WorldWideScience

Sample records for lubrication research survey

  1. Solid Lubricants and Coatings for Extreme Environments: State-of-the-Art Survey

    Science.gov (United States)

    Miyoshi, Kazuhisa

    2007-01-01

    An investigation was conducted to survey anticipated requirements for solid lubricants in lunar and Martian environments, as well as the effects of these environments on lubricants and their performance and durability. The success of habitats and vehicles on the Moon and Mars, and ultimately, of the human exploration of and permanent human presence on the Moon and Mars, are critically dependent on the correct and reliable operation of many moving mechanical assemblies and tribological components. The coefficient of friction and lifetime of any lubricant generally vary with the environment, and lubricants have very different characteristics under different conditions. It is essential, therefore, to select the right lubrication technique and lubricant for each mechanical and tribological application. Several environmental factors are hazardous to performance integrity on the Moon and Mars. Potential threats common to both the Moon and Mars are low ambient temperatures, wide daily temperature swings (thermal cycling), solar flux, cosmic radiation, and large quantities of dust. The surface of Mars has the additional challenges of dust storms, winds, and a carbon dioxide atmosphere. Solid lubricants and coatings are needed for lunar and Martian applications, where liquid lubricants are ineffective and undesirable, and these lubricants must perform well in the extreme environments of the Moon, Mars, and space, as well as on Earth, where they will be assembled and tested. No solid lubricants and coatings and their systems currently exist or have been validated that meet these requirements, so new solid lubricants must be designed and validated for these applications.

  2. Survey research.

    Science.gov (United States)

    Alderman, Amy K; Salem, Barbara

    2010-10-01

    Survey research is a unique methodology that can provide insight into individuals' perspectives and experiences and can be collected on a large population-based sample. Specifically, in plastic surgery, survey research can provide patients and providers with accurate and reproducible information to assist with medical decision-making. When using survey methods in research, researchers should develop a conceptual model that explains the relationships of the independent and dependent variables. The items of the survey are of primary importance. Collected data are only useful if they accurately measure the concepts of interest. In addition, administration of the survey must follow basic principles to ensure an adequate response rate and representation of the intended target sample. In this article, the authors review some general concepts important for successful survey research and discuss the many advantages this methodology has for obtaining limitless amounts of valuable information.

  3. REFRIGERANT/LUBRICANT MIXTURES: PROBLEMS OF APPLICATION AND PROPERTY RESEARCH

    Directory of Open Access Journals (Sweden)

    Yu. Semenyuk

    2013-10-01

    Full Text Available The results and generalizations of thermophysical property research for the refrigerant/lubricant mixtures are summarized. The methodological aspects of the experimental studies of the thermal properties of real working media for vapor compression refrigeration machines and the general principles of the thermodynamic properties simulation for such solutions are analyzed. It is shown that the admixtures of compressor oil in the refrigerant make the efficiency parameters of compressor systems much lower. The question of a selective solubility of the multicomponent refrigerants in compressor oils is discussed.

  4. Nanomaterials in Lubricants: An Industrial Perspective on Current Research

    Directory of Open Access Journals (Sweden)

    Boris Zhmud

    2013-11-01

    Full Text Available This paper presents an overview on the use of various classes of nanomaterials in lubricant formulations. The following classes of nanomaterials are considered: fullerenes, nanodiamonds, ultradispersed boric acid and polytetrafluoroethylene (PTFE. Current advances in using nanomaterials in engine oils, industrial lubricants and greases are discussed. Results of numerous studies combined with formulation experience of the authors strongly suggest that nanomaterials do indeed have potential for enhancing certain lubricant properties, yet there is a long way to go before balanced formulations are developed.

  5. Design of the GLARE tool. A grease lubrication apparatus for research and education

    International Nuclear Information System (INIS)

    Rawlings, B.

    2012-01-01

    The GLARE: Grease Lubrication Apparatus for Research and Education was designed as a fourth year thesis project with the University of Ontario Institute of Technology (UOIT). The purpose of the apparatus is to train Ontario Power Generation Nuclear (OPGN) staff to properly lubricate bearings with grease and to help detect early equipment failures. Proper re-lubrication is critical to the nuclear industry as equipment may be inaccessible for long periods of time. A secondary purpose for the tool is for UOIT research and undergraduate laboratories.This abstract provides an overview of the project and its application to the nuclear industry. (author)

  6. Research on a lubricating grease print process for cylindrical cylinder

    Science.gov (United States)

    Yang, Liu; Zhang, Xuan; Wang, XianYan; Tan, XiaoYan

    2017-09-01

    In vehicle braking system and clutch system of transmission, there is always a kind of cylindrical component dose reciprocating motion. The main working method is the reciprocating motion between the rubber sealing parts and cylindrical parts, the main factor affects the service life of the product is the lubricating performance of the moving parts. So the lubricating performance between cylinders and rubber sealing rings is particularly important, same as the quality of the grease applies on the surface of the surface of cylinder. Traditional method of manually applying grease has some defects such as applying unevenly, applying tools like brush and cloth easily falls off and affect the cleanness of products, contact skin easily cause allergy, waste grease due to the uncontrollable of grease quantity using in applying, low efficiency of manual operation. An automatic, quantitative and high pressure applying equipment is introduced in this document to replace the traditional manually applying method, which can guarantee the applying quality of the grease which are painted on the surface of cylinder and bring economic benefits to the company.

  7. Lubrication fundamentals

    CERN Document Server

    Pirro, DM

    2001-01-01

    This work discusses product basics, machine elements that require lubrication, methods of application, lubricant storage and handling, and lubricant conservation. This edition emphasizes the need for lubrication and careful lubricant selection.

  8. Lubrication fundamentals

    International Nuclear Information System (INIS)

    Wills, J.G.

    1990-01-01

    This book is organized under the following headings: lubricating oils; lubricating greases; synthetic lubricants; machine elements; lubricant application; internal combustion engines; stationary gas turbines; steam turbines; hydraulic turbines; nuclear power plants; automotive chassis components; automotive power transmissions; compressors; handling, storing, and dispensing lubricants, in-plant handling for lubricant conservation

  9. Research work in the field of lubricants with the aid of radionuclide techniques

    International Nuclear Information System (INIS)

    Ruediger, V.

    1975-01-01

    The application of radionuclide technique to research tasks in the field of lubricants in the laboratorium fuer Isotopentechnik for the last three years is dealt with. In addition, oil foaming, operational oil testing, friction bearing investigations, motor examinations by means of the course of wear, as well as the grain size distribution of the abrasion, the bearing loadability of newtonian and non-newtonian oils, the cylinder wear (according to the principle of density measurement by absorption of characteristic X-rays), are described. (HK/LH) [de

  10. Research into Oil-based Colloidal-Graphite Lubricants for Forging of Al-based Alloys

    International Nuclear Information System (INIS)

    Petrov, A.; Petrov, P.; Petrov, M.

    2011-01-01

    The presented paper describes the topical problem in metal forging production. It deals with the choice of an optimal lubricant for forging of Al-based alloys. Within the scope of the paper, the properties of several oil-based colloidal-graphite lubricants were investigated. The physicochemical and technological properties of these lubricants are presented. It was found that physicochemical properties of lubricant compositions have an influence on friction coefficient value and quality of forgings.The ring compression method was used to estimate the friction coefficient value. Hydraulic press was used for the test. The comparative analysis of the investigated lubricants was carried out. The forging quality was estimated on the basis of production test. The practical recommendations were given to choose an optimal oil-based colloidal-graphite lubricant for isothermal forging of Al-based alloy.

  11. Men's use and perceptions of commercial lubricants: prevalence and characteristics in a nationally representative sample of American adults.

    Science.gov (United States)

    Reece, Michael; Herbenick, Debby; Schick, Vanessa; Sanders, Stephanie A; Fortenberry, J Dennis

    2014-05-01

    Most research on men's use of commercial lubricants during sexual activities is in the context of condom use and often specifically among men who have sex with men. Less is known about men's use of lubricants associated with a broader range of sexual experiences. The aims of this study are to document the prevalence of commercial lubricant use among adult U.S. men (age 18+), to document men's use of lubricants across solo and partnered sexual behaviors, and to assess men's perceptions of the contributions lubricants have to the sexual experience. Data are from the 2012 National Survey of Sexual Health and Behavior, which involved the administration of an online questionnaire to a nationally representative probability sample of U.S. adults ages 18 and older. Sociodemographic characteristics, recent and lifetime commercial lubricant use, lubricant use during specific sexual behaviors, frequency of lubricant use, and reasons for lubricant use. Most men in the United States (70%, N = 1,014) reported having used a commercial lubricant, with men older than 24 and those in a relationship more likely to report lubricant use. About one in four men had used a lubricant in the past 30 days. Intercourse was the most common behavior during which men used lubricant, though solo masturbation and partnered sexual play were also frequently linked to lubricant use. The most common reasons for lubricant use included "to make sex more comfortable," "for fun," "curiosity," and "my partner wanted to." Most American men have used a lubricant; lubricant use is common across all age groups, and some of the most common reasons why men report using lubricants have to do with sexual enhancement, comfort, and pleasure. Clinicians may find these data helpful to their efforts to educate patients about lubricant use, comfort during sex, and sexual enhancement. © 2014 International Society for Sexual Medicine.

  12. Research of the pre-launch powered lubrication device of major parts of the engine D-240

    Science.gov (United States)

    Korchuganova, M.; Syrbakov, A.; Tkachev, A.; Zorina, T.

    2015-09-01

    In the publication, the issues have been considered concerning combustion engine start wear of mobile machines in case of outside storage in the conditions of low environmental temperature. Based on the analysis of existing methods and constructions of powered lubrication devices for contact surfaces of engines, a design of a combined device has been suggested which unites the functions of hydraulic and heat accumulators. On the basis of the elaborated design, preparatory tests have been conducted in order to evaluate the effectiveness of pre-start oil circulation in the engine D-240, as well as the effectiveness rate of thermoinsulation and the heating device of the hydraulic accumulator. The findings of the survey have shown that the pre-start powered lubrication device for major parts of the engine is effective.

  13. Numerical research on rotating speed influence and flow state distribution of water-lubricated thrust bearing

    International Nuclear Information System (INIS)

    Deng Xiao; Deng Liping; Huang Wei

    2015-01-01

    Water-lubricated thrust bearing is one of the key parts in canned motor pump, for example, the RCP in AP1000, and it functions to balance axial loads. A calculation model which can handle all flow state lubrication performance for water-lubricated thrust bearing has been presented. The model first includes laminar and turbulent Reynolds' equation. Then to get continuous viscosity coefficients cross critical Reynolds number, a transition zone which ranges based on engineering experience is put up, through which Hermite interpolation is employed. The model is numerically solved in finite difference method with uniform grids. To accelerate the calculation process, multigrid method and line relaxation is adopted within the iteration procedure. A medium sized water-lubricated tilting pad thrust bearing is exampled to verify the calculation model. Results suggest that as rotating speed enlarges, lubrication state distribution of the thrust bearing gradually tends to turbulent lubrication from the intersection corner of pad outer diameter and pad inlet to the opposite, minimum water film thickness increases approximately linearly, maximum water film pressure has little change, meanwhile the friction power grows nearly in exponential law which could result in bad effect by yielding much more heat. (author)

  14. Identification of tribological research and development needs for lubrication of advanced heat engines

    Energy Technology Data Exchange (ETDEWEB)

    Fehrenbacher, L.L.; Levinson, T.M.

    1985-09-01

    The continuous evolution of higher power density propulsion systems has always fueled the search for materials and lubricants with improved thermal and/or durability characteristics. Tribology of the upper cylinder region is the major technology roadblock in the path of the adiabatic diesel engine which has an energy reduction potential that exceeds that of all other engine development types. This tribology assessment resulted in the following major conclusions: a low friction and a low wear seal between the ring belt and cylinder bore are the most critical tribology functions in the diesel combustion chamber; development of solid lubrication systems will not satisfy the simultaneous low friction and low wear requirements in the upper cylinder area; development of separate upper cylinder liquid lubrication systems offers the most attractive design alternative for meeting the operational goals of future ''minimum cooled'' diesel engines.

  15. 2007 Veterans Employability Research Survey

    Data.gov (United States)

    Department of Veterans Affairs — The 2007 Veterans Employability Research Survey (VERS) was conducted to determine the factors that impact veterans' employability resulting from participation in the...

  16. Lubrication a practical guide to lubricant selection

    CERN Document Server

    Lansdown, A R

    1982-01-01

    Lubrication: A Practical Guide to Lubricant Selection provides a guide to modern lubrication practice in industry, with emphasis on practical application, selection of lubricants, and significant factors that determine suitability of a lubricant for a specific application. Organized into 13 chapters, this book begins with a brief theoretical opening chapter on the basic principles of lubrication. A chapter then explains the choice of lubricant type, indicating how to decide whether to use oil, grease, dry lubricant, or gas lubrication. Subsequent chapters deal with detailed selection of lubric

  17. Pleural Lubrication

    Directory of Open Access Journals (Sweden)

    Cristina Porta

    2016-05-01

    Full Text Available During breathing, the pleural surfaces slide against each other continuously without damage. Pleural liquid and lubricating molecules should provide the lubrication of the sliding surfaces, thus protecting the mesothelium from shear-induced abrasion. D’Angelo et al. (Respir. Physiol. Neurobiol. 2004 measured the coefficient of kinetic friction (μ of rabbit parietal pleura sliding against visceral pleura in vitro at physiological velocities and under physiological loads; it was ~0.02 and did not change with sliding velocity, consistent with boundary lubrication. μ in boundary lubrication can be influenced by surface molecules like hyaluronan, sialomucin or surface active phospholipidis. Hyaluronan or sialomucin is able to restore good boundary lubrication in damaged mesothelium. Nevertheless, hyaluronidase and neuraminidase treatment of the mesothelium does not increase μ, though neuraminidase cleaves sialic acid from the mesothelium. Short pronase or phospholipase treatment, so as to affect only the mesothelial glycocalyx, increases μ, and this increase is removed by hyaluronan or sialomucin. On the other hand, addition of phospholipids after phospholipase treatment produces a small effect relative to that of hyaluronan or sialomucin, and this effect is similar with unsaturated or saturated phospholipids. In damaged mesothelium, the lubrication regimen becomes mixed, but addition of hyaluronan or sialomucin restores boundary lubrication.

  18. Developments in lubricant technology

    CERN Document Server

    Srivastava, S P

    2014-01-01

    Provides a fundamental understanding of lubricants and lubricant technology including emerging lubricants such as synthetic and environmentally friendly lubricants Teaches the reader to understand the role of technology involved in the manufacture of lubricants Details both major industrial oils and automotive oils for various engines Covers emerging lubricant technology such as synthetic and environmentally friendly lubricants Discusses lubricant blending technology, storage, re-refining and condition monitoring of lubricant in equipment

  19. Operations Research Games : A Survey

    NARCIS (Netherlands)

    Borm, P.E.M.; Hamers, H.J.M.; Hendrickx, R.L.P.

    2001-01-01

    This paper surveys the research area of cooperative games associated with several types of operations research problems in which various decision makers (players) are involved.Cooperating players not only face a joint optimisation problem in trying, e.g., to minimise total joint costs, but also face

  20. Adhesion, friction, wear, and lubrication research by modern surface science techniques.

    Science.gov (United States)

    Keller, D. V., Jr.

    1972-01-01

    The field of surface science has undergone intense revitalization with the introduction of low-energy electron diffraction, Auger electron spectroscopy, ellipsometry, and other surface analytical techniques which have been sophisticated within the last decade. These developments have permitted submono- and monolayer structure analysis as well as chemical identification and quantitative analysis. The application of a number of these techniques to the solution of problems in the fields of friction, lubrication, and wear are examined in detail for the particular case of iron; and in general to illustrate how the accumulation of pure data will contribute toward the establishment of physiochemical concepts which are required to understand the mechanisms that are operational in friction systems. In the case of iron, LEED, Auger and microcontact studies have established that hydrogen and light-saturated organic vapors do not establish interfaces which prevent iron from welding, whereas oxygen and some oxygen and sulfur compounds do reduce welding as well as the coefficient of friction. Interpretation of these data suggests a mechanism of sulfur interaction in lubricating systems.

  1. Laboratory services series: a lubrication program

    Energy Technology Data Exchange (ETDEWEB)

    Bowen, H.B.; Miller, T.L.

    1976-05-01

    The diversity of equipment and operating conditions at a major national research and development laboratory requires a systematic, effective lubrication program. The various phases of this program and the techniques employed in formulating and administering this program are discussed under the following topics: Equipment Identification, Lubrication Requirements, Assortment of Lubricants, Personnel, and Scheduling.

  2. Laboratory services series: a lubrication program

    International Nuclear Information System (INIS)

    Bowen, H.B.; Miller, T.L.

    1976-05-01

    The diversity of equipment and operating conditions at a major national research and development laboratory requires a systematic, effective lubrication program. The various phases of this program and the techniques employed in formulating and administering this program are discussed under the following topics: Equipment Identification, Lubrication Requirements, Assortment of Lubricants, Personnel, and Scheduling

  3. Hydrodynamic Lubrication

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 9. Hydrodynamic Lubrication Experiment with 'Floating' Drops. Jaywant H Arakeri K R Sreenivas. General Article Volume 1 Issue 9 September 1996 pp 51-58. Fulltext. Click here to view fulltext PDF. Permanent link:

  4. De-Lubrication Behavior Of Novel EBS Based Admixed Lubricant In Aluminum P/M Alloy

    Directory of Open Access Journals (Sweden)

    Oh M.C.

    2015-06-01

    Full Text Available The objective of the present research is to develop a novel lubricant for Al-Cu-Mg P/M alloy and to address the effects of the lubricant and compaction pressure on sintered properties. A lubricant mixture consisting of Ethylene Bis Stearamide, Zn-Stearate, and fatty acid was newly developed in this study, and the de-lubrication behavior was compared with that of other commercial lubricants, such as Ethylene Bis Stearamide, Zn-Stearate, and Al-Stearate. Density and transverse rupture strength of sintered materials with each lubricant were examined, respectively. The microstructural analysis was conducted using optical microscope.

  5. A lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Parfenova, V.A.; Belov, P.S.; Guliaev, I.A.; Korenev, K.D.

    1979-07-30

    For the purpose of improving the thermo-oxidation stability of washing and protective properties, dithiophosphate of the metal having the formula ((pi-R-C/sub 6/H/sub 4/OCH/sub 2/-CH/sub 2/O)/sub 2/P(=S)S)/sub 2/M (where R is the alkyl of C/sub 8/--C/sub 12/ isostructure, M is either cadmium, barium, or zinc) (I) is added into the petroleum oil for the lubrication of car engine units and containing polyethylene oxyphenylpolyamine (PEP). The lubricant has the following composition, in %: PEP, 1 to 5; (I), 0.5 to 5; petroleum oil, up to 100. In order to produce a lubricant for petroleum oil, for example MT-16, PEF and (I) are added (R = octyl or dodecyl), it is heated up to 80/sup 0/ and mixed in a nitrogen current for one hour. The combination of the additives in the patented composition has synergistic activities and the oil being patented, according to operative properties, surpasses the oil with industrial dithiophosphate additive MNI-IP-22k.

  6. Achievement report for fiscal 1998 on area consortium research and development business, 1st year. Area consortium energy research and development (molding material processing eco-system using powder lubricant); 1998 nendo chiiki consortium energy kenkyu kaihatsu bun'ya. Funtai rikei junkatsuzai wo mochiita sokeizai kako eko system no kenkyu kaihatsu (dai 1 nendo)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    A material processing technology demanding but low energy and cost and causing low environmental impact was developed using a powder lubricant in a closed metal die system. An inorganic powder excellent in adhesiveness as lubricant was discovered. Powder lubricants for die casting and new carbon lubricants for metal die forging were also developed. In a test in an eco-die casting system, it was found that power was better than water solution in terms of finish and energy efficiency. In the development of a metal forging system using a powder lubricant, existing graphite lubricants and new powder lubricants containing fullerene were subjected to evaluation (ring tests). Two types of graphite solutions now in use and two powder lubricants were evaluated by the ring tests, and this enabled the comprehension of powder lubricant characteristics. For the development of a die casting system requiring no lubricant, a metal die surface treatment method was found that produces a surface excellent in resisting erosion by the application of the aluminizing ion nitriding composite treatment method. In addition, wettability was compared between a PVD (physical vapor deposition)-formed nitride film and the powder lubricant constituents. The report also refers to surveys conducted for commercialization. (NEDO)

  7. Solid lubricants and surfaces

    CERN Document Server

    Braithwaite, E R

    1964-01-01

    Solid Lubricants and Surfaces deals with the theory and use of solid lubricants, particularly in colloidal form. Portions of this book are devoted to graphite and molybdenum disulfides, which are widely used solid lubricants in colloidal form. An extensive literature on the laboratory examination of hundreds of solids as potential lubricants is also provided in this text. Other topics discussed include the metals and solid lubricants; techniques for examining surfaces; other solid lubricants; metal shaping; and industrial uses of solid-lubricant dispersions. This publication is beneficial to e

  8. Soft lubrication

    Science.gov (United States)

    Skotheim, Jan; Mahadevan, Laksminarayanan

    2004-11-01

    We study the lubrication of fluid-immersed soft interfaces and show that elastic deformation couples tangential and normal forces and thus generates lift. We consider materials that deform easily, due to either geometry (e.g a shell) or constitutive properties (e.g. a gel or a rubber), so that the effects of pressure and temperature on the fluid properties may be neglected. Four different system geometries are considered: a rigid cylinder moving tangentially to a soft layer coating a rigid substrate; a soft cylinder moving tangentially to a rigid substrate; a cylindrical shell moving tangentially to a rigid substrate; and finally a journal bearing coated with a thin soft layer, which being a conforming contact allows us to gauge the influence of contact geometry. In addition, for the particular case of a soft layer coating a rigid substrate we consider both elastic and poroelastic material responses. Finally, we consider the role of contact geometry in the context of the journal bearing, a conforming contact. For all these cases we find the same generic behavior: there is an optimal combination of geometric and material parameters that maximizes the dimensionless normal force as a function of the softness.

  9. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research and development of energy in its 2nd year (Research and development of eco-friendly material processing system using powder lubricant type releasing agent); 1999 nendo funtai rigata junkatsuzai wo mochiita sokeizai kako eko system no kenkyu kaihatsu seika hokokusho. 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    For the purpose of constructing a material processing industry consuming less energy, demanding less cost, and imposing less impact on the environment, research and development is conducted of an eco-friendly die-casting system which uses a powder lubricant type releasing agent. In the research, the effect of the die-casting metal cavity internal structure and the pressure pattern on the flowing behavior of the powder lubricant is made visible for analysis, and the mechanism of homogenous dispersion flow and injection is determined. In the research on powder type lubricants, efforts center on a calcium hydroxide-based powder lubricant, and studies are conducted about its adhesion to the metal die at high temperatures and the adhesion to and release from the metal die of molten aluminum, and the calcium hydroxide-based powder lubricant is found to work effectively. For the application of the powder lubricant to die-forging, a real forging system is experimentally built which includes a water-cooled die into which powder is injected with the die in the closed state. A powder lubricant type releasing agent GW-23 is tested for performance using this system, and then it is found that a powder lubricant prolongs the service life of dies and improves on working environments. (NEDO)

  10. Elasto-hydrodynamic lubrication

    CERN Document Server

    Dowson, D; Hopkins, D W

    1977-01-01

    Elasto-Hydrodynamic Lubrication deals with the mechanism of elasto-hydrodynamic lubrication, that is, the lubrication regime in operation over the small areas where machine components are in nominal point or line contact. The lubrication of rigid contacts is discussed, along with the effects of high pressure on the lubricant and bounding solids. The governing equations for the solution of elasto-hydrodynamic problems are presented.Comprised of 13 chapters, this volume begins with an overview of elasto-hydrodynamic lubrication and representation of contacts by cylinders, followed by a discussio

  11. Biodegradation of lubricant oil

    African Journals Online (AJOL)

    M

    2012-09-25

    Sep 25, 2012 ... lubricating oil, showed high biodegradation efficiency for different used lubricating oils. Capability of ..... amount after biodegradation showed no difference in the .... products polluted sites in Elele, Rivers State, Ngeria.

  12. Survey Research: Methods, Issues and the Future

    Science.gov (United States)

    Brewer, Ernest W.; Torrisi-Steele, Geraldine; Wang, Victor C. X.

    2015-01-01

    Survey research is prevalent among many professional fields. Both cost effective and time efficient, this method of research is commonly used for the purposes of gaining insight into the attitudes, thoughts, and opinions of populations. Additionally, because there are several types of survey research designs and data collection instruments, the…

  13. Surveys and questionnaires in nursing research.

    Science.gov (United States)

    Timmins, Fiona

    2015-06-17

    Surveys and questionnaires are often used in nursing research to elicit the views of large groups of people to develop the nursing knowledge base. This article provides an overview of survey and questionnaire use in nursing research, clarifies the place of the questionnaire as a data collection tool in quantitative research design and provides information and advice about best practice in the development of quantitative surveys and questionnaires.

  14. Marketing Research Using Online Surveys

    Directory of Open Access Journals (Sweden)

    Landoy A.

    2009-12-01

    Full Text Available In this article, quality criteria for electronic survey design and use based on an investigation of recent electronic survey literature are presented. The results show that a hard-to-reach audience can be reached using the quality criteria that are most important for reaching these types of audiences. It is presented one online questionnaire for the academic staff community at Transilvania university of Brasov, Romania. The Limerik one was tested.

  15. Tethered Lubricants for Small Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lynden A. Archer

    2006-01-09

    The objective of this research project is two-fold. First, to fundamentally understand friction and relaxation dynamics of polymer chains near surfaces; and second, to develop novel self-lubricated substrates suitable for MEMS devices. During the three-year performance period of this study the PI and his students have shown using theory and experiments that systematic introduction of disorder into tethered lubricant coatings (e.g. by using self-assembled monolayer (SAM) mixtures or SAMs with nonlinear, branched architectures) can be used to significantly reduce the friction coefficient of a surface. They have also developed a simple procedure based on dielectric spectroscopy for quantifying the effect of surface disorder on molecular relaxation in lubricant coatings. Details of research accomplishments in each area of the project are described in the body of the report.

  16. FY2014 Fuel & Lubricant Technologies Annual Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Stork, Kevin [Office of Energy Efficiency and Renewable Energy (EERE), Washington, DC (United States)

    2016-02-01

    Annual progress report for Fuel & Lubricant Technologies. The Fuel & Lubricant Technologies Program supports fuels and lubricants research and development (R&D) to provide vehicle manufacturers and users with cost-competitive options that enable high fuel economy with low emissions, and contribute to petroleum displacement.

  17. Research of the pre-launch powered lubrication device of major parts of the engine D-240

    OpenAIRE

    Korchuganova, Mariya Anatolievna; Syrbakov, Andrey Pavlovich; Tkachev, A.; Zorina, T.

    2015-01-01

    In the publication, the issues have been considered concerning combustion engine start wear of mobile machines in case of outside storage in the conditions of low environmental temperature. Based on the analysis of existing methods and constructions of powered lubrication devices for contact surfaces of engines, a design of a combined device has been suggested which unites the functions of hydraulic and heat accumulators. On the basis of the elaborated design, preparatory tests have been cond...

  18. Ionic liquids as lubricant additives: A review

    International Nuclear Information System (INIS)

    Zhou, Yan; Qu, Jun

    2016-01-01

    In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication with an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.

  19. Graphite and Hybrid Nanomaterials as Lubricant Additives

    Directory of Open Access Journals (Sweden)

    Zhenyu J. Zhang

    2014-04-01

    Full Text Available Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inorganic part is responsible for hardness. The relationship between the design parameters of the organic coatings, such as molecular architecture and the lubrication performance, however, remains to be fully elucidated. A survey of current understanding of hybrid nanoparticles as lubricant additives is presented in this review.

  20. Ionic Liquids as Novel Lubricants and /or Lubricant Additives

    Energy Technology Data Exchange (ETDEWEB)

    Qu, J. [ORNL; Viola, M. B. [General Motors Company

    2013-10-31

    This ORNL-GM CRADA developed ionic liquids (ILs) as novel lubricants or oil additives for engine lubrication. A new group of oil-miscible ILs have been designed and synthesized with high thermal stability, non-corrosiveness, excellent wettability, and most importantly effective anti-scuffing/anti-wear and friction reduction characteristics. Mechanistic analysis attributes the superior lubricating performance of IL additives to their physical and chemical interactions with metallic surfaces. Working with a leading lubricant formulation company, the team has successfully developed a prototype low-viscosity engine oil using a phosphonium-phosphate IL as an anti-wear additive. Tribological bench tests of the IL-additized formulated oil showed 20-33% lower friction in mixed and elastohydrodynamic lubrication and 38-92% lower wear in boundary lubrication when compared with commercial Mobil 1 and Mobil Clean 5W-30 engine oils. High-temperature, high load (HTHL) full-size engine tests confirmed the excellent anti-wear performance for the IL-additized engine oil. Sequence VID engine dynamometer tests demonstrated an improved fuel economy by >2% for this IL-additized engine oil benchmarked against the Mobil 1 5W-30 oil. In addition, accelerated catalyst aging tests suggest that the IL additive may potentially have less adverse impact on three-way catalysts compared to the conventional ZDDP. Follow-on research is needed for further development and optimization of IL chemistry and oil formulation to fully meet ILSAC GF-5 specifications and further enhance the automotive engine efficiency and durability.

  1. Using electronic surveys in nursing research.

    Science.gov (United States)

    Cope, Diane G

    2014-11-01

    Computer and Internet use in businesses and homes in the United States has dramatically increased since the early 1980s. In 2011, 76% of households reported having a computer, compared with only 8% in 1984 (File, 2013). A similar increase in Internet use has also been seen, with 72% of households reporting access of the Internet in 2011 compared with 18% in 1997 (File, 2013). This emerging trend in technology has prompted use of electronic surveys in the research community as an alternative to previous telephone and postal surveys. Electronic surveys can offer an efficient, cost-effective method for data collection; however, challenges exist. An awareness of the issues and strategies to optimize data collection using web-based surveys is critical when designing research studies. This column will discuss the different types and advantages and disadvantages of using electronic surveys in nursing research, as well as methods to optimize the quality and quantity of survey responses.

  2. Lubricant Test Methods for Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

    2008-01-01

    appearing in different sheet forming operations such as stretch forming, deep drawing, ironing and punching. The laboratory tests have been especially designed to model the conditions in industrial production. Application of the tests for evaluating new lubricants before introducing them in production has......Sheet metal forming of tribologically difficult materials such as stainless steel, Al-alloys and Ti-alloys or forming in tribologically difficult operations like ironing, punching or deep drawing of thick plate requires often use of environmentally hazardous lubricants such as chlorinated paraffin...... oils in order to avoid galling. The present paper describes a systematic research in the development of new, environmentally harmless lubricants focusing on the lubricant testing aspects. A system of laboratory tests has been developed to study the lubricant performance under the very varied conditions...

  3. Using Electronic Mail to Conduct Survey Research.

    Science.gov (United States)

    Thach, Liz

    1995-01-01

    Describes public and private online networks and the characteristics of electronic mail. Reviews the literature on survey research conducted via electronic mail, and examines the issues of design, implementation, and response. A table displays advantages and disadvantages of electronic mail surveys. (AEF)

  4. Research Methods in Healthcare Epidemiology: Survey and Qualitative Research.

    Science.gov (United States)

    Safdar, Nasia; Abbo, Lilian M; Knobloch, Mary Jo; Seo, Susan K

    2016-11-01

    Surveys are one of the most frequently employed study designs in healthcare epidemiology research. Generally easier to undertake and less costly than many other study designs, surveys can be invaluable to gain insights into opinions and practices in large samples and may be descriptive and/or be used to test associations. In this context, qualitative research methods may complement this study design either at the survey development phase and/or at the interpretation/extension of results stage. This methods article focuses on key considerations for designing and deploying surveys in healthcare epidemiology and antibiotic stewardship, including identification of whether or not de novo survey development is necessary, ways to optimally lay out and display a survey, denominator measurement, discussion of biases to keep in mind particularly in research using surveys, and the role of qualitative research methods to complement surveys. We review examples of surveys in healthcare epidemiology and antimicrobial stewardship and review the pros and cons of methods used. A checklist is provided to help aid design and deployment of surveys in healthcare epidemiology and antimicrobial stewardship. Infect Control Hosp Epidemiol 2016;1-6.

  5. Boundary lubrication of bearing steel in water-based lubricants with functional additives

    NARCIS (Netherlands)

    Wu, Y.

    2017-01-01

    This thesis focuses on the effect of additives on boundary lubrication of bearing steel for water-based lubrication systems. The oil-in-water (O/W) emulsion and the water-glycol based liquid were selected as the base fluids for research. Sulfur compounds, nitrogen heterocycles and graphene

  6. Compatibility of lubricant additives with HFC refrigerants and synthetic lubricants. Final report, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Cavestri, R.C. [Imagination Resources, Inc., Dublin, OH (United States)

    1997-07-01

    Part one of this research provides manufacturers of components of air-conditioning and refrigeration equipment with a useful list of lubricant additives, sources, functional properties and chemical species. The list in part one is comprised of domestic lubricant additive suppliers and the results of a literature search that was specifically targeted for additives reported to be useful in polyolester chemistry.

  7. Fundamentals of Friction and Vapor Phase Lubrication

    National Research Council Canada - National Science Library

    Gellman, Andrew

    2004-01-01

    This is the final report for the three year research program on "Fundamentals of Friction and Vapor Phase Lubrication" conducted at Carnegie Mellon with support from AFOSR grant number F49630-01-1-0069...

  8. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  9. A survey of big data research

    Science.gov (United States)

    Fang, Hua; Zhang, Zhaoyang; Wang, Chanpaul Jin; Daneshmand, Mahmoud; Wang, Chonggang; Wang, Honggang

    2015-01-01

    Big data create values for business and research, but pose significant challenges in terms of networking, storage, management, analytics and ethics. Multidisciplinary collaborations from engineers, computer scientists, statisticians and social scientists are needed to tackle, discover and understand big data. This survey presents an overview of big data initiatives, technologies and research in industries and academia, and discusses challenges and potential solutions. PMID:26504265

  10. Metal forming and lubrication

    DEFF Research Database (Denmark)

    Bay, Niels

    2000-01-01

    Lubrication is essential in most metal forming processes. The lubricant film has two basic functions, [1]: i. to separate the work piece and tool surfaces and ii. to cool the workpiece and the tool. Separation of the two surfaces implies lower friction facilitating deformation and lowering the tool...

  11. Lubrication method and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, R.S.

    1988-05-03

    In a combustion turbine engine comprising a bearing member journaling a rotatable component, and compressor means providing pressurized air, the method of providing liquid lubricant to the bearing member is described comprising the steps of: providing the liquid lubricant sealed within a collapsible and penetrable bladder member; enclosing the bladder member and lubricant within a substantially closed housing sealingly cooperating with the bladder member to define a pair of chambers; arranging a penetrating lance member in one of the pair of chambers in confronting relationship with the bladder member; providing communication of the pressurized air with the other of the pair of chambers to force the bladder member into impaled sealing relationship with the lance member; communicating the lubricant to the bearing member via the lance member; and utilizing the pressurized air within the other chamber to collapse the bladder member, simultaneously flowing the lubricant to the bearing member.

  12. [Research interest by general practitioners: a survey].

    Science.gov (United States)

    Rossi, S; Zoller, M; Steurer, J

    2006-12-06

    For doing research on topics in primary care medicine participation of primary care physicians is necessary. Research in this field of medicine is only marginally established in Switzerland. In a postal survey we evaluate the general attitudes of physicians towards research in the field of primary care. In particular we were interested in their willingness to participate in research projects and the facilitating and impeding factors to take part in such projects. A purpose designed questionnaire was sent by post to 3044 primary care physicians in the central and eastern parts of Switzerland. The return rate was 52%. A majority of 94% of the responding physicians revealed interest in primary care research and 60% of all responders are willing to participate actively in such projects. They are prepared to spend about 15 min a day for data acquisition. Their willingness to participate depends on the conditions that, first, the research topic is relevant for daily practice and, second, boards odder Continuous Medical Education credits for time spent for research. Time constraints, additional administrative work and lack of relevance of research topics to daily practice are the main barriers. This survey demonstrates the general interest of primary care physicians to participate in relevant research projects. Therefore the structure to set up such research should be established.

  13. Library Research Support in Queensland: A Survey

    Science.gov (United States)

    Richardson, Joanna; Nolan-Brown, Therese; Loria, Pat; Bradbury, Stephanie

    2012-01-01

    University libraries worldwide are reconceptualising the ways in which they support the research agenda in their respective institutions. This paper is based on a survey completed by member libraries of the Queensland University Libraries Office of Cooperation (QULOC), the findings of which may be informative for other university libraries. After…

  14. Biofluid lubrication for artificial joints

    Science.gov (United States)

    Pendleton, Alice Mae

    This research investigated biofluid lubrication related to artificial joints using tribological and rheological approaches. Biofluids studied here represent two categories of fluids, base fluids and nanostructured biofluids. Base fluids were studied through comparison of synthetic fluids (simulated body fluid and hyaluronic acid) as well as natural biofluids (from dogs, horses, and humans) in terms of viscosity and fluid shear stress. The nano-structured biofluids were formed using molecules having well-defined shapes. Understanding nano-structured biofluids leads to new ways of design and synthesis of biofluids that are beneficial for artificial joint performance. Experimental approaches were utilized in the present research. This includes basic analysis of biofluids' property, such as viscosity, fluid shear stress, and shear rate using rheological experiments. Tribological investigation and surface characterization were conducted in order to understand effects of molecular and nanostructures on fluid lubrication. Workpiece surface structure and wear mechanisms were investigated using a scanning electron microscope and a transmission electron microscope. The surface topography was examined using a profilometer. The results demonstrated that with the adding of solid additives, such as crown ether or fullerene acted as rough as the other solids in the 3-body wear systems. In addition, the fullerene supplied low friction and low wear, which designates the lubrication purpose of this particular particle system. This dissertation is constructed of six chapters. The first chapter is an introduction to body fluids, as mentioned earlier. After Chapter II, it examines the motivation and approach of the present research, Chapter III discusses the experimental approaches, including materials, experimental setup, and conditions. In Chapter IV, lubrication properties of various fluids are discussed. The tribological properties and performance nanostructured biofluids are

  15. Practical lubrication for industrial facilities

    CERN Document Server

    Bloch, Heinz

    2016-01-01

    Now completely revised and updated, this definitive, hands-on reference provides a comprehensive resource on the fundamental principles of lubricant application, what products are available, and which lubricants are most effective for specific applications. It also offers a detailed and highly practical discussion of lubrication delivery systems. You'll gain a clearer understanding of the "why" of relevant industrial lubrication practices, and, importantly, how these practices will facilitate optimized results. Lubricant applications covered include bearings and machine elements in earthbound

  16. Fuels and Lubricants Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Modern naval aircraft and turbine-powered craft require reliable and high-quality fuels and lubricants to satisfy the demands imposed upon them for top performance...

  17. Advanced lubrication systems and materials. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, S.

    1998-05-07

    This report described the work conducted at the National Institute of Standards and Technology under an interagency agreement signed in September 1992 between DOE and NIST for 5 years. The interagency agreement envisions continual funding from DOE to support the development of fuel efficient, low emission engine technologies in terms of lubrication, friction, and wear control encountered in the development of advanced transportation technologies. However, in 1994, the DOE office of transportation technologies was reorganized and the tribology program was dissolved. The work at NIST therefore continued at a low level without further funding from DOE. The work continued to support transportation technologies in the development of fuel efficient, low emission engine development. Under this program, significant progress has been made in advancing the state of the art of lubrication technology for advanced engine research and development. Some of the highlights are: (1) developed an advanced high temperature liquid lubricant capable of sustaining high temperatures in a prototype heat engine; (2) developed a novel liquid lubricant which potentially could lower the emission of heavy duty diesel engines; (3) developed lubricant chemistries for ceramics used in the heat engines; (4) developed application maps for ceramic lubricant chemistry combinations for design purpose; and (5) developed novel test methods to screen lubricant chemistries for automotive air-conditioning compressors lubricated by R-134a (Freon substitute). Most of these findings have been reported to the DOE program office through Argonne National Laboratory who manages the overall program. A list of those reports and a copy of the report submitted to the Argonne National Laboratory is attached in Appendix A. Additional reports have also been submitted separately to DOE program managers. These are attached in Appendix B.

  18. New Lubricants Protect Machines and the Environment

    Science.gov (United States)

    2007-01-01

    In 1994, NASA and Lockheed Martin Space Operations commissioned Sun Coast Chemicals of Daytona Inc to develop a new type of lubricant that would be safe for the environment and help "grease the wheels" of the shuttle-bearing launcher platform. Founded in 1989, Sun Coast Chemicals is known amongst the racing circuit for effective lubricants that help overcome engine and transmission problems related to heat and wear damage. In a matter of weeks, Sun Coast Chemical produced the biodegradable, high-performance X-1R Crawler Track Lube. In 1996, Sun Coast Chemical determined there was a market for this new development, and introduced three derivative products, Train Track Lubricant, Penetrating Spray Lubricant, and Biodegradable Hydraulic Fluid, and then quickly followed with a gun lubricant/cleaner and a fishing rod and reel lubricant. Just recently, Sun Coast introduced the X-1R Corporation, which folds the high-performance, environmentally safe benefits into a full line of standard automotive and specially formulated racing products. The entire X-1R automotive product line has stood up to rigorous testing by groups such as the American Society of Mechanical Engineers, the Swedish National Testing and Research Institute, the Department of Mechanical Engineering at Oakland University (Rochester, Michigan), and Morgan-McClure Motorsports (Abingdon, Virginia). The X-1R Corporation also markets "handy packs" for simple jobs around the house, consisting of a multi-purpose, multi-use lubricant and grease. In 2003, The X-1R Corporation teamed up with Philadelphia-based Penn Tackle Manufacturing Co., a leading manufacturer of fishing tackle since 1932, to jointly develop and market a line of advanced lubrication products for saltwater and freshwater anglers

  19. Lubrication and cartilage.

    Science.gov (United States)

    Wright, V; Dowson, D

    1976-02-01

    Mechanisms of lubrication of human synovial joints have been analysed in terms of the operating conditions of the joint, the synovial fluid and articular cartilage. In the hip and knee during a walking cycle the load may rise up to four times body weight. In the knee on dropping one metre the load may go up to 25 time body weight. The elastic modulus of cartilage is similar to that of the synthetic rubber of a car tyre. The cartilage surface is rough and in elderly specimens the centre line average is 2-75 mum. The friction force generated in reciprocating tests shows that both cartilage and synovial fluid are important in lubrication. The viscosity-shear rate relationships of normal synovial fluid show that it is non-Newtonian. Osteoarthrosic fluid is less so and rheumatoid fluid is more nearly Newtonian. Experiments with hip joints in a pendulum machine show that fluid film lubrication obtains at some phases of joint action. Boundary lubrication prevails under certain conditions and has been examined with a reciprocating friction machine. Digestion of hyaluronate does not alter the boundary lubrication, but trypsin digestion does. Surface active substances (lauryl sulphate and cetyl 3-ammonium bromide) give a lubricating ability similar to that of synovial fluid. The effectiveness of the two substances varies with pH.

  20. Towards green lubrication in machining

    CERN Document Server

    Liew Yun Hsien, Willey

    2014-01-01

    The book gives an overview of environmental friendly gaseous and vapour, refrigerated compressed gas, solid lubricant, mist lubrication, minimum quantity lubrication (MQL) and vegetable oils that can be used as lubricants and additives in industrial machining applications. This book introduces vegetable oils as viable and good alternative resources because of their environmental friendly, non-toxic and readily biodegradable nature.  The effectiveness of various types of vegetables oils as lubricants and additives in reducing wear and friction is discussed in this book. Engineers and scientist working in the field of lubrication and machining will find this book useful.

  1. Determination of Lubricant Bulk Modulus in Metal Forming by Means of a Simple Laboratory Test and Inverse FEM Analysis

    DEFF Research Database (Denmark)

    Hafis, S. M.; Christiansen, P.; Martins, P. A. F.

    2016-01-01

    The influence of workpiece surface topography on friction, lubrication and final surface equality in metal forming operations is well known and has been pointed out by many researchers.This is especially the case when liquid lubricants are applied in situations, where increased surface roughness ...... couples lubricant flow with plastic deformation of the metal directly. Results show that the proposed procedure allows determining an approximate bulk modulus for the lubricant.......The influence of workpiece surface topography on friction, lubrication and final surface equality in metal forming operations is well known and has been pointed out by many researchers.This is especially the case when liquid lubricants are applied in situations, where increased surface roughness...... facilitates the lubricant entrainment, pressurization and possible escape by micro-plasto-hydrodynamic lubrication. In order to model these mechanisms an important lubricant propertyd esignated as the bulk modulus is needed for characterizing the compressibility of the lubricant. The present paper describes...

  2. Research Resources Survey: Radiology Junior Faculty Development.

    Science.gov (United States)

    Krupinski, Elizabeth A; Votaw, John R

    2015-07-01

    To assess resources available to junior faculty in US academic radiology departments for research mentorship and funding opportunities and to determine if certain resources are more common in successful programs. An anonymous survey covering scientific environment and research mentorship and was sent to vice-chairs of research of radiology departments. Results were evaluated to identify practices of research programs with respect to mentorship, resources, and opportunities. Academy of Radiology Research's 2012 National Institutes of Health (NIH) grants and awards list was used to determine if environment and practices correlate with funding. There was a 51% response rate. A greater fraction of clinical faculty gets promoted from assistant to associate professor than research faculty. Research faculty overall submits more funding applications. Most programs support start-up costs and K-awards. Over half of the departments have a vice-chair for faculty development, and most have formal mentorship programs. Faculty members are expected to teach, engage in service, publish, and apply for and get research funding within 3 years of hire. Top-tier programs as judged by NIH awards have a combination of MDs who devote >50% effort to research and PhD faculty. Key factors holding back both clinical and research junior faculty development were motivation, resources, and time, although programs reported high availability of resources and support at the department level. Better marketing of resources for junior faculty, effort devoted to mentoring clinical faculty in research, and explicit milestones/expectations for achievement could enhance junior faculty success, promote interest in the clinician–scientist career path for radiologists, and lead to greater research success.

  3. Power system with an integrated lubrication circuit

    Science.gov (United States)

    Hoff, Brian D [East Peoria, IL; Akasam, Sivaprasad [Peoria, IL; Algrain, Marcelo C [Peoria, IL; Johnson, Kris W [Washington, IL; Lane, William H [Chillicothe, IL

    2009-11-10

    A power system includes an engine having a first lubrication circuit and at least one auxiliary power unit having a second lubrication circuit. The first lubrication circuit is in fluid communication with the second lubrication circuit.

  4. Glass transitions in lubricants - Its relation to elastohydrodynamic lubrication /EHD/

    Science.gov (United States)

    Alsaad, M.; Bair, S.; Sanborn, D. M.; Winer, W. O.

    1977-01-01

    A preliminary investigation into the possible role of glass transition and glassy state behavior of lubricants in EHD contacts is reported. Measurements of the glass transition of lubricants as a function of pressure by two methods are presented along with a discussion indicating possible implications of the results to EHD lubrication.

  5. Self-lubricating polymer composites : Tribology and interface

    NARCIS (Netherlands)

    Shen, Jintao

    2015-01-01

    In cooperation with SKF, this PhD project focus on the improvement of the tribological performance of self-lubricating composites for dry sliding bearings. Several novel self-lubricating composites with very good performance and low production cost is developed in this research, which perform better

  6. Surface effects in adhesion, friction, wear, and lubrication

    National Research Council Canada - National Science Library

    Buckley, Donald H

    1981-01-01

    ... for carbon bodies to improve their wear resistance in high altitude aircraft generator applications. Basic researchers found that moisture in the carbon was critical t o its lubrication. Therefore, the presence of moisture o n the surface of the carbon was important. With it present, the carbon lubricated very effectively and very low wear was ...

  7. Limits of Lubrication in

    DEFF Research Database (Denmark)

    Olsson, David Dam

    as delivered stainless steel surfaces implying microstructure changes in terms of larger ratio of closed lubricant pockets due to selective grain boundary etching. Strategic surfaces have also been created by macroscopic texturing using spherical indentations having a very small edge slope in order to promote...... by strategic surfaces in comparison to normal stainless steel surfaces implying a larger extent of bi-axial stretching. Numerical simulations have been applied in order to evaluate limits of lubrication in the simulative strip reduction based on predictions of critical parameters appearing in terms......-models corresponds well to experimental results in terms of lubricant film breakdown and subsequently pick-up development. Punching and blanking have been investigated regarding tribological conditions in case of using stainless steel workpiece materials. However, this has called for development of a new test method...

  8. Methodological Issues in Survey Research: A Historical Review

    NARCIS (Netherlands)

    de Heer, W.; de Leeuw, E.D.; van der Zouwen, J.

    1999-01-01

    In this paper, we present a historical overview of social surveys and describe the historical development of scientific survey methodology and survey statistics. The origins of survey research can be traced back to the early 19th century and the first scientiflc survey was conducted in England in

  9. Mixed Lubricated Line Contacts

    NARCIS (Netherlands)

    Faraon, I.C.

    2005-01-01

    The present work deals with friction in mixed lubricated line contacts. Components in systems are becoming smaller and due to, for instance power transmitted, partial contact may occur. In industrial applications, friction between the moving contacting surfaces cannot be avoided, therefore it is

  10. Additives for high-temperature liquid lubricants

    Science.gov (United States)

    Lawton, Emil A.; Yavrouian, Andre H.; Repar, John

    1988-01-01

    A preliminary research program was conducted to demonstrate a new concept for additives to liquid lubricants. It was demonstrated that suspensions of o-phthalonitrile and a substituted 1,2-maleonitrile in mineral oil and dilute solutions of o-phthalonitrile and tetrafluoro-o-phthalonitrile extended the lifetime of bearings under boundary lubricating conditions. The solutions exhibited coefficients of friction under high loads of 0.02-0.03. These results were consistent with the hypothesis that these compounds react with the hot metal surface to form a planar lubricating film by means of a metal or metal oxide template reaction. Also, the adherence was very strong due to the chelating action of the planar macrocycles postulated to form under the experimental conditions.

  11. Tribological performance of nanoparticles as lubricating oil additives

    Energy Technology Data Exchange (ETDEWEB)

    Gulzar, M., E-mail: mubashir-nustian@hotmail.com; Masjuki, H. H., E-mail: masjuki@um.edu.my; Kalam, M. A.; Varman, M.; Zulkifli, N. W. M. [University of Malaya, Department of Mechanical Engineering, Faculty of Engineering, Centre for Energy Sciences (Malaysia); Mufti, R. A. [National University of Sciences and Technology (NUST) (Pakistan); Zahid, Rehan [University of Malaya, Department of Mechanical Engineering, Faculty of Engineering, Centre for Energy Sciences (Malaysia)

    2016-08-15

    The prospect of modern tribology has been expanded with the advent of nanomaterial-based lubrication systems, whose development was facilitated by the nanotechnology in recent years. In literature, a variety of nanoparticles have been used as lubricant additives with potentially interesting friction and wear properties. To date, although there has been a great deal of experimental research on nanoparticles as lubricating oil additives, many aspects of their tribological behavior are yet to be fully understood. With growing number of possibilities, the key question is: what types of nanoparticles act as a better lubricating oil additive and why? To answer this question, this paper reviews main types of nanoparticles that have been used as lubricants additives and outlines the mechanisms by which they are currently believed to function. Significant aspects of their tribological behavior such as dispersion stability and morphology are also highlighted.

  12. Tribological performance of nanoparticles as lubricating oil additives

    International Nuclear Information System (INIS)

    Gulzar, M.; Masjuki, H. H.; Kalam, M. A.; Varman, M.; Zulkifli, N. W. M.; Mufti, R. A.; Zahid, Rehan

    2016-01-01

    The prospect of modern tribology has been expanded with the advent of nanomaterial-based lubrication systems, whose development was facilitated by the nanotechnology in recent years. In literature, a variety of nanoparticles have been used as lubricant additives with potentially interesting friction and wear properties. To date, although there has been a great deal of experimental research on nanoparticles as lubricating oil additives, many aspects of their tribological behavior are yet to be fully understood. With growing number of possibilities, the key question is: what types of nanoparticles act as a better lubricating oil additive and why? To answer this question, this paper reviews main types of nanoparticles that have been used as lubricants additives and outlines the mechanisms by which they are currently believed to function. Significant aspects of their tribological behavior such as dispersion stability and morphology are also highlighted.

  13. A preventive maintenance lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Chapaykina, S A; Ol' kov, P L; Pertsev, A N; Rodzevillo, I T; Rogacheva, O I; Zinov' yev, A P

    1980-02-15

    A method is disclosed to lower the adherence of materials by reducing the viscosity of a preventive maintenance lubricant against adhesion of moist, freeflowing materials, containing extract of selective cleaning of oil fractions and asphalt. Gas oil of catalytic cracking is added having a boiling point of 190-300 degrees, with the following ratio of components (%): selective cleaning extract, 43-50; asphalt, 14-16; and gas oil of catalytic cracking, the remainder, Treating a surface with the proposed lubricant lowers the specific resistance to shift of rock compared with the prototype (g/cm/sup 2/): sand (moisture content, 18%) from 3.82 to 1.55; and clay (moisture content 16%), from 5.41 to 3.51.

  14. Oil and natural gas technology review-lubrication and lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Moos, J

    1966-01-01

    A summary is presented of the advances made during 1967 in the following areas: production and transmission of natural gas; geosciences; drilling and production technology; secondary recovery; transportation by tanker, pipelines, and tank cars; storage; planning of refineries; control and automation; cracking and gasification of crude oil; separation and hydrogenation processes; petrochemicals; combustion technology; fuels and additives; air and water pollution control; production of lubricants; lubrication with mist, gas, and vapors; hydraulic fluids; lubricant additives; oxidation and aging of oils; greases; solid lubricants; bearings; machining; friction and wear; and changes in materials of construction. (220 refs.)

  15. Fault lubrication during earthquakes.

    Science.gov (United States)

    Di Toro, G; Han, R; Hirose, T; De Paola, N; Nielsen, S; Mizoguchi, K; Ferri, F; Cocco, M; Shimamoto, T

    2011-03-24

    The determination of rock friction at seismic slip rates (about 1 m s(-1)) is of paramount importance in earthquake mechanics, as fault friction controls the stress drop, the mechanical work and the frictional heat generated during slip. Given the difficulty in determining friction by seismological methods, elucidating constraints are derived from experimental studies. Here we review a large set of published and unpublished experiments (∼300) performed in rotary shear apparatus at slip rates of 0.1-2.6 m s(-1). The experiments indicate a significant decrease in friction (of up to one order of magnitude), which we term fault lubrication, both for cohesive (silicate-built, quartz-built and carbonate-built) rocks and non-cohesive rocks (clay-rich, anhydrite, gypsum and dolomite gouges) typical of crustal seismogenic sources. The available mechanical work and the associated temperature rise in the slipping zone trigger a number of physicochemical processes (gelification, decarbonation and dehydration reactions, melting and so on) whose products are responsible for fault lubrication. The similarity between (1) experimental and natural fault products and (2) mechanical work measures resulting from these laboratory experiments and seismological estimates suggests that it is reasonable to extrapolate experimental data to conditions typical of earthquake nucleation depths (7-15 km). It seems that faults are lubricated during earthquakes, irrespective of the fault rock composition and of the specific weakening mechanism involved.

  16. Boundary mode lubrication of articular cartilage by recombinant human lubricin.

    Science.gov (United States)

    Gleghorn, Jason P; Jones, Aled R C; Flannery, Carl R; Bonassar, Lawrence J

    2009-06-01

    Lubrication of cartilage involves a variety of physical and chemical factors, including lubricin, a synovial glycoprotein that has been shown to be a boundary lubricant. It is unclear how lubricin boundary lubricates a wide range of bearings from tissue to artificial surfaces, and if the mechanism is the same for both soluble and bound lubricin. In the current study, experiments were conducted to investigate the hypothesis that recombinant human lubricin (rh-lubricin) lubricates cartilage in a dose-dependent manner and that soluble and bound fractions of rh-lubricin both contribute to the lubrication process. An rh-lubricin dose response was observed with maximal lubrication achieved at concentrations of rh-lubricin greater than 50 microg/mL. A concentration-response variable-slope model was fit to the data, and indicated that rh-lubricin binding to cartilage was not first order. The pattern of decrease in equilibrium friction coefficient indicated that aggregation of rh-lubricin or steric arrangement may regulate boundary lubrication. rh-lubricin localized at the cartilage surface was found to lubricate a cartilage-glass interface in boundary mode, as did soluble rh-lubricin at high concentrations (150 microg/mL); however, the most effective lubrication occurred when both soluble and bound rh-lubricin were present at the interface. These findings point to two distinct mechanisms by which rh-lubricin lubricates, one mechanism involving lubricin bound to the tissue surface and the other involving lubricin in solution. Copyright 2008 Orthopaedic Research Society

  17. Cooling lubricants; Kuehlschmierstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Pfeiffer, W. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Breuer, D. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Blome, H. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Deininger, C. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Hahn, J.U. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Kleine, H. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Nies, E. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Pflaumbaum, W. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Stockmann, R. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Willert, G. [Berufsgenossenschaftliches Inst. fuer Arbeitssicherheit, St. Augustin (Germany); Sonnenschein, G. [Maschinenbau- und Metall-Berufsgenossenschaft, Duesseldorf (Germany)

    1996-08-01

    As a rule, the base substances used are certain liquid hydrocarbons from mineral oils as well as from native and synthetic oils. Through the addition of further substances the cooling lubricant takes on the particular qualities required for the use in question. Employees working with cooling lubricants are exposed to various hazards. The assessment of the concentrations at the work station is carried out on the basis of existing technical rules for contact with hazardous substances. However, the application/implementation of compulsory investigation and supervision in accordance with these rules is made difficult by the fact that cooling lubricants are, as a rule, made up of complicated compound mixtures. In addition to protecting employees from exposure to mists and vapours from the cooling lubricants, protection for the skin is also of particular importance. Cooling lubricants should not, if at all possible, be brought into contact with the skin. Cleansing the skin and skin care is just as important as changing working clothes regularly, and hygiene and cleanliness at the workplace. Unavoidable emissions are to be immediately collected at the point where they arise or are released and safely disposed of. This means taking into account all sources of emissions. The programme presented in this report therefore gives a very detailed account of the individual protective measures and provides recommendations for the design of technical protection facilities. (orig./MG) [Deutsch] Als Basisstoffe dienen in der Regel bestimmte fluessige Kohlenwasserstoffverbindungen aus Mineraloelen sowie aus nativen oder synthetischen Oelen. Durch die Zugabe von weiteren Stoffen erlangt der Kuehlschmierstoff seine fuer den jeweiligen Anwendungsabfall geforderten Eigenschaften. Beschaeftigte, die mit Kuehlschmierstoffen umgehen, sind unterschiedliche Gefahren ausgesetzt. Die Beurteilung der Kuehlschmierstoffkonzentrationen in der Luft am Arbeitsplatz erfolgt auf der Grundlage bestehender

  18. Cooperative Research Pilot Flatfish Survey (Yellowtail)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — An industry-based pilot flatfish survey of Georges Bank conducted aboard the F/V Mary K and the F/V Yankee Pride. The surveyed used a two-seam, two-bridle flounder...

  19. A survey of venture capital research

    NARCIS (Netherlands)

    Hellmann, T.; Puri, M.L.; Da Rin, M.; Constantinides, G.; Harris, M.; Stulz, R.

    2013-01-01

    This survey reviews the growing body of academic work on venture capital. It lays out the major data sources used. It examines the work on venture capital investments in companies, looking at issues of selection, contracting, post-investment services and exits. The survey considers recent work on

  20. A Survey of Venture Capital Research

    NARCIS (Netherlands)

    Da Rin, M.; Hellmann, T.; Puri, M.L.

    2011-01-01

    This survey reviews the growing body of academic work on venture capital. It lays out the major data sources used. It examines the work on venture capital investments in companies, looking at issues of selection, contracting, post-investment services and exits. The survey considers recent work on

  1. A Review of Ionic Liquid Lubricants

    Directory of Open Access Journals (Sweden)

    Anthony E. Somers

    2013-01-01

    Full Text Available Due to ever increasing demands on lubricants, such as increased service intervals, reduced volumes and reduced emissions, there is a need to develop new lubricants and improved wear additives. Ionic liquids (ILs are room temperature molten salts that have recently been shown to offer many advantages in this area. The application of ILs as lubricants in a diverse range of systems has found that these materials can show remarkable protection against wear and significantly reduce friction in the neat state. Recently, some researchers have shown that a small family of ILs can also be incorporated into non-polar base oils, replacing traditional anti-wear additives, with excellent performance of the neat IL being maintained. ILs consist of large asymmetrical ions that may readily adsorb onto a metal surface and produce a thin, protective film under boundary lubrication conditions. Under extreme pressure conditions, certain IL compounds can also react to form a protective tribofilm, in particular when fluorine, phosphorus or boron atoms are present in the constituent ions.

  2. Formulation of lubricating grease using Beeswax thickener

    Science.gov (United States)

    Suhaila, N.; Japar, A.; Aizudin, M.; Aziz, A.; Najib Razali, Mohd

    2018-04-01

    The issues on environmental pollution has brought the industries to seek the alternative green solutions for lubricating grease formulation. The significant challenges in producing modified grease are in which considering the chosen thickener as one of the environmental friendly material. The main purposes of the current research were to formulate lubricant grease using different types of base oils and to study the effect of thickener on the formulated lubricant grease. Used oil and motor oil were used as the base oils for the grease preparation. Beeswax and Damar were used as thickener and additive. The grease is tested based on its consistency, stability and oil bleeding. The prepared greases achieved grease consistency of grade 2 and 3 except for grease with unfiltered used oil. Grease formulated with used oil and synthetic oil tend to harden and loss its lubricating ability under high temperature compared to motor oil’ grease. Grease modification using environmental friendly thickener were successfully formulated but it is considered as a low temperature grease as the beeswax have low melting point of 62°C-65°C.

  3. Studies on micro plasto hydrodymic lubrication in metal forming

    DEFF Research Database (Denmark)

    Bay, Niels; Bech, Jakob Ilsted; Andreasen, Jan Lasson

    2002-01-01

    The influence of work piece surface topography on friction and lubrication and final surface quality in metal forming operations is well known and has been pointed out by many researchers, see Schey (1983) and Bay and Wanheim (1990). This is especially the case when liquid lubrication is applied...... characterization models the potential entrapment of a lubricant in closed reservoirs is used as a parameter to predetermine the formability of a sheet metal, Steinhoff et al. (1996), Geiger et al. (1997) and Schmoeckel et al. (1997). In experimental studies on friction in metal forming applying the strip drawing...

  4. Self lubricating fluid bearings

    International Nuclear Information System (INIS)

    Kapich, D.D.

    1980-01-01

    The invention concerns self lubricating fluid bearings, which are used in a shaft sealed system extending two regions. These regions contain fluids, which have to be isolated. A first seal is fluid tight for the first region between the carter shaft and the shaft. The second seal is fluid tight between the carter and the shaft, it communicates with the second region. The first fluid region is the environment surrounding the shaft carter. The second fluid region is a part of a nuclear reactor which contains the cooling fluid. The shaft is conceived to drive a reactor circulating and cooling fluid [fr

  5. Self-lubricating formula

    Energy Technology Data Exchange (ETDEWEB)

    Borzenko, V.A.; Koltovskiy, L.V.; Koshelyov, Yu.I.; Kuzovlyev, G.F.; Lebedyev, S.I.; Sitnikov, S.A.; Telegin, V.D.

    1979-12-30

    To improve operation of scrubbers that operate in crystallizers for deparaffinization of oil products, a formula is being suggested which contains siliceous fibers, and a type of thermoactive resin - phenol-formaldehyde laquer, with the following component ration (% weight): carbon fiber 20-25, siliceous fibers 20-30, dry lubricant 10-15, phenolformaldehyde laquer up to 100. Phys.-mech. characteristics are flexure, compression, Ak of the suggested and known compositions (kgs/cm/sup 2/) 2150-2450 and 2550-2700, 32-37 and 1750, 2150 and 27 operation resource 2100:2500 and 1400.

  6. Report of radioactivity survey research in fiscal year 1996

    International Nuclear Information System (INIS)

    1997-12-01

    In National Institute of Radiological Sciences, a survey was made on radioactivities in the environment due to the substances released from nuclear installations and radioactive fall-out brought out by nuclear explosion tests since 1959. As the marked progress of non-military utilization of nuclear energy the national concern on environmental radioactivity has been increasing in Japan and thus it has become more and more important to make a survey research of radioactivities, which might affect the environment and human health. In these situations, the institute attempted to make the following six surveys in the fiscal year of 1996; 'a survey on radioactive levels in environment, foods and human bodies', 'survey on the radioactive level in the regions around nuclear installations', 'works in radioactive data center', 'fundamental survey on the evaluation of the results from radioactivity survey', 'workshop for technical experts of environmental radioactivity monitoring' and 'survey research on the measurement and countermeasures for emergency exposure'. (M.N.)

  7. Report of radioactivity survey research in fiscal year 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    In National Institute of Radiological Sciences, a survey was made on radioactivities in the environment due to the substances released from nuclear installations and radioactive fall-out brought out by nuclear explosion tests since 1959. As the marked progress of non-military utilization of nuclear energy the national concern on environmental radioactivity has been increasing in Japan and thus it has become more and more important to make a survey research of radioactivities, which might affect the environment and human health. In these situations, the institute attempted to make the following six surveys in the fiscal year of 1997; `a survey on radioactive levels in environment, foods and human bodies`, `survey on the radioactive level in the regions around nuclear installations`, `works in radioactive data center`, `fundamental survey on the evaluation of the results from radioactivity survey`, `workshop for technical experts of environmental radioactivity monitoring` and `survey research on the measurement and countermeasures for emergency exposure`. (J.P.N.)

  8. 2010 Recruiting Benchmarks Survey. Research Brief

    Science.gov (United States)

    National Association of Colleges and Employers (NJ1), 2010

    2010-01-01

    The National Association of Colleges and Employers conducted its annual survey of employer members from June 15, 2010 to August 15, 2010, to benchmark data relevant to college recruiting. From a base of 861 employers holding organizational membership, there were 268 responses for a response rate of 31 percent. Following are some of the major…

  9. Synthetic lubricating oils

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Jurado, J

    1953-01-01

    A yellow solid petroleum paraffin d/sup 60/ 0.808, I number 3.5, average molecular weight 350, chlorinated and condensed with benzene, xylene, or naphthalene by the Friedel and Crafts reaction, in the presence of anhydrous AlCl/sub 3/ or activated Al, gave synthetic lubricating oils. Xylene was the preferred aromatic compound, naphthalene required the use of less completely chlorinated paraffin, benzene produced resins difficult to remove and gave darker oils with excessive green fluorescence. Activated Al rather than anhydrous AlCl/sub 3/ gave darker oils with higher viscosity and Conradson C values. Tar from the low-temperature distillation of lignite, used as a source of a paraffin fraction melting 40/sup 0/ to 48/sup 0/ (chlorinated to 26.5 percent Cl) and an aromatic fraction, 45 percent aromatic compounds by volume (mainly polysubstituted benzenes), I number 10, was converted to a similar synthetic lubricant with the following properties: Kinematic viscosity at 210/sup 0/ F., 50.4 centistokes; viscosity index, 92; Conradson C, 1.5 percent; solidification point, 9/sup 0/; S, 0.41 percent.

  10. survey research in practical theology and congregational studies

    African Journals Online (AJOL)

    such as the social, political and economic environment that influence society also affect the ... correlation research is part of a quantitative research methodology and could contribute to ... Another type is qualitative survey that focuses on the ...

  11. Ubiquitous Surveys Reveal Shallow Research Designs (Commentary).

    Science.gov (United States)

    McDaniel, Charles-Gene

    1990-01-01

    Criticizes the large amount of often irrelevant, poorly designed, and poorly written quantitative journalism research. Notes that journalism education and mass communication education research published in scholarly journals is largely ignored by professional journalists, who find more value in the qualitative research reported in the journalism…

  12. Survey Practices in Dental Education Research.

    Science.gov (United States)

    Creswell, John W.; Kuster, Curtis G.

    1983-01-01

    The use of mailed questionnaires in research on dental education is examined, and several factors that researchers should consider when reporting mailed questionnaire research to journal editors are identified. Examples from the "Journal of Dental Education" are used. (Author/MLW)

  13. Integrated Mechanical Pulse Jet Coolant Delivery System Performance for Minimal Quantity Lubrication

    OpenAIRE

    Nik Fazli Sapian; Badrul Omar; Mohd Hamdi Abd Shukor

    2010-01-01

    Minimum quantity lubrication (MQL) machining is one of the promising solutions to the requirement for decrease in cutting fluid consumption. This research describes MQL machining in a range of lubricant consumption 2.0ml/h, which is 10–100 times smaller than the consumption usually adopted in industries. MQL machining in this range is called pulse jet coolant delivery system in this research. A specially designed system was used for concentrating small amounts of lubricant onto the cutting in...

  14. The Stability of Lubricant Oil Acidity of Biogas Fuelled Engine due to Biogas Desulfurization

    Science.gov (United States)

    Gde Tirta Nindhia, Tjokorda; Wayan Surata, I.; Wardana, Ari

    2017-05-01

    This research is established for the purpose of the understanding the stability of the acidity of lubricant oil in biogas fuelled engine due to the absence of hydrogen sulfide (H2S). As was recognized that other than Methane (CH4), there are also other gas impurities in the biogas such as carbon dioxide (CO2), hydrogen sulfide (H2S), moisture (H2O) and ammonia (NH3). Due to H2S contents in the biogas fuel, the engine was found failure. This is caused by corrosion in the combustion chamber due to increase of lubricant acidity. To overcome this problem in practical, the lubricant is increased the pH to basic level with the hope will be decrease to normal value after several time use. Other method is by installing pH measurement sensor in the engine lubricant so that when lubricant is known turn to be acid, then lubricant replacement should be done. In this research, the effect of biogas desulfurization down to zero level to the acidity of lubricant oil in the four stroke engine was carried out with the hope that neutral lubrication oil to be available during running the engine. The result indicates that by eliminating H2S due desulfurization process, effect on stability and neutrality of pH lubricant. By this method the engine safety can be obtained without often replacement the lubricant oil.

  15. Genomics Research: World Survey of Public Funding

    Directory of Open Access Journals (Sweden)

    Cook-Deegan Robert M

    2008-10-01

    Full Text Available Abstract Background Over the past two decades, genomics has evolved as a scientific research discipline. Genomics research was fueled initially by government and nonprofit funding sources, later augmented by private research and development (R&D funding. Citizens and taxpayers of many countries have funded much of the research, and have expectations about access to the resulting information and knowledge. While access to knowledge gained from all publicly funded research is desired, access is especially important for fields that have broad social impact and stimulate public dialogue. Genomics is one such field, where public concerns are raised for reasons such as health care and insurance implications, as well as personal and ancestral identification. Thus, genomics has grown rapidly as a field, and attracts considerable interest. Results One way to study the growth of a field of research is to examine its funding. This study focuses on public funding of genomics research, identifying and collecting data from major government and nonprofit organizations around the world, and updating previous estimates of world genomics research funding, including information about geographical origins. We initially identified 89 publicly funded organizations; we requested information about each organization's funding of genomics research. Of these organizations, 48 responded and 34 reported genomics research expenditures (of those that responded but did not supply information, some did not fund such research, others could not quantify it. The figures reported here include all the largest funders and we estimate that we have accounted for most of the genomics research funding from government and nonprofit sources. Conclusion Aggregate spending on genomics research from 34 funding sources averaged around $2.9 billion in 2003 – 2006. The United States spent more than any other country on genomics research, corresponding to 35% of the overall worldwide public

  16. Friction and Lubrication of Large Tilting-Pad Thrust Bearings

    Directory of Open Access Journals (Sweden)

    Michał Wasilczuk

    2015-04-01

    Full Text Available Fluid film bearings have been extensively used in the industry because of their unbeatable durability and extremely low friction coefficient, despite a very low coefficient of friction dissipation of energy being noticeable, especially in large bearings. Lubricating systems of large tilting pad thrust bearings utilized in large, vertical shaft hydrogenerators are presented in this paper. A large amount of heat is generated due to viscous shearing of the lubricant large tilting pad thrust bearings, and this requires systems for forced cooling of the lubricant. In the dominant bath lubrication systems, cooling is realized by internal coolers or external cooling systems, with the latter showing some important advantages at the cost of complexity and also, potentially, lower reliability. Substantial losses in the bearings, reaching 1 MW in extreme cases, are a good motivation for the research and development aimed at reducing them. Some possible methods and their potential efficiency, along with some effects already documented, are also described in the paper.

  17. On the energy economics of air lubrication drag reduction

    Directory of Open Access Journals (Sweden)

    Simo A. Mäkiharju

    2012-12-01

    Full Text Available Air lubrication techniques for frictional drag reduction on ships have been proposed by numerous researchers since the 19th century. However, these techniques have not been widely adopted as questions persist about their drag reduction performance beyond the laboratory, as well as energy and economic cost-benefit. This paper draws on data from the literature to consider the suitability of air lubrication for large ocean going and U.S. Great Lakes ships, by establishing the basic energy economic calculations and presenting results for a hypothetical air lubricated ship. All the assumptions made in the course of the analysis are clearly stated so that they can be refined when considering application of air lubrication to a specific ship. The analysis suggests that, if successfully implemented, both air layer and partial cavity drag reduction could lead to net energy savings of 10 to 20%, with corresponding reductions in emissions.

  18. Influence of Cooling Lubricants on the Surface Roughness and Energy Efficiency of the Cutting Machine Tools

    Directory of Open Access Journals (Sweden)

    Jersák J.

    2017-08-01

    Full Text Available The Technical University of Liberec and Brandenburg University of Technology Cottbus-Senftenberg investigated the influence of cooling lubricants on the surface roughness and energy efficiency of cutting machine tools. After summarizing the achieved experimental results, the authors conclude that cooling lubricants extensively influence the cutting temperature, cutting forces and energy consumption. Also, it is recognizable that cooling lubricants affect the cutting tools lifetime and the workpiece surface quality as well. Furthermore, costs of these cooling lubricants and the related environmental burden need to be considered. A current trend is to reduce the amount of lubricants that are used, e.g., when the Minimum Quantity Lubrication (MQL technique is applied. The lubricant or process liquid is thereby transported by the compressed air in the form of an aerosol to the contact area between the tool and workpiece. The cutting process was monitored during testing by the three following techniques: lubricant-free cutting, cutting with the use of a lubricant with the MQL technique, and only utilizing finish-turning and finish-face milling. The research allowed the authors to monitor the cutting power and mark the achieved surface quality in relation to the electrical power consumption of the cutting machine. In conclusions, the coherence between energy efficiency of the cutting machine and the workpiece surface quality regarding the used cooling lubricant is described.

  19. Who sends the email? Using electronic surveys in violence research.

    Science.gov (United States)

    Sutherland, Melissa A; Amar, Angela F; Laughon, Kathryn

    2013-08-01

    Students aged 16-24 years are at greatest risk for interpersonal violence and the resulting short and long-term health consequences. Electronic survey methodology is well suited for research related to interpersonal violence. Yet methodological questions remain about best practices in using electronic surveys. While researchers often indicate that potential participants receive multiple emails as reminders to complete the survey, little mention is made of the sender of the recruitment email. The purpose of this analysis is to describe the response rates from three violence-focused research studies when the recruitment emails are sent from a campus office, researcher or survey sampling firm. Three violence-focused studies were conducted about interpersonal violence among college students in the United States. Seven universities and a survey sampling firm were used to recruit potential participants to complete an electronic survey. The sender of the recruitment emails varied within and across the each of the studies depending on institutional review boards and university protocols. An overall response rate of 30% was noted for the 3 studies. Universities in which researcher-initiated recruitment emails were used had higher response rates compared to universities where campus officials sent the recruitment emails. Researchers found lower response rates to electronic surveys at Historically Black Colleges or Universities and that other methods were needed to improve response rates. The sender of recruitment emails for electronic surveys may be an important factor in response rates for violence-focused research. For researchers identification of best practices for survey methodology is needed to promote accurate disclosure and increase response rates.

  20. Who Sends the Email? Using Electronic Surveys in Violence Research

    Directory of Open Access Journals (Sweden)

    Melissa A Sutherland

    2013-08-01

    Full Text Available Introduction: Students aged 16–24 years are at greatest risk for interpersonal violence and the resulting short and long-term health consequences. Electronic survey methodology is well suited for research related to interpersonal violence. Yet methodological questions remain about best practices in using electronic surveys. While researchers often indicate that potential participants receive multiple emails as reminders to complete the survey, little mention is made of the sender of the recruitment email. The purpose of this analysis is to describe the response rates from three violence-focused research studies when the recruitment emails are sent from a campus office, researcher or survey sampling firm. Methods: Three violence-focused studies were conducted about interpersonal violence among college students in the United States. Seven universities and a survey sampling firm were used to recruit potential participants to complete an electronic survey. The sender of the recruitment emails varied within and across the each of the studies depending on institutional review boards and university protocols.Results: An overall response rate of 30% was noted for the 3 studies. Universities in which researcher initiated recruitment emails were used had higher response rates compared to universities where campus officials sent the recruitment emails. Researchers found lower response rates to electronic surveys at Historically Black Colleges or Universities and that other methods were needed to improve response rates.Conclusion: The sender of recruitment emails for electronic surveys may be an important factor in response rates for violence-focused research. For researchers identification of best practices for survey methodology is needed to promote accurate disclosure and increase response rates. [West J Emerg Med. 2013;14(4:363–369.

  1. Basic Project Management Methodologies for Survey Researchers.

    Science.gov (United States)

    Beach, Robert H.

    To be effective, project management requires a heavy dependence on the document, list, and computational capability of a computerized environment. Now that microcomputers are readily available, only the rediscovery of classic project management methodology is required for improved resource allocation in small research projects. This paper provides…

  2. Oleoplaning droplets on lubricated surfaces

    Science.gov (United States)

    Daniel, Dan; Timonen, Jaakko V. I.; Li, Ruoping; Velling, Seneca J.; Aizenberg, Joanna

    2017-10-01

    Recently, there has been much interest in using lubricated surfaces to achieve extreme liquid repellency: a foreign droplet immiscible with the underlying lubricant layer was shown to slide off at a small tilt angle behaviour was hypothesized to arise from a thin lubricant overlayer film sandwiched between the droplet and solid substrate, but this has not been observed experimentally. Here, using thin-film interference, we are able to visualize the intercalated film under both static and dynamic conditions. We further demonstrate that for a moving droplet, the film thickness follows the Landau-Levich-Derjaguin law. The droplet is therefore oleoplaning--akin to tyres hydroplaning on a wet road--with minimal dissipative force and no contact line pinning. The techniques and insights presented in this study will inform future work on the fundamentals of wetting for lubricated surfaces and enable their rational design.

  3. Enhancing Field Research Methods with Mobile Survey Technology

    Science.gov (United States)

    Glass, Michael R.

    2015-01-01

    This paper assesses the experience of undergraduate students using mobile devices and a commercial application, iSurvey, to conduct a neighborhood survey. Mobile devices offer benefits for enhancing student learning and engagement. This field exercise created the opportunity for classroom discussions on the practicalities of urban research, the…

  4. Understanding Sample Surveys: Selective Learning about Social Science Research Methods

    Science.gov (United States)

    Currin-Percival, Mary; Johnson, Martin

    2010-01-01

    We investigate differences in what students learn about survey methodology in a class on public opinion presented in two critically different ways: with the inclusion or exclusion of an original research project using a random-digit-dial telephone survey. Using a quasi-experimental design and data obtained from pretests and posttests in two public…

  5. Retractions in cancer research: a systematic survey

    OpenAIRE

    Bozzo, Anthony; Bali, Kamal; Evaniew, Nathan; Ghert, Michelle

    2017-01-01

    Background The annual number of retracted publications in the scientific literature is rapidly increasing. The objective of this study was to determine the frequency and reason for retraction of cancer publications and to determine how journals in the cancer field handle retracted articles. Methods We searched three online databases (MEDLINE, Embase, The Cochrane Library) from database inception until 2015 for retracted journal publications related to cancer research. For each article, the re...

  6. A Survey of Campus Coordinators of Undergraduate Research Programs

    Science.gov (United States)

    Hensley, Merinda Kaye; Shreeves, Sarah L.; Davis-Kahl, Stephanie

    2015-01-01

    Interest in supporting undergraduate research programs continues to grow within academic librarianship. This article presents how undergraduate research program coordinators perceive and value library support of their programs. Undergraduate research coordinators from a variety of institutions were surveyed on which elements of libraries and…

  7. Report of radioactivity survey research in fiscal year 1989

    International Nuclear Information System (INIS)

    1990-12-01

    In the National Institute of Radiological Sciences, as a part of the radioactivity survey and research of Science and Technology Agency, the survey of environmental radioactivity level due to the radioactive fallout accompanying nuclear explosion experiments and the radioactive substances released from nuclear facilities and others and the safety analysis of these have been carried out. The radioactivity and dose survey for environment, foods and human bodies, the survey of the level around nuclear facilities, the business of radioactivity data center, the basic investigation for the evaluation of the results of radioactivity survey, the training of environmental radiation monitoring technicians and the investigation and research of the measurement of emergency radiation exposure and countermeasures were carried out. Those results are summarized. (K.I.)

  8. Mathematics without boundaries surveys in interdisciplinary research

    CERN Document Server

    Rassias, Themistocles

    2014-01-01

    This volume consists of chapters written by eminent scientists and engineers from the international community and presents significant advances in several theories, and applications of an interdisciplinary research. These contributions focus on both old and recent developments of Global Optimization Theory, Convex Analysis, Calculus of Variations, and Discrete Mathematics and Geometry, as well as several applications to a large variety of concrete problems, including  applications of computers  to the study of smoothness and analyticity of functions, applications to epidemiological diffusion, networks, mathematical models of elastic and piezoelectric fields, optimal algorithms, stability of neutral type vector functional differential equations, sampling and rational interpolation for non-band-limited signals, recurrent neural network for convex optimization problems, and experimental design.  The book also contains some review works, which could prove particularly useful for a broader audience of readers i...

  9. Environmental Survey preliminary report, Solar Energy Research Institute, Golden, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    1988-10-01

    This report presents the preliminary findings of the first phase of the Environmental Survey of the US Department of Energy's (DOE) Solar Energy Research Institute (SERI), conducted December 14 through 18, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. The team includes outside experts supplied by private contractors. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with SERI. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. The on-site phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SERI, and interviews with site personnel. 33 refs., 22 figs., 21 tabs.

  10. Pulsed Plasma Lubrication Device and Method

    Science.gov (United States)

    Hofer, Richard R. (Inventor); Bickler, Donald B. (Inventor); D'Agostino, Saverio A. (Inventor)

    2016-01-01

    Disclosed herein is a lubrication device comprising a solid lubricant disposed between and in contact with a first electrode and a second electrode dimensioned and arranged such that application of an electric potential between the first electrode and the second electrode sufficient to produce an electric arc between the first electrode and the second electrode to produce a plasma in an ambient atmosphere at an ambient pressure which vaporizes at least a portion of the solid lubricant to produce a vapor stream comprising the solid lubricant. Methods to lubricate a surface utilizing the lubrication device in-situ are also disclosed.

  11. Research Use in Education: An Online Survey of School Practitioners

    Science.gov (United States)

    Lysenko, Larysa V.; Abrami, Philip C.; Bernard, Robert M.; Dagenais, Christian

    2015-01-01

    This paper summarizes the results of a pan-Canadian online survey study that investigates the extent to which school practitioners (N = 1,153) use research to inform their practice. The self-reports indicate that the majority of the respondents used educational research, yet this engagement was infrequent. Although the respondents shared neutral…

  12. Hydroclimatic variability and predictability: a survey of recent research

    Directory of Open Access Journals (Sweden)

    R. D. Koster

    2017-07-01

    Full Text Available Recent research in large-scale hydroclimatic variability is surveyed, focusing on five topics: (i variability in general, (ii droughts, (iii floods, (iv land–atmosphere coupling, and (v hydroclimatic prediction. Each surveyed topic is supplemented by illustrative examples of recent research, as presented at a 2016 symposium honoring the career of Professor Eric Wood. Taken together, the recent literature and the illustrative examples clearly show that current research into hydroclimatic variability is strong, vibrant, and multifaceted.

  13. Top-of-Rail lubricant

    Energy Technology Data Exchange (ETDEWEB)

    Alzoubi, M. F.; Fenske, G. R.; Erck, R. A.; Boparai, A. S.

    2000-07-14

    Analysis of the volatile and semivolatile fractions collected after use of the TOR lubricant indicated that other than contaminants in the collection laboratory, no compounds on the EPA's Target Compound Lists (Tables 2 and 5) were detected in these fractions. The data of these qualitative analyses, given in the various tables in the text, indicate only the relative amounts of the tentatively identified compounds. The authors recommend that quantitative analysis be performed on the volatile and semivolatile fractions to allow confirmation of the tentatively identified compounds and to obtain absolute amounts of the detected compounds. Additionally, the semivolatile fraction should be analyzed by liquid chromatography/mass spectrometry to identify compounds that are not chromatographable under the temperature program used for determination of semivolatile compounds. Introducing the top-of-rail (TOR) lubricant into the wheel/rail interface results in a reduction of almost 60% of lateral friction force over the forces encountered under dry conditions. This reveals good potential for energy savings, as well as wear reduction, for railroad companies. In TOR lubrication, an increase in the angle of attack and axle load results in increased lateral friction and rate of lubricant consumption. The most efficient TOR lubricant quantity to be used in the wheel/rail interface must be calculated precisely according to the number of cars, axle loads, train speed, and angle of attack.

  14. Designing and conducting survey research a comprehensive guide

    CERN Document Server

    Rea, Louis M

    2014-01-01

    The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

  15. Corrosion protection of steel by thin coatings of starch-oil dry lubricants

    Science.gov (United States)

    Corrosion of materials is one of the most serious and challenging problems faced worldwide by industry. Dry lubricants reduce friction between two metal surfaces. This research investigated the inhibition of corrosive behavior a dry lubricant formulation consisting of jet-cooked corn starch and soyb...

  16. Development of lubricant test for punching and blanking

    DEFF Research Database (Denmark)

    Olsson, David Dam

    2001-01-01

    The background for development of new lubricants Requirements to lubricant test for punching Methods of evaluating lubricants Test equipment developed at DTU Conclusion.......The background for development of new lubricants Requirements to lubricant test for punching Methods of evaluating lubricants Test equipment developed at DTU Conclusion....

  17. A survey of etiologic hypotheses among testicular cancer researchers

    DEFF Research Database (Denmark)

    Stang, A; Trabert, B; Rusner, C

    2015-01-01

    Basic research results can provide new ideas and hypotheses to be examined in epidemiological studies. We conducted a survey among testicular cancer researchers on hypotheses concerning the etiology of this malignancy. All researchers on the mailing list of Copenhagen Testis Cancer Workshops...... and corresponding authors of PubMed-indexed articles identified by the search term 'testicular cancer' and published within 10 years (in total 2750 recipients) were invited to respond to an e-mail-based survey. Participants of the 8th Copenhagen Testis Cancer Workshop in May 2014 were subsequently asked to rate...... that scored as most plausible. We also present plans for improving the survey that may be repeated at a next international meeting of experts in testicular cancer. Overall 52 of 99 (53%) registered participants of the 8th Copenhagen Testis Cancer Workshop submitted the plausibility rating form. Fourteen of 27...

  18. A survey of research programs in radiation protection in Canada

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs.

  19. A survey of research programs in radiation protection in Canada

    International Nuclear Information System (INIS)

    1995-07-01

    A survey of research programs in Canada concerned with radiation protection was conducted in 1991-92 by the Joint Subcommittee on Regulatory Research (JSCRR) of the Atomic Energy Control Board (AECB) Advisory Committees on Radiological Protection and on Nuclear Safety. The purpose of this survey was to determine the current state of funding for this type of research in Canada. Funding for health-related radiation research in Canada is critical to establishing and maintaining a supply of trained professionals who can provide competent advice on health-related problems in radiation protection. The present report is an analysis of the information received in this survey. This survey concludes with the recommendation that the organization and definition of subprograms for the AECB Regulatory Research and Support Program should be completed as soon as possible. In this report the JSCRR should assist AECB staff in preparing a report in which priorities for research related to radiation protection are indicated. The sources of information noted at the end of the Discussion section of this report should be considered for this purpose. (author). 15 refs., 3 tabs

  20. Report of radioactivity survey research in fiscal year 1988

    International Nuclear Information System (INIS)

    1989-12-01

    The National Institute of Radiological Sciences has been surveyed, as part of the radioactivity research project by the Science and Technology Agency, radioactivity levels in the environment and safety analysis for radioactive fallouts associated with nuclear weapons tests since 1959 and effluents from nuclear installations. With a remarkable advent of the peaceful applications of radionuclides, radioactivity in the environment has been becoming a matter of concern for the population in Japan. Radioactivity research is considered to become more important because it may provide clues for the basis of its influences upon the human body and environment. This report gives a survey of the radioactivity research project performed in the fiscal year 1988. The following topics are covered: (1) radioactivity levels and dosimetry in the environment, foods, and human body; (2) radioactivity levels surrounding nuclear installations; (3) services in the Radioactivity Survey Data Center; (4) basic survey of evaluation for the results of radioactivity levels; (5) training of technichians for monitoring environmental radioactivity; and (6) survey research for dosimetry and countermeasures at emergency. (N.K.)

  1. Gresham’s Law of Surveys and Quality Standards in Survey Research

    Czech Academy of Sciences Publication Activity Database

    Krejčí, Jindřich

    2010-01-01

    Roč. 8, 7-8 (2010), s. 3-6 ISSN 1214-1720 R&D Projects: GA MŠk LA09010 Institutional research plan: CEZ:AV0Z70280505 Keywords : cross-national comparative research * social survey methods Subject RIV: AO - Sociology, Demography http://www.socioweb.cz/upl/editorial/download/181_pdf%202010%2007%2008.pdf

  2. Effect of an isotonic lubricant on sperm collection and sperm quality.

    Science.gov (United States)

    Agarwal, Ashok; Malvezzi, Helena; Sharma, Rakesh

    2013-05-01

    To assess the influence of an isotonic lubricant used during sperm sample collection on [1] ease of collection and [2] resultant sperm quality. Paired randomized cross-over design. Tertiary hospital. Healthy men over 18 years old with normal semen analysis as per World Health Organization 2010 guidelines. Collection of semen sample from 22 subjects by masturbation with or without the use of Pre-Seed personal lubricant. Qualitative survey results and quantitative sperm function outcomes were measured to determine resultant sperm quality and collection experience with and without Pre-Seed lubricant. The qualitative questionnaire results showed that 73% of donors prefer the semen collection process with the isotonic lubricant and 55% recommended the use of lubricant in their everyday collection. The motility, viability, membrane integrity, levels of reactive oxygen species, total antioxidant capacity, and percentage of DNA damage in collected semen samples were not affected by the use of the lubricant. More donors prefer, and find it easier, to collect semen samples with the use of the lubricant. The isotonic lubricant Pre-Seed did not compromise sperm quality as evaluated in an array of sperm assays, suggesting its safe use in fertility patients as required during sperm collection. Copyright © 2013 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  3. Numerical analysis of all flow state lubrication performance of water-lubricated thrust bearing

    International Nuclear Information System (INIS)

    Deng Xiao; Deng Liping; Huang Wei; Liu Lizhi; Zhao Xuecen; Liu Songya

    2015-01-01

    A model enabling all different flow state lubrication performance simulation and analysis for water-lubricated thrust bearing is presented, considering the temperature influence and elastic deformation. Lubrication state in the model is changed directly from laminar lubrication to turbulent lubrication once Reynolds number exceeds the critical Reynolds number. The model is numerically solved and results show that temperature variation is too little to influence the lubrication performance; the elastic deformation can slightly reduce the load carrying capacity of the thrust bearing; and the turbulent lubrication can remarkably improve the load carrying capacity. (authors)

  4. A new lubricant carrier for metal forming

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Bay, Niels; Tang, Peter Torben

    2009-01-01

    A lubricant carrier for metal forming processes is developed. Surfaces with pores of micrometer size for entrapping lubricant are generated by electrochemical deposition of an alloy, consisting of two immiscible metals, of which one metal subsequently is etched away leaving 5 mu m layers with a s...... extrusion at high reduction and excessive stroke comparing with conventionally lubrication using phosphate coating and soap....

  5. Solid lubricants in the power station

    International Nuclear Information System (INIS)

    Gaensheimer, J.

    1981-01-01

    Example application are first outlined, followed by descriptions of inorganic solid lubricants and plastics. Waxes, soaps and salts are discussed. Notes for usage are given. Solid lubricants in oils and greases are comprehensively described, followed by the sections entitled Solid lubricants for gearboxes . References to samples, tests, standards and bibliography make up the conclusion. (orig.) [de

  6. 21 CFR 880.6375 - Patient lubricant.

    Science.gov (United States)

    2010-04-01

    ... § 880.6375 Patient lubricant. (a) Identification. A patient lubricant is a device intended for medical... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Patient lubricant. 880.6375 Section 880.6375 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL...

  7. African primary care research: performing surveys using questionnaires.

    Science.gov (United States)

    Govender, Indiran; Mabuza, Langalibalele H; Ogunbanjo, Gboyega A; Mash, Bob

    2014-04-25

    The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on primary care research, with other articles in the series focusing on the structure of the research proposal and the literature review, as well as quantitative data analysis.

  8. A survey of etiologic hypotheses among testicular cancer researchers.

    Science.gov (United States)

    Stang, A; Trabert, B; Rusner, C; Poole, C; Almstrup, K; Rajpert-De Meyts, E; McGlynn, K A

    2015-01-01

    Basic research results can provide new ideas and hypotheses to be examined in epidemiological studies. We conducted a survey among testicular cancer researchers on hypotheses concerning the etiology of this malignancy. All researchers on the mailing list of Copenhagen Testis Cancer Workshops and corresponding authors of PubMed-indexed articles identified by the search term 'testicular cancer' and published within 10 years (in total 2750 recipients) were invited to respond to an e-mail-based survey. Participants of the 8th Copenhagen Testis Cancer Workshop in May 2014 were subsequently asked to rate the plausibility of the suggested etiologic hypotheses on a scale of 1 (very implausible) to 10 (very plausible). This report describes the methodology of the survey, the score distributions by individual hypotheses, hypothesis group, and the participants' major research fields, and discuss the hypotheses that scored as most plausible. We also present plans for improving the survey that may be repeated at a next international meeting of experts in testicular cancer. Overall 52 of 99 (53%) registered participants of the 8th Copenhagen Testis Cancer Workshop submitted the plausibility rating form. Fourteen of 27 hypotheses were related to exposures during pregnancy. Hypotheses with the highest mean plausibility ratings were either related to pre-natal exposures or exposures that might have an effect during pregnancy and in post-natal life. The results of the survey may be helpful for triggering more specific etiologic hypotheses that include factors related to endocrine disruption, DNA damage, inflammation, and nutrition during pregnancy. The survey results may stimulate a multidisciplinary discussion about new etiologic hypotheses of testicular cancer. Published 2014. This article is a U. S. Government work and is in the public domain in the USA.

  9. African Primary Care Research: Performing surveys using questionnaires

    OpenAIRE

    Govender, Indiran; Mabuza, Langalibalele H.; Ogunbanjo, Gboyega A.; Mash, Bob

    2014-01-01

    The aim of this article is to provide practical guidance on conducting surveys and the use of questionnaires for postgraduate students at a Masters level who are undertaking primary care research. The article is intended to assist with writing the methods section of the research proposal and thinking through the relevant issues that apply to sample size calculation, sampling strategy, design of a questionnaire and administration of a questionnaire. The articleis part of a larger series on pri...

  10. Practicalities of health survey fieldwork research in a resource ...

    African Journals Online (AJOL)

    Cite as: Abimanyi-Ochom J. Practicalities of health survey field work research in a resource limited setting: challenges and ... vided only ART while TASO provided social support in ..... first aid box in case of any minor accident but was limited.

  11. Mathematicians' Views on Current Publishing Issues: A Survey of Researchers

    Science.gov (United States)

    Fowler, Kristine K.

    2011-01-01

    This article reports research mathematicians' attitudes about and activity in specific scholarly communication areas, as captured in a 2010 survey of more than 600 randomly-selected mathematicians worldwide. Key findings include: (1) Most mathematicians have papers in the arXiv, but posting to their own web pages remains more common; (2) A third…

  12. Green Lubricants for Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels

    2010-01-01

    The increasing focus on legislation towards diminishing the impact on working environment as well as external environment has driven efforts to develop new, environmentally benign lubricants for metal forming. The present paper gives an overview of these efforts to substitute environmentally...

  13. Design and application on experimental platform for high-speed bearing with grease lubrication

    Directory of Open Access Journals (Sweden)

    He Qiang

    2015-12-01

    Full Text Available The experimental platform for high-speed grease is an important tool for research and development of high-speed motorized spindle with grease lubrication. In this article, the experimental platform for high-speed grease is designed and manufactured which consists of the drive system, the test portion, the loading system, the lubrication system, the control system, and so on. In the meantime, the high-speed angular contact ceramic ball bearings B7005C/HQ1P4 as the research object are tested and contrasted in the grease lubrication and oil mist lubrication. The experimental platform performance is validated by contrast experiment, and the high-speed lubricated bearing performance is also studied especially in the relationship among the rotating speed,load and temperature rise. The results show that the experimental platform works steadily, accurate, and reliable in the experimental testing. And the grease lubrication ceramic ball bearings B7005C/HQ1P4 can be used in high-speed motorized spindle in the circular water cooling conditions when the rotating speed is lower than 40,000 r/min or the DN value (the value of the bearing diameter times the rotating speed is lower than the 1.44 × 106 mm r/min. Grease lubrication instead of oil mist lubrication under high-speed rotating will simplify the structure design of the high-speed motorized spindle and reduce the pollution to the environment.

  14. Self lubrication of bitumen froth in pipelines

    International Nuclear Information System (INIS)

    Joseph, D.D.

    1997-01-01

    In this paper I will review the main properties of water lubricated pipelines and explain some new features which have emerged from studies of self-lubrication of Syncrudes' bitumen froth. When heavy oils are lubricated with water, the water and oil are continuously injected into a pipeline and the water is stable when in a lubricating sheath around the oil core. In the case of bitumen froth obtained from the Alberta tar sands, the water is dispersed in the bitumen and it is liberated at the wall under shear; water injection is not necessary because the froth is self-lubricating

  15. IUTAM Symposium on Lubricated Transport of Viscous Materials

    CERN Document Server

    1998-01-01

    The main objective of the First International Symposium on Lubricated Transport of Viscous Materials was to bring together scientists and engineers from academia and industryto discuss current research work and exchange ideas in this newly emerging field. It is an area offluid dynamics devoted to laying bare the principlesofthe lubricated transport of viscous materials such as crude oil, concentrated oil/water emulsion, slurries and capsules. It encompasses several types of problem. Studies of migration of particulates away from walls, Segre-Silverberg effects, lubrication versus lift and shear-induced migration belong to one category. Some of the technological problems are the fluid dynamics ofcore flows emphasizing studies ofstability, problems of start-up, lift-off and eccentric flow where gravity causes the core flow to stratify. Another category of problems deals with the fouling of pipe walls with oil, with undesirable increases in pressure gradients and even blocking. This study involves subjects like ...

  16. Testing of Lubricant Performance in Sheet Metal Forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Friis, Kasper Leth

    2008-01-01

    Increasing focus on environmental issues in industrial production has urged a number of sheet metal forming companies to look for new tribo-systems in order to substitute hazardous lubricants such as chlorinated paraffin oils. The problems are especially pronounced, when forming tribologically...... of the lubricant film causing pick-up of work piece material on the tool surface and scoring of subsequent work piece surfaces. The present paper gives an overview of more than 10 years work by the authors’ research group through participation in national as well as international framework programmes on developing...

  17. Rock-Mechanics Research. A Survey of United States Research to 1965, with a Partial Survey of Canadian Universities.

    Science.gov (United States)

    National Academy of Sciences - National Research Council, Washington, DC.

    The results of a survey, conducted by the Committee on Rock Mechanics, to determine the status of training and research in rock mechanics in presented in this publication. In 1964 and 1965 information was gathered by questionnaires sent to industries, selected federal agencies, and universities in both the United States and Canada. Results are…

  18. Lubrication of the Human Ankle Joint in Walking

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Miroslav

    2010-01-01

    Roč. 132, č. 1 (2010), s. 1-8 ISSN 0742-4787 R&D Projects: GA ČR(CZ) GA103/07/0043 Institutional research plan: CEZ:AV0Z20710524 Keywords : articular cartilage * human ankle joint * lubrication * walking Subject RIV: JJ - Other Materials Impact factor: 0.449, year: 2010

  19. Lubrication of the human ankle joint in running

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Miroslav

    2009-01-01

    Roč. 3, č. 5 (2009), s. 619-626 ISSN 1970-8734 R&D Projects: GA ČR(CZ) GA103/07/0043 Institutional research plan: CEZ:AV0Z20710524 Keywords : human ankle joint * lubrication * running Subject RIV: JJ - Other Materials

  20. Progress in Tribological Properties of Nano-Composite Hard Coatings under Water Lubrication

    Directory of Open Access Journals (Sweden)

    Qianzhi Wang

    2017-02-01

    Full Text Available The tribological properties, under water-lubricated conditions, of three major nano-composite coatings, i.e., diamond-like carbon (DLC or a-C, amorphous carbon nitride (a-CNx and transition metallic nitride-based (TiN-based, CrN-based, coatings are reviewed. The influences of microstructure (composition and architecture and test conditions (counterparts and friction parameters on their friction and wear behavior under water lubrication are systematically elucidated. In general, DLC and a-CNx coatings exhibit superior tribological performance under water lubrication due to the formation of the hydrophilic group and the lubricating layer with low shear strength, respectively. In contrast, TiN-based and CrN-based coatings present relatively poor tribological performance in pure water, but are expected to present promising applications in sea water because of their good corrosion resistance. No matter what kind of coatings, an appropriate selection of counterpart materials would make their water-lubricated tribological properties more prominent. Currently, Si-based materials are deemed as beneficial counterparts under water lubrication due to the formation of silica gel originating from the hydration of Si. In the meantime, the tribological properties of nano-composite coatings in water could be enhanced at appropriate normal load and sliding velocity due to mixed or hydrodynamic lubrication. At the end of this article, the main research that is now being developed concerning the development of nano-composite coatings under water lubrication is described synthetically.

  1. Treatment of Waste Lubricating Oil by Chemical and Adsorption Process Using Butanol and Kaolin

    Science.gov (United States)

    Riyanto; Ramadhan, B.; Wiyanti, D.

    2018-04-01

    Treatment of waste lubricating oil by chemical and adsorption process using butanol and kaolin has been done. Quality of lubricating oil after treatment was analysis using Atomic Absorption Spectrophotometer (AAS) and Gas Chromatography-Mass Spectrometry (GC-MS). The effects of the treatment of butanol, KOH, and kaolin to metals contain in waste lubricating oil treatment have been evaluated. Treatment of waste lubricating oil has been done using various kaolin weight, butanol, and KOH solution. The result of this research show metal content of Ca, Mg, Pb, Fe and Cr in waste lubricating oil before treatment are 1020.49, 367.02, 16.40, 36.76 and 1,80 ppm, respectively. The metal content of Ca, Mg, Pb, Fe and Cr in the waste lubricating oil after treatment are 0.17, 9.85, 34.07, 78.22 and 1.20 ppm, respectively. The optimum condition for treatment of waste lubricating oil using butanol, KOH, and kaolin is 30 mL, 3.0 g and 1.5 g, respectively. Chemical and adsorption method using butanol and kaolin can be used for decrease of metals contain in waste lubricating oil.

  2. Report on a survey in fiscal 1999. Survey on research exchange possibility; 1999 nendo kenkyu koryu kanosei chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This survey deals with research institutions of governmental organizations, universities, and business entities for the purpose of discussing the possibility of research exchange standing on a long-term point of view to serve for solving global environment problems, and the way the exchange should be. The research exchange shall cover the areas of trends in research and development of global environment related technologies, themes for the research and development, institutions for the research and development, and exchange of researchers and information with these research organizations. In fiscal 1999, three survey missions were dispatched to cover the following three areas: (1) surveys on research possibility of catalyst development by means of combinatorial chemistry, (2) surveys on research exchange possibility for thermo-chemical solar hybrid fuel production technologies, and (3) surveys on research exchange possibility for structuring function improving technologies of the 21st century type. Each survey mission has visited research institutions of the world to survey the trends in researches related to global environment, and the possibility of exchanging researches with RITE. The visits presented the following conclusions and findings: (1) the research on the combinatorial chemistry in the U.S.A. is still in the initial stage; (2) important findings were obtained when surveys were made on methane reformation utilizing solar heat, and coal gasification technologies in Europe; and (3) surveys were made on pioneering researches on plant molecule physiology in Europe. (NEDO)

  3. The European Social Survey and European research policy

    DEFF Research Database (Denmark)

    Kropp, Kristoffer

    2017-01-01

    This article analyses the history of the European Social Survey (ESS) and its relationship to changes in European research policy, using Bourdieu’s field-analytical approach. It argues that the success of the ESS relied on three interwoven processes that we can understand theoretically in terms...... of the establishment of homological structures and the formation of conjunctural alliances between the field of European social-scientific research and the field of European policy. The three interwoven processes that I depict are: first, the production of a European field of social research, connected to both...... European and national scientific institutions; second, the establishment of European Union (EU) institutions and organisations that were able to identify and link up with social researchers; and third, the formation of conjunctural alliances between the two fields (social science and EU research policy...

  4. Survey of Four Decades of Addiction Prevalence Researches in Iran

    Directory of Open Access Journals (Sweden)

    Hamid Sarrami

    2013-07-01

    Full Text Available Objective: The main aim of this research is the survey of addiction and drug abuse and psychotropic drugs prevalence researches which have been done in our country in last decades Method: To do this research all addiction and drug abuse prevalence researches that have been taken place were collected and analyzed. Results: the results of the researches show that the statistics of addiction has been in an oscillation as in 1390, the survey in 15 to 64 years old people (according to 1385 census that is 50 million people, is equal to one million and three hundred thousand and twenty five persons. Conclusion: the results of the four decades of addiction prevalence in Iran show that in according to the size of the threat of drugs and psychotropic drugs and addiction prevalence and also the change of gender, matrimony, age, job and the level of addicts education, less attention has been given to the drug abuse prevalence researches in public, youngsters, students and governmental and governmental non- officials.

  5. Nationwide survey on barriers for dental research in India

    Directory of Open Access Journals (Sweden)

    Kundendu Arya Bishen

    2015-01-01

    Full Text Available Objective: Research in the dental field is progressing at mightier speed worldwide, but an unfortunately representation of India at this platform is negligible. The present study was undertaken to unearth the barriers for dental research among dental professionals in Indian scenario. Materials and Methods: A cross-sectional questionnaire study was conducted on 1514 participant′s (Master of Dental Surgery and Bachelor of Dental Surgery staff and postgraduates in 40 dental colleges of India selected by multistage random sampling. The response rate was 75.7%. The survey was undertaken from July 2013 to December 2013. The survey instrument was 24-item, investigator developed, self-structured, close-ended, and self-administered questionnaire grouped into four categories that are, institutional/departmental support related barriers, financial/training support related barriers, time-related barriers, and general barriers. Results: Among all respondents 47.23% informed that they are administrative and educational work rather than research work as (P < 0.001. Overall 57.53% of study participants reported lack of administrative and technical support for research work as (P < 0.001. Overall 64.9% reported meager college funding was the barrier (P < 0.001. Overall 61.5% respondents reported lack of time to do research work due to clinical and teaching responsibilities (P < 0.001 was the barrier for research. Largely 80.25% agreed that, the lack of documentation and record maintenance are an obvious barrier for research (P < 0.001. Conclusions: Present study unearths certain barriers for research in an Indian scenario, which includes administrative overburden, lack of funds, and lack of documentation of the dental data. Governing authorities of dentistry in India have to make major interventions to make research non-intensive environment to research-friendly environment.

  6. Environmental survey at Lucas Heights Research Laboratories, 1993

    International Nuclear Information System (INIS)

    Hoffmann, E.L.; Looz, T.

    1995-04-01

    Results are presented of the environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1993. No activity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne discharges during this period is estimated to be less than 0.01 mSv, which is one per cent of the dose limit for long term exposure that is recommended by the National Health and Medical Research Council. A list of previous environmental survey reports is attached. 22 refs., 21 tabs., 4 figs

  7. Identifying lubricant options for compressor bearing designs

    Science.gov (United States)

    Karnaz, J.; Seeton, C.; Dixon, L.

    2017-08-01

    Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

  8. Measuring Substance Use and Misuse via Survey Research: Unfinished Business.

    Science.gov (United States)

    Johnson, Timothy P

    2015-01-01

    This article reviews unfinished business regarding the assessment of substance use behaviors by using survey research methodologies, a practice that dates back to the earliest years of this journal's publication. Six classes of unfinished business are considered including errors of sampling, coverage, non-response, measurement, processing, and ethics. It may be that there is more now that we do not know than when this work began some 50 years ago.

  9. Survey of domestic research on superconducting magnetic energy storage

    International Nuclear Information System (INIS)

    Dresner, L.

    1991-09-01

    This report documents the results of a survey of domestic research on superconducting magnetic energy storage (SMES) undertaken with the support of the Oak Ridge National Laboratory (ORNL) Superconductivity Pilot Center. Each survey entry includes the following: Name, address, and other telephone and facsimile numbers of the principal investigator and other staff members; funding for fiscal year 1991, 1992, 1993; brief descriptions of the program, the technical progress to date, and the expected technical progress; a note on any other collaboration. Included with the survey are recommendations intended to help DOE decide how best to support SMES research and development (R ampersand D). To summarize, I would say that important elements of a well-rounded SMES research program for DOE are as follows. (1) Construction of a large ETM. (2) Development of SMES as an enabling technology for solar and wind generation, especially in conjunction with the ETM program, if possible. (3) Development of small SMES units for electric networks, for rapid transit, and as noninterruptible power supplies [uses (2), (3), and (4) above]. In this connection, lightweight, fiber-reinforced polymer structures, which would be especially advantageous for space and transportation applications, should be developed. (4) Continued study of the potential impacts of high-temperature superconductors on SMES, with construction as soon as feasible of small SMES units using high-temperature superconductors (HTSs)

  10. Environmental survey at Lucas Heights Research Laboratories, 1989

    International Nuclear Information System (INIS)

    Hoffman, E.L.; Arthur, J.

    1990-09-01

    Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1989. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 9 refs., 17 tabs., 2 figs

  11. Environmental survey at Lucas Heights Research Laboratories, 1990

    International Nuclear Information System (INIS)

    Hoffmann, E.L.

    1991-10-01

    Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1990. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 11 refs., 16 tabs., 2 figs

  12. Environmental survey at Lucas Heights Research Laboratories, 1987

    International Nuclear Information System (INIS)

    Giles, M.S.; Foy, J.J.; Hoffmann, E.L.

    1989-12-01

    Results are presented of an environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1987. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorized limits. The maximum possible annual dose to the general public from airborne waste during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council. 9 refs., 18 tabs., 2 figs

  13. Environmental survey at Lucas Heights Research Laboratories, 1984

    International Nuclear Information System (INIS)

    Giles, M.S.; Dudaitis, A.

    1986-12-01

    Results are presented of the environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1984. These results are satisfactory. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste discharges during this period is estimated to be less than 0.01 millisieverts, which is one per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council

  14. Environmental survey at the Lucas Heights Research Laboratories. 1983

    International Nuclear Information System (INIS)

    Giles, M.S.; Dudaitis, A.

    1985-12-01

    Results are presented of the environmental survey conducted in the neighbourhood of the Lucas Heights Research Laboratories during 1983. These results are satisfactory. No radioactivity which could have originated from these laboratories was found in samples collected from possible human food chains. All low-level liquid and gaseous waste discharges were within authorised limits. The maximum possible annual dose to the general public from airborne waste discharges during this period is estimated to be less than 0.01 millisieverts, which is 1 per cent of the limit for long-term exposure that is recommended by the National Health and Medical Research Council

  15. Orthopaedic nurses' perception of research utilization - A cross sectional survey

    DEFF Research Database (Denmark)

    Berthelsen, Connie Bøttcher; Hølge-Hazelton, Bibi

    2015-01-01

    The call for evidence-based knowledge in clinical nursing practice has increased during recent decades and research in orthopaedic nursing is needed to improve patients' conditions, care and treatment. A descriptive cross-sectional survey was conducted to determine the self-perceived theoretical....... The results indicated that despite the majority of orthopaedic nurses having low self-perceived theoretical knowledge and practical research competencies, their interest and motivation to improve these were high, especially their inner motivation. However, the nurses' inner motivation was inhibited by a lack...

  16. Single Common Powertrain Lubricant Development

    Science.gov (United States)

    2012-01-01

    this particular shortcoming of the current MIL specification lubricant lineup . Perameter: Units: Average Std. Dev. Average Std. Dev. Average...variations of each 0.2-second time block of all engagements. Test Number The run number listed on this report is a random number and is not sequential ...is not sequential . Only SwRI® can link this run number to JDQ-96, L0254054, August 3, 2010. Page 2 of3 John Deere JDQ-96 Performed using 1400

  17. Solid Lubricated Rolling Element Bearings

    Science.gov (United States)

    1979-02-15

    lubricant into uneven patches of varnish . This varnish , along with the file-like action of the exposed ball carbides on the relatively softer races, can...its structure. Fluorine , one of the most reactive elements, reacts with graphite without combustion from about 790’F to 1022°F, forming a grey-colored...to allow for molding and machining after molding. 0 Method 2 (Hughes) Impregnating these dense weaves with a Thermid 600 polyimide varnish

  18. Transition to thermohydrodynamic lubrication problem

    Czech Academy of Sciences Publication Activity Database

    Ciuperca, I. S.; Feireisl, Eduard; Jai, M.; Petrov, A.

    2017-01-01

    Roč. 75, č. 3 (2017), s. 391-414 ISSN 0033-569X EU Projects: European Commission(XE) 320078 - MATHEF Institutional support: RVO:67985840 Keywords : free boundary problems * lubrication * asymptotic approach * Stokes equation Subject RIV: BA - General Mathematics OBOR OECD: Pure mathematics Impact factor: 0.788, year: 2016 http://www.ams.org/journals/qam/2017-75-03/S0033-569X-2017-01468-X/

  19. Used lubricants and ecological problems

    International Nuclear Information System (INIS)

    Evdokimov, A.Yu.; Dzhamalov, A.A.; Lashkhi, V.L.

    1993-01-01

    This planet is undergoing a severe ecological crisis. The consequent problems include not only how to prevent the destruction of contemporary civilization, but also how to preserve mankind as a biological species. In the onset of this crisis, used lubricants (ULs) play a role that is by no means the least important. Every year, the worldwide discharge of petroleum products to the biosphere is approximately 6 million tonnes, of which more than 50% consists of ULs. The ecologically dangerous components of both commercial lubricants and used lubricants are the polycyclic aromatic hydrocarbons (PAHs) that are originally present in crude oil; polyhalobiphenyls, mainly polychlorobiphenyls (PCBs) of anthropogenic origin; sulfur- and chlorine-containing additives; a number of biocides; organic compounds of metals (lead, barium, antimony, zinc); and nitrites. These substances are distributed in the atmosphere, water, and soil, entering the food chain and appearing in foodstuffs. Moreover, hydrocarbons of petroleum and synthetic oils with a low degree of biodegradability (10-30%) accumulate in the environment and may shift the ecological equilibrium (accelerated multiplication and mutation of microorganisms that assimilate petroleum products). 32 refs., 1 fig

  20. Influence of lubrication forces in direct numerical simulations of particle-laden flows

    Science.gov (United States)

    Maitri, Rohit; Peters, Frank; Padding, Johan; Kuipers, Hans

    2016-11-01

    Accurate numerical representation of particle-laden flows is important for fundamental understanding and optimizing the complex processes such as proppant transport in fracking. Liquid-solid flows are fundamentally different from gas-solid flows because of lower density ratios (solid to fluid) and non-negligible lubrication forces. In this interface resolved model, fluid-solid coupling is achieved by incorporating the no-slip boundary condition implicitly at particle's surfaces by means of an efficient second order ghost-cell immersed boundary method. A fixed Eulerian grid is used for solving the Navier-Stokes equations and the particle-particle interactions are implemented using the soft sphere collision and sub-grid scale lubrication model. Due to the range of influence of lubrication force on a smaller scale than the grid size, it is important to implement the lubrication model accurately. In this work, different implementations of the lubrication model on particle dynamics are studied for various flow conditions. The effect of a particle surface roughness on lubrication force and the particle transport is also investigated. This study is aimed at developing a validated methodology to incorporate lubrication models in direct numerical simulation of particle laden flows. This research is supported from Grant 13CSER014 of the Foundation for Fundamental Research on Matter (FOM), which is part of the Netherlands Organisation for Scientific Research (NWO).

  1. Barriers to Implementing Treatment Integrity Procedures in School Psychology Research: Survey of Treatment Outcome Researchers

    Science.gov (United States)

    Sanetti, Lisa M. Hagermoser; DiGennaro Reed, Florence D.

    2012-01-01

    Treatment integrity data are essential to drawing valid conclusions in treatment outcome studies. Such data, however, are not always included in peer-reviewed research articles in school psychology or related fields. To gain a better understanding of why treatment integrity data are lacking in the school psychology research, we surveyed the…

  2. Engaging Students in Survey Research Projects across Research Methods and Statistics Courses

    Science.gov (United States)

    Lovekamp, William E.; Soboroff, Shane D.; Gillespie, Michael D.

    2017-01-01

    One innovative way to help students make sense of survey research has been to create a multifaceted, collaborative assignment that promotes critical thinking, comparative analysis, self-reflection, and statistical literacy. We use a short questionnaire adapted from the Higher Education Research Institute's Cooperative Institutional Research…

  3. Slippery self-lubricating polymer surfaces

    Science.gov (United States)

    Aizenberg, Joanna; Aizenberg, Michael; Cui, Jiaxi; Dunn, Stuart; Hatton, Benjamin; Howell, Caitlin; Kim, Philseok; Wong, Tak Sing; Yao, Xi

    2018-05-08

    The present disclosure describes a strategy to create self-healing, slippery self-lubricating polymers. Lubricating liquids with affinities to polymers can be utilized to get absorbed within the polymer and form a lubricant layer (of the lubricating liquid) on the polymer. The lubricant layer can repel a wide range of materials, including simple and complex fluids (water, hydrocarbons, crude oil and bodily fluids), restore liquid-repellency after physical damage, and resist ice, microorganisms and insects adhesion. Some exemplary applications where self-lubricating polymers will be useful include energy-efficient, friction-reduction fluid handling and transportation, medical devices, anti-icing, optical sensing, and as self-cleaning, and anti-fouling materials operating in extreme environments.

  4. Research and quality improvement experience and knowledge: a nursing survey.

    Science.gov (United States)

    Fox, Jolene; Bagley, Lisa; Day, Suzanne; Holleran, Renee; Handrahan, Diana

    2011-07-01

    To assess nursing staff's background and research and quality improvement (QI) experience. In this corporation, participation in research and QI is encouraged, but little is known about nurses' experiences. A web-based survey was distributed. Nursing staffs from an academic/teaching medical centre and other intra-corporation non-academic facilities were compared. Respondents included: 148 (52.9%) medical centre and 132 (47.1%) non-medical centre subjects. Medical centre respondents had a higher proportion previously engaged in research, currently engaged in research and previously engaged in QI. Productivity (grant, published and presented) was low for both groups but statistically lower for the non-medical centre group. Medical centre employees used research resources more often than the non-medical centre. Time was the most frequently mentioned barrier to participation in research and QI initiatives. A moderate proportion of respondents had research and QI experience, yet productivity and use of resources was low. Nurses at non-academically focused facilities were in most need of assistance. Familiarizing nurses with resources and providing protected time may increase productivity. Developing an infrastructure to support nursing research is a worthy goal. Information about interest and experience of nurses can aid management in determining how to focus financial resources. © 2011 The Authors. Journal compilation © 2011 Blackwell Publishing Ltd.

  5. A Review of Ionic Liquid Lubricants

    OpenAIRE

    Anthony E. Somers; Patrick C. Howlett; Douglas R. MacFarlane; Maria Forsyth

    2013-01-01

    Due to ever increasing demands on lubricants, such as increased service intervals, reduced volumes and reduced emissions, there is a need to develop new lubricants and improved wear additives. Ionic liquids (ILs) are room temperature molten salts that have recently been shown to offer many advantages in this area. The application of ILs as lubricants in a diverse range of systems has found that these materials can show remarkable protection against wear and significantly reduce friction in th...

  6. Lubricant test for punching and blanking

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

    2003-01-01

    Punching/blanking is one of the tribologically wise most severe metal forming processes.Insu $cient lubrication leads to heavy pick-up of work piece material on the punch stem,bad tolerances and eventual breakdown of the punch due to excessive backstroke force,especially in case of tribologically...... of alternative lubricants the present paper describes a new lubricant test for punching....

  7. Lubrication for hot working of titanium alloys

    International Nuclear Information System (INIS)

    Gotlib, B.M.

    1980-01-01

    The isothermal lubrication of the following composition is suggested, wt. %: aluminium powder 4-6, iron scale 15-25, vitreous enamel up to 100. The lubricant improves forming and decreases the danger of the metal fracture when titanium alloys working. It is advisable to use the suggested lubrication when stamping thin-walled products of titanium alloys at the blank temperature from 700 to 1000 deg C [ru

  8. Samples and data accessibility in research biobanks: an explorative survey

    Directory of Open Access Journals (Sweden)

    Marco Capocasa

    2016-02-01

    Full Text Available Biobanks, which contain human biological samples and/or data, provide a crucial contribution to the progress of biomedical research. However, the effective and efficient use of biobank resources depends on their accessibility. In fact, making bio-resources promptly accessible to everybody may increase the benefits for society. Furthermore, optimizing their use and ensuring their quality will promote scientific creativity and, in general, contribute to the progress of bio-medical research. Although this has become a rather common belief, several laboratories are still secretive and continue to withhold samples and data. In this study, we conducted a questionnaire-based survey in order to investigate sample and data accessibility in research biobanks operating all over the world. The survey involved a total of 46 biobanks. Most of them gave permission to access their samples (95.7% and data (85.4%, but free and unconditioned accessibility seemed not to be common practice. The analysis of the guidelines regarding the accessibility to resources of the biobanks that responded to the survey highlights three issues: (i the request for applicants to explain what they would like to do with the resources requested; (ii the role of funding, public or private, in the establishment of fruitful collaborations between biobanks and research labs; (iii the request of co-authorship in order to give access to their data. These results suggest that economic and academic aspects are involved in determining the extent of sample and data sharing stored in biobanks. As a second step of this study, we investigated the reasons behind the high diversity of requirements to access biobank resources. The analysis of informative answers suggested that the different modalities of resource accessibility seem to be largely influenced by both social context and legislation of the countries where the biobanks operate.

  9. Development of High Temperature Solid Lubricant Coatings

    National Research Council Canada - National Science Library

    Bhattacharya, Rabi

    1999-01-01

    ... environment. To test this approach, UES and Cleveland State University have conducted experiments to form cesium oxythiotungstate, a high temperature lubricant, on Inconel 718 surface from composite coatings...

  10. Ecotoxicological study of used lubricating oil

    International Nuclear Information System (INIS)

    Wong, P.K.; Chan, W.L.; Wang, J.; Wong, C.K.

    1995-01-01

    Used lubricating oil is more toxic than crude oil and fuel oil since it contains comparatively high levels of heavy metals and polycyclic aromatic hydrocarbons (PAHs). No detail toxicological study has been conducted to evaluate the hazards of used lubricating oil to the environment. This study reports a battery of bioassays using bacteria (Microtox test and Mutatox test), algae, amphipod and shrimp larvae to determine the toxicity of water soluble fraction of used lubricating oil. The results will be used to formulate a complete and extensive ecotoxicological assessment of the impacts of used lubricating oil on aquatic environment

  11. On the lubrication mechanism of detonation-synthesis nanodiamond additives in lubricant composites

    Science.gov (United States)

    Shepelevskii, A. A.; Esina, A. V.; Voznyakovskii, A. P.; Fadin, Yu. A.

    2017-09-01

    The lubrication of detonation-synthesis diamond additives in lubricant composites has been discussed. The mechanism of interaction between nanodiamonds and friction surface has been shown to depend on the applied load. Two models of the lubrication of nanodiamonds and the conditions for their validity have also been proposed.

  12. Lubrication from mixture of boric acid with oils and greases

    Science.gov (United States)

    Erdemir, Ali

    1995-01-01

    Lubricating compositions including crystalline boric acid and a base lubricant selected from oils, greases and the like. The lubricity of conventional oils and greases can also be improved by adding concentrates of boric acid.

  13. Strip reduction testing of lubricants developed during ENFORM project

    DEFF Research Database (Denmark)

    Gazvoda, S.; Andreasen, Jan Lasson; Olsson, David Dam

    Strip reduction testing of lubricants developed during ENFORM project. Experiments were conducted with the strip reduction test [1] in order to classify experimental lubricants, developed during concerned project. One reference lubricant was used during testing....

  14. A study of energy consumption in turning process using lubrication of nanoparticles enhanced coconut oil (NECO)

    Science.gov (United States)

    Mansor, A. F.; Zakaria, M. S.; Azmi, A. I.; Khalil, A. N. M.; Musa, N. A.

    2017-10-01

    Cutting fluids play very important role in machining application in order to increase tool life, surface finish and reduce energy consumption. Instead of using petrochemical and synthetic based cutting fluids, vegetable oil based lubricants is safety for operators, environmental friendly and become more popular in the industrial applications. This research paper aims to find the advantage of using vegetable oils (coconut oil) with additional of nano particles (CuO) as lubricant to the energy consumption during machining process. The energy was measured for each run from 2 level factorial experimental layout. Obtained results illustrate that lubricant with enhancement of nanoparticles has capability to improve the energy consumption during the machining process.

  15. Nuclear fuel handling grapple carriage with self-lubricating bearing

    International Nuclear Information System (INIS)

    Wade, E.E.

    1978-01-01

    Disclosed is a nuclear fuel handling grapple carriage having a bearing with a lubricant reservoir that is capable of being refilled when the bearing and reservoir are submerged in a lubricant pool. The lubricant reservoir supplies lubricant to the bearing while the bearing allows a small amount of lubricant to leak passed appropriately placed seals creating a positive out flow of lubricant thereby preventing foreign material from entering the bearing

  16. Lubricant Performance and Evaluation.

    Science.gov (United States)

    1987-06-01

    Robert E. Kauffman * University of Day..on Research InstituteI Dayton, Ohio 4546; Jun 1987 S U- 4BD Interim Technical Report For Period17 June 1985...InI 133 43-.-l 311 u0.C ) 4- ta 0 0)0 m~tO tD r-ww D Chm4- -4 CD ") I-MW--- L)Ci 00 LnCD 0000004.4.(AJC cctO 0~ CO 4 LAU, CL 4) 4i M0 m 0 cmi CA...L)E- CP L) C,1-4 P)1- lz 1 0 "’ dccE-4 C") LA tD wx I (𔃻 :D W wI 363 0 -4 0) %0 0** *A ONV 9) kn k )4) 12LnA 4-4 0 0m - O .Dt-C%0 ~ 0 -0 *-LA .h %D

  17. Improved Ionic Liquids as Space Lubricants, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Ionic liquids are candidate lubricant materials. However for application in low temperature space mechanisms their lubrication performance needs to be enhanced. UES...

  18. Use of Textured Surfaces to Mitigate Sliding Friction and Wear of Lubricated and Non-Lubricated Contacts

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL

    2012-03-01

    If properly employed, the placement of three-dimensional feature patterns, also referred to as textures, on relatively-moving, load-bearing surfaces can be beneficial to their friction and wear characteristics. For example, geometric patterns can function as lubricant supply channels or depressions in which to trap debris. They can also alter lubricant flow in a manner that produces thicker load-bearing films locally. Considering the area occupied by solid areas and spaces, textures also change the load distribution on surfaces. At least ten different attributes of textures can be specified, and their combinations offer wide latitude in surface engineering. By employing directional machining and grinding procedures, texturing has been used on bearings and seals for well over a half century, and the size scales of texturing vary widely. This report summarizes past work on the texturing of load-bearing surfaces, including past research on laser surface dimpling of ceramics done at ORNL. Textured surfaces generally show most pronounced effects when they are used in conformal or nearly conformal contacts, like that in face seals. Combining textures with other forms of surface modification and lubrication methods can offer additional benefits in surface engineering for tribology. As the literature and past work at ORNL shows, texturing does not always provide benefits. Rather, the selected pattern and arrangement of features must be matched to characteristics of the proposed application, bearing materials, and lubricants.

  19. Characteristics Study of In-Situ Capacitive Sensor for Monitoring Lubrication Oil Debris.

    Science.gov (United States)

    Han, Zhibin; Wang, Yishou; Qing, Xinlin

    2017-12-08

    As an essential part of engine health monitoring (EHM), online lubrication oil debris monitoring has recently received great attention for the assessment of rotating and reciprocating parts in aero-engines, due to its high integration, low cost and safe characteristics. However, it is be a challenge to find a suitable sensor operating in such a complex environment. We present an unconventional novel approach, in which a cylinder capacitive sensor is designed and integrated with the pipeline of an engine lubrication system, so that the capacitive sensor can effectively detect changes in the lubrication oil condition. In this paper, an attempt to illustrate the performance characteristics of the developed cylinder capacitive sensor is made, through an experiment system that simulates a real scenario of a lubrication oil system. The main aim of the research was to qualitatively describe the relationship between the sensor parameter and the lubrication oil debris. In addition, the effect of the temperature and flow rate of the lubrication oil on capacitance change was performed by several experiments and we figured out a compensation method. The experimental results demonstrated that the cylinder capacitive sensor can potentially be used for lubrication oil debris monitoring of the health condition of an aero-engine.

  20. Comparison of in vivo efficacy of different ocular lubricants in dry eye animal models.

    Science.gov (United States)

    Zheng, Xiaodong; Goto, Tomoko; Ohashi, Yuichi

    2014-04-29

    To compare the efficacy of three types of ocular lubricants in protecting corneal epithelial cells in dry eye animal models. Ocular lubricants containing 0.1% or 0.3% sodium hyaluronate (SH), carboxymethylcellulose (CMC), or hydroxypropyl methylcellulose (HPMC) were tested. First, ocular lubricant containing 0.002% fluorescein was dropped onto the rabbit corneas. The fluorescein intensity as an index of retention was measured. Second, a rabbit dry eye model was made by holding the eye open with a speculum, and 50 μL of each ocular lubricant was dropped onto the cornea. After 3 hours, the corneas were stained with 1% methylene blue (MB), and the absorbance of MB was measured. Third, a rat dry eye model was treated with the ocular lubricants for 4 weeks, and the corneal fluorescein staining was scored. Eyes treated with physiological saline were used as controls. Finally, immunohistochemistry was used to analyze occludin, an epithelial barrier protein, in cultured human corneal epithelial cells pretreated with ocular lubricants and desiccated for 20 or 60 minutes. Our results showed that 0.3% SH had a significantly longer retention time than the other lubricants (all P eye syndrome. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

  1. Aminodisulfides as additives to lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Balin, A.I.; Tarasevich, V.B.; Veretenova, T.N.

    1980-01-01

    A study was carried out and tehcnology developed for producing sulfur-nitrogen containing additives of the type of aminodisulfide by interaction of beta, beta-dichlordialkyl (aryl) disulfides with diethanolamine in a medium of sulfur-diethanolamine. The 2,2'-bis-(diethanol)-dialkyl(aryl) disulfides obtained do not hydrolyze in aqueous soltuions of alkalis, exhibit rather high antiscoring properties and are recommended for tests as active additives of high pressure to SOZH and technological lubricants of the oil and emulsion types.

  2. Advancing vector biology research: a community survey for future directions, research applications and infrastructure requirements

    Science.gov (United States)

    Kohl, Alain; Pondeville, Emilie; Schnettler, Esther; Crisanti, Andrea; Supparo, Clelia; Christophides, George K.; Kersey, Paul J.; Maslen, Gareth L.; Takken, Willem; Koenraadt, Constantianus J. M.; Oliva, Clelia F.; Busquets, Núria; Abad, F. Xavier; Failloux, Anna-Bella; Levashina, Elena A.; Wilson, Anthony J.; Veronesi, Eva; Pichard, Maëlle; Arnaud Marsh, Sarah; Simard, Frédéric; Vernick, Kenneth D.

    2016-01-01

    Vector-borne pathogens impact public health, animal production, and animal welfare. Research on arthropod vectors such as mosquitoes, ticks, sandflies, and midges which transmit pathogens to humans and economically important animals is crucial for development of new control measures that target transmission by the vector. While insecticides are an important part of this arsenal, appearance of resistance mechanisms is increasingly common. Novel tools for genetic manipulation of vectors, use of Wolbachia endosymbiotic bacteria, and other biological control mechanisms to prevent pathogen transmission have led to promising new intervention strategies, adding to strong interest in vector biology and genetics as well as vector–pathogen interactions. Vector research is therefore at a crucial juncture, and strategic decisions on future research directions and research infrastructure investment should be informed by the research community. A survey initiated by the European Horizon 2020 INFRAVEC-2 consortium set out to canvass priorities in the vector biology research community and to determine key activities that are needed for researchers to efficiently study vectors, vector-pathogen interactions, as well as access the structures and services that allow such activities to be carried out. We summarize the most important findings of the survey which in particular reflect the priorities of researchers in European countries, and which will be of use to stakeholders that include researchers, government, and research organizations. PMID:27677378

  3. The Lubricity of Glycerol and its Solutions

    DEFF Research Database (Denmark)

    Sivebæk, Ion Marius; Jakobsen, J.

    2016-01-01

    Glycerol has been recognised as an excellent diesel fuel and lubricant. It is a liquid that can originate from the transesterification of plant oil that also results in plant oil metyl (or ethyl) ester (biodiesel). Machine elements lubricated by glycerol show very low friction, in fact lower than...

  4. A Biomimetic Approach to Lubricate Engineering Materials

    DEFF Research Database (Denmark)

    Røn, Troels

    lubrication characteristic is dominant via ‘selfhealing’ mechanism. The glycosylated FpHYD5 revealed a better lubrication than HFBI. Two type II hydrophobins function more favorably compared to synthetic amphiphilic copolymer, PEO-PPO-PEO, with a similar molecular weight. This is ascribed to higher amount...

  5. Lubricity characteristics of marine distillate fuels

    Energy Technology Data Exchange (ETDEWEB)

    Crutchley, Ian [Innospec Fuel Specialties, Ellesmere Port (United Kingdom); Green, Michael [Intertek Lintec ShipCare Services, Darlington (United Kingdom)

    2012-08-15

    This article from Innospec Fuel Specialties, Ellesmere Port, UK, and Intertek Lintec ShipCare Services, Darlington, UK, examines the lubricity characteristics of marine distillate fuels available today in relation to the requirements and limits imposed in ISO8217:2010. It will estimate expected failure rates and also asses the perceived relationship between lubricity, sulphur content and viscosity. (orig.)

  6. Lubricants : the lifeblood of wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Tremblay, Y. [Petro-Canada, Calgary, AB (Canada)

    2009-07-01

    With the significant investments in wind turbine equipment, companies need to exercise due diligence when it comes to the types of lubricants and fluids used. Mechanical and equipment issues can often be eliminated with improved maintenance practices and the appropriate selection of lubricants. This presentation discussed lubricants as being the lifeblood of wind turbines. The presentation first provided an overview and discussed wind turbine trends and application trends. The technical aspects of fluid formation were presented. Lubrication maintenance practices and oil monitoring were discussed. Last, key industry tests, and OEM specifications for bearings, gearboxes, and wind turbines were identified. It was concluded that improved maintenance practices in combination with the correct lubricant selection can address several operating problems. figs.

  7. Research engagement of health sciences librarians: a survey of research-related activities and attitudes.

    Science.gov (United States)

    Lessick, Susan; Perryman, Carol; Billman, Brooke L; Alpi, Kristine M; De Groote, Sandra L; Babin, Ted D

    2016-04-01

    The extent to which health sciences librarians are engaged in research is a little-studied question. This study assesses the research activities and attitudes of Medical Library Association (MLA) members, including the influence of work affiliation. An online survey was designed using a combination of multiple-choice and open-ended questions and distributed to MLA members. Responses were analyzed using descriptive statistics, content analysis, and significance testing. The authors used statistical tools and categorized open-ended question topics by the constant comparative method, also applying the broad subject categories used in a prior study. Pearson's chi-square analysis was performed on responses to determine significant differences among respondents employed in three different institutional environments. Analysis showed that 79% of respondents read research articles at least once a month; 58% applied published research studies to practice; 44% had conducted research; 62% reported acting on research had enhanced their libraries; 38% had presented findings; and 34% had authored research articles. Hospital librarians were significantly less likely than academic librarians to have participated in research activities. Highly ranked research benefits, barriers, and competencies of health sciences librarians are described. Findings indicate that health sciences librarians are actively engaged in research activities. Practice implications for practitioners, publishers, and stakeholders are discussed. Results suggest that practitioners can use published research results and results from their own research to affect practice decisions and improve services. Future studies are needed to confirm and extend these findings, including the need for intervention studies to increase research and writing productivity.

  8. A survey of patients' attitudes to clinical research.

    LENUS (Irish Health Repository)

    Desmond, A

    2011-04-01

    Every year hundreds of patients voluntarily participate in clinical trials across Ireland. However, little research has been done as to how patients find the experience. This survey was conducted in an attempt to ascertain clinical trial participants\\' views on their experience of participating in a clinical trial and to see and how clinical trial participation can be improved. One hundred and sixty-six clinical trial participants who had recently completed a global phase IV cardiovascular endpoint clinical trial were sent a 3-page questionnaire. Ninety-one (91%) respondents found the experience of participating in a clinical trial a good one with 85 (84.16%) respondents saying they would recommend participating in a clinical trial to a friend or relative and eighty-five (87.63%) respondents feeling they received better healthcare because they had participated in a clinical trial.

  9. Multiscale Analysis of the Roughness Effect on Lubricated Rough Contact

    OpenAIRE

    Demirci , Ibrahim; MEZGHANI , Sabeur; YOUSFI , Mohammed; El Mansori , Mohamed

    2014-01-01

    Determining friction is as equally essential as determining the film thickness in the lubricated contact, and is an important research subject. Indeed, reduction of friction in the automotive industry is important for both the minimization of fuel consumption as well as the decrease in the emissions of greenhouse gases. However, the progress in friction reduction has been limited by the difficulty in understanding the mechanism of roughness effects on friction. It was observed that micro-surf...

  10. Double angle seal forming lubricant film

    Science.gov (United States)

    Ernst, William D.

    1984-01-01

    A lubricated piston rod seal which inhibits gas leaking from a high pressure chamber on one side of the seal to a low pressure chamber on the other side of the seal. A liquid is supplied to the surface of the piston rod on the low pressure side of the seal. This liquid acts as lubricant for the seal and provides cooling for the rod. The seal, which can be a plastic, elastomer or other material with low elastic modulus, is designed to positively pump lubricant through the piston rod/seal interface in both directions when the piston rod is reciprocating. The capacity of the seal to pump lubricant from the low pressure side to the high pressure side is less than its capacity to pump lubricant from the high pressure side to the low pressure side which ensures that there is zero net flow of lubricant to the high pressure side of the seal. The film of lubricant between the seal and the rod minimizes any sliding contact and prevents the leakage of gas. Under static conditions gas leakage is prevented by direct contact between the seal and the rod.

  11. Nanopolishing by colloidal nanodiamond in elastohydrodynamic lubrication

    Energy Technology Data Exchange (ETDEWEB)

    Shirvani, Khosro A., E-mail: Khosro.asgharishir@bison.howard.edu; Mosleh, Mohsen; Smith, Sonya T. [Howard University, Department of Mechanical Engineering (United States)

    2016-08-15

    In this paper, the feasibility of using explosion synthesized diamond nanoparticles with an average particle size (APS) of 3–5 nm with a concentration of 1 % by weight for improving lubrication and friction in elastohydrodynamic lubrication (EHL) was investigated. Owing to the orders of magnitude increase in the viscosity of the lubricant in the EHL contact zone, diamond nanoparticles in the lubricant polish the surfaces at the nanoscale which decreases the composite roughness of contacting surfaces. The reduced composite roughness results in an increased film thickness ratio which yields lower friction. In the numerical analysis, governing equations of lubricant flow in the full elastohydrodynamic lubrication were solved, and the shear stress distribution over the fluid film was calculated. Using an abrasion model and the shear stress distribution profile, the material removal by the nanofluid containing nanoparticles and the resultant surface roughness were determined. The numerical analysis showed that in full EHL regime, the nanolubricant can reduce the composite roughness of moving surfaces. Experimental results from prior studies which exhibited surface polishing by such nanolubricants in boundary, mixed, and full elastohydrodynamic lubrication were used for comparison to the numerical model.

  12. Nanopolishing by colloidal nanodiamond in elastohydrodynamic lubrication

    Science.gov (United States)

    Shirvani, Khosro A.; Mosleh, Mohsen; Smith, Sonya T.

    2016-08-01

    In this paper, the feasibility of using explosion synthesized diamond nanoparticles with an average particle size (APS) of 3-5 nm with a concentration of 1 % by weight for improving lubrication and friction in elastohydrodynamic lubrication (EHL) was investigated. Owing to the orders of magnitude increase in the viscosity of the lubricant in the EHL contact zone, diamond nanoparticles in the lubricant polish the surfaces at the nanoscale which decreases the composite roughness of contacting surfaces. The reduced composite roughness results in an increased film thickness ratio which yields lower friction. In the numerical analysis, governing equations of lubricant flow in the full elastohydrodynamic lubrication were solved, and the shear stress distribution over the fluid film was calculated. Using an abrasion model and the shear stress distribution profile, the material removal by the nanofluid containing nanoparticles and the resultant surface roughness were determined. The numerical analysis showed that in full EHL regime, the nanolubricant can reduce the composite roughness of moving surfaces. Experimental results from prior studies which exhibited surface polishing by such nanolubricants in boundary, mixed, and full elastohydrodynamic lubrication were used for comparison to the numerical model.

  13. Application of a Biodegradable Lubricant in a Diesel Vehicle

    DEFF Research Database (Denmark)

    Schramm, Jesper

    2003-01-01

    , NOx, THC, PM, lubricant-SOF and PAH from one diesel and one gasoline type vehicle using biodegradable lubricants and conventional lubricants. This paper describes the results of the experiments with the diesel type vehicle only. Lubricant consumption and fuel consumption are other important parameters...

  14. A study of mechanisms of liquid lubrication in metal forming

    DEFF Research Database (Denmark)

    Bech, Jakob Ilsted; Bay, Niels; Eriksen, Morten

    1998-01-01

    Applying a transparent tool technique the lubrication in plane strip drawing of aluminium sheet is studied providing the strip with surface pockets for entrapment of lubricant. The compression and eventual escape of trapped lubricant by Micro Plasto HydroDynamic Lubrication (MPHDL) as well as Micro...

  15. Multipath Routing in Wireless Sensor Networks: Survey and Research Challenges

    Science.gov (United States)

    Radi, Marjan; Dezfouli, Behnam; Bakar, Kamalrulnizam Abu; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks. PMID:22368490

  16. Environmental survey at Lucas Heights Research Laboratories, 1992

    International Nuclear Information System (INIS)

    Hoffman, E.L.; Loosz, T.

    1994-07-01

    This report summarises the results from the environmental survey during 1992 and assesses the effects of radioactive discharges on both local population and the environment. None of the samples taken from possible human food chains in the vicinity of the Lucas Heights Research Laboratories contained radioactivity which could be attributed to the operation of the site. The data presented din this report clearly shows that the environmental impact of operations at LHRL has been very low. The effective dose to residents living in the immediate neighbourhood of the reactor are very difficult to measure directly but calculated dose estimates are far lower than those due to natural background radiation and medical exposures. Discharges of airborne radioactive gases were within authorised limits when averaged over the year. The dose to the most sensitive members of the public from iodine-131 releases, was -2 mSv/year and the calculated dose from released noble gases to the most exposed individuals was less than 0.01 mSv/year. These figures represent less than one per cent of the limits recommended by the National Health and Medical Research Council of Australia. The monthly average liquid effluent discharge to the Water Board Sewer during 1992 was less than 30 per cent of the permitted level for all periods except May which rose to 62 per cent. For tritium, the concentration was less than 2 per cent of the specified limit. 23 refs., 19 tabs., 5 tabs

  17. Multipath routing in wireless sensor networks: survey and research challenges.

    Science.gov (United States)

    Radi, Marjan; Dezfouli, Behnam; Abu Bakar, Kamalrulnizam; Lee, Malrey

    2012-01-01

    A wireless sensor network is a large collection of sensor nodes with limited power supply and constrained computational capability. Due to the restricted communication range and high density of sensor nodes, packet forwarding in sensor networks is usually performed through multi-hop data transmission. Therefore, routing in wireless sensor networks has been considered an important field of research over the past decade. Nowadays, multipath routing approach is widely used in wireless sensor networks to improve network performance through efficient utilization of available network resources. Accordingly, the main aim of this survey is to present the concept of the multipath routing approach and its fundamental challenges, as well as the basic motivations for utilizing this technique in wireless sensor networks. In addition, we present a comprehensive taxonomy on the existing multipath routing protocols, which are especially designed for wireless sensor networks. We highlight the primary motivation behind the development of each protocol category and explain the operation of different protocols in detail, with emphasis on their advantages and disadvantages. Furthermore, this paper compares and summarizes the state-of-the-art multipath routing techniques from the network application point of view. Finally, we identify open issues for further research in the development of multipath routing protocols for wireless sensor networks.

  18. The role and importance of victim surveys in criminal research

    OpenAIRE

    Ahmet Polat; Serdar Kenan Gül

    2010-01-01

    Due to increasing crime rates, insufficient policies and the limitations of the official statistics, victim surveys are being used as an alternative crime measurement technique. These types of surveys are inspired most of the criminological theories and regarded as a data source especially in shaping the crime policies of the Anglo-Saxon countries. Even though they have developed over time, victim surveys have limitations which create an obstacle in measuring crime. However, these surveys cou...

  19. Vegetable oil basestocks for lubricants

    Directory of Open Access Journals (Sweden)

    Garcés, Rafael

    2011-03-01

    Full Text Available The use of vegetable biodegradable basestocks for lubricant oils present several advantages over the much more extended mineral bases. These advantages refer to biodegradability, a renewable feedstock of local production, lubricant and viscosity index and lower costs than synthetic lubricant bases. Despite these benefits, their use in industry and motor vehicles is not yet extensive due their lower stability and higher pour points. Vegetable oils are esters of fatty acids and glycerol, and their physicochemical properties rely mainly on the composition of their acyl moieties. Thus, to assure the maximum levels of stability while maintaining acceptable behavior at low temperatures, monounsaturated fatty acids are preferred for this purpose. The presence of natural antioxidants also improves the properties of these vegetable based stocks as lubricants. These oils usually require additives to improve their viscosity value, oxidative stability and properties at low temperatures. In the present work, the different sources of vegetable oils appropriate for biolubricant production were reviewed. Their properties and the future improvement of the oil bases, oil based stock production, uses and additives are discussed.

    El uso de bases vegetales biodegradables para aceites lubricantes presenta varias ventajas sobre las mucho más extendidas bases minerales. Estas ventajas se centran sobre todo en su biodegradabilidad, en ser un recurso renovable de producción local, en su lubricidad y en su índice de viscosidad, presentando además costes más bajos que las bases sintéticas. Sin embargo, estas ventajas no han extendido el uso de bases vegetales ni en industria ni en automoción debido a su menor estabilidad y sus mayores puntos críticos de fluidez. Los aceites vegetales son ésteres de ácidos grasos y glicerol y sus propiedades físico-químicas dependen principalmente de su composición acílica. Así, para asegurar los máximos niveles de

  20. Lubrication of nuclear reactor components

    International Nuclear Information System (INIS)

    Wild, E.; Mack, K.J.

    1978-01-01

    Safe operation of liquid metal cooled nuclear reactors requires a knowledge of the tribological behaviour of contacting components at high temperatures with slow relative movement at high frictional loads in a chemically aggressive environment. Experiments have been performed on various material combinations in liquid sodium and argon. Because of the small sliding movements, hydrodynamic lubrication is not expected and thus surface finish is an important factor. Tests have been performed on brushed, ground and lapped surfaces. Among the material combinations tested a CrC-coating on a 1.4961 stainless steel substrate performed well. Friction coefficients of 0.35-0.5 in argon and 0.1-1.2 in liquid sodium were recorded. (author)

  1. The role of lubricant analysis in maximizing lubricant and equipment life

    International Nuclear Information System (INIS)

    Janis, J.

    1995-01-01

    Lubricant analysis has always played an important yet somewhat invisible role in equipment health monitoring. At its most primitive, simple observations and field testing alert equipment operators to changing conditions. At its most advanced, data from performance and analytical tests are used to develop or select optimum lubricants for service, stretch drain intervals, predict remaining equipment life and identify potential equipment or system problems at an incipient stage. Coupled with thermography and vibration analysis, lubricant analysis can become a major component of a comprehensive predictive maintenance (PM) program. Ontario Hydro finds itself at a turning point regarding the use and monitoring of lubricants. Increasing emphasis on equipment reliability and plant life extension, coupled with major, recent changes in lubricant composition in response to environmental, energy and safety concerns, forces an upgrading of many aspects of lubricant monitoring so that it may establish itself as a key part of modern PM practices. This paper discusses some of these aspects. (author)

  2. Potential of Palm Olein as Green Lubricant Source: Lubrication Analysis and Chemical Characterisation

    International Nuclear Information System (INIS)

    Darfizzi Derawi; Jumat Salimon

    2014-01-01

    Palm olein (PO o ) is widely used as edible oil in tropical countries. The lubrication properties and chemical compositions of PO o being considered to be used as renewable raw material for bio lubricant synthesis. PO o is suitable to be used directly as bio lubricant for medium temperature industrial applications. Palm olein has good viscosity index, oxidative stability, flash and fire point as a lubricant source. PO o contains unsaturated triacylglycerols (TAG): Palmitin-Olein-Olein, POO (33.3 %), Palmitin-Olein-Palmitin, POP (29.6 %), which are very important to produce good lubricant properties. This unsaturated bond is preferable in chemical modification to produce bio lubricant. The chemical compositions of PO o were tested by using high performance liquid chromatography (HPLC) and gas chromatography (GC) techniques. (author)

  3. Researching moral distress among New Zealand nurses: a national survey.

    Science.gov (United States)

    Woods, Martin; Rodgers, Vivien; Towers, Andy; La Grow, Steven

    2015-02-01

    Moral distress has been described as a major problem for the nursing profession, and in recent years, a considerable amount of research has been undertaken to examine its causes and effects. However, few research projects have been performed that examined the moral distress of an entire nation's nurses, as this particular study does. The purpose of this study was to determine the frequency and intensity of moral distress experienced by registered nurses in New Zealand. The research involved the use of a mainly quantitative approach supported by a slightly modified version of a survey based on the Moral Distress Scale-Revised. In total, 1500 questionnaires were sent out at random to nurses working in general areas around New Zealand and 412 were returned, giving an adequate response rate of 27%. The project was evaluated and judged to be low risk and recorded as such on 22 February 2011 via the auspices of the Massey University Human Ethics Committee. Results indicate that the most frequent situations to cause nursing distress were (a) having to provide less than optimal care due to management decisions, (b) seeing patient care suffer due to lack of provider continuity and (c) working with others who are less than competent. The most distressing experiences resulted from (a) working with others who are unsafe or incompetent, (b) witnessing diminished care due to poor communication and (c) watching patients suffer due to a lack of provider continuity. Of the respondents, 48% reported having considered leaving their position due to the moral distress. The results imply that moral distress in nursing remains a highly significant and pertinent issue that requires greater consideration by health service managers, policymakers and nurse educators. © The Author(s) 2014.

  4. Using Person Fit Statistics to Detect Outliers in Survey Research

    Directory of Open Access Journals (Sweden)

    John M. Felt

    2017-05-01

    Full Text Available Context: When working with health-related questionnaires, outlier detection is important. However, traditional methods of outlier detection (e.g., boxplots can miss participants with “atypical” responses to the questions that otherwise have similar total (subscale scores. In addition to detecting outliers, it can be of clinical importance to determine the reason for the outlier status or “atypical” response.Objective: The aim of the current study was to illustrate how to derive person fit statistics for outlier detection through a statistical method examining person fit with a health-based questionnaire.Design and Participants: Patients treated for Cushing's syndrome (n = 394 were recruited from the Cushing's Support and Research Foundation's (CSRF listserv and Facebook page.Main Outcome Measure: Patients were directed to an online survey containing the CushingQoL (English version. A two-dimensional graded response model was estimated, and person fit statistics were generated using the Zh statistic.Results: Conventional outlier detections methods revealed no outliers reflecting extreme scores on the subscales of the CushingQoL. However, person fit statistics identified 18 patients with “atypical” response patterns, which would have been otherwise missed (Zh > |±2.00|.Conclusion: While the conventional methods of outlier detection indicated no outliers, person fit statistics identified several patients with “atypical” response patterns who otherwise appeared average. Person fit statistics allow researchers to delve further into the underlying problems experienced by these “atypical” patients treated for Cushing's syndrome. Annotated code is provided to aid other researchers in using this method.

  5. A Primer for Conducting Survey Research Using MTurk: Tips for the Field

    Science.gov (United States)

    Chambers, Silvana; Nimon, Kim; Anthony-McMann, Paula

    2016-01-01

    This paper presents best practices for conducting survey research using Amazon Mechanical Turk (MTurk). Readers will learn the benefits, limitations, and trade-offs of using MTurk as compared to other recruitment services, including SurveyMonkey and Qualtrics. A synthesis of survey design guidelines along with a sample survey are presented to help…

  6. Federal Office of Energy Research program: Survey on Markers

    International Nuclear Information System (INIS)

    Buser, M.

    2012-01-01

    Marcos Buser presented the state of the art on markers by means of a literature survey; the study has synthesized the knowledge on markers, identified gaps and contradictions in the marker programs and addressed research areas that have been covered in the past. The boundary conditions for the study were that it would take a very broad inter- and trans- disciplinary approach that incorporates results and evidences. Questions related to knowledge transfer and long-term societal issues show important gaps of knowledge, particularly regarding message transmission. The transmission process is strongly dependent on contextual understanding, and better understanding of such contextual changes is necessary for better encoding. The general findings of the survey are: - Need of synthesis has been confirmed; - Contradictions in the goals of marker strategies must be identified; - Entirety: although questions of technical nature or relating to the natural sciences are easier than societal questions, all processes must be analyzed from a inter- and trans-disciplinary point of view, and not from specific perspectives; - The importance of social sciences is greatly underestimated. The specific findings are: - Research on intrusion motivation is crucial for the design of marker programs (as well as for the configuration of a repository); - System development has to be understood, not just the development of single elements; - Findings in semiotic sciences, message transmission and misinterpretation and misuse are decisive. In the discussion, the question was raised whether the repository itself may acts as a marker, for instance because of the fact that all advanced drills apparently have a radiation detector, or, additionally, by adding symbols on the walls of the shafts. Buser underlined that knowledge transfer and long-term societal issues raises a series of questions related to stability of societies, stability of social structures, evolution of laws and regulations, transfer

  7. Research engagement of health sciences librarians: a survey of research-related activities and attitudes

    Directory of Open Access Journals (Sweden)

    Susan Lessick, MA, MLS, AHIP, FMLA

    2016-11-01

    Full Text Available Introduction: The extent to which health sciences librarians are engaged in research is a little-studied question. This study assesses the research activities and attitudes of Medical Library Association (MLA members, including the influence of work affiliation. Methods: An online survey was designed using a combination of multiple-choice and open-ended questions and distributed to MLA members. Responses were analyzed using descriptive statistics, content analysis, and significance testing. The authors used statistical tools and categorized openended question topics by the constant comparative method, also applying the broad subject categories used in a prior study. Pearson’s chi-square analysis was performed on responses to determine significant differences among respondents employed in three different institutional environments. Results: Analysis showed that 79% of respondents read research articles at least once a month; 58% applied published research studies to practice; 44% had conducted research; 62% reported acting on research had enhanced their libraries; 38% had presented findings; and 34% had authored research articles. Hospital librarians were significantly less likely than academic librarians to have participated in research activities. Highly ranked research benefits, barriers, and competencies of health sciences librarians are described. Conclusions: Findings indicate that health sciences librarians are actively engaged in research activities. Practice implications for practitioners, publishers, and stakeholders are discussed. Results suggest that practitioners can use published research results and results from their own research to affect practice decisions and improve services. Future studies are needed to confirm and extend these findings, including the need for intervention studies to increase research and writing productivity.

  8. International research into chlorofluorocarbon (CFC) alternatives

    Energy Technology Data Exchange (ETDEWEB)

    Marseille, T.J.; Shankle, D.L.; Thurman, A.G.

    1992-05-01

    Selected researchers from 21 countries were queried through questionnaires about their current and planned research activities. The results of the survey show that the majority of research being conducted by the respondents is devoted to investigating the hydrogenated fluorocarbon HFC-134a as a replacement for CFC-12 in refrigeration applications. The main issue with this alternative is identifying compatible lubricants that do not reduce its effectiveness.

  9. A SURVEY AND BIBLIOGRAPHY OF CONTEMPORARY RESEARCH ON POLITICAL LEARNING AND SOCIALIZATION.

    Science.gov (United States)

    DENNIS, JACK

    A GENERAL SURVEY WAS MADE OF RESEARCH AND LITERATURE IN THE FIELD OF POLITICAL LEARNING AND SOCIALIZATION, AND A BIBLIOGRAPHY WAS PREPARED. THE SURVEY WAS MADE TO PROVIDE AN INDICATION OF THE MAIN CURRENTS OF STUDY OF CHILDREN'S LEARNING OF POLITICAL CONCEPTS. THE SURVEY INCLUDED MAJOR SUBSTANTIVE PROBLEMS OF POLITICAL SOCIALIZATION RESEARCH--(1)…

  10. 49 CFR 396.5 - Lubrication.

    Science.gov (United States)

    2010-10-01

    ..., DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS INSPECTION, REPAIR, AND MAINTENANCE § 396.5 Lubrication. Every motor carrier shall ensure that each motor vehicle subject to its control is...

  11. Excellent lubricating behavior of Brasenia schreberi mucilage.

    Science.gov (United States)

    Li, Jinjin; Liu, Yuhong; Luo, Jianbin; Liu, Pengxiao; Zhang, Chenhui

    2012-05-22

    The present work reports an excellent lubrication property of an aquatic plant called Brasenia schreberi (BS). To investigate the lubrication characteristics of the BS mucilage, a novel measuring system is designed, and an ultralow friction coefficient about 0.005 between the mucilage and glass surface has been obtained. It is found that the ultralow friction is closely related to the structure of mucilage and water molecules in the mucilage. The microstructure analysis indicates that the mucilage surrounding BS forms a kind of polysaccharide gel with many nanosheets. A possible lubrication mechanism is proposed that the formation of hydration layers among these polymer nanosheets with plenty of bonded water molecules causes the ultralow friction. The excellent lubrication property has a potential application for reducing the friction between a glossy pill coated with such layer of mucilage and people's throats.

  12. Nanoscale Organic−Inorganic Hybrid Lubricants

    KAUST Repository

    Kim, Daniel; Archer, Lynden A.

    2011-01-01

    Silica (SiO2) nanoparticles densely grafted with amphiphilic organic chains are used to create a family of organic-inorganic hybrid lubricants. Short sulfonate-functionalized alkylaryl chains covalently tethered to the particles form a dense corona

  13. Fuels and Petroleum, Oil & Lubricants (POL) Laboratories

    Data.gov (United States)

    Federal Laboratory Consortium — The Fuels and Lubricants Technology Team operates and maintains the Fuels and POL Labs at TARDEC. Lab experts adhere to standardized American Society for Testing and...

  14. Biodegradable lubricants - ''the solution for future?''

    International Nuclear Information System (INIS)

    Jahan, A.

    1997-01-01

    The environmental impact of lubricants use concern the direct effects from spills but also the indirect effects such as their lifetime and the emissions from thermal engines. The biodegradable performances and the toxicity are the environmental criteria that must be taken into account in the development and application of lubricants together with their technical performances. This paper recalls first the definition of biodegradable properties of hydrocarbons and the standardized tests, in particular the CEC and AFNOR tests. Then, the biodegradable performances of basic oils (mineral, vegetal, synthetic esters, synthetic hydrocarbons etc..), finite lubricants (hydraulic fluids..) and engine oils is analyzed according to these tests. Finally, the definition of future standards would take into account all the environmental characteristics of the lubricant: biodegradable performances, energy balance (CO 2 , NOx and Hx emissions and fuel savings), eco-toxicity and technical performances (wearing and cleanliness). (J.S.)

  15. Determining minimum lubrication film for machine parts

    Science.gov (United States)

    Hamrock, B. J.; Dowson, D.

    1978-01-01

    Formula predicts minimum film thickness required for fully-flooded ball bearings, gears, and cams. Formula is result of study to determine complete theoretical solution of isothermal elasto-hydrodynamic lubrication of fully-flooded elliptical contacts.

  16. Lubrication and cooling for high speed gears

    Science.gov (United States)

    Townsend, D. P.

    1985-01-01

    The problems and failures occurring with the operation of high speed gears are discussed. The gearing losses associated with high speed gearing such as tooth mesh friction, bearing friction, churning, and windage are discussed with various ways shown to help reduce these losses and thereby improve efficiency. Several different methods of oil jet lubrication for high speed gearing are given such as into mesh, out of mesh, and radial jet lubrication. The experiments and analytical results for the various methods of oil jet lubrication are shown with the strengths and weaknesses of each method discussed. The analytical and experimental results of gear lubrication and cooling at various test conditions are presented. These results show the very definite need of improved methods of gear cooling at high speed and high load conditions.

  17. A survey of animal welfare needs in Soweto : research communication

    Directory of Open Access Journals (Sweden)

    C.M.E. McCrindle

    1997-07-01

    Full Text Available The diagnostic phase of an interactive research evaluation model was used in the investigation of the animal welfare needs of a low-income urban community in South Africa. Data were gathered by means of a structured interview and direct observations by animal welfare officers. During the survey of 871 animal owners in Soweto, it was found that dogs were owned by 778 households and cats by 88 households. The dog to human ratio was estimated at 1:12.4. Respondents were asked whether they enjoyed owning animals and 96.1 % said that they did. Only 26.3 % mentioned that they had problems with their own animals and 16.6 % had problems with other people's animals. Treatment of sick animals (29.7 % was seen as a priority. However, less than 1 % (n = 6 used the services of private veterinarians. Others took their animals to welfare organisations or did not have them treated. Perceptions of affordable costs of veterinary treatments were also recorded. In addition to treatment, respondents indicated a need for vaccination (22.5 %, sterilisation (16.5 %, control of internal (3.7 % and external (8.8 % parasites, education and extension (6.6 %, prevention of cruelty to animals (3.2 % and expansion of veterinary clinics to other parts of Soweto (1.3 %.

  18. A global survey of hydrogen energy research, development and policy

    International Nuclear Information System (INIS)

    Solomon, Barry D.; Banerjee, Abhijit

    2006-01-01

    Several factors have led to growing interest in a hydrogen energy economy, especially for transportation. A successful transition to a major role for hydrogen will require much greater cost-effectiveness, fueling infrastructure, consumer acceptance, and a strategy for its basis in renewable energy feedstocks. Despite modest attention to the need for a sustainable hydrogen energy system in several countries, in most cases in the short to mid term hydrogen will be produced from fossil fuels. This paper surveys the global status of hydrogen energy research and development (R and D) and public policy, along with the likely energy mix for making it. The current state of hydrogen energy R and D among auto, energy and fuel-cell companies is also briefly reviewed. Just two major auto companies and two nations have specific targets and timetables for hydrogen fuel cells or vehicle production, although the EU also has an aggressive, less specific strategy. Iceland and Brazil are the only nations where renewable energy feedstocks are envisioned as the major or sole future source of hydrogen. None of these plans, however, are very certain. Thus, serious questions about the sustainability of a hydrogen economy can be raised

  19. Tribological study for the application of biodegradable lubricants in the industry

    Energy Technology Data Exchange (ETDEWEB)

    Igartua, A.; Aranzabe, A.; Barriga, J.; Rodriguez, J. [TEKNIKER, Eibar (Spain)

    1998-11-01

    The main problems in critical machinery elements using vegetable base oil, are the poor behaviour concerning low temperature properties, hydrolytic and oxidation stability problems, overheating, compatibility, smell and corrosivity. Our technical approach deals with the development of new base-stocks such regrew industrial crops, biological and chemically improved vegetable oils decreasing the content of non stable products. It is necessary improve the rheologic behaviour, its oxidation and hydrolytic stability and decrease the actual limit of temperature of machines avoiding nucleation of paraffin`s. Transformation of these high performance oils into higher added value to lubricate gears is another objective of this research. Specialist in the world of surface treatments and lubrication with combined expertise in tribological behaviour and lubrication will perform tests in order to improve technical performance and efficiency of these new vegetable lubricants. Lifecycle cost will help to evaluate environmental and cost effective complete chain. In this paper, characteristics of the reference lubricants actually used for lubricate hydraulic equipment`s are reported. (author) 7 refs.

  20. Tribology experiment. [journal bearings and liquid lubricants

    Science.gov (United States)

    Wall, W. A.

    1981-01-01

    A two-dimensional concept for Spacelab rack 7 was developed to study the interaction of liquid lubricants and surfaces under static and dynamic conditions in a low-gravity environment fluid wetting and spreading experiments of a journal bearing experiments, and means to accurately measure and record the low-gravity environment during experimentation are planned. The wetting and spreading process of selected commercial lubricants on representative surface are to the observes in a near-zero gravity environment.

  1. Investigation of lubricants under boundary friction

    Science.gov (United States)

    Heidebroek, E; Pietsch, E

    1942-01-01

    Numerous observations of such lubrication processes within range of boundary friction on journal bearings and gear tooth profiles have strengthened the supposition that it should be possible to study the attendant phenomena with engineering methods and equipment. These considerations formed the basis of the present studies, which have led to the discovery of relations governing the suitability of bearing surfaces and the concept of "lubricating quality."

  2. Noise estimation of oil lubricated journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2003-01-01

    Noise estimating procedures of oil lubricated journal bearings are presented. Nonlinear analysis of rotor-bearing system including unbalance mass of the rotor is performed in order to obtain acoustical properties of the bearing. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Noise estimating procedures presented in this paper could aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

  3. International conference on research methodology for roadside surveys of drinking-driving : alcohol countermeasures workshop

    Science.gov (United States)

    1974-09-01

    The basic purpose [of the conference] was to encourage more roadside surveys by furthering the research methodology and recommendations for conducting roadside surveys developed by a special group of the Organization for Economic Cooperation and Deve...

  4. Determinan Kepuasan Pelanggan Pada Produk Pertamina Lubricants

    Directory of Open Access Journals (Sweden)

    Berto Mulia Wibawa

    2017-02-01

    Full Text Available Determinants of Customer Satisfaction at Pertamina's Lubricants ProductLubricant industry is one of the strategic industries in around the world. The potential of the lubricant industry in Indonesia grows rapidly along with the increasing demand and the number of a vehicle from year to year. This study aims to analyze factors that influencing customer satisfaction Pertamina Lubricants product and measure how far the customer satisfaction level of its product. This study observed eight categories of Pertamina Lubricants product, with quota sampling technique where each category of the product taken 30 samples, so the total number of the sample are 240 respondents. Multiple linear regression and customer satisfaction index were used in this study. The study finds brand popularity has the most significant effect on customer satisfaction, followed by price and durability. Customer satisfaction level stands at 78 percent, which means belongs in the satisfied category. Managerial implications of this study provide strategies for Pertamina Lubricants to improve their business performance and to increase the level of customer satisfactionDOI:  10.15408/ess.v7i1.4309  

  5. Recruitment methods for survey research: Findings from the Mid-South Clinical Data Research Network.

    Science.gov (United States)

    Heerman, William J; Jackson, Natalie; Roumie, Christianne L; Harris, Paul A; Rosenbloom, S Trent; Pulley, Jill; Wilkins, Consuelo H; Williams, Neely A; Crenshaw, David; Leak, Cardella; Scherdin, Jon; Muñoz, Daniel; Bachmann, Justin; Rothman, Russell L; Kripalani, Sunil

    2017-11-01

    The objective of this study was to report survey response rates and demographic characteristics of eight recruitment approaches to determine acceptability and effectiveness of large-scale patient recruitment among various populations. We conducted a cross sectional analysis of survey data from two large cohorts. Patients were recruited from the Mid-South Clinical Data Research Network using clinic-based recruitment, research registries, and mail, phone, and email approaches. Response rates are reported as patients who consented for the survey divided by the number of eligible patients approached. We contacted more than 90,000 patients and 13,197 patients completed surveys. Median age was 56.3years (IQR 40.9, 67.4). Racial/ethnic distribution was 84.1% White, non-Hispanic; 9.9% Black, non-Hispanic; 1.8% Hispanic; and 4.0% other, non-Hispanic. Face-to-face recruitment had the highest response rate of 94.3%, followed by participants who "opted-in" to a registry (76%). The lowest response rate was for unsolicited emails from the clinic (6.1%). Face-to-face recruitment enrolled a higher percentage of participants who self-identified as Black, non-Hispanic compared to other approaches (18.6% face-to-face vs. 8.4% for email). Technology-enabled recruitment approaches such as registries and emails are effective for recruiting but may yield less racial/ethnic diversity compared to traditional, more time-intensive approaches. Copyright © 2017. Published by Elsevier Inc.

  6. Markets for lubricants at a time of upheaval; Schmierstoffmarkt im Umbruch

    Energy Technology Data Exchange (ETDEWEB)

    Lindemann, Lutz [Fuchs Petrolub AG (Germany)

    2011-05-15

    The presentation considers the lubricants market and the lubricants under three different points of view. I will discuss the lubricants market under view of the development of the upcoming and existing regulatory risks. The requirements out of the regulations, which need to be fulfilled in the future by the lubricants manufacturer to handle the supply chain in a globalized economy are highlighted. The raw material world will be analyzed, since the raw material becomes a more and more dominating part of the lubricants world. Due to technical requirements the complexity of used raw material becomes a problem in view of the regulatory conditions we are working in. The latest development in the base oil landscape will be discussed. The influence of the changing refinery landscape in Europe and the influence on availability in Europe, USA and Asia are shown. Further more alternative base oils, inorganic additives, i.e. Mo and Li compounds and of course the special chemistry are part of the considerations as well. The third point of view considers the complexity of the lubricant development. The modern lubricant has seen a dramatic change from being a commodity to a process or construction element. The tribology as young discipline in science with a lot of cross-functional aspects requires a lot of additional research to understand more the mechanisms working in the tribosystem. In the farer future this may lead to more predictability than today. The necessity of research in research communities together with universities is mandatory to get the complexity under control. We have to leave the path of phenomenological research to knowledge based development. This is a necessary condition to be faster in development and more effective, which is needed to maintain our European first class position in the globalized world. (orig.)

  7. Enhancing Survey Participation: Facebook Advertisements for Recruitment in Educational Research

    Science.gov (United States)

    Forgasz, Helen; Tan, Hazel; Leder, Gilah; McLeod, Amber

    2018-01-01

    Surveys are commonly used to determine how people feel about a specific issue. The increasing availability of the internet and popularity of social networking sites have opened up new possibilities for conducting surveys and, with limited additional costs, enlarge the pool of volunteer respondents with the desired background, experience, or…

  8. Research Integrity and Research Ethics in Professional Codes of Ethics: Survey of Terminology Used by Professional Organizations across Research Disciplines.

    Science.gov (United States)

    Komić, Dubravka; Marušić, Stjepan Ljudevit; Marušić, Ana

    2015-01-01

    Professional codes of ethics are social contracts among members of a professional group, which aim to instigate, encourage and nurture ethical behaviour and prevent professional misconduct, including research and publication. Despite the existence of codes of ethics, research misconduct remains a serious problem. A survey of codes of ethics from 795 professional organizations from the Illinois Institute of Technology's Codes of Ethics Collection showed that 182 of them (23%) used research integrity and research ethics terminology in their codes, with differences across disciplines: while the terminology was common in professional organizations in social sciences (82%), mental health (71%), sciences (61%), other organizations had no statements (construction trades, fraternal social organizations, real estate) or a few of them (management, media, engineering). A subsample of 158 professional organizations we judged to be directly involved in research significantly more often had statements on research integrity/ethics terminology than the whole sample: an average of 10.4% of organizations with a statement (95% CI = 10.4-23-5%) on any of the 27 research integrity/ethics terms compared to 3.3% (95% CI = 2.1-4.6%), respectively (Porganizations should define research integrity and research ethics issues in their ethics codes and collaborate within and across disciplines to adequately address responsible conduct of research and meet contemporary needs of their communities.

  9. Research Integrity and Research Ethics in Professional Codes of Ethics: Survey of Terminology Used by Professional Organizations across Research Disciplines

    Science.gov (United States)

    Komić, Dubravka; Marušić, Stjepan Ljudevit; Marušić, Ana

    2015-01-01

    Professional codes of ethics are social contracts among members of a professional group, which aim to instigate, encourage and nurture ethical behaviour and prevent professional misconduct, including research and publication. Despite the existence of codes of ethics, research misconduct remains a serious problem. A survey of codes of ethics from 795 professional organizations from the Illinois Institute of Technology’s Codes of Ethics Collection showed that 182 of them (23%) used research integrity and research ethics terminology in their codes, with differences across disciplines: while the terminology was common in professional organizations in social sciences (82%), mental health (71%), sciences (61%), other organizations had no statements (construction trades, fraternal social organizations, real estate) or a few of them (management, media, engineering). A subsample of 158 professional organizations we judged to be directly involved in research significantly more often had statements on research integrity/ethics terminology than the whole sample: an average of 10.4% of organizations with a statement (95% CI = 10.4-23-5%) on any of the 27 research integrity/ethics terms compared to 3.3% (95% CI = 2.1–4.6%), respectively (Pethics concepts used prescriptive language in describing the standard of practice. Professional organizations should define research integrity and research ethics issues in their ethics codes and collaborate within and across disciplines to adequately address responsible conduct of research and meet contemporary needs of their communities. PMID:26192805

  10. Reduced Need of Lubricity Additives in Soybean Oil Blends Under Boundary Lubrication Conditions

    Science.gov (United States)

    Converging prices of vegetable oils and petroleum, along with increased focus on renewable resources, gave more momentum to vegetable oil lubricants. Boundary lubrication properties of four Extreme Pressure (EP) additive blends in conventional Soy Bean Oil (SBO) and Paraffinic Mineral Oil (PMO) of ...

  11. Exploring Ethical Issues Associated with Using Online Surveys in Educational Research

    Science.gov (United States)

    Roberts, Lynne D.; Allen, Peter J.

    2015-01-01

    Online surveys are increasingly used in educational research, yet little attention has focused on ethical issues associated with their use in educational settings. Here, we draw on the broader literature to discuss 5 key ethical issues in the context of educational survey research: dual teacher/researcher roles; informed consent; use of…

  12. A survey of recent applications of TRIGA research reactors

    International Nuclear Information System (INIS)

    Chesworth, R.H.

    1972-01-01

    Some relatively recent, somewhat novel, or unusual applications in the United States were surveyed. Several specific applications will be discussed briefly. They are divided into the major areas of nondestructive testing, medical applications, activation analysis, and special testing

  13. Research progress in airborne surveys of terrestrial gamma radiation

    International Nuclear Information System (INIS)

    Burson, Z.G.

    1974-01-01

    Progress during the last few years in airborne surveys of terrestrial gamma radiation, i.e. in the measuring, recording, and interpreting of gamma ray signals in NaI(Tl) crystals, is discussed. Non-terrestrial background contributions have been accurately characterized. The feasibility of determining the water equivalent of snow cover by aerial survey techniques has been demonstrated. Repeat surveys over areas surrounding reactor sites can now be used to detect average differences of less than 1.0 μR/hr in terrestrial gamma radiation levels. New data acquisition and recording systems allow isotope concentrations and total inventories to be measured in spatial resolutions of a few hundred feet. Aerial survey data have been combined with population distribution data to obtain population exposure values from natural terrestrial gamma radiation around reactor sites

  14. Survey of organizational research climates in three research intensive, doctoral granting universities.

    Science.gov (United States)

    Wells, James A; Thrush, Carol R; Martinson, Brian C; May, Terry A; Stickler, Michelle; Callahan, Eileen C; Klomparens, Karen L

    2014-12-01

    The Survey of Organizational Research Climate (SOuRCe) is a new instrument that assesses dimensions of research integrity climate, including ethical leadership, socialization and communication processes, and policies, procedures, structures, and processes to address risks to research integrity. We present a descriptive analysis to characterize differences on the SOuRCe scales across departments, fields of study, and status categories (faculty, postdoctoral scholars, and graduate students) for 11,455 respondents from three research-intensive universities. Among the seven SOuRCe scales, variance explained by status and fields of study ranged from 7.6% (Advisor-Advisee Relations) to 16.2% (Integrity Norms). Department accounted for greater than 50% of the variance explained for each of the SOuRCe scales, ranging from 52.6% (Regulatory Quality) to 80.3% (Integrity Inhibitors). It is feasible to implement this instrument in large university settings across a broad range of fields, department types, and individual roles within academic units. Published baseline results provide initial data for institutions using the SOuRCe who wish to compare their own research integrity climates. © The Author(s) 2014.

  15. Ionanocarbon Lubricants. The Combination of Ionic Liquids and Carbon Nanophases in Tribology

    Directory of Open Access Journals (Sweden)

    María-Dolores Avilés

    2017-05-01

    Full Text Available The present overview will focus on the tribological applications of what we have called ionanocarbon lubricants, that is, the combination of carbon nanophases (graphene, carbon nanotubes, nanodiamonds, carbon nanodots and room-temperature ionic liquids in new dispersions, blends, or modified nanostructures and their use in tribology, lubrication, and surface engineering as friction-reducing, antiwear, and surface-protecting agents in thin films and composite materials. Further research lines and factors that limit the practical applications of the outstanding research results are also highlighted. The very recent results in these lines of research make this a necessary brief review.

  16. Are Ionic Liquids Good Boundary Lubricants? A Molecular Perspective

    Directory of Open Access Journals (Sweden)

    Romain Lhermerout

    2018-01-01

    Full Text Available The application of ionic liquids as lubricants has attracted substantial interest over the past decade and this has produced a rich literature. The aim of this review is to summarize the main findings about frictional behavior of ionic liquids in the boundary lubrication regime. We first recall why the unusual properties of ionic liquids make them very promising lubricants, and the molecular mechanisms at the origin of their lubricating behavior. We then point out the main challenges to be overcome in order to optimise ionic liquid lubricant performance for common applications. We finally discuss their use in the context of electroactive lubrication.

  17. From red cells to soft porous lubrication.

    Science.gov (United States)

    Wu, Qianhong; Zhu, Zenghao; Nathan, Rungun

    2017-11-01

    In this paper, we report a novel experimental study to examine the lubrication theory for highly compressible porous media (Feng & Weinbaum, JFM, 422, 282, 2000), which was applied to the frictionless motion of red cells over the endothelial surface layer (ESL). The experimental setup consists of a running conveyer belt covered with a porous sheet, and an upper planar board, i.e. planing surface. The pore pressure generation was captured when the planing surface glides over the porous sheet. If the lateral leakage was eliminated, we found that the overall pore pressure's contribution to the total lift, fair 80%, and the friction coefficient η = 0.0981, when U =5 m/s, L =0.381 m, λ = h2/h0 = 1 and k =h2/h1 = 3, where U is the velocity of the conveyor belt; L is the planing surface length; h0, h1 and h2 are the undeformed, leading and trailing edge porous layer thickness, respectively. fair increases with the increase in U, λ and L, while decreases with the increase in k. η decreases with the increase in fair. If lateral pressure leakage exists, the pore pressure generation is reduced by nearly 90%. All the results agreed well with the theoretical predictions. The study here lays the foundation for applying soft porous media for new type of bearing with significantly reduced friction. This research was supported by the National Science Foundation (NSF CBET) under Award No. 1511096.

  18. Getting from neuron to checkmark: Models and methods in cognitive survey research

    NARCIS (Netherlands)

    Holleman, B.C.; Murre, J.M.J.

    2008-01-01

    Since the 1980s much work has been done in the field of Cognitive Survey Research. In an interdisciplinary endeavour, survey methodologists and cognitive psychologists (as well as social psychologists and linguists) have worked to unravel the cognitive processes underlying survey responses: to

  19. The Horonobe Underground Research Laboratory (Tentative name) Project. A program on survey and research performed from earth surface

    International Nuclear Information System (INIS)

    2001-03-01

    The Horonobe Underground Research Laboratory (Tentative name) Project under planning at Horonobe-machi by the Japan Nuclear Cycle Development Institute (JNC) is a research facility on deep underground shown in the Long-term program on research, development and application of nuclear energy (June, 1994)' (LPNE), where some researches on the deep underground targeted at sedimentary rocks are carried out. The plan on The Horonobe Underground Research Laboratory performed at Horonobe-machi' is an about 20 years plan ranging from beginning to finishing of its survey and research, which is carried out by three steps such as 'Survey and research performed from earth surface', 'Survey and research performed under excavation of road', and Survey and research performed by using the road'. The Horonobe Underground Research Laboratory is one of research facilities on deep underground shown its importance in LPNE, and carries out some researches on the deep underground at a target of the sedimentary rocks. And also The Horonobe Underground Research Laboratory confirms some technical reliability and support on stratum disposal shown in the 'Technical reliability on stratum disposal of the high level radioactive wastes. The Second Progress Report of R and D on geological disposal' summarized on November, 1999 by JNC through actual tests and researches at the deep stratum. The obtained results are intended to reflect to disposal business of The Horonobe Underground Research Laboratory and safety regulation and so on performed by the government, together with results of stratum science research, at the Tono Geoscience Center, of geological disposal R and D at the Tokai Works, or of international collaborations. For R and D at the The Horonobe Underground Research Laboratory after 2000, following subjects are shown: 1) Survey technique on long-term stability of geological environment, 2) Survey technique on geological environment, 3) Engineering technique on engineered barrier and

  20. Turbine lubrication fluid varnish mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Farooq, Khalid [Pall Corporation, Port Washington, NY (United States)

    2010-04-15

    Varnish deposits on internal surfaces in turbine lube systems result in a number of adverse operational issues, especially the restriction and sticking of the moving parts of servo- or directional control valves, resulting in their malfunction. The lubrication fluid has limited solvency for the varnish-forming material, hence a typical turbine will have the majority of this material as deposits and a relatively small portion as suspension in the fluid phase, in quasi-equilibrium with the deposits. The lube system needs to be cleaned by removing the suspended varnish-forming material from the fluid phase, which allows the deposits to re-entrain into the fluid phase, until the majority of the transferable deposits are removed and the fluid carries no significant amount of the material to have any adverse effect. The methods used for the removal of varnish from turbine lube systems include chemical cleaning/flushing, electrostatic charge induced agglomeration/retention, and the adsorption of the varnish suspended in the oil on an adsorbent medium. The paper discusses an absorption-based removal method that utilizes a fibrous medium that has pronounced affinity for the removal and retention of the varnish-forming material from the fluid as well as the deposits from surfaces that are in quasi-equilibrium with the varnish precursors in the fluid. The filtration medium is a composite, made with cellulose bonded by specially formulated, temperature-cured resins. The absorptive medium exhibits high structural and chemical integrity and has been thoroughly tested on operating turbines, showing reduction in varnish levels from the critical range to below normal range in a relatively short time. The experience with the utilization of the absorptive medium in laboratory tests and in two operating turbines is presented. (orig.)

  1. Tribology of the lubricant quantized sliding state.

    Science.gov (United States)

    Castelli, Ivano Eligio; Capozza, Rosario; Vanossi, Andrea; Santoro, Giuseppe E; Manini, Nicola; Tosatti, Erio

    2009-11-07

    In the framework of Langevin dynamics, we demonstrate clear evidence of the peculiar quantized sliding state, previously found in a simple one-dimensional boundary lubricated model [A. Vanossi et al., Phys. Rev. Lett. 97, 056101 (2006)], for a substantially less idealized two-dimensional description of a confined multilayer solid lubricant under shear. This dynamical state, marked by a nontrivial "quantized" ratio of the averaged lubricant center-of-mass velocity to the externally imposed sliding speed, is recovered, and shown to be robust against the effects of thermal fluctuations, quenched disorder in the confining substrates, and over a wide range of loading forces. The lubricant softness, setting the width of the propagating solitonic structures, is found to play a major role in promoting in-registry commensurate regions beneficial to this quantized sliding. By evaluating the force instantaneously exerted on the top plate, we find that this quantized sliding represents a dynamical "pinned" state, characterized by significantly low values of the kinetic friction. While the quantized sliding occurs due to solitons being driven gently, the transition to ordinary unpinned sliding regimes can involve lubricant melting due to large shear-induced Joule heating, for example at large speed.

  2. Nanoscale Organic−Inorganic Hybrid Lubricants

    KAUST Repository

    Kim, Daniel

    2011-03-15

    Silica (SiO2) nanoparticles densely grafted with amphiphilic organic chains are used to create a family of organic-inorganic hybrid lubricants. Short sulfonate-functionalized alkylaryl chains covalently tethered to the particles form a dense corona brush that stabilizes them against aggregation. When these hybrid particles are dispersed in poly-α-olefin (PAO) oligomers, they form homogeneous nanocomposite fluids at both low and high particle loadings. By varying the volume fraction of the SiO2 nanostructures in the PAO nanocomposites, we show that exceptionally stable hybrid lubricants can be created and that their mechanical properties can be tuned to span the spectrum from simple liquids to complex gels. We further show that these hybrid lubricants simultaneously exhibit lower interfacial friction coefficients, enhanced wear and mechanical properties, and superior thermal stability in comparison with either PAO or its nanocomposites created at low nanoparticle loadings. Profilometry and energy dispersive X-ray spectroscopic analysis of the wear track show that the enhanced wear characteristics in PAO-SiO2 composite lubricants originate from two sources: localization of the SiO2 particles into the wear track and extension of the elastohydrodynamic lubrication regime to Sommerfeld numbers more than an order of magnitude larger than for PAO. © 2011 American Chemical Society.

  3. Results of the Community Health Applied Research Network (CHARN) National Research Capacity Survey of Community Health Centers.

    Science.gov (United States)

    Song, Hui; Li, Vivian; Gillespie, Suzanne; Laws, Reesa; Massimino, Stefan; Nelson, Christine; Singal, Robbie; Wagaw, Fikirte; Jester, Michelle; Weir, Rosy Chang

    2015-01-01

    The mission of the Community Health Applied Research Network (CHARN) is to build capacity to carry out Patient-Centered Outcomes Research at community health centers (CHCs), with the ultimate goal to improve health care for vulnerable populations. The CHARN Needs Assessment Staff Survey investigates CHCs' involvement in research, as well as their need for research training and resources. Results will be used to guide future training. The survey was developed and implemented in partnership with CHARN CHCs. Data were collected across CHARN CHCs. Data analysis and reports were conducted by the CHARN data coordinating center (DCC). Survey results highlighted gaps in staff research training, and these gaps varied by staff role. There is considerable variation in research involvement, partnerships, and focus both within and across CHCs. Development of training programs to increase research capacity should be tailored to address the specific needs and roles of staff involved in research.

  4. Research Note Pilot survey to assess sample size for herbaceous ...

    African Journals Online (AJOL)

    A pilot survey to determine sub-sample size (number of point observations per plot) for herbaceous species composition assessments, using a wheel-point apparatus applying the nearest-plant method, was conducted. Three plots differing in species composition on the Zululand coastal plain were selected, and on each plot ...

  5. Large Scale Survey Data in Career Development Research

    Science.gov (United States)

    Diemer, Matthew A.

    2008-01-01

    Large scale survey datasets have been underutilized but offer numerous advantages for career development scholars, as they contain numerous career development constructs with large and diverse samples that are followed longitudinally. Constructs such as work salience, vocational expectations, educational expectations, work satisfaction, and…

  6. Mechanics of a gaseous film barrier to lubricant wetting of elastohydrodynamically lubricated conjunctions

    Science.gov (United States)

    Prahl, J. M.; Hamrock, B. J.

    1985-01-01

    Two analytical models, one based on simple hydrodynamic lubrication and the other on soft elastohydrodynamic lubrication, are presented and compared to delineate the dominant physical parameters that govern the mechanics of a gaseous film between a small droplet of lubricant and the outer race of a ball bearing. Both models are based on the balance of gravity forces, air drag forces, and air film lubrication forces and incorporate a drag coefficient C sub D and a lubrication coefficient C sub L to be determined from experiment. The soft elastohydrodynamic lubrication (EHL) model considers the effects of droplet deformation and solid-surface geometry; the simpler hydrodynamic lubrication (HL) model assumes that the droplet remains essentially spherical. The droplet's angular position depended primarily on the ratio of gas inertia to droplet gravity forces and on the gas Reynolds number and weakly on the ratio of droplet gravity forces to surface tension forces (Bond number) and geometric ratios for the soft EHL. An experimental configuration in which an oil droplet is supported by an air film on the rotating outer race of a ball bearing within a pressure-controlled chamber produced measurements of droplet angular position as a function of outer-race velocity droplet size and type, and chamber pressure.

  7. Survey of Postdoctorates at FFRDCs: Final Report [Federally Funded Research and Development Centers

    Energy Technology Data Exchange (ETDEWEB)

    Mulrow, Jeri

    2010-06-30

    The 2009 FFRDC survey collected the total number of postdocs employed by FFRDCs in the United States—categorized by source of support, citizenship, sex, and field of research—as of October 1, 2009. The universe for the 2009 GSS-FFRDC survey was the Master Government List of Federally Funded Research and Development Centers. The 2009 survey also contacted the NIH’s Intramural Research Program because it employs the largest number of postdocs in the federal government. The FFRDC survey collected data via a web instrument. Topics included the type of support the postdocs received (federal and nonfederal), their sex, citizenship, race/ethnicity, and field of research.

  8. Lubricated immersed boundary method in two dimensions

    Science.gov (United States)

    Fai, Thomas G.; Rycroft, Chris H.

    2018-03-01

    Many biological examples of fluid-structure interaction, including the transit of red blood cells through the narrow slits in the spleen and the intracellular trafficking of vesicles into dendritic spines, involve the near-contact of elastic structures separated by thin layers of fluid. Motivated by such problems, we introduce an immersed boundary method that uses elements of lubrication theory to resolve thin fluid layers between immersed boundaries. We demonstrate 2nd-order accurate convergence for simple two-dimensional flows with known exact solutions to showcase the increased accuracy of this method compared to the standard immersed boundary method. Motivated by the phenomenon of wall-induced migration, we apply the lubricated immersed boundary method to simulate an elastic vesicle near a wall in shear flow. We also simulate the dynamics of a vesicle traveling through a narrow channel and observe the ability of the lubricated method to capture the vesicle motion on relatively coarse fluid grids.

  9. Compatibility of refrigerants and lubricants with elastomers

    Energy Technology Data Exchange (ETDEWEB)

    Hamed, G.R.; Seiple, R.H.

    1993-01-01

    The information contained in this report is designed to assist the air-conditioning and refrigeration industry in the selection of suitable elastomeric gasket and seal materials that will prove useful in various refrigerant and refrigeration lubricant environments. 97% of the swell measurements have been made to date. The other 3% of the measurements are contingent on availability of additional R-32. Swell behavior in the fluids have been determined using weight and in situ diameter measurements for the refrigerants and weight, diameter and thickness measurements for the lubricants. Weight and diameter measurements are repeated after 2 and 24 hours for samples removed from the refrigerant test fluids and 24 hours after removal from the lubricants.

  10. Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

  11. Leading survey and research report for fiscal 1999. Survey and research on supercompiler technology; 1999 nendo supercompiler technology no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Survey and research are conducted into the global computing technology and the next-generation parallel computer for their compiler technology and programming environment-related technology, which is for the preparation of basic key technologies for the embodiment of high-performance computing for the next generation, and efforts are exerted to extract and define technological problems and to deliberate a research system to achieve the goal. This fiscal year's achievements are mentioned below. Two territories were provided to be respectively covered by a Parallel Compiler Working Group and a Global Computing Working Group whose activities centered about overseas surveys and short-term reception of researchers from abroad. The Parallel Compiler Working Group was engaged in (1) the technological survey of the latest parallel compiler technology and, in its effort to execute researches under the project, in (2) the materialization of the contents of technology research and development and in (3) the materialization of a technology research and development system. The Global Computing Working Group was engaged in (1) the technological survey of the latest high-performance global computing and in (2) the survey of fields to accept global computing application. (NEDO)

  12. Survey of current electric utility research in Canada

    International Nuclear Information System (INIS)

    1979-11-01

    Information on the research programs of eight Canadian electrical utilities and the Canadian Electrical Association has been compiled. Work done by the National Research Council of Canada is included, but the research done by Atomic Energy of Canada Ltd. is excluded. Projects in the area of nuclear power include work on heat transfer and fluid flow, waste management, materials, and corrosion. (L.L.)

  13. The use of advanced web-based survey design in Delphi research.

    Science.gov (United States)

    Helms, Christopher; Gardner, Anne; McInnes, Elizabeth

    2017-12-01

    A discussion of the application of metadata, paradata and embedded data in web-based survey research, using two completed Delphi surveys as examples. Metadata, paradata and embedded data use in web-based Delphi surveys has not been described in the literature. The rapid evolution and widespread use of online survey methods imply that paper-based Delphi methods will likely become obsolete. Commercially available web-based survey tools offer a convenient and affordable means of conducting Delphi research. Researchers and ethics committees may be unaware of the benefits and risks of using metadata in web-based surveys. Discussion paper. Two web-based, three-round Delphi surveys were conducted sequentially between August 2014 - January 2015 and April - May 2016. Their aims were to validate the Australian nurse practitioner metaspecialties and their respective clinical practice standards. Our discussion paper is supported by researcher experience and data obtained from conducting both web-based Delphi surveys. Researchers and ethics committees should consider the benefits and risks of metadata use in web-based survey methods. Web-based Delphi research using paradata and embedded data may introduce efficiencies that improve individual participant survey experiences and reduce attrition across iterations. Use of embedded data allows the efficient conduct of multiple simultaneous Delphi surveys across a shorter timeframe than traditional survey methods. The use of metadata, paradata and embedded data appears to improve response rates, identify bias and give possible explanation for apparent outlier responses, providing an efficient method of conducting web-based Delphi surveys. © 2017 John Wiley & Sons Ltd.

  14. Tolerance Optimization for Mechanisms with Lubricated Joints

    International Nuclear Information System (INIS)

    Choi, J.-H.; Lee, S.J.; Choi, D.-H.

    1998-01-01

    This paper addresses an analytical approach to tolerance optimization for planar mechanisms with lubricated joints based on mechanical error analysis. The mobility method is applied to consider the lubrication effects at joints and planar mechanisms are stochastically defined by using the clearance vector model for mechanical error analysis. The uncertainties considered in the analysis are tolerances on link lengths and radial clearances and these are selected as design variables. To show the validity of the proposed method for mechanical error analysis, it is applied to two examples, and the results obtained are compared with those of Monte Carlo simulations. Based on the mechanical error analysis, tolerance optimizations are applied to the examples

  15. Database on epidemiological survey in high background radiation research

    International Nuclear Information System (INIS)

    Zhou Sunyuan; Guo Furong; Liu Yusheng

    1992-01-01

    In order to store and check the data of the health survey in high background radiation area (HBRA) and control area in Guangdong Province, and to use these data in future, three databases were set up by using RBASE 5000 database software. (1) HD: the database based on the household registers especially established for the health survey from 1979 to 1986, covering more than 160000 subjects and 2200000 data. (2) DC: the database based on the registration cards of deaths from cancers and all other diseases during the period of 1975-1986 including more than 10000 cases and 260000 data. (3) MCC: the database for the case-control study on mutation-related factors for four kinds of cancers (liver, stomach, lung cancers and leukemia), embracing 626 subjects and close to 90000 data. The data in the databases were checked up with the original records and compared with the manual analytical results

  16. Nuclear power and the public: analysis of collected survey research

    Energy Technology Data Exchange (ETDEWEB)

    Melber, B.D.; Nealey, S.M.; Hammersla, J.; Rankin, W.L.

    1977-11-01

    This executive summary highlights the major findings of a comprehensive synthesis and analysis of over 100 existing surveys dealing with public attitudes toward nuclear power issues. Questions of immediate policy relevance to the nuclear debate are posed and answered on the basis of these major findings. For each issue area, those sections of the report in which more-detailed discussion and presentation of relevant data may be found are indicated.

  17. Nuclear power and the public: analysis of collected survey research

    International Nuclear Information System (INIS)

    Melber, B.D.; Nealey, S.M.; Hammersla, J.; Rankin, W.L.

    1977-11-01

    This executive summary highlights the major findings of a comprehensive synthesis and analysis of over 100 existing surveys dealing with public attitudes toward nuclear power issues. Questions of immediate policy relevance to the nuclear debate are posed and answered on the basis of these major findings. For each issue area, those sections of the report in which more-detailed discussion and presentation of relevant data may be found are indicated

  18. A survey of research in elementary particle physics

    International Nuclear Information System (INIS)

    Baton, J.P.; Cohen-Tannoudji, G.

    1986-05-01

    These notes are devoted to the current trends in elementary particle physics. They are not intended for the training of experts in the field. After a brief historical survey, one discusses the difficulties which have made necessary to move from classical physics to relativistic quantum physics. The main concepts of this new theory are rapidly presented. The experimental methods are discussed within a few typical experiments, already performed or scheduled. The main questions which are still unsolved are rapidly mentioned [fr

  19. A survey of research in elementary particle physics

    International Nuclear Information System (INIS)

    Baton, J.P.; Cohen-Tannoudji, G.

    1986-10-01

    These notes are devoted to the current trends in elementary particle physics. They are not intended for the training of experts in the field. After a brief historical survey, one discusses the difficulties which have made necessary to move from classical physics to relativistic quantum physics. The main concepts of this new theory are rapidly presented. The experimental methods are discussed within a few typical experiments, already performed or scheduled. The main questions which are still unsolved are rapidly mentioned [fr

  20. Development and efficiency assessment of process lubrication for hot forging

    Science.gov (United States)

    Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

    2017-10-01

    The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

  1. Deposited Micro Porous Layer as Lubricant Carrier in Metal Forming

    DEFF Research Database (Denmark)

    Arentoft, Mogens; Bay, Niels; Tang, Peter Torben

    2008-01-01

    as lubricant reservoirs. Conventional friction tests for cold forming; ring compression and double cup extrusion tests are carried out with Molykote DX paste and mineral oil as lubricant. Both lubricants act as intended for the ring compressions test whereas only the low viscosity oil perform successfully...... in the cup extrusion test. For all specimens without the porous coating, high friction conditions are identified....

  2. Developments of New Lubricants for Cold Forging of Stainless Steel

    DEFF Research Database (Denmark)

    Steenberg, Thomas; Christensen, Erik; Olesen, P.

    1997-01-01

    Two new lubricant systems for cold forging of stainless steel have been developed. The main component of these systems are FeCl3 and ZnCa2(PO4)2, respectively. Both lubricant systems have been tested using a backward extrusion test. The results show excellent lubricating properties with respect...

  3. Scale effects in metal-forming friction and lubrication

    DEFF Research Database (Denmark)

    Nielsen, Peter Søe; Paldan, Nikolas Aulin; Calaon, Matteo

    2011-01-01

    Downscaling of metal-forming operations from macro-to microscale implies significant changes caused by size effects. Among these, the friction increases as reported by researchers using indirect test methods such as the ring-compression test and double-cup-extrusion test. In this study, a new test...... equipment is developed for studies of the size effect in metal-forming friction in the range from macro-to microscale. Investigations confirm a significant friction increase when downscaling. Visual inspection of the workpieces shows this to be explained by the amount of open and closed lubricant pockets....

  4. A survey of core research in information systems

    CERN Document Server

    Sidorova, Anna; Torres, Russell; Johnson, Vess

    2013-01-01

    The Information Systems (IS) discipline was founded on the intersection of computer science and organizational sciences, and produced a rich body of research on topics ranging from database design and the strategic role of IT to website design and online consumer behavior. In this book, the authors provide an introduction to the discipline, its development, and the structure of IS research, at a level that is appropriate for emerging and current IS scholars. Guided by a bibliometric study of all research articles published in eight premier IS research journals over a 20-year period, the author

  5. What Factors Influence Where Researchers Deposit their Data? A Survey of Researchers Submitting to Data Repositories

    Directory of Open Access Journals (Sweden)

    Shea Swauger

    2015-02-01

    Full Text Available In order to better understand the factors that most influence where researchers deposit their data when they have a choice, we collected survey data from researchers who deposited phylogenetic data in either the TreeBASE or Dryad data repositories. Respondents were asked to rank the relative importance of eight possible factors. We found that factors differed in importance for both TreeBASE and Dryad, and that the rankings differed subtly but significantly between TreeBASE and Dryad users. On average, TreeBASE users ranked the domain specialization of the repository highest, while Dryad users ranked as equal highest their trust in the persistence of the repository and the ease of its data submission process. Interestingly, respondents (particularly Dryad users were strongly divided as to whether being directed to choose a particular repository by a journal policy or funding agency was among the most or least important factors. Some users reported depositing their data in multiple repositories and archiving their data voluntarily.

  6. The Improvement of Screening the Significant Factors of Oil Blends as Bio lubricant Base Stock

    International Nuclear Information System (INIS)

    Noor Hajarul Ashikin Shamsuddin; Rozaini Abdullah; Zainab Hamzah; Siti Jamilah Hanim Mohd Yusof

    2015-01-01

    A new formulation bio lubricant base stock was developed by blending of waste cooking oil (WCO) with Jatropha curcas oil (JCO). The objective of this research is to evaluate significant factors contributing to the production of oil blends for bio lubricant application. The significant factors used in this study were oil ratio (WCO:JCO), agitation times (min) and agitation speed (rpm). The blended oil bio based lubricant was used to determine the saponification, acid, peroxide and iodine values. The experimental design used in this study was the 2 level-factorial design. In this experiment, it was found that the effect of oil ratio and interaction of oil ratio and agitation speed gave the most significant effect in oil blends as bio lubricant base stock. The highest ratio of oil blend 80 %:20 % WCO:JCO, with low agitation speed of 300 rpm and low agitation time of 30 minutes gave the optimum results. The acid, saponification, peroxide and iodine values obtained were 0.517±0.08 mg KOH/ g, 126.23±1.62 mg/ g, 7.5±2.0 m eq/ kg and 50.42±2.85 mg/ g respectively. A higher ratio of waste cooking oil blends was found to be favourable as bio lubricant base stock. (author)

  7. MIL-L-87177 and CLT:X-10 Lubricants Improve Electrical Connector Fretting Corrosion Behavior

    International Nuclear Information System (INIS)

    AUKLAND, NEIL R.; HANLON, JAMES T.

    1999-01-01

    We have conducted a fretting research project using MIL-L-87177 and CLT: X-10 lubricants on Nano-miniature connectors. When they were fretted without lubricant, individual connectors first exceeded our 0.5 ohm failure criteria from 2,341 to 45,238 fretting cycles. With additional fretting, their contact resistance increased to more than 100,000 ohms. Unmodified MIL-L-87177 lubricant delayed the onset of first failure to between 430,000 and over 20,000,000 fretting cycles. MIL-L-87177 modified by addition of Teflon powder delayed first failure to beyond 5 million fretting cycles. Best results were obtained when Teflon was used and also when both the straight and modified lubricants were poured into and then out of the connector. CLT: X-10 lubricant delayed the onset of first failure to beyond 55 million cycles in one test where a failure was actually observed and to beyond 20 million cycles in another that was terminated without failure. CLT: X-10 recovered an unlubricated connector driven deeply into failure, with six failed pins recovering immediately and four more recovering during an additional 420 thousand fretting cycles. MIL-L-87177 was not able to recover a connector under similar conditions

  8. Abstracts of the 2. survey of research symposium

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The abstracts presented in this issue show scientific accomplishments of scientists working in the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences. Interest of research teams gradually moved from classic biochemistry and physiological chemistry toward molecular biology. One line of research is focused on repair of DNA damages caused by X-rays and UV.

  9. Abstracts of the 2. survey of research symposium

    International Nuclear Information System (INIS)

    1994-01-01

    The abstracts presented in this issue show scientific accomplishments of scientists working in the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences. Interest of research teams gradually moved from classic biochemistry and physiological chemistry toward molecular biology. One line of research is focused on repair of DNA damages caused by X-rays and UV

  10. Survey of research on the optimal design of sea harbours

    Directory of Open Access Journals (Sweden)

    Hassan Diab

    2017-07-01

    Full Text Available The design of harbours, as with any other system design, must be an optimization process. In this study, a global examination of the different constraints in coastal engineering was performed and an optimization problem was defined. The problem has multiple objectives, and the criteria to be minimized are the structure cost and wave height disturbance inside a harbour. As concluded in this survey, the constraints are predefined parameters, mandatory constraints or optional constraints. All of these constraints are categorized into four categories: environmental, fluid mechanical, structural and manoeuvring.

  11. Research on airborne comprehensive survey system of atmosphere quality

    International Nuclear Information System (INIS)

    Yu Zhentao; Yu Yanbin

    1998-01-01

    The global atmosphere pollution is becoming more and more serious, affecting the human existence and development. Besides, the high spectrum resolution remote sensing technique, which has been applied to observe topographic features, identify military objectives and distinguish lithology and vegetation, has the relation to atmosphere quality and is influenced by atmosphere pollution (including radon pollution) and dust content in the atmosphere, it is imperative to monitor atmosphere quality. Based upon the selection of some main parameters evaluating atmospheric quality and necessary equipment, the author introduces the design of multiple airborne comprehensive survey system of atmosphere quality and how to deal with problems that crop up during the hardware designing and software programming

  12. The Role of Solid Lubricants for Brake Friction Materials

    Directory of Open Access Journals (Sweden)

    Werner Österle

    2016-02-01

    Full Text Available This review article comprises of three parts. Firstly, reports of brake manufacturers on the beneficial impact of solid lubricants for pad formulations are surveyed. Secondly, since tribofilms were identified to play a crucial role in friction stabilization and wear reduction, the knowledge about tribofilm structures formed during automotive braking was reviewed comprehensively. Finally, a model for simulating the sliding behavior of tribofilms is suggested and a review on modelling efforts with different model structures related to real tribofilms will be presented. Although the variety of friction composites involved in commercial brake systems is very broad, striking similarities were observed in respect to tribofilm nanostructures. Thus, a generalization of the tribofilm nanostructure is suggested and prerequisites for smooth sliding performance and minimal wear rates have been identified. A minimum of 13 vol % of soft inclusions embedded in an iron oxide based tribofilm is crucial for obtaining the desired properties. As long as the solid lubricants or their reaction products are softer than magnetite, the main constituent of the tribofilm, the model predicts smooth sliding and minimum wear.

  13. Environmental Survey Report for ORNL: Small Mammal Abundance and Distribution Survey Oak Ridge National Environmental Research Park 2009 - 2010

    Energy Technology Data Exchange (ETDEWEB)

    Giffen, Neil R [ORNL; Reasor, R. Scott [Oak Ridge Institute for Science and Education (ORISE); Campbell, Claire L. [Oak Ridge Institute for Science and Education (ORISE)

    2009-12-01

    This report summarizes a 1-year small mammal biodiversity survey conducted on the Oak Ridge National Environmental Research Park (OR Research Park). The task was implemented through the Oak Ridge National Laboratory (ORNL) Natural Resources Management Program and included researchers from the ORNL Environmental Sciences Division, interns in the Oak Ridge Institute for Science and Education Higher Education Research Experiences Program, and ORNL Environmental Protection Services staff. Eight sites were surveyed reservation wide. The survey was conducted in an effort to determine species abundance and diversity of small mammal populations throughout the reservation and to continue the historical inventory of small mammal presence for biodiversity records. This data collection effort was in support of the approved Wildlife Management Plan for the Oak Ridge Reservation, a major goal of which is to maintain and enhance wildlife biodiversity on the Reservation. Three of the sites (Poplar Creek, McNew Hollow, and Deer Check Station Field) were previously surveyed during a major natural resources inventory conducted in 1996. Five new sites were included in this study: Bearden Creek, Rainy Knob (Natural Area 21), Gum Hollow, White Oak Creek and Melton Branch. The 2009-2010 small mammal surveys were conducted from June 2009 to July 2010 on the Oak Ridge National Environmental Research Park (OR Research Park). The survey had two main goals: (1) to determine species abundance and diversity and (2) to update historical records on the OR Research Park. The park is located on the Department of Energy-owned Oak Ridge Reservation, which encompasses 13,580 ha. The primary focus of the study was riparian zones. In addition to small mammal sampling, vegetation and coarse woody debris samples were taken at certain sites to determine any correlations between habitat and species presence. During the survey all specimens were captured and released using live trapping techniques including

  14. Tribology: Friction, lubrication, and wear technology

    Science.gov (United States)

    Blau, Peter J.

    1993-01-01

    The topics are presented in viewgraph form and include the following: introduction and definitions of terms; friction concepts; lubrication technology concepts; wear technology concepts; and tribological transitions. This document is designed for educators who seek to teach these concepts to their students.

  15. Physicochemical properties and lubricant potentials of Blighia ...

    African Journals Online (AJOL)

    Fatty acid methyl ester analysis (FAME) revealed 96.89 % of monounsaturated fatty acids and esters in the range ... uniformity, hardness, disintegration and dissolution characteristics. Conclusion: Blighia sapida seed oil is a potentially useful low-cost tablet lubricant. However ... Products derived from plants sources can be ...

  16. On the lubrication of mechanical face seals

    NARCIS (Netherlands)

    Lubbinge, H.

    1999-01-01

    Hence, in this thesis, a model is presented which is able to calculate a complete Stribeck curve for a mechanical face seal and, as a consequence, the transition from full film to mixed lubrication as a function of the operational conditions. This model is based on a combination of a contact model

  17. Self-lubricating fluid bearing assembly

    International Nuclear Information System (INIS)

    Kapich, D.D.

    1981-01-01

    A sealed self-lubricating fluid bearing assembly is described for circulating fluid in the form of a gas coolant in a nuclear reactor, the power for the circulator being provided by a shaft located within the primary containment vessel. In such a system the reactor coolant is isolated from the fluid region at the far end of the drive shaft. (U.K.)

  18. A quantitative lubricant test for deep drawing

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan L.

    2010-01-01

    A tribological test for deep drawing has been developed by which the performance of lubricants may be evaluated quantitatively measuring the maximum backstroke force on the punch owing to friction between tool and workpiece surface. The forming force is found not to give useful information...

  19. Thermo-hydrodynamic lubrication in hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the thermo-hydrodynamic and the thermo-elasto-hydrodynamic lubrication. The algorithms are methodically detailed and each section is thoroughly illustrated.

  20. Self-lubricating fluorine shaft seal material

    Science.gov (United States)

    Munk, W. R.

    1970-01-01

    Lubricating film is produced by a reaction of fluorine with a composite of aluminum oxide and nickel powder. The rate of nickel fluoride generation is proportional to the rate at which the fluoride is rubbed off the surface, allowing the seal to operate with the lowest possible heating.

  1. 14 CFR 33.71 - Lubrication system.

    Science.gov (United States)

    2010-01-01

    ... arranged that condensed water vapor that might freeze and obstruct the line cannot accumulate at any point... fireproof. (9) Each unpressurized oil tank may not leak when subjected to a maximum operating temperature... supply becomes depleted due to failure of any part of the lubricating system other than the tank itself...

  2. Exploring Low Emission Lubricants for Diesel Engines

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J. M.

    2000-07-06

    A workshop to explore the technological issues involved with the removal of sulfur from lubricants and the development of low emission diesel engine oils was held in Scottsdale, Arizona, January 30 through February 1, 2000. It presented an overview of the current technology by means of panel discussions and technical presentations from industry, government, and academia.

  3. The Lubrication Qualities of Dimethyl Ether (DME)

    DEFF Research Database (Denmark)

    Sivebæk, Ion Marius; Sorenson, Spencer C; Jakobsen, J.

    2002-01-01

    by mixing the DME with reasonable amounts of additives. The main conclusion drawn from these measurements is that a combination of lubricity and viscosity comparable to one of diesel oil cannot be reached in the case of DME unless a huge amount of additive is used. This is not an attractive solution...

  4. Using smartphones in survey research: a multifunctional tool

    OpenAIRE

    Nathalie Sonck; Henk Fernee

    2013-01-01

    Smartphones and apps offer an innovative means of collecting data from the public. The Netherlands Institute for Social Research | SCP has been engaged in one of the first experiments involving the use of a smartphone app to collect time use data recorded by means of an electronic diary. Is it feasible to use smartphones as a data collection tool for social research? What are the effects on data quality? Can we also incorporate reality mining tools in the smartphone app to replace traditional...

  5. The use of screening tests in spacecraft lubricant evaluation

    Science.gov (United States)

    Kalogeras, Chris; Hilton, Mike; Carre, David; Didziulis, Stephen; Fleischauer, Paul

    1993-01-01

    A lubricant screening test fixture has been devised in order to satisfy the need to obtain lubricant performance data in a timely manner. This fixture has been used to perform short-term tests on potential lubricants for several spacecraft applications. The results of these tests have saved time by producing qualitative performance rankings of lubricant selections prior to life testing. To date, this test fixture has been used to test lubricants for 3 particular applications. The qualitative results from these tests have been verified by life test results and have provided insight into the function of various anti-wear additives.

  6. Shear thinning behavior of monolayer liquid lubricant films measured by fiber wobbling method

    International Nuclear Information System (INIS)

    Hamamoto, Y; Itoh, S; Fukuzawa, K; Zhang, H

    2010-01-01

    It is essential to clarify mechanical properties of monolayer lubricant films coated on magnetic disks under shearing motion for designing future hard disk drives with ultra-low flying height. Many of previous researchers reported that strong shear rate dependence of viscoelasticity was one of the typical phenomena observed with molecularly thin liquid films. However, it has not been clarified whether or not perfluoropolyether (PFPE) lubricant films, which are used for the head-disk interface (HDI) lubrication, show shear thinning behavior under actual HDI conditions. In this study, we used the fiber wobbling method that can achieve both highly-sensitive shear force measurement and precise gap control and measured shear rate dependence of viscoelastic properties of monolayer PFPE films coated on the magnetic disk. Our experimental results showed that shear thinning does occur at high shear rate ranged from 10 2 to 10 6 s -1 .

  7. RADIAL FORCE IMPACT ON THE FRICTION COEFFICIENT AND TEMPERATURE OF A SELF-LUBRICATING PLAIN BEARING

    Directory of Open Access Journals (Sweden)

    Nada Bojić

    2017-12-01

    Full Text Available Self-lubricating bearings are available in spherical, plain, flanged journal, and rod end bearing configurations. They were originally developed to eliminate the need for re-lubrication, to provide lower torque and to solve application problems where the conventional metal-to-metal bearings would not perform satisfactorily, for instance, in the presence of high frequency vibrations. Among the dominant tribological parameters of the self-lubricating bearing, two could be singled out: the coefficient of friction and temperature. To determine these parameters, an experimental method was applied in this paper. By using this method, the coefficient of friction and temperature were identified and their correlation was established. The aim of this research was to determine the effect of radial force on tribological parameters in order to predict the behavior of sliding bearings with graphite in real operating conditions.

  8. Simulation of demand (or consumption) of fuel and lubricating oils in countries of Asia

    International Nuclear Information System (INIS)

    Tuzelbaev, B.I.; Khisarov, B.D.

    1997-01-01

    Demand on fuel and lubricating oils mixtures is estimated in transport sector of the Asia countries. Model of demand is constructed with help of co-integration structures and error correction model for definition of fuel and lubricating oils mixtures elasticity. Researches have been conducted with use of program complex in operational medium of the Windows-95. Co-integrating vectors for demand on gasoline were defined by all of considered countries (beside Thailand), for demand on diesel fuel - for Indonesia and South Korea

  9. Research in radiation monitoring survey instrumentation. Final report

    International Nuclear Information System (INIS)

    Blalock, T.V.; Kennedy, E.J.; Phillips, R.G.; Walker, E.W. Jr.

    1978-01-01

    Two low-power solid-state prototype readout units were developed, an LED display and a LCD display. This display output was in a bar-graph format, covering four-decades of information, with 10-segments per decade. The displays accept a frequency input, which is standardly available from several portable radiation-survey instruments. Both readout units will operate on two D-cell batteries (3.0 Volt), with a typical current drain requirement of 0.3 MA for the LED display and 30μA for the LCD display. A wide-range electrometer circuit was also developed. The circuit covers an input current range from 10 -13 A to 10 -8 A. The output signal is a pulse whose frequency is directly proportional to input current. The circuit requires no high-megohm resistors, and is autoranging. Several candidate input amplifiers were analyzed and evaluated for use with the electrometer circuit

  10. Protecting the privacy of family members in survey and pedigree research.

    Science.gov (United States)

    Botkin, J

    2001-01-10

    The recent controversy at Virginia Commonwealth University involving research ethics raises important and complex issues in survey and pedigree research. The primary questions are whether family members of survey respondents themselves become subjects of the project and if they are subjects whether informed consent must be obtained for investigators to retain private information on these individuals. This article provides an analysis of the ethical issues and regulatory standards involved in this debate for consideration by investigators and institutional review boards. The analysis suggests that strong protections for the rights and welfare of subjects and their family members can be incorporated into survey and pedigree research protocols without hindering projects with extensive consent requirements.

  11. A Survey of Comics Research in Computer Science

    Directory of Open Access Journals (Sweden)

    Olivier Augereau

    2018-06-01

    Full Text Available Graphic novels such as comic books and mangas are well known all over the world. The digital transition started to change the way people are reading comics: more and more on smartphones and tablets, and less and less on paper. In recent years, a wide variety of research about comics has been proposed and might change the way comics are created, distributed and read in the future. Early work focuses on low level document image analysis. Comic books are complex; they contains text, drawings, balloons, panels, onomatopoeia, etc. Different fields of computer science covered research about user interaction and content generation such as multimedia, artificial intelligence, human–computer interaction, etc. with different sets of values. We review the previous research about comics in computer science to state what has been done and give some insights about the main outlooks.

  12. Mental Stress from Animal Experiments: a Survey with Korean Researchers.

    Science.gov (United States)

    Kang, Minji; Han, AhRam; Kim, Da-Eun; Seidle, Troy; Lim, Kyung-Min; Bae, SeungJin

    2018-01-01

    Animal experiments have been widely conducted in the life sciences for more than a century, and have long been a subject of ethical and societal controversy due to the deliberate infliction of harm upon sentient animals. However, the harmful use of animals may also negatively impact the mental health of researchers themselves. We sought to evaluate the anxiety level of researchers engaged in animal use to analyse the mental stress from animal testing. The State Anxiety Scale of the State-Trait Anxiety Inventory (STAI) was used to evaluate how researchers feel when they conduct animal, as opposed to non-animal, based experiments (95 non-animal and 98 animal testing researchers). The Trait Anxiety Scale of STAI was employed to measure proneness to anxiety, namely the base trait of the researchers. Additionally, the information on sex, age, education, income, and total working periods was collected. While the Trait Anxiety scores were comparable (41.5 ± 10.9 versus 42.9 ± 10.1, p = 0.3682, t- test), the State Anxiety scores were statistically significantly higher for animal users than non-animal users (45.1 ± 10.7 versus 41.3 ± 9.4, p = 0.011). This trend was consistent for both male and female. Notably, younger animal testers (≤ 30 years of age) with less work experience (≤ 2 years) and lower income level (≤ 27,000 USD) exhibited higher anxiety scores, whereas these factors did not affect the anxiety level of non-animal users. The present study demonstrated that participation in animal experiments can negatively impact the mental health of researchers.

  13. Research on the Danish Longitudinal Survey of Children (DALSC) at the Danish National Centre for Social Research

    DEFF Research Database (Denmark)

    Ottosen, Mai Heide

    2011-01-01

    This article reviews research results obtained using the Danish Longitudinal Survey of Children born in 1995 (DALSC), which is placed at SFI, the Danish National Centre for Social Research. DALSC aims to gain insight into children’s growing-up conditions in contemporary society. DALSC consists of...

  14. Using smartphones in survey research: a multifunctional tool

    NARCIS (Netherlands)

    Nathalie Sonck; Henk Fernee

    2013-01-01

    Smartphones and apps offer an innovative means of collecting data from the public. The Netherlands Institute for Social Research | SCP has been engaged in one of the first experiments involving the use of a smartphone app to collect time use data recorded by means of an electronic diary. Is it

  15. Leading research report for fiscal 1999. Survey and research on 3-dimensional nanotechnogy; 1999 nendo 3D nanotechnology no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The aim is to allow various phenomena characteristic of the nano-scale domain to occur in a wider domain which embraces machines of the ordinary size for the creation of mechanical elements unprecedentedly excellent in function. Surveys were conducted of the elements of basic ultramicroscopic processing technology, such as high-velocity atomic beam processing, chemomechanical processing, micro-transfer processing, and nanoparticle beam processing. Surveys were conducted of optical technologies, such as a large-area holographic device, near-field optical processing, micro-scale optical forming, functional nanofilm, and nano-scale optical matrix formation. Surveys were conducted of the use of ultrasonic waves such as the technology of integrated micro-scale flaw detector, technology of friction drive surface creation, and technologies of ultrasonic bonding, separation, and conveyance. Surveys were conducted of large-area nano-pattern processing, creation of controlled-friction power transmission surface, very high-speed nano-scale structural surface treatment, for their development into high-performance tribological systems. As for structures, the high-performance lubrication surface using a layer of structural molecules and a merger of molecular machines and micro-mechanisms were investigated. Also investigated were their development into biotechnologies (nano-manipulation etc.). (NEDO)

  16. Research on polonium-218 survey technique for uranium

    International Nuclear Information System (INIS)

    Zhou, R.

    1985-01-01

    This article makes an exposition of the principles and procedures of 218 Po survey technique for uranium. The experiments done with 218 Po method on a large scale on the deposits of granite, volcanic rock and carbon-silliceous slate types showed that the method of not only as effective as track method and 210 Po method, but also has the characteristics of its own. The device has higher working efficiency with only 5 minutes needed at each measurement point, and its sensitivity is higher, about 0.7 pulse/136.S (P ci /L). The results of measurement by 218 Po method will not be affected by thorium emanation and there will be no contamination of the scintillation chamber by radon daughter. The ratio of anomalous peak value to the bottom for 218 Po method is proved to be higher than that for track method and 210 Po method. In order to avoid the influence of moisture, the measurement by 218 Po method should be planned to do when it is not a rainy day and the holes must be dug some distance off the ditches and rice fields, thus ensuring the success in applying the method

  17. Children as respondents in survey research: Cognitive development and response quality

    NARCIS (Netherlands)

    Borgers, N.; Leeuw, E.D. de; Hox, J.J.

    2000-01-01

    Although children are no longer a neglected minority in official statistics and surveys, methodological knowledge on how to survey children is still scarce. Researchers have to rely mainly on ad-hoc knowledge from such diverse fields as child psychiatry and educational testing, or extrapolate

  18. Survey Team On: Conceptualisation of the Role of Competencies, Knowing and Knowledge in Mathematics Education Research

    Science.gov (United States)

    Niss, Mogens; Bruder, Regina; Planas, Núria; Turner, Ross; Villa-Ochoa, Jhony Alexander

    2016-01-01

    This paper presents the outcomes of the work of the ICME 13 Survey Team on "Conceptualisation and the role of competencies, knowing and knowledge in mathematics education research". It surveys a variety of historical and contemporary views and conceptualisations of what it means to master mathematics, focusing on notions such as…

  19. Surveying the Field: The Research Model of Women in Librarianship, 1882-1898

    Science.gov (United States)

    McDowell, Kate

    2009-01-01

    Women who promoted library services to children in the United States in the late nineteenth century introduced the systematic use of survey research on library practice to the field of professional librarianship. They created a series of qualitative survey-based reports, the "Reading of the Young" reports, which were presented at ALA conferences…

  20. Lubricant Formulations to Enhance Engine Efficiency in Modern Internal Combustion Engines

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Wai [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Wong, Victor [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Plumley, Michael [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Martins, Tomas [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Gu, Grace [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Tracy, Ian [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Molewyk, Mark [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Park, Soo Youl [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-04-19

    The research program presented aimed to investigate, develop, and demonstrate low-friction, environmentally-friendly and commercially-feasible lubricant formulations that would significantly improve the mechanical efficiency of modern engines without incurring increased wear, emissions or deterioration of the emission-aftertreatment system.

  1. Survey Research in the Forest Science Journals - Insights from Journal Editors

    Directory of Open Access Journals (Sweden)

    Mirjana Stevanov

    2015-06-01

    Full Text Available Background and Purpose: Survey research is one of the most commonly applied approaches in the social sciences. In the forest research it has been used for more than five decades. In spite of that or the fact that the amount of survey-based articles in the forest science journals has increased during the last decade, their share in all articles published in 20 forest science journals (9,372 articles, 2005-2014 is quite modest (3.2%. In our paper we look at the opinions and attitudes of forest science journal editors towards survey research, as their perspective might enlarge our understanding of the use of this approach in the field of forestry. Materials and Methods: We selected 20 forest science journals - 15 from the SCI list and five non-SCI journals and contacted editors of these journals with the self-administered e-mail questionnaire. Data were collected in October 2014 and analyzed by descriptive statistics. The overall response rate was 75%. The assumptions for the study were based on the evidence addressing opinions and attitudes of journal editors from other research fields (finance since no similar study was found in the field of forestry. Results: The majority of editors reported the same review process for survey-based articles as for all others. In two journals, articles with the survey-based content are screened more rigorously and in two journals their publishing is generally discouraged. 40% of journal editors hold the view that no difference should be made between survey research and other types of original research, and another 40% think that survey research should in the first place play a complementary role. As the main strength of survey research editors see the possibility to obtain data unavailable from other sources. They perceive adverse selection and the difficulty to generalize results as the main weaknesses. Conclusions: Editors of forest science journals have similar opinion on survey research as those from the

  2. 5G backhaul challenges and emerging research directions: a survey

    OpenAIRE

    Jaber, Mona; Imran, Muhammad Ali; Tafazolli, Rahim; Tukmanov, Anvar

    2016-01-01

    5G is the next cellular generation and is expected to quench the growing thirst for taxing data rates and to enable the Internet of Things. Focused research and standardization work have been addressing the corresponding challenges from the radio perspective while employing advanced features, such as network densification, massive multiple-input-multiple-output antennae, coordinated multi-point processing, inter-cell interference mitigation techniques, carrier aggregation, and new spectrum ex...

  3. Survey of HTR related research at IRI, Delft, Netherlands

    Energy Technology Data Exchange (ETDEWEB)

    Hoogenboom, J.E.; Wallerbos, E.J.M.; Van der Hagen, T.H.J.J.; Van Dam, H. [Interfaculty Reactor Institute IRI, Delft University of Technology, Delft (Netherlands); Tuerkcan, E. [ECN Nuclear Research, Petten (Netherlands)

    1998-09-01

    High temperature helium-cooled reactors have a large potential for inherent safety. Therefore, several projects on HTR research are being carried out or were carried out at the Interfaculty Reactor Institute (IRI) of the Delft University of Technology in Delft, Netherlands. As part of a larger research programme measurements of core reactivity, reactivity worth of safety rods and of small samples being oscillated in the reactor core were carried out at the PROTEUS facility of the Paul Scherrer Institute at Villigen, Switzerland. Together with other partners in the Netherlands a small inherently safe co-generation plant with a pebble-bed HTR core was designed and analysed. It was verified that such a reactor can operate continuously for 10 years by adding continuously fuel pebbles until the maximum available core height is reached. As a new, innovative, inherently safe reactor type the design of a fluidized-bed reactor with coated fuel particles on a helium gas stream is discussed and results are shown for the analysis of inherent criticality safety under varying coolant flow rates. IRI is also taking part in the new IAEA Co-ordinated Research Programme, which involves participation in the start-up experiments of the Japanese HTTR and carrying out calculations for the core physics benchmark test. 11 refs.

  4. Funder interference in addiction research: An international survey of authors.

    Science.gov (United States)

    Miller, Peter; Martino, Florentine; Gross, Samantha; Curtis, Ashlee; Mayshak, Richelle; Droste, Nicolas; Kypri, Kypros

    2017-09-01

    Scientific research is essential to the development of effective addiction treatment and drug policy. Actions that compromise the integrity of addiction science need to be understood. The aim of this study is to investigate funder (e.g. industry, government or charity) interference in addiction science internationally. Corresponding authors of all 941 papers published in an international specialist journal July 2004 to June 2009 were invited to complete a web questionnaire. A sensitivity analysis with extreme assumptions about non-respondents was undertaken. The questionnaire was completed by 322 authors (response fraction 34%), 36% (n=117) of whom had encountered at least one episode (median=3, Interquartile range=4) of funder interference in their research: 56% in Australasia, 33% in Europe, and 30% in North America. Censorship of research outputs was the most common form of interference. The wording or writing of reports and articles, as well as where, when and how findings were released were the areas in which influence was most often reported. Funder interference in addiction science appears to be common internationally. Strategies to increase transparency in the addiction science literature, including mandatory author declarations concerning the role of the funder, are necessary. Copyright © 2017. Published by Elsevier Ltd.

  5. Comparing web and mail responses in a mixed mode survey in college alcohol use research

    Science.gov (United States)

    McCabe, Sean Esteban; Diez, Alison; Boyd, Carol J.; Nelson, Toben F.; Weitzman, Elissa R.

    2011-01-01

    Objective This exploratory study examined potential mode effects (web versus U.S. mail) in a mixed mode design survey of alcohol use at eight U.S. colleges. Methods Randomly selected students from eight U.S. colleges were invited to participate in a self-administered survey on their alcohol use in the spring of 2002. Data were collected initially by web survey (n =2619) and non-responders to this mode were mailed a hardcopy survey (n =628). Results College students who were male, living on-campus and under 21 years of age were significantly more likely to complete the initial web survey. Multivariate analyses revealed few substantive differences between survey modality and alcohol use measures. Conclusions The findings from this study provide preliminary evidence that web and mail surveys produce comparable estimates of alcohol use in a non-randomized mixed mode design. The results suggest that mixed mode survey designs could be effective at reaching certain college sub-populations and improving overall response rate while maintaining valid measurement of alcohol use. Web surveys are gaining popularity in survey research and more work is needed to examine whether these results can extend to web surveys generally or are specific to mixed mode designs. PMID:16460882

  6. Identifying research priorities for public health research to address health inequalities: use of Delphi-like survey methods.

    Science.gov (United States)

    Turner, S; Ollerhead, E; Cook, A

    2017-10-09

    In the funding of health research and public health research it is vital that research questions posed are important and that funded research meets a research need or a gap in evidence. Many methods are used in the identification of research priorities, however, these can be resource intensive, costly and logistically challenging. Identifying such research priorities can be particularly challenging for complex public health problems as there is a need to consult a number of experts across disciplines and with a range of expertise. This study investigated the use of Delphi-like survey methods in identifying important research priorities relating to health inequalities and framing tractable research questions for topic areas identified. The study was conducted in two phases, both using Delphi-like survey methods. Firstly, public health professionals with an interest in health inequalities were asked to identify research priorities. Secondly academic researchers were asked to frame tractable research questions relating to the priorities identified. These research priorities identified using Delphi-like survey methods were subsequently compared to those identified using different methods. A total of 52 public health professionals and 21 academics across the United Kingdom agreed to take part. The response rates were high, from public health professionals across three survey rounds (69%, 50% and 40%) and from academics across one round (52%), indicating that participants were receptive to the method and motivated to respond. The themes identified as encompassing the most important research priorities were mental health, healthy environment and health behaviours. Within these themes, the topic areas that emerged most strongly included community interventions for prevention of mental health problems and the food and alcohol environment. Some responses received from academic researchers were (as requested) in the form of tractable research questions, whereas others

  7. Surveys of research in the Chemistry Division, Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Grazis, B.M. [ed.

    1992-11-01

    Research reports are presented on reactive intermediates in condensed phase (radiation chemistry, photochemistry), electron transfer and energy conversion, photosynthesis and solar energy conversion, metal cluster chemistry, chemical dynamics in gas phase, photoionization-photoelectrons, characterization and reactivity of coal and coal macerals, premium coal sample program, chemical separations, heavy elements coordination chemistry, heavy elements photophysics/photochemistry, f-electron interactions, radiation chemistry of high-level wastes (gas generation in waste tanks), ultrafast molecular electronic devices, and nuclear medicine. Separate abstracts have been prepared. Accelerator activites and computer system/network services are also reported.

  8. Surveys of research in the Chemistry Division, Argonne National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Grazis, B.M. (ed.)

    1992-01-01

    Research reports are presented on reactive intermediates in condensed phase (radiation chemistry, photochemistry), electron transfer and energy conversion, photosynthesis and solar energy conversion, metal cluster chemistry, chemical dynamics in gas phase, photoionization-photoelectrons, characterization and reactivity of coal and coal macerals, premium coal sample program, chemical separations, heavy elements coordination chemistry, heavy elements photophysics/photochemistry, f-electron interactions, radiation chemistry of high-level wastes (gas generation in waste tanks), ultrafast molecular electronic devices, and nuclear medicine. Separate abstracts have been prepared. Accelerator activites and computer system/network services are also reported.

  9. Experimental verification of nanoparticle jet minimum quantity lubrication effectiveness in grinding

    International Nuclear Information System (INIS)

    Jia, Dongzhou; Li, Changhe; Zhang, Dongkun; Zhang, Yanbin; Zhang, Xiaowei

    2014-01-01

    In our experiment, K-P36 precision numerical control surface grinder was used for dry grinding, minimum quantity lubrication (MQL) grinding, nanoparticle jet MQL grinding, and traditional flood grinding of hardened 45 steel. A three-dimensional dynamometer was used to measure grinding force in the experiment. In this research, experiments were conducted to measure and calculate specific tangential grinding force, frictional coefficient, and specific grinding energy, thus verifying the lubrication performance of nanoparticles in surface grinding. Findings present that compared with dry grinding, the specific tangential grinding force of MQL grinding, nanoparticle jet MQL grinding, and flood grinding decreased by 45.88, 62.34, and 69.33 %, respectively. Their frictional coefficient was reduced by 11.22, 29.21, and 32.18 %, and the specific grinding energy declined by 45.89, 62.34, and 69.45 %, respectively. Nanoparticle jet MQL presented ideal lubrication effectiveness, which was attributed to the friction oil film with strong antifriction and anti-wear features formed by nanoparticles on the grinding wheel/workpiece interface. Moreover, lubricating properties of nanoparticles of the same size (50 nm) but different types were verified through experimentation. In our experiment, ZrO 2 nanoparticles, polycrystal diamond (PCD) nanoparticles, and MoS 2 nanoparticles were used in the comparison of nanoparticle jet MQL grinding. The experimental results manifest that MoS 2 nanoparticles exhibited the optimal lubricating effectiveness, followed by PCD nanoparticles. Our research also integrated the properties of different nanoparticles to analyze the lubrication mechanisms of different nanoparticles. The experiment further verified the impact of nanoparticle concentration on the effectiveness of nanoparticle jet MQL in grinding. The experimental results demonstrate that when the nanoparticle mass fraction was 6 %, the minimum specific tangential grinding force

  10. Preliminary Geological Survey on the Proposed Sites for the New Research Reactor

    International Nuclear Information System (INIS)

    Lim, In Cheol; Ha, J. J.; Oh, K. B.

    2010-12-01

    · Performing the preliminary geological survey on the proposed sites for the new research reactor through the technical service · Ordering a technical service from The Geological Society of Korea · Contents of the geological survey - Confirmation of active fault - Confirmation of a large-scale fracture zone or weak zone - Confirmation of inappropriate items related to the underground water - Confirmation of historical seismicity and instrumental earthquakes data · Synthesized analysis and holding a report meeting · Results of the geological survey - Confirmation of the geological characteristics of the sites and drawing the requirements for the precise geological survey in the future

  11. A survey of critical research areas in the energy segment of restructured electric power markets

    International Nuclear Information System (INIS)

    Nanduri, Vishnu; Das, Tapas K.

    2009-01-01

    Availability of a large volume of recent literature on deregulated (a.k.a. restructured) electricity markets underscores the importance of the research needs to ensure proper design and functioning of the markets. Researchers have made significant contributions fueling the evolution of the fundamental market design changes that have taken place since the beginning of the restructuring process. Due to the vast scope, existing survey papers are focused on particular facets of deregulated electricity markets. We adopt a similar approach by focusing on the most important research areas related to the energy market. The contributions of the survey paper lie in the novel approach used in classifying the literature based on critical research areas. Some areas of research such as auction based pricing, bidding strategy formulation, market equilibria, and market power are reviewed in a different light than other existing survey papers. We conclude by providing some future research directions for the energy markets. (author)

  12. A SURVEY OF ASTRONOMICAL RESEARCH: A BASELINE FOR ASTRONOMICAL DEVELOPMENT

    International Nuclear Information System (INIS)

    Ribeiro, V. A. R. M.; Russo, P.; Cárdenas-Avendaño, A.

    2013-01-01

    Measuring scientific development is a difficult task. Different metrics have been put forward to evaluate scientific development; in this paper we explore a metric that uses the number of peer-reviewed, and when available non-peer-reviewed, research articles as an indicator of development in the field of astronomy. We analyzed the available publication record, using the Smithsonian Astrophysical Observatory/NASA Astrophysics Database System, by country affiliation in the time span between 1950 and 2011 for countries with a gross national income of less than 14,365 USD in 2010. This represents 149 countries. We propose that this metric identifies countries in ''astronomical development'' with a culture of research publishing. We also propose that for a country to develop in astronomy, it should invest in outside expert visits, send its staff abroad to study, and establish a culture of scientific publishing. Furthermore, we propose that this paper may be used as a baseline to measure the success of major international projects, such as the International Year of Astronomy 2009

  13. Turning research into policy: a survey on adolescent condom use.

    Science.gov (United States)

    Phillips, S R

    1995-01-01

    Results from a 1991-92 survey of the condom use beliefs, attitudes, and practices of 373 US inner-city high school students reveal educational policy implications which would further the goal of encouraging sexually active youth to use condoms. First, the issue of sexual desire must be treated realistically. Many teenage girls, as well as boys, want to fulfill their desires by having sexual intercourse. The standard educational approach to teenage boys also assumes that they are sexual exploiters, but this may also simply be a cultural construct rather than a reality. Addressing physical pleasure issues may be particularly important in encouraging condom use, but it would be inappropriate for such discussions to encourage sexual activity. Adolescent ambivalence towards risk taking and mortality must also be considered. Standard definitions of risk (which exclude the health risk of pregnancy) contain the common perception that adolescent males are greater risk-takers than females. When such definitions exclude certain behaviors, the classification of risk becomes a social construct. Adolescents are not completely unaware of the dangers of risky behavior and may even overestimate their chances of getting pregnant or contracting HIV. Adolescents may find the risk of offending a partner to be more important than the risk of contracting a disease in 10 years. When teenagers believe themselves to be in love, they are less likely to insist on condom use. Educators must deconstruct risks and address each one specifically. High levels of knowledge about HIV transmission fail to predict previous, current, or intended condom use. Thus, while facts are important, teenagers also need to learn the social skills surrounding condom use. Students have easy accessibility to condoms, but embarrassment may pose a barrier to acquisition. This embarrassment, however, showed no correlation to actual or intended condom use. By working within the context of the adolescent mind and world

  14. USDOE Top-of-Rail Lubricant Project; FINAL

    International Nuclear Information System (INIS)

    Mohumad F. Alzoubi; George R. Fenske; Robert A. Erck; Amrit S. Boparai

    2002-01-01

    Lubrication of wheel/rail systems has been recognized for the last two decades as a very important issue for railroads. Energy savings and less friction and wear can be realized if a lubricant can be used at the wheel/rail interface. On the other hand, adverse influences are seen in operating and wear conditions if improper or excessive lubrication is used. Also, inefficiencies in lubrication need to be avoided for economic and environmental reasons. The top-of-rail (TOR) lubricant concept was developed by Texaco Corporation to lubricate wheels and rails effectively and efficiently. Tranergy Corporation has been developing its SENTRAEN 2000(trademark) lubrication system for the last ten years, and this revolutionary new high-tech on-board rail lubrication system promises to dramatically improve the energy efficiency, performance, safety, and track environment of railroads. The system is fully computer-controlled and ensures that all of the lubricant is consumed as the end of the train passes. Lubricant quantity dispensed is a function of grade, speed, curve, and axle load. Tranergy also has its LA4000(trademark) wheel and rail simulator, a lubrication and traction testing apparatus. The primary task of this project was collecting and analyzing the volatile and semivolatile compounds produced as the lubricant was used. The volatile organic compounds were collected by Carbotrap cartridges and analyzed by adsorption and gas chromatography/mass spectrometry (GC/MS). The semivolatile fraction was obtained by collecting liquid that dripped from the test wheel. The collected material was also analyzed by GC/MS. Both of these analyses were qualitative. The results indicated that in the volatile fraction, the only compounds on the Environmental Protection Agency's (EPA) Superfund List of Analytes detected were contaminants either in the room air or from other potential contamination sources in the laboratory. Similarly, in the semivolatile fraction none of the detected

  15. Nuclear power and the public: an update of collected survey research on nuclear power

    International Nuclear Information System (INIS)

    Rankin, W.L.; Melber, B.D.; Overcast, T.D.; Nealey, S.M.

    1981-12-01

    The purpose of this research was to collect, analyze, and summarize all of the nuclear power-related surveys conducted in the United States through June 1981, that we could obtain. The surveys collected were national, statewide, and areawide in scope. Slightly over 100 surveys were collected for an earlier, similar effort carried out in 1977. About 130 new surveys were added to the earlier survey data. Thus, about 230 surveys were screened for inclusion in this report. Because of space limitations, national surveys were used most frequently in this report, followed distantly by state surveys. In drawing our conclusions about public beliefs and attitudes toward nuclear power, we placed most of our confidence in survey questions that were used by national polling firms at several points in time. A summary of the research findings is presented, beginning with general attitudes toward nuclear power, followed by a summary of beliefs and attitudes about nuclear power issues, and ended by a summary of beliefs and attitudes regarding more general energy issues

  16. Nuclear power and the public: an update of collected survey research on nuclear power

    Energy Technology Data Exchange (ETDEWEB)

    Rankin, W.L.; Melber, B.D.; Overcast, T.D.; Nealey, S.M.

    1981-12-01

    The purpose of this research was to collect, analyze, and summarize all of the nuclear power-related surveys conducted in the United States through June 1981, that we could obtain. The surveys collected were national, statewide, and areawide in scope. Slightly over 100 surveys were collected for an earlier, similar effort carried out in 1977. About 130 new surveys were added to the earlier survey data. Thus, about 230 surveys were screened for inclusion in this report. Because of space limitations, national surveys were used most frequently in this report, followed distantly by state surveys. In drawing our conclusions about public beliefs and attitudes toward nuclear power, we placed most of our confidence in survey questions that were used by national polling firms at several points in time. A summary of the research findings is presented, beginning with general attitudes toward nuclear power, followed by a summary of beliefs and attitudes about nuclear power issues, and ended by a summary of beliefs and attitudes regarding more general energy issues.

  17. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  18. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  19. Environmental survey at Lucas Heights Research Laboratories, 1991

    International Nuclear Information System (INIS)

    Hoffmann, E.L.; Looz, T.

    1994-05-01

    In common with many other nuclear facilities, ANSTO undertakes an extensive program of meteorological measurements. The prime reason for such a program is to allow estimates to be made of the downwind concentration of any airborne pollutants, particularly radionuclides, released from the site through routine operations or under accident conditions. The data collection from this program provide the necessary input to the atmospheric dispersion model called ADDCOR (ANSTO 1989) which can be used to compute the effective dose to an individual due to the routine airborne or accidental release of radionuclides from the LHRL. None of the samples taken from possible human food chains in the vicinity of the Lucas Heights Research Laboratories contained radioactivity which could be attributed to the operation of the site. Discharges of airborne radioactive gases were within authorised limits when averaged over the year. The dose to the most sensitive members of the public from iodine-131 release, was -3 mSv/year and the calculated dose from released noble gases to the most exposed individuals was less than 0.01 mSv/year. These figures represent less than one per cent of the most restrictive limits recommended by the National Health and Medical Research Council of Australia. The annual average liquid effluent discharge to the Water Board Sewer during 1991 was less than 29 per cent of the permitted level. For tritium, the concentration was less than 2 per cent of the specified limit. The data presented in this report clearly shows that the environmental impact of operations at LHRL has been very low. The effective dose to residents living in the immediate neighbourhood of the reactor are very difficult to measure directly but calculated dose estimates are far lower than those due to natural background radiation and medical exposures. 24 refs., 19 tabs., 4 figs

  20. Lubricant effects on low Dk and silicone hydrogel lens comfort.

    Science.gov (United States)

    Ozkan, Jerome; Papas, Eric

    2008-08-01

    To investigate the influence of three lubricants of varying viscosity, on postinsertion and 6 h comfort with contact lens wear. Comfort and associated symptoms of dryness were assessed in 15 experienced contact lens wearers. Subjects wore a low Dk lens in one eye and a silicone hydrogel in the other and participated in four separate trials involving no lubricant (baseline), saline, and two commercially available lubricants of differing viscosity. The in-eye lubricants were used immediately following lens insertion and every 2 h postinsertion for a 6 h wear period. Postlens insertion comfort was significantly better for both lens types when lubricants or saline were used compared with no lubricant use. After 6 h lens wear, comfort was influenced by lens type and not by in-eye lubricant or saline use. Also after 6 h lens wear, less dryness sensation was reported for silicone hydrogel lenses when using lubricants but not saline. Although lubricant use does help reduce dryness symptoms with silicone hydrogel lens wear, there appears to be minimal longer-term benefit to comfort. Furthermore, increased lubricant viscosity did not lead to improved longer-term comfort.

  1. Experience with synthetic fluorinated fluid lubricants

    Science.gov (United States)

    Conley, Peter L.; Bohner, John J.

    1990-01-01

    Since the late 1970's, the wet lubricant of choice for space mechanisms has been one of the family of synthetic perfluoro polyalkylether (PFPE) compounds, namely Fomblin Z-25 (Bray-815Z) or DuPont's Krytox 143xx series. While offering the advantages of extremely low vapor pressures and wide temperature ranges, these oils and derived greases have a complex chemistry compared to the more familiar natural and synthetic hydrocarbons. Many aerospace companies have conducted test programs to characterize the behavior of these compounds in a space environment, resulting in a large body of hard knowledge as well as considerable space lore concerning the suitability of the lubricants for particular applications and techniques for successful application. The facts are summarized and a few myths about the compounds are dispelled, and some performance guidelines for the mechanism design engineer are provided.

  2. Noise of oil lubricated journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2002-01-01

    The purpose of the paper is to provide a procedure to calculate the noise of oil lubricated journal bearings. To do this, the nonlinear transient analysis of rotor-bearing system including rotor imbalance is performed. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Furthermore, a transmission theory of plane waves on a boundary of the outer surface of the bearing is used to obtain the sound pressure level of the bearing. Results show that the sound pressure level of the bearing can be increased with the rotational speed of the rotor although the whirl amplitude of the rotor is decreased at high speed. Noise estimating procedures presented in this paper could be an aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

  3. A survey of theoretical research on the EXTRAP concept

    International Nuclear Information System (INIS)

    Lehnert, B.

    1988-12-01

    A review is given of the theoretical analysis on the Extrap concept which consists of a Z-pinch being immersed in an octupole field generated by currents in a set of external conductors. This analysis includes research on plasma breakdown and start-up, equilibrium and stability, in terms of MHD and kinetic theory. Extrap theory includes an extensive area of diversified problems, being related to a high beta value, a non-circular plasma cross section with a magnetic separatrix, and strongly inhomogeneous plasma conditions in space. This also leads to unexplored and important areas of plasma physics, reaching far beyond the special applications to the Extrap configuration. At present progress has been made in the analysis of breakdown, of dissipation-free equilibria, and in identifying the instability modes and possible stabilizing meachanisms in Extrap. Nevertheless much work still remains within the area of dissipative equilibria and transport, as well as in the efforts to reach a complete theoretical understanding of the experimentally observed stability. (115 refs.)

  4. Research and survey of structural materials for fast breeder reactor

    International Nuclear Information System (INIS)

    Baba, Kyozi

    1986-01-01

    In the development of FBRs, the selection of the materials for high temperature use is an important factor which determines the reliability of plants. The materials for secondary sodium system equipment centering around steam generators are affected by the type of steam generators, economical efficiency, aseismatic ability, fuel design and the method of removing core decay heat. At present, the conceptual design of demonstration FBRs (tank type, loop type) is in progress, and the research on the materials for steam generator tubes was completed in fiscal year 1984 by 10 electric power companies and 4 other companies. The four kinds of the steel tested were modified 9Cr-1Mo steel, 9Cr-2Mo steel, 12Cr-1Mo-V-Nb steel and Alloy 800. The specifications of the modified 9Cr-1Mo steel and Alloy 800 are shown. The results of tensile strength, creep strength, fatique strength, the characteristics after high temperature heating, weldability, and the strength of welded joints are reported. Also the weight of heating tubes was compared. The results of the general evaluation showed that 9Cr group steels were most promising. The matters to be examined hereafter are pointed out. (Kako, I.)

  5. Technology development for indigenous water lubricated bearings

    International Nuclear Information System (INIS)

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2010-01-01

    Water Lubricated Bearings (WLB) are used in various mechanisms of fuel handling systems of PHWRs and AHWR. Availability and random failures of these bearings was a major factor in refuelling operations. Indigenous development of these bearings was taken up and 7 types of antifriction bearings in various sizes (totaling 37 variants) for PHWR, AHWR and Dhruva applications were successfully developed. This paper deals with various aspects of WLB development. (author)

  6. Evaluation of minimum quantity lubrication grinding with nano-particles and recent related patents.

    Science.gov (United States)

    Li, Changhe; Wang, Sheng; Zhang, Qiang; Jia, Dongzhou

    2013-06-01

    In recent years, a large number of patents have been devoted to developing minimum quantity lubrication (MQL) grinding techniques that can significantly improve both environmentally conscious and energy saving and costeffective sustainable grinding fluid alternatives. Among them, one patent is about a supply system for the grinding fluid in nano-particle jet MQL, which produced MQL lubricant by adding solid nano-particles in degradable grinding fluid. The MQL supply device turns the lubricant to the pulse drops with fixed pressure, unchanged pulse frequency and the same drop diameter. The drops will be produced and injected in the grinding zone in the form of jet flow under high pressure gas and air seal. As people become increasingly demanding on our environment, minimum quantity lubrication has been widely used in the grinding and processing. Yet, it presents the defect of insufficient cooling performance, which confines its development. To improve the heat transfer efficiency of MQL, nano-particles of a certain mass fraction can be added in the minimum quantity of lubricant oil, which concomitantly will improve the lubrication effects in the processing. In this study, the grinding experiment corroborated the effect of nano-particles in surface grinding. In addition, compared with other forms of lubrication, the results presented that the grinding force, the friction coefficient and specific grinding energy of MQL grinding have been significantly weakened, while G ratio greatly rose. These are attributed to the friction oil-film with excellent anti-friction and anti-wear performance, which is generated nano-particles at the wheel/workpiece interface. In this research, the cooling performance of nano-particle jet MQL was analyzed. Based on tests and experiments, the surface temperature was assayed from different methods, including flood lubricating oil, dry grinding, MQL grinding and nano-particle jet MQL grinding. Because of the outstanding heat transfer

  7. Consumer and community involvement in health and medical research: evaluation by online survey of Australian training workshops for researchers.

    Science.gov (United States)

    McKenzie, Anne; Alpers, Kirsten; Heyworth, Jane; Phuong, Cindy; Hanley, Bec

    2016-01-01

    In Australia, since 2009, the Consumer and Community Involvement Program (formerly the Consumer and Community Participation Program) has developed and run workshops to help people working in health and medical research involve more consumers (patients) and community members (the public) in their research. In 2012, workshop attendees were invited to do an online survey to find out the effect, if any, that attending a workshop had on their awareness of and attitudes to consumer and community involvement. They were also asked about changes in their behaviour when it came to the involvement of consumers and the community in their work. The study found that, for people who answered the survey, more than double the number found consumer and community involvement very relevant after attending a workshop, compared with the number who thought that before attending one. Also, amongst those who answered the survey, 94 % thought that the workshop increased their understanding about involvement. Background There is limited evidence of the benefits of providing training workshops for researchers on how to involve consumers (patients) and the community (public) in health and medical research. Australian training workshops were evaluated to contribute to the evidence base. The key objective was to evaluate the impact of the workshops in increasing awareness of consumer and community involvement; changing attitudes to future implementation of involvement activities and influencing behaviour in the methods of involvement used. A secondary objective was to use a formal evaluation survey to build on the anecdotal feedback received from researchers about changes in awareness, attitudes and behaviours. Methods The study used a cross-sectional, online survey of researchers, students, clinicians, administrators and members of non-government organisations who attended Consumer and Community Involvement Program training workshops between 2009 and 2012 to ascertain changes to awareness

  8. Universal water-dilutable inhibited protective lubricants

    International Nuclear Information System (INIS)

    Mamtseva, M.V.; Kardash, N.V.; Latynina, M.B.

    1993-01-01

    In the interest of environmental protection, improvement of working conditions, and reduced fire hazard in production operations, water-based protective lubricants are now available in a wide assortment, and the production volume has increased greatly. The term water-dilutable inhibited protective lubricants (WDIPL) means water-soluble, water-emulsifiable, or water-dispersible products with the dual function of reducing friction and wear and protecting metal surfaces against corrosion for specified periods of time. According to the standard Unified System of Protection Against Corrosion and Aging (COST 9.103-78), WDIPLs are classed as products for the temporary corrosion protection of metals and end-items. In the general class of WDIPLs one can identify water-dilutable combination corrosion inhibitors, film-forming inhibited petroleum compositions (FIPC-d), detergent-preservative fluids, operational-preservative lubricating-cooling process compounds (ICPC), and, finally, universal multifunctional products. Combined corrosion inhibitors may consist of water-soluble organic and inorganic compounds; water/oil and oil-soluble surfactants - corrosion inhibitors of the chemisorption type or donor and/or acceptor types; shielding inhibitors of the adsorption type; and fast-acting water-displacing components. 23 refs

  9. Engine Environment Research Facility (EERF)

    Data.gov (United States)

    Federal Laboratory Consortium — Description: This facility supports research and development testing of the behavior of turbine engine lubricants, fuels and sensors in an actual engine environment....

  10. CHAracteristics of research studies that iNfluence practice: a GEneral survey of Canadian orthopaedic Surgeons (CHANGES): a pilot survey.

    Science.gov (United States)

    de Sa, Darren; Thornley, Patrick; Evaniew, Nathan; Madden, Kim; Bhandari, Mohit; Ghert, Michelle

    2015-01-01

    Evidence Based Medicine (EBM) is increasingly being applied to inform clinical decision-making in orthopaedic surgery. Despite the promotion of EBM in Orthopaedic Surgery, the adoption of results from high quality clinical research seems highly unpredictable and does not appear to be driven strictly by randomized trial data. The objective of this study was to pilot a survey to determine if we could identify surgeon opinions on the characteristics of research studies that are perceived as being most likely to influence clinical decision-making among orthopaedic surgeons in Canada. A 28-question electronic survey was distributed to active members of the Canadian Orthopaedic Association (COA) over a period of 11 weeks. The questionnaire sought to analyze the influence of both extrinsic and intrinsic characteristics of research studies and their potential to influence practice patterns. Extrinsic factors included the perceived journal quality and investigator profiles, economic impact, peer/patient/industry influence and individual surgeon residency/fellowship training experiences. Intrinsic factors included study design, sample size, and outcomes reported. Descriptive statistics are provided. Of the 109 members of the COA who opened the survey, 95 (87%) completed the survey in its entirety. The overall response rate was 11% (95/841). Surgeons achieved consensus on the influence of three key designs on their practices: 1) randomized controlled trials 94 (99%), 2) meta-analysis 83 (87%), and 3) systematic reviews 81 (85%). Sixty-seven percent of surgeons agreed that studies with sample sizes of 101-500 or more were more likely to influence clinical practice than smaller studies (n = design influencing adoption included 1) reputation of the investigators (99%) and 2) perceived quality of the journal (75%). Although study design and sample size (i.e. minimum of 100 patients) have some influence on clinical decision making, surgeon respondents are equally influenced

  11. Molecular dynamics simulations of elasto-hydrodynamic lubrication and boundary lubrication for automotive tribology

    International Nuclear Information System (INIS)

    Washizu, Hitoshi; Sanda, Shuzo; Hyodo, Shi-aki; Ohmori, Toshihide; Nishino, Noriaki; Suzuki, Atsushi

    2007-01-01

    Friction control of machine elements on a molecular level is a challenging subject in vehicle technology. We describe the molecular dynamics studies of friction in two significant lubrication regimes. As a case of elastohydrodynamic lubrication, we introduce the mechanism of momentum transfer related to the molecular structure of the hydrocarbon fluids, phase transition of the fluids under high pressure, and a submicron thickness simulation of the oil film using a tera-flops computer. For boundary lubrication, the dynamic behavior of water molecules on hydrophilic and hydrophobic silicon surfaces under a shear condition is studied. The dynamic structure of the hydrogen bond network on the hydrophilic surface is related to the low friction of the diamond-like carbon containing silicon (DLC-Si) coating

  12. Lubricant flow analysis for effective lubrication of tractor forward/reverse clutch

    Directory of Open Access Journals (Sweden)

    Daekyung Noh

    2017-04-01

    Full Text Available Owing to the high power requirements of tractors, their low-power transmission gears often experience durability problems such as burning of the clutch. The operation of tractors under high load conditions also causes clutch slip, with the consequent longer operation duration exacerbating the burning of the friction plate. Solving this problem requires effective lubricant distribution. This was achieved in the present study by the development of an analysis model for predicting the lubricant flow rate. The reliability of the model was verified by comparing its predictions for various operation conditions with experimental measurements. Using the model, it was determined that effective distribution of the lubricant could be achieved without significant modification of the system, by only adjusting the gaps between the clutch piston and the housing, and between the separation plates and the case. Keywords: Mechanical engineering

  13. Environmental Survey preliminary report, Laboratory for Energy-Related Health Research, Davis, California

    International Nuclear Information System (INIS)

    1988-03-01

    This report presents the preliminary findings from the first phase of the Survey of the United States Department of Energy (DOE) Laboratory for Energy-Related Health Research (LEHR) at the University of California, Davis (UC Davis), conducted November 16 through 20, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LEHR. The Survey covers all environmental media and all areas of environmental regulation, and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the LEHR and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the LEHR at UC Davis. The Interim Report will reflect the final determinations of the LEHR Survey. 75 refs., 26 figs., 23 tabs

  14. Consumer and community involvement in health and medical research: evaluation by online survey of Australian training workshops for researchers

    OpenAIRE

    McKenzie, Anne; Alpers, Kirsten; Heyworth, Jane; Phuong, Cindy; Hanley, Bec

    2016-01-01

    Plain English Summary In Australia, since 2009, the Consumer and Community Involvement Program (formerly the Consumer and Community Participation Program) has developed and run workshops to help people working in health and medical research involve more consumers (patients) and community members (the public) in their research. In 2012, workshop attendees were invited to do an online survey to find out the effect, if any, that attending a workshop had on their awareness of and attitudes to con...

  15. Empirical research on dictionary use in foreign-language learning: survey and discussion

    NARCIS (Netherlands)

    Hulstijn, J.H.; Atkins, B.T.S.; Atkins, B.T.S.

    1998-01-01

    This paper begins with a brief survey, in the form of a classified bibliography of research into dictionary use. A discussion follows of the type of research required in order to increase one's insight into the cognitive processes involved in using a dictionary; the principal factors which affect

  16. Survey Regarding the Competence and Interest towards Research of Romanian University Students

    Science.gov (United States)

    Demjén, Beátrix-Aletta; Ciascai, Liliana

    2017-01-01

    The purpose of this study is to find out the respondents' opinion regarding their abilities and interest towards research. The survey was carried out on a sample of 51 respondents that are involved in research activities in the universities of origin. The participants are students from Faculties of Real and Applied Sciences. The results highlight…

  17. A Survey on Clinical Research Training Status and Needs in Public Hospitals from Shenzhen

    Science.gov (United States)

    Ji, Ping; Wang, Haibo; Zhang, Chao; Liu, Min; Zhou, Liping; Xiao, Ping; Wang, Yanfang; Wu, Yangfeng

    2017-01-01

    Objective: To obtain information on the current clinical research training status and evaluate the training needs comprehensively for medical staff in hospitals. Methods: This survey was initiated and conducted by the Health and Family Planning Commission of Shenzhen in conjunction with the Peking University Clinical Research Institute (Shenzhen)…

  18. Proper survey methods for research of aquatic plant ecology and management

    Science.gov (United States)

    Proper survey methods are essential for objective, quantitative assessment of the distribution and abundance of aquatic plants as part of research and demonstration efforts. For research, the use of the appropriate method is an essential part of the scientific method, to ensure that the experimenta...

  19. Diseases and their management strategies take top research priority in watermelon research and development group member’s survey

    Science.gov (United States)

    Watermelon is an important crop grown for its delicious fruit in the U.S. and in many countries across the world. A survey of members of Watermelon Research and Development Group (WRDG) was conducted via email and during WRDG meetings in 2014 and 2015 in an effort to identify and rank important rese...

  20. Molecular dynamics study of lubricant depletion by pulsed laser heating

    Science.gov (United States)

    Seo, Young Woo; Rosenkranz, Andreas; Talke, Frank E.

    2018-05-01

    In this study, molecular dynamics simulations were performed to numerically investigate the effect of pulsed laser heating on lubricant depletion. The maximum temperature, the lubricant depletion width, the number of evaporated lubricant beads and the number of fragmented lubricant chains were studied as a function of laser peak power, pulse duration and repetition rate. A continuous-wave laser and a square pulse laser were simulated and compared to a Gaussian pulse laser. With increasing repetition rate, pulsed laser heating was found to approach continuous-wave laser heating.

  1. Effect of gamma radiation on graphite - PTFE dry lubrication system

    Science.gov (United States)

    Singh, Sachin; Tyagi, Mukti; Seshadri, Geetha; Tyagi, Ajay Kumar; Varshney, Lalit

    2017-12-01

    An effect of gamma radiation on lubrication behavior of graphite -PTFE dry lubrication system has been studied using (TR-TW-30L) tribometer with thrust washer attachment in plane contact. Different compositions of graphite and PTFE were prepared and irradiated by gamma rays. Gamma radiation exposure significantly improves the tribological properties indicated by decrease in coefficient of friction and wear properties of graphite -PTFE dry lubrication system. SEM and XRD analysis confirm the physico-chemical modification of graphite-PTFE on gamma radiation exposure leading to a novel dry lubrication system with good slip and anti friction properties.

  2. Lubricating graphene with a nanometer-thick perfluoropolyether

    International Nuclear Information System (INIS)

    Kozbial, Andrew; Li, Zhiting; Iasella, Steven; Taylor, Alexander T.; Morganstein, Brittni; Wang, Yongjin; Sun, Jianing; Zhou, Bo; Randall, Nicholas X.; Liu, Haitao; Li, Lei

    2013-01-01

    Due to its atomic thickness (thinness), the wear of graphene in nanoscale devices or as a protective coating is a serious concern. It is highly desirable to develop effective methods to reduce the wear of graphene. In the current paper, the effect of a nano-lubricant, perfluoropolyether, on the wear of graphene on different substrates is investigated. Graphene was synthesized by chemical vapor deposition (CVD) and characterized by Raman spectroscopy. The nano-lubricant is applied on the graphene by dip-coating. The friction and wear of graphene samples are characterized by nanotribometer, AFM, optical microscopy and Raman spectroscopy. The results showed that lubricating silicon/graphene with nano-lubricant reduces the friction but increases the wear. However, lubricating nickel/graphene with nano-lubricant has little effect on the friction but reduce the wear significantly. The underlying mechanism has been discussed on the basis of the graphene–substrate adhesion and the roughness. The current study provides guidance to the future design of graphene-containing devices. - Highlights: • The effect of a nano-lubricant on the friction and wear of CVD graphene was studied. • Lubricating Graphene/Si results in lower friction but higher wear. • Lubricating Ggraphene/Ni results in lower wear but unchanged friction. • The mechanisms were discussed based on the roughness and interfacial adhesion

  3. Evaluating survey quality in health services research: a decision framework for assessing nonresponse bias.

    Science.gov (United States)

    Halbesleben, Jonathon R B; Whitman, Marilyn V

    2013-06-01

    To address the issue of nonresponse as problematic and offer appropriate strategies for assessing nonresponse bias. A review of current strategies used to assess the quality of survey data and the challenges associated with these strategies is provided along with appropriate post-data collection techniques that researchers should consider. Response rates are an incomplete assessment of survey data quality, and quick reactions to response rate should be avoided. Based on a five-question decision making framework, we offer potential ways to assess nonresponse bias, along with a description of the advantages and disadvantages to each. It is important that the quality of survey data be considered to assess the relative contribution to the literature of a given study. Authors and funding agencies should consider the potential effects of nonresponse bias both before and after survey administration and report the results of assessments of nonresponse bias in addition to response rates. © Health Research and Educational Trust.

  4. Characteristics of research tracks in dermatology residency programs: a national survey.

    Science.gov (United States)

    Narala, Saisindhu; Loh, Tiffany; Shinkai, Kanade; Paravar, Taraneh

    2017-12-15

    Pursuing research is encouraged in dermatology residency programs. Some programs offer specific research or investigative tracks. Currently, there is little data on the structure or scope of research tracks in dermatology residency programs. An anonymous online survey was distributed to the Association of Professors of Dermatology listserve in 2016. Program directors of dermatology residency programs in the United States were asked to participate and 38 of the 95 program directors responded. The survey results confirmed that a 2+2 research track, which is two years of clinical training followed by two years of research, was the most common investigator trackmodel and may promote an academic career at the resident's home institution. Further studies will help determine the most effective research track models to promote long-term outcomes.

  5. Full Life Wind Turbine Gearbox Lubricating Fluids

    Energy Technology Data Exchange (ETDEWEB)

    Lutz, Glenn A.; Jungk, Manfred; Bryant, Jonathan J.; Lauer, Rebecca S.; Chobot, Anthony; Mayer, Tyler; Palmer, Shane; Kauffman, Robert E.

    2012-02-28

    Industrial gear box lubricants typically are hydrocarbon based mineral oils with considerable amounts of additives to overcome the lack of base fluid properties like wear protection, oxidation stability, load carrying capacity, low temperature solidification and drop of viscosity at higher temperatures. For today's wind turbine gearboxes, the requirements are more severe and synthetic hydrocarbon oils are used to improve on this, but all such hydrocarbon based lubricants require significant amounts of Extreme Pressure (EP) additives to meet performance requirements. Perfluoropolyether (PFPE) fluids provide load carrying capacity as an inherent property. During the course of the project with the main tasks of 'Establish a Benchmark', 'Lubricant Evaluation', 'Full Scale Gearbox Trial' and 'Economic Evaluation', the PAO Reference oil exhibited significant changes after laboratory gear testing, in service operation in the field and full scale gearbox trial. Four hydrocarbon base oils were selected for comparison in the benchmarking exercise and showed variation with respect to meeting the requirements for the laboratory micro-pitting tests, while the PFPE fluid exceeded the requirements even with the material taken after the full scale gear box trial. This is remarkable for a lubricant without EP additives. Laboratory bearing tests performed on the PFPE fluids before and after the full scale gear box trial showed the results met requirements for the industry standard. The PFPE fluid successfully completed the full scale gear box test program which included baseline and progressive staged load testing. The evaluation of gears showed no micro-pitting or objectionable wear. By the final stage, lubricant film thickness had been reduced to just 21% of its original value, this was by design and resulted in a lambda ratio of well below 1. This test design scenario of a low lambda ratio is a very undesirable lubrication condition

  6. New formulations of sunflower based bio-lubricants with high oleic acid content – VOSOLUB project

    Directory of Open Access Journals (Sweden)

    Leao J. D.

    2016-09-01

    Full Text Available VOSOLUB project is a demonstration project supported by Executive Agency for Small and Medium-sized Enterprises (EASME that aims at testing under real operating conditions new formulations of sunflower-based biolubricants with high oleic acid content. These biolubricant formulations (including hydraulic fluids, greases, and neat oil metal-working fluids will be tested in three European demonstrating sites. Their technical performance will be evaluated and compared to corresponding mineral lubricants ones. In order to cover the demand for the sunflower base oil, a European SMEs network will be established to ensure the supply of the base at a competitive market price. Results presented concerns the base oil quality confirmed to be in accordance with the specification required, in particular on Free Fatty acid content, Phosphorus content, rancimat induction time and oleic acid content (ITERG. The oil characteristics specific for lubricant application analyzed by BfB Oil Research under normalized methods, match with lubricant specifications requirement such as viscosity, cold & hot properties, surface properties, anti-oxidant properties and thermal stability, anti-wear and EP properties, anti-corrosion properties Performance of the new biolubricant have been assessed by formulators and TEKNIKER First results on the use of new lubricant on real condition for rail Grease (produced by RS CLARE and tested with Sheffield Supertram, Hydraulic oil (produced by BRUGAROLAS and cutting oil (produced by MOTUL TECH and tested with innovative machining, turning are described.

  7. Influences of lubricant pocket geometry and working conditions upon micro lubrication mechanisms in upsetting and strip drawing

    DEFF Research Database (Denmark)

    Shimizu, Ichiro; Martins, P. A. F.; Bay, Niels

    2010-01-01

    , during upsetting and strip drawing, by means of a rigid-viscoplastic finite-element formulation. Special emphasis is placed on the effect of pocket geometry on the build-up of hydrostatic pressure, which is responsible for the onset of micro-lubrication mechanisms. A good agreement is found between......Micro-lubricant pockets located in the surface of plastically deforming workpieces are recognised to improve the performance of fluid lubrication in a metal-forming process. This work investigates the joint influence of pocket geometry and process working conditions on micro-lubrication mechanisms...

  8. Ultralow Friction Self-Lubricating Nanocomposites with Mesoporous Metal-Organic Frameworks as Smart Nanocontainers for Lubricants.

    Science.gov (United States)

    Zhang, Guoliang; Xie, Guoxin; Si, Lina; Wen, Shizhu; Guo, Dan

    2017-11-01

    Smart nanocontainers with stimuli-responsive property can be used to fabricate a new kind of self-lubricating nanocomposite, while the practical potential of the metal-organic frameworks (MOFs) as nanocontainers for lubricants has not been realized. In this work, mesoporous Cu-BTC MOFs storing oleylamine nanocomposites were explored from synthesis and microstructure to self-lubricating characterization. The stress stimuli-responsiveness behavior of the Cu-BTC storing oleylamine (Cu-BTCO) for lubrication has been investigated by subjecting it to macroscopic ball-on-disc friction tests. The steady-state coefficients of friction (COFs) of the Cu-BTC nanocomposites without lubricants were ca. 0.5. In contrast, after oleylamine as the lubricant was incorporated into the Cu-BTC container in the nanocomposite, ultralow friction (COF, ca. 0.03) was achieved. It has been demonstrated that the improved lubricating performance was associated with the lubricating film which was in situ produced by the chemical reaction between the oleylamine released from the nanocontainer and the friction pairs. Therefore, the nanocomposite with smart Cu-BTC container holds the promise of realizing extraordinary self-lubricating properties under stress stimuli.

  9. New lubrication concepts for environmental friendly machines. Tribological, thermophysical and viscometric properties of lubricants interacting with triboactive materials

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, R.; Klingenberg, G. [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Woydt, M. [Bundesanstalt fuer Materialforschung und -pruefung (BAM), Berlin (Germany)

    2006-07-01

    The present research report was elaborated in close cooperation with Renault SAS, FUCHS Petrolub AG and Ingenieurgesellschaft Auto und Verkehr (IAV). The use of alternative oils for the lubrication of automobile engines has a potential of ecological and technical advantages. It requires the detailed knowledge of several thermophysical and viscometric properties in a large temperature range (mapping). Therefore, the following properties of up to twenty-eight different oils have been measured in the temperature range from 22 C to 150 C: density, heat capacity, thermal conductivity, viscosity at ambient pressure, viscosity under shear rates above 10{sup 6} s{sup -1}, and the viscosity at elevated pressures (maximum 100 MPa). The last two have been measured with a substantially improved and a newly developed apparatus, respectively. The pressure-viscosity coefficient has been measured on four hydrocarbon-based, factory-fill oils, a paraffin oil and twenty-three alternative oils. Nine of the alternative oils are based partly or completely on esters, the other fourteen on polyglycols, two of them additionally on water. Based on the piston ring/cylinder liner simulation tests of BAM performed outside of engines and the SRV {sup registered} tests both performed only under conditions of mixed/boundary lubrication, it is reasonable that thermally sprayed TiO{sub x}-based, Ti{sub n-2}Cr{sub 2}O{sub 2n-1} and (Ti,Mo)(C,N)+23NiMo piston ring coatings, so called 'lubricious or triboactive oxides', can substitute common materials and serve as a promising alternative to commercial piston ring coatings made of strategic Molybdenum and super-finishing intensive blends of WC/Cr{sub 3}C{sub 2}. Some couples qualified for 'zero' wear. In combination with bionotox ester- and polyglycol-based lubricants the coefficient of friction can be reduced fulfilling simultaneously stronger European exhaust emission regulations. Thermally sprayed Ti-based coatings with their

  10. Two methodologies for optical analysis of contaminated engine lubricants

    International Nuclear Information System (INIS)

    Aghayan, Hamid; Yang, Jun; Bordatchev, Evgueni

    2012-01-01

    The performance, efficiency and lifetime of modern combustion engines significantly depend on the quality of the engine lubricants. However, contaminants, such as gasoline, moisture, coolant and wear particles, reduce the life of engine mechanical components and lubricant quality. Therefore, direct and indirect measurements of engine lubricant properties, such as physical-mechanical, electro-magnetic, chemical and optical properties, are intensively utilized in engine condition monitoring systems and sensors developed within the last decade. Such sensors for the measurement of engine lubricant properties can be used to detect a functional limit of the in-use lubricant, increase drain interval and reduce the environmental impact. This paper proposes two new methodologies for the quantitative and qualitative analysis of the presence of contaminants in the engine lubricants. The methodologies are based on optical analysis of the distortion effect when an object image is obtained through a thin random optical medium (e.g. engine lubricant). The novelty of the proposed methodologies is in the introduction of an object with a known periodic shape behind a thin film of the contaminated lubricant. In this case, an acquired image represents a combined lubricant–object optical appearance, where an a priori known periodic structure of the object is distorted by a contaminated lubricant. In the object shape-based optical analysis, several parameters of an acquired optical image, such as the gray scale intensity of lubricant and object, shape width at object and lubricant levels, object relative intensity and width non-uniformity coefficient are newly proposed. Variations in the contaminant concentration and use of different contaminants lead to the changes of these parameters measured on-line. In the statistical optical analysis methodology, statistical auto- and cross-characteristics (e.g. auto- and cross-correlation functions, auto- and cross-spectrums, transfer function

  11. Role of water lubricated bearings in Candu reactors

    International Nuclear Information System (INIS)

    Kumar, Ashok N.

    1999-01-01

    During the twentieth century a great emphasis was placed in understanding and defining the operating regime of oil and grease lubricated components. Major advances have been made through elastohydrodynamic lubrication theory in the quantifying the design life of heavily loaded components such as rolling element bearings and gears. Detailed guidelines for the design of oil and grease lubricated components are widely available and are being applied to the successful design of these components. However similar guidelines for water lubricated components are either not available or not well documented. It is often forgotten that the water was used as a lubricant in several components as far back as 1884 B.C. During the twentieth century the water lubricated components continued to play a major role in some high technology industries such as in the power generation plants. In CANDU nuclear reactors water lubrication of several critical components always occupied a pride place and in most cases the only practical mode of lubrication of several critical components always occupied a pride place and in most cases the only practical mode of lubrication. This paper presents some examples of the major water lubricated components in a CANDU reactors. Major part of the paper is focused on presenting an example of successful operating history of water lubricated bearings used in the HT pumps are presented. Both types of bearings have been qualified by tests for operation under normal as well as under more severe postulated condition of loss-of-coolant-accident (LOCA). These bearings have been designed to operate for the 30 years in the existing CANDU 6 (600 MW) reactors. However for the next generation of CANDU 6 reactors which go into service in the year 2003, the HT pump bearing life has been extended to 40 years. (author)

  12. Influence of Lubricant Pocket Geometry upon Lubrication Mechanisms on Tool-Workpiece Interfaces in Metal Forming

    DEFF Research Database (Denmark)

    Shimizu, I; Martins, P.A.F.; Bay, Niels

    2004-01-01

    mechanisms, during upsetting and strip drawing, by means of a rigid viscoplastic finite element formulation. Special emphasis is placed on the effect of pocket geometry on the build up of hydrostatic pressure, which is responsible for the onset of micro lubrication mechanisms. A good agreement is found...... between the numerically predicted and the experimentally measured distributions of hydrostatic stress....

  13. The research-practice relationship in ergonomics and human factors--surveying and bridging the gap.

    Science.gov (United States)

    Chung, Amy Z Q; Shorrock, Steven T

    2011-05-01

    Significant discord has been aired regarding the widening research-practice gap in several disciplines (e.g. psychology, healthcare), especially with reference to research published in academic journals. The research-practice gap has profound and wide-ranging implications for the adequacy of ergonomics and human factors (E/HF) research and the implementation of research findings into practice. However, no substantive research on this issue has been identified in E/HF. Using an online questionnaire, practitioners were asked about their application of scientific research findings published in peer-reviewed journals and to suggest ways to improve research application in practice. A total of 587 usable responses were collected, spanning 46 countries. This article describes some of the key differences and correlations concerning reading, usefulness and barriers to application among respondents, who varied in terms of organisational type, percentage of work time devoted to application vs. research, society membership and experience. Various solutions proposed by the survey respondents on ways to bridge the research-practice gap are discussed. STATEMENT OF RELEVANCE: The relationship between research and practice in E/HF has long been a subject of discussion, with commentators pointing to tension and possible implications for the adequacy of the discipline. Findings from a cross-sectional survey provide ergonomics practitioners' views on research, leading to discussion of strategies for achieving better integration.

  14. Research culture and capacity in community health services: results of a structured survey of staff.

    Science.gov (United States)

    Friesen, Emma L; Comino, Elizabeth J

    2017-05-01

    Developing research capacity is recognised as an important endeavour. However, little is known about the current research culture, capacity and supports for staff working in community-based health settings. A structured survey of Division of Community Health staff was conducted using the research capacity tool. The survey was disseminated by email and in paper format. Quantitative data were analysed using descriptive statistics. Qualitative data were analysed thematically. In total, 109 usable responses were received, giving a response rate of 26%. Respondents were predominately nurses (n=71, 65.7%), with ~50% reporting post-graduate vocational qualifications. The highest levels of skills or organisational success were in using evidence to plan, promote and guide clinical practice. Most participants were unsure of organisational and team level skills and success at generating research. Few reported recent experience in research-generating activities. Barriers to undertaking research included lack of skills, time and access to external support and funding. Lack of skills and success in accessing external funding and resources to protect research time or to 'buy-in' technical expertise appeared to exacerbate these barriers. Community health staff have limited capacity to generate research with current levels of skill, funding and time. Strategies to increase research capacity should be informed by knowledge of clinicians' research experience and interests, and target development of skills to generate research. Resources and funding are needed at the organisational and team levels to overcome the significant barriers to research generation reported.

  15. Numerical analysis of capillary compensated micropolar fluid lubricated hole-entry journal bearings

    Directory of Open Access Journals (Sweden)

    Nathi Ram

    2016-06-01

    Full Text Available The micropolar lubricated symmetric/asymmetric hole-entry bearings using capillary restrictor have been analyzed in the present work. Reynolds equation for micropolar lubricant has been derived and solved by FEM. The results have been computed using selected parameters of micropolar lubricant for hole-entry hydrostatic/hybrid journal bearings. A significant increase in damping and stiffness coefficients is observed for bearings having micropolar parameter N2=0.9, lm=10 than similar bearings under Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant.

  16. Modified Ionic Liquid-Based High-Performance Lubricants for Robotic Operations, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA needs an advanced lubrication solution for its future robotic systems and planetary surface assets. The required lubrication technology must offer...

  17. Borax as a lubricant in powder metallurgy

    Directory of Open Access Journals (Sweden)

    Héctor Geovanny Ariza-Suarez

    2014-12-01

    were compacted at 700 MPa in a uniaxial press of 15 tons. DSC-TGA analysis of the mixture with borax was realized. The specimens were sintered in a plasma reactor at 1000 for 30 minutes, with a combined atmosphere of hydrogen and argon. Microhardness and density of the sintered samples was haracterized. XRD analysis was realized to detect possible compounds formation by interaction of borax. This paper shows that borax can be used as a lubricant in powder metallurgy.

  18. Nanotribology of Symmetric and Asymmetric Liquid Lubricants

    Directory of Open Access Journals (Sweden)

    Shinji Yamada

    2010-03-01

    Full Text Available When liquid molecules are confined in a narrow gap between smooth surfaces, their dynamic properties are completely different from those of the bulk. The molecular motions are highly restricted and the system exhibits solid-like responses when sheared slowly. This solidification behavior is very dependent on the molecular geometry (shape of liquids because the solidification is induced by the packing of molecules into ordered structures in confinement. This paper reviews the measurements of confined structures and friction of symmetric and asymmetric liquid lubricants using the surface forces apparatus. The results show subtle and complex friction mechanisms at the molecular scale.

  19. Process for the preparation of lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M

    1927-06-04

    A process is described for preparation of lubricants from mixtures of hydrocarbons or hydrocarbon derivatives of mean molecular weight and nonaromatic nature, which is characterized by halogenating the raw oil by the action of halogens or halogen-exchanging compounds and submitting the obtained product to a condensation in presence of aluminum chloride, tin chloride, iron chloride, or other condensing metal chloride or boron fluoride or activated metals, such as activated aluminum, whereby it is worked up in two steps at a temperature below 150 and preferably below 100/sup 0/C.

  20. Piston-Skirt Lubrication System For Compressor

    Science.gov (United States)

    Schroeder, Edgar C.; Burzynski, Marion, Jr.

    1994-01-01

    Piston-skirt lubrication system provides steady supply of oil to piston rings of gas compressor. No need for oil-filled crankcase or external oil pump. Instead, part of each piston acts as its own oil pump circulating oil from reservoir. Annular space at bottom of piston and cylinder constitutes working volume of small oil pump. Depending on application, reservoir open to atmosphere, or sealed and pressurized in bellows to prevent contact between oil and atmosphere. Filter removes particles worn away from piston rings and cylinder wall during normal operation.

  1. Hydrodynamic bearing lubricated with magnetic fluids

    International Nuclear Information System (INIS)

    Urreta, H; Leicht, Z; Sanchez, A; Agirre, A; Kuzhir, P; Magnac, G

    2009-01-01

    This paper summarizes the work carried out in the development of hydrodynamic lubricated journal bearings with magnetic fluids. Two different fluids have been analyzed, one ferrofluid from FERROTEC APG s10n and one magnetorheological fluid from LORD Corp., MRF122-2ED. Theoretical analysis has been carried out with numerical solutions of Reynolds equation, based on apparent viscosity modulation for ferrofluid and Bingham model for MR fluid. To validate this model, one test bench has been designed, manufactured and set up, where preliminary results shown in this paper demonstrate that magnetic fluids can be used to develop active journal bearings.

  2. The Precision of Effect Size Estimation From Published Psychological Research: Surveying Confidence Intervals.

    Science.gov (United States)

    Brand, Andrew; Bradley, Michael T

    2016-02-01

    Confidence interval ( CI) widths were calculated for reported Cohen's d standardized effect sizes and examined in two automated surveys of published psychological literature. The first survey reviewed 1,902 articles from Psychological Science. The second survey reviewed a total of 5,169 articles from across the following four APA journals: Journal of Abnormal Psychology, Journal of Applied Psychology, Journal of Experimental Psychology: Human Perception and Performance, and Developmental Psychology. The median CI width for d was greater than 1 in both surveys. Hence, CI widths were, as Cohen (1994) speculated, embarrassingly large. Additional exploratory analyses revealed that CI widths varied across psychological research areas and that CI widths were not discernably decreasing over time. The theoretical implications of these findings are discussed along with ways of reducing the CI widths and thus improving precision of effect size estimation.

  3. Report on preceding surveys and researches in fiscal 1999. Surveys and researches on the next generation cold emission technology; 1999 nendo jisedai cold emission gijutsu no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The cold emission (CE) technology must be developed as the base technology to realize the next generation flat panel displays, fluorescent display tubes, communication use microwave tubes, electron microscopes, electric power conversion elements, image photographing tubes, and different kinds of sensors. Therefore, this paper describes surveys and researches performed on technological problems and technological seeds in a hyperfine processing technology for cold emitters, and technologies to control, evaluate and simulate solid surface of cold emitters. Different kinds of applied devices that can be realized by using the CE technology are also surveyed and researched. Section 1 summarizes the progress in information communicating technologies and the changes in terminal utilization environment. Section 2 describes the application of a display technology for information terminals and a cold cathode. Section 3 investigates elementary technologies for developing electric field radiation display. Section 4 investigates physics and an evaluation technology for the next generation cold cathode. Section 5 describes the result of the investigations re-commissioned to Tsukuba University for measuring microscopic work function on solid surface by using the scanning probe process. Section 6 proposes a research and development project for the 'next generation CE technology'. (NEDO)

  4. 1990 National Compensation Survey of Research and Development Scientists and Engineers

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-01

    This report presents the results of the fourth in a new series of surveys of compensation and benefits for research and development (R D) scientists and engineers (S Es). The 1990 Survey represents the largest nationwide database of its kind, covering 104 establishments which provided data on almost 41,000 degreed researchers in the hard'' sciences. The fundamental nature of the survey has not changed: the focus is still on medium- and large-sized establishments which employ at least 100 degreed S Es in R D. The 1990 Survey contains data which cover about 18% of all establishments eligible to participate, encompassing approximately 18% of all eligible employees. As in the last three years, the survey sample constitutes a fairly good representation of the entire population of eligible establishments on the basis of business sector, geographic location, and size. Maturity-based analyses of salaries for some 34,000 nonsupervisory researchers are provided, as are job content-based analyses of more than 27,000 individual contributors and almost 5000 first level supervisors and division directors. Compensation policies and practices data are provided for 102 establishments, and benefits plans for 62 establishments are analyzed.

  5. Lubrication in cold rolling : Numerical simulation using multigrid techniques

    NARCIS (Netherlands)

    Lugt, Pieter Martin

    1992-01-01

    In the cold rolling process a lubricant is applied on the rolls and/or the strip mate­rial. Due to the velocities of the rolls and the strip, part of the lubricant is sheared into the contact causing, amongst others, a reduction of the friction. In this thesis a physical-mathematical model is

  6. Testing of environmentally friendly lubricants for sheet metal forming

    DEFF Research Database (Denmark)

    Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

    2005-01-01

    the authors have especially been involved in the development of a system of test methods for sheet metal forming and in testing of friction and limits of lubrication of new, environmentally friendly lubricants. An overview of the developed tests is presented together with selected results....

  7. Prediction of limits of lubrication in strip reduction testing

    DEFF Research Database (Denmark)

    Olsson, David Dam; Bay, Niels; Andreasen, Jan Lasson

    2004-01-01

    Pick-up and galling due to lubricant film breakdown is a severe limitation in cold forming of tribologically difficult metals like stainless steel and aluminium. The present paper describes a method of combined experimental and numerical analysis to quantify the limits of lubrication in a dedicated...

  8. Hydrophobins as aqueous lubricant additive for a soft sliding contact

    DEFF Research Database (Denmark)

    Lee, Seunghwan; Røn, Troels; Pakkanen, Kirsi I.

    2015-01-01

    lubrication characteristic is dominant via ‘self-healing’ mechanism. FpHYD5 revealed a better lubrication than HFBI presumably due to the presence of glycans and improved hydration of the sliding interface. Two type II hydrophobins function more favorably compared to a synthetic amphiphilic copolymer, PEO-PPO...

  9. Piston ring lubrication and hydrocarbon emissions from internal combustion engines

    Energy Technology Data Exchange (ETDEWEB)

    Froelund, K.

    1997-11-01

    Is it the intention with this project to improve the existing hydrocarbon emission model at the Institute by combining it with a model for predicting the piston ring lubrication. The piston ring lubrication model should be experimentally verified to ensure the validity of the model. The following items were the objectives of the current study: Develop a piston ring lubrication model. This implies the development of a ring-pack gas flow model; Examine the response of the piston ring lubrication model to changing engineer conditions. Especially, it would be interesting to look at the engine warm-up phase since this is the phase where the engine-out emissions are highest and where the commonly used three way catalyst is not capable of converting the engine-out emissions, thereby leading the engine-out emissions directly out in to the environment with the exhaust gases; In order to verify the piston ring lubrication model the lubricant distribution on the cylinder liner should be investigated experimentally. Here again it would be of great interesting to look at the engine warm-up phase; The piston ring lubrication model should be adjusted for application together with the new hydrocarbon emission model for SI-engines at the Institute in order to increase the accuracy of the latter; The piston ring lubrication model could be used for describing the transport of PAH`s in diesel engines. (EG)

  10. Mild wear modeling in the boundary lubrication regime

    NARCIS (Netherlands)

    Bosman, Rob

    2011-01-01

    Currently, the increasing demand for smaller and more efficient systems is increasing the stress put on interacting components. This forces components to operate in the boundary lubrication regime. In this lubrication regime, the normal load put on the components is no longer carried by the

  11. Temperature dependence on the synthesis of Jatropha bio lubricant

    International Nuclear Information System (INIS)

    Gunam Resul, M.F.M.; Tinia Idaty Mohd Ghazi; Idris, A.

    2009-01-01

    Full text: Jatropha oil has good potential as the renewable energy as well as lubricant feedstock. The synthesis of jatropha bio lubricant was performed by transesterification of jatropha methyl ester (JME) with trimethyl-ol-propane (TMP) with sodium methoxide (NaOCH 3 ) catalyst. The effects of temperature on the synthesis were studied at a range between 120 degree Celsius and 200 degree Celsius with pressure kept at 10 mbar. The conversion of JME to jatropha bio lubricant was found to be the highest (47 %) at 200 degree Celsius. However, it was suggested that the optimum temperature of the reaction is at 150 degree Celsius due to insignificant improvement in bio lubricant production. To maintain forward reaction, the excess amount of JME was maintained at 3.9:1 ratios to TMP. Kinetic study was done and compared. The synthesis was found to follow a second order reaction with overall rate constant of 1.49 x 10 -1 (% wt/ wt.min.degree Celsius) -1 . The estimated activation energy was 3.94 kJ/mol. Pour point for jatropha bio lubricant was at -3 degree Celsius and Viscosity Index (VI) ranged from 178 to 183. The basic properties of jatropha bio lubricant, pour point and viscosities are found comparable to other plant based bio lubricant, namely palm oil and soybean based bio lubricant. (author)

  12. Adaptive system of supplying lubricant to the internal combustion engine

    Science.gov (United States)

    Barylnikova, E. P.; Kulakov, A. T.; Kulakov, O. A.

    2017-09-01

    This paper assesses the impact of reducing the pressure in the lubrication system on the failures of the crankshaft bearings. The method of adapting lubricating system of the diesel engine as the wear in operation and depending on the operation modes.

  13. Lubricant reflow after laser heating in heat assisted magnetic recording

    Science.gov (United States)

    Wu, Haoyu; Mendez, Alejandro Rodriguez; Xiong, Shaomin; Bogy, David B.

    2015-05-01

    In heat assisted magnetic recording (HAMR) technology for hard disk drives, the media will be heated to about 500 °C during the writing process in order to reduce its magnetic coercivity and thus allow data writing with the magnetic head transducers. The traditional lubricants such as Z-dol and Z-tetraol may not be able to perform in such harsh heating conditions due to evaporation, decomposition and thermal depletion. However, some of the lubricant depletion can be recovered due to reflow after a period of time, which can help to reduce the chance of head disk interface failure. In this study, experiments of lubricant thermal depletion and reflow were performed using a HAMR test stage for a Z-tetraol type lubricant. Various lubricant depletion profiles were generated using different laser heating conditions. The lubricant reflow process after thermal depletion was monitored by use of an optical surface analyzer. In addition, a continuum based lubrication model was developed to simulate the lubricant reflow process. Reasonably good agreement between simulations and experiments was achieved.

  14. Descriptive survey of the contextual support for nursing research in 15 countries.

    Science.gov (United States)

    Uys, Leana R; Newhouse, Robin P; Oweis, Arwa; Liang, Xiaokun

    2013-01-01

    Global research productivity depends on the presence of contextual factors, such as a doctorally prepared faculty, graduate programmes, publication options, that enable the conduct and publication of studies to generate knowledge to inform nursing practice. The current study aimed to develop and test an instrument that measures the level of contextual support for nursing research within a specific country, allowing comparisons between countries. After development of a 20-item survey with seven factors and 11 criteria based on a literature review, a quantitative descriptive e-mail survey design was used. Nurse researchers (N=100) from 22 countries were invited to participate. The response rate was 39% from 15 countries. Ethics approval was obtained by investigators in their country of origin. Results showed wide variation in the level of contextual support. The average total level of support across all countries was 26.8% (standard deviation [SD]=14.97). The greatest variability was in the area of availability of publishing opportunities (ranging between no suitable journals in a country to over 100). The least variability was in the area of availability of local enabling support (SD=7.22). This research showed wide differences in the level of contextual support for nursing research. The survey instrument can be utilised as a country assessment that can be used to strategically plan the building of infrastructure needed to support nursing research. Contextual support for nursing research is an antecedent of strong science. Building infrastructure for nursing science is a priority for global health.

  15. Knowledge, attitudes, practices, and barriers related to research utilization: a survey among pharmacists in Malaysia.

    Science.gov (United States)

    Tan, Sin Yee; Hatah, Ernieda

    2017-04-01

    Background Research utilization is part of evidence-based practice referring to the process of reviewing and critiquing scientific research and applying the findings to one's own clinical practice. Many studies on research utilization have been conducted with doctors and nurses, but to our knowledge, none have been investigated amongst pharmacists. Objective To assess research utilization and its barriers among pharmacists and identify potential influencing factors. Setting Malaysia. Methods This cross-sectional survey was administered online and by mail to a convenient sample of pharmacists working in hospitals, health clinics, and retail pharmacies in rural and urban areas. Main outcome measure Pharmacists' research utilization knowledge, attitudes, and practices. Results Six hundred surveys were mailed to potential respondents, and 466 were returned (77.7% response rate). Twenty-eight respondents completed the survey online. The respondents' research utilization knowledge, attitudes, and practices were found to be moderate. Research utilization was associated with respondents' knowledge and attitude scores (P < 0.001). When factors related to research utilization were modelled, higher educational level was associated with higher level of research utilization (P < 0.001) while less involvement in journal clubs, more years of service (3-7 years and more than 7 years) were associated with low and moderate research utilization, respectively. The main reported barrier to research utilization was lack of sufficient authority to change patient care procedures. Conclusion Pharmacists' research utilization knowledge, attitudes, and practices can be improved by encouraging pharmacists to pursue higher degrees, promoting active participation in institutions' journal clubs, and introducing senior clinical pharmacist specialization.

  16. ATIS Market Research: A Survey of Operational Tests and University and Government Research

    Science.gov (United States)

    1994-03-01

    This report outlines research that examines the market for Advanced Traveler Information Systems (ATIS). The report includes detailed descriptions of Pathfinder, TravTek, and SmarTraveler ATIS operational tests. It includes basic background informati...

  17. Results of Survey Regarding Prevalence of Adventitial Infections in Mice and Rats at Biomedical Research Facilities.

    Science.gov (United States)

    Marx, James O; Gaertner, Diane J; Smith, Abigail L

    2017-09-01

    Control of rodent adventitial infections in biomedical research facilities is of extreme importance in assuring both animal welfare and high-quality research results. Sixty-three U.S. institutions participated in a survey reporting the methods used to detect and control these infections and the prevalence of outbreaks from 1 January 2014 through 31 December 2015. These results were then compared with the results of 2 similar surveys published in 1998 and 2008. The results of the current survey demonstrated that the rate of viral outbreaks in mouse colonies was decreasing, particularly in barrier facilities, whereas the prevalence of parasitic outbreaks has remained constant. These results will help our profession focus its efforts in the control of adventitial rodent disease outbreaks to the areas of the greatest needs.

  18. a Survey on Topics, Researchers and Cultures in the Field of Digital Heritage

    Science.gov (United States)

    Münster, S.

    2017-08-01

    Digital heritage comprises a broad variety of approaches and topics and involves researchers from multiple disciplines. While the use of digital methods in the text-oriented disciplines dealing with cultural heritage is widely discussed and canonized, an up-to-date investigation on cultural heritage as a scholarly field is currently missing. The extended abstract is about a three-stage investigation on standards, publications, disciplinary cultures as well as scholars in the field of digital heritage, carried out in 2016 and 2017. It includes results of a workshop-based survey involving 44 researchers, 15 qualitative interviews as well as an online survey with nearly 1000 participants. As an overall finding, a community is driven by researchers from European countries and especially Italy with a background in humanities, dealing with topics of data acquisition, data management and visualization. Moreover, conference series are most relevant for a scientific discourse, and especially EU projects set pace as most important research endeavours.

  19. A survey of the SWISS researchers on the impact of sibling privacy protections on pedigree recruitment.

    Science.gov (United States)

    Worrall, Bradford B; Chen, Donna T; Brown, Robert D; Brott, Thomas G; Meschia, James F

    2005-01-01

    To understand the perceptions and attitudes about privacy safeguards in research and investigate the impact of letter-based proband-initiated contact on recruitment, we surveyed researchers in the Siblings With Ischemic Stroke Study (SWISS). All 49 actively recruiting sites provided at least 1 response, and 61% reported that potential probands were enthusiastic. Although 66% of researchers valued proband-initiated contact, only 23% said that probands viewed this strategy as important to protecting the privacy of siblings. A substantial minority of researchers (37%) said the strategy impeded enrollment, and 44% said it was overly burdensome to probands.

  20. Application of a Biodegradable Lubricant in a Diesel Vehicle

    DEFF Research Database (Denmark)

    Schramm, Jesper

    2003-01-01

    The IEA Advanced Motor Fuels Agreement has initiated this project concerning the application of biodegradable lubricants to diesel and gasoline type vehicles. Emission measurements on a chassis dynamometer were carried out. The purpose of these measurements was to compare the emissions of CO, CO2......, NOx, THC, PM, lubricant-SOF and PAH from one diesel and one gasoline type vehicle using biodegradable lubricants and conventional lubricants. This paper describes the results of the experiments with the diesel type vehicle only. Lubricant consumption and fuel consumption are other important parameters...... that have been evaluated during the experiments. Both vehicle types were operated on conventional crude oil based fuels and alternative fuels. The diesel vehicle was operated on conventional diesel fuel from a Danish fuel station, low sulfur diesel from Sweden and biodiesel, which was bought at a fuel...

  1. Compressibilities and viscosities of reference, vegetable, and synthetic gear lubricants

    DEFF Research Database (Denmark)

    Regueira Muñiz, Teresa; Lugo, Luis; Fernández, Josefa

    2014-01-01

    Nowadays, one of the primary choices of base oils for environmentally aware lubricants is vegetable oils. This is due to their good natural biodegradability and very low toxicity in combination with very good lubricity characteristics. The development of new vegetable-based lubricants requires...... values of six gear lubricants, two of them reference mineral oils and the other four developed biodegradable oils based in high oleic sunflower oil or in synthetic esters. It was found that all of the lubricants have both similar compressibilities and similar expansivities. Dowson and Higginson, Zhu.......06%. Dowson and Higginson and Zhu and Wen equations of state do not predict well the isothermal compressibilities, with AAD % being around 45% for both equations. Moreover, the viscosities were measured in the temperature range from 278.15 to 373.15 K at atmospheric pressure for these oils, and the viscosity...

  2. Biodiesel as a lubricity additive for ultra low sulfur diesel

    Directory of Open Access Journals (Sweden)

    Subongkoj Topaiboul1 and 2,*

    2010-05-01

    Full Text Available With the worldwide trend to reduce emission from diesel engines, ultra low sulfur diesel has been introduced with thesulfur concentration of less than 10 ppm. Unfortunately, the desulfurization process inevitably reduces the lubricity of dieselfuel significantly. Alternatively, biodiesel, with almost zero sulfur content, has been added to enhance lubricity in an ultralow sulfur diesel. This work has evaluated the effectiveness of the biodiesel amount, sourced from palm and jatropha oil,and origin in ultra low sulfur diesel locally available in the market. Wear scar from a high-frequency reciprocating rig isbenchmarked to the standard value (460 m of diesel fuel lubricity. It was found that very small amount (less than 1% ofbiodiesel from either source significantly improves the lubricity in ultra low sulfur diesel, and the biodiesel from jatropha oilis a superior lubricity enhancer.

  3. Fluidized bed combustion research and development in Sweden: A historical survey

    Directory of Open Access Journals (Sweden)

    Leckner Bo.

    2003-01-01

    Full Text Available A survey is made on research and development related to fluidized bed boilers in Sweden during the past two decades, where several Swedish enterprises took part: Generator, Götaverken, Stal Laval (ABB Carbon and Studsvik. Chalmers University of Technology contributed in the field of research related to emissions, heat transfer and fluid dynamics, and some results from this activity are briefly summarized.

  4. The EpiCom Survey-Registries Across Europe, Epidemiological Research and Beyond

    DEFF Research Database (Denmark)

    Gordon, Hannah; Langholz, Ebbe

    2017-01-01

    The 2015 EpiCom survey evaluated population, patient, and research registries across Europe. Information was collected from 38 countries. The registries included those falling within the remit of national statistics, hospital databases, twin and multiplex registries, inflammatory bowel disease [IBD...

  5. Support Services for Higher Degree Research Students: A Survey of Three Australian Universities

    Science.gov (United States)

    Silva, Pujitha; Woodman, Karen; Taji, Acram; Travelyan, James; Samani, Shamim; Sharda, Hema; Narayanaswamy, Ramesh; Lucey, Anthony; Sahama, Tony; Yarlagadda, Prasad K. D. V.

    2016-01-01

    A survey was conducted across three Australian universities to identify the types and format of support services available for higher degree research (HDR, or MA and Ph.D.) students. The services were classified with regards to availability, location and accessibility. A comparative tool was developed to help institutions categorise their services…

  6. A critical review of survey-based research in supply chain integration

    NARCIS (Netherlands)

    van der Vaart, Taco; van Donk, Dirk Pieter

    Supply chain (SC) integration is considered one of the major factors in improving performance. Based upon some concerns regarding the constructs, measurements and items used, this paper analyses survey-based research with respect to the relationship between SC integration and performance. The review

  7. Does ICT influence supply chain management and performance? A review of survey-based research

    NARCIS (Netherlands)

    Zhang, Xuan; van Donk, Dirk Pieter; van der Vaart, Taco

    2011-01-01

    Purpose - The purpose of this paper is to review and classify survey-based research connecting information and communication technology (ICT), supply chain management (SCM), and supply chain (SC) performance. The review evaluates present empirical results and aims at detecting explanations for

  8. Preliminary Country Reports on Feasibility Survey: Policy Research and Education Institutions for Developing Countries.

    Science.gov (United States)

    Mitchell, James M.; Luikart, F. W.

    The feasibility of creating independent research and education centers that deal with public policy issues in developing countries is assessed. Countries that were surveyed include Brazil, Colombia, Bolivia, Costa Rica, Guatemala, South Korea, Philippines, Pakistan, and Nepal. For each country, a report describes the social and political climate…

  9. Teaching Historical Skills through JSTOR: An Online Research Project for Survey Courses

    Science.gov (United States)

    Ruswick, Brent J.

    2011-01-01

    As a new Ph.D. preparing for his first university appointment in June 2006, the author began constructing World History I and II surveys for which his graduate training left him feeling underprepared. Among the myriad challenges, he sought to create a research assignment for general education students that would address a diverse range of…

  10. What is the Process Approvals for Survey Research in the Department of Defense (DoD)

    Science.gov (United States)

    2017-04-26

    persons as individuals / representatives of agencies that elicit attitudes, opinions, behavior , and related demographic, social, and economic data to...processes are reported to be confusing. The survey approval process between services is inconsistent and time consuming . Barriers, real or perceived...The working group formed as part of the Behavioral Health Research Interest Group

  11. A Mixed Methods Survey Research Study of Novice Special Education Teachers: Investigation of Reading Preparedness

    Science.gov (United States)

    Stratton, Mary P.

    2017-01-01

    Novice special education teachers have become an integral part of the public and private school systems throughout Pennsylvania. This mixed-methods research study explored the expertise and preparedness of current novice special education teachers. A combination of an electronic survey questionnaire and phone and face-to-face interviews were…

  12. Survey on astrobiology research and teaching activities within the United kingdom.

    Science.gov (United States)

    Dartnell, Lewis R; Burchell, Mark J

    2009-10-01

    While astrobiology is apparently growing steadily around the world, in terms of the number of researchers drawn into this interdisciplinary area and teaching courses provided for new students, there have been very few studies conducted to chart this expansion quantitatively. To address this deficiency, the Astrobiology Society of Britain (ASB) conducted a questionnaire survey of universities and research institutions nationwide to ascertain the current extent of astrobiology research and teaching in the UK. The aim was to provide compiled statistics and an information resource for those who seek research groups or courses of study, and to facilitate new interdisciplinary collaborations. The report here summarizes details gathered on 33 UK research groups, which involved 286 researchers (from undergraduate project students to faculty members). The survey indicates that around 880 students are taking university-level courses, with significant elements of astrobiology included, every year in the UK. Data are also presented on the composition of astrobiology students by their original academic field, which show a significant dominance of physics and astronomy students. This survey represents the first published systematic national assessment of astrobiological academic activity and indicates that this emerging field has already achieved a strong degree of penetration into the UK academic community.

  13. Tribological properties and lubrication mechanism of in situ graphene-nickel matrix composite impregnated with lubricating oil

    Science.gov (United States)

    Lei, Yu; Du, Jinfang; Pang, Xianjuan; Wang, Haizhong; Yang, Hua; Jiang, Jinlong

    2018-05-01

    A solid-liquid synergetic lubricating system has been designed to develop a novel self-lubricating nickel matrix composite. The graphene-nickel (G-Ni) matrix composite with porous structure was fabricated by in situ growing graphene in bulk nickel using a powder metallurgy method. The porous structures of the composite were used to store polyalphaolefin (PAO) oil for self-lubricating. It is found that the G-Ni matrix composite under oil lubrication condition exhibited superior tribological properties as compared to pure nickel and the composite under dry sliding condition. The prestored oil was released from pores to the sliding surface forming a lubricating oil film during friction process. This lubricating oil film can protect the worn surface from severe oxidation, and help the formation and transfer of a carbon-based solid tribofilm derived from graphene and lubricating oil. This solid (graphene)-liquid (oil) synergistic lubricating mechanism is responsible for the reduction of friction coefficient and improvement of wear resistance of the in situ fabricated G-Ni matrix composite.

  14. Ethical Gifts?: An Analysis of Soap-for-data Transactions in Malawian Survey Research Worlds.

    Science.gov (United States)

    Biruk, Crystal

    2017-09-01

    In 2008, thousands of Malawians received soap from an American research project as a gift for survey participation. Soap was deemed an ethical, non-coercive gift by researchers and ethics boards, but took on meanings that expressed recipients' grievances and aspirations. Research participants reframed soap and research benefits as "rights" they are entitled to, wages for "work," and a symbol of exploitation. Enlisting the perspectives of Malawi's ethics board, demographers, Malawian fieldworkers, and research participants, I describe how soap is spoken about and operates in research worlds. I suggest that neither a prescriptive nor a situated frame for ethics-with their investments in standardization and attention to context, respectively-provides answers about how to compensate Malawian research participants. The conclusion gestures toward a reparative framework for thinking ethics that is responsive not just to project-based parameters but also to the histories and political economy in which projects (and ethics) are situated. © 2017 by the American Anthropological Association.

  15. A Survey of Knowledge Management Research & Development at NASA Ames Research Center

    Science.gov (United States)

    Keller, Richard M.; Clancy, Daniel (Technical Monitor)

    2002-01-01

    This chapter catalogs knowledge management research and development activities at NASA Ames Research Center as of April 2002. A general categorization scheme for knowledge management systems is first introduced. This categorization scheme divides knowledge management capabilities into five broad categories: knowledge capture, knowledge preservation, knowledge augmentation, knowledge dissemination, and knowledge infrastructure. Each of nearly 30 knowledge management systems developed at Ames is then classified according to this system. Finally, a capsule description of each system is presented along with information on deployment status, funding sources, contact information, and both published and internet-based references.

  16. Public priorities for osteoporosis and fracture research: results from a general population survey.

    Science.gov (United States)

    Paskins, Zoe; Jinks, Clare; Mahmood, Waheed; Jayakumar, Prakash; Sangan, Caroline B; Belcher, John; Gwilym, Stephen

    2017-12-01

    This is the first national study of public and patient research priorities in osteoporosis and fracture. We have identified new research areas of importance to members of the public, particularly 'access to information from health professionals'. The findings are being incorporated into the research strategy of the National Osteoporosis Society. This study aimed to prioritise, with patients and public members, research topics for the osteoporosis research agenda. An e-survey to identify topics for research was co-designed with patient representatives. A link to the e-survey was disseminated to supporters of the UK National Osteoporosis Society (NOS) in a monthly e-newsletter. Responders were asked to indicate their top priority for research across four topics (understanding and preventing osteoporosis, living with osteoporosis, treating osteoporosis and treating fractures) and their top three items within each topic. Descriptive statistics were used to describe demographics and item ranking. A latent class analysis was applied to identify a substantive number of clusters with different combinations of binary responses. One thousand one hundred eighty-eight (7.4%) respondents completed the e-survey. The top three items overall were 'Having easy access to advice and information from health professionals' (63.8%), 'Understanding further the safety and benefit of osteoporosis drug treatments' (49.9%) and 'Identifying the condition early by screening' (49.2%). Latent class analysis revealed distinct clusters of responses within each topic including primary care management and self-management. Those without a history of prior fracture or aged under 70 were more likely to rate items within the cluster of self-management as important (21.0 vs 12.9 and 19.8 vs 13.3%, respectively). This is the first study of public research priorities in osteoporosis and has identified new research areas of importance to members of the public including access to information. The findings

  17. Music therapists' research activity and utilization barriers: a survey of the membership.

    Science.gov (United States)

    Waldon, Eric G

    2015-01-01

    Music therapists have access to a rapidly expanding body of research supporting the use of music-based interventions. What is not known is the extent to which music therapists access these resources and what factors may prevent them from incorporating research findings into clinical work. After constructing the Music Therapists' Research Activity and Utilization Barrier (MTRAUB) database, the purposes of this study involved: assessing the extent to which American Music Therapy Association (AMTA) members engage in certain research-related activities; and identifying respondents' perceived barriers to integrating research into clinical practice. This study employed a quantitative, non-experimental approach using an online survey. Respondents included professional, associate, student/graduate student, retired, inactive, and honorary life members of AMTA. Instrumentation involved a researcher-designed Background Questionnaire as well as the Barriers to Research Utilization Scale (BARRIERS; Funk, Champagne, Wiese, & Tornquist, 1991), a tool designed to assess perceived barriers to incorporating research into practice. Of the 3,194 survey invitations distributed, 974 AMTA members replied (a response rate of 30%). Regarding research-related activities, descriptive findings indicate that journal reading is the most frequently reported research-related activity while conducting research is the least frequently reported activity. Results from the BARRIERS Scale indicated that Organizational and Communication factors are perceived as interfering most prominently with the ability to utilize research in clinical practice. Findings suggest that research-related activity and perceived barriers vary as a function of educational attainment, work setting, and occupational role. The author discusses these differential findings in detail, suggests supportive mechanisms to encourage increased research activity and utilization, and offers recommendations for further analysis of the

  18. Extent, Awareness and Perception of Dissemination Bias in Qualitative Research: An Explorative Survey.

    Science.gov (United States)

    Toews, Ingrid; Glenton, Claire; Lewin, Simon; Berg, Rigmor C; Noyes, Jane; Booth, Andrew; Marusic, Ana; Malicki, Mario; Munthe-Kaas, Heather M; Meerpohl, Joerg J

    2016-01-01

    Qualitative research findings are increasingly used to inform decision-making. Research has indicated that not all quantitative research on the effects of interventions is disseminated or published. The extent to which qualitative researchers also systematically underreport or fail to publish certain types of research findings, and the impact this may have, has received little attention. A survey was delivered online to gather data regarding non-dissemination and dissemination bias in qualitative research. We invited relevant stakeholders through our professional networks, authors of qualitative research identified through a systematic literature search, and further via snowball sampling. 1032 people took part in the survey of whom 859 participants identified as researchers, 133 as editors and 682 as peer reviewers. 68.1% of the researchers said that they had conducted at least one qualitative study that they had not published in a peer-reviewed journal. The main reasons for non-dissemination were that a publication was still intended (35.7%), resource constraints (35.4%), and that the authors gave up after the paper was rejected by one or more journals (32.5%). A majority of the editors and peer reviewers "(strongly) agreed" that the main reasons for rejecting a manuscript of a qualitative study were inadequate study quality (59.5%; 68.5%) and inadequate reporting quality (59.1%; 57.5%). Of 800 respondents, 83.1% "(strongly) agreed" that non-dissemination and possible resulting dissemination bias might undermine the willingness of funders to support qualitative research. 72.6% and 71.2%, respectively, "(strongly) agreed" that non-dissemination might lead to inappropriate health policy and health care. The proportion of non-dissemination in qualitative research is substantial. Researchers, editors and peer reviewers play an important role in this. Non-dissemination and resulting dissemination bias may impact on health care research, practice and policy. More

  19. Experimental Investigations of Biological Lubrication at the Nanoscale: The Cases of Synovial Joints and the Oral Cavity

    Directory of Open Access Journals (Sweden)

    Javier Sotres

    2013-11-01

    Full Text Available Interactions between surfaces are ubiquitous phenomena in living organisms. Nature has developed sophisticated strategies for lubricating these systems, increasing their efficiency and life span. This includes the use of water-based lubricants, such as saliva and synovial fluid. These fluids overcome the limitations of water as a lubricant by the presence of molecules such as proteins, lipids, and polysaccharides. Such molecules may alter surface interactions through different mechanisms. They can increase viscosity enabling fluid-film lubrication. Moreover, molecules adsorb on the surfaces providing mechanisms for boundary lubrication and preventing wear. The mentioned molecules have typical sizes in the nanometer range. Their interaction, as well as the interaction with the entrapping surfaces, takes place through forces in the range of nanonewtons. It is therefore not surprising that the investigation of these systems have been boosted by development of techniques such as scanning probe microscopies and the surface force apparatus which allow studying tribological processes at the nanoscale. Indeed, these approaches have generated an enormous amount of studies over the last years. The aim of this review is to perform a critical analysis of the current stage of this research, with a main focus on studies on synovial joints and the oral cavity.

  20. Atomistic study of ternary oxides as high-temperature solid lubricants

    Science.gov (United States)

    Gao, Hongyu

    understanding of lubricious mechanisms of solid lubricants in general. Molecular dynamics (MD) simulations was used as the primary tool in this research, complemented by density-functional theory and experiments from our colleagues. In this research, we first developed empirical potential parameters for AgTaO3 and later Cu- Ta-O ternaries using the modified embedded-atom method (MEAM) formalism. With those parameters, we explored the sliding mechanisms of AgTaO3, CuTaO3 and CuTa2O6 at elevated temperatures. Particularly on AgTaO3, we investigated the effects of applied loads as well as surface terminations on friction and wear as functions of temperature. In addition, to optimize the tribological performance of AgTaO3, film reconstruction mechanisms were investigated on Ta2O5/Ag films with varying amounts of Ag. For the potassium chloride-iron system, we studied the effect of contact pressure on interfacial structure, based on which the origin of the commonly observed pressure-dependent shear strengths was explored. We hope this research will benefit the design and development of solid lubricant materials for a wide range of applications.

  1. Study of hydrodynamic behaviour of large bearings depending on the viscosity of the lubricant

    Directory of Open Access Journals (Sweden)

    Barabas Sorin

    2017-01-01

    Full Text Available The research refers to study of hydrodynamic behavior of large bearings equipped with automatic lubrication system, where the liquid used may have a viscosity with variable values depending on the temperature or depending on the additive used. The introduction of additives with nanoparticles causes modification of viscosity and a significant reduction of friction coefficient. This study establishes a direct link between the friction, viscosity and tensions that occur in the contact area. Experimental studies confirm improving tribological properties of the contact area between the bearing rollers and raceways, through attracting nanoparticles on surfaces in contact and reducing friction coefficient. Accomplished finite element analysis showed decrease of the contact stresses, therefore decrease of the wear and increase the life of the bearing. Research has concluded that influencing viscosity and friction coefficient of lubricant can result in reducing wear of the bearing components, as well as increase the lifetime of bearing.

  2. Advances and patents about grinding equipments with nano-particle jet minimum quantity lubrication.

    Science.gov (United States)

    Jia, Dongzhou; Li, Changhe; Wang, Sheng; Zhang, Qiang; Hou, Yali

    2014-01-01

    In recent years, a large number of patents have been devoted to developing minimum quantity lubrication (MQL) grinding techniques that can significantly improve both environmentally conscious and energy saving and costeffective sustainable grinding fluid alternatives. Among them, one patent is about a controllable nano-fluids jet MQL grinding system based on electrostatic atomization. Using the principle of electrostatics, it can achieve the control of droplet transfer by charging the sprayed droplets. This system can improve the uniformity of the droplet spectrum, liquid deposition efficiency and effective utilization of liquid. It can also effectively control the movement patterns of the droplets, thereby reducing the pollution of the environment and providing better health protection for workers. Although researchers accomplished profound and systematic studies on MQL, especially on nano-particles jet MQL. It can solve the shortage of MQL in cooling performance, greatly improve the working environment, save energy and reduce costs to achieve a low-carbon manufacturing. The unique lubricating performance and tribological property of solid nano-particles form nano-particle shearing films at the grinding wheel/workpiece interface, which can enhance the lubricating performance of MQL grinding. Existing studies on MQL grinding equipments, however, cannot meet the needs of the technological development. Therefore, our research provided a general introduction of the latest patients and research progress of nanoparticles jet MQL grinding equipments presented by the research team from Qingdao Technological University.

  3. Recruiting and retaining youth and young adults: challenges and opportunities in survey research for tobacco control.

    Science.gov (United States)

    Cantrell, Jennifer; Hair, Elizabeth C; Smith, Alexandria; Bennett, Morgane; Rath, Jessica Miller; Thomas, Randall K; Fahimi, Mansour; Dennis, J Michael; Vallone, Donna

    2018-03-01

    Evaluation studies of population-based tobacco control interventions often rely on large-scale survey data from numerous respondents across many geographic areas to provide evidence of their effectiveness. Significant challenges for survey research have emerged with the evolving communications landscape, particularly for surveying hard-to-reach populations such as youth and young adults. This study combines the comprehensive coverage of an address-based sampling (ABS) frame with the timeliness of online data collection to develop a nationally representative longitudinal cohort of young people aged 15-21. We constructed an ABS frame, partially supplemented with auxiliary data, to recruit this hard-to-reach sample. Branded and tested mail-based recruitment materials were designed to bring respondents online for screening, consent and surveying. Once enrolled, respondents completed online surveys every 6 months via computer, tablet or smartphone. Numerous strategies were utilized to enhance retention and representativeness RESULTS: Results detail sample performance, representativeness and retention rates as well as device utilization trends for survey completion among youth and young adult respondents. Panel development efforts resulted in a large, nationally representative sample with high retention rates. This study is among the first to employ this hybrid ABS-to-online methodology to recruit and retain youth and young adults in a probability-based online cohort panel. The approach is particularly valuable for conducting research among younger populations as it capitalizes on their increasing access to and comfort with digital communication. We discuss challenges and opportunities of panel recruitment and retention methods in an effort to provide valuable information for tobacco control researchers seeking to obtain representative, population-based samples of youth and young adults in the U.S. as well as across the globe. © Article author(s) (or their employer

  4. Surveying managers to inform a regionally relevant invasive Phragmites australis control research program.

    Science.gov (United States)

    Rohal, C B; Kettenring, K M; Sims, K; Hazelton, E L G; Ma, Z

    2018-01-15

    Managers of invasive species consider the peer-reviewed literature only moderately helpful for guiding their management programs. Though this "knowing-doing gap" has been well-described, there have been few efforts to guide scientists in how to develop useful and usable science. Here we demonstrate how a comprehensive survey of managers (representing 42 wetland management units across the Great Salt Lake watershed) can highlight management practices and challenges (here for the widespread invasive plant, Phragmites australis, a recent and aggressive invader in this region) to ultimately inform a research program. The diversity of surveyed organizations had wide-ranging amounts of Phragmites which led to different goals and approaches including more aggressive control targets and a wider array of control tools for smaller, private organizations compared to larger government-run properties. We found that nearly all managers (97%) used herbicide as their primary Phragmites control tool, while burning (65%), livestock grazing (49%), and mowing (43%) were also frequently used. Managers expressed uncertainties regarding the timing of herbicide application and type of herbicide for effective control. Trade-offs between different Phragmites treatments were driven by budgetary concerns, as well as environmental conditions like water levels and social constraints like permitting issues. Managers had specific ideas about the plant communities they desired following Phragmites control, yet revegetation of native species was rarely attempted. The results of this survey informed the development of large-scale, multi-year Phragmites control and native plant revegetation experiments to address management uncertainties regarding herbicide type and timing. The survey also facilitated initial scientist-manager communication, which led to collaborations and knowledge co-production between managers and researchers. An important outcome of the survey was that experimental results were

  5. Ball Bearings Equipped for In Situ Lubrication on Demand

    Science.gov (United States)

    Marchetti, Mario; Jones, William R., Jr.; Pepper, Stephen V.; Jansen, Mark; Predmore, Roamer

    2005-01-01

    In situ systems that provide fresh lubricants to ball/race contacts on demand have been developed to prolong the operational lives of ball bearings. These systems were originally intended to be incorporated into ball bearings in mechanisms that are required to operate in outer space for years, in conditions in which lubricants tend to deteriorate and/or evaporate. These systems may also be useful for similarly prolonging bearing lifetimes on Earth. Reservoirs have been among the means used previously to resupply lubricants. Lubricant- resupply reservoirs are bulky and add complexity to bearing assemblies. In addition, such a reservoir cannot be turned on or off as needed: it supplies lubricant continuously, often leading to an excess of lubricant in the bearing. A lubricator of the present type includes a porous ring cartridge attached to the inner or the outer ring of a ball bearing (see Figure 1). Oil is stored in the porous cartridge and is released by heating the cartridge: Because the thermal expansion of the oil exceeds that of the cartridge, heating causes the ejection of some oil. A metal film can be deposited on a face of the cartridge to serve as an electrical-resistance heater. The heater can be activated in response to a measured increase in torque that signals depletion of oil from the bearing/race contacts. Because the oil has low surface tension and readily wets the bearing-ring material, it spreads over the bearing ring and eventually reaches the ball/race contacts. The Marangoni effect (a surface-tension gradient associated with a temperature gradient) is utilized to enhance the desired transfer of lubricant to the ball/race contacts during heating. For a test, a ball bearing designed for use at low speed was assembled without lubricant and equipped with a porous-ring lubricator, the resistance heater of which consumed a power of less than 1 W when triggered on by a torque-measuring device. In the test, a load of 20 lb (.89 N) was applied and the

  6. Multi-scale analysis of the roughness effect on lubricated rough contact

    OpenAIRE

    DEMIRCI, Ibrahim

    2014-01-01

    Determining friction is as equally essential as determining the film thickness in the lubricated contact, and is an important research subject. Indeed, reduction of friction in the automotive industry is important for both the minimization of fuel consumption as well as the decrease in the emissions of greenhouse gases. However, the progress in friction reduction has been limited by the difficulty in understanding the mechanism of roughness effects on friction. It was observed that micro-surf...

  7. Empirical Investigation of Electricity Self-Generation in a Lubricated Sliding–Rolling Contact

    Energy Technology Data Exchange (ETDEWEB)

    Ščepanskis, Mihails; Gould, Benjamin; Greco, Aaron

    2017-07-20

    The paper reports the empirical observations of voltage generation in a lubricated tribocontact with different oils altering load, sliding and temperature. The investigation is done in the context of research of the root cause of white etching cracks (WEC) failure in bearings. Tested oils of different additive packages found completely different electrical behavior. The oil, which is known to produce WECs in laboratory tests, demonstrated non-zero voltage generation

  8. Recycling of Automotive Lubricating Waste Oil and Its Quality Assessment for Environment-Friendly Use

    OpenAIRE

    Naveed Anwar; Syed Shahid Ali; Zubair Anwar; Jabar Zaman Khan Khattak; Abdul Jabbar; Tariq M. Ansari; Syed Sibtain Raza Naqvi

    2012-01-01

    Lubricating oils, which are formulated with a number of chemicals blended base oils provide products that last longer, keep machinery cleaner and allow the machinery to work better under severe operating conditions. However, the used oil-waste generated by the automobiles and other allied industries poses an environmental hazard. The motivation of the present research study was to study the merits and demerits of commonly applicable technique acid/clay for reclamation of waste oil. This proce...

  9. The influence of the vane on the lubrication characteristics between the vane and the rolling piston of a rotary compressor

    International Nuclear Information System (INIS)

    Cho, Ihn Sung; Jung, Jae Youn

    2006-01-01

    The rolling piston type rotary compressor has been widely used for refrigeration and air -conditioning systems due to its compactness and high-speed operation. The present analysis is part of a research program directed toward maximizing the advantages of refrigerant compressors. The study of lubrication characteristics in the critical sliding component is essential for the design of refrigerant compressors. Therefore, theoretical investigation of the lubrication characteristics of a rotary compressor being used for refrigeration and air-conditioning systems was investigated. The Newton-Raphson method was used for a partial elastohydrodynamic lubrication analysis between the vane and the rolling piston of a rotary compressor. The results demonstrated that the vane thickness and the center line position of the vane significantly influenced the friction force and the energy loss between the vane and the rolling piston

  10. Coated carbide drill performance under soluble coconut oil lubricant and nanoparticle enhanced MQL in drilling AISI P20

    Science.gov (United States)

    Jamil, N. A. M.; Azmi, A. I.; Fairuz, M. A.

    2016-02-01

    This research experimentally investigates the performance of a TiAlN coated carbide drill bit in drilling AISI P20 through two different kinds of lubricants, namely; soluble coconut oil (SCO) and nanoparticle-enhanced coconut oil (NECO) under minimum quantity lubrication system. The tool life and tool wear mechanism were studied using various cutting speeds of 50, 100 and 150 m/min with a constant feed of 0.01 mm/rev. Since the flank wear land was not regular along the cutting edge, the average flank wear (VB) was measured at several points using image analysis software. The drills were inspected using a scanning electron microscope to further elucidate the wear mechanism. The result indicates that drilling with the nanoparticle- enhanced lubricant was better in resisting the wear and improving the drill life to some extent

  11. Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

    Directory of Open Access Journals (Sweden)

    Djordje Cica

    2013-01-01

    Full Text Available Cutting forces are one of the inherent phenomena and a very significant indicator of the metal cutting process. The work presented in this paper is an investigation of the prediction of these parameters in turning using soft computing techniques. During the experimental research focus is placed on the application of various methods of cooling and lubricating of the cutting zone. On this occasion were used the conventional method of cooling and lubricating, high pressure jet assisted machining, and minimal quantity lubrication technique. The data obtained by experiment are used to create two different models, namely, artificial neural network and adaptive networks based fuzzy inference systems for prediction of cutting forces. Furthermore, both models are compared with the experimental data and results are indicated.

  12. Origins of extreme boundary lubrication by phosphatidylcholine liposomes.

    Science.gov (United States)

    Sorkin, Raya; Kampf, Nir; Dror, Yael; Shimoni, Eyal; Klein, Jacob

    2013-07-01

    Phosphatidylcholine (PC) vesicles have been shown to have remarkable boundary lubricating properties under physiologically-high pressures. Here we carry out a systematic study, using a surface force balance, of the normal and shear (frictional) forces between two opposing surfaces bearing different PC vesicles across water, to elucidate the origin of these properties. Small unilamellar vesicles (SUVs, diameters < 100 nm) of the symmetric saturated diacyl PCs DMPC (C(14)), DPPC (C(16)) and DSPC (C(18)) attached to mica surfaces were studied in their solid-ordered (SO) phase on the surface. Overall liposome lubrication ability improves markedly with increasing acyl chain length, and correlates strongly with the liposomes' structural integrity on the substrate surface: DSPC-SUVs were stable on the surface, and provided extremely efficient lubrication (friction coefficient μ ≈ 10(-4)) at room temperature at pressures up to at least 18 MPa. DMPC-SUVs ruptured following adsorption, providing poor high-pressure lubrication, while DPPC-SUVs behavior was intermediate between the two. These results can be well understood in terms of the hydration-lubrication paradigm, but suggest that an earlier conjecture, that highly-efficient lubrication by PC-SUVs depended simply on their being in the SO rather than in the liquid-disordered phase, should be more nuanced. Our results indicate that the resistance of the SUVs to mechanical deformation and rupture is the dominant factor in determining their overall boundary lubrication efficiency in our system. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Managing Astronomy Research Data: Data Practices in the Sloan Digital Sky Survey and Large Synoptic Survey Telescope Projects

    Science.gov (United States)

    Sands, Ashley Elizabeth

    2017-01-01

    Ground-based astronomy sky surveys are massive, decades-long investments in scientific data collection. Stakeholders expect these datasets to retain scientific value well beyond the lifetime of the sky survey. However, the necessary investments in knowledge infrastructures for managing sky survey data are not yet in place to ensure the long-term…

  14. New journal selection for quantitative survey of infectious disease research: application for Asian trend analysis

    Directory of Open Access Journals (Sweden)

    Okabe Nobuhiko

    2009-10-01

    Full Text Available Abstract Background Quantitative survey of research articles, as an application of bibliometrics, is an effective tool for grasping overall trends in various medical research fields. This type of survey has been also applied to infectious disease research; however, previous studies were insufficient as they underestimated articles published in non-English or regional journals. Methods Using a combination of Scopus™ and PubMed, the databases of scientific literature, and English and non-English keywords directly linked to infectious disease control, we identified international and regional infectious disease journals. In order to ascertain whether the newly selected journals were appropriate to survey a wide range of research articles, we compared the number of original articles and reviews registered in the selected journals to those in the 'Infectious Disease Category' of the Science Citation Index Expanded™ (SCI Infectious Disease Category during 1998-2006. Subsequently, we applied the newly selected journals to survey the number of original articles and reviews originating from 11 Asian countries during the same period. Results One hundred journals, written in English or 7 non-English languages, were newly selected as infectious disease journals. The journals published 14,156 original articles and reviews of Asian origin and 118,158 throughout the world, more than those registered in the SCI Infectious Disease Category (4,621 of Asian origin and 66,518 of the world in the category. In Asian trend analysis of the 100 journals, Japan had the highest percentage of original articles and reviews in the area, and no noticeable increase in articles was revealed during the study period. China, India and Taiwan had relatively large numbers and a high increase rate of original articles among Asian countries. When adjusting the publication of original articles according to the country population and the gross domestic product (GDP, Singapore and

  15. Diesel fuel lubricity testing revisited : Tests von Dieselkraftstoffschmierfähigkeit erneut betrachtet

    NARCIS (Netherlands)

    van Leeuwen, H.J.

    2017-01-01

    Fuel is used as a lubricant in several engine components. Diesel fuel is known for its good lubrication properties, better than gasoline. These properties are examined in standard tests, as prescribed by ASTM. Good lubrication properties are designated as a good lubricity. Most commonly, fuel

  16. Verification of radioactive contamination surveys for practical use in biological research centres

    International Nuclear Information System (INIS)

    Macias, M.T.; Requejo, C.; Ruiz, M.; Pina, R.

    2006-01-01

    Unsealed sources are commonly used in science research laboratories. Their manipulation may imply a radioactive contamination hazard. Therefore, adequate and sensitive survey meters must be available, and must have an effective and accurate response to intensity and type of radiation emitted by the used radionuclides to identify and quantify the possible contamination and then be able to avoid any associated or unwanted consequences that may arise. Periodic surveys are performed to show control, any time, any place radioactive contamination is suspected, and to ensure radioisotopes are being used safely. The immediate work areas must be often checked with portable survey monitors, including the entire lab and particularly bench tops, personnel protective equipment or solely designated equipment for isotope use (micro-fuges, water baths, incubators). These are carried out with portable survey instruments like Geiger-Muller tubes, proportional counters and scintillation detectors that provide direct or indirect measurements capabilities. The Radiation Safety Office (R.S.O.) as well as the radioactive compounds working laboratories at the Instituto de Inv. Biomedicas 'A. Sols' (Madrid-Spain) are provided with an adequate radiation measurement instrument. But, before a portable survey instrument is used, several quality checks should be made (batteries, calibration sticker), and the instrument response should be tested with a check source. This paper aims at determining, with a R.S.O. procedure, these surveys working parameters -detection efficiency, calibration factors and minimum detectable activities-, using reference checking sources ( 14 C, 36 Cl, and 90 Sr/ 90 Y) with known radioactivity covering the energy range of beta emitting isotopes used in biological research. No gamma portable monitors have been tested for the R.S.O. has no gamma checking sources. Therefore, 58 beta monitors were tested, obtaining t he efficiency values, the calibration factors (Bq cm-2 s

  17. Enhanced Biodegradability, Lubricity and Corrosiveness of Lubricating Oil by Oleic Acid Diethanolamide Phosphate

    Directory of Open Access Journals (Sweden)

    Fang Jianhua

    2012-09-01

    Full Text Available Impacts of oleic acid diethanolamide phosphate (abbreviated as ODAP as an additive on biodegradability, anti-wear capacity, friction-reducing ability and corrosiveness of an unreadily biodegradable HVI 350 mineral lubricating oil was studied. The biodegradabilities of neat lubricating oil and its formulations with ODAP were evaluated on a biodegradation tester. Furthermore, the anti-wear and friction-reducing abilities and the corrosiveness of neat oil and the formulated oils were determined on a four-ball tribotester and a copper strip corrosion tester, respectively. The results indicated that ODAP markedly enhanced biodegradability as well as anti-wear and friction-reducing abilities of the lubricating oil. On the other hand, excellent color ratings of copper strips for both neat oil and the ODAP-doped oil were obtained in the corrosion tests, demonstrating that the corrosiveness of neat oil and the doped oil was negligible, although the latter seemed to provide slightly better anti-corrosion ability.

  18. Frictional lubricity enhanced by quantum mechanics.

    Science.gov (United States)

    Zanca, Tommaso; Pellegrini, Franco; Santoro, Giuseppe E; Tosatti, Erio

    2018-04-03

    The quantum motion of nuclei, generally ignored in the physics of sliding friction, can affect in an important manner the frictional dissipation of a light particle forced to slide in an optical lattice. The density matrix-calculated evolution of the quantum version of the basic Prandtl-Tomlinson model, describing the dragging by an external force of a point particle in a periodic potential, shows that purely classical friction predictions can be very wrong. The strongest quantum effect occurs not for weak but for strong periodic potentials, where barriers are high but energy levels in each well are discrete, and resonant Rabi or Landau-Zener tunneling to states in the nearest well can preempt classical stick-slip with nonnegligible efficiency, depending on the forcing speed. The resulting permeation of otherwise unsurmountable barriers is predicted to cause quantum lubricity, a phenomenon which we expect should be observable in the recently implemented sliding cold ion experiments.

  19. Tribofilms Forming in Oil-Lubricated Contacts

    Directory of Open Access Journals (Sweden)

    Matthias Scherge

    2016-07-01

    Full Text Available The subject of the present paper is the characterization of third bodies of run-in systems. By means of continuous friction and wear measurement, lubricated steel-steel and steel-aluminum contacts were evaluated. Microstructure, chemical composition and response of the materials to shear were analyzed by XPS/AES and focused ion beam technique. After a proper running-in, both systems developed a third body. The third body differs significantly from the base materials. In addition to adapted microstructure and near-surface chemistry, the third body exhibited a substructure characterized by a near-surface zone that accommodates shear and a second, deeper region that ensures strengthening.

  20. Lubricant distribution determination by neutron radiography

    International Nuclear Information System (INIS)

    Stewart, P.A.E.

    1979-01-01

    Cold neutron radiation of energy less than 0.025 eV having a flux greater than 1 x 10 3 neutrons/square centimeter/second is used to diagnose temporal information about the spatial distribution of hydrocarbon fuel and lubrication oils in internal combustion engines, gas turbine engines and fuel systems. Images of the movement of fuel or oil are recorded by directing a beam of neutrons through an engine and using an image intensifier responsive to low light levels to intensify an image formed by neutrons which have been directed through the engine onto a fluorescent screen. The output image from the intensifier is recorded by a video or cine camera

  1. Lubrication analysis of the thrust bearing in the main coolant pump of SMART

    International Nuclear Information System (INIS)

    Lee, J. S.; Park, J. S.; Kim, J. H.; Hur, H.; Kim, J. I.

    2001-01-01

    Thrust bearing and journal bearings are installed in the main coolant pump for SMART to support the rotating shaft with proper lubrication. The canned motor type main coolant pumps are arranged vertically on the reactor vessel and especially the MCP bearings are lubricated with water without external lubricating oil supply. Because axial load capacity of the thrust bearing can hardly meet requirement to acquire hydrodynamic or fluid film lubrication state, self-lubrication characteristics of silicon graphite meterials would be needed. Lubricational analysis method for thrust bearing for the main coolant pump of SMART is proposed, and lubricational characteristics of the bearing generated by solving the Reynolds equation are examined in this paper

  2. Recent surveys and researches on pollinosis in Japan; Kafunsho ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    Shido, T. [The Inst. of Public Health, Tokyo (Japan)

    1998-05-31

    In this paper, recent investigations and researches on pollinosis are summarized as centering on the investigation entrusted by the Ministry of Health and Welfare and executed since 1992, and especially the surveys on Japanese cedar pollinosis during 1995 to 1996. The quantity of pollen surveyed in 1995 is the greatest in the survey history of nationwide flying pollen. Particularly, the quantity of cedar and hinoki pollen is 10 to 40 times as many as that in the year before. Consequently, since the sensitization and onset due to the cedar pollen increased greatly, the objects of the surveys and the researches were mainly in respect to the analysis of onset factors of pollinosis, clarification of its natural process, evaluation on the effectiveness of desensitization therapy, the clinical subjects including the confirmation of pharynx symptom and asthma symptom, and the discovery of naturally sensitizing dog. A fact that the quantity of flying pollen concerns the occurrence and degree of the clinical symptom has already been indicated by a clinical observation carried out for a long period of time. In respect to specific prophylaxis and therapy, for the first time the pollen masks and glasses sold on the market are investigated, and the necessity of the verification thereof is described. 27 refs., 7 figs., 5 tabs.

  3. Numerical simulation of lubrication mechanisms at mesoscopic scale

    DEFF Research Database (Denmark)

    Hubert, C.; Bay, Niels; Christiansen, Peter

    2011-01-01

    The mechanisms of liquid lubrication in metal forming are studied at a mesoscopic scale, adopting a 2D sequential fluid-solid weak coupling approach earlier developed in the first author's laboratory. This approach involves two computation steps. The first one is a fully coupled fluid-structure F...... of pyramidal indentations. The tests are performed with variable reduction and drawing speed under controlled front and back tension forces. Visual observations through a transparent die of the fluid entrapment and escape from the cavities using a CCD camera show the mechanisms of Micro......PlastoHydroDynamic Lubrication (MPHDL) as well as cavity shrinkage due to lubricant compression and escape and strip deformation....

  4. Numerical methods and computers used in elastohydrodynamic lubrication

    Science.gov (United States)

    Hamrock, B. J.; Tripp, J. H.

    1982-01-01

    Some of the methods of obtaining approximate numerical solutions to boundary value problems that arise in elastohydrodynamic lubrication are reviewed. The highlights of four general approaches (direct, inverse, quasi-inverse, and Newton-Raphson) are sketched. Advantages and disadvantages of these approaches are presented along with a flow chart showing some of the details of each. The basic question of numerical stability of the elastohydrodynamic lubrication solutions, especially in the pressure spike region, is considered. Computers used to solve this important class of lubrication problems are briefly described, with emphasis on supercomputers.

  5. Regeneration of used lubricating oil as a source of energy

    Directory of Open Access Journals (Sweden)

    A. T. Abdulrahim

    2001-10-01

    Full Text Available Conservation of natural resources by refining used lubricating oil was attempted in this work. Used lubricating oil was purified and distilled. The distillates obtained were divided into two temperature ranges of 60 - 210°C and 210 - 310°C. Analyses of the physicochemical properties of the two samples revealed that they have similar properties with gasoline and diesel fuels respectively. This result shows that used lubricating oils, which are usually regarded as waste, can be regenerated to obtain useful hydrocarbons that can be used as fuels to power internal combustion engines

  6. Investigation of Lubrication Properties of Petroleum Fuel and Biohydrocarbon Blends

    Directory of Open Access Journals (Sweden)

    Gawron Bartosz

    2016-07-01

    Full Text Available The paper covers issues regarding lubricity of petroleum fuels used in piston and turbine engines, containing hydrocarbon biocomponents. Basing on available literature it can be said that the most prospective fuel components are biohydrocarbons. The paper describes effect of biohydrocarbons included in aviation fuel and diesel fuel on lubricity of such blends. The analysis covers two processes for obtaining biohydrocarbons, the HVO and the Fischer-Tropsch process. Due to problems with actual products acquiring, biohydrocarbons models representing chemically the actual ones from specific process. Lubricity testing was carried out according to standard test methods.

  7. Radiographers' opinions on radiography research in Norway – A national survey

    International Nuclear Information System (INIS)

    Vikestad, K.G.; Hafskjold, L.; Kjelle, E.; Sebuødegård, S.; Hofvind, S.

    2017-01-01

    Objective: The objective of the Norwegian Radiography Research Group is to establish a strategy for radiography research in Norway. A survey investigating radiographers' opinions on research was conducted to establish a basis for this strategy. Methods: A questionnaire was sent to all members of the Norwegian Society of Radiographers using the society's e-mail list from May 2014 (n = 2273). The respondents, 31% (n = 697), were divided into six groups; general radiographers (n = 392), specialised radiographers (n = 124), managers (n = 74), radiation therapists (n = 59), professors (n = 13), and others (n = 35). The questionnaire included four parts: introduction, participation in research, research performed at the respondent's work place, and opinions on radiography research. The first parts consisted of close-ended questions, while the fourth part also included a Likert scale. Results: Among all respondents, 63% respondents agreed that there is a need for radiography research and 50% agreed that general radiographers/radiation therapists should be the principal investigators of such research. However, only 19% reported participation in a research project during the last five years, and of those, 50% knew how the results of their research had been communicated. Conclusion: The majority of radiographers agreed that there was a need for radiography research and that radiographers/radiation therapists should take a leading role in such work. The results indicate that radiographers/radiation therapists would benefit from training in informal and formal research skills. - Highlights: • Two in ten radiographers took part in research activity in Norway. • Six in ten agreed that there is a need for radiographic related research in Norway. • Evidence-based practice, informal and formal research training represent the main aim to reach in the first strategy for radiography research in Norway.

  8. Stem cell research funding policies and dynamic innovation: a survey of open access and commercialization requirements.

    Science.gov (United States)

    Lévesque, Maroussia; Kim, Jihyun Rosel; Isasi, Rosario; Knoppers, Bartha Maria; Plomer, Aurora; Joly, Yann

    2014-08-01

    This article compares and contrasts the pressures of both open access data sharing and commercialization policies in the context of publicly funded embryonic stem cell research (SCR). First, normative guidelines of international SCR organizations were examined. We then examined SCR funding guidelines and the project evaluation criteria of major funding organizations in the EU, the United Kingdom (UK), Spain, Canada and the United States. Our survey of policies revealed subtle pressures to commercialize research that include: increased funding availability for commercialization opportunities, assistance for obtaining intellectual property rights (IPRs) and legislation mandating commercialization. In lieu of open access models, funders are increasingly opting for limited sharing models or "protected commons" models that make the research available to researchers within the same region or those receiving the same funding. Meanwhile, there still is need for funding agencies to clarify and standardize terms such as "non-profit organizations" and "for-profit research," as more universities are pursuing for-profit or commercial opportunities.

  9. Prospect and current situation survey of nuclear agricultural research in china

    International Nuclear Information System (INIS)

    Chai Lihong; Ye Qingfu; Hua Yuejin

    2008-01-01

    Based on the survey result, which investigated 22 related institutes and universities in the field of nuclear agricultural sciences in China in Sep. 2007, this paper introduces the current status of research conditions, existing facilities and research progress on isotope tracing technology, new biological resources creation, research of nuclear irradiation and irradiation processing technology form 1996 to 2006. Due to not enough financial supports on this field, the development of nuclear agricultural sciences was slow down. However, the solid basis set up during last several decades, and the great efforts made by all the researchers, significant social and economic achievements were gained. Some of the researches have already taken the leading position in the world. (authors)

  10. Long-Term Research in Ecology and Evolution (LTREE): 2015 survey data.

    Science.gov (United States)

    Bradford, Mark A; Leiserowitz, Anthony; Feinberg, Geoffrey; Rosenthal, Seth A; Lau, Jennifer A

    2017-11-01

    To systematically assess views on contributions and future activities for long-term research in ecology and evolution (LTREE), we conducted and here provide data responses and associated metadata for a survey of ecological and evolutionary scientists. The survey objectives were to: (1) Identify and prioritize research questions that are important to address through long-term, ecological field experiments; and (2) understand the role that these experiments might play in generating and applying ecological and evolutionary knowledge. The survey was developed adhering to the standards of the American Association for Public Opinion Research. It was administered online using Qualtrics Survey Software. Survey creation was a multi-step process, with questions and format developed and then revised with, for example, input from an external advisory committee comprising senior and junior ecological and evolutionary researchers. The final questionnaire was released to ~100 colleagues to ensure functionality and then fielded 2 d later (January 7 th , 2015). Two professional societies distributed it to their membership, including the Ecological Society of America, and it was posted to three list serves. The questionnaire was available through February 8th 2015 and completed by 1,179 respondents. The distribution approach targeted practicing ecologists and evolutionary biologists in the U.S. Quantitative (both ordinal and categorical) closed-ended questions used a predefined set of response categories, facilitating direct comparison across all respondents. Qualitative, open-ended questions, provided respondents the opportunity to develop their own answers. We employed quantitative questions to score views on the extent to which long-term experimental research has contributed to understanding in ecology and evolutionary biology; its role compared to other approaches (e.g., short-term experiments); justifications for and caveats to long-term experiments; and the relative importance

  11. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design

    Science.gov (United States)

    Corwin, Lisa A.; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L.

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students’ perceptions of three design features of biology lab courses: 1) collaboration, 2) discovery and relevance, and 3) iteration. We assessed the psychometric properties of the LCAS using established methods for instrument design and validation. We also assessed the ability of the LCAS to differentiate between CUREs and traditional laboratory courses, and found that the discovery and relevance and iteration scales differentiated between these groups. Our results indicate that the LCAS is suited for characterizing and comparing undergraduate biology lab courses and should be useful for determining the relative importance of the three design features for achieving student outcomes. PMID:26466990

  12. FY2000 survey report research and development internationalization in industrial sector among APEC economies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    A survey is conducted and a database is constructed on internationalization of research and development activities in the industrial sectors of APEC (Asia-Pacific Economic Cooperation Conference) countries, namely, on research and development support systems, research and development appropriations, research and development personnel, research VISA granting procedures and control over foreign funds, trends of research and development among private sector businesses, main research and development organizations, evaluation by private sector businesses of the research and development environments of their countries, and the like. Incorporated into the database are Australia, Brunei, Canada, Chile, China, Hong Kong, Indonesia, Japan, Korea, Malaysia, Mexico, New Zealand, Papua New Guinea, Peru, Philippines, Russia, Singapore, Chinese Taipei, Thailand, United States, and Vietnam. The database, compiled for Internet web pages, CD-ROMs, and publications, covers the industrial technology related policies of all the countries and helps understand the research and development systems, and enables access to main research organizations. The database comprises a general section dealing with the background, system constitution, and internationalization trend and a countries section collecting information on the respective countries. (NEDO)

  13. Surveying views on Payments for Ecosystem Services: implications for environmental management and research

    OpenAIRE

    Waylen, KJ; Martin-Ortega, J

    2018-01-01

    The concept of Payments for Ecosystem Services (PES) is globally of increasing interest. However, little is known about the views and expectations of professionals and practitioners expected to enable or implement this concept. Since these individuals design, select, shape and deliver environmental management, their views and expectations are critical to understanding how PES may play out in practice. Using the first survey on this topic, in the UK this research discusses the implications for...

  14. Environmental survey at the AAEC Research Establishment, Lucas Heights - results for 1979

    International Nuclear Information System (INIS)

    Giles, M.S.; Dudaitis, A.

    1980-09-01

    This report presents the results of the environmental survey at the AAEC Research Establishment, Lucas Heights, during 1979. They show that the only radioactivity detected which could be of AAECRE origin and which could also be ingested by humans was due to tritium. The maximum credible dose which a member of the public could receive from this radioactivity is calculated to be one ten thousandth of the derived working limit consistent with the latest recommendations of the International Commission on Radiological Protection

  15. On the matter of synovial fluid lubrication: implications for Metal-on-Metal hip tribology.

    Science.gov (United States)

    Myant, Connor; Cann, Philippa

    2014-06-01

    Artificial articular joints present an interesting, and difficult, tribological problem. These bearing contacts undergo complex transient loading and multi axes kinematic cycles, over extremely long periods of time (>10 years). Despite extensive research, wear of the bearing surfaces, particularly metal-metal hips, remains a major problem. Comparatively little is known about the prevailing lubrication mechanism in artificial joints which is a serious gap in our knowledge as this determines film formation and hence wear. In this paper we review the accepted lubrication models for artificial hips and present a new concept to explain film formation with synovial fluid. This model, recently proposed by the authors, suggests that interfacial film formation is determined by rheological changes local to the contact and is driven by aggregation of synovial fluid proteins. The implications of this new mechanism for the tribological performance of new implant designs and the effect of patient synovial fluid properties are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. Mechanical and tribological behaviour of molten salt processed self-lubricated aluminium composite under different treatments

    Science.gov (United States)

    Kannan, C.; Ramanujam, R.

    2018-05-01

    The aim of this research work is to evaluate the mechanical and tribological behaviour of Al 7075 based self-lubricated hybrid nanocomposite under different treated conditions viz. as-cast, T6 and deep cryo treated. In order to overcome the drawbacks associated with conventional stir casting, a combinational approach that consists of molten salt processing, ultrasonic assistance and optimized mechanical stirring is adopted in this study to fabricate the nanocomposite. The mechanical characterisation tests carried out on this nanocomposite reveals an improvement of about 39% in hardness and 22% in ultimate tensile strength possible under T6 condition. Under specific conditions, the wear rate can be reduced to the extent of about 63% through the usage of self-lubricated hybrid nanocomposite under T6 condition.

  17. Radiological survey of the former Kellex Research Facility, Jersey City, New Jersey

    International Nuclear Information System (INIS)

    Berven, B.A.; Dickson, H.W.; Goldsmith, W.A.; Johnson, W.M.; Cottrell, W.D.; Doane, R.W.; Haywood, F.F.; Ryan, M.T.; Shinpaugh, W.H.

    1982-02-01

    A radiological survey has been conducted at the site of the former Kellex Corporation Research Facility in Jersey City, New Jersey. Kellex played a major role in the Manhattan Project, particularly in the area of engineering research in gaseous diffusion for uranium enrichment. As a result of those operations and subsequent work with radioactive materials, this site was selected for a radiological survey by the Department of Energy (DOE) [then Energy Research and Development Administration (ERDA)] in its program aimed at reviewing and documenting the radiological status of properties associated with early source material contracts. The survaty included measurement of external gamma radiation, beta-gamma surface dose rates, alpha and beta surface contamination, concentrations of selected radionuclides in surface and subsurface soil and water on the site, and background radiation in the northern part of New Jersey. The results of the radiological survey indicate radionuclide concentrations in the soil and water on the former Kellex property are within background levels, with the exception of nine isolated and well-defined areas on the site of the former Kellex Laboratory

  18. Influence of the Lubricant Type on the Surface Quality of Steel Parts Obtained by Ironing

    Directory of Open Access Journals (Sweden)

    D. Adamović

    2015-06-01

    Full Text Available If it is needed to achieve a higher strain rate during the ironing process, which is possible without inter-stage annealing, the ironing is performed in succession through multiple dies. During that process, changes of friction conditions occur due to the change of contact conditions (dislodging of lubricants, changes of surface roughness, formation of friction junctions, etc.. In the multistage ironing, after each stage, the completely new conditions on the contact surfaces occur, which will significantly affect the quality of the workpiece surface. Lubricant has a very important role during the steel sheet metal ironing process; to separate the sheet metal surface from the tool and to reduce the friction between the contact surfaces. The influence of tribological conditions in ironing process is extremely important and it was a subject of study among researches in recent years, both in the real processes and on the tribo-models. Investigation of tribological conditions in the real processes is much longer and more expensive, so testing on the tribo-models is more frequent. Experimental research on the original tribo-model presented in this paper was aimed to indicate the changes that occur during multistage ironing, as well as to consider the impact of some factors (tool material, lubricant on die and punch on increase or decrease of the sheet metal surface roughness in ironing stages.

  19. Research priorities in health communication and participation: international survey of consumers and other stakeholders

    Science.gov (United States)

    Bragge, Peter; Lowe, Dianne; Nunn, Jack S; O’Sullivan, Molly; Horvat, Lidia; Tong, Allison; Kay, Debra; Ghersi, Davina; McDonald, Steve; Poole, Naomi; Bourke, Noni; Lannin, Natasha; Vadasz, Danny; Oliver, Sandy; Carey, Karen; Hill, Sophie J

    2018-01-01

    Objective To identify research priorities of consumers and other stakeholders to inform Cochrane Reviews in ‘health communication and participation’ (including such concepts as patient experience, shared decision-making and health literacy). Setting International. Participants We included anyone with an interest in health communication and participation. Up to 151 participants (18–80 years; 117 female) across 12 countries took part, including 48 consumers (patients, carers, consumer representatives) and 75 professionals (health professionals, policymakers, researchers) (plus 25 people who identified as both). Design Survey. Methods We invited people to submit their research ideas via an online survey open for 4 weeks. Using inductive thematic analysis, we generated priority research topics, then classified these into broader themes. Results Participants submitted 200 research ideas, which we grouped into 21 priority topics. Key research priorities included: insufficient consumer involvement in research (19 responses), ‘official’ health information is contradictory and hard to understand (18 responses), communication/coordination breakdowns in health services (15 responses), health information provision a low priority for health professionals (15 responses), insufficient eliciting of patient preferences (14 responses), health services poorly understand/implement patient-centred care (14 responses), lack of holistic care impacting healthcare quality and safety (13 responses) and inadequate consumer involvement in service design (11 responses). These priorities encompassed acute and community health settings, with implications for policy and research. Priority populations of interest included people from diverse cultural and linguistic backgrounds, carers, and people with low educational attainment, or mental illness. Most frequently suggested interventions focused on training and cultural change activities for health services and health professionals

  20. Evidence-informed health policy 2 - survey of organizations that support the use of research evidence.

    Science.gov (United States)

    Lavis, John N; Paulsen, Elizabeth J; Oxman, Andrew D; Moynihan, Ray

    2008-12-17

    Previous surveys of organizations that support the development of evidence-informed health policies have focused on organizations that produce clinical practice guidelines (CPGs) or undertake health technology assessments (HTAs). Only rarely have surveys focused at least in part on units that directly support the use of research evidence in developing health policy on an international, national, and state or provincial level (i.e., government support units, or GSUs) that are in some way successful or innovative or that support the use of research evidence in low- and middle-income countries (LMICs). We drew on many people and organizations around the world, including our project reference group, to generate a list of organizations to survey. We modified a questionnaire that had been developed originally by the Appraisal of Guidelines, Research and Evaluation in Europe (AGREE) collaboration and adapted one version of the questionnaire for organizations producing CPGs and HTAs, and another for GSUs. We sent the questionnaire by email to 176 organizations and followed up periodically with non-responders by email and telephone. We received completed questionnaires from 152 (86%) organizations. More than one-half of the organizations (and particularly HTA agencies) reported that examples from other countries were helpful in establishing their organization. A higher proportion of GSUs than CPG- or HTA-producing organizations involved target users in the selection of topics or the services undertaken. Most organizations have few (five or fewer) full-time equivalent (FTE) staff. More than four-fifths of organizations reported providing panels with or using systematic reviews. GSUs tended to use a wide variety of explicit valuation processes for the research evidence, but none with the frequency that organizations producing CPGs, HTAs, or both prioritized evidence by its quality. Between one-half and two-thirds of organizations do not collect data systematically about

  1. Present condition of survey research on actualization strategy of fast breeding reactor (FBR) cycling. General outlines on the research

    International Nuclear Information System (INIS)

    Hara, Hideaki

    2001-01-01

    The Japan Nuclear Cycle Development Institute (JNC) started the survey research on actualization strategy of FBR cycling under cooperation of related organizations such as electric business company and so on, on July, 1999. The research aims at preparation of technical system to establish the FBR cycling for a future main energy supply source by extracting an actualization picture maximum activated advantages originally haven by the FBR cycling and by proposing a developmental strategy flexibly responsible to diverse needs in future society. Here was reported on effort state of its phase 1 (two years between 1999 and 2000 fiscal years). In the phase 1, it was planned to perform research and development shown as follows: 1) Extraction of actualization candidate concept on the FBR cycling under a premise of safety security and a viewpoint of evaluation on economics, resource effective usage, environmental loading reduction, and nuclear dispersion resistance by conducting investigation and evaluation of wide technical choices adopting innovative techniques, and 2) Embodiment of a research and development program of phase 2 (from 2001 to 2005 fiscal years) by investigating some technical subjects important for selection of research and development program aiming at actualization and its candidate concept on the FBR cycling. (G.K.)

  2. Survey, Research And Prospect Of Signage Systems In National Parks In Yunnan Province

    Directory of Open Access Journals (Sweden)

    wenjuan XU

    2018-01-01

    Full Text Available The Signage System is essential to establishing a national park. The authors conducted surveys, analysis and research of identification signs, informational sign, directional signs and functional signs from the signage systems adopted by five national parks in Yunnan Province. Relying on the results, with reference to industry experience, years of research related to national park, successful cases of overseas national parks and the current signage systems across China’s national parks, the paper aims to explore future development strategies of national park signage systems that are suitable for China.

  3. Towards the development of a comprehensive framework: Qualitative systematic survey of definitions of clinical research quality.

    Directory of Open Access Journals (Sweden)

    Belinda von Niederhäusern

    Full Text Available To systematically survey existing definitions, concepts, and criteria of clinical research quality, both developed by stakeholder groups as well as in the medical literature. This study serves as a first step in the development of a comprehensive framework for the quality of clinical research.We systematically and in duplicate searched definitions, concepts and criteria of clinical research quality on websites of stakeholders in clinical research until no further insights emerged and in MEDLINE up to February 2015. Stakeholders included governmental bodies, regulatory agencies, the pharmaceutical industry, academic and commercial contract research organizations, initiatives, research ethics committees, patient organizations and funding agencies from 13 countries. Data synthesis involved descriptive and qualitative analyses following the Framework Method on definitions, concepts, and criteria of clinical research quality. Descriptive codes were applied and grouped into clusters to identify common and stakeholder-specific quality themes.Stakeholder concepts on how to assure quality throughout study conduct or articles on quality assessment tools were common, generally with no a priori definition of the term quality itself. We identified a total of 20 explicit definitions of clinical research quality including varying quality dimensions and focusing on different stages in the clinical research process. Encountered quality dimensions include ethical conduct, patient safety/rights/priorities, internal validity, precision of results, generalizability or external validity, scientific and societal relevance, transparency and accessibility of information, research infrastructure and sustainability. None of the definitions appeared to be comprehensive either in terms of quality dimensions, research stages, or stakeholder perspectives.Clinical research quality is often discussed but rarely defined. A framework defining clinical research quality across

  4. Towards the development of a comprehensive framework: Qualitative systematic survey of definitions of clinical research quality

    Science.gov (United States)

    von Niederhäusern, Belinda; Schandelmaier, Stefan; Mi Bonde, Marie; Brunner, Nicole; Hemkens, Lars G.; Rutquist, Marielle; Bhatnagar, Neera; Guyatt, Gordon H.; Pauli-Magnus, Christiane; Briel, Matthias

    2017-01-01

    Objective To systematically survey existing definitions, concepts, and criteria of clinical research quality, both developed by stakeholder groups as well as in the medical literature. This study serves as a first step in the development of a comprehensive framework for the quality of clinical research. Study design and setting We systematically and in duplicate searched definitions, concepts and criteria of clinical research quality on websites of stakeholders in clinical research until no further insights emerged and in MEDLINE up to February 2015. Stakeholders included governmental bodies, regulatory agencies, the pharmaceutical industry, academic and commercial contract research organizations, initiatives, research ethics committees, patient organizations and funding agencies from 13 countries. Data synthesis involved descriptive and qualitative analyses following the Framework Method on definitions, concepts, and criteria of clinical research quality. Descriptive codes were applied and grouped into clusters to identify common and stakeholder-specific quality themes. Results Stakeholder concepts on how to assure quality throughout study conduct or articles on quality assessment tools were common, generally with no a priori definition of the term quality itself. We identified a total of 20 explicit definitions of clinical research quality including varying quality dimensions and focusing on different stages in the clinical research process. Encountered quality dimensions include ethical conduct, patient safety/rights/priorities, internal validity, precision of results, generalizability or external validity, scientific and societal relevance, transparency and accessibility of information, research infrastructure and sustainability. None of the definitions appeared to be comprehensive either in terms of quality dimensions, research stages, or stakeholder perspectives. Conclusion Clinical research quality is often discussed but rarely defined. A framework defining

  5. Characterizing researchers by strategies used for retaining minority participants: results of a national survey.

    Science.gov (United States)

    Butler, James; Quinn, Sandra C; Fryer, Craig S; Garza, Mary A; Kim, Kevin H; Thomas, Stephen B

    2013-09-01

    Limited attention has been given to the optimal strategies for retaining racial and ethnic minorities within studies and during the follow-up period. High attrition limits the interpretation of results and reduces the ability to translate findings into successful interventions. This study examined the retention strategies used by researchers when retaining minorities in research studies. From May to August 2010, we conducted an online survey with researchers (principal investigators, research staff, and IRB members) and examined their use of seven commonly used retention strategies. The number and type of retention strategies used, how these strategies differ by researcher type, and other characteristics (e.g., funding) were explored. We identified three clusters of researchers: comprehensive retention strategy researchers - utilized the greatest number of retention strategies; moderate retention strategy researchers - utilized an average number of retention strategies; and limited retention strategy researchers - utilized the least number of retention strategies. The comprehensive and moderate retention strategy researchers were more likely than the limited retention strategy researchers to conduct health outcomes research, work with a community advisory board, hire minority staff, use steps at a higher rate to overcome retention barriers, develop new partnerships with the minority community, modify study materials for the minority population, and allow staff to work flexible schedules. This study is a novel effort to characterize researchers, without implying a value judgment, according to their use of specific retention strategies. It provides critical information for conducting future research to determine the effectiveness of using a combination of retention strategies. Copyright © 2013. Published by Elsevier Inc.

  6. Influence of lubricant on the pitting capacity of gears. Comparison and discussion of main pitting test methods

    Energy Technology Data Exchange (ETDEWEB)

    Hoehn, Bernd-Robert; Oster, Peter; Tobie, Thomas; Hergesell, Maria [Forschungsstelle fuer Zahnraeder und Getriebebau, Technische Univ. Muenchen, Garching (Germany)

    2009-07-01

    The lubricant in a gearbox should provide a separating lubricating film between the meshing teeth. Furthermore its main task is the evacuation of the developing heat. Hence the lubricant is also an important influence parameter on the pitting life time of gearsets. Due to the constantly rising demands for higher power transmission of gearsets, also higher demands are made against the performance of the lubricants. In order to quantify the capability and to choose the appropriate lubricant for each application, reliable testing methods are necessary. Therefor today different testing methods are available. Two of the main pitting testing methods are the Standard Pittingtest according to FVA 2/IV [2] and its advancement, the Practice Relevant Pittingtest according to FVA 371 [4]. For the Practice Relevant Pittingtest test gears with profile modification and lengthwise crowning are used, which are superfinished. For the introduction of the Practice Relevant Pittingtest into industrial application a round robin test was performed in co-operation with FVA and DGMK. This paper is discussing the today usual testing methods regarding the pitting load capacity of lubricants and their characteristics in comparison. Furthermore the results of the round robin test and further example results, including pictures of typical pittings, are presented. In addition it is demonstrated, how to deal with the results. On the basis of test experience, knowledge from research projects and other examples typical questions concerning the different testing methods are discussed. Thereby essential requirements for reliable and reproducible results are pointed out and possible limits for the application of the test methods are represented. (orig.)

  7. Kinetics approach to modeling of polymer additive degradation in lubricants

    Institute of Scientific and Technical Information of China (English)

    llyaI.KUDISH; RubenG.AIRAPETYAN; Michael; J.; COVITCH

    2001-01-01

    A kinetics problem for a degrading polymer additive dissolved in a base stock is studied.The polymer degradation may be caused by the combination of such lubricant flow parameters aspressure, elongational strain rate, and temperature as well as lubricant viscosity and the polymercharacteristics (dissociation energy, bead radius, bond length, etc.). A fundamental approach tothe problem of modeling mechanically induced polymer degradation is proposed. The polymerdegradation is modeled on the basis of a kinetic equation for the density of the statistical distribu-tion of polymer molecules as a function of their molecular weight. The integrodifferential kineticequation for polymer degradation is solved numerically. The effects of pressure, elongational strainrate, temperature, and lubricant viscosity on the process of lubricant degradation are considered.The increase of pressure promotes fast degradation while the increase of temperature delaysdegradation. A comparison of a numerically calculated molecular weight distribution with an ex-perimental one obtained in bench tests showed that they are in excellent agreement with eachother.

  8. Nuclear fuel handling grapple carriage with self-lubricating bearing

    International Nuclear Information System (INIS)

    1977-01-01

    This invention relates to the provision of a fuel handling grapple carriage for a sodium cooled fast breeder reactor with sodium coolant lubricated bearings in which contamination of the bearings is prevented. (UK)

  9. Supporting Information Synthesis of fatty monoester lubricant base ...

    Indian Academy of Sciences (India)

    Synthesis of fatty monoester lubricant base oil catalyzed by Fe-Zn ... Physical properties of fatty acid monoesters viz., kinematic viscosity, viscosity index, density ... The analysis method involves titration of the diluted sample with ethanolic alkali ...

  10. Effects of Vaginal Lubricants on In-Vitro Progressive Spermatozoa ...

    African Journals Online (AJOL)

    USER

    African Journal of Reproductive Health September 2017; 21 (3): 96. ORIGINAL ... *For Correspondence: E-mail: Sureshk@dut.ac.za; Phone: +27-31-373-5291 .... marketed around the world. ... of many top selling brands of sexual lubricants to.

  11. Impact of lubrication on the tribological behaviour of PTFE ...

    Indian Academy of Sciences (India)

    bronze and bronze + molybdenum disulfide (MoS2) were considered. These composites were ... the PTFE composites have significantly been reduced in the lubricated condition ... there are no strong bonds between the fillers and the matrix in.

  12. Sexual lubricants in South Africa may potentially disrupt mucosal ...

    African Journals Online (AJOL)

    more likely to result in HIV transmission than unprotected vaginal intercourse due to ... Distribution of condoms and water-based sexual lubricants forms a cornerstone of .... Organisations such as the US Centers for Disease. Control and the ...

  13. Compatibility of refrigerants and lubricants with elastomers. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hamed, G.R.; Seiple, R.H.; Taikum, Orawan

    1994-01-01

    The information contained in this report is designed to assist the air-conditioning and refrigeration industry in the selection of suitable elastomeric gasket and seal materials that will prove useful in various refrigerant and refrigeration lubricant environments. In part I of the program the swell behavior in the test fluids has been determined using weight and in situ diameter measurements for the refrigerants and weight, diameter and thickness measurements for the lubricants. Weight and diameter measurements are repeated after 2 and 24 hours for samples removed fro the refrigerant test fluids and 24 hours after removal from the lubricants. Part II of the testing program includes the evaluation of tensile strength, hardness, weight, and dimensional changes after immersion aging in refrigerant/lubricant mixtures of selected elastomer formulations at elevated temperature and pressure.

  14. Fiscal 1992 survey report. Survey of research trends in search for important research domains; 1992 nendo juten kenkyu ryoiki tansaku no tame no kenkyu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    For contribution of suggestions for establishing directions and concrete tasks for new industrial technology research and development projects, a survey is conducted about trends of industrial technology development and into research domains where importance will gather in the future, for which development trends are studied such as limiting, providing of intelligence, and advanced composition. In this report, domains expected to become important in the future are investigated. Important subjects are found in the domains of the space limiting (micromachining, atom/molecule manipulation, microanalysis, etc.), the time limiting (super-spacetime processing, quantum device, femtosecond technology, 4-dimensional device, etc.), biomimetics and providing of intelligence (intelligent material, neural network, genetic algorithm, artificial life, sensor fusion, intelligent robot, etc.). In addition to these, 'ultrastructure that learns from organisms,' 'intensive interaction system,' and 'nonlinearity/chaos technology' are proposed as promising fields of development. Since Japan is traditionally strong in hardware technologies relating to micromachining and substance/material processing, good results will be attained when the industrial, governmental, and academic circles exert endeavors. (NEDO)

  15. Fiscal 1992 survey report. Survey of research trends in search for important research domains; 1992 nendo juten kenkyu ryoiki tansaku no tame no kenkyu doko chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-03-01

    For contribution of suggestions for establishing directions and concrete tasks for new industrial technology research and development projects, a survey is conducted about trends of industrial technology development and into research domains where importance will gather in the future, for which development trends are studied such as limiting, providing of intelligence, and advanced composition. In this report, domains expected to become important in the future are investigated. Important subjects are found in the domains of the space limiting (micromachining, atom/molecule manipulation, microanalysis, etc.), the time limiting (super-spacetime processing, quantum device, femtosecond technology, 4-dimensional device, etc.), biomimetics and providing of intelligence (intelligent material, neural network, genetic algorithm, artificial life, sensor fusion, intelligent robot, etc.). In addition to these, 'ultrastructure that learns from organisms,' 'intensive interaction system,' and 'nonlinearity/chaos technology' are proposed as promising fields of development. Since Japan is traditionally strong in hardware technologies relating to micromachining and substance/material processing, good results will be attained when the industrial, governmental, and academic circles exert endeavors. (NEDO)

  16. Assessing the Impact of Research: A Case Study of the LSAY Research Innovation and Expansion Fund. Longitudinal Surveys of Australian Youth. Occasional Paper

    Science.gov (United States)

    Hargreaves, Jo

    2012-01-01

    The purpose of this project is to apply the framework developed by the National Centre for Vocational Education Research (NCVER) for measuring research impact to assess the outcomes of the research and activities funded under the Longitudinal Surveys of Australian Youth (LSAY) Research Innovation and Expansion Fund (RIEF). LSAY provides a rich…

  17. Extent, Awareness and Perception of Dissemination Bias in Qualitative Research: An Explorative Survey

    Science.gov (United States)

    Toews, Ingrid; Glenton, Claire; Lewin, Simon; Berg, Rigmor C.; Noyes, Jane; Booth, Andrew; Marusic, Ana; Malicki, Mario; Munthe-Kaas, Heather M.; Meerpohl, Joerg J.

    2016-01-01

    Background Qualitative research findings are increasingly used to inform decision-making. Research has indicated that not all quantitative research on the effects of interventions is disseminated or published. The extent to which qualitative researchers also systematically underreport or fail to publish certain types of research findings, and the impact this may have, has received little attention. Methods A survey was delivered online to gather data regarding non-dissemination and dissemination bias in qualitative research. We invited relevant stakeholders through our professional networks, authors of qualitative research identified through a systematic literature search, and further via snowball sampling. Results 1032 people took part in the survey of whom 859 participants identified as researchers, 133 as editors and 682 as peer reviewers. 68.1% of the researchers said that they had conducted at least one qualitative study that they had not published in a peer-reviewed journal. The main reasons for non-dissemination were that a publication was still intended (35.7%), resource constraints (35.4%), and that the authors gave up after the paper was rejected by one or more journals (32.5%). A majority of the editors and peer reviewers “(strongly) agreed” that the main reasons for rejecting a manuscript of a qualitative study were inadequate study quality (59.5%; 68.5%) and inadequate reporting quality (59.1%; 57.5%). Of 800 respondents, 83.1% “(strongly) agreed” that non-dissemination and possible resulting dissemination bias might undermine the willingness of funders to support qualitative research. 72.6% and 71.2%, respectively, “(strongly) agreed” that non-dissemination might lead to inappropriate health policy and health care. Conclusions The proportion of non-dissemination in qualitative research is substantial. Researchers, editors and peer reviewers play an important role in this. Non-dissemination and resulting dissemination bias may impact on

  18. Extent, Awareness and Perception of Dissemination Bias in Qualitative Research: An Explorative Survey.

    Directory of Open Access Journals (Sweden)

    Ingrid Toews

    Full Text Available Qualitative research findings are increasingly used to inform decision-making. Research has indicated that not all quantitative research on the effects of interventions is disseminated or published. The extent to which qualitative researchers also systematically underreport or fail to publish certain types of research findings, and the impact this may have, has received little attention.A survey was delivered online to gather data regarding non-dissemination and dissemination bias in qualitative research. We invited relevant stakeholders through our professional networks, authors of qualitative research identified through a systematic literature search, and further via snowball sampling.1032 people took part in the survey of whom 859 participants identified as researchers, 133 as editors and 682 as peer reviewers. 68.1% of the researchers said that they had conducted at least one qualitative study that they had not published in a peer-reviewed journal. The main reasons for non-dissemination were that a publication was still intended (35.7%, resource constraints (35.4%, and that the authors gave up after the paper was rejected by one or more journals (32.5%. A majority of the editors and peer reviewers "(strongly agreed" that the main reasons for rejecting a manuscript of a qualitative study were inadequate study quality (59.5%; 68.5% and inadequate reporting quality (59.1%; 57.5%. Of 800 respondents, 83.1% "(strongly agreed" that non-dissemination and possible resulting dissemination bias might undermine the willingness of funders to support qualitative research. 72.6% and 71.2%, respectively, "(strongly agreed" that non-dissemination might lead to inappropriate health policy and health care.The proportion of non-dissemination in qualitative research is substantial. Researchers, editors and peer reviewers play an important role in this. Non-dissemination and resulting dissemination bias may impact on health care research, practice and policy

  19. 1988 Delphi survey of nursing research priorities for New York State.

    Science.gov (United States)

    Shortridge, L; Doswell, W; Evans, M E; Levin, R F; Millor, G K; Carter, E

    1989-09-01

    In order to inform decisions about nursing research and health care policy, the Council on Nursing Research of the New York State Nurses Association (NYSNA) conducted a Delphi survey to identify the priorities for nursing research in New York state. The Delphi technique is a method of eliciting judgements from experts for the purpose of short-term forecasting and planning. The survey was conducted by mail in three rounds during 1988. Round I required participants to identify three primary research priorities for the nursing profession. In Round II participants ranked the 37 most frequently identified categories from Round I. The highest 16 categories from Round II were ranked by participants in Round III to provide the final 10 nursing research priority categories for New York state. All members of the New York State Nurses Association holding a minimum of a master's degree in nursing were invited to participate. The response rates were: Round I, 34% (N = 872); Round II, 38% (N = 985); Round III 37% (N = 974). Of the 10 nursing research priority categories identified in the final round, 5 relate to nurses, 2 relate to nursing, and 3 relate to clients. None of the high-risk conditions or populations with whom nurses work appear in the top 10, and only 2 of these are ranked in the top 15 priority categories. These priority categories will be used by the NYSNA Council on Nursing Research to influence its future agenda and activities. They can be used by the nursing profession and others for planning, policy making, and establishing nursing research funding priorities.(ABSTRACT TRUNCATED AT 250 WORDS)

  20. Engineered Joint Lubrication for OA Prevention and Treatment

    Science.gov (United States)

    2015-09-01

    that work together with liquid lubricants to achieve low-friction systems. Lubrication between tissues is also important to maintain low-friction...movement within a number of biological systems, including the pleural cavity, the surface of the eye, visceral organs, and diarthroidal joints3. In...purified using reverse-phase high-performance liquid chromatography (C18 Grace-Vydac column) on a water/acetonitrile gradient. Purified peptides were

  1. PARTAKE survey of public knowledge and perceptions of clinical research in India.

    Directory of Open Access Journals (Sweden)

    Tal Burt

    Full Text Available BACKGROUND: A public that is an informed partner in clinical research is important for ethical, methodological, and operational reasons. There are indications that the public is unaware or misinformed, and not sufficiently engaged in clinical research but studies on the topic are lacking. PARTAKE - Public Awareness of Research for Therapeutic Advancements through Knowledge and Empowerment is a program aimed at increasing public awareness and partnership in clinical research. The PARTAKE Survey is a component of the program. OBJECTIVE: To study public knowledge and perceptions of clinical research. METHODS: A 40-item questionnaire combining multiple-choice and open-ended questions was administered to 175 English- or Hindi-speaking individuals in 8 public locations representing various socioeconomic strata in New Delhi, India. RESULTS: Interviewees were 18-84 old (mean: 39.6, SD ± 16.6, 23.6% female, 68.6% employed, 7.3% illiterate, 26.3% had heard of research, 2.9% had participated and 58.9% expressed willingness to participate in clinical research. The following perceptions were reported (% true/% false/% not aware: 'research benefits society' (94.1%/3.5%/2.3%, 'the government protects against unethical clinical research' (56.7%/26.3%/16.9%, 'research hospitals provide better care' (67.2%/8.7%/23.9%, 'confidentiality is adequately protected' (54.1%/12.3%/33.5%, 'participation in research is voluntary' (85.3%/5.8%/8.7%; 'participants treated like 'guinea pigs'' (20.7%/53.2%/26.0%, and 'compensation for participation is adequate' (24.7%/12.9%/62.3%. CONCLUSIONS: Results suggest the Indian public is aware of some key features of clinical research (e.g., purpose, value, voluntary nature of participation, and supports clinical research in general but is unaware of other key features (e.g., compensation, confidentiality, protection of human participants and exhibits some distrust in the conduct and reporting of clinical trials. Larger, cross

  2. Thermo-Rheometric Studies of New Class Ionic Liquid Lubricants

    Science.gov (United States)

    Bakhtiyarov, Sayavur; Street, Kenneth; Scheiman, Daniel; van Dyke, Alan

    2010-11-01

    Due to their specific properties, such as small volatility, nonflammability, extreme thermal stability, low melting point, wide liquid range, and good miscibility with organic materials, ionic liquids attracted particular interest in various industrial processes. Recently, the unique properties of ionic liquids caught the attention of space tribologists. The traditional lubricating materials used in space have limited lifetimes in vacuum due to the catalytic degradation on metal surfaces, high vaporization at high temperatures, dewetting, and other disadvantages. The lubricants for the space applications must have vacuum stability, high viscosity index, low creep tendency, good elastohydrodynamic and boundary lubrication properties, radiation atomic oxygen resistance, optical or infrared transparency. Unfortunately, the properties such as heat flow, heat capacity, thermogravimetric weight loss, and non-linearity in the rheological behavior of the lubricants are not studied well for newly developed systems. These properties are crucial to analyzing thermodynamic and energy dissipative aspects of the lubrication process. In this paper we will present the rheological and heat and mass transfer measurements for the ionic liquid lubricants, their mixtures with and without additive.

  3. Knowledge and Perception about Clinical Research Shapes Behavior: Face to Face Survey in Korean General Public.

    Science.gov (United States)

    Choi, Yun Jung; Beck, Sung-Ho; Kang, Woon Yong; Yoo, Soyoung; Kim, Seong-Yoon; Lee, Ji Sung; Burt, Tal; Kim, Tae Won

    2016-05-01

    Considering general public as potential patients, identifying factors that hinder public participation poses great importance, especially in a research environment where demands for clinical trial participants outpace the supply. Hence, the aim of this study was to evaluate knowledge and perception about clinical research in general public. A total of 400 Seoul residents with no previous experience of clinical trial participation were selected, as representative of population in Seoul in terms of age and sex. To minimize selection bias, every fifth passer-by was invited to interview, and if in a cluster, person on the very right side was asked. To ensure the uniform use of survey, written instructions have been added to the questionnaire. Followed by pilot test in 40 subjects, the survey was administered face-to-face in December 2014. To investigate how perception shapes behavior, we compared perception scores in those who expressed willingness to participate and those who did not. Remarkably higher percentage of responders stated that they have heard of clinical research, and knew someone who participated (both, P perceptions and lack of knowledge will be effective in enhancing public engaged in clinical research.

  4. Development and validation of the Survey of Organizational Research Climate (SORC).

    Science.gov (United States)

    Martinson, Brian C; Thrush, Carol R; Lauren Crain, A

    2013-09-01

    Development and targeting efforts by academic organizations to effectively promote research integrity can be enhanced if they are able to collect reliable data to benchmark baseline conditions, to assess areas needing improvement, and to subsequently assess the impact of specific initiatives. To date, no standardized and validated tool has existed to serve this need. A web- and mail-based survey was administered in the second half of 2009 to 2,837 randomly selected biomedical and social science faculty and postdoctoral fellows at 40 academic health centers in top-tier research universities in the United States. Measures included the Survey of Organizational Research Climate (SORC) as well as measures of perceptions of organizational justice. Exploratory and confirmatory factor analyses yielded seven subscales of organizational research climate, all of which demonstrated acceptable internal consistency (Cronbach's α ranging from 0.81 to 0.87) and adequate test-retest reliability (Pearson r ranging from 0.72 to 0.83). A broad range of correlations between the seven subscales and five measures of organizational justice (unadjusted regression coefficients ranging from 0.13 to 0.95) document both construct and discriminant validity of the instrument. The SORC demonstrates good internal (alpha) and external reliability (test-retest) as well as both construct and discriminant validity.

  5. Development and Validation of the Survey of Organizational Research Climate (SORC)

    Science.gov (United States)

    Martinson, Brian C.; Thrush, Carol R.; Crain, A. Lauren

    2012-01-01

    Background Development and targeting efforts by academic organizations to effectively promote research integrity can be enhanced if they are able to collect reliable data to benchmark baseline conditions, to assess areas needing improvement, and to subsequently assess the impact of specific initiatives. To date, no standardized and validated tool has existed to serve this need. Methods A web- and mail-based survey was administered in the second half of 2009 to 2,837 randomly selected biomedical and social science faculty and postdoctoral fellows at 40 academic health centers in top-tier research universities in the United States. Measures included the Survey of Organizational Research Climate (SORC) as well as measures of perceptions of organizational justice. Results Exploratory and confirmatory factor analyses yielded seven subscales of organizational research climate, all of which demonstrated acceptable internal consistency (Cronbach’s α ranging from 0.81 to 0.87) and adequate test-retest reliability (Pearson r ranging from 0.72 to 0.83). A broad range of correlations between the seven subscales and five measures of organizational justice (unadjusted regression coefficients ranging from .13 to .95) document both construct and discriminant validity of the instrument. Conclusions The SORC demonstrates good internal (alpha) and external reliability (test-retest) as well as both construct and discriminant validity. PMID:23096775

  6. [Sex/Gender-sensitive Research - A Survey of Epidemiologists in Germany].

    Science.gov (United States)

    Gansefort, D; Jahn, I

    2016-07-01

    Epidemiology is the basic science of Public Health and has to provide high-quality scientific evidence for disease prevention and health care. Sex/Gender, as social and biological structure categories of population, play a central role in the analysis of epidemiological data. Whether and how epidemiologists incorporate sex/gender aspects in their research, their attitudes, needs and requirements they have in this context have hardly been investigated. These questions were addressed in a survey of epidemiologists in Germany. With the support of the respective scientific societies, an online survey was conducted of German epidemiologists, and the data subjected to descriptive analysis. Approximately 64% of the 276 participants (response rate 25%) were female and 75% worked in the academic field. 70% reported having had experience in sex/gender-sensitive research and 83% expressed future interest in this topic. Issues mentioned as important were interaction of gender aspects and other factors of social inequality as well as the inclusion of sex and gender in all phases of the research process. Women and younger participants reported more experience and more needs concerning sex/gender sensitive research. To facilitate further incorporation of sex/gender-sensitive research in epidemiology, special workshops/tutorials at the respective scientific societies' annual meetings and online information materials were rated as important. Due to the low response rate, a positive selection of participants cannot be ruled out. The results show that, while a large group of epidemiologists had experience and interest in gender-sensitive research, there are some with less interest. Possible starting points for the strengthening of sex/gender-sensitivity research include further training and involvement of scientific societies in the process. © Georg Thieme Verlag KG Stuttgart · New York.

  7. Cross-sectional online survey of research productivity in young Japanese nursing faculty.

    Science.gov (United States)

    Oyama, Yumiko; Fukahori, Hiroki; Miyashita, Mitsunori; Narama, Miho; Kono, Ayumi; Atogami, Fumi; Kashiwagi, Masayo; Okaya, Keiko; Takamizawa, Emiko; Yoshizawa, Toyoko

    2015-07-01

    To investigate the factors affecting the research productivity of young nursing faculty in Japan. An online survey targeting young nursing scholars (aged ≤ 39 years) who were members of the Japan Academy of Nursing Science was conducted from October to November 2012. Of 1634 potential respondents, 648 completed the survey (39.7%), and 400 full-time faculty of a baccalaureate degree program were selected for the analysis. The numbers of English-language and Japanese publications in the past 3 years were regressed onto personal characteristics, such as academic degree and type of university. The mean numbers of publications in English and Japanese in the past 3 years were 0.41 and 1.63, respectively. Holding a doctoral degree was significantly related to a higher number of publications in English and Japanese (e(β) = 5.78 and e(β) = 1.89, respectively). Working at a national university (e(β) = 2.15), having a research assistant (e(β) = 2.05), and the ability to read research articles in English (e(β) = 2.27) were significantly related to more English-language publications. Having the confidence to conduct quantitative research (e(β) = 1.67) was related to a larger number of Japanese publications. The lack of mentoring (e(β) = 0.97) and university workload (e(β) = 0.96) were associated with a lesser number of Japanese publications. The research productivity of young nursing faculty appeared to be quite low. Strategies to enhance research productivity in young nursing faculty, such as encouraging the achievement of a doctoral degree or enrichment of research resources, should be undertaken. © 2014 The Authors. Japan Journal of Nursing Science © 2014 Japan Academy of Nursing Science.

  8. Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts

    Energy Technology Data Exchange (ETDEWEB)

    Kovalchenko, A. M. [Inst. for Problems of Materials Science, Dept. 7, 3 Krzhizhanovsky Street, Kyiv 03142, UA (Corresponding author), e-mail: andrii.kovalchenko@gatech.edu; Erdemir, A. [Argonne National Lab., Energy Systems Division, 9700 South Cass Avenue, Argonne, IL 60439 US; Ajayi, O. O. [Argonne National Lab., Energy Systems Division, 9700 South Cass Avenue, Argonne, IL 60439 US; Etsion, I. [Technion-Israel Inst. of Technology, Dept. of Mechanical Engineering, Haifa 32000, IL

    2017-01-30

    Changing the surface texture of sliding surfaces is an effective way to manipulate friction and wear of lubricated surfaces. Having realized its potential, we have done very extensive studies on the effects of laser surface texturing (LST, which involves the creation of an array of microdimples on a surface) on friction and wear behavior of oil-lubricated steel surfaces in the early 2000s. In this paper, we reviewed some of our research accomplishments and assessed future directions of the laser texturing field in many diverse industrial applications. Our studies specifically addressed the impact of laser texturing on friction and wear of both the flat conformal and initial non-conformal point contact configurations using a pin-on-disk test rig under fully-flooded synthetic oil lubricants with different viscosities. Electrical resistance measurement between pin and LST disks was also used to determine the operating lubrication regimes in relation to friction. In conformal contact, we confirmed that LST could significantly expand the operating conditions for hydrodynamic lubrication to significantly much higher loads and slower speeds. In particular, with LST and higher viscosity oils, the low-friction full hydrodynamic regime was shifted to the far left in the Stribeck diagram. Overall, the beneficial effects of laser surface texturing were more pronounced at higher speeds and loads and with higher viscosity oil. LST was also observed to reduce the magnitude of friction coefficients in the boundary regime. For the non-conformal contact configuration, we determined that LST would produce more abrasive wear on the rubbing counterface compared to the untreated surfaces due to a reduction in lubricant fluid film thickness, as well as the highly uneven and rough nature of the textured surfaces. However, this higher initial wear rate has led to faster generation of a conformal contact, and thus transition from the high-friction boundary to lower friction mixed

  9. Nurse awareness of clinical research: a survey in a Japanese University Hospital

    Science.gov (United States)

    2014-01-01

    Background Clinical research plays an important role in establishing new treatments and improving the quality of medical practice. Since the introduction of the concept of clinical research coordinators (CRC) in Japan, investigators and CRC work as a clinical research team that coordinates with other professionals in clinical trials leading to drug approval (registration trials). Although clinical nurses collaborate with clinical research teams, extended clinical research teams that include clinical nurses may contribute to the ethical and scientific pursuit of clinical research. Methods As knowledge of clinical research is essential for establishing an extended clinical research team, we used questionnaires to survey the knowledge of clinical nurses at Tokushima University Hospital. Five-point and two-point scales were used. Questions as for various experiences were also included and the relationship between awareness and experiences were analyzed. Results Among the 597 nurses at Tokushima University Hospital, 453 (75.9%) responded to the questionnaires. In Japan, registration trials are regulated by pharmaceutical affairs laws, whereas other types of investigator-initiated research (clinical research) are conducted based on ethical guidelines outlined by the ministries of Japan. Approximately 90% of respondents were aware of registration trials and clinical research, but less than 40% of the nurses were aware of their difference. In clinical research terminology, most respondents were aware of informed consent and related issues, but ≤50% were aware of other things, such as the Declaration of Helsinki, ethical guidelines, Good Clinical Practice, institutional review boards, and ethics committees. We found no specific tendency in the relationship between awareness and past experiences, such as nursing patients who were participating in registration trials and/or clinical research or taking a part in research involving patients as a nursing student or a nurse

  10. PARTAKE Survey of Public Knowledge and Perceptions of Clinical Research in India

    Science.gov (United States)

    Burt, Tal; Dhillon, Savita; Sharma, Pooja; Khan, Danish; MV, Deepa; Alam, Sazid; Jain, Sarika; Alapati, Bhavana; Mittal, Sanjay; Singh, Padam

    2013-01-01

    Background A public that is an informed partner in clinical research is important for ethical, methodological, and operational reasons. There are indications that the public is unaware or misinformed, and not sufficiently engaged in clinical research but studies on the topic are lacking. PARTAKE – Public Awareness of Research for Therapeutic Advancements through Knowledge and Empowerment is a program aimed at increasing public awareness and partnership in clinical research. The PARTAKE Survey is a component of the program. Objective To study public knowledge and perceptions of clinical research. Methods A 40-item questionnaire combining multiple-choice and open-ended questions was administered to 175 English- or Hindi-speaking individuals in 8 public locations representing various socioeconomic strata in New Delhi, India. Results Interviewees were 18–84 old (mean: 39.6, SD±16.6), 23.6% female, 68.6% employed, 7.3% illiterate, 26.3% had heard of research, 2.9% had participated and 58.9% expressed willingness to participate in clinical research. The following perceptions were reported (% true/% false/% not aware): ‘research benefits society’ (94.1%/3.5%/2.3%), ‘the government protects against unethical clinical research’ (56.7%/26.3%/16.9%), ‘research hospitals provide better care’ (67.2%/8.7%/23.9%), ‘confidentiality is adequately protected’ (54.1%/12.3%/33.5%), ‘participation in research is voluntary’ (85.3%/5.8%/8.7%); ‘participants treated like ‘guinea pigs’’ (20.7%/53.2%/26.0%), and ‘compensation for participation is adequate’ (24.7%/12.9%/62.3%). Conclusions Results suggest the Indian public is aware of some key features of clinical research (e.g., purpose, value, voluntary nature of participation), and supports clinical research in general but is unaware of other key features (e.g., compensation, confidentiality, protection of human participants) and exhibits some distrust in the conduct and reporting of clinical trials

  11. The Researchers' View of Scientific Rigor-Survey on the Conduct and Reporting of In Vivo Research.

    Science.gov (United States)

    Reichlin, Thomas S; Vogt, Lucile; Würbel, Hanno

    2016-01-01

    Reproducibility in animal research is alarmingly low, and a lack of scientific rigor has been proposed as a major cause. Systematic reviews found low reporting rates of measures against risks of bias (e.g., randomization, blinding), and a correlation between low reporting rates and overstated treatment effects. Reporting rates of measures against bias are thus used as a proxy measure for scientific rigor, and reporting guidelines (e.g., ARRIVE) have become a major weapon in the fight against risks of bias in animal research. Surprisingly, animal scientists have never been asked about their use of measures against risks of bias and how they report these in publications. Whether poor reporting reflects poor use of such measures, and whether reporting guidelines may effectively reduce risks of bias has therefore remained elusive. To address these questions, we asked in vivo researchers about their use and reporting of measures against risks of bias and examined how self-reports relate to reporting rates obtained through systematic reviews. An online survey was sent out to all registered in vivo researchers in Switzerland (N = 1891) and was complemented by personal interviews with five representative in vivo researchers to facilitate interpretation of the survey results. Return rate was 28% (N = 530), of which 302 participants (16%) returned fully completed questionnaires that were used for further analysis. According to the researchers' self-report, they use measures against risks of bias to a much greater extent than suggested by reporting rates obtained through systematic reviews. However, the researchers' self-reports are likely biased to some extent. Thus, although they claimed to be reporting measures against risks of bias at much lower rates than they claimed to be using these measures, the self-reported reporting rates were considerably higher than reporting rates found by systematic reviews. Furthermore, participants performed rather poorly when asked to

  12. Friction of self-lubricating surfaces by ion beam techniques. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, R.S.; Rai, A.K.

    1992-05-01

    UES, Inc. conducted a research and development program designed to establish conditions for ion implantation/mixing of suitable additives into the surfaces of bulk ceramics and metals for obtaining self-lubricating low friction and wear characteristics. The substrates considered were ZrO{sub 2}, Al{sub 2}O{sub 3}, Si{sub 3}N{sub 4}, steel and Ni-base superalloy. The lubricant additives chosen were BaF{sub 2}/CaF{sub 2}Ag, MoS{sub 2}, WS{sub 2}and B{sub 2}O{sub 3}. The initial tasks of the program were to synthesis these lubricant compounds by co-implantation of constituent elements if sufficient beams of desired elements were obtained. The final tasks were to investigate high energy (MeV) ion mixing of deposited coatings as well as to investigate ion beam assisted deposition using low energy ion beams. It was shown that MoS{sub 2} can be synthesized by co-implantation of Mo{sup +} and S{sup +} in ceramic materials with appropriate choice of energies to obtain nearly overlapping depth profiles. The sliding life of DC magnetron sputtered MoS{sub 2} films of thicknesses {approximately}7500{Angstrom} on ceramic materials such as sapphire, Si{sub 3}N{sub 4} and ZrO{sub 3} were improved by ten to thousand fold after 2 Mev Ag{sup +} ion mixing. Ion beam assisted deposition (IBAD) and ion beam mixing were utilized to fabricate self-lubricating coatings of CaF{sub 2}/Ag and BaF/CaF{sub 2}/Ag composites.

  13. The U.S. Geological Survey cartographic and geographic information science research activities 2006-2010

    Science.gov (United States)

    Usery, E. Lynn

    2011-01-01

    The U.S. Geological Survey (USGS) produces geospatial databases and topographic maps for the United States of America. A part of that mission includes conducting research in geographic information science (GIScience) and cartography to support mapping and improve the design, quality, delivery, and use of geospatial data and topographic maps. The Center of Excellence for Geospatial Information Science (CEGIS) was established by the USGS in January 2006 as a part of the National Geospatial Program Office. CEGIS (http://cegis.usgs.gov) evolved from a team of cartographic researchers at the Mid-Continent Mapping Center. The team became known as the Cartographic Research group and was supported by the Cooperative Topographic Mapping, Geographic Analysis and Monitoring, and Land Remote Sensing programs of the Geography Discipline of the USGS from 1999-2005. In 2006, the Cartographic Research group and its projects (http://carto-research.er.usgs.gov/) became the core of CEGIS staff and research. In 2006, CEGIS research became focused on The National Map (http://nationalmap.gov).

  14. The state of web-based research: A survey and call for inclusion in curricula.

    Science.gov (United States)

    Krantz, John H; Reips, Ulf-Dietrich

    2017-10-01

    The first papers that reported on conducting psychological research on the web were presented at the Society for Computers in Psychology conference 20 years ago, in 1996. Since that time, there has been an explosive increase in the number of studies that use the web for data collection. As such, it seems a good time, 20 years on, to examine the health and adoption of sound practices of research on the web. The number of studies conducted online has increased dramatically. Overall, it seems that the web can be a method for conducting valid psychological studies. However, it is less clear that students and researchers are aware of the nature of web research. While many studies are well conducted, there is also a certain laxness appearing regarding the design and conduct of online studies. This laxness appears both anecdotally to the authors as managers of large sites for posting links to online studies, and in a survey of current researchers. One of the deficiencies discovered is that there is no coherent approach to educating researchers as to the unique features of web research.

  15. Critical survey of research on human factors and the man-machine interaction

    International Nuclear Information System (INIS)

    Watson, L.A.

    1984-01-01

    A case is developed for placing a high priority on research into human factors in the nuclear power industry. This is based essentially on the fact that human error is a significant factor in plant reliability and the assurance of safety. Control of human error can therefore produce benefits in the reduction of both operational costs and public risk. Descriptions are given of activities initiated by the Commission of the European Communities in conjunction with institutes within the Member States. These include: a comprehensive survey and analysis of current relevant work; considerations of classification schemes for human factors activities; the use of simulators for human factors research; and a proposed European collaborative research programme. (author)

  16. Training, Research, and Working Conditions for Urology Residents in Germany: A Contemporary Survey.

    Science.gov (United States)

    Borgmann, Hendrik; Arnold, Hannah K; Meyer, Christian P; Bründl, Johannes; König, Justus; Nestler, Tim; Ruf, Christian; Struck, Julian; Salem, Johannes

    2016-12-16

    Excellent uniform training of urology residents is crucial to secure both high-quality patient care and the future of our specialty. Residency training has come under scrutiny following the demands of subspecialized care, economical aspects, and working hour regulations. To comprehensively assess the surgical training, research opportunities, and working conditions among urology residents in Germany. We sent a 29-item online survey via email to 721 members of the German Society of Residents in Urology. Descriptive analyses were conducted to describe the surveys' four domains: (1) baseline characteristics, (2) surgical training (cumulative completed case volume for all minor-, medium-, and major-complexity surgeries), (3) research opportunities, and (4) working conditions. Four hundred and seventy-two residents completed the online survey (response rate 65%). Surgical training: the median number of cumulative completed cases for postgraduate yr (PGY)-5 residents was 113 (interquartile range: 76-178). Minor surgeries comprised 57% of all surgeries and were performed by residents in all PGYs. Medium-complexity surgeries comprised 39% of all surgeries and were mostly performed by residents in PGYs 2-5. Major surgeries comprised 4% of all surgeries and were occasionally performed by residents in PGYs 3-5. Research opportunities: some 44% have attained a medical thesis (Dr. med.), and 39% are currently pursuing research. Working conditions: psychosocial work-related stress was high and for 82% of residents their effort exceeded their rewards. Some 44% were satisfied, 32% were undecided, and 24% were dissatisfied with their current working situation. Limitations include self-reported survey answers and a lack of validated assessment tools. Surgical exposure among German urology residents is low and comprises minor and medium-complex surgeries. Psychosocial work-related stress is high for the vast majority of residents indicating the need for structural improvements in

  17. Critical Infrastructure Interdependency Modeling: A Survey of U.S. and International Research

    Energy Technology Data Exchange (ETDEWEB)

    2006-08-01

    The Nation’s health, wealth, and security rely on the production and distribution of certain goods and services. The array of physical assets, processes, and organizations across which these goods and services move are called "critical infrastructures".1 This statement is as true in the U.S. as in any country in the world. Recent world events such as the 9-11 terrorist attacks, London bombings, and gulf coast hurricanes have highlighted the importance of stable electric, gas and oil, water, transportation, banking and finance, and control and communication infrastructure systems. Be it through direct connectivity, policies and procedures, or geospatial proximity, most critical infrastructure systems interact. These interactions often create complex relationships, dependencies, and interdependencies that cross infrastructure boundaries. The modeling and analysis of interdependencies between critical infrastructure elements is a relatively new and very important field of study. The U.S. Technical Support Working Group (TSWG) has sponsored this survey to identify and describe this current area of research including the current activities in this field being conducted both in the U.S. and internationally. The main objective of this study is to develop a single source reference of critical infrastructure interdependency modeling tools (CIIMT) that could be applied to allow users to objectively assess the capabilities of CIIMT. This information will provide guidance for directing research and development to address the gaps in development. The results will inform researchers of the TSWG Infrastructure Protection Subgroup of research and development efforts and allow a more focused approach to addressing the needs of CIIMT end-user needs. This report first presents the field of infrastructure interdependency analysis, describes the survey methodology, and presents the leading research efforts in both a cumulative table and through individual datasheets. Data was

  18. U.S. Geological Survey Cooperative Fish and Wildlife Research Units Program—2016–2017 Research Abstracts

    Science.gov (United States)

    Dennerline, Donald E.; Childs, Dawn E.

    2017-04-20

    The U.S. Geological Survey (USGS) has several strategic goals that focus its efforts on serving the American people. The USGS Ecosystems Mission Area has responsibility for the following objectives under the strategic goal of “Science to Manage and Sustain Resources for Thriving Economies and Healthy Ecosystems”:Understand, model, and predict change in natural systemsConserve and protect wildlife and fish species and their habitatsReduce or eliminate the threat of invasive species and wildlife diseaseThis report provides abstracts of the majority of ongoing research investigations of the USGS Cooperative Fish and Wildlife Research Units program and is intended to complement the 2016 Cooperative Research Units Program Year in Review Circular 1424 (https://doi.org/10.3133/cir1424). The report is organized by the following major science themes that contribute to the objectives of the USGS:Advanced TechnologiesClimate ScienceDecision ScienceEcological FlowsEcosystem ServicesEndangered Species Conservation, Recovery, and Proactive StrategiesEnergyHuman DimensionsInvasive SpeciesLandscape EcologySpecies of Greatest Conservation NeedSpecies Population, Habitat, and Harvest ManagementWildlife Health and Disease

  19. Prevalence and cost of full-time research fellowships during general surgery residency: a national survey.

    Science.gov (United States)

    Robertson, Charles M; Klingensmith, Mary E; Coopersmith, Craig M

    2009-01-01

    To quantify the prevalence, outcomes, and cost of surgical resident research. General surgery is unique among graduate medical education programs because a large percentage of residents interrupt their clinical training to spend 1 to 3 years performing full-time research. No comprehensive data exists on the scope of this practice. Survey sent to all 239 program directors of general surgery residencies participating in the National Resident Matching Program. Response rate was 200 of 239 (84%). A total of 381 of 1052 trainees (36%) interrupt residency to pursue full-time research. The mean research fellowship length is 1.7 years, with 72% of trainees performing basic science research. A significant association was found between fellowship length and postresidency activity, with a 14.7% increase in clinical fellowship training and a 15.2% decrease in private practice positions for each year of full-time research (P < 0.0001). Program directors at 31% of programs reported increased clinical duties for research fellows as a result of Accreditation Council for Graduate Medical Education work hour regulations for clinical residents, whereas a further 10% of programs are currently considering such changes. It costs $41.5 million to pay the 634 trainees who perform research fellowships each year, the majority of which is paid for by departmental funds (40%) and institutional training grants (24%). Interrupting residency to perform a research fellowship is a common and costly practice among general surgery residents. Although performing a research fellowship is associated with clinical fellowship training after residency, it is unclear to what extent this practice leads to the development of surgical investigators after postgraduate training.

  20. Tendency of lubricating oil manufacturing process

    Energy Technology Data Exchange (ETDEWEB)

    Seki, Toshio

    1988-09-30

    The manufacturing method of paraffin base oil and the tendency are explained in details. The base oil is distillate of petroleum which is obtained at the high boiling of 400/degree/C or higher. The base oil is made from the distillate which is obtained through solvent deasphalting of the vacuum distillated residual oil. The refining process of those material is classified into the two different process steps such as refining and modifying process step in which the quality of the material is improved while eliminating unstable resin, aromatic compound, and sulfur contained in the material, and dewaxing process step in which the wax contained in the material is removed. The former is combination of the two different process steps such as solvent extraction process and hydrogen finishing process or hydroforming process. The latter is a combination of the two different process steps such as solvent dewaxing and catalytic dewaxing (hydro-dewaxing). Various examples of reactions, features and industrial processes are given in accordance with each of these process steps. Regarding the tendency toward the future, the kinds of materials will be expanded in the way that naphthene base oil will adopted as the material oil along with diversification of the quality of lubricating oil, and the processing technology including two-stage processing, catalytic dewaxing, etc. will be expected to be improved. 18 references, 11 figures, 7 tables.

  1. Attitudes toward medical and genetic confidentiality in the Saudi research biobank: An exploratory survey.

    Science.gov (United States)

    Alahmad, Ghiath; Hifnawy, Tamer; Abbasi, Badaruddin; Dierickx, Kris

    2016-03-01

    Achieving a balance between giving access to information and respecting donors' confidentiality is a crucial issue for any biobank, with its large number of samples and associated information. Despite the existence of much empirical literature on confidentiality, there are too few surveys in the Middle East about the topic, particularly in the Saudi context. A survey was conducted of 200 respondents at King Abdulaziz Medical City in Riyadh, Saudi Arabia, among 5 groups of equal size, comprised of researchers, physicians, medical students, donors and laypersons, respectively. The majority of participants agreed that confidentiality is an important issue and that it is well protected in the Saudi biobank. All 5 groups showed different attitudes toward disclosing information to various third parties. They were in favor of allowing treating physicians, and to a certain extent family members, to have access to medical and genetic results from research. No significant differences were found between views on medical and genetic confidentiality. The majority of respondents agreed that confidentiality might be breached in cases with specific justified reasons. Even considering differences in religion, culture and other factors, the results of the study were consistent with those reported in the literature and research conducted in other countries. We therefore place emphasis on the importance of protecting and promoting patient/donor confidentiality and privacy. Copyright © 2016. Published by Elsevier Ireland Ltd.

  2. Conducting health survey research in a deep rural South African community: challenges and adaptive strategies.

    Science.gov (United States)

    Casale, Marisa; Lane, Tyler; Sello, Lebo; Kuo, Caroline; Cluver, Lucie

    2013-04-24

    In many parts of the developing world, rural health requires focused policy attention, informed by reliable, representative health data. Yet there is surprisingly little published material to guide health researchers who face the unique set of hurdles associated with conducting field research in remote rural areas. In this paper we provide a detailed description of the key challenges encountered during health survey field research carried out in 2010 in a deep rural site in KwaZulu-Natal, South Africa. The aim of the field research was to collect data on the health of children aged 10 to 17 years old, and their primary adult caregivers, as part of a larger national health survey; the research was a collaboration between several South African and foreign universities, South African national government departments, and various NGO partners. In presenting each of the four fieldwork challenges encountered on this site, we describe the initial planning decisions made, the difficulties faced when implementing these in the field, and the adaptive strategies we used to respond to these challenges. We reflect on learnings of potential relevance for the research community. Our four key fieldwork challenges were scarce research capacity, staff relocation tensions, logistical constraints, and difficulties related to community buy-in. Addressing each of these obstacles required timely assessment of the situation and adaptation of field plans, in collaboration with our local NGO partner. Adaptive strategies included a greater use of local knowledge; the adoption of tribal authority boundaries as the smallest geopolitical units for sampling; a creative developmental approach to capacity building; and planned, on-going engagement with multiple community representatives. We argue that in order to maintain high scientific standards of research and manage to 'get the job done' on the ground, it is necessary to respond to fieldwork challenges that arise as a cohesive team, with timely

  3. Open Data in Global Environmental Research: The Belmont Forum’s Open Data Survey

    Science.gov (United States)

    Schmidt, Birgit; Gemeinholzer, Birgit; Treloar, Andrew

    2016-01-01

    This paper presents the findings of the Belmont Forum’s survey on Open Data which targeted the global environmental research and data infrastructure community. It highlights users’ perceptions of the term “open data”, expectations of infrastructure functionalities, and barriers and enablers for the sharing of data. A wide range of good practice examples was pointed out by the respondents which demonstrates a substantial uptake of data sharing through e-infrastructures and a further need for enhancement and consolidation. Among all policy responses, funder policies seem to be the most important motivator. This supports the conclusion that stronger mandates will strengthen the case for data sharing. PMID:26771577

  4. Developing the Librarians' Role in Supporting Grant Applications and Reducing Waste in Research: Outcomes from a Literature Review and Survey in the NIHR Research Design Service

    Science.gov (United States)

    Edmunds Otter, Mary L.; Wright, Judy M.; King, Natalie V.

    2017-01-01

    Librarians and information specialists' involvement during the development of grant applications for external funding can save researchers' time, provide specialist support, and contribute to reducing avoidable waste in research. This article presents a survey of information specialists working for the National Institute for Health Research's…

  5. Common definition for categories of clinical research: a prerequisite for a survey on regulatory requirements by the European Clinical Research Infrastructures Network (ECRIN)

    DEFF Research Database (Denmark)

    Kubiak, Christine; de Andres-Trelles, Fernando; Kuchinke, Wolfgang

    2009-01-01

    in relation to the wide spectrum of clinical research, the European Clinical Research Infrastructures Network (ECRIN) developed a multinational survey in ten European countries. However a lack of common classification framework for major categories of clinical research was identified, and therefore reaching...... with cell therapy, etc.); diagnostic studies; clinical research on nutrition; other interventional clinical research (including trials in complementary and alternative medicine, trials with collection of blood or tissue samples, physiology studies, etc.); and epidemiology studies. Our classification...

  6. Research on 3-D terrain correction methods of airborne gamma-ray spectrometry survey

    International Nuclear Information System (INIS)

    Liu Yanyang; Liu Qingcheng; Zhang Zhiyong

    2008-01-01

    The general method of height correction is not effectual in complex terrain during the process of explaining airborne gamma-ray spectrometry data, and the 2-D terrain correction method researched in recent years is just available for correction of section measured. A new method of 3-D sector terrain correction is studied. The ground radiator is divided into many small sector radiators by the method, then the irradiation rate is calculated in certain survey distance, and the total value of all small radiate sources is regarded as the irradiation rate of the ground radiator at certain point of aero- survey, and the correction coefficients of every point are calculated which then applied to correct to airborne gamma-ray spectrometry data. The method can achieve the forward calculation, inversion calculation and terrain correction for airborne gamma-ray spectrometry survey in complex topography by dividing the ground radiator into many small sectors. Other factors are considered such as the un- saturated degree of measure scope, uneven-radiator content on ground, and so on. The results of for- ward model and an example analysis show that the 3-D terrain correction method is proper and effectual. (authors)

  7. Using a web-based survey tool to undertake a Delphi study: application for nurse education research.

    Science.gov (United States)

    Gill, Fenella J; Leslie, Gavin D; Grech, Carol; Latour, Jos M

    2013-11-01

    The Internet is increasingly being used as a data collection medium to access research participants. This paper reports on the experience and value of using web-survey software to conduct an eDelphi study to develop Australian critical care course graduate practice standards. The eDelphi technique used involved the iterative process of administering three rounds of surveys to a national expert panel. The survey was developed online using SurveyMonkey. Panel members responded to statements using one rating scale for round one and two scales for rounds two and three. Text boxes for panel comments were provided. For each round, the SurveyMonkey's email tool was used to distribute an individualized email invitation containing the survey web link. The distribution of panel responses, individual responses and a summary of comments were emailed to panel members. Stacked bar charts representing the distribution of responses were generated using the SurveyMonkey software. Panel response rates remained greater than 85% over all rounds. An online survey provided numerous advantages over traditional survey approaches including high quality data collection, ease and speed of survey administration, direct communication with the panel and rapid collation of feedback allowing data collection to be undertaken in 12 weeks. Only minor challenges were experienced using the technology. Ethical issues, specific to using the Internet to conduct research and external hosting of web-based software, lacked formal guidance. High response rates and an increased level of data quality were achieved in this study using web-survey software and the process was efficient and user-friendly. However, when considering online survey software, it is important to match the research design with the computer capabilities of participants and recognize that ethical review guidelines and processes have not yet kept pace with online research practices. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Research priorities in health communication and participation: international survey of consumers and other stakeholders.

    Science.gov (United States)

    Synnot, Anneliese; Bragge, Peter; Lowe, Dianne; Nunn, Jack S; O'Sullivan, Molly; Horvat, Lidia; Tong, Allison; Kay, Debra; Ghersi, Davina; McDonald, Steve; Poole, Naomi; Bourke, Noni; Lannin, Natasha; Vadasz, Danny; Oliver, Sandy; Carey, Karen; Hill, Sophie J

    2018-05-08

    To identify research priorities of consumers and other stakeholders to inform Cochrane Reviews in 'health communication and participation' (including such concepts as patient experience, shared decision-making and health literacy). International. We included anyone with an interest in health communication and participation. Up to 151 participants (18-80 years; 117 female) across 12 countries took part, including 48 consumers (patients, carers, consumer representatives) and 75 professionals (health professionals, policymakers, researchers) (plus 25 people who identified as both). Survey. We invited people to submit their research ideas via an online survey open for 4 weeks. Using inductive thematic analysis, we generated priority research topics, then classified these into broader themes. Participants submitted 200 research ideas, which we grouped into 21 priority topics. Key research priorities included: insufficient consumer involvement in research (19 responses), 'official' health information is contradictory and hard to understand (18 responses), communication/coordination breakdowns in health services (15 responses), health information provision a low priority for health professionals (15 responses), insufficient eliciting of patient preferences (14 responses), health services poorly understand/implement patient-centred care (14 responses), lack of holistic care impacting healthcare quality and safety (13 responses) and inadequate consumer involvement in service design (11 responses). These priorities encompassed acute and community health settings, with implications for policy and research. Priority populations of interest included people from diverse cultural and linguistic backgrounds, carers, and people with low educational attainment, or mental illness. Most frequently suggested interventions focused on training and cultural change activities for health services and health professionals. Consumers and other stakeholders want research addressing

  9. Influence of Workpiece Surface Topography on the Mechanisms of Liquid Lubrication in Strip Drawing

    DEFF Research Database (Denmark)

    Shimizu, I; Andreasen, Jan Lasson; Bech, Jakob Ilsted

    2001-01-01

    The workpiece surface topography is an important factor controlling the mechanisms of lubrication in metal forming processes. In the present work, the microscopic lubrication mechanisms induced by lubricant trapped in pockets of the surface in strip drawing are studied. The experiments are perfor......The workpiece surface topography is an important factor controlling the mechanisms of lubrication in metal forming processes. In the present work, the microscopic lubrication mechanisms induced by lubricant trapped in pockets of the surface in strip drawing are studied. The experiments...

  10. Tribology and energy efficiency: from molecules to lubricated contacts to complete machines.

    Science.gov (United States)

    Taylor, Robert Ian

    2012-01-01

    The impact of lubricants on energy efficiency is considered. Molecular details of base oils used in lubricants can have a great impact on the lubricant's physical properties which will affect the energy efficiency performance of a lubricant. In addition, molecular details of lubricant additives can result in significant differences in measured friction coefficients for machine elements operating in the mixed/boundary lubrication regime. In single machine elements, these differences will result in lower friction losses, and for complete systems (such as cars, trucks, hydraulic circuits, industrial gearboxes etc.) lower fuel consumption or lower electricity consumption can result.

  11. Method to improve lubricity of low-sulfur diesel and gasoline fuels

    Science.gov (United States)

    Erdemir, Ali

    2004-08-31

    A method for providing lubricity in fuels and lubricants includes adding a boron compound to a fuel or lubricant to provide a boron-containing fuel or lubricant. The fuel or lubricant may contain a boron compound at a concentration between about 30 ppm and about 3,000 ppm and a sulfur concentration of less than about 500 ppm. A method of powering an engine to minimize wear, by burning a fuel containing boron compounds. The boron compounds include compound that provide boric acid and/or BO.sub.3 ions or monomers to the fuel or lubricant.

  12. Hybrid Gear Performance Under Loss-of-Lubrication Conditions

    Science.gov (United States)

    Laberge, Kelsen E.; Berkebile, Stephen P.; Handschuh, Robert F.; Roberts, Gary D.

    2017-01-01

    Hybrid composite gear technology is being investigated to increase power density in rotorcraft drive systems. These gears differ from conventional steel gears in that the structural web material is replaced with a lightweight carbon fiber composite. Past studies have focused on performance of this technology under normal operating conditions, however, for this technology to be viable it must also withstand adverse conditions. The study presented here evaluates the performance of hybrid gears under loss-of-lubrication conditions in NASA Glenn Research Centers Contact Fatigue Test Facility. Two experiments are presented using small-scale 3.5 inch (8.9 cm) pitch diameter hybrid gears and compared to a baseline steel gear pair. Results of these tests show that there are limitations to the use of a hexagonal interlock pattern between the steel and composite. There is also evidence that the presence of polymer in the gear during an oil out event has a potential to increase time to failure. Further studies are planned to expand on these initial findings.

  13. E-survey with researchers, members of ethics committees and sponsors of clinical research in Brazil: an emerging methodology for scientific research.

    Science.gov (United States)

    Dainesi, Sonia Mansoldo; Goldbaum, Moisés

    2012-12-01

    The growth of Internet users enables epidemiological studies to be conducted electronically, representing a promising methodology for data collection. Members of Ethics Committees, Clinical Researchers and Sponsors were interviewed using questionnaires sent over the Internet. Along with the questionnaire, participants received a message explaining the survey and also the informed consent. Returning the questionnaire meant the consent of the participant was given. No incentive was offered; two reminders were sent. The response rate was 21% (124/599), 20% (58/290) and 45% (24/53) respectively for Ethics Committees, Researchers and Sponsors. The percentage of return before the two reminders was about 62%. Reasons for non-response: participant not found, refusal to participate, lack of experience in clinical research or in the therapeutic field. Characteristics of participants: 45% of Ethics Committee participants, 64% of Researchers and 63% of Sponsors were male; mean age (range), respectively: 47 (28-74), 53 (24-72) and 40 (29-65) years. Among Researchers and Sponsors, all respondents had at least a university degree and, in the Ethics Committees group, only two (1.7%) did not have one. Most of the questionnaires in all groups came from the Southeast Region of Brazil, probably reflecting the highest number of clinical trials and research professionals in this region. Despite the potential limitations of a survey done through the Internet, this study led to a response rate similar to what has been observed with other models, efficiency in obtaining responses (speed and quality), convenience for respondents and low cost.

  14. On the application of reynolds theory to thermo-piezo-viscous lubrication in oil hydraulics

    DEFF Research Database (Denmark)

    Johansen, Per; Roemer, Daniel Beck; Andersen, Torben O.

    2015-01-01

    The efficiency of fluid power motors and pumps is a subject to research, which has generated numerous publications during the last three decades. The main incentives for this research are optimization of reliability and efficiency through the study of loss and wear mechanisms, which are very....... In this paper the derivation of Reynolds equation from the continuum assumption is reviewed and it is shown that the validity of Reynolds theory based pressure field solutions in oil hydraulic thermo-piezo-viscous lubrication models are subject to maximum bounds on the pressure and temperature field gradients...

  15. The use of U.S. Geological Survey digital geospatial data products for science research

    Science.gov (United States)

    Varanka, Dalia E.; Deering, Carol; Caro, Holly

    2012-01-01

    The development of geographic information system (GIS) transformed the practice of geographic science research. The availability of low-cost, reliable data by the U.S. Geological Survey (USGS) supported the advance of GIS in the early stages of the transition to digital technology. To estimate the extent of the scientific use of USGS digital geospatial data products, a search of science literature databases yielded numbers of articles citing USGS products. Though this method requires careful consideration to avoid false positives, these citation numbers of three types of products (vector, land-use/land-cover, and elevation data) were graphed, and the frequency trends were examined. Trends indicated that the use of several, but not all, products increased with time. The use of some products declined and reasons for these declines are offered. To better understand how these data affected the design and outcomes of research projects, the study begins to build a context for the data by discussing digital cartographic research preceding the production of mass-produced products. The data distribution methods used various media for different system types and were supported by instructional material. The findings are an initial assessment of the affect of USGS products on GIS-enabled science research. A brief examination of the specific papers indicates that USGS data were used for science and GIS conceptual research, advanced education, and problem analysis and solution applications.

  16. A Method for Recruiting Participants from Isolated Islands of Small Island Developing States (SIDS) for Survey Research

    Science.gov (United States)

    Moosa, Sheena; Koopman-Boyden, Peggy

    2016-01-01

    Representing isolated small island communities through social survey research continues to be challenging. We examine a locally developed method to reach and recruit older people (65+ years) for a survey on well-being in the small island developing state of Maldives. The use of messengers to recruit participants is examined in the context of these…

  17. Delirium diagnosis methodology used in research: a survey-based study.

    Science.gov (United States)

    Neufeld, Karin J; Nelliot, Archana; Inouye, Sharon K; Ely, E Wesley; Bienvenu, O Joseph; Lee, Hochang Benjamin; Needham, Dale M

    2014-12-01

    To describe methodology used to diagnose delirium in research studies evaluating delirium detection tools. The authors used a survey to address reference rater methodology for delirium diagnosis, including rater characteristics, sources of patient information, and diagnostic process, completed via web or telephone interview according to respondent preference. Participants were authors of 39 studies included in three recent systematic reviews of delirium detection instruments in hospitalized patients. Authors from 85% (N = 33) of the 39 eligible studies responded to the survey. The median number of raters per study was 2.5 (interquartile range: 2-3); 79% were physicians. The raters' median duration of clinical experience with delirium diagnosis was 7 years (interquartile range: 4-10), with 5% having no prior clinical experience. Inter-rater reliability was evaluated in 70% of studies. Cognitive tests and delirium detection tools were used in the delirium reference rating process in 61% (N = 21) and 45% (N = 15) of studies, respectively, with 33% (N = 11) using both and 27% (N = 9) using neither. When patients were too drowsy or declined to participate in delirium evaluation, 70% of studies (N = 23) used all available information for delirium diagnosis, whereas 15% excluded such patients. Significant variability exists in reference standard methods for delirium diagnosis in published research. Increasing standardization by documenting inter-rater reliability, using standardized cognitive and delirium detection tools, incorporating diagnostic expert consensus panels, and using all available information in patients declining or unable to participate with formal testing may help advance delirium research by increasing consistency of case detection and improving generalizability of research results. Copyright © 2014 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

  18. OAPS’ ACTIVITY IN THE LABOUR MARKET IN THE CONTEXT OF SURVEY RESEARCH

    Directory of Open Access Journals (Sweden)

    Władysława Łuczka-Bakuła

    2013-12-01

    Full Text Available A great deal of attention has been paid in recent years not merely to young people’s activity in the labour market, but also to the vocational involvement of elderly people. The traditional attitude towards the contemporary labour market results from the social and economic transformation, but also demographic changes and, the process of population ageing. It is thus a vital issue. A growing number of elderly people contributes to the increase in the number of beneficiaries, which is reflected in lower labour force participation and, consequently, may lead to a deterioration of production capacity of economy. On the one hand, higher pensions may be viewed as higher incomes of pensioners, but on the other hand, they constitute an extra burden for public expenses. Conversely, lower pensions may not merely result in increased activity in the labour market and higher incomes, but also be linked with an increase in social welfare expenditure. The article discusses the results of survey research conducted between 2009 and 2010 in a group of pensioners. The research shows that over a half of the surveyed OAPs were active in the labour market and their activity was mainly induced by their financial situation. 

  19. Aerial radiological survey of the United States Department of Energy's Sandia National Laboratories and Inhalation Toxicology Research Institute, Albuquerque, New Mexico. Date of survey: April 1981

    International Nuclear Information System (INIS)

    Boyns, P.K.

    1982-05-01

    An aerial radiological survey of the Sandia National Laboratories (SNLA) and the Inhalation Toxicology Research Institute (ITRI) was carried out in April 1981 by EG and G, Inc. for the United States Department of Energy. The survey consisted of an airborne measurement of both natural and man-made gamma radiation from the terrain surface in and around the SNLA and ITRI site. These measurements allowed a determination of the surface terrestrial spatial distribution of isotope concentrations. Results are reported as exposure rates and man-made isopleths and are superimposed on 240 m/cm scale map of the area. Gamma ray energy spectra are also presented for the net man-made radioelements. Several areas of man-made activity were detected in the SNLA and ITRI survey. These areas were associated with normal operations at the SNLA, ITRI and Kirtland Air Force Base. The presence of 241 Am was not detected in any of the areas surveyed

  20. Development of a Survey Instrument to Measure TEFL Academics' Perceptions about, Individual and Workplace Characteristics for Conducting Research

    Science.gov (United States)

    Bai, Li; Hudson, Peter; Millwater, Jan; Tones, Megan

    2013-01-01

    A 30-item survey was devised to determine Chinese TEFL (Teaching English as a Foreign Language) academics' potential for conducting research. A five-part Likert scale was used to gather data from 182 academics on four factors: (1) perceptions on teaching-research nexus, (2) personal perspectives for conducting research, (3) predispositions for…