WorldWideScience

Sample records for m-11 copper crusher

  1. Rollerjaw Rock Crusher

    Science.gov (United States)

    Peters, Gregory; Brown, Kyle; Fuerstenau, Stephen

    2009-01-01

    The rollerjaw rock crusher melds the concepts of jaw crushing and roll crushing long employed in the mining and rock-crushing industries. Rollerjaw rock crushers have been proposed for inclusion in geological exploration missions on Mars, where they would be used to pulverize rock samples into powders in the tens of micrometer particle size range required for analysis by scientific instruments.

  2. Material Flow in Jaw Crusher

    Institute of Scientific and Technical Information of China (English)

    CAO Jinxi; RONG Xingfu; YANG Shichun

    2006-01-01

    Jaw crusher is a kind of machine widely used in mining and aggregates industry, but it still has some shortcomings, such as liners wear, terrible power draw etc. The lack of research on material flow strongly limits the design improvement. The size reduction of the jaw crusher relies on the moving jaw movement that is a kind of complicated swing. Based on the movement analysis of the moving jaw and the single particle breakage characters, the material flow is analyzed. The measure of the breakage force is carried out. Material flow analysis is partly confirmed by the experimental results and some new information is also learned from the crushing force distribution. The job on the material flow will be helpful to the jaw crusher design improvement.

  3. Estimation on separation efficiency of aluminum from base-cap of spent fluorescent lamp in hammer crusher unit.

    Science.gov (United States)

    Rhee, Seung-Whee

    2017-09-01

    In order to separate aluminum from the base-cap of spent fluorescent lamp (SFL), the separation efficiency of hammer crusher unit is estimated by introducing a binary separation theory. The base-cap of SFL is composed by glass fragment, binder, ferrous metal, copper and aluminum. The hammer crusher unit to recover aluminum from the base-cap consists of 3stages of hammer crusher, magnetic separator and vibrating screen. The optimal conditions of rotating speed and operating time in the hammer crusher unit are decided at each stage. At the optimal conditions, the aluminum yield and the separation efficiency of hammer crusher unit are estimated by applying a sequential binary separation theory at each stage. And the separation efficiency between hammer crusher unit and roll crush system is compared to show the performance of aluminum recovery from the base-cap of SFL. Since the separation efficiency can be increased to 99% at stage 3, from the experimental results, it is found that aluminum from the base-cap can be sufficiently recovered by the hammer crusher unit. Copyright © 2017. Published by Elsevier Ltd.

  4. Portable crushers resolve frozen coal problem

    Energy Technology Data Exchange (ETDEWEB)

    Massa, P.; Fuller, L.; Buckley, T. [Public Services of Indiana (PSI), IN (United States)

    2001-11-01

    In 2002, PSI contracted XMS Equipment to design a pair of modularized and portable crushers to overcome the problem of frozen coal during winter months. The rollers of the crusher can be removed during non-winter months, reducing wear. The article describes the design, construction and installation of the system which takes care of the frozen coal in the hoppers and the coal feed systems in the 1000 W Cayuga plant and overcomes the problem of coal freezing in the reclaim hoppers and the open coal storage areas. 4 figs.

  5. Effective utilization of crusher dust in sustainable concrete

    Directory of Open Access Journals (Sweden)

    Shubham Kothari

    2016-02-01

    Full Text Available In the today’s era with the growing expenses, abundant waste material is generated through processing units of stone industry, there is a need to increase awareness by utilizing economical substitutes to solve the problem of these waste. The utilization of crusher dust as fine aggregate for concrete has achieved more attention in recent year due to scary of natural river sand. Today continues efforts are made towards finding the substitute of natural resources. Research is therefore needed to least the environmental damages and to obtain sustainable construction. This review deals with how crusher dust would be utilized to deliver new items as additive for sustainable concrete. This study professed latest research on using crusher dust as replacement of sand in concrete. Effect on fresh and hardened properties of concrete with crusher dust is discussed in this paper.

  6. CONSTRUCTION FEATURES AND EFFICIENCY OF VERTICAL IMPACT CRUSHERS

    Directory of Open Access Journals (Sweden)

    Branko Salopek

    2002-12-01

    Full Text Available In the technical stone market, the most demanded grain size classes are 4/8, 2/4, -4, -2 mm, which weight portion being predominant in aggregates for production of concrete and asphalt. However, the production of these classes is not always simple. In adition to quantity requirements, the specific grain size distribution and grain shape of stone aggregate, as well as a minimal portion of the particles -0,09 mm are regurarly demanded. Until about ten years ago, impact and hammer crushers were most often used for the production of the above mentioned classes, while nowdays vertical impact crushers are being used with increasing frequency for this purpose. Compared to the first-mentioned crushers, vertical impact crushers represent a certain technological progress manifested primarily in a greater content of cubic shaped graines in output material and reduced wear of crusher lining and impact elements. The paper descibes the basic construction features and the operating principle of vertical impact crusher and analyzes their efficiency (grain size distribution of the crushed product, content of favourably shaped grains, filler content as a function of the particular technological parameters (the paper is published in Croatian.

  7. Multi-object optimization design for differential and grading toothed roll crusher using a genetic algorithm

    Institute of Scientific and Technical Information of China (English)

    ZHAO La-la; WANG Zhong-bin; ZANG Feng

    2008-01-01

    Our differential and grading toothed roll crusher blends the advantages of a toothed roll crusher and a jaw crusher and possesses characteristics of great crushing, high breaking efficiency, multi-sieving and has, for the moment, made up for the shortcomings of the toothed roll crusher. The moving jaw of the crusher is a crank-rocker mechanism. For optimizing the dynamic performance and improving the cracking capability of the crusher, a mathematical model was established to optimize the transmission angle γ and to minimize the travel characteristic value m of the moving jaw. Genetic algorithm is used to optimize the crusher crank-rocker mechanism for multi-object design and an optimum result is obtained. According to the implementation, it is shown that the performance of the crusher and the cracking capability of the moving jaw have been improved.

  8. Prediction of Cone Crusher Performance Considering Liner Wear

    Directory of Open Access Journals (Sweden)

    Yanjun Ma

    2016-12-01

    Full Text Available Cone crushers are used in the aggregates and mining industries to crush rock material. The pressure on cone crusher liners is the key factor that influences the hydraulic pressure, power draw and liner wear. In order to dynamically analyze and calculate cone crusher performance along with liner wear, a series of experiments are performed to obtain the crushed rock material samples from a crushing plant at different time intervals. In this study, piston die tests are carried out and a model relating compression coefficient, compression ratio and particle size distribution to a corresponding pressure is presented. On this basis, a new wear prediction model is proposed combining the empirical model for predicting liner wear with time parameter. A simple and practical model, based on the wear model and interparticle breakage, is presented for calculating compression ratio of each crushing zone along with liner wear. Furthermore, the size distribution of the product is calculated based on existing size reduction process model. A method of analysis of product size distribution and shape in the crushing process considering liner wear is proposed. Finally, the validity of the wear model is verified via testing. The result shows that there is a significant improvement of the prediction of cone crusher performance considering liner wear as compared to the previous model.

  9. Computer Simulation Methods for Crushing Process in an Jaw Crusher

    Science.gov (United States)

    Il'ich Beloglazov, Ilia; Andreevich Ikonnikov, Dmitrii

    2016-08-01

    One of the trends at modern mining enterprises is the application of combined systems for extraction and transportation of the rock mass. Given technology involves the use the conveyor lines as a continuous link of combined technology. The application of a conveyor transport provides significant reduction of costs for energy resources, increase in labor productivity and process automation. However, the use of a conveyor transport provides for certain requirements for the quality of transported material. The maximum size of the rock mass pieces is one of the basic parameters for it. The crushing plants applies as a coarse crushing followed by crushing the material to the maximum size of piece which possible to use for conveyor transport. It is often represented by jaw crushers. Modelling of crushing process in jaw crushers allows to maximally optimize workflow and increase efficiency of the equipment at the further transportation and processing of rocks. We studied the interaction between walls of the jaw crusher and bulk material by using discrete element method (DEM) in this paper. The article examines the process of modeling by stages. It includes design of the crusher construction in solid and surface modeling system. Modelling of the crushing process based on the experimental data received via the crushing unit BOYD. The process of destruction and particle size distribution in the study was done. Analysis of research results shows a comparability of actual experiment and modeling process.

  10. Standard test method for jaw crusher gouging abrasion test

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1997-01-01

    1.1 This test method covers a laboratory procedure to determine the relative gouging abrasion resistance of materials. Materials homogeneous in structure and properties are the most appropriate test materials; however, surface-treated and composite materials can also be tested. The test involves a small laboratory jaw crusher that crushes presized hard rock materials, such as a hard morainal gravel, or some other crushable substance. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See 8.1 on Safety Precautions.)

  11. Amalgams of Rank 2 and Characteristic 3 Involving M11

    Institute of Scientific and Technical Information of China (English)

    黄建华; 李慧陵

    1994-01-01

    In this paper we investigate the amalgams (M11,X) of rank 2 and characteristic 3,where X is a group of Lie type of rank 1 or permutation group of low rank,and give a characterization of the 3 local subgroups of the finite sporadic groups Co3 of Ly and Suz.

  12. Performance Evaluation Test of the Orbit Screen Model 68A and the Komplet Model 48-25 Rock Crusher

    Science.gov (United States)

    2008-08-01

    screen and on a Komplet Italia , s.r.l., Model 48-25 rock crusher. The test was conducted during August 2008 at a U.S. Army test site in central... Italia , s.r.l., Model 48-25 Rock Crusher.......................................................... 2 2.3 ASV SR-80 Rubber-Tracked Skid-Steer Loader... Italia , s.r.l., Rock Crusher Testing ......................................................................... 16 5.1 Crushing Performance Test

  13. Investigation of the effects of type of crusher on coarse aggregates shape properties using three-dimensional Laser Scanning Technique

    CSIR Research Space (South Africa)

    Komba, Julius J

    2016-07-01

    Full Text Available are commonly grouped into two main categories. These categories are compression-type and impact crushers (Collis and Fox, 1985). Compression-type crushers, which include Jaw, Gyratory and Cone crushers, compress a rock until it breaks. On the other Geo-China... aggregate particles were scanned for the four types of crushers. Geo-China 2016 GSP 266 126 © ASCE Other standard tests performed on the aggregate samples included sieve analysis, Bulk Relative Density, Apparent Relative Density and Water Absorption...

  14. Load and wear experiments on the impact hammer of a vertical shaft impact crusher

    Science.gov (United States)

    Yang, J. H.; Fang, H. Y.; Luo, M.

    2015-12-01

    Impact hammers are important components of impact crushers, and are often shortlived due to the high-impact nature of their use. Wear-resistant alloys are welded to the surface of impact hammers to prolong their service life. In this paper, a simulation model of the rotor and impact hammers in impact crushers was designed to utilize the Discrete Element Method (DEM). The wear-resistant alloy on each impact hammer was divided into twenty-two action regions. The load distribution on each alloy block is affected by the structural and manufacturing parameters of the impact crusher. The wear distribution of the impact hammer was measured by shape morphology according to relative impact crushers. The results demonstrated that the real measurements of wear distribution on the impact hammer were similar to simulated load distribution measurements on the same surface. The study of load distribution of impact hammers by DEM established a theoretical foundation on which to base the optimal design of impact crushers.

  15. IMPACT OF ROCK HARDNESS ON FRAGMENTATION BY HYDRAULIC HAMMER AND CRUSHING IN JAW CRUSHER

    Directory of Open Access Journals (Sweden)

    Trpimir Kujundžić

    2008-12-01

    Full Text Available The physical and mechanical characteristics of intact rocks depend on the way of their formation, sustained deformations and the process of wearing a specific rock has been exposed to. These characteristics have a rather high influence on the technological process of extraction and dressing of mineral raw materials. However, the mechanical characteristics of rocks due to use of explosives for their extraction in the open pit have a more significant impact. The rock blocks extracted by blasting which are larger than the opening of the primary crusher are usually fragmented by hydraulic hammer. The paper presents the results of the testing of impact of rock hardness on fragmentation of rocks by means of hydraulic hammer and during crushing in jaw crusher. The testing was carried out on the rock samples from five quarries. According to the obtained results the hardness has a considerably larger impact on the fragmentation energy by hydraulic hammer than on the crushing energy in jaw crusher.

  16. Morbidity Profile of Stone Crusher Workers with Special Reference to Respiratory Morbidity: A Cross Sectional Study

    Directory of Open Access Journals (Sweden)

    Narkhede Vinod, Likhar Swarna, Mishra Mahesh K

    2012-09-01

    Full Text Available Background: The occupational environment at the stone crushing sites poses a potential health hazard to the workers. Exposure to heavy dust concentration from stone crushers, may produce several diseases. Methods: The present study was aimed to assess the morbidity profile of workers working in stone crusher industry. A cross-sectional study was carried out among the workers of the stone crushers located in Ratua at a distance of 23 km to the north of Bhopal city. The total workers working in the crusher are 287.Using interview technique as a tool for data collection demographic and occupational details of the subjects were recorded on the predesigned proforma which included questions regarding age, sex, educational status, socio-economic status, duration of employment and symptoms. The Peak Expiratory Flow Rate (PEFR of the subject was measured using Peak flow meter/spirometer. Results: It was observed that in study population 62.72% were suffering from musculoskeletal problems followed by 31.36% subjects were having generalized weakness.29.96% subjects had breathing problem. Respiratory problems were higher among the subjects having duration of occupation more than 5 years than the subjects having duration of occupation less than 5 years (p<0.003. Conclusion: The present study concluded that the workers in the stone crushing industry are exposed to stone dust which leads to various morbidities especially musculoskeletal problems and respiratory problems. The respiratory problems are significantly associated with duration of exposure and decreased PEFR.

  17. Wear characterization and modelling of Mn−steel liners used in rock crushers

    Directory of Open Access Journals (Sweden)

    Rahul Sinha

    2016-09-01

    Full Text Available There are several techniques such as surface profilometry, advanced technique of electron microscopy and optical methods which have been used by researchers to determine the measurement of wear and it is found useful to understand the surface geometry of the material. In mining industries, wear is acute in rock crusher. This work explores the characterization of wear observed on the surface of liner material of roll crusher crushing coal. Wear characterization like ploughing, scratching, cavities has been observed on the surface of liners. To correlate wear characterization due to abrasion on roll crusher liner wear, experiments have been performed. To perform abrasive wear test, pin-shaped sample of liner material has been developed for the purpose of testing. The abrasive wear experiment was conducted using pin-on-disc tribometer. During the investigation, experiments based on full factorial design adopted from statistical modelling software. In this methodology, the input parameters like load, sliding distance, hardness of coal, hardness of liner material are taken into consideration, and weight loss was considered as the output response. The influence of each input parameters were examined to understand its effect for weight loss. The regression equation obtained from analysis of variance table was used for the prediction of weight loss. The regression equation developed was validated with the experimental results. The percentage error was observed less than ±10%.

  18. Air cleaning performance of a new environmentally controlled primary crusher operator booth.

    Science.gov (United States)

    Organiscak, J A; Cecala, A B; Zimmer, J A; Holen, B; Baregi, J R

    2016-02-01

    The National Institute for Occupational Safety and Health (NIOSH) cooperated with 3M Company in the design and testing of a new environmentally controlled primary crusher operator booth at the company's Wausau granite quarry near Wausau, WI. This quarry had an older crusher booth without a central heating, ventilation and air conditioning (HVAC) system, and without an air filtration and pressurization system. A new replacement operator booth was designed and installed by 3M based on design considerations from past NIOSH research on enclosed cab filtration systems. NIOSH conducted pre-testing of the old booth and post-testing of the new booth to assess the new filtration and pressurization system's effectiveness in controlling airborne dusts and particulates. The booth's dust and particulate control effectiveness is described by its protection factor, expressed as a ratio of the outside to inside concentrations measured during testing. Results indicate that the old booth provided negligible airborne respirable dust protection and low particulate protection from the outside environment. The newly installed booth provided average respirable dust protection factors from 2 to 25 over five shifts of dust sampling with occasional worker ingress and egress from the booth, allowing some unfiltered contaminants to enter the enclosure. Shorter-term particle count testing outside and inside the booth under near-steady-state conditions, with no workers entering or exiting the booth, resulted in protection factors from 35 to 127 on 0.3- to 1.0-μm respirable size particulates under various HVAC airflow operating conditions.

  19. Diagnosis of the rock crushing modes to increase the efficiency of one-roll crusher operation

    Science.gov (United States)

    Nikitin, A. G.; Laktionov, S. A.; Medvedeva, K. S.

    2017-09-01

    In the paper the hypotheses of destruction of brittle materials are given, as well as the analysis of energy costs for crushing. The methods of crushing are considered and a comparative analysis of their energy capacity and quality of the product is carried out. The parameters of the crushing process are determined from the point of view of their productivity and, accordingly, their energy efficiency. It is shown that the process of crushing in the one-roll crushers is due to the frictional forces acting between the surfaces of the roll and a piece of the crushed material, and also between the piece and the immovable jaw. The comparison of initial sizes of the crushed pieces in the crushes with the vertical and inclined surfaces of immovable jaw, which shows that with the increase in the bend angle of the immovable jaw the degree of crushing increases. Based on the analysis of forces acting on the crushed material in the one-roll crusher with the inclined surface of the jaw, the calculation of maximal possible value of the bend angle of the immovable jaw is performed.

  20. The Level of Power Quality Measurement and Evaluation in A Stone Crusher Plant

    Directory of Open Access Journals (Sweden)

    Mustafa ŞEKKELİ

    2009-03-01

    Full Text Available Both electric utilities and end users of electric power are becoming increasingly concerned about the quality of electric power. Quality of electrical energy in the electrical system that is requested continuous power (uninterrupted power, constant frequency and with constant amplitude can be explained by sinusoidal voltage. Deformation of voltage in the form of sinusoidal waveform is explained as a harmonic. Harmonics are most important factors in decreasing quality of energy in the electrical system. In industrial plants, existence of harmocins and voltage drop, causes serious problems both in plant and network. This problem affects the cost. In this study, a power quality measurements are carried out in stone crusher plant. Harmonics and voltage drop has been measured and evaluated with the power analyzer. In the power quality measurements, harmonic level of the plant is not so bad. However, it is recommended that compensation system with harmonic elimination can be established in plant.

  1. The synchro crusher: a new type of impact?; Le ''synchro-concasseur'': du nouveau dans l'impact?

    Energy Technology Data Exchange (ETDEWEB)

    Van der Zanden, H.; Valenchon, P.

    1999-10-01

    The seminar organized by 'Quarry Management' on the occasion of the Hillhead 99 workshop provided the Dutch company VanderZanden with the opportunity to present its research work on the development of a new concept of crushing called 'SynchroCrusher'. Its principle uses the 'relative movement' linked with 'synchronization'. Each particle is uniformly and precisely crushed by a double impact, the second impact being only generated by the residual (free) energy and occurring at a greater speed. An optimal direct impact is obtained thanks to a perfect control of the impact angle (between 75 and 85 deg.) and of the particle trajectories with no interference between particles. This system allows to reduce both the energy consumption and the wear of crushers. This paper presents the concept of the SynchroCrusher, its comparison with other classical impact crushers and the R and D work carried out to analyze the movement of particles, the capacity of the crusher with respect to the orientation of blades, the directional changes of particles inside the crusher and the synchronization of particle trajectories. (J.S.)

  2. 西蒙斯圆锥破碎机故障分析%Fault Analysis of SYMONS Cone Crusher

    Institute of Scientific and Technical Information of China (English)

    季利平

    2013-01-01

    西蒙斯圆锥破碎机在实际生产中,因为制造、安装及检修等原因,经常发生一些故障。通过对破碎机工作原理、运动规律及受力情况的分析,解决囤料、主轴断裂等故障,为安全生产提供有力保障。%Symons cone crusher in manufacturing , installation and maintenance at practical production is happened some fault often .Through the working principle of the crusher , the law of movement and force analysis , the hoard material , main shaft fracture failure is solved , provide powerful guarantee for safe production .

  3. Complete genome sequence of Thermosphaera aggregans type strain (M11TLT)

    Energy Technology Data Exchange (ETDEWEB)

    Spring, Stefan [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rachel, Dr. Reinhard [Universitat Regensburg, Regensburg, Germany; Lapidus, Alla L. [U.S. Department of Energy, Joint Genome Institute; Davenport, Karen W. [Los Alamos National Laboratory (LANL); Tice, Hope [U.S. Department of Energy, Joint Genome Institute; Copeland, A [U.S. Department of Energy, Joint Genome Institute; Cheng, Jan-Fang [U.S. Department of Energy, Joint Genome Institute; Lucas, Susan [U.S. Department of Energy, Joint Genome Institute; Nolan, Matt [U.S. Department of Energy, Joint Genome Institute; Bruce, David [U.S. Department of Energy, Joint Genome Institute; Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [U.S. Department of Energy, Joint Genome Institute; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Ovchinnikova, Galina [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [U.S. Department of Energy, Joint Genome Institute; Palaniappan, Krishna [U.S. Department of Energy, Joint Genome Institute; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Detter, J. Chris [U.S. Department of Energy, Joint Genome Institute; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Heimerl, Dr. Thomas [Universitat Regensburg, Regensburg, Germany; Weikl, Fabian [University of Regensburg, Archaeenzentrum, Regensburg, Germany; Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Bristow, James [U.S. Department of Energy, Joint Genome Institute; Eisen, Jonathan [U.S. Department of Energy, Joint Genome Institute; Markowitz, Victor [U.S. Department of Energy, Joint Genome Institute; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [U.S. Department of Energy, Joint Genome Institute; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany

    2010-01-01

    Thermosphaera aggregans Huber et al. 1998 is the type species of the genus Thermosphaera, which comprises at the time of writing only one species. This species represents archaea with a hyperthermophilic, heterotrophic, strictly anaerobic and fermentative phenotype. The type strain M11TLT was isolated from a water-sediment sample of a hot terrestrial spring (Obsidian Pool, Yellowstone National Park, Wyoming). Here we describe the features of this organism, together with the complete genome sequence and annotation. The 1,316,595 bp long single replicon genome with its 1,410 protein-coding and 47 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  4. Influence of olive ripening degree and crusher typology on chemical and sensory characteristics of Correggiolo virgin olive oil.

    Science.gov (United States)

    Morrone, Lucia; Pupillo, Sabrina; Neri, Luisa; Bertazza, Giampaolo; Magli, Massimiliano; Rotondi, Annalisa

    2017-03-01

    In this study, two types of crusher, hammer and blade, were used to produce olive oils from cv. Correggiolo olives at four stages of ripeness, to analyse the effect of these two factors on oil quality indices (free acidity, peroxide value, UV absorption), on phenolic compounds content and sensory profiles. Differences in chemical and sensory data were analysed by two-way ANOVA. Ripeness exerted a stronger influence than the crushing equipment on quality indices, phenolic content and sensory evaluation; moreover the statistical significance of interaction between the factors considered suggests that they are intertwined. Differences in the texture of olive pastes obtained by squashing and crushing were clearly evident at the first stage of ripeness via observation with a scanning electron microscope. The stronger mechanical action of the hammer crusher also produced smaller pit fragments compared to the blade crusher, as shown by particle size analysis of the kernels fragments. Knowledge about the interaction between ripening and crushing will allow olive oil producers to pursue a product of the quality most suitable for a particular type of consumer. For example, bitterness and pungency, characters recently connected with health effects because sensory markers of extra virgin olive oil (EVOO) polyphenols, do not have a great sensory appeal for most consumers; however, there is a niche of gourmet estimators interested in these peculiar flavours and ready to pay a premium price for them. The producer will be able to customise the EVOO by modulating its chemical and sensory characteristics, especially the phenolic fraction, thus addressing the needs of consumers with different tastes. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  5. 生活垃圾破碎机的开发%Development of a Household Refuse Crusher Machine

    Institute of Scientific and Technical Information of China (English)

    王振海; 傅磊; 艾洪超; 何佩珍; 孙希财

    2016-01-01

    破碎机作为生活垃圾处理线的一个重要装备,其作用是将大件垃圾破碎成所需尺寸,便于运输、焚烧、制肥、造粒等后续工艺。以往公司的固废处理线上的破碎机都采用进口产品,不仅费用高,供货周期长,且受制于人。经过充分的市场调研和全面的技术论证,成功开发出了具有独立知识产权的旋转剪切式双轴破碎机,产品获多项中国实用新型专利。%Crusher machine,as an important equipment in domestic refuse treatment line,is to break large pieces of gar-bages into required sizes for transport,incineration,fertilizer,granulation and other follow-up processes.Formersolid waste treatment line crushers are imported equipment,which feauture high cost,long delivery cycle,and controlled by others. Therefore,after adequate market research and comprehensive technical demonstration,researchers finally suc-ceeded in developing a Tianjin Baili Sun Environmental Protection Equipment Co.,Ltd.rotary shear type biaxial crusher with independent intellectual property rights,which have been granted a number of utility model patents in China.

  6. Friction and Wear Reduction of Eccentric Journal Bearing Made of Sn-Based Babbitt for Ore Cone Crusher

    OpenAIRE

    Auezhan Amanov; Byungmin Ahn; Moon Gu Lee; Yongho Jeon; Young-Sik Pyun

    2016-01-01

    An anti-friction Babbitt alloy-coated bearing made by a casting process is a journal bearing, which is used in an ore cone crusher eccentric. The main purpose of the Babbitt coated eccentric is to provide a low friction to support and guide a rotating shaft. Despite the fact that the Babbitt-coated eccentric offers a low friction coefficient and can be operated without a continuous supply of lubricant, it suffers from mining environments and short service life. In this study, an ultrasonic na...

  7. The Detached Eclipsing Binary KV29 and the Age of the Open Cluster M11

    CERN Document Server

    Bavarsad, Ernest A; Shetrone, Matthew D; Orosz, Jerome A

    2016-01-01

    We present an extensive set of photometry and radial velocities for the detached eclipsing binary KV 29 in the intermediate-aged open cluster M11 (NGC 6705). Spectroscopy shows that the system is double-lined and all available evidence (proper motion, photometry, and position on the CMD) indicates it is a member of the cluster. We find the period of the binary to be $4.64276\\pm0.00001$ days. We find masses $3.604^{+0.002}_{-0.011}M_\\odot$ and $1.837^{+0.001}_{-0.006}M_\\odot$, and radii $5.392^{+0.018}_{-0.035}R_\\odot$ and $1.656^{+0.007}_{-0.044}R_\\odot$ for the primary and secondary stars, respectively. Because the primary star in the binary is rapidly evolving and is brighter than the cluster turnoff in a color-magnitude diagram, the measurement of its radius leads to a strong constraint on the cluster age. We find the age of M11 to be $222^{+2}_{-3}\\pm15$ Myr, where the quoted uncertainties come from statistical errors in the calculated masses and radii, and systematic uncertainties due to the ambiguity of...

  8. Strömgren-Hβ Photometry of the Galactic Open Cluster M11

    Science.gov (United States)

    Beaver, John; Briley, M. M.; Kaltcheva, N.; Conger, C.; Piehl, D.

    2013-01-01

    We present uvbyβ CCD photometry of the central region of the rich Galactic open cluster M11. Our study utilizes photometric data obtained with the 0.9-m WIYN telescope at the Kitt Peak National Observatory during two observing runs in 2007 and 2008. We match stars by position to identified stars in the WEBDA catalog and we compare our V and b-y observations to two previously-published data sets of V and B-V observations. From our photometry we identify nearly 250 stars earlier than spectral type A0 and we use them to derive a metallicity-independent average color excess and distance for the cluster. Our magnitude limit of V=17 allows us to reach late G spectral type and obtain accurate fits to the ZAMS in order to estimate the age of the cluster. Acknowledgements: this work was supported by NSF grants AST-0708950 and AST-1135760.

  9. Complete genome sequence of Thermosphaera aggregans type strain (M11TL).

    Science.gov (United States)

    Spring, Stefan; Rachel, Reinhard; Lapidus, Alla; Davenport, Karen; Tice, Hope; Copeland, Alex; Cheng, Jan-Fang; Lucas, Susan; Chen, Feng; Nolan, Matt; Bruce, David; Goodwin, Lynne; Pitluck, Sam; Ivanova, Natalia; Mavromatis, Konstantinos; Ovchinnikova, Galina; Pati, Amrita; Chen, Amy; Palaniappan, Krishna; Land, Miriam; Hauser, Loren; Chang, Yun-Juan; Jeffries, Cynthia C; Brettin, Thomas; Detter, John C; Tapia, Roxanne; Han, Cliff; Heimerl, Thomas; Weikl, Fabian; Brambilla, Evelyne; Göker, Markus; Bristow, James; Eisen, Jonathan A; Markowitz, Victor; Hugenholtz, Philip; Kyrpides, Nikos C; Klenk, Hans-Peter

    2010-06-15

    Thermosphaera aggregans Huber et al. 1998 is the type species of the genus Thermosphaera, which comprises at the time of writing only one species. This species represents archaea with a hyperthermophilic, heterotrophic, strictly anaerobic and fermentative phenotype. The type strain M11TL(T) was isolated from a water-sediment sample of a hot terrestrial spring (Obsidian Pool, Yellowstone National Park, Wyoming). Here we describe the features of this organism, together with the complete genome sequence and annotation. The 1,316,595 bp long single replicon genome with its 1,410 protein-coding and 47 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  10. Structure and stellar content analysis of the open cluster M11 with 2MASS photometry

    CERN Document Server

    Santos, J F C; Bica, E

    2005-01-01

    An overall analysis of the structure and stellar content of M11 is presented, thanks to the wide-angle 2MASS spatial coverage. We derive photometric and structural parameters and discuss the spatial dependance of the luminosity and mass functions. Photometric parameters basically agree with previous ones mostly based on the optical. We obtained a core radius of 1.23pc and a tidal radius of 29pc. In particular, the cluster is populous enough so that the tidal radius could be obtained by fitting the three-parameter King profile to the radial distribution of stars. We analyzed the spatial distribution of mass functions, finding that the the slope changes from -0.73 in the core to +2.88 in the outer halo. The spatial distribution of mass function slopes derived from 2MASS agrees with that derived from optical CCD data, which further confirms the reliability of 2MASS data for future analyses of this kind at comparable observational limits. We detect mass segregation up to distances from the center of ~20arcmin. We...

  11. PREFACE: EmerQuM 11: Emergent Quantum Mechanics 2011 (Heinz von Foerster Congress)

    Science.gov (United States)

    Grössing, Gerhard

    2012-05-01

    These proceedings comprise the plenary lectures and poster contributions of the 'Heinz von Foerster Conference 2011' on Emergent Quantum Mechanics (EmerQuM11), which was held at the University of Vienna, 11-13 November 2011. With the 5th International Heinz von Foerster Conference convened at the occasion of von Foerster's 100th birthday, the organizers opted for a twin conference to take place at the Large and Small Ceremonial Halls of the University's main building, respectively. The overall topic was chosen as 'Self-Organization and Emergence', a topic to which von Foerster was an early contributor. While the first conference ('Self-Organization and Emergence in Nature and Society') addressed a more general audience, the second one ('Emergent Quantum Mechanics') was intended as a specialist meeting with a contemporary topic that could both serve as an illustration of von Foerster's intellectual heritage and, more generally, point towards future directions in physics. We thus intended to bring together many of those physicists who are interested in or are working on attempts to understand quantum mechanics as emerging from a suitable classical (or, more generally, deeper level) physics. EmerQuM11 was organized by the Austrian Institute for Nonlinear Studies (AINS), with essential support from the Wiener Institute for Social Science Documentation and Methodology (WISDOM), the Department of Contemporary History at the University of Vienna, and the Heinz von Foerster-Gesellschaft. There were a number of individuals who contributed to the smooth course of our meeting and whom I would like to sincerely thank: Christian Bischof, Thomas Elze, Marianne Ertl, Gertrud Hafner, Werner Korn, Angelika Krawanja, Florian Krug and his team, Sonja Lang, Albert Müller, Ilse Müller, Irene Müller, Karl Müller, Armin Reautschnig, Marion Schirrmacher, Anton Staudinger, Roman Zlabinger, and, last but not least, my AINS colleagues Siegfried Fussy, Herbert Schwabl and Johannes Mesa

  12. Static Analysis of Bale Crusher Blades Based on ANSYS%基于ANSYS的散包粗碎器刀片静力学分析

    Institute of Scientific and Technical Information of China (English)

    何家林

    2014-01-01

    Bale crushers with spiral blades are analyzed,with Solidedge software used to create a 3D model of bale crusher blades, ANSYS software used to conduct finite element-based static analysis of structures,with the result showing that the blade has rational design and strength that complies with the requirements.%对螺旋叶片刀盘散包粗碎机的粗碎器进行分析,利用SolidEdge软件建立散包粗碎器刀片的三维模型,采用ANSYS软件对刀片进行结构静力学有限元分析。结果表明:刀片设计合理,强度满足要求。

  13. Copper hypersensitivity.

    Science.gov (United States)

    Fage, Simon W; Faurschou, Annesofie; Thyssen, Jacob P

    2014-10-01

    The world production of copper is steadily increasing. Although humans are widely exposed to copper-containing items on the skin and mucosa, allergic reactions to copper are only infrequently reported. To review the chemistry, biology and accessible data to clarify the implications of copper hypersensitivity, a database search of PubMed was performed with the following terms: copper, dermatitis, allergic contact dermatitis, contact hypersensitivity, contact sensitization, contact allergy, patch test, dental, IUD, epidemiology, clinical, and experimental. Human exposure to copper is relatively common. As a metal, it possesses many of the same qualities as nickel, which is a known strong sensitizer. Cumulative data on subjects with presumed related symptoms and/or suspected exposure showed that a weighted average of 3.8% had a positive patch test reaction to copper. We conclude that copper is a very weak sensitizer as compared with other metal compounds. However, in a few and selected cases, copper can result in clinically relevant allergic reactions.

  14. Design of a PFW European type impact crusher%一种PFW欧版反击式破碎机的设计

    Institute of Scientific and Technical Information of China (English)

    陈军学; 吴富德; 刘荷华

    2012-01-01

    介绍了一种PFW欧版反击式破碎机,由于该机采用了重型转子装置,取得了较好的破碎效果。该破碎机结构科学合理,使用安全可靠,维护方便快捷。与传统反击式破碎机相比,不仅延长了设备的使用寿命,缩短了耐磨件的更换时间,而且提高了生产效率,增加了经济效益。%The PFW European type impact crusher was equipped with the heavy type rotor,thus remarkable crushing effect was obtained.It was characterized with reasonable structure,safe and reliable operation mode as well as rapid and convenient maintenance.Compared with traditional impact crushers,the PFW crusher was not only longer in the service life,but also shorter in the replacement period of wear parts.Moreover,it is contributive to improve the productivity and increase the economic benefit.

  15. Development and Selection of Wear Resistant Materials for Hammer Crusher%破碎机锤头耐磨材料的研制与选择

    Institute of Scientific and Technical Information of China (English)

    毛静波

    2012-01-01

    分析了近年来国内外破碎机锤头耐磨材料的研究及应用情况,指出破碎机锤头材料普遍存在的问题:硬度和韧性偏低、耐磨性差,且容易断裂。着重介绍了大型破碎机超强高锰钢锤头、耐磨合金钢锤头、高韧性合金耐磨铸铁锤头的研制和使用效果。%The development and application of wear resistant materials for hammer crusher in recent years is analyzed. It is pointed out that the common problems of hammer crusher materials are lower hardness and toughness, bad abrasion resistant and easy to fracture. The manufacture and using effects of superhigh manganese steel, wearresistant alloy steel and high toughness abrasionresistant alloy cast iron hammers for large crusher are emphasized.

  16. T55-L-714 Engine Development and Qualification. Engine M11 Low Cycle Fatigue Test Report. (0213-005-87),

    Science.gov (United States)

    1987-12-01

    feature items) that are or may be scheduled for inclusion in production engines and which may be sensitive to this type of cycling. Engine M-11 testing was...Remove SGB seal 2-300-138-01 and install seal R. Willard 2-300-138-02G. M. Wolfram M. Zoccoli 2.4) Check balance GP rotors, correct as necessary to

  17. Copper transport.

    Science.gov (United States)

    Linder, M C; Wooten, L; Cerveza, P; Cotton, S; Shulze, R; Lomeli, N

    1998-05-01

    In adult humans, the net absorption of dietary copper is approximately 1 mg/d. Dietary copper joins some 4-5 mg of endogenous copper flowing into the gastrointestinal tract through various digestive juices. Most of this copper returns to the circulation and to the tissues (including liver) that formed them. Much lower amounts of copper flow into and out of other major parts of the body (including heart, skeletal muscle, and brain). Newly absorbed copper is transported to body tissues in two phases, borne primarily by plasma protein carriers (albumin, transcuprein, and ceruloplasmin). In the first phase, copper goes from the intestine to the liver and kidney; in the second phase, copper usually goes from the liver (and perhaps also the kidney) to other organs. Ceruloplasmin plays a role in this second phase. Alternatively, liver copper can also exit via the bile, and in a form that is less easily reabsorbed. Copper is also present in and transported by other body fluids, including those bathing the brain and central nervous system and surrounding the fetus in the amniotic sac. Ceruloplasmin is present in these fluids and may also be involved in copper transport there. The concentrations of copper and ceruloplasmin in milk vary with lactational stage. Parallel changes occur in ceruloplasmin messenger RNA expression in the mammary gland (as determined in pigs). Copper in milk ceruloplasmin appears to be particularly available for absorption, at least in rats.

  18. Copper hypersensitivity

    DEFF Research Database (Denmark)

    Fage, Simon W; Faurschou, Annesofie; Thyssen, Jacob P

    2014-01-01

    hypersensitivity, a database search of PubMed was performed with the following terms: copper, dermatitis, allergic contact dermatitis, contact hypersensitivity, contact sensitization, contact allergy, patch test, dental, IUD, epidemiology, clinical, and experimental. Human exposure to copper is relatively common...

  19. Optimal design of the dynamical parameter of the crusher based on MATLAB%基于MATLAB的破碎机动力学参数优化设计

    Institute of Scientific and Technical Information of China (English)

    黄大明; 杨春兰; 蒋顺梅

    2012-01-01

    破碎机动力学参数设计包含机构平衡重、拉杆弹簧计算载荷、飞轮转动惯量等动力学参数的优化设计,是破碎机设计极其重要的内容.破碎机在运转过程中,其偏心轴、动颚、肘板等运动件都具有一定的加速度,会产生很大的惯性力而且大小、方向呈周期性变化.这些惯性力在运动副中引起附加动载荷,是破碎机零件磨损、机器振动的主要原因.破碎机动力学参数优化设计就是通过优化计算,获得最优的平衡条件,使机构总的惯性力平衡,其根本目的就是减小运动件的惯性力引起的附加动载,消除其有害影响,以确保破碎机运转稳定、可靠,降低机器的振动和噪声,提高设备的寿命和效率.以国内广为生产、使用的PE600×900破碎机为研究对象,利用MATLAB的优化功能,在进行运动学、动力学分析,建立一系列运动方程和力学模型之基础上,采用最优动力平衡法,在MATLAB环境下对破碎机机构平衡重进行优化设计.通过优化计算获得机构平衡重及其方向角的最佳值,使随机构位置而变化的振动力降低到最小.%load of pull-rod spring and rotary inertia of flywheel is an important content of crusher design.The moving part such as eccentric shaft, moving jaw, toggle plate has higher acceleration while the crusher is running and sets up enormous inertia force whose the magnitude and the direction are changing periodically.These inertia forces cause the additional dynamic load in the kinematic pair and it is the main cause which leads to the wear and vibration of crusher.Optimal design of the dynamical parameter of the crusher is to get the optimization equilibrium condition and to balance the total inertia force of mechanism by the optimization calculation.Its fundamental purpose is to decrease the additional dynamic load caused by inertia force of moving part and eliminate the bad effect, in order to ensure crusher stable and

  20. Friction and Wear Reduction of Eccentric Journal Bearing Made of Sn-Based Babbitt for Ore Cone Crusher

    Directory of Open Access Journals (Sweden)

    Auezhan Amanov

    2016-11-01

    Full Text Available An anti-friction Babbitt alloy-coated bearing made by a casting process is a journal bearing, which is used in an ore cone crusher eccentric. The main purpose of the Babbitt coated eccentric is to provide a low friction to support and guide a rotating shaft. Despite the fact that the Babbitt-coated eccentric offers a low friction coefficient and can be operated without a continuous supply of lubricant, it suffers from mining environments and short service life. In this study, an ultrasonic nanocrystalline surface modification (UNSM technique was used to further reduce the friction coefficient, to increase the wear resistance, and to extend the service life of the Sn-based Babbitt metal. The friction and wear behavior of the Sn-based Babbitt metal was investigated using a block-on-ring tester under both dry and oil-lubricated conditions. The results of the experiments revealed that the friction and wear behavior of Sn-based Babbitt metal could be improved by the application of the UNSM technique. The friction and wear mechanisms of the specimens were explained and discussed in terms of changes in surface properties—microstructure, surface hardness, surface roughness, etc.

  1. To Minimize the Waiting Time and Waiting Time Cost of Dumpers, Waiting in a Queue for Loader at Stone Crusher Plant Mine by Using the Single and Multi-Channel Queuing Theory.

    Directory of Open Access Journals (Sweden)

    Vaibhav Singh

    2014-09-01

    Full Text Available Waiting line problems arise because there is too much demand on the facilities so that we can say that there is an excess of waiting time or inadequate number of service facilities. At the stone crusher plant mine the dumpers come to load from the loader. The crusher plant has 11 dumpers and these 11 dumpers make 88 trips during 8-hour day. The company has one loader to load all the dumpers, which results in a formation of long waiting line or queue. Due to this queue there is a long waiting time in queue of dumpers and cost associated with waiting time of dumpers. Queuing theory can quite effectively analyze such queuing phenomenon. In this research paper I have applied the queuing theory to the stone crusher plant mine, where the queue of dumpers formed at the loading station. By applying the single channel queuing theory I analyzed the current situation of the stone crusher plant mine and find the problems of the current system. To overcome the above problems I have applied the multi-channel queuing theory to minimize the waiting time in queue of dumpers and very high cost associated with waiting time of dumpers. In the new system not only waiting time in queue of dumpers and very high cost associated with waiting time of dumpers is reduced but also there is an efficient utilization of dumpers and loaders along with provide the profitable situation to the crusher plant.

  2. 基于虚拟仪器的双转盘破碎机监测系统设计%A Design of Monitoring System Based on Virtual Instrument for Double Turnplate Crusher

    Institute of Scientific and Technical Information of China (English)

    王元生; 樊燕

    2009-01-01

    In view of actual operating situation of the double turnplate crusher, a portable monitoring and diagnosis system of crusher based on virtual instrument was designed. This system was agile and convenient for fixing and operation with a taller cost-effective, and it still could be used for the establishment of operation record,providing hardware support to improvement of the crusher.%针对双转盘破碎机的实际应用情况,设计了基于虚拟仪器技术的便携式破碎机监测和诊断系统.该系统构成灵活、性能价格比较高、便于安装操作,还可以建立设备运行档案,为破碎机以后的改进提供了硬件支持.

  3. 双套筒式碎石机油缸优化设计与应用%Optimization Design and Application of Double Sleeve Crusher Cylinder

    Institute of Scientific and Technical Information of China (English)

    王连富

    2016-01-01

    The crusher was the important basis of the tunneling efficiency when slurry shield machine unearthed in the stra-tum that was rich in pebbles and boulders,it’s reliability directly affects the driving efficiency of slurry shield machine in this kind of geological condition.According to the difficulties and problems summing up and combined with Lanzhou Metro Line 1,the text found the root causation that caused the crusher had a high failure rate,then creatively put forward the meth-od and supporting measures to reduce the crusher fault by increased external protective sleeve.%碎石机是泥水盾构机在富含卵石或孤石地层中顺利掘进的重要保证,其可靠性直接影响泥水盾构机在该种地质条件下的掘进效率。结合兰州轨道1号线一期泥水盾构穿黄地铁隧道项目,针对碎石机在黄河上游富漂石地层中遇到的一系列困难和问题进行了总结分析,找到了碎石机系统故障频发的根本原因,并创造性地提出了通过增加外置保护套筒的方式降低碎石机故障的方法及其配套措施。

  4. ET-46ONCOLYTIC VIRAL THERAPY FOR MALIGNANT GLIOMAS USING MYXOMA VIRUS DELETED FOR ANTI-APOPTOTIC M11L GENE

    Science.gov (United States)

    Pisklakova, Alexandra; McKenzie, Brienne; Kenchappa, Rajappa; McFadden, Grant; Forsyth, Peter

    2014-01-01

    Brain Tumour Initiating Cells (BTICs) are stem-like cells hypothesized to mediate recurrence in high-grade gliomas. Myxoma virus (MyxV) is a promising oncolytic virus, which is highly effective in conventional long term resistant glioma cell lines and less effective in BTICs. We hypothesized that one possible factor limiting efficacy in BTICs is that cell death following infection with MyxV is inhibited by virally encoded anti-apoptotic proteins, such as the Bcl-2 structural homologue, M011L. To test this we evaluated and compared the efficacy of wtMYXV versus the viral construct MyxV-M011L-KO (in which the anti-apoptotic protein M11L has been deleted) in BTICs. We found that WT-MyxV does not induce significant level of apoptosis in infected BTICs, but that MyxV-M011L-KO induces dramatically more apoptosisas shown by caspase activation, PARP cleavage, and Cytochrome C release from the mitochondria M11L from the WT-MyxV localized to the mitochondrial membrane and prevented the association of Bax with the mitochondrial membrane. Finally, silencing of Bax using specific siRNAs significantly blocked the induction of apoptosis and cell death that occurs after infection with mutant MyxV-M011L-KO virus. Therefore MyxV-M011L-KO, which is has the anti-apoptotic virally derived gene M11L, dramatically improves the oncolytic efficacy in BTICs and this is dependent on the presence of the pro-apoptotic host protein, Bax. This is the first demonstration, that the MyxV mutant, genetically modified to promote apoptosis in tumor initiating cells, is significantly more efficacious than the wildtype virus. Strategies, such as this one, that promotes apoptosis in tumor initiating cells might be particularly effective.

  5. Research on abrasion resistance technique for sinter single-roll crusher%烧结矿单辊破碎机抗磨损技术研究

    Institute of Scientific and Technical Information of China (English)

    陈方述; 聂松辉; 周卓林

    2011-01-01

    Sinter single-roll crusher is an important component of the sinter production line ,which operating environment and nature decides that it must possess properties of high-temperature resistance and abrasion resistance.First the invalid reasons and abrasive wear mechanism are studied aim at the problems of easy worn and short service life of the single-roll crusher.A conclusion is made that the abrasion pattern is abrasive wear happens under high-temperature environment with forms of chiseling and cutting.Then a structural design with abrasion resistance is studied ,simultaneously its materials selection and hardfacing technics are also analyzed and discussed.Afterwards ,one single-roll crusher with characteristics of long service life and abrasion resistance is designed.which is proved in the engineering practice that the proposed anti-wear technology for single-roll crusher is viable and effective.%单辊破碎机是烧结矿生产线上一个重要的部件,其工作环境与性质决定其必须具有抗高温与耐磨损的特性.针对目前单辊破碎机易磨损、寿命短的问题,首先,对其失效原因与磨损机理等方面进行了研究,得出其主要磨损形式是高温环境下带有凿削形式磨损的磨粒磨损.然后,研究了其抗磨损结构设计的方法,并对其材料选择与耐磨堆焊工艺等进行了详细分析与探讨,设计了一种抗磨损的长寿命烧结矿单辊破碎机.最后,通过工程实际使用验证了提出的单辊破碎枳抗磨损技术是可行且有效的.

  6. Development of Combined Hammer Used in Counterattack-type Crusher%反击式破碎机组合型锤头的研制

    Institute of Scientific and Technical Information of China (English)

    郭莹

    2011-01-01

    Aiming at the failure characteristics of the hammer used in counterattack-type crusher due to wear, a combination-type hammer used in the counterattack-type crusher was developed. The hammer handle is made of alloy steel material, and the wear-resistant blocks is made of high chromium cast iron, the hammer handle and hammer head is connected with a special structure of profiled tapered dovetail. The connecting surface of the hammer is solid, its impact resistances is strong, and the wear-resistant blocks can be replaced, so its serve life improves, its integrated cost significantly reduces.%针对反击式破碎机中锤头因磨损而失效的特点,研发了一种应用于反击式破碎机的组合型锤头.该锤头以合金钢材料做锤柄,高铬铸铁做耐磨块,采用特殊的异形燕尾槽结构连接锤柄与锤头.锤头连接面结合牢固、抗冲击能力强,而且耐磨块可更换,不仅提高了锤头一次性使用寿命,同时大幅度降低了锤头综合使用成本.

  7. The Applications in Wood Fiber Breakage of Multi Ring Type Hammer Crusher%多环式锤片破碎机在木纤维破碎上的应用

    Institute of Scientific and Technical Information of China (English)

    徐克

    2012-01-01

      The working principle and application in wood fiber breakage of multi ring type hammer crusher are introduced.%  介绍了多环式锤片破碎机的工作原理及其在木纤维破碎上的应用

  8. According to finite-element analysis of backstroke type the crusher%基于ANSYS有限元方法的反击式破碎机优化

    Institute of Scientific and Technical Information of China (English)

    薛仁龙

    2014-01-01

    本文目的在于提高破碎机性能,提出以减小破碎机变形与得到优化的产品的结构优化形式。通过ANSYS有限元结构分析试验,并且利用ANSYS有限元分析软件进行计算分析,获取计算值。根据设计输入与输出响应关系的数学模型,并采用空间局部方法对响应面进行重构。将响应面法、灵敏度分析、试验设计、遗传算法和等多个方法相结合分析,获得较优良的计算数据。通过转子对系统稳定性影响分析,得出转子的结构形式优化,而最终得到优化后的破碎机产品。%This text purpose lies in raising crusher function and put forward with let up a crusher to transform and get excellent turn of the structure of the product Be excellent to turn a form.Pass a limited dollar of ANSYS the structure is analytical experiment, and make use of ANSYS limited dollar the analytical software carry on a calculation analysis, obtain calculation to be worth.According to design the importation and exportation responds to the mathematics model of relation, and adopt space part to put a value method to reach towards responding to noodles to carry on to put a value weighing.Will respond to a noodles method and intelligent degree analysis, experiment a design, heredity the calculate way and etc. several methods combine together analysis and acquire better calculation data.Pass to turn son to the system stability influence analysis, get the structure form that turns son excellent turn, but finally get an excellent crusher after turning of product.

  9. 对辊破碎机高锰钢辊轮加工工艺分析%Machining Process Analysis for High Manganese Steel Roller of Roller Crusher

    Institute of Scientific and Technical Information of China (English)

    张磊; 崔守彬; 李宏士

    2013-01-01

    According to the introduction of using requirement for roller crusher structure and high manga -nese steel roller , analyze the feasibility of roller material performance and machining and present the machining process plan for it .Through the application during the production , the feasibility of this plan is tested and verified .%通过对对辊破碎机的结构及其高锰钢辊轮使用要求的介绍,对辊轮的材料性能要求和加工可行性进行了分析,提出了加工工艺方案。通过生产过程中的应用,方案得到了可行性验证。

  10. Optimal control of the signal-to-noise ratio per unit time of a spin 1/2 particle: the crusher gradient and the radiation damping cases.

    Science.gov (United States)

    Lapert, M; Assémat, E; Glaser, S J; Sugny, D

    2015-01-28

    We show to which extent the signal to noise ratio per unit time of a spin 1/2 particle can be maximized. We consider a cyclic repetition of experiments made of a measurement followed by a radio-frequency magnetic field excitation of the system, in the case of unbounded amplitude. In the periodic regime, the objective of the control problem is to design the initial state of the system and the pulse sequence which leads to the best signal to noise performance. We focus on two specific issues relevant in nuclear magnetic resonance, the crusher gradient and the radiation damping cases. Optimal control techniques are used to solve this non-standard control problem. We discuss the optimality of the Ernst angle solution, which is commonly applied in spectroscopic and medical imaging applications. In the radiation damping situation, we show that in some cases, the optimal solution differs from the Ernst one.

  11. Optimal control of the signal-to-noise ratio per unit time of a spin 1/2 particle: The crusher gradient and the radiation damping cases

    Energy Technology Data Exchange (ETDEWEB)

    Lapert, M.; Glaser, S. J. [Department of Chemistry, Technische Universität München, Lichtenbergstrasse 4, D-85747 Garching (Germany); Assémat, E. [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS-Université de Bourgogne, 9 Ave. A. Savary, BP 47 870, F-21078 Dijon Cedex (France); Department of Chemical Physics, Weizmann Institute of Science, 76100 Rehovot (Israel); Sugny, D., E-mail: dominique.sugny@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB), UMR 6303 CNRS-Université de Bourgogne, 9 Ave. A. Savary, BP 47 870, F-21078 Dijon Cedex (France)

    2015-01-28

    We show to which extent the signal to noise ratio per unit time of a spin 1/2 particle can be maximized. We consider a cyclic repetition of experiments made of a measurement followed by a radio-frequency magnetic field excitation of the system, in the case of unbounded amplitude. In the periodic regime, the objective of the control problem is to design the initial state of the system and the pulse sequence which leads to the best signal to noise performance. We focus on two specific issues relevant in nuclear magnetic resonance, the crusher gradient and the radiation damping cases. Optimal control techniques are used to solve this non-standard control problem. We discuss the optimality of the Ernst angle solution, which is commonly applied in spectroscopic and medical imaging applications. In the radiation damping situation, we show that in some cases, the optimal solution differs from the Ernst one.

  12. Research on Manufacturing Process for Complex Low-alloyed Wear-resisting Crusher Liner%多元低合金耐磨钢破碎机衬板制造工艺研究

    Institute of Scientific and Technical Information of China (English)

    李永堂; 付建华; 雷步芳; 贾璐; 匡利华; 程忠阳

    2013-01-01

    Crasher is widely used in electricity,building materials,metallurgy and mining industry.Crusher liner is the key component of crusher for bearing load.The operations efficiency and production cost of crusher are directly affected by the performance and service life of crusher liner.Therefore,crusher liner is required to have good mechanical properties,impact toughness and abrasive resistance.Aiming at the low wear resistance and short service life of commonly used crusher liner,a new type complex low-alloyed wear-resisting crusher liner is researched.According to the production process of crusher and the performance requirement of crusher liner,the chemical composition is devised.The casting process and heat treatment process are researched.Field trial manufacture and corresponding performance experimental investigation are performed.It is shown from the result of experiment that the Rockwell hardness of this complex low-alloyed wear-resisting steel is above 50 HRC and the impact toughness is above 18 J/cm2.So the liners have better mechanical performance and wear resistance.Production and industrial test shows that the service life of this new liner is much longer and the economic and social benefit is significant.%破碎机在电力、建材、冶金和矿山工业中应用非常广泛.衬板是破碎机上承受载荷的关键零部件,其性能和使用寿命直接影响着破碎机工作效率和生产成本,因此要求衬板具有良好的力学性能、良好的冲击韧度和耐磨性.针对目前国内破碎机衬板耐磨性差和寿命低的状况,研制一种新型多元低合金耐磨钢破碎机衬板.根据破碎机生产工艺和破碎板的性能要求,设计衬板材料的化学成分、制定铸造工艺和热处理工艺,进行现场试制和试验研究.试验结果表明,这种低合金耐磨钢的洛氏硬度达到50 HRC以上,冲击韧度达到18J/cm2以上,具有良好的力学性能和耐磨性.装机和工业试验证明,新型破碎机

  13. 破碎机锤头耐磨材料与制造工艺的发展%Development of wear-resistant materials for crusher hammers and their manufacturing process

    Institute of Scientific and Technical Information of China (English)

    李梦; 程巨强; 高滋辰; 刘志学

    2012-01-01

    介绍了破碎机锤头常用材质的种类、成分、组织和性能特点;综述了破碎机锤头耐磨材料的几种生产工艺及特点。破碎机锤头的耐磨材料要根据破碎物料的种类和设备情况来选择。锤头工作应力较大时,可选择高锰钢或超高锰钢锤头材料,锤头的生产可采用整体铸造的方法;锤头工作应力较小时,可选择合金钢整体铸造或碳钢与高铬铸铁复合铸造方法。复合铸造法生产破碎机锤头,是提高破碎机锤头使用寿命的较好方法。%The kind of common materials for crusher hammers and their microstructure, properties and char- acteristics were introduced, and several processes of manufacturing wear-resistant materials and their charac- teristics were summarized. Wear-resistant materials for the crusher hammers should be selected according to the kind of crushing material and equipment status. While the hammer had higher operating stress, the high manganese steel or ultra-high manganese steel could be selected for hammer material and the hammer could be manufactured by integral casting. While the hammer had lower operating stress, integral casting of alloy steel or compound casting of carbon steel and high chromium cast iron could be selected. The application of compound casting to manufacture of the crusher hammer was a good way to improve the lifespan of the crusher hammer.

  14. PF1013反击式破碎机总体结构概述及部分参数确定%PF1013 Counterattack Crusher Overall Structure Overview and Parameters Determination

    Institute of Scientific and Technical Information of China (English)

    高春兰

    2015-01-01

    According to the situation of the use of the counterattack crusher statistics , counterattack crusher in the use of the process , the overall structure design and layout of the equipment will directly affect the o‐verall performance and quality of the equipment ;and the phenomenon of the belt w heel skid and fracture is very common , serious influence equipment normal use . This paper mainly aims at the overall structure of PF1013 counterattack crusher composition , partial parameter selection , the selection of the belt w heel op‐timization design is discussed .%根据反击式破碎机现场使用情况统计,反击式破碎机在使用过程中,设备的总体结构设计、布局会直接影响设备的总体性能及质量;而且,皮带轮出现打滑、断裂的现象非常普遍,严重影设备的正常使用。本文主要针对PF1013反击式破碎机的总体结构组成、部分参数选择、皮带轮优化选型设计进行论述。

  15. A Methodology to Estimate Ores Work Index Values, Using Miduk Copper Mine Sample

    Directory of Open Access Journals (Sweden)

    Mohammad Noaparast

    2012-12-01

    Full Text Available It is always attempted to reduce the costs of comminution in mineral processing plants. One of thedifficulties in size reduction section is not to be designed properly. The key factor to design size reductionunits such as crushers and grinding mills, is ore’s work index. The work index, wi, presents the oregrindability, and is used in Bond formula to calculate the required energy. Bond has defined a specificrelationship between some parameters which is applied to calculate wi, which are control screen, fineparticles produced, feed and product d80.In this research work, a high grade copper sample from Miduk copper concentrator was prepared, and itswork index values were experimentally estimated, using different control screens, 600, 425, 212, 150, 106and 75 microns. The obtained results from the tests showed two different behaviors in fine production.According to these two trends the required models were then defined to present the fine mass calculationusing control screen. In next step, an equation was presented in order to calculate Miduk copper ore workindex for any size. In addition to verify the model creditability, a test using 300 microns control screenwas performed and its result was compared with calculated ones using defined model, which showed agood fit. Finally the experimental and calculated values were compared and their relative error was equalto 4.11% which is an indication of good fit for the results.

  16. 锤式破碎机锤头有限元模型仿真%Finite Model Simulation of Hammer Head of Hammer-type Crusher

    Institute of Scientific and Technical Information of China (English)

    李懿

    2011-01-01

    当锤头对矿石的打击力正好发生在锤头的碰撞中心(或称打击中心)时,就可以完全消除锤头销孔与销轴之间的碰撞反力,降低锤头磨损,提高破碎机效率。利用锤头销孔所受碰撞反力的计算公式,建立锤头的有限元模型,通过对锤面上不同点打击力加载,得出了锤面上各点的所受应力,依据结果优化锤头结构尺寸。%When the hitting force of hammer head on ore is just at the collision center of the hammer head(or hitting center),the collision counterforce of hammer pin hole and shaft can be completely eliminated,thus reducing hammer wearing and enhancing crusher efficiency.Through the calculation formula of collision counterforce on hammer pin hole,the article establishes the finite model of hammer,and obtains the stress on each point of the hammer surface through loading hitting force on different points of the hammer surface.The hammer structure size is optimized according to the result.

  17. Flexible design and algorithm achievement of hammer crushers%锤式破碎机柔性化设计及其算法实现

    Institute of Scientific and Technical Information of China (English)

    周征; 段国林; 岳磊; 许红静; 李宁

    2011-01-01

    In order to study the force states of key parts of hammer crashers, the size of the spindle is optimized, the hammer lifespan is predicted, and the collision and crushing course is simulated. Then, the flexible design method is proposed, generating algorithm and connecting algorithm of flexible body are studied. Moreover, the rigid and flexible coupled model is built. With the application of proe/adams/ansys, the performancedriven analysis results are obtained, which offers references for the development of hammer crushers.%为了研究锤式破碎机关键零部件的受力情况,对主轴进行设计优化,对锤头进行寿命预测,对碰撞破碎过程进行模拟仿真,提出了柔性化设计方法,研究了柔性体的生成算法和连接算法,建立了刚柔耦合分析模型.通过proe/adams/ansys的联合应用,得到了满足性能驱动的分析结果.研究结果将为锤式破碎机的设计开发提供依据.

  18. Copper allergy from dental copper amalgam?

    Science.gov (United States)

    Gerhardsson, Lars; Björkner, Bert; Karlsteen, Magnus; Schütz, Andrejs

    2002-05-06

    A 65-year-old female was investigated due to a gradually increasing greenish colour change of her plastic dental splint, which she used to prevent teeth grinding when sleeping. Furthermore, she had noted a greenish/bluish colour change on the back of her black gloves, which she used to wipe her tears away while walking outdoors. The investigation revealed that the patient had a contact allergy to copper, which is very rare. She had, however, had no occupational exposure to copper. The contact allergy may be caused by long-term exposure of the oral mucosa to copper from copper-rich amalgam fillings, which were frequently used in childhood dentistry up to the 1960s in Sweden. The deposition of a copper-containing coating on the dental splint may be caused by a raised copper intake from drinking water, increasing the copper excretion in saliva, in combination with release of copper due to electrochemical corrosion of dental amalgam. The greenish colour change of the surface of the splint is probably caused by deposition of a mixture of copper compounds, e.g. copper carbonates. Analysis by the X-ray diffraction technique indicates that the dominant component is copper oxide (Cu2O and CuO). The corresponding greenish/bluish discoloration observed on the back of the patient's gloves may be caused by increased copper excretion in tears.

  19. Copper Products Capacity Expansion Stimulate the Copper Consumption

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>The dramatic growth of copper consumption in China can directly be seen from the expansion of copper products capacity.According to sta- tistics,in the past 4 years,the improvement on the balance of trade on copper bar,copper,and copper alloy and copper wire & cable has driven the growth of copper consumption a lot.

  20. Antwerp Copper Plates

    DEFF Research Database (Denmark)

    Wadum, Jørgen

    1999-01-01

    In addition to presenting a short history of copper paintings, topics detail artists’ materials and techniques, as well as aspects of the copper industry, including mining, preparation and trade routes.......In addition to presenting a short history of copper paintings, topics detail artists’ materials and techniques, as well as aspects of the copper industry, including mining, preparation and trade routes....

  1. Copper and copper proteins in Parkinson's disease.

    Science.gov (United States)

    Montes, Sergio; Rivera-Mancia, Susana; Diaz-Ruiz, Araceli; Tristan-Lopez, Luis; Rios, Camilo

    2014-01-01

    Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson's disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson's disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased protein-bound copper in brain may enhance iron accumulation and the associated oxidative stress. The function of other copper-binding proteins such as Cu/Zn-SOD and metallothioneins is also beneficial to prevent neurodegeneration. Copper may regulate neurotransmission since it is released after neuronal stimulus and the metal is able to modulate the function of NMDA and GABA A receptors. Some of the proteins involved in copper transport are the transporters CTR1, ATP7A, and ATP7B and the chaperone ATOX1. There is limited information about the role of those biomolecules in the pathophysiology of Parkinson's disease; for instance, it is known that CTR1 is decreased in substantia nigra pars compacta in Parkinson's disease and that a mutation in ATP7B could be associated with Parkinson's disease. Regarding copper-related therapies, copper supplementation can represent a plausible alternative, while copper chelation may even aggravate the pathology.

  2. Research on Moving Increment and Period of crusher in Depression Metallic Open Pit%深凹金属露天矿破碎站移设步距与周期的研究

    Institute of Scientific and Technical Information of China (English)

    匡勇; 杨成林; 李良军

    2011-01-01

    In the depression metallic open pit which adopts the semi-continuous transportation of truck-semi mobile crusher-belt, it is very difficult to determine the moving increment and period of crusher, because the complexity of existence of ore body and mining sequence. Took a mine designing for example,after adopted the theory of minimum unit cost,set up the cost calculate model and solved by computer,the best result was found. It is important for guiding production,and a caJ-culation method for moving increment and period of crusher was found.%在采用汽车半移动破碎一胶带半连续开拓运输方式的深凹金属露天矿中,由于其矿体赋存条件、剥采顺序的复杂性,确定破碎站移设的步距与周期变得十分困难.以设计某矿山为例,应用单位成本最小理论,建立了成本计算数学模型,并采用计算机编程的方法求出了最优解,取得了满意的效果.对生产实际有非常重要的指导意义,从而探索出一种深凹金属露天矿破碎站移设步距与周期的计算方法.

  3. 碎渣机高性能滚齿板的研究%Investigation on High-Properties Rolling-Teeth Plank in Slag Crusher

    Institute of Scientific and Technical Information of China (English)

    杨继伟; 孙长海; 付雪松; 刘宝惜; 张雪; 周文龙

    2016-01-01

    The conventional rolling-teeth planks are easy to wear and its service life is low in the dry-type slag extractor system.The influences of shape,size and distribution of the teeth on the productivity effect and service life of slag crusher were discussed in this paper.A new kind of rolling-teeth plank with effective and wearing resistance was designed through optimizing the structure of rolling-teeth plank.The microstructures,impact ductility,hardness and wear resistances of the rolling-teeth planks made of the high-chromium cast-iron in the heat treatment process are studied.The new type planks treated with optimal heat process have a long service life.%干式排渣机系统中,传统滚齿板容易受磨损,其服役寿命很短.本文研究了滚齿板滚齿的形状、尺寸和滚齿分布对碎渣机的工作效果和服役寿命的影响;通过优化滚齿板的结构,设计出新型高效耐磨的滚齿板.采用高铬铸铁材料制造了新型结构滚齿板,并研究了热处理工艺对显微组织、冲击韧度、硬度、磨损性能的影响,获得合理的热处理工艺,使得新型滚齿板的服役寿命得到有效提高.

  4. Evaluation of the PhysioTel™ Digital M11 cardiovascular telemetry implant in socially housed cynomolgus monkeys up to 16weeks after surgery.

    Science.gov (United States)

    Andersen, Ninette K; Meyer, Olivier; Bradley, Alys; Dragsted, Nils; Lassen, Anders B; Sjögren, Ingrid; Larsen, Julie M; Harvey, Warren; Bator, Rastislav; Milne, Aileen

    2017-09-01

    The novel PhysioTel™ Digital M11 telemetry implant was evaluated in socially housed monkeys with respect to both safety pharmacological cardiovascular (arterial blood pressure (BP), heart rate (HR) and electrocardiogram (ECG)) and toxicological (clinical pathology and histopathology) endpoints. Telemetry and clinical pathology data were obtained repeatedly up to 16weeks after surgery in four female cynomolgus monkeys, followed by necropsy. Due to postsurgical complications, one spare animal was included and only toxicological endpoints from the affected (fifth animal) were reported. Continuous telemetry recordings were conducted at periods without dosing and after ascending doses of moxifloxacin (0, 10, 30, 100mg/kg) and L-NAME (0, 0.1, 1, 10mg/kg). Additionally, a retrospective power analysis was conducted based on baseline M11 implant data from 32 other animals. During periods without dosing, the cardiovascular endpoints were stable over time and within normal ranges. Moxifloxacin and L-NAME elicited the expected pharmacological responses with dose-dependent increase in QTca (8, 17, 22ms) and BP (mean BP: 12, 21, 34mmHg), respectively. Expected intravascular and tissue reactions were observed at the sites of the BP catheter and the transmitter. Signs of infection (localised to the transmitter implantation site with associated systemic effects) was noted in the fifth animal. No systemic pathologies were seen in any animals. Power analysis (80% power) indicated that the minimal differences which can be detected in a parallel group design (n=6) are 7mmHg (mean BP), 16bpm (HR), 12ms (QTca). The M11 implant provided stable, high quality ECG and BP data for a duration covering the length of sub-chronic repeated dose toxicity studies without important impact on toxicological endpoints. Adequate power in order to elucidate major treatment-related cardiovascular effects was demonstrated. However to avoid post-surgical complications the implantation procedures should be

  5. [Copper pathology (author's transl)].

    Science.gov (United States)

    Mallet, B; Romette, J; Di Costanzo, J D

    1982-01-30

    Copper is an essential dietary component, being the coenzyme of many enzymes with oxidase activity, e.g. ceruloplasmin, superoxide dismutase, monoamine oxidase, etc. The metabolism of copper is complex and imperfectly known. Active transport of copper through the intestinal epithelial cells involves metallothionein, a protein rich in sulfhydryl groups which also binds the copper in excess and probably prevents absorption in toxic amounts. In hepatocytes a metallothionein facilitates absorption by a similar mechanism and regulates copper distribution in the liver: incorporation in an apoceruloplasmin, storage and synthesis of copper-dependent enzymes. Metallothioneins and ceruloplasmin are essential to adequate copper homeostasis. Apart from genetic disorders, diseases involving copper usually result from hypercupraemia of varied origin. Wilson's disease and Menkes' disease, although clinically and pathogenetically different, are both marked by low ceruloplasmin and copper serum levels. The excessive liver retention of copper in Wilson's disease might be due to increased avidity of hepatic metallothioneins for copper and decreased biliary excretion through lysosomal dysfunction. Menkes' disease might be due to low avidity of intestinal and hepatic metallothioneins for copper. The basic biochemical defect responsible for these two hereditary conditions has not yet been fully elucidated.

  6. 复摆颚式破碎机颚板运动及磨损分析%Movement and Wear Analysis on Crushing Plate of Compound Pendulum Jaw Crusher

    Institute of Scientific and Technical Information of China (English)

    罗红萍; 陈晓云

    2011-01-01

    颚板是复摆颚式破碎机的主要工作构件,在破碎物料的过程中经受物料的严重磨损和激烈的冲击作用,颚板的寿命成为工程上关注的问题.通过对颚式破碎机颚板的运动分析,并结合物料的流动受力分析,颚板表面的微观及失效等磨损机理对颚式破碎机颚板的磨损进行了分析,从而得出了物料破碎时颚板磨损的原因,为提高颚板使用寿命寻求理论依据.%Crushing plate is jaw crusher's main work components. In crushing materials it withstands severe wear of materials and fierce impact. Life of crushing plate becomes the project's issues of concern. This article analyses movement of crushing plate of jaw crusher.And combining force analysis of material flow and wear mechanism analysis of crushing plate surface microstructure and failure, wear of crushing plate of jaw crusher are also analysed. Thus the article concludes causes of jaw plate wear when material crushed and looks for theoretical basis to enhance the life of crushing plate.

  7. The Countermeasures for Improving the Service Life of High Manganese Steel’s Hammerhead of Hammer Crusher%提高锤式破碎机高锰钢锤头使用寿命的对策

    Institute of Scientific and Technical Information of China (English)

    李密; 姚锡严

    2013-01-01

      锤式破碎机锤头是破碎机的关键部件之一,其质量的好坏关系到使用寿命的长短,因此要求锤头不仅具有较高的硬度及耐磨损性能,还要有较高的韧性及承受冲击性能。文章分析了影响锤式破碎机高锰钢锤头破碎能力的主要因素,提出了提高锤式破碎机高锰钢锤头使用寿命的对策。%The hammerhead of hammer crusher is one of the key components of crumbling machine. Its quality is related to the length of service life, so the hammerhead not only needs high hardness and wear-resisting property, but also needs higher toughness and impact performance. The paper analyzes the major factors of affecting the breaking ability of high manganese steel's hammerhead of hammer crusher, and puts forward countermeasures for improving the service life of it.

  8. 电刷镀在H-6000型破碎机锥形轴修复中的应用%Application of Brush Plating on Cone Axis for H-6000-crusher

    Institute of Scientific and Technical Information of China (English)

    李晓冰; 王希靖; 李树伟

    2009-01-01

    The application of brush plating on H-6000-crusher cone axis was introduced,and the process and conditions during brush plating were obtained.The use of repaired proof shows that:cone axis of brush-coating and the combination of strength,wear resistance can meet the H-6000-crusher in heavy,the impact load,power transmission,high-frequency vibration,dust and other harsh environment of the normal work.%介绍了电刷镀技术在H-6000型破碎机锥形轴修复中的应用,提出了电刷镀修复H-6000型破碎机锥形轴的工艺流程及条件.修复后的锥形轴经使川证明:锥形轴的刷镀层与基体的结合强度、耐磨性可以满足H-6000型破碎机在重载、冲击负荷、传递功率大、振动频率高、粉尘大等恶劣环境中正常工作.

  9. [Copper IUDs (author's transl)].

    Science.gov (United States)

    Thiery, M

    1983-10-01

    Following initial development of the Grafenberg ring in the 1920's, IUDs fell into disuse until the late 1950s, when plastic devices inserted using new technology began to gain worldwide acceptance. Further research indicated that copper had a significant antifertility effect which increased with increasing surface area, and several copper IUDs were developed and adapted, including the Copper T 200, the Copper T 220C, and the Copper T 380 A, probably the most effective yet. The Gravigard and Multiload are 2 other copper devices developed according to somewhat different principles. Copper devices are widely used not so much because of their great effectiveness as because of their suitability for nulliparous patients and their ease of insertion, which minimizes risk of uterine perforation. Records of 2584 women using Copper IUDs for 7190 women-years and 956 women using devices without copper for 6059 women-years suggest that the copper devices were associated with greater effectiveness and fewer removals for complications. Research suggests that the advantages of copper IUDs become more significant with increased duration of use. Contraindications to copper devices include allergy to copper and hepatolenticular degeneration. No carcinogenic or teratogenic effect of copper devices has been found, but further studies are needed to rule out other undesirable effects. Significant modifications of copper devices in recent years have been developed to increase their effectiveness, prolong their duration of usefulness, facilitate insertion and permit insertion during abortion or delivery. The upper limit of the surface area of copper associated with increased effectiveness appears to be between 200-300 sq mm, and at some point increases in copper exposure may provoke expulsion of the IUD. The duration of fertility inhibition of copper IUDs is usually estimated at 2-3 years, but recent research indicates that it may be 6-8 years, and some devices may retain copper surface

  10. Handling of Copper and Copper Oxide Nanoparticles by Astrocytes.

    Science.gov (United States)

    Bulcke, Felix; Dringen, Ralf

    2016-02-01

    Copper is an essential trace element for many important cellular functions. However, excess of copper can impair cellular functions by copper-induced oxidative stress. In brain, astrocytes are considered to play a prominent role in the copper homeostasis. In this short review we summarise the current knowledge on the molecular mechanisms which are involved in the handling of copper by astrocytes. Cultured astrocytes efficiently take up copper ions predominantly by the copper transporter Ctr1 and the divalent metal transporter DMT1. In addition, copper oxide nanoparticles are rapidly accumulated by astrocytes via endocytosis. Cultured astrocytes tolerate moderate increases in intracellular copper contents very well. However, if a given threshold of cellular copper content is exceeded after exposure to copper, accelerated production of reactive oxygen species and compromised cell viability are observed. Upon exposure to sub-toxic concentrations of copper ions or copper oxide nanoparticles, astrocytes increase their copper storage capacity by upregulating the cellular contents of glutathione and metallothioneins. In addition, cultured astrocytes have the capacity to export copper ions which is likely to involve the copper ATPase 7A. The ability of astrocytes to efficiently accumulate, store and export copper ions suggests that astrocytes have a key role in the distribution of copper in brain. Impairment of this astrocytic function may be involved in diseases which are connected with disturbances in brain copper metabolism.

  11. Simulation Analysis of the Effect of Spring Stiffness on the Roll Crusher Performance%弹簧刚度对辊式破碎机使用性能影响的仿真分析

    Institute of Scientific and Technical Information of China (English)

    李群松; 唐前鹏

    2012-01-01

    Spring safety device as the roll crusher's key component, the value of spring stiffness has a very important impact on the performance of the whole device, when the spring-loaded is too large, the wear is intensified and the power consumption is increased; while small spring force will increase the number of articles whose dimeter are bigger than the averige value. Aiming at this problem, the relationship between different stiffness of spring and the vibration of angular velocity of the moving roll and its moving distance were studied through simulation analysis based on the ADAMS softwear by setting five different spring stiffness. To simulate the working condition of the crusher, random signal was applied. The simulation results show that the relationship between stiffness of spring and the vibration of angular velocity are no trend of monotonic increasing or decreasing, while the moving distance of the roll decreses with the increasing of the stiffness. This paper provides a new method to select and optimize the stiffness of spring safety device in roll crusher.%辊式破碎机中弹簧保险装置的弹簧刚度的大小对破碎机的使用性能具有重要影响,过大的弹簧力会促使辊子磨损加快和功率消耗增大,过小的弹簧力将使破碎产物的超粒增多。针对该问题,利用ADAMS仿真软件,采用随机载荷模拟破碎机的实际工况,设置了5种不同的弹簧刚度,通过仿真分析研究了弹簧刚度与动辊角速度波动及移动距离的关系。仿真结果表明:动辊角速度波动程度与弹簧刚度不呈单调递增或递减的关系,动辊的移动距离随着弹簧刚度的增大而减小。为辊式破碎机弹簧保险装置弹簧刚度的选择与优化提供了一种新的方法。

  12. Canine models of copper toxicosis for understanding mammalian copper metabolism

    OpenAIRE

    Fieten, Hille; Leegwater, Peter A. J.; Watson, Adrian L.; Rothuizen, Jan

    2011-01-01

    Hereditary forms of copper toxicosis exist in man and dogs. In man, Wilson’s disease is the best studied disorder of copper overload, resulting from mutations in the gene coding for the copper transporter ATP7B. Forms of copper toxicosis for which no causal gene is known yet are recognized as well, often in young children. Although advances have been made in unraveling the genetic background of disorders of copper metabolism in man, many questions regarding disease mechanisms and copper homeo...

  13. Hair copper in intrauterine copper device users.

    Science.gov (United States)

    Thiery, M; Heyndrickx, A; Uyttersprot, C

    1984-03-01

    The antifertility effect of copper-bearing IUDs is based on continuous release of copper, which is a result of the reaction between the metal and the uterine secretions. Released cupric ions collect in the endometrium and in the uterine fluid but significant accumulation has not been found in the bloodstream or elsewhere. Following Laker's suggestion that hair be used for monitoring essential trace elements, e.g., copper, we checked the copper content of the hair of women wearing copper-bearing IUDs. Samples of untreated pubic hair removed by clipping before diagnostic curettage were obtained from 10 young (24-34 years old), white caucasian females who until then had been wearing an MLCu250 IUD for more than 1 year. Pubes from 10 comparable (sex, age, race) subjects who had never used a Cu-containing device served as controls. The unwashed material was submitted to the toxicology laboratory, where the copper content was assessed by flameless atomic absorption, a technique whose lower limit of measurement lies at a concentration of 0.05 mcg Cu/ml fluid (50 ppb). Hair samples were washed to remove extraneous traces of metal according to the prescriptions of the International Atomic Energy Agency, weighed, and mineralized, after which a small volume (10 mcl) of the diluted fluid was fed into the graphite furnace. Each sample (75-150 mg) was analyzed 4 times, both before and after washing. Since the cleaning procedure reduces the weight of the sample (mainly by the removal of fat, dust, etc.) this explains why the percentage copper content of washed hair is higher than that of unwashed hair belonging to the same subject. The results indicate that there was no significant difference (Mann-Whitney U test) between the mean copper levels of both unwashed and washed pubes from women who were using or had never used an MLCu250 IUD. We therefore conclude that the use of this copper-containing device is not associated with significant accumulation of copper in (pubic) hair.

  14. China Copper Processing Industry Focus

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>1. Market Consumption The ’China Factor’ and Copper Price Fluctuation We all know China is an enormous consumer of copper,but the exact levels of consumption and where the copper has gone remains a mystery.

  15. Biogenic nanoparticles: copper, copper oxides, copper sulphides, complex copper nanostructures and their applications.

    Science.gov (United States)

    Rubilar, Olga; Rai, Mahendra; Tortella, Gonzalo; Diez, Maria Cristina; Seabra, Amedea B; Durán, Nelson

    2013-09-01

    Copper nanoparticles have been the focus of intensive study due to their potential applications in diverse fields including biomedicine, electronics, and optics. Copper-based nanostructured materials have been used in conductive films, lubrification, nanofluids, catalysis, and also as potent antimicrobial agent. The biogenic synthesis of metallic nanostructured nanoparticles is considered to be a green and eco-friendly technology since neither harmful chemicals nor high temperatures are involved in the process. The present review discusses the synthesis of copper nanostructured nanoparticles by bacteria, fungi, and plant extracts, showing that biogenic synthesis is an economically feasible, simple and non-polluting process. Applications for biogenic copper nanoparticles are also discussed.

  16. Parameter optimization of overlaying welding for herringbone gear rollers of crushers based on Taguchi method%基于田口试验法碾碎机人字齿轴辊堆焊参数的优化

    Institute of Scientific and Technical Information of China (English)

    潘玉山; 姚恭民

    2011-01-01

    应用田口试验法对影响碾碎机人字齿轴辊堆焊层质量参数(堆焊电流、堆焊速度、焊丝送进速度、焊丝直径及焊丝伸出长度等)进行分析,得出堆焊参数优化组合,并通过试验验证了其正确性.%The main factors (overlaying welding current, overlaying welding speed, wire feeding speed, wire diameter and wire extending length etc.) affecting the overlaying welding quality of the herringbone gear roller of the crusher are analyzed with Taguchi method, and the optimal combination of overlaying welding parameters is obtained. Finally, its correctness is verified with tests.

  17. ZGMn13钢形变诱发马氏体相变及在捶击件上的应用%Martensitic Phase Transformation Inducted by Deformation of ZGMn13 and Application at Hammering Parts for Ore-Crusher

    Institute of Scientific and Technical Information of China (English)

    储凯; 傅建

    2000-01-01

    对ZGMn13钢的化学成分、显微组织、热处理方法及在工作过程中形变诱发马氏体相变机理进行了分析,对比了在矿石破碎中高锰钢捶击件与其它常用材料捶击件的耐磨性和使用效果。%ZGMn13's chemical composition, metallographic structure, heat-treat methods and the mechanism for Martensitic transformation inducted by deformation of ZGMn13 are analyzed. And wear-resistance and application-effects of ore crusher' hammering parts made respectively of high-manganese steel and other materials are compared.

  18. Adh enhances Actinobacillus pleuropneumoniae pathogenicity by binding to OR5M11 and activating p38 which induces apoptosis of PAMs and IL-8 release.

    Science.gov (United States)

    Wang, Lei; Qin, Wanhai; Zhang, Jing; Bao, Chuntong; Zhang, Hu; Che, Yanyi; Sun, Changjiang; Gu, Jingmin; Feng, Xin; Du, Chongtao; Han, Wenyu; Richard, Paul Langford; Lei, Liancheng

    2016-04-05

    Members of the Trimeric Autotransporter Adhesin (TAA) family play a crucial role in the adhesion of Gram-negative pathogens to host cells, but the immunopathogenesis of TAAs remains unknown. Our previous studies demonstrated that Adh from Actinobacillus pleuropneumoniae (A. pleuropneumoniae) is required for full bacterial pathogenicity. Alveolar macrophages are the first line of defense against respiratory infections. This study compared the interactions between porcine alveolar macrophages (PAMs) and wild-type A. pleuropneumoniae (5b WT) or an Adh-deletion strain (5b ΔAdh) via gene microarray, immunoprecipitation and other technologies. We found that Adh was shown to interact with the PAMs membrane protein OR5M11, an olfactory receptor, resulting in the high-level secretion of IL-8 by activation of p38 MAPK signaling pathway. Subsequently, PAMs apoptosis via the activation of the Fax and Bax signaling pathways was observed, followed by activation of caspases 8, 9, and 3. The immunological pathogenic roles of Adh were also confirmed in both murine and piglets infectious models in vivo. These results identify a novel immunological strategy for TAAs to boost the pathogenicity of A. pleuropneumoniae. Together, these datas reveal the high versatility of the Adh protein as a virulence factor and provide novel insight into the immunological pathogenic role of TAAs.

  19. Harmonic Vibrational Frequencies: Approximate Global Scaling Factors for TPSS, M06, and M11 Functional Families Using Several Common Basis Sets.

    Science.gov (United States)

    Kashinski, D O; Chase, G M; Nelson, R G; Di Nallo, O E; Scales, A N; VanderLey, D L; Byrd, E F C

    2017-03-23

    We propose new approximate global multiplicative scaling factors for the DFT calculation of ground state harmonic vibrational frequencies using functionals from the TPSS, M06, and M11 functional families with standard correlation consistent cc-pVxZ and aug-cc-pVxZ (x = D, T, and Q), 6-311G split valence family, Sadlej and Sapporo polarized triple-ζ basis sets. Results for B3LYP, CAM-B3LYP, B3PW91, PBE, and PBE0 functionals with these basis sets are also reported. A total of 99 harmonic frequencies were calculated for 26 gas-phase organic and nonorganic molecules typically found in detonated solid propellant residue. Our proposed approximate multiplicative scaling factors are determined using a least-squares approach comparing the computed harmonic frequencies to experimental counterparts well established in the scientific literature. A comparison of our work to previously published global scaling factors is made to verify method reliability and the applicability of our molecular test set.

  20. 圆锥破碎机挤压破碎力建模与衬板磨损预测%Modeling Crushing Pressure and Liner Wear of Cone Crusher

    Institute of Scientific and Technical Information of China (English)

    董钢; 范秀敏; NEUMAYER Johannes

    2011-01-01

    设计并进行了集料挤压破碎力实验,并以此建立较为精确的挤压破碎力求解模型;通过对物料的运动学特征分析和对破碎过程求解,获得破碎腔各区域的压缩比和粒度分布系数及挤压破碎压力;分析了破碎壁表面挤压破碎力的作用形式并求解其分量,实现了对破碎壁表面磨损量的求解.结果表明:所建立的集料挤压破碎力模型的求解结果与实地调研所得结果相符,并实现了对破碎壁表面磨损趋势的预测.%The rock material compression experiments were carried out and a pressure model relating compression ratio and particle size distribution to compression pressure was presented. The kinematics of rock material in crushing chamber was analyzed and a method for calculating the pressure distribution on cone crusher liners was proposed. Calculating the components of crushing pressure and putting them into wear prediction model, the liner wear of cone crusher was achieved. The results show that the model is consistent with the research data, and the prediction of wear is realized.

  1. Failure analysis and material selection of jaw plate of compound pendulum jaw crusher%复摆颚式破碎机颚板失效分析及材料选择

    Institute of Scientific and Technical Information of China (English)

    罗红萍

    2012-01-01

    颚板是复摆颚式破碎机的主要工作构件,在破碎物料的过程中经受物料的严重磨损和激烈的冲击作用,颚板的寿命成为工程上关注的重点问题。通过对颚式破碎机颚板的运动进行分析,结合破碎腔内物料的运动受力分析、颚板失效后的表面微观状态等情况,对颚式破碎机颚板的失效进行了分析,从而得出破碎机在进行破碎时颚板失效的原因,并寻求更合理的颚板材料,以提高其使用寿命。%Jaw plate is a main work component of the jaw crusher.During crushing course,material withstands severe wear and f ierce impact.The lifespan of the jaw plate becomes the focus in projects.After analyzing the movement of the jaw plate of the jaw crusher,and in combination with the analysis of the force status of material in crushing camber and the surface microstructure of failure jaw plate,the paper analyzed the failure of the jaw plate.At last,the failure causes of the jaw plate were found out,which offered foundation for looking for more reasonable material for the jaw plate so as to enhance its service lifespan.

  2. Copper and silver halates

    CERN Document Server

    Woolley, EM; Salomon, M

    2013-01-01

    Copper and Silver Halates is the third in a series of four volumes on inorganic metal halates. This volume presents critical evaluations and compilations for halate solubilities of the Group II metals. The solubility data included in this volume are those for the five compounds, copper chlorate and iodate, and silver chlorate, bromate and iodate.

  3. Coping with copper

    DEFF Research Database (Denmark)

    Nunes, Ines; Jacquiod, Samuel; Brejnrod, Asker

    2016-01-01

    Copper has been intensively used in industry and agriculture since mid-18(th) century and is currently accumulating in soils. We investigated the diversity of potential active bacteria by 16S rRNA gene transcript amplicon sequencing in a temperate grassland soil subjected to century-long exposure......, suggesting a potential promising role as bioindicators of copper contamination in soils....

  4. Kunpeng Copper:The largest Copper Smelting Company of Sichuan

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>On September 9,Liangshan Mining Company’s 100,000 tons/year cathode copper project kicked off.It is another key project of the company following the successful launch of the 100,000 tons/year anode copper project.Based on ISA copper smelting technology of the largest open-cast copper mine in southwest China,

  5. Posttranslational regulation of copper transporters

    NARCIS (Netherlands)

    van den Berghe, P.V.E.

    2009-01-01

    The transition metal copper is an essential cofactor for many redox-active enzymes, but excessive copper can generate toxic reactive oxygen species. Copper homeostasis is maintained by highly conserved proteins, to balance copper uptake, distribution and export on the systemic and cellular level. Th

  6. Fabricating Copper Nanotubes by Electrodeposition

    Science.gov (United States)

    Yang, E. H.; Ramsey, Christopher; Bae, Youngsam; Choi, Daniel

    2009-01-01

    Copper tubes having diameters between about 100 and about 200 nm have been fabricated by electrodeposition of copper into the pores of alumina nanopore membranes. Copper nanotubes are under consideration as alternatives to copper nanorods and nanowires for applications involving thermal and/or electrical contacts, wherein the greater specific areas of nanotubes could afford lower effective thermal and/or electrical resistivities. Heretofore, copper nanorods and nanowires have been fabricated by a combination of electrodeposition and a conventional expensive lithographic process. The present electrodeposition-based process for fabricating copper nanotubes costs less and enables production of copper nanotubes at greater rate.

  7. [Copper and the human body].

    Science.gov (United States)

    Krízek, M; Senft, V; Motán, J

    1997-11-19

    Copper is one of the essential trace elements. It is part of a number of enzymes. Deficiency of the element is manifested by impaired haematopoesis, bone metabolism, disorders of the digestive, cardiovascular and nervous system. Deficiency occurs in particular in patients suffering from malnutrition, malabsorption, great copper losses during administration of penicillamine. Sporadically copper intoxications are described (suicidal intentions or accidental ingestion of beverages with a high copper content). Acute exposure to copper containing dust is manifested by metal fume fever. Copper salts can produce local inflammations. Wilson's disease is associated with inborn impaired copper metabolism. In dialyzed patients possible contaminations of the dialyzate with copper must be foreseen as well as the possible release of copper from some dialyzation membranes. With the increasing amount of copper in the environment it is essential to monitor the contamination of the environment.

  8. Targeting copper in cancer therapy: 'Copper That Cancer'.

    Science.gov (United States)

    Denoyer, Delphine; Masaldan, Shashank; La Fontaine, Sharon; Cater, Michael A

    2015-11-01

    Copper is an essential micronutrient involved in fundamental life processes that are conserved throughout all forms of life. The ability of copper to catalyze oxidation-reduction (redox) reactions, which can inadvertently lead to the production of reactive oxygen species (ROS), necessitates the tight homeostatic regulation of copper within the body. Many cancer types exhibit increased intratumoral copper and/or altered systemic copper distribution. The realization that copper serves as a limiting factor for multiple aspects of tumor progression, including growth, angiogenesis and metastasis, has prompted the development of copper-specific chelators as therapies to inhibit these processes. Another therapeutic approach utilizes specific ionophores that deliver copper to cells to increase intracellular copper levels. The therapeutic window between normal and cancerous cells when intracellular copper is forcibly increased, is the premise for the development of copper-ionophores endowed with anticancer properties. Also under investigation is the use of copper to replace platinum in coordination complexes currently used as mainstream chemotherapies. In comparison to platinum-based drugs, these promising copper coordination complexes may be more potent anticancer agents, with reduced toxicity toward normal cells and they may potentially circumvent the chemoresistance associated with recurrent platinum treatment. In addition, cancerous cells can adapt their copper homeostatic mechanisms to acquire resistance to conventional platinum-based drugs and certain copper coordination complexes can re-sensitize cancer cells to these drugs. This review will outline the biological importance of copper and copper homeostasis in mammalian cells, followed by a discussion of our current understanding of copper dysregulation in cancer, and the recent therapeutic advances using copper coordination complexes as anticancer agents.

  9. Optimal design for mechanism parameters of crusher based on minimum eigenvalue by matlab%基于最小特性值的破碎机机构参数Matlab优化设计

    Institute of Scientific and Technical Information of China (English)

    黄大明; 蒋顺梅; 杨春兰

    2012-01-01

    破碎机机构尺寸参数的设计是决定产品性能优劣的关键.选择了量大面广的PE600×900鄂式破碎机产品为研究对象,通过建立以动颚行程特性值最小为目标函数的优化数学模型,利用Matlab优化工具箱中的序列二次规划(SQP)算法,采用直接调用fmincon函数的方式,实现有约束条件下的破碎机机构尺寸参数优化问题的求解.对研究对象的优化结果显示,破碎机排料口处行程特性值为2.47,减小21.84%.其中,垂直行程由56.80mm减少到55.24mm,水平行程由17.99mm增大到22.36mm.机构的运动特性得到改善.既能够有效减轻齿板磨损,又可以显著提高破碎比及生产能力.计算结果表明,产品的生产能力由原来的49.59 m3/h提高到55.04m3/h,提高了18.11%,且传动角依然满足45°≤γ≤55°的要求.此外,优化后的偏心距为18.5mm,略有减小,既不影响破碎物料必要的水平行程,使物料得以充分破碎,又降低了工作时作用在曲柄销轴上的阻力矩,减少功率的消耗,达到节能降耗的目的.因此,该优化达到产品产能大、效率高、寿命长、能耗低、品质好的预期目标.%The design of the crusher mechanism parameters is the key to determining product quality. This paper chooses the PE600x900 jaw crusher used extensively in the widespread production field as the research object,by establishing a optimization mathematical model with the minimum traveling eigenvalue of moving jaw as the objective function,making use of the sequential quadratic programming (SQP) algorithm of MATLAB optimal toolbox and adopting the way direct call fmincon function,the optimal solution of the crusher mechanism parameters could be found under constraint condition.The result of optimization shows that the output traveling eigenvalue of crusher is 2.47 and reduced by 21.84%.Thereinto, the vertical travel is reduced from 56.80mm to 55.24mm, the horizontal travel is increased from 17.99mm to 22.36mm

  10. LEP copper accelerating cavities

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    These copper cavities were used to generate the radio frequency electric field that was used to accelerate electrons and positrons around the 27-km Large Electron-Positron (LEP) collider at CERN, which ran from 1989 to 2000. The copper cavities were gradually replaced from 1996 with new superconducting cavities allowing the collision energy to rise from 90 GeV to 200 GeV by mid-1999.

  11. Copper wire bonding

    CERN Document Server

    Chauhan, Preeti S; Zhong, ZhaoWei; Pecht, Michael G

    2014-01-01

    This critical volume provides an in-depth presentation of copper wire bonding technologies, processes and equipment, along with the economic benefits and risks.  Due to the increasing cost of materials used to make electronic components, the electronics industry has been rapidly moving from high cost gold to significantly lower cost copper as a wire bonding material.  However, copper wire bonding has several process and reliability concerns due to its material properties.  Copper Wire Bonding book lays out the challenges involved in replacing gold with copper as a wire bond material, and includes the bonding process changes—bond force, electric flame off, current and ultrasonic energy optimization, and bonding tools and equipment changes for first and second bond formation.  In addition, the bond–pad metallurgies and the use of bare and palladium-coated copper wires on aluminum are presented, and gold, nickel and palladium surface finishes are discussed.  The book also discusses best practices and re...

  12. Analysis of the Wear Failure of Cone Crusher Liner at Dexing Copper Mine%德兴铜矿圆锥破碎机衬板的磨损失效分析

    Institute of Scientific and Technical Information of China (English)

    黄汝清; 江海燕; 麻日来; 张裕新; 吕振林; 周平安; 饶启昌

    2002-01-01

    根据德兴铜矿工况条件,对圆锥式破碎机衬板进行了磨损失效分析.SEM分析表明:凿削、切削与挤压(冲击)坑是其主要磨损方式;低周疲劳导致的疲劳剥落也是其失效形式之一,因此,对衬板材质的要求是:既要求具有很高的表面硬度,以抵抗矿石的凿削与切削,又要求具有很高的强度与韧性,以抵抗低周疲劳与冲击载荷.为此,选择高锰钢合金化,提高衬板的初始硬度和加工硬化速率,同时高锰钢的冶金、铸造及热处理质量的提高也是不可忽视的因素.

  13. Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2015-01-01

    Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

  14. Research on Cone Crusher Control System Based on Brain Emotion Learning Model%基于大脑情感学习模型的圆锥破碎机控制系统研究

    Institute of Scientific and Technical Information of China (English)

    杨国亮; 张丽; 程智林

    2012-01-01

    针对圆锥破碎机控制系统的大纯滞后系统不能高性能运行,提出了一种基于大脑情感学习模型(brain emotional learning,BEL)的新颖人工智能控制方法,具有学习能力强、计算简单等优点。BEL模型是基于大脑中杏仁体(amygdala)和眶额皮质(orbitofrontal)组织信息间传递方式的计算模型,简称A-O系统模型。学习主要发生在杏仁体中,而眶额皮质则对杏仁体内的学习过程起辅助作用。通过不断调整BEL模型的节点权值来达到最优控制效果。基于大脑情感学习模型的新智能控制器,应于圆锥破碎机控制系统,具有良好的反应速度和较强的鲁棒性。%According to low-performance operation of large and pure lag system of cone crusher control system,a new artificial control method based on brain emotional learning(BEL) model is proposed in this paper,which has great learning capability and can compute simply.BEL model is the computing model of delivery method between Amygdale of brain and Orbitofrontal organizational information,called A-O system model.The learning is mainly taking place in the Amygdale,and Orbitofrontal is assisting amygdale for learning.BEL model will reach the optimum control effect through constantly adjusting its node weights.The BEL intelligent controller is used to control cone crusher system and the simulation results show that the BEL controller has fast response speed and strong robustness.

  15. Copper and Copper Proteins in Parkinson’s Disease

    OpenAIRE

    Sergio Montes; Susana Rivera-Mancia; Araceli Diaz-Ruiz; Luis Tristan-Lopez; Camilo Rios

    2014-01-01

    Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson's disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson's disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased pr...

  16. Jiangxi Copper Plans to Increase its Refined Copper Output

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>According to news published on March 30th, China’s largest copper producer--Jiangxi Copper alleged in its 2010 Financial Report Statement that it plans to improve its output of refined copper by 4.4% in 2011, to increase from 900,000 tonnes last year to 940,000 tons.

  17. [Copper metabolism and genetic disorders].

    Science.gov (United States)

    Shimizu, Norikazu

    2016-07-01

    Copper is one of essential trace elements. Copper deficiency lead to growth and developmental failure and/or neurological dysfunction. However, excess copper is also problems for human life. There are two disorders of inborn error of copper metabolism, Menkes disease and Wilson disease. Menkes disease is an X linked recessive disorder with copper deficiency and Wilson disease is an autosomal recessive disorder with copper accumulation. These both disorders result from the defective functioning of copper transport P-type ATPase, ATP7A of Menkes disease and ATP7B of Wilson disease. In this paper, the author describes about copper metabolism of human, and clinical feature, diagnosis and treatment of Menkes disease and Wilson disease.

  18. 基于Pro/M的倾斜式破碎机偏心轴有限元结构分析%Finite element structural analysis for the eccentric shaft of low-profile crusher based on Pro/M

    Institute of Scientific and Technical Information of China (English)

    丁凌蓉

    2012-01-01

    The article described the methods and procedures of using Pro/M software for the finite-element structural analysis. A eccentric shaft of low-profile crusher (PEQ 400x600) was used as an example firstly to establish a three-dimensional solid model with Pro/ENGINEER Wildfire 2.0 software, then Pro/MECHANICA (Pro/M), the seamlessly integrated software, was used to perform the finite element structural analysis on the model for calibration of its strength and stiffness.%介绍运用Pro/M软件进行有限元结构分析的方法和步骤.以PEQ 400×600倾斜式破碎机偏心轴为例,运用Pro/ENGINEER Wildfire 2.0软件建立三维实体模型;再运用与其无缝集成的Pro/MECHANICA(Pro/M)软件对其进行有限元结构分析,校核其强度和刚度.

  19. Study on Tooth Crown Wear Resistance of the Single-roll Crusher for 120m2 Sintering Machine%120烧结单辊破碎机齿冠抗磨研究

    Institute of Scientific and Technical Information of China (English)

    谢福利; 马敬勋; 许强

    2011-01-01

    The tooth crown of the single-roll crusher at the end of the sintering machine has a very short service life. It is one of the technical difficulties to restrict the sintering process. Owing to poor working conditions, the tooth crown has less than 5 months in average of service life. By analyzing the tooth crown load, failure effect and the factor affecting the wear resistance of high chromium cast iron, it puts forward the roll tooth structure optimization and tooth profile improvement to prolong the service life of the tooth crown.%烧结机尾部的单辊破碎机齿冠使用寿命过短是制约烧结工艺的技术难题之一。由于工作环境恶劣破碎机齿冠平均使用寿命不到5个月。通过分析齿冠受力情况、失效特征及影响高铬铸铁抗磨性能的各方面原因,提出了优化辊齿结构和改进齿形的方法,实施后提高了破碎机齿辊使用寿命。

  20. Computer Analysis and Simulation of Claw Wear Mechanism of Claw Crusher Based on ANSYS%基于ANSYS粉碎机齿爪磨损的计算机分析及仿真

    Institute of Scientific and Technical Information of China (English)

    房泽鑫; 张宗超; 张进凯; 贾振超; 慈文亮; 陈宁

    2015-01-01

    针对不锈钢齿爪粉碎机的齿爪磨损过快、影响设备使用寿命和物料粉碎效果的问题,研究了齿爪磨损机理;并基于ANSYS Workbench仿真分析了齿爪的应力-应变及疲劳寿命。分析结果表明,齿爪失效的主要原因是周期性载荷作用导致的塑性变形和疲劳剥落。%The present study probed into existing problems of the stainless steel claw crusher, including equipment service life and material crushing efficiency influenced by too fast claw abrasion, investigated the mechanism of claw abrasion, and analyzed the stress-strain behavior and fatigue life of claw. The analysis results demonstrated that the main reasons for claw losing efficacy were periodic loading-induced plastic deformation and fatigue spalling.

  1. The crusher leaf's round of the sign type PL-1200 wears away a processing%PL-1200立式破碎机叶轮磨损修复

    Institute of Scientific and Technical Information of China (English)

    高卫东; 廖全秀

    2014-01-01

    The PL-1200 sign the stalk impact type crusher a leaf the round easily wears away in the long-term, the high-speed operation the movement the process. Pass a round the analysis of the essence composition to the leaf, experiment according to many times, obtain a data. This text put forward to wear away leaf's round to repair a new method in adopting the method foundation of the tradition repair. That method is opposite in past, since lowered repair cost, and then prolonged the maintenance period of equipments.%PL-1200立轴冲击式破碎机叶轮在长期、高速运转运行过程中容易磨损。通过对叶轮本体成分的分析,根据多次试验,获取数据。本文在采用传统修复方法基础上,提出了磨损叶轮修复新方法。该方法相对于以前,既降低了修复成本,又延长了设备的维护周期。

  2. 环锤式破碎机转子系统临界转速与不平衡响应分析%Analysis on critical speed and imbalance response of rotor system in ring hammer crusher

    Institute of Scientific and Technical Information of China (English)

    胡茂欣; 程珩

    2013-01-01

    不平衡是旋转机械的主要故障之一,针对环锤式破碎机锤头磨损后产生的不平衡问题,建立转子系统三维模型,利用有限元分析软件对转子系统进行临界转速与不平衡响应分析,得到转子系统的各阶临界转速与各种不平衡状态下的响应情况,并将分析结果运用到配锤中来,为下一步进行动平衡优化研究提供了一定的依据.%Imbalance is one of the main faults of rotating machinery.In view of imbalance caused by wearing of hammer of ring hammer crusher,a 3D model of the rotor system was established.In addition,a finite element analysis sogtware was used to analyze the critical speed and imbalance response of the rotor system,and the critical speed of each order of the rotor system and response at various imbalance mode were obtained.Finally,the analysis results was applied to hammer arrangement,which offered references for further study of dynamic balance optimization.

  3. Chinese Copper Manufacturers Expand Overseas

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>In 2012,China’s apparent copper consumption reached 8.84 million tons,accounting for 43%of the global total demand.Spurred by strong demand,China’s copper smelting capacity roars with annual average growth in domestic copper smelting capacity reaching approx-

  4. Fabrication and Characterization of Metallic Copper and Copper Oxide Nanoflowers

    Directory of Open Access Journals (Sweden)

    *H. S. Virk

    2011-12-01

    Full Text Available Copper nanoflowers have been fabricated using two different techniques; electro-deposition of copper in polymer and anodic alumina templates, and cytyltrimethal ammonium bromide (CTAB-assisted hydrothermal method. Scanning Electron Microscope (SEM images record some interesting morphologies of metallic copper nanoflowers. Field Emission Scanning Electron Microscope (FESEM has been used to determine morphology and composition of copper oxide nanoflowers. X-ray diffraction (XRD pattern reveals the monoclinic phase of CuO in the crystallographic structure of copper oxide nanoflowers. There is an element of random artistic design of nature, rather than science, in exotic patterns of nanoflowers fabricated in our laboratory.

  5. Copper and Copper Proteins in Parkinson’s Disease

    Directory of Open Access Journals (Sweden)

    Sergio Montes

    2014-01-01

    Full Text Available Copper is a transition metal that has been linked to pathological and beneficial effects in neurodegenerative diseases. In Parkinson’s disease, free copper is related to increased oxidative stress, alpha-synuclein oligomerization, and Lewy body formation. Decreased copper along with increased iron has been found in substantia nigra and caudate nucleus of Parkinson’s disease patients. Copper influences iron content in the brain through ferroxidase ceruloplasmin activity; therefore decreased protein-bound copper in brain may enhance iron accumulation and the associated oxidative stress. The function of other copper-binding proteins such as Cu/Zn-SOD and metallothioneins is also beneficial to prevent neurodegeneration. Copper may regulate neurotransmission since it is released after neuronal stimulus and the metal is able to modulate the function of NMDA and GABA A receptors. Some of the proteins involved in copper transport are the transporters CTR1, ATP7A, and ATP7B and the chaperone ATOX1. There is limited information about the role of those biomolecules in the pathophysiology of Parkinson’s disease; for instance, it is known that CTR1 is decreased in substantia nigra pars compacta in Parkinson’s disease and that a mutation in ATP7B could be associated with Parkinson’s disease. Regarding copper-related therapies, copper supplementation can represent a plausible alternative, while copper chelation may even aggravate the pathology.

  6. Industrial experiment of copper electrolyte purification by copper arsenite

    Institute of Scientific and Technical Information of China (English)

    ZHENG Ya-jie; XIAO Fa-xin; WANG Yong; LI Chun-hua; XU Wei; JIAN Hong-sheng; MA Yut-ian

    2008-01-01

    Copper electrolyte was purified by copper arsenite that was prepared with As2O3. And electrolysis experiments of purified electrolyte were carried out at 235 and 305 A/m2, respectively. The results show that the yield of copper arsenite is up to 98.64% when the molar ratio of Cu to As is 1.5 in the preparation of copper arsenite. The removal rates of Sb and Bi reach 74.11% and 65.60% respectively after copper arsenite is added in electrolyte. The concentrations of As, Sb and Bi in electrolyte nearly remain constant during electrolysis of 13 d. The appearances of cathode copper obtained at 235 and 305 A/m2 are slippery and even, and the qualification rate is 100% according to the Chinese standard of high-pure cathode copper(GB/T467-97).

  7. Precursors for formation of copper selenide, indium selenide, copper indium diselenide, and/or copper indium gallium diselenide films

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, Calvin J; Miedaner, Alexander; Van Hest, Maikel; Ginley, David S

    2014-11-04

    Liquid-based precursors for formation of Copper Selenide, Indium Selenide, Copper Indium Diselenide, and/or copper Indium Galium Diselenide include copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent. These liquid-based precursors can be deposited in liquid form onto substrates and treated by rapid thermal processing to form crystalline copper selenide and indium selenide films.

  8. The Effect of Copper

    African Journals Online (AJOL)

    higher (p<0.05) in the broodfish fed CSD0 and CSD1 diets than the other diets. Exposure of Clarias gariepinus fish to copper in water, at concentrations above 1.0mg CuSO4/g elicits adverse ... introduction of a toxicant to an aquatic system ..... Toxicity of four commonly used agrochemicals on. Oreochromis niloticus (L) fry.

  9. Presenilin promotes dietary copper uptake.

    Directory of Open Access Journals (Sweden)

    Adam Southon

    Full Text Available Dietary copper is essential for multicellular organisms. Copper is redox active and required as a cofactor for enzymes such as the antioxidant Superoxide Dismutase 1 (SOD1. Copper dyshomeostasis has been implicated in Alzheimer's disease. Mutations in the presenilin genes encoding PS1 and PS2 are major causes of early-onset familial Alzheimer's disease. PS1 and PS2 are required for efficient copper uptake in mammalian systems. Here we demonstrate a conserved role for presenilin in dietary copper uptake in the fly Drosophila melanogaster. Ubiquitous RNA interference-mediated knockdown of the single Drosophila presenilin (PSN gene is lethal. However, PSN knockdown in the midgut produces viable flies. These flies have reduced copper levels and are more tolerant to excess dietary copper. Expression of a copper-responsive EYFP construct was also lower in the midgut of these larvae, indicative of reduced dietary copper uptake. SOD activity was reduced by midgut PSN knockdown, and these flies were sensitive to the superoxide-inducing chemical paraquat. These data support presenilin being needed for dietary copper uptake in the gut and so impacting on SOD activity and tolerance to oxidative stress. These results are consistent with previous studies of mammalian presenilins, supporting a conserved role for these proteins in mediating copper uptake.

  10. Comparative characteristics of copper, copper chloride, and copper bromide vapor lasers

    Energy Technology Data Exchange (ETDEWEB)

    Kazarian, M.A.; Petrash, G.G.; Trofimov, A.N.

    1980-03-01

    The paper reports the results of a comparative study of copper and copper halide vapor lasers emitting in a repetitively-pulsed regime. Copper chloride and copper bromide vapor lasers are found to have identical lasing characteristics under any excitation conditions. These characteristics are different from those of a copper vapor laser. An average lasing power of 13 W has been obtained for all lasers studied for an efficiency of 1%. It is shown that the choice of a laser will largely depend on the laser design suitability for a specific application.

  11. Production of ultrahigh purity copper using waste copper nitrate solution.

    Science.gov (United States)

    Choi, J Y; Kim, D S

    2003-04-25

    The production of ultrahigh purity copper (99.9999%) by electrolysis in the presence of a cementation barrier has been attempted employing a waste nitric copper etching solution as the electrolyte. The amount of copper deposited on the cathode increased almost linearly with electrolysis time and the purity of copper was observed to increase as the electrolyte concentration was increased. At some point, however, as the electrolyte concentration increased, the purity of copper decreased slightly. As the total surface area of cementation barrier increased, the purity of product increased. The electrolyte temperature should be maintained below 35 degrees C in the range of investigated electrolysis conditions to obtain the ultrahigh purity copper. Considering that several industrial waste solutions contain valuable metallic components the result of present study may support a claim that electrowinning is a very desirable process for their treatment and recovery.

  12. Tongling:Copper Industry Giant Takes Shape

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>Centering on the strategic goal of building "World Copper Capital", Tongling constantly extends its product lines and improves the copper industry chain. Now, the copper industry with a production value of RMB 100 billion has taken shape.As the largest copper wire rod manufacturer in Asia, Tongling Quanwei Copper Technologies Co., Ltd., upon its moving into the local market,

  13. 基于单片机控制的香蕉秸秆粉碎机的设计%Research of Banana Stalk Crusher Based on Single Chip Microcomputer Control

    Institute of Scientific and Technical Information of China (English)

    张慧; 张燕

    2014-01-01

    In the production process of the banana planting , rational utilization of banana straw has become an important part of the banana industry , scale development .Banana planting industry in our country has been using the traditional manual processing of straw , which is a very hard work ,which requires a lot of manpower and greatly reduce the labor in-tensity of workers and improve the production efficiency .Therefore , there will be designed to provide a banana stalk crusher and a kind of efficient , practical set cutting , crushing one .The machine based on single chip microcomputer is full automatic control ,pressure sensor and step motor to realize the reasonable step motion , can better solve the problem of banana stalk crushing .%在香蕉种植生产过程中,香蕉秸秆的合理利用成为了香蕉产业化、规模化发展的重要组成部分。我国香蕉种植业一直采用传统的人工方式处理秸秆,既耗费大量的人力物力,又大大降低了生产效率且工人劳动强度高。为此,设计一种效率较高、实用性较强的集切割、粉碎一体的香蕉秸秆粉碎机。该机械基于单片机进行全程自动控制,压力传感器与步进电机合理配合实现各运动,能较好地解决香蕉秸秆粉碎的处理问题。

  14. A Method to Determine the Ball Filling, in Miduk Copper Concentrator SAG Mill

    Directory of Open Access Journals (Sweden)

    Ali Kamali Moaveni

    2012-12-01

    Full Text Available The aim of this research work was to investigate on the ball filling estimation of Miduk semi-autogenous (SAG Mill via an utilized method. Miduk copper concentrator is located in Kerman Province, Iran, and its size reduction stage includes one gyratory crusher which feeds one SAG mill (9.75 dia.(m*3.88 length(m following two parallel ball mills (5dia.(m*7lenght(m. After SAG mill, a trommel screen produces two over and under size materials which the oversize part is circulated into SAG mill and undersize reports to hydrocyclone for further process. Ball filling identify was implemented in this work using mill`s load sampling and ball abrasion test.These methods could estimate ball filling variation with easy, undeniable, and useful tests. Also, these tests have shown the digression of operating ball filling amount and its manual designed. To make more homogenous load, mill load samplings were carried out from 6 points after whirling the mill via inching motor. Acquired load sampling results were compared with ball abrasion tests. Ball abrasion tests were calculated for 3 different conditions include maximum, average, and minimum ball abrasion. However, the calculated maximum and minimum conditions never occurred. However, these are just for obtaining to ball filling variation in the mill. The results obtained from this work show, the ball filling percentage variation is between 1.2– 3.7% which is lower than mill ball filling percentage, according to the designed conditions (15%. In addition, acquired load samplings result for mill ball filling was 1.3%.

  15. Direct Production of Copper

    Science.gov (United States)

    Victorovich, G. S.; Bell, M. C.; Diaz, C. M.; Bell, J. A. E.

    1987-09-01

    The use of commercially pure oxygen in flash smelting a typical chalcopyrite concentrate or a low grade comminuted matte directly to copper produces a large excess of heat. The heat balance is controlled by adjusting the calorific value of the solid feed. A portion of the sulfide material is roasted to produce a calcine which is blended with unroasted material, and the blend is then autogeneously smelted with oxygen and flux directly to copper. Either iron silicate or iron calcareous slags are produced, both being subject to a slag cleaning treatment. Practically all of the sulfur is contained in a continuous stream of SO2 gas, most of which is strong enough for liquefaction. A particularly attractive feature of these technologies is that no radically new metallurgical equipment needs to be developed. The oxygen smelting can be carried out not only in the Inco type flash furnace but in other suitable smelters such as cyclone furnaces. Another major advantage stems from abolishion of the ever-troublesome converter aisle, which is replaced with continuous roasting of a fraction of the copper sulfide feed.

  16. Mechanochemical reactions on copper-based compounds

    NARCIS (Netherlands)

    Castricum, H.L.; Bakker, H.; Poels, E.K.

    1999-01-01

    Mechanochemical reactions of copper and copper oxides with oxygen and carbon dioxide are discussed, as well as decomposition and reduction of copper compounds by mechanical milling under high-vacuum conditions.

  17. Oxidation Mechanism of Copper Selenide

    Science.gov (United States)

    Taskinen, Pekka; Patana, Sonja; Kobylin, Petri; Latostenmaa, Petri

    2014-09-01

    The oxidation mechanism of copper selenide was investigated at deselenization temperatures of copper refining anode slimes. The isothermal roasting of synthetic, massive copper selenide in flowing oxygen and oxygen - 20% sulfur dioxide mixtures at 450-550 °C indicate that in both atmospheres the mass of Cu2Se increases as a function of time, due to formation of copper selenite as an intermediate product. Copper selenide oxidises to copper oxides without formation of thick copper selenite scales, and a significant fraction of selenium is vaporized as SeO2(g). The oxidation product scales on Cu2Se are porous which allows transport of atmospheric oxygen to the reaction zone and selenium dioxide vapor to the surrounding gas. Predominance area diagrams of the copper-selenium system, constructed for selenium roasting conditions, indicate that the stable phase of copper in a selenium roaster gas with SO2 is the sulfate CuSO4. The cuprous oxide formed in decomposition of Cu2Se is further sulfated to CuSO4.

  18. Copper and copper-nickel-alloys - An overview

    Energy Technology Data Exchange (ETDEWEB)

    Klassert, Anton; Tikana, Ladji [Deutsches Kupferinstitut e.V. Am Bonneshof 5, 40474 Duesseldorf (Germany)

    2004-07-01

    With the increasing level of industrialization the demand for and the number of copper alloys rose in an uninterrupted way. Today, the copper alloys take an important position amongst metallic materials due to the large variety of their technological properties and applications. Nowadays there exist over 3.000 standardized alloys. Copper takes the third place of all metals with a worldwide consumption of over 15 millions tons per year, following only to steel and aluminum. In a modern industrial society we meet copper in all ranges of the life (electro-technology, building and construction industry, mechanical engineering, automotive, chemistry, offshore, marine engineering, medical applications and others.). Copper is the first metal customized by humanity. Its name is attributed to the island Cyprus, which supplied in the antiquity copper to Greece, Rome and the other Mediterranean countries. The Romans called it 'ore from Cyprus' (aes cyprium), later cuprum. Copper deposited occasionally also dapper and could be processed in the recent stone age simply by hammering. Already in early historical time copper alloys with 20 to 50 percent tin was used for the production of mirrors because of their high reflecting power. Although the elementary nickel is an element discovered only recently from a historical perspective, its application in alloys - without any knowledge of the alloy composition - occurred at least throughout the last 2.000 years. The oldest copper-nickel coin originates from the time around 235 B.C.. Only around 1800 AD nickel was isolated as a metallic element. In particular in the sea and offshore technology copper nickel alloys found a broad field of applications in piping systems and for valves and armatures. The excellent combination of characteristics like corrosion resistance, erosion stability and bio-fouling resistance with excellent mechanical strength are at the basis of this success. An experience of many decades supports the use

  19. Removal of copper from ferrous scrap

    Science.gov (United States)

    Blander, Milton; Sinha, Shome N.

    1990-01-01

    A process for removing copper from ferrous or other metal scrap in which the scrap is contacted with a polyvalent metal sulfide slag in the presence of an excess of copper-sulfide forming additive to convert the copper to copper sulfide which is extracted into the slag to provide a ratio of copper in the slag to copper in the metal scrap of at least about 10.

  20. Variations of serum copper values in pregnancy

    OpenAIRE

    Vukelić Jelka; Kapamadžija Aleksandra; Petrović Đorđe; Grujić Zorica; Novakov-Mikić Aleksandra; Kopitović Vesna; Bjelica Artur

    2012-01-01

    Introduction. Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. Objective. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathol...

  1. Nickel, copper and cobalt coalescence in copper cliff converter slag

    Directory of Open Access Journals (Sweden)

    Wolf A.

    2016-01-01

    Full Text Available The aim of this investigation is to assess the effect of various additives on coalescence of nickel, copper and cobalt from slags generated during nickel extraction. The analyzed fluxes were silica and lime while examined reductants were pig iron, ferrosilicon and copper-silicon compound. Slag was settled at the different holding temperatures for various times in conditions that simulated the industrial environment. The newly formed matte and slag were characterized by their chemical composition and morphology. Silica flux generated higher partition coefficients for nickel and copper than the addition of lime. Additives used as reducing agents had higher valuable metal recovery rates and corresponding partition coefficients than fluxes. Microstructural studies showed that slag formed after adding reductants consisted of primarily fayalite, with some minute traces of magnetite as the secondary phase. Addition of 5 wt% of pig iron, ferrosilicon and copper-silicon alloys favored the formation of a metallized matte which increased Cu, Ni and Co recoveries. Addition of copper-silicon alloys with low silicon content was efficient in copper recovery but coalescence of the other metals was low. Slag treated with the ferrosilicon facilitated the highest cobalt recovery while copper-silicon alloys with silicon content above 10 wt% resulted in high coalescence of nickel and copper, 87 % and 72 % respectively.

  2. Study of Copper Substitute in High Copper Price Market Environment

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>The high price of copper drives up industry cost,also it is difficult for terminal products to raise price to transfer the cost pressure brought by increase in copper price,as a result downstream consumption markets instead try to seek

  3. Fixation Property of Copper Triazole Wood Preservatives

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    According to AWPA E11-2006 standard,copper fixation rates of several copper-based formulations,such as ammoniacal copper,amine copper,and ammoniacal-ethanolamine copper,as well as alkaline copper quaternary(ACQ),were tested and compared in this paper.And the fixation rates of tebuconazole(TEB) and propiconazole(PPZ) in several formulations,such as copper azole,emulsified type and solvent type,were also compared.The determination of copper content in the leachate was analyzed by atomic absorption spectrom...

  4. INTERACTION OF COPPER BASED PRESERVATIVES WITH WOOD

    Directory of Open Access Journals (Sweden)

    Ali Temiz

    2004-11-01

    Full Text Available Copper is highly toxic to fungi and the element is widely used in many preservative formulations over 50 years. The interactions of wood and copper-based preservatives impact both the performance and the environment aspects of treated wood. Copper might be present in treated wood as coppercellulose complex, copper-lignin complex, and crystalline or amorphous inorganic/organic copper compounds. In this review; it was aimed to investigate the interactions of wood and copper-based preservatives, Copper Adsorpsion factors and copper forms in treated wood

  5. Electroleaching of Copper Waste with Recovery of Copper by Electrodialysis

    Directory of Open Access Journals (Sweden)

    Nuñez P.

    2013-04-01

    Full Text Available A new process to leach and recover copper from solid waste using electric fields was designed. The leaching with electro migration is presented as an alternative to traditional leaching. Preliminary data indicate that the copper ion migration is facilitated by using the electrical potential difference; therefore applying a potential difference in the processes of leaching facilitates the removal of copper. This is especially useful when mineral concentrations are very low. Different phenomena associated with transport of copper in solution are studied to generate a model able predict the state of the copper ion concentration in time. A kinetic model for the process was developed and fitted very well the experimental data.

  6. Synthesis of copper/copper oxide nanoparticles by solution plasma

    Science.gov (United States)

    Saito, Genki; Hosokai, Sou; Tsubota, Masakatsu; Akiyama, Tomohiro

    2011-07-01

    This paper describes the synthesis of copper/copper oxide nanoparticles via a solution plasma, in which the effect of the electrolyte and electrolysis time on the morphology of the products was mainly examined. In the experiments, a copper wire as a cathode was immersed in an electrolysis solution of a K2CO3 with the concentration from 0.001 to 0.50 M or a citrate buffer (pH = 4.8), and was melted by the local-concentration of current. The results demonstrated that by using the K2CO3 solution, we obtained CuO nanoflowers with many sharp nanorods, the size of which decreased with decreasing the concentration of the solution. Spherical particles of copper with/without pores formed when the citrate buffer was used. The pores in the copper nanoparticles appeared when the applied voltage changed from 105 V to 130 V, due to the dissolution of Cu2O.

  7. Studies of copper transport in mammalian cells using copper radioisotopes

    Energy Technology Data Exchange (ETDEWEB)

    Camakaris, J.; Voskoboinik, I.; Brooks, H.; Greenough, M. [University of Melbourne, Parkville, VIC (Australia). Department of Genetics; Smith, S. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia). Radiopharmaceuticals Division; Mercer, J. [Deakin University, Clayton, VIC (Australia). Centre of Cellular and Molecular Biology

    1998-12-31

    The trace element copper poses a major problem for all organisms. It is essential as a number of vital enzymes require it. Copper deficiency can lead to neurological disorders, osteoporosis and weakening of arteries. However Cu is also highly toxic and homeostatic mechanisms have evolved to maintain Cu at levels which satisfy requirements but do not cause toxicity. Toxicity is mediated by the oxidative capacity of Cu and its ability to generate toxic free radicals. There are several acquired and inherited diseases due to either Cu toxicity or Cu deficiency. The study of these diseases facilitates identification of genes and proteins involved in copper homeostasis, and this in turn will provide rational therapeutic approaches. Using the copper radioisotopes {sup 64}Cu (t1/2 = 12.8 hr) and {sup 67}Cu (t1/2 = 61 hr) we have developed a number of systems for studying copper transport in mammalian cells. These include investigation of copper uptake, copper efflux and ligand blot assays for Cu-binding proteins. Our studies have focused on Menkes disease which is an inherited and usually lethal copper deficiency disorder in humans. We have demonstrated that the Menkes protein is directly involved as a copper efflux pump in mammalian cells. Using cells overexpressing the Menkes protein we have provided the first biochemical evidence that this functions as a Cu translocating (across the membrane) P-type ATPase (Voskoboinik et al., FEBS Letters, in press). These studies were carried out using purified plasma membrane vesicles. We are now carrying out structure- function studies on this protein using targeted mutations and assaying using the radiocopper vesicle assay. Recently we have commenced studies on the role of amyloid precursor protein (APP) in copper transport and relationship of this to Alzheimers disease

  8. A Plasmodium falciparum copper-binding membrane protein with copper transport motifs

    OpenAIRE

    Choveaux David L; Przyborski Jude M; Goldring JP

    2012-01-01

    Abstract Background Copper is an essential catalytic co-factor for metabolically important cellular enzymes, such as cytochrome-c oxidase. Eukaryotic cells acquire copper through a copper transport protein and distribute intracellular copper using molecular chaperones. The copper chelator, neocuproine, inhibits Plasmodium falciparum ring-to-trophozoite transition in vitro, indicating a copper requirement for malaria parasite development. How the malaria parasite acquires or secretes copper st...

  9. Nanocrystalline copper based microcomposites

    OpenAIRE

    J.P. Stobrawa; Z.M. Rdzawski; W. Głuchowski; J. Domagała-Dubiel

    2012-01-01

    Purpose: The aim of this work was to investigate microstructure, mechanical properties and deformation behavior of copper microcomposites: Cu- Y2O3, Cu- ZrO2 and Cu-WC produced by powder metallurgy techniques.Design/methodology/approach: Tests were made with Cu-Y2O3, Cu-ZrO2 and Cu-WC microcomposites containing up to 2% of a strengthening phase. The materials were fabricated by powder metallurgy techniques, including milling of powders, followed by their compacting and sintering. The main mec...

  10. The Bauschinger Effect in Copper

    DEFF Research Database (Denmark)

    Pedersen, Ole Bøcker; Brown, L .M.; Stobbs, W. M.

    1981-01-01

    A study of the Bauschinger effect in pure copper shows that by comparison with dispersion hardened copper the effect is very small and independent of temperature. This suggests that the obstacles to flow are deformable. A simple composite model based on this principle accounts for the data semi...

  11. Effects of copper(II) and copper oxides on THMs formation in copper pipe.

    Science.gov (United States)

    Li, Bo; Qu, Jiuhui; Liu, Huijuan; Hu, Chengzhi

    2007-08-01

    Little is known about how the growth of trihalomethanes (THMs) in drinking water is affected in copper pipe. The formation of THMs and chlorine consumption in copper pipe under stagnant flow conditions were investigated. Experiments for the same water held in glass bottles were performed for comparison. Results showed that although THMs levels firstly increased in the presence of chlorine in copper pipe, faster decay of chlorine as compared to the glass bottle affected the rate of THMs formation. The analysis of water phase was supplemented by surface analysis of corrosion scales using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDX). The results showed the scales on the pipe surface mainly consisted of Cu(2)O, CuO and Cu(OH)(2) or CuCO(3). Designed experiments confirmed that the fast depletion of chlorine in copper pipe was mainly due to effect of Cu(2)O, CuO in corrosion scales on copper pipe. Although copper(II) and copper oxides showed effect on THMs formation, the rapid consumption of chlorine due to copper oxide made THM levels lower than that in glass bottles after 4h. The transformations of CF, DCBM and CDBM to BF were accelerated in the presence of copper(II), cupric oxide and cuprous oxide. The effect of pH on THMs formation was influenced by effect of pH on corrosion of copper pipe. When pH was below 7, THMs levels in copper pipe was higher as compared to glass bottle, but lower when pH was above 7.

  12. Copper: From neurotransmission to neuroproteostasis

    Directory of Open Access Journals (Sweden)

    Carlos M Opazo

    2014-07-01

    Full Text Available Copper is critical for the Central Nervous System (CNS development and function. In particular, different studies have shown the effect of copper at brain synapses, where it inhibits Long Term Potentation (LTP and receptor pharmacology. Paradoxically, according to recent studies copper is required for a normal LTP response. Copper is released at the synaptic cleft, where it blocks glutamate receptors, which explain its blocking effects on excitatory neurotransmission. Our results indicate that copper also enhances neurotransmission through the accumulation of PSD95 protein, which increase the levels of AMPA receptors located at the plasma membrane of the post-synaptic density. Thus, our findings represent a novel mechanism for the action of copper, which may have implications for the neurophysiology and neuropathology of the CNS. These data indicate that synaptic configuration is sensitive to transient changes in transition metal homeostasis. Our results suggest that copper increases GluA1 subunit levels of the AMPA receptor through the anchorage of AMPA receptors to the plasma membrane as a result of PSD-95 accumulation. Here, we will review the role of copper on neurotransmission of CNS neurons. In addition, we will discuss the potential mechanisms by which copper could modulate neuronal proteostasis (neuroproteostasis in the CNS with focus in the Ubiquitin Proteasome System, which is particularly relevant to neurological disorders such Alzheimer’s disease (AD where copper and protein dyshomeostasis may contribute to neurodegeneration. An understanding of these mechanisms may ultimately lead to the development of novel therapeutic approaches to control metal and synaptic alterations observed in AD patients.

  13. Jiangxi Copper Corporation Builds 900,000-Ton Copper Production Capacity

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The Eastward Refined Copper Expansion Pro- ject of Guixi Smelting Plant under Jiangxi Copper Corporation has output its first lot of Copper cathode,marking the company’s pos- session of a 900,000-ton copper production ca- pacity.Thus the company further strengthens its position as the top 3 of the copper world.

  14. Secondary Copper Industry Entered Rapid Growth Period

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    In China’s copper output,secondary copper accounts for about 40%,for power cable industry,the usage percentage of secondary copper is about 50%.Under the favorable policy of the government to vigorously support recycling industry,secondary copper rod enterprises begin to expand,and are confident toward the industry’s potentials.

  15. Unravelling the Chemical Nature of Copper Cuprizone

    OpenAIRE

    Messori, L.; Casini, A.; C.Gabbiani; Sorace, L.; Muniz-Miranda, M.; Zatta, P

    2007-01-01

    During the last 50 years, formation of the highly chromogenic copper cuprizone complex has been exploited for spectrophotometric determinations of copper although the precise chemical nature of the resulting species has never been ascertained; we eventually show here, in contrast to current opinion, that copper cuprizone is a copper(III) complex.

  16. Secondary Copper Consumption and Location in China

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> China is short of copper resources and is alsothe second largest copper consuming country inthe world.The way to overcome the contradic-tion between the resource shortage and fastgrowth in consumption is to import copper rawmaterial in large quantities.Since the 1990’s,China’s import quantity of copper scrap hasincreased considerably.During the last twoyears,China has imported copper scrap worthof US$2.25 billion,1.32 times of the value ofimported copper concentrates in the same pe-riod.China is one of the biggest copper scrap

  17. An Introduction to Copper Deposits in China

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    There are 11 genetic types of copper deposit in China, three of which (porphyry,contact metasomatic and VMS types) are the most important. The copper deposits distribute widely both temporally and spatially in China. The features of copper ores in China are mostly poor in copper tenor and complex in metal associated. The copper metallogeny in China predominantly occurs in three metallogenic megadomains, namely the circum-Pacific, the paleo-Asian and the Tethys-Himalayan.

  18. Formation of copper-indium-selenide and/or copper-indium-gallium-selenide films from indium selenide and copper selenide precursors

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, Calvin J [Lakewood, CO; Miedaner, Alexander [Boulder, CO; Van Hest, Maikel [Lakewood, CO; Ginley, David S [Evergreen, CO; Nekuda, Jennifer A [Lakewood, CO

    2011-11-15

    Liquid-based indium selenide and copper selenide precursors, including copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent, are used to form crystalline copper-indium-selenide, and/or copper indium gallium selenide films (66) on substrates (52).

  19. The Revovery of Copper and Cobalt from Oxidized Copper Ore and Converter Slag

    OpenAIRE

    ZİYADANOĞULLARI, Berrin; ZİYADANOĞULLARI, Recep

    1999-01-01

    The aim of this study was to develop a method for obtaining copper and cobalt from oxidized copper ore and converter slag. In order to convert the copper and cobalt into sulfate compounds the main step was to roast the samples obtained by sulfurization and transfer the samples into solution. First the oxidized copper ore was roasted, followed by the mixture of converter slag and oxidized copper ore. Since the levels of copper and cobalt were low, the sulfurization process was carri...

  20. Genome Sequences of Two Copper-Resistant Escherichia coli Strains Isolated from Copper-Fed Pigs

    DEFF Research Database (Denmark)

    Lüthje, Freja L.; Hasman, Henrik; Aarestrup, Frank Møller;

    2014-01-01

    The draft genome sequences of two copper-resistant Escherichia coli strains were determined. These had been isolated from copper-fed pigs and contained additional putative operons conferring copper and other metal and metalloid resistances.......The draft genome sequences of two copper-resistant Escherichia coli strains were determined. These had been isolated from copper-fed pigs and contained additional putative operons conferring copper and other metal and metalloid resistances....

  1. Majorana Electroformed Copper Mechanical Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Overman, Nicole R.; Overman, Cory T.; Kafentzis, Tyler A.; Edwards, Danny J.; Hoppe, Eric W.

    2012-04-30

    The MAJORANA DEMONSTRATOR is a large array of ultra-low background high-purity germanium detectors, enriched in 76Ge, designed to search for zero-neutrino double-beta decay. The DEMONSTRATOR will utilize ultra high purity electroformed copper for a variety of detector components and shielding. A preliminary mechanical evaluation was performed on the Majorana prototype electroformed copper material. Several samples were removed from a variety of positions on the mandrel. Tensile testing, optical metallography, scanning electron microscopy, and hardness testing were conducted to evaluate mechanical response. Analyses carried out on the Majorana prototype copper to this point show consistent mechanical response from a variety of test locations. Evaluation shows the copper meets or exceeds the design specifications.

  2. Hereditary iron and copper deposition

    DEFF Research Database (Denmark)

    Aaseth, Jan; Flaten, Trond Peder; Andersen, Ole

    2007-01-01

    can be successfully treated, emphasizing the importance of early diagnosis. Serum ferritin values, transferrin saturation and genetic analysis are used when diagnosing haemochromatosis. The diagnostics of Wilson's disease depends on the use of urinary copper values, serum ceruloplasmin and liver...

  3. Use of copper radioisotopes in investigating disorders of copper metabolism

    Energy Technology Data Exchange (ETDEWEB)

    Camakaris, J.; Voskoboinik, I.; Brooks, H.; Greenough, M. [University of Melbourne, Parkville, VIC (Australia). Department of Genetics; Smith, S. [Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, NSW (Australia). Radiopharmaceuticals Division; Mercer, J. [Deakin University, Rusden Campus, Clayton, VIC (Australia). Centre of Cellular and Molecular Biology

    1998-12-31

    Full text: Copper is an essential trace element for life as a number of vital enzymes require it. Copper deficiency can lead to neurological disorders, osteoporosis and weakening of arteries. However Cu is also highly toxic and homeostatic mechanisms have evolved to maintain Cu at levels which satisfy requirements but do not cause toxicity. Toxicity is mediated by the oxidative capacity of Cu and its ability to generate toxic free radicals. There are several acquired and inherited diseases due to either Cu toxicity or Cu deficiency. The study of these diseases facilitates identification of genes and proteins involved in copper homeostasis, and this in turn will provide rational therapeutic approaches. Our studies have focused on Menkes disease in humans which is an inherited and usually lethal copper deficiency. Using copper radioisotopes {sup 64}Cu (t 1/2 = 12.8 hr) and {sup 67}Cu (t 1/2 = 61 hr) we have studied the protein which is mutated in Menkes disease. This is a transmembrane copper pump which is responsible for absorption of copper into the body and also functions to pump out excess Cu from cells when Cu is elevated. It is therefore a vital component of normal Cu homeostasis. We have provided the first biochemical evidence that the Menkes protein functions as a P-type ATPase Cu pump (Voskoboinik et al., FEBS Letters, in press) and these data will be discussed. The assay involved pumping of radiocopper into purified membrane vesicles. Furthermore we have transfected normal and mutant Menkes genes into cells and are carrying out structure-function studies. We are also studying the role of amyloid precursor protein (APP) as a Cu transport protein in order to determine how Cu regulates this protein and its cleavage products. These studies will provide vital information on the relationship between Cu and APP and processes which lead to Alzheimers disease

  4. Improving Beneficiation of Copper and Iron from Copper Slag by Modifying the Molten Copper Slag

    Directory of Open Access Journals (Sweden)

    Zhengqi Guo

    2016-04-01

    Full Text Available In the paper, a new technology was developed to improve the beneficiation of copper and iron components from copper slag, by modifying the molten slag to promote the mineralization of valuable minerals and to induce the growth of mineral grains. Various parameters, including binary basicity, dosage of compound additive, modification temperature, cooling rate and the end point temperature of slow cooling were investigated. Meanwhile, optical microscope, scanning electron microscope and energy dispersive spectrometer (SEM-EDS was employed to determine the mineralogy of the modified and unmodified slag, as well as to reveal the mechanisms of enhancing beneficiation. The results show that under the proper conditions, the copper grade of rougher copper concentrate was increased from 6.43% to 11.04%, iron recovery of magnetic separation was increased significantly from 32.40% to 63.26%, and other evaluation indexes were changed slightly, in comparison with unmodified copper slag. Moreover, matte and magnetite grains in the modified slag aggregated together and grew obviously to the mean size of over 50 μm, resulting in an improvement of beneficiation of copper and iron.

  5. Renal cortex copper concentration in acute copper poisoning in calves

    Directory of Open Access Journals (Sweden)

    Luis E. Fazzio

    2012-01-01

    Full Text Available The aim of this study was to estimate the diagnostic value of renal cortex copper (Cu concentration in clinical cases of acute copper poisoning (ACP. A total of 97 calves that died due to subcutaneous copper administration were compiled in eleven farms. At least, one necropsy was conducted on each farm and samples for complementary analysis were taken. The degree of autolysis in each necropsy was evaluated. The cases appeared on extensive grazing calf breeding and intensive feedlot farms, in calves of 60 to 200 kg body weight. Mortality varied from 0.86 to 6.96 %, on the farms studied. The first succumbed calf was found on the farms between 6 and 72 hours after the susbcutaneous Cu administration. As discrepancies regarding the reference value arose, the local value (19.9 parts per million was used, confirming the diagnosis of acute copper poisoning in 93% of the analyzed kidney samples. These results confirm the value of analysis of the cortical kidney Cu concentration for the diagnosis of acute copper poisoning.

  6. Copper metallurgy at the crossroads

    Directory of Open Access Journals (Sweden)

    Habashi F.

    2007-01-01

    Full Text Available Copper technology changed from the vertical to the horizontal furnace and from the roast reaction to converting towards the end of the last century. However, the horizontal furnace proved to be an inefficient and polluting reactor. As a result many attempts were made to replace it. In the past 50 years new successful melting processes were introduced on an industrial scale that were more energy efficient and less polluting. In addition, smelting and converting were conducted in a single reactor in which the concentrate was fed and the raw copper was produced. The standing problem in many countries, however, is marketing 3 tonnes of sulfuric acid per tonne of copper produced as well as emitting large amounts of excess SO2 in the atmosphere. Pressure hydrometallurgy offers the possibility of liberating the copper industry from SO2 problem. Heap leaching technology has become a gigantic operation. Combined with solvent extraction and electrowinning it contributes today to about 20% of copper production and is expected to grow. Pressure leaching offers the possibility of liberating the copper industry from SO2 problem. The technology is over hundred years old. It is applied for leaching a variety of ores and concentrates. Hydrothermal oxidation of sulfide concentrates has the enormous advantage of producing elemental sulfur, hence solving the SO2 and sulfuric acid problems found in smelters. Precipitation of metals such as nickel and cobalt under hydrothermal conditions has been used for over 50 years. It has the advantage of a compact plant but the disadvantage of producing ammonium sulfate as a co-product. In case of copper, however, precipitation takes place without the need of neutralizing the acid, which is a great advantage and could be an excellent substitute for electrowinning which is energy intensive and occupies extensive space. Recent advances in the engineering aspects of pressure equipment design open the door widely for increased

  7. 21 CFR 73.1125 - Potassium sodium copper chloropyhllin (chlorophyllin-copper complex).

    Science.gov (United States)

    2010-04-01

    ... (chlorophyllin-copper complex). 73.1125 Section 73.1125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT....1125 Potassium sodium copper chloropyhllin (chlorophyllin-copper complex). (a) Identity. (1) The color additive potassium sodium copper chlorophyllin is a green to black powder obtained from chlorophyll...

  8. 21 CFR 73.2125 - Potassium sodium copper chlorophyllin (chlorophyllin-copper complex).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Potassium sodium copper chlorophyllin (chlorophyllin-copper complex). 73.2125 Section 73.2125 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT... § 73.2125 Potassium sodium copper chlorophyllin (chlorophyllin-copper complex). (a) Identity...

  9. Testing Corrosion Inhibitors for the Conservation of Archaeological Copper and Copper Alloys

    Directory of Open Access Journals (Sweden)

    Robert B. Faltermeier

    1997-11-01

    Full Text Available This is a synopsis of the Ph.D. research undertaken at the Institute of Archaeology, University College London. The aim was to evaluate corrosion inhibitors for use in the conservation of copper and copper alloy archaeological artefacts. The objective of this work was to acquire an insight into the performance of copper corrosion inhibitors, when applied to archaeological copper.

  10. The link between copper and Wilson's disease.

    Science.gov (United States)

    Purchase, Rupert

    2013-01-01

    Wilson's disease (hepatolenticular degeneration) is a rare inherited autosomal recessive disorder of copper metabolism leading to copper accumulation in the liver and extrahepatic organs such as the brain and cornea. Patients may present with combinations of hepatic, neurological and psychiatric symptoms. Copper is the therapeutic target for the treatment of Wilson's disease. But how did copper come to be linked with Wilson's disease? The answer encompasses a study of enzootic neonatal ataxia in lambs in the 1930s, the copper-chelating properties of British Anti-Lewisite, and the chemical analysis for copper of the organs of deceased Wilson's disease patients in the mid-to-late 1940s. Wilson's disease is one of a number of copper-related disorders where loss of copper homeostasis as a result of genetic, nutritional or environmental factors affects human health.

  11. Determination of copper in clarified apple juices.

    Science.gov (United States)

    Zeiner, Michaela; Juranović Cindrić, Iva; Kröppl, Michaela; Stingeder, Gerhard

    2010-03-24

    Inorganic copper compounds are not considered as synthetic fertilizers for apple trees as they are traditional fertilizers. Thus, they are used in organic farming for soil or foliar applications. The European Union is for health reasons interested in reducing copper in apple orchards. Because the fertilizer application rate affects the nutrition of apples, the applied copper might also be reflected in the copper concentration of apple juices. Thus, the determination of copper is of concern for investigating the application of copper-containing fertilizers. Samples of clarified apple juice commercially available in the European market were analyzed for their copper content. Prior to quantification by inductively coupled plasma-optical emission spectrometry, the juices were processed by a microwave-assisted digestion system using HNO(3). All samples were also measured directly after dilution with HNO(3). The copper concentrations measured using both methods were all below the limit of detection (17 microg/L).

  12. Synthesis of aminoarenethiolato-copper(I) complexes

    NARCIS (Netherlands)

    Sperotto, E.; van Klink, G.P.M.; van Koten, G.

    2008-01-01

    Copper(I)-mediated reactions have recently become the choice for large industrial scale applications, since copper is environmentally friendly and cheaper than other transition metals already explored. However, most organocopper compounds still present several limitations including the sensitivity t

  13. Global assessment of undiscovered copper resources

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Deposits, prospects, and permissive tracts for porphyry and sediment-hosted copper resources worldwide, with estimates of undiscovered copper resources. pCu_tracts...

  14. EFFECT OF COPPER ON PASSIVITY AND CORROSION ...

    African Journals Online (AJOL)

    2014-06-30

    Jun 30, 2014 ... metallic copper enriched on the surface film of austenitic stainless ... Dispersed inclusions of this phase can influence the stability of .... two microstructures showed that copper concentration possessed a non-uniform chemical.

  15. Copper tolerance and virulence in bacteria

    Science.gov (United States)

    Ladomersky, Erik; Petris, Michael J.

    2015-01-01

    Copper (Cu) is an essential trace element for all aerobic organisms. It functions as a cofactor in enzymes that catalyze a wide variety of redox reactions due to its ability to cycle between two oxidation states, Cu(I) and Cu(II). This same redox property of copper has the potential to cause toxicity if copper homeostasis is not maintained. Studies suggest that the toxic properties of copper are harnessed by the innate immune system of the host to kill bacteria. To counter such defenses, bacteria rely on copper tolerance genes for virulence within the host. These discoveries suggest bacterial copper intoxication is a component of host nutritional immunity, thus expanding our knowledge of the roles of copper in biology. This review summarizes our current understanding of copper tolerance in bacteria, and the extent to which these pathways contribute to bacterial virulence within the host. PMID:25652326

  16. Preparation of Pure Copper Powder from Acidic Copper Chloride Waste Etchant

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The method for the recycling of copper from copper chloride solution was developed. This process consists of extraction of copper, purification and particle size reduction. In the first step, reductive metal scraps were added to acidic copper chloride waste enchants produced in the PCB industry to obtain copper powder.Composition analysis showed that this powder contained impurities such as Fe, Ni, and water. So, drying and purification were carried out by using microwave and a centrifugal separator. Thereby the copper powder had a purity of higher than 99% and spherical form in morphology. The copper powder size was decreased by ball milling.

  17. Coating of a steel wire with copper

    Science.gov (United States)

    Vdovin, K. N.; Dubskii, G. A.; Nefed'ev, A. A.; Derevyanko, D. V.

    2016-03-01

    The process of coating of a steel wire with liquid copper at a high speed (>1 m/s) is considered. The results of long-term studies of copperizing under laboratory conditions and electron-microscopic investigation of the copper-steel adhesion are used to develop a mathematical model for coating of a steel wire with copper and to create a commercial setup to implement this process.

  18. Canine Models for Copper Homeostasis Disorders

    OpenAIRE

    Xiaoyan Wu; Leegwater, Peter A. J.; Hille Fieten

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper me...

  19. 49 CFR 192.279 - Copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Copper pipe. 192.279 Section 192.279... Copper pipe. Copper pipe may not be threaded except that copper pipe used for joining screw fittings or... heavier wall pipe listed in Table C1 of ASME/ANSI B16.5. [Amdt. 192-62, 54 FR 5628, Feb. 6, 1989, as...

  20. Modulation of tau phosphorylation by environmental copper

    OpenAIRE

    Voss, Kellen; Harris, Christopher; Ralle, Martina; Duffy, Megan; Murchison, Charles; Joseph F. Quinn

    2014-01-01

    Background The transition metal copper enhances amyloid β aggregation and neurotoxicity, and in models of concomitant amyloid and tau pathology, copper also promotes tau aggregation. Since it is not clear if the effects of environmental copper upon tau pathology are dependent on the presence of pathological amyloid β, we tested the effects of copper overload and complexing in disease models which lack pathological amyloid β. Methods We used cell culture and transgenic murine models to test th...

  1. Canine Models for Copper Homeostasis Disorders

    OpenAIRE

    Xiaoyan Wu; Leegwater, Peter A.J.; Hille Fieten

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper me...

  2. Tensile behavior of nanocrystalline copper

    Energy Technology Data Exchange (ETDEWEB)

    Sanders, P.G.; Weertman, J.R. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering; Eastman, J.A. [Northwestern Univ., Evanston, IL (United States). Dept. of Materials Science and Engineering]|[Argonne National Lab., IL (United States). Materials Science Div.

    1995-11-01

    High density nanocrystalline copper produced by inert gas condensation was tested in tension. Displacements were measured using foil strain gauges, which greatly improved the accuracy of the strain data. The Young`s modulus of nanocrystalline copper was found to be consistent with that of coarse-grained copper. Total elongations of {approx} 1% were observed in samples with grain sizes less than 50 nm, while a sample with a grain size of 110 nm exhibited more than 10% elongation, perhaps signifying a change to a dislocation-based deformation mechanism in the larger-grained material. In addition, tensile tests were performed as a function of strain rate, with a possible trend of decreased strength and increased elongation as the strain rate was decreased.

  3. Monitoring copper in Wilson's disease.

    Science.gov (United States)

    Walshe, J M

    2010-01-01

    Monitoring copper metabolism in patients with Wilson's disease is not an exact science. At present, there are no simple methods of estimating the total body load of this metal. Indirect methods must therefore be used. A survey of the current literature shows that most approaches rely on the determination of blood and urine copper concentration. Both these should decrease with treatment. In parallel with decreased copper concentration, there should be subsequent improvement in more routine laboratory tests including liver and renal function, blood count parameters, and clotting factors. Lack of compliance is revealed by a reversal of this trend. This chapter critically reviews current testing methods and describes other approaches that may be helpful.

  4. Mechanochemical reduction of copper sulfide

    DEFF Research Database (Denmark)

    Balaz, P.; Takacs, L.; Jiang, Jianzhong

    2002-01-01

    The mechanochemical reduction of copper sulfide with iron was induced in a Fritsch P-6 planetary mill, using WC vial filled with argon and WC balls. Samples milled for specific intervals were analyzed by XRD and Mossbauer spectroscopy. Most of the reaction takes place during the first 10 min...... of milling and only FeS and Cu are found after 60 min. The main chemical process is accompanied by phase transformations of the sulfide phases as a result of milling. Djurleite partially transformed to chalcocite and a tetragonal copper sulfide phase before reduction. The cubic modification of FeS was formed...... first, transforming to hexagonal during the later stages of the process. The formation of off-stoichiometric phases and the release of some elemental sulfur by copper sulfide are also probable....

  5. Copper tolerance of Trichoderma species

    Directory of Open Access Journals (Sweden)

    Jovičić-Petrović Jelena

    2014-01-01

    Full Text Available Some Trichoderma strains can persist in ecosystems with high concentrations of heavy metals. The aim of this research was to examine the variability of Trichoderma strains isolated from different ecosystems, based on their morphological properties and restriction analysis of ITS fragments. The fungal growth was tested on potato dextrose agar, amended with Cu(II concentrations ranging from 0.25 to 10 mmol/l, in order to identify copper-resistant strains. The results indicate that some isolated strains of Trichoderma sp. show tolerance to higher copper concentrations. Further research to examine the ability of copper bioaccumulation by tolerant Trichoderma strains is needed. [Projekat Ministarstva nauke Republike Srbije, br. TR 31080 i br. III 43010

  6. LIWU Copper Plans to Get Listed

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>According to recently-released "Notice con-cerning Environmental Protection Checks for IPO of Sichuan LIWU Copper Co., Ltd.", Sichuan LIWU Copper Co., Ltd. (hereinafter referred to as LIWU Copper) plans to issue 68 million shares, and all the funds raised will be

  7. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J|info:eu-repo/dai/nl/074236539; Fieten, Hille|info:eu-repo/dai/nl/314112596

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurolog

  8. Extra-Hepatic Storage of Copper

    DEFF Research Database (Denmark)

    Heydorn, Kaj; Damsgaard, Else; Horn, N.

    1975-01-01

    The distribution of copper among the organs of an aborted, male foetus, expected to develop Menkes' syndrome, was entirely different from the distribution in 4 normal foetuses. Copper concentrations determined by neutron activation analysis showed a considerably reduced content in the liver......, but increased concentrations in the other organs analysed; total foetal copper was normal....

  9. Quanwei Copper Processing Base Put Into Operation

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>Quanwei (Tongling) Copper Co.,Ltd’s copper processing base in Tongling of Anhui Province has been put into operation at the end of De- cember last year. It is reported that the copper processing project, invested by Zhengwei (Shenzhen) Technology

  10. Study on copper adsorption on olivine

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The copper adsorption on olivine supplied by A/S Olivine production plant at Aheim in western Norway has been studied. The factors which affect the uptake of copper have been evaluated. The results reveal that the equilibrium pH in aqueous solution has the greatest influence on the copper adsorption thanks to the competitive adsorption between proton and copper ions, and the adsorption of copper to olivine increases rapidly with the pH increasing from 4 to 6. The initial copper concentration and olivine dose also possess significant effect on copper adsorption. The adsorption efficieny of copper increases with the increase of olivine dose or the decrease of initial copper concentration at the same pH. The ionic strength effect on the adsorption has also been investigated, but it owns little effect on the adsorption process of copper due to the formation of inner sphere surface complexation of copper on olivine. The experimental data show that olivine has a high acid buffer capacity and is an effective adsorbent for copper.

  11. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurolog

  12. Preparation of Copper-loaded Microcapsule Formulations

    Directory of Open Access Journals (Sweden)

    Nenad Jalšenjak

    2011-06-01

    Full Text Available Novel copper-loaded chitosan or chitosan/alginate based microcapsules formulations have been presented. It was shown that prolonged release of copper from microcapsules accompanied with possible prolonged presence of copper on leaves is useful in crop protection.

  13. Preparation of Copper-loaded Microcapsule Formulations

    Directory of Open Access Journals (Sweden)

    Nenad Jalšenjak

    2014-02-01

    Full Text Available Novel copper-loaded chitosan or chitosan/alginate based microcapsules formulations have been presented. It was shown that prolonged release of copper from microcapsules accompanied with possible prolonged presence of copper on leaves is useful in crop protection.

  14. Canine Models for Copper Homeostasis Disorders

    NARCIS (Netherlands)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-01-01

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and

  15. Copper coating specification for the RHIC arcs

    Energy Technology Data Exchange (ETDEWEB)

    Blaskiewicz, M.

    2010-12-01

    Copper coating specifications for the RHIC arcs are given. Various upgrade scenarios are considered and calculations of resistive wall losses in the arcs are used to constrain the necessary quality and surface thickness of a copper coating. We find that 10 {mu}m of high purity copper will suffice.

  16. Distribution of Copper in Rats Submitted to Treatment With Copper Aspirinate

    OpenAIRE

    LIU, Weiping; Yang, Yikun; Xiong, Huizhou; Lu, Ying; Yang, Rong

    1998-01-01

    The distribution of copper in Sprague – Dawley rats following a three month oral administration of 0,10 or 50mg/kg copper aspirinate has been investigated. Metal content was determined by ICP – AES in blood, brain, kidney, liver, lung, spleen, and dejection. The results show that treatment with copper aspirinate did not cause accumulation of copper in rats and excess ingested copper was excreted through feces.

  17. Chinalco Straightened Out Copper Assets, and Delegated Stock Equity of Yunnan Copper

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>Immediately after the news that Chinalco transferred 58%stock equity of Yunnan Copper Group to its wholly-owned subsidiary China Copper Corporation Limited free of charge was disclosed on July 9,many individual investors couldn’t help but to think:Does it mean China Copper Corporation Limited will assemble assets for overall listing?At present,among main copper business companies under China Copper Corporation

  18. A copper vapor laser by using a copper-vapor-complex reaction at a low temperature

    OpenAIRE

    Kano, Toshiyuki; Taniguchi, Hiroshi; Saito, Hiroshi

    1987-01-01

    A copper vapor laser performance by using ametal-vapor-complex reaction (Cu+AlBr3) is reported. The laser operation is obtained at a low temperature without externalheating because of the AlBr3 vapors evaporating at a room temperature. The copper vapor laser using this metal-vapor-complex reaction has an advantage of deposition-free of a metallic copper to the laser tube wall, which is different from the copper halide and the organometallic copper lasers.

  19. Copper metabolism and copper-mediated alterations in the metabolism of cultured astrocytes

    OpenAIRE

    Scheiber, Ivo Florin

    2012-01-01

    Copper is an essential element that is required for a variety of important cellular functions. Since not only copper deficiency, but also excess of copper can seriously affect cellular functions, cellular copper metabolism is tightly regulated. Disturbances of copper homeostasis are the underlying defect of the inherited diseases Menkes and Wilson s disease and have also been linked to several neurodegenerative diseases including Alzheimer s disease and Parkinson s disease. Known astrocytes f...

  20. Electrochemical nucleation and growth of copper and copper alloys

    Science.gov (United States)

    Shao, Wenbo

    This dissertation aims to contribute to a fundamental understanding of the physicochemical processes occurring in electrochemical nucleation and growth. To this end, the effects of various anions (chloride (Cl-), sulfate (SO42-) and sulfamate (NH2SO 3-)) on the electrochemical kinetics and the mechanism of copper reduction, as well as on the microstructure of the resulting films, were studied. On the basis of this work, the deposition of copper alloys (Cu-Ag with positive heat of mixing, Cu-Au with negative heat of mixing) was investigated with the main objective to achieve an insight on the role of solid state thermodynamics on the electrocrystallization process. Chloride ions cause two competing effects: at low chloride concentration the formation of an adsorbed chloride layer introduces an additional reaction pathway, resulting in an overall depolarization of the reduction process with no significant change of the Tafel slope. At high chloride concentration, complexation phenomena induce a cathodic polarization of the deposition process and a decrease in the Tafel slope. Chlorides cause a decrease in the density and an increased size of copper nuclei. Sulfamate depolarizes copper reduction the most and results in the largest nucleus density. Chloride promotes the faceting, and dendritic growth of copper deposits along direction by introducing interfacial anisotropy. Addition of Ag in the solution or in the electrode substrate enhances copper deposition and results in an additional reduction peak. Codeposition of Cu-Ag increases nucleus density and decreases nucleus size. Such enhancement of copper deposition, the increase in nucleus density and the decrease in nucleus size by Ag could be due to the continued formation of a surface alloy of Cu-Ag and the fast interface dynamics of Ag deposition. Cu can be underpotentially codeposited in the Cu-Au alloy. Homogeneous solid solutions are grown under conditions of underpotential deposition of Cu, while precipitation

  1. Electrochemical behaviour of alkaline copper complexes

    Indian Academy of Sciences (India)

    C L Aravinda; S M Mayanna; V R Muralidharan

    2000-10-01

    A search for non-cyanide plating baths for copper resulted in the development of alkaline copper complex baths containing trisodium citrate [TSC] and triethanolamine [TEA]. Voltammetric studies were carried out on platinum to understand the electrochemical behaviour of these complexes. In TSC solutions, the deposition of copper involves the slow formation of a monovalent species. Adsorption of this species obeys Langmuir isotherm. In TEA solutions the deposition involves the formation of monovalent ions obeying the non-activated Temkin isotherm. Conversion of divalent to monovalent copper is also slow. In TEA and TSC alkaline copper solutions, the predominant species that undergo stepwise reduction contain only TEA ligands

  2. Crystallization of copper metaphosphate glass

    Science.gov (United States)

    Bae, Byeong-Soo; Weinberg, Michael C.

    1993-01-01

    The effect of the valence state of copper in copper metaphosphate glass on the crystallization behavior and glass transition temperature has been investigated. The crystallization of copper metaphosphate is initiated from the surface and its main crystalline phase is copper metaphosphate (Cu(PO)3),independent of the (Cu sup 2+)/(Cu(total)). However, the crystal morphology, the relative crystallization rates, and their temperature dependences are affected by the (Cu sup 2+)/(Cu (total)) ratio in the glass. On the other hand, the totally oxidized glass crystallizes from all over the surface. The relative crystallization rate of the reduced glass to the totally oxidized glass is large at low temperature, but small at high temperature. The glass transition temperature of the glass increases as the (Cu sup 2+)/(Cu(total)) ratio is raised. It is also found that the atmosphere used during heat treatment does not influence the crystallization of the reduced glass, except for the formation of a very thin CuO surface layer when heated in air.

  3. Spectroscopic studies of copper enzymes

    Energy Technology Data Exchange (ETDEWEB)

    Dooley, D.M.; Moog, R.; Zumft, W.; Koenig, S.H.; Scott, R.A.; Cote, C.E.; McGuirl, M.

    1986-05-01

    Several spectroscopic methods, including absorption, circular dichroism (CD), magnetic CD (MCD), X-ray absorption, resonance Raman, EPR, NMR, and quasi-elastic light-scattering spectroscopy, have been used to probe the structures of copper-containing amine oxidases, nitrite reductase, and nitrous oxide reductase. The basic goals are to determine the copper site structure, electronic properties, and to generate structure-reactivity correlations. Collectively, the results on the amine oxidases permit a detailed model for the Cu(II) sites in these enzymes to be constructed that, in turn, rationalizes the ligand-binding chemistry. Resonance Raman spectra of the phenylhydrazine and 2,4-dinitrophenyl-hydrazine derivatives of bovine plasma amine oxidase and models for its organic cofactor, e.g. pyridoxal, methoxatin, are most consistent with methoxatin being the intrinsic cofactor. The structure of the Cu(I) forms of the amine oxidases have been investigated by X-ray absorption spectroscopy (XAS); the copper coordination geometry is significantly different in the oxidized and reduced forms. Some anomalous properties of the amine oxidases in solution are explicable in terms of their reversible aggregation, which the authors have characterized via light scattering. Nitrite and nitrous oxide reductases display several novel spectral properties. The data suggest that new types of copper sites are present.

  4. Copper complexes as chemical nucleases

    Indian Academy of Sciences (India)

    Akhil R Chakravarty; Pattubala A N Reddy; Bidyut K Santra; Anitha M Thomas

    2002-08-01

    Redox active mononuclear and binuclear copper(II) complexes have been prepared and structurally characterized. The complexes have planar N-donor heterocyclic bases like 1,10-phenanthroline (phen), dipyridoquinoxaline (dpq) and dipyridophenazine (dppz) ligands that are suitable for intercalation to B-DNA. Complexes studied for nuclease activity have the formulations [Cu(dpq)2(H2O)] (ClO4)2.H2O (1), [{CuL(H2O)}2(-ox)](ClO4)2 (L = bpy, 2; phen, 3; dpq, 4; and dppz, 5) and [Cu(L)(salgly)] (L = bpy, 6; phen, 7; dpq, 8; and dppz, 9), where salgly is a tridentate Schiff base obtained from the condensation of glycine and salicylaldehyde. The dpq complexes are efficient DNA binding and cleavage active species. The dppz complexes show good binding ability but poor nuclease activity. The cleavage activity of the bis-dpq complex is significantly higher than the bis-phen complex of copper(II). The nuclease activity is found to be dependent on the intercalating nature of the complex and on the redox potential of the copper(II)/copper(I) couple. The ancillary ligand plays a significant role in binding and cleavage activity.

  5. Copper proteomes, phylogenetics and evolution.

    Science.gov (United States)

    Decaria, Leonardo; Bertini, Ivano; Williams, Robert J P

    2011-01-01

    This paper is a continuation of our study of the connection between the changing environment and the changing use of particular elements in organisms in the course of their combined evolution (Decaria, Bertini and Williams, Metallomics, 2010, 2, 706). Here we treat the changes in copper proteins in historically the same increasingly oxidising environmental conditions. The study is a bioinformatic analysis of the types and the numbers of copper domains of proteins from 435 DNA sequences of a wide range of organisms available in NCBI, using the method developed by Andreini, Bertini and Rosato in Accounts of Chemical Research 2009, 42, 1471. The copper domains of greatest interest are found predominantly in copper chaperones, homeostatic proteins and redox enzymes mainly used outside the cytoplasm which are in themselves somewhat diverse. The multiplicity of these proteins is strongly marked. The contrasting use of the iron and heme iron proteins in oxidations, mostly in the cytoplasm, is compared with them and with activity of zinc fingers during evolution. It is shown that evolution is a coordinated development of the chemistry of elements with use of novel and multiple copies of their proteins as their availability rises in the environment.

  6. CopperCore Service Integration

    Science.gov (United States)

    Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; van Rosmalen, Peter; Koper, Rob

    2007-01-01

    In an e-learning environment there is a need to integrate various e-learning services like assessment services, collaboration services, learning design services and communication services. In this article we present the design and implementation of a generic integrative service framework, called CopperCore Service Integration (CCSI). We will…

  7. Reactivity test between beryllium and copper

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, H. [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan); Kato, M. [NGK Insulators, Ltd., Aichi-ken (Japan)

    1995-09-01

    Beryllium has been expected for using as plasma facing material on ITER. And, copper alloy has been proposed as heat sink material behind plasma facing components. Therefore, both materials must be joined. However, the elementary process of reaction between beryllium and copper alloy does not clear in detail. For example, other authors reported that beryllium reacted with copper at high temperature, but it was not obvious about the generation of reaction products and increasing of the reaction layer. In the present work, from this point, for clarifying the elementary process of reaction between beryllium and copper, the out-of-pile compatibility tests were conducted with diffusion couples of beryllium and copper which were inserted in the capsule filled with high purity helium gas (6N). Annealing temperatures were 300, 400, 500, 600 and 700{degrees}C, and annealing periods were 100, 300 and 1000h. Beryllium specimens were hot pressed beryllium, and copper specimens were OFC (Oxygen Free Copper).

  8. Friction stir welding of copper alloys

    Institute of Scientific and Technical Information of China (English)

    Liu Shuhua; Liu Meng; Wang Deqing; Xu Zhenyue

    2007-01-01

    Copper plates,brass plates and copper/brass plates were friction stir welded with various parameters. Experimental results show that the microstructure of the weld is characterized by its much finer grains as contrasted with the coarse grains of parent materials and the heat-affected zones are very narrow. The microhardness of the copper weld is a little higher than that of parent plate. The microhardness of brass weld is about 25% higher than that of parent material. The tensile strength of copper joints increases with increasing welding speed in the test range. The range of parameters to obtain good welds for copper is much wider than that for brass. When different materials were welded, the position of copper plate before welding affected the quality of FSW joints. If the copper plate was put on the advancing side of weld, the good quality of weld could be got under proper parameters.

  9. Catastrophic Oxidation of Copper: A Brief Review

    Science.gov (United States)

    Belousov, V. V.; Klimashin, A. A.

    2012-10-01

    A brief review of the current understanding of copper accelerated oxidation in the presence of low-melting oxides (Bi2O3, MoO3, and V2O5) is given. Special attention is paid to the kinetics, thermodynamics, and mechanisms of accelerated oxidation of copper. The mechanisms of two stages (fast and superfast) of the copper accelerated oxidation are considered. It is shown that the fast oxidation of copper occurs by a diffusion mechanism. Oxygen diffusion along the liquid channels in the oxide scale is the rate-limiting step in the overall mechanism. The superfast oxidation of copper occurs by a fluxing mechanism. Realization of the particular mechanism depends on the mass ratio of low-melting oxide to the metal. The mass ratios of low-melting oxide to the metal and the oxygen partial pressures for superfast oxidation of copper are established. A model of the fast oxidation of copper is discussed.

  10. Process Of Bonding Copper And Tungsten

    Science.gov (United States)

    Slattery, Kevin T.; Driemeyer, Daniel E.

    1999-11-23

    Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by thermal plasma spraying mixtures of copper powder and tungsten powder in a varied blending ratio such that the blending ratio of the copper powder and the tungsten powder that is fed to a plasma torch is intermittently adjusted to provide progressively higher copper content/tungsten content, by volume, ratio values in the interlayer in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

  11. Radiation resistance of copper alloys at high exposure levels

    Energy Technology Data Exchange (ETDEWEB)

    Garner, F.A. (Pacific Northwest Lab., Richland, WA (USA)); Zinkle, S.J. (Oak Ridge National Lab., TN (USA))

    1990-08-01

    Copper alloys are currently being considered for high heat flux applications in fusion power devices. A review is presented of the results of two separate series of experiments on the radiation response of copper and copper alloys. One of these involved pure copper and boron-doped copper in the ORR mixed spectrum reactor. The other series included pure copper and a wide array of copper alloys irradiated in the FFTF fast reactor 16 refs., 13 figs.

  12. Abnormal Copper Homeostasis: Mechanisms and Roles in Neurodegeneration

    OpenAIRE

    Mario Manto

    2014-01-01

    As a cofactor of proteins and enzymes involved in critical molecular pathways in mammals and low eukaryotes, copper is a transition metal essential for life. The intra-cellular and extra-cellular metabolism of copper is under tight control, in order to maintain free copper concentrations at very low levels. Copper is a critical element for major neuronal functions, and the central nervous system is a major target of disorders of copper metabolism. Both the accumulation of copper and copper d...

  13. Smelting chlorination method applied to removal of copper from copper slags

    Institute of Scientific and Technical Information of China (English)

    李磊; 王华; 胡建杭

    2015-01-01

    In order to reasonably utilize the iron resources of copper slags, the smelting chlorination process was used to remove copper from copper slags. Higher holding temperature and O2 flow rate are beneficial to increasing copper removal rate. However, the Cu2O mode is formed by the reaction of surplus O2 and CuCl with O2 flow rate increasing over 0.4 L/min, causing CuCl volatilization rate and copper removal rate to decrease. The resulting copper removal rate of 84.34%is obtained under the optimum conditions of holding temperature of 1573 K, residence time of 10 min, CaCl2 addition amount of 0.1 (mass ratio of CaCl2 and the copper slag) and oxygen flow rate of 0.4 L/min. The efficient removal of copper from copper slags through chlorination is feasible.

  14. Grain Refinement of Deoxidized Copper

    Science.gov (United States)

    Balart, María José; Patel, Jayesh B.; Gao, Feng; Fan, Zhongyun

    2016-10-01

    This study reports the current status of grain refinement of copper accompanied in particular by a critical appraisal of grain refinement of phosphorus-deoxidized, high residual P (DHP) copper microalloyed with 150 ppm Ag. Some deviations exist in terms of the growth restriction factor ( Q) framework, on the basis of empirical evidence reported in the literature for grain size measurements of copper with individual additions of 0.05, 0.1, and 0.5 wt pct of Mo, In, Sn, Bi, Sb, Pb, and Se, cast under a protective atmosphere of pure Ar and water quenching. The columnar-to-equiaxed transition (CET) has been observed in copper, with an individual addition of 0.4B and with combined additions of 0.4Zr-0.04P and 0.4Zr-0.04P-0.015Ag and, in a previous study, with combined additions of 0.1Ag-0.069P (in wt pct). CETs in these B- and Zr-treated casts have been ascribed to changes in the morphology and chemistry of particles, concurrently in association with free solute type and availability. No further grain-refining action was observed due to microalloying additions of B, Mg, Ca, Zr, Ti, Mn, In, Fe, and Zn (~0.1 wt pct) with respect to DHP-Cu microalloyed with Ag, and therefore are no longer relevant for the casting conditions studied. The critical microalloying element for grain size control in deoxidized copper and in particular DHP-Cu is Ag.

  15. The copper metallome in prokaryotic cells.

    Science.gov (United States)

    Rensing, Christopher; McDevitt, Sylvia Franke

    2013-01-01

    As a trace element copper has an important role in cellular function like many other transition metals. Its ability to undergo redox changes [Cu(I) ↔ Cu(II)] makes copper an ideal cofactor in enzymes catalyzing electron transfers. However, this redox change makes copper dangerous for a cell since it is able to be involved in Fenton-like reactions creating reactive oxygen species (ROS). Cu(I) also is a strong soft metal and can attack and destroy iron-sulfur clusters thereby releasing iron which can in turn cause oxidative stress. Therefore, copper homeostasis has to be highly balanced to ensure proper cellular function while avoiding cell damage.Throughout evolution bacteria and archaea have developed a highly regulated balance in copper metabolism. While for many prokaryotes copper uptake seems to be unspecific, others have developed highly sophisticated uptake mechanisms to ensure the availability of sufficient amounts of copper. Within the cytoplasm copper is sequestered by various proteins and molecules, including specific copper chaperones, to prevent cellular damage. Copper-containing proteins are usually located in the cytoplasmic membrane with the catalytic domain facing the periplasm, in the periplasm of Gram-negative bacteria, or they are secreted, limiting the necessity of copper to accumulate in the cytoplasm. To prevent cellular damage due to excess copper, bacteria and archaea have developed various copper detoxification strategies. In this chapter we attempt to give an overview of the mechanisms employed by bacteria and archaea to handle copper and the importance of the metal for cellular function as well as in the global nutrient cycle.

  16. Variations of serum copper values in pregnancy

    Directory of Open Access Journals (Sweden)

    Vukelić Jelka

    2012-01-01

    Full Text Available Introduction. Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. Objective. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathological pregnancies and if this is of some importance. Methods. A total of 2170 plasma samples for copper analyses were made in the following groups: healthy non-pregnant women; healthy pregnant women from the 5th-40th gestational week, during the first delivery stage and during the first three postpartum weeks, in pregnant women with habitual abortion, imminent abortion, abortion in progress, missed abortion (9th-24th weeks, missed labour and premature rupture of membranes (29th-40th weeks. Levels of serum copper were determined by colorimetric technique of bathocuproin with disulphate as a chromogen. Results. Serum copper values in non-pregnant women range from 11.6-25.8 μmol/L. In healthy pregnant women, there is a constant trend of the increase of serum copper. The mean serum copper values revealed three significant peaks at the 22nd, 27th and 35th gestational week. Serum copper values in the patients with some pathological pregnancies in relation to the serum copper values of the healthy pregnant women were significantly lower. Conclusion. Serum copper values can be used as an indicator of some pathological pregnancies.

  17. Variations of serum copper values in pregnancy.

    Science.gov (United States)

    Vukelić, Jelka; Kapamadzija, Aleksandra; Petrović, Djordje; Grujić, Zorica; Novakov-Mikić, Aleksandra; Kopitović, Vesna; Bjelica, Artur

    2012-01-01

    Copper is essential micronutrient and has an important role in the human body. The serum copper increases during pregnancy and is doubled at full term. Lower levels of serum copper in pregnancy are connected with some pathological conditions. The aim of this study was to estimate the levels of serum copper in normal and pathological pregnancies, comparing them with values of serum copper in non-pregnant women, to determine if serum copper is lower in some pathological pregnancies and if this is of some importance. A total of 2170 plasma samples for copper analyses were made in the following groups: healthy non-pregnant women; healthy pregnant women from the 5th-40th gestational week, during the first delivery stage and during the first three postpartum weeks, in pregnant women with habitual abortion, imminent abortion, abortion in progress, missed abortion (9th-24th weeks), missed labour and premature rupture of membranes (29th-40th weeks). Levels of serum copper were determined by colorimetric technique of bathocuproin with disulphate as a chromogen. Serum copper values in non-pregnant women range from 11.6-25.8 micromol/L. In healthy pregnant women, there is a constant trend of the increase of serum copper. The mean serum copper values revealed three significant peaks at the 22nd, 27th and 35th gestational week. Serum copper values in the patients with some pathological pregnancies in relation to the serum copper values of the healthy pregnant women were significantly lower. Serum copper values can be used as an indicator of some pathological pregnancies.

  18. A Plasmodium falciparum copper-binding membrane protein with copper transport motifs

    Directory of Open Access Journals (Sweden)

    Choveaux David L

    2012-11-01

    Full Text Available Abstract Background Copper is an essential catalytic co-factor for metabolically important cellular enzymes, such as cytochrome-c oxidase. Eukaryotic cells acquire copper through a copper transport protein and distribute intracellular copper using molecular chaperones. The copper chelator, neocuproine, inhibits Plasmodium falciparum ring-to-trophozoite transition in vitro, indicating a copper requirement for malaria parasite development. How the malaria parasite acquires or secretes copper still remains to be fully elucidated. Methods PlasmoDB was searched for sequences corresponding to candidate P. falciparum copper-requiring proteins. The amino terminal domain of a putative P. falciparum copper transport protein was cloned and expressed as a maltose binding fusion protein. The copper binding ability of this protein was examined. Copper transport protein-specific anti-peptide antibodies were generated in chickens and used to establish native protein localization in P. falciparum parasites by immunofluorescence microscopy. Results Six P. falciparum copper-requiring protein orthologs and a candidate P. falciparum copper transport protein (PF14_0369, containing characteristic copper transport protein features, were identified in PlasmoDB. The recombinant amino terminal domain of the transport protein bound reduced copper in vitro and within Escherichia coli cells during recombinant expression. Immunolocalization studies tracked the copper binding protein translocating from the erythrocyte plasma membrane in early ring stage to a parasite membrane as the parasites developed to schizonts. The protein appears to be a PEXEL-negative membrane protein. Conclusion Plasmodium falciparum parasites express a native protein with copper transporter characteristics that binds copper in vitro. Localization of the protein to the erythrocyte and parasite plasma membranes could provide a mechanism for the delivery of novel anti-malarial compounds.

  19. Accumulation and hyperaccumulation of copper in plants

    Science.gov (United States)

    Adam, V.; Trnkova, L.; Huska, D.; Babula, P.; Kizek, R.

    2009-04-01

    Copper is natural component of our environment. Flow of copper(II) ions in the environment depends on solubility of compounds containing this metal. Mobile ion coming from soil and rocks due to volcanic activity, rains and others are then distributed to water. Bio-availability of copper is substantially lower than its concentration in the aquatic environment. Copper present in the water reacts with other compounds and creates a complex, not available for organisms. The availability of copper varies depending on the environment, but moving around within the range from 5 to 25 % of total copper. Thus copper is stored in the sediments and the rest is transported to the seas and oceans. It is common knowledge that copper is essential element for most living organisms. For this reason this element is actively accumulated in the tissues. The total quantity of copper in soil ranges from 2 to 250 mg / kg, the average concentration is 30 mg / kg. Certain activities related to agriculture (the use of fungicides), possibly with the metallurgical industry and mining, tend to increase the total quantity of copper in the soil. This amount of copper in the soil is a problem particularly for agricultural production of food. The lack of copper causes a decrease in revenue and reduction in quality of production. In Europe, shows the low level of copper in total 18 million hectares of farmland. To remedy this adverse situation is the increasing use of copper fertilizers in agricultural soils. It is known that copper compounds are used in plant protection against various illnesses and pests. Mining of minerals is for the development of human society a key economic activity. An important site where the copper is mined in the Slovakia is nearby Smolníka. Due to long time mining in his area (more than 700 years) there are places with extremely high concentrations of various metals including copper. Besides copper, there are also detected iron, zinc and arsenic. Various plant species

  20. Jiangxi Copper and Yates Joined Hands in High-Grade Copper Foil Project Construction

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> The construction of a large-scale copper foilproject recently started in the High-Tech De-velopment Zone of Nanchang,the capital ofJiangxi Province.This new copper foil factory,with a designed annual production capacity of6,000 tons of high-grade copper foil,is a jointventure project between Jiangxi Copper Group,the No.1 copper producer in China,and YatesInc.,a leading US copper product company andthe world’s first electrical circuit board maker.

  1. Electrochemical in-situ impregnation of wood using a copper nail as source for copper

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Block, Thomas; Nymark, Morten

    2011-01-01

    A new method for copper impregnation of wood in structures was suggested and tested in laboratory scale with specimen of new pine sapwood. A copper nail and a steel screw were placed in the wood, and an electric direct current field was applied, so the copper nail was anode and the screw...... was cathode. At the anode, copper ions were generated. The copper ions were transported into the wood by electromigration (movement of ions in an applied electric field) towards the cathode, and a volume between the two electrodes was thereby impregnated. Copper also moved to a lesser degree in the opposite...

  2. Radiocopper for the imaging of copper metabolism.

    Science.gov (United States)

    Hueting, Rebekka

    2014-04-01

    The redox-active transition metal copper is an essential trace element for growth and development and serves as a structural or catalytic cofactor for many enzymes in a range of physiological processes. Mammalian copper homeostasis is tightly regulated, and an imbalance in copper metabolism is implicated in various pathological disorders. Radioactive copper isotopes, in particular (64) Cu (t1/2  = 12.7 h) and (67) Cu (t1/2  = 62.01 h), have made important contributions to the understanding of copper metabolism in health and disease. This review gives a brief account of how radiolabelled copper(II) salts and bioreductive copper complexes have been used to trace copper uptake, transport and efflux in vitro and in vivo. Recently, positron emission tomography (PET) has emerged as a noninvasive tool to image copper metabolism in living subjects and (64) Cu-PET is investigated for the study of copper-related neurological disorders, genetic diseases and cancer.

  3. Canine Models for Copper Homeostasis Disorders

    Directory of Open Access Journals (Sweden)

    Xiaoyan Wu

    2016-02-01

    Full Text Available Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper metabolism, the underlying genetic defects remain elusive. Several pure bred dog populations are affected with copper-associated hepatitis showing similarities to human copper metabolism disorders. Gene-mapping studies in these populations offer the opportunity to discover new genes involved in copper metabolism. Furthermore, due to the relatively large body size and long life-span of dogs they are excellent models for development of new treatment strategies. One example is the recent use of canine organoids for disease modeling and gene therapy of copper storage disease. This review addresses the opportunities offered by canine genetics for discovery of genes involved in copper metabolism disorders. Further, possibilities for the use of dogs in development of new treatment modalities for copper storage disorders, including gene repair in patient-derived hepatic organoids, are highlighted.

  4. Canine Models for Copper Homeostasis Disorders.

    Science.gov (United States)

    Wu, Xiaoyan; Leegwater, Peter A J; Fieten, Hille

    2016-02-04

    Copper is an essential trace nutrient metal involved in a multitude of cellular processes. Hereditary defects in copper metabolism result in disorders with a severe clinical course such as Wilson disease and Menkes disease. In Wilson disease, copper accumulation leads to liver cirrhosis and neurological impairments. A lack in genotype-phenotype correlation in Wilson disease points toward the influence of environmental factors or modifying genes. In a number of Non-Wilsonian forms of copper metabolism, the underlying genetic defects remain elusive. Several pure bred dog populations are affected with copper-associated hepatitis showing similarities to human copper metabolism disorders. Gene-mapping studies in these populations offer the opportunity to discover new genes involved in copper metabolism. Furthermore, due to the relatively large body size and long life-span of dogs they are excellent models for development of new treatment strategies. One example is the recent use of canine organoids for disease modeling and gene therapy of copper storage disease. This review addresses the opportunities offered by canine genetics for discovery of genes involved in copper metabolism disorders. Further, possibilities for the use of dogs in development of new treatment modalities for copper storage disorders, including gene repair in patient-derived hepatic organoids, are highlighted.

  5. Nanoscale Copper and Copper Compounds for Advanced Device Applications

    Science.gov (United States)

    Chen, Lih-Juann

    2016-12-01

    Copper has been in use for at least 10,000 years. Copper alloys, such as bronze and brass, have played important roles in advancing civilization in human history. Bronze artifacts date at least 6500 years. On the other hand, discovery of intriguing properties and new applications in contemporary technology for copper and its compounds, particularly on nanoscale, have continued. In this paper, examples for the applications of Cu and Cu alloys for advanced device applications will be given on Cu metallization in microelectronics devices, Cu nanobats as field emitters, Cu2S nanowire array as high-rate capability and high-capacity cathodes for lithium-ion batteries, Cu-Te nanostructures for field-effect transistor, Cu3Si nanowires as high-performance field emitters and efficient anti-reflective layers, single-crystal Cu(In,Ga)Se2 nanotip arrays for high-efficiency solar cell, multilevel Cu2S resistive memory, superlattice Cu2S-Ag2S heterojunction diodes, and facet-dependent Cu2O diode.

  6. Antimicrobial activity of different copper alloy surfaces against copper resistant and sensitive Salmonella enterica.

    Science.gov (United States)

    Zhu, Libin; Elguindi, Jutta; Rensing, Christopher; Ravishankar, Sadhana

    2012-05-01

    Copper has shown antibacterial effects against foodborne pathogens. The objective of this study was to evaluate the antibacterial activity of copper surfaces on copper resistant and sensitive strains of Salmonella enterica. Six different copper alloy coupons (60-99.9% copper) were tested along with stainless steel as the control. The coupons were surface inoculated with either S. Enteritidis or one of the 3 copper resistant strains, S. Typhimurium S9, S19 and S20; stored under various incubation conditions at room temperature; and sampled at various times up to 2 h. The results showed that under dry incubation conditions, Salmonella only survived 10-15 min on high copper content alloys. Salmonella on low copper content alloys showed 3-4 log reductions. Under moist incubation conditions, no survivors were detected after 30 min-2 h on high copper content alloys, while the cell counts decreased 2-4 logs on low copper content coupons. Although the copper resistant strains survived better than S. Enteritidis, they were either completely inactivated or survival was decreased. Copper coupons showed better antimicrobial efficacy in the absence of organic compounds. These results clearly show the antibacterial effects of copper and its potential as an alternative to stainless steel for selected food contact surfaces.

  7. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption

    Directory of Open Access Journals (Sweden)

    R Andreazza

    2011-03-01

    Full Text Available Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária experimental station, Bento Gonçalves, RS, Brazil (29º09'53.92''S and 51º31'39.40''W and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30º29'43.48''S and 53'32'37.87W. Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L-1 in 24 h. Contrarily isolate N11 (Bacillus pumilus displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h. GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration.

  8. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption.

    Science.gov (United States)

    Andreazza, R; Pieniz, S; Okeke, B C; Camargo, F A O

    2011-01-01

    Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol) were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária) experimental station, Bento Gonçalves, RS, Brazil (29°09'53.92″S and 51°31'39.40″W) and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30°29'43.48″S and 53'32'37.87W). Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L(-1) in 24 h. Contrarily isolate N11 (Bacillus pumilus) displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h). GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration.

  9. The Present Conditions of China’s Copper Industry

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>China’s copper industry has formed a complete production system and by the end of 2004, China had 600,000 tons of copper mining capacities, 1.5 million tons of copper smelting capacities, 2.15 million tons of copper refining capacities and 3.8 million tons of copper fabricating capacities.

  10. Thermoelectric Study of Copper Selenide

    Science.gov (United States)

    Yao, Mengliang; Liu, Weishu; Ren, Zhifeng; Opeil, Cyril

    2014-03-01

    Nanostructuring has been shown to be an effective approach in reducing lattice thermal conductivity and improving the figure of merit of thermoelectric materials. Copper selenide is a layered structure material, which has a low thermal conductivity and p-type Seebeck coefficient at low temperatures. We have evaluated several hot-pressed, nanostructured copper selenide samples with different dopants for their thermoelectric properties. The phenomenon of the charge-density wave observed in the nanocomposite, resistivity, Seebeck, thermal conductivity and carrier mobility will be discussed. Funding for this research was provided by the Solid State Solar - Thermal Energy Conversion Center (S3TEC), an Energy Frontier Research Center sponsored by the DOE, Office of Basic Energy Science, Award No. DE-SC0001299/ DE-FG02-09ER46577.

  11. Rapid iodometric determination of copper in some copper-base alloys

    NARCIS (Netherlands)

    Agterdenbos, J.; Eelberse, P.A.

    1966-01-01

    Copper-base alloys, especially those containing tin, are readily dissolved in a mixture of hydrofluoric and nitric acids. In the resulting solution copper can be titrated iodometrically in the conventional manner.

  12. Xinjiang Non-ferrous Metals Wuxin Copper 100,000-ton Cathode Copper Project Commences

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>The construction of Xinjiang Nonferrous Met-als’ Wuxin Copper’s 100,000-ton Cathode Copper Project commenced at the Fukang Xin-jiang Industrial Park of Innovative Non-Ferrous Materials recently. Xinjiang Wuxin Copper

  13. Explosive compact-coating of tungsten–copper alloy to a copper surface

    Science.gov (United States)

    Chen, Xiang; Li, Xiaojie; Yan, Honghao; Wang, Xiaohong; Miao, Yusong

    2017-03-01

    This study proposed a new method for coating tungsten–copper alloy to copper surface. First, the tungsten–copper alloy powder was pre-compacted to the copper surface. Then, the powder in the hydrogen atmosphere was sintered, and the pre-compacted powder was compacted by explosive compact-coating. Finally, diffusion sintering was conducted to improve the density of the coating layer. The theoretical density of the coating reached 99.3%. Microstructure characteristics indicated that tungsten and copper powders were well mixed. Tungsten particles were larger than copper particles. Scanning electron microscope (SEM) fracture surface analysis was different from the traditional fracture of metals. Coating and substrate joint surfaces, which were analyzed by SEM, indicated that the tungsten–copper alloy was sintered on the copper surface. The hardness of the coating layer was 197.6–245.2 HV, and the hardness of the substrate was approximately 55 HV.

  14. Reduction reaction analysis of nanoparticle copper oxide for copper direct bonding using formic acid

    Science.gov (United States)

    Fujino, Masahisa; Akaike, Masatake; Matsuoka, Naoya; Suga, Tadatomo

    2017-04-01

    Copper direct bonding is required for electronics devices, especially power devices, and copper direct bonding using formic acid is expected to lower the bonding temperature. In this research, we analyzed the reduction reaction of copper oxide using formic acid with a Pt catalyst by electron spin resonance analysis and thermal gravimetry analysis. It was found that formic acid was decomposed and radicals were generated under 200 °C. The amount of radicals generated was increased by adding the Pt catalyst. Because of these radicals, both copper(I) oxide and copper(II) oxide start to be decomposed below 200 °C, and the reduction of copper oxide is accelerated by reactants such as H2 and CO from the decomposition of formic acid above 200 °C. The Pt catalyst also accelerates the reaction of copper oxide reduction. Herewith, it is considered that the copper surface can be controlled more precisely by using formic acid to induce direct bonding.

  15. ANALYSIS AND DEVELOPMENT OF COPPER RECYCLING OF DEAD COPPER-CONTAINING CATALYSTS

    OpenAIRE

    O. S. Komarov; I. V. Provorova; V. I. Volosatikov; D. O. Komarov; N. I. Urbanovich

    2009-01-01

    The technology of processing of copper-bearing dead catalysts, which includes leaching and deposition of copper by means of electrolysis and also their application in composition of the mixture for alloy doping is offered.

  16. ANALYSIS AND DEVELOPMENT OF COPPER RECYCLING OF DEAD COPPER-CONTAINING CATALYSTS

    Directory of Open Access Journals (Sweden)

    O. S. Komarov

    2009-01-01

    Full Text Available The technology of processing of copper-bearing dead catalysts, which includes leaching and deposition of copper by means of electrolysis and also their application in composition of the mixture for alloy doping is offered.

  17. LEP Radio Frequency Copper Cavity

    CERN Multimedia

    The pulse of a particle accelerator. 128 of these radio frequency cavities were positioned around CERN's 27-kilometre LEP ring to accelerate electrons and positrons. The acceleration was produced by microwave electric oscillations at 352 MHz. The electrons and positrons were grouped into bunches, like beads on a string, and the copper sphere at the top stored the microwave energy between the passage of individual bunches. This made for valuable energy savings as it reduced the heat generated in the cavity.

  18. Yunnan Copper Co., Ltd. Invested 1.5 Billion Yuan for 200,000-Ton Refined Copper Project in Baoding

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>Yunnan Copper(Group)Co.,Ltd.has signed a strategic agreement with Baoding Municipal Government of Heibei Province in Kunming on the joint development of a copper smelting project.With the joint investment from Baoding Xinxian Government,Yunnan Copper Co.,Ltd.and Baoding Dali Copper Ltd,a copper refinery with an annual capacity of

  19. Functional understanding of the versatile protein copper metabolism MURR1 domain 1 (COMMD1) in copper homeostasis

    NARCIS (Netherlands)

    Fedoseienko, Alina; Bartuzi, Paulina; van de Sluis, Bart

    2014-01-01

    Copper is an important cofactor in numerous biological processes in all living organisms. However, excessive copper can be extremely toxic, so it is vital that the copper level within a cell is tightly regulated. The damaging effect of copper is seen in several hereditary forms of copper toxicity in

  20. In situ Fabrication of Monolithic Copper Azide

    Science.gov (United States)

    Li, Bing; Li, Mingyu; Zeng, Qingxuan; Wu, Xingyu

    2016-04-01

    Fabrication and characterization of monolithic copper azide were performed. The monolithic nanoporous copper (NPC) with interconnected pores and nanoparticles was prepared by decomposition and sintering of the ultrafine copper oxalate. The preferable monolithic NPC can be obtained through decomposition and sintering at 400°C for 30 min. Then, the available monolithic NPC was in situ reacted with the gaseous HN3 for 24 h and the monolithic NPC was transformed into monolithic copper azide. Additionally, the copper particles prepared by electrodeposition were also reacted with the gaseous HN3 under uniform conditions as a comparison. The fabricated monolithic copper azide was characterized by Fourier transform infrared (FTIR), inductively coupled plasma-optical emission spectrometry (ICP-OES), and differential scanning calorimetry (DSC).

  1. SRB Sells Copper for Market Stability

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>In order to ease the tight supply situation for copper on the domestic market and meet the consumption requirement of the industry, the State Goods and Materials Adjustment Center under the State Reserves Bureau (SRB) is ready to sell 20,000 tons of copper by way of open bid. In addition, the SRB also prepares to sell 40,000 tons of copper later in December and

  2. Copper metabolism in analbuminaemic rats fed a high-copper diet.

    NARCIS (Netherlands)

    Yu, S.; Berg, van den G.J.; Beynen, A.C.

    1995-01-01

    Copper metabolism in male Nagase analbuminaemic (NA) rats was compared with that in male Sprague Dawley (SD) rats fed purified diets containing either 5 or 100 mg Cu/kg diet. Dietary copper loading increased hepatic and kidney copper concentrations in both strains to the same extent, but baseline va

  3. Pc Electrolytic System Of Zhangjiagang Copper Industry Company Successfully Produced Copper After Resuming Production

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    On March 17,the PC electrolytic system of Zhangjiagang Copper Industry Co.,Ltd successfully produced the first batch of qualified PC electrolytic copper after resuming production.This company’s 100,000 t/a PC electrolytic copper project was completed and launched into production in April last year.

  4. Nearly 60% Copper Rod & Wire Companies Neutral about Future Copper Price

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>How about the trend of copper price recently? According to the survey result of Shanghai Metals Market, amongst 21 domestic copper rod & wire companies, 57% of the companies are neutral about the future copper price, while 14% and 19% of the companies consider that

  5. Jiangxi Copper Planning to Produce Copper Products of More Than 480,000 Tons This Year

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>It is learned from Jiangxi Copper Group that the company has made the plan to produce copper processing products of more than 480,000 tons, and meanwhile its 100,000-ton copper plate and strip project is planned to be

  6. Tongling’s Ambition for Copper Processing Industrial Leadership

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Known as the "Copper Capital of Ancient China", Tongling’s copper industry posted sub-stantial growth as the domestic copper price rose. According to Wang Yijun, the Director of Tongling DPC, the local government was

  7. TonglingExtended Copper Intensive Processing Industrial Chain

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>Despite the adverse impacts including decline in copper price, in 2012, Tongling’s copper in-dustry development still made steady progress. The number of copper enterprises in Tongling with industrial output value above 100 million

  8. [Copper in methane oxidation: a review].

    Science.gov (United States)

    Su, Yao; Kong, Jiao-Yan; Zhang, Xuan; Xia, Fang-Fang; He, Ruo

    2014-04-01

    Methane bio-oxidation plays an important role in the global methane balance and warming mitigation, while copper has a crucial function in methane bio-oxidation. On one side, copper is known to be a key factor in regulating the expression of the genes encoding the two forms of methane monooxygenases (MMOs) and is the essential metal element of the particulate methane monooxygenase (pMMO). On the other side, the content and fractionation of copper in the environment have great effects on the distribution of methanotrophs and their metabolic capability of methane and non-methane organic compounds, as well as on the copper-specific uptake systems in methanotrophs. Thus, it is meaningful to know the role of copper in methane bio-oxidation for comprehensive understanding of this process and is valuable for guiding the application of methanotrophs in greenhouse gas removal and pollution remediation. In this paper, the roles of copper in methane oxidation were reviewed, including the effect of copper on methanotrophic community structure and activity, the expression and activity of MMOs as well as the copper uptake systems in methanotrophs. The future studies of copper and methane oxidation were also discussed.

  9. Level of copper in human split ejaculate.

    Science.gov (United States)

    Skandhan, Kalanghot; Valsa, James; Sumangala, Balakrishnan; Jaya, Vasudevan

    2017-02-03

    The purpose of this study was to understand the details of splits of an ejaculate and to locate the origin of release of copper into semen. Laboratory methods routinely followed for semen analysis were carried out. Copper was estimated by employing atomic absorption spectrophotometry. First split of ejaculate showed the highest number of motile sperm, the quality of which decreased from first to third. Copper level in splits 1, 2 and 3 was 29, 23 and 22 µg%, respectively. This study concluded that copper was released from throughout the genital tract.

  10. Structure of a copper-isoniazid complex.

    Science.gov (United States)

    Hanson, J C; Camerman, N; Camerman, A

    1981-11-01

    It is well-known that complex formation with copper ions increases the in vitro mycobactericidal action of the antituberculosis agent isoniazid. We report here the preparation and structure of a copper(II)-isoniazid complex. Unit cell parameters are a = 9.575, b = 14.855, and c = 7.056 A and space group P2(1)2(1)2(1). Copper bonding geometry is square planar with the isoniazid carbonyl oxygen and hydrazide amino nitrogen atoms and two chlorines occupying coordination positions. Complexing with copper(II) does not significantly alter the isoniazid molecular conformation.

  11. Copper Nanoparticles in Click Chemistry.

    Science.gov (United States)

    Alonso, Francisco; Moglie, Yanina; Radivoy, Gabriel

    2015-09-15

    The challenges of the 21st century demand scientific and technological achievements that must be developed under sustainable and environmentally benign practices. In this vein, click chemistry and green chemistry walk hand in hand on a pathway of rigorous principles that help to safeguard the health of our planet against negligent and uncontrolled production. Copper-catalyzed azide-alkyne cycloaddition (CuAAC), the paradigm of a click reaction, is one of the most reliable and widespread synthetic transformations in organic chemistry, with multidisciplinary applications. Nanocatalysis is a green chemistry tool that can increase the inherent effectiveness of CuAAC because of the enhanced catalytic activity of nanostructured metals and their plausible reutilization capability as heterogeneous catalysts. This Account describes our contribution to click chemistry using unsupported and supported copper nanoparticles (CuNPs) as catalysts prepared by chemical reduction. Cu(0)NPs (3.0 ± 1.5 nm) in tetrahydrofuran were found to catalyze the reaction of terminal alkynes and organic azides in the presence of triethylamine at rates comparable to those achieved under microwave heating (10-30 min in most cases). Unfortunately, the CuNPs underwent dissolution under the reaction conditions and consequently could not be recovered. Compelling experimental evidence on the in situ generation of highly reactive copper(I) chloride and the participation of copper(I) acetylides was provided. The supported CuNPs were found to be more robust and efficient catalyst than the unsupported counterpart in the following terms: (a) the multicomponent variant of CuAAC could be applied; (b) the metal loading could be substantially decreased; (c) reactions could be conducted in neat water; and (d) the catalyst could be recovered easily and reutilized. In particular, the catalyst composed of oxidized CuNPs (Cu2O/CuO, 6.0 ± 2.0 nm) supported on carbon (CuNPs/C) was shown to be highly versatile and very

  12. Conclusion on the peer review of the pesticide risk assessment of confirmatory data submitted for the active substance Copper (I, copper (II variants namely copper hydroxide, copper oxychloride, tribasic copper sulfate, copper (I oxide, Bordeaux mixture

    Directory of Open Access Journals (Sweden)

    European Food Safety Authority

    2013-06-01

    Full Text Available The conclusions of the European Food Safety Authority (EFSA following the peer review of the initial risk assessment carried out by the competent authority of the rapporteur Member State France, for the pesticide active substance copper (I, copper (II variants (formerly referred to as copper compounds are reported. The context of the peer review was that requested by the European Commission following the submission and evaluation of confirmatory environmental fate and behaviour and ecotoxicology data. The conclusions were reached on the basis of the evaluation of the representative uses of copper (I, copper (II variants as a fungicide/bactericide on grapes and tomatoes. The reliable endpoints concluded as being appropriate for use in regulatory risk assessment, derived from the available studies and literature in the dossier peer reviewed, are presented. Concerns are identified.

  13. Copper and conquer: copper complexes of di-2-pyridylketone thiosemicarbazones as novel anti-cancer therapeutics.

    Science.gov (United States)

    Park, Kyung Chan; Fouani, Leyla; Jansson, Patric J; Wooi, Danson; Sahni, Sumit; Lane, Darius J R; Palanimuthu, Duraippandi; Lok, Hiu Chuen; Kovačević, Zaklina; Huang, Michael L H; Kalinowski, Danuta S; Richardson, Des R

    2016-09-01

    Copper is an essential trace metal required by organisms to perform a number of important biological processes. Copper readily cycles between its reduced Cu(i) and oxidised Cu(ii) states, which makes it redox active in biological systems. This redox-cycling propensity is vital for copper to act as a catalytic co-factor in enzymes. While copper is essential for normal physiology, enhanced copper levels in tumours leads to cancer progression. In particular, the stimulatory effect of copper on angiogenesis has been established in the last several decades. Additionally, it has been demonstrated that copper affects tumour growth and promotes metastasis. Based on the effects of copper on cancer progression, chelators that bind copper have been developed as anti-cancer agents. In fact, a novel class of thiosemicarbazone compounds, namely the di-2-pyridylketone thiosemicarbazones that bind copper, have shown great promise in terms of their anti-cancer activity. These agents have a unique mechanism of action, in which they form redox-active complexes with copper in the lysosomes of cancer cells. Furthermore, these agents are able to overcome P-glycoprotein (P-gp) mediated multi-drug resistance (MDR) and act as potent anti-oncogenic agents through their ability to up-regulate the metastasis suppressor protein, N-myc downstream regulated gene-1 (NDRG1). This review provides an overview of the metabolism and regulation of copper in normal physiology, followed by a discussion of the dysregulation of copper homeostasis in cancer and the effects of copper on cancer progression. Finally, recent advances in our understanding of the mechanisms of action of anti-cancer agents targeting copper are discussed.

  14. Energy and materials flows in the copper industry

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.L.

    1980-12-01

    The copper industry comprises both the primary copper industry, which produces 99.9%-pure copper from copper ore, and the secondary copper industry, which salvages and recycles copper-containing scrap metal to extract pure copper or copper alloys. The United States uses about 2 million tons of copper annually, 60% of it for electrical applications. Demand is expected to increase less than 4% annually for the next 20 years. The primary copper industry is concentrated in the Southwest; Arizona produced 66% of the 1979 total ore output. Primary production uses about 170 x 10/sup 12/ Btu total energy annually (about 100 x 10/sup 6/ Btu/ton pure copper produced from ore). Mining and milling use about 60% of the total consumption, because low-grade ore (0.6% copper) is now being mined. Most copper is extracted by smelting sulfide ores, with concomitant production of sulfur dioxide. Clean air regulations will require smelters to reduce sulfur emissions, necessitating smelting process modifications that could also save 20 x 10/sup 12/ Btu (10 x 10/sup 6/ Btu/ton of copper) in smelting energy. Energy use in secondary copper production averages 20 x 10/sup 6/ Btu/ton of copper. If all copper products were recycled, instead of the 30% now salvaged, the energy conservation potential would be about one-half the total energy consumption of the primary copper industry.

  15. Duobaoshan Porphyry Copper Deposit and Its Associated Components

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    @@Duobaoshan porphyry copper deposit, situated in Nenjiang County of Heilongjiang Province, Northeast China, lies tectonically in the Mongolian-Okhotsk geosyncline.Duobaoshan porphyry copper ore field consisting of Duobaoshan copper deposit and Tongshan copper deposit contains rich copper associated with molybdenum, gold, silver and osmium (OsX87). In this sense, this porphyry copper ore field will turn into a large industrial base of copper, gold, silver and osmium. At present, in Duobaoshan porphyry copper deposit occurs a usable B+C+-D grade reserve of 3 276 630ton Cu, 122 920 ton Mo, 87 ton gold and 1 417 ton Ag.

  16. Energy and materials flows in the copper industry

    Energy Technology Data Exchange (ETDEWEB)

    Gaines, L.L.

    1980-12-01

    The copper industry comprises both the primary copper industry, which produces 99.9%-pure copper from copper ore, and the secondary copper industry, which salvages and recycles copper-containing scrap metal to extract pure copper or copper alloys. The United States uses about 2 million tons of copper annually, 60% of it for electrical applications. Demand is expected to increase less than 4% annually for the next 20 years. The primary copper industry is concentrated in the Southwest; Arizona produced 66% of the 1979 total ore output. Primary production uses about 170 x 10/sup 12/ Btu total energy annually (about 100 x 10/sup 6/ Btu/ton pure copper produced from ore). Mining and milling use about 60% of the total consumption, because low-grade ore (0.6% copper) is now being mined. Most copper is extracted by smelting sulfide ores, with concomitant production of sulfur dioxide. Clean air regulations will require smelters to reduce sulfur emissions, necessitating smelting process modifications that could also save 20 x 10/sup 12/ Btu (10 x 10/sup 6/ Btu/ton of copper) in smelting energy. Energy use in secondary copper production averages 20 x 10/sup 6/ Btu/ton of copper. If all copper products were recycled, instead of the 30% now salvaged, the energy conservation potential would be about one-half the total energy consumption of the primary copper industry.

  17. Annual Copper Mountain Conferences on Multigrid and Iterative Methods, Copper Mountain, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    McCormick, Stephen F. [Front Range Scientific, Inc., Lake City, CO (United States)

    2016-03-25

    This project supported the Copper Mountain Conference on Multigrid and Iterative Methods, held from 2007 to 2015, at Copper Mountain, Colorado. The subject of the Copper Mountain Conference Series alternated between Multigrid Methods in odd-numbered years and Iterative Methods in even-numbered years. Begun in 1983, the Series represents an important forum for the exchange of ideas in these two closely related fields. This report describes the Copper Mountain Conference on Multigrid and Iterative Methods, 2007-2015. Information on the conference series is available at http://grandmaster.colorado.edu/~copper/.

  18. Synthesis of copper nanoparticles by electrolysis of DNA utilizing copper as sacrificial anode.

    Science.gov (United States)

    Singh, Dinesh Pratap; Srivastava, Onkar Nath

    2007-06-01

    Copper nanoparticles have been synthesized by anodic oxidation through a simple electrolysis process employing de-oxy ribonucleic acid (DNA) as electrolyte. Platinum was taken as cathode and copper as anode. The applied voltage was 4 V and the electrolysis was performed for duration of 1 h. The copper nanoparticles were prepared in situ from the electron beam irradiation on residues of electrolyte consisting of DNA and copper particles: DNA (Cu) complexes. The size of the nanoparticles ranges between 5-50 nm. A tentative explanation has been given for the formation of copper nanoparticles.

  19. Different pathways for copper sulphate and copper nitrate antioxidation and organic acid excretion in Typha latifolia?

    OpenAIRE

    Lyubenova L.; Kuhn A.; Höltkemeier A.; Bipuah H.; Belford E.; Schröder P.

    2013-01-01

    The major topic of the present experiment was the investigation of the antioxidative enzymes and the root exudate excretion after plant exposure to copper. The copper was added for each treatment as copper sulphate and copper nitrate in the concentrations of 10 μM, 50 μM and 100 μM, respectively. The plant species chosen for the study was Typha latifolia. The experiment gives insight into the plant responses to different copper supplies during the same conditions of exposure. Remarkable resul...

  20. Geomorphology of the lower Copper River, Alaska

    Science.gov (United States)

    Brabets, Timothy P.

    1997-01-01

    The Copper River, located in southcentral Alaska, drains an area of more than 24,000 square miles. About 30 miles above its mouth, this large river enters Miles Lake, a proglacial lake formed by the retreat of Miles Glacier. Downstream from the outlet of Miles Lake, the Copper River flows past the face of Childs Glacier before it enters a large, broad, alluvial flood plain. The Copper River Highway traverses this flood plain and in 1995, 11 bridges were located along this section of the highway. These bridges cross parts of the Copper River and in recent years, some of these bridges have sustained serious damage due to the changing course of the Copper River. Although the annual mean discharge of the lower Copper River is 57,400 cubic feet per second, most of the flow occurs during the summer months from snowmelt, rainfall, and glacial melt. Approximately every six years, an outburst flood from Van Cleve Lake, a glacier-dammed lake formed by Miles Glacier, releases approximately 1 million acre-feet of water into the Copper River. When the outflow rate from Van Cleve Lake reaches it peak, the flow of the Copper River will increase between 150,000 to 190,000 cubic feet per second. Data collected by bedload sampling and continuous seismic reflection indicated that Miles Lake traps virtually all the bedload being transported by the Copper River as it enters the lake from the north. The reservoir-like effect of Miles Lake results in the armoring of the channel of the Copper River downstream from Miles Lake, past Childs Glacier, until it reaches the alluvial flood plain. At this point, bedload transport begins again. The lower Copper River transports 69 million tons per year of suspended sediment, approximately the same quantity as the Yukon River, which drains an area of more than 300,000 square miles. By correlating concurrent flows from a long-term streamflow-gaging station on the Copper River with a short-term streamflow-gaging station at the outlet of Miles Lake

  1. Liver copper concentration in Wilson's disease: effect of treatment with 'anti-copper' agents.

    Science.gov (United States)

    Gibbs, K; Walshe, J M

    1990-01-01

    Serial copper determinations have been made on the livers of 10 patients with Wilson's disease. Two were studied before and eight after the start of treatment in order to assess the effect, if any, on the concentration of the metal. In two patients who were receiving no therapy and in one in whom it had been discontinued, the level of copper rose. In the latter patient, resumption of treatment then resulted in a fall in the level of copper in the liver. A similar fall was seen in seven patients on continuous therapy. In one patient, a very poor complier, there was a tendency for the liver copper concentration to rise over a 5-year period. All three therapies investigated--penicillamine, trientine and tetrathiomolybdate--when taken regularly, appear to be effective in reducing liver copper levels. Sixty-nine single determinations of liver copper have been plotted against time on treatment. This shows that the copper concentration falls rapidly in the first year. Thereafter, there is no linear relationship between the duration of treatment and liver copper. Poor compliers have a higher liver copper concentration than do good compliers. Determinations made from different portions of the liver showed that in only one of 19 examples was there an overlap between the near normal and the abnormal range. The principal mechanism of action of 'anti-copper' agents in Wilson's disease appears to be the mobilization of copper from the tissues, but a secondary detoxifying action may come into play later.

  2. COPPER AND COPPER-CONTAINING PESTICIDES: METABOLISM, TOXICITY AND OXIDATIVE STRESS

    Directory of Open Access Journals (Sweden)

    Viktor Husak

    2015-05-01

    Full Text Available The purpose of this paper is to provide a brief review of the current knowledge regarding metabolism and toxicity of copper and copper-based pesticides in living organisms. Copper is an essential trace element in all living organisms (bacteria, fungi, plants, and animals, because it participates in different metabolic processes and maintain functions of organisms. The transport and metabolism of copper in living organisms is currently the subject of many studies. Copper is absorbed, transported, distributed, stored, and excreted in the body via the complex of homeostatic processes, which provide organisms with a needed constant level of this micronutrient and avoid excessive amounts. Many aspects of copper homeostasis were studied at the molecular level. Copper based-pesticides, in particularly fungicides, bacteriocides and herbicides, are widely used in agricultural practice throughout the world. Copper is an integral part of antioxidant enzymes, particularly copper-zinc superoxide dismutase (Cu,Zn-SOD, and plays prominent roles in iron homeostasis. On the other hand, excess of copper in organism has deleterious effect, because it stimulates free radical production in the cell, induces lipid peroxidation, and disturbs the total antioxidant capacity of the body. The mechanisms of copper toxicity are discussed in this review also.

  3. Three stages of copper accumulation in hepatocellular lysosomes: X-ray microanalysis of copper-loaded golden hamsters.

    OpenAIRE

    Yagi, A.; Hayashi, H; Higuchi, T.; Hishida, N.; Sakamoto, N.

    1992-01-01

    Male golden hamsters were loaded with copper by supplying them for up to 12 weeks with drinking water containing 0.5% cupric acetate. The copper feeding increased hepatic copper to widely varying levels. Energy dispersive X-ray microanalysis could always identify a copper-sulphur complex in the hepatocyte lysosomes of copper-loaded hamsters and the X-ray intensity of copper was found to be a reliable parameter to measure in-situ copper accumulation. Combining this parameter with the copper bi...

  4. Theory of Copper Oxide Superconductors

    CERN Document Server

    Kamimura, Hiroshi; Shunichi Matsuno; Tsuyoshi Hamada

    2005-01-01

    This is an advanced textbook for graduate students and researchers wishing to learn about high temperature superconductivity in copper oxides, in particular the Kamimura-Suwa (K-S) model. Because a number of models have been proposed since the discovery of high temperature superconductivity by Bednorz and Müller in 1986, the book first explains briefly the historical development that led to the K-S model. It then focuses on the physical background necessary to understand the K-S model and on the basic principles behind various physical phenomena such as electronic structures, electrical, thermal and optical properties, and the mechanism of high temperature superconductivity.

  5. Copper Scrap Industry Remained in Cold Winter

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    Beginning from 2012,domestic copper scrap enterprises entered"winter"period,this year the situation further worsened.According to survey,most medium to small sized copper scrap trading enterprises have either closed down,transferred to other businesses,or reduced trading volume,though large trading

  6. Smelting Oxidation Desulfurization of Copper Slags

    Institute of Scientific and Technical Information of China (English)

    LI Lei; HU Jian-hang; WANG Hua

    2012-01-01

    According to the mechanism of sulfur removal easily through oxidation, the process of smelting oxidation desulfurization of copper slags is studied, which supplies a new thinking for obtaining the molten iron of lower sulfur content by smelting reduction of copper slags. Special attention is given to the effects of the holding temperature, the holding time and CaF2, CaO addition amounts on the desulfurization rate of copper slags. The results indicate that the rate of copper slags smelting oxidation desulfurization depends on the matte mass transfer rate through the slag phase. After the oxidation treatment, sulfur of copper slags can be removed as SO2 efficiently. Amount of Ca2+ of copper slags affects the desulfurization rate greatly, and the slag desulfurization rate is reduced by adding a certain amount of CaF2 and CaO. Compared with CaF2, CaO is negative to slags sulfur removal with equal Ca2+ addition. Under the air flow of 0.3 U/min, the sulfur content of copper slags can be reduced to 0. 004 67% in the condition of the holding time of 3 min and the holding temperature of 1 500 ℃. The sulfur content of molten iron is reduced to 0. 000 8 % in the smelting reduction of treated slags, and the problem of high sulfur content of molten iron obtained by smelting reduction with copper slag has been successively solved.

  7. Copper and Aluminium Fabricators in Deep Waters

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The copper processing industry of Yingtan represents over 60% of the provincial fiscal revenue.Due to the fallout of the global finan- cial crisis,most of the 78 copper processing enterprises in Yingtan City have or are about to shut down.In late October,Yingtan city spe-

  8. Spent nuclear fuel rods encapsulated in copper

    Energy Technology Data Exchange (ETDEWEB)

    Hanes, H.D.

    1984-04-01

    Using hot isostatic pressing, spent nuclear fuel rods and other radioactive wastes can be encapsulated in solid copper. The copper capsule which is formed is free of pores and cracks, and is highly resistant to attack by reducing ground waters. Such capsules should contain radioactive materials safely for hundreds of thousands of years in underground storage.

  9. Mesophilic leaching of copper sulphide sludge

    Directory of Open Access Journals (Sweden)

    VLADIMIR B. CVETKOVSKI

    2009-02-01

    Full Text Available Copper was precipitated using a sodium sulphide solution as the precipitation agent from an acid solution containing 17 g/l copper and 350 g/l sulphuric acid. The particle size of nearly 1 µm in the sulphide sludge sample was detected by optical microscopy. Based on chemical and X-ray diffraction analyses, covellite was detected as the major sulphide mineral. The batch bioleach amenability test was performed at 32 °C on the Tk31 mine mesophilic mixed culture using a residence time of 28 days. The dissolution of copper sulphide by direct catalytic leaching of the sulphides with bacteria attached to the particles was found to be worthy, although a small quantity of ferrous ions had to be added to raise the activity of the bacteria and the redox potential of the culture medium. Throughout the 22-day period of the bioleach test, copper recovery based on residue analysis indicated a copper extraction of 95 %, with copper concentration in the bioleach solution of 15 g/l. The slope of the straight line tangential to the exponential part of the extraction curve gave a copper solubilisation rate of 1.1 g/l per day. This suggests that a copper extraction of 95 % for the period of bioleach test of 13.6 days may be attained in a three-stage bioreactor system.

  10. High Copper Amalgam Alloys in Dentistry

    Directory of Open Access Journals (Sweden)

    Gaurav Solanki

    2012-07-01

    Full Text Available Amalgam Restoration is an example of the material giving its name to the process. Amalgam fillings are made up of mercury, powdered silver and tin. They are mixed and packed into cavities in teeth where it hardens slowly and replaces the missing tooth substance. The high copper have become material of choice as compared to low copper alloys nowadays because of their improved mechanical properties, corrosion resistance, better marginal integrity and improved performance in clinical trial. The high copper amalgam was used as a restorative material. The application of high copper amalgam was found to be much more useful than low copper amalgam. High copper had much more strength, corrosion resistance, durability and resistance to tarnish as compared to low copper amalgams. No marked expansion or condensation was noted in the amalgam restoration after its setting after 24 hrs. By using the high copper alloy, the chances of creep were also minimized in the restored tooth. No discomfort or any kind of odd sensation in the tooth was noted after few days of amalgam restoration in the tooth.

  11. China Curbs the Investment in Copper Smelting

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>According to a recent document released by the State Development and Reform Commission (SDRC), the investment in copper smelting by China’s enterprises will be put under strict control so as to prevent the blind investment and duplication in copper smelting projects at low technical standard. The document stipulated a series of conditions including equipment, technology, energy consumption and environmental protection.

  12. Jinchuan Becomes a Shareholder of Huading Copper

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>At the end of 2011, the signing ceremony was held for China Jinchuan Nonferrous Metals Holding Co., Ltd. to become a shareholder of Baotou Huading Copper Development Co., Ltd. As a leading company of the copper deep processing industry in the high-tech rare earth

  13. Cellular copper distribution: a mechanistic systems biology approach.

    Science.gov (United States)

    Banci, Lucia; Bertini, Ivano; Cantini, Francesca; Ciofi-Baffoni, Simone

    2010-08-01

    Copper is an essential but potentially harmful trace element required in many enzymatic processes involving redox chemistry. Cellular copper homeostasis in mammals is predominantly maintained by regulating copper transport through the copper import CTR proteins and the copper exporters ATP7A and ATP7B. Once copper is imported into the cell, several pathways involving a number of copper proteins are responsible for trafficking it specifically where it is required for cellular life, thus avoiding the release of harmful free copper ions. In this study we review recent progress made in understanding the molecular mechanisms of copper transport in cells by analyzing structural features of copper proteins, their mode of interaction, and their thermodynamic and kinetic parameters, thus contributing to systems biology of copper within the cell.

  14. Solar thermal extraction of copper from sulfides

    Energy Technology Data Exchange (ETDEWEB)

    Winkel, L.; Guesdon, C.; Sturzenegger, M.

    2003-03-01

    With the aim to develop a solar-driven process for the extraction of copper from sulfide concentrates re-search on the decomposition of copper sulfides under inert atmospheres has been initiated. Thermogravimetric measurements on chalcocite (Cu{sub 2}S) revealed that copper is formed already at 1823 K. Chalcopyrite (CuFeS{sub 2}) also disintegrates at this temperature, although at a lower rate. Copper and iron have been identified in the solid residue. The results confirm the feasibility of copper extraction by direct decomposition of sulfides under atmospheric pressure. The decomposition under inert atmosphere prevents generation of SO{sub 2}, and is beneficial to the removal of volatile impurities. Chemical equilibrium calculations for CuFeS{sub 2} contaminated with enargite (Cu{sub 3}AsS{sub 4}) have shown that the absence of an oxidic slag allows for a complete evaporation of arsenic and subsequent separation. (author)

  15. Bioremediation: Copper Nanoparticles from Electronic-waste

    Directory of Open Access Journals (Sweden)

    D. R. MAJUMDER

    2012-10-01

    Full Text Available A single-step eco-friendly approach has been employed to synthesize copper nanoparticles. The superfast advancement in the field of electronics has given rise to a new type of waste called electronic waste. Since the physical and chemical recycling procedures have proved to be hazardous, the present work aims at the bioremediation of e-waste in order to recycle valuable metals. Microorganisms such as Fusarium oxysporum and Pseudomonas sp. were able to leach copper (84-130 nm from integrated circuits present on electronic boards under ambient conditions. Lantana camara, a weed commonly found in Maharashtra was also screened for leaching copper. The characteristics of the copper nanoparticles obtained were studied using X-ray diffraction analysis, energy-dispersive spectroscopy, scanning electron microscopy, Fourier Tranform Infrared analysis, Transmission electron microscopy, Thermogravimetric analysis and Cyclic Voltammetry. Copper nanoparticles were found to be effective against hospital strain Escherichia coli 2065.

  16. Xinjiang to Build Its Largest Copper Mine

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>On September 16, the 6,000,000-ton mining project of Hudehe Copper Mine kicked off, which is the largest copper mine in Xinjiang.Jointly developed by Xinjiang Nonferrous Metals Group and Gansu Jianxin Group, Hudehe Copper Mine is located at Tuoli County, Tacheng Prefecture, Xinjiang. It is a large-scale porphyry-type copper deposit with proven copper reserve of 362,500 tons and prospective reserve of 1,000,000 tons(metal content). According to the preliminary plan, it will be built into a mine with mining and dressing capacity of 6,000,000 tons/year. With a total investment of RMB 1.466 billion, the project is expected to achieve annual sales revenue of RMB 0.8 billion and provide jobs for nearly 1,000 people.

  17. An Analysis of Contemporary Copper Recycling in China

    Institute of Scientific and Technical Information of China (English)

    YUE Qiang; LU Zhong-wu

    2006-01-01

    Copper consumption increased very quickly in China in recent years, which could not be met by inland copper industry. In order to achieve a sustainable development of copper industry, an analysis of copper recycling in China was necessary. For the life cycle of copper products a copper-flow diagram with time factor was worked out and the contemporary copper recycling in China was analyzed, from which the following data were obtained. The average life cycle of copper products was 30 years. From 1998 to 2002, the use ratio of copper scraps in copper production, the use ratio of copper scraps in copper manufacture, the materials self-support ratio in copper production, and the materials self-support ratio in copper manufacture were 26.50%, 15.49%, 48.05% and 59.41%, respectively. The materials self-support ratios in copper production and manufacture declined year by year in recent years on the whole, and the latter dropped more quickly. The average index of copper ore and copper scrap from 1998 to 2002 were 0.8475 t/t and 0.0736 t/t, respectively; and copper resource efficiency was 1.1855 t/t. Some efforts should be paid to reduce copper ores consumption and promote copper scraps regeneration.Copper scraps were mostly imported from foreign countries because of shortage in recent years in China. Here the reasons related to copper scraps deficiency were also demonstrated. But we can forecast: when copper production was in a slow rise or in a steady state in China, the deficiency of copper scraps may be mitigated; when copper production was in a steady state for a very long time, copper scraps may become relatively abundant. According to the status of copper industry in China, the raw materials of copper production and manufacture have to depend on oversea markets heavily in recent years, and at the same time, the copper scraps using proportion and efficiency in copper industry should be improved.

  18. Surface films and corrosion of copper

    Energy Technology Data Exchange (ETDEWEB)

    Hilden, J.; Laitinen, T.; Maekelae, K.; Saario, T.; Bojinov, M. [VTT Manufacturing Technology, Espoo (Finland)

    1999-03-01

    In Sweden and Finland the spent nuclear fuel is planned to be encapsulated in cast iron canisters that have an outer shield made of copper. The copper shield is responsible for the corrosion protection of the canister construction. General corrosion of the copper is not expected to be the limiting factor in the waste repository environment when estimating the life-time of the canister construction. However, different forms of localised corrosion, i.e. pitting, stress corrosion cracking, or environmentally assisted creep fracture may cause premature failure of the copper shield. Of the probable constituents in the groundwater, nitrites, chlorides, sulphides and carbonates have been suggested to promote localised corrosion of copper. The main assumption made in planning this research program is that the surface films forming on copper in the repository environment largely determine the susceptibility of copper to the different forms of localised corrosion. The availability of reactants, which also may become corrosion rate limiting, is investigated in several other research programs. This research program consists of a set of successive projects targeted at characterising the properties of surface films on copper in repository environment containing different detrimental anions. A further aim was to assess the significance of the anion-induced changes in the stability of the oxide films with regard to localised corrosion of copper. This report summarises the results from a series of investigations on properties of surface films forming on copper in water of pH = 8.9 at temperature of 80 deg C and pressure of 2 MPa. The main results gained so far in this research program are as follows: The surface films forming on copper in the thermodynamic stability region of monovalent copper at 80 deg C consist of a bulk part (about 1 mm thick) which is a good ionic and electronic conductor, and an outer, interfacial layer (0.001 - 0.005 mm thick) which shows p-type semiconductor

  19. [Atomic absorption spectrophotometry study of copper ion release by copper-bearing intrauterine devices].

    Science.gov (United States)

    Berthou, J; Chrétien, F C; Driguez, P A

    1998-11-01

    Copper release from copper-bearing IUD's was studied in vitro and in vivo using atomic absorption spectrophotometry in deionized water, normal saline solution and normal ovulatory cervical mucus. In these media, copper release from a 375 mm2 DIU occurs without latency, showing comparable amounts for identical time intervals. Daily copper release was shown to be respectively 8 and 11 times higher in cervical mucus and normal saline solution than in deionized water. Although copper ions are detectable in ovulatory cervical mucus under physiological conditions, the copper content appears 5 to 6 times higher in women bearing a copper IUD. Obviously, the copper amount is dependent on the copper exposed surface: the daily in vitro release from a 250 mm2 IUD is 18% inferior to that observed from a 375 mm2 model. In vivo, the daily copper release in ovulatory mucus of 380 or 200 mm2 IUD users is respectively 5 and 3.5 times higher than in controls.

  20. Molecular responses of mouse macrophages to copper and copper oxide nanoparticles inferred from proteomic analyses.

    Science.gov (United States)

    Triboulet, Sarah; Aude-Garcia, Catherine; Carrière, Marie; Diemer, Hélène; Proamer, Fabienne; Habert, Aurélie; Chevallet, Mireille; Collin-Faure, Véronique; Strub, Jean-Marc; Hanau, Daniel; Van Dorsselaer, Alain; Herlin-Boime, Nathalie; Rabilloud, Thierry

    2013-11-01

    The molecular responses of macrophages to copper-based nanoparticles have been investigated via a combination of proteomic and biochemical approaches, using the RAW264.7 cell line as a model. Both metallic copper and copper oxide nanoparticles have been tested, with copper ion and zirconium oxide nanoparticles used as controls. Proteomic analysis highlighted changes in proteins implicated in oxidative stress responses (superoxide dismutases and peroxiredoxins), glutathione biosynthesis, the actomyosin cytoskeleton, and mitochondrial proteins (especially oxidative phosphorylation complex subunits). Validation studies employing functional analyses showed that the increases in glutathione biosynthesis and in mitochondrial complexes observed in the proteomic screen were critical to cell survival upon stress with copper-based nanoparticles; pharmacological inhibition of these two pathways enhanced cell vulnerability to copper-based nanoparticles, but not to copper ions. Furthermore, functional analyses using primary macrophages derived from bone marrow showed a decrease in reduced glutathione levels, a decrease in the mitochondrial transmembrane potential, and inhibition of phagocytosis and of lipopolysaccharide-induced nitric oxide production. However, only a fraction of these effects could be obtained with copper ions. In conclusion, this study showed that macrophage functions are significantly altered by copper-based nanoparticles. Also highlighted are the cellular pathways modulated by cells for survival and the exemplified cross-toxicities that can occur between copper-based nanoparticles and pharmacological agents.

  1. Molecular Responses of Mouse Macrophages to Copper and Copper Oxide Nanoparticles Inferred from Proteomic Analyses*

    Science.gov (United States)

    Triboulet, Sarah; Aude-Garcia, Catherine; Carrière, Marie; Diemer, Hélène; Proamer, Fabienne; Habert, Aurélie; Chevallet, Mireille; Collin-Faure, Véronique; Strub, Jean-Marc; Hanau, Daniel; Van Dorsselaer, Alain; Herlin-Boime, Nathalie; Rabilloud, Thierry

    2013-01-01

    The molecular responses of macrophages to copper-based nanoparticles have been investigated via a combination of proteomic and biochemical approaches, using the RAW264.7 cell line as a model. Both metallic copper and copper oxide nanoparticles have been tested, with copper ion and zirconium oxide nanoparticles used as controls. Proteomic analysis highlighted changes in proteins implicated in oxidative stress responses (superoxide dismutases and peroxiredoxins), glutathione biosynthesis, the actomyosin cytoskeleton, and mitochondrial proteins (especially oxidative phosphorylation complex subunits). Validation studies employing functional analyses showed that the increases in glutathione biosynthesis and in mitochondrial complexes observed in the proteomic screen were critical to cell survival upon stress with copper-based nanoparticles; pharmacological inhibition of these two pathways enhanced cell vulnerability to copper-based nanoparticles, but not to copper ions. Furthermore, functional analyses using primary macrophages derived from bone marrow showed a decrease in reduced glutathione levels, a decrease in the mitochondrial transmembrane potential, and inhibition of phagocytosis and of lipopolysaccharide-induced nitric oxide production. However, only a fraction of these effects could be obtained with copper ions. In conclusion, this study showed that macrophage functions are significantly altered by copper-based nanoparticles. Also highlighted are the cellular pathways modulated by cells for survival and the exemplified cross-toxicities that can occur between copper-based nanoparticles and pharmacological agents. PMID:23882024

  2. Evaluation of copper resistant bacteria from vineyard soils and mining waste for copper biosorption

    Science.gov (United States)

    Andreazza, R.; Pieniz, S.; Okeke, B.C.; Camargo, F.A.O

    2011-01-01

    Vineyard soils are frequently polluted with high concentrations of copper due application of copper sulfate in order to control fungal diseases. Bioremediation is an efficient process for the treatment of contaminated sites. Efficient copper sorption bacteria can be used for bioremoval of copper from contaminated sites. In this study, a total of 106 copper resistant bacteria were examined for resistance to copper toxicity and biosorption of copper. Eighty isolates (45 from vineyard Mollisol, 35 from Inceptisol) were obtained from EMBRAPA (Empresa Brasileira de Pesquisa Agropecuária) experimental station, Bento Gonçalves, RS, Brazil (29°09′53.92″S and 51°31′39.40″W) and 26 were obtained from copper mining waste from Caçapava do Sul, RS, Brazil (30°29′43.48″S and 53′32′37.87W). Based on resistance to copper toxicity and biosorption, 15 isolates were identified by 16S rRNA gene sequencing. Maximal copper resistance and biosorption at high copper concentration were observed with isolate N2 which removed 80 mg L−1 in 24 h. Contrarily isolate N11 (Bacillus pumilus) displayed the highest specific copper biosorption (121.82 mg/L/OD unit in 24 h). GenBank MEGABLAST analysis revealed that isolate N2 is 99% similar to Staphylococcus pasteuri. Results indicate that several of our isolates have potential use for bioremediation treatment of vineyards soils and mining waste contaminated with high copper concentration. PMID:24031606

  3. Kinetics of the conversion of copper sulfide to blister copper

    Directory of Open Access Journals (Sweden)

    Carrillo, F.

    2002-10-01

    Full Text Available The desulfurization of copper sulfide by air and oxygen has been studied in two laboratory reactors where the gas is blown onto the melt surface. Rates of oxidation in a vertical resistance furnace may be explained by the mass transfer control in the gas phase. However, results for a horizontal tube suggest that the chemical resistance is controlling.

    La desulfuración del sulfuro cuproso con aire y oxígeno se ha estudiado en dos reactores de laboratorio, en los cuales el gas se sopla sobre la superficie del fundido. La velocidad de reacción en un horno de resistencias verticales se puede explicar considerando como controlante la resistencia a la transferencia de materia de la fase gas. Sin embargo, los resultados del horno horizontal indican que la resistencia química es la controlante.

  4. Relapsing hypocupraemic myelopathy requiring high‐dose oral copper replacement

    OpenAIRE

    Prodan, C.I.; Bottomley, S S; Holland, N R; Lind, S. E.

    2006-01-01

    Adult‐onset copper deficiency with neurological manifestations is a newly recognised syndrome. Long‐term oral copper replacement therapy has been the mainstay of treatment in the literature. A case of relapsing hypocupraemic myelopathy responsive to increased doses of copper replacement is reported. Standard doses of copper may not be sufficient for all patients.

  5. The various faces of copper in laboratory animals

    NARCIS (Netherlands)

    Wolf, Ingeborg Désirée de

    2001-01-01

    All research described in this thesis focuses on the role of copper in various biochemical processes. It appears that copper has various faces in laboratory animals. On the one hand, copper is an essential trace element, which implicates that a certain requirement for copper exists. On the other

  6. China’s Copper Industry Development and the Prospects

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>Since the founding of the People’s Republic, China has given priority to the development of the copper industry, and for a long period of time, copper industry has been placed in the first categories of the industry development in China. Nevertheless, due to the restricted copper resources, the copper mining industry development was rather slow and by the end of

  7. Tarnished copper IUDs still safe and effective.

    Science.gov (United States)

    1989-01-01

    Due to the presence of tarnish on copper T 380A (TCU 380A) intrauterine devices (IUDs) still in their wrappers, family planning providers in developing countries were concerned over their safety and effectiveness. This article explains why there is tarnish on the copper IUDs and why these IUDs are still sterile as long as their packaging is intact. The Population Council and Finishing Enterprises, the developer and the manufacturer of the devise respectively, along with several chemists, have determined that the tarnishing in no way reflects the sterility of the IUD. The IUD packages are permeable to gases but impermeable to microorganisms so that packages of IUDs can be sterilized with ethylene oxide and then stay sterile because no microorganisms can get to the IUD. Tarnishing is caused by the normal oxidation of copper which gives a surface layer of copper oxide. Normally, this surface layer is too thin to be visible, but 10% of the time a thicker layer of copper oxide or what is called "tarnishing" develops on copper IUDs. Copper IUDs have the same efficiency whether or not they are tarnished. Finishing Enterprises is now conducting research on how to slow down the oxidation process.

  8. Electrochromism in copper oxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, T.J.; Slack, J.L.; Rubin, M.D.

    2000-08-15

    Transparent thin films of copper(I) oxide prepared on conductive SnO2:F glass substrates by anodic oxidation of sputtered copper films or by direct electrodeposition of Cu2O transformed reversibly to opaque metallic copper films when reduced in alkaline electrolyte. In addition, the same Cu2O films transform reversibly to black copper(II) oxide when cycled at more anodic potentials. Copper oxide-to-copper switching covered a large dynamic range, from 85% and 10% photopic transmittance, with a coloration efficiency of about 32 cm2/C. Gradual deterioration of the switching range occurred over 20 to 100 cycles. This is tentatively ascribed to coarsening of the film and contact degradation caused by the 65% volume change on conversion of Cu to Cu2O. Switching between the two copper oxides (which have similar volumes) was more stable and more efficient (CE = 60 cm2/C), but covered a smaller transmittance range (60% to 44% T). Due to their large electrochemical storage capacity and tolerance for alkaline electrolytes, these cathodically coloring films may be useful as counter electrodes for anodically coloring electrode films such as nickel oxide or metal hydrides.

  9. Fully additive copper metallization on BCB

    Energy Technology Data Exchange (ETDEWEB)

    Stolle, T. [FhG-IZM Berlin (Germany); Schwencke, B.; Reichl, H.

    2000-07-01

    A fully additive copper metallization process on benzocyclobutene cyclotene trademark (BCB) has been investigated for application in MCM-D technology. The process consists of surface pretreatment of the BCB basic layer by reactive ion etching (RIE), spin-coating and photopatterning of an organic seed layer by broad-band I-line photolithography followed by developing and activation steps. The metallization of the seed patterns is performed by a 2-step process by means of electroless copper baths. A height of about 5 {mu}m selectively deposited copper can be achieved. The electrical conductivity of patterns is in the range of 80% - 85% of the bulk conductivity of pure copper. Adhesive strength tests during accelerated aging show good adhesion of copper to the BCB surface, which is influenced by RIE pretreatment, exposure dose and thermal load. Shear experiments performed with optimal treated 200 x 200 {mu}m bumps show shear forces > 150 cN. Design rules have to take into account the lateral growth of copper patterns, which is nearly equal to the vertical growth. Real spaces of {>=} 30 {mu}m between copper lines are possible. The process is considered as a low cost technology because of replacing of sputter technique, few process steps and waste reduction. (orig.)

  10. Electron Percolation In Copper Infiltrated Carbon

    Science.gov (United States)

    Krcho, Stanislav

    2015-11-01

    The work describes the dependence of the electrical conductivity of carbon materials infiltrated with copper in a vacuum-pressure autoclave on copper concentration and on the effective pore radius of the carbon skeleton. In comparison with non-infiltrated material the electrical conductivity of copper infiltrated composite increased almost 500 times. If the composite contained less than 7.2 vol% of Cu, a linear dependence of the electrical conductivity upon cupper content was observed. If infiltrated carbon contained more than 7.2 vol% of Cu, the dependence was nonlinear - the curve could be described by a power formula (x - xc)t. This is a typical formula describing the electron percolation process in regions containing higher Cu fraction than the critical one. The maximum measured electrical conductivity was 396 × 104 Ω-1 m-1 for copper concentration 27.6 vol%. Experiments and analysis of the electrical conductivity showed that electron percolation occurred in carbon materials infiltrated by copper when the copper volume exceeded the critical concentration. The analysis also showed a sharp increase of electrical conductivity in composites with copper concentration higher than the threshold, where the effective radius of carbon skeleton pores decreased to 350 nanometres.

  11. The Effective Electrolytic Recovery of Dilute Copper from Industrial Wastewater

    Directory of Open Access Journals (Sweden)

    Teng-Chien Chen

    2013-01-01

    Full Text Available Electroplating copper industry was discharged huge amount wastewater and cause serious environmental and health damage in Taiwan. This research applied electrical copper recovery system to recover copper metal. In this work, electrotreatment of a industrial copper wastewater ([Cu] = 30000 mg L−1 was studied with titanium net coated with a thin layer of RuO2/IrO2 (DSA reactor. The optimal result for simulated copper solution was 99.9% copper recovery efficiency in current density 0.585 A/dm2 and no iron ion. Due to high concentration of iron and chloride ions in real industrial wastewater, the copper recovery efficiency was down to 60%. Although, the copper recovery efficiency was not high as simulated copper solution, high environmental economic value was included in the technology. The possibility of pretreating the wastewater with iron is the necessary step, before the electrical recovery copper system.

  12. In situ deposits of copper and copper oxide containing condensation polyimide films

    Science.gov (United States)

    Porta, G. M.; Taylor, L. T.

    1987-01-01

    Novel copper-polyimide composites have been synthesized via simultaneous thermal decomposition of solid solutions of bis (trifluoroacetylacetonato) copper (II) and thermal cyclodehydration of polyimide acid. In contrast to conventional filled polymer composites which are prepared by dispersion of particles or fibers in a polymer matrix this study has yielded in general uniform Cu or CuO dispersions of very small particle size that reside near the film surface that was exposed to the atmosphere during curing. The nature of the copper deposit, the thickness of the copper deposit, and the polyimide overlayer which bonds the copper to the polymer substrate depend on the curing atmosphere used. A variety of analytical surface methods along with thermogravimetric analysis and variable temperature (surface and volume) electrical resistivity measurements have been used to characterize these thin, flexible copper doped polyimide films.

  13. Copper localization, elemental content, and thallus colour in the copper hyperaccumulator lichen Lecanora sierrae from California

    Science.gov (United States)

    Purvis, O.W.; Bennett, J.P.; Spratt, J.

    2011-01-01

    An unusual dark blue-green lichen, Lecanora sierrae, was discovered over 30 years ago by Czehura near copper mines in the Lights Creek District, Plumas County, Northern California. Using atomic absorption spectroscopy, Czehura found that dark green lichen samples from Warren Canyon contained 4% Cu in ash and suggested that its colour was due to copper accumulation in the cortex. The present study addressed the hypothesis that the green colour in similar material we sampled from Warren Canyon in 2008, is caused by copper localization in the thallus. Optical microscopy and electron microprobe analysis of specimens of L. sierrae confirmed that copper localization took place in the cortex. Elemental analyses of L. sierrae and three other species from the same localities showed high enrichments of copper and selenium, suggesting that copper selenates or selenites might occur in these lichens and be responsible for the unusual colour. Copyright ?? 2011 British Lichen Society.

  14. Copper localization, elemental content, and thallus colour in the copper hyperaccumulator lichen Lecanora sierra from California

    Science.gov (United States)

    Purvis, O.W.; Bennett, J.P.; Spratt, J.

    2011-01-01

    An unusual dark blue-green lichen, Lecanora sierrae, was discovered over 30 years ago by Czehura near copper mines in the Lights Creek District, Plumas County, Northern California. Using atomic absorption spectroscopy, Czehura found that dark green lichen samples from Warren Canyon contained 4% Cu in ash and suggested that its colour was due to copper accumulation in the cortex. The present study addressed the hypothesis that the green colour in similar material we sampled from Warren Canyon in 2008, is caused by copper localization in the thallus. Optical microscopy and electron microprobe analysis of specimens of L. sierrae confirmed that copper localization took place in the cortex. Elemental analyses of L. sierrae and three other species from the same localities showed high enrichments of copper and selenium, suggesting that copper selenates or selenites might occur in these lichens and be responsible for the unusual colour.

  15. Thermodynamic Study on Process in Copper Converters (The Copper-making Stage)

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Theoretical calculations were based on thermodynamic equilibrium in the multi-component and multi-phase system with heat and mass balance as well as the oxygen efficiency to take account for the effects of process kinetics. The variations of temperature, mass fractions of dissolved oxygen and sulfur in blister copper, partial pressures for O2, S2, SO2 in gas phase for the copper-making stage were calculated. The model predicted temperature, time of blowing as well as mass of the blister copper at end points for 6 heats showed a fairly good agreements with corresponding plant data. The calculated content of 0.065% and content of 0.87% in blister copper were both at reasonable levels. Compared with the so called Goto model, the present model has very much improved process description of copper-making stage as well as the prediction of end points for a copper converter by introducing the oxygen efficiency.

  16. Jiangrun Copper Limited Company Set its Eyes on the Leading Position of Copper Processing Industry in China

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>Jiangrun Copper Limited Company’s total investment volume for projects of stranded copper wire with high strength and high conductivity as well as high-performance copper and copper alloy wire are 500 million yuan and 360 million yuan, respectively. The company plans to introduce 85 units (sets) of high-end

  17. Activation of ADAM 12 protease by copper

    DEFF Research Database (Denmark)

    Loechel, F; Wewer, Ulla M.

    2001-01-01

    Conversion of latent proteases to the active form occurs by various mechanisms characteristic for different protease families. Here we report that the disintegrin metalloprotease ADAM 12-S is activated by Cu(II). Copper activation is distinct from the cysteine switch component of latency......: elimination of the ADAM 12 cysteine switch by a point mutation in the propeptide had no effect on copper activation, whereas mutation of an unpaired cysteine residue in the catalytic domain resulted in a mutant form of ADAM 12-S that was insensitive to copper. This suggests a multi-step activation mechanism...

  18. Graphene-protected copper and silver plasmonics

    DEFF Research Database (Denmark)

    Kravets, V. G.; Jalil, R.; Kim, Y. J.

    2014-01-01

    suitable for plasmonic applications. To this end, there has been a continuous search for alternative plasmonic materials that are also compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered...... with one to a few graphene layers show excellent plasmonic characteristics. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic...... waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate wide use of graphene-protected plasmonics....

  19. Nanocrystalline Ni-W coatings on copper

    Energy Technology Data Exchange (ETDEWEB)

    Panagopoulos, C.N., E-mail: chpanag@metal.ntua.gr [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece); Plainakis, G.D.; Lagaris, D.A. [Laboratory of Physical Metallurgy, National Technical University of Athens, Zografos, 15780, Athens (Greece)

    2011-04-15

    Nanocrystalline Ni-W coatings were produced on copper substrates with the aid of electrodeposition technique. The morphology, chemical composition and structure of the produced coatings were examined with the aid of scanning electron microscopy (SEM), electron dispersive spectroscopy (EDS) and X-ray diffraction (XRD) techniques. The microhardness of alloy Ni-W coatings on copper substrate was also studied. The adhesion between the Ni-W coating, having W content 50 wt%, and the copper substrate, was also studied with a scratch testing apparatus. The scratch tests resulted in the coatings suffering an intensive brittle fracture and minor delamination.

  20. Dietary Management of Labrador Retrievers with Subclinical Hepatic Copper Accumulation

    OpenAIRE

    Fieten, H.; Biourge, V.C.; Watson, A.L.; Leegwater, P.A.J.; van den Ingh, T.S.G.A.M.; Rothuizen, J.

    2015-01-01

    Background Genetic and environmental factors, including dietary copper intake, contribute to the pathogenesis of copper‐associated hepatitis in Labrador retrievers. Clinical disease is preceded by a subclinical phase in which copper accumulates in the liver. Objective To investigate the effect of a low‐copper, high‐zinc diet on hepatic copper concentration in Labrador retrievers with increased hepatic copper concentrations. Animals Twenty‐eight clinically healthy, client‐owned Labrador retrie...

  1. Evolution of Copper Transporting ATPases in Eukaryotic Organisms

    OpenAIRE

    Gupta, Arnab; Lutsenko, Svetlana

    2012-01-01

    Copper is an essential nutrient for most life forms, however in excess it can be harmful. The ATP-driven copper pumps (Copper-ATPases) play critical role in living organisms by maintaining appropriate copper levels in cells and tissues. These evolutionary conserved polytopic membrane proteins are present in all phyla from simplest life forms (bacteria) to highly evolved eukaryotes (Homo sapiens). The presumed early function in metal detoxification remains the main function of Copper-ATPases i...

  2. Copper adsorption in tropical oxisols

    Directory of Open Access Journals (Sweden)

    Silveira Maria Lucia Azevedo

    2003-01-01

    Full Text Available Cu adsorption, at concentrations between 0 to 800 mg L-1, was evaluated in surface and subsurface samples of three Brazilian soils: a heavy clayey-textured Rhodic Hapludalf (RH, a heavy clayey-textured Anionic ''Rhodic'' Acrudox (RA and a medium-textured Anionic ''Xanthic'' Acrudox (XA. After adsorption, two consecutive extractions were performed to the samples which received 100 mg L-1 copper. Surface samples adsorbed higher amounts of Cu than the subsurface, and exhibited lower Cu removed after the extractions, reinforcing the influence of the organic matter in the reactions. Cu adsorption was significant in the subsurface horizons of the Oxisols, despite the positive balance of charge, demonstrating the existence of mechanisms for specific adsorption, mainly related to the predominance of iron and aluminum oxides in the mineral fractions. In these samples, Cu was easily removed from the adsorption sites. RH demonstrated a higher capacity for the Cu adsorption in both horizons.

  3. Metallochaperones regulate intracellular copper levels.

    Directory of Open Access Journals (Sweden)

    W Lee Pang

    Full Text Available Copper (Cu is an important enzyme co-factor that is also extremely toxic at high intracellular concentrations, making active efflux mechanisms essential for preventing Cu accumulation. Here, we have investigated the mechanistic role of metallochaperones in regulating Cu efflux. We have constructed a computational model of Cu trafficking and efflux based on systems analysis of the Cu stress response of Halobacterium salinarum. We have validated several model predictions via assays of transcriptional dynamics and intracellular Cu levels, discovering a completely novel function for metallochaperones. We demonstrate that in addition to trafficking Cu ions, metallochaperones also function as buffers to modulate the transcriptional responsiveness and efficacy of Cu efflux. This buffering function of metallochaperones ultimately sets the upper limit for intracellular Cu levels and provides a mechanistic explanation for previously observed Cu metallochaperone mutation phenotypes.

  4. Copper Homeostasis in Mycobacterium tuberculosis

    Science.gov (United States)

    Shi, Xiaoshan; Darwin, K. Heran

    2015-01-01

    Copper (Cu) is a trace element essential for the growth and development of almost all organisms, including bacteria. However, Cu overload in most systems is toxic. Studies show Cu accumulates in macrophage phagosomes infected with bacteria, suggesting Cu provides an innate immune mechanism to combat invading pathogens. To counteract the host-supplied Cu, increasing evidence suggests that bacteria have evolved Cu resistance mechanisms to facilitate their pathogenesis. In particular, Mycobacterium tuberculosis (Mtb), the causative agent of tuberculosis, has evolved multiple pathways to respond to Cu. Here, we summarize what is currently known about Cu homeostasis in Mtb and discuss potential sources of Cu encountered by this and other pathogens in a mammalian host. PMID:25614981

  5. China Metallurgical Group and Jiangxi Copper Having Signed Agreement on Copper Mines with Afghanistan

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>On May 25,the joint investment combo formed by China Metallurgical Group Corp.(MCC) and Jiangxi Copper Co.has formally signed agreement with Afghan government in Kabul on the exploitation of Aynak copper mine.The mine is situated in the north of Loghar in the middle east of Afghanistan,which is about 35km from the Capital City of Kabul.The ex- tra-large copper mine was found at the begin-

  6. Outlook for China’s Copper Rod & Copper Wire Markets-Part Ⅰ

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>Along with its economic development,China is growing in its demand for copper material,and the Chinese copper processing industry has got into the period of rapid expansion.During2001-2009,output of copper material was growing by nearly 20%annually in this country.In 2009,fueled by the national economic stimulus policy,the output hit a high of 22.2%.Since 2009,it has been growing by nearly 12% annually.

  7. The general situation of the production of copper foil for copper clad laminate in China Mainland

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The"Report of Survey & Analysis on copper clad laminate industry in China Mainland"from copper clad laminate branch of China Electronic Material Industrial Association showed that in spite of several unfavorable fac- tors confronted by the whole industry including the large up-rise of raw material price of copper foil,the appreciation of RMB currency,the ad- justment of export policies and the implementa- tion of 2 orders on environmental protection

  8. Metallic copper corrosion rates, moisture content, and growth medium influence survival of copper ion-resistant bacteria

    DEFF Research Database (Denmark)

    Elguindi, J; Moffitt, S; Hasman, Henrik

    2010-01-01

    The rapid killing of various bacteria in contact with metallic copper is thought to be influenced by the influx of copper ions into the cells, but the exact mechanism is not fully understood. This study showed that the kinetics of contact killing of copper surfaces depended greatly on the amount...... of moisture present, copper content of alloys, type of medium used, and type of bacteria. We examined antibiotic- and copper ion-resistant strains of Escherichia coli and Enterococcus faecium isolated from pig farms following the use of copper sulfate as feed supplement. The results showed rapid killing...... of both copper ion-resistant E. coli and E. faecium strains when samples in rich medium were spread in a thin, moist layer on copper alloys with 85% or greater copper content. E. coli strains were rapidly killed under dry conditions, while E. faecium strains were less affected. Electroplated copper...

  9. Functional understanding of the versatile protein copper metabolism MURR1 domain 1 (COMMD1) in copper homeostasis.

    Science.gov (United States)

    Fedoseienko, Alina; Bartuzi, Paulina; van de Sluis, Bart

    2014-05-01

    Copper is an important cofactor in numerous biological processes in all living organisms. However, excessive copper can be extremely toxic, so it is vital that the copper level within a cell is tightly regulated. The damaging effect of copper is seen in several hereditary forms of copper toxicity in humans and animals. At present, Wilson's disease is the best-described and best-studied copper-storage disorder in humans; it is caused by mutations in the ATP7B gene. In dogs, a mutation in the COMMD1 gene has been found to be associated with copper toxicosis. Using a liver-specific Commd1 knockout mouse, the biological role of Commd1 in copper homeostasis has been confirmed. Yet, the exact mechanism by which COMMD1 regulates copper homeostasis is still unknown. Here, we give an overview of the current knowledge and perspectives on the molecular function of COMMD1 in copper homeostasis.

  10. Kinetics and mechanisms of reactions between H2O2 and copper and copper oxides.

    Science.gov (United States)

    Björkbacka, Åsa; Yang, Miao; Gasparrini, Claudia; Leygraf, Christofer; Jonsson, Mats

    2015-09-28

    One of the main challenges for the nuclear power industry today is the disposal of spent nuclear fuel. One of the most developed methods for its long term storage is the Swedish KBS-3 concept where the spent fuel is sealed inside copper canisters and placed 500 meters down in the bedrock. Gamma radiation will penetrate the canisters and be absorbed by groundwater thereby creating oxidative radiolysis products such as hydrogen peroxide (H2O2) and hydroxyl radicals (HO˙). Both H2O2 and HO˙ are able to initiate corrosion of the copper canisters. In this work the kinetics and mechanism of reactions between the stable radiolysis product, H2O2, and copper and copper oxides were studied. Also the dissolution of copper into solution after reaction with H2O2 was monitored by ICP-OES. The experiments show that both H2O2 and HO˙ are present in the systems with copper and copper oxides. Nevertheless, these species do not appear to influence the dissolution of copper to the same extent as observed in recent studies in irradiated systems. This strongly suggests that aqueous radiolysis can only account for a very minor part of the observed radiation induced corrosion of copper.

  11. Speciation and leachability of copper in mine tailings from porphyry copper mining

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Yianatos, Juan B; Ottosen, Lisbeth M.

    2005-01-01

    Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150mgkg^-^1 dry...... matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212@mm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order...

  12. Effect of fission neutron irradiation on the tensile and electrical properties of copper and copper alloys

    Energy Technology Data Exchange (ETDEWEB)

    Fabritsiev, S.A. [D.V. Efremov Institute, St. Petersburg (Russian Federation); Zinkle, S.J.; Rowcliffe, A.F. [Oak Ridge National Lab., TN (United States)] [and others

    1995-04-01

    The objective of this study is to evaluate the properties of several copper alloys following fission reactor irradiation at ITER-relevant temperatures of 80 to 200{degrees}C. This study provides some of the data needed for the ITER research and development Task T213. These low temperature irradiations caused significant radiation hardening and a dramatic decrease in the work hardening ability of copper and copper alloys. The uniform elongation was higher at 200{degree}C compared to 100{degree}C, but still remained below 1% for most of the copper alloys.

  13. Effects of stimulation of copper bioleaching on microbial community in vineyard soil and copper mining waste.

    Science.gov (United States)

    Andreazza, Robson; Okeke, Benedict C; Pieniz, Simone; Bortolon, Leandro; Lambais, Márcio R; Camargo, Flávio A O

    2012-04-01

    Long-term copper application in vineyards and copper mining activities cause heavy metal pollution sites. Such sites need remediation to protect soil and water quality. Bioremediation of contaminated areas through bioleaching can help to remove copper ions from the contaminated soils. Thus, the aim of this work was to evaluate the effects of different treatments for copper bioleaching in two diverse copper-contaminated soils (a 40-year-old vineyard and a copper mining waste) and to evaluate the effect on microbial community by applying denaturing gradient gel electrophoresis (DGGE) of 16S ribosomal DNA amplicons and DNA sequence analysis. Several treatments with HCl, H(2)SO(4), and FeSO(4) were evaluated by stimulation of bioleaching of copper in the soils. Treatments and extractions using FeSO(4) and H(2)SO(4) mixture at 30°C displayed more copper leaching than extractions with deionized water at room temperature. Treatment with H(2)SO(4) supported bioleaching of as much as 120 mg kg(-1) of copper from vineyard soil after 115 days of incubation. DGGE analysis of the treatments revealed that some treatments caused greater diversity of microorganisms in the vineyard soil compared to the copper mining waste. Nucleotide Blast of PCR-amplified fragments of 16S rRNA gene bands from DGGE indicated the presence of Rhodobacter sp., Silicibacter sp., Bacillus sp., Paracoccus sp., Pediococcus sp., a Myxococcales, Clostridium sp., Thiomonas sp., a firmicute, Caulobacter vibrioides, Serratia sp., and an actinomycetales in vineyard soil. Contrarily, Sphingomonas was the predominant genus in copper mining waste in most treatments. Paracoccus sp. and Enterobacter sp. were also identified from DGGE bands of the copper mining waste. Paracoccus species is involved in the copper bioleaching by sulfur oxidation system, liberating the copper bounded in the soils and hence promoting copper bioremediation. Results indicate that stimulation of bioleaching with a combination of FeSO(4

  14. Copper catalysed synthesis of indolylquinazolinone alkaloid bouchardatine

    Indian Academy of Sciences (India)

    Mayavan Viji; Rajagopal Nagarajan

    2014-07-01

    We describe the total synthesis of indolylquinazolinone alkaloid bouchardatine and some of the quinazolinone derivatives. The aerobic oxidation induced by copper(I) bromide, followed by Vilsmeier-Haack formylation gives the natural product bouchardatine alkaloid in good yield.

  15. Diffusion of copper in porous silicon

    Energy Technology Data Exchange (ETDEWEB)

    Andsager, D.; Hetrick, J.M.; Hilliard, J.; Nayfeh, M.H. [Department of Physics, 1110 West Green Street, University of Illinois at Urbana-Champaign, Urbana, Illinois 61801 (United States)

    1995-05-01

    We present a study on the nature of diffusion of copper in {ital p}-type porous silicon. The diffusion of evaporated copper in porous silicon and deposition of metal ions in aqueous solution through the porous network was measured by monitoring the metal concentration depth profile as a function of time using Auger electron spectroscopy. We observed that increasing metal penetration from copper evaporated samples correlates with quenching of photoluminescence, in agreement with previous ion quenching results. We extracted a diffusion coefficient from Auger concentration depth profiles which was seven orders of magnitude lower than that expected for diffusion of copper in bulk crystalline Si at room temperature. Deposition of ionic species cannot be characterized as a simple diffusion process. The observed deposition rates were strongly dependent on the solution concentration.

  16. Map and table of world copper smelters

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map and table comprise information on 124 world copper smelters (2 of which are closed and 1 of which is under development) and 4 (low-grade solvent...

  17. Electrodialytic remediation of copper mine tailings

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Rojo, A.; Ottpsen, Lisbeth M.

    2005-01-01

    Mining activities in Chile have generated large amounts of solid waste, which have been deposited in mine tailing impoundments. These impoundments cause concern to the communities due to dam failures or natural leaching to groundwater and rivers.This work shows the laboratory results of nine...... electrodialytic remediation experiments on copper mine tailings. The results show that electric current could remove copper from watery tailing if the potential gradient was higher than 2V/cm during 21 days. With addition of sulphuric acid, the process was enhanced because the pH decreased to around 4......, and the copper by this reason was released in the solution. Furthermore, with acidic tailing the potential gradient was less than 2V/cm.The maximum copper removal reached in the anode side was 53% with addition of sulphuric acid in 21 days experiment at 20V using approximately 1.8kg mine tailing on dry basis...

  18. Disturbed Copper Bioavailability in Alzheimer's Disease

    Directory of Open Access Journals (Sweden)

    Daniela Kaden

    2011-01-01

    Full Text Available Recent data from in vitro, animal, and human studies have shed new light on the positive roles of copper in many aspects of AD. Copper promotes the non-amyloidogenic processing of APP and thereby lowers the Aβ production in cell culture systems, and it increases lifetime and decreases soluble amyloid production in APP transgenic mice. In a clinical trial with Alzheimer patients, the decline of Aβ levels in CSF, which is a diagnostic marker, is diminished in the verum group (8 mg copper/day, indicating a beneficial effect of the copper treatment. These observations are in line with the benefit of treatment with compounds aimed at normalizing metal levels in the brain, such as PBT2. The data reviewed here demonstrate that there is an apparent disturbance in metal homeostasis in AD. More research is urgently needed to understand how this disturbance can be addressed therapeutically.

  19. Porphyry copper deposits of the world

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Information on porphyry copper deposits from around the world with grade and tonnage models, a general classification based on geologic setting, mineralogy, with...

  20. 21 CFR 524.463 - Copper naphthenate.

    Science.gov (United States)

    2010-04-01

    ... and ponies for thrush caused by organisms susceptible to copper naphthenate. (3) Limitations. Use on horses and ponies only. Avoid contact around eyes. Do not contaminate feed. Do not use in horses...

  1. Ultralow-loss CMOS copper plasmonic waveguides

    DEFF Research Database (Denmark)

    Fedyanin, Dmitry Yu.; Yakubovsky, Dmitry I.; Kirtaev, Roman V.

    2016-01-01

    with microelectronics manufacturing technologies. This prevents plasmonic components from integration with both silicon photonics and silicon microelectronics. Here, we demonstrate ultralow-loss copper plasmonic waveguides fabricated in a simple complementary metal-oxide semiconductor (CMOS) compatible process, which...

  2. Measuring the stability of three copper alloys

    Science.gov (United States)

    Doiron, Theodore D.; Stoup, John R.; Snoots, Patricia; Chaconas, Grace

    1990-11-01

    In this paper we report measurements of the dimensional stability of samples of brass, beryllium copper, and tellurium copper taken over an 18 month time span. Of the materials, brass was the most stable, decreasing slightly in length at the rate of 1 part per million per year (ppm/y) with an uncertainty (3a) of about 1 ppm/y. Tellurium copper shrank at an average rate of 2.Li ppm/y and beryllium copper, the least stable, at the rate of 5.8 ppm/y. To measure the instrumental uncertainty 4 samples of each material were measured, and the measurement scheme was designed to detect and correct for thermal drift ,during measurements. The experiment design problems associated with these measurements and the associated uncertainties are discussed.

  3. Water requirements of the copper industry

    Science.gov (United States)

    Mussey, Orville Durey

    1961-01-01

    The copper industry in 1955 used about 330 million gallons of water per day in the mining and manufacturing of primary copper. This amount is about 0.3 percent of the total estimated withdrawals of industrial water in the United States in 1955. These facts were determined by a survey, in 1956, of the amount and chemical quality of the water used by the copper industry. A large part of this water was used in Arizona, Nevada, New Mexico, and Utah, where about five-sixths of the domestic copper is mined. Much of the remaining water use was near New York City where most of the electrolytic refineries are located, and the rest of the water was used in widely scattered places. A little more than 100,000 gallons of water per ton of copper was used in the production of copper from domestic ores. Of this amount about 70,000 gallons per ton was used in mining and concentrating the ore, and about 30,000 gallons per ton was used to reduce the concentrate to refined copper. In areas where water was scarce or expensive, the unit water use was a little more than half the average. About 60 mgd (million gallons per day) or 18 percent of the water was used consumptively, and nearly all of the consumptive use occurred in the water-short areas of the West. Of the water used in mining and manufacturing primary copper 75 percent was surface water and 25 percent was ground water, 89 percent of this water was self-supplied by the copper companies and 11 percent came from public supplies. Much of the water used in producing primary copper was of comparatively poor quality; about 46 percent was saline containing 1,000 ppm (parts per million) or more of dissolved solids and 54 percent was fresh. Water that is used for concentration of copper ores by flotation or even any water that comes in contact with the ore at any time before it reaches the flotation plant must be free of petroleum products because they interfere with the flotation process. The water used in mining and ore concentration

  4. Comparative genomic analyses of copper transporters and cuproproteomes reveal evolutionary dynamics of copper utilization and its link to oxygen.

    Directory of Open Access Journals (Sweden)

    Perry G Ridge

    Full Text Available Copper is an essential trace element in many organisms and is utilized in all domains of life. It is often used as a cofactor of redox proteins, but is also a toxic metal ion. Intracellular copper must be carefully handled to prevent the formation of reactive oxygen species which pose a threat to DNA, lipids, and proteins. In this work, we examined patterns of copper utilization in prokaryotes by analyzing the occurrence of copper transporters and copper-containing proteins. Many organisms, including those that lack copper-dependent proteins, had copper exporters, likely to protect against copper ions that inadvertently enter the cell. We found that copper use is widespread among prokaryotes, but also identified several phyla that lack cuproproteins. This is in contrast to the use of other trace elements, such as selenium, which shows more scattered and reduced usage, yet larger selenoproteomes. Copper transporters had different patterns of occurrence than cuproproteins, suggesting that the pathways of copper utilization and copper detoxification are independent of each other. We present evidence that organisms living in oxygen-rich environments utilize copper, whereas the majority of anaerobic organisms do not. In addition, among copper users, cuproproteomes of aerobic organisms were larger than those of anaerobic organisms. Prokaryotic cuproproteomes were small and dominated by a single protein, cytochrome c oxidase. The data are consistent with the idea that proteins evolved to utilize copper following the oxygenation of the Earth.

  5. Microstructure and Service Properties of Copper Alloys

    OpenAIRE

    Polok-Rubiniec M.; Konieczny J.; Labisz K.; Włodarczyk-Fligier A.

    2016-01-01

    This elaboration shows the effect of combined heat treatment and cold working on the structure and utility properties of alloyed copper. As the test material, alloyed copper CuTi4 was employed. The samples were subjected to treatment according to the following schema: 1st variant – supersaturation and ageing, 2nd variant – supersaturation, cold rolling and ageing. The paper presents the results of microstructure, hardness, and abrasion resistance. The analysis of the wipe profile geometry was...

  6. Electrodialytic Remediation of Copper Mine Tailings

    DEFF Research Database (Denmark)

    Hansen, H.K.; Rojo, A.; Ottosen, L.M.

    2012-01-01

    This work compares and evaluates sixteen electrodialytic laboratory remediation experiments on copper mine tailings. Different parameters were analysed, such as remediation time, addition of desorbing agents, and the use of pulsed electrical fields.......This work compares and evaluates sixteen electrodialytic laboratory remediation experiments on copper mine tailings. Different parameters were analysed, such as remediation time, addition of desorbing agents, and the use of pulsed electrical fields....

  7. Pharmacological Properties of Nanometals (Silver, Copper, Iron

    Directory of Open Access Journals (Sweden)

    Chekman, I.S.

    2015-01-01

    Full Text Available The article summarizes the results of studies on the pharmacological, toxicological and specific properties of nanometals (silver, iron, copper. It is established that nanoparticles of silver, copper, iron exhibit antimicrobial action. Acute toxicity of nanometals depends on their nature, administration route and animal sex. Effects on heart activity and hemodynamic status as well as erythrocyte osmotic fragility have dose-dependent nature.

  8. EXPERIMENTAL STUDY OF THERMODYNAMICS OF LOADED COPPER

    OpenAIRE

    Barannikov, V.; Nikolaeva, E; Kasatkina, S.

    2005-01-01

    This paper presents an experimental technique to investigate the dynamic behavior of copper under compression using the split Hopkinson pressure bar. We propose to measure thermophysical characteristics of copper specimens with the use of a classic adiabatic calorimeter. The measurements of heat energy, microand macrohardness and density of deformed specimens are made. The obtained results indicate that the evolution of the material structure plays a leading role in the dynamic process of pla...

  9. The Influence of Copper on Steel

    Science.gov (United States)

    1917-02-07

    quenching in oil instead of water. He con- cludes that the presence of copper need not cause apprehension, although tere may not be any advantage in its...present work of .r. Breuil, to be h- zein de- scribed, re 2 resents on; of the most extended investigations on the zffect of copper on the properties...Clevenger and Ray, which will now be described. Experimantal. MAKING INGOTS. 𔄂mall, circular, oil fired fuinace used, (using IoA pressure burner), to heat

  10. Atomistic simulations of dislocation processes in copper

    DEFF Research Database (Denmark)

    Vegge, T.; Jacobsen, K.W.

    2002-01-01

    We discuss atomistic simulations of dislocation processes in copper based on effective medium theory interatomic potentials. Results on screw dislocation structures and processes are reviewed with particular focus on point defect mobilities and processes involving cross slip. For example, the sta......We discuss atomistic simulations of dislocation processes in copper based on effective medium theory interatomic potentials. Results on screw dislocation structures and processes are reviewed with particular focus on point defect mobilities and processes involving cross slip. For example...

  11. China Resumes Processing Trade of Copper Concentrate

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>On December 31,2008,China’s Ministry of Commerce and General Administration of Cus- toms issued its year-2008 No.121 announce- ment,saying it will adjust the forbidden cate- gory of processing trade,which includes non- ferrous metal products such as copper concen- trate,nickel concentrate,cobalt concentrate, refined copper,nickel and nickel alloy.The above products will be exempt from being for- bidden to process starting from Feb.1,2009.

  12. Interactions of catechins with copper ions

    OpenAIRE

    Řihošková, Petra

    2014-01-01

    Charles University in Prague Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical botanic and ecology Candidate: Mgr. Petra Řihošková Supervisor: PharmDr. Jana Karlíčková, Ph.D. Title of Thesis: Interactions of catechins with copper ions Keywords: catechins, chelating activity, copper, bathocuproine, hematoxylin, antioxidants Flavonoids are a class of plant polyphenols with significant antioxidant activity, which positively affects human health. Flavonoids are able to chelate me...

  13. Bonding and structure of copper nitrenes.

    Science.gov (United States)

    Cundari, Thomas R; Dinescu, Adriana; Kazi, Abul B

    2008-11-03

    Copper nitrenes are of interest as intermediates in the catalytic aziridination of olefins and the amination of C-H bonds. However, despite advances in the isolation and study of late-transition-metal multiply bonded complexes, a bona fide structurally characterized example of a terminal copper nitrene has, to our knowledge, not been reported. In anticipation of such a report, terminal copper nitrenes are studied from a computational perspective. The nitrene complexes studied here are of the form (beta-diketiminate)Cu(NPh). Density functional theory (DFT), complete active space self-consistent-field (CASSCF) electronic structure techniques, and hybrid quantum mechanical/molecular mechanical (QM/MM) methods are employed to study such species. While DFT methods indicate that a triplet (S = 1) is the ground state, CASSCF calculations indicate that a singlet (S = 0) is the ground state, with only a small energy gap between the singlet and triplet. Moreover, the ground-state (open-shell) singlet copper nitrene is found to be highly multiconfigurational (i.e., biradical) and to possess a bent geometry about the nitrene nitrogen, contrasting with the linear nitrene geometry of the triplet copper nitrenes. CASSCF calculations also reveal the existence of a closed-shell singlet state with some degree of multiple bonding character for the copper-nitrene bond.

  14. Bitrex: A new levelling agent for copper

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, J.F.K., E-mail: J.F.K.Cooper@gmail.com [Department of Physics, Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Barnes, C.H.W. [Department of Physics, Cavendish Laboratory, University of Cambridge, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom)

    2011-10-30

    Highlights: > Bitrex is a new levelling agent for copper. > The addition of Bitrex increases corrosion resistance of copper films. > The nature of pure copper electrodeposits depends on the growth template size. > Bitrex increases coppers current efficiency. - Abstract: We investigate the effects of denatonium benzoate (Bitrex) on the electrodeposition of copper films from a boric acid bath using scanning electron microscopy, cyclic voltammetry, electrochemical quartz microbalance (EQCM) measurements and corrosion studies. In the absence of Bitrex, pure copper films grown by this method are optically black owing to the appearance of complex surface nanostructures. The addition of Bitrex acts as a levelling agent preventing the formation of these nanostructures even for concentrations as low as 0.02 mM producing a lustrous film with low surface roughness. Bitrex is also found to improve the corrosion resistance by up to a factor of 20 and increase the current efficiency by over a factor of two. Bitrex is hypothesised to act directly on the cathode, partially inhibiting the growth or lowering the deposition current.

  15. Material characterization of ancient Indian copper

    Indian Academy of Sciences (India)

    A Srivastava; R Balasubramaniam

    2003-10-01

    A chalcolithic (2350–1800 BC) copper chisel from Balathal has been characterized by X-ray diffraction, microstructural and electrochemical methods. The surface patina was composed of sulfates and oxysulfates in the outer layers while the inner layers were rich in copper oxides. The chisel exhibited smaller grain sizes near two of the surfaces while the structure in the interior was equiaxed. The deformed grains and inclusions near the surfaces and variation in the microhardness of the sample from different faces proved that the copper chisel was processed by cold deformation after initial casting of the square cross-section chisel. The electrochemical behaviour of chalcolithic Cu has been compared with that of a modern Cu sample by potentiodynamic polarization studies. The corrosion rate of chalcolithic Cu in aerated 3.5% NaCl solution was only marginally higher than that of modern Cu. The higher rate of corrosion has been attributed to the presence of second phase sulfide inclusions. The excellent condition of preservation of the 3800-year-old copper object, with no indications of stress corrosion cracking, suggests that pure copper or copper-based materials can be seriously considered as candidate canister materials for long-term underground storage of nuclear wastes in underground repositories.

  16. Electrochemical Synthesis and Structural Characterization of a Novel Mixed-valence Copper (I)-copper (II) Complex: {[Bis(ethylenediamine) Copper (II)] Bis[diiodocuprate (I)]}

    OpenAIRE

    Mahboobeh Dashti Ardakani; Majid M. Heravi; Saeed Dehghanpour; Lida Fotouhi

    2007-01-01

    A novel, mixed-valent copper(I)-copper(II) complex, {[bis(ethylene-diamine)copper(II)] bis[diiodocuprate(I)]} (1), has been prepared by electrochemicaldissolution of a sacrificial copper anode in a solution of ethylenediamine (en), I2 andtetraethylammoniumperchlorate (TEAP) as supporting electrolyte in acetonitrile (AcN)and characterized by single-crystal X-ray structure determination. The crystal structure ofthe complex 1 shows that it consists of a CuI2 polymer formed from I- ligands bridgi...

  17. Copper-resistant bacteria enhance plant growth and copper phytoextraction.

    Science.gov (United States)

    Yang, Renxiu; Luo, Chunling; Chen, Yahua; Wang, Guiping; Xu, Yue; Shen, Zhenguo

    2013-01-01

    In this study, we investigated the role of rhizospheric bacteria in solubilizing soil copper (Cu) and promoting plant growth. The Cu-resistant bacterium DGS6 was isolated from a natural Cu-contaminated soil and was identified as Pseudomonas sp. DGS6. This isolate solubilized Cu in Cu-contaminated soil and stimulated root elongation of maize and sunflower. Maize was more sensitive to inoculation with DGS6 than was sunflower and exhibited greater root elongation. In pot experiment, inoculation with DGS6 increased the shoot dry weight of maize by 49% and sunflower by 34%, and increased the root dry weight of maize by 85% and sunflower by 45%. Although the concentrations of Cu in inoculated and non-inoculated seedlings did not differ significantly, the total accumulation of Cu in the plants increased after inoculation. DGS6 showed a high ability to solubilize P and produce iron-chelating siderophores, as well as significantly improved the accumulation of P and Fe in both maize and sunflower shoots. In addition, DGS6 produced indole-3-acetic acid (IAA) and ACC deaminase, which suggests that it may modulate ethylene levels in plants. The bacterial strain DGS6 could be a good candidate for re-vegetation of Cu-contaminated sites. Supplemental materials are available for this article. Go to the publisher's online edition of International Journal of Phytoremediation to view the supplemental file.

  18. Synthesis of the copper chelator TGTA and evaluation of its ability to protect biomolecules from copper induced degradation during copper catalyzed azide-alkyne bioconjugation reactions.

    Science.gov (United States)

    Ekholm, F S; Pynnönen, H; Vilkman, A; Koponen, J; Helin, J; Satomaa, T

    2016-01-21

    One of the most successful bioconjugation strategies to date is the copper(I)-catalyzed cycloaddition reaction (CuAAC), however, the typically applied reaction conditions have been found to degrade sensitive biomolecules. Herein, we present a water soluble copper chelator which can be utilized to protect biomolecules from copper induced degradation.

  19. Copper Recycling in the United States in 2004

    Science.gov (United States)

    Goonan, Thomas G.

    2009-01-01

    As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of copper from production through distribution and use, with particular emphasis on the recycling of industrial scrap (new scrap1) and used products (old scrap) in the year 2004. This materials flow study includes a description of copper supply and demand for the United States to illustrate the extent of copper recycling and to identify recycling trends. Understanding how materials flow from a source through disposition can aid in improving the management of natural resource delivery systems. In 2004, the U.S. refined copper supply was 2.53 million metric tons (Mt) of refined unalloyed copper. With adjustment for refined copper exports of 127,000 metric tons (t) of copper, the net U.S. refined copper supply was 2.14 Mt of copper. With this net supply and a consumer inventory decrease of 9,000 t of refined copper, 2.42 Mt of refined copper was consumed by U.S. semifabricators (brass mills, wire rod mills, ingot makers, and foundries and others) in 2004. In addition to the 2.42 Mt of refined copper consumed in 2004, U.S. copper semifabricators consumed 853,000 t of copper contained in recycled scrap. Furthermore, 61,000 t of copper contained in scrap was consumed by noncopper alloy makers, for example, steelmakers and aluminum alloy makers. Old scrap recycling efficiency for copper was estimated to be 43 percent of theoretical old scrap supply, the recycling rate for copper was 30 percent of apparent supply, and the new-scrap-to-old-scrap ratio for U.S. copper product production was 3.2 (76:24).

  20. Copper toxicity in a New Zealand dairy herd.

    Science.gov (United States)

    Johnston, Howard; Beasley, Laura; MacPherson, Neil

    2014-01-01

    Chronic copper toxicity was diagnosed in a Jersey herd in the Waikato region of New Zealand following an investigation into the deaths of six cattle from a herd of 250 dry cows. Clinical signs and post-mortem examination results were consistent with a hepatopathy, and high concentrations of copper in liver and blood samples of clinically affected animals confirmed copper toxicity. Liver copper concentrations and serum gamma-glutamyl transferase activities were both raised in a group of healthy animals sampled at random from the affected herd, indicating an ongoing risk to the remaining cattle; these animals all had serum copper concentrations within normal limits. Serum samples and liver biopsies were also collected and assayed for copper from animals within two other dairy herds on the same farm; combined results from all three herds showed poor correlation between serum and liver copper concentrations. To reduce liver copper concentrations the affected herd was drenched with 0.5 g ammonium molybdate and 1 g sodium sulphate per cow for five days, and the herd was given no supplementary feed or mineral supplements. Liver biopsies were repeated 44 days after the initial biopsies (approximately 1 month after the end of the drenching program); these showed a significant 37.3% decrease in liver copper concentrations (P record keeping, but multiple sources of copper contributed to a long term copper over supplementation of the herd; the biggest source of copper was a mineral supplement. The farmer perceived this herd to have problems with copper deficiency prior to the diagnosis of copper toxicity, so this case demonstrates the importance of monitoring herd copper status regularly. Also the poor correlation between liver and serum copper concentrations in the three herds sampled demonstrates the importance of using liver copper concentration to assess herd copper status.

  1. Speciation and leachability of copper in mine tailings from porphyry copper mining: influence of particle size.

    Science.gov (United States)

    Hansen, Henrik K; Yianatos, Juan B; Ottosen, Lisbeth M

    2005-09-01

    Mine tailing from the El Teniente-Codelco copper mine situated in VI Region of Chile was analysed in order to evaluate the mobility and speciation of copper in the solid material. Mine tailing was sampled after the rougher flotation circuits, and the copper content was measured to 1150 mg kg (-1) dry matter. This tailing was segmented into fractions of different size intervals: 0-38, 38-45, 45-53, 53-75, 75-106, 106-150, 150-212, and >212 microm, respectively. Copper content determination, sequential chemical extraction, and desorption experiments were carried out for each size interval in order to evaluate the speciation of copper. It was found that the particles of smallest size contained 50-60% weak acid leachable copper, whereas only 32% of the copper found in largest particles could be leached in weak acid. Copper oxides and carbonates were the dominating species in the smaller particles, and the larger particles contained considerable amounts of sulphides.

  2. Sulfidation treatment of copper-containing plating sludge towards copper resource recovery.

    Science.gov (United States)

    Kuchar, D; Fukuta, T; Onyango, M S; Matsuda, H

    2006-11-02

    The present study is concerned with the sulfidation treatment of copper-containing plating sludge towards copper resource recovery by flotation of copper sulfide from treated sludge. The sulfidation treatment was carried out by contacting simulated or real copper plating sludge with Na(2)S solution for a period of 5 min to 24 h. The initial molar ratio of S(2-) to Cu(2+) (S(2-) to Me(2+) in the case of real sludge) was adjusted to 1.00, 1.25 or 1.50, while the solid to liquid ratio was set at 1:50. As a result, it was found that copper compounds were converted to various copper sulfides within the first 5 min. In the case of simulated copper sludge, CuS was identified as the main sulfidation product at the molar ratio of S(2-) to Cu(2+) of 1.00, while Cu(7)S(4) (Roxbyite) was mainly found at the molar ratios of S(2-) to Cu(2+) of 1.50 and 1.25. Based on the measurements of oxidation-reduction potential, the formation of either CuS or Cu(7)S(4) at different S(2-) to Cu(2+) molar ratios was attributed to the changes in the oxidation-reduction potential. By contrast, in the case of sulfidation treatment of real copper sludge, CuS was predominantly formed, irrespective of S(2-) to Me(2+) molar ratio.

  3. Tianyi Copper Corporation Copper Belt Project Expected to Start in June

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>The copper belt project initiated by Zhongshan Tianyi Copper Corporation is now under construction. Construction of plant is nearing completion and the installation of equipment will soon begin.According to the schedule,the project is expected to begin operation in June, and the output is expected to reach 30,000 tons by end of year.

  4. Jiangrun Copper Planning for Copper Rod Production of 240,000 tons

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>According to Jiangsu Jiangrun Copper Co Ltd, it is planning to achieve 240,000 tons of 8mm copper rod production this year due to brisk demand from the lower reaches and the gradual release of its SCR line capacity.

  5. GD Copper Puts New Copper Tube Production Lines in Handan into Operation

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Recently a foundation stone laying ceremony was held in Handan for the Jinxiang Project on Precise Copper Tube for Air-conditioners and Refrigerators. The project was invested by Golden Dragon Precise Copper Tube Group Inc. of Henan Province.

  6. Joint Exploitation of Copper Mine Resources in Liangshan by Jiangxi Copper and Sichuan

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Recently,Sichuan Institute of Metallurgical Geology & Exploration signed a strategic agreement of cooperation with Jiangxi Copper Group.The two parties will play an active roles in the joint prospecting and exploitation of mine resources in Liangshan,the copper mine

  7. Copper does not alter the intracellular distribution of ATP7B, a copper-transporting ATPase.

    Science.gov (United States)

    Harada, M; Sakisaka, S; Kawaguchi, T; Kimura, R; Taniguchi, E; Koga, H; Hanada, S; Baba, S; Furuta, K; Kumashiro, R; Sugiyama, T; Sata, M

    2000-09-01

    Wilson's disease is a genetic disorder characterized by the accumulation of copper in the body due to a defect of biliary copper excretion. However, the mechanism of biliary copper excretion has not been fully clarified. We examined the effect of copper on the intracellular localization of the Wilson disease gene product (ATP7B) and green fluorescent protein (GFP)-tagged ATP7B in a human hepatoma cell line (Huh7). The intracellular organelles were visualized by fluorescence microscopy. GFP-ATP7B colocalized with late endosome markers, but not with endoplasmic reticulum, Golgi, or lysosome markers in both the steady and copper-loaded states. ATP7B mainly localized at the perinuclear regions in both states. These results suggest that the main localization of ATP7B is in the late endosomes in both the steady and copper-loaded states. ATP7B seems to translocate copper from the cytosol to the late endosomal lumen, thus participating in biliary copper excretion via lysosomes.

  8. Copper-2 Ingestion, Plus Increased Meat Eating Leading to Increased Copper Absorption, Are Major Factors Behind the Current Epidemic of Alzheimer's Disease.

    Science.gov (United States)

    Brewer, George J

    2015-12-02

    It has become clear that copper toxicity is playing a major role in Alzheimer's disease; but why is the brain copper toxicity with cognition loss in Alzheimer's disease so much different clinically than brain copper toxicity in Wilson's disease, which results in a movement disorder? Furthermore, why is the inorganic copper of supplement pills and in drinking water so much more damaging to cognition than the organic copper in food? A recent paper, which shows that almost all food copper is copper-1, that is the copper-2 of foods reverts to the reduced copper-1 form at death or harvest, gives new insight into these questions. The body has an intestinal transport system for copper-1, Ctr1, which channels copper-1 through the liver and into safe channels. Ctr1 cannot absorb copper-2, and some copper-2 bypasses the liver, ends up in the blood quickly, and is toxic to cognition. Humans evolved to handle copper-1 safely, but not copper-2. Alzheimer's is at least in part, a copper-2 toxicity disease, while Wilson's is a general copper overload disease. In this review, we will show that the epidemiology of the Alzheimer's epidemic occurring in developed, but not undeveloped countries, fits with the epidemiology of exposure to copper-2 ingestion leached from copper plumbing and from copper supplement pill ingestion. Increased meat eating in developed countries is also a factor, because it increases copper absorption, and thus over all copper exposure.

  9. The Amyloid Precursor Protein of Alzheimer's Disease in the Reduction of Copper(II) to Copper(I)

    Science.gov (United States)

    Multhaup, Gerd; Schlicksupp, Andrea; Hesse, Lars; Beher, Dirk; Ruppert, Thomas; Masters, Colin L.; Beyreuther, Konrad

    1996-03-01

    The transition metal ion copper(II) has a critical role in chronic neurologic diseases. The amyloid precursor protein (APP) of Alzheimer's disease or a synthetic peptide representing its copper-binding site reduced bound copper(II) to copper(I). This copper ion-mediated redox reaction led to disulfide bond formation in APP, which indicated that free sulfhydryl groups of APP were involved. Neither superoxide nor hydrogen peroxide had an effect on the kinetics of copper(II) reduction. The reduction of copper(II) to copper(I) by APP involves an electron-transfer reaction and could enhance the production of hydroxyl radicals, which could then attack nearby sites. Thus, copper-mediated toxicity may contribute to neurodegeneration in Alzheimer's disease.

  10. Copper intoxication inhibits aerobic nucleotide synthesis in Streptococcus pneumoniae

    Science.gov (United States)

    Johnson, Michael D. L.; Kehl-Fie, Thomas E.; Rosch, Jason W.

    2015-01-01

    Copper is universally toxic in excess, a feature exploited by the human immune system to facilitate bacterial clearance. The mechanism of copper intoxication remains unknown for many bacterial species. Here, we demonstrate that copper toxicity in Streptococcus pneumoniae is independent from oxidative stress but, rather, is the result of copper inhibiting the aerobic dNTP biosynthetic pathway. Furthermore, we show that copper-intoxicated S. pneumoniae is rescued by manganese, which is an essential metal in the aerobic nucleotide synthesis pathway. These data provide insight into new targets to enhance copper-mediated toxicity during bacterial clearance. PMID:25730343

  11. Copper(I) electrode function of two types of copper(II) ion-selective electrodes.

    Science.gov (United States)

    Neshkova, M; Sheytanov, H

    1985-08-01

    The response of two types of solid-state copper ion-selective electrodes with homogeneous membranes of CuAgSe and Cu(2-x)Se has been investigated in copper(I) solutions, prepared electrochemically by insitu generation from a copper anode in chloride medium. The selectivity coefficient K(pot)(Cu+, Cu(2+)) both types of electrodes has been determined. It is 10(-5.7) for the copper selenide sensor, and 10(-6.2) for the copper silver selenide one. These values are very close to that calculated for an exchange reaction proceeding on the electrode surface. The similarity in K(pot)(Cu+ ,Cu(2+)) values for different chalcogenidebased sensors suggests a common potential-generating mechanism. High chloride concentration does not interfere with the electrode response towards Cu(I), but distorts the electrode response to Cu(II).

  12. The effect of primary copper slag cooling rate on the copper valorization in the flotation process

    Directory of Open Access Journals (Sweden)

    Aleksandar Mihajlović

    2015-06-01

    Full Text Available Technological procedure of slow cooling slag from primary copper production is applied in the purpose of copper recovery in the level of 98.5% to blister. This technological procedure is divided into two phases, first slow cooling of slag on the air for 24 hours, and then accelerated cooling with water for 48 hours. Within the research following methods were used: calculation of nonstationary slag cooling, verification of the calculation using computer simulation of slag cooling in the software package COMSOL Multiphysics and experimental verification of simulation results. After testing of the experimentally gained samples of slowly cooled slag it was found that this technological procedure gives the best results in promoting growth or coagulation of dispersed particles of copper sulfide and copper in the slag, thereby increasing the utilization of the flotation process with a decrease of copper losses through very fine particles.

  13. [Evaluation of the exposure to copper and other non-ferrous metals in copper foundries].

    Science.gov (United States)

    Linscheid, D

    1985-01-01

    Working environment has been evaluated in two copper metallurgy plants by analysis of Cu and other metals (Pb, Cd, Zn) concentrations. At the Charge Preparation Department the greatest concentrations of Cu and Pb were found. Copper concentrations at Metallurgy Department (shaft furnace, converter and anodic furnace) oscillate between 0.1-0.5 mg/m3, and Pb 0.06-0.71 mg/m3. In order to accurately evaluate copper exposure at working places where copper fume may arise (Metallurgy Department) it is necessary to determine Cu concentrations in respirable dust. At other working places Cu, Pb and Zn concentrations were low. Cadmium appears in vestigial amounts. The quantitative analysis indicates that airborne copper at the Charge Preparation Department and at the shaft furnace appears as CuS, at converter as Cu2O, and at other working places as metal Cu.

  14. Strain-induced orientation of copper oxide nanoislands through decomposition of pre-organized copper nitrate

    Institute of Scientific and Technical Information of China (English)

    谷俐; 陈树大; 赵惠明

    2004-01-01

    By the decomposition of copper nitrate at 400 ℃, oriented islands of copperoxide crystals were successfully fabricated on the amorphous glass surface. X-ray diffraction (XRD), atom force microscope (AFM), and Xray photoelectron spectroscopy (XPS) confirm the presence of copper oxide islands. The formation of oriented island structures is attributed to the following reasons: 1) the mismatch between the glass substrate and the copper oxide crystals during the relaxation of thermal expansion leads to the formation of islands; 2) the preorganized copper nitrate particles in the voids of colloidal crystals determine their ordered spatial distribution; 3) the strain of the glass substrate developing during calcination provides the driven energy for the orientation of copper oxide crystals along the same direction.

  15. Extracting copper from copper oxide ore by a zwitterionic reagent and dissolution kinetics

    Institute of Scientific and Technical Information of China (English)

    Jiu-shuai Deng; Shu-ming Wen; Jian-ying Deng; Dan-dan Wu

    2015-01-01

    Sulfamic acid (SA), which possesses a zwitterionic structure, was applied as a leaching reagent for the first time for extracting copper from copper oxide ore. The effects of reaction time, temperature, particle size, reagent concentration, and stirring speed on this leach-ing were studied. The dissolution kinetics of malachite was illustrated with a three-dimensional diffusion model. A novel leaching effect of SA on malachite was eventually demonstrated. The leaching rate increased with decreasing particle size and increasing concentration, reac-tion temperature and stirring speed. The activation energy for SA leaching malachite was 33.23 kJ/mol. Furthermore, the effectiveness of SA as a new reagent for extracting copper from copper oxide ore was confirmed by experiment. This approach may provide a solution suitable for subsequent electrowinning. In addition, results reported herein may provide basic data that enable the leaching of other carbonate miner-als of copper, zinc, cobalt and so on in an SA system.

  16. Magnetic field effects on copper metal deposition from copper sulfate aqueous solution.

    Science.gov (United States)

    Udagawa, Chikako; Maeda, Aya; Katsuki, Akio; Maki, Syou; Morimoto, Shotaro; Tanimoto, Yoshifumi

    2014-05-01

    Effects of a magnetic field (≤0.5 T) on electroless copper metal deposition from the reaction of a copper sulfate aqueous solution and a zinc thin plate were examined in this study. In a zero field, a smooth copper thin film grew steadily on the plate. In a 0.38 T field, a smooth copper thin film deposited on a zinc plate within about 1 min. Then, it peeled off repeatedly from the plate. The yield of consumed copper ions increased about 2.1 times compared with that in a zero field. Mechanism of this magnetic field effect was discussed in terms of Lorentz force- and magnetic force-induced convection and local volta cell formation.

  17. Vitrification of copper flotation waste.

    Science.gov (United States)

    Karamanov, Alexander; Aloisi, Mirko; Pelino, Mario

    2007-02-09

    The vitrification of an hazardous iron-rich waste (W), arising from slag flotation of copper production, was studied. Two glasses, containing 30wt% W were melted for 30min at 1400 degrees C. The first batch, labeled WSZ, was obtained by mixing W, blast furnace slag (S) and zeolite tuff (Z), whereas the second, labeled WG, was prepared by mixing W, glass cullet (G), sand and limestone. The glass frits showed high chemical durability, measured by the TCLP test. The crystallization of the glasses was evaluated by DTA. The crystal phases formed were identified by XRD resulting to be pyroxene and wollastonite solid solutions, magnetite and hematite. The morphology of the glass-ceramics was observed by optical and scanning electron microscopy. WSZ composition showed a high rate of bulk crystallization and resulted to be suitable for producing glass-ceramics by a short crystallization heat-treatment. WG composition showed a low crystallization rate and good sinterability; glass-ceramics were obtained by sinter-crystallization of the glass frit.

  18. The Copper Balance of Cities

    Science.gov (United States)

    Kral, Ulrich; Lin, Chih-Yi; Kellner, Katharina; Ma, Hwong-wen; Brunner, Paul H

    2014-01-01

    Material management faces a dual challenge: on the one hand satisfying large and increasing demands for goods and on the other hand accommodating wastes and emissions in sinks. Hence, the characterization of material flows and stocks is relevant for both improving resource efficiency and environmental protection. This article focuses on the urban scale, a dimension rarely investigated in past metal flow studies. We compare the copper (Cu) metabolism of two cities in different economic states, namely, Vienna (Europe) and Taipei (Asia). Substance flow analysis is used to calculate urban Cu balances in a comprehensive and transparent form. The main difference between Cu in the two cities appears to be the stock: Vienna seems close to saturation with 180 kilograms per capita (kg/cap) and a growth rate of 2% per year. In contrast, the Taipei stock of 30 kg/cap grows rapidly by 26% per year. Even though most Cu is recycled in both cities, bottom ash from municipal solid waste incineration represents an unused Cu potential accounting for 1% to 5% of annual demand. Nonpoint emissions are predominant; up to 50% of the loadings into the sewer system are from nonpoint sources. The results of this research are instrumental for the design of the Cu metabolism in each city. The outcomes serve as a base for identification and recovery of recyclables as well as for directing nonrecyclables to appropriate sinks, avoiding sensitive environmental pathways. The methodology applied is well suited for city benchmarking if sufficient data are available. PMID:25866460

  19. Grain Boundary Energies in Copper.

    Science.gov (United States)

    Omar, Ramli

    Available from UMI in association with The British Library. Requires signed TDF. The dependence of grain boundary energy on boundary orientation was studied in copper annealed at 1000 ^circC. Grain boundary orientations and the disorientations across the boundaries were measured. A rotation matrix notation is used to interpret selected area electron channelling patterns observed in a scanning electron microscope. The Herring and Shewmon torque terms were investigated using wire specimens having a "bamboo" structure. The Herring torque terms were determined using the Hess relation. The (110) section of the Sigma 11 gamma-plot (i.e. the variation of grain boundary energy with boundary orientation) was evaluated. In this plot, minima in energies were found at the (311) and (332) mirror planes. Sigma 3 and Sigma9 boundaries were investigated in sheet specimens. The (110) and (111) sections of the Sigma3 gamma -plot were evaluated. In addition to the sharp cusps occurring at the Sigma3 {111} planes, the further shallower cusps occur at the incoherent Sigma 3 boundaries with the interfacial planes approximately parallel to {322} in one crystal and {11.44} in the other crystal. Flat and curved Sigma9 boundaries were investigated. The break up of Sigma9 boundaries into two Sigma3 boundaries and the relation between the Sigma3 and Sigma 9 gamma-plots was also examined. The (110) section of the Sigma9 gamma-plot was constructed.

  20. Copper complexes as therapeutic agents.

    Science.gov (United States)

    Duncan, Clare; White, Anthony R

    2012-02-01

    The importance of transition metals in biological processes has been well established. Copper (Cu) is a transition metal that can exist in oxidised and reduced states. This allows it to participate in redox and catalytic chemistry, making it a suitable cofactor for a diverse range of enzymes and molecules. Cu deficiency or toxicity is implicated in a variety of pathological conditions; therefore inorganic complexes of Cu have been investigated for their therapeutic and diagnostic potential. These Cu complexes have been shown to be effective in cancer treatment due to their cytotoxic action on tumour cells. Alternatively, Cu complexes can also modulate Cu homeostasis in the brain, resulting in protective effects in several models of neurodegeneration. In other diseases such as coronary heart disease and skin disease, the success of Cu complexes as potential therapeutics will most likely be due to their ability to increase SOD activity, leading to relief of oxidative stress. This review seeks to provide a broad insight into some of the diverse actions of Cu complexes and demonstrate the strong future for these compounds as potential therapeutic agents.

  1. Elusive Terminal Copper Arylnitrene Intermediates.

    Science.gov (United States)

    Bakhoda, Abolghasem Gus; Jiang, Quan; Bertke, Jeffery A; Cundari, Thomas R; Warren, Timothy H

    2017-06-01

    We report herein three new modes of reactivity between arylazides N3 Ar with a bulky copper(I) β-diketiminate. Addition of N3 Ar(X3) (Ar(X3) =2,4,6-X3 C6 H2 ; X=Cl or Me) to [(i) Pr2 NN]Cu(NCMe) results in triazenido complexes from azide attack on the β-diketiminato backbone. Reaction of [(i) Pr2 NN]Cu(NCMe) with bulkier azides N3 Ar leads to terminal nitrenes [(i) Pr2 NN]Cu]=NAr that dimerize via formation of a C-C bond at the arylnitrene p-position to give the dicopper(II) diketimide 4 (Ar=2,6-(i) Pr2 C6 H3 ) or undergo nitrile insertion to give diazametallocyclobutene 8 (Ar=4-Ph-2,6-iPr2 C6 H2 ). Importantly, reactivity studies reveal both 4 and 8 to be "masked" forms of the terminal nitrenes [(i) Pr2 NN]Cu=NAr that undergo nitrene group transfer to PMe3 , (t) BuNC, and even into a benzylic sp(3) C-H bond of ethylbenzene. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Development of highly faceted reduced graphene oxide-coated copper oxide and copper nanoparticles on a copper foil surface

    Directory of Open Access Journals (Sweden)

    Rebeca Ortega-Amaya

    2016-07-01

    Full Text Available This work describes the formation of reduced graphene oxide-coated copper oxide and copper nanoparticles (rGO-Cu2ONPs, rGO-CuNPs on the surface of a copper foil supporting graphene oxide (GO at annealing temperatures of 200–1000 °C, under an Ar atmosphere. These hybrid nanostructures were developed from bare copper oxide nanoparticles which grew at an annealing temperature of 80 °C under nitrogen flux. The predominant phase as well as the particle size and shape strongly depend on the process temperature. Characterization with transmission electron microscopy and scanning electron microscopy indicates that Cu or Cu2O nanoparticles take rGO sheets from the rGO network to form core–shell Cu–rGO or Cu2O–rGO nanostructures. It is noted that such ones increase in size from 5 to 800 nm as the annealing temperature increases in the 200–1000 °C range. At 1000 °C, Cu nanoparticles develop a highly faceted morphology, displaying arm-like carbon nanorods that originate from different facets of the copper crystal structure.

  3. Development of highly faceted reduced graphene oxide-coated copper oxide and copper nanoparticles on a copper foil surface

    Science.gov (United States)

    Matsumoto, Yasuhiro; Espinoza-Rivas, Andrés M; Pérez-Guzmán, Manuel A; Ortega-López, Mauricio

    2016-01-01

    Summary This work describes the formation of reduced graphene oxide-coated copper oxide and copper nanoparticles (rGO-Cu2ONPs, rGO-CuNPs) on the surface of a copper foil supporting graphene oxide (GO) at annealing temperatures of 200–1000 °C, under an Ar atmosphere. These hybrid nanostructures were developed from bare copper oxide nanoparticles which grew at an annealing temperature of 80 °C under nitrogen flux. The predominant phase as well as the particle size and shape strongly depend on the process temperature. Characterization with transmission electron microscopy and scanning electron microscopy indicates that Cu or Cu2O nanoparticles take rGO sheets from the rGO network to form core–shell Cu–rGO or Cu2O–rGO nanostructures. It is noted that such ones increase in size from 5 to 800 nm as the annealing temperature increases in the 200–1000 °C range. At 1000 °C, Cu nanoparticles develop a highly faceted morphology, displaying arm-like carbon nanorods that originate from different facets of the copper crystal structure. PMID:27547618

  4. Grain boundary corrosion of copper canister material

    Energy Technology Data Exchange (ETDEWEB)

    Fennell, P.A.H.; Graham, A.J.; Smart, N.R.; Sofield, C.J. [AEA Technology plc, Harwell (United Kingdom)

    2001-03-01

    The proposed design for a final repository for spent fuel and other long-lived residues in Sweden is based on the multi-barrier principle. The waste will be encapsulated in sealed cylindrical canisters, which will then be placed in granite bedrock and surrounded by compacted bentonite clay. The canister design is based on a thick cast inner container fitted inside a corrosion-resistant copper canister. During fabrication of the outer copper canisters there will be some unavoidable grain growth in the welded areas. As grains grow they will tend to concentrate impurities within the copper at the new grain boundaries. The work described in this report was undertaken to determine whether there is any possibility of enhanced corrosion at grain boundaries within the copper canister. The potential for grain boundary corrosion was investigated by exposing copper specimens, which had undergone different heat treatments and hence had different grain sizes, to aerated artificial bentonite-equilibrated groundwater with two concentrations of chloride, for increasing periods of time. The degree of grain boundary corrosion was determined by atomic force microscopy (AFM) and optical microscopy. AFM showed no increase in grain boundary 'ditching' for low chloride groundwater. In high chloride groundwater the surface was covered uniformly with a fine-grained oxide. No increases in oxide thickness were observed. No significant grain boundary attack was observed using optical microscopy either. The work suggests that in aerated artificial groundwaters containing chloride ions, grain boundary corrosion of copper is unlikely to adversely affect SKB's copper canisters.

  5. Copper homeostasis in grapevine: functional characterization of the Vitis vinifera copper transporter 1.

    Science.gov (United States)

    Martins, Viviana; Bassil, Elias; Hanana, Mohsen; Blumwald, Eduardo; Gerós, Hernâni

    2014-07-01

    The Vitis vinifera copper transporter 1 is capable of self-interaction and mediates intracellular copper transport. An understanding of copper homeostasis in grapevine (Vitis vinifera L.) is particularly relevant to viticulture in which copper-based fungicides are intensively used. In the present study, the Vitis vinifera copper transporter 1 (VvCTr1), belonging to the Ctr family of copper transporters, was cloned and functionally characterized. Amino acid sequence analysis showed that VvCTr1 monomers are small peptides composed of 148 amino acids with 3 transmembrane domains and several amino acid residues typical of Ctr transporters. Bimolecular fluorescence complementation (BiFC) demonstrated that Ctr monomers are self-interacting and subcellular localization studies revealed that VvCTr1 is mobilized via the trans-Golgi network, through the pre-vacuolar compartment and located to the vacuolar membrane. The heterologous expression of VvCTr1 in a yeast strain lacking all Ctr transporters fully rescued the phenotype, while a deficient complementation was observed in a strain lacking only plasma membrane-bound Ctrs. Given the common subcellular localization of VvCTr1 and AtCOPT5 and the highest amino acid sequence similarity in comparison to the remaining AtCOPT proteins, Arabidopsis copt5 plants were stably transformed with VvCTr1. The impairment in root growth observed in copt5 seedlings in copper-deficient conditions was fully rescued by VvCTr1, further supporting its involvement in intracellular copper transport. Expression studies in V. vinifera showed that VvCTr1 is mostly expressed in the root system, but transcripts were also present in leaves and stems. The functional characterization of VvCTr-mediated copper transport provides the first step towards understanding the physiological and molecular responses of grapevines to copper-based fungicides.

  6. Copper transporter 2 regulates intracellular copper and sensitivity to cisplatin.

    Science.gov (United States)

    Huang, Carlos P; Fofana, Mariama; Chan, Jefferson; Chang, Christopher J; Howell, Stephen B

    2014-03-01

    Mammalian cells express two copper (Cu) influx transporters, CTR1 and CTR2. CTR1 serves as an influx transporter for both Cu and cisplatin (cDDP). In mouse embryo fibroblasts, reduction of CTR1 expression renders cells resistant to cDDP whereas reduction of CTR2 makes them hypersensitive both in vitro and in vivo. To investigate the role of CTR2 on intracellular Cu and cDDP sensitivity its expression was molecularly altered in the human epithelial 2008 cancer cell model. Intracellular exchangeable Cu(+) was measured with the fluorescent probe Coppersensor-3 (CS3). The ability of CS3 to report on changes in intracellular Cu(+) was validated by showing that Cu chelators reduced its signal, and that changes in signal accompanied alterations in expression of the major Cu influx transporter CTR1 and the two Cu efflux transporters, ATP7A and ATP7B. Constitutive knock down of CTR2 mRNA by ∼50% reduced steady-state exchangeable Cu by 22-23% and increased the sensitivity of 2008 cells by a factor of 2.6-2.9 in two separate clones. Over-expression of CTR2 increased exchangeable Cu(+) by 150% and rendered the 2008 cells 2.5-fold resistant to cDDP. The results provide evidence that CS3 can quantitatively assess changes in exchangeable Cu(+), and that CTR2 regulates both the level of exchangeable Cu(+) and sensitivity to cDDP in a model of human epithelial cancer. This study introduces CS3 and related sensors as novel tools for probing and assaying Cu-dependent sensitivity to anticancer therapeutics.

  7. Evolution of copper transporting ATPases in eukaryotic organisms.

    Science.gov (United States)

    Gupta, Arnab; Lutsenko, Svetlana

    2012-04-01

    Copper is an essential nutrient for most life forms, however in excess it can be harmful. The ATP-driven copper pumps (Copper-ATPases) play critical role in living organisms by maintaining appropriate copper levels in cells and tissues. These evolutionary conserved polytopic membrane proteins are present in all phyla from simplest life forms (bacteria) to highly evolved eukaryotes (Homo sapiens). The presumed early function in metal detoxification remains the main function of Copper-ATPases in prokaryotic kingdom. In eukaryotes, in addition to removing excess copper from the cell, Copper-ATPases have another equally important function - to supply copper to copper dependent enzymes within the secretory pathway. This review focuses on the origin and diversification of Copper ATPases in eukaryotic organisms. From a single Copper ATPase in protozoans, a divergence into two functionally distinct ATPases is observed with the evolutionary appearance of chordates. Among the key functional domains of Copper-ATPases, the metal-binding N-terminal domain could be responsible for functional diversification of the copper ATPases during the course of evolution.

  8. Abnormal Copper Homeostasis: Mechanisms and Roles in Neurodegeneration

    Directory of Open Access Journals (Sweden)

    Mario Manto

    2014-06-01

    Full Text Available As a cofactor of proteins and enzymes involved in critical molecular pathways in mammals and low eukaryotes, copper is a transition metal essential for life. The intra-cellular and extra-cellular metabolism of copper is under tight control, in order to maintain free copper concentrations at very low levels. Copper is a critical element for major neuronal functions, and the central nervous system is a major target of disorders of copper metabolism. Both the accumulation of copper and copper deficiency are associated with brain dysfunction. The redox capacities of free copper, its ability to trigger the production of reactive oxygen species and the close relationships with the regulation of iron and zinc are remarkable features. Major advances in our understanding of the relationships between copper, neuronal functions and neurodegeneration have occurred these last two decades. The metabolism of copper and the current knowledge on the consequences of copper dysregulation on brain disorders are reviewed, with a focus on neurodegenerative diseases, such as Wilson’s disease, Alzheimer’s disease and Parkinson’s disease. In vitro studies, in vivo experiments and evidence from clinical observations of the neurotoxic effects of copper provide the basis for future therapies targeting copper homeostasis.

  9. Copper at synapse: Release, binding and modulation of neurotransmission.

    Science.gov (United States)

    D'Ambrosi, Nadia; Rossi, Luisa

    2015-11-01

    Over the last decade, a piece of the research studying copper role in biological systems was devoted to unravelling a still elusive, but extremely intriguing, aspect that is the involvement of copper in synaptic function. These studies were prompted to provide a rationale to the finding that copper is released in the synaptic cleft upon depolarization. The copper pump ATP7A, which mutations are responsible for diseases with a prominent neurodegenerative component, seems to play a pivotal role in the release of copper at synapses. Furthermore, it was found that, when in the synaptic cleft, copper can control, directly or indirectly, the activity of the neurotransmitter receptors (NMDA, AMPA, GABA, P2X receptors), thus affecting excitability. In turn, neurotransmission can affect copper trafficking and delivery in neuronal cells. Furthermore, it was reported that copper can also modulate synaptic vesicles trafficking and the interaction between proteins of the secretory pathways. Interestingly, proteins with a still unclear role in neuronal system though associated with the pathogenesis of neurodegenerative diseases (the amyloid precursor protein, APP, the prion protein, PrP, α-synuclein, α-syn) show copper-binding domains. They may act as copper buffer at synapses and participate in the interplay between copper and the neurotransmitters receptors. Given that copper dysmetabolism occurs in several diseases affecting central and peripheral nervous system, the findings on the contribution of copper in synaptic transmission, beside its more consolidate role as a neuronal enzymes cofactor, may open new insights for therapy interventions.

  10. United States copper metal and scrap use and trade patterns, 1995‒2014

    Science.gov (United States)

    Goonan, Thomas G.

    2016-06-17

    In 1995, China accounted for 10 percent of world copper consumption. By 2014, China accounted for about 49 percent of world copper consumption. This change has affected global copper and copper scrap prices, the sources of copper supply, and U.S. trade of copper-containing materials.

  11. 40 CFR 468.10 - Applicability; description of the copper forming subcategory.

    Science.gov (United States)

    2010-07-01

    ... treatment works from the forming of copper and copper alloys except beryllium copper alloys. ... copper forming subcategory. 468.10 Section 468.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS COPPER FORMING POINT SOURCE CATEGORY Copper...

  12. Optical properties of stabilized copper nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Mohindroo, Jeevan Jyoti, E-mail: jjmdav@gmail.com [Punjab Technical University, Kapurthala Punjab (India); Department of Chemistry, DAV College, Amritsar, Punjab India (India); Garg, Umesh Kumar, E-mail: Umeshkgarg@gmail.com [Punjab Technical University, Kapurthala Punjab (India); Guru Teg Bahadur Khalsa College of IT, Malout, Punjab (India); Sharma, Anshul Kumar [Department of Physics, Guru Nanak Dev University, Amritsar 143005 (India)

    2016-05-06

    Optical studies involving calculation of Band Gap of the synthesized copper nanoparticles were carried out in the wavelength range of 500 to 650 nm at room temperature, the particles showed high absorption at 550 nm indicating their good absorptive properties. In this method water is used as the medium for reduction of copper ions in to copper Nanoparticles the stabilization of copper Nanoparticles was studied with starch both as a reductant and stabilizer,. The reaction mixture was heated using a kitchen microwave for about 5 minutes to attain the required temp for the reaction. The pH of the solution was adjusted to alkaline using 5% solution of NaOH. Formation of Copper Nanoparticles was indicated by change in color of the solution from blue to yellowish black which is supported by the UV absorption at 570 nm.the synthesized particles were washed with water and alcohol. The optical properties depend upon absorption of radiations which in turn depends upon ratio of electrons and holes present in the material and also on the shape of the nanoparticles. In the present investigation it was observed that optical absorption increases with increase in particle size. The optical band gap for the Nanoparticles was obtained from plots between hv vs. (αhv){sup 2} and hv vs. (αhv){sup 1/2}. The value of Band gap came out to be around 1.98–2.02 eV which is in close agreement with the earlier reported values.

  13. Electrodialytic remediation of copper mine tailings.

    Science.gov (United States)

    Hansen, Henrik K; Rojo, Adrián; Ottosen, Lisbeth M

    2005-01-31

    Mining activities in Chile have generated large amounts of solid waste, which have been deposited in mine tailing impoundments. These impoundments cause concern to the communities due to dam failures or natural leaching to groundwater and rivers. This work shows the laboratory results of nine electrodialytic remediation experiments on copper mine tailings. The results show that electric current could remove copper from watery tailing if the potential gradient was higher than 2 V/cm during 21 days. With addition of sulphuric acid, the process was enhanced because the pH decreased to around 4, and the copper by this reason was released in the solution. Furthermore, with acidic tailing the potential gradient was less than 2 V/cm. The maximum copper removal reached in the anode side was 53% with addition of sulphuric acid in 21 days experiment at 20 V using approximately 1.8 kg mine tailing on dry basis. In addition, experiments with acidic tailing show that the copper removal is proportional with time.

  14. Copper in the sea: a bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R.L.

    1977-04-01

    Life in the sea is vulnerable to the influx of trace metals resulting from man's activities. Although many pollutants introduced to the sea eventually degrade to less harmful forms, trace metals accumulate in sediments and have a continued potential for effect on biota. Copper has a toxic potential exceeding all other metals due to the quantity discharged and its toxicological effect. Fortunately, copper in the oceans is rendered less bioavailable or less toxic by its ready interaction with the complex chemical components of seawater. This bibliography was prepared to illustrate the status of current knowledge of the biogeochemistry of copper and to aid the development of research programs to define the effects of copper discharged to the marine environment. The references are categorized to aid the reader to locate literature concerning specific aspects of the biogeochemistry of copper. A brief comment describing the important findings in each category is given. Although this bibliography is not exhaustive, the listed references are likely representative of current knowledge.

  15. Characterization of copper-resistant rhizosphere bacteria from Avena sativa and Plantago lanceolata for copper bioreduction and biosorption.

    Science.gov (United States)

    Andreazza, Robson; Okeke, Benedict C; Pieniz, Simone; Camargo, Flávio A O

    2012-04-01

    Copper is a toxic heavy metal widely used to microbial control especially in agriculture. Consequently, high concentrations of copper residues remain in soils selecting copper-resistant organisms. In vineyards, copper is routinely used for fungi control. This work was undertaken to study copper resistance by rhizosphere microorganisms from two plants (Avena sativa L. and Plantago lanceolata L.) common in vineyard soils. Eleven rhizosphere microorganisms were isolated, and four displayed high resistance to copper. The isolates were identified by 16S rRNA gene sequence analysis as Pseudomonas putida (A1), Stenotrophomonas maltophilia (A2) and Acinetobacter sp. (A6), isolated from Avena sativa rhizosphere, and Acinetobacter sp. (T5), isolated from Plantago lanceolata rhizosphere. The isolates displayed high copper resistance in the temperature range from 25°C to 35°C and pH in the range from 5.0 to 9.0. Pseudomonas putida A1 resisted as much as 1,000 mg L(-1) of copper. The isolates showed similar behavior on copper removal from liquid medium, with a bioremoval rate of 30% at 500 mg L(-1) after 24 h of growth. Speciation of copper revealed high copper biotransformation, reducing Cu(II) to Cu(I), capacity. Results indicate that our isolates are potential agents for copper bioremoval and bacterial stimulation of copper biosorption by Avena sativa and Plantago lanceolata.

  16. New canine models of copper toxicosis: diagnosis, treatment, and genetics.

    Science.gov (United States)

    Fieten, Hille; Penning, Louis C; Leegwater, Peter A J; Rothuizen, Jan

    2014-05-01

    The One Health principle recognizes that human health, animal health, and environmental health are inextricably linked. An excellent example is the study of naturally occurring copper toxicosis in dogs to help understand human disorders of copper metabolism. Besides the Bedlington terrier, where copper toxicosis is caused by a mutation in the COMMD1 gene, more complex hereditary forms of copper-associated hepatitis were recognized recently in other dog breeds. The Labrador retriever is one such breed, where an interplay between genetic susceptibility and exposure to copper lead to clinical copper toxicosis. Purebred dog populations are ideal for gene mapping studies, and because genes involved in copper metabolism are highly conserved across species, newly identified gene mutations in the dog may help unravel the genetic complexity of different human forms of copper toxicosis. Furthermore, increasing knowledge with respect to diagnosis and treatment strategies will benefit both species.

  17. ENVIRONMENTAL ISSUE IN COPPER ORE FLOTATION BY XANTHATES

    National Research Council Canada - National Science Library

    Zoran Markovic

    2015-01-01

      This paper presents some investigation results about potassium ethyl xanthate (PEX) stability in water solution at higher pH and in presence of mineral chalcopyrite, related to flotation of copper minerals from copper ore...

  18. Metals in Metal Salts: A Copper Mirror Demonstration

    Science.gov (United States)

    Pike, Robert D.

    2010-01-01

    A simple lecture demonstration is described to show the latent presence of metal atoms in a metal salt. Copper(II) formate tetrahydrate is heated in a round-bottom flask forming a high-quality copper mirror.

  19. Structure evolution on annealing of copper-doped carbon film

    Energy Technology Data Exchange (ETDEWEB)

    Onoprienko, A.A. [Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 3 Krzhyzhanovsky St., 03142 Kiev (Ukraine)]. E-mail: onopr@ipms.kiev.ua; Danilenko, N.I. [Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 3 Krzhyzhanovsky St., 03142 Kiev (Ukraine); Kossko, I.A. [Frantsevich Institute for Problems of Materials Science, National Academy of Sciences of Ukraine, 3 Krzhyzhanovsky St., 03142 Kiev (Ukraine)

    2007-06-13

    Thin copper-doped (8 at.% Cu) carbon film was deposited by direct current magnetron sputtering of composite graphite/copper target in argon plasma. The evolution of film structure on annealing at 600 deg. C in a vacuum has been studied by transmission electron microscopy and electron diffraction. The as-deposited film was amorphous with copper atoms uniformly distributed over the film volume. Annealing resulted in precipitation of copper particles within carbon film followed by the decrease in the density of copper particles and increase in particle average size with annealing time due to diffusion coalescence within the ensemble of copper particles. The coalescence occurred by the mixed mechanism of bulk and surface diffusion of copper atoms within carbon film that contained a large number of structural defects. As a result, the mean radius of copper particles in ensemble changed as R-bar {sup 5} {approx} t.

  20. Trace elements in human physiology and pathology. Copper.

    Science.gov (United States)

    Tapiero, H; Townsend, D M; Tew, K D

    2003-11-01

    Copper is a trace element, important for the function of many cellular enzymes. Copper ions can adopt distinct redox states oxidized Cu(II) or reduced (I), allowing the metal to play a pivotal role in cell physiology as a catalytic cofactor in the redox chemistry of enzymes, mitochondrial respiration, iron absorption, free radical scavenging and elastin cross-linking. If present in excess, free copper ions can cause damage to cellular components and a delicate balance between the uptake and efflux of copper ions determines the amount of cellular copper. In biological systems, copper homeostasis has been characterized at the molecular level. It is coordinated by several proteins such as glutathione, metallothionein, Cu-transporting P-type ATPases, Menkes and Wilson proteins and by cytoplasmic transport proteins called copper chaperones to ensure that it is delivered to specific subcellular compartments and thereby to copper-requiring proteins.

  1. Bulk Copper Electrodeposition on Gold Imaged by In Situ STM

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov; Bech-Nielsen, Gregers; Møller, Per

    1996-01-01

    Electrochemical measurements were carried out simultaneously with acquisition of in situ STM images of copper electrodeposition at low cathodic overpotentials and subsequent dissolution from the underlying polycrystalline gold surfaces. The morphologies of the copper deposits were examined...... for correlation with features of the current-voltage diagram. Copper growth is by nucleation and formation of 3D islands. During the initial stages of bulk copper growth the potentials were fixed at selected values and a balance observed between formation of polycrystalline copper nuclei and of copper crystals....... After the first cycle of copper deposition and dissolution the morphology of the polycrystalline gold surface had apparently changed into a recrystallized phase of a copper-gold alloy. At a given stage of the cycle the potential of the electrode was found to depend linearly on the tip potential...

  2. A limited legacy effect of copper in marine biofilms.

    Science.gov (United States)

    McElroy, David J; Doblin, Martina A; Murphy, Richard J; Hochuli, Dieter F; Coleman, Ross A

    2016-08-15

    The effects of confounding by temporal factors remains understudied in pollution ecology. For example, there is little understanding of how disturbance history affects the development of assemblages. To begin addressing this gap in knowledge, marine biofilms were subjected to temporally-variable regimes of copper exposure and depuration. It was expected that the physical and biological structure of the biofilms would vary in response to copper regime. Biofilms were examined by inductively coupled plasma optical emission spectrometry, chlorophyll-a fluorescence and field spectrometry and it was found that (1) concentrations of copper were higher in those biofilms exposed to copper, (2) concentrations of copper remain high in biofilms after the source of copper is removed, and (3) exposure to and depuration from copper might have comparable effects on the photosynthetic microbial assemblages in biofilms. The persistence of copper in biofilms after depuration reinforces the need for consideration of temporal factors in ecology.

  3. Copper nanoparticle formation in a reducing gas environment

    NARCIS (Netherlands)

    ten Brink, Gert H.; Krishnan, Gopi; Kooi, Bart J.; Palasantzas, George

    2014-01-01

    Although copper nanoparticles are used as model nanomaterial because of their small nucleation barrier, their oxidization sensitivity hampers production of fully metallic nanoparticles with controlled size and shape. Nevertheless, we demonstrate here synthesis of copper nanoparticles, via high press

  4. Characterization of copper resistant ciliates: Potential candidates for ...

    African Journals Online (AJOL)

    ... of copper resistant ciliates: Potential candidates for consortia of organisms used in bioremediation of wastewater. ... African Journal of Biotechnology ... Copper is one of such contaminant found in the wastewater of local industries.

  5. High-strength braze joints between copper and steel

    Science.gov (United States)

    Kuhn, R. F.

    1967-01-01

    High-strength braze joints between copper and steel are produced by plating the faying surface of the copper with a layer of gold. This reduces porosity in the braze area and strengthens the resultant joint.

  6. Modeling and control of copper loss in smelting slag

    Science.gov (United States)

    Tan, Pengfu

    2011-12-01

    A series of technical improvements have been implemented to address the issue of high copper losses in rotary holding furnace (RHF) slag, which were experienced at the Xstrata Copper Smelter at Mount Isa in 2007 and 2008. The copper losses in smelting slag in the RHF were more than 3% in 2006 and 2007. Thermodynamic models and viscosity models have been applied in the operation of Xstrata Copper Smelter in Australia. The theory of RHF key performance indicators has also been developed to reduce the copper losses in RHF slag. The RHF KPIs Theory has been applied in Mount Isa Copper Smelter. The copper losses in RHF slag dropped from 3.1% in 2007 to 0.76% in April 2009. The average copper loss in RHF slag in 2009 and 2010 was about 0.9%.

  7. Practical Poultry Raising. Appropriate Technologies for Development. Manual M-11.

    Science.gov (United States)

    French, Kenneth M.

    This manual is designed to provide development workers with the information and tools needed to begin or to improve poultry production. Covered in the individual chapters are the following topics: the nature and scope of poultry production, assessment of local poultry selections, basic information about chickens, country chickens, poultry…

  8. Coordination geometry around copper in a Schiff-base trinuclear copper complex using EXAFS spectroscopy

    Science.gov (United States)

    Gaur, Abhijeet; Shrivastava, B. D.; Gaur, D. C.; Prasad, J.; Srivastava, K.; Jha, S. N.; Bhattacharyya, D.; Poswal, A.

    2012-05-01

    In the present investigation, we have studied extended X-ray absorption fine structure (EXAFS) spectra of a trinuclear Schiff-base copper complex tetraaqua-di-μ3-(N-salicylidene-DL-glutamato)-tricopper(II)heptahydrate, [Cu3(C12H10NO5)2 (H2O)4]. 7H2O, in which three metal sites are present. One metal site is square-pyramidal (4+1) and other two similar metal sites are tetragonally distorted octahedral (4+2). EXAFS has been recorded at the K-edge of copper in the complex at the dispersive EXAFS beamline at 2 GeV Indus-2 synchrotron source at RRCAT, Indore, India. The analysis of EXAFS spectra of multinuclear metal complexes pose some problems due to the presence of many absorbing atoms, even when the absorbing atoms may be of the same element. Hence, using the available crystal structure of the complex, theoretical models have been generated for the different copper sites separately, which are then fitted to the experimental EXAFS data. The two coordination geometries around the copper sites have been determined. The contributions of the different copper sites to the experimental spectrum have been estimated. The structural parameters, which include bond-lengths, coordination numbers and thermal disorders, for the two types of copper sites have been reported. Further, copper has been found to be in +2 oxidation state at these metal sites.

  9. Mechanism of Mineral Phase Reconstruction for Improving the Beneficiation of Copper and Iron from Copper Slag

    Science.gov (United States)

    Guo, Zhengqi; Zhu, Deqing; Pan, Jan; Zhang, Feng

    2016-09-01

    To maximize the recovery of iron and copper from copper slag, the modification process by adding a compound additive (a mixture of hematite, pyrite and manganous oxide) and optimizing the cooling of the slag was studied. The phase reconstruction mechanism of the slag modification process was revealed by thermodynamic calculations, x-ray diffraction, optical microscopy and scanning electron microscopy. The results show that the synergy between the burnt lime and the compound additive promotes the generation of target minerals, such as magnetite and copper matte. In addition, the multifunctional compound additive is able to improve the fluidity of the molten slag, which facilitates the coalescence and growth of fine particles of the target minerals. As a result, the percentage of iron distributed in the form of magnetite increased from 32.9% to 65.1%, and that of the copper exiting in the form of metallic copper and copper sulfide simultaneously increased from 80.0% to 90.3%. Meanwhile, the grains of the target minerals in the modified slag grew markedly to a mean size of over 50 μm after slow cooling. Ultimately, the beneficiation efficiency of copper and iron was improved because of the ease with which the target minerals could be liberated.

  10. COPPER RESISTANT STRAIN CANDIDA TROPICALIS RomCu5 INTERACTION WITH SOLUBLE AND INSOLUBLE COPPER COMPOUNDS

    Directory of Open Access Journals (Sweden)

    Ie. P. Prekrasna

    2015-10-01

    Full Text Available The focus of the study was interaction of Candida tropicalis RomCu5 isolated from highland Ecuador ecosystem with soluble and insoluble copper compounds. Strain C. tropicalis RomCu5 was cultured in a liquid medium of Hiss in the presence of soluble (copper citrate and CuCl2 and insoluble (CuO and CuCO3 copper compounds. The biomass growth was determined by change in optical density of culture liquid, composition of the gas phase was measured on gas chromatograph, redox potential and pH of the culture fluid was defined potentiometrically. The concentration of soluble copper compounds was determined colorimetrically. Maximal permissible concentration of Cu2+ for C. tropicalis RomCu5 was 30 000 ppm of Cu2+ in form of copper citrate and 500 ppm of Cu2+ in form of CuCl2. C. tropicalis was metabolically active at super high concentrations of Cu2+, despite the inhibitory effect of Cu2+. C. tropicalis immobilized Cu2+ in the form of copper citrate and CuCl2 by it accumulation in the biomass. Due to medium acidification C. tropicalis dissolved CuO and CuCO3. High resistance of C. tropicalis to Cu2+ and ability to interact with soluble and insoluble copper compounds makes it biotechnologically perspective.

  11. Relative bioavailability of copper in tribasic copper chloride to copper in copper sulfate for laying hens based on egg yolk and feather copper concentrations.

    Science.gov (United States)

    Kim, J W; Kim, J H; Shin, J E; Kil, D Y

    2016-07-01

    This experiment was conducted to determine the relative bioavailability (RBV) of Cu in tribasic copper chloride (TBCC) to Cu in copper sulfate (monohydrate form; CuSO4·H2O) for layer diets based on egg yolk and feather Cu concentrations. A total of 252, 72-wk-old Hy-Line Brown laying hens were allotted to 1 of 7 treatments with 6 replicates consisting of 6 hens per replicate in a completely randomized design. Hens were fed corn-soybean meal-based basal diets supplemented with 0 (basal), 100, 200, or 300 mg/kg Cu from CuSO4 or TBCC for 4 wk. Results indicated that egg production, egg weight, and egg mass were not affected by dietary treatments. However, increasing inclusion levels of Cu in diets from CuSO4 decreased (P hens fed diets containing CuSO4 than for hens fed diets containing TBCC. The values for the RBV of Cu in TBCC to Cu in CuSO4 based on log10 transformed egg yolk and feather Cu concentrations were 107.4% and 69.5%, respectively. These values for the RBV of Cu in TBCC did not differ from Cu in CuSO4 (100%). The RBV measured in egg yolk did not differ from the RBV measured in feather. In conclusion, the RBV of Cu in TBCC to Cu in CuSO4 can be determined using Cu concentrations of egg yolk and feathers although the values depend largely on target tissues of laying hens. For a practical application, however, the RBV value of Cu in TBCC to Cu in CuSO4 could be 88.5% when the RBV values determined using egg yolk and feather Cu concentrations were averaged.

  12. Leaching of copper-ethanolamine based preservatives from wood

    OpenAIRE

    Humar, Miha

    2006-01-01

    Copper-ethanolamine based preservatives are successfully replacing classical copper-chromium based preservative solutions. In this paper, the proposed fixation mechanisms are described. Additionaly,basic facts that influence copper leaching from wood are elucidated: composition and concentration of solutions, time and temperature of fixation as well as wood species and treatment method used. The results show that addition of ethanolamine significiantly improves copper fixation, but can on the...

  13. Body of Knowledge (BOK) for Copper Wire Bonds

    Science.gov (United States)

    Rutkowski, E.; Sampson, M. J.

    2015-01-01

    Copper wire bonds have replaced gold wire bonds in the majority of commercial semiconductor devices for the latest technology nodes. Although economics has been the driving mechanism to lower semiconductor packaging costs for a savings of about 20% by replacing gold wire bonds with copper, copper also has materials property advantages over gold. When compared to gold, copper has approximately: 25% lower electrical resistivity, 30% higher thermal conductivity, 75% higher tensile strength and 45% higher modulus of elasticity. Copper wire bonds on aluminum bond pads are also more mechanically robust over time and elevated temperature due to the slower intermetallic formation rate - approximately 1/100th that of the gold to aluminum intermetallic formation rate. However, there are significant tradeoffs with copper wire bonding - copper has twice the hardness of gold which results in a narrower bonding manufacturing process window and requires that the semiconductor companies design more mechanically rigid bonding pads to prevent cratering to both the bond pad and underlying chip structure. Furthermore, copper is significantly more prone to corrosion issues. The semiconductor packaging industry has responded to this corrosion concern by creating a palladium coated copper bonding wire, which is more corrosion resistant than pure copper bonding wire. Also, the selection of the device molding compound is critical because use of environmentally friendly green compounds can result in internal CTE (Coefficient of Thermal Expansion) mismatches with the copper wire bonds that can eventually lead to device failures during thermal cycling. Despite the difficult problems associated with the changeover to copper bonding wire, there are billions of copper wire bonded devices delivered annually to customers. It is noteworthy that Texas Instruments announced in October of 2014 that they are shipping microcircuits containing copper wire bonds for safety critical automotive applications

  14. Gigantic Copper-Molybdenum Mining Project Contract Signed in Guangdong

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>With the reserves of nearly 1,000,000 tons of copper and approximately 250,000 tons of molybdenum and a total investment of RMB 5 billion, Guangdong Fengkai Yuanzhushan copper-molybdenum mining project contract was inked on October 13, 2011. It is reported that this is China’s second largest open-cast copper molybdenum mine next only to Dexing Copper Mine.

  15. A new acid pickling process for copper alloys

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The cleaning process of removing oxides on the surface of copper alloy sheets was investigated systematically. Through optimizing, a perfect process was selected that is fit for removing oxides on the surface. By acid pickling, all kinds of copper oxides are removed completely, furthermore, no poisonous gases are given out and a smooth and clean surface of copper alloys is obtained. At present, the process is applied successfully in the copper-processing industry.

  16. Preliminary Model of Porphyry Copper Deposits

    Science.gov (United States)

    Berger, Byron R.; Ayuso, Robert A.; Wynn, Jeffrey C.; Seal, Robert R., II

    2008-01-01

    The U.S. Geological Survey (USGS) Mineral Resources Program develops mineral-deposit models for application in USGS mineral-resource assessments and other mineral resource-related activities within the USGS as well as for nongovernmental applications. Periodic updates of models are published in order to incorporate new concepts and findings on the occurrence, nature, and origin of specific mineral deposit types. This update is a preliminary model of porphyry copper deposits that begins an update process of porphyry copper models published in USGS Bulletin 1693 in 1986. This update includes a greater variety of deposit attributes than were included in the 1986 model as well as more information about each attribute. It also includes an expanded discussion of geophysical and remote sensing attributes and tools useful in resource evaluations, a summary of current theoretical concepts of porphyry copper deposit genesis, and a summary of the environmental attributes of unmined and mined deposits.

  17. Copper Electrodeposition for 3D Integration

    CERN Document Server

    Beica, Rozalia; Ritzdorf, Tom

    2008-01-01

    Two dimensional (2D) integration has been the traditional approach for IC integration. Due to increasing demands for providing electronic devices with superior performance and functionality in more efficient and compact packages, has driven the semiconductor industry to develop more advanced packaging technologies. Three-dimensional (3D) approaches address both miniaturization and integration required for advanced and portable electronic products. Vertical integration proved to be essential in achieving a greater integration flexibility of disparate technologies, reason for which a general trend of transition from 2D to 3D integration is currently being observed in the industry. 3D chip integration using through silicon via (TSV) copper is considered one of the most advanced technologies among all different types of 3D packaging technologies. Copper electrodeposition is one of technologies that enable the formation of TSV structures. Because of its well-known application for copper damascene, it was believed ...

  18. Studies on copper coating on carbon fibers

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The weak interface bonding of metal matrix reinforced by carbon fibers is the central problem of fabricating such composites. Depositing copper coating on carbon fibers is regarded as a feasible method to solve the problem. In this paper, copper coating has been deposited on the fibers through both electroless deposition and electroplating methods. Two kinds of complexing agents and two stabilizing agents are taken during the electroless plating process. The solution is stable, and little extraneous component is absorbed on the surface. After adding additive agents and increasing the concentration of H2SO4 to the acid cupric sulfate electrolyte, the "black core" during usual electroplating process is avoided. The quality of copper coating is analyzed using SEM and XRD, etc.

  19. Surface properties of copper based cermet materials

    Energy Technology Data Exchange (ETDEWEB)

    Voinea, M. [The Centre: Product Design for Sustainable Development, Transilvania University of Brasov, Eroilor 29, 500036 (Romania)], E-mail: m.voinea@unitbv.ro; Vladuta, C.; Bogatu, C.; Duta, A. [The Centre: Product Design for Sustainable Development, Transilvania University of Brasov, Eroilor 29, 500036 (Romania)

    2008-08-25

    The paper presents the characterization of the surface properties of copper based cermets obtained by two different techniques: spray pyrolysis deposition (SPD) and electrodeposition. Copper acetate was used as precursor of Cu/CuO{sub x} cermet. The surface morphology was tailored by adding copolymers of maleic anhydride with controlled hydrophobia. The films morphology of Cu/CuO{sub x} was assessed using contact angle measurements and AFM analysis. The porous structures obtained via SPD lead to higher liquid adsorption rate than the electrodeposited films. A highly polar liquid - water is recommended as testing liquid in contact angle measurements, for estimating the porosity of copper based cermets, while glycerol can be used to distinguish among ionic and metal predominant structures. Thus, contact angle measurements can be used for a primary evaluation of the films morphology and, on the other hand, of the ratio between the cermet components.

  20. Graphene-protected copper and silver plasmonics

    Science.gov (United States)

    Kravets, V. G.; Jalil, R.; Kim, Y.-J.; Ansell, D.; Aznakayeva, D. E.; Thackray, B.; Britnell, L.; Belle, B. D.; Withers, F.; Radko, I. P.; Han, Z.; Bozhevolnyi, S. I.; Novoselov, K. S.; Geim, A. K.; Grigorenko, A. N.

    2014-01-01

    Plasmonics has established itself as a branch of physics which promises to revolutionize data processing, improve photovoltaics, and increase sensitivity of bio-detection. A widespread use of plasmonic devices is notably hindered by high losses and the absence of stable and inexpensive metal films suitable for plasmonic applications. To this end, there has been a continuous search for alternative plasmonic materials that are also compatible with complementary metal oxide semiconductor technology. Here we show that copper and silver protected by graphene are viable candidates. Copper films covered with one to a few graphene layers show excellent plasmonic characteristics. They can be used to fabricate plasmonic devices and survive for at least a year, even in wet and corroding conditions. As a proof of concept, we use the graphene-protected copper to demonstrate dielectric loaded plasmonic waveguides and test sensitivity of surface plasmon resonances. Our results are likely to initiate wide use of graphene-protected plasmonics. PMID:24980150

  1. Monovalent copper-activated oxygenated insulators

    Science.gov (United States)

    Parent, C.; Boutinaud, P.; Flem, G. Le; Moine, B.; Pedrini, C.; Garcia, D.; Faucher, M.

    1994-12-01

    The photoluminescence of monovalent copper in oxygenated insulators has been extensively studied. The spectroscopy and the excited states dynamics of Cu + ions were investigated as a function of the copper concentration and temperature in various glassy and crystallized materials, essentially borates and phosphates. The broad band fluorescences observed in the visible range under UV excitation arise from two main emitting centers: isolated Cu + ions and (Cu +) 2 pairs. The spectroscopic characteristics of isolated Cu + depend strongly on the local structure, whereas those of the copper pairs remain nearly unaltered whatever the host-matrix. Energy diagrams are proposed for both centers, using ab initio LCAO calculations, in connection with structural investigations involving XRD, ND and EXAFS spectroscopies. Borate glasses can be considered as potential laser sources for tunable output in the whole visible range.

  2. REMOVAL OF COPPER ELECTROLYTE CONTAMINANTS BY ADSORPTION

    Directory of Open Access Journals (Sweden)

    B Gabai

    1997-09-01

    Full Text Available Abstract - Selective adsorbents have become frequently used in industrial processes. Recent studies have shown the possibility of using adsorption to separate copper refinery electrolyte contaminants, with better results than those obtained with conventional techniques. During copper electrorefinning, many impurities may be found as dissolved metals present in the anode slime which forms on the electrode surface, accumulated in the electrolyte or incorporated into the refined copper on the cathode by deposition. In this study, synthetic zeolites, chelating resins and activated carbons were tested as adsorbents to select the best adsorbent performance, as well as the best operating temperature for the process. The experimental method applied was the finite bath, which consists in bringing the adsorbent into contact with a finite volume of electrolyte while controlling the temperature. The concentration of metals in the liquid phase was continuously monitored by atomic absorption spectrophotometry (AAS

  3. Acute toxicity of copper to sea catfish

    Energy Technology Data Exchange (ETDEWEB)

    Steele, C.W.

    1983-01-01

    Sea catfish (Arius felis) were exposed to aqueous solutions of reagent grade cupric chloride in artificial seawater (30.0 +/- 2.0 0/00, 21-23/sup 0/C) in four static bioassays. The 24, 48, 72 and 96 h LC/sub 50/ were calculated and found to be 5.43, 4.17, 3.57 and 2.40 mg 1./sup -1/ copper, respectively. Experimental concentrations of copper producing subtle behavioral changes in this species correspond to less than 0.3% of the 72 h LC/sub 50/. Based on this comparison with literature values, a new, maximum 'safe' concentration for copper in marine waters of 0.01 mg 1./sup -1/ is proposed.

  4. Copper Oxide Nanoparticles Synthesis by Electrochemical Method

    Directory of Open Access Journals (Sweden)

    Nitin DIGHORE

    2016-05-01

    Full Text Available Copper oxide nanoparticles were prepared by electrochemical reduction method which is environmental benign. Tetra ethyl ammonium bromide (TEAB, tetra propyl ammonium bromide (TPAB, tetra butyl ammonium bromide (TBAB were used as stabilizing agent in an organic medium viz. tetra hydro furan (THF and acetonitrile (ACN in 4:1 ratio by optimizing current density. The reduction process takes place under atmospheric condition over a period of 2 h. Such nanoparticles were prepared using simple electrolysis cell in which the sacrificial anode was a commercially available copper metal sheet and platinum (inert sheet acted as a cathode. The stabilizers were used to control the size of a nanoparticles. The synthesized copper oxide nanoparticles were characterized by using UV-Visible, FT-IR, XRD, SEM-EDS and TEM analysis techniques.DOI: http://dx.doi.org/10.5755/j01.ms.22.2.7501

  5. Zinc, copper and selenium in reproduction.

    Science.gov (United States)

    Bedwal, R S; Bahuguna, A

    1994-07-15

    Of the nine biological trace elements, zinc, copper and selenium are important in reproduction in males and females. Zinc content is high in the adult testis, and the prostate has a higher concentration of zinc than any other organ of the body. Zinc deficiency first impairs angiotensin converting enzyme (ACE) activity, and this in turn leads to depletion of testosterone and inhibition of spermatogenesis. Defects in spermatozoa are frequently observed in the zinc-deficient rat. Zinc is thought to help to extend the functional life span of the ejaculated spermatozoa. Zinc deficiency in the female can lead to such problems as impaired synthesis/secretion of (FSH) and (LH), abnormal ovarian development, disruption of the estrous cycle, frequent abortion, a prolonged gestation period, teratogenicity, stillbirths, difficulty in parturition, pre-eclampsia, toxemia and low birth weights of infants. The level of testosterone in the male has been suggested to play a role in the severity of copper deficiency. Copper-deficient female rats are protected against mortality due to copper deficiency, and the protection has been suggested to be provided by estrogens, since estrogens alter the subcellular distribution of copper in the liver and increase plasma copper levels by inducing ceruloplasmin synthesis. The selenium content of male gonads increases during pubertal maturation. Selenium is localized in the mitochondrial capsule protein (MCP) of the midpiece. Maximal incorporation in MCP occurs at steps 7 and 12 of spermatogenesis and uptake decreases by step 15. Selenium deficiency in females results in infertility, abortions and retention of the placenta. The newborns from a selenium-deficient mother suffer from muscular weakness, but the concentration of selenium during pregnancy does not have any effect on the weight of the baby or length of pregnancy. The selenium requirements of a pregnant and lactating mother are increased as a result of selenium transport to the fetus via

  6. Copper removal using electrosterically stabilized nanocrystalline cellulose.

    Science.gov (United States)

    Sheikhi, Amir; Safari, Salman; Yang, Han; van de Ven, Theo G M

    2015-06-03

    Removal of heavy metal ions such as copper using an efficient and low-cost method with low ecological footprint is a critical process in wastewater treatment, which can be achieved in a liquid phase using nanoadsorbents such as inorganic nanoparticles. Recently, attention has turned toward developing sustainable and environmentally friendly nanoadsorbents to remove heavy metal ions from aqueous media. Electrosterically stabilized nanocrystalline cellulose (ENCC), which can be prepared from wood fibers through periodate/chlorite oxidation, has been shown to have a high charge content and colloidal stability. Here, we show that ENCC scavenges copper ions by different mechanisms depending on the ion concentration. When the Cu(II) concentration is low (C0≲200 ppm), agglomerates of starlike ENCC particles appear, which are broken into individual starlike entities by shear and Brownian motion, as evidenced by photometric dispersion analysis, dynamic light scattering, and transmission electron microscopy. On the other hand, at higher copper concentrations, the aggregate morphology changes from starlike to raftlike, which is probably due to the collapse of protruding dicarboxylic cellulose (DCC) chains and ENCC charge neutralization by copper adsorption. Such raftlike structures result from head-to-head and lateral aggregation of neutralized ENCCs as confirmed by transmission electron microscopy. As opposed to starlike aggregates, the raftlike structures grow gradually and are prone to sedimentation at copper concentrations C0≳500 ppm, which eliminates a costly separation step in wastewater treatment processes. Moreover, a copper removal capacity of ∼185 mg g(-1) was achieved thanks to the highly charged DCC polyanions protruding from ENCC. These properties along with the biorenewability make ENCC a promising candidate for wastewater treatment, in which fast, facile, and low-cost removal of heavy metal ions is desired most.

  7. Mechanism of copper selenide growth on copper-oxide selenium system

    Science.gov (United States)

    Ishikawa, Y.; Kido, O.; Kimura, Y.; Kurumada, M.; Suzuki, H.; Saito, Y.; Kaito, C.

    2004-01-01

    Transmission electron microscopy was used to study spontaneous copper selenide formation on Cu particles covered with an oxide layer. Even if the copper particle surface was covered with a Cu 2O layer, selenides were formed by diffusion through the metal oxide layer. For a particle size less than 50 nm, selenide was formed in Cu particles by the diffusion of Se atoms passing through the Cu 2O layer. For particles larger than 100 nm in size, selenide was formed in Se film. It was also found that the thickness of the Cu 2O layer on the surface of Cu particle accelerated diffusion of Se atoms to the copper particle.

  8. Comparative effects of dissolved copper and copper oxide nanoparticle exposure to the sea anemone, Exaiptasia pallida

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqui, Samreen; Goddard, Russell H.; Bielmyer-Fraser, Gretchen K., E-mail: gkbielmyer@valdosta.edu

    2015-03-15

    Highlights: • Differences between CuO NP and CuCl{sub 2} exposure were characterized. • Copper accumulation in E. pallida was concentration-dependent. • E. pallida exposed to CuCl{sub 2} accumulated higher copper tissue burdens. • The oxidative stress response was greater in E. pallida exposed to CuO NP. • Both forms of copper inhibited CA activity in E. pallida. - Abstract: Increasing use of metal oxide nanoparticles (NP) by various industries has resulted in substantial output of these NP into aquatic systems. At elevated concentrations, NP may interact with and potentially affect aquatic organisms. Environmental implications of increased NP use are largely unknown, particularly in marine systems. This research investigated and compared the effects of copper oxide (CuO) NP and dissolved copper, as copper chloride (CuCl{sub 2}), on the sea anemone, Exaiptasia pallida. Sea anemones were collected over 21 days and tissue copper accumulation and activities of the enzymes: catalase, glutathione peroxidase, glutathione reductase, and carbonic anhydrase were quantified. The size and shape of CuO NP were observed using a ecanning electron microscope (SEM) and the presence of copper was confirmed by using Oxford energy dispersive spectroscopy systems (EDS/EDX). E. pallida accumulated copper in their tissues in a concentration- and time-dependent manner, with the animals exposed to CuCl{sub 2} accumulating higher tissue copper burdens than those exposed to CuO NP. As a consequence of increased copper exposure, as CuO NP or CuCl{sub 2}, anemones increased activities of all of the antioxidant enzymes measured to some degree, and decreased the activity of carbonic anhydrase. Anemones exposed to CuO NP generally had higher anti-oxidant enzyme activities than those exposed to the same concentrations of CuCl{sub 2}. This study is useful in discerning differences between CuO NP and dissolved copper exposure and the findings have implications for exposure of aquatic

  9. Studies on Cementation of Tin on Copper and Tin Stripping from Copper Substrate

    Directory of Open Access Journals (Sweden)

    Rudnik E.

    2016-06-01

    Full Text Available Cementation of tin on copper in acid chloride-thiourea solutions leads to the formation of porous layers with a thickness dependent on the immersion time. The process occurs via Sn(II-Cu(I mechanism. Chemical stripping of tin was carried out in alkaline and acid solutions in the presence of oxidizing agents. It resulted in the dissolution of metallic tin, but refractory Cu3Sn phase remained on the copper surface. Electrochemical tin stripping allows complete tin removal from the copper substrate, but porosity and complex phase composition of the tin coating do not allow monitoring the process in unambiguous way.

  10. Simulated small-scale pilot heap leaching of low-grade copper sulfide ore with selective extraction of copper

    Institute of Scientific and Technical Information of China (English)

    QIN Wen-qing; ZHANG Yan-sheng; LI Wei-zhong; WANG Jun

    2008-01-01

    The bioleaching of low-grade copper sulfide ore and the selective extraction of copper were investigated.Lix984 dissolved in kerosene was used as extractant.The results show that it is possible to selectively leach copper from the ores by heap leaching.The copper concentration of leaching liquor after 250 d is 2.17 g/L,and the copper concentration is 0.27 g/L after solvent extraction.The leach liquor was subjected to solvent extraction,scrubbing and selective stripping for the enrichment of copper and the removal of impurities.The pregnant copper sulfate solution produced from the stripping cycle is suitable for copper electro-winning.

  11. Removal of copper from copper-contaminated river water and aqueous solutions using Methylobacterium extorquens modified Erzurum clayey soil

    National Research Council Canada - National Science Library

    Neslihan Celebi; Hayrunnisa Nadaroglu; Ekrem Kalkan; Recep Kotan

    2016-01-01

    ... adsorbent materials for the removal of copper from aqueous solution. The copper concentrations in the samples of the polluted river water and CuCl solutions treated by the natural and bacteria-modified Erzurum clayey soil (ECS...

  12. 2010 Q3 China Copper Scrap Market Analysis

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>Analysis of price change tendency of copper scrap In Q3 2010, China’s copper scrap price re-bounded. Although the price dropped by 1.2% q-o-q, it rose by 22.07% y-o-y. In September, average price of copper scrap reached RMB 52350/ton.

  13. Copper deficiency in a herd of captive muskoxen.

    OpenAIRE

    Blakley, B R; S. C. Tedesco; Flood, P F

    1998-01-01

    At necropsy, a mature muskox cow was found to have exceedingly low serum and liver copper concentrations of 4.8 = mumol/L and 0.02 mmol/kg, respectively. Serum copper levels were also low in remaining members of the herd but returned to normal after parenteral treatment with calcium copper edetate.

  14. 21 CFR 73.125 - Sodium copper chlorophyllin.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Sodium copper chlorophyllin. 73.125 Section 73.125... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Foods § 73.125 Sodium copper chlorophyllin. (a) Identity. (1) The color additive sodium copper chlorophyllin is a green to black powder prepared from chlorophyll...

  15. 21 CFR 73.2120 - Disodium EDTA-copper.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Disodium EDTA-copper. 73.2120 Section 73.2120 Food... COLOR ADDITIVES EXEMPT FROM CERTIFICATION Cosmetics § 73.2120 Disodium EDTA-copper. (a) Identity. The color additive disodium EDTA-copper is disodium ] (4-)-N,N′,O,O′,O N,O N′] cuprate (2-)....

  16. Tuning of copper nanocrystals optical properties with their shapes.

    Science.gov (United States)

    Salzemann, C; Brioude, A; Pileni, M-P

    2006-04-13

    Copper nanocrystals are obtained by chemical reduction of copper ions in mixed reverse micelles. A large excess of reducing agent favors producing a new generation of shaped copper nanocrystals as nanodisks, elongated nanocrystals, and cubes. By using UV-Visible spectroscopy and numerical optical simulations we demonstrate that the optical properties are tuned by the relative proportions of spheres and nanodisks.

  17. 49 CFR 192.125 - Design of copper pipe.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Design of copper pipe. 192.125 Section 192.125... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Pipe Design § 192.125 Design of copper pipe. (a) Copper pipe used in mains must have a minimum wall thickness of 0.065 inches (1.65 millimeters) and must be...

  18. JCC’s Largest Copper Production Base Found in Zengcheng

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>On 29 December 2010,a ground-breaking ceremony for the 400,000-ton copper rod (wire) project of JCC Guangzhou Copper Co.,Ltd.(one of major projects of Jiangxi Copper Corporation (JCC) in the 12th Five-Year Plan

  19. Copper Smelters Ask for Resumption of the Preferential Tax

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>China’s major copper smelters have asked the related government authorities to resume the preferential tax policies on the export of copper and gold. These policies, just eliminated in January this year, allow the smelters to export copper and gold free from tax payment.

  20. Jiangxi Hengfeng Nanfang Copper Reconstruction & Extension Project Signed

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>The reconstruction & extension project (phase II) of Nanfang Copper has been recently signed. With an investment of RMB 0.8 billion, the project is expected to produce 50,000 tons of anode copper and electrolytic copper respectively per year with output value of RMB 3 billion, and will further enhance development

  1. The Current Situation of Precision Copper Tube Capacity in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Precision copper tube generally refers to seam- less copper and copper alloy production tube with high dimension precision,high surface quality,narrow performance range and meeting strict requirements on other general perform- ances such as erosion resistance.These prod-

  2. 10000 Tonnes Of Copper Concentrate Arrived At Nanjing Port

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    On March 20,a cargo ship loaded with 10000tonnes of copper concentrate docked at Nanjing Port,signaling that the biggest overseas acquisition project of China’s metal industry received concrete result.On that day,the first batch shipment of 11330tonnes of copper concentrate from Peru Las Bambas Copper Mine,a project jointly

  3. Proline improves copper tolerance in chickpea (Cicer arietinum).

    Science.gov (United States)

    Singh, Vijeta; Bhatt, Indu; Aggarwal, Anjali; Tripathi, Bhumi Nath; Munjal, Ashok Kumar; Sharma, Vinay

    2010-09-01

    The present study suggests the involvement of proline in copper tolerance of four genotypes of Cicer arietinum (chickpea). Based on the data of tolerance index and lipid peroxidation, the order for copper tolerance was as follows: RSG 888 > CSG 144 > CSG 104 > RSG 44 in the selected genotypes. The basis of differential copper tolerance in chickpea genotypes was characterized by analyzing, antioxidant enzymes (superoxide dismutase, ascorbated peroxidase and catalase), phytochelatins, copper uptake, and proline accumulation. Chickpea genotypes showed stimulated superoxide dismutase activity at all tested concentrations of copper, but H(2)O(2) decomposing enzymes especially; ascorbate peroxidase did not increase with 25 and 50 microM copper treatments. Catalase activity, however, increased at lower copper concentrations but failed to stimulate at 50 microM copper. Such divergence in responses of these enzymes minimizes their importance in protecting chickpea against copper stress. The sensitive genotypes showed greater enhancement of phytochelatins than that of tolerant genotypes. Hence, the possibility of phytochelatins in improving copper tolerance in the test plant is also excluded. Interestingly, the order of proline accumulation in the chickpea genotypes (RSG 888 > CSG 144 > CSG 104 > RSG 44) was exactly similar to the order of copper tolerance. Based on hyperaccumulation of proline in tolerant genotype (RSG 44) and the reduction and improvement of lipid peroxidation and tolerance index, respectively, by proline pretreatment, we conclude that hyperaccumulation of proline improves the copper tolerance in chickpea.

  4. Copper: Its Environmental Impacts. AIO Red Paper #22.

    Science.gov (United States)

    Boutis, Elizabeth; Jantzen, Jonathan Landis, Ed.

    Although copper is a widespread and useful metal, the process of mining and refining copper can have severe detrimental impacts on humans, plants, and animals. The most serious impacts from copper production are the release of sulphur dioxide and other air pollutants and the poisoning of water supplies. These impacts occur in both the mining and…

  5. Recrystallization of deformed copper - kinetics and microstructural evolution

    DEFF Research Database (Denmark)

    Lin, Fengxiang

    The objective of this study is to investigate the recrystallization kinetics and microstructural evolution in copper deformed to high strains, including copper deformed by cold-rolling and copper deformed by dynamic plastic deformation (DPD). Various characterization techniques were used, including...

  6. Bioavailable copper modulates oxidative phosphorylation and growth of tumors.

    Science.gov (United States)

    Ishida, Seiko; Andreux, Pénélope; Poitry-Yamate, Carole; Auwerx, Johan; Hanahan, Douglas

    2013-11-26

    Copper is an essential trace element, the imbalances of which are associated with various pathological conditions, including cancer, albeit via largely undefined molecular and cellular mechanisms. Here we provide evidence that levels of bioavailable copper modulate tumor growth. Chronic exposure to elevated levels of copper in drinking water, corresponding to the maximum allowed in public water supplies, stimulated proliferation of cancer cells and de novo pancreatic tumor growth in mice. Conversely, reducing systemic copper levels with a chelating drug, clinically used to treat copper disorders, impaired both. Under such copper limitation, tumors displayed decreased activity of the copper-binding mitochondrial enzyme cytochrome c oxidase and reduced ATP levels, despite enhanced glycolysis, which was not accompanied by increased invasiveness of tumors. The antiproliferative effect of copper chelation was enhanced when combined with inhibitors of glycolysis. Interestingly, larger tumors contained less copper than smaller tumors and exhibited comparatively lower activity of cytochrome c oxidase and increased glucose uptake. These results establish copper as a tumor promoter and reveal that varying levels of copper serves to regulate oxidative phosphorylation in rapidly proliferating cancer cells inside solid tumors. Thus, activation of glycolysis in tumors may in part reflect insufficient copper bioavailability in the tumor microenvironment.

  7. Copper-associated hepatitis in dogs; pathogenesis, diagnosis and treatment

    NARCIS (Netherlands)

    Dirksen, K.

    2016-01-01

    Copper is an essential trace element for living organisms, but can have deleterious consequences when present in excess. Because the liver has a central role in copper metabolism, this is the predominant organ affected. Copper-accumulating disorders are recognized as hereditary diseases in man and o

  8. Luminescent Colloidal Semiconductor Nanocrystals Containing Copper: Synthesis, Photophysics, and Applications.

    Science.gov (United States)

    Knowles, Kathryn E; Hartstein, Kimberly H; Kilburn, Troy B; Marchioro, Arianna; Nelson, Heidi D; Whitham, Patrick J; Gamelin, Daniel R

    2016-09-28

    Copper-doped semiconductors are classic phosphor materials that have been used in a variety of applications for many decades. Colloidal copper-doped semiconductor nanocrystals have recently attracted a great deal of interest because they combine the solution processability and spectral tunability of colloidal nanocrystals with the unique photoluminescence properties of copper-doped semiconductor phosphors. Although ternary and quaternary semiconductors containing copper, such as CuInS2 and Cu2ZnSnS4, have been studied primarily in the context of their photovoltaic applications, when synthesized as colloidal nanocrystals, these materials have photoluminescence properties that are remarkably similar to those of copper-doped semiconductor nanocrystals. This review focuses on the luminescent properties of colloidal copper-doped, copper-based, and related copper-containing semiconductor nanocrystals. Fundamental investigations into the luminescence of copper-containing colloidal nanocrystals are reviewed in the context of the well-established luminescence mechanisms of bulk copper-doped semiconductors and copper(I) molecular coordination complexes. The use of colloidal copper-containing nanocrystals in applications that take advantage of their luminescent properties, such as bioimaging, solid-state lighting, and luminescent solar concentrators, is also discussed.

  9. NMIA:Strictly Control Newly Added Copper Production Capacity

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    Recently,Jia Mingxing,Vice President&Secretary-general and spokesperson of the China Nonferrous Metals Industry Association,expressed his views on the current copper industry and copper market.Jia Mingxing said,within a considerably long period of time,copper remains the biggest metal variety in the nonferrous metals industry.

  10. Photoluminescence Study of Copper Selenide Thin Films

    Science.gov (United States)

    Urmila, K. S.; Asokan, T. Namitha; Pradeep, B.

    2011-10-01

    Thin films of Copper Selenide of composition of composition Cu7Se4 with thickness 350 nm are deposited on glass substrate at a temperature of 498 K±5 K and pressure of 10-5 mbar using reactive evaporation, a variant of Gunther's three temperature method with high purity Copper (99.999%) and Selenium (99.99%) as the elemental starting material. The deposited film is characterized structurally using X-ray Diffraction. The structural parameters such as lattice constant, particle size, dislocation density; number of crystallites per unit area and strain in the film are evaluated. Photoluminescence of the film is analyzed at room temperature using Fluoro Max-3 Spectrofluorometer.

  11. Electrokinetic remediation of copper mine tailings

    DEFF Research Database (Denmark)

    Hansen, Henrik K.; Rojo, Adrián; Ottosen, Lisbeth M.

    2007-01-01

    in similar experiments but without the bipolar electrodes. The new electrokinetic remediation design was tested on copper mine tailings with different applied electric fields, remediation times and pre-treatment. The results showed that the copper removal was increased from 8% (applying 20V for 8 days...... in sulphuric acidified tailings) without bipolar electrodes to 42% when bipolar electrodes were implemented. Furthermore, the results showed that in this system sulphuric acid addition prior to remediation was better than citric acid addition. In addition, applying a too strong electric field (even...

  12. Electron impact single ionization of copper

    Indian Academy of Sciences (India)

    L K Jha; O P Roy; B N Roy

    2000-09-01

    Electron impact single ionization cross sections of copper have been calculated in the binary encounter approximation using accurate expression for as given by Vriens and Hartree–Fock momentum distribution for the target electron. The BEA calculation based on the usual procedure does not show satisfactory agreement with experiment in this case but a striking modification is found to be successful in explaining the experimental observations. The discrepancy is linked with the ionization of the 310 electrons and probably effective single ionization does not take place from 3 shell of copper leading to smaller values of experimental cross sections.

  13. Cation Effect on Copper Chemical Mechanical Polishing

    Institute of Scientific and Technical Information of China (English)

    WANG Liang-Yong; LIU Bo; SONG Zhi-Tang; FENG Song-Lin

    2009-01-01

    We examine the effect of cations in solutions containing benzotriazole (BTA) and H2O2 on copper chemical mechanical polishing (CMP). On the base of atomic force microscopy (AFM) and material removal rate (MRR) results, it is found that ammonia shows the highest MRR as well as good surface after CMP, while KOH demon-strates the worst performance. These results reveal a mechanism that sma//molecules with lone-pairs rather than molecules with steric effect and common inorganic cations are better for copper CMP process, which is indirectly confirmed by open circuit potential (OCP).

  14. Cation Effect on Copper Chemical Mechanical Polishing

    Science.gov (United States)

    Wang, Liang-Yong; Liu, Bo; Song, Zhi-Tang; Feng, Song-Lin

    2009-02-01

    We examine the effect of cations in solutions containing benzotriazole (BTA) and H2O2 on copper chemical mechanical polishing (CMP). On the base of atomic force microscopy (AFM) and material removal rate (MRR) results, it is found that ammonia shows the highest MRR as well as good surface after CMP, while KOH demonstrates the worst performance. These results reveal a mechanism that small molecules with lone-pairs rather than molecules with steric effect and common inorganic cations are better for copper CMP process, which is indirectly confirmed by open circuit potential (OCP).

  15. Synergistic effects of additives to benzotriazole solutions applied as corrosion inhibitors to archaeological copper and copper alloy artefacts.

    OpenAIRE

    Golfomitsou, S.

    2006-01-01

    Benzotriazole (BTA) is a corrosion inhibitor extensively used for the stabilisation of active corrosion of archaeological copper and copper alloys. However, BTA often fails to effectively retard corrosion when applied on heavily corroded artefacts. Although there are numerous studies about its mode of action on clean copper, there is no comprehensive understanding about the way it is bonded to corroded copper. This thesis aimed to understand and compare BTA and its mode of action on clean and...

  16. Erythrocyte copper chaperone for superoxide dismutase and superoxide dismutase as biomarkers for hepatic copper concentrations in Labrador retrievers

    NARCIS (Netherlands)

    Dirksen, K; Roelen, Y S; van Wolferen, M E; Kruitwagen, H S; Penning, L C; Burgener, I A; Spee, B; Fieten, H

    2016-01-01

    Hereditary hepatic copper accumulation in Labrador retrievers leads to hepatitis with fibrosis and eventually cirrhosis. The development of a non-invasive blood-based biomarker for copper status in dogs could be helpful in identifying dogs at risk and to monitor copper concentrations during

  17. A docking approach to the study of copper trafficking proteins: interaction between metallochaperones and soluble domains of copper ATPases

    NARCIS (Netherlands)

    Arnesano, F.; Banci, L.; Bertini, I.; Bonvin, A.M.J.J.

    2004-01-01

    A structural model of the transient complex between the yeast copper chaperone Atx1 and the first soluble domain of the copper transporting ATPase Ccc2 was obtained with HADDOCK, combining NMR chemical shift mapping information with in silico docking. These two proteins are involved in copper traffi

  18. Copper-induced apical trafficking of ATP7B in polarized hepatoma cells provides a mechanism for biliary copper excretion

    NARCIS (Netherlands)

    Roelofsen, H; Wolters, H; Van Luyn, MJA; Miura, N; Kuipers, F; Vonk, RJ

    2000-01-01

    Background & Aims: Mutations in the ATP7B gene, encoding a copper-transporting P-type adenosine triphosphatase, lead to excessive hepatic copper accumulation because of impaired biliary copper excretion in Wilson's disease. In human liver, ATP7B is predominantly localized to the trans-Golgi network,

  19. Role of copper oxides in contact killing of bacteria.

    Science.gov (United States)

    Hans, Michael; Erbe, Andreas; Mathews, Salima; Chen, Ying; Solioz, Marc; Mücklich, Frank

    2013-12-31

    The potential of metallic copper as an intrinsically antibacterial material is gaining increasing attention in the face of growing antibiotics resistance of bacteria. However, the mechanism of the so-called "contact killing" of bacteria by copper surfaces is poorly understood and requires further investigation. In particular, the influences of bacteria-metal interaction, media composition, and copper surface chemistry on contact killing are not fully understood. In this study, copper oxide formation on copper during standard antimicrobial testing was measured in situ by spectroscopic ellipsometry. In parallel, contact killing under these conditions was assessed with bacteria in phosphate buffered saline (PBS) or Tris-Cl. For comparison, defined Cu2O and CuO layers were thermally generated and characterized by grazing incidence X-ray diffraction. The antibacterial properties of these copper oxides were tested under the conditions used above. Finally, copper ion release was recorded for both buffer systems by inductively coupled plasma atomic absorption spectroscopy, and exposed copper samples were analyzed for topographical surface alterations. It was found that there was a fairly even growth of CuO under wet plating conditions, reaching 4-10 nm in 300 min, but no measurable Cu2O was formed during this time. CuO was found to significantly inhibit contact killing, compared to pure copper. In contrast, thermally generated Cu2O was essentially as effective in contact killing as pure copper. Copper ion release from the different surfaces roughly correlated with their antibacterial efficacy and was highest for pure copper, followed by Cu2O and CuO. Tris-Cl induced a 10-50-fold faster copper ion release compared to PBS. Since the Cu2O that primarily forms on copper under ambient conditions is as active in contact killing as pure copper, antimicrobial objects will retain their antimicrobial properties even after oxide formation.

  20. Ambient Facile Synthesis of Gram-Scale Copper Selenide Nanostructures from Commercial Copper and Selenium Powder.

    Science.gov (United States)

    Chen, Xin Qi; Li, Zhen; Dou, Shi Xue

    2015-06-24

    Grams of copper selenides (Cu(2-x)Se) were prepared from commercial copper and selenium powders in the presence of thiol ligands by a one-pot reaction at room temperature. The resultant copper selenides are a mixture of nanoparticles and their assembled nanosheets, and the thickness of nanosheets assembled is strongly dependent on the ratio of thiol ligand to selenium powder. The resultant Cu(2-x)Se nanostructures were treated with hydrazine solution to remove the surface ligands and then explored as a potential thermoelectric candidate in comparison with commercial copper selenide powders. The research provides a novel ambient approach for preparation of Cu(2-x)Se nanocrystallines on a large scale for various applications.

  1. Broadband Wireline Provider Service: Other Copper Wireline; BBRI_otherCopper12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via "Other Copper Wireline" technology. In Rhode Island, this category...

  2. Evaluation of Microscopic Degradation of Copper and Copper Alloy by Electrical Resistivity Measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chung Seok [Hanyang University, Seoul (Korea, Republic of); Nahm, Seung Hoon [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of); Hyun, Chang Young [Seoul National University of Science and Technology, Seoul (Korea, Republic of)

    2010-10-15

    In the present study, the microscopic degradation of copper and copper and alloy subjected to cyclic deformation has been evaluated by the electrical resistivity measurement using the DC four terminal potential method. The copper (Cu) and copper alloy (Cu-35Zn), whose stacking fault energy is much different each other, were cyclically deformed to investigate the response of the electrical resistivity to different dislocation substructures. Dislocation cell substructure was developed in the Cu, while the planar array of dislocation structure was developed in the Cu-35Zn alloy increasing dislocation density with fatigue cycles. The electrical resistivity increased rapidly in the initial stage of fatigue deformation in both materials. Moreover, after the fatigue test it increased by about 7 % for the Cu and 6.5 % for the Cu-35Zn alloy, respectively. From these consistent results, it may be concluded that the dislocation cell structure responds to the electrical resistivity more sensitively than the planar array dislocation structure evolved during cyclic fatigue

  3. Direct preparation of copper organometallics bearing an aldehyde function via an iodine-copper exchange.

    Science.gov (United States)

    Yang, Xiaoyin; Knochel, Paul

    2006-06-21

    The iodine-copper exchange reaction allows the direct preparation of various aryl, heteroaryl and alkenyl cuprates bearing a formyl group, thus allowing a direct synthesis of polyfunctional aldehydes without the need of protecting groups or an additional oxidation step.

  4. Pesticidal copper (I) oxide: environmental fate and aquatic toxicity.

    Science.gov (United States)

    Kiaune, Lina; Singhasemanon, Nan

    2011-01-01

    Besides being a naturally occurring element and an essential micronutrient, copper is used as a pesticide, but at generally higher concentrations. Copper, unlike organic pesticides, does not degrade, but rather enters a complex biogeochemical cycle. In the water column, copper can exist bound to both organic and inorganic species and as free or hydrated copper ions. Water column chemistry affects copper speciation and bioavailability. In all water types (saltwater, brackish water, and freshwater), organic ligands in the water column can sequester the majority of dissolved copper, and therefore, organic ligands play the largest role in copper bioavailability. In freshwater, however, the geochemistry of a particular location, including water column characteristics such as water hardness and pH, is a significant factor that can increase copper bioavailability and toxicity. In most cases, organic ligand concentrations greatly exceed copper ion concentrations in the water column and therefore provide a large buffering capacity. Hence, copper bioavailability can be grossly overestimated if it is based on total dissolved copper (TDCu) concentrations alone. Other factors that influence copper concentrations include location in the water column, season, temperature, depth, and level of dissolved oxygen. For example, concentrations of bioavailable copper may be significantly higher in the bottom waters and sediment pore waters, where organic ligands degrade much faster and dissolved copper is constantly resuspended and recycled into the aquatic system. Aquatic species differ greatly in their sensitivity to copper. Some animals, like mollusks, can tolerate high concentrations of the metal, while others are adversely affected by very low concentrations of copper. Emerging evidence shows that very low, sublethal copper levels can adversely affect the sense of smell and behavior of fish. The developmental stage of the fish at the time of copper exposure is critical to the

  5. The Tax Changes may Let Producers Buy More Copper Scrap

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>China’s new tax policy on the import of copper scrap is made to encourage the scrap imports. However, this move will put more pressure on the downward copper price in the futures market. As reported, from January 1, 2007, China’s import tax on copper scrap will be totally removed and traders believe that this new policy change is meant to encourage the import of scrap copper but this will also help to push down the refined copper price in the futures market.

  6. An Effective Secondary Electron Emission Suppression Treatment For Copper MDC

    Science.gov (United States)

    Curren, Arthur N.; Long, Kenwyn J.; Jensen, Kenneth A.; Roman, Robert F.

    1993-01-01

    Untreated oxygen-free, high-conductivity (OFHC) copper, commonly used for MDC electrodes, exhibits relatively high secondary electron emission characteristics. This paper describes a specialized ion-bombardment procedure for texturing copper surfaces which sharply reduces the emission properties relative to untreated copper. The resulting surface is a particle-free, robust, uniformly highly-textured all-metal structure. The use of this process requires no modifications to copper machining, brazing, or other MDC normal fabrication procedures. The flight TWT for a planned NASA deep space probe, the Cassini Mission, will incorporate copper MDC electrodes treated with the method described here.

  7. Polyurethane nanofibers containing copper nanoparticles as future materials

    DEFF Research Database (Denmark)

    Sheikh, Faheem A.; Kanjwal, Muzafar Ahmed; Saran, Saurabh

    2011-01-01

    In the present study, we aimed to represent a novel approach to fabricate polyurethane nanofibers containing copper nanoparticles (NPs) by simple electrospinning process. A simple method, not depending on additional foreign chemicals, has been employed to utilize prepared copper NPs in polyurethane...... nanofibers. Typically, a colloidal gel consisting of copper NPs and polyurethane has been electrospun. SEM-EDX and TEM results confirmed well oriented nanofibers and good dispersion of pure copper NPs. Copper NPs have diameter in the range of 5–10nm. The thermal stability of the synthesized nanofibers...

  8. Preparation of copper nanofluids using an appropriate technique

    Directory of Open Access Journals (Sweden)

    Hamid Reza Ghorbani

    2014-12-01

    Full Text Available This work focuses on the synthesis of copper nanoparticles. The synthesis involves the use of copper nitrate, polyvinylpyrrolidone (pvp, dextrose and water as the copper precursor, stabilizing agent, reducing agent and solvent respectively.The nanoparticles were characterized by UV-visible spectroscopy, transmission electron microscopy (TEM and dynamic light scattering (DLS. An absorption peak at 580 nm in Uv–Vis spectrophotometer was detected indicating the presence of copper nanoparticles. The DLS analysis showed Copper nanoparticles with size of 5-25 nm.

  9. Characteristics and antimicrobial activity of copper-based materials

    Science.gov (United States)

    Li, Bowen

    In this study, copper vermiculite was synthesized, and the characteristics, antimicrobial effects, and chemical stability of copper vermiculite were investigated. Two types of copper vermiculite materials, micron-sized copper vermiculite (MCV) and exfoliated copper vermiculite (MECV), are selected for this research. Since most of the functional fillers used in industry products, such as plastics, paints, rubbers, papers, and textiles prefer micron-scaled particles, micron-sized copper vermiculite was prepared by jet-milling vermiculite. Meanwhile, since the exfoliated vermiculite has very unique properties, such as high porosity, specific surface area, high aspect ratio of laminates, and low density, and has been extensively utilized as a functional additives, exfoliated copper vermiculite also was synthesized and investigated. The antibacterial efficiency of copper vermiculite was qualitatively evaluated by the diffusion methods (both liquid diffusion and solid diffusion) against the most common pathogenic species: Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Klebsiella pneumoniae (K. pneumoniae). The result showed that the release velocity of copper from copper vermiculite is very slow. However, copper vermiculite clearly has excellent antibacterial efficiency to S. aureus, K. pneumoniae and E. coli. The strongest antibacterial ability of copper vermiculite is its action on S. aureus. The antibacterial efficiency of copper vermiculite was also quantitatively evaluated by determining the reduction rate (death rate) of E. coli versus various levels of copper vermiculite. 10 ppm of copper vermiculite in solution is sufficient to reduce the cell population of E. coli, while the untreated vermiculite had no antibacterial activity. The slow release of copper revealed that the antimicrobial effect of copper vermiculite was due to the strong interactions between copper ions and bacteria cells. Exfoliated copper vermiculite has even stronger

  10. Study on the preparation and properties of ultrafine copper powder

    Institute of Scientific and Technical Information of China (English)

    LIU; Wei-ping; HUANG; Lin; YIN; Yan-hong

    2005-01-01

    In the study, the common copper powder is used as sample, the ultrafine copper powder is researched by a new process of high energy ball milling. The influence of the milling time, the milling intensity, the milling medium, the ratio of hall to material, the dry milling and the wet milling on copper powder size are studied and the rule of every factors influencing properties of copper particle size and specific surface area under the best experimental conditions are acquired. By the regressive analysis of experimental results under the best conditions, the characteristic equation of copper particle prepared by high energy milling is confirmed.

  11. COORDINATION POLYMERIZATION OF BENZOTRIAZOLE ON THE SURFACE OF METALLIC COPPER

    Institute of Scientific and Technical Information of China (English)

    XUE Gi; DAI Qinpin; DING Jianfu; WU Peiyi

    1989-01-01

    The coordination polymerization of benzotriazole with metallic copper has been investigated by infrared and X-ray photoelectron spectroscopies. We found that benzotriazole could react with copper (0) under mild conditions to form bis ( benzotriazolato ) copper (Ⅱ) and benzotriazolato copper(Ⅰ)which covered the surface of copper metal in the shape of polymeric materials. Since benzotriazole is of great interest as a ligand in that its presence in many biological system with metal ions ,and is considered as a corrosion inhibitor, this work will be in favour of the study of protective corrosion.

  12. Leach-SX-EW copper revalorization from overburden of abandoned copper mine Cerovo, Eastern Serbia

    Directory of Open Access Journals (Sweden)

    Stevanović Z.

    2009-01-01

    Full Text Available Hydrometallurgical processes for copper revalorization from overburden of abandoned mine Cerovo in Eastern Serbia were studied. Paper contain results of percolation leaching tests, performed with acidic mine waters accumulated in the bottom of the former open pit, followed by solvent extraction (SX and electrowinning (EW processes on achieved copper pregnant leach solutions. Usage of accumulated waste waters was objected to minimizing the environmental hazard due to uncontrolled leaking of these waters in nearby creeks and rivers. Chemical composition of acidic mine waters used for leaching tests was: (g/dm3: Cu - 0.201; Fe - 0.095; Mn - 0.041; Zn - 0.026; Ni - 0.0004; pH value - 3.3. Copper content in overburden sample used for leaching tests was 0.21% from which 64% were oxide copper minerals. In scope of leaching tests were examined influence of leaching solution pH values and iron (III concentration on copper recovery. It was established that for 120 hours of leaching on pH=1.5 without oxidant agents, copper concentration in pregnant leach solutions enriched up to 1.08g/dm3 which was enough for copper extraction from solution with SX-EW treatment. As extraction reagent in SX circuit was used LIX-984N in a kerosene diluent. Cathode current density in electrowinning cell was 220Am-2 while electrolyte temperature was kept on 50±2oC. Produced cathode copper at the end of SX-EW process has purity of 99.95% Cu.

  13. Selective leaching process for the recovery of copper and zinc oxide from copper-containing dust.

    Science.gov (United States)

    Wu, Jun-Yi; Chang, Fang-Chih; Wang, H Paul; Tsai, Ming-Jer; Ko, Chun-Han; Chen, Chih-Cheng

    2015-01-01

    The purpose of this study was to develop a resource recovery procedure for recovering copper and zinc from dust produced by copper smelting furnaces during the manufacturing of copper-alloy wires. The concentrations of copper in copper-containing dust do not meet the regulation standards defined by the Taiwan Environmental Protection Administration; therefore, such waste is classified as hazardous. In this study, the percentages of zinc and copper in the dust samples were approximately 38.4% and 2.6%, respectively. To reduce environmental damage and recover metal resources for industrial reuse, acid leaching was used to recover metals from these inorganic wastes. In the first stage, 2 N of sulphuric acid was used to leach the dust, with pH values controlled at 2.0-3.0, and a solid-to-liquid ratio of 1:10. The results indicated that zinc extraction efficiency was higher than 95%. A selective acid leaching process was then used to recover the copper content of the residue after filtration. In the second stage, an additional 1 N of sulphuric acid was added to the suspension in the selective leaching process, and the pH value was controlled at 1.5-2.0. The reagent sodium hydroxide (2 N) was used as leachate at a pH greater than 7. A zinc hydroxide compound formed during the process and was recovered after drying. The yields for zinc and copper were 86.9-93.5% and 97.0-98.9%, respectively.

  14. Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The application of ultrasonic-electrolysis process for the removal of copper is studied.In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution.Thus increases metal deposition on the cathode surface.The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.

  15. Removal of copper from a copper sulphate solution using an ultrasonic-electrolysis process.

    Science.gov (United States)

    Farooq, Robina; Wang, Y; Shaukat, S F; Donaldson, J; Chaudhary, A J

    2002-07-01

    The application of ultrasonic-electrolysis process for the removal of copper is studied. In the ultrasonic field cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution. Thus increases metal deposition on the cathode surface. The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.

  16. Effect of ultrasound on the removal of copper from the model solutions for copper electrolysis process.

    Science.gov (United States)

    Farooq, Robina; Wang, Y; Lin, F; Shaukat, S F; Donaldson, J; Chouhdary, A J

    2002-07-01

    A novel combination of an ultrasonic field with electrolysis for the removal of copper is studied. In the ultrasonic field, cavitation acts as jets and agitates the solution and breaks the barrier layer between the cathode surface and the bulk of the solution, thus increases the metal deposition on the cathode surface. The results show that an ultrasonic field is successful for the removal of low copper concentrations in solution.

  17. Release of copper-amended particles from micronized copper-pressure-treated wood during mechanical abrasion

    OpenAIRE

    Civardi, Chiara; Schlagenhauf, Lukas; Kaiser, Jean-Pierre; Hirsch, Cordula; Mucchino, Claudio; Wichser, Adrian; Wick, Peter; Schwarze, Francis W. M. R.

    2016-01-01

    Background We investigated the particles released due to abrasion of wood surfaces pressure-treated with micronized copper azole (MCA) wood preservative and we gathered preliminary data on its in vitro cytotoxicity for lung cells. The data were compared with particles released after abrasion of untreated, water (0% MCA)-pressure-treated, chromated copper (CC)-pressure-treated wood, and varnished wood. Size, morphology, and composition of the released particles were analyzed. Results Our resul...

  18. Zirconium modified nickel-copper alloy

    Science.gov (United States)

    Whittenberger, J. D. (Inventor)

    1977-01-01

    An improved material for use in a catalytic reactor which reduces nitrogen oxide from internal combustion engines is in the form of a zirconium-modified, precipitation-strengthened nickel-copper alloy. This material has a nominal composition of Ni-30 Cu-0.2 Zr and is characterized by improved high temperature mechanical properties.

  19. Laser Additive Manufacturing Bulk Graphene Copper Nanocomposites.

    Science.gov (United States)

    Hu, Zengrong; Chen, Feng; Ling, Dong; Nian, Qiong; Parandoush, Pedram; Zhu, Xing; Shao, Zhuqiang; Cheng, Gary J

    2017-08-30

    The exceptional mechanical properties of graphene enable itself as ideal nanofiller to reinforce the metal matrix composites (MMCs). In this work, graphene copper (Gr-Cu) nanocomposites have been fabricated by laser additive manufacturing process. The transmission electron microscope (TEM), X-ray diffraction (XRD), and Raman spectroscopy were utilized to characterize the fabricated nanocomposites. The XRD, Raman spectrum, energy disperse spectroscopy (EDS) and TEM results demonstrate the feasibility of laser additive manufacturing of Gr-Cu nanocomposites. Microstructures were characterized by high resolution TEM (HRTEM) further reveal the interface between copper matrix and graphene. With addition of graphene, mechanical properties of the composites were significantly enhanced. Nanoindentation tests show that average modulus value and hardness of the composites are 118.9 GPa and 3 GPa respectively; a 17.6% and a 50% increase were achieved compared with pure copper, respectively. This work opens a new way to manufacture the figure strong copper based composites with ultra-strong mechanical property, and provides alternatives for applications in electrical and thermal conductors. © 2017 IOP Publishing Ltd.

  20. Placenta Copper Transport Proteins in Preeclampsia

    Science.gov (United States)

    Placental insufficiency underlying preeclampsia (PE) is associated with impaired placental angiogenesis. As copper (Cu) is essential to angiogenesis, we investigated differences in the expression of placental Cu transporters Menkes (ATP7A), Wilsons (ATP7B) and the Cu chaperone (CCS) for superoxide d...

  1. Antistatic Polycarbonate/Copper Oxide Composite

    Science.gov (United States)

    Kovich, Michael; Rowland, George R., Jr.

    2003-01-01

    A composite material consisting of polycarbonate filled with copper oxide has been found to be suitable as an antistatic material. This material was developed to satisfy a requirement for an antistatic material that has a mass density less than that of aluminum and that exhibits an acceptably low level of outgassing in a vacuum.

  2. Laser micro welding of copper and aluminum

    Science.gov (United States)

    Mys, Ihor; Schmidt, Michael

    2006-02-01

    Aluminum combines comparably good thermal and electrical properties with a low price and a low material weight. These properties make aluminum a promising alternative to copper for a large number of electronic applications, especially when manufacturing high volume components. However, a main obstacle for a wide use of this material is the lack of a reliable joining process for the interconnection of copper and aluminum. The reasons for this are a large misalignment in the physical properties and even more a poor metallurgical affinity of both materials that cause high crack sensitivity and the formation of brittle intermetallic phases during fusion welding. This paper presents investigations on laser micro welding of copper and aluminum with the objective to eliminate brittle intermetallic phases in the welding structure. For these purposes a combination of spot welding, a proper beam offset and special filler material are applied. The effect of silver, nickel and tin filler materials in the form of thin foils and coatings in a thickness range 3-100 μm has been investigated. Use of silver and tin filler materials yields to a considerable improvement of the static and dynamic mechanical stability of welded joints. The analysis of the weld microstructure shows that an application even of small amounts of suitable filler materials helps to avoid critical, very brittle intermetallic phases on the interface between copper and solidified melt in the welded joints.

  3. Microwave attenuation with composite of copper microwires

    Energy Technology Data Exchange (ETDEWEB)

    Gorriti, A.G.; Marin, P. [Instituto de Magnetismo Aplicado, (UCM-ADIF-CSIC) and Departamento de Fisica de Materiales (UCM). P.O. Box 155, Las Rozas, Madrid 28230 (Spain); Cortina, D. [Micromag S.L., Las Rozas, Madrid 28230 (Spain); Hernando, A., E-mail: antonio.hernando@adif.e [Instituto de Magnetismo Aplicado, (UCM-ADIF-CSIC) and Departamento de Fisica de Materiales (UCM). P.O. Box 155, Las Rozas, Madrid 28230 (Spain); Micromag S.L., Las Rozas, Madrid 28230 (Spain)

    2010-05-15

    It is shown that copper microwires composite media attenuates microwave reflection of metallic surfaces. We show how the distance to the metallic surface, as well as the length and volume fraction of microwires, determine the frequency of maximum absorption and the return loss level. Furthermore, we were able to fit the experimental results with a theoretical model based on Maxwell-Garnett mixing formula.

  4. Microvascular effects of copper deficiency in rats

    Energy Technology Data Exchange (ETDEWEB)

    Schuschke, D.A.; Saari, J.T.; Ackermann, D.M.; Miller, F.N. (Univ. of Louisville, KY (USA))

    1989-02-15

    We have studied the microcirculatory responses in copper deficient rats using the rat cremaster muscle preparation. Male Sprague-Dawley rats were fed either a copper supplemented diet (CuS, 5 ppm) or a copper deficient diet (CuD, O ppm) for five weeks prior to experimentation. The rats (240-300g) were anesthetized with pentobarbital and the cremaster (with intact nerve and blood supply) were spread in a tissue bath filled with krebs solution. In vivo television microscopy was used to observe the microcirculation. Fluorescein isothiocyanate tagged to bovine serum albumin (FITC-BSA) was injected i.a. 30 min prior to the start of experimentation. In the CuS animals photoactivation of the intravascular FITC-BSA caused significant platelet aggregation and reduction in red blood cell column diameter (RBCCD) by 30 min and stasis of flow by 60 min. In CuD animals there was no reduction in RBCCD and only minor platelet aggregation after 60 min of photoactivation. Topical administration of compound 48/80 (1.0 and 10.0 {mu}g/ml) induced a significantly greater macromolecular leakage (increased interstitial fluorescence of FITC-BSA) in the CuD animals than in the control, CuS animals. These results suggest that copper deficiency results in marked alterations of the regulatory mechanisms governing thrombosis and inflammation.

  5. CNGC Secured More Copper Reserves in 2011

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    <正>According to China Land and Resources Newspaper, the reporter learnt from the work- ing conference of China National Gold Group Corporation (CNGC) that the corporation has again achieved great achievements in terms of its reserve increase strategy in 2011. The corporation increased its reserves by 215 tons of gold, 370,000 tons of copper and 580,000 tons

  6. Dislocation Microstructures in Fatiqued Copper Polycrystals

    DEFF Research Database (Denmark)

    Winter, A.T.; Pedersen, Ole Bøcker; Rasmussen, K.V.

    1981-01-01

    Dislocation structures characteristic of persistent slip bands were observed in the interior of polycrystalline copper after fatigue. At low strain amplitudes, within the plateau on the cyclic stress-strain curve, only structures identical to those seen in single crystals were observed. This allows...

  7. Tunneling spectra of graphene on copper unraveled

    DEFF Research Database (Denmark)

    Zhang, Xin; Stradi, Daniele; Liu, Lei

    2016-01-01

    mechanisms, etc. The interpretation of the spectra can be complicated, however. Specifically for graphene grown on copper, there have been conflicting reports of tunneling spectra. A clear understanding of the mechanisms behind the variability is desired. In this work, we have revealed that the root cause...

  8. Electrokinetic remediation of copper mine tailings

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, H. K.; Rojo, A.; Ottosen, L. M.

    2009-07-01

    The heavy metal contamination from mining industry has become a growing problem both in chile and worldwide. This contamination includes large areas with soil pollution, contaminated rivers and continuous generation of mining waste deposits. The solid waste that will be analysed is mine tailings, which are the residual products after the flotation process in conventional sulphide copper mining. (Author)

  9. A Simulator for Copper Ore Leaching

    Energy Technology Data Exchange (ETDEWEB)

    Travis, B.

    1999-05-14

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Copper is a strategic metal and the nation needs a secure supply both for industrial use and military needs. However, demand is growing worldwide and is outstripping the ability of the mining industry to keep up. Improved recovery methods are critically needed to maintain the balance of supply and demand. The goal of any process design should be to increase the amount of copper recovered, control movement of acid and other environmentally harmful chemicals, and reduce energy requirements. To achieve these ends, several improvements in current technology are required, the most important of which is a better understanding of, and the ability to quantify, how fluids move through heterogeneous materials in a complex chemical environment. The goal of this project is create a new modeling capability that couples hydrology with copper leaching chemistry . once the model has been verified and validated, we can apply the model to specific problems associated with heap leaching (flow channeling due to non-uniformities in heap structure, precipitation/dissolution reactions, and bacterial action), to understand the causes of inefficiencies, and to design better recovery systems. We also intend to work with representatives of the copper mining industry to write a coordinated plan for further model development and application that will provide economic benefits to the industry and the nation.

  10. CopperCore 2.2.3

    NARCIS (Netherlands)

    Vogten, Hubert; Martens, Harrie; Koper, Rob

    2005-01-01

    Changes in this version: great number of bug fixes with regard to notifcation handling, allowed empty items in order to be more compatible with Reload, added QTI content type for CopperCore Service Integration, improved error handling, improved Clicc and fixed a bug regarding the else operation in a

  11. CopperCore 2.2

    NARCIS (Netherlands)

    Martens, Harrie; Vogten, Hubert; Koper, Rob

    2005-01-01

    Changes in this release: repackaged the source code classes, split coppercore archive packages in smaller packages, added a coppercore.ear archive for easy deployment of CopperCore on the application server, updated the build scripts for accommodating these changes, fixed some bugs.

  12. CopperCore 2.2

    NARCIS (Netherlands)

    Martens, Harrie; Vogten, Hubert; Koper, Rob

    2005-01-01

    Changes in this release: repackaged the source code classes, split coppercore archive packages in smaller packages, added a coppercore.ear archive for easy deployment of CopperCore on the application server, updated the build scripts for accommodating these changes, fixed some bugs.

  13. CopperCore 2.2.3

    NARCIS (Netherlands)

    Vogten, Hubert; Martens, Harrie; Koper, Rob

    2005-01-01

    Changes in this version: great number of bug fixes with regard to notifcation handling, allowed empty items in order to be more compatible with Reload, added QTI content type for CopperCore Service Integration, improved error handling, improved Clicc and fixed a bug regarding the else operation in a

  14. A Mathematical model of copper corrosion

    CERN Document Server

    Clarelli, Fabrizio; Natalini, Roberto

    2012-01-01

    A new partial differential model for monitoring and detecting copper corrosion products (mainly brochantite and cuprite) is proposed to provide predictive tools suitable for describing the evolution of damage induced on bronze specimens by sulfur dioxide (SO_2) pollution. This model is characterized by the movement of a double free boundary. Numerical simulations show a nice agreement with experimental result.

  15. Alternative Anode Reaction for Copper Electrowinning

    Energy Technology Data Exchange (ETDEWEB)

    2005-07-01

    This report describes a project funded by the Department of Energy, with additional funding from Bechtel National, to develop a copper electrowinning process with lower costs and lower emissions than the current process. This new process also includes more energy efficient production by using catalytic-surfaced anodes and a different electrochemical couple in the electrolyte, providing an alternative oxidation reaction that requires up to 50% less energy than is currently required to electrowin the same quantity of copper. This alternative anode reaction, which oxidizes ferric ions to ferrous, with subsequent reduction back to ferric using sulfur dioxide, was demonstrated to be technically and operationally feasible. However, pure sulfur dioxide was determined to be prohibitively expensive and use of a sulfur burner, producing 12% SO{sub 2}, was deemed a viable alternative. This alternate, sulfur-burning process requires a sulfur burner, waste heat boiler, quench tower, and reaction towers. The electrolyte containing absorbed SO{sub 2} passes through activated carbon to regenerate the ferrous ion. Because this reaction produces sulfuric acid, excess acid removal by ion exchange is necessary and produces a low concentration acid suitable for leaching oxide copper minerals. If sulfide minerals are to be leached or the acid unneeded on site, hydrogen was demonstrated to be a potential reductant. Preliminary economics indicate that the process would only be viable if significant credits could be realized for electrical power produced by the sulfur burner and for acid if used for leaching of oxidized copper minerals on site.

  16. Art of Wrought Copper in Turkey

    Directory of Open Access Journals (Sweden)

    Nuran KAYABAŞI

    2014-07-01

    Full Text Available Among the handicraft, art of being a coppersmith has been occurred intensively in the past. The fast developing socio - economic structure diminished the value and the place of the copper vessels. Heavy and beautiful vessels made by beating left their places to thin, light aluminum, pl astic, glass and steel vessels made by machinery. The demand for copper is diminished. Therefore being a coppersmith has become less and less important every day. However, in the last few years, copper vessels becoming a touristic souvenir became a source of hope for the traditional coppersmith art to live on. Copperworking is applied in our country in some regions and there are people who live off it. Souvenirs, daily used vessels, and requirements of the rural areas are produced in centers such as İstanb ul, Ankara, Tokat, Çorum, Erzincan, Diyarbakır, Kahramanmaraş, Gaziantep, Bursa, Kastamonu, Çankırı, Giresun and Trabzon. The situation of being a coppersmith in Turkey is explained, examples are given from souvenir copper items produced in Ankara, and sug gestions are made to keep this craft alive.

  17. Copper Recovery from Yulong Complex Copper Oxide Ore by Flotation and Magnetic Separation

    Science.gov (United States)

    Han, Junwei; Xiao, Jun; Qin, Wenqing; Chen, Daixiong; Liu, Wei

    2017-09-01

    A combined process of flotation and high-gradient magnetic separation was proposed to utilize Yulong complex copper oxide ore. The effects of particle size, activators, Na2S dosage, LA (a mixture of ammonium sulfate and ethylenediamine) dosage, activating time, collectors, COC (a combination collector of modified hydroxyl oxime acid and xanthate) dosage, and magnetic intensity on the copper recovery were investigated. The results showed that 74.08% Cu was recovered by flotation, while the average grade of the copper concentrates was 21.68%. Another 17.34% Cu was further recovered from the flotation tailing by magnetic separation at 0.8 T. The cumulative recovery of copper reached 91.42%. The modifier LA played a positive role in facilitating the sulfidation of copper oxide with Na2S, and the combined collector COC was better than other collectors for the copper flotation. This technology has been successfully applied to industrial production, and the results are consistent with the laboratory data.

  18. Copper recovery and cyanide oxidation by electrowinning from a spent copper-cyanide electroplating electrolyte.

    Science.gov (United States)

    Dutra, A J B; Rocha, G P; Pombo, F R

    2008-04-01

    Copper-cyanide bleed streams arise from contaminated baths from industrial electroplating processes due to the buildup of impurities during continuous operation. These streams present an elevated concentration of carbonate, cyanide and copper, constituting a heavy hazard, which has to be treated for cyanide destruction and heavy metals removal, according to the local environmental laws. In the Brazilian Mint, bleed streams are treated with sodium hypochlorite, to destroy cyanide and precipitate copper hydroxide, a solid hazardous waste that has to be disposed properly in a landfill or treated for metal recovery. In this paper, a laboratory-scale electrolytic cell was developed to remove the copper from the bleed stream of the electroplating unit of the Brazilian Mint, permitting its reutilization in the plant and decreasing the amount of sludge to waste. Under favorable conditions copper recoveries around 99.9% were achieved, with an energy consumption of about 11 kWh/kg, after a 5-h electrolysis of a bath containing copper and total cyanide concentrations of 26 and 27 g/L, respectively. Additionally, a substantial reduction of the cyanide concentration was also achieved, decreasing the pollution load and final treatment costs.

  19. Preparation of graphite dispersed copper composite with intruding graphite particles in copper plate

    Science.gov (United States)

    Noor, Abdul Muizz Mohd; Ishikawa, Yoshikazu; Yokoyama, Seiji

    2017-01-01

    In this study, it was attempted that copper-graphite composite was prepared locally on the surface of a copper plate with using a spot welding machine. Experiments were carried out with changing the compressive load, the repetition number of the compression and the electrical current in order to study the effect of them on carbon content and Vickers hardness on the copper plate surface. When the graphite was pushed into copper plate only with the compressive load, the composite was mainly hardened by the work hardening. The Vickers hardness increased linearly with an increase in the carbon content. When an electrical current was energized through the composite at the compression, the copper around the graphite particles were heated to the temperature above approximately 2100 K and melted. The graphite particles partially or entirely dissolved into the melt. The graphite particles were precipitated from the melt under solidification. In addition, this high temperature caused the improvement of wetting of copper to graphite. This high temperature caused the annealing, and reduced the Vickers hardness. Even in this case, the Vickers hardness increased with an increase in the carbon content. This resulted from the dispersion hardening.

  20. Simultaneous Platinum and Copper Ion Attachment to a Human Copper Chaperone Protein

    Science.gov (United States)

    Hodak, Miroslav; Cvitkovic, John; Yu, Corey; Dmitriev, Oleg; Kaminski, George; Bernholc, Jerry

    2015-03-01

    Cisplatin is a potent anti-cancer drug based on a platinum ion. However, its effectiveness is decreased by cellular resistance, which involves cisplatin attaching to copper transport proteins. One of such proteins is Atox1, where cisplatin attaches to the copper binding site. Surprisingly, it was shown that both cisplatin and copper can attach to Atox1 at the same time. To study this double metal ion attachment, we use the KS/FD DFT method, which combines Kohn-Sham DFT with frozen-density DFT to achieve efficient quantum-mechanical description of explicit solvent. Calculations have so far investigated copper ion attachment to CXXC motifs present in Atox1. The addition of the platinum ion and the competition between the two metals is currently being studied. These calculations start from a molecular mechanics (MM) structural model, in which glutathione groups provide additional ligands to the Pt ion. Our goals are to identify possible Cu-Pt structures and to determine whether copper/platinum attachment is competitive, independent, or cooperative. Results will be compared to the 1H, N1 5 -HSQC NMR experiments, in which binding of copper and cisplatin to Atox1 produces distinct secondary chemical shift signatures, allowing for kinetic studies of simultaneous metal binding.

  1. Investigation on the production of copper nitride (copper azide) thin films and their nanostructures

    Science.gov (United States)

    Lotfi-Kaljahi, Amir; Savaloni, Hadi

    2013-01-01

    Copper thin films of 80-nm thickness were deposited on glass substrate using electron beam deposition at two different deposition angles of 0° and 40°, and they were post-annealed under flow of nitrogen at different temperatures. The structure of the films was analyzed using X-ray diffraction, atomic force microscope, and scanning electron microscope. Investigation on the copper nitride phase formation showed that this phase was not formed in the samples produced at 0°, while those prepared at oblique angle of 40° clearly showed the formation of copper azide phase. This is related to the porosity of the film structure, hence increased surface area for the reaction of nitrogen with copper atoms. Therefore, this is a simple method for preparation of copper nitride films that are not usually formed due to low reactivity of copper (as transition metal) with nitrogen. The results showed that the crystallite size (coherently diffracting domains), grain size, and surface roughness increase with annealing temperature.

  2. Rapid copper acquisition by developing murine mesothelioma: decreasing bioavailable copper slows tumor growth, normalizes vessels and promotes T cell infiltration.

    Directory of Open Access Journals (Sweden)

    Andrew Crowe

    Full Text Available Copper, an essential trace element acquired through nutrition, is an important co-factor for pro-angiogenic factors including vascular endothelial growth factor (VEGF. Decreasing bioavailable copper has been used as an anti-angiogenic and anti-cancer strategy with promising results. However, the role of copper and its potential as a therapy in mesothelioma is not yet well understood. Therefore, we monitored copper levels in progressing murine mesothelioma tumors and analyzed the effects of lowering bioavailable copper. Copper levels in tumors and organs were assayed using atomic absorption spectrophotometry. Mesothelioma tumors rapidly sequestered copper at early stages of development, the copper was then dispersed throughout growing tumor tissues. These data imply that copper uptake may play an important role in early tumor development. Lowering bioavailable copper using the copper chelators, penicillamine, trientine or tetrathiomolybdate, slowed in vivo mesothelioma growth but did not provide any cures similar to using cisplatin chemotherapy or anti-VEGF receptor antibody therapy. The impact of copper lowering on tumor blood vessels and tumor infiltrating T cells was measured using flow cytometry and confocal microscopy. Copper lowering was associated with reduced tumor vessel diameter, reduced endothelial cell proliferation (reduced Ki67 expression and lower surface ICAM/CD54 expression implying reduced endothelial cell activation, in a process similar to endothelial normalization. Copper lowering was also associated with a CD4(+ T cell infiltrate. In conclusion, these data suggest copper lowering is a potentially useful anti-mesothelioma treatment strategy that slows tumor growth to provide a window of opportunity for inclusion of other treatment modalities to improve patient outcomes.

  3. Low Hepatic Tissue Copper in Pediatric Nonalcoholic Fatty Liver Disease.

    Science.gov (United States)

    Mendoza, Michael; Caltharp, Shelley; Song, Ming; Collin, Lindsay; Konomi, Juna V; McClain, Craig J; Vos, Miriam B

    2017-07-01

    Animal models and studies in adults have demonstrated that copper restriction increases severity of liver injury in nonalcoholic fatty liver disease (NAFLD). This has not been studied in children. We aimed to determine if lower tissue copper is associated with increased NAFLD severity in children. This was a retrospective study of pediatric patients who had a liver biopsy including a hepatic copper quantitation. The primary outcome compared hepatic copper concentration in NAFLD versus non-NAFLD. Secondary outcomes compared hepatic copper levels against steatosis, fibrosis, lobular inflammation, balloon degeneration, and NAFLD activity score (NAS). The study analysis included 150 pediatric subjects (102 with NAFLD and 48 non-NAFLD). After adjusting for age, body mass index z score, gamma glutamyl transferase, alanine aminotransferase, and total bilirubin, NAFLD subjects had lower levels of hepatic copper than non-NAFLD (P = 0.005). In addition, tissue copper concentration decreased as steatosis severity increased (P < 0.001). Copper levels were not associated with degree of fibrosis, lobular inflammation, portal inflammation, or balloon degeneration. In this cohort of pediatric subjects with NAFLD, we observed decreased tissue copper levels in subjects with NAFLD when compared with non-NAFLD subjects. In addition, tissue copper levels were lower in subjects with nonalcoholic steatohepatitis, a more severe form of the disease, when compared with steatosis alone. Further studies are needed to explore the relationship between copper levels and NAFLD progression.

  4. The many "faces" of copper in medicine and treatment.

    Science.gov (United States)

    Hordyjewska, Anna; Popiołek, Łukasz; Kocot, Joanna

    2014-08-01

    Copper (Cu) is an essential microelement found in all living organisms with the unique ability to adopt two different redox states-in the oxidized (Cu(2+)) and reduced (Cu(+)). It is required for survival and serves as an important catalytic cofactor in redox chemistry for proteins that carry out fundamental biological functions, important in growth and development. The deficit of copper can result in impaired energy production, abnormal glucose and cholesterol metabolism, increased oxidative damage, increased tissue iron (Fe) accrual, altered structure and function of circulating blood and immune cells, abnormal neuropeptides synthesis and processing, aberrant cardiac electrophysiology, impaired myocardial contractility, and persistent effects on the neurobehavioral and the immune system. Increased copper level has been found in several disorders like e.g.: Wilson's disease or Menke's disease. New findings with the great potential for impact in medicine include the use of copper-lowering therapy for antiangiogenesis, antifibrotic and anti-inflammatory purposes. The role of copper in formation of amyloid plaques in Alzheimer's disease, and successful treatment of this disorder in rodent model by copper chelating are also of interest. In this work we will try to describe essential aspects of copper in chosen diseases. We will represent the evidence available on adverse effect derived from copper deficiency and copper excess. We will try to review also the copper biomarkers (chosen enzymes) that help reflect the level of copper in the body.

  5. Metal-metal bonding using silver/copper nanoparticles

    Science.gov (United States)

    Kobayashi, Y.; Maeda, T.; Yasuda, Y.; Morita, T.

    2016-08-01

    A method for producing nanoparticles composed of silver and copper and a metal-metal bonding technique using the silver/copper nanoparticles are proposed. The method consists of three steps. First, copper oxide nanoparticles are produced by mixing Cu(NO3)2 aqueous solution and NaOH aqueous solution. Second, copper metal nanoparticles are fabricated by reducing the copper oxide nanoparticles with hydrazine in the presence of poly(vinylpyrrolidone) (PVP). Third, silver/copper nanoparticles are synthesized by reducing Ag+ ions with hydrazine in the presence of the copper metal nanoparticles. Initial concentrations in the final silver/copper particle colloid, composed of 0.0075 M Cu2+, 0.0025 M Ag+, 1.0 g/L PVP, and 0.6 M hydrazine, produced silver/copper nanoparticles with an average size of 49 nm and a crystal size of 16.8 nm. Discs of copper metal were successfully bonded by the silver/copper nanoparticles under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in not only hydrogen gas but also nitrogen gas. The shear force required to separate the bonded discs was 22.3 MPa for the hydrogen gas annealing and 14.9 MPa for the nitrogen gas annealing (namely, 66.8 % of that for hydrogen gas annealing).

  6. Ceruloplasmin as a marker of occupational copper exposure.

    Science.gov (United States)

    Saha, Asim; Karnik, Anil; Sathawara, Natubhai; Kulkarni, Pradip; Singh, Vedprakash

    2008-05-01

    Estimation of serum copper to indicate copper status in the human system in the context of moderate chronic occupational copper exposure requires a sophisticated and expensive method. Hence, a search for a suitable marker has been made and few studies have found potential in serum ceruloplasmin. In this context, the present study was initiated to explore whether ceruloplasmin could serve as a predictor of occupational copper exposure. An interviewer-administered questionnaire survey (personal, occupational and health-related information) was undertaken involving 185 employees of a copper handling industry. Serum alkaline phosphatase, serum glutamic pyruvic transaminase (SGPT), serum ceruloplasmin and serum copper were estimated in all the subjects. Multivariate analysis was undertaken using a linear regression model to understand the contribution of serum copper on serum ceruloplasmin values adjusting for the role of other confounders. Serum copper and serum ceruloplasmin values were found to have a statistically significant positive correlation (R=0.169, adjusted R(2)=0.024) after adjustment for other predictors like age, nature of job (department), job duration, smoking, serum alkaline phosphatase and SGPT. This study concludes that the serum ceruloplasmin level can act as a reliable indicator of copper status in the human body following copper exposure in cases of chronic moderate occupational exposure to copper.

  7. Bacterial leaching of discarded copper ores from Yongping, China

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The elementary and phase analysis of discarded copper ores from Yongping of China has been performed. The experiments of extracting copper from the discarded copper ores were done with the mixed bacteria obtained through a series of enrichment,separation, domestication and combination tests. The results show that in the process of bioleaching, the pH value rises at first and drops gradually. The Eh value keeps rising along with the time and the appropriate Eh value varying between 750 and 800 mV will benefit the bioleaching copper. The high concentration of ferric ions is detrimental to the bioleaching copper. The results of bioleaching copper are good. That is, the copper recovery is 31.8% after 27 days.

  8. Adsorption of 2-mercaptobenzothiazole on copper surface from phosphate solutions

    Science.gov (United States)

    Kazansky, L. P.; Selyaninov, I. A.; Kuznetsov, Yu. I.

    2012-07-01

    Analysis of the electrochemical and XPS results has shown that adsorption of 2-mercaptobenzothiazole (MBT) on copper electrodes in neutral phosphate solutions proceeds through the formation of the chemical bonds by copper (I) cations with exo-sulfur and nitrogen atoms. A protection layer formed of Cu(I)MBT complex prevents precipitation of copper (II) phosphate on a copper surface. The thickness of the surface film consisting of a complex [Cu(I)MBT]n (having probably polymeric nature), where MBT acts as at least three-dentate ligand, increases depending on the exposure time, reaching 8-9 nm after immersing for 12 h in test solution. Even in a case of the preliminary formation of copper (II) phosphate on the copper electrode at the anodic potential addition of small amounts of MBT results in complete removal of copper (II) phosphate from the surface.

  9. Mitochondrial dysfunction in neurodegenerative diseases associated with copper imbalance.

    Science.gov (United States)

    Rossi, Luisa; Lombardo, Marco F; Ciriolo, Maria R; Rotilio, Giuseppe

    2004-03-01

    Copper is an essential transition metal ion for the function of key metabolic enzymes, but its uncontrolled redox reactivity is source of reactive oxygen species. Therefore a network of transporters strictly controls the trafficking of copper in living systems. Deficit, excess, or aberrant coordination of copper are conditions that may be detrimental, especially for neuronal cells, which are particularly sensitive to oxidative stress. Indeed, the genetic disturbances of copper homeostasis, Menkes' and Wilson's diseases, are associated with neurodegeneration. Furthermore, copper interacts with the proteins that are the hallmarks of neurodegenerative disorders, such as Alzheimer's disease, Parkinson's disease, prion diseases, and familial amyotrophic lateral sclerosis. In all cases, copper-mediated oxidative stress is linked to mitochondrial dysfunction, which is a common feature of neurodegeneration. In particular we recently demonstrated that in copper deficiency, mitochondrial function is impaired due to decreased activity of cytochrome c oxidase, leading to production of reactive oxygen species, which in turn triggers mitochondria-mediated apoptotic neurodegeneration.

  10. Evolution of a Heavy Metal Homeostasis/Resistance Island Reflects Increasing Copper Stress in Enterobacteria

    OpenAIRE

    Staehlin, Benjamin M; Gibbons, John G.; Rokas, Antonis; O'Halloran, Thomas V.; Slot, Jason C.

    2016-01-01

    Copper homeostasis in bacteria is challenged by periodic elevation of copper levels in the environment, arising from both natural sources and human inputs. Several mechanisms have evolved to efflux copper from bacterial cells, including the cus (copper sensing copper efflux system), and pco (plasmid-borne copper resistance system) systems. The genes belonging to these two systems can be physically clustered in a Copper Homeostasis and Silver Resistance Island (CHASRI) on both plasmids and chr...

  11. Synthetic, spectral and solution studies on imidazolate-bridged copper(II)-copper(II) and copper(II)-zinc(II) complexes

    Indian Academy of Sciences (India)

    Subodh Kumar; R N Patel; P V Khadikar; K B Pandeya

    2001-02-01

    Synthesis, spectral and solution studies on 2-ethyl imidazolate-bridged (2-EtIm) homo-binuclear copper(II)-copper(II) and hetero-binuclear copper(II)-zinc(II) homologue are described. Magnetic moment values of homo-binuclear complexes indicate that the imidazolate group can mediate antiferromagnetic interactions. Optical spectra of hetero-binuclear complex at varying H values suggest that the imidazolate-bridged complex is stable over the H-range 7 15-10 0.

  12. Urinary Copper Elevation in a Mouse Model of Wilson's Disease Is a Regulated Process to Specifically Decrease the Hepatic Copper Load

    OpenAIRE

    Gray, Lawrence W.; Fangyu Peng; Molloy, Shannon A.; Pendyala, Venkata S.; Abigael Muchenditsi; Otto Muzik; Jaekwon Lee; Kaplan, Jack H.; Svetlana Lutsenko

    2012-01-01

    Body copper homeostasis is regulated by the liver, which removes excess copper via bile. In Wilson's disease (WD), this function is disrupted due to inactivation of the copper transporter ATP7B resulting in hepatic copper overload. High urinary copper is a diagnostic feature of WD linked to liver malfunction; the mechanism behind urinary copper elevation is not fully understood. Using Positron Emission Tomography-Computed Tomography (PET-CT) imaging of live Atp7b(-/-) mice at different stages...

  13. Gastrointestinal and in vitro release of copper, cadmium, indium, mercury and zinc from conventional and copper-rich amalgams

    Energy Technology Data Exchange (ETDEWEB)

    Brune, D. (NIOM, Scandinavian Institute of Dental Materials, Oslo, Norway); Gjerdet, N. (Department of Dental Materials, School of Dentistry, Bergen, Norway); Paulsen, G. (Denatal Faculty, University of Oslo, Norway)

    1983-01-01

    Particles of a conventional lathe-cut, a spherical non-gamma 2 and a copper amalgam have been gastrointestinally administered to rats for the purpose of evaluation of the dissolution resistance. The animals were sacrificed after 20 hrs. The contents of copper, cadmium, indium, mercury and zinc in kidney, liver, lung or blood were measured using nuclear tracer techniques. From a copper amalgam an extreme release of copper was demonstrated. This study simulates the clinical conditions of elemental release from swallowed amalgam particles after amalgam insertion or after removal of old amalgam fillings. Specimens of the same types of amalgams were also exposed to artificial saliva for a period of 10 days. The amounts of copper and mercury released were measured with flame and flameless atomic absorption spectrophotometry respectively. The levels of copper and mercury released from the copper amalgam were approximately 50 times those of the two other amalgam types studied.

  14. A Study of the Optimal Model of the Flotation Kinetics of Copper Slag from Copper Mine BOR

    Science.gov (United States)

    Stanojlović, Rodoljub D.; Sokolović, Jovica M.

    2014-10-01

    In this study the effect of mixtures of copper slag and flotation tailings from copper mine Bor, Serbia on the flotation results of copper recovery and flotation kinetics parameters in a batch flotation cell has been investigated. By simultaneous adding old flotation tailings in the ball mill at the rate of 9%, it is possible to increase copper recovery for about 20%. These results are compared with obtained copper recovery of pure copper slag. The results of batch flotation test were fitted by MatLab software for modeling the first-order flotation kinetics in order to determine kinetics parameters and define an optimal model of the flotation kinetics. Six kinetic models are tested on the batch flotation copper recovery against flotation time. All models showed good correlation, however the modified Kelsall model provided the best fit.

  15. Construction of a high efficiency copper adsorption bacterial system via peptide display and its application on copper dye polluted wastewater.

    Science.gov (United States)

    Maruthamuthu, Murali Kannan; Nadarajan, Saravanan Prabhu; Ganesh, Irisappan; Ravikumar, Sambandam; Yun, Hyungdon; Yoo, Ik-Keun; Hong, Soon Ho

    2015-11-01

    For the construction of an efficient copper waste treatment system, a cell surface display strategy was employed. The copper adsorption ability of recombinant bacterial strains displaying three different copper binding peptides were evaluated in LB Luria-Bertani medium (LB), artificial wastewater, and copper phthalocyanine containing textile dye industry wastewater samples. Structural characteristics of the three peptides were also analyzed by similarity-based structure modeling. The best binding peptide was chosen for the construction of a dimeric peptide display and the adsorption ability of the monomeric and dimeric peptide displayed strains were compared. The dimeric peptide displayed strain showed superior copper adsorption in all three tested conditions (LB, artificial wastewater, and textile dye industry wastewater). When the strains were exposed to copper phthalocyanine dye polluted wastewater, the dimeric peptide display [543.27 µmol/g DCW dry cell weight (DCW)] showed higher adsorption of copper when compared with the monomeric strains (243.53 µmol/g DCW).

  16. Role of the human high-affinity copper transporter in copper homeostasis regulation and cisplatin sensitivity in cancer chemotherapy.

    Science.gov (United States)

    Kuo, Macus Tien; Fu, Siqing; Savaraj, Niramol; Chen, Helen H W

    2012-09-15

    The high-affinity copper transporter (Ctr1; SCLC31A1) plays an important role in regulating copper homeostasis because copper is an essential micronutrient and copper deficiency is detrimental to many important cellular functions, but excess copper is toxic. Recent research has revealed that human copper homeostasis is tightly controlled by interregulatory circuitry involving copper, Sp1, and human (hCtr1). This circuitry uses Sp1 transcription factor as a copper sensor in modulating hCtr1 expression, which in turn controls cellular copper and Sp1 levels in a 3-way mutual regulatory loop. Posttranslational regulation of hCtr1 expression by copper stresses has also been described in the literature. Because hCtr1 can also transport platinum drugs, this finding underscores the important role of hCtr1 in platinum-drug sensitivity in cancer chemotherapy. Consistent with this notion is the finding that elevated hCtr1 expression was associated with favorable treatment outcomes in cisplatin-based cancer chemotherapy. Moreover, cultured cell studies showed that elevated hCtr1 expression can be induced by depleting cellular copper levels, resulting in enhanced cisplatin uptake and its cell-killing activity. A phase I clinical trial using a combination of trientine (a copper chelator) and carboplatin has been carried out with encouraging results. This review discusses new insights into the role of hCtr1 in regulating copper homeostasis and explains how modulating cellular copper availability could influence treatment efficacy in platinum-based cancer chemotherapy through hCtr1 regulation.

  17. Copper electrodeposition from a copper acid baths in the presence of PEG and NaCl

    Directory of Open Access Journals (Sweden)

    V. D. JOVIC

    2001-12-01

    Full Text Available Copper electrodeposition from copper acid solutions containing PEG and NaCl has been investigated onto Cu(111, Cu(100 and polycrystalline copper electrodes using polarization and EIS measurements. The adsorption of sulphate and chloride anions, and PEG molecules, was investigated onto Cu(111 and Cu(100 by cyclic voltammetry and differential capacitance measurements. Differential capacitance vs. potential curves recorded onto Cu(100 in solutions containing 0.1 M H2SO4, 0.1 M H2SO4 + 10-3 M PEG and 0.1 M H2SO4 + 10-3 M PEG + 10-3 M NaCl confirm that “specific adsorption” of PEG molecules occurs in the absence of NaCl in the solution, in the potential region of copper electrodeposition, e.g., between –1.0 V and –0.5 V vs. SSE. In the presence of chloride ions, the adsorption of PEG molecules is suppressed and there is no evidence of adsorption of neutral PEG molecules. It is shown that hysteresis, appearing on the polarization curves of copper electrodeposition, is not a consequence of competition between inhibition provided by the Cl-PEG/Cu2+/Cu+/Cu interface and the catalytic effects of Cl-MPSA/Cu2+/Cu+/Cu interaction, because hysteresis is present in the solution containing only PEG and NaCl, e.g., in the absence of MPSA. EIS measurements confirm the simultaneous occurrence of two processes during copper electrodeposition: deposition of copper by discharge of Cu2+ ions and “specific adsorption” and discharge of some heavily charged species, most probably containing Cu, PEG and Cl.

  18. Immobilization of copper flotation waste using red mud and clinoptilolite.

    Science.gov (United States)

    Coruh, Semra

    2008-10-01

    The flash smelting process has been used in the copper industry for a number of years and has replaced most of the reverberatory applications, known as conventional copper smelting processes. Copper smelters produce large amounts of copper slag or copper flotation waste and the dumping of these quantities of copper slag causes economic, environmental and space problems. The aim of this study was to perform a laboratory investigation to assess the feasibility of immobilizing the heavy metals contained in copper flotation waste. For this purpose, samples of copper flotation waste were immobilized with relatively small proportions of red mud and large proportions of clinoptilolite. The results of laboratory leaching demonstrate that addition of red mud and clinoptilolite to the copper flotation waste drastically reduced the heavy metal content in the effluent and the red mud performed better than clinoptilolite. This study also compared the leaching behaviour of metals in copper flotation waste by short-time extraction tests such as the toxicity characteristic leaching procedure (TCLP), deionized water (DI) and field leach test (FLT). The results of leach tests showed that the results of the FLT and DI methods were close and generally lower than those of the TCLP methods.

  19. Isolation and characterization of bacteria resistant to metallic copper surfaces.

    Science.gov (United States)

    Santo, Christophe Espírito; Morais, Paula Vasconcelos; Grass, Gregor

    2010-03-01

    Metallic copper alloys have recently attracted attention as a new antimicrobial weapon for areas where surface hygiene is paramount. Currently it is not understood on a molecular level how metallic copper kills microbes, but previous studies have demonstrated that a wide variety of bacteria, including Escherichia coli, Staphylococcus aureus, and Clostridium difficile, are inactivated within minutes or a few hours of exposure. In this study, we show that bacteria isolated from copper alloy coins comprise strains that are especially resistant against the toxic properties exerted by dry metallic copper surfaces. The most resistant of 294 isolates were Gram-positive staphylococci and micrococci, Kocuria palustris, and Brachybacterium conglomeratum but also included the proteobacterial species Sphingomonas panni and Pseudomonas oleovorans. Cells of some of these bacterial strains survived on copper surfaces for 48 h or more. Remarkably, when these dry-surface-resistant strains were exposed to moist copper surfaces, resistance levels were close to those of control strains and MICs for copper ions were at or below control strain levels. This suggests that mechanisms conferring resistance against dry metallic copper surfaces in these newly isolated bacterial strains are different from well-characterized copper ion detoxification systems. Furthermore, staphylococci on coins did not exhibit increased levels of resistance to antibiotics, arguing against coselection with copper surface resistance traits.

  20. Influence of copper minerals on cyanide leaching of gold

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The paper thermodynamically examined the behavior of various copper minerals in cyanide solu-tions and investigated the influence of copper minerals on cyanide leaching of gold. In elucidating the influence of copper minerals on cyanide leaching of gold, copper minerals were classified into two types according to their solubility in cyanide solutions by proposing two concepts, cyaniding easily soluble copper (ECu) and cyaniding insoluble copper. The former involves copper occurrence in metal, oxides and secondary sulfides, and the latter refers mainly to primary sulfides. Experimental results show that not all the total copper in an ore affected cyanide leaching of gold, while cyaniding easily soluble copper turns out to be the decisive factor that interferes with gold cyanidation by causing decrease in gold cyanidation recovery and increase in cyanide consumption. When cyaniding easily soluble copper content (wE(Cu)) lies in the range of 0-0.25%, it linearly affects gold cyanidation recovery (R) as well as cyanide consumption (mc). The regression equations have been worked out to be R(%)=94.177 5-142.735 7 wE(Cu) with a correlation coefficient of -0.902 and mc=5.590 7+33.572 9 wE(Cu) with a correlation coefficient of 0.945, respectively.

  1. Copper as a key regulator of cell signalling pathways.

    Science.gov (United States)

    Grubman, Alexandra; White, Anthony R

    2014-05-22

    Copper is an essential element in many biological processes. The critical functions associated with copper have resulted from evolutionary harnessing of its potent redox activity. This same property also places copper in a unique role as a key modulator of cell signal transduction pathways. These pathways are the complex sequence of molecular interactions that drive all cellular mechanisms and are often associated with the interplay of key enzymes including kinases and phosphatases but also including intracellular changes in pools of smaller molecules. A growing body of evidence is beginning to delineate the how, when and where of copper-mediated control over cell signal transduction. This has been driven by research demonstrating critical changes to copper homeostasis in many disorders including cancer and neurodegeneration and therapeutic potential through control of disease-associated cell signalling changes by modulation of copper-protein interactions. This timely review brings together for the first time the diverse actions of copper as a key regulator of cell signalling pathways and discusses the potential strategies for controlling disease-associated signalling processes using copper modulators. It is hoped that this review will provide a valuable insight into copper as a key signal regulator and stimulate further research to promote our understanding of copper in disease and therapy.

  2. Copper Tolerance and Biosorption of Saccharomyces cerevisiae during Alcoholic Fermentation.

    Science.gov (United States)

    Sun, Xiang-Yu; Zhao, Yu; Liu, Ling-Ling; Jia, Bo; Zhao, Fang; Huang, Wei-Dong; Zhan, Ji-Cheng

    2015-01-01

    At high levels, copper in grape mash can inhibit yeast activity and cause stuck fermentations. Wine yeast has limited tolerance of copper and can reduce copper levels in wine during fermentation. This study aimed to understand copper tolerance of wine yeast and establish the mechanism by which yeast decreases copper in the must during fermentation. Three strains of Saccharomyces cerevisiae (lab selected strain BH8 and industrial strains AWRI R2 and Freddo) and a simple model fermentation system containing 0 to 1.50 mM Cu2+ were used. ICP-AES determined Cu ion concentration in the must decreasing differently by strains and initial copper levels during fermentation. Fermentation performance was heavily inhibited under copper stress, paralleled a decrease in viable cell numbers. Strain BH8 showed higher copper-tolerance than strain AWRI R2 and higher adsorption than Freddo. Yeast cell surface depression and intracellular structure deformation after copper treatment were observed by scanning electron microscopy and transmission electron microscopy; electronic differential system detected higher surface Cu and no intracellular Cu on 1.50 mM copper treated yeast cells. It is most probably that surface adsorption dominated the biosorption process of Cu2+ for strain BH8, with saturation being accomplished in 24 h. This study demonstrated that Saccharomyces cerevisiae strain BH8 has good tolerance and adsorption of Cu, and reduces Cu2+ concentrations during fermentation in simple model system mainly through surface adsorption. The results indicate that the strain selected from China's stress-tolerant wine grape is copper tolerant and can reduce copper in must when fermenting in a copper rich simple model system, and provided information for studies on mechanisms of heavy metal stress.

  3. Differential cytotoxicity of copper ferrite nanoparticles in different human cells.

    Science.gov (United States)

    Ahmad, Javed; Alhadlaq, Hisham A; Alshamsan, Aws; Siddiqui, Maqsood A; Saquib, Quaiser; Khan, Shams T; Wahab, Rizwan; Al-Khedhairy, Abdulaziz A; Musarrat, Javed; Akhtar, Mohd Javed; Ahamed, Maqusood

    2016-10-01

    Copper ferrite nanoparticles (NPs) have the potential to be applied in biomedical fields such as cell labeling and hyperthermia. However, there is a lack of information concerning the toxicity of copper ferrite NPs. We explored the cytotoxic potential of copper ferrite NPs in human lung (A549) and liver (HepG2) cells. Copper ferrite NPs were crystalline and almost spherically shaped with an average diameter of 35 nm. Copper ferrite NPs induced dose-dependent cytotoxicity in both types of cells, evident by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide and neutral red uptake assays. However, we observed a quite different susceptibility in the two kinds of cells regarding toxicity of copper ferrite NPs. Particularly, A549 cells showed higher susceptibility against copper ferrite NP exposure than those of HepG2 cells. Loss of mitochondrial membrane potential due to copper ferrite NP exposure was observed. The mRNA level as well as activity of caspase-3 enzyme was higher in cells exposed to copper ferrite NPs. Cellular redox status was disturbed as indicated by induction of reactive oxygen species (oxidant) generation and depletion of the glutathione (antioxidant) level. Moreover, cytotoxicity induced by copper ferrite NPs was efficiently prevented by N-acetylcysteine treatment, which suggests that reactive oxygen species generation might be one of the possible mechanisms of cytotoxicity caused by copper ferrite NPs. To the best of our knowledge, this is the first report showing the cytotoxic potential of copper ferrite NPs in human cells. This study warrants further investigation to explore the mechanisms of differential toxicity of copper ferrite NPs in different types of cells. Copyright © 2016 John Wiley & Sons, Ltd.

  4. Copper Tolerance and Biosorption of Saccharomyces cerevisiae during Alcoholic Fermentation

    Science.gov (United States)

    Liu, Ling-ling; Jia, Bo; Zhao, Fang; Huang, Wei-dong; Zhan, Ji-cheng

    2015-01-01

    At high levels, copper in grape mash can inhibit yeast activity and cause stuck fermentations. Wine yeast has limited tolerance of copper and can reduce copper levels in wine during fermentation. This study aimed to understand copper tolerance of wine yeast and establish the mechanism by which yeast decreases copper in the must during fermentation. Three strains of Saccharomyces cerevisiae (lab selected strain BH8 and industrial strains AWRI R2 and Freddo) and a simple model fermentation system containing 0 to 1.50 mM Cu2+ were used. ICP-AES determined Cu ion concentration in the must decreasing differently by strains and initial copper levels during fermentation. Fermentation performance was heavily inhibited under copper stress, paralleled a decrease in viable cell numbers. Strain BH8 showed higher copper-tolerance than strain AWRI R2 and higher adsorption than Freddo. Yeast cell surface depression and intracellular structure deformation after copper treatment were observed by scanning electron microscopy and transmission electron microscopy; electronic differential system detected higher surface Cu and no intracellular Cu on 1.50 mM copper treated yeast cells. It is most probably that surface adsorption dominated the biosorption process of Cu2+ for strain BH8, with saturation being accomplished in 24 h. This study demonstrated that Saccharomyces cerevisiae strain BH8 has good tolerance and adsorption of Cu, and reduces Cu2+ concentrations during fermentation in simple model system mainly through surface adsorption. The results indicate that the strain selected from China’s stress-tolerant wine grape is copper tolerant and can reduce copper in must when fermenting in a copper rich simple model system, and provided information for studies on mechanisms of heavy metal stress. PMID:26030864

  5. Role of copper in the process of spermatogenesis

    Directory of Open Access Journals (Sweden)

    Mateusz Ogórek

    2017-08-01

    Full Text Available Copper (Cu is an essential trace element required for the normal development of living organisms. Due to its redox potential, copper is a cofactor in many enzymes responsible for important processes in cells. Copper deficiency has a significant influence on the reduction or the total eradication of copper-dependent enzymes in the body, thereby inhibiting cell life processes. On the other hand, copper is a very reactive element and in its free state, it can trigger the production of large amounts of free radicals, which will consequently lead to the damage of proteins and DNA. Because of those reasons, living organisms have developed precise mechanisms regulating the concentration of copper in cells. Copper also plays a very important role in male fertility. It is an essential element for the production of male gametes. The significant role of copper is also described in the processes of cell division – mitotic and meiotic. Copper-dependent enzymes such as ceruloplasmin, superoxide dismutase SOD1 and SOD3, group of metallothionein and cytochrome c oxidase are present at all stages of gametogenesis as well as in the somatic cells of the testis and in the somatic cells of epididymis. Substantial amounts of copper can also be found in liquids associated with sperm in the epididymis and prostate. Copper also affects the integral androgen distribution in terms of fertility on the line hypothalamic-pituitary-testis. Both copper increase and deficiency leads to a significant reduction in male fertility, which spans the entire spectrum of abnormalities at the sperm level, male gonad, production of hormones and distribution of micronutrients such as zinc and iron. Nowadays, the effects of copper on gametes production have become more important and are connected with the increasing levels of pollution with heavy metals in environment.

  6. The effects of copper proximity on oxalate production in Fibroporia radiculosa

    Science.gov (United States)

    Katie M. Jenkins; Carol A. Clausen; Frederick Green III

    2014-01-01

    Copper remains a key component used in wood preservatives available today. However, the observed tolerance of several critical wood rotting organisms continues to be problematic. Tolerance to copper has been linked to the production and accumulation of oxalate, which precipitates copper into insoluble copper-oxalate crystals, thus inactivating copper ions. The purpose...

  7. Diversifying in two directions;largest private copper producer begins a 100 billion dream

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    <正>Recently,Xiangguang Copper Co.,Ltd.(hereinafter referred as Xiangguang Copper),the largest private copper producer,began to develop upstream and downstream industries.It has begun to acquire copper mines through equity participation in Australia;development towards downstream industries and investment in a copper wire deep processing base.

  8. Effect of plant growth on copper solubility and speciation in soil solution samples

    NARCIS (Netherlands)

    Romkens, PFAM; Bouwman, LA; Boon, GT

    1999-01-01

    The effect of plant growth on copper solubility and speciation was studied in a 10-week pot experiment. A copper-tolerant grass variety (Agrostis capillaris L. var. Parys Mountain) was grown in pots that contained either clean (copper-total approx. 30 mg kg(-1)) or copper contaminated soil (copper-t

  9. Effect of plant growth on copper solubility and speciation in soil solution samples

    NARCIS (Netherlands)

    Romkens, PFAM; Bouwman, LA; Boon, GT

    1999-01-01

    The effect of plant growth on copper solubility and speciation was studied in a 10-week pot experiment. A copper-tolerant grass variety (Agrostis capillaris L. var. Parys Mountain) was grown in pots that contained either clean (copper-total approx. 30 mg kg(-1)) or copper contaminated soil (copper-t

  10. Thermodynamic data for copper. Implications for the corrosion of copper under repository conditions

    Energy Technology Data Exchange (ETDEWEB)

    Puigdomenech, I. [Royal Inst. of Tech., Stockholm (Sweden); Taxen, C. [Swedish Corrosion Inst., Stockholm (Sweden)

    2000-08-01

    The stability of copper canisters has a central role in the safety concept for the planned nuclear spent fuel repository in Sweden. The corrosion of copper canisters will be influenced by the chemical and physical environment in the near-field of the repository, and thermodynamic equilibrium calculations provide the basis for understanding this system. Thermodynamic data have been selected in this work for solids and aqueous species in the system: Cu - H{sub 2}O - H{sup +} - H{sub 2} - F{sup -} - Cl{sup -} - S{sup 2-} - SO{sub 4}{sup 2-} - NO{sub 3}{sup -} - NO{sub 2}{sup -} - NH{sub 4}{sup +} PO{sub 4}{sup 3-} - CO{sub 3}{sup 2+} . For some reactions and compounds, for which no experimental information on temperature effects was available, entropy and heat capacity values have been estimated. The compiled data were used to calculate thermodynamic equilibria for copper systems up to 100 deg C. The stability of copper in contact with granitic groundwaters has been illustrated using chemical equilibrium diagrams, with he following main conclusions: Dissolved sulphide and O{sub 2} in groundwater are the most damaging components for copper corrosion. If available, HS{sup -} will react quantitatively with copper to form a variety of sulphides. However, sulphide concentrations in natural waters are usually low, because it forms sparingly soluble solids with transition metals, including Fe(II), which is wide-spread in reducing environments. Chloride can affect negatively copper corrosion. High concentrations (e.g., [Cl{sup -}]TOT > 60 g/l) may be unfavourable for the general corrosion of copper in combination with in the following circumstances: Low pH (< 4 at 25 deg C, or < 5 at 100 deg C). The presence of other oxidants than H{sup +}. The negative effects of Cl{sup -} are emphasised at higher temperatures. The chloride-enhancement of general corrosion may be beneficial for localised corrosion: pitting and stress corrosion cracking. The concept of redox potential, E

  11. 铜及铜合金着色%Coloring of copper and copper alloys

    Institute of Scientific and Technical Information of China (English)

    程沪生

    2011-01-01

    简述了铜及铜合金着色的原理.总结了铜及铜合金着黑色、褐色、绿色、蓝色的工艺配方及操作条件,介绍了手工点涂铜绿(铜锈)、双色点蚀(先着黑色再点蚀铜绿)、套色、着土黄铜绿色等多种特殊的着色工艺.%The principle of coloring of copper and copper alloys was described. The process formulations and operation conditions for obtaining black, brown, green, and blue colors on copper and copper alloys were summarized. Some special coloring processes were introduced, such as spot coating to form patina (green corrosion products of copper), black coloring followed by spot corrosion to form two tones, covering with another color on a previously colored workpiece, and successive coloring with khaki and green.

  12. design and operations challenges of a single toggle jaw crusher

    African Journals Online (AJOL)

    HOD

    1,5 ADVANCED MANUFACTURING TECHNOLOGY PROGRAMME, JALINGO, ..... capacity; require a small power input per unit of product .... Journal of Application or Innovation in Engineering ... tribological barrier overcoming”, Science of.

  13. Toxic effects of copper sulfate and copper nanoparticles on minerals, enzymes, thyroid hormones and protein fractions of plasma and histopathology in common carp Cyprinus carpio.

    Science.gov (United States)

    Hoseini, Seyyed Morteza; Hedayati, Aliakbar; Taheri Mirghaed, Ali; Ghelichpour, Melika

    2016-10-01

    Differences in toxicological effects of dissolved copper and copper nanoparticles were studied in common carp, Cyprinus carpio. The fish were exposed to 0.25mgL(-1) copper as copper sulfate (0.25Cu), 0.25mgL(-1) copper as copper oxide nanoparticles (0.25NCu) and 25mgL(-1) copper as copper oxide nanoparticles (25NCu) over 14days. Plasma biochemical, enzymatic and hormonal characteristics, and liver and kidney histopathology were examined at the end of the experiment. The results showed that both forms of copper had no significant effects on plasma calcium levels, however, significantly increased plasma phosphorous levels, compared to control group (no added copper). Plasma alanine transaminase (ALT) activity increased in 0.25Cu and 25NCu treatments compared to the control and 0.25NCu treatments. Nanoparticle copper exposure significantly decreased plasma alkaline phosphatase (ALP) activity compared to the control and 0.25Cu treatments. Only copper sulfate exposure caused plasma aspartate transaminase (AST) elevation. Both copper forms increased plasma T4 and free T4 (FT4); however, copper sulfate effect was higher than nanoparticle copper. Copper sulfate exposure increased plasma albumin fraction, whereas, 25mgL(-1) copper nanoparticle exposure increased plasma α2-globulin fraction compared to the control. Both copper forms damaged the fish liver and kidney, however, copper sulfate caused more severe damages compared to nanoparticle copper. Overall, except for plasma ALP and α2-globulin fraction, dissolved copper seems to be more toxic than nanoparticle copper in common carp. Copyright © 2016 Elsevier GmbH. All rights reserved.

  14. Copper-2 Ingestion, Plus Increased Meat Eating Leading to Increased Copper Absorption, Are Major Factors Behind the Current Epidemic of Alzheimer’s Disease

    Science.gov (United States)

    Brewer, George J.

    2015-01-01

    It has become clear that copper toxicity is playing a major role in Alzheimer’s disease; but why is the brain copper toxicity with cognition loss in Alzheimer’s disease so much different clinically than brain copper toxicity in Wilson’s disease, which results in a movement disorder? Furthermore, why is the inorganic copper of supplement pills and in drinking water so much more damaging to cognition than the organic copper in food? A recent paper, which shows that almost all food copper is copper-1, that is the copper-2 of foods reverts to the reduced copper-1 form at death or harvest, gives new insight into these questions. The body has an intestinal transport system for copper-1, Ctr1, which channels copper-1 through the liver and into safe channels. Ctr1 cannot absorb copper-2, and some copper-2 bypasses the liver, ends up in the blood quickly, and is toxic to cognition. Humans evolved to handle copper-1 safely, but not copper-2. Alzheimer’s is at least in part, a copper-2 toxicity disease, while Wilson’s is a general copper overload disease. In this review, we will show that the epidemiology of the Alzheimer’s epidemic occurring in developed, but not undeveloped countries, fits with the epidemiology of exposure to copper-2 ingestion leached from copper plumbing and from copper supplement pill ingestion. Increased meat eating in developed countries is also a factor, because it increases copper absorption, and thus over all copper exposure. PMID:26633489

  15. Copper-2 Ingestion, Plus Increased Meat Eating Leading to Increased Copper Absorption, Are Major Factors Behind the Current Epidemic of Alzheimer’s Disease

    Directory of Open Access Journals (Sweden)

    George J. Brewer

    2015-12-01

    Full Text Available It has become clear that copper toxicity is playing a major role in Alzheimer’s disease; but why is the brain copper toxicity with cognition loss in Alzheimer’s disease so much different clinically than brain copper toxicity in Wilson’s disease, which results in a movement disorder? Furthermore, why is the inorganic copper of supplement pills and in drinking water so much more damaging to cognition than the organic copper in food? A recent paper, which shows that almost all food copper is copper-1, that is the copper-2 of foods reverts to the reduced copper-1 form at death or harvest, gives new insight into these questions. The body has an intestinal transport system for copper-1, Ctr1, which channels copper-1 through the liver and into safe channels. Ctr1 cannot absorb copper-2, and some copper-2 bypasses the liver, ends up in the blood quickly, and is toxic to cognition. Humans evolved to handle copper-1 safely, but not copper-2. Alzheimer’s is at least in part, a copper-2 toxicity disease, while Wilson’s is a general copper overload disease. In this review, we will show that the epidemiology of the Alzheimer’s epidemic occurring in developed, but not undeveloped countries, fits with the epidemiology of exposure to copper-2 ingestion leached from copper plumbing and from copper supplement pill ingestion. Increased meat eating in developed countries is also a factor, because it increases copper absorption, and thus over all copper exposure.

  16. Settling of copper drops in molten slags

    Science.gov (United States)

    Warczok, A.; Utigard, T. A.

    1995-02-01

    The settling of suspended metal and sulfide droplets in liquid metallurgical, slags can be affected by electric fields. The migration of droplets due to electrocapillary motion phenomena may be used to enhance the recovery of suspended matte/metal droplets and thereby to increase the recovery of pay metals. An experimental technique was developed for the purpose of measuring the effect of electric fields on the settling rate of metallic drops in liquid slags. Copper drops suspended in CaO-SiO2-Al2O3-Cu2O slags were found to migrate toward the cathode. Electric fields can increase the settling rate of 5-mm-diameter copper drops 3 times or decrease the settling until levitation by reversal of the electric field. The enhanced settling due to electric fields decreases with increasing Cu2O contents in the slag.

  17. Understanding the photomagnetic behavior in copper octacyanomolybdates.

    Science.gov (United States)

    Bunău, O; Arrio, M-A; Sainctavit, Ph; Paulatto, L; Calandra, M; Juhin, A; Marvaud, V; Cartier dit Moulin, C

    2012-08-30

    The mechanism of photomagnetism in copper octacyanomolybdate molecules is currently under debate. Contrary to the general belief that the photomagnetic transition occurs only due to a photoinduced electron transfer from the molybdenum to the copper atom, recent X-ray magnetic dichroic (XMCD) data clearly indicate that this phenomenon is associated at low temperature to a local low-spin-high-spin transition on the molybdenum atom. In this article we provide theoretical justification for these experimental facts. We show the first simulation of X-ray absorption (XAS) and magnetic circular dichroism (XMCD) spectra at the L(2,3) edges of molybdenum from the joint perspective of density functional theory (DFT) calculations and ligand field multiplet (LFM) theory. The description of electronic interactions seems mandatory for reproducing the photomagnetic state.

  18. Copper Planar Microcoils Applied to Magnetic Actuation

    CERN Document Server

    Moulin, J; Martincic, E; Dufour-Gergam, E

    2008-01-01

    Recent advances in microtechnology allow realization of planar microcoils. These components are integrated in MEMS as magnetic sensor or actuator. In the latter case, it is necessary to maximize the effective magnetic field which is proportional to the current passing through the copper track and depends on the distance to the generation microcoil. The aim of this work was to determine the optimal microcoil design configuration for magnetic field generation. The results were applied to magnetic actuation, taking into account technological constraints. In particular, we have considered different realistic configurations that involve a magnetically actuated device coupled to a microcoil. Calculations by a semi-analytical method using Matlab software were validated by experimental measurements. The copper planar microcoils are fabricated by U.V. micromoulding on different substrates: flexible polymer (Kapton) and silicate on silicon. They are constituted by a spiral-like continuous track. Their total surface is ...

  19. Microstructure and Service Properties of Copper Alloys

    Directory of Open Access Journals (Sweden)

    Polok-Rubiniec M.

    2016-09-01

    Full Text Available This elaboration shows the effect of combined heat treatment and cold working on the structure and utility properties of alloyed copper. As the test material, alloyed copper CuTi4 was employed. The samples were subjected to treatment according to the following schema: 1st variant – supersaturation and ageing, 2nd variant – supersaturation, cold rolling and ageing. The paper presents the results of microstructure, hardness, and abrasion resistance. The analysis of the wipe profile geometry was realized using a Zeiss LSM 5 Exciter confocal microscope. Cold working of the supersaturated solid solution affects significantly its hardness but the cold plastic deformation causes deterioration of the wear resistance of the finally aged CuTi4 alloy.

  20. Spreading Modes on Copper and Steel Surfaces

    Directory of Open Access Journals (Sweden)

    Feoktistov Dmitry

    2016-01-01

    Full Text Available This work presents the experimental results of the studying the effect of surface roughness, microstructure and liquid flow rate on the dynamic contact angle during spreading of distilled nondeaerated water drop on a solid horizontal substrate. Copper and steel substrates with different roughness have been investigated. Three spreading modes were conventionally indicated. It was found that the spreading of drops on substrates made of different materials occurs in similar modes. However, the duration of each mode for substrates made of copper and steel are different. Spreading of a liquid above the asperities of a surface micro relief was observed to be dominant for large volumetric flow rates of drops (0.01 ml/s. Liquid was spreading inside the grooves of a rough substrate at low rates (0.005 ml/s.