presented a case of referred pain from the digastric muscle (Patient 1), of pulpectomized (Patient 2), and of pulpectomized pain (Patient 3) to illustrate referred, neuromodulatory, and neuropathic pain, respectively. The Patient 1 was advised muscle stretching and gentle massage of the trigger points, as well as pain relief using a nonsteroidal anti-inflammatory and the tricyclic antidepressant amitriptyline. The pain in Patient 2 was relieved completely by the tricyclic antidepressant amitriptyline. In Patient 3, the pain was controlled using either a continuous drip infusion of adenosine triphosphate or intravenous Mg2+ and lidocaine administered every 2 weeks. In each case of abnormal dental pain, the patient's diagnostic chart was used (Fig.2 and 3). Pain was satisfactorily relieved in all cases.

Caries dental aguda del primer molar permanente en niños de 12 años

Directory of Open Access Journals (Sweden)

Daniel Enrique Reyes Romagosa

Full Text Available Introducción: el primer molar permanente es considerado la llave de la oclusión dentaria, la presencia de caries en éste es elevada, lo que dificulta el logro de las metas trazadas por organizaciones de salud a nivel mundial en este grupo de edad. Objetivo: determinar el comportamiento de la caries dental aguda en primer molar permanente en una población de 12 años de edad atendida en la Clínica Estomatológica Santa Cruz de la Parroquia Goaigoaza. Métodos: se realizó un estudio descriptivo transversal en la Clínica Estomatológica Santa Cruz. Parroquia Goaigoaza, municipio Puerto Cabello, estado Carabobo, en el período comprendido entre abril del 2009 a abril 2010. Se seleccionaron 97 pacientes de 12 años de edad los que constituyeron el universo y la muestra. Acudieron a la consulta por dolor debido a la presencia de caries dental aguda. Se registraron las variables: edad, sexo, grado clínico de la caries dental, estímulos externos que provocaron dolor, la cara dental y la arcada dentaria más afectadas. La información fue recogida mediante interrogatorio y examen clínico. Resultados: el sexo masculino representó el 63,9 %. La caries dental de 3er grado estuvo presente en un 68 %. Los estímulos externos que provocaron dolor fueron: el frío presente en 75,2 % y los alimentos dulces en 69,1 % en ambos sexos. El primer molar inferior derecho resultó más afectado (46,4 % que el izquierdo (36,1 %, así como la arcada dentaria inferior (25,8 % y la cara oclusal (64,9 %. Conclusiones: predominaron el sexo masculino y la caries dental aguda de 3er grado. El frío y los alimentos dulces fueron los estímulos externos más frecuentes. Los más afectados resultaron el primer molar inferior derecho, la cara oclusal y la arcada dentaria inferior.

First dental visit of a child

Directory of Open Access Journals (Sweden)

Meera R

2008-10-01

Full Text Available Objectives: The aim of the study was to assess the common chief complaints of the Indian children and the average age group at which they report for in their first dental visit. Materials and Methods: A retrospective study was carried out using the case records of 716 children who reported to the postgraduate section of Department of Pediatric dentistry, Meenakshi Ammal Dental College, Chennai, in 2007. The age groups of the children were divided into three categories 0-3 years, 3-6 years and 6-12 years. The various chief complaints were categorised as follows, Orientation to prevention, Routine visit, Deposits / Discoloration, Habits, Unerupted / Missing or Extra Tooth, Pain, Dental caries, Malocclusion, Trauma, others. The average age group and most common complaint at the first dental visit was assessed. A prospective study was done in January 2008, were 215 children were screened. The assessment was made as explained above. Results: Retrospective study Maximum number of children who reported for their first dental visit was between 6-12 years (59.08%. Most common chief complaint for the visit was pain (42.04%. Second common complaint being dental caries (28.49%. Prospective study Maximum number of children who reported for their first dental visit was between 6-12 years (69.77%. Most common chief complaint was dental caries (34.88%. Second common complaint being pain (27.91%. Conclusion: Children report for the first dental visit most commonly only after 6 years and for complaints like pain and dental caries. Orientation to prevention is not considered and preventive dentistry is yet to reach the common population in India.

Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine.

Science.gov (United States)

Revilla-León, Marta; Gonzalez-Martín, Óscar; Pérez López, Javier; Sánchez-Rubio, José Luis; Özcan, Mutlu

2017-11-17

To compare the accuracy of implant analog positions on complete edentulous maxillary casts made of either dental stone or additive manufactured polymers using a coordinate measuring machine (CMM). A completely edentulous maxillary model of a patient with 7 implant analogs was obtained. From this model, two types of casts were duplicated, namely conventional dental stone (CDS) using a custom tray impression technique after splinting (N = 5) and polymer cast using additive manufacturing based on the STL file generated. Polymer casts (N = 20; n = 5 per group) were fabricated using 4 different additive manufacturing technologies (multijet printing-MJP1, direct light processing-DLP, stereolithography-SLA, multijet printing-MJP2). CMM was used to measure the correct position of each implant, and distortion was calculated for each system at x-, y-, and z-axes. Measurements were repeated 3 times per specimen in each axis yielding a total of 546 measurements. Data were analyzed using ANOVA, Sheffé tests, and Bonferroni correction (α = 0.05). Compared to CMM, the mean distortion (μm) ranged from 22.7 to 74.9, 23.4 to 49.1, and 11.0 to 85.8 in the x-, y-, and z-axes, respectively. CDS method (x-axis: 37.1; z-axis: 27.62) showed a significant difference compared to DLP on the x-axis (22.7) (p = 0.037) and to MJP1 on the z-axis (11.0) (p = 0.003). Regardless of the cast system, x-axes showed more distortion (42.6) compared to y- (34.6) and z-axes (35.97). Among additive manufacturing technologies, MJP2 presented the highest (64.3 ± 83.6), and MJP1 (21.57 ± 16.3) and DLP (27.07 ± 20.23) the lowest distortion, which was not significantly different from CDS (32.3 ± 22.73) (p > 0.05). For the fabrication of the definitive casts for implant prostheses, one of the multijet printing systems and direct light processing additive manufacturing technologies showed similar results to conventional dental stone. Conventional dental stone casts could be accurately duplicated using some

Evaluación de la edad dental en niños venezolanos utilizando el método de Schour y Massler

Directory of Open Access Journals (Sweden)

Zapata-K

2014-01-01

Full Text Available Objetivo: La presente investigación pretende determinar la precisión del método propuesto por Schour y Massler para la estimación de la edad dental en un grupo de niños Venezolanos que asistió al Servicio de Ortodoncia de Interceptiva de la Universidad Central de Venezuela en el período de 2001-2011. Materiales y métodos: Se seleccionó una muestra estratifi por edad y sexo incluyendo radiografías panorámicas de alta calidad tomadas a pacientes sanos con edades de 4 a 10 años. Se determinó estadio de erupción (con barrera ósea, sin barrera ósea, en plano oclusal y formación radicular (etapas de Nolla en la muestra, comparando las medias con las tablas de Schour y Massler (ANOVA p=0.05 distribuyendo por rangos de edad. Resultados: La erupción dental fue similar a la graficada en las tablas de Schour y Massler, con un adelanto estadísticamente significavo para el incisivo central inferior y retardo para del primer premolar superior y segundo premolar inferior. La formación radicular estuvo retrasada en comparación con las tablas, siendo estadísticamente signifi\tpara las etapas fi\tde formación radicular del incisivo lateral inferior, el primer premolar superior, segundos premolares y segundo molar superior. Conclusiones: La estimación de edad dental utilizando las tablas de Schour y Massler fue apropiada en esta muestra de niños Venezolanos.

Preoperative nodal staging of non-small cell lung cancer using 99mTc-sestamibi spect/ct imaging

Directory of Open Access Journals (Sweden)

Juliana Muniz Miziara

2011-01-01

Full Text Available OBJECTIVES: The proper nodal staging of non-small cell lung cancer is important for choosing the best treatment modality. Although computed tomography remains the first-line imaging test for the primary staging of lung cancer, its limitations for mediastinum nodal staging are well known. The aim of this study is to evaluate the accuracy of hybrid single-photon emission computed tomography and computed tomography using 99mTc-sestamibi in the nodal staging of patients with non-small cell lung cancer and to identify potential candidates for surgical treatment. METHODS: Prospective data were collected for 41 patients from December 2006 to February 2009. The patients underwent chest computed tomography and single-photon emission computed tomography/computed tomography examinations with 99mTc-sestamibi within a 30-day time period before surgery. Single-photon emission computed tomography/computed tomography was considered positive when there was focal uptake of sestamibi in the mediastinum, and computed tomography scan when there was lymph nodes larger than 10 mm in short axis. The results of single-photon emission computed tomography and computed tomography were correlated with pathology findings after surgery. RESULTS: Single-photon emission computed tomography/computed tomography correctly identified six out of 19 cases involving hilar lymph nodes and one out of seven cases involving nodal metastases in the mediastinum. The sensitivity, specificity, positive predictive value, and negative predictive value for 99mTc-sestamibi single-photon emission computed tomography/computed tomography in the hilum assessment were 31.6%, 95.5%, 85.7%, and 61.8%, respectively. The same values for the mediastinum were 14.3%, 97.1%, 50%, and 84.6%, respectively. For the hilar and mediastinal lymph nodes, chest tomography showed sensitivity values of 47.4% and 57.1%, specificity values of 95.5% and 91.2%, positive predictive values of 90% and 57.1% and negative

Preoperative nodal staging of non-small cell lung cancer using 99mTc-sestamibi SPECT/CT imaging

International Nuclear Information System (INIS)

Miziara, Juliana Muniz; Rocha, Euclides Timoteo da; Miziara, Jose Elias Abrao; Garcia, Gustavo Fabene; Simoes, Maria Izilda Previato; Lopes, Marco Antonio; Kerr, Ligia Maria; Buchpiguel, Carlos Alberto

2011-01-01

Objectives: The proper nodal staging of non-small cell lung cancer is important for choosing the best treatment modality. Although computed tomography remains the first-line imaging test for the primary staging of lung cancer, its limitations for mediastinum nodal staging are well known. The aim of this study is to evaluate the accuracy of hybrid single-photon emission computed tomography and computed tomography using 99m Tc-sestamibi in the nodal staging of patients with non-small cell lung cancer and to identify potential candidates for surgical treatment. Methods: Prospective data were collected for 41 patients from December 2006 to February 2009. The patients underwent chest computed tomography and single-photon emission computed tomography/computed tomography examinations with 99m Tc-sestamibi within a 30-day time period before surgery. Single-photon emission computed tomography/computed tomography was considered positive when there was focal uptake of sestamibi in the mediastinum, and computed tomography scan when there was lymph nodes larger than 10 mm in short axis. The results of single-photon emission computed tomography and computed tomography were correlated with pathology findings after surgery. Results: Single-photon emission computed tomography/computed tomography correctly identified six out of 19 cases involving hilar lymph nodes and one out of seven cases involving nodal metastases in the mediastinum. The sensitivity, specificity, positive predictive value, and negative predictive value for 99m Tc-sestamibi single-photon emission computed tomography/computed tomography in the hilum assessment were 31.6%, 95.5%, 85.7%, and 61.8%, respectively. The same values for the mediastinum were 14.3%, 97.1%, 50%, and 84.6%, respectively. For the hilar and mediastinal lymph nodes, chest tomography showed sensitivity values of 47.4% and 57.1%, specificity values of 95.5% and 91.2%, positive predictive values of 90% and 57.1% and negative predictive values of 67

Forensic considerations when dealing with incinerated human dental remains.

Science.gov (United States)

Reesu, Gowri Vijay; Augustine, Jeyaseelan; Urs, Aadithya B

2015-01-01

Establishing the human dental identification process relies upon sufficient post-mortem data being recovered to allow for a meaningful comparison with ante-mortem records of the deceased person. Teeth are the most indestructible components of the human body and are structurally unique in their composition. They possess the highest resistance to most environmental effects like fire, desiccation, decomposition and prolonged immersion. In most natural as well as man-made disasters, teeth may provide the only means of positive identification of an otherwise unrecognizable body. It is imperative that dental evidence should not be destroyed through erroneous handling until appropriate radiographs, photographs, or impressions can be fabricated. Proper methods of physical stabilization of incinerated human dental remains should be followed. The maintenance of integrity of extremely fragile structures is crucial to the successful confirmation of identity. In such situations, the forensic dentist must stabilise these teeth before the fragile remains are transported to the mortuary to ensure preservation of possibly vital identification evidence. Thus, while dealing with any incinerated dental remains, a systematic approach must be followed through each stage of evaluation of incinerated dental remains to prevent the loss of potential dental evidence. This paper presents a composite review of various studies on incinerated human dental remains and discusses their impact on the process of human identification and suggests a step by step approach. Copyright © 2014 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Dental image replacement on cone beam computed tomography with three-dimensional optical scanning of a dental cast, occlusal bite, or bite tray impression.

Science.gov (United States)

Kang, S-H; Lee, J-W; Lim, S-H; Kim, Y-H; Kim, M-K

2014-10-01

The goal of the present study was to compare the accuracy of dental image replacement on a cone beam computed tomography (CBCT) image using digital image data from three-dimensional (3D) optical scanning of a dental cast, occlusal bite, and bite tray impression. A Bracket Typodont dental model was used. CBCT of the dental model was performed and the data were converted to stereolithography (STL) format. Three experimental materials, a dental cast, occlusal bite, and bite tray impression, were optically scanned in 3D. STL files converted from the CBCT of the Typodont model and the 3D optical-scanned STL files of the study materials were image-registered. The error range of each methodology was measured and compared with a 3D optical scan of the Typodont. For the three materials, the smallest error observed was 0.099±0.114mm (mean error±standard deviation) for registering the 3D optical scan image of the dental cast onto the CBCT dental image. Although producing a dental cast can be laborious, the study results indicate that it is the preferred method. In addition, an occlusal bite is recommended when bite impression materials are used. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Molar incisor hypomineralisation (MIH): correlation with dental caries and dental fear.

Science.gov (United States)

Kosma, I; Kevrekidou, A; Boka, V; Arapostathis, K; Kotsanos, N

2016-04-01

This cross-sectional study was to investigate correlations between molar incisor hypomineralisation (MIH), dental caries and child dental fear. The subjects in the study were representative samples of 8 and 14 year old children from three Greek cities (total N = 2335). Dental examinations were performed by one calibrated examiner in classrooms, after the children had brushed their teeth, using an intraoral mirror and artificial room light supplemented by a penlight. All the children completed the children's fear survey schedule-dental subscale (CFSS-DS) questionnaire. MIH scores were recorded using EAPD criteria and dental caries experience by DMFS/dmfs index. Data were analysed with the Chi-squared (χ (2)), Mann-Whitney and Spearman's rank correlation coefficient tests. The mean DMFS in children with MIH (8-year olds: 1.60 ± 2.01, 14-year olds: 4.60 ± 4.41) was statistically significantly higher than children without MIH (8-year olds: 1.01 ± 1.78, 14-year olds: 3.46 ± 4.28) (p MIH had statistically significantly higher mean DMFS scores than children with mild or no MIH (p MIH status (p = 0.332). Caries experience was associated with the MIH status of the first permanent molars in both age groups (p MIH (26.5 ± 9.6) (p = 0.339), regardless of MIH severity. A positive association between MIH and dental caries was confirmed and a lack of association found between MIH and dental fear in Greek children.

Fluoride release and recharge abilities of contemporary fluoride-containing restorative materials and dental adhesives.

Science.gov (United States)

Dionysopoulos, Dimitrios; Koliniotou-Koumpia, Eugenia; Helvatzoglou-Antoniades, Maria; Kotsanos, Nikolaos

2013-01-01

The aim of this study was to evaluate the fluoride release of five fluoride-releasing restorative materials and three dental adhesives, before and after NaF solution treatment. Five restorative materials (Fuji IX GP, GC Corp.; Ketac N100, 3M ESPE; Dyract Extra, Dentsply; Beautifil II, Shofu Inc.; Wave, SDI) and three dental adhesives (Stae, SDI; Fluorobond II - Shofu Inc.; Prime & Bond NT, Dentsply) were investigated before and after NaF solution treatment. A fluoride ion-selective electrode was to measure fluoride concentrations. During the 86-day period before NaF solution treatment, Fuji IX GP released the highest amount of fluoride among the restorative materials while Prime & Bond NT was the highest among the dental adhesives. After NaF solution treatment, Fuji IX GP again ranked the highest in fluoride release among the restorative materials while Fluorobond II ranked the highest among dental adhesives. It was concluded that the compositions and setting mechanisms of fluoride-containing dental materials influenced their fluoride release and recharge abilities.

Caries dental en escolares del Distrito Federal Dental caries in school children in Mexico City

Directory of Open Access Journals (Sweden)

MARÍA ESTHER IRIGOYEN-CAMACHO

1997-03-01

Full Text Available Objetivo. Presentar las estimaciones de la prevalencia y la severidad de caries dental, así como las necesidades de tratamiento de la población escolar del Distrito Federal examinada en la encuesta de caries dental que se llevó a cabo en 1988 con la finalidad de obtener datos basales sobre caries en los escolares al inicio del Programa Nacional de Fluoruración de la Sal en México. Material y métodos. La población de estudio fue seleccionada empleando un marco muestral basado en el listado de las escuelas primarias y los jardines de niños registrados por la Secretaría de Educación Pública en 1988. En el examen de la cavidad bucal de los escolares se utilizaron los criterios diagnósticos señalados por la Organización Mundial de la Salud. Resultados. Un total de 4 475 escolares de 5 a 12 años de edad participaron en el estudio. La prevalencia de caries dental en la población alcanzó 90.5%. El índice de necesidades de tratamiento fue elevado (79.6%. El promedio de los índices de caries en los escolares de 12 años de edad fue CPOD= 4.42 (desviación estándar –DE– 3.2 y CPOS= 6.53 (DE 4.8. Conclusiones. Los resultados de la encuesta subrayan la pertinencia de un programa preventivo de amplia cobertura, como el de fluoruración de la sal. Además, muestran que se requiere elaborar estrategias para mejorar el acceso de la población escolar a los servicios odontológicos del sistema de salud en México.Objective. To estimate the prevalence and severity of dental caries and the dental treatment necessities of school children in Mexico City. The studied population was surveyed for dental caries in 1988 to obtain data necessary for the National Program of Salt Fluoridation in Mexico. Material and methods. The population was selected with a sample frame based on a list of Kindergardens and primary schools registered at the Ministry of Public Education in 1988. The oral cavity examination was based on diagnostic criteria marked by the

Oral health literacy in adult dental patients - A clinical study

OpenAIRE

Stein, Linda

2015-01-01

The papers II and III of this thesis are not available in Munin. Paper II: Stein, L., Bergdahl, M., Pettersen, K. S., Bergdahl, J.: “The association between oral health literacy and alexithymia: Implications for patient-clinician communication”. (Manuscript). Published version with title “Exploring the association between oral health literacy and alexithymia” available in Community Dental Health 2015, 32(3):143 - 147. Paper III: Stein, L., Bergdahl, M., Pettersen, K. S., Bergdahl...

A 4-m evolvable space telescope configured for NASA's HabEx Mission: the initial stage of LUVOIR

Science.gov (United States)

Lillie, Charles F.; MacEwen, Howard A.; Polidan, Ronald S.; Breckinridge, James B.

2017-09-01

Previous papers have described our concept for a large telescope that would be assembled in space in several stages (in different configurations) over a period of fifteen to 20 years. Spreading the telescope development, launch and operations cost over 20 years would minimize the impact on NASA's annual budget and drastically shorten the time between program start and "first light" for this space observatory. The first Stage of this Evolvable Space Telescope (EST) would consist of an instrument module located at the prime focus of three 4-meter hexagonal mirrors arranged in a semi-circle to form one-half of a 12-m segmented mirror. After several years three additional 4-m mirrors would be added to create a 12-m filled aperture. Later, twelve more 4-m mirrors will be added to this Stage 2 telescope to create a 20-m filled aperture space telescope. At each stage the telescope would have an unparalleled capability for UVOIR observations, and the results of these observations will guide the evolution of the telescope and its instruments. In this paper we describe our design concept for an initial configuration of our Evolvable Space Telescope that can meet the requirements of the 4-m version of the HabEx spacecraft currently under consideration by NASA's Habitable Exoplanet Science and Technology Definition Team. This "Stage Zero" configuration will have only one 4-m mirror segment with the same 30-m focal length and a prime focus coronagraph with normal incidence optics to minimize polarization effects. After assembly and checkout in cis-lunar space, the telescope would transfer to a Sun-Earth L2 halo orbit and obtain high sensitivity, high resolution, high contrast UVOIR observations that address the scientific objectives of the Habitable-Exoplanet Imaging Missions.

Quantification and visualization of alveolar bone resorption from 3D dental CT images

Energy Technology Data Exchange (ETDEWEB)

Nagao, Jiro; Mori, Kensaku; Kitasaka, Takayuki; Suenaga, Yasuhito [Nagoya University, Graduate School of Information Science, Nagoya (Japan); Yamada, Shohzoh; Naitoh, Munetaka [Aichi-Gakuin University, School of Dentistry, Nagoya (Japan)

2007-06-15

Purpose A computer aided diagnosis (CAD) system for quantifying and visualizing alveolar bone resorption caused by periodontitis was developed based on three-dimensional (3D) image processing of dental CT images. Methods The proposed system enables visualization and quantification of resorption of alveolar bone surrounding and between the roots of teeth. It has the following functions: (1) vertical measurement of the depth of resorption surrounding the tooth in 3D images, avoiding physical obstruction; (2) quantification of the amount of resorption in the furcation area; and (3) visualization of quantification results by pseudo-color maps, graphs, and motion pictures. The resorption measurement accuracy in the area surrounding teeth was evaluated by comparing with dentist's recognition on five real patient CT images, giving average absolute difference of 0.87 mm. An artificial image with mathematical truth was also used for measurement evaluation. Results The average absolute difference was 0.36 and 0.10 mm for surrounding and furcation areas, respectively. The system provides an intuitive presentation of the measurement results. Conclusion Computer aided diagnosis of 3D dental CT scans is feasible and the technique is a promising new tool for the quantitative evaluation of periodontal bone loss. (orig.)

Pediatric dental sedation: challenges and opportunities

OpenAIRE

Nelson, Travis; Xu,Zheng

2015-01-01

Travis M Nelson, Zheng Xu Department of Pediatric Dentistry, University of Washington, Seattle, WA, USA Abstract: High levels of dental caries, challenging child behavior, and parent expectations support a need for sedation in pediatric dentistry. This paper reviews modern developments in pediatric sedation with a focus on implementing techniques to enhance success and patient safety. In recent years, sedation for dental procedures has been implicated in a disproportionate number of cases th...

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

Science.gov (United States)

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Evaluation of radiation dose to patients in intraoral dental radiography using Monte Carlo Method

International Nuclear Information System (INIS)

Park, Il; Kim, Kyeong Ho; Oh, Seung Chul; Song, Ji Young

2016-01-01

The use of dental radiographic examinations is common although radiation dose resulting from the dental radiography is relatively small. Therefore, it is required to evaluate radiation dose from the dental radiography for radiation safety purpose. The objectives of the present study were to develop dosimetry method for intraoral dental radiography using a Monte Carlo method based radiation transport code and to calculate organ doses and effective doses of patients from different types of intraoral radiographies. Radiological properties of dental radiography equipment were characterized for the evaluation of patient radiation dose. The properties including x-ray energy spectrum were simulated using MCNP code. Organ doses and effective doses to patients were calculated by MCNP simulation with computational adult phantoms. At the typical equipment settings (60 kVp, 7 mA, and 0.12 sec), the entrance air kerma was 1.79 mGy and the measured half value layer was 1.82 mm. The half value layer calculated by MCNP simulation was well agreed with the measurement values. Effective doses from intraoral radiographies ranged from 1 μSv for maxilla premolar to 3 μSv for maxilla incisor. Oral cavity layer (23⁓82 μSv) and salivary glands (10⁓68 μSv) received relatively high radiation dose. Thyroid also received high radiation dose (3⁓47 μSv) for examinations. The developed dosimetry method and evaluated radiation doses in this study can be utilized for policy making, patient dose management, and development of low-dose equipment. In addition, this study can ultimately contribute to decrease radiation dose to patients for radiation safety

Evaluation of radiation dose to patients in intraoral dental radiography using Monte Carlo Method

Energy Technology Data Exchange (ETDEWEB)

Park, Il; Kim, Kyeong Ho; Oh, Seung Chul; Song, Ji Young [Dept. of Nuclear Engineering, Kyung Hee University, Yongin (Korea, Republic of)

2016-11-15

The use of dental radiographic examinations is common although radiation dose resulting from the dental radiography is relatively small. Therefore, it is required to evaluate radiation dose from the dental radiography for radiation safety purpose. The objectives of the present study were to develop dosimetry method for intraoral dental radiography using a Monte Carlo method based radiation transport code and to calculate organ doses and effective doses of patients from different types of intraoral radiographies. Radiological properties of dental radiography equipment were characterized for the evaluation of patient radiation dose. The properties including x-ray energy spectrum were simulated using MCNP code. Organ doses and effective doses to patients were calculated by MCNP simulation with computational adult phantoms. At the typical equipment settings (60 kVp, 7 mA, and 0.12 sec), the entrance air kerma was 1.79 mGy and the measured half value layer was 1.82 mm. The half value layer calculated by MCNP simulation was well agreed with the measurement values. Effective doses from intraoral radiographies ranged from 1 μSv for maxilla premolar to 3 μSv for maxilla incisor. Oral cavity layer (23⁓82 μSv) and salivary glands (10⁓68 μSv) received relatively high radiation dose. Thyroid also received high radiation dose (3⁓47 μSv) for examinations. The developed dosimetry method and evaluated radiation doses in this study can be utilized for policy making, patient dose management, and development of low-dose equipment. In addition, this study can ultimately contribute to decrease radiation dose to patients for radiation safety.

CMOS Flat-Panel CBCT for Dental Imaging

International Nuclear Information System (INIS)

Youn, Han Bean; Cho, Min Kook; Kim, Jee Young; Lee, Hyun Ji; Cho, Bong Hye; Heo, Sung Kyn

2009-01-01

Computed tomography (CT) has become one of the most frequently used imaging modalities for the preoperative evaluation of the jaw for dental implants. Sometimes dental Implant surgery needs histologic information of the regeneration of bone structure However conventional dental CT cannot serve these information because of its resolution limit. Hence we suggest dental CT which has micro scale resolution with high magnification factor. In these regards, We investigated micro dental CT with optimal magnification factor about our hardware system and evaluated along the 2D and 3D performance experimentally

Inhibition of the Quorum Sensing System (ComDE Pathway) by Aromatic 1,3-di-m-tolylurea (DMTU): Cariostatic Effect with Fluoride in Wistar Rats.

Science.gov (United States)

Kaur, Gurmeet; Balamurugan, P; Princy, S Adline

2017-01-01

Dental caries occurs as a result of dysbiosis among commensal and pathogenic bacteria leading to demineralization of enamel within a dental biofilm (plaque) as a consequence of lower pH in the oral cavity. In our previous study, we have reported 1,3-disubstituted ureas particularly, 1,3-di-m-tolylurea (DMTU) could inhibit the biofilm formation along with lower concentrations of fluoride (31.25 ppm) without affecting bacterial growth. In the present study, RT-qPCR analysis showed the target specific molecular mechanism of DMTU. In vivo treatment with DMTU, alone or in combination with fluoride, resulted in inhibition of caries (biofilm development of Streptococcus mutans ) using a Wistar rat model for dental caries. The histopathological analysis reported the development of lesions on dentine in infected subjects whereas the dentines of treated rodents were found to be intact and healthy. Reduction in inflammatory markers in rodents' blood and liver samples was observed when treated with DMTU. Collectively, data speculate that DMTU is an effective anti-biofilm and anti-inflammatory agent, which may improve the cariostatic properties of fluoride.

Inhibition of the Quorum Sensing System (ComDE Pathway by Aromatic 1,3-di-m-tolylurea (DMTU: Cariostatic Effect with Fluoride in Wistar Rats

Directory of Open Access Journals (Sweden)

Gurmeet Kaur

2017-07-01

Full Text Available Dental caries occurs as a result of dysbiosis among commensal and pathogenic bacteria leading to demineralization of enamel within a dental biofilm (plaque as a consequence of lower pH in the oral cavity. In our previous study, we have reported 1,3-disubstituted ureas particularly, 1,3-di-m-tolylurea (DMTU could inhibit the biofilm formation along with lower concentrations of fluoride (31.25 ppm without affecting bacterial growth. In the present study, RT-qPCR analysis showed the target specific molecular mechanism of DMTU. In vivo treatment with DMTU, alone or in combination with fluoride, resulted in inhibition of caries (biofilm development of Streptococcus mutans using a Wistar rat model for dental caries. The histopathological analysis reported the development of lesions on dentine in infected subjects whereas the dentines of treated rodents were found to be intact and healthy. Reduction in inflammatory markers in rodents' blood and liver samples was observed when treated with DMTU. Collectively, data speculate that DMTU is an effective anti-biofilm and anti-inflammatory agent, which may improve the cariostatic properties of fluoride.

Improved clinical staging of esophageal cancer with FDG-PET

International Nuclear Information System (INIS)

Kim, Young Hwan; Choi, Joon Young; Lee, Kyung Soo; Choi, Yong Soo; Lee, Eun Jeong; Chung, Hyun Woo; Lee, Su Jin; Lee, Kyung Han; Shim, Young Mog; Kim, Byung Tae

2004-01-01

Since preoperative staging in esophageal cancer is important in both therapy and prognosis, there had been many efforts to improve its accuracy. Recent studies indicate that whole body FDG-PET has high sensitivity in detection of metastasis in esophageal cancer. Therefore, we added FDG-PET to other conventional methods in staging esophageal cancer to evaluate the usefulness of this method. Subjects were 142 esophageal cancer patients (average 62.3±8.3 yrs) who received CT and PET just before operation. First, we compared N stage and M stage of the CT or PET with those of the post-operative results. Then we compared the stage according to the EUS (T stage) and CT (N and M stage) or EUS (T stage) and CT and PET (N and M stage) to that according to the post-operative results. Among 142 patients, surgical staging of 69 were N0 and 73 were N1. In M staging, 128 were M0 and 14 were M1. Sensitivity, specificity, and accuracy of N staging were 35.6%, 89.9%, 62.0% with CT and 58.9%, 71.0%, 64.7% with PET, respectively. In M staging, 14.3%, 96.9%, 88.7% with CT and 50.0%, 94.5%, 90.1% with PET, respectively. The concordances of [EUS+CT] and [EUS+CT+PET] with post-operative results were 41.2% and 54.6%, respectively and there was significant improvement of staging with additional PET scan (p<0.005). The concordance of [EUS+CT+PET] with post-operative result was significantly increased compared to that of [EUS+CT]. Thus, the addition of FDG-PET with other conventional methods may enable more accurate preoperative staging

Teeth and irradiation: dental care and treatment of osteoradionecrosis after irradiation in head and neck cancer

International Nuclear Information System (INIS)

Thariat, J.; Ortholan, C.; Thariat, J.; Darcourt, V.; Poissonnet, G.; Dassonville, O.; Marcy, P.Y.; Bozec, A.; Ortholan, C.; Santini, J.; Thariat, J.; Mones, E. de; Darcourt, V.; Poissonnet, G.; Dassonville, O.; Bozec, A.; Santini, J.; Marcy, P.Y.; Guevara, N.; Bensadoun, R.J.

2010-01-01

Pre-irradiation dental care depends on teeth health, fields and dose of irradiation, compliance to fluorides, cessation of tobacco and psycho-social cofactors. Dental care aims at preventing complications and preserving the quality of life (eating, speech, and aesthetics). The role of hyperbaric oxygen therapy for the prevention of osteoradionecrosis after teeth removal on the mandible in areas receiving 50 Gy or more is still controversial. Medical treatments may be sufficient for early stages of osteoradionecrosis (antibiotics, pain killers, non-steroidal anti-inflammatory drugs as well as clodronate, vitamin E, pentoxifylline). However, reconstructive surgery should not be delayed in advanced stages of osteoradionecrosis. New irradiation techniques are changing dose distributions and therefore require close collaboration between odonto-stomatologists and radiation oncologists to define the best dental care. (authors)

The developmental stages of the middle phalanx of the third finger (MP3): a sole indicator in assessing the skeletal maturity?

Science.gov (United States)

Madhu, S; Hegde, Amitha M; Munshi, A K

2003-01-01

Assessment of skeletal maturity is an integral part of interceptive diagnosis and treatment planning. The present day methods of skeletal maturity assessment like the hand-wrist radiographs or cervical vertebrae radiographs are expensive, require elaborate equipment and accounts for high radiation exposure, especially for growing children. The present study was thus undertaken to provide a simple and practical method of skeletal maturity assessment using the developmental stages of the middle phalanx of the third finger (MP3) as seen on an IOPA film taken using a standard dental x-ray machine. The results of the study showed that this simple method was highly reliable and could be used as an alternative method to assess the skeletal maturity of growing children.

Dental, Dental Hygiene, and Advanced Dental Students' Use, Knowledge, and Beliefs Regarding Tobacco Products.

Science.gov (United States)

Shearston, Jenni A; Shah, Krina; Cheng, Eric; Moosvi, Rizvan; Park, Su Hyun; Patel, Naiya; Spielman, Andrew I; Weitzman, Michael L

2017-11-01

Using cigarettes and alternative tobacco products (ATPs) is associated with negative oral health outcomes, and dental health professionals are poised to help patients quit. The aim of this study was to determine dental, dental hygiene, and advanced dental students' use, knowledge, and beliefs about cigarettes and ATPs, including perceptions about their education in tobacco dependence treatment and counseling experience. All 1,783 students enrolled in the dental, dental hygiene, and postdoctoral dental programs at the New York University College of Dentistry were invited to participate in the survey in 2016. A total of 708 students at least partially completed the survey, for a response rate of 39.7%. In the results, 146 of the students (20.1%) reported ever using cigarettes, while 253 (35.7%) reported ever using any ATP. Regarding tobacco use intervention, the students reported they had not received enough training on ATPs, were neutral about cigarettes, and were somewhat confident and not so confident counseling a cigarette smoker or ATP user, respectively. By their fourth year, 77.8% of the dental students reported they had counseled someone to stop smoking cigarettes, but only 40.7% had counseled someone to stop using ATPs. Overall, all groups of students reported feeling more confident and had received more education on interventions for cigarettes than for ATPs (ptobacco and did not perceive they had received enough training on intervening with patients on use of cigarettes and ATPs. These findings call for a revised tobacco education curriculum for dental, dental hygiene, and advanced dental students, focused on building knowledge and confidence for promoting tobacco dependence treatment.

Error in assessing the absorbed dose from the EPR signal from dental enamel

International Nuclear Information System (INIS)

Kleshchenko, E.D.; Kushnereva, K.K.

1997-01-01

Dose measurements from EPR signals from dental enamel were analyzed in a random sampling of 100 teeth extracted in liquidators of the Chernobyl accident aftermath and the EPR spectra of dental enamel of 80 intact teeth from children studied. The mean square deviation of enamel sensitivity to ionizing radiation in some teeth is approximately 0.3 of the mean sensitivity value. The variability of the nature EPR spectrum of dental enamel limits in principle the lower threshold of EPR-measured 60 mGy doses. When assessing the individual absorbed doses from the EPR signal from dental enamel without additional exposure it is necessary to bear in mind the extra error of approximately 6-% at a confidence probability P=0.95 caused by the variability of enamel sensitivity to radiation in some teeth. This additional error may be ruled out by graduated additional exposure of the examined enamel samples

42 CFR Appendix G to Part 75 - Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography G Appendix G to Part 75 Public Health PUBLIC HEALTH SERVICE...—Standards for Licensing Dental Hygienists and Dental Assistants in Dental Radiography The following section...

Lonizing radiation regulations and the dental practitioner: 3. Quality assurance in dental radiography.