Delamination tolerance studies in laminated composite panels

Indian Academy of Sciences (India)

Abstract. Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain. Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria.

Thermally induced delamination of multilayers

DEFF Research Database (Denmark)

Sørensen, Bent F.; Sarraute, S.; Jørgensen, O.

1998-01-01

Steady-state delamination of multilayered structures, caused by stresses arising during processing due to thermal expansion mismatch, is analyzed by a fracture mechanics model based on laminate theory. It is found that inserting just a few interlayers with intermediate thermal expansion coefficie...... coefficients may be an effective way of reducing the delamination energy release rate. Uneven layer thickness and increasing elastic mismatch are shown to raise the energy release rate. Experimental work confirms important trends of the model.......Steady-state delamination of multilayered structures, caused by stresses arising during processing due to thermal expansion mismatch, is analyzed by a fracture mechanics model based on laminate theory. It is found that inserting just a few interlayers with intermediate thermal expansion...

Study on Fatigue Performance of Composite Bolted Joints with Bolt-Hole Delamination

Science.gov (United States)

Liu, M. J.; Yu, S.; Zhao, Q. Y.

2018-03-01

Fatigue performance of composite structure with imperfections is a challenging subject at present. Based on cohesive zone method and multi-continuum theory, delamination evolution response and fatigue life prediction of a 3D composite single-lap joint with a bolt-hole have been investigated through computer codes Abaqus and Fe-safe. Results from the comparison of a perfect composite bolted joint with another defect one indicates that a relatively small delamination damage around the bolt hole brings about significant degradation of local material performance. More notably, fatigue life of stress concentration region of composite bolted joints is highly sensitive to external loads, as an increase of 67% cyclic load amplitude leads to an decrease of 99.5% local fatigue life in this study. However, the numerical strategy for solving composite fatigue problems is meaningful to engineering works.

Predictions of Poisson's ratio in cross-ply laminates containing matrix cracks and delaminations

Science.gov (United States)

Harris, Charles E.; Allen, David H.; Nottorf, Eric W.

1989-01-01

A damage-dependent constitutive model for laminated composites has been developed for the combined damage modes of matrix cracks and delaminations. The model is based on the concept of continuum damage mechanics and uses second-order tensor valued internal state variables to represent each mode of damage. The internal state variables are defined as the local volume average of the relative crack face displacements. Since the local volume for delaminations is specified at the laminate level, the constitutive model takes the form of laminate analysis equations modified by the internal state variables. Model implementation is demonstrated for the laminate engineering modulus E(x) and Poisson's ratio nu(xy) of quasi-isotropic and cross-ply laminates. The model predictions are in close agreement to experimental results obtained for graphite/epoxy laminates.

Buckling-driven delamination growth in composite laminates: Guidelines for assessing the threat posed by interlaminar matrix delamination

DEFF Research Database (Denmark)

Bhushan, Karihaloo; Stang, Henrik

2008-01-01

This paper is concerned with development of a simple procedure to assess the threat posed by interlaminar matrix delaminations to the integrity of composite laminates when they are situated in a compressive stress field. Depending upon the size of the delamination, its location below the surface...

Delamination Detection of Reinforced Concrete Decks Using Modal Identification

Directory of Open Access Journals (Sweden)

Shutao Xing

2012-01-01

Full Text Available This study addressed delamination detection of concrete slabs by analyzing global dynamic responses of structures. Both numerical and experimental studies are presented. In the numerical examples, delaminations with different sizes and locations were introduced into a concrete slab; the effects of presence, sizes, and locations of delaminations on the modal frequencies and mode shapes of the concrete slab under various support conditions were studied. In the experimental study, four concrete deck specimens with different delamination sizes were constructed, and experimental tests were conducted. Traditional peak-picking, frequency domain decomposition, and stochastic subspace identification methods were applied to the modal identification from dynamic response measurements. The modal parameters identified by these three methods correlated well. The changes in modal frequencies, damping ratios, and mode shapes that were extracted from the dynamic measurements were investigated and correlated to the actual delaminations and can indicate presence and severity of delamination. Finite element (FE models of reinforced concrete decks with different delamination sizes and locations were established. The modal parameters computed from the FE models were compared to those obtained from the laboratory specimens, and the FE models were validated. The delamination detection approach was proved to be effective for concrete decks on beams.

THE EFFECT OF SUPPORT PLATE ON DRILLING-INDUCED DELAMINATION

Directory of Open Access Journals (Sweden)

Navid Zarif Karimi

2016-02-01

Full Text Available Delamination is considered as a major problem in drilling of composite materials, which degrades the mechanical properties of these materials. The thrust force exerted by the drill is considered as the major cause of delamination; and one practical approach to reduce delamination is to use a back-up plate under the specimen. In this paper, the effect of exit support plate on delamination in twist drilling of glass fiber reinforced composites is studied. Firstly, two analytical models based on linear fracture mechanics and elastic bending theory of plates are described to find critical thrust forces at the beginning of crack growth for drilling with and without back-up plate. Secondly, two series of experiments are carried out on glass fiber reinforced composites to determine quantitatively the effect of drilling parameters on the amount of delamination. Experimental findings verify a large reduction in the amount of delaminated area when a back-up plate is placed under the specimen.

Piecewise Delamination Drives Uplift in the Atlas Mountains Region of Morocco

Science.gov (United States)

Bezada, M. J.; Humphreys, E.; Martin Davila, J.; mimoun, H.; Josep, G.; Palomeras, I.

2013-12-01

The elevation of the intra-continental Atlas Mountains of Morocco and surrounding regions requires a mantle component of buoyancy, and there is consensus that this buoyancy results from an abnormally thin lithosphere. Lithospheric delamination under the Atlas Mountains and thermal erosion caused by upwelling mantle have each been suggested as thinning mechanisms. We use seismic tomography to image the upper mantle of Morocco by inverting teleseimic p-wave delay times, complemented with local delays, recorded on a dense array of stations in the Iberian peninsula and Morocco. A surface wave model provides constraint on the shallower layers. We determine the geometry of lithospheric cavities and mantle upwelling beneath the Middle Atlas and central High Atlas, and image delaminated lithosphere at ~400 km beneath the Middle Atlas. We propose discontinuous delamination of an intrinsically unstable Atlas lithosphere, enabled by the presence of anomalously hot mantle, as a mechanism for producing the imaged structures. The Atlas lithosphere was made unstable by a combination of tectonic shortening and eclogite loading during Mesozoic rifting and Cenozoic magmatism. The presence of hot mantle, sourced from regional upwellings in northern Africa or the Canary Islands, enabled the mobilization of this lithosphere. Flow around the retreating Alboran slab focused upwelling mantle under the Middle Atlas, where we image the most recent delamination. The Atlas Mountains of Morocco stand as an example of mantle-generated uplift and large-scale lithospheric loss in a mildly contractional orogen.

Guided Wave Delamination Detection and Quantification With Wavefield Data Analysis

Science.gov (United States)

Tian, Zhenhua; Campbell Leckey, Cara A.; Seebo, Jeffrey P.; Yu, Lingyu

2014-01-01

Unexpected damage can occur in aerospace composites due to impact events or material stress during off-nominal loading events. In particular, laminated composites are susceptible to delamination damage due to weak transverse tensile and inter-laminar shear strengths. Developments of reliable and quantitative techniques to detect delamination damage in laminated composites are imperative for safe and functional optimally-designed next-generation composite structures. In this paper, we investigate guided wave interactions with delamination damage and develop quantification algorithms by using wavefield data analysis. The trapped guided waves in the delamination region are observed from the wavefield data and further quantitatively interpreted by using different wavenumber analysis methods. The frequency-wavenumber representation of the wavefield shows that new wavenumbers are present and correlate to trapped waves in the damage region. These new wavenumbers are used to detect and quantify the delamination damage through the wavenumber analysis, which can show how the wavenumber changes as a function of wave propagation distance. The location and spatial duration of the new wavenumbers can be identified, providing a useful means not only for detecting the presence of delamination damage but also allowing for estimation of the delamination size. Our method has been applied to detect and quantify real delamination damage with complex geometry (grown using a quasi-static indentation technique). The detection and quantification results show the location, size, and shape of the delamination damage.

Finite elements modeling of delaminations in composite laminates

DEFF Research Database (Denmark)

Gaiotti, m.; Rizzo, C.M.; Branner, Kim

2011-01-01

of the buckling strength of composite laminates containing delaminations. Namely, non-linear buckling and post-buckling analyses are carried out to predict the critical buckling load of elementary composite laminates affected by rectangular delaminations of different sizes and locations, which are modelled......The application of composite materials in many structures poses to engineers the problem to create reliable and relatively simple methods, able to estimate the strength of multilayer composite structures. Multilayer composites, like other laminated materials, suffer from layer separation, i.......e., delaminations, which may affect the stiffness and stability of structural components. Especially deep delaminations in the mid surface of laminates are expected to reduce the effective flexural stiffness and lead to collapse, often due to buckling behaviour. This paper deals with the numerical modelling...

Edge Delamination of Monolayer Transition Metal Dichalcogenides.

Science.gov (United States)

Ly, Thuc Hue; Yun, Seok Joon; Thi, Quoc Huy; Zhao, Jiong

2017-07-25

Delamination of thin films from the supportive substrates is a critical issue within the thin film industry. The emergent two-dimensional, atomic layered materials, including transition metal dichalcogenides, are highly flexible; thus buckles and wrinkles can be easily generated and play vital roles in the corresponding physical properties. Here we introduce one kind of patterned buckling behavior caused by the delamination from a substrate initiated at the edges of the chemical vapor deposition synthesized monolayer transition metal dichalcogenides, led by thermal expansion mismatch. The atomic force microscopy and optical characterizations clearly showed the puckered structures associated with the strain, whereas the transmission electron microscopy revealed the special sawtooth-shaped edges, which break the geometrical symmetry for the buckling behavior of hexagonal samples. The condition of the edge delamination is in accordance with the fracture behavior of thin film interfaces. This edge delamination and buckling process is universal for most ultrathin two-dimensional materials, which requires more attention in various future applications.

Delamination of Compressed Thin Layers at Corners

DEFF Research Database (Denmark)

Sørensen, Kim D.; Jensen, Henrik Myhre; Clausen, Johan

2008-01-01

An analysis of delamination for a thin elastic layer under compression, attached to a substrate at a corner is carried out. The analysis is performed by combining results from interface fracture mechanics and the theory of thin shells. In contrast with earlier results for delamination on a flat...

Experimental evaluation of coating delamination in vinyl coated metal forming

International Nuclear Information System (INIS)

Son, Young Ki; Lee, Chan Joo; Kim, Byung Min; Lee, Jung Min; Byoen, Sang Doek; Lee, Soen Bong

2012-01-01

In this paper, a new evaluation and prediction method for coating delamination during sheet metal forming is presented. On the basis of the forming limit diagram (FLD), the current study evaluates the delamination of PET coating by using a cross cut specimen, dome test, and rectangular cup drawing test. Dome test specimens were subjected to biaxial, plane strain, and uniaxial deformation modes. Rectangular cup drawing test specimens were subjected to the deep drawing deformation mode, and compression deformation mode. A vinyl coated metal (VCM) sheet consists of three layers of polymer on the sheet metals: a protective film, a PET layer and a PVC layer. The areas with coating delamination were identified, and the results of the evaluation were plotted according to major and minor strain values, depicting coating delamination. The constructed delamination limit diagram (DLD) can be used to determine the forming limit of VCM during the complex press forming process. ARGUS (GOM) was employed to identify the strain value and deformation mode of the delaminated surface after the press forming. After identifying the areas of delamination, the DLD of the PET coating can be constructed in a format similar to that of the FLD. The forming limit of the VCM sheet can be evaluated using the superimposition of the delamination limit strain of the coating onto the FLD of VCM sheet. The experimental results showed that the proposed test method will support the sheet metal forming process design for VCM sheets. The assessment method presented in this study can be used to determine the delamination limit strain under plastic deformation of other polymer coated metals. The experimental results suggested that the proposed testing method is effective in evaluating delamination for specific applications

Experimental evaluation of coating delamination in vinyl coated metal forming

Energy Technology Data Exchange (ETDEWEB)

Son, Young Ki; Lee, Chan Joo; Kim, Byung Min [Pusan National Univ., Busan (Korea, Republic of); Lee, Jung Min [Korea Institute of Industrial Technology, Busan (Korea, Republic of); Byoen, Sang Doek [HA Digital Engineering Gr., Seongsan Gu (Korea, Republic of); Lee, Soen Bong [Keimyung Univ., Daegu (Korea, Republic of)

2012-10-15

In this paper, a new evaluation and prediction method for coating delamination during sheet metal forming is presented. On the basis of the forming limit diagram (FLD), the current study evaluates the delamination of PET coating by using a cross cut specimen, dome test, and rectangular cup drawing test. Dome test specimens were subjected to biaxial, plane strain, and uniaxial deformation modes. Rectangular cup drawing test specimens were subjected to the deep drawing deformation mode, and compression deformation mode. A vinyl coated metal (VCM) sheet consists of three layers of polymer on the sheet metals: a protective film, a PET layer and a PVC layer. The areas with coating delamination were identified, and the results of the evaluation were plotted according to major and minor strain values, depicting coating delamination. The constructed delamination limit diagram (DLD) can be used to determine the forming limit of VCM during the complex press forming process. ARGUS (GOM) was employed to identify the strain value and deformation mode of the delaminated surface after the press forming. After identifying the areas of delamination, the DLD of the PET coating can be constructed in a format similar to that of the FLD. The forming limit of the VCM sheet can be evaluated using the superimposition of the delamination limit strain of the coating onto the FLD of VCM sheet. The experimental results showed that the proposed test method will support the sheet metal forming process design for VCM sheets. The assessment method presented in this study can be used to determine the delamination limit strain under plastic deformation of other polymer coated metals. The experimental results suggested that the proposed testing method is effective in evaluating delamination for specific applications.

Integrated global digital image correlation for interface delamination characterization

KAUST Repository

Hoefnagels, Johan P.M.

2013-07-23

Interfacial delamination is a key reliability challenge in composites and micro-electronic systems due to (high-density) integration of dissimilar materials. Predictive finite element models are used to minimize delamination failures during design, but require accurate interface models to capture (irreversible) crack initiation and propagation behavior observed in experiments. Therefore, an Integrated Global Digital Image Correlation (I-GDIC) strategy is developed for accurate determination of mechanical interface behavior from in-situ delamination experiments. Recently, a novel miniature delamination setup was presented that enables in-situ microscopic characterization of interface delamination while sensitively measuring global load-displacement curves for all mode mixities. Nevertheless, extraction of detailed mechanical interface behavior from measured images is challenging, because deformations are tiny and measurement noise large. Therefore, an advanced I-GDIC methodology is developed which correlates the image patterns by only deforming the images using kinematically-admissible \\'eigenmodes\\' that correspond to the few parameters controlling the interface tractions in an analytic description of the crack tip deformation field, thereby greatly enhancing accuracy and robustness. This method is validated on virtual delamination experiments, simulated using a recently developed self-adaptive cohesive zone (CZ) finite element framework. © The Society for Experimental Mechanics, Inc. 2014.

Non-destructive delamination detection in solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Gazzarri, J.I.; Kesler, O. [Department of Mechanical Engineering, University of British Columbia, 2054-6250 Applied Science Lane, Vancouver, BC V6T 1Z4 (Canada)

2007-05-15

A finite element model has been developed to simulate the steady state and impedance behaviour of a single operating solid oxide fuel cell (SOFC). The model results suggest that electrode delamination can be detected minimally-invasively by using electrochemical impedance spectroscopy. The presence of cathode delamination causes changes in the cell impedance spectrum that are characteristic of this type of degradation mechanism. These changes include the simultaneous increase in both the series and polarization resistances, in proportion to the delaminated area. Parametric studies show the dependence of these changes on the extent of delamination, on the operating point, and on the kinetic characteristics of the fuel cell under study. (author)

A thick level set interface model for simulating fatigue-drive delamination in composites

NARCIS (Netherlands)

Latifi, M.; Van der Meer, F.P.; Sluys, L.J.

2015-01-01

This paper presents a new damage model for simulating fatigue-driven delamination in composite laminates. This model is developed based on the Thick Level Set approach (TLS) and provides a favorable link between damage mechanics and fracture mechanics through the non-local evaluation of the energy

Disruptions in adaptation of sudden-onset and slow-onset risks: insights from a local case in the Andes of Peru for global policies

Science.gov (United States)

Huggel, Christian; Carey, Mark; Frey, Holger; Jurt, Christine; Mechler, Reinhard; Motschmann, Alina; Vicuña, Luis

2017-04-01

Climatic changes involve emergence and changes of both sudden-onset and slow-onset risks. In the field of disaster risk reduction a solid range of strategies and measures has been developed to address sudden-onset risks such as floods, mass movements or storms. Comparably less experience is available for management of slow-onset risks. While, for instance, drought prone regions do have important knowledge how to cope with such conditions in other regions where climatic changes have induced new challenges and risks there is limited experience about how to adapt to slow-onset processes and risks. Examples are impacts of sea level rise in coastal regions or glacier shrinkage in mountain regions. The lack of understanding of how to address impacts from slow-onset processes has recently also been highlighted by the Executive Committee of the Warsaw International Mechanism on Loss and Damage (WIM) acting under the United Nations Framework Convention on Climate Change (UNFCCC). In climate change science, practice and policy it is often assumed that risk management and climate change adaptation would see a seamless continuum when addressing both sudden-onset and slow-onset risks. Here we draw on recent experiences from the Andes of Peru showing that management of, and adaptation to combined sudden-onset and slow-onset impacts of climate change may involve serious social disruption. Carhuaz, a city in the Cordillera Blanca of Peru with a number of local communities pertaining to it, is affected by multiple effects of climate change and glacier shrinkage. After a flood event from glacier lake 513 a flood early warning system has been developed and installed. Multiple use and demand of glacier melt water makes water resource management a challenge and conflicts arise especially during the dry season when water is scarce. The drought at the end of 2016 over much of the tropical Andes has resulted in a situation where local communities started to vigorously and violently turn

Laser Structuring of Thin Layers for Flexible Electronics by a Shock Wave-induced Delamination Process

Science.gov (United States)

Lorenz, Pierre; Ehrhardt, Martin; Zimmer, Klaus

The defect-free laser-assisted structuring of thin films on flexible substrates is a challenge for laser methods. However, solving this problem exhibits an outstanding potential for a pioneering development of flexible electronics. Thereby, the laser-assisted delamination method has a great application potential. At the delamination process: the localized removal of the layer is induced by a shock wave which is produced by a laser ablation process on the rear side of the substrate. In this study, the thin-film patterning process is investigated for different polymer substrates dependent on the material and laser parameters using a KrF excimer laser. The resultant structures were studied by optical microscopy and white light interferometry (WLI). The delamination process was tested at different samples (indium tin oxide (ITO) on polyethylene terephthalate (PET), epoxy-based negative photoresist (SU8) on polyimide (PI) and indium tin oxide/copper indium gallium selenide/molybdenum (ITO/CIGS/Mo) on PI.

Failure analysis of multiple delaminated composite plates due

Indian Academy of Sciences (India)

The present work aims at the first ply failure analysis of laminated composite plates with arbitrarily located multiple delaminations subjected to transverse static load as well as impact. The theoretical formulation is based on a simple multiple delamination model. Conventional first order shear deformation is assumed using ...

Numerical investigation of the effect of delaminations on fracture characteristics of glare

Science.gov (United States)

Bhat, Sunil; Narayanan, S.

2013-10-01

A finite element examination of the effect of delaminations on fracture characteristics of fibre metal laminate (Glare), by comparing energy release rates of normal cracks in laminates with and without delaminations, is presented in the paper. Glare comprising thin cracked 2024-T3 aerospace aluminum alloy layers alternately bonded with E-glass fibre based composite prepregs is considered for the analysis. Delaminations are modeled with interface cohesive elements. Energy release rates of normal cracks in laminates with delaminations are found to be higher than those in the laminates without delaminations.

Numerical Investigation of Delamination in Drilling of Carbon Fiber Reinforced Polymer Composites

Science.gov (United States)

Tang, Wenliang; Chen, Yan; Yang, Haojun; Wang, Hua; Yao, Qiwei

2018-03-01

Drilling of carbon fiber reinforced polymer (CFRP) is a challenging task in modern manufacturing sector and machining induced delamination is one of the major problems affecting assembly precision. In this work, a new three-dimensional (3D) finite element model is developed to study the chip formation and entrance delamination in drilling of CFRP composites on the microscopic level. Fiber phase, matrix phase and equivalent homogeneous phase in the multi-phase model have different constitutive behaviors, respectively. A comparative drilling test, in which the cement carbide drill and unidirectional CFRP laminate are employed, is conducted to validate the proposedmodel in terms of the delamination and the similar changing trend is obtained. Microscopic mechanism of entrance delamination together with the chip formation process at four special fiber cutting angles (0°, 45°, 90° and 135°) is investigated. Moreover, the peeling force is also predicted. The results show that the delamination occurrence and the chip formation are both strongly dependent on the fiber cutting angle. The length of entrance delamination rises with increasing fiber cutting angles. Negligible delamination at 0° is attributed to the compression by the minor flank face. For 45° and 90°, the delamination resulted from the mode III fracture. At 135°, serious delamination which is driven by the mode I and III fractures is more inclined to occur and the peeling force reaches its maximum. Such numerical models can help understand the mechanism of hole entrance delamination further and provide guidance for the damage-free drilling of CFRP.

Study of multilayer packaging delamination mechanisms using different surface analysis techniques

Energy Technology Data Exchange (ETDEWEB)

Garrido-Lopez, Alvaro [Department of Chemistry, University of La Rioja, C/Madre de Dios 51, E-26006 Logrono, La Rioja (Spain); Tena, Maria Teresa, E-mail: maria-teresa.tena@unirioja.es [Department of Chemistry, University of La Rioja, C/Madre de Dios 51, E-26006 Logrono, La Rioja (Spain)

2010-04-01

Multilayer packaging, consisting of different layers joined by using an adhesive or an extrusion process, is widely used to promote different products, such as food, cosmetics, etc. The main disadvantage in using this form of packaging is the delamination process. In this work, different surface techniques (X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy and attenuated total reflection Fourier transform infrared spectroscopy) are used to analyse the delaminated surfaces in order to study the mechanisms that cause delamination of multilayer packaging. According to our results, the reaction of migrated molecules with adhesive-aluminium bonds is the main cause of the chemical delamination process. In contrast, the delamination of extruded materials would seem to be caused by the breaking of Van der Waals bonds.

Critical current survival in the YBCO superconducting layer of a delaminated coated conductor

Science.gov (United States)

Feng, Feng; Fu, Qishu; Qu, Timing; Mu, Hui; Gu, Chen; Yue, Yubin; Wang, Linli; Yang, Zhirong; Han, Zhenghe; Feng, Pingfa

2018-04-01

A high-temperature superconducting coated conductor can be practically applied in electric equipment due to its favorable mechanical properties and critical current (I c) performance. However, the coated conductor can easily delaminate because of its poor stress tolerance along the thickness direction. It would be interesting to investigate whether the I c of the delaminated YBa2Cu3O7-δ (YBCO) layer can be preserved. In this study, coated conductor samples manufactured through the metal organic deposition route were delaminated by liquid nitrogen immersion. Delaminated samples, including the YBCO layer and silver stabilizer, were obtained. Delamination occurred inside the YBCO layer and near the YBCO-CeO2 interface, as suggested by the results of scanning electron microscopy (SEM) and x-ray diffraction. A scanning Hall probe system was employed to measure the I c distribution of the original sample and the delaminated sample. It was found that approximately 50% of the I c can be preserved after delamination, which was verified by I c measurements using the four-probe method. Dense and crack-free morphologies of the delaminated surfaces were observed by SEM, which accounts for the I c survival of the delaminated YBCO layer. The potential application of the delaminated sample in superconducting joints was discussed based on the oxygen diffusion estimation.

Influence of Mixed Mode I-Mode II Loading on Fatigue Delamination Growth Characteristics of a Graphite Epoxy Tape Laminate

Science.gov (United States)

Ratcliffe, James G.; Johnston, William M., Jr.

2014-01-01

Mixed mode I-mode II interlaminar tests were conducted on IM7/8552 tape laminates using the mixed-mode bending test. Three mixed mode ratios, G(sub II)/G(sub T) = 0.2, 0.5, and 0.8, were considered. Tests were performed at all three mixed-mode ratios under quasi-static and cyclic loading conditions, where the former static tests were used to determine initial loading levels for the latter fatigue tests. Fatigue tests at each mixed-mode ratio were performed at four loading levels, Gmax, equal to 0.5G(sub c), 0.4G(sub c), 0.3G(sub c), and 0.2G(sub c), where G(sub c) is the interlaminar fracture toughness of the corresponding mixed-mode ratio at which a test was performed. All fatigue tests were performed using constant-amplitude load control and delamination growth was automatically documented using compliance solutions obtained from the corresponding quasi-static tests. Static fracture toughness data yielded a mixed-mode delamination criterion that exhibited monotonic increase in Gc with mixed-mode ratio, G(sub II)/G(sub T). Fatigue delamination onset parameters varied monotonically with G(sub II)/G(sub T), which was expected based on the fracture toughness data. Analysis of non-normalized data yielded a monotonic change in Paris law exponent with mode ratio. This was not the case when normalized data were analyzed. Fatigue data normalized by the static R-curve were most affected in specimens tested at G(sub II)/G(sub T)=0.2 (this process has little influence on the other data). In this case, the normalized data yielded a higher delamination growth rate compared to the raw data for a given loading level. Overall, fiber bridging appeared to be the dominant mechanism, affecting delamination growth rates in specimens tested at different load levels and differing mixed-mode ratios.

MR imaging of delamination tears of the rotator cuff tendons

International Nuclear Information System (INIS)

Walz, Daniel M.; Chen, Steven; Miller, Theodore T.; Hofman, Josh

2007-01-01

The objective was to describe the imaging appearances and location of delamination tears of the rotator cuff tendons on non-contrast conventional MR imaging. This study was reviewed and approved by our Institutional Review Board. The reports of 548 consecutive MR examinations of the shoulder were reviewed, looking for mention or description of delamination tears of the rotator cuff. The images of the identified cases were then reviewed by two radiologists to confirm the findings. Correlation with surgical and arthroscopic information was then performed. Delamination tears were defined as horizontal retraction of either the bursal or articular surface of the tendon, manifest as thickening of the torn retracted edge, and/or interstitial splitting of the tendon, manifest as fluid-like high signal intensity on fat-suppressed T2-weighted oblique coronal images. Fourteen cases of delamination tears were identified in 13 patients. Ten of the cases involved the supraspinatus tendon, all with articular surface involvement. Nine of these supraspinatus cases were isolated tears and one occurred as part of a full thickness tear. All 10 of these supraspinatus cases showed medial retraction of the articular surface of the tendon, with thickening of the retracted edge, and 5 of the 10 had a demonstrable horizontal cleft in the interstitium. Four cases involved the subscapularis tendon, with articular surface disruption in three and pure interstitial delamination in one. Medial subluxation of the tendon of the long head of the biceps was present in all four cases. No delamination tears occurred on the bursal surface. Only three of the 14 shoulders underwent surgical repair with one confirmation of supraspinatus delamination, one confirmation of a subscapularis tear that had become a full thickness tear 10 months after initial imaging and another interstitial subscapularis delamination that was not identified arthroscopically. Delamination tears occur most often in the

MR imaging of delamination tears of the rotator cuff tendons

Energy Technology Data Exchange (ETDEWEB)

Walz, Daniel M.; Chen, Steven [North Shore University Hospital, Department of Radiology, Manhasset, NY (United States); Miller, Theodore T. [Hospital for Special Surgery, Department of Radiology and Imaging, New York, NY (United States); Hofman, Josh [Long Island Jewish Medical Center, New Hyde Park, NY (United States)

2007-05-15

The objective was to describe the imaging appearances and location of delamination tears of the rotator cuff tendons on non-contrast conventional MR imaging. This study was reviewed and approved by our Institutional Review Board. The reports of 548 consecutive MR examinations of the shoulder were reviewed, looking for mention or description of delamination tears of the rotator cuff. The images of the identified cases were then reviewed by two radiologists to confirm the findings. Correlation with surgical and arthroscopic information was then performed. Delamination tears were defined as horizontal retraction of either the bursal or articular surface of the tendon, manifest as thickening of the torn retracted edge, and/or interstitial splitting of the tendon, manifest as fluid-like high signal intensity on fat-suppressed T2-weighted oblique coronal images. Fourteen cases of delamination tears were identified in 13 patients. Ten of the cases involved the supraspinatus tendon, all with articular surface involvement. Nine of these supraspinatus cases were isolated tears and one occurred as part of a full thickness tear. All 10 of these supraspinatus cases showed medial retraction of the articular surface of the tendon, with thickening of the retracted edge, and 5 of the 10 had a demonstrable horizontal cleft in the interstitium. Four cases involved the subscapularis tendon, with articular surface disruption in three and pure interstitial delamination in one. Medial subluxation of the tendon of the long head of the biceps was present in all four cases. No delamination tears occurred on the bursal surface. Only three of the 14 shoulders underwent surgical repair with one confirmation of supraspinatus delamination, one confirmation of a subscapularis tear that had become a full thickness tear 10 months after initial imaging and another interstitial subscapularis delamination that was not identified arthroscopically. Delamination tears occur most often in the

The Effect of Substrate Topography on Coating Cathodic Delamination

DEFF Research Database (Denmark)

Erik Weinell, Claus; Sørensen, Per A.; Kiil, Søren

2011-01-01

This article describes the effect of steel substrate topography on coating cathodic delamination. The study showed that the surface preparation can be used to control and minimize the rate of cathodic delamination. The coating should have maximum wetting properties so that substrates with high...

Failure analysis of multiple delaminated composite plates due to ...

Indian Academy of Sciences (India)

Unknown

plates are assumed to contain both single and multiple delaminations. For the case of impact, ... delamination on the first ply failure of the laminate is scarce. ..... 1 in the bottom layer, it was of the opposite sign for the top layer. The plots for ...

Microscopic mechanisms of graphene electrolytic delamination from metal substrates

International Nuclear Information System (INIS)

Fisichella, G.; Di Franco, S.; Roccaforte, F.; Giannazzo, F.; Ravesi, S.

2014-01-01

In this paper, hydrogen bubbling delamination of graphene (Gr) from copper using a strong electrolyte (KOH) water solution was performed, focusing on the effect of the KOH concentration (C KOH ) on the Gr delamination rate. A factor of ∼10 decrease in the time required for the complete Gr delamination from Cu cathodes with the same geometry was found increasing C KOH from ∼0.05 M to ∼0.60 M. After transfer of the separated Gr membranes to SiO 2 substrates by a highly reproducible thermo-compression printing method, an accurate atomic force microscopy investigation of the changes in Gr morphology as a function of C KOH was performed. Supported by these analyses, a microscopic model of the delamination process has been proposed, where a key role is played by graphene wrinkles acting as nucleation sites for H 2 bubbles at the cathode perimeter. With this approach, the H 2 supersaturation generated at the electrode for different electrolyte concentrations was estimated and the inverse dependence of t d on C KOH was quantitatively explained. Although developed in the case of Cu, this analysis is generally valid and can be applied to describe the electrolytic delamination of graphene from several metal substrates.

Characterization of exfoliated/delamination kaolinite

International Nuclear Information System (INIS)

Sun, Dewen; Li, Bin; Li, Yanfeng; Yu, Cui; Zhang, Bo; Fei, Huafeng

2011-01-01

A novel and facile approach for the preparation of exfoliated/delamination kaolinite was reported in this study. Kaolinite was mechanochemically activated by grinding with dimethylsulfoxide in a globe mill for different periods of time, and then the activated samples were treated for several hours at 120 o C to obtain the precursors of kaolinite. The resulting materials were characterized by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. The experimental data indicated that the clay layers were well exfoliated/delamination under mechanochemical effect in a significantly short intercalation time. The expansion of the basal spacing (d 001 ) of raw kaolinite by 0.40 nm pointed out that the hydrogen bonds between adjacent kaolinite layers were partially broken as a result of the intercalation with dimethylsulfoxide.

Delamination detection using methods of computational intelligence

Science.gov (United States)

Ihesiulor, Obinna K.; Shankar, Krishna; Zhang, Zhifang; Ray, Tapabrata

2012-11-01

Abstract Reliable delamination prediction scheme is indispensable in order to prevent potential risks of catastrophic failures in composite structures. The existence of delaminations changes the vibration characteristics of composite laminates and hence such indicators can be used to quantify the health characteristics of laminates. An approach for online health monitoring of in-service composite laminates is presented in this paper that relies on methods based on computational intelligence. Typical changes in the observed vibration characteristics (i.e. change in natural frequencies) are considered as inputs to identify the existence, location and magnitude of delaminations. The performance of the proposed approach is demonstrated using numerical models of composite laminates. Since this identification problem essentially involves the solution of an optimization problem, the use of finite element (FE) methods as the underlying tool for analysis turns out to be computationally expensive. A surrogate assisted optimization approach is hence introduced to contain the computational time within affordable limits. An artificial neural network (ANN) model with Bayesian regularization is used as the underlying approximation scheme while an improved rate of convergence is achieved using a memetic algorithm. However, building of ANN surrogate models usually requires large training datasets. K-means clustering is effectively employed to reduce the size of datasets. ANN is also used via inverse modeling to determine the position, size and location of delaminations using changes in measured natural frequencies. The results clearly highlight the efficiency and the robustness of the approach.

Onset patterns in a simple model of localized parametric forcing.

Science.gov (United States)

Porter, J; Tinao, I; Laverón-Simavilla, A; Rodríguez, J

2013-10-01

We investigate pattern selection at onset in a parametrically and inhomogeneously forced partial differential equation obtained by generalizing Mathieu's equation to include spatial interactions. No separation of scales is assumed. The proposed model is directly relevant to the case of parametrically forced surface waves, such as cross-waves, excited by the horizontal vibration of a fluid, where the forcing is localized to a finite region near the endwall or wavemaker. The availability of analytical solutions in the limit of piecewise constant forcing allows us investigate in detail the dependence of selected eigenfunctions on spatial detuning, forcing width, damping, boundary conditions, and container size. A wide range of onset patterns are located and described, many of which are rotated, modulated, or both, and deviate far from simple crosswise oriented standing waves. The linear selection mechanisms governing this multiplicity of potential onset patterns are discussed.

An in-situ experimental-numerical approach for interface delamination characterization

NARCIS (Netherlands)

Murthy Kolluri, N.V.V.R.

2011-01-01

Interfacial delamination is a key reliability challenge in composites and microelectronic systems due to (high density) integration of dissimilar materials. Delamination occurs due to significant stresses generated at the interfaces, for instance, caused by thermal cycling due to the mismatch in

Delamination behaviour of GdBCO coated conductor tapes under transverse tension

International Nuclear Information System (INIS)

Gorospe, A.; Nisay, A.; Dizon, J.R.; Shin, H.S.

2013-01-01

Highlights: •Installation of a test frame which gives precisely aligned transverse load. •Investigation of I c degradation behaviour depending on the type of sample delamination. •Inhomogeneity of the CC tapes caused large variation on delamination strength. •SEM and EDS analysis of delamination sites under transverse loading. -- Abstract: The electromechanical property behaviour of 2G coated conductor (CC) tapes fabricated by multi-layer deposition process both in the in-plane and transverse direction should be understood. The CC tapes are used in the fabrication of epoxy resin-impregnated coils. In such case, the Lorentz force due to the high magnetic field applied as well as the thermal stress due to the difference in coefficient of thermal expansion (CTE) among constituent layers during cooling to cryogenic temperature will induce transversely applied load to the surface of CC tapes in coils. Hence, the CC tape should have a good mechanical property in the transverse direction in order to maintain its superior performance under magnetic field. In this study, a test frame which gives precisely aligned transverse load was devised. Using the fixture, the delamination behaviours including the delamination strength of the GdBCO CC tapes under transverse tensile loading were investigated. Large variation on the delamination strength of the CC tapes was recorded and might have resulted from the slit edge effect and the inhomogeneity of the CC tapes. The I c degradation behaviour under transverse load was related to the location where delamination occurred in the sample

Influence of substrate topography on cathodic delamination of anticorrosive coatings

DEFF Research Database (Denmark)

Sørensen, Per Aggerholm; Kiil, Søren; Dam-Johansen, Kim

2009-01-01

and thereby the substrate topography, whereas the coating thickness had little influence. The presence of a significant potential gradient between the anode and the cathode and the dependency of the delamination rate on the tortuosity of the steel surface suggests that cathodic delamination is controlled...

Delamination in surface plies of graphite/epoxy caused by the edge trimming process

Science.gov (United States)

Colligan, K.; Ramulu, M.

Delamination in surface plies of graphite/epoxy laminates caused by edge trimming using polycrystalline diamond (PCD) and carbide cutters is investigated. The effect of several machining variables on formation of delaminations in the surface plies of a graphite fiber reinforced composite material is presented. Machining tests were performed to assess the impact of cutter geometry, feedrate, rotation direction, and graphite fiber orientation. Three typical delamination modes were observed and documented. Feedrate was found to have a significant effect on surface ply delamination in graphite/epoxy composite materials.

Hygrothermal influence on delamination behavior of graphite/epoxy laminates

Science.gov (United States)

Garg, A.; Ishai, O.

1985-01-01

The hygrothermal effect on the fracture behavior of graphite-epoxy laminates was investigated to develop a methodology for damage tolerance predictions in advanced composite materials. Several T300/934 laminates were tested using a number of specimen configurations to evaluate the effects of temperature and humidity on delamination fracture toughness under mode 1 and mode 2 loading. It is indicated that moisture has a slightly beneficial influence on fracture toughness or critical strain energy release rate during mode 1 delamination, but has a slightly deleterious effect on mode 2 delamination, and mode 1 transverse cracking. The failed specimens are examined by SEM and topographical differences due to fracture modes are identified. It is concluded that the effect of moisture on fracture topography can not be distinguished.

Delamination behaviour in differently copper laminated REBCO coated conductor tapes under transverse loading

Energy Technology Data Exchange (ETDEWEB)

Gorospe, Alking [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of); Department of Engineering, Aurora State College of Technology, Baler Aurora 3200 (Philippines); Nisay, Arman [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of); Shin, Hyung-Seop, E-mail: hsshin@andong.ac.kr [Department of Mechanical Design Engineering, Andong National University, 1375 Kyungdong-Ro, Andong 760-749 (Korea, Republic of)

2014-09-15

Highlights: • I{sub c} degradation behavior under transverse tension loading in different CC tape structure. • Weibull distribution analysis applied on delamination mechanism of CC tape. • Delamination mechanism on CC tapes depending on copper lamination type. • SEM and WDS mapping analysis of delamination sites under transverse loading. - Abstract: Laminated HTS coated conductor (CC) tapes having a unique multi-layer structure made them vulnerable when exposed to transverse loading. Electromechanical transport properties of these CC tapes can be affected by excessive transverse stresses. Due to the coefficient of thermal expansion (CTE) mismatch and incompatibility among constituent materials used in coil applications, delamination among layers occurs and causes critical current, I{sub c} degradation in the CC tapes. In this study, the delamination behaviors in copper (Cu) solder-laminated CC tapes by soldering and surround Cu-stabilized ones by electroplating under transverse tension loading were investigated. Similarly to the surround Cu-stabilized CC tapes in our previous reports, the Cu solder-laminated CC tapes also showed an abrupt and gradual I{sub c} degradation behavior. However, the Cu solder-laminated CC tapes showed different delamination morphologies as compared to the surround Cu-stabilized CC tapes; the superconducting side and the substrate side of the Cu solder laminated CC tapes were totally separated by delamination. On the other hand, the brass laminate did not show any significant effect on the delamination strength when it is added upon the surround Cu-stabilized CC tapes.

Application of scanning laser Doppler vibrometry for delamination detection in composite structures

Science.gov (United States)

Kudela, Pawel; Wandowski, Tomasz; Malinowski, Pawel; Ostachowicz, Wieslaw

2017-12-01

In this paper application of scanning laser Doppler vibrometry for delamination detection in composite structures was presented. Delamination detection was based on a guided wave propagation method. In this papers results from numerical and experimental research were presented. In the case of numerical research, the Spectral Element Method (SEM) was utilized, in which a mesh was composed of 3D spectral elements. SEM model included also a piezoelectric transducer. In the experimental research guided waves were excited using the piezoelectric transducer whereas the sensing process was conducted using scanning laser Doppler vibrometer (SLDV). Analysis of guided wave propagation and its interaction with delamination was based on a full wavefield approach. Attention was focused on interactions of guided waves with delamination manifested by A0 mode reflection, A0 mode entrapment, and S0/A0 mode conversion. Delamination was simulated by a teflon insert located between plies of composite material. Results of interaction with symmetrically and nonsymmetrical placed delamination (in respect to the composite sample thickness) were presented. Moreover, the authors investigated different size of delaminations. Damage detection was based on a new signal processing algorithm proposed by the authors. In this approach the weighted RMS was utilized selectively. It means that the summation in RMS formula was performed only for a specially selected time instances. Results for simple composite panels, panel with honeycomb core, and real stiffened composite panel from the aircraft were presented.

Optimization of Cutting Parameters on Delamination of Drilling Glass-Polyester Composites

Directory of Open Access Journals (Sweden)

Majid Habeeb Faidh-Allah

2018-02-01

Full Text Available This paper attempted to study the effect of cutting parameters (spindle speed and feed rate on delamination phenomena during the drilling glass-polyester composites. Drilling process was done by CNC machine with 10 mm diameter of high-speed steel (HSS drill bit. Taguchi technique with L16 orthogonal layout was used to analyze the effective parameters on delamination factor. The optimal experiment was no. 13 with spindle speed 1273 rpm and feed 0.05 mm/rev with minimum delamination factor 1.28.

Cartilage Delamination Flap Mimicking a Torn Medial Meniscus

Directory of Open Access Journals (Sweden)

Gan Zhi-Wei Jonathan

2016-01-01

Full Text Available We report a case of a chondral delamination lesion due to medial parapatellar plica friction syndrome involving the medial femoral condyle. This mimicked a torn medial meniscus in clinical and radiological presentation. Arthroscopy revealed a chondral delamination flap, which was debrided. Diagnosis of chondral lesions in the knee can be challenging. Clinical examination and MRI have good accuracy for diagnosis and should be used in tandem. Early diagnosis and treatment of chondral lesions are important to prevent progression to early osteoarthritis.

DELAMINATION PREDICTION IN DRILLING OF CFRP COMPOSITES USING ARTIFICIAL NEURAL NETWORK

Directory of Open Access Journals (Sweden)

K. PALANIKUMAR

2011-04-01

Full Text Available Carbon fibre reinforced plastic (CFRP materials play a major role in the applications of aeronautic, aerospace, sporting and transportation industries. Machining is indispensible and hence drilling of CFRP materials is considered in this present study with respect to spindle speed in rpm, drill size in mm and feed in mm/min. Delamination is one of the major defects to be dealt with. The experiments are carried out using computer numerical control machine and the results are applied to an artificial neural network (ANN for the prediction of delamination factor at the exit plane of the CFRP material. It is found that ANN model predicts the delamination for any given set of machining parameters with a maximum error of 0.81% and a minimum error of 0.03%. Thus an ANN model is highly suitable for the prediction of delamination in CFRP materials.

Delamination evaluation of thermal barrier coating on turbine blade owing to isothermal degradation using ultrasonic C-scan image

International Nuclear Information System (INIS)

Lee, Ho Girl; Kim, Hak Joon; Song, Sung Jin; Seok, Chang Sung

2016-01-01

Thermal barrier coating (TBC) is an essential element consisting of a super-alloy base and ceramic coating designed to achieve long operational time under a high temperature and pressure environment. However, the top coat of TBC can be delaminated at certain temperatures with long operation time. As the delamination of TBC is directly related to the blade damage, the coupling status of the TBC should be assured for reliable operation. Conventional studies of nondestructive evaluation have been made for detecting generation of thermally grown oxide (TGO) or qualitatively evaluating delamination in TBC. In this study, the ultrasonic C-scan method was developed to obtain the damage map inside TBC by estimating the delamination in a quantitative way. All specimens were isothermally degraded at 1,100°C with different time, having different partial delamination area. To detect partial delamination in TBC, the C-scan was performed by a single transducer using pulse-echo method with normal incidence. Partial delamination coefficients of 1 mm to 6 mm were derived by the proportion of the surface reflection signal and flaw signal which were theoretical signals using Rogers-Van Buren and Kim's equations. Using the partial delamination coefficients, the partial delamination maps were obtained. Regardless of the partial delamination coefficient, partial delamination area was increased when degradation time was increased in TBC. In addition, a decrease in partial delamination area in each TBC specimen was observed when the partial delamination coefficient was increased. From the portion of the partial delamination maps, the criterion for delamination was derived

Delamination evaluation of thermal barrier coating on turbine blade owing to isothermal degradation using ultrasonic C-scan image

Energy Technology Data Exchange (ETDEWEB)

Lee, Ho Girl; Kim, Hak Joon; Song, Sung Jin; Seok, Chang Sung [Dept. of Mechanical Engineering, Sungkyunkwan University, Suwon (Korea, Republic of)

2016-10-15

Thermal barrier coating (TBC) is an essential element consisting of a super-alloy base and ceramic coating designed to achieve long operational time under a high temperature and pressure environment. However, the top coat of TBC can be delaminated at certain temperatures with long operation time. As the delamination of TBC is directly related to the blade damage, the coupling status of the TBC should be assured for reliable operation. Conventional studies of nondestructive evaluation have been made for detecting generation of thermally grown oxide (TGO) or qualitatively evaluating delamination in TBC. In this study, the ultrasonic C-scan method was developed to obtain the damage map inside TBC by estimating the delamination in a quantitative way. All specimens were isothermally degraded at 1,100°C with different time, having different partial delamination area. To detect partial delamination in TBC, the C-scan was performed by a single transducer using pulse-echo method with normal incidence. Partial delamination coefficients of 1 mm to 6 mm were derived by the proportion of the surface reflection signal and flaw signal which were theoretical signals using Rogers-Van Buren and Kim's equations. Using the partial delamination coefficients, the partial delamination maps were obtained. Regardless of the partial delamination coefficient, partial delamination area was increased when degradation time was increased in TBC. In addition, a decrease in partial delamination area in each TBC specimen was observed when the partial delamination coefficient was increased. From the portion of the partial delamination maps, the criterion for delamination was derived.

Modeling Quasi-Static and Fatigue-Driven Delamination Migration

Science.gov (United States)

De Carvalho, N. V.; Ratcliffe, J. G.; Chen, B. Y.; Pinho, S. T.; Baiz, P. M.; Tay, T. E.

2014-01-01

An approach was proposed and assessed for the high-fidelity modeling of progressive damage and failure in composite materials. It combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. Delamination, matrix cracking, and migration were captured failure and migration criteria based on fracture mechanics. Quasi-static and fatigue loading were modeled within the same overall framework. The methodology proposed was illustrated by simulating the delamination migration test, showing good agreement with the available experimental data.

Onset of Spinal Cord Astrocyte Precursor Emigration from the Ventricular Zone Involves the Zeb1 Transcription Factor

Directory of Open Access Journals (Sweden)

David Ohayon

2016-11-01

Full Text Available During spinal cord development, astrocyte precursors arise from neuroepithelial progenitors, delaminate from the ventricular zone, and migrate toward their final locations where they differentiate. Although the mechanisms underlying their early specification and late differentiation are being deciphered, less is known about the temporal control of their migration. Here, we show that the epithelial-mesenchymal transition regulator Zeb1 is expressed in glial precursors and report that loss of Zeb1 function specifically delays the onset of astrocyte precursor delamination from the ventricular zone, correlating with transient deregulation of the adhesion protein Cadherin-1. Consequently, astrocyte precursor invasion into the Zeb1−/− mutant white matter is delayed, and induction of their differentiation is postponed. These findings illustrate how fine regulation of adhesive properties influences the onset of neural precursor migration and further support the notion that duration of exposure of migrating astrocyte precursors to environmental cues and/or their correct positioning influence the timing of their differentiation.

Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces

DEFF Research Database (Denmark)

Sørensen, Per Aggerholm; Dam-Johansen, Kim; Erik Weinell, Claus

2010-01-01

So-called cathodic delamination is one of the major modes of failure for organic coatings immersed in electrolyte solutions (e.g. seawater). Cathodic delamination occurs as a result of the electrochemical reactions. which takes place on a corroding steel surface. This means that reactants must co...

Reduction of cathodic delamination rates of anticorrosive coatings using free radical scavengers

DEFF Research Database (Denmark)

Sørensen, Per Aggerholm; Weinell, C. E.; Dam-Johansen, Kim

2010-01-01

Cathodic delamination is one of the major modes of failure for anticorrosive coatings subjected to a physical damage and immersed in seawater. The cause of cathodic delamination has been reported to be the result of a chemical attack at the coating-steel interface by free radicals and peroxides...... formed as intermediates in the cathodic reaction during the corrosion process. In this study, antioxidants (i.e., free radical scavengers and peroxide decomposers) have been incorporated into various generic types of coatings to investigate the effect of antioxidants on the rate of cathodic delamination...... of epoxy coatings on cold rolled steel. The addition of free radical scavengers to epoxy coatings improved the resistance toward cathodic delamination by up to 50% during seawater immersion, while peroxide decomposers had a limited effect. Testing using substrates prepared from stainless steel...

Aerogel to simulate delamination and porosity defects in carbon-fiber reinforced polymer composites

Science.gov (United States)

Juarez, Peter; Leckey, Cara A. C.

2018-04-01

Representative defect standards are essential for the validation and calibration of new and existing inspection techniques. However, commonly used methods of simulating delaminations in carbon-fiber reinforced polymer (CFRP) composites do not accurately represent the behavior of the real-world defects for several widely-used NDE techniques. For instance, it is common practice to create a delamination standard by inserting Polytetrafluoroethylene (PTFE) in between ply layers. However, PTFE can transmit more ultrasonic energy than actual delaminations, leading to an unrealistic representation of the defect inspection. PTFE can also deform/wrinkle during the curing process and has a thermal effusivity two orders of magnitude higher than air (almost equal to that of a CFRP). It is therefore not effective in simulating a delamination for thermography. Currently there is also no standard practice for producing or representing a known porosity in composites. This paper presents a novel method of creating delamination and porosity standards using aerogel. Insertion of thin sheets of solid aerogel between ply layers during layup is shown to produce air-gap-like delaminations creating realistic ultrasonic and thermographic inspection responses. Furthermore, it is shown that depositing controlled amounts of aerogel powder can represent porosity. Micrograph data verifies the structural integrity of the aerogel through the composite curing process. This paper presents data from multiple NDE methods, including X-ray computed tomography, immersion ultrasound, and flash thermography to the effectiveness of aerogel as a delamination and porosity simulant.

Vibration of a Laminated Beam with a Delamination Including Contact Effects

Directory of Open Access Journals (Sweden)

W. Ostachowicz

2004-01-01

Full Text Available Certain results are presented in this paper on damped vibration of a laminated cantilever beam with a single closing delamination. In order to investigate this task the finite element method has been applied in the current study. For modelling the beam higher order shear deformation beam finite elements have been used. The vibration of the beam is investigated in the time domain using a dynamic contact algorithm developed by the authors. The algorithm is based on the Newmark method and also incorporates a Newton-Raphson based procedure for resolving the equation of motion. The time series obtained from solving the equation of motion have been subsequently analysed in the frequency domain by using FFT (Fast Fourier Transform. The vibration responses of the beam due to various harmonic and impulse excitations, at different delamination locations, and for different delamination lengths, as well as changes in the dissipation of damping energy due to the delamination, have all been considered in the paper.

Effects of surface roughness, texture and polymer degradation on cathodic delamination of epoxy coated steel samples

International Nuclear Information System (INIS)

Khun, N.W.; Frankel, G.S.

2013-01-01

Highlights: ► Cathodic delamination of epoxy coated steel samples was studied using SKP. ► Delamination of the coating decreased with increased substrate surface roughness. ► Delamination of the coating was faster on the substrate with parallel surface scratches. ► Delamination of the coating exposed to weathering conditions increased with prolonged exposure. - Abstract: The Scanning Kelvin Probe (SKP) technique was used to investigate the effects of surface roughness, texture and polymer degradation on cathodic delamination of epoxy coated steel. The cathodic delamination rate of the epoxy coatings dramatically decreased with increased surface roughness of the underlying steel substrate. The surface texture of the steel substrates also had a significant effect in that samples with parallel abrasion lines exhibiting faster cathodic delamination in the direction of the lines compared to the direction perpendicular to the lines. The cathodic delamination kinetics of epoxy coatings previously exposed to weathering conditions increased with prolonged exposure due to pronounced polymer degradation. SEM observation confirmed that the cyclic exposure to UV radiation and water condensation caused severe deterioration in the polymer structures with surface cracking and erosion. The SKP results clearly showed that the cathodic delamination of the epoxy coatings was significantly influenced by the surface features of the underlying steel substrates and the degradation of the coatings.

Delamination detection in reinforced concrete using thermal inertia

International Nuclear Information System (INIS)

Del Grande, N K; Durbin, P F.

1998-01-01

We investigated the feasibility of thermal inertia mapping for bridge deck inspections. Using pulsed thermal imaging, we heat-stimulated surrogate delaminations in reinforced concrete and asphalt-concrete slabs. Using a dual-band infrared camera system, we measured thermal inertia responses of Styrofoam implants under 5 cm of asphalt, 5 cm of concrete, and 10 cm of asphalt and concrete. We compared thermal maps from solar-heated concrete and asphalt-concrete slabs with thermal inertia maps from flash-heated concrete and asphalt-concrete slabs. Thermal inertia mapping is a tool for visualizing and quantifying subsurface defects. Physically, thermal inertia is a measure of the resistance of the bridge deck to temperature change. Experimentally, it is determined from the inverse slope of the surface temperature versus the inverse square root of time. Mathematically, thermal inertia is the square root of the product of thermal conductivity, density, and heat capacity. Thermal inertia mapping distinguishes delaminated decks which have below-average thermal inertias from normal or shaded decks. Key Words: Pulsed Thermal Imaging, Thermal Inertia, Detection Of Concrete Bridgedeck Delaminations

Quantitative Evaluation of Delamination in Composites Using Lamb Waves

Science.gov (United States)

Michalcová, L.; Hron, R.

2018-03-01

Ultrasonic guided wave monitoring has become very popular in the area of structural health monitoring (SHM) of aerospace structures. Any possible type of damage must be reliably assessed. The paper deals with delamination length determination in DCB specimens using Lamb waves. An analytical equation based on the velocity dependence on variable thickness is utilized. The group velocity of the fundamental antisymmetric A0 mode rapidly changes in a particular range of the frequency-thickness product. Using the same actuation frequency the propagation velocity is different for delaminated structure. Lamb wave based delamination lengths were compared to the visually determined lengths. The method of the wave velocity determination proved to be essential. More accurate results were achieved by tracking the maximum amplitude of A0 mode than the first signal arrival. These findings are considered as the basis for the damage evaluation of complex structures.

Numerical simulations and experimental measurements of steel and ice impacts on concrete for acoustic interrogation of delaminations in bridge decks

Energy Technology Data Exchange (ETDEWEB)

Mazzeo, Brian A.; Patil, Anjali N.; Klis, Jeffrey M. [Brigham Young University, Department of Electrical and Computer Engineering, Provo, Utah, 84602 (United States); Hurd, Randy C.; Truscott, Tadd T. [Brigham Young University, Department of Mechanical Engineering, Provo, Utah, 84602 (United States); Guthrie, W. Spencer [Brigham Young University, Department of Civil and Environmental Engineering, Provo, Utah, 84602 (United States)

2014-02-18

Delaminations in bridge decks typically result from corrosion of the top mat of reinforcing steel, which leads to a localized separation of the concrete cover from the underlying concrete. Because delaminations cannot be detected using visual inspection, rapid, large-area interrogation methods are desired to characterize bridge decks without disruption to traffic, without the subjectivity inherent in existing methods, and with increased inspector safety. To this end, disposable impactors such as water droplets or ice chips can be dropped using automatic dispensers onto concrete surfaces to excite mechanical vibrations while acoustic responses can be recorded using air-coupled microphones. In this work, numerical simulations are used to characterize the flexural response of a model concrete bridge deck subject to both steel and ice impactors, and the results are compared with similar experiments performed in the laboratory on a partially delaminated concrete bridge deck slab. The simulations offer greater understanding of the kinetics of impacts and the responses of materials.

Piecewise delamination of Moroccan lithosphere from beneath the Atlas Mountains

Science.gov (United States)

Bezada, M. J.; Humphreys, E. D.; Davila, J. M.; Carbonell, R.; Harnafi, M.; Palomeras, I.; Levander, A.

2014-04-01

The elevation of the intracontinental Atlas Mountains of Morocco and surrounding regions requires a mantle component of buoyancy, and there is consensus that this buoyancy results from an abnormally thin lithosphere. Lithospheric delamination under the Atlas Mountains and thermal erosion caused by upwelling mantle have each been suggested as thinning mechanisms. We use seismic tomography to image the upper mantle of Morocco. Our imaging resolves the location and shape of lithospheric cavities and of delaminated lithosphere ˜400 km beneath the Middle Atlas. We propose discontinuous delamination of an intrinsically unstable Atlas lithosphere, enabled by the presence of anomalously hot mantle, as a mechanism for producing the imaged structures. The Atlas lithosphere was made unstable by a combination of tectonic shortening and eclogite loading during Mesozoic rifting and Cenozoic magmatism. The presence of hot mantle sourced from regional upwellings in northern Africa or the Canary Islands enhanced the instability of this lithosphere. Flow around the retreating Alboran slab focused upwelling mantle under the Middle Atlas, which we infer to be the site of the most recent delamination. The Atlas Mountains of Morocco stand as an example of large-scale lithospheric loss in a mildly contractional orogen.

Edge delamination of composite laminates subject to combined tension and torsional loading

Science.gov (United States)

Hooper, Steven J.

1990-01-01

Delamination is a common failure mode of laminated composite materials. Edge delamination is important since it results in reduced stiffness and strength of the laminate. The tension/torsion load condition is of particular significance to the structural integrity of composite helicopter rotor systems. Material coupons can easily be tested under this type of loading in servo-hydraulic tension/torsion test stands using techniques very similar to those used for the Edge Delamination Tensile Test (EDT) delamination specimen. Edge delamination of specimens loaded in tension was successfully analyzed by several investigators using both classical laminate theory and quasi-three dimensional (Q3D) finite element techniques. The former analysis technique can be used to predict the total strain energy release rate, while the latter technique enables the calculation of the mixed-mode strain energy release rates. The Q3D analysis is very efficient since it produces a three-dimensional solution to a two-dimensional domain. A computer program was developed which generates PATRAN commands to generate the finite element model. PATRAN is a pre- and post-processor which is commonly used with a variety of finite element programs such as MCS/NASTRAN. The program creates a sufficiently dense mesh at the delamination crack tips to support a mixed-mode fracture mechanics analysis. The program creates a coarse mesh in those regions where the gradients in the stress field are low (away from the delamination regions). A transition mesh is defined between these regions. This program is capable of generating a mesh for an arbitrarily oriented matrix crack. This program significantly reduces the modeling time required to generate these finite element meshes, thus providing a realistic tool with which to investigate the tension torsion problem.

Free vibration analysis of delaminated composite shells using different shell theories

International Nuclear Information System (INIS)

Nanda, Namita; Sahu, S.K.

2012-01-01

Free vibration response of laminated composite shells with delamination is presented using the finite element method based on first order shear deformation theory. The shell theory used is the extension of dynamic, shear deformable theory according to the Sanders' first approximation for doubly curved shells, which can be reduced to Love's and Donnell's theories by means of tracers. An eight-noded C 0 continuity, isoparametric quadrilateral element with five degrees of freedom per node is used in the formulation. For modeling the delamination, multipoint constraint algorithm is incorporated in the finite element code. The natural frequencies of the delaminated cylindrical (CYL), spherical (SPH) and hyperbolic paraboloid (HYP) shells are determined by using the above mentioned shell theories, namely Sanders', Love's, and Donnell's. The validity of the present approach is established by comparing the authors' results with those available in the literature. Additional studies on free vibration response of CYL, SPH and HYP shells are conducted to assess the effects of delamination size and number of layers considering all three shell theories. It is shown that shell theories according to Sanders and Love always predict practically identical frequencies. Donnell's theory gives reliable results only for shallow shells. Moreover, the natural frequency is found to be very sensitive to delamination size and number of layers in the shell.

The value of magnetoencephalography for seizure-onset zone localization in magnetic resonance imaging-negative partial epilepsy.

Science.gov (United States)

Jung, Julien; Bouet, Romain; Delpuech, Claude; Ryvlin, Philippe; Isnard, Jean; Guenot, Marc; Bertrand, Olivier; Hammers, Alexander; Mauguière, François

2013-10-01

Surgical treatment of epilepsy is a challenge for patients with non-contributive brain magnetic resonance imaging. However, surgery is feasible if the seizure-onset zone is precisely delineated through intracranial electroencephalography recording. We recently described a method, volumetric imaging of epileptic spikes, to delineate the spiking volume of patients with focal epilepsy using magnetoencephalography. We postulated that the extent of the spiking volume delineated with volumetric imaging of epileptic spikes could predict the localizability of the seizure-onset zone by intracranial electroencephalography investigation and outcome of surgical treatment. Twenty-one patients with non-contributive magnetic resonance imaging findings were included. All patients underwent intracerebral electroencephalography investigation through stereotactically implanted depth electrodes (stereo-electroencephalography) and magnetoencephalography with delineation of the spiking volume using volumetric imaging of epileptic spikes. We evaluated the spatial congruence between the spiking volume determined by magnetoencephalography and the localization of the seizure-onset zone determined by stereo-electroencephalography. We also evaluated the outcome of stereo-electroencephalography and surgical treatment according to the extent of the spiking volume (focal, lateralized but non-focal or non-lateralized). For all patients, we found a spatial overlap between the seizure-onset zone and the spiking volume. For patients with a focal spiking volume, the seizure-onset zone defined by stereo-electroencephalography was clearly localized in all cases and most patients (6/7, 86%) had a good surgical outcome. Conversely, stereo-electroencephalography failed to delineate a seizure-onset zone in 57% of patients with a lateralized spiking volume, and in the two patients with bilateral spiking volume. Four of the 12 patients with non-focal spiking volumes were operated upon, none became seizure

Buckling Analysis of Single and Multi Delamination In Composite Beam Using Finite Element Method

Science.gov (United States)

Simanjorang, Hans Charles; Syamsudin, Hendri; Giri Suada, Muhammad

2018-04-01

Delamination is one type of imperfection in structure which found usually in the composite structure. Delamination may exist due to some factors namely in-service condition where the foreign objects hit the composite structure and creates inner defect and poor manufacturing that causes the initial imperfections. Composite structure is susceptible to the compressive loading. Compressive loading leads the instability phenomenon in the composite structure called buckling. The existence of delamination inside of the structure will cause reduction in buckling strength. This paper will explain the effect of delamination location to the buckling strength. The analysis will use the one-dimensional modelling approach using two- dimensional finite element method.

Modeling Fatigue Damage Onset and Progression in Composites Using an Element-Based Virtual Crack Closure Technique Combined With the Floating Node Method

Science.gov (United States)

De Carvalho, Nelson V.; Krueger, Ronald

2016-01-01

A new methodology is proposed to model the onset and propagation of matrix cracks and delaminations in carbon-epoxy composites subject to fatigue loading. An extended interface element, based on the Floating Node Method, is developed to represent delaminations and matrix cracks explicitly in a mesh independent fashion. Crack propagation is determined using an element-based Virtual Crack Closure Technique approach to determine mixed-mode energy release rates, and the Paris-Law relationship to obtain crack growth rate. Crack onset is determined using a stressbased onset criterion coupled with a stress vs. cycle curve and Palmgren-Miner rule to account for fatigue damage accumulation. The approach is implemented in Abaqus/Standard® via the user subroutine functionality. Verification exercises are performed to assess the accuracy and correct implementation of the approach. Finally, it was demonstrated that this approach captured the differences in failure morphology in fatigue for two laminates of identical stiffness, but with layups containing ?deg plies that were either stacked in a single group, or distributed through the laminate thickness.

Cdc42/N-WASP signaling links actin dynamics to pancreatic β cell delamination and differentiation

Science.gov (United States)

Kesavan, Gokul; Lieven, Oliver; Mamidi, Anant; Öhlin, Zarah Löf; Johansson, Jenny Kristina; Li, Wan-Chun; Lommel, Silvia; Greiner, Thomas Uwe; Semb, Henrik

2014-01-01

Delamination plays a pivotal role during normal development and cancer. Previous work has demonstrated that delamination and epithelial cell movement within the plane of an epithelium are associated with a change in cellular phenotype. However, how this positional change is linked to differentiation remains unknown. Using the developing mouse pancreas as a model system, we show that β cell delamination and differentiation are two independent events, which are controlled by Cdc42/N-WASP signaling. Specifically, we show that expression of constitutively active Cdc42 in β cells inhibits β cell delamination and differentiation. These processes are normally associated with junctional actin and cell-cell junction disassembly and the expression of fate-determining transcription factors, such as Isl1 and MafA. Mechanistically, we demonstrate that genetic ablation of N-WASP in β cells expressing constitutively active Cdc42 partially restores both delamination and β cell differentiation. These findings elucidate how junctional actin dynamics via Cdc42/N-WASP signaling cell-autonomously control not only epithelial delamination but also cell differentiation during mammalian organogenesis. PMID:24449844

Delamination Detection in Carbon Fibre Reinforced Composites Using Electrical Resistance Measurement

International Nuclear Information System (INIS)

Kovalovs, A; Rucevskis, S; Kulakov, V; Aniskevich, A

2016-01-01

In the present study 2-D numerical analysis of strip-type laminated composite specimens with and without damage is considered and numerical investigation is carried out by using a finite element method. The surface and oblique resistances are numerically calculated according to the two-probe and four-probe methods. The electrical conductivity of the composite laminate in the longitudinal direction is constant, while the electrical conductivity in the through-thickness direction is used as a variable in the parametric study. The resistance change due to delamination for each case is estimated by comparing the obtained resistance with the corresponding resistance of the specimen without delamination. Applicability and effectiveness of the proposed method are investigated by using various lengths of a delaminated crack in the specimen. (paper)

To improve impact damage response of single and multi-delaminated FRP composites using natural Flax yarn

International Nuclear Information System (INIS)

Ghasemnejad, H.; Soroush, V.R.; Mason, P.J.; Weager, B.

2012-01-01

Highlights: ► To study the impact resistance of delaminated composite structures. ► To improve the impact resistance of delaminated composite structures using natural Flax yarn. ► To investigate the effect of z-pinning on the damage process of composite materials. ► To develop FE techniques to model the impact process of composite structures using LSDYNA. -- Abstract: The ply delamination which is known as a principle mode of failure of layered composites due to separation along the interfaces of the layers is one of the main concerns in designing of composite material structures. In this regard, the effect of hybrid laminate lay-up in multi-delaminated composite beam was investigated. The Charpy impact test was chosen to study the energy absorbing capability of delaminated composite beam. Hybrid composite beams were fabricated from combination of glass/epoxy and carbon/epoxy composites. To improve the impact behaviour of multi-delaminated composite beams the laminated hybrid composite beams were pinned using Flax yarns before curing process. It was shown that the multi-delaminated composite beams which are pinned in z-direction are able to arrest the crack propagation and consequently absorb more energy in comparison with simple ones in hybrid composite beams. The Charpy impact test of delaminated composite beams was also simulated by finite element software LS-DYNA and the results were verified with the relevant experimental results.

The coupled effects of thickness and delamination on cracking resistance of X70 pipeline steel

International Nuclear Information System (INIS)

Guo, W.; Dong, H.; Lu, M.; Zhao, X.

2002-01-01

The effects of thickness and delamination on the fracture toughness and stable crack growth behaviour of high-toughness pipeline steels were investigated experimentally by use of compact tension specimens with thicknesses of 3-15 mm cut from a 17 mm-thick wall pipe. Material resistance curves were generated based on the stress intensity factor (SIF) K and the J-integral. The critical SIF K c and the J-resistance curves are found to be independent of thickness as the delaminations near the crack tip within the material reduce the out-of-plane constraint in thicker specimens. Both fracture mechanism and mechanics analyses shown that the fracture behaviour of the steel is controlled by the strong-coupled effects of thickness and delaminations. With increasing thickness, the out-of-plane stress constraint increases and causes the inclusion separation, growth and coalescence to form delaminations of different sizes before the main crack initiates. The delaminations in turn, reduce the out-of-plane constraint and thus, the thickness effect upon fracture. The advantages and disadvantages of delaminations in a safety assessment of pipelines are also discussed based on three-dimensional fracture theory

Understanding mixed-mode cyclic fatigue delamination growth in unidirectional composites : An experimental approach

NARCIS (Netherlands)

Amaral, L.; Alderliesten, R.C.; Benedictus, R.

2017-01-01

Due to the lack of fundamental knowledge of the physics behind delamination growth, certification authorities currently require that composite structures in aircraft are designed such that any delamination will not grow. This usually leads to an overdesign of the structure, hampering weight

Delamination R-curve as a material property of unidirectional glass/epoxy composites

International Nuclear Information System (INIS)

Shokrieh, M.M.; Heidari-Rarani, M.; Ayatollahi, M.R.

2012-01-01

Highlights: → The R-curve behavior of a unidirectional laminate as a material property is investigated. → Effect of initial crack length and thickness on R-curve is experimentally shown. → A mathematical relation is proposed to model the R-curve behavior of any unidirectional laminated composite. -- Abstract: It is still questionable to think of delamination resistance of a double cantilever beam (DCB) as a material property independent of the specimen size and geometry. In this research, the effects of initial crack length and DCB specimen thickness on the mode I delamination resistance curve (R-curve) behavior of different unidirectional glass/epoxy DCB specimens are experimentally investigated. It is observed that the magnitudes of initiation and propagation delamination toughness (G Ic-init and G Ic-prop ) as well as the fiber bridging length are constant in a specific range of the initial crack length to the DCB specimen thickness ratios of 8.5 0 /h < 19. Finally, a mathematical relationship is proposed for prediction of mode I delamination behavior (from the initiation to propagation) of E-glass/epoxy DCB specimens.

Delamination-Debond Behaviour of Composite T- Joints in Wind Turbine Blades

International Nuclear Information System (INIS)

Gulasik, H; Coker, D

2014-01-01

Wind turbine industry utilizes composite materials in turbine blade structural designs because of their high strength/stiffness to weight ratio. T-joint is one of the design configurations of composite wind turbine blades. T-joints consist of a skin panel and a stiffener co-bonded or co-cured together with a filler material between them. T-joints are prone to delaminations between skin/stiffener plies and debonds between skin-stiffener-filler interfaces. In this study, delamination/debond behavior of a co-bonded composite T-joint is investigated under 0° pull load condition by 2D finite element method. Using Abaqus® commercial FE software, zero-thickness cohesive elements are used to simulate delamination/debond in ply interfaces and bonding lines. Pulling load at 0° is applied and load-displacement behavior and failure scenario are observed. The failure sequence consists of debonding of filler/stringer interface during one load drop followed by a second drop in which the 2nd filler/stringer debonds, filler/skin debonding and skin delamination leading to total loss of load carrying capacity. This type of failure initiation has been observed widely in the literature. When the debond strength is increased 30%, failure pattern is found to change in addition to increasing the load capacity by 200% before total loss of loading carrying capacity occurs. Failure initiation and propagation behavior, initial and max failure loads and stress fields are affected by the property change. In all cases mixed-mode crack tip loading is observed in the failure initiation and propagation stages. In this paper, the detailed delamination/debonding history in T-joints is predicted with cohesive elements for the first time

Hierarchical system for autonomous sensing-healing of delamination in large-scale composite structures

International Nuclear Information System (INIS)

Minakuchi, Shu; Sun, Denghao; Takeda, Nobuo

2014-01-01

This study combines our hierarchical fiber-optic-based delamination detection system with a microvascular self-healing material to develop the first autonomous sensing-healing system applicable to large-scale composite structures. In this combined system, embedded vascular modules are connected through check valves to a surface-mounted supply tube of a pressurized healing agent while fiber-optic-based sensors monitor the internal pressure of these vascular modules. When delamination occurs, the healing agent flows into the vascular modules breached by the delamination and infiltrates the damage for healing. At the same time, the pressure sensors identify the damaged modules by detecting internal pressure changes. This paper begins by describing the basic concept of the combined system and by discussing the advantages that arise from its hierarchical nature. The feasibility of the system is then confirmed through delamination infiltration tests. Finally, the hierarchical system is validated in a plate specimen by focusing on the detection and infiltration of the damage. Its self-diagnostic function is also demonstrated. (paper)

Cathodic delamination: Quantification of ionic transport rates along coating-steel interfaces

DEFF Research Database (Denmark)

Sørensen, P.A.; Dam-Johansen, Kim; Weinell, C.E.

2010-01-01

So-called cathodic delamination is one of the major modes of failure for organic coatings immersed in electrolyte solutions (e.g. seawater). Cathodic delamination occurs as a result of the electrochemical reactions, which takes place on a corroding steel surface. This means that reactants must...... continuously be transported from the bulk solution to the cathodic areas. The transport of sodium ions from a defect in the coating to the cathodic areas is generally considered the rate-determining step for cathodic delamination because the transport of oxygen and water through the coating is sufficient...... for the corrosion processes. In this work, a novel practical method, which allows direct estimation of the apparent diffusion coefficient of sodium ions in the ultrathin aqueous layer at the coating-steel interface, is described. The apparent diffusion coefficients estimated are of similar magnitude as previously...

Fiber Optic Thermal Detection of Composite Delaminations

Science.gov (United States)

Wu, Meng-Chou; Winfree, William P.

2011-01-01

A recently developed technique is presented for thermographic detection of delaminations in composites by performing temperature measurements with fiber optic Bragg gratings. A single optical fiber with multiple Bragg gratings employed as surface temperature sensors was bonded to the surface of a composite with subsurface defects. The investigated structure was a 10-ply composite specimen with prefabricated delaminations of various sizes and depths. Both during and following the application of a thermal heat flux to the surface, the individual Bragg grating sensors measured the temporal and spatial temperature variations. The data obtained from grating sensors were analyzed with thermal modeling techniques of conventional thermography to reveal particular characteristics of the interested areas. Results were compared and found to be consistent with the calculations using numerical simulation techniques. Also discussed are methods including various heating sources and patterns, and their limitations for performing in-situ structural health monitoring.

Energy based study of quasi-static delamination as a low cycle fatigue process

NARCIS (Netherlands)

Amaral, L.; Yao, L.; Alderliesten, R.C.; Benedictus, R.

2015-01-01

This work proposes to treat quasi-static mode I delamination growth of CFRP as a low-cycle fatigue process. To this end, mode I quasi-static and fatigue delamination tests were performed. An average physical Strain Energy Release Rate (SERR), derived from an energy balance, is used to characterize

Impulse response measurements as dependent on crack depth. Delamination

International Nuclear Information System (INIS)

Ulriksen, Peter

2011-02-01

The purpose of the project is to investigate the impulse-response method's ability to detect delamination at different depths. This method is of particular interest, since some of it's realizations strongly resembles established methods like 'bomknackning' . Since the personnel that will be responsible for future measurements with new technology, should feel confidence in new methods, it is an advantage if the new methods connect to older, accepted methods. The project consists of three parts and a fourth is planned. The first part of the investigation is made with a vibrator connected to an impedance head which in turn is connected to the surface of the concrete test specimen with internal delaminations at different depths. The vibrator is controlled by a dynamic signal analyze, which also measures the force- and acceleration signals from the impedance head and convert them to impedance. Since the impedance head must be glued to the surface of the concrete this method is only of laboratory interest. This method gives a complete description of the behavior of the concrete for the frequencies investigated. Thus in following investigations the frequencies of interest are known. From the experiment it follows that delamination down to a depth of 80-100 mm can be detected through a clear and solitary resonance peak. This resonance frequency is a function of concrete slab thickness and extension, so if the extension can be measured it may be possible to calculate depth. The second part of the investigation is about using an instrumented hammer to hit the different delamination specimens. The hammer is equipped with a force transducer giving an opportunity to measure the force exerted by the strike against the concrete surface. When a hammer is struck against a concrete surface a spectrum of vibrations is created, dependent on the weight of the hammer and the elasticity of the concrete. A light hammer generates higher frequencies than a heavy one. Three different hammer

Calibration of a finite element composite delamination model by experiments

DEFF Research Database (Denmark)

Gaiotti, M.; Rizzo, C.M.; Branner, Kim

2013-01-01

This paper deals with the mechanical behavior under in plane compressive loading of thick and mostly unidirectional glass fiber composite plates made with an initial embedded delamination. The delamination is rectangular in shape, causing the separation of the central part of the plate into two...... distinct sub-laminates. The work focuses on experimental validation of a finite element model built using the 9-noded MITC9 shell elements, which prevent locking effects and aiming to capture the highly non linear buckling features involved in the problem. The geometry has been numerically defined...

Delamination propensity of pharmaceutical glass containers by accelerated testing with different extraction media.

Science.gov (United States)

Guadagnino, Emanuel; Zuccato, Daniele

2012-01-01

The delamination of pharmaceutical glass is a serious issue, as it can cause glass particles to appear in vials, a problem that has forced a number of drug product recalls in recent years. In Type I pharmaceutical glass vials, delamination occurs generally at the bottom and shoulder, where extensive flaming during the conversion process can favor a strong evaporation of alkali and borate species and the formation of heavily enriched silica layers. The contact with parenteral preparations dissolved in an alkaline medium increases the rate of glass corrosion, while the differential hydration of these layers can cause the detachment of flakes. The purpose of this study was to investigate the effect of the pH and the composition of the extraction solutions on the propensity of different glass types to delaminate. Repeated autoclave extractions at 121 °C were carried out on different glass types with different extraction media, including organic extractants like citric and glutaric acid. When vials were in contact with alkaline solutions and similarly aggressive media, an increase in silica extraction values indicated glass corrosion and an increasing risk for further delamination. Under such conditions expansion 33 glass is extensively corroded, showing high silica concentration and heavy flaking as compared to other glass types. Sulfur-treated glass also showed early flaking, even if SiO(2) concentration was very low. A similar ranking was observed with extractions carried out with glutaric and citric acids, but at far much higher SiO(2) concentration levels. Extractions with 0.9% KCl solution can be used as an accelerated test to highlight the propensity of a glass to delaminate, but in no case it can be taken as a guarantee that the glass will not delaminate when exposed to the pharmaceutical drug, whose extraction ability requires case-by-case study. How can injectable drug manufacturers prevent glass delamination? The issue of delamination is a serious one, as it

Acoustic Emission based on sentry function to monitor the initiation of delamination in composite materials

International Nuclear Information System (INIS)

Bakhtiary Davijani, A.A.; Hajikhani, M.; Ahmadi, M.

2011-01-01

Research highlights: → Constant load does not confirm constant damage in composite materials. → Different damages have different AE events. → Sentry function is a useful tool to monitor the initiation of damage in delamination. → The less sentry function number is the more damage the material has endured. -- Abstract: Delamination is the most common failure mode in composite materials, since it will result in the reduction of stiffness and can grow throughout other layers. Delamination is consisted of two main stages including initiation and propagation. Understanding the behavior of the material in these zones is very important, hence it has been thoroughly studied by different methods such as numerical methods, Acoustic Emission (AE), and modeling. Between these two regions initiation is a more vital stage in the delamination of the material. Once initiation occurs, which normally requires greater amount of force, cracks can easily propagate through the structure with little force and cause the failure of the structure. A better knowledge of initiation can lead to better design and production of stronger materials. Additionally, more knowledge about crack initiation and its internal microevents would help improve other parameters and result in higher strength against crack initiation. AE is a suitable method for in situ monitoring of damage in composite materials. In this study, AE was applied to test different glass/epoxy specimens which were loaded under mode I delamination. A function that combines AE and mechanical information is employed to investigate the initiation of delamination. Scanning electron microscope (SEM) was used to verify the results of this function. It is shown that this method is an appropriate technique to monitor the behavior of the initiation of delamination.

Delamination of hexagonal boron nitride in a stirred media mill

International Nuclear Information System (INIS)

Damm, C.; Körner, J.; Peukert, W.

2013-01-01

A scalable process for delamination of hexagonal boron nitride in an aqueous solution of the non-ionic surfactant TWEEN85 using a stirred media mill is presented. The size of the ZrO 2 beads used as grinding media governs the dimensions of the ground boron nitride particles as atomic force microscopic investigations (AFM) reveal: the mean flakes thickness decreases from 3.5 to 1.5 nm and the ratio between mean flake area and mean flake thickness increases from 2,200 to 5,800 nm if the grinding media size is reduced from 0.8 to 0.1 mm. This result shows that a high number of stress events in combination with low stress energy (small grinding media) facilitate delamination of the layered material whereas at high stress energies in combination with a low number of stress events (large grinding media) breakage of the layers dominates over delamination. The results of particle height analyses by AFM show that few-layer structures have been formed by stirred media milling. This result is in agreement with the layer thickness dependence of the delamination energy for hexagonal boron nitride. The concentration of nanoparticles remaining dispersed after centrifugation of the ground suspension increases with grinding time and with decreasing grinding media size. After 5 h of grinding using 0.1 mm ZrO 2 grinding media the yield of nanoparticle formation is about 5 wt%. The nanoparticles exhibit the typical Raman peak for hexagonal boron nitride at 1,366 cm −1 showing that the in-plane order in the milled platelets is remained.

Mechanism of Electrochemical Delamination of Two-Dimensional Materials from Their Native Substrates by Bubbling.

Science.gov (United States)

Sun, Jie; Fan, Xing; Guo, Weiling; Liu, Lihui; Liu, Xin; Deng, Jun; Xu, Chen

2015-12-16

A capacitor-based circuit model is proposed to explain the electrochemical delamination of two-dimensional materials from their native substrates where produced gas bubbles squeeze into the interface. The delamination is actually the electric breakdown of the capacitor formed between the solution and substrate. To facilitate the procedure, the backside of the ubstrate has to be shielded so that the capacitor breakdown voltage can be reached. The screening effect can be induced either by nonreactive ions around the electrode or, more effectively, by an undetachable insulator. This mechanism serves as a guideline for the surface science and applications involving the bubbling delamination.

Quantitative Evaluation of Delamination Inside of Composite Materials by ESPI

International Nuclear Information System (INIS)

Kim, Koung Suk; Yang, Kwang Young; Kang, Ki Soo; Ji, Chang June

2004-01-01

Electronic speckle pattern interferometry (ESPI) for quantitative evaluation of delaminations inside of a composite material plate is described. Delaminations caused by the impact on composite materials are difficult to detect visual inspection and ultrasonic testing due to non-homeogenous structure. This paper proposes the quantitative evaluation technique of the defects made in the composite plates by impact load. Artificial defects are introduced inside of the composite plate for the development of a reliable ESPI inspection technique. Real defects produced by impact tester are inspected and compared with the results of visual inspection which shows a good agreement within 5% error

Cyclic delamination behavior of plasma-sprayed hydroxyapatite coating on Ti-6Al-4V substrates in simulated body fluid.

Science.gov (United States)

Otsuka, Yuichi; Kawaguchi, Hayato; Mutoh, Yoshiharu

2016-10-01

This study aimed to clarify the effect of a simulated body fluid (SBF) on the cyclic delamination behavior of a plasma-sprayed hydroxapatite (HAp) coating. A HAp coating is deposited on the surfaces of surgical metallic materials in order to enhance the bond between human bone and such surfaces. However, the HAp coating is susceptible to delamination by cyclic loading from the patient's gait. Although hip joints are subjected to both positive and negative moments, only the effects of tensile bending stresses on vertical crack propagation behavior have been investigated. Thus, the cyclic delamination behavior of a HAp coating was observed at the stress ratio R=-1 in order to determine the effects of tensile/compressive loading on the delamination behavior. The delamination growth rate increased with SBF immersion, which decreased the delamination life. Raman spectroscopy analysis revealed that the selective phase dissolution in the HAp coating was promoted at interfaces. Finite element analysis revealed that the energy release rate Gmax showed a positive value even in cases with compressive loading, which is a driving force for the delamination of a HAp coating. A prediction model for the delamination growth life was developed that combines a fracture mechanics parameter with the assumed stress-dependent dissolution rate. The predicted delamination life matched the experimental data well in cases of lower stress amplitudes with SBF. Copyright © 2016 Elsevier B.V. All rights reserved.

Synthesis of mullite nanometers microwave from bentonite delaminated

International Nuclear Information System (INIS)

Gomes, J.; Azevedo, N.A.; Vieira, D.A.; Neves, G.A.; Santana, L.N.L.; Menezes, R.R.

2011-01-01

The smectite clays present as lamellar structure is formed by two layers of silica tetrahedrons and one layer of aluminum octahedra, which can be individually delaminated, reaching a thickness of about 1mm. Mullite is the only thermodynamically stable crystalline phase of SiO 2 and Al2O 3 system and can be synthesized from minerals that exhibit these oxides in its composition. The microwave synthesis offers advantages over conventional methods, the heating is rapid and uniform, avoiding an undesirable grain growth. This study aims to obtain nanometric mullite from bentonites delamined subjected to microwave heating. The samples were initially treated, then rehydrated, frozen and deagglomeration in a ball mill for 4 and 8 hours. Subsequently subjected to centrifugation, drying and microwave heating. The results showed that nano-mullite was obtained for samples subjected to longer heating and dispersions. (author)

Peeling back the lithosphere: Controlling parameters, surface expressions and the future directions in delamination modeling

Science.gov (United States)

Göğüş, Oğuz H.; Ueda, Kosuke

2018-06-01

Geodynamical models investigate the rheological and physical properties of the lithosphere that peels back (delaminates) from the upper-middle crust. Meanwhile, model predictions are used to relate to a set of observations in the geological context to the test the validity of delamination. Here, we review numerical and analogue models of delamination from these perspectives and provide a number of first-order topics which future modeling studies may address. Models suggest that the presence of the weak lower crust that resides between the strong mantle lithosphere (at least 100 times more viscous/stronger) and the strong upper crust is necessary to develop delamination. Lower crustal weakening may be induced by melt infiltration, shear heating or it naturally occurs through the jelly sandwich type strength profile of the continental lithosphere. The negative buoyancy of the lithosphere required to facilitate the delamination is induced by the pre-existing ocean subduction and/or the lower crustal eclogitization. Surface expression of the peeling back lithosphere has a distinct transient and migratory imprint on the crust, resulting in rapid surface uplift/subsidence, magmatism, heating and shortening/extension. New generation of geodynamical experiments can explain how different types of melting (e.g hydrated, dry melting) occurs with delamination. Reformation of the lithosphere after removal, three dimensional aspects, and the termination of the process are key investigation areas for future research. The robust model predictions, as with other geodynamic modeling studies should be reconciled with observations.

Numerical models of delamination behavior in 2G HTS tapes under transverse tension and peel

Science.gov (United States)

Duan, Yujie; Ta, Wurui; Gao, Yuanwen

2018-02-01

In extreme operating environments, delamination in 2G HTS tapes occurs within and/or near the superconductor layer from high transverse tensile stresses caused by fabrication, Lorentz forces and thermal mismatch, etc. Generally, transverse opening and peeling off are the main delamination modes, and are always studied in anvil and peel tests, respectively. Numerical models of these modes for 2G HTS tape are presented wherein the mixed-mode traction-separation law at the interface of the silver and superconductor layers is considered. Plastic deformations of copper, silver, and Hastelloy® in the HTS tape are taken into account. The results obtained from the transverse opening model show that the maximum average tensile stress is smaller than the delamination tensile strength because delamination is asynchronous in the tape. When a crack appears in the tape, only a small stress ( ≤ 1 MPa) is required to expand the crack to other stress free areas through peeling. Using the peeling model, the dependency of the peel strength on peeling angle is investigated under constant fracture toughness. Peel strength decreases with the peeling angle until the minimum value is reached at 150°, and thereafter increases slightly. Other results indicate that peel strength depends strongly on delamination strength, fracture toughness, and thickness of copper layer. The fracture toughness of the delamination interface, which is difficult to obtain by experiment, can be extracted using the present model.

Numerical evaluation of delamination in CFRP laminates by stereo X-ray pictures

International Nuclear Information System (INIS)

Kunoo, Kazuo; Uda, Nobuhide; Ono, Kousei; Onohara, Kaoru; Takahashi, Toshiaki; Tanaka, Hisahiro.

1989-01-01

This paper presents a method for quantifying damage in composite laminates by stereo X-ray pictures. A three dimensional image of delamination, which is one of the characteristic types of damage in composite laminates can be reconstructed with this method. A digital image processing technique is used to analyze X-ray pictures. Experimental results of reconstructing delaminations in carbon/epoxy cross-ply laminates show that this method is accurate enough for practical usage. (author)

Mechanism of Electrochemical Delamination of Two-Dimensional Materials from Their Native Substrates by Bubbling

Directory of Open Access Journals (Sweden)

Jie Sun

2015-12-01

Full Text Available A capacitor-based circuit model is proposed to explain the electrochemical delamination of two-dimensional materials from their native substrates where produced gas bubbles squeeze into the interface. The delamination is actually the electric breakdown of the capacitor formed between the solution and substrate. To facilitate the procedure, the backside of the ubstrate has to be shielded so that the capacitor breakdown voltage can be reached. The screening effect can be induced either by nonreactive ions around the electrode or, more effectively, by an undetachable insulator. This mechanism serves as a guideline for the surface science and applications involving the bubbling delamination.

Progressive delamination in polymer matrix composite laminates: A new approach

Science.gov (United States)

Chamis, C. C.; Murthy, P. L. N.; Minnetyan, L.

1992-01-01

A new approach independent of stress intensity factors and fracture toughness parameters has been developed and is described for the computational simulation of progressive delamination in polymer matrix composite laminates. The damage stages are quantified based on physics via composite mechanics while the degradation of the laminate behavior is quantified via the finite element method. The approach accounts for all types of composite behavior, laminate configuration, load conditions, and delamination processes starting from damage initiation, to unstable propagation, and to laminate fracture. Results of laminate fracture in composite beams, panels, plates, and shells are presented to demonstrate the effectiveness and versatility of this new approach.

Effect of Location of Delamination on Free Vibration of Cross-Ply Conical Shells

Directory of Open Access Journals (Sweden)

Sudip Dey

2012-01-01

Full Text Available Location of delamination is a triggering parameter for structural instability of laminated composites. In this paper, a finite element method is employed to determine the effects of location of delamination on free vibration characteristics of graphite-epoxy cross-ply composite pre-twisted shallow conical shells. The generalized dynamic equilibrium equation is derived from Lagrange's equation of motion neglecting Coriolis effect for moderate rotational speeds. The formulation is exercised by using an eight noded isoparametric plate bending element based on Mindlin's theory. Multi-point constraint algorithm is utilized to ensure the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front. The standard eigen value problem is solved by applying the QR iteration algorithm. Finite element codes are developed to obtain the numerical results concerning the effects of location of delamination, twist angle and rotational speed on the natural frequencies of cross-ply composite shallow conical shells. The mode shapes are also depicted for a typical laminate configuration. Numerical results obtained from parametric studies of both symmetric and anti-symmetric cross-ply laminates are the first known non-dimensional natural frequencies for the type of analyses carried out here.

Nondestructive testing of delaminated interfaces between two materials using electromagnetic interrogation

Science.gov (United States)

Cakoni, Fioralba; de Teresa, Irene; Monk, Peter

2018-06-01

We consider the problem of detecting whether two materials that should be in contact have separated or delaminated using electromagnetic radiation. The interface damage is modeled as a thin opening between two materials of different electromagnetic properties. To derive a reconstruction algorithm that focuses on testing for the delamination at the interface between the two materials, we use the approximate asymptotic model for the forward problem derived in de Teresa (2017 PhD Thesis University of Delaware). In this model, the differential equations in the small opening are replaced by approximate transmission conditions for the electromagnetic fields across the interface. We also assume that the undamaged or background state is known and it is desired to find where the delamination has opened. We adapt the linear sampling method to this configuration in order to locate the damaged part of the interface from a knowledge of the scattered field and the undamaged configuration, but without needing to know the electromagnetic properties of the opening. Numerical examples are presented to validate our algorithm.

Transient Dynamic Response of Delaminated Composite Rotating Shallow Shells Subjected to Impact

Directory of Open Access Journals (Sweden)

Amit Karmakar

2006-01-01

Full Text Available In this paper a transient dynamic finite element analysis is presented to study the response of delaminated composite pretwisted rotating shallow shells subjected to low velocity normal impact. Lagrange's equation of motion is used to derive the dynamic equilibrium equation and moderate rotational speeds are considered wherein the Coriolis effect is negligible. An eight noded isoparametric plate bending element is employed in the finite element formulation incorporating rotary inertia and effects of transverse shear deformation based on Mindlin's theory. To satisfy the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front a multipoint constraint algorithm is incorporated which leads to unsymmetric stiffness matrices. The modified Hertzian contact law which accounts for permanent indentation is utilized to compute the contact force, and the time dependent equations are solved by Newmark's time integration algorithm. Parametric studies are performed in respect of location of delamination, angle of twist and rotational speed for centrally impacted graphite-epoxy composite cylindrical shells.

Quasistatic Delamination of Sandwich-Like Kirchhoff-Love Plates

Czech Academy of Sciences Publication Activity Database

Freddi, L.; Roubíček, Tomáš; Zanini, Ch.

2013-01-01

Roč. 113, č. 2 (2013), s. 219-250 ISSN 0374-3535 R&D Projects: GA ČR GAP201/10/0357 Institutional research plan: CEZ:AV0Z20760514 Keywords : adhesive contact * delamination * mixed modes Subject RIV: BA - General Mathematics Impact factor: 1.043, year: 2013

Utilization of Large Cohesive Interface Elements for Delamination Simulation

DEFF Research Database (Denmark)

Bak, Brian Lau Verndal; Lund, Erik

2012-01-01

This paper describes the difficulties of utilizing large interface elements in delamination simulation. Solutions to increase the size of applicable interface elements are described and cover numerical integration of the element and modifications of the cohesive law....

Modeling Delamination of Interfacial Corner Cracks in Multilayered Structures

DEFF Research Database (Denmark)

Veluri, Badrinath (Badri); Jensen, Henrik Myhre

2013-01-01

Multilayered electronic components, typically of heterogeneous materials, delaminate under thermal and mechanical loading. A phenomenological model focused on modeling the shape of such interface cracks close to corners in layered interconnect structures for calculating the critical stress...

Quasistatic delamination models for Kirchhoff-Love plates

Czech Academy of Sciences Publication Activity Database

Freddi, L.; Paroni, R.; Roubíček, Tomáš; Zanini, Ch.

2011-01-01

Roč. 91, č. 11 (2011), s. 845-865 ISSN 0044-2267 R&D Projects: GA ČR(CZ) GAP201/10/0357 Institutional research plan: CEZ:AV0Z20760514 Keywords : brittle delamination * adhesive contact * rate-independent processes Subject RIV: BA - General Mathematics Impact factor: 0.863, year: 2011 http://onlinelibrary.wiley.com/doi/10.1002/zamm.201000171/abstract

Distributed fiber optic sensor-enhanced detection and prediction of shrinkage-induced delamination of ultra-high-performance concrete overlay

Science.gov (United States)

Bao, Yi; Valipour, Mahdi; Meng, Weina; Khayat, Kamal H.; Chen, Genda

2017-08-01

This study develops a delamination detection system for smart ultra-high-performance concrete (UHPC) overlays using a fully distributed fiber optic sensor. Three 450 mm (length) × 200 mm (width) × 25 mm (thickness) UHPC overlays were cast over an existing 200 mm thick concrete substrate. The initiation and propagation of delamination due to early-age shrinkage of the UHPC overlay were detected as sudden increases and their extension in spatial distribution of shrinkage-induced strains measured from the sensor based on pulse pre-pump Brillouin optical time domain analysis. The distributed sensor is demonstrated effective in detecting delamination openings from microns to hundreds of microns. A three-dimensional finite element model with experimental material properties is proposed to understand the complete delamination process measured from the distributed sensor. The model is validated using the distributed sensor data. The finite element model with cohesive elements for the overlay-substrate interface can predict the complete delamination process.

Automatic delamination defect detection in radiographic sequence of rocket boosters

International Nuclear Information System (INIS)

Rebuffel, V.; Pires, S.; Caplier, A.; Lamarque, P.

2003-01-01

Solid rocket motors are routinely examined in real-time X-ray radioscopic mode. The large and cylindrical boosters are rotating between a high energy source and a two dimensional detector. The purpose of this control is to detect possible defects all through the sample. In the tangential configuration, the part of the object that intersects the X-rays beam is the peripheral one, allowing to detect the delamination defect between the propellant and the external metal envelope. But the defect detectability is very poor due to the strong attenuation of the X-rays through the motors. During the rotation of the booster, the system acquires a sequence of radiographs where the defects are visible over several successive instants. We have previously developed a real-time tomo-synthesis system, processing the radiographs on line, and based on a tomo-synthesis reconstruction algorithm in order to improve the signal-to-noise ratio. This system is installed at the industrial site of Kourou, and is currently used by the operators in charge of the visual inspection of the boosters. In this paper, we present a method that processes the digital images obtained by the system in the purpose of automatically extracting the delamination defects. Due to the size and the poor contrast of the defects, a single image is not sufficient to perform this detection. A spatio-temporal aspect is required for the algorithm to be robust and efficient. In a first step, the proposed method computes the apparent local displacement between the current radiograph and a reference one. This reference image is acquired at the beginning of the rotation, with few noise, and is supposed to be defect free. The apparent displacement is due to the non-perfect rotation positioning. It may be uniform or not, depending on the deformation of the insulation liner of the metallic wall. The images are then registered and compared. On the resulting difference image we apply a smoothed threshold to obtain an

Factors predictive of the onset and duration of action of local anesthesia in mandibular third-molar surgery: a prospective study.

Science.gov (United States)

Al-Shayyab, Mohammad H; Baqain, Zaid H

2018-04-01

The aim of this study was to assess the influence of patients' and surgical variables on the onset and duration of action of local anesthesia (LA) in mandibular third-molar (M3) surgery. Patients scheduled for mandibular M3 surgery were considered for inclusion in this prospective cohort study. Patients' and surgical variables were recorded. Two per cent (2%) lidocaine with 1:100,000 epinephrine was used to block the nerves for extraction of mandibular M3. Then, the onset of action and duration of LA were monitored. Univariate analysis and multivariate regression analysis were used to analyze the data. The final cohort included 88 subjects (32 men and 56 women; mean age ± SD = 29.3 ± 12.3 yr). With univariate analysis, age, gender, body mass index (BMI), smoking quantity and duration, operation time, and 'volume of local anesthetic needed' significantly influenced the onset of action and duration of LA. Multivariate regression revealed that age and smoking quantity were the only statistically significant predictors of the onset of action of LA, whereas age, smoking quantity, and 'volume of local anesthetic needed' were the only statistically significant predictors of duration of LA. Further studies are recommended to uncover other predictors of the onset of action and duration of LA. © 2018 Eur J Oral Sci.

Delaminating and restacking MgAl-layered double hydroxide monitored and characterized by a range of instrumental methods

Science.gov (United States)

Muráth, Szabolcs; Somosi, Zoltán; Tóth, Ildikó Y.; Tombácz, Etelka; Sipos, Pál; Pálinkó, István

2017-07-01

The delamination-restacking properties of MgAl-layered double hydroxide (MgAl-LDH) were studied in various solvents. The LDH samples were successfully delaminated in polar amides (formamide, N-methylformamide, N-methylacetamide). Usually, delamination was finalized by ultrasonic treatment. As rehydrating solutions, numerous Na-salts with single-, double- and triple-charged anions were used. Reconstruction was accomplished with anions of one or two negative charges, but triple-charged ones generally disrupted the rebuilding process, likely, because their salts with the metals of the LDH are very stable, and the thin layers can more readily transform to salts than the ordered materials. Samples and delamination-restacking processes were characterized by X-ray diffractometry (XRD), infrared spectroscopy (IR), dynamic light scattering (DLS), scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX).

The ‘Sticky Elastica’: delamination blisters beyond small deformations

KAUST Repository

Wagner, Till J. W.; Vella, Dominic

2013-01-01

We consider the form of an elastic loop adhered to a rigid substrate: the 'Sticky Elastica'. In contrast to previous studies of the shape of delamination 'blisters', the theory developed accounts for deflections with large slope (i.e. geometrically

SozRank: A new approach for localizing the epileptic seizure onset zone.

Science.gov (United States)

Murin, Yonathan; Kim, Jeremy; Parvizi, Josef; Goldsmith, Andrea

2018-01-01

Epilepsy is one of the most common neurological disorders affecting about 1% of the world population. For patients with focal seizures that cannot be treated with antiepileptic drugs, the common treatment is a surgical procedure for removal of the seizure onset zone (SOZ). In this work we introduce an algorithm for automatic localization of the seizure onset zone (SOZ) in epileptic patients based on electrocorticography (ECoG) recordings. The proposed algorithm builds upon the hypothesis that the abnormal excessive (or synchronous) neuronal activity in the brain leading to seizures starts in the SOZ and then spreads to other areas in the brain. Thus, when this abnormal activity starts, signals recorded at electrodes close to the SOZ should have a relatively large causal influence on the rest of the recorded signals. The SOZ localization is executed in two steps. First, the algorithm represents the set of electrodes using a directed graph in which nodes correspond to recording electrodes and the edges' weights quantify the pair-wise causal influence between the recorded signals. Then, the algorithm infers the SOZ from the estimated graph using a variant of the PageRank algorithm followed by a novel post-processing phase. Inference results for 19 patients show a close match between the SOZ inferred by the proposed approach and the SOZ estimated by expert neurologists (success rate of 17 out of 19).

SozRank: A new approach for localizing the epileptic seizure onset zone.

Directory of Open Access Journals (Sweden)

Yonathan Murin

2018-01-01

Full Text Available Epilepsy is one of the most common neurological disorders affecting about 1% of the world population. For patients with focal seizures that cannot be treated with antiepileptic drugs, the common treatment is a surgical procedure for removal of the seizure onset zone (SOZ. In this work we introduce an algorithm for automatic localization of the seizure onset zone (SOZ in epileptic patients based on electrocorticography (ECoG recordings. The proposed algorithm builds upon the hypothesis that the abnormal excessive (or synchronous neuronal activity in the brain leading to seizures starts in the SOZ and then spreads to other areas in the brain. Thus, when this abnormal activity starts, signals recorded at electrodes close to the SOZ should have a relatively large causal influence on the rest of the recorded signals. The SOZ localization is executed in two steps. First, the algorithm represents the set of electrodes using a directed graph in which nodes correspond to recording electrodes and the edges' weights quantify the pair-wise causal influence between the recorded signals. Then, the algorithm infers the SOZ from the estimated graph using a variant of the PageRank algorithm followed by a novel post-processing phase. Inference results for 19 patients show a close match between the SOZ inferred by the proposed approach and the SOZ estimated by expert neurologists (success rate of 17 out of 19.

Structural health monitoring strategy for detection of interlaminar delamination in composite plates

International Nuclear Information System (INIS)

Quaegebeur, N; Micheau, P; Masson, P; Maslouhi, A

2010-01-01

In this paper, a structural health monitoring strategy for detecting interlaminar delamination in a carbon fiber reinforced polymer structure using Lamb waves is proposed. The delamination is simulated by inserting a Teflon tape between two transverse plies and the Lamb wave generation and measurement is enabled by using piezoceramic elements. The Lamb wave theoretical propagation and through thickness strain distribution are studied, in order to determine the optimal configuration of the final system in terms of mode and frequency selection, and piezoceramic sizing and spacing, for detection of cross-sectional delamination. Pitch and catch measurements are performed by comparing wave propagations for different frequencies and along damaged and undamaged paths of the structure, and the analysis of results is performed using the reassigned short time Fourier transform. It appears that in the low frequency range (below 300 kHz), the A0 mode is sensitive to the damage, while in the high frequency range, S1 and A1 modes are both very sensitive to the damage while the propagation of the S0 mode is not affected very much

Identification of delamination interface in composite laminates using scattering characteristics of lamb wave: numerical and experimental studies

Science.gov (United States)

Singh, Rakesh Kumar; Ramadas, C.; Balachandra Shetty, P.; Satyanarayana, K. G.

2017-04-01

Considering the superior strength properties of polymer based composites over metallic materials, they are being used in primary structures of aircrafts. However, these polymeric materials are much more complex in behaviour due to their structural anisotropy along with existence of different materials unlike in metallic alloys. These pose challenge in flaw detection, residual strength determination and life of a structure with their high susceptibility to impact damage in the form of delaminations/disbonds or cracks. This reduces load-bearing capability and potentially leads to structural failure. With this background, this study presents a method to identify location of delamination interface along thickness of a laminate. Both numerical and experimental studies have been carried out with a view to identify the defect, on propagation, mode conversion and scattering characteristics of fundamental anti-symmetric Lamb mode (Ao) when it passed through a semi-infinite delamination. Further, the reflection and transmission scattering coefficients based on power and amplitude ratios of the scattered waves have been computed. The methodology was applied on numerically simulated delaminations to illustrate the efficacy of the method. Results showed that it could successfully identify delamination interface.

THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DELAMINATION AT DRILLING OF PRE-LAMINATED PARTICLEBOARD

Directory of Open Access Journals (Sweden)

Mihai ISPAS

2015-12-01

Full Text Available Pre-laminated particleboard is a wood based composite extensively used in the furniture industry. Drilling is the most common machining process which prepares the panels for joining using twist/helical drills in the absolute majority of cases. The point angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the delamination tendency of the pre-laminated particleboard. The objective of this study was to measure and analyze the influence of the two above-mentioned factors on the processing quality, evaluated by de size of delaminations, both, at the entrance side and the exit side of the drill bit. To assess the defect, two parameters were used: the delamination factor and the effective area of delamination. The results showed that, in general, the combination of small point angle with low feed rate minimizes the delamination of pre-laminated particleboard panels at drilling.

Time dependent response of low velocity impact induced composite conical shells under multiple delamination

Science.gov (United States)

Dey, Sudip; Karmakar, Amit

2014-02-01

This paper presents the time dependent response of multiple delaminated angle-ply composite pretwisted conical shells subjected to low velocity normal impact. The finite element formulation is based on Mindlin's theory incorporating rotary inertia and effects of transverse shear deformation. An eight-noded isoparametric plate bending element is employed to satisfy the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front. A multipoint constraint algorithm is incorporated which leads to asymmetric stiffness matrices. The modified Hertzian contact law which accounts for permanent indentation is utilized to compute the contact force, and the time dependent equations are solved by Newmark's time integration algorithm. Parametric studies are conducted with respect to triggering parameters like laminate configuration, location of delamination, angle of twist, velocity of impactor, and impactor's displacement for centrally impacted shells.

Laser micromachining of indium tin oxide films on polymer substrates by laser-induced delamination

International Nuclear Information System (INIS)

Willis, David A; Dreier, Adam L

2009-01-01

A Q-switched neodymium : yttrium-aluminium-garnet (Nd : YAG) laser was used to ablate indium tin oxide (ITO) thin films from polyethylene terephthalate substrates. Film damage and partial removal with no evidence of a melt zone was observed above 1.7 J cm -2 . Above the film removal threshold (3.3 J cm -2 ) the entire film thickness was removed without substrate damage, suggesting that ablation was a result of delamination of the film in the solid phase. Measurements of ablated fragment velocities near the ablation threshold were consistent with calculations of velocities caused by stress-induced delamination of the ITO film, except for a high velocity component at higher fluences. Nanosecond time-resolved shadowgraph photography revealed that the high velocity component was a shock wave induced by the rapid compression of ambient air when the film delaminated.

Enhancement of delamination strength in Cu-stabilized coated conductor tapes through additional treatments under transverse tension at room temperature

Energy Technology Data Exchange (ETDEWEB)

Shin, Hyung Seop; Bautista, Zhierwinjay [Andong National University, Andong (Korea, Republic of); Moon, Seung Hyun; Lee, Jae Hun; Mean, Byoung Jean [SuNAM Co Ltd., Anseong (Korea, Republic of)

2017-06-15

In superconducting coil applications particularly in wet wound coils, coated conductor (CC) tapes are subjected to different type of stresses that could affect its electromechanical transport property. These include hoop stress acting along the length of the CC tape and the Lorentz force acting perpendicular to the CC tape’s surface. Since the latter is commonly associated with the delamination problem of multi-layered REBCO CC tapes, more understanding and attention on the delamination phenomena induced in the case of coil applications are needed. Difference on the coefficient of thermal expansion (CTE) of each constituent layer of the CC tape, the bobbin, and the impregnating materials is the main causes of delamination in CC tapes when subjected to thermal and mechanical cycling. In the design of degradation-free superconducting coils, therefore, characterization of the delamination behaviors including mechanism and strength in the multi-layered REBCO CC tapes becomes a critical issue. Various trials to increase the delamination strength by improving interface characteristics at interlayers have been performed. In this study, in order to investigate the influences of laser cleaning and Ag annealing treated at the substrate side surface, transverse tensile tests were conducted under different sample configurations using 4.5mm x 8 mm upper anvil. The mechanical delamination strength of differently processed CC samples was examined at room temperature (RT). As a result, the Sample 1 with the additional laser cleaning and Ag annealing processes and the Sample 2 with additional Ag annealing process only showed higher mechanical delamination strength as compared to the Sample 3 without such additional treatments. Sample 3 showed quite different behavior when the loading direction is to the substrate side where the delamination strength much lower as compared to other cases.

Dynamic behavior of a rotating delaminated composite beam including rotary inertia and shear deformation effects

Directory of Open Access Journals (Sweden)

Ramazan-Ali Jafari-Talookolaei

2015-09-01

Full Text Available A finite element (FE model is developed to study the free vibration of a rotating laminated composite beam with a single delamination. The rotary inertia and shear deformation effects, as well as the bending–extension, bending–twist and extension–twist coupling terms are taken into account in the FE model. Comparison between the numerical results of the present model and the results published in the literature verifies the validity of the present model. Furthermore, the effects of various parameters, such as delamination size and location, fiber orientation, hub radius, material anisotropy and rotating speed, on the vibration of the beam are studied in detail. These results provide useful information in the study of the free vibration of rotating delaminated composite beams.

Delamination and debonding failure of laminated composite T-joints

NARCIS (Netherlands)

Cui, H.

2014-01-01

Composites are increasingly being used in aerospace, automotive and other industries. The T-joint (also named stringer stiffened skin) is a typical connection, broadly used in thin-walled structures, such as the wing and fuselage of aircraft. This thesis presents the analysis of the delamination and

Identification of Delamination in Concrete Slabs by SIBIE Procedure

International Nuclear Information System (INIS)

Yamada, M.; Yagi, Y.; Ohtsu, M.

2017-01-01

The Impact-Echo method is known as a non-destructive testing for concrete structures. The technique is based on the use of low-frequency elastic waves that propagate in concrete to determine the thickness and to detect internal flaws in concrete. The presence and locations of defects in concrete are estimated from identifying peak frequencies in the frequency spectra, which are responsible for the resonance due to time-of-flight from the defects. In practical applications, however, obtained spectra include so many peak frequencies that it is fairly difficult to identify the defects correctly. In order to improve the Impact-Echo method, Stack Imaging of spectral amplitudes Based on Impact-Echo (SIBIE) procedure is developed as an imaging technique applied to the Impact-Echo data, where defects in concrete are identified visually at the cross-section. In this study, the SIBIE procedure is applied to identify the delamination in a concrete slab. It is demonstrated that the delamination can be identified with reasonable accuracy. (paper)

Delamination of neural crest cells requires transient and reversible Wnt inhibition mediated by Dact1/2.

Science.gov (United States)

Rabadán, M Angeles; Herrera, Antonio; Fanlo, Lucia; Usieto, Susana; Carmona-Fontaine, Carlos; Barriga, Elias H; Mayor, Roberto; Pons, Sebastián; Martí, Elisa

2016-06-15

Delamination of neural crest (NC) cells is a bona fide physiological model of epithelial-to-mesenchymal transition (EMT), a process that is influenced by Wnt/β-catenin signalling. Using two in vivo models, we show that Wnt/β-catenin signalling is transiently inhibited at the time of NC delamination. In attempting to define the mechanism underlying this inhibition, we found that the scaffold proteins Dact1 and Dact2, which are expressed in pre-migratory NC cells, are required for NC delamination in Xenopus and chick embryos, whereas they do not affect the motile properties of migratory NC cells. Dact1/2 inhibit Wnt/β-catenin signalling upstream of the transcriptional activity of T cell factor (TCF), which is required for EMT to proceed. Dact1/2 regulate the subcellular distribution of β-catenin, preventing β-catenin from acting as a transcriptional co-activator to TCF, yet without affecting its stability. Together, these data identify a novel yet important regulatory element that inhibits β-catenin signalling, which then affects NC delamination. © 2016. Published by The Company of Biologists Ltd.

Analysis of a 'barb test' for measuring the mixed-mode delamination toughness of coatings

International Nuclear Information System (INIS)

Liu Yufu; Kagawa, Y.; Evans, A.G.

2008-01-01

The durability of thermal barrier coatings (TBCs) employed in most turbine engines is limited by delamination, both within the coating and at the coating-substrate interface. A test used for evaluating the mixed-mode toughness pertinent to such delaminations has been fully-analyzed by determining the steady-state energy release rate, the mode mixity and the critical length for buckling. An analytic solution based on beam theory establishes basic estimates and scaling relationships. Selected finite-element calculations have been used to affirm the fidelity of the results. The energy release rate attains steady-state, but the phase angle changes throughout because of a small (but significant) bending moment induced at the supports. The coating buckles at a critical delamination length, whereupon the energy release rate increases rapidly and violates steady state. The solutions are used to re-interpret measurements reported in the literature for an electron beam physically deposited TBC

Study on drilling induced delamination of woven kenaf fiber reinforced epoxy composite using carbide drills

Science.gov (United States)

Suhaily, M.; Hassan, C. H. Che; Jaharah, A. G.; Azmi, H.; Afifah, M. A.; Khairusshima, M. K. Nor

2018-04-01

In this research study, it presents the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates when using the carbide drill bits. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated carbide drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs. The results indicated that the drill diameter has a significant influence on the delamination when drilling the woven kenaf fiber reinforced epoxy composites.

Characterization of Blistering and Delamination in Depleted Uranium Hohlraums

Energy Technology Data Exchange (ETDEWEB)

Biobaum, K. J. M.

2013-03-01

Blistering and delamination are the primary failure mechanisms during the processing of depleted uranium (DU) hohlraums. These hohlraums consist of a sputter-deposited DU layer sandwiched between two sputter-deposited layers of gold; a final thick gold layer is electrodeposited on the exterior. The hohlraum is deposited on a copper-coated aluminum mandrel; the Al and Cu are removed with chemical etching after the gold and DU layers are deposited. After the mandrel is removed, blistering and delamination are observed on the interiors of some hohlraums, particularly at the radius region. It is hypothesized that blisters are caused by pinholes in the copper and gold layers; etchant leaking through these holes reaches the DU layer and causes it to oxidize, resulting in a blister. Depending on the residual stress in the deposited layers, blistering can initiate larger-scale delamination at layer interfaces. Scanning electron microscopy indicates that inhomogeneities in the machined aluminum mandrel are replicated in the sputter-deposited copper layer. Furthermore, the Cu layer exhibits columnar growth with pinholes that likely allow etchant to come in contact with the gold layer. Any inhomogeneities or pinholes in this initial gold layer then become nucleation sites for blistering. Using a focused ion beam system to etch through the gold layer and extract a cross-sectional sample for transmission electron microscopy, amorphous, intermixed layers at the gold/DU interfaces are observed. Nanometer-sized bubbles in the sputtered and electrodeposited gold layers are also present. Characterization of the morphology and composition of the deposited layers is the first step in determining modifications to processing parameters, with the goal of attaining a significant improvement in hohlraum yield.

Detection of Delamination in Laminate Wind Turbine Blades Using One-Dimensional Wavelet Analysis of Modal Responses

Directory of Open Access Journals (Sweden)

Łukasz Doliński

2018-01-01

Full Text Available This paper demonstrates the effectiveness of a nondestructive diagnostic technique used to determine the location and size of delamination in laminated coatings of wind turbine blades. This is realized based on results of numerical and experimental investigations obtained by the use of the finite element method (FEM and laser scanning vibrometry (LSV. The proposed method is based on the one-dimensional continuous wavelet transform of vibration parameters of a wind turbine blade. The investigations were conducted for a 1 : 10 scaled-down blade of a 36 m rotor wind turbine. Glass fibres and epoxy resin were used as laminate components. For numerical studies, a simple delamination model was proposed. The results obtained by the authors were used to determine the optimal set of parameters of the continuous wavelet transform. The application of high-quality LSV for experimental measurements allowed determining the optimal conditions of measuring procedures. At the same time the capabilities and limitations, resulting from the nature of the measurement method, were identified. In order to maximize the effectiveness of the detection method, preliminary signal processing was performed. Beside base wavelets also different waveform families were tested. The results obtained by the authors showed that it is possible to identify and localize even relatively small damage.

Faster onset time of supraclavicular brachial plexus block using local anesthetic diluted with dextrose

Directory of Open Access Journals (Sweden)

Hong Jin Lim

Full Text Available Abstract Background and objectives: A high sodium concentration is known to antagonize local anesthetics when infiltrated around neural tissue. Thus, we hypothesized that the onset time for sensory and motor blockade, in supraclavicular brachial plexus block using ropivacaine diluted with dextrose would be shorter than with saline. Methods: Patients scheduled for upper limb surgery were randomized to receive ultrasound guided supraclavicular brachial plexus block with 0.5% ropivacaine. Evaluation of sensory and motor blockade was performed every 5 min for 60 min. Patients were followed-up on postoperative day 1, and between days 7 and 10 for the presence of any complications. Twenty-five patients in each group were analyzed. Results: Mean time for onset of analgesia for the dextrose group was 37.6 ± 12.9 min while the mean time for the saline group was 45.2 ± 13.9 min with a p-value of 0.05. The effect size was 0.567, which was moderate to large. No major complications were observed. Conclusion: We conclude that there was a decrease in onset time of analgesia when dextrose was used as a diluent instead of saline for ultrasound guided supraclavicular block.

Delamination Resistance Of Laminate Made With VBO MTM46/HTS Prepreg

Directory of Open Access Journals (Sweden)

Czarnocki Piotr

2015-09-01

Full Text Available A laminate made with the Vacuum Bag Only (VBO prepregs can be cured out of autoclave. Because of low curing pressure such a process can result in deterioration of laminate mechanical properties. They can be significantly lower than those displayed by the autoclave cured ones. The resistance against delamination can be among the most affected. Since this property is a week point of all the laminates it was of particular interest. Delamination resistance of unidirectional laminate made from VBO MTM46/HTS(12K prepreg was in the scope of the presented research and the critical values of the Strain Energy Release Rates and the Paris-type equations corresponding to Mode I, Mode II and Mixed-Mode I/II static and cyclic loadings, respectively, were determined.

An enriched cohesive zone model for delamination in brittle interfaces

NARCIS (Netherlands)

Samimi, M.; Dommelen, van J.A.W.; Geers, M.G.D.

2009-01-01

Application of standard cohesive zone models in a finite element framework to simulate delamination in brittle interfaces may trigger non-smooth load-displacement responses that lead to the failure of iterative solution procedures. This non-smoothness is an artifact of the discretization; and hence

High acidity unilamellar zeolite MCM-56 and its pillared and delaminated derivatives.

Science.gov (United States)

Gil, Barbara; Makowski, Wacław; Marszalek, Bartosz; Roth, Wieslaw J; Kubu, Martin; Čejka, Jiři; Olejniczak, Zbigniew

2014-07-21

The unilamellar form of zeolite MWW, MCM-56, which is obtained by direct hydrothermal synthesis has been studied with regard to acidity and porosity in its original and post-synthesis modified pillared and delaminated forms. The acidity measured by FTIR was found to be only slightly lower than the highly active 3-D MWW forms, MCM-22 and MCM-49. Pivalonitrile adsorption, which is a measure of spatial openness, showed 50% accessibility vs. MCM-22/49. It highlights the potential of MCM-56 as a layered material with increased access to acid sites because it does not entail laborious post-synthesis modification. Swelling, pillaring and delamination of MCM-56 are facile but result in a reduction in the number of Brønsted acid sites (BAS) while increasing accessibility to pivalonitrile. The delamination procedure involving sonication and acidification of the highly basic mother liquor produces the most visible increase in surface area and access to all BAS. The accompanying doubling of the solid yield and the decrease in absolute number of BAS suggest significant precipitation of dissolved silica generated during swelling and sonication in high pH medium. The viability of separating surfactant covered layers upon sonication with the consequence of exposing hydrophobic hydrocarbon tails to aqueous environment is addressed.

Floating Node Method and Virtual Crack Closure Technique for Modeling Matrix Cracking-Delamination Migration

Science.gov (United States)

DeCarvalho, Nelson V.; Chen, B. Y.; Pinho, Silvestre T.; Baiz, P. M.; Ratcliffe, James G.; Tay, T. E.

2013-01-01

A novel approach is proposed for high-fidelity modeling of progressive damage and failure in composite materials that combines the Floating Node Method (FNM) and the Virtual Crack Closure Technique (VCCT) to represent multiple interacting failure mechanisms in a mesh-independent fashion. In this study, the approach is applied to the modeling of delamination migration in cross-ply tape laminates. Delamination, matrix cracking, and migration are all modeled using fracture mechanics based failure and migration criteria. The methodology proposed shows very good qualitative and quantitative agreement with experiments.

Potential-Induced Degradation-Delamination Mode in Crystalline Silicon Modules: Preprint

Energy Technology Data Exchange (ETDEWEB)

Hacke, Peter L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kempe, Michael D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wohlgemuth, John [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Li, Jichao [SunPower Corporation; Shen, Yu-Chen [SunPower Corporation

2018-03-21

A test sequence producing potential-induced degradation-delamination (PID-d) in crystalline silicon modules has been tested and found comparable under visual inspection to cell/encapsulant delamination seen in some fielded modules. Four commercial modules were put through this sequence, 85 degrees C, 85%, 1000 h damp heat, followed by an intensive PID stress sequence of 72 degrees C, 95% RH, and -1000 V, with the module face grounded using a metal foil. The 60 cell c-Si modules exhibiting the highest current transfer (4.4 center dot 10-4 A) exhibited PID-d at the first inspection after 156 h of PID stress. Effects promoting PID-d are reduced adhesion caused by damp heat, sodium migration further reducing adhesion to the cells, and gaseous products of electrochemical reactions driven by the applied system voltage. A new work item proposal for an IEC test standard to evaluate for PID-d is anticipated.

Role of Delamination in Zeolite-Catalyzed Aromatic Alkylation: UCB-3 versus 3-D Al-SSZ-70

Energy Technology Data Exchange (ETDEWEB)

Runnebaum, Ron C.; Ouyang, Xiaoying; Edsinga, Jeffrey A.; Rea, Thomas; Arslan, Ilke; Hwang, Son-Jong; Zones, Stacey I.; Katz, Alexander

2014-07-03

Delaminated zeolite UCB-3 exhibits 2.4-fold greater catalytic activity relative to its three-dimensional (3D) zeolite counterpart, Al-SSZ-70, and 2.0-fold greater activity (per catalyst mass) when compared with industrial catalyst MCM-22, for the alkylation of toluene with propylene at 523 K. The former increase is nearly equal to the observed relative increase in external surface area and acid sites upon delamination. However, at 423 K for the same reaction, UCB-3 exhibits a 3.5-fold greater catalytic activity relative to 3D Al-SSZ-70. The higher relative rate enhancement for the delaminated material at lower temperature can be elucidated on the basis of increased contributions from internal acid sites. Evidence of possible contributions from such acid sites is obtained by performing catalysis after silanation treatment, which demonstrates that although virtually all catalysis in MCM-22 occurs on the external surface, catalysis also occurs on internal sites for 3D Al-SSZ-70. The additional observed enhancement at low temperatures can therefore be rationalized by greater access to internal active sites as a result of sheet breakage during delamination. Such breakage leads to shorter characteristic internal diffusion paths and was visualized using TEM comparisons of UCB-3 and 3D Al-SSZ-70.

The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites

Directory of Open Access Journals (Sweden)

Garcia Cristobal

2018-01-01

Full Text Available Vibrations are responsible for a considerable number of accidents in aircrafts, bridges and other civil engineering structures. Therefore, there is a need to reduce the vibrations on structures made of composite materials. Delamination is a particularly dangerous failure mode for composite materials because delaminated composites can lose up to 60% of their strength and stiffness and still remain unchanged. One of the methods to suppress vibrations and preventing delamination is to incorporate nanofibers into the composite laminates. The aim of the present work is to investigate how nylon nanofibers affect the dynamic behaviour and delamination resistance of glass fibre reinforced polymer (GFRP composites. Experiments and numerical simulations using finite element modelling (FEM analysis are used to estimate the natural frequencies, the damping ratio and inter-laminar strength in GFRP composites with and without nylon nanofibers. It is found that the natural frequencies of the nylon nano-modified composites do not change significantly as compared to the traditional composites. However, nano-modified composites demonstrated a considerable increase in damping ratio and inter-laminar shear strength due to the incorporation of nylon nanofibers. This work contributes to the knowledge about the mechanical and dynamic properties of glass fibre reinforced polymer (GFRP composites with nylon nanofibers.

Faster onset time of supraclavicular brachial plexus block using local anesthetic diluted with dextrose.

Science.gov (United States)

Lim, Hong Jin; Hasan, Mohd Shahnaz; Chinna, Karuthan

2016-01-01

A high sodium concentration is known to antagonize local anesthetics when infiltrated around neural tissue. Thus, we hypothesized that the onset time for sensory and motor blockade, in supraclavicular brachial plexus block using ropivacaine diluted with dextrose would be shorter than with saline. Patients scheduled for upper limb surgery were randomized to receive ultrasound guided supraclavicular brachial plexus block with 0.5% ropivacaine. Evaluation of sensory and motor blockade was performed every 5min for 60min. Patients were followed-up on postoperative day 1, and between days 7 and 10 for the presence of any complications. Twenty-five patients in each group were analyzed. Mean time for onset of analgesia for the dextrose group was 37.6±12.9min while the mean time for the saline group was 45.2±13.9min with a p-value of 0.05. The effect size was 0.567, which was moderate to large. No major complications were observed. We conclude that there was a decrease in onset time of analgesia when dextrose was used as a diluent instead of saline for ultrasound guided supraclavicular block. Copyright © 2015 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.

Mode I fatigue delamination growth in composite laminates with fibre bridging

NARCIS (Netherlands)

Yao, L.

2015-01-01

Advanced composite materials have been commonly used in aerospace engineering, because of their good mechanical properties and attractive potential for creating lightweight structures. Susceptibility to delamination is one of the most important issues in the applications of these materials. This

Zr-doped TiO{sub 2} supported on delaminated clay materials for solar photocatalytic treatment of emerging pollutants

Energy Technology Data Exchange (ETDEWEB)

Belver, C., E-mail: carolina.belver@uam.es; Bedia, J.; Rodriguez, J.J.

2017-01-15

Highlights: • Novel Zr-doped TiO{sub 2} delaminated clay materials were prepared by a sol-gel process. • Zr is incorporated into the anatase lattice. • Zr-TiO{sub 2} nanoparticles are homogenously distributed over the delaminated clay. • Zr doping enhances the photoactivity by reducing the band gap. • Degradation rates were favored at low concentrations and high radiation intensities. - Abstract: Solar light-active Zr-doped TiO{sub 2} nanoparticles were successfully immobilized on delaminated clay materials by a one-step sol-gel route. Fixing the amount of TiO{sub 2} at 65 wt.%, this work studies the influence of Zr loading (up to 2%) on the photocatalytic activity of the resulting Zr-doped TiO{sub 2}/clay materials. The structural characterization demonstrates that all samples were formed by a delaminated clay with nanostructured anatase assembled on its surface. The Zr dopant was successfully incorporated into the anatase lattice, resulting in a slight deformation of the anatase crystal and the reduction of the band gap. These materials exhibit high surface area with a disordered mesoporous structure formed by TiO{sub 2} particles (15–20 nm) supported on a delaminated clay. They were tested in the solar photodegradation of antipyrine, usually used as an analgesic drug and selected as an example of emerging pollutant. High degradation rates have been obtained at low antipyrine concentrations and high solar irradiation intensities with the Zr-doped TiO{sub 2}/clay catalyst, more effective than the undoped one. This work demonstrates the potential application of the synthesis method for preparing novel and efficient solar-light photocatalysts based on metal-doped anatase and a delaminated clay.

Termovision and electricity capacitance measurements as a evaluation of a helicopter rotor’s blades delamination

Directory of Open Access Journals (Sweden)

Gębura Andrzej

2015-12-01

Full Text Available The article presents essential elements reached during investigations of heat section of rotor blades which have been done in AFIT. The investigations were related to a valuation of helicopter’s rotor blades delamination. They used a method of thermal field measurement as well as a electricity capacitance between an airframe and a heat element of the installation. A suggestion of such measurements appeared during the disassembly of rotor blade heat sections when some local unglue of heat element’s tape from the structure of blade’s heating pack has seen. Spots nearby separation of adhesive are a potential area of a local temperature increase, both the electric heating element and the mechanical structure of the blade. This is especially dangerous for composite structures. Overheated composite structures characterized by reduced flexibility and becomes prone to cracking. Therefore, the possibility of non-invasive monitoring adhesive spots, without removing the blades would be particularly useful.

Microwave detection of delaminations between fiber reinforced polymer (FRP) composite and hardened cement paste

Science.gov (United States)

Hughes, D.; Kazemi, M.; Marler, K.; Zoughi, R.; Myers, J.; Nanni, A.

2002-05-01

Fiber reinforced polymer (FRP) composites are increasingly being used for the rehabilitation of concrete structures. Detection and characterization of delaminations between an FRP composite and a concrete surface are of paramount importance. Consequently, the development of a one sided, non-contact, real time and rapid nondestructive testing (NDT) technique for this purpose is of great interest. Near-field microwave NDT techniques, using open-ended rectangular waveguide probes, have shown great potential for detecting delaminations in layered composite structures such as these. The results of some theoretical and experimental investigations on a specially prepared cement paste specimen are presented here.

Microfractographic analysis of delamination growth in fatigue loaded - carbon fibre/thermosetting matrix composites; Mikrofraktographische Analyse des Delaminationswachstums in zyklisch belasteten Kohlenstoffaser/Duroplastharz-Verbundwerkstoffen

Energy Technology Data Exchange (ETDEWEB)

Heutling, F.; Franz, H.E. [Daimler-Benz AG, Muenchen (Germany); Friedrich, K. [Kaiserslautern Univ. (Germany). Inst. for Composite Materials Ltd.

1998-05-01

Carbon-fibre-reinforced plastics (CFRP) are known to be considerably less sensitive to fatigue loading than aluminium (Al) alloys, for instance. However, even in the presence of small delaminations, the damage tolerance of structural components may be considerably reduced. The scope of the present contribution is to investigate fatigue phenomena in CFRP materials (with thermosetting matrix) by means of microfractography. The microfractographic features of the fracture surfaces mirror the processes of deformation and fracture at the delamination front. The fatigue fracture behaviour of a CFRP laminate subjected to cyclic mixed-mode loading is determined by matrix-controlled failure mechanisms. Under pure mode-II loading conditions, rollers in addition to fatigue striations appear in the fibre imprints whose formation mechanism was explained by means of high-resolution field-emission scanning electron microscopy (FE-SEM). The ratio between the local tensile and shear stress components influences the propagation direction of secondary cracks originating at the fibres. The local fracture propagations in these secondary cracks can be recognised through the fatigue striations appearing on the surface of the matrix. A comparison with static mixed-mode loading reveals that in both cases the crack propagation follows the path of the local maximum main stress. Applying mathematical relationships derived from the theory of elasticity permitted developing a mixed-mode loading model which makes it possible to predict the crack processes and hence to explain the formation of typical fracture-morphological features. (orig.) 26 refs.

3D finite element analysis of stress distributions and strain energy release rates for adhesive bonded flat composite lap shear joints having pre-existing delaminations

Energy Technology Data Exchange (ETDEWEB)

Parida, S. K.; Pradhan, A. K. [Indian Institute of Technology, Bhubaneswar (India)

2014-02-15

The rate of propagation of embedded delamination in the strap adherend of lap shear joint (LSJ) made of carbon/epoxy composites has been evaluated employing three-dimensional non-linear finite elements. The delamination has been presumed to pre-exist in the thin resin layer between the first and second plies of the strap adherend. The inter-laminar peel and shear stress distributions have been studied in details and are seen to be predominantly three-dimensional in nature. The components of strain energy release rate (SERR) corresponding to the opening, sliding and cross sliding modes of delamination are significantly different at the two fronts of the embedded delamination. The sequential release of multi-point constraint (MPC) finite elements in the vicinity of the delamination fronts enables to simulate the growth of the delamination at either ends. This simulation procedure can be utilized effectively for evaluation of the status of the structural integrity of the bonded joints.

The concept of fatigue fracture toughness in fatigue delamination growth behavior

NARCIS (Netherlands)

Yao, L.; Alderliesten, R.C.; Benedictus, R.

2015-01-01

This paper provides a study on mode I fatigue delamination growth in composite laminates using energy principles. Experimental data has been obtained from fatigue tests conducted on Double Cantilever Beam (DCB) specimens at various stress ratios. A concept of fatigue fracture toughness is proposed

Minimizing and predicting delamination of southern plywood in exterior exposure

Science.gov (United States)

Peter Koch

1967-01-01

Southern pine plywood is substantially all being manufactured with phenolic glue for exterior use. Because panels must not delaminate in service, a reliable predictor of glueline durability is required. Drawing on the experience of the Douglas-fir plywood industry, southern manufacutrers have adopted as a predictor the percentage of wood failure(% WF) observed in...

Cracking and delamination of vapor-deposited tantalum films

International Nuclear Information System (INIS)

Fisher, R.M.; Duan, J.Z.; Liu, J.B.

1990-01-01

This paper reports on tantalum films which begin to crack and spall during vapor deposition on glass at a thickness of 180 nm. Islands and ribbons, 10 - 30 μm in size, delaminate by crack growth along the Ta/glass interface for several μm after which the crack penetrates into the glass to a depth of 0.5 - 1 μm and complete spalling occurs. X-ray diffraction showed that about 50% of the original bct, β-tantalum, phase had transformed to the bcc α-Ta phase. When Ta was deposited on glass that was first covered with 52 nm of copper, spalling was observed to begin at a thickness of 105 nm. In this case, the film first cracks and then peels along the Cu/glass interface and curls into scrolls indicating the presence of a small stress gradient. X-ray diffraction of the as-deposited film, and electron diffraction of ion-milled flakes, showed that the Ta films deposited on Cu-coated glass almost completely transform to bcc α-Ta. The critical thickness for delamination along the Cu/glass interface is about 1/2 that for cracking in the glass substrate when an intermediate layer of Cu is not present. All of the above findings are in good agreement with previous observations on Cr films

Delamination Mechanisms of Thermal and Environmental Barrier Coatings on SiC/SiC Ceramic Matrix Composites

Science.gov (United States)

Zhu, Dongming; Choi, Sung R.; Lee, Kang N.; Miller, Robert A.

2003-01-01

Advanced ceramic thermal harrier coatings will play an increasingly important role In future gas turbine engines because of their ability to effectively protect the engine components and further raise engine temperatures. However, the coating durability issue remains a major concern with the ever-increasing temperature requirements. In this paper, thermal cyclic response and delamination failure modes of a ZrO2-8wt%Y2O3 and mullite/BSAS thermaVenvironmenta1 barrier coating system on SiC/SiC ceramic matrix composites were investigated using a laser high-heat-flux technique. The coating degradation and delamination processes were monitored in real time by measuring coating apparent conductivity changes during the cyclic tests under realistic engine temperature and stress gradients, utilizing the fact that delamination cracking causes an apparent decrease in the measured thermal conductivity. The ceramic coating crack initiation and propagation driving forces under the cyclic thermal loads, in conjunction with the mechanical testing results, will be discussed.

Delamination Assessment Tool for Spacecraft Composite Structures

Science.gov (United States)

Portela, Pedro; Preller, Fabian; Wittke, Henrik; Sinnema, Gerben; Camanho, Pedro; Turon, Albert

2012-07-01

Fortunately only few cases are known where failure of spacecraft structures due to undetected damage has resulted in a loss of spacecraft and launcher mission. However, several problems related to damage tolerance and in particular delamination of composite materials have been encountered during structure development of various ESA projects and qualification testing. To avoid such costly failures during development, launch or service of spacecraft, launcher and reusable launch vehicles structures a comprehensive damage tolerance verification approach is needed. In 2009, the European Space Agency (ESA) initiated an activity called “Delamination Assessment Tool” which is led by the Portuguese company HPS Lda and includes academic and industrial partners. The goal of this study is the development of a comprehensive damage tolerance verification approach for launcher and reusable launch vehicles (RLV) structures, addressing analytical and numerical methodologies, material-, subcomponent- and component testing, as well as non-destructive inspection. The study includes a comprehensive review of current industrial damage tolerance practice resulting from ECSS and NASA standards, the development of new Best Practice Guidelines for analysis, test and inspection methods and the validation of these with a real industrial case study. The paper describes the main findings of this activity so far and presents a first iteration of a Damage Tolerance Verification Approach, which includes the introduction of novel analytical and numerical tools at an industrial level. This new approach is being put to the test using real industrial case studies provided by the industrial partners, MT Aerospace, RUAG Space and INVENT GmbH

Contribution to interplay between a delamination test and a sensory analysis of mid-range lipsticks.

Science.gov (United States)

Richard, C; Tillé-Salmon, B; Mofid, Y

2016-02-01

Lipstick is currently one of the most sold products of cosmetics industry, and the competition between the various manufacturers is significant. Customers mainly seek products with high spreadability, especially long-lasting or long wear on the lips. Evaluation tests of cosmetics are usually performed by sensory analysis. This can then represent a considerable cost. The object of this study was to develop a fast and simple test of delamination (objective method with calibrated instruments) and to interplay the obtained results with those of a discriminative sensory analysis (subjective method) in order to show the relevance of the instrumental test. Three mid-range lipsticks were randomly chosen and were tested. They were made of compositions as described by the International Nomenclature of Cosmetic Ingredients (INCI). Instrumental characterization was performed by texture profile analysis and by a special delamination test. The sensory analysis was voluntarily conducted with an untrained panel as blind test to confirm or reverse the possible interplay. The two approaches or methods gave the same type of classification. The high-fat lipstick had the worst behaviour with the delamination test and the worst notation of the intensity of descriptors with the sensory analysis. There is a high correlation between the sensory analysis and the instrumental measurements in this study. The delamination test carried out should permit to quickly determine the lasting (screening test) and in consequence optimize the basic formula of lipsticks. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

DETECTION OF DELAMINATION IN A COMPOSITE PLATE BY SEM

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

A numerical method of integration of Green's functi ons of strip element method (SEM) is proposed. The response of ultrasonic sourc e generated by a transducer on the surface of a multi-ply composite plate conta ining a delamination is analyzed by the use of SEM. The numerical results show that the scanning features of the ultrasonic waves may be used to identify the d elamination inside the composite plate .

Shadowgraph studies of laser-assisted non-thermal structuring of thin layers on flexible substrates by shock-wave-induced delamination processes

Energy Technology Data Exchange (ETDEWEB)

Lorenz, Pierre, E-mail: pierre.lorenz@iom-leipzig.de [Leibniz-Institut für Oberflächenmodifizierung e. V., Permoserstraße 15, 04318 Leipzig (Germany); Smausz, Tomi [Department of Optics and Quantum Electronics, University of Szeged, H-6720 Szeged, Dóm tér 9 (Hungary); MTA-SZTE Research Group on Photoacoustic Spectroscopy, University of Szeged, H-6720 Szeged, Dóm tér 9 (Hungary); Csizmadia, Tamas [Department of Optics and Quantum Electronics, University of Szeged, H-6720 Szeged, Dóm tér 9 (Hungary); Ehrhardt, Martin; Zimmer, Klaus [Leibniz-Institut für Oberflächenmodifizierung e. V., Permoserstraße 15, 04318 Leipzig (Germany); Hopp, Bela [Department of Optics and Quantum Electronics, University of Szeged, H-6720 Szeged, Dóm tér 9 (Hungary)

2015-05-01

Highlights: • The shock-wave-induced film delamination (SWIFD) is a laser patterning process. • The SWIFD process of CIGS solar cells was studied by shadowgraph measurements. • The study presented that SWIFD allows the structuring of CIGS solar cells. • The dynamics of the delamination process was analyzed. - Abstract: The laser-assisted microstructuring of thin films especially for electronic applications without damaging the layers or the substrates is a challenge for the laser micromachining techniques. The laser-induced thin-film patterning by ablation of the polymer substrate at the rear side that is called ‘SWIFD’ – shock-wave-induced film delamination patterning has been demonstrated. This study focuses on the temporal sequence of processes that characterize the mechanism of this SWIFD process on a copper indium gallium selenide (CIGS) solar cell stacks on polyimide. For this purpose high-speed shadowgraph experiments were performed in a pump probe experimental set-up using a KrF excimer laser for ablating the rear side of the polyimide substrate and measuring the shock wave generation at laser ablation of the polymer substrate as well as the thin-film delamination. The morphology and size of the thin-film structures were studied by scanning electron microscopy (SEM). Furthermore, the composition after the laser treatment was analyzed by energy dispersive X-ray (EDX) spectroscopy. The shadowgraph experiments allow the time-dependent identification and evaluation of the shock wave formation, substrate bending, and delamination of the thin film in dependence on the laser parameters. These results will contribute to improve the physical understanding of the laser-induced delamination effect for thin-film patterning.

Delamination measurement of a laminates composite panel due to hole punching based on the focus variation technique

Science.gov (United States)

Abdullah, A. B.; Zain, M. S. M.; Abdullah, M. S.; Samad, Z.

2017-07-01

Structural materials, such as composite panels, must be assembled, and such panels are typically constructed via the insertion of a fastener through a drilled hole. The main problem encountered in drilling is delamination, which affects assembly strength. The cost of drilling is also high because of the severe wear on drill bits. The main goal of this research is to develop a new punching method as an alternative to drilling during hole preparation. In this study, the main objective is to investigate the effect of different puncher profiles on the quality of holes punched into carbon fiber reinforcement polymer (CFRP) composite panels. Six types of puncher profiles were fabricated with minimum die clearance (1%), and two quality aspects, namely, incomplete shearing and delamination factor, were measured. The conical puncher incurred the least defects in terms of delamination and yielded an acceptable amount of incomplete shearing in comparison with the other punchers.

Surface modified MXene Ti_3C_2 multilayers by aryl diazonium salts leading to large-scale delamination

International Nuclear Information System (INIS)

Wang, Hongbing; Zhang, Jianfeng; Wu, Yuping; Huang, Huajie; Li, Gaiye; Zhang, Xin; Wang, Zhuyin

2016-01-01

Highlights: • A novel and simple method to delaminate MXene Ti_3C_2 multilayers. • Surface modification using aryl diazonium salts induced swelling that conversely weakened the bonds between MXene layers. • The grafting of phenylsulfonic acid groups on MXene surfaces resulted in excellent water dispersibility. - Abstract: Herein we report a simple and facile method to delaminate MXene Ti_3C_2 multilayers by the assistance of surface modification using aryl diazonium salts. The basic strategy involved the preparation of layered MAX Ti_3AlC_2 and the exfoliation of Ti_3AlC_2 into Ti_3C_2 multilayers, followed by Na"+ intercalation and surface modification using sulfanilic acid diazonium salts. The resulting chemically grafted Ti_3C_2 flakes were characterized by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to confirm the presence of the surface organic species. Ultraviolet-visible spectroscopy revealed that surface-modified MXene Ti_3C_2 sheets disperse well in water and the solutions obey Lambert–Beer’s law. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to demonstrate the morphology and structure of delaminating MXene Ti_3C_2 flakes. The results indicated that chemical modification for MXene multilayers by aryl diazonium salts induced swelling that conversely weakened the bonds between MX layers, hence leading to large-scale delamination of multilayered MXene Ti_3C_2via mild sonication. Advantages of the present approach rely not only on the simplicity and efficiency of the delamination procedure but also on the grafting of aryl groups to MXene surfaces, highly suitable for further applications of the newly discovered two-dimensional materials.

A negative modulatory role for rho and rho-associated kinase signaling in delamination of neural crest cells

Directory of Open Access Journals (Sweden)

Kalcheim Chaya

2008-10-01

Full Text Available Abstract Background Neural crest progenitors arise as epithelial cells and then undergo a process of epithelial to mesenchymal transition that precedes the generation of cellular motility and subsequent migration. We aim at understanding the underlying molecular network. Along this line, possible roles of Rho GTPases that act as molecular switches to control a variety of signal transduction pathways remain virtually unexplored, as are putative interactions between Rho proteins and additional known components of this cascade. Results We investigated the role of Rho/Rock signaling in neural crest delamination. Active RhoA and RhoB are expressed in the membrane of epithelial progenitors and are downregulated upon delamination. In vivo loss-of-function of RhoA or RhoB or of overall Rho signaling by C3 transferase enhanced and/or triggered premature crest delamination yet had no effect on cell specification. Consistently, treatment of explanted neural primordia with membrane-permeable C3 or with the Rock inhibitor Y27632 both accelerated and enhanced crest emigration without affecting cell proliferation. These treatments altered neural crest morphology by reducing stress fibers, focal adhesions and downregulating membrane-bound N-cadherin. Reciprocally, activation of endogenous Rho by lysophosphatidic acid inhibited emigration while enhancing the above. Since delamination is triggered by BMP and requires G1/S transition, we examined their relationship with Rho. Blocking Rho/Rock function rescued crest emigration upon treatment with noggin or with the G1/S inhibitor mimosine. In the latter condition, cells emigrated while arrested at G1. Conversely, BMP4 was unable to rescue cell emigration when endogenous Rho activity was enhanced by lysophosphatidic acid. Conclusion Rho-GTPases, through Rock, act downstream of BMP and of G1/S transition to negatively regulate crest delamination by modifying cytoskeleton assembly and intercellular adhesion.

Selective role of bainitic lath boundary in influencing slip systems and consequent deformation mechanisms and delamination in high-strength low-alloy steel

Science.gov (United States)

Liu, S.; Li, X.; Guo, H.; Yang, S.; Wang, X.; Shang, C.; Misra, R. D. K.

2018-04-01

We elucidate here the deformation behaviour and delamination phenomenon in a high-strength low-alloy bainitic steel, in terms of microstructure, texture and stress evolution during deformation via in situ electron back-scattered diffraction and electron microscopy. Furthermore, the selective role of bainitic lath boundary on slip systems was studied in terms of dislocation pile-up and grain boundary energy models. During tensile deformation, the texture evolution was concentrated at {1 1 0} and the laths were turn parallel to loading direction. The determining role of lath on the deformation behaviour is governed by length/thickness (l/t) ratio. When l/t > 28, the strain accommodates along the bainite lath rather than along the normal direction. The delamination crack initiated normal to (0 1 1) plane, and become inclined to (0 1 1) plane with continued strain along (0 1 1) plane and lath plane. This indicated that the delamination is not brittle process but plastic process. The lack of dimples at the delaminated surface is because of lack of strain normal to the direction of lath. The delaminated (0 1 1) planes were associated with cleavage along the (1 0 0) plane.

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

Science.gov (United States)

Nordendale, Nikolas A.; Goyal, Vinay K.; Lundgren, Eric C.; Patel, Dhruv N.; Farrokh, Babak; Jones, Justin; Fischetti, Grace; Segal, Kenneth N.

2015-01-01

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Buckle initiation and delamination of patterned ITO layers on a polymer substrate

NARCIS (Netherlands)

Abdallah, Amir; Bouten, P.C.P.; Toonder, den J.M.J.; With, de G.

2011-01-01

Buckle initiation and delamination of patterned ITO layers on a polymer substrate were studied. Various buckle modes have been observed depending on the type of etch defects and the crack patterns. The buckle density was found to be dependent on the number of etch defects, imperfections, applied

Surface modified MXene Ti3C2 multilayers by aryl diazonium salts leading to large-scale delamination

Science.gov (United States)

Wang, Hongbing; Zhang, Jianfeng; Wu, Yuping; Huang, Huajie; Li, Gaiye; Zhang, Xin; Wang, Zhuyin

2016-10-01

Herein we report a simple and facile method to delaminate MXene Ti3C2 multilayers by the assistance of surface modification using aryl diazonium salts. The basic strategy involved the preparation of layered MAX Ti3AlC2 and the exfoliation of Ti3AlC2 into Ti3C2 multilayers, followed by Na+ intercalation and surface modification using sulfanilic acid diazonium salts. The resulting chemically grafted Ti3C2 flakes were characterized by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to confirm the presence of the surface organic species. Ultraviolet-visible spectroscopy revealed that surface-modified MXene Ti3C2 sheets disperse well in water and the solutions obey Lambert-Beer's law. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to demonstrate the morphology and structure of delaminating MXene Ti3C2 flakes. The results indicated that chemical modification for MXene multilayers by aryl diazonium salts induced swelling that conversely weakened the bonds between MX layers, hence leading to large-scale delamination of multilayered MXene Ti3C2via mild sonication. Advantages of the present approach rely not only on the simplicity and efficiency of the delamination procedure but also on the grafting of aryl groups to MXene surfaces, highly suitable for further applications of the newly discovered two-dimensional materials.

Assessing the level of spatial homogeneity of the agronomic Indian monsoon onset

Science.gov (United States)

Fitzpatrick, Rory G. J.; Parker, Douglas J.; Willetts, Peter D.

2016-11-01

Over monsoon regions, such as the Indian subcontinent, the local onset of persistent rainfall is a crucial event in the annual climate for agricultural planning. Recent work suggested that local onset dates are spatially coherent to a practical level over West Africa; a similar assessment is undertaken here for the Indian subcontinent. Areas of coherent onset, defined as local onset regions or LORs, exist over the studied region. These LORs are significant up to the 95% confidence interval and are primarily clustered around the Arabian Sea (adjacent to and extending over the Western Ghats), the Monsoon Trough (north central India), and the Bay of Bengal. These LORs capture regions where synoptic scale controls of onset may be present and identifiable. In other regions, the absence of LORs is indicative of regions where local and stochastic factors may dominate onset. A potential link between sea surface temperature anomalies and LOR variability is presented. Finally, Kerala, which is often used as a representative onset location, is not contained within an LOR suggesting that variability here may not be representative of wider onset variability.

Partial delamination of continental mantle lithosphere, uplift-related crust mantle decoupling, volcanism and basin formation: a new model for the Pliocene Quaternary evolution of the southern East-Carpathians, Romania

Science.gov (United States)

Chalot-Prat, F.; Girbacea, R.

2000-11-01

A geodynamic model is proposed for the Mid-Miocene to Quaternary evolution of the southern East-Carpathians in order to explain the relationships between shallow and deep geological phenomena that occurred synchronously during late-collision tectonics. In this area, an active volcanic zone cross-cuts since 2 My the suture between the overriding Tisza-Dacia and subducting European continental plates. Mafic calc-alkaline and alkaline magmas (south Harghita and Persani volcanoes) erupted contemporaneously. These magmas were supplied by partial melting of the mantle lithosphere of the subducting, and not of the overriding, plate. In an effort to decipher this geodynamically a-typical setting of magma generation, the spatial and temporal distribution of shallow and deep phenomena was successively examined in order to establish the degree of their interdependence. Our model indicates that intra-mantle delamination of the subducting European plate is the principal cause of a succession of events. It caused upwelling of the hot asthenosphere below a thinned continental lithosphere of the Carpathians, inducing the uplift of the lithosphere and its internal decoupling at the Moho level by isostatic and mostly thermal effects. During this uplift, the crust deformed flexurally whilst the mantle deformed in a ductile way. This triggered decompressional partial melting of the uppermost mantle lithosphere. Flexural deformation of the crust induced its fracturing, allowing for the rapid ascent of magmas to the surface, as well as reactivation of an older detachment horizon at the base of the Carpathian nappe stack above which the Brasov, Ciuc and Gheorghieni hinterland basins formed by extension and gravity spreading. The rapid subsidence of the Focsani foreland basin is controlled by the load exerted on the lithosphere by the delaminated mantle slab that is still attached to it. In this model, crust-mantle decoupling, magma genesis and volcanism, local near-surface hinterland

Detecting closing delaminations in laminated composite plates using nonlinear structural intensity and time reversal mirrors

International Nuclear Information System (INIS)

Lamberti, Alfredo; Semperlotti, Fabio

2013-01-01

Closing delaminations in composite laminated structures exhibit a nonlinear dynamic response when excited by high frequency elastic waves. The contact acoustic nonlinear effects taking place at the damage interface act as a mechanism of energy redistribution from the driving frequency to the nonlinear harmonic frequencies. In this paper, we extend the concept of nonlinear structural intensity (NSI) to the analysis of closing delaminations in composite laminated plates. NSI is calculated using a method based on a combination of finite element and finite difference techniques, which is suitable for processing both numerical and experimental data. NSI is proven to be an effective metric to identify the presence and location of closing delaminations. The highly directional nature of orthotropic composites results in vibrational energy propagating in a different direction from that of the initial elastic wave. This aspect reduces the ability to effectively interrogate the damage and, therefore, the sensitivity to the damage. The time reversal mirror technique is explored as a possible approach to overcome the effect of the material directionality and increase the ability to interrogate the damage. Numerical simulations show that this technique is able to overcome the material directionality and to drastically enhance the ability to interrogate the damage. (paper)

Fatigue Crack and Delamination Growth in Fibre Metal Laminates under Variable Amplitude Loading

NARCIS (Netherlands)

Khan, S.

2013-01-01

This thesis presents the investigation into the fatigue propagation and delamination growth of Fibre Metal Laminates under variable amplitude loading. As explained in the first chapter, the motivation of the research is twofold: first, to obtain a clear understanding and detailed characterization of

Correlating bilayer tablet delamination tendencies to micro-environmental thermodynamic conditions during pan coating.

Science.gov (United States)

Zacour, Brian M; Pandey, Preetanshu; Subramanian, Ganeshkumar; Gao, Julia Z; Nikfar, Faranak

2014-06-01

The objective of this study was to determine the impact that the micro-environment, as measured by PyroButton data loggers, experienced by tablets during the pan coating unit operation had on the layer adhesion of bilayer tablets in open storage conditions. A full factorial design of experiments (DOE) with three center points was conducted to study the impact of final tablet hardness, film coating spray rate and film coating exhaust temperature on the delamination tendencies of bilayer tablets. PyroButton data loggers were placed (fixed) at various locations in a pan coater and were also allowed to freely move with the tablet bed to measure the micro-environmental temperature and humidity conditions of the tablet bed. The variance in the measured micro-environment via PyroButton data loggers accounted for 75% of the variance in the delamination tendencies of bilayer tablets on storage (R(2 )= 0.75). A survival analysis suggested that tablet hardness and coating spray rate significantly impacted the delamination tendencies of the bilayer tablets under open storage conditions. The coating exhaust temperature did not show good correlation with the tablets' propensity to crack indicating that it was not representative of the coating micro-environment. Models created using data obtained from the PyroButton data loggers outperformed models created using primary DOE factors in the prediction of bilayer tablet strength, especially upon equipment or scale transfers. The coating micro-environment experienced by tablets during the pan coating unit operation significantly impacts the strength of the bilayer interface of tablets on storage.

Cathodic delamination of seawater-immersed anticorrosive coatings: Mapping of parameters affecting the rate

DEFF Research Database (Denmark)

Sørensen, Per Aggerholm; Dam-Johansen, Kim; Weinell, C. E.

2010-01-01

Abstract: Cathodic delamination is one of the major modes of failure for organic coatings immersed in seawater and refers to the weakening or loss of adhesion between the coating and the substrate. The diminished adhesion is the result of electrochemical reactions occurring at the coating...

Surface modified MXene Ti{sub 3}C{sub 2} multilayers by aryl diazonium salts leading to large-scale delamination

Energy Technology Data Exchange (ETDEWEB)

Wang, Hongbing [College of Mechanics and Materials, Hohai University, Nanjing, Jiangsu Province 210098 (China); Department of Mathematics and Physics, Nanjing Institute of Technology, Nanjing, Jiangsu Province 211167 (China); Zhang, Jianfeng, E-mail: jfzhang_sic@163.com [College of Mechanics and Materials, Hohai University, Nanjing, Jiangsu Province 210098 (China); Wu, Yuping; Huang, Huajie; Li, Gaiye; Zhang, Xin; Wang, Zhuyin [College of Mechanics and Materials, Hohai University, Nanjing, Jiangsu Province 210098 (China)

2016-10-30

Highlights: • A novel and simple method to delaminate MXene Ti{sub 3}C{sub 2} multilayers. • Surface modification using aryl diazonium salts induced swelling that conversely weakened the bonds between MXene layers. • The grafting of phenylsulfonic acid groups on MXene surfaces resulted in excellent water dispersibility. - Abstract: Herein we report a simple and facile method to delaminate MXene Ti{sub 3}C{sub 2} multilayers by the assistance of surface modification using aryl diazonium salts. The basic strategy involved the preparation of layered MAX Ti{sub 3}AlC{sub 2} and the exfoliation of Ti{sub 3}AlC{sub 2} into Ti{sub 3}C{sub 2} multilayers, followed by Na{sup +} intercalation and surface modification using sulfanilic acid diazonium salts. The resulting chemically grafted Ti{sub 3}C{sub 2} flakes were characterized by Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) to confirm the presence of the surface organic species. Ultraviolet-visible spectroscopy revealed that surface-modified MXene Ti{sub 3}C{sub 2} sheets disperse well in water and the solutions obey Lambert–Beer’s law. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to demonstrate the morphology and structure of delaminating MXene Ti{sub 3}C{sub 2} flakes. The results indicated that chemical modification for MXene multilayers by aryl diazonium salts induced swelling that conversely weakened the bonds between MX layers, hence leading to large-scale delamination of multilayered MXene Ti{sub 3}C{sub 2}via mild sonication. Advantages of the present approach rely not only on the simplicity and efficiency of the delamination procedure but also on the grafting of aryl groups to MXene surfaces, highly suitable for further applications of the newly discovered two-dimensional materials.

Criteria for initiation of delamination in quasi-static punch-shear tests of a carbon-fiber composite material.

Energy Technology Data Exchange (ETDEWEB)

Chin, Eric Brian [Sandia National Lab. (SNL-CA), Livermore, CA (United States); English, Shawn Allen [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Briggs, Timothy [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2015-09-01

V arious phenomenological delamination initiation criteria are analyzed in quasi - static punch - shear tests conducted on six different geometries. These six geometries are modeled and analyzed using elastic, large - deformation finite element analysis. Analysis output is post - processed to assess different delamination initiation criteria, and their applicability to each of the geometries. These criteria are compared to test results to assess whether or not they are appropriate based on what occurred in testing. Further, examinations of CT scans and ultrasonic images o f test specimens are conducted in the appendix to determine the sequence of failure in each test geometry.

Morphea in Adults and Children Cohort VI: A cross-sectional comparison of outcomes between adults with pediatric-onset and adult-onset morphea

Science.gov (United States)

Condie, Daniel; Grabell, Daniel; Jacobe, Heidi

2014-01-01

Objective Few studies have looked at outcomes of adults with pediatric-onset morphea. The objective of the present study was to compare clinical outcomes and health-related quality of life in adults with pediatric-onset morphea to those of patients with adult-onset morphea. Methods Participants in the study were drawn from the Morphea in Adults and Children Cohort and included 68 adults with pediatric-onset morphea and 234 patients with adult-onset morphea. Outcome measures included the Localized Scleroderma Cutaneous Assessment Tool (LoSCAT), physical exam findings, and quality of life questionnaires. Results Adults with pediatric-onset morphea were younger, had longer disease duration, and were more likely to have the linear subtype of morphea. Patients with pediatric-onset disease were less likely to have active disease. Among patients with active disease, those with pediatric-onset morphea had less disease activity as measured by the LoSCAT. Patients with pediatric-onset disease had higher disease damage as measured by the Physician Global Assessment of Damage, but similar disease damage as measured by the Localized Scleroderma Skin Damage Index. Patients with pediatric-onset disease had more favorable quality of life scores for all measures that reached statistical significance. Conclusion Adults with pediatric-onset morphea differ from patients with adult-onset disease with respect to subtype, disease activity, disease damage, and health-related quality of life. PMID:25156342

EVALUATION OF STRENGTH TO SHEAR AND DELAMINATION IN GLUED LAMINATED WOOD

Directory of Open Access Journals (Sweden)

Carlito Calil Neto

2014-12-01

Full Text Available The Glued Laminated Wood has a large range of applications. In Brazil, its employment as cross-piece poles for overhead electrical power has attracted the attention of companies in the industry, motivated by the potential use of this material. Among the factors that influence the mechanical performance of Glulam solutions stand out efficiency and affinity of the adhesives to the species of wood used, the type of treatment and moisture content of wood veneer, motivating the development of new research on this topic. This research aimed to investigate, by Design of Experiments (DOE, the influence of wood (pinus, teca, eucalipto, adhesive (Purbond; Cascophen and treatment (CCA, CCB, CCBS in the variable responses shear strength and delamination, consisting in the same combination factors evaluated in ANEEL/EESC-PD220-07 project: Head Crosshead Glulam Series. The results of the statistical analysis showed that the species factor expressed significant effect for both response variables evaluated, did not occur with adhesive and treatment factors. Moisture content was significant in the wood evaluated when analyzed the shear strength, and the teca wood showed the highest shear strength and also relating to the delamination.

Ductile film delamination from compliant substrates using hard overlayers.

Science.gov (United States)

Cordill, M J; Marx, V M; Kirchlechner, C

2014-11-28

Flexible electronic devices call for copper and gold metal films to adhere well to polymer substrates. Measuring the interfacial adhesion of these material systems is often challenging, requiring the formulation of different techniques and models. Presented here is a strategy to induce well defined areas of delamination to measure the adhesion of copper films on polyimide substrates. The technique utilizes a stressed overlayer and tensile straining to cause buckle formation. The described method allows one to examine the effects of thin adhesion layers used to improve the adhesion of flexible systems.

Influence of crystallographic texture in X70 pipeline steels on toughness anisotropy and delamination

Science.gov (United States)

Al-Jabr, Haytham M.

The effects of microstructure and crystallographic texture in four commercially-produced API X70 pipeline steels and their relation to planar anisotropy of toughness and delamination were evaluated. The experimental steels were processed through either a hot strip mill, a Steckel mill, or a compact strip mill. Different processing routes were selected to obtain plates with potential variations in the microstructure and anisotropic characteristics. Tensile and Charpy impact testing were used to evaluate the mechanical properties in three orientations: longitudinal (L), transverse (T) and diagonal (D) with respect to the rolling direction to evaluate mechanical property anisotropy. The yield and tensile strengths were higher in the T orientation and toughness was lower in the D orientation for all plates. Delamination was observed in some of the ductile fracture surfaces of the impact samples. To further study the splitting behavior and effects on impact toughness, a modified impact test (MCVN) specimen with side grooves was designed to intensify induced stresses parallel to the notch root and thus facilitate evaluation of delamination. Scanning electron microscopy combined with electron backscattered diffraction (EBSD) were used to evaluate the grain size, microstructural constituents, and crystallographic texture to determine the factors leading to delamination and the anisotropy in toughness. The ferrite grain size is mainly responsible for the differences in DBTTs between the L and T orientations. The higher DBTT in the D orientation observed in pipeline steels is attributed to crystallographic texture. The higher DBTT in the D direction is due to the higher volume fraction of grains having their {100} planes parallel or close to the primary fracture plane for the D orientation. An equation based on a new "brittleness parameter," based on an assessment of grain orientations based on EBSD data, was developed to predict the changes in DBTTs with respect to sample

Cohesive delamination and frictional contact on joining surface via XFEM

Directory of Open Access Journals (Sweden)

Francesco Parrinello

2018-02-01

Full Text Available In the present paper, the complex mechanical behaviour of the surfaces joining two differentbodies is analysed by a cohesive-frictional interface constitutive model. The kinematical behaviouris characterized by the presence of discontinuous displacement fields, that take place at the internalconnecting surfaces, both in the fully cohesive phase and in the delamination one. Generally, in order tocatch discontinuous displacement fields, internal connecting surfaces (adhesive layers are modelled bymeans of interface elements, which connect, node by node, the meshes of the joined bodies, requiringthe mesh to be conforming to the geometry of the single bodies and to the relevant connecting surface.In the present paper, the Extended Finite Element Method (XFEM is employed to model, both fromthe geometrical and from the kinematical point of view, the whole domain, including the connectedbodies and the joining surface. The joining surface is not discretized by specific finite elements, butit is defined as an internal discontinuity surface, whose spatial position inside the mesh is analyticallydefined. The proposed approach is developed for two-dimensional composite domains, formed by twoor more material portions joined together by means of a zero thickness adhesive layer. The numericalresults obtained with the proposed approach are compared with the results of the classical interfacefinite element approach. Some examples of delamination and frictional contact are proposed withlinear, circular and curvilinear adhesive layer.

Automated detection of delamination and disbond from wavefield images obtained using a scanning laser vibrometer

International Nuclear Information System (INIS)

Sohn, H; Yang, J Y; Dutta, D; DeSimio, M; Olson, S; Swenson, E

2011-01-01

The paper presents signal and image processing algorithms to automatically detect delamination and disbond in composite plates from wavefield images obtained using a scanning laser Doppler vibrometer (LDV). Lamb waves are excited by a lead zirconate titanate transducer (PZT) mounted on the surface of a composite plate, and the out-of-plane velocity field is measured using an LDV. From the scanned time signals, wavefield images are constructed and processed to study the interaction of Lamb waves with hidden delaminations and disbonds. In particular, the frequency–wavenumber (f–k) domain filter and the Laplacian image filter are used to enhance the visibility of defects in the scanned images. Thereafter, a statistical cluster detection algorithm is used to identify the defect location and distinguish damaged specimens from undamaged ones

Numerical model of glulam beam delamination in dependence on cohesive strength

Science.gov (United States)

Kawecki, Bartosz; Podgórski, Jerzy

2018-01-01

This paper presents an attempt of using a finite element method for predicting delamination of a glue laminated timber beam through a cohesive layer. There were used cohesive finite elements, quadratic stress damage initiation criterion and mixed mode energy release rate failure model. Finite element damage was equal to its complete stiffness degradation. Timber material was considered to be an orthotropic with plastic behaviour after reaching bending limit.

Ag-Coated Heterostructures of ZnO-TiO2/Delaminated Montmorillonite as Solar Photocatalysts

Directory of Open Access Journals (Sweden)

Carolina Belver

2017-08-01

Full Text Available Heterostructures based on ZnO-TiO2/delaminated montmorillonite coated with Ag have been prepared by sol–gel and photoreduction procedures, varying the Ag and ZnO contents. They have been thoroughly characterized by XRD, WDXRF, UV–Vis, and XPS spectroscopies, and N2 adsorption, SEM, and TEM. In all cases, the montmorillonite was effectively delaminated with the formation of TiO2 anatase particles anchored on the clay layer’s surface, yielding porous materials with high surface areas. The structural and textural properties of the heterostructures synthesized were unaffected by the ZnO incorporated. The photoreduction led to solids with Ag nanoparticles decorating the surface. These materials were tested as photocatalysts for the degradation of several emerging contaminants with different nitrogen-bearing chemical structures under solar light. The catalysts yielded high rates of disappearance of the starting pollutants and showed quite stable performance upon successive applications.

Experimental Characterization and Cohesive Laws for Delamination of Off-Axis GFRP Laminates

DEFF Research Database (Denmark)

Lindgaard, Esben; Bak, Brian Lau Verndal

2015-01-01

This work experimentally characterizes mixed mode delamination in glass fibre reinforced polymer laminates taking into account the influence of the off-axis angle between the lamina orientation and the crack growth direction on the fracture properties. Thus, providing a cohesive law that enables...... analysis of 3D models in which mixed mode crack growth within laminates having anisotropic fracture properties takes place....

An high order Mixed Interpolation Tensorial Components (MITC) shell element approach for modeling the buckling behavior of delaminated composites

DEFF Research Database (Denmark)

Gaiotti, Marco; Rizzo, Cesare M.; Branner, Kim

2014-01-01

This paper describes the experimental and numerical studies carried out on delaminated fiberglass epoxy resin laminates made-up by different fabrication methods, namely by vacuum infusion and prepreg. While the tested specimens were originally intended for the assessment of buckling behavior...... of composite laminates of wind turbine blades, results were found valuable for the marine industry as well, because similar laminates are used for the hull shell and stiffeners. Systematic calculations were carried out to assess the effects of an embedded delamination on the buckling load, varying the size...

Age at onset and Parkinson disease phenotype

Science.gov (United States)

Pagano, Gennaro; Ferrara, Nicola; Brooks, David J.

2016-01-01

Objective: To explore clinical phenotype and characteristics of Parkinson disease (PD) at different ages at onset in recently diagnosed patients with untreated PD. Methods: We have analyzed baseline data from the Parkinson's Progression Markers Initiative database. Four hundred twenty-two patients with a diagnosis of PD confirmed by DaTSCAN imaging were divided into 4 groups according to age at onset (onset younger than 50 years, 50–59 years, 60–69 years, and 70 years or older) and investigated for differences in side, type and localization of symptoms, occurrence/severity of motor and nonmotor features, nigrostriatal function, and CSF biomarkers. Results: Older age at onset was associated with a more severe motor and nonmotor phenotype, a greater dopaminergic dysfunction on DaTSCAN, and reduction of CSF α-synuclein and total tau. The most common presentation was the combination of 2 or 3 motor symptoms (bradykinesia, resting tremor, and rigidity) with rigidity being more common in the young-onset group. In about 80% of the patients with localized onset, the arm was the most affected part of the body, with no difference across subgroups. Conclusions: Although the presentation of PD symptoms is similar across age subgroups, the severity of motor and nonmotor features, the impairment of striatal binding, and the levels of CSF biomarkers increase with age at onset. The variability of imaging and nonimaging biomarkers in patients with PD at different ages could hamper the results of future clinical trials. PMID:26865518

Alps, Carpathians and Dinarides-Hellenides: about plates, micro-plates and delaminated crustal blocks

Science.gov (United States)

Schmid, Stefan

2014-05-01

Before the onset of Europe-Africa continental collision in the Dinarides-Hellenides (around 60Ma) and in the Alps and Western Carpathians (around 35 Ma), and at a large scale, the dynamics of orogenic processes in the Mediterranean Alpine chains were governed by Europe-Africa plate convergence leading to the disappearance of large parts of intervening oceanic lithosphere, i.e. the northern branch of Neotethys along the Sava-Izmir-Ankara suture and Alpine Tethys along the Valais-Magura suture (Schmid et al. 2008). In spite of this, two major problems concerning the pre-collisional stage are still poorly understood: (1) by now we only start to understand geometry, kinematics and dynamics of the along-strike changes in the polarity of subduction between Alps-Carpathians and Dinarides-Hellenides, and (2) it is not clear yet during exactly which episodes and to what extent intervening rifted continental fragments such as, for example, Iberia-Briançonnais, Tisza, Dacia, Adria-Taurides moved independently as micro-plates, and during which episodes they remained firmly attached to Europa or Africa from which they broke away. As Europe-Africa plate convergence slowed down well below 1 cm/yr at around 30 Ma ago these pre-collisional processes driven by plate convergence on a global scale gave way to more local processes of combined roll-back and crustal delamination in the Pannonian basin of the Carpathian embayment and in the Aegean (as well as in the Western Mediterranean, not discussed in this contribution). In the case of the Carpathian embayment E-directed roll back totally unrelated to Europe-Africa N-S-directed convergence, started at around 20 Ma ago, due to the presence relict oceanic lithosphere in the future Pannonian basin that remained un-subducted during collision. Due to total delamination of the crust from the eastward rolling back European mantle lithosphere the anticlockwise rotating ALCAPA crustal block, consisting of Eastern Alps and Western Carpathian

Ballistic protection performance of curved armor systems with or without debondings/delaminations

International Nuclear Information System (INIS)

Tan, Ping

2014-01-01

Highlights: • Influence of pre-existing defect in an armor system on its ballistic performance. • Development of finite element models for the ballistic performance of armor systems. • Prediction of the ballistic limit and back face deformation of curved armor systems. - Abstract: In order to discern how pre-existing defects such as single or multiple debondings/delaminations in a curved armor system may affect its ballistic protection performance, two-dimensional axial finite element models were generated using the commercial software ANSYS/Autodyn. The armor systems considered in this investigation are composed of boron carbide front component and Kevlar/epoxy backing component. They are assumed to be perfectly bonded at the interface without defects. The parametric study shows that for the cases considered, the maximum back face deformation of a curved armor system with or without defects is more sensitive to its curvature, material properties of the ceramic front component, and pre-existing defect size and location than the ballistic limit velocity. Additionally, both the ballistic limit velocity and maximum back face deformation are significantly affected by the backing component thickness, front/backing component thickness ratio and the number of delaminations

Measurement of adherence of residually stressed thin films by indentation. I. Mechanics of interface delamination

International Nuclear Information System (INIS)

Marshall, D.B.; Evans, A.G.

1984-01-01

A fracture analysis of indentation-induced delamination of thin films is presented. The analysis is based on a model system in which the section of film above the delaminating crack is treated as a rigidly clamped disc, and the crack extension force is derived from changes in strain energy of the system as the crack extends. Residual deposition stresses influence the cracking response by inducing buckling of the film above the crack and by providing an additional crack driving force once buckling occurs. A relation for the equilibrium crack length is derived in terms of the indenter load and geometry, the film thickness and mechanical properties, the residual stress level and the fracture toughness of the interface. The analysis provides a basis for using controlled indentation cracking as a quantitative measure of interface toughness and for evaluating contact-induced damage in thin films

Continental Delamination of the Romanian Eastern Carpathians: A Lower Crustal Origin of the Vrancea Seismogenic Zone?

Science.gov (United States)

Fillerup, M. A.; Knapp, J. H.; Knapp, C. C.

2006-12-01

Two lithosphere-scale, explosive-source seismic reflection profiles (DRACULA I and DACIA PLAN), inclusive of the hinterland and foreland of the Romanian Eastern Carpathians, provide new evidence for the geodynamic origin of the Vrancea Seismogenic Zone (VSZ) of Romania. These data, collected to evaluate existing subduction-related and delamination geodynamic models proposed to explain the intermediate depth seismicity associated with the Vrancea zone, show evidence of continental crust extending continuously above the VSZ from the Carpathian foreland well into the Transylvanian hinterland. Crustal thicknesses inferred from these data based on reflectivity show a 40-45 km crust below the Transylvanian basin abruptly shallowing to 32 km for ~120 km beneath the fold and thrust belt of the main Carpathian orogen and thickening again to 38-42 km crust in the foreland. This thinned crust outlines an apparent lower crustal sub-orogenic cavity that is overlain by a relatively subhorizontal reflective fabric absent of dipping reflectivity. The northwest dipping Vrancea seismogenic body, a 30x70x200 km volume of intermediate depth earthquakes, is located on the eastern flank of the apparently thin crust beneath the Carpathian orogen. Amplitude decay curves show penetration of seismic energy to a depth of ~60 km in the vicinity of the sub-orogenic cavity, implying this non- reflective zone is a geologic signature. Rotation of the VSZ about a hinge beneath the foreland basin at a depth of ~50 km restores to fill the lower-crustal cavity under the orogen, suggesting the VSZ represents a portion of brittle lower crust delaminated during continental lithospheric delamination which may have caused regional uplift of the Transylvanian basin. The lack of through-going, dipping crustal-scale boundaries along this composite lithospheric transect would appear to preclude subduction as an explanation for seismicity in the VSZ, consistent with abundant surface geologic data. These

Non-Destructive Evaluation of Kissing Bonds using Local Defect Resonance (LDR) Spectroscopy: A Simulation Study

Science.gov (United States)

Delrue, S.; Tabatabaeipour, M.; Hettler, J.; Van Den Abeele, K.

With the growing demand from industry to optimize and further develop existing Non-Destructive Testing & Evaluation (NDT&E) techniques or new methods to detect and characterize incipient damage with high sensitivity and increased quality, ample efforts have been devoted to better understand the typical behavior of kissing bonds, such as delaminations and cracks. Recently, it has been shown experimentally that the nonlinear ultrasonic response of kissing bonds could be enhanced by using Local Defect Resonance (LDR) spectroscopy. LDR spectroscopy is an efficient NDT technique that takes advantage of the characteristic fre- quencies of the defect (defect resonances) in order to provide maximum acoustic wave-defect interaction. In fact, for nonlinear methodologies, the ultrasonic excitation of the sample should occur at either multiples or integer ratios of the characteristic defect resonance frequencies, in order to obtain the highest signal-to-noise response in the nonlinear LDR spectroscopy. In this paper, the potential of using LDR spectroscopy for the detection, localization and characterization of kissing bonds is illustrated using a 3D simulation code for elastic wave propagation in materials containing closed but dynamically active cracks or delaminations. Using the model, we are able to define an appropriate method, based on the Scaling Subtraction Method (SSM), to determine the local defect resonance frequencies of a delamination in a composite plate and to illustrate an increase in defect nonlinearity due to LDR. The simulation results will help us to obtain a better understanding of the concept of LDR and to assist in the further design and testing of LDR spectroscopy for the detection, localization and characterization of kissing bonds.

COMPOSITIONAL AND THERMAL DIFFERENCES BETWEEN LITHOSPHERIC AND ASTHENOSPHERIC MANTLE AND THEIR INFLUENCE ON CONTINENTAL DELAMINATION

Directory of Open Access Journals (Sweden)

A. I. Kiselev

2015-01-01

Full Text Available The lower part of lithosphere in collisional orogens may delaminate due to density inversion between the asthenosphere and the cold thickened lithospheric mantle. Generally, standard delamination models have neglected density changes within the crust and the lithospheric mantle, which occur due to phase transitions and compositional variations upon changes of P-T parameters. Our attention is focused on effects of phase and density changes that may be very important and even dominant when compared with the effect of a simple change of the thermal mantle structure. The paper presents the results of numerical modeling for eclogitization of basalts of the lower crust as well as phase composition changes and density of underlying peridotite resulted from tectonic thickening of the lithosphere and its foundering into the asthenosphere. As the thickness of the lower crust increases, the mafic granulite (basalt passes into eclogite, and density inversion occurs at the accepted crust-mantle boundary (P=20 kbar because the newly formed eclogite is heavier than the underlying peridotite by 6 % (abyssal peridotite, according to [Boyd, 1989]. The density difference is a potential energy for delamination of the eclogitic portion of the crust. According to the model, P=70 kbar and T=1300 °C correspond to conditions at the lower boundary of the lithosphere. Assuming the temperature adiabatic distribution within the asthenosphere, its value at the given parameters ranges from 1350 °C to 1400 °C. Density inversion at dry conditions occurs with the identical lithospheric and asthenospheric compositions at the expense of the temperature difference at 100 °C with the density difference of only 0.0022 %. Differences of two other asthenospheric compositions (primitive mantle, and lherzolite KH as compared to the lithosphere (abyssal peridotite are not compensated for by a higher temperature. The asthenospheric density is higher than that of the lithospheric base

Incorporation of plasma-functionalized carbon nanostructures in composite laminates for interlaminar reinforcement and delamination crack monitoring

Science.gov (United States)

Kravchenko, O. G.; Pedrazzoli, D.; Kovtun, D.; Qian, X.; Manas-Zloczower, I.

2018-01-01

A new approach employing carbon nanostructure (CNS) buckypapers (BP) was used to prepare glass fiber/epoxy composite materials with enhanced resistance to delamination along with damage monitoring capability. The CNS-BP was subjected to plasma treatment to improve its wettability by epoxy and to promote stronger interfacial bonding. An increase up to 20% in interlaminar fracture toughness in mode I and mode II was observed in composite laminates incorporating CNS BP. Morphological analysis of the fracture surfaces indicated that failure in the conductive CNS layer provided a more effective energy dissipation mechanism, resulting in interlaminar fracture toughness increase. Moreover, fracture of the conductive CNS layer enabled damage monitoring of the composite by electrical resistance measurements upon delamination. The proposed approach provides multifunctional ply interphases, allowing to couple damage monitoring with interlaminar reinforcement of composite laminates.

Testing a flexible method to reduce false monsoon onsets.

Directory of Open Access Journals (Sweden)

Mathew Alexander Stiller-Reeve

Full Text Available To generate information about the monsoon onset and withdrawal we have to choose a monsoon definition and apply it to data. One problem that arises is that false monsoon onsets can hamper our analysis, which is often alleviated by smoothing the data in time or space. Another problem is that local communities or stakeholder groups may define the monsoon differently. We therefore aim to develop a technique that reduces false onsets for high-resolution gridded data, while also being flexible for different requirements that can be tailored to particular end-users. In this study, we explain how we developed our technique and demonstrate how it successfully reduces false onsets and withdrawals. The presented results yield improved information about the monsoon length and its interannual variability. Due to this improvement, we are able to extract information from higher resolution data sets. This implies that we can potentially get a more detailed picture of local climate variations that can be used in more local climate application projects such as community-based adaptations.

Delaminated Transfer of CVD Graphene

Science.gov (United States)

Clavijo, Alexis; Mao, Jinhai; Tilak, Nikhil; Altvater, Michael; Andrei, Eva

Single layer graphene is commonly synthesized by dissociation of a carbonaceous gas at high temperatures in the presence of a metallic catalyst in a process known as Chemical Vapor Deposition or CVD. Although it is possible to achieve high quality graphene by CVD, the standard transfer technique of etching away the metallic catalyst is wasteful and jeopardizes the quality of the graphene film by contamination from etchants. Thus, development of a clean transfer technique and preservation of the parent substrate remain prominent hurdles to overcome. In this study, we employ a copper pretreatment technique and optimized parameters for growth of high quality single layer graphene at atmospheric pressure. We address the transfer challenge by utilizing the adhesive properties between a polymer film and graphene to achieve etchant-free transfer of graphene films from a copper substrate. Based on this concept we developed a technique for dry delamination and transferring of graphene to hexagonal boron nitride substrates, which produced high quality graphene films while at the same time preserving the integrity of the copper catalyst for reuse. DOE-FG02-99ER45742, Ronald E. McNair Postbaccalaureate Achievement Program.

Moisture-Induced Delamination Video of an Oxidized Thermal Barrier Coating

Science.gov (United States)

Smialek, James L.; Zhu, Dongming; Cuy, Michael D.

2008-01-01

PVD TBC coatings were thermally cycled to near-failure at 1150 C. Normal failure occurred after 200 to 300 1-hr cycles with only moderate weight gains (0.5 mg/sq cm). Delamination and buckling was often delayed until well after cooldown (desktop spallation), but could be instantly induced by the application of water drops, as shown in a video clip which can be viewed by clicking on figure 2 of this report. Moisture therefore plays a primary role in delayed desktop TBC failure. Hydrogen embrittlement is proposed as the underlying mechanism.

Surface modification of carbon/epoxy prepreg using oxygen plasma and its effect on the delamination resistance behavior of carbon/epoxy composites

International Nuclear Information System (INIS)

Kim, M.H.; Rhee, K.Y.; Kim, H.J.; Jung, D.H.

2007-01-01

It was shown in previous study that the fracture toughness of carbon/epoxy laminated composites could be significantly improved by modifying the surface of the prepreg using Ar + irradiation in an oxygen environment. In this study, the surface of carbon/epoxy prepreg was modified using an oxygen plasma to improve the delamination resistance behavior of carbon/epoxy laminated composites. The variation of the contact angle on the prepreg surface was determined as a function of the modification time, in order to determine the optimal modification time. An XPS analysis was conducted to investigate the chemical changes on the surface of the prepreg caused by the plasma modification. Mode I delamination resistance curves of the composites with and without surface modification were plotted as a function of the delamination increment. The results showed that the contact angle varied from ∼64 o to ∼47 o depending on the modification time and reached a minimum for a modification time of 30 min. The XPS analysis showed that the hydrophilic carbonyl C=O group was formed by the oxygen plasma modification. The results also showed that the delamination resistance behavior was significantly improved by the plasma modification of the prepreg. This improvement was caused by the better layer-to-layer adhesion as well as increased interfacial strength between the fibers and matrix

Modeling delamination of FRP laminates under low velocity impact

Science.gov (United States)

Jiang, Z.; Wen, H. M.; Ren, S. L.

2017-09-01

Fiber reinforced plastic laminates (FRP) have been increasingly used in various engineering such as aeronautics, astronautics, transportation, naval architecture and their impact response and failure are a major concern in academic community. A new numerical model is suggested for fiber reinforced plastic composites. The model considers that FRP laminates has been constituted by unidirectional laminated plates with adhesive layers. A modified adhesive layer damage model that considering strain rate effects is incorporated into the ABAQUS / EXPLICIT finite element program by the user-defined material subroutine VUMAT. It transpires that the present model predicted delamination is in good agreement with the experimental results for low velocity impact.

A comparative study on free vibration analysis of delaminated torsion stiff and bending stiff composite shells

International Nuclear Information System (INIS)

Dey, Sudip; Karmakar, Amit

2013-01-01

This paper presents a finite element method to compare the effects of delamination on free vibration of graphite-epoxy bending stiff and torsion stiff composite pretwisted shallow conical shells. The generalized dynamic equilibrium equation is derived from Lagrange's equation of motion neglecting the Coriolis effect for moderate rotational speeds. An eight noded isoparametric plate bending element is employed incorporating rotary inertia and effects of transverse shear deformation based on Mindlin's theory. The multipoint constraint; algorithm is utilized to ensure the compatibility of deformation and equilibrium of resultant forces and moments at the delamination crack front. The standard eigen value problem is solved by applying the QR iteration algorithm. Mode shapes for typical configurations are also depicted. Numerical results obtained are the first known non-dimensional frequencies which could serve as reference solutions for the future investigators.

Enhancement of Impact Toughness by Delamination Fracture in a Low-Alloy High-Strength Steel with Al Alloying

Science.gov (United States)

Sun, Junjie; Jiang, Tao; Liu, Hongji; Guo, Shengwu; Liu, Yongning

2016-12-01

The effect of delamination toughening of martensitic steel was investigated both at room and low temperatures [253 K and 233 K (-20 °C and -40 °C)]. Two low-alloy martensitic steels with and without Al alloying were both prepared. Layered structure with white band and black matrix was observed in Al alloyed steel, while a homogeneous microstructure was displayed in the steel without Al. Both steels achieved high strength (tensile strength over 1600 MPa) and good ductility (elongation over 11 pct), but they displayed stark contrasts on impact fracture mode and Charpy impact energy. Delamination fracture occurred in Al alloyed steel and the impact energies were significantly increased both at room temperature (from 75 to 138 J, i.e., nearly improved up to 2 times) and low temperatures [from 47.9 to 71.3 J at 233 K (-40 °C)] compared with the one without Al. Alloying with Al promotes the segregation of Cr, Mn, Si and C elements to form a network structure, which is martensite with higher carbon content and higher hardness than that of the matrix. And this network structure evolved into a band structure during the hot rolling process. The difference of yield stress between the band structure and the matrix gives rise to a delamination fracture during the impact test, which increases the toughness greatly.

Comparison of outcomes in adults with pediatric-onset morphea and those with adult-onset morphea: a cross-sectional study from the morphea in adults and children cohort.

Science.gov (United States)

Condie, Daniel; Grabell, Daniel; Jacobe, Heidi

2014-12-01

Few studies have examined outcomes in adults with pediatric-onset morphea. The objective of the present study was to compare clinical outcomes and health-related quality of life (HRQOL) in adults with onset of morphea in childhood to those in patients with adult onset of morphea. Participants in the study were drawn from the Morphea in Adults and Children cohort and included 68 adults with pediatric-onset morphea and 234 patients with adult-onset morphea. Outcome measures included the Localized Scleroderma Cutaneous Assessment Tool (LoSCAT), physical examination findings, and HRQOL questionnaires. Adults with pediatric-onset morphea were younger, had longer disease duration, and were more likely to have the linear subtype of morphea. Patients with pediatric-onset disease were less likely to have active disease. Among patients with active disease, those with pediatric-onset morphea had less disease activity as measured by the LoSCAT. Patients with pediatric-onset disease had higher severity of disease damage when measured by the physician's global assessment of damage, but had similar levels of disease damage when measured by the Localized Scleroderma Skin Damage Index. Patients with pediatric-onset disease had more favorable HRQOL scores for all measures, all of which were statistically significantly different from those in patients with adult-onset morphea. Adults with pediatric-onset morphea differ from patients with adult-onset disease with respect to disease subtype, severity of disease activity and damage, and levels of HRQOL. Copyright © 2014 by the American College of Rheumatology.

Delamination wear mechanism in gray cast irons

International Nuclear Information System (INIS)

Salehi, M.

2000-01-01

An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a process of plastic deformation at the subsurface, crack nucleation, and crack growth leading to formation of plate like debris and therefore the delamination theory applies. No evidence of adhesion was observed. This could be due to formation of oxides on the wear surface which prevent adhesion. channel type chromium plating ''picked'' up cast iron from the counter-body surfaces by mechanically trapping cast iron debris on and within the cracks. The removal of the plated chromium left a pitted surface on the cast iron

Analysis and modeling of delamination factor in drilling of woven kenaf fiber reinforced epoxy using Box Behnken experimental design

Science.gov (United States)

Suhaily, M.; Che Hassan, C. H.; Jaharah, A. G.; Afifah, M. A.; Nor Khairusshima, M. K.

2018-01-01

In this research study, it presents a comprehensive mathematical model for correlating the influences of drilling parameters on the delamination factor during the drilling of woven kenaf fiber reinforced epoxy composite laminates using the Box Behnken experimental design. The purpose of this study is to investigate the influence of drilling parameters such as cutting speed, feed rate and drill sizes on the delamination produced when drilling woven kenaf reinforced epoxy composite using the non-coated HSS drill bits. The damage generated on the woven kenaf reinforced epoxy composite laminates were observed both at the entrance and exit surface during the drilling operation. The experiments were conducted according to the Box Behnken experimental designs.

Restraining Na-Montmorillonite Delamination in Water by Adsorption of Sodium Dodecyl Sulfate or Octadecyl Trimethyl Ammonium Chloride on the Edges

Directory of Open Access Journals (Sweden)

Hongliang Li

2016-08-01

Full Text Available The delamination of montmorillonite in water leads to sliming in ore slurry, which is detrimental to mineral flotation and solid/water separation. In this work, the delamination of Na-montmorillonite (Na-MMT has been restrained by sodium dodecyl sulfate (SDS or octadecyl trimethyl ammonium chloride (1831 through the adsorption on the edge of the mineral. The experimental results have shown that the pretreatment by adding SDS and 1831 could greatly reduce the Stokes size percentage of −1.1 µm particles in the aqueous Na-MMT suspension. From the X-ray diffractometer (XRD results, the interlayer spacing of the MMT pre-treated by SDS and 1831 is smaller than that of original MMT particles. Adsorption position of SDS and 1831 on MMT surfaces was analyzed by the measurements of adsorption capacity of SDS and 1831, inductively-coupled plasma spectra, and zeta potential before and after the plane surface of MMT was covered with tetraethylenepentaminecopper ([Cu(tetren]2+. The results indicated that SDS and 1831 are adsorbed on the edge and the whole surface of Na-MMT, respectively. Delamination of MMT could be well restrained by the adsorption of SDS and 1831 on the edges of MMT.

The influence of a delaminated layer on the impedance spectrum of an operating solid oxide fuel cell

Energy Technology Data Exchange (ETDEWEB)

Gazzarri, J.I. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Mechanical Engineering; Kesler, O. [National Research Council of Canada, Vancouver, BC (Canada). Inst. for Fuel Cell Innovation

2005-07-01

The development of a 2-dimensional finite element model of Solid Oxide Fuel Oxide (SOFC) AC impedance behavior was discussed. The model was developed to simulate the frequency response of a single cell with and without mechanical damage. Impedance spectroscopy was used in the development of a diagnostic technique to identify a delamination failure within a working SOFC. Changes in the impedance spectrum of a working cell were observed on the appearance of a delamination between 2 adjacent layers. The intent was to identify distinctive patterns in the cracked cell spectra that provide enough information about the degradation process so that it can be recognized and distinguished from other electrochemical processes and degradation modes. It was anticipated that the method will provide a useful tool for both maintenance and research purposes, providing insight into the causes of inadequate functioning. Results indicate that the presence of mechanically induced damage within the components of an SOFC can be detected by comparing the frequency response of the undamaged cell with that of a cell in which in-plane cracking or delamination has occurred. The presence of such defects manifests itself as a new semicircle in the Nyquist impedance diagram of the full cell, with a relaxation frequency of approximately 35 kHz. It was concluded that the ability to distinguish the crack-induced semicircle from the semicircles induced by electrochemical reactions depended on the difference between the characteristic relaxation times and their relative sizes. 17 refs., 1 tab.,10 figs.

Confinement - assisted shock-wave-induced thin-film delamination (SWIFD) of copper indium gallium diselenide (CIGS) on a flexible substrate

Science.gov (United States)

Lorenz, Pierre; Zagoranskiy, Igor; Ehrhardt, Martin; Han, Bing; Bayer, Lukas; Zimmer, Klaus

2017-12-01

The laser structuring of CIGS (copper indium gallium (di)selenide) solar cell material without influence and damaging the functionality of the active layer is a challenge for laser methods The shock-wave-induced thin-film delamination (SWIFD) process allows structuring without thermal modifications due to a spatial separation of the laser absorption from the functional layer removal process. In the present study, SWIFD structuring of CIGS solar cell stacks was investigated. The rear side of the polyimide was irradiated with a KrF-Excimer laser. The laser-induced ablation process generates a traverse shock wave, and the interaction of the shock wave with the layer-substrate interface results in a delamination process. The effect of a water confinement on the SWIFD process was studied where the rear side of the substrate was covered with a ∼2 mm thick water layer. The resultant surface morphology was analysed and discussed. At a sufficient number of laser pulses N and laser fluences Φ, the CIGS layer can be selectively removed from the Mo back contact. The water confinement, as well as the increasing laser beam size A0 and N, results in the reduction of the necessary minimal laser fluence Φth. Further, the delaminated CIGS area increased with increasing Φ, N, and A0.

Effects of tensile and compressive in-plane stress fields on adhesion in laser induced delamination experiments

NARCIS (Netherlands)

Fedorov, A.; Vellinga, W. P.; De Hosson, J. Th. M.

2008-01-01

In this work, the adhesion of a polymer coating on steel substrate subjected to uniaxial tensile plastic deformations was studied with the laser induced delamination technique. A decrease in the practical work of adhesion has been measured as the deformation of the substrate progressed. Moreover, it

In situ characterization of delamination and crack growth of a CGO–LSM multi-layer ceramic sample investigated by X-ray tomographic microscopy

DEFF Research Database (Denmark)

Bjørk, Rasmus; Esposito, Vincenzo; Lauridsen, Erik Mejdal

2014-01-01

The densification, delamination and crack growth behavior in a Ce0.9Gd0.1O1.95 (CGO) and (La0.85Sr0.15)0.9MnO3 (LSM) multi-layer ceramic sample was studied using in situ X-ray tomographic microscopy (microtomography) to investigate the critical dynamics of crack propagation and delamination...... in a multilayered sample. Naturally occurring defects, caused by the sample preparation process, are shown not to be critical in sample degradation. Instead defects are nucleated during the debinding step. Crack growth is significantly faster along the material layers than perpendicular to them, and crack growth...

Rapid-onset obesity with hypothalamic dysfunction, hypoventilation, and autonomic dysregulation (ROHHAD) syndrome may have a hypothalamus-periaqueductal gray localization.

Science.gov (United States)

Chow, Cristelle; Fortier, Marielle Valerie; Das, Lena; Menon, Anuradha P; Vasanwala, Rashida; Lam, Joyce C M; Ng, Zhi Min; Ling, Simon Robert; Chan, Derrick W S; Choong, Chew Thye; Liew, Wendy K M; Thomas, Terrence

2015-05-01

Anatomical localization of the rapid-onset obesity with hypothalamic dysfunction, hypoventilation, and autonomic dysregulation (ROHHAD) syndrome has proved elusive. Most patients had neuroimaging after cardiorespiratory collapse, revealing a range of ischemic lesions. A 15-year-old obese boy with an acute febrile encephalopathy had hypoventilation, autonomic dysfunction, visual hallucinations, hyperekplexia, and disordered body temperature, and saltwater regulation. These features describe the ROHHAD syndrome. Cerebrospinal fluid analysis showed pleocytosis, elevated neopterins, and oligoclonal bands, and serology for systemic and antineuronal antibodies was negative. He improved after receiving intravenous steroids, immunoglobulins, and long-term mycophenolate. Screening for neural crest tumors was negative. Magnetic resonance imaging of the brain early in his illness showed focal inflammation in the periaqueductal gray matter and hypothalamus. This unique localization explains almost all symptoms of this rare autoimmune encephalitis. Copyright © 2015 Elsevier Inc. All rights reserved.

Characterization of the adhesion of thin film by Cross-Sectional Nanoindentation. Analysis of the substrate edge chipping and the film delamination

Science.gov (United States)

Felder, Eric; Roy, Sébastien; Darque-Ceretti, Evelyne

2011-07-01

Cross-Sectional Nanoindentation (CSN) is a recent method for adhesion measurement of nanoscale thin films in Ultra-Large Scale Integrated circuits. In the case of ductile thin films, the motion of the substrate chip implies significant plastic deformation of the film and complex geometry of delaminated areas. This article recalls first the experimental procedure and the two main features observed in this test performed on various plane copper films deposited on silicon: the critical force producing silicon edge chipping increases linearly with the distance of the indenter to the interface; on the section the delaminated length of the film ( a-b) is proportional to the residual silicon chip displacement u and the ratio S=u/(a-b) depends on the manufacturing process of the film, and is so related to its adhesion to the substrate. One proposes a simple analysis of the silicon edge chipping. Then a model of pull-off of an elastic-strain hardening plastic film is developed, which suggests an explanation for the delamination process. Application of the model to experimental results starting from films plastic properties deduced from nanoindentation measurements provides plausible results. Some improvements for performing the CSN test are proposed in order to make easier its interpretation.

Comparison of histologic healing and biomechanical characteristics between repair techniques for a delaminated rotator cuff tear in rabbits.

Science.gov (United States)

Cheon, Sang-Jin; Kim, Jung-Han; Gwak, Heui-Chul; Kim, Chang-Wan; Kim, Jeon-Kyo; Park, Ji-Hwan

2017-05-01

The purpose of this study was to compare histologic healing and biomechanical characteristics between 2 repair techniques (layer by layer, repair of each layer to bone separately; and whole layer, repair of each layer to the bone en masse) for delaminated rotator cuff tear. Rabbits were used as subjects and classified into 2 groups: group A, right side, the layer-by-layer repair group; and group B, left side, the whole-layer repair group. Histologic evaluations were done at 3 weeks (n = 7) and 6 weeks (n = 4) after operation. Biomechanical tests to evaluate the tensile property were done at time 0 (n = 5) and 3 weeks (n = 5) after operation. Histologic healing improved in all groups. A smaller cleft was found between layers in group B compared with the cleft in group A at 3 weeks after operation. At time 0, group A showed a higher yield load and ultimate failure load (67 ± 10.5 N and 80 ± 7.8 N, respectively). However, at 3 weeks after operation, group B showed a higher yield load (48 ± 7.6 N). In the delaminated rotator cuff tear model in the rabbit, the whole-layer repair showed a narrow gap between layers and a higher yield load at 3 weeks after operation. Surgical techniques that unite the cleft in a delaminated tear could improve biomechanical strength after operation. Copyright © 2017 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

The ‘Sticky Elastica’: delamination blisters beyond small deformations

KAUST Repository

Wagner, Till J. W.

2013-01-01

We consider the form of an elastic loop adhered to a rigid substrate: the \\'Sticky Elastica\\'. In contrast to previous studies of the shape of delamination \\'blisters\\', the theory developed accounts for deflections with large slope (i.e. geometrically nonlinear). Starting from the classical Euler Elastica we provide numerical results for the dimensions of such blisters for a variety of end-end confinements and develop asymptotic expressions that reproduce these results well, even up to the point of self-contact. Interestingly, we find that the width of such blisters does not grow monotonically with increased confinement. Our theoretical predictions are confirmed by simple desktop experiments and suggest a new method for the measurement of the elastocapillary length for deformations that cannot be considered small. We discuss the implications of our results for applications such as flexible electronics. © 2013 The Royal Society of Chemistry.

Layered zinc hydroxide salts: Delamination, preferred orientation of hydroxide lamellae, and formation of ZnO nanodiscs

Czech Academy of Sciences Publication Activity Database

Demel, Jan; Pleštil, Josef; Bezdička, Petr; Janda, Pavel; Klementová, Mariana; Lang, Kamil

2011-01-01

Roč. 360, č. 2 (2011), s. 532-539 ISSN 0021-9797 R&D Projects: GA MŠk ME09058; GA ČR GAP207/10/1447 Institutional research plan: CEZ:AV0Z40320502; CEZ:AV0Z40500505; CEZ:AV0Z40400503 Keywords : layered zinc hydroxide * delamination * exfoliation * hydroxide layer * ZnO Subject RIV: CA - Inorganic Chemistry Impact factor: 3.070, year: 2011

Onset of scour below pipelines and self-burial

DEFF Research Database (Denmark)

Sumer, B. Mutlu; Truelsen, Christoffer; Sichmann, T.

2001-01-01

This paper summarizes the results of an experimental study on the onset of scour below and self-burial of pipelines in currents/waves. Pressure was measured on the surface of a slightly buried pipe at two points, one at the upstream side and the other at the downstream side of the pipe, both...... in the sand bed. The latter enabled the pressure gradient (which drives a seepage flow underneath the pipe) to be calculated. The results indicated that the excessive seepage flow and the resulting piping are the major factor to cause the onset of scour below the pipeline. The onset of scour occurred always...... locally (but not along the length of the pipeline as a two-dimensional process). The critical condition corresponding to the onset of scour was determined both in the case of currents and in the case of waves. Once the scour breaks out, it will propagate along the length of the pipeline, scour holes being...

Novel method of assessing delamination of the anterior lens capsule using spectral-domain optical coherence tomography

OpenAIRE

Tan, Deborah KL; Aung, Tin; Perera, Shamira A

2012-01-01

Deborah KL Tan,1 Tin Aung,1–3 Shamira A Perera1,21Singapore National Eye Centre, Singapore; 2Singapore Eye Research Institute, Singapore; 3National University of Singapore, Yong Loo Lin School of Medicine, SingaporeBackground: Delamination of the anterior lens capsule producing a double-ring sign during continuous curvilinear capsulorhexis is commonly associated with true exfoliation syndrome.Methods: Previous studies have concentrated on light- and transmission-electron microscopic...

Ictal SPECT Using an Attachable Automated Injector: Clinical Usefulness in the Prediction of Ictal Onset Zone

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung-Ju (Dept. of Neurology, Eulji General Hospital, Eulji Univ. College of Medicine, Seoul (Korea)). e-mail. sangunlee@dreamwiz.com; Lee, Sang Kun (Dept. of Neurology, Seoul National Univ. College of Medicine, Seoul (Korea)); Choi, Jang Wuk (Dept. of Neurology, Seoul National Univ. Hospital, Seoul (Korea)) (and others)

2009-12-15

Background: Ictal single-photon emission computed tomography (SPECT) is a valuable method for localizing the ictal onset zone in the presurgical evaluation of patients with intractable epilepsy. Conventional methods used to localize the ictal onset zone have problems with time lag from seizure onset to injection. Purpose: To evaluate the clinical usefulness of a method that we developed, which involves an attachable automated injector (AAI), in reducing time lag and improving the ability to localize the zone of seizure onset. Material and Methods: Patients admitted to the epilepsy monitoring unit (EMU) between January 1, 2003, and June 30, 2008, were included. The definition of ictal onset zone was made by comprehensive review of medical records, magnetic resonance imaging (MRI), data from video electroencephalography (EEG) monitoring, and invasive EEG monitoring if available. We comprehensively evaluated the time lag to injection and the image patterns of ictal SPECT using traditional visual analysis, statistical parametric mapping-assisted, and subtraction ictal SPECT coregistered to an MRI-assisted means of analysis. Image patterns were classified as localizing, lateralizing, and nonlateralizing. The whole number of patients was 99: 48 in the conventional group and 51 in the AAI group. Results: The mean (SD) delay time to injection from seizure onset was 12.4+-12.0 s in the group injected by our AAI method and 40.4+-26.3 s in the group injected by the conventional method (P=0.000). The mean delay time to injection from seizure detection was 3.2+-2.5 s in the group injected by the AAI method and 21.4+-9.7 s in the group injected by the conventional method (P=0.000). The AAI method was superior to the conventional method in localizing the area of seizure onset (36 out of 51 with AAI method vs. 21 out of 48 with conventional method, P=0.009), especially in non-temporal lobe epilepsy (non-TLE) patients (17 out of 27 with AAI method vs. 3 out of 13 with conventional

Ictal SPECT using an attachable automated injector: clinical usefulness in the prediction of ictal onset zone.

Science.gov (United States)

Lee, Jung-Ju; Lee, Sang Kun; Choi, Jang Wuk; Kim, Dong-Wook; Park, Kyung Il; Kim, Bom Sahn; Kang, Hyejin; Lee, Dong Soo; Lee, Seo-Young; Kim, Sung Hun; Chung, Chun Kee; Nam, Hyeon Woo; Kim, Kwang Ki

2009-12-01

Ictal single-photon emission computed tomography (SPECT) is a valuable method for localizing the ictal onset zone in the presurgical evaluation of patients with intractable epilepsy. Conventional methods used to localize the ictal onset zone have problems with time lag from seizure onset to injection. To evaluate the clinical usefulness of a method that we developed, which involves an attachable automated injector (AAI), in reducing time lag and improving the ability to localize the zone of seizure onset. Patients admitted to the epilepsy monitoring unit (EMU) between January 1, 2003, and June 30, 2008, were included. The definition of ictal onset zone was made by comprehensive review of medical records, magnetic resonance imaging (MRI), data from video electroencephalography (EEG) monitoring, and invasive EEG monitoring if available. We comprehensively evaluated the time lag to injection and the image patterns of ictal SPECT using traditional visual analysis, statistical parametric mapping-assisted, and subtraction ictal SPECT coregistered to an MRI-assisted means of analysis. Image patterns were classified as localizing, lateralizing, and nonlateralizing. The whole number of patients was 99: 48 in the conventional group and 51 in the AAI group. The mean (SD) delay time to injection from seizure onset was 12.4+/-12.0 s in the group injected by our AAI method and 40.4+/-26.3 s in the group injected by the conventional method (P=0.000). The mean delay time to injection from seizure detection was 3.2+/-2.5 s in the group injected by the AAI method and 21.4+/-9.7 s in the group injected by the conventional method (P=0.000). The AAI method was superior to the conventional method in localizing the area of seizure onset (36 out of 51 with AAI method vs. 21 out of 48 with conventional method, P=0.009), especially in non-temporal lobe epilepsy (non-TLE) patients (17 out of 27 with AAI method vs. 3 out of 13 with conventional method, P=0.041), and in lateralizing the

Local fatigue behavior in tapered areas of large offshore wind turbine blades

DEFF Research Database (Denmark)

Raeis Hosseiny, Seyed Aydin; Jakobsen, Johnny

2016-01-01

failure of an entire blade structure. The local strength degradation under an ultimate static loading, subsequent to several years of fatigue, is predicted for an offshore wind turbine blade. Fatigue failure indexes of different damage modes are calculated using a sub-modeling approach. Multi axial...... knock-down factors for ply-drop effects in wind turbine blades under multi-axial static and fatigue loadings can be obtained.......Thickness transitions in load carrying elements lead to improved geometries and efficient material utilization. However, these transitions may introduce localized areas with high stress concentrations and may act as crack initiators that could potentially cause delamination and further catastrophic...

Cardiovascular assessment of asymptomatic patients with juvenile-onset localized and systemic scleroderma: 10 years prospective observation.

Science.gov (United States)

Borowiec, A; Dabrowski, R; Wozniak, J; Jasek, S; Chwyczko, T; Kowalik, I; Musiej-Nowakowska, E; Szwed, H

2012-02-01

The aim of the present study was non-invasive evaluation of the cardiovascular system in asymptomatic young adult patients with juvenile localized scleroderma (JLS) and juvenile systemic sclerosis (JSS). A group of 34 consecutive children with scleroderma were prospectively observed in the study. The control group (CG) consisted of 20 healthy subjects. In each subject 12-lead electrocardiographic, echocardiographic, ECG Holter, and ambulatory blood pressure monitoring examinations were performed at the baseline visit and after 10 years. Additionally, B-type natriuretic peptide (BNP) concentrations were measured after 10 years. Examinations were performed in 13 patients with JLS and 15 with JSS at the final visit. Two children had died (one from each group). Four patients were alive but refused the final visit. After 10 years, a higher prevalence of ventricular extrasystoles (p = 0.01) and an elevated pulmonary arterial pressure (JLS: p = 0.04, JSS: p = 0.03) were observed in both groups, but in comparison with the controls there was no significant difference at the final visit. In JLS patients more cases of left ventricle diastolic dysfunction, hypertension, and sinus tachycardia were diagnosed at the final visit (p ≤ 0.05). More atrioventricular block episodes in both groups of scleroderma patients were observed. Over the 10 years, arterial hypertension was diagnosed in three patients from the JLS group and in two with JSS. There were no significant differences in BNP concentrations at the final visit. The results of the present study show that juvenile scleroderma seems to be more benign than adult-onset disease. This observational study shows subclinical, not severe, cardiac abnormalities in adult patients with juvenile-onset disease.

The Effect of Veneer Layers on the Bending Shear Strength and Delamination of Laminated Veneer Lumber (LVL) from Oil Palm Trunk (OPT)

Science.gov (United States)

Jamaludin, M. A.; Nordin, K.; Bahari, S. A.; Ahmad, M.

2010-03-01

The aim of this study was to evaluate the effects of the number of veneer layers on the bending shear strength and delamination of Laminated Veneer Lumber (LVL) from oil palm trunk (OPT). Five (5), Six (6) and Seven (7) veneer layers of OPT LVL were manufactured. The dimension of the boards was 45 cm by 45 cm by 1.9 cm. The boards were hot pressed for 13 minutes at a pressure of 31 kgf per m2. Urea formaldehyde (UF) supplied by a local adhesive manufacturer was used as the binder for the boards. The bending shear tests consisted of the edgewise and flatwise tests, whereas the delamination test consisted of the cold and hot water boil tests. The preparation of the test specimens and tests set-up was in accordance to the Japanese Standards, JAS-1991 [1]. Six replications were used for each test. The results were analyzed by Analysis of Variance (ANOVA) using the Duncan's Multiple Range Test to test for significant differences. The results indicated that as the number of layers increased the strength also increased. All the boards passed the standard. The difference in strength between the different types of samples was significant at 95 percent confidence level. Bending shear failures were primarily in the veneers. It is possible to use the boards as light weight interior building and furniture components. Over the years, the supply of quality timber resources from the natural forest has decrease as the wood-based industry experienced rapid growth. The supply of rubberwood for the furniture industry is also decreasing as a result of increase latex price. Accordingly, OPT LVL can be an alternative or supplementary raw material for the wood-based industry.

Adhesion-delamination phenomena at the surfaces and interfaces in microelectronics and MEMS structures and packaged devices

International Nuclear Information System (INIS)

Khanna, V K

2011-01-01

Physico-chemical mechanisms of adhesion and debonding at the various surfaces and interfaces of semiconductor devices, integrated circuits and microelectromechanical systems are systematically examined, starting from chip manufacturing and traversing the process stages to the ultimate finished product. Sources of intrinsic and thermal stresses in these devices are pointed out. Thin film ohmic contacts to the devices call for careful attention. The role of an adhesion layer in multilayer metallization schemes is highlighted. In packaged devices, sites facing potential risks of delamination are indicated. As MEMS devices incorporate moving parts, there are additional issues due to adhesion of suspended structures to surfaces in the vicinity, both during chip fabrication and their subsequent operation. Proper surface treatments for preventing adhesion together with design considerations for overcoming stiction pave the way to reliable functioning of these devices. Adhesion-delamination issues in microelectronics and MEMS continue to pose significant challenges to both design and process engineers. This paper is an attempt to survey the adhesion characteristics of materials, their compatibilities and limitations and look at future research trends. In addition, it addresses some of the techniques for improved or reduced adhesion, as demanded by the situation. The paper encompasses fundamental aspects to contemporary applications.

MODELLING THE DELAMINATION FAILURE ALONG THE CFRP-CFST BEAM INTERACTION SURFACE USING DIFFERENT FINITE ELEMENT TECHNIQUES

Directory of Open Access Journals (Sweden)

AHMED W. AL-ZAND

2017-01-01

Full Text Available Nonlinear finite element (FE models are prepared to investigate the behaviour of concrete-filled steel tube (CFST beams strengthened by carbon fibre reinforced polymer (CFRP sheets. The beams are strengthened from the bottom side only by varied sheet lengths (full and partial beam lengths and then subjected to ultimate flexural loads. Three surface interaction techniques are used to implement the bonding behaviour between the steel tube and the CFRP sheet, namely, full tie interaction (TI, cohesive element (CE and cohesive behaviour (CB techniques using ABAQUS software. Results of the comparison between the FE analysis and existing experimental study confirm that the FE models with the TI technique could be applicable for beams strengthened by CFRP sheets with a full wrapping length; the technique could not accurately implement the CFRP delamination failure, which occurred for beams with a partial wrapping length. Meanwhile, the FE models with the CE and CB techniques are applicable in the implementation of both CFRP failures (rapture and delamination for both full and partial wrapping lengths, respectively. Where, the ultimate loads' ratios achieved by the FE models using TI, CE and CB techniques about 1.122, 1.047 and 1.045, respectively, comparing to the results of existing experimental tests.

A fiber bridging model for fatigue delamination in composite materials

International Nuclear Information System (INIS)

Gregory, Jeremy R.; Spearing, S. Mark

2004-01-01

A fiber bridging model has been created to examine the effects of bridging on Mode I delamination fatigue fracture in a carbon fiber polymer-matrix composite. The model uses a cohesive zone law that is derived from quasi-static R-curves to determine the bridging energy applied in the bridged region. Timoshenko beam theory and an iterative self-consistent scheme are used to calculate the bridging tractions and displacements. After applying the bridging model to crack propagation data the scatter in the data was significantly reduced and clear trends were observed as a function of temperature that were not apparent previously. This indicated that the model appropriately accounted for the bridging in the experiments. Scanning electron microscopy crack opening displacement measurements were performed to validate the model's predictions. The measurements showed that the predictions were close to the actual bridging levels in the specimen

Synthesis, anion exchange, and delamination of Co-Al layered double hydroxide: assembly of the exfoliated nanosheet/polyanion composite films and magneto-optical studies.

Science.gov (United States)

Liu, Zhaoping; Ma, Renzhi; Osada, Minoru; Iyi, Nobuo; Ebina, Yasuo; Takada, Kazunori; Sasaki, Takayoshi

2006-04-12

This paper describes a systematic study on the synthesis, anion exchange, and delamination of Co-Al layered double hydroxide (LDH), with the aim of achieving fabrication and clarifying the properties of LDH nanosheet/polyanion composite films. Co-Al-CO3 LDH hexagonal platelets of 4 mum in lateral size were synthesized by the urea method under optimized reaction conditions. The as-prepared CO3(2-)-LDH was converted to Cl- -LDH by treating with a NaCl-HCl mixed solution, retaining its high crystallinity and hexagonal platelike morphology. LDHs intercalated with a variety of anions (such as NO3-, ClO4-, acetate, lactate, dodecyl sulfate, and oleate) were further prepared from Cl- -LDH via an anion-exchange process employing corresponding salts. Exchanged products in various anion forms were found to show different delamination behaviors in formamide. Among them, best results were observed for NO3- -LDH in terms of the exfoliating degree and the quality of the exfoliated nanosheets. The delamination gave a pink transparent suspension containing well-defined nanosheets with lateral sizes of up to 2 microm. The resulting nanosheets were assembled layer-by-layer with an anionic polymer, poly(sodium styrene 4-sulfonate) (PSS), onto quartz glass substrates to produce composite films. Magnetic circular dichroism (MCD) measurements revealed that the assembled multilayer films exhibited an interesting magneto-optical response.

Implementing statistical analysis in multi-channel acoustic impact-echo testing of concrete bridge decks: Determining thresholds for delamination detection

Science.gov (United States)

Hendricks, Lorin; Spencer Guthrie, W.; Mazzeo, Brian

2018-04-01

An automated acoustic impact-echo testing device with seven channels has been developed for faster surveying of bridge decks. Due to potential variations in bridge deck overlay thickness, varying conditions between testing passes, and occasional imprecise equipment calibrations, a method that can account for variations in deck properties and testing conditions was necessary to correctly interpret the acoustic data. A new methodology involving statistical analyses was therefore developed. After acoustic impact-echo data are collected and analyzed, the results are normalized by the median for each channel, a Gaussian distribution is fit to the histogram of the data, and the Kullback-Leibler divergence test or Otsu's method is then used to determine the optimum threshold for differentiating between intact and delaminated concrete. The new methodology was successfully applied to individual channels of previously unusable acoustic impact-echo data obtained from a three-lane interstate bridge deck surfaced with a polymer overlay, and the resulting delamination map compared very favorably with the results of a manual deck sounding survey.

A combined experimental and theoretical approach to establish the relationship between shear force and clay platelet delamination in melt-processed polypropylene nanocomposites

CSIR Research Space (South Africa)

Bandyopadhyay, J

2014-04-01

Full Text Available In this article, a combined experimental and theoretical approach has been proposed to establish a relationship between the required shear force and the degree of delamination of clay tactoids during the melt-processing of polymer nanocomposites...

Influence of Time-Series Normalization, Number of Nodes, Connectivity and Graph Measure Selection on Seizure-Onset Zone Localization from Intracranial EEG.

Science.gov (United States)

van Mierlo, Pieter; Lie, Octavian; Staljanssens, Willeke; Coito, Ana; Vulliémoz, Serge

2018-04-26

We investigated the influence of processing steps in the estimation of multivariate directed functional connectivity during seizures recorded with intracranial EEG (iEEG) on seizure-onset zone (SOZ) localization. We studied the effect of (i) the number of nodes, (ii) time-series normalization, (iii) the choice of multivariate time-varying connectivity measure: Adaptive Directed Transfer Function (ADTF) or Adaptive Partial Directed Coherence (APDC) and (iv) graph theory measure: outdegree or shortest path length. First, simulations were performed to quantify the influence of the various processing steps on the accuracy to localize the SOZ. Afterwards, the SOZ was estimated from a 113-electrodes iEEG seizure recording and compared with the resection that rendered the patient seizure-free. The simulations revealed that ADTF is preferred over APDC to localize the SOZ from ictal iEEG recordings. Normalizing the time series before analysis resulted in an increase of 25-35% of correctly localized SOZ, while adding more nodes to the connectivity analysis led to a moderate decrease of 10%, when comparing 128 with 32 input nodes. The real-seizure connectivity estimates localized the SOZ inside the resection area using the ADTF coupled to outdegree or shortest path length. Our study showed that normalizing the time-series is an important pre-processing step, while adding nodes to the analysis did only marginally affect the SOZ localization. The study shows that directed multivariate Granger-based connectivity analysis is feasible with many input nodes (> 100) and that normalization of the time-series before connectivity analysis is preferred.

Onset of self-assembly

International Nuclear Information System (INIS)

Chitanvis, S.M.

1998-01-01

We have formulated a theory of self-assembly based on the notion of local gauge invariance at the mesoscale. Local gauge invariance at the mesoscale generates the required long-range entropic forces responsible for self-assembly in binary systems. Our theory was applied to study the onset of mesostructure formation above a critical temperature in estane, a diblock copolymer. We used diagrammatic methods to transcend the Gaussian approximation and obtain a correlation length ξ∼(c-c * ) -γ , where c * is the minimum concentration below which self-assembly is impossible, c is the current concentration, and γ was found numerically to be fairly close to 2/3. The renormalized diffusion constant vanishes as the critical concentration is approached, indicating the occurrence of critical slowing down, while the correlation function remains finite at the transition point. copyright 1998 The American Physical Society

Very early-onset schizophrenia with secondary onset tic disorder

OpenAIRE

Shilpa A Telgote; Shreyas Shrikant Pendharkar; Amol D Kelkar; Sachin Bhojane

2017-01-01

Very early-onset schizophrenia (defined as an onset of psychosis before 13 years of age) is a rare and severe form of the disorder which is clinically and neurobiologically continuous with the adult-onset disorder. It is rarely reported

Very Early-onset Schizophrenia with Secondary Onset Tic Disorder.

Science.gov (United States)

Telgote, Shilpa A; Pendharkar, Shreyas Shrikant; Kelkar, Amol D; Bhojane, Sachin

2017-01-01

Very early-onset schizophrenia (defined as an onset of psychosis before 13 years of age) is a rare and severe form of the disorder which is clinically and neurobiologically continuous with the adult-onset disorder. It is rarely reported tic disorder.

Factor analysis of symptom profile in early onset and late onset OCD.

Science.gov (United States)

Grover, Sandeep; Sarkar, Siddharth; Gupta, Gourav; Kate, Natasha; Ghosh, Abhishek; Chakrabarti, Subho; Avasthi, Ajit

2018-04-01

This study aimed to assess the factor structure of early and late onset OCD. Additionally, cluster analysis was conducted in the same sample to assess the applicability of the factors. 345 participants were assessed with Yale Brown Obsessive Compulsive Scale symptom checklist. Patients were classified as early onset (onset of symptoms at age ≤ 18 years) and late onset (onset at age > 18 years) OCD depending upon the age of onset of the symptoms. Factor analysis and cluster analysis of early-onset and late-onset OCD was conducted. The study sample comprised of 91 early onset and 245 late onset OCD subjects. Males were more common in the early onset group. Differences in the frequency of phenomenology related to contamination related, checking, repeating, counting and ordering/arranging compulsions were present across the early and late onset groups. Factor analysis of YBOCS revealed a 3 factor solution for both the groups, which largely concurred with each other. These factors were named as hoarding and symmetry (factor-1), contamination (factor-2) and aggressive, sexual and religious factor (factor-3). To conclude this study shows that factor structure of symptoms of OCD seems to be similar between early-onset and late-onset OCD. Copyright © 2017 Elsevier B.V. All rights reserved.

Determination of a cohesive law for delamination modelling - Accounting for variation in crack opening and stress state across the test specimen width

DEFF Research Database (Denmark)

Joki, R. K.; Grytten, F.; Hayman, Brian

2016-01-01

by differentiating the fracture resistance with respect to opening displacement at the initial location of the crack tip, measured at the specimen edge. 2) Extend the bridging law to a cohesive law by accounting for crack tip fracture energy. 3) Fine-tune the cohesive law through an iterative modelling approach so......The cohesive law for Mode I delamination in glass fibre Non-Crimped Fabric reinforced vinylester is determined for use in finite element models. The cohesive law is derived from a delamination test based on DCB specimens loaded with pure bending moments taking into account the presence of large...... that the changing state of stress and deformation across the width of the test specimen is taken into account. The changing state of stress and deformation across the specimen width is shown to be significant for small openings (small fracture process zone size). This will also be important for the initial part...

[Severe late-onset group B streptococcal infection. A case report].

Science.gov (United States)

Haase, Roland; Nagel, Frank; Hirsch, Wolfgang; Sitka, Uwe

2003-01-01

Group B Streptococcus (GBS) is a well-known cause of neonatal pneumonia, sepsis and meningitis. Peripartal antibiotic prophylaxis for early-onset GBS infection is in routine use since the beginning of the last decade, but strategies for effective prevention of late-onset GBS infections are still lacking. Few hours after discharge from a non-local maternity ward a 3-week-old boy was admitted to our hospital because of GBS meningitis with necrotizing encephalomalacia. Maternal mastitis, not a disease of the baby, had led to the first admission. Case history and negative maternal swabs and cultures for GBS led to the hypothesis of nosocomial infection. Screening and risk based peripartal antibiotic prophylaxis, better monitoring and improved therapeutic modalities have reduced the incidence and mortality of early-onset GBS infections, but peripartal prophylaxis failed to influence late-onset GBS infections. Up to 40 % of infants with late-onset meningitis develop neurological sequelae. Maternal vaccination with multivalent conjugate vaccines against GBS is a new strategy which may lead to passive protection of the infant. Further studies to examine the efficacy of vaccines are in progress.

Cerebellar pathology in childhood-onset vs. adult-onset essential tremor.

Science.gov (United States)

Louis, Elan D; Kuo, Sheng-Han; Tate, William J; Kelly, Geoffrey C; Faust, Phyllis L

2017-10-17

Although the incidence of ET increases with advancing age, the disease may begin at any age, including childhood. The question arises as to whether childhood-onset ET cases manifest the same sets of pathological changes in the cerebellum as those whose onset is during adult life. We quantified a broad range of postmortem features (Purkinje cell [PC] counts, PC axonal torpedoes, a host of associated axonal changes [PC axonal recurrent collateral count, PC thickened axonal profile count, PC axonal branching count], heterotopic PCs, and basket cell rating) in 60 ET cases (11 childhood-onset and 49 adult-onset) and 30 controls. Compared to controls, childhood-onset ET cases had lower PC counts, higher torpedo counts, higher heterotopic PC counts, higher basket cell plexus rating, and marginally higher PC axonal recurrent collateral counts. The median PC thickened axonal profile count and median PC axonal branching count were two to five times higher in childhood-onset ET than controls, but the differences did not reach statistical significance. Childhood-onset and adult-onset ET had similar PC counts, torpedo counts, heterotopic PC counts, basket cell plexus rating, PC axonal recurrent collateral counts, PC thickened axonal profile count and PC axonal branching count. In conclusion, we found that childhood-onset and adult-onset ET shared similar pathological changes in the cerebellum. The data suggest that pathological changes we have observed in the cerebellum in ET are a part of the pathophysiological cascade of events in both forms of the disease and that both groups seem to reach the same pathological endpoints at a similar age of death. Copyright © 2017 Elsevier B.V. All rights reserved.

Attention capture by contour onsets and offsets: no special role for onsets.

Science.gov (United States)

Watson, D G; Humphreys, G W

1995-07-01

In five experiments, we investigated the power of targets defined by the onset or offset of one of an object's parts (contour onsets and offsets) either to guide or to capture visual attention. In Experiment 1, search for a single contour onset target was compared with search for a single contour offset target against a static background of distractors; no difference was found between the efficiency with which each could be detected. In Experiment 2, onsets and offsets were compared for automatic attention capture, when both occurred simultaneously. Unlike in previous studies, the effects of overall luminance change, new-object creation, and number of onset and offset items were controlled. It was found that contour onset and offset items captured attention equally well. However, display size effects on both target types were also apparent. Such effects may have been due to competition for selection between multiple onset and offset stimuli. In Experiments 3 and 4, single onset and offset stimuli were presented simultaneously and pitted directly against one another among a background of static distractors. In Experiment 3, we examined "guided search," for a target that was formed either from an onset or from an offset among static items. In Experiment 4, the onsets and offsets were uncorrelated with the target location. Similar results occurred in both experiments: target onsets and offsets were detected more efficiently than static stimuli which needed serial search; there remained effects of display size on performance; but there was still no advantage for onsets. In Experiment 5, we examined automatic attention capture by single onset and offset stimuli presented individually among static distractors. Again, there was no advantage for onset over offset targets and a display size effect was also present. These results suggest that, both in isolation and in competition, onsets that do not form new objects neither guide nor gain automatic attention more efficiently

DEAR1 is a dominant regulator of acinar morphogenesis and an independent predictor of local recurrence-free survival in early-onset breast cancer.

Directory of Open Access Journals (Sweden)

Steven T Lott

2009-05-01

Full Text Available Breast cancer in young women tends to have a natural history of aggressive disease for which rates of recurrence are higher than in breast cancers detected later in life. Little is known about the genetic pathways that underlie early-onset breast cancer. Here we report the discovery of DEAR1 (ductal epithelium-associated RING Chromosome 1, a novel gene encoding a member of the TRIM (tripartite motif subfamily of RING finger proteins, and provide evidence for its role as a dominant regulator of acinar morphogenesis in the mammary gland and as an independent predictor of local recurrence-free survival in early-onset breast cancer.Suppression subtractive hybridization identified DEAR1 as a novel gene mapping to a region of high-frequency loss of heterozygosity (LOH in a number of histologically diverse human cancers within Chromosome 1p35.1. In the breast epithelium, DEAR1 expression is limited to the ductal and glandular epithelium and is down-regulated in transition to ductal carcinoma in situ (DCIS, an early histologic stage in breast tumorigenesis. DEAR1 missense mutations and homozygous deletion (HD were discovered in breast cancer cell lines and tumor samples. Introduction of the DEAR1 wild type and not the missense mutant alleles to complement a mutation in a breast cancer cell line, derived from a 36-year-old female with invasive breast cancer, initiated acinar morphogenesis in three-dimensional (3D basement membrane culture and restored tissue architecture reminiscent of normal acinar structures in the mammary gland in vivo. Stable knockdown of DEAR1 in immortalized human mammary epithelial cells (HMECs recapitulated the growth in 3D culture of breast cancer cell lines containing mutated DEAR1, in that shDEAR1 clones demonstrated disruption of tissue architecture, loss of apical basal polarity, diffuse apoptosis, and failure of lumen formation. Furthermore, immunohistochemical staining of a tissue microarray from a cohort of 123 young

Onset of local ordering in some copper-based alloys: critical solute concentration vis-a-vis various solutionhardening parameters

Science.gov (United States)

Butt, Muhammad Zakria; Noshi, Mozina; Bashir, Farooq

2008-12-01

The mode of planar distribution of solute atoms in Cu single crystals alloyed with 0.5 to 8.0 at.%Ge has been investigated via the temperature dependence of the critical resolved shear stress of these alloys. It is found that there exists a critical solute concentration c m ≈ 5 at.%Ge below which the distribution of solute atoms in the crystal is random, and above which some local ordering occurs. This together with such data available in the literature for Cu-Zn, Cu-Al and Cu-Mn alloys, i.e. c m ≈7 at. %Zn, 7 at.%Al and 1 at.%Mn, when examined as a function of the size-misfit factor δ = (1/ b)(d b/d c)of a given binary alloy system, shows that the value of c m strongly depends on δ; the smaller the magnitude of δ, the greater the value of c m and vice versa. Also, the value of c m is found to correlate well with the electron-to-atom ratio ( e/a)of the Cu-Zn, Cu-Al, Cu-Ge and Cu-Mn alloys with the solute concentration c = c m . However, no systematic correlation exists between the critical solute concentration c m for the onset of local ordering and the modulus-mismatch parameter η = (1/ G)(d G/d c).

Criteria for onset of firestorms

International Nuclear Information System (INIS)

Carrier, G.F.; Fendell, F.E.; Feldman, P.S.

1983-01-01

Quantitative criteria are evolved for onset of firestorms, severe stationary (nonpropagating) holocausts arising via merger of fires from multiple simultaneous ignitions in a heavily fuel-laden urban environment. Within an hour, surface-level radial inflow from all directions sustains a large-diameter convective column that eventually reaches altitude of about 10 km (e.g., Hamburg, Dresden, Hiroshima). As the firestorm achieves peak intensity (2 to 3 hours after the ignitions), inflow speeds are inferred to attain 25 to 50 m/s; typically 12 km 2 are reduced to ashes, before winds relax to ambient levels in six-to-nine hours. Here the firestorm is interpreted to be a mesocyclone (rotating severe local storm). Even with exceedingly large heat release sustained over a concentrated area, in the presence of a very nearly autoconvectively unstable atmospheric stratification, onset of vigorous swirling on the scale of two hours requires more than concentration of circulation associated with the rotation of the earth; rather, a preexisting, if weak, circulation appears necessary for firestorm cyclogenesis

Effect of a hard coat layer on buckle delamination of thin ITO layers on a compliant elasto-plastic substrate: an experimental–numerical approach

NARCIS (Netherlands)

Sluis, van der O.; Abdallah, Amir; Bouten, P.C.P.; Timmermans, P.H.M.; Toonder, den J.M.J.; With, de G.

2011-01-01

Layer buckling and delamination is a common interfacial failure phenomenon in thin film multi-layer structures that are used in flexible display applications. Typically, the substrate is coated on both sides with a hybrid coating, calleda hard coat (HC), which acts as a gas barrier and also

Conduction at the onset of chaos

Science.gov (United States)

Baldovin, Fulvio

2017-02-01

After a general discussion of the thermodynamics of conductive processes, we introduce specific observables enabling the connection of the diffusive transport properties with the microscopic dynamics. We solve the case of Brownian particles, both analytically and numerically, and address then whether aspects of the classic Onsager's picture generalize to the non-local non-reversible dynamics described by logistic map iterates. While in the chaotic case numerical evidence of a monotonic relaxation is found, at the onset of chaos complex relaxation patterns emerge.

A possible case of radially antisunward propagating substorm onset in the near-earth magnetotail

International Nuclear Information System (INIS)

Lopez, R.E.; McEntire, R.W.; Potemra, T.A.

1990-01-01

It is generally thought that the local effects associated with substorm onset in the near-Earth magnetotail (R '' E ) have a component of propagation which is radially earthward. This study presents a case during which it is possible that the local effects of substorm onset propagated radially antisunward. We examine energetic ion and magnetic field data and energetic particle data from the geosynchronous satellite 1982-019 during a period of weak substorm activity on 11 June 1985. Although the effects of this event on the ground were very weak, the substorm had a dramatic effect on at least one portion of the near-Earth magnetotail. During the period of interest the spacecraft were in an unusually close radial alignment. The data show that phenomena which we associate with the local effects of substorm onset began at or near geosynchronous before they were observed at the station (R = 8.8R E ). We believe that this event is best explained by a near-Earth disruption of the cross-tail current sheet and the consequent formation of a substorm current wedge, and that this process had a component of expansion antisunward down the tail. (author)

Enhancement of low temperature toughness of nanoprecipitates strengthened ferritic steel by delamination structure

Energy Technology Data Exchange (ETDEWEB)

Zhao, Yu; Xu, Songsong; Li, Junpeng; Zhang, Jian [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, P R China (China); Sun, Liangwei; Chen, Liang; Sun, Guangai; Peng, Shuming [Key Laboratory of Neutron Physics and Institute of Nuclear Physics and Chemistry, China Academy of Engineering Physics (CAEP), Mianyang 621999 (China); Zhang, Zhongwu, E-mail: zwzhang@hrbeu.edu.cn [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, P R China (China)

2017-04-13

This study investigated the effects of aging and thermomechanical treatments on the microstructure evolution and mechanical properties of a nanoprecipitates strengthened ferritic steel. The toughness of steel at various temperatures was measured carefully and correlated with microstructural features. Tensile tests show that aging can improve the mechanical strength without scarifying the ductility. With high yield strength of ~1000 MPa, excellent low temperature Charpy impact energy more than 300 J at −80 °C can be obtained. The ductile brittle transition temperature (DBTT) is lower than −80 °C. The high strength can be contributed by the nanocluster precipitation as determined by small angle neutron scattering and transmission electron microscopy. The excellent low temperature toughness is attributed to the delamination structure of the steel, which blunts the cracks and restrains the crack propagation.

Low-Frequency Waves in the Near-Earth Magnetotail before Substorm Expansion Onsets

Science.gov (United States)

Miyashita, Y.; Saito, M. H.; Hiraki, Y.; Machida, S.

2013-12-01

Magnetic reconnection and dipolarization, which occur in the near-Earth magnetotail just before substorm expansion onsets, are important processes for the substorm triggering. To understand the triggering of these processes, we have investigated low-frequency waves that were observed in the near-Earth magnetotail before onsets, by performing statistical analysis based on Geotail observations and case studies based on multi-point THEMIS and Geotail observations. Here we focused our examination on ~10 min interval before onsets. We find that small-amplitude Alfven and slow-mode magnetosonic waves with a period of ~1 to 2 min continuously exist for more than 10 min before onsets. Such waves are seen not only in the initial dipolarization region but also midway between the magnetic reconnection and initial dipolarization regions. It seems that the amplitudes of the waves are larger in the off-equator plasma sheet and the plasma sheet boundary layer than at the magnetic equator and in the lobe. After onsets the waves considerably amplify in the plasma sheet. These results may imply that instabilities already begin to grow gradually in a wide region during the substorm growth phase, while their explosive growth begins in localized regions just before onsets.

Elastase-coupled beads as a tool for characterizing localized alveolar tissue destruction associated with the onset of emphysema

Science.gov (United States)

Craig, J. M.; Scott, A. L.

2013-01-01

Intratracheal elastase challenge of laboratory animals has long been established as a model for observing the physiological and morphological changes that result from alveolar destruction, the hallmark of emphysema. However, instillation of elastase suspended in buffer results in widespread inflammation and variable emphysematous lesions, which has made the identification of specific cellular and molecular events associated with the onset of emphysema difficult to define. Here we establish a bead-based elastase delivery system that induces localized tissue destruction, a key event in the initiation of emphysema. Elastase was coupled to bisacrylamide beads, which were shown to retain enzymatic activity prior to intratracheal administration in mice. C57BL/6 mice were given a single dose of 40,000 beads, which became distributed throughout the small airways and parenchyma of the lung. Elastase-coupled beads resulted in a quantifiable loss of alveolar tissue immediately surrounding the beads, an effect that was not observed with beads that lacked protein altogether or with beads containing elastase inactivated by an irreversible inhibitor. Furthermore, beads bound with active elastase elicited local recruitment of mononuclear cells, including macrophages, and polymorphonuclear neutrophils to the site of bead deposition, a feature consistent with the cellular infiltration observed following conventional solubilized elastase challenges. This work identifies a novel bead-based enzyme delivery system that also extends the elastase model of emphysema to permit the characterization of mechanisms that drive alveolar surface area loss following elastin degradation in focal emphysematous lesions. PMID:23558388

Boundary effects and the onset of Taylor vortices

Science.gov (United States)

Rucklidge, A. M.; Champneys, A. R.

2004-05-01

It is well established that the onset of spatially periodic vortex states in the Taylor-Couette flow between rotating cylinders occurs at the value of Reynolds number predicted by local bifurcation theory. However, the symmetry breaking induced by the top and bottom plates means that the true situation should be a disconnected pitchfork. Indeed, experiments have shown that the fold on the disconnected branch can occur at more than double the Reynolds number of onset. This leads to an apparent contradiction: why should Taylor vortices set in so sharply at the Reynolds number predicted by the symmetric theory, given such large symmetry-breaking effects caused by the boundary conditions? This paper offers a generic explanation. The details are worked out using a Swift-Hohenberg pattern formation model that shares the same qualitative features as the Taylor-Couette flow. Onset occurs via a wall mode whose exponential tail penetrates further into the bulk of the domain as the driving parameter increases. In a large domain of length L, we show that the wall mode creates significant amplitude in the centre at parameter values that are O( L-2) away from the value of onset in the problem with ideal boundary conditions. We explain this as being due to a Hamiltonian Hopf bifurcation in space, which occurs at the same parameter value as the pitchfork bifurcation of the temporal dynamics. The disconnected anomalous branch remains O(1) away from the onset parameter since it does not arise as a bifurcation from the wall mode.

The effect of low serum bicarbonate values on the onset of action of local anesthesia with vertical infraclavicular brachial plexus block in patients with End-stage renal failure

Directory of Open Access Journals (Sweden)

Al-mustafa Mahmoud

2010-01-01

Full Text Available Vertical infraclavicular brachial plexus block is utilized in patients with chronic renal failure at the time of creation of an arterio-venous fistula (AVF. The aim of this study is to test the effect of impaired renal function, with the resulting deranged serum electrolytes and blood gases, on the success rate and the onset of action of the local anesthetics used. In this prospective clinical study, we investigated the effect of the serum levels of sodium, potassium, urea, crea-tinine, pH, and bicarbonate on the onset of action of a mixture of lidocaine and bupivacaine administered to create infraclavicular brachial plexus block. A total of 31 patients were studied. The success rate of the block was 93.5 % (29 patients. The mean onset time for impaired or re-duced sensation was found to be 8.9 ± 4.7 mins and for complete loss of sensation, was 21.2 ± 6.7 mins. There was no significant association with serum sodium, potassium, urea, creatinine or the blood pH level (P> 0.05. The bivariate correlation between serum bicarbonate level and the partial and complete sensory loss was -0.714 and -0.433 respectively, with significant correlation (P= 0.00, 0.019. Our study suggests that infraclavicular block in patients with chronic renal failure carries a high success rate; the onset of the block is delayed in patients with low serum bicarbonate levels.

Physics of Substorm Growth Phase, Onset, and Dipolarization

Energy Technology Data Exchange (ETDEWEB)

C.Z. Cheng

2003-10-22

A new scenario of substorm growth phase, onset, and depolarization during expansion phase and the corresponding physical processes are presented. During the growth phase, as a result of enhanced plasma convection, the plasma pressure and its gradient are continued to be enhanced over the quiet-time values in the plasma sheet. Toward the late growth phase, a strong cross-tail current sheet is formed in the near-Earth plasma sheet region, where a local magnetic well is formed, the plasma beta can reach a local maximum with value larger than 50 and the cross-tail current density can be enhanced to over 10nA/m{sup 2} as obtained from 3D quasi-static magnetospheric equilibrium solutions for the growth phase. The most unstable kinetic ballooning instabilities (KBI) are expected to be located in the tailward side of the strong cross-tail current sheet region. The field lines in the most unstable KBI region map to the transition region between the region-1 and region-2 currents in the ionosphere, which is consistent with the observed initial brightening location of the breakup arc in the intense proton precipitation region. The KBI explains the AMPTE/CCE observations that a low-frequency instability with a wave period of 50-75 seconds is excited about 2-3 minutes prior to substorm onset and grows exponentially to a large amplitude at the onset of current disruption (or current reduction). At the current disruption onset higher frequency instabilities are excited so that the plasma and electromagnetic field fluctuations form a strong turbulent state. Plasma transport takes place due to the strong turbulence to relax the ambient plasma pressure profile so that the plasma pressure and current density are reduced and the ambient magnetic field intensity increases by more than a factor of 2 in the high-beta(sub)eq region and the field line geometry recovers from tail-like to dipole-like dipolarization.

Physics of Substorm Growth Phase, Onset, and Dipolarization

International Nuclear Information System (INIS)

Cheng, C.Z.

2003-01-01

A new scenario of substorm growth phase, onset, and depolarization during expansion phase and the corresponding physical processes are presented. During the growth phase, as a result of enhanced plasma convection, the plasma pressure and its gradient are continued to be enhanced over the quiet-time values in the plasma sheet. Toward the late growth phase, a strong cross-tail current sheet is formed in the near-Earth plasma sheet region, where a local magnetic well is formed, the plasma beta can reach a local maximum with value larger than 50 and the cross-tail current density can be enhanced to over 10nA/m 2 as obtained from 3D quasi-static magnetospheric equilibrium solutions for the growth phase. The most unstable kinetic ballooning instabilities (KBI) are expected to be located in the tailward side of the strong cross-tail current sheet region. The field lines in the most unstable KBI region map to the transition region between the region-1 and region-2 currents in the ionosphere, which is consistent with the observed initial brightening location of the breakup arc in the intense proton precipitation region. The KBI explains the AMPTE/CCE observations that a low-frequency instability with a wave period of 50-75 seconds is excited about 2-3 minutes prior to substorm onset and grows exponentially to a large amplitude at the onset of current disruption (or current reduction). At the current disruption onset higher frequency instabilities are excited so that the plasma and electromagnetic field fluctuations form a strong turbulent state. Plasma transport takes place due to the strong turbulence to relax the ambient plasma pressure profile so that the plasma pressure and current density are reduced and the ambient magnetic field intensity increases by more than a factor of 2 in the high-beta(sub)eq region and the field line geometry recovers from tail-like to dipole-like dipolarization

Late onset corneal ectasia after LASIK surgery.

Science.gov (United States)

Said, Ashraf; Hamade, Issam H; Tabbara, Khalid F

2011-07-01

To report late onset corneal ectasia following myopic LASIK. A retrospective cohort case series. Nineteen patients with late onset corneal ectasia following LASIK procedure were examined at The Eye Center, Riyadh, Saudi Arabia. Patients underwent LASIK for myopia with spherical equivalent ranging from -1.4 to -13.75 diopters. Age and gender, history of systemic or local diseases, and time of onset of corneal ectasia were recorded. Eye examination and corneal topographical analyses were done before and after LASIK surgery. Nineteen patients (29 eyes) with late onset corneal ectasia were identified from 1998 to 2008 in 13 male and six female patients. The mean follow-up period was 108 ± 23 months (range 72-144 months). No patient had pre-operative identifiable risk factors for corneal ectasia and the mean time of onset was 57 ± 24 months (range 24-120 months after LASIK). The pre-operative values included mean central pachymetry 553 ± 25 μm, mean keratometry reading of 42.9 ± 1.5 diopters, average oblique cylinder of 1.4 ± 1.2 diopters, posterior surface elevation of 26 ± 2.1 diopters, corneal flap thickness of 160 μm, mean spherical equivalent of -5.6 ± 3.6 diopters, and calculated residual corneal stromal bed thickness was 288 ± 35 μm. Three (5 eyes) patients developed ectasia after pregnancy. Three (4 eyes) patients developed corneal ectasia following severe adenoviral keratoconjunctivitis and had positive PCR for adenovirus type 8. Corneal ectasia may develop many years after LASIK surgery and symptoms could go undetected for some time. Pregnancy and adenoviral keratoconjunctivitis occurred post-operatively in six patients.

[Clinical research of arthroscopic separate double-layer suture bridge technique for delaminated rotator cuff tear].

Science.gov (United States)

Ren, Jiangtao; Xu, Cong; Liu, Xianglin; Wang, Jiansong; Li, Zhihuai; Lü, Yongming

2017-10-01

To explore the effectiveness of the arthroscopic separate double-layer suture bridge technique in treatment of the delaminated rotator cuff tear. Between May 2013 and May 2015, 54 patients with the delaminated rotator cuff tears were recruited in the study. They were randomly allocated into 2 groups to receive repair either using arthroscopic separate double-layer suture bridge technique (trial group, n =28) or using arthroscopic whole-layer suture bridge technique (control group, n =26). There was no significant difference in gender, age, injured side, tear type, and preoperative visual analogue scale (VAS) score, Constants score, American Shoulder and Elbow Surgeons (ASES) score, University of California Los Angeles (UCLA) score, and the range of motion of shoulder joint between 2 groups ( P >0.05). Postoperative functional scores, range of motion, and recurrence rate of tear in 2 groups were observed and compared. The operation time was significant longer in trial group than in control group ( t =8.383, P =0.000). All incisions healed at stage Ⅰ without postoperative complication. All the patients were followed up 12 months. At 12 months postoperatively, the UCLA score, ASES score, VAS score, Constant score, and the range of motion were significantly improved when compared with the preoperative values in 2 groups ( P 0.05). Four cases (14.3%) of rotator cuff tear recurred in trial group while 5 cases (19.2%) in control group, showing no significant difference ( χ 2 =0.237, P =0.626). Compared with the arthroscopic whole-layer suture bridge technique, arthroscopic separate double-layer suture bridge technique presents no significant difference in the shoulder function score, the range of motion, and recurrence of rotator cuff tear, while having a longer operation time.

Distinct Neuropsychological Mechanisms May Explain Delayed- Versus Rapid-Onset Antidepressant Efficacy

Science.gov (United States)

Stuart, Sarah A; Butler, Paul; Munafò, Marcus R; Nutt, David J; Robinson, Emma SJ

2015-01-01

The biochemical targets for antidepressants are relatively well established, but we lack a clear understanding of how actions at these proteins translate to clinical benefits. This study used a novel rodent assay to investigate how different antidepressant drugs act to modify affective biases that have been implicated in depression. In this bowl-digging task, rats encounter two equal value learning experiences on separate days (one during an affective manipulation and the other during control conditions). This induces an affective bias that is quantified using a preference test in which both digging substrates are presented together and the individual rats’ choices recorded. The assay can be used to measure affective biases associated with learning (when the treatment is given at the time of the experience) or examine the modification of previously acquired biases (when the treatment is administered before the preference test). The rapid-onset antidepressant ketamine, but not the delayed-onset antidepressant, venlafaxine, attenuated the previously acquired FG7142-induced negative bias following systemic administration. Venlafaxine but not ketamine induced a positive bias when administered before learning. We then used local drug infusions and excitotoxic lesions to localize the effects of ketamine to the medial prefrontal cortex and venlafaxine to the amygdala. Using a modified protocol we also showed that positive and negative biases amplified further when the numbers of substrate–reinforcer associations are increased. We propose that this pattern of results could explain the delayed onset of action of venlafaxine and the rapid onset of action but lack of long-term efficacy seen with ketamine. PMID:25740288

Compression of laminated composite beams with initial damage

Science.gov (United States)

Breivik, Nicole L.; Gurdal, Zafer; Griffin, O. H., Jr.

1993-01-01

The effect of isolated damage modes on the compressive strength and failure characteristics of laminated composite test specimens were evaluated experimentally and numerically. In addition to specimens without initial damage, specimens with three types of initial damage were considered: (1) specimens with short delaminations distributed evenly through the specimen thickness, (2) specimens with few long delaminations, and (3) specimens with local fiber damage in the surface plies under the three-point bend contact point. It was found that specimens with short multiple delamination experienced the greatest reduction in compression strength compared to the undamaged specimens. Single delaminations far from the specimen surface had little effect on the final compression strength, and moderate strength reduction was observed for specimens with localized surface ply damage.

Delamination-restacking behaviour of surfactant intercalated layered hydroxy double salts, M 3Zn 2(OH) 8(surf) 2ṡ2H 2O [M = Ni, Co and surf = dodecyl sulphate (DS), dodecyl benzene sulphonate (DBS)

Science.gov (United States)

Rajamathi, Jacqueline T.; Ravishankar, N.; Rajamathi, Michael

2005-02-01

Surfactant anion intercalated nickel-zinc and cobalt-zinc layered hydroxy double salts were prepared through a modified acetate hydrolysis route. These organo-inorganic hybrids delaminate readily in alcohols such as 1-butanol to give stable translucent colloids. The extent of delamination and the stability of the colloids obtained are comparable to what has been observed in the case of layered double hydroxides (LDHs). The original layered solid could be obtained either by evaporation of the colloid or precipitation by the addition of a polar solvent such as acetone.

Stereotyped high-frequency oscillations discriminate seizure onset zones and critical functional cortex in focal epilepsy.

Science.gov (United States)

Liu, Su; Gurses, Candan; Sha, Zhiyi; Quach, Michael M; Sencer, Altay; Bebek, Nerses; Curry, Daniel J; Prabhu, Sujit; Tummala, Sudhakar; Henry, Thomas R; Ince, Nuri F

2018-01-30

High-frequency oscillations in local field potentials recorded with intracranial EEG are putative biomarkers of seizure onset zones in epileptic brain. However, localized 80-500 Hz oscillations can also be recorded from normal and non-epileptic cerebral structures. When defined only by rate or frequency, physiological high-frequency oscillations are indistinguishable from pathological ones, which limit their application in epilepsy presurgical planning. We hypothesized that pathological high-frequency oscillations occur in a repetitive fashion with a similar waveform morphology that specifically indicates seizure onset zones. We investigated the waveform patterns of automatically detected high-frequency oscillations in 13 epilepsy patients and five control subjects, with an average of 73 subdural and intracerebral electrodes recorded per patient. The repetitive oscillatory waveforms were identified by using a pipeline of unsupervised machine learning techniques and were then correlated with independently clinician-defined seizure onset zones. Consistently in all patients, the stereotypical high-frequency oscillations with the highest degree of waveform similarity were localized within the seizure onset zones only, whereas the channels generating high-frequency oscillations embedded in random waveforms were found in the functional regions independent from the epileptogenic locations. The repetitive waveform pattern was more evident in fast ripples compared to ripples, suggesting a potential association between waveform repetition and the underlying pathological network. Our findings provided a new tool for the interpretation of pathological high-frequency oscillations that can be efficiently applied to distinguish seizure onset zones from functionally important sites, which is a critical step towards the translation of these signature events into valid clinical biomarkers.awx374media15721572971001. © The Author(s) (2018). Published by Oxford University Press on

Metal-etching-free direct delamination and transfer of single-layer graphene with a high degree of freedom.

Science.gov (United States)

Yang, Sang Yoon; Oh, Joong Gun; Jung, Dae Yool; Choi, HongKyw; Yu, Chan Hak; Shin, Jongwoo; Choi, Choon-Gi; Cho, Byung Jin; Choi, Sung-Yool

2015-01-14

A method of graphene transfer without metal etching is developed to minimize the contamination of graphene in the transfer process and to endow the transfer process with a greater degree of freedom. The method involves direct delamination of single-layer graphene from a growth substrate, resulting in transferred graphene with nearly zero Dirac voltage due to the absence of residues that would originate from metal etching. Several demonstrations are also presented to show the high degree of freedom and the resulting versatility of this transfer method. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Control of the onset of puberty.

Science.gov (United States)

Livadas, Sarantis; Chrousos, George P

2016-08-01

The mechanism of puberty initiation remains an enigma, despite extensive research in the field. Pulsatile pituitary gonadotropin secretion under the guidance of hypothalamic gonadotropin-releasing hormone (GnRH) constitutes a sine qua non for pubertal onset. In turn, the secretion of GnRH in the human hypothalamus is regulated by kisspeptin and its receptor as well as by permissive or opposing signals mediated by neurokinin B and dynorphin acting on their respective receptors. These three supra-GnRH regulators compose the Kisspeptin, Neurokinin B and Dynorhin neurons (KNDy) system, a key player in pubertal onset and progression. The recent discovery that makorin ring finger protein 3 is also involved in puberty initiation provided further insights into the regulation of the KNDy pathway. In fact, the inhibitory (γ-amino butyric acid, neuropeptide Y, and RFamide-related peptide-3) and stimulatory signals (glutamate) acting upstream of KNDy called into question the role of makorin ring finger protein 3 as the gatekeeper of puberty. Meanwhile, the findings that 'neuroestradiol' produced locally and endocrine disruptors from the environment may influence GnRH secretion is intriguing. Finally, epigenetic mechanisms have been implicated in pubertal onset through recently discovered mechanisms. The exact molecular machinery underlying puberty initiation in humans is under intensive investigation. In this review, we summarize research evidence in the field, while emphasizing the areas of uncertainty and underlining the impact of current information on the evolving theory regarding this fascinating phenomenon.

Early onset of significant local warming in low latitude countries

International Nuclear Information System (INIS)

Mahlstein, I; Knutti, R; Solomon, S; Portmann, R W

2011-01-01

The Earth is warming on average, and most of the global warming of the past half-century can very likely be attributed to human influence. But the climate in particular locations is much more variable, raising the question of where and when local changes could become perceptible enough to be obvious to people in the form of local warming that exceeds interannual variability; indeed only a few studies have addressed the significance of local signals relative to variability. It is well known that the largest total warming is expected to occur in high latitudes, but high latitudes are also subject to the largest variability, delaying the emergence of significant changes there. Here we show that due to the small temperature variability from one year to another, the earliest emergence of significant warming occurs in the summer season in low latitude countries (∼25 deg. S-25 deg. N). We also show that a local warming signal that exceeds past variability is emerging at present, or will likely emerge in the next two decades, in many tropical countries. Further, for most countries worldwide, a mean global warming of 1 deg. C is sufficient for a significant temperature change, which is less than the total warming projected for any economically plausible emission scenario. The most strongly affected countries emit small amounts of CO 2 per capita and have therefore contributed little to the changes in climate that they are beginning to experience.

Fatigue Life Methodology for Tapered Hybrid Composite Flexbeams

Science.gov (United States)

urri, Gretchen B.; Schaff, Jeffery R.

2006-01-01

Nonlinear-tapered flexbeam specimens from a full-size composite helicopter rotor hub flexbeam were tested under combined constant axial tension and cyclic bending loads. Two different graphite/glass hybrid configurations tested under cyclic loading failed by delamination in the tapered region. A 2-D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. The analysis results from two geometrically nonlinear finite element codes, ANSYS and ABAQUS, are presented and compared. Strain energy release rates (G) associated with simulated delamination growth in the flexbeams are presented from both codes. These results compare well with each other and suggest that the initial delamination growth from the tip of the ply-drop toward the thick region of the flexbeam is strongly mode II. The peak calculated G values were used with material characterization data to calculate fatigue life curves for comparison with test data. A curve relating maximum surface strain to number of loading cycles at delamination onset compared well with the test results.

Definition of onset in the development of onset-based alcoholism typologies.

Science.gov (United States)

Parrella, D P; Filstead, W J

1988-01-01

Age of onset of alcoholism is gaining prominence as an explanatory construct in the development of models of alcoholism. Recently, at least one investigator has cited its potential as a simple means for deriving a typological classification scheme that could have great impact, both in terms of future research and in devising treatment strategies. Various investigators, however, operationalize alcoholism onset in different ways. By comparing five definitions of the concept, we show that the proportion of individuals classified as early or late onset can vary dramatically, depending on the interpretation given to phrases such as "subjective problems." Gender differences in early-late proportions are demonstrated, and the statistical relationship of the five items used as onset indicators is described. We suggest that collecting multiple convergent definitions of onset constitutes a structured recall aid that may ameliorate some of the problems to which self-report data are subject, while additionally providing the data necessary to create an aggregate measure that will increase reliability in comparison with the items individually. Finally, we encourage description of alcoholism onset as a developmental process rather than a single event, and urge investigators to increased precision in the operationalization of this construct as research in this area progresses.

Adult-onset tic disorders

NARCIS (Netherlands)

Eapen, [No Value; Lees, AJ; Lakke, JPWF; Trimble, MR; Robertson, MM

We report on 8 patients with adult-onset motor tics and vocalisations. Three had compulsive tendencies in childhood and 3 had a family history of tics or obsessive-compulsive behaviour. In comparison with DSM-classified, younger-onset Gilles de la Tourette syndrome, adult-onset tic disorders are

Local order and onset of chaos for a family of two-dimensional dissipative mappings

Energy Technology Data Exchange (ETDEWEB)

Brambilla, R [Dipt. di Fisica, Milano Univ. (Italy); Casartelli, M [Dipt. di Fision, Parma Univ. (Italy); Unita Risonanze Magnetiche, G.N.S.M.-C.N.R., Parma (Italy))

1985-08-11

We study the stochastic transition of a family of dissipative mappings of the two-dimensional tours, having a pure rotation and an Anosov hyperbolic automorphism as limit cases. Numerical experiments show that the onset of chaos is characterized by a sudden destruction of basins of previously conserved invariant sets and by the appearance of a strange attractor. The nature of these phenomena is clarified by analytical considerations.

Guidelines for imaging infants and children with recent-onset epilepsy

International Nuclear Information System (INIS)

Gaillard, W.D.; Chiron, C.; Cross, H.; Harvey, S.; Kuzniecky, R.; Hertz-Pannier, L.

2009-01-01

The International League Against Epilepsy (ILAE) Subcommittee for Pediatric Neuroimaging examined the usefulness of, and indications for, neuroimaging in the evaluation of children with newly diagnosed epilepsy. The retrospective and prospective published series with n ≥ 30 utilizing computed tomography (CT) and magnetic resonance imaging (MRI) (1.5 T) that evaluated children with new-onset seizure(s) were reviewed. Nearly 50% of individual imaging studies in children with localization-related new-onset seizure(s) were reported to be abnormal; 15-20% of imaging studies provided useful information on etiology or and seizure focus, and 2-4% provided information that potentially altered immediate medical management. A significant imaging abnormality in the absence of a history of a localization-related seizure, abnormal neurologic examination, or focal electro-encephalography (EEG) is rare. Imaging studies in childhood absence epilepsy, juvenile absence epilepsy, juvenile myoclonic epilepsy, and benign childhood epilepsy with centro-temporal spikes (BECTS) do not identify significant structural abnormalities. Imaging provides important contributions to establishing etiology, providing prognostic information, and directing treatment in children with recently diagnosed epilepsy. Imaging is recommended when localization-related epilepsy is known or suspected, when the epilepsy classification is in doubt, or when an epilepsy syndrome with remote symptomatic cause is suspected. When available, MRI is preferred to CT because of its superior resolution, versatility, and lack of radiation. (authors)

Guidelines for imaging infants and children with recent-onset epilepsy

Energy Technology Data Exchange (ETDEWEB)

Gaillard, W.D. [Department of Neuroscience, Children' s National Medical Center, George Washington University, Washington DC (United States); Chiron, C. [Inserm, Hopital Necker-Enfants Malades, Universite Rene Descartes, Paris (France); Cross, H. [Neurosciences Unit, Institute of Child Health, and GreatOrmondStreet Hospital for Children, London (United Kingdom); Harvey, S. [Department of Neurology, Royal Children' s Hospital, University of Melbourne, Melbourne (Australia); Kuzniecky, R. [Department of Neurology, New York University School of Medicine, New York, NY (US); Hertz-Pannier, L. [Department of Radiology, Hopital Necker-Enfants Malades, Universite Descartes, Paris (FR); CEA-DSV-I2BM-Neurospin, 91191 Gif sur Yvette (FR)

2009-07-01

The International League Against Epilepsy (ILAE) Subcommittee for Pediatric Neuroimaging examined the usefulness of, and indications for, neuroimaging in the evaluation of children with newly diagnosed epilepsy. The retrospective and prospective published series with n {>=} 30 utilizing computed tomography (CT) and magnetic resonance imaging (MRI) (1.5 T) that evaluated children with new-onset seizure(s) were reviewed. Nearly 50% of individual imaging studies in children with localization-related new-onset seizure(s) were reported to be abnormal; 15-20% of imaging studies provided useful information on etiology or and seizure focus, and 2-4% provided information that potentially altered immediate medical management. A significant imaging abnormality in the absence of a history of a localization-related seizure, abnormal neurologic examination, or focal electro-encephalography (EEG) is rare. Imaging studies in childhood absence epilepsy, juvenile absence epilepsy, juvenile myoclonic epilepsy, and benign childhood epilepsy with centro-temporal spikes (BECTS) do not identify significant structural abnormalities. Imaging provides important contributions to establishing etiology, providing prognostic information, and directing treatment in children with recently diagnosed epilepsy. Imaging is recommended when localization-related epilepsy is known or suspected, when the epilepsy classification is in doubt, or when an epilepsy syndrome with remote symptomatic cause is suspected. When available, MRI is preferred to CT because of its superior resolution, versatility, and lack of radiation. (authors)

Amphibole Fractional Crystallization and Delamination in Arc Roots: Implications for the `Missing' Nb Reservoir in the Earth

Science.gov (United States)

Galster, F.; Chatterjee, R. N.; Stockli, D. F.

2017-12-01

Most geologic processes should not fractionate Nb from Ta but Earth's major silicate reservoirs have subchondritic Nb/Ta values. Nb/Ta of >10000 basalts and basaltic andesites from different tectonic settings (GEOROC) cluster around 16, indistinguishable from upper mantle values. In contrast, Nb/Ta in more evolved arc volcanics have progressively lower values, reaching continental crust estimates, and correlate negatively with SiO2 (see figure) and positively with TiO2 and MgO. This global trend suggests that differentiation processes in magmatic arcs could explain bulk crustal Nb/Ta estimates. Understanding processes that govern fractionation of Nb from Ta in arcs can provide key insights on continental crust formation and help identify Earth's `missing' Nb reservoir. Ti-rich phases (rutile, titanite and ilmenite) have DNb/DTa values in the evolved liquid. Lack of correlation between Nb/Ta and K2O in global volcanic rocks implies that biotite plays a minor role in fractionating Nb from Ta during differentiation. Experimental petrology and evidence from exposed arc sections indicate that amphibole fractionation and delamination of island arc roots can explain the andesitic composition of bulk continental crust. Experimental studies have shown that amphibole Mg# correlate with DNb/DTa and amphibole could effectively fractionate Nb from Ta. Preliminary data from lower to middle crustal amphiboles from preserved arcs show sub- to super-chondritic Nb/Ta up to >60. This suggests that delamination of amphibole-rich cumulates can be a viable mechanism for the preferential removal of Nb from the continental crust. Future examination of Nb/Ta ratios in lower crustal amphiboles from various preserved arcs will provide improved constraints on the Nb-Ta paradox of the silicate Earth.

Is Adolescent-Onset First-Episode Psychosis Different from Adult Onset?

Science.gov (United States)

Ballageer, Trevor; Malla, Ashok; Manchanda, Rahul; Takhar, Jatinder; Haricharan, Raj

2005-01-01

Objective: To examine whether first-episode psychosis patients with onset during adolescence (ages 15-18) differ significantly from those with young-adult onset (ages 19-30). Method: Consecutive patients presenting with first-episode psychosis (N = 242) were assessed for demographic and illness characteristics such as duration of untreated…

Influence of boundary conditions on the response of multilayered plates with cohesive interfaces and delaminations using a homogenized approach

Directory of Open Access Journals (Sweden)

R. Massabò

2014-07-01

Full Text Available Stress and displacement fields in multilayered composites with interfacial imperfections, such as imperfect bonding of the layers or delaminations, or where the plies are separated by thin interlayers allowing relative motion, have large variations in the thickness, with characteristic zigzag patterns and jumps at the layer interfaces. These effects are well captured by a model recently formulated by the author for multilayered plates with imperfect interfaces and affine interfacial traction laws (Massabò & Campi, Meccanica, 2014, in press; Compos Struct, 2014, 116, 311-324. The model defines a homogenized displacement field, which satisfies interfacial continuity, and uses a variational technique to derive equilibrium equations depending on only six generalized displacement functions, for any arbitrary numbers of layers and interfaces. The model accurately predicts stresses and displacements in simply supported, highly anisotropic, thick plates with continuous, sliding interfaces. In this paper the model is applied to wide plates with clamped edges and some inconsistencies, which have been noted in the literature for models based on similar approaches and have limited their utilization, are explained. A generalized transverse shear force is introduced as the gross stress resultant which is directly related to the bending moment in the equilibrium equations of multilayered structures with imperfect interfaces and substitutes for the shear force of single-layer theory. An application to a delaminated wide plate highlights the potential and limitations of the proposed model for the solution of fracture mechanics problems.

An overview on the origin of post-collisional Miocene magmatism in the Kabylies (northern Algeria): Evidence for crustal stacking, delamination and slab detachment

Science.gov (United States)

Chazot, Gilles; Abbassene, Fatiha; Maury, René C.; Déverchère, Jacques; Bellon, Hervé; Ouabadi, Aziouz; Bosch, Delphine

2017-01-01

Miocene (17-11 Ma) magmatic activity in the Kabylies emplaced K-rich (and minor medium-K) calc-alkaline plutonic and volcanic rocks in five zones, delineating a ∼450 km long EW trending strip located along the northern coast of Algeria, between Annaba and Algiers. Their most likely source is the Kabylian subcontinental lithospheric mantle previously metasomatized during the Paleogene subduction of the Tethys oceanic lithosphere. Our preferred tectono-magmatic model involves a Tethyan slab detachment combined with African mantle delamination and crustal stacking, leading to the superimposition of the African continental crust over the Kabylian metasomatized lithospheric mantle. At ca. 17 Ma, the asthenospheric upwelling arising from lithospheric delamination and Tethyan slab tear triggered the thermal erosion of the latter mantle, inducing its partial melting. The corresponding mafic medium-K calc-alkaline magmas interacted with the African basement units during their ascent, generating intermediate to felsic K-rich calc-alkaline melts that display a characteristic trace element and isotopic crustal signature. Later on, slab tears propagated eastward and westward, promoting slab rollback perpendicular to plate convergence and inducing the emplacement of magmatic rocks of decreasing ages from central-eastern Algeria towards Tunisia and Morocco.

Source localization of rhythmic ictal EEG activity

DEFF Research Database (Denmark)

Beniczky, Sándor; Lantz, Göran; Rosenzweig, Ivana

2013-01-01

Although precise identification of the seizure-onset zone is an essential element of presurgical evaluation, source localization of ictal electroencephalography (EEG) signals has received little attention. The aim of our study was to estimate the accuracy of source localization of rhythmic ictal...... EEG activity using a distributed source model....

Bending Response of Cross-Ply Laminated Composite Plates with Diagonally Perturbed Localized Interfacial Degeneration

Directory of Open Access Journals (Sweden)

Chee Zhou Kam

2013-01-01

Full Text Available A laminated composite plate element with an interface description is developed using the finite element approach to investigate the bending performance of two-layer cross-ply laminated composite plates in presence of a diagonally perturbed localized interfacial degeneration between laminae. The stiffness of the laminate is expressed through the assembly of the stiffnesses of lamina sub-elements and interface element, the latter of which is formulated adopting the well-defined virtually zero-thickness concept. To account for the extent of both shear and axial weak bonding, a degeneration ratio is introduced in the interface formulation. The model has the advantage of simulating a localized weak bonding at arbitrary locations, with various degeneration areas and intensities, under the influence of numerous boundary conditions since the interfacial description is expressed discretely. Numerical results show that the bending behavior of laminate is significantly affected by the aforementioned parameters, the greatest effect of which is experienced by those with a localized total interface degeneration, representing the case of local delamination.

Early onset type 2 diabetes

DEFF Research Database (Denmark)

Bo, A; Thomsen, R W; Nielsen, J S

2018-01-01

was more frequent and meeting physical activity recommendations less likely in persons with early-onset type 2 DM. CONCLUSIONS: We found a clear age-gradient, with increasing prevalence of clinical and behavioural risk factors the younger the onset age of type 2 DM. Younger persons with early-onset type 2......AIM: To examine the association between early onset of type 2 diabetes (DM) and clinical and behavioural risk factors for later diabetes complications. METHODS: We conducted a cross-sectional study of 5115 persons with incident type 2 DM enrolled during 2010-2015 in the Danish Centre for Strategic...... Research in Type 2 Diabetes-cohort. We compared risk factors at time of diagnosis among those diagnosed at ≤45 years (early-onset) with diagnosis age 46-55, 56-65 (average-onset = reference), 66-75, and >75 years (late-onset). Prevalence ratios (PRs) were computed using Poisson regression. RESULTS: Poor...

Retrospective study on the characteristics and treatment of late-onset vitiligo.

Science.gov (United States)

Kong, Yan Ling; Ching, Vanessa Hui Ling; Chuah, Sai Yee; Thng, Tien Guan

2017-01-01

Late-onset vitiligo, defined as being aged 50 years and above at the point of clinical onset, remains poorly characterized till now. This study aims to describe the clinical characteristics and treatment response of patients with late-onset vitiligo. We retrospectively reviewed the case records of all patients diagnosed with late-onset vitiligo, from January 1, 2010 to December 31, 2014. Information obtained included patient demographics, characteristics of vitiligo and treatment responses. Of the 3128 patients diagnosed with vitiligo over the 5-year period, 461 (14.7%) had late-onset disease. The study had more females (n = 260, 56.4%) than males, with an average onset age of 59.4 ± 7.4 years. Majority of patients were Chinese (n = 308, 66.8%) and 45 (9.8%) patients had an associated autoimmune disease. Focal vitiligo, defined as the localized presence of depigmented patches, was most common (n = 209, 45.3%). Treatment response was evaluated in 359 patients, of which 216 received monotherapy (topical creams: n = 210, 97.2%; phototherapy: n = 6, 2.8%) and 143 received both modalities. Fifty six (15.6%) patients received oral steroids. Patients who were treated with both topical creams and phototherapy yielded better clinical responses compared to those on monotherapy (P 50% return of pigmentation compared to baseline (vs. n = 66, 30.6% in the monotherapy group). The choice of phototherapy (targeted, narrowband ultraviolet B or psoralen + ultraviolet A) did not significantly affect clinical response (P = 0.774). This study is limited by its retrospective nature, the nonstandardized documentation resulting in the inability to determine disease progression and associated metabolic comorbidities and also by the gradual loss to follow-up of patients. Late-onset vitiligo is not uncommon and tends to be of the focal vitiligo subtype. Nonsegmented vitiligo is more prevalent than segmental vitiligo. Combination therapy with topical medications and phototherapy is superior

Early- versus Late-Onset Dysthymia

Science.gov (United States)

Sansone, Lori A.

2009-01-01

In the current Diagnostic and Statistical Manual of Mental Disorders, dysthymic disorder is categorized as either early-onset or late-onset, based upon the emergence of symptoms before or after the age of 21, respectively. Does this diagnostic distinction have any meaningful clinical implications? In this edition of The Interface, we present empirical studies that have, within a single study, compared individuals with early-versus late-onset dysthymia. In this review, we found that, compared to those with late-onset dysthymia, early-onset patients are more likely to harbor psychiatric comorbidity both on Axis I and II, exhibit less psychological resilience, and have more prominent family loadings for mood disorders. These findings suggest that this distinction is meaningful and that the early-onset subtype of dysthymia is more difficult to effectively treat. PMID:20049145

Association between age at onset of multiple sclerosis and vitamin D level-related factors

DEFF Research Database (Denmark)

Laursen, Julie Hejgaard; Søndergaard, Helle Bach; Sørensen, Per Soelberg

2016-01-01

OBJECTIVE: To compare vitamin D level-associated single-nucleotide polymorphisms (SNPs) in GC and CYP2R1, multiple sclerosis (MS) risk SNPs in CYP27B1, CYP24A1, and HLA-DRB1*1501, and adolescent exposure to environmental risk factors for hypovitaminosis D, with MS age at onset. METHODS: This cross......, and the study was approved by the local ethics committee. RESULTS: Younger age at onset was significantly associated with low exposure to summer sun in adolescence, higher body mass index at 20 years of age, and the HLA-DRB1*1501 risk allele in both univariate analyses and in a multivariable regression analysis....... No association was found between age at onset and any of the other SNPs or vitamin D-associated environmental factors. CONCLUSION: We demonstrate an independent effect by HLA-DRB1*1501, adolescent summer sun habits, and body mass index at the age of 20 on age at onset of MS....

Early- versus Late-Onset Systemic Sclerosis

Science.gov (United States)

Alba, Marco A.; Velasco, César; Simeón, Carmen Pilar; Fonollosa, Vicent; Trapiella, Luis; Egurbide, María Victoria; Sáez, Luis; Castillo, María Jesús; Callejas, José Luis; Camps, María Teresa; Tolosa, Carles; Ríos, Juan José; Freire, Mayka; Vargas, José Antonio; Espinosa, Gerard

2014-01-01

Abstract Peak age at onset of systemic sclerosis (SSc) is between 20 and 50 years, although SSc is also described in both young and elderly patients. We conducted the present study to determine if age at disease onset modulates the clinical characteristics and outcome of SSc patients. The Spanish Scleroderma Study Group recruited 1037 patients with a mean follow-up of 5.2 ± 6.8 years. Based on the mean ± 1 standard deviation (SD) of age at disease onset (45 ± 15 yr) of the whole series, patients were classified into 3 groups: age ≤30 years (early onset), age between 31 and 59 years (standard onset), and age ≥60 years (late onset). We compared initial and cumulative manifestations, immunologic features, and death rates. The early-onset group included 195 patients; standard-onset group, 651; and late-onset, 191 patients. The early-onset group had a higher prevalence of esophageal involvement (72% in early-onset compared with 67% in standard-onset and 56% in late-onset; p = 0.004), and myositis (11%, 7.2%, and 2.9%, respectively; p = 0.009), but a lower prevalence of centromere antibodies (33%, 46%, and 47%, respectively; p = 0.007). In contrast, late-onset SSc was characterized by a lower prevalence of digital ulcers (54%, 41%, and 34%, respectively; p < 0.001) but higher rates of heart conduction system abnormalities (9%, 13%, and 21%, respectively; p = 0.004). Pulmonary hypertension was found in 25% of elderly patients and in 12% of the youngest patients (p = 0.010). After correction for the population effects of age and sex, standardized mortality ratio was shown to be higher in younger patients. The results of the present study confirm that age at disease onset is associated with differences in clinical presentation and outcome in SSc patients. PMID:24646463

Onset of nuclear boiling in forced convection (Method of detection)

International Nuclear Information System (INIS)

Rachedi, M.

1986-01-01

Local onset of boiling in any pressure water cooling systems, as a PWR for instance, can mean a possible dangerous mismatch between the produced heat and the cooling capabilities. Its consequences can lead to serious accidental conditions and a reliable technique to detect such a phenomenon is therefore of particular need. Most techniques used up to now rely basically on local measurements and assume therefore usually the previous knowledge of the actual hot or boiling spot. The method proposed here based on externally located accelerometers appears to be sensitive to the global behaviour of the mechanical structure and is therefore not particularly bound to any exact localization of the sensors. The vibrations produced in the mechanical structure of the heated assembly are measured by accelerometers placed on the external surfaces that are easily accessible. The onset of the boiling, the growth and condensation of the bubbles on the heated wall, induces a resonance in the structure and an excitation at its particular eigen frequencies. Distinctive peaks are clearly observed in the spectral density function calculated from the accelerometer signal as soon as bubbles are produced. The technique is shown to be very sensitive even at the earliest phase of boiling and quite independent on sensor position. A complete hydrodynamic analysis of the experimental channels have been performed in order to assess the validity of the method both in steady conditions and during rapid power transients

Testing and Life Prediction for Composite Rotor Hub Flexbeams

Science.gov (United States)

Murri, Gretchen B.

2004-01-01

A summary of several studies of delamination in tapered composite laminates with internal ply-drops is presented. Initial studies used 2D FE models to calculate interlaminar stresses at the ply-ending locations in linear tapered laminates under tension loading. Strain energy release rates for delamination in these laminates indicated that delamination would likely start at the juncture of the tapered and thin regions and grow unstably in both directions. Tests of glass/epoxy and graphite/epoxy linear tapered laminates under axial tension delaminated as predicted. Nonlinear tapered specimens were cut from a full-size helicopter rotor hub and were tested under combined constant axial tension and cyclic transverse bending loading to simulate the loading experienced by a rotorhub flexbeam in flight. For all the tested specimens, delamination began at the tip of the outermost dropped ply group and grew first toward the tapered region. A 2D FE model was created that duplicated the test flexbeam layup, geometry, and loading. Surface strains calculated by the model agreed very closely with the measured surface strains in the specimens. The delamination patterns observed in the tests were simulated in the model by releasing pairs of MPCs along those interfaces. Strain energy release rates associated with the delamination growth were calculated for several configurations and using two different FE analysis codes. Calculations from the codes agreed very closely. The strain energy release rate results were used with material characterization data to predict fatigue delamination onset lives for nonlinear tapered flexbeams with two different ply-dropping schemes. The predicted curves agreed well with the test data for each case studied.

Localized scleroderma: a series of 52 patients.

Science.gov (United States)

Toledano, C; Rabhi, S; Kettaneh, A; Fabre, B; Fardet, L; Tiev, K P; Cabane, J

2009-05-01

Localized scleroderma also called morphea is a skin disorder of undetermined cause. The widely recognized Mayo Clinic Classification identifies 5 main morphea types: plaque, generalized, bullous, linear and deep. Whether each of these distinct types has a particular clinical course or is associated with some patient-related features is still unclear. We report here a retrospective series of patients with localized scleroderma with an attempt to identify features related to the type of lesion involved. The medical records of all patients with a diagnosis of localized scleroderma were reviewed by skilled practitioners. Lesions were classified according to the Mayo Clinic Classification. The relationship between each lesion type and various clinical features was tested by non-parametrical methods. The sample of 52 patients included 43 females and 9 males. Median age at onset was 30 y (range 1-76). Frequencies of patients according to morphea types were: plaque morphea 41 (78.8%) (including morphea en plaque 30 (57.7%) and atrophoderma of Pasini-Pierini 11 (21.1%)), linear scleroderma 14 (26.9%). Nine patients (17.3%) had both types of localized scleroderma. Median age at onset was lower in patients with linear scleroderma (8 y (range 3-44)) than in others (36 y (range 1-77)) (p=0.0003). Head involvement was more common in patients with linear scleroderma (37.5%) than in other subtypes (11.1%) (p=0.05). Atrophoderma of Pasini-Pierini was never located at the head. Systemic symptoms, antinuclear antibodies and the rheumatic factor were not associated with localized scleroderma types or subtypes. These results suggest that morphea types, in adults are not associated with distinct patient features except for age at disease onset (lower) and the localization on the head (more frequent), in patients with lesions of the linear type.

Is late-onset OCD a distinct phenotype? Findings from a comparative analysis of "age at onset" groups.

Science.gov (United States)

Sharma, Eesha; Sundar, A Shyam; Thennarasu, Kandavel; Reddy, Y C Janardhan

2015-10-01

Significant differences in clinical profile and comorbidity patterns have been observed between "juvenile-onset" and "adult-onset" obsessive-compulsive disorder (OCD). There is little systematic research on onset of OCD after the fourth decade. The current study aims to compare the demographic, clinical, and comorbidity patterns of patients with "juvenile-onset" (OCD. Eight hundred two consecutive patients who consulted a specialty OCD clinic at a tertiary care hospital in India were evaluated with the Mini International Neuropsychiatric Interview, the Yale-Brown Obsessive-Compulsive Scale, and the Clinical Global Impression scale. 37.4%, 57.4%, and 5.2% of patients had juvenile-, adult-, and late-onset OCD, respectively. Late-onset OCD was associated with female gender (χ2=42, pOCD in first-degree relatives (χ2=20.4, pOCD was significantly associated with female gender, collecting compulsions, and less aggressive obsessions, in comparison with adult-onset OCD. In comparison with juvenile-onset, late-onset OCD was significantly associated with female gender, presence of precipitating factors, and less aggressive obsessions, sexual obsessions, and repeating compulsions. Late-onset OCD is characterized by female gender, lesser familial loading for OCD, and presence of precipitating factors, suggesting that it may have a distinct pathophysiology compared to juvenile- and adult-onset OCD. Systematic research is required to understand the family-genetic, neuropsychological, and neurobiological correlates of late-onset OCD.

Puberty Onset among Boys in Riyadh, Saudi Arabia

Directory of Open Access Journals (Sweden)

Ibrahim Al Alwan

2010-01-01

Full Text Available Background The ages of onset of pubertal characteristics are influenced by genetic, geographic, dietary and socioeconomic factors; however, due to lack of country-specific norms, clinicians in Saudi Arabia use Western estimates as standards of reference for local children. Aims The aim of the Riyadh Puberty Study was to provide data on pubertal development to determine the average age of onset of pubertal characteristics among Saudi boys. Methods Cross-sectional study among male school children in Riyadh, Saudi Arabia, in 2006, 542 schoolboys, aged 6 to 16 years old, from diverse socioeconomic levels were selected into the sample using a cluster sample design. Tanner stages were ascertained during physical examination by pediatric endocrine consultants, and also trained pediatric residents and fellows. Results The mean age (standard deviation at Tanner Stages 2, 3, 4, and 5 for pubic hair development of Saudi boys was 11.4 (1.6, 13.3 (1.3, 14.4 (1.0 and 15.1 (0.8 years old, respectively. For gonadal development, the mean age (standard deviation at stages 2, 3, 4, and 5 were 11.4 (1.5, 13.3 (1.2, 14.3 (1.1 and 15.0 (0.9 years old, respectively. Conclusion The ages of onset of pubertal characteristics, based on gonadal development, among Saudi boys are comparable to those reported in Western populations.

The effect of cerium-based conversion treatment on the cathodic delamination and corrosion protection performance of carbon steel-fusion-bonded epoxy coating systems

Energy Technology Data Exchange (ETDEWEB)

Ramezanzadeh, B., E-mail: ramezanzadeh@aut.ac.ir [Department of Surface Coatings and Corrosion, Institute for Color Science and Technology (ICST), 16765-654, Tehran (Iran, Islamic Republic of); Rostami, M. [Department of Nanomaterials and Nanocoatings, Institute for Color Science and Technology (ICST), 16765-654, Tehran (Iran, Islamic Republic of)

2017-01-15

Highlights: • Steel surface was treated by Ce and acid phosphoric solutions. • Ce treatment considerably enhanced the surface energy and produce nanoscale roughness. • Ce treated samples showed enhanced adhesion to FBE coating. • Ce treatment of steel significantly reduced the FBE cathodic delamination rate. • Ce treated sample showed enhanced corrosion resistance. - Abstract: The effect of surface pre-treatment of pipe surface by green cerium compound and phosphoric acid solution on the fusion-bonded epoxy (FBE) coating performance was studied. The composition and surface morphology of the steel samples treated by acid and Ce solutions were characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), equipped with energy dispersive spectroscopy (EDS). Also, the surface free energy was evaluated on these samples through contact angle measurements. In addition, the effect of Ce and acid washing procedures on the adhesion properties and corrosion protection performance of the FBE was examined by pull-off, salt spray and electrochemical impedance spectroscopy (EIS) tests. Results showed that compared to acid washing, the chemical treatment by Ce solution noticeably increased the surface free energy of steel, improved the adhesion properties of FBE, decreased the cathodic delamination rate of FBE, and enhanced the coating corrosion resistance compared to the acid washed samples.

``The Princess and the Pea'' at the Nanoscale: Wrinkling and Delamination of Graphene on Nanoparticles

Science.gov (United States)

Yamamoto, Mahito; Pierre-Louis, Olivier; Huang, Jia; Fuhrer, Michael S.; Einstein, Theodore L.; Cullen, William G.

2012-10-01

Thin membranes exhibit complex responses to external forces or geometrical constraints. A familiar example is the wrinkling, exhibited by human skin, plant leaves, and fabrics, that results from the relative ease of bending versus stretching. Here, we study the wrinkling of graphene, the thinnest and stiffest known membrane, deposited on a silica substrate decorated with silica nanoparticles. At small nanoparticle density, monolayer graphene adheres to the substrate, detached only in small regions around the nanoparticles. With increasing nanoparticle density, we observe the formation of wrinkles which connect nanoparticles. Above a critical nanoparticle density, the wrinkles form a percolating network through the sample. As the graphene membrane is made thicker, global delamination from the substrate is observed. The observations can be well understood within a continuum-elastic model and have important implications for strain-engineering the electronic properties of graphene.

Age at onset of DSM-IV pathological gambling in a non-treatment sample: Early- versus later-onset.

Science.gov (United States)

Black, Donald W; Shaw, Martha; Coryell, William; Crowe, Raymond; McCormick, Brett; Allen, Jeff

2015-07-01

Pathological gambling (PG) is a prevalent and impairing public health problem. In this study we assessed age at onset in men and women with PG and compared the demographic and clinical picture of early- vs. later-onset individuals. We also compared age at onset in PG subjects and their first-degree relatives with PG. Subjects with DSM-IV PG were recruited during the conduct of two non-treatment clinical studies. Subjects were evaluated with structured interviews and validated questionnaires. Early-onset was defined as PG starting prior to age 33years. Age at onset of PG in the 255 subjects ranged from 8 to 80years with a mean (SD) of 34.0 (15.3) years. Men had an earlier onset than women. 84% of all subjects with PG had developed the disorder by age 50years. Early-onset subjects were more likely to be male, to prefer action games, and to have substance use disorders, antisocial personality disorder, attention deficit/hyperactivity disorder, trait impulsiveness, and social anxiety disorder. Later-onset was more common in women and was associated with a preference for slots and a history of sexual abuse. Age at onset of PG is bimodal and differs for men and women. Early-onset PG and later-onset PG have important demographic and clinical differences. The implications of the findings are discussed. Copyright © 2015 Elsevier Inc. All rights reserved.

Theory of Mind differences in older patients with early-onset and late-onset paranoid schizophrenia.

Science.gov (United States)

Smeets-Janssen, M M J; Meesters, P D; Comijs, H C; Eikelenboom, P; Smit, J H; de Haan, L; Beekman, A T F; Stek, M L

2013-11-01

Theory of Mind (ToM) is considered an essential element of social cognition. In younger schizophrenia patients, ToM impairments have extensively been demonstrated. It is not clear whether similar impairments can be found in older schizophrenia patients and if these impairments differ between older patients with early-onset and late-onset schizophrenia. Theory of Mind abilities were assessed using the Hinting Task in 15 older patients (age 60 years and older) with early-onset paranoid schizophrenia, 15 older patients with late-onset paranoid schizophrenia and 30 healthy controls. ANCOVA was performed to test differences between groups. Analyses were adjusted for level of education. Effect sizes, partial eta squared (ε(2) ), were computed as an indication of the clinical relevance of the findings. Patients with early-onset schizophrenia scored significantly lower on the Hinting Task (mean 16.1; SD 4.3) compared with patients with late-onset schizophrenia (mean 18.6; SD 1.5) and with healthy controls (mean 19.0; SD 1.4). The effect size of this difference was large (ε(2)  = 0.2). These results suggest that ToM functioning may be a protective factor modulating the age at onset of psychosis. Further studies into the relationship between social cognition and onset age of psychosis are warranted. Copyright © 2013 John Wiley & Sons, Ltd.

Onset Symptoms, Tobacco Smoking, and Progressive-Onset Phenotype Are Associated With a Delayed Onset of Multiple Sclerosis, and Marijuana Use With an Earlier Onset

Directory of Open Access Journals (Sweden)

Chunrong Tao

2018-06-01

Full Text Available Background: Age at symptom onset (ASO is a prognostic factor that could affect the accrual of disability in multiple sclerosis (MS patients. Some factors are known to influence the risk of multiple sclerosis (MS, but their influence on the ASO is less well-investigated.Objective: Examine the associations between known or emerging MS risk factors and ASO.Methods: This was a multicenter study, incident cases (n = 279 with first clinical diagnosis of demyelinating event aged 18–59 years recruited at four Australian centres (latitudes 27°-43°S, from 1 November 2003 to 31 December 2006. Environmental/behavioral variables and initial symptoms were recorded at baseline interview. Linear regression was used to assess the association between risk factors and ASO.Results: Five factors were significantly associated with ASO: a history of tobacco smoking was associated with 3.05-years later ASO (p = 0.002; a history of marijuana use was associated with 6.03-years earlier ASO (p < 0.001; progressive-onset cases had 5.61-years later ASO (p = 0.001; an initial presentation of bowel & bladder and cerebral dysfunctional were associated with 3.39 (p = 0.017 and 4.37-years (p = 0.006 later ASO, respectively. Other factors, including sex, offspring number, latitude of study site, history of infectious mononucleosis, HLA-DR15 & HLA-A2 genotype, 25(OHD levels, and ultraviolet radiation exposure were not associated with ASO. Including all five significant variables into one model explained 12% of the total variance in ASO.Conclusion: We found a novel association between a history of tobacco smoking and later onset, whereas marijuana use was associated with earlier onset. Behavioral factors seem important drivers of MS onset timing although much of the variance remains unexplained.

The onset of double diffusive convection in a viscoelastic fluid-saturated porous layer with non-equilibrium model.

Directory of Open Access Journals (Sweden)

Zhixin Yang

Full Text Available The onset of double diffusive convection in a viscoelastic fluid-saturated porous layer is studied when the fluid and solid phase are not in local thermal equilibrium. The modified Darcy model is used for the momentum equation and a two-field model is used for energy equation each representing the fluid and solid phases separately. The effect of thermal non-equilibrium on the onset of double diffusive convection is discussed. The critical Rayleigh number and the corresponding wave number for the exchange of stability and over-stability are obtained, and the onset criterion for stationary and oscillatory convection is derived analytically and discussed numerically.

AE analysis of delamination crack propagation in carbon fiber-reinforced polymer materials

Energy Technology Data Exchange (ETDEWEB)

Yoon, Sang Jae; Arakawa, Kazuo [Kyushu University, kasuga (Japan); Chen, Dingding [National University of Defense Technology, Changsha (China); Han, Seung Wook; Choi, Nak Sam [Hanyang University, Seoul (Korea, Republic of)

2015-01-15

Delamination fracture behavior was investigated using acoustic emission (AE) analysis on carbon fiber-reinforced polymer (CFRP) samples manufactured using vacuum-assisted resin transfer molding (VARTM). CFRP plate was fabricated using unidirectional carbon fiber fabric with a lay-up of six plies [+30/-30]6 , and a Teflon film was inserted as a starter crack. Test pieces were sectioned from the inlet and vent of the mold, and packed between two rectangular epoxy plates to load using a universal testing machine. The AE signals were monitored during tensile loading using two sensors. The average tensile load of the inlet specimens was slightly larger than that of the vent specimens; however, the data exhibited significant scattering due to non-uniform resin distribution, and there was no statistically significant different between the strength of the samples sectioned from the inlet or outlet of the mold. Each of the specimens exhibited similar AE characteristics, regardless of whether they were from the inlet or vent of the mold. Four kinds of damage mechanism were observed: micro-cracking, fiber-resin matrix debonding, fiber pull-out, and fiber failure; and three stages of the crack propagation process were identified.

Numerical Flexural Strength Analysis of Thermally Stressed Delaminated Composite Structure under Sinusoidal Loading

Science.gov (United States)

Hirwani, C. K.; Biswash, S.; Mehar, K.; Panda, S. K.

2018-03-01

In this article, we investigate the thermomechanical deflection characteristics of the debonded composite plate structure using an isoparametric type of higher-order finite element model. The current formulation is derived using higher-order kinematic theory and the displacement variables described as constant along the thickness direction whereas varying nonlinearly for the in-plane directions. The present mid-plane kinematic model mainly obsoletes the use of shear correction factor as in the other lower-order theories. The separation between the adjacent layers is modeled via the sub-laminate technique and the intermittent continuity conditions imposed to avoid the mathematical ill conditions. The governing equation of equilibrium of the damaged plate structure under the combined state of loading are obtained using the variational principle and solved numerically to compute the deflection values. Further, the convergence test has been performed by refining the numbers of elements and validated through comparing the present results with available published values. The usefulness of the proposed formulation has been discussed by solving the different kind of numerical examples including the size, location and position of delamination.

Late onset globoid cell leukodystrophy.

OpenAIRE

Grewal, R P; Petronas, N; Barton, N W

1991-01-01

A 29 year old male with onset of globoid cell leukodystrophy at age 14 is described. This is the first case of enzymatically confirmed globoid cell leukodystrophy with onset of symptoms after the age of ten. This patient is unique because of the late onset and slow progression and extends the clinical spectrum of globoid cell leukodystrophy.

Late onset globoid cell leukodystrophy.

Science.gov (United States)

Grewal, R P; Petronas, N; Barton, N W

1991-11-01

A 29 year old male with onset of globoid cell leukodystrophy at age 14 is described. This is the first case of enzymatically confirmed globoid cell leukodystrophy with onset of symptoms after the age of ten. This patient is unique because of the late onset and slow progression and extends the clinical spectrum of globoid cell leukodystrophy.

Fentanyl supplement expedites the onset time of sensory and motor blocking in interscalene lidocaine anesthesia

Directory of Open Access Journals (Sweden)

RS Moharari

2010-12-01

Full Text Available Background and the purpose of the study: Opioids are usually used in regional anesthesia, with or without local anesthetics to improve the regional block or postoperative pain control. Since no data are available on fentanyl's effect on the onset time of lidocaine interscalene anesthesia, the purpose of this study was to examine its effect on the onset time of sensory and motor blockade during interscalene anesthesia.  Methods: In a prospective, randomized, double-blind study, ninety patients scheduled for elective shoulder, arm and forearm surgeries under an  interscalene brachial plexus block .They were randomly allocated to receive either 30 ml of  1.5 % lidocaine with 1.5 ml of isotonic saline  (control group, n = 39 or 30 ml of 1.5%  lidocaine with 1.5 ml (75µg of  fentanyl (fentanyl group,n=41. Then the onset time of sensory and motor blockades of the shoulder, arm and forearm were evaluated every 60 sec. The onset time of the sensory and motor blockades was defined as the time between the last injection and the total abolition of the pinprick response and complete paralysis. The duration of sensory blocks were considered as the time interval between the administration of the local anesthetic and the first postoperative pain sensation. Results: Ten patients were excluded because of unsuccessful blockade or unbearable pain during the surgery. The onset time of the sensory block was significantly faster in the fentanyl group (186.54± 62.71sec compared with the control group (289.51± 81.22, P < 0.01. The onset times of the motor block up to complete paralysis in forearm flexion was significantly faster in the fentanyl group (260.61± 119.91sec than the control group (367.08± 162.43sec, P < 0.01 There was no difference in the duration of the sensory block between two groups. Conclusion: Results of the study showed that the combination of 75 µg fentanyl and 1.5% lidocaine solution accelerated the onset of sensory and motor

Optimum Electrode Configurations for Two-Probe, Four-Probe and Multi-Probe Schemes in Electrical Resistance Tomography for Delamination Identification in Carbon Fiber Reinforced Composites

Directory of Open Access Journals (Sweden)

Luis Waldo Escalona-Galvis

2018-04-01

Full Text Available Internal damage in Carbon Fiber Reinforced Polymer (CFRP composites modifies the internal electrical conductivity of the composite material. Electrical Resistance Tomography (ERT is a non-destructive evaluation (NDE technique that determines the extent of damage based on electrical conductivity changes. Implementation of ERT for damage identification in CFRP composites requires the optimal selection of the sensing sites for accurate results. This selection depends on the measuring scheme used. The present work uses an effective independence (EI measure for selecting the minimum set of measurements for ERT damage identification using three measuring schemes: two-probe, four-probe and multi-probe. The electrical potential field in two CFRP laminate layups with 14 electrodes is calculated using finite element analyses (FEA for a set of specified delamination damage cases. The measuring schemes consider the cases of 14 electrodes distributed on both sides and seven electrodes on only one side of the laminate for each layup. The effectiveness of EI reduction is demonstrated by comparing the inverse identification results of delamination cases for the full and the reduced sets using the measuring schemes and electrode sets. This work shows that the EI measure optimally reduces electrode and electrode combinations in ERT based damage identification for different measuring schemes.

Controlling wear failure of graphite-like carbon film in aqueous environment: Two feasible approaches

International Nuclear Information System (INIS)

Wang Yongxin; Wang Liping; Xue Qunji

2011-01-01

Friction and wear behaviors of graphite-like carbon (GLC) films in aqueous environment were investigated by a reciprocating sliding tribo-meter with ball-on-disc contact. Film structures and wear scars were studied by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS) and a non-contact 3D surface profiler. A comprehensive wear model of the GLC film in aqueous environment was established, and two feasible approaches to control critical factor to the corresponding wear failure were discussed. Results showed that wear loss of GLC films in aqueous environment was characterized by micro-plough and local delamination. Due to the significant material loss, local delamination of films was critical to wear failure of GLC film in aqueous environment if the film was not prepared properly. The initiation and propagation of micro-cracks within whole films closely related to the occurrence of the films delamination from the interface between interlayer and substrate. The increase of film density by adjusting the deposition condition would significantly reduce the film delamination from substrate, meanwhile, fabricating a proper interlayer between substrate and GLC films to prevent the penetration of water molecules into the interface between interlayer and substrate could effectively eliminate the delamination.

Pediatric-Onset and Adult-Onset Separation Anxiety Disorder Across Countries in the World Mental Health Survey

Science.gov (United States)

Silove, Derrick; Alonso, Jordi; Bromet, Evelyn; Gruber, Mike; Sampson, Nancy; Scott, Kate; Andrade, Laura; Benjet, Corina; de Almeida, Jose Miguel Caldas; De Girolamo, Giovanni; de Jonge, Peter; Demyttenaere, Koen; Fiestas, Fabian; Florescu, Silvia; Gureje, Oye; He, Yanling; Karam, Elie; Lepine, Jean-Pierre; Murphy, Sam; Villa-Posada, Jose; Zarkov, Zahari; Kessler, Ronald C.

2016-01-01

Objective The age-at-onset criterion for separation anxiety disorder was removed in DSM-5, making it timely to examine the epidemiology of separation anxiety disorder as a disorder with onsets spanning the life course, using cross-country data. Method The sample included 38,993 adults in 18 countries in the World Health Organization (WHO) World Mental Health Surveys. The WHO Composite International Diagnostic Interview was used to assess a range of DSM-IV disorders that included an expanded definition of separation anxiety disorder allowing onsets in adulthood. Analyses focused on prevalence, age at onset, comorbidity, predictors of onset and persistence, and separation anxiety-related role impairment. Results Lifetime separation anxiety disorder prevalence averaged 4.8% across countries (interquartile range [25th–75th percentiles]=1.4%–6.4%), with 43.1% of lifetime onsets occurring after age 18. Significant time-lagged associations were found between earlier separation anxiety disorder and subsequent onset of internalizing and externalizing DSM-IV disorders and conversely between these disorders and subsequent onset of separation anxiety disorder. Other consistently significant predictors of lifetime separation anxiety disorder included female gender, retrospectively reported childhood adversities, and lifetime traumatic events. These predictors were largely comparable for separation anxiety disorder onsets in childhood, adolescence, and adulthood and across country income groups. Twelve-month separation anxiety disorder prevalence was considerably lower than lifetime prevalence (1.0% of the total sample; interquartile range=0.2%–1.2%). Severe separation anxiety-related 12-month role impairment was significantly more common in the presence (42.4%) than absence (18.3%) of 12-month comorbidity. Conclusions Separation anxiety disorder is a common and highly comorbid disorder that can have onset across the lifespan. Childhood adversity and lifetime trauma are

Effect of stitch density on fatigue characteristics and damage mechanisms of stitched carbon/epoxy composites

KAUST Repository

Yudhanto, Arief

2014-05-01

The effect of stitch density (SD) on fatigue life, stiffness degradation and fatigue damage mechanisms in carbon/epoxy (T800SC/XNRH6813) stitched using Vectran thread is presented in this paper. Moderately stitched composite (SD = 0.028/mm2; \\'stitched 6 × 6\\') and densely stitched composite (SD = 0.111/mm2; \\'stitched 3 × 3\\') are tested and compared with composite without stitch thread (SD = 0.0; \\'unstitched\\'). The experiments show that the fatigue life of stitched 3 × 3 is moderately better than that of unstitched and stitched 6 × 6. Stitched 3 × 3 pattern is also able to postpone the stiffness degradation onset. The improvement of fatigue properties and postponement of stiffness degradation onset in stitched 3 × 3 is primarily due to an effective impediment of edge-delamination. Quantification of damage at various cycles and stress levels shows that stitch density primarily affects the growth rate of delamination. © 2014 Elsevier Ltd. All rights reserved.

Temporal relationship between onset of Graves' ophthalmopathy and onset of thyroidal Graves' disease

NARCIS (Netherlands)

Wiersinga, W. M.; Smit, T.; van der Gaag, R.; Koornneef, L.

1988-01-01

The temporal relationship between the onset of Graves' ophthalmopathy and the onset of thyroidal Graves' disease was evaluated in 125 consecutive patients with Graves' ophthalmopathy. Thyroidal Graves' disease--past or present--was clinically evident in 99 patients (79%): hyperthyroidism in 3 cases.

Late-onset Huntington's disease: diagnostic and prognostic considerations.

Science.gov (United States)

Koutsis, Georgios; Karadima, Georgia; Kladi, Athina; Panas, Marios

2014-07-01

To address diagnostic and prognostic issues in patients with late-onset Huntington's disease (HD). We analyzed a cohort of 41 late-onset (≥60 years) HD patients and compared them to 39 late-onset patients referred for HD testing that were negative for the HD-expansion and to 290 usual-onset (20-59 years) HD patients. Disease severity was assessed by the Total Functional Capacity Scale. Late-onset HD comprised 11.5% of our HD cohort. In total, 70.7% of late-onset HD patients had positive family history compared to 15.4% of late-onset expansion-negative patients (p < 0.001). Clinical features at onset or presentation could not usefully distinguish between late-onset expansion-positive and negative patients, excepting hemichorea, which was absent from the HD group (p = 0.024). Chorea was the first clinical feature in 53.7% and a presenting feature in 90.2% of late-onset HD. The mutation hit rate for late-onset patients was 51.3%, lower than in usual-onset patients (p = 0.04). Frequencies of chorea, cognitive impairment and psychiatric manifestations at onset or presentation were not significantly different between late-onset and usual-onset HD patients. Gait unsteadiness however was more common at presentation in late-onset HD (p = 0.007). Late-onset HD patients reached a severe stage of illness on average 2.8 years earlier than usual-onset HD patients (p = 0.046). A positive family history suggestive of HD, although absent in a third of patients, remains a helpful clue in diagnosing late-onset HD. Prognosis of late-onset HD in terms of Total Functional Capacity appears no better and shows a trend of being somewhat less favorable compared to usual-onset HD. Copyright © 2014 Elsevier Ltd. All rights reserved.

“The Princess and the Pea” at the Nanoscale: Wrinkling and Delamination of Graphene on Nanoparticles

Directory of Open Access Journals (Sweden)

Mahito Yamamoto

2012-12-01

Full Text Available Thin membranes exhibit complex responses to external forces or geometrical constraints. A familiar example is the wrinkling, exhibited by human skin, plant leaves, and fabrics, that results from the relative ease of bending versus stretching. Here, we study the wrinkling of graphene, the thinnest and stiffest known membrane, deposited on a silica substrate decorated with silica nanoparticles. At small nanoparticle density, monolayer graphene adheres to the substrate, detached only in small regions around the nanoparticles. With increasing nanoparticle density, we observe the formation of wrinkles which connect nanoparticles. Above a critical nanoparticle density, the wrinkles form a percolating network through the sample. As the graphene membrane is made thicker, global delamination from the substrate is observed. The observations can be well understood within a continuum-elastic model and have important implications for strain-engineering the electronic properties of graphene.

Ultrasonic signal analysis according to laser ultrasound generation position for the detection of delamination in composites

Energy Technology Data Exchange (ETDEWEB)

Hong, Kyung Min; Choi In Young; Kim, Seong Jong; Kang, Young June [Chonbuk National University, Jeonju (Korea, Republic of); Lee, Gil Dong [GP Inc., Daejeon (Korea, Republic of)

2015-11-15

Carbon-fiber-reinforced plastic should be inspected in the fabrication process to enhance quality by preventing defects, such as delamination and voids. Conventional ultrasonic evaluation methods cannot be applied during the fabrication process because they require contact measurement by a transducer. Thus, an optical method using a laser was employed in this study for non-contact ultrasonic evaluation. Ultrasonic signals were generated by a pulsed laser and received by using a laser interferometer. First, an ultrasonic signal was generated from the back side of a material sample with artificial internal defects in the composite. The ultrasonic signal directed through the interior of the specimen was then detected at the front side. After determining the locations of the internal defects, the defects were quantitatively evaluated from the front side of the composite by using ultrasonic signal generation and reception.

Effect of delaminations on improvement of notch toughness at low temperatures

International Nuclear Information System (INIS)

Zhou, W.; Loh, N.L.

1996-01-01

The notched-bar impact test is often used to assess the notch toughness of engineering materials. The principle of the test is that a material absorbs a certain amount of energy when it breaks; the energy thus absorbed is an indication of the material's resistance to impact fracture. If the material is brittle, it breaks easily with a small amount of absorbed energy. If it is tough, it will absorb more energy to fracture. It has been well recognized that most engineering materials undergo a transition from notch tough to notch brittle behavior when the temperature is reduced. In the present study, however, an abnormal trend in the transition behavior was found for an austenitic stainless steel. V-notched specimens of the steel were tested under impact loading in a wide temperature range from -196 C to room temperature. Contrary to expectation, the impact energy values obtained at low temperatures were found to be much higher than those obtained at room temperature, indicating that the steel became tougher rather than more brittle when the test temperature was lowered. This intriguing phenomenon cannot be explained simply according to the tensile stress fracture criterion. Strong evidence has been obtained in the present study to show that the improvement of notch toughness at low temperatures is caused by delaminations

Spatial analysis of community-onset Staphylococcus aureus bacteremia in Queensland, Australia.

Science.gov (United States)

Marquess, John; Hu, Wenbiao; Nimmo, Graeme R; Clements, Archie C A

2013-03-01

To investigate and describe the relationship between indigenous Australian populations, residential aged care services, and community-onset Staphylococcus aureus bacteremia (SAB) among patients admitted to public hospitals in Queensland, Australia. Ecological study. We used administrative healthcare data linked to microbiology results from patients with SAB admitted to Queensland public hospitals from 2005 through 2010 to identify community-onset infections. Data about indigenous Australian population and residential aged care services at the local government area level were obtained from the Queensland Office of Economic and Statistical Research. Associations between community-onset SAB and indigenous Australian population and residential aged care services were calculated using Poisson regression models in a Bayesian framework. Choropleth maps were used to describe the spatial patterns of SAB risk. We observed a 21% increase in relative risk (RR) of bacteremia with methicillin-susceptible S. aureus (MSSA; RR, 1.21 [95% credible interval, 1.15-1.26]) and a 24% increase in RR with nonmultiresistant methicillin-resistant S. aureus (nmMRSA; RR, 1.24 [95% credible interval, 1.13-1.34]) with a 10% increase in the indigenous Australian population proportion. There was no significant association between RR of SAB and the number of residential aged care services. Areas with the highest RR for nmMRSA and MSSA bacteremia were identified in the northern and western regions of Queensland. The RR of community-onset SAB varied spatially across Queensland. There was increased RR of community-onset SAB with nmMRSA and MSSA in areas of Queensland with increased indigenous population proportions. Additional research should be undertaken to understand other factors that increase the risk of infection due to this organism.

[Early-onset and late-onset male hypogonadotropic hypogonadism and osteoporosis].

Science.gov (United States)

Okada, Hiroshi; Shin, Takeshi; Kobori, Yoshitomo

2016-07-01

Hypogonadism is classified into two major clinical entities, namely early-onset hypogonadism and late-onset hypogonadism. The former is characterized by the malfunction of hypothalamo-pituitary-gonadal(testicular)axis or by the primary hypofunction of testes(e.g. Klinefelter's syndrome). The latter is summarized as LOH syndrome which is attributed to the dropped level of bioavailable testosterone. In these diseases testosterone is the key molecule which may cause various symptoms relating not only to physical health but also to mental or psychologic health. In this review issues concerning bone health in these disease are described.

Quantitative 3D X-ray imaging of densification, delamination and fracture in a micro-composite under compression

DEFF Research Database (Denmark)

Bø Fløystad, Jostein; Skjønsfjell, Eirik Torbjørn Bakken; Guizar-Sicairos, Manuel

2015-01-01

Phase-contrast three-dimensional tomograms showing in unprecedented detail the mechanical response of a micro-composite subjected to a mechanical compression test are reported. The X-ray ptychography images reveal the deformation and fracture processes of a 10 μm diameter composite, consisting...... X-ray microscopy as a powerful tool for in situ studies of the mechanical properties of nanostructured devices, structures, and composites. Ptychographic X-ray microscopy can be used for quantitatively studying the mechanical properties of microscale composites. Phase-contrast three...... of a spherical polymer bead coated with a nominally 210 nm metal shell. The beginning delamination of the shell from the core can be directly observed at an engineering strain of a few percent. Pre-existing defects are shown to dictate the deformation behavior of both core and shell. The strain state...

Blockage-induced condensation controlled by a local reaction

Science.gov (United States)

Cirillo, Emilio N. M.; Colangeli, Matteo; Muntean, Adrian

2016-10-01

We consider the setup of stationary zero range models and discuss the onset of condensation induced by a local blockage on the lattice. We show that the introduction of a local feedback on the hopping rates allows us to control the particle fraction in the condensed phase. This phenomenon results in a current versus blockage parameter curve characterized by two nonanalyticity points.

Late Miocene extensional systems in northern Tunisia and their relation with SE directed delamination of the African subcontinental mantle lithosphere

Science.gov (United States)

Booth-Rea, Guillermo; Gaidi, Seif; Melki, Fetheddine; Pérez-Peña, Vicente; Marzougui, Wissem; Azañón, Jose Miguel; Galve, Jorge Pedro

2017-04-01

Recent work has proposed the delamination of the subcontinental mantle lithosphere under northern Tunisia during the late Miocene. This process is required to explain the present location of the Tunisian segment of the African slab, imaged by seismic tomography, hanging under the Gulf of Gabes to the south of Tunisia. Thus, having retreated towards the SE several hundred km from its original position under the Tellian-Atlas nappe contact that crops out along the north of Tunisia. However, no tectonic structures have been described which could be related to this mechanism of lithospheric mantle peeling. Here we describe for the first time extensional fault systems in northern Tunisia that strongly thinned the Tellian nappes, exhuming rocks from the Tunisian Atlas in the core of folded extensional detachments. Two normal fault systems with sub-orthogonal extensional transport occur. These were active during the late Miocene associated to the extrusion of 13 Ma granodiorite and 9 Ma rhyodacite in the footwall of the Nefza detachment. We have differentiated an extensional system formed by low-angle normal faults with NE- and SW-directed transport cutting through the Early to Middle Miocene Tellian nappen stack and a later system of low and high-angle normal faults that cuts down into the underlying Tunisian Atlas units with SE-directed transport, which root in the Nefza detachment. Both normal fault systems have been later folded and cut by thrusts during Plio-Quaternary NW-SE directed compression. These findings change the interpretation of the tectonic evolution of Tunisia that has always been framed in a transpressive to compressive setting, manifesting the extensional effects of Late Miocene lithospheric mantle delamination under northern Tunisia.

Nonparametric modeling and analysis of association between Huntington's disease onset and CAG repeats.

Science.gov (United States)

Ma, Yanyuan; Wang, Yuanjia

2014-04-15

Huntington's disease (HD) is a neurodegenerative disorder with a dominant genetic mode of inheritance caused by an expansion of CAG repeats on chromosome 4. Typically, a longer sequence of CAG repeat length is associated with increased risk of experiencing earlier onset of HD. Previous studies of the association between HD onset age and CAG length have favored a logistic model, where the CAG repeat length enters the mean and variance components of the logistic model in a complex exponential-linear form. To relax the parametric assumption of the exponential-linear association to the true HD onset distribution, we propose to leave both mean and variance functions of the CAG repeat length unspecified and perform semiparametric estimation in this context through a local kernel and backfitting procedure. Motivated by including family history of HD information available in the family members of participants in the Cooperative Huntington's Observational Research Trial (COHORT), we develop the methodology in the context of mixture data, where some subjects have a positive probability of being risk free. We also allow censoring on the age at onset of disease and accommodate covariates other than the CAG length. We study the theoretical properties of the proposed estimator and derive its asymptotic distribution. Finally, we apply the proposed methods to the COHORT data to estimate the HD onset distribution using a group of study participants and the disease family history information available on their family members. Copyright © 2013 John Wiley & Sons, Ltd.

Onset of Darrieus-Landau Instability in Expanding Flames

Science.gov (United States)

Mohan, Shikhar; Matalon, Moshe

2017-11-01

The effect of small amplitude perturbations on the propagation of circular flames in unconfined domains is investigated, computationally and analytically, within the context of the hydrodynamic theory. The flame, treated as a surface of density discontinuity separating fresh combustible mixture from the burnt gas, propagates at a speed dependent upon local curvature and hydrodynamic strain. For mixtures with Lewis numbers above criticality, thermodiffusive effects have stabilizing influences which largely affect the flame at small radii. The amplitude of these disturbances initially decay and only begin to grow once a critical radius is reached. This instability is hydrodynamic in nature and is a consequence of thermal expansion. Through linear stability analysis, predictions of critical flame radius at the onset of instability are obtained as functions of Markstein length and thermal expansion coefficients. The flame evolution is also examined numerically where the motion of the interface is tracked via a level-set method. Consistent with linear stability results, simulations show the flame initially remaining stable and the existence of a particular mode that will be first to grow and later determine the cellular structure observed experimentally at the onset of instability.

Assessment of Composite Delamination Self-Healing Via Micro-Encapsulation

Science.gov (United States)

O'Brien, T. Kevin; White, Scott R.

2008-01-01

Composite skin/stringer flange debond specimens manufactured from composite prepreg containing interleaf layers with a polymer based healing agent encapsulated in thin walled spheres were tested. As a crack develops and grows in the base polymer, the spheres fracture releasing the healing agent. The agent reacts with catalyst and polymerizes healing the crack. In addition, through-thickness reinforcement, in the form of pultruded carbon z-pins were included near the flange tips to improve the resistance to debonding. Specimens were manufactured with 14 plies in the skin and 10 plies in the stiffener flange. Three-point bend tests were performed to measure the skin/stiffener debonding strength and the recovered strength after healing. The first three tests performed indicated no healing following unloading and reloading. Micrographs showed that delaminations could migrate to the top of the interleaf layer due to the asymmetric loading, and hence, bypass most of the embedded capsules. For two subsequent tests, specimens were clamped in reverse bending before reloading. In one case, healing was observed as evidenced by healing agent that leaked to the specimen edge forming a visible "scar". The residual strength measured upon reloading was 96% of the original strength indicating healing had occurred. Hence, self-healing is possible in fiber reinforced composite material under controlled conditions, i.e., given enough time and contact with pressure on the crack surfaces. The micro-encapsulation technique may prove more robust when capsule sizes can be produced that are small enough to be embedded in the matrix resin without the need for using an interleaf layer. However, in either configuration, the amount of healing that can occur may be limited to the volume of healing agent available relative to the crack volume that must be filled.

Association between age at onset of psychosis and age at onset of cannabis use in non-affective psychosis.

Science.gov (United States)

Galvez-Buccollini, Juan A; Proal, Ashley C; Tomaselli, Veronica; Trachtenberg, Melissa; Coconcea, Cristinel; Chun, Jinsoo; Manschreck, Theo; Fleming, Jerry; Delisi, Lynn E

2012-08-01

Several studies have associated cannabis use with the development of schizophrenia. However, it has been difficult to disentangle the effects of cannabis from that of other illicit drugs, as previous studies have not evaluated pure cannabis users. To test whether the onset of cannabis use had an effect on the initiation of psychosis, we examined the time relationship between onset of use and onset of psychosis, restricting our analysis to a cohort of individuals who only used cannabis and no other street drugs. Fifty-seven subjects with non-affective psychoses who used cannabis prior to developing a psychosis were interviewed using the Diagnostic Interview for Genetic Studies (DIGS). The Family Interview for Genetic Studies (FIGS) was also used to interview a family informant about psychiatric illness in the patient and the entire family. Multiple linear regression techniques were used to estimate the association between variables. After adjusting for potential confounding factors such as sex, age, lifetime diagnosis of alcohol abuse or dependence, and family history of schizophrenia, the age at onset of cannabis was significantly associated with age at onset of psychosis (β=0.4, 95% CI=0.1-0.7, p=0.004) and age at first hospitalization (β=0.4, 95% CI=0.1-0.8, p=0.008). The mean time between beginning to use cannabis and onset of psychosis was 7.0±4.3. Age at onset of alcohol use was not associated with age at onset of psychosis or age at first hospitalization. Age at onset of cannabis is directly associated with age at onset of psychosis and age at first hospitalization. These associations remain significant after adjusting for potential confounding factors and are consistent with the hypothesis that cannabis could cause or precipitate the onset of psychosis after a prolonged period of time. Published by Elsevier B.V.

Body height and weight of patients with childhood onset and adult onset thyrotoxicosis.

Science.gov (United States)

Takamatsu, J; Kobe, N; Ito, M; Ohsawa, N

1999-03-01

The present study has compared body height and weight of thyrotoxic female patients of childhood onset and adult onset. The body height of 141 out of 143 (99%) adult-onset thyrotoxic patients was within the range of mean +/- 2SD for the age-matched general Japanese female population. On the other hand, in 42 patients with childhood-onset thyrotoxicosis, 6 (14%) had their height being greater than the mean + 2SD of general population, and 34 (81%) were taller than the mean value. In 86 patients with siblings, 42 (49%) were at least 2 cm taller than their sisters, and 26 (30%) were more than 2 cm shorter than their sisters. The body weight of 27 out of 42 (68%) patients younger than 20 years was not decreased but was even greater than the mean value for the age-matched general population. The results indicate that excessive thyroid hormone in vivo enhances body height in humans. The increased body weight in some young patients suggests that enhanced dietary intake due to increased appetite in hyperthyroidism has overcome the energy loss with increased metabolism.

Circadian Variation Of Stroke Onset

Directory of Open Access Journals (Sweden)

Kamath vasantha

2003-01-01

Full Text Available Diurnal variations in various physiological and biochemical functions and certain pathological events like myocardial infarction and stroke have been documented. We studied prospectively one hundred and seven patients of acute onset stroke confirmed by computed tomography for the exact time of onset, risk factors and type of stroke. Patients who were unclear of time of onset and with a diagnosis of cerebral venous thrombosis or sub-arachnoid hemorrhage were excluded. Infarction was detected in 71 patients and hemorrhage in 33 patients. Men out numbered women (1:6:1. Hypertension was more frequent in hemorrhage in the morning time (5 AM-12 noon and more infarction between 12-6 pm. However there was no relation between the time of onset of stroke and various risk-factors of stroke.

Layered rare-earth hydroxide (LRH, R = Tb, Y) composites with fluorescein: delamination, tunable luminescence and application in chemosensoring for detecting Fe(iii) ions.

Science.gov (United States)

Su, Feifei; Guo, Rong; Yu, Zihuan; Li, Jian; Liang, Zupei; Shi, Keren; Ma, Shulan; Sun, Genban; Li, Huifeng

2018-04-17

We demonstrate a novel example of tunable luminescence and the application of the delaminated FLN/OS-LRH composites (LRHs are layered rare-earth hydroxides, R = Tb, Y; FLN is the fluorescein named 2-(6-hydroxy-3-oxo-(3H)-xanthen-9-yl)benzoic acid; OS is the anionic surfactant 1-octane sulfonic acid sodium) in detecting Fe(iii) ions. The FLNxOS1-x species (x = 0.02, 0.05, 0.10, and 0.20) are intercalated into the LTbyY1-yH layers (y = 1, 0.9, 0.7, 0.5, 0.3, 0.1 and 0) by ion exchange reactions to yield the composites FLNxOS1-x-LTbyY1-yH. In the solid state, the LYH composites display green emission (564 nm) arising from the organic FLN, while in LTbH composites, the luminescence of the Tb3+ in the layers (545 nm) and the FLN in the interlayers is co-quenched. In the delaminated state in formamide (FM), FLNxOS1-x-LTbH composites display green to yellowish-green luminescence (540-574 nm) following the increasing FLN/OS ratio; while the FLN0.02OS0.98-LTbyY1-yH composites show green emission at ∼540 nm. The fluorescence lifetimes of the composites (4.22-4.63 ns) are comparable to the free FLN-Na, and the quantum yields (31.62-78.70%) of the composites especially that (78.70%) of the FLN0.02OS0.98-LYH are much higher than that (28.40%) of free FLN-Na. The recognition ability of the FLN0.02OS0.98-LYH composite for metal cations is researched. The delaminated FLN0.02OS0.98-LYH colloidal suspension exhibits high selectivity for Fe3+ over other ions (Mg2+, Al3+, Ni2+, Co2+, Cu2+, Zn2+, Mn2+, Pb2+, and Cd2+) with fluorescence quenching, which can work as a kind of turn-off fluorescence sensor for the detection of Fe3+. The detection limit of Fe3+ is determined to be 2.58 × 10-8 M and the quenching constant (Ksv) is 1.70 × 103 M-1. This is the first work on LRH materials working as a chemosensor for recognising metal cations. It provides a new approach for the design of LRH materials to be applied in fluorescence chemosensing.

Understanding Tobacco Use Onset Among African Americans.

Science.gov (United States)

Roberts, Megan E; Colby, Suzanne M; Lu, Bo; Ferketich, Amy K

2016-04-01

Compared to the majority of non-Hispanic white ("white") cigarette smokers, many African American smokers demonstrate a later age of initiation. The goal of the present study was to examine African American late-onset smoking (ie, regular smoking beginning at age 18 or later) and determine whether late-onset (vs. early-onset) smoking is protective in terms of quit rates and health outcomes. We used data from the National Survey of Midlife Development in the United States (MIDUS) because the wide age range of participants (20-75 at baseline) allowed the examination of smoking cessation and mortality incidence across the lifespan. Consistent with previous research, results indicated a later average age of smoking onset among African Americans, compared to whites. Disentangling effects of race from age-of-onset, we found that the cessation rate among late-onset African American smokers was 33%, whereas rates for early-onset African American smokers and early- and late-onset white smokers ranged from 52% to 57%. Finally, results showed that among white, low-socioeconomic status (SES) smokers, the hazard rate for mortality was greater among early- versus late-onset smokers; in contrast, among African American smokers (both low- and high-SES) hazard rates for mortality did not significantly differ among early- versus late-onset smokers. Although late (vs. early) smoking onset may be protective for whites, the present results suggest that late-onset may not be similarly protective for African Americans. Tobacco programs and regulatory policies focused on prevention should expand their perspective to include later ages of initiation, in order to avoid widening tobacco-related health disparities. This study indicates that late-onset smoking is not only the norm among African American adult smokers, but that late- versus early-onset smoking (ie, delaying onset) does not appear to afford any benefits for African Americans in terms of cessation or mortality. These results

SUDEP and other causes of mortality in childhood-onset epilepsy.

Science.gov (United States)

Sillanpää, Matti; Shinnar, Shlomo

2013-08-01

There are few prospective studies on the causes of mortality in well-characterized cohorts with epilepsy and even fewer that have autopsy data that allow for reliable determination of SUDEP. We report causes of mortality and mortality rates in the Finnish cohort with childhood-onset epilepsy. A population-based cohort of 245 children with epilepsy in 1964 has been prospectively followed for almost 40 years. Seizure outcomes and mortality were assessed. Autopsy data were available in 70% of the cases. Sudden unexpected death in epilepsy (SUDEP) rates were assessed, and SUDEP was confirmed by autopsy. During the follow-up, 60 subjects died. The major risk factor for mortality was lack of terminal remission (p epilepsy-related including SUDEP in 23/60 (38%) using the Nashef criteria, status epilepticus in 4/60 (7%), and accidental drowning in 6/60 (10%). The nonepilepsy-related deaths occurred primarily in the remote symptomatic group and were often related to the underlying disorder or to medical comorbidities that developed after the onset of the epilepsy. Risk factors for SUDEP on multivariable analysis included lack of 5-year terminal remission and not having a localization-related epilepsy. In cryptogenic/idiopathic cases, SUDEP did not occur in childhood but begins only in adolescence. Childhood-onset epilepsy is associated with a substantial risk of epilepsy-related mortality, primarily SUDEP. In otherwise neurologically normal individuals, the increased SUDEP risk begins in adolescence. The higher mortality rates reported in this cohort are related to duration of follow-up as most of the mortality occurs many years after the onset of the epilepsy. Copyright © 2013 Elsevier Inc. All rights reserved.

Measurements of fireball onset

Science.gov (United States)

Scheiner, Brett; Barnat, Edward V.; Baalrud, Scott D.; Hopkins, Matthew M.; Yee, Benjamin T.

2018-04-01

Laser-based measurements of the characteristic features of fireball onset and stabilization in response to a stepped voltage applied to an anode immersed in a low pressure (100 mTorr) helium afterglow are reported. These include spatial and temporal evolution of metastable species, electron density, and electric field magnitude as measured by planar laser induced fluorescence, laser-collision induced fluorescence, and laser-induced fluorescence-dip spectroscopy, respectively. These measurements are found to be in qualitative agreement with recent particle-in-cell simulations and theoretical models [Scheiner et al., Phys. Plasmas 24, 113520 (2017)]. The measurements validate the simulations and models in which fireball onset was predicted to follow from the trapping of electrons born from electron impact ionization within a potential well created by a buildup of ions in the sheath. The experimental measurements also demonstrate transient features following the onset that were not present in previous simulations. New simulation results are presented which demonstrate that these features are associated with the abruptness of the voltage step used to initiate fireball onset. An abrupt step in the anode bias causes rapid displacement of ions and an associated plasma potential response following the sheath and fireball expansion.

Crack phantoms: localized damage correlations and failure in network models of disordered materials

International Nuclear Information System (INIS)

Zaiser, M; Moretti, P; Lennartz-Sassinek, S

2015-01-01

We study the initiation of failure in network models of disordered materials such as random fuse and spring models, which serve as idealized representations of fracture processes in quasi-two-dimensional, disordered material systems. We consider two different geometries, namely rupture of thin sheets and delamination of thin films, and demonstrate that irrespective of geometry and implementation of the disorder (random failure thresholds versus dilution disorder) failure initiation is associated with the emergence of typical localized correlation structures in the damage patterns. These structures (‘crack phantoms’) exhibit well-defined characteristic lengths, which relate to the failure stress by scaling relations that are typical for critical crack nuclei in disorder-free materials. We discuss our findings in view of the fundamental nature of failure processes in materials with random microstructural heterogeneity. (paper)

Substorm onset location and dipole tilt angle

Directory of Open Access Journals (Sweden)

J. Wanliss

2006-03-01

Full Text Available From an initial data set of over 200 substorms we have studied a subset of 30 magnetospheric substorms close to magnetic midnight to investigate, in a statistical fashion, the source region of the auroral arc that brightens at the onset of expansive phase. This arc is usually identified as the ionospheric signature of the expansive phase onset that occurs in the magnetotail. All the substorm onsets were identified via ground-based magnetometer and photometer data from the CANOPUS array. Various Tsyganenko global magnetic field models were used to map magnetic field lines from the location of the onset arc out to its greatest radial distance in the magnetotail. The results appear to favour the current disruption model of substorms since the average onset location has an average of 14.1 Earth radii (RE and is therefore more consistent with theories that place the onset location in the inner magnetotail. For the narrow range of tilts available our modeling indicates the parameter that appears to strongly influence the location of the substorm onset is the dipole tilt angle; as tilt becomes less negative onsets occur further downtail.

Adult onset tic disorders

OpenAIRE

Chouinard, S.; Ford, B.

2000-01-01

BACKGROUND—Tic disorders presenting during adulthood have infrequently been described in the medical literature. Most reports depict adult onset secondary tic disorders caused by trauma, encephalitis, and other acquired conditions. Only rare reports describe idiopathic adult onset tic disorders, and most of these cases represent recurrent childhood tic disorders.
OBJECTIVE—To describe a large series of patients with tic disorders presenting during adulthood, to compare cl...

Brain hypermetabolism in amyotrophic lateral sclerosis: a FDG PET study in ALS of spinal and bulbar onset

International Nuclear Information System (INIS)

Cistaro, Angelina; Fania, Piercarlo; Consuelo Valentini, Maria; Carrara, Giovanna; Chio, Adriano; Calvo, Andrea; Moglia, Cristina; Montuschi, Anna; Nobili, Flavio; Morbelli, Silvia; Salmaso, Dario; Pagani, Marco

2012-01-01

To identify the neurobiological traits of amyotrophic lateral sclerosis (ALS) and to elucidate functional differences between ALS of spinal and bulbar onset. We hypothesized that glucose metabolism distribution might vary between groups. The study groups comprised 32 patients with ALS of either bulbar (n = 13) or spinal (n=19) onset and 22 subjects as controls. They were investigated by [ 18 F]fluorodeoxyglucose (FDG) positron emission tomography (FDG PET), comparing the patient groups with each other and with the controls by statistical parametric mapping. Highly significant relative increases in glucose metabolism distribution were found in the group comprising all 32 ALS patients as compared with the controls in the bilateral amygdalae, midbrain, pons and cerebellum. Relative hypermetabolism was also found in patients with spinal onset as compared with the controls in the right midbrain. In patients with bulbar onset compared with the controls and with patients with spinal onset, large relatively hypometabolic areas were found in the bilateral frontal cortex, right insula, anterior cingulate, precuneus and inferior parietal lobe. Patients with spinal onset had significantly higher scores in a neuropsychological test assessing verbal fluency compared with patients with bulbar onset. This large FDG PET investigation provided unprecedented evidence of relatively increased metabolism in the amygdalae, midbrain and pons in ALS patients as compared with control subjects, possibly due to local activation of astrocytes and microglia. Highly significant relative decreases in metabolism were found in large frontal and parietal regions in the bulbar onset patients as compared with the spinal onset patients and the controls, suggesting a differential metabolic and neuropsychological state between the two conditions. (orig.)

Brain hypermetabolism in amyotrophic lateral sclerosis: a FDG PET study in ALS of spinal and bulbar onset

Energy Technology Data Exchange (ETDEWEB)

Cistaro, Angelina; Fania, Piercarlo [Positron Emission Tomography Center IRMET S.p.A, Turin (Italy); Consuelo Valentini, Maria; Carrara, Giovanna [CTO Hospital, Department of Neuroradiology, Turin (Italy); Chio, Adriano; Calvo, Andrea; Moglia, Cristina; Montuschi, Anna [University of Turin, Department of Neuroscience, ALS Center, Turin (Italy); Nobili, Flavio [University of Genoa, Department of Neurosciences, Clinical Neurophysiology Unit, Ophthalmology and Genetics, Genoa (Italy); Morbelli, Silvia [University of Genoa, Department of Internal Medicine, Nuclear Medicine Unit, Genoa (Italy); Salmaso, Dario [Institute of Cognitive Sciences and Technologies, CNR, Padua (Italy); Institute of Cognitive Sciences and Technologies, CNR, Rome (Italy); Pagani, Marco [Institute of Cognitive Sciences and Technologies, CNR, Padua (Italy); Karolinska Hospital, Department of Nuclear Medicine, Stockholm (Sweden); Institute of Cognitive Sciences and Technologies, CNR, Rome (Italy)

2012-02-15

To identify the neurobiological traits of amyotrophic lateral sclerosis (ALS) and to elucidate functional differences between ALS of spinal and bulbar onset. We hypothesized that glucose metabolism distribution might vary between groups. The study groups comprised 32 patients with ALS of either bulbar (n = 13) or spinal (n=19) onset and 22 subjects as controls. They were investigated by [{sup 18}F]fluorodeoxyglucose (FDG) positron emission tomography (FDG PET), comparing the patient groups with each other and with the controls by statistical parametric mapping. Highly significant relative increases in glucose metabolism distribution were found in the group comprising all 32 ALS patients as compared with the controls in the bilateral amygdalae, midbrain, pons and cerebellum. Relative hypermetabolism was also found in patients with spinal onset as compared with the controls in the right midbrain. In patients with bulbar onset compared with the controls and with patients with spinal onset, large relatively hypometabolic areas were found in the bilateral frontal cortex, right insula, anterior cingulate, precuneus and inferior parietal lobe. Patients with spinal onset had significantly higher scores in a neuropsychological test assessing verbal fluency compared with patients with bulbar onset. This large FDG PET investigation provided unprecedented evidence of relatively increased metabolism in the amygdalae, midbrain and pons in ALS patients as compared with control subjects, possibly due to local activation of astrocytes and microglia. Highly significant relative decreases in metabolism were found in large frontal and parietal regions in the bulbar onset patients as compared with the spinal onset patients and the controls, suggesting a differential metabolic and neuropsychological state between the two conditions. (orig.)

Multi-event study of high-latitude thermospheric wind variations at substorm onset with a Fabry-Perot interferometer at Tromsoe, Norway

Science.gov (United States)

Xu, H.; Shiokawa, K.; Oyama, S. I.; Otsuka, Y.

2017-12-01

We studied the high-latitude thermospheric wind variations near the onset time of isolated substorms. Substorm-related energy input from the magnetosphere to the polar ionosphere modifies the high-latitude ionosphere and thermosphere. For the first time, this study showed the characteristics of high-latitude thermospheric wind variations at the substorm onset. We also investigated the possibility of these wind variations as a potential trigger of substorm onset by modifying the ionospheric current system (Kan, 1993). A Fabry-Perot interferometer (FPI) at Tromsoe, Norway provided wind measurements estimated from Doppler shift of both red-line (630.0 nm for the F region) and green-line (557.7 nm for the E region) emissions of aurora and airglow. We used seven-year data sets obtained from 2009 to 2015 with a time resolution of 13 min. We first identified the onset times of local isolated substorms using ground-based magnetometer data obtained at the Tromsoe and Bear Island stations, which belongs to the IMAGE magnetometer chain. We obtained 4 red-line events and 5 green-line events taken place at different local times. For all these events, the peak locations of westward ionospheric currents identified by the ground-based magnetometer chain were located at the poleward side of Tromsoe. Then, we calculated two weighted averages of wind velocities for 30 min around the onset time and 30 min after the onset time of substorms. We evaluated differences between these two weighted averages to estimate the strength of wind changes. The observed wind changes at these substorm onsets were less than 49 m/s (26 m/s) for red-line (green-line) events, which are much smaller than the typical plasma convection speed. This indicates that the plasma motion caused by substorm-induced thermospheric winds through ion-neutral collisions is a minor effect as the driver of high-latitude plasma convection, as well as the triggering of substorm onset. We discuss possible causes of these

Weak localization of seismic waves

International Nuclear Information System (INIS)

Larose, E.; Margerin, L.; Tiggelen, B.A. van; Campillo, M.

2004-01-01

We report the observation of weak localization of seismic waves in a natural environment. It emerges as a doubling of the seismic energy around the source within a spot of the width of a wavelength, which is several tens of meters in our case. The characteristic time for its onset is the scattering mean-free time that quantifies the internal heterogeneity

Does early-onset multiple sclerosis differ from adult-onset form in Iranian people

Directory of Open Access Journals (Sweden)

Fereshteh Ashtari

2010-01-01

Full Text Available Background: Few studies have attempted to delineate the clinical profile of multiple Sclerosis (MS among people of Asia. This study sought to identify the characteristics of early-onset Multiple Sclerosis (EOMS comparison to adult-onset form (AOMS in Isfahan, IRAN. Methods: This prospective study was conducted on 104 youths with multiple sclerosis beginning before the age of 16 years and 123 patients with adult-onset multiple sclerosis. Patients were observed for a mean period of 5 years. The common presenting symptoms, MRI finding, course of disease and disability score were compared between the two groups. Results: The mean onset age of disease in youths and adults were 14 ± 1.9 and 27.7 ± 8.06 years, respectively. Female/male ratio was 4.47:1 in EOMS and 3.92:1 in AOMS, this ratio was 7:1 in early childhood MS (≤ 10 year. The most common presenting symptom was optic neuritis in the EOMS group and paresthesia in AOMS. Optic neuritis was common in AOMS too, but brainstem/cerebellar signs were more common in EOMS than AOMS. Seizure occurred more frequently in EOMS than in the AOMS group (12.6% vs. 1.6%, respectively, p < 0.001. MRI showed that brainstem plaques were more prevalent in the EOMS compared with the AOMS group. Conclusions: It was concluded that early-onset MS does not significantly differ from adult form in terms of major clinical manifestation and course of disease, however Seizure is more common in EOMS, and brainstem and cerebellar symptoms as presenting symptom are more common.

Voice Onset Time in Azerbaijani Consonants

Directory of Open Access Journals (Sweden)

Ali Jahan

2009-10-01

Full Text Available Objective: Voice onset time is known to be cue for the distinction between voiced and voiceless stops and it can be used to describe or categorize a range of developmental, neuromotor and linguistic disorders. The aim of this study is determination of standard values of voice onset time for Azerbaijani language (Tabriz dialect. Materials & Methods: In this description-analytical study, 30 Azeris persons whom were selected conveniently by simple selection, uttered 46 monosyllabic words initiating with 6 Azerbaijani stops twice. Using Praat software, the voice onset time values were analyzed by waveform and wideband spectrogram in milliseconds. Vowel effect, sex differences and the effect of place of articulation on VOT, were evaluated and data were analyzed by one-way ANOVA test. Results: There was no significant difference in voice onset time between male and female Azeris speakers (P<0.05. Vowel and place of articulation had significant correlation with voice onset time (P<0.001. Voice onset time values for /b/, /p/, /d/, /t/, /g/, /k/, and [c], [ɟ] allophones were 10.64, 86.88, 13.35, 87.09, 26.25, 100.62, 131.19, 63.18 mili second, respectively. Conclusion: Voice onset time values are the same for Azerbaijani men and women. However, like many other languages, back and high vowels and back place of articulation lengthen VOT. Also, voiceless stops are aspirated in this language and voiced stops have positive VOT values.

Segregation by onset asynchrony.

Science.gov (United States)

Hancock, P J B; Walton, L; Mitchell, G; Plenderleith, Y; Phillips, W A

2008-08-05

We describe a simple psychophysical paradigm for studying figure-ground segregation by onset asynchrony. Two pseudorandom arrays of Gabor patches are displayed, to left and right of fixation. Within one array, a subset of elements form a figure, such as a randomly curving path, that can only be reliably detected when their onset is not synchronized with that of the background elements. Several findings are reported. First, for most participants, segregation required an onset asynchrony of 20-40 ms. Second, detection was no better when the figure was presented first, and thus by itself, than when the background elements were presented first, even though in the latter case the figure could not be detected in either of the two successive displays alone. Third, asynchrony segregated subsets of randomly oriented elements equally well. Fourth, asynchronous onsets aligned with the path could be discriminated from those lying on the path but not aligned with it. Fifth, both transient and sustained neural activity contribute to detection. We argue that these findings are compatible with neural signaling by synchronized rate codes. Finally, schizophrenic disorganization is associated with reduced sensitivity. Thus, in addition to bearing upon basic theoretical issues, this paradigm may have clinical utility.

Effect of abnormal notochord delamination on hindgut development in the Adriamycin mouse model.

Science.gov (United States)

Sato, Hideaki; Hajduk, Piotr; Furuta, Shigeyuki; Wakisaka, Munechika; Murphy, Paula; Puri, Prem; Kitagawa, Hiroaki

2013-11-01

Adriamycin mouse model (AMM) is a model of VACTERL anomalies. Sonic hedgehog (Shh) pathway, sourced by the notochord, is implicated of anorectal malformations. We hypothesized hindgut anomalies observed in the AMM are the result of abnormal effect of the notochord. Time-mated CBA/Ca mice received two intraperitoneal injections of Adriamycin (6 mg/kg) or saline as control on embryonic day (E) 7 and 8. Fetuses were harvested from E9 to E11, stained following whole mount in situ hybridization with labeled RNA probes to detect Shh and Fork head box F1(Foxf1) transcripts. Immunolocalization with endoderm marker Hnf3β was used to visualize morphology. Embryos were scanned by OPT to obtain 3D representations of expressions. In AMM, the notochord was abnormally displaced ventrally with attachment to the hindgut endoderm in 71 % of the specimens. In 32 % of the treated embryos abnormal hindgut ended blindly in a cystic structure, and both of types were remarked in 29 % of treated embryos. Endodermal Shh and mesenchymal Foxf1 genes expression were preserved around the hindgut cystic malformation. The delamination of the developing notochord in the AMM is disrupted, which may influence signaling mechanisms from the notochord to the hindgut resulting in abnormal patterning of the hindgut.

Intrauterine growth restriction and placental gene expression in severe preeclampsia, comparing early-onset and late-onset forms.

Science.gov (United States)

Nevalainen, Jaana; Skarp, Sini; Savolainen, Eeva-Riitta; Ryynänen, Markku; Järvenpää, Jouko

2017-10-26

To evaluate placental gene expression in severe early- or late-onset preeclampsia with intrauterine growth restriction compared to controls. Chorionic villus sampling was conducted after cesarean section from the placentas of five women with early- or late-onset severe preeclampsia and five controls for each preeclampsia group. Microarray analysis was performed to identify gene expression differences between the groups. Pathway analysis showed over-representation of gene ontology (GO) biological process terms related to inflammatory and immune response pathways, platelet development, vascular development, female pregnancy and reproduction in early-onset preeclampsia. Pathways related to immunity, complement and coagulation cascade were overrepresented in the hypergeometric test for the Kyoto Encyclopedia of Genes and Genomes (KEGG) database. Ten genes (ABI3BP, C7, HLA-G, IL2RB, KRBOX1, LRRC15, METTL7B, MPP5, RFLNB and SLC20A) had a ≥±1 fold expression difference in severe early-onset preeclampsia group compared to early controls. There were 362 genes that had a ≥±1 fold expression difference in severe early-onset preeclampsia group compared to late-onset preeclampsia group including ABI3BP, C7, HLA-G and IL2RB. There are significant differences in placental gene expression between severe early- and late-onset preeclampsia when both are associated with intrauterine growth restriction. ABI3BP, C7, HLA-G and IL2RB might contribute to the development of early form of severe preeclampsia.

Pulsations of Energetic Electron Pulsations In Association With Substorm Onset

Science.gov (United States)

Åsnes, A.; Stadsnes, J.; Bjordal, J.; Østgaard, N.; Haaland, S.; Rosenberg, T. J.; Detrick, D. L.

The Polar Ionospheric X-ray Imaging Experiment (PIXIE) is giving detailed images of the energetic electron precipitation when the POLAR satellite is near perigee over the Antarctica. In this area the PIXIE images have a spatial resolution of the order of 100 km, and a temporal resolution of 10 s can be obtained. In this paper we present the results of a study focusing on the onset and expansion of a substorm occuring on July 24, 1998. In this event we observe strong modulations of the energetic electron precipitation with period around 1 minute following substorm onset. The pulsations were restricted to a narrow magnetic local time sector in the pre-midnight region, about 0.5 hours wide, and showed movement towards higher latitudes and earlier lo- cal times. The event will be discussed in context of measurements from ground sta- tions and satellites in geosynchronous orbit. Precipitation of energetic electrons will be compared with VLF/ELF ground measurements. Features in the energetic elec- tron precipitation will be mapped to the magnetospheric equatorial plane by field line tracing.

Heritability of young- and old-onset ischaemic stroke.

Science.gov (United States)

Bluher, A; Devan, W J; Holliday, E G; Nalls, M; Parolo, S; Bione, S; Giese, A K; Boncoraglio, G B; Maguire, J M; Müller-Nurasyid, M; Gieger, C; Meschia, J F; Rosand, J; Rolfs, A; Kittner, S J; Mitchell, B D; O'Connell, J R; Cheng, Y C

2015-11-01

Although the genetic contribution to stroke risk is well known, it remains unclear if young-onset stroke has a stronger genetic contribution than old-onset stroke. This study aims to compare the heritability of ischaemic stroke risk between young and old, using common genetic variants from whole-genome array data in population-based samples. This analysis included 4050 ischaemic stroke cases and 5765 controls from six study populations of European ancestry; 47% of cases were young-onset stroke (age stroke risk in these unrelated individuals, the pairwise genetic relatedness was estimated between individuals based on their whole-genome array data using a mixed linear model. Heritability was estimated separately for young-onset stroke and old-onset stroke (age ≥ 55 years). Heritabilities for young-onset stroke and old-onset stroke were estimated at 42% (±8%, P genetic contribution to the risk of stroke may be higher in young-onset ischaemic stroke, although the difference was not statistically significant. © 2015 EAN.

Suicide in later life : A comparison between cases with early-onset and late-onset depression

NARCIS (Netherlands)

Voshaar, Richard C. Oude; Kapur, Nay; Bickley, Harriet; Williams, Alyson; Purandare, Nitin

Background: Suicide rates are high in elderly people with depressive disorder. We compared behavioural, clinical and care characteristics of depressed elderly patients, aged 60 years and over at the time of death by suicide, with an early-onset depression (EOD, onset before 60 years) with those

Measurement of voice onset time in maxillectomy patients.

Science.gov (United States)

Hattori, Mariko; Sumita, Yuka I; Taniguchi, Hisashi

2014-01-01

Objective speech evaluation using acoustic measurement is needed for the proper rehabilitation of maxillectomy patients. For digital evaluation of consonants, measurement of voice onset time is one option. However, voice onset time has not been measured in maxillectomy patients as their consonant sound spectra exhibit unique characteristics that make the measurement of voice onset time challenging. In this study, we established criteria for measuring voice onset time in maxillectomy patients for objective speech evaluation. We examined voice onset time for /ka/ and /ta/ in 13 maxillectomy patients by calculating the number of valid measurements of voice onset time out of three trials for each syllable. Wilcoxon's signed rank test showed that voice onset time measurements were more successful for /ka/ and /ta/ when a prosthesis was used (Z = -2.232, P = 0.026 and Z = -2.401, P = 0.016, resp.) than when a prosthesis was not used. These results indicate a prosthesis affected voice onset measurement in these patients. Although more research in this area is needed, measurement of voice onset time has the potential to be used to evaluate consonant production in maxillectomy patients wearing a prosthesis.

Measurement of Voice Onset Time in Maxillectomy Patients

Directory of Open Access Journals (Sweden)

Mariko Hattori

2014-01-01

Full Text Available Objective speech evaluation using acoustic measurement is needed for the proper rehabilitation of maxillectomy patients. For digital evaluation of consonants, measurement of voice onset time is one option. However, voice onset time has not been measured in maxillectomy patients as their consonant sound spectra exhibit unique characteristics that make the measurement of voice onset time challenging. In this study, we established criteria for measuring voice onset time in maxillectomy patients for objective speech evaluation. We examined voice onset time for /ka/ and /ta/ in 13 maxillectomy patients by calculating the number of valid measurements of voice onset time out of three trials for each syllable. Wilcoxon’s signed rank test showed that voice onset time measurements were more successful for /ka/ and /ta/ when a prosthesis was used (Z=−2.232, P=0.026 and Z=−2.401, P=0.016, resp. than when a prosthesis was not used. These results indicate a prosthesis affected voice onset measurement in these patients. Although more research in this area is needed, measurement of voice onset time has the potential to be used to evaluate consonant production in maxillectomy patients wearing a prosthesis.

Adult-onset offenders: Is a tailored theory warranted?

Science.gov (United States)

Beckley, Amber L.; Caspi, Avshalom; Harrington, Honalee; Houts, Renate M.; Mcgee, Tara Renae; Morgan, Nick; Schroeder, Felix; Ramrakha, Sandhya; Poulton, Richie; Moffitt, Terrie E.

2016-01-01

Purpose To describe official adult-onset offenders, investigate their antisocial histories and test hypotheses about their origins. Methods We defined adult-onset offenders among 931 Dunedin Study members followed to age 38, using criminal-court conviction records. Results Official adult-onset offenders were 14% of men, and 32% of convicted men, but accounted for only 15% of convictions. As anticipated by developmental theories emphasizing early-life influences on crime, adult-onset offenders’ histories of antisocial behavior spanned back to childhood. Relative to juvenile-offenders, during adolescence they had fewer delinquent peers and were more socially inhibited, which may have protected them from conviction. As anticipated by theories emphasizing the importance of situational influences on offending, adult-onset offenders, relative to non-offenders, during adulthood more often had schizophrenia, bipolar disorder, and alcohol-dependence, had weaker social bonds, anticipated fewer informal sanctions, and self-reported more offenses. Contrary to some expectations, adult-onset offenders did not have high IQ or high socioeconomic-status families protecting them from juvenile conviction. Conclusions A tailored theory for adult-onset offenders is unwarranted because few people begin crime de novo as adults. Official adult-onset offenders fall on a continuum of crime and its correlates, between official non-offenders and official juvenile-onset offenders. Existing theories can accommodate adult-onset offenders. PMID:27134318

The clinical features of late onset anorexia nervosa.

OpenAIRE

Joughin, N. A.; Crisp, A. H.; Gowers, S. G.; Bhat, A. V.

1991-01-01

This study examines clinical features of late onset anorexia nervosa. This involved the scrutiny of a large database of patients with anorexia nervosa comprising data gathered at standardized initial assessments over the period 1960-1990. Patients with a late onset were compared to other selected patient samples. The population comprised 12 patients with a first onset of anorexia nervosa at or after the age of 30, 415 patients with an onset after 15 but before 20 and 9 patients with an onset ...

Antibodies in juvenile-onset myositis.

Science.gov (United States)

Tansley, Sarah L

2016-11-01

Juvenile-onset myositis is a highly heterogeneous disease. Myositis-specific and associated autoantibodies provide a potential means of subdividing patients into clinically homogenous subgroups. Given the increasing availability of autoantibody testing, this review explores the phenotypes associated with different autoantibodies in juvenile-onset myositis and the potential clinical utility of autoantibody testing. Autoantibodies can be identified in 60-70% of children with myositis and the recent discovery of novel myositis-associated autoantibodies in adult patients suggests this may increase in the near future. Detailed phenotype descriptions are now known for several autoantibodies commonly identified in juvenile-onset disease. Whilst there is insufficient evidence to recommend a differential treatment approach based on autoantibody status, it is becoming increasingly clear that some autoantibody subgroups are often treatment resistant and may benefit from a more aggressive approach. The validation of nonspecialised methods for myositis-specific autoantibody detection should lead to more widely available testing. In juvenile-onset disease, this will provide detailed prognostic information and in the future may also influence approach.

Childhood Onset Schizophrenia: Clinical Features, Course and Outcome

Science.gov (United States)

Sood, Mamta; Kattimani, Shivanand

2008-01-01

Schizophrenia in children is diagnosed by using adult criteria. Based on the age of onset, patients with childhood onset schizophrenia (COS) are subdivided into those with very early onset (before age 12-14 years) and those with early onset (between 14-17 years). The prevalence of COS is reported to be 1 in 10,000 before the age of 12 years;…

Simultaneous observation of auroral substorm onset in Polar satellite global images and ground-based all-sky images

Science.gov (United States)

Ieda, Akimasa; Kauristie, Kirsti; Nishimura, Yukitoshi; Miyashita, Yukinaga; Frey, Harald U.; Juusola, Liisa; Whiter, Daniel; Nosé, Masahito; Fillingim, Matthew O.; Honary, Farideh; Rogers, Neil C.; Miyoshi, Yoshizumi; Miura, Tsubasa; Kawashima, Takahiro; Machida, Shinobu

2018-05-01

Substorm onset has originally been defined as a longitudinally extended sudden auroral brightening (Akasofu initial brightening: AIB) followed a few minutes later by an auroral poleward expansion in ground-based all-sky images (ASIs). In contrast, such clearly marked two-stage development has not been evident in satellite-based global images (GIs). Instead, substorm onsets have been identified as localized sudden brightenings that expand immediately poleward. To resolve these differences, optical substorm onset signatures in GIs and ASIs are compared in this study for a substorm that occurred on December 7, 1999. For this substorm, the Polar satellite ultraviolet global imager was operated with a fixed-filter (170 nm) mode, enabling a higher time resolution (37 s) than usual to resolve the possible two-stage development. These data were compared with 20-s resolution green-line (557.7 nm) ASIs at Muonio in Finland. The ASIs revealed the AIB at 2124:50 UT and the subsequent poleward expansion at 2127:50 UT, whereas the GIs revealed only an onset brightening that started at 2127:49 UT. Thus, the onset in the GIs was delayed relative to the AIB and in fact agreed with the poleward expansion in the ASIs. The fact that the AIB was not evident in the GIs may be attributed to the limited spatial resolution of GIs for thin auroral arc brightenings. The implications of these results for the definition of substorm onset are discussed herein.[Figure not available: see fulltext.

The role of imported cases and favorable meteorological conditions in the onset of dengue epidemics.

Directory of Open Access Journals (Sweden)

Chuin-Shee Shang

2010-08-01

Full Text Available Travelers who acquire dengue infection are often routes for virus transmission to other regions. Nevertheless, the interplay between infected travelers, climate, vectors, and indigenous dengue incidence remains unclear. The role of foreign-origin cases on local dengue epidemics thus has been largely neglected by research. This study investigated the effect of both imported dengue and local meteorological factors on the occurrence of indigenous dengue in Taiwan.Using logistic and Poisson regression models, we analyzed bi-weekly, laboratory-confirmed dengue cases at their onset dates of illness from 1998 to 2007 to identify correlations between indigenous dengue and imported dengue cases (in the context of local meteorological factors across different time lags. Our results revealed that the occurrence of indigenous dengue was significantly correlated with temporally-lagged cases of imported dengue (2-14 weeks, higher temperatures (6-14 weeks, and lower relative humidity (6-20 weeks. In addition, imported and indigenous dengue cases had a significant quantitative relationship in the onset of local epidemics. However, this relationship became less significant once indigenous epidemics progressed past the initial stage.These findings imply that imported dengue cases are able to initiate indigenous epidemics when appropriate weather conditions are present. Early detection and case management of imported cases through rapid diagnosis may avert large-scale epidemics of dengue/dengue hemorrhagic fever. The deployment of an early-warning surveillance system, with the capacity to integrate meteorological data, will be an invaluable tool for successful prevention and control of dengue, particularly in non-endemic countries.

SCOPE-mTL: A non-invasive tool for identifying and lateralizing mesial temporal lobe seizures prior to scalp EEG ictal onset.

Science.gov (United States)

Lam, Alice D; Maus, Douglas; Zafar, Sahar F; Cole, Andrew J; Cash, Sydney S

2017-09-01

In mesial temporal lobe (mTL) epilepsy, seizure onset can precede the appearance of a scalp EEG ictal pattern by many seconds. The ability to identify this early, occult mTL seizure activity could improve lateralization and localization of mTL seizures on scalp EEG. Using scalp EEG spectral features and machine learning approaches on a dataset of combined scalp EEG and foramen ovale electrode recordings in patients with mTL epilepsy, we developed an algorithm, SCOPE-mTL, to detect and lateralize early, occult mTL seizure activity, prior to the appearance of a scalp EEG ictal pattern. Using SCOPE-mTL, 73% of seizures with occult mTL onset were identified as such, and no seizures that lacked an occult mTL onset were identified as having one. Predicted mTL seizure onset times were highly correlated with actual mTL seizure onset times (r=0.69). 50% of seizures with early mTL onset were lateralizable prior to scalp ictal onset, with 94% accuracy. SCOPE-mTL can identify and lateralize mTL seizures prior to scalp EEG ictal onset, with high sensitivity, specificity, and accuracy. Quantitative analysis of scalp EEG can provide important information about mTL seizures, even in the absence of a visible scalp EEG ictal correlate. Copyright © 2017 International Federation of Clinical Neurophysiology. Published by Elsevier B.V. All rights reserved.

Effects of stitch density and stitch thread thickness on mode II delamination properties of Vectran stitched composites

KAUST Repository

Herwan, J.

2014-11-01

© Institute of Materials, Minerals and Mining 2014. Mode II delamination properties of Vectran stitched composites were investigated, and tabbed end notch flexural specimen testing was used to prevent premature failure. The effects of stitch density and stitch thread thickness were explored, and fibre compaction due to the stitching process was also verified. The results show that, in moderately stitched laminates (low stitch density), the improvement in GIIC was negligible. Crack bridging by the stitch threads at the crack zone were mostly compensated for the effect of fibre compaction, which reduced the GIIC values. Conversely, in densely stitched laminates (high stitch density), GIIC values were improved significantly (2·4 times higher than those of unstitched laminates). The effects of stitch thread thickness appeared to be negligible in moderately stitched laminates. For densely stitched laminates, thicker stitch thread (500 denier) possessed GIIC values that were 45·7% higher than thinner stitch thread (200 denier).

Effects of stitch density and stitch thread thickness on mode II delamination properties of Vectran stitched composites

KAUST Repository

Herwan, J.; Kondo, A.; Morooka, S.; Watanabe, N.

2014-01-01

© Institute of Materials, Minerals and Mining 2014. Mode II delamination properties of Vectran stitched composites were investigated, and tabbed end notch flexural specimen testing was used to prevent premature failure. The effects of stitch density and stitch thread thickness were explored, and fibre compaction due to the stitching process was also verified. The results show that, in moderately stitched laminates (low stitch density), the improvement in GIIC was negligible. Crack bridging by the stitch threads at the crack zone were mostly compensated for the effect of fibre compaction, which reduced the GIIC values. Conversely, in densely stitched laminates (high stitch density), GIIC values were improved significantly (2·4 times higher than those of unstitched laminates). The effects of stitch thread thickness appeared to be negligible in moderately stitched laminates. For densely stitched laminates, thicker stitch thread (500 denier) possessed GIIC values that were 45·7% higher than thinner stitch thread (200 denier).

Late-onset pathological gambling: clinical correlates and gender differences.

Science.gov (United States)

Grant, Jon E; Kim, Suck Won; Odlaug, Brian L; Buchanan, Stephanie N; Potenza, Marc N

2009-01-01

Age at illness onset has significant clinical implications for psychiatric disorders. Prior research has not systematically examined age at illness onset and its relationship to the clinical characteristics of pathological gambling (PG). Among a sample of 322 consecutive subjects with current DSM-IV PG, those with late-onset (at or after age 55 years) PG were compared to those with earlier onsets (at or prior to age 25, 26-54 years old) on measures of PG severity, co-occurring disorders, social and legal problems, and family history. Forty-two (13.4%) subjects reported onset of PG at or after age 55 years, 63 (19.6%) reported onset prior to age 25 years, and the majority (n=217; 67.4%) reported onset between the ages of 26 and 54 years. The late-onset group were less likely to declare bankruptcy (p=.029) or have credit card debt attributable to gambling (p=.006). Late-onset PG subjects were significantly more likely to have an anxiety disorder (pgambling problem. Exploratory analyses identified an age-by-gender interaction with respect to treatment-seeking, with more pronounced age-related shortening in the duration between problem onset and treatment seeking observed in men. Age at onset of PG is associated with multiple important clinical features. Long durations of PG prior to treatment-seeking indicate the need for improved prevention efforts among individuals with early PG onset. Late-onset PG is relatively common and has distinct clinical characteristics suggesting that this population might benefit from unique prevention and treatment strategies.

Body composition in adults with Type 1 diabetes at onset and during the first year of insulin therapy

DEFF Research Database (Denmark)

Rosenfalck, A M; Almdal, Thomas Peter; Hilsted, J

2002-01-01

. RESULTS: During the first year after onset of diabetes body weight (BW) increased 4.3 +/- 2.9 (0.1-8.3) kg (P = 0.0012) distributed as a 13.3% (1.6 kg) increase in total fat mass (FM) and 4.9% (2.5 kg) increase in lean body soft tissue mass (LBM). The self-reported weight loss at onset was 6.3 +/- 2.5 kg...... (1.5-10.0 kg). Compared with two reference populations the Metropolitan Life Insurance Co. and a healthy age and sex-matched local DXA scanned group the initial body composition data demonstrated BW 6.2 kg below ideal weight and a significant reduction of the FM (25% or -0.87 sd), whereas LBM...... was within the expected range. CONCLUSIONS: During the first year after onset of Type 1 diabetes the mean increase in BW is 6.5% with a 13.3% increase in FM and a 4.9% increase in LBM. Self-reported data on premorbid BW suggest an approximately 10% reduction in BW at onset of Type 1 diabetes. Compared...

Early onset depression: the relevance of anxiety.

Science.gov (United States)

Parker, G; Wilhelm, K; Asghari, A

1997-01-01

The aim of this study was to determine risk factors that may differentiate early onset from late onset depression. A non-clinical cohort that had been assessed from 1978 to 1993 at 5 yearly intervals and that had a high prevalence rate of lifetime depression took part in the study. We established an appropriate age cut-off to distinguish early onset (i.e. before 26 years) of major and of minor depression, and examined the relevance of a number of possible determinants of early onset depression assessed over the life of the study. Despite several dimensional measures of depression, self-esteem and personality being considered, they generally failed (when assessed early in the study) to discriminate subsequent early onset depression, with the exception of low masculinity scores being a weak predictor of major and/or minor depression. Early onset depression was strongly predicted, however, by a lifetime episode of a major anxiety disorder, with generalised anxiety being a somewhat stronger and more consistent predictor than panic disorder, agoraphobia and minor anxiety disorders (ie social phobia, simple phobia). The possibility that anxiety may act as a key predispositional factor to early onset depression and to a greater number of depressive episodes is important in that clinical assessment and treatment of any existing anxiety disorder may be a more efficient and useful strategy than focussing primarily on the depressive disorder.

Noninvasive Localization of Accessory Pathways in Patients with Wolff-Parkinson-White Syndrome: A Strain Imaging Study

Science.gov (United States)

Esmaeilzadeh, Maryam; Omran, Mohammad Taghi Salehi; Maleki, Majid; Haghjoo, Majid; Noohi, Feridoun; Haghighi, Zahra Ojaghi; Sadeghpour, Anita; Davari, Paridokht Nakhostin; Abkenar, Hooman Bakhshandeh

2013-01-01

Background: Noninvasive techniques for the localization of the accessory pathways (APs) might help guide mapping procedures and ablation techniques. We sought to examine the diagnostic accuracy of strain imaging for the localization of the APs in Wolff-Parkinson-White syndrome. Methods: We prospectively studied 25 patients (mean age = 32 ± 17 years, 58.3% men) with evidence of pre-excitation on electrocardiography (ECG). Electromechanical interval was defined as the time difference between the onset of delta wave and the onset of regional myocardial contraction. Time differences between the onset of delta wave (δ) and the onset of regional myocardial contraction (δ-So), peak systolic motion (δ-Sm), regional strain (δ-ε), peak strain (δ-εp), and peak strain rate (δ-SRp) were measured. Results: There was a significant difference between time to onset of delta wave to onset of peak systolic motion (mean ± SD) in the AP location (A) and normal segments (B) versus that in the normal volunteers (C) [A: (57.08 ± 23.88 msec) vs. B: (75.20 ± 14.75) vs. C: (72.9 0 ± 11.16); p value (A vs. B) = 0.004 and p value (A vs. C) = 0.18] and [A: (49.17 ± 35.79) vs. B: (67.60 ± 14.51) vs. C: (67.40 ± 6.06 msec); p value (A vs. B) < 0.001 and p value (A vs. C) = 0.12, respectively]. Conclusion: Our study showed that strain imaging parameters [(δ-So) and (δ-Strain)] are superior to the ECG in the localization of the APs (84% vs. 76%). PMID:23967027

Measurement of Voice Onset Time in Maxillectomy Patients

OpenAIRE

Hattori, Mariko; Sumita, Yuka I.; Taniguchi, Hisashi

2014-01-01

Objective speech evaluation using acoustic measurement is needed for the proper rehabilitation of maxillectomy patients. For digital evaluation of consonants, measurement of voice onset time is one option. However, voice onset time has not been measured in maxillectomy patients as their consonant sound spectra exhibit unique characteristics that make the measurement of voice onset time challenging. In this study, we established criteria for measuring voice onset time in maxillectomy patients ...

Pediatric-Onset and Adult-Onset Separation Anxiety Disorder Across Countries in the World Mental Health Survey

NARCIS (Netherlands)

Silove, Derrick; Alonso, Jordi; Bromet, Evelyn; Gruber, Mike; Sampson, Nancy; Scott, Kate; Andrade, Laura; Benjet, Corina; Caldas de Almeida, Jose Miguel; De Girolamo, Giovanni; de Jonge, Peter; Demyttenaere, Koen; Fiestas, Fabian; Florescu, Silvia; Gureje, Oye; He, Yanling; Karam, Elie; Lepine, Jean-Pierre; Murphy, Sam; Villa-Posada, Jose; Zarkov, Zahari; Kessler, Ronald C.

Objective: The age-at-onset criterion for separation anxiety disorder was removed in DSM-5, making it timely to examine the epidemiology of separation anxiety disorder as a disorder with onsets spanning the life course, using cross-country data. Method: The sample included 38,993 adults in 18

Fatigue Life Analysis of Tapered Hybrid Composite Flexbeams

Science.gov (United States)

Murri, Gretchen B.; Schaff, Jeffery R.; Dobyns, Alan L.

2002-01-01

Nonlinear-tapered flexbeam laminates from a full-size composite helicopter rotor hub flexbeam were tested under combined constant axial tension and cyclic bending loads. The two different graphite/glass hybrid configurations tested under cyclic loading failed by delamination in the tapered region. A 2-D finite element model was developed which closely approximated the flexbeam geometry, boundary conditions, and loading. The analysis results from two geometrically nonlinear finite element codes, ANSYS and ABAQUS, are presented and compared. Strain energy release rates (G) obtained from the above codes using the virtual crack closure technique (VCCT) at a resin crack location in the flexbeams are presented for both hybrid material types. These results compare well with each other and suggest that the initial delamination growth from the resin crack toward the thick region of the flexbeam is strongly mode II. The peak calculated G values were used with material characterization data to calculate fatigue life curves and compared with test data. A curve relating maximum surface strain to number of loading cycles at delamination onset compared reasonably well with the test results.

Observation of Current Structures at Type-III ELM Onset on EAST

DEFF Research Database (Denmark)

Yan, Ning; Naulin, Volker; Xu, G.

structure. To verify the current characteristic of this structure, a mono-polar current filaments model was involved, which can reproduce same pattern commendably. Thus, current transport may dominant in transitional stage and plays an important role in the nonlinear development phase of ELM exhaustive......In far scrape-o layer (SOL), alternating negative and positive burst structures in ion saturation current were detected at the onset of each type-III edge localized mode (ELM) on EAST. Different from the fast streaming phenomenon reported previously, one subsequent positive burst structure appears...... every time in the early phase of ELM. It seems like a quick transitional stage between edge localized mode (MHD) phase and transport phase during the ELM. A pronounced sinusoidal pattern has been observed on the radial magnetic induction signal by Langmuir - magnetic probe, corresponding with almost...

Regional cerebral blood flow in diagnosis of childhood onset partial epilepsy

International Nuclear Information System (INIS)

Mitsuyoshi, Izuru; Tamaki, Kyoko; Mutoh, Kozo; Iwasaki, Yasushi; Konishi, Junji; Mikawa, Haruki; Okuno, Takehiko.

1993-01-01

We compared regional cerebral blood flow assessed by [ 123 I]N-isopropyl-p-iodoamphetamine (IMP) single-photon emission tomography (SPECT) with magnetic resonance imaging (MRI), computed tomography (CT) and interictal surface electroencephalography (EEG) to evaluate its diagnostic potential in 24 patients with partial seizures with onset in childhood. Focal low uptake areas were observed in SPECT scans of 18 patients and were presumed to represent epileptogenic areas in 17. MRI revealed an abnormality in 12 and CT in 6 patients, and all organic lesions showed SPECT abnormalities, too. Six patients without focal structural abnormalities showed regional perfusion deficit on SPECT. Routine scalp EEG revealed an epileptic focus in 17 patients and three of them showed discordant results between SPECT and EEG, which suggested more serious brain disorders. In two patients without EEG localization only SPECT showed focal abnormalities in the probable epileptic area. [ 123 I]IMP-SPECT was useful in locating the epileptic focus, particularly during the early period after the onset of partial seizures when the EEG gave inconclusive results. (author)

Adverse Housing Conditions and Early-Onset Delinquency.

Science.gov (United States)

Jackson, Dylan B; Newsome, Jamie; Lynch, Kellie R

2017-09-01

Housing constitutes an important health resource for children. Research has revealed that, when housing conditions are unfavorable, they can interfere with child health, academic performance, and cognition. Little to no research, however, has considered whether adverse housing conditions and early-onset delinquency are significantly associated with one another. This study explores the associations between structural and non-structural housing conditions and delinquent involvement during childhood. Data from the Fragile Families and Child Wellbeing Study (FFCWS) were employed in this study. Each adverse housing condition was significantly associated with early-onset delinquency. Even so, disarray and deterioration were only significantly linked to early delinquent involvement in the presence of health/safety hazards. The predicted probability of early-onset delinquency among children exposed to housing risks in the presence of health/safety hazards was nearly three times as large as the predicted probability of early-onset delinquency among children exposed only to disarray and/or deterioration, and nearly four times as large as the predicted probability of early-onset delinquency among children exposed to none of the adverse housing conditions. The findings suggest that minimizing housing-related health/safety hazards among at-risk subsets of the population may help to alleviate other important public health concerns-particularly early-onset delinquency. Addressing household health/safety hazards may represent a fruitful avenue for public health programs aimed at the prevention of early-onset delinquency. © Society for Community Research and Action 2017.

Associations between onset of effort-reward imbalance at work and onset of musculoskeletal pain: analyzing observational longitudinal data as pseudo-trials.

Science.gov (United States)

Halonen, Jaana I; Virtanen, Marianna; Leineweber, Constanze; Rod, Naja H; Westerlund, Hugo; Magnusson Hanson, Linda L

2018-03-27

Existing evidence of an association between effort-reward imbalance (ERI) at work and musculoskeletal pain is limited, preventing reliable conclusions about the magnitude and direction of the relation. In a large longitudinal study, we examined whether the onset of ERI is associated with subsequent onset of musculoskeletal pain among those free of pain at baseline, and vice versa, whether onset of pain leads to onset of ERI. Data were from the Swedish Longitudinal Occupational Survey of Health (SLOSH) study. We used responses from 3 consecutive study phases to examine whether exposure onset between the first and second phases predicts onset of the outcome in the third phase (N = 4079). Effort-reward imbalance was assessed with a short form of the ERI model. Having neck-shoulder and low back pain affecting life to some degree in the past 3 months was also assessed in all study phases. As covariates, we included age, sex, marital status, occupational status, and physically strenuous work. In the adjusted models, onset of ERI was associated with onset of neck-shoulder pain (relative risk [RR] 1.51, 95% confidence interval [CI] 1.21-1.89) and low back pain (RR 1.21, 95% CI 0.97-1.50). The opposite was also observed, as onset of neck-shoulder pain increased the risk of subsequent onset of ERI (RR 1.36, 95% CI 1.05-1.74). Our findings suggest that when accounting for the temporal order, the associations between ERI and musculoskeletal pain that affects life are bidirectional, implying that interventions to both ERI and pain may be worthwhile to prevent a vicious cycle.

28 CFR 79.35 - Proof of onset of leukemia at least two years after first exposure, and proof of onset of a...

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Proof of onset of leukemia at least two... Participants § 79.35 Proof of onset of leukemia at least two years after first exposure, and proof of onset of... be the date of first or initial exposure. The date of onset will be the date of diagnosis as...

New-onset diabetes and antihypertensive treatment

Directory of Open Access Journals (Sweden)

Rychlik, Reinhard

2010-03-01

Full Text Available Introduction: Chronic diseases substantially contribute to the continuous increase in health care expenditures, including type-2 diabetes mellitus as one of the most expensive chronic diseases. Arterial hypertension presents a risk factor for the development of type-2 diabetes mellitus. Numerous analyses have demonstrated that antihypertensive therapies promote the development of type-2-diabetes mellitus. Studies indicate, that the application of angiotensin converting enzyme (ACE inhibitors and angiotensin-receptor-blockers (ARB lead to less new-onset diabetes compared to beta-blockers, diuretics and placebo. Given that beta-blockers and diuretics impair the glucose metabolism, the metabolic effects of different antihypertensive drugs should be regarded; otherwise not only the disease itself, but also antihypertensive therapies may promote the development of new-onset diabetes. Even though, the cost of ACE inhibitors and ARB are higher, the use in patients with metabolic disorders could be cost-effective in the long-term if new-onset diabetes is avoided. Objectives: To evaluate which class of antihypertensive agents promote the development or the manifestation of type-2 diabetes mellitus. How high is the incidence of new-onset diabetes during antihypertensive therapy and how is treatment-induced type-2 diabetes mellitus evaluated clinically? Which agents are therefore cost-effective in the long term? Which ethical, social or legal aspects should be regarded?MethodsA systematic literature review was conducted including clinical trials with at least ten participants which reported new-onset diabetes in the course of antihypertensive treatment. The trials had to be published after 1966 (after 2003 for economic publications in English or German. Results: A total of 34 clinical publications meet the inclusion criteria. Of these, eight publications focus on the development of diabetes mellitus under treatment with diuretic and/or beta-blockers, six

Age of onset and the subclassification of conduct/dissocial disorder.

Science.gov (United States)

Silberg, Judy; Moore, Ashlee A; Rutter, Michael

2015-07-01

Conduct Disorder (CD) is a markedly heterogeneous psychiatric condition. Moffitt (1993) proposed that subclassification of CD should be according to age of onset. Our goals were to compare childhood-onset and adolescent-onset CD in terms of differences in phenotypic risk factors, genetic analyses, and factors associated with the persistence of antisocial behavior into young adulthood. The data are from the Virginia Twin Study of Adolescent Behavioral Development (VTSABD) and Young Adult Follow-Up (YAFU). Childhood-onset CD was defined as CD beginning at or before age 11. Adolescent-onset CD was defined as having CD onset between ages 14 and 17. These subgroups were compared on ADHD, young adult antisocial behavior (ASB), family dysfunction, and parental depression. Genetic analyses compare childhood-onset and adolescent-onset CD, as well as their cooccurrence with ADHD and ASB. Finally, predictors of persistence were examined. Childhood-onset CD was significantly associated with ADHD, ASB, family dysfunction, and parental depression. Adolescent-onset CD was marginally associated with parental depression (p = .05) but not with any of the other risk factors. Univariate genetic models showed that both childhood-onset and adolescent-onset CD involve a large genetic liability accounting for 62% and 65% of the variance, respectively. A common genetic factor (as well as an ADHD-specific factor) accounted for the cooccurrence of childhood-onset CD and ADHD. The cooccurrence of childhood-onset CD and ASB are reflected by a common genetic factor with genetic specific effects on ASB. There was no etiological link between adolescent-onset CD and either ADHD or ASB. Both ADHD and family dysfunction were significantly associated with the persistence of antisocial behavior into young adulthood. Phenotypic findings differentiated between childhood-onset and adolescent-onset CD. ADHD and family dysfunction predicted persistence of antisocial behavior into young adulthood. © 2014

Comparison of success rate and onset time of two different anesthesia techniques

Science.gov (United States)

Haghighat, Abbas; Hasheminia, Dariush; Samandari, Mohammad-Hasan; Safarian, Vajihe; Davoudi, Amin

2015-01-01

Background Using local anesthetic is common to control the pain through blocking the nerve reversibly in dental procedures. Gow-Gates (GG) technique has a high success rate but less common. This study aimed to compare the onset time and success rate in GG and standard technique of inferior alveolar nerve block (IANB). Material and Methods This descriptive, single blind study was consisted of 136 patients (59 males and 77 females) who were randomly received GG or IANB for extraction of mandibular molar teeth. Comparisons between the successes of two anesthetic injection techniques were analyzed with Chi-square test. Incidence of pulpal anesthesia and soft tissue anesthesia were analyzed with Kaplan-Meier method. Mean onset times of pulpal anesthesia, soft tissue and lip numbness were analyzed with Log-Rank test. Comparisons were considered significant at P≤0.05 by using SPSS software ver.15. Results The incidence of pulpal anesthesia in the IANB group (canine 49.3%, premolar 60.3%) were not significantly different from the GG group (canine 41.3%, premolar 74.6%) (P=0.200 and P=0.723). The success rate in the IANB group (80.82%) was not significantly different from the GG group (92.02%) (P=0.123). Furthermore, onset time of lip and buccal soft tissue numbness in GG group (3.25, 4.96 minutes) was quite similar to IANB group (3.22, 4.89 minutes) (all Pvalues >0.05). Conclusions Although this study demonstrated higher clinical success rate for GG than IANB technique, no significant differences in success rates and onset time were observed between two techniques. Key words: Anesthesia, Inferior alveolar nerve, nerve block, success rate. PMID:25858085

An Optical Interferometric Triaxial Displacement Sensor for Structural Health Monitoring: Characterization of Sliding and Debonding for a Delamination Process.

Science.gov (United States)

Zhu, Chen; Chen, Yizheng; Zhuang, Yiyang; Du, Yang; Gerald, Rex E; Tang, Yan; Huang, Jie

2017-11-22

This paper presents an extrinsic Fabry-Perot interferometer-based optical fiber sensor (EFPI) for measuring three-dimensional (3D) displacements, including interfacial sliding and debonding during delamination. The idea employs three spatially arranged EFPIs as the sensing elements. In our sensor, the three EFPIs are formed by three endfaces of three optical fibers and their corresponding inclined mirrors. Two coincident roof-like metallic structures are used to support the three fibers and the three mirrors, respectively. Our sensor was calibrated and then used to monitor interfacial sliding and debonding between a long square brick of mortar and its support structure (i.e., a steel base plate) during the drying/curing process. This robust and easy-to-manufacture triaxial EFPI-based 3D displacement sensor has great potential in structural health monitoring, the construction industry, oil well monitoring, and geotechnology.

An Optical Interferometric Triaxial Displacement Sensor for Structural Health Monitoring: Characterization of Sliding and Debonding for a Delamination Process

Directory of Open Access Journals (Sweden)

Chen Zhu

2017-11-01

Full Text Available This paper presents an extrinsic Fabry–Perot interferometer-based optical fiber sensor (EFPI for measuring three-dimensional (3D displacements, including interfacial sliding and debonding during delamination. The idea employs three spatially arranged EFPIs as the sensing elements. In our sensor, the three EFPIs are formed by three endfaces of three optical fibers and their corresponding inclined mirrors. Two coincident roof-like metallic structures are used to support the three fibers and the three mirrors, respectively. Our sensor was calibrated and then used to monitor interfacial sliding and debonding between a long square brick of mortar and its support structure (i.e., a steel base plate during the drying/curing process. This robust and easy-to-manufacture triaxial EFPI-based 3D displacement sensor has great potential in structural health monitoring, the construction industry, oil well monitoring, and geotechnology.

Early-onset stargardt disease: phenotypic and genotypic characteristics

NARCIS (Netherlands)

Lambertus, S.; Huet, R.A.C. van; Bax, N.M.; Hoefsloot, L.H.; Cremers, F.P.M.; Boon, C.J.F.; Klevering, B.J.; Hoyng, C.B.

2015-01-01

OBJECTIVE: To describe the phenotype and genotype of patients with early-onset Stargardt disease. DESIGN: Retrospective cohort study. PARTICIPANTS: Fifty-one Stargardt patients with age at onset onset, medical history, initial

Late-Onset Asthma

DEFF Research Database (Denmark)

Ulrik, Charlotte Suppli

2017-01-01

Late-onset asthma is common, associated with poor outcome, underdiagnosed and undertreated, possibly due to the modifying effect of ageing on disease expression. Although the diagnostic work-up in elderly individuals suspected of having asthma follows the same steps as in younger individuals (case......, to objectively confirm asthma. If necessary, a trial of oral or inhaled corticosteroid might be necessary. Asthma can be diagnosed when increased airflow variability is identified in a symptomatic patient, and if the patient does not have a history of exposure, primarily smoking, known to cause chronic...... obstructive pulmonary disease, the diagnosis is asthma even if the patient does not have fully reversible airflow obstruction. Pharmacological therapy in patients with late-onset asthma follows international guidelines, including treatment with the lowest effective dose of inhaled corticosteroid to minimize...

Testing of motor unit synchronization model for localized muscle fatigue.

Science.gov (United States)

Naik, Ganesh R; Kumar, Dinesh K; Yadav, Vivek; Wheeler, Katherine; Arjunan, Sridhar

2009-01-01

Spectral compression of surface electromyogram (sEMG) is associated with onset of localized muscle fatigue. The spectral compression has been explained based on motor unit synchronization theory. According to this theory, motor units are pseudo randomly excited during muscle contraction, and with the onset of muscle fatigue the recruitment pattern changes such that motor unit firings become more synchronized. While this is widely accepted, there is little experimental proof of this phenomenon. This paper has used source dependence measures developed in research related to independent component analysis (ICA) to test this theory.

Differences in disease features between childhood-onset and adult-onset systemic lupus erythematosus patients presenting with acute abdominal pain.

Science.gov (United States)

Tu, Yu-Ling; Yeh, Kuo-Wei; Chen, Li-Chen; Yao, Tsung-Chieh; Ou, Liang-Shiou; Lee, Wen-I; Huang, Jing-Long

2011-04-01

Abdominal pain in systemic lupus erythematosus (SLE) patients has rarely been analyzed in pediatric populations. We planned to investigate the potential differences between childhood-onset and adult-onset SLE patients who were hospitalized because of acute abdominal pain. A retrospective study including 23 childhood-onset SLE patients with 38 admissions and 88 adult-onset SLE patients with 108 admissions from 1999 to 2008 were conducted in our hospital. All of them had the chief complaint of diffuse abdominal pain. The etiologies of acute abdominal pain in adult-onset SLE patients were more diverse than childhood-onset SLE patients. The most common cause of acute abdominal pain in SLE patients was lupus mesenteric vasculitis (LMV) (18.5%), followed by acute gastroenteritis (14.4%), pancreatitis (10.3%), appendicitis (7.5%), and cholecystitis (6.2%). Compared with adults, children were admitted more often due to LMV (31.6% versus 13.9%; P = 0.016), had more frequently recurrent episodes (39.1% versus 14.8%; P = 0.009), and were more often treated with immunosuppressive agents (31.6% versus 7.4%; P abdominal pain should be considered in SLE patients. LMV is the most common cause of acute abdomen in childhood-onset SLE patients with low mortality and morbidity provided by prompt diagnosis and timely administration of high-dose intravenous corticosteroids after excluding real surgical abdomen. Crown Copyright © 2011. Published by Elsevier Inc. All rights reserved.

Late onset depression: A recent update

Directory of Open Access Journals (Sweden)

Ananya Mahapatra

2015-01-01

Full Text Available Late onset depression has recently emerged as a serious mental health issue in the geriatric population with significant public health implications. It is often challenging to diagnose and treat this entity. Various theories have been postulated to elucidate the etiology of late onset depression, but a unifying hypothesis is lacking. Although the vascular hypothesis is most researched; a complex interaction of multiple vulnerability factors is the current focus of attention. Numerous psychosocial variables have been implicated to play a significant role in predicting the onset and severity of late-life depression. Phenomenological differences have been delineated from depression occurring at a younger age, but the findings are equivocal. A better understanding of the natural trajectory of depression in the elderly is required for early diagnosis and effective treatment. This review attempts to summarize the current status of evidence regarding epidemiology, etiology, clinical features, and treatment options available for late-onset depression.

X-linked adult-onset adrenoleukodystrophy: Psychiatric and neurological manifestations.

Science.gov (United States)

Shamim, Daniah; Alleyne, Karen

2017-01-01

Adult-onset adrenoleukodystrophy is a rare x-linked inborn error of metabolism occurring predominantly in males with onset in early 30s. Here, we report a 34-year-old male with first signs of disease in early 20s manifesting as a pure psychiatric disorder. Prior to onset of neurological symptoms, this patient demonstrated a schizophrenia and bipolar-like presentation. The disease progressed over the next 10-13 years and his memory and motor problems became evident around the age of 33 years. Subsequently, diagnostic testing showed the typical magnetic resonance imaging and lab findings for adult-onset adrenoleukodystrophy. This case highlights adult-onset adrenoleukodystrophy which may present as a pure psychiatric disturbance in early adulthood and briefly discusses the prolonged time between the onset of psychiatric symptoms and the onset of neurological disease.

Estrogen and early-onset Alzheimer's disease

NARCIS (Netherlands)

A.J.C. Slooter (Arjen); J.B. Bronzova (Juliana); A. Hofman (Albert); C. van Broeckhoven (Christine); C.M. van Duijn (Cornelia); J.C.M. Witteman (Jacqueline)

1999-01-01

textabstractEstrogen use may be protective for Alzheimer's disease with late onset. However, the effects on early onset Alzheimer's disease are unclear. This issue was studied in a population based setting. For each female patient, a female control was matched on age (within 5 years) and place of

The association between prolonged sleep onset latency and heart rate dynamics among young sleep-onset insomniacs and good sleepers.

Science.gov (United States)

Tsai, Hsin-Jung; Kuo, Terry B J; Lin, Yu-Cheng; Yang, Cheryl C H

2015-12-30

A blunting of heart rate (HR) reduction during sleep has been reported to be associated with increased all-cause mortality. An increased incident of cardiovascular events has been observed in patients with insomnia but the relationship between nighttime HR and insomnia remains unclear. Here we investigated the HR patterns during the sleep onset period and its association with the length of sleep onset latency (SOL). Nineteen sleep-onset insomniacs (SOI) and 14 good sleepers had their sleep analyzed. Linear regression and nonlinear Hilbert-Huang transform (HHT) of the HR slope were performed in order to analyze HR dynamics during the sleep onset period. A significant depression in HR fluctuation was identified among the SOI group during the sleep onset period when linear regression and HHT analysis were applied. The magnitude of the HR reduction was associated with both polysomnography-defined and subjective SOL; moreover, we found that the linear regression and HHT slopes of the HR showed great sensitivity with respect to sleep quality. Our findings indicate that HR dynamics during the sleep onset period are sensitive to sleep initiation difficulty and respond to the SOL, which indicates that the presence of autonomic dysfunction would seem to affect the progress of falling asleep. Copyright © 2015. Published by Elsevier Ireland Ltd.

Stimulus-driven attentional capture by subliminal onset cues

NARCIS (Netherlands)

Schoeberl, T.; Fuchs, I.; Theeuwes, J.; Ansorge, U.

2015-01-01

In two experiments, we tested whether subliminal abrupt onset cues capture attention in a stimulus-driven way. An onset cue was presented 16 ms prior to the stimulus display that consisted of clearly visible color targets. The onset cue was presented either at the same side as the target (the valid

Different Profile of Serum Leptin between Early Onset and Late Onset Preeclampsia

Directory of Open Access Journals (Sweden)

Saeedeh Salimi

2014-01-01

Full Text Available Aim. This study was designed to clarify the role of leptin and adiponectin in preeclampsia (PE pathogenesis and different subtypes of preeclampsia. Method. This case control study was performed in 45 PE patients and 45 healthy controls matched for age, BMI, and ethnicity. Serum leptin and adiponectin levels were determined by enzyme linked immunosorbent assay (ELISA. Results. Maternal serum leptin and adiponectin were significantly higher in PE women than controls. Serum leptin was elevated in early onset preeclampsia (EOPE and late onset preeclampsia (LOPE compared to controls. Among PE patients, serum leptin was higher in EOPE than LOPE women. However, serum adiponectin was not different between EOPE and LOPE women. The serum leptin was significantly higher in severe PE than mild PE. The serum adiponectin was significantly elevated in severe PE compared to controls. Significant positive correlation was observed between leptin and adiponectin and also between leptin and BMI in controls. Moreover significant positive correlation was observed between adiponectin and BMI in PE patients and controls. Conclusion. The present study showed that serum leptin level may play a significant role as a biomarker to differentiate early and late onset PE and also its relation to BMI and severity of disease.

Decision making and executive function in male adolescents with early-onset or adolescence-onset conduct disorder and control subjects.

Science.gov (United States)

Fairchild, Graeme; van Goozen, Stephanie H M; Stollery, Sarah J; Aitken, Michael R F; Savage, Justin; Moore, Simon C; Goodyer, Ian M

2009-07-15

Although conduct disorder (CD) is associated with an increased susceptibility to substance use disorders, little is known about decision-making processes or reward mechanisms in CD. This study investigated decision making under varying motivational conditions in CD. Performances on the Risky Choice Task (RCT) and the Wisconsin Card Sorting Test (WCST) were assessed in 156 adolescents (84 control subjects, 34 with adolescence-onset CD, and 38 with early-onset CD). The RCT was performed twice, once under normal motivational conditions and once under conditions of increased motivation and psychosocial stress. Increased motivation and stress led to more cautious decision making and changes in framing effects on the RCT in all groups, although such effects were least pronounced in the early-onset CD group. Participants from both CD subgroups selected the risky choice more frequently than control subjects. Under normal motivational conditions, early-onset CD participants chose the risky choice more frequently in trials occurring after small gains, relative to control subjects and adolescence-onset CD participants. Following adjustment for IQ differences, the groups did not differ significantly in terms of WCST performance. Differences in decision making between control subjects and individuals with CD suggest that the balance between sensitivity to reward and punishment is shifted in this disorder, particularly the early-onset form. Our data on modulation of decision making according to previous outcomes suggest altered reward mechanisms in early-onset CD. The WCST data suggest that impairments in global executive function do not underlie altered decision making in CD.

Admixture analysis of age of onset in generalized anxiety disorder.

Science.gov (United States)

Rhebergen, Didi; Aderka, Idan M; van der Steenstraten, Ira M; van Balkom, Anton J L M; van Oppen, Patricia; Stek, Max L; Comijs, Hannie C; Batelaan, Neeltje M

2017-08-01

Age of onset is a marker of clinically relevant subtypes in various medical and psychiatric disorders. Past research has also reported that age of onset in generalized anxiety disorder (GAD) is clinically significant; but, in research to date, arbitrary cut-off ages have been used. In the present study, admixture analysis was used to determine the best fitting model for age of onset distribution in GAD. Data were derived from 459 adults with a diagnosis of GAD who took part in the Netherlands Study of Depression and Anxiety (NESDA). Associations between age of onset subtypes, identified by admixture analysis, and sociodemographic, clinical, and vulnerability factors were examined using univariate tests and multivariate logistic regression analyses. Two age of onset distributions were identified: an early-onset group (24 years of age and younger) and a late-onset group (greater than 24 years of age). Multivariate analysis revealed that early-onset GAD was associated with female gender (OR 2.1 (95%CI 1.4-3.2)), higher education (OR 1.1 (95%CI 1.0-1.2)), and higher neuroticism (OR 1.4 (95%CI 1.1-1.7)), while late-onset GAD was associated with physical illnesses (OR 1.3 (95%CI 1.1-1.7)). Study limitations include the possibility of recall bias given that age of onset was assessed retrospectively, and an inability to detect a possible very-late-onset GAD subtype. Collectively, the results of the study indicate that GAD is characterized by a bimodal age of onset distribution with an objectively determined early cut-off at 24 years of age. Early-onset GAD is associated with unique factors that may contribute to its aetiology; but, it does not constitute a more severe subtype compared to late-onset GAD. Future research should use 24 years of age as the cut-off for early-onset GAD to when examining the clinical relevance of age of onset for treatment efficacy and illness course. Copyright © 2017 Elsevier Ltd. All rights reserved.

Early-onset obsessive-compulsive disorder and personality disorders in adulthood.

Science.gov (United States)

Maina, Giuseppe; Albert, Umberto; Salvi, Virginio; Pessina, Enrico; Bogetto, Filippo

2008-03-15

Obsessive-compulsive disorder (OCD) often emerges in childhood or adolescence. The aim of the present study was to evaluate whether adult patients with prepuberal onset differ from subjects with later onset in terms of personality disorder comorbidity. The Structured Clinical Interview for DSM-IV Axis II Disorders was used to assess 148 patients with a principal diagnosis of OCD according to the Structured Clinical Interview for DSM-IV Axis I Disorders. The following two subgroups of subjects were selected according to the age at onset of symptomatology: patients with an early-onset ( or =17 years). Of the 148 patients screened for the present study, 33 (22.3%) had an early onset and 1369 (46.6%) had a later onset. With regard to personality disorders, early-onset patients showed more OC personality disorders (OCPD) than later onset patients. Our finding suggests that OCD in childhood increases the risk for developing OCPD in adulthood, or that early-onset OCD and OCPD share a common pathogenesis.

Hypothyroidism in late-onset Pompe disease.

Science.gov (United States)

Schneider, Joseph; Burmeister, Lynn A; Rudser, Kyle; Whitley, Chester B; Jarnes Utz, Jeanine

2016-09-01

In Pompe disease, a deficiency of acid α-glucosidase enzyme activity leads to pathologic accumulation of glycogen in tissues. Phenotype heterogeneity in Pompe includes an infantile form and late-onset forms (juvenile- and adult-onset forms). Symptoms common to all phenotypes include progressive muscle weakness and worsening respiratory function. Patients with late-onset forms of Pompe disease commonly complain of chronic fatigue and generalized muscle weakness prior to being diagnosed with Pompe disease, and this may lead to consideration of hypothyroidism in the differential diagnosis. This study aimed to evaluate the prevalence of hypothyroidism in the adult-onset form of Pompe disease. Electronic chart review was performed at the Advanced Therapies Clinic at the University of Minnesota Medical Center (UMMC) to identify patients with late-onset Pompe disease. The identified charts were reviewed for a co-diagnosis of hypothyroidism. A query was made to the clinical data repository at UMMC searching diagnosis ICD9 code 244.9 (hypothyroidism not otherwise specified) and/or presence of levothyroxine from 2011 to 2014 in patients 18 years of age and older. The clinical data repository found a prevalence of hypothyroidism of 3.15% (56,072 of 1,782,720 patients) in the adult patient population at UMMC. Ten adult patients with Pompe disease were identified, five with the diagnosis of hypothyroidism (50%, 95% CI: 23.7, 76.3, p Hypothyroidism was found at a higher prevalence in patients with late-onset Pompe disease compared to the general adult population at UMMC. Studies in larger populations of patients with Pompe disease would be needed to confirm an association of Pompe disease and hypothyroidism. Challenges include finding an adequate sample size, due the rarity of Pompe disease.

Late-onset ADHD in adults: milder, but still dysfunctional.

Science.gov (United States)

Karam, Rafael G; Bau, Claiton H D; Salgado, Carlos A I; Kalil, Katiane L S; Victor, Marcelo M; Sousa, Nyvia O; Vitola, Eduardo S; Picon, Felipe A; Zeni, Gregory D; Rohde, Luis A; Belmonte-de-Abreu, Paulo; Grevet, Eugenio H

2009-04-01

The requirement in classificatory systems that some impairment from attention-deficit/hyperactivity disorder (ADHD) symptoms starts before 7 years of age (age of onset of impairment criteria - AOC) has been harshly criticized. Although there is evidence that late-onset ADHD is a valid diagnosis, little is known about the role of age of onset of impairment on the clinical profile of adult patients. The diagnoses of 349 adults with ADHD followed DSM-IV criteria. ADHD and oppositional defiant disorder (ODD) were evaluated with the K-SADS-E, and other comorbidities with the SCID-IV and the MINI. Subjects were divided in early and late-onset groups (age of onset of impairment between 7 and 12 years old). The effect of age of onset over clinical and demographic characteristics was tested by regression models. Late-onset subjects were diagnosed later (P=0.04), had a lower frequency of problems with authority and discipline (P=0.004), and lower scores in SNAP-IV (Pactivities (P=0.03). On the other hand, late-onset patients presented a higher prevalence of comorbid general anxiety disorder (GAD) (P=0.01). Both groups had a similar profile in the remaining comorbidities and sociodemographic characteristics. This study provides initial evidence that adults with late-onset ADHD have less severity, lower frequency of externalizing symptoms and increased comorbidity with GAD, but similar profile in other comorbidities. In addition, the data suggest that late-onset patients have a higher probability of delayed diagnosis despite the significant impairment of their condition.

Two Sides of the Same Coin: Pediatric-Onset and Adult-Onset Common Variable Immune Deficiency.

Science.gov (United States)

Sanchez, Lauren A; Maggadottir, Solrun Melkorka; Pantell, Matthew S; Lugar, Patricia; Rundles, Charlotte Cunningham; Sullivan, Kathleen E

2017-08-01

Common variable immunodeficiency (CVID) is a complex, heterogeneous immunodeficiency characterized by hypogammaglobulinemia, recurrent infections, and poor antibody response to vaccination. While antibiotics and immunoglobulin prophylaxis have significantly reduced infectious complications, non-infectious complications of autoimmunity, inflammatory lung disease, enteropathy, and malignancy remain of great concern. Previous studies have suggested that CVID patients diagnosed in childhood are more severely affected by these complications than adults diagnosed later in life. We sought to discern whether the rates of various infectious and non-infectious conditions differed between pediatric-diagnosed (ages 17 or younger) versus adult-diagnosed CVID (ages 18 or older). Using the United States Immunodeficiency Network (USIDNET) database, we performed a retrospective analysis of 457 children and adults with CVID, stratified by age at diagnosis. Chi-squared testing was used to compare pediatric versus adult groups. After correcting for multiple comparisons, we identified few statistically significant differences (p ≤ 0.0004) between pediatric and adult groups. Pediatric-onset CVID patients had more frequent diagnoses of otitis media, developmental delay, and failure to thrive compared with adult-onset CVID patients. Adult CVID patients were more frequently diagnosed with bronchitis, arthritis, depression, and fatigue. Diagnoses of autoimmunity, lymphoma, and other malignancies were higher in adults but not to a significant degree. Serum immunoglobulins (IgG, IgA, and IgM) and lymphocyte subsets did not differ significantly between the two groups. When complications of infections and co-morbid conditions were viewed categorically, there were few differences between pediatric-onset and adult-onset CVID patients. These results suggest that pediatric CVID is not a distinct phenotype. Major features were comparable across the groups. This study underscores the need for

Evidence for a genetic etiology of early-onset delinquency.

Science.gov (United States)

Taylor, J; Iacono, W G; McGue, M

2000-11-01

Age at onset of antisocial behavior discriminates persistent and transitory offenders. The authors proposed that early-onset delinquency has an underlying genetic influence that manifests in problems related to inhibition, whereas late-onset delinquency is more environmentally mediated. To test these notions, they selected 36 early starters, 86 late starters, and 25 nondelinquent controls from a large sample of 11-year-old twins and compared them on several measures related to inhibition and a peer group measure. As expected, early starters had more psychological, behavioral, and emotional problems related to inhibition than late starters and controls. A longitudinal analysis indicated an increase an antisocial behavior among peers of late starters shortly before their delinquency onset. Family history data and a twin analysis provided evidence of greater genetic influence on early-onset than late-onset delinquency.

Origin of frontal lobe spikes in the early onset benign occipital lobe epilepsy (Panayiotopoulos syndrome).

Science.gov (United States)

Leal, Alberto J R; Ferreira, José C; Dias, Ana I; Calado, Eulália

2008-09-01

Early onset benign occipital lobe epilepsy (Panayiotopoulos syndrome [PS]) is a common and easily recognizable epilepsy. Interictal EEG spike activity is often multifocal but most frequently localized in the occipital lobes. The origin and clinical significance of the extra-occipital spikes remain poorly understood. Three patients with the PS and interictal EEG spikes with frontal lobe topography were studied using high-resolution EEG. Independent component analysis (ICA) was used to decompose the spikes in components with distinct temporal dynamics. The components were mapped in the scalp with a spline-laplacian algorithm. The change in scalp potential topography from spike onset to peak, suggests the contribution of several intracranial generators, with different kinetics of activation and significant overlap. ICA was able to separate the major contributors to frontal spikes and consistently revealed an early activating group of components over the occipital areas in all the patients. The local origin of these early potentials was established by the spline-laplacian montage. Frontal spikes in PS are consistently associated with early and unilateral occipital lobe activation, suggesting a postero-anterior spike propagation. Frontal spikes in the PS represent a secondary activation triggered by occipital interictal discharges and do not represent an independent focus.

Attention capture by abrupt onsets: re-visiting the priority tag model

Directory of Open Access Journals (Sweden)

Meera Mary Sunny

2013-12-01

Full Text Available Abrupt onsets have been shown to strongly attract attention in a stimulus-driven, bottom-up manner. However, the precise mechanism that drives capture by onsets is still debated. According to the new object account, abrupt onsets capture attention because they signal the appearance of a new object. Yantis and Johnson (1990 used a visual search task and showed that up to four onsets can be automatically prioritized. However, in their study the number of onsets co-varied with the total number of items in the display, allowing for a possible confound between these two variables. In the present study, display size was fixed at eight items while the number of onsets was systematically varied between zero and eight. Experiment 1 showed a systematic increase in reactions times with increasing number of onsets. This increase was stronger when the target was an onset than when it was a no-onset item, a result that is best explained by a model according to which only one onset is automatically prioritized. Even when the onsets were marked in red (Experiment 2, nearly half of the participants continued to prioritize only one onset item. Only when onset and no-onset targets were blocked (Experiment 3, participants started to search selectively through the set of only the relevant target type. These results further support the finding that only one onset captures attention. Many bottom-up models of attention capture, like masking or saliency accounts, can efficiently explain this finding.

Attention capture by abrupt onsets: re-visiting the priority tag model.

Science.gov (United States)

Sunny, Meera M; von Mühlenen, Adrian

2013-01-01

Abrupt onsets have been shown to strongly attract attention in a stimulus-driven, bottom-up manner. However, the precise mechanism that drives capture by onsets is still debated. According to the new object account, abrupt onsets capture attention because they signal the appearance of a new object. Yantis and Johnson (1990) used a visual search task and showed that up to four onsets can be automatically prioritized. However, in their study the number of onsets co-varied with the total number of items in the display, allowing for a possible confound between these two variables. In the present study, display size was fixed at eight items while the number of onsets was systematically varied between zero and eight. Experiment 1 showed a systematic increase in reactions times with increasing number of onsets. This increase was stronger when the target was an onset than when it was a no-onset item, a result that is best explained by a model according to which only one onset is automatically prioritized. Even when the onsets were marked in red (Experiment 2), nearly half of the participants continued to prioritize only one onset item. Only when onset and no-onset targets were blocked (Experiment 3), participants started to search selectively through the set of only the relevant target type. These results further support the finding that only one onset captures attention. Many bottom-up models of attention capture, like masking or saliency accounts, can efficiently explain this finding.

Nanomechanical and in situ TEM characterization of boron carbide thin films on helium implanted substrates: Delamination, real-time cracking and substrate buckling

Energy Technology Data Exchange (ETDEWEB)

Framil Carpeño, David, E-mail: david.framil-carpeno@auckland.ac.nz [Department of Chemical and Materials Engineering, The University of Auckland, 20 Symonds Street, Auckland 1010 (New Zealand); Ohmura, Takahito; Zhang, Ling [Strength Design Group, Structural Materials Unit, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Leveneur, Jérôme [National Isotope Centre, GNS Science, 30 Gracefield Road, Gracefield, Lower Hutt 5010 (New Zealand); Dickinson, Michelle [Department of Chemical and Materials Engineering, The University of Auckland, 20 Symonds Street, Auckland 1010 (New Zealand); Seal, Christopher [International Centre for Advanced Materials, The University of Manchester, Oxford Road, Manchester M13 9PL (United Kingdom); Kennedy, John [National Isotope Centre, GNS Science, 30 Gracefield Road, Gracefield, Lower Hutt 5010 (New Zealand); Hyland, Margaret [Department of Chemical and Materials Engineering, The University of Auckland, 20 Symonds Street, Auckland 1010 (New Zealand)

2015-07-15

Boron carbide coatings deposited on helium-implanted and unimplanted Inconel 600 were characterized using a combination of nanoindentation and transmission electron microscopy. Real-time coating, cracking and formation of slip bands were recorded using in situ TEM-nanoindentation, allowing site specific events to be correlated with specific features in their load–displacement curves. Cross-sections through the residual indent impression showed a correlation between pop-outs in the load–displacement curves and coating delamination, which was confirmed with cyclic indentation experiments. Inconel exhibits (-11-1) and (1-1-1) twin variants in its deformed region beneath the indenter, organized in bands with a ladder-like arrangement. The nanomechanical properties of the metal–ceramic coating combinations exhibit a marked substrate effect as a consequence of helium implantation.

Nanomechanical and in situ TEM characterization of boron carbide thin films on helium implanted substrates: Delamination, real-time cracking and substrate buckling

International Nuclear Information System (INIS)

Framil Carpeño, David; Ohmura, Takahito; Zhang, Ling; Leveneur, Jérôme; Dickinson, Michelle; Seal, Christopher; Kennedy, John; Hyland, Margaret

2015-01-01

Boron carbide coatings deposited on helium-implanted and unimplanted Inconel 600 were characterized using a combination of nanoindentation and transmission electron microscopy. Real-time coating, cracking and formation of slip bands were recorded using in situ TEM-nanoindentation, allowing site specific events to be correlated with specific features in their load–displacement curves. Cross-sections through the residual indent impression showed a correlation between pop-outs in the load–displacement curves and coating delamination, which was confirmed with cyclic indentation experiments. Inconel exhibits (-11-1) and (1-1-1) twin variants in its deformed region beneath the indenter, organized in bands with a ladder-like arrangement. The nanomechanical properties of the metal–ceramic coating combinations exhibit a marked substrate effect as a consequence of helium implantation

Sensorimotor oscillations prior to speech onset reflect altered motor networks in adults who stutter

Directory of Open Access Journals (Sweden)

Anna-Maria Mersov

2016-09-01

Full Text Available Adults who stutter (AWS have demonstrated atypical coordination of motor and sensory regions during speech production. Yet little is known of the speech-motor network in AWS in the brief time window preceding audible speech onset. The purpose of the current study was to characterize neural oscillations in the speech-motor network during preparation for and execution of overt speech production in AWS using magnetoencephalography (MEG. Twelve AWS and twelve age-matched controls were presented with 220 words, each word embedded in a carrier phrase. Controls were presented with the same word list as their matched AWS participant. Neural oscillatory activity was localized using minimum-variance beamforming during two time periods of interest: speech preparation (prior to speech onset and speech execution (following speech onset. Compared to controls, AWS showed stronger beta (15-25Hz suppression in the speech preparation stage, followed by stronger beta synchronization in the bilateral mouth motor cortex. AWS also recruited the right mouth motor cortex significantly earlier in the speech preparation stage compared to controls. Exaggerated motor preparation is discussed in the context of reduced coordination in the speech-motor network of AWS. It is further proposed that exaggerated beta synchronization may reflect a more strongly inhibited motor system that requires a stronger beta suppression to disengage prior to speech initiation. These novel findings highlight critical differences in the speech-motor network of AWS that occur prior to speech onset and emphasize the need to investigate further the speech-motor assembly in the stuttering population.

Delamination of plasters applied to historical masonry walls: analysis by acoustic emission technique and numerical model

Science.gov (United States)

Grazzini, A.; Lacidogna, G.; Valente, S.; Accornero, F.

2018-06-01

Masonry walls of historical buildings are subject to rising damp effects due to capillary or rain infiltrations, which in the time produce decay and delamination of historical plasters. In the restoration of masonry buildings, the plaster detachment frequently occurs because of mechanical incompatibility in repair mortar. An innovative laboratory procedure is described for test mechanical adhesion of new repair mortars. Compression static tests were carried out on composite specimens stone block-repair mortar, which specific geometry can test the de-bonding process of mortar in adherence with a stone masonry structure. The acoustic emission (AE) technique was employed for estimating the amount of energy released from fracture propagation in adherence surface between mortar and stone. A numerical simulation was elaborated based on the cohesive crack model. The evolution of detachment process of mortar in a coupled stone brick-mortar system was analysed by triangulation of AE signals, which can improve the numerical model and predict the type of failure in the adhesion surface of repair plaster. Through the cohesive crack model, it was possible to interpret theoretically the de-bonding phenomena occurring at the interface between stone block and mortar. Therefore, the mechanical behaviour of the interface is characterized.

Unclear-onset intracerebral hemorrhage: Clinical characteristics, hematoma features, and outcomes.

Science.gov (United States)

Inoue, Yasuteru; Miyashita, Fumio; Koga, Masatoshi; Minematsu, Kazuo; Toyoda, Kazunori

2017-12-01

Background and purpose Although unclear-onset ischemic stroke, including wake-up ischemic stroke, is drawing attention as a potential target for reperfusion therapy, acute unclear-onset intracerebral hemorrhage has been understudied. Clinical characteristics, hematoma features, and outcomes of patients who developed intracerebral hemorrhage during sleep or those with intracerebral hemorrhage who were unconscious when witnessed were determined. Methods Consecutive intracerebral hemorrhage patients admitted within 24 hours after onset or last-known normal time were classified into clear-onset intracerebral hemorrhage and unclear-onset intracerebral hemorrhage groups. Outcomes included initial hematoma volume, initial National Institutes of Health Stroke Scale score, hematoma growth on 24-hour follow-up computed tomography, and vital and functional prognoses at 30 days. Results Of 377 studied patients (122 women, 69 ± 11 years old), 147 (39.0%) had unclear-onset intracerebral hemorrhage. Patients with unclear-onset intracerebral hemorrhage had larger hematoma volumes (p = 0.044) and higher National Institutes of Health Stroke Scale scores (p Hematoma growth was similarly common between the two groups (p = 0.176). There were fewer patients with modified Rankin Scale (mRS) scores of 0-2 (p = 0.033) and more patients with mRS scores of 5-6 (p = 0.009) and with fatal outcomes (p = 0.049) in unclear-onset intracerebral hemorrhage group compared with clear-onset intracerebral hemorrhage as crude values, but not after adjustment. Conclusions Patients with unclear-onset intracerebral hemorrhage presented with larger hematomas and higher National Institutes of Health Stroke Scale scores at emergent visits than those with clear-onset intracerebral hemorrhage, independent of underlying characteristics. Unclear-onset intracerebral hemorrhage patients showed poorer 30-day vital and functional outcomes than clear-onset intracerebral hemorrhage patients

Forecasting The Onset Of The East African Rains

Science.gov (United States)

MacLeod, D.; Palmer, T.

2017-12-01

The timing of the rainy seasons is critical for East Africa, where many livelihoods depend on rain-fed agriculture. The exact onset date of the rains varies from year to year and a delayed start has significant implications for food security. Early warning of anomalous onset can help mitigate risks by informing farmer decisions on crop choice and timing of planting. Onset forecasts may also pre-warn governments and NGOs of upcoming need for financial support and humanitarian intervention. Here we assess the potential to forecast the onset of both the short and long rains over East Africa at subseasonal to seasonal timescales. Based on operational reforecasts from ECMWF, we will demonstrate skilful prediction of onset anomalies. An investigation to determine potential sources of this forecast skill will also be presented. This work has been carried out as part of the project ForPAc: "Towards forecast-based preparedness action".

Factors relating to age of onset in autism.

Science.gov (United States)

Short, A B; Schopler, E

1988-06-01

We examined the distribution of ages of onset of autism and related communication handicaps and assessed factors related to age of onset. Subjects were approximately 1,800 children seen at Division TEACCH (Treatment and Education of Autistic and related Communication handicapped CHildren) since 1970. Exact numbers of subjects varied with different analyses due to missing data. Data were gathered through direct assessment, interview, and questionnaire. Seventy-six percent of autistic children were identified by parents by 24 months of age, and 94% by 36 months. Families reporting early onset tended to seek help sooner and to be seen by TEACCH sooner. Early onset was most clearly related to severity as measured by IQ and ratings on the Childhood Autism Rating Scale (Schopler, Reichler, & Renner, 1986). The findings support the treatment of age of onset of autism by DSM-III-R (American Psychiatric Association, 1987).

Meteorological context of the onset and end of the rainy season in Central Amazonia during the GoAmazon2014/5

Directory of Open Access Journals (Sweden)

J. A. Marengo

2017-06-01

Full Text Available The onset and demise of the rainy season in Amazonia are assessed in this study using meteorological data from the GoAmazon experiment, with a focus on the 2014–2015 rainy season. In addition, global reanalyses are also used to identify changes in circulation leading to the establishment of the rainy season in the region. Our results show that the onset occurred in January 2015, 2–3 pentads later than normal, and the rainy season during the austral summer of 2015 contained several periods with consecutive dry days in both Manacapuru and Manaus, which are not common for the wet season, and resulted in below-normal precipitation. The onset of the rainy season has been strongly associated with changes in large-scale weather conditions in the region due to the effect of the Madden–Julian Oscillation (MJO. Regional thermodynamic indices and the height of the boundary layer did not present a significant difference between the onset and demise of the wet season of 2015. This suggests that local changes, such as those in the regional thermodynamic characteristics, may not have influenced its onset. Thus, variability of the large-scale circulation was responsible for regional convection and rainfall changes in Amazonia during the austral summer of 2014–2015.

Prevalence of Comorbidity in Patients With Young-Onset Alzheimer Disease Compared With Late-Onset: A Comparative Cohort Study

NARCIS (Netherlands)

Gerritsen, A.A.J.; Bakker, C.; Verhey, F.R.J.; Vugt, M.E. de; Melis, R.J.; Koopmans, R.T.

2016-01-01

OBJECTIVES: With the lack of a cure for Alzheimer disease (AD), the identification of comorbidity is important to reduce the possibility of excess disability. Although comorbidity in patients with late-onset AD (LO-AD) is common, for people with young-onset AD (YO-AD), it is unclear how often

Development of an Acoustic Localization Method for Cavitation Experiments in Reverberant Environments

Science.gov (United States)

Ranjeva, Minna; Thompson, Lee; Perlitz, Daniel; Bonness, William; Capone, Dean; Elbing, Brian

2011-11-01

Cavitation is a major concern for the US Navy since it can cause ship damage and produce unwanted noise. The ability to precisely locate cavitation onset in laboratory scale experiments is essential for proper design that will minimize this undesired phenomenon. Measuring the cavitation onset is more accurately determined acoustically than visually. However, if other parts of the model begin to cavitate prior to the component of interest the acoustic data is contaminated with spurious noise. Consequently, cavitation onset is widely determined by optically locating the event of interest. The current research effort aims at developing an acoustic localization scheme for reverberant environments such as water tunnels. Currently cavitation bubbles are being induced in a static water tank with a laser, allowing the localization techniques to be refined with the bubble at a known location. The source is located with the use of acoustic data collected with hydrophones and analyzed using signal processing techniques. To verify the accuracy of the acoustic scheme, the events are simultaneously monitored visually with the use of a high speed camera. Once refined testing will be conducted in a water tunnel. This research was sponsored by the Naval Engineering Education Center (NEEC).

Localization in small fcc-particles with surface irregularities and disorder

International Nuclear Information System (INIS)

Bucher, J.P.; Bloomfield, L.A.

1991-01-01

A numerical eigenvector analysis is used to investigate Anderson localization in small fcc-particles of N = 309 and N = 147 atoms. Special attention is given to the way size and surface roughness of the particles influence the localization behavior. States begin to localize in a non-exponential regime several lattice spacings from the center of localization and finally converge to a fully exponentially-localized regime for strong disorder. For smooth surface particles, it is found that the states localize first at the band bottom and a mobility edge can clearly be defined for increasing disorder. This doesn't seem to be the case for the rougher particles, where the band middle and the band bottom show similar behavior towards localization. Although particles with surface irregularities show an onset of localization for smaller values of the disorder than smooth particles, the localization length is greater. (orig.)

Tourette syndrome and comorbid early-onset schizophrenia.

Science.gov (United States)

Kerbeshian, Jacob; Peng, Chun-Zi; Burd, Larry

2009-12-01

A study of the shared phenomenology between Tourette syndrome (TS) and schizophrenia. An illustrative case report is presented. We used a chart review of 399 clinically ascertained patients with TS to identify 10 cases meeting criteria for schizophrenia. From our 10 patients, salient clinical characteristics were then tabulated. We then extracted similar clinical characteristics from a previously published series of patients with comorbid TS and schizophrenia in order to combine cases and allow for a comparison between childhood-onset schizophrenia (COS), adolescent-onset schizophrenia (AdolOS), and adult-onset schizophrenia (AduOS) cases in these groups. We found 10 cases of schizophrenia (all were males) in the 399 TS patients for a prevalence rate of 2.5% (95% CI 0.96-4.04). Mean age of tic onset for TS diagnostic criteria ranged from 2-14 years with a mean of 8.2 years. The mean age of diagnosis for schizophrenia was 14.2 (range 9-23 years). We found six cases of schizophrenia with onset of positive psychotic symptoms by 13 years of age, two cases with onset after 13 years of age and before 18 years of age, and two cases with onset after 18 years of age. Attention deficit hyperactivity disorder was present at a higher rate (70%) than one would expect in a clinically ascertained group of patients with TS. Comparison between COS, AdolOS and AduOS in our pooled cases noted a sex bias skewed toward males. Catatonic symptoms may be more likely in child or adolescent onset cases and negative symptoms more likely in AduOS cases. The 2.5% prevalence of schizophrenia in our TS sample exceeds the 1% expected rate of schizophrenia in the general population (chi-square=9.14; P=.0025). The six cases of COS (before 13 years of age) exceeds the expected rate of 1-2 per 100,000 (chi-square=4499; P=.0001). The 752-fold increase in observed rates of comorbid TS and COS over expected rates suggests a role for unknown common underlying etiologic factors. Based on clinical features

Effects of Melatonin and Bright Light Treatment in Childhood Chronic Sleep Onset Insomnia With Late Melatonin Onset: A Randomized Controlled Study.

Science.gov (United States)

van Maanen, Annette; Meijer, Anne Marie; Smits, Marcel G; van der Heijden, Kristiaan B; Oort, Frans J

2017-02-01

Chronic sleep onset insomnia with late melatonin onset is prevalent in childhood, and has negative daytime consequences. Melatonin treatment is known to be effective in treating these sleep problems. Bright light therapy might be an alternative treatment, with potential advantages over melatonin treatment. In this study, we compare the effects of melatonin and bright light treatment with a placebo condition in children with chronic sleep onset insomnia and late melatonin onset. Eighty-four children (mean age 10.0 years, 61% boys) first entered a baseline week, after which they received melatonin (N = 26), light (N = 30), or placebo pills (N = 28) for 3 to 4 weeks. Sleep was measured daily with sleep diaries and actigraphy. Before and after treatment children completed a questionnaire on chronic sleep reduction, and Dim Light Melatonin Onset (DLMO) was measured. Results were analyzed with linear mixed model analyses. Melatonin treatment and light therapy decreased sleep latency (sleep diary) and advanced sleep onset (sleep diary and actigraphy), although for sleep onset the effects of melatonin were stronger. In addition, melatonin treatment advanced DLMO and had positive effects on sleep latency and sleep efficiency (actigraphy data), and sleep time (sleep diary and actigraphy data). However, wake after sleep onset (actigraphy) increased with melatonin treatment. No effects on chronic sleep reduction were found. We found positive effects of both melatonin and light treatment on various sleep outcomes, but more and stronger effects were found for melatonin treatment. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

Relationship between acoustic voice onset and offset and selected instances of oscillatory onset and offset in young healthy males and females

Science.gov (United States)

Patel, Rita; Forrest, Karen; Hedges, Drew

2016-01-01

Objective To investigate the relationship between (1) onset of the acoustic signal and pre-phonatory phases associated with oscillatory onset and (2) offset of the acoustic signal with the post-phonatory events associated with oscillatory offset across vocally healthy adults. Subjects and Methods High-speed videoendoscopy was captured simultaneously with the acoustic signal during repeated production of /hi.hi.hi/ at typical pitch and loudness from 56 vocally healthy adults (age 20–42 years; 21 male, 35 female). The relationship between the acoustic sound pressure signal and oscillatory onset /offset events from the glottal area waveforms (GAW), were statistically investigated using a multivariate linear regression analysis. Results The onset of the acoustic signal (X1a) is a significant predictor of the onset of first oscillations (X1g) and onset of sustained oscillations (X2g). X1a as well as gender are significant predictors of the first instance of medial contact (X1.5g). The offset of the acoustic signal (X2a) is a significant predictor of the first instance of oscillatory offset (X3g), first instance of incomplete glottal closure (X3.5g), and cessation of vocal fold motion (X4g). Conclusions The acoustic signal onset is closely related to the first medial contact of the vocal folds but the latency between these events is longer for females compared to males. The offset of the acoustic signal occurs immediately after incomplete glottal adduction. The emerging normative group latencies between the onset/offset of the acoustic and the GAW from this study appear promising for future investigations. PMID:27769696

Aspiration, Localized Pulmonary Inflammation, and Predictors of Early-Onset Bronchiolitis Obliterans Syndrome after Lung Transplantation

Science.gov (United States)

Fisichella, P Marco; Davis, Christopher S; Lowery, Erin; Ramirez, Luis; Gamelli, Richard L; Kovacs, Elizabeth J

2014-01-01

BACKGROUND We hypothesized that immune mediator concentrations in the bronchoalveolar fluid (BALF) are predictive of bronchiolitis obliterans syndrome (BOS) and demonstrate specific patterns of dysregulation, depending on the presence of acute cellular rejection, BOS, aspiration, and timing of lung transplantation. STUDY DESIGN We prospectively collected 257 BALF samples from 105 lung transplant recipients. The BALF samples were assessed for absolute and differential white blood cell counts and 34 proteins implicated in pulmonary immunity, inflammation, fibrosis, and aspiration. RESULTS There were elevated BALF concentrations of interleukin (IL)-15, IL-17, basic fibroblast growth factor, tumor necrosis factor–α, and myeloperoxidase, and reduced concentrations of α1-antitrypsin, which were predictive of early-onset BOS. Patients with BOS had an increased percentage of BALF lymphocytes and neutrophils, with a reduced percentage of macrophages (p < 0.05). The BALF concentrations of IL-1β; IL-8; interferon-γ–induced protein 10; regulated upon activation, normal T-cell expressed and secreted; neutrophil elastase; and pepsin were higher in patients with BOS (p < 0.05). Among those with BOS, BALF concentrations of IL-1RA; IL-8; eotaxin; interferon-γ–induced protein 10; regulated upon activation, normal T-cell expressed and secreted; myeloperoxidase; and neutrophil elastase were positively correlated with time since transplantation (p < 0.01). Those with worse grades of acute cellular rejection had an increased percentage of lymphocytes in their BALF (p < 0.0001) and reduced BALF concentrations of IL-1β, IL-7, IL-9, IL-12, granulocyte colony-stimulating factor, granulocyte-macrophage colony-stimulating factor, interferon-γ, and vascular endothelial growth factor (p ≤ 0.001). Patients with aspiration based on detectable pepsin had increased percentage of neutrophils (p < 0.001) and reduced BALF concentrations of IL-12 (p < 0.001). CONCLUSIONS The BALF levels

Computed tomography of late-onset epilepsy

International Nuclear Information System (INIS)

Kim, Young Sik; Im, Jae Yung; Joo, Yang Goo; Park, Sam Kyoon

1982-01-01

Epilepsy can be divided into idiopathic epilepsy and symptomatic epilepsy according to the existence of underlying organic brain disease. It has been said that the incidence of the symptomatic epilepsy caused by underlying organic brain disease is higher in late-onset epilepsy after the age of 20 than in childhood-onset epilepsy. CT is very sensitive and non-invasive method for detection of organic brain disease. 168 cases of late-onset epilepsy after the age of of 20 were studied by CT in recent 2 years were analyzed. The results were as follows: 1. The 3rd decade was the most frequent age group, and the ratio of male to female was 2.5 : 1. 2. Structural abnormality on brain CT was demonstrated in 51.8% of the patient. 3. The older onset of age was, the higher the ratio of abnormal CT findings, except 5th decade which showed less CT abnormality than 4th decade. 4. The most frequent history related to epilepsy was trauma. 63.1% of patients had no relevant history: and they showed CT findings of brain tumor, atrophy and infraction in decreasing order of frequency. 5. Abnormal CT findings was demonstrated in 49.2% of normal neurologic examination and in 46.4% of normal EEG study. 6. The most frequent lesion of abnormal CT scan in late-onset epilepsy was 30 cases (18.4%) of brain atrophy. The next frequent lesion was 18 cases (10.7%) of brain tumor. Infarction, parasites and calcification were other frequent lesions

Delivery outcomes after day and night onset of labour.

Science.gov (United States)

Kanwar, Sandeep; Rabindran, Ranjit; Lindow, Stephen W

2015-11-01

To describe the outcome of night onset of labour as compared with the day onset of labour to investigate if labour that begins at night is more efficient. Retrospective review of labour and delivery data. A large United Kingdom maternity service. Over the period of 10 years, there were 30,022 deliveries, of which 19,842 were studied. A United Kingdom maternity department database was used to identify deliveries over a 10-year period, and the delivery outcomes were retrieved from these records. The 19,842 labours were divided into two categories: night onset (22.00-06.00 h) and day onset (10.00-18.00 h). Rates of operative intervention, augmentation, epidural usage and labour duration. A significant difference in delivery outcome was noted (P=0.004) with the night-onset labours having more normal deliveries (83.6% vs. 82.5%), fewer caesarean sections (8.7% vs. 10.1%), fewer labour augmentations with syntocinon (14.9% vs. 19.5%, Pnight-onset group and 2414 (30%) in the day-onset group (χ2=1.3, P=NS) Conclusions: Labours that start at night appear to be more efficient than labours that start during the day.

A novel CDKL5 mutation in a 47,XXY boy with the early-onset seizure variant of Rett syndrome.

Science.gov (United States)

Sartori, Stefano; Di Rosa, Gabriella; Polli, Roberta; Bettella, Elisa; Tricomi, Giovanni; Tortorella, Gaetano; Murgia, Alessandra

2009-02-01

Mutations of the cyclin-dependent kinase-like 5 gene (CDKL5), reported almost exclusively in female subjects, have been recently found to be the cause of a phenotype overlapping Rett syndrome with early-onset epileptic encephalopathy. We describe the first CDKL5 mutation detected in a male individual with 47,XXY karyotype. This previously unreported, de novo, mutation truncates the large CDKL5 COOH-terminal region, thought to be crucial for the proper sub-cellular localization of the CDKL5 protein. The resulting phenotype is characterized by a severe early-onset epileptic encephalopathy, global developmental delay, and profound intellectual and motor impairment with features reminiscent of Rett syndrome. In light of the data presented we discuss the possible phenotypic modulatory effects of the supernumerary wild type X allele and pattern of X chromosome inactivation and stress the importance of considering the causal involvement of CDKL5 in developmentally delayed males with early-onset seizures. (c) 2009 Wiley-Liss, Inc.

28 CFR 79.25 - Proof of onset of leukemia at least two years after first exposure, and proof of onset of a...

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Proof of onset of leukemia at least two... leukemia at least two years after first exposure, and proof of onset of a specified compensable disease more than five years after first exposure. The date of onset will be the date of diagnosis as indicated...

[Initial subretinal localization of acute myeloblastic leukemia (AML5) recurrence].

Science.gov (United States)

Le Gall, S; François, S; Urier, N; Genevieve, F; d'Hermies, F; Rachieru, P; Ifrah, N

2001-10-13

Reduced visual acuity in patients with acute leucemia can result from many causes including an ocular localization. A patient previously treated for acute myeloblastic leucemia-5 (AML5) developed bilateral vision impairment related to a subretinal localization of the leucemia. Meningeal and bone marrow relapse followed. The subretinal localization responded only to massive systemic steroid treatment. Although asymptomatic, ocular localizations are frequent in leucemia. Their prognostic impact depends on the ocular structure involved and on the chronology of onset--early or late in the leucemia course. The underlying pathophysiological mechanism of ocular involvement remains unexplained but hyperleucocytosis at presentation may be a risk factor and would justify at least systematic specialized examinations and discussion of prophylactic treatment.

Mutations of maturity-onset diabetes of the young (MODY) genes in Thais with early-onset type 2 diabetes mellitus.

Science.gov (United States)

Plengvidhya, Nattachet; Boonyasrisawat, Watip; Chongjaroen, Nalinee; Jungtrakoon, Prapaporn; Sriussadaporn, Sutin; Vannaseang, Sathit; Banchuin, Napatawn; Yenchitsomanus, Pa-thai

2009-06-01

Six known genes responsible for maturity-onset diabetes of the young (MODY) were analysed to evaluate the prevalence of their mutations in Thai patients with MODY and early-onset type 2 diabetes. Fifty-one unrelated probands with early-onset type 2 diabetes, 21 of them fitted into classic MODY criteria, were analysed for nucleotide variations in promoters, exons, and exon-intron boundaries of six known MODY genes, including HNF-4alpha, GCK, HNF-1alpha, IPF-1, HNF-1beta, and NeuroD1/beta2, by the polymerase chain reaction-single strand conformation polymorphism (PCR-SSCP) method followed by direct DNA sequencing. Missense mutations or mutations located in regulatory region, which were absent in 130 chromosomes of non-diabetic controls, were classified as potentially pathogenic mutations. We found that mutations of the six known MODY genes account for a small proportion of classic MODY (19%) and early-onset type 2 diabetes (10%) in Thais. Five of these mutations are novel including GCK R327H, HNF-1alpha P475L, HNF-1alphaG554fsX556, NeuroD1-1972 G > A and NeuroD1 A322N. Mutations of IPF-1 and HNF-1beta were not identified in the studied probands. Mutations of the six known MODY genes may not be a major cause of MODY and early-onset type 2 diabetes in Thais. Therefore, unidentified genes await discovery in a majority of Thai patients with MODY and early-onset type 2 diabetes.

Simulation of breaking waves using the high-order spectral method with laboratory experiments: Wave-breaking onset

Science.gov (United States)

Seiffert, Betsy R.; Ducrozet, Guillaume; Bonnefoy, Félicien

2017-11-01

This study investigates a wave-breaking onset criteria to be implemented in the non-linear potential flow solver HOS-NWT. The model is a computationally efficient, open source code, which solves for the free surface in a numerical wave tank using the High-Order Spectral (HOS) method. The goal of this study is to determine the best method to identify the onset of random single and multiple breaking waves over a large domain at the exact time they occur. To identify breaking waves, a breaking onset criteria based on the ratio of local energy flux velocity to the local crest velocity, introduced by Barthelemy et al. (2017) is selected. The breaking parameter is uniquely applied in the numerical model in that calculations of the breaking onset criteria ratio are not made only at the location of the wave crest, but at every point in the domain and at every time step. This allows the model to calculate the onset of a breaking wave the moment it happens, and without knowing anything about the wave a priori. The application of the breaking criteria at every point in the domain and at every time step requires the phase velocity to be calculated instantaneously everywhere in the domain and at every time step. This is achieved by calculating the instantaneous phase velocity using the Hilbert transform and dispersion relation. A comparison between more traditional crest-tracking techniques shows the calculation of phase velocity using Hilbert transform at the location of the breaking wave crest provides a good approximation of crest velocity. The ability of the selected wave breaking criteria to predict single and multiple breaking events in two dimensions is validated by a series of large-scale experiments. Breaking waves are generated by energy focusing and modulational instability methods, with a wide range of primary frequencies. Steep irregular waves which lead to breaking waves, and irregular waves with an energy focusing wave superimposed are also generated. This set of

Late-onset CMV disease following CMV prophylaxis.

LENUS (Irish Health Repository)

Donnelly, C

2012-02-01

BACKGROUND: Cytomegalovirus (CMV) is the most common opportunistic infection after solid-organ transplantation, increasing morbidity and mortality. Three months of oral valganciclovir have been shown to provide effective prophylaxis. Late-onset CMV disease, occurring after the discontinuation of prophylaxis, is now increasingly recognised. AIMS: To investigate the incidence and the time of detection of CMV infections in liver transplant recipients who received CMV prophylaxis. METHODS: Retrospective review of 64 high- and moderate-risk patients with 1 year of follow-up. RESULTS: The incidence of CMV infection was 12.5%, with 4.7% disease. All cases of symptomatic CMV disease were of late-onset. CONCLUSIONS: The incidence of CMV infections in this study was low compared with literature reports; however, the late-onset disease is an emerging problem. Detection of late-onset disease may be delayed because of less frequent clinic follow-up visits. Increased regular laboratory monitoring may allow earlier detection at the asymptomatic infection stage.

A New Approach for Determining Onset of Transition

Science.gov (United States)

Hassan, H. A.; Warren, E. S.

1997-01-01

The final report consists of three papers which outline and demonstrate the new method for determining transition onset. The procedure developed under this grant requires specification of the instability mechanism, i.e., Tollmien-Schlichting or crossflow, that leads to transition. The attached papers are entitled: 'An Alternative to the e(sup n) Method for Determining Onset of Transition', 'Transition Model for Swept Wing Flows', and 'A Transition Closure Model for Predicting Transition Onset'.

Progression of Late-Onset Stargardt Disease

OpenAIRE

Lambertus, Stanley; Lindner, Moritz; Bax, Nathalie M.; Mauschitz, Matthias M.; Nadal, Jennifer; Schmid, Matthias; Schmitz-Valckenberg, Steffen; den Hollander, Anneke I.; Weber, Bernhard H. F.; Holz, Frank G.; van der Wilt, Gert Jan; Fleckenstein, Monika; Hoyng, Carel B.

2016-01-01

Purpose: Identification of sensitive biomarkers is essential to determine potential effects of emerging therapeutic trials for Stargardt disease. This study aimed to describe the natural history of late-onset Stargardt, and demonstrates the accuracy of retinal pigment epithelium (RPE) atrophy progression as an outcome measure. Methods: We performed a retrospective cohort study collecting multicenter data from 47 patients (91 eyes) with late-onset Stargardt, defined by clinical phenotype...

Adult onset glycogen storage disease type II (adult onset Pompe disease): report and magnetic resonance images of two cases

International Nuclear Information System (INIS)

Del Gaizo, Andrew; Banerjee, Sima; Terk, Michael

2009-01-01

Glycogen storage disease type II (GSDII), also referred to as Pompe disease or acid maltase deficiency, is a rare inherited condition caused by a deficiency in acid alpha-glucosidase (GAA) enzyme activity. The condition is often classified by age of presentation, with infantile and late onset variants (Laforet et al. J Neurology 55:1122-8, 2000). Late onset tends to present with progressive proximal muscle weakness and respiratory insufficiency (Winkel et al. J Neurology 252:875-84, 2005). We report two cases of biopsy confirmed adult onset GSDII, along with key Magnetic Resonance (MR) images. (orig.)

Spontaneous onset of Complex Regional Pain Syndrome

NARCIS (Netherlands)

de Rooij, A.M.; Perez, R.S.G.M.; Huygen, F.J.; van Eijs, F.; van Kleef, M.; Bauer, M.C.R.; van Hilten, J.J.; Marinus, J.

2010-01-01

Complex Regional Pain Syndrome (CRPS) usually develops after a noxious event, but spontaneous onsets have been described in 3-11% of the cases. The existence of spontaneous-onset CRPS is highly debated and the aim of the present study was therefore to compare the phenotypic characteristics of CRPS

Generalized Statistical Mechanics at the Onset of Chaos

Directory of Open Access Journals (Sweden)

Alberto Robledo

2013-11-01

Full Text Available Transitions to chaos in archetypal low-dimensional nonlinear maps offer real and precise model systems in which to assess proposed generalizations of statistical mechanics. The known association of chaotic dynamics with the structure of Boltzmann–Gibbs (BG statistical mechanics has suggested the potential verification of these generalizations at the onset of chaos, when the only Lyapunov exponent vanishes and ergodic and mixing properties cease to hold. There are three well-known routes to chaos in these deterministic dissipative systems, period-doubling, quasi-periodicity and intermittency, which provide the setting in which to explore the limit of validity of the standard BG structure. It has been shown that there is a rich and intricate behavior for both the dynamics within and towards the attractors at the onset of chaos and that these two kinds of properties are linked via generalized statistical-mechanical expressions. Amongst the topics presented are: (i permanently growing sensitivity fluctuations and their infinite family of generalized Pesin identities; (ii the emergence of statistical-mechanical structures in the dynamics along the routes to chaos; (iii dynamical hierarchies with modular organization; and (iv limit distributions of sums of deterministic variables. The occurrence of generalized entropy properties in condensed-matter physical systems is illustrated by considering critical fluctuations, localization transition and glass formation. We complete our presentation with the description of the manifestations of the dynamics at the transitions to chaos in various kinds of complex systems, such as, frequency and size rank distributions and complex network images of time series. We discuss the results.

Endovascular treatment in proximal and intracranial carotid occlusion 9 hours after symptom onset

International Nuclear Information System (INIS)

Jakubowska, Malgorzata M.; Michels, Peter; Mueller-Jensen, Axel; Leppien, Andreas; Eckert, Bernd

2008-01-01

A debate is emerging over whether the treatment time window in acute stroke can be extended beyond 6 h if penumbral tissue can be identified. Treatment decisions are very difficult in cases of tandem proximal carotid occlusion with arterioarterial intracranial embolism. We enter this debate with the present report on a case of atherosclerotic proximal carotid occlusion and resulting periocclusional carotid T embolism that was successfully treated 9 h after symptom onset. The case of a 68-year-old man with fluctuating symptoms of right-hemispheric stroke is presented (NIHSS score 12-20 on admission). CT angiography demonstrated proximal carotid occlusion and periocclusional embolism of the entire internal carotid artery (ICA) including the carotid T segment. Penumbral tissue was diagnosed by nonenhanced and perfusion CT imaging 7.5 h after symptom onset. Treatment was initiated 9 h after symptom onset by passing the proximal occlusion with a microcatheter and local administration of recombinant tissue plasminogen activator (rt-PA) into the carotid T segment at the level of posterior communicating artery (PCoA) origin. Recanalization of the ICA and middle cerebral artery was accomplished within 1 h by flow establishment via the PCoA. The atherosclerotic proximal ICA occlusion was not stented due to the risk of embolism from remnant thrombi in the petrous and cavernous ICA segments. Follow-up MRI showed only mild haemorrhagic infarct transformation of the initial infarct core. The patient was discharged from hospital 18 days after treatment with NIHSS score 5. If penumbral tissue can be conclusively identified, endovascular treatment in proximal and intracranial tandem occlusion can be successful, even in treatments initiated 6-9 h after stroke onset. If the intracranial flow after recanalization can be established via the circle of Willis, the underlying proximal ICA occlusion may not require treatment. (orig.)

Endovascular treatment in proximal and intracranial carotid occlusion 9 hours after symptom onset

Energy Technology Data Exchange (ETDEWEB)

Jakubowska, Malgorzata M.; Michels, Peter; Mueller-Jensen, Axel [Asklepios Clinic Altona, Department of Neurology, Hamburg (Germany); Leppien, Andreas; Eckert, Bernd [Asklepios Clinic Altona, Department of Neuroradiology, Hamburg (Germany)

2008-07-15

A debate is emerging over whether the treatment time window in acute stroke can be extended beyond 6 h if penumbral tissue can be identified. Treatment decisions are very difficult in cases of tandem proximal carotid occlusion with arterioarterial intracranial embolism. We enter this debate with the present report on a case of atherosclerotic proximal carotid occlusion and resulting periocclusional carotid T embolism that was successfully treated 9 h after symptom onset. The case of a 68-year-old man with fluctuating symptoms of right-hemispheric stroke is presented (NIHSS score 12-20 on admission). CT angiography demonstrated proximal carotid occlusion and periocclusional embolism of the entire internal carotid artery (ICA) including the carotid T segment. Penumbral tissue was diagnosed by nonenhanced and perfusion CT imaging 7.5 h after symptom onset. Treatment was initiated 9 h after symptom onset by passing the proximal occlusion with a microcatheter and local administration of recombinant tissue plasminogen activator (rt-PA) into the carotid T segment at the level of posterior communicating artery (PCoA) origin. Recanalization of the ICA and middle cerebral artery was accomplished within 1 h by flow establishment via the PCoA. The atherosclerotic proximal ICA occlusion was not stented due to the risk of embolism from remnant thrombi in the petrous and cavernous ICA segments. Follow-up MRI showed only mild haemorrhagic infarct transformation of the initial infarct core. The patient was discharged from hospital 18 days after treatment with NIHSS score 5. If penumbral tissue can be conclusively identified, endovascular treatment in proximal and intracranial tandem occlusion can be successful, even in treatments initiated 6-9 h after stroke onset. If the intracranial flow after recanalization can be established via the circle of Willis, the underlying proximal ICA occlusion may not require treatment. (orig.)

Differences between early and late onset adult depression

DEFF Research Database (Denmark)

Drachmann Bukh, Jens; Bock, Camilla; Vinberg, Maj

2011-01-01

episode depression were systematically recruited. Characteristics including psychiatric co-morbidity, personality disorders and traits, stressful life events prior to onset, family history, and treatment outcome were assessed by structured interviews and compared by chi-square tests for categorical data...... prevalence of co-morbid personality disorders, higher levels of neuroticism, and a lower prevalence of stressful life events preceding onset compared to patients with later age-of-onset. There were no differences in severity of the depressive episode, treatment outcome or family loading of psychiatric......, t-tests for continuous parametric data and Mann-Whitney U-test for continuous nonparametric data. Logistic and multiple regression analyses were used to adjust the analyses for potentially confounding variables. Results: Patients with early onset of depression were characterised by a higher...

Onset and effectiveness of rocuronium for rapid onset of paralysis in patients with major burns: priming or large bolus

Science.gov (United States)

Han, T.-H.; Martyn, J. A. J.

2009-01-01

Background Burn injury leads to resistance to the effects of non-depolarizing muscle relaxants. We tested the hypothesis that a larger bolus dose is as effective as priming for rapid onset of paralysis after burns. Methods Ninety adults, aged 18–59 yr with 40 (2)% [mean (se)] burn and 30 (2) days after injury, received rocuronium as a priming dose followed by bolus (0.06+0.94 mg kg−1), or single bolus of either 1.0 or 1.5 mg kg−1. Sixty-one non-burned, receiving 1.0 mg kg−1 as a primed (0.06+0.94 mg kg−1) or full bolus dose, served as controls. Acceleromyography measured the onset times. Results Priming when compared with 1.0 mg kg−1 bolus in burned patients shortened the time to first appearance of twitch depression (30 vs 45 s, P<0.05) and time to maximum twitch inhibition (135 vs 210 s, P<0.05). The onset times between priming and higher bolus dose (1.5 mg kg−1) were not different (30 vs 30 s for first twitch depression and 135 vs 135 s for maximal depression, respectively). The onset times in controls, however, were significantly (P<0.05) faster than burns both for priming and for full bolus (15 and 15 s, respectively, for first twitch depression and 75 and 75 s for maximal depression). Priming caused respiratory distress in 10% of patients in both groups. Intubating conditions in burns were significantly better with 1.5 mg kg−1 than with priming or full 1.0 mg kg−1 bolus. Conclusions A dose of 1.5 mg kg−1 not only produces an initial onset of paralysis as early as 30 s, which we speculate could be a reasonable onset time for relief of laryngospasm, but also has an onset as fast as priming with superior intubating conditions and no respiratory side-effects. PMID:19029093

Enhanced Contribution of HLA in Pediatric Onset Ulcerative Colitis.

Science.gov (United States)

Venkateswaran, Suresh; Prince, Jarod; Cutler, David J; Marigorta, Urko M; Okou, David T; Prahalad, Sampath; Mack, David; Boyle, Brendan; Walters, Thomas; Griffiths, Anne; Sauer, Cary G; LeLeiko, Neal; Keljo, David; Markowitz, James; Baker, Susan S; Rosh, Joel; Pfefferkorn, Marian; Heyman, Melvin B; Patel, Ashish; Otley, Anthony; Baldassano, Robert; Noe, Joshua; Rufo, Paul; Oliva-Hemker, Maria; Davis, Sonia; Zwick, Michael E; Gibson, Greg; Denson, Lee A; Hyams, Jeffrey; Kugathasan, Subra

2018-03-19

The genetic contributions to pediatric onset ulcerative colitis (UC), characterized by severe disease and extensive colonic involvement, are largely unknown. In adult onset UC, Genome Wide Association Study (GWAS) has identified numerous loci, most of which have a modest susceptibility risk (OR 0.84-1.14), with the exception of the human leukocyte antigen (HLA) region on Chromosome 6 (OR 3.59). To study the genetic contribution to exclusive pediatric onset UC, a GWAS was performed on 466 cases with 2099 healthy controls using UK Biobank array. SNP2HLA was used to impute classical HLA alleles and their corresponding amino acids, and the results are compared with adult onset UC. HLA explained the almost entire association signal, dominated with 191 single nucleotide polymorphisms (SNPs) (p = 5 x 10-8 to 5 x 10-10). Although very small effects, established SNPs in adult onset UC loci had similar direction and magnitude in pediatric onset UC. SNP2HLA imputation identified HLA-DRB1*0103 (odds ratio [OR] = 6.941, p = 1.92*10-13) as the most significant association for pediatric UC compared with adult onset UC (OR = 3.59). Further conditioning showed independent effects for HLA-DRB1*1301 (OR = 2.25, p = 7.92*10-9) and another SNP rs17188113 (OR = 0.48, p = 7.56*10-9). Two HLA-DRB1 causal alleles are shared with adult onset UC, while at least 2 signals are unique to pediatric UC. Subsequent stratified analyses indicated that HLA-DRB1*0103 has stronger association for extensive disease (E4: OR = 8.28, p = 4.66x10-10) and female gender (OR = 8.85, p = 4.82x10-13). In pediatric onset UC, the HLA explains almost the entire genetic associations. In addition, the HLA association is approximately twice as strong in pediatric UC compared with adults, due to a combination of novel and shared effects. We speculate the paramount importance of antigenic stimulation either by infectious or noninfectious stimuli as a causal event in pediatric UC onset.

Experimental and Numerical Analysis of Damage in Woven GFRP Composites Under Large-deflection Bending

Science.gov (United States)

Ullah, Himayat; Harland, Andy R.; Silberschmidt, Vadim V.

2012-10-01

Textile-reinforced composites such as glass fibre-reinforced polymer (GFRP) used in sports products can be exposed to different in-service conditions such as large bending deformation and multiple impacts. Such loading conditions cause high local stresses and strains, which result in multiple modes of damage and fracture in composite laminates due to their inherent heterogeneity and non-trivial microstructure. In this paper, various damage modes in GFRP laminates are studied using experimental material characterisation, non-destructive micro-structural damage evaluation and numerical simulations. Experimental tests are carried out to characterise the behaviour of these materials under large-deflection bending. To obtain in-plane shear properties of laminates, tensile tests are performed using a full-field strain-measurement digital image correlation technique. X-ray micro computed tomography (Micro CT) is used to investigate internal material damage modes - delamination and cracking. Two-dimensional finite element (FE) models are implemented in the commercial code Abaqus to study the deformation behaviour and damage in GFRP. In these models, multiple layers of bilinear cohesive-zone elements are employed to study the onset and progression of inter-ply delamination and intra-ply fabric fracture of composite laminate, based on the X-ray Micro CT study. The developed numerical models are capable to simulate these features with their mechanisms as well as subsequent mode coupling observed in tests and Micro CT scanning. The obtained results of simulations are in agreement with experimental data.

Welding of 3D-printed carbon nanotube–polymer composites by locally induced microwave heating

Science.gov (United States)

Sweeney, Charles B.; Lackey, Blake A.; Pospisil, Martin J.; Achee, Thomas C.; Hicks, Victoria K.; Moran, Aaron G.; Teipel, Blake R.; Saed, Mohammad A.; Green, Micah J.

2017-01-01

Additive manufacturing through material extrusion, often termed three-dimensional (3D) printing, is a burgeoning method for manufacturing thermoplastic components. However, a key obstacle facing 3D-printed plastic parts in engineering applications is the weak weld between successive filament traces, which often leads to delamination and mechanical failure. This is the chief obstacle to the use of thermoplastic additive manufacturing. We report a novel concept for welding 3D-printed thermoplastic interfaces using intense localized heating of carbon nanotubes (CNTs) by microwave irradiation. The microwave heating of the CNT-polymer composites is a function of CNT percolation, as shown through in situ infrared imaging and simulation. We apply CNT-loaded coatings to a 3D printer filament; after printing, microwave irradiation is shown to improve the weld fracture strength by 275%. These remarkable results open up entirely new design spaces for additive manufacturing and also yield new insight into the coupling between dielectric properties and radio frequency field response for nanomaterial networks. PMID:28630927

Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating.

Science.gov (United States)

Sweeney, Charles B; Lackey, Blake A; Pospisil, Martin J; Achee, Thomas C; Hicks, Victoria K; Moran, Aaron G; Teipel, Blake R; Saed, Mohammad A; Green, Micah J

2017-06-01

Additive manufacturing through material extrusion, often termed three-dimensional (3D) printing, is a burgeoning method for manufacturing thermoplastic components. However, a key obstacle facing 3D-printed plastic parts in engineering applications is the weak weld between successive filament traces, which often leads to delamination and mechanical failure. This is the chief obstacle to the use of thermoplastic additive manufacturing. We report a novel concept for welding 3D-printed thermoplastic interfaces using intense localized heating of carbon nanotubes (CNTs) by microwave irradiation. The microwave heating of the CNT-polymer composites is a function of CNT percolation, as shown through in situ infrared imaging and simulation. We apply CNT-loaded coatings to a 3D printer filament; after printing, microwave irradiation is shown to improve the weld fracture strength by 275%. These remarkable results open up entirely new design spaces for additive manufacturing and also yield new insight into the coupling between dielectric properties and radio frequency field response for nanomaterial networks.

Marriage trends among Americans with childhood-onset disabilities, 1997-2013.

Science.gov (United States)

Tumin, Dmitry

2016-10-01

People with disabilities are less likely to marry than people without disabilities. Trends in marriage and assortative mating among people with disabilities have not been investigated. This study tested if marriage likelihood converged between adults with childhood-onset disabilities and their peers, and if married adults with childhood-onset disabilities became more likely to have a spouse without disabilities. U.S. data from annual National Health Interview Surveys were used to identify adults ages 18-44 surveyed between 1997 and 2013 (N = 562,229). Childhood-onset disability was defined by self-report of physical conditions limiting the respondent's activities since age marriage to a spouse without reported disabilities between adults with childhood-onset disabilities and adults without childhood-onset disabilities. Across survey years, the decline in odds of having ever married was stronger among adults with childhood-onset disabilities (OR = 0.94; 95% CI: 0.93, 0.95; p marriage among people with childhood-onset disabilities. Among adults married at the time of the survey, those with childhood-onset disabilities were less likely to have a spouse without reported disabilities. The American retreat from marriage has been accelerated among adults with childhood-onset disabilities, with high rates of in-marriage to other people with disabilities persisting in this group. Copyright © 2016 Elsevier Inc. All rights reserved.

The social competence and behavioral problem substrate of new- and recent-onset childhood epilepsy.

Science.gov (United States)

Almane, Dace; Jones, Jana E; Jackson, Daren C; Seidenberg, Michael; Hermann, Bruce P

2014-02-01

This study examined patterns of syndrome-specific problems in behavior and competence in children with new- or recent-onset epilepsy compared with healthy controls. Research participants consisted of 205 children aged 8-18, including youth with recent-onset epilepsy (n=125, 64 localization-related epilepsy [LRE] and 61 idiopathic generalized epilepsy [IGE]) and healthy first-degree cousin controls (n=80). Parents completed the Child Behavior Checklist for children aged 6-18 (CBCL/6-18) from the Achenbach System of Empirically Based Assessment (ASEBA). Dependent variables included Total Competence, Total Problems, Total Internalizing, Total Externalizing, and Other Problems scales. Comparisons of children with LRE and IGE with healthy controls were examined followed by comparisons of healthy controls with those having specific epilepsy syndromes of LRE (BECTS, Frontal/Temporal Lobe, and Focal NOS) and IGE (Absence, Juvenile Myoclonic, and IGE NOS). Children with LRE and/or IGE differed significantly (pcompetence (Total Competence including School and Social). Similarly, children with specific syndromes of LRE and IGE differed significantly (pcompetence (Total Competence including School). Only on the Thought Problems scale were there syndrome differences. In conclusion, children with recent-onset epilepsy present with significant behavioral problems and lower competence compared with controls, with little syndrome specificity whether defined broadly (LRE and IGE) or narrowly (specific syndromes of LRE and IGE). Copyright © 2013 Elsevier Inc. All rights reserved.

Fracture mechanisms and fracture control in composite structures

Science.gov (United States)

Kim, Wone-Chul

Four basic failure modes--delamination, delamination buckling of composite sandwich panels, first-ply failure in cross-ply laminates, and compression failure--are analyzed using linear elastic fracture mechanics (LEFM) and the J-integral method. Structural failures, including those at the micromechanical level, are investigated with the aid of the models developed, and the critical strains for crack propagation for each mode are obtained. In the structural fracture analyses area, the fracture control schemes for delamination in a composite rib stiffener and delamination buckling in composite sandwich panels subjected to in-plane compression are determined. The critical fracture strains were predicted with the aid of LEFM for delamination and the J-integral method for delamination buckling. The use of toughened matrix systems has been recommended for improved damage tolerant design for delamination crack propagation. An experimental study was conducted to determine the onset of delamination buckling in composite sandwich panel containing flaws. The critical fracture loads computed using the proposed theoretical model and a numerical computational scheme closely followed the experimental measurements made on sandwich panel specimens of graphite/epoxy faceskins and aluminum honeycomb core with varying faceskin thicknesses and core sizes. Micromechanical models of fracture in composites are explored to predict transverse cracking of cross-ply laminates and compression fracture of unidirectional composites. A modified shear lag model which takes into account the important role of interlaminar shear zones between the 0 degree and 90 degree piles in cross-ply laminate is proposed and criteria for transverse cracking have been developed. For compressive failure of unidirectional composites, pre-existing defects play an important role. Using anisotropic elasticity, the stress state around a defect under a remotely applied compressive load is obtained. The experimentally

Almost conserved operators in nearly many-body localized systems

Science.gov (United States)

Pancotti, Nicola; Knap, Michael; Huse, David A.; Cirac, J. Ignacio; Bañuls, Mari Carmen

2018-03-01

We construct almost conserved local operators, that possess a minimal commutator with the Hamiltonian of the system, near the many-body localization transition of a one-dimensional disordered spin chain. We collect statistics of these slow operators for different support sizes and disorder strengths, both using exact diagonalization and tensor networks. Our results show that the scaling of the average of the smallest commutators with the support size is sensitive to Griffiths effects in the thermal phase and the onset of many-body localization. Furthermore, we demonstrate that the probability distributions of the commutators can be analyzed using extreme value theory and that their tails reveal the difference between diffusive and subdiffusive dynamics in the thermal phase.

A Supervised Classification Algorithm for Note Onset Detection

Directory of Open Access Journals (Sweden)

Douglas Eck

2007-01-01

Full Text Available This paper presents a novel approach to detecting onsets in music audio files. We use a supervised learning algorithm to classify spectrogram frames extracted from digital audio as being onsets or nononsets. Frames classified as onsets are then treated with a simple peak-picking algorithm based on a moving average. We present two versions of this approach. The first version uses a single neural network classifier. The second version combines the predictions of several networks trained using different hyperparameters. We describe the details of the algorithm and summarize the performance of both variants on several datasets. We also examine our choice of hyperparameters by describing results of cross-validation experiments done on a custom dataset. We conclude that a supervised learning approach to note onset detection performs well and warrants further investigation.

Social phobia with sudden onset--post-panic social phobia?

DEFF Research Database (Denmark)

Kristensen, Ann Suhl; Mortensen, Erik Lykke; Mors, Ole

2008-01-01

Overlap between social phobia (SP) and panic disorder (PD) has been observed in epidemiological, family, and challenge studies. One possible explanation is that some cases of SP develop as a consequence of a panic attack in a social situation. By definition, these cases of SP have sudden onset...... recruited as part of an etiological study. Patients with SP with sudden onset did, as hypothesized, differ from patients with SP without sudden onset with regard to age of onset and extraversion, but not with regard to symptoms. They did not differ markedly from patients with comorbid SP and PD. The concept...

Mutation in LEMD3 (Man1 Associated with Osteopoikilosis and Late-Onset Generalized Morphea: A New Buschke-Ollendorf Syndrome Variant

Directory of Open Access Journals (Sweden)

Benjamin Korman

2016-01-01

Full Text Available Introduction. Buschke-Ollendorf syndrome (BOS is an uncommon syndrome characterized by osteopoikilosis and other bone abnormalities, accompanied by skin lesions, most frequently connective tissue nevi. BOS is caused by mutations in the LEMD3 gene, which encodes the inner nuclear membrane protein Man1. We describe a unique case of osteopoikilosis associated with late-onset localized scleroderma and familial LEMD3 mutations. Case Report. A 72-year-old woman presented with adult-onset diffuse morphea and bullous skin lesions. Evaluation revealed multiple hyperostotic lesions (osteopoikilosis suggestive of BOS. DNA sequencing identified a previously undescribed nonsense mutation (Trp621X in the LEMD3 gene encoding Man1. Two additional family members were found to have osteopoikilosis and carry the same LEMD3 mutation. Conclusions and Relevance. We report a unique familial LEMD3 mutation in an individual with osteopoikilosis and late-onset morphea. We propose that this constellation represents a novel syndromic variant of BOS.

Psychiatric morbidity develops after onset of pediatric multiple sclerosis

DEFF Research Database (Denmark)

Spangsberg Boesen, Magnus; Thygesen, Lau Caspar; Uldall, Peter Vilhelm

2018-01-01

BACKGROUND: Pediatric-onset multiple sclerosis (MS) affects life at a stage vital for social and educational achievements and psychiatric co-morbidity is common after MS onset. Few studies have examined psychiatric morbidity before MS onset. METHODS: In this nationwide study, detailed case...... with psychiatric morbidity as exposure and MS as outcome, and a matched cohort study with MS as exposure and psychiatric co-morbidity as outcome. Hazard ratios (HR) including 95% confidence intervals (CI) were estimated using Cox regression. RESULTS: We identified 212 children with MS and 1060 controls....... No association between psychiatric morbidity and the rate of MS was found before MS onset. After MS onset, children with MS had two times higher hazard for psychiatric co-morbidity compared with children without MS (HR=2.0; 95% CI=1.3-3.1; pPsychiatric morbidity seems to commence after MS...

Local Self-Government in Central and Eastern Europe: a Strong and Independent Local-Level Management Tool or Just a Paper Tiger?

Directory of Open Access Journals (Sweden)

Vjekoslav Bratić

2008-06-01

Full Text Available The onset of the independence process in Central and Eastern European (CEE countries during the 1990s was marked by tremendous optimism and a declared wish for stronger fiscal decentralisation and the transfer of powers, responsibilities and resources to the units of local and regional self-government that were supposed to be closest to citizens in resolving their daily problems. However, this has not happened in these countries, at least not according to the basic financial decentralisation indicators, and this is the main thesis of this work. Despite numerous adjustments made in the local self-government organisation in the observed countries, an optimum level of local and regional self-government organisation has still not been achieved. The units of local and regional self-government are still heavily dependent on, or rather restricted by, the strong central governments, which reduces their autonomy and their influence on the local social and economic development.

A Local Approach Methodology for the Analysis of Ultimate Strength ...

African Journals Online (AJOL)

The local approach methodology in contrast to classical fracture mechanics can be used to predict the onset of tearing fracture, and the effects of geometry in tubular joints. Finite element analysis of T-joints plate geometries, and tubular joints has been done. The parameters of constraint, equivalent stress, plastic strain and ...

Neuro-Music Therapy for Recent-Onset Tinnitus

Directory of Open Access Journals (Sweden)

Miriam Grapp

2013-05-01

Full Text Available The aim of this pilot study was the evaluation of the neuro-music therapy approach as a new treatment option for patients with recent-onset tinnitus whose tinnitus symptoms were enduring after initial pharmacological treatment. In all, 15 patients with recent-onset tinnitus took part in our manualized short-term music-therapeutic treatment. Tinnitus severity and individual tinnitus distress were assessed by the German version of the tinnitus questionnaire (TQ and the Attention and Performance Self-Assessment Scale (APSA at three different measurement times: baseline (T0, start of treatment (T1, and end of treatment (T2. Score changes in TQ and APSA from start to end of treatment indicated significant improvements in tinnitus-related distress. According to the Jacobson and Truax reliable change index (RC, 73.3% of the patients showed a reliable reduction in individual TQ-score. The neuro-music therapy for recent-onset tinnitus according to the “Heidelberg Model” introduced in this pilot study seems to provide an effective treatment option for patients with recent-onset tinnitus.

Temporal Discrimination: Mechanisms and Relevance to Adult-Onset Dystonia

Directory of Open Access Journals (Sweden)

Antonella Conte

2017-11-01

Full Text Available Temporal discrimination is the ability to determine that two sequential sensory stimuli are separated in time. For any individual, the temporal discrimination threshold (TDT is the minimum interval at which paired sequential stimuli are perceived as being asynchronous; this can be assessed, with high test–retest and inter-rater reliability, using a simple psychophysical test. Temporal discrimination is disordered in a number of basal ganglia diseases including adult-onset dystonia, of which the two most common phenotypes are cervical dystonia and blepharospasm. The causes of adult-onset focal dystonia are unknown; genetic, epigenetic, and environmental factors are relevant. Abnormal TDTs in adult-onset dystonia are associated with structural and neurophysiological changes considered to reflect defective inhibitory interneuronal processing within a network which includes the superior colliculus, basal ganglia, and primary somatosensory cortex. It is hypothesized that abnormal temporal discrimination is a mediational endophenotype and, when present in unaffected relatives of patients with adult-onset dystonia, indicates non-manifesting gene carriage. Using the mediational endophenotype concept, etiological factors in adult-onset dystonia may be examined including (i the role of environmental exposures in disease penetrance and expression; (ii sexual dimorphism in sex ratios at age of onset; (iii the pathogenesis of non-motor symptoms of adult-onset dystonia; and (iv subcortical mechanisms in disease pathogenesis.

Onset, active and break periods of the Australian monsoon

International Nuclear Information System (INIS)

Shaik, Hakeem A; Cleland, Samuel J

2010-01-01

Four operational techniques of monsoon monitoring the Australian monsoon at Darwin have been developed in the Darwin Regional Specialised Meteorological Centre. Two techniques used the rainfall only criteria and look into the onset of wet season rainfall/monsoon rainfall. The other two techniques are based purely on Darwin wind data. The data used for the study ranges from 14 to 21 years. The main purpose of the study is to develop near-real time monitoring tools for the Australian monsoon at Darwin. The average date of onset of the monsoon ranges from 19 December to 30 December. The average date of monsoon onset is 28 December. In eleven out of twenty-one years the onset date remained within three days range between the two rainfall techniques, whereas it is eleven out of fourteen years between the wind techniques. The median number of active monsoon spells in a wet season is 3 for the rainfall techniques and 6 for the wind techniques. The average length of each active monsoon spell is around 4 days for all of the techniques. The date of onset of the monsoon has shown negative correlation with the Southern Oscillation Index (SOI) that is late onset is found to occur in El Nino years while early onset is more likely in La Nina years.

The neuropsychology and neurobiology of late-onset schizophrenia and very-late-onset schizophrenia-like psychosis: A critical review.

Science.gov (United States)

Van Assche, Lies; Morrens, Manuel; Luyten, Patrick; Van de Ven, Luc; Vandenbulcke, Mathieu

2017-12-01

The current review discusses neuropsychological profiles and the longitudinal course of cognitive dysfunction in Late Onset Schizophrenia (LOS) and Very-late-onset schizophrenia-like psychosis (VLOSLP), and attempts to clarify its neurobiological underpinnings. A systematic literature search resulted in 29 publications describing original research on the neuropsychology of LOS/VLOSLP and 46 studies focussing on neurobiology. Although mildly progressive cognitive impairment is usually present, only a subgroup of LOS/VLOSLP develops dementia during a 10-year follow-up succeeding the onset of psychosis. This coincides with the absence of neuropathological evidence for neurodegeneration in many cases. Cognitive deterioration is characterized by deficits in (working) memory, language, psychomotor speed and executive functioning. Underlying neurobiological changes encompass white matter pathology, increased ventricle-to-brain ratio (VBR) with coinciding atrophy and hypo-metabolism of frontal, temporal and subcortical areas. Multiple changes in neurobiology and cognition contributing to LOS/VLOSLP may reflect stress-related accelerated brain aging rather than neurodegenerative pathology. Their involvement in the onset of illness, however, might be inversely proportional to pre-existing (psychosocial and/or genetic) vulnerability to psychosis. Copyright © 2017 Elsevier Ltd. All rights reserved.

Early development of zooxanthella-containing eggs of the corals Porites cylindrica and Montipora digitata: The endodermal localization of zooxanthellae.

Science.gov (United States)

Hirose, Mamiko; Hidaka, Michio

2006-10-01

We studied the early development of zooxanthellae-containing eggs of the scleractinian corals Porites cylindrica and Montipora digitata to elucidate how zooxanthellae become localized to the endoderm of planulae during the course of development. In both species, zooxanthellae were distributed evenly in the oocytes and delivered almost equally to the blastomeres during cleavage. In P. cylindrica, gastrulation occurred via delamination or ingression, and blastomeres containing zooxanthellae dropped into the blastocoel during gastrulation. Thus, zooxanthellae were restricted to the endodermal cells at the gastrula or early planula stage in P. cylindrica. In M. digitata, gastrulation occurred by a combination of invagination and epiboly to form a somewhat concave gastrula. Zooxanthellae were present in both endodermal and ectodermal cells of early planulae, but they disappeared from the ectoderm as the planulae matured. In our previous study on two species of Pocillopora, we found that zooxanthellae were localized in eggs as well as in embryos, and that blastomeres containing zooxanthellae later dropped into the blastocoel to become restricted to the endoderm (Hirose et al., 2000). The timing and mechanism of zooxanthella localization and types of gastrulation differed among species belonging to the three genera. These results suggest that zooxanthella localization in the embryos reflects the timing of the determination of presumptive endoderm cells and/or specificity of zooxanthellae toward presumptive endoderm cells.

Widespread disruption of functional brain organization in early-onset Alzheimer's disease.

Directory of Open Access Journals (Sweden)

Sofie M Adriaanse

Full Text Available Early-onset Alzheimer's disease (AD patients present a different clinical profile than late-onset AD patients. This can be partially explained by cortical atrophy, although brain organization might provide more insight. The aim of this study was to examine functional connectivity in early-onset and late-onset AD patients. Resting-state fMRI scans of 20 early-onset (<65 years old, 28 late-onset (≥65 years old AD patients and 15 "young" (<65 years old and 31 "old" (≥65 years old age-matched controls were available. Resting-state network-masks were used to create subject-specific maps. Group differences were examined using a non-parametric permutation test, accounting for gray-matter. Performance on five cognitive domains were used in a correlation analysis with functional connectivity in AD patients. Functional connectivity was not different in any of the RSNs when comparing the two control groups (young vs. old controls, which implies that there is no general effect of aging on functional connectivity. Functional connectivity in early-onset AD was lower in all networks compared to age-matched controls, where late-onset AD showed lower functional connectivity in the default-mode network. Functional connectivity was lower in early-onset compared to late-onset AD in auditory-, sensory-motor, dorsal-visual systems and the default mode network. Across patients, an association of functional connectivity of the default mode network was found with visuoconstruction. Functional connectivity of the right dorsal visual system was associated with attention across patients. In late-onset AD patients alone, higher functional connectivity of the sensory-motor system was associated with poorer memory performance. Functional brain organization was more widely disrupted in early-onset AD when compared to late-onset AD. This could possibly explain different clinical profiles, although more research into the relationship of functional connectivity and cognitive

The neuropsychology and neurobiology of late-onset schizophrenia and very-late-onset schizophrenia-like psychosis : a critical review

OpenAIRE

Assche, Van, Lies; Morrens, Manuel; Luyten, Patrick; Ven, Van de, Luc; Vandenbulcke, Mathieu

2017-01-01

Abstract: OBJECTIVE: The current review discusses neuropsychological profiles and the longitudinal course of cognitive dysfunction in Late Onset Schizophrenia (LOS) and Very-late-onset schizophrenia-like psychosis (VLOSLP), and attempts to clarify its neurobiological underpinnings. METHOD: A systematic literature search resulted in 29 publications describing original research on the neuropsychology of LOS/VLOSLP and 46 studies focussing on neurobiology. RESULTS: Although mildly progressive co...

Humans Optimize Decision-Making by Delaying Decision Onset

Science.gov (United States)

Teichert, Tobias; Ferrera, Vincent P.; Grinband, Jack

2014-01-01

Why do humans make errors on seemingly trivial perceptual decisions? It has been shown that such errors occur in part because the decision process (evidence accumulation) is initiated before selective attention has isolated the relevant sensory information from salient distractors. Nevertheless, it is typically assumed that subjects increase accuracy by prolonging the decision process rather than delaying decision onset. To date it has not been tested whether humans can strategically delay decision onset to increase response accuracy. To address this question we measured the time course of selective attention in a motion interference task using a novel variant of the response signal paradigm. Based on these measurements we estimated time-dependent drift rate and showed that subjects should in principle be able trade speed for accuracy very effectively by delaying decision onset. Using the time-dependent estimate of drift rate we show that subjects indeed delay decision onset in addition to raising response threshold when asked to stress accuracy over speed in a free reaction version of the same motion-interference task. These findings show that decision onset is a critical aspect of the decision process that can be adjusted to effectively improve decision accuracy. PMID:24599295

Rest tremor in idiopathic adult-onset dystonia.

Science.gov (United States)

Gigante, A F; Berardelli, A; Defazio, G

2016-05-01

Tremor in dystonia has been described as a postural or kinetic abnormality. In recent series, however, patients with idiopathic adult-onset dystonia also displayed rest tremor. The frequency and distribution of rest tremor were studied in a cohort of 173 consecutive Italian patients affected by various forms of idiopathic adult-onset dystonia attending our movement disorder clinic over 8 months. Examination revealed tremor in 59/173 patients (34%): 12 patients had head tremor, 34 patients had arm tremor, whilst 13 patients presented tremor in both sites. Head tremor was postural in all patients, whereas arm tremor was postural/kinetic in 28 patients, only at rest in one and both postural/kinetic and at rest in 18 patients. Patients with tremor were more likely to have segmental/multifocal dystonia. Patients who had rest tremor (either alone or associated with action tremor) had a higher age at dystonia onset and a greater frequency of dystonic arm involvement than patients with action tremor alone or without tremor. Both action and rest tremor are part of the tremor spectrum of adult-onset dystonia and are more frequently encountered in segmental/multifocal dystonia. The higher age at dystonia onset and the greater frequency of arm dystonia in patients with rest tremor may have pathophysiological implications and may account, at least in part, for the previous lack of identification of rest tremor as one possible type of tremor present in dystonia. © 2016 EAN.

Prediction of Indian Summer-Monsoon Onset Variability: A Season in Advance.

Science.gov (United States)

Pradhan, Maheswar; Rao, A Suryachandra; Srivastava, Ankur; Dakate, Ashish; Salunke, Kiran; Shameera, K S

2017-10-27

Monsoon onset is an inherent transient phenomenon of Indian Summer Monsoon and it was never envisaged that this transience can be predicted at long lead times. Though onset is precipitous, its variability exhibits strong teleconnections with large scale forcing such as ENSO and IOD and hence may be predictable. Despite of the tremendous skill achieved by the state-of-the-art models in predicting such large scale processes, the prediction of monsoon onset variability by the models is still limited to just 2-3 weeks in advance. Using an objective definition of onset in a global coupled ocean-atmosphere model, it is shown that the skillful prediction of onset variability is feasible under seasonal prediction framework. The better representations/simulations of not only the large scale processes but also the synoptic and intraseasonal features during the evolution of monsoon onset are the comprehensions behind skillful simulation of monsoon onset variability. The changes observed in convection, tropospheric circulation and moisture availability prior to and after the onset are evidenced in model simulations, which resulted in high hit rate of early/delay in monsoon onset in the high resolution model.

Dysthymic disorder: clinical characteristics in relation to age at onset.

Science.gov (United States)

Barzega, G; Maina, G; Venturello, S; Bogetto, F

2001-09-01

The variability in the clinical presentation of dysthymia has given rise to a rich debate in literature, and various hypotheses have been proposed. One is that the clinical presentation differs in relation to age at onset. The aim of the study was to evaluate differences in socio-demographic and clinical characteristics in a sample of patients with dysthymia (DSM-IV), in relation to age at onset. 84 consecutive outpatients with a diagnosis of dysthymia (DSM-IV) were studied. All subjects were evaluated by a semistructured clinical interview and the following rating scales: HAM-A, HAM-D, MADRS, Paykel's Interview for Recent Life Events. 23.8% of the sample had early-onset (dysthymia. Patients with early-onset disorder were significantly younger at the observation, more frequently female and single. They had a significantly longer duration of illness and in a significantly higher percentage had already received a specialist treatment before admission in the present trial. No differences in the frequency of symptoms were observed. A significantly higher percentage of patients with late-onset disease reported at least one stressful event in the year preceding the onset of dysthymia. A positive history of major depression was significantly more common among the early-onset group; social phobia, panic disorder and conversive disorder were also more frequent in this group. The late-onset patients frequently presented generalized anxiety disorder, substance abuse and somatization disorder. The study is retrospective and enrolls a limited number of cases. The present study agrees with other reports on the differences in clinical presentation of dysthymia according to age at onset. Although they are not actually related to age at onset, some interesting findings emerged in the symptomatological characterization of the disorder, referring to the diagnostic criteria proposed in DSM-IV.

Preimplantation genetic diagnosis: does age of onset matter (anymore)?

Science.gov (United States)

Krahn, Timothy

2009-06-01

The identification and avoidance of disease susceptibility in embryos is the most common goal of preimplantation genetic diagnosis (PGD). Most jurisdictions that accept but regulate the availability of PGD restrict it to what are characterized as 'serious' conditions. Line-drawing around seriousness is not determined solely by the identification of a genetic mutation. Other factors seen to be relevant include: impact on health or severity of symptoms; degree of penetrance (probability of genotype being expressed as a genetic disorder); potential for therapy; rate of progression; heritability; and age of onset. In the original applications of PGD, most, if not all of these factors were seen as necessary but none was seen as sufficient for determining whether a genetic condition was labelled 'serious'. This, however, is changing as impact on health or severity of symptoms is coming to eclipse the other considerations. This paper investigates how age of onset (primarily in the context of the United Kingdom (UK)) has become considerably less significant as a criterion for determining ethically acceptable applications of PGD. Having moved off the threshold of permitting PGD testing for only fatal (or seriously debilitating), early-onset diseases, I will investigate reasons for why age of onset will not do any work to discriminate between which adult-onset diseases should be considered serious or not. First I will explain the rationale underpinning age of onset as a factor to be weighed in making determinations of seriousness. Next I will challenge the view that later-onset conditions are less serious for being later than earlier-onset conditions. The final section of the paper will discuss some of the broader disability concerns at stake in limiting access to PGD based upon determinations of the 'seriousness' of genetic conditions. Instead of advocating a return to limiting PGD to only early-onset conditions, I conclude that the whole enterprise of trying to draw lines

[Age at Onset as a Marker of Subtypes of Manic-Depressive Illness].

Science.gov (United States)

Pedraza, Ricardo Sánchez; Losada, Jorge Rodríguez; Jaramillo, Luis Eduardo

2012-09-01

Age at onset of bipolar disorder has been reported as a variable that may be associated with different clinical subtypes. To identify patterns in the distributions of age at onset of bipolar disease and to determine whether age at onset is associated with specific clinical characteristics. Admixture analysis was applied to identify bipolar disorder subtypes according to age at onset. The EMUN scale was used to evaluate clinical characteristics and principal components were estimated to evaluate the relationship between subtypes according to age at onset and symptoms in the acute in the acute phase, using multivariable analyses. According to age at onset, three distributions have been found: early onset: 17.7 years (S.D. 2.4); intermediate-onset: 23.9 years (S.D. 5.6); late onset: 42.8 years (S.D. 12.1). The late-onset group is antisocial, with depressive symptoms, thinking and language disorders, and socially disruptive behaviors. In patients having bipolar disorder, age at onset is antisocial with three groups having specific clinical characteristics. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

Attention capture by abrupt onsets: re-visiting the priority tag model

OpenAIRE

Meera Mary Sunny; Adrian evon Muhlenen

2013-01-01

Abrupt onsets have been shown to strongly attract attention in a stimulus-driven, bottom-up manner. However, the precise mechanism that drives capture by onsets is still debated. According to the new object account, abrupt onsets capture attention because they signal the appearance of a new object. Yantis and Johnson (1990) used a visual search task and showed that up to four onsets can be automatically prioritized. However, in their study the number of onsets co-varied with the total number ...

A modifier of Huntington's disease onset at the MLH1 locus.

Science.gov (United States)

Lee, Jong-Min; Chao, Michael J; Harold, Denise; Abu Elneel, Kawther; Gillis, Tammy; Holmans, Peter; Jones, Lesley; Orth, Michael; Myers, Richard H; Kwak, Seung; Wheeler, Vanessa C; MacDonald, Marcy E; Gusella, James F

2017-10-01

Huntington's disease (HD) is a dominantly inherited neurodegenerative disease caused by an expanded CAG repeat in HTT. Many clinical characteristics of HD such as age at motor onset are determined largely by the size of HTT CAG repeat. However, emerging evidence strongly supports a role for other genetic factors in modifying the disease pathogenesis driven by mutant huntingtin. A recent genome-wide association analysis to discover genetic modifiers of HD onset age provided initial evidence for modifier loci on chromosomes 8 and 15 and suggestive evidence for a locus on chromosome 3. Here, genotyping of candidate single nucleotide polymorphisms in a cohort of 3,314 additional HD subjects yields independent confirmation of the former two loci and moves the third to genome-wide significance at MLH1, a locus whose mouse orthologue modifies CAG length-dependent phenotypes in a Htt-knock-in mouse model of HD. Both quantitative and dichotomous association analyses implicate a functional variant on ∼32% of chromosomes with the beneficial modifier effect that delays HD motor onset by 0.7 years/allele. Genomic DNA capture and sequencing of a modifier haplotype localize the functional variation to a 78 kb region spanning the 3'end of MLH1 and the 5'end of the neighboring LRRFIP2, and marked by an isoleucine-valine missense variant in MLH1. Analysis of expression Quantitative Trait Loci (eQTLs) provides modest support for altered regulation of MLH1 and LRRFIP2, raising the possibility that the modifier affects regulation of both genes. Finally, polygenic modification score and heritability analyses suggest the existence of additional genetic modifiers, supporting expanded, comprehensive genetic analysis of larger HD datasets. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Atypical antipsychotics in the treatment of early-onset schizophrenia

Directory of Open Access Journals (Sweden)

Hrdlicka M

2015-04-01

Full Text Available Michal Hrdlicka, Iva Dudova Department of Child Psychiatry, Charles University Second Faculty of Medicine and University Hospital Motol, Prague, Czech Republic Abstract: Atypical antipsychotics (AAPs have been successfully used in early-onset schizophrenia (EOS. This review summarizes the randomized, double-blind, controlled studies of AAPs in EOS, including clozapine, risperidone, olanzapine, aripiprazole, paliperidone, quetiapine, and ziprasidone. No significant differences in efficacy between AAPs were found, with the exception of clozapine and ziprasidone. Clozapine demonstrated superior efficacy in treatment-resistant patients with EOS, whereas ziprasidone failed to demonstrate efficacy in the treatment of EOS. Our review also focuses on the onset of action and weight gain associated with AAPs. The data on onset of action of AAPs in pediatric psychiatry are scanty and inconsistent. Olanzapine appears to cause the most significant weight gain in patients with EOS, while ziprasidone and aripiprazole seem to cause the least. Keywords: early-onset schizophrenia, atypical antipsychotics, efficacy, onset of action, weight gain

Onset of Spin Polarization in Four-Gate Quantum Point Contacts

Science.gov (United States)

Jones, Alex

A series of simulations which utilize a Non-equilibrium Green's function (NEGF) formalism is suggested which can provide indirect evidence of the fine and non-local electrostatic tuning of the onset of spin polarization in two closely spaced quantum point contacts (QPCs) that experience a phenomenon known as lateral spin-orbit coupling (LSOC). Each of the QPCs that create the device also has its own pair of side gates (SGs) which are in-plane with the device channel. Numerical simulations of the conductance of the two closely spaced QPCs or four-gate QPC are carried out for different biasing conditions applied to two leftmost and rightmost SGs. Conductance plots are then calculated as a function of the variable, Vsweep, which is the common sweep voltage applied to the QPC. When Vsweep is only applied to two of the four side gates, the plots show several conductance anomalies, i.e., below G0 = 2e2/h, characterized by intrinsic bistability, i.e., hysteresis loops due to a difference in the conductance curves for forward and reverse common voltage sweep simulations. The appearance of hysteresis loops is attributed to the co-existence of multistable spin textures in the narrow channel of the four-gate QPC. The shape, location, and number of hysteresis loops are very sensitive to the biasing conditions on the four SGs. The shape and size of the conductance anomalies and hysteresis loops are shown to change when the biasing conditions on the leftmost and rightmost SGs are swapped, a rectifying behavior providing an additional indirect evidence for the onset of spontaneous spin polarization in nanoscale devices made of QPCs. The results of the simulations reveal that the occurrence and fine tuning of conductance anomalies in QPC structures are highly sensitive to the non-local action of closely spaced SGs. It is therefore imperative to take into account this proximity effect in the design of all electrical spin valves making use of middle gates to fine tune the spin

Does Late-onset Anorexia Nervosa Exist? Findings From a Comparative Study in Singapore.

Science.gov (United States)

Tan, Shian Ming; Kwok, Kah Foo Victor; Zainal, Kelly A; Lee, Huei Yen

2018-03-01

The incidence of cases of older onset anorexia nervosa (AN) has increased in recent years. However, the literature on late-onset AN has been inconclusive. The goal of this study was to compare late-onset with early-onset cases of AN. Cases of AN presenting to an eating disorders treatment service were identified and the associated medical records were studied retrospectively. Of the 577 cases of AN that were studied, 7.1% were late-onset. Unlike the early-onset cases of AN, the late-onset cases reported less teasing and more relationship problems as a trigger for the illness. They were also less likely to join the eating disorders treatment program. Otherwise, the late-onset AN cases were largely similar to the early-onset cases. Although differences exist between early-onset and late-onset cases of AN, these are few. Until stronger evidence emerges over time, there currently seems to be minimal justification to accord late-onset AN a unique position in psychiatric nosology.

Relationship between onset of spontaneous pneumothorax and weather conditions.

Science.gov (United States)

Mishina, Taijiro; Watanabe, Atsushi; Miyajima, Masahiro; Nakazawa, Junji

2017-09-01

Spontaneous pneumothorax (SP) results from the rupture of blebs or bullae. It has been suggested that changes in weather conditions may trigger the onset of SP. Our aim was to examine the association between the onset of primary SP with weather changes in the general population in Sapporo, Japan. From January 2008 through September 2013, 345 consecutive cases with a diagnosis of primary SP were reviewed. All cases of primary SP developed in the area within 40 km from the Sapporo District Meteorological Observatory. Climatic measurements were obtained from the Observatory, which included 1-h readings of weather conditions. Logistic regression model was used to obtain predicted risks for the onset of SP with respect to weather conditions. SP occurred significantly when the atmospheric pressure decreased by - 18 hPa or less during 96 h before the survey date (odds ratio = 1.379, P = 0.026), when the pressure increased by 15 hPa or more during 72 h before the survey date (odds ratio = 1.095, P = 0.007) and when maximum fluctuation in atmospheric pressure over 22 hPa was observed during 96 h before the survey date (odds ratio = 1.519, P = 0.001). Other weather conditions, including the presence of thunderstorms, were not significantly correlated with the onset of pneumothorax. Changes in atmospheric pressure influence the onset of SP. Future studies on the relationship between the onset of SP and weather conditions on days other than before the onset and with large number of patients may enable us to predict the onset of SP in various regions and weather conditions. © The Author 2017. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

Age at onset typology in opioid dependent men: an exploratory study.

Science.gov (United States)

De, Biswajit; Mattoo, Surendra K; Basu, Debasish

2002-04-01

This study attempted to apply age at onset typology in ICD-10 diagnosed opioid dependence. The sample comprised 80 men seeking treatment at an addiction clinic. The measures included socio-demographic and clinical profile, Severity of Opioid Dependence Questionnaire, Modified Sensation Seeking Scale, Multiphasic Personality Questionnaire (MPQ) and Family History Assessment Module. A cut-off age of 20/21 years for an early-onset late-onset typology of opioid dependence was obtained using two methods - the modal age at onset method and one-third sample by age at onset method. The early onset group showed significant differences in terms of it being more often younger, urban, unmarried, wage earning or students, using oral opioids (not heroin or injectables), showing higher lifetime use and dependence of sedatives, earlier onset of use and dependence of sedatives and tobacco, and higher global psychopathology in terms of MPQ. The early onset group also showed statistically insignificant trends for lesser use and dependence of alcohol, higher severity of opioid dependence, more legal and less social complications, higher sensation seeking (except boredom susceptibility), and more frequent substance dependence in first degree relatives. The age at onset typology in opioid dependence appears to be feasible and having some similarities to similar typology in alcoholism.

Adult-onset intradural spinal teratoma: report of 18 consecutive cases and outcomes in a single center.

Science.gov (United States)

Wan, Wei; Yang, Cheng; Yan, Wangjun; Liu, Tielong; Yang, Xinghai; Song, Dianwen; Xiao, Jianru

2017-07-01

Eighteen consecutive patients with adult-onset intradural spinal teratoma underwent surgical treatment in our center from 1998 to 2013. Teratoma is defined as a neoplasm composed of elements derived from three germ cell layers (ectoderm, endoderm and mesoderm). Intraspinal teratoma is extremely rare and accounts for 0.2-0.5% of all spinal cord tumors. Moreover, teratoma occurs primarily in neonates and young children. Adult-onset intradural spinal teratoma is even rare. The aim of this study was to discuss the clinical characteristics, diagnosis and therapeutic strategies of adult-onset intradural spinal teratoma. This retrospective study included 18 consecutive adult patients with intradural teratoma who were surgically treated in our center between 1998 and 2013. The clinical features, pathogenesis, diagnostic strategies and surgical outcomes were discussed. Neurological function outcomes were evaluated by the JOA scoring system. Of the 18 included patients, 4 patients received subtotal resection and the other 14 patients received total resection. All the 18 cases were diagnosed with mature teratoma. The mean follow-up period was 79.7 (median 60.5; range 27-208) months. Local recurrence occurred in two of the four patients who underwent subtotal resection and in no patient who underwent total resection. The neurologic status improved in 16 cases and remained unchanged in the other two patients. Adult-onset intradural spinal teratoma is extremely rare. To the best of our knowledge, this is the largest series of patients with this disease. Despite the slow-growth and indolent nature, radical resection remains the recommended treatment to reduce tumor recurrence.

Prediction of critical heat flux by a new local condition hypothesis

International Nuclear Information System (INIS)

Im, J. H.; Jun, K. D.; Sim, J. W.; Deng, Zhijian

1998-01-01

Critical Heat Flux(CHF) was predicted for uniformly heated vertical round tube by a new local condition hypothesis which incorporates a local true steam quality. This model successfully overcame the difficulties in predicted the subcooled and quality CHF by the thermodynamic equilibrium quality. The local true steam quality is a dependent variable of the thermodynamic equilibrium quality at the exit and the quality at the Onset of Significant Vaporization(OSV). The exit thermodynamic equilibrium quality was obtained from the heat balance, and the quality at OSV was obtained from the Saha-Zuber correlation. In the past CHF has been predicted by the experimental correlation based on local or non-local condition hypothesis. This preliminary study showed that all the available world data on uniform CHF could be predicted by the model based on the local condition hypothesis

Localization of weakly interacting Bose gas in quasiperiodic potential

International Nuclear Information System (INIS)

Ray, Sayak; Pandey, Mohit; Ghosh, Anandamohan; Sinha, Subhasis

2016-01-01

We study the localization properties of weakly interacting Bose gas in a quasiperiodic potential. The Hamiltonian of the non-interacting system reduces to the well known ‘Aubry–André model’, which shows the localization transition at a critical strength of the potential. In the presence of repulsive interaction we observe multi-site localization and obtain a phase diagram of the dilute Bose gas by computing the superfluid fraction and the inverse participation ratio. We construct a low-dimensional classical Hamiltonian map and show that the onset of localization is manifested by the chaotic phase space dynamics. The level spacing statistics also identify the transition to localized states resembling a Poisson distribution that are ubiquitous for both non-interacting and interacting systems. We also study the quantum fluctuations within the Bogoliubov approximation and compute the quasiparticle energy spectrum. Enhanced quantum fluctuation and multi-site localization phenomenon of non-condensate density are observed above the critical coupling of the potential. We briefly discuss the effect of the trapping potential on the localization of matter wave. (paper)

Pathway discovery using transcriptomic profiles in adult-onset severe asthma

DEFF Research Database (Denmark)

Hekking, Pieter-Paul; Loza, Matt J; Pavlidis, Stelios

2017-01-01

in nasal brushings (5 signatures), sputum (3 signatures), and endobronchial brushings (6 signatures). Signatures associated with eosinophilic airway inflammation, mast cells, and group 3 innate lymphoid cells were more enriched in adult-onset severe asthma, whereas signatures associated with induced lung...... injury were less enriched in adult-onset severe asthma. CONCLUSIONS: Adult-onset severe asthma is characterized by inflammatory pathways involving eosinophils, mast cells, and group 3 innate lymphoid cells. These pathways could represent useful targets for the treatment of adult-onset severe asthma....

Effects of melatonin and bright light treatment in childhood chronic sleep onset insomnia with late melatonin onset: A randomised controlled study

NARCIS (Netherlands)

van Maanen, A.; Meijer, A.M.; Smits, M.G.; van der Heijden, K.B.; Oort, F.J.

2017-01-01

STUDY OBJECTIVES: Chronic sleep onset insomnia with late melatonin onset is prevalent in childhood, and has negative daytime consequences. Melatonin treatment is known to be effective in treating these sleep problems. Bright light therapy might be an alternative treatment, with potential advantages

Cerebellar ataxia of early onset

International Nuclear Information System (INIS)

Yamashita, Sumimasa; Miyake, Shota; Yamada, Michiko; Iwamoto, Hiroko; Yamada, Kazuhiko.

1989-01-01

Eight cases of childhood cerebellar ataxia were reported. All these cases showed chronic cerebellar ataxia with early onset, and the other diseases of cerebellum such as infections, neoplasms and storage diseases were excluded by clinical symptoms and laboratory findings including blood counts, blood chemistry, lactate, pyruvate, ceruloplasmine, urinalysis, serum immunoglobulins, amino acid analysis in blood and urine, CSF analysis, leukocyte lysosomal enzymes, MCV, EMG, EEG and brain X-CT. Two pairs of siblings were included in this study. The clinical diagnosis were cerebellar type (5), spinocerebellar type (1), one Marinesco-Sjoegren syndrome and undetermined type (1). The age of onset was 1 to 5 years. The chief complaint was motor developmental delay in 6 cases; among them 5 patients could walk alone at the ages of 2 to 3 years'. Mental retardation was observed in 7 cases and epilepsy in 2. TRH was effective in 5 cases. The MRI study revealed that the area of medial sagittal slice of the cerebellum was reduced significantly in all cases and also that of pons was reduced in 5 cases. Different from typical adult onset spinocerebellar degenerations, most of the present cases have achieved slow developmental milestones and the clinical course was not progressive. Genetic factors are suspected in the pathogenesis of this disease in some cases. (author)

Early- versus Late-Onset Dysthymia: A Meaningful Clinical Distinction?

OpenAIRE

Sansone, Randy A.; Sansone, Lori A.

2009-01-01

In the current Diagnostic and Statistical Manual of Mental Disorders, dysthymic disorder is categorized as either early-onset or late-onset, based upon the emergence of symptoms before or after the age of 21, respectively. Does this diagnostic distinction have any meaningful clinical implications? In this edition of The Interface, we present empirical studies that have, within a single study, compared individuals with early-versus late-onset dysthymia. In this review, we found that, compared ...

Contextual risks linking parents' adolescent marijuana use to offspring onset.

Science.gov (United States)

Kerr, David C R; Tiberio, Stacey S; Capaldi, Deborah M

2015-09-01

We studied the extent to which parent marijuana use in adolescence is associated with marijuana use onset in offspring through contextual family and peer risks. Fathers assessed (n=93) since childhood, their 146 offspring (n=83 girls), and offspring's mothers (n=85) participated in a longitudinal study. Using discrete-time survival analysis, fathers' (prospectively measured) and mothers' (retrospective) adolescent marijuana use was used to predict offspring marijuana use onset through age 19 years. Parental monitoring, child exposure to marijuana use, peer deviance, peer marijuana use, and perceptions of parent disapproval of child use were measured before or concurrent with onset. Parents' adolescent marijuana use was significantly associated with less monitoring, offspring alcohol use, the peer behaviors, exposure to adult marijuana use, and perceptions of less parent disapproval. Male gender and the two peer behaviors were positively associated with children's marijuana use onset, controlling for their alcohol use. Parents' adolescent marijuana use had a significant indirect effect on child onset through children's deviant peer affiliations and a composite contextual risk score. Parents' histories of marijuana use may contribute indirectly to children's marijuana use onset through their influence on the social environments children encounter; specifically, those characterized by more liberal use norms, exposure to marijuana use and deviant and marijuana-using peers, and less adult supervision. Given that alcohol use onset was controlled, findings suggest that the contextual factors identified here confer unique risk for child marijuana use onset. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Fine-tuning the onset of myogenesis by homeobox proteins that interact with the Myf5 limb enhancer

Directory of Open Access Journals (Sweden)

Philippe Daubas

2015-12-01

Full Text Available Skeletal myogenesis in vertebrates is initiated at different sites of skeletal muscle formation during development, by activation of specific control elements of the myogenic regulatory genes. In the mouse embryo, Myf5 is the first myogenic determination gene to be expressed and its spatiotemporal regulation requires multiple enhancer sequences, extending over 120 kb upstream of the Mrf4-Myf5 locus. An enhancer, located at −57/−58 kb from Myf5, is responsible for its activation in myogenic cells derived from the hypaxial domain of the somite, that will form limb muscles. Pax3 and Six1/4 transcription factors are essential activators of this enhancer, acting on a 145-bp core element. Myogenic progenitor cells that will form the future muscle masses of the limbs express the factors necessary for Myf5 activation when they delaminate from the hypaxial dermomyotome and migrate into the forelimb bud, however they do not activate Myf5 and the myogenic programme until they have populated the prospective muscle masses. We show that Msx1 and Meox2 homeodomain-containing transcription factors bind in vitro and in vivo to specific sites in the 145-bp element, and are implicated in fine-tuning activation of Myf5 in the forelimb. Msx1, when bound between Pax and Six sites, prevents the binding of these key activators, thus inhibiting transcription of Myf5 and consequent premature myogenic differentiation. Meox2 is required for Myf5 activation at the onset of myogenesis via direct binding to other homeodomain sites in this sequence. Thus, these homeodomain factors, acting in addition to Pax3 and Six1/4, fine-tune the entry of progenitor cells into myogenesis at early stages of forelimb development.

Fine-tuning the onset of myogenesis by homeobox proteins that interact with the Myf5 limb enhancer

Science.gov (United States)

Daubas, Philippe; Duval, Nathalie; Bajard, Lola; Langa Vives, Francina; Robert, Benoît; Mankoo, Baljinder S.; Buckingham, Margaret

2015-01-01

ABSTRACT Skeletal myogenesis in vertebrates is initiated at different sites of skeletal muscle formation during development, by activation of specific control elements of the myogenic regulatory genes. In the mouse embryo, Myf5 is the first myogenic determination gene to be expressed and its spatiotemporal regulation requires multiple enhancer sequences, extending over 120 kb upstream of the Mrf4-Myf5 locus. An enhancer, located at −57/−58 kb from Myf5, is responsible for its activation in myogenic cells derived from the hypaxial domain of the somite, that will form limb muscles. Pax3 and Six1/4 transcription factors are essential activators of this enhancer, acting on a 145-bp core element. Myogenic progenitor cells that will form the future muscle masses of the limbs express the factors necessary for Myf5 activation when they delaminate from the hypaxial dermomyotome and migrate into the forelimb bud, however they do not activate Myf5 and the myogenic programme until they have populated the prospective muscle masses. We show that Msx1 and Meox2 homeodomain-containing transcription factors bind in vitro and in vivo to specific sites in the 145-bp element, and are implicated in fine-tuning activation of Myf5 in the forelimb. Msx1, when bound between Pax and Six sites, prevents the binding of these key activators, thus inhibiting transcription of Myf5 and consequent premature myogenic differentiation. Meox2 is required for Myf5 activation at the onset of myogenesis via direct binding to other homeodomain sites in this sequence. Thus, these homeodomain factors, acting in addition to Pax3 and Six1/4, fine-tune the entry of progenitor cells into myogenesis at early stages of forelimb development. PMID:26538636

Clinical and genetic study of a juvenile-onset Huntington disease

Directory of Open Access Journals (Sweden)

HAO Ying

2012-06-01

Full Text Available Background Huntington's disease (HD is an autosomal dominant hereditary progressive neurodegenerative disorder with a distinct phenotype characterized by chorea, dementia, cognitive and affective impairment. There are selective neural cell loss and atrophy in the caudate and putamen. Dr. George Huntington firstly described the disease accurately and insightfully, which led to a widespread recognition of the inherited chorea that now bears his name. Huntington disease gene (IT15 locus on chromosome 4p16.3, and encompasses 67 exons with a trinucleotide repeat (CAG in the first exon. The CAG repeat length is highly polymorphic in the population and expanded on at least one chromosome of individuals with HD. Clinically, patient with HD are often onset in adulthood. Juvenile-onset HD is relatively rare. Adult-onset HD patients usually have a CAG expansion from 40 to 55 whereas those with juvenile-onset greater than 60 which are often inherited from the father. We investigated the clinical features of a juvenile-onset case with Huntington disease and dynamic mutation of his family. Methods The CAG repeats of IT15 gene were detected using polymerase chain reaction and capillary electrophoresis in 115 individuals with preliminary diagnosis as Huntington disease. The repeat numbers of some samples carried expanded or intermediate alleles were verified by the pMD18-T vector clone sequencing. Results Fragment analysis showed that one juvenile-onset case presenting with cognitive dysfunction and hypokinesis carried 15/68 CAG repeats of IT15. His father carried 17/37 and mother carried 15/17. Conclusion 1 The juvenile-onset case of HD presented with different clinical features compared with adult-onset cases. The typical signs of adult-onset cases include progressive chorea, rigidity and dementia. The most common sign of juvenile-onset Huntington disease is cognitive decline. 2 The dynamic mutation of IT15 gene expansion of the CAG repeats in the

Local geomagnetic events associated with displacements on the san andreas fault.

Science.gov (United States)

Breiner, S; Kovach, R L

1967-10-06

The piezomagnetic properties of rock suggest that a change in subsurface stress will manifest itself as a change in the magnetic susceptibility and remanent magnetization and hence the local geomagnetic field. A differential array of magnetometers has been operating since late 1965 on the San Andreas fault in the search for piezomagnetic signals under conditions involving active fault stress. Local changes in the geomagnetic field have been observed near Hollister, California, some tens of hours preceding the onset of abrupt creep displacement on the San Andreas fault.

Gamelan Music Onset Detection based on Spectral Features

Directory of Open Access Journals (Sweden)

Yoyon Kusnendar Suprapto

2013-03-01

Full Text Available This research detects onsets of percussive instruments by examining the performance on the sound signals of gamelan instruments as one of traditional music instruments in Indonesia. Onset plays important role in determining musical rythmic structure, like beat, tempo, and is highly required in many applications of music information retrieval. There are four onset detection methods compared that employ spectral features, such as magnitude, phase, and the combination of both, which are phase slope (PS, weighted phase deviation (WPD, spectral flux (SF, and rectified complex domain (RCD. These features are extracted by representing the sound signals into time-frequency domain using overlapped Short-time Fourier Transform (STFT and varying the window length. Onset detection functions are processed through peak-picking using dynamic threshold. The results showed that by using suitable window length and parameter setting of dynamic threshold, F-measure which is greater than 0.80 can be obtained for certain methods.

Childhood-Onset Essential Hypertension and the Family Structure.

Science.gov (United States)

Gupta-Malhotra, Monesha; Hashmi, Syed Shahrukh; Barratt, Michelle S; Milewicz, Dianna M; Shete, Sanjay

2016-05-01

The prevalence and effect of single-parent families in childhood-onset essential hypertension (EH) is unknown. Children with EH and age-, sex-, and ethnicity-matched controls were enrolled. Family structure data were obtained by in-person interview. A total of 148 families (76 hypertension probands, 72 control probands; median 14 years) were prospective-ly enrolled in the study. Single-parent status was seen in 42% of the families--with and without EH (38% vs 46%, P=.41; odds ratio, 0.7; 95% confidence interval, 0.4-1.4). After multivariable analysis, a statistically significant sociofamilial contributor to the development of childhood-onset EH was not identified. A significant number of single-parent families (42%), the majority with single mothers, were found in our pedigree study. Sociofamilial factors are known to contribute to the expression of adult-onset EH, but findings in our study suggest that they appear to contribute less in the expression of childhood-onset EH. ©2015 Wiley Periodicals, Inc.

Black patients sustain vision loss while White and South Asian patients gain vision following delamination or segmentation surgery for tractional complications associated with proliferative diabetic retinopathy.

Science.gov (United States)

Mastropasqua, R; Luo, Y H-L; Cheah, Y S; Egan, C; Lewis, J J; da Cruz, L

2017-10-01

PurposeThis retrospective comparative case series aims to determine whether patient ethnicity (White versus South Asian versus Black) is related to the outcome of surgical treatment for traction complications of severe proliferative diabetic retinopathy (PDR).SettingMoorfields Eye Hospital London, UK.MethodsAll patients who underwent vitrectomy with, delamination and/or segmentation for PDR over a 5-year period (2009-2014) were reviewed retrospectively. Patients were divided into White, South Asian or Black groups, and their age, gender, HbA1C and type of diabetes were recorded. A total of 484 patients (253 White, 117 South Asian, 114 Black) were included. Twenty-one patients were excluded due to inadequate documentation.OutcomesLogMAR Visual acuity (converted from Snellen) (VA), was recorded pre-operatively and ~6 months post surgery (range 5-8 months). Surgical outcome was classified according to the type and duration of tamponade required post-operatively.ResultsPre-operative VA and HbA1C values were similar across all three ethnic groups (P=0.64 and 0.569, respectively). Change in VA (mean±SD) was 0.41±0.78, 0.14±0.76 and -0.26±0.57 in White, South Asian and Black patient groups respectively (PAsian patient groups.ConclusionsThis study demonstrates that Black patients on average lose vision following delamination surgery for traction complications of PDR while White and South Asian patients gain vision. The same group is also at higher risk of retaining silicone more than 6 months after surgery. This difference remains even when corrected for glycaemic control. The higher risk of visual loss and long-term retention of silicone oil in black patients requires further investigation. If these results are confirmed, surgeons should consider their patients' ethnicity before proceeding with surgical treatment of diabetic tractional detachment.

Strong family history and early onset of schizophrenia: about 2 ...

African Journals Online (AJOL)

Schizophrenia is a highly heritable psychotic disorder and high genetic loading is associated with early onset of the disease. The outcome of schizophrenia has also been linked with the age of onset as well as the presence of family history of the disease. Therefore families with patients with early onset Schizophrenia are ...

Exercise and Early-Onset Alzheimer’s Disease: Theoretical Considerations

Directory of Open Access Journals (Sweden)

Astrid M. Hooghiemstra

2012-04-01

Full Text Available Background/Aims: Although studies show a negative relationship between physical activity and the risk for cognitive impairment and late-onset Alzheimer’s disease, studies concerning early-onset Alzheimer’s disease (EOAD are lacking. This review aims to justify the value of exercise interventions in EOAD by providing theoretical considerations that include neurobiological processes. Methods: A literature search on key words related to early-onset dementia, exercise, imaging, neurobiological mechanisms, and cognitive reserve was performed. Results/Conclusion: Brain regions and neurobiological processes contributing to the positive effects of exercise are affected in EOAD and, thus, provide theoretical support for exercise interventions in EOAD. Finally, we present the design of a randomized controlled trial currently being conducted in early-onset dementia patients.

Pattern selection near the onset of convection in binary mixtures in cylindrical cells

International Nuclear Information System (INIS)

Alonso, Arantxa; Mercader, Isabel; Batiste, Oriol

2014-01-01

We report numerical investigations of three-dimensional pattern formation of binary mixtures in a vertical cylindrical container heated from below. Negative separation ratio mixtures, for which the onset of convection occurs via a subcritical Hopf bifurcation, are considered. We focus on the dynamics in the neighbourhood of the initial oscillatory instability and analyze the spatio-temporal properties of the patterns for different values of the aspect ratio of the cell, 0.25≲Γ≲11 (Γ≡R/d, where R is the radius of the cell and d its height). Despite the oscillatory nature of the primary instability, for highly constrained geometries, Γ≲2.5, only pure thermal stationary modes are selected after long transients. As the aspect ratio of the cell increases, for intermediate aspect ratio cells such as Γ=3, multistability and coexistence of stationary and time-dependent patterns is observed. In highly extended cylinders, Γ≈11, the dynamics near the onset is completely different from the pure fluid case, and a startling diversity of confined patterns is observed. Many of these patterns are consistent with experimental observations. Remarkably, though, we have obtained persistent large amplitude highly localized states not reported previously. (paper)

Pattern selection near the onset of convection in binary mixtures in cylindrical cells

Energy Technology Data Exchange (ETDEWEB)

Alonso, Arantxa; Mercader, Isabel; Batiste, Oriol, E-mail: arantxa@fa.upc.edu [Departament de Física Aplicada, Universitat Politècnica de Catalunya, Mòdul B4, 08034 Barcelona (Spain)

2014-08-01

We report numerical investigations of three-dimensional pattern formation of binary mixtures in a vertical cylindrical container heated from below. Negative separation ratio mixtures, for which the onset of convection occurs via a subcritical Hopf bifurcation, are considered. We focus on the dynamics in the neighbourhood of the initial oscillatory instability and analyze the spatio-temporal properties of the patterns for different values of the aspect ratio of the cell, 0.25≲Γ≲11 (Γ≡R/d, where R is the radius of the cell and d its height). Despite the oscillatory nature of the primary instability, for highly constrained geometries, Γ≲2.5, only pure thermal stationary modes are selected after long transients. As the aspect ratio of the cell increases, for intermediate aspect ratio cells such as Γ=3, multistability and coexistence of stationary and time-dependent patterns is observed. In highly extended cylinders, Γ≈11, the dynamics near the onset is completely different from the pure fluid case, and a startling diversity of confined patterns is observed. Many of these patterns are consistent with experimental observations. Remarkably, though, we have obtained persistent large amplitude highly localized states not reported previously. (paper)

The poor prognosis of childhood-onset bipolar disorder

NARCIS (Netherlands)

Leverich, Gabriele S.; Post, Robert M.; Keck, Paul E.; Altshuler, Lori L.; Frye, Mark A.; Kupka, Ralph W.; Nolen, Willem A.; Suppes, Trisha; McElroy, Susan L.; Grunze, Heinz; Denicoff, Kirk; Moravec, Maria K. M.; Luckenbaugh, David

Objective We examined age of onset of bipolar disorder as a potential course-of-iflness modifier with the hypothesis that early onset will engender more severe illness. Study design A total of 480 carefully diagnosed adult outpatients with bipolar disorder (mean age, 42.5 +/- 11.6 years) were

Mode I type delamination fracture toughness of YBCO coated conductor with additional Cu layer

International Nuclear Information System (INIS)

Miyazato, T.; Hojo, M.; Sugano, M.; Adachi, T.; Inoue, Y.; Shikimachi, K.; Hirano, N.; Nagaya, S.

2011-01-01

A fracture toughness test method was developed for a YBCO coated conductor with an additional Cu layer. Mode I type tests were carried out using double cantilever beam (DCB) specimens. Delamination propagated into the YBCO layer, and sometimes reached the Ag/YBCO interface. The fracture toughness for YBCO was about 10 J/m 2 . That for Ag/YBCO interface was about 100 J/m 2 . Although interlaminar fracture at a YBa 2 Cu 3 O 7-δ (YBCO)/CeO 2 interface was reported for YBCO coated conductors, this has not yet been investigated by a fracture mechanical approach. In the present study, we developed a mode I type fracture toughness test method for a YBCO coated conductor with an additional Cu layer using double cantilever beam (DCB) specimens. Fracture mechanism was investigated by microscopic observation by a scanning electron microscope (SEM), together with composition analysis by an energy dispersive X-ray spectroscope (EDS). A pre-crack introduced at the YBCO/CeO 2 interface deviated from the interface, and propagated into the YBCO layer, and sometimes reached the Ag/YBCO interface. The fracture toughness, G R , for YBCO and the Ag/YBCO interface was evaluated to be 7-10 J/m 2 and 80-120 J/m 2 , respectively. The complex stress intensity factor ratio, K 2 /K 1 , at YBCO/CeO 2 interface was evaluated to be -0.19, and this ratio controlled the formation of microcracks in the YBCO layer. The main crack propagated into the YBCO layer accompanied with the formation of microcracks.

Using glass-graded zirconia to increase delamination growth resistance in porcelain/zirconia dental structures.

Science.gov (United States)

Chai, Herzl; Mieleszko, Adam J; Chu, Stephen J; Zhang, Yu

2018-01-01

Porcelain fused to zirconia (PFZ) restorations are widely used in prosthetic dentistry. However, their tendency to delaminate along the P/Z interface remains a practical problem so that assessing and improving the interfacial strength are important design aspects. This work examines the effect of modifying the zirconia veneering surface with an in-house felspathic glass on the interfacial fracture resistance of fused P/Z. Three material systems are studied: porcelain fused to zirconia (control) and porcelain fused to glass-graded zirconia with and without the presence of a glass interlayer. The specimens were loaded in a four-point-bend fixture with the porcelain veneer in tension. The evolution of damage is followed with the aid of a video camera. The interfacial fracture energy G C was determined with the aid of a FEA, taking into account the stress shielding effects due to the presence of adjacent channel cracks. Similarly to a previous study on PFZ specimens, the fracture sequence consisted of unstable growth of channel cracks in the veneer followed by stable cracking along the P/Z interface. However, the value of GC for the graded zirconia was approximately 3 times that of the control zirconia, which is due to the good adhesion between porcelain and the glass network structure on the zirconia surface. Combined with its improved bonding to resin-based cements, increased resistance to surface damage and good esthetic quality, graded zirconia emerges as a viable material concept for dental restorations. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Early-onset Alzheimer's Disease Phenotypes: Neuropsychology and Neural Networks

Science.gov (United States)

2017-05-11

Alzheimer Disease, Early Onset; Alzheimer Disease; Alzheimer Disease, Late Onset; Dementia, Alzheimer Type; Logopenic Progressive Aphasia; Primary Progressive Aphasia; Visuospatial/Perceptual Abilities; Posterior Cortical Atrophy; Executive Dysfunction; Corticobasal Degeneration; Ideomotor Apraxia

Common pathogenic effects of missense mutations in the P-type ATPase ATP13A2 (PARK9) associated with early-onset parkinsonism.

Science.gov (United States)

Podhajska, Agata; Musso, Alessandra; Trancikova, Alzbeta; Stafa, Klodjan; Moser, Roger; Sonnay, Sarah; Glauser, Liliane; Moore, Darren J

2012-01-01

Mutations in the ATP13A2 gene (PARK9) cause autosomal recessive, juvenile-onset Kufor-Rakeb syndrome (KRS), a neurodegenerative disease characterized by parkinsonism. KRS mutations produce truncated forms of ATP13A2 with impaired protein stability resulting in a loss-of-function. Recently, homozygous and heterozygous missense mutations in ATP13A2 have been identified in subjects with early-onset parkinsonism. The mechanism(s) by which missense mutations potentially cause parkinsonism are not understood at present. Here, we demonstrate that homozygous F182L, G504R and G877R missense mutations commonly impair the protein stability of ATP13A2 leading to its enhanced degradation by the proteasome. ATP13A2 normally localizes to endosomal and lysosomal membranes in neurons and the F182L and G504R mutations disrupt this vesicular localization and promote the mislocalization of ATP13A2 to the endoplasmic reticulum. Heterozygous T12M, G533R and A746T mutations do not obviously alter protein stability or subcellular localization but instead impair the ATPase activity of microsomal ATP13A2 whereas homozygous missense mutations disrupt the microsomal localization of ATP13A2. The overexpression of ATP13A2 missense mutants in SH-SY5Y neural cells does not compromise cellular viability suggesting that these mutant proteins lack intrinsic toxicity. However, the overexpression of wild-type ATP13A2 may impair neuronal integrity as it causes a trend of reduced neurite outgrowth of primary cortical neurons, whereas the majority of disease-associated missense mutations lack this ability. Finally, ATP13A2 overexpression sensitizes cortical neurons to neurite shortening induced by exposure to cadmium or nickel ions, supporting a functional interaction between ATP13A2 and heavy metals in post-mitotic neurons, whereas missense mutations influence this sensitizing effect. Collectively, our study provides support for common loss-of-function effects of homozygous and heterozygous missense

Adult-onset nemaline myopathy presenting as respiratory failure.

LENUS (Irish Health Repository)

Kelly, Emer

2008-11-01

Nemaline myopathy is a rare congenital myopathy that generally presents in childhood. We report a case of a 44-year-old man who presented with severe hypoxic hypercapnic respiratory failure as the initial manifestation of nemaline myopathy. After starting noninvasive ventilation, his pulmonary function test results improved substantially, and over the 4 years since diagnosis his respiratory function remained stable. There are few reported cases of respiratory failure in patients with adult-onset nemaline myopathy, and the insidious onset in this case is even more unusual. This case highlights the varied presenting features of adult-onset nemaline myopathy and that noninvasive ventilation improves respiratory function.

Role of heavy ionospheric ions in the localization of substorm disturbances on March 22, 1979: CDAW 6

International Nuclear Information System (INIS)

Baker, D.N.; Fritz, T.A.; Lennartsson, W.; Wilken, B.; Kroehl, H.W.; Birn, J.

1985-01-01

Extensive ground-based arrays of magnetometers and numerous satellite platforms in the outer magnetosphere have established that two separate substorm expansion onsets occurred on March 22, 1979. The first of these occurred at 1055 UT and is demonstrated to be localized in the 0200--0300 LT sector. Concurrent plasma sheet ion composition measurements are used to show that the growth and expansion phase of this substorm occurred while the outer magnetosphere was composed dominantly of solar wind (H + and He ++ ) plasmas. The 1055 UT substorm greatly perturbed and altered the ion composition of the plasma in the outer magnetosphere such that the second substorm expansion onset (1436 UT) occurred while the outer magnetospheric plasmas were dominantly of ionospheric (O + ) origin. The 1436 UT substorm is shown to have a component of the westward electrojet localized further westward in local time relative to the first substorm. These results are a consistent, well-documented example of the possible important role of heavy ions in the localization and initiation of plasma sheet instabilities during substorms

Impact behavior of basalt/epoxy composite: Comparison between flat and twill fabric

Science.gov (United States)

Papa, I.; Ricciardi, M. R.; Antonucci, V.; Langella, A.; Lopresto, V.

2018-05-01

Two types of basalt fibre reinforced epoxy laminates were realized by overlapping flat and twill woven basalt fabrics by resin infusion. Rectangular specimens, cut from the panels were impacted at penetration and at increasing energy values, to investigate the damage onset and propagation. A non-destructive technique, Ultrasound testing (UT), was adopted to investigate the internal damage. Despite the difficulties to obtain information by UT method due to the high amount of signal absorbed, the technique, properly calibrated, proved to be very useful in providing information about the presence, the shape and the extent of the delaminations. The results were compared at the aim to investigate the effect of the fiber architecture (textile). The experimental results indicate a similar impact behavior between basalt flat and twill composites but in the case of the twill a minor delaminated area was detected, even if a higher absorbed energy was recorded

Early onset obsessive-compulsive disorder with and without tics.

Science.gov (United States)

de Mathis, Maria Alice; Diniz, Juliana B; Shavitt, Roseli G; Torres, Albina R; Ferrão, Ygor A; Fossaluza, Victor; Pereira, Carlos; Miguel, Eurípedes; do Rosario, Maria Conceicão

2009-07-01

Research suggests that obsessive-compulsive disorder (OCD) is not a unitary entity, but rather a highly heterogeneous condition, with complex and variable clinical manifestations. The aims of this study were to compare clinical and demographic characteristics of OCD patients with early and late age of onset of obsessive-compulsive symptoms (OCS); and to compare the same features in early onset OCD with and without tics. The independent impact of age at onset and presence of tics on comorbidity patterns was investigated. Three hundred and thirty consecutive outpatients meeting Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition criteria for OCD were evaluated: 160 patients belonged to the "early onset" group (EOG): before 11 years of age, 75 patients had an "intermediate onset" (IOG), and 95 patients were from the "late onset" group (LOG): after 18 years of age. From the 160 EOG, 60 had comorbidity with tic disorders. The diagnostic instruments used were: the Yale-Brown Obsessive Compulsive Scale and the Dimensional Yale-Brown Obsessive Compulsive Scale (DY-BOCS), Yale Global Tics Severity Scale, and Structured Clinical Interview for DSM-IV Axis I Disorders-patient edition. Statistical tests used were: Mann-Whitney, full Bayesian significance test, and logistic regression. The EOG had a predominance of males, higher frequency of family history of OCS, higher mean scores on the "aggression/violence" and "miscellaneous" dimensions, and higher mean global DY-BOCS scores. Patients with EOG without tic disorders presented higher mean global DY-BOCS scores and higher mean scores in the "contamination/cleaning" dimension. The current results disentangle some of the clinical overlap between early onset OCD with and without tics.

Lithospheric delamination in post-collisional setting: Evidence from intrusive magmatism from the North Qilian orogen to southern margin of the Alxa block, NW China

Science.gov (United States)

Zhang, Liqi; Zhang, Hongfei; Zhang, Shasha; Xiong, Ziliang; Luo, Biji; Yang, He; Pan, Fabin; Zhou, Xiaochun; Xu, Wangchun; Guo, Liang

2017-09-01

Post-collisional granitoids are widespread in the North Qilian and southern margin of the Alxa block and their petrogenesis can provide important insights into the lithospheric processes in a post-collisional setting. This paper carries out an integrated study of U-Pb zircon dating, geochemical and Sr-Nd-Hf isotopic compositions for five early Paleozoic intrusive plutons from the North Qilian to southern margin of the Alxa block. The geochronological and geochemical results show that their magmatism can be divided into three periods with distinct geochemical features. The early-period intrusive rocks ( 440 Ma) include the Lianhuashan (LHS) and Mengjiadawan (MJDW) granodiorites. Both of them display high Sr/Y ratios (52-91), coupled with low Y and HREE contents, implying that they were derived from partial melting of thickened lower crust, with garnet in the residue. The middle-period intrusive rocks ( 430 Ma), including the MJDW quartz diorites and Yangqiandashan (YQDS) granodiorites, are high-K calc-alkaline with low Sr/Y values. The geochemical and isotopic data suggest that they are generated from partial melting of lower crust without garnet in the residue. The late-period intrusive rocks (414-422 Ma), represented by the Shengrongsi (SRS) and Xinkaigou (XKG) plutons, are A-type or alkali-feldspar granites. They are possibly derived from partial melting of felsic crustal material under lower pressure condition. Our data show decreasing magma crystallization ages from MJDW pluton in the north and LHS pluton in the south to the SRS and XKG plutons in the central part of the study area. We suggest that such spatial and temporal variations of magmatic suites were caused by lithospheric delamination after the collision between the Central Qilian and the Alxa block. A more plausible explanation is that the delamination propagated from the margin part of the thickened lithosphere to inward beneath the North Qilian and southern margin of the Alxa block.

Progression of Late-Onset Stargardt Disease.

Science.gov (United States)

Lambertus, Stanley; Lindner, Moritz; Bax, Nathalie M; Mauschitz, Matthias M; Nadal, Jennifer; Schmid, Matthias; Schmitz-Valckenberg, Steffen; den Hollander, Anneke I; Weber, Bernhard H F; Holz, Frank G; van der Wilt, Gert Jan; Fleckenstein, Monika; Hoyng, Carel B

2016-10-01

Identification of sensitive biomarkers is essential to determine potential effects of emerging therapeutic trials for Stargardt disease. This study aimed to describe the natural history of late-onset Stargardt, and demonstrates the accuracy of retinal pigment epithelium (RPE) atrophy progression as an outcome measure. We performed a retrospective cohort study collecting multicenter data from 47 patients (91 eyes) with late-onset Stargardt, defined by clinical phenotype, at least one ABCA4 mutation, and age at disease onset ≥ 45 years. We analyzed RPE atrophy progression on fundus autofluorescence and near-infrared reflectance imaging using semiautomated software and a linear mixed model. We performed sample size calculations to assess the power in a simulated 2-year interventional study and assessed visual endpoints using time-to-event analysis. Over time, progression of RPE atrophy was observed (mean: 0.22 mm/year, 95% confidence interval [CI]: 0.19-0.27). By including only patients with bilateral RPE atrophy in a future trial, 32 patients are needed to reach a power of 83.9% (95% CI: 83.1-84.6), assuming a fixed therapeutic effect size of 30%. We found a median interval between disease onset and visual acuity decline to 20/32, 20/80, and 20/200 of 2.74 (95% CI: 0.54-4.41), 10.15 (95% CI: 6.13-11.38), and 11.38 (95% CI: 6.13-13.34) years, respectively. We show that RPE atrophy represents a robust biomarker to monitor disease progression in future therapeutic trials. In contrast, the variability in terms of the course of visual acuity was high.

Delaying the onset of Alzheimer disease

Science.gov (United States)

Craik, Fergus I.M.; Bialystok, Ellen; Freedman, Morris

2010-01-01

Objectives: There is strong epidemiologic evidence to suggest that older adults who maintain an active lifestyle in terms of social, mental, and physical engagement are protected to some degree against the onset of dementia. Such factors are said to contribute to cognitive reserve, which acts to compensate for the accumulation of amyloid and other brain pathologies. We present evidence that lifelong bilingualism is a further factor contributing to cognitive reserve. Methods: Data were collected from 211 consecutive patients diagnosed with probable Alzheimer disease (AD). Patients' age at onset of cognitive impairment was recorded, as was information on occupational history, education, and language history, including fluency in English and any other languages. Following this procedure, 102 patients were classified as bilingual and 109 as monolingual. Results: We found that the bilingual patients had been diagnosed 4.3 years later and had reported the onset of symptoms 5.1 years later than the monolingual patients. The groups were equivalent on measures of cognitive and occupational level, there was no apparent effect of immigration status, and the monolingual patients had received more formal education. There were no gender differences. Conclusions: The present data confirm results from an earlier study, and thus we conclude that lifelong bilingualism confers protection against the onset of AD. The effect does not appear to be attributable to such possible confounding factors as education, occupational status, or immigration. Bilingualism thus appears to contribute to cognitive reserve, which acts to compensate for the effects of accumulated neuropathology. GLOSSARY AD = Alzheimer disease; MMSE = Mini-Mental State Examination. PMID:21060095

In Search of a Time Efficient Approach to Crack and Delamination Growth Predictions in Composites

Science.gov (United States)

Krueger, Ronald; Carvalho, Nelson

2016-01-01

Analysis benchmarking was used to assess the accuracy and time efficiency of algorithms suitable for automated delamination growth analysis. First, the Floating Node Method (FNM) was introduced and its combination with a simple exponential growth law (Paris Law) and Virtual Crack Closure technique (VCCT) was discussed. Implementation of the method into a user element (UEL) in Abaqus/Standard(Registered TradeMark) was also presented. For the assessment of growth prediction capabilities, an existing benchmark case based on the Double Cantilever Beam (DCB) specimen was briefly summarized. Additionally, the development of new benchmark cases based on the Mixed-Mode Bending (MMB) specimen to assess the growth prediction capabilities under mixed-mode I/II conditions was discussed in detail. A comparison was presented, in which the benchmark cases were used to assess the existing low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) in comparison to the FNM-VCCT fatigue growth analysis implementation. The low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) was able to yield results that were in good agreement with the DCB benchmark example. Results for the MMB benchmark cases, however, only captured the trend correctly. The user element (FNM-VCCT) always yielded results that were in excellent agreement with all benchmark cases, at a fraction of the analysis time. The ability to assess the implementation of two methods in one finite element code illustrated the value of establishing benchmark solutions.

[Juvenile-onset ankylosing spondylitis].

Science.gov (United States)

Menkes, C J; Job-Deslandre, C; Feldmann, J L

1984-02-16

Ankylosing spondylitis (AS) with juvenile onset (under 17 years of age) is not infrequent. Thirty-six cases were studied, amounting to 18% of patients hospitalized between 1977 and 1981. The following criteria were used for diagnosis: radiologic sacroiliitis (typical AS), presence of HLA B27 and/or pelvic or vertebral clinical manifestations (possible AS). 31 patients (85%) were boys. Mean age at onset was 12.3 +/- 2.8 years. In three cases, AS was found in a member of the family of the propositus and in one case there was cutaneous psoriasis. Usually (29 cases) onset was in the lower limbs: arthritis of the knee (14 cases), hip (9 cases), ankle (7 cases) or painful heel (4 cases). During the course (with a mean follow-up of 11.2 +/- 7 years), 35 patients exhibited peripheral joint diseases and 25 had axial involvement. Ocular involvement was present in 5 cases. 10 patients had a modification of respiratory function. Radiologic sacroiliitis was found in 31 patients but with a delay of 5.3 +/- 2.6 years. Vertebral radiologic lesions were only seen in 11 patients. Radiologic hip involvement was frequent (20 cases) with complete destruction in 6 patients. Erosion and ossification of the calcaneum were observed in 15 cases. The ESR was above 20 mm/first hour in 26 cases (72%). 81% of these patients were HLA B27 positive. Functional prognosis was good: 16 patients (51.6%) led an almost normal life, 6 were bedridden (Steinbrocker's grade IV), 3 had severe impairment (grade III) and 6 had slight impairment (grade II).(ABSTRACT TRUNCATED AT 250 WORDS)

Laryngeal dystonia gravidarum: sudden onset of adductor spasmodic dysphonia in pregnancy.

Science.gov (United States)

Ankola, Ashish; Sulica, Lucian; Murry, Thomas

2013-12-01

The purpose of this study was to identify the presence or absence of known factors related to onset of adductor spasmodic dysphonia (ADSD) in a population with sudden onset during or after pregnancy. Retrospective review. A review of 350 patient records identified five patients with sudden onset of ADSD related to pregnancy. An age-matched group with sudden onset of ADSD not related to pregnancy served as controls. All subjects completed a 20-question survey of risk factors relevant to ADSD. The average age of onset in both groups was 31 years. Three had onset of ADSD in the postpartum period, the other two during pregnancy. Significantly increased avocational voice use was found in the pregnant group compared to the control group. There was a significant difference in the two groups regarding cumulative risk factors traditionally associated with ADSD. Sudden onset of ADSD can occur in pregnancy in women with clinical profiles that differ from traditional ADSD patients. Copyright © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

Observations of the Ionospheric Response to a Weak Substorm Onset

Science.gov (United States)

Chartier, A.; Gjerloev, J. W.; Ohtani, S.; Nikoukar, R.; Forte, B.

2015-12-01

We present observations of substorm onset at Tromsø, Norway. This event was unusually well observed by ground magnetometers, incoherent scatter radar, satellites, an allsky camera and a scintillation monitor in the vicinity of the onset location. At onset, ground magnetometer observations indicate the formation of a westward electrojet above Tromsø and, at the same location, allsky camera images show an arc brightening and moving poleward. Satellite observations are consistent with an onset location at Tromsø, followed by a westward surge of dipolarization. Two features of the ionospheric response are observed by the incoherent scatter radar at Tromsø: 1) At onset, ion drift velocities reduce sharply from 100-400 m/s to roughly zero, consistent with a field-aligned potential drop shielding the ionosphere from magnetospheric convection. 2) There is a two-stage enhancement of the westward electrojet, with each stage directly preceded by an increase of ionization. Both these features are consistent with the theory that the inner magnetosphere acts neither as a current nor a voltage generator during substorm onset. Figure shows EISCAT observations of line-of-sight ion drifts, electron and ion temperatures. There is a transition from ExB drift, indicated by a decrease in ion velocity in panel (a), to electron precipitation indicated by increased electron temperatures in panel (b). Substorm onset occurs at the transition time, around 20:02:30 UT.

[Clinical characteristics and renal uric acid excretion in early-onset gout patients].

Science.gov (United States)

Li, Q H; Liang, J J; Chen, L X; Mo, Y Q; Wei, X N; Zheng, D H; Dai, L