WorldWideScience

Sample records for long-acting risperidone microspheres

  1. Preparation of a reproducible long-acting formulation of risperidone-loaded PLGA microspheres using microfluidic method.

    Science.gov (United States)

    Jafarifar, Elham; Hajialyani, Marziyeh; Akbari, Mona; Rahimi, Masoud; Shokoohinia, Yalda; Fattahi, Ali

    2017-09-01

    The aim of the present study is to prepare risperidone-loaded poly lactic-co-glycolic acid (PLGA) microspheres within microfluidic system and to achieve a formulation with uniform size and monotonic and reproducible release profile. In comparison to batch method, T-junction and serpentine chips were utilized and optimizing study was carried out at different processing parameters (e.g. PLGA and surfactant concentration and flow rates ratio of outer to inner phase). The computational fluid dynamic (CFD) modeling was performed, and loading and release study were carried out. CFD simulation indicates that increasing the flow rate of aqueous phase cause to decrease the droplet size, while the change in size of microspheres did not follow a specific pattern in the experimental results. The most uniform microspheres and narrowest standard deviation (66.79 μm ± 3.32) were achieved using T-junction chip, 1% polyvinylalcohol, 1% PLGA and flow rates ratio of 20. The microfluidic-assisted microspheres were more uniform with narrower size distribution. The release of risperidone from microspheres produced by the microfluidic method was more reproducible and closer to zero-order kinetic model. The release profile of formulation with 2:1 drug-to-polymer ratio was the most favorable release, in which 41.85% release could be achieved during 24 days.

  2. A reproducible accelerated in vitro release testing method for PLGA microspheres.

    Science.gov (United States)

    Shen, Jie; Lee, Kyulim; Choi, Stephanie; Qu, Wen; Wang, Yan; Burgess, Diane J

    2016-02-10

    The objective of the present study was to develop a discriminatory and reproducible accelerated in vitro release method for long-acting PLGA microspheres with inner structure/porosity differences. Risperidone was chosen as a model drug. Qualitatively and quantitatively equivalent PLGA microspheres with different inner structure/porosity were obtained using different manufacturing processes. Physicochemical properties as well as degradation profiles of the prepared microspheres were investigated. Furthermore, in vitro release testing of the prepared risperidone microspheres was performed using the most common in vitro release methods (i.e., sample-and-separate and flow through) for this type of product. The obtained compositionally equivalent risperidone microspheres had similar drug loading but different inner structure/porosity. When microsphere particle size appeared similar, porous risperidone microspheres showed faster microsphere degradation and drug release compared with less porous microspheres. Both in vitro release methods investigated were able to differentiate risperidone microsphere formulations with differences in porosity under real-time (37 °C) and accelerated (45 °C) testing conditions. Notably, only the accelerated USP apparatus 4 method showed good reproducibility for highly porous risperidone microspheres. These results indicated that the accelerated USP apparatus 4 method is an appropriate fast quality control tool for long-acting PLGA microspheres (even with porous structures). Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Development of Risperidone PLGA Microspheres

    Directory of Open Access Journals (Sweden)

    Susan D’Souza

    2014-01-01

    Full Text Available The aim of this study was to design and evaluate biodegradable PLGA microspheres for sustained delivery of Risperidone, with an eventual goal of avoiding combination therapy for the treatment of schizophrenia. Two PLGA copolymers (50 : 50 and 75 : 25 were used to prepare four microsphere formulations of Risperidone. The microspheres were characterized by several in vitro techniques. In vivo studies in male Sprague-Dawley rats at 20 and 40 mg/kg doses revealed that all formulations exhibited an initial burst followed by sustained release of the active moiety. Additionally, formulations prepared with 50 : 50 PLGA had a shorter duration of action and lower cumulative AUC levels than the 75 : 25 PLGA microspheres. A simulation of multiple dosing at weekly or 15-day regimen revealed pulsatile behavior for all formulations with steady state being achieved by the second dose. Overall, the clinical use of Formulations A, B, C, or D will eliminate the need for combination oral therapy and reduce time to achieve steady state, with a smaller washout period upon cessation of therapy. Results of this study prove the suitability of using PLGA copolymers of varying composition and molecular weight to develop sustained release formulations that can tailor in vivo behavior and enhance pharmacological effectiveness of the drug.

  4. Cost effectiveness of long-acting risperidone injection versus alternative antipsychotic agents in patients with schizophrenia in the USA.

    Science.gov (United States)

    Edwards, Natalie C; Locklear, Julie C; Rupnow, Marcia F T; Diamond, Ronald J

    2005-01-01

    The availability of long-acting risperidone injection may increase adherence and lead to improved clinical and economic outcomes for individuals with schizophrenia. The objective of this study was to assess the cost effectiveness of long-acting risperidone, oral risperidone, olanzapine, quetiapine, ziprasidone, aripiprazole, and haloperidol depot in patients with schizophrenia over 1 year from a healthcare system perspective. Published medical literature, unpublished data from clinical trials and a consumer health database, and a clinical expert panel were utilized to populate a decision analytical model comparing the seven treatment alternatives. The model captured rates of patient compliance, the rates, frequency and duration of relapse, incidence of adverse events, and healthcare resource utilization and associated costs. Primary outcomes were expressed in terms of percentage of patients relapsing per year, number of relapse days per year (number and duration of relapses per patient per year), and total direct 2003 medical cost per patient per year. On the basis of model projections, the proportions of patients experiencing a relapse requiring hospitalization in 1 year were 66% for haloperidol depot, 41% for oral risperidone, olanzapine, quetiapine, ziprasidone, and aripiprazole, and 26% for long-acting risperidone, whereas the proportions of patients with an exacerbation not requiring hospitalization were 60% for haloperidol depot, 37% for oral risperidone, olanzapine, quetiapine, ziprasidone, and aripiprazole, and 24% for long-acting risperidone. The mean number of days of relapse requiring hospitalization per patient per year were 28 for haloperidol depot, 18 for oral risperidone, olanzapine, quetiapine, ziprasidone, and aripiprazole, and 11 for long-acting risperidone, whereas the mean number of days of exacerbation not requiring hospitalization were eight for haloperidol depot, five for oral risperidone, olanzapine, quetiapine, ziprasidone, and aripiprazole

  5. Treatment-completion rates with olanzapine long-acting injection versus risperidone long-acting injection in a 12-month, open-label treatment of schizophrenia: indirect, exploratory comparisons

    Directory of Open Access Journals (Sweden)

    Ascher-Svanum H

    2012-05-01

    Full Text Available Haya Ascher-Svanum1, William S Montgomery2, David P McDonnell3, Kristina A Coleman4, Peter D Feldman11Lilly Research Laboratories, Eli Lilly and Company, Indianapolis, IN, USA; 2Eli Lilly Australia Pty Ltd, West Ryde, New South Wales, Australia; 3Eli Lilly and Company, Cork, Ireland; 4OptumInsight, Lilyfield, New South Wales, AustraliaBackground: Little is known about the comparative effectiveness of atypical antipsychotics in long-acting injection formulation. Due to the absence of head-to-head studies comparing olanzapine long-acting injection and risperidone long-acting injection, this study was intended to make exploratory, indirect, cross-study comparisons between the long-acting formulations of these two atypical antipsychotics in their effectiveness in treating patients with schizophrenia.Methods: Indirect, cross-study comparisons between olanzapine long-acting injection and risperidone long-acting injection used 12-month treatment-completion rates, because discontinuation of an antipsychotic for any cause is a recognized proxy measure of the medication's effectiveness in treating schizophrenia. Following a systematic review of the literature, two indirect comparisons were conducted using open-label, single-cohort studies in which subjects were stabilized on an antipsychotic medication before depot initiation. The first analysis compared olanzapine long-acting injection (one study with pooled data from nine identified risperidone long-acting injection studies. The second analysis was a “sensitivity analysis,” using only the most similar studies, one for olanzapine long-acting injection and one for risperidone long-acting injection, which shared near-identical study designs and involved study cohorts with near-identical patient characteristics. Pearson Chi-square tests assessed group differences on treatment-completion rates.Results: Comparison of olanzapine long-acting injection data (931 patients with the pooled data from the nine

  6. Cost-effectiveness model of long-acting risperidone in schizophrenia in the US.

    Science.gov (United States)

    Edwards, Natalie C; Rupnow, Marcia F T; Pashos, Chris L; Botteman, Marc F; Diamond, Ronald J

    2005-01-01

    Schizophrenia is a devastating and costly illness that affects 1% of the population in the US. Effective pharmacological therapies are available but suboptimal patient adherence to either acute or long-term therapeutic regimens reduces their effectiveness. The availability of a long-acting injection (LAI) formulation of risperidone may increase adherence and improve clinical and economic outcomes for people with schizophrenia. To assess the cost effectiveness of risperidone LAI compared with oral risperidone, oral olanzapine and haloperidol decanoate LAI over a 1-year time period in outpatients with schizophrenia who had previously suffered a relapse requiring hospitalisation. US healthcare system. Published medical literature, unpublished data from clinical trials and a consumer health database, and a clinical expert panel were used to populate a decision-analysis model comparing the four treatment alternatives. The model captured: rates of patient compliance; rates, frequency and duration of relapse; incidence of adverse events (bodyweight gain and extrapyramidal effects); and healthcare resource utilisation and associated costs. Primary outcomes were: the proportion of patients with relapse; the frequency of relapse per patient; the number of relapse days per patient; and total direct medical cost per patient per year. Costs are in year 2002 US dollars. Based on model projections, the proportions of patients experiencing a relapse requiring hospitalisation after 1 year of treatment were 66% for haloperidol decanoate LAI, 41% for oral risperidone and oral olanzapine and 26% for risperidone LAI, while the proportion of patients with a relapse not requiring hospitalisation were 60%, 37%, 37% and 24%, respectively. The mean number of days of relapse requiring hospitalisation per patient per year was 28 for haloperidol decanoate LAI, 18 for oral risperidone and oral olanzapine and 11 for risperidone LAI, while the mean number of days of relapse not requiring

  7. Combination treatment with risperidone long-acting injection and psychoeducational approaches for preventing relapse in schizophrenia

    Directory of Open Access Journals (Sweden)

    Zhao Y

    2013-10-01

    Full Text Available Yueren Zhao,1–3 Taro Kishi,1 Nakao Iwata,1 Manabu Ikeda3,4 1Department of Psychiatry, Fujita Health University School of Medicine, Toyoake, Aichi, Japan; 2Department of Psychiatry, Okehazama Hospital Fujita Kokoro Care Center, Toyoake, Aichi, Japan; 3Department of Neuropsychiatry, Graduate School of Medical Sciences, Kumamoto University, Kumamoto, Kumamoto, Japan; 4Department of Neuropsychiatry, Faculty of Life Sciences, Kumamoto University, Kumamoto, Kumamoto, Japan Abstract: A recent meta-analysis showed that long-acting injectable (LAI antipsychotics were not superior to oral antipsychotics for preventing relapse in patients with schizophrenia. We therefore designed a treatment strategy combining risperidone LAI and COMPASS (COMprehensive Psycho-educational Approach and Scheme Set, an original psychoeducational program supporting treatment with risperidone LAI and evaluating subjective treatment satisfaction, transition of symptoms, and effectiveness in preventing symptomatic relapse. The aim of this study was to examine whether addition of COMPASS to risperidone LAI was more effective in preventing relapse in schizophrenia patients than risperidone LAI alone, with the latter group consisting of patients enrolled in a Phase III trial of risperidone LAI in Japan. Patients were followed up for 6 months, with COMPASS continuously implemented from the transition to the observation phase. The primary efficacy measurements were relapse rate (rates of rehospitalization and discontinuation due to inefficacy. Secondary efficacy measurements were the Brief Psychiatric Rating Scale (BPRS and Global Assessment of Functioning (GAF scores. Of the 96 patients originally enrolled, 19 (19.8% were discontinued from all causes. During the 6-month study period, ten of the 96 patients (10.4% relapsed, compared with a 12.2% relapse rate in patients enrolled in a Phase III trial of risperidone LAI in Japan. Patients showed significant improvements in BPRS total

  8. Risperidone long-acting injection: a review of its long term safety and efficacy

    Directory of Open Access Journals (Sweden)

    Michael K Rainer

    2008-08-01

    Full Text Available Michael K RainerMemory-Clinic and Psychiatric Department, Donauspital, Vienna, AustriaAbstract: A long-acting form of the second-generation antipsychotic drug risperidone is now broadly available for the treatment of schizophrenia and closely related psychiatric conditions. It combines the advantage of previously available depot formulations for first-generation drugs with the favorable characteristics of the modern “atypical” antipsychotics, namely higher efficacy in the treatment of the negative symptoms of schizophrenia and reduced motor disturbances. Published clinical studies show an objective clinical efficacy (as per psychiatric symptom scores and relapse data that exceeds that of oral atypical antipsychotics when patients are switched to the long-acting injectable form, a low incidence of treatment-emergent extrapyramidal side effects, and very good acceptance by patients. Available data for maintenance treatment of bipolar disorder show equivalence with the oral form instead of superiority, but are still limited. As it seems likely that efficacy benefits are mostly due to the fact that the injectable form reduces the demand for patient compliance to one physician visit every 2 weeks instead of self-administration on a daily or twice-daily basis, additional potential could exist in other psychiatric disorders where atypical antipsychotic drugs are of benefit but where patient adherence to treatment schedules is typically low.Keywords: risperidone, schizophrenia, psychotic disorders, patient compliance; delayed-action preparations, injections, intramuscular

  9. Worsening of myasthenia gravis after administration of injectable long-acting risperidone for treatment of schizophrenia; first case report and a call for caution.

    Science.gov (United States)

    Al-Hashel, Jasem Y; Ismail, Ismail Ibrahim; John, John K; Ibrahim, Mohammed; Ali, Mahmoud

    2016-01-01

    Myasthenia gravis is an autoimmune disease characterized by muscle weakness due to autoantibodies affecting the neuromuscular junction. Co-occurrence of myasthenia gravis and schizophrenia is very rare and raises a challenge in management of both diseases. Antipsychotic drugs exhibit anticholinergic side effects and have the potentials of worsening myasthenia. Long-acting risperidone is an injectable atypical antipsychotic drug that has not been previously reported to worsen myasthenia gravis in literature. We report the first case report of worsening of myasthenia after receiving long-acting risperidone injection for schizophrenia in a 29-year-old female with both diseases. She started to have worsening 2 weeks following the first injection and her symptoms persisted despite receiving plasma exchange. This could be explained by the pharmacokinetics of the drug. We recommend that long-acting risperidone should be used with caution in patients with myasthenia gravis, and clinicians must be aware of the potential risks of this therapy. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. IVIVC from Long Acting Olanzapine Microspheres

    Directory of Open Access Journals (Sweden)

    Susan D'Souza

    2014-01-01

    Full Text Available In this study, four PLGA microsphere formulations of Olanzapine were characterized on the basis of their in vitro behavior at 37°C, using a dialysis based method, with the goal of obtaining an IVIVC. In vivo profiles were determined by deconvolution (Nelson-Wagner method and using fractional AUC. The in vitro and in vivo release profiles exhibited the same rank order of drug release. Further, in vivo profiles obtained with both approaches were nearly superimposable, suggesting that fractional AUC could be used as an alternative to the Nelson-Wagner method. A comparison of drug release profiles for the four formulations revealed that the in vitro profile lagged slightly behind in vivo release, but the results were not statistically significant (P0.96 between in vitro release and in vivo measurements confirmed the excellent relationship between in vitro drug release and the amount of drug absorbed in vivo. The results of this study suggest that proper selection of an in vitro method will greatly aid in establishing a Level A IVIVC for long acting injectables.

  11. A Retrospective Study of Long Acting Risperidone Use to Support Treatment Adherence in Youth with Conduct Disorder.

    Science.gov (United States)

    Demirkaya, Sevcan Karakoç; Aksu, Hatice; Özgür, Börte Gürbüz

    2017-11-30

    Risperidone has been widely used to control aggression and conduct disorder (CD) in youth; however, treatment compliance is a major problem in CD. Our aim is to evaluate the effectiveness and tolerability of long-acting risperidone (LAR) in treating nonadherent cases. The medical records of children and adolescents who had CD and were nonadherent to conventional drugs and psychosocial interventions (and therefore taking LAR) were reviewed. Informed consent on offlabel use of LAR was obtained from the parents. Clinical Global Impression (CGI) Severity (CGI-S) and CGI-Improvement scales were used and baseline and end points were compared. The study comprised 14 children and adolescents (5 girls, 9 boys). All had comorbid disorders: substance use disorder (n=8), attention deficit hyperactivity disorder (n=6), and major depression (n=2). Mean duration of LAR use was 3.1 months (1.5-8 months). We observed significant improvements in the baseline and endpoint CGI-S scores for CD in all but one patient (Z=-3.198; p <0.001). Only mild adverse effects were observed: weight gain (n=2), sedation (n=1), leg cramps (n=1), and increased appetite with no weight gain (n=1). LAR is effective and tolerable for patients with CD who can't be medicated with oral preparations due to nonadherence to treatment. Even short-term LAR use is effective to get compliance. As CD predicts numerous problems in adulthood, appropriate treatment is crucial. To our knowledge, this is the first study on LAR use in youth with CD. The use of LAR deserves careful consideration and further controlled studies are needed to confirm our findings.

  12. Long-term outcomes in patients with schizophrenia treated with risperidone long-acting injection or oral antipsychotics in Spain: results from the electronic Schizophrenia Treatment Adherence Registry (e-STAR).

    Science.gov (United States)

    Olivares, J M; Rodriguez-Morales, A; Diels, J; Povey, M; Jacobs, A; Zhao, Z; Lam, A; Villalobos Vega, J C; Cuéllar, J Alonso; de Castro, F J Alberca; Quintero, C Morillo-Velarde; Martíin, J F Román; Domínguez, P Tabares; Ojeda, J L Prados; Cortés, S Sanz; Cala, F I Mata; Marín, C Gutiérrez; Castro, L Moyano; Duaso, M A Haza; Albarracín, J Requena; Vergara, G Narbona; Benítez, A Fernández; Cleries, F Mayoral; Pérez-Brian, J M García-Herrera; Aragón, A Bordallo; Navarro, J C Rodríguez; Biedma, J A Algarra; de Pedro, R Bravo; González, J F Delgado; López, M E Jaén; Moreno, H Díaz; López, J A Soto; Rodríguez, E Ojeda; de Hoyos, C Martínez; Sacristán, M Pardilla; Martín, M D Molina; Ballesteros, E Martín; Rodríguez, P A Sopelana; Menéndez, L Fernández; Rivas, R Santos; del Pino Cuadrado, P; Lauffer, J Correas; Solano, J J Rodríguez; Martínez, J M Fernández; Solano, F García; Rodríguez, P García-Lamberde; Rodríguez, J A Romero; Cano, T Rodríguez; Fortacin, M Ducaju; Lobeiras, J M Blanco; Sampedro, J M Piñeiro; Bravo, A Pérez; Pellicer, A Fernández; López, M D Alonso; Liste, J Fraga; Fernández, M Riobo; Losada, A Casas; Mendez, R Vazquez-Noguerol; Romero, S Agra; Blanco, J J Blanco; Bonaselt, I Tortajada; Mahia, M C García; del Valle, E Ferrer Gómez; Yañez, P Quiroga; Camarasa, M Gelabert; Alonso, J A Barbado; Mendez, G Florez; Feliz, F Doce; Lamela, M A López; Piñero, M Vega; Alvarado, P Fuentes; Gómez, I López; Martín, P Fadon; Gómez, J L Santos; López, A García; Jiménez, A Rodríguez; Nafs, A Escudero; Barquero, N Casas; Ortiz, R Fernández-Villamor; Noguera, J L Velez; Carrasco, P Ruiz; Muñoz, J Martín; Palma, M Masegoza; Hortelano, C Marín; Bonome, L Sánchez; Sevilla, J Sánchez; Juan, J M Mongil San; Ramos, J M García; Muñoz, J L Vallejo; Guisasola, J Elorza; Vazquez, L Santamaria; Guerras, F Campo; Nebot, F J Arrufat; Fernández, F J Baron; Nicolau, A L Palomo; Subirats, R Catala; Kidias, M Messays; Navarro, V Fabregat; García, B Frades; del Rosal, F Mejias; de Vicente Muñoz, T; Ballester, J Año; Lieb, P Malabia; Martel, A Delgado; Bea, E Roca; Joaquim, I Grau; Enjuanes, F Boatas; Piñol, M Bañuelos; Carbonell, E Fontova I; Muñoz, R Martín; Giribets, C Argila; Sans, L Albages; Blanco, A Serrano; Felipe, M Arcega; Muñoz, P González; Villanueva, A Pons; Arroyo, M Bernardo; Borri, R Coronas; Fallada, S Miret; Merola, M Celma; Rodon, E Parellada; Palmes, J R Pigem; Martínez, E Pérez; Catala, J Matarredona; Coca, A Sandoval; Ferrandiz, F Pascual; Paya, E Ferrandiz; Caballero, G Iturri; Bonet, A Franco; Figueras, J Fluvia; Pagador, P Moreno; Garibo, M Medina; Camo, V Pérez; Carrillo, C Sanz; Valero, C Pelegrin; Rebollo, F J Caro; García Campayo, J; Sala Ayma, J M Sala; Roig, M Martínez; de Uña Mateos, M A; Bertolin, R García; García, A Martín; Mazo, F Jiménez; Velasco, J L Galvez; Pérez, L Santa Maria; Casado, C Jiménez; Barba, J J Mancheño; Diaz, M Conde; Rubio, J P Alcon; Mandoli, A Soler; Herrero, A Uson; Martínez, A Rodríguez; Serrano, P Salgado; Rodríguez, E Nieto; Montesinos, J Segui; Macia, J Ferragud; Mateos Marcos, A Mateos; Soto, J V Pérez-Fuster; Dumont, M Verdaguer; Pagan, J Parra; Martínez, V Balanza; Santiuste de Pablos, M; Delgado, C Espinosa; Quiles, M D Martínez; López, F J Manzanera; Navarro, P Pozo; Torres, A Micol; Ingles, F J Martínez; Arias-Camison, J M Salmeron; Manzano, J C López; Peña, R Villanueva; Guitarte, G Petersen; Fontecilla, H Blasco; Romero, J Barjau; Gil, R Sanz; Lozano, J Marín; Adanez, L Donaire; Zarranz Herrera-Oria, I; Jiménez, J Pérez; Vaz, F Carrato; García, O Sanz; Anton, C Contreras; Casula, R Reixach; Hernandez, M C Natividad; Escabias, F Teba; Torresano, J Rodríguez; Pérez-Villamil, A Huidobro; Estevez, L; Figuero, M Aragües; Muñoz de Morales, A; Calvin, J L Rodríguez; Criado, M Delgado; Rodríguez, V Molina; Ambrosolio, E Balbo; Madera, P M Holgado; Alfaro, G Ponce; Vidal, M M Rojas; Valtuille, A García; Ruiz, O; Cabornero, G Lucas; Echevarria Martínez de Bujo, M; Mallen, M J Maicas; Puigros, J Santandreu; Martorell, A Liñana; Forteza, A Clar; Arrebola, E Rodríguez; Rodríguez de la Torre, M; Saiz, C G Anton; Bardolet I Casas, C; Linde, E Rodríguez; De Arce Cordon, R; Molina, E M Padial; Carazo, F J Ruiz; Romero, J J Muro; Cano, D Vico; Dorado, M Soria; Velazquez, S Campos; Sánchez, A J Rodríguez; Leon, S Ocio; Sánchez, K Pachas; Benitez, M Henry; Zugarramurai, A Intxausti; Contreras, M A; De la Varga González, M; Marín, P Barreiro; Robina, F Gómez; García, M Sánchez; Pérez, F J Otero; Bros, P Cubero; Gómez, A Carrillo; de Dios Molina Martín, J; Perera, J L Carrasco; Averbach, M C; Perera, J L Carrasco; Palancares, E Goenaga; Gallego de Dios, M T; Rojo, C Fernández; Iglesias, S Sánchez; Merino, M I Rubio; Mestre, N Prieto; Urdaniz, A Pérez; Sánchez, J M Martínez; Seco, R Gordo; Muñoz, J Franco; Agut, M Mateos; Lozano, M L Blanco; Herguedas, F Martín; Pena, A Torcal; García, J Vicente; Martínez, A Varona; Sanz Granado, O Sanz; Fernández, M A Medina; Canseco, J M Moran; López, P A Megia; Martín, M A Franco; Barrio, J A Espina; Ubago, J Giner; Bennassar, M Roca; Díez, J M Olivares; Fleta, J L Hernandez; Fortes, F Porras; López, C Arango; Medina, O; Alvarez, D Figuera; Roca, J M Peña; Valladolid, G Rubio; Tavera, J A Furquet; García-Castrillon Sales, J A; Llordes, I Batalla; Melgarejo, C Anchuistegui; Cañas de la Paz, F; Callol, V Vallés; García, M Bousoño; García, J Bobes; Leal, F J Vaz; Corrales, E Cáceres; Iglesias, E Sánchez; Gómez, M A Carreiras; Serrano, G García; Chillarón, E G Román; Aguado, F J Samino; Castillo, J J Molina; González, A González; Vázquez, J Gallardo; Peralvarez, M Bolivar; Diaz, M Rios; Mesa, M Ybarzabal; Artiles, F J Acosta; Chao, M Ajoy; Mesa, M Ybarzabal; del Rosario Santana, P; Escudero, M A García; Berenguer, M Molla; Llacer, J M Bonete; Berna, J A Juan; Ortiz, J Barragán; Pardell, L Tost; Hernández-Alvarez de Sotomayor, C; Méndez, M R Cejas; Garate, R Cabrera; Múgica, B Díaz; González, M Caballero; Domingo, J Pujol; Navarro, C Sáez; Vera, G Selva; Cuquerella, M A; Monzo, J Lonjedo; Boada, P Cervera; Pérez, M F Martín; Parrado, E Carrasco; Sánchez, J J Yañez; Fernández, J Calvo

    2009-06-01

    The electronic Schizophrenia Treatment Adherence Registry (e-STAR) is a prospective, observational study of patients with schizophrenia designed to evaluate long-term treatment outcomes in routine clinical practice. Parameters were assessed at baseline and at 3 month intervals for 2 years in patients initiated on risperidone long-acting injection (RLAI) (n=1345) or a new oral antipsychotic (AP) (n=277; 35.7% and 36.5% on risperidone and olanzapine, respectively) in Spain. Hospitalization prior to therapy was assessed by a retrospective chart review. At 24 months, treatment retention (81.8% for RLAI versus 63.4% for oral APs, p<0.0001) and reduction in Clinical Global Impression Severity scores (-1.14 for RLAI versus -0.94 for APs, p=0.0165) were significantly higher with RLAI. Compared to the pre-switch period, RLAI patients had greater reductions in the number (reduction of 0.37 stays per patient versus 0.2, p<0.05) and days (18.74 versus 13.02, p<0.01) of hospitalizations at 24 months than oral AP patients. This 2 year, prospective, observational study showed that, compared to oral antipsychotics, RLAI was associated with better treatment retention, greater improvement in clinical symptoms and functioning, and greater reduction in hospital stays and days in hospital in patients with schizophrenia. Improved treatment adherence, increased efficacy and reduced hospitalization with RLAI offer the opportunity of substantial therapeutic improvement in schizophrenia.

  13. Cognitive and psychomotor effects of risperidone in schizophrenia and schizoaffective disorder.

    Science.gov (United States)

    Houthoofd, Sofie A M K; Morrens, Manuel; Sabbe, Bernard G C

    2008-09-01

    The aim of this review was to discuss data from double-blind, randomized controlled trials (RCTs) that have investigated the effects of oral and long-acting injectable risperidone on cognitive and psychomotor functioning in patients with schizophrenia or schizoaffective disorder. PubMed/MEDLINE and the Institute of Scientific Information Web of Science database were searched for relevant English-language double-blind RCTs published between March 2000 and July 2008, using the terms schizophrenia, schizoaffective disorder, cognition, risperidone, psychomotor, processing speed, attention, vigilance, working memory, verbal learning, visual learning, reasoning, problem solving, social cognition, MATRICS, and long-acting. Relevant studies included patients with schizophrenia or schizoaffective disorder. Cognitive domains were delineated at the Consensus Conferences of the National Institute of Mental Health-Measurement And Treatment Research to Improve Cognition in Schizophrenia (NIMH-MATRICS). The tests employed to assess each domain and psychomotor functioning, and the within-group and between-group comparisons of risperidone with haloperidol and other atypical antipsychotics, are presented. The results of individual tests were included when they were individually presented and interpretable for either drug; outcomes that were presented as cluster scores or factor structures were excluded. A total of 12 articles were included in this review. Results suggested that the use of oral risperidone appeared to be associated with within-group improvements on the cognitive domains of processing speed, attention/vigilance, verbal and visual learning and memory, and reasoning and problem solving in patients with schizophrenia or schizoaffective disorder. Risperidone and haloperidol seemed to generate similar beneficial effects (on the domains of processing speed, attention/vigilance, [verbal and nonverbal] working memory, and visual learning and memory, as well as psychomotor

  14. Pharmacogenomics and Efficacy of Risperidone Long-Term Treatment in Thai Autistic Children and Adolescents

    NARCIS (Netherlands)

    Nuntamool, Nopphadol; Ngamsamut, Nattawat; Vanwong, Natchaya; Puangpetch, Apichaya; Chamnanphon, Monpat; Hongkaew, Yaowaluck; Limsila, Penkhae; Suthisisang, Chuthamanee; Wilffert, Bob; Sukasem, Chonlaphat

    2017-01-01

    The purpose of this study was to evaluate the association of pharmacogenomic factors and clinical outcome in autistic children and adolescents who were treated with risperidone for long periods. Eighty-two autistic subjects diagnosed with DSM-IV and who were treated with risperidone for more than

  15. Effects of short- and long-term risperidone treatment on prolactin levels in children with autism.

    Science.gov (United States)

    Anderson, George M; Scahill, Lawrence; McCracken, James T; McDougle, Christopher J; Aman, Michael G; Tierney, Elaine; Arnold, L Eugene; Martin, Andrés; Katsovich, Liliya; Posey, David J; Shah, Bhavik; Vitiello, Benedetto

    2007-02-15

    The effects of short- and long-term risperidone treatment on serum prolactin were assessed in children and adolescents with autism. Patients with autism (N = 101, 5-17 years of age) were randomized to an 8-week trial of risperidone or placebo and 63 then took part in a 4-month open-label follow-up phase. Serum samples were obtained at Baseline and Week-8 (N = 78), and at 6-month (N = 43) and 22-month (N = 30) follow-up. Serum prolactin was determined by immunoradiometric assay; dopamine type-2 receptor (DRD2) polymorphisms were genotyped. Baseline prolactin levels were similar in the risperidone (N = 42) and placebo (N = 36) groups (9.3 +/- 7.5 and 9.3 +/- 7.6 ng/ml, respectively). After 8 weeks of risperidone, prolactin increased to 39.0 +/- 19.2 ng/ml, compared with 10.1 +/- 8.8 ng/ml for placebo (p autism. Although risperidone-induced increases tended to diminish with time, further research on the consequences of long-term prolactin elevations in children and adolescents is needed.

  16. Treatment of anorexia nervosa with long-term risperidone in an outpatient setting: case study.

    Science.gov (United States)

    Kracke, Elsa J; Tosh, Aneesh K

    2014-01-01

    There are currently few studies focusing on the efficacy of long-term atypical antipsychotics to treat anorexia nervosa in the pediatric population. This case report follows the treatment of a 17 year-old female with anorexia nervosa over her four-year undergraduate career. After two years of multidisciplinary treatment, low-dose risperidone was initiated due to persistence of her disease. She expressed decreased rigidity around meal times, her weight improved and she had resumption of menses. She was compliant with treatment through graduation and maintained her weight gain. Atypical antipsychotics are a treatment option in the management of anorexia nervosa. Risperidone has not been studied as frequently as olanzapine for eating disorders. Risperidone was chosen for its more favorable side effect profile and decreased cost to the patient. Previous studies on anorexia nervosa treatment have occurred during inpatient treatment and have limited follow-up due to patients' refusal to initiate or maintain medication compliance. This case presents 17 months of outpatient data. The efficacy of risperidone therapy was evaluated with frequent weight checks, subjective decrease in rigidity, serial complete metabolic panels, and restoration of menses. In this case report, an adolescent female treated with low-dose risperidone had decreased rigid thinking, weight gain and resolution of secondary amenorrhea without medication side effects. Therefore, the atypical antipsychotic risperidone may be an effective long-term outpatient treatment option for patients with anorexia nervosa.

  17. Pharmacogenomics and Efficacy of Risperidone Long-Term Treatment in Thai Autistic Children and Adolescents.

    Science.gov (United States)

    Nuntamool, Nopphadol; Ngamsamut, Nattawat; Vanwong, Natchaya; Puangpetch, Apichaya; Chamnanphon, Monpat; Hongkaew, Yaowaluck; Limsila, Penkhae; Suthisisang, Chuthamanee; Wilffert, Bob; Sukasem, Chonlaphat

    2017-10-01

    The purpose of this study was to evaluate the association of pharmacogenomic factors and clinical outcome in autistic children and adolescents who were treated with risperidone for long periods. Eighty-two autistic subjects diagnosed with DSM-IV and who were treated with risperidone for more than 1 year were recruited. Pharmacogenomics and clinical outcome (CGI-I, aggressive, overactivity and repetitive score) were evaluated. Almost all patients showed stable symptoms on aggressive behaviour (89.02%), overactivity (71.95%), repetitive (70.89%) behaviour and all clinical symptoms (81.71%). Only 4.48% of patients showed minimally worse CGI-I score. Patients in the non-stable symptom group had DRD2 Taq1A non-wild-type (TT and CT) frequencies higher than the clinically stable group (p = 0.04), whereas other gene polymorphisms showed no significant association. Haplotype ACCTCAT (rs6311, rs1045642, rs1128503, rs1800497, rs4436578, rs1799978, rs6280) showed a significant association with non-stable clinical outcome (χ 2  = 6.642, p = 0.010). Risperidone levels showed no association with any clinical outcome. On the other hand, risperidone dose, 9-OH risperidone levels and prolactin levels were significantly higher in the non-stable compared to the stable symptom group (p = 0.013, p = 0.044, p = 0.030). Increased appetite was the most common adverse drug reaction and associated with higher body-weight, whereas it was not significantly associated with genetic variations and non-genetic information. In conclusion, risperidone showed efficacy to control autism, especially aggressive symptoms in long-term treatment. However, Taq1A T - carrier of dopamine 2 receptor gene - is associated with non-stable response in risperidone-treated patients. This study supports pharmacogenomics testing for personalized therapy with risperidone in autistic children and adolescents. © 2017 Nordic Association for the Publication of BCPT (former Nordic Pharmacological Society).

  18. Risperidone long-acting injection in the treatment of schizophrenia: 24-month results from the electronic Schizophrenia Treatment Adherence Registry in Canada

    Directory of Open Access Journals (Sweden)

    Williams R

    2014-02-01

    Full Text Available Richard Williams,1 Ranjith Chandrasena,2 Linda Beauclair,3 Doanh Luong,4 Annette Lam4 On behalf of the e-STAR study group 1Vancouver Island Health Authority, Victoria, BC, Canada; 2Chatham-Kent Health Alliance, Chatham, ON, Canada; 3Allan Memorial Institute, Montreal, QC, Canada; 4Janssen Inc., Toronto, ON, Canada Objective: To assess outcomes over 24 months in Canadian patients with schizophrenia initiated on risperidone long-acting injection (RLAI and participating in the electronic Schizophrenia Treatment Adherence Registry (e-STAR. Materials and methods: Patients with schizophrenia or schizoaffective disorder were enrolled from 24 sites after an independent decision to initiate RLAI. Subsequent patient management was based on usual clinical practice at each site and was not protocol-driven. Relevant data were collected retrospectively by chart review for 12 months prior to RLAI and prospectively for 24 months following RLAI initiation. Results: Patients (n=188 had a mean age of 39.2 years, were 66.3% male, and 27.7% were inpatients at baseline. Twenty-four months after initiating therapy (initial dose =28.7 mg, 34.1% (95% confidence interval 27.2%–42.2% of patients had discontinued RLAI with a mean time to discontinuation of 273.4±196 days. Over the treatment period, there were significant (P<0.001 changes from baseline in Clinical Global Impression-Severity (CGI-S; 3.48 versus [vs] 4.31 at baseline, Global Assessment of Functioning (GAF; 56.1 vs 48.1, and Personal and Social Performance (PSP; 59.1 vs 46.9 scale scores. In addition, after 12 months, there were significant (P<0.001 decreases in the percentage of patients hospitalized (23.9% vs 58.5% pre-RLAI, mean length of stay (11.4 vs 30.4 days, and number of hospitalizations (0.32 vs 0.87 compared to the 12-month pre-RLAI period. Reductions in hospitalization continued into the second 12 months of therapy, when only 9% of patients were hospitalized and mean length of stay was 2.0 days

  19. The cost effectiveness of long-acting/extended-release antipsychotics for the treatment of schizophrenia: a systematic review of economic evaluations.

    Science.gov (United States)

    Achilla, Evanthia; McCrone, Paul

    2013-04-01

    Antipsychotic medication is the mainstay of treatment in schizophrenia. Long-acting medication has potential advantages over daily medication in improving compliance and thus reducing hospitalization and relapse rates. The high acquisition and administration costs of such formulations raise the need for pharmacoeconomic evaluation. The aim of this article is to provide a comprehensive review of the available evidence on the cost effectiveness of long-acting/extended-release antipsychotic medication and critically appraise the strength of evidence reported in the studies from a methodological viewpoint. Relevant studies were identified by searching five electronic databases: PsycINFO, MEDLINE, EMBASE, the NHS Economic Evaluation Database and the Health Technology Assessment database (HTA). Search terms included, but were not limited to, 'long-acting injection', 'economic evaluation', 'cost-effectiveness' and 'cost-utility'. No limits were applied for publication dates and language. Full economic evaluations on long-acting/extended-release antipsychotics were eligible for inclusion. Observational studies and clinical trials were also checked for cost-effectiveness information. Conference abstracts and poster presentations on the cost effectiveness of long-acting antipsychotics were excluded. Thirty-two percent of identified studies met the selection criteria. Pertinent abstracts were reviewed independently by two reviewers. Relevant studies underwent data extraction by one reviewer and were checked by a second, with any discrepancies being clarified during consensus meetings. Eligible studies were assessed for methodological quality using the quality checklist for economic studies recommended by the NICE guideline on interventions in the treatment and management of schizophrenia. After applying the selection criteria, the final sample consisted of 28 studies. The majority of studies demonstrated that risperidone long-acting injection, relative to oral or other long-acting

  20. [Cost-effectiveness analysis of schizophrenic patient care settings: impact of an atypical antipsychotic under long-acting injection formulation].

    Science.gov (United States)

    Llorca, P M; Miadi-Fargier, H; Lançon, C; Jasso Mosqueda, G; Casadebaig, F; Philippe, A; Guillon, P; Mehnert, A; Omnès, L F; Chicoye, A; Durand-Zaleski, I

    2005-01-01

    pharmaceutical formulation of antipsychotics. Hospitalization and relapse risks are lower in compliant than in non-compliant patients. The main objective of this pharmacoeconomic analysis is to evaluate the impact in terms of medical benefits and costs of the following strategies: 1. Risperidone long-acting injection: first long-acting injectable atypical antipsychotic; 2. Haloperidol depot: long-acting injectable conventional neuroleptic; 3. Olanzapine: atypical antipsychotic available commercially in oral formulation. The target population defined for the study are young schizophrenic patients treated for at least 1 year and whose disorder has not been diagnosed for longer than 5 years. The time horizon is 2 years. A cost-effectiveness analysis is performed. The perspective adopted is the French Health System. The main hypothesis of the model is that an increase in compliance linked to the use of long-acting injectable formulation could lead to an increased efficacy and a modification of the cost-effectiveness ratio. A decision tree was built. Six periods of follow-up are identified with a duration of 4-months per period. The tree contains 3 principal arms, each one corresponding to a specific treatment: risperidone LA injection, haloperidol decanoate and olanzapine. For each arm, at the chance node, two health states are identified: either the patient responds favourably to the treatment or does not respond favourably and requires a switch to another drug treatment. After a period of response, the patient can either remain in the same state or experiences a clinical deterioration. If the patient presents a clinical deterioration, he can either go back to a positive response state after a period of intensive follow-up or remain in an insufficient response state; in this case, a change of antipsychotic treatment is necessary. In the model, a patient should receive four different treatments before a long-term hospitalization takes put in place. According to the market

  1. Long acting risperidone in Australian patients with chronic schizophrenia: 24-month data from the e-STAR database

    Directory of Open Access Journals (Sweden)

    Lambert Tim

    2012-03-01

    Full Text Available Abstract Background This observational study was designed to collect treatment outcomes data in patients using the electronic Schizophrenia Treatment Adherence Registry (e-STAR. Methods Patients with schizophrenia or schizoaffective disorder in Australia who were prescribed risperidone long-acting injection (RLAI between 2003 and 2007 were assessed 12-months retrospectively, at baseline and 24-months prospectively at 3-monthly intervals. The intent-to-treat population, defined as all patients who received at least one dose of RLAI at baseline, was used for the efficacy and safety analyses. Results At total of 784 patients (74% with schizophrenia, 69.8% male with a mean age of 37.1 ± 12.5 years and 10.6 ± 9.5 years since diagnosis were included in this Australian cohort. A significant improvement in mean Clinical Global Impression - severity score was observed at 24-months (4.52 ± 1.04 at baseline, 3.56 ± 1.10 at 24-months. Most of this improvement was seen by 3-months and was also reflected in mean Global Assessment of Functioning score, which improved significantly at 24-months (42.9 ± 14.5 at baseline, 59 ± 15.4 at 24-months. For patients still receiving RLAI at 24-months there was an increase from a mean baseline RLAI dose of 26.4 ± 5 mg to 43.4 ± 15.7 mg. Sixty-six percent of patients discontinued RLAI before the 24-month period--this decreased to 46% once patients lost to follow-up were excluded. Conclusion Over the 24-month period, initiation of RLAI was associated with improved patient functioning and illness severity in patients with schizophrenia or schizoaffective disorder. Improved outcomes were observed early and sustained throughout the study. Trial Registration Clinical Trials Registration Number, NCT00283517.

  2. Medication adherence in patients with psychotic disorders: an observational survey involving patients before they switch to long-acting injectable risperidone

    Directory of Open Access Journals (Sweden)

    Baylé FJ

    2015-09-01

    Full Text Available Franck Jean Baylé,1 Arnaud Tessier,2,3 Sophie Bouju,4 David Misdrahi2,3 1Sainte-Anne Hospital (SHU, Paris V-Descartes University, Paris, 2Hôpital Charles Perrens, Pôle de Psychiatrie Adulte, 3CNRS UMR 5287-INCIA, Bordeaux University, Bordeaux, 4Janssen-Cilag France, Issy Les Moulineaux, Paris, France Background: Maintaining antipsychotic therapy in psychosis is important in preventing relapse. Long-acting depot preparations can prevent covert non-adherence and thus potentially contribute to better patient outcomes. In this observational survey the main objective is to evaluate medication adherence and its determinants for oral treatment in a large sample of patients with psychosis.Methods: In this cross-sectional survey medication adherence for oral treatment was assessed by patients using the patient-rated Medication Adherence Questionnaire (MAQ. Data were collected by physicians on patients with a recent acute psychotic episode before switching to long-acting injectable risperidone. Other evaluations included disease severity (Clinical Global Impression – Severity, patients’ insight (Positive and Negative Syndrome Scale item G12, treatment acceptance (clinician-rated Compliance Rating Scale, and therapeutic alliance (patient-rated 4-Point ordinal Alliance Scale.Results: A total of 399 psychiatrists enrolled 1,887 patients (mean age 36.8±11.9 years; 61.6% had schizophrenia. Adherence to oral medication was “low” in 53.2% of patients, “medium” in 29.5%, and “high” in 17.3%. Of patients with psychiatrist-rated active acceptance of treatment, 70% had “medium” or “high” MAQ scores (P<0.0001. Medication adherence was significantly associated with therapeutic alliance (4-Point ordinal Alliance Scale score; P<0.0001. Patient age was significantly associated with adherence: mean age increased with greater adherence (35.6, 36.7, and 38.6 years for patients with “low”, “medium”, and “high” levels of adherence

  3. Six-month open-label follow-up of risperidone long-acting injection use in pediatric bipolar disorder.

    Science.gov (United States)

    Boarati, Miguel A; Wang, Yuan-Pang; Ferreira-Maia, Ana Paula; Cavalcanti, Ana Rosa S; Fu-I, Lee

    2013-01-01

    Recent studies suggest that risperidone long-acting injection (RLAI) may be considered for controlling mood episodes in bipolar disorder patients who have relapsed due to medication nonadherence or failure to respond to standard therapies. Currently, no study has reported the usefulness of RLAI in youths with bipolar disorder. The aim of this study was to evaluate short-term effects of RLAI in the naturalistic treatment of early-onset bipolar disorder and its role in symptomatic remission and adherence to treatment. Nineteen early-onset bipolar disorder outpatients receiving RLAI were observed in a 6-month naturalistic study at the outpatient clinic of the Child and Adolescent Affective Disorders Program at the Institute of Psychiatry of the University of São Paulo, São Paulo, Brazil. All patients met DSM-IV criteria for bipolar disorder. Clinical response to RLAI was evaluated using the Children's Global Assessment Scale (CGAS) and Clinical Global Impressions scale (CGI) across 3 time periods: index time (T0), 8 weeks after (T1), and 24 weeks after (T2). These subjects were recruited from May 2008 to December 2009. Patients receiving RLAI presented considerable improvement in global functioning (CGAS: T0 = 20.6; T1 = 42.9; and T2 = 49.2) and clinical severity (CGI: T0 = 5.9; T1 = 3.9; and T2 = 3.4). Global CGI mean scores of clinical improvement were 2.2 at T1 and 2.4 at T2. There were no significant changes in laboratory measurements and weight throughout follow-up. RLAI was shown to be an alternative treatment for youths with bipolar disorder failing to respond to prior medication trials or with adherence problems. Further blind, randomized controlled studies are necessary to confirm these initial findings. Sistema Nacional de Informaçōes Sobre Ética em Pesquisa Envolvendo Seres Humanos-Commisão Nacional de Ética em Pesquisa identifier: CAAE 0709.0.015.000-06.

  4. Risperidone versus typical antipsychotic medication for schizophrenia.

    Science.gov (United States)

    Hunter, R H; Joy, C B; Kennedy, E; Gilbody, S M; Song, F

    2003-01-01

    found in long-term studies (n=859, 2RCTs RR not 20% improved 0.51 CI 0.38 to 0.67 NNT 4;n=675 1RCT, RR not improved 40% 0.75 CI 0.66 to 0.84 NNT 5; n=675, 1 RCT, RR not 60% improved 0.90 CI 0.84 to 0.96, NNT 11). Risperidone was also more likely to reduce relapse at one year follow up, compared with haloperidol (n=367, 1 RCT, RR 0.64 CI 0.41 to 0.99, NNT 7). Less people allocated risperidone left studies before completion, both for short-term (n=3066, 16 RCTs, RR 0.76 CI 0.63 to 0.92, NNT 6) and long-term trials (n=1270, 4RCTs, RR 0.55 CI 0.42 to 0.73 NNT 4). For general movement disorders results favoured risperidone. People given risperidone had significantly fewer general movement disorders (including extrapyramidal side effects) than those receiving older typical antipsychotics (n=2702, 10 RCTs, RR 0.63 CI 0.56 to 0.71, NNT 3). Significantly fewer people given risperidone used antiparkinsonian drugs (n=2524, 11 RCTs, RR 0.66 CI 0.58 to 0.74, NNT 4). As regards body weight, however, four studies (n=1708) found people were more likely to gain weight if allocated risperidone compared to typical antipsychotics (RR 1.55 CI 1.25 to 1.93, NNH 3). Risperidone was no more or less likely than haloperidol to cause sexual problems such as erectile dysfunction (n=106, 2 RCTs, RR 1.55 CI 0.58 to 4.20). Finally, some results found risperidone was more likely to cause rhinitis than conventional antipsychotics (n=656, 3 RCTs, RR1.99 CI 1.24 to 3.19, NNH 3). Risperidone may be more acceptable to those with schizophrenia than older antipsychotics and have marginal benefits in terms of limited clinical improvement. Its adverse effect profile may be better than haloperidol. With the addition of more studies to this review, the publication bias evident in previous versions is no longer a significant issue. Any marginal benefits this drug may have have to be balanced against its greater cost and increased tendency to cause side effects such as weight gain. Recent important longer term

  5. An open-label, multicenter evaluation of the long-term safety and efficacy of risperidone in adolescents with schizophrenia

    Directory of Open Access Journals (Sweden)

    Pandina Gahan

    2012-06-01

    Full Text Available Abstract Background Data on the long-term efficacy, safety, and tolerability of risperidone in adolescents with schizophrenia are limited. The objective of this study was to evaluate the efficacy and safety of maintenance risperidone treatment in adolescents with schizophrenia. Methods This open-label study of adolescents aged 13 to 17 years with schizophrenia was a single extension study of two short-term double-blind risperidone studies and also enrolled subjects directly in open-label risperidone treatment. The risperidone dose was flexible and ranged from 2 to 6 mg/day. Most subjects enrolled for 6 months; a subset enrolled for 12 months. Assessment tools included the Positive and Negative Syndrome Scale total and factor scores, Clinical Global Impressions, Children’s Global Assessment Scale, adverse event (AE monitoring, vital signs, laboratory testing, and extrapyramidal symptom rating scales. Results A total of 390 subjects were enrolled; 48 subjects had received placebo in a previous double-blind study; 292 subjects had received risperidone as part of their participation in one of two previous controlled studies; and 50 subjects were enrolled directly for this study. A total of 279 subjects enrolled for 6 months of treatment, and 111 subjects enrolled for 12 months of treatment. Overall, 264 (67.7% subjects completed this study: 209 of the 279 subjects (75% in the 6-month group and 55 of the 111 subjects (50% in the 12-month group. The median mode dose was 3.8 mg/day. At 6 months, all three groups experienced improvement from open-label baseline in symptoms of schizophrenia as well as general assessments of global functioning. Improvements were generally maintained for the duration of treatment. The most common AEs (≥10% of subjects were somnolence, headache, weight increase, hypertonia, insomnia, tremor, and psychosis. Potentially prolactin-related AEs (PPAEs were reported by 36 (9% subjects. The AE profile in this study was

  6. Risperidone-induced reversible neutropenia.

    Science.gov (United States)

    Kattalai Kailasam, Vasanth; Chima, Victoria; Nnamdi, Uchechukwu; Sharma, Kavita; Shah, Kairav

    2017-01-01

    This case report presents a 44-year-old man with a history of schizophrenia who developed neutropenia on risperidone therapy. The patient's laboratory reports showed a gradual decline of leukocytes and neutrophils after resolution and rechallenging. This was reversed with the discontinuation of risperidone and by switching to olanzapine. In this case report, we also discuss the updated evidence base for management of risperidone-induced neutropenia.

  7. Second-generation long-acting injectable antipsychotics in schizophrenia: patient functioning and quality of life

    Directory of Open Access Journals (Sweden)

    Montemagni C

    2016-04-01

    Full Text Available Cristiana Montemagni,1,2 Tiziana Frieri,1,2 Paola Rocca1,2 1Department of Neuroscience, Unit of Psychiatry, University of Turin, 2Department of Mental Health, Azienda Sanitaria Locale (ASL Torino 1 (TO1, Azienda Ospedaliero-Universitaria (AOU Città della Salute e della Scienza di Torino, Turin, Italy Abstract: Long-acting injectable antipsychotics (LAIs were developed to make treatment easier, improve adherence, and/or signal the clinician when nonadherence occurs. Second-generation antipsychotic LAIs (SGA-LAIs combine the advantages of SGA with a long-acting formulation. The purpose of this review is to evaluate the available literature concerning the impact of SGA-LAIs on patient functioning and quality of life (QOL. Although several studies regarding schizophrenia patients’ functioning and QOL have been performed, the quantity of available data still varies greatly depending on the SGA-LAI under investigation. After reviewing the literature, it seems that SGA-LAIs are effective in ameliorating patient functioning and/or QOL of patients with schizophrenia, as compared with placebo. However, while methodological design controversy exists regarding the superiority of risperidone LAI versus oral antipsychotics, the significant amount of evidence in recently published research demonstrates the beneficial influence of risperidone LAI on patient functioning and QOL in stable patients and no benefit over oral treatment in unstable patients. However, the status of the research on SGA-LAIs is lacking in several aspects that may help physicians in choosing the correct drug therapy. Meaningful differences have been observed between SGA-LAIs in the onset of their clinical efficacy and in the relationships between symptoms and functioning scores. Moreover, head-to-head studies comparing the effects of SGA-LAIs on classical measures of psychopathology and functioning are available mainly on risperidone LAI, while those comparing olanzapine LAI with other

  8. Long pulse microsphere experiments at 3 TW

    International Nuclear Information System (INIS)

    Boyle, M.J.; Attwood, D.T.; Brooks, K.M.

    1977-01-01

    Previous 1.06 μm laser implosion experiments have explored the parameter space associated with microsphere targets of typically less than 100 psec. Exploding pusher experiments have now been performed using long pulses (100 to 200 psec FWHM), and large diameter (100 to 150 μm) targets on the 3 TW Argus laser facility. Absorption, transport, implosion and neutron and α yield characteristics are discussed and compared with earlier short pulse results. The observed neutron yields are discussed in light of the temporal mismatch between the absorption and implosion time scales imposed by the large diameter, long pulse conditions

  9. Formulation, in vitro and in vivo evaluation of transdermal patches containing risperidone.

    Science.gov (United States)

    Aggarwal, Geeta; Dhawan, Sanju; Hari Kumar, S L

    2013-01-01

    The efficacy of oral risperidone treatment in prevention of schizophrenia is well known. However, oral side effects and patient compliance is always a problem for schizophrenics. In this study, risperidone was formulated into matrix transdermal patches to overcome these problems. The formulation factors for such patches, including eudragit RL 100 and eudragit RS 100 as matrix forming polymers, olive oil, groundnut oil and jojoba oil in different concentrations as enhancers and amount of drug loaded were investigated. The transdermal patches containing risperidone were prepared by solvent casting method and characterized for physicochemical and in vitro permeation studies through excised rat skin. Among the tested preparations, formulations with 20% risperidone, 3:2 ERL 100 and ERS 100 as polymers, mixture of olive oil and jojoba oil as enhancer, exhibited greatest cumulative amount of drug permeated (1.87 ± 0.09 mg/cm(2)) in 72 h, so batch ROJ was concluded as optimized formulation and assessed for pharmacokinetic, pharmacodynamic and skin irritation potential. The pharmacokinetic characteristics of the optimized risperidone patch were determined using rabbits, while orally administered risperidone in solution was used for comparison. The calculated relative bioavailability of risperidone transdermal patch was 115.20% with prolonged release of drug. Neuroleptic efficacy of transdermal formulation was assessed by rota-rod and grip test in comparison with control and marketed oral formulations with no skin irritation. This suggests the transdermal application of risperidone holds promise for improved bioavailability and better management of schizophrenia in long-term basis.

  10. Fabrication of flower-like tin/carbon composite microspheres as long-lasting anode materials for lithium ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Tae-Woo [Department of Chemical Engineering, College of Engineering, Hanyang University, Seoul, 133-791 (Korea, Republic of); Lim, Hyung-Seok [Department of WCU Engineering, College of Engineering, Hanyang University, Seoul, 133-791 (Korea, Republic of); Park, Seong-Jin [Department of Chemical Engineering, College of Engineering, Hanyang University, Seoul, 133-791 (Korea, Republic of); Sun, Yang-Kook [Department of WCU Engineering, College of Engineering, Hanyang University, Seoul, 133-791 (Korea, Republic of); Suh, Kyung-Do, E-mail: kdsuh@hanyang.ac.kr [Department of Chemical Engineering, College of Engineering, Hanyang University, Seoul, 133-791 (Korea, Republic of)

    2017-01-01

    In this work, we report the fabrication of the flower-like tin/carbon (Sn/C) composite microspheres using sulfonated semi-interpenetrating polystyrene (SPS) microspheres as a carbon precursor. The sulfonation degree of SPS has great effects on the resulting particle size, morphology, amount of introduced Sn, and the carbonization yield of the microspheres after heat treatment. The obtained Sn/C composite microspheres were characterized by scanning electron microscopy (SEM), focused-ion beam SEM, and X-ray diffraction. The flower-like Sn/C composite electrodes exhibited higher charge-discharge capacities than those of graphite as an anode material for a lithium ion battery. In addition, they show a long lasting cyclability, even through 400 cycles. - Highlights: • Tin nanocrystals are introduced in flower-like carbon spheres with many ripples. • Long lasting cyclability is exhibited at 1 C rate up to 400 cycles. • Tin content of composite spheres depends on chemical treatment of polymer microspheres.

  11. Long-acting injectable antipsychotics: focus on olanzapine pamoate

    Directory of Open Access Journals (Sweden)

    JP Lindenmayer

    2010-05-01

    Full Text Available JP LindenmayerDepartment of Psychiatry, New York University School of Medicine, New York NY, USAAbstract: Medication non-adherence in patients with schizophrenia continues to be a significant problem and threatens successful treatment outcomes. Medication non-adherence is often associated with negative consequences, including symptom exacerbation, more frequent emergency room visits, re-hospitalizations and relapse. Long-acting injectable (LAI forms of antipsychotics allow for rapid identification of non-adherence, obviate the need for the patient to take the medication on a daily basis and increase adherence to some significant degree. Eli Lilly has developed a long-acting depot formulation of olanzapine, olanzapine pamoate, which has recently been approved by the FDA for the US market, and which will be reviewed here. Olanzapine LAI appears to be an effective antipsychotic at dosages of 210 mg every 2 weeks, 300 mg every 2 weeks and 405 mg every 4 weeks in patients with acute schizophrenia, and at 150 mg every 2 weeks, 300 mg every 2 weeks and at 405 mg every 4 weeks for the maintenance treatment of stable patients. Oral supplementation appears not to be needed, particularly not at the onset of treatment with the LAI as is necessary with risperidone LAI. Its efficacy is in general comparable to the efficacy seen with oral olanzapine at a corresponding dose. The side effect profile is also comparable to the side effects observed with oral olanzapine, including lower rates of extrapyramidal symptoms, prolactin elevation and cardiovascular side effects, but significant metabolic effects. The latter include significant weight gain, lipid abnormalities and glucose dysregulation. While the injection site adverse events are overall mild, the most significant serious adverse event is the post-injection delirium sedation syndrome (PDSS. While rare, this syndrome results from inadvertent intravascular injection of olanzapine LAI and can cause a range of

  12. Pharmacology and clinical experience with risperidone.

    Science.gov (United States)

    Love, R C; Nelson, M W

    2000-12-01

    Risperidone (Risperdal, Janssen Pharmaceutica) is a second generation antipsychotic (SGA) for the treatment of schizophrenia and other psychotic disorders. It is a potent antagonist of serotonin-2 (5-HT2) and dopamine-2 (D2) receptors in the brain. In comparison to conventional antipsychotics, risperidone demonstrates superior efficacy against the positive and negative symptoms of schizophrenia and a decreased occurrence of extrapyramidal side effects (EPS). Risperidone causes less weight gain than other marketed SGAs, but can increase prolactin levels and cause EPS in a dose-related manner. In a variety of pharmacoeconomic analyses, it has proven to be a cost-effective addition to the antipsychotic armamentarium. As the first SGA available for front line use, risperidone has established a new standard of care for the treatment of individuals with psychotic disorders.

  13. Early-life risperidone enhances locomotor responses to amphetamine during adulthood.

    Science.gov (United States)

    Lee Stubbeman, Bobbie; Brown, Clifford J; Yates, Justin R; Bardgett, Mark E

    2017-10-05

    Antipsychotic drug prescriptions for pediatric populations have increased over the past 20 years, particularly the use of atypical antipsychotic drugs such as risperidone. Most antipsychotic drugs target forebrain dopamine systems, and early-life antipsychotic drug exposure could conceivably reset forebrain neurotransmitter function in a permanent manner that persists into adulthood. This study determined whether chronic risperidone administration during development modified locomotor responses to the dopamine/norepinephrine agonist, D-amphetamine, in adult rats. Thirty-five male Long-Evans rats received an injection of one of four doses of risperidone (vehicle, .3, 1.0, 3.0mg/kg) each day from postnatal day 14 through 42. Locomotor activity was measured for 1h on postnatal days 46 and 47, and then for 24h once a week over the next two weeks. Beginning on postnatal day 75, rats received one of four doses of amphetamine (saline, .3, 1.0, 3.0mg/kg) once a week for four weeks. Locomotor activity was measured for 27h after amphetamine injection. Rats administered risperidone early in life demonstrated increased activity during the 1 and 24h test sessions conducted prior to postnatal day 75. Taking into account baseline group differences, these same rats exhibited significantly more locomotor activity in response to the moderate dose of amphetamine relative to controls. These results suggest that early-life treatment with atypical antipsychotic drugs, like risperidone, permanently alters forebrain catecholamine function and increases sensitivity to drugs that target such function. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Risperidone as a treatment for childhood habitual behavior

    Science.gov (United States)

    Omranifard, Victoria; Najafi, Mostafa; Sharbafchi, Mohammad Reza; Emami, Parisa; Maracy, Mohammad

    2013-01-01

    Objective: The aim of this study was to investigate the effect of adding risperidone to the general behavioral treatment of masturbation in children 3-7 years old. Methods: A 4 week randomized clinical controlled trial was designed in year 2009. Samples have been chosen from children who have been referred to the Child and Adolescence Psychiatric Clinic of Isfahan University of Medical Sciences. Ninety children were recruited at the study and randomly allocated into the risperidone and control groups (44 and 46 respectively). The risperidone group was medicated simultaneously by behavioral treatments and 0.25-1 mg of risperidone daily while the controls only received the behavioral treatments. Findings: The mean ± SD age of the risperidone and control groups was 5.3 ± 1.1 and 4.9 ± 1.1 years, respectively. The mean ± SD of the period of suffering from masturbation was 3.4 ± 1.2 and 3.8 ± 1.7 months in the risperidone and the control groups, respectively. At the beginning of the study, the mean frequency of masturbation in control and the risperidone groups was 2.6 ± 0.9 and 2.7 ± 0.9 times/day, whereas after the 4th week, it decreased to 1.4 ± 0.6 and 1.1 ± 0.5 times/day, respectively. The results showed a more reduction in the mean frequency of masturbation in the risperidone group significantly. Conclusion: In comparison to the general behavioral treatment, risperidone in addition to the behavioral treatment will probably reduce the frequency of masturbation in children more effectively. PMID:24991601

  15. Differential Long-Term Effects of Haloperidol and Risperidone on the Acquisition and Performance of Tasks of Spatial Working and Short-Term Memory and Sustained Attention in Rats

    Science.gov (United States)

    Hutchings, Elizabeth J.; Waller, Jennifer L.

    2013-01-01

    A common feature of the neuropsychiatric disorders for which antipsychotic drugs are prescribed is cognitive dysfunction, yet the effects of long-term antipsychotic treatment on cognition are largely unknown. In the current study, we evaluated the effects of long-term oral treatment with the first-generation antipsychotic haloperidol (1.0 and 2.0 mg/kg daily) and the second-generation antipsychotic risperidone (1.25 and 2.5 mg/kg daily) on the acquisition and performance of two radial-arm maze (RAM) tasks and a five-choice serial reaction-time task (5C-SRTT) in rats during days 15–60 and 84–320 days of treatment, respectively. In the RAM, neither antipsychotic significantly affected the acquisition or performance of a spatial win shift or a delayed non–match-to-position task. Conversely, in the rats administered 5C-SRTT, haloperidol was associated with profound deficits in performance, and the subjects were not able to progress through all stages of task acquisition. Depending on the dose, risperidone was associated with a greater number of trials to meet specific performance criteria during task acquisition compared with vehicle-treated controls; however, most subjects were eventually able to achieve all levels of task acquisition. Both haloperidol and risperidone also increased the number of perseverative and time-out responses during certain stages of task acquisition, and the response and reward latencies were slightly higher than controls during several stages of the study. These results in rats suggest that while long-term treatment with haloperidol or risperidone may not significantly affect spatial working or short-term memory, both antipsychotics can (depending on dose) impair sustained attention, decrease psychomotor speed, increase compulsive-type behaviors, and impair cognitive flexibility. PMID:24042161

  16. Differential long-term effects of haloperidol and risperidone on the acquisition and performance of tasks of spatial working and short-term memory and sustained attention in rats.

    Science.gov (United States)

    Hutchings, Elizabeth J; Waller, Jennifer L; Terry, Alvin V

    2013-12-01

    A common feature of the neuropsychiatric disorders for which antipsychotic drugs are prescribed is cognitive dysfunction, yet the effects of long-term antipsychotic treatment on cognition are largely unknown. In the current study, we evaluated the effects of long-term oral treatment with the first-generation antipsychotic haloperidol (1.0 and 2.0 mg/kg daily) and the second-generation antipsychotic risperidone (1.25 and 2.5 mg/kg daily) on the acquisition and performance of two radial-arm maze (RAM) tasks and a five-choice serial reaction-time task (5C-SRTT) in rats during days 15-60 and 84-320 days of treatment, respectively. In the RAM, neither antipsychotic significantly affected the acquisition or performance of a spatial win shift or a delayed non-match-to-position task. Conversely, in the rats administered 5C-SRTT, haloperidol was associated with profound deficits in performance, and the subjects were not able to progress through all stages of task acquisition. Depending on the dose, risperidone was associated with a greater number of trials to meet specific performance criteria during task acquisition compared with vehicle-treated controls; however, most subjects were eventually able to achieve all levels of task acquisition. Both haloperidol and risperidone also increased the number of perseverative and time-out responses during certain stages of task acquisition, and the response and reward latencies were slightly higher than controls during several stages of the study. These results in rats suggest that while long-term treatment with haloperidol or risperidone may not significantly affect spatial working or short-term memory, both antipsychotics can (depending on dose) impair sustained attention, decrease psychomotor speed, increase compulsive-type behaviors, and impair cognitive flexibility.

  17. Risperidone-related reversal of primary enuresis: an unusual case report.

    Science.gov (United States)

    Mendhekar, D N; Andrade, C

    2010-03-01

    Occasional reports have documented treatment-emergent enuresis with medication regimens that include risperidone. In contrast to these reports, we present a 12-year-old girl with mild mental retardation and primary nocturnal enuresis who received risperidone (0.5 mg/day) for the isolated symptom of inappropriate smiling. Surprisingly, in addition to reduction in inappropriate smiling, risperidone also substantially decreased the frequency of enuresis. These benefits with risperidone were confirmed in an on-off-on treatment sequence. To our knowledge, this is the first case in literature of primary enuresis responding to low-dose risperidone. Low-dose risperidone may merit study in children with enuresis. Clinical implications and possible mechanisms are discussed.

  18. Postmortem Femoral Blood Concentrations of Risperidone

    DEFF Research Database (Denmark)

    Linnet, Kristian; Johansen, Sys Stybe

    2014-01-01

    Postmortem femoral blood concentrations of the antipsychotic drug risperidone and the active metabolite 9-hydroxyrisperidone were determined by an achiral LC-MS/MS method in 38 cases. The cause of death was classified as unrelated to risperidone in 30 cases, in which the sum of the concentration ...

  19. Risperidone-induced enuresis in two children with autistic disorder.

    Science.gov (United States)

    Hergüner, Sabri; Mukaddes, Nahit Motavalli

    2007-08-01

    Risperidone appears to be effective in treating behavioral problems in children with autistic disorder. Although increased appetite, weight gain, and sedation are among the most common side effects, risperidone-induced enuresis is rarely reported. We will present two cases with risperidone-induced enuresis, and discuss our findings in the context of current literature. Two children aged 11 and 10 years, diagnosed with autism and mental retardation, have developed new-onset diurnal and nocturnal enuresis respectively on their first and second weeks of risperidone monotherapy (1.5 and 1 mg/day). They did not experience sedation, and their medical history and workup were unremarkable. As enuresis did not resolve spontaneously, we decided to substitute risperidone with olanzapine. Enuresis ceased rapidly after discontinuation of risperidone with no emergence when patients were treated with olanzapine 5 mg/day for a period of 6 months and 1 year, respectively. Although the pathophysiology of antipsychotic-induced enuresis remains unclear, a number of mechanisms including alpha(1)-adrenergic blockade, dopamine blockade, and antimuscarinic effects has been proposed. Olanzapine has lower alpha(1)-adrenergic and dopaminergic blockade properties, thus changing risperidone to olanzapine may be an alternative modality in risperidone-induced enuresis when antipsychotic treatment is crucial. Clinicians should be more vigilant about screening for this side effect, especially in younger population with developmental disabilities.

  20. Adjunctive treatment with aripiprazole for risperidone-induced hyperprolactinemia

    Directory of Open Access Journals (Sweden)

    Ranjbar F

    2015-03-01

    Full Text Available Fatemeh Ranjbar,1 Homayoun Sadeghi-Bazargani,2,3 Parisa Niari Khams,1 Asghar Arfaie,1 Azim Salari,4 Mostafa Farahbakhsh1 1Clinical Psychiatry Research Center, Tabriz University of Medical Sciences, Tabriz, East Azerbaijan, Iran; 2Road Traffic Injury Research Center, Department of Statistics & Epidemiology, Tabriz University of Medical Sciences, Tabriz, Iran; 3World Health Organization Collaborating Center on Community Safety Promotion, Karolinska Institute, Stockholm, Sweden; 4Emam Khomeini Hospital, Naghadeh, West Azerbaijan, Iran Background: Antipsychotics have been used for more than 50 years in the treatment of schizophrenia and many other psychiatric disorders. Prolactin levels usually increase in patients treated with risperidone. Aripiprazole, which has a unique effect as an antipsychotic, is a D2 receptor partial agonist. It is an atypical antipsychotic with limited extrapyramidal symptoms. Since it acts as an antagonist in hyperdopaminergic conditions and as an agonist in hypodopaminergic conditions, it does not have adverse effects on serum prolactin levels. The present study aimed to investigate the effect of aripiprazole on risperidone-induced hyperprolactinemia. Methods: This before-and-after clinical trial was performed in 30 patients. Baseline prolactin levels were measured in all patients who were candidates for treatment with risperidone. In subjects with elevated serum prolactin, aripiprazole was added to their treatment. Serum prolactin levels were measured during the first week, second week, and monthly thereafter for at least 3 months or until prolactin levels became normal. The data were analyzed using Stata version 11 software. Survival analysis and McNemar’s test were also performed. Results: The mean age of the participants was 30.8 years. Prolactin levels normalized in 23 (77% participants during the study, and menstrual disturbances normalized in 25 (83.3%. Prolactin levels normalized in most patients between days 50

  1. [Atypical antipsychotics and sexual dysfunction: five case-reports associated with risperidone].

    Science.gov (United States)

    Haefliger, T; Bonsack, C

    2006-01-01

    Sexual and reproductive function side effects of atypical antipsychotics are frequent, often underestimated and badly tolerated. They contribute to the 50% rate of non-compliance reported for treated patients. Prevalence of sexual dysfunction associated with atypical antipsychotic treatment is high, varying from 18 to 96%. Atypical antipsychotics aren't, as a group, much better than typical antipsychotics, and among them, risperidone seems to induce more and quetiapine less sexual dysfunction. Most atypicals are non-selective, and have actions on multiple central and peripheral receptors. Among these, dopaminergic blockade could have a direct - altering motivation (desire) and reward (orgasm) - and an indirect negative influence on sexuality. Actually, the secondary hyperprolactinemia induced by some antipsychotics (typical antipsychotics, risperidone and amisulpiride), is dose-dependent, more pronounced for female patients, and may have a detrimental effect on sexual function. It also may result in hypogonadism, particularly for female patients. The long-term consequences of this secondary hypogonadism are subject to debate but potentially severe. Furthermore, the blocking and/or modulating actions of atypical antipsychotics on adrenaline, serotonine, histamine or acetyl-choline receptors all have the potential to contribute to secondary sexual problems. The pharmacological profile of risperidone, characterized by a strong affinity for D2 and alpha1 receptors, correlates with his tendency to significantly elevate prolactin levels and to produce ejaculatory disturbances. FIVE CASE-REPORTS: We describe five case-reports of sexual or hormonal disturbances associated with risperidone treatment: two cases of ejaculatory disturbance, one case of galactorrhea and two cases of amenorrhea. Alberto and David are two young male schizophrenic patients, treated with risperidone, and complaining of a total absence of ejaculation despite a preserved orgasm. Many recent case

  2. Triiodothyronine accelerates and enhances the antipsychotic effect of risperidone in acute schizophrenia.

    Science.gov (United States)

    Steibliene, Vesta; Bunevicius, Adomas; Savickas, Arunas; Prange, Arthur J; Nemeroff, Charles B; Bunevicius, Robertas

    2016-02-01

    In acute psychotic schizophrenia patients we investigated if the combination of triiodothyronine (T3) plus risperidone was more effective when compared to risperidone monotherapy. Thirty-two in-patients meeting the DSM-IV-TR diagnostic criteria for schizophrenia and without thyroid disease received risperidone (flexibly adjusted dose for tolerability) and were randomized to additionally receive either T3 (25 μg daily; risperidone plus T3 group) or placebo (risperidone plus placebo group). Treatment lasted until meeting the response to treatment criteria defined as score of ≤ 3 on the Clinical Global Impression Severity and Improvement scales. Acute psychotic episode symptom severity was evaluated using the Brief Psychiatric Rating Scale (BPRS) at treatment initiation and at the final study assessment. Fourteen patients were randomized to receive risperidone plus T3 and eighteen to receive risperidone plus placebo. The time until treatment response was shorter in the risperidone plus T3 group relative to the risperidone plus placebo group (25.5 ± 4.4 days vs 32.2 ± 8.2 days, respectively; p = 0.001). Moreover, there was a greater reduction of BPRS-total score (p = 0.01) in the risperidone plus T3 group relative to the risperidone plus placebo group. Treatment with T3 was associated with shorter time to treatment response (β = -0.440, p = 0.022) and with greater improvement in BPRS score (β = 0.240, p = 0.053), independent of patients' gender, age, baseline BPRS score and mean risperidone dose. The study confirms that addition of T3 to risperidone was associated with accelerated and enhanced treatment response in acutely psychotic schizophrenic patients. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Comparison of Risperidone and Olanzapine in Bipolar and Schizoaffective Disorders

    Science.gov (United States)

    Masand, Prakash S.; Wang, Xiaohong; Gupta, Sanjay; Schwartz, Thomas L.; Virk, Subhdeep; Hameed, Ahmad

    2002-01-01

    Objective: To compare risperidone and olanzapine for efficacy, tolerability, need for concomitant mood stabilizers, and cost of treatment in bipolar and schizoaffective disorders. Method: We conducted a retrospective chart review of 36 consecutive outpatients with DSM-IV bipolar or schizoaffective disorder seen in 3 settings who received risperidone or olanzapine for at least 1 month between May and August 1997. Results: The mean ± SD doses were 3.7 ± 3.5 mg/day of risperidone and 12.0 ± 5.4 mg/day of olanzapine. Between-treatment differences in patient characteristics, psychiatric history, Clinical Global Impressions scale ratings, and duration of treatment were not significant. Similar proportions of patients in the 2 groups reported side effects, including extrapyramidal symptoms, akathisia, tardive dyskinesia, and precipitation of mania by the respective drug. Patients in the olanzapine group received a significantly higher dose of concomitant lithium than those receiving risperidone (mean daily lithium doses: risperidone group, 750 ± 150 mg; olanzapine group, 1211 ± 186 mg; p = .006). The total daily acquisition cost per patient was $11.84 for olanzapine versus $5.81 for risperidone. Conclusion: Olanzapine and risperidone were equally efficacious and safe in the treatment of patients with bipolar or schizoaffective disorder, but treatment costs and dose of concomitant lithium were lower in risperidone-treated patients. PMID:15014747

  4. Risperidone treatment increases CB1 receptor binding in rat brain

    DEFF Research Database (Denmark)

    Secher, Anna; Husum, Henriette; Holst, Birgitte

    2010-01-01

    , the ghrelin receptor, neuropeptide Y, adiponectin and proopiomelanocortin. We investigated whether the expression of these factors was affected in rats chronically treated with the antipsychotic risperidone. METHODS: Male Sprague-Dawley rats were treated with risperidone (1.0 mg/kg/day) or vehicle (20...... showed that risperidone treatment altered CB(1) receptor binding in the rat brain. Risperidone-induced adiposity and metabolic dysfunction in the clinic may be explained by increased CB(1) receptor density in brain regions involved in appetite and regulation of metabolic function....

  5. P-glycoprotein interaction with risperidone and 9-OH-risperidone studied in vitro, in knock-out mice and in drug-drug interaction experiments

    DEFF Research Database (Denmark)

    Ejsing, Thomas B.; Pedersen, Anne D.; Linnet, Kristian

    2005-01-01

    P-glycoprotein, risperidone, nortriptyline, cyclosporine A, drug-drug interaction, blood-brain barrier, knock-out mice......P-glycoprotein, risperidone, nortriptyline, cyclosporine A, drug-drug interaction, blood-brain barrier, knock-out mice...

  6. Risperidone-induced enuresis in a 12-year-old child

    Directory of Open Access Journals (Sweden)

    Reetika Dikshit

    2017-01-01

    Full Text Available Risperidone has been documented to be effective in the management of behavior problems, aggression, and conduct disorder in children. While metabolic side effects like weight gain and obesity have been attributed to Risperidone use in children, side effects of the drug related to the urinary bladder are rare. We present a case of Risperidone-induced enuresis in a 12-year-old boy with conduct disorder that resolved completely after stopping the medication.

  7. Treatment of delirium with risperidone in cancer patients.

    Science.gov (United States)

    Kishi, Yasuhiro; Kato, Masashi; Okuyama, Toru; Thurber, Steven

    2012-08-01

    Antipsychotic medications have frequently been regarded as the treatment of choice for delirium. This study examined the clinical efficacy of risperidone for the treatment of delirium in cancer patients, combined with a repeated assessment of underlying medical severity levels. The study included consecutive referrals of 29 delirious cancer patients (mean age, 68.9 ± 12.5 years; male, 69%) to the psychiatric consultation service. Risperidone was given orally once per day (mean dosage, 1.4 ± 1.3 mg/day). Study participants were assessed using quantitative standardized scales of cognitive function, delirium, and physical impairment at baseline and at the end of the study (seventh day). Risperidone with routine clinical management was effective for the treatment of delirium: 48% of the patients responded and 38% achieved remission. The reduction of delirium severity occurred in 79% of the patients. Changes in delirium severity were unrelated to age, gender, general cognitive dysfunction, or to severity of attendant medical conditions. In addition to changes in agitation and perceptional disturbances, risperidone was also effective for other specific delirium symptoms. Risperidone with routine clinical management is effective in the treatment of delirium in advanced cancer patients, independent of changes in the underlying medical condition. © 2012 The Authors. Psychiatry and Clinical Neurosciences © 2012 Japanese Society of Psychiatry and Neurology.

  8. Long-term conversion of 45S5 bioactive glass-ceramic microspheres in aqueous phosphate solution.

    Science.gov (United States)

    Fu, Hailuo; Rahaman, Mohamed N; Day, Delbert E; Huang, Wenhai

    2012-05-01

    The conversion of 45S5 glass and glass-ceramics to a hydroxyapatite (HA)-like material in vitro has been studied extensively, but only for short reaction times (typically glass-ceramic microspheres (designated 45S5c) in an aqueous phosphate solution. Microspheres of 45S5c (75-150 μm) were immersed for 10 years at room temperature (~25 °C) in K(2)HPO(4) solution with a concentration of 0.01 M or 1.0 M, and with a starting pH of 7.0 or 9.5. The reacted 45S5c microspheres and solutions were analyzed using structural and analytical techniques. Only 25-45 vol% of the 45S5c microspheres were converted to an HA-like material after the 10 year reaction. In solutions with a starting pH of 9.5, an increase in the K(2)HPO(4) concentration from 0.01 to 1.0 M resulted in a doubling of the volume of the microspheres converted to an HA-like material but had little effect on the composition of the HA-like product. In comparison, reaction of the 45S5c microspheres in the solution with a starting pH of 7.0 resulted in an HA-like product in the 0.01 M K(2)HPO(4) solution but a calcium pyrophosphate product, Ca(10)K(4)(P(2)O(7))(6).9H(2)O, in the 1.0 M solution. The consequences of these results for the long-term use of 45S5 glass-ceramics in biomedical applications are discussed.

  9. Risperidone and Risk of Gynecomastia in Young Men.

    Science.gov (United States)

    Etminan, Mahyar; Carleton, Bruce; Brophy, James M

    2015-11-01

    The purpose of this study was to quantify the risk of gynecomastia with risperidone in adolescent and young adult males. We created a cohort of males 15-25 years of age from the IMS LifeLink database, and conducted a case-control study within the cohort by identifying all new cases of gynecomastia. For each case, 10 controls were selected and matched to the cases by age, follow-up, and calendar times (cases and controls had the same follow up time and cohort entry date). Rate ratios (RR) for current use of risperidone were computed adjusting for potential confounding variables. First diagnosis of gynecomastia was made based on International Classification of Diseases, 9th revision (ICD-9) for gynecomastia. There were 401,924 males ages 15-25 in the primary cohort. There were 1556 cases of gynecomastia and 15,560 corresponding controls. Current users of risperidone had approximately four times the risk of developing gynecomastia than non-users (RR=3.91, 95% CI=2.01-7.62). When the analysis was stratified to children and adolescents (≤18 years of age) taking risperidone, the risk of gynecomastia was five times higher than for non-users (RR=5.44, 95% CI=1.50-19.74). Risperidone is associated with an increase with the risk of gynecomastia in adolescent and young adult males.

  10. Impact of risperidone on leptin and insulin in children and adolescents with autistic spectrum disorders.

    Science.gov (United States)

    Srisawasdi, Pornpen; Vanwong, Natchaya; Hongkaew, Yaowaluck; Puangpetch, Apichaya; Vanavanan, Somlak; Intachak, Boontarika; Ngamsamut, Nattawat; Limsila, Penkhae; Sukasem, Chonlaphat; Kroll, Martin H

    2017-08-01

    To evaluate the influence of dose and duration of risperidone treatment on cardiovascular and diabetes risk biomarkers in children and adolescents with autistic spectrum disorders (ASDs). In this cross-sectional analysis, a total of 168 ASDs patients (89% male) treated with a risperidone-based regimen for ≥12months were included. Blood samples were analyzed for glucose and lipid metabolic markers, adiponectin, leptin, prolactin, cortisol and high sensitive C-reactive protein. The mean concentrations of glucose, insulin, prolactin and leptin and HOMA-IR significantly rose with risperidone dosage (all P<0.025), but those of adiponectin and cortisol did not. Using regression analysis, insulin, leptin, prolactin and glucose concentrations and HOMA-IR show significant association with dosage. None of the markers except adiponectin showed dependence on duration of treatment. However, insulin and leptin concentrations and HOMA-IR clearly increased with increasing both dosage and duration. Dosage and duration of treatment had minimal effect on standard lipid profile and lipoprotein subclasses. Risperidone treatment disturbed glucose homeostasis and endocrine regulation (particularly leptin) in children and adolescents with ASDs, in a dose- and duration-dependent manner, being suggestive of leptin and insulin resistance mechanisms. Metabolic adverse effects, especially development of type 2 diabetes mellitus should be closely monitored, particularly in individuals receiving high doses and/or long-term risperidone treatment. Copyright © 2017 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

  11. Risperidone-associated urinary incontinence in patients with autistic disorder with mental retardation.

    Science.gov (United States)

    Kumazaki, Hirokazu; Watanabe, Koichiro; Imasaka, Yasushi; Iwata, Kazuhiko; Tomoda, Akemi; Mimura, Masaru

    2014-10-01

    We report several cases in which patients with autistic disorder with mental retardation who received risperidone experienced urinary incontinence. We retrospectively investigated the medical records of patients housed in facilities for patients with autistic disorder with mental retardation. Those who had undergone a medical examination at a hospital in Tokyo from April 1999 to March 2009 were included in the study.Retrospective data were gathered including age, sex, IQ, birth weight, dosage of risperidone, urinary density, as well as existence of urinary and fecal incontinence. We divided the participants into those who did and did not experience urinary incontinence after taking risperidone and compared the 2 groups. Risperidone had been prescribed to 35 patients. In spite of the fact that no patient had a history of urinary incontinence, 14 patients experienced urinary incontinence after receiving risperidone. Moreover, 4 of these 14 patients also had fecal incontinence. Among the variables we examined, the only significant difference between groups was in sex, with significantly more women experiencing incontinence compared with men. When the dose of risperidone was reduced or the patients switched to other drugs, urinary incontinence of the patients improved.Hence, risperidone may have a casual relationship with urinary incontinence. Further research is needed to understand the pathophysiology of possible effect.

  12. Hyperprolactinemia in Thai children and adolescents with autism spectrum disorder treated with risperidone

    Directory of Open Access Journals (Sweden)

    Hongkaew Y

    2015-01-01

    Full Text Available Yaowaluck Hongkaew,1,2 Nattawat Ngamsamut,3 Apichaya Puangpetch,1,2 Natchaya Vanwong,1,2 Pornpen Srisawasdi,4 Montri Chamnanphon,1,2 Bhunnada Chamkrachchangpada,3 Teerarat Tan-kam,3 Penkhae Limsila,3 Chonlaphat Sukasem1,2 1Division of Pharmacogenomics and Personalized Medicine, Department of Pathology, Faculty of Medicine, 2Laboratory for Pharmacogenomics, Somdech Phra Debaratana Medical Center (SDMC, Ramathibodi Hospital, Mahidol University, 3Yuwaprasart Waithayopathum Child and Adolescent Psychiatric Hospital, Department of Mental Health Services, Ministry of Public Health, 4Division of Clinical Chemistry, Department of Pathology, Faculty of Medicine, Ramathibodi Hospital, Mahidol University, Bangkok, Thailand Abstract: Hyperprolactinemia is a common adverse effect observed in children with autism spectrum disorder (ASD during pharmacotherapy with risperidone. The main aim of this study was to investigate important clinical factors influencing the prolactin response in risperidone-treated Thai ASD. A total of 147 children and adolescents (127 males and 20 females aged 3–19 years with ASD received risperidone treatment (0.10–6.00 mg/day for up to 158 weeks. Prolactin levels were measured by chemiluminescence immunoassay. The clinical data of patients collected from medical records – age, weight, height, body mass index, dose of risperidone, duration of treatment, and drug-use pattern – were recorded. Hyperprolactinemia was observed in 66 of 147 (44.90% subjects. Median prolactin level at the high doses (24.00, interquartile range [IQR] 14.30–29.20 of risperidone was significantly found to be higher than at the recommended (16.20, IQR 10.65–22.30 and low (11.70, IQR 7.51–16.50 doses of risperidone. There was no relationship between prolactin levels and duration of risperidone treatment. Dose-dependence is identified as a main factor associated with hyperprolactinemia in Thai children and adolescents with ASD treated with

  13. Evidence based administration of risperidone and paliperidone for the treating conduct disorder

    Directory of Open Access Journals (Sweden)

    Ahmad Ghanizadeh

    2013-01-01

    Full Text Available Background: This study evaluates the evidence-based administration of risperidone and paliperidone for the treating children and adolescents with conduct disorder (CD. Materials and Methods: A review of the current literature from clinical trials that investigated the efficacy of risperidone and paliperidone on CD considering the inclusion criteria and search strategies was performed by a search of PubMed and Google Scholar databases. Results: Out of 53 titles, 31 were irrelevant. The abstract of 22 potentially related articles were studied. Only six articles reported the results of clinical trial. However, one of them reported the effect of risperidone on conduct behaviors in autistic disorders. One study was a re-analysis of two previous studies, one study reported the effects of maintenance versus withdrawal of risperidone treatment and two studies included children with sub-average intelligence. Headache, somnolence and increased appetite are among the most common reported adverse effects. No study examined the effect of paliperidone on CD was found. Conclusion: Current literature suggests that risperidone could be effective for treating some conduct behaviors in children and adolescents. The effect of risperidone on CD is not a well-researched area. There is no well-controlled evidence based reports about the safety and efficacy of risperidone for the treatment of CD. Further trials should examine the efficacy of these medications on CD rather than conduct behaviors or disruptive behavior disorders.

  14. Characterization of unsaturated fatty acid sustained-release microspheres for long-term algal inhibition.

    Science.gov (United States)

    Ni, Lixiao; Jie, Xiaoting; Wang, Peifang; Li, Shiyin; Hu, Shuzhen; Li, Yiping; Li, Yong; Acharya, Kumud

    2015-02-01

    The unsaturated fatty acid (linoleic acid) sustained-release microspheres were prepared with linoleic acid (LA) using alginate-chitosan microcapsule technology. These LA sustained-release microspheres had a high encapsulation efficiency (up to 62%) tested by high performance liquid chromatography with a photo diode array. The dry microspheres were characterized by a scanning electron microscope, X-ray diffraction measurement, dynamic thermogravimetric analysis and Fourier transform infrared spectral analysis. The results of characterization showed that the microspheres had good thermal stability (decomposition temperature of 236°C), stable and temperature independent release properties (release time of more than 40 d). Compared to direct dosing of LA, LA sustained-released microspheres could inhibit Microcystis aeruginosa growth to the non-growth state. The results of this study suggested that the LA sustained-release microspheres may be a potential candidate for algal inhibition. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Peripheral Edema Occurring during Treatment with Risperidone Combined with Citalopram

    Directory of Open Access Journals (Sweden)

    Seyed Hamzeh Hosseini

    2012-01-01

    Full Text Available An 80-year-old female presented with symptoms of depression, worthlessness, hopelessness, loss of energy, insomnia, impatience, and forgetfulness associated with persecutory delusion that had begun about one year before her visit. She was diagnosed with major depression with psychotic signs and began treatment with risperidone (2 mg/night and citalopram (20 mg/day. After 20 days, she returned and reported partial improvement in her symptoms, although she had developed severe swelling of the hands and feet. The results of liver and renal function tests and rheumatologic tests were found to be within normal limits. Risperidone was discontinued for a week, and the swelling resolved completely. Risperidone was then administered again, and the swelling returned so that the patient had to discontinue taking the drug. The reappearance of edema on rechallenge is strong evidence implicating risperidone as the cause of the swelling.

  16. Moderators, mediators, and other predictors of risperidone response in children with autistic disorder and irritability.

    Science.gov (United States)

    Arnold, L Eugene; Farmer, Cristan; Kraemer, Helena Chmura; Davies, Mark; Witwer, Andrea; Chuang, Shirley; DiSilvestro, Robert; McDougle, Christopher J; McCracken, James; Vitiello, Benedetto; Aman, Michael G; Scahill, Lawrence; Posey, David J; Swiezy, Naomi B

    2010-04-01

    The National Institute of Mental Health (NIMH) Research Units on Pediatric Psychopharmacology (RUPP) Autism Network found an effect size of d = 1.2 in favor of risperidone on the main outcome measure in an 8-week double-blind, placebo-controlled trial for irritability in autistic disorder. This paper explores moderators and mediators of this effect. Intention-to-treat (ITT) analyses were conducted with suspected moderators and mediators entered into the regression equations. MacArthur Foundation Network subgroup guidelines were followed in the evaluation of the results. Only baseline severity moderated treatment response: Higher severity showed greater improvement for risperidone but not for placebo. Weight gain mediated treatment response negatively: those who gained more weight improved less with risperidone and more with placebo. Compliance correlated with outcome for risperidone but not placebo. Higher dose correlated with worse outcome for placebo, but not risperidone. Of nonspecific predictors, parent education, family income, and low baseline prolactin positively predicted outcome; anxiety, bipolar symptoms, oppositional-defiant symptoms, stereotypy, and hyperactivity negatively predicted outcome. Risperidone moderated the effect of change in 5'-nucleotidase, a marker of zinc status, for which decrease was associated with improvement only with risperidone, not with placebo. The benefit-risk ratio of risperidone is better with greater symptom severity. Risperidone can be individually titrated to optimal dosage for excellent response in the majority of children. Weight gain is not necessary for risperidone benefit and may even detract from it. Socioeconomic advantage, low prolactin, and absence of co-morbid problems nonspecifically predict better outcome. Mineral interactions with risperidone deserve further study.

  17. CYP2D6 polymorphisms and their influence on risperidone treatment

    Directory of Open Access Journals (Sweden)

    Puangpetch A

    2016-12-01

    Full Text Available Apichaya Puangpetch,1 Natchaya Vanwong,1 Nopphadol Nuntamool,2 Yaowaluck Hongkaew,1 Monpat Chamnanphon,1 Chonlaphat Sukasem1 1Division of Pharmacogenomics and Personalized Medicine, Department of Pathology, Faculty of Medicine Ramathibodi Hospital, 2Molecular Medicine, Faculty of Science, Mahidol University, Bangkok, Thailand Abstract: Cytochrome P450 enzyme especially CYP2D6 plays a major role in biotransformation. The interindividual variations of treatment response and toxicity are influenced by the polymorphisms of this enzyme. This review emphasizes the effect of CYP2D6 polymorphisms in risperidone treatment in terms of basic knowledge, pharmacogenetics, effectiveness, adverse events, and clinical practice. Although the previous studies showed different results, the effective responses in risperidone treatment depend on the CYP2D6 polymorphisms. Several studies suggested that CYP2D6 polymorphisms were associated with plasma concentration of risperidone, 9-hydroxyrisperidone, and active moiety but did not impact on clinical outcomes. In addition, CYP2D6 poor metabolizer showed more serious adverse events such as weight gain and prolactin than other predicted phenotype groups. The knowledge of pharmacogenomics of CYP2D6 in risperidone treatment is increasing, and it can be used for the development of personalized medication in term of genetic-based dose recommendation. Moreover, the effects of many factors in risperidone treatment are still being investigated. Both the CYP2D6 genotyping and therapeutic drug monitoring are the important steps to complement the genetic-based risperidone treatment. Keywords: CYP2D6, risperidone, polymorphisms, adverse drug reaction, pharmacogenetics, pharmacokinetics, pharmacodynamics

  18. A Comparative Study between Olanzapine and Risperidone in the Management of Schizophrenia

    Directory of Open Access Journals (Sweden)

    Saeed Shoja Shafti

    2014-01-01

    Full Text Available Introduction. Since a variety of comparisons between risperidone and olanzapine have resulted in diverse outcomes, so safety and efficacy of them were compared again in a new trial. Method. Sixty female schizophrenic patients entered into one of the assigned groups for random allocation to olanzapine or risperidone (n=30 in each group in a double-blind, 12-week clinical trial. Scale for Assessment of Positive Symptoms (SAPS and Scale for Assessment of Negative Symptoms (SANS were used as the primary outcome measures. Clinical Global Impressions-Severity Scale (CGI-S, Schedule for Assessment of Insight (SAI, and finally Simpson Angus Scale (SAS as well were employed as secondary scales. Results. While both of olanzapine and risperidone were significantly effective for improvement of positive symptoms (P<0.0001, as regards negative symptoms, it was so only by means of olanzapine (P<0.0003. CGI-S and SAI, as well, were significantly improved in both of the groups. SAS increment was significant only in the risperidone group (P<0.02. Conclusion. While both of olanzapine and risperidone were equally effective for improvement of positive symptoms and insight, olanzapine showed superior efficacy with respect to negative symptoms, along with lesser extrapyramidal side effects, in comparison with risperidone.

  19. Making the leap from daily oral dosing to long-acting injectables: lessons from the antipsychotics.

    Science.gov (United States)

    Remenar, Julius F

    2014-06-02

    There are now long-acting versions of six antipsychotic drugs on the U.S. market, and with them, five unique combinations of molecular form and delivery strategy long-acting-injectable-antipsychotics (LAIAs) show evidence of reduced relapses of schizophrenia, but their introduction has been slow, taking at least nine years after the approval of each oral drug. Oily solutions of lipophilic prodrugs were the first to enter the LAIA market, but they relied on esterification of a hydroxyl handle that was lost with the emergence of the atypical antipsychotics. A review of the literature and patents shows that companies tested many different approaches before reaching the currently marketed versions, including aqueous suspensions of poorly soluble salts, polymeric microspheres, and new approaches to making prodrugs. Yet, very little has been published to support faster development of safe long-acting injectables (LAIs). This review introduces some of the critical considerations in creating an LAI; then it analyzes the existing products and discusses areas where further research is needed. The available literature suggests that lipophilic prodrugs may be inherently safer than poorly soluble salts as LAIs. Other areas needing additional study include (1) the range of physical properties acceptable for LAIs and the effect of prodrug tail length in achieving them, and (2) the role of physiological responses at the injection site in the release of drug from a depot.

  20. Focus on risperidone.

    Science.gov (United States)

    Green, B

    2000-01-01

    Risperidone is a relatively new antipsychotic available world-wide since the early 1990s. It has been characterised as atypical, but shares some of the extrapyramidal side-effect profile of the earlier antipsychotics, when used at doses higher than those recommended by the manufacturer (4-6 mg/day). There is now adequate comparison with conventional antipsychotics to suggest its superiority, but a depot formulation is needed to complete the picture.

  1. Accelerated in vitro release testing method for naltrexone loaded PLGA microspheres.

    Science.gov (United States)

    Andhariya, Janki V; Choi, Stephanie; Wang, Yan; Zou, Yuan; Burgess, Diane J; Shen, Jie

    2017-03-30

    The objective of the present study was to develop a discriminatory and reproducible accelerated release testing method for naltrexone loaded parenteral polymeric microspheres. The commercially available naltrexone microsphere product (Vivitrol ® ) was used as the testing formulation in the in vitro release method development, and both sample-and-separate and USP apparatus 4 methods were investigated. Following an in vitro drug stability study, frequent media replacement and addition of anti-oxidant in the release medium were used to prevent degradation of naltrexone during release testing at "real-time" (37°C) and "accelerated" (45°C), respectively. The USP apparatus 4 method was more reproducible than the sample-and-separate method. In addition, the accelerated release profile obtained using USP apparatus 4 had a shortened release duration (within seven days), and good correlation with the "real-time" release profile. Lastly, the discriminatory ability of the developed accelerated release method was assessed using compositionally equivalent naltrexone microspheres with different release characteristics. The developed accelerated USP apparatus 4 release method was able to detect differences in the release characteristics of the prepared naltrexone microspheres. Moreover, a linear correlation was observed between the "real-time" and accelerated release profiles of all the formulations investigated, suggesting that the release mechanism(s) may be similar under both conditions. These results indicate that the developed accelerated USP apparatus 4 method has the potential to be an appropriate fast quality control tool for long-acting naltrexone PLGA microspheres. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Zinc salt enhances gastroprotective activity of risperidone in indomethacin-induced gastric ulcer.

    Science.gov (United States)

    Oluwole, F S; Onwuchekwa, C

    2016-09-01

    Zinc has been reported to mediate cellular responses to injury by producing cytoprotection via the scavenging of reactive oxygen species. Anti-stress medications are generally anti-psychotic drugs and anti- depressants. Some Anti-psychotic drugs such as risperidone have been reported to possess anti-ulcer activity. Risperidone as an antipsychotic drug blocks several neurotransmitter systems including dopaminergic, adrenergic, histaminergic and serotonergic pathways. The study investigated the antiulcer activity of Zinc Chloride (ZnCl(2)) in combination with risperidone in male Wistar rats. The animals were divided into two groups of twenty animals each for ZnCl(2) and risperidone groups. Each group was further divided into four subgroups. ZnCl(2) was administered orally at 20mg/kg, 40mg/kg and 80mg/kg to a subgroup, while 80mg/kg of ZnCl(2) was administered in combination with risperidone (0.1mg/kg, 0.3mg/kg and 0.5mg/kg) orally once daily for 21 days. The controls were treated with distilled water. Ulcer was induced using indomethacin. Histology of the stomach tissues was prepared with PAS and H& E stains. Ulcer score and ulcer area were assessed using standard methods. Data were analysed using student t-test and Graphpad Prism 5. There were decreases in ulcer scores using the different doses of ZnCl, (20mg/kg, 40mg/kg and 80mg/kg). Also using the highest dose ZnCl(2) (80mg/ kg) and different doses of risperidone there were decreases in ulcer scores compared to the control. This effect of the risperidone showed a significant dose- dependent reduction. The effect ZnCl(2), and risperidone were also reflected in the ulcer area and in the histology. These findings suggest that ZnCl(2), enhances the gastroprotective activity ofrisperidone in indomethacin- induced gastric ulcer. However, more detailed studies are necessary to confirm the relevance of this finding and its implications in clinical settings.

  3. Risperidone versus other atypical antipsychotics for schizophrenia

    Science.gov (United States)

    Komossa, Katja; Rummel-Kluge, Christine; Schwarz, Sandra; Schmid, Franziska; Hunger, Heike; Kissling, Werner; Leucht, Stefan

    2014-01-01

    Background In many countries of the industrialised world second-generation (“atypical”) antipsychotics (SGAs) have become the first line drug treatment for people with schizophrenia. The question as to whether and if so how much the effects of the various SGAs differ is a matter of debate. In this review we examined how the efficacy and tolerability of risperidone differs from that of other SGAs. Objectives To evaluate the effects of risperidone compared with other atypical antipsychotics for people with schizophrenia and schizophrenia-like psychosis. Search methods 1. Electronic searching We searched the Cochrane Schizophrenia Group Trials Register (April 2007) which is based on regular searches of BIOSIS, CENTRAL, CINAHL, EMBASE, MEDLINE and PsycINFO. 2. Reference searching We inspected the references of all identified studies for more trials. 3. Personal contact We contacted the first author of each included study for missing information. 4. Drug companies We contacted the manufacturers of all atypical antipsychotics included for additional data. Selection criteria We included all randomised, blinded trials comparing oral risperidone with oral forms of amisulpride, aripiprazole, clozapine, olanzapine, quetiapine, sertindole, ziprasidone or zotepine in people with schizophrenia or schizophrenia-like psychosis. Data collection and analysis We extracted data independently. For dichotomous data we calculated risk ratio (RR) and their 95% confidence intervals (CI) on an intention-to-treat basis based on a random-effects model. We calculated numbers needed to treat/harm (NNT/NNH) where appropriate. For continuous data, we calculated mean differences (MD), again based on a random-effects model. Main results The review currently includes 45 blinded RCTs with 7760 participants. The number of RCTs available for each comparison varied: four studies compared risperidone with amisulpride, two with aripiprazole, 11 with clozapine, 23 with olanzapine, eleven with

  4. Risperidone in psychotic combat-related posttraumatic stress disorder: an open trial.

    Science.gov (United States)

    Kozarić-Kovacić, Dragica; Pivac, Nela; Mück-Seler, Dorotea; Rothbaum, Barbara Olasov

    2005-07-01

    Psychotic symptoms that frequently occur in combat-related posttraumatic stress disorder (PTSD) complicate its pharmacotherapy. We hypothesized that war veterans with psychotic PTSD, resistant to prior antidepressant treatment, would respond well to 6 weeks of treatment with the atypical antipsychotic risperidone, given as a monotherapy. Twenty-six male war veterans with psychotic PTSD (DSM-IV) completed the 6-week inpatient treatment with risperidone (2-4 mg/day) during the period from November 1999 through December 2002. The primary outcome measure was change from baseline to endpoint (6 weeks) in Positive and Negative Syndrome Scale (PANSS) total and subscale scores. Secondary outcome measures were changes in PTSD Interview (PTSD-I) and Clinical Global Impressions-Severity of Illness scale (CGI-S) total and subscale scores. Clinical improvement was assessed by CGI-S, CGI-Improvement scale, and Patient Global Impression of Improvement scale, while adverse events were recorded by Drug-Induced Extrapyramidal Symptoms Scale. Treatment with risperidone for either 3 or 6 weeks in an open trial significantly reduced total and subscales scores on the PANSS and on the PTSD-I and CGI-S when compared to baseline scores in patients with psychotic PTSD. Our preliminary data from the open trial indicate that risperidone decreased most of the psychotic and PTSD symptoms. Psychotic PTSD patients, unresponsive to antidepressant treatment, improved significantly after treatment for either 3 or 6 weeks with risperidone.

  5. A case of neuroleptic malignant syndrome induced by risperidone in a schizophrenic woman.

    Science.gov (United States)

    Gallelli, Luca; Spagnuolo, Vincenzo; Palleria, Caterina; De Sarro, Giovambattista; Ferraro, Maria

    2009-05-01

    We report a case of neuroleptic malignant syndrome in a woman who assumed risperidone for schizoaffective disorders. A 45-year-old woman affected by schizoaffective disorders was admitted to Infectious Disease unit of Crotone Hospital because of a diagnosis of a fever of unknown origin. Clinical evaluation documented confusion and dysphoria, whereas chemical blood evaluation revealed acidosis and liver dysfunction. After few days she was transferred to the Operative Unit of Internal Medicine of San Giovanni in Fiore Hospital because of an increase in liver transaminases. Clinical evaluation showed the persistence of fever (38.8 degrees Celsius), with an increase in CPK, and liver enzymes. Pharmacological evaluation indicated a probable relationship between risperidone and NMS and led to a diagnosis of neuroleptic malignant syndrome associated with risperidone in a woman with schizophrenia. About seven days later, we recorded a complete resolution of her psychiatric symptoms. We postulate a possible interaction between risperidone and neuroleptic malignant syndrome and we suggest to use risperidone with caution in both young and middle aged people.

  6. Facile Synthesis of Mono-Dispersed Polystyrene (PS/Ag Composite Microspheres via Modified Chemical Reduction

    Directory of Open Access Journals (Sweden)

    Wen Zhu

    2013-12-01

    Full Text Available A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP as a dispersant at first. Then, poly-dopamine (PDA was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH32]+ to the PS dispersion, [Ag(NH32]+ complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM, energy-dispersive X-ray spectroscopy (EDS, XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS. The results showed that Ag nanoparticles (NPs were homogeneously immobilized onto the PS microspheres’ surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.

  7. Risperidone-induced weight gain is mediated through shifts in the gut microbiome and suppression of energy expenditure

    Directory of Open Access Journals (Sweden)

    Sarah M. Bahr

    2015-11-01

    Full Text Available Risperidone is a second-generation antipsychotic that causes weight gain. We hypothesized that risperidone-induced shifts in the gut microbiome are mechanistically involved in its metabolic consequences. Wild-type female C57BL/6J mice treated with risperidone (80 μg/day exhibited significant excess weight gain, due to reduced energy expenditure, which correlated with an altered gut microbiome. Fecal transplant from risperidone-treated mice caused a 16% reduction in total resting metabolic rate in naïve recipients, attributable to suppression of non-aerobic metabolism. Risperidone inhibited growth of cultured fecal bacteria grown anaerobically more than those grown aerobically. Finally, transplant of the fecal phage fraction from risperidone-treated mice was sufficient to cause excess weight gain in naïve recipients, again through reduced energy expenditure. Collectively, these data highlight a major role for the gut microbiome in weight gain following chronic use of risperidone, and specifically implicates the modulation of non-aerobic resting metabolism in this mechanism.

  8. Adjunctive Treatment of Acute Mania with Risperidone versus Typical Antipsychotics: A Retrospective Study

    Directory of Open Access Journals (Sweden)

    Jui-Hsiu Tsai

    2005-12-01

    Full Text Available Few studies have directly compared atypical antipsychotics (e.g. risperidone with typical antipsychotics as adjunctive therapy in patients hospitalized for acute mania, especially during a lengthy hospital stay. Our retrospective, case-controlled study is a chart review of 64 patients with Diagnostic and Statistical Manual of Mental Disorders, 4th edition, defined bipolar I disorder (current episode, mania. Patients were divided into two groups according to the adjunctive medications used: the risperidone group (mood stabilizers plus risperidone and the control group (mood stabilizers plus typical antipsychotics. Outcome at discharge, medications, adverse drug effects, and length of hospital stay were compared between groups, controlling for gender, age, number of prior admissions, and duration of illness. Results indicated no statistically significant differences between groups in the controlled factors, Global Assessment of Functioning and Clinical Global Impression-Improvement scores, and adverse drug events. Patients in the risperidone group used significantly lower doses of trihexyphenidyl than those in the control group (p < 0.05. Patients treated with risperidone had a shorter hospital stay than those treated with typical antipsychotics (p < 0.01. In conclusion, antipsychotics are effective as adjunctive agents in the treatment of acute mania. The use of risperidone, in particular, decreases the need for anticholinergics and may lead to a shorter hospital stay compared with typical antipsychotics.

  9. Development and Evaluation of Isoniazid Loaded Silk Fibroin Microsphere

    Directory of Open Access Journals (Sweden)

    Narinder Singh

    Full Text Available Aim: Current experimental investigation is dedicated to prepare microspheres with small size and good sphericity by Phase Separation method using Isoniazid (INH as model drug. Silk fibroin has unique intrinsic qualities like biodegradability, biocompatibility or release properties and their tunable drug loading capacity. The delivery loading proficiency of the drug molecules in silk spheres be contingent on their charge, and hydrophobicity or subsequent in altered drug release profiles. Methods: In the present work Isoniazid loaded silk fibroin microsphere was prepared by using phase separation method. Microsphere was evaluated for Ultraviolet-visible spectroscopy, Fourier Transform infrared spectroscopy, Entrapment efficiency, Scanning electron microscopy Studies. Results: Scanning electron microscopy studies revealed that Isoniazid Loaded Silk Fibroin Microspheres were spherical. Entrapment Efficiency of Isoniazid loaded Microspheres of different Formulation from F1 to F5 was in range of 53 to 68 %. F3 showed 68.47 % entrapment Efficiency and the optimized formulation drug release was 93.56 % at 24 hours. Conclusion: Experimental report disclosed a new aqueous based formulation method for silk spheres with controllable shape or size and sphere. Isoniazid loaded silk microspheres may act as ideal nano formulation with elaborated studies.

  10. An open-label extension study of the safety and efficacy of risperidone in children and adolescents with autistic disorder.

    Science.gov (United States)

    Kent, Justine M; Hough, David; Singh, Jaskaran; Karcher, Keith; Pandina, Gahan

    2013-12-01

    The purpose of this study was to evaluate the long-term safety and efficacy of risperidone in treating irritability and related behaviors in children and adolescents with autistic disorders. In this 6 month (26 week) open-label extension (OLE) study, patients (5-17 years of age, who completed the previous fixed-dose, 6 week, double-blind [DB] phase) were flexibly dosed with risperidone based on body weight. The maximum allowed dose was 1.25 mg/day for those weighing 20 to autistic, psychiatric, and behavioral disorders. Patients experienced some additional improvement in irritability and related behaviors. This phase-4 study is registered at ClinicalTrials.gov (NCT00576732).

  11. The antidepressant- and anxiolytic-like effects following co-treatment with escitalopram and risperidone in rats.

    Science.gov (United States)

    Kaminska, K; Rogoz, Z

    2016-06-01

    Several clinical reports have documented a beneficial effect of the addition of a low dose of risperidone to the ongoing treatment with antidepressants, in particular selective serotonin reuptake inhibitors (SSRI), in the treatment of drug-resistant depression and treatment-resistant anxiety disorders. In the present study, we investigated the effect of treatment with the antidepressant escitalopram (SSRI) given separately or jointly with a low dose of risperidone (an atypical antipsychotic) in the forced swim test and in the elevated plus-maze test in rats. The obtained results showed that escitalopram at doses of 2.5 or 5 mg/kg evoked antidepressant-like effect in the forced swim test. Moreover, risperidone at low doses (0.05 or 0.1 mg/kg) enhanced the antidepressant-like activity of escitalopram (1 mg/kg) in this test by increasing the swimming time and decreasing the immobility time in those animals. WAY 100635 (a serotonin 5-HT1A receptor antagonist) at a dose of 0.1 mg/kg abolished the antidepressant-like effect induced by co-administration of escitalopram and risperidone. The active behavior in that test did not reflect an increase in general activity, since the combined treatment with escitalopram and risperidone failed to enhance the exploratory activity of rats. In the following experiment, we showed that escitalopram (5 mg/kg) and mirtazapine (5 or 10 mg/kg) or risperidone (0.1 mg/kg) induced an anxiolytic-like effect in the elevated plus-maze test, and the combined treatment with an ineffective dose of risperidone (0.05 mg/kg) enhanced the anxiolytic-like effects of escitalopram (2.5 mg/kg) or mirtazapine (1 and 2.5 mg/kg) in this test. The obtained results suggest that risperidone applied at a low dose enhances the antidepressant-like activity of escitalopram in the forced swim test, and that 5-HT1A receptors may play some role in these effects. Moreover, a low dose of risperidone may also enhance the anxiolytic-like action of the studied

  12. Aripiprazole versus risperidone for treating children and adolescents with tic disorder: a randomized double blind clinical trial.

    Science.gov (United States)

    Ghanizadeh, Ahmad; Haghighi, Alireza

    2014-10-01

    There are some uncontrolled studies about the efficacy and safety of both aripiprazole and risperidone for treating tic disorder. Moreover, the efficacy of these medications has never been compared. This is the first double blind randomized clinical trial comparing the safety and efficacy of aripiprazole and risperidone for treating patients with tic disorder. Sixty children and adolescents with tic disorder were randomly allocated into one of the two groups to receive either aripiprazole or risperidone for 2 months. The primary outcome measure was the score of Yale Global Tic Severity Scale. In addition, health related quality of life and adverse events were assessed. Both aripiprazole and risperidone decreased the Yale Global Tic Severity Scale score during this trial. Moreover, both medications increased the health related quality of life score. Both aripiprazole and risperidone were tolerated well. Aripiprazole [3.22 (1.9) mg/day] decreased tic score as much as risperidone [0.6 (0.2) mg/day]. Their adverse effects and their effects on health related quality of life were comparable. However, risperidone increased the patients' social functioning more than aripiprazole in short term.

  13. [Differences in cerebral blood flow following risperidone treatment in children with autistic disorder].

    Science.gov (United States)

    Ozdemir, Dilşad Foto; Karabacak, Neşe Ilgin; Akkaş, Burcu; Akdemir, Ozgür; Unal, Fatih; Senol, Selahattin

    2009-01-01

    Functional changes in the brains of autistic children due to risperidone treatment and theirs relationship to the symptom clusters are yet unknown. In this autistic disorder case series we aimed to comparatively evaluate the clinical findings before and after risperidone treatment, and regional cerebral blood flow (rCBF) findings with 99mTc-hexamethylpropyleneamine oxime (HMPAO) brain SPECT. Eleven autistic patients (age range: 6-7 years; 4 girls, 7 boys) received risperidone therapy (1.5-2.5 mg d(-1)) and were followed-up for 3 months. All the patients underwent neurologic examinations, psychometric examinations, and SPECT imaging, both at the start of risperidone treatment and 3 months after the treatment started. Clinical observations, and the observations of parents and teachers were recorded. These results were compared with cerebral perfusion indices obtained from SPECT data. After 3 months of treatment changes in rCBF were observed in various regions and to varying degrees. We observed relationships between clinical symptoms and pre-therapy rCBF findings, and between clinical improvement and rCBF changes. Findings in the present case series are the first to demonstrate a relationship between clinical improvement and regional perfusion patterns after risperidone treatment. We think that these findings may contribute to the understanding of the neurofunctional mechanisms and hypothetical models of autism.

  14. Microradiographic microsphere manipulator

    International Nuclear Information System (INIS)

    Singleton, R.M.

    1980-01-01

    A method and apparatus are provided for radiographic characterization of small hollow spherical members (microspheres), constructed of either optically transparent or opaque materials. The apparatus involves a microsphere manipulator which holds a batch of microspheres between two parallel thin plastic films for contact microradiographic characterization or projection microradiography thereof. One plastic film is translated to relative to and parallel to the other to roll the microspheres through any desired angle to allow different views of the microspheres

  15. A Randomized Open Label Comparison of the Effects ofRisperidone and Haloperidol on Sexual Function

    Directory of Open Access Journals (Sweden)

    S. Jaber Mousavi

    2009-12-01

    Full Text Available "n Objective: "nSexual dysfunction in patients who take antipsychotics causes adecline in their quality of life and medication acceptance. Considering the restrictions in cross sectional design of many earlier researches, we used a clinical trial aimed at assessing sexual dysfunction by substituting Risperidone, an atypical antipsychotic drug, with Haloperidol, a typical one . "n "n "nMethod: This clinical trial was conducted on 51 patients who had been using Risperidone with a minimum dose of 2 mg/daily for at least 2 months. The patients were randomly divided into 2 groups. The first group continued taking Risperidone, whereas the second group was given Haloperidol. Sexual function prior to and after the drug substitution was assessed using a sexual questionnaire designed to assess four stages of sexual function . "nResults: Compared to those who changed their medication to Haloperidol, the patients who remained on Risperidone therapy suffered from more sexual dysfunction, especially in their tendency towards having sexual activities (P= 0.01, post menstrual sexual activity (P= 0.002, and reaching orgasm in their sexual activities (P= 0.04; however in the Haloperidol group, no significant difference was observed before and after the change in medication . "nConclusion: Although Risperidone and Haloperidol can both disturb patients'sexual function, the side effects of Risperidone are stronger. Hence toprevent the decline of medication acceptance or irregular consumption by patients which may lead to possible relapse, substitution of Risperidone withanother drug with fewer side effects on sexual activities is definitely to the advantage of the patients .

  16. Review of risperidone for the treatment of pediatric and adolescent bipolar disorder and schizophrenia

    Directory of Open Access Journals (Sweden)

    Jeffrey R Bishop

    2008-03-01

    Full Text Available Jeffrey R Bishop1,2, Mani N Pavuluri21Department of Pharmacy Practice, University of Illinois at Chicago College of Pharmacy, Chicago, IL, USA; 2Department of Psychiatry, Pediatric Mood Disorders Program and Center for Cognitive Medicine, University of Illinois at Chicago College of Medicine, Chicago, IL, USAAbstract: Risperidone is a commonly used medication for the treatment of bipolar disorder and schizophrenia in children and adolescents. It has been studied as a monotherapy treatment in early onset schizophrenia and as both monotherapy and combination therapy for pediatric bipolar disorder. Studies to date indicate that risperidone is an effective treatment for positive and negative symptoms of schizophrenia and mania symptoms of bipolar disorder. In young patient populations, side effects such as weight gain, extrapyramidal side effects, and prolactin elevation require consideration when evaluating the risk benefit ratio for individual patients. Here we review published studies of risperidone for the treatment of bipolar disorder and schizophrenia in children and adolescents to provide practitioners with an overview of published data on the efficacy and safety of risperidone in these patient populations.Keywords: risperidone, bipolar disorder, schizophrenia, children, adolescents

  17. Risperidone – Solid-state characterization and pharmaceutical compatibility using thermal and non-thermal techniques

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Josiane Souza Pereira; Veronez, Isabela Pianna; Rodrigues, Larissa Lopes [Laboratório de Análise e Caracterização de Fármacos – LACFar, Instituto de Química, Universidade Federal de Alfenas, Alfenas, Minas Gerais (Brazil); Trevisan, Marcello G. [Laboratório de Análise e Caracterização de Fármacos – LACFar, Instituto de Química, Universidade Federal de Alfenas, Alfenas, Minas Gerais (Brazil); National Institute of Bioanalytics Science and Technology – INCTBio, Institute of Chemistry – UNICAMP, 13084-653, Campinas, São Paulo (Brazil); Garcia, Jerusa Simone, E-mail: jerusa.garcia@unifal-mg.edu.br [Laboratório de Análise e Caracterização de Fármacos – LACFar, Instituto de Química, Universidade Federal de Alfenas, Alfenas, Minas Gerais (Brazil)

    2013-09-20

    Highlights: • DSC was used to characterize Risperidone and study its compatibility with excipients. • FT-IR associated with PCA was used to complement DSC data. • LC analyzes confirmed the DSC and FT-IR/PCA results. • Risperidone was incompatible with three among five excipients evaluated. - Abstract: A full solid-state characterization of risperidone was conducted using differential scanning calorimetry (DSC), thermogravimetry (TG), powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM) to examine its physicochemical properties and polymorphism. The primary aim of this work was to study the compatibility of risperidone with pharmaceutical excipients using DSC to obtain and compare the curves of the active pharmaceutical ingredient (API) and the excipients with their 1:1 (w/w) binary mixtures. These same binary mixtures were turned to room temperature and analyzed by FT-IR combined with principal component analysis (PCA) to evaluate solid-state incompatibilities. The chemical incompatibilities of these samples were verified using a stability-indicating liquid chromatography (LC) method to assay for the API and evaluate the formation of degradation products. All of these methods showed incompatibilities between risperidone and the excipients magnesium stearate, lactose and cellulose microcrystalline.

  18. Risperidone in the treatment of behavioral disorders associated with autism in children and adolescents

    Directory of Open Access Journals (Sweden)

    Roberto Canitano

    2008-09-01

    Full Text Available Roberto Canitano, Valeria ScandurraDivision of Child Neuropsychiatry, University Hospital of Siena, Siena, ItalyAbstract: This is a review of the clinical trials investigating the efficacy and safety of risperidone in the treatment of children with autistic spectrum disorders (ASD. The main clinical characteristics are impairment in social skills, communication difficulties, repetitive movements and behaviors, including stereotypies. Pharmacotherapy is mainly directed at the so-called target symptoms, ie, behavioral disorders and the various kinds of repetitions associated with ASD. According to the available data, risperidone seems to be moderately efficacious and safe for treating behavioral disorders. 4 double blind controlled trial. 3 reanalysis studies, and 12 open studies have documented the role of risperidone in children with ASD. Controlled studies have been thoroughly considered in this review.Keywords: autism, pervasive developmental disorders, risperidone

  19. Long-lived impurities of 90Y-labeled microspheres, TheraSphere and SIR-spheres, and the impact on patient dose and waste management.

    Science.gov (United States)

    Metyko, John; Williford, John M; Erwin, William; Poston, John; Jimenez, Sandra

    2012-11-01

    Yittrium-90 microsphere brachytherapy procedures have increased in number due to their efficacy in treating some unresectable metastatic liver tumors. The discovery of long-lived impurities in two microsphere products, first reported between 2006 and 2007, has resulted in some radiation safety concerns. Since then, microsphere production processes have been refined, which reportedly lead to a reduction in detectable by-products. In this study unused vials of TheraSphere and SIR-Spheres, manufactured in early January 2011, were analyzed to identify and quantify the low-level radioactive impurities. Absorbed dose calculations were performed to assess the potential increased dose to the patient due to long-lived impurities. Results showed that while the SIR-Spheres vials contained no detectable impurities (contrary to other published results in the literature), the TheraSphere vials contained 17 radionuclides in one sample and 15 in the other. The dominant impurities were Y and Y, with specific activities ranging from 0.99 ± 3.40 × 10 kBq mg to 6.30 ± 0.40 kBq mg at vendor assay date. Other impurities were on the order of Bq mg. Based on Medical Internal Radiation Dose (MIRD) liver and lung dose estimates, the long-lived impurities would be expected to increase an administered dose by less than 0.1% from the prescribed dose.

  20. Double-blind, placebo-controlled trial of risperidone plus topiramate in children with autistic disorder.

    Science.gov (United States)

    Rezaei, Vala; Mohammadi, Mohammad-Reza; Ghanizadeh, Ahmad; Sahraian, Ali; Tabrizi, Mina; Rezazadeh, Shams-Ali; Akhondzadeh, Shahin

    2010-10-01

    Autism is a complex neurodevelopmental disorder that forms part of a spectrum of related disorders referred to as Autism Spectrum Disorders. The present study assessed the effects of topiramate plus risperidone in the treatment of autistic disorder. Forty children between the ages of 4 and 12 years with a DSM IV clinical diagnosis of autism who were outpatients from a specialty clinic for children were recruited. The children presented with a chief complaint of severely disruptive symptoms related to autistic disorder. Patients were randomly allocated to topiramate+risperidone (Group A) or placebo+risperidone (Group B) for an 8-week, double-blind, placebo-controlled study. The dose of risperidone was titrated up to 2 mg/day for children between 10 and 40 kg and 3 mg/day for children weighting above 40 kg. The dose of topiramate was titrated up to 200 mg/day depending on weight (100 mg/day for 30 kg). Patients were assessed at baseline and after 2, 4, 6 and 8 weeks after starting medication. Measure of outcome was the Aberrant Behavior Checklist-Community (ABC-C) Rating Scale. Difference between the two protocols was significant as the group that received topiramate had a greater reduction in ABC-C subscale scores for irritability, stereotypic behavior and hyperactivity/noncompliance. The results suggest that the combination of topiramate with risperidone may be superior to risperidone monotherapy for children with autistic disorder. However the results need to be further confirmed by a larger randomized controlled trial. Copyright © 2010 Elsevier Inc. All rights reserved.

  1. Preparation of cellulose based microspheres by combining spray coagulating with spray drying.

    Science.gov (United States)

    Wang, Qiao; Fu, Aiping; Li, Hongliang; Liu, Jingquan; Guo, Peizhi; Zhao, Xiu Song; Xia, Lin Hua

    2014-10-13

    Porous microspheres of regenerated cellulose with size in range of 1-2 μm and composite microspheres of chitosan coated cellulose with size of 1-3 μm were obtained through a two-step spray-assisted approach. The spray coagulating process must combine with a spray drying step to guarantee the formation of stable microspheres of cellulose. This approach exhibits the following two main virtues. First, the preparation was performed using aqueous solution of cellulose as precursor in the absence of organic solvent and surfactant; Second, neither crosslinking agent nor separated crosslinking process was required for formation of stable microspheres. Moreover, the spray drying step also provided us with the chance to encapsulate guests into the resultant cellulose microspheres. The potential application of the cellulose microspheres acting as drug delivery vector has been studied in two PBS (phosphate-buffered saline) solution with pH values at 4.0 and 7.4 to mimic the environments of stomach and intestine, respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Enhancement of the anti-immobility action of antidepressants by risperidone in the forced swimming test in mice.

    Science.gov (United States)

    Rogóż, Zofia; Kabziński, Marcin

    2011-01-01

    The aim of the present study was to examine the effect of antidepressants (ADs) belonging to different pharmacological groups and risperidone (an atypical antipsychotic drug), given separately or jointly, on immobility time in the forced swimming test in male C57BL/6J mice. The antidepressants: citalopram, fluvoxamine, sertraline, reboxetine, milnacipran (5 and 10 mg/kg), or risperidone in low doses (0.05 and 0.1 mg/kg) given alone did not change the immobility time of mice in the forced swimming test. Co-treatment with reboxetine or milnacipran (10 mg/kg) and risperidone in a lower dose of 0.05 mg/kg or with sertraline, reboxetine (5 and 10 mg/kg), citalopram, fluvoxamine, milnacipran (10 mg/kg) and risperidone in a higher dose of 0.1 mg/kg produced antidepressant-like effect in the forced swimming test. WAY100635 (a 5-HT(1A) receptor antagonist) inhibited the effects induced by co-administration of ADs and risperidone. Active behavior in the forced swimming test was not a consequence of an increased general activity, since the combined treatment with ADs and risperidone failed to enhance the locomotor activity of mice. The obtained results indicate that a low dose of risperidone enhances the activity of ADs in an animal model of depression, and that, among other mechanisms, 5-HT(1A) receptors may play a role in these effects.

  3. Flexible Microsphere-Embedded Film for Microsphere-Enhanced Raman Spectroscopy.

    Science.gov (United States)

    Xing, Cheng; Yan, Yinzhou; Feng, Chao; Xu, Jiayu; Dong, Peng; Guan, Wei; Zeng, Yong; Zhao, Yan; Jiang, Yijian

    2017-09-27

    Dielectric microspheres with extraordinary microscale optical properties, such as photonic nanojets, optical whispering-gallery modes (WGMs), and directional antennas, have drawn interest in many research fields. Microsphere-enhanced Raman spectroscopy (MERS) is an alternative approach for enhanced Raman detection by dielectric microstructures. Unfortunately, fabrication of microsphere monolayer arrays is the major challenge of MERS for practical applications on various specimen surfaces. Here we report a microsphere-embedded film (MF) by immersing a highly refractive microsphere monolayer array in the poly(dimethylsiloxane) (PDMS) film as a flexible MERS sensing platform for one- to three-dimensional (1D to 3D) specimen surfaces. The directional antennas and wave-guided whispering-gallery modes (WG-WGMs) contribute to the majority of Raman enhancement by the MFs. Moreover, the MF can be coupled with surface-enhanced Raman spectroscopy (SERS) to provide an extra >10-fold enhancement. The limit of detection is therefore improved for sensing of crystal violet (CV) and Sudan I molecules in aqueous solutions at concentrations down to 10 -7 M. A hybrid dual-layer microsphere enhancer, constructed by depositing a MF onto a microsphere monolayer array, is also demonstrated, wherein the WG-WGMs become dominant and boost the enhancement ratio >50-fold. The present work opens up new opportunities for design of cost-effective and flexible MERS sensing platforms as individual or associated techniques toward practical applications in ultrasensitive Raman detection.

  4. Risperidone treatment for ADHD in children and adolescents with bipolar disorder

    Directory of Open Access Journals (Sweden)

    Joseph Biederman

    2008-03-01

    Full Text Available Joseph Biederman, Paul Hammerness, Robert Doyle, Gagan Joshi, Megan Aleardi, Eric MickPediatric Psychopharmacology Research Department, Massachusetts General Hospital, Boston, MA, USAObjective: Children and adolescents with bipolar disorder are also at high risk of having comorbid attention-deficit hyperactivity disorder (ADHD. The objective of this study was to estimate improvement in ADHD symptoms in children with bipolar disorder.Methods: This was an open-label, study of risperidone monotherapy for the treatment of pediatric bipolar disorder. Thirty-one children and adolescents 4–15 years of age (7.2 ± 2.8 years of both sexes (71%, N = 22 male with pediatric bipolar disorder (YMRS score = 32.9 ± 8.8 and ADHD (ADHD-RS score = 37.9 ± 8.9 were included in these analyses.Results: Improvement in ADHD symptoms was contingent on improvement in manic symptoms. Although both hyperactive/impulsive (−7.5 ± 5.5.6, p < 0.05 and inattentive (−6.8 ± 5.0, p < 0.05 ADHD symptoms were significantly improved with risperidone, improvement was modest, and only 29% of subjects (N = 6 showed a 30% reduction in ADHD rating scale scores and had a CGI-I ≤ 2.Conclusions: These results suggest that that treatment with risperidone is associated with tangible but generally modest improvement of symptoms of ADHD in children with bipolar disorder.Keywords: ADHD, bipolar disorder, children, risperidone

  5. Weight changes and their associations with demographic and clinical characteristics in risperidone maintenance treatment for schizophrenia.

    Science.gov (United States)

    Xiang, Y-T; Wang, C-Y; Ungvari, G S; Kreyenbuhl, J A; Chiu, H F K; Lai, K Y C; Lee, E H M; Bo, Q-J; Dixon, L B

    2011-06-01

    This study aimed to characterize weight changes in schizophrenia patients taking risperidone as part of a randomized, controlled, open-label clinical trial. A total of 374 patients with schizophrenia who had been clinically stabilized following an acute episode were randomly assigned to a 'no-dose-reduction' group (initial optimal therapeutic doses continued throughout the study), a '4-week group' (initial optimal therapeutic doses continued for 4 weeks followed by a half dose reduction that was maintained until the end of the study) or a '26-week group' (initial optimal therapeutic doses continued for 26 weeks followed by a half dose reduction until the end of the study). Participants were assessed monthly using standardized assessment instruments during the first 6 months, and then every 2 months until the last recruited patient completed the 1-year follow-up. Weight gain was defined as gaining at least 7% of initial body weight, weight loss as losing at least 7% of initial body weight. A BMI weight loss compared to being normal weight. No correlation was found between weight change and dose reduction. Weight change is a common, long-term, but heterogeneous side effect in risperidone maintenance treatment for stable schizophrenia patients. Special attention should be paid to fluctuations in weight that may occur throughout the course of treatment with risperidone. © Georg Thieme Verlag KG Stuttgart · New York.

  6. Comparing Efficacy and Side Effects of Memantine vs. Risperidone in the Treatment of Autistic Disorder.

    Science.gov (United States)

    Nikvarz, Nikvarz; Alaghband-Rad, Javad; Tehrani-Doost, Mehdi; Alimadadi, Abbas; Ghaeli, Padideh

    2017-01-01

    Introduction: This study was aimed to compare the efficacy and side effects of memantine, an antagonist of the NMDA receptor of glutamate, with risperidone given the fact that glutamate has been noted for its possible effects in the pathogenesis of autism. Risperidone, an atypical antipsychotic, has been approved by FDA for the management of irritability associated with autism. Methods: 30 children, aged 4-17 years, entered an 8-week, randomized trial. Patients were randomly assigned to receive either risperidone or memantine. Autism Behavior Checklist (ABC), Childhood Autism Rating Scale (CARS), Clinical Global Impressions - Improvement (CGI-I) and Clinical Global Impression-Severity (CGI-S) scales were used to assess behavioral symptoms of the patients. Results: Both risperidone and memantine reduced the scores of 4 subscales of ABC as well as the 10-item and the total score of CARS significantly. However, differences between the 2 drugs in the scores of each evaluating scale were not found to be significant. Relatively, larger number of patients on risperidone showed "very much improvement" when assessed by CGI-I scale when compared with those on memantine. Discussion and conclusion: The present study suggests that memantine may have beneficial effects in the treatment of many core symptoms of autism. Therefore, memantine may be considered as a potential medication in the treatment of those autistic children who do not respond or cannot tolerate side effects of risperidone. © Georg Thieme Verlag KG Stuttgart · New York.

  7. Neutron transmission measurements on hydrogen filled microspheres

    International Nuclear Information System (INIS)

    Dyrnjaja, Eva; Hummel, Stefan; Keding, Marcus; Smolle, Marie-Theres; Gerger, Joachim; Zawisky, Michael

    2014-01-01

    Hollow microspheres are promising candidates for future hydrogen storage technologies. Although the physical process for hydrogen diffusion through glass is well understood, measurements of static quantities (e.q. hydrogen pressure inside the spheres) as well as dynamic properties (e.g. diffusion rate of hydrogen through glass) are still difficult to handle due to the small size of the spheres (d≈15μm). For diffusion rate measurements, the long-term stability of the experiment is also mandatory due to the relatively slow diffusion rate. In this work, we present an accurate and long-term stable measurement technique for static and dynamic properties, using neutron radiography. Furthermore, possible applications for hydrogen filled microspheres within the scope of radiation issues are discussed

  8. Recent advances in polymeric microspheres for parenteral drug delivery--part 1.

    Science.gov (United States)

    Mao, Shirui; Guo, Chunqiang; Shi, Yi; Li, Luk Chiu

    2012-09-01

    Polymeric microspheres have been established as a valuable parenteral drug delivery system for sustained release of therapeutic agents via subcutaneous or intramuscular injection. Biodegradable polymers which are either synthetic or from natural sources are reviewed with respect to recent advances in exploring their applications for microsphere fabrications. New information on the impact of formulation variables on the properties of microspheres formed by an emulsion method was also presented. The characterization of microspheres using advanced physical analytical techniques was also reviewed and the utilization of the information in assessing in vivo performance of the product was also highlighted. The broad clinical use of microspheres for delivery of therapeutic agents in particular biologics such as proteins has not been realized commercially. The limited availability of biodegradable polymers with a long history of regulatory approval and the challenges in gaining regulatory approval of a new polymer have hindered the development of microspheres for parenteral drug delivery.

  9. Can authorities appreciably enhance the prescribing of oral generic risperidone to conserve resources? Findings from across Europe and their implications.

    Science.gov (United States)

    Godman, Brian; Petzold, Max; Bennett, Kathleen; Bennie, Marion; Bucsics, Anna; Finlayson, Alexander E; Martin, Andrew; Persson, Marie; Piessnegger, Jutta; Raschi, Emanuel; Simoens, Steven; Zara, Corinne; Barbui, Corrado

    2014-06-13

    Generic atypical antipsychotic drugs offer health authorities opportunities for considerable savings. However, schizophrenia and bipolar disorders are complex diseases that require tailored treatments. Consequently, generally there have been limited demand-side measures by health authorities to encourage the preferential prescribing of generics. This is unlike the situation with hypertension, hypercholaesterolaemia or acid-related stomach disorders.The objectives of this study were to compare the effect of the limited demand-side measures in Western European countries and regions on the subsequent prescribing of risperidone following generics; to utilise the findings to provide future guidance to health authorities; and where possible, to investigate the utilisation of generic versus originator risperidone and the prices for generic risperidone. Principally, this was a segmented regression analysis of retrospective time-series data of the effect of the various initiatives in Belgium, Ireland, Scotland and Sweden following the introduction of generic risperidone. The study included patients prescribed at least one atypical antipsychotic drug up to 20 months before and up to 20 months after generic risperidone. In addition, retrospective observational studies were carried out in Austria and Spain (Catalonia) from 2005 to 2011 as well as one English primary care organisation (Bury Primary Care Trust (PCT)). There was a consistent steady reduction in risperidone as a percentage of total selected atypical antipsychotic utilisation following generics. A similar pattern was seen in Austria and Spain, with stable utilisation in one English PCT. However, there was considerable variation in the utilisation of generic risperidone, ranging from 98% of total risperidone in Scotland to only 14% in Ireland. Similarly, the price of generic risperidone varied considerably. In Scotland, generic risperidone was only 16% of pre-patent loss prices versus 72% in Ireland. Consistent

  10. Risperidone Versus Methylphenidate in Treatment of Preschool Children With Attention-Deficit Hyperactivity Disorder.

    Science.gov (United States)

    Arabgol, Fariba; Panaghi, Leily; Nikzad, Vahid

    2015-02-01

    Attention Deficit Hyperactivity Disorder (ADHD) is a common psychiatric diagnosis among preschool children. The aim of this study was to examine the Risperidone treatment compared to Methylphenidate (MPH) in preschool children with ADHD. Thirty three outpatient preschool children, aged 3-6 years, diagnosed with ADHD (The diagnosis of ADHD was established by two child and adolescent psychiatrists according to the DSM-IV-TR criteria), participated in a 6-week, double-blind clinical trial with risperidone (0.5-1.5 mg/d) and methylphenidate (5-20 mg/d), in two divided doses. Treatment outcomes were assessed using the Parent ADHD Rating Scale and Conners Rating Scale. Patients were assessed by a child psychiatrist at baseline, 2, 4 and 6 weeks after the medication started. Side effects were also rated by side effects questionnaire. There were no significant differences between the two protocols on the Parent ADHD Rating Scale scores (P > 0.05) and Parent Conners Rating Scale scores (P > 0.05). Both groups showed a significant improvement in ADHD symptoms over the 6 weeks of treatment for parent ADHD Rating Scale (P benefits and adverse effects in long term use and comorbid conditions.

  11. Quality of life and adverse effects of olanzapine versus risperidone therapy in patients with schizophrenia.

    Science.gov (United States)

    Chaves, Katarina Melo; Serrano-Blanco, Antoni; Ribeiro, Susana Barbosa; Soares, Luiz Alberto Lira; Guerra, Gerlane Coelho Bernardo; do Socorro Costa Feitosa Alves, Maria; de Araújo Júnior, Raimundo Fernandes; de Paula Soares Rachetti, Vanessa; Filgueira Júnior, Antônio; de Araújo, Aurigena Antunes

    2013-03-01

    This cross-sectional study aimed to compare the effects of treatment with an atypical antipsychotic drug (olanzapine or risperidone) on quality of life (QoL) and to document adverse effects in 115 patients diagnosed with schizophrenia who attended the ambulatory service of Hospital Dr. João Machado, Natal, Rio Grande do Norte, Brazil. Socioeconomic, sociodemographic, and clinical variables were compared. The QoL Scale validated for Brazil (QLS-BR) was used to evaluate QoL, and adverse effects were assessed using the Udvalg for Kliniske Undersøgelser Side Effect Rating Scale. Data were analyzed using the χ(2) test and Student's t test, with a significance level of 5 %. Patients in both drug groups showed severe impairment in the occupational domain of the QLS-BR. Global QLS-BR scores indicated impairment among risperidone users and severe impairment among olanzapine users. The most significant side effects were associated with risperidone, including asthenia/lassitude/fatigue, somnolence/sedation, paresthesia, change in visual accommodation, increased salivation, diarrhea, orthostatic posture, palpitations/tachycardia, erythema, photosensitivity, weight loss, galactorrhea, decreased sexual desire, erectile/orgasmic dysfunction, vaginal dryness, headache, and physical dependence. QoL was impaired in patients using olanzapine and in those using risperidone. Risperidone use was associated with psychic, neurological, and autonomous adverse effects and other side effects.

  12. Case Report: Valproic Acid and Risperidone Treatment Leading to Development of Hyperammonemia and Mania

    Science.gov (United States)

    Carlson, Teri; Reynolds, Charles A.; Caplan, Rochelle

    2007-01-01

    This case report describes two children who developed hyperammonemia together with frank manic behavior during treatment with a combination of valproic acid and risperidone. One child had been maintained on valproic acid for years and risperidone was added. In the second case, valproic acid was introduced to a child who had been treated with…

  13. Dopamine D2/D3 receptor binding of [123I]epidepride in risperidone-treatment chronic MK-801-induced rat schizophrenia model using nanoSPECT/CT neuroimaging

    International Nuclear Information System (INIS)

    Huang, Y.R.; Pai, C.W.; Cheng, K.H.; Kuo, W.I.; Chen, M.W.; Chang, K.W.

    2014-01-01

    Introduction: Epidepride is a compound with an affinity in picomolar range for D 2 /D 3 receptors. The aim of this work was designed to investigate the diagnostic possibility of [ 123 I]epidepride imaging platform for risperidone-treatment chronic MK-801-induced rat schizophrenia model. Methods: Rats received repeated administration of MK-801 (dissolved in saline, i.p., 0.3 mg/kg/day) or saline for 4 weeks. After 1-week administration of MK-801, rats in MK-801 + risperidone group received risperidone (0.5 mg/kg/day) intraperitoneally 15 min prior to MK-801 administration for the rest of 3-week treatment. We obtained serial [ 123 I]epidepride neuroimages from nanoSPECT/CT and evaluated the alteration of specific binding in striatum and midbrain. Results: Risperidone reversed chronic MK-801-induced decrease in social interaction duration. IHC and ELISA analysis showed consistent results that chronic MK-801 treatment significantly decreased striatal and midbrain D 2 R expression but repeated risperidone administration reversed the effect of MK-801 treatment. In addition, [ 123 I]epidepride nanoSPECT/CT neuroimaging revealed that low specific [ 123 I]epidepride binding ratios caused by MK-801 in striatum and midbrain were statistically alleviated after 1- and 2-week risperidone administration, respectively. Conclusions: We established a rat schizophrenia model by chronic MK-801 administration for 4 weeks. [ 123 I]Epidepride nanoSPECT neuroimaging can trace the progressive alteration of D 2 R expression in striatum and midbrain caused by long-lasting MK-801 treatment. Besides diagnosing illness stage of disease, [ 123 I]epidepride can be a useful tool to evaluate therapeutic effects of antipsychotic drug in chronic MK-801-induced rat schizophrenia model

  14. Risperidone in the treatment of behavioral disorders associated with autism in children and adolescents.

    Science.gov (United States)

    Canitano, Roberto; Scandurra, Valeria

    2008-08-01

    This is a review of the clinical trials investigating the efficacy and safety of risperidone in the treatment of children with autistic spectrum disorders (ASD). The main clinical characteristics are impairment in social skills, communication difficulties, repetitive movements and behaviors, including stereotypies. Pharmacotherapy is mainly directed at the so-called target symptoms, ie, behavioral disorders and the various kinds of repetitions associated with ASD. According to the available data, risperidone seems to be moderately efficacious and safe for treating behavioral disorders. 4 double blind controlled trial. 3 reanalysis studies, and 12 open studies have documented the role of risperidone in children with ASD. Controlled studies have been thoroughly considered in this review.

  15. Processing and Characterization of Sol-Gel Cerium Oxide Microspheres

    Energy Technology Data Exchange (ETDEWEB)

    McClure, Zachary D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Padilla Cintron, Cristina [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-09-27

    Of interest to space exploration and power generation, Radioisotope Thermoelectric Generators (RTGs) can provide long-term power to remote electronic systems without the need for refueling or replacement. Plutonium-238 (Pu-238) remains one of the more promising materials for thermoelectric power generation due to its high power density, long half-life, and low gamma emissions. Traditional methods for processing Pu-238 include ball milling irregular precipitated powders before pressing and sintering into a dense pellet. The resulting submicron particulates of Pu-238 quickly accumulate and contaminate glove boxes. An alternative and dust-free method for Pu-238 processing is internal gelation via sol-gel techniques. Sol-gel methodology creates monodisperse and uniform microspheres that can be packed and pressed into a pellet. For this study cerium oxide microspheres were produced as a surrogate to Pu-238. The similar electronic orbitals between cerium and plutonium make cerium an ideal choice for non-radioactive work. Before the microspheres can be sintered and pressed they must be washed to remove the processing oil and any unreacted substituents. An investigation was performed on the washing step to find an appropriate wash solution that reduced waste and flammable risk. Cerium oxide microspheres were processed, washed, and characterized to determine the effectiveness of the new wash solution.

  16. Long-Acting Antiretrovirals: Where Are We now?

    Science.gov (United States)

    Nyaku, Amesika N; Kelly, Sean G; Taiwo, Babafemi O

    2017-04-01

    Current HIV treatment options require daily use of combination antiretroviral drugs. Many persons living with HIV experience treatment fatigue and suboptimal adherence as a result. Long-acting antiretroviral drugs are being developed to expand options for HIV treatment. Here, we review the agents in development, and evaluate data from recent clinical trials. In addition, we anticipate challenges to successful widespread use of long-acting antiretrovirals. Parenteral nanosuspensions of cabotegravir and rilpivirine, and dapivirine vaginal ring are the farthest in clinical development. Long-acting modalities in earlier development stages employ drug-loaded implants, microparticles, or targeted mutagenesis, among other innovations. Long-acting antiretroviral drugs promise new options for HIV prevention and treatment, and ways to address poor adherence and treatment fatigue. Further studies will identify the long-acting agents or combinations that are suitable for routine use. Creative solutions will be needed for anticipated implementation challenges.

  17. Symptom response and side-effects of olanzapine and risperidone in young adults with recent onset schizophrenia

    NARCIS (Netherlands)

    van Bruggen, Johanna; Tijssen, Jans; Dingemans, Petrus; Gersons, Berthold; Linszen, Donald

    2003-01-01

    The symptom response and side-effects of olanzapine and risperidone were compared in patients with recent onset schizophrenia. Actively symptomatic patients n=44) randomly, received olanzapine 15 mg (median dose) or risperidone 4 mg (median dose). Symptom response and side-effects were measured

  18. Double-blind comparison of ziprasidone and risperidone in the treatment of Chinese patients with acute exacerbation of schizophrenia

    Directory of Open Access Journals (Sweden)

    Hongyan Zhang

    2011-03-01

    Full Text Available Hongyan Zhang1, Huafang Li2, Liang Shu1, Niufan Gu2, Gang Wang3, Yongzhen Weng3, Shiping Xie4, Xinbao Zhang4, Ting Li5, Cui Ma5, Wei Yu6, Bruce Parsons7, Manjula Schou81Institute of Mental Health, Peking University, Beijing, China; 2Shanghai Mental Health Center, Shanghai, China; 3Capital Medical University, Beijing An Ding Hospital, Beijing, China; 4Nanjing Brain Hospital, Nanjing, China; 5Guangzhou Brain Hospital, Guangzhou, China; 6Pfizer China, Beijing, China; 7Pfizer Inc, New York, NY, USA; 8Pfizer Australia, Sydney, AustraliaBackground: The aim of the study was to evaluate the efficacy and safety of ziprasidone versus risperidone in Chinese subjects with acute exacerbation of schizophrenia.Methods: In patients meeting the Chinese Classification of Mental Disorders criteria for schizophrenia and with a Positive and Negative Syndrome Scale (PANSS total score ≥60 were randomly assigned to six weeks of double-blind treatment with ziprasidone 40–80 mg twice daily or risperidone 1–3 mg bid, flexibly dosed. Noninferiority was demonstrated if the upper limit of the two-sided 95% confidence interval (CI for the difference in PANSS total score improvement from baseline in the evaluable population was smaller than the prespecified noninferiority margin of 10 units.Results: The intent-to-treat population comprised 118 ziprasidone-treated and 121 risperidone-treated subjects. Improvement (reduction from baseline to week 6 in PANSS total score was (-35.6 [95% CI: -38.6, -32.6] for ziprasidone and (-37.1 [95% CI: -39.9, -34.4] for risperidone. Noninferiority was demonstrated in the evaluable population with a difference score of 1.5 [95% CI: -2.5, 5.5]. Mean prolactin levels decreased at week 6 compared with baseline for ziprasidone (-3.5 ng/mL, but significantly increased for risperidone (61.1 ng/mL; P < 0.001. More risperidone-treated subjects (14.9% than ziprasidone-treated subjects (4.2% reported weight gain ≥7%. Akathisia and somnolence in

  19. Microsphere-based gradient implants for osteochondral regeneration: a long-term study in sheep

    Science.gov (United States)

    Mohan, Neethu; Gupta, Vineet; Sridharan, Banu Priya; Mellott, Adam J; Easley, Jeremiah T; Palmer, Ross H; Galbraith, Richard A; Key, Vincent H; Berkland, Cory J; Detamore, Michael S

    2015-01-01

    Background: The microfracture technique for cartilage repair has limited ability to regenerate hyaline cartilage. Aim: The current study made a direct comparison between microfracture and an osteochondral approach with microsphere-based gradient plugs. Materials & methods: The PLGA-based scaffolds had opposing gradients of chondroitin sulfate and β-tricalcium phosphate. A 1-year repair study in sheep was conducted. Results: The repair tissues in the microfracture were mostly fibrous and had scattered fissures with degenerative changes. Cartilage regenerated with the gradient plugs had equal or superior mechanical properties; had lacunated cells and stable matrix as in hyaline cartilage. Conclusion: This first report of gradient scaffolds in a long-term, large animal, osteochondral defect demonstrated potential for equal or better cartilage repair than microfracture. PMID:26418471

  20. Risperidone Injection

    Science.gov (United States)

    ... release (long-acting) injection is used to treat schizophrenia (a mental illness that causes disturbed or unusual ... may help control your symptoms but will not cure your condition. Continue to keep appointments to receive ...

  1. A double-blind, placebo-controlled study of risperidone in adults with autistic disorder and other pervasive developmental disorders.

    Science.gov (United States)

    McDougle, C J; Holmes, J P; Carlson, D C; Pelton, G H; Cohen, D J; Price, L H

    1998-07-01

    Neurobiological research has implicated the dopamine and serotonin systems in the pathogenesis of autism. Open-label reports suggest that the serotonin2A-dopamine D2 antagonist risperidone may be safe and effective in reducing the interfering symptoms of patients with autism. Thirty-one adults (age [mean+/-SD], 28.1+/-7.3 years) with autistic disorder (n=17) or pervasive developmental disorder not otherwise specified (n=14) participated in a 12-week double-blind, placebo-controlled trial of risperidone. Patients treated with placebo subsequently received a 12-week open-label trial of risperidone. For persons completing the study, 8 (57%) of 14 patients treated with risperidone were categorized as responders (daily dose [mean+/-SD], 2.9+/-1.4 mg) compared with none of 16 in the placebo group (Pautism (Pautism in adults.

  2. Parenteral nanoemulsions as promising carriers for brain delivery of risperidone: Design, characterization and in vivo pharmacokinetic evaluation.

    Science.gov (United States)

    Đorđević, Sanela M; Cekić, Nebojša D; Savić, Miroslav M; Isailović, Tanja M; Ranđelović, Danijela V; Marković, Bojan D; Savić, Saša R; Timić Stamenić, Tamara; Daniels, Rolf; Savić, Snežana D

    2015-09-30

    This paper describes design and evaluation of parenteral lecithin-based nanoemulsions intended for brain delivery of risperidone, a poorly water-soluble psychopharmacological drug. The nanoemulsions were prepared through cold/hot high pressure homogenization and characterized regarding droplet size, polydispersity, surface charge, morphology, drug-vehicle interactions, and physical stability. To estimate the simultaneous influence of nanoemulsion formulation and preparation parameters--co-emulsifier type, aqueous phase type, homogenization temperature--on the critical quality attributes of developed nanoemulsions, a general factorial experimental design was applied. From the established design space and stability data, promising risperidone-loaded nanoemulsions (mean size about 160 nm, size distribution Solutol(®) HS15 as co-emulsifier, were produced by hot homogenization and their ability to improve risperidone delivery to the brain was assessed in rats. Pharmacokinetic study demonstrated erratic brain profiles of risperidone following intraperitoneal administration in selected nanoemulsions, most probably due to their different droplet surface properties (different composition of the stabilizing layer). Namely, polysorbate 80-costabilized nanoemulsion showed increased (1.4-7.4-fold higher) risperidone brain availability compared to other nanoemulsions and drug solution, suggesting this nanoemulsion as a promising carrier worth exploring further for brain targeting. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Dual Drug Loaded Biodegradable Nanofibrous Microsphere for Improving Anti-Colon Cancer Activity

    Science.gov (United States)

    Fan, Rangrang; Li, Xiaoling; Deng, Jiaojiao; Gao, Xiang; Zhou, Liangxue; Zheng, Yu; Tong, Aiping; Zhang, Xiaoning; You, Chao; Guo, Gang

    2016-06-01

    One of the approaches being explored to increase antitumor activity of chemotherapeutics is to inject drug-loaded microspheres locally to specific anatomic sites, providing for a slow, long term release of a chemotherapeutic while minimizing systemic exposure. However, the used clinically drug carriers available at present have limitations, such as their low stability, renal clearance and residual surfactant. Here, we report docetaxel (DOC) and curcumin (CUR) loaded nanofibrous microspheres (DOC + CUR/nanofibrous microspheres), self-assembled from biodegradable PLA-PEO-PPO-PEO-PLA polymers as an injectable drug carrier without adding surfactant during the emulsification process. The obtained nanofibrous microspheres are composed entirely of nanofibers and have an open hole on the shell without the assistance of a template. It was shown that these DOC + CUR/nanofibrous microspheres could release curcumin and docetaxel slowly in vitro. The slow, sustained release of curcumin and docetaxel in vivo may help maintain local concentrations of active drug. The mechanism by which DOC + CUR/nanofibrous microspheres inhibit colorectal peritoneal carcinomatosis might involve increased induction of apoptosis in tumor cells and inhibition of tumor angiogenesis. In vitro and in vivo evaluations demonstrated efficacious synergistic antitumor effects against CT26 of curcumin and docetaxel combined nanofibrous microspheres. In conclusion, the dual drug loaded nanofibrous microspheres were considered potentially useful for treating abdominal metastases of colorectal cancer.

  4. Risperidone oral disintegrating mini-tablets: A robust-product for pediatrics

    Directory of Open Access Journals (Sweden)

    El-Say Khalid M.

    2015-12-01

    Full Text Available This study was aimed at developing risperidone oral disintegrating mini-tablets (OD-mini-tablets as age-appropriate formulations and to assess their suitability for infants and pediatric use. An experimental Box-Behnken design was applied to assure high quality of the OD-mini-tablets and reduce product variability. The design was employed to understand the influence of the critical excipient combinations on the production of OD-mini-tablets and thus guarantee the feasibility of obtaining products with dosage form uniformity. The variables selected were mannitol percent in Avicel (X1, swelling pressure of the superdisintegrant (X2, and the surface area of Aerosil as a glidant (X3. Risperidone-excipient compatibilities were investigated using FTIR and the spectra did not display any interaction. Fifteen formulations were prepared and evaluated for preand post-compression characteristics. The prepared ODmini- tablet batches were also assessed for disintegration in simulated salivary fluid (SSF, pH 6.2 and in reconstituted skimmed milk. The optimized formula fulfilled the requirements for crushing strength of 5 kN with minimal friability, disintegration times of 8.4 and 53.7 s in SSF and skimmed milk, respectively. This study therefore proposes the risperidone OD-mini-tablet formula having robust mechanical properties, uniform and precise dosing of medication with short disintegration time suitable for pediatric use.

  5. Risperidone oral disintegrating mini-tablets: A robust-product for pediatrics.

    Science.gov (United States)

    El-Say, Khalid M; Ahmed, Tarek A; Abdelbary, Maged F; Ali, Bahaa E; Aljaeid, Bader M; Zidan, Ahmed S

    2015-12-01

    This study was aimed at developing risperidone oral disintegrating mini-tablets (OD-mini-tablets) as age-appropriate formulations and to assess their suitability for infants and pediatric use. An experimental Box-Behnken design was applied to assure high quality of the OD-mini-tablets and reduce product variability. The design was employed to understand the influence of the critical excipient combinations on the production of OD-mini-tablets and thus guarantee the feasibility of obtaining products with dosage form uniformity. The variables selected were mannitol percent in Avicel (X1), swelling pressure of the superdisintegrant (X2), and the surface area of Aerosil as a glidant (X3). Risperidone-excipient compatibilities were investigated using FTIR and the spectra did not display any interaction. Fifteen formulations were prepared and evaluated for pre- and post-compression characteristics. The prepared OD-mini-tablet batches were also assessed for disintegration in simulated salivary fluid (SSF, pH 6.2) and in reconstituted skimmed milk. The optimized formula fulfilled the requirements for crushing strength of 5 kN with minimal friability, disintegration times of 8.4 and 53.7 s in SSF and skimmed milk, respectively. This study therefore proposes the risperidone OD-mini-tablet formula having robust mechanical properties, uniform and precise dosing of medication with short disintegration time suitable for pediatric use.

  6. Long-acting reversible hormonal contraception | Dahan-Farkas ...

    African Journals Online (AJOL)

    Long-acting reversible hormonal contraceptives are effective methods of birth control that provide contraception for an extended period without requiring user action. Long-acting reversible hormonal contraceptives include progesterone only injectables, subdermal implants and the levonorgestrel intrauterine system.

  7. Preparation and Characterization of Zein and Zein-Chitosan Microspheres with Great Prospective of Application in Controlled Drug Release

    Directory of Open Access Journals (Sweden)

    Vinícius Müller

    2011-01-01

    Full Text Available Biomaterials applied as carriers for controlled drug delivery offer many advantages over the conventional systems. Among them, the increase of treatment effectiveness and also a significant reduction of toxicity, due to their biodegradability property, are some special features. In this work, microspheres based on the protein Zein (ZN and ZN associated to the natural polymer Chitosan (CHI were prepared and characterized. The microspheres of ZN and ZN/CHI were characterized by FT-IR spectroscopy and thermal analysis, and the morphology was analyzed by SEM images. The results confirmed the incorporation of CHI within the ZN-based microspheres. The morphological analysis showed that the CHI added increased the microspheres porosity when compared to the ZN microspheres. The chemical and physical characterization and the morphological analysis allow inferring that ZN/CHI microspheres are good candidates to act as a carrier for controlled drug release.

  8. Metallic coating of microspheres

    International Nuclear Information System (INIS)

    Meyer, S.F.

    1980-01-01

    Extremely smooth, uniform metal coatings of micrometer thicknesses on microscopic glass spheres (microspheres) are often needed as targets for inertial confinement fusion (ICF) experiments. The first part of this paper reviews those methods used successfully to provide metal coated microspheres for ICF targets, including magnetron sputtering, electro- and electroless plating, and chemical vapor pyrolysis. The second part of this paper discusses some of the critical aspects of magnetron sputter coating of microspheres, including substrate requirements, the sticking of microspheres during coating (preventing a uniform coating), and the difficulties in growing the desired dense, smooth, uniform microstructure on continuously moving spherical substrates

  9. Frequency of sexual dysfunction and other reproductive side-effects in patients with schizophrenia treated with risperidone, olanzapine, quetiapine, or haloperidol: the results of the EIRE study.

    Science.gov (United States)

    Bobes, J; Garc A-Portilla, M P; Rejas, J; Hern Ndez, G; Garcia-Garcia, M; Rico-Villademoros, F; Porras, A

    2003-01-01

    Atypical antipsychotics seem to differ mainly in their tolerability profile. The aim of this cross-sectional study, the Estudio de Investigaci n de Resultados en Esquizofrenia (Outcomes Research Study in Schizophrenia; EIRE study), was to assess in a clinical setting the frequency of several side-effects related to haloperidol, risperidone, olanzapine, and quetiapine. This article addresses sexual dysfunction and other reproductive side-effects (gynecomastia, menorrhage, amenorrhea, and galactorrhea). We recruited outpatients diagnosed with schizophrenia according to Diagnostic and Statistical Manual of Mental Disorders (DSM-IV; American Psychiatric Association, 1994) criteria and who had received a single antipsychotic (risperidone, olanzapine, quetiapine, or haloperidol) for at least 4 weeks. During a single visit, we collected data, including demographic and clinical characteristics, current antipsychotic and concomitant treatment, and adverse effects listed in a modified version of the UKU Scale. We used a Chi-squared test to determine pairs comparisons of the frequency of adverse reactions between treatments. To estimate risk of a given adverse reaction with a given treatment, we used a logistic regression method. We assessed 636 evaluable patients out of 669 recruited. Frequency of sexual dysfunction was high with haloperidol (38.1%) and also with olanzapine (35.3%), quetiapine (18.2%), and risperidone (43.2%). We found the frequency of other reproductive side-effects to be relatively low with all four drugs: haloperidol (6.9%), olanzapine (6.4%), quetiapine (2.7%), and risperidone (11.7%). Sexual dysfunction appeared to be dose-related with haloperidol, risperidone, and olanzapine. Risperidone and olanzapine showed a higher risk of sexual dysfunction and other reproductive sideeffects than haloperidol. Quetiapine showed a lower risk of sexual dysfunction during short-term treatment ( 12 weeks) are lacking. Our results suggest that none of the atypical

  10. Dopamine transporter density assessed with [123]IPT SPECT before and after risperidone treatment in children with tourette's disorder

    International Nuclear Information System (INIS)

    Ryu, Young Hoon; Kim, Tae Hoon; Ryu, Won Gee

    2004-01-01

    Tourette's disorder (TD), which is characterized by multiple waxing and waning motor tics and one or more vocal tics, is known to be associated with abnormalities in the dopaminergic system. To testify our hypothesis that risperidone would improve tic symptoms of TD patients through the change of the dopaminergic system, we measured the dopamine transporter (DAT) densities between drug-naive children with TD and normal children, and investigated the DAT density before and after treatment with risperidone in drug-naive children with TD, using iodine-123 labelled N-(3-iodopropen-2-yl)-2β-carbomethoxy-3beta-(4-chlorophenyl)tropane ([ 123 I]IPT) single photon emission computed tomography (SPECT). [ 123I ]IPT SPECT imaging and Yale Global Tic Severity Scale-Korean version (YGTSS-K) for assessing the tic symptom severity were carried out before and after treatment with risperidone for 8 weeks in nine drug-naive children with TD. Eleven normal children also underwent SPECT imaging 2 hours after an intravenous administration of [ 123 I]IPT. Drug-naive children with TD had a significantly greater increase in the specific/nonspecific DAT binding ratio of both basal ganglia compared with the normal children. However, no significant difference in the specific/nonspecific DAT binding ratio of the basal ganglia before and after treatment with risperidone in children with TD was found, although tic symptoms were significantly improved with risperidone. These findings suggest that DAT densities are directly associated with the pathophysiology of TD, however, that the effect of risperidone on tic symptoms in children with TD is not attributed to the change of dopaminergic system

  11. Hierarchical Mn₂O₃ Microspheres In-Situ Coated with Carbon for Supercapacitors with Highly Enhanced Performances.

    Science.gov (United States)

    Gong, Feilong; Lu, Shuang; Peng, Lifang; Zhou, Jing; Kong, Jinming; Jia, Dianzeng; Li, Feng

    2017-11-23

    Porous Mn₂O₃ microspheres have been synthesized and in-situ coated with amorphous carbon to form hierarchical C@Mn₂O₃ microspheres by first producing MnCO₃ microspheres in solvothermal reactions, and then annealing at 500 °C. The self-assembly growth of MnCO₃ microspheres can generate hollow structures inside each of the particles, which can act as micro-reservoirs to store biomass-glycerol for generating amorphous carbon onto the surfaces of Mn₂O₃ nanorods consisting of microspheres. The C@Mn₂O₃ microspheres, prepared at 500 °C, exhibit highly enhanced pseudocapacitive performances when compared to the particles after annealed at 400 °C and 600 °C. Specifically, the C@Mn₂O₃ microspheres prepared at 500 °C show high specific capacitances of 383.87 F g -1 at current density of 0.5 A g -1 , and excellent cycling stability of 90.47% of its initial value after cycling for 5000 times. The asymmetric supercapacitors assembled with C@Mn₂O₃ microspheres after annealed at 500 °C and activated carbon (AC) show an energy density of up to 77.8 Wh kg -1 at power density of 500.00 W kg -1 , and a maximum power density of 20.14 kW kg -1 at energy density of 46.8 Wh kg -1 . We can attribute the enhanced electrochemical performances of the materials to their three-dimensional (3D) hierarchical structure in-situ coated with carbon.

  12. Formulation, optimization, and pharmacodynamic evaluation of chitosan/phospholipid/β-cyclodextrin microspheres

    Directory of Open Access Journals (Sweden)

    Shan L

    2016-01-01

    Full Text Available Lu Shan,1 En-Xue Tao,2 Qing-Hui Meng,3 Wen-Xia Hou,3 Kang Liu,1 Hong-Cai Shang,4 Jin-Bao Tang,1 Wei-Fen Zhang1,4 1School of Pharmacy, Weifang Medical University, 2The Affiliated Hospital of Weifang Medical University, 3School of Nursing, Weifang Medical University, Weifang, 4Key Laboratory of Chinese Internal Medicine of Ministry of Education and Beijing, Dongzhimen Hospital, Beijing University of Chinese Medicine, Beijing, People’s Republic of China Abstract: Cholinergic neurotransmission loss is the main cause of cognitive impairment in patients with Alzheimer’s disease. Phospholipids (PLs play an essential role in memory and learning abilities. Moreover, PLs act as a source of choline in acetylcholine synthesis. This study aimed to prepare and optimize the formulation of chitosan/phospholipid/β-cyclodextrin (CTS/PL/β-CD microspheres that can improve cognitive impairment. The CTS/PL/β-CD microspheres were prepared by spray drying, and optimized with an orthogonal design. These microspheres were also characterized in terms of morphology, structure, thermostability, drug loading, and encapsulation efficiency. The spatial learning and memory of rats were evaluated using the Morris water maze test, and the neuroprotective effects of the CTS/PL/β-CD microspheres were investigated by immunohistochemistry. Scanning electron microscopic images showed that the CTS/PL/β-CD microspheres were spherical with slightly wrinkled surfaces. Fourier transform infrared spectroscopy and differential scanning calorimetry proved that PLs formed hydrogen bonds with the amide group of CTS and the hydroxyl group of β-CD. The learning and memory abilities of rats in the treated group significantly improved compared with those in the model group. Immunohistochemical analysis revealed that treatment with the CTS/PL/β-CD microspheres attenuated the expression of protein kinase C-δ and inhibited the activation of microglias. These results suggest that the

  13. Analysis of risperidone and 9-hydroxyrisperidone in human plasma, urine and saliva by MEPS-LC-UV.

    Science.gov (United States)

    Mandrioli, Roberto; Mercolini, Laura; Lateana, Domenico; Boncompagni, Giancarlo; Raggi, Maria Augusta

    2011-01-15

    Risperidone is currently one of the most frequently prescribed atypical antipsychotic drugs; its main active metabolite 9-hydroxyrisperidone contributes significantly to the therapeutic effects observed. An original analytical method is presented for the simultaneous analysis of risperidone and the metabolite in plasma, urine and saliva by high-performance liquid chromatography coupled to an original sample pre-treatment procedure based on micro-extraction by packed sorbent (MEPS). The assays were carried out using a C8 reversed-phase column and a mobile phase composed of 73% (v/v) acidic phosphate buffer (30 mM, pH 3.0) containing 0.23% triethylamine and 27% (v/v) acetonitrile. The UV detector was set at 238 nm and diphenhydramine was used as the internal standard. The sample pre-treatment by MEPS was carried out on a C8 sorbent. The extraction yields values were higher than 92% for risperidone and 90% for 9-hydroxyrisperidone, with RSD for precision always lower than 7.9% for both analytes. Limit of quantification values in the different matrices were 4 ng/mL or lower for risperidone and 6 ng/mL or lower for the metabolite. The method was successfully applied to plasma, urine and saliva samples from psychotic patients undergoing therapy with risperidone, with satisfactory accuracy results (recovery>89%) and no interference from other drugs. Thus, the method seems to be suitable for the therapeutic drug monitoring of schizophrenic patients using the three different biological matrices plasma, urine and saliva. Copyright © 2010 Elsevier B.V. All rights reserved.

  14. Chitosan Microspheres as Radiolabeled Delivery Devices

    International Nuclear Information System (INIS)

    Permtermsin, Chalermsin; Ngamprayad, Tippanan; Phumkhem, Sudkanung; Srinuttrakul, Wannee; Kewsuwan, Prartana

    2007-08-01

    Full text: This study optimized conditions for preparing, characterizing, radiolabeled of chitosan microspheres and the biodistribution of 99mTc-Chitosan microspheres after intravenous administration. Particle size distribution of the microspheres was determined by light scattering. Zeta potential was studied by dynamic light scattering and electrophoresis technique. Biodistribution studies were performed by radiolabeling using 99mTc. The results shown that geometric mean diameter of the microspheres was found to be 77.26?1.96 ?m. Microsphere surface charge of chitosan microspheres was positive charge and zeta potential was 25.80 ? 0.46 mV. The labeling efficiency for this condition was more than 95% and under this condition was stable for at least 6 h. Radioactivity

  15. Synthesis of magnetic polymeric microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Gervald, A Yu; Gritskova, Inessa A; Prokopov, Nikolai I [M.V. Lomonosov Moscow State Academy of Fine Chemical Technology, Moscow (Russian Federation)

    2010-05-13

    The key types of magnetic polymeric microspheres are considered. Methods of synthesis of different types of magnetic nanoparticles and of preparation of stable magnetic fluids on their basis are outlined. The overview of the methods for the manufacture of magnetic polymeric microspheres is presented. The effect of the synthesis conditions on the characteristics of magnetic polymeric microspheres such as the diameter and the particle size distribution and the content of magnetic material is discussed by particular examples. The application fields of magnetic polymeric microspheres are briefly surveyed.

  16. Synthesis of magnetic polymeric microspheres

    International Nuclear Information System (INIS)

    Gervald, A Yu; Gritskova, Inessa A; Prokopov, Nikolai I

    2010-01-01

    The key types of magnetic polymeric microspheres are considered. Methods of synthesis of different types of magnetic nanoparticles and of preparation of stable magnetic fluids on their basis are outlined. The overview of the methods for the manufacture of magnetic polymeric microspheres is presented. The effect of the synthesis conditions on the characteristics of magnetic polymeric microspheres such as the diameter and the particle size distribution and the content of magnetic material is discussed by particular examples. The application fields of magnetic polymeric microspheres are briefly surveyed.

  17. METABOLIC SIDE EFFECTS OF HALOPERIDOL AND RISPERIDONE- A SIX MONTHS FOLLOWUP STUDY

    Directory of Open Access Journals (Sweden)

    Kalaimathi B

    2017-03-01

    Full Text Available BACKGROUND To compare and analyse the metabolic side effects of Risperidone and Haloperidol in newly diagnosed drug-naive schizophrenic disorder patients attending Govt. Stanley Medical College Hospital during initial 6 months of therapy. MATERIALS AND METHODS Newly diagnosed drug-naïve Schizophrenic Patients (n = 60 aged between 18 - 45 years are recruited and randomly allocated into Group A (Risperidone 4 - 6 mg daily and Group B (Haloperidol 5 - 10 mg daily after getting informed consent from the patient’s family members. Patients are followed up monthly for the occurrence of metabolic abnormalities like weight gain, rise in blood pressure, elevated fasting, post-prandial blood sugar level, dyslipidaemia for a period of 6 months. RESULTS Risperidone group showed the mean body weight increase from 64.40 to 69.27, SBP/DBP increase from 123.80/79 to 129.90/83.13; FBS/PPBS increase from 100.20/129.30 to 135.40/185.00; TC increase from 177.23 to 206.23; LDL from 124.30 to 158.30; HDL 48.83 to 50.07; TG 133.47 to 197.83: Haloperidol group showed the mean body weight increase from 64.07 to 68.48, SBP/DBP increase from 123.80/79.00 to 124.27/81.67; FBS/PPBS increase from 100.20/129.30 to 119.87/167.10; TC increase from 177.23 to 197.40; LDL from 119.77 to 139.00; HDL remained 48.83; TG 133.47 to 171.40. CONCLUSION This study showed that patients in both the groups had weight gain, rise in blood sugar, LDL cholesterol and Triglycerides level, but the rise was significant in patients on Risperidone when compared to those on Haloperidol during the 6-month followup.

  18. Risk of Hyperprolactinemia and Sexual Side Effects in Males 10-20 Years Old Diagnosed with Autism Spectrum Disorders or Disruptive Behavior Disorder and Treated with Risperidone

    NARCIS (Netherlands)

    Roke, Yvette; Buitelaar, Jan K.; Boot, Annemieke M.; Tenback, Diederik; van Harten, Peter N.

    2012-01-01

    Objective: The aim of this study was to investigate the long-term treatment effects of risperidone on prolactin levels and prolactin-related side effects in pubertal boys with autism spectrum disorders (ASD) and disruptive behavior disorders (DBD). Method: Physical healthy 10-20-year-old males with

  19. Histological Comparison of Kidney Tissue Following Radioembolization with Yttrium-90 Resin Microspheres and Embolization with Bland Microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Suresh de, E-mail: suresh.desilva@unsw.edu.au [Southern Radiology Group, Radiology Department Sutherland Hospital (Australia); Mackie, Simon [Western General Hospital, Department of Urology (United Kingdom); Aslan, Peter [St George Hospital, Department of Urology (Australia); Cade, David [Sirtex Technology Pty Ltd (Australia); Delprado, Warick [Douglass Hanly Moir Pathology (Australia)

    2016-12-15

    BackgroundIntra-arterial brachytherapy with yttrium-90 ({sup 90}Y) resin microspheres (radioembolization) is a procedure to selectively deliver high-dose radiation to tumors. The purpose of this research was to compare the radioembolic effect of {sup 90}Y-radioembolization versus the embolic effect of bland microspheres in the porcine kidney model.MethodsIn each of six pigs, ~25–33 % of the kidney volume was embolized with {sup 90}Y resin microspheres and an equivalent number of bland microspheres in the contralateral kidney. Kidney volume was estimated visually from contrast-enhanced fluoroscopy imaging. Morphologic and histologic analysis was performed 8–9 weeks after the procedure to assess the locations of the microspheres and extent of tissue necrosis from {sup 90}Y-radioembolization and bland embolization. A semi-quantified evaluation of the non-acute peri-particle and perivascular tissue reaction was conducted. All guidelines for the care and use of animals were followed.ResultsKidneys embolized with {sup 90}Y-radioembolization decreased in mass by 30–70 % versus the contralateral kidney embolized with bland microspheres. These kidneys showed significant necrosis/fibrosis, avascularization, and glomerular atrophy in the immediate vicinity of the {sup 90}Y resin microspheres. By contrast, glomerular changes were not observed, even with clusters of bland microspheres in afferent arterioles. Evidence of a foreign body reaction was recorded in some kidneys with bland microspheres, and subcapsular scarring/infarction only with the highest load (4.96 × 10{sup 6}) of bland microspheres.ConclusionThis study showed that radioembolization with {sup 90}Y resin microspheres produces localized necrosis/fibrosis and loss of kidney mass in a porcine kidney model. This result supports the study of {sup 90}Y resin microspheres for the localized treatment of kidney tumors.

  20. Histological Comparison of Kidney Tissue Following Radioembolization with Yttrium-90 Resin Microspheres and Embolization with Bland Microspheres

    International Nuclear Information System (INIS)

    Silva, Suresh de; Mackie, Simon; Aslan, Peter; Cade, David; Delprado, Warick

    2016-01-01

    BackgroundIntra-arterial brachytherapy with yttrium-90 ("9"0Y) resin microspheres (radioembolization) is a procedure to selectively deliver high-dose radiation to tumors. The purpose of this research was to compare the radioembolic effect of "9"0Y-radioembolization versus the embolic effect of bland microspheres in the porcine kidney model.MethodsIn each of six pigs, ~25–33 % of the kidney volume was embolized with "9"0Y resin microspheres and an equivalent number of bland microspheres in the contralateral kidney. Kidney volume was estimated visually from contrast-enhanced fluoroscopy imaging. Morphologic and histologic analysis was performed 8–9 weeks after the procedure to assess the locations of the microspheres and extent of tissue necrosis from "9"0Y-radioembolization and bland embolization. A semi-quantified evaluation of the non-acute peri-particle and perivascular tissue reaction was conducted. All guidelines for the care and use of animals were followed.ResultsKidneys embolized with "9"0Y-radioembolization decreased in mass by 30–70 % versus the contralateral kidney embolized with bland microspheres. These kidneys showed significant necrosis/fibrosis, avascularization, and glomerular atrophy in the immediate vicinity of the "9"0Y resin microspheres. By contrast, glomerular changes were not observed, even with clusters of bland microspheres in afferent arterioles. Evidence of a foreign body reaction was recorded in some kidneys with bland microspheres, and subcapsular scarring/infarction only with the highest load (4.96 × 10"6) of bland microspheres.ConclusionThis study showed that radioembolization with "9"0Y resin microspheres produces localized necrosis/fibrosis and loss of kidney mass in a porcine kidney model. This result supports the study of "9"0Y resin microspheres for the localized treatment of kidney tumors.

  1. Preparation and characterization of monodisperse large-porous silica microspheres as the matrix for protein separation.

    Science.gov (United States)

    Xia, Hongjun; Wan, Guangping; Zhao, Junlong; Liu, Jiawei; Bai, Quan

    2016-11-04

    High performance liquid chromatography (HPLC) is a kind of efficient separation technology and has been used widely in many fields. Micro-sized porous silica microspheres as the most popular matrix have been used for fast separation and analysis in HPLC. In this paper, the monodisperse large-porous silica microspheres with controllable size and structure were successfully synthesized with polymer microspheres as the templates and characterized. First, the poly(glycidyl methacrylate-co-ethyleneglycol dimethacrylate) microspheres (P GMA-EDMA ) were functionalized with tetraethylenepentamine (TEPA) to generate amino groups which act as a catalyst in hydrolysis of tetraethyl orthosilicate (TEOS) to form Si-containing low molecular weight species. Then the low molecular weight species diffused into the functionalized P GMA-EDMA microspheres by induction force of the amino groups to form polymer/silica hybrid microspheres. Finally, the organic polymer templates were removed by calcination, and the large-porous silica microspheres were obtained. The compositions, morphology, size distribution, specific surface area and pore size distribution of the porous silica microspheres were characterized by infrared analyzer, scanning-electron microscopy, dynamic laser scattering, the mercury intrusion method and thermal gravimetric analysis, respectively. The results show that the agglomeration of the hybrid microspheres can be overcome when the templates were functionalized with TEPA as amination reagent, and the yield of 95.7% of the monodisperse large-porous silica microspheres can be achieved with high concentration of polymer templates. The resulting large-porous silica microspheres were modified with octadecyltrichlorosilane (ODS) and the chromatographic evaluation was performed by separating the proteins and the digest of BSA. The baseline separation of seven kinds of protein standards was achieved, and the column delivered a better performance when separating BSA digests

  2. Facile Fabrication of Urchin-like Polyaniline Microspheres for Electrochemical Energy Storage

    International Nuclear Information System (INIS)

    Wang, Yuan; Xu, Shaoqin; Liu, Wenfeng; Cheng, Huan; Chen, Shaoyun; Liu, Xueqing; Liu, Jiyan; Tai, Qidong; Hu, Chenglong

    2017-01-01

    Graphical abstract: The urchin-like polyaniline (i.e. PANI) microsphere was polymerized using the sulfonated polystyrene microspheres (i.e. SPS) as template. It showed large specific capacitance of 435 F g −1 at a scan rate of 10 mV s −1 , and also exhibited the good rate capability and the cycling stability with capacitance retentions of 93% after 1000 cycles. This facile approach is feasible and easy to fabricate microstructural conducting polymer for supercapacitor electrode materials. Display Omitted -- Highlights: •A novel route to fabricate urchin-like polyaniline (PANI) by polymeric template. •The specific capacitance of 435 Fg 1 was obtained when PANI acted as the electrode. •The cycling stability with capacitance retentions of 93% after 1000 cycles. -- Abstract: The urchin-like polyaniline (i.e. PANI) microsphere was polymerized using the sulfonated polystyrene microsphere (i.e. SPS) as template, and its structure was successfully conformed by the X-ray photoelectron spectrum, Raman spectrum, Ultraviolet-visible spectrum, and TGA thermogram. The urchin-like PANI microspheres with uniform diameter (1.5 μm) can be observed on scanning electron microscopy (SEM). Cyclic voltammetry and galvanostatic charge/discharge tests were carried out to investigate the electrochemical properties of as-prepared urchin-like PANI microspheres. It showed that the specific capacitance (SC) was 435 Fg −1 at a scan rate of 10 mV s −1 , and also exhibited good capability and cycling stability with capacitance retentions of 93% after 1000 cycles, which is superior or close to some individual PANI nanostructures and PANI composite materials. This facile approach is feasible and easy to fabricate microstructural conducting polymer for supercapacitor electrode materials.

  3. Ceramic microspheres for cementing applications

    NARCIS (Netherlands)

    2011-01-01

    A method and apparatus for manufacturing ceramic microspheres from industrial slag. The microspheres have a particle size of about 38 microns to about 150 microns. The microspheres are used to create a cement slurry having a density of at least about 11 lbs/g. The resultant cement slurry may then be

  4. Ceramic microspheres for cementing applications

    NARCIS (Netherlands)

    2010-01-01

    A method and apparatus for manufacturing ceramic microspheres from industrial slag. The microspheres have a particle size of about 38 microns to about 150 microns. The microspheres are used to create a cement slurry having a density of at least about 11 lbs/g. The resultant cement slurry may then be

  5. Ceramic microspheres for cementing applications

    NARCIS (Netherlands)

    2012-01-01

    A method and apparatus for manufacturing ceramic microspheres from industrial slag. The microspheres have a particle size of about 38 microns to about 150 microns. The microspheres are used to create a cement slurry having a density of at least about 11 lbs/g. The resultant cement slurry may then be

  6. Coherent inflation for large quantum superpositions of levitated microspheres

    Science.gov (United States)

    Romero-Isart, Oriol

    2017-12-01

    We show that coherent inflation (CI), namely quantum dynamics generated by inverted conservative potentials acting on the center of mass of a massive object, is an enabling tool to prepare large spatial quantum superpositions in a double-slit experiment. Combined with cryogenic, extreme high vacuum, and low-vibration environments, we argue that it is experimentally feasible to exploit CI to prepare the center of mass of a micrometer-sized object in a spatial quantum superposition comparable to its size. In such a hitherto unexplored parameter regime gravitationally-induced decoherence could be unambiguously falsified. We present a protocol to implement CI in a double-slit experiment by letting a levitated microsphere traverse a static potential landscape. Such a protocol could be experimentally implemented with an all-magnetic scheme using superconducting microspheres.

  7. Effects of co-treatment with mirtazapine and low doses of risperidone on immobility time in the forced swimming test in mice.

    Science.gov (United States)

    Rogóż, Zofia

    2010-01-01

    The aim of the present study was to examine the effect of mirtazapine (MIR) and risperidone (an atypical antipsychotic drug), given separately or jointly, on immobility time in the forced swimming test in male C57BL/6J mice. Fluoxetine (FLU) was used as a reference drug. MIR (2.5, 5 and 10 mg/kg) and FLU (5 and 10 mg/kg), or risperidone in low doses (0.05 and 0.1 mg/kg) given alone did not change the immobility time of mice in the forced swimming test. Joint administration of MIR (5 and 10 mg/kg) or FLU (10 mg/kg) and risperidone (0.1 mg/kg) produced antidepressant-like activity in the forced swimming test. WAY100636 (a 5-HT(1A) receptor antagonist) inhibited, while yohimbine (an α(2)-adrenergic receptor antagonist) potentiated the antidepressant-like effect induced by co-administration of MIR and risperidone. Active behavior in that test did not reflect an increase in general activity, since combined administration of antidepressants and risperidone failed to enhance the locomotor activity of mice. The obtained results indicate that risperidone applied in a low dose enhances the antidepressant-like activity of MIR and that, among other mechanisms, 5-HT(1A)-, and α(2)-adrenergic receptors may play a role in this effect.

  8. Electrospray synthesis and properties of hierarchically structured PLGA TIPS microspheres for use as controlled release technologies.

    Science.gov (United States)

    Malik, Salman A; Ng, Wing H; Bowen, James; Tang, Justin; Gomez, Alessandro; Kenyon, Anthony J; Day, Richard M

    2016-04-01

    Microsphere-based controlled release technologies have been utilized for the long-term delivery of proteins, peptides and antibiotics, although their synthesis poses substantial challenges owing to formulation complexities, lack of scalability, and cost. To address these shortcomings, we used the electrospray process as a reproducible, synthesis technique to manufacture highly porous (>94%) microspheres while maintaining control over particle structure and size. Here we report a successful formulation recipe used to generate spherical poly(lactic-co-glycolic) acid (PLGA) microspheres using the electrospray (ES) coupled with a novel thermally induced phase separation (TIPS) process with a tailored Liquid Nitrogen (LN2) collection scheme. We show how size, shape and porosity of resulting microspheres can be controlled by judiciously varying electrospray processing parameters and we demonstrate examples in which the particle size (and porosity) affect release kinetics. The effect of electrospray treatment on the particles and their physicochemical properties are characterized by scanning electron microscopy, confocal Raman microscopy, thermogravimetric analysis and mercury intrusion porosimetry. The microspheres manufactured here have successfully demonstrated long-term delivery (i.e. 1week) of an active agent, enabling sustained release of a dye with minimal physical degradation and have verified the potential of scalable electrospray technologies for an innovative TIPS-based microsphere production protocol. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

  9. Comparative study on clinically latent aggressiveness inoutpatients with schizophrenia treated with classical antipsychotics and with risperidone

    Directory of Open Access Journals (Sweden)

    Konstantinos Tsirigotis

    2014-03-01

    Full Text Available Objective: The use of neuroleptics causes not only regression of psychotic symptoms; neuroleptics affect also the patients’ mental state which is changing not only due to medications effects but also secondarily, as a result of regression of psychotic symptoms. The aim of this study was evaluation of subjectively felt “silent” (clinically latent hostility and aggressiveness in patients with paranoid schizophrenia treated with typical neuroleptics and risperidone. Material and methods: Sixty patients (30 patients treated with typical neuroleptics and the other 30 – with risperidone were examined with the Polish version of the following tools: Minnesota Multiphasic Personality Inventory (MMPI, Adjective Check List (ACL and Stern Activities Index (SAI. Results: The statistical analysis of the obtained results yielded many statistically significant differences within the intensity of hostility and aggressiveness in the examined groups. Conclusions: The results of this study showed a higher severity of psychological and personality problems in patients treated with typical neuroleptics, as compared to those treated with risperidone. In patients with paranoid schizophrenia treated with risperidone a lower severity of psychopathological, especially schizophrenic and paranoid, symptoms and lower hostility and aggressiveness were found. Considering that risperidone improves verbal functions, it can be assumed that this entails an improvement in the patients’ communicative competences, thereby improving also their interpersonal relationships. The results of this study indicate a higher susceptibility of people in this group to social influences and less hostility and negativity experienced by them.

  10. Successful treatment with risperidone increases 5-HT 3A receptor gene expression in patients with paranoid schizophrenia - data from a prospective study.

    Science.gov (United States)

    Chen, Hongying; Fan, Yong; Zhao, Lei; Hao, Yong; Zhou, Xiajun; Guan, Yangtai; Li, Zezhi

    2017-09-01

    The relationship between peripheral 5-HT3A receptor mRNA level and risperidone efficiency in paranoid schizophrenia patients is still unknown. A total 52 first-episode and drug-naive paranoid schizophrenia patients who were treated with risperidone and 53 matched healthy controls were enrolled. Patients were naturalistically followed up for 8 weeks. Positive and Negative Syndrome Scale (PANSS) was applied to assess symptom severity of the patients at baseline and at the end of 8th week. There was no difference in 5-HT3A receptor mRNA level between paranoid schizophrenia patients and healthy controls at baseline ( p  = .24). Among 47 patients who completed 8-week naturalistic follow-up, 37 were responders to risperidone treatment. 5-HT3A receptor mRNA level of paranoid schizophrenia patients did not change in overall patients after 8-week treatment with risperidone ( p  = .29). However, 5-HT3A receptor mRNA level in responders increased significantly ( p  = .04), but not in nonresponders ( p  = .81). Successful treatment with risperidone increases 5-HT3A receptor gene expression in patients with paranoid schizophrenia, indicating that 5-HT3A receptor may be involved in the mechanism of risperidone effect.

  11. Haloperidol, risperidone, olanzapine and aripiprazole in the management of delirium: A comparison of efficacy, safety, and side effects.

    Science.gov (United States)

    Boettger, Soenke; Jenewein, Josef; Breitbart, William

    2015-08-01

    The aim of this study was to compare the efficacy and side-effect profile of the typical antipsychotic haloperidol with that of the atypical antipsychotics risperidone, olanzapine, and aripiprazole in the management of delirium. The Memorial Delirium Assessment Scale (MDAS), the Karnofsky Performance Status (KPS) scale, and a side-effect rating were recorded at baseline (T1), after 2-3 days (T2), and after 4-7 days (T3). Some 21 cases were case-matched by age, preexisting dementia, and baseline MDAS scores, and subsequently analyzed. The baseline characteristics of the medication groups were not different: The mean age of the patients ranged from 64.0 to 69.6 years, dementia was present in between 23.8 and 28.6%, and baseline MDAS scores were 19.9 (haloperidol), 18.6 (risperidone), 19.4 (olanzapine), and 18.0 (aripiprazole). The doses of medication at T3 were 5.5 mg haloperidol, 1.3 mg risperidone, 7.1 mg olanzapine, and 18.3 mg aripiprazole. Over one week, the decline in MDAS scores between medications was equal, and no differences between individual MDAS scores existed at T2 or T3. After one week, the MDAS scores were 6.8 (haloperidol), 7.1 (risperidone), 11.7 (olanzapine), and 8.3 (aripiprazole). At T2, delirium resolution occurred in 42.9-52.4% of cases and at T3 in 61.9-85.7%; no differences in assessments between medications existed. Recorded side effects were extrapyramidal symptoms (EPSs) in haloperidol- and risperidone-managed patients (19 and 4.8%, respectively) and sedation with olanzapine (28.6%). Haloperidol, risperidone, aripiprazole, and olanzapine were equally effective in the management of delirium; however, they differed in terms of their side-effect profile. Extrapyramidal symptoms were most frequently recorded with haloperidol, and sedation occurred most frequently with olanzapine.

  12. A comparison of low-dose risperidone to paroxetine in the treatment of panic attacks: a randomized, single-blind study

    Directory of Open Access Journals (Sweden)

    Galynker Igor I

    2009-05-01

    Full Text Available Abstract Background Because a large proportion of patients with panic attacks receiving approved pharmacotherapy do not respond or respond poorly to medication, it is important to identify additional therapeutic strategies for the management of panic symptoms. This article describes a randomized, rater-blind study comparing low-dose risperidone to standard-of-care paroxetine for the treatment of panic attacks. Methods Fifty six subjects with a history of panic attacks were randomized to receive either risperidone or paroxetine. The subjects were then followed for eight weeks. Outcome measures included the Panic Disorder Severity Scale (PDSS, the Hamilton Anxiety Scale (Ham-A, the Hamilton Depression Rating Scale (Ham-D, the Sheehan Panic Anxiety Scale-Patient (SPAS-P, and the Clinical Global Impression scale (CGI. Results All subjects demonstrated a reduction in both the frequency and severity of panic attacks regardless of treatment received. Statistically significant improvements in rating scale scores for both groups were identified for the PDSS, the Ham-A, the Ham-D, and the CGI. There was no difference between treatment groups in the improvement in scores on the measures PDSS, Ham-A, Ham-D, and CGI. Post hoc tests suggest that subjects receiving risperidone may have a quicker clinical response than subjects receiving paroxetine. Conclusion We can identify no difference in the efficacy of paroxetine and low-dose risperidone in the treatment of panic attacks. Low-dose risperidone appears to be tolerated equally well as paroxetine. Low-dose risperidone may be an effective treatment for anxiety disorders in which panic attacks are a significant component. Trial Registration ClinicalTrials.gov Identifier: NCT100457106

  13. Long-acting reversible hormonal contraception

    African Journals Online (AJOL)

    Abstract. Long-acting reversible hormonal contraceptives are effective methods of birth control that provide contraception for an extended ... The World Health Organization (WHO) has online tools available .... trials and marketing experience.

  14. PLGA/alginate composite microspheres for hydrophilic protein delivery

    International Nuclear Information System (INIS)

    Zhai, Peng; Chen, X.B.; Schreyer, David J.

    2015-01-01

    Poly(lactic-co-glycolic acid) (PLGA) microspheres and PLGA/alginate composite microspheres were prepared by a novel double emulsion and solvent evaporation technique and loaded with bovine serum albumin (BSA) or rabbit anti-laminin antibody protein. The addition of alginate and the use of a surfactant during microsphere preparation increased the encapsulation efficiency and reduced the initial burst release of hydrophilic BSA. Confocal laser scanning microcopy (CLSM) of BSA-loaded PLGA/alginate composite microspheres showed that PLGA, alginate, and BSA were distributed throughout the depths of microspheres; no core/shell structure was observed. Scanning electron microscopy revealed that PLGA microspheres erode and degrade more quickly than PLGA/alginate composite microspheres. When loaded with anti-laminin antibody, the function of released antibody was well preserved in both PLGA and PLGA/alginate composite microspheres. The biocompatibility of PLGA and PLGA/alginate microspheres were examined using four types of cultured cell lines, representing different tissue types. Cell survival was variably affected by the inclusion of alginate in composite microspheres, possibly due to the sensitivity of different cell types to excess calcium that may be released from the calcium cross-linked alginate. - Highlights: • A double emulsion technique is used to prepare protein-loaded PLGA or PLGA/alginate microspheres. • PLGA, alginate and protein are distributed evenly within microsphere structure. • Addition of alginate improves loading efficiency and slows degradation and protein release. • PLGA/alginate microspheres have favorable biocompatibility

  15. PLGA/alginate composite microspheres for hydrophilic protein delivery

    Energy Technology Data Exchange (ETDEWEB)

    Zhai, Peng [Department of Anatomy and Cell Biology, University of Saskatchewan, S7N5E5 (Canada); Division of Biomedical Engineering, University of Saskatchewan, S7N5A9 (Canada); Chen, X.B. [Department of Mechanical Engineering, University of Saskatchewan, S7N5A9 (Canada); Division of Biomedical Engineering, University of Saskatchewan, S7N5A9 (Canada); Schreyer, David J., E-mail: david.schreyer@usask.ca [Department of Anatomy and Cell Biology, University of Saskatchewan, S7N5E5 (Canada); Division of Biomedical Engineering, University of Saskatchewan, S7N5A9 (Canada)

    2015-11-01

    Poly(lactic-co-glycolic acid) (PLGA) microspheres and PLGA/alginate composite microspheres were prepared by a novel double emulsion and solvent evaporation technique and loaded with bovine serum albumin (BSA) or rabbit anti-laminin antibody protein. The addition of alginate and the use of a surfactant during microsphere preparation increased the encapsulation efficiency and reduced the initial burst release of hydrophilic BSA. Confocal laser scanning microcopy (CLSM) of BSA-loaded PLGA/alginate composite microspheres showed that PLGA, alginate, and BSA were distributed throughout the depths of microspheres; no core/shell structure was observed. Scanning electron microscopy revealed that PLGA microspheres erode and degrade more quickly than PLGA/alginate composite microspheres. When loaded with anti-laminin antibody, the function of released antibody was well preserved in both PLGA and PLGA/alginate composite microspheres. The biocompatibility of PLGA and PLGA/alginate microspheres were examined using four types of cultured cell lines, representing different tissue types. Cell survival was variably affected by the inclusion of alginate in composite microspheres, possibly due to the sensitivity of different cell types to excess calcium that may be released from the calcium cross-linked alginate. - Highlights: • A double emulsion technique is used to prepare protein-loaded PLGA or PLGA/alginate microspheres. • PLGA, alginate and protein are distributed evenly within microsphere structure. • Addition of alginate improves loading efficiency and slows degradation and protein release. • PLGA/alginate microspheres have favorable biocompatibility.

  16. Long-term use of short- and long-acting nitrates in stable angina pectoris.

    Science.gov (United States)

    Kosmicki, Marek Antoni

    2009-05-01

    Long-acting nitrates are effective antianginal drugs during initial treatment. However, their therapeutic value is compromised by the rapid development of tolerance during sustained therapy, which means that their clinical efficacy is decreased during long-term use. Sublingual nitroglycerin (NTG), a short-acting nitrate, is suitable for the immediate relief of angina. In patients with stable angina treated with oral long-acting nitrates, NTG maintains its full anti-ischemic effect both after initial oral ingestion and after intermittent long-term oral administration. However, NTG attenuates this effect during continuous treatment, when tolerance to oral nitrates occurs, and this is called cross-tolerance. In stable angina long-acting nitrates are considered third-line therapy because a nitrate-free interval is required to avoid the development of tolerance. Nitrates vary in their potential to induce the development of tolerance. During long-lasting nitrate therapy, except pentaerythritol tetranitrate (PETN), one can observe the development of reactive oxygen species (ROS) inside the muscular cell of a vessel wall, and these bind with nitric oxide (NO). This leads to decreased NO activity, thus, nitrate tolerance. PETN has no tendency to form ROS, and therefore during long-term PETN therapy, there is probably no tolerance or cross-tolerance, as during treatment with other nitrates.

  17. Pt supported self-assembled nest-like-porous WO3 hierarchical microspheres as electrocatalyst for methanol oxidation

    International Nuclear Information System (INIS)

    Zhang, Jun; Tu, Jiang-ping; Du, Gao-hui; Dong, Zi-min; Su, Qing-mei; Xie, Dong; Wang, Xiu-li

    2013-01-01

    Highlights: ► Nest-like-porous (NLP) WO 3 microspheres are assembled by a hydrothermal method. ► The NLP-WO 3 microspheres have a hexagonal structure and high porous surface. ► Great enhancement of electrochemical property is achieved for Pt/NLP-WO 3 microspheres. -- Abstract: Hexagonal tungsten trioxide (hex-WO 3 ) hierarchical microspheres with nest-like pores are synthesized by a facile hydrothermal method. The nest-like-porous (NLP) WO 3 hierarchical microspheres with 5–6 μm in diameters are self-assembled of single-crystal nanowires. The nanowires have lengths of several hundred nanometers and diameters of 5–30 nm; the long axis of nanowire is oriented toward 〈0 0 1〉 direction. The specific surface area of hex-WO 3 microspheres is 62 m 2 g −1 . 20 wt.% Pt nanoparticles with ∼7 nm are loaded onto the WO 3 microspheres using a conventional microwave-assisted ethylene glycol (EG) method. The electrocatalytic activity for methanol oxidation of Pt/NLP-WO 3 microspheres is investigated by cyclic voltammetry and chronoamperometry. Due to the large tunnels of hexagonal structure and high porous surface morphology, great enhancement of electrochemical performance is achieved. The Pt/NLP-WO 3 microspheres are demonstrated to be a promising anode material for direct methanol fuel cells (DMFC)

  18. Bronchodilator treatment of stable COPD: long-acting anticholinergics

    Directory of Open Access Journals (Sweden)

    W. Vincken

    2005-09-01

    Full Text Available Since airflow obstruction in chronic obstructive pulmonary disease (COPD is to some extent reversible, bronchodilators play an important role in the maintenance treatment of COPD the more they reduce hyperinflation and, as a result, improve dyspnoea and exercise capacity. Since parasympathetic activity is the dominant reversible component of airflow obstruction in COPD, inhaled short-acting anticholinergic agents (SAAC, in particular ipratropium, became an efficient and safe first-line treatment, especially when combined with a short-acting beta2-adrenergic receptor agonist. Even better results were obtained when combining the SAAC ipratropium to a long-acting beta2-adrenergic receptor agonist (LABA, once they became available. Recently, tiotropium bromide, the first of a new class of selective and long-acting anticholinergic agents was introduced for once-daily maintenance treatment of COPD patients. Several large long-term randomised clinical trials comparing tiotropium to placebo as well as to the SAAC ipratropium and the LABA salmeterol, have confirmed the long-acting and superior bronchodilator effect of tiotropium without any evidence of drug tolerance developing. These studies also have clearly demonstrated that tiotropium positively affects several other important health outcomes, such as dyspnoea sensation, exercise capacity, utilisation of rescue bronchodilators, health-related quality of life, COPD exacerbations and hospitalisations because of exacerbations. The improvement in these real-life outcomes appears related to the reduction in both static and dynamic hyperinflation. In all these studies, tiotropium was well tolerated and safe; the only relevant side-effect encountered being dry mouth, usually mild and often transitory. Finally, it has been shown that the combination of tiotropium with a LABA affords superior bronchodilatation than both agents alone, indicating that both classes of long-acting bronchodilators should be

  19. Hydrogen transport and storage in engineered glass microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Rambach, G.D.

    1994-04-20

    New, high-strength, hollow, glass microspheres filled with pressurized hydrogen exhibit storage densities which make them attractive for bulk hydrogen storage and transport. The hoop stress at failure of our engineered glass microspheres is about 150,000 psi, permitting a three-fold increase in pressure limit and storage capacity above commercial microspheres, which fail at wall stresses of 50,000 psi. For this project, microsphere material and structure will be optimized for storage capacity and charge/discharge kinetics to improve their commercial practicality. Microsphere production scale up will be performed, directed towards large-scale commercial use. Our analysis relating glass microspheres for hydrogen transport with infrastructure and economics` indicate that pressurized microspheres can be economically competitive with other forms of bulk rail and truck transport such as hydride beds, cryocarbons and pressurized tube transports. For microspheres made from advanced materials and processes, analysis will also be performed to identify the appropriate applications of the microspheres considering property variables, and different hydrogen infrastructure, end use, production and market scenarios. This report presents some of the recent modelling results for large beds of glass microspheres in hydrogen storage applications. It includes plans for experiments to identify the properties relevant to large-bed hydrogen transport and storage applications, of the best, currently producible, glass microspheres. This work began in March, 1994. Project successes will be manifest in the matching of cur-rent glass microspheres with a useful application in hydrogen bulk transport and storage, and in developing microsphere materials and processes that increase the storage density and reduce the storage energy requirement.

  20. Sustained safety and efficacy of extended-shelf-life {sup 90}Y glass microspheres: long-term follow-up in a 134-patient cohort

    Energy Technology Data Exchange (ETDEWEB)

    Lewandowski, Robert J.; Minocha, Jeet; Memon, Khairuddin; Riaz, Ahsun; Gates, Vanessa L.; Ryu, Robert K.; Sato, Kent T.; Omary, Reed; Salem, Riad [Northwestern University, Department of Radiology, Chicago, IL (United States)

    2014-03-15

    To validate our initial pilot study and confirm sustained safety and tumor response of extended-shelf-life {sup 90}Y glass microspheres. We hypothesized that for the same planned tissue dose, the increase in number of glass microspheres (decayed to the second week of their allowable shelf-life) administered for the same absorbed dose would result in better tumor distribution of the microspheres without causing additional adverse events. Between June 2007 and January 2010, 134 patients underwent radioembolization with extended-shelf-life {sup 90}Y glass microspheres; data from 84 new patients were combined with data from our 50-patient pilot study cohort. Baseline and follow-up imaging and laboratory data were obtained 1 and 3 months after therapy and every 3 months thereafter. Clinical and biochemical toxicities were prospectively captured and categorized according to the Common Terminology Criteria. Response in the index lesion was assessed using WHO and EASL guidelines. The mean delivered radiation dose was 123 Gy to the target liver tissue. The mean increase in number of microspheres with this approach compared to standard {sup 90}Y glass microsphere dosimetry was 103 %, corresponding to an increase from 3.84 to 7.78 million microspheres. Clinical toxicities included fatigue (89 patients, 66 %), abdominal pain (49 patients, 36.6 %), and nausea/vomiting (25 patients, 18.7 %). Grade 3/4 bilirubin toxicity was seen in three patients (2 %). Two (1 %) of the initial 50-patient cohort showed gastroduodenal ulcers; gastroduodenal ulcers were not seen in any of the subsequent 84 patients. According to WHO and EASL guidelines, response rates were 48 % and 57 %, respectively, and 21 % demonstrated a complete EASL response. This study showed sustained safety and efficacy of extended-shelf-life {sup 90}Y glass microspheres in a larger, 134-patient cohort. The increase in number of microspheres administered theoretically resulted in better tumor distribution of the

  1. Temperature influence in crystallinity of polymer microspheres

    International Nuclear Information System (INIS)

    Rezende, Cristiane de P.; Novack, Katia M.

    2011-01-01

    Drug delivery technology is evolving through the creation of new techniques of drug delivery effectively. The new methods used in drugs administration are based in microencapsulation process. Microsphere encapsulation modifies drug delivery bringing benefits and efficiency. In this work has been evaluated the influence of temperature in microspheres preparation. Microspheres were obtained by PMMA-co-PEG (COP) copolymer with indomethacin inserted in polymer matrix. Samples were characterized by SEM, DSC and XRD. SEM micrographs confirmed the formation of different sizes of microspheres and it was verified that higher temperatures make more crystalline microspheres. (author)

  2. Preparation and Biological Evaluation of Radioiodinated Risperidone and Lamotrigine as Models for Brain Imaging

    International Nuclear Information System (INIS)

    Saddar, E.; El-Tawoosy, M.; Motaleb, H.A.

    2014-01-01

    Brain imaging technology is becoming an important tool in both research and clinical care. Due to the sensitivity of brain imaging technology, neuroscientists are able to visualize brain structure and function from the level of individual molecules to the whole brain, recognize and diagnose neurological disorders, develop new strategies for treatment and determine how therapies work. The study aimed to take advantages from drugs that are able to cross the brain barrier for the development of potential radiopharmaceuticals for non-invasive brain imaging. Risperidone and lamotrigine were successfully labeled with 125 I via direct electrophilic substitution reaction at 80 degree C. The reaction parameters affecting the preparation process were studied. 125 I-risperidone and 125 I-lamotrigine gave maximum labeling yield of 89 % ± 3.75 and 97.5 % ± 1.0 %, respectively and their stability were up to 6 and 24 h, respectively. Biodistribution studies showed that maximum uptake of 125 I-risperidone and 125 I-lamotrigine in the brain of mice were 4.27 % ± 0.38 and 2.45 % ± 0.18 of the injected activity/g tissue organ, at 10

  3. Long-acting reversible contraceptives: intrauterine devices and the contraceptive implant.

    Science.gov (United States)

    Espey, Eve; Ogburn, Tony

    2011-03-01

    The provision of effective contraception is fundamental to the practice of women's health care. The most effective methods of reversible contraception are the so-called long-acting reversible contraceptives, intrauterine devices and implants. These methods have multiple advantages over other reversible methods. Most importantly, once in place, they do not require maintenance and their duration of action is long, ranging from 3 to 10 years. Despite the advantages of long-acting reversible contraceptive methods, they are infrequently used in the United States. Short-acting methods, specifically oral contraceptives and condoms, are by far the most commonly used reversible methods. A shift from the use of short-acting methods to long-acting reversible contraceptive methods could help reduce the high rate of unintended pregnancy in the United States. In this review of long-acting reversible contraceptive methods, we discuss the intrauterine devices and the contraceptive implant available in the United States, and we describe candidates for each method, noncontraceptive benefits, and management of complications.

  4. Effect of co-treatment with fluoxetine or mirtazapine and risperidone on the active behaviors and plasma corticosterone concentration in rats subjected to the forced swim test.

    Science.gov (United States)

    Rogóż, Zofia; Kabziński, Marcin; Sadaj, Witold; Rachwalska, Paulina; Gądek-Michalska, Anna

    2012-01-01

    Several clinical reports have postulated a beneficial effect of the addition of a low dose of risperidone to the ongoing treatment with antidepressants in treatment-resistant depression. The present study aimed to examine the effect of treatment with fluoxetine or mirtazapine, given separately or jointly with risperidone, on active behavior and plasma corticosterone level in male Wistar rats subjected to the forced swim test (FST). The obtained results showed that fluoxetine (5 mg/kg), mirtazapine (5 and 10 mg/kg) or risperidone (0.05 and 0.1 mg/kg) did not change the active behavior of rats in the FST. However, co-treatment with fluoxetine (10 mg/kg) and risperidone (0.1 mg/kg) induced an antidepressant-like effect in that test because it significantly increased the swimming time and decreased the immobility time, while combined treatment with mirtazapine at 5 and 10 mg/kg and risperidone at 0.05 and 0.1 mg/kg evoked a significant increase in the swimming time and also climbing, and decreased the immobility time. WAY 100635 (a 5-HT(1A) receptor antagonist) at a dose of 0.1 mg/kg inhibited the antidepressant-like effect induced by co-administration of fluoxetine or mirtazapine and risperidone. Active behavior in that test did not reflect an increase in general activity, since combined treatment with fluoxetine or mirtazapine and risperidone failed to enhance the exploratory activity of rats. Co-treatment with fluoxetine or mirtazapine and risperidone did not reduce the stress-induced increase in plasma corticosterone concentration in animals subjected to the FST. The obtained results indicate that risperidone applied in a low dose enhances the antidepressant-like activity of fluoxetine and mirtazapine in the FST (but does not normalize the stress-induced increase in corticosterone level in these rats), and that 5-HT(1A) receptors may play some role in these effects.

  5. Effect of switching to risperidone after unsuccessful treatment with aripiprazole on plasma monoamine metabolites level in the treatment of acute schizophrenia.

    Science.gov (United States)

    Miura, Itaru; Takeuchi, Satoshi; Katsumi, Akihiko; Kanno, Keiko; Watanabe, Kenya; Mashiko, Hirobumi; Niwa, Shin-Ichi

    2012-09-01

    In the treatment of acute schizophrenia, risperidone and aripiprazole are both placed the first line antipsychotics. These two antipsychotics have different pharmacological effects. We investigated the effects of risperidone on plasma levels of homovanillic acid (HVA) and 3-methoxy-4hydroxyphenylglycol after unsuccessful aripiprazole treatment in acute schizophrenia. Ten Japanese patients with acute schizophrenia were enrolled to this study. Plasma levels of monoamine metabolites were analyzed with high-performance liquid chromatography with electrochemical detection. Risperidone improved the symptoms and 4 of 10 patients were responders. Risperidone showed a tendency to decrease plasma HVA (pHVA) levels in responders (p = 0.068), but not in non-responders (p = 1.0). At baseline, pHVA levels of responders were significantly higher than that of non-responders (p = 0.033). A trend for negative correlation was found between pHVA at baseline and the changes in Positive and Negative Syndrome Scale-Total (p = 0.061, r = -0.61). Our results suggest that high pHVA level before switching may predict good response to the second line antipsychotics after unsuccessful first antipsychotic treatment. If aripiprazole is not effective in acute schizophrenia, switching to risperidone may be effective and reasonable strategy for improving symptoms. Copyright © 2012 John Wiley & Sons, Ltd.

  6. Simple Synthesis of Molybdenum Disulfide/Reduced Graphene Oxide Composite Hollow Microspheres as Supercapacitor Electrode Material.

    Science.gov (United States)

    Xiao, Wei; Zhou, Wenjie; Feng, Tong; Zhang, Yanhua; Liu, Hongdong; Tian, Liangliang

    2016-09-20

    MoS₂/RGO composite hollow microspheres were hydrothermally synthesized by using SiO₂/GO microspheres as a template, which were obtained via the sonication-assisted interfacial self-assembly of tiny GO sheets on positively charged SiO₂ microspheres. The structure, morphology, phase, and chemical composition of MoS₂/RGO hollow microspheres were systematically investigated by a series of techniques such as FE-SEM, TEM, XRD, TGA, BET, and Raman characterizations, meanwhile, their electrochemical properties were carefully evaluated by CV, GCD, and EIS measurements. It was found that MoS₂/RGO hollow microspheres possessed unique porous hollow architecture with high-level hierarchy and large specific surface area up to 63.7 m²·g -1 . When used as supercapacitor electrode material, MoS₂/RGO hollow microspheres delivered a maximum specific capacitance of 218.1 F·g -1 at the current density of 1 A·g -1 , which was much higher than that of contrastive bare MoS₂ microspheres developed in the present work and most of other reported MoS₂-based materials. The enhancement of supercapacitive behaviors of MoS₂/RGO hollow microspheres was likely due to the improved conductivity together with their distinct structure and morphology, which not only promoted the charge transport but also facilitated the electrolyte diffusion. Moreover, MoS₂/RGO hollow microsphere electrode displayed satisfactory long-term stability with 91.8% retention of the initial capacitance after 1000 charge/discharge cycles at the current density of 3 A·g -1 , showing excellent application potential.

  7. Simple Synthesis of Molybdenum Disulfide/Reduced Graphene Oxide Composite Hollow Microspheres as Supercapacitor Electrode Material

    Directory of Open Access Journals (Sweden)

    Wei Xiao

    2016-09-01

    Full Text Available MoS2/RGO composite hollow microspheres were hydrothermally synthesized by using SiO2/GO microspheres as a template, which were obtained via the sonication-assisted interfacial self-assembly of tiny GO sheets on positively charged SiO2 microspheres. The structure, morphology, phase, and chemical composition of MoS2/RGO hollow microspheres were systematically investigated by a series of techniques such as FE-SEM, TEM, XRD, TGA, BET, and Raman characterizations, meanwhile, their electrochemical properties were carefully evaluated by CV, GCD, and EIS measurements. It was found that MoS2/RGO hollow microspheres possessed unique porous hollow architecture with high-level hierarchy and large specific surface area up to 63.7 m2·g−1. When used as supercapacitor electrode material, MoS2/RGO hollow microspheres delivered a maximum specific capacitance of 218.1 F·g−1 at the current density of 1 A·g−1, which was much higher than that of contrastive bare MoS2 microspheres developed in the present work and most of other reported MoS2-based materials. The enhancement of supercapacitive behaviors of MoS2/RGO hollow microspheres was likely due to the improved conductivity together with their distinct structure and morphology, which not only promoted the charge transport but also facilitated the electrolyte diffusion. Moreover, MoS2/RGO hollow microsphere electrode displayed satisfactory long-term stability with 91.8% retention of the initial capacitance after 1000 charge/discharge cycles at the current density of 3 A·g−1, showing excellent application potential.

  8. Modified microspheres for cleaning liquid wastes from radioactive nuclides

    International Nuclear Information System (INIS)

    Danilin, Lev; Drozhzhin, Valery

    2007-01-01

    An effective solution of nuclear industry problems related to deactivation of technological and natural waters polluted with toxic and radioactive elements is the development of inorganic sorbents capable of not only withdrawing radioactive nuclides, but also of providing their subsequent conservation under conditions of long-term storage. A successful technical approach to creation of sorbents can be the use of hollow aluminosilicate microspheres. Such microspheres are formed from mineral additives during coal burning in furnaces of boiler units of electric power stations. Despite some reduction in exchange capacity per a mass unit of sorbents the latter have high kinetic characteristics that makes it possible to carry out the sorption process both in static and dynamic modes. Taking into account large industrial resources of microspheres as by-products of electric power stations, a comparative simplicity of the modification process, as well as good kinetic and capacitor characteristics, this class of sorbents can be considered promising enough for solving the problems of cleaning liquid radioactive wastes of various pollution levels. (authors)

  9. Hierarchical Mn2O3 Microspheres In-Situ Coated with Carbon for Supercapacitors with Highly Enhanced Performances

    Science.gov (United States)

    Gong, Feilong; Lu, Shuang; Peng, Lifang; Zhou, Jing; Kong, Jinming; Jia, Dianzeng; Li, Feng

    2017-01-01

    Porous Mn2O3 microspheres have been synthesized and in-situ coated with amorphous carbon to form hierarchical C@Mn2O3 microspheres by first producing MnCO3 microspheres in solvothermal reactions, and then annealing at 500 °C. The self-assembly growth of MnCO3 microspheres can generate hollow structures inside each of the particles, which can act as micro-reservoirs to store biomass-glycerol for generating amorphous carbon onto the surfaces of Mn2O3 nanorods consisting of microspheres. The C@Mn2O3 microspheres, prepared at 500 °C, exhibit highly enhanced pseudocapacitive performances when compared to the particles after annealed at 400 °C and 600 °C. Specifically, the C@Mn2O3 microspheres prepared at 500 °C show high specific capacitances of 383.87 F g−1 at current density of 0.5 A g−1, and excellent cycling stability of 90.47% of its initial value after cycling for 5000 times. The asymmetric supercapacitors assembled with C@Mn2O3 microspheres after annealed at 500 °C and activated carbon (AC) show an energy density of up to 77.8 Wh kg−1 at power density of 500.00 W kg−1, and a maximum power density of 20.14 kW kg−1 at energy density of 46.8 Wh kg−1. We can attribute the enhanced electrochemical performances of the materials to their three-dimensional (3D) hierarchical structure in-situ coated with carbon. PMID:29168756

  10. Hierarchical Mn2O3 Microspheres In-Situ Coated with Carbon for Supercapacitors with Highly Enhanced Performances

    Directory of Open Access Journals (Sweden)

    Feilong Gong

    2017-11-01

    Full Text Available Porous Mn2O3 microspheres have been synthesized and in-situ coated with amorphous carbon to form hierarchical C@Mn2O3 microspheres by first producing MnCO3 microspheres in solvothermal reactions, and then annealing at 500 °C. The self-assembly growth of MnCO3 microspheres can generate hollow structures inside each of the particles, which can act as micro-reservoirs to store biomass-glycerol for generating amorphous carbon onto the surfaces of Mn2O3 nanorods consisting of microspheres. The C@Mn2O3 microspheres, prepared at 500 °C, exhibit highly enhanced pseudocapacitive performances when compared to the particles after annealed at 400 °C and 600 °C. Specifically, the C@Mn2O3 microspheres prepared at 500 °C show high specific capacitances of 383.87 F g−1 at current density of 0.5 A g−1, and excellent cycling stability of 90.47% of its initial value after cycling for 5000 times. The asymmetric supercapacitors assembled with C@Mn2O3 microspheres after annealed at 500 °C and activated carbon (AC show an energy density of up to 77.8 Wh kg−1 at power density of 500.00 W kg−1, and a maximum power density of 20.14 kW kg−1 at energy density of 46.8 Wh kg−1. We can attribute the enhanced electrochemical performances of the materials to their three-dimensional (3D hierarchical structure in-situ coated with carbon.

  11. New Modified UPLC/Tandem Mass Spectrometry Method for Determination of Risperidone and Its Active Metabolite 9-Hydroxyrisperidone in Plasma: Application to Dose-Dependent Pharmacokinetic Study in Sprague-Dawley Rats

    Directory of Open Access Journals (Sweden)

    Essam Ezzeldin

    2017-01-01

    Full Text Available Sensitive and specific liquid-chromatography tandem mass spectrometry (UPLC-MS/MS assay has been developed and validated for simultaneous quantification of risperidone (RIS and its active metabolite 9-hydroxyrisperidone (9-OH-RIS in rat plasma using olanzapine (OLA as internal standard (IS. Pharmacokinetics of risperidone and its active metabolite 9-hydroxyrisperidone was compared across different doses (0.3, 1.0, and 6.0 mg/kg. Serial blood sample was collected over a time of 48 hours and analyzed for risperidone and its active metabolite 9-hydroxyrisperidone. The pharmacokinetics parameters including Cmax, tmax, and AUC were determined for risperidone and its active ingredient. The method was linear in the concentration range of 0.2–500 ng/mL for risperidone and 9-OH-risperidone, with coefficients of determination greater than 0.998 and lower limit of quantitation of 0.2 ng/mL. Blood levels of risperidone and its active metabolite were roughly dose-proportional. The method developed herein is simple and rapid and was successfully applied for dose-dependent pharmacokinetic study.

  12. A novel route for synthesis and growth formation of metal oxides microspheres: Insights from V_2O_3 microspheres

    International Nuclear Information System (INIS)

    Zhang, Yifu; Huang, Chi; Meng, Changgong; Hu, Tao

    2016-01-01

    Highly polydisperse V_2O_3 solid microspheres with large specific surface area were successfully synthesized via a facile hydrothermal decomposition of VOC_2O_4 solution. The morphology and composition were characterized by scanning electron microscopy (SEM), Energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). V_2O_3 microspheres display an obvious Mott phase transition at −128.5 °C (cooling curve) and −114.5 °C (heating curve). Some parameters including the reaction temperature, concentration of VOC_2O_4, reaction time, surfactant, H_2C_2O_4 and precursor were briefly discussed to reveal the formation of V_2O_3 microspheres. It was found that the precursor is crucial for the fabrication of microsphere. A self-assembly growth mechanism was suggested to explain the growth process of microspheres and the autogenic CO and CO_2 gas served as the soft templates. Furthermore, this route was developed to synthesize different metal oxides microspheres, and it was found that AlO(OH), Fe_3O_4, Fe_2O_3, Co_3O_4, Cr_2O_3, MoO_2 and WO_3 microspheres were obtained. All the results showed this process was successfully explored as a methodology to synthesize different metal oxides microspheres using the gas as the templates by this facile hydrothermal route. - Highlights: • Highly uniform V_2O_3 solid microspheres were synthesized. • V_2O_3 microspheres display an obvious Mott phase transition. • The autogenic CO and CO_2 gas served as the soft templates for designed synthesis. • AlO(OH), Fe_3O_4, Fe_2O_3, Co_3O_4, Cr_2O_3, MoO_2 and WO_3 microspheres were obtained. • A methodology to synthesize different metal oxides microspheres was developed.

  13. One pot synthesis of Ag nanoparticle modified ZnO microspheres in ethylene glycol medium and their enhanced photocatalytic performance

    International Nuclear Information System (INIS)

    Tian Chungui; Li Wei; Pan Kai; Zhang Qi; Tian Guohui; Zhou Wei; Fu Honggang

    2010-01-01

    Ag nanoparticles (NPs) modified ZnO microspheres (Ag/ZnO microspheres) were prepared by a facile one pot strategy in ethylene glycol (EG) medium. The EG played two important roles in the synthesis: it could act as a reaction media for the formation of ZnO and reduce Ag + to Ag 0 . A series of the characterizations indicated the successful combination of Ag NPs with ZnO microspheres. It was shown that Ag modification could greatly enhance the photocatalytic efficiency of ZnO microspheres by taking the photodegradation of Rhodamine B as a model reaction. With appropriate ratio of Ag and ZnO, Ag/ZnO microspheres showed the better photocatalytic performance than commercial Degussa P-25 TiO 2 . Photoluminescence and surface photovoltage spectra demonstrated that Ag modification could effectively inhibit the recombination of the photoinduced electron and holes of ZnO. This is responsible for the higher photocatalytic activity of Ag/ZnO composites. -- Graphical abstract: A 'one-pot' strategy was developed for preparing the Ag/ZnO microspheres in ethylene glycol. The composites exhibited superior photocatalytic performance for photodegradation of Rhodamine B dye in water. Display Omitted

  14. Magnetic susceptibility characterisation of superparamagnetic microspheres

    Science.gov (United States)

    Grob, David Tim; Wise, Naomi; Oduwole, Olayinka; Sheard, Steve

    2018-04-01

    The separation of magnetic materials in microsystems using magnetophoresis has increased in popularity. The wide variety and availability of magnetic beads has fuelled this drive. It is important to know the magnetic characteristics of the microspheres in order to accurately use them in separation processes integrated on a lab-on-a-chip device. To investigate the magnetic susceptibility of magnetic microspheres, the magnetic responsiveness of three types of Dynabeads microspheres were tested using two different approaches. The magnetophoretic mobility of individual microspheres is studied using a particle tracking system and the magnetization of each type of Dynabeads microsphere is measured using SQUID relaxometry. The magnetic beads' susceptibility is obtained at four different applied magnetic fields in the range of 38-70 mT for both the mobility and SQUID measurements. The susceptibility values in both approaches show a consistent magnetic field dependence.

  15. Method for sizing hollow microspheres

    Science.gov (United States)

    Farnum, E.H.; Fries, R.J.

    1975-10-29

    Hollow Microspheres may be effectively sized by placing them beneath a screen stack completely immersed in an ultrasonic bath containing a liquid having a density at which the microspheres float and ultrasonically agitating the bath.

  16. Dopamine transporter density assessed with [{sup 123}]IPT SPECT before and after risperidone treatment in children with tourette's disorder

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, Young Hoon; Kim, Tae Hoon; Ryu, Won Gee [College of Medicine, Yonsei Univ., Seoul (Korea, Republic of)] [and others

    2004-02-01

    Tourette's disorder (TD), which is characterized by multiple waxing and waning motor tics and one or more vocal tics, is known to be associated with abnormalities in the dopaminergic system. To testify our hypothesis that risperidone would improve tic symptoms of TD patients through the change of the dopaminergic system, we measured the dopamine transporter (DAT) densities between drug-naive children with TD and normal children, and investigated the DAT density before and after treatment with risperidone in drug-naive children with TD, using iodine-123 labelled N-(3-iodopropen-2-yl)-2{beta}-carbomethoxy-3beta-(4-chlorophenyl)tropane ([{sup 123}I]IPT) single photon emission computed tomography (SPECT). [{sup 123I}]IPT SPECT imaging and Yale Global Tic Severity Scale-Korean version (YGTSS-K) for assessing the tic symptom severity were carried out before and after treatment with risperidone for 8 weeks in nine drug-naive children with TD. Eleven normal children also underwent SPECT imaging 2 hours after an intravenous administration of [{sup 123}I]IPT. Drug-naive children with TD had a significantly greater increase in the specific/nonspecific DAT binding ratio of both basal ganglia compared with the normal children. However, no significant difference in the specific/nonspecific DAT binding ratio of the basal ganglia before and after treatment with risperidone in children with TD was found, although tic symptoms were significantly improved with risperidone. These findings suggest that DAT densities are directly associated with the pathophysiology of TD, however, that the effect of risperidone on tic symptoms in children with TD is not attributed to the change of dopaminergic system.

  17. Risperidone and Divalproex Differentially Engage the Fronto-Striato-Temporal Circuitry in Pediatric Mania: A Pharmacological Functional Magnetic Resonance Imaging Study

    Science.gov (United States)

    Pavuluri, Mani N.; Passarotti, Alessandra M.; Fitzgerald, Jacklynn M.; Wegbreit, Ezra; Sweeney, John A.

    2012-01-01

    Objective: The current study examined the impact of risperidone and divalproex on affective and working memory circuitry in patients with pediatric bipolar disorder (PBD). Method: This was a six-week, double-blind, randomized trial of risperidone plus placebo versus divalproex plus placebo for patients with mania (n = 21; 13.6 [plus or minus] 2.5…

  18. In vitro evaluation of biodegradable microspheres with surface-bound ligands.

    Science.gov (United States)

    Keegan, Mark E; Royce, Sara M; Fahmy, Tarek; Saltzman, W Mark

    2006-02-21

    Protein ligands were conjugated to the surface of biodegradable microspheres. These microsphere-ligand conjugates were then used in two in vitro model systems to evaluate the effect of conjugated ligands on microsphere behavior. Microsphere retention in agarose columns was increased by ligands on the microsphere surface specific for receptors on the agarose matrix. In another experiment, conjugating the lectin Ulex europaeus agglutinin 1 to the microsphere surface increased microsphere adhesion to Caco-2 monolayers compared to control microspheres. This increase in microsphere adhesion was negated by co-administration of l-fucose, indicating that the increase in adhesion is due to specific interaction of the ligand with carbohydrate receptors on the cell surface. These results demonstrate that the ligands conjugated to the microspheres maintain their receptor binding activity and are present on the microsphere surface at a density sufficient to target the microspheres to both monolayers and three-dimensional matrices bearing complementary receptors.

  19. The influence of risperidone on attentional functions in children and adolescents with attention-deficit/hyperactivity disorder and co-morbid disruptive behavior disorder.

    Science.gov (United States)

    Günther, Thomas; Herpertz-Dahlmann, Beate; Jolles, Jellemer; Konrad, Kerstin

    2006-12-01

    This study aims to examine the influence of risperidone on various attentional functions, including intensity and selectivity aspects of attention plus inhibitory control in children with attention deficit/hyperactivity disorder (ADHD) with co-morbid Disruptive Behavior Disorders (DBD) and normal IQ. Children with ADHD and DBD, aged 8-15 years, were treated with risperidone (mean daily dose: 1.5 mg; n = 23) and examined with three attentional paradigms before and after a 4-week treatment period. Age- and IQ-matched normal controls (n = 23) were also tested without medication on the same two occasions. No influence of the medication could be detected for any neuropsychological variable, neither as a positive enhancement nor as adverse side effects. However, clinical symptoms of ADHD and DBD assessed on the IOWA Conners Scale significantly improved after the 4-week treatment period. Divergent behavioral and cognitive effects of risperidone on ADHD symptoms were observed, with a significant reduction in behavioral symptoms, whereas no positive treatment effects were found on laboratory tasks of impulsivity. Thus, the cognitive effects of risperidone seem to differ from the cognitive effects of stimulant treatments in children with ADHD + DBD. However, no negative impact of risperidone was observed on attentional functions either, i.e., there was no slowing of cognitive speed.

  20. Different mechanisms of risperidone result in improved interpersonal trust, social engagement and cooperative behavior in patients with schizophrenia compared to trifluoperazine.

    Science.gov (United States)

    Tse, Wai Shing; Wong, Ann Siu Wah; Chan, Fu; Pang, Alfred Hin Tat; Bond, Alyson Jane; Chan, Chau Kiu Raymond

    2016-05-01

    Atypical antipsychotic treatment (e.g. risperidone) has been found to improve social functioning more than standard antipsychotic treatment. However, it is unclear which specific social behaviors are implicated in this improvement. The current study employed an interactive puzzle game to examine how social behaviors contribute to the improvement of social functioning by comparing patients receiving risperidone with those receiving trifluoperazine. Scores on the Positive and Negative Syndrome Scale, executive functioning, and social functioning were obtained from 24 patients with schizophrenia receiving either risperidone (n = 12) or trifluoperazine (n = 12), before their social behavior was measured in the interactive Tangrams Game. Immediately after the Tangrams Game, participants filled in two questionnaires measuring their interpersonal trust and rejection toward their game partner. Patients receiving risperidone showed more social engagement, cooperative behavior and interpersonal trust toward their game partners than those receiving trifluoperazine. Additional multivariate analysis of variance revealed that lower affiliative behavior was a function of positive symptoms; interpersonal trust had an impact on social engagement but executive functioning did not explain lower interpersonal trust or social disengagement. Improvement of social competence by risperidone might be related to the enhancement of both social behaviors and interpersonal trust as well as better symptom resolution. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

  1. Clozapine usage increases the incidence of pneumonia compared with risperidone and the general population: a retrospective comparison of clozapine, risperidone, and the general population in a single hospital over 25 months.

    Science.gov (United States)

    Stoecker, Zachary R; George, Wales T; O'Brien, Jeffrey B; Jancik, Jon; Colon, Eduardo; Rasimas, Joseph J

    2017-05-01

    The aim of this study was to determine whether the incidence of pneumonia in patients taking clozapine was more frequent compared with those taking risperidone or no atypical antipsychotics at all before admission to a tertiary care medical center. This was a retrospective, case-matched study of 465 general medicine patients over a 25 month period from 1 July 2010 to 31 July 2012. Detailed electronic medical records were analyzed to explore the association between the use of two atypical antipsychotics and incidence of pneumonia. Of the 155 patients in the clozapine group, 54 (34.8%) had documented pneumonia compared with 22 (14.2%) in the risperidone group and 18 (11.6%) in the general population group. Clozapine, when compared with the untreated general population, was associated with an increased risk of pneumonia (odds ratio=4.07; 95% confidence interval=2.25-7.36). There was, however, no significant increase in the risk of pneumonia associated with the use of risperidone (odds ratio=1.26; 95% confidence interval=0.65-2.45). Clozapine use is associated with increased risk of pneumonia that may be related to immunologic factors or side effects of sedation and drooling that make aspiration more likely, although causative mechanisms require further investigation. These findings suggest that providers should use added caution in choosing candidates for clozapine therapy.

  2. Review: microspheres for radioembolization therapy

    International Nuclear Information System (INIS)

    Zhao Mingqiang; Xu Shuhe

    2007-12-01

    Radioembolization of liver cancer has been proven to be an effective therapy in nuclear medicine. The yttrium-90 glass microspheres has been used to treat both primary and metastatic liver tumors in clinic which shown encouraging results. The preparation, stability, degradation and application for medical purpose of radioactive microspheres are reviewed. At first, the theory of radioem- bolization treating cancer is discussed; and then three major radiolabled micro- sphere materials are expounded: viz. glass, resin-based and polymer-based; Future improvements in the preparation and use of radioactive microspheres are prospected at last. (authors)

  3. Review: microspheres for radioembolization therapy

    Energy Technology Data Exchange (ETDEWEB)

    Mingqiang, Zhao; Shuhe, Xu [China Inst. of Atomic Energy, Beijing (China)

    2007-12-15

    Radioembolization of liver cancer has been proven to be an effective therapy in nuclear medicine. The yttrium-90 glass microspheres has been used to treat both primary and metastatic liver tumors in clinic which shown encouraging results. The preparation, stability, degradation and application for medical purpose of radioactive microspheres are reviewed. At first, the theory of radioem- bolization treating cancer is discussed; and then three major radiolabled micro- sphere materials are expounded: viz. glass, resin-based and polymer-based; Future improvements in the preparation and use of radioactive microspheres are prospected at last. (authors)

  4. Intestinal absorption of PLAGA microspheres in the rat.

    Science.gov (United States)

    Damgé, C; Aprahamian, M; Marchais, H; Benoit, J P; Pinget, M

    1996-12-01

    Rhodamine B-labelled poly (DL-lactide-co-glycolide) (PLAGA) microspheres of 2 different sizes, 1-5 microns and 5-10 microns, were administered as a single dose (1.44 x 10(9) and 1.83 x 10(8) particles, respectively) into the ileal lumen of adult rats. The content of rhodamine in the mesenteric vein and ileal lumen was analysed periodically from 10 min to 48 h as well as the distribution of microspheres in the intestinal mucosa and various other tissues. The concentration of rhodamine decreased progressively in the intestinal lumen and was negligible after 24 h. The number of microspheres in the mesenteric vein increased rapidly and reached a maximum after 4 h whatever the size of the particles. It then decreased progressively, but more rapidly with microspheres > 5 microns than with microspheres PLAGA microspheres mainly crossed the intestinal mucosa at the site of Peyer's patches where microspheres of 5 microns were retained in the ileal lumen. A few small microspheres were occasionally observed in the epithelial cells. Only the smallest particles were recovered in the liver, lymph nodes and spleen while basement membranes were always labelled. It is concluded that PLAGA microspheres could be useful for the oral delivery of antigens if their size is between 1 and 5 microns.

  5. Gastroretentive Floating Microspheres of Silymarin: Preparation and ...

    African Journals Online (AJOL)

    Methods: Cellulose microspheres – formulated with hydroxylpropyl methylcellulose (HPMC) and ethyl cellulose (EC) – and Eudragit microspheres – formulated with Eudragit® S 100 (ES) and Eudragit® RL (ERL) - were prepared by an emulsion-solvent evaporation method. The floating microspheres were evaluated for flow ...

  6. Long-acting beta(2)-agonists in management of childhood asthma

    DEFF Research Database (Denmark)

    Bisgaard, H

    2000-01-01

    This review assesses the evidence regarding the use of long-acting beta(2)-agonists in the management of pediatric asthma. Thirty double-blind, randomized, controlled trials on the effects of formoterol and salmeterol on lung function in asthmatic children were identified. Single doses of inhaled......, long-acting beta(2)-agonists provide effective bronchodilatation and bronchoprotection when used as intermittent, single-dose treatment of asthma in children, but not when used as regular treatment. Future studies should examine the positioning of long-acting beta(2)-agonists as an "as needed" rescue...... medication instead of short-acting beta(2)-agonists for pediatric asthma management....

  7. The production of lithium oxide microspheres from the disintegration of a liquid jet

    International Nuclear Information System (INIS)

    Al-Ubaidi, M.R.; Anno, J.N.

    1989-01-01

    Microspheres of lithium hydroxide (LiOH) were produced from in-flight solidification of droplets formed by the disintegration of an acoustically driven, mechanically vibrated cylindrical liquid jet of molten LiOH. The molten material at 470 to 480 degrees C was fed through a 25-gauge (0.0267-cm bore diameter) nozzle, interiorly electroplated with silver, under ∼27.6-kPa (4-psig) pressure, and at a mechanical vibration frequency of 10 Hz. The resulting jet issued into a 5.5-cm-diam vertical glass drop tube entraining a 94.5 cm 3 /s (12 ft 3 /h) argon gas stream at 75 degrees C. The 100-cm-long drop tube was sufficient to allow the droplets of molten LiOH resulting from jet disintegration to solidify in-flight without catastrophic thermal shock, being then collected a solid microspheres. These LiOH microspheres were then vacuum processed to lithium oxide (Li 2 O). Preliminary experiments resulted in microspheres with diameters varying from 120 to 185 μm, but with evidence of impurity contamination occurring during the initial stages of the process

  8. Risperidone for the core symptom domains of autism: results from the study by the autism network of the research units on pediatric psychopharmacology.

    Science.gov (United States)

    McDougle, Christopher J; Scahill, Lawrence; Aman, Michael G; McCracken, James T; Tierney, Elaine; Davies, Mark; Arnold, L Eugene; Posey, David J; Martin, Andrès; Ghuman, Jaswinder K; Shah, Bhavik; Chuang, Shirley Z; Swiezy, Naomi B; Gonzalez, Nilda M; Hollway, Jill; Koenig, Kathleen; McGough, James J; Ritz, Louise; Vitiello, Benedetto

    2005-06-01

    Risperidone has been found efficacious for decreasing severe tantrums, aggression, and self-injurious behavior in children and adolescents with autistic disorder (autism). The authors report on whether risperidone improves the core symptoms of autism, social and communication impairment and repetitive and stereotyped behavior. The database from an 8-week double-blind, placebo-controlled trial (N=101) and 16-week open-label continuation study (N=63) of risperidone for children and adolescents with autism was used to test for drug effects on secondary outcome measures: scores on the Ritvo-Freeman Real Life Rating Scale, the Children's Yale-Brown Obsessive Compulsive Scale, and the maladaptive behavior domain of the Vineland Adaptive Behavior Scales. Compared to placebo, risperidone led to a significantly greater reduction in the overall score on the Ritvo-Freeman Real Life Rating Scale, as well as the scores on the subscales for sensory motor behaviors (subscale I), affectual reactions (subscale III), and sensory responses (subscale IV). No statistically significant difference was observed, however, on the subscale for social relatedness (subscale II) or language (subscale V). Risperidone also resulted in significantly greater reductions in scores on the Children's Yale-Brown Obsessive Compulsive Scale and Vineland maladaptive behavior domain. This pattern of treatment response was maintained for 6 months. Risperidone led to significant improvements in the restricted, repetitive, and stereotyped patterns of behavior, interests, and activities of autistic children but did not significantly change their deficit in social interaction and communication. Further research is necessary to develop effective treatments for the core social and communicative impairments of autism.

  9. Memantine as adjunctive treatment to risperidone in children with autistic disorder: a randomized, double-blind, placebo-controlled trial.

    Science.gov (United States)

    Ghaleiha, Ali; Asadabadi, Mahtab; Mohammadi, Mohammad-Reza; Shahei, Maryam; Tabrizi, Mina; Hajiaghaee, Reza; Hassanzadeh, Elmira; Akhondzadeh, Shahin

    2013-05-01

    Autism is a neurodevelopmental disorder that causes significant impairment in socialization and communication. It is also associated with ritualistic and stereotypical behaviour. Recent studies propose both hyper-and hypoglutamatergic ideologies for autism. The objective of this study was to assess the effects of memantine plus risperidone in the treatment of children with autism. Children with autism were randomly allocated to risperidone plus memantine or placebo plus risperidone for a 10-wk, double-blind, placebo-controlled study. The dose of risperidone was titrated up to 3 mg/d and memantine was titrated to 20 mg/d. Children were assessed at baseline and after 2, 4, 6, 8 and 10 wk of starting medication protocol. The primary outcome measure was the irritability subscale of Aberrant Behavior Checklist-Community (ABC-C). Difference between the two treatment arms was significant as the group that received memantine had greater reduction in ABC-C subscale scores for irritability, stereotypic behaviour and hyperactivity. Eight side-effects were observed over the trial, out of the 25 side-effects that the checklist included. The difference between the two groups in the frequency of side-effects was not significant. The present study suggests that memantine may be a potential adjunctive treatment strategy for autism and it was generally well tolerated. This trial is registered with the Iranian Clinical Trials Registry (IRCT1138901151556N10; www.irct.ir).

  10. Comparison of olanzapine and risperidone in the EMBLEM Study: translation of randomized controlled trial findings into clinical practice.

    Science.gov (United States)

    Novick, Diego; Reed, Catherine; Haro, Josep Maria; Gonzalez-Pinto, Ana; Perrin, Elena; Aguado, Jaume; Tohen, Mauricio

    2010-09-01

    Data from the EMBLEM Study, a 2-year, prospective, observational study of health outcomes associated with acute treatment of patients experiencing a manic/mixed episode of bipolar disorder, was used to compare the effectiveness of olanzapine monotherapy versus risperidone monotherapy, and to investigate whether the treatment effects were similar to those reported in a 3-week, randomized controlled trial assessing the same treatments. Symptom severity measures included the Young Mania Rating Scale (YMRS), the 5-item Hamilton Depression Rating Scale, and the Clinical Global Impression-Bipolar Disorder Scale. A total of 245 EMBLEM inpatients were analyzed with YMRS >or=20: olanzapine (n=209), risperidone (n=36). Both the treatment groups had similar improvements in YMRS from baseline to 6 weeks, but there was a significantly greater improvement in 5-item Hamilton Depression Rating Scale in the olanzapine group. There was a similar improvement in Clinical Global Impression-Bipolar Disorder Scale in both the groups and the occurrence of treatment-emergent adverse events and weight gain did not differ between the treatment groups. The EMBLEM results partly support those of the randomized controlled trial, which suggests olanzapine and risperidone have similar improvements in mania but that olanzapine monotherapy may be more effective than risperidone monotherapy in the treatment of depressive symptoms associated with mania. Limitations include differences in study design, patient population, and length of follow-up.

  11. Hydrogen transport and storage in engineered glass microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Rambach, G.D.

    1995-02-28

    New, high strength glass microspheres filled with pressurized hydrogen exhibit densities which make them attractive for bulk hydrogen storage and transport. The membrane tensile stress at failure for engineered glass microspheres is about 150,000 psi, permitting a three-fold increase in pressure limit and storage capacity above commercial microspheres, which have been studied a decade ago and have been shown to fail at membrane stresses of 50,000 psi. This analysis relating glass microspheres for hydrogen transport with infrastructure and economics, indicate that pressurized microspheres can be economically competitive with other forms of bulk rail and truck transport such as pressurized tube transports and liquid hydrogen trailers. This paper will describe the matching of current glass microspheres with the useful application in commercial hydrogen bulk transport and storage.

  12. Absorbed dose kernel and self-shielding calculations for a novel radiopaque glass microsphere for transarterial radioembolization.

    Science.gov (United States)

    Church, Cody; Mawko, George; Archambault, John Paul; Lewandowski, Robert; Liu, David; Kehoe, Sharon; Boyd, Daniel; Abraham, Robert; Syme, Alasdair

    2018-02-01

    Radiopaque microspheres may provide intraprocedural and postprocedural feedback during transarterial radioembolization (TARE). Furthermore, the potential to use higher resolution x-ray imaging techniques as opposed to nuclear medicine imaging suggests that significant improvements in the accuracy and precision of radiation dosimetry calculations could be realized for this type of therapy. This study investigates the absorbed dose kernel for novel radiopaque microspheres including contributions of both short and long-lived contaminant radionuclides while concurrently quantifying the self-shielding of the glass network. Monte Carlo simulations using EGSnrc were performed to determine the dose kernels for all monoenergetic electron emissions and all beta spectra for radionuclides reported in a neutron activation study of the microspheres. Simulations were benchmarked against an accepted 90 Y dose point kernel. Self-shielding was quantified for the microspheres by simulating an isotropically emitting, uniformly distributed source, in glass and in water. The ratio of the absorbed doses was scored as a function of distance from a microsphere. The absorbed dose kernel for the microspheres was calculated for (a) two bead formulations following (b) two different durations of neutron activation, at (c) various time points following activation. Self-shielding varies with time postremoval from the reactor. At early time points, it is less pronounced due to the higher energies of the emissions. It is on the order of 0.4-2.8% at a radial distance of 5.43 mm with increased size from 10 to 50 μm in diameter during the time that the microspheres would be administered to a patient. At long time points, self-shielding is more pronounced and can reach values in excess of 20% near the end of the range of the emissions. Absorbed dose kernels for 90 Y, 90m Y, 85m Sr, 85 Sr, 87m Sr, 89 Sr, 70 Ga, 72 Ga, and 31 Si are presented and used to determine an overall kernel for the

  13. Movement disorders in elderly users of risperidone and first generation antipsychotic agents: a Canadian population-based study.

    Directory of Open Access Journals (Sweden)

    Irina Vasilyeva

    Full Text Available Despite concerns over the potential for severe adverse events, antipsychotic medications remain the mainstay of treatment of behaviour disorders and psychosis in elderly patients. Second-generation antipsychotic agents (SGAs; e.g., risperidone, olanzapine, quetiapine have generally shown a better safety profile compared to the first-generation agents (FGAs; e.g., haloperidol and phenothiazines, particularly in terms of a lower potential for involuntary movement disorders. Risperidone, the only SGA with an official indication for the management of inappropriate behaviour in dementia, has emerged as the antipsychotic most commonly prescribed to older patients. Most clinical trials evaluating the risk of movement disorders in elderly patients receiving antipsychotic therapy have been of limited sample size and/or of relatively short duration. A few observational studies have produced inconsistent results.A population-based retrospective cohort study of all residents of the Canadian province of Manitoba aged 65 and over, who were dispensed antipsychotic medications for the first time during the time period from April 1, 2000 to March 31, 2007, was conducted using Manitoba's Department of Health's administrative databases. Cox proportional hazards models were used to determine the risk of extrapyramidal symptoms (EPS in new users of risperidone compared to new users of FGAs.After controlling for potential confounders (demographics, comorbidity and medication use, risperidone use was associated with a lower risk of EPS compared to FGAs at 30, 60, 90 and 180 days (adjusted hazard ratios [HR] 0.38, 95% CI: 0.22-0.67; 0.45, 95% CI: 0.28-0.73; 0.50, 95% CI: 0.33-0.77; 0.65, 95% CI: 0.45-0.94, respectively. At 360 days, the strength of the association weakened with an adjusted HR of 0.75, 95% CI: 0.54-1.05.In a large population of elderly patients the use of risperidone was associated with a lower risk of EPS compared to FGAs.

  14. Innovative hydrogen storage in hollow glass-microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Keding, M.; Schmid, G.; Tajmar, M. [Austrian Research Centers, Vienna (Austria)

    2009-07-01

    Hydrogen storage technologies are becoming increasingly important for a number of future applications. The Austrian Research Centers (ARC) are developing a unique hydrogen storage system that combines the advantages of both hollow glass microsphere and chemical compound hydrogen storage, but eliminates their respective drawbacks. Water is utilized as a functional liquid to carry the hollow glass microspheres that are loaded with up to 700 bar of hydrogen gas. Sodium borohydride (NaBH{sub 4}) is then injected together with the glass microspheres into a reaction chamber where the water reacts catalytically with the NaBH{sub 4} producing hydrogen and heat. The heat is then utilized to release the hydrogen from the hollow glass microspheres providing a double hydrogen generation process without any external energy or heat during storage or gas release. The paper described this hydrogen storage system with particular reference to microspheres, the coating process, the experimental facility and NaBH{sub 4} test results. It was concluded that hydrogen storage and production on demand is possible with microspheres and sodium borohydride solution. 9 refs., 16 figs.

  15. A facile approach to fabricate Au nanoparticles loaded SiO2 microspheres for catalytic reduction of 4-nitrophenol

    International Nuclear Information System (INIS)

    Tang, Mingyi; Huang, Guanbo; Li, Xianxian; Pang, Xiaobo; Qiu, Haixia

    2015-01-01

    Hydrophilic and biocompatible macromolecules were used to improve and simplify the process for the fabrication of core/shell SiO 2 @Au composite particles. The influence of polymers on the morphology of SiO 2 @Au particles with different size of SiO 2 cores was analyzed by transmission electron microscopy and scanning electron microscopy. The optical property of the SiO 2 @Au particles was studied with UV–Vis spectroscopy. The results indicate that the structure and composition of macromolecules affect the morphology of Au layers on SiO 2 microspheres. The SiO 2 @Au particles prepared in the presence of polyvinyl alcohol (PVA) or polyvinylpyrrolidone (PVP) have thin and complete Au nanoshells owing to their inducing act in preferential growth of Au nanoparticles along the surface of SiO 2 microspheres. SiO 2 @Au particles can be also prepared from SiO 2 microspheres modified with 3-aminopropyltrimethoxysilane in the presence of PVA or PVP. This offers a simple way to fabricate a Au layer on SiO 2 or other microspheres. The SiO 2 @Au particles demonstrated high catalytic activity in the reduction of 4-nitrophenol. - Highlights: • Facile direct deposition method for Au nanoparticles on silica microspheres. • Influence of different types of macromolecule on the formation of Au shell. • High catalytic performance of Au nanoparticles on silica microspheres

  16. Celecoxib as adjunctive treatment to risperidone in children with autistic disorder: a randomized, double-blind, placebo-controlled trial.

    Science.gov (United States)

    Asadabadi, Mahtab; Mohammadi, Mohammad-Reza; Ghanizadeh, Ahmad; Modabbernia, Amirhossein; Ashrafi, Mandana; Hassanzadeh, Elmira; Forghani, Saeedeh; Akhondzadeh, Shahin

    2013-01-01

    Autism is associated with activation of the inflammatory response system. This study aims to assess the efficacy of a cyclooxygenase-2 inhibitor, celecoxib, as adjunctive therapy in the treatment of autism In a 10-week randomized double-blind placebo-controlled study, 40 outpatient children with a Diagnostic and Statistical Manual of Mental Disorders, fourth edition, text revision clinical diagnosis of autism were randomly allocated to celecoxib plus risperidone or placebo plus risperidone. The dose of risperidone and celecoxib were titrated up to 3 and 300 mg/day, respectively. Patients were assessed at baseline and after 2, 4, 6, and 10 weeks of starting medication using the Aberrant Behavior Checklist-Community (ABC-C) Rating Scale. Primary outcome measure was the change in irritability subscale of ABC-C. Significant time × treatment interaction was observed for Irritability (F (1.658, 63.021) = 13.580, P autism. (Registration, www.irct.ir ; IRCT138711091556N2).

  17. Microsphere estimates of blood flow: Methodological considerations

    International Nuclear Information System (INIS)

    von Ritter, C.; Hinder, R.A.; Womack, W.; Bauerfeind, P.; Fimmel, C.J.; Kvietys, P.R.; Granger, D.N.; Blum, A.L.

    1988-01-01

    The microsphere technique is a standard method for measuring blood flow in experimental animals. Sporadic reports have appeared outlining the limitations of this method. In this study the authors have systematically assessed the effect of blood withdrawals for reference sampling, microsphere numbers, and anesthesia on blood flow estimates using radioactive microspheres in dogs. Experiments were performed on 18 conscious and 12 anesthetized dogs. Four blood flow estimates were performed over 120 min using 1 x 10 6 microspheres each time. The effects of excessive numbers of microspheres pentobarbital sodium anesthesia, and replacement of volume loss for reference samples with dextran 70 were assessed. In both conscious and anesthetized dogs a progressive decrease in gastric mucosal blood flow and cardiac output was observed over 120 min. This was also observed in the pancreas in conscious dogs. The major factor responsible for these changes was the volume loss due to the reference sample withdrawals. Replacement of the withdrawn blood with dextran 70 led to stable blood flows to all organs. The injection of excessive numbers of microspheres did not modify hemodynamics to a greater extent than did the injection of 4 million microspheres. Anesthesia exerted no influence on blood flow other than raising coronary flow. The authors conclude that although blood flow to the gastric mucosa and the pancreas is sensitive to the minor hemodynamic changes associated with the microsphere technique, replacement of volume loss for reference samples ensures stable blood flow to all organs over a 120-min period

  18. Microsphere based improved sunscreen formulation of ethylhexyl methoxycinnamate.

    Science.gov (United States)

    Gogna, Deepak; Jain, Sunil K; Yadav, Awesh K; Agrawal, G P

    2007-04-01

    Polymethylmethacrylate (PMMA) microspheres of ethylhexyl methoxycinnamate (EHM) were prepared by emulsion solvent evaporation method to improve its photostability and effectiveness as sunscreening agent. Process parameters like stirring speed and aqueous polyvinyl alcohol (PVA) concentration were analyzed in order to optimize the formulations. Shape and surface morphology of the microspheres were examined using scanning electron microscopy. Particle size of the microspheres was determined using laser diffraction particle size analyzer. The PMMA microspheres of EHM were incorporated in water-removable cream base. The in vitro drug release of EHM in pH 7.4 was performed using dialysis membrane. Thin layer chromatography was performed to determine photostability of EHM inside the microspheres. The formulations were evaluated for sun protection factor (SPF) and minimum erythema dose (MED) in albino rats. Cream base formulation containing microspheres prepared using EHM:PMMA in ratio of 1:3 (C(3)) showed slowest drug (EHM) release and those prepared with EHM: PMMA in ratio of 1:1 showed fastest release. The cream base formulations containing EHM loaded microspheres had shown better SPF (more than 16.0) as compared to formulation C(d) that contained 3% free EHM as sunscreen agent and showed SPF 4.66. These studies revealed that the incorporation of EHM loaded PMMA microspheres into cream base had greatly increased the efficacy of sunscreen formulation approximately four times. Further, photostability was also shown to be improved in PMMA microspheres.

  19. Preparation and Characterization of Sugar Cane Wax Microspheres ...

    African Journals Online (AJOL)

    ... and characterize indomethacin (IM) microspheres prepared with sugar cane wax microsperes. Methods: Microspheres were prepared by melt-emulsified dispersion and cooling-induced solidification method. The microspheres were characterized by scanning electron microscopy (SEM) and differntial scanning calorimetry ...

  20. Preparation of mesoporous zirconia microspheres as inert matrix

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Ting [State Key Laboratory of New Ceramics and Fine Processing, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084 (China); Wang, Chen; Lv, Jinlong [Beijing Key Laboratory of Fine Ceramics, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084 (China); Liang, Tongxiang, E-mail: txliang@tsinghua.edu.cn [State Key Laboratory of New Ceramics and Fine Processing, Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084 (China)

    2016-12-01

    Mesoporous zirconia microspheres, with a diameter of 900 μm, were prepared as an inert accelerator driven system (ADS) transmutation element matrix by the sol-gel method. The purpose of mesopores is to improve the adsorption capacity of inert matrix fuel (IMF) for minor actinides. The study indicated that the mesoporous zirconia performance was improved after the microspheres were hydrothermally treated at 150 °C, the specific surface area increased from 28.29 m{sup 2}/g to 61.28 m{sup 2}/g, and hydrothermal treatment avoided the cracking of the microspheres. Pre-decomposition of the organics during the hydrothermal process stabilized the mesoporous structure. The average pore diameter of mesoporous microsphere was 14.3 nm. - Highlights: • Mesoporous zirconia microspheres with a diameter of 900 μm were prepared as ADS transmutation element inert matrix. • The mesoporous performance was improved after the microspheres were hydrothermally treated at 150 °C. • The specific surface area increased from 28.29 m{sup 2}/g to 61.28 m{sup 2}/g. • The hydrothermal treatment could avoid the cracking of the microspheres. • The specific surface area of mesoporous microsphere was 61.28 m{sup 2}/g and the average pore diameter was 14.3 nm.

  1. Insulin delivery through nasal route using thiolated microspheres.

    Science.gov (United States)

    Nema, Tarang; Jain, Ashish; Jain, Aviral; Shilpi, Satish; Gulbake, Arvind; Hurkat, Pooja; Jain, Sanjay K

    2013-01-01

    The aim of the present study was to investigate the potential of developed thiolated microspheres for insulin delivery through nasal route. In the present study, cysteine was immobilized on carbopol using EDAC. A total of 269.93 µmol free thiol groups per gram polymer were determined. The prepared nonthiolated and thiolated microspheres were studied for particle shape, size, drug content, swellability, mucoadhesion and in vitro insulin release. The thiolated microspheres exhibited higher mucoadhesion due to formation of covalent bonds via disulfide bridges with the mucus gel layer. Drug permeation through goat nasal mucosa of nonthiolated and thiolated microspheres were found as 52.62 ± 2.4% and 78.85 ± 3.1% in 6 h, respectively. Thiolated microspheres bearing insulin showed better reduction in blood glucose level (BGL) in comparison to nonthiolated microspheres as 31.23 ± 2.12% and 75.25 ± 0.93% blood glucose of initial BGL were observed at 6 h after nasal delivery of thiolated and nonthiolated microspheres in streptozotocin-induced diabetic rabbits.

  2. Current knowledge on biodegradable microspheres in drug delivery.

    Science.gov (United States)

    Prajapati, Vipul D; Jani, Girish K; Kapadia, Jinita R

    2015-08-01

    Biodegradable microspheres have gained popularity for delivering a wide variety of molecules via various routes. These types of products have been prepared using various natural and synthetic biodegradable polymers through suitable techniques for desired delivery of various challenging molecules. Selection of biodegradable polymers and technique play a key role in desired drug delivery. This review describes an overview of the fundamental knowledge and status of biodegradable microspheres in effective delivery of various molecules via desired routes with consideration of outlines of various compendial and non-compendial biodegradable polymers, formulation techniques and release mechanism of microspheres, patents and commercial biodegradable microspheres. There are various advantages of using biodegradable polymers including promise of development with different types of molecules. Biocompatibility, low dosage and reduced side effects are some reasons why usage biodegradable microspheres have gained in popularity. Selection of biodegradable polymers and formulation techniques to create microspheres is the biggest challenge in research. In the near future, biodegradable microspheres will become the eco-friendly product for drug delivery of various genes, hormones, proteins and peptides at specific site of body for desired periods of time.

  3. Hydrogen transport and storage in engineered glass microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Rambach, G.D.

    1995-04-18

    New, high strength glass microspheres filled with pressurized hydrogen exhibit densities which make them attractive for bulk hydrogen storage and transport. The membrane tensile stress at failure for our engineered glass microspheres is about 150,000 psi, permitting a threefold increase in pressure limit and storage capacity above commercial microspheres, which have been studied a decade ago and have been shown to fail at membrane stresses of 50,000 psi. Our analysis relating glass microspheres for hydrogen transport with infrastructure and economics, indicate that pressurized microspheres can be economically competitive with other forms of bulk rail and truck transport such as pressurized tube transports and liquid hydrogen trailers.

  4. Evaluation of radiolabelled microspheres as digesta markers

    International Nuclear Information System (INIS)

    Young, B.A.; Turner, B.V.; Dixon, A.E.; Exley, D.M.; Young, S.B.; Abidin, Z.

    1991-01-01

    The suitability of microspheres as markers for measuring digesta kinetics in sheep was examined. Microspheres offer advantages of uniformity of size and density, and stability during passage through the gastrointestinal tract. They are commercially available labelled with the choice of one of eleven different radionuclides and can be easily measured in digesta and faecal material. Tests comparing several types of digesta markers gave different measures of kinetic parameters when the measurements were made concurrently in the same sheep. However, concurrent measurements derived from use of microspheres were consistent. Microspheres offer a new alternative for digestive studies. (author). 19 refs, 4 tabs

  5. Cabotegravir long acting injection protects macaques against intravenous challenge with SIVmac251.

    Science.gov (United States)

    Andrews, Chasity D; Bernard, Leslie St; Poon, Amanda Yee; Mohri, Hiroshi; Gettie, Natanya; Spreen, William R; Gettie, Agegnehu; Russell-Lodrigue, Kasi; Blanchard, James; Hong, Zhi; Ho, David D; Markowitz, Martin

    2017-02-20

    We evaluated the effectiveness of cabotegravir (CAB; GSK1265744 or GSK744) long acting as preexposure prophylaxis (PrEP) against intravenous simian immunodeficiency virus (SIV) challenge in a model that mimics blood transfusions based on the per-act probability of infection. CAB long acting is an integrase strand transfer inhibitor formulated as a 200 mg/ml injectable nanoparticle suspension that is an effective PrEP agent against rectal and vaginal simian/human immunodeficiency virus transmission in macaques. Three groups of rhesus macaques (n = 8 per group) were injected intramuscularly with CAB long acting and challenged intravenously with 17 animal infectious dose 50% SIVmac251 on week 2. Group 1 was injected with 50 mg/kg on week 0 and 4 to evaluate the protective efficacy of the CAB long-acting dose used in macaque studies mimicking sexual transmission. Group 2 was injected with 50 mg/kg on week 0 to evaluate the necessity of the second injection of CAB long acting for protection against intravenous challenge. Group 3 was injected with 25 mg/kg on week 0 and 50 mg/kg on week 4 to correlate CAB plasma concentrations at the time of challenge with protection. Five additional macaques remained untreated as controls. CAB long acting was highly protective with 21 of the 24 CAB long-acting-treated macaques remaining aviremic, resulting in 88% protection. The plasma CAB concentration at the time of virus challenge appeared to be more important for protection than sustaining therapeutic plasma concentrations with the second CAB long acting injection. These results support the clinical investigation of CAB long acting as PrEP in people who inject drugs.

  6. Glass microspheres for brachytherapy

    International Nuclear Information System (INIS)

    Prado, Miguel O.; Prastalo, Simon; Blaumann, Herman; Longhino, Juan M.; Repetto Llamazares, A.H.V.

    2007-01-01

    We developed the capacity to produce glass microspheres containing in their structure one or more radioactive isotopes useful for brachytherapy. We studied the various facts related with their production: (Rare earth) alumino silicate glass making, glass characterization, microspheres production, nuclear activation through (n,γ) nuclear reactions, mechanical characterization before and after irradiation. Corrosion tests in simulated human plasma and mechanical properties characterization were done before and after irradiation. (author) [es

  7. No change of dopamine transporter density in basal ganglia after risperidone treatment in drug-naive children with Tourette's disorder

    International Nuclear Information System (INIS)

    Ryu, W. K.; Ryu, Y. H.; Yoon, M. J.; Chun, K. A.; Lee, J. D.; Zee, D. Y.; Choi, T. H.

    2003-01-01

    Tourette's disorder (TD), which is characterized by multiple waxing and waning motor tics and one or more vocal tics, is known to be associated with abnormalities in the dopaminergic system. To testify our hypothesis that risperidone would improve tic symptoms of TD patients through the change of the dopaminergic system, we measured the DAT densities between drug-naive children with TD and normal children investigated the DAT density before and after treatment with risperidone in drug-naive children with TD, using lodine-123 labelled N-(3-iodopropen-2-yl)-2beta-carbomethoxy-3beta-(4-chlorophenyl) tropane(I-123 IPT) single photon emission computed tomography (SPECT). I-123 IPT SPECT imaging and Yale Global Tic Severity Scale-Korean version (YGTSS-K) for assessing the tic symptom severity were carried out before and after treatment with risperidone for 8 weeks in eight drug-naive children with TD. Eight normal children also underwent SPECT imaging 2 hours after an intravenous administration of I-123 IPT and carried out both quantitative and qualitative analyses using the obtained SPECT data, which were reconstructed for the assessment of the specific/non-specific DAT binding ratio in the basal ganglia. The drug-naive children with TD had a significantly greater increase in the specific/nonspecific DAT binding ratio of both basal ganglia compared with the normal children. However, no significant difference in the specific/nonspecific DAT binding ratio of the basal ganglia before and after treatment with riperidone in children with TD was not found, although tic symptoms were significantly improved with risperidone. These findings suggest that DAT densities are directly associated with the pathophysiology of TD, however, that the effect of risperidone on tic symptoms in children with TD is not attributed to the change of dopaminergic system

  8. Long-acting reversible contraceptive acceptability and unintended pregnancy among women presenting for short-acting methods: a randomized patient preference trial.

    Science.gov (United States)

    Hubacher, David; Spector, Hannah; Monteith, Charles; Chen, Pai-Lien; Hart, Catherine

    2017-02-01

    Measures of contraceptive effectiveness combine technology and user-related factors. Observational studies show higher effectiveness of long-acting reversible contraception compared with short-acting reversible contraception. Women who choose long-acting reversible contraception may differ in key ways from women who choose short-acting reversible contraception, and it may be these differences that are responsible for the high effectiveness of long-acting reversible contraception. Wider use of long-acting reversible contraception is recommended, but scientific evidence of acceptability and successful use is lacking in a population that typically opts for short-acting methods. The objective of the study was to reduce bias in measuring contraceptive effectiveness and better isolate the independent role that long-acting reversible contraception has in preventing unintended pregnancy relative to short-acting reversible contraception. We conducted a partially randomized patient preference trial and recruited women aged 18-29 years who were seeking a short-acting method (pills or injectable). Participants who agreed to randomization were assigned to 1 of 2 categories: long-acting reversible contraception or short-acting reversible contraception. Women who declined randomization but agreed to follow-up in the observational cohort chose their preferred method. Under randomization, participants chose a specific method in the category and received it for free, whereas participants in the preference cohort paid for the contraception in their usual fashion. Participants were followed up prospectively to measure primary outcomes of method continuation and unintended pregnancy at 12 months. Kaplan-Meier techniques were used to estimate method continuation probabilities. Intent-to-treat principles were applied after method initiation for comparing incidence of unintended pregnancy. We also measured acceptability in terms of level of happiness with the products. Of the 916

  9. Preparation of polystyrene microsphere with emulsion microencapsulation method

    International Nuclear Information System (INIS)

    Li Bo Zhang Lin; Zhang Zhganwen; You Dan; Wei Yun; Wang Chaoyang; Lin Bo; Shi Tao; Chu Qiaomei

    2003-01-01

    The preparation of hollow polystyrene microspheres that are used as inner shell of multi-shell plastic microspheres in the ICF experiments is focused on. The effects of surfactants, water-soluble polymer and electrolyte on the properties of resultant microspheres are studied. Based on these experiments, a fabricating procedure was established with which hollow microspheres were prepared with diameter about 150-3000 μm, wall thickness 0.8-15 μm and toughness Ra less than 4 nm. (authors)

  10. Preparation of novel biodegradable ropivacaine microspheres and evaluation of their efficacy in sciatic nerve block in mice

    Directory of Open Access Journals (Sweden)

    Ni Q

    2016-08-01

    Full Text Available Qiang Ni, Wurong Chen, Lei Tong, Jue Cao, Chao Ji Department of Anesthesiology, Putuo Hospital, Shanghai University of Traditional Chinese Medicine, Shanghai, People’s Republic of China Abstract: In this study, ropivacaine chitosan-loaded microspheres for subcutaneous administration were developed. The systems were characterized in terms of surface morphology, particle size, encapsulation efficiency, and in vitro release behavior. Results showed that the microspheres had drug loading rate of 7.3% and encapsulation efficiency of 91.2%, and their average diameter was 2.62±0.76 µm. The morphology study revealed that the microspheres are uniform monodispersed spheres and did not form aggregates in aqueous solution. It was clearly observed that the release profile of ropivacaine microspheres exhibited a biphasic pattern: the initial burst release within the first 2 hours and a following slower and sustained release over a long time. In vivo, a greater area under the plasma concentration–time curve from 0 to t (AUC0–t was obtained from the microspheres (4.27-fold, than from the injection group, which indicated that there was a significantly improved systemic exposure to ropivacaine. Pharmacodynamics result showed that preparing ropivacaine as microsphere preparation could not only extend the drug effect time but also decrease the administration dosage. Keywords: ropivacaine, chitosan, microspheres, in vitro release, pharmacodynamics

  11. Preparation of alumina microspheres

    International Nuclear Information System (INIS)

    Santos, W.R. dos; Abrao, A.

    1980-01-01

    Inorganic exchangers are widely used for adsorption and column partition chromatography. The main difficulty of using commercial alumina (in powder) for column chromatography is related to its packing, and the operations through the column become diffcult and time-consuming; also it turns to be virtually impossible to use large dimension columns. In order to eliminate these problems, a process for the preparation of alumina micro-spheres was developed as an adaptation of a similar process used to prepare nuclear fuel microspheres (UO 2 , ThO 2 ). The flowsheet of this process is presented together with the analytical results of sphericity after calcination, granulometry, density and characterization by X-ray diffractometry. Solubility tests showed that the so-prepared microspheres are well resistant to strong acids and bases; retention tests showed their efficiency, mainly to copper. (C.L.B.) [pt

  12. Controlling silk fibroin microspheres via molecular weight distribution

    International Nuclear Information System (INIS)

    Zeng, Dong-Mei; Pan, Jue-Jing; Wang, Qun; Liu, Xin-Fang; Wang, Hui; Zhang, Ke-Qin

    2015-01-01

    Silk fibroin (SF) microspheres were produced by salting out SF solution via the addition of potassium phosphate buffer solution (K 2 HPO 4 –KH 2 PO 4 ). The morphology, size and polydispersity of SF microspheres were adjusted by changing the molecular weight (MW) distribution and concentration of SF, as well as the ionic strength and pH of the buffer solution. Changing the conditions under which the SF fiber dissolved in the Lithium Boride (LiBr) solution resulted in altering the MW distribution of SF solution. Under optimal salting-out conditions (ionic strength > 0.7 M and pH > 7) and using a smaller and narrower SF MW distribution, SF microspheres with smoother shapes and more uniform sizes were produced. Meanwhile, the size and polydispersity of the microspheres increased when the SF concentration was increased from 0.25 mg/mL to 20 mg/mL. The improved SF microspheres, obtained by altering the distribution of molecular weight, have potential in drug and gene delivery applications. - Highlights: • MW distribution was changed by applying different dissolving methods of SF fiber. • Smaller and narrower MW distribution improves the quality of SF microspheres. • Size and polydispersity of microspheres increase as SF concentration increases. • Improved SF microspheres have potential in drug and gene delivery applications

  13. Controlling silk fibroin microspheres via molecular weight distribution

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Dong-Mei; Pan, Jue-Jing; Wang, Qun; Liu, Xin-Fang; Wang, Hui [National Engineering Laboratory for Modern Silk, College for Textile and Clothing Engineering, Soochow University, Suzhou, Jiangsu 215123 (China); Zhang, Ke-Qin, E-mail: kqzhang@suda.edu.cn [National Engineering Laboratory for Modern Silk, College for Textile and Clothing Engineering, Soochow University, Suzhou, Jiangsu 215123 (China); Research Center of Cooperative Innovation for Functional Organic/Polymer Material Micro/Nanofabrication, Soochow University, Suzhou, Jiangsu 215123 (China)

    2015-05-01

    Silk fibroin (SF) microspheres were produced by salting out SF solution via the addition of potassium phosphate buffer solution (K{sub 2}HPO{sub 4}–KH{sub 2}PO{sub 4}). The morphology, size and polydispersity of SF microspheres were adjusted by changing the molecular weight (MW) distribution and concentration of SF, as well as the ionic strength and pH of the buffer solution. Changing the conditions under which the SF fiber dissolved in the Lithium Boride (LiBr) solution resulted in altering the MW distribution of SF solution. Under optimal salting-out conditions (ionic strength > 0.7 M and pH > 7) and using a smaller and narrower SF MW distribution, SF microspheres with smoother shapes and more uniform sizes were produced. Meanwhile, the size and polydispersity of the microspheres increased when the SF concentration was increased from 0.25 mg/mL to 20 mg/mL. The improved SF microspheres, obtained by altering the distribution of molecular weight, have potential in drug and gene delivery applications. - Highlights: • MW distribution was changed by applying different dissolving methods of SF fiber. • Smaller and narrower MW distribution improves the quality of SF microspheres. • Size and polydispersity of microspheres increase as SF concentration increases. • Improved SF microspheres have potential in drug and gene delivery applications.

  14. Antibacterial activity of ciprofloxacin-loaded zein microsphere films

    International Nuclear Information System (INIS)

    Fu Jianxi; Wang Huajie; Zhou Yanqing; Wang Jinye

    2009-01-01

    Our aim was to produce an antibiotic-emitting coating composed of zein microspheres for the prevention of bacterial infection on implanted devices. Ciprofloxacin-loaded zein microspheres were prepared using a phase separation procedure, with particle sizes between 0.5 and 2 μm. Drug encapsulation and drug loading varied with the amount of both zein and ciprofloxacin, and the highest encapsulation efficiency was 8.27% (2 mg/ml ciprofloxacin and 20 mg/ml zein; n = 3). A ciprofloxacin-loaded zein microsphere film (CF-MS film) was generated via solvent evaporation. Continuous drug release from a trypsin-degraded microsphere film was observed for up to 28 days. The liberation of ciprofloxacin from the trypsin-degraded film and the biodegradation of the microsphere film were highly correlated. Proliferation assay of the growth of human umbilical vein endothelial cells (HUVECs) by the MTT method showed that the microsphere film had no toxicity when compared with cells grown on Corning culture plates alone and plates with a zein film alone. Quantification of bacteria adhesion showed that adhesion on the microsphere film is significantly suppressed. In addition, according to the results of bacterial growth tests, ciprofloxacin-loaded microsphere films maintained antibacterial activity for more than 6 days. In contrast, a control medium containing a zein film allowed constant bacterial growth. These results indicate that CF-MS films might be useful as antibacterial films on implanted devices.

  15. Antibacterial activity of ciprofloxacin-loaded zein microsphere films

    Energy Technology Data Exchange (ETDEWEB)

    Fu Jianxi [Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 354 Fenglin Road, Shanghai 200032 (China); Henan Normal University, 46 East Construction Road, Xinxiang, Henan 453007 (China); Wang Huajie [College of Life Science and Biotechnology, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030 (China); Zhou Yanqing [Henan Normal University, 46 East Construction Road, Xinxiang, Henan 453007 (China); Wang Jinye, E-mail: jywang@mail.sioc.ac.cn [Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, 354 Fenglin Road, Shanghai 200032 (China); College of Life Science and Biotechnology, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030 (China)

    2009-05-05

    Our aim was to produce an antibiotic-emitting coating composed of zein microspheres for the prevention of bacterial infection on implanted devices. Ciprofloxacin-loaded zein microspheres were prepared using a phase separation procedure, with particle sizes between 0.5 and 2 {mu}m. Drug encapsulation and drug loading varied with the amount of both zein and ciprofloxacin, and the highest encapsulation efficiency was 8.27% (2 mg/ml ciprofloxacin and 20 mg/ml zein; n = 3). A ciprofloxacin-loaded zein microsphere film (CF-MS film) was generated via solvent evaporation. Continuous drug release from a trypsin-degraded microsphere film was observed for up to 28 days. The liberation of ciprofloxacin from the trypsin-degraded film and the biodegradation of the microsphere film were highly correlated. Proliferation assay of the growth of human umbilical vein endothelial cells (HUVECs) by the MTT method showed that the microsphere film had no toxicity when compared with cells grown on Corning culture plates alone and plates with a zein film alone. Quantification of bacteria adhesion showed that adhesion on the microsphere film is significantly suppressed. In addition, according to the results of bacterial growth tests, ciprofloxacin-loaded microsphere films maintained antibacterial activity for more than 6 days. In contrast, a control medium containing a zein film allowed constant bacterial growth. These results indicate that CF-MS films might be useful as antibacterial films on implanted devices.

  16. Bioequivalence study of a generic Risperidone (Iperdal® in healthy Thai male volunteers

    Directory of Open Access Journals (Sweden)

    Werawath Mahatthanatrakul

    2008-05-01

    Full Text Available The objective of this study was to compare the rate and extent of absorption of a generic risperidone (Iperdal® with a reference formulation (Risperdal® when given orally. The study was an open label, randomized, two-period, two-sequence,single dose cross-over design with a 2 weeks washout period in 16 healthy Thai male volunteers. Single oral dose of two 2-mg tablets of risperidone were administered and serial blood samples were collected from the antecubital vein before and at0.17, 0.33, 0.5, 0.75, 1.0, 1.5, 2.0, 3.0, 4.0, 6.0, 8.0, 12, 24 and 48 hours post dose. Risperidone plasma concentrations were assayed using a validated High Performance Liquid Chromatographic (HPLC-UV method modified from Avenosoet al. (2000. Pharamcokinetic parameters i.e. Cmax, AUC0à48 and Tmax were analyzed by noncompartment analysis. Variations of the data were analyzed by “Two Way Analysis of Variance” (ANOVA. Statistics were tested as stated in USP 28 guidelinefor bioequivalence study. The maximum concentration (Cmax, ng/ml of risperidone for the innovator and the generic product were 31.11±17.24 (range 5.64-56.78 and 32.58±19.77 (range 5.29-84.56 ng/ml, respectively. The area under theplasma concentration-time curve (AUC0®48 of the innovator and the generic product were 160.64±152.89 (range 18.57- 550.32 and 144.03±127.37 (range 16.27-456.0 ng.hr/ml, respectively. The time to maximum concentration (Tmax of theinnovator and the generic product were 0.97±0.41(range 0.5-2 and 1.02±0.32 (range 0.5-1.5 hr, respectively. The 90% confidence interval of the ratio of the ln-transformed of Cmax and AUC0à48 of both preparations were 89.39-112.99% and80.02-107.28% respectively which were within the acceptance range of 80.00-125.00%. Therefore, it can be concluded that both preparations used in this study are bioequivalent in terms of both the rate and extent of absorption.

  17. U3O8 microspheres sintering kinetics

    International Nuclear Information System (INIS)

    Godoy, A.L.E.

    1986-01-01

    U 3 O 8 microspheres sintering kinetics was determined using a hot-stage optical microscopy apparatus, able to reach temperature up to 1350 0 C in controlled atmospheres. The sintered material had its microstructure analysed by optical and electron microscopy. The microspheres were characterized initialy utilizing X-ray diffractometry and thermogravimetry. The equation which describes the microspheres shrinkage in function of the time was obtained using finite difference analysis X-ray diffractometry indicated hexagonal structure for the microspheres main starting material, ammonium diuranate thermogravimetric analysis showed reduction of this material to U 3 O 8 at 600 0 C. Ceramography results showed 5 hours sintered microspheres grain sizes G vary with the temperature. Sintered U 3 O 8 micrographs compared with published results for UO 2 , indicate similar homogeneity microstructural characteristics and suggest the processed micorspheres to be potentially useful as nuclear fuels. (Author) [pt

  18. Risperidone in Children and Adolescents with Conduct Disorder: A Single-Center, Open-Label Study

    OpenAIRE

    Ercan, Eyüp Sabri; Kutlu, Ayşe; Çıkoğlu, Sibel; Veznedaroğlu, Baybars; Erermiş, Serpil; Varan, Azmi

    2003-01-01

    Background: Risperidone is one of the most commonly used atypical antipsychotic drugs in the treatment of children and adolescents. However, the data about its use in children and adolescents with conduct disorder (CD) are limited.

  19. A comparison of risperidone and haloperidol for the risk of ischemic stroke in the elderly: a propensity score-matched cohort analysis.

    Science.gov (United States)

    Shin, Ju-Young; Choi, Nam-Kyong; Lee, Joongyub; Park, Mi-Ju; Lee, Shin Haeng; Park, Byung-Joo

    2015-08-01

    With an increase in antipsychotic use in the elderly, the safety profile of antipsychotics has been emphasized. Strong concerns have been raised about whether the risk of ischemic stroke differs between risperidone and haloperidol. This study compared the risk of ischemic stroke between elderly patients taking risperidone and haloperidol. We conducted a retrospective cohort study using the Korea Health Insurance Review and Assessment Service database, applying a propensity-matched analysis. The cohort consisted of elderly patients who were newly prescribed haloperidol or risperidone between January 1, 2006 and December 31, 2009. Patients with prior cerebrovascular diseases (ICD-10, I60-I69), transient ischemic attack (ICD-10, G45), or cerebral tumors (ICD-10, C31) during 365 days prior to the initiation date were excluded. The study subjects were selected by propensity score matching. The outcome was defined as the first hospitalization for ischemic stroke (ICD-10, I63). Cox regression models were used to estimate the hazard ratio (HR) and 95% confidence intervals (95% CI) for ischemic stroke with haloperidol compared with risperidone use. A total of 14,103 patients were included in the propensity-matched cohort for each drug. Overall, the incidence rate was higher for haloperidol users compared to the risperidone users (6.43 per 1000 person-years vs. 2.88 per 1000 person-years). A substantially increased risk was observed in haloperidol users (adjusted HR = 2.02, 95% CI, 1.12-3.62). The evidence showed that haloperidol should be prescribed in the elderly with caution. © The Author(s) 2015.

  20. The effect of combined treatment with risperidone and antidepressants on the MK-801-induced deficits in the social interaction test in rats.

    Science.gov (United States)

    Kamińska, Katarzyna; Rogóż, Zofia

    2015-12-01

    Several clinical reports have suggested that augmentation of atypical antipsychotics' activity by antidepressants may efficiently improve the treatment of negative and some cognitive symptoms of schizophrenia. The aim of the present study was to investigate the effect of antidepressant mirtazapine or escitalopram and risperidone (an atypical antipsychotic), given separately or jointly, on the MK-801-induced deficits in the social interaction test in rats. Antidepressants and risperidone were given 60 and 30 min before the test, respectively. The social interaction of male Wistar rats was measured for 10 min, starting 4 h after MK-801 (0.1 mg/kg) administration. In the social interaction test, MK-801-induced deficits in the parameters studied, i.e. the number of episodes and the time of interactions. Risperidone at a higher dose (0.1 mg/kg) reversed that effect. Co-treatment with an ineffective dose of risperidone (0.01 mg/kg) and mirtazapine (2.5 or 5 mg/kg) or escitalopram only at a dose of 5 mg/kg (but not 2.5 and 10 mg/kg) abolished the deficits evoked by MK-801. The obtained results suggest that especially mirtazapine, and to a smaller degree escitalopram may enhance the antipsychotic-like effect of risperidone in the animal test modeling some negative symptoms of schizophrenia. Copyright © 2015 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  1. Risperidone-induced type 2 diabetes presenting with diabetic ketoacidosis

    Directory of Open Access Journals (Sweden)

    Clarissa Ern Hui Fang

    2018-05-01

    Full Text Available A 28-year-old male presented with 2 days of vomiting and abdominal pain, preceded by 2 weeks of thirst, polyuria and polydipsia. He had recently started risperidone for obsessive-compulsive disorder. He reported a high dietary sugar intake and had a strong family history of type 2 diabetes mellitus (T2DM. On admission, he was tachycardic, tachypnoeic and drowsy with a Glasgow Coma Scale (GCS of 10/15. We noted axillary acanthosis nigricans and obesity (BMI 33.2 kg/m2. Dipstick urinalysis showed ketonuria and glycosuria. Blood results were consistent with diabetic ketoacidosis (DKA, with hyperosmolar state. We initiated our DKA protocol, with intravenous insulin, fluids and potassium, and we discontinued risperidone. His obesity, family history of T2DM, acanthosis nigricans and hyperosmolar state prompted consideration of T2DM presenting with ‘ketosis-prone diabetes’ (KPD rather than T1DM. Antibody markers of beta-cell autoimmunity were subsequently negative. Four weeks later, he had modified his diet and lost weight, and his metabolic parameters had normalised. We reduced his total daily insulin dose from 35 to 18 units and introduced metformin. We stopped insulin completely by week 7. At 6 months, his glucometer readings and glycated haemoglobin (HbA1c level had normalised.

  2. Cost Effectiveness of Paliperidone Long-Acting Injectable Versus Other Antipsychotics for the Maintenance Treatment of Schizophrenia in France.

    Science.gov (United States)

    Druais, Sylvain; Doutriaux, Agathe; Cognet, Magali; Godet, Annabelle; Lançon, Christophe; Levy, Pierre; Samalin, Ludovic; Guillon, Pascal

    2016-04-01

    French clinical recommendations suggest prescribing long-acting injectable (LAI) antipsychotics to patients with a maintenance treatment indication in schizophrenia. Despite this, and due to their relatively high acquisition and administration costs, LAIs are still underused in clinical practice in France, thus highlighting the need for pharmacoeconomic evaluations. Our objective was to estimate the cost effectiveness of paliperidone LAI (or paliperidone palmitate), a once-monthly second-generation LAI antipsychotic, compared with the most common antipsychotic medications for the maintenance treatment of schizophrenia in France. A Markov model was developed to simulate the progression of a cohort of schizophrenic patients through four health states (stable treated, stable non-treated, relapse and death) and to consider up to three lines of treatment to account for changes in treatment management. Paliperidone LAI was compared with risperidone LAI, aripiprazole LAI, olanzapine LAI, haloperidol LAI (or haloperidol decanoate) and oral olanzapine. Costs, quality-adjusted life-years (QALYs) and number of relapses were assessed over 5 years based on 3-month cycles with a discount rate of 4% and from a French health insurance perspective. Patients were considered to be stabilised after a schizophrenic episode and would enter the model at an initiation phase, followed by a prevention of relapse phase if successful. Data (e.g. relapse or discontinuation rates) for the initiation phase came from randomised clinical trials, whereas relapse rates in the prevention phase were derived from hospitalisation risks based on real-life French data to capture adherence effects. Safety and utility data were derived from international publications. Additionally, costs were retrieved from French health insurance databases and publications. Finally, expert opinion was used for validation purposes or in case of gaps in data. The robustness of results was assessed through deterministic and

  3. Preparation and drug controlled release of porous octyl-dextran microspheres.

    Science.gov (United States)

    Hou, Xin; Liu, Yanfei

    2015-01-01

    In this work, porous octyl-dextran microspheres with excellent properties were prepared by two steps. Firstly, dextran microspheres were synthesized by reversed-phase suspension polymerization. Secondly, octyl-dextran microspheres were prepared by the reaction between dextran microspheres and ethylhexyl glycidyl ether and freezing-drying method. Porous structure of microspheres was formed through the interaction between octyl groups and organic solvents. The structure, morphology, dry density, porosity and equilibrium water content of porous octyl-dextran microspheres were systematically investigated. The octyl content affected the properties of microspheres. The results showed that the dry density of microspheres decreased from 2.35 to 1.21 g/ml, porosity increased from 80.68 to 95.05% with the octyl content increasing from 0.49 to 2.28 mmol/g. Meanwhile, the equilibrium water content presented a peak value (90.18%) when the octyl content was 2.25 mmol/g. Octyl-dextran microspheres showed high capacity. Naturally drug carriers play an important role in drug-delivery systems for their biodegradability, wide raw materials sources and nontoxicity. Doxorubicin (DOX) was used as a drug model to examine the drug-loading capacity of porous octyl-dextran microspheres. The drug-loading efficiency increased with the increase in microspheres/drug ratio, while the encapsulation efficiency decreased. When microspheres/drug mass ratio was 4/1, the drug-loading efficiency and encapsulation efficiency were 10.20 and 51.00%, respectively. The release rate of DOX increased as drug content and porosity increased. In conclusion, porous octyl-dextran microspheres were synthesized successfully and have the potential to serve as an effective delivery system in drug controlled release.

  4. Low pressure gas filling of laser fusion microspheres

    International Nuclear Information System (INIS)

    Koo, J.C.; Dressler, J.L.; Hendricks, C.D.

    1979-01-01

    In our laser fusion microsphere production, large, thin gel-microspheres are formed before the chemicals are fused into glass. In this transient stage,, the gel-microspheres are found to be highly permeable to argon and many other inert gases. When the gel transforms to glass, the argon gas, for example, is trapped within to form argon filled, fusion target quality, glass microspheres. On the average, the partial pressure of the argon fills attained in this process is around 2 x 10 4 Pa at room temperature

  5. Hollow porous-wall glass microspheres for hydrogen storage

    Science.gov (United States)

    Heung, Leung K.; Schumacher, Ray F.; Wicks, George G.

    2010-02-23

    A porous wall hollow glass microsphere is provided having a diameter range of between 1 to 200 microns, a density of between 1.0 to 2.0 gm/cc, a porous-wall structure having wall openings defining an average pore size of between 10 to 1000 angstroms, and which contains therein a hydrogen storage material. The porous-wall structure facilitates the introduction of a hydrogen storage material into the interior of the porous wall hollow glass microsphere. In this manner, the resulting hollow glass microsphere can provide a membrane for the selective transport of hydrogen through the porous walls of the microsphere, the small pore size preventing gaseous or liquid contaminants from entering the interior of the hollow glass microsphere.

  6. Effects of risperidone on core symptoms of autistic disorder based on childhood autism rating scale: an open label study.

    Science.gov (United States)

    Ghaeli, Padideh; Nikvarz, Naemeh; Alaghband-Rad, Javad; Alimadadi, Abbas; Tehrani-Doost, Mehdi

    2014-01-01

    The aim of the present study was to evaluate the effect of risperidone in patients afflicted by autistic disorder especially with regards to its three core symptoms, including "relating to others", "communication skills", and "stereotyped behaviors" based on Childhood Autism Rating Scale (CARS). An 8-week open-label study of risperidone for treatment of autistic disorder in children 4-17 years old was designed. Risperidone dose titration was as follow: 0.02 mg/kg/day at the first week, 0.04 mg/kg/day at the second week, and 0.06 mg/kg/day at the third week and thereafter. The outcome measures were scores obtained by CARS, Aberrant Behavior Checklist (ABC), and Clinical Global Impression-Improvement (CGI-I) scale. Fifteen patients completed this study. After 8 weeks, CARS total score decreased significantly, (P=0.001). At the end of the study, social interactions and verbal communication skills of the patients were significantly improved (Pautistic disorder.

  7. Subcritical CO{sub 2} sintering of microspheres of different polymeric materials to fabricate scaffolds for tissue engineering

    Energy Technology Data Exchange (ETDEWEB)

    Bhamidipati, Manjari; Sridharan, BanuPriya [Bioengineering Graduate Program, University of Kansas, Lawrence, KS (United States); Scurto, Aaron M. [Bioengineering Graduate Program, University of Kansas, Lawrence, KS (United States); Department of Chemical and Petroleum Engineering, University of Kansas, Lawrence, KS (United States); Detamore, Michael S., E-mail: detamore@ku.edu [Bioengineering Graduate Program, University of Kansas, Lawrence, KS (United States); Department of Chemical and Petroleum Engineering, University of Kansas, Lawrence, KS (United States)

    2013-12-01

    The aim of this study was to use CO{sub 2} at sub-critical pressures as a tool to sinter 3D, macroporous, microsphere-based scaffolds for bone and cartilage tissue engineering. Porous scaffolds composed of ∼ 200 μm microspheres of either poly(lactic-co-glycolic acid) (PLGA) or polycaprolactone (PCL) were prepared using dense phase CO{sub 2} sintering, which were seeded with rat bone marrow mesenchymal stromal cells (rBMSCs), and exposed to either osteogenic (PLGA, PCL) or chondrogenic (PLGA) conditions for 6 weeks. Under osteogenic conditions, the PLGA constructs produced over an order of magnitude more calcium than the PCL constructs, whereas the PCL constructs had far superior mechanical and structural integrity (125 times stiffer than PLGA constructs) at week 6, along with twice the cell content of the PLGA constructs. Chondrogenic cell performance was limited in PLGA constructs, perhaps as a result of the polymer degradation rate being too high. The current study represents the first long-term culture of CO{sub 2}-sintered microsphere-based scaffolds, and has established important thermodynamic differences in sintering between the selected formulations of PLGA and PCL, with the former requiring adjustment of pressure only, and the latter requiring the adjustment of both pressure and temperature. Based on more straightforward sintering conditions and more favorable cell performance, PLGA may be the material of choice for microspheres in a CO{sub 2} sintering application, although a different PLGA formulation with the encapsulation of growth factors, extracellular matrix-derived nanoparticles, and/or buffers in the microspheres may be advantageous for achieving a more superior cell performance than observed here. - Highlights: • The first long-term culture of CO{sub 2}-sintered microsphere-based scaffolds. • Established important thermodynamic differences between sintering PLGA and PCL. • PCL sintering with CO{sub 2} required manipulation of both

  8. Encapsulated PDMS microspheres with reactive handles

    DEFF Research Database (Denmark)

    Gonzalez, Lidia; Ma, Baoguang; Li, Li

    2014-01-01

    , cured PDMS microspheres are coated with poly(methyl methacrylate) using a chemical process (solvent evaporation technique). Three solvents are used in three different experiments: dichloromethane, tetrahydrofuran, and acetone. The composition and morphology of the cured PDMS microspheres and PMMA coated...

  9. Microencapsulation and microspheres for food applications

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2015-01-01

    This book provides an update on the latest developments, challenges, and opportunities in the highly expanding field of microencapsulation and microspheres for food applications, examining the various types of microspheres and microcapsules essential to those who need to develop stable and

  10. Efficacy of Oral Risperidone, Haloperidol, or Placebo for Symptoms of Delirium Among Patients in Palliative Care: A Randomized Clinical Trial.

    Science.gov (United States)

    Agar, Meera R; Lawlor, Peter G; Quinn, Stephen; Draper, Brian; Caplan, Gideon A; Rowett, Debra; Sanderson, Christine; Hardy, Janet; Le, Brian; Eckermann, Simon; McCaffrey, Nicola; Devilee, Linda; Fazekas, Belinda; Hill, Mark; Currow, David C

    2017-01-01

    Antipsychotics are widely used for distressing symptoms of delirium, but efficacy has not been established in placebo-controlled trials in palliative care. To determine efficacy of risperidone or haloperidol relative to placebo in relieving target symptoms of delirium associated with distress among patients receiving palliative care. A double-blind, parallel-arm, dose-titrated randomized clinical trial was conducted at 11 Australian inpatient hospice or hospital palliative care services between August 13, 2008, and April 2, 2014, among participants with life-limiting illness, delirium, and a delirium symptoms score (sum of Nursing Delirium Screening Scale behavioral, communication, and perceptual items) of 1 or more. Age-adjusted titrated doses of oral risperidone, haloperidol, or placebo solution were administered every 12 hours for 72 hours, based on symptoms of delirium. Patients also received supportive care, individualized treatment of delirium precipitants, and subcutaneous midazolam hydrochloride as required for severe distress or safety. Improvement in mean group difference of delirium symptom score (severity range, 0-6) between baseline and day 3. Five a priori secondary outcomes: delirium severity, midazolam use, extrapyramidal effects, sedation, and survival. Two hundred forty-seven participants (mean [SD] age, 74.9 [9.8] years; 85 women [34.4%]; 218 with cancer [88.3%]) were included in intention-to-treat analysis (82 receiving risperidone, 81 receiving haloperidol, and 84 receiving placebo). In the primary intention-to-treat analysis, participants in the risperidone arm had delirium symptom scores that were significantly higher than those among participants in the placebo arm (on average 0.48 Units higher; 95% CI, 0.09-0.86; P = .02) at study end. Similarly, for those in the haloperidol arm, delirium symptom scores were on average 0.24 Units higher (95% CI, 0.06-0.42; P = .009) than in the placebo arm. Compared with placebo, patients in both

  11. Development and in vitro characterization of poly(lactide-co-glycolide microspheres loaded with an antibacterial natural drug for the treatment of long-term bacterial infections

    Directory of Open Access Journals (Sweden)

    Reinbold J

    2016-09-01

    -loaded microspheres was determined using transmission electron microscopy. No biofilm formation could be detected, even if the totarol concentration was below the minimal inhibitory concentration. The hemocompatibility investigations on various markers with fresh heparinized blood (1.5 IU/mL showed that totarol and totarol-loaded microspheres have no influence on different blood parameters. The PLGA microspheres characterized by slow release of totarol and great entrapment efficiency represent a novel drug delivery system, which may be highly beneficial for the long-term therapy of bacterial infections. Keywords: totarol, drug delivery system, Staphylococcus aureus, antibacterial, cytotoxicity

  12. Magnetic poly(glycidyl methacrylate) microspheres for protein capture.

    Science.gov (United States)

    Koubková, Jana; Müller, Petr; Hlídková, Helena; Plichta, Zdeněk; Proks, Vladimír; Vojtěšek, Bořivoj; Horák, Daniel

    2014-09-25

    The efficient isolation and concentration of protein antigens from complex biological samples is a critical step in several analytical methods, such as mass spectrometry, flow cytometry and immunochemistry. These techniques take advantage of magnetic microspheres as immunosorbents. The focus of this study was on the development of new superparamagnetic polymer microspheres for the specific isolation of the tumor suppressor protein p53. Monodisperse macroporous poly(glycidyl methacrylate) (PGMA) microspheres measuring approximately 5 μm and containing carboxyl groups were prepared by multistep swelling polymerization of glycidyl methacrylate (GMA), 2-[(methoxycarbonyl)methoxy]ethyl methacrylate (MCMEMA) and ethylene dimethylacrylate (EDMA) as a crosslinker in the presence of cyclohexyl acetate as a porogen. To render the microspheres magnetic, iron oxide was precipitated within their pores; the Fe content in the particles received ∼18 wt%. Nonspecific interactions between the magnetic particles and biological media were minimized by coating the microspheres with poly(ethylene glycol) (PEG) terminated by carboxyl groups. The carboxyl groups of the magnetic PGMA microspheres were conjugated with primary amino groups of mouse monoclonal DO-1 antibody using conventional carbodiimide chemistry. The efficiency of protein p53 capture and the degree of nonspecific adsorption on neat and PEG-coated magnetic microspheres were determined by western blot analysis. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Determinants of long acting and permanent contraceptive methods ...

    African Journals Online (AJOL)

    Introduction: In Ethiopia information on the level of utilization of the long term and ... determinant factors of long acting and permanent contraceptive methods use ... number of live children (AOR = 2.42, 95% CI: 1.46- 4.02), joint fertility related ...

  14. Albumin microspheres labeled with Ga-67 by chelation: concise communication

    International Nuclear Information System (INIS)

    Hnatowich, D.J.; Schlegel, P.

    1981-01-01

    Albumin microspheres have been synthesized with EDTA and DTPA chelating groups covalently bound to their surface. The microspheres may be labeled with Ga-67 at high yield (97 +- 2%) by transcomplexation from a 0.1 M Ga-67 acetate solution. With EDTA microspheres the resulting label dissociates only slightly after 24 hr in 50% plasma at 37 0 C, whereas with DTPA microspheres the label shows no detectable dissociation over this period. By contrast, microspheres without chelating groups lose their label virtually completely under these conditions. Following intravenous administration of sized Ga-67 DTPA microspheres in mice, about (84 +- 16)% of the activity localizes in the lungs at 5 min, with (60 +- 7)% remaining after 2 h. Since labeling is by chelation, the microspheres may also be tagged with other metallic radionuclides

  15. Sustained release donepezil loaded PLGA microspheres for injection: Preparation, in vitro and in vivo study

    Directory of Open Access Journals (Sweden)

    Wenjia Guo

    2015-10-01

    Full Text Available The purpose of this study was to develop a PLGA microspheres-based donepezil (DP formulation which was expected to sustain release of DP for one week with high encapsulation efficiency (EE. DP derived from donepezil hydrochloride was encapsulated in PLGA microspheres by the O/W emulsion-solvent evaporation method. The optimized formulation which avoided the crushing of microspheres during the preparation process was characterized in terms of particle size, morphology, drug loading and EE, physical state of DP in the matrix and in vitro and in vivo release behavior. DP microspheres were prepared successfully with average diameter of 30 µm, drug loading of 15.92 ± 0.31% and EE up to 78.79 ± 2.56%. Scanning electron microscope image showed it has integrated spherical shape with no drug crystal and porous on its surface. Differential scanning calorimetry and X-ray diffraction results suggested DP was in amorphous state or molecularly dispersed in microspheres. The Tg of PLGA was increased with the addition of DP. The release profile in vitro was characterized with slow but continuous release that lasted for about one week and fitted well with first-order model, which suggested the diffusion governing release mechanism. After single-dose administration of DP microspheres via subcutaneous injection in rats, the plasma concentration of DP reached peak concentration at 0.50 d, and then declined gradually, but was still detectable at 15 d. A good correlation between in vitro and in vivo data was obtained. The results suggest the potential use of DP microspheres for treatment of Alzheimer's disease over long periods.

  16. Clinical and pharmacokinetic evaluation of risperidone for the management of autism spectrum disorder

    NARCIS (Netherlands)

    Dinnissen, Mariken; Dietrich, Andrea; van den Hoofdakker, Barbara J.; Hoekstra, Pieter J.

    Introduction: Autism spectrum disorder (ASD) is a neurodevelopmental disorder that is often accompanied by psychiatric comorbidity. Although there is no medication currently available to treat the core symptoms of ASD, risperidone was the first drug to be approved for use in ASD and is still the

  17. Photoluminescence and lasing in whispering gallery mode glass microspherical resonators

    Energy Technology Data Exchange (ETDEWEB)

    Ristić, D. [Ruđer Bošković Institute, Division of Materials Physics, Laboratory for Molecular Physics, Bijenička c. 54, Zagreb (Croatia); Center of Excellence for Advanced Materials and Sensing Devices, Research unit New Functional Materials, Bijenička c. 54, Zagreb (Croatia); Berneschi, S.; Camerini, M. [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Farnesi, D.; Pelli, S. [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Centro Studi e Ricerche ' E. Fermi' , Piazza del Viminale 2, 00184 Roma (Italy); Trono, C. [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Chiappini, A.; Chiasera, A.; Ferrari, M. [CSMFO Group, Istituto di Fotonica e Nanotecnologie, IFN-CNR, Via alla Cascata 56/C, 38050 Povo-Trento (Italy); Lukowiak, A. [Institute of Low Temperature and Structure Research, PAS, ul. Okolna 2, Wroclaw 50-950 (Poland); Dumeige, Y.; Féron, P. [Laboratoire d' Optronique, (CNRS-UMR 6082-Foton), ENSSAT, 6 rue de Kérampont, 22300 Lannion (France); Righini, G.C. [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Centro Studi e Ricerche ' E. Fermi' , Piazza del Viminale 2, 00184 Roma (Italy); Soria, S., E-mail: s.soria@ifac.cnr.it [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Conti, G. Nunzi [IFAC-CNR Istituto di Fisica Applicata, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Centro Studi e Ricerche ' E. Fermi' , Piazza del Viminale 2, 00184 Roma (Italy)

    2016-02-15

    We report experimental results regarding the development of Er{sup 3+}-doped glass microspherical cavities for the fabrication of compact sources at 1.55 μm. We investigate several different approaches in order to fabricate the microspheres including direct melting of Er{sup 3+}-doped glass powders, synthesis of Er{sup 3+}-doped monolithic microspheres by drawing Er{sup 3+}-doped glass, and coating of silica microspheres with an Er{sup 3+}-doped sol–gel layer. Details of the different fabrication processes are presented together with the photoluminescence characterization in free space configuration of the microspheres and of the glass precursor. We have analyzed the photoluminescence spectra of the whispering gallery modes of the microspheres excited using evanescent coupling and we demonstrate tunable laser action in a wide range of wavelengths around 1.55 μm. As much as 90 μW of laser output power was measured in Er{sup 3+}-doped glass microspheres. - Highlights: • Different approaches in microsphere fabrication and various types of post-processing. • Trimming of photorefractive glass microsphere lasers with UV light. • Peak power record of 90 μW by pumping at 1480 nm.

  18. Hollow TiO2 modified reduced graphene oxide microspheres encapsulating hemoglobin for a mediator-free biosensor.

    Science.gov (United States)

    Liu, Hui; Guo, Kai; Duan, Congyue; Dong, Xiaonan; Gao, Jiaojiao

    2017-01-15

    Hollow TiO 2 modified reduced graphene oxide microspheres (hollow TiO 2 -rGO microspheres or H-TiO 2 -rGO MS) have been synthesized and then be used to immobilize hemoglobin (Hb) to fabricate a mediator-free biosensor. The morphology and structure of hollow TiO 2 -rGO microspheres were characterized by scanning electron microscopy, transmission electronic microscopy and X-ray diffraction. Results of spectroscopy and electrochemistry tests revealed that hollow TiO 2 -rGO microsphere is an excellent immobilization matrix with biocompatibility for redox protein, affording good protein bioactivity and stability. The hollow TiO 2 -rGO microspheres with special structure and component enhance the immobilization efficiency of proteins and facilitate the direct electron transfer, which result in the better H 2 O 2 detection performance-the wide linear range of 0.1-360μM for H 2 O 2 (sensitivity of 417.6 μA mM -1 cm -2 ) and the extremely low detection limit of 10nM for H 2 O 2 . Moreover, the hollow microsphere can provide a protective microenvironment for Hb to make the as-prepared biosensor improve long-term stability. The as-prepared biosensor retains 95.4% of the initial response to H 2 O 2 after 60-d storage. Hence, this work suggests that if can be fabricated a mediator-free biosensor, hollow TiO 2 -rGO microspheres will find wide potential applications in environmental analysis and biomedical detection. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Risperidone reverses the spatial object recognition impairment and hippocampal BDNF-TrkB signalling system alterations induced by acute MK-801 treatment

    Science.gov (United States)

    Chen, Guangdong; Lin, Xiaodong; Li, Gongying; Jiang, Diego; Lib, Zhiruo; Jiang, Ronghuan; Zhuo, Chuanjun

    2017-01-01

    The aim of the present study was to investigate the effects of a commonly-used atypical antipsychotic, risperidone, on alterations in spatial learning and in the hippocampal brain-derived neurotrophic factor (BDNF)-tyrosine receptor kinase B (TrkB) signalling system caused by acute dizocilpine maleate (MK-801) treatment. In experiment 1, adult male Sprague-Dawley rats subjected to acute treatment of either low-dose MK801 (0.1 mg/kg) or normal saline (vehicle) were tested for spatial object recognition and hippocampal expression levels of BDNF, TrkB and the phophorylation of TrkB (p-TrkB). We found that compared to the vehicle, MK-801 treatment impaired spatial object recognition of animals and downregulated the expression levels of p-TrkB. In experiment 2, MK-801- or vehicle-treated animals were further injected with risperidone (0.1 mg/kg) or vehicle before behavioural testing and sacrifice. Of note, we found that risperidone successfully reversed the deleterious effects of MK-801 on spatial object recognition and upregulated the hippocampal BDNF-TrkB signalling system. Collectively, the findings suggest that cognitive deficits from acute N-methyl-D-aspartate receptor blockade may be associated with the hypofunction of hippocampal BDNF-TrkB signalling system and that risperidone was able to reverse these alterations. PMID:28451387

  20. Determinants of long acting and permanent contraceptive methods ...

    African Journals Online (AJOL)

    Introduction: in Ethiopia information on the level of utilization of the long-term and ... determinant factors of long-acting and permanent contraceptive methods use ... 95% CI: 1.46- 4.02), joint fertility related decision (AOR = 6.11, 95% CI: 2.29- ...

  1. Optically Levitated Microspheres as a Probe for New Interactions

    Science.gov (United States)

    Rider, Alexander; Moore, David; Blakemore, Charles; Lu, Marie; Gratta, Giorgio

    2016-03-01

    We are developing novel techniques to probe new interactions at micron distances using optically levitated dielectric microspheres. Levitated microspheres are an ideal probe for short-range interactions because they are suspended using the radiation pressure at the focus of a laser beam, which means that the microspheres can be precisely manipulated and isolated from the surrounding environment at high vacuum. We have performed a search for unknown charged particles bound within the bulk of the microspheres. Currently, we are searching for the presence of a Chameleon field postulated to explain the presence of dark energy in the universe. In the future we plan to use optically levitated microspheres to search for micron length-scale gravity like interactions that could couple between a microsphere and another mass. We will present resent results from these experiments and plans for future searches for new interactions.

  2. Silicon Microspheres Photonics

    International Nuclear Information System (INIS)

    Serpenguzel, A.

    2008-01-01

    Electrophotonic integrated circuits (EPICs), or alternatively, optoelectronic integrated circuit (OEICs) are the natural evolution of the microelectronic integrated circuit (IC) with the addition of photonic capabilities. Traditionally, the IC industry has been based on group IV silicon, whereas the photonics industry on group III-V semiconductors. However, silicon based photonic microdevices have been making strands in siliconizing photonics. Silicon microspheres with their high quality factor whispering gallery modes (WGMs), are ideal candidates for wavelength division multiplexing (WDM) applications in the standard near-infrared communication bands. In this work, we will discuss the possibility of using silicon microspheres for photonics applications in the near-infrared

  3. Preparation of UN microspheres by internal gelation process

    Energy Technology Data Exchange (ETDEWEB)

    Shirasu, Yoshiro; Yamagishi, Shigeru [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1997-07-01

    UN microspheres were prepared from (UO{sub 3}+C) microspheres internally gelled in a hot silicone oil column. The gel microspheres were calcined at 480degC in nitrogen, after washing and drying. The calcined ones were carbothermically nitrided at 1400-1800degC in a nitrogen-based atmosphere in two ways: one in N{sub 2} followed by N{sub 2}-8%H{sub 2}, and the other in N{sub 2}-8%H{sub 2} only. In both cases, highly pure UN microspheres around 500 ppm of both oxygen and carbon impurities were obtained, although their densities were still low. (author)

  4. Surface and capillary forces encountered by zinc sulfide microspheres in aqueous electrolyte.

    Science.gov (United States)

    Gillies, Graeme; Kappl, Michael; Butt, Hans-Jürgen

    2005-06-21

    The colloid probe technique was used to investigate the interactions between individual zinc sulfide (ZnS) microspheres and an air bubble in electrolyte solution. Incorporation of zinc ions into the electrolyte solution overcomes the disproportionate zinc ion dissolution and mimics high-volume-fraction conditions common in flotation. Determined interaction forces revealed a distinct lack of long-ranged hydrophobic forces, indicated by the presence of a DLVO repulsion prior to particle engulfment. Single microsphere contact angles were determined from particle-bubble interactions. Contact angles increased with decreasing radii and with surface oxidation. Surface modification by the absorption of copper and subsequently potassium O-ethyldithiocarbonate (KED) reduced repulsive forces and strongly increased contact angles.

  5. Tic Reduction with Risperidone Versus Pimozide in a Randomized, Double-Blind, Crossover Trial

    Science.gov (United States)

    Gilbert, Donald L.; Batterson, J. Robert; Sethuraman, Gopalan; Sallee, Floyd R.

    2004-01-01

    Objective: To compare the tic suppression, electrocardiogram (ECG) changes, weight gain, and side effect profiles of pimozide versus risperidone in children and adolescents with tic disorders. Method: This was a randomized, double-blind, crossover (evaluable patient analysis) study. Nineteen children aged 7 to 17 years with Tourette's or chronic…

  6. 188Re-microspheres of albumin - the potential preparation for radiotherapy

    International Nuclear Information System (INIS)

    Dyomin, D.N.; Petriev, V.M.

    2000-01-01

    In this paper author describe preparation the albumin microspheres labelled with rhenium-188. We undertake an attempt to develop kits to the generator of rhenium-188 on the basis of albumin microspheres for radiotherapy of both oncological and non-oncological diseases. Microspheres, rhenium-188 with sizes 1 0-20 micron for treatment of rheumatoid arthritis (damage of large and intermediate joints), intraperitoneal administration and intrapleural administration at metastases covering a cavity. Microspheres, Re-188 with sizes 40-60 micron for treatment of disseminated kidney cancer (intraarterial, selectively), intratumoral administration to damaged nodules less than 2-3 cm. Microspheres, Re-188 with sizes 80-100 micron for large neoplasms and metastases of liver (intraarterial, selectively), intratumoral administration to damaged nodules with sizes over 3 cm. Preparation of albumin microspheres is carried out by thermal denaturation of protein in vegetable oil. Microspheres are obtained with the necessary range of sizes by ultrasonic fractionation. At our laboratory the method of preparation of albumin microspheres with any sizes of particles (from 5 -10 up to 800 -1000 microns) has been developed. (authors)

  7. Size-dependent filtration of nanoparticles on porous films composed by polystyrene microsphere monolayers and applications in site-selective deposition of nanoparticles

    International Nuclear Information System (INIS)

    Ruan, Weidong; Zhou, Tieli; Sun, Chengbin; Tao, Yanchun; Lu, Fei; Wang, Xu; Zhao, Bing; Cui, Yinqiu

    2015-01-01

    Composite films composed of polystyrene (PS) microsphere monolayers and gold (Au) and/or silver (Ag) nanoparticles (NPs) decorations were prepared by a novel size-dependent filtration effect on close-packed PS microsphere arrays. The uniform pores inlaid in the PS monolayer films acted as the transport tunnels for NPs. The steric restriction induced by the size of the pores was used as a main strategy to fabricate hybrid micro/nano films, which were composed of PS microspheres with inhomogeneous anisotropic decorations. The Au and Ag NPs were used as the building blocks to decorate the PS microspheres through a layer-by-layer self-assembly technique with the aid of polyelectrolyte coupling agents. Only the small particles which could pass through the micropores could reach to and deposit on the inner surfaces of the PS microsphere monolayer films. Large particles remained on the outside and could only deposit on the outer surfaces. Thus, the inhomogeneous anisotropic decoration was obtained. This study provides a novel strategy for fabricating anisotropic micro/nanostructures by the size-dependent filtration effect of NPs on porous films and has the potential in applications of anisotropic self-assembly, sensor, and surface modifications at nanoscale.

  8. Size-dependent filtration of nanoparticles on porous films composed by polystyrene microsphere monolayers and applications in site-selective deposition of nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Ruan, Weidong [Jilin University, State Key Laboratory of Supramolecular Structure and Materials (China); Zhou, Tieli [Changchun University, College of Food Engineering and Landscape Architecture (China); Sun, Chengbin; Tao, Yanchun; Lu, Fei; Wang, Xu; Zhao, Bing, E-mail: zhaob@mail.jlu.edu.cn [Jilin University, State Key Laboratory of Supramolecular Structure and Materials (China); Cui, Yinqiu, E-mail: cuiyq@jlu.edu.cn [Jilin University, School of Life Sciences (China)

    2015-10-15

    Composite films composed of polystyrene (PS) microsphere monolayers and gold (Au) and/or silver (Ag) nanoparticles (NPs) decorations were prepared by a novel size-dependent filtration effect on close-packed PS microsphere arrays. The uniform pores inlaid in the PS monolayer films acted as the transport tunnels for NPs. The steric restriction induced by the size of the pores was used as a main strategy to fabricate hybrid micro/nano films, which were composed of PS microspheres with inhomogeneous anisotropic decorations. The Au and Ag NPs were used as the building blocks to decorate the PS microspheres through a layer-by-layer self-assembly technique with the aid of polyelectrolyte coupling agents. Only the small particles which could pass through the micropores could reach to and deposit on the inner surfaces of the PS microsphere monolayer films. Large particles remained on the outside and could only deposit on the outer surfaces. Thus, the inhomogeneous anisotropic decoration was obtained. This study provides a novel strategy for fabricating anisotropic micro/nanostructures by the size-dependent filtration effect of NPs on porous films and has the potential in applications of anisotropic self-assembly, sensor, and surface modifications at nanoscale.

  9. A facile approach to fabricate Au nanoparticles loaded SiO{sub 2} microspheres for catalytic reduction of 4-nitrophenol

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Mingyi, E-mail: mingyitjucu@163.com [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Huang, Guanbo, E-mail: gbhuang2007@hotmail.com [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China); Li, Xianxian; Pang, Xiaobo [Department of Applied Chemistry, School of Science, Tianjin University of Commerce, Tianjin 300134 (China); Qiu, Haixia [Department of Chemistry, School of Science, Tianjin University, Tianjin 300072 (China)

    2015-07-15

    Hydrophilic and biocompatible macromolecules were used to improve and simplify the process for the fabrication of core/shell SiO{sub 2}@Au composite particles. The influence of polymers on the morphology of SiO{sub 2}@Au particles with different size of SiO{sub 2} cores was analyzed by transmission electron microscopy and scanning electron microscopy. The optical property of the SiO{sub 2}@Au particles was studied with UV–Vis spectroscopy. The results indicate that the structure and composition of macromolecules affect the morphology of Au layers on SiO{sub 2} microspheres. The SiO{sub 2}@Au particles prepared in the presence of polyvinyl alcohol (PVA) or polyvinylpyrrolidone (PVP) have thin and complete Au nanoshells owing to their inducing act in preferential growth of Au nanoparticles along the surface of SiO{sub 2} microspheres. SiO{sub 2}@Au particles can be also prepared from SiO{sub 2} microspheres modified with 3-aminopropyltrimethoxysilane in the presence of PVA or PVP. This offers a simple way to fabricate a Au layer on SiO{sub 2} or other microspheres. The SiO{sub 2}@Au particles demonstrated high catalytic activity in the reduction of 4-nitrophenol. - Highlights: • Facile direct deposition method for Au nanoparticles on silica microspheres. • Influence of different types of macromolecule on the formation of Au shell. • High catalytic performance of Au nanoparticles on silica microspheres.

  10. Deposition and retention patterns for 3-, 9-, and 15-micron latex microspheres inhaled by rats and guinea pigs

    International Nuclear Information System (INIS)

    Snipes, M.B.; Olson, T.R.; Yeh, H.C.

    1988-01-01

    This study was designed to determine the deposition patterns and fate of large particles inhaled by two species of small laboratory animals during nose breathing. Rats and guinea pigs inhaled 3-, 9-, or 15 micron polystyrene latex microspheres labeled with 46 Sc. Approximately 1.4% and 0.55% of the initial internally deposited body burden of 3-micron microspheres was in the alveolar region of the respiratory tract of rats and guinea pigs, respectively. None of the 9- or 15-micron microspheres were detected in the alveolar regions of the rats or guinea pigs. Ninety-five to 99% of the deposited microspheres cleared from these animals with biological half-times of 0.5-1.0 day. Most of the cleared radioactivity was in the feces. Approximations for long-term biological half-times for alveolar retention of the 3-micron microspheres were 63 days for rats and 83 days for guinea pigs. About 1% of the initial lung burden of 3-micron microspheres was translocated from lung to lung-associated lymph nodes in both species; none of the 9- or 15-micron microspheres were detected in those lymph nodes. Small fractions of the microspheres initially deposited in the airways of the head were retained with biological clearance half-times ranging from 9 to 350 days. Results from this study do not allow projections for deposition and retention patterns for similar particles inhaled by humans. Such projections must come from studies with humans, or from studies with animal species having deposition patterns for inhaled materials more comparable to those of humans

  11. Long-acting beta 2-agonists in chronic obstructive pulmonary disease.

    Science.gov (United States)

    Llewellyn-Jones, Carol

    2002-01-01

    Until recently, the use of long-acting beta 2-agonists in chronic obstructive pulmonary disease has been understated. There is now evidence that they may offer benefits beyond bronchodilation. This article reviews the management of chronic obstructive pulmonary disease and looks at the place of long-acting beta 2-agonists as a first-line treatment option.

  12. Microsphere-based super-resolution scanning optical microscope.

    Science.gov (United States)

    Huszka, Gergely; Yang, Hui; Gijs, Martin A M

    2017-06-26

    High-refractive index dielectric microspheres positioned within the field of view of a microscope objective in a dielectric medium can focus the light into a so-called photonic nanojet. A sample placed in such nanojet can be imaged by the objective with super-resolution, i.e. with a resolution beyond the classical diffraction limit. However, when imaging nanostructures on a substrate, the propagation distance of a light wave in the dielectric medium in between the substrate and the microsphere must be small enough to reveal the sample's nanometric features. Therefore, only the central part of an image obtained through a microsphere shows super-resolution details, which are typically ∼100 nm using white light (peak at λ = 600 nm). We have performed finite element simulations of the role of this critical distance in the super-resolution effect. Super-resolution imaging of a sample placed beneath the microsphere is only possible within a very restricted central area of ∼10 μm 2 , where the separation distance between the substrate and the microsphere surface is very small (∼1 μm). To generate super-resolution images over larger areas of the sample, we have fixed a microsphere on a frame attached to the microscope objective, which is automatically scanned over the sample in a step-by-step fashion. This generates a set of image tiles, which are subsequently stitched into a single super-resolution image (with resolution of λ/4-λ/5) of a sample area of up to ∼10 4 μm 2 . Scanning a standard optical microscope objective with microsphere therefore enables super-resolution microscopy over the complete field-of-view of the objective.

  13. Optimization of sustained release aceclofenac microspheres using response surface methodology

    Energy Technology Data Exchange (ETDEWEB)

    Deshmukh, Rameshwar K.; Naik, Jitendra B., E-mail: jitunaik@gmail.com

    2015-03-01

    Polymeric microspheres containing aceclofenac were prepared by single emulsion (oil-in-water) solvent evaporation method using response surface methodology (RSM). Microspheres were prepared by changing formulation variables such as the amount of Eudragit® RS100 and the amount of polyvinyl alcohol (PVA) by statistical experimental design in order to enhance the encapsulation efficiency (E.E.) of the microspheres. The resultant microspheres were evaluated for their size, morphology, E.E., and in vitro drug release. The amount of Eudragit® RS100 and the amount of PVA were found to be significant factors respectively for determining the E.E. of the microspheres. A linear mathematical model equation fitted to the data was used to predict the E.E. in the optimal region. Optimized formulation of microspheres was prepared using optimal process variables setting in order to evaluate the optimization capability of the models generated according to IV-optimal design. The microspheres showed high E.E. (74.14 ± 0.015% to 85.34 ± 0.011%) and suitably sustained drug release (minimum; 40% to 60%; maximum) over a period of 12 h. The optimized microspheres formulation showed E.E. of 84.87 ± 0.005 with small error value (1.39). The low magnitudes of error and the significant value of R{sup 2} in the present investigation prove the high prognostic ability of the design. The absence of interactions between drug and polymers was confirmed by Fourier transform infrared (FTIR) spectroscopy. Differential scanning calorimetry (DSC) and X-ray powder diffractometry (XRPD) revealed the dispersion of drug within microspheres formulation. The microspheres were found to be discrete, spherical with smooth surface. The results demonstrate that these microspheres could be promising delivery system to sustain the drug release and improve the E.E. thus prolong drug action and achieve the highest healing effect with minimal gastrointestinal side effects. - Highlights: • Aceclofenac microspheres

  14. Preparation of polymer microspheres by radiation-induced polymerization

    International Nuclear Information System (INIS)

    Naka, Y.; Yamamoto, Y.; Yoshida, Y.; Tagawa, S.

    1995-01-01

    Cross-liking monomer, diethylene glycol dimethacrylate gives microspheres from organic solution by radiation-induced polymerization. /One of the remarkable result is that the number of the microspheres is not changing during the polymerization. Ethyl methacrylate, maleic anhydride, styrene and acrylamide are used as comonomers. These comonomers give the microspheres in the range of 0 to 0.4 as mol fractions. (author)

  15. Preparation of nano-hydroxyapatite/poly(l-lactide) biocomposite microspheres

    International Nuclear Information System (INIS)

    Qiu Xueyu; Han Yadong; Zhuang Xiuli; Chen Xuesi; Li Yuesheng; Jing Xiabin

    2007-01-01

    Nano-hydroxyapatite (HA)/poly(l-lactide) (PLLA) composite microspheres with relatively uniform size distribution were prepared by a solid-in-oil-in-water (s/o/w) emusion solvent evaporation method. The encapsulation of the HA nanopaticles in microshperes was significantly improved by grafting PLLA on the surface of the HA nanoparticles (p-HA) during emulsion process. This procedure gave a possibility to obtain p-HA/PLLA composite microspheres with uniform morphology and the encapsulated p-HA nanoparticle loading reached up to 40 wt% (33 wt% of pure HA) in the p-HA/PLLA composite microspheres. The microstructure of composite microspheres from core-shell to single phase changed with the variation of p-HA to PLLA ratios. p-HA/PLLA composite microspheres with the diameter range of 2-3 μm were obtained. The entrapment efficiency of p-HA in microspheres could high up to 90 wt% and that of HA was only 13 wt%. Surface and bulk characterizations of the composite microspheres were performed by measurements such as wide angle X-ray diffraction (WAXD), thermal gravimetric analysis (TGA), environmental scanning electron microscope (ESEM) and transmission electron microscopy (TEM)

  16. No change of dopamine transporter density in basal ganglia after risperidone treatment in drug-naive children with Tourette's disorder

    Energy Technology Data Exchange (ETDEWEB)

    Ryu, W. K.; Ryu, Y. H.; Yoon, M. J.; Chun, K. A.; Lee, J. D. [College of Medicine, Univ. of Yonsei, Seoul (Korea, Republic of); Zee, D. Y. [Univ. of Inhwa, Incheon (Korea, Republic of); Choi, T. H. [Korea Cancer Center Hospital, Seoul (Korea, Republic of)

    2003-07-01

    Tourette's disorder (TD), which is characterized by multiple waxing and waning motor tics and one or more vocal tics, is known to be associated with abnormalities in the dopaminergic system. To testify our hypothesis that risperidone would improve tic symptoms of TD patients through the change of the dopaminergic system, we measured the DAT densities between drug-naive children with TD and normal children investigated the DAT density before and after treatment with risperidone in drug-naive children with TD, using lodine-123 labelled N-(3-iodopropen-2-yl)-2beta-carbomethoxy-3beta-(4-chlorophenyl) tropane(I-123 IPT) single photon emission computed tomography (SPECT). I-123 IPT SPECT imaging and Yale Global Tic Severity Scale-Korean version (YGTSS-K) for assessing the tic symptom severity were carried out before and after treatment with risperidone for 8 weeks in eight drug-naive children with TD. Eight normal children also underwent SPECT imaging 2 hours after an intravenous administration of I-123 IPT and carried out both quantitative and qualitative analyses using the obtained SPECT data, which were reconstructed for the assessment of the specific/non-specific DAT binding ratio in the basal ganglia. The drug-naive children with TD had a significantly greater increase in the specific/nonspecific DAT binding ratio of both basal ganglia compared with the normal children. However, no significant difference in the specific/nonspecific DAT binding ratio of the basal ganglia before and after treatment with riperidone in children with TD was not found, although tic symptoms were significantly improved with risperidone. These findings suggest that DAT densities are directly associated with the pathophysiology of TD, however, that the effect of risperidone on tic symptoms in children with TD is not attributed to the change of dopaminergic system.

  17. Thermal analysis of iron hydroxide microspheres

    International Nuclear Information System (INIS)

    Turcanu, C.N.; Cornescu, M.

    1979-03-01

    The thermal treatment is an important step in the preparative technology of the iron oxids microspheres with well established mechanical, physical and chemical characteristics. The first indications on the heating procedure have been obtained from the thermal analysis on iron hydroxide microspheres prepared by the support precipitation and internal gelification methods. (author)

  18. Ionothermal synthesis of hierarchical BiOBr microspheres for water treatment

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Dieqing [The Education Ministry Key Lab of Resource Chemistry and Shanghai Key Laboratory of Rare Earth Functional Materials, Shanghai Normal University, 100 Guilin Road, Shanghai 200231 (China); Department of Chemistry and Institute of Environment, Energy and Sustainability, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong (China); Wen, Meicheng; Jiang, Bo; Li, Guisheng [The Education Ministry Key Lab of Resource Chemistry and Shanghai Key Laboratory of Rare Earth Functional Materials, Shanghai Normal University, 100 Guilin Road, Shanghai 200231 (China); Yu, Jimmy C., E-mail: jimyu@cuhk.edu.hk [Department of Chemistry and Institute of Environment, Energy and Sustainability, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong (China)

    2012-04-15

    Graphical abstract: Hierarchical BiOBr microspheres were prepared from a bromine-containing ionic liquid. The material was found effective for removing heavy metals, degrading organic pollutants and killing bacteria. Highlight: Black-Right-Pointing-Pointer Ionothermal synthesis of BiOBr microspheres with hierarchical structure. Black-Right-Pointing-Pointer Efficient mass transfer and excellent light-harvesting ability. Black-Right-Pointing-Pointer Suitable for removing heavy metals and treatment of organic dyes. Black-Right-Pointing-Pointer Remarkable photocatalytic bactericidal property. - Abstract: Bismuth oxybromide (BiOBr) micropsheres with hierarchical morphologies have been fabricated via an ionothermal synthesis route. Ionic liquid acts as a unique soft material capable of promoting nucleation and in situ growth of 3D hierarchical BiOBr mesocrystals without the help of surfactants. The as-prepared BiOBr nanomaterials can effectively remove heavy metal ions and organic dyes from wastewater. They can also kill Micrococcus lylae, a Gram positive bacterium, in water under fluorescent light irradiation. Their high adaptability in water treatment may be ascribed to their hierarchical structure, allowing them high surface to volume ratio, facile species transportation and excellent light-harvesting ability.

  19. Ionothermal synthesis of hierarchical BiOBr microspheres for water treatment

    International Nuclear Information System (INIS)

    Zhang, Dieqing; Wen, Meicheng; Jiang, Bo; Li, Guisheng; Yu, Jimmy C.

    2012-01-01

    Graphical abstract: Hierarchical BiOBr microspheres were prepared from a bromine-containing ionic liquid. The material was found effective for removing heavy metals, degrading organic pollutants and killing bacteria. Highlight: ► Ionothermal synthesis of BiOBr microspheres with hierarchical structure. ► Efficient mass transfer and excellent light-harvesting ability. ► Suitable for removing heavy metals and treatment of organic dyes. ► Remarkable photocatalytic bactericidal property. - Abstract: Bismuth oxybromide (BiOBr) micropsheres with hierarchical morphologies have been fabricated via an ionothermal synthesis route. Ionic liquid acts as a unique soft material capable of promoting nucleation and in situ growth of 3D hierarchical BiOBr mesocrystals without the help of surfactants. The as-prepared BiOBr nanomaterials can effectively remove heavy metal ions and organic dyes from wastewater. They can also kill Micrococcus lylae, a Gram positive bacterium, in water under fluorescent light irradiation. Their high adaptability in water treatment may be ascribed to their hierarchical structure, allowing them high surface to volume ratio, facile species transportation and excellent light-harvesting ability.

  20. Risperidone treatment for ADHD in children and adolescents with bipolar disorder

    OpenAIRE

    Biederman, Joseph

    2008-01-01

    Joseph Biederman, Paul Hammerness, Robert Doyle, Gagan Joshi, Megan Aleardi, Eric MickPediatric Psychopharmacology Research Department, Massachusetts General Hospital, Boston, MA, USAObjective: Children and adolescents with bipolar disorder are also at high risk of having comorbid attention-deficit hyperactivity disorder (ADHD). The objective of this study was to estimate improvement in ADHD symptoms in children with bipolar disorder.Methods: This was an open-label, study of risperidone monot...

  1. Nanomechanics of biocompatible hollow thin-shell polymer microspheres.

    Science.gov (United States)

    Glynos, Emmanouil; Koutsos, Vasileios; McDicken, W Norman; Moran, Carmel M; Pye, Stephen D; Ross, James A; Sboros, Vassilis

    2009-07-07

    The nanomechanical properties of biocompatible thin-shell hollow polymer microspheres with approximately constant ratio of shell thickness to microsphere diameter were measured by nanocompression tests in aqueous conditions. These microspheres encapsulate an inert gas and are used as ultrasound contrast agents by releasing free microbubbles in the presence of an ultrasound field as a result of free gas leakage from the shell. The tests were performed using an atomic force microscope (AFM) employing the force-distance curve technique. An optical microscope, on which the AFM was mounted, was used to guide the positioning of tipless cantilevers on top of individual microspheres. We performed a systematic study using several cantilevers with spring constants varying from 0.08 to 2.3 N/m on a population of microspheres with diameters from about 2 to 6 microm. The use of several cantilevers with various spring constants allowed a systematic study of the mechanical properties of the microsphere thin shell at different regimes of force and deformation. Using thin-shell mechanics theory for small deformations, the Young's modulus of the thin wall material was estimated and was shown to exhibit a strong size effect: it increased as the shell became thinner. The Young's modulus of thicker microsphere shells converged to the expected value for the macroscopic bulk material. For high applied forces, the force-deformation profiles showed a reversible and/or irreversible nonlinear behavior including "steps" and "jumps" which were attributed to mechanical instabilities such as buckling events.

  2. Different effects of paliperidone and risperidone therapy on blood lipid and Hcy metabolism as well as endocrine hormones in patients with schizophrenia

    OpenAIRE

    Bei-Fang Fan; Ze-Hui Li; Shuo Yang; Cai-Hong Gao

    2017-01-01

    Objective: To explore the different effects of paliperidone and risperidone therapy on blood lipid and Hcy metabolism as well as endocrine hormones in patients with schizophrenia. Methods: A total of 118 patients with schizophrenia who were treated in the hospital between December 2014 and February 2017 were collected as the research subjects and divided into control group and study group by random number table, each group with 59 cases. Control group received risperidone thera...

  3. Long-acting insulins alter milk composition and metabolism of lactating dairy cows.

    Science.gov (United States)

    Winkelman, L A; Overton, T R

    2013-01-01

    This study investigated the effect of 2 different types of long-acting insulin on milk production, milk composition, and metabolism in lactating dairy cows. Multiparous cows (n=30) averaging 88 d in milk were assigned to one of 3 treatments in a completely randomized design. Treatments consisted of control (C), Humulin-N (H; Eli Lilly and Company, Indianapolis, IN), and insulin glargine (L). The H and L treatments were administered twice daily at 12-h intervals via subcutaneous injection for 10d. Cows were milked twice daily, and milk composition was determined every other day. Mammary biopsies were conducted on d 11, and mammary proteins extracted from the biopsies were analyzed by Western blot for components of insulin and mammalian target of rapamycin signaling pathways. Treatment had no effect on dry matter intake or milk yield. Treatment with both forms of long-acting insulin increased milk protein content and tended to increase milk protein yield over the 10-d treatment period. Analysis of milk N fractions from samples collected on d 10 of treatment suggested that cows administered L tended to have higher yields of milk protein fractions than cows administered H. Milk fat content and yield tended to be increased for cows administered long-acting insulins. Lactose content and yields were decreased by treatment with long-acting insulins. Administration of long-acting insulins, particularly L, tended to shift milk fatty acid composition toward increased short- and medium-chain fatty acids and decreased long-chain fatty acids. Plasma concentrations of glucose and urea N were lower for cows administered long-acting insulins; interactions of treatment and sampling time were indicative of more pronounced effects of L than H on these metabolites. Concentrations of nonesterified fatty acids and insulin were increased in cows administered long-acting insulins. Decreased concentrations of urea N in both plasma and milk suggested more efficient use of N in cows

  4. Preparing microspheres of actinide nitrides from carbon containing oxide sols

    International Nuclear Information System (INIS)

    Triggiani, L.V.

    1975-01-01

    A process is given for preparing uranium nitride, uranium oxynitride, and uranium carboxynitride microspheres and the microspheres as compositions of matter. The microspheres are prepared from carbide sols by reduction and nitriding steps. (Official Gazette)

  5. Mesoporous metal oxide microsphere electrode compositions and their methods of making

    Science.gov (United States)

    Parans Paranthaman, Mariappan; Bi, Zhonghe; Bridges, Craig A.; Brown, Gilbert M.

    2017-04-11

    Compositions and methods of making are provided for treated mesoporous metal oxide microspheres electrodes. The compositions include microspheres with an average diameter between about 200 nanometers and about 10 micrometers and mesopores on the surface and interior of the microspheres. The methods of making include forming a mesoporous metal oxide microsphere composition and treating the mesoporous metal oxide microspheres by at least annealing in a reducing atmosphere, doping with an aliovalent element, and coating with a coating composition.

  6. In vitro Evaluation of Nateglinide-Loaded Microspheres Formulated ...

    African Journals Online (AJOL)

    Keywords: Nateglinide, Microspheres, Micromeritics, Drug release, Ionic ... Oral drug delivery systems (DDS) are commonly divided into immediate release and modified release systems. ..... Albumin Microspheres for Potential Intramuscular.

  7. Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres

    International Nuclear Information System (INIS)

    Song, Kedong; Liu, Yingchao; Macedo, Hugo M.; Jiang, Lili; Li, Chao; Mei, Guanyu; Liu, Tianqing

    2013-01-01

    Nutrient depletion within three-dimensional (3D) scaffolds is one of the major hurdles in the use of this technology to grow cells for applications in tissue engineering. In order to help in addressing it, we herein propose to use the controlled release of encapsulated nutrients within polymer microspheres into chitosan-based 3D scaffolds, wherein the microspheres are embedded. This method has allowed maintaining a stable concentration of nutrients within the scaffolds over the long term. The polymer microspheres were prepared using multiple emulsions (w/o/w), in which bovine serum albumin (BSA) and poly (lactic-co-glycolic) acid (PLGA) were regarded as the protein pattern and the exoperidium material, respectively. These were then mixed with a chitosan solution in order to form the scaffolds by cryo-desiccation. The release of BSA, entrapped within the embedded microspheres, was monitored with time using a BCA kit. The morphology and structure of the PLGA microspheres containing BSA before and after embedding within the scaffold were observed under a scanning electron microscope (SEM). These had a round shape with diameters in the range of 27–55 μm, whereas the chitosan-based scaffolds had a uniform porous structure with the microspheres uniformly dispersed within their 3D structure and without any morphological change. In addition, the porosity, water absorption and degradation rate at 37 °C in an aqueous environment of 1% chitosan-based scaffolds were (92.99 ± 2.51) %, (89.66 ± 0.66) % and (73.77 ± 3.21) %, respectively. The studies of BSA release from the embedded microspheres have shown a sustained and cumulative tendency with little initial burst, with (20.24 ± 0.83) % of the initial amount released after 168 h (an average rate of 0.12%/h). The protein concentration within the chitosan-based scaffolds after 168 h was found to be (11.44 ± 1.81) × 10 −2 mg/mL. This novel chitosan-based scaffold embedded with PLGA microspheres has proven to be a

  8. Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kedong, E-mail: kedongsong@dlut.edu.cn [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Liu, Yingchao [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Macedo, Hugo M. [Biological Systems Engineering Laboratory, Department of Chemical Engineering, Department of Chemical Engineering, South Kensington Campus, London SW7 2AZ (United Kingdom); Jiang, Lili; Li, Chao; Mei, Guanyu [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Liu, Tianqing, E-mail: liutq@dlut.edu.cn [Dalian R and D Center for Stem Cell and Tissue Engineering, State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

    2013-04-01

    Nutrient depletion within three-dimensional (3D) scaffolds is one of the major hurdles in the use of this technology to grow cells for applications in tissue engineering. In order to help in addressing it, we herein propose to use the controlled release of encapsulated nutrients within polymer microspheres into chitosan-based 3D scaffolds, wherein the microspheres are embedded. This method has allowed maintaining a stable concentration of nutrients within the scaffolds over the long term. The polymer microspheres were prepared using multiple emulsions (w/o/w), in which bovine serum albumin (BSA) and poly (lactic-co-glycolic) acid (PLGA) were regarded as the protein pattern and the exoperidium material, respectively. These were then mixed with a chitosan solution in order to form the scaffolds by cryo-desiccation. The release of BSA, entrapped within the embedded microspheres, was monitored with time using a BCA kit. The morphology and structure of the PLGA microspheres containing BSA before and after embedding within the scaffold were observed under a scanning electron microscope (SEM). These had a round shape with diameters in the range of 27–55 μm, whereas the chitosan-based scaffolds had a uniform porous structure with the microspheres uniformly dispersed within their 3D structure and without any morphological change. In addition, the porosity, water absorption and degradation rate at 37 °C in an aqueous environment of 1% chitosan-based scaffolds were (92.99 ± 2.51) %, (89.66 ± 0.66) % and (73.77 ± 3.21) %, respectively. The studies of BSA release from the embedded microspheres have shown a sustained and cumulative tendency with little initial burst, with (20.24 ± 0.83) % of the initial amount released after 168 h (an average rate of 0.12%/h). The protein concentration within the chitosan-based scaffolds after 168 h was found to be (11.44 ± 1.81) × 10{sup −2} mg/mL. This novel chitosan-based scaffold embedded with PLGA microspheres has proven to be a

  9. Fabrication and evaluation of a sustained-release chitosan-based scaffold embedded with PLGA microspheres.

    Science.gov (United States)

    Song, Kedong; Liu, Yingchao; Macedo, Hugo M; Jiang, Lili; Li, Chao; Mei, Guanyu; Liu, Tianqing

    2013-04-01

    Nutrient depletion within three-dimensional (3D) scaffolds is one of the major hurdles in the use of this technology to grow cells for applications in tissue engineering. In order to help in addressing it, we herein propose to use the controlled release of encapsulated nutrients within polymer microspheres into chitosan-based 3D scaffolds, wherein the microspheres are embedded. This method has allowed maintaining a stable concentration of nutrients within the scaffolds over the long term. The polymer microspheres were prepared using multiple emulsions (w/o/w), in which bovine serum albumin (BSA) and poly (lactic-co-glycolic) acid (PLGA) were regarded as the protein pattern and the exoperidium material, respectively. These were then mixed with a chitosan solution in order to form the scaffolds by cryo-desiccation. The release of BSA, entrapped within the embedded microspheres, was monitored with time using a BCA kit. The morphology and structure of the PLGA microspheres containing BSA before and after embedding within the scaffold were observed under a scanning electron microscope (SEM). These had a round shape with diameters in the range of 27-55 μm, whereas the chitosan-based scaffolds had a uniform porous structure with the microspheres uniformly dispersed within their 3D structure and without any morphological change. In addition, the porosity, water absorption and degradation rate at 37 °C in an aqueous environment of 1% chitosan-based scaffolds were (92.99±2.51) %, (89.66±0.66) % and (73.77±3.21) %, respectively. The studies of BSA release from the embedded microspheres have shown a sustained and cumulative tendency with little initial burst, with (20.24±0.83) % of the initial amount released after 168 h (an average rate of 0.12%/h). The protein concentration within the chitosan-based scaffolds after 168 h was found to be (11.44±1.81)×10(-2) mg/mL. This novel chitosan-based scaffold embedded with PLGA microspheres has proven to be a promising technique

  10. Study on the Degradation of Polylactide Microsphere In Vitro

    Institute of Scientific and Technical Information of China (English)

    HeYing; WeiShuli

    2001-01-01

    This report concentrated on the rules and mechanism of the degradation of polylactide and the microspheres. The rate of degradation was assessed with five methods: observation of microsphere surface morphology by SEM, determination of the weight loss of the microspheres, determination of the molecular mass of the polymers by GPC, determination of pH and determination of the contents of lactic acid by UV spectrophotometry. The degradation of polylactide microspheres showed two-phase characteristics. At the early stage of the degradation, the high molecular mass polymers were cleaved into lower molecular mass fractions and at the late stage, there was a period of erosion and weight loss of the microspheres. The degradation was much slower for polymers with a higher molecular mass. The polylactide degradation showed good regularity.

  11. Preparation and Characterization of Fluorescent SiO2 Microspheres

    Science.gov (United States)

    Xu, Cui; Zhang, Hao; Guan, Ruifang

    2018-01-01

    Fluorescent compound without typical fluorophores was synthesized with citric acid (CA) and aminopropyltriethoxysilane (APTS) firstly, and then it was grafted to the surface of the prepared SiO2 microspheres by chemical reaction. The fluorescent SiO2 microspheres with good fluorescent properties were obtained by optimizing the reaction conditions. And the morphology and structure of the fluorescent SiO2 microspheres have been characterized by scanning electron microscopy (SEM) and fourier transform infrared (FTIR) spectroscopy. The results showed that the preparation of fluorescent SiO2 microspheres have good monodispersity and narrow particle size distribution. Moreover, the fluorescent SiO2 microspheres can be applied to detect Fe3+ in aqueous solution, prepare fluorescent SiO2 rubber, and have potential to be applied in the fluorescent labeling and fingerprint appearing technique fields.

  12. Frequency of Extrapyramidal Adverse Reactions in Schizophrenic Outpatients Treated with Risperidone, Olanzapine, Quetiapine or Haloperidol : Results of the EIRE Study.

    Science.gov (United States)

    Bobes, Julio; Rejas, J; Garcia-Garcia, M; Rico-Villademoros, F; García-Portilla, M P; Madrigal, M; Hernández, G

    2002-09-01

    The EIRE (Estudio de Investigaciön de Resultados en Esquizofrenia - Outcomes Research Study in Schizophrenia) study was initiated in order to assess the frequency of adverse reactions [extrapyramidal symptoms (EPS), hyperprolactinaemia, sexual dysfunction and weight gain] caused by atypical antipsychotics and haloperidol in patients with schizophrenia during routine treatment in clinical practice. This paper presents the results of the assessment of extrapyramidal adverse reactions. Outpatients diagnosed with schizophrenia according to the Diagnostic and Statistical Manual of mental disorders, 4th edition (DSM-IV), criteria and receiving a single antipsychotic (risperidone, olanzapine, quetiapine or haloperidol) for at least 4 weeks were consecutively recruited. In this cross-sectional and non-interventional study data were collected in a single visit; this included demographic and clinical characteristics, current antipsychotic and concomitant treatment, and data on several adverse effects listed in a modified version of the UKU (Udvalg for Kliniske Undersogelser - Committee on Clinical Investigations) scale. For paired comparisons of the frequency of adverse reactions between treatments the Chi-squared (χ 2 ) test was used. For estimation of the risk of a given adverse reaction with a given treatment a logistic regression method was used. 636 evaluable patients (of 669 recruited) were assessed. The frequency of EPS with haloperidol (78.3% of the cases) was higher than with risperidone (55.1%), quetiapine (39.5%) and olanzapine (35.8%) [χ 2 : p < 0.05], and the difference between risperidone and olanzapine was also statistically significant (χ 2 : p < 0.05). Very similar results were obtained in the individualised analysis of the items as regards the occurrence of akathisia, which was also more frequent in the haloperidol (36.8%) and risperidone (19.7%) groups than in the olanzapine (11.4%) and quetiapine (2.6%) groups (χ 2 : p < 0.05). Olanzapine, quetiapine

  13. Anti-depressive effectiveness of olanzapine, quetiapine, risperidone and ziprasidone: a pragmatic, randomized trial

    Directory of Open Access Journals (Sweden)

    Løberg Else-Marie

    2011-08-01

    Full Text Available Abstract Background Efficacy studies indicate anti-depressive effects of at least some second generation antipsychotics (SGAs. The Bergen Psychosis Project (BPP is a 24-month, pragmatic, industry-independent, randomized, head-to-head comparison of olanzapine, quetiapine, risperidone and ziprasidone in patients acutely admitted with psychosis. The aim of the study is to investigate whether differential anti-depressive effectiveness exists among SGAs in a clinically relevant sample of patients acutely admitted with psychosis. Methods Adult patients acutely admitted to an emergency ward for psychosis were randomized to olanzapine, quetiapine, risperidone or ziprasidone and followed for up to 2 years. Participants were assessed repeatedly using the Positive and Negative Syndrome Scale - Depression factor (PANSS-D and the Calgary Depression Scale for Schizophrenia (CDSS. Results A total of 226 patients were included. A significant time-effect showing a steady decline in depressive symptoms in all medication groups was demonstrated. There were no substantial differences among the SGAs in reducing the PANSS-D score or the CDSS sum score. Separate analyses of groups with CDSS sum scores > 6 or ≤6, respectively, reflecting degree of depressive morbidity, revealed essentially identical results to the primary analyses. There was a high correlation between the PANSS-D and the CDSS sum score (r = 0.77; p Conclusions There was no substantial difference in anti-depressive effectiveness among olanzapine, quetiapine, risperidone or ziprasidone in this clinically relevant sample of patients acutely admitted to hospital for symptoms of psychosis. Based on our findings we can make no recommendations concerning choice of any particular SGA for targeting symptoms of depression in a patient acutely admitted with psychosis. Trial Registration ClinicalTrials.gov ID; URL: http://www.clinicaltrials.gov/: NCT00932529

  14. Robust platforms for creating organic-inorganic nanocomposite microspheres: decorating polymer microspheres containing mussel-inspired adhesion layers with inorganic nanoparticles.

    Science.gov (United States)

    Satoh, H; Saito, Y; Yabu, H

    2014-12-07

    We describe a method for creating robust and stable core-shell polymer microspheres decorated with inorganic (IO) nanoparticles (NPs) by a self-organization process and heterocoagulation using a mussel-inspired polymer adhesive layer between the IO NPs and the microspheres.

  15. Study of the focusing effect of silica microspheres on the upconversion of Er3+–Yb3+ codoped glass ceramics

    International Nuclear Information System (INIS)

    Pérez-Rodríguez, C.; Imanieh, M.H.; Martín, L.L; Ríos, S.; Martín, I.R.; Yekta, Bijan Eftekhari

    2013-01-01

    Highlights: •Silica microspheres have been located on the surface of glass and glass ceramics samples codoped with Er and Yb. •Microspheres act as microlens of the 950 nm excitation light resulting in focalized excited regions in the samples with sizes under the micron. •Intense red upconversion is achieved in the focalized areas. •Microspheres collect the upconversion emission light, scoping with the together microlensing properties an enhancement of the detected signal in a 3x factor. •Performed Finite-Difference Time-Domain simulations predict the size of the focalized regions in good agreement with the experimental measurements. -- Abstract: The upconversion emission properties of Er 3+ –Yb 3+ codoped glass and glass ceramic samples with different Si/Al ratios and thermal treatments were analyzed by covering their surfaces with silica microspheres (3.8 μm diameter). A 950 nm laser beam is focused by the microspheres producing a set of photonic nanojets near the surface of the samples. After the upconversion processes of the Er 3+ ions located in each microsphere focus area, these ions emit light in the green and red regions. The red emission from each sample was measured, yielding an upconversion intensity in the focal areas three times higher than the emission from the bare substrate. To estimate the real size of the red emission area under a single microsphere, a deconvolution of the measured focal spots with the Point Spread Function of the experimental setup was performed, resulting in a Full Width at Half Maximum of 330 nm. The results obtained by Finite-Difference Time-Domain simulations are in good agreement with the experimental values

  16. 5-Fluorouracil:carnauba wax microspheres for chemoembolization: an in vitro evaluation.

    Science.gov (United States)

    Benita, S; Zouai, O; Benoit, J P

    1986-09-01

    5-Fluorouracil:carnauba wax microspheres were prepared using a meltable dispersion process with the aid of a surfactant as a wetting agent. It was noted that only hydrophilic surfactants were able to wet the 5-fluorouracil and substantially increased its content in the microspheres. No marked effect was observed in the particle size distribution of the solid microspheres as a function of the nature of the surfactant. Increasing the stirring rate in the preparation process decreased, first, the mean droplet size of the emulsified melted dispersion in the vehicle during the heating process, and, consequently, the mean particle size of the solidified microspheres during the cooling process. 5-Fluorouracil cumulative release from the microspheres followed first-order kinetics, as shown by nonlinear regression analysis. Although the kinetic results were not indicative of the true release mechanism from a single microsphere, it was believed that 5-fluorouracil release from the microspheres was probably governed by a dissolution process, rather than by a leaching process through the carnauba wax microspheres.

  17. Improvement of survival in C6 rat glioma model by a sustained drug release from localized PLGA microspheres in a thermoreversible hydrogel.

    Science.gov (United States)

    Ozeki, Tetsuya; Kaneko, Daiki; Hashizawa, Kosuke; Imai, Yoshihiro; Tagami, Tatsuaki; Okada, Hiroaki

    2012-05-10

    A local drug delivery system based on sustained drug release is an attractive approach to treat brain tumors. We have developed a novel device using drug-incorporated poly(lactic-co-glycolic acid) (PLGA) microspheres embedded in thermoreversible gelation polymer (TGP) formulation (drug/PLGA/TGP formulation). TGP forms a gel at body temperature but sol at room temperature. Therefore, when this formulation is injected into the brain tumor, the PLGA microspheres in TGP gel are localized at the injection site and do not diffuse throughout the brain tissue; eventually, sustained drug release from PLGA microspheres is achieved at the target site. In this study, two chemotherapeutic drugs (camptothecin (CPT) or vincristine (VCR)) were incorporated into PLGA microspheres to prepare drug/PLGA/TGP formulations. VCR/PLGA microspheres exhibited the higher encapsulation efficiency than CPT/PLGA microspheres (70.1% versus 30.1%). In addition, VCR/PLGA microspheres showed a higher sustained release profile than CPT/PLGA microspheres (54.5% versus 72.5% release, at 28 days). Therapeutic effect (mean survival) was evaluated in the C6 rat glioma model (control group, 18 days; CPT/PLGA/TGP treatment group, 24 days; VCR/PLGA/TGP treatment group, 33 days). In particular, the VCR/PLGA/TGP formulation produced long-term survivors (>60 days). Therefore, this formulation can be therapeutically effective formulation for the glioma therapy. Copyright © 2012 Elsevier B.V. All rights reserved.

  18. Dopamine D2 receptor occupancy by olanzapine or risperidone in young patients with schizophrenia

    NARCIS (Netherlands)

    Lavalaye, J.; Linszen, D. H.; Booij, J.; Reneman, L.; Gersons, B. P.; van Royen, E. A.

    1999-01-01

    A crucial characteristic of antipsychotic medication is the occupancy of the dopamine (DA) D2 receptor. We assessed striatal DA D2 receptor occupancy by olanzapine and risperidone in 36 young patients [31 males, 5 females; mean age 21.1 years (16-28)] with first episode schizophrenia, using

  19. Preparation of porous zirconia microspheres by internal gelation method

    International Nuclear Information System (INIS)

    Pathak, Sachin S.; Pius, I.C.; Bhanushali, R.D.; Rao, T.V. Vittal; Mukerjee, S.K.

    2008-01-01

    A modified internal gelation process for the preparation of porous zirconia microspheres has been developed. The conventional method has been modified by adding a surfactant in the feed broth. The effects of variation of surfactant concentration, washing techniques and temperature of calcination on the pore volume and the surface area of the microspheres have been studied. The conditions were optimized to obtain porous stable microspheres suitable for various applications. The microspheres were characterized by surface area analysis, pore volume analysis, thermogravimetric analysis and X-ray diffraction. The ion exchange behavior was studied using pH titration

  20. Effect of various polymers concentrations on physicochemical properties of floating microspheres.

    Science.gov (United States)

    Jagtap, Y M; Bhujbal, R K; Ranade, A N; Ranpise, N S

    2012-11-01

    Floating microspheres have emerged as a potential candidate for gastroretentive drug delivery system. For developing a desired intragastric floatation system employing these microspheres, it is necessary to select an appropriate balance between buoyancy and drug releasing rate. These properties mainly depend on the polymers used in the formulation of the microspheres. Hence it is necessory to study the effect of these polymer concentrations on the various physicochemical properties of the microspheres. Floating microspheres were prepared by emulsion solvent evaporation technique utilising different polymers such as ethyl cellulose, Eudragit(®) RS and Eudragit(®) RL by dissolving them in a mixture of dichloromethane and methanol. Release modifiers studied were hydroxypropyl methylcellulose K4M, hydroxypropyl methylcellulose E50 LV and Eudragit(®) EPO. Prepared microspheres were analysed for particle size, surface morphology, entrapment efficiency, buoyancy, differential scanning calorimetry and in-vitro drug release. Ethyl cellulose and Eudragit(®) EPO resulted microspheres with high percentage yield, excellent spherical shape but had very less buoyancies with a high cumulative drug release. Ethyl cellulose microspheres prepared using hydroxypropyl methylcellulose K4M showed more sustained drug release and high buoyancies than that of the microspheres formulated with the hydroxypropyl methylcellulose E50 LV. Amongst these hydroxypropyl methylcellulose E50 LV showed good balance between buoyancy and the drug release.

  1. Synthesis, recognition and evaluation of molecularly imprinted polymer nanoparticle using miniemulsion polymerization for controlled release and analysis of risperidone in human plasma samples

    International Nuclear Information System (INIS)

    Asadi, Ebadullah; Azodi-Deilami, Saman; Abdouss, Majid; Kordestani, Davood; Rahimi, Alireza; Asadi, Somayeh

    2014-01-01

    We prepared high selective imprinted nanoparticle polymers by a miniemulsion polymerization technique, using risperidone as the template, MAA as the functional monomers, and TRIM as the cross-linker in acetonitrile as solvent. The morphology of the nanoparticles determined by scanning electron microscopy (SEM) images and drug release, binding properties and dynamic light scattering (DLS) of molecularly imprinted polymers (MIPs) were studied. Controlled release of risperidone from nanoparticles was investigated through in 1% wt sodium dodecyl sulfate aqueous solution and by measuring the absorbance by HPLC-UV. The results showed that the imprinted nanoparticles exhibited a higher binding level and slower release rate than non-imprinted nanoparticles, which contributed to interaction of risperidone with imprinted cavities within nanoparticles. Furthermore, the results from HPLC showed good precision (5% for 50.0 µg L -1 ) and recoveries (between 86-91) using MIP from human plasma samples

  2. Biocompatibility of Polyhydroxybutyrate Microspheres: in vitro and in vivo Evaluation

    OpenAIRE

    Shishatskaya, Ekaterina I.; Voinova, Olga N.; Goreva, Anastasya V.; Mogilnaya, Olga A.; Volova, Tatiana G.

    2008-01-01

    Microspheres have been prepared from the resorbable linear polyester of β-hydroxybutyric acid (polyhydroxybutyrate, PHB) by the solvent evaporation technique and investigated in vitro and in vivo. Biocompatibility of the microspheres has been proved in tests in the culture of mouse fibroblast cell line NIH 3Т3 and in experiments on intramuscular implantation of the microspheres to Wistar rats for 3 months. Tissue response to the implantation of polymeric microspheres has been found to consist...

  3. Measurement of thermal diffusivity of depleted uranium metal microspheres

    Science.gov (United States)

    Humrickhouse-Helmreich, Carissa J.; Corbin, Rob; McDeavitt, Sean M.

    2014-03-01

    The high void space of nuclear fuels composed of homogeneous uranium metal microspheres may allow them to achieve ultra-high burnup by accommodating fuel swelling and reducing fuel/cladding interactions; however, the relatively low thermal conductivity of microsphere nuclear fuels may limit their application. To support the development of microsphere nuclear fuels, an apparatus was designed in a glovebox and used to measure the apparent thermal diffusivity of a packed bed of depleted uranium (DU) microspheres with argon fill in the void spaces. The developed Crucible Heater Test Assembly (CHTA) recorded radial temperature changes due to an initial heat pulse from a central thin-diameter cartridge heater. Using thermocouple positions and time-temperature data, the apparent thermal diffusivity was calculated. The thermal conductivity of the DU microspheres was calculated based on the thermal diffusivity from the CHTA, known material densities and specific heat capacities, and an assumed 70% packing density based on prior measurements. Results indicate that DU metal microspheres have very low thermal conductivity, relative to solid uranium metal, and rapidly form an oxidation layer even in a low oxygen environment. At 500 °C, the thermal conductivity of the DU metal microsphere bed was 0.431 ± 0.0560 W/m-K compared to the literature value of approximately 32 W/m-K for solid uranium metal.

  4. Measurement of thermal diffusivity of depleted uranium metal microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Humrickhouse-Helmreich, Carissa J., E-mail: carissahelmreich@tamu.edu [Texas A and M University, Department of Nuclear Engineering, 337 Zachry Engineering Center, 3133 TAMU, College Station, TX 77843 (United States); Corbin, Rob, E-mail: rcorbin@terrapower.com [TerraPower, LLC, 330 120th Ave NE, Suite 100, Bellevue, WA 98005 (United States); McDeavitt, Sean M., E-mail: mcdeavitt@tamu.edu [Texas A and M University, Department of Nuclear Engineering, 337 Zachry Engineering Center, 3133 TAMU, College Station, TX 77843 (United States)

    2014-03-15

    The high void space of nuclear fuels composed of homogeneous uranium metal microspheres may allow them to achieve ultra-high burnup by accommodating fuel swelling and reducing fuel/cladding interactions; however, the relatively low thermal conductivity of microsphere nuclear fuels may limit their application. To support the development of microsphere nuclear fuels, an apparatus was designed in a glovebox and used to measure the apparent thermal diffusivity of a packed bed of depleted uranium (DU) microspheres with argon fill in the void spaces. The developed Crucible Heater Test Assembly (CHTA) recorded radial temperature changes due to an initial heat pulse from a central thin-diameter cartridge heater. Using thermocouple positions and time–temperature data, the apparent thermal diffusivity was calculated. The thermal conductivity of the DU microspheres was calculated based on the thermal diffusivity from the CHTA, known material densities and specific heat capacities, and an assumed 70% packing density based on prior measurements. Results indicate that DU metal microspheres have very low thermal conductivity, relative to solid uranium metal, and rapidly form an oxidation layer even in a low oxygen environment. At 500 °C, the thermal conductivity of the DU metal microsphere bed was 0.431 ± 0.0560 W/m-K compared to the literature value of approximately 32 W/m-K for solid uranium metal.

  5. Measurement of thermal diffusivity of depleted uranium metal microspheres

    International Nuclear Information System (INIS)

    Humrickhouse-Helmreich, Carissa J.; Corbin, Rob; McDeavitt, Sean M.

    2014-01-01

    The high void space of nuclear fuels composed of homogeneous uranium metal microspheres may allow them to achieve ultra-high burnup by accommodating fuel swelling and reducing fuel/cladding interactions; however, the relatively low thermal conductivity of microsphere nuclear fuels may limit their application. To support the development of microsphere nuclear fuels, an apparatus was designed in a glovebox and used to measure the apparent thermal diffusivity of a packed bed of depleted uranium (DU) microspheres with argon fill in the void spaces. The developed Crucible Heater Test Assembly (CHTA) recorded radial temperature changes due to an initial heat pulse from a central thin-diameter cartridge heater. Using thermocouple positions and time–temperature data, the apparent thermal diffusivity was calculated. The thermal conductivity of the DU microspheres was calculated based on the thermal diffusivity from the CHTA, known material densities and specific heat capacities, and an assumed 70% packing density based on prior measurements. Results indicate that DU metal microspheres have very low thermal conductivity, relative to solid uranium metal, and rapidly form an oxidation layer even in a low oxygen environment. At 500 °C, the thermal conductivity of the DU metal microsphere bed was 0.431 ± 0.0560 W/m-K compared to the literature value of approximately 32 W/m-K for solid uranium metal

  6. A review on target drug delivery: magnetic microspheres

    Directory of Open Access Journals (Sweden)

    Amit Chandna

    2013-01-01

    Magnetic microsphere is newer approach in pharmaceutical field. Magnetic microspheres as an alternative to traditional radiation methods which use highly penetrating radiation that is absorbed throughout the body. Its use is limited by toxicity and side effects. The aim of the specific targeting is to enhance the efficiency of drug delivery & at the same time to reduce the toxicity & side effects. This kind of delivery system is very much important which localises the drug to the disease site. In this larger amount of freely circulating drug can be replaced by smaller amount of magnetically targeted drug. Magnetic carriers receive magnetic responses to a magnetic field from incorporated materials that are used for magnetic microspheres are chitosan, dextran etc. magnetic microspheres can be prepared from a variety of carrier material. One of the most utilized is serum albumin from human or other appropriate species. Drug release from albumin microspheres can be sustained or controlled by various stabilization procedures generally involving heat or chemical cross-linking of the protein carrier matrix.

  7. Preparation of microspheres for slow release drug by radiation-induced suspension polymerization and their properties

    International Nuclear Information System (INIS)

    Yoshida, Masaru; Asano, Masaharu; Kaetsu, Isao

    1982-01-01

    The polymer microspheres containing drugs as drug delivery system were made by means of suspension-polymerization by radiation at low temperature by using glass-forming monomers which have stable supercooling properties and large polymerizability at low temperature. The particle distribution depended on the kind of monomer. It was found that the entrapping yield of drug in polymer microspheres increased with increasing viscosity of monomer and that the maximum value on the particle size distribution curve was also shifted to large particle diameter side. In the case of trimethylolpropane trimethacrylate monomer (43 cps), TMPT, the entrapping yield of drug reached 74% and the maximum value in particle size distribution curve appeared in the neighborhood of 105 to 210 mu m ranges. On the other hand, those values in neopentyl glycol dimethacrylate monomer (4 cps) were 12% in former and 44 -- 105 mu m in the latter. The release phenomenon of drugs from polymer microspheres was investigated. for example, the cumulative amount of mitomycin C (water soluble drug) released from TMPT polymer microsphere was about 90% after 30-day dissolution, while in the case of water-insoluble drug such as testosterone the amount of release was about 49% after 40-day dissolution. In all cases, the release rate is constant during the experimental period. Therefore, it was concluded that the release of drugs from polymer microspheres obtained in this study is possible over the long periods. (author)

  8. Silicon microspheres for near-IR communication applications

    International Nuclear Information System (INIS)

    Serpengüzel, Ali; Demir, Abdullah

    2008-01-01

    We have performed transverse electric and transverse magnetic polarized elastic light scattering calculations at 90° and 0° in the o-band at 1.3 µm for a 15 µm radius silicon microsphere with a refractive index of 3.5. The quality factors are on the order of 10 7 and the mode/channel spacing is 7 nm, which correlate well with the refractive index and the optical size of the microsphere. The 90° elastic light scattering can be used to monitor a dropped channel (drop port), whereas the 0° elastic scattering can be used to monitor the transmission channel (through port). The optical resonances of the silicon microspheres provide the necessary narrow linewidths that are needed for high-resolution optical communication applications. Potential telecommunication applications include filters, modulators, switches, wavelength converters, detectors, amplifiers and light sources. Silicon microspheres show promise as potential building blocks for silicon-based electrophotonic integration

  9. Uptake of long-acting reversible contraceptive devices in Western ...

    African Journals Online (AJOL)

    2015-07-01

    Jul 1, 2015 ... The use of long acting reversible methods (LARC) is proposed as a strategy to ... The chance of pregnancy over a year of use is significant- ly lower than ... Therefore, LARC is associated with sustained long-term potential to ...

  10. Gabapentin adjunctive to risperidone or olanzapine in partially responsive schizophrenia: an open-label pilot study

    Directory of Open Access Journals (Sweden)

    Adel Gabriel

    2010-10-01

    Full Text Available Adel GabrielDepartments of Psychiatry and Community Health Sciences, University of Calgary, Alberta, CanadaBackground: There is a great need in the treatment of schizophrenia for a drug, or drug ­combinations, to improve clinical response with fewer serious side effects. The objective of this study was to explore the therapeutic effects and tolerability of the anticonvulsant gabapentin as an adjunctive in the treatment of patients with partially responsive schizophrenia.Methods: Ten consenting patients with a confirmed Diagnostic and Statistical Manual of Mental Disorders, 4th Edition, Text Revision diagnosis of schizophrenia were identified. All patients failed at least one 12-week treatment trial with risperidone or olanzapine. Gabapentin was added to ongoing antipsychotic treatment with olanzapine or risperidone for eight weeks. The primary outcome measure was the Positive and Negative Syndrome Scale (PANSS. Other scales included the Calgary Depression Scale (CDSS and the Abnormal Involuntary Movement Scale (AIMS. Repeated-measures multivariate analysis of variance was utilized to examine changes in outcome measures over time with adjunctive treatment with gabapentin.Results: There was a significant drop in the PANSS and CDSS scores at endpoint (week 8. There were no significant differences between the two treatment groups with regard to changes in all outcome measures or in AIMS score. The adjunctive treatments were well tolerated and side effects were transient.Conclusion: Gabapentin could be used successfully as an adjunct to novel antipsychotics in partially responsive schizophrenia. However, large controlled studies are needed to examine the effectiveness of gabapentin in psychotic disorders.Keywords: schizophrenia, refractory, adjunctive treatment, gabapentin, risperidone, olanzapine

  11. Self-templated Synthesis of Nickel Silicate Hydroxide/Reduced Graphene Oxide Composite Hollow Microspheres as Highly Stable Supercapacitor Electrode Material.

    Science.gov (United States)

    Zhang, Yanhua; Zhou, Wenjie; Yu, Hong; Feng, Tong; Pu, Yong; Liu, Hongdong; Xiao, Wei; Tian, Liangliang

    2017-12-01

    Nickel silicate hydroxide/reduced graphene oxide (Ni 3 Si 2 O 5 (OH) 4 /RGO) composite hollow microspheres were one-pot hydrothermally synthesized by employing graphene oxide (GO)-wrapped SiO 2 microspheres as the template and silicon source, which were prepared through sonication-assisted interfacial self-assembly of tiny GO sheets on positively charged SiO 2 substrate microspheres. The composition, morphology, structure, and phase of Ni 3 Si 2 O 5 (OH) 4 /RGO microspheres as well as their electrochemical properties were carefully studied. It was found that Ni 3 Si 2 O 5 (OH) 4 /RGO microspheres featured distinct hierarchical porous morphology with hollow architecture and a large specific surface area as high as 67.6 m 2  g -1 . When utilized as a supercapacitor electrode material, Ni 3 Si 2 O 5 (OH) 4 /RGO hollow microspheres released a maximum specific capacitance of 178.9 F g -1 at the current density of 1 A g -1 , which was much higher than that of the contrastive bare Ni 3 Si 2 O 5 (OH) 4 hollow microspheres and bare RGO material developed in this work, displaying enhanced supercapacitive behavior. Impressively, the Ni 3 Si 2 O 5 (OH) 4 /RGO microsphere electrode exhibited outstanding rate capability and long-term cycling stability and durability with 97.6% retention of the initial capacitance after continuous charging/discharging for up to 5000 cycles at the current density of 6 A g -1 , which is superior or comparable to that of most of other reported nickel-based electrode materials, hence showing promising application potential in the energy storage area.

  12. Beat frequency ultrasonic microsphere contrast agent detection system

    Science.gov (United States)

    Pretlow, III, Robert A. (Inventor); Yost, William T. (Inventor); Cantrell, Jr., John H. (Inventor)

    1997-01-01

    A system for and method of detecting and measuring concentrations of an ultrasonically-reflective microsphere contrast agent involving detecting non-linear sum and difference beat frequencies produced by the microspheres when two impinging signals with non-identical frequencies are combined by mixing. These beat frequencies can be used for a variety of applications such as detecting the presence of and measuring the flow rates of biological fluids and industrial liquids, including determining the concentration level of microspheres in the myocardium.

  13. Microwave Irradiation Assisted Preparation of Chitosan Composite Microsphere for Dye Adsorption

    Directory of Open Access Journals (Sweden)

    Xiaoyu Chen

    2017-01-01

    Full Text Available Chitosan-activated carbon composite microspheres were prepared by emulsion cross-linking method and its adsorption properties for methyl orange were studied. Chitosan solution was mixed with activated carbon powder and then chitosan was cross-linked by epichlorohydrin under microwave irradiation. SEM photos show that the composite microspheres have diameters of 200–400 μm and activated carbon powder dispersed on the surface of composite microsphere. FTIR spectrum indicates chitosan is successfully cross-linked. Microwave irradiation can effectively shorten the cross-linking time. Composite microspheres have enhanced dye adsorption capacity for methyl orange compared to chitosan microspheres. Kinetic studies showed that the adsorption followed a pseudo-second-order model. Isotherm studies show that the isotherm adsorption equilibrium is better described by Freundlich isotherm. Regeneration results show that adsorption capacity of composite microsphere decreased about 5.51% after being reused for three times. These results indicated that chitosan-activated carbon composite microsphere has potential application in the removal of dye from wastewaters.

  14. Handwriting Movement Analyses for Monitoring Drug-Induced Motor Side Effects in Schizophrenia Patients Treated with Risperidone

    Science.gov (United States)

    Caligiuri, Michael P.; Teulings, Hans-Leo; Dean, Charles E.; Niculescu, Alexander B.; Lohr, James

    2009-01-01

    Epidemiologic studies indicate that nearly 60% of schizophrenia (SZ) patients treated with conventional antipsychotic drugs develop extrapyramidal side effects (EPS) such as parkinsonism and tardive dyskinesia. Although the prevalence of EPS has decreased due to the newer antipsychotics, EPS continue to limit the effectiveness of these medicines. Ongoing monitoring of EPS is likely to improve treatment outcome or compliance and reduce the frequency of re-hospitalization. A quantitative analysis of handwriting kinematics was used to evaluate effects of antipsychotic medication type and dose in schizophrenia patients. Twenty-seven schizophrenia patients treated with risperidone, six schizophrenia patients who received no antipsychotic medication and 46 healthy comparison participants were enrolled. Participants performed a 20-minute handwriting task consisting of loops of various sizes and a sentence. Data were captured and analyzed using MovAlyzeR software. Results indicated that risperidone-treated participants exhibited significantly more dysfluent handwriting movements than either healthy or untreated SZ participants. Risperidone-treated participants exhibited lower movement velocities during production of simple loops compared to unmedicated patients. Handwriting dysfluency during sentence writing increased with dose. A 3-factor model consisting of kinematic variables derived from sentence writing accounted for 83% (r = .91) of the variability in medication dose. In contrast, we found no association between observer-based EPS severity ratings and medication dose. These findings support the importance of handwriting-based measures to monitor EPS in medicated schizophrenia patients. PMID:19692133

  15. Synthesis and characterization of Supeparamagnetics Microspheres (PMMA via suspension polymerization

    Directory of Open Access Journals (Sweden)

    Paulo Emilio Feuser

    2014-02-01

    Full Text Available Magnetics nanoparticles (NPMs has found many applications in biomedical and technological areas. The objective of this work is the preparation and characterization of PMMA microspheres containing NPMs coated with oleic acid (NPMs-AO. For the preparation of MNPs-AO was used the coprecipitation method in an aqueous medium. For the preparation of the superparamagnetic microspheres used in suspension polymerization technique. The microspheres showed a size distribution particles of approximately 150um and a spherical morphology. From the analysis of gel permeation chromatography (GPC determined the number average molecular weight (Mw of the magnetics microspheres and there was a variation in the Mw depending on the concentration of MNPs-AO in this reaction. To analyze the magnetic properties used the vibrating sample magnetometer (MAV. The microspheres showed superparamagnetic properties and a value of saturation magnetization (Ms of about 8 emu/g MNPs. Therefore you can conclude that it is possible to obtain superparamagnetics microspheres for a particular application, either, biomedical or technological.

  16. Divergent long-term consequences of chronic treatment with haloperidol, risperidone, and bromocriptine on traumatic brain injury-induced cognitive deficits.

    Science.gov (United States)

    Phelps, Thomas I; Bondi, Corina O; Ahmed, Rashid H; Olugbade, Yewande T; Kline, Anthony E

    2015-04-15

    Antipsychotic drugs (APDs) are provided in the clinic to manage traumatic brain injury (TBI)-induced agitation and aggression. Experimental TBI studies consistently show that daily administration of the APDs, haloperidol (HAL) and risperidone (RISP), hinder recovery. However, it is unknown how long the adverse effects remain after cessation of treatment. To elucidate this clinically relevant issue, anesthetized male rats were randomly assigned to four TBI (controlled cortical impact) and four sham groups administered HAL (0.5 mg/kg), RISP (0.45 mg/kg), bromocriptine (BRO; 5.0 mg/kg, included as a control for D2 receptor action), or vehicle (VEH; 1 mL/kg) 24 h after surgery and once-daily for 19 days. Motor and cognitive recovery was assessed on days 1-5 and 14-19, respectively, and again at 1 and 3 months after drug withdrawal. No overall group differences were observed for motor function among the TBI groups, although the HAL group showed a greater beam-walk deficit on day 5 versus the VEH and BRO groups. Cognitive recovery was significantly impaired in the HAL and RISP groups during the treatment phase versus VEH and BRO. Further, BRO was superior to VEH (p=0.0042). At 1 month, both groups that received APDs continued to exhibit significant cognitive impairment versus VEH and BRO; at 3 months, only the HAL group was impaired. Moreover, the HAL, RISP, and VEH groups continued to be cognitively deficient versus BRO, which also reduced cortical damage. These data replicate previous reports that HAL and RISP impede cognitive recovery after TBI and expand the literature by revealing that the deleterious effects persist for 3 months after drug discontinuation. BRO conferred cognitive benefits when administered concomitantly with behavioral testing, thus replicating previous findings, and also after cessation demonstrating enduring efficacy.

  17. Risperidone, quetiapine, and olanzapine adjunctive treatments in major depression with psychotic features: a comparative study

    Directory of Open Access Journals (Sweden)

    Gabriel A

    2013-04-01

    Full Text Available A Gabriel Departments of Psychiatry and Community Health Sciences, University of Calgary, Calgary, AB, Canada Objectives: The purpose of this study was to compare the effectiveness of novel antipsychotics in the treatment of psychotic depression. Method: Consecutive patients who were admitted (n = 51 with a confirmed diagnosis of major depression with psychotic features (delusions or hallucinations or both participated in this open-label, naturalistic study. All patients were treated with selective serotonin reuptake inhibitors (SSRIs and serotonin–norepinephrine reuptake inhibitors (SNRIs (citalopram or venlafaxine extended release [XR], and atypical antipsychotic agents were added, as tolerated, during the first week of initiating the citalopram or venlafaxine. There were patients (n = 16 who received risperidone, who received quetiapine (n = 20, and who received olanzapine (n = 15, as an adjunctive treatment to either citalopram or venlafaxine for at least 8 weeks. Outcome measures included the Clinical Global Impression-Severity subscale (CGI-S, as the primary outcome measure, as well as the Hamilton Rating Scale for Depression-21 item (HAM-D21 and the Brief Psychiatric Rating Scale (BPRS. Tolerance to treatments and weight changes were monitored over the period of the trial. Results: All patients completed the trial with no drop outs. At 8 weeks, there was a statistically significant (P 0.01 in the olanzapine group. Conclusion: Quetiapine, risperidone, and olanzapine, given as adjunctive treatment with SSRIS or SNRIs can significantly and equally improve depressive and psychotic symptoms, in the short-term treatment of major depression with psychotic features. The author recommends that large controlled trials be conducted to examine the differences in long-term efficacy and tolerance between the atypical antipsychotic agents, in the treatment of major depression with or without psychotic features. Keywords: depression, novels

  18. Mobilization of microspheres from a fractured soil during intermittent infiltration events

    Science.gov (United States)

    Mohanty, Sanjay; Bulicek, Mark; Metge, David W.; Harvey, Ronald W.; Ryan, Joseph N.; Boehm, Alexandria B.

    2015-01-01

    Pathogens or biocolloids mobilized in the vadose zone may consequently contaminate groundwater. We found that microspheres were mobilized from a fractured soil during intermittent rainfall and the mobilization was greater when the microsphere size was larger and when the soil had greater water permeability.The vadose zone filters pathogenic microbes from infiltrating water and consequently protects the groundwater from possible contamination. In some cases, however, the deposited microbes may be mobilized during rainfall and migrate into the groundwater. We examined the mobilization of microspheres, surrogates for microbes, in an intact core of a fractured soil by intermittent simulated rainfall. Fluorescent polystyrene microspheres of two sizes (0.5 and 1.8 mm) and Br− were first applied to the core to deposit the microspheres, and then the core was subjected to three intermittent infiltration events to mobilize the deposited microspheres. Collecting effluent samples through a 19-port sampler at the base of the core, we found that water flowed through only five ports, and the flow rates varied among the ports by a factor of 12. These results suggest that flow paths leading to the ports had different permeabilities, partly due to macropores. Although 40 to 69% of injected microspheres were retained in the core during their application, 12 to 30% of the retained microspheres were mobilized during three intermittent infiltration events. The extent of microsphere mobilization was greater in flow paths with greater permeability, which indicates that macropores could enhance colloid mobilization during intermittent infiltration events. In all ports, the 1.8-mm microspheres were mobilized to a greater extent than the 0.5-mm microspheres, suggesting that larger colloids are more likely to mobilize. These results are useful in assessing the potential of pathogen mobilization and colloid-facilitated transport of contaminants in the subsurface under natural infiltration

  19. Progress in Preparation of Monodisperse Polymer Microspheres

    Science.gov (United States)

    Zhang, Hongyan

    2017-12-01

    The monodisperse crosslinked polymer microspheres have attracted much attention because of their superior thermal and solvent resistance, mechanical strength, surface activity and adsorption properties. They are of wide prospects for using in many fields such as biomedicine, electronic science, information technology, analytical chemistry, standard measurement and environment protection etc. Functional polymer microspheres prepared by different methods have the outstanding surface property, quantum size effect and good potential future in applications with its designable structure, controlled size and large ratio of surface to volume. Scholars of all over the world have focused on this hot topic. The preparation method and research progress in functional polymer microspheres are addressed in the paper.

  20. Reducing Prescriptions of Long-acting Benzodiazepine Drugs in Denmark

    DEFF Research Database (Denmark)

    Eriksen, Sophie Isabel; Bjerrum, Lars

    2015-01-01

    Prolonged consumption of benzodiazepine drugs (BZD) and benzodiazepine receptor agonists (zolpidem, zaleplon, zopiclone; altogether Z drugs) is related to potential physiological and psychological dependence along with other adverse effects. This study aimed to analyse the prescribing of long...... to the prescription. The observed reduction in BZD use was correlated to the introduction of new national guidelines on prescription of addictive drugs, but this study was not designed to detect a causal relationship. The prescribing of long-acting BZD decreased considerably more than the prescribing of short......-acting BZD (half-life >10 hr), compared to short-acting BZD in Denmark during a 10-year period. Descriptive analysis of total sales data from the Danish Register of Medicinal Product Statistics, to individuals in the primary healthcare sector, of all BZD and Z-drugs in the period of 2003-2013. Prescription...

  1. Facile synthesis of biphasic calcium phosphate microspheres with engineered surface topography for controlled delivery of drugs and proteins.

    Science.gov (United States)

    Zarkesh, Ibrahim; Ghanian, Mohammad Hossein; Azami, Mahmoud; Bagheri, Fatemeh; Baharvand, Hossein; Mohammadi, Javad; Eslaminejad, Mohamadreza Baghaban

    2017-09-01

    Biphasic calcium phosphate (BCP) microspheres are of great interest due to their high stability and osteoinductive properties at specific compositions. However, the need for optimal performance at a unique composition limits their flexibility for tuning drug release by modulation of bulk properties and presents the question of engineering surface topography as an alternative. It is necessary to have a facile method to control surface topography at a defined bulk composition. Here, we have produced BCP microspheres with different surface topographies that have the capability to be used as tunable drug release systems. We synthesized calcium deficient hydroxyapatite (CDHA) microparticles by precipitating calcium and phosphate ions onto ethylenediaminetetraacetic acid (EDTA) templates. The morphology and surface topography of CDHA microparticles were controlled using process parameters, which governed nucleation and growth. These parameters included template concentration, heat rate, and stirring speed. Under low heat rate and static conditions, we could obtain spherical microparticles with long and short nanosheets on their surfaces at low and high EDTA concentrations, respectively. These nanostructured microspheres were subsequently crystallized by thermal treatment to produce EDTA-free BCP microspheres with intact morphology. These biocompatible BCP microspheres were highly effective in loading and prolonged release of both small molecule [dexamethasone (Dex)] and protein [bovine serum albumin (BSA)] models. This strategy has enabled us to control the surface topography of BCP microspheres at defined compositions and holds tremendous promise for drug delivery and tissue engineering applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Controlled release profiles of dipyridamole from biodegradable microspheres on the base of poly(3-hydroxybutyrate.

    Directory of Open Access Journals (Sweden)

    2007-12-01

    Full Text Available Novel biodegradable microspheres on the base of poly(3-hydroxybutyrate (PHB designed for controlled release of antithrombotic drug, namely dipyridamole (DPD, have been kinetically studied. The profiles of release from the microspheres with different diameters 4, 9, 63, and 92 µm present the progression of nonlinear and linear stages. Diffusionkinetic equation describing both linear (PHB hydrolysis and nonlinear (diffusion stages of the DPD release profiles from the spherical subjects has been written down as the sum of two terms: desorption from the homogeneous sphere in accordance with diffusion mechanism and the zero-order release. In contrast to the diffusivity dependence on microsphere size, the constant characteristics (k of linearity are scarcely affected by the diameter of PHB microparticles. The view of the kinetic profiles as well as the low rate of DPD release are in satisfactory agreement with kinetics of weight loss measured in vitro for the PHB films. Taking into account kinetic results, we suppose that the degradation of both films and PHB microspheres is responsible for the linear stage of DPD release profiles. In the nearest future, combination of biodegradable PHB and DPD as a representative of proliferation cell inhibitors will give possibility to elaborate the novel injectable therapeutic system for a local, long-term, antiproliferative action.

  3. Assessment of strategies for switching patients from olanzapine to risperidone: A randomized, open-label, rater-blinded study

    Directory of Open Access Journals (Sweden)

    Berry Sally A

    2008-06-01

    Full Text Available Abstract Background In clinical practice, physicians often need to change the antipsychotic medications they give to patients because of an inadequate response or the presence of unacceptable or unsafe side effects. However, there is a lack of consensus in the field as to the optimal switching strategy for antipsychotics, especially with regards to the speed at which the dose of the previous antipsychotic should be reduced. This paper assesses the short-term results of strategies for the discontinuation of olanzapine when initiating risperidone. Methods In a 6-week, randomized, open-label, rater-blinded study, patients with schizophrenia or schizoaffective disorder, on a stable drug dose for more than 30 days at entry, who were intolerant of or exhibiting a suboptimal symptom response to more than 30 days of olanzapine treatment, were randomly assigned to the following switch strategies (common risperidone initiation scheme; varying olanzapine discontinuation: (i abrupt strategy, where olanzapine was discontinued at risperidone initiation; (ii gradual 1 strategy, where olanzapine was given at 50% entry dose for 1 week after risperidone initiation and then discontinued; or (iii gradual 2 strategy, where olanzapine was given at 100% entry dose for 1 week, then at 50% in the second week, and then discontinued. Results The study enrolled 123 patients on stable doses of olanzapine. Their mean age was 40.3 years and mean (± standard deviation (SD baseline Positive and Negative Syndrome Scale (PANSS total score of 75.6 ± 11.5. All-cause treatment discontinuation was lowest (12% in the group with the slowest olanzapine dose reduction (gradual 2 and occurred at half the discontinuation rate in the other two groups (25% in abrupt and 28% in gradual 1. The relative risk of early discontinuation was 0.77 (confidence interval 0.61–0.99 for the slowest dose reduction compared with the other two strategies. After the medication was changed, improvements at

  4. Microsphere formation in droplets using antisolvent vapour precipitation technique

    OpenAIRE

    Chew, Sean Jun Liang

    2017-01-01

    In previous studies, the antisolvent vapour precipitation method has been proven to produce uniformly sized lactose microspheres (1.0 µm) from a single droplet (1.2 mm diameter) at atmospheric pressure. These types of particles have potential applications in the pharmaceutical industry, especially due to their high dissolution rate. This project looked into the possibility of using antisolvent vapour precipitation to produce microspheres from finely atomised droplets. Microspheres in the sub-...

  5. Solvent/Non-Solvent Sintering To Make Microsphere Scaffolds

    Science.gov (United States)

    Laurencin, Cato T.; Brown, Justin L.; Nair, Lakshmi

    2011-01-01

    A solvent/non-solvent sintering technique has been devised for joining polymeric microspheres to make porous matrices for use as drug-delivery devices or scaffolds that could be seeded with cells for growing tissues. Unlike traditional sintering at elevated temperature and pressure, this technique is practiced at room temperature and pressure and, therefore, does not cause thermal degradation of any drug, protein, or other biochemical with which the microspheres might be loaded to impart properties desired in a specific application. Also, properties of scaffolds made by this technique are more reproducible than are properties of comparable scaffolds made by traditional sintering. The technique involves the use of two miscible organic liquids: one that is and one that is not a solvent for the affected polymer. The polymeric microspheres are placed in a mold having the size and shape of the desired scaffold, then the solvent/non-solvent mixture is poured into the mold to fill the void volume between the microspheres, then the liquid mixture is allowed to evaporate. Some of the properties of the resulting scaffold can be tailored through choice of the proportions of the liquids and the diameter of the microspheres.

  6. Simulation Model of Microsphere Distribution for Selective Internal Radiation Therapy Agrees With Observations

    Energy Technology Data Exchange (ETDEWEB)

    Högberg, Jonas, E-mail: jonas.hogberg@radfys.gu.se [Department of Radiation Physics, Sahlgrenska Academy, University of Gothenburg, Gothenburg (Sweden); Rizell, Magnus [Department of Surgery, Sahlgrenska University Hospital, Gothenburg (Sweden); Hultborn, Ragnar; Svensson, Johanna [Department of Oncology, Sahlgrenska University Hospital, Gothenburg (Sweden); Henrikson, Olof [Department of Radiology, Sahlgrenska University Hospital, Gothenburg (Sweden); Mölne, Johan [Department of Pathology, Sahlgrenska University Hospital, Gothenburg (Sweden); Gjertsson, Peter [Department of Clinical Physiology, Sahlgrenska University Hospital, Gothenburg (Sweden); Bernhardt, Peter [Department of Radiation Physics, Sahlgrenska Academy, University of Gothenburg, Gothenburg (Sweden); Department of Medical Physics and Biomedical Engineering, Sahlgrenska University Hospital, Gothenburg (Sweden)

    2016-10-01

    Purpose: To perform a detailed analysis of microsphere distribution in biopsy material from a patient treated with {sup 90}Y-labeled resin spheres and characterize microsphere distribution in the hepatic artery tree, and to construct a novel dichotomous bifurcation model for microsphere deposits and evaluate its accuracy in simulating the observed microsphere deposits. Methods and Materials: Our virtual model consisted of arteries that successively branched into 2 new generations of arteries at 20 nodes. The artery diameter exponentially decreased from the lowest generation to the highest generation. Three variable parameters were optimized to obtain concordance between simulations and measure microsphere distributions: an artery coefficient of variation (ACV) for the diameter of all artery generations and the microsphere flow distribution at the nodes; a hepatic tree distribution volume (HDV) for the artery tree; and an artery diameter reduction (ADR) parameter. The model was tested against previously measured activity concentrations in 84 biopsies from the liver of 1 patient. In 16 of 84 biopsies, the microsphere distribution regarding cluster size and localization in the artery tree was determined via light microscopy of 30-μm sections (mean concentration, 14 microspheres/mg; distributions divided into 3 groups with mean microsphere concentrations of 4.6, 14, and 28 microspheres/mg). Results: Single spheres and small clusters were observed in terminal arterioles, whereas large clusters, up to 450 microspheres, were observed in larger arterioles. For 14 microspheres/mg, the optimized parameter values were ACV=0.35, HDV = 50 cm{sup 3}, and ADR=6 μm. For 4.6 microspheres/mg, ACV and ADR decreased to 0.26 and 0 μm, respectively, whereas HDV increased to 130 cm{sup 3}. The opposite trend was observed for 28 microspheres/mg: ACV = 0.49, HDV = 20 cm{sup 3}, and ADR = 8 μm. Conclusion: Simulations and measurements reveal that microsphere clusters are

  7. XPS analysis of aluminosilicate microspheres bioactivity tested in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Todea, M.; Vanea, E. [Faculty of Physics and Institute of Interdisciplinary Research on Bio-Nano-Sciences, Babes Bolyai University, Cluj-Napoca 400084 (Romania); Bran, S. [University of Medicine and Pharmacy “Iuliu Haţieganu”, Department of Cranio-Maxillofacial Surgery, 400029 Cluj-Napoca (Romania); Berce, P. [Technical University of Cluj-Napoca, Faculty of Machine Building and National Centre of Rapid Prototyping, 400641 Cluj-Napoca (Romania); Simon, S., E-mail: simons@phys.ubbcluj.ro [Faculty of Physics and Institute of Interdisciplinary Research on Bio-Nano-Sciences, Babes Bolyai University, Cluj-Napoca 400084 (Romania)

    2013-04-01

    The study aims to characterize surface properties of aluminosilicate microspheres incorporating yttrium, with potential biomedical applications. Micrometric particles of spherical shape were obtained by spray drying method. The behavior of aluminosilicate microspheres without yttrium and with yttrium was investigated under in vitro conditions, by seven days incubation in simulated body fluid (SBF). The surface elemental composition and the atomic environments on outermost layer of the microspheres, prior to and after incubation in SBF were evaluated by X-ray photoelectron spectroscopy (XPS) in order to investigate their bioactivity. The results were analyzed to underline the effect of yttrium addition on surface properties of the aluminosilicate microspheres and implicitly on the behavior of the samples in simulated body environments.

  8. Microspheres with an ultra high holmium content for brachytherapy of malignancies

    International Nuclear Information System (INIS)

    Lira, Raphael A.; Myamoto, Douglas M.; Souza, Jaime R.; Nascimento, Nanci; Azevedo, Mariangela de Burgos M. de; Osso Junior, Joao A.; Martinelli, Jose R.

    2011-01-01

    The overall objective of this work is to develop biodegradable microspheres intended for internal radiation therapy which provides an improved treatment for hepatic carcinomas. The most studied brachytherapy system employing microspheres made of holmium-biopolymer system is composed by poly(L-lactic acid) (PLLA) and holmium acetylacetonate (HoAcAc). The importance of the holmium high content in the microspheres can be interpreted as follow from a therapeutic standpoint, to achieve an effective use of microspheres loaded with HoAcAc, a high content of holmium is required to yield enough radioactivity with a relatively low amount of microspheres.The usual amounts of holmium that are incorporated in the microspheres composed by poly(L-lactic acid) and HoAcAc are 17.0 ± 0.5% (w/w) of holmium, which corresponds to a loading of about 50% of HoAcAc. Different approaches have been investigated to increase that value. One updated approach towards this direction is the production of microspheres with ultrahigh holmium as matrix using HoAcAc crystals as the sole starting material without the use of biopolymer. Likewise, in the search of microspheres with increased holmium content , it has been demonstrated that by changing the HoAcAc crystal structure by its recrystallization from crystal phase to the amorphous there is lost of acetylacetonate and water molecules causing the increasing of the holmium content. Microspheres were prepared by solvent evaporation, using holmium acetylacetonate (HoAcAc) crystals as the sole ingredient. Microspheres were characterized by using light and scanning electron microscopy, infrared and Raman spectroscopy, differential scanning calorimetry, X-rays diffraction, and confocal laser scanning microscopy. (author)

  9. Microspheres with an ultra high holmium content for brachytherapy of malignancies

    Energy Technology Data Exchange (ETDEWEB)

    Lira, Raphael A.; Myamoto, Douglas M.; Souza, Jaime R.; Nascimento, Nanci; Azevedo, Mariangela de Burgos M. de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Biotecnologia; Osso Junior, Joao A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Radiofarmacia; Martinelli, Jose R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil). Centro de Ciencias e Tecnologia de Materiais

    2011-07-01

    The overall objective of this work is to develop biodegradable microspheres intended for internal radiation therapy which provides an improved treatment for hepatic carcinomas. The most studied brachytherapy system employing microspheres made of holmium-biopolymer system is composed by poly(L-lactic acid) (PLLA) and holmium acetylacetonate (HoAcAc). The importance of the holmium high content in the microspheres can be interpreted as follow from a therapeutic standpoint, to achieve an effective use of microspheres loaded with HoAcAc, a high content of holmium is required to yield enough radioactivity with a relatively low amount of microspheres.The usual amounts of holmium that are incorporated in the microspheres composed by poly(L-lactic acid) and HoAcAc are 17.0 {+-} 0.5% (w/w) of holmium, which corresponds to a loading of about 50% of HoAcAc. Different approaches have been investigated to increase that value. One updated approach towards this direction is the production of microspheres with ultrahigh holmium as matrix using HoAcAc crystals as the sole starting material without the use of biopolymer. Likewise, in the search of microspheres with increased holmium content , it has been demonstrated that by changing the HoAcAc crystal structure by its recrystallization from crystal phase to the amorphous there is lost of acetylacetonate and water molecules causing the increasing of the holmium content. Microspheres were prepared by solvent evaporation, using holmium acetylacetonate (HoAcAc) crystals as the sole ingredient. Microspheres were characterized by using light and scanning electron microscopy, infrared and Raman spectroscopy, differential scanning calorimetry, X-rays diffraction, and confocal laser scanning microscopy. (author)

  10. Preparation and Comparative Bioavailability Studies of Indomethacin-Loaded Cetyl Alcohol Microspheres

    Directory of Open Access Journals (Sweden)

    N. Vishal Gupta

    2013-01-01

    Full Text Available The purpose of the present study was to compare the in vitro release and to find out whether the bioavailability of a 75 mg indomethacin capsule (Microcid SR was equivalent to optimized formulation (indomethacin-loaded cetyl alcohol microspheres. Indomethacin-loaded cetyl alcohol microspheres were prepared by meltable emulsified cooling-induced technique. Surface morphology of microspheres has been evaluated using scanning electron microscopy. A single dose, randomized, complete cross over study of IM microspheres was carried out on 10 healthy male and female Albino sheep’s under fasting conditions. The plasma was separated and the concentrations of the drug were determined by HPLC-UV method. Plasma indomethacin concentrations and other pharmacokinetic parameters obtained were statistically analyzed. The SEM images revealed the spherical shape of fat microspheres, and more than 98.0% of the isolated microspheres were in the size range 12–32 μm. DSC, FTIR spectroscopy and stability studies indicated that the drug after encapsulation with fat microspheres was stable and compatible. Both formulations were found to be bioequivalent as evidenced by in vivo studies. Based on this study, it can be concluded that cetyl alcohol microspheres and Microcid SR capsule are bioequivalent in terms of the rate and extent of absorption.

  11. Application of superparamagnetic microspheres for affinity adsorption and purification of glutathione

    International Nuclear Information System (INIS)

    Wang Qiang; Guan Yueping; Yang Mingzhu

    2012-01-01

    The superparamagnetic poly-(MA–DVB) microspheres with micron size were synthesized by the modified suspension polymerization method. Adsorption of glutathione by magnetic poly-(MA–DVB) microspheres with IDA-copper was investigated. The effect of solution pH value, affinity adsorption and desorption of glutathione was studied. The results showed that the optimum pH value for glutathione adsorption was found at pH=3.5, the maximum capacity for glutathione of magnetic poly-(MA–DVB) microspheres was estimated at 42.4 mg/g by fitting the experimental data to the Langmuir equation. The adsorption equilibrium of glutathione was obtained in about 10 min and the adsorbed glutathione was desorbed from the magnetic microspheres in about 30 min using NaCl buffer solution. The magnetic microspheres could be repeatedly utilized for the affinity adsorption of glutathione. - Highlights: ► The magnetic microsphere with surface IDA–Cu groups was synthesized. ► The magnetic microspheres were applied for adsorption of GSH. ► The adsorption–desorption of glutathione was investigated. ► The maximum adsorption capacity of GSH was fitted at 42.4 mg/g.

  12. Effects of Environmental Manipulations and Treatment with Bupropion and Risperidone on Choice between Methamphetamine and Food in Rhesus Monkeys.

    Science.gov (United States)

    Banks, Matthew L; Blough, Bruce E

    2015-08-01

    Preclinical and human laboratory choice procedures have been invaluable in improving our knowledge of the neurobiological mechanisms of drug reinforcement and in the drug development process for candidate medications to treat drug addiction. However, little is known about the neuropharmacological mechanisms of methamphetamine vs food choice. The aims of this study were to develop a methamphetamine vs food choice procedure and determine treatment effects with two clinically relevant compounds: the monoamine uptake inhibitor bupropion and the dopamine antagonist risperidone. Rhesus monkeys (n=6) responded under a concurrent schedule of food delivery (1-g pellets, fixed-ratio (FR) 100 schedule) and intravenous methamphetamine injections (0-0.32 mg/kg/injection, FR10 schedule) during 7-day bupropion (0.32-1.8 mg/kg/h) and risperidone (0.001-0.0056 mg/kg/h) treatment periods. For comparison, effects of removing food pellets or methamphetamine injections and FR response requirement manipulations were also examined. Under saline treatment conditions, food was preferred over no methamphetamine or small unit methamphetamine doses (0.01-0.032 mg/kg/injection). Larger methamphetamine doses resulted in greater methamphetamine preference and 0.32 mg/kg/injection methamphetamine maintained near exclusive preference. Removing food availability increased methamphetamine choice, whereas removing methamphetamine availability decreased methamphetamine choice. Methamphetamine choice was not significantly altered when the FR response requirements for food and drug were the same (FR100:FR100 or FR10:FR10). Risperidone treatment increased methamphetamine choice, whereas bupropion treatment did not alter methamphetamine choice up to doses that decreased rates of operant behavior. Overall, these negative results with bupropion and risperidone are concordant with previous human laboratory and clinical trials and support the potential validity of this preclinical methamphetamine vs food

  13. Surface modification of cyclomatrix polyphosphazene microsphere by thiol-ene chemistry and lectin recognition

    International Nuclear Information System (INIS)

    Chen, Chen; Zhu, Xue-yan; Gao, Qiao-ling; Fang, Fei; Huang, Xiao-jun

    2016-01-01

    Graphical abstract: A new synthetic route leading to polyphosphazene cyclomatrix microsphere with various functional groups has achieved via thiol-ene click modification. Herein, hexacholorocyclophosphazene (HCCP) crosslinked with bisphenol-S and 4,4′-diallyl bisphenol-S to generate broadly dispersed microspheres. Thiol-ene modification under UV irradiation not only presented high efficiency and flexibility for post-functionalization, but also imposed no harm on global morphology and crosslinked skeleton of such microspheres. - Highlights: • Functional polyphosphazene microspheres with high chemical flexibility were synthesized by thiol-ene modification. • Polyphosphazene microspheres possessed high thermal stability. • Glycosylated polyphosphazene microspheres showed affinity to lectin Con-A, which inferred potential application in biomedicine. - Abstract: A new synthetic route leading to functional polyphosphazene cyclomatrix microsphere has been developed via thiol-ene click modification. Hexacholorocyclophosphazene (HCCP) was crosslinked with both bisphenol-S and 4,4′-diallyl bisphenol-S to obtain vinyl polyphosphazene microspheres (VPZM) in order to ensure high crosslinking degree and introduce vinyl moieties. Compared to the microspheres obtained by HCCP and bisphenol-S, the size of VPZM was broadly dispersed from 400 nm to 1.40 μm. Thiol-ene click reactions were carried out to attach functional groups, such as glucosyl, carboxyl, ester and dodecyl groups onto polyphosphazene microspheres, which demonstrated no change in morphology and size after modification. Solid state NMR (SSNMR) and Fourier transform infrared spectoscopy (FT-IR) results showed that the vinyl moieties were introduced in the period of crosslinking and functionalization was also successful via click reactions. Moreover, the microspheres presented a little difference in thermal properties after modification. Concanavalin A (Con-A) fluorescent adsorption was also observed for

  14. Surface modification of cyclomatrix polyphosphazene microsphere by thiol-ene chemistry and lectin recognition

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chen; Zhu, Xue-yan; Gao, Qiao-ling; Fang, Fei; Huang, Xiao-jun, E-mail: hxjzxh@zju.edu.cn

    2016-11-30

    Graphical abstract: A new synthetic route leading to polyphosphazene cyclomatrix microsphere with various functional groups has achieved via thiol-ene click modification. Herein, hexacholorocyclophosphazene (HCCP) crosslinked with bisphenol-S and 4,4′-diallyl bisphenol-S to generate broadly dispersed microspheres. Thiol-ene modification under UV irradiation not only presented high efficiency and flexibility for post-functionalization, but also imposed no harm on global morphology and crosslinked skeleton of such microspheres. - Highlights: • Functional polyphosphazene microspheres with high chemical flexibility were synthesized by thiol-ene modification. • Polyphosphazene microspheres possessed high thermal stability. • Glycosylated polyphosphazene microspheres showed affinity to lectin Con-A, which inferred potential application in biomedicine. - Abstract: A new synthetic route leading to functional polyphosphazene cyclomatrix microsphere has been developed via thiol-ene click modification. Hexacholorocyclophosphazene (HCCP) was crosslinked with both bisphenol-S and 4,4′-diallyl bisphenol-S to obtain vinyl polyphosphazene microspheres (VPZM) in order to ensure high crosslinking degree and introduce vinyl moieties. Compared to the microspheres obtained by HCCP and bisphenol-S, the size of VPZM was broadly dispersed from 400 nm to 1.40 μm. Thiol-ene click reactions were carried out to attach functional groups, such as glucosyl, carboxyl, ester and dodecyl groups onto polyphosphazene microspheres, which demonstrated no change in morphology and size after modification. Solid state NMR (SSNMR) and Fourier transform infrared spectoscopy (FT-IR) results showed that the vinyl moieties were introduced in the period of crosslinking and functionalization was also successful via click reactions. Moreover, the microspheres presented a little difference in thermal properties after modification. Concanavalin A (Con-A) fluorescent adsorption was also observed for

  15. Development and Evaluation of Floating Microspheres of Curcumin ...

    African Journals Online (AJOL)

    Purpose: To prepare and evaluate floating microspheres of curcumin for prolonged gastric residence time and increased drug bioavailability. Methods: Floating microsphere were prepared by emulsion solvent diffusion method, using hydroxylpropyl methylcellulose (HPMC), ethyl cellulose (EC), Eudragit S 100 polymer in ...

  16. Microspheres of poly(ε-caprolactone) loaded Holmium-165: morphology and thermal degradation behavior

    International Nuclear Information System (INIS)

    Geraldes, Adriana Napoleao; Miyamoto, Douglas Massao; Lira, Raphael Arivar de; Osso Junior, Joao Alberto; Nascimento, Nanci; Azevedo, Mariangela de Burgos M. de

    2011-01-01

    Polycaprolactone (PCL), being one of the most important biocompatible and biodegradable aliphatic polyester, provides many potential biomedical. The preparation of biodegradable materials, polymer-based microspheres, is being developed by our group and the goal is to prepare and label with Ho-165 different polymer-based microspheres. The use of radionuclide-loaded microspheres is a promising treatment of liver malignancies. PCL microspheres can be loaded with holmium acetylacetonate (HoAcAc). PCL and PCL/HoAcAc microspheres were prepared by an emulsion solvent extraction/evaporation technique. The PCL/ HoAcAc microspheres were irradiated in a nuclear reactor IEA-R1 at IPEN/CNEN-SP to radionuclide activation. Gamma irradiation was performed at 25 and 50 kGy doses. The microspheres were evaluated by differential scanning calorimetry analysis (DSC), thermogravimetric analysis (TG), Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and con focal laser scanning microscopy (CLSM). In the CLSM images were observed emission in 488 nm characteristic of holmium. The SEM surface image of PCL/HoAcAc microspheres showed more roughness than PCL microspheres. TG of PCL/HoAcAc microspheres showed a substantial weight loss above 200 degree C, indicating decomposition of HoAcAc. The residual weight indicates the presence of Ho 2 O 3 . Gamma irradiation at 25 and 50 kGy doses had no effect on the PCL/HoAcAc microspheres, which indicates that the chemical composition of the microspheres had not change. (author)

  17. Microspheres of poly({epsilon}-caprolactone) loaded Holmium-165: morphology and thermal degradation behavior

    Energy Technology Data Exchange (ETDEWEB)

    Geraldes, Adriana Napoleao; Miyamoto, Douglas Massao; Lira, Raphael Arivar de; Osso Junior, Joao Alberto; Nascimento, Nanci; Azevedo, Mariangela de Burgos M. de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Polycaprolactone (PCL), being one of the most important biocompatible and biodegradable aliphatic polyester, provides many potential biomedical. The preparation of biodegradable materials, polymer-based microspheres, is being developed by our group and the goal is to prepare and label with Ho-165 different polymer-based microspheres. The use of radionuclide-loaded microspheres is a promising treatment of liver malignancies. PCL microspheres can be loaded with holmium acetylacetonate (HoAcAc). PCL and PCL/HoAcAc microspheres were prepared by an emulsion solvent extraction/evaporation technique. The PCL/ HoAcAc microspheres were irradiated in a nuclear reactor IEA-R1 at IPEN/CNEN-SP to radionuclide activation. Gamma irradiation was performed at 25 and 50 kGy doses. The microspheres were evaluated by differential scanning calorimetry analysis (DSC), thermogravimetric analysis (TG), Fourier transformed infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and con focal laser scanning microscopy (CLSM). In the CLSM images were observed emission in 488 nm characteristic of holmium. The SEM surface image of PCL/HoAcAc microspheres showed more roughness than PCL microspheres. TG of PCL/HoAcAc microspheres showed a substantial weight loss above 200 degree C, indicating decomposition of HoAcAc. The residual weight indicates the presence of Ho{sub 2}O{sub 3}. Gamma irradiation at 25 and 50 kGy doses had no effect on the PCL/HoAcAc microspheres, which indicates that the chemical composition of the microspheres had not change. (author)

  18. Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres

    Directory of Open Access Journals (Sweden)

    S. Bagheri-Khoulenjani

    2009-12-01

    Full Text Available Nano-hydroxyapatite/gelatin (nHA/Ge microspheres are currently used in bone tissue engineering as bone filler. In this  study, the effect of fabrication process parameters on the particle size of nano-hydroxyapatite/gelatinmicrospheres was investigated. The nHA/Ge microspheres were fabricated using water in oil emulsion. In order to design an experimental design, a surface response model with 2 factors including the rate of shaking and water to oil volume ratio in 3 levels was applied. Particle size was evaluated by using an optical microscope. The morphology of microspheres and distribution of nano-particles within the microspheres were studied by using scanning electron microscope and Ca elemental map obtained from energy dispersive X-ray analysis (EDX, respectively. Statistical analysis of the results obtained from particle size measurements revealed that the rate of shaking has stronger influence on the particle size of microspheres. Morphological studies showed that the fabricated microspheres were spherical with smooth surface. Ca elemental map of the microspheres showed that nano-hydroxyapatite particles distributed uniformly within the microspheres.

  19. Long acting reversible contraception | Kluge | Obstetrics and ...

    African Journals Online (AJOL)

    Long acting reversible contraception (LARC) has great potential in reducing these pregnancies as they are highly effective and do not rely a great deal on compliance and correct use. They have better continuation rates than short term hormonal contraception and as per definition require administration less than once per ...

  20. Evaluation of nonradioactive, colored microspheres for measurement of regional myocardial blood flow in dogs

    International Nuclear Information System (INIS)

    Hale, S.L.; Alker, K.J.; Kloner, R.A.

    1988-01-01

    Measurement of regional myocardial blood flow (RMBF) is crucial in experimental studies of myocardial ischemia and reperfusion in dogs. The standard measurement technique uses radioactive microspheres; however, not all institutions are able to dispose of radioactive waste and therefore cannot make use of this method. We tested a new, nonradioactive microsphere, labeled with colors instead of nuclides. Simultaneous blood flow measurements with two nuclide-labeled and two colored microspheres were performed after coronary occlusion in dogs. Both techniques show a within-method correlation of r greater than 0.98. Duplicate variability for paired RMBF values in 80 samples was 8.7 +/- 0.1% when computed with radioactive microspheres and 13.2 +/- 1.8% when computed with colored microspheres. There was a good correlation in the measurement of RMBF between the radioactive- and colored-microsphere methods (r = 0.98). The best-fitting linear regression line was expressed by the formula: Colored-microsphere RMBF = 1.11 (radioactive-microsphere RMBF)-0.02. When measured by colored microspheres, RMBF was approximately 8% higher than when computed with radioactive microspheres for blood flow values of 0-2 ml/min/g. When blood flow was increased pharmacologically to levels of 2-7.5 ml/min/g, colored microspheres yielded blood flow values 39% higher than the values computed by radioactive microspheres. We conclude that the nonradioactive, colored-microsphere method correlates with the radioactive technique, but at high flows, it yields values greater than those obtained with radioactive microspheres

  1. Inhibition by local bupivacaine-releasing microspheres of acute postoperative pain from hairy skin incision.

    Science.gov (United States)

    Ohri, Rachit; Wang, Jeffrey Chi-Fei; Blaskovich, Phillip D; Pham, Lan N; Costa, Daniel S; Nichols, Gary A; Hildebrand, William P; Scarborough, Nelson L; Herman, Clifford J; Strichartz, Gary R

    2013-09-01

    Acute postoperative pain causes physiological deficits and slows recovery. Reduction of such pain by local anesthetics that are delivered for several days postoperatively is a desirable clinical objective, which is approached by a new formulation and applied in animal studies reported here. We subcutaneously injected a new formulation of poly-lactic-co-glycolic acid polymer microspheres, which provides steady drug release for 96+ hours into rats at the dorsal region 2 hours before surgery. A single 1.2-cm-long skin incision was followed by blunt dissection of skin away from the underlying fascia, and closed by 2 sutures, followed by 14 days of testing. Microspheres containing 5, 10, 20, and 40 mg bupivacaine were injected locally 2 hours before surgery; bupivacaine-free microspheres were the vehicle control, and bupivacaine HCl solution (0.5%), the positive control. Mechanical sensitivity was determined by the frequency of local muscle contractions to repeated pokes with nylon monofilaments (von Frey hairs) exerting 4 and 15 g forces, testing, respectively, allodynia and hyperalgesia, and by pinprick. Injection of bupivacaine microspheres (40 mg drug) into intact skin reduced responses to 15 g von Frey hairs for 6 hours and to pinprick for 36 hours. Respective reductions from bupivacaine HCl lasted for 3 and 2 hours. Skin incision and dissection alone caused mechanical allodynia and hyperalgesia for 14 days. Microspheres containing 20 or 40 mg bupivacaine suppressed postoperative hypersensitivity for up to 3 days, reduced integrated allodynia (area under curve of response versus time) over postoperative days 1 to 5 by 51% ± 20% (mean ± SE) and 78% ± 12%, and reduced integrated hyperalgesia by 55% ± 13% and 64% ± 11%, for the respective doses. Five and ten milligrams bupivacaine in microspheres and the 0.5% bupivacaine solution were ineffective in reducing postoperative hypersensitivity, as were 40 mg bupivacaine microspheres injected contralateral to the

  2. Comparative study of clozapine versus risperidone in treatment-naive, first-episode schizophrenia: A pilot study

    Directory of Open Access Journals (Sweden)

    Sukhtej Sahni

    2016-01-01

    Interpretation & conclusions: The findings of this preliminary study showed clozapine as a better choice than risperidone in terms of efficacy, tolerability and better quality of life in treatment-naive, first-episode schizophrenia. However, further studies need to be done on a larger group of patients to confirm the findings.

  3. Study of the focusing effect of silica microspheres on the upconversion of Er{sup 3+}–Yb{sup 3+} codoped glass ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Pérez-Rodríguez, C., E-mail: cjperez@ull.edu.es [Dpto. Física Fundamental y Experimental, Electrónica y Sistemas, Universidad de La Laguna, Av. Astrofísico Francisco Sánchez, s/n E-38206 La Laguna, Tenerife (Spain); Imanieh, M.H. [Department of Chemical and Environmental Engineering, University of Toledo, Toledo, OH (United States); Department of Materials, Ceramic Division, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Martín, L.L [Dpto. Física Fundamental y Experimental, Electrónica y Sistemas, Universidad de La Laguna, Av. Astrofísico Francisco Sánchez, s/n E-38206 La Laguna, Tenerife (Spain); Ríos, S. [Dpto. de Física Básica, Universidad de La Laguna, Av. Astrofísico Francisco Sánchez, s/n E-38206 La Laguna, Tenerife (Spain); Martín, I.R. [Dpto. Física Fundamental y Experimental, Electrónica y Sistemas, Universidad de La Laguna, Av. Astrofísico Francisco Sánchez, s/n E-38206 La Laguna, Tenerife (Spain); MALTA Consolider Team, Av. Astrofísico Francisco Sánchez, s/n E-38206 La Laguna, Tenerife (Spain); Yekta, Bijan Eftekhari [Department of Materials, Ceramic Division, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

    2013-11-05

    Highlights: •Silica microspheres have been located on the surface of glass and glass ceramics samples codoped with Er and Yb. •Microspheres act as microlens of the 950 nm excitation light resulting in focalized excited regions in the samples with sizes under the micron. •Intense red upconversion is achieved in the focalized areas. •Microspheres collect the upconversion emission light, scoping with the together microlensing properties an enhancement of the detected signal in a 3x factor. •Performed Finite-Difference Time-Domain simulations predict the size of the focalized regions in good agreement with the experimental measurements. -- Abstract: The upconversion emission properties of Er{sup 3+}–Yb{sup 3+} codoped glass and glass ceramic samples with different Si/Al ratios and thermal treatments were analyzed by covering their surfaces with silica microspheres (3.8 μm diameter). A 950 nm laser beam is focused by the microspheres producing a set of photonic nanojets near the surface of the samples. After the upconversion processes of the Er{sup 3+} ions located in each microsphere focus area, these ions emit light in the green and red regions. The red emission from each sample was measured, yielding an upconversion intensity in the focal areas three times higher than the emission from the bare substrate. To estimate the real size of the red emission area under a single microsphere, a deconvolution of the measured focal spots with the Point Spread Function of the experimental setup was performed, resulting in a Full Width at Half Maximum of 330 nm. The results obtained by Finite-Difference Time-Domain simulations are in good agreement with the experimental values.

  4. The synthesis and photocatalytic activity of ZnSe microspheres

    International Nuclear Information System (INIS)

    Cao Huaqiang; Xiao Yujiang; Zhang Sichun

    2011-01-01

    This paper reports the synthesis of semiconductor ZnSe microspheres composed of nanoparticles via a solvothermal route between the organic molecule selenophene (C 4 H 4 Se) and ZnCl 2 without adding any surfactant. The ZnSe microspheres were characterized by x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), specific surface area measurement, and photoluminescence (PL) spectra. A strong and broad blue PL emission at 443 nm in wavelength (∼2.79 eV in photon energy) is attributed to the near-band-edge (NBE) emission of ZnSe, while the 530 nm peak is a defect-related (DL) emission. The photocatalytic activity of the as-prepared ZnSe microspheres was evaluated by photodegradation of methyl orange (MO) dye under ultraviolet (UV) light and visible light irradiation. The degradations of MO reach 94% or 95.1%, close to 100%, in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 7 or 10 h under UV irradiation, respectively. Meanwhile the degradations of MO reach 94.3% or 60.6% in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 12 h, respectively. The degradation rate of ZnSe microspheres is twice that of ZnSe commercial powder under UV light irradiation, and three times under visible light irradiation. The degradation process of MO dye on ZnSe microspheres under UV or visible light is also discussed.

  5. Comparison between risperidone, an atypical antipsychotic agent and haloperidol, a conventional agent used to treat schizophrenia

    International Nuclear Information System (INIS)

    Rehman, A.; Jawed, M.; Maheshwari, M.P.

    2012-01-01

    An observational and comparative study was conducted to compare the functional outcome between the patients treated with conventional antipsychotic agent haloperidol and typical antipsychotic agent, Risperidone (Risperidal). A total of 32 patients were included in the study with established schizophrenia according to (DSM iv). The data was processed on SSPE 10th version. The primary outcome measure was the improvement of negative symptoms of schizophrenia and secondary outcome measure was to observe the superiority of the atypical drug Risperid one over conventional agent haloperidol regarding side effects. Patients were assessed at baseline, 2nd and 8th week, using four tools of assessment. For treatment group receiving haloperidol mean was 47.2+-11.50 at 8th week and for Risperidone treatment group mean was 43+-14.68. The P values for all the parameters in the Clozapine group were significant as compared to haloperidol. (author)

  6. Risperidone Added to Psychostimulant in Children with Severe Aggression and Attention-Deficit/Hyperactivity Disorder: Lack of Effect on Attention and Short-Term Memory.

    Science.gov (United States)

    Farmer, Cristan A; Epstein, Jeffery N; Findling, Robert L; Gadow, Kenneth D; Arnold, L Eugene; Kipp, Heidi; Kolko, David J; Butter, Eric; Schneider, Jayne; Bukstein, Oscar G; McNamara, Nora K; Molina, Brooke S G; Aman, Michael G

    2017-03-01

    Professionals have periodically expressed concern that atypical antipsychotics may cause cognitive blunting in treated patients. In this study, we report data from a double-blind, randomized, controlled study of stimulant plus placebo versus combined stimulant and risperidone to evaluate the effects of the atypical antipsychotic on attention and short-term memory. A total of 165 (n = 83 combined treatment; n = 82 stimulant plus placebo) children with attention-deficit/hyperactivity disorder and severe physical aggression, aged 6-12 years, were evaluated with Conners' Continuous Performance Test (CPT-II) and the Wechsler Intelligence Scale for Children-III (WISC) Digit Span subscale at baseline, after 3 weeks of stimulant-only treatment, and after six additional weeks of randomized treatment (stimulant+placebo vs. stimulant+risperidone). At 3 weeks, improvement on CPT-II performance (Commissions and Reaction Time Standard Error; p memory performance (p attention and short-term memory associated with short-term use of risperidone. NCT00796302.

  7. Olanzapine has better efficacy compared to risperidone for treatment of negative symptoms in schizophrenia

    Directory of Open Access Journals (Sweden)

    P N Suresh Kumar

    2016-01-01

    Conclusions: Both treatments were well-tolerated and efficacious. Greater reductions in severity of the illness and negative symptoms were seen with olanzapine consistently through 1 year. The frequency and severity of extrapyramidal symptoms were negligible and similar in the two treatment groups. Weight gain, hyperlipidemia, and hyperglycemia were comparable in both groups. Risperidone produced significant hyperprolactinemia.

  8. [Preparation of citrulline microspheres by spray drying technique for colonic targeting].

    Science.gov (United States)

    Bahri, S; Zerrouk, N; Lassoued, M-A; Tsapis, N; Chaumeil, J-C; Sfar, S

    2014-03-01

    Citrulline is an amino acid that becomes essential in situations of intestinal insufficiency such as short bowel syndrome. It is therefore interesting to provide the patients with dosage forms for routing citrulline to the colon. The aim of this work is to formulate microspheres of citrulline for colonic targeting by the technique of spray drying. Eudragit(®) FS 30D was selected as polymer to encapsulate citrulline using the spray drying technique. Citrulline and Eudragit(®) FS 30D were dissolved in water and ethanol, respectively. The aqueous and the ethanolic solutions were then mixed in 1:2 (v/v) ratio. Microspheres were obtained by nebulizing the citrulline-Eudragit(®) FS 30D solution using a Mini spray dryer equipped with a 0.7mm nozzle. The microspheres have been formulated using citrulline and Eudragit(®) FS 30D. The size distribution of microspheres was determined by light diffraction. The morphology of the microspheres was studied by electron microscopy. Manufacturing yields, encapsulation rate and dissolution profiles were also studied. The microspheres obtained had a spherical shape with a smooth surface and a homogeneous size except for the microspheres containing the highest concentration of polymer (90 %). The formulation showed that the size and morphology of the microspheres are influenced by the polymer concentration. Manufacturing yields were about 51 % but encapsulation rate were always very high (above 90 %). The in vitro dissolution study showed that the use of the Eudragit(®) FS 30D under these conditions is not appropriate to change the dissolution profile of the citrulline. This technique has led to the formulation of microspheres with good physical properties in terms of morphology and size. The compression of the microspheres should help to control citrulline release for colonic targeting. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  9. A Naturalistic Comparison of Methylphenidate and Risperidone Monotherapy in Drug-Naive Youth With Attention-Deficit/Hyperactivity Disorder Comorbid With Oppositional Defiant Disorder and Aggression.

    Science.gov (United States)

    Masi, Gabriele; Manfredi, Azzurra; Nieri, Giulia; Muratori, Pietro; Pfanner, Chiara; Milone, Annarita

    2017-10-01

    Attention-deficit/hyperactivity disorder (ADHD) and oppositional defiant disorder (ODD) are frequently co-occurring in youth, but data about the pharmacological management of this comorbidity are scarce, especially when impulsive aggression is prominent. Although stimulants are the first-line medication for ADHD, second-generation antipsychotics, namely, risperidone, are frequently used. We aimed to assess effectiveness and safety of monotherapy with the stimulant methylphenidate (MPH) and risperidone in a consecutive sample of 40 drug-naive male youths diagnosed as having ADHD-combined presentation, comorbid with ODD and aggression, without psychiatric comorbidities, according to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition criteria and a structured clinical interview (Schedule for Affective Disorders and Schizophrenia for School-Age Children-Present and Lifetime Version). Twenty males treated with MPH (mean age, 8.95 ± 1.67 years) and 20 males treated with risperidone (mean age, 9.35 ± 2.72 years), followed up to 6 months, were assessed according to efficacy measures (Child Behavior Checklist [CBCL], Clinical Global Impression-Severity [CGI-S] and Improvement [CGI-I], Children Global Assessment Scale), and safety measures. At the end of the follow-up, both medications were similarly effective based on CBCL subscales of aggression and rule-breaking behaviors, on Diagnostic and Statistical Manual of Mental Disorders-oriented oppositional defiant problems and conduct problems, and on CGI-S, CGI-I, and Children Global Assessment Scale, but only MPH was effective on CBCL attention problems and attention-deficit/hyperactivity problems. Risperidone was associated with weight gain and elevated prolactin levels. Although the nonrandomized, nonblind design limits the conclusions of our exploratory study, our findings suggest that when ADHD is comorbid with ODD and aggression MPH and risperidone are both effective on aggressive behavior, but

  10. 700 F hybrid capacitors cells composed of activated carbon and Li4Ti5O12 microspheres with ultra-long cycle life

    Science.gov (United States)

    Ruan, Dianbo; Kim, Myeong-Seong; Yang, Bin; Qin, Jun; Kim, Kwang-Bum; Lee, Sang-Hyun; Liu, Qiuxiang; Tan, Lei; Qiao, Zhijun

    2017-10-01

    To address the large-scale application demands of high energy density, high power density, and long cycle lifetime, 700-F hybrid capacitor pouch cells have been prepared, comprising ∼240-μm-thick activated carbon cathodes, and ∼60-μm-thick Li4Ti5O12 anodes. Microspherical Li4Ti5O12 (M-LTO) synthesized by spray-drying features 200-400 nm primary particles and interconnected nanopore structures. M-LTO half-cells exhibits high specific capacities (175 mAhh g-1), good rate capabilities (148 mAhh g-1 at 20 C), and ultra-long cycling stabilities (90% specific capacity retention after 10,000 cycles). In addition, the obtained hybrid capacitors comprising activated carbon (AC) and M-LTO shows excellent cell performances, achieving a maximum energy density of 51.65 Wh kg-1, a maximum power density of 2466 W kg-1, and ∼92% capacitance retention after 10,000 cycles, thus meeting the demands for large-scale applications such as trolleybuses.

  11. Facile preparation of hierarchically porous polymer microspheres for superhydrophobic coating

    Science.gov (United States)

    Gao, Jiefeng; Wong, Julia Shuk-Ping; Hu, Mingjun; Li, Wan; Li, Robert. K. Y.

    2013-12-01

    A facile method, i.e., nonsolvent assisted electrospraying, is proposed to fabricate hierarchically porous microspheres. The pore size on the microsphere surface ranges from a few tens to several hundred nanometers. Thermally and nonsolvent induced phase separation as well as breath figure is responsible for the formation of the hierarchical structures with different nano-sized pores. The nonsolvent could not only induce phase separation, but also stabilize the interface between the droplet and air, which can prevent the droplet from strong deformation, and is therefore beneficial to the formation of regular and uniform microspheres. On the other hand, solvent evaporation, polymer diffusion and Coulomb fission during electrospraying influence the morphology of finally obtained products. In this paper, the influence of polymer concentration, the weight ratio between nonsolvent and polymer and the flowing rate on the morphology of the porous microsphere is carefully studied. The hierarchically porous microsphere significantly increases the surface roughness and thus the hydrophobicity, and the contact angle can reach as high as 152.2 +/- 1.2°. This nonsolvent assisted electrospraying opens a new way to fabricate superhydrophobic coating materials.A facile method, i.e., nonsolvent assisted electrospraying, is proposed to fabricate hierarchically porous microspheres. The pore size on the microsphere surface ranges from a few tens to several hundred nanometers. Thermally and nonsolvent induced phase separation as well as breath figure is responsible for the formation of the hierarchical structures with different nano-sized pores. The nonsolvent could not only induce phase separation, but also stabilize the interface between the droplet and air, which can prevent the droplet from strong deformation, and is therefore beneficial to the formation of regular and uniform microspheres. On the other hand, solvent evaporation, polymer diffusion and Coulomb fission during

  12. Magnetic propulsion of microspheres at liquid-glass interfaces

    Science.gov (United States)

    Helgesen, Geir

    2018-02-01

    Bio-coated, magnetic microspheres have many applications in biotechnology and medical technology as a tool to separate and extract cells or molecules in a water solution by applying external strong magnetic field gradients. However, magnetic microspheres with or without attached cargo can also be separated in the liquid solution if they are exposed to alternating or rotating, relatively weak magnetic fields. Microspheres that have a higher density than the liquid will approach the bottom surface of the sample cell, and then a combination of viscous and surface frictional forces can propel the magnetic microspheres along the surface in a direction perpendicular to the axis of field rotation. Experiments demonstrating this type of magnetic propulsion are shown, and the forces active in the process are discussed. The motion of particles inside sample cells that were tilted relative to the horizontal direction was studied, and the variation of propulsion velocity as a function of tilt angle was used to find the values of different viscous and mechanical parameters of motion. Propulsion speeds of up to 5 μm/s were observed and were found to be caused by a partly rolling and partly slipping motion of rotating microspheres with a slipping coefficient near 0.6.

  13. Study on Magnetic Responsibility of Rare Earth Ferrite/Polyacrylamide Magnetic Microsphere

    Institute of Scientific and Technical Information of China (English)

    Zhang Ming; Wang Zhifeng; Zhang Hong; Dai Shaojun; Qiu Guanming; Okamoto Hiroshi

    2005-01-01

    In inverse microemulsion, rare earth ferrite/polyacrylamide magnetic microsphere were prepared and their magnetic responsibility were studied by magnetic balance. Results indicate that the magnetic responsibility of microsphere relates to magnetic moment of rare earth ion, and it can be improved by the addition of dysprosium ion of high magnetic moment. Dysprosium content has an effect on magnetic responsibility of dysprosium ferrite/polyacrylamide magnetic microsphere. The microsphere displays strong magnetic responsibility when the molar ratio of Dy3+/iron is 0.20.

  14. Validation of an analytical method applicable to study of 1 mg/mL oral Risperidone solution stability

    International Nuclear Information System (INIS)

    Abreu Alvarez, Maikel; Garcia Penna, Caridad Margarita; Martinez Miranda, Lissette

    2010-01-01

    A validated analytical method by high-performance liquid chromatography (HPLC) was applicable to study of 1 mg/mL Risperidone oral solution stability. The above method was linear, accurate, specific and exact. A stability study of the 1 mg/mL Risperidone oral solution was developed determining its expiry date. The shelf life study was conducted for 24 months at room temperature; whereas the accelerated stability study was conducted with product under influence of humidity and temperature; analysis was made during 3 months. Formula fulfilled the quality specifications described in Pharmacopeia. The results of stability according to shelf life after 24 months showed that the product maintains the parameters determining its quality during this time and in accelerated studies there was not significant degradation (p> 0.05) in the product. Under mentioned conditions expiry date was of 2 years

  15. In Situ Synthesis of MnS Hollow Microspheres on Reduced Graphene Oxide Sheets as High-Capacity and Long-Life Anodes for Li- and Na-Ion Batteries.

    Science.gov (United States)

    Xu, Xijun; Ji, Shaomin; Gu, Mingzhe; Liu, Jun

    2015-09-23

    Uniform MnS hollow microspheres in situ crystallized on reduced graphene oxide (RGO) nanosheets via a facile hydrothermal method. The MnS/RGO composite material was used as the anode for Na-ion batteries for the first time and exhibited excellent cycling performance, superior specific capacity, and great cycle stability and rate capability for both Li- and Na-ion batteries. Compared with nonencapsulated pure MnS hollow microspheres, these MnS/RGO nanocomposites demonstrated excellent charge-discharge stability and long cycle life. Li-ion storage testing revealed that these MnS/RGO nanocomposites deliver high discharge-charge capacities of 640 mAh g(-1) at 1.0 A g(-1) after 400 cycles and 830 mAh g(-1) at 0.5 A g(-1) after 100 cycles. The MnS/RGO nanocomposites even retained a specific capacity of 308 mAh g(-1) at a current density of 0.1 A g(-1) after 125 cycles as the anode for Na-ion batteries. The outstanding electrochemical performance of the MnS/RGO composite attributed to the RGO nanosheets greatly improved the electronic conductivity and efficiently mitigated the stupendous volume expansion during the progress of charge and discharge.

  16. Preparation of chitosan/nano hydroxyapatite organic-inorganic hybrid microspheres for bone repair.

    Science.gov (United States)

    Chen, Jingdi; Pan, Panpan; Zhang, Yujue; Zhong, Shengnan; Zhang, Qiqing

    2015-10-01

    In this work, we encapsulated icariin (ICA) into chitosan (CS)/nano hydroxyapatite (nHAP) composite microspheres to form organic-inorganic hybrid microspheres for drug delivery carrier. The composition and morphology of composite microspheres were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and differential scanning calorimetry- thermogravimetric analysis (DSC-TGA). Moreover, we further studied the performance of swelling properties, degradation properties and drug release behavior of the microspheres. ICA, the extract of traditional Chinese medicine-epimedium, was combined to study drug release properties of the microspheres. ICA loaded microspheres take on a sustained release behavior, which can be not only ascribed to electrostatic interaction between reactive negative hydroxyl (OH) of ICA and positive amine groups (NH₂) of CS, but also depended on the homogeneous dispersion of HAP nanoparticles inside CS organic matrix. In addition, the adhesion and morphology of osteoblasts were detected by inverted fluorescence microscopy. The biocompatibility of CS/nHAP/ICA microspheres was evaluated by the MTT cytotoxicity assay, Hoechst 33258 and PI fluorescence staining. These studies demonstrate that composite microspheres provide a suitable microenvironment for osteoblast attachment and proliferation. It can be speculated that the ICA loaded CS-based organic-inorganic hybrid microspheres might have potential applications in drug delivery systems. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Investigation of control conditions of uranium dioxide pellets sinterability through microspheres

    International Nuclear Information System (INIS)

    Assis, Gino de.

    1996-01-01

    Promotion or inhibition of ceramic powders sinterability, the decisive question in ceramic processing is approached in this dissertation. Each high density microsphere has been considered as a solid inclusion in a low density microspheres matrix, generating big pores. Such pores make it difficult for the pellets density due the fact that they are difficult to be eliminated. A master mixture, allowing the pellet densification in the projected range has been reached. Batches of microspheres have been observed sometimes with high apparent density and sometimes with low apparent density. This apparent density variation was attributed to changing the oxygen partial pressure during calcination under air atmosphere. It is evident that the control of the apparent density of the microspheres needs a further research in order to adjust the sinterability of the microspheres on the desired level.It was demonstrated that the produced microspheres do not have impurities levels that can promote its sinterability or avoid their use in nuclear area

  18. Formulation and characterization of ketoprofen embedded polycaprolactone microspheres using solvent evaporation method

    Directory of Open Access Journals (Sweden)

    Pankaj Wagh

    2015-07-01

    Full Text Available The purpose of this study was to prepare polymeric microspheres containing Ketoprofen (KFN by single emulsion [oil-in-water (o/w] solvent evaporation method. Polycaprolactone (PCL, biocompatible polymer, was used for the preparation of sustained released microspheres of KFN. A Plackett–Burman design was employed by using the Design-Expert® software (Version- 9.0.3.1, Stat-Ease Inc., Minneapolis, MN. Eleven factors out of six processing factors were investigated in order to enhance the encapsulation efficiency (EE of the microspheres. The resultant microspheres were characterized for their size, morphology, EE, and drug release. Imaging of particles was performed by field emission scanning electron microscopy. Interaction between the drug and polymers were investigated by Fourier transform infrared (FTIR spectroscopy, X-ray powder diffractometry (XRPD and Differential Scanning Calorimetry (DSC. Graphical and mathematical analyses of the design showed that concentration of factor PCL (B and varying speed (F, revolution per minute, rpm were significant negative effect on the EE and identified as the significant factor determining the EE of the microspheres. The microspheres showed high % EE (31.18 % to 96.81 %. The microspheres were found to be discrete, oval with porous surface. The FTIR analysis confirmed no interaction of KFN with the polymer. The XRPD revealed the dispersion of drug within microspheres formulation. Sustained drug release profile over 12 h was achieved by PCL polymer. In conclusion, polymeric microspheres containing KFN can be successfully prepared using the technique of experimental design, and these results helped in finding the optimum formulation variables for EE of microspheres.

  19. Formulation and Evaluation of Microspheres Based on Gelatin ...

    African Journals Online (AJOL)

    Formulation and Evaluation of Microspheres Based on Gelatin-Mucin Admixtures for the Rectal Delivery of Cefuroxime Sodium. K C Ofokansi, M U Adikwu. Abstract. Purpose: Swellable microspheres based on polymers or their admixtures are frequently employed as drug delivery systems to achieve a controlled release ...

  20. Polymer-coated albumin microspheres as carriers for intravascular tumour targeting of cisplatin.

    Science.gov (United States)

    Verrijk, R; Smolders, I J; McVie, J G; Begg, A C

    1991-01-01

    We used a poly-lactide-co-glycolide polymer (PLAGA 50:50) to formulate cisplatin (cDDP) into microspheres designed for intravascular administration. Two systems were developed. PLAGA-coated albumin microspheres and microspheres consisting of PLAGA only. PLAGA-coated microspheres displayed a mean diameter of 31.8 +/- 0.9 microns and a payload of 7.5% cDDP (w/w). Solid PLAGA microspheres exhibited a mean diameter of 19.4 +/- 0.6 microns and a payload of 20% cDDP. Release characteristics and in vitro effects on L1210 leukemia and B16 melanoma cell lines were investigated. Both types of microsphere overcame the initial rapid release of cDDP (burst effect), and PLAGA-coated albumin microspheres also showed a lag phase of approximately 30 min before cDDP release began. PLAGA-coated albumin microspheres released most of their payload through diffusion, and the coating eventually cracked after 7 days' incubation in saline supplemented with 0.1% Tween at 37 degrees C, enabling the release of any cDDP remaining. Effects of platinum, pre-released from PLAGA-coated albumin microspheres on the in vitro growth of L1210 cells were comparable with those of standard formulations (dissolved) of cDDP. Material released from non-drug-loaded PLAGA microspheres had no effect on L1210 cell growth, suggesting the absence of cytotoxic compounds in the matrix. The colony-forming ability of B16 cells was also equally inhibited by standard cDDP and pre-released drug. These studies show that formulation of cDDP in PLAGA-based microspheres prevents the rapid burst effect of cDDP seen in previous preparations and offers an improved system of administration for hepatic artery infusion or adjuvant therapy, enabling better clinical handling and the promise of a higher ratio of tumour tissue to normal tissue.

  1. Ulex europaeus 1 lectin targets microspheres to mouse Peyer's patch M-cells in vivo.

    Science.gov (United States)

    Foster, N; Clark, M A; Jepson, M A; Hirst, B H

    1998-03-01

    The interaction of latex microspheres with mouse Peyer's patch membranous M-cells was studied in a mouse gut loop model after the microspheres were coated with a variety of agents. Carboxylated microspheres (diameter 0.5 micron) were covalently coated with lectins Ulex europaeus 1, Concanavalin A, Euonymus europaeus and Bandeiraea simplicifolia 1 isolectin-B4, human immunoglobulin A or bovine serum albumin. Of the treatments examined, only Ulex europaeus (UEA1) resulted in significant selective binding of microspheres to M-cells. UEA1-coated microspheres bound to M-cells at a level 100-fold greater than BSA-coated microspheres, but binding to enterocytes was unaffected. Incubation of UEA1-coated microspheres with alpha-L-fucose reduced M-cell binding to a level comparable with BSA-coated microspheres. This indicated that targeting by UEA1 was via a carbohydrate receptor on the M-cell surface. Adherence of UEA1-coated microspheres to M-cells occurred within 10 min of inoculation into mouse gut loops and UEA1-coated microspheres were transported to 10 microns below the apical surface of M-cells within 60 min of inoculation. UEA1-coated microspheres also targeted mouse Peyer's patch M-cells after intragastric administration. These results demonstrated that altering the surface chemistry of carboxylated polystyrene microspheres increased M-cell targeting, suggesting a strategy to enhance delivery of vaccine antigens to the mucosal immune system.

  2. Investigation of defects on PAMS microspheres fabricated with microencapsulation method

    International Nuclear Information System (INIS)

    Chen Sufen; Li Bo; Liu Yiyang; Zhang Zhanwen; Qi Xiaobo

    2012-01-01

    Poly-(α-methylstyrene) (PAMS) microspheres were fabricated with W1/O/W2 double emulsion microencapsulation method, and the effects of polyvinylalcohol (PVA) and CaCl 2 weight concentrations and the O/W2 phase ratio on the percentages of defected PAMS microspheres were studied. The weight concentrations of PVA and CaCl 2 and the O/W2 phase ratio in the fabrication process of PAMS microspheres were optimized. The results show that, for the three parameters being 1.0%, 1.5%, and 0.01, respectively, the percentage of the defect-free PAMS microspheres without vacuoles in the shell wall can be up to 60%. (authors)

  3. Preparation and characterization of composite microspheres for brachytherapy and hyperthermia treatment of cancer

    International Nuclear Information System (INIS)

    Zhao Di; Huang Wenhai; Rahaman, Mohamed N.; Day, Delbert E.; Wang Deping; Gu Yifei

    2012-01-01

    Composite microspheres were prepared by coating yttrium–aluminum–silicate (YAS) glass microspheres (20–30 μm) with a layer of Fe 3 O 4 nanoparticles and evaluated for potential use in brachytherapy and hyperthermia treatment of cancer. After neutron activation to form the β-emitting 90 Y radionuclide, the composite microspheres can be injected into a patient to destroy cancerous tumors; at the same time, the composite microspheres can generate heat upon application of a magnetic field to also destroy the tumors. The results showed that the composite microspheres were chemically durable when immersed in a simulated body fluid (SBF), with ∼ 0.25% weight loss and ∼ 3.2% yttrium dissolved into the SBF after 30 days at 37 °C. The composite microspheres also showed ferromagnetic properties as a result of the Fe 3 O 4 coating; when immersed in water at 20 °C (20 mg in 1 mL of water), the application of an alternating magnetic field produced a temperature increase from 20 °C to 38−46 °C depending on the thickness of the Fe 3 O 4 coating. The results indicate that these composite microspheres have promising potential in combined brachytherapy and hyperthermia treatment of cancerous tumors. - Highlights: ► Composite microspheres for brachytherapy and hyperthermia treatment of cancer. ► Fe 3 O 4 nanoparticles coated on the yttrium–aluminum–silicate glass microspheres. ► Microspheres are chemically stable in SBF. ► Microspheres can generate heat for hyperthermia under an alternating magnetic field. ► Microspheres can emit β-rays for brachytherapy after neutron activation.

  4. A Potentiometric Formaldehyde Biosensor Based on Immobilization of Alcohol Oxidase on Acryloxysuccinimide-modified Acrylic Microspheres

    Directory of Open Access Journals (Sweden)

    Lee Yook Heng

    2010-11-01

    Full Text Available A new alcohol oxidase (AOX enzyme-based formaldehyde biosensor based on acrylic microspheres has been developed. Hydrophobic poly(n-butyl acrylate-N-acryloxy-succinimide [poly(nBA-NAS] microspheres, an enzyme immobilization matrix, was synthesized using photopolymerization in an emulsion form. AOX-poly(nBA-NAS microspheres were deposited on a pH transducer made from a layer of photocured and self-plasticized polyacrylate membrane with an entrapped pH ionophore coated on a Ag/AgCl screen printed electrode (SPE. Oxidation of formaldehyde by the immobilized AOX resulted in the production of protons, which can be determined via the pH transducer. Effects of buffer concentrations, pH and different amount of immobilization matrix towards the biosensor’s analytical performance were investigated. The formaldehyde biosensor exhibited a dynamic linear response range to formaldehyde from 0.3–316.2 mM and a sensitivity of 59.41 ± 0.66 mV/decade (R2 = 0.9776, n = 3. The lower detection limit of the biosensor was 0.3 mM, while reproducibility and repeatability were 3.16% RSD (relative standard deviation and 1.11% RSD, respectively (n = 3. The use of acrylic microspheres in the potentiometric formaldehyde biosensor improved the biosensor’s performance in terms of response time, linear response range and long term stability when compared with thick film immobilization methods.

  5. Dietary Status and Impact of Risperidone on Nutritional Balance in Children with Autism: A Pilot Study

    Science.gov (United States)

    Lindsay, Ronald L.; Arnold, L. Eugene; Aman, Michael G.; Vitiello, Benedetto; Posey, David J.; McDougle, Christopher J.; Scahill, Lawrence; Pachler, Maryellen; McCracken, James T.; Tierney, Elaine; Bozzolo, Dawn

    2006-01-01

    Background: Risperidone may be effective in improving tantrums, aggression, or self-injurious behaviour in children with autism, but often leads to weight gain. Method: Using a quantitative Food Frequency Questionnaire (FFQ), we prospectively examined the nutritional intake of 20 children with autism participating in a randomised…

  6. Efficacy of Risperidone Augmentation with Ondansetron in the Treatment of Negative and Depressive Symptoms in Schizophrenia: A Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Roya Samadi

    2017-01-01

    Full Text Available Background: Given the potential role of the 5-hydroxytryptamine-3 receptor in the pathogenesis of schizophrenia, this study was performed to determine whether ondansetron plus risperidone could reduce the negative and depressive symptoms in patients with treatment-resistant schizophrenia. Methods: In a double-blinded, placebo-controlled, randomized trial (IRCT registration # 201112125280N7, in 2012–2013 in Mashhad, Iran, 38 patients with treatment-resistant schizophrenia received risperidone either combined with a fixed dose (4–8 mg/d of ondansetron (n=18 or with a placebo (n=20 for 12 weeks. The patients were evaluated using the Positive and Negative Syndrome Scale (PANSS, Wechsler’s Adult Intelligence Scale-Revised (WAIS-R, and Hamilton’s Rating Scale for Depression (HRSD at baseline and 12 weeks later. Changes in the inventories were used to evaluate the efficacy of the treatment. The t test, Chi-square test, and SPSS (version 16 were used to analyze the data. The statistical significance was set at P<0.05. Results: Ondansetron plus risperidone was associated with a significantly larger improvement in the PANSS overall scale and subscales for negative symptoms and cognition than was risperidone plus placebo (P<0.001. The WAIS-R scale results indicated significant differences between the 2 groups before and after administrating the medicine and the placebo. The administration of ondansetron significantly improved visual memory based on the subtests of the WAIS (P<0.05. Ondansetron had no positive effects on depressive symptoms (effect size=0.13. Conclusion: This study confirmed that ondansetron, as an adjunct treatment, reduces negative symptoms in patients with schizophrenia and can be used as a potential adjunctive strategy particularly for negative symptoms and cognitive impairments. Trial Registration Number: IRCT201112125280N7

  7. Effects of aripiprazole versus risperidone on brain activation during planning and social-emotional evaluation in schizophrenia: A single-blind randomized exploratory study.

    Science.gov (United States)

    Liemburg, Edith J; van Es, Frank; Knegtering, Henderikus; Aleman, André

    2017-10-03

    Impaired function of prefrontal brain networks may be the source of both negative symptoms and neurocognitive problems in psychotic disorders. Whereas most antipsychotics may decrease prefrontal activation, the partial dopamine D2-receptor agonist aripiprazole is hypothesized to improve prefrontal function. This study investigated whether patients with a psychotic disorder would show stronger activation of prefrontal areas and associated regions after treatment with aripiprazole compared to risperidone treatment. In this exploratory pharmacological neuroimaging study, 24 patients were randomly assigned to either aripiprazole or risperidone. At baseline and after nine weeks treatment they underwent an interview and MRI session. Here we report on brain activation (measured with arterial spin labeling) during performance of two tasks, the Tower of London and the Wall of Faces. Aripiprazole treatment decreased activation of the middle frontal, superior frontal and occipital gyrus (ToL) and medial temporal and inferior frontal gyrus, putamen and cuneus (WoF), while activation increased after risperidone. Activation increased in the ventral anterior cingulate and posterior insula (ToL), and superior frontal, superior temporal and precentral gyrus (WoF) after aripiprazole treatment and decreased after risperidone. Both treatment groups had increased ventral insula activation (ToL) and middle temporal gyrus (WoF), and decreased occipital cortex, precuneus and caudate head activation (ToL) activation. In conclusion, patients treated with aripiprazole may need less frontal resources for planning performance and may show increased frontotemporal and frontostriatal reactivity to emotional stimuli. More research is needed to corroborate and extend these preliminary findings. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Augmentation by escitalopram, but not citalopram or R-citalopram, of the effects of low-dose risperidone: behavioral, biochemical, and electrophysiological evidence.

    Science.gov (United States)

    Marcus, Monica M; Jardemark, Kent; Malmerfelt, Anna; Gertow, Jens; Konradsson-Geuken, Asa; Svensson, Torgny H

    2012-04-01

    Antidepressant drugs are frequently used to treat affective symptoms in schizophrenia. We have recently shown that escitalopram, but not citalopram or R-citalopram, increases firing rate and burst firing of midbrain dopamine neurons, potentiates cortical N-methyl-D-aspartate (NMDA) receptor-mediated transmission and enhances cognition, effects that might influence the outcome of concomitant antipsychotic medication. Here, we studied, in rats, the behavioral and neurobiological effects of adding escitalopram, citalopram, or R-citalopram to the second-generation antipsychotic drug risperidone. We examined antipsychotic efficacy using the conditioned avoidance response (CAR) test, extrapyramidal side effect (EPS) liability using a catalepsy test, dopamine outflow in the medial prefrontal cortex (mPFC) and nucleus accumbens using in vivo microdialysis in freely moving animals, and NMDA receptor-mediated transmission in the mPFC using intracellular electrophysiological recording in vitro. Only escitalopram (5 mg/kg), but not citalopram (10 mg/kg), or R-citalopram (10 mg/kg), dramatically enhanced the antipsychotic-like effect of a low dose of risperidone (0.25 mg/kg), without increasing catalepsy. Given alone, escitalopram, but not citalopram or R-citalopram, markedly enhanced both cortical dopamine output and NMDA receptor-mediated transmission. Addition of escitalopram and to some extent R-citalopram, but not citalopram, significantly enhanced both cortical dopamine output and cortical NMDA receptor-mediated transmission induced by a suboptimal dose/concentration of risperidone. These results suggest that adjunct treatment with escitalopram, but not citalopram, may enhance the effect of a subtherapeutic dose of risperidone on positive, negative, cognitive, and depressive symptoms in schizophrenia, yet without increased EPS liability. Copyright © 2011 Wiley Periodicals, Inc.

  9. Very Low-Dose Risperidone in First-Episode Psychosis: A Safe and Effective Way to Initiate Treatment

    Directory of Open Access Journals (Sweden)

    Patrick D. McGorry

    2011-01-01

    Full Text Available Patients experiencing a first psychotic episode have high rates of extrapyramidal symptoms (EPSs when treated with the doses of neuroleptics used in multiepisode or chronic schizophrenia. There is some evidence that lower doses may be equally, if not more, effective but less toxic in this population. Here, we report the results of a biphasic open label trial designed to assess the efficacy, safety, and tolerability of low-dose (2–4 mg/day risperidone treatment in a group of 96 first-episode nonaffective psychosis patients. At the end of the trial, 62% of patients met the response criteria although approximately 80% had achieved a response at some time during the study. Reports of EPS remained low, and there were no dystonic reactions. We conclude that even at a dose of 2 mg/day, risperidone was highly effective in reducing acute symptomatology in a real world sample of young first-episode psychosis patients.

  10. Risperidone Versus Methylphenidate in Treatment of Preschool Children With Attention-Deficit Hyperactivity Disorder

    OpenAIRE

    Arabgol, Fariba; Panaghi, Leily; Nikzad, Vahid

    2015-01-01

    Background: Attention Deficit Hyperactivity Disorder (ADHD) is a common psychiatric diagnosis among preschool children. Objectives: The aim of this study was to examine the Risperidone treatment compared to Methylphenidate (MPH) in preschool children with ADHD. Patients and Methods: Thirty three outpatient preschool children, aged 3-6 years, diagnosed with ADHD (The diagnosis of ADHD was established by two child and adolescent psychiatrists according to the DSM-IV-TR criteria), participated i...

  11. Polydimethylsiloxane microspheres with poly(methyl methacrylate) coating: Modelling, preparation, and characterization

    DEFF Research Database (Denmark)

    Ma, Baoguang; Hansen, Jens Henrik; Hvilsted, Søren

    2015-01-01

    functional PDMS microspheres were coated with poly(methyl methacrylate) (PMMA) by spin coating with different concentrations of PMMA solutions. The quality of the resulting PMMA shell is investigated using rheological measurements at 50 8C with a timesweep procedure. The results strongly suggest that PMMA-coated...... PDMS microspheres react around 20 times slower than the uncoated ones, and that the PMMA shell significantly hinders the reaction between the PDMS microsphere and cross-linker. Thus the thin PMMA shells are very efficient in protecting the reactive PDMS microspheres, since the PMMA shell forms...

  12. FEMIC (Fibromes Embolises aux MICrospheres calibrees): Uterine Fibroid Embolization using Tris-acryl Microspheres. A French Multicenter Study

    International Nuclear Information System (INIS)

    Joffre, Francis; Tubiana, Jean-Michel; Pelage, Jean-Pierre

    2004-01-01

    Purpose: A French multicenter registry was set up to confirm the safety and efficacy of large calibrated tris-acryl gelatin microspheres for embolization of symptomatic fibroids. Methods: Technical recommendations included embolization using large microspheres (>500 μm) with no secondary embolization agent. Postprocedural pain, clinical improvement and adverse events were prospectively evaluated during a follow-up period of at least 6 months.Results: Eighty-five women complaining of fibroid-related symptoms entered the study. In seven women, a secondary embolization agent was used in addition to microspheres. Complete resolution of menorrhagia was achieved in 84% of women at 24 months and significant uterine and fibroid volume reductions were noted after 6 months (37% and 73%, respectively). Three women experienced definitive amenorrhea (4%) and two women required hysteroscopic resection of a fibroid. Eight women were treated by hysterectomy because of treatment failure. In seven of these women, treatment failure was explained by an additional cause of symptoms including diffuse adenomyosis, endometrial hyperplasia or ovarian artery supply to the fibroids.Conclusion: Limited uterine artery embolization using large microspheres has good clinical success rate with low postprocedural pain and complications. Women can expect excellent midterm results with a high level of symptom control and significant fibroid volume reduction. Confidence in the end-point recommended here may require the experience of several cases

  13. From harmful Microcystis blooms to multi-functional core-double-shell microsphere bio-hydrochar materials.

    Science.gov (United States)

    Bi, Lei; Pan, Gang

    2017-11-13

    Harmful algal blooms (HABs) induced by eutrophication is becoming a serious global environmental problem affecting public health and aquatic ecological sustainability. A novel strategy for the utilization of biomass from HABs was developed by converting the algae cells into hollow mesoporous bio-hydrochar microspheres via hydrothermal carbonization method. The hollow microspheres were used as microreactors and carriers for constructing CaO 2 core-mesoporous shell-CaO 2 shell microspheres (OCRMs). The CaO 2 shells could quickly increase dissolved oxygen to extremely anaerobic water in the initial 40 min until the CaO 2 shells were consumed. The mesoporous shells continued to act as regulators restricting the release of oxygen from CaO 2 cores. The oxygen-release time using OCRMs was 7 times longer than when directly using CaO 2 . More interestingly, OCRMs presented a high phosphate removal efficiency (95.6%) and prevented the pH of the solution from rising to high levels in comparison with directly adding CaO 2 due to the OH - controlled-release effect of OCRMs. The distinct core-double-shell micro/nanostructure endowed the OCRMs with triple functions for oxygen controlled-release, phosphorus removal and less impact on water pH. The study is to explore the possibility to prepare smarter bio-hydrochar materials by utilizing algal blooms.

  14. Different MK-801 administration schedules induce mild to severe learning impairments in an operant conditioning task: role of buspirone and risperidone in ameliorating these cognitive deficits.

    Science.gov (United States)

    Rapanelli, Maximiliano; Frick, Luciana Romina; Bernardez-Vidal, Micaela; Zanutto, Bonifacio Silvano

    2013-11-15

    Blockade of N-methyl-d-aspartate receptor (NMDA) by the noncompetitive NMDA receptor (NMDAR) antagonist MK-801 produces behavioral abnormalities and alterations in prefrontal cortex (PFC) functioning. Due to the critical role of the PFC in operant conditioning task learning, we evaluated the effects of acute, repeated postnatal injections of MK-801 (0.1mg/kg) on learning performance. We injected Long-Evans rats i.p. with MK-801 (0.1mg/kg) using three different administration schedules: injection 40 min before beginning the task (during) (n=12); injection twice daily for six consecutive days prior to beginning the experimental procedures (prior) (n=12); or twice daily subcutaneous injections from postnatal day 7 to 11 (postnatal) (n=12). Next, we orally administered risperidone (serotonin receptor 2A and dopamine receptor 2 antagonist, 1mg/kg) or buspirone (serotonin receptor 1A partial agonist, 10mg/kg) to animals treated with the MK-801 schedule described above. The postnatal and prior administration schedules produced severe learning deficits, whereas injection of MK-801 just before training sessions had only mild effects on acquisition of an operant conditioning. Risperidone was able to reverse the detrimental effect of MK-801 in the animals that were treated with MK-801 during and prior training sessions. In contrast, buspirone was only effective at mitigating the cognitive deficits induced by MK-801 when administered during the training procedures. The data demonstrates that NMDA antagonism disrupts basic mechanisms of learning in a simple PFC-mediated operant conditioning task, and that buspirone and risperidone failed to attenuate the learning deficits when NMDA neurotransmission was blocked in the early stages of the postnatal period. Copyright © 2013 Elsevier B.V. All rights reserved.

  15. Polymer based microspheres of aceclofenac as sustained release parenterals for prolonged anti-inflammatory effect

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Manpreet; Sharma, Sumit; Sinha, VR, E-mail: sinha_vr@rediffmail.com

    2017-03-01

    Poly(lactic-co-glycolic acid) (PLGA) (75:25) and polycaprolactone (PCL) microspheres were fabricated for prolonged release of aceclofenac by parenteral administration. Microspheres encapsulating aceclofenac were designed to release the drug at controlled rate for around one month. Biodegradable microspheres were prepared by solvent emulsification evaporation method in different polymer:drug ratios (1:1, 2:1 and 3:1). After drug loading, PLGA and PCL microspheres showed a controlled size distribution with an average size of 11.75 μm and 3.81 μm respectively and entrapment efficiency in the range of 90 ± 0.72% to 91.06 ± 4.01% with PLGA and 83.01 ± 2.13% to 90.4 ± 2.11% with PCL. Scanning electron microscopy has confirmed good spherical structures of microspheres. The percent yield of biodegradable polymeric microspheres ranged between 30.95 ± 10.14% to 92.84 ± 3.15% and 47.33 ± 4.72% to 80 ± 3.60% for PLGA and PCL microspheres respectively. PLGA microspheres followed Higuchi release pattern while Korsmeyer-Peppas explained the release pattern of PCL microspheres. Stability studies of microspheres were also carried out by storing the preparations at 2-8 °C for 30, 60 and 90 days and evaluating them for entrapment efficiency, residual drug content and polymer drug compatability. In-vivo studies showed significant anti-inflammatory activity of microspheres upto 48 hours using the carrageenan induced rat paw oedema model. - Highlights: • PLGA and PCL polymeric microspheres for parenteral prolonged drug delivery system were formulated. • Polymeric microspheres were characterized physically and drug excipient incompatability. • Three months accelerated stability studies were carried for drug loaded polymeric microspheres. • Pharmacodynamic studies prove the rationality of sustained therapeutic effect of designed drug delivery system.

  16. Controllable growth and photocatalytic activity of Cu{sub 2}O solid microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Hong; Zhang, Junying, E-mail: zjy@buaa.edu.cn; Wang, Mei

    2013-09-01

    Graphical abstract: - Highlights: • 3 μm uniform Cu{sub 2}O solid microspheres with abundant nanopores are achieved. • NH{sub 2}OH·HCl and SDS are main factors that manipulate morphologies of Cu{sub 2}O particles. • Surface features of microspheres influenced the photocatalytic activity of Cu{sub 2}O. • Microspheres are transforming to polyhedrons with extended holding time. - Abstract: A series of Cu{sub 2}O solid microspheres with different surface features were prepared and their photocatalytic activities were studied. The experiment conditions were investigated and the formation mechanism was explored systematically. It was found that varying the amounts of NH{sub 2}OH·HCl reductant in alkaline solutions changed the reaction process and thus altered the surface features of Cu{sub 2}O microspheres. Sodium dodecyl sulfate (SDS) surfactant, introduced as a morphology directing agent, caused the nuclei aggregation and growth process of Cu{sub 2}O solid microspheres by precisely realizing the opposite charges’ directional attraction. This SDS-mediated method can be readily extended to synthesizing solid microspheres of other metal oxides. Meanwhile, it was found that Cu{sub 2}O solid microspheres with abundant nanopores on the surface showed much higher efficient catalytic activity for decoloring methyl orange (MO) aqueous solution than with other surface features under visible light irradiation. Furthermore, we found that prolonging the holding time made Cu{sub 2}O microspheres transform to polyhedrons.

  17. Enteric-coated epichlorohydrin crosslinked dextran microspheres for site-specific delivery to colon.

    Science.gov (United States)

    Rai, Gopal; Yadav, Awesh K; Jain, Narendra K; Agrawal, Govind P

    2015-01-01

    Enteric-coated epichlorohydrin crosslinked dextran microspheres containing 5-Fluorouracil (5-FU) for colon drug delivery was prepared by emulsification-crosslinking method. The formulation variables studied includes different molecular weights of dextran, volume of crosslinking agent, stirring speed, time and temperature. Dextran microspheres showed mean entrapment efficiencies ranging between 77 and 87% and mean particle size ranging between 10 and 25 µm. About 90% of drug was released from uncoated dextran microspheres within 8 h, suggesting the fast release and indicated the drug loaded in uncoated microspheres, released before they reached colon. Enteric coating (Eudragit-S-100 and Eudragit-L-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method. The release study of 5-FU from coated dextran microspheres was complete retardation in simulated gastric fluid (pH 1.2) and once the coating layer of enteric polymer was dissolved at higher pH (7.4 and 6.8), a controlled release of the drug from the microspheres was observed. Further, the release of drug was found to be higher in the presence of dextranase and rat caecal contents, indicating the susceptibility of dextran microspheres to colonic enzymes. Organ distribution and pharmacokinetic study in albino rats was performed to establish the targeting potential of optimized formulation in the colon.

  18. A Comparative Study of Production of Glass Microspheres by using Thermal Process

    Science.gov (United States)

    Lee, May Yan; Tan, Jully; Heng, Jerry YY; Cheeseman, Christopher

    2017-06-01

    Microspheres are spherical particles that can be distinguished into two categories; solid or hollow. Microspheres typical ranges from 1 to 200 μm in diameter. Microsphere are made from glass, ceramic, carbon or plastic depending on applications. Solid glass microsphere is manufactured by direct burning of glass powders while hollow glass microspheres is produced by adding blowing agent to glass powder. This paper presented the production of glass microspheres by using the vertical thermal flame (VTF) process. Pre-treated soda lime glass powder with particle sized range from 90 to 125μm was used in this work. The results showed that glass microspheres produced by two passes through the flame have a more spherical shape as compared with the single pass. Under the Scanning Electron Microscope (SEM), it is observed that there is a morphology changed from uneven surface of glass powders to smooth spherical surface particles. Qualitative analysis for density of the pre-burned and burned particles was performed. Burned particles floats in water while pre-burned particles sank indicated the change of density of the particles. Further improvements of the VTF process in terms of the VTF set-up are required to increase the transformation of glass powders to glass microspheres.

  19. Apparatus for manufacturing ceramics microspheres for cementing applications

    NARCIS (Netherlands)

    2012-01-01

    A method and apparatus for manufacturing ceramic microspheres from industrial slag. The micro spheres have a particle size of about 38 microns to about 150 microns. The microspheres are used to create a cement slurry having a density of at least about Illbs/g. The resultant cement slurry may then be

  20. DEGRADATION AND INTRAHEPATIC COMPATIBILITY OF ALBUMIN-HEPARIN CONJUGATE MICROSPHERES

    NARCIS (Netherlands)

    CREMERS, HFM; WOLF, RFE; BLAAUW, EH; SCHAKENRAAD, JM; LAM, KH; NIEUWENHUIS, P; VERRIJK, R; KWON, G; BAE, YH; KIM, SW; FEIJEN, J

    The in vitro degradation properties of glutaraldehyde cross-linked albumin and albumin-heparin conjugate microspheres (AMS and AHCMS respectively) were evaluated using light microscopy, turbidity measurements and heparin release determinations, showing that the microspheres are degraded by

  1. Preparation and in-vitro characterization of Risperidone-cyclodextrin inclusion complexes as a potential injectable product

    Directory of Open Access Journals (Sweden)

    D Shukla

    2009-12-01

    Full Text Available "n  "n Background and the purpose of the study: This investigation deals with risperidone cyclodextrin (CD complexation for parenteral administration to improve its aqueous solubility which would be beneficial over immediate and sustained release formulations available in market especially for agitated and non-cooperative psychotic patients. "nMethods: The phase solubility study of the drug with β-CD, hydroxypropyl (HP-β-CD and γ-CD was conducted and CDs with higher stability constants were selected for complexation. The complexes of Risperidone with β-CD and HP-β-CD were prepared by precipitation and vacuum drying methods, respectively. Fourier transform-infrared, X-ray diffraction and differential scanning calorimetry techniques were used for characterization of complexes. Drug precipitation study of complex's solution in water for injection and 100 ml of 0.1 M pH 7.4 phosphate buffer saline and stability study in accelerated condition were also carried out. "nResults: The stability constants of the CD were in the following order: β-CD (341.953±11.87 M-1 > HP-β-CD (170.817± 5.93 M-1 > γ-CD (93.716 ± 3.25 M-1. CDs with high stability constants were selected to prepare the drug CD complex. The complexation efficiencies of β-CD and HP-β-CD were 95.23 ± 2.27% and 97.59 ±1.97%, respectively. Both types of CDs exhibited complexation at 1:2 molar stoichiometric ratio. The drug precipitation study indicated complete solubility (100% drug dissolution without a trace of precipitate within 5 mins. The complexes were found to be stable for a period of 3 months under accelerated stability conditions. Major conclusion:Stable complexes of risperidone were successfully formulated using both β-CD and HP-β-CD by simple and highly efficient methods of complexation for parenteral administration.

  2. Dried Blood Spots Combined With Ultra-High-Performance Liquid Chromatography-Mass Spectrometry for the Quantification of the Antipsychotics Risperidone, Aripiprazole, Pipamperone, and Their Major Metabolites.

    Science.gov (United States)

    Tron, Camille; Kloosterboer, Sanne M; van der Nagel, Bart C H; Wijma, Rixt A; Dierckx, Bram; Dieleman, Gwen C; van Gelder, Teun; Koch, Birgit C P

    2017-08-01

    Risperidone, aripiprazole, and pipamperone are antipsychotic drugs frequently prescribed for the treatment of comorbid behavioral problems in children with autism spectrum disorders. Therapeutic drug monitoring (TDM) could be useful to decrease side effects and to improve patient outcome. Dried blood spot (DBS) sample collection seems to be an attractive technique to develop TDM of these drugs in a pediatric population. The aim of this work was to develop and validate a DBS assay suitable for TDM and home sampling. Risperidone, 9-OH risperidone, aripiprazole, dehydroaripiprazole, and pipamperone were extracted from DBS and analyzed by ultra-high-performance liquid chromatography-tandem mass spectrometry using a C18 reversed-phase column with a mobile phase consisting of ammonium acetate/formic acid in water or methanol. The suitability of DBS for TDM was assessed by studying the influence of specific parameters: extraction solution, EDTA carryover, hematocrit, punching location, spot volume, and hemolysis. The assay was validated with respect to conventional guidelines for bioanalytical methods. The method was linear, specific without any critical matrix effect, and with a mean recovery around 90%. Accuracy and imprecision were within the acceptance criteria in samples with hematocrit values from 30% to 45%. EDTA or hemolysis did not skew the results, and no punching carryover was observed. No significant influence of the spot volume or the punch location was observed. The antipsychotics were all stable in DBS stored 10 days at room temperature and 1 month at 4 or -80°C. The method was successfully applied to quantify the 3 antipsychotics and their metabolites in patient samples. A UHPLC-MS/MS method has been successfully validated for the simultaneous quantification of risperidone, 9-OH risperidone, aripiprazole, dehydroaripiprazole, and pipamperone in DBS. The assay provided good analytical performances for TDM and clinical research applications.

  3. Glass microspheres for medical applications

    Science.gov (United States)

    Conzone, Samuel David

    Radioactive dysprosium lithium borate glass microspheres have been developed as biodegradable radiation delivery vehicles for the radiation synovectomy treatment of rheumatoid arthritis. Once injected into a diseased joint, the microspheres deliver a potent dose of radiation to the diseased tissue, while a non-uniform chemical reaction converts the glass into an amorphous, porous, hydrated dysprosium phosphate reaction product. The non-radioactive, lithium-borate component is dissolved from the glass (up to 94% weight loss), while the radioactive 165Dy reacts with phosphate anions in the body fluids, and becomes "chemically" trapped in a solid, dysprosium phosphate reaction product that has the same size as the un-reacted glass microsphere. Ethylene diamine tetraacetate (EDTA) chelation therapy can be used to dissolve the dysprosium phosphate reaction product after the radiation delivery has subsided. The dysprosium phosphate reaction product, which formed in vivo in the joint of a Sprague-Dawley rat, was dissolved by EDTA chelation therapy in 100 Gy) of localized beta radiation to a treatment site within the body, followed by complete biodegradability. The non-uniform reaction process is a desirable characteristic for a biodegradable radiation delivery vehicle, but it is also a novel material synthesis technique that can convert a glass to a highly porous materials with widely varying chemical composition by simple, low-temperature, glass/solution reaction. The reaction product formed by nonuniform reaction occupies the same volume as the un-reacted glass, and after drying for 1 h at 300°C, has a specific surface area of ≈200 m2/g, a pore size of ≈30 nm, and a nominal crushing strength of ≈10 MPa. Finally, rhenium glass microspheres, composed of micron-sized, metallic rhenium particles dispersed within a magnesium alumino borate glass matrix were produced by sintering ReO2 powder and glass frit at 1050°C. A 50 mg injection of radioactive rhenium glass

  4. BIOCOMPATIBLE FLUORESCENT MICROSPHERES: SAFE PARTICLES FOR MATERIAL PENETRATION STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Farquar, G; Leif, R

    2009-07-15

    Biocompatible polymers with hydrolyzable chemical bonds have been used to produce safe, non-toxic fluorescent microspheres for material penetration studies. The selection of polymeric materials depends on both biocompatibility and processability, with tailored fluorescent properties depending on specific applications. Microspheres are composed of USFDA-approved biodegradable polymers and non-toxic fluorophores and are therefore suitable for tests where human exposure is possible. Micropheres were produced which contain unique fluorophores to enable discrimination from background aerosol particles. Characteristics that affect dispersion and adhesion can be modified depending on use. Several different microsphere preparation methods are possible, including the use of a vibrating orifice aerosol generator (VOAG), a Sono-Tek atomizer, an emulsion technique, and inkjet printhead. Applications for the fluorescent microspheres include challenges for biodefense system testing, calibrants for biofluorescence sensors, and particles for air dispersion model validation studies.

  5. Preparation and evaluation of enrofloxacin microspheres and tissue distribution in rats.

    Science.gov (United States)

    Yang, Fan; Kang, Jijun; Yang, Fang; Zhao, Zhensheng; Kong, Tao; Zeng, Zhenling

    2015-01-01

    New enrofloxacin microspheres were formulated, and their physical properties, lung-targeting ability, and tissue distribution in rats were examined. The microspheres had a regular and round shape. The mean diameter was 10.06 µm, and the diameter of 89.93% of all microspheres ranged from 7.0 µm to 30.0 µm. Tissue distribution of the microspheres was evaluated along with a conventional enrofloxacin preparation after a single intravenous injection (7.5 mg of enrofloxacin/kg bw). The results showed that the elimination half-life (t1/2β) of enrofloxacin from lung was prolonged from 7.94 h for the conventional enrofloxacin to 13.28 h for the microspheres. Area under the lung concentration versus time curve from 0 h to ∞ (AUC00∞) was increased from 11.66 h·µg/g to 508.00 h·µg/g. The peak concentration (Cmax) in lung was increased from 5.95 µg/g to 93.36 µg/g. Three lung-targeting parameters were further assessed and showed that the microspheres had remarkable lung-targeting capabilities.

  6. Biodegradable microsphere-mediated cell perforation in microfluidic channel using femtosecond laser

    Science.gov (United States)

    Ishii, Atsuhiro; Ariyasu, Kazumasa; Mitsuhashi, Tatsuki; Heinemann, Dag; Heisterkamp, Alexander; Terakawa, Mitsuhiro

    2016-05-01

    The use of small particles has expanded the capability of ultrashort pulsed laser optoinjection technology toward simultaneous treatment of multiple cells. The microfluidic platform is one of the attractive systems that has obtained synergy with laser-based technology for cell manipulation, including optoinjection. We have demonstrated the delivery of molecules into suspended-flowing cells in a microfluidic channel by using biodegradable polymer microspheres and a near-infrared femtosecond laser pulse. The use of polylactic-co-glycolic acid microspheres realized not only a higher optoinjection ratio compared to that with polylactic acid microspheres but also avoids optical damage to the microfluidic chip, which is attributable to its higher optical intensity enhancement at the localized spot under a microsphere. Interestingly, optoinjection ratios to nucleus showed a difference for adhered cells and suspended cells. The use of biodegradable polymer microspheres provides high throughput optoinjection; i.e., multiple cells can be treated in a short time, which is promising for various applications in cell analysis, drug delivery, and ex vivo gene transfection to bone marrow cells and stem cells without concerns about residual microspheres.

  7. A double-blind placebo controlled trial of piracetam added to risperidone in patients with autistic disorder.

    Science.gov (United States)

    Akhondzadeh, Shahin; Tajdar, Hamid; Mohammadi, Mohammad-Reza; Mohammadi, Mohammad; Nouroozinejad, Gholam-Hossein; Shabstari, Omid L; Ghelichnia, Hossein-Ali

    2008-09-01

    It has been reported that autism is a hypoglutamatergic disorder. Therefore, it was of interest to assess the efficacy of piracetam, a positive modulator of AMPA-sensitive glutamate receptors in autistic disorder. About 40 children between the ages three and 11 years (inclusive) with a DSM IV clinical diagnosis of autism and who were outpatients from a specialty clinic for children were recruited. The children presented with a chief complaint of severely disruptive symptoms related to autistic disorder. Patients were randomly allocated to piracetam + risperidone (Group A) or placebo + risperidone (Group B) for a 10-week, double-blind, placebo-controlled study. The dose of risperidone was titrated up to 2 mg/day for children between 10 and 40 kg and 3 mg/day for children weighting above 40 kg. The dose of piracetam was titrated up to 800 mg/day. Patients were assessed at baseline and after 2, 4, 6, 8 and 10 weeks of starting medication. The measure of the outcome was the Aberrant Behavior Checklist-Community (ABC-C) Rating Scale (total score). The ABC-C Rating Scale scores improved with piracetam. The difference between the two protocols was significant as indicated by the effect of group, the between subjects factor (F = 5.85, d.f. = 1, P = 0.02). The changes at the endpoint compared with baseline were: -11.90 +/- 3.79 (mean +/- SD) and -5.15 +/- 3.04 for group A and B respectively. A significant difference was observed on the change in scores in the ABC-C Rating Scale in week 10 compared with baseline in the two groups (t = 6.017, d.f. = 38, P treatment of autism.

  8. Trapping of microwave radiation in hollow polypyrrole microsphere through enhanced internal reflection: A novel approach

    OpenAIRE

    Ritwik Panigrahi; Suneel K. Srivastava

    2015-01-01

    In present work, spherical core (polystyrene, PS)/shell (polypyrrole, PPy) has been synthesized via in situ chemical oxidative copolymerization of pyrrole (Py) on the surface of sulfonated PS microsphere followed by the formation of hollow polypyrrole (HPPy) shell by dissolving PS inner core in THF. Thereafter, we first time established that such fabricated novel art of morphology acts as a conducting trap in absorbing electromagnetic (EM) wave by internal reflection. Further studies have bee...

  9. Regional trends in the use of short-acting and long-acting contraception accessed through the private and public sectors.

    Science.gov (United States)

    Ugaz, Jorge I; Chatterji, Minki; Gribble, James N; Mitchell, Susan

    2015-08-01

    To examine trends in the source of modern contraception (public versus private sector); method choice (long-acting or permanent methods versus short-acting methods); and method and source combined. A retrospective analysis was conducted using data collected by national Demographic and Health Surveys and Reproductive Health Surveys during the period 1992-2012. The dataset included 18 low-income countries in Sub-Saharan Africa, 10 from Latin America and the Caribbean (LAC), and 8 from Asia. A substantial proportion-between 40% and 49%-of modern contraceptive users relied on the private sector in Asia and LAC in the last 20years, yet the proportion has been smaller in Sub-Saharan Africa, between 27% and 30%. Increased use of short-acting methods from both public and private sectors has driven the rise in contraceptive prevalence in Asia and LAC. Similarly, increased contraceptive prevalence in Sub-Saharan Africa reflected the increased use of short-acting methods obtained mainly through the public sector, with only limited use of long-acting or permanent methods through the private sector. The private sector has played a key role in the increase of modern CPR and the provision of modern contraceptives around the world, providing almost half of them in low-income countries. Yet, such increase was driven primarily by a more substantial role in the provision of short-acting methods than long acting and permanent methods. Crown Copyright © 2015. Published by Elsevier Ireland Ltd. All rights reserved.

  10. Development and evaluation of intestinal targeted mucoadhesive microspheres of Bacillus coagulans.

    Science.gov (United States)

    Alli, Sk Md Athar; Ali, Sk Md Ajhar; Samanta, Amalesh

    2011-11-01

    Intestinal targeted mucoadhesive microsphere of probiotics may provide numerous associated health benefits. To develop mucoadhesive microspheres that will deliver viable probiotic cells into gut protectively against harsh environmental conditions of stomach for extended period. Core mucoadhesive microspheres of Bacillus coagulans were prepared using hypromellose, following coacervation and phase separation technique and were then coated with hypromellose phthalate to achieve their site-specific release. Microspheres were evaluated for percent yield, entrapment efficiency, surface morphology, particle size and size distribution, flow property, swelling property, mucoadhesion property by the in vitro wash-off and the ex vivo mucoadhesive strength tests, in vitro release profile and release kinetic, in vivo probiotic activity, and stability. The values for kinetic constant and regression coefficient of model-dependent approaches and the difference factor, the similarity factor, and the Rescigno index of model-independent approaches were determined for accessing and comparing in vitro performance. Microsphere formulation batches have percent yield value between 56.26% and 69.13% and entrapment efficiency value between 66.95% and 77.89%. Microspheres were coarser with spherical shape having mean particle size from 28.03 to 48.31 μm. In vitro B. coagulans release profile follows zero-order kinetics and depends on the grade of hypromellose and the B. coagulans-to-hypromellose ratio. Experimental microspheres rendered adequate stability to B. coagulans at room temperature. Microspheres had delivered B. coagulans in simulated intestinal condition following zero-order kinetics, protectively in simulated gastric condition, exhibiting appreciable mucoadhesion in intestinal condition, which could be useful to achieve site-specific delivery for extended period.

  11. Microsphere erosion in outer hydrogel membranes creating macroscopic porosity to counter biofouling-induced sensor degradation.

    Science.gov (United States)

    Vaddiraju, S; Wang, Y; Qiang, L; Burgess, D J; Papadimitrakopoulos, F

    2012-10-16

    Biofouling and tissue inflammation present major challenges toward the realization of long-term implantable glucose sensors. Following sensor implantation, proteins and cells adsorb on sensor surfaces to not only inhibit glucose flux but also signal a cascade of inflammatory events that eventually lead to permeability-reducing fibrotic encapsulation. The use of drug-eluting hydrogels as outer sensor coatings has shown considerable promise to mitigate these problems via the localized delivery of tissue response modifiers to suppress inflammation and fibrosis, along with reducing protein and cell absorption. Biodegradable poly (lactic-co-glycolic) acid (PLGA) microspheres, encapsulated within a poly (vinyl alcohol) (PVA) hydrogel matrix, present a model coating where the localized delivery of the potent anti-inflammatory drug dexamethasone has been shown to suppress inflammation over a period of 1-3 months. Here, it is shown that the degradation of the PLGA microspheres provides an auxiliary venue to offset the negative effects of protein adsorption. This was realized by: (1) the creation of fresh porosity within the PVA hydrogel following microsphere degradation (which is sustained until the complete microsphere degradation) and (2) rigidification of the PVA hydrogel to prevent its complete collapse onto the newly created void space. Incubation of the coated sensors in phosphate buffered saline (PBS) led to a monotonic increase in glucose permeability (50%), with a corresponding enhancement in sensor sensitivity over a 1 month period. Incubation in serum resulted in biofouling and consequent clogging of the hydrogel microporosity. This, however, was partially offset by the generated macroscopic porosity following microsphere degradation. As a result of this, a 2-fold recovery in sensor sensitivity for devices with microsphere/hydrogel composite coatings was observed as opposed to similar devices with blank hydrogel coatings. These findings suggest that the use of

  12. ADRIAMYCIN-LOADED ALBUMIN-HEPARIN CONJUGATE MICROSPHERES FOR INTRAPERITONEAL CHEMOTHERAPY

    NARCIS (Netherlands)

    CREMERS, HFM; SEYMOUR, LW; LAM, K; LOS, G; KWON, G; BAE, YH; KIM, SW; FEIJEN, J

    1994-01-01

    Adriamycin-loaded albumin-heparin conjugate microspheres (ADR-AHCMS) were evaluated as possible intraperitoneal (i.p.) delivery systems for site-specific cytotoxic action. The biocompatibility of the microspheres after intraperitoneal injection was tested first. 1 day after i.p. administration of

  13. Biomimetic mineralization of calcium carbonate/carboxymethylcellulose microspheres for lysozyme immobilization

    International Nuclear Information System (INIS)

    Lu Zheng; Zhang Juan; Ma Yunzi; Song Siyue; Gu Wei

    2012-01-01

    Porous calcium carbonate/carboxymethylcellulose (CaCO 3 /CMC) microspheres were prepared by the biomimetic mineralization method for lysozyme immobilization via adsorption. The size and morphology of CaCO 3 /CMC microspheres were characterized by transmitted electron microscopy (TEM) and zeta potential measurement. The lysozyme immobilization was verified by Fourier transform infrared (FTIR) spectroscopy. The effects of pHs and temperatures on lysozyme adsorption were investigated as well. It was revealed that CaCO 3 /CMC microspheres could immobilize lysozyme efficiently via electrostatic interactions and a maximum adsorption capacity of 450 mg/g was achieved at pH 9.2 and 25 °C. Moreover, it was found that the adsorption process fitted well with the Langmuir isothermal model. In addition, UV, fluorescence, and circular dichroism (CD) spectroscopic studies showed that lysozyme maintained its original secondary structure during the adsorption/desorption process. Our study therefore demonstrated that CaCO 3 /CMC microsphere can be used as a cost-effective and efficient support for lysozyme immobilization. - Graphical abstract: CaCO 3 /CMC microsphere was prepared by a facile biomimetic mineralization method and can be used as an efficient and cost-effective support for lysozyme immobilization. Highlights: ► CaCO 3 /CMC microspheres were prepared by the biomimetic mineralization method. ► Lysozyme was efficiently immobilized to CaCO 3 /CMC microspheres via adsorption. ► A maximum adsorption capacity of 450 mg/g was obtained at pH 9.2 and 25 °C. ► The original secondary structure of lysozyme was maintained upon immobilization.

  14. Pregnancy exposure to olanzapine, quetiapine, risperidone, aripiprazole and risk of congenital malformations. A systematic review

    DEFF Research Database (Denmark)

    Ennis, Zandra Nymand; Damkier, Per

    2015-01-01

    /22 (5.1%) and 100/5 (5.0%), respectively. Relative risk estimates and 95% confidence intervals were 1.0 (0.7-1.4) (olanzapine), 1.0 (0.6-1.7) (quetiapine), 1.5 (0.9-2.2) (risperidone) and 1.4 (0.5-3.1) (aripiprazole). First-trimester exposure to olanzapine is not associated with an increased risk...

  15. Formulation and Evaluation of Microsphere Based Oro Dispersible Tablets of Itopride Hcl

    Directory of Open Access Journals (Sweden)

    S.S Agrawal

    2012-09-01

    Full Text Available Background The purpose of the present work is to mask the intensely bitter taste of Itopride HCl and to formulate an Oro dispersible tablet (ODT of the taste-masked drug by incorporation of microspheres in the tablets for use in specific populations viz. pediatrics, geriatrics and patients experiencing difficulty in swallowing.Methods:With this objective in mind, microspheres loaded with Itopride HCl were prepared by solvent evaporation method using acetone as solvent for pH-sensitive polymer, Eudragit EPO and light liquid paraffin as the encapsulating medium. The prepared microspheres were characterized with regard to yield, drug content, flow properties, particle size and size distribution, surface features, in vitro drug release and taste. The ODTs so prepared from these microspheres were evaluated for hardness, thickness, weight variation, friability, disintegration time, drug content, wetting time, water absorption ratio, moisture uptake, in vitro dispersion, in vitro disintegration, in vitro drug release and stability. Results:The average size of microspheres was found to be satisfactory in terms of the size and size distribution. Microspheres prepared were of a regular spherical shape. Comparison of the dissolution profiles of microspheres in different pH media showed that microspheres having drug: polymer ratio of 1:2 produced a retarding effect in simulated salivary fluid (pH 6.8 and were further used for formulation into ODTs after addition of suitable amounts of excipients such as superdisintegrant, diluent, sweetener and flavor of directly compressible grade. ConclusionsEffective taste-masking was achieved for Itopride HCl by way of preparation of microspheres and ODTs of acceptable characteristics.

  16. Formulation and evaluation of microsphere based oro dispersible tablets of itopride hcl

    Directory of Open Access Journals (Sweden)

    Shah Sanjay

    2012-09-01

    Full Text Available Abstract Background The purpose of the present work is to mask the intensely bitter taste of Itopride HCl and to formulate an Oro dispersible tablet (ODT of the taste-masked drug by incorporation of microspheres in the tablets for use in specific populations viz. pediatrics, geriatrics and patients experiencing difficulty in swallowing. Methods With this objective in mind, microspheres loaded with Itopride HCl were prepared by solvent evaporation method using acetone as solvent for pH-sensitive polymer, Eudragit EPO and light liquid paraffin as the encapsulating medium. The prepared microspheres were characterized with regard to yield, drug content, flow properties, particle size and size distribution, surface features, in vitro drug release and taste. The ODTs so prepared from these microspheres were evaluated for hardness, thickness, weight variation, friability, disintegration time, drug content, wetting time, water absorption ratio, moisture uptake, in vitro dispersion, in vitro disintegration, in vitro drug release and stability. Results The average size of microspheres was found to be satisfactory in terms of the size and size distribution. Microspheres prepared were of a regular spherical shape. Comparison of the dissolution profiles of microspheres in different pH media showed that microspheres having drug: polymer ratio of 1:2 produced a retarding effect in simulated salivary fluid (pH 6.8 and were further used for formulation into ODTs after addition of suitable amounts of excipients such as superdisintegrant, diluent, sweetener and flavor of directly compressible grade. Conclusions Effective taste-masking was achieved for Itopride HCl by way of preparation of microspheres and ODTs of acceptable characteristics.

  17. Formulation and evaluation of microsphere based oro dispersible tablets of itopride hcl.

    Science.gov (United States)

    Shah, Sanjay; Madan, Sarika; Agrawal, Ss

    2012-09-03

    The purpose of the present work is to mask the intensely bitter taste of Itopride HCl and to formulate an Oro dispersible tablet (ODT) of the taste-masked drug by incorporation of microspheres in the tablets for use in specific populations viz. pediatrics, geriatrics and patients experiencing difficulty in swallowing. With this objective in mind, microspheres loaded with Itopride HCl were prepared by solvent evaporation method using acetone as solvent for pH-sensitive polymer, Eudragit EPO and light liquid paraffin as the encapsulating medium. The prepared microspheres were characterized with regard to yield, drug content, flow properties, particle size and size distribution, surface features, in vitro drug release and taste. The ODTs so prepared from these microspheres were evaluated for hardness, thickness, weight variation, friability, disintegration time, drug content, wetting time, water absorption ratio, moisture uptake, in vitro dispersion, in vitro disintegration, in vitro drug release and stability. The average size of microspheres was found to be satisfactory in terms of the size and size distribution. Microspheres prepared were of a regular spherical shape. Comparison of the dissolution profiles of microspheres in different pH media showed that microspheres having drug: polymer ratio of 1:2 produced a retarding effect in simulated salivary fluid (pH 6.8) and were further used for formulation into ODTs after addition of suitable amounts of excipients such as superdisintegrant, diluent, sweetener and flavor of directly compressible grade. Effective taste-masking was achieved for Itopride HCl by way of preparation of microspheres and ODTs of acceptable characteristics.

  18. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres

    International Nuclear Information System (INIS)

    Cao Feng; Li Dongxu

    2010-01-01

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe 3+ , which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 deg. C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  19. Biotemplate synthesis of monodispersed iron phosphate hollow microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Cao Feng; Li Dongxu, E-mail: dongxuli@njut.edu.c [College of Materials Science and Engineering, Nanjing University of Technology, Jiangsu Nanjing 210009 (China)

    2010-03-15

    Monodispersed iron phosphate hollow microspheres with a high degree of crystallization were prepared through a facile in situ deposition method using rape pollen grains as a biotemplate. The functional group on the surface of the pollen grains could adsorb Fe{sup 3+}, which provided the nucleation sites for growth of iron phosphate nanoparticles. After being sintered at 600 deg. C for 10 h, the pollen grains were removed and iron phosphate hollow microspheres were obtained. A scanning electron microscope and x-ray diffraction were applied to characterize the morphology and crystalline structure of the pollen grains, iron phosphate-coated pollen grains and iron phosphate hollow microspheres. Differential scanning calorimetry and thermogravity analyses were performed to investigate the thermal behavior of the iron phosphate-coated pollen grains during the calcinations. Energy dispersive spectroscopy and Fourier transform infrared spectroscopy were utilized to investigate the interaction between the pollen grains and iron phosphate. The effect of the pollen wall on the surface morphology of these iron phosphate hollow microspheres was also proven in this work.

  20. Electrodepositing of Au on hollow PS micro-spheres

    International Nuclear Information System (INIS)

    Sun Jingyuan; Zhang Yunwang; Du Kai; Wan Xiaobo; Xiao Jiang; Zhang Wei; Zhang Lin; Chen Jing

    2010-01-01

    Using the self-regulating new micro-sphere electrodepositing device, the techniques of electrodepositing gold on hollow PS micro-spheres were established. The experiment was carried out under the following conditions: voltage was about 0.7 ∼ 0.8 V, current density was 2.0 mA · cm -2 , the temperature was 45 degree C, cathode rotating rate was 250 r · min -1 , flow rate of the solution was 7 mL · min -1 · cm -2 . Hollow gold-plated micro-spheres were prepared with well spherical symmetry, uniform thickness and surface smoothness under 500 nm. The speed of the gold depositing was 6 μm · h -1 . (authors)

  1. Microspheres with Ultrahigh Holmium Content for Radioablation of Malignancies

    NARCIS (Netherlands)

    Bult, W.; Seevinck, P.R.; Krijger, G.C.; Visser, T.; Kroon-Batenburg, L.M.J.; Bakker, C.J.G.; Hennink, W.E.; van het Schip, A.D.; Nijsen, J.F.W.

    2009-01-01

    The aim of this study was to develop microspheres with an ultra high holmium content which can be neutron activated for radioablation of malignancies. These microspheres are proposed to be delivered selectively through either intratumoral injections into solid tumors or administered via an

  2. Eudragit-coated dextran microspheres of 5-fluorouracil for site-specific delivery to colon.

    Science.gov (United States)

    Rai, Gopal; Yadav, Awesh K; Jain, Narendra K; Agrawal, Govind P

    2016-01-01

    Objective of the present investigation was to prepare and evaluate the potential of enteric coated dextran microspheres for colon targeting of 5-fluorouracil (5-FU). Dextran microspheres were prepared by emulsification-crosslinking method and the formulation variables studied included different molecular weights of dextran, drug:polymer ratio, volume of crosslinking agent, stirring speed and time. Enteric coating (Eudragit S-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method using different coat:core ratios (4:1 or 8:1). Uncoated and coated dextran microspheres were characterized by particle size, surface morphology, entrapment efficiency, DSC, in vitro drug release in the presence of dextranase and 2% rat cecal contents. The release study of 5-FU from coated dextran microspheres was pH dependent. No release was observed at acidic pH; however, the drug was released quickly where Eudragit starts solublizing there was continuous release of drug from the microspheres. Organ distribution study was suggested that coated dextran microspheres retard the release of drug in gastric and intestinal pH environment and released of drug from microspheres in colon due to the degradation of dextran by colonic enzymes.

  3. Optical diffraction by ordered 2D arrays of silica microspheres

    International Nuclear Information System (INIS)

    Shcherbakov, A.A.; Shavdina, O.; Tishchenko, A.V.; Veillas, C.; Verrier, I.; Dellea, O.; Jourlin, Y.

    2017-01-01

    The article presents experimental and theoretical studies of angular dependent diffraction properties of 2D monolayer arrays of silica microspheres. High-quality large area defect-free monolayers of 1 μm diameter silica microspheres were deposited by the Langmuir-Blodgett technique under an accurate optical control. Measured angular dependencies of zeroth and one of the first order diffraction efficiencies produced by deposited samples were simulated by the rigorous Generalized Source Method taking into account particle size dispersion and lattice nonideality. - Highlights: • High quality silica microsphere monolayer was fabricated. • Accurate measurements of diffraction efficiency angular dependencies. • Rigorous diffraction simulation of both ideal hexagonal and realistic microsphere arrangements. • Qualitative rationalization of the obtained results and the observed differences between the experiment and the theory.

  4. Pharmacogenetics of Risperidone-Induced Insulin Resistance in Children and Adolescents with Autism Spectrum Disorder.

    Science.gov (United States)

    Sukasem, Chonlaphat; Vanwong, Natchaya; Srisawasdi, Pornpen; Ngamsamut, Nattawat; Nuntamool, Nopphadol; Hongkaew, Yaowaluck; Puangpetch, Apichaya; Chamkrachangpada, Bhunnada; Limsila, Penkhae

    2018-07-01

    The purpose of this study was to explore the association of genetic polymorphism of genes related to pharmacokinetics or pharmacodynamics with insulin resistance in children and adolescents with autism spectrum disorder (ASD) and treated with risperidone. All 89 subjects underwent measurement of fasting blood glucose and insulin levels, body-weight and height. Genotyping was performed by TaqMan real-time polymerase chain reaction (PCR) (pharmacokinetics genes: cytochrome P450 2D6 (CYP2D6) *4 (rs3892097), *5 (gene deletion), *10 (rs1065852) and *41 (rs28371725), ATP-binding cassette transporter B1 (ABCB1) 2677 G>T/A (rs2032582) and 3435C>T (rs1045642) and pharmacodynamics genes: dopamine receptor D2 (DRD2) Tag-SNP (C>T) (rs4436578), DRD2 Tag1A (C>T) (rs1800497), leptin gene (LEP) -2548G>A (rs7799039), ghrelin gene (GHRL) -604G>A (rs27647) and brain-derived neurotrophic factor (BDNF) 196G>A (rs6265)). Drug levels were analysed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). The results revealed that 5 (5.62%) patients presented with hyperglycaemia. Insulin resistance was detected in 15 (16.85%) patients. Insulin resistance was associated with LEP 2548 G>A and BDNF 196 G>A polymorphism (p = 0.051 and p = 0.03). There was no association of pharmacokinetic gene polymorphisms (CYP2D6 and ABCB1) and risperidone levels with insulin resistance. Multiple regression analysis indicated that BDNF 196 G>A polymorphism was significantly associated with insulin resistance (p = 0.025). This finding suggested that BDNF 196 G>A polymorphism may be a genetic marker for predicting insulin resistance before initiating treatment in patients treated with risperidone. Because of the small sample size, further studies are needed to confirm these results. © 2018 Nordic Association for the Publication of BCPT (former Nordic Pharmacological Society).

  5. Evaluation of the Thermosensitive Release Properties of Microspheres Containing an Agrochemical Compound.

    Science.gov (United States)

    Terada, Takatoshi; Ohtsubo, Toshiro; Iwao, Yasunori; Noguchi, Shuji; Itai, Shigeru

    2017-01-01

    The purpose of this study was to develop a deeper understanding of the key physicochemical parameters involved in the release profiles of microsphere-encapsulated agrochemicals at different temperatures. Microspheres consisting of different polyurethanes (PUs) were prepared using our previously reported solventless microencapsulation technique. Notably, these microspheres exhibited considerable differences in their thermodynamic characteristics, including their glass transition temperature (T g ), extrapolated onset temperature (T o ) and extrapolated end temperature (T e ). At test temperatures below the T o of the PU, only 5-10% of the agrochemical was rapidly released from the microspheres within 1 d, and none was released thereafter. However, at test temperatures above the T o of the PU, the rate of agrochemical release gradually increased with increasing temperatures, and the rate of release from the microspheres was dependent on the composition of the PU. Taken together, these results show that the release profiles of the microspheres were dependent on their thermodynamic characteristics and changes in their PU composition.

  6. Pharmacodynamics of diclofenac from novel Eudragit entrapped microspheres.

    Science.gov (United States)

    Momoh, M A; Kenechukwu, F C; Adedokun, M O; Odo, C E; Attama, A A

    2014-05-01

    Effective clinical utilization of non-steroidal anti-inflammatory drugs such as diclofenac sodium (DS) is significantly limited by their ulcerogenic potential and poor bioavailability after oral administration, thus necessitating the need for a better carrier to minimize these obvious limitations. The objective of this study was to evaluate Eudragit® RS100/RL100 microspheres formulated by the solvent-evaporation technique for improved delivery of diclofenac. Three batches of (DF1, DF2 and DF3) microspheres were prepared using different ratios of Eudragit RS-100 and RL-100 polymers based on the solvent-evaporation method. The microspheres were characterized based on morphological properties, particle size analysis and encapsulation efficiency (EE%). In vitro release of DS was investigated in both 0.1 N HCl (pH 1.2) and phosphate-buffered saline (pH 7.4), while anti-inflammatory studies were evaluated in the rat model. Maximum EE% of 86.61 ± 0.11, 88.14 ± 0.16 and 85.50 ± 0.21 was obtained for DF1, DF2 and DF3, respectively. Discrete, smooth and brownish microspheres of size range 437 ± 0.01-479 ± 0.21 µm were obtained. Release of DS from the formulation depends on the polymer ratio. All the batches exhibited good anti-inflammatory activities. Microsphere formulations based on Eudragit® polymers would likely offer a reliable and alternative means of delivering DS orally.

  7. Development and evaluation of floating microspheres of curcumin in ...

    African Journals Online (AJOL)

    Purpose: To prepare and evaluate floating microspheres of curcumin for prolonged gastric residence and to study their effect on alloxan-induced diabetic rats. Methods: Floating microsphere were prepared by emulsion-solvent diffusion method, using hydroxylpropyl methylcellulose, chitosan and Eudragit S 100 polymer in ...

  8. Microspheres with ultrahigh holmium content for radioablation of malignancies

    NARCIS (Netherlands)

    Bult, W; Seevinck, P R; Krijger, G C; Visser, T; Kroon-Batenburg, L M J; Bakker, C J G; Hennink, W E; van het Schip, A D; Nijsen, J F W

    PURPOSE: The aim of this study was to develop microspheres with an ultra high holmium content which can be neutron activated for radioablation of malignancies. These microspheres are proposed to be delivered selectively through either intratumoral injections into solid tumors or administered via an

  9. Microspheres with Ultrahigh Holmium Content for Radioablation of Malignancies

    NARCIS (Netherlands)

    Bult, W.; Seevinck, P.R.; Krijger, G.C.; Visser, T.; Kroon-Batenburg, L.M.J.; Bakker, C.J.G.; Hennink, W.E.; Van het Schip, A.D.; Nijsen, J.F.W.

    Purpose The aim of this study was to develop microspheres with an ultra high holmium content which can be neutron activated for radioablation of malignancies. These microspheres are proposed to be delivered selectively through either intratumoral injections into solid tumors or administered via an

  10. INVESTIGATION OF DRUG RELEASE FROM BIODEGRADABLE PLG MICROSPHERES: EXPERIMENT AND THEORY

    Energy Technology Data Exchange (ETDEWEB)

    ANDREWS, MALCOLM J. [Los Alamos National Laboratory; BERCHANE, NADER S. [Los Alamos National Laboratory; CARSON, KENNETH H. [Los Alamos National Laboratory; RICE-FICHT, ALLISON C. [Los Alamos National Laboratory

    2007-01-30

    Piroxicam containing PLG microspheres having different size distributions were fabricated, and in vitro release kinetics were determined for each preparation. Based on the experimental results, a suitable mathematical theory has been developed that incorporates the effect of microsphere size distribution and polymer degradation on drug release. We show from in vitro release experiments that microsphere size has a significant effect on drug release rate. The initial release rate decreased with an increase in microsphere size. In addition, the release profile changed from first order to concave-upward (sigmoidal) as the system size was increased. The mathematical model gave a good fit to the experimental release data.

  11. Method for selecting hollow microspheres for use in laser fusion targets

    Science.gov (United States)

    Farnum, Eugene H.; Fries, R. Jay; Havenhill, Jerry W.; Smith, Maurice Lee; Stoltz, Daniel L.

    1976-01-01

    Hollow microspheres having thin and very uniform wall thickness are useful as containers for the deuterium and tritium gas mixture used as a fuel in laser fusion targets. Hollow microspheres are commercially available; however, in commercial lots only a very small number meet the rigid requirements for use in laser fusion targets. Those meeting these requirements may be separated from the unsuitable ones by subjecting the commercial lot to size and density separations and then by subjecting those hollow microspheres thus separated to an external pressurization at which those which are aspherical or which have nonuniform walls are broken and separating the sound hollow microspheres from the broken ones.

  12. Effect of risperidone versus haloperidol on emotional responding in schizophrenic patients.

    Science.gov (United States)

    Fakra, E; Khalfa, S; Da Fonseca, D; Besnier, N; Delaveau, P; Azorin, J M; Blin, O

    2008-10-01

    Studies on emotional processing report that schizophrenic patients present a specific pattern of emotional responding that usually includes deficits in emotional expressiveness, increased feelings of unpleasant emotion but decreased feelings of pleasant emotion, and increased physiological reactivity. However, studies have rarely controlled the nature of antipsychotic medication. Yet, the influence of these drugs on emotional response is uncertain and could vary depending on their pharmacological profile. This prospective and randomized study aimed to compare the effects of an atypical antipsychotic, risperidone, to a typical one, haloperidol, on patients' emotional responding during an emotional induction task. Twenty-five schizophrenic patients underwent two emotional and clinical evaluations: one before treatment initiation and a second 4 weeks after. Emotional states of fear, sadness, anger, joy, and disgust were induced, as well as a neutral baseline state. Video recordings of patients during the induction task allowed for assessment of emotional expressiveness. Self-reports and measures of skin conductance and heart rate were performed to determine both subjective and physiological reactions to emotional experience. Compared to haloperidol, risperidone did not reduce patients' facial expressiveness, decreased physiological reactivity, and decreased experience of unpleasant emotion but maintained experience of pleasant emotion. Emotional expressiveness was negatively correlated to parkisonism. Our preliminary results suggest that atypical antipsychotics allow for better-adapted patterns of emotional responding than typical ones do. We suggest that this effect is due to reduced striatal D2 blockade, therefore, attenuating akinesia, coupled with increased 5HT and DA levels in prefrontal cortex, which improves emotional regulation.

  13. Modified composite microspheres of hydroxyapatite and poly(lactide-co-glycolide) as an injectable scaffold

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Xixue [BNLMS, State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, National Center for Nanoscience and Technology, Beijing 100190 (China); Shen, Hong, E-mail: shenhong516@iccas.ac.cn [BNLMS, State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Yang, Fei [BNLMS, State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Liang, Xinjie [CAS Key Laboratory for Biomedical Effects of Nanomaterials and Nanosafety, National Center for Nanoscience and Technology, Beijing 100190 (China); Wang, Shenguo, E-mail: wangsg@iccas.ac.cn [BNLMS, State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Wu, Decheng, E-mail: dcwu@iccas.ac.cn [BNLMS, State Key Laboratory of Polymer Physics and Chemistry, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190 (China)

    2014-02-15

    The compound of hydroxyapatite-poly(lactide-co-glycolide) (HA-PLGA) was prepared by ionic bond between HA and PLGA. HA-PLGA was more stable than the simple physical blend of hydroxyapatite and poly(lactide-co-glycolide) (HA/PLGA). The surface of HA-PLGA microsphere fabricated by an emulsion–solvent evaporation method was rougher than that of HA/PLGA microspheres. Moreover, surface HA content of HA-PLGA microspheres was more than that of HA/PLGA microspheres. In vitro mouse OCT-1 osteoblast-like cell culture results showed that the HA-PLGA microspheres clearly promoted osteoblast attachment, proliferation and alkaline phosphatase activity. It was considered that surface rich HA component and rough surface of HA-PLGA microsphere enhanced cell growth and differentiation. The good cell affinity of the HA-PLGA microspheres indicated that they could be used as an injectable scaffold for bone tissue engineering.

  14. Controlled Synthesis of Hierarchically Assembled Porous ZnO Microspheres with Enhanced Gas-Sensing Properties

    Directory of Open Access Journals (Sweden)

    Shengsheng You

    2015-01-01

    Full Text Available The ZnO microspheres constructed by porous nanosheets were successfully synthesized by calcinating zinc hydroxide carbonate (ZHC microspheres obtained by a sample hydrothermal method. The samples were characterized in detail with scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray diffraction (XRD, and thermogravimetric and differential scanning calorimetry (TG-DSC. The results indicated that the prepared ZnO microspheres were well crystalline with wurtzite hexagonal phase. The effects of reaction time, temperature, the amount of trisodium citrate, and urea on the morphology of ZnO microspheres were studied. The formation mechanism of porous ZnO microspheres was discussed. Furthermore, the gas-sensing properties for detection of organic gas of the prepared porous ZnO microspheres were investigated. The results indicated that the prepared porous ZnO microspheres exhibited high gas-sensing properties for detection of ethanol gas.

  15. Modified composite microspheres of hydroxyapatite and poly(lactide-co-glycolide) as an injectable scaffold

    International Nuclear Information System (INIS)

    Hu, Xixue; Shen, Hong; Yang, Fei; Liang, Xinjie; Wang, Shenguo; Wu, Decheng

    2014-01-01

    The compound of hydroxyapatite-poly(lactide-co-glycolide) (HA-PLGA) was prepared by ionic bond between HA and PLGA. HA-PLGA was more stable than the simple physical blend of hydroxyapatite and poly(lactide-co-glycolide) (HA/PLGA). The surface of HA-PLGA microsphere fabricated by an emulsion–solvent evaporation method was rougher than that of HA/PLGA microspheres. Moreover, surface HA content of HA-PLGA microspheres was more than that of HA/PLGA microspheres. In vitro mouse OCT-1 osteoblast-like cell culture results showed that the HA-PLGA microspheres clearly promoted osteoblast attachment, proliferation and alkaline phosphatase activity. It was considered that surface rich HA component and rough surface of HA-PLGA microsphere enhanced cell growth and differentiation. The good cell affinity of the HA-PLGA microspheres indicated that they could be used as an injectable scaffold for bone tissue engineering.

  16. Preparation of open porous polycaprolactone microspheres and their applications as effective cell carriers in hydrogel system

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Qingchun [Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering (China); Tan, Ke; Ye, Zhaoyang [State Key Laboratory of Bioreactor Engineering, School of Bioengineering, East China University of Science and Technology, Shanghai, 200237 China (China); Zhang, Yan, E-mail: zhang_yan@ecust.edu.cn [Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering (China); Tan, Wensong [State Key Laboratory of Bioreactor Engineering, School of Bioengineering, East China University of Science and Technology, Shanghai, 200237 China (China); Lang, Meidong, E-mail: mdlang@ecust.edu.cn [Key Laboratory for Ultrafine Materials of Ministry of Education, School of Materials Science and Engineering (China)

    2012-12-01

    Common hydrogel, composed of synthetic polymers or natural polysaccharides could not support the adhesion of anchorage-dependent cells due to the lack of cell affinitive interface and high cell constraint. The use of porous polyester microspheres as cell-carriers and introduction of cell-loaded microspheres into the hydrogel system might overcome the problem. However, the preparation of the open porous microsphere especially using polycaprolactone (PCL) has been rarely reported. Here, the open porous PCL microspheres were fabricated via the combined emulsion/solvent evaporation and particle leaching method. The microspheres exhibited porous surface and inter-connective pore structure. Additionally, the pore structure could be easily controlled by adjusting the processing parameters. The surface pore size could be altered from 20 {mu}m to 80 {mu}m and the internal porosities were varied from 30% to 70%. The obtained microspheres were evaluated to delivery mesenchymal stem cells (MSCs) and showed the improved cell adhesion and growth when compared with the non-porous microspheres. Then, the MSCs loaded microspheres were introduced into agarose hydrogel. MSCs remained alive and sustained proliferation in microsphere/agarose composite in 5-day incubation while a decrement of MSCs viabilities was found in agarose hydrogel without microspheres. The results indicated that the microsphere/hydrogel composite had a great potential in cell therapy and injectable system for tissue regeneration. Highlights: Black-Right-Pointing-Pointer The open porous polycaprolactone microspheres were fabricated using paraffin as a porogen. Black-Right-Pointing-Pointer The microspheres exhibited porous surface and inter-connective pore structure. Black-Right-Pointing-Pointer The surface and internal pore size and porosity of microsphere could be controlled. Black-Right-Pointing-Pointer The porous microspheres exhibited an improved cell adhesion and proliferation. Black

  17. [Optimization of riboflavin sodium phosphate loading to calcium alginate floating microspheres by response surface methodology].

    Science.gov (United States)

    Zhang, An-yang; Fan, Tian-yuan

    2009-12-18

    To investigate the preparation, optimization and in vitro properties of riboflavin sodium phosphate floating microspheres. The floating microspheres composed of riboflavin sodium phosphate and calcium alginate were prepared using ion gelatin-oven drying method. The properties of the microspheres were investigated, including the buoyancy, release, appearance and entrapment efficiency. The formulation was optimized by response surface methodology (RSM). The optimized microspheres were round. The entrapment efficiency was 57.49%. All the microspheres could float on the artificial gastric juice over 8 hours. The release of the drug from the microspheres complied with Fick's diffusion.

  18. BIOCOMPATIBLE FLUORESCENT MICROSPHERES: SAFE PARTICLES FOR MATERIAL PENETRATION STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    farquar, G; Leif, R

    2008-09-12

    Biocompatible polymers with hydrolyzable chemical bonds are being used to produce safe, non-toxic fluorescent microspheres for material penetration studies. The selection of polymeric materials depends on both biocompatibility and processability, with tailored fluorescent properties depending on specific applications. Microspheres are composed of USFDA-approved biodegradable polymers and non-toxic fluorophores and are therefore suitable for tests where human exposure is possible. Micropheres are being produced which contain unique fluorophores to enable discrimination from background aerosol particles. Characteristics that affect dispersion and adhesion can be modified depending on use. Several different microsphere preparation methods are possible, including the use of a vibrating orifice aerosol generator (VOAG), a Sono-Tek atomizer, an emulsion technique, and inkjet printhead. The advantages and disadvantages of each method will be presented and discussed in greater detail along with fluorescent and charge properties of the aerosols. Applications for the fluorescent microspheres include challenges for biodefense system testing, calibrants for biofluorescence sensors, and particles for air dispersion model validation studies.

  19. Covalently coating dextran on macroporous polyglycidyl methacrylate microsphere enabled rapid protein chromatographic separation

    International Nuclear Information System (INIS)

    Zhang, Rongyue; Li, Qiang; Li, Juan; Zhou, Weiqing; Ye, Peili; Gao, Yang; Ma, Guanghui; Su, Zhiguo

    2012-01-01

    Protein denaturation and nonspecific adsorption on polymer media as a chromatographic support have been a problem which needs to be overcome. Macroporous poly(glycidyl methacrylate–divinylbezene) (PGMA–DVB) microspheres prepared in this study were firstly covalently coated with dextran through a three-step method. The dextran was firstly adsorbed onto the microspheres and then covalently bound to the PGMA–DVB microsphere through ether bonds which were formed by hydroxyl group reacting with epoxy group at the presence of 4-(Dimethylamino) pyridine. Finally, the coating dextran layer was crosslinked by ethylene glycol diglycidyl ether to form the continuous network coating. The coated microspheres were characterized by Fourier transform infrared spectra, scanning electron microscope, mercury porosimetry measurements, laser scanning confocal microscope, and protein adsorption experiments. Results showed that PGMA–DVB microspheres coated with dextran successfully maintained the macroporous structure and high permeability. The backpressure was only 1.69 MPa at a high flow rate of 2891 cm/h. Consequently, the hydrophilicity and biocompatibility of modified microspheres were greatly improved, and the contact angle decreased from 184° to 13°, and nonspecific adsorption of proteins was decreased to little or none. The clad dextran coating with large amounts of hydroxyl group was easily derived to be various functional groups. The derived media have great potential applications in rapid protein chromatography. - Highlights: ► Macroporous PGMA–DVB microspheres were covalently coated with dextran. ► The hydrophilicity of the coated microspheres was significantly improved. ► The irreversible adsorption of proteins was reduced to zero. ► The coated microspheres can maintain the macropore structure. ► The coated microspheres were applied to rapid protein separation.

  20. Disposition kinetics of long acting moxifloxacin following intravenous administration in Sheep

    Directory of Open Access Journals (Sweden)

    Chirag M. Modi

    Full Text Available Aim: The objective of the present study was to study the disposition kinetics and dosage regimens of long acting moxifloxacin following intravenous administration at the dose rate of 7.5 mg/kg-1 b. wt. in six male sheep and to calculate dosage regimens of the same in sheep. Materials and Methods: The study was conducted using six healthy male sheep. Long acting Moxifloxacin solution (10 % moxifloxacin in solution with L- arginine, N-butyl alcohol and benzyl alcohol was injected in jugular vein and periodical blood samples were collected from contra-lateral jugular vein in test tubes containing 30-50 IU heparin (anticoagulant at 0.083 (5 min, 0.166 (10 min, 0.5, 1, 2, 4, 8, 12, 24, 36, 48, 60, 72 and up to 96 h post administration of drug. Drug concentration in plasma was determined using High Performance Liquid Chromatography (HPLC with Fluorescence Detector. The blood concentrations versus time data were analyzed using software. Results: After single dose intravenous administration of long acting moxifloxacin the plasma concentration of 0.016 ± 0.001 μg/ml-1 was maintained for up to 72 h. Distribution half-life (t and elimination half-life (t were 1.637 ± 0.053 h, and 1/2 1/2 12.130 ± 0.202 h, following IV administration. The mean values of apparent volume of distribution V 5.436 ± 0.135 L/kg-1 d(area as well as mean residence time 10.02 ± 4.787 minute were detected with IV administration. Conclusion: The long acting Moxifloxacin @ the dose 7.5 mg/kg IV maintains the effective therapeutic concentration in the plasma of sheep for up to 72 hours. The long acting Moxifloxacin at this dose rate can be used to treat sensitive bacteria causing infectious diseases in sheep. [Vet World 2012; 5(9.000: 517-521

  1. A novel approach to preparing magnetic protein microspheres with core-shell structure

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Wei, E-mail: climentjw@126.co [National Special Superfine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094 (China); Sun Zhendong; Li Fengsheng [National Special Superfine Powder Engineering Research Center, Nanjing University of Science and Technology, Nanjing 210094 (China); Chen Kai; Liu Tianyu; Liu Jialing [Department of Physics, Nanjing University of Science and Technology, Nanjing 210094 (China); Zhou Tianle [Department of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China); Guo Rui [Department of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094 (China)

    2011-03-15

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe{sub 3}O{sub 4} cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe{sub 3}O{sub 4} nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail. - Research Highlights: Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe{sub 3}O{sub 4} cores and coated with globular bovine serum albumin (BSA). 57.8 wt% of approximately 10 nm superparamagnetic Fe{sub 3}O{sub 4} nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides the abundant functional groups.

  2. A novel approach to preparing magnetic protein microspheres with core-shell structure

    International Nuclear Information System (INIS)

    Jiang Wei; Sun Zhendong; Li Fengsheng; Chen Kai; Liu Tianyu; Liu Jialing; Zhou Tianle; Guo Rui

    2011-01-01

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3 O 4 cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe 3 O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail. - Research Highlights: → Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method.→ The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3 O 4 cores and coated with globular bovine serum albumin (BSA).→ 57.8 wt% of approximately 10 nm superparamagnetic Fe 3 O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides the abundant functional groups.

  3. Occupational radiation exposure of medical staff performing 90Y-loaded microsphere radioembolization

    International Nuclear Information System (INIS)

    Laffont, Sophie; Ardisson, Valerie; Lenoir, Laurence; Rolland, Yan; Rohou, Tanguy; Edeline, Julien; Pracht, Marc; Sourd, Samuel Le; Lepareur, Nicolas; Garin, Etienne

    2016-01-01

    Radioembolization of liver cancer with 90 Y-loaded microspheres is increasingly used but data regarding hospital staff exposure are scarce. We evaluated the radiation exposure of medical staff while preparing and injecting 90 Y-loaded glass and resin microspheres especially in view of the increasing use of these products. Exposure of the chest and finger of the radiopharmacist, nuclear medicine physician and interventional radiologist during preparation and injection of 78 glass microsphere preparations and 16 resin microsphere preparations was monitored. Electronic dosimeters were used to measure chest exposure and ring dosimeters were used to measure finger exposure. Chest exposure was very low for both products used (<10 μSv from preparation and injection). In our experience, finger exposure was significantly lower than the annual limit of 500 mSv for both products. With glass microspheres, the mean finger exposure was 13.7 ± 5.2 μSv/GBq for the radiopharmacist, and initially 17.9 ± 5.4 μSv/GBq for the nuclear medicine physician reducing to 13.97 ± 7.9 μSv/GBq with increasing experience. With resin microspheres, finger exposure was more significant: mean finger exposure for the radiopharmacist was 295.1 ± 271.9 μSv/GBq but with a reduction with increasing experience to 97.5 ± 35.2 μSv/GBq for the six most recent dose preparations. For administration of resin microspheres, the greatest mean finger exposure for the nuclear medicine physician (the most exposed operator) was 235.5 ± 156 μSv/GBq. Medical staff performing 90 Y-loaded microsphere radioembolization procedures are exposed to safe levels of radiation. Exposure is lower than that from treatments using 131 I-lipiodol. The lowest finger exposure is from glass microspheres. With resin microspheres finger exposure is acceptable but could be optimized in accordance with the ALARA principle, and especially in view of the increasing use of radioembolization. (orig.)

  4. Ziprasidone versus olanzapine, risperidone or quetiapine in patients with chronic schizophrenia: a 12-week open-label, multicentre clinical trial

    DEFF Research Database (Denmark)

    Lublin, Henrik; Haug, Hans-Joachim; Koponen, Hannu

    2009-01-01

    The efficacy, safety and tolerability of ziprasidone versus the comparators olanzapine, risperidone or quetiapine were investigated in adult patients with chronic schizophrenia, schizoaffective and schizophreniform disorders, with lack of efficacy or intolerance to their previous antipsychotic tr...

  5. Porous-wall hollow glass microspheres as carriers for biomolecules

    Science.gov (United States)

    Li, Shuyi; Dynan, William S; Wicks, George; Serkiz, Steven

    2013-09-17

    The present invention includes compositions of porous-wall hollow glass microspheres and one or more biomolecules, wherein the one or more biomolecules are positioned within a void location within the hollow glass microsphere, and the use of such compositions for the diagnostic and/or therapeutic delivery of biomolecules.

  6. Carboxyl-Functionalized Polymeric Microspheres Prepared by One-Stage Photoinitiated RAFT Dispersion Polymerization

    Directory of Open Access Journals (Sweden)

    Jianbo Tan

    2017-12-01

    Full Text Available Herein, we report a photoinitiated reversible addition-fragmentation chain transfer (RAFT dispersion copolymerization of methyl methacrylate (MMA and methyl methacrylic (MAA for the preparation of highly monodisperse carboxyl-functionalized polymeric microspheres. High rates of polymerization were observed, with more than 90% particle yields being achieved within 3 h of UV irradiation. Effects of reaction parameters (e.g., MAA concentration, RAFT agent concentration, photoinitiator concentration, and solvent composition were studied in detail, and highly monodisperse polymeric microspheres were obtained in most cases. Finally, silver (Ag composite microspheres were prepared by in situ reduction of AgNO3 using the carboxyl-functionalized polymeric microspheres as the template. The obtained Ag composite microspheres were able to catalyze the reduction of methylene blue (MB with NaBH4 as a reductant.

  7. Preparation of berbamine loaded chitosan-agarose microspheres and in vitro release study

    Directory of Open Access Journals (Sweden)

    Zhang Hu

    2012-01-01

    Full Text Available Berbamine loaded chitosan-agarose microspheres were prepared using a water-in-oil emulsion technique. Optimum preparing parameters were determined by orthogonal experiments as follows: ratio of berbamine to chitosan (w/w is 1:10; percentage of emulsifier (span 80, v/v is 6%; volume of glutaraldehyde is 2 mL; and reaction temperature is 70 ºC. Under these optimal conditions, the encapsulation efficiency and loading capacity of microspheres are 84.57% and 8.44%, respectively. The swelling tests showed that the microspheres possessed higher swelling ratio at pH 7.4 than at pH 1.2. FTIR indicated that berbamine had been successfully loaded in the chitosan-agarose microspheres by physical entrapment. In vitro release studies showed that berbamine was released from microspheres in a significantly sustained fashion.

  8. Application of a disease-specific mapping function to estimate utility gains with effective treatment of schizophrenia

    Directory of Open Access Journals (Sweden)

    Rupnow Marcia FT

    2005-09-01

    Full Text Available Abstract Background Most tools for estimating utilities use clinical trial data from general health status models, such as the 36-Item Short-Form Health Survey (SF-36. A disease-specific model may be more appropriate. The objective of this study was to apply a disease-specific utility mapping function for schizophrenia to data from a large, 1-year, open-label study of long-acting risperidone and to compare its performance with an SF-36-based utility mapping function. Methods Patients with schizophrenia or schizoaffective disorder by DSM-IV criteria received 25, 50, or 75 mg long-acting risperidone every 2 weeks for 12 months. The Positive and Negative Syndrome Scale (PANSS and SF-36 were used to assess efficacy and health-related quality of life. Movement disorder severity was measured using the Extrapyramidal Symptom Rating Scale (ESRS; data concerning other common adverse effects (orthostatic hypotension, weight gain were collected. Transforms were applied to estimate utilities. Results A total of 474 patients completed the study. Long-acting risperidone treatment was associated with a utility gain of 0.051 using the disease-specific function. The estimated gain using an SF-36-based mapping function was smaller: 0.0285. Estimates of gains were only weakly correlated (r = 0.2. Because of differences in scaling and variance, the requisite sample size for a randomized trial to confirm observed effects is much smaller for the disease-specific mapping function (156 versus 672 total subjects. Conclusion Application of a disease-specific mapping function was feasible. Differences in scaling and precision suggest the clinically based mapping function has greater power than the SF-36-based measure to detect differences in utility.

  9. Mucoadhesive microspheres: a promising tool in drug delivery.

    Science.gov (United States)

    Patil, Sanjay B; Sawant, Krutika K

    2008-10-01

    Mucoadhesive polymers have recently gained interest among pharmaceutical scientists as a means of improving drug delivery by promoting the residence time and contact time of the dosage form with the mucous membranes. Mucoadhesion is the process whereby synthetic and natural polymers adhere to mucosal surfaces in the body. If these materials are then incorporated into pharmaceutical formulations, drug absorption by mucosal cells may be enhanced or the drug will be released at the site for an extended period of time. Microspheres, in general, have the potential to be used for targeted and controlled release drug delivery; however, coupling of mucoadhesive properties to microspheres has additional advantages like, a much more intimate contact with the mucus layer, efficient absorption and enhanced bioavailability of the drugs due to a high surface to volume ratio. The present review describes the potential applications of mucoadhesive microspheres as a novel carrier system to improve drug delivery by various routes of administration like buccal, oral, nasal, ocular, vaginal and rectal, either for systemic or for local effects. The mucoadhesive polymers, methods of preparation of microspheres and their in vitro and in vivo evaluation are also described.

  10. Preparation of surface modified TiO2/rGO microspheres and application in the photocatalytic decomposition of oleic acid

    Science.gov (United States)

    Wu, Xin; Zeng, Min; Tong, Xiaoling; Li, Fuyun; Xu, Youyou

    2018-05-01

    The comprehensive utilization of waste cooking oil is an important research topic in food science. In this study, the surface modified mesoporous anatase TiO2/reduced graphene oxide (rGO) microspheres with a high specific surface area have been successfully synthesized, through hydrothermal routes and hydrazine reduced graphene oxide. The photocatalytic decomposition of waste rapeseed oil has also been studied using TiO2/rGO microspheres as photocatalyst. The result shows that the reduced graphene oxide in these nanocomposites can act as adsorbent and photocatalyst, and the temperature and the oxygen amount also are the most important factors affecting the oleic acid decomposition products. There interesting results not only helpful for the study of the mechanism of photocatalytic, but also useful for the rational use of waste cooking oil.

  11. Development of nuclear fuel microsphere handling techniques and equipment

    International Nuclear Information System (INIS)

    Mack, J.E.; Suchomel, R.R.; Angelini, P.

    1979-01-01

    Considerable progress has been made in the development of microsphere handling techniques and equipment for nuclear applications. Work at Oak Ridge National Laboratory with microspherical fuel forms dates back to the early sixties with the development of the sol-gel process. Since that time a number of equipment items and systems specifically related to microsphere handling and characterization have been identified and developed for eventual application in a remote recycle facility. These include positive and negative pressure transfer systems, samplers, weighers, a blender-dispenser, and automated devices for particle size distribution and crushing strength analysis. The current status of these and other components and systems is discussed

  12. Comparison of risperidone and aripiprazole in the treatment of preschool children with disruptive behavior disorder and attention deficit-hyperactivity disorder: A randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Parvin Safavi

    2016-01-01

    Full Text Available Although pharmacotherapy with atypical antipsychotics is common in child psychiatry, there has been little research on this issue. To compare the efficacy and safety of risperidone and aripiprazole in the treatment of preschool children with disruptive behavior disorders comorbid with attention deficit-hyperactivity disorder (ADHD. Randomized clinical trial conducted in a university-affiliated child psychiatry clinic in southwest Iran. Forty 3-6-year-old children, diagnosed with oppositional defiant disorder comorbid with ADHD, were randomized to an 8-week trial of treatment with risperidone or aripiprazole (20 patients in each group. Assessment was performed by Conners′ rating scale-revised and clinical global impressions scale, before treatment, and at weeks 2, 4, and 8 of treatment. The data were analyzed by SPSS version 16. Mean scores between the two groups were compared by analysis of variance and independent and paired t-test. Mean scores of Conners rating scales were not different between two groups in any steps of evaluation. Both groups had significantly reduced scores in week 2 of treatment (P = 0.00, with no significant change in subsequent measurements. Rates of improvement, mean increase in weight (P = 0.894, and mean change in fasting blood sugar (P = 0.671 were not significantly different between two groups. Mean serum prolactin showed a significant increase in risperidone group (P = 0.00. Both risperidone and aripiprazole were equally effective in reducing symptoms of ADHD and oppositional defiant disorder, and relatively safe, but high rates of side effects suggest the cautious use of these drugs in children.

  13. A case report of schizoaffective disorder with ritualistic behaviors and catatonic stupor: successful treatment by risperidone and modified electroconvulsive therapy.

    Science.gov (United States)

    Bai, Yuanhan; Yang, Xi; Zeng, Zhiqiang; Yang, Haichen

    2018-03-13

    Ritualistic behaviors are common in obsessive compulsive disorder (OCD), while catatonic stupor occasionally occurs in psychotic or mood disorders. Schizoaffective disorder is a specific mental disorder involving both psychotic and affective symptoms. The syndrome usually represents a specific diagnosis, as in the case of the 10th edition of the International Classification of Diseases (ICD-10) or the 5th edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5). However, symptom-based diagnosis can result in misdiagnosis and hinder effective treatment. Few cases of ritualistic behaviors and catatonic stupor associated with schizoaffective disorder have been reported. Risperidone and modified electroconvulsive therapy (MECT) were effective in our case. A 35-year-old man with schizoaffective disorder-depression was admitted to the hospital because of ritualistic behaviors, depression, and distrust. At the time of admission, prominent ritualistic behaviors and depression misled us to make the diagnosis of OCD. Sertraline add-on treatment exacerbated the psychotic symptoms, such as pressure of thoughts and delusion of control. In the presence of obvious psychotic symptoms and depression, schizoaffective disorder-depression was diagnosed according to ICD-10. Meanwhile, the patient unfortunately developed catatonic stupor and respiratory infection, which was identified by respiratory symptoms, blood tests, and a chest X-ray. To treat psychotic symptoms, catatonic stupor, and respiratory infection, risperidone, MECT, and ceftriaxone were administered. As a result, we successfully cured the patient with the abovementioned treatment strategies. Eventually, the patient was diagnosed with schizoaffective disorder-depression with ritualistic behaviors and catatonia. Risperidone and MECT therapies were dramatically effective. Making a differential diagnosis of mental disorders is a key step in treating disease. Sertraline was not recommended for treating

  14. Research progress of fabricating polyvinyl alcohol coating on plastic microsphere

    International Nuclear Information System (INIS)

    Su Lin; Chen Sufen; Liu Meifang; Zhang Zhanwen; Yao Hong; Li Bo; Liu Yiyang

    2012-01-01

    In the procedures of designing polystyrene-polyvinyl alcohol-CH (carbon and hydrogen elements) (PS-PVA-CH) triple-layer microspheres, there are many methods such as drop-tower technique, emulsion micro-encapsulation, dip (spin) coating, interfacial polycondensation, and spraying technique to prepare the PVA coating. Drop-tower technique, emulsion micro-encapsulation and dip (spin) coating are most-commonly used. The advantages, disadvantages and the research progress of the three methods are summarized in this paper. Emulsion micro-encapsulation is suitable for preparing double-layer microspheres of sizes smaller then 500 μm, with high survival ratio and good quality. However, the preparation process is easily influenced by artificial factors. Small-sized double-layer microspheres can also be prepared by the drop-tower technique, and the preparation period is short. But there are still some problems such as the difficulty in designing the droplet generator, uneven PVA coating and the difficulty in preparing large-sized microspheres. Dip (spin) coating technique can be used to prepare PS-PVA microspheres with sizes larger than 1000 μm, but the spread of PVA coating is affected by many factors in this method, and the prepared PVA coating is too thin and not uniform. (authors)

  15. Effect of gamma-irradiation on biodegradable microspheres loaded with rasagiline mesylate

    International Nuclear Information System (INIS)

    Fernandez, Marcos; Barcia, Emilia; Negro, Sofia

    2016-01-01

    In the present study, the influence of gamma-irradiation was evaluated on the physicochemical characteristics and in vitro release of rasagiline mesylate (RM), a selective MAO-B inhibitor used in Parkinson's disease, from poly(D,L-lactide-co-glycolide) (PLGA) microspheres. Microspheres were prepared using PLGA 50:50 by the solvent evaporation technique (O/W emulsion). Microspheres were sterilized by gamma-irradiation and their influence was assessed by scanning electron microscopy (SEM), laser light diffraction, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gel permeation chromatography (GPC), encapsulation efficiency (EE) and in vitro drug release. Gamma-irradiation of RM-loaded microspheres did not affect EE, DSC and XRD patterns. After gamma-irradiation, changes on the surface were observed by SEM, but no significant difference in mean particle size was observed. GPC measurements showed a decrease in molecular weight of the polymer after five days of in vitro release. The similarity factor value between irradiated and non-irradiates microspheres was <50, indicating the non-similarity of the release profiles. The sterilization technique had an effect on the integrity of polymeric system, significantly affecting in vitro release of RM from PLGA microspheres. Therefore, from our results we conclude that gamma-irradiation is not a suitable sterilization procedure for this formulation

  16. Covalently coating dextran on macroporous polyglycidyl methacrylate microsphere enabled rapid protein chromatographic separation

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Rongyue; Li, Qiang; Li, Juan; Zhou, Weiqing; Ye, Peili; Gao, Yang; Ma, Guanghui, E-mail: ghma@home.ipe.ac.cn; Su, Zhiguo

    2012-12-01

    Protein denaturation and nonspecific adsorption on polymer media as a chromatographic support have been a problem which needs to be overcome. Macroporous poly(glycidyl methacrylate-divinylbezene) (PGMA-DVB) microspheres prepared in this study were firstly covalently coated with dextran through a three-step method. The dextran was firstly adsorbed onto the microspheres and then covalently bound to the PGMA-DVB microsphere through ether bonds which were formed by hydroxyl group reacting with epoxy group at the presence of 4-(Dimethylamino) pyridine. Finally, the coating dextran layer was crosslinked by ethylene glycol diglycidyl ether to form the continuous network coating. The coated microspheres were characterized by Fourier transform infrared spectra, scanning electron microscope, mercury porosimetry measurements, laser scanning confocal microscope, and protein adsorption experiments. Results showed that PGMA-DVB microspheres coated with dextran successfully maintained the macroporous structure and high permeability. The backpressure was only 1.69 MPa at a high flow rate of 2891 cm/h. Consequently, the hydrophilicity and biocompatibility of modified microspheres were greatly improved, and the contact angle decreased from 184 Degree-Sign to 13 Degree-Sign , and nonspecific adsorption of proteins was decreased to little or none. The clad dextran coating with large amounts of hydroxyl group was easily derived to be various functional groups. The derived media have great potential applications in rapid protein chromatography. - Highlights: Black-Right-Pointing-Pointer Macroporous PGMA-DVB microspheres were covalently coated with dextran. Black-Right-Pointing-Pointer The hydrophilicity of the coated microspheres was significantly improved. Black-Right-Pointing-Pointer The irreversible adsorption of proteins was reduced to zero. Black-Right-Pointing-Pointer The coated microspheres can maintain the macropore structure. Black-Right-Pointing-Pointer The coated microspheres

  17. A microsphere suspension model of metamaterial fluids

    Directory of Open Access Journals (Sweden)

    Qian Duan

    2017-05-01

    Full Text Available Drawing an analogy to the liquid phase of natural materials, we theoretically propose a microsphere suspension model to realize a metamaterial fluid with artificial electromagnetic indexes. By immersing high-ε, micrometer-sized dielectric spheres in a low-ε insulating oil, the structured fluid exhibits liquid-like properties from dispersing phase as well as the isotropic negative electromagnetic parameters caused by Mie resonances from dispersed microspheres. The work presented here will benefit the development of structured fluids toward metamaterials.

  18. Cephradin-plaga microspheres for sustained delivery to cattle.

    Science.gov (United States)

    Ustariz-Peyret, C; Coudane, J; Vert, M; Kaltsatos, V; Boisramé, B

    1999-01-01

    In the field of controlled drug delivery, most of the reported work is aimed at introducing new systems, or at providing basic information on the critical parameters which affect release profiles in vitro and occasionally in vivo. The situation is totally different when one wants to fulfil the specific requirements imposed by the marketing of a sustained release device to be used in humans or in animals eaten by human beings. The control of the release characteristics is then a difficult challenge. In this work, attempts were made to combine cephradin, a hydrophilic beta-lactam antibiotic, and bioresorbable polymeric matrices of a poly(alpha-hydroxy acid) in the form of microspheres with the aim of delivering the antibiotic to cattle at a dose rate of 4-5 mg/kg/day over a 3-4 days period after i.m. injection. PLAGA aliphatic polyesters were selected because they are already FDA approved as matrices. The solvent evaporation technique using PVA as the emulsion stabilizer was selected because it is efficient and can be extended to an industrial scale. Various experimental conditions were used in order to obtain the highest encapsulation yields compatible with the desired specifications. Decreasing the volume of the aqueous phase and adding a water-miscible organic solvent/non-solvent of cephradin failed. In contrast, microspheres containing up to 30% cephradin were prepared after addition of sodium chloride to the aqueous dispersing phase. The amount of entrapped drug was raised to 40% by decreasing the temperature and the pressure. Preliminary investigations using dogs showed that 20% cephradin microspheres prepared under these conditions extended the presence of cephradin in the blood circulation up to 48 h. Increasing the load led to higher blood concentrations but shorter sustained release. The fact that the microspheres were for cattle limited the volume of the injection and thus the amount of microspheres to be administered. The other limiting factors were

  19. Iron Nanoparticles-Encapsulating Silica Microspheres for Arterial Embolization Hyperthermia

    Energy Technology Data Exchange (ETDEWEB)

    Li, Z; Kawashita, M, E-mail: zhixia@ecei.tohoku.ac.jp [Graduate School of Biomedical Engineering, Tohoku University (Japan)

    2011-10-29

    We attempted to prepare {alpha}-Fe-encapsulating silica ({alpha}FeSi) microspheres by a sol-gel process using tetramethoxysilane (TMOS) in water-in-oil emulsion. The effect of preparation conditions on the structure, magnetic and heating properties of resultant products were investigated. Oil phase consisted of kerosene with 32 wt% of surfactants (sorbitan monooleate / sorbitan monostearate in 3:1 weight ratio). Water phase consisted of TMOS, ethanol (CH{sub 2}CH{sub 3}OH), water and iron nitrate (Fe(NO{sub 3}){sub 3{center_dot}}9H{sub 2}O) with TMOS / CH{sub 2}CH{sub 3}OH/H{sub 2}O/Fe{sup 3+} in 1:7.4:16.2:0.4{approx}1.2 molar ratio. Fe{sup 3+}-containing silica gel (FeSiG) microspheres 5 to 30 {mu}m in size were successfully obtained by adding the water phase into the oil phase at 60 deg. C under stirring of 1500 rpm for 100 min. {alpha}FeSi microspheres was obtained by heating the FeSiG microspheres at 850deg. C in argon atmosphere. The obtained {alpha}FeSi microspheres have a saturation magnetization (Ms) up to 21 emu g{sup -1} and a coercive force (Hc) of 133 Oe. The in vitro heating generation was evaluated under an alternating current (AC) magnetic field of 300 Oe and 100 kHz.

  20. Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of Gelatin/Chitosan/Nanohydroxyapatite Microspheres

    Directory of Open Access Journals (Sweden)

    S. Bagheri-Khoulenjani

    2010-12-01

    Full Text Available The effects of chitosan/biopolymer (C/P and nanohydroxyapatite/ biopolymer (nHA/P weight ratios on particle size and its uniformity, cross-linking density and NH2 content of nano-hydroxyapatite/chitosan/gelatin (nHA/C/G microspheres were investigated. Microspheres were fabricated using water-in-oil emulsion. Cross-linking of microspheres was performed using water soluble carbodiimide. Particle size and its uniformity were evaluated using an optical microscope. The morphology of microspheres was studied by scanning electron microscopy. The obtained data from particle size measurements revealed that increments in C/P ratio increased the particle size while reducing its uniformity, and increased the NH2 content and cross linking density of the microspheres. It was shown that incremental increase in nHA/P ratio increased the particle size and its uniformity and reduced the NH2 content and cross-linking density of the microspheres.Morphological studies showed that the fabricated microspheres had spherical shape in medium level of C/P ratio and nHA/P ratio. However, increasing in chitosan/biopolymer ratio induced some micro-cracks into the structure of microspheres.

  1. Toward quantum-limited position measurements using optically levitated microspheres

    International Nuclear Information System (INIS)

    Libbrecht, Kenneth G.; Black, Eric D.

    2004-01-01

    We propose the use of optically levitated microspheres as test masses in experiments aimed at reaching and potentially exceeding the standard quantum limit for position measurements. Optically levitated microspheres have low mass and are essentially free of suspension thermal noise, making them well suited for experimentally testing our understanding of quantum-limited measurements

  2. Toward quantum-limited position measurements using optically levitated microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Libbrecht, Kenneth G.; Black, Eric D

    2004-01-26

    We propose the use of optically levitated microspheres as test masses in experiments aimed at reaching and potentially exceeding the standard quantum limit for position measurements. Optically levitated microspheres have low mass and are essentially free of suspension thermal noise, making them well suited for experimentally testing our understanding of quantum-limited measurements.

  3. Synthesis and characterization of magnesium gluconate contained poly(lactic-co-glycolic acid)/chitosan microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Shekh M. [Department of Chemical, Biological and Bioengineering, North Carolina A& T State University, 1601 East Market Street, Greensboro, NC 27411 (United States); NSF Engineering Research Center for Revolutionizing Metallic Biomaterials, North Carolina A& T State University, Greensboro, NC 27411 (United States); Mahoney, Christopher [Department of Bioengineering, University of Pittsburgh, 4200 Fifth Avenue, Pittsburgh, PA 15250 (United States); Sankar, Jagannathan [NSF Engineering Research Center for Revolutionizing Metallic Biomaterials, North Carolina A& T State University, Greensboro, NC 27411 (United States); Department of Mechanical Engineering, North Carolina A& T State University, 1601 East Market Street, Greensboro, NC 27411 (United States); Marra, Kacey G. [NSF Engineering Research Center for Revolutionizing Metallic Biomaterials, North Carolina A& T State University, Greensboro, NC 27411 (United States); Department of Bioengineering, University of Pittsburgh, 4200 Fifth Avenue, Pittsburgh, PA 15250 (United States); Department of Plastic Surgery, University of Pittsburgh, 200 Lothrop Street, Pittsburgh, PA 15250 (United States); McGowan Institute for Regenerative Medicine, University of Pittsburgh, 450 Technology Drive, Pittsburgh, PA 15250 (United States); Bhattarai, Narayan, E-mail: nbhattar@ncat.edu [Department of Chemical, Biological and Bioengineering, North Carolina A& T State University, 1601 East Market Street, Greensboro, NC 27411 (United States); NSF Engineering Research Center for Revolutionizing Metallic Biomaterials, North Carolina A& T State University, Greensboro, NC 27411 (United States)

    2016-01-15

    Graphical abstract: - Highlights: • Magnesium gluconate contained PLGA/chitosan microspheres were fabricated. • In vitro release of magnesium ions was performed using Xylidyl Blue assay. • Chitosan coated PLGA can significantly control the release of magnesium ions. • Cellular compatibility was tested using adipose-derived stem cells and PC12 cells. • The cells encounter acceptably low levels of damage in contact with microspheres. - Abstract: The goal of this study was to fabricate and investigate the chitosan coated poly(lactic-co-glycolic acid) (PLGA) microspheres for the development of controlled release magnesium delivery system. PLGA based microspheres are ideal vehicles for many controlled release drug delivery applications. Chitosan is a naturally occurring biodegradable and biocompatible polysaccharide, which can coat the surface of PLGA to alter the release of drugs. Magnesium gluconate (MgG) was encapsulated in the PLGA and PLGA/chitosan microspheres by utilizing the double emulsion solvent evaporation technique for controlled release study. The microspheres were tested with respect to several physicochemical and biological properties, including morphology, chemical structure, chitosan adsorption efficiency, magnesium encapsulation efficiency, in vitro release of magnesium ions, and cellular compatibility using both human adipose-derived stem cells (ASCs) and PC12 cells. Chitosan coated PLGA microspheres can significantly control the release of magnesium ions compared to uncoated PLGA microspheres. Both coated and uncoated microspheres showed good cellular compatibility.

  4. STRUCTURING OF DIAMOND FILMS USING MICROSPHERE LITHOGRAPHY

    Directory of Open Access Journals (Sweden)

    Mária Domonkos

    2014-10-01

    Full Text Available In this study, the structuring of micro- and nanocrystalline diamond thin films is demonstrated. The structuring of the diamond films is performed using the technique of microsphere lithography followed by reactive ion etching. Specifically, this paper presents a four-step fabrication process: diamond deposition (microwave plasma assisted chemical vapor deposition, mask preparation (by the standard Langmuir-Blodgett method, mask modification and diamond etching. A self-assembled monolayer of monodisperse polystyrene (PS microspheres with close-packed ordering is used as the primary template. Then the PS microspheres and the diamond films are processed in capacitively coupled radiofrequency plasma  using different plasma chemistries. This fabrication method illustrates the preparation of large arrays of periodic and homogeneous hillock-like structures. The surface morphology of processed diamond films is characterized by scanning electron microscopy and atomic force microscope. The potential applications of such diamond structures in various fields of nanotechnology are also briefly discussed.

  5. Adsorption behavior of protein onto siloxane microspheres

    International Nuclear Information System (INIS)

    Liu Bailing; Cao Shunsheng; Deng Xiaobo; Li Songjun; Luo Rong

    2006-01-01

    The siloxane microspheres with core-shell structure (PMMA/PMPS) (MMA, methyl methacrylate; MPS, 3-methacryloxypropyl-trimethoxysilane) have been prepared by dispersion polymerization as described in our previous work. In this paper, the developed poly(MMA-MPS) microspheres, as a carrier, are used to investigate the adsorption behavior of bovine serum albumin (BSA) on them. The Langmuir and Freundlich models have been applied to describe the adsorption behavior. The experimental results indicated that the presence of PMPS evidently increases the adsorption rate and the amount of protein, and it also influences the interaction of BSA molecules. The adsorption of BSA on the poly(MMA-MPS) microspheres seems to be sensitive to pH and ionic strength. The fittings curves from Langmuir and Freundlich models showed that the adsorption was actually more complicated than ideal situation because one or more interactions were involved in the process. For understanding the electronic contribution, the Zeta potential was used to measure the reactive system before and after protein adsorption

  6. Adsorption behavior of protein onto siloxane microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Liu Bailing [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China)]. E-mail: Blliuchem@hotmail.com; Cao Shunsheng [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Deng Xiaobo [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Li Songjun [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China); Luo Rong [Chengdu Institute of Organic Chemistry, Graduate School of CAS, Chinese Academy of Sciences, Chengdu 610041 (China)

    2006-09-15

    The siloxane microspheres with core-shell structure (PMMA/PMPS) (MMA, methyl methacrylate; MPS, 3-methacryloxypropyl-trimethoxysilane) have been prepared by dispersion polymerization as described in our previous work. In this paper, the developed poly(MMA-MPS) microspheres, as a carrier, are used to investigate the adsorption behavior of bovine serum albumin (BSA) on them. The Langmuir and Freundlich models have been applied to describe the adsorption behavior. The experimental results indicated that the presence of PMPS evidently increases the adsorption rate and the amount of protein, and it also influences the interaction of BSA molecules. The adsorption of BSA on the poly(MMA-MPS) microspheres seems to be sensitive to pH and ionic strength. The fittings curves from Langmuir and Freundlich models showed that the adsorption was actually more complicated than ideal situation because one or more interactions were involved in the process. For understanding the electronic contribution, the Zeta potential was used to measure the reactive system before and after protein adsorption.

  7. Use of Aripiprazole Long Acting Injection in Negative Symptoms of Schizophrenia

    Directory of Open Access Journals (Sweden)

    Suneeta James

    2016-01-01

    Full Text Available Background. Evidence for the efficacious use of second-generation antipsychotics for the treatment of negative symptoms in schizophrenia is scant. Case Presentation. We report the case of a 34-year-old female of Afro-Caribbean origin, who presented with prominent negative symptoms of schizophrenia and was successfully treated with aripiprazole long acting injection. Within a period of six to nine months, the patient returned to her premorbid level of functioning. Conclusion. Aripiprazole long acting injection promises benefits in the treatment of negative symptoms of schizophrenia. Further research needs to be conducted on the use of this drug.

  8. Magnetic Ganoderma lucidum spore microspheres: A novel material to immobilize CotA multicopper oxidase for dye decolorization

    International Nuclear Information System (INIS)

    Fan, Lili; Wang, Yan; Zhao, Min; Song, Jinzhu; Wang, Jueyu; Jin, Zijing

    2016-01-01

    Highlights: • Hollow microspheres were obtained from Ganoderma lucidum spores. • Novel magnetic microspheres were prepared by load hollow spore microspheres with Fe_3O_4 nanoparticles. • CotA multicopper oxidase was immobilized on the magnetic spore microspheres for indigo carmine decolorization. • The immobilized CotA displayed higher decolorization capability and reusability. - Abstract: In this study, hollow microspheres were obtained from Ganoderma lucidum spores. Then the hollow microspheres were loaded with Fe_3O_4 nanoparticles to prepare novel magnetic spore microspheres. TEM images and X-ray diffractometry demonstrated that the Fe_3O_4 nanoparticles were incorporated throughout the spore microsphere. CotA multicopper oxidase was chosen as biomacromolecule to study the loading ability of the magnetic spore microspheres. The combination of the CotA enzyme with the microsphere was observed by laser scanning confocal microscope. The loaded amount of CotA on the microspheres was 75 mg/g when the CotA concentration was 1.2 mg/mL and the activity recovery of the immobilized CotA was 81%. The magnetic microspheres loaded with CotA, which can be easily and quickly recovered by an external magnetic field, were used for dye decolorization. After 1 h decolorization, 99% of the indigo carmine has been removed by 10 mg microspheres. In addition, the immobilized CotA retained 75% of activity after 10 consecutive cycles, which indicated that the magnetic spore microspheres are good support material for immobilization of the enzyme.

  9. Synthesis and electrochemical properties of {alpha}-MnO{sub 2} microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Wang Hongen [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China); Zhengzhou Research Institute of CHALCO, Zhengzhou Research Institute of Light Metals, Zhengzhou 450041 (China); Qian Dong [College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China)], E-mail: qiandong6@yahoo.com.cn

    2008-06-15

    We report the synthesis of {alpha}-MnO{sub 2} microspheres by a low-temperature hydrothermal method involving no templates or catalysts. The products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-dispersive X-ray spectrum (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectrum (FT-IR), and Brunauer-Emmett-Teller (BET). The results show that the as-synthesized products are mainly composed of large quantities of {alpha}-MnO{sub 2} microspheres having a sea-urchin shape and a few microspheres constructed of small nanorods. Electrochemical characterization indicates that the resulting {alpha}-MnO{sub 2} microspheres display promising discharge properties than the commercial electrolytic manganese dioxides (EMD) when used as cathodes in alkaline Zn-MnO{sub 2} batteries.

  10. Long-acting β2-agonists in asthma

    DEFF Research Database (Denmark)

    Jacobson, Glenn A; Raidal, Sharanne; Hostrup, Morten

    2018-01-01

    Long-acting β2-agonists (LABAs) such as formoterol and salmeterol are used for prolonged bronchodilatation in asthma, usually in combination with inhaled corticosteroids (ICSs). Unexplained paradoxical asthma exacerbations and deaths have been associated with LABAs, particularly when used without...... and effects on BHR, particularly that (S)-enantiomers of β2-agonists may be deleterious to asthma control. LABAs display enantioselective pharmacokinetics and pharmacodynamics. Biological plausibility of the deleterious effects of β2-agonists (S)-enantiomers is provided by in vitro and in vivo studies from...... mechanism in rapid asthma deaths. More effort should therefore be applied to investigating potential enantiospecific effects of LABAs on safety, specifically bronchoprotection. Safety studies directly assessing the effects of LABA (S)-enantiomers on BHR are long overdue....

  11. Release of proteins via ion exchange from albumin-heparin microspheres

    NARCIS (Netherlands)

    Kwon, Glen S.; Bae, You Han; Cremers, H.F.M.; Cremers, Harry; Feijen, Jan; Kim, Sung Wan

    1992-01-01

    Albumin-heparin and albumin microspheres were prepared as ion exchange gels for the controlled release of positively charged polypeptides and proteins. The adsorption isotherms of chicken egg and human lysozyme, as model proteins, on microspheres were obtained. An adsorption isotherm of chicken egg

  12. Preparation of polymethacrylic acid-grafted HEMA/PVP microspheres and preliminary study on basic protein adsorption.

    Science.gov (United States)

    Gao, Baojiao; Hu, Hongyan; Guo, Jianfeng; Li, Yanbin

    2010-06-01

    The crosslinked copolymeric microspheres (HEMA/NVP) of N-vinylpyrrolidone (NVP) and 2-hydroxyethyl methacrylate (HEMA) were prepared using inverse suspension polymerization method. Subsequently, the reaction of methacryloyl chloride with the hydroxyl groups on the surfaces of HEMA/NVP microspheres was performed, leading to the introduction of polymerisable double bonds onto the surfaces of microspheres HEMA/NVP. Afterward, methacrylic acid was allowed to be graft-polymerized on microspheres HEMA/NVP in the manner of "grafting from", resulting in the grafted microspheres PMAA-HEMA/NVP. The grafted microspheres PMAA-HEMA/NVP were fully characterized with several means. The graft-polymerization of MAA on microspheres HEMA/NVP was studied in detail, and the optimal reaction conditions were determined. Thereafter, the adsorption property of the grafted microspheres PMAA-HEMA/NVP for lysozyme as a basic protein model was preliminarily examined to explore the feasibility of removing deleterious basic protein such as density lipoprotein from blood. The experimental results indicate that the PMAA grafting degree on microspheres HEMA/NVP is limited because an enwinding polymer layer as a kinetic barrier on the surfaces of HEMA/NVP microspheres will be formed during the graft-polymerization, and block the graft-polymerization. In order to enhance PMAA grafting degree, reaction temperature, monomer concentration and the used amount of initiator should be effectively controlled. The experimental results also reveal that the grafted microspheres PMAA-HEMA/NVP possess very strong adsorption ability for lysozyme by right of strong electrostatic interaction. Copyright 2010 Elsevier B.V. All rights reserved.

  13. In-vitro studies of enteric coated diclofenac sodium-carboxymethylcellulose microspheres.

    Science.gov (United States)

    Arica, B; Arica, M Y; Kaş, H S; Hincal, A A; Hasirci, V

    1996-01-01

    MIcrospheres containing diclofenac sodium (DS) were prepared using carboxymethylcellulose (CMC) as the main support material (1.0, 2.0, 3.0% (w/v)) and aluminum chloride as the crosslinker. Drug to polymer ratios of 1:1, 1:2 and 1:4 were used to obtain a range of microspheres. The microspheres were then coated with an enteric coating material, Eudragit S-100, efficiency, % yield value, particle sizes an in-vitro dissolution behaviour were investigated. The surface of the enteric coated microspheres seemed to be all covered with Eudragit S-100 from scanning electron microscopy observation. It was also observed that increasing the CMC concentration led to an increase in the encapsulation efficiency, % yield value and particle size and decreased the release rate. Eudragit S-100 coating did not significantly alter the size but the release rate was significantly lower even when the lower concentration solution was used.

  14. Biocompatibility, Inflammatory Response, and Recannalization Characteristics of Nonradioactive Resin Microspheres: Histological Findings

    International Nuclear Information System (INIS)

    Bilbao, Jose I.; Martino, Alba de; Luis, Esther de; Diaz-Dorronsoro, Lourdes; Alonso-Burgos, Alberto; Martinez de la Cuesta, Antonio; Sangro, Bruno; Garcia de Jalon, Jose A.

    2009-01-01

    Intra-arterial radiotherapy with yttrium-90 microspheres (radioembolization) is a therapeutic procedure exclusively applied to the liver that allows the direct delivery of high-dose radiation to liver tumors, by means of endovascular catheters, selectively placed within the tumor vasculature. The aim of the study was to describe the distribution of spheres within the precapillaries, inflammatory response, and recannalization characteristics after embolization with nonradioactive resin microspheres in the kidney and liver. We performed a partial embolization of the liver and kidney vessels in nine white pigs. The left renal and left hepatic arteries were catheterized and filled with nonradioactive resin microspheres. Embolization was defined as the initiation of near-stasis of blood flow, rather than total occlusion of the vessels. The hepatic circulation was not isolated so that the effects of reflux of microspheres into stomach could be observed. Animals were sacrificed at 48 h, 4 weeks, and 8 weeks, and tissue samples from the kidney, liver, lung, and stomach evaluated. Microscopic evaluation revealed clusters of 10-30 microspheres (15-30 μm in diameter) in the small vessels of the kidney (the arciform arteries, vasa recti, and glomerular afferent vessels) and liver. Aggregates were associated with focal ischemia and mild vascular wall damage. Occlusion of the small vessels was associated with a mild perivascular inflammatory reaction. After filling of the left hepatic artery with microspheres, there was some evidence of arteriovenous shunting into the lungs, and one case of cholecystitis and one case of marked gastritis and ulceration at the site of arterial occlusion due to the presence of clusters of microspheres. Beyond 48 h, microspheres were progressively integrated into the vascular wall by phagocytosis and the lumen recannalized. Eight-week evaluation found that the perivascular inflammatory reaction was mild. Liver cell damage, bile duct injury, and

  15. Biomimetic composite microspheres of collagen/chitosan/nano-hydroxyapatite: In-situ synthesis and characterization.

    Science.gov (United States)

    Teng, Shu-Hua; Liang, Mian-Hui; Wang, Peng; Luo, Yong

    2016-01-01

    The collagen/chitosan/hydroxyapatite (COL/CS/HA) composite microspheres with a good spherical form and a high dispersity were successfully obtained using an in-situ synthesis method. The FT-IR and XRD results revealed that the inorganic phase in the microspheres was crystalline HA containing carbonate ions. The morphology of the composite microspheres was dependent on the HA content, and a more desirable morphology was achieved when 20 wt.% HA was contained. The composite microspheres exhibited a narrow particle distribution, most of which ranged from 5 to 10 μm. In addition, the needle-like HA nano-particles were uniformly distributed in the composite microspheres, and their crystallinity and crystal size decreased with the HA content. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. A sonochemical route for the encapsulation of drug in magnetic microspheres

    International Nuclear Information System (INIS)

    Wu Shixi; Jiang Wei; Zhang Xiaojuan; Sun Huan; Zhang Wenyao; Dai Junjun; Liu Li; Chen Xiaolong; Li Fengsheng

    2012-01-01

    This study focused on the preparation and characterization of magnetic targeted antibiotic microspheres (MTAMs). MTAMs were prepared by a sonochemical method in the presence of hydrophobic Fe 3 O 4 nanoparticles and tetracycline. The properties of MTAMs were characterized by transmission electron microscopy, Fourier-transform infrared spectrum, thermogravimetric analysis, vibration sample magnetometry, and bacteriostatic experiment. The results indicated that the superparamagnetic microspheres have ultrafine size (below 230 nm), high saturation magnetization (80.90 emu/g), high biocompatibility, biodegradability, controlled-release, and antibiotic effect. It has been proved that MTAMs can carry out the function of magnetic targeted drugs delivery system by putting together magnetic materials and antibiotics. The possible formation mechanism of MTAMs was also discussed. In summary, MTAMs had potential in medical imaging, drug targeting, and catalysis. - Highlights: → Microspheres carry out the function of magnetic targeted drugs delivery system. → Microspheres exhibit high saturation magnetization and antibiotic effect. → Microspheres have a potential application in the biomedical field. → The sonochemical method is well controlled for the synthesis.

  17. Preparation and photocatalytic activity of hollow ZnSe microspheres via Ostwald ripening

    International Nuclear Information System (INIS)

    Zhang Lihui; Yang Heqing; Xie Xiaoli; Zhang Fenghua; Li Li

    2009-01-01

    Hollow ZnSe microspheres were prepared via a facile hydrothermal reaction of Zn(AC) 2 .2H 2 O with Na 2 SeO 3 and ethylene glycol in NaOH solution at 180 deg. C for 12 h. The products were characterized by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy and Raman spectrum. The hollow microspheres with the diameters of about 2 μm are constructed from ZnSe nanoparticles with the cubic zinc blende structure, the size of hollow interiors and constituent ZnSe nanodots can be tuned by changing the reaction time. The hollow microspheres are formed via an Ostwald ripening process. Photoluminescence and photocatalytic activity of the hollow ZnSe microspheres were studied at room temperature. The results indicate that the hollow microspheres constructed from ZnSe nanoparticles display a strong near-band edge emission at 479 nm and a very weak deep defect (DD) related emission at 556 nm and a high photocatalytic activity in the photodegradation of methyl orange. The photodegradation of methyl orange catalyzed by the ZnSe microspheres is a pseudo first-order reaction

  18. Once-daily glycopyrronium bromide, a long-acting muscarinic antagonist, for chronic obstructive pulmonary disease

    DEFF Research Database (Denmark)

    Ulrik, Charlotte Suppli

    2012-01-01

    Long-acting bronchodilators are central in the pharmacological management of patients with chronic obstructive pulmonary disease (COPD). The aim of this systematic review is to provide an overview of the studies evaluating the safety and clinical efficacy of inhaled glycopyrronium bromide, a novel...... long-acting muscarinic antagonist, in patients with COPD....

  19. Behaviour of (Th, U)O2 microspheres under compression tests and pelletization

    International Nuclear Information System (INIS)

    Ferreira, R.A.N.

    1982-12-01

    The interrelation between the behaviour of isolated microspheres in compression tests and the microstructure of sintered pellets obtained with these microspheres, was investigated. Various batches of (Th, 5 w/o U)O 2 microspheres were produced applying the so-called gel process. The production parameters were diversified both as to the composition and to the heat treatments. The resulting products underwent compression tests in an universal tension and compression machine as single microspheres and, as bulk material, were compacted and sintered. The results of the compression tests revealed the existence of two distinct classes of fragmentation behaviour. Each of these classes causes a distinct behaviour during the pelletization, too, resulting in fuel pellets with quite different microstructures. It was evidenced that there is a relationship between these differences in the microstructure and the behaviour of the single microspheres in the compression test. (Author) [pt

  20. Preparation of hydroxypropyl cyclosophoraose/dextran microspheres for the controlled release of ciprofloxacin

    International Nuclear Information System (INIS)

    Lee, Benel; Jeong, Da Ham; Joo, Sang Woo; Choi, Jae Min; Jung, Seung Ho; Cho, Eun Na; Lee, Jae Yung; Park, Se Yeon

    2016-01-01

    Hydroxypropyl cyclosophoraose/dextran (HPCys/dextran) microspheres were prepared using an emulsion polymerization method for use as drug carriers to achieve the controlled release of a poorly water-soluble antibacterial drug, ciprofloxacin (CFX). Cyclosophoraoses are cyclic (1 → 2)-β-d-glucans isolated from the Rhizobium species. Characteristics of HPCys/dextran microspheres were investigated using Fourier transform infrared analysis, solid-state 13C nuclear magnetic resonance spectroscopy, and field emission scanning electron microscopy. The amount of CFX released from these microspheres at pH 7.4 (intestinal phase pH) was about two times higher than that released at pH 1.2 (gastric phase pH). Furthermore, HPCys/dextran microspheres did not show any toxicity in human embryonic kidney cells. We propose that HPCys/dextran microspheres could be used as an effective pH-dependent release system for poorly water-soluble drugs such as CFX

  1. Preparation of hydroxypropyl cyclosophoraose/dextran microspheres for the controlled release of ciprofloxacin

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Benel; Jeong, Da Ham; Joo, Sang Woo; Choi, Jae Min; Jung, Seung Ho; Cho, Eun Na [Center for Biotechnology Research in UBITA (CBRU), Konkuk University, Seoul (Korea, Republic of); Lee, Jae Yung [Dept. Biological Science, Mokpo National University, Mokpo (Korea, Republic of); Park, Se Yeon [Dept. Applied Chemistry, Dongduk Women' s University, Seoul (Korea, Republic of)

    2016-12-15

    Hydroxypropyl cyclosophoraose/dextran (HPCys/dextran) microspheres were prepared using an emulsion polymerization method for use as drug carriers to achieve the controlled release of a poorly water-soluble antibacterial drug, ciprofloxacin (CFX). Cyclosophoraoses are cyclic (1 → 2)-β-d-glucans isolated from the Rhizobium species. Characteristics of HPCys/dextran microspheres were investigated using Fourier transform infrared analysis, solid-state 13C nuclear magnetic resonance spectroscopy, and field emission scanning electron microscopy. The amount of CFX released from these microspheres at pH 7.4 (intestinal phase pH) was about two times higher than that released at pH 1.2 (gastric phase pH). Furthermore, HPCys/dextran microspheres did not show any toxicity in human embryonic kidney cells. We propose that HPCys/dextran microspheres could be used as an effective pH-dependent release system for poorly water-soluble drugs such as CFX.

  2. PLGA and PHBV Microsphere Formulations and Solid-State Characterization

    DEFF Research Database (Denmark)

    Yang, Chiming; Plackett, David; Needham, David

    2009-01-01

    To develop and characterize the solid-state properties of poly(DL-lactic-co-glycolic acid) (PLGA) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) microspheres for the localized and controlled release of fusidic acid (FA). The effects of FA loading and polymer composition on the me...... of a DCM-FA-rich phase in the forming microsphere....

  3. A novel approach to preparing magnetic protein microspheres with core-shell structure

    Science.gov (United States)

    Jiang, Wei; Sun, Zhendong; Li, Fengsheng; Chen, Kai; Liu, Tianyu; Liu, Jialing; Zhou, Tianle; Guo, Rui

    2011-03-01

    Magnetic protein microspheres with core-shell structure were prepared through a novel approach based on the sonochemical method and the emulsion solvent evaporation method. The microspheres are composed of the oleic acid and undecylenic acid modified Fe 3O 4 cores and coated with globular bovine serum albumin (BSA). Under an optimized condition, up to 57.8 wt% of approximately 10 nm superparamagnetic Fe 3O 4 nanoparticles could be uniformly encapsulated into the BSA microspheres with the diameter of approximately 160 nm and the high saturation magnetization of 38.5 emu/g, besides of the abundant functional groups. The possible formation mechanism of magnetic microspheres was discussed in detail.

  4. Magnetic Ganoderma lucidum spore microspheres: A novel material to immobilize CotA multicopper oxidase for dye decolorization

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Lili [School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001 (China); Wang, Yan, E-mail: wangy_msn@hit.edu.cn [School of Chemistry and Chemical Engineering, Harbin Institute of Technology, Harbin 150001 (China); Zhao, Min [College of Life Science, Northeast Forestry University, Harbin 150040 (China); Song, Jinzhu [School of Life Science and Technology, Harbin Institute of Technology, Harbin 150001 (China); Wang, Jueyu; Jin, Zijing [College of Life Science, Northeast Forestry University, Harbin 150040 (China)

    2016-08-05

    Highlights: • Hollow microspheres were obtained from Ganoderma lucidum spores. • Novel magnetic microspheres were prepared by load hollow spore microspheres with Fe{sub 3}O{sub 4} nanoparticles. • CotA multicopper oxidase was immobilized on the magnetic spore microspheres for indigo carmine decolorization. • The immobilized CotA displayed higher decolorization capability and reusability. - Abstract: In this study, hollow microspheres were obtained from Ganoderma lucidum spores. Then the hollow microspheres were loaded with Fe{sub 3}O{sub 4} nanoparticles to prepare novel magnetic spore microspheres. TEM images and X-ray diffractometry demonstrated that the Fe{sub 3}O{sub 4} nanoparticles were incorporated throughout the spore microsphere. CotA multicopper oxidase was chosen as biomacromolecule to study the loading ability of the magnetic spore microspheres. The combination of the CotA enzyme with the microsphere was observed by laser scanning confocal microscope. The loaded amount of CotA on the microspheres was 75 mg/g when the CotA concentration was 1.2 mg/mL and the activity recovery of the immobilized CotA was 81%. The magnetic microspheres loaded with CotA, which can be easily and quickly recovered by an external magnetic field, were used for dye decolorization. After 1 h decolorization, 99% of the indigo carmine has been removed by 10 mg microspheres. In addition, the immobilized CotA retained 75% of activity after 10 consecutive cycles, which indicated that the magnetic spore microspheres are good support material for immobilization of the enzyme.

  5. Carbidopa/levodopa-loaded biodegradable microspheres: in vivo evaluation on experimental Parkinsonism in rats.

    Science.gov (United States)

    Arica, Betül; Kaş, H Süheyla; Moghdam, Amir; Akalan, Nejat; Hincal, A Atilla

    2005-02-16

    The purpose of this study was to prepare and characterize injectable carbidopa (CD)/levodopa (LD)-loaded Poly(L-lactides) (L-PLA), Poly(D,L-lactides) (D,L-PLA) and Poly(D,L-lactide-co-glycolide) (PLAGA) microspheres for the intracerebral treatment of Parkinson's disease. The microspheres were prepared by solvent evaporation method. The polymers' (L-PLA, D,L-PLA and PLAGA) concentrations were 10% (w/w) in the organic phase; the emulsifiers [sodium carboxymethylcellulose (NaCMC):sodium oleate (SO) and Polyvinyl alcohol (PVA):SO mixture (4:1 w/v)] concentrations were 0.75% in the aqueous phase. Microspheres were analyzed for morphological characteristics, size distribution, drug loading and in vitro release. The release profile of CD/LD from microspheres was characterized in the range of 12-35% within the first hour of the in vitro release experiment. The efficiency of CD- and LD-encapsulated microspheres to striatal transplantation and the altering of apomorphine-induced rotational behavior in the 6-hydroxydopamine (6-OHDA) unilaterally lesioned rat model were also tested. 6-OHDA/CD-LD-loaded microsphere groups exhibited lower rotation scores than 6-OHDA/Blank microsphere groups as early as 1 week postlesion. These benefits continued throughout the entire experimental period and they were statistically significant during the 1, 2 and 8 weeks (p<0.05). CD/LD-loaded microspheres were specifically prepared to apply as an injectable dosage forms for brain implantation.

  6. Fracture properties and heat resistance of ceramics consisting of microspheres of stabilized zirconium dioxide

    International Nuclear Information System (INIS)

    Krasulin, Yu.L.; Barinov, S.M.; Ivanov, A.B.; Timofeev, V.N.; Grevtsev, S.N.; Ivanov, D.A.

    1980-01-01

    Determined were effective specific fracture work, critical coefficient of stress intensity in the upper point of the fracture, strength and heat resistance during heat changes (20-1300 deg C) of the material produced by sintering stabilized zirconium dioxide microspheres. Dependence of these characteristics on granulometric composition of microspheres was determined. It was ascertained that the additional introduction of large microspheres into the bulk of small microspheres increased the metal fracture work. Specific work of material fracture progress exceeded specific work of fracture motion initiation. High value of fracture work together with high strength permits to use the material formed of microspheres as structural ceramics

  7. Comparison of gas clearance and radioactive microspheres for pancreatic blood flow measurement

    International Nuclear Information System (INIS)

    DeMar, A.R.; Graham, L.S.; Lake, R.; Fink, A.S.

    1989-01-01

    Measurement of pancreatic blood flow (PBF) is technically demanding. Although radiolabeled microspheres are considered the gold standard for PBF assessment, they have practical limitations. In the current study, H 2 and xenon-133 gas clearance techniques were adapted to PBF measurement and compared to radiolabeled microsphere techniques. Simultaneous measurements of PBF were made using either hydrogen or xenon gas washout and radiolabeled microspheres. Measurements were made under basal, vasoconstricted (vasopressin 2U i.v. or nicotine 4 micrograms/kg/h) and stimulated (secretin 125 ng/kg/h or 2 U/kg i.v.) conditions (random order). Mean PBF was 26.9 +/- 5.3, 50.5 +/- 2.3 and 27.6 +/- 5.2 ml/min/100 g basally, 36.9 +/- 8.0, 90.1 +/- 18.9, and 81.7 +/- 14.5 ml/min/100 g in the stimulated state, and 24.2 +/- 7.8, 25.0 +/- 3.5, and 14.9 +/- 7.5 ml/min/100 g in the vasoconstricted state for hydrogen gas clearance, xenon gas clearance, and radiolabeled microspheres, respectively. The H 2 clearance technique resulted in tissue trauma, was complicated by frequent electrode displacement, and correlated poorly (r2 = 0.36, p greater than 0.05) with microsphere values. In contrast, xenon clearance measurement had no apparent effect on the pancreas and correlated well (r2 = 0.83, p less than 0.01) with microsphere data. We conclude that xenon clearance offers an attractive, validated alternative to radiolabeled microspheres for measuring pancreatic blood flow

  8. Preparation and characterization of gelatin–hydroxyapatite composite microspheres for hard tissue repair

    International Nuclear Information System (INIS)

    Chao, Shao Ching; Wang, Ming-Jia; Pai, Nai-Su; Yen, Shiow-Kang

    2015-01-01

    Gelatin–hydroxyapatite composite microspheres composed of 21% gelatin (G) and 79% hydroxyapatite (HA) with uniform morphology and controllable size were synthesized from a mixed solution of Ca(NO 3 ) 2 , NH 4 H 2 PO 4 and gelatin by a wet-chemical method. Material analyses such as X-ray diffraction (XRD), scanning/transmission electron microscopy examination (SEM/TEM) and inductively coupled plasma-mass spectroscopy (ICP-MS) were used to characterize G–HA microspheres by analyzing their crystalline phase, microstructure, morphology and composition. HA crystals precipitate along G fibers to form nano-rods with diameters of 6–10 nm and tangle into porous microspheres after blending. The cell culture indicates that G–HA composite microspheres without any toxicity could enhance the proliferation and differentiation of osteoblast-like cells. In a rat calvarial defect model, G–HA bioactive scaffolds were compared with fibrin glue (F) and Osteoset® Bone Graft Substitute (OS) for their capacity of regenerating bone. Four weeks post-implantation, new bone, mineralization, and expanded blood vessel area were found in G–HA scaffolds, indicating greater osteoconductivity and bioactivity than F and OS. - Highlights: • G–HA composite microspheres were prepared by hydroxyapatite and gelatin. • In vitro tests indicated that the G–HA microspheres were biocompatible and bioactive. • In in vitro tests, G–HA microspheres could be applied in hard tissue engineering. • G–HA had healed the bone defect and provides a high proportion of surface area to open space

  9. Temperature influence in crystallinity of polymer microspheres; Influencia da temperatura na cristalinidade de microesferas polimericas

    Energy Technology Data Exchange (ETDEWEB)

    Rezende, Cristiane de P.; Novack, Katia M., E-mail: knovack@iceb.ufop.br [Universidade Federal de Ouro Preto - UFOP, ICEB, DEQUI, Ouro Preto, MG (Brazil)

    2011-07-01

    Drug delivery technology is evolving through the creation of new techniques of drug delivery effectively. The new methods used in drugs administration are based in microencapsulation process. Microsphere encapsulation modifies drug delivery bringing benefits and efficiency. In this work has been evaluated the influence of temperature in microspheres preparation. Microspheres were obtained by PMMA-co-PEG (COP) copolymer with indomethacin inserted in polymer matrix. Samples were characterized by SEM, DSC and XRD. SEM micrographs confirmed the formation of different sizes of microspheres and it was verified that higher temperatures make more crystalline microspheres. (author)

  10. Resonant microsphere gyroscope based on a double Faraday rotator system.

    Science.gov (United States)

    Xie, Chengfeng; Tang, Jun; Cui, Danfeng; Wu, Dajin; Zhang, Chengfei; Li, Chunming; Zhen, Yongqiu; Xue, Chenyang; Liu, Jun

    2016-10-15

    The resonant microsphere gyroscope is proposed based on a double Faraday rotator system for the resonant microsphere gyroscope (RMSG) that is characterized by low insertion losses and does not destroy the reciprocity of the gyroscope system. Use of the echo suppression structure and the orthogonal polarization method can effectively inhibit both the backscattering noise and the polarization error, and reduce them below the system sensitivity limit. The resonance asymmetry rate dropped from 34.2% to 2.9% after optimization of the backscattering noise and the polarization noise, which greatly improved the bias stability and the scale factor linearity of the proposed system. Additionally, based on the optimum parameters for the double Faraday rotator system, a bias stability of 0.04°/s has been established for an integration time of 10 s in 1000 s in a resonator microsphere gyroscope using a microsphere resonator with a diameter of 1 mm and a Q of 7.2×106.

  11. The physical and chemical stability of suspensions of sustained-release diclofenac microspheres.

    Science.gov (United States)

    Lewis, L; Boni, R L; Adeyeye, C M

    1998-01-01

    The major challenge in liquid sustained-release oral suspensions is to minimize drug diffusion into the suspending medium and to retain the original properties of the microparticles during storage. Diclofenac wax microspheres prepared by the hydrophobic congealable disperse phase method were formulated as a sustained release suspension and stored at three different temperatures (25, 37 and 45 degrees C) for 3 months, to evaluate the physical and chemical stability of the suspended microspheres. Suspensions of microspheres stored at ambient temperatures were both physically and chemically stable, but at higher temperatures, up to 45 degrees C, there was a decrease in drug release due to scaling and melting on the microsphere surface as observed by scanning electron microscopy. However, on prolonged storage, up to 90 days, especially at 45 degrees C, temperature became a dominant factor causing an increase in drug release. The suspension of diclofenac microspheres was chemically stable for 3 months, while the plain drug suspension exhibited slight degradation.

  12. Real-space observation of nanojet-induced modes in a chain of microspheres

    International Nuclear Information System (INIS)

    Liu, Cheng-Yang; Wang, Po-Kai

    2014-01-01

    The three-dimensional real-space observation of photonic nanojet-induced modes in a chain of microspheres with different diameters is reported. The optical transmission properties of a chain of microspheres are studied by using high resolution finite-difference time-domain calculation. The photonic nanojet-induced modes in different chains of microspheres are measured by using a scanning optical microscope system with an optical-fiber probe. We observe the photonic nanojet-induced modes from optical microscope images for chains of 3 μm, 5 μm, and 8 μm microspheres deposited on a patterned silicon substrate. The incident beam can be periodically reproduced in chains of dielectric microspheres giving rise to lossless periodically optical focusing with period of two diameters. Detailed theoretical and experimental data on the transmission, scattering loss, and field-of-view are presented. This waveguide technique can be used in biomedical microscopy, ultra-precise laser process, microfluidics, and nanophotonic circuits.

  13. Real-space observation of nanojet-induced modes in a chain of microspheres

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Cheng-Yang, E-mail: cyliu@mail.tku.edu.tw; Wang, Po-Kai

    2014-04-01

    The three-dimensional real-space observation of photonic nanojet-induced modes in a chain of microspheres with different diameters is reported. The optical transmission properties of a chain of microspheres are studied by using high resolution finite-difference time-domain calculation. The photonic nanojet-induced modes in different chains of microspheres are measured by using a scanning optical microscope system with an optical-fiber probe. We observe the photonic nanojet-induced modes from optical microscope images for chains of 3 μm, 5 μm, and 8 μm microspheres deposited on a patterned silicon substrate. The incident beam can be periodically reproduced in chains of dielectric microspheres giving rise to lossless periodically optical focusing with period of two diameters. Detailed theoretical and experimental data on the transmission, scattering loss, and field-of-view are presented. This waveguide technique can be used in biomedical microscopy, ultra-precise laser process, microfluidics, and nanophotonic circuits.

  14. Solvothermal coating LiNi_0_._8Co_0_._1_5Al_0_._0_5O_2 microspheres with nanoscale Li_2TiO_3 shell for long lifespan Li-ion battery cathode materials

    International Nuclear Information System (INIS)

    Wu, Naiteng; Wu, Hao; Liu, Heng; Zhang, Yun

    2016-01-01

    LiNi_0_._8Co_0_._1_5Al_0_._0_5O_2 (NCA) microspheres covered by a nanoscale Li_2TiO_3-based shell were synthesized by a facile strategy based on a solvothermal pre-coating treatment combined with a post-sintering lithiation process. The morphology, structure and composition of the Li_2TiO_3-coated NCA samples were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning scanning electron microscope (SEM) with an energy-dispersive X-ray spectroscope (EDS), and transmission electron microscopy (TEM). Owing to the complete, uniform and nanoscale Li_2TiO_3 coating shell, the resultant surface-modified NCA microspheres used as Li-ion battery cathode materials manifest remarkably enhanced cycling performances, attaining 94% and 84% capacity retention after 200 and 400 cycles at 0.5 C, respectively, which is much better than the pristine NCA counterpart (60% retention, 200 cycles). More impressively, the surface-modified NCA also shows an intriguing storage stability. After being stored at 30 °C for 50 days, the coated NCA-based cells are subjected to be cycled both at room and elevated temperatures, in which the aged cells can still remain 84% capacity retention after 200 cycles at 25 °C and 77% capacity retention after 200 cycles at 55 °C, respectively. All these results demonstrate that the Li_2TiO_3-coated LiNi_0_._8Co_0_._1_5Al_0_._0_5O_2 microsphere is a promising cathode material for Li-ion batteries with long lifespan. - Graphical abstract: Nanoscale Li_2TiO_3-based shell encapsulated LiNi_0_._8Co_0_._1_5Al_0_._0_5O_2 (NCA) microspheres are fabricated through a solvothermal pre-coating treatment combined with post-lithiation process. The surface-coated NCA as cathode materials shows a remarkably enhanced cycling performance and storage stability for long lifespan Li-ion batteries. - Highlights: • Li_2TiO_3 is used as coating materials for layer structured LiNi_0_._8Co_0_._1_5Al_0_._0_5O_2 cathode. • Solvothermal coating

  15. Active self-healing encapsulation of vaccine antigens in PLGA microspheres

    Science.gov (United States)

    Desai, Kashappa-Goud H.; Schwendeman, Steven P.

    2013-01-01

    Herein, we describe the detailed development of a simple and effective method to microencapsulate vaccine antigens in poly(lactic-co-glycolic acid) (PLGA) by simple mixing of preformed active self-microencapsulating (SM) PLGA microspheres in a low concentration aqueous antigen solution at modest temperature (10-38 °C). Co-encapsulating protein-sorbing vaccine adjuvants and polymer plasticizers were used to “actively” load the protein in the polymer pores and facilitate polymer self-healing at temperature > hydrated polymer glass transition temperature, respectively. The microsphere formulation parameters and loading conditions to provide optimal active self-healing microencapsulation of vaccine antigen in PLGA was investigated. Active self-healing encapsulation of two vaccine antigens, ovalbumin and tetanus toxoid (TT), in PLGA microspheres was adjusted by preparing blank microspheres containing different vaccine adjuvant (aluminum hydroxide (Al(OH)3) or calcium phosphate). Active loading of vaccine antigen in Al(OH)3-PLGA microspheres was found to: a) increase proportionally with an increasing loading of Al(OH)3 (0.88-3 wt%) and addition of porosigen, b) decrease when the inner Al(OH)3/trehalose phase to 1 mL outer oil phase and size of microspheres was respectively > 0.2 mL and 63 μm, and c) change negligibly by PLGA concentration and initial incubation (loading) temperature. Encapsulation of protein sorbing Al(OH)3 in PLGA microspheres resulted in suppression of self-healing of PLGA pores, which was then overcome by improving polymer chain mobility, which in turn was accomplished by coincorporating hydrophobic plasticizers in PLGA. Active self-healing microencapsulation of manufacturing process-labile TT in PLGA was found to: a) obviate micronization- and organic solvent-induced TT degradation, b) improve antigen loading (1.4-1.8 wt% TT) and encapsulation efficiency (~ 97%), c) provide nearly homogeneous distribution and stabilization of antigen in polymer

  16. Hierarchical CuO hollow microspheres: Controlled synthesis for enhanced lithium storage performance

    International Nuclear Information System (INIS)

    Guan Xiangfeng; Li Liping; Li Guangshe; Fu Zhengwei; Zheng Jing; Yan Tingjiang

    2011-01-01

    Graphical abstract: Hierarchical CuO microspheres with hollow interiors were formed through self-wrapping of a single layer of radically oriented CuO nanorods, and these microspheres showed excellent cycle performance and enhanced lithium storage capacity. Display Omitted Research highlights: → Hierarchical CuO hollow microspheres were prepared by a hydrothermal method. → The CuO hollow microspheres were assembled from radically oriented nanorods. → The growth mechanism was proposed to proceed via self-assembly and Ostwald's ripening. → The microspheres showed good cycle performance and enhanced lithium storage capacity. → Hierarchical microstructures with hollow interiors promote electrochemical property. - Abstract: In this work, hierarchical CuO hollow microspheres were hydrothermally prepared without use of any surfactants or templates. By controlling the formation reaction conditions and monitoring the relevant reaction processes using time-dependent experiments, it is demonstrated that hierarchical CuO microspheres with hollow interiors were formed through self-wrapping of a single layer of radically oriented CuO nanorods, and that hierarchical spheres could be tuned to show different morphologies and microstructures. As a consequence, the formation mechanism was proposed to proceed via a combined process of self-assembly and Ostwald's ripening. Further, these hollow microspheres were initiated as the anode material in lithium ion batteries, which showed excellent cycle performance and enhanced lithium storage capacity, most likely because of the synergetic effect of small diffusion lengths in building blocks of nanorods and proper void space that buffers the volume expansion. The strategy reported in this work is reproducible, which may help to significantly improve the electrochemical performance of transition metal oxide-based anode materials via designing the hollow structures necessary for developing lithium ion batteries and the relevant

  17. A study of factors affecting properties of AM/AMPS/NVP terpolymeric microspheres prepared by inverse suspension polymerization

    Science.gov (United States)

    Jiang, J. F.; Zhao, Q.; Lin, M. Q.; Wang, Y. F.; Dang, S. M.; Sun, F. F.

    2015-12-01

    Terpolymeric microspheres were synthesized by the inverse suspension polymerization of functional monomers including AMPS, NVP, and AM. The morphology and size of the obtained microspheres were measured by scanning electron microscopy (SEM) and optical microscopy. Furthermore, the swelling performances of the obtained microspheres were measured with alaser particle analyzer (LPA), and the thermal stability of the microspheres obtained was measured by differential thermal analysis (DSC-TG) and high temperature experiments involving microsphere/water dispersion. The results revealed that the extreme value of the microsphere size distribution decreased from 280 μm to 20 μm as the stirring rate increased from 175 rpm to 500 rpm. At temperatures below 25°C, the maximum achieved swelling ratio of the microspheres was 21, and the thermal stability of the terpolymer microspheres was significantly higher than that of the dipolymer microspheres. The terpolymer/water dispersions were kept at 120°C for 19d before any damage was observed.

  18. Photocatalytic activities of heterostructured TiO2-graphene porous microspheres prepared by ultrasonic spray pyrolysis

    International Nuclear Information System (INIS)

    Yang, Jikai; Zhang, Xintong; Li, Bing; Liu, Hong; Sun, Panpan; Wang, Changhua; Wang, Lingling; Liu, Yichun

    2014-01-01

    Highlights: • USP method is used to prepare TiO 2 -graphene porous microspheres. • XPS shows GO sheets in the composites has been reduced to graphene. • TiO 2 -graphene microspheres display a red-shifted absorption edge. • PL spectra indicate graphene can accept the photoexcited electrons from TiO 2 . • TiO 2 -graphene shows higher photocatalytic activity than TiO 2 under solar light. -- Abstract: TiO 2 -graphene porous microspheres were prepared by ultrasonic spray pyrolysis (USP) of aqueous suspension of graphene oxide containing TiO 2 nanoparticles (Degussa P25). The composite microspheres were characterized with SEM, XPS, photoluminescence, Raman and UV–Vis absorption spectra. TiO 2 -graphene porous microspheres displayed higher photocatalytic activity for the degradation of methylene blue solution than pristine TiO 2 microspheres under the irradiation of Xe lamp, and the highest activity was obtained at a weight percentage of graphene around 1%. The effect of graphene on photocatalytic activity of porous microsphere was discussed in terms of the enhanced charge separation by TiO 2 -graphene heterojunction, increased absorption of the visible light, as well as the possible hindrance of mass transportation in microspheres

  19. Mucoadhesive microspheres for gastroretentive delivery of acyclovir: in vitro and in vivo evaluation.

    Science.gov (United States)

    Dhaliwal, Sumeet; Jain, Subheet; Singh, Hardevinder P; Tiwary, A K

    2008-06-01

    The aim of the present investigation was to evaluate the potential use of mucoadhesive microspheres for gastroretentive delivery of acyclovir. Chitosan, thiolated chitosan, Carbopol 71G and Methocel K15M were used as mucoadhesive polymers. Microsphere formulations were prepared using emulsion-chemical crosslinking technique and evaluated in vitro, ex-vivo and in-vivo. Gelatin capsules containing drug powder showed complete dissolution (90.5 +/- 3.6%) in 1 h. The release of drug was prolonged to 12 h (78.8 +/- 3.9) when incorporated into mucoadhesive microspheres. The poor bioavailability of acyclovir is attributed to short retention of its dosage form at the absorption sites (in upper gastrointestinal tract to duodenum and jejunum). The results of mucoadhesion study showed better retention of thiolated chitosan microspheres (8.0 +/- 0.8 h) in duodenal and jejunum regions of intestine. The results of qualitative and quantitative GI distribution study also showed significant higher retention of mucoadhesive microspheres in upper GI tract. Pharmacokinetic study revealed that administration of mucoadhesive microspheres could maintain measurable plasma concentration of acyclovir through 24 h, as compared to 5 h after its administration in solution form. Thiolated chitosan microsphere showed superiority over the other formulations as observed with nearly 4.0-fold higher AUC(0-24) value (1,090 +/- 51 ng h/ml) in comparison to drug solution (281 +/- 28 ng h/ml). Overall, the result indicated prolonged delivery with significant improvement in oral bioavailability of acyclovir from mucoadhesive microspheres due to enhanced retention in the upper GI tract.

  20. A review on target drug delivery: magnetic microspheres

    OpenAIRE

    Amit Chandna; Deepa Batra; Satinder Kakar; Ramandeep Singh

    2013-01-01

    Novel drug delivery system aims to deliver the drug at a rate directed by the needs of the body during the period of treatment, and target the active entity to the site of action. A number of novel drug delivery systems have emerged encompassing various routes of administration, to achieve controlled and targeted drug delivery, magnetic micro carriers being one of them. Magnetic microsphere is newer approach in pharmaceutical field. Magnetic microspheres as an alternative to traditional ra...

  1. Properties of Amorphous Carbon Microspheres Synthesised by Palm Oil-CVD Method

    International Nuclear Information System (INIS)

    Zobir, S. A. M.; Zainal, Z.; Sarijo, S. H.; Rusop, M.

    2011-01-01

    Amorphous carbon microspheres were synthesized using a dual-furnace chemical vapour deposition method at 800-1000 deg. C. Palm oil-based cooking oil (PO) and zinc nitrate solution was used as a carbon source and catalyst precursor, respectively with PO to zinc nitrate ratio of 30:20 (v/v) and a silicon wafer as the sample target. Regular microsphere shape of the amorphous carbons was obtained and a uniform microsphere structure improved as the carbonization temperature increased from 800 to 1000 deg. C. At 800 deg. C, no regular microspheres were formed but more uniform structure is observed at 900 deg. C. Generally the microspheres size is uniform when the heating temperature was increased to 1000 deg. C, but the presence of mixed sizes can still be observed. X-ray diffraction patterns show the presence of oxide of carbon, ZnO phase together with Zn oxalate phase. Raman spectra show two broad peaks characteristic to amorphous carbon at 1344 and 1582 cm -1 for the D and G bands, respectively. These bands become more prominent as the preparation temperature increased from 800 to 1000 deg. C. This is in agreement with the formation of amorphous carbon microspheres as shown by the FESEM study and other Zn-based phases as a result of the oxidation process of the palm oil as the carbon source and the zinc nitrate as the catalyst precursor, respectively.

  2. Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

    Energy Technology Data Exchange (ETDEWEB)

    Li Fengxia [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China); Li Xiaoli, E-mail: lixiaoli0903@163.com [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China); Li Bin, E-mail: libinzh62@163.com [Heilongjiang Key Laboratory of Molecular Design and Preparation of Flame Retarded Materials, College of Science, Northeast Forestry University, Harbin 150040 (China)

    2011-11-15

    In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 {mu}m. Magnetic Fe{sub 3}O{sub 4} was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h. - Highlights: > We prepare magnetic polylactic acid microspheres loading curcumin. > The classical oil-in-water emulsion solvent-evaporation method is used. > The magnetic microspheres are regularly spherical with a diameter of 0.55-0.75 {mu}m. > They show a certain sustained release effect on in vitro drug releasing.

  3. Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

    International Nuclear Information System (INIS)

    Li Fengxia; Li Xiaoli; Li Bin

    2011-01-01

    In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 μm. Magnetic Fe 3 O 4 was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h. - Highlights: → We prepare magnetic polylactic acid microspheres loading curcumin. → The classical oil-in-water emulsion solvent-evaporation method is used. → The magnetic microspheres are regularly spherical with a diameter of 0.55-0.75 μm. → They show a certain sustained release effect on in vitro drug releasing.

  4. Hydrothermally Synthesized Zinc Sulphide Microspheres for Solar Light-Driven Photocatalytic Properties

    Science.gov (United States)

    Waghadkar, Yogesh; Arbuj, Sudhir; Shinde, Manish; Ballal, Reshma; Rane, Sunit B.; Gosavi, Suresh; Fouad, H.; Chauhan, Ratna

    2018-02-01

    In this work, we reported the synthesis of zinc sulphide microspheres using the hydrothermal method. ZnS microspheres were synthesized using water, zinc acetate, thiourea and ammonia solution at 150°C for 6 h, 12 h, and 24 h. The as-synthesized ZnS powders were characterized by x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and ultraviolet-visible (UV-Vis) spectroscopy. XRD indicates the cubic (major phase) as well as hexagonal (minor phase) crystalline phase with enhanced crystallinity increased gradually with more reaction time. UV-Vis spectra show the absorption peaks in the UV-Vis region for all the samples. The Tauc's plot was used to calculate the band gap energy of ZnS samples, which are found to be 3.39 eV, 3.4 eV, and 3.42 eV for the samples synthesized at reaction times of 6 h, 12 h, and 24 h, respectively. FESEM images confirm the formation of microspheres as aggregates of spherical nanoparticles. The as-synthesized ZnS microspheres have been explored for solar light-induced photo-catalytic dye degradation of methylene blue (MB), and the results confirm that such microspheres exhibit effectual photocatalytic properties.

  5. Transmission electron microscopy and Raman characterization of copper (I) oxide microspheres composed of nanoparticles

    International Nuclear Information System (INIS)

    Wang Wenzhong; Tu Ya; Wang Lijuan; Liang Yujie; Shi Honglong

    2013-01-01

    Highlights: ► Raman spectroscopy of copper (I) oxide microspheres were investigated. ► Infrared active mode is greatly activated in Raman scattering spectrum. ► Infrared active mode shows up in Raman spectrum of copper (I) oxide microspheres. ► The defects existed in spheres could be responsible for the observed Raman property. - Abstract: The high-resolution transmission electron microscope and Raman spectroscopy were used to investigate the microstructures and Raman scattering property of copper (I) oxide microspheres composed of nanoparticles. High-resolution transmission electron microscope images indicate that the copper (I) oxide microspheres are composed of nanoparticles with random growth direction, indicating that there are many defects in microspheres. The Raman spectrum shows that infrared active mode, which must be odd parity and is Raman forbidden for bulk crystal due to its inversion symmetry, is activated and shows up in Raman scattering spectrum. On the basis of investigations of the microstructure features of copper (I) oxide microspheres, we attribute the appearance of IR active mode in Raman scattering spectrum to the breakdown of the symmetry of the lattice due to the presence of defects in the prepared copper (I) oxide microspheres as observed in HRTEM images.

  6. Performance evaluation of bipolar and tripolar excitations during nozzle-jetting-based alginate microsphere fabrication

    Science.gov (United States)

    Herran, C. Leigh; Huang, Yong; Chai, Wenxuan

    2012-08-01

    Microspheres, small spherical (polymeric) particles with or without second phase materials embedded or encapsulated, are important for many biomedical applications such as drug delivery and organ printing. Scale-up fabrication with the ability to precisely control the microsphere size and morphology has always been of great manufacturing interest. The objective of this work is to experimentally study the performance differences of bipolar and tripolar excitation waveforms in using drop-on-demand (DOD)-based single nozzle jetting for alginate microsphere fabrication. The fabrication performance has been evaluated based on the formability of alginate microspheres as a function of materials properties (sodium alginate and calcium chloride concentrations) and operating conditions. The operating conditions for each excitation include voltage rise/fall times, dwell times and excitation voltage amplitudes. Overall, the bipolar excitation is more robust in making spherical, monodispersed alginate microspheres as good microspheres for its wide working range of material properties and operating conditions, especially during the fabrication of highly viscous materials such as the 2% sodium alginate solution. For both bipolar and tripolar excitations, the sodium alginate concentration and the voltage dwell times should be carefully selected to achieve good microsphere formability.

  7. Performance evaluation of bipolar and tripolar excitations during nozzle-jetting-based alginate microsphere fabrication

    International Nuclear Information System (INIS)

    Leigh Herran, C; Huang, Yong; Chai, Wenxuan

    2012-01-01

    Microspheres, small spherical (polymeric) particles with or without second phase materials embedded or encapsulated, are important for many biomedical applications such as drug delivery and organ printing. Scale-up fabrication with the ability to precisely control the microsphere size and morphology has always been of great manufacturing interest. The objective of this work is to experimentally study the performance differences of bipolar and tripolar excitation waveforms in using drop-on-demand (DOD)-based single nozzle jetting for alginate microsphere fabrication. The fabrication performance has been evaluated based on the formability of alginate microspheres as a function of materials properties (sodium alginate and calcium chloride concentrations) and operating conditions. The operating conditions for each excitation include voltage rise/fall times, dwell times and excitation voltage amplitudes. Overall, the bipolar excitation is more robust in making spherical, monodispersed alginate microspheres as good microspheres for its wide working range of material properties and operating conditions, especially during the fabrication of highly viscous materials such as the 2% sodium alginate solution. For both bipolar and tripolar excitations, the sodium alginate concentration and the voltage dwell times should be carefully selected to achieve good microsphere formability. (paper)

  8. Particle size modeling and morphology study of chitosan/gelatin/nanohydroxyapatite nanocomposite microspheres for bone tissue engineering.

    Science.gov (United States)

    Bagheri-Khoulenjani, Shadab; Mirzadeh, Hamid; Etrati-Khosroshahi, Mohammad; Shokrgozar, Mohammad Ali

    2013-06-01

    In this study, nanocomposite microspheres based on chitosan/gelatin/nanohydroxyapatite were fabricated, and effects of the nanohydroxyapatite/biopolymer (chitosan/gelatin) weight ratio (nHA/P), stirring rate, chitosan concentration and biopolymer concentration on the particle size, and morphology of nanocomposite microspheres were investigated. Particle size of microspheres was modeled by design of experiments using the surface response method. Particle size, morphology of microspheres, and distribution of nanoparticles within the composite microspheres were evaluated using an optical microscope, scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. X-ray diffraction and Fourier transform infrared spectroscopy were applied to study the physical and chemical characteristics of microspheres. Results showed that by modulating the nHA/P ratio, chitosan concentration, polymer concentration, and stirring rate, it is possible to fabricate microspheres in wide rages of particle size (5-150 μm). Analysis of variance confirmed that the modified quadratic model can be used to predict the particle size of nanocomposite microspheres within the design space. SEM studies showed that microspheres with different compositions had totally different morphologies from dense morphologies to porous ones. TEM images demonstrated that nanoparticles were distributed uniformly within the polymeric matrix. MTT assay and cell culture studies showed that microspheres with different compositions possessed good biocompatibility. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2013. Copyright © 2012 Wiley Periodicals, Inc.

  9. Pharmacokinetics of Short- and Long-acting Formulations of Oxytetracycline After Intramuscular Administration in Chickens.

    Science.gov (United States)

    Gberindyer, Aondover F; Okpeh, Ene R; Semaka, Asaaga A

    2015-12-01

    Both short- and long-acting formulations of oxytetracycline are commonly used in veterinary medicine to treat animals infected with gram-negative and gram-positive bacteria, rickettsiae, mycoplasma, and chlamydiae. To compare pharmacokinetics of short- and long-acting oxytetracycline in chickens, injectable formulations from the same pharmaceutical company were administered to healthy 6-week-old broiler chickens in accordance to the labeled instructions. Fourteen chickens were separated into 2 groups: chickens in group A (n = 7) were administered the short-acting formulation (10 mg/kg IM q24h) for 4 consecutive days, whereas those in group B (n = 7) were treated with a single dose (20 mg/kg IM) of the long-acting formulation. Blood samples were collected into heparinized tubes before and at 0.25, 0.5, 1, 1.5, 2, 4, 6, 8, 10, and 24 hours after initial treatment. Thereafter, blood samples were taken every 24 hours up to 120 hours. Plasma concentrations of oxytetracycline were determined by competitive enzyme-linked immunoabsorbent assay, and pharmacokinetic parameters were obtained. Both formulations delivered therapeutic plasma concentrations of oxytetracycline for approximately 100% of their respective dosing intervals as recommended. However, considering the additional labor, patient stress, and mortalities associated with handling, in addition to rejection of the carcass due to tissue necrosis resulting from multiple injections, we recommend use of the long-acting instead of the short-acting injectable formulation in broiler chickens.

  10. Preparation and characterization of gelatin–hydroxyapatite composite microspheres for hard tissue repair

    Energy Technology Data Exchange (ETDEWEB)

    Chao, Shao Ching [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Road, Taichung 40227, Taiwan (China); Department of Minimally Invasive Skull Neurosurgery, Neurological Institute, Taichung Veterans General Hospital, 1650 Taiwan Boulevard, Sect. 4, Taichung, Taiwan (China); Department of Neurosurgery, ChangHua Hospital, Ministry of Health and Welfare, 80 Chung Cheng Road, Sect. 2 Chiu Kuan Village, Changhua 500, Taiwan (China); Wang, Ming-Jia; Pai, Nai-Su [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Road, Taichung 40227, Taiwan (China); Yen, Shiow-Kang, E-mail: skyen@dragon.nchu.edu.tw [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo-Kuang Road, Taichung 40227, Taiwan (China)

    2015-12-01

    Gelatin–hydroxyapatite composite microspheres composed of 21% gelatin (G) and 79% hydroxyapatite (HA) with uniform morphology and controllable size were synthesized from a mixed solution of Ca(NO{sub 3}){sub 2}, NH{sub 4}H{sub 2}PO{sub 4} and gelatin by a wet-chemical method. Material analyses such as X-ray diffraction (XRD), scanning/transmission electron microscopy examination (SEM/TEM) and inductively coupled plasma-mass spectroscopy (ICP-MS) were used to characterize G–HA microspheres by analyzing their crystalline phase, microstructure, morphology and composition. HA crystals precipitate along G fibers to form nano-rods with diameters of 6–10 nm and tangle into porous microspheres after blending. The cell culture indicates that G–HA composite microspheres without any toxicity could enhance the proliferation and differentiation of osteoblast-like cells. In a rat calvarial defect model, G–HA bioactive scaffolds were compared with fibrin glue (F) and Osteoset® Bone Graft Substitute (OS) for their capacity of regenerating bone. Four weeks post-implantation, new bone, mineralization, and expanded blood vessel area were found in G–HA scaffolds, indicating greater osteoconductivity and bioactivity than F and OS. - Highlights: • G–HA composite microspheres were prepared by hydroxyapatite and gelatin. • In vitro tests indicated that the G–HA microspheres were biocompatible and bioactive. • In in vitro tests, G–HA microspheres could be applied in hard tissue engineering. • G–HA had healed the bone defect and provides a high proportion of surface area to open space.

  11. Preparation And Biodistribution Study Of 153sm-Albumin Microspheres As Radiosynovectomy Agent

    International Nuclear Information System (INIS)

    W, Widyatuti; Tamat, Swasono R.; Indrawati, Teti; Fatimah; Aulya, Anna

    2003-01-01

    Treatment of rheumatics arthritis previously was done by inflamed synovial membrane surgery called synovectomy. The conventional synovectomy was costly and inconvenient method for the patients, therefore alternative method using radiation synovectomy was considered. Preparation of 153 Sm albumin microspheres as radio synovectomy agent has been candied out. Experiments have been carried out to decide optimal conditions of preparation, such as speed and time of stirring to form microspheres, and to find optimal condition in labelling the microspheres, such as pH, content of sodium citrate, samarium oxide and the amount of microspheres. The albumin particles were expected as spheres with 15-50 μm in diameter, high labelling efficiency and 153 Sm is strongly bound to the microspheres. In-vitro and in-vivo stability were tested by observing 153 Sm released from the particles after incubating the labelled particles in saline and human serum albumin solution for one week, and after administration of labelled particles into Wistar rats via intraarticular injection through one of its knee joint. The result shows the optimal speed and time of stirring to obtain desired shape and size of the particles was 750 rpm in 15 minutes, while the optimal formulation to obtain high labelling efficiency was at pH 5-6, containing 10 μg/mL of sodium citrate, 125 μg/mL of samarium oxide and 10 mg of albumin microspheres. The preparation was stable up to 5 days. In conclusion the 153 Sm-albumin microspheres can be produced and is ready for clinical trial

  12. Polymer blends used to develop felodipine-loaded hollow microspheres for improved oral bioavailability.

    Science.gov (United States)

    Pi, Chao; Feng, Ting; Liang, Jing; Liu, Hao; Huang, Dongmei; Zhan, Chenglin; Yuan, Jiyuan; Lee, Robert J; Zhao, Ling; Wei, Yumeng

    2018-06-01

    Felodipine (FD) has been widely used in anti-hypertensive treatment. However, it has extremely low aqueous solubility and poor bioavailability. To address these problems, FD hollow microspheres as multiple-unit dosage forms were synthesized by a solvent diffusion evaporation method. Particle size of the hollow microspheres, types of ethylcellulose (EC), amounts of EC, polyvinyl pyrrolidone (PVP) and FD were investigated based on an orthogonal experiment of three factors and three levels. In addition, the release kinetics in vitro and pharmacokinetics in beagle dogs of the optimized FD hollow microspheres was investigated and compared with Plendil (commercial FD sustained-release tablets) as a single-unit dosage form. Results showed that the optimal formulation was composed of EC 10 cp :PVP:FD (0.9:0.16:0.36, w/w). The FD hollow microspheres were globular with a hollow structure and have high drug loading (17.69±0.44%) and floating rate (93.82±4.05%) in simulated human gastric fluid after 24h. Pharmacokinetic data showed that FD hollow microspheres exhibited sustained-release behavior and significantly improved relative bioavailability of FD compared with the control. Pharmacodynamic study showed that the FD hollow microspheres could effectively lower blood pressure. Therefore, these findings demonstrated that the hollow microspheres were an effective sustained-release delivery system for FD. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. Uptake of long-acting reversible contraceptive devices in Western ...

    African Journals Online (AJOL)

    Background: The contraceptive method has become an essential factor in the life of most women of reproductive age group; although it varies in different stages of their life course. The use of long acting reversible methods (LARC) is proposed as a strategy to reverse undesirable maternal health consequences in ...

  14. A Comparison Study of Quetiapine and Risperidone's Effectiveness and Safety on Treating Alcohol-induced Mental Disorder.

    Science.gov (United States)

    Lv, Bei; Duan, Haishui

    2016-08-25

    Compared with Risperidone, Quetiapine's effectiveness and safety on treating alcohol-induced mental disorder is still unclear. To investigate the clinical effectiveness and safety of Quetiapine on treating alcohol-induced mental disorder. One hundred and forty-eight patients with alcohol-induced mental disorder were divided into the experimental group (75 patients) and the control group (73 patients) by the treatments they received. The patients in the experimental group were treated with Quetiapine by taking it three times per day orally. The mean (sd) maintenance dose was 151.2(27.3) mg/d, and the treatment cycle was 6 weeks. Patients in the control group received Risperidone once per day orally with a mean (sd) maintenance dose being 2.3(0.9) mg/d, and the treatment cycle was 6 weeks as well. The PANSS scale was used to assess patients' before and after treatment. The researchers also observed any adverse reactions in both treatment strategies and evaluated the effectiveness and safety of both treatment strategies. The mean (sd) PANSS scale score of the experimental group after two weeks of treatment was 71.9 (10.2), which was clearly better than the mean (sd) score before treatment (82.6 [11.4]), and was significantly better than the control group's mean (sd) score after two weeks (76.5[12.8]). Also, the experimental group's scores after 4 weeks of treatment and 6 weeks of treatment were significantly better than the control group. The experimental group's efficacy rate (94.7%) was higher than the control group's (90.4%); the cure rate of the experimental group (33.3%) was higher than that of the control group (24.7%), and the difference was statistically significant. The rates of adverse reactions in the experimental and control groups were 13.3% and 19.2% respectively, and they were significantly different from each other. Treating alcohol-induced mental disorder with Quetiapine is more effective than treating it with Risperidone. Quetiapine can improve

  15. Comparison between the efficacies of Risperidone with Haloperidol in the treatment of attention-deficit hyperactivity disorder (ADHD) among preschoolers: a randomized double-blind clinical trial.

    Science.gov (United States)

    Riahi, Forough; Tashakori, Ashraf; Abdi, Leila

    2016-09-01

    Attention-deficit hyperactivity disorder (ADHD) is a common psychiatric disease with a worldwide pooled prevalence of 5.29%. To compare the efficacy of Risperidone with Haloperidol in the treatment of attention-deficit hyperactivity disorder (ADHD) among 3- to 6-year-old children. In a 6-week double-blind clinical trial, the efficacy of Risperidone 0.5-2 mg with a dose of maximum Haloperidol 0.075 mg/kg was assessed in 39 children aged 3-6 years. This study was conducted at the Golestan Psychiatric Clinic (Ahvaz, Iran). Measurement tools included the Conners' Parent Rating Scale (CPRS-48), Children's Global Assessment Scale (CGAS), and the Attention Deficit Hyperactivity Disorder Rating Scale (ADHD-RS). Data were analyzed using the Wilcoxon, Mann-Whitney, and Fisher's exact tests in the SPSS 19. During the 6 weeks, the decline in points was seen in Conner's rating scale and in ADHD-RS score in Risperidone and Haloperidol groups (pscale, an increase of performance in both groups for six weeks was statistically significant (pscales of ADHD-RS and CPRS-48, no statistically significant difference was observed between the two treatment groups; i.e., in terms of reducing the rate during weeks of two, four, and six (p>0.05). Haloperidol and Risperidone possibly can be an acceptable treatment choice in the ADHD treatment of 3- to 6-year-old children. The trial was registered at the Iranian Registry of Clinical Trials (http://www.irct.ir) with the Irct ID: IRCT2015082623766N1. This work was financially supported by grant (ref. no.: U-93130) from the vice chancellor for Research Affairs of Ahvaz Jundishapur University of Medical Sciences.

  16. Design of sustained-release nitrendipine microspheres having solid dispersion structure by quasi-emulsion solvent diffusion method

    DEFF Research Database (Denmark)

    Cui, Fude; Yang, Mingshi; Jiang, Yanyan

    2003-01-01

    crystallization technique, i.e. quasi-emulsion solvent diffusion method. The factors of effect on micromeritic properties and release profiles of the resultant microspheres were investigated. And the bioavailability of nitrendipine microspheres was evaluated in six healthy dogs. The results showed...... that the particle size of microspheres was determined mainly by the agitation speed. The dissolution rate of nitrendipine from microspheres was enhanced significantly with increasing the amount of dispersing agents, and sustained by adding retarding agents. The release rate of microspheres could be controlled...

  17. Sustained release of simvastatin from hollow carbonated hydroxyapatite microspheres prepared by aspartic acid and sodium dodecyl sulfate.

    Science.gov (United States)

    Wang, Ke; Wang, Yinjing; Zhao, Xu; Li, Yi; Yang, Tao; Zhang, Xue; Wu, Xiaoguang

    2017-06-01

    Hollow carbonated hydroxyapatite (HCHAp) microspheres as simvastatin (SV) sustained-release vehicles were fabricated through a novel and simple one-step biomimetic strategy. Firstly, hollow CaCO 3 microspheres were precipitated through the reaction of CaCl 2 with Na 2 CO 3 in the presence of aspartic acid and sodium dodecyl sulfate. Then, the as-prepared hollow CaCO 3 microspheres were transformed into HCHAp microspheres with a controlled anion-exchange method. The HCHAp microspheres were 3-5μm with a shell thickness of 0.5-1μm and were constructed of short needle nanoparticles. The HCHAp microspheres were then loaded with SV, exhibiting excellent drug-loading capacity and sustained release properties. These results present a new material synthesis strategy for HCHAp microspheres and suggest that the as-prepared HCHAp microspheres are promising for applications in drug delivery. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Encapsulation of azithromycin into polymeric microspheres by reduced pressure-solvent evaporation method

    DEFF Research Database (Denmark)

    Li, Xiujuan; Chang, Si; Du, Guangsheng

    2012-01-01

    Azithromycin loaded microspheres with blends of poly-l-lactide and ploy-D,L-lactide-co-glycolide as matrices were prepared by the atmosphere-solvent evaporation (ASE) and reduced pressure-solvent evaporation (RSE) method. Both the X-ray diffraction spectra and DSC thermographs demonstrated...... characteristics and release profiles of microspheres. In conclusion, the overall improvement of microspheres in appearance, encapsulation efficiency and controlled drug release through the RSE method could be easily fulfilled under optimal preparation conditions....

  19. A new rat model of portal hypertension induced by intraportal injection of microspheres

    Science.gov (United States)

    Li, Xiang-Nong; Benjamin, IS; Alexander, B

    1998-01-01

    AIM: To produce a new rat model of portal hypertension by intraportal injection of microspheres. METHODS: Measured aliquots of single or different-sized microspheres (15, 40, 80μm) were injected into the portal vein to block intrahepatic portal radicals. The resultant changes in arterial,portal,hepatic venous and splenic pulp pressures were monitored. The liver and lungs were excised for histological examination. RESULTS: Portal venous pressure was elevated from basal value of 0.89-1.02 kPa to a steady-state of 1.98-3.19 kPa following the sequential injections of single- or different-sized microspheres, with a markedly lowered mean arterial pressure. However, a small-dose injection of 80 μm microspheres (1.8 × 105) produced a steady-state portal venous pressure of 2.53 × 0.17 kPa, and all rats showed normal arterial pressures. In addition, numerous microspheres were found in the lungs in all experimental groups. CONCLUSION: Portal hypertension can be reproduced in rats by intraportal injection of microspheres at a small dose of 80 μm (1.8 × 105). Intrahepatic portal-systemic shunts probably exist in the normal rat liver. PMID:11819236

  20. Synthesis and photocatalytic properties of different SnO2 microspheres on graphene oxide sheets

    International Nuclear Information System (INIS)

    Wei, Jia; Xue, Shaolin; Xie, Pei; Zou, Rujia

    2016-01-01

    Highlights: • Different SnO 2 microspheres were grown on GOs by hydrothermal method. • The morphology was influenced by volume ratio of ethanol and concentrations of precursor. • The shape of SnO 2 microspheres looks like dand