Strategies to fight low-cost rivals.

Science.gov (United States)

Kumar, Nirmalya

2006-12-01

Companies find it challenging and yet strangely reassuring to take on opponents whose strategies, strengths, and weaknesses resemble their own. Their obsession with familiar rivals, however, has blinded them to threats from disruptive, low-cost competitors. Successful price warriors, such as the German retailer Aldi, are changing the nature of competition by employing several tactics: focusing on just one or a few consumer segments, delivering the basic product or providing one benefit better than rivals do, and backing low prices with superefficient operations. Ignoring cutprice rivals is a mistake because they eventually force companies to vacate entire market segments. Price wars are not the answer, either: Slashing prices usually lowers profits for incumbents without driving the low-cost entrants out of business. Companies take various approaches to competing against cut-price players. Some differentiate their products--a strategy that works only in certain circumstances. Others launch low-cost businesses of their own, as many airlines did in the 1990s--a so-called dual strategy that succeeds only if companies can generate synergies between the existing businesses and the new ventures, as the financial service providers HSBC and ING did. Without synergies, corporations are better off trying to transform themselves into low-cost players, a difficult feat that Ryanair accomplished in the 1990s, or into solution providers. There will always be room for both low-cost and value-added players. How much room each will have depends not only on the industry and customers' preferences, but also on the strategies traditional businesses deploy.

Cost awareness among healthcare professionals at a South African ...

African Journals Online (AJOL)

[9,10] A survey of internal medicine ... the brain. Participants also indicated that they would like to improve their cost information knowledge. ... The use of percentage deviation from true cost as a method of assessing cost awareness creates a ...

Cost-effective handoff scheme based on mobility-aware dual pointer forwarding in proxy mobile IPv6 networks.

Science.gov (United States)

Son, Seungsik; Jeong, Jongpil

2014-01-01

In this paper, a mobility-aware Dual Pointer Forwarding scheme (mDPF) is applied in Proxy Mobile IPv6 (PMIPv6) networks. The movement of a Mobile Node (MN) is classified as intra-domain and inter-domain handoff. When the MN moves, this scheme can reduce the high signaling overhead for intra-handoff/inter-handoff, because the Local Mobility Anchor (LMA) and Mobile Access Gateway (MAG) are connected by pointer chains. In other words, a handoff is aware of low mobility between the previously attached MAG (pMAG) and newly attached MAG (nMAG), and another handoff between the previously attached LMA (pLMA) and newly attached LMA (nLMA) is aware of high mobility. Based on these mobility-aware binding updates, the overhead of the packet delivery can be reduced. Also, we analyse the binding update cost and packet delivery cost for route optimization, based on the mathematical analytic model. Analytical results show that our mDPF outperforms the PMIPv6 and the other pointer forwarding schemes, in terms of reducing the total cost of signaling.

End-user perspective of low-cost sensors for outdoor air pollution monitoring

OpenAIRE

Rai, Aakash C.; Kumar, Prashant; Pilla, Francesco; Skouloudis, Andreas N.; Di Sabatino, Silvana; Ratti, Carlo; Yasar, Ansar; Rickerby, David

2017-01-01

Low-cost sensor technology can potentially revolutionise the area of air pollution monitoring by providing high-density spatiotemporal pollution data. Such data can be utilised for supplementing traditional pollution monitoring, improving exposure estimates, and raising community awareness about air pollution. However, data quality remains a major concern that hinders the widespread adoption of low-cost sensor technology. Unreliable data may mislead unsuspecting users and potentially lead to ...

Developing an Onboard Traffic-Aware Flight Optimization Capability for Near-Term Low-Cost Implementation

Science.gov (United States)

Wing, David J.; Ballin, Mark G.; Koczo, Stefan, Jr.; Vivona, Robert A.; Henderson, Jeffrey M.

2013-01-01

The concept of Traffic Aware Strategic Aircrew Requests (TASAR) combines Automatic Dependent Surveillance Broadcast (ADS-B) IN and airborne automation to enable user-optimal in-flight trajectory replanning and to increase the likelihood of Air Traffic Control (ATC) approval for the resulting trajectory change request. TASAR is designed as a near-term application to improve flight efficiency or other user-desired attributes of the flight while not impacting and potentially benefiting ATC. Previous work has indicated the potential for significant benefits for each TASAR-equipped aircraft. This paper will discuss the approach to minimizing TASAR's cost for implementation and accelerating readiness for near-term implementation.

A Methodology to Integrate Security and Cost-effectiveness in ATM

OpenAIRE

Matarese, Francesca; Montefusco, Patrizia; Neves, José; Rocha, André

2014-01-01

The objective of this paper is the definition of a new methodology for carrying out security risk assessment in the air traffic management (ATM) domain so as to enhance security awareness and integrate secure and cost-effective design objectives. This process is carried out by modelling the system, identifying the assets, threats and vulnerabilities, prioritizing the threats and proposing cost-effective countermeasures for the weaknesses found. ATM security is concerned with securing ATM a...

Low Cost Night Vision System for Intruder Detection

Science.gov (United States)

Ng, Liang S.; Yusoff, Wan Azhar Wan; R, Dhinesh; Sak, J. S.

2016-02-01

The growth in production of Android devices has resulted in greater functionalities as well as lower costs. This has made previously more expensive systems such as night vision affordable for more businesses and end users. We designed and implemented robust and low cost night vision systems based on red-green-blue (RGB) colour histogram for a static camera as well as a camera on an unmanned aerial vehicle (UAV), using OpenCV library on Intel compatible notebook computers, running Ubuntu Linux operating system, with less than 8GB of RAM. They were tested against human intruders under low light conditions (indoor, outdoor, night time) and were shown to have successfully detected the intruders.

Al-Qaida threats and strategies : the religious justification for targeting the international energy economy

Energy Technology Data Exchange (ETDEWEB)

Williams, J.F.

2008-03-15

Methods of analyzing threats generated by terrorists against the energy industry were discussed. Threat was defined as the product of an adversary's capability, intent, and authority to engage a target using a specific attack mode. The paper argued that robust models for threat must demonstrate a cultural awareness of the adversary in question. The study used an al-Qaida attack to develop and critique the religious justification offered by Salafi-Jihadi religious scholars for attacking the energy industry. The importance of the fatawa's religious authority was evaluated, and cultural drivers for al-Qaida were explored in relation to the threat model. An assessment of past terrorist acts against energy industry infrastructure was conducted. Various relevant fatawa issued by religious scholars were discussed. Socio-political and religious attributes of the al-Qaida movement were outlined using the Combating Terrorism Center's militant ideology atlas. The threat equation was expanded to include authority and cultural influences. The threat model was developed by assigning information to bins of capability, intent, and authority in order to assess and evaluate data. The Kalman filter technique was used to determine threat drivers. 98 refs., 20 figs.

Low-cost ultra-wide genotyping using Roche/454 pyrosequencing for surveillance of HIV drug resistance.

Directory of Open Access Journals (Sweden)

Dawn M Dudley

Full Text Available Great efforts have been made to increase accessibility of HIV antiretroviral therapy (ART in low and middle-income countries. The threat of wide-scale emergence of drug resistance could severely hamper ART scale-up efforts. Population-based surveillance of transmitted HIV drug resistance ensures the use of appropriate first-line regimens to maximize efficacy of ART programs where drug options are limited. However, traditional HIV genotyping is extremely expensive, providing a cost barrier to wide-scale and frequent HIV drug resistance surveillance.We have developed a low-cost laboratory-scale next-generation sequencing-based genotyping method to monitor drug resistance. We designed primers specifically to amplify protease and reverse transcriptase from Brazilian HIV subtypes and developed a multiplexing scheme using multiplex identifier tags to minimize cost while providing more robust data than traditional genotyping techniques. Using this approach, we characterized drug resistance from plasma in 81 HIV infected individuals collected in São Paulo, Brazil. We describe the complexities of analyzing next-generation sequencing data and present a simplified open-source workflow to analyze drug resistance data. From this data, we identified drug resistance mutations in 20% of treatment naïve individuals in our cohort, which is similar to frequencies identified using traditional genotyping in Brazilian patient samples.The developed ultra-wide sequencing approach described here allows multiplexing of at least 48 patient samples per sequencing run, 4 times more than the current genotyping method. This method is also 4-fold more sensitive (5% minimal detection frequency vs. 20% at a cost 3-5× less than the traditional Sanger-based genotyping method. Lastly, by using a benchtop next-generation sequencer (Roche/454 GS Junior, this approach can be more easily implemented in low-resource settings. This data provides proof-of-concept that next

Sliver Solar Cells: High-Efficiency, Low-Cost PV Technology

Directory of Open Access Journals (Sweden)

Evan Franklin

2007-01-01

Full Text Available Sliver cells are thin, single-crystal silicon solar cells fabricated using standard fabrication technology. Sliver modules, composed of several thousand individual Sliver cells, can be efficient, low-cost, bifacial, transparent, flexible, shadow tolerant, and lightweight. Compared with current PV technology, mature Sliver technology will need 10% of the pure silicon and fewer than 5% of the wafer starts per MW of factory output. This paper deals with two distinct challenges related to Sliver cell and Sliver module production: providing a mature and robust Sliver cell fabrication method which produces a high yield of highly efficient Sliver cells, and which is suitable for transfer to industry; and, handling, electrically interconnecting, and encapsulating billions of sliver cells at low cost. Sliver cells with efficiencies of 20% have been fabricated at ANU using a reliable, optimised processing sequence, while low-cost encapsulation methods have been demonstrated using a submodule technique.

Robust Spectrum Sensing Demonstration Using a Low-Cost Front-End Receiver

Directory of Open Access Journals (Sweden)

Daniele Borio

2015-01-01

Full Text Available Spectrum Sensing (SS is an important function in Cognitive Radio (CR to detect primary users. The design of SS algorithms is one of the most challenging tasks in CR and requires innovative hardware and software solutions to enhance detection probability and minimize low false alarm probability. Although several SS algorithms have been developed in the specialized literature, limited work has been done to practically demonstrate the feasibility of this function on platforms with significant computational and hardware constraints. In this paper, SS is demonstrated using a low cost TV tuner as agile front-end for sensing a large portion of the Ultra-High Frequency (UHF spectrum. The problems encountered and the limitations imposed by the front-end are analysed along with the solutions adopted. Finally, the spectrum sensor developed is implemented on an Android device and SS implementation is demonstrated using a smartphone.

Addressing Stereotype Threat is Critical to Diversity and Inclusion in Organizational Psychology

Directory of Open Access Journals (Sweden)

Bettina J Casad

2016-01-01

Full Text Available Recently researchers have debated the relevance of stereotype threat to the workplace. Critics have argued that stereotype threat is not relevant in high stakes testing such as in personnel selection. We and others argue that stereotype threat is highly relevant in personnel selection, but our review focused on underexplored areas including effects of stereotype threat beyond test performance and the application of brief, low-cost interventions in the workplace. Relevant to the workplace, stereotype threat can reduce domain identification, job engagement, career aspirations, and receptivity to feedback. Stereotype threat has consequences in other relevant domains including leadership, entrepreneurship, negotiations, and competitiveness. Several institutional and individual level intervention strategies that have been field-tested and are easy to implement show promise for practitioners including: addressing environmental cues, valuing diversity, wise feedback, organizational mindsets, reattribution training, reframing the task, values-affirmation, utility-value, belonging, communal goal affordances, interdependent worldviews, and teaching about stereotype threat. This review integrates criticisms and evidence into one accessible source for practitioners and provides recommendations for implementing effective, low-cost interventions in the workplace.

Addressing Stereotype Threat is Critical to Diversity and Inclusion in Organizational Psychology

Science.gov (United States)

Casad, Bettina J.; Bryant, William J.

2016-01-01

Recently researchers have debated the relevance of stereotype threat to the workplace. Critics have argued that stereotype threat is not relevant in high stakes testing such as in personnel selection. We and others argue that stereotype threat is highly relevant in personnel selection, but our review focused on underexplored areas including effects of stereotype threat beyond test performance and the application of brief, low-cost interventions in the workplace. Relevant to the workplace, stereotype threat can reduce domain identification, job engagement, career aspirations, and receptivity to feedback. Stereotype threat has consequences in other relevant domains including leadership, entrepreneurship, negotiations, and competitiveness. Several institutional and individual level intervention strategies that have been field-tested and are easy to implement show promise for practitioners including: addressing environmental cues, valuing diversity, wise feedback, organizational mindsets, reattribution training, reframing the task, values-affirmation, utility-value, belonging, communal goal affordances, interdependent worldviews, and teaching about stereotype threat. This review integrates criticisms and evidence into one accessible source for practitioners and provides recommendations for implementing effective, low-cost interventions in the workplace. PMID:26834681

Addressing Stereotype Threat is Critical to Diversity and Inclusion in Organizational Psychology.

Science.gov (United States)

Casad, Bettina J; Bryant, William J

2016-01-01

Recently researchers have debated the relevance of stereotype threat to the workplace. Critics have argued that stereotype threat is not relevant in high stakes testing such as in personnel selection. We and others argue that stereotype threat is highly relevant in personnel selection, but our review focused on underexplored areas including effects of stereotype threat beyond test performance and the application of brief, low-cost interventions in the workplace. Relevant to the workplace, stereotype threat can reduce domain identification, job engagement, career aspirations, and receptivity to feedback. Stereotype threat has consequences in other relevant domains including leadership, entrepreneurship, negotiations, and competitiveness. Several institutional and individual level intervention strategies that have been field-tested and are easy to implement show promise for practitioners including: addressing environmental cues, valuing diversity, wise feedback, organizational mindsets, reattribution training, reframing the task, values-affirmation, utility-value, belonging, communal goal affordances, interdependent worldviews, and teaching about stereotype threat. This review integrates criticisms and evidence into one accessible source for practitioners and provides recommendations for implementing effective, low-cost interventions in the workplace.

Robust Wafer-Level Thin-Film Encapsulation (Packaging) of Microstructures (MEMS) using Low Stress PECVD Silicon Carbide

NARCIS (Netherlands)

Rajaraman, V.; Pakula, L.S.; Pham, H.T.M.; Sarro, P.M.; French, P.J.

2009-01-01

This paper presents a new low-cost, CMOS-compatible and robust wafer-level encapsulation technique developed using a stress-optimised PECVD SiC as the capping and sealing material, imparting harsh environment capability. This technique has been applied for the fabrication and encapsulation of a wide

Ignoring the sacroiliac joint in chronic low back pain is costly

Directory of Open Access Journals (Sweden)

Polly DW

2016-01-01

Full Text Available David W Polly,1,2 Daniel Cher3 1Department of Orthopedic Surgery, 2Department of Neurosurgery, University of Minnesota, Minneapolis, MN, 3SI-BONE, Inc., San Jose, CA, USA Background: Increasing evidence supports minimally invasive sacroiliac joint (SIJ fusion as a safe and effective treatment for SIJ dysfunction. Failure to include the SIJ in the diagnostic evaluation of low back pain could result in unnecessary health care expenses. Design: Decision analytic cost model. Methods: A decision analytic model calculating 2-year direct health care costs in patients with chronic low back pain considering lumbar fusion surgery was used. Results: The strategy of including the SIJ in the preoperative diagnostic workup of chronic low back pain saves an expected US$3,100 per patient over 2 years. Cost savings were robust to reasonable ranges for costs and probabilities, such as the probability of diagnosis and the probability of successful surgical treatment. Conclusion: Including the SIJ as part of the diagnostic strategy in preoperative patients with chronic low back pain is likely to be cost saving in the short term. Keywords: chronic low back pain, lumbar fusion, sacroiliac joint pain, sacroiliac joint fusion, healthcare costs, decision modeling

Low-cost asset tracking using location-aware camera phones

Science.gov (United States)

Chen, David; Tsai, Sam; Kim, Kyu-Han; Hsu, Cheng-Hsin; Singh, Jatinder Pal; Girod, Bernd

2010-08-01

Maintaining an accurate and up-to-date inventory of one's assets is a labor-intensive, tedious, and costly operation. To ease this difficult but important task, we design and implement a mobile asset tracking system for automatically generating an inventory by snapping photos of the assets with a smartphone. Since smartphones are becoming ubiquitous, construction and deployment of our inventory management solution is simple and costeffective. Automatic asset recognition is achieved by first segmenting individual assets out of the query photo and then performing bag-of-visual-features (BoVF) image matching on the segmented regions. The smartphone's sensor readings, such as digital compass and accelerometer measurements, can be used to determine the location of each asset, and this location information is stored in the inventory for each recognized asset. As a special case study, we demonstrate a mobile book tracking system, where users snap photos of books stacked on bookshelves to generate a location-aware book inventory. It is shown that segmenting the book spines is very important for accurate feature-based image matching into a database of book spines. Segmentation also provides the exact orientation of each book spine, so more discriminative upright local features can be employed for improved recognition. This system's mobile client has been implemented for smartphones running the Symbian or Android operating systems. The client enables a user to snap a picture of a bookshelf and to subsequently view the recognized spines in the smartphone's viewfinder. Two different pose estimates, one from BoVF geometric matching and the other from segmentation boundaries, are both utilized to accurately draw the boundary of each spine in the viewfinder for easy visualization. The BoVF representation also allows matching each photo of a bookshelf rack against a photo of the entire bookshelf, and the resulting feature matches are used in conjunction with the smartphone

Youth's Awareness of and Reactions to The Real Cost National Tobacco Public Education Campaign.

Directory of Open Access Journals (Sweden)

Jennifer C Duke

Full Text Available In 2014, the Food and Drug Administration (FDA launched its first tobacco-focused public education campaign, The Real Cost, aimed at reducing tobacco use among 12- to 17-year-olds in the United States. This study describes The Real Cost message strategy, implementation, and initial evaluation findings. The campaign was designed to encourage youth who had never smoked but are susceptible to trying cigarettes (susceptible nonsmokers and youth who have previously experimented with smoking (experimenters to reassess what they know about the "costs" of tobacco use to their body and mind. The Real Cost aired on national television, online, radio, and other media channels, resulting in high awareness levels. Overall, 89.0% of U.S. youth were aware of at least one advertisement 6 to 8 months after campaign launch, and high levels of awareness were attained within the campaign's two targeted audiences: susceptible nonsmokers (90.5% and experimenters (94.6%. Most youth consider The Real Cost advertising to be effective, based on assessments of ad perceived effectiveness (mean = 4.0 on a scale from 1.0 to 5.0. High levels of awareness and positive ad reactions are requisite proximal indicators of health behavioral change. Additional research is being conducted to assess whether potential shifts in population-level cognitions and/or behaviors are attributable to this campaign. Current findings demonstrate that The Real Cost has attained high levels of ad awareness which is a critical first step in achieving positive changes in tobacco-related attitudes and behaviors. These data can also be used to inform ongoing message and media strategies for The Real Cost and other U.S. youth tobacco prevention campaigns.

Youth's Awareness of and Reactions to The Real Cost National Tobacco Public Education Campaign.

Science.gov (United States)

Duke, Jennifer C; Alexander, Tesfa N; Zhao, Xiaoquan; Delahanty, Janine C; Allen, Jane A; MacMonegle, Anna J; Farrelly, Matthew C

2015-01-01

In 2014, the Food and Drug Administration (FDA) launched its first tobacco-focused public education campaign, The Real Cost, aimed at reducing tobacco use among 12- to 17-year-olds in the United States. This study describes The Real Cost message strategy, implementation, and initial evaluation findings. The campaign was designed to encourage youth who had never smoked but are susceptible to trying cigarettes (susceptible nonsmokers) and youth who have previously experimented with smoking (experimenters) to reassess what they know about the "costs" of tobacco use to their body and mind. The Real Cost aired on national television, online, radio, and other media channels, resulting in high awareness levels. Overall, 89.0% of U.S. youth were aware of at least one advertisement 6 to 8 months after campaign launch, and high levels of awareness were attained within the campaign's two targeted audiences: susceptible nonsmokers (90.5%) and experimenters (94.6%). Most youth consider The Real Cost advertising to be effective, based on assessments of ad perceived effectiveness (mean = 4.0 on a scale from 1.0 to 5.0). High levels of awareness and positive ad reactions are requisite proximal indicators of health behavioral change. Additional research is being conducted to assess whether potential shifts in population-level cognitions and/or behaviors are attributable to this campaign. Current findings demonstrate that The Real Cost has attained high levels of ad awareness which is a critical first step in achieving positive changes in tobacco-related attitudes and behaviors. These data can also be used to inform ongoing message and media strategies for The Real Cost and other U.S. youth tobacco prevention campaigns.

Robust guaranteed cost tracking control of quadrotor UAV with uncertainties.

Science.gov (United States)

Xu, Zhiwei; Nian, Xiaohong; Wang, Haibo; Chen, Yinsheng

2017-07-01

In this paper, a robust guaranteed cost controller (RGCC) is proposed for quadrotor UAV system with uncertainties to address set-point tracking problem. A sufficient condition of the existence for RGCC is derived by Lyapunov stability theorem. The designed RGCC not only guarantees the whole closed-loop system asymptotically stable but also makes the quadratic performance level built for the closed-loop system have an upper bound irrespective to all admissible parameter uncertainties. Then, an optimal robust guaranteed cost controller is developed to minimize the upper bound of performance level. Simulation results verify the presented control algorithms possess small overshoot and short setting time, with which the quadrotor has ability to perform set-point tracking task well. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Different groups, different threats: a multi-threat approach to the experience of stereotype threats.

Science.gov (United States)

Shapiro, Jenessa R

2011-04-01

Two studies demonstrated that different negatively stereotyped groups are at risk for distinct forms of stereotype threats. The Multi-Threat Framework articulates six distinct stereotype threats and the unique constellations of variables (e.g., group identification, stereotype endorsement) that elicit each stereotype threat. Previous research suggests that different negatively stereotyped groups systematically vary across these stereotype threat elicitors; a pilot study confirms these differences. Across two studies, groups that tend to elicit low stereotype endorsement (religion, race/ethnicity, congenital blindness) were less likely to report experiencing self-as-source stereotype threats (stereotype threats requiring stereotype endorsement) and groups that tend to elicit low group identification (mental illness, obesity, blindness later in life) were less likely to report experiencing group-as-target stereotype threats (stereotype threats requiring group identification). This research suggests that traditional models may overlook the experiences of stereotype threats within some groups and that interventions tailored to address differences between stereotype threats will be most effective.

System identification of a small low-cost unmanned aerial vehicle using flight data from low-cost sensors

Science.gov (United States)

Hoffer, Nathan Von

Remote sensing has traditionally been done with satellites and manned aircraft. While. these methods can yield useful scientificc data, satellites and manned aircraft have limitations in data frequency, process time, and real time re-tasking. Small low-cost unmanned aerial vehicles (UAVs) provide greater possibilities for personal scientic research than traditional remote sensing platforms. Precision aerial data requires an accurate vehicle dynamics model for controller development, robust flight characteristics, and fault tolerance. One method of developing a model is system identification (system ID). In this thesis system ID of a small low-cost fixed-wing T-tail UAV is conducted. The linerized longitudinal equations of motion are derived from first principles. Foundations of Recursive Least Squares (RLS) are presented along with RLS with an Error Filtering Online Learning scheme (EFOL). Sensors, data collection, data consistency checking, and data processing are described. Batch least squares (BLS) and BLS with EFOL are used to identify aerodynamic coecoefficients of the UAV. Results of these two methods with flight data are discussed.

Experimental estimation of snare detectability for robust threat monitoring

OpenAIRE

O Kelly, H. J.; Rowcliffe, M.; Durant, S.; Milner-Gulland, E. J.

2018-01-01

Hunting with wire snares is rife within many tropical forest systems, and constitutes one of the severest threats to a wide range of vertebrate taxa. As for all threats, reliable monitoring of snaring levels is critical for assessing the relative effectiveness of management interventions. However, snares pose a particular challenge in terms of tracking spatial or temporal trends in their prevalence because they are extremely difficult to detect, and are typically spread across large, inaccess...

Youth's Awareness of and Reactions to The Real Cost National Tobacco Public Education Campaign

Science.gov (United States)

Duke, Jennifer C.; Alexander, Tesfa N.; Zhao, Xiaoquan; Delahanty, Janine C.; Allen, Jane A.; MacMonegle, Anna J.; Farrelly, Matthew C.

2015-01-01

In 2014, the Food and Drug Administration (FDA) launched its first tobacco-focused public education campaign, The Real Cost, aimed at reducing tobacco use among 12- to 17-year-olds in the United States. This study describes The Real Cost message strategy, implementation, and initial evaluation findings. The campaign was designed to encourage youth who had never smoked but are susceptible to trying cigarettes (susceptible nonsmokers) and youth who have previously experimented with smoking (experimenters) to reassess what they know about the “costs” of tobacco use to their body and mind. The Real Cost aired on national television, online, radio, and other media channels, resulting in high awareness levels. Overall, 89.0% of U.S. youth were aware of at least one advertisement 6 to 8 months after campaign launch, and high levels of awareness were attained within the campaign’s two targeted audiences: susceptible nonsmokers (90.5%) and experimenters (94.6%). Most youth consider The Real Cost advertising to be effective, based on assessments of ad perceived effectiveness (mean = 4.0 on a scale from 1.0 to 5.0). High levels of awareness and positive ad reactions are requisite proximal indicators of health behavioral change. Additional research is being conducted to assess whether potential shifts in population-level cognitions and/or behaviors are attributable to this campaign. Current findings demonstrate that The Real Cost has attained high levels of ad awareness which is a critical first step in achieving positive changes in tobacco-related attitudes and behaviors. These data can also be used to inform ongoing message and media strategies for The Real Cost and other U.S. youth tobacco prevention campaigns. PMID:26679504

Directions of organisational and low-cost energy saving of engineering enterprises

Directory of Open Access Journals (Sweden)

Dzhedzhula Viacheslav V.

2014-01-01

Full Text Available The article analyses directions of energy saving of industrial enterprises. Taking into account the tendency to continuous growth of cost of energy resources, introduction of measures that would allow reduction of energy consumption of enterprises is an urgent task. One of the most important obstacles in the process of introduction of energy efficient solutions are fund limits and low awareness of owners and managers of industrial enterprises. The article offers a new classification of energy saving measures: apart from traditional expense and organisation measures it introduces the low-cost measures notion. It offers to consider low-cost those measures that are realised by the enterprise by means of own funds, moreover, their repayment term is not more than one year. It offers analytical expression for identification of annual funds saving from introduction of low-cost measures. It considers the process of identification of saving of funds from introduction of some of the main low-cost measures in detail: replacement of lighting units, balancing of ventilation networks and elimination of water leakages from pipelines and water supply equipment. Based on the analysis of bibliography information the article provides a list of main measures on energy saving, which could be referred to the low-cost ones. The proposed approaches would allow paying more attention to practical aspects of realisation of the concept of energy saving in the industry.

Cost-effective and robust mitigation of space debris in low earth orbit

Science.gov (United States)

Walker, R.; Martin, C.

It is predicted that the space debris population in low Earth orbit (LEO) will continue to grow and in an exponential manner in the long-term due to an increasing rate of collisions between large objects, unless internationally-accepted space debris mitigation measures are adopted soon. Such measures are aimed at avoiding the future generation of space debris objects and primarily need to be effective in preventing significant long-term growth in the debris population, even in the potential scenario of an increase in future space activity. It is also important that mitigation measures can limit future debris population levels, and therefore the underlying collision risk to space missions, to the lowest extent possible. However, for their wide acceptance, the cost of implementation associated with mitigation measures needs to be minimised as far as possible. Generally, a lower collision risk will cost more to achieve and vice versa, so it is necessary to strike a balance between cost and risk in order to find a cost-effective set of mitigation measures. In this paper, clear criteria are established in order to assess the cost-effectiveness of space debris mitigation measures. A full cost-risk-benefit trade-off analysis of numerous mitigation scenarios is presented. These scenarios consider explosion prevention and post-mission disposal of space systems, including de-orbiting to limited lifetime orbits and re-orbiting above the LEO region. The ESA DELTA model is used to provide long-term debris environment projections for these scenarios as input to the benefit and risk parts of the trade-off analysis. Manoeuvre requirements for the different post-mission disposal scenarios were also calculated in order to define the cost-related element. A 25-year post-mission lifetime de-orbit policy, combined with explosion prevention and mission-related object limitation, was found to be the most cost-effective solution to the space debris problem in LEO. This package would also

Cost awareness among doctors in an Irish university-affiliated teaching hospital

Directory of Open Access Journals (Sweden)

William H.C. Tiong

2011-11-01

Full Text Available Previous studies in USA and Canada have found that physicians and physicians in training have a limited understanding of medical care costs. In this study, we set out to survey all grades of doctors in the surgical department, emergency department, and anaesthetic department in a university-affiliated, Irish teaching hospital. Open-ended questionnaires on cost of 25 routinely used items in the hospital were sent to each department. The aims of the study were to assess the present knowledge of cost among the various grades of doctors, and to evaluate the level of professional experience on cost awareness and their confidence in their estimates. We had an overall response rate of 56.8% with 68.5% of doctors admitted to have estimated more than 90% of their responses. Ninety three percent of doctors have no confidence in their estimates on cost of listed items. We found that the lack of cost awareness was universal among doctors of all grades (P = 0.236. The doctors in our study population showed a high level of inaccuracy on their estimates of cost of routinely used items with 84% of the items overestimated. Our results were discouraging and demonstrated that considerable educational activity will be necessary if doctors are to be more cost effective in meeting the national health care budget.

Improving Insider Threat Training Awareness and Mitigation Programs at Nuclear Facilities.

Energy Technology Data Exchange (ETDEWEB)

Abbott, Shannon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-06-01

In recent years, insider threat programs have become an important aspect of nuclear security, and nuclear security training courses. However, many nuclear security insider threat programs fail to address the insider threat attack and monitoring potential that exists on information technology (IT) systems. This failure is critical because of the importance of information technology and networks in today’s world. IT systems offer an opportunity to perpetrate dangerous insider attacks, but they also present an opportunity to monitor for them and prevent them. This paper suggests a number of best practices for monitoring and preventing insider attacks on IT systems, and proposes the development of a new IT insider threat tabletop that can be used to help train nuclear security practitioners on how best to implement IT insider threat prevention best practices. The development of IT insider threat best practices and a practical tabletop exercise will allow nuclear security practitioners to improve nuclear security trainings as it integrates a critical part of insider threat prevention into the broader nuclear security system.

State estimation and control for low-cost unmanned aerial vehicles

CERN Document Server

Hajiyev, Chingiz; Yenal Vural, Sıtkı

2015-01-01

This book discusses state estimation and control procedures for a low-cost unmanned aerial vehicle (UAV). The authors consider the use of robust adaptive Kalman filter algorithms and demonstrate their advantages over the optimal Kalman filter in the context of the difficult and varied environments in which UAVs may be employed. Fault detection and isolation (FDI) and data fusion for UAV air-data systems are also investigated, and control algorithms, including the classical, optimal, and fuzzy controllers, are given for the UAV. The performance of different control methods is investigated and the results compared. State Estimation and Control of Low-Cost Unmanned Aerial Vehicles covers all the important issues for designing a guidance, navigation and control (GNC) system of a low-cost UAV. It proposes significant new approaches that can be exploited by GNC system designers in the future and also reviews the current literature. The state estimation, control and FDI methods are illustrated by examples and MATLAB...

MicroSensors Systems: detection of a dismounted threat

Science.gov (United States)

Davis, Bill; Berglund, Victor; Falkofske, Dwight; Krantz, Brian

2005-05-01

The Micro Sensor System (MSS) is a layered sensor network with the goal of detecting dismounted threats approaching high value assets. A low power unattended ground sensor network is dependant on a network protocol for efficiency in order to minimize data transmissions after network establishment. The reduction of network 'chattiness' is a primary driver for minimizing power consumption and is a factor in establishing a low probability of detection and interception. The MSS has developed a unique protocol to meet these challenges. Unattended ground sensor systems are most likely dependant on batteries for power which due to size determines the ability of the sensor to be concealed after placement. To minimize power requirements, overcome size limitations, and maintain a low system cost the MSS utilizes advanced manufacturing processes know as Fluidic Self-Assembly and Chip Scale Packaging. The type of sensing element and the ability to sense various phenomenologies (particularly magnetic) at ranges greater than a few meters limits the effectiveness of a system. The MicroSensor System will overcome these limitations by deploying large numbers of low cost sensors, which is made possible by the advanced manufacturing process used in production of the sensors. The MSS program will provide unprecedented levels of real-time battlefield information which greatly enhances combat situational awareness when integrated with the existing Command, Control, Communications, Computers, Intelligence, Surveillance and Reconnaissance (C4ISR) infrastructure. This system will provide an important boost to realizing the information dominant, network-centric objective of Joint Vision 2020.

Increasing Awareness of Insider Information Security Threats in Human Resource Department

OpenAIRE

Burcin Cetin Karabat; Cagatay Karabat

2012-01-01

An insider threat for companies is defined as a threat caused by malicious user who is an employee company. In recent years, there are number of work on insider threats in information security technologies. These works shows that companies should increasingly and seriously should take into account these threats. Human factors in companies constitute one of the weakest links in information security technology and its products used in human resource (HR) management departments. In the literatur...

The High Rise Low Cost Housing : Sustainable Neighbourhood Elements (Green Elements) in Malaysia

Science.gov (United States)

Wahi, Noraziah; Mohamad, Ismail; Mohamad Zin, Rosli; Munikanan, Vikneswaran; Junaini, Syahrizan

2018-03-01

The sustainable development is a vital measure to alleviate the greenhouse gas effect, global warming and any other environment issues. The sustainable neighbourhood concept is not new in Malaysia, However, the concept still needs attention and awareness from the stakeholders. This paper discusses on the sustainable neighbourhood elements specifically green elements application on the high rise low cost housing in Malaysia. Malaysia should have focused sustainable neighbourhood planning and design especially on the high rise low cost housing therefore the future generation can be benefited from this type development.

Development and Flight Test of a Robust Optical-Inertial Navigation System Using Low-Cost Sensors

National Research Council Canada - National Science Library

Nielsen, Michael B

2008-01-01

.... This algorithm provides an alternative to the Global Positioning System (GPS) as a precision navigation source, enabling navigation in GPS denied environments, using low-cost sensors and equipment...

Utilization of day surgery services at Upper hill Medical Centre and the Karen hospital in Nairobi: the influence of medical providers, cost and patient awareness.

Science.gov (United States)

Odhiambo, Mildred Adhiambo; Njuguna, Susan; Waireri-Onyango, Rachel; Mulimba, Josephat; Ngugi, Peter Mungai

2015-01-01

Health systems face challenges of improving access to health services due to rising health care costs. Innovative services such as day surgery would improve service delivery. Day surgery is a concept where patients are admitted for surgical procedures and discharged the same day. Though used widely in developed countries due to its advantages, utilization in developing countries has been low. This study sought to establish how utilization of day surgery services was influenced by medical providers, patient awareness and cost among other factors. The study design was cross sectional with self administered questionnaires used to collect data. Data analysis was done by using statistical package for social science (SPSS) and presented as frequencies, percentages and Spearman's correlation to establish relationship among variables. Medical providers included doctors, their employees and medical insurance providers. Most doctors were aware of day surgery services but their frequency of utilization was low. Furthermore, medical insurance providers approved only half of the requests for day surgery. Doctors' employees were aware of the services and most of them would recommend it to patients. Although, most patients were not aware of day surgery services those who were aware would prefer day surgery to in patient. Moreover, doctors and medical insurance providers considered day surgery to be cheaper than in patient. The study showed that medical providers and patient awareness had influence over day surgery utilization, though, cost alone did not influence day surgery utilization but as a combination with other factors.

Robustness of airline route networks

Science.gov (United States)

Lordan, Oriol; Sallan, Jose M.; Escorihuela, Nuria; Gonzalez-Prieto, David

2016-03-01

Airlines shape their route network by defining their routes through supply and demand considerations, paying little attention to network performance indicators, such as network robustness. However, the collapse of an airline network can produce high financial costs for the airline and all its geographical area of influence. The aim of this study is to analyze the topology and robustness of the network route of airlines following Low Cost Carriers (LCCs) and Full Service Carriers (FSCs) business models. Results show that FSC hubs are more central than LCC bases in their route network. As a result, LCC route networks are more robust than FSC networks.

Addressing Stereotype Threat is Critical to Diversity and Inclusion in Organizational Psychology

OpenAIRE

Casad, Bettina J.; Bryant, William J.

2016-01-01

Recently researchers have debated the relevance of stereotype threat to the workplace. Critics have argued that stereotype threat is not relevant in high stakes testing such as in personnel selection. We and others argue that stereotype threat is highly relevant in personnel selection, but our review focused on underexplored areas including effects of stereotype threat beyond test performance and the application of brief, low-cost interventions in the workplace. Relevant to the workplace, ste...

Understanding Consumer Preference Between Low Cost Airlines and Full Service Carriers : A Study on Consumer Choice and Decisions

OpenAIRE

Lee, Alex Hoong Onn

2008-01-01

The emergence of low cost or no frills airlines in last decade or so have posed considerable threat to the businesses of traditional full service airlines. The competition between the different type of airlines have changed the landscape of the airline industry tremendously and have provided air travelers with options which are unprecedented. The aim of this study is to understand consumer preference between low cost and full service airlines and to determine what are the motivations or facto...

Effectiveness and cost-effectiveness of an awareness campaign for colorectal cancer: a mathematical modeling study.

Science.gov (United States)

Whyte, Sophie; Harnan, Susan

2014-06-01

A campaign to increase the awareness of the signs and symptoms of colorectal cancer (CRC) and encourage self-presentation to a GP was piloted in two regions of England in 2011. Short-term data from the pilot evaluation on campaign cost and changes in GP attendances/referrals, CRC incidence, and CRC screening uptake were available. The objective was to estimate the effectiveness and cost-effectiveness of a CRC awareness campaign by using a mathematical model which extrapolates short-term outcomes to predict long-term impacts on cancer mortality, quality-adjusted life-years (QALYs), and costs. A mathematical model representing England (aged 30+) for a lifetime horizon was developed. Long-term changes to cancer incidence, cancer stage distribution, cancer mortality, and QALYs were estimated. Costs were estimated incorporating costs associated with delivering the campaign, additional GP attendances, and changes in CRC treatment. Data from the pilot campaign suggested that the awareness campaign caused a 1-month 10 % increase in presentation rates. Based on this, the model predicted the campaign to cost £5.5 million, prevent 66 CRC deaths and gain 404 QALYs. The incremental cost-effectiveness ratio compared to "no campaign" was £13,496 per QALY. Results were sensitive to the magnitude and duration of the increase in presentation rates and to disease stage. The effectiveness and cost-effectiveness of a cancer awareness campaign can be estimated based on short-term data. Such predictions will aid policy makers in prioritizing between cancer control strategies. Future cost-effectiveness studies would benefit from campaign evaluations reporting as follows: data completeness, duration of impact, impact on emergency presentations, and comparison with non-intervention regions.

Rethinking climate change as a security threat

Energy Technology Data Exchange (ETDEWEB)

Schoch, Corinne

2011-10-15

Once upon a time climate change was a strictly environment and development issue. Today it has become a matter of national and international security. Efforts to link climate change with violent conflict may not be based on solid evidence, but they have certainly captured the attention of governments. They have played a vital role in raising the much-needed awareness of climate change as an issue that deserves global action. But at what cost? Focusing on climate change as a security threat alone risks devolving humanitarian responsibilities to the military, ignoring key challenges and losing sight of those climate-vulnerable communities that stand most in need of protection.

MOCA: A Low-Power, Low-Cost Motion Capture System Based on Integrated Accelerometers

Directory of Open Access Journals (Sweden)

Elisabetta Farella

2007-01-01

Full Text Available Human-computer interaction (HCI and virtual reality applications pose the challenge of enabling real-time interfaces for natural interaction. Gesture recognition based on body-mounted accelerometers has been proposed as a viable solution to translate patterns of movements that are associated with user commands, thus substituting point-and-click methods or other cumbersome input devices. On the other hand, cost and power constraints make the implementation of a natural and efficient interface suitable for consumer applications a critical task. Even though several gesture recognition solutions exist, their use in HCI context has been poorly characterized. For this reason, in this paper, we consider a low-cost/low-power wearable motion tracking system based on integrated accelerometers called motion capture with accelerometers (MOCA that we evaluated for navigation in virtual spaces. Recognition is based on a geometric algorithm that enables efficient and robust detection of rotational movements. Our objective is to demonstrate that such a low-cost and a low-power implementation is suitable for HCI applications. To this purpose, we characterized the system from both a quantitative point of view and a qualitative point of view. First, we performed static and dynamic assessment of movement recognition accuracy. Second, we evaluated the effectiveness of user experience using a 3D game application as a test bed.

Meta-algorithmics patterns for robust, low cost, high quality systems

CERN Document Server

Simske, Steven J

2013-01-01

The confluence of cloud computing, parallelism and advanced machine intelligence approaches has created a world in which the optimum knowledge system will usually be architected from the combination of two or more knowledge-generating systems. There is a need, then, to provide a reusable, broadly-applicable set of design patterns to empower the intelligent system architect to take advantage of this opportunity. This book explains how to design and build intelligent systems that are optimized for changing system requirements (adaptability), optimized for changing system input (robustness), an

Low-cost photonic sensors for carbon dioxide exchange rate measurement

Science.gov (United States)

Bieda, Marcin S.; Sobotka, Piotr; Lesiak, Piotr; Woliński, Tomasz R.

2017-10-01

Carbon dioxide (CO2) measurement has an important role in atmosphere monitoring. Usually, two types of measurements are carried out. The first one is based on gas concentration measurement while the second involves gas exchange rate measurement between earth surface and atmosphere [1]. There are several methods which allow gas concentration measurement. However, most of them require expensive instrumentation or large devices (i.e. gas chambers). In order to precisely measure either CO2 concentration or CO2 exchange rate, preferably a sensors network should be used. These sensors must have small dimensions, low power consumption, and they should be cost-effective. Therefore, this creates a great demand for a robust low-power and low-cost CO2 sensor [2,3]. As a solution, we propose a photonic sensor that can measure CO2 concentration and also can be used to measure gas exchange by using the Eddy covariance method [1].

Offset Printing Plate Quality Sensor on a Low-Cost Processor

Directory of Open Access Journals (Sweden)

Francisco Tirado

2013-10-01

Full Text Available The aim of this work is to develop a microprocessor-based sensor that measures the quality of the offset printing plate through the introduction of different image analysis applications. The main features of the presented system are the low cost, the low amount of power consumption, its modularity and easy integration with other industrial modules for printing plates, and its robustness against noise environments. For the sake of clarity, a viability analysis of previous software is presented through different strategies, based on dynamic histogram and Hough transform. This paper provides performance and scalability data compared with existing costly commercial devices. Furthermore, a general overview of quality control possibilities for printing plates is presented and could be useful to a system where such controls are regularly conducted.

Satellite-aided survey sampling and implementation in low- and middle-income contexts: a low-cost/low-tech alternative.

Science.gov (United States)

Haenssgen, Marco J

2015-01-01

The increasing availability of online maps, satellite imagery, and digital technology can ease common constraints of survey sampling in low- and middle-income countries. However, existing approaches require specialised software and user skills, professional GPS equipment, and/or commercial data sources; they tend to neglect spatial sampling considerations when using satellite maps; and they continue to face implementation challenges analogous to conventional survey implementation methods. This paper presents an alternative way of utilising satellite maps and digital aides that aims to address these challenges. The case studies of two rural household surveys in Rajasthan (India) and Gansu (China) compare conventional survey sampling and implementation techniques with the use of online map services such as Google, Bing, and HERE maps. Modern yet basic digital technology can be integrated into the processes of preparing, implementing, and monitoring a rural household survey. Satellite-aided systematic random sampling enhanced the spatial representativeness of the village samples and entailed savings of approximately £4000 compared to conventional household listing, while reducing the duration of the main survey by at least 25 %. This low-cost/low-tech satellite-aided survey sampling approach can be useful for student researchers and resource-constrained research projects operating in low- and middle-income contexts with high survey implementation costs. While achieving transparent and efficient survey implementation at low costs, researchers aiming to adopt a similar process should be aware of the locational, technical, and logistical requirements as well as the methodological challenges of this strategy.

Cost-aware request routing in multi-geography cloud data centres using software-defined networking

Science.gov (United States)

Yuan, Haitao; Bi, Jing; Li, Bo Hu; Tan, Wei

2017-03-01

Current geographically distributed cloud data centres (CDCs) require gigantic energy and bandwidth costs to provide multiple cloud applications to users around the world. Previous studies only focus on energy cost minimisation in distributed CDCs. However, a CDC provider needs to deliver gigantic data between users and distributed CDCs through internet service providers (ISPs). Geographical diversity of bandwidth and energy costs brings a highly challenging problem of how to minimise the total cost of a CDC provider. With the recently emerging software-defined networking, we study the total cost minimisation problem for a CDC provider by exploiting geographical diversity of energy and bandwidth costs. We formulate the total cost minimisation problem as a mixed integer non-linear programming (MINLP). Then, we develop heuristic algorithms to solve the problem and to provide a cost-aware request routing for joint optimisation of the selection of ISPs and the number of servers in distributed CDCs. Besides, to tackle the dynamic workload in distributed CDCs, this article proposes a regression-based workload prediction method to obtain future incoming workload. Finally, this work evaluates the cost-aware request routing by trace-driven simulation and compares it with the existing approaches to demonstrate its effectiveness.

The French biofuels mandates under cost uncertainty - an assessment based on robust optimization

International Nuclear Information System (INIS)

Lorne, Daphne; Tchung-Ming, Stephane

2012-01-01

This paper investigates the impact of primary energy and technology cost uncertainty on the achievement of renewable and especially biofuel policies - mandates and norms - in France by 2030. A robust optimization technique that allows to deal with uncertainty sets of high dimensionality is implemented in a TIMES-based long-term planning model of the French energy transport and electricity sectors. The energy system costs and potential benefits (GHG emissions abatements, diversification) of the French renewable mandates are assessed within this framework. The results of this systemic analysis highlight how setting norms and mandates allows to reduce the variability of CO 2 emissions reductions and supply mix diversification when the costs of technological progress and prices are uncertain. Beyond that, we discuss the usefulness of robust optimization in complement of other techniques to integrate uncertainty in large-scale energy models. (authors)

A study of low-cost, robust assistive listening system (ALS) based on digital wireless technology.

Science.gov (United States)

Israsena, P; Dubsok, P; Pan-Ngum, S

2008-11-01

We have developed a simple, low-cost digital wireless broadcasting system prototype, intended for a classroom of hearing impaired students. The system is designed to be a low-cost alternative to an existing FM system. The system implemented is for short-range communication, with a one-transmitter, multiple-receiver configuration, which is typical for these classrooms. The data is source-coded for voice-band quality, FSK modulated, and broadcasted via a 915 MHz radio frequency. A DES encryption can optionally be added for better information security. Test results show that the system operating range is approximately ten metres, and the sound quality is close to telephone quality as intended. We also discuss performance issues such as sound, power and size, as well as transmission protocols. The test results are the proof of concept that the prototype is a viable alternative to an existing FM system. Improvements can be made to the system's sound quality via techniques such as channel coding, which is also discussed.

Low-Cost, Robust, and Field Portable Smartphone Platform Photometric Sensor for Fluoride Level Detection in Drinking Water.

Science.gov (United States)

Hussain, Iftak; Ahamad, Kamal Uddin; Nath, Pabitra

2017-01-03

Groundwater is the major source of drinking water for people living in rural areas of India. Pollutants such as fluoride in groundwater may be present in much higher concentration than the permissible limit. Fluoride does not give any visible coloration to water, and hence, no effort is made to remove or reduce the concentration of this chemical present in drinking water. This may lead to a serious health hazard for those people taking groundwater as their primary source of drinking water. Sophisticated laboratory grade tools such as ion selective electrodes (ISE) and portable spectrophotometers are commercially available for in-field detection of fluoride level in drinking water. However, such tools are generally expensive and require expertise to handle. In this paper, we demonstrate the working of a low cost, robust, and field portable smartphone platform fluoride sensor that can detect and analyze fluoride concentration level in drinking water. For development of the proposed sensor, we utilize the ambient light sensor (ALS) of the smartphone as light intensity detector and its LED flash light as an optical source. An android application "FSense" has been developed which can detect and analyze the fluoride concentration level in water samples. The custom developed application can be used for sharing of in-field sensing data from any remote location to the central water quality monitoring station. We envision that the proposed sensing technique could be useful for initiating a fluoride removal program undertaken by governmental and nongovernmental organizations here in India.

Development and Flight Test of a Robust Optical-Inertial Navigation System Using Low-Cost Sensors

Science.gov (United States)

2008-03-01

for this test. Though, marketed as a GPS/INS, it was in fact used simply as an IMU for this test. The raw inertial measurement data (from the...Performance Evaluation of Low Cost MEMS-Based IMU Integrated With GPS for Land Vehicle Navigation Application. MS Thesis, UCGE Reports Number

Flexible and robust N-doped carbon nanofiber film encapsulating uniformly silica nanoparticles: Free-standing long-life and low-cost electrodes for Li- and Na-Ion batteries

International Nuclear Information System (INIS)

Li, Liye; Liu, Pengcheng; Zhu, Kongjun; Wang, Jing; Tai, Guoan; Liu, Jinsong

2017-01-01

With the wearable electronics progressing rapidly, the demand for flexible, long-life and low-cost electrodes of Li-ion batteries (LIBs) becomes more and more urgent. Due to the abundant resources and low cost, silica (SiO_2), especially the amorphous one, has attracted a lot of interests on the application of anode materials for LIBs. However, SiO_2 still suffer from the poor cycling performance mainly caused by the huge volume change during cycling like other alloy-type materials. Furthermore, it remains a challenge to fabricate the SiO_2–based flexible electrode. Herein, we propose a facile in situ strategy to fabricate the electrospun robust free-standing SiO_2/carbon nanofibers (denoted as in-SCNFs) film constructed by N-doped carbon nanofibers encapsulating uniformly amorphous SiO_2 nanoparticles. The in situ synthesized finer SiO_2 nanoparticles in the in-SCNFs are uniformly encapsulated in flexible carbon nanofibers, which can effectively buffer the volume change. Furthermore, the robust in-SCNFs film possesses the excellent mechanical flexibility and strength. So, when served as the free-standing anode of LIBs, the in-SCNFs film exhibits superior cycling performance. A discharge specific capacity of 405 mAh/g can be delivered even after a long-term 1000 cycles at a large current density of 500 mA/g, and the retention is up to 115%. It is an exciting finding that the in-SCNFs film is also a long-life anode of Na-ion batteries (NIBs). The 99% of initial capacity can be kept after 250 cycles at 500 mA/g. To our best knowledge, this is the first report on the application of SiO_2/C composite for NIBs. These results suggest that the as-fabricated in-SCNFs film can become one promising free-standing long-life anode for LIBs and NIBs.

The impact of consumer awareness of water sector issues on willingness to pay and cost recovery in Zambia

Science.gov (United States)

Ntengwe, F. W.

The recovery of costs in water utilities is a key element in sustainability of both the provider and of the water resource itself. This paper examines the role played by consumer awareness in their willingness to pay for water supply in two cities in Zambia. Research conducted in Kitwe and Lusaka reveals that level of awareness, willingness to pay and cost recovery all vary directly. Whereas awareness may increase consumers’ willingness to pay, therefore assisting service provider’s cost recovery, the research presented here also reveals that factors such as ability to pay, affordability of bills, quality of water and of the service provided, as well as good business-consumer relations are important factors affecting a utility’s ability to recover its costs. If water utilities are to attain sustainability over the long-term, they will have to embark on and maintain consumer awareness programmes, raise the quality of service (e.g., through improved operation and maintenance), and develop and apply the right water tariff.

The Roots of Stereotype Threat: When Automatic Associations Disrupt Girls' Math Performance

Science.gov (United States)

Galdi, Silvia; Cadinu, Mara; Tomasetto, Carlo

2014-01-01

Although stereotype awareness is a prerequisite for stereotype threat effects (Steele & Aronson, 1995), research showed girls' deficit under stereotype threat before the emergence of math-gender stereotype awareness, and in the absence of stereotype endorsement. In a study including 240 six-year-old children, this paradox was addressed by…

Low-cost sensors to monitor groundwater drought in Somalia

Science.gov (United States)

Buytaert, W.; Ochoa-Tocachi, B. F.; Caniglia, D.; Haibe, K.; Butler, A. P.

2017-12-01

Somalia is one of the poorest countries in the world, devastated by conflict and suffering from the most severe droughts in living memory. Over 6 million people are in need of assistance, and about 3 million are threatened with famine. In April 2017, the WHO estimated that more than 25,000 people have been struck by cholera or acute watery diarrhoea and this number is rising quickly. About half a million Somalis have been displaced internally, many of which in search of water. Some 3 million pastoralists have lost 70% of livestock as a result of the drought. Humanitarian organisations and government agencies invest large amounts of resources to alleviate these conditions. It is paramount to inform the design, focus, and optimisation of these interventions by monitoring and quantifying water resources. Yet, regions such as Somalia are extremely sparsely gauged as a result of a combination of lack of resources and technical expertise, as well as the harsh geographical and geopolitical conditions. Low-cost, robust, and reliable sensors may provide a potential solution to this problem. We present the results of a research project that aimed to leverage new developments in sensor, logger, and data transmission technologies to develop low-cost water level sensors to monitor hand-dug groundwater wells in real time. We tested 3 types of sensor types, i.e. pressure transducers, ultrasound-based distance sensors, and lidar, which were coupled to low-cost logging systems. The different designs were tested both in laboratory conditions, and in-situ in hand-dug wells in Somaliland. Our results show that it is technically possible to build sensors with a total cost of around US$250 each, which are fit-for-purpose for the required application. In-situ deployment over a period of 2 months highlights their robustness despite severe logistical and practical challenges, though further tests are required to understand their long-term reliability. Operating the sensors at one

Low Power Design with High-Level Power Estimation and Power-Aware Synthesis

CERN Document Server

Ahuja, Sumit; Shukla, Sandeep Kumar

2012-01-01

Low-power ASIC/FPGA based designs are important due to the need for extended battery life, reduced form factor, and lower packaging and cooling costs for electronic devices. These products require fast turnaround time because of the increasing demand for handheld electronic devices such as cell-phones, PDAs and high performance machines for data centers. To achieve short time to market, design flows must facilitate a much shortened time-to-product requirement. High-level modeling, architectural exploration and direct synthesis of design from high level description enable this design process. This book presents novel research techniques, algorithms,methodologies and experimental results for high level power estimation and power aware high-level synthesis. Readers will learn to apply such techniques to enable design flows resulting in shorter time to market and successful low power ASIC/FPGA design. Integrates power estimation and reduction for high level synthesis, with low-power, high-level design; Shows spec...

An Instantaneous Low-Cost Point-of-Care Anemia Detection Device

Directory of Open Access Journals (Sweden)

Jaime Punter-Villagrasa

2015-02-01

Full Text Available We present a small, compact and portable device for point-of-care instantaneous early detection of anemia. The method used is based on direct hematocrit measurement from whole blood samples by means of impedance analysis. This device consists of a custom electronic instrumentation and a plug-and-play disposable sensor. The designed electronics rely on straightforward standards for low power consumption, resulting in a robust and low consumption device making it completely mobile with a long battery life. Another approach could be powering the system based on other solutions like indoor solar cells, or applying energy-harvesting solutions in order to remove the batteries. The sensing system is based on a disposable low-cost label-free three gold electrode commercial sensor for 50 µL blood samples. The device capability for anemia detection has been validated through 24 blood samples, obtained from four hospitalized patients at Hospital Clínic. As a result, the response, effectiveness and robustness of the portable point-of-care device to detect anemia has been proved with an accuracy error of 2.83% and a mean coefficient of variation of 2.57% without any particular case above 5%.

Laser Remediation of Threats Posed by Small Orbital Debris

Science.gov (United States)

Fork, Richard L.; Rogers, Jan R.; Hovater, Mary A.

2012-01-01

The continually increasing amount of orbital debris in near Earth space poses an increasing challenge to space situational awareness. Recent collisions of spacecraft caused abrupt increases in the density of both large and small debris in near Earth space. An especially challenging class of threats is that due to the increasing density of small (1 mm to 10 cm dimension) orbital debris. This small debris poses a serious threat since: (1) The high velocity enables even millimeter dimension debris to cause serious damage to vulnerable areas of space assets, e.g., detector windows; (2) The small size and large number of debris elements prevent adequate detection and cataloguing. We have identified solutions to this threat in the form of novel laser systems and novel ways of using these laser systems. While implementation of the solutions we identify is challenging we find approaches offering threat mitigation within time frames and at costs of practical interest. We base our analysis on the unique combination of coherent light specifically structured in both space and time and applied in novel ways entirely within the vacuum of space to deorbiting small debris. We compare and contrast laser based small debris removal strategies using ground based laser systems with strategies using space based laser systems. We find laser systems located and used entirely within space offer essential and decisive advantages over groundbased laser systems.

Design of a birefringent Michelson interferometer-based interleaver with ultra-low dispersion and low cost.

Science.gov (United States)

Hu, Haocheng; Zheng, Baozhong; Liu, Qingming; Li, Yang; Wu, Li; Gu, Shijie

2011-11-21

We design and demonstrate a birefringent Michelson interferometer based interleaver with ultra-low dispersion and low cost. The interleaver consists of polarizing beam splitters (PBS's) and quarter-wave plates and half-wave plates. The PBS's based Michelson interferometers provide the optical path difference for interference between the two orthogonal polarization components and the half-wave plates provide the birefringent needed to minimize ripple of output. The designed interleaver with two-stage interferometer in a 50 GHz channel spacing application exhibits a 0.5 dB passband and a 25 dB stopband both 27 GHz; a channel isolation higher than 35 dB and chromatic dispersion less than ±5 ps/nm within 0.5 dB passband; 1.3 dB insertion loss and 0.3 dB PDL; 0.04 GHz/°C thermal stability. Since all of the optical components can be optically bonded together, the device is robust and easy to be aligned, which reduces labor cost. © 2011 Optical Society of America

Low cost sensing technology for type 2 diabetes monitoring

Science.gov (United States)

Sarswat, Prashant; Free, Michael

2015-03-01

Alpha-hydroxybutyrate (2-hydroxybutyrate or α-HB) is becoming more widely recognized as an important metabolic biomarker that has been shown to be highly correlated with prediabetes and other metabolic diseases. In 2012 there were 86 million Americans with prediabetes, many of whom are not aware they have prediabetes, but could be diagnosed and treated to prevent type 2 diabetes if a simple, low-cost, convenient test were available. We have developed new, low-cost, accurate α-HB detection methods that can be used for the detection and monitoring of diseases such as prediabetes, type 2 diabetes, β-cell dysfunction, and early hyperglycemia. The new sensing method utilizes a diol recognition moiety, additives and a photoinitiator to detect α-HB at levels near 1 micro g/l in the presence of serum compounds such as lactic acid, sodium pyruvate, and glucose. The objective of this research is to improve the understanding of the interactions that enhance α-HB detection to enable additional improvements in α-HB detection as well as improvements in other biosensor applications.

Does imminent threat capture and hold attention?

Science.gov (United States)

Koster, Ernst H W; Crombez, Geert; Van Damme, Stefaan; Verschuere, Bruno; De Houwer, Jan

2004-09-01

According to models of attention and emotion, threat captures and holds attention. In behavioral tasks, robust evidence has been found for attentional holding but not for attentional capture by threat. An important explanation for the absence of attentional capture effects is that the visual stimuli used posed no genuine threat. The present study investigated whether visual cues that signal an aversive white noise can elicit attentional capture and holding effects. Cues presented in an attentional task were simultaneously provided with a threat value through an aversive conditioning procedure. Response latencies showed that threatening cues captured and held attention. These results support recent views on attention to threat, proposing that imminent threat captures attention in everyone. (c) 2004 APA, all rights reserved

End-user perspective of low-cost sensors for outdoor air pollution monitoring.

Science.gov (United States)

Rai, Aakash C; Kumar, Prashant; Pilla, Francesco; Skouloudis, Andreas N; Di Sabatino, Silvana; Ratti, Carlo; Yasar, Ansar; Rickerby, David

2017-12-31

Low-cost sensor technology can potentially revolutionise the area of air pollution monitoring by providing high-density spatiotemporal pollution data. Such data can be utilised for supplementing traditional pollution monitoring, improving exposure estimates, and raising community awareness about air pollution. However, data quality remains a major concern that hinders the widespread adoption of low-cost sensor technology. Unreliable data may mislead unsuspecting users and potentially lead to alarming consequences such as reporting acceptable air pollutant levels when they are above the limits deemed safe for human health. This article provides scientific guidance to the end-users for effectively deploying low-cost sensors for monitoring air pollution and people's exposure, while ensuring reasonable data quality. We review the performance characteristics of several low-cost particle and gas monitoring sensors and provide recommendations to end-users for making proper sensor selection by summarizing the capabilities and limitations of such sensors. The challenges, best practices, and future outlook for effectively deploying low-cost sensors, and maintaining data quality are also discussed. For data quality assurance, a two-stage sensor calibration process is recommended, which includes laboratory calibration under controlled conditions by the manufacturer supplemented with routine calibration checks performed by the end-user under final deployment conditions. For large sensor networks where routine calibration checks are impractical, statistical techniques for data quality assurance should be utilised. Further advancements and adoption of sophisticated mathematical and statistical techniques for sensor calibration, fault detection, and data quality assurance can indeed help to realise the promised benefits of a low-cost air pollution sensor network. Copyright © 2017 Elsevier B.V. All rights reserved.

Low power multi-camera system and algorithms for automated threat detection

Science.gov (United States)

Huber, David J.; Khosla, Deepak; Chen, Yang; Van Buer, Darrel J.; Martin, Kevin

2013-05-01

A key to any robust automated surveillance system is continuous, wide field-of-view sensor coverage and high accuracy target detection algorithms. Newer systems typically employ an array of multiple fixed cameras that provide individual data streams, each of which is managed by its own processor. This array can continuously capture the entire field of view, but collecting all the data and back-end detection algorithm consumes additional power and increases the size, weight, and power (SWaP) of the package. This is often unacceptable, as many potential surveillance applications have strict system SWaP requirements. This paper describes a wide field-of-view video system that employs multiple fixed cameras and exhibits low SWaP without compromising the target detection rate. We cycle through the sensors, fetch a fixed number of frames, and process them through a modified target detection algorithm. During this time, the other sensors remain powered-down, which reduces the required hardware and power consumption of the system. We show that the resulting gaps in coverage and irregular frame rate do not affect the detection accuracy of the underlying algorithms. This reduces the power of an N-camera system by up to approximately N-fold compared to the baseline normal operation. This work was applied to Phase 2 of DARPA Cognitive Technology Threat Warning System (CT2WS) program and used during field testing.

Avoiding the conflict: Metacognitive awareness drives the selection of low-demand contexts.

Science.gov (United States)

Desender, Kobe; Buc Calderon, Cristian; Van Opstal, Filip; Van den Bussche, Eva

2017-07-01

Previous research attempted to explain how humans strategically adapt behavior in order to achieve successful task performance. Recently, it has been suggested that 1 potential strategy is to avoid tasks that are too demanding. Here, we report 3 experiments that investigate the empirically neglected role of metacognitive awareness in this process. In these experiments, participants could freely choose between performing a task in either a high-demand or a low-demand context. Using subliminal priming, we ensured that participants were not aware of the visual stimuli creating these different demand contexts. Our results showed that participants who noticed a difference in task difficulty (i.e., metacognitive aware participants) developed a clear preference for the low-demand context. In contrast, participants who experienced no difference in task difficulty (i.e., metacognitive unaware participants) based their choices on variables unrelated to cognitive demand (e.g., the color or location associated with a context), and did not develop a preference for the low-demand context. Crucially, this pattern was found despite identical task performance in both metacognitive awareness groups. A multiple regression approach confirmed that metacognitive awareness was the main factor driving the preference for low-demand contexts. These results argue for an important role of metacognitive awareness in the strategic avoidance of demanding tasks. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Feasibility of a low-cost hearing screening in rural Indiana

Directory of Open Access Journals (Sweden)

Khalid M. Khan

2017-09-01

Full Text Available Abstract Background Hearing loss remains a neglected public health issue in the rural and agricultural communities in the United States and therefore, promotion of a low-cost hearing screening may be important for these underserved populations. The major objectives of our study were to assess feasibility of a low-cost telephone-administered hearing test in rural Indiana and to identify the challenges, barriers and viable implementation strategies associated with this test. Also, we evaluated whether a focus group session could change the hearing health attitude of rural residents. Methods We recruited 126 adults from six rural Indiana counties who participated in study activities in the following order: 1 a pre-focus group demographic, knowledge and attitude survey, 2 a focus group for discussing the feasibility of a telephone-administered hearing screening, 3 a post focus group attitude survey and 4 hearing was screened using an audiometer and self-assessment scale. These activities generated both qualitative and quantitative data, which were subsequently analyzed. Results Hearing impairment was perceived as an important public health issue. Many participants expressed interests to try the low-cost National Hearing Test (NHT. However, participants recommended NHT to be facilitated by community organizations to provide access to landline phones. The focus group turned out to be an excellent awareness building activity producing significant improvement in hearing health attitudes. Comparison of self and audiometric evaluations indicated underestimation of hearing handicap in our rural study population. Conclusions The study results underscore the urgent need for an effective strategy to promote low-cost hearing screening in rural US communities.

Monitoring urban air quality using a high-density network of low-cost sensor nodes in Oslo, Norway.

Science.gov (United States)

Castell, Nuria; Schneider, Philipp; Vogt, Matthias; Dauge, Franck R.; Lahoz, William; Bartonova, Alena

2017-04-01

Urban air quality represents a major public health burden and is a long-standing concern to citizens. Air pollution is associated with a range of diseases, symptoms and conditions that impair health and quality of life. In Oslo, traffic, especially exhaust from heavy-duty and private diesel vehicles and dust resuspension from studded tyres, together with wood burning in winter, are the main sources of pollution. Norway, as part of the European Economic Area, is obliged to comply with the European air quality regulations and ensure clean air. Despite this, Oslo has exceeded both the NO2 and PM10 thresholds for health protection defined in the Directive 2008/50/EC. The air quality in the Oslo area is continuously monitored in 12 compliance monitoring stations. These stations provide reliable and accurate data but their density is too low to provide a detailed spatial distribution of air quality. The emergence of low-cost nodes enables observations at high spatial resolution, providing the opportunity to enhance existing monitoring systems. However, the data generated by these nodes is significantly less accurate and precise than the data provided by reference equipment. We have conducted an evaluation of low-cost nodes to monitor NO2 and PM10, comparing the data collected with low-cost nodes against CEN (European Standardization Organization) reference analysers. During January and March 2016, a network of 24 nodes was deployed in Oslo. During January, high NO2 levels were observed for several days in a row coinciding with the formation of a thermal inversion. During March, we observed an episode with high PM10 levels due to road dust resuspension. Our results show that there is a major technical challenge associated with current commercial low-cost sensors, regarding the sensor robustness and measurement repeatability. Despite this, low-cost sensor nodes are able to reproduce the NO2 and PM10 variability. The data from the sensors was employed to generate detailed

Oil prices touch fifty year low - industry gears up for further cuts in operating costs

International Nuclear Information System (INIS)

Anon.

1999-01-01

International crude oil prices hit a 50-year low (inflation adjusted) in December 1998. Prices are now lower than in 1973 and are expected to remain low for several years; so much so that the future of production activities are under threat. The paper goes on to discuss the UK Government's initiative to tackle the problem and of the activities of the CRINE (Cost Reduction in the New Era) Network to reduce operating costs. The Government Oil and Gas Task Force aimed to develop strategies to reduce the cost base of UK gas and oil operations and recommend action by Government and/or the industry by summer 1999. The concern is that current costs of production on the UK continental shelf will make new offshore development uneconomic. A meeting in January 1999 agreed six key areas for action. The work of the Task Force overlaps that of Crine which, since 1992 has been working to drive down capital costs of developing oil and gas fields by innovative approaches including cooperation between companies. (UK)

Low-Cost High-Performance MRI

Science.gov (United States)

Sarracanie, Mathieu; Lapierre, Cristen D.; Salameh, Najat; Waddington, David E. J.; Witzel, Thomas; Rosen, Matthew S.

2015-10-01

Magnetic Resonance Imaging (MRI) is unparalleled in its ability to visualize anatomical structure and function non-invasively with high spatial and temporal resolution. Yet to overcome the low sensitivity inherent in inductive detection of weakly polarized nuclear spins, the vast majority of clinical MRI scanners employ superconducting magnets producing very high magnetic fields. Commonly found at 1.5-3 tesla (T), these powerful magnets are massive and have very strict infrastructure demands that preclude operation in many environments. MRI scanners are costly to purchase, site, and maintain, with the purchase price approaching $1 M per tesla (T) of magnetic field. We present here a remarkably simple, non-cryogenic approach to high-performance human MRI at ultra-low magnetic field, whereby modern under-sampling strategies are combined with fully-refocused dynamic spin control using steady-state free precession techniques. At 6.5 mT (more than 450 times lower than clinical MRI scanners) we demonstrate (2.5 × 3.5 × 8.5) mm3 imaging resolution in the living human brain using a simple, open-geometry electromagnet, with 3D image acquisition over the entire brain in 6 minutes. We contend that these practical ultra-low magnetic field implementations of MRI (standards for affordable (<$50,000) and robust portable devices.

Power affects performance when the pressure is on: evidence for low-power threat and high-power lift.

Science.gov (United States)

Kang, Sonia K; Galinsky, Adam D; Kray, Laura J; Shirako, Aiwa

2015-05-01

The current research examines how power affects performance in pressure-filled contexts. We present low-power-threat and high-power-lift effects, whereby performance in high-stakes situations suffers or is enhanced depending on one's power; that is, the power inherent to a situational role can produce effects similar to stereotype threat and lift. Three negotiations experiments demonstrate that role-based power affects outcomes but only when the negotiation is diagnostic of ability and, therefore, pressure-filled. We link these outcomes conceptually to threat and lift effects by showing that (a) role power affects performance more strongly when the negotiation is diagnostic of ability and (b) underperformance disappears when the low-power negotiator has an opportunity to self-affirm. These results suggest that stereotype threat and lift effects may represent a more general phenomenon: When the stakes are raised high, relative power can act as either a toxic brew (stereotype/low-power threat) or a beneficial elixir (stereotype/high-power lift) for performance. © 2015 by the Society for Personality and Social Psychology, Inc.

Simulation Based Low-Cost Composite Process Development at the US Air Force Research Laboratory

Science.gov (United States)

Rice, Brian P.; Lee, C. William; Curliss, David B.

2003-01-01

Low-cost composite research in the US Air Force Research Laboratory, Materials and Manufacturing Directorate, Organic Matrix Composites Branch has focused on the theme of affordable performance. Practically, this means that we use a very broad view when considering the affordability of composites. Factors such as material costs, labor costs, recurring and nonrecurring manufacturing costs are balanced against performance to arrive at the relative affordability vs. performance measure of merit. The research efforts discussed here are two projects focused on affordable processing of composites. The first topic is the use of a neural network scheme to model cure reaction kinetics, then utilize the kinetics coupled with simple heat transport models to predict, in real-time, future exotherms and control them. The neural network scheme is demonstrated to be very robust and a much more efficient method that mechanistic cure modeling approach. This enables very practical low-cost processing of thick composite parts. The second project is liquid composite molding (LCM) process simulation. LCM processing of large 3D integrated composite parts has been demonstrated to be a very cost effective way to produce large integrated aerospace components specific examples of LCM processes are resin transfer molding (RTM), vacuum assisted resin transfer molding (VARTM), and other similar approaches. LCM process simulation is a critical part of developing an LCM process approach. Flow simulation enables the development of the most robust approach to introducing resin into complex preforms. Furthermore, LCM simulation can be used in conjunction with flow front sensors to control the LCM process in real-time to account for preform or resin variability.

Knowledge and Awareness Implication on E-Waste Management ...

African Journals Online (AJOL)

Knowledge and Awareness Implication on E-Waste Management among ... and Awareness Implication on E-Waste Management among Nigerian Collegiate ... with e-waste may pose potential threat to human health and the environment.

Developing robust arsenic awareness prediction models using machine learning algorithms.

Science.gov (United States)

Singh, Sushant K; Taylor, Robert W; Rahman, Mohammad Mahmudur; Pradhan, Biswajeet

2018-04-01

Arsenic awareness plays a vital role in ensuring the sustainability of arsenic mitigation technologies. Thus far, however, few studies have dealt with the sustainability of such technologies and its associated socioeconomic dimensions. As a result, arsenic awareness prediction has not yet been fully conceptualized. Accordingly, this study evaluated arsenic awareness among arsenic-affected communities in rural India, using a structured questionnaire to record socioeconomic, demographic, and other sociobehavioral factors with an eye to assessing their association with and influence on arsenic awareness. First a logistic regression model was applied and its results compared with those produced by six state-of-the-art machine-learning algorithms (Support Vector Machine [SVM], Kernel-SVM, Decision Tree [DT], k-Nearest Neighbor [k-NN], Naïve Bayes [NB], and Random Forests [RF]) as measured by their accuracy at predicting arsenic awareness. Most (63%) of the surveyed population was found to be arsenic-aware. Significant arsenic awareness predictors were divided into three types: (1) socioeconomic factors: caste, education level, and occupation; (2) water and sanitation behavior factors: number of family members involved in water collection, distance traveled and time spent for water collection, places for defecation, and materials used for handwashing after defecation; and (3) social capital and trust factors: presence of anganwadi and people's trust in other community members, NGOs, and private agencies. Moreover, individuals' having higher social network positively contributed to arsenic awareness in the communities. Results indicated that both the SVM and the RF algorithms outperformed at overall prediction of arsenic awareness-a nonlinear classification problem. Lower-caste, less educated, and unemployed members of the population were found to be the most vulnerable, requiring immediate arsenic mitigation. To this end, local social institutions and NGOs could play a

Mobbing, threats to employees

Directory of Open Access Journals (Sweden)

Tatjana Vene

2012-02-01

Full Text Available RQ: Is there a connection among perception of hostile and unethical communication, timely removal of causes and employee satisfaction?Purpose: Perceived mobbing in the organization, analysing causes and timely removal of them without any effect; achieve an environment of satisfied employees. The purpose is to study the relationship amongthe categories: perceiving mobbing, removing the effects, employee satisfaction.Methods: Qualitative research approach, method of interview by using the seven steps principles.Results: The findings clearly state that being aware of the negative factors and psychological abuse in organizations was present. The interview participants perceived different negative behaviours especially by the female population and from the side of superiors. In some organizations perceived negative factors are insults,insinuations, low wages, inadequate working day, competition, lobbying, and verbal threats. All negative factors lead to serious implications for employees, in which the organization can lose its reputation, productivity is reduced, costs of employment can increase with more sick leaves and in extreme cases, the results can be soserious that the organization can end in bankruptcy or liquidation.Organization: The result of the study warns management to acceptcertain actions and remediate the situation in organizations. The employer and managers must do everything to protect their subordinates from violence and potential offenders.Society: The research study warns on the seriousness of mobbing among employees, the aim is to bring the issue to individuals and society. The victim usually needs help (health costs, losses in the pension system, increased unemployment, and lower productivity of the whole society.Originality: In view of the sensitivity of the issues, the author concludes that the existing research studies are based especially on closed questions (questionnaires; however, interviews create mutual trust between

An exploration of residents’ low-carbon awareness and behavior in Tianjin, China

International Nuclear Information System (INIS)

Bai, Yin; Liu, Yong

2013-01-01

This paper explores the empirical evidence of the link between residents’ low-carbon awareness and their behaviors in China. A questionnaire measuring seven dimensions (including low-carbon knowledge, low-carbon value, low-carbon attitude, private low-carbon behavior, public low-carbon behavior, barrier and motivator) was distributed to the residents of Tianjin, yielding 354 valid responses. The results indicated that there was a low-carbon awareness–behavior gap. In particular, the level of behavior was higher than awareness because the motivators were stronger than the barriers. Second, in exploring the affects of motivators versus barriers on the residents’ private and public low-carbon behaviors, we found that motivators promoted both private and public low-carbon behaviors while barriers significantly inhibited public low-carbon behaviors. Third, Chinese social and cultural factors are discussed to inform our exploration of the mechanisms forming the residents’ awareness–behavior gap. - Highlights: • There was a low-carbon awareness–behavior gap. • The level of behavior was higher than awareness. • The motivators promoted both private and public low-carbon behaviors. • The barriers significantly inhibited public low-carbon behaviors

A Simple, Low-cost, and Robust System to Measure the Volume of Hydrogen Evolved by Chemical Reactions with Aqueous Solutions.

Science.gov (United States)

Brack, Paul; Dann, Sandie; Wijayantha, K G Upul; Adcock, Paul; Foster, Simon

2016-08-17

There is a growing research interest in the development of portable systems which can deliver hydrogen on-demand to proton exchange membrane (PEM) hydrogen fuel cells. Researchers seeking to develop such systems require a method of measuring the generated hydrogen. Herein, we describe a simple, low-cost, and robust method to measure the hydrogen generated from the reaction of solids with aqueous solutions. The reactions are conducted in a conventional one-necked round-bottomed flask placed in a temperature controlled water bath. The hydrogen generated from the reaction in the flask is channeled through tubing into a water-filled inverted measuring cylinder. The water displaced from the measuring cylinder by the incoming gas is diverted into a beaker on a balance. The balance is connected to a computer, and the change in the mass reading of the balance over time is recorded using data collection and spreadsheet software programs. The data can then be approximately corrected for water vapor using the method described herein, and parameters such as the total hydrogen yield, the hydrogen generation rate, and the induction period can also be deduced. The size of the measuring cylinder and the resolution of the balance can be changed to adapt the setup to different hydrogen volumes and flow rates.

Low cost realization of space-borne synthectic aperture radar - MicroSAR

Science.gov (United States)

Carter, D.; Hall, C.

Spaceborne Earth Observation data has been used for decades in the areas of meteorology and optical imaging. The systems and satellites have, in the main, been owned and operated by a few government institutions and agencies. More recently industrial organizations in North America have joined the list. Few of these, however, include Synthetic Aperture Radar (SAR)., although the additional utility in terms of all weather, 24 hour measurement capability over the Earth's surface is well recognized. Three major factors explain this:1) Relationships between the SAR measurements of radar backscatter and images to the specific information needs have not been seen as sufficiently well understood or robust2) Availability of suitable sources, at the relevant performance and data quality have been inadequate to provide service assurance that is necessary to sustain commercial businesses3) Costs associated with building, launching and operating spaceborne SAR have not been low enough as to achieve an acceptable return of investment. A significant amount of research and development has been undertaken throughout the World to establish reliable and robust algorithms for information extraction from SAR data. Much of this work has been carried out utilizing airborne systems over localized and carefully controlled regions. In addition, an increasing number of pilot services have been offered by geo-information providers. This has allowed customer confidence to grow. With the status of spaceborne SAR being effectively in the development phase, commercial funding has been scarce, and there has been need to rely on government and institutional budgets. Today the increasing maturity of the technology of SAR and its applications is beginning to attract the commercial sector. This is the funding necessary to realize sufficient assets to be able to provide a robust supply of SAR data to the geo-information providers and subsequently a reliable service to customers. Reducing the costs

Portuguese Family Physicians' Awareness of Diagnostic and Laboratory Test Costs: A Cross-Sectional Study.

Directory of Open Access Journals (Sweden)

Luísa Sá

Full Text Available Physicians' ability to make cost-effective decisions has been shown to be affected by their knowledge of health care costs. This study assessed whether Portuguese family physicians are aware of the costs of the most frequently prescribed diagnostic and laboratory tests.A cross-sectional study was conducted in a representative sample of Portuguese family physicians, using computer-assisted telephone interviews for data collection. A Likert scale was used to assess physician's level of agreement with four statements about health care costs. Family physicians were also asked to estimate the costs of diagnostic and laboratory tests. Each physician's cost estimate was compared with the true cost and the absolute error was calculated.One-quarter (24%; 95% confidence interval: 23%-25% of all cost estimates were accurate to within 25% of the true cost, with 55% (95% IC: 53-56 overestimating and 21% (95% IC: 20-22 underestimating the true actual cost. The majority (76% of family physicians thought they did not have or were uncertain as to whether they had adequate knowledge of diagnostic and laboratory test costs, and only 7% reported receiving adequate education. The majority of the family physicians (82% said that they had adequate access to information about the diagnostic and laboratory test costs. Thirty-three percent thought that costs did not influence their decision to order tests, while 27% were uncertain.Portuguese family physicians have limited awareness of diagnostic and laboratory test costs, and our results demonstrate a need for improved education in this area. Further research should focus on identifying whether interventions in cost knowledge actually change ordering behavior, in identifying optimal methods to disseminate cost information, and on improving the cost-effectiveness of care.

Portuguese Family Physicians’ Awareness of Diagnostic and Laboratory Test Costs: A Cross-Sectional Study

Science.gov (United States)

Sá, Luísa; Costa-Santos, Cristina; Teixeira, Andreia; Couto, Luciana; Costa-Pereira, Altamiro; Hespanhol, Alberto; Santos, Paulo; Martins, Carlos

2015-01-01

Background Physicians’ ability to make cost-effective decisions has been shown to be affected by their knowledge of health care costs. This study assessed whether Portuguese family physicians are aware of the costs of the most frequently prescribed diagnostic and laboratory tests. Methods A cross-sectional study was conducted in a representative sample of Portuguese family physicians, using computer-assisted telephone interviews for data collection. A Likert scale was used to assess physician’s level of agreement with four statements about health care costs. Family physicians were also asked to estimate the costs of diagnostic and laboratory tests. Each physician’s cost estimate was compared with the true cost and the absolute error was calculated. Results One-quarter (24%; 95% confidence interval: 23%–25%) of all cost estimates were accurate to within 25% of the true cost, with 55% (95% IC: 53–56) overestimating and 21% (95% IC: 20–22) underestimating the true actual cost. The majority (76%) of family physicians thought they did not have or were uncertain as to whether they had adequate knowledge of diagnostic and laboratory test costs, and only 7% reported receiving adequate education. The majority of the family physicians (82%) said that they had adequate access to information about the diagnostic and laboratory test costs. Thirty-three percent thought that costs did not influence their decision to order tests, while 27% were uncertain. Conclusions Portuguese family physicians have limited awareness of diagnostic and laboratory test costs, and our results demonstrate a need for improved education in this area. Further research should focus on identifying whether interventions in cost knowledge actually change ordering behavior, in identifying optimal methods to disseminate cost information, and on improving the cost-effectiveness of care. PMID:26356625

Cultural Heritage Recording Utilising Low-Cost Closerange Photogrammetry

Directory of Open Access Journals (Sweden)

Melanie Kirchhöfer

2011-12-01

Full Text Available Cultural heritage is under a constant threat of damage or even destruction and comprehensive and accurate recording is necessary to attenuate the risk of losing heritage or serve as basis for reconstruction. Cost effective and easy to use methods are required to record cultural heritage, particularly during a world recession, and close-range photogrammetry has proven potential in this area. Off-the-shelf digital cameras can be used to rapidly acquire data at low cost, allowing non-experts to become involved. Exterior orientation of the camera during exposure ideally needs to be established for every image, traditionally requiring known coordinated target points. Establishing these points is time consuming and costly and using targets can be often undesirable on sensitive sites. MEMS-based sensors can assist in overcoming this problem by providing small-size and low-cost means to directly determine exterior orientation for close-range photogrammetry. This paper describes development of an image-based recording system, comprising an off-the-shelf digital SLR camera, a MEMS-based 3D orientation sensor and a GPS antenna. All system components were assembled in a compact and rigid frame that allows calibration of rotational and positional offsets between the components. The project involves collaboration between English Heritage and Loughborough University and the intention is to assess the system’s achievable accuracy and practicability in a heritage recording environment. Tests were conducted at Loughborough University and a case study at St. Catherine’s Oratory on the Isle of Wight, UK. These demonstrate that the data recorded by the system can indeed meet the accuracy requirements for heritage recording at medium accuracy (1-4cm, with either a single or even no control points. As the recording system has been configured with a focus on low-cost and easy-to-use components, it is believed to be suitable for heritage recording by non

Particle swarm optimization algorithm based low cost magnetometer calibration

Science.gov (United States)

Ali, A. S.; Siddharth, S., Syed, Z., El-Sheimy, N.

2011-12-01

Inertial Navigation Systems (INS) consist of accelerometers, gyroscopes and a microprocessor provide inertial digital data from which position and orientation is obtained by integrating the specific forces and rotation rates. In addition to the accelerometers and gyroscopes, magnetometers can be used to derive the absolute user heading based on Earth's magnetic field. Unfortunately, the measurements of the magnetic field obtained with low cost sensors are corrupted by several errors including manufacturing defects and external electro-magnetic fields. Consequently, proper calibration of the magnetometer is required to achieve high accuracy heading measurements. In this paper, a Particle Swarm Optimization (PSO) based calibration algorithm is presented to estimate the values of the bias and scale factor of low cost magnetometer. The main advantage of this technique is the use of the artificial intelligence which does not need any error modeling or awareness of the nonlinearity. The estimated bias and scale factor errors from the proposed algorithm improve the heading accuracy and the results are also statistically significant. Also, it can help in the development of the Pedestrian Navigation Devices (PNDs) when combined with the INS and GPS/Wi-Fi especially in the indoor environments

Low-cost embedded systems for democratizing ocean sensor technology in the coastal zone

Science.gov (United States)

Glazer, B. T.; Lio, H. I.

2017-12-01

Environmental sciences suffer from undersampling. Enabling sustained and unattended data collection in the coastal zone typically involves expensive instrumentation and infrastructure deployed as cabled observatories or moorings with little flexibility in deployment location following initial installation. High costs of commercially-available or custom instruments have limited the number of sensor sites that can be targeted by academic researchers, and have also limited engagement with the public. We have developed a novel, low-cost, open-source sensor and software platform to enable wireless data transfer of biogeochemical sensors in the coastal zone. The platform is centered upon widely available, low-cost, single board computers and microcontrollers. We have used a blend of on-hand research-grade sensors and low-cost open-source electronics that can be assembled by tech-savvy non-engineers. Robust, open-source code that remains customizable for specific miniNode configurations can match a specific site's measurement needs, depending on the scientific research priorities. We have demonstrated prototype capabilities and versatility through lab testing and field deployments of multiple sensor nodes with multiple sensor inputs, all of which are streaming near-real-time data from Kaneohe Bay over wireless RF links to a shore-based base station.

Low-cost inertial measurement unit.

Energy Technology Data Exchange (ETDEWEB)

Deyle, Travis Jay

2005-03-01

Sandia National Laboratories performs many expensive tests using inertial measurement units (IMUs)--systems that use accelerometers, gyroscopes, and other sensors to measure flight dynamics in three dimensions. For the purpose of this report, the metrics used to evaluate an IMU are cost, size, performance, resolution, upgradeability and testing. The cost of a precision IMU is very high and can cost hundreds of thousands of dollars. Thus the goals and results of this project are as follows: (1) Examine the data flow in an IMU and determine a generic IMU design. (2) Discuss a high cost IMU implementation and its theoretically achievable results. (3) Discuss design modifications that would save money for suited applications. (4) Design and implement a low cost IMU and discuss its theoretically achievable results. (5) Test the low cost IMU and compare theoretical results with empirical results. (6) Construct a more streamlined printed circuit board design reducing noise, increasing capabilities, and constructing a self-contained unit. Using these results, we can compare a high cost IMU versus a low cost IMU using the metrics from above. Further, we can examine and suggest situations where a low cost IMU could be used instead of a high cost IMU for saving cost, size, or both.

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

Science.gov (United States)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision

Markov chain algorithms: a template for building future robust low-power systems

Science.gov (United States)

Deka, Biplab; Birklykke, Alex A.; Duwe, Henry; Mansinghka, Vikash K.; Kumar, Rakesh

2014-01-01

Although computational systems are looking towards post CMOS devices in the pursuit of lower power, the expected inherent unreliability of such devices makes it difficult to design robust systems without additional power overheads for guaranteeing robustness. As such, algorithmic structures with inherent ability to tolerate computational errors are of significant interest. We propose to cast applications as stochastic algorithms based on Markov chains (MCs) as such algorithms are both sufficiently general and tolerant to transition errors. We show with four example applications—Boolean satisfiability, sorting, low-density parity-check decoding and clustering—how applications can be cast as MC algorithms. Using algorithmic fault injection techniques, we demonstrate the robustness of these implementations to transition errors with high error rates. Based on these results, we make a case for using MCs as an algorithmic template for future robust low-power systems. PMID:24842030

The roots of stereotype threat: when automatic associations disrupt girls' math performance.

Science.gov (United States)

Galdi, Silvia; Cadinu, Mara; Tomasetto, Carlo

2014-01-01

Although stereotype awareness is a prerequisite for stereotype threat effects (Steele & Aronson, 1995), research showed girls' deficit under stereotype threat before the emergence of math-gender stereotype awareness, and in the absence of stereotype endorsement. In a study including 240 six-year-old children, this paradox was addressed by testing whether automatic associations trigger stereotype threat in young girls. Whereas no indicators were found that children endorsed the math-gender stereotype, girls, but not boys, showed automatic associations consistent with the stereotype. Moreover, results showed that girls' automatic associations varied as a function of a manipulation regarding the stereotype content. Importantly, girls' math performance decreased in a stereotype-consistent, relative to a stereotype-inconsistent, condition and automatic associations mediated the relation between stereotype threat and performance. © 2013 The Authors. Child Development © 2013 Society for Research in Child Development, Inc.

Stereotype threat can reduce older adults' memory errors.

Science.gov (United States)

Barber, Sarah J; Mather, Mara

2013-01-01

Stereotype threat often incurs the cost of reducing the amount of information that older adults accurately recall. In the current research, we tested whether stereotype threat can also benefit memory. According to the regulatory focus account of stereotype threat, threat induces a prevention focus in which people become concerned with avoiding errors of commission and are sensitive to the presence or absence of losses within their environment. Because of this, we predicted that stereotype threat might reduce older adults' memory errors. Results were consistent with this prediction. Older adults under stereotype threat had lower intrusion rates during free-recall tests (Experiments 1 and 2). They also reduced their false alarms and adopted more conservative response criteria during a recognition test (Experiment 2). Thus, stereotype threat can decrease older adults' false memories, albeit at the cost of fewer veridical memories, as well.

Transactional costs of the interaction between business and government as a threat to the economic security of the state

Directory of Open Access Journals (Sweden)

Evmenov Aleksandr

2018-01-01

Full Text Available The article considers the costs of the interaction between the state and business as a threat to the development of the economy of the Russian Federation from the point of view of ensuring economic security. The authors identified significant obstacles both from the business and from the government side, which pose a threat to economic security. The study is of interest for the further development of a system of providing the economic security of the Russian Federation.

Scaling range sizes to threats for robust predictions of risks to biodiversity.

Science.gov (United States)

Keith, David A; Akçakaya, H Resit; Murray, Nicholas J

2018-04-01

Assessments of risk to biodiversity often rely on spatial distributions of species and ecosystems. Range-size metrics used extensively in these assessments, such as area of occupancy (AOO), are sensitive to measurement scale, prompting proposals to measure them at finer scales or at different scales based on the shape of the distribution or ecological characteristics of the biota. Despite its dominant role in red-list assessments for decades, appropriate spatial scales of AOO for predicting risks of species' extinction or ecosystem collapse remain untested and contentious. There are no quantitative evaluations of the scale-sensitivity of AOO as a predictor of risks, the relationship between optimal AOO scale and threat scale, or the effect of grid uncertainty. We used stochastic simulation models to explore risks to ecosystems and species with clustered, dispersed, and linear distribution patterns subject to regimes of threat events with different frequency and spatial extent. Area of occupancy was an accurate predictor of risk (0.81<|r|<0.98) and performed optimally when measured with grid cells 0.1-1.0 times the largest plausible area threatened by an event. Contrary to previous assertions, estimates of AOO at these relatively coarse scales were better predictors of risk than finer-scale estimates of AOO (e.g., when measurement cells are <1% of the area of the largest threat). The optimal scale depended on the spatial scales of threats more than the shape or size of biotic distributions. Although we found appreciable potential for grid-measurement errors, current IUCN guidelines for estimating AOO neutralize geometric uncertainty and incorporate effective scaling procedures for assessing risks posed by landscape-scale threats to species and ecosystems. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

A Robust Photogrammetric Processing Method of Low-Altitude UAV Images

Directory of Open Access Journals (Sweden)

Mingyao Ai

2015-02-01

Full Text Available Low-altitude Unmanned Aerial Vehicles (UAV images which include distortion, illumination variance, and large rotation angles are facing multiple challenges of image orientation and image processing. In this paper, a robust and convenient photogrammetric approach is proposed for processing low-altitude UAV images, involving a strip management method to automatically build a standardized regional aerial triangle (AT network, a parallel inner orientation algorithm, a ground control points (GCPs predicting method, and an improved Scale Invariant Feature Transform (SIFT method to produce large number of evenly distributed reliable tie points for bundle adjustment (BA. A multi-view matching approach is improved to produce Digital Surface Models (DSM and Digital Orthophoto Maps (DOM for 3D visualization. Experimental results show that the proposed approach is robust and feasible for photogrammetric processing of low-altitude UAV images and 3D visualization of products.

Hidden costs of low-cost screening mammography

International Nuclear Information System (INIS)

Cyrlak, D.

1987-01-01

Twenty-two hundred women in Orange County, California, took part in a low-cost mammography screening project sponsored by the American Cancer Society and the KCBS-TV. Patients were followed up by telephone and questioned about actual costs incurred as a result of screening mammography, including costs of repeated and follow-up mammograms, US examinations and surgical consultations. The total number of biopsies, cancers found, and the costs involved were investigated. The authors' results suggest that particularly in centers with a high positive call rate, the cost of screening mammograms accounts for only a small proportion of the medical costs

On the Context-Aware, Dynamic Spectrum Access for Robust Intraplatoon Communications

Directory of Open Access Journals (Sweden)

Michał Sybis

2018-01-01

Full Text Available Vehicle platooning is a promising technology that allows to improve the traffic efficiency and passengers safety. Platoons that use cooperative adaptive cruise control, however, require a reliable radio link between platoon members to ensure a required distance between the cars within the platoon, thus maintaining platoon safety. Nowadays, the communication can be realized with the use of 802.11p or cellular vehicle-to-vehicle (C-V2V, but none of this technology is able to provide a reliable link especially in the presence of high traffic or urban scenarios. Therefore, in this paper, we propose a dynamic spectrum management mechanism in V2V communications for platooning purposes. A management system architecture is proposed that comprises the use of context-aware databases, sensing nodes, and spectrum allocation entity. The proposed robust system design aims to keep only the minimum necessary information transmitted over the conventional intelligent transportation system (ITS channel, while moving the remaining data (nonsafety, service-aided, or infotainment to an alternative channel that is selected from the available pool of spectrum white spaces. The initial analysis indicates that the proposed system may significantly improve the performance of wireless communications for the purpose of vehicle platooning.

Metrics for smart security awareness

CSIR Research Space (South Africa)

Labuschagne, William A

2017-06-01

Full Text Available informing the response teams for reparations. These capabilities are possible by collecting data from the environment and ensuring intelligence is developed to react automatically without human intervention. The concept of smart cities has also been.... The data would be transported to a centralized situational awareness capability for analyses and create the appropriate response in the form of remedial action. The use of threat intelligence feeds could automatically sense the existence of a new threat...

Knowledge-based public health situation awareness

Science.gov (United States)

Mirhaji, Parsa; Zhang, Jiajie; Srinivasan, Arunkumar; Richesson, Rachel L.; Smith, Jack W.

2004-09-01

There have been numerous efforts to create comprehensive databases from multiple sources to monitor the dynamics of public health and most specifically to detect the potential threats of bioterrorism before widespread dissemination. But there are not many evidences for the assertion that these systems are timely and dependable, or can reliably identify man made from natural incident. One must evaluate the value of so called 'syndromic surveillance systems' along with the costs involved in design, development, implementation and maintenance of such systems and the costs involved in investigation of the inevitable false alarms1. In this article we will introduce a new perspective to the problem domain with a shift in paradigm from 'surveillance' toward 'awareness'. As we conceptualize a rather different approach to tackle the problem, we will introduce a different methodology in application of information science, computer science, cognitive science and human-computer interaction concepts in design and development of so called 'public health situation awareness systems'. We will share some of our design and implementation concepts for the prototype system that is under development in the Center for Biosecurity and Public Health Informatics Research, in the University of Texas Health Science Center at Houston. The system is based on a knowledgebase containing ontologies with different layers of abstraction, from multiple domains, that provide the context for information integration, knowledge discovery, interactive data mining, information visualization, information sharing and communications. The modular design of the knowledgebase and its knowledge representation formalism enables incremental evolution of the system from a partial system to a comprehensive knowledgebase of 'public health situation awareness' as it acquires new knowledge through interactions with domain experts or automatic discovery of new knowledge.

Robustness of Structures

DEFF Research Database (Denmark)

Faber, Michael Havbro; Vrouwenvelder, A.C.W.M.; Sørensen, John Dalsgaard

2011-01-01

In 2005, the Joint Committee on Structural Safety (JCSS) together with Working Commission (WC) 1 of the International Association of Bridge and Structural Engineering (IABSE) organized a workshop on robustness of structures. Two important decisions resulted from this workshop, namely...... ‘COST TU0601: Robustness of Structures’ was initiated in February 2007, aiming to provide a platform for exchanging and promoting research in the area of structural robustness and to provide a basic framework, together with methods, strategies and guidelines enhancing robustness of structures...... the development of a joint European project on structural robustness under the COST (European Cooperation in Science and Technology) programme and the decision to develop a more elaborate document on structural robustness in collaboration between experts from the JCSS and the IABSE. Accordingly, a project titled...

Robust Guaranteed Cost Observer Design for Singular Markovian Jump Time-Delay Systems with Generally Incomplete Transition Probability

Directory of Open Access Journals (Sweden)

Yanbo Li

2014-01-01

Full Text Available This paper is devoted to the investigation of the design of robust guaranteed cost observer for a class of linear singular Markovian jump time-delay systems with generally incomplete transition probability. In this singular model, each transition rate can be completely unknown or only its estimate value is known. Based on stability theory of stochastic differential equations and linear matrix inequality (LMI technique, we design an observer to ensure that, for all uncertainties, the resulting augmented system is regular, impulse free, and robust stochastically stable with the proposed guaranteed cost performance. Finally, a convex optimization problem with LMI constraints is formulated to design the suboptimal guaranteed cost filters for linear singular Markovian jump time-delay systems with generally incomplete transition probability.

Robust sigma delta converters : and their application in low-power highly-digitized flexible receivers

NARCIS (Netherlands)

Veldhoven, van R.H.M.; Roermund, van A.H.M.

2011-01-01

Sigma Delta converters are a very popular choice for the A/D converter in multi-standard, mobile and cellular receivers. Key A/D converter specifications are high dynamic range, robustness, scalability, low-power and low EMI. Robust Sigma Delta Converters presents a requirement derivation of a Sigma

Inculcating health awareness in Karachi, Pakistan: How innovative, socially acceptable methods can help combat communicable diseases of poverty

Directory of Open Access Journals (Sweden)

Maryam Huda

2017-06-01

the neighbouring settlement of Hijrat Colony. As a result, this article suggests that the need for and efficacy of targeted health awareness campaigns against the major infectious diseases of poverty cannot be overemphasised. By adopting community-based participatory models, couched in a framework of social accountability, activities that are low cost, innovative and scientifically robust hold real potential for improving health awareness in vulnerable megacities like Karachi.

The Effect of ASEAN Open Skies Policy 2015 Upon Opportunities for Low-Cost Carriers in Indonesia – A Case Study of PT. Citilink

Directory of Open Access Journals (Sweden)

Sri Nurhendiarni

2015-06-01

Full Text Available The ASEAN Open Skies agreement is included in the ASEAN Economic Community’s blueprint and will be implemented in 2015. This study is intended to assist Citilink - an Indonesian low-cost carrier airline - in measuring its level of awareness and analyzing its SWOT towards the ASEAN Open Skies Policy 2015. This descriptive study utilizes quantitative and qualitative approaches and collected data from both primary and secondary sources. Questionnaires were distributed to Citilink Staff and analyzed using IBM SPSS and SPSS Amos. The awareness level of Citilink staff towards the ASEAN Open Skies Policy turned out to be high and the knowledge factor significantly influenced the awareness level. The study identified both benefits and drawbacks to the implementation of the ASEAN Open Skies Policy; however, Citilink already holds a good position as an Indonesian low-cost carrier and must pursue an aggressive strategy to maximize opportunities so that it can compete successfully at the regional level.    

THE EFFECT OF ASEAN OPEN SKIES POLICY 2015 UPON OPPORTUNITIES FOR LOW-COST CARRIERS IN INDONESIA – A CASE STUDY OF PT.CITILINK

Directory of Open Access Journals (Sweden)

Sri Nurhendiarni

2015-04-01

Full Text Available The ASEAN Open Skies agreement is included in the ASEAN Economic Community’s blueprint and will be implemented in 2015. This study is intended to assist Citilink - an Indonesian low-cost carrier airline - in measuring its level of awareness and analyzing its SWOT towards the ASEAN Open Skies Policy 2015. This descriptive study utilizes quantitative and qualitative approaches and collected data from both primary and secondary sources. Questionnaires were distributed to Citilink Staff and analyzed using IBM SPSS and SPSS Amos. The awareness level of Citilink staff towards the ASEAN Open Skies Policy turned out to be high and the knowledge factor significantly influenced the awareness level. The study identified both benefits and drawbacks to the implementation of the ASEAN Open Skies Policy; however, Citilink already holds a good position as an Indonesian low-cost carrier and must pursue an aggressive strategy to maximize opportunities so that it can compete successfully at the regional level.

Benefits of integrating complementarity into priority threat management.

Science.gov (United States)

Chadés, Iadine; Nicol, Sam; van Leeuwen, Stephen; Walters, Belinda; Firn, Jennifer; Reeson, Andrew; Martin, Tara G; Carwardine, Josie

2015-04-01

Conservation decision tools based on cost-effectiveness analysis are used to assess threat management strategies for improving species persistence. These approaches rank alternative strategies by their benefit to cost ratio but may fail to identify the optimal sets of strategies to implement under limited budgets because they do not account for redundancies. We devised a multiobjective optimization approach in which the complementarity principle is applied to identify the sets of threat management strategies that protect the most species for any budget. We used our approach to prioritize threat management strategies for 53 species of conservation concern in the Pilbara, Australia. We followed a structured elicitation approach to collect information on the benefits and costs of implementing 17 different conservation strategies during a 3-day workshop with 49 stakeholders and experts in the biodiversity, conservation, and management of the Pilbara. We compared the performance of our complementarity priority threat management approach with a current cost-effectiveness ranking approach. A complementary set of 3 strategies: domestic herbivore management, fire management and research, and sanctuaries provided all species with >50% chance of persistence for $4.7 million/year over 20 years. Achieving the same result cost almost twice as much ($9.71 million/year) when strategies were selected by their cost-effectiveness ranks alone. Our results show that complementarity of management benefits has the potential to double the impact of priority threat management approaches. © 2014 Society for Conservation Biology.

Low-cost high purity production

Science.gov (United States)

Kapur, V. K.

1978-01-01

Economical process produces high-purity silicon crystals suitable for use in solar cells. Reaction is strongly exothermic and can be initiated at relatively low temperature, making it potentially suitable for development into low-cost commercial process. Important advantages include exothermic character and comparatively low process temperatures. These could lead to significant savings in equipment and energy costs.

The Burden of Power: Construing Power as Responsibility (Rather Than as Opportunity) Alters Threat-Challenge Responses.

Science.gov (United States)

Scholl, Annika; de Wit, Frank; Ellemers, Naomi; Fetterman, Adam K; Sassenberg, Kai; Scheepers, Daan

2018-07-01

Power usually lowers stress responses. In stressful situations, having high (vs. low) power heightens challenge and lowers threat. Yet, even power-holders may experience threat when becoming aware of the responsibility that accompanies their power. Power-holders can construe (i.e., understand) a high-power position primarily as opportunity to "make things happen" or as responsibility to "take care of things." Power-holders construing power as responsibility (rather than opportunity) may be more likely to experience demands-such as taking care of important decisions under their control-as outweighing their resources, resulting in less challenge and more threat. Four experiments with subjective and cardiovascular threat-challenge indicators support this. Going beyond prior work on structural aspects (e.g., power instability) that induce stress, we show that merely the way how power-holders construe their power can evoke stress. Specifically, we find that power construed as responsibility (vs. opportunity) is more likely to imply a "burden" for the power-holder.

Awareness, knowledge, and barriers to low vision services among eye care practitioners.

Science.gov (United States)

Jose, Judy; Thomas, Jyothi; Bhakat, Premjit; Krithica, S

2016-01-01

Eyesight plays an important role in our day today life. When the vision gets hampered, daily activities of an individual will be affected. The prevalence of visual impairment is increasing across the globe, with more burdens on the developing world. The uptake of low vision services remains to be low in developing countries like India. A newly constructed questionnaire using information from previously conducted telephonic interviews and article search was administered among 50 eye care practitioners from Kerala, India for the pilot study. Modifications were made in the questionnaire, based on the responses obtained from the pilot study. From their responses, awareness, knowledge, and barriers for the low vision services among eye care practitioners were assessed. (1) Pilot study - the Cronbach's alpha values obtained for knowledge, awareness and barrier questions were 0.814, 0.297, and 0.810, respectively, and content validity index was found to be 0.64. (2) Main study - 211 eye care practitioners from 12 states of India took part in the study that accounted for a response rate of 16.7%. The participants included were 95 (45%) men and 116 (55%) women with a mean age of 28.18 ± 7.04 years. The lack of awareness was found to be the major barrier in the provision and uptake of low vision services from the practitioner's perspective. The study results showed that there is a lack of awareness among eye care practitioners about low vision services, which acts as a major barrier in the effective delivery of these services.

Robust and Imperceptible Watermarking of Video Streams for Low Power Devices

Science.gov (United States)

Ishtiaq, Muhammad; Jaffar, M. Arfan; Khan, Muhammad A.; Jan, Zahoor; Mirza, Anwar M.

With the advent of internet, every aspect of life is going online. From online working to watching videos, everything is now available on the internet. With the greater business benefits, increased availability and other online business advantages, there is a major challenge of security and ownership of data. Videos downloaded from an online store can easily be shared among non-intended or unauthorized users. Invisible watermarking is used to hide copyright protection information in the videos. The existing methods of watermarking are less robust and imperceptible and also the computational complexity of these methods does not suit low power devices. In this paper, we have proposed a new method to address the problem of robustness and imperceptibility. Experiments have shown that our method has better robustness and imperceptibility as well as our method is computationally efficient than previous approaches in practice. Hence our method can easily be applied on low power devices.

A Low Cost Inflatable CubeSat Drag Brake Utilizing Sublimation

Science.gov (United States)

Horn, Adam Charles

The United Nations Inter-Agency Debris Coordination Committee has adopted a 25-year post-mission lifetime requirement for any satellite orbiting below 2000 km in order to mitigate the growing orbital debris threat. Low-cost CubeSats have become important satellite platforms with startling capabilities, but this guideline restricts them to altitudes below 600 km because they remain in orbit too long. In order to enable CubeSat deployments at higher release altitudes, a low-cost, ultra-reliable deorbit device is needed. This thesis reports on efforts to develop a deployable and passively inflatable drag brake that can deorbit from higher orbital altitudes, thereby complying with the 25-year orbital lifetime guideline. On the basis of concepts first implemented during the NASA Echo Satellite Project, this study investigated the design of an inflatable CubeSat drag device that utilizes sublimating benzoic acid powder as the inflation propellant. Testing has focused on demonstrating the functionality of charging a Mylar drag brake bladder with appropriate quantities of benzoic acid powder, and the exposure to a controlled-temperature vacuum chamber causing the bladder to inflate. Although results show a measureable increase in internal pressure when introduced to anticipated orbital temperatures, a significant air-derived expansion prior to sublimation was encountered due to the undetectable volume of ambient residual air in the fabricated membrane bladders. These tests have demonstrated the feasibility of this approach, thereby demonstrating that this concept can create a potentially smaller and less expensive drag device, eliminating inflation gas tanks and valves. In that way, this system can provide a low-cost, miniaturized system that reduces a CubeSat's orbital lifetime to less than 25 years, when placed at higher orbital altitude.

Proportional Transaction Costs in the Robust Control Approach to Option Pricing: The Uniqueness Theorem

Energy Technology Data Exchange (ETDEWEB)

El Farouq, Naïma, E-mail: naima.elfarouq@univ-bpclermont.fr [Université Blaise Pascal (Clermont-Ferrand II) (France); Bernhard, Pierre, E-mail: pierre.bernhard@inria.fr [INRIA Sophia Antipolis-Méditerranée (France)

2015-10-15

We prove the missing uniqueness theorem for the viscosity solution of a quasi-variational inequality related to a minimax impulse control problem modeling the option pricing with proportional transactions costs. This result makes our robust control approach of option pricing in the interval market model essentially complete.

Proportional Transaction Costs in the Robust Control Approach to Option Pricing: The Uniqueness Theorem

International Nuclear Information System (INIS)

El Farouq, Naïma; Bernhard, Pierre

2015-01-01

We prove the missing uniqueness theorem for the viscosity solution of a quasi-variational inequality related to a minimax impulse control problem modeling the option pricing with proportional transactions costs. This result makes our robust control approach of option pricing in the interval market model essentially complete

Measuring the Effects of Self-Awareness: Construction of the Self-Awareness Outcomes Questionnaire

Directory of Open Access Journals (Sweden)

Anna Sutton

2016-11-01

Full Text Available Dispositional self-awareness is conceptualized in several different ways, including insight, reflection, rumination and mindfulness, with the latter in particular attracting extensive attention in recent research. While self-awareness is generally associated with positive psychological well-being, these different conceptualizations are also each associated with a range of unique outcomes. This two part, mixed methods study aimed to advance understanding of dispositional self-awareness by developing a questionnaire to measure its outcomes. In Study 1, expert focus groups categorized and extended an initial pool of potential items from previous research. In Study 2, these items were reduced to a 38 item self-report questionnaire with four factors representing three beneficial outcomes (reflective self-development, acceptance and proactivity and one negative outcome (costs. Regression of these outcomes against self-awareness measures revealed that self-reflection and insight predicted beneficial outcomes, rumination predicted reduced benefits and increased costs, and mindfulness predicted both increased proactivity and costs. These studies help to refine the self-awareness concept by identifying the unique outcomes associated with the concepts of self-reflection, insight, reflection, rumination and mindfulness. It can be used in future studies to evaluate and develop awareness-raising techniques to maximize self-awareness benefits while minimizing related costs.

DOE site-specific threat assessment

International Nuclear Information System (INIS)

West, D.J.; Al-Ayat, R.A.; Judd, B.R.

1985-01-01

A facility manager faced with the challenges of protecting a nuclear facility against potential threats must consider the likelihood and consequences of such threats, know the capabilities of the facility safeguards and security systems, and make informed decisions about the cost-effectivness of safeguards and security upgrades. To help meet these challenges, the San Francisco Operations Office of the Department of Energy, in conjunction with the Lawrence Livermore Laboratory, has developed a site-specific threat assessment approach and a quantitative model to improve the quality and consistency of site-specific threat assessment and resultant security upgrade decisions at sensitive Department of Energy facilities. 5 figs

Jihadist Foreign Fighter Phenomenon in Western Europe: A Low-Probability, High-Impact Threat

Directory of Open Access Journals (Sweden)

Edwin Bakker

2015-11-01

Full Text Available The phenomenon of foreign fighters in Syria and Iraq is making headlines. Their involvement in the atrocities committed by terrorist groups such as the so-called “Islamic State” and Jabhat al-Nusra have caused grave concern and public outcry in the foreign fighters’ European countries of origin. While much has been written about these foreign fighters and the possible threat they pose, the impact of this phenomenon on Western European societies has yet to be documented. This Research Paper explores four particular areas where this impact is most visible: a violent incidents associated with (returned foreign fighters, b official and political responses linked to these incidents, c public opinion, and d anti-Islam reactions linked to these incidents. The authors conclude that the phenomenon of jihadist foreign fighters in European societies should be primarily regarded as a social and political threat, not a physical one. They consider the phenomenon of European jihadist foreign fighters a “low-probability, high-impact” threat.

Evaluating the performance of a low-cost GPS in precision agriculture applications

DEFF Research Database (Denmark)

Jensen, Kjeld; Larsen, Morten; Simonsen, Tom

2012-01-01

Field Robots are often equipped with a Real Time Kinematic (RTK) GPS to obtain precise positioning. In many precision agriculture applications, however, the robot operates in semi-structured environments like orchards and row crops, where local sensors such as computer vision and laser range...... scanners can produce accurate positioning relative to the crops. GPS is then primarily needed for robust inter-row navigation. This work evaluates a new low-cost GPS. Static tests were used to test the absolute accuracy. To test the GPS in a precision agriculture environment it was installed on a robot...

Managing Threat, Cost, and Incentive to Kill: The Short- and Long-Term Effects of Intervention in Mass Killings

Science.gov (United States)

Kathman, Jacob D.; Wood, Reed M.

2011-01-01

How do third-party interventions affect the severity of mass killings? The authors theorize that episodes of mass killing are the consequence of two factors: (1) the threat perceptions of the perpetrators and (2) the cost of implementing genocidal policies relative to other alternatives. To reduce genocidal hostilities, interveners must address…

A New Ultra-lightweight Authentication Protocol for Low Cost RFID Tags

Directory of Open Access Journals (Sweden)

Xin Wang

2013-05-01

Full Text Available The Radio Frequency Identification (RFID system has been widely used in almost every aspects of the society. At present, the problem of security and privacy become a key factor of severely blocking the widespread of its usage. However, due to restraints on RFID tag’s manufacturing cost, the traditional methods of encryption are not good candidate to defend the security of wireless communication channel between reader and tag. Designing lightweight or ultra-lightweight RFID authentication protocol has become a hot research topic recently. This paper proposes a new ultra-lightweight RFID authentication protocol with high robustness and execution efficiency. The proposed protocol requires only simple bit-wise operations, it has the characteristics of low storage requirement and communication cost. At the same time, through elaborate mechanism design, avoid the vulnerability of the existing ultra-lightweight authentication protocols.

A low-cost, tunable laser lock without laser frequency modulation

Science.gov (United States)

Shea, Margaret E.; Baker, Paul M.; Gauthier, Daniel J.

2015-05-01

Many experiments in optical physics require laser frequency stabilization. This can be achieved by locking to an atomic reference using saturated absorption spectroscopy. Often, the laser frequency is modulated and phase sensitive detection used. This method, while well-proven and robust, relies on expensive components, can introduce an undesirable frequency modulation into the laser, and is not easily frequency tuned. Here, we report a simple locking scheme similar to those implemented previously. We modulate the atomic resonances in a saturated absorption setup with an AC magnetic field created by a single solenoid. The same coil applies a DC field that allows tuning of the lock point. We use an auto-balanced detector to make our scheme more robust against laser power fluctuations and stray magnetic fields. The coil, its driver, and the detector are home-built with simple, cheap components. Our technique is low-cost, simple to setup, tunable, introduces no laser frequency modulation, and only requires one laser. We gratefully acknowledge the financial support of the NSF through Grant # PHY-1206040.

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

Science.gov (United States)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Performance Analysis of Cyber Security Awareness Delivery Methods

Science.gov (United States)

Abawajy, Jemal; Kim, Tai-Hoon

In order to decrease information security threats caused by human-related vulnerabilities, an increased concentration on information security awareness and training is necessary. There are numerous information security awareness training delivery methods. The purpose of this study was to determine what delivery method is most successful in providing security awareness training. We conducted security awareness training using various delivery methods such as text based, game based and a short video presentation with the aim of determining user preference delivery methods. Our study suggests that a combined delvery methods are better than individual secrity awareness delivery method.

Uncertainty in air quality observations using low-cost sensors

Science.gov (United States)

Castell, Nuria; Dauge, Franck R.; Dongol, Rozina; Vogt, Matthias; Schneider, Philipp

2016-04-01

Air pollution poses a threat to human health, and the WHO has classified air pollution as the world's largest single environmental health risk. In Europe, the majority of the population lives in areas where air quality levels frequently exceed WHO's ambient air quality guidelines. The emergence of low-cost, user-friendly and very compact air pollution platforms allowing observations at high spatial resolution in near real-time, provides us with new opportunities to simultaneously enhance existing monitoring systems as well as enable citizens to engage in more active environmental monitoring (citizen science). However the data sets generated by low-cost sensors show often questionable data quality. For many sensors, neither their error characteristics nor how their measurement capability holds up over time or through a range of environmental conditions, have been evaluated. We have conducted an exhaustive evaluation of the commercial low-cost platform AQMesh (measuring NO, NO2, CO, O3, PM10 and PM2.5) in laboratory and in real-world conditions in the city of Oslo (Norway). Co-locations in field of 24 platforms were conducted over a 6 month period (April to September 2015) allowing to characterize the temporal variability in the performance. Additionally, the field performance included the characterization on different monitoring urban monitoring sites characteristic of both traffic and background conditions. All the evaluations have been conducted against CEN reference method analyzers maintained according to the Norwegian National Reference Laboratory quality system. The results show clearly that a good performance in laboratory does not imply similar performance in real-world outdoor conditions. Moreover, laboratory calibration is not suitable for subsequent measurements in urban environments. In order to reduce the errors, sensors require on-site field calibration. Even after such field calibration, the platforms show a significant variability in the performance

Environmental Pollution: An Under-recognized Threat to Children's Health, Especially in Low- and Middle-Income Countries.

Science.gov (United States)

Suk, William A; Ahanchian, Hamid; Asante, Kwadwo Ansong; Carpenter, David O; Diaz-Barriga, Fernando; Ha, Eun-Hee; Huo, Xia; King, Malcolm; Ruchirawat, Mathuros; da Silva, Emerson R; Sly, Leith; Sly, Peter D; Stein, Renato T; van den Berg, Martin; Zar, Heather; Landrigan, Philip J

2016-03-01

Exposures to environmental pollutants during windows of developmental vulnerability in early life can cause disease and death in infancy and childhood as well as chronic, non-communicable diseases that may manifest at any point across the life span. Patterns of pollution and pollution-related disease change as countries move through economic development. Environmental pollution is now recognized as a major cause of morbidity and mortality in low- and middle-income countries (LMICs). According to the World Health Organization, pollution is responsible for 8.9 million deaths around the world each year; of these, 94% (8.4 million) are in LMICs. Toxic chemical pollution is growing into a major threat to children's health in LMICs. The disease and disability caused by environmental pollution have great economic costs, and these costs can undercut trajectories of national development. To combat pollution, improved programs of public health and environmental protection are needed in countries at every level of development. Pollution control strategies and technologies that have been developed in high-income countries must now be transferred to LMICs to assist these emerging economies to avoid the mistakes of the past. A new international clearinghouse is needed to define and track the health effects of pollution, quantify the economic costs of these effects, and direct much needed attention to environmental pollution as a risk factor for disease.

Awareness of women towards an emerging threat

International Nuclear Information System (INIS)

Yousif, F.; Haider, G.; Muhammad, N.; Haider, A.

2009-01-01

The human immunodeficiency virus/Acquired immunodeficiency syndrome (HIV/AIDS) pandemic continues it deadly assault in different parts of the world. Over 20 million people have died since the first case of AIDS was identified in 1981. Despite increased spending on HIV/AIDS programmes and improved responses by many governments, current global efforts remain entirely inadequate for an epidemic that is continuing to spiral out of control. The objective of this study was to determine the level of awareness about HIV and AIDS among women attending the obstetrics and gynaecology clinic. This Descriptive study was conducted in the Obstetric and Gynaecology clinic at LUMHS, Hyderabad Pakistan from fifth July 2007 to third Dec 2007. A total of 178 women attending obstetric and gynaecology clinic of age 20-55 years were selected randomly. Information was collected by pre-designed questionnaire to assess the level of awareness about HIV/AIDS. About 83.7% women had heard about HIV/AIDS and only 44.3% correctly stated the difference in HIV/AIDS. Only 41.5% of respondents knew how infected person would present, and 55.6% respondents knew that it is transmitted through close sexual relationship, while less than 50% correctly answered about mode of transmission through coughing, sneezing, hand shaking, kissing and ear/nose piercing. Among the respondents, 52.2% correctly answered that screening of blood before transmission can prevent HIV and only 38.2% respondents knew that HIV is preventable disease. Women demonstrated lack of knowledge regarding HIV/AIDS and there are considerable misconceptions and myths in certain aspects which need to be clarified through educating women. (author)

A scalable-low cost architecture for high gain beamforming antennas

KAUST Repository

Bakr, Omar; Johnson, Mark; Jungdong Park,; Adabi, Ehsan; Jones, Kevin; Niknejad, Ali

2010-01-01

Many state-of-the-art wireless systems, such as long distance mesh networks and high bandwidth networks using mm-wave frequencies, require high gain antennas to overcome adverse channel conditions. These networks could be greatly aided by adaptive beamforming antenna arrays, which can significantly simplify the installation and maintenance costs (e.g., by enabling automatic beam alignment). However, building large, low cost beamforming arrays is very complicated. In this paper, we examine the main challenges presented by large arrays, starting from electromagnetic and antenna design and proceeding to the signal processing and algorithms domain. We propose 3-dimensional antenna structures and hybrid RF/digital radio architectures that can significantly reduce the complexity and improve the power efficiency of adaptive array systems. We also present signal processing techniques based on adaptive filtering methods that enhance the robustness of these architectures. Finally, we present computationally efficient vector quantization techniques that significantly improve the interference cancellation capabilities of analog beamforming architectures. © 2010 IEEE.

A scalable-low cost architecture for high gain beamforming antennas

KAUST Repository

Bakr, Omar

2010-10-01

Many state-of-the-art wireless systems, such as long distance mesh networks and high bandwidth networks using mm-wave frequencies, require high gain antennas to overcome adverse channel conditions. These networks could be greatly aided by adaptive beamforming antenna arrays, which can significantly simplify the installation and maintenance costs (e.g., by enabling automatic beam alignment). However, building large, low cost beamforming arrays is very complicated. In this paper, we examine the main challenges presented by large arrays, starting from electromagnetic and antenna design and proceeding to the signal processing and algorithms domain. We propose 3-dimensional antenna structures and hybrid RF/digital radio architectures that can significantly reduce the complexity and improve the power efficiency of adaptive array systems. We also present signal processing techniques based on adaptive filtering methods that enhance the robustness of these architectures. Finally, we present computationally efficient vector quantization techniques that significantly improve the interference cancellation capabilities of analog beamforming architectures. © 2010 IEEE.

Low Cognitive Awareness, but Not Complaint, is a Good Marker of Preclinical Alzheimer's Disease.

Science.gov (United States)

Cacciamani, Federica; Tandetnik, Caroline; Gagliardi, Geoffroy; Bertin, Hugo; Habert, Marie-Odile; Hampel, Harald; Boukadida, Laurie; Révillon, Marie; Epelbaum, Stéphane; Dubois, Bruno

2017-01-01

Subjective cognitive decline (SCD) may result from many conditions, including Alzheimer's disease (AD). In this study, we searched for a specific pattern of SCD in asymptomatic individuals at risk for AD. Cognitively normal older adults (N = 318) reporting SCD and their informants were enrolled in the INSIGHT-PreAD cohort. We examined the relationship between six SCD measures and both cognitive scores and AD neuroimaging markers (amyloid burden, hippocampal atrophy and brain hypometabolism). An awareness of cognitive decline index (ACDI) has been introduced based on the subject-informant discrepancy in a questionnaire of SCD and participants with low versus high awareness were compared. Scores in the INSIGHT-PreAD SCD questionnaires did not correlate with AD neuroimaging markers. As well, no correlation has been found between SCD measures and cognitive scores. Comparing subjects with a low (n = 19) and high (n = 86) level of awareness, no significant difference in terms of demography, neuropsychiatric symptoms, autonomy, quality of life, cognition, and hippocampal volume was found. However, the "low awareness" group showed greater amyloid burden and lower cortical metabolism, compared to the "high awareness" group. This study provided additional evidence that reporting SCD by itself is not a specific symptom of preclinical AD. Conversely, a low cognitive awareness (namely, when subjects report fewer difficulties than their relatives do) may represent a very early form of anosognosia and serve as a specific indicator of preclinical AD. This finding is of key importance as an enrichment factor to consider in both clinical practice and research trials.

Using low-cost drones to map malaria vector habitats.

Science.gov (United States)

Hardy, Andy; Makame, Makame; Cross, Dónall; Majambere, Silas; Msellem, Mwinyi

2017-01-14

There is a growing awareness that if we are to achieve the ambitious goal of malaria elimination, we must compliment indoor-based vector control interventions (such as bednets and indoor spraying) with outdoor-based interventions such as larval source management (LSM). The effectiveness of LSM is limited by our capacity to identify and map mosquito aquatic habitats. This study provides a proof of concept for the use of a low-cost (drone (DJI Phantom) for mapping water bodies in seven sites across Zanzibar including natural water bodies, irrigated and non-irrigated rice paddies, peri-urban and urban locations. With flying times of less than 30 min for each site, high-resolution (7 cm) georeferenced images were successfully generated for each of the seven sites, covering areas up to 30 ha. Water bodies were readily identifiable in the imagery, as well as ancillary information for planning LSM activities (access routes to water bodies by road and foot) and public health management (e.g. identification of drinking water sources, mapping individual households and the nature of their construction). The drone-based surveys carried out in this study provide a low-cost and flexible solution to mapping water bodies for operational dissemination of LSM initiatives in mosquito vector-borne disease elimination campaigns. Generated orthomosaics can also be used to provide vital information for other public health planning activities.

Effect of evaluation threat on procrastination behavior.

Science.gov (United States)

Bui, Ngoc H

2007-06-01

The author evaluated the effects of evaluation apprehension and trait procrastination on behaviors. The author examined private university students from southern California (N = 72) on two independent variables: evaluation threat (manipulated) and trait procrastination (nonmanipulated). The author found a significant interaction effect between type of evaluation threat and level of trait procrastination on the number of days to complete an assigned essay. Post hoc analyses showed high trait procrastinators in the high evaluation threat group significantly delayed returning essays compared with those in the low evaluation threat group. Also, in the low evaluation threat group, low trait procrastinators delayed more than did high trait procrastinators. These results suggest that educators can reduce behavioral delays by increasing evaluation threat, depending on a student's level of trait procrastination.

Re-Engineering a High Performance Electrical Series Elastic Actuator for Low-Cost Industrial Applications

Directory of Open Access Journals (Sweden)

Kenan Isik

2017-01-01

Full Text Available Cost is an important consideration when transferring a technology from research to industrial and educational use. In this paper, we introduce the design of an industrial grade series elastic actuator (SEA performed via re-engineering a research grade version of it. Cost-constrained design requires careful consideration of the key performance parameters for an optimal performance-to-cost component selection. To optimize the performance of the new design, we started by matching the capabilities of a high-performance SEA while cutting down its production cost significantly. Our posit was that performing a re-engineering design process on an existing high-end device will significantly reduce the cost without compromising the performance drastically. As a case study of design for manufacturability, we selected the University of Texas Series Elastic Actuator (UT-SEA, a high-performance SEA, for its high power density, compact design, high efficiency and high speed properties. We partnered with an industrial corporation in China to research the best pricing options and to exploit the retail and production facilities provided by the Shenzhen region. We succeeded in producing a low-cost industrial grade actuator at one-third of the cost of the original device by re-engineering the UT-SEA with commercial off-the-shelf components and reducing the number of custom-made parts. Subsequently, we conducted performance tests to demonstrate that the re-engineered product achieves the same high-performance specifications found in the original device. With this paper, we aim to raise awareness in the robotics community on the possibility of low-cost realization of low-volume, high performance, industrial grade research and education hardware.

Awareness of occupational skin disease in the service sector.

Science.gov (United States)

Holness, D L; Kudla, I; Brown, J; Miller, S

2017-06-01

Occupational skin disease (OSD) is a common occupational disease. Although primary prevention strategies are known, OSDs remain prevalent in a variety of work environments including the service sector (restaurant/food services, retail/wholesale, tourism/hospitality and vehicle sales and service). To obtain information about awareness and prevention of OSD in the service sector. Focus groups and a survey were conducted with two groups. The first consisted of staff of the provincial health and safety association for the service sector and the second group comprised representatives from sector employers. Focus groups highlighted key issues to inform the survey that obtained information about perceptions of awareness and prevention of OSD and barriers to awareness and prevention. Both provincial health and safety association staff and sector employer representatives highlighted low awareness and a low level of knowledge of OSD in the sector. Barriers to awareness and prevention included a low reported incidence of OSD, low priority, lack of training materials, lack of time and cost of training, lack of management support and workplace culture. A starting point for improving prevention of OSD in the service sector is increased awareness. Identification of the barriers to awareness and prevention will help to shape an awareness campaign and prevention strategies. Building on existing experience in Europe will be important. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Decision and coordination of low-carbon supply chain considering technological spillover and environmental awareness.

Science.gov (United States)

Xu, Lang; Wang, Chuanxu; Li, Hui

2017-06-08

We focus on the impacts of technological spillovers and environmental awareness in a two-echelon supply chain with one-single supplier and one-single manufacturer to reduce carbon emission. In this supply chain, carbon abatement investment becomes one of key factors of cutting costs and improving profits, which is reducing production costs in the components and products-the investment from players in supply chain. On the basis of optimality theory, the centralized and decentralized models are respectively established to investigate the optimal decisions and profits. Further, setting the players' profits of the decentralized scenario as the disagreement points, we propose a bargaining-coordination contract through revenue-cost sharing to enhance the performance. Finally, by theoretical comparison and numerical analysis, the results show that: (i) The optimal profits of players and supply chain improve as technological spillovers and environmental awareness increase, and the profits of them in the bargaining-coordination contract are higher than that in the decentralized scenario; (ii) Technological spillovers between the players amplify the impact of "free-ride" behavior, in which the supplier always incentives the manufacturer to improve carbon emission intensity, but the cooperation will achieves and the profits will improve only when technological spillovers and environmental awareness are great; (iii) The contract can effectively achieve coordinated supply chain, and improve carbon abatement investment.

Low cost solar air heater

International Nuclear Information System (INIS)

Gill, R.S.; Singh, Sukhmeet; Singh, Parm Pal

2012-01-01

Highlights: ► Single glazed low cost solar air heater is more efficient during summer while double glazed is better in winter. ► For the same initial investment, low cost solar air heaters collect more energy than packed bed solar air heater. ► During off season low cost solar air heater can be stored inside as it is light in weight. - Abstract: Two low cost solar air heaters viz. single glazed and double glazed were designed, fabricated and tested. Thermocole, ultraviolet stabilised plastic sheet, etc. were used for fabrication to reduce the fabrication cost. These were tested simultaneously at no load and with load both in summer and winter seasons along with packed bed solar air heater using iron chips for absorption of radiation. The initial costs of single glazed and double glazed are 22.8% and 26.8% of the initial cost of packed bed solar air heater of the same aperture area. It was found that on a given day at no load, the maximum stagnation temperatures of single glazed and double glazed solar air heater were 43.5 °C and 62.5 °C respectively. The efficiencies of single glazed, double glazed and packed bed solar air heaters corresponding to flow rate of 0.02 m 3 /s-m 2 were 30.29%, 45.05% and 71.68% respectively in winter season. The collector efficiency factor, heat removal factor based on air outlet temperature and air inlet temperature for three solar air heaters were also determined.

Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering.

Directory of Open Access Journals (Sweden)

Isaac Nuñez

Full Text Available The advent of easy-to-use open source microcontrollers, off-the-shelf electronics and customizable manufacturing technologies has facilitated the development of inexpensive scientific devices and laboratory equipment. In this study, we describe an imaging system that integrates low-cost and open-source hardware, software and genetic resources. The multi-fluorescence imaging system consists of readily available 470 nm LEDs, a Raspberry Pi camera and a set of filters made with low cost acrylics. This device allows imaging in scales ranging from single colonies to entire plates. We developed a set of genetic components (e.g. promoters, coding sequences, terminators and vectors following the standard framework of Golden Gate, which allowed the fabrication of genetic constructs in a combinatorial, low cost and robust manner. In order to provide simultaneous imaging of multiple wavelength signals, we screened a series of long stokes shift fluorescent proteins that could be combined with cyan/green fluorescent proteins. We found CyOFP1, mBeRFP and sfGFP to be the most compatible set for 3-channel fluorescent imaging. We developed open source Python code to operate the hardware to run time-lapse experiments with automated control of illumination and camera and a Python module to analyze data and extract meaningful biological information. To demonstrate the potential application of this integral system, we tested its performance on a diverse range of imaging assays often used in disciplines such as microbial ecology, microbiology and synthetic biology. We also assessed its potential use in a high school environment to teach biology, hardware design, optics, and programming. Together, these results demonstrate the successful integration of open source hardware, software, genetic resources and customizable manufacturing to obtain a powerful, low cost and robust system for education, scientific research and bioengineering. All the resources developed here

Low cost and open source multi-fluorescence imaging system for teaching and research in biology and bioengineering.

Science.gov (United States)

Nuñez, Isaac; Matute, Tamara; Herrera, Roberto; Keymer, Juan; Marzullo, Timothy; Rudge, Timothy; Federici, Fernán

2017-01-01

The advent of easy-to-use open source microcontrollers, off-the-shelf electronics and customizable manufacturing technologies has facilitated the development of inexpensive scientific devices and laboratory equipment. In this study, we describe an imaging system that integrates low-cost and open-source hardware, software and genetic resources. The multi-fluorescence imaging system consists of readily available 470 nm LEDs, a Raspberry Pi camera and a set of filters made with low cost acrylics. This device allows imaging in scales ranging from single colonies to entire plates. We developed a set of genetic components (e.g. promoters, coding sequences, terminators) and vectors following the standard framework of Golden Gate, which allowed the fabrication of genetic constructs in a combinatorial, low cost and robust manner. In order to provide simultaneous imaging of multiple wavelength signals, we screened a series of long stokes shift fluorescent proteins that could be combined with cyan/green fluorescent proteins. We found CyOFP1, mBeRFP and sfGFP to be the most compatible set for 3-channel fluorescent imaging. We developed open source Python code to operate the hardware to run time-lapse experiments with automated control of illumination and camera and a Python module to analyze data and extract meaningful biological information. To demonstrate the potential application of this integral system, we tested its performance on a diverse range of imaging assays often used in disciplines such as microbial ecology, microbiology and synthetic biology. We also assessed its potential use in a high school environment to teach biology, hardware design, optics, and programming. Together, these results demonstrate the successful integration of open source hardware, software, genetic resources and customizable manufacturing to obtain a powerful, low cost and robust system for education, scientific research and bioengineering. All the resources developed here are available under

Textured digital elevation model formation from low-cost UAV LADAR/digital image data

Science.gov (United States)

Bybee, Taylor C.; Budge, Scott E.

2015-05-01

Textured digital elevation models (TDEMs) have valuable use in precision agriculture, situational awareness, and disaster response. However, scientific-quality models are expensive to obtain using conventional aircraft-based methods. The cost of creating an accurate textured terrain model can be reduced by using a low-cost (processing step and enables both 2D- and 3D-image registration techniques to be used. This paper describes formation of TDEMs using simulated data from a small UAV gathering swaths of texel images of the terrain below. Being a low-cost UAV, only a coarse knowledge of position and attitude is known, and thus both 2D- and 3D-image registration techniques must be used to register adjacent swaths of texel imagery to create a TDEM. The process of creating an aggregate texel image (a TDEM) from many smaller texel image swaths is described. The algorithm is seeded with the rough estimate of position and attitude of each capture. Details such as the required amount of texel image overlap, registration models, simulated flight patterns (level and turbulent), and texture image formation are presented. In addition, examples of such TDEMs are shown and analyzed for accuracy.

Insider Threats: DOD Should Strengthen Management and Guidance to Protect Classified Information and Systems

Science.gov (United States)

2015-06-01

2011). Insiders have an advantage over others who may want to harm an organization because insiders may have an awareness of their...process currently includes threat assessments, a risk-indicator matrix , and a risk assessment to prompt organizations to consider threats and risk to...is to oversee departmental capabilities and resources to counter insider threats, and make recommendations on program improvements and resources

Low cost MATLAB-based pulse oximeter for deployment in research and development applications.

Science.gov (United States)

Shokouhian, M; Morling, R C S; Kale, I

2013-01-01

Problems such as motion artifact and effects of ambient lights have forced developers to design different signal processing techniques and algorithms to increase the reliability and accuracy of the conventional pulse oximeter device. To evaluate the robustness of these techniques, they are applied either to recorded data or are implemented on chip to be applied to real-time data. Recorded data is the most common method of evaluating however it is not as reliable as real-time measurements. On the other hand, hardware implementation can be both expensive and time consuming. This paper presents a low cost MATLAB-based pulse oximeter that can be used for rapid evaluation of newly developed signal processing techniques and algorithms. Flexibility to apply different signal processing techniques, providing both processed and unprocessed data along with low implementation cost are the important features of this design which makes it ideal for research and development purposes, as well as commercial, hospital and healthcare application.

Mechanical design of a low cost parabolic solar dish concentrator

Directory of Open Access Journals (Sweden)

Hamza Hijazi

2016-03-01

Full Text Available The objective of this research was to design a low cost parabolic solar dish concentrator with small-to moderate size for direct electricity generation. Such model can be installed in rural areas which are not connected to governmental grid. Three diameters of the dish; 5, 10 and 20 m are investigated and the focal point to dish diameter ratio is set to be 0.3 in all studied cases. Special attention is given to the selection of the appropriate dimensions of the reflecting surfaces to be cut from the available sheets in the market aiming to reduce both cutting cost and sheets cost. The dimensions of the ribs and rings which support the reflecting surface are optimized in order to minimize the entire weight of the dish while providing the minimum possible total deflection and stresses in the beams. The study applies full stress analysis of the frame of the dish using Autodesk Inventor. The study recommends to use landscape orientation for the reflective facets and increase the ribs angle and the distance between the connecting rings. The methodology presented is robust and can be extended to larger dish diameters.

Awareness of Measures for Reducing Health Risk of Using Low-Quality Irrigation Water in Morogoro, Tanzania

DEFF Research Database (Denmark)

Mayilla, Winfrida; Magayane, Flavianus; Konradsen, Flemming

2016-01-01

The study examined the awareness of farmers, vegetable traders, and consumers on the health risk reduction measures when using low-quality water in irrigated agriculture, and identifies farmers’ perceptions of the effectiveness of the health risk reduction measures. Data collection methods includ...... that health education targeting at specific exposed group and their social-demographic characteristics is the potential measure in raising awareness of the potential health risk reduction measures when using low-quality irrigation water in irrigated agriculture.......The study examined the awareness of farmers, vegetable traders, and consumers on the health risk reduction measures when using low-quality water in irrigated agriculture, and identifies farmers’ perceptions of the effectiveness of the health risk reduction measures. Data collection methods included...... a questionnaire survey with 60 farmers, 60 vegetable traders, and 70 consumers and four focus group discussions. General results show a low level of awareness of the health risk reduction measures in using low-quality irrigation water in all respondents’ categories. However, health protection measures...

Incorporating threat in hotspots and coldspots of biodiversity and ecosystem services.

Science.gov (United States)

Schröter, Matthias; Kraemer, Roland; Ceauşu, Silvia; Rusch, Graciela M

2017-11-01

Spatial prioritization could help target conservation actions directed to maintain both biodiversity and ecosystem services. We delineate hotspots and coldspots of two biodiversity conservation features and five regulating and cultural services by incorporating an indicator of 'threat', i.e. timber harvest profitability for forest areas in Telemark (Norway). We found hotspots, where high values of biodiversity, ecosystem services and threat coincide, ranging from 0.1 to 7.1% of the area, depending on varying threshold levels. Targeting of these areas for conservation follows reactive conservation approaches. In coldspots, high biodiversity and ecosystem service values coincide with low levels of threat, and cover 0.1-3.4% of the forest area. These areas might serve proactive conservation approaches at lower opportunity cost (foregone timber harvest profits). We conclude that a combination of indicators of biodiversity, ecosystem services and potential threat is an appropriate approach for spatial prioritization of proactive and reactive conservation strategies.

Hypersonic Threats to the Homeland

Science.gov (United States)

2017-03-28

ADAM) system . This ground based system protects 7 soldiers against rocket threats and utilizes a 10 kW laser with an effective range out to...early warning systems for response to hypersonic threats . The integration of directed energy defensive systems with Space Based Infrared Sensors (SBIRS...and early warning radars already in operation will save costs. By capitalizing on Terminal High Altitude Area Defense (THAAD) system capabilities

Cost-Sensitive Learning for Emotion Robust Speaker Recognition

Directory of Open Access Journals (Sweden)

Dongdong Li

2014-01-01

Full Text Available In the field of information security, voice is one of the most important parts in biometrics. Especially, with the development of voice communication through the Internet or telephone system, huge voice data resources are accessed. In speaker recognition, voiceprint can be applied as the unique password for the user to prove his/her identity. However, speech with various emotions can cause an unacceptably high error rate and aggravate the performance of speaker recognition system. This paper deals with this problem by introducing a cost-sensitive learning technology to reweight the probability of test affective utterances in the pitch envelop level, which can enhance the robustness in emotion-dependent speaker recognition effectively. Based on that technology, a new architecture of recognition system as well as its components is proposed in this paper. The experiment conducted on the Mandarin Affective Speech Corpus shows that an improvement of 8% identification rate over the traditional speaker recognition is achieved.

Cost-sensitive learning for emotion robust speaker recognition.

Science.gov (United States)

Li, Dongdong; Yang, Yingchun; Dai, Weihui

2014-01-01

In the field of information security, voice is one of the most important parts in biometrics. Especially, with the development of voice communication through the Internet or telephone system, huge voice data resources are accessed. In speaker recognition, voiceprint can be applied as the unique password for the user to prove his/her identity. However, speech with various emotions can cause an unacceptably high error rate and aggravate the performance of speaker recognition system. This paper deals with this problem by introducing a cost-sensitive learning technology to reweight the probability of test affective utterances in the pitch envelop level, which can enhance the robustness in emotion-dependent speaker recognition effectively. Based on that technology, a new architecture of recognition system as well as its components is proposed in this paper. The experiment conducted on the Mandarin Affective Speech Corpus shows that an improvement of 8% identification rate over the traditional speaker recognition is achieved.

The rise of low-cost sensing for managing air pollution in cities.

Science.gov (United States)

Kumar, Prashant; Morawska, Lidia; Martani, Claudio; Biskos, George; Neophytou, Marina; Di Sabatino, Silvana; Bell, Margaret; Norford, Leslie; Britter, Rex

2015-02-01

Ever growing populations in cities are associated with a major increase in road vehicles and air pollution. The overall high levels of urban air pollution have been shown to be of a significant risk to city dwellers. However, the impacts of very high but temporally and spatially restricted pollution, and thus exposure, are still poorly understood. Conventional approaches to air quality monitoring are based on networks of static and sparse measurement stations. However, these are prohibitively expensive to capture tempo-spatial heterogeneity and identify pollution hotspots, which is required for the development of robust real-time strategies for exposure control. Current progress in developing low-cost micro-scale sensing technology is radically changing the conventional approach to allow real-time information in a capillary form. But the question remains whether there is value in the less accurate data they generate. This article illustrates the drivers behind current rises in the use of low-cost sensors for air pollution management in cities, while addressing the major challenges for their effective implementation. Copyright © 2014 Elsevier Ltd. All rights reserved.

Costs and cost-effectiveness of pediatric inguinal hernia repair in Uganda.

Science.gov (United States)

Eeson, Gareth; Birabwa-Male, Doreen; Pennington, Mark; Blair, Geoffrey K

2015-02-01

Surgically treatable diseases contribute approximately 11% of disability-adjusted life years (DALYs) worldwide yet they remain a neglected public health priority in low- and middle-income countries (LMICs). Pediatric inguinal hernia is the most common congenital abnormality in newborns and a major cause of morbidity and mortality yet elective repair remains largely unavailable in LMICs. This study is aimed to determine the costs and cost-effectiveness of pediatric inguinal hernia repair (PIHR) in a low-resource setting. Medical costs of consecutive elective PIHRs were recorded prospectively at two centers in Uganda. Decision modeling was used to compare two different treatment scenarios (adoption of PIHR and non-adoption) from a provider perspective. A Markov model was constructed to estimate health outcomes under each scenario. The robustness of the cost-effectiveness results in the base case analysis was tested in one-way and probabilistic sensitivity analysis. The primary outcome of interest was cost per DALY averted by the intervention. Sixty-nine PIHRs were performed in 65 children (mean age 3.6 years). Mean cost per procedure was $86.68 US (95% CI 83.1-90.2 USD) and averted an average of 5.7 DALYs each. Incremental cost-effectiveness ratio was $12.41 per DALY averted. The probability of cost-effectiveness was 95% at a cost-effectiveness threshold of $35 per averted DALY. Results were robust to sensitivity analysis under all considered scenarios. Elective PIHR is highly cost-effective for the treatment and prevention of complications of hernia disease even in low-resource settings. PIHR should be prioritized in LMICs alongside other cost-effective interventions.

Detector evaluation for improved situational awareness: Receiver operator characteristic curve based

NARCIS (Netherlands)

Wuijckhuijse, A.L. van; Nieuwenhuizen, M.S.

2016-01-01

In military and civilian operations good situational awareness is a prerequisite to make proper decisions. The situational awareness is among others based upon intelligence, threat analysis and detection, altogether element of the so-called DIM (detection, identification, monitoring) system. In case

Recall of threat material is modulated by self or other referencing in people with high or low levels of non-clinical paranoia.

Science.gov (United States)

Greer, J; Smailes, D; Spencer, H; Freeston, M; Dudley, R

2016-03-01

Biased processing of negatively valenced, and particularly threat-related material plays an important role in the development of paranoid thinking. This has been demonstrated by superior memory for threat-related information in patients with persecutory delusions and in non-clinical paranoia-prone participants. This study examined how emotional material was recalled having been encoded in relation to one self or to another person, in people high or low in paranoid ideation. It was predicted that people high in paranoia would recall more threat related material about others than people low in paranoia owing to being particularly alert to threats from other people. Participants who reported high (N = 30) or low (N = 30) levels of sub-clinical paranoid thinking were presented with a series of threat-related and positive words and were asked to process them in terms of the self, or in terms of a fictional character. As predicted, when words were processed in terms of another person, the high paranoia group recalled more threat-related words than positive words, but when words had been processed in terms of the self, recall of threat-related and positive words did not differ. In contrast, there was no interaction between word-valence and referent in the low paranoia group. These findings are drawn from an analogue sample. Replication in a sample of clinical participants who report persecutory delusions is required. People high in sub-clinical paranoid ideation recalled threat preferentially in relation to other people. Such information processing biases may help understand the development and maintenance of persecutory beliefs. Copyright © 2015 Elsevier Ltd. All rights reserved.

RUASN: A Robust User Authentication Framework for Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Hoon-Jae Lee

2011-05-01

Full Text Available In recent years, wireless sensor networks (WSNs have been considered as a potential solution for real-time monitoring applications and these WSNs have potential practical impact on next generation technology too. However, WSNs could become a threat if suitable security is not considered before the deployment and if there are any loopholes in their security, which might open the door for an attacker and hence, endanger the application. User authentication is one of the most important security services to protect WSN data access from unauthorized users; it should provide both mutual authentication and session key establishment services. This paper proposes a robust user authentication framework for wireless sensor networks, based on a two-factor (password and smart card concept. This scheme facilitates many services to the users such as user anonymity, mutual authentication, secure session key establishment and it allows users to choose/update their password regularly, whenever needed. Furthermore, we have provided the formal verification using Rubin logic and compare RUASN with many existing schemes. As a result, we found that the proposed scheme possesses many advantages against popular attacks, and achieves better efficiency at low computation cost.

Robust and Cost-Efficient Communication Based on SNMP in Mobile Networks

Science.gov (United States)

Ryu, Sang-Hoon; Baik, Doo-Kwon

A main challenge in the design of this mobile network is the development of dynamic routing protocols that can efficiently find routes between two communicating nodes. Multimedia streaming services are receiving considerable interest in the mobile network business. An entire mobile network may change its point of attachment to the Internet. The mobile network is operated by a basic specification to support network mobility called Network Mobility (NEMO) Basic Support. However, NEMO basic Support mechanism has some problem in continuous communication. In this paper, we propose robust and cost-efficient algorithm. And we simulate proposed method and conclude some remarks.

Using Multi-Robot Systems for Engineering Education: Teaching and Outreach with Large Numbers of an Advanced, Low-Cost Robot

Science.gov (United States)

McLurkin, J.; Rykowski, J.; John, M.; Kaseman, Q.; Lynch, A. J.

2013-01-01

This paper describes the experiences of using an advanced, low-cost robot in science, technology, engineering, and mathematics (STEM) education. It presents three innovations: It is a powerful, cheap, robust, and small advanced personal robot; it forms the foundation of a problem-based learning curriculum; and it enables a novel multi-robot…

Environmental Pollution: An Under-recognized Threat to Children’s Health, Especially in Low- and Middle-Income Countries

Science.gov (United States)

Suk, William A.; Ahanchian, Hamid; Asante, Kwadwo Ansong; Carpenter, David O.; Diaz-Barriga, Fernando; Ha, Eun-Hee; Huo, Xia; King, Malcolm; Ruchirawat, Mathuros; da Silva, Emerson R.; Sly, Leith; Sly, Peter D.; Stein, Renato T.; van den Berg, Martin; Zar, Heather; Landrigan, Philip J.

2016-01-01

Summary Exposures to environmental pollutants during windows of developmental vulnerability in early life can cause disease and death in infancy and childhood as well as chronic, non-communicable diseases that may manifest at any point across the life span. Patterns of pollution and pollution-related disease change as countries move through economic development. Environmental pollution is now recognized as a major cause of morbidity and mortality in low- and middle-income countries (LMICs). According to the World Health Organization, pollution is responsible for 8.9 million deaths around the world each year; of these, 94% (8.4 million) are in LMICs. Toxic chemical pollution is growing into a major threat to children’s health in LMICs. The disease and disability caused by environmental pollution have great economic costs, and these costs can undercut trajectories of national development. To combat pollution, improved programs of public health and environmental protection are needed in countries at every level of development. Pollution control strategies and technologies that have been developed in high-income countries must now be transferred to LMICs to assist these emerging economies to avoid the mistakes of the past. A new international clearinghouse is needed to define and track the health effects of pollution, quantify the economic costs of these effects, and direct much needed attention to environmental pollution as a risk factor for disease. PMID:26930243

User adoption of mobile commerce in Bangladesh: Integrating perceived risk, perceived cost and personal awareness with TAM

Directory of Open Access Journals (Sweden)

Mohammed Mizanur Rahman

2017-04-01

Full Text Available This paper develops and tests a model for predicting user adoption of mobile commerce (i.e. e-commerce using mobile phones in developing countries. The model takes up the Technology Acceptance Model (TAM determinants of perceived usefulness and perceived ease of use, and extends these through the inclusion of three further determinants: perceived risk, perceived cost and personal awareness to enable prediction of the likelihood of mobile commerce adoption by users in the developing world. 575 usable surveys were gathered from the urban, semi-urban and rural areas of Bangladesh. Perceived risk and perceived usefulness were found to be the most influential factors effecting mobile commerce adoption, while the effect of perceived ease of use and personal awareness was found to be low although significant. The study reconfirmed the need of extending TAM model, in the context of mobile commerce, to address both itrs transactional and non-transactional components. Service providers need to ensure high levels of security and privacy to reduce userrs perceptions of risk. Mobile commerce services and technologies should be upgraded to world standard to make them more useful to users.

Design Margin Elimination Through Robust Timing Error Detection at Ultra-Low Voltage

OpenAIRE

Reyserhove, Hans; Dehaene, Wim

2017-01-01

This paper discusses a timing error masking-aware ARM Cortex M0 microcontroller system. Through in-path timing error detection, operation at the point-of-first-failure is possi- ble without corrupting the pipeline state, effectively eliminat- ing traditional timing margins. Error events are flagged and gathered to allow dynamic voltage scaling. The error-aware microcontroller was implemented in a 40nm CMOS process and realizes ultra-low voltage operation down to 0.29V at 5MHz consuming 12.90p...

Low energy, low cost, efficient CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Michael C. Trachtenberg; Lihong Bao; David A. Smith; Remy Dumortier [Carbozyme, Inc., Monmouth Junction, NJ (United States)

2006-07-01

This paper discusses the development and some characteristics of a new, enzyme-based, contained liquid membrane contactor to capture CO{sub 2}. The enzyme carbonic anhydrase catalyzes the removal of CO{sub 2} while the membrane contactor increases the surface area to allow the reduction of the size of the system. The modular system design is easily scaled to any required size reducing the investment costs. The system captures CO{sub 2} at a low energy and low cost promising to be a cost effective technology for CO{sub 2} capture. 5 refs., 7 figs.

Transforming Ordinary Buildings into Smart Buildings via Low-Cost, Self-Powering Wireless Sensors & Sensor Networks

Energy Technology Data Exchange (ETDEWEB)

Feng, Philip [Case Western Reserve Univ., Cleveland, OH (United States)

2017-06-09

The research objective of this project is to design and demonstrate a low-cost, compact, easy-to-deploy, maintenance-free sensor node technology, and a network of such sensors, which enable the monitoring of multiphysical parameters and can transform today’s ordinary buildings into smart buildings with environmental awareness. We develop the sensor node and network via engineering and integration of existing technologies, including high-efficiency mechanical energy harvesting, and ultralow-power integrated circuits (ICs) for sensing and wireless communication. Through integration and innovative power management via specifically designed low-power control circuits for wireless sensing applications, and tailoring energy-harvesting components to indoor applications, the target products will have smaller volume, higher efficiency, and much lower cost (in both manufacturing and maintenance) than the baseline technology. Our development and commercialization objective is to create prototypes for our target products under the CWRU-Intwine collaboration.

Information and Communication Technologies (ICT) as keys to the enhancement of public awareness about potential earth impacts

Science.gov (United States)

Usikov, Denis A.

2013-09-01

The 2007 Planetary Defense Conference recommends "to provide or enhance Internet sites to show how threats evolve and to illustrate possible action scenarios". Thereby, establishment of informational and communicational AsteroidAware web-site with the exact, authentic data about the past and the present of Earth's impact events will assist in achievement of positive results and progress in different directions on political, international, social and scientific levels. Expanded ICT's capabilities for popularization of planetary defense can help in resolving the problem of low public interest. The project's primary intent lies in popularizing the concept of planetary defenses and attracting attention to the potential dangers that threaten the Earth from outer space. The result of the efforts falling into the boundaries of this project would be an increased amount of social participation in the process of developing solutions for and increasing awareness of potential collisions between various astral bodies and the Earth. The project is also aimed at creating a foundation for the interaction between scientists and executives from around the world to facilitate international efforts of searching for fitting measures towards lowering threat levels and developing strategies revolving around united actions against potential threats.

A Robust Optimization Based Energy-Aware Virtual Network Function Placement Proposal for Small Cell 5G Networks with Mobile Edge Computing Capabilities

Directory of Open Access Journals (Sweden)

Bego Blanco

2017-01-01

Full Text Available In the context of cloud-enabled 5G radio access networks with network function virtualization capabilities, we focus on the virtual network function placement problem for a multitenant cluster of small cells that provide mobile edge computing services. Under an emerging distributed network architecture and hardware infrastructure, we employ cloud-enabled small cells that integrate microservers for virtualization execution, equipped with additional hardware appliances. We develop an energy-aware placement solution using a robust optimization approach based on service demand uncertainty in order to minimize the power consumption in the system constrained by network service latency requirements and infrastructure terms. Then, we discuss the results of the proposed placement mechanism in 5G scenarios that combine several service flavours and robust protection values. Once the impact of the service flavour and robust protection on the global power consumption of the system is analyzed, numerical results indicate that our proposal succeeds in efficiently placing the virtual network functions that compose the network services in the available hardware infrastructure while fulfilling service constraints.

Comparison of robustness to outliers between robust poisson models and log-binomial models when estimating relative risks for common binary outcomes: a simulation study.

Science.gov (United States)

Chen, Wansu; Shi, Jiaxiao; Qian, Lei; Azen, Stanley P

2014-06-26

To estimate relative risks or risk ratios for common binary outcomes, the most popular model-based methods are the robust (also known as modified) Poisson and the log-binomial regression. Of the two methods, it is believed that the log-binomial regression yields more efficient estimators because it is maximum likelihood based, while the robust Poisson model may be less affected by outliers. Evidence to support the robustness of robust Poisson models in comparison with log-binomial models is very limited. In this study a simulation was conducted to evaluate the performance of the two methods in several scenarios where outliers existed. The findings indicate that for data coming from a population where the relationship between the outcome and the covariate was in a simple form (e.g. log-linear), the two models yielded comparable biases and mean square errors. However, if the true relationship contained a higher order term, the robust Poisson models consistently outperformed the log-binomial models even when the level of contamination is low. The robust Poisson models are more robust (or less sensitive) to outliers compared to the log-binomial models when estimating relative risks or risk ratios for common binary outcomes. Users should be aware of the limitations when choosing appropriate models to estimate relative risks or risk ratios.

Security in Context-aware Mobile Business Applications

OpenAIRE

Tatli, Emin Islam

2008-01-01

The support of location computation on mobile devices (e.g. mobile phones, PDAs) has enabled the development of context-aware and especially location-aware applications (e.g. Restaurant Finder, Friend Finder) which are becoming the new trend for future software applications. However, fears regarding security and privacy are the biggest barriers against their success. Especially, mobile users are afraid of the possible threats against their private identity and personal data. Within the M-Busi...

Threat driven modeling framework using petri nets for e-learning system.

Science.gov (United States)

Khamparia, Aditya; Pandey, Babita

2016-01-01

Vulnerabilities at various levels are main cause of security risks in e-learning system. This paper presents a modified threat driven modeling framework, to identify the threats after risk assessment which requires mitigation and how to mitigate those threats. To model those threat mitigations aspects oriented stochastic petri nets are used. This paper included security metrics based on vulnerabilities present in e-learning system. The Common Vulnerability Scoring System designed to provide a normalized method for rating vulnerabilities which will be used as basis in metric definitions and calculations. A case study has been also proposed which shows the need and feasibility of using aspect oriented stochastic petri net models for threat modeling which improves reliability, consistency and robustness of the e-learning system.

A game-theoretic approach for calibration of low-cost magnetometers under noise uncertainty

Science.gov (United States)

Siddharth, S.; Ali, A. S.; El-Sheimy, N.; Goodall, C. L.; Syed, Z. F.

2012-02-01

Pedestrian heading estimation is a fundamental challenge in Global Navigation Satellite System (GNSS)-denied environments. Additionally, the heading observability considerably degrades in low-speed mode of operation (e.g. walking), making this problem even more challenging. The goal of this work is to improve the heading solution when hand-held personal/portable devices, such as cell phones, are used for positioning and to improve the heading estimation in GNSS-denied signal environments. Most smart phones are now equipped with self-contained, low cost, small size and power-efficient sensors, such as magnetometers, gyroscopes and accelerometers. A magnetometer needs calibration before it can be properly employed for navigation purposes. Magnetometers play an important role in absolute heading estimation and are embedded in many smart phones. Before the users navigate with the phone, a calibration is invoked to ensure an improved signal quality. This signal is used later in the heading estimation. In most of the magnetometer-calibration approaches, the motion modes are seldom described to achieve a robust calibration. Also, suitable calibration approaches fail to discuss the stopping criteria for calibration. In this paper, the following three topics are discussed in detail that are important to achieve proper magnetometer-calibration results and in turn the most robust heading solution for the user while taking care of the device misalignment with respect to the user: (a) game-theoretic concepts to attain better filter parameter tuning and robustness in noise uncertainty, (b) best maneuvers with focus on 3D and 2D motion modes and related challenges and (c) investigation of the calibration termination criteria leveraging the calibration robustness and efficiency.

A game-theoretic approach for calibration of low-cost magnetometers under noise uncertainty

International Nuclear Information System (INIS)

Siddharth, S; Ali, A S; El-Sheimy, N; Goodall, C L; Syed, Z F

2012-01-01

Pedestrian heading estimation is a fundamental challenge in Global Navigation Satellite System (GNSS)-denied environments. Additionally, the heading observability considerably degrades in low-speed mode of operation (e.g. walking), making this problem even more challenging. The goal of this work is to improve the heading solution when hand-held personal/portable devices, such as cell phones, are used for positioning and to improve the heading estimation in GNSS-denied signal environments. Most smart phones are now equipped with self-contained, low cost, small size and power-efficient sensors, such as magnetometers, gyroscopes and accelerometers. A magnetometer needs calibration before it can be properly employed for navigation purposes. Magnetometers play an important role in absolute heading estimation and are embedded in many smart phones. Before the users navigate with the phone, a calibration is invoked to ensure an improved signal quality. This signal is used later in the heading estimation. In most of the magnetometer-calibration approaches, the motion modes are seldom described to achieve a robust calibration. Also, suitable calibration approaches fail to discuss the stopping criteria for calibration. In this paper, the following three topics are discussed in detail that are important to achieve proper magnetometer-calibration results and in turn the most robust heading solution for the user while taking care of the device misalignment with respect to the user: (a) game-theoretic concepts to attain better filter parameter tuning and robustness in noise uncertainty, (b) best maneuvers with focus on 3D and 2D motion modes and related challenges and (c) investigation of the calibration termination criteria leveraging the calibration robustness and efficiency. (paper)

Modelling the cost-effectiveness of public awareness campaigns for the early detection of non-small-cell lung cancer.

Science.gov (United States)

Hinde, S; McKenna, C; Whyte, S; Peake, M D; Callister, M E J; Rogers, T; Sculpher, M

2015-06-30

Survival rates in lung cancer in England are significantly lower than in many similar countries. A range of Be Clear on Cancer (BCOC) campaigns have been conducted targeting lung cancer and found to improve the proportion of diagnoses at the early stage of disease. This paper considers the cost-effectiveness of such campaigns, evaluating the effect of both the regional and national BCOC campaigns on the stage distribution of non-small-cell lung cancer (NSCLC) at diagnosis. A natural history model of NSCLC was developed using incidence data, data elicited from clinical experts and model calibration techniques. This structure is used to consider the lifetime cost and quality-adjusted survival implications of the early awareness campaigns. Incremental cost-effectiveness ratios (ICERs) in terms of additional costs per quality-adjusted life-years (QALYs) gained are presented. Two scenario analyses were conducted to investigate the role of changes in the 'worried-well' population and the route of diagnosis that might occur as a result of the campaigns. The base-case theoretical model found the regional and national early awareness campaigns to be associated with QALY gains of 289 and 178 QALYs and ICERs of £13 660 and £18 173 per QALY gained, respectively. The scenarios found that increases in the 'worried-well' population may impact the cost-effectiveness conclusions. Subject to the available evidence, the analysis suggests that early awareness campaigns in lung cancer have the potential to be cost-effective. However, significant additional research is required to address many of the limitations of this study. In addition, the estimated natural history model presents previously unavailable estimates of the prevalence and rate of disease progression in the undiagnosed population.

Effects of threat management interactions on conservation priorities.

Science.gov (United States)

Auerbach, Nancy A; Wilson, Kerrie A; Tulloch, Ayesha I T; Rhodes, Jonathan R; Hanson, Jeffrey O; Possingham, Hugh P

2015-12-01

Decisions need to be made about which biodiversity management actions are undertaken to mitigate threats and about where these actions are implemented. However, management actions can interact; that is, the cost, benefit, and feasibility of one action can change when another action is undertaken. There is little guidance on how to explicitly and efficiently prioritize management for multiple threats, including deciding where to act. Integrated management could focus on one management action to abate a dominant threat or on a strategy comprising multiple actions to abate multiple threats. Furthermore management could be undertaken at sites that are in close proximity to reduce costs. We used cost-effectiveness analysis to prioritize investments in fire management, controlling invasive predators, and reducing grazing pressure in a bio-diverse region of southeastern Queensland, Australia. We compared outcomes of 5 management approaches based on different assumptions about interactions and quantified how investment needed, benefits expected, and the locations prioritized for implementation differed when interactions were taken into account. Managing for interactions altered decisions about where to invest and in which actions to invest and had the potential to deliver increased investment efficiency. Differences in high priority locations and actions were greatest between the approaches when we made different assumptions about how management actions deliver benefits through threat abatement: either all threats must be managed to conserve species or only one management action may be required. Threatened species management that does not consider interactions between actions may result in misplaced investments or misguided expectations of the effort required to mitigate threats to species. © 2015 The Authors. Conservation Biology published by Wiley Periodicals, Inc., on behalf of Society for Conservation Biology.

Low-cost carriers fare competition effect

NARCIS (Netherlands)

Carmona Benitez, R.B.; Lodewijks, G.

2010-01-01

This paper examines the effects that low-cost carriers (LCC’s) produce when entering new routes operated only by full-service carriers (FSC’s) and routes operated by low-cost carriers in competition with full-service carriers. A mathematical model has been developed to determine what routes should

Printable low-cost sensor systems for healthcare smart textiles

Science.gov (United States)

Rai, Pratyush; Kumar, Prashanth S.; Oh, Sechang; Kwon, Hyeokjun; Mathur, Gyanesh N.; Varadan, Vijay K.

2011-04-01

Smart textiles-based wearable health monitoring systems (ST-HMS) have been presented as elegant solutions to the requirements of individuals across a wide range of ages. They can be used to monitor young or elderly recuperating /convalescent patients either in hospital or at home, or they can be used by young athletes to monitor important physiological parameters to better design their training or fitness program. Business and academic interests, all over the world, have fueled a great deal of work in the development of this technology since 1990. However, two important impediments to the development of ST-HMS are:-integration of flexible electrodes, flexible sensors, signal conditioning circuits and data logging or wireless transmission devices into a seamless garment and a means to mass manufacture the same, while keeping the costs low. Roll-to-roll printing and screen printing are two low cost methods for large scale manufacturing on flexible substrates and can be extended to textiles as well. These two methods are, currently, best suited for planar structures. The sensors, integrated with wireless telemetry, facilitate development of a ST-HMS that allows for unobtrusive health monitoring. In this paper, we present our results with planar screen printable sensors based on conductive inks which can be used to monitor EKG, abdominal respiration effort, blood pressure, pulse rate and body temperature. The sensor systems were calibrated, and tested for sensitivity, reliability and robustness to ensure reuse after washing cycles.

Threat and efficacy in Malaysia’s cancer news coverage

Directory of Open Access Journals (Sweden)

Collin Jerome

2017-12-01

Full Text Available Background: The news media plays important roles not only in creating and disseminating health messages, but also in influencing people’s perceptions of health and their health behaviours. However, much more needs to be known about the creation process, particularly how health messages are created with the goal of raising awareness and knowledge, and changing people’s attitudes and behaviours. This paper presents a study aimed at examining cancer risk messages in Malaysia’s leading newspapers. Methods: Our search identified count the total 73 articles related to cancer which were published in three leading Malaysian English dailies in 2012 – September 2017. Of these, 10 were selected for a content analysis using the Extended Parallel Process (EPPM Model. The analysis focused on the presence and the levels of two important components required for designing effective health risk message: threat (severity and susceptibility and efficacy (responses efficacy and self-efficacy. The language used in the news articles was also analysed to see whether it helped enhance the threat-efficacy levels which are crucial for increasing message acceptance and yielding behaviour change. Results: Present study shows that the varying presence of threat and efficacy in the articles as evidenced by messages that focused on threat alone with no efficacy and messages that highlighted both threat and efficacy. Results also show contrasting levels of threat and efficacy as evidenced by messages that possessed high levels of threat and efficacy and messages that revealed a high level of threat and a low level of efficacy. Furthermore, the contents were composed differently in terms of language use: some articles used neutral language while others used vivid and descriptive language in addressing the topic and target audience. These have implication on message acceptance and behaviour change where high levels of threat and efficacy, and the ways in which vivid

Investigation of Fire Safety Awareness and Management in Mall

Directory of Open Access Journals (Sweden)

Abdul Rahim N.

2014-03-01

Full Text Available In spite of having sufficient fire safety system installed in buildings, the incidence of fire hazard becomes the furthermost and supreme threat to health and safety, as well as property to any community. In order to make sure that the safety of the building and its users, the fundamental features depends on the fire precaution system and equipment which should be according to the standard requirements. Nevertheless, the awareness on fire safety could necessarily alleviate the damages or rate of fatality during the event of fire. This paper presents the results on the investigation of fire safety awareness and management, concentrating on shopping mall. The endeavour of this study is to explore the level of fire safety knowledge of the users in the mall, and to study the effectiveness level of fire safety management in a mall. From the study, public awareness is highly related to understanding human behaviour and their personal background. The respondents’ levels of awareness are rather low, which reflects on their poor action when facing emergency situation during fire. The most effective methods identified to improve the awareness and effectiveness of fire safety level is through involvement in related fire safety programmes, distribution of pamphlets or brochures on fire safety and appointing specific personnel for Emergency Response Team in the mall.

A Survey on Cyber Security awareness among college students in Tamil Nadu

Science.gov (United States)

Senthilkumar, K.; Easwaramoorthy, Sathishkumar

2017-11-01

The aim of the study is to analyse the awareness of cyber security on college students in Tamil Nadu by focusing various security threats in the internet. In recent years cybercrime is an enormous challenge in all areas including national security, public safety and personal privacy. To prevent from a victim of cybercrime everyone must know about their own security and safety measures to protect by themselves. A well-structured questionnaire survey method will be applied to analyse the college student’s awareness in the area of cyber security. This survey will be going to conducted in major cities of Tamil Nadu by focusing various security threats like email, virus, phishing, fake advertisement, popup windows and other attacks in the internet. This survey examines the college students’ awareness and the level of awareness about the security issues and some suggestions are set forth to overcome these issues.

Data-Centric Situational Awareness and Management in Intelligent Power Systems

Science.gov (United States)

Dai, Xiaoxiao

The rapid development of technology and society has made the current power system a much more complicated system than ever. The request for big data based situation awareness and management becomes urgent today. In this dissertation, to respond to the grand challenge, two data-centric power system situation awareness and management approaches are proposed to address the security problems in the transmission/distribution grids and social benefits augmentation problem at the distribution-customer lever, respectively. To address the security problem in the transmission/distribution grids utilizing big data, the first approach provides a fault analysis solution based on characterization and analytics of the synchrophasor measurements. Specically, the optimal synchrophasor measurement devices selection algorithm (OSMDSA) and matching pursuit decomposition (MPD) based spatial-temporal synchrophasor data characterization method was developed to reduce data volume while preserving comprehensive information for the big data analyses. And the weighted Granger causality (WGC) method was investigated to conduct fault impact causal analysis during system disturbance for fault localization. Numerical results and comparison with other methods demonstrate the effectiveness and robustness of this analytic approach. As more social effects are becoming important considerations in power system management, the goal of situation awareness should be expanded to also include achievements in social benefits. The second approach investigates the concept and application of social energy upon the University of Denver campus grid to provide management improvement solutions for optimizing social cost. Social element--human working productivity cost, and economic element--electricity consumption cost, are both considered in the evaluation of overall social cost. Moreover, power system simulation, numerical experiments for smart building modeling, distribution level real-time pricing and social

Low-complex energy-aware image communication in visual sensor networks

Science.gov (United States)

Phamila, Yesudhas Asnath Victy; Amutha, Ramachandran

2013-10-01

A low-complex, low bit rate, energy-efficient image compression algorithm explicitly designed for resource-constrained visual sensor networks applied for surveillance, battle field, habitat monitoring, etc. is presented, where voluminous amount of image data has to be communicated over a bandwidth-limited wireless medium. The proposed method overcomes the energy limitation of individual nodes and is investigated in terms of image quality, entropy, processing time, overall energy consumption, and system lifetime. This algorithm is highly energy efficient and extremely fast since it applies energy-aware zonal binary discrete cosine transform (DCT) that computes only the few required significant coefficients and codes them using enhanced complementary Golomb Rice code without using any floating point operations. Experiments are performed using the Atmel Atmega128 and MSP430 processors to measure the resultant energy savings. Simulation results show that the proposed energy-aware fast zonal transform consumes only 0.3% of energy needed by conventional DCT. This algorithm consumes only 6% of energy needed by Independent JPEG Group (fast) version, and it suits for embedded systems requiring low power consumption. The proposed scheme is unique since it significantly enhances the lifetime of the camera sensor node and the network without any need for distributed processing as was traditionally required in existing algorithms.

low-cost apparatus from locally available materials for teaching

African Journals Online (AJOL)

unesco

twofold: i) to design and produce appropriate low cost apparatus from locally .... How are the low-cost and manufactured apparatus compared in terms of cost and efficiency? ... BASIC TOOLS FOR THE LOW COST APPARATUS PRODUCTION.

Reliability Assessment for Low-cost Unmanned Aerial Vehicles

Science.gov (United States)

Freeman, Paul Michael

algorithms to experimental faulted and unfaulted flight test data. Flight tests are conducted with actuator faults that affect the plant input and sensor faults that affect the vehicle state measurements. A model-based detection strategy is designed and uses robust linear filtering methods to reject exogenous disturbances, e.g. wind, while providing robustness to model variation. A data-driven algorithm is developed to operate exclusively on raw flight test data without physical model knowledge. The fault detection and identification performance of these complementary but different methods is compared. Together, enhanced reliability assessment and multi-pronged fault detection and identification techniques can help to bring about the next generation of reliable low-cost unmanned aircraft.

Robust Visual Tracking via Online Discriminative and Low-Rank Dictionary Learning.

Science.gov (United States)

Zhou, Tao; Liu, Fanghui; Bhaskar, Harish; Yang, Jie

2017-09-12

In this paper, we propose a novel and robust tracking framework based on online discriminative and low-rank dictionary learning. The primary aim of this paper is to obtain compact and low-rank dictionaries that can provide good discriminative representations of both target and background. We accomplish this by exploiting the recovery ability of low-rank matrices. That is if we assume that the data from the same class are linearly correlated, then the corresponding basis vectors learned from the training set of each class shall render the dictionary to become approximately low-rank. The proposed dictionary learning technique incorporates a reconstruction error that improves the reliability of classification. Also, a multiconstraint objective function is designed to enable active learning of a discriminative and robust dictionary. Further, an optimal solution is obtained by iteratively computing the dictionary, coefficients, and by simultaneously learning the classifier parameters. Finally, a simple yet effective likelihood function is implemented to estimate the optimal state of the target during tracking. Moreover, to make the dictionary adaptive to the variations of the target and background during tracking, an online update criterion is employed while learning the new dictionary. Experimental results on a publicly available benchmark dataset have demonstrated that the proposed tracking algorithm performs better than other state-of-the-art trackers.

A demonstration of a low cost approach to security at shipping facilities and ports

Science.gov (United States)

Huck, Robert C.; Al Akkoumi, Mouhammad K.; Herath, Ruchira W.; Sluss, James J., Jr.; Radhakrishnan, Sridhar; Landers, Thomas L.

2010-04-01

Government funding for the security at shipping facilities and ports is limited so there is a need for low cost scalable security systems. With over 20 million sea, truck, and rail containers entering the United States every year, these facilities pose a large risk to security. Securing these facilities and monitoring the variety of traffic that enter and leave is a major task. To accomplish this, the authors have developed and fielded a low cost fully distributed building block approach to port security at the inland Port of Catoosa in Oklahoma. Based on prior work accomplished in the design and fielding of an intelligent transportation system in the United States, functional building blocks, (e.g. Network, Camera, Sensor, Display, and Operator Console blocks) can be assembled, mixed and matched, and scaled to provide a comprehensive security system. The following functions are demonstrated and scaled through analysis and demonstration: Barge tracking, credential checking, container inventory, vehicle tracking, and situational awareness. The concept behind this research is "any operator on any console can control any device at any time."

Awareness, knowledge, and barriers to low vision services among eye care practitioners

Directory of Open Access Journals (Sweden)

Judy Jose

2016-01-01

Conclusion: The study results showed that there is a lack of awareness among eye care practitioners about low vision services, which acts as a major barrier in the effective delivery of these services.

Threat in Context: School Moderation of the Impact of Social Identity Threat on Racial/Ethnic Achievement Gaps

Science.gov (United States)

Hanselman, Paul; Bruch, Sarah K.; Gamoran, Adam; Borman, Geoffrey D.

2014-01-01

Schools with very few and relatively low-performing marginalized students may be most likely to trigger social identity threats (including stereotype threats) that contribute to racial disparities. We test this hypothesis by assessing variation in the benefits of a self-affirmation intervention designed to counteract social identity threat in a…

Low Cost Benefit Suggestions.

Science.gov (United States)

Doyel, Hoyt W.; McMillan, John D.

1980-01-01

Outlines eight low-cost employee benefits and summarizes their relative advantages. The eight include a stock ownership program, a sick leave pool, flexible working hours, production incentives, and group purchase plans. (IRT)

The space between us: stereotype threat and distance in interracial contexts.

Science.gov (United States)

Goff, Phillip Atiba; Steele, Claude M; Davies, Paul G

2008-01-01

Four studies investigate the role that stereotype threat plays in producing racial distancing behavior in an anticipated conversation paradigm. It was hypothesized that the threat of appearing racist may have the ironic effect of causing Whites to distance themselves from Black conversation partners. In Study 1, participants distanced themselves more from Black partners under conditions of threat, and this distance correlated with the activation of a "White racist" stereotype. In Study 2, it was demonstrated that Whites' interracial distancing behavior was not predicted by explicit or implicit prejudice. Study 3 provides evidence that conceiving of interracial interactions as opportunities to learn may attenuate the negative consequences of threat for Whites. Study 4 found that Whites have conscious access to their experience of stereotype threat and that this awareness may mediate the relationship between threat and distance. These results are discussed within a broader discourse of racial distancing and the possibility that certain identity threats may be as important as prejudice in determining the outcomes of interracial interactions. Copyright 2008 APA, all rights reserved.

Testing Situation Awareness Network for the Electrical Power Infrastructure

Directory of Open Access Journals (Sweden)

Rafał Leszczyna

2016-09-01

Full Text Available The contemporary electrical power infrastructure is exposed to new types of threats. The cause of such threats is related to the large number of new vulnerabilities and architectural weaknesses introduced by the extensive use of Information and communication Technologies (ICT in such complex critical systems. The power grid interconnection with the Internet exposes the grid to new types of attacks, such as Advanced Persistent Threats (APT or Distributed-Denial-ofService (DDoS attacks. When addressing this situation the usual cyber security technologies are prerequisite, but not sufficient. To counter evolved and highly sophisticated threats such as the APT or DDoS, state-of-the-art technologies including Security Incident and Event Management (SIEM systems, extended Intrusion Detection/Prevention Systems (IDS/IPS and Trusted Platform Modules (TPM are required. Developing and deploying extensive ICT infrastructure that supports wide situational awareness and allows precise command and control is also necessary. In this paper the results of testing the Situational Awareness Network (SAN designed for the energy sector are presented. The purpose of the tests was to validate the selection of SAN components and check their operational capability in a complex test environment. During the tests’ execution appropriate interaction between the components was verified.

From Threat to Relief: Expressing Prejudice toward Atheists as a Self-Regulatory Strategy Protecting the Religious Orthodox from Threat

Science.gov (United States)

Kossowska, Małgorzata; Szwed, Paulina; Czernatowicz-Kukuczka, Aneta; Sekerdej, Maciek; Wyczesany, Miroslaw

2017-01-01

We claim that religious orthodoxy is related to prejudice toward groups that violate important values, i.e., atheists. Moreover, we suggest that expressing prejudice may efficiently reduce the threat posed by this particular group among people who hold high levels, but not low levels, of orthodox belief. We tested these assumptions in an experimental study in which, after being exposed to atheistic worldviews (value-threat manipulation), high and low orthodox participants were allowed (experimental condition) or not (control condition) to express prejudice toward atheists. Threat was operationalized by cardiovascular reactivity, i.e., heart rate (HR); the higher the HR index, the higher the threat. The results found that people who hold high (vs. low) levels of orthodox belief responded with increased HR after the threat manipulation. However, we observed decreased HR after the expression of prejudice toward atheists among highly orthodox participants compared to the control condition. We did not find this effect among people holding low levels of orthodox belief. Thus, we conclude that expressing prejudice toward this particular group may be an efficient strategy to cope with the threat posed by this group for highly orthodox people. The results are discussed in light of previous findings on religious beliefs and the self-regulatory function of prejudice. PMID:28611715

Cyber threats within civil aviation

Science.gov (United States)

Heitner, Kerri A.

Existing security policies in civil aviation do not adequately protect against evolving cyber threats. Cybersecurity has been recognized as a top priority among some aviation industry leaders. Heightened concerns regarding cyber threats and vulnerabilities surround components utilized in compliance with the Federal Aviation Administration's (FAA) Next Generation Air Transportation (NextGen) implementation. Automated Dependent Surveillance-B (ADS-B) and Electronic Flight Bags (EFB) have both been exploited through the research of experienced computer security professionals. Civil aviation is essential to international infrastructure and if its critical assets were compromised, it could pose a great risk to public safety and financial infrastructure. The purpose of this research was to raise awareness of aircraft system vulnerabilities in order to provoke change among current national and international cybersecurity policies, procedures and standards. Although the education of cyber threats is increasing in the aviation industry, there is not enough urgency when creating cybersecurity policies. This project intended to answer the following questions: What are the cyber threats to ADS-B of an aircraft in-flight? What are the cyber threats to EFB? What is the aviation industry's response to the issue of cybersecurity and in-flight safety? ADS-B remains unencrypted while the FAA's mandate to implement this system is rapidly approaching. The cyber threat of both portable and non-portable EFB's have received increased publicity, however, airlines are not responding quick enough (if at all) to create policies for the use of these devices. Collectively, the aviation industry is not being proactive enough to protect its aircraft or airport network systems. That is not to say there are not leaders in cybersecurity advancement. These proactive organizations must set the standard for the future to better protect society and it's most reliable form of transportation.

Low Cost, Low Power, High Sensitivity Magnetometer

Science.gov (United States)

2008-12-01

which are used to measure the small magnetic signals from brain. Other types of vector magnetometers are fluxgate , coil based, and magnetoresistance...concentrator with the magnetometer currently used in Army multimodal sensor systems, the Brown fluxgate . One sees the MEMS fluxgate magnetometer is...Guedes, A.; et al., 2008: Hybrid - LOW COST, LOW POWER, HIGH SENSITIVITY MAGNETOMETER A.S. Edelstein*, James E. Burnette, Greg A. Fischer, M.G

Threat Analysis : Work Package 1.2 - Expert Group on the security and resilience of Communication networks and Information systems for Smart Grids

NARCIS (Netherlands)

Luiijf, H.A.M.

2012-01-01

In order to be aware of the various threats that are relevant to Smart Grids, the team designed an all hazards threat taxonomy taking into account threats that may harm Smart Grid stakeholders. The analysis and weighting of these threats makes it easier to determine how measures can be taken in

Revolutionize Situational Awareness in Emergencies

Energy Technology Data Exchange (ETDEWEB)

Hehlen, Markus Peter [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-07-05

This report describes an integrated system that provides real-time actionable information to first responders. LANL will integrate three technologies to form an advanced predictive real-time sensor network including compact chemical and wind sensor sin low cost rugged package for outdoor installation; flexible robust communication architecture linking sensors in near-real time to globally accessible servers; and the QUIC code which predicts contamination transport and dispersal in urban environments in near real time.

Using Spread Spectrum Transform for Fast and Robust Simultaneous Measurement in Active Sensors with Multiple Emitters

DEFF Research Database (Denmark)

Harbo, Anders La-Cour; Stoustrup, Jakob

2002-01-01

We present a signal processing algorithm for making robust and simultaneous measurements in an active sensor, which has one or more emitters and a receiver, and which employs some sort of signal processing hardware. Robustness means low sensitivity to time and frequency localized disturbances......-cost active sensors....

Acceptability and feasibility of a low-cost, theory-based and co-produced intervention to reduce workplace sitting time in desk-based university employees.

Science.gov (United States)

Mackenzie, Kelly; Goyder, Elizabeth; Eves, Francis

2015-12-24

Prolonged sedentary time is linked with poor health, independent of physical activity levels. Workplace sitting significantly contributes to sedentary time, but there is limited research evaluating low-cost interventions targeting reductions in workplace sitting. Current evidence supports the use of multi-modal interventions developed using participative approaches. This study aimed to explore the acceptability and feasibility of a low-cost, co-produced, multi-modal intervention to reduce workplace sitting. The intervention was developed with eleven volunteers from a large university department in the UK using participative approaches and "brainstorming" techniques. Main components of the intervention included: emails suggesting ways to "sit less" e.g. walking and standing meetings; free reminder software to install onto computers; social media to increase awareness; workplace champions; management support; and point-of-decision prompts e.g. by lifts encouraging stair use. All staff (n = 317) were invited to take part. Seventeen participated in all aspects of the evaluation, completing pre- and post-intervention sitting logs and questionnaires. The intervention was delivered over four weeks from 7th July to 3rd August 2014. Pre- and post-intervention difference in daily workplace sitting time was presented as a mean ± standard deviation. Questionnaires were used to establish awareness of the intervention and its various elements, and to collect qualitative data regarding intervention acceptability and feasibility. Mean baseline sitting time of 440 min/workday was reported with a mean reduction of 26 ± 54 min/workday post-intervention (n = 17, 95 % CI = -2 to 53). All participants were aware of the intervention as a whole, although there was a range of awareness for individual elements of the intervention. The intervention was generally felt to be both acceptable and feasible. Management support was perceived to be a strength, whilst specific

Lessons from the response to the threat of transfusion-transmitted vCJD in Ireland.

Science.gov (United States)

Murphy, W G

2013-09-01

By the time vCJD was first described in 1996, it was already far too late to offset further disaster from transmission of the disease by blood transfusion: almost all the humans who would be infected and infectious were already diseased. Nothing done by the blood transfusion services around that time, with the exception of excluding transfusion recipients as blood donors, would have made any useful contribution to containing the extent of the epidemic. The ability to spread emerging diseases before the problem is manifest or understood is a fixed and unavoidable feature of blood transfusion as it is practiced today. A second fixed property of blood transfusion is that the root cause of disaster is not within the control of the blood transfusion universe. Strategies that have emerged to cope with similar threat in other enterprises that also contain these properties comprise the components of robust design: surveillance, preparedness for action, engagement, herding together, evasion or avoidance, early adoption of potentially useful measures, engineered resilience, defence in depth, damage limitation including modularity and removal of feedback loops, and contingency, redundancy and failure management, and ultimately, individual escape. Early adoption of leucodepletion based on the possibility that it might work rather than any hard evidence was a good example of threat management. Exclusion of previously transfused donors is a robust mechanism for containing any future infection; optimal blood use structures that provide a national transfusion rate as low as possible also constitute an effective threat management strategy. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Light-emitting Ga-oxide nanocrystals in glass: a new paradigm for low-cost and robust UV-to-visible solar-blind converters and UV emitters.

Science.gov (United States)

Sigaev, Vladimir N; Golubev, Nikita V; Ignat'eva, Elena S; Paleari, Alberto; Lorenzi, Roberto

2014-01-01

Wide-bandgap nanocrystals are an inexhaustible source of tuneable functions potentially addressing most of the demand for new light emitting systems. However, the implementation of nanocrystal properties in real devices is not straightforward if a robust and stable optical component is required as a final result. The achievement of efficient light emission from dense dispersions of Ga-oxide nanocrystals in UV-grade glass can be a breakthrough in this regard. Such a result would permit the fabrication of low cost UV-to-visible converters for monitoring UV-emitting events on a large-scale - from invisible hydrogen flames to corona dispersions. From this perspective, γ-Ga₂O₃ nanocrystals are developed by phase separation in Ga-alkali-germanosilicate glasses, obtaining optical materials based on a UV transparent matrix. Band-to-band UV-excitation of light emission from donor-acceptor pair (DAP) recombination is investigated for the first time in embedded γ-Ga₂O₃. The analysis of the decay kinetics gives unprecedented evidence that nanosized confinement of DAP recombination can force a nanophase to the efficient response of exactly balanced DAPs. The results, including a proof of concept of UV-to-visible viewer, definitely demonstrate the feasibility of workable glass-based fully inorganic nanostructured materials with emission properties borrowed from Ga₂O₃ single-crystals and tailored by the nanocrystal size.

Low-cost satellite mechanical design and construction

Science.gov (United States)

Boisjolie-Gair, Nathaniel; Straub, Jeremy

2017-05-01

This paper presents a discussion of techniques for low-cost design and construction of a CubeSat mechanical structure that can serve as a basis for academic programs and a starting point for government, military and commercial large-scale sensing networks, where the cost of each node must be minimized to facilitate system affordability and lower the cost and associated risk of losing any node. Spacecraft Design plays a large role in manufacturability. An intentionally simplified mechanical design is presented which reduces machining costs, as compared to more intricate designs that were considered. Several fabrication approaches are evaluated relative to the low-cost goal.

An effective ALARA [As Low As Reasonably Achievable] Awareness Program

International Nuclear Information System (INIS)

Aldridge, T.L.; Hammond, D.A.

1990-10-01

Following the January 1, 1989 issue of the US Department of Energy (DOE) revised Order 5480.1, Chapter XI (DOE 1985), the Westinghouse Hanford Company (Westinghouse Hanford) As Low As Reasonably Achievable (ALARA) Program Office (APO) began an aggressive ALARA Awareness Campaign. The revised DOE Order 5480.11 (DOE 1988) required the documentation and tracking of ALARA practices and principles. This major challenge for compliance to the new requirements necessitated an enhanced awareness of the goals and objectives of the APO. The Westinghouse Hanford APO began the expansion of the ALARA Program. The ''classic concept'' of radiological exposure minimization, which began in the early 1940's, increased in scope to include the new concept of exposure minimization for all hazardous materials and conditions commensurate with sound economics and operating practices. This expansion could only be implemented by bringing about a cultural change. Therefore, the attempt to introduce this change in thinking created a second major challenge for the Westinghouse Hanford APO. The direct result of the identification of these two major goals was the creation of an effective ALARA Awareness for Westinghouse Hanford. This paper describes this program. 3 refs

Attitude Determination Method by Fusing Single Antenna GPS and Low Cost MEMS Sensors Using Intelligent Kalman Filter Algorithm

Directory of Open Access Journals (Sweden)

Lei Wang

2017-01-01

Full Text Available For meeting the demands of cost and size for micronavigation system, a combined attitude determination approach with sensor fusion algorithm and intelligent Kalman filter (IKF on low cost Micro-Electro-Mechanical System (MEMS gyroscope, accelerometer, and magnetometer and single antenna Global Positioning System (GPS is proposed. The effective calibration method is performed to compensate the effect of errors in low cost MEMS Inertial Measurement Unit (IMU. The different control strategies fusing the MEMS multisensors are designed. The yaw angle fusing gyroscope, accelerometer, and magnetometer algorithm is estimated accurately under GPS failure and unavailable sideslip situations. For resolving robust control and characters of the uncertain noise statistics influence, the high gain scale of IKF is adjusted by fuzzy controller in the transition process and steady state to achieve faster convergence and accurate estimation. The experiments comparing different MEMS sensors and fusion algorithms are implemented to verify the validity of the proposed approach.

A Reconfigurable Buck, Boost, and Buck-Boost Converter: Unified Model and Robust Controller

Directory of Open Access Journals (Sweden)

Martín Antonio Rodríguez Licea

2018-01-01

Full Text Available The need for reconfigurable, high power density, and low-cost configurations of DC-DC power electronic converters (PEC in areas such as the transport electrification and the use of renewable energy has spread out the requirement to incorporate in a single circuit several topologies, which generally result in an increment of complexity about the modeling, control, and stability analyses. In this paper, a reconfigurable topology is presented which can be applied in alterative/changing power conversion scenarios and consists of a reconfigurable Buck, Boost, and Buck-Boost DC-DC converter (RBBC. A unified averaged model of the RBBC is obtained, a robust controller is designed through a polytopic representation, and a Lyapunov based switched stability analysis of the closed-loop system is presented. The reported RBBC provides a wide range of voltage operation, theoretically from -∞ to ∞ volts with a single power source. Robust stability, even under arbitrarily fast (bounded parameter variations and reconfiguration changes, is reported including numerical and experimental results. The main advantages of the converter and the robust controller proposed are simple design, robustness against abrupt changes in the parameters, and low cost.

MoS2: a two-dimensional hole-transporting material for high-efficiency, low-cost perovskite solar cells

Science.gov (United States)

Kohnehpoushi, Saman; Nazari, Pariya; Abdollahi Nejand, Bahram; Eskandari, Mehdi

2018-05-01

In this work MoS2 thin film was studied as a potential two-dimensional (2D) hole-transporting material for fabrication of low-cost, durable and efficient perovskite solar cells. The thickness of MoS2 was studied as a potential factor in reaching high power conversion efficiency in perovskite solar cells. The thickness of the perovskite layer and the different metal back contacts gave distinct photovoltaic properties to the designed cells. The results show that a single sheet of MoS2 could considerably improve the power conversion efficacy of the device from 10.41% for a hole transport material (HTM)-free device to 20.43% for a device prepared with a 0.67 nm thick MoS2 layer as a HTM. On the back, Ag and Al collected the carriers more efficiently than Au due to the value of their metal contact work function with the TiO2 conduction band. The present work proposes a new architecture for the fabrication of low-cost, durable and efficient perovskite solar cells made from a low-cost and robust inorganic HTM and electron transport material.

Low-cost microwave radiometry for remote sensing of soil moisture

Science.gov (United States)

Chikando, Eric Ndjoukwe

2007-12-01

Remote sensing is now widely regarded as a dominant means of studying the Earth and its surrounding atmosphere. This science is based on blackbody theory, which states that all objects emit broadband electromagnetic radiation proportional to their temperature. This thermal emission is detectable by radiometers---highly sensitive receivers capable of measuring extremely low power radiation across a continuum of frequencies. In the particular case of a soil surface, one important parameter affecting the emitted radiation is the amount of water content or, soil moisture. A high degree of precision is required when estimating soil moisture in order to yield accurate forecasting of precipitations and short-term climate variability such as storms and hurricanes. Rapid progress within the remote sensing community in tackling current limitations necessitates an awareness of the general public towards the benefits of the science. Information about remote sensing instrumentation and techniques remain inaccessible to many higher-education institutions due to the high cost of instrumentation and the current general inaccessibility of the science. In an effort to draw more talent within the field, more affordable and reliable scientific instrumentation are needed. This dissertation introduces the first low-cost handheld microwave instrumentation fully capable of surface soil moisture studies. The framework of this research is two-fold. First, the development of a low-cost handheld microwave radiometer using the well-known Dicke configuration is examined. The instrument features a super-heterodyne architecture and is designed following a microwave integrated circuit (MIC) system approach. Validation of the instrument is performed by applying it to various soil targets and comparing measurement results to gravimetric technique measured data; a proven scientific method for determining volumetric soil moisture content. Second, the development of a fully functional receiver RF front

easySTORM: a robust, lower-cost approach to localisation and TIRF microscopy.

Science.gov (United States)

Kwakwa, Kwasi; Savell, Alexander; Davies, Timothy; Munro, Ian; Parrinello, Simona; Purbhoo, Marco A; Dunsby, Chris; Neil, Mark A A; French, Paul M W

2016-09-01

TIRF and STORM microscopy are super-resolving fluorescence imaging modalities for which current implementations on standard microscopes can present significant complexity and cost. We present a straightforward and low-cost approach to implement STORM and TIRF taking advantage of multimode optical fibres and multimode diode lasers to provide the required excitation light. Combined with open source software and relatively simple protocols to prepare samples for STORM, including the use of Vectashield for non-TIRF imaging, this approach enables TIRF and STORM imaging of cells labelled with appropriate dyes or expressing suitable fluorescent proteins to become widely accessible at low cost. © 2016 The Authors. Journal of Biophotonics published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Low Cost Integrated Navigation System for Unmanned Vessel

Directory of Open Access Journals (Sweden)

Yang Changsong

2017-11-01

Full Text Available Large errors of low-cost MEMS inertial measurement unit (MIMU lead to huge navigation errors, even wrong navigation information. An integrated navigation system for unmanned vessel is proposed. It consists of a low-cost MIMU and Doppler velocity sonar (DVS. This paper presents an integrated navigation method, to improve the performance of navigation system. The integrated navigation system is tested using simulation and semi-physical simulation experiments, whose results show that attitude, velocity and position accuracy has improved awfully, giving exactly accurate navigation results. By means of the combination of low-cost MIMU and DVS, the proposed system is able to overcome fast drift problems of the low cost IMU.

A self-synchronizing and low-cost structural health monitoring scheme based on zero crossing detection

International Nuclear Information System (INIS)

Guyomar, Daniel; Lallart, Mickaël; Li, Kaixiang; Gauthier, Jean-Yves; Monnier, Thomas

2010-01-01

Owing to their high specific strength and stiffness, composite materials are increasingly being used in aeronautics and astronautics, but such materials are vulnerable to impact damage and delamination. Structural health monitoring (SHM) techniques have been developed for detecting such defects in recent years. In situ, self-powered and low-cost SHM systems are a developmental tendency of this technique. This paper introduces the principles of a low-cost and self-synchronizing scheme for SHM. Based on the Lamb wave interactions with the structure, the proposed technique relies on detecting zero crossing time instants in order to derive an estimation of the structural state. It is shown that such a method provides a very simple and low-cost way to assess the structural integrity while being computationally efficient. Experimental investigations carried out on a composite plate with an increasing penetration hold validating the proposed technique show its effectiveness for detecting the damage. The proposed approach has also been applied on an aircraft outboard flap to detect the impact damage. The robustness is discussed versus time-shift and magnitude jitter assumptions by using the plate case. The temperature effect is also considered by defining a coefficient array in order to compensate for the material property changes. Finally, an embedded implementation of such a SHM technique is presented by using the proposed damage index

Low-cost real-time automatic wheel classification system

Science.gov (United States)

Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

1992-11-01

This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.

Low cost 3D-printing used in an undergraduate project: an integrating sphere for measurement of photoluminescence quantum yield

International Nuclear Information System (INIS)

Tomes, John J; Finlayson, Chris E

2016-01-01

We report upon the exploitation of the latest 3D printing technologies to provide low-cost instrumentation solutions, for use in an undergraduate level final-year project. The project addresses prescient research issues in optoelectronics, which would otherwise be inaccessible to such undergraduate student projects. The experimental use of an integrating sphere in conjunction with a desktop spectrometer presents opportunities to use easily handled, low cost materials as a means to illustrate many areas of physics such as spectroscopy, lasers, optics, simple circuits, black body radiation and data gathering. Presented here is a 3rd year undergraduate physics project which developed a low cost (£25) method to manufacture an experimentally accurate integrating sphere by 3D printing. Details are given of both a homemade internal reflectance coating formulated from readily available materials, and a robust instrument calibration method using a tungsten bulb. The instrument is demonstrated to give accurate and reproducible experimental measurements of luminescence quantum yield of various semiconducting fluorophores, in excellent agreement with literature values. (paper)

Low cost 3D-printing used in an undergraduate project: an integrating sphere for measurement of photoluminescence quantum yield

Science.gov (United States)

Tomes, John J.; Finlayson, Chris E.

2016-09-01

We report upon the exploitation of the latest 3D printing technologies to provide low-cost instrumentation solutions, for use in an undergraduate level final-year project. The project addresses prescient research issues in optoelectronics, which would otherwise be inaccessible to such undergraduate student projects. The experimental use of an integrating sphere in conjunction with a desktop spectrometer presents opportunities to use easily handled, low cost materials as a means to illustrate many areas of physics such as spectroscopy, lasers, optics, simple circuits, black body radiation and data gathering. Presented here is a 3rd year undergraduate physics project which developed a low cost (£25) method to manufacture an experimentally accurate integrating sphere by 3D printing. Details are given of both a homemade internal reflectance coating formulated from readily available materials, and a robust instrument calibration method using a tungsten bulb. The instrument is demonstrated to give accurate and reproducible experimental measurements of luminescence quantum yield of various semiconducting fluorophores, in excellent agreement with literature values.

A Low-Cost, Simplified Platform of Interchangeable, Ambient Ionization Sources for Rapid, Forensic Evidence Screening on Portable Mass Spectrometric Instrumentation

Directory of Open Access Journals (Sweden)

Patrick W. Fedick

2018-03-01

Full Text Available Portable mass spectrometers (MS are becoming more prevalent due to improved instrumentation, commercialization, and the robustness of new ionization methodologies. To increase utility towards diverse field-based applications, there is an inherent need for rugged ionization source platforms that are simple, yet robust towards analytical scenarios that may arise. Ambient ionization methodologies have evolved to target specific real-world problems and fulfill requirements of the analysis at hand. Ambient ionization techniques continue to advance towards higher performance, with specific sources showing variable proficiency depending on application area. To realize the full potential and applicability of ambient ionization methods, a selection of sources may be more prudent, showing a need for a low-cost, flexible ionization source platform. This manuscript describes a centralized system that was developed for portable MS systems that incorporates modular, rapidly-interchangeable ionization sources comprised of low-cost, commercially-available parts. Herein, design considerations are reported for a suite of ambient ionization sources that can be crafted with minimal machining or customization. Representative spectral data is included to demonstrate applicability towards field processing of forensic evidence. While this platform is demonstrated on portable instrumentation, retrofitting to lab-scale MS systems is anticipated.

The OPEnSampler: A Low-Cost, Low-Weight, Customizable and Modular Open Source 24-Unit Automatic Water Sampler

Science.gov (United States)

Nelke, M.; Selker, J. S.; Udell, C.

2017-12-01

Reliable automatic water samplers allow repetitive sampling of various water sources over long periods of time without requiring a researcher on site, reducing human error as well as the monetary and time costs of traveling to the field, particularly when the scale of the sample period is hours or days. The high fixed cost of buying a commercial sampler with little customizability can be a barrier to research requiring repetitive samples, such as the analysis of septic water pre- and post-treatment. DIY automatic samplers proposed in the past sacrifice maximum volume, customizability, or scope of applications, among other features, in exchange for a lower net cost. The purpose of this project was to develop a low-cost, highly customizable, robust water sampler that is capable of sampling many sources of water for various analytes. A lightweight aluminum-extrusion frame was designed and assembled, chosen for its mounting system, strength, and low cost. Water is drawn from two peristaltic pumps through silicone tubing and directed into 24 foil-lined 250mL bags using solenoid valves. A programmable Arduino Uno microcontroller connected to a circuit board communicates with a battery operated real-time clock, initiating sampling stages. Period and volume settings are programmable in-field by the user via serial commands. The OPEnSampler is an open design, allowing the user to decide what components to use and the modular theme of the frame allows fast mounting of new manufactured or 3D printed components. The 24-bag system weighs less than 10kg and the material cost is under $450. Up to 6L of sample water can be drawn at a rate of 100mL/minute in either direction. Faster flowrates are achieved by using more powerful peristaltic pumps. Future design changes could allow a greater maximum volume by filling the unused space with more containers and adding GSM communications to send real time status information.

Hantaviruses: an emerging public health threat in India? A review

Indian Academy of Sciences (India)

PRAKASH KUMAR

is to increase awareness of these emerging pathogens and the threats they pose to the public health system. [Chandy S, Abraham P and ..... distribution of the hosts through international shipping routes. The majority of SEOV-related .... Dalrymple J M 1994 Serological relationships among viruses in the Hantavirus genus, ...

The Great Society: An Introduction to Stereotype Threat and Social Perceptions

Science.gov (United States)

Shackelford, R.; Ali, N. A.; Mendez, B.; Meinke, B. K.

2015-11-01

This workshop introduced the concept of stereotype threat, in which an individual's academic performance is affected by awareness of stereotypes. We explored how stereotype threat builds into perceptions and creates contradictions in our society that can impact work with particular groups, with an emphasis on working with Afro-American and urban audiences. Through the “The Great Society” activity, participants worked in groups to develop aesthetics and taboos for fictional societies. We discussed the ways in which each group's values are compatible and conflicting, how they influence our perceptions of self and others, and how similar interactions may be experienced while working with diverse audiences in earth and space science education and outreach efforts. This workshop sought to give participants a conceptual framework for cultivating awareness of their own and their audience's perceptions, which can then be used to work with cultural sensitivity with diverse audiences.

Risk, Robustness and Water Resources Planning Under Uncertainty

Science.gov (United States)

Borgomeo, Edoardo; Mortazavi-Naeini, Mohammad; Hall, Jim W.; Guillod, Benoit P.

2018-03-01

Risk-based water resources planning is based on the premise that water managers should invest up to the point where the marginal benefit of risk reduction equals the marginal cost of achieving that benefit. However, this cost-benefit approach may not guarantee robustness under uncertain future conditions, for instance under climatic changes. In this paper, we expand risk-based decision analysis to explore possible ways of enhancing robustness in engineered water resources systems under different risk attitudes. Risk is measured as the expected annual cost of water use restrictions, while robustness is interpreted in the decision-theoretic sense as the ability of a water resource system to maintain performance—expressed as a tolerable risk of water use restrictions—under a wide range of possible future conditions. Linking risk attitudes with robustness allows stakeholders to explicitly trade-off incremental increases in robustness with investment costs for a given level of risk. We illustrate the framework through a case study of London's water supply system using state-of-the -art regional climate simulations to inform the estimation of risk and robustness.

SUMIRAD: a near real-time MMW radiometer imaging system for threat detection in an urban environment

Science.gov (United States)

Dill, Stephan; Peichl, Markus; Rudolf, Daniel

2012-10-01

The armed forces are nowadays confronted with a wide variety of types of operations. During peace keeping missions in an urban environment, where small units patrol the streets with armored vehicles, the team leader is confronted with a very complex threat situation. The asymmetric imminence arises in most cases from so called IEDs (Improvised explosive devices) which are found in a multitude of versions. In order to avoid risky situations the early detection of possible threats due to advanced reconnaissance and surveillance sensors will provide an important advantage. A European consortium consisting of GMV S.A. (Spain, "Grupo Tecnològico e Industrial"), RMA (Belgium, "Royal Military Academy"), TUM ("Technische Universität München") and DLR (Germany, "Deutsches Zentrum für Luft- und Raumfahrt") developed in the SUM project (Surveillance in an urban environment using mobile sensors) a low-cost multi-sensor vehicle based surveillance system in order to enhance situational awareness for moving security and military patrols as well as for static checkpoints. The project was funded by the European Defense Agency (EDA) in the Joint Investment Program on Force Protection (JIP-FP). The SUMIRAD (SUM imaging radiometer) system, developed by DLR, is a fast radiometric imager and part of the SUM sensor suite. This paper will present the principle of the SUMIRAD system and its key components. Furthermore the image processing will be described. Imaging results from several measurement campaigns will be presented. The overall SUM system and the individual subsystems are presented in more detail in separate papers during this conference.

Real-time implementation of a 1.25-Gbit/s DMT transmitter for robust and low-cost LED-based plastic optical fiber applications

NARCIS (Netherlands)

Lee, S.C.J.; Breyer, F.; Cárdenas, D.; Randel, S.; Koonen, A.M.J.

2009-01-01

Real-time implementation of a DMT transmitter in FPGA is demonstrated for low-cost, standard 1-mm step-index plastic optical fiber applications based on commercial resonant-cavity LED and large-diameter (540 µm) photodiode.

A structured approach to increase situational awareness in low voltage distribution grids

NARCIS (Netherlands)

Helmholt, K.A.; Groote Schaarsberg, M.; Broersma, T.; Morren, J.; Kruizinga, B.; Wouters, P.A.A.F.; Steennis, E.F.; Baldinger, F.

2015-01-01

Wear and tear, electrification and aging of (low voltage) distribution grids require maintenance in order to assure continuous provision of electricity. Situational awareness is required to find out when parts of the grid need maintenance and which parts should be prioritized. The paper proposes a

Energy literacy, awareness, and conservation behavior of residential households

International Nuclear Information System (INIS)

Brounen, Dirk; Kok, Nils; Quigley, John M.

2013-01-01

The residential sector accounts for one-fifth of global energy consumption, resulting from the requirements to heat, cool, and light residential dwellings. It is therefore not surprising that energy efficiency in the residential market has gained importance in recent years. In this paper, we examine awareness, literacy and behavior of households with respect to their residential energy expenditures. Using a detailed survey of 1721 Dutch households, we measure the extent to which consumers are aware of their energy consumption and whether they have taken measures to reduce their energy costs. Our results show that “energy literacy” and awareness among respondents is low: just 56% of the respondents are aware of their monthly charges for energy consumption, and 40% do not appropriately evaluate investment decisions in energy efficient equipment. We document that demographics and consumer attitudes towards energy conservation, but not energy literacy and awareness, have direct effects on behavior regarding heating and cooling of the home. The impact of a moderating factor, measured by thermostat settings, ultimately results in strong variation in the energy consumption of private consumers. - Highlights: • We use a detailed survey of 1,721 Dutch households to measure awareness and conservation behavior in energy consumption. • Energy literacy and awareness among residential households is low. • 40 percent of the sample does not appropriately evaluate investment decisions in energy efficient equipment • Demographics and consumer attitudes affect behavior regarding heating and cooling of a home

Interrupting behaviour: Minimizing decision costs via temporal commitment and low-level interrupts

Science.gov (United States)

Dayan, Peter

2018-01-01

Ideal decision-makers should constantly assess all sources of information about opportunities and threats, and be able to redetermine their choices promptly in the face of change. However, perpetual monitoring and reassessment impose inordinate sensing and computational costs, making them impractical for animals and machines alike. The obvious alternative of committing for extended periods of time to limited sensory strategies associated with particular courses of action can be dangerous and wasteful. Here, we explore the intermediate possibility of making provisional temporal commitments whilst admitting interruption based on limited broader observation. We simulate foraging under threat of predation to elucidate the benefits of such a scheme. We relate our results to diseases of distractibility and roving attention, and consider mechanistic substrates such as noradrenergic neuromodulation. PMID:29338004

Interrupting behaviour: Minimizing decision costs via temporal commitment and low-level interrupts.

Science.gov (United States)

Lloyd, Kevin; Dayan, Peter

2018-01-01

Ideal decision-makers should constantly assess all sources of information about opportunities and threats, and be able to redetermine their choices promptly in the face of change. However, perpetual monitoring and reassessment impose inordinate sensing and computational costs, making them impractical for animals and machines alike. The obvious alternative of committing for extended periods of time to limited sensory strategies associated with particular courses of action can be dangerous and wasteful. Here, we explore the intermediate possibility of making provisional temporal commitments whilst admitting interruption based on limited broader observation. We simulate foraging under threat of predation to elucidate the benefits of such a scheme. We relate our results to diseases of distractibility and roving attention, and consider mechanistic substrates such as noradrenergic neuromodulation.

Interrupting behaviour: Minimizing decision costs via temporal commitment and low-level interrupts.

Directory of Open Access Journals (Sweden)

Kevin Lloyd

2018-01-01

Full Text Available Ideal decision-makers should constantly assess all sources of information about opportunities and threats, and be able to redetermine their choices promptly in the face of change. However, perpetual monitoring and reassessment impose inordinate sensing and computational costs, making them impractical for animals and machines alike. The obvious alternative of committing for extended periods of time to limited sensory strategies associated with particular courses of action can be dangerous and wasteful. Here, we explore the intermediate possibility of making provisional temporal commitments whilst admitting interruption based on limited broader observation. We simulate foraging under threat of predation to elucidate the benefits of such a scheme. We relate our results to diseases of distractibility and roving attention, and consider mechanistic substrates such as noradrenergic neuromodulation.

Development of a music therapy assessment tool for patients in low awareness states.

Science.gov (United States)

Magee, Wendy L

2007-01-01

People in low awareness states following profound brain injury typically demonstrate subtle changes in functional behaviors which challenge the sensitivity of measurement tools. Failure to identify and measure changes in functioning can lead to misdiagnosis and withdrawal of treatment with this population. Thus, the development of tools which are sensitive to responsiveness is of central concern. As the auditory modality has been found to be particularly sensitive in identifying responses indicating awareness, a convincing case can be made for music therapy as a treatment medium. However, little has been recommended about protocols for intervention or tools for measuring patient responses within the music therapy setting. This paper presents the rationale for an assessment tool specifically designed to measure responses in the music therapy setting with patients who are diagnosed as minimally conscious or in a vegetative state. Developed over fourteen years as part of interdisciplinary assessment and treatment, the music therapy assessment tool for low awareness states (MATLAS) contains fourteen items which rate behavioral responses across a number of domains. The tool can provide important information for interdisciplinary assessment and treatment particularly in the auditory and communication domains. Recommendations are made for testing its reliability and validity through research.

Efficiency and cost effectiveness of retrofitting ventilation in low-rise housing

International Nuclear Information System (INIS)

Bowser, D.; Fugler, D.

2000-01-01

Effective and inexpensive ventilation systems that can be retrofitted to existing low-rise housing to improve indoor air quality in existing housing stock is discussed. In a project by CMHC ten retrofit ventilation systems in single family residential buildings were tested in an effort to identify homes with specific indoor air quality concerns and to evaluate the performance of these retrofit systems by monitoring air quality before and after installation. Measurements were taken over a two-to-three day period with normal occupancy. In one case radon contamination was also measured directly before and after the retrofit. Cost estimates were based on capital, operating and maintenance expenses. This paper describes the results of three sample case studies. One of these involved a home with high concentration of radon gas. The recommended solution was fan-assisted removal of soil gases as the only way to ensure substantial reductions in concentration. Cost of the system was $2,450, plus $79 annual operating expenses. The second case involved a basement apartment with odour and moisture build-up. To solve the problem, an exhaust-only ventilation system with multiple pick-up points was installed at a cost of $750. Annual operating costs are estimated at $171. The third case study described a dwelling with windows and exhaust ducts showing condensation and mold on the bathroom ceiling. Balanced mechanical ventilation via an HRV was installed to exhaust the moist air from the house and to supply fresh dry air. In this case cost of the system was $1,345 installed, plus annual operating costs of $117. It was stressed that different houses have different requirements. Therefore it is important to be fully aware of the amount of natural ventilation a house has, prior to determining whether the solution demands additional ventilation requirements or simply redistribution. 1 ref., 3 figs

Does stereotype threat affect women in academic medicine?

Science.gov (United States)

Burgess, Diana Jill; Joseph, Anne; van Ryn, Michelle; Carnes, Molly

2012-04-01

Multiple complex factors contribute to the slow pace of women's advancement into leadership positions in academic medicine. In this article, the authors propose that stereotype threat--under which individuals who are members of a group characterized by negative stereotypes in a particular domain perform below their actual abilities in that domain when group membership is emphasized--may play an important role in the underrepresentation of women in leadership positions in academic medicine. Research to objectively assess the impact of stereotype threat for women in academic medicine is feasible and necessary to confirm this hypothesis. Still, a number of conditions present in the academic medicine community today have been shown to trigger stereotype threat in other settings, and stereotype threat fits with existing research on gender in academic medicine. In the meantime, academic health centers should implement relatively simple measures supported by experimental evidence from other settings to reduce the risk of stereotype threat, including (1) introducing the concept of stereotype threat to the academic medicine community, (2) engaging all stakeholders, male and female, to promote identity safety by enacting and making faculty aware of policies to monitor potential instances of discrimination, and training faculty to provide performance feedback that is free of gender bias, (3) counteracting the effects of sex segregation at academic health centers by increasing exposure to successful female leaders, (4) reducing gender stereotype priming by avoiding stereotypically male criteria for promotion, grants, and awards, and (5) building leadership efficacy among female physicians and scientists.

A low-cost colorimeter.

Science.gov (United States)

Jones, N B; Riley, C; Sheya, M S; Hosseinmardi, M M

1984-01-01

A need for a colorimeter with low capital and maintenance costs has been suggested for countries with foreign exchange problems and no local medical instrumentation industry. This paper puts forward a design for such a device based on a domestic light-bulb, photographic filters and photovoltaic cells. The principle of the design is the use of a balancing technique involving twin light paths for test solution and reference solution and an electronic bridge circuit. It is shown that proper selection of the components will allow the cost objectives to be met and also provide acceptable linearity, precision, accuracy and repeatability.

Forecasting Lightning Threat using Cloud-resolving Model Simulations

Science.gov (United States)

McCaul, E. W., Jr.; Goodman, S. J.; LaCasse, K. M.; Cecil, D. J.

2009-01-01

As numerical forecasts capable of resolving individual convective clouds become more common, it is of interest to see if quantitative forecasts of lightning flash rate density are possible, based on fields computed by the numerical model. Previous observational research has shown robust relationships between observed lightning flash rates and inferred updraft and large precipitation ice fields in the mixed phase regions of storms, and that these relationships might allow simulated fields to serve as proxies for lightning flash rate density. It is shown in this paper that two simple proxy fields do indeed provide reasonable and cost-effective bases for creating time-evolving maps of predicted lightning flash rate density, judging from a series of diverse simulation case study events in North Alabama for which Lightning Mapping Array data provide ground truth. One method is based on the product of upward velocity and the mixing ratio of precipitating ice hydrometeors, modeled as graupel only, in the mixed phase region of storms at the -15\\dgc\\ level, while the second method is based on the vertically integrated amounts of ice hydrometeors in each model grid column. Each method can be calibrated by comparing domainwide statistics of the peak values of simulated flash rate proxy fields against domainwide peak total lightning flash rate density data from observations. Tests show that the first method is able to capture much of the temporal variability of the lightning threat, while the second method does a better job of depicting the areal coverage of the threat. A blended solution is designed to retain most of the temporal sensitivity of the first method, while adding the improved spatial coverage of the second. Weather Research and Forecast Model simulations of selected North Alabama cases show that this model can distinguish the general character and intensity of most convective events, and that the proposed methods show promise as a means of generating

Does post-operative knee awareness differ between knees in bilateral simultaneous total knee arthroplasty? Predictors of high or low knee awareness

DEFF Research Database (Denmark)

Nielsen, Katrine Abildgaard; Thomsen, Morten Grove; Latifi, Roshan

2016-01-01

PURPOSE: To evaluate the difference in post-operative knee awareness between knees in patients undergoing bilateral simultaneous total knee arthroplasty (TKA) and to assess factors predicting high or low knee awareness. METHODS: This study was conducted on 99 bilateral simultaneous TKAs performed...... at our institution from 2008 to 2012. All patients received one set of questionnaires [Forgotten Joint Score (FJS) and Oxford Knee Score (OKS)] for each knee. Based on the FJS, the patients' knees were divided into two groups: "best" and "worst" knees. The median of the absolute difference in FJS and OKS...... within each patient was calculated. Multivariate linear regression was performed to identify factors affecting FJS. RESULTS: The difference between knees was 1 point (CI 0-5) for the FJS and 1 point (CI 0-2) for the OKS. The FJS for females increased (decreasing awareness) with increasing age. Males had...

Low Cost/Low Noise Variable Pitch Ducted Fan, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — ACI proposes a design for a Propulsor (Low Cost/Low Noise Variable Pitch Ducted Fan) that has wide application in all sectors of Aviation. Propulsor hardware of this...

Assessment of naked mole-rat distribution and threats in Eastern Ethiopia

Directory of Open Access Journals (Sweden)

Mengistu Wale

2016-08-01

Full Text Available Objective: To identify the distribution, threats and community attitudes towards naked molerat in Eastern Ethiopia. Methods: Data were collected through direct observation and interview and Chi-square at 95% confidence interval was used for significance test. Results: Naked mole-rat was identified in Fafan, City/Shinele, Eastern Hararghe Zone and Dire Dawa Administrative. The main threats of naked mole-rat identified were agricultural expansion, human killing and lack of awareness. From a total of 100 respondents, 92% of them considered naked mole-rat as pest as a result that 46% of them participated in direct killing. Literacy rate significantly affects the willingness to participate in the conservation of naked mole-rat (χ2 = 7.478, df = 1, P < 0.05. From a total of 26% respondents who did not show the willingness to participate in the conservation, 80.8% of them were illiterate. Conclusions: Naked mole-rat is fairly common in many of the study sites. However, rapid shift from nomadic life style to cultivation of crops and lacks of awareness were the main threats of naked mole-rat. Therefore, since there is no conservation action currently, further comprehensive study is required to design conservation plan for this species.

Solidification as low cost technology prior to land filling of industrial hazardous waste sludge.

Science.gov (United States)

El-Sebaie, O; Ahmed, M; Ramadan, M

2000-01-01

The aim of this study is to stabilize and solidify two different treated industrial hazardous waste sludges, which were selected from factories situated close to Alexandria. They were selected to ensure their safe transportation and landfill disposal by reducing their potential leaching of hazardous elements, which represent significant threat to the environment, especially the quality of underground water. The selected waste sludges have been characterized. Ordinary Portland Cement (OPC), Cement Kiln Dust (CKD) from Alexandria Portland Cement Company, and Calcium Sulphate as a by-product from the dye industry were used as potential solidification additives to treat the selected treated waste sludges from tanning and dyes industry. Waste sludges as well as the solidified wastes have been leach-tested, using the General Acid Neutralization Capacity (GANC) procedure. Concentration of concerning metals in the leachates was determined to assess changes in the mobility of major contaminants. The treated tannery waste sludge has an acid neutralization capacity much higher than that of the treated dyes waste sludge. Experiment results demonstrated the industrial waste sludge solidification mix designs, and presented the reduction of contaminant leaching from two types of waste sludges. The main advantages of solidification are that it is simple and low cost processing which includes readily available low cost solidification additives that will convert industrial hazardous waste sludges into inert materials.

A low-cost, hands-on module to characterize antimicrobial compounds using an interdisciplinary, biophysical approach.

Directory of Open Access Journals (Sweden)

Karishma S Kaushik

2015-01-01

Full Text Available We have developed a hands-on experimental module that combines biology experiments with a physics-based analytical model in order to characterize antimicrobial compounds. To understand antibiotic resistance, participants perform a disc diffusion assay to test the antimicrobial activity of different compounds and then apply a diffusion-based analytical model to gain insights into the behavior of the active antimicrobial component. In our experience, this module was robust, reproducible, and cost-effective, suggesting that it could be implemented in diverse settings such as undergraduate research, STEM (science, technology, engineering, and math camps, school programs, and laboratory training workshops. By providing valuable interdisciplinary research experience in science outreach and education initiatives, this module addresses the paucity of structured training or education programs that integrate diverse scientific fields. Its low-cost requirements make it especially suitable for use in resource-limited settings.

Low-Cost Servomotor Driver for PFM Control.

Science.gov (United States)

Aragon-Jurado, David; Morgado-Estevez, Arturo; Perez-Peña, Fernando

2017-12-31

Servomotors have already been around for some decades and they are extremely popular among roboticists due to their simple control technique, reliability and low-cost. They are usually controlled by using Pulse Width Modulation (PWM) and this paper aims to keep the idea of simplicity and low-cost, while introducing a new control technique: Pulse Frequency Modulation (PFM). The objective of this paper is to focus on our development of a low-cost servomotor controller which will allow the research community to use them with PFM. A low-cost commercial servomotor is used as the base system for the development: a small PCB that fits inside the case and allocates all the electronic components to control the motor has been designed to replace the original. The potentiometer is retained as the feedback sensor and a microcontroller is responsible for controlling the position of the motor. The paper compares the performance of a PWM and a PFM controlled servomotor. The comparison shows that the servomotor with our controller achieves a faster mechanism for switching targets and a lower latency. This controller can be used with neuromorphic systems to remove the conversion from events to PWM.

Low profile, low cost, new geometry integrated inductors

DEFF Research Database (Denmark)

Ouyang, Ziwei; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2011-01-01

windings with well-defined thickness. Many advantages and disadvantages are described in depth. In this work, inverse coupling and direct coupling in the new geometry integrated inductors have been analyzed. Coupling characteristic caused by a special saturation behavior has been emphasis. And also...... variable inductors caused by the special saturation behavior may be utilized in some applications. The new integrated inductors make it possible to build low-profile, low-cost, flexibility DC/DC converters, and it can be extensively designed for the low-voltage and high-current required by the modern...

How Subsurface Water Technologies (SWT) can Provide Robust, Effective, and Cost-Efficient Solutions for Freshwater Management in Coastal Zones

NARCIS (Netherlands)

Zuurbier, K.G.; Raat, K.J.; Paalman, M.; Oosterhof, A.T.; Stuyfzand, P.J.

2016-01-01

Freshwater resources in coastal zones are limited while demands are high, resulting in problems like seasonal water shortage, overexploitation of freshwater aquifers, and seawater intrusion. Three subsurface water technologies (SWT) that can provide robust, effective, and cost-efficient solutions to

Sequencing the threat and recommendation components of persuasive messages differentially improves the effectiveness of high- and low-distressing imagery in an anti-alcohol message in students.

Science.gov (United States)

Brown, Stephen L; West, Charlotte

2015-05-01

Distressing imagery is often used to improve the persuasiveness of mass-reach health promotion messages, but its effectiveness may be limited because audiences avoid attending to content. Prior self-affirmation or self-efficacy inductions have been shown to reduce avoidance and improve audience responsiveness to distressing messages, but these are difficult to introduce into a mass-reach context. Reasoning that a behavioural recommendation may have a similar effect, we reversed the traditional threat-behavioural recommendation health promotion message sequence. 2 × 2 experimental design: Factor 1, high- and low-distress images; Factor 2, threat-recommendation and recommendation-threat sequences. Ninety-one students were exposed to an identical text message accompanied by high- or low-distress imagery presented in threat-recommendation and recommendation-threat sequences. For the high-distress message, greater persuasion was observed for the recommendation-threat than the threat-recommendation sequence. This was partially mediated by participants' greater self-exposure to the threat component of the message, which we attribute to the effect of sequence in reducing attentional avoidance. For the low-distress message, greater persuasion was observed for the threat-recommendation sequence, which was not mediated by reading time allocated to the threat. Tailoring message sequence to suit the degree of distress that message developers wish to induce provides a tool that could improve persuasive messages. These findings provide a first step in this process and discuss further steps needed to consolidate and expand these findings. Statement of contribution What is already known on this subject? Health promotion messages accompanied by distressing imagery might, under some circumstances, persuade individuals to engage in healthier behaviour. Audiences can respond defensively to distressing imagery, but may be less inclined to do so when an easily followed behavioural

Frugal Biotech Applications of Low-Temperature Plasma.

Science.gov (United States)

Machala, Zdenko; Graves, David B

2017-09-01

Gas discharge low-temperature air plasma can be utilized for a variety of applications, including biomedical, at low cost. We term these applications 'frugal plasma' - an example of frugal innovation. We demonstrate how simple, robust, low-cost frugal plasma devices can be used to safely disinfect instruments, surfaces, and water. Copyright © 2017 Elsevier Ltd. All rights reserved.

The high cost of low-acuity ICU outliers.

Science.gov (United States)

Dahl, Deborah; Wojtal, Greg G; Breslow, Michael J; Holl, Randy; Huguez, Debra; Stone, David; Korpi, Gloria

2012-01-01

Direct variable costs were determined on each hospital day for all patients with an intensive care unit (ICU) stay in four Phoenix-area hospital ICUs. Average daily direct variable cost in the four ICUs ranged from $1,436 to $1,759 and represented 69.4 percent and 45.7 percent of total hospital stay cost for medical and surgical patients, respectively. Daily ICU cost and length of stay (LOS) were higher in patients with higher ICU admission acuity of illness as measured by the APACHE risk prediction methodology; 16.2 percent of patients had an ICU stay in excess of six days, and these LOS outliers accounted for 56.7 percent of total ICU cost. While higher-acuity patients were more likely to be ICU LOS outliers, 11.1 percent of low-risk patients were outliers. The low-risk group included 69.4 percent of the ICU population and accounted for 47 percent of all LOS outliers. Low-risk LOS outliers accounted for 25.3 percent of ICU cost and incurred fivefold higher hospital stay costs and mortality rates. These data suggest that severity of illness is an important determinant of daily resource consumption and LOS, regardless of whether the patient arrives in the ICU with high acuity or develops complications that increase acuity. The finding that a substantial number of long-stay patients come into the ICU with low acuity and deteriorate after ICU admission is not widely recognized and represents an important opportunity to improve patient outcomes and lower costs. ICUs should consider adding low-risk LOS data to their quality and financial performance reports.

A Low-Jitter Wireless Transmission Based on Buffer Management in Coding-Aware Routing

Directory of Open Access Journals (Sweden)

Cunbo Lu

2015-08-01

Full Text Available It is significant to reduce packet jitter for real-time applications in a wireless network. Existing coding-aware routing algorithms use the opportunistic network coding (ONC scheme in a packet coding algorithm. The ONC scheme never delays packets to wait for the arrival of a future coding opportunity. The loss of some potential coding opportunities may degrade the contribution of network coding to jitter performance. In addition, most of the existing coding-aware routing algorithms assume that all flows participating in the network have equal rate. This is unrealistic, since multi-rate environments often appear. To overcome the above problem and expand coding-aware routing to multi-rate scenarios, from the view of data transmission, we present a low-jitter wireless transmission algorithm based on buffer management (BLJCAR, which decides packets in coding node according to the queue-length based threshold policy instead of the regular ONC policy as used in existing coding-aware routing algorithms. BLJCAR is a unified framework to merge the single rate case and multiple rate case. Simulations results show that the BLJCAR algorithm embedded in coding-aware routing outperforms the traditional ONC policy in terms of jitter, packet delivery delay, packet loss ratio and network throughput in network congestion in any traffic rates.

The hack attack - Increasing computer system awareness of vulnerability threats

Science.gov (United States)

Quann, John; Belford, Peter

1987-01-01

The paper discusses the issue of electronic vulnerability of computer based systems supporting NASA Goddard Space Flight Center (GSFC) by unauthorized users. To test the security of the system and increase security awareness, NYMA, Inc. employed computer 'hackers' to attempt to infiltrate the system(s) under controlled conditions. Penetration procedures, methods, and descriptions are detailed in the paper. The procedure increased the security consciousness of GSFC management to the electronic vulnerability of the system(s).

Low-cost in vitro fertilization: current insights

Directory of Open Access Journals (Sweden)

Teoh PJ

2014-08-01

Full Text Available Pek Joo Teoh, Abha MaheshwariAberdeen Fertility Centre, Aberdeen Maternity Hospital, University of Aberdeen, Aberdeen, UKAbstract: Despite the development of in vitro fertilization (IVF more than 30 years ago, the cost of treatment remains high. Furthermore, over the years, more sophisticated technologies and expensive medications have been introduced, making IVF increasingly inaccessible despite the increasing need. Globally, the option to undergo IVF is only available to a privileged few. In recent years, there has been growing interest in exploring strategies to reduce the cost of IVF treatment, which would allow the service to be provided in low-resource settings. In this review, we explore the various ways in which the cost of this treatment can be reduced.Keywords: IVF, low-cost, accessible, developing world

Key issues for low-cost FGD installations

Energy Technology Data Exchange (ETDEWEB)

DePriest, W.; Mazurek, J.M. [Sargent & Lundy LLC, Chicago, IL (United States)

1995-12-01

This paper will discuss various methods for installing low-cost FGD systems. The paper will include a discussion of various types of FGD systems available, both wet and dry, and will compare the relative cost of each type. Important design issues, such as use of spare equipment, materials of construction, etc. will be presented. An overview of various low-cost construction techniques (i.e., modularization) will be included. This paper will draw heavily from Sargent & Lundy`s database of past and current FGD projects together with information we gathered for several Electric Power Research Institute (EPRI) studies on the subject.

Cyber Security Insider Threats :: Government’s Role in Protecting India’s Critical Infrastructure Sectors

OpenAIRE

Vohra, Pulkit

2014-01-01

This research identifies the problem of insider threats in the critical infrastructure sectors of India. It is structured to answer the research question: "Why insider threats should be the primary concern for Indian government to protect its critical infrastructure sectors.” It defines the critical infrastructure sectors and portrays the cyber security scenario of India. Also, through the research study, it identifies the lack of awareness and non-seriousness of employees in the critical sec...

Low polymer hydraulic fracturing applications in Reconcavo basin wells can reduce cost and improve conductivity

International Nuclear Information System (INIS)

Suzart, Joao Walter Pereira; Araujo, Paulo Fernando de

2000-01-01

Gels used for hydraulic-fracturing treatments generally contain high concentrations of polymer. The polymer helps the fracturing fluid achieve the level of viscosity necessary for transporting proppant through the rock matrix. However, high-polymer gels leave greater amounts of residue in the formation and can therefore cause formation damage. This paper describes how low polymer (L P) gels can be used for hydraulic-fracturing operations to reduce job costs and increase conductivity by reducing formation damage while maintaining the characteristics of a high-polymer gel. The L P fluid system has a low p H and contains an appropriate breaker concentration. Operators have achieved positive results with this system, which allows them to measure robust gel breaks and reduces the necessity for well cleaning. Consequently, formation damage can be significantly reduced. (author)

Stereotype threat in classroom settings: the interactive effect of domain identification, task difficulty and stereotype threat on female students' maths performance.

Science.gov (United States)

Keller, Johannes

2007-06-01

Stereotype threat research revealed that negative stereotypes can disrupt the performance of persons targeted by such stereotypes. This paper contributes to stereotype threat research by providing evidence that domain identification and the difficulty level of test items moderate stereotype threat effects on female students' maths performance. The study was designed to test theoretical ideas derived from stereotype threat theory and assumptions outlined in the Yerkes-Dodson law proposing a nonlinear relationship between arousal, task difficulty and performance. Participants were 108 high school students attending secondary schools. Participants worked on a test comprising maths problems of different difficulty levels. Half of the participants learned that the test had been shown to produce gender differences (stereotype threat). The other half learned that the test had been shown not to produce gender differences (no threat). The degree to which participants identify with the domain of maths was included as a quasi-experimental factor. Maths-identified female students showed performance decrements under conditions of stereotype threat. Moreover, the stereotype threat manipulation had different effects on low and high domain identifiers' performance depending on test item difficulty. On difficult items, low identifiers showed higher performance under threat (vs. no threat) whereas the reverse was true in high identifiers. This interaction effect did not emerge on easy items. Domain identification and test item difficulty are two important factors that need to be considered in the attempt to understand the impact of stereotype threat on performance.

Low cost design of microprocessor EDAC circuit

International Nuclear Information System (INIS)

Hao Li; Yu Lixin; Peng Heping; Zhuang Wei

2015-01-01

An optimization method of error detection and correction (EDAC) circuit design is proposed. The method involves selecting or constructing EDAC codes of low cost hardware, associated with operation scheduling implementation based on 2-input XOR gates structure, and two actions for reducing hardware cells, which can reduce the delay penalties and area costs of the EDAC circuit effectively. The 32-bit EDAC circuit hardware implementation is selected to make a prototype, based on the 180 nm process. The delay penalties and area costs of the EDAC circuit are evaluated. Results show that the time penalty and area cost of the EDAC circuitries are affected with different parity-check matrices and different hardware implementation for the EDAC codes with the same capability of correction and detection code. This method can be used as a guide for low-cost radiation-hardened microprocessor EDAC circuit design and for more advanced technologies. (paper)

The use of low cost compact cameras with focus stacking functionality in entomological digitization projects

Directory of Open Access Journals (Sweden)

Jan Mertens

2017-10-01

Full Text Available Digitization of specimen collections has become a key priority of many natural history museums. The camera systems built for this purpose are expensive, providing a barrier in institutes with limited funding, and therefore hampering progress. An assessment is made on whether a low cost compact camera with image stacking functionality can help expedite the digitization process in large museums or provide smaller institutes and amateur entomologists with the means to digitize their collections. Images of a professional setup were compared with the Olympus Stylus TG-4 Tough, a low-cost compact camera with internal focus stacking functions. Parameters considered include image quality, digitization speed, price, and ease-of-use. The compact camera’s image quality, although inferior to the professional setup, is exceptional considering its fourfold lower price point. Producing the image slices in the compact camera is a matter of seconds and when optimal image quality is less of a priority, the internal stacking function omits the need for dedicated stacking software altogether, further decreasing the cost and speeding up the process. In general, it is found that, aware of its limitations, this compact camera is capable of digitizing entomological collections with sufficient quality. As technology advances, more institutes and amateur entomologists will be able to easily and affordably catalogue their specimens.

Towards an automated security awareness system in a virtualized environment

CSIR Research Space (South Africa)

Labuschagne, WA

2012-07-01

Full Text Available resources. This is an efficient solution to access the Internet. However users might not be aware of the security threats that exist on using shared resources. Many companies provide security solutions to automatically protect resources on the network...

Does Stereotype Threat Affect Women in Academic Medicine?

Science.gov (United States)

Burgess, Diana Jill; Joseph, Anne; van Ryn, Michelle; Carnes, Molly

2012-01-01

Multiple complex factors contribute to the slow pace of women’s advancement into leadership positions in academic medicine. In this article, the authors propose that stereotype threat--under which individuals who are members of a group characterized by negative stereotypes in a particular domain perform below their actual abilities in that domain when group membership is emphasized--may play an important role in the underrepresentation of women in leadership positions in academic medicine. Research to objectively assess the impact of stereotype threat for women in academic medicine is feasible and necessary to confirm this hypothesis. Still, a number of conditions present in the academic medicine community today have been shown to trigger stereotype threat in other settings, and stereotype threat fits with existing research on gender in academic medicine. In the meantime, academic health centers should implement relatively simple measures supported by experimental evidence from other settings to reduce the risk of stereotype threat, including: (1) introducing the concept of stereotype threat to the academic medicine community; (2) engaging all stakeholders, male and female, to promote identity safety by enacting and making faculty aware of policies to monitor potential instances of discrimination, and training faculty to provide performance feedback that is free of gender bias; (3) counteracting the effects of sex segregation at academic health centers by increasing exposure to successful female leaders; (4) reducing gender stereotype priming by avoiding stereotypically male criteria for promotion, grants, and awards; and (5) building leadership efficacy among female physicians and scientists. PMID:22361794

Transcultural adaptation of the Breast Cancer Awareness Measure.

Science.gov (United States)

Al-Khasawneh, E M; Leocadio, M; Seshan, V; Siddiqui, S T; Khan, A N; Al-Manaseer, M M

2016-09-01

To overcome the lack of a validated and robust Arabic instrument to measure breast cancer awareness. Currently, there is no validated Arabic instrument for measuring breast cancer awareness levels. We adapted, translated and validated the Breast Cancer Awareness Measure developed by Cancer Research UK. The instrument was translated into Arabic and back-translated for validation. Validation and reliability tests were conducted using purposively sampled 972 Arab women older than 20 years, living in Oman. The adapted content was validated by a panel of medical, linguistic and cultural experts, followed by cognitive interviews (n = 10), behavioural coding (n = 30) and criterion validation (n = 646). The instrument was tested for acceptability and its subscales for internal consistency. Inter-rater reliability was estimated between two similar groups (n = 144 and n = 142) to test homogeneity. The adapted and translated instrument had a high acceptability (98.7% completed). The validation process shaped the adaptation, and resulted in strong criterion validity (R = 0.58, P Cancer Awareness Measure is a robust Arabic instrument for the measurement of breast cancer awareness and early detection practices among Arab women. The purposively selected sample may not be representative of the population. Improvement of awareness and early detection of breast cancer can contribute towards reducing mortality from the disease. The adapted instrument has policy implications, since measurement of awareness levels is essential towards breast health promotion policies in Arab countries. © 2016 International Council of Nurses.

Robustness Analysis of Timber Truss Structure

DEFF Research Database (Denmark)

Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

2010-01-01

The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

Climatic threats on the worldwide peace

International Nuclear Information System (INIS)

Valantin, J.M.

2005-06-01

This book approaches the climatic change under the international relation aspect. It recalls the progressive growth of the collective awareness about the threats of human activities on Earth's climate and analyzes more particularly the policies adopted by the US, UK and the European Union. It evokes also the problems encountered by the developing countries, the energy needs of which are continuously increasing. Finally, it puts the question of the capacity of the international community to solve, by negotiations and not by conflicts, the tensions generated by environmental crises. (J.S.)

Cybersecurity Public Sector Threats and Responses

CERN Document Server

Andreasson, Kim J

2011-01-01

The Internet has given rise to new opportunities for the public sector to improve efficiency and better serve constituents in the form of e-government. But with a rapidly growing user base globally and an increasing reliance on the Internet, digital tools are also exposing the public sector to new risks. An accessible primer, Cybersecurity: Public Sector Threats and Responses focuses on the convergence of globalization, connectivity, and the migration of public sector functions online. It identifies the challenges you need to be aware of and examines emerging trends and strategies from around

Low-rank sparse learning for robust visual tracking

KAUST Repository

Zhang, Tianzhu

2012-01-01

In this paper, we propose a new particle-filter based tracking algorithm that exploits the relationship between particles (candidate targets). By representing particles as sparse linear combinations of dictionary templates, this algorithm capitalizes on the inherent low-rank structure of particle representations that are learned jointly. As such, it casts the tracking problem as a low-rank matrix learning problem. This low-rank sparse tracker (LRST) has a number of attractive properties. (1) Since LRST adaptively updates dictionary templates, it can handle significant changes in appearance due to variations in illumination, pose, scale, etc. (2) The linear representation in LRST explicitly incorporates background templates in the dictionary and a sparse error term, which enables LRST to address the tracking drift problem and to be robust against occlusion respectively. (3) LRST is computationally attractive, since the low-rank learning problem can be efficiently solved as a sequence of closed form update operations, which yield a time complexity that is linear in the number of particles and the template size. We evaluate the performance of LRST by applying it to a set of challenging video sequences and comparing it to 6 popular tracking methods. Our experiments show that by representing particles jointly, LRST not only outperforms the state-of-the-art in tracking accuracy but also significantly improves the time complexity of methods that use a similar sparse linear representation model for particles [1]. © 2012 Springer-Verlag.

Raising Environmental Awareness through Applied Biochemistry Laboratory Experiments

Science.gov (United States)

Salman Ashraf, S.

2013-01-01

Our environment is under constant pressure and threat from various sources of pollution. Science students, in particular chemistry students, must not only be made aware of these issues, but also be taught that chemistry (and science) can provide solutions to such real-life issues. To this end, a newly developed biochemistry laboratory experiment…

Robust optimisation of forest transportation networks: a case study ...

African Journals Online (AJOL)

Forest transportation costs are the major cost component for many forest product supply chains. In order to minimise these costs, many organisations have turned ... The simulation results are then evaluated for robustness by means of seven robustness performance measures. For our case study, the results show that (1) the ...

The place of environmental education and awareness in biodiversity ...

African Journals Online (AJOL)

This paper examines the place of environmental education and awareness in biodiversity conservation in Nigeria. Depletion of biodiversity in Nigeria is a major environmental problem and a serious threat to livelihood and the quality of life. It is very important that future development programmes aggressively develop ...

Robust subspace estimation using low-rank optimization theory and applications

CERN Document Server

Oreifej, Omar

2014-01-01

Various fundamental applications in computer vision and machine learning require finding the basis of a certain subspace. Examples of such applications include face detection, motion estimation, and activity recognition. An increasing interest has been recently placed on this area as a result of significant advances in the mathematics of matrix rank optimization. Interestingly, robust subspace estimation can be posed as a low-rank optimization problem, which can be solved efficiently using techniques such as the method of Augmented Lagrange Multiplier. In this book,?the authors?discuss fundame

Probabilistic Robustness Analysis of Timber Structures—Results from EU COST Action E55:WG3

DEFF Research Database (Denmark)

Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

2011-01-01

The present paper outlines results from Working Group 3 (WG3) in the EU COST Action E55—‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental exposure...... scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

Adaptation of irrigation networks to climate change: Linking robust design and stakeholder contribution

Energy Technology Data Exchange (ETDEWEB)

Granados, A.; Martín-Carrasco, F.J.; García de Jalón, S.; Iglesias, A.

2015-07-01

Agriculture is a particularly sensitive sector to the potential impacts of climate change. Thus, irrigation infrastructure is required to be robust to cope with these potential threats. The objective of this research is designing more robust irrigation networks, considering cost and stakeholder contribution. To that end, the investigation was addressed in three phases: a sensitivity analysis to understand the effectiveness of the distinct variables, a cost-effectiveness analysis assessing their efficiency, and a global study of the most efficient variables to provide an insight into their function. The sensitivity analysis indicates that the networks oversized by means of the coefficient of utilisation or the factor of safety, behave better than those oversized via the continuous specific discharge; moreover, the degree of freedom has been shown ineffective. The cost-effectiveness analysis shows that the coefficient of utilisation and the factor of safety are the most efficient variables, as they introduced safety margin oversizing fewer network elements and to a lesser extent than the continuous specific discharge. It also shows that stakeholder contribution, conveyed as a reduction of the degree of freedom, plays an important role in the network’s adaptive capacity to change. The global study of these variables reveals the subtlety of the coefficient of utilisation, which is the variable that better reproduces the farmer behaviour during demand increase scenarios. In conclusion, the results identify the coefficient of utilisation as the variable which provides the safest margins and reveal the importance of stakeholder contribution in absorb the demand increase in a better manner. (Author)

Adaptation of irrigation networks to climate change: Linking robust design and stakeholder contribution

Directory of Open Access Journals (Sweden)

Alfredo Granados

2015-12-01

Full Text Available Agriculture is a particularly sensitive sector to the potential impacts of climate change. Thus, irrigation infrastructure is required to be robust to cope with these potential threats. The objective of this research is designing more robust irrigation networks, considering cost and stakeholder contribution. To that end, the investigation was addressed in three phases: a sensitivity analysis to understand the effectiveness of the distinct variables, a cost-effectiveness analysis assessing their efficiency, and a global study of the most efficient variables to provide an insight into their function. The sensitivity analysis indicates that the networks oversized by means of the coefficient of utilisation or the factor of safety, behave better than those oversized via the continuous specific discharge; moreover, the degree of freedom has been shown ineffective. The cost-effectiveness analysis shows that the coefficient of utilisation and the factor of safety are the most efficient variables, as they introduced safety margin oversizing fewer network elements and to a lesser extent than the continuous specific discharge. It also shows that stakeholder contribution, conveyed as a reduction of the degree of freedom, plays an important role in the network’s adaptive capacity to change. The global study of these variables reveals the subtlety of the coefficient of utilisation, which is the variable that better reproduces the farmer behaviour during demand increase scenarios. In conclusion, the results identify the coefficient of utilisation as the variable which provides the safest margins and reveal the importance of stakeholder contribution in absorb the demand increase in a better manner.

The Link between Preschoolers' Phonological Awareness and Mothers' Book-Reading and Reminiscing Practices in Low-Income Families

Science.gov (United States)

Leyva, Diana; Sparks, Alison; Reese, Elaine

2012-01-01

The relation between preschoolers' phonological awareness and the frequency and quality of parents' book-reading and reminiscing practices were examined in 54 low-income and ethnically diverse families. Children's phonological awareness was assessed at the beginning and end of preschool. Mothers reported the frequency with which they read books…

Cyberbiosecurity: From Naive Trust to Risk Awareness.

Science.gov (United States)

Peccoud, Jean; Gallegos, Jenna E; Murch, Randall; Buchholz, Wallace G; Raman, Sanjay

2018-01-01

The cyber-physical nature of biotechnology raises unprecedented security concerns. Computers can be compromised by encoding malware in DNA sequences, and biological threats can be synthesized using publicly available data. Trust within the biotechnology community creates vulnerabilities at the interface between cyberspace and biology. Awareness is a prerequisite to managing these risks. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Low-Cost Data Acquisition System for Automobile Dynamics Applications.

Science.gov (United States)

González, Alejandro; Olazagoitia, José Luis; Vinolas, Jordi

2018-01-27

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in <80 Hz data acquisition in vehicle dynamics, using low-cost accelerometers. In addition to this, a comparative study is carried out of professional vibration acquisition technologies and low-cost systems, obtaining optimum results for low- and medium-frequency operations with an error of 2.19% on road tests. It is therefore concluded that these technologies are applicable to the automobile industry, thereby allowing the project costs to be reduced and thus facilitating access to this kind of research that requires limited resources.

Robustness of structures

DEFF Research Database (Denmark)

Vrouwenvelder, T.; Sørensen, John Dalsgaard

2009-01-01

After the collapse of the World Trade Centre towers in 2001 and a number of collapses of structural systems in the beginning of the century, robustness of structural systems has gained renewed interest. Despite many significant theoretical, methodical and technological advances, structural...... of robustness for structural design such requirements are not substantiated in more detail, nor have the engineering profession been able to agree on an interpretation of robustness which facilitates for its uantification. A European COST action TU 601 on ‘Robustness of structures' has started in 2007...... by a group of members of the CSS. This paper describes the ongoing work in this action, with emphasis on the development of a theoretical and risk based quantification and optimization procedure on the one side and a practical pre-normative guideline on the other....

Diabetes Awareness of Low-Income Middle School Students Participating in the Help a Friend, Help Yourself Youth Diabetes Awareness Education Program

Science.gov (United States)

Wroten, Kathryn; Reames, Elizabeth S.; Tuuri, Georgianna

2012-01-01

The study reported here investigated the effectiveness of the LSU AgCenter Help a Friend, Help Yourself youth diabetes education curriculum to increase knowledge and awareness of diabetes and its symptoms in low-income middle school students participating in the Boys and Girls Club after-school program. The curriculum includes four lessons with…

Morphological awareness intervention with kindergartners and first and second grade students from low SES homes: a small efficacy study.

Science.gov (United States)

Apel, Kenn; Diehm, Emily

2014-01-01

We investigated the efficacy of a morphological awareness intervention on the morphological awareness and reading skills of students from low-socioeconomic-status homes; we also examined whether the intervention was similarly effective for intervention students who differed in their initial morphological awareness abilities. The 8-week intervention was designed to increase awareness of affixes and the relations between base words and their inflected and derived forms for kindergarteners (n = 27) and first- (n = 22) and second-grade (n = 26) students. Students randomly assigned to the small group intervention were provided instruction four times a week, 25 min a day, whereas students assigned to the control group received "business as usual." Kindergarten and first- and second-grade students receiving the intervention showed statistically significant gains in morphological awareness with large effect sizes on most measures. Students in all three grades who received the intervention demonstrated nonsignificant gains in literacy abilities with null to small effect sizes. Further, students with low morphological awareness abilities at the onset of the study demonstrated similar gains from the intervention as their peers with typical morphological awareness abilities. Our results suggest that explicit morphological awareness instruction may produce gains of practical importance to young elementary students at risk for future literacy difficulties.

How to Mobilize your Library at Low Cost

Directory of Open Access Journals (Sweden)

Marta Abarca Villoldo

2012-09-01

Full Text Available The W3C defines the mobile web as a web in which users are able to access information from any location, regardless of the type of device used. In recent years, Internet access from mobile devices has grown considerably. This is due to many factors such as technological improvements of these devices, faster data transmission and lower connection costs. This new context has led to the creation of various mobile web tools which offer a variety of features, such as adaptability of web websites, use of QR codes (Quick Response, geolocation tools, augmented reality and RFID technology just to name a few. Technological advances give rise to new challenges. We should face this situation not as a threat or added workload, but as an opportunity to adapt the library to the new demands or needs of our users. This means that some of the services currently offered by the library will have to evolve, for example, with the creation of a mobile website or a mOPAC (mobile OPAC. New services could be offered, such as QR codes embedded in the catalog with bibliographical information, virtual reference through the mobile or geolocation of libraries. This paper will first provide some basic and introductory information on the mobile web. It will then go on to describe some tools used in this area. In some cases, different options will be shown taking into account factors such as cost, for example. The aim here will be provide an overview that will allow a given library to select the best tool according to their functions and their budgets. Finally, a list of library applications will be given, as well as their associated implementation processes in the Universitat Politècnica de València (UPV library. The ultimate goal of this paper is to encourage the creation and adaptation of services offered in libraries, placing special emphasis on the idea that a variety of services can be offered with just basic computer skills and a small staff, since in many cases these

Cost-effectiveness of In-Home Cognitive Behavioral Therapy for low-income depressed mothers participating in early childhood prevention programs.

Science.gov (United States)

Ammerman, Robert T; Mallow, Peter J; Rizzo, John A; Putnam, Frank W; Van Ginkel, Judith B

2017-01-15

To determine the cost-effectiveness of In-Home Cognitive Behavioral Therapy (IH-CBT) for low-income mothers enrolled in a home visiting program. A cost-utility analysis was conducted using results from a clinical trial of IH-CBT and standard of care for depression derived from the literature. A probabilistic, patient-level Markov model was developed to determine Quality Adjusted Life Years (QALYs). Costs were determined using the Medical Expenditure Panel Survey. A three-year time horizon and payer perspective were used. Sensitivity analyses were employed to determine robustness of the model. IH-CBT was cost-effective relative to standard of care. IH-CBT was expected to be cost-effective at a three-year time horizon 99.5%, 99.7%, and 99.9% of the time for willingness-to-pay thresholds of US$25,000, US$50,000, and US$100,000, respectively. Patterns were upheld at one-year and five-year time horizons. Over the three-year time horizon, mothers receiving IH-CBT were expected to have 345.6 fewer days of depression relative to those receiving standard home visiting and treatment in the community. IH-CBT is a more cost-effective treatment for low-income, depressed mothers than current standards of practice. These findings add to the growing literature demonstrating the cost-effectiveness of CBT for depression, and expand it to cover new mothers. From a payer perspective, IH-CBT is a sound option for treatment of depressed, low-income mothers. Limitations include a restricted time horizon and estimating of standard of care costs. Copyright © 2016 Elsevier B.V. All rights reserved.

Cosmic bombardment V: Threat object-dispersing approaches to active planetary defense

Energy Technology Data Exchange (ETDEWEB)

Teller, E.; Wood, L. [Stanford Univ., CA (United States). Hoover Institution on War, Revolution and Peace]|[Lawrence Livermore National Lab., CA (United States); Ishikawa, M. [Stanford Univ., CA (United States). Dept. of Aeronautics and Astronautics]|[Lawrence Livermore National Lab., CA (United States); Hyde, R. [Lawrence Livermore National Lab., CA (United States)

1995-05-24

Earth-impacting comets and asteroids with diameters {approx}0.03 - 10 km pose the greatest threats to the terrestrial biosphere in terms of impact frequency-weighted impact consequences, and thus are of most concern to designers of active planetary defenses. Specific gravitational binding energies of such objects range from 10{sup -7} to 10{sup -2} J/gm, and are small compared with the specific energies of 1x10{sup 3} to 3x10{sup 3} J/gm required to vaporize objects of typical composition or the specific energies required to pulverize them, which are 10{sup -1} to 10 J/gm. All of these are small compared to the specific kinetic energy of these objects in the Earth- centered frame, which is 2x10{sup 5} to 2x10{sup 6} J/gm. The prospect naturally arises of negating all such threats by deflecting, pulverizing or vaporizing the objects. Pulverization-with-dispersal is an attractive option of reasonable defensive robustness. Examples of such equipments - which employ no explosives of any type - are given. Vaporization is the maximally robust defensive option, and may be invoked to negate threat objects not observed until little time is left until Earth-strike, and pulverization-with-dispersal has proven inadequate. Physically larger threats may be vaporized with nuclear explosives. No contemporary technical means of any kind appear capable of directly dispersing the -100 km diameter scale Charon- class cometary objects recently observed in the outer solar system, although such objects may be deflected to defensively useful extents. Means of implementing defenses of each of these types are proposed for specificity, and areas for optimization noted. Biospheric impacts of threat object debris are briefly considered, for bounding purposes. Experiments are suggested on cometary and asteroidal objects.

High-Efficient Low-Cost Photovoltaics Recent Developments

CERN Document Server

Petrova-Koch, Vesselinka; Goetzberger, Adolf

2009-01-01

A bird's-eye view of the development and problems of recent photovoltaic cells and systems and prospects for Si feedstock is presented. High-efficient low-cost PV modules, making use of novel efficient solar cells (based on c-Si or III-V materials), and low cost solar concentrators are in the focus of this book. Recent developments of organic photovoltaics, which is expected to overcome its difficulties and to enter the market soon, are also included.

Optical incremental rotary encoder in low-cost-design; Optischer inkrementaler Drehgeber in Low-Cost-Bauweise

Energy Technology Data Exchange (ETDEWEB)

Hopp, David; Pruss, Christof; Osten, Wolfgang [Stuttgart Univ. (Germany). Inst. fuer Technische Optik; Seybold, Jonathan; Mayer, Volker [Hans-Schickard-Gesellschaft, Stuttgart (DE). Inst. fuer Mikroaufbautechnik (IMAT); Kueck, Heinz [Hans-Schickard-Gesellschaft, Stuttgart (DE). Inst. fuer Mikroaufbautechnik (IMAT); Stuttgart Univ. (Germany). Inst. fuer Zeitmesstechnik, Fein- und Mikrotechnik

2010-07-01

We have developed a new concept for low-cost optical encoders to come up to meet the increasing demand for inexpensive rotary sensors. The principal idea is to use a micro patterned plastic disc with metal coating, as it is used for Compact Discs or DVDs. Such encoder discs can be manufactured by an efficient injection compression moulding process. With this well established technique it is possible to achieve highly precise micro patterns while running a cost effective process for high volume production. (orig.)

Supply Chain Risk Management: An Introduction to the Credible Threat

Science.gov (United States)

2016-08-01

van.poindexter@dau.mil. Figure 3. Trusted Suppliers Source: “ Managing Information Communications Technology Global Supply Chain Risk Awareness...Defense AT&L: July-August 2016 18 Supply Chain Risk Management An Introduction to the Credible Threat Heath Ferry n Van Poindexter 19...cybersecurity breach. This article examines the elements of supply chain risk management , the national security risks associated with exploitation, and

Robust optical sensors for safety critical automotive applications

Science.gov (United States)

De Locht, Cliff; De Knibber, Sven; Maddalena, Sam

2008-02-01

Optical sensors for the automotive industry need to be robust, high performing and low cost. This paper focuses on the impact of automotive requirements on optical sensor design and packaging. Main strategies to lower optical sensor entry barriers in the automotive market include: Perform sensor calibration and tuning by the sensor manufacturer, sensor test modes on chip to guarantee functional integrity at operation, and package technology is key. As a conclusion, optical sensor applications are growing in automotive. Optical sensor robustness matured to the level of safety critical applications like Electrical Power Assisted Steering (EPAS) and Drive-by-Wire by optical linear arrays based systems and Automated Cruise Control (ACC), Lane Change Assist and Driver Classification/Smart Airbag Deployment by camera imagers based systems.

Development of low-cost digital subtraction angiography system

International Nuclear Information System (INIS)

Ando, Yutaka; Kobayashi, Takeshi; Imai, Yutaka; Yagishita, Akira; Kunieda, Etsuo.

1983-01-01

We developed a simple and low-cost DSA system. This system consists of a conventional fluoroscopic equipment for the GI tract and a mini-computer (GAMMA-11) which are connected each other with a video-disc recorder. The uniqueness of our system are 1. low-cost, 2. low-radiation dose, 3. off-line processing, 4. flexibility of software. The analysis of the time-density curve and image processing will bring us a more usefull information than DSA alone. (author)

Threat evaluation for impact assessment in situation analysis systems

Science.gov (United States)

Roy, Jean; Paradis, Stephane; Allouche, Mohamad

2002-07-01

Situation analysis is defined as a process, the examination of a situation, its elements, and their relations, to provide and maintain a product, i.e., a state of situation awareness, for the decision maker. Data fusion is a key enabler to meeting the demanding requirements of military situation analysis support systems. According to the data fusion model maintained by the Joint Directors of Laboratories' Data Fusion Group, impact assessment estimates the effects on situations of planned or estimated/predicted actions by the participants, including interactions between action plans of multiple players. In this framework, the appraisal of actual or potential threats is a necessary capability for impact assessment. This paper reviews and discusses in details the fundamental concepts of threat analysis. In particular, threat analysis generally attempts to compute some threat value, for the individual tracks, that estimates the degree of severity with which engagement events will potentially occur. Presenting relevant tracks to the decision maker in some threat list, sorted from the most threatening to the least, is clearly in-line with the cognitive demands associated with threat evaluation. A key parameter in many threat value evaluation techniques is the Closest Point of Approach (CPA). Along this line of thought, threatening tracks are often prioritized based upon which ones will reach their CPA first. Hence, the Time-to-CPA (TCPA), i.e., the time it will take for a track to reach its CPA, is also a key factor. Unfortunately, a typical assumption for the computation of the CPA/TCPA parameters is that the track velocity will remain constant. When a track is maneuvering, the CPA/TCPA values will change accordingly. These changes will in turn impact the threat value computations and, ultimately, the resulting threat list. This is clearly undesirable from a command decision-making perspective. In this regard, the paper briefly discusses threat value stabilization

Energy-aware virtual network embedding in flexi-grid networks.

Science.gov (United States)

Lin, Rongping; Luo, Shan; Wang, Haoran; Wang, Sheng

2017-11-27

Network virtualization technology has been proposed to allow multiple heterogeneous virtual networks (VNs) to coexist on a shared substrate network, which increases the utilization of the substrate network. Efficiently mapping VNs on the substrate network is a major challenge on account of the VN embedding (VNE) problem. Meanwhile, energy efficiency has been widely considered in the network design in terms of operation expenses and the ecological awareness. In this paper, we aim to solve the energy-aware VNE problem in flexi-grid optical networks. We provide an integer linear programming (ILP) formulation to minimize the electricity cost of each arriving VN request. We also propose a polynomial-time heuristic algorithm where virtual links are embedded sequentially to keep a reasonable acceptance ratio and maintain a low electricity cost. Numerical results show that the heuristic algorithm performs closely to the ILP for a small size network, and we also demonstrate its applicability to larger networks.

Nuclear power threats, public opposition and green electricity adoption: Effects of threat belief appraisal and fear arousal

International Nuclear Information System (INIS)

Hartmann, Patrick; Apaolaza, Vanessa; D'Souza, Clare; Echebarria, Carmen; Barrutia, Jose M.

2013-01-01

This study analyses the extent to which willingness to oppose nuclear power and intention to adopt green electricity are related to the cognitive and emotional appraisal of threats deriving from nuclear power. The analysis draws on a theoretical framework which introduces emotional fear arousal as a direct behavioural antecedent of coping behaviour into a model based on cognitive centred Protection Motivation Theory (PMT, Maddux and Rogers, 1983; Rogers, 1983) and the Extended Parallel Processing Model (EPPM, Witte, 1992, 1998). Hypothesized relations are tested in a nationally representative online study conducted in April and May 2012, one year after the Fukushima accident. Results support the hypothesized influences of perceived threat, fear arousal and perceived coping efficacy. Support for the proposed effects of fear control is rather limited. Findings contribute to extending previous knowledge on the role of cognitive and emotional appraisal processes induced by awareness of threats from nuclear power as behavioural antecedents of both opposing nuclear power and adopting green electricity. Findings of the study have implications for nuclear power policy and activism, as well as for institutional and commercial promoters of voluntary residential green electricity adoption. - Highlights: • Nationally representative online survey on nuclear power conducted in Spain in April and May 2012. • Opposition to nuclear power and green electricity adoption are related to threat beliefs. • Emotional fear arousal motivates nuclear opposition and green electricity uptake. • Significant behavioural effects of coping efficacy are confirmed. • Influences of fear control on behaviour intentions are rather weak

Establishing a Cost Basis for Converting the High Flux Isotope Reactor from High Enriched to Low Enriched Uranium Fuel

International Nuclear Information System (INIS)

Primm, Trent; Guida, Tracey

2010-01-01

Under the auspices of the Global Threat Reduction Initiative Reduced Enrichment for Research and Test Reactors Program, the National Nuclear Security Administration/Department of Energy (NNSA/DOE) has, as a goal, to convert research reactors worldwide from weapons grade to non-weapons grade uranium. The High Flux Isotope Reactor (HFIR) at Oak Ridge National Lab (ORNL) is one of the candidates for conversion of fuel from high enriched uranium (HEU) to low enriched uranium (LEU). A well documented business model, including tasks, costs, and schedules was developed to plan the conversion of HFIR. Using Microsoft Project, a detailed outline of the conversion program was established and consists of LEU fuel design activities, a fresh fuel shipping cask, improvements to the HFIR reactor building, and spent fuel operations. Current-value costs total $76 million dollars, include over 100 subtasks, and will take over 10 years to complete. The model and schedule follows the path of the fuel from receipt from fuel fabricator to delivery to spent fuel storage and illustrates the duration, start, and completion dates of each subtask to be completed. Assumptions that form the basis of the cost estimate have significant impact on cost and schedule.

Context aware adaptive security service model

Science.gov (United States)

Tunia, Marcin A.

2015-09-01

Present systems and devices are usually protected against different threats concerning digital data processing. The protection mechanisms consume resources, which are either highly limited or intensively utilized by many entities. The optimization of these resources usage is advantageous. The resources that are saved performing optimization may be utilized by other mechanisms or may be sufficient for longer time. It is usually assumed that protection has to provide specific quality and attack resistance. By interpreting context situation of business services - users and services themselves, it is possible to adapt security services parameters to countermeasure threats associated with current situation. This approach leads to optimization of used resources and maintains sufficient security level. This paper presents architecture of adaptive security service, which is context-aware and exploits quality of context data issue.

Stereotype Threat Effects on African American Children in an Urban Elementary School

Science.gov (United States)

Wasserberg, Martin J.

2014-01-01

This study investigated whether a diagnostic testing condition leads to stereotype threat effects for African American children (n = 198) at an urban elementary school. Results indicated that presenting a reading test as diagnostic of abilities hindered the performance of African American children aware of racial stereotypes but not of those…

Organizing for low cost space operations - Status and plans

Science.gov (United States)

Lee, C.

1976-01-01

Design features of the Space Transportation System (vehicle reuse, low cost expendable components, simple payload interfaces, standard support systems) must be matched by economical operational methods to achieve low operating and payload costs. Users will be responsible for their own payloads and will be charged according to the services they require. Efficient use of manpower, simple documentation, simplified test, checkout, and flight planning are firm goals, together with flexibility for quick response to varying user needs. Status of the Shuttle hardware, plans for establishing low cost procedures, and the policy for user charges are discussed.

COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

Science.gov (United States)

Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

2015-10-01

The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

Self-Esteem and threats to self: implications for self-construals and interpersonal perceptions.

Science.gov (United States)

Vohs, K D; Heatherton, T F

2001-12-01

In 4 studies, the authors examined interpersonal perceptions as a function of self-construals and ego threats for those with high and low self-esteem. Previous research (T. F. Heatherton & K. D. Vohs, 2000a) found that after threat, high self-esteem people were rated as less likable by an unacquainted dyad partner, whereas low self-esteem people were rated as more likable. Study I showed that after threat, high self-esteem people seek competency feedback, whereas low self-esteem people seek interpersonal feedback. Study 2 showed that high self-esteem people become more independent after threat, whereas low self-esteem people become more interdependent. Study 3 linked differences in independence versus interdependence to interpersonal evaluations. Study 4 found that differences in independent and interdependent self-construals statistically accounted for differences in likability and personality perceptions of high and low self-esteem people after threat. Thus, the combination of threat and self-esteem alters people's focus on different self-aspects, which consequently leads to different interpersonal appraisals.

Low-cost, low-weight CNG cylinder development. Final report

Energy Technology Data Exchange (ETDEWEB)

Richards, Mark E.; Melford, K.; Wong, J.; Gambone, L.

1999-09-01

This program was established to develop and commercialize new high-strength steel-lined, composite hoop-wrapped compressed natural gas (CNG) cylinders for vehicular applications. As much as 70% of the cost of natural gas vehicles can be related to on-board natural gas storage costs. The cost and weight targets for this program represent significant savings in each characteristic when compared to comparable containers available at the initiation of the program. The program objectives were to optimize specific weight and cost goals, yielding CNG cylinders with dimensions that should, allowing for minor modifications, satisfy several vehicle market segments. The optimization process encompassed material, design, and process improvement. In optimizing the CNG cylinder design, due consideration was given to safety aspects relative to national, international, and vehicle manufacturer cylinder standards and requirements. The report details the design and development effort, encompassing plant modifications, material selection, design issues, tooling development, prototype development, and prototype testing. Extenuating circumstances prevented the immediate commercialization of the cylinder designs, though significant progress was made towards improving the cost and performance of CNG cylinders. A new low-cost fiber was successfully employed while the weight target was met and the cost target was missed by less than seven percent.

Comparative costs and cost-effectiveness of behavioural interventions as part of HIV prevention strategies.

Science.gov (United States)

Hsu, Justine; Zinsou, Cyprien; Parkhurst, Justin; N'Dour, Marguerite; Foyet, Léger; Mueller, Dirk H

2013-01-01

Behavioural interventions have been widely integrated in HIV/AIDS social marketing prevention strategies and are considered valuable in settings with high levels of risk behaviours and low levels of HIV/AIDS awareness. Despite their widespread application, there is a lack of economic evaluations comparing different behaviour change communication methods. This paper analyses the costs to increase awareness and the cost-effectiveness to influence behaviour change for five interventions in Benin. Cost and cost-effectiveness analyses used economic costs and primary effectiveness data drawn from surveys. Costs were collected for provider inputs required to implement the interventions in 2009 and analysed by 'person reached'. Cost-effectiveness was analysed by 'person reporting systematic condom use'. Sensitivity analyses were performed on all uncertain variables and major assumptions. Cost-per-person reached varies by method, with public outreach events the least costly (US$2.29) and billboards the most costly (US$25.07). Influence on reported behaviour was limited: only three of the five interventions were found to have a significant statistical correlation with reported condom use (i.e. magazines, radio broadcasts, public outreach events). Cost-effectiveness ratios per person reporting systematic condom use resulted in the following ranking: magazines, radio and public outreach events. Sensitivity analyses indicate rankings are insensitive to variation of key parameters although ratios must be interpreted with caution. This analysis suggests that while individual interventions are an attractive use of resources to raise awareness, this may not translate into a cost-effective impact on behaviour change. The study found that the extensive reach of public outreach events did not seem to influence behaviour change as cost-effectively when compared with magazines or radio broadcasts. Behavioural interventions are context-specific and their effectiveness influenced by a

Low-cost uncooled VOx infrared camera development

Science.gov (United States)

Li, Chuan; Han, C. J.; Skidmore, George D.; Cook, Grady; Kubala, Kenny; Bates, Robert; Temple, Dorota; Lannon, John; Hilton, Allan; Glukh, Konstantin; Hardy, Busbee

2013-06-01

The DRS Tamarisk® 320 camera, introduced in 2011, is a low cost commercial camera based on the 17 µm pixel pitch 320×240 VOx microbolometer technology. A higher resolution 17 µm pixel pitch 640×480 Tamarisk®640 has also been developed and is now in production serving the commercial markets. Recently, under the DARPA sponsored Low Cost Thermal Imager-Manufacturing (LCTI-M) program and internal project, DRS is leading a team of industrial experts from FiveFocal, RTI International and MEMSCAP to develop a small form factor uncooled infrared camera for the military and commercial markets. The objective of the DARPA LCTI-M program is to develop a low SWaP camera (costs less than US $500 based on a 10,000 units per month production rate. To meet this challenge, DRS is developing several innovative technologies including a small pixel pitch 640×512 VOx uncooled detector, an advanced digital ROIC and low power miniature camera electronics. In addition, DRS and its partners are developing innovative manufacturing processes to reduce production cycle time and costs including wafer scale optic and vacuum packaging manufacturing and a 3-dimensional integrated camera assembly. This paper provides an overview of the DRS Tamarisk® project and LCTI-M related uncooled technology development activities. Highlights of recent progress and challenges will also be discussed. It should be noted that BAE Systems and Raytheon Vision Systems are also participants of the DARPA LCTI-M program.

Environmental Awareness and The Role of Public Accounting Professional Bodies in Indonesia: A Brief Reflection

Directory of Open Access Journals (Sweden)

Ria Sandra Alimbudiono

2014-03-01

Full Text Available This study aims to give an insight about environmental awareness from public accountant and the role of Indonesian accounting professional bodies in ensuring professional sustainability. A naturalistic method was  applied to get deep understanding about the perspectives of the boards of professional bodies as a representation from the condition of public accountants in general. Data collection methods used in this study were interviews and focus group discussion. The findings highlight a variety of perspectives on knowledge of environment, interest in environmental accounting and moral responsibility on environmental damage. This variation shows different levels of awareness and it is mainly caused by the lack of law enforcement and no mandatory standards on environmental issues. This condition will threat legitimacy of accounting profession and finally, be able to endangered professional accounting sustainability. Limitations are about the scope and sample,which provide insights of the boards of public accountant professional bodies on environmental accounting issues. Future studies should be done on other accounting fields such as environmental audit, environmental accounting and reporting and environmental costing.

Costing of a State-Wide Population Based Cancer Awareness and Early Detection Campaign in a 2.67 Million Population of Punjab State in Northern India.

Science.gov (United States)

Thakur, Js; Prinja, Shankar; Jeet, Gursimer; Bhatnagar, Nidhi

2016-01-01

Punjab state is particularly reporting a rising burden of cancer. A 'door to door cancer awareness and early detection campaign' was therefore launched in the Punjab covering about 2.67 million population, wherein after initial training accredited social health activists (ASHAs) and other health staff conducted a survey for early detection of cancer cases based on a twelve point clinical algorithm. To ascertain unit cost for undertaking a population-based cancer awareness and early detection campaign. Data were collected using bottom-up costing methods. Full economic costs of implementing the campaign from the health system perspective were calculated. Options to meet the likely demand for project activities were further evaluated to examine their worth from the point of view of long-term sustainability. The campaign covered 97% of the state population. A total of 24,659 cases were suspected to have cancer and were referred to health facilities. At the state level, incidence and prevalence of cancer were found to be 90 and 216 per 100,000, respectively. Full economic cost of implementing the campaign in pilot district was USD 117,524. However, the financial cost was approximately USD 6,301. Start-up phase of campaign was more resource intensive (63% of total) than the implementation phase. The economic cost per person contacted and suspected by clinical algorithm was found to be USD 0.20 and USD 40 respectively. Cost per confirmed case under the campaign was 7,043 USD. The campaign was able to screen a reasonably large population. High to high economic cost points towards the fact that the opportunity cost of campaign put a significant burden on health system and other programs. However, generating awareness and early detection strategy adopted in this campaign seems promising in light of fact that organized screening is not in place in India and in many developing countries.

Breaking Barriers to Low-Cost Modular Inverter Production & Use

Energy Technology Data Exchange (ETDEWEB)

Bogdan Borowy; Leo Casey; Jerry Foshage; Steve Nichols; Jim Perkinson

2005-05-31

The goal of this cost share contract is to advance key technologies to reduce size, weight and cost while enhancing performance and reliability of Modular Inverter Product for Distributed Energy Resources (DER). Efforts address technology development to meet technical needs of DER market protection, isolation, reliability, and quality. Program activities build on SatCon Technology Corporation inverter experience (e.g., AIPM, Starsine, PowerGate) for Photovoltaic, Fuel Cell, Energy Storage applications. Efforts focused four technical areas, Capacitors, Cooling, Voltage Sensing and Control of Parallel Inverters. Capacitor efforts developed a hybrid capacitor approach for conditioning SatCon's AIPM unit supply voltages by incorporating several types and sizes to store energy and filter at high, medium and low frequencies while minimizing parasitics (ESR and ESL). Cooling efforts converted the liquid cooled AIPM module to an air-cooled unit using augmented fin, impingement flow cooling. Voltage sensing efforts successfully modified the existing AIPM sensor board to allow several, application dependent configurations and enabling voltage sensor galvanic isolation. Parallel inverter control efforts realized a reliable technique to control individual inverters, connected in a parallel configuration, without a communication link. Individual inverter currents, AC and DC, were balanced in the paralleled modules by introducing a delay to the individual PWM gate pulses. The load current sharing is robust and independent of load types (i.e., linear and nonlinear, resistive and/or inductive). It is a simple yet powerful method for paralleling both individual devices dramatically improves reliability and fault tolerance of parallel inverter power systems. A patent application has been made based on this control technology.

A Vehicle Steering Recognition System Based on Low-Cost Smartphone Sensors

Directory of Open Access Journals (Sweden)

Xinhua Liu

2017-03-01

Full Text Available Recognizing how a vehicle is steered and then alerting drivers in real time is of utmost importance to the vehicle and driver’s safety, since fatal accidents are often caused by dangerous vehicle maneuvers, such as rapid turns, fast lane-changes, etc. Existing solutions using video or in-vehicle sensors have been employed to identify dangerous vehicle maneuvers, but these methods are subject to the effects of the environmental elements or the hardware is very costly. In the mobile computing era, smartphones have become key tools to develop innovative mobile context-aware systems. In this paper, we present a recognition system for dangerous vehicle steering based on the low-cost sensors found in a smartphone: i.e., the gyroscope and the accelerometer. To identify vehicle steering maneuvers, we focus on the vehicle’s angular velocity, which is characterized by gyroscope data from a smartphone mounted in the vehicle. Three steering maneuvers including turns, lane-changes and U-turns are defined, and a vehicle angular velocity matching algorithm based on Fast Dynamic Time Warping (FastDTW is adopted to recognize the vehicle steering. The results of extensive experiments show that the average accuracy rate of the presented recognition reaches 95%, which implies that the proposed smartphone-based method is suitable for recognizing dangerous vehicle steering maneuvers.

Perceived control qualifies the effects of threat on prejudice.

Science.gov (United States)

Greenaway, Katharine H; Louis, Winnifred R; Hornsey, Matthew J; Jones, Janelle M

2014-09-01

People sometimes show a tendency to lash out in a prejudiced manner when they feel threatened. This research shows that the relationship between threat and prejudice is moderated by people's levels of perceived control: Threat leads to prejudice only when people feel concurrently low in control. In two studies, terrorist threat was associated with heightened prejudice among people who were low in perceived control over the threat (Study 1; N = 87) or over their lives in general (Study 2; N = 2,394), but was not associated with prejudice among people who were high in perceived control. Study 3 (N = 139) replicated this finding experimentally in the context of the Global Financial Crisis. The research identifies control as an important ingredient in threatening contexts that, if bolstered, can reduce general tendencies to lash out under threat. © 2013 The British Psychological Society.

Costs of mixed low-level waste stabilization options

International Nuclear Information System (INIS)

Schwinkendorf, W.E.; Cooley, C.R.

1998-01-01

Selection of final waste forms to be used for disposal of DOE's mixed low-level waste (MLLW) depends on the waste form characteristics and total life cycle cost. In this paper the various cost factors associated with production and disposal of the final waste form are discussed and combined to develop life-cycle costs associated with several waste stabilization options. Cost factors used in this paper are based on a series of treatment system studies in which cost and mass balance analyses were performed for several mixed low-level waste treatment systems and various waste stabilization methods including vitrification, grout, phosphate bonded ceramic and polymer. Major cost elements include waste form production, final waste form volume, unit disposal cost, and system availability. Production of grout costs less than the production of a vitrified waste form if each treatment process has equal operating time (availability) each year; however, because of the lower volume of a high temperature slag, certification and handling costs and disposal costs of the final waste form are less. Both the total treatment cost and life cycle costs are higher for a system producing grout than for a system producing high temperature slag, assuming equal system availability. The treatment costs decrease with increasing availability regardless of the waste form produced. If the availability of a system producing grout is sufficiently greater than a system producing slag, then the cost of treatment for the grout system will be less than the cost for the slag system, and the life cycle cost (including disposal) may be less depending on the unit disposal cost. Treatment and disposal costs will determine the return on investment in improved system availability

Efficacy of attention bias modification using threat and appetitive stimuli: a meta-analytic review.

Science.gov (United States)

Beard, Courtney; Sawyer, Alice T; Hofmann, Stefan G

2012-12-01

Attention bias modification (ABM) protocols aim to modify attentional biases underlying many forms of pathology. Our objective was to conduct an effect size analysis of ABM across a wide range of samples and psychological problems. We conducted a literature search using PubMed, PsycInfo, and author searches to identify randomized studies that examined the effects of ABM on attention and subjective experiences. We identified 37 studies (41 experiments) totaling 2,135 participants who were randomized to training toward neutral, positive, threat, or appetitive stimuli or to a control condition. The effect size estimate for changes in attentional bias was large for the neutral versus threat comparisons (g=1.06), neutral versus appetitive (g=1.41), and neutral versus control comparisons (g=0.80), and small for positive versus control (g=0.24). The effects of ABM on attention bias were moderated by stimulus type (words vs. pictures) and sample characteristics (healthy vs. high symptomatology). Effect sizes of ABM on subjective experiences ranged from 0.03 to 0.60 for postchallenge outcomes, -0.31 to 0.51 for posttreatment, and were moderated by number of training sessions, stimulus type, and stimulus orientation (top/bottom vs. left/right). Fail-safe N calculations suggested that the effect size estimates were robust for the training effects on attentional biases, but not for the effect on subjective experiences. ABM studies using threat stimuli produced significant effects on attention bias across comparison conditions, whereas appetitive stimuli produced changes in attention only when comparing appetitive versus neutral conditions. ABM has a moderate and robust effect on attention bias when using threat stimuli. Further studies are needed to determine whether these effects are also robust when using appetitive stimuli and for affecting subjective experiences. Copyright © 2012. Published by Elsevier Ltd.

Robust and Low-Complexity Timing Synchronization Algorithm and its Architecture for ADSRC Applications

Directory of Open Access Journals (Sweden)

KIM, J.

2009-10-01

Full Text Available 5.9 GHz advanced dedicated short range communications (ADSRC is a short-to-medium range communication standard that supports both public safety and private operations in roadside-to-vehicle and vehicle-to-vehicle communication environments. The core technology of physical layer in ADSRC is orthogonal frequency division multiplexing (OFDM, which is sensitive to timing synchronization error. In this paper, a robust and low-complexity timing synchronization algorithm suitable for ADSRC system and its efficient hardware architecture are proposed. The implementation of the proposed architecture is performed with Xilinx Vertex-II XC2V1000 Field Programmable Gate Array (FPGA. The proposed algorithm is based on cross-correlation technique, which is employed to detect the starting point of short training symbol and the guard interval of the long training symbol. Synchronization error rate (SER evaluation results and post-layout simulation results show that the proposed algorithm is efficient in high-mobility environments. The post-layout results of implementation demonstrate the robustness and low-complexity of the proposed architecture.

Understanding Employee Awareness of Health Care Quality Information: How Can Employers Benefit?

Science.gov (United States)

Abraham, Jean; Feldman, Roger; Carlin, Caroline

2004-01-01

Objective To analyze the factors associated with employee awareness of employer-disseminated quality information on providers. Data Sources Primary data were collected in 2002 on a stratified, random sample of 1,365 employees in 16 firms that are members of the Buyers Health Care Action Group (BHCAG) located in the Minneapolis–St. Paul region. An employer survey was also conducted to assess how employers communicated the quality information to employees. Study Design In 2001, BHCAG sponsored two programs for reporting provider quality. We specify employee awareness of the quality information to depend on factors that influence the benefits and costs of search. Factors influencing the benefits include age, sex, provider satisfaction, health status, job tenure, and Twin Cities tenure. Factors influencing search costs include employee income, education, and employer communication strategies. We estimate the model using bivariate probit analysis. Data Collection Employee data were collected by phone survey. Principal Findings Overall, the level of quality information awareness is low. However, employer communication strategies such as distributing booklets to all employees or making them available on request have a large effect on the probability of quality information awareness. Employee education and utilization of providers' services are also positively related to awareness. Conclusions This study is one of the first to investigate employee awareness of provider quality information. Given the direct implications for medical outcomes, one might anticipate higher rates of awareness regarding provider quality, relative to plan quality. However, we do not find empirical evidence to support this assertion. PMID:15533188

Emotionality and self-regulation, threat appraisal, and coping in children of divorce.

Science.gov (United States)

Lengua, L J; Sandler, I N; West, S G; Wolchik, S A; Curran, P J

1999-01-01

A model of the effects of children's temperament (negative and positive emotionality, impulsivity and attention focusing) on post-divorce threat appraisals, coping (active and avoidant), and psychological symptoms (depression and conduct problems) was investigated. The study utilized a sample of 223 mothers and children (ages 9 to 12 years) who had experienced divorce within the last two years. Evidence was found of direct effects of child-report negative emotionality on children's threat perceptions and of child-report positive emotionality and impulsivity on children's coping. Indirect effects of negative emotionality on active and avoidant coping through threat appraisal were found. Direct effects of the temperament variables on symptoms were also found. Cross group analyses indicated that the models were robust to age differences, but gender differences were found in the relation between negative emotionality and depression. The results of this study indicate that temperament and threat appraisals are important predictors of children's post-divorce symptoms, and that temperament is a predictor of children's appraisal and coping process.

Generalized internal model robust control for active front steering intervention

Science.gov (United States)

Wu, Jian; Zhao, Youqun; Ji, Xuewu; Liu, Yahui; Zhang, Lipeng

2015-03-01

Because of the tire nonlinearity and vehicle's parameters' uncertainties, robust control methods based on the worst cases, such as H ∞, µ synthesis, have been widely used in active front steering control, however, in order to guarantee the stability of active front steering system (AFS) controller, the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control. In this paper, a generalized internal model robust control (GIMC) that can overcome the contradiction between performance and stability is used in the AFS control. In GIMC, the Youla parameterization is used in an improved way. And GIMC controller includes two sections: a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters' uncertainties and some external disturbances. Simulations of double lane change (DLC) maneuver and that of braking on split- µ road are conducted to compare the performance and stability of the GIMC control, the nominal performance PID controller and the H ∞ controller. Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle's parameters variations, H ∞ controller is conservative so that the performance is a little low, and only the GIMC controller overcomes the contradiction between performance and robustness, which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller. Therefore, the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system, that is, can solve the instability of PID or LQP control methods and the low performance of the standard H ∞ controller.

Attachment anxiety and reactions to relationship threat: the benefits and costs of inducing guilt in romantic partners.

Science.gov (United States)

Overall, Nickola C; Girme, Yuthika U; Lemay, Edward P; Hammond, Matthew D

2014-02-01

The current research tested whether individuals high in attachment anxiety react to relationship threats in ways that can help them feel secure and satisfied in their relationship. Individuals higher in attachment anxiety experienced greater hurt feelings on days they faced partner criticism or conflict (Study 1) and during observed conflict discussions (Study 2). These pronounced hurt feelings triggered exaggerated expressions of hurt to induce guilt in the partner. Partners perceived the hurt feelings of more anxious individuals to be more intense than low anxious individuals' hurt and, in turn, experienced greater levels of guilt (Study 1). More anxious individuals were also rated by objective coders as exhibiting more guilt-induction strategies during conflict, which led to increases in partner guilt (Study 2). Moreover, partner guilt helped anxious individuals maintain more positive relationship evaluations. Although greater partner guilt had detrimental effects for individuals low in anxiety, more anxious individuals experienced more stable perceptions of their partner's commitment and more positive relationship evaluations when their partner felt more guilt. Unfortunately, these benefits were accompanied by significant declines in the partner's relationship satisfaction. These results illustrate that anxious reactions to threat are not uniformly destructive; instead, the reassuring emotions their reactions induce in relationship partners help anxious individuals feel satisfied and secure in their partner's commitment. PsycINFO Database Record (c) 2014 APA, all rights reserved

Robust and Energy-Efficient Ultra-Low-Voltage Circuit Design under Timing Constraints in 65/45 nm CMOS

Directory of Open Access Journals (Sweden)

David Bol

2011-01-01

Full Text Available Ultra-low-voltage operation improves energy efficiency of logic circuits by a factor of 10×, at the expense of speed, which is acceptable for applications with low-to-medium performance requirements such as RFID, biomedical devices and wireless sensors. However, in 65/45 nm CMOS, variability and short-channel effects significantly harm robustness and timing closure of ultra-low-voltage circuits by reducing noise margins and jeopardizing gate delays. The consequent guardband on the supply voltage to meet a reasonable manufacturing yield potentially ruins energy efficiency. Moreover, high leakage currents in these technologies degrade energy efficiency in case of long stand-by periods. In this paper, we review recently published techniques to design robust and energy-efficient ultra-low-voltage circuits in 65/45 nm CMOS under relaxed yet strict timing constraints.

Forecasting Lightning Threat Using WRF Proxy Fields

Science.gov (United States)

McCaul, E. W., Jr.

2010-01-01

Objectives: Given that high-resolution WRF forecasts can capture the character of convective outbreaks, we seek to: 1. Create WRF forecasts of LTG threat (1-24 h), based on 2 proxy fields from explicitly simulated convection: - graupel flux near -15 C (captures LTG time variability) - vertically integrated ice (captures LTG threat area). 2. Calibrate each threat to yield accurate quantitative peak flash rate densities. 3. Also evaluate threats for areal coverage, time variability. 4. Blend threats to optimize results. 5. Examine sensitivity to model mesh, microphysics. Methods: 1. Use high-resolution 2-km WRF simulations to prognose convection for a diverse series of selected case studies. 2. Evaluate graupel fluxes; vertically integrated ice (VII). 3. Calibrate WRF LTG proxies using peak total LTG flash rate densities from NALMA; relationships look linear, with regression line passing through origin. 4. Truncate low threat values to make threat areal coverage match NALMA flash extent density obs. 5. Blend proxies to achieve optimal performance 6. Study CAPS 4-km ensembles to evaluate sensitivities.

Building brand awareness for products with low purchase frequency

OpenAIRE

Bøe, Kenneth; Bjørnstad, Tord Røise

2014-01-01

The importance of marketing and information flow is growing every year, and in increasingly competitive markets, it is more important than ever for brands to be present in the customers mind in the purchase decision. Therefore, to build and maintain brand awareness is important as this is the first step in creating brand equity. Most studies have focused on building brand awareness for products with high purchase frequency. In this thesis, it is identified drivers of brand awareness for pr...

A framework for cost-aware process management: cost reporting and cost prediction

NARCIS (Netherlands)

Wynn, M.T.; Low, W.Z.; Hofstede, ter A.H.M.; Nauta, W.E.

2014-01-01

Organisations are constantly seeking efficiency gains for their business processes in terms of time and cost. Management accounting enables detailed cost reporting of business operations for decision making purposes, although significant effort is required to gather accurate operational data.

Robust H∞ output-feedback control for path following of autonomous ground vehicles

Science.gov (United States)

Hu, Chuan; Jing, Hui; Wang, Rongrong; Yan, Fengjun; Chadli, Mohammed

2016-03-01

This paper presents a robust H∞ output-feedback control strategy for the path following of autonomous ground vehicles (AGVs). Considering the vehicle lateral velocity is usually hard to measure with low cost sensor, a robust H∞ static output-feedback controller based on the mixed genetic algorithms (GA)/linear matrix inequality (LMI) approach is proposed to realize the path following without the information of the lateral velocity. The proposed controller is robust to the parametric uncertainties and external disturbances, with the parameters including the tire cornering stiffness, vehicle longitudinal velocity, yaw rate and road curvature. Simulation results based on CarSim-Simulink joint platform using a high-fidelity and full-car model have verified the effectiveness of the proposed control approach.

Efficacy of Low-Cost PC-Based Aviation Training Devices

Directory of Open Access Journals (Sweden)

Savern l Reweti

2017-03-01

Full Text Available Aim/Purpose: The aim of this study was to explore whether a full cost flight training device (FTD was significantly better for simulator training than a low cost PC-Based Aviation Training Device (PCATD. Background: A quasi-transfer study was undertaken to ascertain whether a Civil Aviation Authority certified Flight Training Device (FTD was more effective at improving pilot proficiency in the performance of a standard VFR traffic pattern (Overhead Rejoin Procedure than a customised low cost PCATD. Methodology: In this quasi-transfer study, a high fidelity FTD rather than an aircraft was used to test both training and transfer tasks. Ninety-three pilots were recruited to participate in the study. Contribution: The use of PCATDs is now well established for pilot training, especially for Instrument Flight Rules (IFR skills training. However, little substantive research has been undertaken to examine their efficacy for VFR training. Findings: There was no evidence of a pre-test/post-test difference in VFR task perfor-mance between participants trained on the PCATD and the FTD, when post tested on the FTD. The use of both PCATD and FTD demonstrated signifi-cant improvements in VFR task performance compared to a control group that received no PCATD or FTD training. Recommendations for Practitioners\t: We discuss the possibility that low cost PCATDs may be a viable alternative for flight schools wishing to use a flight simulator but not able to afford a FTD. Recommendation for Researchers: We discuss the introduction of improved low cost technologies that allow PCATDs to be used more effectively for training in VFR procedures. The development and testing of new technologies requires more research. Impact on Society: Flight training schools operate in a difficult economic environment with continued increases in the cost of aircraft maintenance, compliance costs, and aviation fuel. The increased utilisation of low cost PCATD’s especially for VFR

A low cost maritime control aircraft-ship-weapons system. [antiship missile defense

Science.gov (United States)

Fluk, H.

1981-01-01

It is pointed out that the long-range antiship standoff missile is emerging as the foremost threat on the seas. Delivered by high speed bombers, surface ships, and submarines, a missile attack can be mounted against selected targets from any point on the compass. An investigation is conducted regarding the configuration of a system which could most efficiently identify and destroy standoff threats before they launch their weapons. It is found that by using ships for carrying and launching missiles, and employing aircraft with a powerful radar only for search and missile directing operations, aircraft cost and weight can be greatly reduced. The employment of V/STOL aircraft in preference to other types of aircraft makes it possible to use ships of smaller size for carrying the aircraft. However, in order to obtain an all-weather operational capability for the system, ships are selected which are still big enough to display the required stability in heavy seas.

Low-cost ARM Cortex-M0 Based TRNG for IoT Applications

Directory of Open Access Journals (Sweden)

Marek Laban

2018-03-01

Full Text Available The Internet of Things (IoT is one of perspective electronic sectors. In the near future a lot of common devices from a refrigerator to a door lock will be connected to the internet. Protection of the IoT devices should not be neglected. The device security is composed of many safety levels, where every countermeasure increases its robustness. The paper describes an implementation of a True Random Number Generator (TRNG used in many cryptographic algorithms and protocols. It is based on a modern low-cost and low-power STM32F050 ARM-M0 microcontroller, suitable especially for IoT applications. The main motivation for developing of such generator was its absence in lower members of microcontroller families. Integrated TRNG uses common features of the microcontroller, which may be portable across ARM-M0 architecture. A source of randomness is instability of internal RC oscillator, which is acquired using another faster clock and one timer. The paper follows a previous research, but using the modern microcontroller with proposed on-line embedded tests which are designed in order to be simple and effective.

Multi-level Correlates of Safer Conception Methods Awareness and Attitudes Among Ugandan HIV Clients with Fertility Intentions

OpenAIRE

Wagner, Glenn J.; Woldetsadik, Mahlet A.; Beyeza-Kashesya, Jolly; Goggin, Kathy; Mindry, Deborah; Finocchario-Kessler, Sarah; Khanakwa, Sarah; Wanyenze, Rhoda K.

2016-01-01

Many people living with HIV desire childbearing, but low cost safer conception methods (SCM) such as timed unprotected intercourse (TUI) and manual self-insemination (MSI) are rarely used. We examined awareness and attitudes towards SCM, and the correlates of these constructs among 400 HIV clients with fertility intentions in Uganda. Measures included awareness, self-efficacy, and motivation regarding SCM, as well as demographics, health management, partner and provider characteristics. Just ...

Culturally-adapted and audio-technology assisted HIV/AIDS awareness and education program in rural Nigeria: a cohort study

Directory of Open Access Journals (Sweden)

Lennox Jeffrey L

2010-02-01

Full Text Available Abstract Background HIV-awareness programs tailored toward the needs of rural communities are needed. We sought to quantify change in HIV knowledge in three rural Nigerian villages following an integrated culturally adapted and technology assisted educational intervention. Methods A prospective 14-week cohort study was designed to compare short-term changes in HIV knowledge between seminar-based education program and a novel program, which capitalized on the rural culture of small-group oral learning and was delivered by portable digital-audio technology. Results Participants were mostly Moslem (99%, male (53.5%, with no formal education (55%. Baseline HIV knowledge was low ( Conclusions Baseline HIV-awareness was low. Culturally adapted, technology-assisted HIV education program is a feasible cost-effective method of raising HIV awareness among low-literacy rural communities.

Analyzing Cyber-Physical Threats on Robotic Platforms.

Science.gov (United States)

Ahmad Yousef, Khalil M; AlMajali, Anas; Ghalyon, Salah Abu; Dweik, Waleed; Mohd, Bassam J

2018-05-21

Robots are increasingly involved in our daily lives. Fundamental to robots are the communication link (or stream) and the applications that connect the robots to their clients or users. Such communication link and applications are usually supported through client/server network connection. This networking system is amenable of being attacked and vulnerable to the security threats. Ensuring security and privacy for robotic platforms is thus critical, as failures and attacks could have devastating consequences. In this paper, we examine several cyber-physical security threats that are unique to the robotic platforms; specifically the communication link and the applications. Threats target integrity, availability and confidential security requirements of the robotic platforms, which use MobileEyes/arnlServer client/server applications. A robot attack tool (RAT) was developed to perform specific security attacks. An impact-oriented approach was adopted to analyze the assessment results of the attacks. Tests and experiments of attacks were conducted in simulation environment and physically on the robot. The simulation environment was based on MobileSim; a software tool for simulating, debugging and experimenting on MobileRobots/ActivMedia platforms and their environments. The robot platform PeopleBot TM was used for physical experiments. The analysis and testing results show that certain attacks were successful at breaching the robot security. Integrity attacks modified commands and manipulated the robot behavior. Availability attacks were able to cause Denial-of-Service (DoS) and the robot was not responsive to MobileEyes commands. Integrity and availability attacks caused sensitive information on the robot to be hijacked. To mitigate security threats, we provide possible mitigation techniques and suggestions to raise awareness of threats on the robotic platforms, especially when the robots are involved in critical missions or applications.

Analyzing Cyber-Physical Threats on Robotic Platforms

Directory of Open Access Journals (Sweden)

Khalil M. Ahmad Yousef

2018-05-01

Full Text Available Robots are increasingly involved in our daily lives. Fundamental to robots are the communication link (or stream and the applications that connect the robots to their clients or users. Such communication link and applications are usually supported through client/server network connection. This networking system is amenable of being attacked and vulnerable to the security threats. Ensuring security and privacy for robotic platforms is thus critical, as failures and attacks could have devastating consequences. In this paper, we examine several cyber-physical security threats that are unique to the robotic platforms; specifically the communication link and the applications. Threats target integrity, availability and confidential security requirements of the robotic platforms, which use MobileEyes/arnlServer client/server applications. A robot attack tool (RAT was developed to perform specific security attacks. An impact-oriented approach was adopted to analyze the assessment results of the attacks. Tests and experiments of attacks were conducted in simulation environment and physically on the robot. The simulation environment was based on MobileSim; a software tool for simulating, debugging and experimenting on MobileRobots/ActivMedia platforms and their environments. The robot platform PeopleBotTM was used for physical experiments. The analysis and testing results show that certain attacks were successful at breaching the robot security. Integrity attacks modified commands and manipulated the robot behavior. Availability attacks were able to cause Denial-of-Service (DoS and the robot was not responsive to MobileEyes commands. Integrity and availability attacks caused sensitive information on the robot to be hijacked. To mitigate security threats, we provide possible mitigation techniques and suggestions to raise awareness of threats on the robotic platforms, especially when the robots are involved in critical missions or applications.

Buffers or Boosters? The Role of HRM Practices in Older Workers' Experience of Stereotype Threat.

Science.gov (United States)

Oliveira, Eduardo André da Silva; Cabral-Cardoso, Carlos José

2018-01-02

Building on the social identity approach and the HRM literature, this two-wave cross-sectional study examined the effects of negative age-based metastereotypes on the age-based stereotype threat experience of older workers and on organizational disidentification. The moderator role of HRM practices in the relationship between negative age-based metastereotypes and age-based stereotype threat was also investigated. Older workers survey results (n = 469) from 14 manufacturing companies indicated that negative age-based metastereotypes correlate positively with stereotype threat. Moderation results showed that age-awareness HRM practices (training for older workers) reinforced age-based stereotype threat, whereas general HRM practices (recognition and respect) impaired it. The article suggests that the combination of age-based metastereotypes with a stereotype threat framework contributes to further understand older workers' beliefs and attitudes. It also indicates that to be effective, HRM practices should emphasize positive social identities older workers share with their colleagues, rather than giving older workers special treatment that may, after all, reinforce stigmatization.

Multivariable robust control of an air-handling unit: A comparison between pole-placement and H∞ controllers

International Nuclear Information System (INIS)

Moradi, Hamed; Bakhtiari-Nejad, Firooz; Saffar-Avval, Majid

2012-01-01

Highlights: ► Robust control of a multivariable air-handling unit (AHU). ► Controllers designed based on pole-placement and μ-synthesis. ► Robust performance in the presence of model uncertainties. ► Achievement of various tracking objectives in temperature and relative humidity. ► Comfort conditions in buildings with low energy consumption and operation cost. - Abstract: Control of air-conditioner units is essential to achieve satisfactory comfort conditions in buildings while keeping low energy consumption and operation costs. In this paper, a nonlinear multiinput and multioutput model (MIMO) of an air-handling unit (AHU) is considered. After linearization of the state equations around the operating points, an observer and a regulator are designed for the estimation of state variables and disturbance rejection, respectively. A realistic uncertain model is considered which constitutes various uncertainties associated with complex nonlinear model of AHU. In the presence of model uncertainties, a H ∞ -robust controller is designed to guarantee robust performance of the air-handling unit. In addition, a simple controller based on pole-placement approach is developed. Indoor temperature and relative humidity are controlled via manipulation of valve positions of air and cold water flow rates. Achievement of tracking objectives is investigated through various desired commands of indoor temperature and relative humidity (including a sequence of steps and ramps-steps). According to results, the H ∞ -robust controller guarantees the robust performance of the AHU in tracking of desired set-paths (while using the simple pole-placement controller leads to high oscillatory behavior of the output variables and control efforts). Moreover, using H ∞ -robust controller results in less energy consumption in comparison with the pole-placement controller.

Low-cost, highly transparent flexible low-e coating film to enable electrochromic windows with increased energy savings

Energy Technology Data Exchange (ETDEWEB)

Berland, Brian [ITN Energy Systems, Inc., Littleton, CO (United States); Hollingsworth, Russell [ITN Energy Systems, Inc., Littleton, CO (United States)

2015-03-31

Five Quads of energy are lost through windows annually in the U.S. Low-e coatings are increasingly employed to reduce the wasted energy. Most commonly, the low-e coating is an oxide material applied directly to the glass at high temperature. With over 100,000,000 existing homes, a retrofit product is crucial to achieve widespread energy savings. Low-e films, i.e. coatings on polymeric substrates, are now also available to meet this need. However, the traditional oxide materials and process is incompatible with low temperature plastics. Alternate high performing low-e films typically incorporate materials that limit visible transmission to 35% or less. Further, the cost is high. The objective of this award was to develop a retrofit, integrated low-e/electrochromic window film to dramatically reduce energy lost through windows. While field testing of state-of-the-art electrochromic (EC) windows show the energy savings are maximized if a low-e coating is used in conjunction with the EC, available low-e films have a low visible transmission (~70% or less) that limits the achievable clear state and therefore, appearance and energy savings potential. Comprehensive energy savings models were completed at Lawrence Berkeley National Lab (LBNL). A parametric approach was used to project energy usage for windows with a large range of low-e properties across all U.S. climate zones, without limiting the study to materials that had already been produced commercially or made in a lab. The model enables projection of energy savings for low-e films as well as integrated low-e/EC products. This project developed a novel low-e film, optimized for compatibility with EC windows, using low temperature, high deposition rate processes for the growth of low-e coatings on plastic films by microwave plasma enhanced chemical vapor deposition. Silica films with good density and optical properties were demonstrated at deposition rates as high as 130Å/sec. A simple bi-layer low-e stack of

Self-reported interoceptive awareness in primary care patients with past or current low back pain

Directory of Open Access Journals (Sweden)

Mehling WE

2013-05-01

Full Text Available Wolf E Mehling,1,2 Jennifer Daubenmier,1,3 Cynthia J Price,5 Mike Acree,1 Elizabeth Bartmess,1 Anita L Stewart41Osher Center for Integrative Medicine, 2Department of Family and Community Medicine, 3Department of Medicine, 4School of Nursing, Institute for Health and Aging, University of California, San Francisco, CA, 5School of Nursing, Department of Biobehavioral Nursing and Health Systems, University of Washington, Seattle, WA, USABackground: Mind–body interactions play a major role in the prognosis of chronic pain, and mind–body therapies such as meditation, yoga, Tai Chi, and Feldenkrais presumably provide benefits for pain patients. The Multidimensional Assessment of Interoceptive Awareness (MAIA scales, designed to measure key aspects of mind–body interaction, were developed and validated with individuals practicing mind–body therapies, but have never been used in pain patients.Methods: We administered the MAIA to primary care patients with past or current low back pain and explored differences in the performance of the MAIA scales between this and the original validation sample. We compared scale means, exploratory item cluster and confirmatory factor analyses, scale–scale correlations, and internal-consistency reliability between the two samples and explored correlations with validity measures.Results: Responses were analyzed from 435 patients, of whom 40% reported current pain. Cross-sectional comparison between the two groups showed marked differences in eight aspects of interoceptive awareness. Factor and cluster analyses generally confirmed the conceptual model with its eight dimensions in a pain population. Correlations with validity measures were in the expected direction. Internal-consistency reliability was good for six of eight MAIA scales. We provided specific suggestions for their further development.Conclusion: Self-reported aspects of interoceptive awareness differ between primary care patients with past or current

A Low-Cost Data Acquisition System for Automobile Dynamics Applications

Science.gov (United States)

González, Alejandro; Vinolas, Jordi

2018-01-01

This project addresses the need for the implementation of low-cost acquisition technology in the field of vehicle engineering: the design, development, manufacture, and verification of a low-cost Arduino-based data acquisition platform to be used in project costs to be reduced and thus facilitating access to this kind of research that requires limited resources. PMID:29382039

Low-cost distributed solar-thermal-electric power generation

Science.gov (United States)

Der Minassians, Artin; Aschenbach, Konrad H.; Sanders, Seth R.

2004-01-01

Due to their high relative cost, solar electric energy systems have yet to be exploited on a widespread basis. It is believed in the energy community that a technology similar to photovoltaic (PV), but offered at about $1/W would lead to widespread deployment at residential and commercial sites. This paper addresses the investigation and feasibility study of a low-cost solar thermal electricity generation technology, suitable for distributed deployment. Specifically, we discuss a system based on nonimaging solar concentrators, integrated with free-piston Stirling engine devices incorporating integrated electric generation. We target concentrator-collector operation at moderate temperatures, in the range of 125°C to 150°C. This temperature is consistent with use of optical concentrators with concentration ratios on the order of 1-2. These low ratio concentrators admit wide angles of radiation acceptance and are thus compatible with no diurnal tracking, and no or only a few seasonal adjustments. Thus, costs and reliability hazards associated with tracking hardware systems are avoided. Further, we note that in the intended application, there is no shortage of incident solar energy, but rather it is the capital cost of the solar-electric system that is most precious. Thus, we outline a strategy for exploiting solar resources in a cost constrained manner. The paper outlines design issues, and a specific design for an appropriately dimensioned free-piston Stirling engine. Only standard low-cost materials and manufacturing methods are required to realize such a machine.

Low-cost solar array structure development

Science.gov (United States)

Wilson, A. H.

1981-06-01

Early studies of flat-plate arrays have projected costs on the order of $50/square meter for installed array support structures. This report describes an optimized low-cost frame-truss structure that is estimated to cost below $25/square meter, including all markups, shipping an installation. The structure utilizes a planar frame made of members formed from light-gauge galvanized steel sheet and is supposed in the field by treated-wood trusses that are partially buried in trenches. The buried trusses use the overburden soil to carry uplift wind loads and thus to obviate reinforced-concrete foundations. Details of the concept, including design rationale, fabrication and assembly experience, structural testing and fabrication drawings are included.

A Low-Cost, Precision Hydrometer for Classroom Use.

Science.gov (United States)

Murphy, Michael D.

1983-01-01

Describes a low cost hydrometer which can be assembled by students using stock laboratory items with a total retail cost of 17 cents. Includes list of required materials (with supplies) and experimental results on the instrument's accuracy. (JM)

Interrelationships Among Men’s Threat Potential, Facial Dominance, and Vocal Dominance

Directory of Open Access Journals (Sweden)

Chengyang Han

2017-03-01

Full Text Available The benefits of minimizing the costs of engaging in violent conflict are thought to have shaped adaptations for the rapid assessment of others’ capacity to inflict physical harm. Although studies have suggested that men’s faces and voices both contain information about their threat potential, one recent study suggested that men’s faces are a more valid cue of their threat potential than their voices are. Consequently, the current study investigated the interrelationships among a composite measure of men’s actual threat potential (derived from the measures of their upper-body strength, height, and weight and composite measures of these men’s perceived facial and vocal threat potential (derived from dominance, strength, and weight ratings of their faces and voices, respectively. Although men’s perceived facial and vocal threat potential were positively correlated, men’s actual threat potential was related to their perceived facial, but not vocal, threat potential. These results present new evidence that men’s faces may be a more valid cue of these aspects of threat potential than their voices are.

Low-cost safety enhancements for stop-controlled and signalized intersections

Science.gov (United States)

2009-05-01

The purpose of this document is to present information on suggested effective, low-cost intersection countermeasures developed using intersection safety research results and input from an intersection safety expert panel. These low-cost countermeasur...

Testing low cost anaerobic digestion (AD) systems

Science.gov (United States)

To evaluate the potential for low technology and low cost digesters for small dairies, BARC and researchers from the University of Maryland installed six modified Taiwanese-model field-scale (FS) digesters near the original dairy manure digester. The FS units receive the same post-separated liquid ...

The effectiveness of online gaming as part of a security awareness program

CSIR Research Space (South Africa)

Labuschagne, WA

2014-07-01

Full Text Available the human element whose actions can be considered as erratic and unpredictable thus posing a threat to the security of the organization. Security awareness programs aim to equip users of cyberspace with the necessary knowledge to identify and mitigate...

Human pluripotent stem cell-derived products: advances towards robust, scalable and cost-effective manufacturing strategies.

Science.gov (United States)

Jenkins, Michael J; Farid, Suzanne S

2015-01-01

The ability to develop cost-effective, scalable and robust bioprocesses for human pluripotent stem cells (hPSCs) will be key to their commercial success as cell therapies and tools for use in drug screening and disease modelling studies. This review outlines key process economic drivers for hPSCs and progress made on improving the economic and operational feasibility of hPSC bioprocesses. Factors influencing key cost metrics, namely capital investment and cost of goods, for hPSCs are discussed. Step efficiencies particularly for differentiation, media requirements and technology choice are amongst the key process economic drivers identified for hPSCs. Progress made to address these cost drivers in hPSC bioprocessing strategies is discussed. These include improving expansion and differentiation yields in planar and bioreactor technologies, the development of xeno-free media and microcarrier coatings, identification of optimal bioprocess operating conditions to control cell fate and the development of directed differentiation protocols that reduce reliance on expensive morphogens such as growth factors and small molecules. These approaches offer methods to further optimise hPSC bioprocessing in terms of its commercial feasibility. © 2014 The Authors. Biotechnology Journal published by Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.

Technology for low cost solid rocket boosters.

Science.gov (United States)

Ciepluch, C.

1971-01-01

A review of low cost large solid rocket motors developed at the Lewis Research Center is given. An estimate is made of the total cost reduction obtainable by incorporating this new technology package into the rocket motor design. The propellant, case material, insulation, nozzle ablatives, and thrust vector control are discussed. The effect of the new technology on motor cost is calculated for a typical expandable 260-in. booster application. Included in the cost analysis is the influence of motor performance variations due to specific impulse and weight changes. It is found for this application that motor costs may be reduced by up to 30% and that the economic attractiveness of future large solid rocket motors will be improved when the new technology is implemented.

Robust Timing Synchronization in Aeronautical Mobile Communication Systems

Science.gov (United States)

Xiong, Fu-Qin; Pinchak, Stanley

2004-01-01

This work details a study of robust synchronization schemes suitable for satellite to mobile aeronautical applications. A new scheme, the Modified Sliding Window Synchronizer (MSWS), is devised and compared with existing schemes, including the traditional Early-Late Gate Synchronizer (ELGS), the Gardner Zero-Crossing Detector (GZCD), and the Sliding Window Synchronizer (SWS). Performance of the synchronization schemes is evaluated by a set of metrics that indicate performance in digital communications systems. The metrics are convergence time, mean square phase error (or root mean-square phase error), lowest SNR for locking, initial frequency offset performance, midstream frequency offset performance, and system complexity. The performance of the synchronizers is evaluated by means of Matlab simulation models. A simulation platform is devised to model the satellite to mobile aeronautical channel, consisting of a Quadrature Phase Shift Keying modulator, an additive white Gaussian noise channel, and a demodulator front end. Simulation results show that the MSWS provides the most robust performance at the cost of system complexity. The GZCD provides a good tradeoff between robustness and system complexity for communication systems that require high symbol rates or low overall system costs. The ELGS has a high system complexity despite its average performance. Overall, the SWS, originally designed for multi-carrier systems, performs very poorly in single-carrier communications systems. Table 5.1 in Section 5 provides a ranking of each of the synchronization schemes in terms of the metrics set forth in Section 4.1. Details of comparison are given in Section 5. Based on the results presented in Table 5, it is safe to say that the most robust synchronization scheme examined in this work is the high-sample-rate Modified Sliding Window Synchronizer. A close second is its low-sample-rate cousin. The tradeoff between complexity and lowest mean-square phase error determines

Recall of threat and submissiveness in childhood and psychopathology: the mediator effect of self-criticism.

Science.gov (United States)

Castilho, Paula; Pinto-Gouveia, José; Amaral, Vânia; Duarte, Joana

2014-01-01

Research has robustly shown that early negative parenting experiences are associated with psychopathology and self-criticism in adulthood. This study investigates recall of personal feelings of perceived threat and subordination in childhood and its relation to psychopathology. In addition, we explore the mediator role of self-criticism in this association. A sample of 193 subjects from the general population completed self-report questionnaires measuring the study variables. The mediator analyses suggested that the impact of submissiveness experiences in childhood on depression and anxiety is mediated by self-criticism. Our findings highlight the route through which the recall of personal feelings of perceived involuntary subordination to parents contributes to depression and anxiety in adulthood. Although the relation between early experiences of abuse and later psychological problems is now well established, there has been less study on subtler forms of threat and subordinate behaviour in childhood. Given ours and previous findings, therapists should be aware of, and prone to explore, these early experiences. Most studies exploring early negative experiences mainly refer to attachment theory-related constructs (e.g., attachment style). We also highlight the importance of noting rank structure and rank style in the family. Self-criticism seems to be a key process in the relation between early aversive experiences of subordination and psychopathology. Given the idea that self-reassuring operates through a different affect system, helping people develop inner warmth and compassion for the self may be important to counteract feelings of self-hatred and self-attack. Copyright © 2012 John Wiley & Sons, Ltd.

Robust Tomato Recognition for Robotic Harvesting Using Feature Images Fusion

Directory of Open Access Journals (Sweden)

Yuanshen Zhao

2016-01-01

Full Text Available Automatic recognition of mature fruits in a complex agricultural environment is still a challenge for an autonomous harvesting robot due to various disturbances existing in the background of the image. The bottleneck to robust fruit recognition is reducing influence from two main disturbances: illumination and overlapping. In order to recognize the tomato in the tree canopy using a low-cost camera, a robust tomato recognition algorithm based on multiple feature images and image fusion was studied in this paper. Firstly, two novel feature images, the  a*-component image and the I-component image, were extracted from the L*a*b* color space and luminance, in-phase, quadrature-phase (YIQ color space, respectively. Secondly, wavelet transformation was adopted to fuse the two feature images at the pixel level, which combined the feature information of the two source images. Thirdly, in order to segment the target tomato from the background, an adaptive threshold algorithm was used to get the optimal threshold. The final segmentation result was processed by morphology operation to reduce a small amount of noise. In the detection tests, 93% target tomatoes were recognized out of 200 overall samples. It indicates that the proposed tomato recognition method is available for robotic tomato harvesting in the uncontrolled environment with low cost.

Robust Tomato Recognition for Robotic Harvesting Using Feature Images Fusion.

Science.gov (United States)

Zhao, Yuanshen; Gong, Liang; Huang, Yixiang; Liu, Chengliang

2016-01-29

Automatic recognition of mature fruits in a complex agricultural environment is still a challenge for an autonomous harvesting robot due to various disturbances existing in the background of the image. The bottleneck to robust fruit recognition is reducing influence from two main disturbances: illumination and overlapping. In order to recognize the tomato in the tree canopy using a low-cost camera, a robust tomato recognition algorithm based on multiple feature images and image fusion was studied in this paper. Firstly, two novel feature images, the  a*-component image and the I-component image, were extracted from the L*a*b* color space and luminance, in-phase, quadrature-phase (YIQ) color space, respectively. Secondly, wavelet transformation was adopted to fuse the two feature images at the pixel level, which combined the feature information of the two source images. Thirdly, in order to segment the target tomato from the background, an adaptive threshold algorithm was used to get the optimal threshold. The final segmentation result was processed by morphology operation to reduce a small amount of noise. In the detection tests, 93% target tomatoes were recognized out of 200 overall samples. It indicates that the proposed tomato recognition method is available for robotic tomato harvesting in the uncontrolled environment with low cost.

Low Cost Processing of Commingled Thermoplastic Composites

Science.gov (United States)

Chiasson, Matthew Lee

A low cost vacuum consolidation process has been investigated for use with commingled thermoplastic matrix composites. In particular, the vacuum consolidation behaviour of commingled polypropylene/glass fibre and commingled nylon/carbon fibre precursors were studied. Laminates were consolidated in a convection oven under vacuum pressure. During processing, the consolidation of the laminate packs was measured by use of non-contact eddy current sensors. The consolidation curves are then used to tune an empirical consolidation model. The overall quality of the resulting laminates is also discussed. Dynamic mechanical analysis, differential scanning calorimetry and mechanical tensile testing were also performed in order to determine the effects of varying processing parameters on the physical and mechanical properties of the laminates. Through this analysis, it was determined that the nylon/carbon fibre blend was not suitable for vacuum consolidation, while the polypropylene/glass fibre blend is a viable option for vacuum consolidation. The ultimate goal of this work is to provide a foundation from which low cost unmanned aerial vehicle (UAV) components can be designed and manufactured from thermoplastic matrix composites using a low cost processing technique as an alternative to traditional thermoset composite materials.

Erosion processes by water in agricultural landscapes: a low-cost methodology for post-event analyses

Science.gov (United States)

Prosdocimi, Massimo; Calligaro, Simone; Sofia, Giulia; Tarolli, Paolo

2015-04-01

Throughout the world, agricultural landscapes assume a great importance, especially for supplying food and a livelihood. Among the land degradation phenomena, erosion processes caused by water are those that may most affect the benefits provided by agricultural lands and endanger people who work and live there. In particular, erosion processes that affect the banks of agricultural channels may cause the bank failure and represent, in this way, a severe threat to floodplain inhabitants and agricultural crops. Similarly, rills and gullies are critical soil erosion processes as well, because they bear upon the productivity of a farm and represent a cost that growers have to deal with. To estimate quantitatively soil losses due to bank erosion and rills processes, area based measurements of surface changes are necessary but, sometimes, they may be difficult to realize. In fact, surface changes due to short-term events have to be represented with fine resolution and their monitoring may entail too much money and time. The main objective of this work is to show the effectiveness of a user-friendly and low-cost technique that may even rely on smart-phones, for the post-event analyses of i) bank erosion affecting agricultural channels, and ii) rill processes occurring on an agricultural plot. Two case studies were selected and located in the Veneto floodplain (northeast Italy) and Marche countryside (central Italy), respectively. The work is based on high-resolution topographic data obtained by the emerging, low-cost photogrammetric method named Structure-from-Motion (SfM). Extensive photosets of the case studies were obtained using both standalone reflex digital cameras and smart-phone built-in cameras. Digital Terrain Models (DTMs) derived from SfM revealed to be effective to estimate quantitatively erosion volumes and, in the case of the bank eroded, deposited materials as well. SfM applied to pictures taken by smartphones is useful for the analysis of the topography

Weighing Efficiency-Robustness in Supply Chain Disruption by Multi-Objective Firefly Algorithm

Directory of Open Access Journals (Sweden)

Tong Shu

2016-03-01

Full Text Available This paper investigates various supply chain disruptions in terms of scenario planning, including node disruption and chain disruption; namely, disruptions in distribution centers and disruptions between manufacturing centers and distribution centers. Meanwhile, it also focuses on the simultaneous disruption on one node or a number of nodes, simultaneous disruption in one chain or a number of chains and the corresponding mathematical models and exemplification in relation to numerous manufacturing centers and diverse products. Robustness of the design of the supply chain network is examined by weighing efficiency against robustness during supply chain disruptions. Efficiency is represented by operating cost; robustness is indicated by the expected disruption cost and the weighing issue is calculated by the multi-objective firefly algorithm for consistency in the results. It has been shown that the total cost achieved by the optimal target function is lower than that at the most effective time of supply chains. In other words, the decrease of expected disruption cost by improving robustness in supply chains is greater than the increase of operating cost by reducing efficiency, thus leading to cost advantage. Consequently, by approximating the Pareto Front Chart of weighing between efficiency and robustness, enterprises can choose appropriate efficiency and robustness for their longer-term development.

A Low Cost Approach to the Design of Autopilot for Hypersonic Glider

Science.gov (United States)

Liang, Wang; Weihua, Zhang; Ke, Peng; Donghui, Wang

2017-12-01

This paper proposes a novel integrated guidance and control (IGC) approach to improve the autopilot design with low cost for hypersonic glider in dive and pull-up phase. The main objective is robust and adaptive tracking of flight path angle (FPA) under severe flight scenarios. Firstly, the nonlinear IGC model is developed with a second order actuator dynamics. Then the adaptive command filtered back-stepping control is implemented to deal with the large aerodynamics coefficient uncertainties, control surface uncertainties and unmatched time-varying disturbances. For the autopilot, a back-stepping sliding mode control is designed to track the control surface deflection, and a nonlinear differentiator is used to avoid direct differentiating the control input. Through a series of 6-DOF numerical simulations, it’s shown that the proposed scheme successfully cancels out the large uncertainties and disturbances in tracking different kinds of FPA trajectory. The contribution of this paper lies in the application and determination of nonlinear integrated design of guidance and control system for hypersonic glider.

Categorizing threat : building and using a generic threat matrix.

Energy Technology Data Exchange (ETDEWEB)

Woodard, Laura; Veitch, Cynthia K.; Thomas, Sherry Reede; Duggan, David Patrick

2007-09-01

The key piece of knowledge necessary for building defenses capable of withstanding or surviving cyber and kinetic attacks is an understanding of the capabilities posed by threats to a government, function, or system. With the number of threats continuing to increase, it is no longer feasible to enumerate the capabilities of all known threats and then build defenses based on those threats that are considered, at the time, to be the most relevant. Exacerbating the problem for critical infrastructure entities is the fact that the majority of detailed threat information for higher-level threats is held in classified status and is not available for general use, such as the design of defenses and the development of mitigation strategies. To reduce the complexity of analyzing threat, the threat space must first be reduced. This is achieved by taking the continuous nature of the threat space and creating an abstraction that allows the entire space to be grouped, based on measurable attributes, into a small number of distinctly different levels. The work documented in this report is an effort to create such an abstraction.

Work-related threats and violence in human service sectors

DEFF Research Database (Denmark)

Andersen, Lars Peter Sønderbo; Hogh, Annie; Biering, Karin

2018-01-01

BACKGROUND: Threats and violence at work are major concerns for employees in many human service sectors. The prevention of work-related violence is a major challenge for employees and management. OBJECTIVE: The purpose of this study was to identify prospective associations between psycho-social w......BACKGROUND: Threats and violence at work are major concerns for employees in many human service sectors. The prevention of work-related violence is a major challenge for employees and management. OBJECTIVE: The purpose of this study was to identify prospective associations between psycho...... rewards at work, low role clarity, many role conflicts, many work-family conflicts and low organizational justice had statistically significant associations with high levels of work-related threats. Furthermore, high emotional demands, low predictability, low role clarity, many role conflicts, many work......-family conflicts, low supervisor quality and low support from nearest supervisor had statistically significant associations with high levels of work-related violence. Finally, across the four sectors both similar and different associations between psycho-social work environment and work-related violence...

Hybrid” airlines – Generating value between low-cost and traditional

Directory of Open Access Journals (Sweden)

Stoenescu Cristina

2017-07-01

Full Text Available Over the last years, the rise of low-cost airlines has determined significant changes in the airline industry and has shaped the evolution of the existing business models. Low-cost airlines started by offering basic services at very low prices; traditional airlines responded by equally cutting costs and reinventing the services offered, with an orientation towards braking down the fare and implementing add-ons, in order to become cost-efficient. As traditional airlines developed strategies to become competitive in this new environment, low-cost airlines started focusing on new ways of enhancing passenger experience and attracting new market segments. As a result, the fragmentation of the market segments addressed by low cost carriers and traditional airlines became less obvious and the characteristics of both business models started to blend at all levels (airline operation, distribution channels, loyalty programs, fleet selection. Thus, this new competition became the foundation of the development of a new „hybrid” carrier, between the low-cost and the traditional models. This article investigates the characteristics of the newly created business model, both from a theoretical perspective and by analysing several case studies. A particular attention will be granted to the evolution of the Romanian carrier Blue Air towards the “hybrid” model. The article focuses on determining the position of the “hybrid” airline in a market with carriers situated along both sides of this business model: lower cost vs. “better” experience and raises the question on how value can be generated in this context. Another aspect tackled is the understanding of the new segmentation of the market, as a consequence of the development of the new business model. In order to achieve this purpose, a survey has been conducted, aiming to mark out the travel preferences of the passengers travelling through the Henri Coandă International Airport.

Robust GPS autonomous signal quality monitoring

Science.gov (United States)

Ndili, Awele Nnaemeka

The Global Positioning System (GPS), introduced by the U.S. Department of Defense in 1973, provides unprecedented world-wide navigation capabilities through a constellation of 24 satellites in global orbit, each emitting a low-power radio-frequency signal for ranging. GPS receivers track these transmitted signals, computing position to within 30 meters from range measurements made to four satellites. GPS has a wide range of applications, including aircraft, marine and land vehicle navigation. Each application places demands on GPS for various levels of accuracy, integrity, system availability and continuity of service. Radio frequency interference (RFI), which results from natural sources such as TV/FM harmonics, radar or Mobile Satellite Systems (MSS), presents a challenge in the use of GPS, by posing a threat to the accuracy, integrity and availability of the GPS navigation solution. In order to use GPS for integrity-sensitive applications, it is therefore necessary to monitor the quality of the received signal, with the objective of promptly detecting the presence of RFI, and thus provide a timely warning of degradation of system accuracy. This presents a challenge, since the myriad kinds of RFI affect the GPS receiver in different ways. What is required then, is a robust method of detecting GPS accuracy degradation, which is effective regardless of the origin of the threat. This dissertation presents a new method of robust signal quality monitoring for GPS. Algorithms for receiver autonomous interference detection and integrity monitoring are demonstrated. Candidate test statistics are derived from fundamental receiver measurements of in-phase and quadrature correlation outputs, and the gain of the Active Gain Controller (AGC). Performance of selected test statistics are evaluated in the presence of RFI: broadband interference, pulsed and non-pulsed interference, coherent CW at different frequencies; and non-RFI: GPS signal fading due to physical blockage and

Rapid mapping using low-cost structure-from-motion photogrammetry expedites the lahar modeling process

Science.gov (United States)

Ratner, Jacqueline; Pyle, David; Mather, Tamsin

2014-05-01

Structure-from-motion (SfM) is a branch of photogrammetry that triangulates points in digital photos to produce a 3D model. When applied to topographical modeling, SfM presents a powerful tool for rapid terrain mapping. At little to no cost and on a timescale of hours, a metric-resolution digital terrain model (DTM) can be produced; the resultant DTM can be used for many types of hazard scenario modeling and is here applied to lahars and floods. This study demonstrates the robustness of the SfM method through two case studies. First, an SfM DTM of Boscastle, UK, is compared against LiDAR and SRTM DTMs in a flood simulation model. Resolution is found to be more robust than for satellite based DTMs, and though less precise than the most detailed LiDAR survey, still perfectly adequate for the purposes of modeling flows. Next, the same method is applied to a region of Ecuador lacking the regionally comprehensive LiDAR survey available in the UK. Compared against the only other topographical data available, (SRTM, ASTER, 1956 topographical map), the SfM DTM is shown to have a higher resolution and is a preferable alternative for modeling lahars. The advantages of this study for emergency management are to provide a cheap and rapid metric-resolution alternative to low resolution or costly topography data sets. In regions such as Ecuador where scientific resources are scarce, SfM assists in providing a thorough, but otherwise unattainable, understanding of potential disaster scenarios that is accessible to local authorities to be used in the disaster prevention and mitigation processes.

Development of a Low-Cost Arduino-Based Sonde for Coastal Applications

Science.gov (United States)

Lockridge, Grant; Dzwonkowski, Brian; Nelson, Reid; Powers, Sean

2016-01-01

This project addresses the need for an expansion in the monitoring of marine environments by providing a detailed description of a low cost, robust, user friendly sonde, built on Arduino Mega 2560 (Mega) and Arduino Uno (Uno) platforms. The sonde can be made without specialized tools or training and can be easily modified to meet individual application requirements. The platform allows for internal logging of multiple parameters of which conductivity, temperature, and GPS position are demonstrated. Two design configurations for different coastal hydrographic applications are highlighted to show the robust and versatile nature of this sensor platform. The initial sonde design was intended for use on a Lagrangian style surface drifter that recorded measurements of temperature; salinity; and position for a deployment duration of less than 24 h. Functional testing of the sensor consisted of a 55 h comparison with a regularly maintained water quality sensor (i.e., YSI 6600 sonde) in Mobile Bay, AL. The temperature and salinity data were highly correlated and had acceptable RMS errors of 0.154 °C and 1.35 psu for the environmental conditions. A second application using the sonde platform was designed for longer duration (~3–4 weeks); subsurface (1.5–4.0 m depths) deployment, moored to permanent structures. Design alterations reflected an emphasis on minimizing power consumption, which included the elimination of the GPS capabilities, increased battery capacity, and power-saving software modifications. The sonde designs presented serve as templates that will expand the hydrographic measurement capabilities of ocean scientists, students, and teachers. PMID:27089337

Development of a Low-Cost Arduino-Based Sonde for Coastal Applications.

Science.gov (United States)

Lockridge, Grant; Dzwonkowski, Brian; Nelson, Reid; Powers, Sean

2016-04-13

This project addresses the need for an expansion in the monitoring of marine environments by providing a detailed description of a low cost, robust, user friendly sonde, built on Arduino Mega 2560 (Mega) and Arduino Uno (Uno) platforms. The sonde can be made without specialized tools or training and can be easily modified to meet individual application requirements. The platform allows for internal logging of multiple parameters of which conductivity, temperature, and GPS position are demonstrated. Two design configurations for different coastal hydrographic applications are highlighted to show the robust and versatile nature of this sensor platform. The initial sonde design was intended for use on a Lagrangian style surface drifter that recorded measurements of temperature; salinity; and position for a deployment duration of less than 24 h. Functional testing of the sensor consisted of a 55 h comparison with a regularly maintained water quality sensor (i.e., YSI 6600 sonde) in Mobile Bay, AL. The temperature and salinity data were highly correlated and had acceptable RMS errors of 0.154 °C and 1.35 psu for the environmental conditions. A second application using the sonde platform was designed for longer duration (~3-4 weeks); subsurface (1.5-4.0 m depths) deployment, moored to permanent structures. Design alterations reflected an emphasis on minimizing power consumption, which included the elimination of the GPS capabilities, increased battery capacity, and power-saving software modifications. The sonde designs presented serve as templates that will expand the hydrographic measurement capabilities of ocean scientists, students, and teachers.

Public Perception of Invasive Plant Species: Assessing the Impact of Workshop Activities to Promote Young Students' Awareness

Science.gov (United States)

Schreck Reis, Catarina; Marchante, Helia; Freitas, Helena; Marchante, Elizabete

2013-01-01

Invasive species are one of the main threats to biodiversity worldwide. Even though they are identified and recognized as such by the Portuguese law, the majority of the population is not yet aware of this problem. Aiming to increase awareness about biological invasions among young students, a workshop on Invasive Plant Species was organized at…

Interaction of threat and verbal working memory in adolescents.

Science.gov (United States)

Patel, Nilam; Vytal, Katherine; Pavletic, Nevia; Stoodley, Catherine; Pine, Daniel S; Grillon, Christian; Ernst, Monique

2016-04-01

Threat induces a state of sustained anxiety that can disrupt cognitive processing, and, reciprocally, cognitive processing can modulate an anxiety response to threat. These effects depend on the level of cognitive engagement, which itself varies as a function of task difficulty. In adults, we recently showed that induced anxiety impaired working memory accuracy at low and medium but not high load. Conversely, increasing the task load reduced the physiological correlates of anxiety (anxiety-potentiated startle). The present work examines such threat-cognition interactions as a function of age. We expected threat to more strongly impact working memory in younger individuals by virtue of putatively restricted cognitive resources and weaker emotion regulation. This was tested by examining the influence of age on the interaction of anxiety and working memory in 25 adolescents (10 to 17 years) and 25 adults (22 to 46 years). Working memory load was manipulated using a verbal n-back task. Anxiety was induced using the threat of an aversive loud scream and measured via eyeblink startle. Findings revealed that, in both age groups, accuracy was lower during threat than safe conditions at low and medium but not high load, and reaction times were faster during threat than safe conditions at high load but did not differ at other loads. Additionally, anxiety-potentiated startle was greater during low and medium than high load. Thus, the interactions of anxiety with working memory appear similar in adolescents and adults. Whether these similarities reflect common neural mechanisms would need to be assessed using functional neuroimaging. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

Contrast in low-cost operational concepts for orbiting satellites

Science.gov (United States)

Walyus, Keith D.; Reis, James; Bradley, Arthur J.

2002-12-01

Older spacecraft missions, especially those in low Earth orbit with telemetry intensive requirements, required round-the-clock control center staffing. The state of technology relied on control center personnel to continually examine data, make decisions, resolve anomalies, and file reports. Hubble Space Telescope (HST) is a prime example of this description. Technological advancements in hardware and software over the last decade have yielded increases in productivity and operational efficiency, which result in lower cost. The re-engineering effort of HST, which has recently concluded, utilized emerging technology to reduce cost and increase productivity. New missions, of which NASA's Transition Region and Coronal Explorer Satellite (TRACE) is an example, have benefited from recent technological advancements and are more cost-effective than when HST was first launched. During its launch (1998) and early orbit phase, the TRACE Flight Operations Team (FOT) employed continually staffed operations. Yet once the mission entered its nominal phase, the FOT reduced their staffing to standard weekday business hours. Operations were still conducted at night and during the weekends, but these operations occurred autonomously without compromising their high standards for data collections. For the HST, which launched in 1990, reduced cost operations will employ a different operational concept, when the spacecraft enters its low-cost phase after its final servicing mission in 2004. Primarily due to the spacecraft"s design, the HST Project has determined that single-shift operations will introduce unacceptable risks for the amount of dollars saved. More importantly, significant cost-savings can still be achieved by changing the operational concept for the FOT, while still maintaining round-the-clock staffing. It"s important to note that the low-cost solutions obtained for one satellite may not be applicable for other satellites. This paper will contrast the differences between

Socio-economic monitoring of hiv/aids threat in the Russian Federation

Directory of Open Access Journals (Sweden)

Valeriy Aleksandrovich Chereshnev

2012-06-01

Full Text Available Thesubject of theinvestigation issocial and economic aspects of thethreat of HIV/AIDS in the Russian Federation.Theinvestigation was aimed at improving socio-economic monitoring of the HIV / AIDS threat. The methodology of systemic analysis and statistical methods were used. Three main sections of socio-economic monitoring of HIV / AIDS were defined with their problems, challenges and areas for improvement. Results of the study are applicable in justifying and shaping public policy to counter the threat of HIV / AIDS. Planned costs of measures to counter thethreat of HIV / AIDS must be based on requirements, allocation and results achieved. Systemic approach to planning requires an analysis of interrelation between costs, requirements and results. The absence of a systemic approach to coordination of costs and requirements leads to inefficient use of resources

Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications

DEFF Research Database (Denmark)

Lu, Kaiyuan; Rasmussen, Peter Omand; Jakobsen, Uffe

2011-01-01

This paper presents a new single-phase, Hybrid Switched Reluctance (HSR) motor for low-cost, low-power, pump or fan drive systems. Its single-phase configuration allows use of a simple converter to reduce the system cost. Cheap ferrite magnets are used and arranged in a special flux concentration...... manner to increase effectively the torque density and efficiency of this machine. The efficiency of this machine is comparable to the efficiency of a traditional permanent magnet machine in the similar power range. The cogging torque, due to the existence of the permanent magnetic field, is beneficially...

Free-floating epithelial micro-tissue arrays: a low cost and versatile technique.

Science.gov (United States)

Flood, P; Alvarez, L; Reynaud, E G

2016-10-11

Three-dimensional (3D) tissue models are invaluable tools that can closely reflect the in vivo physiological environment. However, they are usually difficult to develop, have a low throughput and are often costly; limiting their utility to most laboratories. The recent availability of inexpensive additive manufacturing printers and open source 3D design software offers us the possibility to easily create affordable 3D cell culture platforms. To demonstrate this, we established a simple, inexpensive and robust method for producing arrays of free-floating epithelial micro-tissues. Using a combination of 3D computer aided design and 3D printing, hydrogel micro-moulding and collagen cell encapsulation we engineered microenvironments that consistently direct the growth of micro-tissue arrays. We described the adaptability of this technique by testing several immortalised epithelial cell lines (MDCK, A549, Caco-2) and by generating branching morphology and micron to millimetre scaled micro-tissues. We established by fluorescence and electron microscopy that micro-tissues are polarised, have cell type specific differentiated phenotypes and regain native in vivo tissue qualities. Finally, using Salmonella typhimurium we show micro-tissues display a more physiologically relevant infection response compared to epithelial monolayers grown on permeable filter supports. In summary, we have developed a robust and adaptable technique for producing arrays of epithelial micro-tissues. This in vitro model has the potential to be a valuable tool for studying epithelial cell and tissue function/architecture in a physiologically relevant context.

A complete low cost radon detection system

International Nuclear Information System (INIS)

Bayrak, A.; Barlas, E.; Emirhan, E.; Kutlu, Ç.; Ozben, C.S.

2013-01-01

Monitoring the 222 Rn activity through the 1200 km long Northern Anatolian fault line, for the purpose of earthquake precursory, requires large number of cost effective radon detectors. We have designed, produced and successfully tested a low cost radon detection system (a radon monitor). In the detector circuit of this monitor, First Sensor PS100-7-CER-2 windowless PIN photodiode and a custom made transempedence/shaping amplifier were used. In order to collect the naturally ionized radon progeny to the surface of the PIN photodiode, a potential of 3500 V was applied between the conductive hemi-spherical shell and the PIN photodiode. In addition to the count rate of the radon progeny, absolute pressure, humidity and temperature were logged during the measurements. A GSM modem was integrated to the system for transferring the measurements from the remote locations to the data process center. - Author-Highlights: • Low cost radon detection. • Integrated GSM modem for early warning of radon anomalies. • Radon detection in environment

Motivational indicators of protective behaviour in response to urban water shortage threat

Science.gov (United States)

Mankad, Aditi; Greenhill, Murni; Tucker, David; Tapsuwan, Sorada

2013-05-01

The present study examined the role of protection motivation variables in predicting rainwater tank adoption among urban householders. A regression analysis found that subjective knowledge, threat appraisal, response efficacy, response costs, subjective norms and social norms significantly predicted adaptive behavioural intentions (F(6, 399) = 50.769, p accounted for 43% of the variance in intentions to install a rainwater tank as a protective measure against future water shortages. Results further indicated that several variables uniquely contributed to the prediction of rainwater tank adoption (listed in order of relative contribution: response efficacy, threat appraisal, response costs, subjective knowledge and subjective norms). This suggests that people who perceive there is a real water shortage threat, and believe that rainwater tanks are effective in relieving the threat and require minimal or manageable effort to obtain, are more likely to install a tank on their property as a protective measure. Implications of these results are discussed from a research and policy perspective. Recommendations for future motivational research in the area of urban decentralised system acceptance and adoption are presented.

A Generalized Robust Minimization Framework for Low-Rank Matrix Recovery

Directory of Open Access Journals (Sweden)

Wen-Ze Shao

2014-01-01

Full Text Available This paper considers the problem of recovering low-rank matrices which are heavily corrupted by outliers or large errors. To improve the robustness of existing recovery methods, the problem is solved by formulating it as a generalized nonsmooth nonconvex minimization functional via exploiting the Schatten p-norm (0 < p ≤1 and Lq(0 < q ≤1 seminorm. Two numerical algorithms are provided based on the augmented Lagrange multiplier (ALM and accelerated proximal gradient (APG methods as well as efficient root-finder strategies. Experimental results demonstrate that the proposed generalized approach is more inclusive and effective compared with state-of-the-art methods, either convex or nonconvex.

Cost-effective treatment of low-risk carcinoma not invading bladder muscle.

Science.gov (United States)

Green, David A; Rink, Michael; Cha, Eugene K; Xylinas, Evanguelos; Chughtai, Bilal; Scherr, Douglas S; Shariat, Shahrokh F; Lee, Richard K

2013-03-01

Study Type - Therapy (cost effectiveness analysis) Level of Evidence 2a What's known on the subject? and What does the study add? Bladder cancer is one of the costliest malignancies to treat throughout the life of a patient. The most cost-effective management for low-risk non-muscle-invasive bladder cancer is not known. The current study shows that employing cystoscopic office fulguration for low-risk appearing bladder cancer recurrences can materially impact the cost-effectiveness of therapy. In a follow-up protocol where office fulguration is routinely employed for low-risk bladder cancers, peri-operative intravesical chemotherapy may not provide any additional cost-effectiveness benefit. To examine the cost-effectiveness of fulguration vs transurethral resection of bladder tumour (TURBT) with and without perioperative intravesical chemotherapy (PIC) for managing low-risk carcinoma not invading bladder muscle (NMIBC). Low-risk NMIBC carries a low progression rate, lending support to the use of office-based fulguration for small recurrences rather than traditional TURBT. A Markov state transition model was created to simulate treatment of NMIBC with vs without PIC, with recurrence treated by formal TURBT vs treatment with fulguration. Costing data were obtained from the Medicare Resource Based Relative Value Scale. Data regarding the success of PIC were obtained from the peer-reviewed literature, as were corresponding utilities for bladder cancer-related procedures. Sensitivity analyses were performed. At 5-year follow-up, a strategy of fulguration without PIC was the most cost-effective (mean cost-effectiveness = US $654.8/quality-adjusted life year), despite a lower recurrence rate with PIC. Both fulguration strategies dominated each TURBT strategy. Sensitivity analysis showed that fulguration without PIC dominated all other strategies when the recurrence rate after PIC was increased to ≥14.2% per year. Similarly, the cost-effectiveness of TURBT becomes more

PREVALENCE OF LOW BACK PAIN AND BACK ERGONOMICS AWARENESS AMONG TEACHERS OF SELECTED SECONDARY SCHOOLS IN KANO METROPOLIS

Directory of Open Access Journals (Sweden)

Farida Garba Sumaila

2015-12-01

Full Text Available Background: Low back pain (LBP is regarded as the commonest musculoskeletal problem in the world which affects people across various strata of the society from lay men on the street to teachers as well as health care providers in health institutions. Therefore the purpose of this study is to determine the prevalence of low back pain and back education awareness among secondary school teachers in Kano Metropolis. Methodos: 200 questionnaires were distributed and only 157 were retrieved, one out of which 4 were invalid because of incomplete data so that only 153 were relevant and used for analysis giving a return rate of 76.5%. The study revealed that 96 out of 153 respondents have low back pain implying 62.7% prevalence. The level of back ergonomic awareness on the other hand was found to be moderate (43.1%. Results: Based on the outcomes of the study, it was concluded that there is a high prevalence of low back pain among secondary school teachers in Kano metropolis. However, the level of back ergonomic awareness is moderate. Conclusion: Therefore proper intervention to prevent exposure to LBP among school teachers should be enhanced and teachers should be well educated on the importance of ergonomic intervention in their working environments.

Mission Assurance, Threat Alert, Disaster Resiliency and Response (MATADRR) Product Reference Guide

Science.gov (United States)

2014-06-01

the world. Keystone implants the Google Earth KML ( Keyhole Markup Language) publishing interface to consume the Keystone Work Product sharing. Client...multiple Cores; display, close and archive incidents and work products; and monitor the health and status of the Core. Agreement Services are...to protect forces, mitigate threats, close protection gaps, and provide increased situational awareness by linking the disparate physical

Nuclear threats in the vicinity of the Nordic countries. A database, Nordic Nuclear Safety Research

International Nuclear Information System (INIS)

Margrethe, I.; Eikelmann, H.

2003-01-01

The acute phase of an accident and the possibility of high exposure of the populations are always the most important threats in the emergency preparedness work. Radioactive contamination from an accident can however also cause long time effects for land use and enhanced doses to special population groups and economic problems for agriculture, grazing animals, reindeer industry, hunting, freshwater fishing, tourism and recreation. For planning purposes it is always valuable to be aware of potential radiation hazard and other potential threats in the vicinity of the Nordic countries. Thus, mapping such threats in a Nordic context is an important factor in emergency preparedness in the Nordic countries. The project has dealt with threats from the north west of Russia and the Baltic states. The results from the different activities in the project is generated in a web based database called the 'the base of knowledge'. (orig.)

Preliminary Tests of a New Low-Cost Photogrammetric System

Science.gov (United States)

Santise, M.; Thoeni, K.; Roncella, R.; Sloan, S. W.; Giacomini, A.

2017-11-01

This paper presents preliminary tests of a new low-cost photogrammetric system for 4D modelling of large scale areas for civil engineering applications. The system consists of five stand-alone units. Each of the units is composed of a Raspberry Pi 2 Model B (RPi2B) single board computer connected to a PiCamera Module V2 (8 MP) and is powered by a 10 W solar panel. The acquisition of the images is performed automatically using Python scripts and the OpenCV library. Images are recorded at different times during the day and automatically uploaded onto a FTP server from where they can be accessed for processing. Preliminary tests and outcomes of the system are discussed in detail. The focus is on the performance assessment of the low-cost sensor and the quality evaluation of the digital surface models generated by the low-cost photogrammetric systems in the field under real test conditions. Two different test cases were set up in order to calibrate the low-cost photogrammetric system and to assess its performance. First comparisons with a TLS model show a good agreement.

PRELIMINARY TESTS OF A NEW LOW-COST PHOTOGRAMMETRIC SYSTEM

Directory of Open Access Journals (Sweden)

M. Santise

2017-11-01

Full Text Available This paper presents preliminary tests of a new low-cost photogrammetric system for 4D modelling of large scale areas for civil engineering applications. The system consists of five stand-alone units. Each of the units is composed of a Raspberry Pi 2 Model B (RPi2B single board computer connected to a PiCamera Module V2 (8 MP and is powered by a 10 W solar panel. The acquisition of the images is performed automatically using Python scripts and the OpenCV library. Images are recorded at different times during the day and automatically uploaded onto a FTP server from where they can be accessed for processing. Preliminary tests and outcomes of the system are discussed in detail. The focus is on the performance assessment of the low-cost sensor and the quality evaluation of the digital surface models generated by the low-cost photogrammetric systems in the field under real test conditions. Two different test cases were set up in order to calibrate the low-cost photogrammetric system and to assess its performance. First comparisons with a TLS model show a good agreement.

Phonemic awareness as a pathway to number transcoding

Directory of Open Access Journals (Sweden)

Júlia Beatriz Lopes-Silva

2014-01-01

Full Text Available Although verbal and numerical abilities have a well-established interaction, the impact of phonological processing on numeric abilities remains elusive. The aim of this study is to investigate the role of phonemic awareness in number processing and to explore its association with other functions such as working memory and magnitude processing. One hundred seventy-two children in 2nd grade to 4th grade were evaluated in terms of their intelligence, number transcoding, phonemic awareness, verbal and visuospatial working memory and number sense (nonsymbolic magnitude comparison performance. All of the children had normal intelligence. Among these measurements of magnitude processing, working memory and phonemic awareness, only the last was retained in regression and path models predicting transcoding ability. Phonemic awareness mediated the influence of verbal working memory on number transcoding. The evidence suggests that phonemic awareness significantly affects number transcoding. Such an association is robust and should be considered in cognitive models of both dyslexia and dyscalculia.

Low cost thermal solar collector

International Nuclear Information System (INIS)

Abugderah, M. M.; Schneider, E. L.; Tontini, M. V.

2006-01-01

Solar energy is a good alternative in the economy of the electric energy mainly for the water heating. However, the solar heaters used demand a high initial investment, becoming the warm water from solar energy inaccessible to a large part of the society. Thus, a low cost solar heater was developed, constructed and tested in the chemical engineering department of West Parana State University-Unioeste. This equipment consists of 300 cans, divided in 30 columns of 10 cans each, all painted in black to enhance the obsorption of the solar radiation. The columns are connected to a pipe of pvc of 8 liters with 0.085m of external diameter. The equipment is capable to heat 120 liters of water in temperatures around 60 degree centigrade. The heater is insolated in its inferior part with cardboard and aluminum, covered with a transparent plastic in its superior. The system still counts with a insulated thermal reservoir, which can conserve the water in temperatures adjusted for the night non-solar days domestic use. The advantage of the constructed is it low cost material. The results are given an graphical tabular from showing acceptable efficiencies.(Autho

Low cost nuclear data printer

International Nuclear Information System (INIS)

Punnachiya, S.; Aungkultewaraksa, S.; Pengphol, S.

1988-01-01

The data printer is essential for nuclear radiation measuring system. A low cost nuclear data printer is developed from an electronic printing calculator. It can transfer the counting data from scaler and printout. The basic concept is that the BCD data is transferred and converted to decimal data sequentially by the interfacing circuit. After the counting time is ended, each digit is transferred to the printing calculator by data bus, digit by digit, until all the data are transferred and printed out. The low cost nuclear data printer consists of a CASIO model HR-8 electronic printing calculator and a printer interface model either NT 2602 or NT 2603 which are designed for printing out 6 digit data from the counter/timer CANBERRA model 1772. In this research the NT 2602 interface is designed only to transfer and printing out data. While the NT 2603 interface is designed to transfer, print out and average data. The NT 2603 can average from 2 to 9 sets of counting data. This data interfacing technique can be applied to work with all scientific instruments having readout as digital display and all kinds of electronic printing calculator

LCX: Proposal for a low-cost commercial transport

Science.gov (United States)

Hartman, Troy; Hayatdavoudi, Maziar; Hettinga, Joel; Hooper, Matt; Nguyen, Phong

1994-01-01

The LCX has been developed in response to a request for proposal for an aircraft with 153 passenger capacity and a range of 3000 nautical miles. The goals of the LCX are to provide an aircraft which will achieve the stated mission requirements at the lowest cost possible, both for the manufacturer and the operator. Low cost in this request is defined as short and long term profitability. To achieve this objective, modern technologies attributing to low-cost operation without greatly increasing the cost of manufacturing were employed. These technologies include hybrid laminar flow control and the use of developing new manufacturing processes and philosophies. The LCX will provide a competitive alternative to the use of the Airbus A319/320/321 and the Boeing 737 series of aircraft. The LCX has a maximum weight of 150,000 lb. carried by a wing of 1140 ft(exp 2) and an aspect ratio of 10. The selling price of the LCX is 31 million in 1994 US dollars.

Identifying and assessing environmental awareness of hotel and restaurant employees' attitudes in the Amasra District of Bartin.

Science.gov (United States)

Yucedag, Cengiz; Kaya, Latif Gurkan; Cetin, Mehmet

2018-01-05

Environmental damage occurring on individual, institutional, and societal levels is one of the major problems in the world and results from mostly unconscious human behavior. This damage poses serious threats to human health and other habitats. The aim of this study is to determine the level of environmental awareness of hotel and restaurant employees in the Amasra District of Bartin, Turkey. For this purpose, a descriptive survey method is used to measure 16 items with a 5-point Likert scale. Data are obtained from 200 employees in the hotels and restaurants as of 2015. The reliability coefficient is found to be 0.74. This data reveals that only 43% of hotels and 72% of restaurants in Amasra have recycling bins. Males and Bachelor's degree holders have more environmental awareness. Enterprises established after 2011 follow popular journals related to environment more than those before 2011. As a result, it is essential to organize educational meetings and seminars related to environmental awareness for hotel and restaurant employees in order to improve the tourism industry's environmental impact. The results show that the legislation has resulted in general environmental awareness and that the organizations are willing to change their business processes and environmental strategies. Nevertheless, despite their actions, there is little awareness of the benefits that can result from cost reductions resulting from environmentally friendly practices. Those affected by their suppliers act to reduce waste but do not deploy formal environmental management systems or use environmental messages to market their goods or services.

High-precision and low-cost vibration generator for low-frequency calibration system

Science.gov (United States)

Li, Rui-Jun; Lei, Ying-Jun; Zhang, Lian-Sheng; Chang, Zhen-Xin; Fan, Kuang-Chao; Cheng, Zhen-Ying; Hu, Peng-Hao

2018-03-01

Low-frequency vibration is one of the harmful factors that affect the accuracy of micro-/nano-measuring machines because its amplitude is significantly small and it is very difficult to avoid. In this paper, a low-cost and high-precision vibration generator was developed to calibrate an optical accelerometer, which is self-designed to detect low-frequency vibration. A piezoelectric actuator is used as vibration exciter, a leaf spring made of beryllium copper is used as an elastic component, and a high-resolution, low-thermal-drift eddy current sensor is applied to investigate the vibrator’s performance. Experimental results demonstrate that the vibration generator can achieve steady output displacement with frequency range from 0.6 Hz to 50 Hz, an analytical displacement resolution of 3.1 nm and an acceleration range from 3.72 mm s-2 to 1935.41 mm s-2 with a relative standard deviation less than 1.79%. The effectiveness of the high-precision and low-cost vibration generator was verified by calibrating our optical accelerometer.

Using Length of Stay to Control for Unobserved Heterogeneity When Estimating Treatment Effect on Hospital Costs with Observational Data: Issues of Reliability, Robustness, and Usefulness.

Science.gov (United States)

May, Peter; Garrido, Melissa M; Cassel, J Brian; Morrison, R Sean; Normand, Charles

2016-10-01

To evaluate the sensitivity of treatment effect estimates when length of stay (LOS) is used to control for unobserved heterogeneity when estimating treatment effect on cost of hospital admission with observational data. We used data from a prospective cohort study on the impact of palliative care consultation teams (PCCTs) on direct cost of hospital care. Adult patients with an advanced cancer diagnosis admitted to five large medical and cancer centers in the United States between 2007 and 2011 were eligible for this study. Costs were modeled using generalized linear models with a gamma distribution and a log link. We compared variability in estimates of PCCT impact on hospitalization costs when LOS was used as a covariate, as a sample parameter, and as an outcome denominator. We used propensity scores to account for patient characteristics associated with both PCCT use and total direct hospitalization costs. We analyzed data from hospital cost databases, medical records, and questionnaires. Our propensity score weighted sample included 969 patients who were discharged alive. In analyses of hospitalization costs, treatment effect estimates are highly sensitive to methods that control for LOS, complicating interpretation. Both the magnitude and significance of results varied widely with the method of controlling for LOS. When we incorporated intervention timing into our analyses, results were robust to LOS-controls. Treatment effect estimates using LOS-controls are not only suboptimal in terms of reliability (given concerns over endogeneity and bias) and usefulness (given the need to validate the cost-effectiveness of an intervention using overall resource use for a sample defined at baseline) but also in terms of robustness (results depend on the approach taken, and there is little evidence to guide this choice). To derive results that minimize endogeneity concerns and maximize external validity, investigators should match and analyze treatment and comparison arms

Low-cost in vitro fertilization: current insights

Science.gov (United States)

Teoh, Pek Joo; Maheshwari, Abha

2014-01-01

Despite the development of in vitro fertilization (IVF) more than 30 years ago, the cost of treatment remains high. Furthermore, over the years, more sophisticated technologies and expensive medications have been introduced, making IVF increasingly inaccessible despite the increasing need. Globally, the option to undergo IVF is only available to a privileged few. In recent years, there has been growing interest in exploring strategies to reduce the cost of IVF treatment, which would allow the service to be provided in low-resource settings. In this review, we explore the various ways in which the cost of this treatment can be reduced. PMID:25187741

THE MARKETING MIX FOR LOW COST HEALTHCARE

OpenAIRE

Julie George; Dr. Manita D. Shah

2017-01-01

The Indian health care industry has a history of dealing with poor doctor-patient ratio, shortage of medical professionals, poor health infrastructure, and low expenditure on healthcare information technology; steep out of pocket spending (OOP), low health insurance coverage, inadequate government spending, poor access to health care facilities and social stigma related to diseases. The unique mindset and ability for frugality has successfully been applied in offering low cost healthcare of u...

Low-cost encapsulation materials for terrestrial solar cell modules

Science.gov (United States)

Cuddihy, E. F.; Baum, B.; Willis, P.

1979-01-01

The paper presents the findings of material surveys intended to identify low cost materials which could be functional as encapsulants (by 1986) for terrestrial solar cell modules. Economic analyses have indicated that in order to meet the low cost goal of $2.70 per sq m, some or all of the following material technologies must be developed or advanced: (1) UV screening outer covers; (2) elastomeric acrylics; (3) weatherproofing and waterproofing of structural wood and paper products; (4) transparent UV stabilizers for the UV-sensitive transparent pottants; and (5) cost-effective utilization of silicone and fluorocarbon materials.

'Greening' Gweru urban tourist lodges: low levels of ecoliteracy, green awareness and actions

Directory of Open Access Journals (Sweden)

DK Nyahunzvi

2014-01-01

Full Text Available This paper reports on the findings of an exploratory study on the level of environmental awareness and engagement among Gweru urban lodges. The study's data collection instruments were a survey questionnaire, personal observations, follow-up interviews and document analysis. The key finding of the study was that there were low levels of ecoliteracy and environmental awareness and consequently, limited 'green actions' undertaken by lodge managers. It was also found that not a single tourist lodge had a formal written environmental policy whilst the lodge managers expressed a need for the provision of information and education around green tourism. A conclusion is reached that this study's findings are consistent with studies elsewhere that bemoan the limited nature of green actions undertaken by tourism Small, Medium and Micro Enterprises (SMMEs. The study ends with recommendations and an indication of future research priorities.

Are iso-osmolar, as compared to low-osmolar, contrast media cost-effective in patients undergoing cardiac catheterization? An economic analysis.

Science.gov (United States)

Hiremath, Swapnil; Akbari, Ayub; Wells, George A; Chow, Benjamin J W

2018-04-23

Contrast-induced acute kidney injury is a prominent complication following cardiac catheterization, though the risk has progressively decreased in recent times with appropriate risk stratification and use of safer contrast agents. Despite data supporting further lowering of risk with the iso-osmolar agent, iodixanol, uptake has lagged, perhaps due to increased upfront cost of this agent. We undertook an economic analysis to estimate the cost-effectiveness of a strategy utilizing iodixanol compared to using a low-osmolar contrast agent. We created a Markov model to evaluate the two strategies, and included a differential relative risk of contrast-induced acute kidney injury, based on a systematic review of the literature. Downstream clinical events, including need for dialysis and mortality, were modeled using data from existing published literature. A third-party payer perspective was utilized for the analysis and presentation of the primary economic analysis. The strategy of using iodixanol dominated in both the low-risk and high-risk base case analyses. However, the difference was quite small in the low-risk scenario (lifetime cost: C$678,034 vs. C$678,059 and life expectancy: 19.80 vs. 19.72 years). The difference was more marked (life expectancy 15.65 vs. 14.15 years and cost C$680,989 vs. C$682,023) in the high-risk case analysis. This was robust across most of the variables tested in sensitivity analyses. The use of iodixanol, compared with low-osmolar contrast agents, for cardiac catheterization, results in a small benefit clinical outcomes, and in a savings in direct healthcare costs. Overall, our analysis supports the use of iodixanol for cardiac catheterization, especially in patients at high risk of acute kidney injury.

Cyber threat metrics.

Energy Technology Data Exchange (ETDEWEB)

Frye, Jason Neal; Veitch, Cynthia K.; Mateski, Mark Elliot; Michalski, John T.; Harris, James Mark; Trevino, Cassandra M.; Maruoka, Scott

2012-03-01

Threats are generally much easier to list than to describe, and much easier to describe than to measure. As a result, many organizations list threats. Fewer describe them in useful terms, and still fewer measure them in meaningful ways. This is particularly true in the dynamic and nebulous domain of cyber threats - a domain that tends to resist easy measurement and, in some cases, appears to defy any measurement. We believe the problem is tractable. In this report we describe threat metrics and models for characterizing threats consistently and unambiguously. The purpose of this report is to support the Operational Threat Assessment (OTA) phase of risk and vulnerability assessment. To this end, we focus on the task of characterizing cyber threats using consistent threat metrics and models. In particular, we address threat metrics and models for describing malicious cyber threats to US FCEB agencies and systems.

Investment opportunity : the FPL low-cost solar dry kiln

Science.gov (United States)

George B. Harpole

1988-01-01

Two equations are presented that may be used to estimate a maximum investment limit and working capital requirements for the FPL low-cost solar dry kiln systems. The equations require data for drying cycle time, green lumber cost, and kiln-dried lumber costs. Results are intended to provide a preliminary estimate.

Career Management and Employee Motivation in Low Skilled, Low Margin Environments

International Nuclear Information System (INIS)

Salman, S; Khan, A

2014-01-01

Career management enhances the level of motivation, resilience, awareness and the direction of employees' careers goals relative to the existing job opportunities within and outside an organisation. The main aim of this paper is to evaluate how a low-skilled company environment can use career management as a tool for employee motivation. While using Company A (Food company) as its case study organisation, the research utilises an interpretivism philosophy, deductive research approach, case study research strategy, and random sampling method. Primary data is collected by way of interviews and questionnaires and analysed using coding method. The study establishes that Company A has a robust employee career management programme. This programme is based on both short-term and long-term goals and aims to meet both individual employees' and organisation-wide goals. Specifically, the study establishes that Company A employee career management programme helps employees to make wise career decisions, become aware of available career opportunities, set career goals, execute career goals, explore their careers, and experience career progression. The findings have implications for employee motivation in other low skilled work environments

Analyzing Cyber-Physical Threats on Robotic Platforms †

Science.gov (United States)

2018-01-01

Robots are increasingly involved in our daily lives. Fundamental to robots are the communication link (or stream) and the applications that connect the robots to their clients or users. Such communication link and applications are usually supported through client/server network connection. This networking system is amenable of being attacked and vulnerable to the security threats. Ensuring security and privacy for robotic platforms is thus critical, as failures and attacks could have devastating consequences. In this paper, we examine several cyber-physical security threats that are unique to the robotic platforms; specifically the communication link and the applications. Threats target integrity, availability and confidential security requirements of the robotic platforms, which use MobileEyes/arnlServer client/server applications. A robot attack tool (RAT) was developed to perform specific security attacks. An impact-oriented approach was adopted to analyze the assessment results of the attacks. Tests and experiments of attacks were conducted in simulation environment and physically on the robot. The simulation environment was based on MobileSim; a software tool for simulating, debugging and experimenting on MobileRobots/ActivMedia platforms and their environments. The robot platform PeopleBotTM was used for physical experiments. The analysis and testing results show that certain attacks were successful at breaching the robot security. Integrity attacks modified commands and manipulated the robot behavior. Availability attacks were able to cause Denial-of-Service (DoS) and the robot was not responsive to MobileEyes commands. Integrity and availability attacks caused sensitive information on the robot to be hijacked. To mitigate security threats, we provide possible mitigation techniques and suggestions to raise awareness of threats on the robotic platforms, especially when the robots are involved in critical missions or applications. PMID:29883403

Design of low cost glaucoma screening

NARCIS (Netherlands)

Niessen, A. G.; Langerhorst, C. T.; Geijssen, H. C.; Greve, E. L.

1997-01-01

In 1991 the Netherlands Glaucoma Patient Association organized a glaucoma screening survey. This survey was designed to evaluate the effectiveness of a low cost screening setting. During a screening period of 8 days, 1259 subjects over the age of 49 years were examined by a team of

The Threat Among Us: Insiders Intensify Aviation Terrorism

Energy Technology Data Exchange (ETDEWEB)

Krull, Katie E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-08-19

Aviation terrorism is powerful and symbolic, and will likely remain a staple target for terrorists aiming to inflict chaos and cause mass casualties similar to the 9/11 attacks on the U.S. The majority of international and domestic aviation terrorist attacks involves outsiders, or people who do not have direct access to or affiliation with a target through employment. However, several significant attacks and plots against the industry involved malicious employees motivated by suicide or devotion to a terrorist organization. Malicious insiders’ access and knowledge of aviation security, systems, networks, and infrastructure is valuable to terrorists, providing a different pathway for attacking the industry through the insider threat. Indicators and warnings of insider threats in these cases exist, providing insight into how security agencies, such as the Transportation Security Administration, can better predict and identify insider involvement. Understanding previous aviation insider threat events will likely aid in stimulating proactive security measures, rather than reactive responses. However, similar to traditional airport security measures, there are social, political, and economic challenges in protecting against the insider threat, including privacy concerns and cost-benefit analysis.

Automated recognition and tracking of aerosol threat plumes with an IR camera pod

Science.gov (United States)

Fauth, Ryan; Powell, Christopher; Gruber, Thomas; Clapp, Dan

2012-06-01

Protection of fixed sites from chemical, biological, or radiological aerosol plume attacks depends on early warning so that there is time to take mitigating actions. Early warning requires continuous, autonomous, and rapid coverage of large surrounding areas; however, this must be done at an affordable cost. Once a potential threat plume is detected though, a different type of sensor (e.g., a more expensive, slower sensor) may be cued for identification purposes, but the problem is to quickly identify all of the potential threats around the fixed site of interest. To address this problem of low cost, persistent, wide area surveillance, an IR camera pod and multi-image stitching and processing algorithms have been developed for automatic recognition and tracking of aerosol plumes. A rugged, modular, static pod design, which accommodates as many as four micro-bolometer IR cameras for 45deg to 180deg of azimuth coverage, is presented. Various OpenCV1 based image-processing algorithms, including stitching of multiple adjacent FOVs, recognition of aerosol plume objects, and the tracking of aerosol plumes, are presented using process block diagrams and sample field test results, including chemical and biological simulant plumes. Methods for dealing with the background removal, brightness equalization between images, and focus quality for optimal plume tracking are also discussed.

Authenticated Location-Aware Publish/Subscribe Services in Untrusted Outsourced Environments

Directory of Open Access Journals (Sweden)

Han Yan

2017-01-01

Full Text Available Location-aware publish/subscribe is an important location-based service based on server-initiated model. Often times, the owner of massive spatio-textual messages and subscriptions outsources its location-aware publish/subscribe services to a third-party service provider, for example, cloud service provider, who is responsible for delivering messages to their relevant subscribers. The issue arising here is that the messages delivered by the service provider might be tailored for profit purposes, intentionally or not. Therefore, it is essential to develop mechanisms which allow subscribers to verify the correctness of the messages delivered by the service provider. In this paper, we study the problem of authenticating messages in outsourced location-aware publish/subscribe services. We propose an authenticated framework which not only can deliver the messages efficiently but also can make the subscribers’ authentication available with low cost. Extensive experiments on a real-world dataset demonstrate the effectiveness and efficiency of our proposed authenticated framework.

Mounting dengue awareness: A cost effective Strategy for prevention

Directory of Open Access Journals (Sweden)

Kajal Srivastava

2015-12-01

Full Text Available Background: Dengue is a serious illness which takes toll on human health every year. The best way to prevent it is by increasing awareness among common people. This study was conducted to assess the level of knowledge, attitudes and practices regarding dengue fever in people urban heath training centre in Pune, Maharashtra. Methods: A cross-sectional study was conducted among patients attending OPD of Urban heath training centre of department of community medicine, Pune situated in Ajmera, Pimpri, Pune. Through convenience sampling, a questionnaire was administered to patients after taking their informed consent. Results: A total of 100 patients were interviewed. Among knowledge 83% had heard about dengue and the most common source of information was TV & radio (72.3% Most of them were aware regarding mosquito bite being the mode of dengue transmission (80.7%. 22% were unaware regarding biting time of mosquito while 22% said night is the biting time of dengue mosquito. 62.7% were using coils for mosquito bite prevention followed by mosquito net (43.4% and spray (31.3%.. Conclusion: This study revealed that most of the study population is aware of dengue illness and increasing education level is having positive attitude on dengue illness.

Mounting dengue awareness: A cost effective Strategy for prevention

Directory of Open Access Journals (Sweden)

Kajal Srivastava

2015-12-01

Full Text Available Background: Dengue is a serious illness which takes toll on human health every year. The best way to prevent it is by increasing awareness among common people. This study was conducted to assess the level of knowledge, attitudes and practices regarding dengue fever in people urban heath training centre in Pune, Maharashtra. Methods: A cross-sectional study was conducted among patients attending OPD of Urban heath training centre of department of community medicine, Pune situated in Ajmera, Pimpri, Pune. Through convenience sampling, a questionnaire was administered to patients after taking their informed consent. Results: A total of 100 patients were interviewed. Among knowledge 83% had heard about dengue and the most common source of information was TV & radio (72.3% Most of them were aware regarding mosquito bite being the mode of dengue transmission (80.7%. 22% were unaware regarding biting time of mosquito while 22% said night is the biting time of dengue mosquito. 62.7% were using coils for mosquito bite prevention followed by mosquito net (43.4% and spray (31.3%.. Conclusion: This study revealed that most of the study population is aware of dengue illness and increasing education level is having positive attitude on dengue illness.

Robust design optimization method for centrifugal impellers under surface roughness uncertainties due to blade fouling

Science.gov (United States)

Ju, Yaping; Zhang, Chuhua

2016-03-01

Blade fouling has been proved to be a great threat to compressor performance in operating stage. The current researches on fouling-induced performance degradations of centrifugal compressors are based mainly on simplified roughness models without taking into account the realistic factors such as spatial non-uniformity and randomness of the fouling-induced surface roughness. Moreover, little attention has been paid to the robust design optimization of centrifugal compressor impellers with considerations of blade fouling. In this paper, a multi-objective robust design optimization method is developed for centrifugal impellers under surface roughness uncertainties due to blade fouling. A three-dimensional surface roughness map is proposed to describe the nonuniformity and randomness of realistic fouling accumulations on blades. To lower computational cost in robust design optimization, the support vector regression (SVR) metamodel is combined with the Monte Carlo simulation (MCS) method to conduct the uncertainty analysis of fouled impeller performance. The analyzed results show that the critical fouled region associated with impeller performance degradations lies at the leading edge of blade tip. The SVR metamodel has been proved to be an efficient and accurate means in the detection of impeller performance variations caused by roughness uncertainties. After design optimization, the robust optimal design is found to be more efficient and less sensitive to fouling uncertainties while maintaining good impeller performance in the clean condition. This research proposes a systematic design optimization method for centrifugal compressors with considerations of blade fouling, providing a practical guidance to the design of advanced centrifugal compressors.

Damping of Low Frequency Oscillation in Power System using Robust Control of Superconductor Flywheel Energy Storage System

International Nuclear Information System (INIS)

Lee, Jung Pil; Kim, Han Gun

2012-01-01

In this paper, the robust superconductor flywheel energy storage system(SFESS) controller using H control theory was designed to damp low frequency oscillation of power system. The main advantage of the controller is that uncertainties of power system can be included at the stage of controller design. Both disturbance attenuation and robust stability for the power system were treated simultaneously by using mixed sensitivity problem. The robust stability and the performance for uncertainties of power system were represented by frequency weighted transfer function. To verify control performance of proposed SFESS controller using control, the closed loop eigenvalue and the damping ratio in dominant oscillation mode of power system were analyzed and nonlinear simulation for one-machine infinite bus system was performed under disturbance for various operating conditions. The results showed that the proposed SFESS controller was more robust than conventional power system stabilizer (PSS).

Low-Cost IoT: A Holistic Approach

Directory of Open Access Journals (Sweden)

Augusto Ciuffoletti

2018-05-01

Full Text Available The key factors for a successful smart-city project are its initial cost and its scalability. The initial cost depends on several inter-related aspects that cannot be designed and optimized separately. After the pilot deployment, scaling-up takes place only if the cost remains affordable: an initial financial support may induce dependencies from technologies that become unsustainable in the long period. In addition, the initial adoption of an emerging technology that fails to affirm may jeopardize investment return. This paper investigates a smart-village use case, the success of which strongly depends on the initial cost and scalability, exploring a low-cost way for Internet of Things (IoT. We propose a simple conceptual framework for cost evaluation, and we verify its effectiveness with an exhaustive use case: a prototype sensor designed and tested with its surrounding eco-system. Using experimental results, we can estimate both performance and cost for a pilot system made of fifty sensors deployed in an urban area. We show that such cost grows linearly with system size, taking advantage of widely adopted technologies. The code and the design of the prototype are available, so that all steps are reproducible.

Uncertainty and Risk Management in Cyber Situational Awareness

Science.gov (United States)

Li, Jason; Ou, Xinming; Rajagopalan, Raj

Handling cyber threats unavoidably needs to deal with both uncertain and imprecise information. What we can observe as potential malicious activities can seldom give us 100% confidence on important questions we care about, e.g. what machines are compromised and what damage has been incurred. In security planning, we need information on how likely a vulnerability can lead to a successful compromise to better balance security and functionality, performance, and ease of use. These information are at best qualitative and are often vague and imprecise. In cyber situational awareness, we have to rely on such imperfect information to detect real attacks and to prevent an attack from happening through appropriate risk management. This chapter surveys existing technologies in handling uncertainty and risk management in cyber situational awareness.

Basic Auditory Processing Skills and Phonological Awareness in Low-IQ Readers and Typically Developing Controls

Science.gov (United States)

Kuppen, Sarah; Huss, Martina; Fosker, Tim; Fegan, Natasha; Goswami, Usha

2011-01-01

We explore the relationships between basic auditory processing, phonological awareness, vocabulary, and word reading in a sample of 95 children, 55 typically developing children, and 40 children with low IQ. All children received nonspeech auditory processing tasks, phonological processing and literacy measures, and a receptive vocabulary task.…

The application of nuclear and national security safeguard strategies to the insider threat in the private sector

International Nuclear Information System (INIS)

Campbell, G.K.

1991-01-01

This paper reports that the insider threat in commercial enterprises represents multi-billion dollar losses on an annual basis. While much of this experience is in low value, theft-related shrinkage, there are a growing number of organizations where the loss or compromise of critical assets or interruption of vital systems cannot be tolerated. In very real ways, the survival of the organization may turn on the hostile acts of knowledgeable insiders. The nuclear and National security information operations environments represents a baseline of experience from which the corporate world can draw for cost-effective, alternative approaches to this threat. However, it is equally clear that there are a variety of subtle and obvious constraints imposed by the private sector's mission, service delivery, lifestyle and cost-benefit requirements which dictate careful planning and user involvement in safeguards development and application. Where protection of our National security assets are grounded in a consequence-driven set of policies and standards, the private sector is often subject to the lack of a similar (but directly analogous) policy foundation

Median Robust Extended Local Binary Pattern for Texture Classification.

Science.gov (United States)

Liu, Li; Lao, Songyang; Fieguth, Paul W; Guo, Yulan; Wang, Xiaogang; Pietikäinen, Matti

2016-03-01

Local binary patterns (LBP) are considered among the most computationally efficient high-performance texture features. However, the LBP method is very sensitive to image noise and is unable to capture macrostructure information. To best address these disadvantages, in this paper, we introduce a novel descriptor for texture classification, the median robust extended LBP (MRELBP). Different from the traditional LBP and many LBP variants, MRELBP compares regional image medians rather than raw image intensities. A multiscale LBP type descriptor is computed by efficiently comparing image medians over a novel sampling scheme, which can capture both microstructure and macrostructure texture information. A comprehensive evaluation on benchmark data sets reveals MRELBP's high performance-robust to gray scale variations, rotation changes and noise-but at a low computational cost. MRELBP produces the best classification scores of 99.82%, 99.38%, and 99.77% on three popular Outex test suites. More importantly, MRELBP is shown to be highly robust to image noise, including Gaussian noise, Gaussian blur, salt-and-pepper noise, and random pixel corruption.

Threats and surprises behind IPv6 extension headers

NARCIS (Netherlands)

Hendriks, Luuk; Velan, Petr; de Oliveira Schmidt, Ricardo; De Boer, Pieter Tjerk; Pras, Aiko

2017-01-01

The concept of Extension Headers, newly introduced with IPv6, is elusive and enables new types of threats in the Internet. Simply dropping all traffic containing any Extension Header - a current practice by operators-seemingly is an effective solution, but at the cost of possibly dropping legitimate

The role of perceived threat in the emergence of PTSD and depression symptoms during warzone deployment.

Science.gov (United States)

Lancaster, Cynthia L; Cobb, Adam R; Lee, Han-Joo; Telch, Michael J

2016-07-01

Numerous studies have shown that level of exposure to combat-related stressors is a robust risk factor for posttraumatic stress disorder (PTSD) and depression among military personnel deployed to a warzone. Threat perception of warzone experiences assessed retrospectively has been consistently linked to increased risk for PTSD and depression months or even years after returning from deployment. However, little is known about concurrent relations between perceived threat, deployment stress, and stress-related symptoms during deployment. Using a novel in-theater web-based assessment system, we investigated the unique and joint contribution of threat perception and deployment stressors in predicting the emergence of PTSD and depression symptoms during deployment. Soldiers (N = 150) completed assessments of deployment stressors, perceived threat, PTSD symptoms, and depression symptoms throughout deployment to Iraq. Results revealed that perceived threat potentiated the increase in PTSD symptoms as a result of increases in deployment stressors. In contrast, perceived threat, but not warzone stressors, uniquely predicted depression symptoms. Results highlight the important role of threat perception as a risk marker for the acute experience of depression and PTSD symptoms during deployment. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Prefrontal control of attention to threat

Directory of Open Access Journals (Sweden)

Polly V Peers

2013-02-01

Full Text Available Attentional control refers to the regulatory processes that ensure that our actions are in accordance with our goals. Dual-system accounts view temperament as consisting of both individual variation in emotionality (e.g. trait anxiety and variation in regulatory attentional mechanisms that act to modulate emotionality. Increasing evidence links trait variation in attentional control to clinical mood and anxiety disorder symptoms, independent of trait emotionality. Attentional biases to threat have been robustly linked to mood and anxiety disorders. However, the role of variation in attentional control in influencing such biases, and the neural underpinnings of trait variation in attentional control, are unknown. Here, we show, that individual differences in trait attentional control, even when accounting for trait and state anxiety, are related to the magnitude of an attentional blink following threat-related targets. Moreover, we demonstrate that activity in dorsolateral prefrontal cortex, is observed specifically in relation to control of attention over threatening stimuli, in line with neural theories of attentional control, such as guided activation theory. These results have key implications for neurocognitive theories of attentional bias and emotional resilience.

Students multicultural awareness

Directory of Open Access Journals (Sweden)

F.I Soekarman

2016-12-01

Full Text Available Multicultural awareness is the foundation of communication and it involves the ability of standing back from ourselves and becoming aware of our cultural values, beliefs and perceptions. Multicultural awareness becomes central when we have to interact with people from other cultures. People see, interpret and evaluate things in a different ways. What is considered an appropriate behaviour in one culture is frequently inappropriate in another one. this research use descriptive- quantitative methodology to indentify level of students multicultural awareness specifically will be identified by gender and academic years. This research will identify multicultural awareness based on differences of gender, academic years. This research use random and purposive random sampling of 650 students from university. These studies identify of multicultural awareness 34, 11, 4% in high condition, 84, 1% medium and 4, 5% in low. Further, there is a significant difference in the level of multicultural awareness based on gender and academic year. These findings could not be generalized because of the limited sample and ethnicity; it should need a wider research so that can be generalized and recommended the efforts to development and improvement of multicultural awareness conditions for optimization the services.

Low cost submarine robot

Directory of Open Access Journals (Sweden)

Ponlachart Chotikarn

2010-10-01

Full Text Available A submarine robot is a semi-autonomous submarine robot used mainly for marine environmental research. We aim todevelop a low cost, semi-autonomous submarine robot which is able to travel underwater. The robot’s structure was designedand patented using a novel idea of the diving system employing a volume adjustment mechanism to vary the robot’s density.A light weight, flexibility and small structure provided by PVC can be used to construct the torpedo-liked shape robot.Hydraulic seal and O-ring rubbers are used to prevent water leaking. This robot is controlled by a wired communicationsystem.

Robust optimization of a tandem grating solar thermal absorber

Science.gov (United States)

Choi, Jongin; Kim, Mingeon; Kang, Kyeonghwan; Lee, Ikjin; Lee, Bong Jae

2018-04-01

Ideal solar thermal absorbers need to have a high value of the spectral absorptance in the broad solar spectrum to utilize the solar radiation effectively. Majority of recent studies about solar thermal absorbers focus on achieving nearly perfect absorption using nanostructures, whose characteristic dimension is smaller than the wavelength of sunlight. However, precise fabrication of such nanostructures is not easy in reality; that is, unavoidable errors always occur to some extent in the dimension of fabricated nanostructures, causing an undesirable deviation of the absorption performance between the designed structure and the actually fabricated one. In order to minimize the variation in the solar absorptance due to the fabrication error, the robust optimization can be performed during the design process. However, the optimization of solar thermal absorber considering all design variables often requires tremendous computational costs to find an optimum combination of design variables with the robustness as well as the high performance. To achieve this goal, we apply the robust optimization using the Kriging method and the genetic algorithm for designing a tandem grating solar absorber. By constructing a surrogate model through the Kriging method, computational cost can be substantially reduced because exact calculation of the performance for every combination of variables is not necessary. Using the surrogate model and the genetic algorithm, we successfully design an effective solar thermal absorber exhibiting a low-level of performance degradation due to the fabrication uncertainty of design variables.

Racial Differences in Awareness of the Affordable Care Act and Application Assistance Among Low-Income Adults in Three Southern States

Directory of Open Access Journals (Sweden)

Adrian Garcia Mosqueira MA

2015-10-01

Full Text Available The Affordable Care Act (ACA expanded Medicaid eligibility to adults with incomes under 138% of the federal poverty level, leading to substantial reductions in uninsured rates among low-income adults. Despite large gains in coverage, studies suggest that Latinos may be less likely than other racial/ethnic groups to apply and enroll in health insurance, and they remain the group with the highest uninsured rate in the United States. We explore two potential factors related to racial/ethnic differences in ACA enrollment—awareness of the law and receipt of application assistance such as navigator services. Using a survey of nearly 3000 low-income U.S. citizens (aged 19-64 in 3 states in late 2014, we find that Latinos had significantly lower levels of awareness of the ACA relative to other groups, even after adjusting for demographic covariates. Higher education was the strongest positive predictor of ACA awareness. In contrast, Latinos were much more likely to receive assistance from navigators or social workers when applying, relative to other racial/ethnic groups. Taken together, these results highlight the importance of ACA outreach efforts to increase awareness among low-income and less educated populations, two groups that are overrepresented in the Latino population, to close existing disparities in coverage.

Low-rank Quasi-Newton updates for Robust Jacobian lagging in Newton methods

International Nuclear Information System (INIS)

Brown, J.; Brune, P.

2013-01-01

Newton-Krylov methods are standard tools for solving nonlinear problems. A common approach is to 'lag' the Jacobian when assembly or preconditioner setup is computationally expensive, in exchange for some degradation in the convergence rate and robustness. We show that this degradation may be partially mitigated by using the lagged Jacobian as an initial operator in a quasi-Newton method, which applies unassembled low-rank updates to the Jacobian until the next full reassembly. We demonstrate the effectiveness of this technique on problems in glaciology and elasticity. (authors)

Cost-effectiveness analysis of sensor-augmented pump therapy with low glucose-suspend in patients with type 1 diabetes mellitus and high risk of hypoglycemia in Spain.

Science.gov (United States)

Conget, Ignacio; Martín-Vaquero, Pilar; Roze, Stéphane; Elías, Isabel; Pineda, Cristina; Álvarez, María; Delbaere, Alexis; Ampudia-Blasco, Francisco Javier

2018-05-19

To compare the cost-effectiveness of sensor-augmented pump therapy (SAP) [continuous subcutaneous insulin infusion (CSII) plus real-time continuous glucose monitoring (RT-CGM)] with low glucose suspend (MiniMed™ Veo™) and CSII alone in patients with type 1 diabetes mellitus (T1DM) at high risk of hypoglycemia in Spain. The IQVIA CORE Diabetes Model was used to estimate healthcare outcomes as life-years gained (LYGs) and quality-adjusted life years (QALYs), and to project lifetime costs. Information about efficacy, resource utilization, and unit costs (€2016) was taken from published sources and validated by an expert panel. Analyses were performed from both the Spanish National Health System (NHS) perspective and the societal perspective. From the NHS perspective, SAP with low glucose suspend was associated to a €47,665 increase in direct healthcare costs and to increases of 0.19 LYGs and 1.88 QALYs, both discounted, which resulted in an incremental cost-effectiveness ratio (ICER) of €25,394/QALY. From the societal perspective, SAP with low glucose suspend increased total costs (including direct and indirect healthcare costs) by €41,036, with a resultant ICER of €21,862/QALY. Considering the willingness-to-pay threshold of €30,000/QALY in Spain, SAP with low glucose suspend represents a cost-effective option from both the NHS and societal perspectives. Sensitivity analyses confirmed the robustness of the model. From both the Spanish NHS perspective and the societal perspective, SAP with low glucose suspend is a cost-effective option for the treatment of T1DM patients at high risk of hypoglycemia. Copyright © 2018 SEEN y SED. Publicado por Elsevier España, S.L.U. All rights reserved.

A Framework for Developing Context-aware Systems

Directory of Open Access Journals (Sweden)

Vangalur Alagar

2014-09-01

Full Text Available Context-aware computing refers to a general class of mobile real-time reactive systems that continuously sense their physical environment, and adapt their behavior accordingly. Context-awareness is an essential inherent property of ubiquitous computing or pervasive computing systems. Such systems are much richer and more complex than many software systems. The richness mainly comes from context-awareness, the heterogeneity of mobile devices and their service types, while complexity arises in the multitude of adaptations enforced by system policies. In order to provide the true intended effect on the application of services without compromising on the richness, the complexity must be tamed. Towards this goal, this paper proposes a component-based architecture for a Context-aware Framework in which context, awareness capabilities, reactions, and adaptations are formally dealt with. Two formal languages are designed to express context situations and express workflow policies, which respectively lead to a context reasoner and to enforce adaptations.With these formalisms and a component design that can be formalized, this work fulfills a formal approach to construct context-aware applications. Two case studies are explained, of which one is a proof-of-concept case study from service-oriented domain. It is fully implemented to illustrate the expressiveness of the framework design and robustness of its implementation.

Low Cost, High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI

Science.gov (United States)

2017-10-01

greater gas polarizations and production amounts/ throughputs- benefiting in particular from the advent of com- pact, high-power, relatively low- cost ...Award Number: W81XWH-15-1-0271 TITLE: Low- Cost , High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI...DISTRIBUTION STATEMENT: Approved for Public Release; Distribution Unlimited The views, opinions and/or findings contained in this report are those of the

Use of Vertically Integrated Ice in WRF-Based Forecasts of Lightning Threat

Science.gov (United States)

McCaul, E. W., jr.; Goodman, S. J.

2008-01-01

Previously reported methods of forecasting lightning threat using fields of graupel flux from WRF simulations are extended to include the simulated field of vertically integrated ice within storms. Although the ice integral shows less temporal variability than graupel flux, it provides more areal coverage, and can thus be used to create a lightning forecast that better matches the areal coverage of the lightning threat found in observations of flash extent density. A blended lightning forecast threat can be constructed that retains much of the desirable temporal sensitivity of the graupel flux method, while also incorporating the coverage benefits of the ice integral method. The graupel flux and ice integral fields contributing to the blended forecast are calibrated against observed lightning flash origin density data, based on Lightning Mapping Array observations from a series of case studies chosen to cover a wide range of flash rate conditions. Linear curve fits that pass through the origin are found to be statistically robust for the calibration procedures.

An empirical investigation into the changing visual identity of full service and low cost carriers, 2000 vs. 2012

Directory of Open Access Journals (Sweden)

Adam Taylor

2013-09-01

Full Text Available This paper reports on the findings of a semiotic content analysis of the visual branding of over 630 airline tail fins as they appeared in 2000 and 2012. Unlike existing studies of airlines’ visual identities that rely on a snap shot in time and examine all airlines, this paper focuses on changes that have occurred in the visual branding of full-service carriers (FSCs and low cost carriers (LCCs between 2000 and 2012. The results confirm that there have been significant changes in the visual content of FSC and LCC tail fins and the way in which these airlines portray non-price competitive characteristics. The research shows that while an increasing number of LCCs now use aircraft tail fins to display their corporate name, FSCs are increasingly employing icons of nationhood. This suggests that while LCCs are trying to appeal to a wide passenger demographic who value low fares over service, FSCs are responding to the competitive threat by explicitly drawing on the cultural rhetoric of symbols of sovereign national identity to differentiate themselves in an increasingly competitive market.

A Low-Cost, Real-Time Network for Radiological Monitoring Around Nuclear Facilities

International Nuclear Information System (INIS)

Bertoldo, N A

2004-01-01

A low-cost, real-time radiological sensor network for emergency response has been developed and deployed at the Lawrence Livermore National Laboratory (LLNL). The Real-Time Radiological Area Monitoring (RTRAM) network is comprised of 16 Geiger-Mueller (GM) sensors positioned on the site perimeter to continuously monitor radiological conditions as part of LLNL's comprehensive environment/safety/health protection program. The RTRAM network sensor locations coincide with wind sector directions to provide thorough coverage of the one square mile site. These low-power sensors transmit measurement data back to a central command center (CCC) computer through the LLNL telecommunications infrastructure. Alarm conditions are identified by comparing current data to predetermined threshold parameters and are validated by comparison with plausible dispersion modeling scenarios and prevailing meteorological conditions. Emergency response personnel are notified of alarm conditions by automatic radio- and computer- based notifications. A secure intranet provides emergency response personnel with current condition assessment data that enable them to direct field response efforts remotely. This system provides a low-cost real-time radiation monitoring solution that is easily converted to incorporate both a hard-wired interior perimeter with strategically positioned wireless secondary and tertiary concentric remote locations. These wireless stations would be configured with solar voltaic panels that provide current to recharge batteries and power the sensors and radio transceivers. These platforms would supply data transmission at a range of up to 95 km from a single transceiver location. As necessary, using radio transceivers in repeater mode can extend the transmission range. The RTRAM network as it is presently configured at LLNL has proven to be a reliable system since initial deployment in August 2001 and maintains stability during inclement weather conditions. With the proposed

Improved interoceptive awareness in chronic low back pain: a comparison of Back school versus Feldenkrais method.

Science.gov (United States)

Paolucci, Teresa; Zangrando, Federico; Iosa, Marco; De Angelis, Simona; Marzoli, Caterina; Piccinini, Giulia; Saraceni, Vincenzo Maria

2017-05-01

To determine the efficacy of the Feldenkrais method for relieving pain in patients with chronic low back pain (CLBP) and the improvement of interoceptive awareness. This study was designed as a single-blind randomized controlled trial. Fifty-three patients with a diagnosis of CLBP for at least 3 months were randomly allocated to the Feldenkrais (mean age 61.21 ± 11.53 years) or Back School group (mean age 60.70 ± 11.72 years). Pain was assessed using the visual analog scale (VAS) and McGill Pain Questionnaire (MPQ), disability was evaluated with the Waddel Disability Index, quality of life was measured with the Short Form-36 Health Survey (SF-36), and mind-body interactions were studied using the Multidimensional Assessment of Interoceptive Awareness Questionnaire (MAIA). Data were collected at baseline, at the end of treatment, and at the 3-month follow-up. The two groups were matched at baseline for all the computed parameters. At the end of treatment (Tend), there were no significant differences between groups regarding chronic pain reduction (p = 0.290); VAS and MAIA-N sub scores correlated at Tend (R = 0.296, p = 0.037). By the Friedman analysis, both groups experienced significant changes in pain (p Back School in CLBP. Implications for rehabilitation The Feldenkrais method is a mind-body therapy that is based on awareness through movement lessons, which are verbally guided explorations of movement that are conducted by a physiotherapist who is experienced and trained in this method. It aims to increase self-awareness, expand a person's repertoire of movements, and to promote increased functioning in contexts in which the entire body cooperates in the execution of movements. Interoceptive awareness, which improves with rehabilitation, has a complex function in the perception of chronic pain and should be investigated further in future research. The efficacy of the Feldenkrais method is comparable with that of BS for nonspecific chronic

Design and Analysis of Cost-Efficient Sensor Deployment for Tracking Small UAS with Agent-Based Modeling.

Science.gov (United States)

Shin, Sangmi; Park, Seongha; Kim, Yongho; Matson, Eric T

2016-04-22

Recently, commercial unmanned aerial systems (UAS) have gained popularity. However, these UAS are potential threats to people in terms of safety in public places, such as public parks or stadiums. To reduce such threats, we consider a design, modeling, and evaluation of a cost-efficient sensor system that detects and tracks small UAS. In this research, we focus on discovering the best sensor deployments by simulating different types and numbers of sensors in a designated area, which provide reasonable detection rates at low costs. Also, the system should cover the crowded areas more thoroughly than vacant areas to reduce direct threats to people underneath. This research study utilized the Agent-Based Modeling (ABM) technique to model a system consisting of independent and heterogeneous agents that interact with each other. Our previous work presented the ability to apply ABM to analyze the sensor configurations with two types of radars in terms of cost-efficiency. The results from the ABM simulation provide a list of candidate configurations and deployments that can be referred to for applications in the real world environment.

Design and Analysis of Cost-Efficient Sensor Deployment for Tracking Small UAS with Agent-Based Modeling

Directory of Open Access Journals (Sweden)

Sangmi Shin

2016-04-01

Full Text Available Recently, commercial unmanned aerial systems (UAS have gained popularity. However, these UAS are potential threats to people in terms of safety in public places, such as public parks or stadiums. To reduce such threats, we consider a design, modeling, and evaluation of a cost-efficient sensor system that detects and tracks small UAS. In this research, we focus on discovering the best sensor deployments by simulating different types and numbers of sensors in a designated area, which provide reasonable detection rates at low costs. Also, the system should cover the crowded areas more thoroughly than vacant areas to reduce direct threats to people underneath. This research study utilized the Agent-Based Modeling (ABM technique to model a system consisting of independent and heterogeneous agents that interact with each other. Our previous work presented the ability to apply ABM to analyze the sensor configurations with two types of radars in terms of cost-efficiency. The results from the ABM simulation provide a list of candidate configurations and deployments that can be referred to for applications in the real world environment.

Automated packaging platform for low-cost high-performance optical components manufacturing

Science.gov (United States)

Ku, Robert T.

2004-05-01

Delivering high performance integrated optical components at low cost is critical to the continuing recovery and growth of the optical communications industry. In today's market, network equipment vendors need to provide their customers with new solutions that reduce operating expenses and enable new revenue generating IP services. They must depend on the availability of highly integrated optical modules exhibiting high performance, small package size, low power consumption, and most importantly, low cost. The cost of typical optical system hardware is dominated by linecards that are in turn cost-dominated by transmitters and receivers or transceivers and transponders. Cost effective packaging of optical components in these small size modules is becoming the biggest challenge to be addressed. For many traditional component suppliers in our industry, the combination of small size, high performance, and low cost appears to be in conflict and not feasible with conventional product design concepts and labor intensive manual assembly and test. With the advent of photonic integration, there are a variety of materials, optics, substrates, active/passive devices, and mechanical/RF piece parts to manage in manufacturing to achieve high performance at low cost. The use of automation has been demonstrated to surpass manual operation in cost (even with very low labor cost) as well as product uniformity and quality. In this paper, we will discuss the value of using an automated packaging platform.for the assembly and test of high performance active components, such as 2.5Gb/s and 10 Gb/s sources and receivers. Low cost, high performance manufacturing can best be achieved by leveraging a flexible packaging platform to address a multitude of laser and detector devices, integration of electronics and handle various package bodies and fiber configurations. This paper describes the operation and results of working robotic assemblers in the manufacture of a Laser Optical Subassembly

The energy sector exposed to the cyber-threat

International Nuclear Information System (INIS)

Desarnaud, Gabrielle

2016-01-01

Technologies of information and communication (TICs) are present at all stages of energy production, transport and distribution, and this development is an opportunity for a better resources allocation, but also makes physical infrastructures more vulnerable to cyber-crime. The example of a cyber-attack against Ukrainian utilities in 2015 showed that this threat is an actual one, and the author outlines how energy companies are particularly vulnerable to these threats for cultural, historical and organisational reasons. Some simulations already assessed the huge costs of a cyber-attack against these infrastructures. The author then discusses the perspective and possibilities of development of a cyber-safety in Europe

Low Cost Vision Based Personal Mobile Mapping System

Science.gov (United States)

Amami, M. M.; Smith, M. J.; Kokkas, N.

2014-03-01

Mobile mapping systems (MMS) can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS). A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

Low Cost Vision Based Personal Mobile Mapping System

Directory of Open Access Journals (Sweden)

M. M. Amami

2014-03-01

Full Text Available Mobile mapping systems (MMS can be used for several purposes, such as transportation, highway infrastructure mapping and GIS data collecting. However, the acceptance of these systems is not wide spread and their use is still limited due the high cost and dependency on the Global Navigation Satellite System (GNSS. A low cost vision based personal MMS has been produced with an aim to overcome these limitations. The system has been designed to depend mainly on cameras and use of low cost GNSS and inertial sensors to provide a bundle adjustment solution with initial values. The system has the potential to be used indoor and outdoor. The system has been tested indoors and outdoors with different GPS coverage, surrounded features, and narrow and curvy paths. Tests show that the system is able to work in such environments providing 3D coordinates of better than 10 cm accuracy.

Low-Cost, High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI

Science.gov (United States)

2017-10-01

low- cost and high-throughput was a key element proposed for this project, which we believe will be of significant benefit to the patients suffering...Award Number: W81XWH-15-1-0272 TITLE: Low- Cost , High-Throughput 3-D Pulmonary Imager Using Hyperpolarized Contrast Agents and Low-Field MRI...STATEMENT: Approved for Public Release; Distribution Unlimited The views, opinions and/or findings contained in this report are those of the author(s

Understanding the Threat Ecosystem: A Concept for Intelligence Support to Special Warfare

Science.gov (United States)

2016-05-10

international law, national law, behavioral norms and ethical principles have no restraining effects on them.5 This emerging complexity paradigm is one...similar to a biome: a major ecological community of organisms adapted to a particular climatic or environmental condition on a large geographic area in...Awareness through tracking agents and agency in the threat environment is paramount to building an accurate ecological frame of the operational environment

Hollow Threats: Why Coercive Diplomacy Fails

Science.gov (United States)

2015-06-01

brand this as selection bias, the study of coercion has neglected the cumulative factor and is therefore worth bringing into the spotlight. As this...ended. Therefore, the Somali factions had both the luxury and foreknowledge to wait until the menace decreased and the costs increased (as...observation, was a trip wire. Since the luxury of hindsight demonstrates that Assad did use WMD and since that part of the deterrent threat was

Unhealthy interactions: the role of stereotype threat in health disparities.

Science.gov (United States)

Aronson, Joshua; Burgess, Diana; Phelan, Sean M; Juarez, Lindsay

2013-01-01

Stereotype threat is the unpleasant psychological experience of confronting negative stereotypes about race, ethnicity, gender, sexual orientation, or social status. Hundreds of published studies show how the experience of stereotype threat can impair intellectual functioning and interfere with test and school performance. Numerous published interventions derived from this research have improved the performance and motivation of individuals targeted by low-ability stereotypes. Stereotype threat theory and research provide a useful lens for understanding and reducing the negative health consequences of interracial interactions for African Americans and members of similarly stigmatized minority groups. Here we summarize the educational outcomes of stereotype threat and examine the implications of stereotype threat for health and health-related behaviors.

Designing a Low-Cost Multifunctional Infant Incubator.

Science.gov (United States)

Tran, Kevin; Gibson, Aaron; Wong, Don; Tilahun, Dagmawi; Selock, Nicholas; Good, Theresa; Ram, Geetha; Tolosa, Leah; Tolosa, Michael; Kostov, Yordan; Woo, Hyung Chul; Frizzell, Michael; Fulda, Victor; Gopinath, Ramya; Prasad, J Shashidhara; Sudarshan, Hanumappa; Venkatesan, Arunkumar; Kumar, V Sashi; Shylaja, N; Rao, Govind

2014-06-01

Every year, an unacceptably large number of infant deaths occur in developing nations, with premature birth and asphyxia being two of the leading causes. A well-regulated thermal environment is critical for neonatal survival. Advanced incubators currently exist, but they are far too expensive to meet the needs of developing nations. We are developing a thermodynamically advanced low-cost incubator suitable for operation in a low-resource environment. Our design features three innovations: (1) a disposable baby chamber to reduce infant mortality due to nosocomial infections, (2) a passive cooling mechanism using low-cost heat pipes and evaporative cooling from locally found clay pots, and (3) insulated panels and a thermal bank consisting of water that effectively preserve and store heat. We developed a prototype incubator and visited and presented our design to our partnership hospital site in Mysore, India. After obtaining feedback, we have determined realistic, nontrivial design requirements and constraints in order to develop a new prototype incubator for clinical trials in hospitals in India. © 2014 Society for Laboratory Automation and Screening.

A combined emitter threat assessment method based on ICW-RCM

Science.gov (United States)

Zhang, Ying; Wang, Hongwei; Guo, Xiaotao; Wang, Yubing

2017-08-01

Considering that the tradition al emitter threat assessment methods are difficult to intuitively reflect the degree of target threaten and the deficiency of real-time and complexity, on the basis of radar chart method(RCM), an algorithm of emitter combined threat assessment based on ICW-RCM (improved combination weighting method, ICW) is proposed. The coarse sorting is integrated with fine sorting in emitter combined threat assessment, sequencing the emitter threat level roughly accordance to radar operation mode, and reducing task priority of the low-threat emitter; On the basis of ICW-RCM, sequencing the same radar operation mode emitter roughly, finally, obtain the results of emitter threat assessment through coarse and fine sorting. Simulation analyses show the correctness and effectiveness of this algorithm. Comparing with classical method of emitter threat assessment based on CW-RCM, the algorithm is visual in image and can work quickly with lower complexity.

Stereotype Threat.

Science.gov (United States)

Spencer, Steven J; Logel, Christine; Davies, Paul G

2016-01-01

When members of a stigmatized group find themselves in a situation where negative stereotypes provide a possible framework for interpreting their behavior, the risk of being judged in light of those stereotypes can elicit a disruptive state that undermines performance and aspirations in that domain. This situational predicament, termed stereotype threat, continues to be an intensely debated and researched topic in educational, social, and organizational psychology. In this review, we explore the various sources of stereotype threat, the mechanisms underlying stereotype-threat effects (both mediators and moderators), and the consequences of this situational predicament, as well as the means through which society and stigmatized individuals can overcome the insidious effects of stereotype threat. Ultimately, we hope this review alleviates some of the confusion surrounding stereotype threat while also sparking further research and debate.

Analysis on Occupants’ Satisfaction for Safety Performance Assessment in Low Cost Housing

Directory of Open Access Journals (Sweden)

Husin Husrul Nizam

2014-01-01

Full Text Available The delivery performance of the low cost housing is questioned since the occupants are prone towards safety hazards in the housing complex, such as structural instability and falling building fragments. Without defining the occupants’ requirements for the development of low cost housing, the prevailing safety factors are hard to be determined. This paper explores the rationale of safety performance assessment in the low cost housing by considering the occupants’ participation to achieve a better safety provision during occupancy period. Questionnaire survey was distributed to 380 occupants of the low cost housing in Kuala Lumpur and Selangor, Malaysia. The result shows that 80.8% of the respondents had expressed their dissatisfaction with the safety performance of the lift. By referring to the mode of ranking level, the most significant aspect rated by the respondents is Building Safety Features, with 51.6% respondents. The attained aspects can be fundamental parameters which can be considered in the future development of low cost housing.

Waste Management Facilities cost information for low-level waste

Energy Technology Data Exchange (ETDEWEB)

Shropshire, D.; Sherick, M.; Biadgi, C.

1995-06-01

This report contains preconceptual designs and planning level life-cycle cost estimates for managing low-level waste. The report`s information on treatment, storage, and disposal modules can be integrated to develop total life-cycle costs for various waste management options. A procedure to guide the US Department of Energy and its contractor personnel in the use of cost estimation data is also summarized in this report.

Quantity Surveying Undergraduates’ Awareness on Cost Significant of High-Rise Condominium Projects in Malaysia: The Case of a Private University in Malaysia

Directory of Open Access Journals (Sweden)

Peng Lee Wah

2016-01-01

Full Text Available Recent developments in quantity surveying (QS emphasised the importance of identifying cost significant elements (CSE. The knowledge on CSE of high-rise condominium projects (HRCP is essential as high-rise residential multi-unit projects are the next option in building construction due to limited land areas in urban areas. This study aims to determine the levels of awareness among QS undergraduates of a private university in Malaysia on CSE of HRCP in Malaysia. The respondents’ knowledge on CSE has not achieved a satisfactory level. Both male and female respondents have the same levels of awareness on CSE. Remedial strategies to improve this situation are recommended.

AUTOMATED LOW-COST PHOTOGRAMMETRY FOR FLEXIBLE STRUCTURE MONITORING

Directory of Open Access Journals (Sweden)

C. H. Wang

2012-07-01

Full Text Available Structural monitoring requires instruments which can provide high precision and accuracy, reliable measurements at good temporal resolution and rapid processing speeds. Long-term campaigns and flexible structures are regarded as two of the most challenging subjects in monitoring engineering structures. Long-term monitoring in civil engineering is generally considered to be labourintensive and financially expensive and it can take significant effort to arrange the necessary human resources, transportation and equipment maintenance. When dealing with flexible structure monitoring, it is of paramount importance that any monitoring equipment used is able to carry out rapid sampling. Low cost, automated, photogrammetric techniques therefore have the potential to become routinely viable for monitoring non-rigid structures. This research aims to provide a photogrammetric solution for long-term flexible structural monitoring purposes. The automated approach was achieved using low-cost imaging devices (mobile phones to replace traditional image acquisition stations and substantially reduce the equipment costs. A self-programmed software package was developed to deal with the hardware-software integration and system operation. In order to evaluate the performance of this low-cost monitoring system, a shaking table experiment was undertaken. Different network configurations and target sizes were used to determine the best configuration. A large quantity of image data was captured by four DSLR cameras and four mobile phone cameras respectively. These image data were processed using photogrammetric techniques to calculate the final results for the system evaluation.

Awareness of deficits in traumatic brain injury: a multidimensional approach to assessing metacognitive knowledge and online-awareness.

LENUS (Irish Health Repository)

O'Keeffe, Fiadhnait

2007-01-01

Recent models of impaired awareness in brain injury draw a distinction between metacognitive knowledge of difficulties and online awareness of errors (emergent and anticipatory). We examined performance of 31 Traumatic Brain Injury (TBI) participants and 31 healthy controls using a three-strand approach to assessing awareness. Metacognitive knowledge was assessed with an awareness interview and discrepancy scores on three questionnaires--Patient Competency Rating Scale, Frontal Systems Behavioral Scale and the Cognitive Failures Questionnaire. Online Emergent Awareness was assessed using an online error-monitoring task while participants performed tasks of sustained attention. Online anticipatory awareness was examined using prediction performance on two cognitive tasks. Results indicated that the TBI Low Self-Awareness (SA) group and High SA group did not differ in terms of severity, chronicity or standard neuropsychological tasks but those with Low SA were more likely to exhibit disinhibition, interpersonal problems and more difficulties in total competency. Sustained attention abilities were associated with both types of online awareness (emergent and anticipatory). There was a strong relationship between online emergent and online anticipatory awareness. Metacognitive knowledge did not correlate with the other two measures. This study highlights the necessity in adopting a multidimensional approach to assessing the multifaceted phenomenon of awareness of deficits.

Low cost balancing unit design

Science.gov (United States)

Golembiovsky, Matej; Dedek, Jan; Slanina, Zdenek

2017-06-01

This article deals with the design of a low-cost balancing system which consist of battery balancing units, accumulator pack units and coordinator unit with interface for higher level of battery management system. This solution allows decentralized mode of operation and the aim of this work is implementation of controlling and diagnostic mechanism into an electric scooter project realized at Technical university of Ostrava. In todays world which now fully enjoys the prime of electromobility, off-grid battery systems and other, it is important to seek the optimal balance between functionality and the economy side of BMS that being electronics which deals with secondary cells of batery packs. There were numerous sophisticated, but not too practical BMS models in the past, such as centralized system or standalone balance modules of individual cells. This article aims at development of standalone balance modules which are able to communicate with the coordinator, adjust their parameters and ensure their cells safety in case of a communication failure. With the current worldwide cutting cost trend in mind, the emphasis was put on the lowest price possible for individual component. The article is divided into two major categories, the first one being desing of power electronics with emphasis on quality, safety (cooling) and also cost. The second part describes development of a communication interface with reliability and cost in mind. The article contains numerous graphs from practical measurements. The outcome of the work and its possible future is defined in the conclusion.

Current trends in treatment of obesity in Karachi and possibilities of cost minimization.

Science.gov (United States)

Hussain, Mirza Izhar; Naqvi, Baqir Shyum

2015-03-01

Our study finds out drug usage trends in over weight and obese patients without any compelling indications in Karachi, looks for deviations of current practices from evidence based antihypertensive therapeutic guidelines and identifies not only cost minimization opportunities but also communication strategies to improve patients' awareness and compliance to achieve therapeutic goal. In present study two sets were used. Randomized stratified independent surveys were conducted in hospital doctors and family physicians (general practitioners), using pretested questionnaires. Sample size was 100. Statistical analysis was conducted on Statistical Package for Social Science (SPSS). Opportunities of cost minimization were also analyzed. One the basis of doctors' feedback, preference is given to non-pharmacologic management of obesity. Mass media campaign and media usage were recommended to increase patients awareness and patients' education along with strengthening family support systems was recommended for better compliance of the patients to doctor's advice. Local therapeutic guidelines for weight reduction were not found. Feedbacks showed that global therapeutic guidelines were followed by the doctors practicing in the community and hospitals in Karachi. However, high price branded drugs were used instead of low priced generic therapeutic equivalents. Patient's education is required for better awareness and improving patients' compliance. The doctors found preferring brand leaders instead of low cost options. This trend increases cost of therapy by 0.59 to 4.17 times. Therefore, there are great opportunities for cost minimization by using evidence-based clinically effective and safe medicines.

Construction of a low-cost luximeter

Science.gov (United States)

Pedroso, L. S.; de Macedo, J. A.; de Araújo, M. S. T.; Voelzke, M. R.

2016-04-01

This paper proposes the construction of an electronic instrument called digital luximeter, combining simplicity and low cost, making it simpler and cheaper than those on the market. Its construction tends to facilitate dissemination and access to this type of measuring instrument between high school teachers and educational institutions, making it ideal to be a science lab.

Security Requirements for New Threats at International Airports

Directory of Open Access Journals (Sweden)

Gabriel Nowacki

2018-03-01

Full Text Available The paper refers to security requirements for new threats international airports, taking specifically into consideration current challenges within processing of passengers, in light of types of current major threats, in a way ensuring positive passenger experience within their journey. In addition, within the scope of this paper, presented initial outcome of study research among professional aviation stakeholder?s environment, on current threats in the area of security and protection of airport infrastructure. The airports are a very demanding environment: seasonal traffic, fluctuating passenger volumes and last minute changes mean there is a lot of flexibility required in order to meet specific needs of airport authorities and their clients or the passengers (Dolnik, 2009. Therefore, security in aviation sector has been a big issue for civil aviation authorities, as airports are susceptible targets for terrorist attacks. The list of incidents is extensive and gets longer every year despite strict security measures. Within decades, aviation has become the backbone of our global economy bringing people to business, tourists to vacation destinations and products to markets. Statistically flying remains the safest mode of travelling compared to other modes of transportation. However, simultaneously terrorists and criminals continue in their quest to explore new ways of disrupting air transportation and the challenge to secure airports and airline assets remain real. This calls for greater awareness of security concerns in the aviation sector. The key element, how to protects against terrorist modus operandi, is to stay ahead of recent threats, incidents and breaches occurring worldwide. It requires implementation of effective data sharing systems, in order to proactively monitor potential risks and vulnerabilities within different type of aviation ecosystems.

Cost-effectiveness evaluation of an RCT in rehabilitation after lumbar spinal fusion: a low-cost, behavioural approach is cost-effective over individual exercise therapy

DEFF Research Database (Denmark)

Søgaard, Rikke; Laurberg, Ida; Christensen, Finn B

2008-01-01

Recently, Christensen et al. reported the clinical effects of a low-cost rehabilitation program equally efficient to a relatively intensive program of individual, physiotherapist-guided exercise therapy. Yet, the low-cost approach is not fully supported as an optimal strategy until a full......-scale economic evaluation, including extra-hospital effects such as service utilization in the primary health care sector and return-to-work, is conducted. The objective of this study was to conduct such evaluation i.e. investigate the cost-effectiveness of (1) a low-cost rehabilitation regimen...... with a behavioural element and (2) a regimen of individual exercise therapy, both in comparison with usual practice, from a health economic, societal perspective. Study design was a cost-effectiveness evaluation of an RCT with a 2-year follow-up. Ninety patients having had posterolateral or circumferential fusion...

Technical considerations for designing low-cost, long-wave infrared objectives

Science.gov (United States)

Desroches, Gerard; Dalzell, Kristy; Robitaille, Blaise

2014-06-01

With the growth of uncooled infrared imaging in the consumer market, the balance between cost implications and performance criteria in the objective lens must be examined carefully. The increased availability of consumer-grade, long-wave infrared cameras is related to a decrease in military usage but it is also due to the decreasing costs of the cameras themselves. This has also driven up demand for low-cost, long-wave objectives that can resolve smaller pixels while maintaining high performance. Smaller pixels are traditionally associated with high cost objectives because of higher resolution requirements but, with careful consideration of all the requirements and proper selection of materials, costs can be moderated. This paper examines the cost/performance trade-off implications associated with optical and mechanical requirements of long-wave infrared objectives. Optical performance, f-number, field of view, distortion, focus range and thermal range all affect the cost of the objective. Because raw lens material cost is often the most expensive item in the construction, selection of the material as well as the shape of the lens while maintaining acceptable performance and cost targets were explored. As a result of these considerations, a low-cost, lightweight, well-performing objective was successfully designed, manufactured and tested.

A low-cost AFM setup with an interferometer for undergraduates and secondary-school students

International Nuclear Information System (INIS)

Bergmann, Antje; Feigl, Daniela; Kuhn, David; Schaupp, Manuel; Quast, Günter; Busch, Kurt; Eichner, Ludwig; Schumacher, Jens

2013-01-01

Atomic force microscopy (AFM) is an important tool in nanotechnology. This method makes it possible to observe nanoscopic surfaces beyond the resolution of light microscopy. In order to provide undergraduate and secondary-school students with insights into this world, we have developed a very robust low-cost AFM setup with a Fabry–Perot interferometer as a detecting device. This setup is designed to be operated almost completely manually and its simplicity gives access to a profound understanding of the working principle. Our AFM is operated in a constant height mode, i.e. the topography of the sample surface is represented directly by the deflection of the cantilever. Thus, the measuring procedure can be understood even by secondary-school students; furthermore, it is the method with the lowest cost, totalling not more than 10–15 k Euros. Nevertheless, we are able to examine a large variety of sample topographies such as CD and DVD surfaces, IC structures, blood cells, butterfly wings or moth eyes. Furthermore, force–distance curves can be recorded and the tensile moduli of some materials can be evaluated. We present our setup in detail and describe its working principles. In addition, we show various experiments which have already been performed by students. (paper)

Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

Science.gov (United States)

Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

2017-09-01

The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

Design of a low-cost hybrid powertrain with large fuel savings

NARCIS (Netherlands)

Berkel, van K.; Romers, L.H.J.; Vroemen, B.G.; Hofman, T.; Steinbuch, M.

2010-01-01

This paper presents a new design of a low-cost hybrid powertrain with large fuel savings. The hybrid powertrain contains only low-cost mechanical components, such as a flywheel module and a continuously variable transmission (CVT). Noelectrical motor/generator or battery is used. Based on

Providing strong Security and high privacy in low-cost RFID networks

DEFF Research Database (Denmark)

David, Mathieu; Prasad, Neeli R.

2009-01-01

Since the dissemination of Radio Frequency IDentification (RFID) tags is getting larger and larger, the requirement for strong security and privacy is also increasing. Low-cost and ultra-low-cost tags are being implemented on everyday products, and their limited resources constraints the security...

Low-cost production of solar-cell panels

Science.gov (United States)

Bickler, D. B.; Gallagher, B. D.; Sanchez, L. E.

1980-01-01

Large-scale production model combines most modern manufacturing techniques to produce silicon-solar-cell panels of low costs by 1982. Model proposes facility capable of operating around the clock with annual production capacity of 20 W of solar cell panels.

Identifying and quantifying energy savings on fired plant using low cost modelling techniques

International Nuclear Information System (INIS)

Tucker, Robert; Ward, John

2012-01-01

Research highlights: → Furnace models based on the zone method for radiation calculation are described. → Validated steady-state and transient models have been developed. → We show how these simple models can identify the best options for saving energy. → High emissivity coatings predicted to give performance enhancement on a fired heater. → Optimal heat recovery strategies on a steel reheating furnace are predicted. -- Abstract: Combustion in fired heaters, boilers and furnaces often accounts for the major energy consumption on industrial processes. Small improvements in efficiency can result in large reductions in energy consumption, CO 2 emissions, and operating costs. This paper will describe some useful low cost modelling techniques based on the zone method to help identify energy saving opportunities on high temperature fuel-fired process plant. The zone method has for many decades, been successfully applied to small batch furnaces through to large steel-reheating furnaces, glass tanks, boilers and fired heaters on petrochemical plant. Zone models can simulate both steady-state furnace operation and more complex transient operation typical of a production environment. These models can be used to predict thermal efficiency and performance, and more importantly, to assist in identifying and predicting energy saving opportunities from such measures as: ·Improving air/fuel ratio and temperature controls. ·Improved insulation. ·Use of oxygen or oxygen enrichment. ·Air preheating via flue gas heat recovery. ·Modification to furnace geometry and hearth loading. There is also increasing interest in the application of refractory coatings for increasing surface radiation in fired plant. All of the techniques can yield savings ranging from a few percent upwards and can deliver rapid financial payback, but their evaluation often requires robust and reliable models in order to increase confidence in making financial investment decisions. This paper gives

Cost-effective and low-technology options for simulation and training in neonatology.

Science.gov (United States)

Bruno, Christie J; Glass, Kristen M

2016-11-01

The purpose of this review is to explore low-cost options for simulation and training in neonatology. Numerous cost-effective options exist for simulation and training in neonatology. Lower cost options are available for teaching clinical skills and procedural training in neonatal intubation, chest tube insertion, and pericardiocentesis, among others. Cost-effective, low-cost options for simulation-based education can be developed and shared in order to optimize the neonatal simulation training experience. Copyright © 2016 Elsevier Inc. All rights reserved.

Awareness and willingness to use HIV pre-exposure prophylaxis among men who have sex with men in low- and middle-income countries: a systematic review and meta-analysis

Science.gov (United States)

Yi, Siyan; Tuot, Sovannary; Mwai, Grace W; Ngin, Chanrith; Chhim, Kolab; Pal, Khoundyla; Igbinedion, Ewemade; Holland, Paula; Choub, Sok Chamreun; Mburu, Gitau

2017-01-01

structural domain, concerns regarding attitudes of healthcare providers, quality assurance, data protection, and cost were determinants of potential use. Conclusions: This review found that despite low levels of awareness of PrEP, MSM in LMIC are willing to use it if they are supported appropriately to deal with a range of individual, social, and structural barriers. PMID:28691439

A Dual-Linear Kalman Filter for Real-Time Orientation Determination System Using Low-Cost MEMS Sensors.

Science.gov (United States)

Zhang, Shengzhi; Yu, Shuai; Liu, Chaojun; Yuan, Xuebing; Liu, Sheng

2016-02-20

To provide a long-time reliable orientation, sensor fusion technologies are widely used to integrate available inertial sensors for the low-cost orientation estimation. In this paper, a novel dual-linear Kalman filter was designed for a multi-sensor system integrating MEMS gyros, an accelerometer, and a magnetometer. The proposed filter precludes the impacts of magnetic disturbances on the pitch and roll which the heading is subjected to. The filter can achieve robust orientation estimation for different statistical models of the sensors. The root mean square errors (RMSE) of the estimated attitude angles are reduced by 30.6% under magnetic disturbances. Owing to the reduction of system complexity achieved by smaller matrix operations, the mean total time consumption is reduced by 23.8%. Meanwhile, the separated filter offers greater flexibility for the system configuration, as it is possible to switch on or off the second stage filter to include or exclude the magnetometer compensation for the heading. Online experiments were performed on the homemade miniature orientation determination system (MODS) with the turntable. The average RMSE of estimated orientation are less than 0.4° and 1° during the static and low-dynamic tests, respectively. More realistic tests on two-wheel self-balancing vehicle driving and indoor pedestrian walking were carried out to evaluate the performance of the designed MODS when high accelerations and angular rates were introduced. Test results demonstrate that the MODS is applicable for the orientation estimation under various dynamic conditions. This paper provides a feasible alternative for low-cost orientation determination.

Training on NORM: Increasing awareness, reducing occupational dose

International Nuclear Information System (INIS)

Hoogstraate, H.; Sonsbeek, R. van

2002-01-01

Awareness of a risk is the starting point of protection against it. The best way of creating this awareness is by providing training to the persons that run the risk. This also applies to the risks associated with the presence of Naturally Occurring Radioactive Materials (NORM) in oil and gas production installations. Our experience shows that with relatively little effort, and low cost it is possible to provide training on NORM to operational personnel of oil and gas companies. In this way, a reduction of occupational dose and an increased protection of the environment can be achieved. This applies in particular to the less developed countries, where little regulation is in place. The workers themselves form a group that is motivated and eager to learn about these risks.Training of personnel is a valuable tool to make people more conscious of the risks involved with radiation and to safeguard society, instead of a system of permissions and governmental regulations that often is not functioning properly. (author)

Prefrontal inhibition of threat processing protects working memory from interference.

Directory of Open Access Journals (Sweden)

Robert James Clarke

2013-05-01

Full Text Available Bottom-up processes can interrupt ongoing cognitive processing in order to adaptively respond to emotional stimuli of high potential significance, such as those that threaten wellbeing. However it is vital that this interference can be modulated in certain contexts to focus on current tasks. Deficits in the ability to maintain the appropriate balance between cognitive and emotional demands can severely impact on day-to-day activities. This fMRI study examined this interaction between threat processing and cognition; 18 adult participants performed a visuospatial working memory (WM task with two load conditions, in the presence and absence of anxiety induction by threat of electric shock. Threat of shock interfered with performance in the low cognitive load condition; however interference was eradicated under high load, consistent with engagement of emotion regulation mechanisms. Under low load the amygdala showed significant activation to threat of shock that was modulated by high cognitive load. A directed top-down control contrast identified two regions associated with top-down control; ventrolateral PFC and dorsal ACC. Dynamic causal modelling provided further evidence that under high cognitive load, top-down inhibition is exerted on the amygdala and its outputs to prefrontal regions. Additionally, we hypothesised that individual differences in a separate, non-emotional top-down control task would predict the recruitment of dorsal ACC and ventrolateral PFC during top-down control of threat. Consistent with this, performance on a separate dichotic listening task predicted dorsal ACC and ventrolateral PFC activation during high WM load under threat of shock, though activation in these regions did not directly correlate with WM performance. Together, the findings suggest that under high cognitive load and threat, top-down control is exerted by dACC and vlPFC to inhibit threat processing, thus enabling WM performance without threat

Hunted woolly monkeys (Lagothrix poeppigii show threat-sensitive responses to human presence.

Directory of Open Access Journals (Sweden)

Sarah Papworth

Full Text Available Responding only to individuals of a predator species which display threatening behaviour allows prey species to minimise energy expenditure and other costs of predator avoidance, such as disruption of feeding. The threat sensitivity hypothesis predicts such behaviour in prey species. If hunted animals are unable to distinguish dangerous humans from non-dangerous humans, human hunting is likely to have a greater effect on prey populations as all human encounters should lead to predator avoidance, increasing stress and creating opportunity costs for exploited populations. We test the threat sensitivity hypothesis in wild Poeppigi's woolly monkeys (Lagothrix poeppigii in Yasuní National Park, Ecuador, by presenting human models engaging in one of three behaviours "hunting", "gathering" or "researching". These experiments were conducted at two sites with differing hunting pressures. Visibility, movement and vocalisations were recorded and results from two sites showed that groups changed their behaviours after being exposed to humans, and did so in different ways depending on the behaviour of the human model. Results at the site with higher hunting pressure were consistent with predictions based on the threat sensitivity hypothesis. Although results at the site with lower hunting pressure were not consistent with the results at the site with higher hunting pressure, groups at this site also showed differential responses to different human behaviours. These results provide evidence of threat-sensitive predator avoidance in hunted primates, which may allow them to conserve both time and energy when encountering humans which pose no threat.