WorldWideScience

Sample records for load prospectively determined

  1. Loads and loads and loads: The influence of prospective load, retrospective load, and ongoing task load in prospective memory

    Directory of Open Access Journals (Sweden)

    Beat eMeier

    2015-06-01

    Full Text Available In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load can affect prospective memory performance. The existence of multiple target events increases prospective load and adding complexity to the to-be-remembered action increases retrospective load. In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of prospective load on costs in the ongoing task for categorical targets (Experiment 2, but not for specific targets (Experiment 1. Retrospective load and ongoing task load both affected remembering the retrospective component of the prospective memory task. We suggest that prospective load can enhance costs in the ongoing task due to additional monitoring requirements. Retrospective load and ongoing task load seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

  2. Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory

    Science.gov (United States)

    Meier, Beat; Zimmermann, Thomas D.

    2015-01-01

    In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially. PMID:26082709

  3. Loads and loads and loads: the influence of prospective load, retrospective load, and ongoing task load in prospective memory.

    Science.gov (United States)

    Meier, Beat; Zimmermann, Thomas D

    2015-01-01

    In prospective memory tasks different kinds of load can occur. Adding a prospective memory task can impose a load on ongoing task performance. Adding ongoing task load (OTL) can affect prospective memory performance. The existence of multiple target events increases prospective load (PL) and adding complexity to the to-be-remembered action increases retrospective load (RL). In two experiments, we systematically examined the effects of these different types of load on prospective memory performance. Results showed an effect of PL on costs in the ongoing task for categorical targets (Experiment 2), but not for specific targets (Experiment 1). RL and OTL both affected remembering the retrospective component of the prospective memory task. We suggest that PL can enhance costs in the ongoing task due to additional monitoring requirements. RL and OTL seem to impact the division of resources between the ongoing task and retrieval of the retrospective component, which may affect disengagement from the ongoing task. In general, the results demonstrate that the different types of load affect prospective memory differentially.

  4. Energy conservation prospects through electric load management

    Energy Technology Data Exchange (ETDEWEB)

    El-Shirbeeny, E H.T.

    1984-04-01

    In this paper, concepts of electric load management are discussed for effective energy conservation. It is shown that the conservation program must be comprehensive to provide solutions to the problems facing the electric consumer, the electric utility and the society by reducing the rate of growth of energy consumption and power system peak demand requirements. The impact of energy management programs on electric energy conservation is examined, with emphasis on efficiency, storage, cogeneration and controls with computers.

  5. A simplified technique for shakedown load determination

    International Nuclear Information System (INIS)

    Abdalla, H.F.; Younan, M.Y.A.; Megahed, M.M.

    2005-01-01

    In this paper a simple technique is presented to determine the limit shakedown load of a structure or a component using the finite element method. Through the proposed technique, the limit shakedown load is determined without performing time consuming cyclic loading simulations or iterative elastic techniques. Instead, it is determined by performing only two analyses namely, an elastic analysis and an elastic-plastic analysis. By extracting the results of the two analyses, the limit shakedown load of the structure is determined through the calculation of the residual stresses. The technique is applied and verified using two bench mark shakedown problems namely: the two-bar structure subjected to constant axial force and cyclic thermal loading, and the Bree cylinder subjected to constant internal pressure and cyclic high heat fluxes across its wall. The results of the proposed technique showed very good correlation with the, analytically determined, Bree diagrams of both structures. Moreover, the outcomes of the proposed technique showed very good results in comparison to full cyclic loading elasto-plastic finite element simulations of both structures. (authors)

  6. Determination of the pipe stemming load

    International Nuclear Information System (INIS)

    Cowin, S.C.

    1979-01-01

    A mechanical model for the emplacement pipe system is developed. The model is then employed to determine the force applied to the surface collar of the emplacement pipe, the pipe-stemming load, and the stress along the emplacement pipe as a function of stemming height. These results are presented as integrals and a method for their numerical integration is given

  7. 49 CFR 237.71 - Determination of bridge load capacities.

    Science.gov (United States)

    2010-10-01

    ... capacity shall be determined. (g) Bridge load capacity may be expressed in terms of numerical values related to a standard system of bridge loads, but shall in any case be stated in terms of weight and...) Bridge load capacity may be expressed in terms of both normal and maximum load conditions. Operation of...

  8. Prospective memory in schizophrenia: The impact of varying retrospective-memory load

    NARCIS (Netherlands)

    Altgassen, A.M.; Kliegel, M.; Rendell, P.G.; Henry, J.D.; Zöllig, J.

    2008-01-01

    The present study investigated event-based prospective memory in individuals with schizophrenia (nn=n23) and healthy controls (nn=n23). The retrospective-memory load was varied to disentangle the relative contributions of the retrospective and prospective components on prospective-memory

  9. Load management in electrical networks. Objectives, methods, prospects

    International Nuclear Information System (INIS)

    Gabioud, D.

    2008-01-01

    This illustrated article takes up the problems related to the variation of the load in electricity networks. How to handle the peak load? Different solutions in the energy demand management are discussed. Method based on the price, method based on the reduction of the load by electric utilities. Information systems are presented which gives the consumer the needed data to participate in the local load management.

  10. Determining large deflections in rectangular combined loaded ...

    Indian Academy of Sciences (India)

    (Bisshopp & Drucker 1945; Scott et al 1955; Lau 1982; Rao & Rao 1986; Baker 1993; Lee et al 1993; Frisch-Fay 1962; Fertis 1999). Prathap and Varadan (1976) had calculated large deflections in cantilever beams made of non-linear Ramberg–Osgood type material on which concentrated load effected on the free end.

  11. Cognitive load and task condition in event- and time-based prospective memory: an experimental investigation.

    Science.gov (United States)

    Khan, Azizuddin; Sharma, Narendra K; Dixit, Shikha

    2008-09-01

    Prospective memory is memory for the realization of delayed intention. Researchers distinguish 2 kinds of prospective memory: event- and time-based (G. O. Einstein & M. A. McDaniel, 1990). Taking that distinction into account, the present authors explored participants' comparative performance under event- and time-based tasks. In an experimental study of 80 participants, the authors investigated the roles of cognitive load and task condition in prospective memory. Cognitive load (low vs. high) and task condition (event- vs. time-based task) were the independent variables. Accuracy in prospective memory was the dependent variable. Results showed significant differential effects under event- and time-based tasks. However, the effect of cognitive load was more detrimental in time-based prospective memory. Results also revealed that time monitoring is critical in successful performance of time estimation and so in time-based prospective memory. Similarly, participants' better performance on the event-based prospective memory task showed that they acted on the basis of environment cues. Event-based prospective memory was environmentally cued; time-based prospective memory required self-initiation.

  12. Determination of the boundary conditions of the grinding load in ball mills

    Science.gov (United States)

    Sharapov, Rashid R.

    2018-02-01

    The prospects of application in ball mills for grinding cement clinker with inclined partitions are shown. It is noted that ball mills with inclined partitions are more effective. An algorithm is proposed for calculating the power consumed by a ball mill with inclined inter-chamber partitions in which an axial movement of the ball load takes place. The boundary conditions in which the ball load is located are determined. The equations of bounding the grinding load are determined. The behavior of a grinding load is considered in view of the characteristic cross sections. The coordinates of the centers of gravity of the grinding load with a definite step and the shape of the cross sections are determined. It is theoretically shown that grinding load in some parts of the ball mill not only consumes, but also helps to rotate the ball mill. Methods for calculating complex analytical expressions for determining the coordinates of the centers of gravity of the grinding load under the conditions of its longitudinal motion have developed. The carried out researches allow to approach from the general positions to research of behavior of a grinding load in the ball mills equipped with various in-mill devices.

  13. A simplified technique for shakedown limit load determination

    International Nuclear Information System (INIS)

    Abdalla, Hany F.; Megahed, Mohammad M.; Younan, Maher Y.A.

    2007-01-01

    In this paper, a simplified technique is presented to determine the shakedown limit load of a structure using the finite element method. The simplified technique determines the shakedown limit load without performing lengthy time consuming full elastic-plastic cyclic loading simulations or conventional iterative elastic techniques. Instead, the shakedown limit load is determined by performing two analyses namely: an elastic analysis and an elastic-plastic analysis. By extracting the results of the two analyses, the shakedown limit load is determined through the calculation of the residual stresses developed within the structure. The simplified technique is applied and verified using two bench mark shakedown problems namely: the two-bar structure subjected to constant axial force and cyclic thermal loading, and the Bree cylinder subjected to constant internal pressure and cyclic high temperature variation across its wall. The results of the simplified technique showed very good correlation with the, analytically determined, Bree diagrams of both structures. In order to gain confidence in the simplified technique, the shakedown limit loads output by the simplified technique are used to perform full elastic-plastic cyclic loading simulations to check for shakedown behavior of both structures

  14. Determining craneways deformations caused by static loads

    Directory of Open Access Journals (Sweden)

    Simonyan Vladimir Viktorovich

    2015-04-01

    Full Text Available The most typical types of crane substructures destruction are wear of crane rails, details of its fixation, deformation of crane beams, settlement or tilting of the columns. At technical examination of buildings and structures with crane rails their planned-high-altitude position is determined. There exist a list of methods for determining the crane rails’ planned-high-altitude position, each of them has its disadvantage, expressed in the final result - the real position of crane rails. While estimating their position from the ground, i.e. mounting transit on the ground, and indicating devices above, there is an inaccuracy on the rails, which is caused by different moments of indications fixation, both on the plan and hightwise. The authors carried out observations of the position of craneways both on the plan and heightwise for determining the reason of craneways bearing structures’ deformations and the period of their influence of railtrack state. The results of these observations are analyzed and presented. The authors present their suggestions on advancing the crane operation, which will increase its operation life.

  15. Radiation load in determining bone age

    International Nuclear Information System (INIS)

    Totsev, N.; Gylybova, V.

    1991-01-01

    The determination of the bone age in children is based on X-ray of the left wrist. By means of the dosimetric device 'Robotron 2300' it is shown that the average surface dose for single X-ray is about 49.10 5 Gy. The execution of single X-ray is well-grounded and the conditions for it are specified: blending of the object and shielding of the gonads and the whole body with a lead rubber as well as immobilizing of the hand with a specially made appliance. The risk of radiation injury during the study is practically negligible. Having in mind the significance of the problems which could be solved using the results of such a study, the benefit/harm relationship is in favour of broader use of the method. 12 refs., 1tab. described

  16. Determination of brace forces caused by construction loads and wind loads during bridge construction.

    Science.gov (United States)

    2014-04-01

    The first objective of this study was to develop procedures for determining bracing forces during bridge construction. : Numerical finite element models and analysis techniques were developed for evaluating brace forces induced by construction loads ...

  17. Atmospheric pressure loading effects on Global Positioning System coordinate determinations

    Science.gov (United States)

    Vandam, Tonie M.; Blewitt, Geoffrey; Heflin, Michael B.

    1994-01-01

    Earth deformation signals caused by atmospheric pressure loading are detected in vertical position estimates at Global Positioning System (GPS) stations. Surface displacements due to changes in atmospheric pressure account for up to 24% of the total variance in the GPS height estimates. The detected loading signals are larger at higher latitudes where pressure variations are greatest; the largest effect is observed at Fairbanks, Alaska (latitude 65 deg), with a signal root mean square (RMS) of 5 mm. Out of 19 continuously operating GPS sites (with a mean of 281 daily solutions per site), 18 show a positive correlation between the GPS vertical estimates and the modeled loading displacements. Accounting for loading reduces the variance of the vertical station positions on 12 of the 19 sites investigated. Removing the modeled pressure loading from GPS determinations of baseline length for baselines longer than 6000 km reduces the variance on 73 of the 117 baselines investigated. The slight increase in variance for some of the sites and baselines is consistent with expected statistical fluctuations. The results from most stations are consistent with approximately 65% of the modeled pressure load being found in the GPS vertical position measurements. Removing an annual signal from both the measured heights and the modeled load time series leaves this value unchanged. The source of the remaining discrepancy between the modeled and observed loading signal may be the result of (1) anisotropic effects in the Earth's loading response, (2) errors in GPS estimates of tropospheric delay, (3) errors in the surface pressure data, or (4) annual signals in the time series of loading and station heights. In addition, we find that using site dependent coefficients, determined by fitting local pressure to the modeled radial displacements, reduces the variance of the measured station heights as well as or better than using the global convolution sum.

  18. Determination of aggregated load power consumption, under non-sinusoidal supply using an improved load model

    International Nuclear Information System (INIS)

    Bagheri, R.; Moghani, J.S.; Gharehpetian, G.B.; Mirtalaei, S.M.M.

    2009-01-01

    The harmonic content of supply voltage results in additional power losses and hence increases the load power consumption. The role of the power quality equipments on the power consumption without using an accurate model cannot be determined, too. In this paper, an improved model for aggregated loads proposed, which estimates the effects of voltage harmonics on the power consumption. The distinguished aspect of the proposed model is its parameters identification method which is based on the practical techniques, such as employing a capacitor bank or varying dummy loads in steps. The proposed model has been verified by the comparison of measured and simulated results.

  19. Training Load, Immune Status, and Clinical Outcomes in Young Athletes: A Controlled, Prospective, Longitudinal Study

    Science.gov (United States)

    Blume, Katharina; Körber, Nina; Hoffmann, Dieter; Wolfarth, Bernd

    2018-01-01

    Introduction: Beside positive effects on athlete's health, competitive sport can be linked with an increased risk of illness and injury. Because of high relative increases in training, additional physical and psychological strains, and an earlier specialization and professionalization, adolescent athletes needs an increased attention. Training can alter the immune system by inducing a temporary immunosuppression, finally developing infection symptoms. Previous studies identified Epstein Barr Virus (EBV) as potential indicator for the immune status. In addition to the identification of triggering risk factors for recurrent infections, the aim was to determine the interaction between training load, stress sense, immunological parameters, and clinical symptoms. Methods: A controlled, prospective, longitudinal study on young athletes (n = 274, mean age: 13.8 ± 1.5 yrs) was conducted between 2010 and 2014. Also 285 controls (students, who did not perform competitive sports, mean age: 14.5 ± 1.9 yrs) were recruited. Athletes were examined 3 times each year to determine the effects of stress factors (training load: training hours per week [Th/w]) on selected outcome parameters (clinical [susceptibility to infection, WURSS-21: 21-item Wisconsin Upper Respiratory Symptom Survey], immunological, psychological end points). As part of each visit, EBV serostatus and EBV-specific IgG tiers were studied longitudinally as potential immune markers. Results: Athletes (A) trained 14.9 ± 5.6 h weekly. Controls (C) showed no lower stress levels compared to athletes (p = 0.387). Twelve percent of athletes reported recurrent infections (C: 8.5%, p = 0.153), the presence of an upper respiratory tract infection (URTI) was achieved in 30.7%. EBV seroprevalence of athletes was 60.3% (C: 56.6%, p = 0.339). Mean EBV-specific IgG titer of athletes was 166 ± 115 U/ml (C: 137 ± 112 U/ml, p = 0.030). With increasing Th/w, higher stress levels were observed (p athletes showed no increased

  20. Determining friction and effective loading for sled sprinting.

    Science.gov (United States)

    Cross, Matt R; Tinwala, Farhan; Lenetsky, Seth; Samozino, Pierre; Brughelli, Matt; Morin, Jean-Benoit

    2017-11-01

    Understanding the impact of friction in sled sprinting allows the quantification of kinetic outputs and the effective loading experienced by the athlete. This study assessed changes in the coefficient of friction (µ k ) of a sled sprint-training device with changing mass and speed to provide a means of quantifying effective loading for athletes. A common sled equipped with a load cell was towed across an athletics track using a motorised winch under variable sled mass (33.1-99.6 kg) with constant speeds (0.1 and 0.3 m · s -1 ), and with constant sled mass (55.6 kg) and varying speeds (0.1-6.0 m · s -1 ). Mean force data were analysed, with five trials performed for each condition to assess the reliability of measures. Variables were determined as reliable (ICC > 0.99, CV friction-force and speed/coefficient of friction relationships well fitted with linear (R 2  = 0.994-0.995) and quadratic regressions (R 2  = 0.999), respectively (P friction values determined at two speeds, and the range in values from the quadratic fit (µ k  = 0.35-0.47) suggested µ k and effective loading were dependent on instantaneous speed on athletics track surfaces. This research provides a proof-of-concept for the assessment of friction characteristics during sled towing, with a practical example of its application in determining effective loading and sled-sprinting kinetics. The results clarify effects of friction during sled sprinting and improve the accuracy of loading applications in practice and transparency of reporting in research.

  1. Training Load, Immune Status, and Clinical Outcomes in Young Athletes: A Controlled, Prospective, Longitudinal Study

    Directory of Open Access Journals (Sweden)

    Katharina Blume

    2018-03-01

    Full Text Available Introduction: Beside positive effects on athlete's health, competitive sport can be linked with an increased risk of illness and injury. Because of high relative increases in training, additional physical and psychological strains, and an earlier specialization and professionalization, adolescent athletes needs an increased attention. Training can alter the immune system by inducing a temporary immunosuppression, finally developing infection symptoms. Previous studies identified Epstein Barr Virus (EBV as potential indicator for the immune status. In addition to the identification of triggering risk factors for recurrent infections, the aim was to determine the interaction between training load, stress sense, immunological parameters, and clinical symptoms.Methods: A controlled, prospective, longitudinal study on young athletes (n = 274, mean age: 13.8 ± 1.5 yrs was conducted between 2010 and 2014. Also 285 controls (students, who did not perform competitive sports, mean age: 14.5 ± 1.9 yrs were recruited. Athletes were examined 3 times each year to determine the effects of stress factors (training load: training hours per week [Th/w] on selected outcome parameters (clinical [susceptibility to infection, WURSS-21: 21-item Wisconsin Upper Respiratory Symptom Survey], immunological, psychological end points. As part of each visit, EBV serostatus and EBV-specific IgG tiers were studied longitudinally as potential immune markers.Results: Athletes (A trained 14.9 ± 5.6 h weekly. Controls (C showed no lower stress levels compared to athletes (p = 0.387. Twelve percent of athletes reported recurrent infections (C: 8.5%, p = 0.153, the presence of an upper respiratory tract infection (URTI was achieved in 30.7%. EBV seroprevalence of athletes was 60.3% (C: 56.6%, p = 0.339. Mean EBV-specific IgG titer of athletes was 166 ± 115 U/ml (C: 137 ± 112 U/ml, p = 0.030. With increasing Th/w, higher stress levels were observed (p < 0.001. Analyzes of WURSS

  2. High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: Results of a prospective cohort study

    NARCIS (Netherlands)

    Hoogendoorn, W.E.; Bongers, P.M.; Vet, H.C.W. de; Ariëns, G.A.M.; Mechelen, W. van; Bouter, L.M.

    2002-01-01

    Objective: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. Methods: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

  3. High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: results of a prospective cohort study

    NARCIS (Netherlands)

    Hoogendoorn, W.E.; Bongers, P.M.; de Vet, H.C.W.; Ariens, G.A.M.; van Mechelen, W.; Bouter, L.M.

    2002-01-01

    Objective: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. Methods: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

  4. High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain : results of a prospective cohort study

    NARCIS (Netherlands)

    Hoogendoorn, W E; Bongers, P M; de Vet, H C W; Ariëns, G A M; van Mechelen, W; Bouter, L M

    OBJECTIVE: To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. METHODS: The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for

  5. Immediate loading versus immediate provisionalization of maxillary single-tooth replacements: a prospective randomized study with BioComp implants

    NARCIS (Netherlands)

    Lindeboom, Jerome A.; Frenken, Joost W.; Dubois, Leander; Frank, Michael; Abbink, Ingmar; Kroon, Frans H.

    2006-01-01

    PURPOSE: The aim of this prospective randomized study was to evaluate the clinical outcome of immediately loaded solid plasma sprayed (TPS) BioComp (BioComp Industries BV, Vught, The Netherlands) implants versus immediate provisionalized but non-loaded BioComp implants in the anterior and premolar

  6. A knowledge based method for nuclear plant loading pattern determination

    International Nuclear Information System (INIS)

    Dauboin, P.

    1990-01-01

    This paper deals with the design of a knowledge based system for solving an industrial problem which occurs in nuclear fuel management. The problem lies in determining satisfactory loading patterns for nuclear plants. Its primary feature consists in the huge search space involved. Conventional resolution processes are formally defined and analyzed: there is no general algorithm which guarantees to always provide a reasonable solution in each situation. We propose a new approach to solve this constrained search problem using domain-specific knowledge and general constraint-based heuristics. During a preprocessing step, a problem dependent search algorithm is designed. This procedure is then automatically implemented in FORTRAN. The generated routines have proved to be very efficient finding solutions which could not have been provided using logic programming. A prototype expert system has already been applied to actual reload pattern searches. While combining efficiency and flexibility, this knowledge based system enables human experts to rapidly match new constraints and requirements

  7. Prospective memory in young and older adults: the effects of task importance and ongoing task load.

    Science.gov (United States)

    Smith, Rebekah E; Hunt, R Reed

    2014-01-01

    Remembering to perform an action in the future, called prospective memory, often shows age-related differences in favor of young adults when tested in the laboratory. Recently Smith, Horn, and Bayen (2012; Aging, Neuropsychology, and Cognition, 19, 495) embedded a PM task in an ongoing color-matching task and manipulated the difficulty of the ongoing task by varying the number of colors on each trial of the task. Smith et al. found that age-related differences in PM performance (lower PM performance for older adults relative to young adults) persisted even when older adults could perform the ongoing task as well or better than the young adults. The current study investigates a possible explanation for the pattern of results reported by Smith et al. by including a manipulation of task emphasis: for half of the participants the prospective memory task was emphasize, while for the other half the ongoing color-matching task was emphasized. Older adults performed a 4-color version of the ongoing color-matching task, while young adults completed either the 4-color or a more difficult 6-color version of the ongoing task. Older adults failed to perform as well as the young adults on the prospective memory task regardless of task emphasis, even when older adults were performing as well or better than the young adults on the ongoing color-matching task. The current results indicate that the lack of an effect of ongoing task load on prospective memory task performance is not due to a perception that one or the other task is more important than the other.

  8. Determination of current loads of floating platform for special purposes

    Science.gov (United States)

    Ma, Guang-ying; Yao, Yun-long; Zhao, Chen-yao

    2017-08-01

    This article studied a new floating offshore platform for special purposes, which was assembled by standard floating modules. The environmental load calculation of the platform is an important part of the research of the ocean platform, which has always been paid attention to by engineers. In addition to wave loads, the wind loads and current loads are also important environmental factors that affect the dynamic response of the offshore platform. The current loads on the bottom structure should not be ignored. By Fluent software, the hydrostatic conditions and external current loads of the platform were calculated in this paper. The coefficient which is independent of the current velocity, namely, current force coefficient, can be fitted through current loads, which can be used for the consequent hydrodynamic and mooring analyses.

  9. An experiment for determining the Euler load by direct computation

    Science.gov (United States)

    Thurston, Gaylen A.; Stein, Peter A.

    1986-01-01

    A direct algorithm is presented for computing the Euler load of a column from experimental data. The method is based on exact inextensional theory for imperfect columns, which predicts two distinct deflected shapes at loads near the Euler load. The bending stiffness of the column appears in the expression for the Euler load along with the column length, therefore the experimental data allows a direct computation of bending stiffness. Experiments on graphite-epoxy columns of rectangular cross-section are reported in the paper. The bending stiffness of each composite column computed from experiment is compared with predictions from laminated plate theory.

  10. Determination of multiple solutions of load flow equations

    Indian Academy of Sciences (India)

    This paper is concerned with the problem of finding all the real solutions (all components of the solution vector must be real values) of load flow equations. Solutions in which some of the components are complex values are of no interest as they have no physical significance as a load flow solution. This problem issignificant ...

  11. Immediate loading implants with mandibular overdenture: a 48-month prospective follow-up study

    Directory of Open Access Journals (Sweden)

    Karla ZANCOPE

    2014-08-01

    Full Text Available The aim of this prospective clinical study was to evaluate patient rehabilitation with two immediately loaded implants and bar-retained mandibular overdentures after 48 months of follow-up. Twenty patients were treated with two implants each; of these, 17 patients were re-evaluated for comparison. Gender, age, plaque index, gingival inflammation, keratinized mucosa, probing depth, bleeding, and implant loss data were recorded, and periapical radiographs were obtained for measurement of marginal bone loss. The results were statistically analyzed with one-way analysis of variance (ANOVA followed by Student’s t-test and Pearson’s correlation test. To compare the data at baseline and after 48 months, a Wilcoxon Signed Rank Test was performed (α = 0.05. One implant failed (2.9% during the first year and was replaced. A total of 35 implants were evaluated. Bone loss values were 0.52–2.89 mm (mean, 1.46 mm. Probing depth was 1.75–3.75 mm (mean, 2.22 mm. Correlations were found between bone loss and plaque index and between bone loss and gender, but bone loss did not correlate with gingival inflammation, keratinized mucosa, probing depth, or age. The overall survival rate of the implants was 97.1%. Based on these results, the use of two immediately loaded splinted interforaminal implants to retain an overdenture with a bar attachment is a clinically viable option with a high survival rate.

  12. Early loading of plalatal implants (ortho-type II a prospective multicenter randomized controlled clinical trial

    Directory of Open Access Journals (Sweden)

    Gedrange Tomasz

    2007-09-01

    Full Text Available Abstract Background In orthodontic treatment, anchorage control is a fundamental aspect. Usually conventional mechanism for orthodontic anchorage control can be either extraoral or intraoral that is headgear or intermaxillary elastics. Their use are combined with various side effects such as tipping of occlusal plane or undesirable movements of teeth. Especially in cases, where key-teeth are missing, conventional anchorage defined as tooth-borne anchorage will meet limitations. Therefore, the use of endosseous implants for anchorage purposes are increasingly used to achieve positional stability and maximum anchorage. Methods/Design The intended study is designed as a prospective, multicenter randomized controlled trial (RCT, comparing and contrasting the effect of early loading of palatal implant therapy versus implant loading after 12 weeks post implantation using the new ortho-implant type II anchor system device (Orthosystem Straumann, Basel, Switzerland. 124 participants, mainly adult males or females, whose diagnoses require temporary stationary implant-based anchorage treatment will be randomized 1:1 to one of two treatment groups: group 1 will receive a loading of implant standard therapy after a healing period of 12 week (gold standard, whereas group 2 will receive an early loading of orthodontic implants within 1 week after implant insertion. Participants will be at least followed for 12 months after implant placement. The primary endpoint is to investigate the behavior of early loaded palatal implants in order to find out if shorter healing periods might be justified to accelerate active orthodontic treatment. Secondary outcomes will focus e.g. on achievement of orthodontic treatment goals and quantity of direct implant-bone interface of removed bone specimens. As tertiary objective, a histologic and microtomography evaluation of all retrieved implants will be performed to obtain data on the performance of the SLA surface in human bone

  13. PIV-based load determination in aircraft propellers

    OpenAIRE

    Ragni, D.

    2012-01-01

    The thesis describes the application of particle image velocimetry (PIV) to study the aerodynamic loads of airfoils and aircraft propellers. The experimental work focuses on the development of a measurement procedure to infer the pressure of the flow field from the velocity distribution obtained by PIV velocimetry. The technique offers important advantages in aircraft propellers, since the loads can be locally inspected without the need to install pressure sensors and momentum balances in rot...

  14. PIV-based load determination in aircraft propellers

    NARCIS (Netherlands)

    Ragni, D.

    2012-01-01

    The thesis describes the application of particle image velocimetry (PIV) to study the aerodynamic loads of airfoils and aircraft propellers. The experimental work focuses on the development of a measurement procedure to infer the pressure of the flow field from the velocity distribution obtained by

  15. determination of stresses caused by infinitely long line loads on ...

    African Journals Online (AJOL)

    user

    2016-10-04

    Oct 4, 2016 ... long line loads on semi-infinite homogeneous elastic soils. Airy's stress functions of the Cartesian coordinates system were used to express the governing equations of plane strain elasticity for a semi-infinite homogeneous soil as a biharmonic problem. The fourth order partial differential equation was then ...

  16. Bed load determination in Parana river by radioactive tracer technique

    International Nuclear Information System (INIS)

    Aoki, P.E.; Enokihara, C.T.; Rocca, H.C.C.; Bittencourt, A.V.L.

    1988-10-01

    Radioactive tracing technique with marked sand was employed to evaluate the bottom sediment drag of Parana river, near the future site for the ''Ilha Grande'' Dam in Guaira City (State of Parana). 198 Au radioisotope was employed and measurements had been performed for a period of fifteen days. A bed load rate of 952,3 t/day was obtained for a laminar layer of 0,33 m mean thickness and 1.65 m/day mean velocity. (author) [pt

  17. Social determinants of tuberculosis in Europe: a prospective ecological study.

    Science.gov (United States)

    Ploubidis, George B; Palmer, Melissa J; Blackmore, Charlotte; Lim, Tek-Ang; Manissero, Davide; Sandgren, Andreas; Semenza, Jan C

    2012-10-01

    Tuberculosis (TB) is considered to be a disease of poverty, since its incidence is exacerbated by socioeconomic factors, inconsistent or partial treatment practices, and immigration from endemic countries. A prospective country level study, using a comprehensive dataset of TB incidence and prevalence taken from countries within the World Health Organization (WHO) European region, was conducted. We employed quintile regression to investigate the prospective association between baseline (measured in 2000) and a nation's wealth, level of egalitarianism, migration rate, health-related lifestyle and social capital with TB incidence and prevalence over a 10-yr period (2000-2009). We found that ∼50% of TB variation is accounted for by a nation's wealth and level of egalitarianism. We observed a negative prospective association between logged gross domestic product and TB rates, and a positive prospective association between income inequality and TB. National income levels per capita and income inequality are important predictors for TB incidence and prevalence in the WHO European region. They account for 50% of country-level variation, indicating the importance of a combined absolute and relative socioeconomic disadvantage in the development of TB. These findings also provide a tool for forecasting potential fluctuations in the level of TB epidemics in the WHO European region, with respect to socioeconomic changes.

  18. Work stress, caregiving, and allostatic load: prospective results from the Whitehall II cohort study.

    Science.gov (United States)

    Dich, Nadya; Lange, Theis; Head, Jenny; Rod, Naja Hulvej

    2015-06-01

    Studies investigating health effects of work and family stress usually consider these factors in isolation. The present study investigated prospective interactive effects of job strain and informal caregiving on allostatic load (AL), a multisystem indicator of physiological dysregulation. Participants were 7007 British civil servants from the Whitehall II cohort study. Phase 3 (1991-1994) served as the baseline, and Phases 5 (1997-1999) and 7 (2002-2004) served as follow-ups. Job strain (high job demands combined with low control) and caregiving (providing care to aged or disabled relatives) were assessed at baseline. AL index (possible range, 0-9) was assessed at baseline and both follow-ups based on nine cardiovascular, metabolic, and immune biomarkers. Linear mixed-effect models were used to examine the association of job strain and caregiving with AL. High caregiving burden (above the sample median weekly hours of providing care) predicted higher AL levels, with the effect strongest in those also reporting job strain (b = 0.36, 95% confidence interval = 0.01-0.71); however, the interaction between job strain and caregiving was not significant (p = .56). Regardless of job strain, participants with low caregiving burden (below sample median) had lower subsequent AL levels than did non-caregivers (b = -0.22, 95% confidence interval = -0.06--0.37). The study provides some evidence for adverse effects of stress at work combined with family demands on physiological functioning. However, providing care to others may also have health protective effects if it does not involve excessive time commitment.

  19. Determination of road dust loadings and chemical characteristics using resuspension.

    Science.gov (United States)

    Chen, Jianhua; Wang, Wei; Liu, Hongjie; Ren, Lihong

    2012-03-01

    The contribution of fugitive dust from traffic to air pollution can no longer be ignored in China. In order to obtain the road dust loadings and to understand the chemical characteristics of PM(10) and PM(2.5) from typical road dust, different paved roads in eight districts of Beijing were selected for dust collection during the four seasons of 2005. Ninety-eight samples from 28 roads were obtained. The samples were resuspended using equipment assembled to simulate the rising process of road dust caused by the wind or wheels in order to obtain the PM(10) and PM(2.5) filter samples. The average road dust loading was 3.82 g m(-2), with the highest of 24.22 g m(-2) being in Hutongs in the rural-urban continuum during winter. The road dust loadings on higher-grade roads were lower than those on lower-grade roads. Attention should be paid to the pollution in the rural-urban continuum areas. The sums of element abundances measured were 16.17% and 18.50% for PM(10) and PM(2.5) in road dust. The average abundances of OC and EC in PM(10) and PM(2.5) in road dust were 11.52%, 2.01% and 12.50%, 2.06%, respectively. The abundance of elements, water-soluble ions, and OC, EC in PM(10) and PM(2.5) resuspended from road dust did not change greatly with seasons and road types. The soil dust, construction dust, dust emitted from burning coal, vehicle exhaust, and deposition of particles in the air were the main sources of road dust in Beijing. Affected by the application of snow-melting agents in Beijing during winter, the amount of Cl( - ) and Na( + ) was much higher during that time than in the other seasons. This will have a certain influence on roads, bridges, vegetations, and groundwater.

  20. Prospective memory in dynamic environments: effects of load, delay, and phonological rehearsal

    Science.gov (United States)

    Stone, M.; Dismukes, K.; Remington, R.

    2001-01-01

    A new paradigm was developed to examine prospective memory performance in a visual-spatial task that resembles some aspects of the work of air traffic controllers. Two experiments examined the role of workload (number of aeroplanes that participants directed), delay (between receipt of prospective instructions and execution), and phonological rehearsal. High workload increased prospective memory errors but increasing delay from 1-3 or 5 minutes had no effect. Shadowing aurally presented text reduced prospective memory performance, presumably because it prevented verbal rehearsal of the prospective instructions. However, performance on the foreground task of directing aeroplanes to routine destinations was affected only by workload and not by opportunity for rehearsal. Our results suggest that ability to maintain performance on a routine foreground task while performing a secondary task--perhaps analogous to conversation--does not predict ability to retrieve a prospective intention to deviate from the routine.

  1. Determination of the critical plane and durability estimation for a multiaxial cyclic loading

    Science.gov (United States)

    Burago, N. G.; Nikitin, A. D.; Nikitin, I. S.; Yakushev, V. L.

    2018-03-01

    An analytical procedure is proposed to determine the critical plane orientation according to the Findley criterion for the multiaxial cyclic loading. The cases of in-phase and anti-phase cyclic loading are considered. Calculations of the stress state are carried out for the system of the gas turbine engine compressor disk and blades for flight loading cycles. The formulas obtained are used for estimations of the fatigue durability of this essential element of structure.

  2. 40 CFR 86.1772-99 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 19 2010-07-01 2010-07-01 false Road load power, test weight, and inertia weight class determination. 86.1772-99 Section 86.1772-99 Protection of Environment ENVIRONMENTAL... for Light-Duty Vehicles and Light-Duty Trucks § 86.1772-99 Road load power, test weight, and inertia...

  3. 40 CFR 86.529-98 - Road load force and inertia weight determination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load force and inertia weight... inertia weight determination. (a)(1) Road load as a function of speed is given by the following equation: F = A + CV2 (2) The values for coefficients A and C and the test inertia are given in Figure F98-9...

  4. Using Maximal Isometric Force to Determine the Optimal Load for Measuring Dynamic Muscle Power

    Science.gov (United States)

    Spiering, Barry A.; Lee, Stuart M. C.; Mulavara, Ajitkumar P.; Bentley, Jason R.; Nash, Roxanne E.; Sinka, Joseph; Bloomberg, Jacob J.

    2009-01-01

    Maximal power output occurs when subjects perform ballistic exercises using loads of 30-50% of one-repetition maximum (1-RM). However, performing 1-RM testing prior to power measurement requires considerable time, especially when testing involves multiple exercises. Maximal isometric force (MIF), which requires substantially less time to measure than 1-RM, might be an acceptable alternative for determining the optimal load for power testing. PURPOSE: To determine the optimal load based on MIF for maximizing dynamic power output during leg press and bench press exercises. METHODS: Twenty healthy volunteers (12 men and 8 women; mean +/- SD age: 31+/-6 y; body mass: 72 +/- 15 kg) performed isometric leg press and bench press movements, during which MIF was measured using force plates. Subsequently, subjects performed ballistic leg press and bench press exercises using loads corresponding to 20%, 30%, 40%, 50%, and 60% of MIF presented in randomized order. Maximal instantaneous power was calculated during the ballistic exercise tests using force plates and position transducers. Repeated-measures ANOVA and Fisher LSD post hoc tests were used to determine the load(s) that elicited maximal power output. RESULTS: For the leg press power test, six subjects were unable to be tested at 20% and 30% MIF because these loads were less than the lightest possible load (i.e., the weight of the unloaded leg press sled assembly [31.4 kg]). For the bench press power test, five subjects were unable to be tested at 20% MIF because these loads were less than the weight of the unloaded aluminum bar (i.e., 11.4 kg). Therefore, these loads were excluded from analysis. A trend (p = 0.07) for a main effect of load existed for the leg press exercise, indicating that the 40% MIF load tended to elicit greater power output than the 60% MIF load (effect size = 0.38). A significant (p . 0.05) main effect of load existed for the bench press exercise; post hoc analysis indicated that the effect of

  5. Experimental creep behaviour determination of cladding tube materials under multi-axial loadings

    International Nuclear Information System (INIS)

    Grosjean, Catherine; Poquillon, Dominique; Salabura, Jean-Claude; Cloue, Jean-Marc

    2009-01-01

    Cladding tubes are structural parts of nuclear plants, submitted to complex thermomechanical loadings. Thus, it is necessary to know and predict their behaviour to preserve their integrity and to enhance their lifetime. Therefore, a new experimental device has been developed to control the load path under multi-axial load conditions. The apparatus is designed to determine the thermomechanical behaviour of zirconium alloys used for cladding tubes. First results are presented. Creep tests with different biaxial loadings were performed. Results are analysed in terms of thermal expansion and of creep strain. The anisotropy of the material is revealed and iso-creep strain curves are given.

  6. Immediate functional loading of provisional implants in the reconstructed atrophic maxilla: preliminary results of a prospective study after 6 months of loading with a provisional bridge.

    Science.gov (United States)

    Lenssen, O; Barbier, L; De Clercq, C

    2011-09-01

    Implant-prosthetic rehabilitation of atrophic maxillae remains a challenging problem. The aim of this paper is to describe a novel treatment for functional rehabilitation of the atrophic maxilla and to discuss preliminary results of this treatment protocol. A prospective pilot study was carried out in 10 patients who underwent bony reconstruction of atrophic maxillae under general anaesthesia, with autologous calvarial bone grafts and simultaneous placement of six provisional implants. The provisional implants were loaded with a provisional acrylic bridge 1 day after surgery. After 6 months, the provisional implants were removed and final implants were placed under local anaesthesia, again in an immediate loading concept with a provisional bridge, followed by a final bridge after another 6 months of healing. The bone grafts integrated well in all 10 patients without infectious complications. The prosthetic survival of the provisional bridge at the time of placing the implants was 100%. All final implants could be placed and immediately loaded with a second provisional bridge. Patient satisfaction was high due to limited postoperative inconvenience and immediate fixed prosthetic rehabilitation. The preliminary results of this pilot study demonstrate that this treatment protocol is a well tolerated treatment for patients with maxillary atrophy desiring dental rehabilitation. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  7. Determination of radiation loads from examination of the colon by 67Ga citrate

    International Nuclear Information System (INIS)

    Mihalova, P.; Buncova, M.; Vrba, T.

    2011-01-01

    This paper deals with the determination of radiation loads from examination of the colon by gallium citrate. The average calculated committed effective dose after administration of 5 MBq of 67 Ga-citrate is 2.05 mSv.

  8. Early Loading of Single-Piece Implant for Partially Edentulous Posterior Arch: A Prospective One-Year Case Report

    Directory of Open Access Journals (Sweden)

    Amol Beldar

    2013-01-01

    Full Text Available Implant therapy is now well established, and there is an increasing need for shorter rehabilitation time. Original prerequisites of osseointegration have been reassessed to satisfy continuously increasing patient's expectation of reduced treatment time, improved esthetics, and increased comfort. Shorter healing time may be appropriate in some circumstances, and examples of early loading have been reported in animal and human studies. However, to date there are insufficient data to determine a universally acceptable opinion on early loading of implants for single-tooth replacement. This case report involves early loading, combined with construction of a restoration, inserted directly after 6 weeks of implant surgery and followup of one year.

  9. Virological and immunological profiles among patients with undetectable viral load followed prospectively for 24 months

    DEFF Research Database (Denmark)

    Katzenstein, T.; Ullum, H.; Røge, B.T.

    2003-01-01

    OBJECTIVE: To quantify HIV-RNA in plasma, in lymphoid tissue and proviral DNA in peripheral blood mononuclear cells and to relate these to immunological markers among patients with plasma viral load counts of

  10. Geometry and Topology Optimization of Statically Determinate Beams under Fixed and Most Unfavorably Distributed Load

    Directory of Open Access Journals (Sweden)

    Agata Kozikowska

    Full Text Available Abstract The paper concerns topology and geometry optimization of statically determinate beams with an arbitrary number of pin supports. The beams are simultaneously exposed to uniform dead load and arbitrarily distributed live load and optimized for the absolute maximum bending moment. First, all the beams with fixed topology are subjected to geometrical optimization by genetic algorithm. Strict mathematical formulas for calculation of optimal geometrical parameters are found for all topologies and any ratio of dead to live load. Then beams with the same minimal values of the objective function and different topologies are classified into groups called topological classes. The detailed characteristics of these classes are described.

  11. Nondestructive determination of the load bearing capacity of rigid pavement structures. Zerstoerungsfreie Tragfaehigkeitsbestimmung fuer starre Deckenkonstruktionen

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, U. (Bauakademie, IHLGB, Berlin (Germany))

    1991-01-01

    Actual parameters of the bearing capacity of traffic areas are in case of intensive use an indispensable necessity for the determination of the remaining use value with the aim to optimize reinforcing layers and reconstruction periods. Until now there is only one adequate measuring method for flexible layers. With the Rollig load test (RLT) initial data can be gained for the calculation of the load bearing capacity of rigid pavement structures. The method is described with the example of an airplane runway. (BWI).

  12. Determination of Orbiter and Carrier Aerodynamic Coefficients from Load Cell Measurements

    Science.gov (United States)

    Glenn, G. M.

    1976-01-01

    A method of determining orbiter and carrier total aerodynamic coefficients from load cell measurements is required to support the inert and the captive active flights of the ALT program. A set of equations expressing the orbiter and carrier total aerodynamic coefficients in terms of the load cell measurements, the sensed dynamics of the Boeing 747 (carrier) aircraft, and the relative geometry of the orbiter/carrier is derived.

  13. Determination of favourable areas for uranium prospecting in Bolivia

    International Nuclear Information System (INIS)

    Pardo, E.

    1981-01-01

    The most prominent geological, lithological, stratigraphic, orogenic, metallogenetic, palaeogeographic and geochemical features favourable for the concentration of uranium deposits in Bolivia are described. This is a generalized study of the features mentioned above and should provide guidelines for eventual better understanding of the geology of Bolivia in general and that of uranium in particular. The purpose here is to demonstrate rational planning, which should be followed by the determination of favourable areas for uranium exploration, by the Bolivian Nuclear Energy Commission/Comision Boliviana de Energia Nuclear (COBOEN), and to provide basic information for the drawing up of contracts with foreign and/or national organizations interested in investing in uranium exploration. (author)

  14. 40 CFR 86.229-94 - Road load force, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.229-94 Section 86.229-94 Protection of Environment ENVIRONMENTAL... § 86.229-94 Road load force, test weight, and inertia weight class determination. (a) Flywheels... vehicle weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up-1,062 1,000 1,000...

  15. Determinants of Entrepreneurial Intention among Prospective Graduates of Higher Institutions Case of Wolaita Sodo University

    Science.gov (United States)

    Tegegn, Tesfahun; Paulos, Mesfin; Desalegn, Yonatan

    2016-01-01

    This study entitled "Determinants of Entrepreneurial Intention among Prospective Graduates of Higher Institutions, Case of Wolaita Sodo University" aimed at profiling entrepreneurship among graduating class students at WSU and identify determinants of their entrepreneurial intentions. The study used survey design and collected…

  16. Simplified static method for determining seismic loads on equipment in moderate and high hazard facilities

    International Nuclear Information System (INIS)

    Scott, M.A.; Holmes, P.A.

    1991-01-01

    A simplified static analysis methodology is presented for qualifying equipment in moderate and high-hazard facility-use category structures, where the facility use is defined in Design and Evaluation Guidelines for Department of Energy Facilities Subjected to Natural Phenomena Hazards, UCRL-15910. Currently there are no equivalent simplified static methods for determining seismic loads on equipment in these facility use categories without completing dynamic analysis of the facility to obtain local floor accelerations or spectra. The requirements of UCRL-15910 specify the use of open-quotes dynamicclose quotes analysis methods, consistent with Seismic Design Guidelines for Essential Buildings, Chapter 6, open-quotes Nonstructural Elements,close quotes TM5-809-10-1, be used for determining seismic loads on mechanical equipment and components. Chapter 6 assumes that the dynamic analysis of the facility has generated either floor response spectra or model floor accelerations. These in turn are utilized with the dynamic modification factor and the actual demand and capacity ratios to determine equipment loading. This complex methodology may be necessary to determine more exacting loads for hard to qualify equipment but does not provide a simple conservative loading methodology for equipment with ample structural capacity

  17. Thermally determining flow and/or heat load distribution in parallel paths

    Science.gov (United States)

    Chainer, Timothy J.; Iyengar, Madhusudan K.; Parida, Pritish R.

    2016-12-13

    A method including obtaining calibration data for at least one sub-component in a heat transfer assembly, wherein the calibration data comprises at least one indication of coolant flow rate through the sub-component for a given surface temperature delta of the sub-component and a given heat load into said sub-component, determining a measured heat load into the sub-component, determining a measured surface temperature delta of the sub-component, and determining a coolant flow distribution in a first flow path comprising the sub-component from the calibration data according to the measured heat load and the measured surface temperature delta of the sub-component.

  18. Identification of critical equipment and determination of operational limits in helium refrigerators under pulsed heat load

    Science.gov (United States)

    Dutta, Rohan; Ghosh, Parthasarathi; Chowdhury, Kanchan

    2014-01-01

    Large-scale helium refrigerators are subjected to pulsed heat load from tokamaks. As these plants are designed for constant heat loads, operation under such varying load may lead to instability in plants thereby tripping the operation of different equipment. To understand the behavior of the plant subjected to pulsed heat load, an existing plant of 120 W at 4.2 K and another large-scale plant of 18 kW at 4.2 K have been analyzed using a commercial process simulator Aspen Hysys®. A similar heat load characteristic has been applied in both quasi steady state and dynamic analysis to determine critical stages and equipment of these plants from operational point of view. It has been found that the coldest part of both the cycles consisting JT-stage and its preceding reverse Brayton stage are the most affected stages of the cycles. Further analysis of the above stages and constituting equipment revealed limits of operation with respect to variation of return stream flow rate resulted from such heat load variations. The observations on the outcome of the analysis can be used for devising techniques for steady operation of the plants subjected to pulsed heat load.

  19. The scratch test - Different critical load determination techniques. [adhesive strength of thin hard coatings

    Science.gov (United States)

    Sekler, J.; Hintermann, H. E.; Steinmann, P. A.

    1988-01-01

    Different critical load determination techniques such as microscopy, acoustic emission, normal, tangential, and lateral forces used for scratch test evaluation of complex or multilayer coatings are investigated. The applicability of the scratch test to newly developed coating techniques, systems, and applications is discussed. Among the methods based on the use of a physical measurement, acoustic emission detection is the most effective. The dynamics ratio between the signals below and above the critical load for the acoustic emission (much greater than 100) is well above that obtained with the normal, tangential, and lateral forces. The present commercial instruments are limited in load application performance. A scratch tester able to apply accurate loads as low as 0.01 N would probably overcome most of the actual limitations and would be expected to extend the scratch testing technique to different application fields such as optics and microelectronics.

  20. Paxillin localisation in osteocytes-Is it determined by the direction of loading?

    International Nuclear Information System (INIS)

    Vatsa, A.; Semeins, C.M.; Smit, T.H.; Klein-Nulend, J.

    2008-01-01

    External mechanical loading of cells aligns cytoskeletal stress fibres in the direction of principle strains and localises paxillin to the mechanosensing region. If the osteocyte cell body can indeed directly sense matrix strains, then cytoskeletal alignment and distribution of paxillin in osteocytes in situ will bear alignment to the different mechanical loading patterns in fibulae and calvariae. We used confocal microscopy to visualise the immunofluorescence-labelled actin cytoskeleton in viable osteocytes and paxillin distribution in fixated osteocytes in situ. In fibular osteocyte cell bodies, actin cytoskeleton and nuclei were elongated and aligned parallel to the principal (longitudinal) mechanical loading direction. Paxillin was localised to the 'poles' of elongated osteocyte cell bodies. In calvarial osteocyte cell bodies, actin cytoskeleton and nuclei were relatively more round. Paxillin was distributed evenly in the osteocyte cell bodies. Thus in osteocyte cell bodies in situ, the external mechanical loading pattern likely determines the orientation of the actin cytoskeleton, and focal adhesions mediate direct mechanosensation of matrix strains.

  1. Apparatuses and methods of determining if a person operating equipment is experiencing an elevated cognitive load

    Science.gov (United States)

    Watkins, Michael L.; Keller, Paul Edwin; Amaya, Ivan A.

    2015-06-16

    A method of, and apparatus for, determining if a person operating equipment is experiencing an elevated cognitive load, wherein the person's use of a device at a first time is monitored so as to set a baseline signature. Then, at a later time, the person's use of the device is monitored to determine the person's performance at the second time, as represented by a performance signature. This performance signature can then be compared against the baseline signature to predict whether the person is experiencing an elevated cognitive load.

  2. ENERGY EFFICIENCY DETERMINATION OF LOADING-BACK SYSTEM OF ELECTRIC TRACTION MACHINES

    Directory of Open Access Journals (Sweden)

    A. M. Afanasov

    2014-03-01

    Full Text Available Purpose.Acceptance post-repair testsof electric traction machinesare conducted onloading-backstandsthat reducethe overall power costsfor the tests.Currentlya numberof possiblecircuit designs of loading-backsystems of electric machines are known, but there is nomethod of determiningtheir energy efficiency. This in turn makes difficult the choiceof rationaloptions. The purpose of the article is the development of the corresponding methodo-logy to make easier this process. Methodology. Expressions for determining theenergy efficiency ofa stand for testingof electric traction machineswere obtained using the generalizedscheme analysisof energy transformationsin the loading-backsystems of universal structure. Findings.Thetechnique wasoffered and the analytical expressions for determining the energy efficiency of loading-backsystemsof electric traction machines wereobtained. Energy efficiency coefficientofloading-backsystemisproposed to consider as the ratio of the total actionenergy of the mechanical and electromotive forces, providing anchors rotation and flowof currents in electric machines, which are being tested,to the total energy, consumed during the test from the external network. Originality. The concept was introduced and the analytical determination method of the energy efficiency of loading-backsystem in electric traction machines was offered. It differs by efficiency availability of power sources and converters, as well as energy efficiency factors of indirect methods of loss compensation. Practical value. The proposed technique of energy efficiency estimation of a loading-backsystemcan be used in solving the problem of rational options choice of schematics stands decisions for electric traction machines acceptance tests of main line and industrial transport.

  3. Determination of strength exercise intensities based on the load-power-velocity relationship.

    Science.gov (United States)

    Jandačka, Daniel; Beremlijski, Petr

    2011-06-01

    The velocity of movement and applied load affect the production of mechanical power output and subsequently the extent of the adaptation stimulus in strength exercises. We do not know of any known function describing the relationship of power and velocity and load in the bench press exercise. The objective of the study is to find a function modeling of the relationship of relative velocity, relative load and mechanical power output for the bench press exercise and to determine the intensity zones of the exercise for specifically focused strength training of soccer players. Fifteen highly trained soccer players at the start of a competition period were studied. The subjects of study performed bench presses with the load of 0, 10, 30, 50, 70 and 90% of the predetermined one repetition maximum with maximum possible speed of movement. The mean measured power and velocity for each load (kg) were used to develop a multiple linear regression function which describes the quadratic relationship between the ratio of power (W) to maximum power (W) and the ratios of the load (kg) to one repetition maximum (kg) and the velocity (m•s(-1)) to maximal velocity (m•s(-1)). The quadratic function of two variables that modeled the searched relationship explained 74% of measured values in the acceleration phase and 75% of measured values from the entire extent of the positive power movement in the lift. The optimal load for reaching maximum power output suitable for the dynamics effort strength training was 40% of one repetition maximum, while the optimal mean velocity would be 75% of maximal velocity. Moreover, four zones: maximum power, maximum velocity, velocity-power and strength-power were determined on the basis of the regression function.

  4. Standard test method for determination of breaking strength of ceramic tiles by three-point loading

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This test method covers the determination of breaking strength of ceramic tiles by three-point loading. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  5. Parameter studies to determine sensitivity of slug impact loads to properties of core surrounding structures

    International Nuclear Information System (INIS)

    Gvildys, J.

    1985-01-01

    A sensitivity study of the HCDA slug impact response of fast reactor primary containment to properties of core surrounding structures was performed. Parameters such as the strength of the radial shield material, mass, void, and compressibility properties of the gas plenum material, mass of core material, and mass and compressibility properties of the coolant were used as variables to determine the magnitude of the slug impact loads. The response of the reactor primary containment and the partition of energy were also given. A study was also performed using water as coolant to study the difference in slug impact loads

  6. Immediate occlusal loading of NanoTite PREVAIL implants: a prospective 1-year clinical and radiographic study.

    Science.gov (United States)

    Ostman, Pär-Olov; Wennerberg, Ann; Albrektsson, Tomas

    2010-03-01

    Recently, a new implant surface texture, featuring application of nanometer-scale calcium phosphate has been shown to enhance early bone fixation and formation in preclinical studies and in human histomorphometric studies, which may be beneficial in immediate loading situations. The purpose of the present prospective clinical study was to, during 1 year, clinically and radiographically evaluate a nanometer scale surface modified implant placed for immediate loading of fixed prostheses in both maxillary and mandibular regions. Thirty-five out of 38 patients who needed implant treatment and met inclusion criteria agreed to participate in the study and were consecutively enrolled. Surgical implant placement requirements consisted of a final torque of a least 25 Ncm prior to final seating and an implant stability quotient above 55. A total of 102 NanoTite PREVAIL (NTP) implants (BIOMET 3i, Palm Beach Gardens, FL, USA) (66 maxillary and 36 mandibular) were placed by one investigator, and the majority of these were placed in posterior regions (65%) and in soft bone (69%). A total of 44 prosthetic constructions were evaluated consisting of 14 single-tooth restorations, 26 fixed partial dentures, and four complete fixed restorations. All provisional constructions were delivered within 1 hour, and the final constructions placed after 4 months. Implants were monitored for clinical and radiographic outcomes at follow-up examinations scheduled for 3, 6, and 12 months. Of the 102 study implants, one implant failed. The simple cumulative survival rate value at 1 year was 99.2%. The average marginal bone resorption was 0.37 mm (SD 0.39) during the first year in function. According to the success criteria of Albrektsson and Zarb, success grade 1 was found with 93% of the implants. Although limited to the short follow-up, immediate loading of NanoTite Prevail implants seems to be a viable option in implant rehabilitation, at least when a good initial fixation is achieved.

  7. Determination of the wind power systems load to achieve operation in the maximum energy area

    Science.gov (United States)

    Chioncel, C. P.; Tirian, G. O.; Spunei, E.; Gillich, N.

    2018-01-01

    This paper analyses the operation of the wind turbine, WT, in the maximum power point, MPP, by linking the load of the Permanent Magnet Synchronous Generator, PMSG, with the wind speed value. The load control methods at wind power systems aiming an optimum performance in terms of energy are based on the fact that the energy captured by the wind turbine significantly depends on the mechanical angular speed of the wind turbine. The presented control method consists in determining the optimal mechanical angular speed, ωOPTIM, using an auxiliary low power wind turbine, WTAUX, operating without load, at maximum angular velocity, ωMAX. The method relies on the fact that the ratio ωOPTIM/ωMAX has a constant value for a given wind turbine and does not depend on the time variation of the wind speed values.

  8. Ferrocyanide safety program: Heat load and thermal characteristics determination for selected tanks

    International Nuclear Information System (INIS)

    McLaren, J.M.; Cash, R.J.

    1993-11-01

    An analysis was conducted to determine the heat loads, conductivities, and heat distributions of waste tanks 241-BY-105, -106, -108, -110, -111, and 241-C-109 at the Hanford Site. The heat distribution of tank 241-BY-111 was determined to be homogeneously distributed throughout the sludge contained in the tank. All of the other tanks, with the exception of 241-C-109, showed evidence of a heat-producing layer at the bottom of the tanks. No evidence of a heat-producing layer in a position above the bottom was found. The thermal conductivities were determined to be within the ranges found by previous laboratory and computer analysis. The heat loads of the tanks were found to be below 2.81 kW (9,600 Btu/hr)

  9. Application of HPLC-DAD Technique for Determination of Phenolic Compounds in Bee Pollen Loads

    Directory of Open Access Journals (Sweden)

    Waś Ewa

    2017-06-01

    Full Text Available A method was elaborated to determine phenolic compounds (vanillin, caffeic, p-coumaric and salicylic acids, and flavonoids: rutin, hesperetin, quercetin, pinocembrin, apigenin, kaempferol, isorhamnetin, chrysin, and acacetin in bee pollen loads using highperformance liquid chromatography with a diode array detector (HPLC-DAD. Phenolic compounds from bee pollen were isolated on Cleanert C18-SPE columns (500 mg/6 mL, Agela Technologies. Polyphenols were identified by comparing the retention times and spectra of compounds found in pollen load samples with the ones of the standard mixture. Quantitative analysis was conducted using the external standard method. In addition, basic validation parameters for the method were determined. For the identified compounds (except for the salicylic acid, satisfactory (≥0.997 linear correlations were obtained. The elaborated method showed high repeatability and inter-laboratory reproducibility. Variability coeffcients of the majority of phenolic compounds did not exceed 10% in conditions of repeatability and inter-laboratory reproducibility, and for the total polyphenolic content they were 1.7 and 5.1%, respectively. The pollen load samples (n = 15 differed in qualitative and quantitative composition of the phenolic compounds. In all the samples, we identified the p-coumaric and salicylic acids and flavonoids rutin, hesperetin, and apigenin nevertheless, these compounds’ contents significantly differed among individual samples. The total phenolic content in the tested samples of pollen loads ranged from 0.653 to 5.966 mg/100 g (on average 2.737 mg/100 g.

  10. Surface pressure and aerodynamic loads determination of a transonic airfoil based on particle image velocimetry

    International Nuclear Information System (INIS)

    Ragni, D; Ashok, A; Van Oudheusden, B W; Scarano, F

    2009-01-01

    The present investigation assesses a procedure to extract the aerodynamic loads and pressure distribution on an airfoil in the transonic flow regime from particle image velocimetry (PIV) measurements. The wind tunnel model is a two-dimensional NACA-0012 airfoil, and the PIV velocity data are used to evaluate pressure fields, whereas lift and drag coefficients are inferred from the evaluation of momentum contour and wake integrals. The PIV-based results are compared to those derived from conventional loads determination procedures involving surface pressure transducers and a wake rake. The method applied in this investigation is an extension to the compressible flow regime of that considered by van Oudheusden et al (2006 Non-intrusive load characterization of an airfoil using PIV Exp. Fluids 40 988–92) at low speed conditions. The application of a high-speed imaging system allows the acquisition in relatively short time of a sufficient ensemble size to compute converged velocity statistics, further translated in turbulent fluctuations included in the pressure and loads calculation, notwithstanding their verified negligible influence in the computation. Measurements are performed at varying spatial resolution to optimize the loads determination in the wake region and around the airfoil, further allowing us to assess the influence of spatial resolution in the proposed procedure. Specific interest is given to the comparisons between the PIV-based method and the conventional procedures for determining the pressure coefficient on the surface, the drag and lift coefficients at different angles of attack. Results are presented for the experiments at a free-stream Mach number M = 0.6, with the angle of attack ranging from 0° to 8°

  11. Working Memory Load and Reminder Effect on Event-Based Prospective Memory of High- and Low-Achieving Students in Math

    Science.gov (United States)

    Chen, Youzhen; Lian, Rong; Yang, Lixian; Liu, Jianrong; Meng, Yingfang

    2017-01-01

    The effects of working memory (WM) demand and reminders on an event-based prospective memory (PM) task were compared between students with low and high achievement in math. WM load (1- and 2-back tasks) was manipulated as a within-subject factor and reminder (with or without reminder) as a between-subject factor. Results showed that high-achieving…

  12. Determination of Rock Mass Modulus Using the Plate Loading Method at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Finley, R.E.; George, J.T.; Riggins, M.

    1999-01-01

    A suite of plate loading tests has recently been conducted by Sandia National Laboratories at the Exploratory Studies Facility at Yucca Mountain, Nevada. Fielding of these in situ tests as well as other approaches undertaken for the determination of rock mass modulus are described. The various methodologies are evaluated and their data compared. Calculation by existing empirical methods and numerical modeling are compared to each other as well as to field data

  13. Determination of thermal reactivity coefficients for the first fuel loading of MO34

    International Nuclear Information System (INIS)

    Lueley, J.; Vrban, B.; Farkas, G.; Hascik, J.; Hinca, R.; Petriska, M.; Slugen, V.

    2012-01-01

    The article introduces determination of thermal reactivity coefficients, especially summarized (isothermal) and moderator (density) reactivity coefficients between 200 grad C and 260 grad C with 2 grad C step, - in compliance with the assignment - for the first fuel loading into the RC of NP Mochovce units using 2 nd generation fuel during the start-up using calculation code MCNP5 1.60. (authors)

  14. Water Quality Assessment and Determining the Carrying Capacity of Pollution Load Batang Kuranji River

    Science.gov (United States)

    Dewata, I.; Adri, Z.

    2018-04-01

    This study aims to determine the water quality and carrying capacity of pollution load Batang Kuranji River in the headwaters, middle, and downstream. This research is descriptive quantitative parameters of pH, BOD, COD, TSS, and DOES Depictions of river water quality refer to RegulationNo.82/2001, while determination of carrying capacity of pollution load river refers to the Kep Men LHNo.10/2003.The result is Kuranji Batang River water quality upstream region included in either category who meet the quality standard first class ofPP82/2001. TSS concentrations at head waters of 21 mg/L, BOD1,6 mg/L, COD7,99mg/L and DO 7,845 mg/L. While the carrying capacity of pollution load river in upstream region included in both categories namely BOD of 4,4 kg/sec, COD 273,60 kg/sec, TSS906,00kg/sec, and DO parameters of 49.20 kg/sec. Middle region (point 2, 3, and 4) water quality Batang Kuranji River has exceeded the quality standard of 82/2001 for class II and class III. Meanwhile, carrying capacity of pollution load river in area included in ugly category. The calculation is done with application Qual2Kw show that carrying capacity of pollution load river of BOD -857.3 kg/sec, COD -777.40 kg/sec, TSS +9511.5 kg/sec, and DO +69.30 kg/sec.

  15. High physical work load and low job satisfaction increase the risk of sickness absence due to low back pain: results of a prospective cohort study.

    Science.gov (United States)

    Hoogendoorn, W E; Bongers, P M; de Vet, H C W; Ariëns, G A M; van Mechelen, W; Bouter, L M

    2002-05-01

    To determine whether physical and psychosocial load at work influence sickness absence due to low back pain. The research was a part of the study on musculoskeletal disorders, absenteeism, stress, and health (SMASH), a 3 year prospective cohort study on risk factors for musculoskeletal disorders. Workers from 21 companies located throughout The Netherlands participated in the part of this study on sickness absence due to low back pain. The study population consisted of 732 workers with no sickness absences of 3 days or longer due to low back pain in the 3 months before the baseline survey and complete data on the reasons for absences during the follow up period. The mean (range) period of follow up in this group was 37 (7-44) months. Physical load at work was assessed by analyses of video recordings. Baseline information on psychosocial work characteristics was obtained by a questionnaire. Data on sickness absence were collected from company records. The main outcome measure was the rate of sickness absences of 3 days or longer due to low back pain during the follow up period. After adjustment of the work related physical and psychosocial factors for each other and for other potential determinants, significant rate ratios ranging from 2.0 to 3.2 were found for trunk flexion, trunk rotation, lifting, and low job satisfaction. A dose-response relation was found for trunk flexion, but not for trunk rotation or lifting. Non-significant rate ratios of about 1.4 were found for low supervisor support and low coworker support. Quantitative job demands, conflicting demands, decision authority, and skill discretion showed no relation with sickness absence due to low back pain. Flexion and rotation of the trunk, lifting, and low job satisfaction are risk factors for sickness absence due to low back pain. Some indications of a relation between low social support, either from supervisors or coworkers, and sickness absence due to low back pain are also present.

  16. Clinical use of carbon-loaded thermoluminescent dosimeters for skin dose determination

    International Nuclear Information System (INIS)

    Ostwald, Patricia M.; Kron, Tomas; Hamilton, Christopher S.; Denham, James W.

    1995-01-01

    Purpose: Carbon-loaded thermoluminescent dosimeters (TLDs) are designed for surface/skin dose measurements. Following 4 years in clinical use at the Mater Hospital, the accuracy and clinical usefulness of the carbon-loaded TLDs was assessed. Methods and Materials: Teflon-based carbon-loaded lithium fluoride (LiF) disks with a diameter of 13 mm were used in the present study. The TLDs were compared with ion chamber readings and TLD extrapolation to determine the effective depth of the TLD measurement. In vivo measurements were made on patients receiving open-field treatments to the chest, abdomen, and groin. Skin entry dose or entry and exit dose were assessed in comparison with doses estimated from phantom measurements. Results: The effective depth of measurement in a 6 MV therapeutic x-ray beam was found to be about 0.10 mm using TLD extrapolation as a comparison. Entrance surface dose measurements made on a solid water phantom agreed well with ion chamber and TLD extrapolation measurements, and black TLDs provide a more accurate exit dose than the other methods. Under clinical conditions, the black TLDs have an accuracy of ± 5% (± 2 SD). The dose predicted from black TLD readings correlate with observed skin reactions as assessed with reflectance spectroscopy. Conclusion: In vivo dosimetry with carbon-loaded TLDs proved to be a useful tool in assessing the dose delivered to the basal cell layer in the skin of patients undergoing radiotherapy

  17. Determination of moving load characteristics by output-only identification over the Pescara beams

    Science.gov (United States)

    Bellino, A.; Garibaldi, L.; Marchesiello, S.

    2011-07-01

    The determination of the characteristics of moving loads over bridges and beams is a topic that only recently has gained the interest of the researchers. In real applications, in fact, as for the case of bridges, it is not always possible to know the load and speed of the trains which are travelling over the bridge. Moreover, in real applications the systems analyzed cannot be always considered linear. Because of these difficulties, the present paper proposes firstly a technique for the identification of the nonlinearity, secondly a procedure to subtract its effect on the modal parameters and finally a method based on them to extract the information on the mass and the speed of the moving load crossing a beam. For this study, some reinforced concrete beams have been tested in the framework of a vast project titled "Monitoring and diagnostics of railway bridges by means of the analysis of the dynamics response due to train crossing", financed by Italian Ministry of Research. These beams show a clear softening nonlinear behaviour during the crossing of a moving carriage. The method is able to detect the load characteristics after having eliminated the nonlinear influence.

  18. Determination of moving load characteristics by output-only identification over the Pescara beams

    International Nuclear Information System (INIS)

    Bellino, A; Garibaldi, L; Marchesiello, S

    2011-01-01

    The determination of the characteristics of moving loads over bridges and beams is a topic that only recently has gained the interest of the researchers. In real applications, in fact, as for the case of bridges, it is not always possible to know the load and speed of the trains which are travelling over the bridge. Moreover, in real applications the systems analyzed cannot be always considered linear. Because of these difficulties, the present paper proposes firstly a technique for the identification of the nonlinearity, secondly a procedure to subtract its effect on the modal parameters and finally a method based on them to extract the information on the mass and the speed of the moving load crossing a beam. For this study, some reinforced concrete beams have been tested in the framework of a vast project titled M onitoring and diagnostics of railway bridges by means of the analysis of the dynamics response due to train crossing , financed by Italian Ministry of Research. These beams show a clear softening nonlinear behaviour during the crossing of a moving carriage. The method is able to detect the load characteristics after having eliminated the nonlinear influence.

  19. Extent and Determinants of Error in Doctors' Prognoses in Terminally Ill Patients: Prospective Cohort Study

    OpenAIRE

    Lamont, Elizabeth; Christakis, Nicholas

    2000-01-01

    Objective: To describe doctors' prognostic accuracy in terminally ill patients and to evaluate the determinants of that accuracy. Design: Prospective cohort study. Setting: Five outpatient hospice programmes in Chicago. Participants: 343 doctors provided survival estimates for 468 terminally ill patients at the time of hospice referral. Main outcome measures: Patients' estimated and actual survival. Results: Median survival was 24 days. Only 20% (92/468) of predictions were acc...

  20. 76 FR 71354 - Certain Muzzle-Loading Firearms and Components Thereof Determination To Review in Part ALJ...

    Science.gov (United States)

    2011-11-17

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-777] Certain Muzzle-Loading Firearms and Components Thereof Determination To Review in Part ALJ Initial Determination; Denial of Temporary Relief... importation, and the sale within the United States after importation of certain muzzle-loading firearms and...

  1. A Prospective Study of Early Loaded Single Implant-Retained Mandibular Overdentures: Preliminary One-Year Results

    Directory of Open Access Journals (Sweden)

    Ali M. El-Sheikh

    2012-01-01

    Full Text Available Purpose. To investigate the predictability of simplifying mandibular overdenture treatment using one-stage surgery and early prosthetic loading of a single implant. Materials and Methods. Twenty edentulous patients with problematic existing mandibular dentures were treated. A single implant with a chemically modified surface (SLActive, Straumann AG, Basel, Switzerland was placed into the mandibular midline. The patients were recalled at 3, 6 and 12 months. Clinical assessments and marginal bone loss using standardized radiographs were recorded. All complications, failures and maintenance were noted. Visual analog-scale questionnaires were used to record patient satisfaction in five categories. ANOVA was used to determine differences between means of marginal bone loss and different categories of patient staisfaction (=0.05. Results. The 20 early loaded implants were all surviving at the 12-month recall. All implants showed less than 1 mm of marginal bone loss by the end of the 1-year with a significant increase during the follow-up period. Few prosthetic problems were reported. Patient satisfaction was high with a significant increase in all comfort and functional parameters. Conclusions. These preliminary 1-year results indicate that early loading of a single chemically modified surface implant used to retain a mucosa-borne mandibular overdenture is a safe, reliable, and cost-effective treatment.

  2. Immediate occlusal loading of NanoTite™ tapered implants: a prospective 1-year clinical and radiographic study.

    Science.gov (United States)

    Östman, Pär-Olov; Wennerberg, Ann; Ekestubbe, Annika; Albrektsson, Tomas

    2013-12-01

    During the last decade, high success rates have been reported for implants placed with immediate loading procedures, especially when bone quality and quantity provide good implant stability. In many of these studies, straight-walled implants with moderately rough surfaces were employed. Tapered implants are becoming increasingly more popular due to standardized drilling protocols and reports of high initial primary stability. The aim of the present prospective, single center clinical study was to evaluate surface topographical analysis and the clinical and radiographic outcomes of the NanoTite™ (BIOMET 3i, Palm Beach Gardens, FL, USA) Tapered Implant when used for immediate loading of fixed prostheses and single-tooth restorations. Forty-two patients who needed implant treatment and met admission criteria agreed to participate in the study and were consecutively enrolled. Surgical implant placement requirements consisted of a final torque of a least 30 Ncm prior to final seating and an implant stability quotient above 55. A total of 139 NanoTite Tapered implants (112 maxillary and 27 mandibular) were placed by one investigator, and the majority of these implants (n = 77/55%) were placed in posterior regions, and in soft bone (n = 90/65%). A total of 57 prosthetic constructions were evaluated consisting of 20 single-tooth restorations, 30 fixed partial dentures, and 7 complete, fixed maxillary restorations. Radiographs were taken at baseline and at 12 months of follow-up. Of the 139 study implants, one implant failure was declared. The overall cumulative survival rate at 1 year is 99.4%. Mean marginal bone resorption is 1.01 mm (SD 0.85) during the first year of function. Although limited to the short follow-up, immediate loading of NanoTite Tapered implants seems to be a viable option in implant rehabilitation, when insertion torque of at least 30 Ncm is achieved. Further studies are needed to authenticate the finding of this study. © 2012 Wiley

  3. Immediate occlusal loading of implants in the partially edentate mandible: a prospective 1-year radiographic and 4-year clinical study.

    Science.gov (United States)

    Ostman, Pär-Olov; Hellman, Mats; Sennerby, Lars

    2008-01-01

    The purpose of the present prospective clinical study was to evaluate the radiographic and clinical outcome of immediately loaded implants in the partial edentulous mandible over a 4-year follow-up period using a modified surgical protocol, primary implant stability criteria, and splinting for inclusion. Patients in need of implant treatment in the partial edentate mandible were consecutively included in the study. The implant sites were underprepared to obtain maximal stability. Inclusion criteria for the study were torque of a least 30 Ncm before final seating of the implant and an ISQ greater than 60. A provisional fixed partial denture was delivered within 24 hours and a definitive fixed partial denture within 3 months. The patients were monitored with clinical and radiographic follow-up examinations for up to 4 years. Stability of the implants was measured with resonance frequency analysis at placement and after 6 months. Ninety-six patients were evaluated, and 77 patients who met the inclusion criteria were included. A total of 111 fixed partial dentures supported by 257 Brånemark System implants (77 turned and 180 TiUnite implants) were delivered. Four (1.6%) of the 257 implants did not osseointegrate, giving an overall survival rate of 98.4% after 4 years. Three turned (3.9%) implants and 1 oxidized implant (0.6%) failed after 4 to 13 months. The average marginal bone resorption was 0.7 mm (SD 0.78) during the first year in function. Turned implants showed an average bone loss of 0.5 mm (SD 0.8) and oxidized implants an average of 0.7 mm (SD 0.8). Resonance frequency analysis showed a mean implant stability quotient of 72.2 (SD 7.5) at placement and 72.5 (SD 5.7) after 6 months of loading. It is concluded that immediate loading of implants with firm primary stability in partially edentulous areas of the mandible appears to be a viable procedure with predictable outcome.

  4. 77 FR 5568 - Certain Muzzle-Loading Firearms and Components Thereof Determination Not To Review an Initial...

    Science.gov (United States)

    2012-02-03

    ... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-777] Certain Muzzle-Loading Firearms and Components Thereof Determination Not To Review an Initial Determination Terminating the Investigation AGENCY: U.S. International Trade Commission. [[Page 5569

  5. Walking economy is predictably determined by speed, grade, and gravitational load.

    Science.gov (United States)

    Ludlow, Lindsay W; Weyand, Peter G

    2017-11-01

    The metabolic energy that human walking requires can vary by more than 10-fold, depending on the speed, surface gradient, and load carried. Although the mechanical factors determining economy are generally considered to be numerous and complex, we tested a minimum mechanics hypothesis that only three variables are needed for broad, accurate prediction: speed, surface grade, and total gravitational load. We first measured steady-state rates of oxygen uptake in 20 healthy adult subjects during unloaded treadmill trials from 0.4 to 1.6 m/s on six gradients: -6, -3, 0, 3, 6, and 9°. Next, we tested a second set of 20 subjects under three torso-loading conditions (no-load, +18, and +31% body weight) at speeds from 0.6 to 1.4 m/s on the same six gradients. Metabolic rates spanned a 14-fold range from supine rest to the greatest single-trial walking mean (3.1 ± 0.1 to 43.3 ± 0.5 ml O 2 ·kg -body -1 ·min -1 , respectively). As theorized, the walking portion (V̇o 2-walk  =  V̇o 2-gross - V̇o 2-supine-rest ) of the body's gross metabolic rate increased in direct proportion to load and largely in accordance with support force requirements across both speed and grade. Consequently, a single minimum-mechanics equation was derived from the data of 10 unloaded-condition subjects to predict the pooled mass-specific economy (V̇o 2-gross , ml O 2 ·kg -body + load -1 ·min -1 ) of all the remaining loaded and unloaded trials combined ( n = 1,412 trials from 90 speed/grade/load conditions). The accuracy of prediction achieved ( r 2  = 0.99, SEE = 1.06 ml O 2 ·kg -1 ·min -1 ) leads us to conclude that human walking economy is predictably determined by the minimum mechanical requirements present across a broad range of conditions. NEW & NOTEWORTHY Introduced is a "minimum mechanics" model that predicts human walking economy across a broad range of conditions from only three variables: speed, surface grade, and body-plus-load mass. The derivation

  6. Effective Method for Determining Environmental Loads on Supporting Structures for Offshore Wind Turbines

    Directory of Open Access Journals (Sweden)

    Dymarski Paweł

    2016-01-01

    Full Text Available This paper presents a description of an effective method for determining loads due to waves and current acting on the supporting structures of the offshore wind turbines. This method is dedicated to the structures consisting of the cylindrical or conical elements as well as (truncates pyramids of polygon with a large number of sides (8 or more. The presented computational method is based on the Morison equation, which was originally developed only for cylindrically shaped structures. The new algorithm shown here uses the coefficients of inertia and drag forces that were calculated for non-cylindrical shapes. The analysed structure consists of segments which are truncated pyramids on the basis of a hex decagon. The inertia coefficients, CM, and drag coefficients, CD, were determined using RANSE-CFD calculations. The CFD simulations were performed for a specific range of variation of the period, and for a certain range of amplitudes of the velocity. In addition, the analysis of influence of the surface roughness on the inertia and drag coefficients was performed. In the next step, the computations of sea wave, current and wind load on supporting structure for the fifty-year storm were carried out. The simulations were performed in the time domain and as a result the function of forces distribution along the construction elements was obtained. The most unfavourable distribution of forces will be used, to analyse the strength of the structure, as the design load.

  7. The Determination of Load Profiles and Power Consumptions of Home Appliances

    Directory of Open Access Journals (Sweden)

    Fatih Issi

    2018-03-01

    Full Text Available In recent years, the increment of distributed electricity generation based on renewable energy sources and improvement of communication technologies have caused the development of next-generation power grids known as smart grids. The structures of smart grids have bidirectional communication capability and enable the connection of energy generated from distributed sources to any point on the grid. They also support consumers in energy efficiency by creating opportunities for management of power consumption. The information on power consumption and load profiles of home appliances is essential to perform load management in the dwelling accurately. In this study, the power consumption data for all the basic home appliances, utilized in a two-person family in Çankırı, Turkey, was obtained with high resolution in one-second intervals. The detailed power consumption analysis and load profile were executed for each home appliance. The obtained data is not only the average power consumption of each appliance but also characterizes different operating modes or their cycles. In addition, the impact of these devices on home energy management studies and their standby power consumptions were also discussed. The acquired data is an important source to determine the load profile of individual home appliances precisely in home energy management studies. Although the results of this study do not completely reflect the energy consumption behavior of the people who live in this region, they can reveal the trends in load demands based on a real sample and customer consumption behavior of a typical two-person family.

  8. A New Method for Optimal Regularization Parameter Determination in the Inverse Problem of Load Identification

    Directory of Open Access Journals (Sweden)

    Wei Gao

    2016-01-01

    Full Text Available According to the regularization method in the inverse problem of load identification, a new method for determining the optimal regularization parameter is proposed. Firstly, quotient function (QF is defined by utilizing the regularization parameter as a variable based on the least squares solution of the minimization problem. Secondly, the quotient function method (QFM is proposed to select the optimal regularization parameter based on the quadratic programming theory. For employing the QFM, the characteristics of the values of QF with respect to the different regularization parameters are taken into consideration. Finally, numerical and experimental examples are utilized to validate the performance of the QFM. Furthermore, the Generalized Cross-Validation (GCV method and the L-curve method are taken as the comparison methods. The results indicate that the proposed QFM is adaptive to different measuring points, noise levels, and types of dynamic load.

  9. Working Memory Load and Reminder Effect on Event-Based Prospective Memory of High- and Low-Achieving Students in Math.

    Science.gov (United States)

    Chen, Youzhen; Lian, Rong; Yang, Lixian; Liu, Jianrong; Meng, Yingfang

    The effects of working memory (WM) demand and reminders on an event-based prospective memory (PM) task were compared between students with low and high achievement in math. WM load (1- and 2-back tasks) was manipulated as a within-subject factor and reminder (with or without reminder) as a between-subject factor. Results showed that high-achieving students outperformed low-achieving students on all PM and n-back tasks. Use of a reminder improved PM performance and thus reduced prospective interference; the performance of ongoing tasks also improved for all students. Both PM and n-back performances in low WM load were better than in high WM load. High WM load had more influence on low-achieving students than on high-achieving students. Results suggest that low-achieving students in math were weak at PM and influenced more by high WM load. Thus, it is important to train these students to set up an obvious reminder for their PM and improve their WM.

  10. Load flow analysis for determining the location of NPP power distribution in West Kalimantan

    International Nuclear Information System (INIS)

    Citra Candranurani; Rizki Finnansyah Setya Budi; Sahala M Lumbanraja

    2015-01-01

    Electricity crisis condition happened in West Kalimantan (Kalbar) as a result of power plant capacity almost equal to the peak load. The system will experience a shortfall if there are plants that not operating and do not have reserve. The policy of electricity planning until 2022 is replacing diesel power plant with steam power plant. For long-term planning is required the role of new and renewable energy in order to reduce dependency on fossil fuel consumption, such as NPP utilization. The purpose of this study was to determine the optimum location of the NPP power distribution in order to prepare electricity infrastructure. Load flow calculation in this study using ETAP 12.5 software. NPP is planned to supply base load, so the optimum capacity factor is above 80 %. The result show that there are three location where NPP can generate over 80 % of its capacity, namely: Mempawah Substation, Singkawang Substation, and Sambas Substation. The most optimum located in Mempawah Substation with capacity factor 83.5 %. The location of the three Substation are onshore and in line with one requirement for NPP construction, namely: the availability of cooling water. (author)

  11. The application of radioactive tracers for determination of bed-load transport in alluvial rivers

    International Nuclear Information System (INIS)

    Thomsen, T.

    1980-01-01

    Radioactive isotopes have been applied for determining the transport rate of bed load in an alluvial river on the basis of: centroid velocity of the tracer particles, size and material-transporting width of mobile layer. These parameters were found by detailed measurements in the field. Computed values were produced on the basis of Engelund and Fredsoee's model on sediment transport and on the propagation of bed forms. When comparing measured and computed values, the difference was about 25%. Finally, the applicability of tracer methods for solving practical problem is discussed. (author)

  12. Determination of the usage factor of components after cyclic loading using high-resolution microstructural investigations

    International Nuclear Information System (INIS)

    Seibold, A.; Scheibe, A.; Assmann, H.D.

    1989-01-01

    The usage factor can be derived from the quantification of the structure changes and the allocation of the microstructural state to the fatigue curves of the component materials. Using the example of the low alloy fine grain structural steel 20 Mn Mo Ni 5 5 (annealed structure), the relationship between micro-structure and the number of load cycles is shown in the form of a calibration curve. By high resolution structural investigation, the usage factor can be determined to n = N/N B ≅ 0.5 under given vibration stress. Only a small volume sample is required for the electron microscope examination. (orig./DG) [de

  13. H-M bearing capacity of a modified suction caisson determined by using load-/displacement-controlled methods

    Science.gov (United States)

    Zhang, Yu-kun; Gao, Yu-feng; Li, Da-yong; Mahfouz, Ali H.

    2016-12-01

    This paper presents a series of monotonically combined lateral loading tests to investigate the bearing capacity of the MSCs (modified suction caissons) in the saturated marine fine sand. The lateral loads were applied under load- and displacement-controlled methods at the loading eccentricity ratios of 1.5, 2.0 and 2.5. Results show that, in the displacement-controlled test, the deflection-softening behavior of load-deflection curves for MSCs was observed, and the softening degree of the load-deflection response increased with the increasing external skirt length or the decreasing loading eccentricity. It was also found that the rotation center of the MSC at failure determined by the load-controlled method is slightly lower than that by the displacement-controlled method. The calculated MSC capacity based on the rotation center position in serviceability limit state is relatively conservative, compared with the calculated capacity based on the rotation center position in the ultimate limit state. In the limit state, the passive earth pressures opposite the loading direction under load- and displacement-controlled methods decrease by 46% and 74% corresponding to peak values, respectively; however, the passive earth pressures in the loading direction at failure only decrease by approximately 3% and 7%, compared with their peak values.

  14. Cognitive Load and Self-Determination Theories Applied to E-Learning : Impact on Students' Participation and Academic Performance

    NARCIS (Netherlands)

    de Araujo Guerra Grangeia, Tiago; de Jorge, Bruno; Franci, Daniel; Martins Santos, Thiago; Vellutini Setubal, Maria Silvia; Schweller, Marcelo; de Carvalho-Filho, Marco Antonio

    2016-01-01

    BACKGROUND: Emergency clerkships expose students to a stressful environment that require multiple tasks, which may have a direct impact on cognitive load and motivation for learning. To address this challenge, Cognitive Load Theory and Self Determination Theory provided the conceptual frameworks to

  15. 40 CFR 86.129-94 - Road load power, test weight, inertia weight class determination, and fuel temperature profile.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, inertia... Procedures § 86.129-94 Road load power, test weight, inertia weight class determination, and fuel temperature... duty trucks 1,2,3 Test weightbasis 4,5 Test equivalent test weight(pounds) Inertia weight class(pounds...

  16. Derivative load voltage and particle swarm optimization to determine optimum sizing and placement of shunt capacitor in improving line losses

    Directory of Open Access Journals (Sweden)

    Mohamed Milad Baiek

    2016-12-01

    Full Text Available The purpose of this research is to study optimal size and placement of shunt capacitor in order to minimize line loss. Derivative load bus voltage was calculated to determine the sensitive load buses which further being optimum with the placement of shunt capacitor. Particle swarm optimization (PSO was demonstrated on the IEEE 14 bus power system to find optimum size of shunt capacitor in reducing line loss. The objective function was applied to determine the proper placement of capacitor and get satisfied solutions towards constraints. The simulation was run over Matlab under two scenarios namely base case and increasing 100% load. Derivative load bus voltage was simulated to determine the most sensitive load bus. PSO was carried out to determine the optimum sizing of shunt capacitor at the most sensitive bus. The results have been determined that the most sensitive bus was bus number 14 for the base case and increasing 100% load. The optimum sizing was 8.17 Mvar for the base case and 23.98 Mvar for increasing load about 100%. Line losses were able to reduce approximately 0.98% for the base case and increasing 100% load reduced about 3.16%. The proposed method was also proven as a better result compared with harmony search algorithm (HSA method. HSA method recorded loss reduction ratio about 0.44% for the base case and 2.67% when the load was increased by 100% while PSO calculated loss reduction ratio about 1.12% and 4.02% for the base case and increasing 100% load respectively. The result of this study will support the previous study and it is concluded that PSO was successfully able to solve some engineering problems as well as to find a solution in determining shunt capacitor sizing on the power system simply and accurately compared with other evolutionary optimization methods.

  17. Multidisciplinary design and analytic approaches to advance prospective research on the multilevel determinants of child health.

    Science.gov (United States)

    Johnson, Sara B; Little, Todd D; Masyn, Katherine; Mehta, Paras D; Ghazarian, Sharon R

    2017-06-01

    Characterizing the determinants of child health and development over time, and identifying the mechanisms by which these determinants operate, is a research priority. The growth of precision medicine has increased awareness and refinement of conceptual frameworks, data management systems, and analytic methods for multilevel data. This article reviews key methodological challenges in cohort studies designed to investigate multilevel influences on child health and strategies to address them. We review and summarize methodological challenges that could undermine prospective studies of the multilevel determinants of child health and ways to address them, borrowing approaches from the social and behavioral sciences. Nested data, variation in intervals of data collection and assessment, missing data, construct measurement across development and reporters, and unobserved population heterogeneity pose challenges in prospective multilevel cohort studies with children. We discuss innovations in missing data, innovations in person-oriented analyses, and innovations in multilevel modeling to address these challenges. Study design and analytic approaches that facilitate the integration across multiple levels, and that account for changes in people and the multiple, dynamic, nested systems in which they participate over time, are crucial to fully realize the promise of precision medicine for children and adolescents. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Study on Determination Method of Fatigue Testing Load for Wind Turbine Blade

    Science.gov (United States)

    Liao, Gaohua; Wu, Jianzhong

    2017-07-01

    In this paper, the load calculation method of the fatigue test was studied for the wind turbine blade under uniaxial loading. The characteristics of wind load and blade equivalent load were analyzed. The fatigue property and damage theory of blade material were studied. The fatigue load for 2MW blade was calculated by Bladed, and the stress calculated by ANSYS. Goodman modified exponential function S-N curve and linear cumulative damage rule were used to calculate the fatigue load of wind turbine blades. It lays the foundation for the design and experiment of wind turbine blade fatigue loading system.

  19. Direct transverse load profile determination using the polarization-dependent loss spectral response of a chirped fiber Bragg grating.

    Science.gov (United States)

    Descamps, Frédéric; Bette, Sébastien; Kinet, Damien; Caucheteur, Christophe

    2016-06-01

    The determination of stress profiles created by transverse loads was proved to be important in different domains, such as structural health monitoring and biomechanics, and, more specifically, in the prostheses domain. In this paper, we report an original method to estimate the transverse load profile from the polarization-dependent loss (PDL) spectrum of a chirped fiber Bragg grating (CFBG). This method makes use of the relationship between the integration of the PDL of a CFBG, and the force profile has the advantage of not requiring any iterative method to estimate the transverse load profile. The relationship linking the integration of the PDL and the force profile is demonstrated using an analytical approximation of the transmission spectrum of CFBGs. The validity of this method for the determination of non-uniform load profiles is then shown using a numerical analysis. An experimental demonstration is finally reported using a 48 mm-long CFBG subject to different step transverse load profiles.

  20. Effect of horizontal displacements due to ocean tide loading on the determination of polar motion and UT1

    Science.gov (United States)

    Scherneck, Hans-Georg; Haas, Rüdiger

    We show the influence of horizontal displacements due to ocean tide loading on the determination of polar motion and UT1 (PMU) on the daily and subdaily timescale. So called ‘virtual PMU variations’ due to modelling errors of ocean tide loading are predicted for geodetic Very Long Baseline Interferometry (VLBI) networks. This leads to errors of subdaily determination of PMU. The predicted effects are confirmed by the analysis of geodetic VLBI observations.

  1. Testing-Based Approach to Determining the Divergence Speed of Slung Loads

    Directory of Open Access Journals (Sweden)

    Narayanan Komerath

    2018-02-01

    Full Text Available When a rotorcraft carries an external slung load, flight speed is often limited by the fear of divergent oscillations, rather than vehicle performance. Since slung objects can be of any shape, incorporating the aerodynamics with sufficient accuracy to predict safe speed has been a problem. The uncertainty forces certifying authorities to set conservative limits on speed to avoid divergence. Obtaining the aerodynamic coefficients of bluff bodies was excessively time-consuming in experiments, and impractical in computations. This review traces the evolution of progress in the area. Prior thinking was to use computations for prediction, with the computational codes validated using a few samples of experiments. This approach has not led to valid general predictions. Data were sparse and a-priori predictions were rarer. A continuous rotation approach has enabled swift measurements of 6-degrees-of-freedom aerodynamic load maps with high resolution about several axes of rotation. The resulting knowledge base in turn permits a swift determination of dynamics up to divergence, with wind tunnel tests where necessary to fill interpolation gaps in the knowledge base. The essence of efficient and swift dynamics simulation with a few well-tested assumptions is described. Under many relevant conditions, the vehicle flight dynamics can be safely decoupled from those of the slung load. While rotor wake swirl causes the payload to rotate at liftoff and landing, this effect can be incorporated into the simulation. Recent success in explaining two well-documented flight test cases provides strong evidence that predictions can be made for most missions swiftly.

  2. Determination of thermal-hydraulic loads on reactor internals in a DBA-situation

    International Nuclear Information System (INIS)

    Ville Lestinen; Timo Toppila

    2005-01-01

    Full text of publication follows: According to Finnish regulatory requirements, reactor internals have to stay intact in a design basis accident (DBA) situation, so that control rods can still penetrate into the core. To fulfill this demand some criteria must be followed in periodical in-service inspections. This is the motivation for studying and developing more detailed methods for analysis of thermal-hydraulic loads on reactor internals during the DBA-situation for the Loviisa NPP in Finland. The objective of this research program is to connect thermal-hydraulic and mechanical analysis methods with the goal to produce a reliable method for determination of thermal-hydraulic and mechanical loads on reactor internals in the accident situation. The tools studied are thermal-hydraulic system codes, computational fluid dynamics (CFD) codes and finite element analysis (FEA) codes. This paper concentrates mainly on thermal-hydraulic part of the research, but also the mechanical aspects are discussed. Firstly, the paper includes a short literary review of the available methods to analyse the described problem including both thermal-hydraulic and structural analysis parts. Secondly, different possibilities to carry out thermal-hydraulic analyses have been studied. The DBA-case includes complex physical phenomena and therefore modelling is difficult. The accident situation can be for example LLOCA. When the pipe has broken, the pressure decreases and water starts to evaporate, which consumes energy and that way limits the pressure decrease. After some period of time, the system reaches a new equilibrium state. To perform exact thermal-hydraulic analysis also two phase phenomena must be included. Therefore CFD codes are not capable of modelling the DBA situation very well, but the use of CFD codes requires that the effect of two phase flow must be added somehow. One method to calculate two phase phenomena with CFD codes is to use thermal-hydraulic system codes to calculate

  3. Methodological aspects of values for determining the physical load in sport.

    Directory of Open Access Journals (Sweden)

    Chernozub A.A.

    2012-09-01

    Full Text Available The main aspects of the control system of training in sport and identified two methodological concepts determine the amount of physical activity during the training sessions. It is established that the physical training and sports activities in the course of employment estimate the value of physical activity mainly due to the reaction rates of the functional systems of the body to an external stimulus. Such an assessment, especially in a narrow range of controllable parameters (for the reaction of the cardiovascular and respiratory systems, is more theoretical in nature and does not allow to clearly define the critical load levels for a particular organism. This problem highlights the need to use a single, integrated, suitable for precise mathematical analysis of the universal, possibly conditional, indicator or criteria for evaluating physical activity. Development of this criterion will optimize the training process at different stages of training opportunities tailored to individual athletes.

  4. Determination and comparison of microbial loads in atmospheres of two hospitals in Izmir, Turkey.

    Science.gov (United States)

    Aydin Çakir, Nergüze; Uçar, Füsun Bahriye; Haliki Uztan, Alev; Corbaci, Cengiz; Akpinar, Onur

    2013-01-01

    Nosocomial infections, also known as hospital-acquired infections, has become one of the most important health problems in health care units worldwide. The presented study aims to determine the average amount of microorganism loads and to show that the atmospheres of the two hospitals can be a potential source regarding nosocomial infections. The effect of surface and floor disinfection processes in the two hospitals and the antibiotic susceptibility of the bacterial isolates were also evaluated. Microorganisms were isolated from air samples collected from different areas (patient wards, corridors, operating theatres and postoperative units) of the two hospitals in Izmir. Sampling was conducted between December 2006 - March 2007. During the 3-month sampling period, the average number of live microorganisms in the air samples collected from second-class environments in the hospital 1 and the hospital 2 was found to be 224.44 and 536.66 cfu/m(3) , respectively. The average number of microorganisms in hospital 2 collected before the disinfection process was higher than those after the disinfection process. However, because of the closure of the air-conditioning system and the hepa filters after the disinfection process, this was reversed in hospital 1. In total, 54 and 42 isolates were obtained from hospital 1 and hospital 2, respectively. 49 isolates from hospital 1 and 35 isolates from hospital 2 were identified as Staphylacoccus sp. The remaining isolates were identified as Aerococcus sp. and Enterococcus sp. Pseudomonas sp. was not determined in the air samples of the two hospitals. It was detected that the microbial loads in the atmospheres of the two hospitals studied varied greatly depending on the number of people in the environment. As the results indicate, the total number of microorganisms in the atmospheres of operating theatres in both hospitals does not pose a threat according to the Air Microbe Index.

  5. Determine Minimum Silver Flake Addition to GCM for Iodine Loaded AgZ

    Energy Technology Data Exchange (ETDEWEB)

    Garino, Terry J.; Nenoff, Tina M.; Rodriguez, Mark A.

    2014-04-01

    The minimum amount of silver flake required to prevent loss of I{sub 2} during sintering in air for a SNL Glass Composite Material (GCM) Waste Form containing AgI-MOR (ORNL, 8.7 wt%) was determined to be 1.1 wt% Ag. The final GCM composition prior to sintering was 20 wt% AgI-MOR, 1.1 wt% Ag, and 80 wt% Bi-Si oxide glass. The amount of silver flake needed to suppress iodine loss was determined using thermo gravimetric analysis with mass spectroscopic off-gas analysis. These studies found that the ratio of silver to AgI-MOR required is lower in the presence of the glass than without it. Therefore an additional benefit of the GCM is that it serves to inhibit some iodine loss during processing. Alternatively, heating the AgI-MOR in inert atmosphere instead of air allowed for densified GCM formation without I{sub 2} loss, and no necessity for the addition of Ag. The cause of this behavior is found to be related to the oxidation of the metallic Ag to Ag{sup +} when heated to above ~300{degrees}C in air. Heating rate, iodine loading levels and atmosphere are the important variables that determine AgI migration and results suggest that AgI may be completely incorporated into the mordenite structure by the 550{degrees}C sintering temperature.

  6. Sub-Pixel Accuracy Crack Width Determination on Concrete Beams in Load Tests by Triangle Mesh Geometry Analysis

    Science.gov (United States)

    Liebold, F.; Maas, H.-G.

    2018-05-01

    This paper deals with the determination of crack widths of concrete beams during load tests from monocular image sequences. The procedure starts in a reference image of the probe with suitable surface texture under zero load, where a large number of points is defined by an interest operator. Then a triangulated irregular network is established to connect the points. Image sequences are recorded during load tests with the load increasing continuously or stepwise, or at intermittently changing load. The vertices of the triangles are tracked through the consecutive images of the sequence with sub-pixel accuracy by least squares matching. All triangles are then analyzed for changes by principal strain calculation. For each triangle showing significant strain, a crack width is computed by a thorough geometric analysis of the relative movement of the vertices.

  7. Determining the Frequency for Load-Independent Output Current in Three-Coil Wireless Power Transfer System

    Directory of Open Access Journals (Sweden)

    Longzhao Sun

    2015-09-01

    Full Text Available Conditions for load-independent output voltage or current in two-coil wireless power transfer (WPT systems have been studied. However, analysis of load-independent output current in three-coil WPT system is still lacking in previous studies. This paper investigates the output current characteristics of a three-coil WPT system against load variations, and determines the operating frequency to achieve a constant output current. First, a three-coil WPT system is modeled by circuit theory, and the analytical expression of the root-mean-square of the output current is derived. By substituting the coupling coefficients, the quality factor, and the resonant frequency of each coil, we propose a method of calculating the frequency for load-independent output current in a three-coil WPT system, which indicates that there are two frequencies that can achieve load-independent output current. Experiments are conducted to validate these analytical results.

  8. Determinants of Severity in Acute Pancreatitis: A Nation-wide Multicenter Prospective Cohort Study.

    Science.gov (United States)

    Sternby, Hanna; Bolado, Federico; Canaval-Zuleta, Héctor J; Marra-López, Carlos; Hernando-Alonso, Ana I; Del-Val-Antoñana, Adolfo; García-Rayado, Guillermo; Rivera-Irigoin, Robin; Grau-García, Francisco J; Oms, Lluís; Millastre-Bocos, Judith; Pascual-Moreno, Isabel; Martínez-Ares, David; Rodríguez-Oballe, Juan A; López-Serrano, Antonio; Ruiz-Rebollo, María L; Viejo-Almanzor, Alejandro; González-de-la-Higuera, Belén; Orive-Calzada, Aitor; Gómez-Anta, Ignacio; Pamies-Guilabert, José; Fernández-Gutiérrez-Del-Álamo, Fátima; Iranzo-González-Cruz, Isabel; Pérez-Muñante, Mónica E; Esteba, María D; Pardillos-Tomé, Ana; Zapater, Pedro; de-Madaria, Enrique

    2018-04-18

    The aim of this study was to compare and validate the different classifications of severity in acute pancreatitis (AP) and to investigate which characteristics of the disease are associated with worse outcomes. AP is a heterogeneous disease, ranging from uneventful cases to patients with considerable morbidity and high mortality rates. Severity classifications based on legitimate determinants of severity are important to correctly describe the course of disease. A prospective multicenter cohort study involving patients with AP from 23 hospitals in Spain. The Atlanta Classification (AC), Revised Atlanta Classification (RAC), and Determinant-based Classification (DBC) were compared. Binary logistic multivariate analysis was performed to investigate independent determinants of severity. A total of 1655 patients were included; 70 patients (4.2%) died. RAC and DBC were equally superior to AC for describing the clinical course of AP. Although any kind of organ failure was associated with increased morbidity and mortality, persistent organ failure (POF) was the most significant determinant of severity. All local complications were associated with worse outcomes. Infected pancreatic necrosis correlated with high morbidity, but in the presence of POF, it was not associated to higher mortality when compared with sterile necrotizing pancreatitis. Exacerbation of previous comorbidity was associated with increased morbidity and mortality. The RAC and DBC both signify an advance in the description and differentiation of AP patients. Herein, we describe the complications of the disease independently associated to morbidity and mortality. Our findings are valuable not only when designing future studies on AP but also for the improvement of current classifications.

  9. Thermal models of buildings. Determination of temperatures, heating and cooling loads. Theories, models and computer programs

    Energy Technology Data Exchange (ETDEWEB)

    Kaellblad, K

    1998-05-01

    The need to estimate indoor temperatures, heating or cooling load and energy requirements for buildings arises in many stages of a buildings life cycle, e.g. at the early layout stage, during the design of a building and for energy retrofitting planning. Other purposes are to meet the authorities requirements given in building codes. All these situations require good calculation methods. The main purpose of this report is to present the authors work with problems related to thermal models and calculation methods for determination of temperatures and heating or cooling loads in buildings. Thus the major part of the report deals with treatment of solar radiation in glazing systems, shading of solar and sky radiation and the computer program JULOTTA used to simulate the thermal behavior of rooms and buildings. Other parts of thermal models of buildings are more briefly discussed and included in order to give an overview of existing problems and available solutions. A brief presentation of how thermal models can be built up is also given and it is a hope that the report can be useful as an introduction to this part of building physics as well as during development of calculation methods and computer programs. The report may also serve as a help for the users of energy related programs. Independent of which method or program a user choose to work with it is his or her own responsibility to understand the limits of the tool, else wrong conclusions may be drawn from the results 52 refs, 22 figs, 4 tabs

  10. Chitosan nanoparticles as non-viral gene delivery systems: determination of loading efficiency.

    Science.gov (United States)

    Carrillo, Carolina; Suñé, Josep Maria; Pérez-Lozano, Pilar; García-Montoya, Encarna; Sarrate, Rocío; Fàbregas, Anna; Miñarro, Montserrat; Ticó, Josep Ramon

    2014-07-01

    Chitosan has been studied for use in particle delivery systems for therapeutic purposes, since one of its most important applications is as a non-viral vector in gene therapy. Due to its positive charge, it is capable of forming DNA complexes (polyplexes) obtained through several methods and with the property of protecting nucleic acids. Two methods for obtaining the nanoparticles of chitosan-nucleic acids are reported in this study: simple complexation (of depolymerized chitosan or of different chitosan salts with plasmid) and ionic gelation (by adsorption of plasmid in the nanoparticles or by encapsulation of plasmid into nanoparticles). The determination of the loading efficiency of chitosan nanoparticles with the plasmid is carried out by electrophoretic mobility of the samples on agarose gel. Furthermore, the nanoparticles have been characterized according to their morphology, size and surface charge using AFM, TEM, laser diffraction and dynamic light scattering techniques. The polyplexes obtained have been found to be spherical and nanometric in size (between 100-230nm) with a zeta potential between 37 and 48mV. Positive results have been obtained by agarose gel electrophoresis for all studied cases: a concentration of between 20 and 30μg/mL of chitosan salts is required while for the remaining chitosan samples studied, 100% loading efficiency does not occur until a concentration equal to 100μg/mL (regardless of previous depolymerisation and the method performed). Chitosan-plasmid nanocapsules have been obtained at the polymer concentrations worked with (between 0.025 and 0.2%). Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  11. Demonstration of sulfur solubility determinations in high waste loading, low-activity waste glasses

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-04-25

    A method recommended by Pacific Northwest National Laboratory (PNNL) for sulfate solubility determinations in simulated low-activity waste glasses was demonstrated using three compositions from a recent Hanford high waste loading glass study. Sodium and sulfate concentrations in the glasses increased after each re-melting step. Visual observations of the glasses during the re-melting process reflected the changes in composition. The measured compositions showed that the glasses met the targeted values. The amount of SO3 retained in the glasses after washing was relatively high, ranging from 1.6 to 2.6 weight percent (wt %). Measured SnO2 concentrations were notably low in all of the study glasses. The composition of the wash solutions should be measured in future work to determine whether SnO2 is present with the excess sulfate washed from the glass. Increases in batch size and the amount of sodium sulfate added did not have a measureable impact on the amount of sulfate retained in the glass, although this was tested for only a single glass composition. A batch size of 250 g and a sodium sulfate addition targeting 7 wt %, as recommended by PNNL, will be used in future experiments.

  12. Detection of anorectal and cervicovaginal Chlamydia trachomatis infections following azithromycin treatment: prospective cohort study with multiple time-sequential measures of rRNA, DNA, quantitative load and symptoms.

    Directory of Open Access Journals (Sweden)

    Nicole H T M Dukers-Muijrers

    Full Text Available Determination of Chlamydia trachomatis (Ct treatment success is hampered by current assessment methods, which involve a single post-treatment measurement only. Therefore, we evaluated Ct detection by applying multiple laboratory measures on time-sequential post-treatment samples.A prospective cohort study was established with azithromycin-treated (1000 mg Ct patients (44 cervicovaginal and 15 anorectal cases. Each patient provided 18 self-taken samples pre-treatment and for 8 weeks post-treatment (response: 96%; 1,016 samples. Samples were tested for 16S rRNA (TMA, bacterial load (quantitative PCR; Chlamydia plasmid DNA and type (serovar and multilocus sequence typing. Covariates (including behavior, pre-treatment load, anatomic site, symptoms, age, and menstruation were tested for their potential association with positivity and load at 3-8 weeks using regression analyses controlling for repeated measures.By day 9, Ct positivity decreased to 20% and the median load to 0.3 inclusion-forming units (IFU per ml (pre-treatment: 170 IFU/ml. Of the 35 cases who reported no sex, sex with a treated partner or safe sex with a new partner, 40% had detection, i.e. one or more positive samples from 3-8 weeks (same Ct type over time, indicating possible antimicrobial treatment failure. Cases showed intermittent positive detection and the number of positive samples was higher in anorectal cases than in cervicovaginal cases. The highest observed bacterial load between 3-8 weeks post-treatment was 313 IFU/ml, yet the majority (65% of positive samples showed a load of ≤ 2 IFU/ml. Pre-treatment load was found to be associated with later load in anorectal cases.A single test at 3-8 weeks post-treatment frequently misses Ct. Detection reveals intermittent low loads, with an unknown risk of later complications or transmission. These findings warrant critical re-evaluation of the clinical management of single dose azithromycin-treated Ct patients and fuel the debate

  13. 40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... adjusted loaded vehicle weight, as defined in § 86.094-2 or 86.1803-01 as applicable. For all other vehicles, test weight basis shall be loaded vehicle weight, as defined in § 86.082-2 or 86.1803-01 as... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Road load power, test weight, and...

  14. Soil Iodine Determination in Deccan Syneclise, India: Implications for Near Surface Geochemical Hydrocarbon Prospecting

    International Nuclear Information System (INIS)

    Mani, Devleena; Kumar, T. Satish; Rasheed, M. A.; Patil, D. J.; Dayal, A. M.; Rao, T. Gnaneshwar; Balaram, V.

    2011-01-01

    The association of iodine with organic matter in sedimentary basins is well documented. High iodine concentration in soils overlying oil and gas fields and areas with hydrocarbon microseepage has been observed and used as a geochemical exploratory tool for hydrocarbons in a few studies. In this study, we measure iodine concentration in soil samples collected from parts of Deccan Syneclise in the west central India to investigate its potential application as a geochemical indicator for hydrocarbons. The Deccan Syneclise consists of rifted depositional sites with Gondwana–Mesozoic sediments up to 3.5 km concealed under the Deccan Traps and is considered prospective for hydrocarbons. The concentration of iodine in soil samples is determined using ICP-MS and the values range between 1.1 and 19.3 ppm. High iodine values are characteristic of the northern part of the sampled region. The total organic carbon (TOC) content of the soil samples range between 0.1 and 1.3%. The TOC correlates poorly with the soil iodine (r 2 < 1), indicating a lack of association of iodine with the surficial organic matter and the possibility of interaction between the seeping hydrocarbons and soil iodine. Further, the distribution pattern of iodine compares well with two surface geochemical indicators: the adsorbed light gaseous hydrocarbons (methane through butane) and the propane-oxidizing bacterial populations in the soil. The integration of geochemical observations show the occurrence of elevated values in the northern part of the study area, which is also coincident with the presence of exposed dyke swarms that probably serve as conduits for hydrocarbon microseepage. The corroboration of iodine with existing geological, geophysical, and geochemical data suggests its efficacy as one of the potential tool in surface geochemical exploration of hydrocarbons. Our study supports Deccan Syneclise to be promising in terms of its hydrocarbon prospects.

  15. Someone to count on: social support as an effect modifier of viral load suppression in a prospective cohort study.

    Science.gov (United States)

    Friedman, M Reuel; Coulter, Robert W S; Silvestre, Anthony J; Stall, Ron; Teplin, Linda; Shoptaw, Steve; Surkan, Pamela J; Plankey, Michael W

    2017-04-01

    Though functional social support has been shown to serve as a protective factor for HIV viral load suppression in other populations, scant research has examined this relationship among men who have sex with men (MSM) in the United States. We assessed characteristics of social support, effects of social support on HIV viral load, and moderation by social support of the relationship between psychosocial indicators of a synergistic epidemic (syndemic) and HIV viral load. We analyzed longitudinal data from HIV-positive MSM using antiretroviral therapy who were enrolled in the Multicenter AIDS Cohort Study between 2002 and 2009 (n = 712). First, we conducted reliability assessments of a one-item social support measure. Then, we conducted a series of generalized longitudinal mixed models to assess our research questions. Moderation was assessed using an interaction term. A three-level (low/medium/high) social support variable demonstrated high reliability (intraclass correlation coefficients  = 0.72; 95% CI: 0.70, 0.75). Black and Hispanic MSM reported lower social support than their White counterparts (p social support (p social support (p social support levels were associated with greater viral load suppression and lower viral load means (p Social support moderated the relationships between syndemic and HIV viral load (p social support. Creating strengths-based interventions may also have particularly high impact among HIV-positive MSM with the highest psychosocial burdens.

  16. Prospects for Edge Current Density Determination Using LIBEAM on DIII-D

    International Nuclear Information System (INIS)

    D.M. Thomas; A.S. Bozek; T.N. Carlstrom; D.K. Finkenthal; R. Jayakumar; M.A. Makowski; D.G. Nilson; T.H. Osborne; B.W. Rice; R.T. Snider

    2000-01-01

    The specific size and structure of the edge current profile has important effects on the MHD stability and ultimate performance of many advanced tokamak (AT) operating modes. This is true for both bootstrap and externally driven currents that may be used to tailor the edge shear. Absent a direct local measurement of j(r), the best alternative is a determination of the poloidal field. Measurements of the precision (0.1-0.01 o in magnetic pitch angle and 1-10 ms) necessary to address issues of stability and control and provide constraints for EFIT are difficult to do in the region of interest (ρ = 0.9-1.1). Using Zeeman polarization spectroscopy of the 2S-2P lithium resonance line emission from the DIII-D LIBEAM, measurements of the various field components may be made to the necessary precision in exactly the region of interest to these studies. Because of the negligible Stark mixing of the relevant atomic levels, this method of determining j(r) is insensitive to the large local electric fields typically found in enhanced confinement (H-mode) edges, and thus avoids an ambiguity common to Motional Stark Effect (MSE) measurements of B. Key issues for utilizing this technique include good beam quality, an optimum viewing geometry, and a suitable optical pre-filter to isolate the polarized emission line. A prospective diagnostic system for the DIII-D AT program will be described

  17. Experimental determination of the energy efficiency of an air-cooled chiller under part load conditions

    International Nuclear Information System (INIS)

    Yu, F.W.; Chan, K.T.

    2005-01-01

    In cities located in a subtropical climate, air-cooled chillers are commonly used to provide cooling to the indoor environment. This accounts for the increasing electricity demand of buildings over the decades. This paper investigates how the condensing temperature serves to accurately determine the energy efficiency, or coefficient of performance (COP), of air-cooled chillers under part load conditions. An experiment on an air-cooled reciprocating chiller showed that for any given operating condition, the COP of the chiller varies, depending on how the condensing temperature is controlled. A sensitivity analysis is implemented to investigate to what extent COP is responding to changes in operating variables and confirms that the condensing temperature is an adequate variable to gauge COP under various operating conditions. The specifications of the upper limit for the condensing temperature in order to improve the energy efficiency of air-cooled chillers are discussed. The results of this work will give designers and researchers a good idea about how to model chiller energy performance curves in the thermal and energy computation exercises

  18. Capillary electrophoresis to determine entrapment efficiency of a nanostructured lipid carrier loaded with piroxicam

    Directory of Open Access Journals (Sweden)

    Jessica Otarola

    2015-02-01

    Full Text Available A simple and fast capillary electrophoresis method has been developed to determine the amount of piroxicam loaded in a drug delivery system based on nanostructured lipid carriers (NLCs. The entrapment efficiency of the nanostructured lipid carrier was estimated by measuring the concentration of drug not entrapped in a suspension of NLC. The influence of different parameters on migration times, peak symmetry, efficiency and resolution was studied; these parameters included the pH of the electrophoretic buffer solution and the applied voltage. The piroxicam peak was obtained with a satisfactory resolution. The separation was carried out using a running buffer composed of 50 mM ammonium acetate and 13.75 mM ammonia at pH 9. The optimal voltage was 20 kV and the cartridge temperature was 20 °C. The corresponding calibration curve was linear over the range of 2.7–5.4 µg/mL of NLC suspension. The reproducibility of migration time and peak area were investigated, and the obtained RSD% values (n=5 were 0.99 and 2.13, respectively. Keywords: Capillary electrophoresis, Drug delivery system, Nanostructured lipid carrier, Piroxicam

  19. Determining loads acting on the pelvis in upright and recumbent birthing positions: A case study.

    Science.gov (United States)

    Hemmerich, Andrea; Geens, Emily; Diesbourg, Tara; Dumas, Geneviève A

    2018-05-24

    The biomechanics of mothers' birthing positions and their impact on maternal and newborn health outcomes are poorly understood. Our objectives were to determine the loads applied to the female pelvis during dynamic movement that may occur during childbirth; findings are intended to inform clinical understanding and further research on birth positioning mechanics. An optical motion capture system and force platforms were used to collect upright and supine movement data from two pregnant and three non-pregnant participants. Using an inverse dynamics approach, normalized three-dimensional hip and sagittal plane lumbosacral joint moments were estimated during squatting, all-fours, and supine activities. During squatting, peak hip abduction moments were greater for our pregnant (compared with non-pregnant) participants and lumbosacral extension moments substantially exceeded those during walking. The all-fours activity, conversely, generated flexion moments at the L5/S1 joint throughout most of the cycle. In supine, the magnitude of the ground reaction force reached 100% body weight with legs and upper body raised (McRoberts' position); the centre of pressure remained cranial to the sacrum. Squatting generated appreciable moments at the hip and lumbosacral joints that could potentially affect pelvic motion during childbirth. Copyright © 2018 Elsevier Ltd. All rights reserved.

  20. Determination of the neutral oxygen atom density in a plasma reactor loaded with metal samples

    Science.gov (United States)

    Mozetic, Miran; Cvelbar, Uros

    2009-08-01

    The density of neutral oxygen atoms was determined during processing of metal samples in a plasma reactor. The reactor was a Pyrex tube with an inner diameter of 11 cm and a length of 30 cm. Plasma was created by an inductively coupled radiofrequency generator operating at a frequency of 27.12 MHz and output power up to 500 W. The O density was measured at the edge of the glass tube with a copper fiber optics catalytic probe. The O atom density in the empty tube depended on pressure and was between 4 and 7 × 1021 m-3. The maximum O density was at a pressure of about 150 Pa, while the dissociation fraction of O2 molecules was maximal at the lowest pressure and decreased with increasing pressure. At about 300 Pa it dropped below 10%. The measurements were repeated in the chamber loaded with different metallic samples. In these cases, the density of oxygen atoms was lower than that in the empty chamber. The results were explained by a drain of O atoms caused by heterogeneous recombination on the samples.

  1. Determining the optimal load for jump squats: a review of methods and calculations.

    Science.gov (United States)

    Dugan, Eric L; Doyle, Tim L A; Humphries, Brendan; Hasson, Christopher J; Newton, Robert U

    2004-08-01

    There has been an increasing volume of research focused on the load that elicits maximum power output during jump squats. Because of a lack of standardization for data collection and analysis protocols, results of much of this research are contradictory. The purpose of this paper is to examine why differing methods of data collection and analysis can lead to conflicting results for maximum power and associated optimal load. Six topics relevant to measurement and reporting of maximum power and optimal load are addressed: (a) data collection equipment, (b) inclusion or exclusion of body weight force in calculations of power, (c) free weight versus Smith machine jump squats, (d) reporting of average versus peak power, (e) reporting of load intensity, and (f) instructions given to athletes/ participants. Based on this information, a standardized protocol for data collection and reporting of jump squat power and optimal load is presented.

  2. Immediate Loading of Single Implants in the Anterior Maxilla: A 1-Year Prospective Clinical Study on 34 Patients

    Directory of Open Access Journals (Sweden)

    Miguel Stanley

    2017-01-01

    Full Text Available Purpose. To present the outcomes of immediately loaded single implants placed in the anterior maxilla. Methods. Over a 2-year period, all patients referred to a private clinic were considered for enrolment in this study. Inclusion criteria were single-tooth placement in postextraction sockets or healed sites of the anterior maxilla. All implants were immediately loaded and followed for a period of 1 year after the placement of definitive crowns. The outcome measures were implant stability, survival, and success. Results. 34 patients were selected and 43 tapered implants with a knife-edge thread design and a nanostructured, calcium-incorporated surface (Anyridge®, Megagen, Gyeongsang, Korea were installed. Two implants were not sufficiently stable at placement (ISQ < 60 and were considered failed for immediate loading; 41 implants had an ISQ ≥ 60 at placement and were immediately loaded. One year after the placement of definitive crowns, no implant failures were reported, for a survival rate of 100%. No biological complications were found, but 2 implants had their prosthetic abutments loosened: the implant success rate was 95.2%. Conclusions. In the present study on the immediate loading of single implants in the anterior maxilla, positive outcomes were reported, with high survival (100% and success (95.2% rates (the present study has been registered in the ISRCTN registry, a publicly available trial register recognized by WHO and ICMJE, with number ISRCTN12935478.

  3. Load transfer in bovine plexiform bone determined by synchrotron x-ray diffraction

    International Nuclear Information System (INIS)

    Akhtar, R.; Daymond, M.; Almer, J.; Mummery, P.; The Univ. of Manchester; Queen's Univ.

    2008-01-01

    High-energy synchrotron x-ray diffraction (XRD) has been used to quantify load transfer in bovine plexiform bone. By using both wide-angle and small-angle XRD, strains in the mineral as well as the collagen phase of bone were measured as a function of applied compressive stress. We suggest that a greater proportion of the load is borne by the more mineralized woven bone than the lamellar bone as the applied stress increases. With a further increase in stress, load is shed back to the lamellar regions until macroscopic failure occurs. The reported data fit well with reported mechanisms of microdamage accumulation in bovine plexiform bone

  4. A simple surrogate test method to rank the wear performance of prospective ceramic materials under hip prosthesis edge-loading conditions.

    Science.gov (United States)

    Sanders, Anthony P; Brannon, Rebecca M

    2014-02-01

    This research has developed a novel test method for evaluating the wear resistance of ceramic materials under severe contact stresses simulating edge loading in prosthetic hip bearings. Simply shaped test specimens - a cylinder and a spheroid - were designed as surrogates for an edge-loaded, head/liner implant pair. Equivalency of the simpler specimens was assured in the sense that their theoretical contact dimensions and pressures were identical, according to Hertzian contact theory, to those of the head/liner pair. The surrogates were fabricated in three ceramic materials: Al2 O3 , zirconia-toughened alumina (ZTA), and ZrO2 . They were mated in three different material pairs and reciprocated under a 200 N normal contact force for 1000-2000 cycles, which created small (material pairs were ranked by their wear resistance, quantified by the volume of abraded material measured using an interferometer. Similar tests were performed on edge-loaded hip implants in the same material pairs. The surrogates replicated the wear rankings of their full-scale implant counterparts and mimicked their friction force trends. The results show that a proxy test using simple test specimens can validly rank the wear performance of ceramic materials under severe, edge-loading contact stresses, while replicating the beginning stage of edge-loading wear. This simple wear test is therefore potentially useful for screening and ranking new, prospective materials early in their development, to produce optimized candidates for more complicated full-scale hip simulator wear tests. Copyright © 2013 Wiley Periodicals, Inc.

  5. Relationships Between Results Of An Internal And External Match Load Determining Method In Male, Singles Badminton Players.

    Science.gov (United States)

    Abdullahi, Yahaya; Coetzee, Ben; Van den Berg, Linda

    2017-07-03

    The study purpose was to determine relationships between results of internal and external match load determining methods. Twenty-one players, who participated in selected badminton championships during the 2014/2015 season served as subjects. The heart rate (HR) values and GPS data of each player were obtained via a fix Polar HR Transmitter Belt and MinimaxX GPS device. Moderate significant Spearman's rank correlations were found between HR and absolute duration (r = 0.43 at a low intensity (LI) and 0.44 at a high intensity (HI)), distance covered (r = 0.42 at a HI) and player load (PL) (r = 0.44 at a HI). Results also revealed an opposite trend for external and internal measures of load as the average relative HR value was found to be the highest for the HI zone (54.1%) compared to the relative measures of external load where average values (1.29-9.89%) were the lowest for the HI zone. In conclusion, our findings show that results of an internal and external badminton match load determining method are more related to each other in the HI zone than other zones and that the strength of relationships depend on the duration of activities that are performed in especially LI and HI zones. Overall, trivial to moderate relationships between results of an internal and external match load determining method in male, singles badminton players reaffirm the conclusions of others that these constructs measure distinctly different demands and should therefore be measured concurrently to fully understand the true requirements of badminton match play.

  6. a model for the determination of the critical buckling load of self

    African Journals Online (AJOL)

    HP

    Considering the widespread use of this type of structure and the critical role it ... proposed by the model for the critical buckling load of self- supporting lattice tower, whose equivalent solid beam- ... stiffness, both material and geometric, [5, 6].

  7. The Spatial Release of Cognitive Load in Cocktail Party Is Determined by the Relative Levels of the Talkers.

    Science.gov (United States)

    Andéol, Guillaume; Suied, Clara; Scannella, Sébastien; Dehais, Frédéric

    2017-06-01

    In a multi-talker situation, spatial separation between talkers reduces cognitive processing load: this is the "spatial release of cognitive load". The present study investigated the role played by the relative levels of the talkers on this spatial release of cognitive load. During the experiment, participants had to report the speech emitted by a target talker in the presence of a concurrent masker talker. The spatial separation (0° and 120° angular distance in azimuth) and the relative levels of the talkers (adverse, intermediate, and favorable target-to-masker ratio) were manipulated. The cognitive load was assessed with a prefrontal functional near-infrared spectroscopy. Data from 14 young normal-hearing listeners revealed that the target-to-masker ratio had a direct impact on the spatial release of cognitive load. Spatial separation significantly reduced the prefrontal activity only for the intermediate target-to-masker ratio and had no effect on prefrontal activity for the favorable and the adverse target-to-masker ratios. Therefore, the relative levels of the talkers might be a key point to determine the spatial release of cognitive load and more specifically the prefrontal activity induced by spatial cues in multi-talker situations.

  8. Clinical outcomes of immediate/early loading of dental implants. A literature review of recent controlled prospective clinical studies.

    Science.gov (United States)

    Sennerby, L; Gottlow, J

    2008-06-01

    Two previous reviews have evaluated the clinical outcomes of immediate/early loading of dental implants based on studies published until 2005.(1,2) The aim of the present paper was to review controlled clinical studies on the subject published since 2005 including at least 10 patients in each group followed for at least one year in function. Six comparative studies were found and none of these showed any differences in survival rates or marginal bone loss after one to five years. Most authors used specified inclusion criteria to avoid known risk factors such as soft bone, short implants and bruxism. Data from one randomized study in the edentulous maxilla showed no differences between early and delayed loading in consecutive clinical routine cases including short implants and soft bone. Three additional studies comparing different surfaces or implant designs under immediate loading were reviewed. No differences between implants with a moderately rough or smooth surface topography were observed. The data add to the previous bulk of evidence that various designs of implants can be loaded shortly after their placement in both the mandible and the maxilla. However, one study reported on marginal bone loss around a novel one-piece implant design leading to implant failure which was not seen for control two-piece implants.(3).

  9. Immediate occlusal loading of Osseotite implants in mandibular edentulous patients: a prospective observational report with 18-month data.

    Science.gov (United States)

    Drago, Carl J; Lazzara, Richard J

    2006-01-01

    To evaluate the efficacy of treatment consisting of placement and immediate occlusal loading of implants in 27 patients with edentulous mandibles. Twenty-seven patients were treated in two private practice settings. One hundred fifty-one implants were placed and immediately occlusally loaded with fixed implant prostheses (15 cement-retained, 12 screw-retained) on the day of implant placement. The implant-retained prostheses were inserted within 5 hours of implant placement. Patients were followed for at least 18 months. The required criteria for immediate occlusal loading was primary implant stability of at least 30 Ncm of insertion torque. The implant prostheses were removed at least 12 months post-placement and the implants were evaluated for primary clinical stability and radiographic bone apposition to implants. At the 12-month follow-up appointments, cumulative survival rates of 98.0% and 100% were recorded for implants and prostheses, respectively. Three implants failed within 3 months. All other implants were clinically successful. Immediate occlusal loading of multiple, splinted mandibular implants is an effective treatment when implants are stable at insertion and are rigidly splinted with implant-retained prostheses.

  10. Investigation of Load Prediction on the Mexico Rotor Using the Technique of Determination of the Angle of Attack

    DEFF Research Database (Denmark)

    Yang, Hua; Shen, Wen Zhong; Sørensen, Jens Nørkær

    2012-01-01

    Blade element moment (BEM) is a widely used technique for prediction of wind turbine aerodynamics performance, the reliability of airfoil data is an important factor to improve the prediction accuracy of aerodynamic loads and power using a BEM code. The method of determination of angle of attack ...

  11. Prospective study of determinants and costs of home births in Mumbai slums

    Directory of Open Access Journals (Sweden)

    Das Sushmita

    2010-07-01

    Full Text Available Abstract Background Around 86% of births in Mumbai, India, occur in healthcare institutions, but this aggregate figure hides substantial variation and little is known about urban home births. We aimed to explore factors influencing the choice of home delivery, care practices and costs, and to identify characteristics of women, households and the environment which might increase the likelihood of home birth. Methods As part of the City Initiative for Newborn Health, we used a key informant surveillance system to identify births prospectively in 48 slum communities in six wards of Mumbai, covering a population of 280 000. Births and outcomes were documented prospectively by local women and mothers were interviewed in detail at six weeks after delivery. We examined the prevalence of home births and their associations with potential determinants using regression models. Results We described 1708 (16% home deliveries among 10 754 births over two years, 2005-2007. The proportion varied from 6% to 24%, depending on area. The most commonly cited reasons for home birth were custom and lack of time to reach a healthcare facility during labour. Seventy percent of home deliveries were assisted by a traditional birth attendant (dai, and 6% by skilled health personnel. The median cost of a home delivery was US$ 21, of institutional delivery in the public sector US$ 32, and in the private sector US$ 118. In an adjusted multivariable regression model, the odds of home delivery increased with illiteracy, parity, socioeconomic poverty, poorer housing, lack of water supply, population transience, and hazardous location. Conclusions We estimate 32 000 annual home births to residents of Mumbai's slums. These are unevenly distributed and cluster with other markers of vulnerability. Since cost does not appear to be a dominant disincentive to institutional delivery, efforts are needed to improve the client experience at public sector institutions. It might also be

  12. Prospective study of determinants and costs of home births in Mumbai slums.

    Science.gov (United States)

    Das, Sushmita; Bapat, Ujwala; More, Neena Shah; Chordhekar, Latika; Joshi, Wasundhara; Osrin, David

    2010-07-30

    Around 86% of births in Mumbai, India, occur in healthcare institutions, but this aggregate figure hides substantial variation and little is known about urban home births. We aimed to explore factors influencing the choice of home delivery, care practices and costs, and to identify characteristics of women, households and the environment which might increase the likelihood of home birth. As part of the City Initiative for Newborn Health, we used a key informant surveillance system to identify births prospectively in 48 slum communities in six wards of Mumbai, covering a population of 280,000. Births and outcomes were documented prospectively by local women and mothers were interviewed in detail at six weeks after delivery. We examined the prevalence of home births and their associations with potential determinants using regression models. We described 1708 (16%) home deliveries among 10,754 births over two years, 2005-2007. The proportion varied from 6% to 24%, depending on area. The most commonly cited reasons for home birth were custom and lack of time to reach a healthcare facility during labour. Seventy percent of home deliveries were assisted by a traditional birth attendant (dai), and 6% by skilled health personnel. The median cost of a home delivery was US$ 21, of institutional delivery in the public sector US$ 32, and in the private sector US$ 118. In an adjusted multivariable regression model, the odds of home delivery increased with illiteracy, parity, socioeconomic poverty, poorer housing, lack of water supply, population transience, and hazardous location. We estimate 32,000 annual home births to residents of Mumbai's slums. These are unevenly distributed and cluster with other markers of vulnerability. Since cost does not appear to be a dominant disincentive to institutional delivery, efforts are needed to improve the client experience at public sector institutions. It might also be productive to concentrate on intensive outreach in vulnerable areas by

  13. Determinants of Health Behaviors After Gestational Diabetes Mellitus: A Prospective Cohort Study in Geneva.

    Science.gov (United States)

    Kaiser, Barbara; Jeannot, Emilien; Razurel, Chantal

    2016-09-01

    Gestational diabetes mellitus (GDM) is one of the most common complications in pregnancy. The objective of this study was to specify the determinants of postpartum physical activity and dietary habits after a pregnancy complicated by GDM in a population of Swiss women. This information will be used to improve health promotion and diabetes prevention interventions for women with a history of GDM. A prospective cohort study of 173 pregnant women with a diagnosis of GDM was carried out. Quantitative data were collected at the end of pregnancy (T1) and at 6 months postpartum (T3). Bivariate and multivariate logistic regression analysis was conducted to assess associations between the level of healthy lifestyle at 6 months postpartum, clinical and sociodemographic characteristics, motivation to adopt a healthy lifestyle after birth at the end of pregnancy, and postulated psychosocial correlates of health behaviors. Multivariate regression analysis showed that only 2 variables were determinants in a low adherence to healthy lifestyle in the postpartum period after GDM: a lower level of social support (odds ratio [OR], 1.5; P healthy lifestyle (OR, 1.2; P = .002). This study shows that, for women who had GDM, the problem of low adherence to a healthy lifestyle to prevent the onset of type 2 diabetes may be secondary to the lack of resources available for the promotion and development of healthy eating habits and regular physical activity. The findings of this study suggest that some women with a history of GDM do not have the means and resources in the postpartum period to apply the advice given during antenatal monitoring. © 2016 by the American College of Nurse-Midwives.

  14. Prospective study on determinants of repeat attendance and attendance patterns in breast cancer screening using the Theory of Planned Behaviour.

    NARCIS (Netherlands)

    Drossaert, Constance H.C.; Boer, Hendrik; Seydel, E.R.

    2003-01-01

    This prospective study, using the Theory of Planned Behaviour (TPB) as a theoretical framework, was carried out to identify the determinants of repeat attendance and attendance patterns in organised breast screening. A group of 2657 women filled out a baseline questionnaire, approximately 8 weeks

  15. Model for determining the load or carrying capacity of rivers and riverbanks for recreational use

    Directory of Open Access Journals (Sweden)

    Otero, I.

    2015-12-01

    Full Text Available The aim of this article is to determine the load or functional carrying capacity for the assimilation and recovery of rivers and riverbanks by compiling information on the environment, and to assess the potential for recreation from the environmental and scenic point of view. We set out to find the most significant basis for analysing the pressures limiting carrying capacity and constraining the demand for recreational use. This methodology will help planners and legislators in their decision-making. We also propose a methodology for assessing the recreational use of riverbanks, tested in a number of sites in the Madrid Region, in terms of the satisfaction the activity produces in the users, and the load or carrying capacity of the surrounding environment. A pilot site assessment is presented as a validation of the proposed methodology.El objetivo de este artículo es, determinar la capacidad de carga o acogida funcional, de asimilación y de recuperación de los márgenes y los cursos fluviales mediante la recopilación de información del medio; el potencial recreativo se evalúa además desde un doble punto de vista: ecológico y paisajístico. La forma en que se enfoca el problema y se presenta la metodología y los resultados puede resultar de gran utilidad para planificadores y legisladores. La metodología propuesta para valorar el uso recreativo de los márgenes fluviales, se aplica a una serie de parcelas en la Comunidad de Madrid, teniendo en cuenta la satisfacción que la actividad produce en los usuarios, y la capacidad de carga o acogida del entorno en el que se desarrollan. Como resultado, se presenta la valoración de parcelas piloto, que servirían para validar la metodología propuesta. [fr] Le but de cet article est, déterminer la capacité de charge ou réception fonctionnelle, l’assimilation et rétablissement des marges et les cours de la rivière par le biais de la collecte d’informations de l’environnement: le

  16. Determining the economic cost of ICU treatment: a prospective "micro-costing" study.

    LENUS (Irish Health Repository)

    McLaughlin, Anne Marie

    2009-12-01

    To prospectively assess the cost of patients in an adult intensive care unit (ICU) using bottom-up costing methodology and evaluate the usefulness of "severity of illness" scores in estimating ICU cost.

  17. Factors determining social participation in the first year after kidney transplantation : A prospective study

    NARCIS (Netherlands)

    van der Mei, Siirike F.; van Son, Willem J.; van Sonderen, Eric L. P.; de Jong, Paul E.; Groothoff, Johan W.; van den Heuvel, Wim J. A.

    2007-01-01

    Background. This study describes changes in social participation in the first year after kidney transplantation and examines the influence of clinical factors, health status, transplantation-related symptoms, and psychological characteristics on change in social participation. Methods. A prospective

  18. Prospects of Appliance-Level Load Monitoring in Off-the-Shelf Energy Monitors: A Technical Review

    Directory of Open Access Journals (Sweden)

    Anwar Ul Haq

    2018-01-01

    Full Text Available The smart grid initiative has encouraged utility companies worldwide to roll-out new and smarter versions of energy meters. Before an extensive roll-out, which is both labor-intensive and incurs high capital costs, consumers need to be incentivised to reap the long-term benefits of such smart meters. Off-the-shelf energy monitors (e-monitors can provide consumers with an insight into such potential benefits. As e-monitors are owned by the consumer, the consumer has greater control over the data, which significantly reduces the privacy and data confidentiality concerns. Because only limited online technical information is available about e-monitors, we evaluate several existing e-monitors using an online technical survey directly from the vendors. Besides automated e-monitoring, the use of different off-the-shelf e-monitors can also help to demonstrate state-of-the-art techniques such as non-intrusive load monitoring (NILM, data analytics, and the predictive maintenance of appliances. Our survey indicates a trend towards the incorporation of such state-of-the-art capabilities, particularly the appliance-level e-monitoring and load disaggregation. We have also discussed some essential requirements to implement load disaggregation in the next generation e-monitors. In future, these intelligent e-monitoring techniques will encourage effective consumer participation in the demand-side management (DSM programs.

  19. Determination of babbit mechanical properties based on tin under static and cyclic loading

    Science.gov (United States)

    Zernin, M. V.

    2018-03-01

    Based on the results of studies of babbitt on the basis of tin under static loading under three types of stress state, the parameters of the criterion for the equivalence of stressed states were refined and a single diagram of the babbitt deformation was obtained. It is shown that the criterion of equivalence for static loading should contain the first principal stress and stress intensity. With cyclic loading, the first main voltage can be used as a criterion. The stages of development of fatigue cracks are described and it is logical to use a statistical approach to reveal the boundary of the transition from short cracks to macrocracks, based on a significant difference in the characteristics of the dispersion of the crack speeds at these two stages. The results of experimental studies of the cyclic crack resistance of babbitt are presented and the parameters of this boundary are obtained.

  20. Survival rates and bone loss after immediate loading of implants in fresh extraction sockets (single gaps). A clinical prospective study with 4 year follow-up

    Science.gov (United States)

    Wojtovicz, Eduardo; España-Lopez, Antonio; Jimenez-Guerra, Alvaro; Monsalve-Guil, Loreto; Ortiz-Garcia, Ivan; Serrera-Figallo, Maria-Angeles

    2018-01-01

    Background The aim of this prospective study was to report the outcome of treatment with implants inserted after tooth extraction and immediately loaded. Material and Methods Fifty-six patients with single tooth loss were treated with 116 IPX Galimplant® implants with internal connections and a sandblasted, acid-etched surface. All implants were placed after tooth extraction using a flapless approach without bone regeneration, and they were then immediately loaded with cemented acrylic prostheses. After a period of three months, definitive cemented ceramic prostheses were placed. Patients were examined throughout a total of 4 years of follow-up. Marginal bone loss and survival rates were evaluated using digital periapical radiographs, taking into account clinical variables such as age, gender, smoking, history of periodontitis, etiology of extraction, placement site, diameter, and implant length. The Mann-Whitney U and Kruskal-Wallis non-parametric tests were used to compare differences between subgroups created based on the different clinical variables identified. Results Clinical results indicate an implant survival and success rate of 97.4%. Three implants were lost. Of the 116 immediate acrylic single crowns initially placed, 113 were replaced with definitive ceramic crowns after 3 months. A total of 77.8% of implants were inserted in the maxilla, while 22.2% were inserted in the mandible. No further complications were reported after the follow-up period (4 years). The mean marginal bone loss was 0.67 mm ± 0.40 mm. No differences were found among the subgroups of study patients. Conclusions This study indicates that dental implants that are inserted after tooth extraction and immediately loaded may constitute a successful and predictable alternative implant treatment. Key words:Dental implants, post-extraction implants, fresh sockets, immediate loading, immediate prostheses, implant dentistry. PMID:29476669

  1. Determination and Distribution of Critical Loads: Application to the Forest Soils in the Autonomous Region of Madrid

    International Nuclear Information System (INIS)

    Sousa, M.; Schmid, T.; Rabago, I.

    2000-01-01

    The critical loads of acidity and sulphur have been determined for forest soils within the north and northwest of the Autonomous Region of Madrid. The SMB-CCE and SMB-PROFILE steady state models have been applied using a 1 km x 1 km resolution. The forest ecosystems have been characterised according to the soil and forest type, slope and climatic data using a Geographic Information System. In order to estimate the critical loads, processes such as weathering rate of the parent material, atmospheric deposition. critical alkalinity leaching rate and nutrients absorbed by the vegetation have been considered. In general the forest soils present high critical load values for acidity and sulphur. The more sensitive zones are found in the north of the Sierra of Guadarrama. Independent of the applied methods, the results are associated to the types of soils where Leptosols have the lowest, Cambisoles and Regosoles intermediate and Luvisoles the most elevated values. (Author) 40 refs

  2. Determinants of facility delivery after implementation of safer mother programme in Nepal: a prospective cohort study.

    Science.gov (United States)

    Karkee, Rajendra; Binns, Colin W; Lee, Andy H

    2013-10-20

    There are several barriers for pregnant women to deliver in a health care facility. This prospective cohort study investigated factors affecting facility delivery and reasons for unplanned place of delivery after implementation of the safer mother programme in Nepal. Baseline interviews using a validated questionnaire were conducted on a sample of 700 pregnant women representative of the Kaski district in central Nepal. Follow-up interviews of the cohort were then conducted within 45 days postpartum. Stepwise logistic regression analysis was performed to determine factors associated with the facility delivery outcome. Of the 644 pregnant women whose delivery location had been identified, 547 (85%) gave birth in a health care facility. Women were more likely to deliver in a health facility if they were educated especially with higher secondary or above qualification (adjusted odds ratio (OR) 12.39, 95% confidence interval (CI) 5.09 to 30.17), attended 4 or more antenatal care visits (OR 2.15, 95% CI 1.25 to 3.69), and lived within 30 minutes to the facility (OR 11.61, 95% CI 5.77 to 24.04). For the 97 women who delivered at home, 72 (74.2%) were unplanned, mainly due to quick precipitation of labour making it impossible to reach a health facility. It appeared that facility delivery occurs more frequent among educated women and those who live nearby, even though maternity services are now freely available in Nepal. Because of the difficult terrain and transportation problem in rural areas, interventions that make maternity service physically accessible during antenatal period are needed to increase the utilisation of health facility for child birth.

  3. Scaling Issues in the Determination of Wind loads on Lattice Masts

    DEFF Research Database (Denmark)

    Koss, Holger; Srouji, Robin G.

    2015-01-01

    The paper presents a study conducted to investigate the influence of geometric scale and flow condition on the wind load coefficients for lattice masts structures. An initial study in 2008 on a full size mast section indicated a possible contingency, which could be used to add equipment on teleco......The paper presents a study conducted to investigate the influence of geometric scale and flow condition on the wind load coefficients for lattice masts structures. An initial study in 2008 on a full size mast section indicated a possible contingency, which could be used to add equipment...

  4. Subject-specific computer simulation model for determining elbow loading in one-handed tennis backhand groundstrokes.

    Science.gov (United States)

    King, Mark A; Glynn, Jonathan A; Mitchell, Sean R

    2011-11-01

    A subject-specific angle-driven computer model of a tennis player, combined with a forward dynamics, equipment-specific computer model of tennis ball-racket impacts, was developed to determine the effect of ball-racket impacts on loading at the elbow for one-handed backhand groundstrokes. Matching subject-specific computer simulations of a typical topspin/slice one-handed backhand groundstroke performed by an elite tennis player were done with root mean square differences between performance and matching simulations of elbow loading for a topspin and slice one-handed backhand groundstroke is relatively small. In this study, the relatively small differences in elbow loading may be due to comparable angle-time histories at the wrist and elbow joints with the major kinematic differences occurring at the shoulder. Using a subject-specific angle-driven computer model combined with a forward dynamics, equipment-specific computer model of tennis ball-racket impacts allows peak internal loading, net impulse, and shock due to ball-racket impact to be calculated which would not otherwise be possible without impractical invasive techniques. This study provides a basis for further investigation of the factors that may increase elbow loading during tennis strokes.

  5. TOPBP1 regulates RAD51 phosphorylation and chromatin loading and determines PARP inhibitor sensitivity

    DEFF Research Database (Denmark)

    Moudry, Pavel; Watanabe, Kenji; Wolanin, Kamila M.

    2016-01-01

    to chromatin and formation of RAD51 foci, but without affecting the upstream HR steps of DNA end resection and RPA loading. Furthermore, TOPBP1 BRCT domains 7/8 are essential for RAD51 foci formation. Mechanistically, TOPBP1 physically binds PLK1 and promotes PLK1 kinase-mediated phosphorylation of RAD51...

  6. Load ratio determines the ammonia recovery and energy input of an electrochemical system

    NARCIS (Netherlands)

    Rodríguez Arredondo, Mariana; Kuntke, Philipp; Heijne, Ter Annemiek; Hamelers, Hubertus V.M.; Buisman, Cees J.N.

    2017-01-01

    Complete removal and recovery of total ammonia nitrogen (TAN) from wastewaters in (bio)electrochemical systems has proven to be a challenge. The system performance depends on several factors, such as current density, TAN loading rate and pH. The interdependence among these factors is not well

  7. An Analytical Method for Determining the Load Distribution of Single-Column Multibolt Connection

    Directory of Open Access Journals (Sweden)

    Nirut Konkong

    2017-01-01

    Full Text Available The purpose of this research was to investigate the effect of geometric variables on the bolt load distributions of a cold-formed steel bolt connection. The study was conducted using an experimental test, finite element analysis, and an analytical method. The experimental study was performed using single-lap shear testing of a concentrically loaded bolt connection fabricated from G550 cold-formed steel. Finite element analysis with shell elements was used to model the cold-formed steel plate while solid elements were used to model the bolt fastener for the purpose of studying the structural behavior of the bolt connections. Material nonlinearities, contact problems, and a geometric nonlinearity procedure were used to predict the failure behavior of the bolt connections. The analytical method was generated using the spring model. The bolt-plate interaction stiffness was newly proposed which was verified by the experiment and finite element model. It was applied to examine the effect of geometric variables on the single-column multibolt connection. The effects were studied of varying bolt diameter, plate thickness, and the plate thickness ratio (t2/t1 on the bolt load distribution. The results of the parametric study showed that the t2/t1 ratio controlled the efficiency of the bolt load distribution more than the other parameters studied.

  8. Theoretical assessment of a proposal for the simplified determination of critical loads of elastic shells

    International Nuclear Information System (INIS)

    Malmberg, T.

    1986-08-01

    Within the context of the stability analysis of the cryostat of a fusion reactor the question was raised whether or not the rather lengthy conventional stability analysis can be circumvented by applying a simplified strategy based on common linear Finite Element computer programs. This strategy involves the static linear deformation analysis of the structure with and without imperfections. For some simple stability problems this approach has been shown to be successful. The purpose of this study is to derive a general proof of the validity of this approach for thin shells with arbitrary geometry under hydrostatic pressure or dead loading along the boundary. This general assessment involves two types of analyses: 1) A general stability analysis for thin shells; this is based on a simple nonlinear shell theory and a stability criterion in form of the neutral (indifferent) equilibrium condition. This result is taken as reference solution. 2) A general linear deformation analysis for thin imperfect shells and the definition of a suitable scalar parameter (β-parameter) which should represent the reciprocal of the critical load factor. It is shown that the simplified strategy (=β-parameter approach'') generally is not capable to predict the actual critical load factor irrespective whether there is a hydrostatic pressure loading or dead loading along the edge of the shell. This general result is in contrast to the observations made for some simple stability problems. Nevertheless, the results of this study do not exclude the possibility that the simplified strategy will give reasonable approximate solutions at least for a restricted class of stability problems. (orig./HP) [de

  9. Measurement of action forces and posture to determine the lumbar load of healthcare workers during care activities with patient transfers.

    Science.gov (United States)

    Theilmeier, Andreas; Jordan, Claus; Luttmann, Alwin; Jäger, Matthias

    2010-11-01

    Moving patients or other care activities with manual patient handling is characterized by high mechanical load on the lumbar spine of healthcare workers (HCWs). During the patient transfer activity, the caregivers exert lifting, pulling, and pushing forces varying over time with respect to amplitude and direction. Furthermore, the caregivers distinctly change their posture and frequently obtain postures asymmetrical to the median sagittal plane, including lateral bending and turning the trunk. This paper describes a procedure to determine lumbar load during patient transfer supported by measurement techniques and an exemplary application; this methodology represents the basis of a complex research project, the third 'Dortmund Lumbar Load Study (DOLLY 3)'. Lumbar load was determined by simulation calculations using a comprehensive biomechanical model ('The Dortmunder'). As the main influencing factors, the hand forces of the caregiver exerted during typical patient transfers and the posture and movements of the HCW were recorded in laboratory studies. The action forces were determined three-dimensionally with the help of a newly developed 'measuring bed', two different 'measuring chairs', a 'measuring bathtub', and a 'measuring floor'. To capture the forces during transfers in or at the bed, a common hospital bed was equipped with an additional framework, which is attached to the bedstead and connected to the bedspring frame via three-axial force sensors at the four corners. The other measuring systems were constructed similarly. Body movements were recorded using three-dimensional optoelectronic recording tools and video recordings. The posture and force data served as input data for the quantification of various lumbar-load indicators.

  10. Cognitive Load and Self-Determination Theories Applied to E-Learning: Impact on Students' Participation and Academic Performance.

    Science.gov (United States)

    de Araujo Guerra Grangeia, Tiago; de Jorge, Bruno; Franci, Daniel; Martins Santos, Thiago; Vellutini Setubal, Maria Silvia; Schweller, Marcelo; de Carvalho-Filho, Marco Antonio

    2016-01-01

    Emergency clerkships expose students to a stressful environment that require multiple tasks, which may have a direct impact on cognitive load and motivation for learning. To address this challenge, Cognitive Load Theory and Self Determination Theory provided the conceptual frameworks to the development of a Moodle-based online Emergency Medicine course, inspired by real clinical cases. Three consecutive classes (2013-2015) of sixth-year medical students (n = 304) participated in the course, during a curricular and essentially practical emergency rotation. "Virtual Rounds" provided weekly virtual patients in narrative format and meaningful schemata to chief complaints, in order to simulate real rounds at Emergency Unit. Additional activities such as Extreme Decisions, Emergency Quiz and Electrocardiographic challenge offered different views of emergency care. Authors assessed student´s participation and its correlation with their academic performance. A survey evaluated students´ opinions. Students graduating in 2015 answered an online questionnaire to investigate cognitive load and motivation. Each student produced 1965 pageviews and spent 72 hours logged on. Although Clinical Emergency rotation has two months long, students accessed the online course during an average of 5.3 months. Virtual Rounds was the most accessed activity, and there was positive correlations between the number of hours logged on the platform and final grades on Emergency Medicine. Over 90% of students felt an improvement in their clinical reasoning and considered themselves better prepared for rendering Emergency care. Considering a Likert scale from 1 (minimum load) to 7 (maximum load), the scores for total cognitive load were 4.79±2.2 for Virtual Rounds and 5.56±1.96 for real medical rounds(pcognitive and motivational conceptual frameworks, seems to be a strong tool to engage students in learning. It may support them to manage the cognitive challenges involved in clinical care and

  11. Cognitive Load and Self-Determination Theories Applied to E-Learning: Impact on Students' Participation and Academic Performance.

    Directory of Open Access Journals (Sweden)

    Tiago de Araujo Guerra Grangeia

    Full Text Available Emergency clerkships expose students to a stressful environment that require multiple tasks, which may have a direct impact on cognitive load and motivation for learning. To address this challenge, Cognitive Load Theory and Self Determination Theory provided the conceptual frameworks to the development of a Moodle-based online Emergency Medicine course, inspired by real clinical cases.Three consecutive classes (2013-2015 of sixth-year medical students (n = 304 participated in the course, during a curricular and essentially practical emergency rotation. "Virtual Rounds" provided weekly virtual patients in narrative format and meaningful schemata to chief complaints, in order to simulate real rounds at Emergency Unit. Additional activities such as Extreme Decisions, Emergency Quiz and Electrocardiographic challenge offered different views of emergency care. Authors assessed student´s participation and its correlation with their academic performance. A survey evaluated students´ opinions. Students graduating in 2015 answered an online questionnaire to investigate cognitive load and motivation.Each student produced 1965 pageviews and spent 72 hours logged on. Although Clinical Emergency rotation has two months long, students accessed the online course during an average of 5.3 months. Virtual Rounds was the most accessed activity, and there was positive correlations between the number of hours logged on the platform and final grades on Emergency Medicine. Over 90% of students felt an improvement in their clinical reasoning and considered themselves better prepared for rendering Emergency care. Considering a Likert scale from 1 (minimum load to 7 (maximum load, the scores for total cognitive load were 4.79±2.2 for Virtual Rounds and 5.56±1.96 for real medical rounds(p<0,01.A real-world inspired online course, based on cognitive and motivational conceptual frameworks, seems to be a strong tool to engage students in learning. It may support them to

  12. Testing to determine the leakage behavior of inflatable seals subject to severe accident loadings

    International Nuclear Information System (INIS)

    Parks, M.B.

    1988-01-01

    Under the sponsorship of the United States Nuclear Regulatory Commission, Sandia National Laboratories is currently developing test validated methods to predict the pressure capacity, at elevated temperatures, of light water reactor (LWR) nuclear containment vessels subject to loads well beyond their design basis - the so-called severe accident. Scale model tests of containments with the major penetrations represented have been carried to functional failure by internal pressurization. Also, combined pressure and elevated temperature tests of typical compression seals and gaskets, a full size personnel airlock, and of typical electrical penetration assemblies (EPAs), have been conducted in order to better understand the leakage behavior of containment penetrations. Because inflatable seals are also a part of the pressure boundary of some containments, it is important to understand their leakage behavior as well. This paper discusses the results of tests that were performed to better define the leakage behavior of inflatable seals when subjected to loads well beyond their design basis

  13. Pressurizer /Auxiliary Spray Piping Stress Analysis For Determination Of Lead Shielding Maximum Allow Able Load

    International Nuclear Information System (INIS)

    Setjo, Renaningsih

    2000-01-01

    Piping stress analysis for PZR/Auxiliary Spray Lines Nuclear Power Plant AV Unit I(PWR Type) has been carried out. The purpose of this analysis is to establish a maximum allowable load that is permitted at the time of need by placing lead shielding on the piping system on class 1 pipe, Pressurizer/Auxiliary Spray Lines (PZR/Aux.) Reactor Coolant Loop 1 and 4 for NPP AV Unit one in the mode 5 and 6 during outage. This analysis is intended to reduce the maximum amount of radiation dose for the operator during ISI ( In service Inspection) period.The result shown that the maximum allowable loads for 4 inches lines for PZR/Auxiliary Spray Lines is 123 lbs/feet

  14. Fluid and structural dynamics calculations to determine core barrel loads during blowdown (EV 3,000)

    International Nuclear Information System (INIS)

    Krieg, R.; Schlechtendahl, E.G.

    1977-01-01

    To begin with, the main physical phenomena in connection with blowdown loads on the care barrel and the computer models used are briefly described. These models have also been used in the design of the HTR test care barrel. The fluid dynamics part of the calculations was carried out using the WHAMMOD and DAPSY codes; for the structural dynamics part, the STRUDL/Dynal code was employed. (orig./RW) [de

  15. Determinants for receiving acupuncture for LBP and associated treatments: a prospective cohort study

    Directory of Open Access Journals (Sweden)

    Baum Erika

    2006-11-01

    Full Text Available Abstract Background Acupuncture is a frequently used but controversial adjunct to the treatment of chronic low back pain (LBP. Acupuncture is now considered to be effective for chronic LBP and health care systems are pressured to make a decision whether or not acupuncture should be covered. It has been suggested that providing such services might reduce the use of other health care services. Therefore, we explored factors associated with acupuncture treatment for LBP and the relation of acupuncture with other health care services. Methods This is a post hoc analysis of a longitudinal prospective cohort study. General practitioners (GPs recruited consecutive adult patients with LBP. Data on physical function, subjective mood and utilization of health care services was collected at the first consultation and at follow-up telephone interviews for a period of twelve months. Results A total of 179 (13 % out of 1,345 patients received acupuncture treatment. The majority of those (59 % had chronic LBP. Women and elderly patients were more likely to be given acupuncture. Additional determinants of acupuncture therapy were low functional capacity and chronicity of pain. Chronic (vs. acute back pain OR 1.6 (CL 1.4–2.9 was the only significant disease-related factor associated with the treatment. The strongest predictors for receiving acupuncture were consultation with a GP who offers acupuncture OR 3.5 (CL 2.9–4.1 and consultation with a specialist OR 2.1 (CL 1.9–2.3. After adjustment for patient characteristics, acupuncture remained associated with higher consultation rates and an increased use of other health care services like physiotherapy. Conclusion Receiving acupuncture for LBP depends mostly on the availability of the treatment. It is associated with increased use of other health services even after adjustment for patient characteristics. In our study, we found that receiving acupuncture does not offset the use of other health care resources

  16. Determinants for receiving acupuncture for LBP and associated treatments: a prospective cohort study

    Science.gov (United States)

    Chenot, Jean-François; Becker, Annette; Leonhardt, Corinna; Keller, Stefan; Donner-Banzhoff, Norbert; Baum, Erika; Pfingsten, Michael; Hildebrandt, Jan; Kochen, Michael M; Basler, Heinz-Dieter

    2006-01-01

    Background Acupuncture is a frequently used but controversial adjunct to the treatment of chronic low back pain (LBP). Acupuncture is now considered to be effective for chronic LBP and health care systems are pressured to make a decision whether or not acupuncture should be covered. It has been suggested that providing such services might reduce the use of other health care services. Therefore, we explored factors associated with acupuncture treatment for LBP and the relation of acupuncture with other health care services. Methods This is a post hoc analysis of a longitudinal prospective cohort study. General practitioners (GPs) recruited consecutive adult patients with LBP. Data on physical function, subjective mood and utilization of health care services was collected at the first consultation and at follow-up telephone interviews for a period of twelve months. Results A total of 179 (13 %) out of 1,345 patients received acupuncture treatment. The majority of those (59 %) had chronic LBP. Women and elderly patients were more likely to be given acupuncture. Additional determinants of acupuncture therapy were low functional capacity and chronicity of pain. Chronic (vs. acute) back pain OR 1.6 (CL 1.4–2.9) was the only significant disease-related factor associated with the treatment. The strongest predictors for receiving acupuncture were consultation with a GP who offers acupuncture OR 3.5 (CL 2.9–4.1) and consultation with a specialist OR 2.1 (CL 1.9–2.3). After adjustment for patient characteristics, acupuncture remained associated with higher consultation rates and an increased use of other health care services like physiotherapy. Conclusion Receiving acupuncture for LBP depends mostly on the availability of the treatment. It is associated with increased use of other health services even after adjustment for patient characteristics. In our study, we found that receiving acupuncture does not offset the use of other health care resources. A significant

  17. Determination of service lives under varying loading using a life-fraction rule. Pt. 1

    International Nuclear Information System (INIS)

    Schaefer, L.

    1986-01-01

    Previously the attempt has been made to improve the often accuracy of the life-fraction rule (Robinson), applied to calculate the service lives under varying loading, by introducing constants into the mathematical representation of the rule which take into account the influence of the material and the conditions of loading. Therefore, the calculated service lives are not real predictions. In this work description based on constants is dispensed with and only one boundary condition is indicated for the life-fraction rule which is necessary and sufficient to calculate correctly any fractional damage and hence any service life under varying loading. The abbreviated wording of this boundary condition is: To calculate a fractional damage, the life fraction tsub(i) must be devided by a service life tsub(m,i), the structural condition Gsub(i) being the same. The specimen (X10NiCrTi1616 steel) will rupture as soon as the sum of fractional damages has attained unity: Σsub(i)(tsub(i)/tsub(m,i)) sub(Gsub(i)) = 1. (orig./GSCH)

  18. Effects of Interferon-α/β on HBV Replication Determined by Viral Load

    Science.gov (United States)

    Tian, Yongjun; Chen, Wen-ling; Ou, Jing-hsiung James

    2011-01-01

    Interferons α and β (IFN-α/β) are type I interferons produced by the host to control microbial infections. However, the use of IFN-α to treat hepatitis B virus (HBV) patients generated sustained response to only a minority of patients. By using HBV transgenic mice as a model and by using hydrodynamic injection to introduce HBV DNA into the mouse liver, we studied the effect of IFN-α/β on HBV in vivo. Interestingly, our results indicated that IFN-α/β could have opposite effects on HBV: they suppressed HBV replication when viral load was high and enhanced HBV replication when viral load was low. IFN-α/β apparently suppressed HBV replication via transcriptional and post-transcriptional regulations. In contrast, IFN-α/β enhanced viral replication by inducing the transcription factor HNF3γ and activating STAT3, which together stimulated HBV gene expression and replication. Further studies revealed an important role of IFN-α/β in stimulating viral growth and prolonging viremia when viral load is low. This use of an innate immune response to enhance its replication and persistence may represent a novel strategy that HBV uses to enhance its growth and spread in the early stage of viral infection when the viral level is low. PMID:21829354

  19. Prospective Teachers' Value Orientations as Determinants of Preference for External and Anonymous Whistleblowing

    Science.gov (United States)

    Gokce, Asiye Toker

    2013-01-01

    Whistle-blowing indicates disclosing organizational wrongdoings resulting in harm to third parties. An individual's decision to blow the whistle might be based upon organizational, situational or personal factors. This study inquires the relationship between value orientations of prospective teachers and choices for whistle-blowing with particular…

  20. Determinants of general practitioner’s cancer related gut feelings – a prospective cohort study

    NARCIS (Netherlands)

    Donker, G.; Wiersma, E.; Heins, M.

    2016-01-01

    Background General practitioners (GPs) use gut feelings to diagnose cancer in an early stage, but little is known about the predictive value of gut feelings and how this is influenced by patient and GP characteristics. Methods Prospective cohort study of patients in 44 general practices

  1. Prevalence, course and determinants of carpal tunnel syndrome symptoms during pregnancy : A prospective study

    NARCIS (Netherlands)

    Meems, M.; Truijens, S. E. M.; Spek, V.; Visser, L. H.; Pop, V. J. M.

    2015-01-01

    Objective To investigate the prevalence, severity and relation to fluid retention of self-reported pregnancy-related carpal tunnel syndrome (CTS) symptoms in a large sample of pregnant women. Design A prospective longitudinal cohort study. Setting Dutch women who became pregnant between January 2013

  2. Large Scale Applications Using FBG Sensors: Determination of In-Flight Loads and Shape of a Composite Aircraft Wing

    Directory of Open Access Journals (Sweden)

    Matthew J. Nicolas

    2016-06-01

    Full Text Available Technological advances have enabled the development of a number of optical fiber sensing methods over the last few years. The most prevalent optical technique involves the use of fiber Bragg grating (FBG sensors. These small, lightweight sensors have many attributes that enable their use for a number of measurement applications. Although much literature is available regarding the use of FBGs for laboratory level testing, few publications in the public domain exist of their use at the operational level. Therefore, this paper gives an overview of the implementation of FBG sensors for large scale structures and applications. For demonstration, a case study is presented in which FBGs were used to determine the deflected wing shape and the out-of-plane loads of a 5.5-m carbon-composite wing of an ultralight aerial vehicle. The in-plane strains from the 780 FBG sensors were used to obtain the out-of-plane loads as well as the wing shape at various load levels. The calculated out-of-plane displacements and loads were within 4.2% of the measured data. This study demonstrates a practical method in which direct measurements are used to obtain critical parameters from the high distribution of FBG sensors. This procedure can be used to obtain information for structural health monitoring applications to quantify healthy vs. unhealthy structures.

  3. Determination of the usage factor of components after cyclic loading by means of high-resolution microstructural examination

    International Nuclear Information System (INIS)

    Seibold, A.; Scheibe, A.; Assmann, H.D.

    1991-01-01

    Materials subjected to cyclic loading experience a change in the microstructure which may affect the service life. Quantification of the microstructural changes and allocation of the microstructural condition to the corresponding point on the fatigue curve for the component material allows the usage factor to be derived. Taking the low-alloy, fine-grained structural steel 20MnMoNi55 (quenched and tempered structure) as an example, the relationship between microstructure and number of load cycles can be represented in the form of a reference curve. High-resolution examination allows the usage factor to be determined up to η=N/N f ≅0.5 under the given cyclic loading. Only a small specimen volume is required for examination using a transmission electron microscope. It can be taken from the component without affecting the required minimum wall thickness. The location of the specimen must, however, be stipulated, e.g. the location of highest loading according to calculations. When removing the specimen, care must be taken to ensure that the micro-structure is not affected. If these requirements are observed, high-resolution microstructural examination provides a method for checking the usage factor of a component. (orig.)

  4. Determination of stresses caused by fluctuation of acoustic load in the steam dryers of a BWR

    International Nuclear Information System (INIS)

    Centeno P, J.; Quezada G, S.; Prieto G, A.; Vazquez R, A.; Espinosa P, G.; Nunez C, A.

    2014-10-01

    The extended power up-rate (EPU) in a nuclear power plant cause various problems in BWR components also in the steam system. This due to increased steam flow generated in the reactor and is conveyed to the turbine by the four main steam lines (MSL). One of the most serious problems is the generation of acoustic pressure loads in the metal structure of the steam dryer which eventually leads to fatigue failure and even the appearance of cracks, and in turn it causes loose parts that are entrained by the steam and transported in the MSL. This problem is due to the fluctuation of load acoustics caused by the union of the safety or relief valves (SRV) with the MSL, spreading through these to reach the reactor pressure vessel (RPV) where the effect of resonance of the acoustic wave is amplified and impacts directly in the supporting structure of the steam dryer, skirt and the panels where the mixture liquid-steam is dried, by centrifugation effect and runoff of liquid water. Efforts in the steam dryer operating conditions of EPU for two cases will be analyzed in this work, the first is before the installation of Acoustic Side Branch (ASB), and in the second case we consider the installation of said ASB in the standpipes of SRV. The analysis was performed with numerical experiments on a platform for computational fluid dynamics with virtual geometries previously designed based on the actual components of the reactor and steam system. The model to study is delimited by the top of the RPV, the steam dryer and a section of each of the four MSL with ten standpipes of SRV. With the obtained data and considering the mechanical-structural properties of the steam dryer material, we can evaluate the mechanical resistance to impacts by acoustic pressure load and its possible deformation or cracking. (Author)

  5. Determination of semi-diurnal ocean tide loading constituents using GPS in Alaska

    DEFF Research Database (Denmark)

    Khan, Shfaqat Abbas; Tscherning, C.C.

    2001-01-01

    During the past years, the accuracy of relative positioning using differential GPS (DGPS) has been improved significantly. The present accuracy of DGPS allows us to directly estimate the differential amplitudes and Greenwich phase lags of the main semi-diurnal ocean tide loading constituents (S-2......, K-2, M-2 and N-2). For this purpose a test is carried out using two GPS stations in Alaska. One station, Chi3, is located on an island in the Gulf of Alaska, while the second station, Fair, is located far away from the coastal areas. Processing hourly GPS solutions for the baseline between Fair...

  6. Determining the Interruptible Load with Strategic Behavior in a Competitive Electricity Market

    Directory of Open Access Journals (Sweden)

    Tae Hyun Yoo

    2014-12-01

    Full Text Available In a deregulated market, independent system operators meet power balance based on supply and demand bids to maximize social welfare. Since electricity markets are typically oligopolies, players with market power may withhold capacity to maximize profit. Such exercise of market power can lead to various problems, including increased electricity prices, and hence lower social welfare. Here we propose an approach to maximize social welfare and prevent the exercising of market power by means of interruptible loads in a competitive market environment. Our approach enables management of the market power by analyzing the benefit to the companies of capacity withdrawal and scheduling resources with interruptible loads. Our formulation shows that we can prevent power companies and demand-resource owners from exercising market powers. The oligopolistic conditions are described using the Cournot model to reflect the capacity withdrawal in electricity markets. The numerical results confirm the effectiveness of proposed method, via a comparison of perfect competition and oligopoly scenarios. Our approach provides reductions in market-clearing prices, increases in social welfare, and more equal distribution of surpluses between players.

  7. Automatic determination of pressurized water reactor core loading patterns that maximize beginning-of-cycle reactivity within power-peaking and burnup constraints

    International Nuclear Information System (INIS)

    Hobson, G.H.; Turinsky, P.J.

    1986-01-01

    Computational capability has been developed to automatically determine a good estimate of the core loading pattern, which minimizes fuel cycle costs for a pressurized water reactor (PWR). Equating fuel cycle cost minimization with core reactivity maximization, the objective is to determine the loading pattern that maximizes core reactivity while satisfying power peaking, discharge burnup, and other constraints. The method utilizes a two-dimensional, coarse-mesh, finite difference scheme to evaluate core reactivity and fluxes for an initial reference loading pattern. First-order perturbation theory is applied to determine the effects of assembly shuffling on reactivity, power distribution, end-of-cycle burnup. Monte Carlo integer programming is then used to determine a near-optimal loading pattern within a range of loading patterns near the reference pattern. The process then repeats with the new loading pattern as the reference loading pattern and terminates when no better loading pattern can be determined. The process was applied with both reactivity maximization and radial power-peaking minimization as objectives. Results on a typical large PWR indicate that the cost of obtaining an 8% improvement in radial power-peaking margin is ≅2% in fuel cycle costs, for the reload core loaded without burnable poisons that was studied

  8. Mean Velocity vs. Mean Propulsive Velocity vs. Peak Velocity: Which Variable Determines Bench Press Relative Load With Higher Reliability?

    Science.gov (United States)

    García-Ramos, Amador; Pestaña-Melero, Francisco L; Pérez-Castilla, Alejandro; Rojas, Francisco J; Gregory Haff, G

    2018-05-01

    García-Ramos, A, Pestaña-Melero, FL, Pérez-Castilla, A, Rojas, FJ, and Haff, GG. Mean velocity vs. mean propulsive velocity vs. peak velocity: which variable determines bench press relative load with higher reliability? J Strength Cond Res 32(5): 1273-1279, 2018-This study aimed to compare between 3 velocity variables (mean velocity [MV], mean propulsive velocity [MPV], and peak velocity [PV]): (a) the linearity of the load-velocity relationship, (b) the accuracy of general regression equations to predict relative load (%1RM), and (c) the between-session reliability of the velocity attained at each percentage of the 1-repetition maximum (%1RM). The full load-velocity relationship of 30 men was evaluated by means of linear regression models in the concentric-only and eccentric-concentric bench press throw (BPT) variants performed with a Smith machine. The 2 sessions of each BPT variant were performed within the same week separated by 48-72 hours. The main findings were as follows: (a) the MV showed the strongest linearity of the load-velocity relationship (median r = 0.989 for concentric-only BPT and 0.993 for eccentric-concentric BPT), followed by MPV (median r = 0.983 for concentric-only BPT and 0.980 for eccentric-concentric BPT), and finally PV (median r = 0.974 for concentric-only BPT and 0.969 for eccentric-concentric BPT); (b) the accuracy of the general regression equations to predict relative load (%1RM) from movement velocity was higher for MV (SEE = 3.80-4.76%1RM) than for MPV (SEE = 4.91-5.56%1RM) and PV (SEE = 5.36-5.77%1RM); and (c) the PV showed the lowest within-subjects coefficient of variation (3.50%-3.87%), followed by MV (4.05%-4.93%), and finally MPV (5.11%-6.03%). Taken together, these results suggest that the MV could be the most appropriate variable for monitoring the relative load (%1RM) in the BPT exercise performed in a Smith machine.

  9. A theoretical/experimental approach to determining the residual strength of corroded pipelines under combined pressure/bending loads

    International Nuclear Information System (INIS)

    Kanninen, M.F.; Roy, S.; Grigory, S.C.; Pagalthivarthi, K.V.; Maple, J.

    1992-01-01

    This paper reported on a study that examined the feasibility of developing a theoretically valid methodology for assessing the residual strength of corroded oil pipelines in combined pressure loading and axial bending conditions. Bending can occur due to local subsidence that can occur in moist soil, resulting in bending stresses that can equal or exceed the pressure-related stresses. The study involved a series of pipe testing, finite element analyses and shell theory modelling. The experiment performed to validate the modelling involved an artificially degraded 20 inch diameter X52 steel pipe that was subjected to pressure and bending loadings. The integration of the 3 technical activities demonstrated the feasibility of the proposed analysis methodology for determining the potential failure of oil and gas pipelines with metal loss. Predictions were found to be in good agreement with experimental results when the methodology was combined with criteria such as the instability of the effective plastic strain. 1 ref., 7 figs.

  10. Biosorption of aluminum on Pseudomonas aeruginosa loaded on Chromosorb 106 prior to its graphite furnace atomic absorption spectrometric determination

    International Nuclear Information System (INIS)

    Tuzen, Mustafa; Soylak, Mustafa

    2008-01-01

    A biosorption procedure for separation-enrichment of aluminum in environmental samples has been presented in this work. Pseudomonas aeruginosa loaded on Chromosorb 106 has been used as biosorbent for that purpose. P. aeruginosa is a gram-negative, aerobic rod. The influences of pH of the aqueous solution, eluent type, eluent volume, sample volume, etc. were examined on the quantitative recovery of aluminum in P. aeruginosa loaded on Chromosorb 106. The effects of concomitant ions on the recoveries of aluminum were also investigated. The detection limit based on 3 sigma for aluminum is 30 ng L -1 . Three certified reference materials (LGC 6010 Hard Drinking Water, NIST-SRM 1568a Rice Flour and NRCC-DORM-2 Dogfish Muscle) were analyzed for the validation of the presented procedure. The proposed procedure was applied to the determination of aluminum in environmental samples including natural water and food samples. The concentration of aluminum in real samples was found at ppb level

  11. Cumulative socioeconomic status risk, allostatic load, and adjustment: a prospective latent profile analysis with contextual and genetic protective factors.

    Science.gov (United States)

    Brody, Gene H; Yu, Tianyi; Chen, Yi-fu; Kogan, Steven M; Evans, Gary W; Beach, Steven R H; Windle, Michael; Simons, Ronald L; Gerrard, Meg; Gibbons, Frederick X; Philibert, Robert A

    2013-05-01

    The health disparities literature has identified a common pattern among middle-aged African Americans that includes high rates of chronic disease along with low rates of psychiatric disorders despite exposure to high levels of cumulative socioeconomic status (SES) risk. The current study was designed to test hypotheses about the developmental precursors to this pattern. Hypotheses were tested with a representative sample of 443 African American youths living in the rural South. Cumulative SES risk and protective processes were assessed at ages 11-13 years; psychological adjustment was assessed at ages 14-18 years; genotyping at the 5-HTTLPR was conducted at age 16 years; and allostatic load (AL) was assessed at age 19 years. A latent profile analysis identified 5 profiles that evinced distinct patterns of SES risk, AL, and psychological adjustment, with 2 relatively large profiles designated as focal profiles: a physical health vulnerability profile characterized by high SES risk/high AL/low adjustment problems, and a resilient profile characterized by high SES risk/low AL/low adjustment problems. The physical health vulnerability profile mirrored the pattern found in the adult health disparities literature. Multinomial logistic regression analyses indicated that carrying an s allele at the 5-HTTLPR and receiving less peer support distinguished the physical health vulnerability profile from the resilient profile. Protective parenting and planful self-regulation distinguished both focal profiles from the other 3 profiles. The results suggest the public health importance of preventive interventions that enhance coping and reduce the effects of stress across childhood and adolescence.

  12. Evaluation of Bernese periacetabular osteotomy: prospective studies examining projected load-bearing area, bone density, cartilage thickness and migration.

    Science.gov (United States)

    Mechlenburg, Inger

    2008-06-01

    The typical dysplastic hip joint is characterised by maldirection of the acetabulum and femoral neck, insufficient coverage of the femoral head focally and globally and erosions of the limbus acetabuli (1). An unknown number of persons with hip dysplasia will suffer from pain in hip or groin, decreased hip function and development of osteoarthritis at a young age. The Bernese periacetabular osteotomy is performed to prevent osteoarthritis in patients with hip dysplasia and has been carried out at Aarhus University Hospital, Denmark since 1996 with more than 500 osteotomies performed. Throughout the years, research and quality improvement of the treatment has taken place and this PhD thesis is part of that process. The aims of this PhD thesis were to evaluate outcome aspects after periacetabular osteotomy in terms of I) estimating the projected loadbearing surface before and after periacetabular osteotomy, II) estimating bone density changes in the acetabulum after periacetabular osteotomy, III) developing a technique to precisely and efficiently estimate the thickness of the articular cartilage in the hip joint and IV) examining the stability of the re-orientated acetabulum after periacetabular osteotomy. In study I, we applied a stereologic method based on 3D computed tomography (CT) to estimate the projected loadbearing surface in six normal hip joints and in six dysplastic hips. The dysplastic hips were CT scanned before and after periacetabular osteotomy. We found that the average area of the projected loadbearing surface of the femoral head preoperatively was 7.4 (range 6.5-8.4) cm2 and postoperatively 11 (9.8-14.3) cm2. The area of the projected loadbearing surface was increased significantly with a mean of 49% (34-70%) postoperatively and thus comparable with the load-bearing surface in the normal control group. Double measurements were performed and the error variance of the mean was estimated to be 1.6%. The effect of overprojection, on the projected

  13. Determination of transference numbers in ionic conductors by the EMF method with active load

    International Nuclear Information System (INIS)

    Gorelov, V.P.

    1988-01-01

    Method for determining transference numbers in ionic conductors by means of measuring EMF of concentration cell with accout of polarization resistance of electrodes is suggested. The method enables to determine easily very small transference numbers of electron component against the background of predominating ionic conductivity. To illustrate the method there were determined transference numbers for the sample of industrial solid electrolyte in the cell; O 2 Pt|0.91ZrO 2 +0.09Y 2 O 3 |Pt, air

  14. Experimentally determined distribution of granular-flow characteristics in collisional bed load transport

    Directory of Open Access Journals (Sweden)

    Matoušek Václav

    2018-01-01

    Full Text Available A series of laboratory experiments on turbulent open-channel two-phase flow in a form of intense bed load transport is reported. Measurements in a laboratory tilting flume included camera based imaging techniques to identify the structure of the flow at the local level. Obtained experimental distributions of two-phase flow related parameters - granular velocity, concentration, and temperature - across a collisional transport layer are discussed. The results are analysed together with additional measured quantities (discharges of mixture and grains, flow depth, bed slope etc. Our major goal is to evaluate the distribution of granular stresses across the transport layer with a special attention paid to the interface between the transport layer and the bed. Furthermore, comparisons are discussed between the experimental results and predictions produced by suitable kinetic-theory based models.

  15. Determination of the ultimate load in concrete slabs by the yield line finite element method

    International Nuclear Information System (INIS)

    Vaz, L.E.; Feijo, B.; Martha, L.F.R.; Lopes, M.M.

    1984-01-01

    A method for calculating the ultimate load in reinforced concrete slabs is proposed. The method follows the finite element aproach representating the continuum slab as an assembly of rigid triangular plates connected along their sides through yield line elements. This approach leads to the definition of the displacement configuration of the plate only as a function of the transversal displacement at the nodes of the mesh (1 DOF per node) reducing significantly the number of DOF's in relation to the conventional formulation by means of the finite element method (minimum of 3 DOF per node). Nonlinear behaviour of the reinforced concrete section is considered in the definition of the moment rotation curve of the yield lines. The effect of the in plane forces acting in the middle surface of the plate is also taken into account. The validity of the model is verified comparing the numerical solutions with the results of the classical yield line theory. (Author) [pt

  16. 40 CFR 86.129-00 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.129-00 Section 86.129-00 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. Applicability. Section 86.129-94 (a) applies... testing using paragraphs (e)(1) and (e)(2) of this section. (f)(1) Required test dynamometer inertia...

  17. 40 CFR 86.129-80 - Road load power, test weight, and inertia weight class determination.

    Science.gov (United States)

    2010-07-01

    ... inertia weight class determination. 86.129-80 Section 86.129-80 Protection of Environment ENVIRONMENTAL... power, test weight, and inertia weight class determination. (a) Flywheels, electrical or other means of... weight (pounds) Equivalent test weight (pounds) Inertia weight class (pounds) Up to 1,062 1,000 1,000 1...

  18. On problems of hydrogen load of sponge palladium and determination of hydrogen content in it

    International Nuclear Information System (INIS)

    Mittag, E.; Pleis, U.; Roemer, J.

    1977-01-01

    In the process of catalytic dehalogenation applied as a method for preparation of organic compounds labelled with tritium a special importance pertains to the determination of hydrogen (or tritium) bound on the catalyst. Hydrogen contained in palladium black may be determined quantitatively by oxidation with Pd ++ ions and successive potentiometric titration of the released H + ions. The method permits to obtain data on the quality of the catalyst and on the gas losses on the catalyst. Moreover, in connection with the radioactivity measurement, this method may be used for specific activity determination of the tritium gas

  19. Clinical value of determination HIV viral load in the cerebrospinal fluid of HIV-infected patients

    Directory of Open Access Journals (Sweden)

    V. B. Musatov

    2015-01-01

    Full Text Available Aim. To analyze the concentration of HIV RNA in the cerebrospinal fluid and to evaluate its significance in the pathology of the central nervous system among HIV infected persons.Materials: We examined 36 patients with HIV infection with signs of pathology of the central nervous system. All patients was done completed a standard investigation of cerebrospinal fluid, cytological examination and detection viral load of HIV in the cerebrospinal fluid and serum.Results. A different of opportunistic and HIV-related disease was diagnosed in 29 patients. The most frequent pathology of the nervous system (12 cases is a diffuse HIV-associated brain damage occurring in 7 patients in the form of aseptic non purulent meningitis and in 5 patients in the form of encephalitis. The average value of the absolute and relative count of CD4-lymphocytes in patients amounted 147,0 cells/μl (40,0; 408,75 and 10.0% (4,00; 18,50. Pathological changes in cellular composition and protein concentration of cerebrospinal fluid detected in 19 cases. Replication of HIV in the cerebrospinal fluid are detected in 31 of 32 patients not receiving antiretroviral therapy, including 17 patients with normal values of cerebrospinal fluid. The average HIV viral load in the cerebrospinal fluid was 15 133,0 copies/ml (2501,0; 30624,0 or 4,18 (3,35; 4,48 lg HIV RNA, average HIV viral load in serum – 62 784,0 copies/ml (6027,5; 173869,0 or 4,80 4,80 (3,7; 5,2 lg HIV RNA. The concentration of HIV in the cerebrospinal fluid was significantly lower than in serum (4,18 and 4,80 lg HIV RNA, p=0.027. 4 patients with severe, multietiology damage of the central nervous system viral, microbial and fungal etiology, there was an inverse relationship between the concentration of HIV in the cerebrospinal fluid and in serum, the concentrations of HIV was higher in the cerebrospinal fluid.Conclusion: Among the majority of HIV-infected patients with signs of the central

  20. Determining the Response of Periodontal Teeth is Limited to Defects in the Integrity of the Dentition Loading

    Directory of Open Access Journals (Sweden)

    Kopytov А.А.

    2011-03-01

    Full Text Available Stability of the tooth characterizes its ability to perceive occlusal load. As the footprint specific loading functioning periodontium increases. To neutralize the impact of the load component of periodontitis should restore the integrity of the dentition

  1. Strength of shock-loaded single-crystal tantalum [100] determined using in situ broadband x-ray Laue diffraction.

    Science.gov (United States)

    Comley, A J; Maddox, B R; Rudd, R E; Prisbrey, S T; Hawreliak, J A; Orlikowski, D A; Peterson, S C; Satcher, J H; Elsholz, A J; Park, H-S; Remington, B A; Bazin, N; Foster, J M; Graham, P; Park, N; Rosen, P A; Rothman, S R; Higginbotham, A; Suggit, M; Wark, J S

    2013-03-15

    The strength of shock-loaded single crystal tantalum [100] has been experimentally determined using in situ broadband x-ray Laue diffraction to measure the strain state of the compressed crystal, and elastic constants calculated from first principles. The inferred strength reaches 35 GPa at a shock pressure of 181 GPa and is in excellent agreement with a multiscale strength model [N. R. Barton et al., J. Appl. Phys. 109, 073501 (2011)], which employs a hierarchy of simulation methods over a range of length scales to calculate strength from first principles.

  2. Mathematical Determination of Thermal Load for Fluidised Bed Furnaces Using Sawdust

    Directory of Open Access Journals (Sweden)

    Antonescu Nicolae

    2014-06-01

    Full Text Available For technical applications, a physical model capable of predicting the particle evolution in the burning process along its trajectory through the furnace is very useful. There are two major demands: all the thermo-dynamic processes that describe the particle burning process must be accounted and the model must be written in such equation terms to allow the intervention for parameter settings and particle definition. The computations were performed for the following parameters: furnace average temperature between 700 and 1200 °C, size of the sawdust particle from 4 to 6 mm and fix carbon ignition between 500 and 900 °C. The values obtained for the characteristic parameters of the burning process ranged from 30 to 60 [kg/(h·m3] for the gravimetrical burning speed WGh and from 150 to 280 [kW/m3] for the volumetric thermal load of the furnace QV. The main conclusion was that the calculus results are in good agreement with the experimental data from the pilot installations and the real-case measurements in the sawdust working boiler furnaces or pre-burning chambers. Another very important conclusion is that the process speed variation, when the furnace temperature changes, confirms the thermo-kinetic predictions, namely that the burning process speed decreases when the furnace temperature increases.

  3. Structural determinants of miRNAs for RISC loading and slicer-independent unwinding.

    Science.gov (United States)

    Kawamata, Tomoko; Seitz, Hervé; Tomari, Yukihide

    2009-09-01

    MicroRNAs (miRNAs) regulate expression of their target mRNAs through the RNA-induced silencing complex (RISC), which contains an Argonaute (Ago) family protein as a core component. In Drosophila melanogaster, miRNAs are generally sorted into Ago1-containing RISC (Ago1-RISC). We established a native gel system that can biochemically dissect the Ago1-RISC assembly pathway. We found that miRNA-miRNA* duplexes are loaded into Ago1 as double-stranded RNAs in an ATP-dependent fashion. In contrast, unexpectedly, unwinding of miRNA-miRNA* duplexes is a passive process that does not require ATP or slicer activity of Ago1. Central mismatches direct miRNA-miRNA* duplexes into pre-Ago1-RISC, whereas mismatches in the seed or guide strand positions 12-15 promote conversion of pre-Ago1-RISC into mature Ago1-RISC. Our findings show that unwinding of miRNAs is a precise mirror-image process of target recognition, and both processes reflect the unique geometry of RNAs in Ago proteins.

  4. Graphene-loaded nanofiber-modified electrodes for the ultrasensitive determination of dopamine

    Energy Technology Data Exchange (ETDEWEB)

    Rodthongkum, Nadnudda, E-mail: Nadnudda.R@chula.ac.th [Metallurgy and Materials Science Research Institute, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Ruecha, Nipapan [Program in Macromolecular Science, Faculty of Science, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Rangkupan, Ratthapol [Metallurgy and Materials Science Research Institute, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Center of Innovative Nanotechnology, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand); Vachet, Richard W. [Department of Chemistry, University of Massachusetts Amherst, Amherst, MA 01002 (United States); Chailapakul, Orawon, E-mail: corawon@chula.ac.th [Electrochemistry and Optical Spectroscopy Research Unit, Department of Chemistry, Faculty of Science, Chulalongkorn University, Pathumwan, Bangkok 10330 (Thailand)

    2013-12-04

    Graphical abstract: -- Highlights: •A novel electrode based on electrospun graphene/polyaniline/polystyrene nanofibers has been developed. •The proposed system provides ultrahigh sensitivity, good selectivity and wide linearity for the determination of dopamine. •This system was successfully applied to determine dopamine in complex biological environment with excellent reproducibility. -- Abstract: A novel and highly sensitive electrochemical system based on electrospun graphene/polyaniline/polystyrene (G/PANI/PS) nanofiber-modified screen-printed carbon electrodes has been developed for dopamine (DA) determination. A dramatic increase (9 times) in the current signal for the redox reaction of a standard, ferri/ferrocyanide [Fe(CN){sub 6}]{sup 3−/4−} couple was found when compared to an unmodified electrode. This modified electrode also exhibited favorable electron transfer kinetics and excellent electrocatalytic activity toward the oxidation of DA. When used together with square wave voltammetry (SWV), DA can be selectively determined in the presence of the common interferents (i.e. ascorbic acid and uric acid). Under optimal conditions, a very low limit of detection (0.05 nM) and limit of quantification (0.30 nM) were achieved for DA. In addition, a wide dynamic range of 0.1 nM to 100 μM was found for this electrode system. Finally, the system can be successfully applied to determine DA in complex biological environment (e.g. human serum, urine) with excellent reproducibility.

  5. DEVELOPMENT OF THE LOAD MEASURING DEVICES TO DETERMINE THE RESIDUAL DEFORMATION OF THE ELASTIC SENSING ELEMENT

    Directory of Open Access Journals (Sweden)

    Ivan V. Antonets

    2018-01-01

    Full Text Available The main focus in the design of weighing and batching devices is to create a gravimetric technique, capable of providing not only mass measurement – weighing with the required accuracy and speed, but also automatic control of technological processes and their control and regulation. In this case, the opportunity of two-way communication with a computer when designing the load measuring devices is realized, allowing remote monitoring and solution of logical problems associated with the management process. Modern automatic weighing and batching devices are important parts of comprehensive automation in different branches of industry. Existing developments of electrical, electronic, computing and other branches of instrument engineering techniques allow to implement transformations of the measured quantity with a very high degree of accuracy. However, if the measured quantity in the weighing process is perceived by the elastic sensing element of low quality, then no matter how high the accuracy of further changes is; the characteristics of the elastic element will limit the accuracy of the instrument as a whole. Although the elastic elements are simple mechanical parts, and many types of elastic elements are known and are widely used for many decades, their performance often does not meet the requirements, and hampers the device creation of high accuracy classes. Growing requirements for primary transformer makes actual the problem solution of improving the quality of elastic sensing elements not only in the manufacture but in the design. This led to the appearance of projects aimed at the development of computational and experimental methods that have altered the methodology for the design of force measuring devices.

  6. Determining the economic cost of ICU treatment: a prospective "micro-costing" study.

    LENUS (Irish Health Repository)

    McLaughlin, Anne Marie

    2012-02-01

    OBJECTIVE: To prospectively assess the cost of patients in an adult intensive care unit (ICU) using bottom-up costing methodology and evaluate the usefulness of "severity of illness" scores in estimating ICU cost. METHODS AND DESIGN: A prospective study costing 64 consecutive admissions over a 2-month period in a mixed medical\\/surgical ICU. RESULTS: The median daily ICU cost (interquartile range, IQR) was 2,205 euro (1,932 euro-3,073 euro), and the median total ICU cost (IQR) was 10,916 euro (4,294 euro-24,091 euro). ICU survivors had a lower median daily ICU cost at 2,164 per day, compared with 3,496 euro per day for ICU non-survivors (P = 0.08). The requirements for continuous haemodiafiltration, blood products and anti-fungal agents were associated with higher daily and overall ICU costs (P = 0.002). Each point increase in SAPS3 was associated with a 305 euro (95% CI 31 euro-579 euro) increase in total ICU cost (P = 0.029). However, SAPS3 accounted for a small proportion of the variance in this model (R (2) = 0.08), limiting its usefulness as a stand-alone predictor of cost in clinical practice. A model including haemodiafiltration, blood products and anti-fungal agents explained 54% of the variance in total ICU cost. CONCLUSION: This bottom-up costing study highlighted the considerable individual variation in costs between ICU patients and identified the major factors contributing to cost. As the requirement for expensive interventions was the main driver for ICU cost, "severity of illness" scores may not be useful as stand-alone predictors of cost in the ICU.

  7. Determination of Actual Friction Factors in Metal Forming under Heavy Loaded Regimes Combining Experimental and Numerical Analysis

    Science.gov (United States)

    Camacho, Ana María; Veganzones, Mariano; Claver, Juan; Martín, Francisco; Sevilla, Lorenzo; Sebastián, Miguel Ángel

    2016-01-01

    Tribological conditions can change drastically during heavy loaded regimes as experienced in metal forming; this is especially critical when lubrication can only be applied at the early stage of the process because the homogeneous lubricant layer can break along the die-workpiece interface. In these cases, adopting a constant friction factor for the lubricant-surface pair may not be a valid assumption. This paper presents a procedure based on the use of dual friction factor maps to determine friction factors employed in heavy loaded regimes. A finite element (FE) simulation is used to obtain the friction factor map for the alloy UNS A96082. Experiments were conducted using four lubricants (aluminum anti-size, MoS2 grease, silicone oil, and copper paste) to determine the actual friction curves. The experimental procedure is based on the application of lubricant only at the beginning of the first stage of ring compression, and not at intermediate stages as is usual in typical ring compression tests (RCTs). The results show that for small reductions (rh 20%), it is recommended to obtain an average value of the friction factor for every lubricant-surface pair in the range of deformation considered. PMID:28773868

  8. Determination of Actual Friction Factors in Metal Forming under Heavy Loaded Regimes Combining Experimental and Numerical Analysis

    Directory of Open Access Journals (Sweden)

    Ana María Camacho

    2016-09-01

    Full Text Available Tribological conditions can change drastically during heavy loaded regimes as experienced in metal forming; this is especially critical when lubrication can only be applied at the early stage of the process because the homogeneous lubricant layer can break along the die-workpiece interface. In these cases, adopting a constant friction factor for the lubricant-surface pair may not be a valid assumption. This paper presents a procedure based on the use of dual friction factor maps to determine friction factors employed in heavy loaded regimes. A finite element (FE simulation is used to obtain the friction factor map for the alloy UNS A96082. Experiments were conducted using four lubricants (aluminum anti-size, MoS2 grease, silicone oil, and copper paste to determine the actual friction curves. The experimental procedure is based on the application of lubricant only at the beginning of the first stage of ring compression, and not at intermediate stages as is usual in typical ring compression tests (RCTs. The results show that for small reductions (rh < 20%, the conventional RCT can be applied because the tribological conditions remain similar. For large reductions (rh > 20%, it is recommended to obtain an average value of the friction factor for every lubricant-surface pair in the range of deformation considered.

  9. Determination of Selected Polycyclic Aromatic Compounds in Particulate Matter Samples with Low Mass Loading: An Approach to Test Method Accuracy

    Directory of Open Access Journals (Sweden)

    Susana García-Alonso

    2017-01-01

    Full Text Available A miniaturized analytical procedure to determine selected polycyclic aromatic compounds (PACs in low mass loadings (<10 mg of particulate matter (PM is evaluated. The proposed method is based on a simple sonication/agitation method using small amounts of solvent for extraction. The use of a reduced sample size of particulate matter is often limiting for allowing the quantification of analytes. This also leads to the need for changing analytical procedures and evaluating its performance. The trueness and precision of the proposed method were tested using ambient air samples. Analytical results from the proposed method were compared with those of pressurized liquid and microwave extractions. Selected PACs (polycyclic aromatic hydrocarbons (PAHs and nitro polycyclic aromatic hydrocarbons (NPAHs were determined by liquid chromatography with fluorescence detection (HPLC/FD. Taking results from pressurized liquid extractions as reference values, recovery rates of sonication/agitation method were over 80% for the most abundant PAHs. Recovery rates of selected NPAHs were lower. Enhanced rates were obtained when methanol was used as a modifier. Intermediate precision was estimated by data comparison from two mathematical approaches: normalized difference data and pooled relative deviations. Intermediate precision was in the range of 10–20%. The effectiveness of the proposed method was evaluated in PM aerosol samples collected with very low mass loadings (<0.2 mg during characterization studies from turbofan engine exhausts.

  10. Determination of material behavior in 700 C turbine components under component and load specific conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lueckemeyer, N.; Kirchner, H.; Kern, T.U. [Siemens AG, Muehlheim (Germany). Energy Sector; Reigl, M. [Alstom Power, Baden (Switzerland); Klenk, A.; Klein, T. [Stuttgart Univ. (Germany). MPA; Schwienheer, M.; Cui, L.; Scholz, A.; Berger, C. [Institut fuer Werkstoffkunde (IfW), Darmstadt (Germany)

    2010-07-01

    With global warming being one of mankind's greatest challenges, an increasing demand for electricity world-wide, and studies showing that fossil resources like coal and gas will remain a major source for electricity for the next couple of decades, research into the development of highest efficiency fossil power plants has become a top priority. Calculations for coal fired power plants have shown that CO{sub 2} emissions can be reduced by as much as 7% compared to the current state of the art equipment. It can be reached by increasing the live steam parameters to 700 C and 350bar. To achieve the desired operating hours at this temperature the application of nickel base materials is necessary for the main components such as rotors, inner casings and valves. Nowadays, the use of Nickel base alloys is common practice for selected gas turbine components. However, with steam turbine rotors being 1000mm in diameter and casings with wall thicknesses higher than 100mm the gas turbine application range and experience for nickel base alloys are well exceeded. This paper uses a basic design for a steam turbine to illustrate the core challenges in developing nickel based steam turbine components, such as casting, forging, nondestructive testing and welding. Suitable nickel based alloys have been investigated in research projects over the past years. The research results are summarized and an explanation is given as to why Alloy617 was selected for forged components and Alloy625 for cast components. This paper then focuses on the material behavior under long term and complex loading conditions and on the development of life time concepts for thick walled components made from these alloys. Due to the differences in the material behavior of nickel base alloys, the existing steel design philosophies cannot be completely adopted but rather must be carefully evaluated and modified where necessary. To do this, large test components were manufactured. Based on both standard tests

  11. Contact-free sheet resistance determination of large area graphene layers by an open dielectric loaded microwave cavity

    International Nuclear Information System (INIS)

    Shaforost, O.; Wang, K.; Adabi, M.; Guo, Z.; Hanham, S.; Klein, N.; Goniszewski, S.; Gallop, J.; Hao, L.

    2015-01-01

    A method for contact-free determination of the sheet resistance of large-area and arbitrary shaped wafers or sheets coated with graphene and other (semi) conducting ultrathin layers is described, which is based on an open dielectric loaded microwave cavity. The sample under test is exposed to the evanescent resonant field outside the cavity. A comparison with a closed cavity configuration revealed that radiation losses have no significant influence of the experimental results. Moreover, the microwave sheet resistance results show good agreement with the dc conductivity determined by four-probe van der Pauw measurements on a set of CVD samples transferred on quartz. As an example of a practical application, correlations between the sheet resistance and deposition conditions for CVD graphene transferred on quartz wafers are described. Our method has a high potential as measurement standard for contact-free sheet resistance measurement and mapping of large area graphene samples

  12. A numerical model for the determination of periodic solutions of pipes subjected to non-conservative loads

    International Nuclear Information System (INIS)

    Velloso, P.A.; Galeao, A.C.

    1989-05-01

    This paper deals with nonlinear vibrations of pipes subjected to non-conservative loads. Periodic solutions of these problems are determined using a variational approach based on Hamilton's Principle combined with a Fourier series expansion to describe the displacement field time dependence. A finite element model which utilizes Hemite's cubic interpolation for both axial and transversal displacement amplitudes is used. This model is applied to the problem of a pipe subjected to a tangential and a normal follower force. The numerical results obtained with this model are compared with the corespondent solutions determined using a total lagrangian description for the Principle of Virtual Work, coupled with Newmark's step-by-step integration procedure. It is shown that for small to moderate displacement amplitudes the one-term Fourier series approximation compares fairly well with the predicted solution. For large displacements as least a two-term approximation should be utilized [pt

  13. A self-loading microfluidic device for determining the minimum inhibitory concentration of antibiotics.

    Science.gov (United States)

    Cira, Nate J; Ho, Jack Y; Dueck, Megan E; Weibel, Douglas B

    2012-03-21

    This article describes a portable microfluidic technology for determining the minimum inhibitory concentration (MIC) of antibiotics against bacteria. The microfluidic platform consists of a set of chambers molded in poly(dimethylsiloxane) (PDMS) that are preloaded with antibiotic, dried, and reversibly sealed to a second layer of PDMS containing channels that connect the chambers. The assembled device is degassed via vacuum prior to its use, and the absorption of gas by PDMS provides the mechanism for actuating and metering the flow of fluid in the microfluidic channels and chambers. During the operation of the device, degas driven flow introduces a suspension of bacterial cells, dissolves the antibiotic, and isolates cells in individual chambers without cross contamination. The growth of bacteria in the chambers in the presence of a pH indicator produces a colorimetric change that can be detected visually using ambient light. Using this device we measured the MIC of vancomycin, tetracycline, and kanamycin against Enterococcus faecalis 1131, Proteus mirabilis HI4320, Klebsiella pneumoniae, and Escherichia coli MG1655 and report values that are comparable to standard liquid broth dilution measurements. The device provides a simple method for MIC determination of individual antibiotics against human pathogens that will have applications for clinical and point-of-care medicine. Importantly, this device is designed around simplicity: it requires a single pipetting step to introduce the sample, no additional components or external equipment for its operation, and provides a straightforward visual measurement of cell growth. As the device introduces a novel approach for filling and isolating dead-end microfluidic chambers that does not require valves and actuators, this technology should find applications in other portable assays and devices.

  14. Determinants of breastfeeding initiation and cessation among employed mothers: a prospective cohort study.

    Science.gov (United States)

    Dagher, Rada K; McGovern, Patricia M; Schold, Jesse D; Randall, Xian J

    2016-07-29

    The U.S. continues to have one of the lowest breastfeeding rates in the industrialized world. Studies have shown that full-time employment and early return to work decreased breastfeeding duration, but little is known about the relationship between leave policies and breastfeeding initiation and cessation. This study aimed to identify workplace-related barriers and facilitators associated with breastfeeding initiation and cessation in the first 6 months postpartum. A prospective cohort study design was utilized to recruit 817 Minnesota women aged 18 and older while hospitalized for childbirth. Selection criteria included English-speaking, employed mothers with a healthy, singleton birth. These women were followed up using telephone interviews at 6 weeks, 12 weeks, and 6 months after childbirth. The main study outcomes were breastfeeding initiation, measured during hospital enrollment, and breastfeeding cessation by 6 months postpartum. Women were 30 years old; 86 % were White, and 73 % were married. Breastfeeding rates were 81 % at childbirth, 67 % at 6 weeks, 49 % at 12 weeks, and 33 % at 6 months postpartum. Logistic regression revealed the odds of breastfeeding initiation were higher for women who: held professional jobs, were primiparae, had graduate degree, did not smoke prenatally, had no breastfeeding problems, and had family or friends who breastfeed. Survival analyses showed the hazard for breastfeeding cessation by 6 months was: higher for women who returned to work at any time during the 6 months postpartum versus those who did not return, lower for professional workers, higher among single than married women, higher for every educational category compared to graduate school, and higher for those with no family or friends who breastfeed. While employer paid leave policy did not affect breastfeeding initiation or cessation, women who took shorter leaves were more likely to stop breastfeeding in the first 6 months postpartum. Future research should examine

  15. Determinants of Deescalation Failure in Critically Ill Patients with Sepsis: A Prospective Cohort Study

    Directory of Open Access Journals (Sweden)

    Nawal Salahuddin

    2016-01-01

    Full Text Available Introduction. Deescalation refers to either discontinuation or a step-down of antimicrobials. Despite strong recommendations in the Surviving Sepsis Guidelines (2012 to deescalate, actual practices can vary. Our objective was to identify variables that are associated with deescalation failure. Methods. In this prospective study of patients with sepsis/septic shock, patients were categorized into 4 groups based on antibiotic administration: no change in antibiotics, deescalation, escalation (where antibiotics were changed to those with a broader spectrum of antimicrobial coverage, or mixed changes (where both escalation to a broader spectrum of coverage and discontinuation of antibiotics were carried out. Results. 395 patients were studied; mean APACHE II score was 24±7.8. Antimicrobial deescalation occurred in 189 (48% patients; no changes were made in 156 (39% patients. On multivariate regression analysis, failure to deescalate was significantly predicted by hematologic malignancy OR 3.3 (95% CI 1.4–7.4 p<0.004, fungal sepsis OR 2.7 (95% CI 1.2–5.8 p=0.011, multidrug resistance OR 2.9 (95% CI 1.4–6.0 p=0.003, baseline serum procalcitonin OR 1.01 (95% CI 1.003–1.016 p=0.002, and SAPS II scores OR 1.01 (95% CI 1.004–1.02 p=0.006. Conclusions. Current deescalation practices reflect physician reluctance when dealing with complicated, sicker patients or with drug-resistance or fungal sepsis. Integrating an antibiotic stewardship program may increase physician confidence and provide support towards increasing deescalation rates.

  16. A prospective cohort study to evaluate peridomestic infection as a determinant of dengue transmission: Protocol

    Directory of Open Access Journals (Sweden)

    Martínez-Vega Ruth

    2012-04-01

    Full Text Available Abstract Background Vector control programs, which have focused mainly on the patient house and peridomestic areas around dengue cases, have not produced the expected impact on transmission. This project will evaluate the assumption that the endemic/epidemic transmission of dengue begins around peridomestic vicinities of the primary cases. Its objective is to assess the relationship between symptomatic dengue case exposure and peridomestic infection incidence. Methods/Design A prospective cohort study will be conducted (in Tepalcingo and Axochiapan, in the state of Morelos, Mexico, using the state surveillance system for the detection of incident cases. Paired blood specimens will be collected from both the individuals who live with the incident cases and a sample of subjects residing within a 25-meter radius of such cases (exposed cohort, in order to measure dengue-specific antibodies. Other subjects will be selected from areas which have not presented any incident cases within 200 meters, during the two months preceding the sampling (non-exposed cohort. Symptomatic/asymptomatic incident infection will be considered as the dependent variable, exposure to confirmed dengue cases, as the principal variable, and the socio-demographic, environmental and socio-cultural conditions of the subjects, as additional explanatory variables. Discussion Results indicating a high infection rate among the exposed subjects would justify the application of peridomestic control measures and call for an evaluation of alternate causes for insufficient program impact. On the other hand, a low incidence of peridomestic-infected subjects would support the hypothesis that infection occurs outside the domicile, and would thus explain why the vector control measures applied in the past have exerted such a limited impact on cases incidence rates. The results of the present study may therefore serve to reassess site selection for interventions of this type.

  17. Determination of the load factor of an industrial installation: application to the Silva process

    International Nuclear Information System (INIS)

    Le Guyadec, E.; Levoy, R.; Michel, N.; Radwan, J.; Valadier, L.

    2000-01-01

    In the present development phase of the SILVA process, the CEA has to calculate the availability of the future SILVA plant. Its production capacity will greatly depend on the reliability of its components. Specific software has been developed to calculate this, basically divided into three parts Database (CRESUS) on the reliability and maintainability of the components gathered into functional groups. Database (REMUS) on continuous degradation laws for their performance. Code (OCTOPUS) on production capacity, containing three models - model of the architecture of the laser, separator and shuttle apparatus. - numerical code to calculate production from the states of the equipment. - model for maintenance scenarios. A complete set of data is processed concerning the failure or survival of actually tested components, or the scaling-up models proposed by the experts. The availability of the future SILVA plant is finally obtained with its production rate and its optimum maintenance policy, comprising curative and preventive maintenance. The entire data chain is organized to be structured, traceable and shared by all the players. At present, data from 15 experimental installations, 50 types of equipment and 221 components are taken into account for compilation of the CRESUS database. Information such as test characteristics, description of events (i.e. preventive component exchange or type of failure, etc.) and description of the version of the components under test, are furnished by the experimenters in user-friendly forms developed with 'Access' software. These data are used to calculate the component failure laws through the history of each. This is followed by the determination of the reliability law parameters and confidence limits for the functional groups, for example the beta and eta parameters of the universal statistical Weibull distribution for the failure rate determined by a maximum likelihood method. This provides information such as Mean Time Before

  18. Intercomparison of Methods for Determination of Resonant Frequency Shift of a Microstrip Patch Antenna Loaded with Hevea Rubber Latex

    Directory of Open Access Journals (Sweden)

    Nor Zakiah Yahaya

    2014-01-01

    Full Text Available This paper presents an intercomparison between the finite element method, method of moment, and the variational method to determine the effect of moisture content on the resonant frequency shift of a microstrip patch loaded with wet material. The samples selected for this study were Hevea rubber latex with different percentages of moisture content from 35% to 85%. The results were compared with the measurement data in the frequency range between 1 GHz and 4 GHz. It was found that the finite element method is the most accurate among all the three computational techniques with 0.1 mean error when compared to the measured resonant frequency shift. A calibration equation was obtained to predict moisture content from the measured frequency shift with an accuracy of 2%.

  19. Analytical validation of an ultraviolet-visible procedure for determining lutein concentration and application to lutein-loaded nanoparticles.

    Science.gov (United States)

    Silva, Jéssica Thaís do Prado; Silva, Anderson Clayton da; Geiss, Julia Maria Tonin; de Araújo, Pedro Henrique Hermes; Becker, Daniela; Bracht, Lívia; Leimann, Fernanda Vitória; Bona, Evandro; Guerra, Gustavo Petri; Gonçalves, Odinei Hess

    2017-09-01

    Lutein is a carotenoid presenting known anti-inflammatory and antioxidant properties. Lutein-rich diets have been associated with neurological improvement as well as reduction of the risk of vision loss due to Age-Related Macular Degeneration (AMD). Micro and nanoencapsulation have demonstrated to be effective techniques in protecting lutein against degradation and also in improving its bioavailability. However, actual lutein concentration inside the capsules and encapsulation efficiency are key parameters that must be precisely known when designing in vitro and in vivo tests. In this work an analytical procedure was validated for the determination of the actual lutein content in zein nanoparticles using ultraviolet-visible spectroscopy. Method validation followed the International Conference on Harmonisation (ICH) guidelines which evaluate linearity, detection limit, quantification limit, accuracy and precision. The validated methodology was applied to characterize lutein-loaded nanoparticles. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Determinants of prenatal health care utilisation by low-risk women : A prospective cohort study

    NARCIS (Netherlands)

    Feijen-de Jong, Esther I.; Jansen, Danielle E. M. C.; Baarveld, Frank; Boerleider, Agatha W.; Spelten, Evelien; Schellevis, Francois; Reijneveld, Sijmen A.

    Background: Prenatal health care is pivotal in providing adequate prevention and care to pregnant women. Aim: We examined the determinants of inadequate prenatal health care utilisation by low-risk women in primary midwifery-led care in the Netherlands. Methods: We used longitudinal data from the

  1. Determinants of prenatal health care utilisation by low-risk women: a prospective cohort study.

    NARCIS (Netherlands)

    Feijen-de Jong, E.I.; Jansen, D.E.M.C.; Baarveld, F.; Boerleider, A.W.; Spelten, E.; Schellevis, F.; Reijneveld, S.A.

    2015-01-01

    Background: Prenatal health care is pivotal in providing adequate prevention and care to pregnant women. Aim: We examined the determinants of inadequate prenatal health care utilisation by low-risk women in primary midwifery-led care in the Netherlands. Methods: We used longitudinal data from the

  2. Determinants of prenatal health care utilisation by low-risk women: A prospective cohort study

    NARCIS (Netherlands)

    Feijen-de Jong, E.I.; Jansen, D.E.M.C.; Baarveld, F.; Boerleider, A.W.; Spelten, E.; Schellevis, F.; Reijneveld, S.A.

    2015-01-01

    Background: Prenatal health care is pivotal in providing adequate prevention and care to pregnant women. Aim: We examined the determinants of inadequate prenatal health care utilisation by low-risk women in primary midwifery-led care in the Netherlands. Methods: We used longitudinal data from the

  3. Epidemiology, determinants and dynamics of cholera in pakistan: gaps and prospects for future research

    International Nuclear Information System (INIS)

    Naseer, M.; Jamali, T.

    2014-01-01

    Cholera is one of the notifiable endemic diseases in Pakistan, but the reporting of cholera cases is still unsatisfactory. Most of the diagnosed cases are never reported to the relevant authorities. In the year 1993 - 2005, the country did not report any single case of cholera to the WHO. The objectives of this review were to understand the epidemiology and to identify the possible determinants of cholera infection in Pakistan. Medscape, Medline, PakMedinet and PubMed, was searched, using key words, epidemiology and determinants of cholera infection in Pakistan during 1995 - 2010. Morbidity and mortality due to cholera infection during 1995 - 2010, without any language restriction. Out of 27 articles published between 1995 - 2010, 17 articles were included in the review. Vibrio cholerae O139 identified as a major cause of infection in older age group, while O1 biotype of cholera as a predominant cause of cholera among young individuals. Mainly reported determinants of cholera in Pakistan include poor sanitation and hygiene practices, increased population density in urban areas, leading to rapid and unplanned urbanization of the major cities and climate change due to increased environmental pollution in Pakistan are plausible factors for endemicity of cholera in Pakistan. Cholera reporting as a notifiable disease to the relevant departments and timely action can prevent the risk of outbreaks. There is a need to identify specific behavioral and environmental determinants responsible for outbreaks and epidemics of cholera in Pakistan which can help to design appropriate preventive and control interventions. (author)

  4. Population prospects for Sub-Saharan Africa: determinants, consequences and policy.

    Science.gov (United States)

    Huth, M J

    1986-01-01

    Population projections for nine Sub-Saharan African countries (excluding southern Africa) are reviewed for the period to the year 2020. Consideration is given to the determinants of fertility and to the consequences of rapid population growth. Suggestions for population policies that will resolve population-related development problems are discussed.

  5. 77 FR 38043 - TRICARE; Revised Guideline for Determining the Outpatient Prospective Payment System (OPPS...

    Science.gov (United States)

    2012-06-26

    ... within these private pay norms was chosen as a method to more equitably meet DoD's objectives in making...) Amount AGENCY: Department of Defense (DoD). ACTION: Notice of revised guideline for determining TRICARE's... the methodology to calculate TRICARE's OPPS General TMCPA amount for qualifying hospitals. DATES: The...

  6. Determinants of general practitioner’s cancer related gut feelings - a prospective cohort study.

    NARCIS (Netherlands)

    Donker, G.; Wiersma, E.; Heins, M.

    2016-01-01

    Background: General practitioners (GPs) use gut feelings to diagnose cancer in an early stage, but little is known about its impact. Aim: To explore triggers and GP’s action based on gut feelings, determine the predictive value of gut feelings and how this is influenced by patient and GP

  7. A prospective study to determine the need for physical simulation following virtual simulation

    International Nuclear Information System (INIS)

    Valicenti, R.K.; Waterman, F.M.; Corn, B.W.; Sweet, J.; Curran, W.J.

    1996-01-01

    Purpose: Virtual simulation is CT based planning utilizing computed digitally reconstructed radiographs (DRRs) in a manner similar to conventional fluoroscopic simulation. However, conventional or physical simulation is still widely used to assure precise implementation of the devised plan. To evaluate the need for performing physical simulation, we prospectively studied patients undergoing virtual simulation who either had or did not have a subsequent physical simulation. Materials and Methods: From July, 1995 to February, 1996, 48 patients underwent conformal 4-field radiation therapy for prostate cancer using a commercial grade spiral CT simulator. All patients were immobilized in a foam body cast and positioned by using a fiducial laser marking system. Following prostate and seminal vesicle definition on a slice-by-slice basis, virtual simulation was performed. The isocenter defined by this process was marked on both the patient and the immobilization device before leaving the CT simulator room. The isocenter position of the devised plan was evaluated by three verification methods: physical simulation, first day treatment port filming, and port filming immediately following physical simulation. Simulator radiographs and port films were compared against DRRs for x, y, and z deviations of the isocenter. These deviations were used as a measure of the implementation precision achieved by each verification method. Results: Thirty-seven patients underwent physical simulation and first day port filming. Eleven had first day treatment verification films only and never had a physical simulation. A total of 79 simulator radiographs and 126 first day treatment port films were reviewed. The tabulation of all deviations is as follows: There was significantly more setup error (≥ 5 mm) observed when the devised treatment was implemented in the treatment room as opposed to the physical simulator. The physical simulator did not lead to a significant reduction in setup error

  8. Determinants of pregnant women's compliance with alcohol guidelines: a prospective cohort study

    Directory of Open Access Journals (Sweden)

    Anderson Amy E

    2012-09-01

    Full Text Available Abstract Background In 2009, Australian alcohol guidelines for pregnancy changed from low to no alcohol intake. Previous research found a high proportion of pregnant Australian women drank during pregnancy; however, there has been limited investigation of whether pregnant women comply with 2009 alcohol guidelines. The purpose of this study was to provide an assessment of pregnant women’s compliance with 2009 Australian alcohol guidelines and identify predictors of such compliance, including previous drinking behaviour. Methods Cross-sectional analysis of prospective data from the 1973–1978 cohort of the Australian Longitudinal Study on Women’s Health was conducted. Women aged 30–36 years who were pregnant at the 2009 survey and had data on alcohol use were included (n = 837. Compliance with 2009 alcohol guidelines for pregnancy was defined as no alcohol intake. Predictors of compliance were analysed using multivariate logistic regression, controlling for area of residence, in three separate models to account for multicollinearity between measures of previous alcohol intake (compliance with 2001 guidelines; frequency and quantity; bingeing. Private health insurance, household income, and illicit drug use were entered into all models and retained if significant. Results 72% of pregnant women did not comply with the 2009 alcohol guidelines and 82% of these women drank less than seven drinks per week, with no more than one or two drinks per drinking day. The odds of complying with abstinence increased by a factor of 3.48 (95% CI 2.39-5.05 for women who previously complied with the 2001 alcohol guidelines and decreased by a factor of 0.19 (95% CI 0.08-0.66 if household incomes were $36,400 or more. In other models the odds of complying were lower for women who consumed alcohol before pregnancy at least weekly (OR = 0.40, 95% CI 0.25-0.63 or binged (OR ≥ 0.18, 95% CI 0.10-0.31 and were higher for those who abstained (OR

  9. Determination of turnover and cushion gas volume of a prospected gas storage reservoir under uncertainty

    Energy Technology Data Exchange (ETDEWEB)

    Gubik, A. [RAG-AG Wien (Austria); Baffoe, J.; Schulze-Riegert, R. [SPT Group GmbH, Hamburg (Germany)

    2013-08-01

    Gas storages define a key contribution for building a reliable gas supply chain from production to consumers. In a competitive gas market with short reaction times to seasonal and other gas injection and extraction requirements, gas storages also receive a strong focus on availability and precise prediction estimates for future operation scenarios. Reservoir management workflows are increasingly built on reservoir simulation support for optimizing production schemes and estimating the impact of subsurface uncertainties on field development scenarios. Simulation models for gas storages are calibrated to geological data and accurate reproduction of historical production data are defined as a prerequisite for reliable production and performance forecasts. The underlying model validation process is called history matching, which potentially generates alternative simulation models due to prevailing geological uncertainties. In the past, a single basecase reference model was used to predict production capacities of a gas storage. The working gas volume was precisely defined over a contracted plateau delivery and the required cushion gas volume maintains the reservoir pressure during the operation. Cushion and working gas Volume are strongly dependent on reservoir parameters. In this work an existing depleted gas reservoir and the operation target as a gas storage is described. Key input data to the reservoir model description and simulation is reviewed including production history and geological uncertainties based on large well spacing, limited core and well data and a limited seismic resolution. Target delivery scenarios of the prospected gas storage are evaluated under uncertainty. As one key objective, optimal working gas and cushion gas volumes are described in a probabilistic context reflecting geological uncertainties. Several work steps are defined and included in an integrated workflow design. Equiprobable geological models are generated and evaluated based on

  10. Determination of lead, iron and nickel in water and vegetable samples after preconcentration with aspergillus niger loaded on silica gel

    Energy Technology Data Exchange (ETDEWEB)

    Baytak, Sitki [Harran University, Arts and Science Faculty, Department of Chemistry, Sanliurfa (Turkey); Kocyigit, Abdurrahim [Harran University, Faculty of Medicine, Department of Biochemistry, Sanliurfa (Turkey); Rehber Tuerker, Ali [Gazi University, Arts and Science Faculty, Department of Chemistry, Ankara (Turkey)

    2007-12-15

    A method for the determination of Fe(III), Pb(II), and Ni(II) by flame atomic absorption spectrometry (FAAS) after preconcentrating on a column containing Aspergillus niger loaded on silica gel 60 (Biosorbent) is described. The effect of experimental parameters such as pH, flow rate of sample solution, and volume of sample solution were investigated on the recovery of the analytes. The effect of interfering ions on the recovery of the analytes has also been investigated. Recoveries of Fe(III), Pb(II), and Ni(II) were (98 {+-} 2), (98 {+-} 3), (99 {+-} 2)% at the 95% confidence level, respectively. For the analytes, 50-fold preconcentration was obtained. The analytical detection limits for Fe(III), Pb(II), and Ni(II) were 1.7, 5.2, and 1.6 ng/mL, respectively. The proposed method was applied to the determination of trace metals in various water and vegetable samples. The analytes have been determined with relative error lower than 7%. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

  11. Prospects for asteroid mass determination from close encounters between asteroids: ESA's Gaia space mission and beyond

    Science.gov (United States)

    Ivantsov, Anatoliy; Hestroffer, Daniel; Eggl, Siegfried

    2018-04-01

    We present a catalog of potential candidates for asteroid mass determination based on mutual close encounters of numbered asteroids with massive perturbers (D>20 km). Using a novel geometric approach tuned to optimize observability, we predict optimal epochs for mass determination observations. In contrast to previous studies that often used simplified dynamical models, we have numerically propagated the trajectories of all numbered asteroids over the time interval from 2013 to 2023 using relativistic equations of motion including planetary perturbations, J2 of the Sun, the 16 major asteroid perturbers and the perturbations due to non-sphericities of the planets. We compiled a catalog of close encounters between asteroids where the observable perturbation of the sky plane trajectory is greater than 0.5 mas so that astrometric measurements of the perturbed asteroids in the Gaia data can be leveraged. The catalog v1.0 is available at ftp://dosya.akdeniz.edu.tr/ivantsov.

  12. Prospects for determination of thermal history after inflation with future gravitational wave detectors

    International Nuclear Information System (INIS)

    Kuroyanagi, Sachiko; Nakayama, Kazunori; Saito, Shun

    2011-01-01

    Thermal history of the Universe between inflation and big-bang nucleosynthesis has not yet been revealed observationally. It will be probed by the detection of primordial gravitational waves generated during inflation, which contain information on the reheating temperature as well as the equation of state of the Universe after inflation. Based on the Fisher information formalism, we examine how accurately the tensor-to-scalar ratio and reheating temperature after inflation can be simultaneously determined with space-based gravitational wave detectors such as the DECI-hertz Interferometer Gravitational-wave Observatory and the Big-Bang Observer. We show that the reheating temperature is best determined if it is around 10 7 GeV for tensor-to-scalar ratio of around 0.1, and explore the detectable parameter space. We also find that equation of state of the early Universe can be also determined accurately enough to distinguish different equation-of-state parameters if the inflationary gravitational waves are successfully detected. Thus, future gravitational wave detectors provide a unique and promising opportunity to reveal the thermal history of the Universe around 10 7 GeV.

  13. Spontaneous abortion: a prospective cohort study of younger women from the general population in Denmark. Validation, occurrence and risk determinants

    DEFF Research Database (Denmark)

    Buss, L; Tolstrup, J; Munk, C

    2006-01-01

    -based prospective cohort study comprising 11,088 women and data from a linkage of the cohort with the Hospital Discharge Register to compare spontaneous abortions as reported in the interview with those identified in the register. Based on interview data, we estimated the rate of spontaneous abortion during the two......-year follow-up. Finally, risk determinants for incident spontaneous abortion were analyzed by means of logistic regression. RESULTS: A total of 654 spontaneous abortions before enrolment in the study were reported by the women compared to 531 abortions found in the register. More than 80% of the spontaneous...... abortions identified from both sources were recorded in the same year. During follow-up a total of 20.9% of pregnancies intended to be carried to term ended as a spontaneous abortion. In the risk factor analysis, we found that previous spontaneous abortion, being single, never having used oral...

  14. Determination of risk zones, due to radon : prospecting and analysis of spring water in Wallonia

    International Nuclear Information System (INIS)

    1990-01-01

    The emanation of radon from geologic formations can be detected by analyzing the ground water at the emergence of springs. Two measuring methods are described and compared : the Lucas method and the liquid scintillation method. Although more sampling has to be done, a first conclusion can be drawn from the results. The link between the radium concentration in some geologic formations and the determination of risk zones for radon contamination can be proved through radon measurements in water. 9 figs., 6 tabs., 2 charts (H.E.)

  15. DETERMINANTS OF SMALLHOLDERS’ PREFERENCE TO HYBRIDS – PROSPECT FOR UPGRADING TO HIGH-VALUE FOOD CHAINS

    Directory of Open Access Journals (Sweden)

    Abebe Ejigu Alemu

    2016-09-01

    Full Text Available Hybrid coordination systems (marketing cooperatives and contracts are in place in agriculture to link smallholder farmers to the global agri-food value chains. With the framework of transaction cost economics, this study, however, is particularly designed to investigate the key determinants pushing dairy farmers to hybrids (marketing cooperatives and contracts, viz. spot market channels in the local food chains. A household survey of 415 smallholder dairy farmers was designed. Data collection was administered using trained enumerators. A multinomial logistic regression model was employed to analyze data and to identify the signifi cant determinants. The results indicate that high transaction costs and resource constraints were found driving farmers to cooperative engagement and contracts, implying that hybrids were found to be a solution to farmers’ constraints of access to information and institutional absence, as well as resource constraints. Policy makers and development partners are advised to strengthen cooperative societies and contract enforcement mechanisms. Providing information and resources to increase smallholders’ capacity with resources appear to be interventions which will enable the agricultural marketing system to properly function by serving smallholders in linking to the global food chains.

  16. Automatic determination of pressurized water reactor core loading patterns which maximize end-of-cycle reactivity within power peaking and burnup constraints

    International Nuclear Information System (INIS)

    Hobson, G.H.

    1985-01-01

    An automated procedure for determining the optimal core loading pattern for a pressurized water reactor which maximizes end-of-cycle k/sub eff/ while satisfying constraints on power peaking and discharge burnup has been developed. The optimization algorithm combines a two energy group, two-dimensional coarse-mesh finite difference diffusion theory neutronics model to simulate core conditions, a perturbation theory approach to determine reactivity, flux, power and burnup changes as a function of assembly shuffling, and Monte Carlo integer programming to select the optimal loading pattern solution. The core examined was a typical Cycle 2 reload with no burnable poisons. Results indicate that the core loading pattern that maximizes end-of-cycle k/sub eff/ results in a 5.4% decrease in fuel cycle costs compared with the core loading pattern that minimizes the maximum relative radial power peak

  17. Determinants of prenatal health care utilisation by low-risk women: a prospective cohort study.

    Science.gov (United States)

    Feijen-de Jong, Esther I; Jansen, Danielle E M C; Baarveld, Frank; Boerleider, Agatha W; Spelten, Evelien; Schellevis, François; Reijneveld, Sijmen A

    2015-06-01

    Prenatal health care is pivotal in providing adequate prevention and care to pregnant women. We examined the determinants of inadequate prenatal health care utilisation by low-risk women in primary midwifery-led care in the Netherlands. We used longitudinal data from the population-based DELIVER study with 20 midwifery practices across the Netherlands in 2009 and 2010 as the experimental setting. The participants were 3070 pregnant women starting pregnancy care in primary midwifery care. We collected patient-reported data on potential determinants of prenatal care utilisation derived from the Andersen model. Prenatal health care utilisation was measured by a revised version of the Kotelchuck Index, which measures a combination of care entry and number of visits. Low-risk pregnant women (not referred during pregnancy) were more likely to use prenatal care inadequately if they intended to deliver at a hospital, if they did not use folic acid adequately periconceptionally, or if they were exposed to cigarette smoke during pregnancy. Among those who were referred to secondary care, women reporting a chronic illnesses or disabilities, and women who did not use folic acid periconceptionally were more likely to make inadequate use of prenatal care. Inadequate prenatal health care use in primary midwifery care is more likely in specific groups, and the risk groups differ when women are referred to secondary care. The findings suggest routes that can target interventions to women who are at risk of not adequately using prenatal prevention and care services. Copyright © 2015 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  18. Sex determination of human mandible using metrical parameters by computed tomography: A prospective radiographic short study

    Directory of Open Access Journals (Sweden)

    Basavaraj N Kallalli

    2016-01-01

    Full Text Available Introduction: Sex determination of unidentified human remains is very important in forensic medicine, medicolegal cases, and forensic anthropology. The mandible is the largest and hardest facial bone that commonly resists postmortem damage and forms an important source of personal identification. Additional studies have demonstrated the applicability of facial reconstruction using three-dimensional computed tomography scan (3D-CT for the purpose of individual identification. Aim: To determine the sex of human mandible using metrical parameters by CT. Materials and Methods: The study included thirty subjects (15 males and 15 females, with age group ranging between 10 and 60 years obtained from the outpatient department of Oral Medicine and Radiology, Narsinhbhai Patel Dental College and Hospital. CT scan was performed on all the subjects, and the data obtained were reconstructed for 3D viewing. After obtaining 3D-CT scan, a total of seven mandibular measurements, i.e., gonial angle (G-angle, ramus length (Ramus-L, minimum ramus breadth and gonion-gnathion length (G-G-L, bigonial breadth, bicondylar breadth (BIC-Br, and coronoid length (CO-L were measured; collected data were analyzed using SPSS statistical analysis program by Student's t-test. Results: The result of the study showed that out of seven parameters, G-angle, Ramus-L, G-G-L, BIC-Br, and CO-L showed a significant statistical difference (P < 0.05, with overall accuracy of 86% for males and 82% for females. Conclusion: Personal identification using mandible by conventional methods has already been proved but with variable efficacies. Advanced imaging modalities can aid in personal identification with much higher accuracy than conventional methods.

  19. Determining the impact of wind on system costs via the temporal patterns of load and wind generation

    International Nuclear Information System (INIS)

    Davis, Clay D.; Gotham, Douglas J.; Preckel, Paul V.; Liu, Andrew L.

    2013-01-01

    Ambitious targets have been set for expanding electricity generation from renewable sources, including wind. Expanding wind power impacts needs for other electricity generating resources. As states plan for increasing levels of wind generation in their portfolio of generation resources it is important to consider how this intermittent resource impacts the need for other generation resources. A case study for Indiana estimates the value of wind capacity and demonstrates how to optimize its level and the levels of other generation resources. Changes are driven by temporal patterns of wind power output and load. System wide impacts are calculated for energy, capacity, and costs under multiple wind expansion scenarios which highlight the geographic characteristics of a systems portfolio of wind generation. The impacts of carbon prices, as proposed in the Bingaman Bill, are considered. Finally, calculations showing the effect increasing levels of wind generation will have on end use Indiana retail rates are included. - Highlights: • We estimate the value of wind capacity. • We determine wind generation's impact on the optimal mix of non-wind generation. • Optimal levels of wind and non-wind generation are determined. • We consider the impact of a carbon price on the optimal mix of resources. • The impact of additional wind capacity on Indiana residential rates is calculated

  20. Using of residential load curves obtained for determination of the load diversity, and loading of distribution transformers; Utilizacao de curvas de carga de consumidores industriais medidas para determinacao de diversidade de carga, e carregamento de transformadores de distribuicao

    Energy Technology Data Exchange (ETDEWEB)

    Ferrari, Eduardo Luiz; Jardini, Jose Antonio

    1996-07-01

    This work presents some applications of the residential loads, obtained from measurements conducted by the electric power utilities in the state of Sao Paulo , Brazil. During the first application, curve of coincidence of load peaks occurrence, as function of the number of consumers simultaneously connected to a specific residential distribution transformer. This curve provides a information on the number of consumers presenting coincident load peaks coincident relative to the total numbers of consumers connected to the distribution transformer. Those curves allow to obtain the diversity curves. The second application focused the calculation of the distribution transformer life reduction.

  1. A Prospective Study of the Utility of Magnetic Resonance Imaging in Determining Candidacy for Partial Breast Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Dorn, Paige L.; Al-Hallaq, Hania A.; Haq, Farah; Goldberg, Mira [Department of Radiation and Cellular Oncology, University of Chicago Medical Center, Chicago, Illinois (United States); Abe, Hiroyuki [Department of Radiology, University of Chicago Medical Center, Chicago, Illinois (United States); Hasan, Yasmin [Department of Radiation and Cellular Oncology, University of Chicago Medical Center, Chicago, Illinois (United States); Chmura, Steven J., E-mail: schmura@radonc.uchicago.edu [Department of Radiation and Cellular Oncology, University of Chicago Medical Center, Chicago, Illinois (United States)

    2013-03-01

    Purpose: Retrospective data have demonstrated that breast magnetic resonance imaging (MRI) may change a patient's eligibility for partial breast irradiation (PBI) by identifying multicentric, multifocal, or contralateral disease. The objective of the current study was to prospectively determine the frequency with which MRI identifies occult disease and to establish clinical factors associated with a higher likelihood of MRI prompting changes in PBI eligibility. Methods and Materials: At The University of Chicago, women with breast cancer uniformly undergo MRI in addition to mammography and ultrasonography. From June 2009 through May 2011, all patients were screened prospectively in a multidisciplinary conference for PBI eligibility based on standard imaging, and the impact of MRI on PBI eligibility according to National Surgical Adjuvant Breast and Bowel Project protocol B-39/Radiation Therapy Oncology Group protocol 0413 entry criteria was recorded. Univariable analysis was performed using clinical characteristics in both the prospective cohort and in a separate cohort of retrospectively identified patients. Pooled analysis was used to derive a scoring index predictive of the risk that MRI would identify additional disease. Results: A total of 521 patients were screened for PBI eligibility, and 124 (23.8%) patients were deemed eligible for PBI based on standard imaging. MRI findings changed PBI eligibility in 12.9% of patients. In the pooled univariable analysis, tumor size ≥2 cm on mammography or ultrasonography (P=.02), age <50 years (P=.01), invasive lobular histology (P=.01), and HER-2/neu amplification (P=.01) were associated with a higher likelihood of MRI changing PBI eligibility. A predictive score was generated by summing the number of significant risk factors. Patients with a score of 0, 1, 2, and 3 had changes to eligibility based on MRI findings in 2.8%, 13.2%, 38.1%, and 100%, respectively (P<.0001). Conclusions: MRI identified additional

  2. Self-Determination Of The Kurdes In Syria: Origins, Forms And International Prospects

    Directory of Open Access Journals (Sweden)

    M.E.I.I. Dyurre

    2017-01-01

    Full Text Available The article addresses the problem of self-determination of the Kurdish ethnos in Syria. Kurds are an indigenous people in this territory and for a long time lived within a single space within the Ottoman Empire. The artificial division of the Middle East into states in the interests of European powers led to ignoring the interests and rights of the Kurdish ethnos. Self-organization of Kurds in Syria occurred gradually and mainly under the influence of external factors. The first one was the political activity of Kurds in neighboring countries, the second – the assimilation efforts of the Syrian authorities. Although the Kurdish population, basically, retained its identity, half a century of assimilation policy led to the erosion of the Kurdish ethnic enclaves in the north of the country. Moreover, self-organization and political mobilization of Kurds in Syria began to be accompanied by disagreements and splits of the main political forces. Kurdish political parties sought to act as a “third force” in the course of the civil war in Syria. However, disagreements prevented this, as well as certain pressure from Western countries, which pushed the Syrian Kurds to support the moderate opposition. The power vacuum in the north of Syria was able to fill the center-left party “Democratic Union”. This political force is in contact with the official Syrian authorities and, at the same time, receives US support. Created by the efforts of the “Democratic Union” the Kurdish autonomy in the north of the country provides stability in territories with the Kurdish and mixed populations, and also performs socio-economic functions. This makes the Kurdish autonomy an important element of negotiations about the future political structure of Syria.

  3. Determination of macro and micronutrients and nutritional prospects of six vegetable species of Mardan, Pakistan

    International Nuclear Information System (INIS)

    Sami, F.; Shinwari, Z.K.

    2011-01-01

    This study was carried out to assess the nutritional an d mineral composition of selected vegetables, which are commonly used as food in Pakistan. Abel moschus esculentus, Solanum melongena , Cucurbita moschata, Allium sativum, Momordica charantia and Portulaca oleracea were collected form Mardan (Pakistan) and subjected to nutrient analysis. Nutrient analysis (total proteins, fats, carbohydrates, ash, energy value and moisture contents) of vegetable species were determined according to AOAC methods. Macro viz. calcium (Ca), magnesium (Mg), potassium (K), sodium (Na), and phosphorus (P) and micro viz. iron (Fe), zinc (Zn), manganese (Mn), copper (Cu), nickel (Ni) and selenium (Se) elements were analyzed using Atomic Absorption Spectrometric method. The moisture (wet and dry basis), ash, fats, fibers, proteins, energy value (305.9 - 382.6 Kcal/100 g) and carbohydrates of these vegetable species were found in the range of 62.9 - 92.7, 5.4-7.7, 3.1 - 23.1, 0.3-8.3, 10.2-22.5, 7.7 - 16.9, and 51.3 - 80.2% respectively. The micronutrients including Fe, Zn, Mn, and Cu were found to be in the range, 6.2-24.1, 0.2-11.7, 0.6-16.7, and 0.1-70 ppm respectively. The results of macronutrients obtained having values of Ca (90-1850 ppm), Mg (94-571 ppm), K (2078-4010 ppm), Na (2-170 ppm), and P (250-1532 ppm) respectively. The quantity of Ni and Se were found negligible in these vegetables. The results indicate that all these vegetables have the potential to provide essential nutrients to the human beings. Momordica charantia and Allium sativum were found to be a good source of proteins, fats, carbohydrates, hence capable of providing energy to the consumer. Both these species were found significantly useful in terms of minerals sources, particularly Ni, K, P, Zn, Cu, and Mn. (author)

  4. Full-Field Stress Determination Around Circular Discontinuity in a Tensile-Loaded Plate using x-displacements Only

    Science.gov (United States)

    Baek, Tae Hyun; Chung, Tae Jin; Panganiban, Henry

    The significant effects of stress raisers demand well-defined evaluation techniques to accurately determine the stress along the geometric boundary. A simple and accurate method for the determination of stress concentration around circular geometric discontinuity in a tensile-loaded plate is illustrated. The method is based on the least-squares technique, mapping functions, and a complex power series representation (Laurent series) of the stress functions for the calculation of tangential stress around the hole. Traction-free conditions were satisfied at the geometric discontinuity using conformal mapping and analytic continuation. In this study, we use only a relatively small amount of x-component displacement data of points away from the discontinuity of concern with their respective coordinates. Having this information we can easily obtain full-field stresses at the edge of the geometric discontinuity. Excellent results were obtained when the number of terms of the power series expansions, m=1. The maximum stress concentration calculation results using the present method and FEM using ANSYS agree well by less than one per cent difference. Experimental advantage of the method underscores the use of relatively small amount of data which are conveniently determined being away from the edge. Moreover, the small amount of measured input data needed affords the approach suitable for applications such as the multi-parameter concept used to obtain stress intensity factors from measured data. The use of laser speckle interferometry and moiré interferometry are also potential future related fields since the optical system for one-directional measurement is much simple.

  5. Advanced hyphenated chromatographic-mass spectrometry in mycotoxin determination: current status and prospects.

    Science.gov (United States)

    Li, Peiwu; Zhang, Zhaowei; Hu, Xiaofeng; Zhang, Qi

    2013-01-01

    Mass spectrometric techniques are essential for advanced research in food safety and environmental monitoring. These fields are important for securing the health of humans and animals, and for ensuring environmental security. Mycotoxins, toxic secondary metabolites of filamentous fungi, are major contaminants of agricultural products, food and feed, biological samples, and the environment as a whole. Mycotoxins can cause cancers, nephritic and hepatic diseases, various hemorrhagic syndromes, and immune and neurological disorders. Mycotoxin-contaminated food and feed can provoke trade conflicts, resulting in massive economic losses. Risk assessment of mycotoxin contamination for humans and animals generally depends on clear identification and reliable quantitation in diversified matrices. Pioneering work on mycotoxin quantitation using mass spectrometry (MS) was performed in the early 1970s. Now, unambiguous confirmation and quantitation of mycotoxins can be readily achieved with a variety hyphenated techniques that combine chromatographic separation with MS, including liquid chromatography (LC) or gas chromatography (GC). With the advent of atmospheric pressure ionization, LC-MS has become a routine technique. Recently, the co-occurrence of multiple mycotoxins in the same sample has drawn an increasing amount of attention. Thus, modern analyses must be able to detect and quantitate multiple mycotoxins in a single run. Improvements in tandem MS techniques have been made to achieve this purpose. This review describes the advanced research that has been done regarding mycotoxin determination using hyphenated chromatographic-MS techniques, but is not a full-circle survey of all the literature published on this topic. The present work provides an overview of the various hyphenated chromatographic-MS-based strategies that have been applied to mycotoxin analysis, with a focus on recent developments. The use of chromatographic-MS to measure levels of mycotoxins, including

  6. A prospective study to determine the costs incurred by families of children newly diagnosed with cancer in Ontario.

    Science.gov (United States)

    Tsimicalis, Argerie; Stevens, Bonnie; Ungar, Wendy J; McKeever, Patricia; Greenberg, Mark; Agha, Mohammad; Guerriere, Denise; Barr, Ronald; Naqvi, Ahmed; Moineddin, Rahim

    2012-10-01

    A diagnosis of cancer in childhood places a considerable economic burden on families, although costs are not well described. The objectives of this study were to identify and determine independent predictors of the direct and time costs incurred by such families. A prospective, cost-of-illness study was conducted in families of children newly diagnosed with cancer. Parents recorded the resources consumed and costs incurred during 1 week per month for three consecutive months beginning the fourth week following diagnosis and listed any additional costs incurred since then. Descriptive and multiple regression analyses were performed to describe families' costs (expressed in 2007 Canadian dollars) and to determine direct and time cost predictors. In total, 28 fathers and 71 mothers participated. The median total direct and time costs in 3 months were $CAD3503 and $CAD23 130, respectively, per family. The largest component of direct costs was travel and of time costs was time allocated previously for unpaid activities. There were no statistically significant predictors of direct costs. Six per cent of the variance for time costs was explained by language spoken at home. Families of children with cancer are confronted with a wide range of direct and time costs, the largest being travel and time allocated previously for unpaid activities. Copyright © 2011 John Wiley & Sons, Ltd.

  7. Prospects for an energy determination of the {sup 229m}Th nuclear isomer via IC electrons

    Energy Technology Data Exchange (ETDEWEB)

    Seiferle, B.; Wense, L. v.d.; Thirolf, P.G. [LMU Muenchen, Garching (Germany); Laatiaoui, M. [GSI, Darmstadt (Germany); Helmholtz Institut Mainz, Mainz (Germany)

    2016-07-01

    Of all known nuclear excited states, the isomeric first excited state of {sup 229}Th possesses the lowest excitation energy reported to be E{sup *}=7.6(5) eV (=163(11) nm). This opens up the possibility to drive the transition with a laser and makes {sup 229m}Th an interesting candidate for future developments linking nuclear and atomic physics, such as a nuclear optical clock or a nuclear γ-ray laser. Still, for a direct laser excitation, the knowledge on the energy and half-life of the isomer is not precise enough. In this work and for the expected transition energy, neutral {sup 229}Th decays via the emission internal conversion (IC) electrons with an energy of 1.2 eV (i.e. difference between E* and the 1{sup st} ionization potential). A {sup 233}U α-recoil source is placed in a buffer-gas stopping cell. {sup 229}Th ions, of which 2% are in the isomeric state are recoiled out of the source. RF- and DC electrode structures form an ion beam out of all the recoil ions. Afterwards, {sup 229(m)}Th ions are separated from other short-lived daughter isotopes with a quadrupole mass separator and can be prepared for further experiments. The poster gives prospects for an energy determination of the IC electrons emitted during the decay of the isomer and for a corresponding half-life determination with this experimental setup.

  8. Cathodic stripping voltammetric determination of chromium in coastal waters on cubic Nano-titanium carbide loaded gold nanoparticles modified electrode

    Directory of Open Access Journals (Sweden)

    Haitao eHan

    2015-09-01

    Full Text Available The novel cubical nano-titanium carbide loaded gold nanoparticles modified electrode for selective and sensitive detection of trace chromium (Cr in coastal water was established based on a simple approach. Nano-titanium carbide is used as the typical cubical nanomaterial with wonderful catalytic activity towards the reduction of Cr(VI. Gold nanoparticles with excellent physical and chemical properties can facilitate electron transfer and enhance the catalytic activity of the modified electrode. Taking advantage of the synergistic effects of nano-titanium carbide and gold nanoparticles, the excellent cathodic signal responses for the stripping determination of Cr(VI can be obtained. The detection limit of this method is calculated as 2.08 μg L-1 with the linear calibration curve ranged from 5.2 to 1040 μg L-1. This analytical method can be used to detect Cr(VI effectively without using any complexing agent. The fabricated electrode was successfully applied for the detection of chromium in coastal waters collected from the estuary giving Cr concentrations between 12.48 and 22.88 μg L-1 with the recovery between 96% and 105%.

  9. The determination of load-time curve for a reactor containment which undergoes the impact of an airplane

    International Nuclear Information System (INIS)

    Wang Yuangong; Yu Aiping

    1991-01-01

    It is apparent that there exist some differences between the rigid load function of a reactor containment and the verified load function for undisturbed zone of deformative target when they undergo the impact of an airplane. The local non-linear behavior of impact zone is considered in the later situation, and a modified and better load function is obtained, which gives a value of the dynamic response of the structure 30% to 50% lower. In order to make engineering design more convenient and to simplify the calculation of non-linear behavior of the local zone, and based on the verified load function, several polygonal approximate curves are suggested for calculating the load functions of some typical structures

  10. Determinants and causes of neonatal mortality in Jimma Zone, Southwest Ethiopia: a multilevel analysis of prospective follow up study.

    Directory of Open Access Journals (Sweden)

    Gurmesa Tura Debelew

    Full Text Available BACKGROUND: Ethiopia is among the countries with the highest neonatal mortality with the rate of 37 deaths per 1000 live births. In spite of many efforts by the government and other partners, non-significant decline has been achieved in the last 15 years. Thus, identifying the determinants and causes are very crucial for policy and program improvement. However, studies are scarce in the country in general and in Jimma zone in particular. OBJECTIVE: To identify the determinants and causes of neonatal mortality in Jimma Zone, Southwest Ethiopia. METHODS: A prospective follow-up study was conducted among 3463 neonates from September 2012 to December 2013. The data were collected by interviewer-administered structured questionnaire and analyzed by SPSS V.20.0 and STATA 13. Verbal autopsies were conducted to identify causes of neonatal death. Mixed-effects multilevel logistic regression model was used to identify determinants of neonatal mortality. RESULTS: The status of neonatal mortality rate was 35.5 (95%CI: 28.3, 42.6 per 1000 live births. Though significant variation existed between clusters in relation to neonatal mortality, cluster-level variables were found to have non-significant effect on neonatal mortality. Individual-level variables such as birth order, frequency of antenatal care use, delivery place, gestation age at birth, premature rupture of membrane, complication during labor, twin births, size of neonate at birth and neonatal care practice were identified as determinants of neonatal mortality. Birth asphyxia (47.5%, neonatal infections (34.3% and prematurity (11.1% were the three leading causes of neonatal mortality accounting for 93%. CONCLUSIONS: This study revealed high status of neonatal mortality in the study area. Higher-level variables had less importance in determining neonatal mortality. Individual level variables related to care during pregnancy, intra-partum complications and care, neonatal conditions and the immediate

  11. Effect of macronutrients and fiber on postprandial glycemic responses and meal glycemic index and glycemic load value determinations123

    Science.gov (United States)

    Meng, Huicui; Matthan, Nirupa R; Ausman, Lynne M; Lichtenstein, Alice H

    2017-01-01

    Background: The potential confounding effect of different amounts and proportions of macronutrients across eating patterns on meal or dietary glycemic index (GI) and glycemic load (GL) value determinations has remained partially unaddressed. Objective: The study aimed to determine the effects of different amounts of macronutrients and fiber on measured meal GI and GL values. Design: Four studies were conducted during which participants [n = 20–22; women: 50%; age: 50–80 y; body mass index (in kg/m2): 25–30)] received food challenges containing different amounts of the variable nutrient in a random order. Added to the standard 50 g available carbohydrate from white bread was 12.5, 25, or 50 g carbohydrate; 12.5, 25, or 50 g protein; and 5.6, 11.1, or 22.2 g fat from rice cereal, tuna, and unsalted butter, respectively, and 4.8 or 9.6 g fiber from oat cereal. Arterialized venous blood was sampled for 2 h, and measured meal GI and GL and insulin index (II) values were calculated by using the incremental area under the curve (AUCi) method. Results: Adding carbohydrate to the standard white-bread challenge increased glucose AUCi (P < 0.0001), measured meal GI (P = 0.0066), and mean GL (P < 0.0001). Adding protein (50 g only) decreased glucose AUCi (P = 0.0026), measured meal GI (P = 0.0139), and meal GL (P = 0.0140). Adding fat or fiber had no significant effect on these variables. Adding carbohydrate (50 g), protein (50 g), and fat (11.1 g) increased the insulin AUCi or II; fiber had no effect. Conclusions: These data indicate that uncertainty in the determination of meal GI and GL values is introduced when carbohydrate-containing foods are consumed concurrently with protein (equal amount of carbohydrate challenge) but not with carbohydrate-, fat-, or fiber-containing foods. Future studies are needed to evaluate whether this uncertainty also influences the prediction of average dietary GI and GL values for eating patterns. This trial was registered at

  12. Effect of macronutrients and fiber on postprandial glycemic responses and meal glycemic index and glycemic load value determinations.

    Science.gov (United States)

    Meng, Huicui; Matthan, Nirupa R; Ausman, Lynne M; Lichtenstein, Alice H

    2017-04-01

    Background: The potential confounding effect of different amounts and proportions of macronutrients across eating patterns on meal or dietary glycemic index (GI) and glycemic load (GL) value determinations has remained partially unaddressed. Objective: The study aimed to determine the effects of different amounts of macronutrients and fiber on measured meal GI and GL values. Design: Four studies were conducted during which participants [ n = 20-22; women: 50%; age: 50-80 y; body mass index (in kg/m 2 ): 25-30)] received food challenges containing different amounts of the variable nutrient in a random order. Added to the standard 50 g available carbohydrate from white bread was 12.5, 25, or 50 g carbohydrate; 12.5, 25, or 50 g protein; and 5.6, 11.1, or 22.2 g fat from rice cereal, tuna, and unsalted butter, respectively, and 4.8 or 9.6 g fiber from oat cereal. Arterialized venous blood was sampled for 2 h, and measured meal GI and GL and insulin index (II) values were calculated by using the incremental area under the curve (AUC i ) method. Results: Adding carbohydrate to the standard white-bread challenge increased glucose AUC i ( P < 0.0001), measured meal GI ( P = 0.0066), and mean GL ( P < 0.0001). Adding protein (50 g only) decreased glucose AUC i ( P = 0.0026), measured meal GI ( P = 0.0139), and meal GL ( P = 0.0140). Adding fat or fiber had no significant effect on these variables. Adding carbohydrate (50 g), protein (50 g), and fat (11.1 g) increased the insulin AUC i or II; fiber had no effect. Conclusions: These data indicate that uncertainty in the determination of meal GI and GL values is introduced when carbohydrate-containing foods are consumed concurrently with protein (equal amount of carbohydrate challenge) but not with carbohydrate-, fat-, or fiber-containing foods. Future studies are needed to evaluate whether this uncertainty also influences the prediction of average dietary GI and GL values for eating patterns. This trial was registered at

  13. Correlation between viral loads of cytomegalovirus in blood and bronchoalveolar lavage specimens from lung transplant recipients determined by histology and immunohistochemistry.

    Science.gov (United States)

    Chemaly, Roy F; Yen-Lieberman, Belinda; Castilla, Elias A; Reilly, Amy; Arrigain, Susana; Farver, Carol; Avery, Robin K; Gordon, Steven M; Procop, Gary W

    2004-05-01

    Cytomegalovirus (CMV) is an important pathogen in lung transplant recipients. Early detection of CMV end-organ disease should help with treatment management. We determined the CMV viral load by hybrid capture in bronchoalveolar lavage (BAL) fluid samples from patients who had undergone lung transplantation. For 39 of these samples (from 25 patients), corresponding transbronchial biopsy samples were available for CMV immunohistochemistry (IHC). The CMV IHC results were interpreted and categorized as positive or negative, and the positive results were subcategorized as typical if cells with both significant nuclear enlargement or Cowdry A-type inclusions and positive staining were present or as atypical if definitive nuclear staining was seen but significant nuclear enlargement was not. Diagnostic CMV viral inclusions were reported in the anatomic diagnosis, based on hematoxylin-eosin staining alone, for three (8%) of the biopsy samples. CMV was detected by IHC in 13 (33%) samples (5 typical, 8 atypical). The median CMV viral load in BAL samples was 0 copies/ml for BAL samples from patients with IHC-negative biopsy samples; 47,678 copies/ml for BAL samples from patients with biopsy samples with positive, atypical staining; and 1,548,827 copies/ml for BAL samples from patients with biopsy samples with positive, typical staining (P < 0.001). Compared to routine pathology of biopsy samples, the use of IHC increased the diagnostic yield of CMV. Also, the CMV viral load in BAL fluid samples increased along with immunoreactivity from negative to positive, atypical staining to positive, typical staining. The CMV viral load determined with the end-organ sample, the BAL fluid sample, was higher than the corresponding viral load determined with blood. Both IHC and determination of the CMV viral load in BAL samples may be useful for the detection of individuals at risk for the development of fulminant invasive CMV disease.

  14. Timing and Determinants of the Introduction of Complementary Foods in Kuwait: Results of a Prospective Cohort Study.

    Science.gov (United States)

    Scott, Jane A; Dashti, Manal; Al-Sughayer, Mona; Edwards, Christine A

    2015-08-01

    The early introduction of complementary foods is common in Middle Eastern countries but little is known about the determinants of this practice in this region. This prospective cohort study conducted from October 2007 to October 2008 investigated the determinants of the very early (before 17 weeks) introduction of complementary foods in Kuwait and compared rates of this practice against rates reported in the mid-1990s. A total of 373 women were recruited from maternity hospitals in Kuwait City and followed to 26 weeks postpartum. Data on complementary feeding practices were available from 303 women. Multivariate logistic regression was used to estimate the association of very early introduction of complementary foods with infant sex and maternal characteristics including age, years of education, employment intentions at 6 months postpartum, parity, prepregnancy body mass index, and prepregnancy smoking status. All infants had received complementary foods by 26 weeks of age, with 30.4% receiving complementary foods before 17 weeks of age. Women born in other Arabic countries were less likely to introduce complementary foods before 17 weeks (adjusted odds ratio [adj OR] = 0.40; 95% confidence interval [CI], 0.22-0.73) than women born in Kuwait. Women who were exclusively formula feeding at 6 weeks postpartum were less likely to introduce complementary foods before 17 weeks (adj OR = 0.40; 95% CI, 0.23-0.71) than women who were still breastfeeding. Compared to the mid-1990s, fewer infants in Kuwait were receiving complementary foods before 17 weeks. Nevertheless, all infants had received complementary foods by 6 months of age. © The Author(s) 2015.

  15. The state-of-the-art and prospects of the oxidation titration method for the determination of uranium in geological samples

    International Nuclear Information System (INIS)

    Sun Jiayan

    1986-01-01

    The state-of-the-art of the oxidation titration method for the determination of uranium in geological samples is reviewed in some respects such as the prereduction of U(VI), oxidation of U(IV) and the detection of the end-point. Comments are also made on the prospects of further improvements of this method

  16. Development of a volumetric Analysis method to determine uranium in the loaded phosphoric acid and the loaded organic phase (DEHPA/TOPO)

    International Nuclear Information System (INIS)

    Shlewit, H.; Koudsi, Y.

    2003-01-01

    Rapid and reliable volumetric analysis method has been developed to determine uranium, on line, at uranium extraction unit from wet-process phosphoric acid, in aqueous and organic phases. This process enable up 300 mg of uranium to be determined in the presence of nitric acid, in a sample volume of up to at least 10 ml. The volume of the sample, the amounts of reagents added, the temperature of the reagents and the standing time of various stages were investigated to ensure that the conditions selected for the final procedure were reasonably non-critical

  17. Efficacy of standard (SLA) and modified sandblasted and acid-etched (SLActive) dental implants in promoting immediate and/or early occlusal loading protocols: a systematic review of prospective studies.

    Science.gov (United States)

    Chambrone, Leandro; Shibli, Jamil Awad; Mercúrio, Carlos Eduardo; Cardoso, Bruna; Preshaw, Philip M

    2015-04-01

    To assess the survival percentage, clinical and radiographic outcomes of sandblasted and acid-etched (SLA) dental implants and its modified surface (SLActive) in protocols involving immediate and early occlusal loading. MEDLINE, EMBASE and the Cochrane Oral Health Group's Trials Register CENTRAL were searched in duplicate up to, and including, June 2013 to include randomised controlled trials (RCTs) and prospective observational studies of at least 6-month duration published in all languages. Studies limited to patients treated with SLA and/or SLActive implants involving a treatment protocol describing immediate and early loading of these implants were eligible for inclusion. Data on clinical and/or radiographic outcomes following implant placement were considered for inclusion. Of the 447 potentially eligible publications identified by the search strategy, seven RCTs comprising a total of 853 implants (8% titanium plasma-sprayed, 41.5% SLA and 50.5% SLActive) and 12 prospective observational studies including 1394 SLA and 145 SLActive implants were included in this review. According to the Cochrane Collaboration's tool for assessing risk of bias, one of the studies was considered to be at a low risk of bias, whereas the remaining studies were considered to be at an unclear risk. Regarding the observational studies, all of them presented a medium methodological quality based on the Modified Newcastle-Ottawa scale. There were no significant differences reported in the studies in relation to implant loss or clinical parameters between the immediate/early loading and delayed loading protocols. Overall, 95% of SLA and 97% of SLActive implants still survive at the end of follow-up. Despite of the positive findings achieved by the included studies, few RCTs were available for analysis for SLActive implants. Study heterogeneity, scarcity of data and the lack of pooled estimates represent a limitation between studies' comparisons and should be considered when interpreting

  18. Stroke mortality and its determinants in a resource-limited setting: A prospective cohort study in Yaounde, Cameroon.

    Science.gov (United States)

    Nkoke, Clovis; Lekoubou, Alain; Balti, Eric; Kengne, Andre Pascal

    2015-11-15

    About three quarters of stroke deaths occur in developing countries including those in sub-Saharan African. Short and long-term stroke fatality data are needed for health service and policy formulation. We prospectively followed up from stroke onset, 254 patients recruited from the largest reference hospitals in Yaounde (Cameroon). Mortality and determinants were investigated using the accelerated failure time regression analysis. Stroke mortality rates at one-, six- and 12 months were respectively 23.2% (Ischemic strokes: 20.4%, hemorrhagic strokes: 26.1%, and undetermined strokes: 34.8, p=0.219), 31.5% (ischemic strokes: 31.5%, hemorrhagic strokes: 30.4%, and undetermined strokes: 34.8%, p=0.927), and 32.7% (ischemic strokes: 32.1%, hemorrhagic strokes: 30.4%, undetermined strokes: 43.5%, p=0.496). Fever, swallowing difficulties, and admission NIHSS independently predicted mortality at one month, six and 12 months. Elevated systolic blood pressure (BP) predicted mortality at one month. Elevated diastolic blood pressure was a predictor of mortality at one month in participants with hemorrhagic stroke. Low hemoglobin level on admission only predicted long term mortality. In this resource-limited setting, post-stroke mortality was high with 1 out of 5 deaths occurring at one month and up to 30% deaths at six and twelve months after the index event. Fever, stroke severity, elevated BP and anemia increased the risk of death. Our findings add to the body of evidence for the poor outcome after stroke in resource limited environments. Copyright © 2015 Elsevier B.V. All rights reserved.

  19. A non-linear association between self-reported negative emotional response to stress and subsequent allostatic load: prospective results from the Whitehall II cohort study.

    Science.gov (United States)

    Dich, Nadya; Doan, Stacey N; Kivimäki, Mika; Kumari, Meena; Rod, Naja Hulvej

    2014-11-01

    Previous research suggests that high levels of negative emotions may affect health. However, it is likely that the absence of an emotional response following stressful events may also be problematic. Accordingly, we investigated whether a non-linear association exists between negative emotional response to major life events and allostatic load, a multisystem indicator of physiological dysregulation. Study sample was 6764 British civil service workers from the Whitehall II cohort. Negative emotional response was assessed by self-report at baseline. Allostatic load was calculated using cardiovascular, metabolic and immune function biomarkers at three clinical follow-up examinations. A non-linear association between negative emotional response and allostatic load was observed: being at either extreme end of the distribution of negative emotional response increased the risk of physiological dysregulation. Allostatic load also increased with age, but the association between negative emotional response and allostatic load remained stable over time. These results provide evidence for a more nuanced understanding of the role of negative emotions in long-term physical health. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. The use of Electronic Speckle Pattern Interferometry (ESPI) to determine the displacements in thin adhesive layers under increasing loads (Posterpresentatie)

    NARCIS (Netherlands)

    Botter, H.; Wijen, H.L.M.; Berg, A. van den; Soetens, F.; Straalen, IJ.J. van; Vlot, A.

    2001-01-01

    Recent developments in hardware and software have allowed traditional speckle pattern. interferom.etry using photographic film to be replaced by digital video CCD cameras and sophisticated analysing software. Real-time in-situ displacement measurement of specimens under static or cyclic loads is now

  1. Parental academic involvement in adolescence, academic achievement over the life course and allostatic load in middle age: a prospective population-based cohort study.

    Science.gov (United States)

    Westerlund, Hugo; Gustafsson, Per E; Theorell, Töres; Janlert, Urban; Hammarström, Anne

    2013-06-01

    Parental involvement in their children's studies, particularly in terms of academic socialisation, has been shown to predict academic achievement, and is thus a candidate modifiable factor influencing life course socioeconomic circumstances. Socioeconomic disadvantage is thought to impact on health over the life course partly by allostatic load, that is, cumulative biological risk. We sought to elucidate the role of parental involvement at age 16 on the life course development of allostatic load. In a population-based cohort (365 women and 352 men, 67% of the eligible participants), we examined the association between parental involvement in their offspring's studies, measured by teacher and pupil ratings at age 16 and an allostatic load index summarising 12 physiological risk markers at age 43. Mediation through life course academic and occupational achievement was assessed by entering school grades, adult educational achievement and socioeconomic position at age 43 in a linear regression analysis in a stepwise manner and testing for mediation. Parental interest in their offspring's studies during the last year of compulsory school-rather than the parent's social class or availability of practical academic support-was found to predict adult allostatic load (β=-0.12, 95% CI -0.20 to -0.05). Further adjustments indicated that academic achievement over the life course mediated a large part of the effect of parental interest on allostatic load. Parental interest in their offspring's studies may have protective effects by decreasing the likelihood of a chain of risk involving low academic achievement, low socioeconomic position and high accumulated physiological stress.

  2. Spatiotemporal Determinants of Urban Leptospirosis Transmission: Four-Year Prospective Cohort Study of Slum Residents in Brazil.

    Directory of Open Access Journals (Sweden)

    José E Hagan

    2016-01-01

    Full Text Available Rat-borne leptospirosis is an emerging zoonotic disease in urban slum settlements for which there are no adequate control measures. The challenge in elucidating risk factors and informing approaches for prevention is the complex and heterogeneous environment within slums, which vary at fine spatial scales and influence transmission of the bacterial agent.We performed a prospective study of 2,003 slum residents in the city of Salvador, Brazil during a four-year period (2003-2007 and used a spatiotemporal modelling approach to delineate the dynamics of leptospiral transmission. Household interviews and Geographical Information System surveys were performed annually to evaluate risk exposures and environmental transmission sources. We completed annual serosurveys to ascertain leptospiral infection based on serological evidence. Among the 1,730 (86% individuals who completed at least one year of follow-up, the infection rate was 35.4 (95% CI, 30.7-40.6 per 1,000 annual follow-up events. Male gender, illiteracy, and age were independently associated with infection risk. Environmental risk factors included rat infestation (OR 1.46, 95% CI, 1.00-2.16, contact with mud (OR 1.57, 95% CI 1.17-2.17 and lower household elevation (OR 0.92 per 10m increase in elevation, 95% CI 0.82-1.04. The spatial distribution of infection risk was highly heterogeneous and varied across small scales. Fixed effects in the spatiotemporal model accounted for the majority of the spatial variation in risk, but there was a significant residual component that was best explained by the spatial random effect. Although infection risk varied between years, the spatial distribution of risk associated with fixed and random effects did not vary temporally. Specific "hot-spots" consistently had higher transmission risk during study years.The risk for leptospiral infection in urban slums is determined in large part by structural features, both social and environmental. Our findings

  3. Determinants of non-vaccination against pandemic 2009 H1N1 influenza in pregnant women: a prospective cohort study.

    Directory of Open Access Journals (Sweden)

    Romain Freund

    Full Text Available BACKGROUND: In October 2009, the French government organized a national-wide, free of charge vaccination campaign against pandemic H1N1 influenza virus, especially targeting pregnant women, a high risk group for severe illness. The study objective was to evaluate pandemic flu vaccine uptake and factors associated with non-vaccination in a population of pregnant women. METHODOLOGY/PRINCIPAL FINDINGS: In a prospective cohort conducted in 3 maternity hospitals in Paris, 882 pregnant women were randomly included between October 12, 2009 and February 3, 2010, with the aim to study characteristics of pandemic influenza during pregnancy. At inclusion, socio-demographic, medical, obstetrical factors and those associated with a higher risk of flu exposition and disease-spreading were systematically collected. Pandemic flu vaccine uptake was checked until delivery. 555 (62.9% women did not get vaccinated. Determinants associated with non-vaccination in a multivariate logistic regression were: geographic origin (Sub-Saharan African origin, adjusted Odd Ratio aOR = 5.4[2.3-12.7], North African origin, aOR = 2.5[1.3-4.7] and Asian origin, aOR = 2.1[1.7-2.6] compared to French and European origin and socio-professional categories (farmers, craftsmen and tradesmen, aOR = 2.3[2.0-2.6], intermediate professionals, aOR = 1.3[1.0-1.6], employees and manual workers, aOR = 2.5[1.4-4.4] compared to managers and intellectual professionals. The probability of not receiving pandemic flu vaccine was lower among women vaccinated against seasonal flu in the previous 5 years (aOR = 0.6[0.4-0.8] and among those who stopped smoking before or early during pregnancy (aOR = 0.6[0.4-0.8]. Number of children less than 18 years old living at home, work in contact with children or in healthcare area, or professional contact with the public, were not associated with a higher vaccine uptake. CONCLUSIONS/SIGNIFICANCE: In this cohort of pregnant women, vaccine coverage against pandemic

  4. Spatiotemporal Determinants of Urban Leptospirosis Transmission: Four-Year Prospective Cohort Study of Slum Residents in Brazil.

    Science.gov (United States)

    Hagan, José E; Moraga, Paula; Costa, Federico; Capian, Nicolas; Ribeiro, Guilherme S; Wunder, Elsio A; Felzemburgh, Ridalva D M; Reis, Renato B; Nery, Nivison; Santana, Francisco S; Fraga, Deborah; Dos Santos, Balbino L; Santos, Andréia C; Queiroz, Adriano; Tassinari, Wagner; Carvalho, Marilia S; Reis, Mitermayer G; Diggle, Peter J; Ko, Albert I

    2016-01-01

    Rat-borne leptospirosis is an emerging zoonotic disease in urban slum settlements for which there are no adequate control measures. The challenge in elucidating risk factors and informing approaches for prevention is the complex and heterogeneous environment within slums, which vary at fine spatial scales and influence transmission of the bacterial agent. We performed a prospective study of 2,003 slum residents in the city of Salvador, Brazil during a four-year period (2003-2007) and used a spatiotemporal modelling approach to delineate the dynamics of leptospiral transmission. Household interviews and Geographical Information System surveys were performed annually to evaluate risk exposures and environmental transmission sources. We completed annual serosurveys to ascertain leptospiral infection based on serological evidence. Among the 1,730 (86%) individuals who completed at least one year of follow-up, the infection rate was 35.4 (95% CI, 30.7-40.6) per 1,000 annual follow-up events. Male gender, illiteracy, and age were independently associated with infection risk. Environmental risk factors included rat infestation (OR 1.46, 95% CI, 1.00-2.16), contact with mud (OR 1.57, 95% CI 1.17-2.17) and lower household elevation (OR 0.92 per 10m increase in elevation, 95% CI 0.82-1.04). The spatial distribution of infection risk was highly heterogeneous and varied across small scales. Fixed effects in the spatiotemporal model accounted for the majority of the spatial variation in risk, but there was a significant residual component that was best explained by the spatial random effect. Although infection risk varied between years, the spatial distribution of risk associated with fixed and random effects did not vary temporally. Specific "hot-spots" consistently had higher transmission risk during study years. The risk for leptospiral infection in urban slums is determined in large part by structural features, both social and environmental. Our findings indicate that

  5. Soil behavior under earthquake loading conditions. In situ impulse test for determination of shear modulus for seismic response analyses. Progress report

    International Nuclear Information System (INIS)

    1974-06-01

    Progress is reported in the determination of the best methods of evaluation and prediction of soil behavior of potential nuclear power plant sites under seismic loading conditions. Results are reported of combined experimental and analytical studies undertaken to continue development of an in situ impulse test for determination of the soil shear modulus. Emphasis of the field work was directed toward making the field measurements at frequent depth intervals and at shear strains in the strong motion earthquake range. Emphasis of the analytical work was aimed toward supporting the field effort through processing and evaluation of the experimental test results combined with additional calculations required to gain insight into data interpretation and the in situ test setup itself. Continuing studies to evaluate free field soil behavior under earthquake loading conditions are discussed. (U.S.)

  6. Crack modelling for the assessment of stiffness loss of reinforced concrete structures under mechanical loading - determination of the permeability of the micro-cracked body

    International Nuclear Information System (INIS)

    Bongue Boma, M.

    2007-12-01

    We propose a model describing the evolution of mechanical and permeability properties of concrete under slow mechanical loading. Calling upon the theory of continua with microstructure, the kinematic of the domain is enriched by a variable characterising size and orientation of the crack field. We call upon configurational forces to deal with crack propagation and we determine the balance equations governing both strain and propagation. The geometry of the microstructure is representative of the porous media: the permeability is obtained from the resolution of Stokes equations in an elementary volume. An example has been treated: we considered simple assumptions (uniform crack field, application of linear fracture mechanics...) and we determined the behaviour of a body under tensile loading. Strain, crack propagation and stiffness loss are completely assessed. Finally the evolution of permeability is plotted: once activated, crack propagation is the main cause of water tightness loss. (author)

  7. Effect of crack blunting in liquid metal environments on K-IEAC determined by the rising load test

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1996-09-01

    Full Text Available of Engineering, University of Cambridge, Trumpington Street, Cambridge CB2 1PZ, U.K. (Received 13 March 1996) KIEAC is the threshold stress intensity below which environmentally assisted crack growth does not occur. This parameter... corrosion conditions has been well documented \\[12\\]. Wheeler et al. \\[13\\] have reported similar results in the case of crack growth in the aluminium-molten mercury system. By changing the loading conditions from fixed...

  8. Immediate loading of mandibular overdentures supported by one-piece, direct metal laser sintering mini-implants: a short-term prospective clinical study.

    Science.gov (United States)

    Mangano, Francesco G; Caprioglio, Alberto; Levrini, Luca; Farronato, Davide; Zecca, Piero A; Mangano, Carlo

    2015-02-01

    Only a few studies have dealt with immediately loaded, unsplinted mini-implants supporting ball attachment-retained mandibular overdentures (ODs). The aim of this study is to evaluate treatment outcomes of ball attachment-retained mandibular ODs supported by one-piece, unsplinted, immediately loaded, direct metal laser sintering (DMLS) mini-implants. Over a 4-year period (2009 to 2012), all patients referred to the Dental Clinic, University of Varese, and to a private practice for treatment with mandibular ODs were considered for inclusion in this study. Each patient received three or four DMLS mini-implants. Immediately after implant placement, a mandibular OD was connected to the implants. At each annual follow-up session, clinical and radiographic parameters were assessed, including the following outcome measures: 1) implant failures; 2) peri-implant marginal bone loss; and 3) complications. Statistical analysis was conducted using a life-table analysis. A total of 231 one-piece DMLS mini-implants were inserted in 62 patients. After 4 years of loading, six implants failed, giving an overall cumulative survival rate of 96.9%. The mean distance between the implant shoulder and the first visible bone-to-implant contact was 0.38 ± 0.25 and 0.62 ± 0.20 mm at the 1- and 4-year follow-up examinations, respectively. An incidence of 6.0% of biologic complications was reported; prosthetic complications were more frequent (12.9%). Within the limits of this study, it can be concluded that the immediate loading of one-piece, unsplinted, DMLS titanium mini-implants by means of ball attachment-supported mandibular ODs is a successful treatment procedure. Long-term follow-up studies are needed to confirm these results.

  9. Determination of the load state of lead-acid batteries using neural networks; Determinacion del estado de carga de baterias plomo-acido utilizando redes neuronales

    Energy Technology Data Exchange (ETDEWEB)

    Cristin V, Miguel A; Ortega S, Cesar A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2005-07-01

    The charge of lead-acid batteries (LAB), as in any other type of batteries, consists of replacing the energy consumed during the discharge. Nevertheless, as no physical or chemical process is good enough to totality recharge a battery, it is necessary to supply to it more than the 100% of the energy demanded during its discharge. A critical factor to make a suitable load control of the batteries is to determine its own state of load. That is to say, to have an efficient load control, it is necessary to count on means that allow to accurately determining the residual capacity of the battery to deliver load. This one is the one of the aspects of greater interest in the research centers around world. For this reason, in this work it was pretended to develop a calculation algorithm of the state of load of batteries based on a fuzzy-neural network that could calculate the state of load without using the battery current as an input. This is because one of the main problems for the designers of battery load controllers is the correct supervision of the current that circulates around the system in all the rank of operation of the same one because the sensors do not have a linear behavior. [Spanish] La recarga de baterias plomo-acido (BPA), como cualquier otro tipo de baterias, consiste en reponer la energia consumida durante la descarga. Sin embargo, como ningun proceso fisico o quimico es lo bastante eficiente para recargar a totalidad una bateria, es necesario suministrarle mas del 100% de la energia demandada durante su descarga. Un factor critico para realizar un adecuado control de carga de las baterias, es determinar su propio estado de carga. Es decir, para tener un control de carga eficiente, es necesario contar con un medio que permita determinar con precision la capacidad remanente de la bateria para entregar carga. Este es uno de los aspectos de mayor interes en los centros de investigacion alrededor el mundo. Por tal razon, en este trabajo se propuso

  10. A geometrical approach to determine reorientation start and continuation conditions in ferromagnetic shape memory alloys considering the effects of loading history

    International Nuclear Information System (INIS)

    Shirani, M; Kadkhodaei, M

    2014-01-01

    Ferromagnetic shape memory alloys (FSMAs) and magnetic shape memory alloys (MSMAs) are metallic alloys that can undergo inelastic responses when exposed to magnetic fields. Several constitutive models have been proposed so far to model the behaviors of FSMAs. In this work, the effects of loading history on reorientation start conditions are considered, and it is shown that reorientation start conditions are not fixed values; rather, they change with respect to the amount of loading history. To consider the effects of loading history on reorientation start conditions, an available phase diagram in stress-field space is generalized to reorientation surfaces in stress-field-loading history space. Correspondingly, kinetic laws are derived in a continuum framework to be used with the reorientation surfaces to determine the amount of the martensitic variant 2 volume fraction. Based on the geometry of the reorientation surfaces, conditions that must be satisfied to ensure the continuation of reorientations are obtained. Available experimental findings validate the proposed model and the reorientation surfaces. (paper)

  11. Endogenous Prospect Theory

    OpenAIRE

    Schmidt, Ulrich; Zank, Horst

    2010-01-01

    In previous models of (cumulative) prospect theory reference-dependence of preferences is imposed beforehand and the location of the reference point is exogenously determined. This paper provides an axiomatization of a new specification of cumulative prospect theory, termed endogenous prospect theory, where reference-dependence is derived from preference conditions and a unique reference point arises endogenously.

  12. Satisfaction and Clinical Outcomes Among Patients with Immediately Loaded Mandibular Overdentures Supported by One or Two Dental Implants: Results of a 5-Year Prospective Randomized Clinical Trial.

    Science.gov (United States)

    Kronstrom, Mats; Davis, Ben; Loney, Robert; Gerrow, Jack; Hollender, Lars

    The purpose of this study was to evaluate patient satisfaction and clinical outcomes among subjects with mandibular overdentures supported by one or two immediately placed dental implants 5 years after loading. Thirty-six subjects (16 men and 20 women) received one or two dental implants in the anterior mandible, and all implants were loaded the day of surgery. Subjects were scheduled for follow-up 3-, 6-, and 12 months after implant placement and thereafter annually for 4 more years. Patient satisfaction scores were measured with the Oral Health Impact Profile-EDENT (OHIPEDENT) questionnaire. Seventeen subjects (7 male and 10 female) with a mean age of 59.4 years (range, 44 to 74 years) were available for the 5-year follow-up examination. Nine subjects with 10 failing implants were excluded during the first year and nine subjects were lost to follow-up. No implants failed between the 12- and 60-month follow-up examinations, and the need for denture maintenance was low. Mean peri-implant bone change was 0.92 mm, and the Spearman test failed to show correlation between the insertion torque value and implant stability quotient. Patient satisfaction scores increased significantly when compared with baseline values and continued to be high for both groups, with no significant differences. Ten implants in nine subjects failed early, but no failures were observed after the 12-month examination. No significant differences were found between subjects in the two groups with respect to implant survival rates and peri-implant bone loss, and patient satisfaction scores continued to be high. Although patient satisfaction and implant success were high during the 12- to 60-month period, the results should be interpreted with caution because of the high number of failing implants and patients lost to follow-up. More research is needed to study outcomes of treatment with immediately loaded mandibular implant overdentures.

  13. Cognitive status is a determinant of health resource utilization among individuals with a history of falls: a 12-month prospective cohort study.

    Science.gov (United States)

    Davis, J C; Dian, L; Khan, K M; Bryan, S; Marra, C A; Hsu, C L; Jacova, P; Chiu, B K; Liu-Ambrose, T

    2016-03-01

    Falls are a costly public health problem worldwide. The literature is devoid of prospective data that identifies factors among fallers that significantly drive health care resource utilization. We found that cognitive function--specifically, executive functions--and cognitive status are significant determinants of health resource utilization among older fallers. Although falls are costly, there are no prospective data examining factors among fallers that drive health care resource utilization. We identified key determinants of health resource utilization (HRU) at 6 and 12 months among older adults with a history of falls. Specifically, with the increasing recognition that cognitive impairment is associated with increased falls risk, we investigated cognition as a potential driver of health resource utilization. This 12-month prospective cohort study at the Vancouver Falls Prevention Clinic (n = 319) included participants with a history of at least one fall in the previous 12 months. Based on their cognitive status, participants were divided into two groups: (1) no mild cognitive impairment (MCI) and (2) MCI. We constructed two linear regression models with HRU at 6 and 12 months as the dependent variables for each model, respectively. Predictors relating to mobility, global cognition, executive functions, and cognitive status (MCI versus no MCI) were examined. Age, sex, comorbidities, depression status, and activities of daily living were included regardless of statistical significance. Global cognition, comorbidities, working memory, and cognitive status (MCI versus no MCI ascertained using the Montreal Cognitive Assessment (MoCA)) were significant determinants of total HRU at 6 months. The number of medical comorbidities and global cognition were significant determinants of total HRU at 12 months. MCI status was a determinant of HRU at 6 months among older adults with a history of falls. As such, efforts to minimize health care resource use related to falls

  14. Chemical fractionation of lake sediments to determine the effects of land-use change on nutrient loading

    Science.gov (United States)

    Heathwaite, A. L.

    1994-07-01

    Lake studies allow contemporary sediment and nutrient dynamics to be placed in a historical context in order that trends and rates of change in catchment inputs may be calculated. Here, a synthesis of the temporal information contained in catchment and lake sediment records is attempted. A chemical fractionation technique is used to isolate the different sediment sources contained in the lake core, and 210Pb dates provide an accurate record of changes in lake sediment sources over the past 100 years. The extent to which land-use records, collated from agricultural census returns, and process-based studies of sediment and nutrient export from different catchment land uses can be used to explain the trends observed in the lake sediments is examined. Sediment influx to the study lake has increased from less than 2 mm year -1 prior to the Second World War to over 10 mm year -1 at present. The source of the sediment is largely unaltered and unweathered allochthonous material eroded from the catchment. Land-use records suggest that the intensification of agriculture, characterized by a shift towards arable land immediately postwar, followed by an increase in the area of temporary grass in the 1960s, may be the cause of accelerated catchment erosion; both land-use changes would have increased the area of ploughed land in the catchment. An increase in the number of cattle and sheep in the catchment from around 2000 and 6000, respectively, in the 1940s, to a peak of nearly 7000 cattle and over 15 000 sheep in the 1980s, provides a further source of sediment and nutrients. Livestock are grazed on permanent grassland which is commonly located on steep hillslopes and in riparian zones where saturation-excess surface runoff may be an important hydrological pathway. Rainfall simulation experiments show that surface runoff from heavily grazed grassland has a high suspended sediment, ammonium-nitrogen and particulate phosphorus load. The combined effect of the long-term increase

  15. Evaluation of the Most Reliable Procedure of Determining Jump Height During the Loaded Countermovement Jump Exercise: Take-Off Velocity vs. Flight Time.

    Science.gov (United States)

    Pérez-Castilla, Alejandro; García-Ramos, Amador

    2018-07-01

    Pérez-Castilla, A and García-Ramos, A. Evaluation of the most reliable procedure of determining jump height during the loaded countermovement jump exercise: Take-off velocity vs. flight time. J Strength Cond Res 32(7): 2025-2030, 2018-This study aimed to compare the reliability of jump height between the 2 standard procedures of analyzing force-time data (take-off velocity [TOV] and flight time [FT]) during the loaded countermovement (CMJ) exercise performed with a free-weight barbell and in a Smith machine. The jump height of 17 men (age: 22.2 ± 2.2 years, body mass: 75.2 ± 7.1 kg, and height: 177.0 ± 6.0 cm) was tested in 4 sessions (twice for each CMJ type) against external loads of 17, 30, 45, 60, and 75 kg. Jump height reliability was comparable between the TOV (coefficient of variation [CV]: 6.42 ± 2.41%) and FT (CV: 6.53 ± 2.17%) during the free-weight CMJ, but it was higher for the FT when the CMJ was performed in a Smith machine (CV: 11.34 ± 3.73% for TOV and 5.95 ± 1.12% for FT). Bland-Altman plots revealed trivial differences (≤0.27 cm) and no heteroscedasticity of the errors (R ≤ 0.09) for the jump height obtained by the TOV and FT procedures, whereas the random error between both procedures was higher for the CMJ performed in the Smith machine (2.02 cm) compared with the free-weight barbell (1.26 cm). Based on these results, we recommend the FT procedure to determine jump height during the loaded CMJ performed in a Smith machine, whereas the TOV and FT procedures provide similar reliability during the free-weight CMJ.

  16. Testing a capacity-load model for hypertension: disentangling early and late growth effects on childhood blood pressure in a prospective birth cohort.

    Directory of Open Access Journals (Sweden)

    Carlos S Grijalva-Eternod

    Full Text Available In 2005, it was estimated that hypertension affected 26.4% of the adult population worldwide. By 2025, it is predicted that it will affect about 60% of adults, a total of 1.56 billion. Both pre- and postnatal growth patterns have been associated with later blood pressure (BP, but in contrasting directions. These inconsistent associations of growth during different developmental periods merit elucidation. We tested a theoretical model treating birth weight as a marker of homeostatic metabolic capacity, and childhood height, lean mass and fat mass as independent indices of metabolic load. We predicted that decreased capacity and increased load would be independently associated with increased BP.Data from the ALSPAC cohort on growth from birth to 7 years, and body composition by dual-energy X-ray absorptiometry and BP at 9 years, were analysed (n = 6579. Data were expressed as standard deviation scores (SDS or standardised regression residuals (SRR. BP was independently and positively associated with each of height, lean mass and fat mass. In a joint model systolic BP was positively associated with conditional weight velocity [males 0.40 (95%CI: 0.37-0.44 & females 0.44 (95%CI: 0.40-0.47 SDS/SRR], but not birth weight [0.00 (95%CI: -0.03-0.04 & 0.03 (95%CI: -0.01-0.07 SDS/SDS]. Adjusting for height, lean mass and fat mass, the association of systolic BP and conditional weight velocity attenuated [0.00(95%CI: -0.09-0.08 & -0.06(95%CI: -0.14-0.03 SDS/SRR], whereas that with birth weight became negative [-0.10 (95%CI: -0.14-0.06 & -0.09 (95%CI: -0.13-0.05 SDS/SDS]. Similar results were obtained for diastolic BP and pulse pressure.Consistent with our theoretical model, high metabolic load relative to metabolic capacity is associated with increased BP. Our data demonstrate the contribution of different growth and body composition components to BP variance, and clarify the developmental aetiology of hypertension.

  17. Immediate Loading of Implants in the Edentulous Maxilla with a Fixed Provisional Restoration without Bone Augmentation: A Report on 5-Year Outcomes Data Obtained from a Prospective Clinical Trial.

    Science.gov (United States)

    Toljanic, Joseph A; Ekstrand, Karl; Baer, Russell A; Thor, Andreas

    2016-01-01

    Successful immediate loading of implants in the edentulous maxilla has been previously reported. The purpose of this 5-year prospective study was to further assess long-term outcomes following immediate loading of implants in the edentulous maxilla with fixed provisional restorations without the use of bone augmentation procedures. Subjects with edentulous maxillary arches each received six implants placed in native bone without augmentation. Where insufficient posterior bone volume existed, angled implant placement was employed. Fixed provisional restorations were delivered within 24 hours of implant placement. Implant placement locations, insertion torque values, and implant dimensions were recorded. Definitive fixed prostheses were placed within 24 weeks following implantation. Baseline implant site marginal bone levels were measured using periapical radiographs. Baseline peri-implant plaque and bleeding scores were obtained. Subjects were examined 6 months after implant placement and then annually for 5 years with follow-up periapical radiographs and plaque/bleeding scores obtained. Fifty-one subjects received a total of 306 implants. Forty subjects with 232 implants returned for the final follow-up appointment representing a 5-year implant survival proportion of 93% with a mean marginal bone loss of 0.44 ± 1.25 mm for this group. Thirty-nine of these 40 subjects continued to function with fixed restorations with the remaining subject functioning with a non-implant-retained removable prosthesis. Within the limitations of this study, predictable long-term implant rehabilitation outcomes were demonstrated for the edentulous maxilla using an immediate loading protocol without bone augmentation.

  18. Determining the platinum loading and distribution of industrial scale polymer electrolyte membrane fuel cell electrodes using low energy X-ray imaging

    DEFF Research Database (Denmark)

    Holst, T.; Vassiliev, Anton; Kerr, R.

    2014-01-01

    Low energy X-ray imaging (E <25 keV) is herein demonstrated to be a rapid, effective and non-destructive tool for the quantitative determination of the platinum loading and distribution over the entire geometric area of gas diffusion electrodes for polymer electrolyte membrane fuel cells. A linea...... of electrodes fabricated using an industrial spraying process. This technique proves to be an attractive option for the electrode performance study, the process optimization and quality control of electrode fabrication on an industrial scale....

  19. Determination of post-shakedown quantities of a pipe bend via the simplified theory of plastic zones compared with load history dependent incremental analysis

    Science.gov (United States)

    Vollrath, Bastian; Hübel, Hartwig

    2018-01-01

    The Simplified Theory of Plastic Zones (STPZ) may be used to determine post-shakedown quantities such as strain ranges and accumulated strains at plastic or elastic shakedown. The principles of the method are summarized. Its practical applicability is shown by the example of a pipe bend subjected to constant internal pressure along with cyclic in-plane bending or/and cyclic radial temperature gradient. The results are compared with incremental analyses performed step-by-step throughout the entire load history until the state of plastic shakedown is achieved.

  20. Work Hardening, Dislocation Structure, and Load Partitioning in Lath Martensite Determined by In Situ Neutron Diffraction Line Profile Analysis

    Science.gov (United States)

    Harjo, Stefanus; Kawasaki, Takuro; Tomota, Yo; Gong, Wu; Aizawa, Kazuya; Tichy, Geza; Shi, Zengmin; Ungár, Tamas

    2017-09-01

    A lath martensite steel containing 0.22 mass pct carbon was analyzed in situ during tensile deformation by high-resolution time-of-flight neutron diffraction to clarify the large work-hardening behavior at the beginning of plastic deformation. The diffraction peaks in plastically deformed states exhibit asymmetries as the reflection of redistributions of the stress and dislocation densities/arrangements in two lath packets: soft packet, where the dislocation glides are favorable, and hard packet, where they are unfavorable. The dislocation density was as high as 1015 m-2 in the as-heat-treated state. During tensile straining, the load and dislocation density became different between the two lath packets. The dislocation character and arrangement varied in the hard packet but hardly changed in the soft packet. In the hard packet, dislocations that were mainly screw-type in the as-heat-treated state became primarily edge-type and rearranged towards a dipole character related to constructing cell walls. The hard packet played an important role in the work hardening in martensite, which could be understood by considering the increase in dislocation density along with the change in dislocation arrangement.

  1. Automatic determination of BWR fuel loading patterns based on K.E. technique with core physics simulation

    International Nuclear Information System (INIS)

    Ikehara, T.; Tsuiki, M.; Takeshita, T.

    1990-01-01

    On the basis oof a computerized search method, a prototype for a fuel loading pattern expert system has been developed to support designers in core design for BWRs. The method was implemented by coupling rules and core physics simulators into an inference engine to establish an automated generate-and-test cycle. A search control mechanism, which prunes paths to be searched and selects appropriate rules through the interaction with the user, was also introduced to accomplish an effective search. The constraints in BWR core design are: (1) cycle length more than L, (2) core shutdown margin more than S, and (3) thermal margin more than T. Here L, S, and T are the specified minimum values. In this system, individual rules contain the manipulation to improve the core shutdown margin explicitly. Other items were taken into account only implicitly. Several applications to the test cases were carried out. It was found that the results were comparable with those obtained by human expert engineers. Broad applicability of the present method in the BWR core design domain was proved

  2. Bacterial structure of aerobic granules is determined by aeration mode and nitrogen load in the reactor cycle.

    Science.gov (United States)

    Cydzik-Kwiatkowska, Agnieszka

    2015-04-01

    This study investigated how the microbial composition of biomass and kinetics of nitrogen conversions in aerobic granular reactors treating high-ammonium supernatant depended on nitrogen load and the number of anoxic phases in the cycle. Excellent ammonium removal and predomination of full nitrification was observed in the reactors operated at 1.1 kg TKN m(-3) d(-1) and with anoxic phases in the cycle. In all reactors, Proteobacteria and Actinobacteria predominated, comprising between 90.14% and 98.59% of OTUs. Extracellular polymeric substances-producing bacteria, such as Rhodocyclales, Xanthomonadaceae, Sphingomonadales and Rhizobiales, were identified in biomass from all reactors, though in different proportions. Under constant aeration, bacteria capable of autotrophic nitrification were found in granules, whereas under variable aeration heterotrophic nitrifiers such as Pseudomonas sp. and Paracoccus sp. were identified. Constant aeration promoted more even bacteria distribution among taxa; with 1 anoxic phase, Paracoccus aminophilus predominated (62.73% of OTUs); with 2 phases, Corynebacterium sp. predominated (65.10% of OTUs). Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Implementation of a constant load method, for determination of crack growth velocities in MEX-03 system of National Institute of Nuclear Research

    International Nuclear Information System (INIS)

    Diaz S, A.; Fuentes C, P.; Merino C, F.

    2009-10-01

    Whit the objective of to complete the existent techniques for susceptibility evaluation to phenomenon of stress corrosion cracking in laboratories of Applied Sciences Area of National Institute of Nuclear Research; was realized and documented the modification of a high pressure and temperature equipment, identified as MEX-03 to carry out the implementation of a growth and crack propagation assay, using a constant load method. The assay was realized to a specimen of stainless steel AISI 304l type CT of an inch, which was previously thermally sensitize, simulating the typical degradation of this materials type below operation conditions in a BWR. The MEX-03 system, consist from an annexed auto key to a load system which originally was controlled by displacement; therefore were carried out modifications to achieve the control by load. The realized adjustments allowed to maintain a constant load during all the experiment, and as much the temperature conditions (T = 288 C) as of pressure (P = 8 Mpa) were controlled during the assay realization. The steel was exposed to a conditioned ambient with hydrogen gas addition; simulating a well-known alternative chemistry as hydrogen water chemistry that is used to mitigate the phenomenon of stress corrosion cracking, main degradation mechanism of austenitic stainless steels. The continuation of the crack behavior was realized by means of electric potential fall technique and later was validated of visual form through the fractographic analysis of cracked surface. The modification and control of equipment for realization of this experiment is necessary, for what should be carried out new assays, whose results will allow to establish the effect of dynamic and static methods in velocity determination of crack growth to laboratory level; to be considered in the existent models of crack propagation in systems and components in operation. (Author)

  4. Determinants of Physical Activity in Patients with Chronic Obstructive Pulmonary Disease: A 5-Year Prospective Follow-Up Study

    NARCIS (Netherlands)

    Yu, Tsung; Frei, Anja; ter Riet, Gerben; Puhan, Milo A.

    2016-01-01

    Although many studies examined determinants of physical activity in patients with chronic obstructive pulmonary disease (COPD), most were cross-sectional and focused on single determinants only. The aim of this study was to determine how COPD patients' physical activity changes over time and to

  5. CD4 and viral load dynamics in antiretroviral-naive HIV-infected adults from Soweto, South Africa: a prospective cohort.

    Directory of Open Access Journals (Sweden)

    Neil A Martinson

    Full Text Available BACKGROUND: CD4 count is a proxy for the extent of immune deficiency and declines in CD4 count are a measure of disease progression. Decline in CD4 count is an important component: for estimating benefits of ARV treatment; for individual level counselling on the rapidity of untreated disease progression and prognosis; and can be used in planning demand for health services. Our objective is to report CD4 decline and changes in viral load (VL in a group of HIV-infected adults enrolled in a randomized trial of preventive treatment for TB in South Africa where clade C infection predominates. METHODS: HIV-infected, tuberculin skin test positive adults who were not eligible for antiretroviral (ARV treatment were randomized to a trial of preventive treatment from 2003-2005. VL and CD4 count were assessed at enrollment and CD4 counts repeated at least annually. During follow-up, individuals whose CD4 counts decreased to 100,000 (N = 122 copies/ml. CONCLUSIONS: Our data suggests that six and a half years will elapse for an individual's CD4 count to decline from 750 to 350 cells/mm3 in the absence of ART.

  6. CD4 and viral load dynamics in antiretroviral-naïve HIV-infected adults from Soweto, South Africa: a prospective cohort.

    Science.gov (United States)

    Martinson, Neil A; Gupte, Nikhil; Msandiwa, Reginah; Moulton, Lawrence H; Barnes, Grace L; Ram, Malathi; Gray, Glenda; Hoffmann, Chris; Chaisson, Richard E

    2014-01-01

    CD4 count is a proxy for the extent of immune deficiency and declines in CD4 count are a measure of disease progression. Decline in CD4 count is an important component: for estimating benefits of ARV treatment; for individual level counselling on the rapidity of untreated disease progression and prognosis; and can be used in planning demand for health services. Our objective is to report CD4 decline and changes in viral load (VL) in a group of HIV-infected adults enrolled in a randomized trial of preventive treatment for TB in South Africa where clade C infection predominates. HIV-infected, tuberculin skin test positive adults who were not eligible for antiretroviral (ARV) treatment were randomized to a trial of preventive treatment from 2003-2005. VL and CD4 count were assessed at enrollment and CD4 counts repeated at least annually. During follow-up, individuals whose CD4 counts decreased to alcohol use had little impact on the estimate of CD4 decline. However, VL at baseline had a major impact on CD4 decline. The percent decline in CD4 count was 13.3% (95% CI 12.0%, 14.7%), 10.6% (95% CI 8.8%, 12.4%), and 13.8% (95% CI 12.1%, 15.5%) per annum for baseline VLs of 100,000 (N = 122) copies/ml. Our data suggests that six and a half years will elapse for an individual's CD4 count to decline from 750 to 350 cells/mm3 in the absence of ART.

  7. Determination of prospective displacement-based gate threshold for respiratory-gated radiation delivery from retrospective phase-based gate threshold selected at 4D CT simulation

    International Nuclear Information System (INIS)

    Vedam, S.; Archambault, L.; Starkschall, G.; Mohan, R.; Beddar, S.

    2007-01-01

    Four-dimensional (4D) computed tomography (CT) imaging has found increasing importance in the localization of tumor and surrounding normal structures throughout the respiratory cycle. Based on such tumor motion information, it is possible to identify the appropriate phase interval for respiratory gated treatment planning and delivery. Such a gating phase interval is determined retrospectively based on tumor motion from internal tumor displacement. However, respiratory-gated treatment is delivered prospectively based on motion determined predominantly from an external monitor. Therefore, the simulation gate threshold determined from the retrospective phase interval selected for gating at 4D CT simulation may not correspond to the delivery gate threshold that is determined from the prospective external monitor displacement at treatment delivery. The purpose of the present work is to establish a relationship between the thresholds for respiratory gating determined at CT simulation and treatment delivery, respectively. One hundred fifty external respiratory motion traces, from 90 patients, with and without audio-visual biofeedback, are analyzed. Two respiratory phase intervals, 40%-60% and 30%-70%, are chosen for respiratory gating from the 4D CT-derived tumor motion trajectory. From residual tumor displacements within each such gating phase interval, a simulation gate threshold is defined based on (a) the average and (b) the maximum respiratory displacement within the phase interval. The duty cycle for prospective gated delivery is estimated from the proportion of external monitor displacement data points within both the selected phase interval and the simulation gate threshold. The delivery gate threshold is then determined iteratively to match the above determined duty cycle. The magnitude of the difference between such gate thresholds determined at simulation and treatment delivery is quantified in each case. Phantom motion tests yielded coincidence of simulation

  8. A prospective registration study to determine feasibility of hematopoietic SCT in adults with acute leukemia: planning, expectations and reality.

    Science.gov (United States)

    Labopin, M; Gorin, N-C; Polge, E; Socié, G; Gurman, G; Gluckman, E; Jindra, P; Poiré, X; Schäfer-Eckart, K; Ruutu, T; Milone, G; Arcese, W; Mohty, M; Rocha, V

    2014-03-01

    For adults with acute leukemia, it is important to know whether the therapeutic schemes initially planned were actually implemented. The European Group for Blood and Marrow transplantation Acute Leukemia Working Party prospectively followed 695 consecutive patients who were registered at the time of HLA typing. Of 304 patients with an available matched sibling donor (MSD), SCT was planned in 264, chemotherapy in 33 and autografting in 7. For the rest, an unrelated donor (UD) search was initiated in 198. Among these, 117 were transplanted, 114 received chemotherapy and 77 underwent autografting. Probabilities of receiving a planned treatment were 60 and 65% at 1 and 2 years, respectively. Patients scheduled to receive MSD SCT had an 82% probability, whereas those scheduled to undergo UD SCT had a 57% probability, of receiving their transplant at 1 year. The only factor associated with a lower probability of MSD SCT in first remission was delayed HLA typing (HR=0.82; P=0.03). One year after enrollment, 40% of patients did not follow their initial treatment plan. Because OS was 50% only at 3 years and only 57% of the patients without a MSD underwent SCT, this suggests room for improvement in outcomes for adults with acute leukemia.

  9. Low Reynolds number airfoil aerodynamic loads determination via line integral of velocity obtained with particle image velocimetry

    Energy Technology Data Exchange (ETDEWEB)

    Lee, T.; Su, Y.Y. [McGill University, Department of Mechanical Engineering, Montreal, QC (Canada)

    2012-11-15

    The small magnitude lift forces generated by both a NACA 0012 airfoil and a thin flat plate at Re = 29,000 and 54,000 were determined through the line integral of velocity, obtained with particle image velocimetry, via the application of the Kutta-Joukowsky theorem. Surface pressure measurements of the NACA0012 airfoil were also obtained to validate the lift coefficient C{sub l}. The bound circulation was found to be insensitive to the size and aspect ratio of the rectangular integration loop for pre-stall angles. The present C{sub l} data were also found to agree very well with the surface pressure-determined lift coefficient for pre-stall conditions. A large variation in C{sub l} with the loop size and aspect ratio for post-stall conditions was, however, observed. Nevertheless, the present flat-plate C{sub l} data were also found to collectively agree with the published force-balance measurements at small angles of attack, despite the large disparity exhibited among the various published data at high angles. Finally, the ensemble-averaged wake velocity profiles were also used to compute the drag coefficient and, subsequently, the lift-to-drag ratio. (orig.)

  10. Analysis of individual drug use as a time-varying determinant of exposure in prospective population-based cohort studies

    NARCIS (Netherlands)

    B.H.Ch. Stricker (Bruno); Th. Stijnen (Theo)

    2010-01-01

    textabstractIn pharmaco-epidemiology, the use of drugs is the determinant of interest when studying exposure-outcome associations. The increased availability of computerized information about drug use on an individual basis has greatly facilitated analyses of drug effects on a population-based

  11. Biological, socio-demographic, work and lifestyle determinants of sitting in young adult women: a prospective cohort study

    NARCIS (Netherlands)

    Uijtdewilligen, L.; Twisk, J.W.R.; Singh, A.S.; Chin A Paw, M.J.M.; van Mechelen, W.; Brown, W.J.

    2014-01-01

    Background: Sitting is associated with health risks. Factors that influence sitting are however not well understood. The aim was to examine the biological, socio-demographic, work-related and lifestyle determinants of sitting time (including during transport, work and leisure) in young adult

  12. Determination of glycaemic index; some methodological aspects related to the analysis of carbohydrate load and characteristics of the previous evening meal.

    Science.gov (United States)

    Granfeldt, Y; Wu, X; Björck, I

    2006-01-01

    To determine the possible differences in glycaemic index (GI) depending on (1) the analytical method used to calculate the 'available carbohydrate' load, that is, using carbohydrates by difference (total carbohydrate by difference, minus dietary fibre (DF)) as available carbohydrates vs available starch basis (total starch minus resistant starch (RS)) of a food rich in intrinsic RS and (2) the effect of GI characteristics and/or the content of indigestible carbohydrates (RS and DF) of the evening meal prior to GI testing the following morning. Blood glucose and serum insulin responses were studied after subjects consuming (1) two levels of barley kernels rich in intrinsic RS (15.2%, total starch basis) and (2) after a standard breakfast following three different evening meals varying in GI and/or indigestible carbohydrates: pasta, barley kernels and white wheat bread, respectively. Healthy adults with normal body mass index. (1) Increasing the portion size of barley kernels from 79.6 g (50 g 'available carbohydrates') to 93.9 g (50 g available starch) to adjust for its RS content did not significantly affect the GI or insulin index (11). (2) The low GI barley evening meal, as opposed to white wheat bread and pasta evening meals, reduced the postprandial glycaemic and insulinaemic (23 and 29%, respectively, P base carbohydrate load on specific analyses of the available carbohydrate content. (2) A low GI barley evening meal containing high levels of indigestible carbohydrates (RS and DF) substantially reduced the GI and II of white wheat bread determined at a subsequent breakfast meal.

  13. The determination of acid-base properties of polymer surfaces by XPS: Present status and future prospects

    International Nuclear Information System (INIS)

    Chehimi, M.M.; Delamar, M.; Shahidzadeh-Ahmadi, N.; Arefi-Khonsari, F.; Amouroux, J.; Watts, J.F.

    1996-01-01

    The use of the molecular probe technique in conjunction with X-ray photoelectron spectroscopy (XPS) for the assessment of acid-base properties of polymer surfaces is reviewed. The method is based on the determination of the concentration and chemical shifts of Lewis acids (bases) sorbed in polymers of basic (acidic) character. In the case of chloroform (Lewis acid) sorbed in polymers of Lewis basic character, C12p binding energy is linearly correlated with ΔH AB , the heat of acid-base complex formation chloroform-polymer. This relationship has been used to determine the acid-base properties of poly(phenylene oxide), a homopolymer, and ammonia plasma-treated polypropylene. This work shows that XPS can now indeed be used to quantitatively assess the acid-base properties of modified polymer surfaces and perhaps be extended to map acid-base properties of polymer surfaces at the micron or submicron scale. copyright 1996 American Institute of Physics

  14. On-line preconcentration system using a minicolumn of polyurethane foam loaded with Me-BTABr for zinc determination by Flame Atomic Absorption Spectrometry

    International Nuclear Information System (INIS)

    Azevedo Lemos, Valfredo; Nei Lopes dos Santos, Walter; Silva Santos, Juracir; Bezerra de Carvalho, Marcilio

    2003-01-01

    In the present paper, an on-line system for preconcentration and determination of zinc by Flame Atomic Absorption Spectrometry (FAAS) is proposed. It is based in the sorption of zinc(II) ions on a minicolumn packed with polyurethane foam loaded with 2-[2'-(6-methyl-benzothiazolylazo)]-4-bromophenol (Me-BTABr) reagent. Chemical and flow variables as pH effect, sample flow rate and eluent concentration were optimized using univariate methodology. The results demonstrated that zinc can determinate using the sample pH in the range of 6.5-9.2, sample flow rate of 6.0 ml min -1 , and the elution step using 0.10 mol l -1 hydrochloric acid solution at flow rate of 5.5 ml min -1 . In these conditions, an enrichment factor of 23 and a sampling rate of 48 samples per hour were achieved. The detection limit (DL, 3σ) as IUPAC recommendation was 0.37 μg l -1 and the precision (assessed as the relative standard deviation, R.S.D.) reached values of 5.9-1.8% in zinc solutions of 1.0-10.0 μg l -1 concentration, respectively. The method was successfully applied to the determination of trace amounts of zinc in natural water samples from Salvador (Brazil)

  15. Microwave-Based Oxidation State and Soot Loading Determination on Gasoline Particulate Filters with Three-Way Catalyst Coating for Homogenously Operated Gasoline Engines

    Directory of Open Access Journals (Sweden)

    Markus Dietrich

    2015-09-01

    Full Text Available Recently, a novel method emerged to determine the oxygen storage degree of three way catalysts (TWC by a microwave-based method. Up to now, this method has been investigated only in lab-scale reactors or under steady state conditions. This work expands those initial studies. A TWC-coated gasoline particulate filter was investigated in a dynamic engine test bench simulating a typical European driving cycle (NEDC. It could be shown that both the oxygen storage degree and the soot loading can be monitored directly, but not simultaneously due to their competitive effects. Under normal driving conditions, no soot accumulation was observed, related to the low raw emissions and the catalytic coating of the filter. For the first time, the quality factor of the cavity resonator in addition to the resonance frequency was used, with the benefit of less cross sensitivity to inconstant temperature and water. Therefore, a temperature dependent calibration of the microwave signal was created and applied to monitor the oxidation state in transient driving cycles. The microwave measurement mirrors the oxidation state determined by lambda probes and can be highly beneficial in start-stop phases (where lambda-probes do not work and to determine the oxygen storage capacity (OSC without unnecessary emissions.

  16. Microwave-Based Oxidation State and Soot Loading Determination on Gasoline Particulate Filters with Three-Way Catalyst Coating for Homogenously Operated Gasoline Engines.

    Science.gov (United States)

    Dietrich, Markus; Jahn, Christoph; Lanzerath, Peter; Moos, Ralf

    2015-09-02

    Recently, a novel method emerged to determine the oxygen storage degree of three way catalysts (TWC) by a microwave-based method. Up to now, this method has been investigated only in lab-scale reactors or under steady state conditions. This work expands those initial studies. A TWC-coated gasoline particulate filter was investigated in a dynamic engine test bench simulating a typical European driving cycle (NEDC). It could be shown that both the oxygen storage degree and the soot loading can be monitored directly, but not simultaneously due to their competitive effects. Under normal driving conditions, no soot accumulation was observed, related to the low raw emissions and the catalytic coating of the filter. For the first time, the quality factor of the cavity resonator in addition to the resonance frequency was used, with the benefit of less cross sensitivity to inconstant temperature and water. Therefore, a temperature dependent calibration of the microwave signal was created and applied to monitor the oxidation state in transient driving cycles. The microwave measurement mirrors the oxidation state determined by lambda probes and can be highly beneficial in start-stop phases (where lambda-probes do not work) and to determine the oxygen storage capacity (OSC) without unnecessary emissions.

  17. The Lausanne cohort Lc65+: a population-based prospective study of the manifestations, determinants and outcomes of frailty

    Directory of Open Access Journals (Sweden)

    Rodondi Nicolas

    2008-08-01

    Full Text Available Abstract Background Frailty is a relatively new geriatric concept referring to an increased vulnerability to stressors. Various definitions have been proposed, as well as a range of multidimensional instruments for its measurement. More recently, a frailty phenotype that predicts a range of adverse outcomes has been described. Understanding frailty is a particular challenge both from a clinical and a public health perspective because it may be a reversible precursor of functional dependence. The Lausanne cohort Lc65+ is a longitudinal study specifically designed to investigate the manifestations of frailty from its first signs in the youngest old, identify medical and psychosocial determinants, and describe its evolution and related outcomes. Methods/Design The Lc65+ cohort was launched in 2004 with the random selection of 3054 eligible individuals aged 65 to 70 (birth year 1934–1938 in the non-institutionalized population of Lausanne (Switzerland. The baseline data collection was completed among 1422 participants in 2004–2005 through questionnaires, examination and performance tests. It comprised a wide range of medical and psychosocial dimensions, including a life course history of adverse events. Outcomes measures comprise subjective health, limitations in activities of daily living, mobility impairments, development of medical conditions or chronic health problems, falls, institutionalization, health services utilization, and death. Two additional random samples of 65–70 years old subjects will be surveyed in 2009 (birth year 1939–1943 and in 2014 (birth year 1944–1948. Discussion The Lc65+ study focuses on the sequence "Determinants → Components → Consequences" of frailty. It currently provides information on health in the youngest old and will allow comparisons to be made between the profiles of aging individuals born before, during and at the end of the Second World War.

  18. Load Induced Blindness

    Science.gov (United States)

    Macdonald, James S. P.; Lavie, Nilli

    2008-01-01

    Although the perceptual load theory of attention has stimulated a great deal of research, evidence for the role of perceptual load in determining perception has typically relied on indirect measures that infer perception from distractor effects on reaction times or neural activity (see N. Lavie, 2005, for a review). Here we varied the level of…

  19. A biosorption system for metal ions on Penicillium italicum - loaded on Sepabeads SP 70 prior to flame atomic absorption spectrometric determinations

    International Nuclear Information System (INIS)

    Mendil, Durali; Tuzen, Mustafa; Soylak, Mustafa

    2008-01-01

    A solid phase extraction (SPE) preconcentration system, coupled to a flame atomic absorption spectrometer (FAAS), was developed for the determination of copper(II), cadmium(II), lead(II), manganese(II), iron(III), nickel(II) and cobalt(II) ions at the μg L -1 levels on Penicillium italicum - loaded on Sepabeads SP 70. The analytes were adsorbed on biosorbent at the pH range of 8.5-9.5. The adsorbed metals were eluted with 1 mol L -1 HCl. The influences of the various analytical parameters including pH of the aqueous solutions, sample volume, flow rates were investigated for the retentions of the analyte ions. The recovery values are ranged from 95-102%. The influences of alkaline, earth alkaline and some transition metal ions were also discussed. Under the optimized conditions, the detection limits (3 s, n = 21) for analytes were in the range of 0.41 μg L -1 (cadmium) and 1.60 μg L -1 (iron). The standard reference materials (IAEA 336 Lichen, NIST SRM 1573a Tomato leaves) were analyzed to verify the proposed method. The method was successfully applied for the determinations of analytes in natural water, cultivated mushroom, lichen (Bryum capilare Hedw), moss (Homalothecium sericeum) and refined table salt samples

  20. A biosorption system for metal ions on Penicillium italicum - loaded on Sepabeads SP 70 prior to flame atomic absorption spectrometric determinations

    Energy Technology Data Exchange (ETDEWEB)

    Mendil, Durali; Tuzen, Mustafa [Gaziosmanpasa University, Faculty of Science and Arts, Chemistry Department, 60250 Tokat (Turkey); Soylak, Mustafa [Erciyes University, Faculty of Science and Arts, Chemistry Department, 38039 Kayseri (Turkey)], E-mail: msoylak@gmail.com

    2008-04-15

    A solid phase extraction (SPE) preconcentration system, coupled to a flame atomic absorption spectrometer (FAAS), was developed for the determination of copper(II), cadmium(II), lead(II), manganese(II), iron(III), nickel(II) and cobalt(II) ions at the {mu}g L{sup -1} levels on Penicillium italicum - loaded on Sepabeads SP 70. The analytes were adsorbed on biosorbent at the pH range of 8.5-9.5. The adsorbed metals were eluted with 1 mol L{sup -1} HCl. The influences of the various analytical parameters including pH of the aqueous solutions, sample volume, flow rates were investigated for the retentions of the analyte ions. The recovery values are ranged from 95-102%. The influences of alkaline, earth alkaline and some transition metal ions were also discussed. Under the optimized conditions, the detection limits (3 s, n = 21) for analytes were in the range of 0.41 {mu}g L{sup -1} (cadmium) and 1.60 {mu}g L{sup -1} (iron). The standard reference materials (IAEA 336 Lichen, NIST SRM 1573a Tomato leaves) were analyzed to verify the proposed method. The method was successfully applied for the determinations of analytes in natural water, cultivated mushroom, lichen (Bryum capilare Hedw), moss (Homalothecium sericeum) and refined table salt samples.

  1. Gas chromatographic determination of polycyclic aromatic hydrocarbons in water and smoked rice samples after solid-phase microextraction using multiwalled carbon nanotube loaded hollow fiber.

    Science.gov (United States)

    Matin, Amir Abbas; Biparva, Pourya; Gheshlaghi, Mohammad

    2014-12-29

    A novel solid-phase microextraction fiber was prepared based on multiwalled carbon nanotubes (MWCNTs) loaded on hollow fiber membrane pores. Stainless steel wire was used as unbreakable support. The major advantages of the proposed fiber are its (a) high reproducibility due to the uniform structure of the hollow fiber membranes, (b) high extraction capacity related to the porous structure of the hollow fiber and outstanding adsorptive characteristics of MWCNTs. The proposed fiber was applied for the microextraction of five representative polycyclic aromatic hydrocarbons (PAHs) from aqueous media (river and hubble-bubble water) and smoked rice samples followed by gas chromatographic determination. Analytical merits of the method, including high correlation coefficients [(0.9963-0.9992) and (0.9982-0.9999)] and low detection limits [(9.0-13.0ngL(-1)) and (40.0-150.0ngkg(-1))] for water and rice samples, respectively, made the proposed method suitable for the ultra-trace determination of PAHs. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Silica-gel Particles Loaded with an Ionic Liquid for Separation of Zr(IV Prior to Its Determination by ICP-OES

    Directory of Open Access Journals (Sweden)

    Hadi M. Marwani

    2016-06-01

    Full Text Available A new ionic liquid loaded silica gel amine (SG-APTMS-N,N-EPANTf2 was developed, as an adsorptive material, for selective adsorption and determination of zirconium, Zr(IV, without the need for a chelating intermediate. Based on a selectivity study, the SG-APTMS-N,N-EPANTf2 phase showed a perfect selectivity towards Zr(IV at pH 4 as compared to other metallic ions, including gold [Au(III], copper [Cu(II], cobalt [Co(II], chromium [Cr(III], lead [Pb(II], selenium [Se(IV] and mercury [Hg(II] ions. The influence of pH, Zr(IV concentration, contact time and interfering ions on SG-APTMS-N,N-EPANTf2 uptake for Zr(IV was evaluated. The presence of incorporated donor atoms in newly synthesized SG-APTMS-N,N-EPANTf2 phase played a significant role in enhancing its uptake capacity of Zr(IV by 78.64% in contrast to silica gel (activated. The equilibrium and kinetic information of Zr(IV adsorption onto SG-APTMS-N,N-EPANTf2 were best expressed by Langmuir and pseudo second-order kinetic models, respectively. General co-existing cations did not interfere with the extraction and detection of Zr(IV. Finally, the analytical efficiency of the newly developed method was also confirmed by implementing it for the determination of Zr(IV in several water samples.

  3. Lateral loadings on snubber assemblies

    International Nuclear Information System (INIS)

    Raphael, L.S.

    1981-01-01

    This paper examines the installation of snubber assemblies in power plants with respect to transverse or lateral loads as well as axial loads. Evaluation of the effects of low level, lateral loads was performed by analytical means. At higher loadings, the snubber assembly could no longer be treated as a column; therefore, the effects of lateral loadings was determined by test. The test consisted of applying both lateral and axial loads simultaneously. Results of both the analysis and the test showed that the application of lateral loads had a considerable effect on the snubber assemblies

  4. Laterally loaded masonry

    DEFF Research Database (Denmark)

    Raun Gottfredsen, F.

    In this thesis results from experiments on mortar joints and masonry as well as methods of calculation of strength and deformation of laterally loaded masonry are presented. The strength and deformation capacity of mortar joints have been determined from experiments involving a constant compressive...... stress and increasing shear. The results show a transition to pure friction as the cohesion is gradually destroyed. An interface model of a mortar joint that can take into account this aspect has been developed. Laterally loaded masonry panels have also been tested and it is found to be characteristic...... that laterally loaded masonry exhibits a non-linear load-displacement behaviour with some ductility....

  5. Influence of Individual Determinants on Physical Activity at Work and During Leisure Time in Soldiers: A Prospective Surveillance Study.

    Science.gov (United States)

    Schulze, Christoph; Lindner, Tobias; Goethel, Pauline; Müller, Marie; Mittelmeier, Wolfram; Bader, Rainer

    2016-01-01

    Quantified physical activity is an important parameter for evaluating the risk of the incidence of internal and musculoskeletal disorders. The objective of this study was to evaluate the physical activity of German Soldiers on duty and during leisure time with regard to individual determinants and to evaluate if factors associated with the risk of the incidence of internal or musculoskeletal disorders are of relevance for physical activity. For this purpose, we conducted activity measurements on 169 subjects. The accelerometer-based activity sensor was worn for 7 consecutive days. The number of steps taken was evaluated as an activity marker.We observed that a high body mass index and a large waist circumference were associated with a low activity level. Women were found to be more active than men, particularly during leisure time. Personnel under 25 years of age were more physically active than those between 25 and 50 years of age. Subjects with underlying musculoskeletal disorders were less active than those who had internal disorders or were healthy. Men and overweight people run a higher risk of developing musculoskeletal and internal disorders. Health promotion should focus on raising the physical activity level with the aim of exerting a positive influence on the associated risk factors.

  6. Medication use in early pregnancy-prevalence and determinants of use in a prospective cohort of women.

    LENUS (Irish Health Repository)

    Cleary, Brian J

    2012-02-01

    PURPOSE: To examine the extent, nature and determinants of medication use in early pregnancy. METHODS: We reviewed early pregnancy medication use, as reported to a midwife at the booking interview, in women delivering between 2000 and 2007 in a large maternity hospital in Dublin, Ireland (n = 61 252). RESULTS: Excluding folic acid, at least one medication was reported in 23 989 (39.2%) pregnancies. Over the counter (OTC) medications were reported in 11 970 (19.5%) pregnancies, illicit drugs or methadone in 545 (0.9%) and herbal medicines\\/supplements in 352 (0.58%). FDA category D and X medications were reported by 1532 (2.5%) and 1987 (3.2%) women. Asthma, depression and hypertension were among the most commonly reported chronic medical disorders. Medications with potential for foetal harm were reported by 86 (15.7%) women treated for depression and 68 (20%) women treated for hypertension. Factors associated with reporting the use of medications with potential for foetal harm included unplanned pregnancy (adjusted odds ratio [aOR] 1.31, 95% confidence interval [CI] 1.12-1.52), booking at less than 12 weeks gestation (aOR 1.83, 95%CI 1.58-2.13), being above 25 years of age, unemployed (aOR 2.58, 95%CI 2.03-3.29), nulliparous (aOR 1.41; 95%CI 1.22-1.63), single (aOR 1.28; 95%CI 1.06-1.54) or smoking during pregnancy (aOR 1.96, 95%CI 1.67-2.28). CONCLUSIONS: Women frequently report medication use in early pregnancy. Women and prescribers need to be aware of the lack of pregnancy safety data for many medications, and the need for pre-pregnancy planning. Prescribers should ensure that optimal medications are used when treating women of childbearing potential with chronic medical disorders.

  7. Biological, socio-demographic, work and lifestyle determinants of sitting in young adult women: a prospective cohort study.

    Science.gov (United States)

    Uijtdewilligen, Léonie; Twisk, Jos W R; Singh, Amika S; Chinapaw, Mai J M; van Mechelen, Willem; Brown, Wendy J

    2014-01-24

    Sitting is associated with health risks. Factors that influence sitting are however not well understood. The aim was to examine the biological, socio-demographic, work-related and lifestyle determinants of sitting time (including during transport, work and leisure) in young adult Australian women. Self-reported data from 11,676 participants (aged 22-27 years in 2000) in the Australian Longitudinal Study on Women's Health were collected over 9 years in 2000, 2003, 2006 and 2009. Generalised Estimating Equations were used to examine univariable and multivariable associations of body mass index (BMI), country of birth, area of residence, education, marital status, number of children, occupational status, working hours, physical activity, smoking, alcohol intake and stress with week- and weekend-day sitting time. Compared with women in the respective referent categories, (1) women with higher BMI, those born in Asia, those with less than University level education, doing white collar work, working 41-48 hours a week, current smokers, non, rare or risky/high risk drinkers and those being somewhat stressed had significantly higher sitting time; and (2) women living in rural and remote areas, partnered women, those with children, those without a paid job and blue collar workers, those working less than 34 hours a week, and active women had significantly lower sitting time. Among young adult Australian women, those with higher BMI, those born in Asia, those with higher level occupations and long working hours, were most at risk of higher sitting time. These results can be used to identify at-risk groups and inform intervention development.

  8. Rates and determinants of early initiation of breastfeeding and exclusive breast feeding at 42 days postnatal in six low and middle-income countries: A prospective cohort study.

    Science.gov (United States)

    Patel, Archana; Bucher, Sherri; Pusdekar, Yamini; Esamai, Fabian; Krebs, Nancy F; Goudar, Shivaprasad S; Chomba, Elwyn; Garces, Ana; Pasha, Omrana; Saleem, Sarah; Kodkany, Bhalachandra S; Liechty, Edward A; Kodkany, Bhala; Derman, Richard J; Carlo, Waldemar A; Hambidge, K; Goldenberg, Robert L; Althabe, Fernando; Berrueta, Mabel; Moore, Janet L; McClure, Elizabeth M; Koso-Thomas, Marion; Hibberd, Patricia L

    2015-01-01

    Early initiation of breastfeeding after birth and exclusive breastfeeding through six months of age confers many health benefits for infants; both are crucial high impact, low-cost interventions. However, determining accurate global rates of these crucial activities has been challenging. We use population-based data to describe: (1) rates of early initiation of breastfeeding (defined as within 1 hour of birth) and of exclusive breastfeeding at 42 days post-partum; and (2) factors associated with failure to initiate early breastfeeding and exclusive breastfeeding at 42 days post-partum. Prospectively collected data from women and their live-born infants enrolled in the Global Network's Maternal and Newborn Health Registry between January 1, 2010-December 31, 2013 included women-infant dyads in 106 geographic areas (clusters) at 7 research sites in 6 countries (Kenya, Zambia, India [2 sites], Pakistan, Argentina and Guatemala). Rates and risk factors for failure to initiate early breastfeeding were investigated for the entire cohort and rates and risk factors for failure to maintain exclusive breastfeeding was assessed in a sub-sample studied at 42 days post-partum. A total of 255,495 live-born women-infant dyads were included in the study. Rates and determinants for the exclusive breastfeeding sub-study at 42 days post-partum were assessed from among a sub-sample of 105,563 subjects. Although there was heterogeneity by site, and early initiation of breastfeeding after delivery was high, the Pakistan site had the lowest rates of early initiation of breastfeeding. The Pakistan site also had the highest rate of lack of exclusive breastfeeding at 42 days post-partum. Across all regions, factors associated with failure to initiate early breastfeeding included nulliparity, caesarean section, low birth weight, resuscitation with bag and mask, and failure to place baby on the mother's chest after delivery. Factors associated with failure to achieve exclusive breastfeeding

  9. Resveratrol-loaded polymeric nanoparticles: validation of an HPLC-PDA method to determine the drug entrapment and evaluation of its antioxidant activity.

    Science.gov (United States)

    da Rocha Lindner, Gabriela; Khalil, Najeh Maissar; Mainardes, Rubiana Mara

    2013-01-01

    Poly(lactic acid) (PLA) and PLA-poly(ethylene glycol) (PLA-PEG) nanoparticles containing resveratrol (RVT) were developed, and their antioxidant activity was evaluated. An analytical method using high performance liquid chromatography (HPLC)/photodiode array (PDA) detection was also developed and validated for RVT determination in nanoparticles. The mobile phase consisted of methanol : water (51 : 49, v/v) flowed at 0.9 mL/min, and the PDA detector was set at wavelength of 306 nm. The mean diameter of the nanoparticles varied between 180 and 220 nm, and the encapsulation efficiency of RVT ranged from 60% to 88%. The nanoparticles containing RVT were evaluated for their ability to scavenge the radical (2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) (ABTS•⁺). The profile obtained from the PLA nanoparticles containing RVT demonstrated that after 24 h, there was almost no increase in antioxidant activity, which was lower than that of the free RVT and RVT-loaded PLA-PEG nanoparticles. For PLA-PEG nanoparticles, the radical-scavenging activity of RVT was shown to increase with time, and after 48 h, it was similar to that observed with free RVT.

  10. Resveratrol-Loaded Polymeric Nanoparticles: Validation of an HPLC-PDA Method to Determine the Drug Entrapment and Evaluation of Its Antioxidant Activity

    Directory of Open Access Journals (Sweden)

    Gabriela da Rocha Lindner

    2013-01-01

    Full Text Available Poly(lactic acid (PLA and PLA-poly(ethylene glycol (PLA-PEG nanoparticles containing resveratrol (RVT were developed, and their antioxidant activity was evaluated. An analytical method using high performance liquid chromatography (HPLC/photodiode array (PDA detection was also developed and validated for RVT determination in nanoparticles. The mobile phase consisted of methanol : water (51 : 49, v/v flowed at 0.9 mL/min, and the PDA detector was set at wavelength of 306 nm. The mean diameter of the nanoparticles varied between 180 and 220 nm, and the encapsulation efficiency of RVT ranged from 60% to 88%. The nanoparticles containing RVT were evaluated for their ability to scavenge the radical (2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid diammonium salt (ABTS•+. The profile obtained from the PLA nanoparticles containing RVT demonstrated that after 24 h, there was almost no increase in antioxidant activity, which was lower than that of the free RVT and RVT-loaded PLA-PEG nanoparticles. For PLA-PEG nanoparticles, the radical-scavenging activity of RVT was shown to increase with time, and after 48 h, it was similar to that observed with free RVT.

  11. Load forecasting

    International Nuclear Information System (INIS)

    Mak, H.

    1995-01-01

    Slides used in a presentation at The Power of Change Conference in Vancouver, BC in April 1995 about the changing needs for load forecasting were presented. Technological innovations and population increase were said to be the prime driving forces behind the changing needs in load forecasting. Structural changes, market place changes, electricity supply planning changes, and changes in planning objectives were other factors discussed. It was concluded that load forecasting was a form of information gathering, that provided important market intelligence

  12. Determination of total concentration of chemically labeled metabolites as a means of metabolome sample normalization and sample loading optimization in mass spectrometry-based metabolomics.

    Science.gov (United States)

    Wu, Yiman; Li, Liang

    2012-12-18

    For mass spectrometry (MS)-based metabolomics, it is important to use the same amount of starting materials from each sample to compare the metabolome changes in two or more comparative samples. Unfortunately, for biological samples, the total amount or concentration of metabolites is difficult to determine. In this work, we report a general approach of determining the total concentration of metabolites based on the use of chemical labeling to attach a UV absorbent to the metabolites to be analyzed, followed by rapid step-gradient liquid chromatography (LC) UV detection of the labeled metabolites. It is shown that quantification of the total labeled analytes in a biological sample facilitates the preparation of an appropriate amount of starting materials for MS analysis as well as the optimization of the sample loading amount to a mass spectrometer for achieving optimal detectability. As an example, dansylation chemistry was used to label the amine- and phenol-containing metabolites in human urine samples. LC-UV quantification of the labeled metabolites could be optimally performed at the detection wavelength of 338 nm. A calibration curve established from the analysis of a mixture of 17 labeled amino acid standards was found to have the same slope as that from the analysis of the labeled urinary metabolites, suggesting that the labeled amino acid standard calibration curve could be used to determine the total concentration of the labeled urinary metabolites. A workflow incorporating this LC-UV metabolite quantification strategy was then developed in which all individual urine samples were first labeled with (12)C-dansylation and the concentration of each sample was determined by LC-UV. The volumes of urine samples taken for producing the pooled urine standard were adjusted to ensure an equal amount of labeled urine metabolites from each sample was used for the pooling. The pooled urine standard was then labeled with (13)C-dansylation. Equal amounts of the (12)C

  13. Report on the quality control study NAT-7 for the determination of trace and minor elements in dust artificially loaded on air filters

    International Nuclear Information System (INIS)

    Bleise, A.; Smodis, A.

    2002-02-01

    from the literature. Precision and accuracy criteria were applied to 10 elements. 350 laboratory mean values were reported for these elements, 75 values (21%) did not pass the set proficiency test criteria. The individual laboratory results are listed in appendix IV. In conclusion, the results from this quality control study revealed that the determination of trace elements in dust material loaded on filters is a difficult task for analytical laboratories. The results indicate the urgent need for a real matrix standard reference material for checking and improving the analytical performance in laboratories analysing routinely air filters (author)

  14. Load research manual. Volume 1. Load research procedures

    Energy Technology Data Exchange (ETDEWEB)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

  15. Patient-Related Determinants of the Administration of Continuous Palliative Sedation in Hospices and Palliative Care Units: A Prospective, Multicenter, Observational Study.

    Science.gov (United States)

    van Deijck, Rogier H P D; Hasselaar, Jeroen G J; Verhagen, Stans C A H H V M; Vissers, Kris C P; Koopmans, Raymond T C M

    2016-05-01

    Knowledge of determinants that are associated with the administration of continuous palliative sedation (CPS) helps physicians identify patients who are at risk of developing refractory symptoms, thereby enabling proactive care planning. This study aims to explore which patient-related factors at admission are associated with receiving CPS later in the terminal phase of life. A prospective multicenter observational study was performed in six Dutch hospices and three nursing home-based palliative care units. The association between patient-related variables at admission (age, gender, diagnosis, use of opioids or psycholeptics, number of medications, Karnofsky Performance Status scale score, Edmonton Symptom Assessment System distress score, and Glasgow Coma Scale score) and the administration of CPS at the end of life was analyzed. A total of 467 patients died during the study period, of whom 130 received CPS. In univariate analysis, statistically significant differences were noted between the sedated and nonsedated patients with respect to younger age (P = 0.009), malignancy as a diagnosis (P = 0.05), higher Karnofsky Performance Status score (P = 0.03), the use of opioids (P Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  16. Macular Choroidal Thickness May Be the Earliest Determiner to Detect the Onset of Diabetic Retinopathy in Patients with Prediabetes: A Prospective and Comparative Study.

    Science.gov (United States)

    Yazgan, Serpil; Arpaci, Dilek; Celik, Haci Ugur; Dogan, Mustafa; Isık, Irem

    2017-07-01

    To evaluate the macular and peripapillary choroidal thickness and retinal volume in prediabetes. This prospective comparative study included 53 patients with prediabetes and 53 age- and sex-matched healthy subjects. Only right eyes were selected. Choroidal thicknesses (CT) and retinal volume were measured by optical coherence tomography. Macular CT was measured at the seven points including macular center, 1, 2, and 3 mm distances along the temporal and nasal scans. Peripapillary CT was measured at the eight points of the optic disk area. Systemic and laboratory findings of the subjects were also recorded. There were no significant differences in blood pressures, ocular findings including intraocular pressure, visual acuity, and refractive powers, and macular volumes between the two groups (p > 0.005). Macular and peripapillary CT at all measuring points, body mass index (BMI), fasting blood glucose (FBG), hemoglobinA1C, and lipid profile were significantly higher in prediabetic patients (p Prediabetic factors including impaired FBG, increased hemoglobinA1C, and BMI are independent risk factors for increase in choroidal thickness. Increased macular choroidal thickness may be the earliest determiner to detect the onset of diabetic retinopathy in prediabetes.

  17. Load Estimation from Modal Parameters

    DEFF Research Database (Denmark)

    Aenlle, Manuel López; Brincker, Rune; Fernández, Pelayo Fernández

    2007-01-01

    In Natural Input Modal Analysis the modal parameters are estimated just from the responses while the loading is not recorded. However, engineers are sometimes interested in knowing some features of the loading acting on a structure. In this paper, a procedure to determine the loading from a FRF m...

  18. Oral health-related quality of life changes after placement of immediately loaded single implants in healed alveolar ridges or extraction sockets: a 5-year prospective follow-up study.

    Science.gov (United States)

    Raes, Stefanie; Raes, Filiep; Cooper, Lyndon; Giner Tarrida, Luis; Vervaeke, Stijn; Cosyn, Jan; De Bruyn, Hugo

    2017-06-01

    The impact of single implants on oral health-related quality of life (OHRQoL) is scarcely investigated, especially when combined with immediate placement and loading in extraction sockets. The aim was to describe prospectively the changes of OHRQoL with single implants placed in the esthetic zone in healed ridges or in extraction sockets after 5 years. Ninety-six patients, enrolled at three clinical centers, received 102 single implants placed in a healed ridge (n = 54 implants/50 patients) or in extraction sockets (n = 48 implants/46 patients). Implants were immediately provisionalized, and permanent crowns were cemented after 12 weeks. Oral health impact profile questionnaires (OHIP-14) were completed before surgery, after 1 (provisional crown), 6 (permanent crown), 12 and 60 months, respectively. The overall OHIP-14 score pertains to seven domains with two items each and was assessed on a Likert scale of 0-4 (0 = never and 4 = very often). The evolution of the total OHIP-14 score and changes within all OHIP domains over time and between groups were assessed with a linear mixed-effect model analysis. After 5 years, overall implant survival was 98%. The total OHIP-14 score for both groups combined decreased from 0.50 at baseline to 0.17 at 6 months (P < 0.001), indicative of improvement. For both groups, this remained stable up to 5 years (P = 0.41). However, after 5 years, the total OHIP-14 score revealed a statistically significantly higher improvement in the healed group compared with the extraction group (P = 0.027). Missing a single tooth in the maxillary esthetic zone leads to limited OHRQoL problems as reflected by a low overall OHIP score. However, OHRQoL improves less in the extraction group, reflecting that replacing a missing tooth is perceived as more beneficial than replacing a present tooth. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  19. Optimal preparation-to-colonoscopy interval in split-dose PEG bowel preparation determines satisfactory bowel preparation quality: an observational prospective study.

    Science.gov (United States)

    Seo, Eun Hee; Kim, Tae Oh; Park, Min Jae; Joo, Hee Rin; Heo, Nae Yun; Park, Jongha; Park, Seung Ha; Yang, Sung Yeon; Moon, Young Soo

    2012-03-01

    Several factors influence bowel preparation quality. Recent studies have indicated that the time interval between bowel preparation and the start of colonoscopy is also important in determining bowel preparation quality. To evaluate the influence of the preparation-to-colonoscopy (PC) interval (the interval of time between the last polyethylene glycol dose ingestion and the start of the colonoscopy) on bowel preparation quality in the split-dose method for colonoscopy. Prospective observational study. University medical center. A total of 366 consecutive outpatients undergoing colonoscopy. Split-dose bowel preparation and colonoscopy. The quality of bowel preparation was assessed by using the Ottawa Bowel Preparation Scale according to the PC interval, and other factors that might influence bowel preparation quality were analyzed. Colonoscopies with a PC interval of 3 to 5 hours had the best bowel preparation quality score in the whole, right, mid, and rectosigmoid colon according to the Ottawa Bowel Preparation Scale. In multivariate analysis, the PC interval (odds ratio [OR] 1.85; 95% CI, 1.18-2.86), the amount of PEG ingested (OR 4.34; 95% CI, 1.08-16.66), and compliance with diet instructions (OR 2.22l 95% CI, 1.33-3.70) were significant contributors to satisfactory bowel preparation. Nonrandomized controlled, single-center trial. The optimal time interval between the last dose of the agent and the start of colonoscopy is one of the important factors to determine satisfactory bowel preparation quality in split-dose polyethylene glycol bowel preparation. Copyright © 2012 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

  20. Baseline characteristics and treatment of patients in prospective comparison of ARNI with ACEI to determine impact on global mortality and morbidity in heart failure trial (PARADIGM-HF).

    Science.gov (United States)

    McMurray, John J V; Packer, Milton; Desai, Akshay S; Gong, Jianjian; Lefkowitz, Martin; Rizkala, Adel R; Rouleau, Jean L; Shi, Victor C; Solomon, Scott D; Swedberg, Karl; Zile, Michael R

    2014-07-01

    To describe the baseline characteristics and treatment of the patients randomized in the PARADIGM-HF (Prospective comparison of ARNi with ACEi to Determine Impact on Global Mortality and morbidity in Heart Failure) trial, testing the hypothesis that the strategy of simultaneously blocking the renin-angiotensin-aldosterone system and augmenting natriuretic peptides with LCZ696 200 mg b.i.d. is superior to enalapril 10 mg b.i.d. in reducing mortality and morbidity in patients with heart failure and reduced ejection fraction. Key demographic, clinical and laboratory findings, along with baseline treatment, are reported and compared with those of patients in the treatment arm of the Studies Of Left Ventricular Dysfunction (SOLVD-T) and more contemporary drug and device trials in heart failure and reduced ejection fraction. The mean age of the 8442 patients in PARADIGM-HF is 64 (SD 11) years and 78% are male, which is similar to SOLVD-T and more recent trials. Despite extensive background therapy with beta-blockers (93% patients) and mineralocorticoid receptor antagonists (60%), patients in PARADIGM-HF have persisting symptoms and signs, reduced health related quality of life, a low LVEF (mean 29 ± SD 6%) and elevated N-terminal-proB type-natriuretic peptide levels (median 1608 inter-quartile range 886-3221 pg/mL). PARADIGM-HF will determine whether LCZ696 is more beneficial than enalapril when added to other disease-modifying therapies and if further augmentation of endogenous natriuretic peptides will reduce morbidity and mortality in heart failure and reduced ejection fraction. © 2014 The Authors. European Journal of Heart Failure published by John Wiley & Sons Ltd on behalf of European Society of Cardiology.

  1. Plastic limit loads for cylindrical shell intersections under combined loading

    International Nuclear Information System (INIS)

    Skopinsky, V.N.; Berkov, N.A.; Vogov, R.A.

    2015-01-01

    In this research, applied methods of nonlinear analysis and results of determining the plastic limit loads for shell intersection configurations under combined internal pressure, in-plane moment and out-plane moment loadings are presented. The numerical analysis of shell intersections is performed using the finite element method, geometrically nonlinear shell theory in quadratic approximation and plasticity theory. For determining the load parameter of proportional combined loading, the developed maximum criterion of rate of change of relative plastic work is employed. The graphical results for model of cylindrical shell intersection under different two-parameter combined loadings (as generalized plastic limit load curves) and three-parameter combined loading (as generalized plastic limit load surface) are presented on the assumption that the internal pressure, in-plane moment and out-plane moment loads were applied in a proportional manner. - Highlights: • This paper presents nonlinear two-dimensional FE analysis for shell intersections. • Determining the plastic limit loads under combined loading is considered. • Developed maximum criterion of rate of change of relative plastic work is employed. • Plastic deformation mechanism in shell intersections is discussed. • Results for generalized plastic limit load curves of branch intersection are presented

  2. Determination of the NOx Loading of an Automotive Lean NOx Trap by Directly Monitoring the Electrical Properties of the Catalyst Material Itself

    Directory of Open Access Journals (Sweden)

    Ralf Moos

    2011-08-01

    Full Text Available Recently, it has been shown that the degree of loading of several types of automotive exhaust aftertreatment devices can be directly monitored in situ and in a contactless way by a microwave-based method. The goal of this study was to clarify whether this method can also be applied to NOx storage and reduction catalysts (lean NOx traps in order to obtain further knowledge about the reactions occurring in the catalyst and to compare the results with those obtained by wirebound NOx loading sensors. It is shown that both methods are able to detect the different catalyst loading states. However, the sensitivity of the microwave-based method turned out to be small compared to that previously observed for other exhaust aftertreatment devices. This may limit the practical applicability of the microwave-based NOx loading detection in lean NOx traps.

  3. Determination of residual load-bearing capacity of concrete beams at the operation stage by the strength reinforcement and concrete criterion

    OpenAIRE

    V.S. Utkin

    2015-01-01

    An experimental theoretical method was considered for estimating the residual load-bearing capacity of an individual reinforced concrete beam at the operational stage according to the criteria of the working strength and durability of concrete reinforcement compressed zone of the beam. Integrated methods of beam testing and probabilistic methods of random variables definition were used. Ultimate load in the form of interval during the operational phase was accepted as the measure of carr...

  4. Structural load combinations

    International Nuclear Information System (INIS)

    Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

    1985-01-01

    This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane eqrthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years. 23 refs., 9 tabs

  5. Structural load combinations

    International Nuclear Information System (INIS)

    Hwang, H.; Reich, M.; Ellingwood, B.; Shinozuka, M.

    1986-01-01

    This paper presents the latest results of the program entitled, ''Probability Based Load Combinations For Design of Category I Structures''. In FY 85, a probability-based reliability analysis method has been developed to evaluate safety of shear wall structures. The shear walls are analyzed using stick models with beam elements and may be subjected to dead load, live load and in-plane earthquake. Both shear and flexure limit states are defined analytically. The limit state probabilities can be evaluated on the basis of these limit states. Utilizing the reliability analysis method mentioned above, load combinations for the design of shear wall structures have been established. The proposed design criteria are in the load and resistance factor design (LRFD) format. In this study, the resistance factors for shear and flexure and load factors for dead and live loads are preassigned, while the load factor for SSE is determined for a specified target limit state probability of 1.0 x 10 -6 or 1.0 x 10 -5 during a lifetime of 40 years

  6. Breast Cancer Risk in Relation to Serum IGF-I, IGFBP-3 and their Genetic Determinants: A Study Within the European Prospective Investigation into Cancer (EPIC)

    National Research Council Canada - National Science Library

    Kaaks, Rudolf

    2002-01-01

    Purpose and scope: we are conducting a large case-control study, nested within a prospective cohort, to estimate relative risks of breast cancer by levels of IGF-I and IGFBP-3, and to examine associations of IGF...

  7. A prospective comparison between three-dimensional magnetic resonance imaging and ventriculography for target-coordinate determination in frame-based functional stereotactic neurosurgery

    NARCIS (Netherlands)

    Schuurman, P. R.; de Bie, R. M.; Majoie, C. B.; Speelman, J. D.; Bosch, D. A.

    1999-01-01

    OBJECT: The purpose of this prospective study was to compare stereotactic coordinates obtained with ventriculography with coordinates derived from stereotactic computer-reconstructed three-dimensional magnetic resonance (3D-MR) imaging in functional stereotactic procedures. METHODS: In 15

  8. Prospective Clinical Trial of 18F-Fluciclovine PET/CT for Determining the Response to Neoadjuvant Therapy in Invasive Ductal and Invasive Lobular Breast Cancers.

    Science.gov (United States)

    Ulaner, Gary A; Goldman, Debra A; Corben, Adriana; Lyashchenko, Serge K; Gönen, Mithat; Lewis, Jason S; Dickler, Maura

    2017-07-01

    18 F-labeled 1-amino-3-fluorocyclobutane-1-carboxylic acid ( 18 F-fluciclovine) is a leucine analog radiotracer that depicts amino acid transport into cells. 18 F-fluciclovine PET/CT visualizes malignancy, including prostate cancer, invasive ductal breast cancer, and invasive lobular breast cancer. Whether changes in 18 F-fluciclovine avidity reflect changes in tumor burden resulting from treatment has not been shown. In this prospective clinical trial (clinical trials.gov: NCT01864083), changes in 18 F-fluciclovine avidity after neoadjuvant therapy were compared to breast cancer therapy response, as determined by residual tumor burden on pathology, were evaluated. Methods: Twenty-four women with a new diagnosis of locally advanced invasive ductal breast cancer ( n = 18) or invasive lobular breast cancer ( n = 6) underwent 18 F-fluciclovine PET/CT before and after the completion of neoadjuvant systemic therapy. SUV max , SUV mean , metabolic tumor volume, and total lesion avidity were obtained for the primary breast tumor, axillary lymph nodes, and extraaxillary lymph nodes on each examination and corrected for background 18 F-fluciclovine avidity. The relationship between changes in 18 F-fluciclovine avidity and the percentage of reduction of tumor on pathology was assessed with the Spearman rank correlation. Results: The median decrease in the corrected SUV max of the primary breast lesions was 99% (range, 33%-100%). The median reduction of tumor on pathology was 92% (range, 10%-100%). Changes in 18 F-fluciclovine avidity were strongly correlated with the percentage of reduction of tumor on pathology (Spearman ρ, 0.79; 95% CI, 0.56-0.90; P < 0.001). Conclusion: Changes in 18 F-fluciclovine avidity strongly correlated with the tumor response on pathology in this pilot study. © 2017 by the Society of Nuclear Medicine and Molecular Imaging.

  9. NutriNet-Salud México. Prospective study online: 2018-2028. Relationship between nutrition and health and determinants of dietary habits and nutritional status.

    Science.gov (United States)

    Barriguete-Meléndez, Jorge Armando; Hercberg, Serge; Galán, Pilar; Parodi, André; Baulieux, Jacques

    2018-01-01

    NutriNet-Salud Mexico is a digital health information system, e-epidemiology instrument, online, open and free, to recording and analysis the determinants of dietary habits and nutritional status of the Mexican population, for the prevention of overweight, obesity and noncommunicable diseases for the period 2018-2028. Describe the design, development and implementation of NutriNet-Salud Mexico from the French model NutriNet-Santé France 2008-2018. NutriNet-Salud Mexico platform is the basis for the development of health information system for prospective cohort study, scheduled for a period of 10 years (2018-2028), with a dedicated website, and its development will enable to have multiple study populations within an initial set of five self-applicable questionnaires validated in Mexican population. The information will enable to develop applied research, learn and monitor food contributions and nutritional status of the population, assess the impact of public health actions on feeding behavior and nutritional status, comparing populations between countries (Mexico, France, Belgium and Switzerland) and national institutes, universities and states. NutriNet-Salud Mexico will provide information for assist in research and public action, especially to guide public policies on nutrition Mexico. The scientific elements will make appropriate nutritional recommendations to different populations and access to a representative nominal population sample with low-cost, in real-time, and with dual approach to e-epidemiology: cohort study to identify causality and cross-sectional studies (descriptive research, monitoring and evaluation). Copyright: © 2018 Permanyer.

  10. Beam loading

    OpenAIRE

    Boussard, Daniel

    1987-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superco...

  11. The determination of uranium distribution homogeneity in the fuel plates with the uranium loading of 4.80 and 5.20 g/cm3 by X-Ray attenuation

    International Nuclear Information System (INIS)

    Supardjo; Rojak, A.; Boybul; Suyoto; Datam, A. S.

    2000-01-01

    The calibration of X-Ray intensity of the U 3 Si 2 -AI fuel plates with the uranium loading between 3.60 up to 5.20 g/cm 3 and varied thickness of AIMgSi1 reference block have been performed. The measurement with changing variable slit diameter and energy of X-Ray attenuation, are produced enough representative X-Ray intensity at 18 mm slit diameter and energy of 43 kV. From the correlation of X-ray intensities vs variation of uranium loading in the fuel plates and thickness of the AIMgSi1 materials, the equivalence of thickness of the AIMgSi1 block to the uranium loading of fuel plates are determined. By assuming that the tolerance of the homogeneity measurement is + 20 % from normal thickness staircase of the AIMgSi1 standard could be determined and than together with fuel plate were scanned to determine the uranium homogeneity. The test result on the U 3 Si 2 -AI fuel plates with uranium loading of 4.80 and 5.20 g/cm 3 (each 4 fuel plates) indicated that uranium distribution in the fuel plates is relatively homogeneous, with each maximum deviation being 6.30 % and 6.90%. It is showed that measurement method is relatively good, easy, and fast so that this method is suitable to control the uranium homogeneity in the fuel plate. (author)

  12. Longitudinal prospective observational type study about determinants of renal resistive index variations in chronic renal failure patients treated with conventional medical and dietetic therapy

    Directory of Open Access Journals (Sweden)

    Simone Brardi

    2017-12-01

    Full Text Available Objective: This longitudinal prospective observational type study was conceived with the aim to examine the impact on renal resistive index (RRI of the variables that we can manipulate with therapeutic and or dietetic interventions in a chronic kidney disease population in order to known which of these variables was statistically related to changes in RRI and therefore could become the object of the greatest therapeutic effort. Material and methods: This study was undertaken between May 2016 to May 2017 in the outpatient nephrology and urology clinic of San Donato Hospital in Arezzo. The study population (84 patients: 47 males and 37 females was randomly selected among the chronic kidney patients (with various degrees of renal impairment affected by hypertension and or diabetes mellitus. After a comprehensive medical examination these patients were submitted to determination of serum creatinine, glycated hemoglobin, 24-hour urinary albumin excretion and finally renal Doppler ultrasonography. Then the patients were submitted to a full therapeutic and dietetic intervention to ameliorate the renal impairment by a wide range of actions and after on average a one-year interval were submitted again to a new medical examination and a second determination of serum creatinine, glycated hemoglobin, 24-hour urinary albumin excretion and a new renal Doppler ultrasonography too. Results: The comparison between basal and final data revealed a slight reduction in the mean of bilateral renal resistance indices (Delta RRI: -0.0182 ± 0.08, associated to a slight increase in the mean glomerular filtration rate (Delta GFR: 0.8738 ± 10.95 ml/min/1.73 m2, a reduction in mean body weight (Delta weight: -1.9548 ± 5.26 Kg and mean BMI (Delta BMI: -0.7643 ± 2.10 Kg/m2 as well as a reduction in the mean systolic blood pressure (Delta systolic blood pressure: -8.8333 ± 25.19 mmHg. Statistical analysis showed statistically significant correlations (p < 0.05 between

  13. Longitudinal prospective observational type study about determinants of renal resistive index variations in chronic renal failure patients treated with conventional medical and dietetic therapy.

    Science.gov (United States)

    Brardi, Simone; Cevenini, Gabriele; Giovannelli, Vanni; Romano, Giuseppe

    2017-12-31

    This longitudinal prospective observational type study was conceived with the aim to examine the impact on renal resistive index (RRI) of the variables that we can manipulate with therapeutic and or dietetic interventions in a chronic kidney disease population in order to known which of these variables was statistically related to changes in RRI and therefore could become the object of the greatest therapeutic effort. This study was undertaken between May 2016 to May 2017 in the outpatient nephrology and urology clinic of San Donato Hospital in Arezzo. The study population (84 patients: 47 males and 37 females) was randomly selected among the chronic kidney patients (with various degrees of renal impairment) affected by hypertension and or diabetes mellitus. After a comprehensive medical examination these patients were submitted to determination of serum creatinine, glycated hemoglobin, 24-hour urinary albumin excretion and finally renal Doppler ultrasonography. Then the patients were submitted to a full therapeutic and dietetic intervention to ameliorate the renal impairment by a wide range of actions and after on average a one-year interval were submitted again to a new medical examination and a second determination of serum creatinine, glycated hemoglobin, 24-hour urinary albumin excretion and a new renal Doppler ultrasonography too. The comparison between basal and final data revealed a slight reduction in the mean of bilateral renal resistance indices (Delta RRI: -0.0182 ± 0.08), associated to a slight increase in the mean glomerular filtration rate (Delta GFR: 0.8738 ± 10.95 ml/min/1.73 m2), a reduction in mean body weight (Delta weight: -1.9548 ± 5.26 Kg) and mean BMI (Delta BMI: -0.7643 ± 2.10 Kg/m2) as well as a reduction in the mean systolic blood pressure (Delta systolic blood pressure: -8.8333 ± 25.19 mmHg). Statistical analysis showed statistically significant correlations (p chronic renal failure and as a valuable tool to drive the clinical

  14. Determination and Distribution of Critical Loads: Application to the Forest Soils in the Autonomous Region of Madrid; Determinacion y Distribucion de Cargas Criticas: Aplicacion a los Suelos forestales de la comunidad Autonoma de Madrid

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, M.; Schmid, T.; Rabago, I. [Ciemat, Madrid (Spain)

    2000-07-01

    The critical loads of acidity and sulphur have been determined for forest soils within the north and north-west of the Autonomous Region of Madrid. The SMB-CCE and SMB-PROFILE Steady state models have been applied using a 1 km x 1 km resolution. the forest ecosystems have been characterised according to the soil and forest type, slope and climatic data using a Geographic Information System. In order to estimate the critical loads, processes such as weathering rate of the parent material, atmospheric deposition, critical alkalinity leaching rate and nutrients absorbed by the vegetation have been considered. In general the forest soils present high critical load values for acidity and sulphur. The more sensitive zones are found in the north of the Sierra of Guadarrama. Independent of the applied methods, the results are associated to the types of soils where Leptosols have the lowest. Cambisoles and Regosoles intermediate and luvisoles the most elevated values. (Author) 40 refs.

  15. Thermal load determination in the mixing TEE impacted by a turbulent flow generated by two fluids at large gap of temperature

    International Nuclear Information System (INIS)

    Braillard, O.

    2005-01-01

    A 304L mixing tee mock-up is instrumented to assess the fluctuating temperature in the mixing area generated by two fluids (water) at large gap of temperature meet. The turbulent mixing layer impacts the structure wall and creates stresses, which lead to the damages. The case studied in this paper corresponds to the 'swinging streak' within a flow rate ratio of 25 %. The instrumentation is specifically planned to measure the fluctuating temperature in the fluid close to the internal skin and inside the wall too. This experiment is performed using a new sensor 'fluxmeter' which is non intrusive and typically designed to catch the fluctuation without any signal attenuation, within a frequency range 0-25Hz. The facility called 'Fatherino' supplies an available delta T of 70 degree C in water at 4 m/s mixture velocity in a mixing tee mock-up 50 mm in diameter. The flow features generate a large turbulent flow in the mixing layer and favour the heat flux transfer to the wall. By applying an inverse heat conduction method applied to the output data given by the fluxmeter, both the heat flux is deduced and the temperature (mean and fluctuating values) at the internal surface can be accurately determined. In addition, a calculation using the Trio U code (thermal hydraulic code) within the large eddy simulation module is computed to assess the fluid temperature distribution in the mixing area close to the internal surface. The output data in mean and standard deviation are compared with the Fatherino measurements. The comparison consists in analysing the main parameters as the mean and standard deviation in the fluid along the main axis and in a circumferential view. The mixing layer geometry and the frequency of the fluctuation are also analysed. These experiments added to the calculation allow us improving the state of the knowledge in the mixing tees and the thermal load to be used in the industrial mixing tees in operating for the long lifetime assessment or for the

  16. Determining

    Directory of Open Access Journals (Sweden)

    Bahram Andarzian

    2015-06-01

    Full Text Available Wheat production in the south of Khuzestan, Iran is constrained by heat stress for late sowing dates. For optimization of yield, sowing at the appropriate time to fit the cultivar maturity length and growing season is critical. Crop models could be used to determine optimum sowing window for a locality. The objectives of this study were to evaluate the Cropping System Model (CSM-CERES-Wheat for its ability to simulate growth, development, grain yield of wheat in the tropical regions of Iran, and to study the impact of different sowing dates on wheat performance. The genetic coefficients of cultivar Chamran were calibrated for the CSM-CERES-Wheat model and crop model performance was evaluated with experimental data. Wheat cultivar Chamran was sown on different dates, ranging from 5 November to 9 January during 5 years of field experiments that were conducted in the Khuzestan province, Iran, under full and deficit irrigation conditions. The model was run for 8 sowing dates starting on 25 October and repeated every 10 days until 5 January using long-term historical weather data from the Ahvaz, Behbehan, Dezful and Izeh locations. The seasonal analysis program of DSSAT was used to determine the optimum sowing window for different locations as well. Evaluation with the experimental data showed that performance of the model was reasonable as indicated by fairly accurate simulation of crop phenology, biomass accumulation and grain yield against measured data. The normalized RMSE were 3%, 2%, 11.8%, and 3.4% for anthesis date, maturity date, grain yield and biomass, respectively. Optimum sowing window was different among locations. It was opened and closed on 5 November and 5 December for Ahvaz; 5 November and 15 December for Behbehan and Dezful;and 1 November and 15 December for Izeh, respectively. CERES-Wheat model could be used as a tool to evaluate the effect of sowing date on wheat performance in Khuzestan conditions. Further model evaluations

  17. Status of load management

    Energy Technology Data Exchange (ETDEWEB)

    Juchymenko, A

    1983-08-01

    A summary is presented of the status of load management, defined as any activity by an electric utility to affect the size and characteristics of its load. Load management is currently viewed by electric utilities as an important tool for marketing electricity in a competitive fuel situation. A major aim of the National Energy Program is to reduce Canada's dependence on oil by 1990 to 10% of the energy used by all markets. As a result, electricity may play a greater role in the supply of primary energy. Research in load management has been directed mostly towards the residential market, especially direct control of domestic hot water heaters and air conditioners. Studies conducted in Canada and the U.S. to determine user's receptiveness to direct control of loads and thermal energy storage systems indicate that these load management techniques are in most cases not acceptable to customers, who prefer voluntary reduction in demand. The potential exists in the industrial market to use load management to assist in electrifying many of the fossil fuel-fired processes at competitive energy prices. Some of the more important applications include an industrial heat pump to heat liquids to 120{degree}C, induction heating for melting and heat treating of metals, and mechanical vapor recompression equipment to produce proces steam. 21 refs., 2 figs., 2 tabs.

  18. Determination of Flower Constancy in Bombus atratus Franklin and Bombus bellicosus Smith (Hymenoptera: Apidae) through Palynological Analysis of Nectar and Corbicular Pollen Loads.

    Science.gov (United States)

    Rossi, N; Santos, E; Salvarrey, S; Arbulo, N; Invernizzi, C

    2015-12-01

    The flower constancy (the visit to a single plant species during a foraging trip) in pollinator insects is a theme widely discussed in behavioral ecology and has an important implication in the evolution of angiosperms. This behavior was studied in the bumblebees Bombus atratus Franklin and Bombus bellicosus Smith through palynological analysis of the nectar and pollen loads of individuals captured while foraging in a restricted area. In both species, there were more individuals with constant flights than with non-constant ones, although in the nectar loads of B. atratus there were no significant differences between individuals with each flight types. It was verified that the nectar loads of the individuals that made either constant or non-constant flights did not differ in the number of pollen grains they contained. Considering this measurement as an estimate for flight duration, the results would indicate that the probability of changing between plant species during nectar collection is independent of the foraging trip duration. In both species, most individuals who collected nectar and/or pollen from more than one plant species visited just two plant species. In these cases, the pollen of one plant species was predominant. In the bumblebees in which it was possible to analyze nectar and pollen loads, the botanical origin of both resources was the same or they shared the principal species (with the exception of two individuals), showing that bumblebees do not often use a botanical source in an exclusive way to collect nectar and another to collect pollen.

  19. System and method employing a minimum distance and a load feature database to identify electric load types of different electric loads

    Science.gov (United States)

    Lu, Bin; Yang, Yi; Sharma, Santosh K; Zambare, Prachi; Madane, Mayura A

    2014-12-23

    A method identifies electric load types of a plurality of different electric loads. The method includes providing a load feature database of a plurality of different electric load types, each of the different electric load types including a first load feature vector having at least four different load features; sensing a voltage signal and a current signal for each of the different electric loads; determining a second load feature vector comprising at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the different electric loads; and identifying by a processor one of the different electric load types by determining a minimum distance of the second load feature vector to the first load feature vector of the different electric load types of the load feature database.

  20. The capacity-load model of non-communicable disease risk: understanding the effects of child malnutrition, ethnicity and the social determinants of health.

    Science.gov (United States)

    Wells, Jonathan C K

    2018-05-01

    The capacity-load model is a conceptual model developed to improve understanding of the life-course aetiology of non-communicable diseases (NCDs) and their ecological and societal risk factors. The model addresses continuous associations of both (a) nutrition and growth patterns in early life and (b) lifestyle factors at older ages with NCD risk. Metabolic capacity refers to physiological traits strongly contingent on early nutrition and growth during the first 1000 days, which promote the long-term capacity for homeostasis in the context of fuel metabolism and cardiovascular health. Metabolic load refers to components of nutritional status and lifestyle that challenge homeostasis. The higher the load, and the lower the capacity, the greater the NCD risk. The model therefore helps understand dose-response associations of both early development and later phenotype with NCD risk. Infancy represents a critical developmental period, during which slow growth can constrain metabolic capacity, whereas rapid weight gain may elevate metabolic load. Severe acute malnutrition in early childhood (stunting, wasting) may continue to deplete metabolic capacity, and confer elevated susceptibility to NCDs in the long term. The model can be applied to associations of NCD risk with socio-economic position (SEP): lower SEP is generally associated with lower capacity but often also with elevated load. The model can also help explain ethnic differences in NCD risk, as both early growth patterns and later body composition differ systematically between ethnic groups. Recent work has begun to clarify the role of organ development in metabolic capacity, which may further contribute to ethnic differences in NCD risk.

  1. Non-specific low back pain in primary care in the Spanish National Health Service: a prospective study on clinical outcomes and determinants of management

    Directory of Open Access Journals (Sweden)

    Muriel Alfonso

    2006-05-01

    Full Text Available Abstract Background The Spanish National Health Service is a universal and free health care system. Non-specific low back pain (LBP is a prevalent disorder, generating large health and social costs. The objectives of this study were to describe its management in primary care, to assess patient characteristics that influence physicians' decisions, and to describe clinical outcome at 2 months. Methods A cross-sectional sample of 648 patients with non-specific low back pain was recruited by 75 physicians (out of 361 – 20.8% working in 40 primary care centers in 10 of the 17 administrative regions in Spain, covering 693,026 out of the 40,499,792 inhabitants. Patients were assessed on the day they were recruited, and prospectively followed-up 14 and 60 days later. The principal patient characteristics that were analyzed were: sex, duration of the episode, history of LBP, working status, severity of LBP, leg pain and disability, and results of straight leg raising test. Descriptors of management were: performance of the straight leg raising test, ordering of diagnostic procedures, prescription of drug treatment, referral to physical therapy, rehabilitation or surgery, and granting of sick leave. Regression analysis was used to analyze the relationship between patients' baseline characteristics and physicians' management decisions. Only workers were included in the models on sick leave. Results Mean age (SD of included patients was 46.5 (15.5 years, 367 (56.6% were workers, and 338 (52.5% were females. Median (25th–75th interquartile range duration of pain when entering the study was 4 (2–10 days and only 28 patients (4.3% had chronic low back pain. Diagnostic studies included plain radiographs in 43.1% of patients and CT or MRI scans in 18.8%. Drug medication was prescribed to 91.7% of patients, 19.1% were sent to physical therapy or rehabilitation, and 9.6% were referred to surgery. The main determinants of the clinical management were duration

  2. The Amsterdam Studies of Acute Psychiatry I (ASAP-I; A prospective cohort study of determinants and outcome of coercive versus voluntary treatment interventions in a metropolitan area

    Directory of Open Access Journals (Sweden)

    Mulder Niels

    2008-05-01

    Full Text Available Abstract Background The overall number of involuntary admissions is increasing in many European countries. Patients with severe mental illnesses more often progress to stages in which acute, coercive treatment is warranted. The number of studies that have examined this development and possible consequences in terms of optimizing health care delivery in emergency psychiatry is small and have a number of methodological shortcomings. The current study seeks to examine factors associated with compulsory admissions in the Amsterdam region, taking into account a comprehensive model with four groups of predictors: patient vulnerability, social support, responsiveness of the health care system and treatment adherence. Methods/Design This paper describes the design of the Amsterdam Study of Acute Psychiatry-I (ASAP-I. The study is a prospective cohort study, with one and two-year follow-up, comparing patients with and without forced admission by means of a selected nested case-control design. An estimated total number of 4,600 patients, aged 18 years and over, consecutively coming into contact with the Psychiatric Emergency Service Amsterdam (PESA are included in the study. From this cohort, a randomly selected group of 125 involuntary admitted subjects and 125 subjects receiving non-coercive treatment are selected for further evaluation and comparison. First, socio-demographic, psychopathological and network characteristics, and prior use of health services will be described for all patients who come into contact with PESA. Second, the in-depth study of compulsory versus voluntary patients will examine which patient characteristics are associated with acute compulsory admission, also taking into account social network and healthcare variables. The third focus of the study is on the associations between patient vulnerability, social support, healthcare characteristics and treatment adherence in a two-year follow-up for patients with or without

  3. Determination of the best method to estimate glomerular filtration rate from serum creatinine in adult patients with sickle cell disease: a prospective observational cohort study

    Directory of Open Access Journals (Sweden)

    Arlet Jean-Benoît

    2012-08-01

    Full Text Available Abstract Background Sickle cell disease (SCD leads to tissue hypoxia resulting in chronic organ dysfunction including SCD associated nephropathy. The goal of our study was to determine the best equation to estimate glomerular filtration rate (GFR in SCD adult patients. Methods We conducted a prospective observational cohort study. Since 2007, all adult SCD patients in steady state, followed in two medical departments, have had their GFR measured using iohexol plasma clearance (gold standard. The Cockcroft-Gault, MDRD-v4, CKP-EPI and finally, MDRD and CKD-EPI equations without adjustment for ethnicity were tested to estimate GFR from serum creatinine. Estimated GFRs were compared to measured GFRs according to the graphical Bland and Altman method. Results Sixty-four SCD patients (16 men, median age 27.5 years [range 18.0-67.5], 41 with SS-genotype were studied. They were Sub-Saharan Africa and French West Indies natives and predominantly lean (median body mass index: 22 kg/m2 [16-33]. Hyperfiltration (defined as measured GFR >110 mL/min/1.73 m2 was detected in 53.1% of patients. Urinary albumin/creatinine ratio was higher in patients with hyperfiltration than in patients with normal GFR (4.05 mg/mmol [0.14-60] versus 0.4 mg/mmol [0.7-81], p = 0.01. The CKD-EPI equation without adjustment for ethnicity had both the lowest bias and the greatest precision. Differences between estimated GFRs using the CKP-EPI equation and measured GFRs decreased with increasing GFR values, whereas it increased with the Cockcroft-Gault and MDRD-v4 equations. Conclusions We confirm that SCD patients have a high rate of glomerular hyperfiltration, which is frequently associated with microalbuminuria or macroalbuminuria. In non-Afro-American SCD patients, the best method for estimating GFR from serum creatinine is the CKD-EPI equation without adjustment for ethnicity. This equation is particularly accurate to estimate high GFR values, including glomerular

  4. Beam loading

    CERN Document Server

    Gamp, Alexander

    2013-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed.

  5. Beam loading

    International Nuclear Information System (INIS)

    Gamp, Alexander

    2013-01-01

    We begin by giving a description of the radio-frequency generator-cavity-beam coupled system in terms of basic quantities. Taking beam loading and cavity detuning into account, expressions for the cavity impedance as seen by the generator and as seen by the beam are derived. Subsequently methods of beam-loading compensation by cavity detuning, radio-frequency feedback and feedforward are described. Examples of digital radio-frequency phase and amplitude control for the special case of superconducting cavities are also given. Finally, a dedicated phase loop for damping synchrotron oscillations is discussed. (author)

  6. Load sensor

    NARCIS (Netherlands)

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder

  7. Carbohydrate Loading.

    Science.gov (United States)

    Csernus, Marilyn

    Carbohydrate loading is a frequently used technique to improve performance by altering an athlete's diet. The objective is to increase glycogen stored in muscles for use in prolonged strenuous exercise. For two to three days, the athlete consumes a diet that is low in carbohydrates and high in fat and protein while continuing to exercise and…

  8. Multi-body simulation of various falling scenarios for determining resulting loads at the prosthesis interface of transfemoral amputees with osseointegrated fixation.

    Science.gov (United States)

    Welke, Bastian; Schwarze, Michael; Hurschler, Christof; Calliess, Tilman; Seehaus, Frank

    2013-07-01

    Conventionally, transfemoral amputees are treated with a shaft prosthesis fitted over the residual limb. To improve the quality of life of such patients, in particular those with complications relating to conventional attachment (e.g., skin irritation, stump ulcers, and poor motor-control with short stumps), osseointegrated prosthesis fixation implants have been developed and implanted in a limited population of patients. To assess possible damage to the implant/prosthesis during falling scenarios, the loads in high-risk situations were estimated using a multi-body simulation of motion. Five falling scenarios were identified and performed by healthy volunteer wearing safety equipment. Kinematic data and ground reaction forces were captured as input for the inverse-dynamics-based simulations, from which the forces and moments at a typical implant-prosthesis interface location were computed. The estimated peak loads in all five scenarios were of a magnitude that could lead to bone fracture. The largest peak force observed was 3274 ± 519 N, with an associated resultant moment of 176 ± 55 Nm on the prosthesis-implant interface. A typical femur is prone to fracture under this load, thus illustrating the need for a safety-release element in osseointegrated prosthesis fixation. Copyright © 2013 Orthopaedic Research Society.

  9. Fuel Load (FL)

    Science.gov (United States)

    Duncan C. Lutes; Robert E. Keane

    2006-01-01

    The Fuel Load method (FL) is used to sample dead and down woody debris, determine depth of the duff/ litter profile, estimate the proportion of litter in the profile, and estimate total vegetative cover and dead vegetative cover. Down woody debris (DWD) is sampled using the planar intercept technique based on the methodology developed by Brown (1974). Pieces of dead...

  10. Perspectives d'amélioration du rendement à très faible charge des moteurs d'automobile Prospects for Lmprovinq the Very-Low-Load Efficiency of Automotive Engines

    Directory of Open Access Journals (Sweden)

    Douaud A.

    2006-11-01

    Full Text Available Le mauvais rendement énergétique des véhicules utilisés à très faible charge (circulation urbaine, vitesses limitées provient entre autres des combustions non optimales. Celles-ci sont de plusieurs types : combustion lente et/ou tardive, ratés de propagation. L'acquisition de cycles de pression au moyen du système DIGITAP développé à l'In-titut Français du Pétrole (IFP est décrite et le calcul instantané du travail cycle-à-cycle permet de définir un critère de stabilité de fonctionnement du moteur. L'analyse thermodynamique des cycles montre que la composition du mélange air + carburant + gaz résiduels, trop proche des limites de propagabilité de flamme, est à l'origine des phénomènes observés. Des voies d'action portant sur les gaz résiduels, la turbulence et les paramètres du système d'allumage sont dégagées et permettent des améliorations importantes du rendement. The poor energy efficiency of vehicles used at very low engine load (urban traffic, limited speeds comes from non-optimum combustion, among other causes. Such combustion may be of several types, i. e. slow and/or late combustion, propagation misfiring. The recording of pressure cycles by the DIGITAP system developed at Institut Français du Pétrole (IFP is described, and the instantaneous computing of the cycle-to-cycle work enables a stability criterion for engine operating to be described. The thermodynamic analysis of the cycles shows that the composition of the air + fuel + residuel gas mixture which is too close to flame propagation limits is at the origin of the phenomena observed. Methods of action concerning residual gases, turbulence and the parameters of the ignition system are determined and make for great improvements in efficiency and stability for such types of running.

  11. BEYOND THE BRAND, SOCIAL INTERACTION AS KEY DETERMINANT OF IMPRESSION MANAGEMENT FOR CUSTOMERS‟ SATISFACTION AND BETTER BUSINESS PROSPECT : A STUDY ON STREET TRADERS

    OpenAIRE

    HARASANKAR ADHIKARI

    2012-01-01

    ABSTRACT: The present study examines how the street traders were operating their trade with their own style of impression management. The social interaction and hospitality had been the key tool of their impression management by which they had become their own brand. In present day marketing system with tremendous competition they were in their own prospect while they were in total uncertain position. Although they had no profession education they had learnt from their self strategies of thei...

  12. Endogenizing Prospect Theory's Reference Point

    OpenAIRE

    Ulrich Schmidt; Horst Zank

    2010-01-01

    In previous models of (cumulative) prospect theory reference-dependence of preferences is imposed beforehand and the location of the reference point is exogenously determined. This note provides a foundation of prospect theory, where reference-dependence is derived from preference conditions and a unique reference point arises endogenously.

  13. A Prospective Observational Study

    African Journals Online (AJOL)

    Methods: This was a prospective, questionnaire-based observational study. Printed questionnaires were distributed to the visitors of medical, surgical and neurosurgical ICU patients to determine awareness of basic infection control practices among visitors to an ICU. All the ICU staff, including nurses, doctors, consultant ...

  14. Determination of crack arrest toughness in A508 CL.3 forging steel from ASTM E1221-88 procedure. Comparison with the values obtained from thermal loading tests

    International Nuclear Information System (INIS)

    Frund, J.M.; Difant, M.; Bethmont, M.

    1994-01-01

    A crack arrest study is under way at Electricite de France as part of the analysis of the risk of fast fracture of PWR vessels in emergency conditions. The first objective of this study is to evaluate the toughness which characterizes crack arrest through tests on reduced-size specimens. Some of the tests on a forging steel (A508 Cl.3) were conducted in conformity with two experimental methods. One method recommended by the ASTM calls for the use of an imposed-displacement mechanical loading on specimens kept under homogeneous temperature. Since the stress intensity factor K applied to the outside loading decreases along the crack growth, we can observe the arrest of the crack. In order to obtain brittle crack initiations in cleavage in the whole studied range of temperature and crack propagation of a sufficient length, the application of a weld point at the top of the notch is done. The other experimental method is based on a thermal loading. It requires the use of a disk or a cylinder with a longitudinal initial crack of the external surface. We dip this specimen in liquid nitrogen and we heat its internal surface with inducing current. There is a temperature gradient in the thickness of the specimen which produces a stress field which tends to open the crack. When the value of K is reached the crack initiation takes place. Several phenomena act to oppose the crack growth, they even go as far as stopping it. First the value of K, after increasing, gets steady then decreases, then, the rate of energy dissipated by plasticity at the top of the crack increases because the crack meets warmer and warmer areas on its way. The arrest toughness values which were obtained were then analyzed and compared to one another and with values proposed by RCC-m code. (authors). 12 refs., 11 figs., 3 tabs

  15. Load sensor

    OpenAIRE

    Van den Ende, D.; Almeida, P.M.R.; Dingemans, T.J.; Van der Zwaag, S.

    2007-01-01

    The invention relates to a load sensor comprising a polymer matrix and a piezo-ceramic material such as PZT, em not bedded in the polymer matrix, which together form a compos not ite, wherein the polymer matrix is a liquid crystalline resin, and wherein the piezo-ceramic material is a PZT powder forming 30-60% by volume of the composite, and wherein the PZT powder forms 40-50% by volume of the composite.

  16. Determination of in vivo behavior of mitomycin C-loaded o/w soybean oil microemulsion and mitomycin C solution via gamma camera imaging.

    Science.gov (United States)

    Kotmakçı, Mustafa; Kantarcı, Gülten; Aşıkoğlu, Makbule; Ozkılıç, Hayal; Ertan, Gökhan

    2013-09-01

    In this study, a microemulsion system was evaluated for delivery of mitomycin C (MMC). To track the distribution of the formulated drug after intravenous administration, radiochemical labeling and gamma scintigraphy imaging were used. The aim was to evaluate a microemulsion system for intravenous delivery of MMC and to compare its in vivo behavior with that of the MMC solution. For microemulsion formulation, soybean oil was used as the oil phase. Lecithin and Tween 80 were surfactants and ethanol was the cosurfactant. To understand the whole body localization of MMC-loaded microemulsion, MMC was labeled with radioactive technetium and gamma scintigraphy was applied for visualization of drug distribution. Radioactivity in the bladder 30 minutes after injection of the MMC solution was observed, according to static gamma camera images. This shows that urinary excretion of the latter starts very soon. On the other hand, no radioactivity appeared in the urinary bladder during the 90 minutes following the administration of MMC-loaded microemulsion. The unabated radioactivity in the liver during the experiment shows that the localization of microemulsion formulation in the liver is stable. In the light of the foregoing, it is suggested that this microemulsion formulation may be an appropriate carrier system for anticancer agents by intravenous delivery in hepatic cancer chemotherapy.

  17. Determination of safety margins for creep loaded primary circuit components in case of loss of pressure accidents of a HTR plant (SR 383)

    International Nuclear Information System (INIS)

    Breitbach, G.; Ahmed, K.; Over, H.; Schubert, F.; Nickel, H.

    1991-10-01

    The wall thickness of tubes in high temperature plants must be limited in such a way that pressure differences can not produce unadmissible deformations. For HTR (PNP-Plant) the postulated loss of secondary pressure is one of the considered accidents. In that case the tubes of the heat exchangers are loaded by the outher pressure of the primary coolant. So the risk of a creep collapse is given. The report is related to experimental and theoretical work for the creep collapse phenomena. HTR relevant tube geometries of the high temperature alloys NiCr22Co12Mo (INCONEL 617) and X10NiCrAlTi 32 20 (INCOLOY 800) were tested at temperatures of 900 and 950deg C and outer pressure loads in the range 40 bars. The experimental results are compared with theoretically computed values and discussed. The problem of safety margin is treated. Further, simplified procedures are developed for the estimation of the collapse time. (orig.) [de

  18. Inexpensive Bolt-Load Gage

    Science.gov (United States)

    Long, M. J.

    1983-01-01

    "Built-in" gage determines whether large bolt or stud has been torqued to desired load and provides for continuous inspection to ensure proper load is being maintained. Gage detects longitudinal stress/strain bolt; requires no electronic or sonic test equipment.

  19. Biophysical Mechanistic Modelling Quantifies the Effects of Plant Traits on Fire Severity: Species, Not Surface Fuel Loads, Determine Flame Dimensions in Eucalypt Forests.

    Science.gov (United States)

    Zylstra, Philip; Bradstock, Ross A; Bedward, Michael; Penman, Trent D; Doherty, Michael D; Weber, Rodney O; Gill, A Malcolm; Cary, Geoffrey J

    2016-01-01

    The influence of plant traits on forest fire behaviour has evolutionary, ecological and management implications, but is poorly understood and frequently discounted. We use a process model to quantify that influence and provide validation in a diverse range of eucalypt forests burnt under varying conditions. Measured height of consumption was compared to heights predicted using a surface fuel fire behaviour model, then key aspects of our model were sequentially added to this with and without species-specific information. Our fully specified model had a mean absolute error 3.8 times smaller than the otherwise identical surface fuel model (p fire severity are the species of plants present rather than the surface fuel load, and demonstrate the accuracy and versatility of the model for quantifying this.

  20. Prospect of ultralight airplanes development

    Directory of Open Access Journals (Sweden)

    Adam KONICZEK

    2015-09-01

    Full Text Available The article presents characteristic of ultralight airplanes, rules and current interest of them. The purpose is to determine prospect of ultralight airplanes development on the basis of Civil Aviation Authority statistics analysis and trend of aviation market.

  1. Concurrent Working Memory Load Can Facilitate Selective Attention: Evidence for Specialized Load

    Science.gov (United States)

    Park, Soojin; Kim, Min-Shik; Chun, Marvin M.

    2007-01-01

    Load theory predicts that concurrent working memory load impairs selective attention and increases distractor interference (N. Lavie, A. Hirst, J. W. de Fockert, & E. Viding, see record 2004-17825-003). Here, the authors present new evidence that the type of concurrent working memory load determines whether load impairs selective attention or not.…

  2. Determination of small amounts of nitric acid in the presence of large amounts of uranium (VI) and extraction of nitric acid into TBP solutions highly loaded with uranyl nitrate

    International Nuclear Information System (INIS)

    Kolarik, Z.; Schuler, R.

    1982-10-01

    A new method for the determination of small amounts of nitric acid in the presence of large amounts of uranium(VI) was elaborated. The method is based on the precipitation of uranium(VI) as iodate and subsequent alkalimetric titration of the acid in the supernatant. The extraction of nitric acid and uranium(VI) with 30% TBP in dodecane was studied at high loading of the organic phase with uranyl nitrate and at 25, 40 and 60 0 C. The results are compared with available published data on the extraction of nitric acid under similar conditions. (orig.) [de

  3. Exercise and diet determinants of overweight women participating in an exercise and diet program: a prospective examination of the theory of planned behavior.

    Science.gov (United States)

    Gardner, Rebecca Ellis; Hausenblas, Heather A

    2005-01-01

    The purpose of this study was to examine prospectively the ability of direct and belief-based measures of the theory of planned behavior (TPB) constructs to predict exercise and diet intention and behavior of overweight women. Participants were 117 overweight, community-dwelling women and university students enrolled in a 4-week exercise and diet program. Participants completed baseline measures of demographic characteristics and the TPB constructs. Their exercise and diet adherence were also recorded. We found that: (1) the direct measure of perceived behavioral control (PBC) predicted exercise intention, (2) the direct measures of instrumental attitude, subjective norm, and PBC predicted diet intention, and (3) none of the direct or belief-based measures of the TPB constructs predicted 4-week exercise or diet behavior. Furthermore, several beliefs were associated with the direct measures of attitude, subjective norm, PBC, and intention. Implications of these results for designing exercise and diet interventions with overweight women are discussed.

  4. Determinants of fertility and reproductive success after hysteroscopic septoplasty for women with unexplained primary infertility: a prospective analysis of 88 cases.

    Science.gov (United States)

    Shokeir, Tarek; Abdelshaheed, Mahmoud; El-Shafie, Mohamed; Sherif, Lotfy; Badawy, Ahmed

    2011-03-01

    To evaluate prospectively the effect of hysteroscopic septoplasty as therapy for unexplained primary infertility in women with uterine septum as a sole cause for reproductive failure and to define the factors influencing reproductive success. In a prospective comparative study, we enrolled 103 infertile women with uterine septum as a sole cause for reproductive failure. They had had unexplained primary infertility >2 years and a follow-up >12 months. Uterine anomalies were diagnosed by means of hysterosalpingography (HSG) and 2D-transvaginal sonography (TVS) with intrauterine saline infusion. Hysteroscopic septoplasty was performed in the early follicular phase. Pregnancy rates (PR) according to patient and septum characteristics (septum size) were the main outcome measures. Follow-up was complete for 88 patients. The mean (±SD) age of the patients was 36.1±2.1 years. Forty-two patients became pregnant (40.7%). The mean (±SD) delay in conception was 7.5±2.6 months. Nearly 80% of the pregnant women conceived spontaneously. Of 44 pregnancies in 42 women, 36 live newborns were delivered. The PR was significantly higher in women size larger than one-half of their uterine length the PR was significantly higher than those with septum size uterine septum as a sole cause for reproductive failure seems to depend on patient age, duration of infertility before septoplasty, and septum size. Women with a septum size larger than one-half of their uterine length have a higher chance of successful pregnancy after hysteroscopic septoplasty. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  5. Caenorhabditis elegans as an alternative in vivo model to determine oral uptake, nanotoxicity, and efficacy of melatonin-loaded lipid-core nanocapsules on paraquat damage.

    Science.gov (United States)

    Charão, Mariele Feiffer; Souto, Caroline; Brucker, Natália; Barth, Anelise; Jornada, Denise S; Fagundez, Daiandra; Ávila, Daiana Silva; Eifler-Lima, Vera L; Guterres, Silvia S; Pohlmann, Adriana R; Garcia, Solange Cristina

    2015-01-01

    Caenorhabditis elegans is an alternative in vivo model that is being successfully used to assess the pharmacological and toxic effects of drugs. The exponential growth of nanotechnology requires the use of alternative in vivo models to assess the toxic effects of theses nanomaterials. The use of polymeric nanocapsules has shown promising results for drug delivery. Moreover, these formulations have not been used in cases of intoxication, such as in treatment of paraquat (PQ) poisoning. Thus, the use of drugs with properties improved by nanotechnology is a promising approach to overcome the toxic effects of PQ. This research aimed to evaluate the absorption of rhodamine B-labeled melatonin (Mel)-loaded lipid-core nanocapsules (LNC) by C. elegans, the application of this model in nanotoxicology, and the protection of Mel-LNC against PQ damage. The formulations were prepared by self-assembly and characterized by particle sizing, zeta potential, drug content, and encapsulation efficiency. The results demonstrated that the formulations had narrow size distributions. Rhodamine B-labeled Mel-LNC were orally absorbed and distributed in the worms. The toxicity assessment of LNC showed a lethal dose 50% near the highest dose tested, indicating low toxicity of the nanocapsules. Moreover, pretreatment with Mel-LNC significantly increased the survival rate, reduced the reactive oxygen species, and maintained the development in C. elegans exposed to PQ compared to those worms that were either untreated or pretreated with free Mel. These results demonstrated for the first time the uptake and distribution of Mel-LNC by a nematode, and indicate that while LNC is not toxic, Mel-LNC prevents the effects of PQ poisoning. Thus, C. elegans may be an interesting alternative model to test the nanocapsules toxicity and efficacy.

  6. Load and resistance factor design calibration to determine a resistance factor for the modification of the Kansas Department of Transportation-Engineering News Record formula : [technical summary].

    Science.gov (United States)

    2014-02-01

    The Kansas Department of Transportation (KDOT) has, in recent years, used a : variation of the Engineering News Record (ENR) formula to determine the capacity of : piles in the field. It was a concern that the KDOT-ENR formula was under-predicting : ...

  7. Load testing circuit

    DEFF Research Database (Denmark)

    2009-01-01

    A load testing circuit a circuit tests the load impedance of a load connected to an amplifier. The load impedance includes a first terminal and a second terminal, the load testing circuit comprising a signal generator providing a test signal of a defined bandwidth to the first terminal of the load...

  8. Korea prospects

    International Nuclear Information System (INIS)

    Wyman, V.

    1990-01-01

    Contacts between the South Korean nuclear industry and a combined United Kingdom mission representing AEA Technology and British Nuclear Fuels Limited (BNFL) are reported. Prospects for entering the Korean market in two areas are perceived. The first is waste management and the second is the Safe Integral Reactor (SIR), an advanced pressurized water reactor design. AEA Technology and three collaborators have been promoting SIR as an inherently safe reactor design. Korean interest could be expressed in financial backing for the building of SIR stations in Korea and the opportunity could arise for BNFL to win fuel supply contracts. (UK)

  9. Immediate occlusal loading of single lower molars using Brånemark System® Wide Platform TiUnite™ implants: a 5-year follow-up report of a prospective clinical multicenter study.

    Science.gov (United States)

    Calandriello, Roberto; Tomatis, Massimiliano

    2011-12-01

    Although not essential, molars hold their importance in terms of functional jaw stability, antagonist opposition, and support of facial height. Therefore, implant therapy is an attractive concept in molar areas. However, especially in the posterior mandible, the conventional two-stage surgical approach to implant therapy was reported to cause higher bone loss and/or higher implant failures with machined implants because of the peculiar anatomic and physiologic conditions of this area. As the TiUnite™ (Nobel Biocare AB, Göteborg, Sweden) surface results in faster bone healing than with machined-surface implants, it was hypothesized that this surface would also improve the performance of wide implants in posterior mandibles. Based on these assumptions, a protocol for immediately loaded implants for single molar replacement was developed. This paper aimed to report on the clinical and radiological performance of Brånemark System® TiUnite Wide Platform implants supporting single molars in the lower jaw, loaded immediately and followed for up to 5 years, and to assess if the benefit delivered by oxidized surfaces in the short run is also present after 5 years. The study includes 33 consecutive patients treated between March 2001 and September 2003 and monitored until September 2008 in two private dental offices. A total of 40 Brånemark System TiUnite Wide Platform MK III implants were placed. All implants were provided with provisional crowns in full centric occlusion at the time of surgery. Patients were clinically and radiologically followed up for up to 5 years. Two implant failed so that the cumulative success rate at 5 years was 95.0%. The mean marginal bone remodeling (n = 38) expressed as mesial plus distal value averages was -1.17 mm (SD ± 0.90) at the 5-year time point. Although limited by the number of patients treated in accordance with the protocol described, 5-year results encourage the use of immediately loaded single lower molars supported by Br

  10. Load Estimation from Natural input Modal Analysis

    DEFF Research Database (Denmark)

    Aenlle, Manuel López; Brincker, Rune; Canteli, Alfonso Fernández

    2005-01-01

    One application of Natural Input Modal Analysis consists in estimating the unknown load acting on structures such as wind loads, wave loads, traffic loads, etc. In this paper, a procedure to determine loading from a truncated modal model, as well as the results of an experimental testing programme...... estimation. In the experimental program a small structure subjected to vibration was used to estimate the loading from the measurements and the experimental modal space. The modal parameters were estimated by Natural Input Modal Analysis and the scaling factors of the mode shapes obtained by the mass change...

  11. Changes in resonance frequency analysis assessed by Osstell mentor during osseointegration: comparison between immediately loaded implants and control implants without load

    Directory of Open Access Journals (Sweden)

    M. González-Jaranay

    2014-10-01

    Full Text Available Aim: The aim of this prospective clinical study was to evaluate the changes in resonance frequency analysis (RFA, assessed by Osstell Mentor, obtaining information on the implant stability quotient (ISQ during implants tissue integration for immediately loaded and non-loaded control implants. Materials and methods: A total of 40 implants, 20 implants with no immediate loading (control and 20 immediately loaded implants (test, were placed in 15 patients. ISQ implants was evaluated at baseline and at 6 and 8 weeks. Provisional crowns were removed at 8 weeks, when the definitive restoration was placed. Data of control and test implants and maxillary and mandibular areas were statistically compared. Results: At 8 weeks, all implants were integrated and there were no major postoperative complications. A statistically significant difference was found only at baseline between test and control maxillary implants (p=0.009 but not at 6 or 8 weeks (p>0.05. Conclusion: Immediate loading procedures may be applied with primary stability ISQ values >60 and inserted with a force of ≥30 N. The Osstell Mentor RFA may offer an objective method to determine when implant stability is adequate for immediate loading.

  12. Odd-order o.d.f. expansion coefficient determination. Case of diffraction strain measurements on cubic materials under macrostress loading

    International Nuclear Information System (INIS)

    Brakman, C.M.

    1985-01-01

    Diffraction intensity pole figures are often used for the determination of orientation distribution function (o.d.f.) expansion coefficients. The intensity can be seen as a convolution of the o.d.f. times unity with respect to one rotation angle (about the direction of measurement). The 'normal' polycrystalline diffraction experiment only yields the even-order o.d.f. coefficients. The experiment itself imposes a centre of inversion even upon non-centrosymmetric crystals. Crystals may exhibit a centre of inversion themselves. The hkl and anti hanti kanti l contributions to the intensity are indistinguishable then owing to the centre of inversion. As a consequence, the odd-order coefficients cannot be determined. The mean value of a general physical property determined by means of diffraction can be taken as a convolution of the o.d.f. times the single-crystal value of the physical property with respect to the rotation angle mentioned before. The dependency of the physical property on the rotation angle leads to more information being extracted from the o.d.f. in the property's mean-value pole figure. Then, all o.d.f. coefficients may be present in the mean value, i.e. the measurement. Consequently, diffraction-line-shift strain pole figures exhibit even- and odd-order o.d.f. coefficients, present or induced centres of inversion notwithstanding. If the dependency of the single-crystal strain on the rotation angle is known no model of elastic polycrystal coupling is needed. However, this does not occur in practice. The present state of the art does not allow the Kroener model to be used for textured materials. In this paper the Reuss model is used. If the (applied) macrostresses are known, the o.d.f. coefficients can be obtained from the formulae presented. (orig.)

  13. Resveratrol-Loaded Polymeric Nanoparticles: Validation of an HPLC-PDA Method to Determine the Drug Entrapment and Evaluation of Its Antioxidant Activity

    OpenAIRE

    da Rocha Lindner, Gabriela; Khalil, Najeh Maissar; Mainardes, Rubiana Mara

    2013-01-01

    Poly(lactic acid) (PLA) and PLA-poly(ethylene glycol) (PLA-PEG) nanoparticles containing resveratrol (RVT) were developed, and their antioxidant activity was evaluated. An analytical method using high performance liquid chromatography (HPLC)/photodiode array (PDA) detection was also developed and validated for RVT determination in nanoparticles. The mobile phase consisted of methanol : water (51 : 49, v/v) flowed at 0.9 mL/min, and the PDA detector was set at wavelength of 306 nm. The mean di...

  14. Cost-effective flow injection amperometric system with metal nanoparticle loaded carbon nanotube modified screen printed carbon electrode for sensitive determination of hydrogen peroxide.

    Science.gov (United States)

    Reanpang, Preeyaporn; Themsirimongkon, Suwaphid; Saipanya, Surin; Chailapakul, Orawon; Jakmunee, Jaroon

    2015-11-01

    Various metal nanoparticles (NPs) decorated on carbon nanotube (CNT) was modified on the home-made screen printed carbon electrode (SPCE) in order to enhances sensitivity of hydrogen peroxide (H2O2) determination. The simple casting method was used for the electrode modification. The monometallic and bimetallic NPs modified electrodes were investigated for their electrochemical properties for H2O2 reduction. The Pd-CNT/SPCE is appropriated to measure the H2O2 reduction at a potential of -0.3 V, then this modified electrode was incorporated with a home-made flow through cell and applied in a simple flow injection amperometry (FI-Amp). Some parameters influencing the resulted modified electrode and the FI-Amp system were studied. The proposed detection system was able to detect H2O2 in the range of 0.1-1.0 mM, with detection limit of 20 µM. Relative standard deviation for 100 replicated injections of 0.6 mM H2O2 was 2.3%. The reproducibility of 6 electrodes preparing in 3 different lots was 8.2%. It was demonstrated for determination of H2O2 in disinfectant, hair colorant and milk samples. Recoveries in the range of 90-109% were observed. The developed system provided high stability, good repeatability, high sample throughput and low reagent consumption. Copyright © 2015 Elsevier B.V. All rights reserved.

  15. Uranium and thorium loadings determined by chemical and nondestructive methods in HTGR fuel rods for the Fort St. Vrain Early Validation Irradiation Experiment

    International Nuclear Information System (INIS)

    Angelini, P.; Rushton, J.E.

    1979-01-01

    The Fort St. Vrain Early Validation Irradiation Experiment is an irradiation test of reference and of improved High-Temperature Gas-Cooled Reactor fuels in the Fort St. Vrain Reactor. The irradiation test includes fuel rods fabricated at ORNL on an engineering scale fuel rod molding machine. Fuel rods were nondestructively assayed for 235 U content by a technique based on the detection of prompt-fission neutrons induced by thermal-neutron interrogation and were later chemically assayed by using the modified Davies Gray potentiometric titration method. The chemical analysis of the thorium content was determined by a volumetric titration method. The chemical assay method for uranium was evaluated and the results from the as-molded fuel rods agree with those from: (1) large samples of Triso-coated fissile particles, (2) physical mixtures of the three particle types, and (3) standard solutions to within 0.05%. Standard fuel rods were fabricated in order to evaluate and calibrate the nondestructive assay device. The agreement of the results from calibration methods was within 0.6%. The precision of the nondestructive assay device was established as approximately 0.6% by repeated measurements of standard rods. The precision was comparable to that estimated by Poisson statistics. A relative difference of 0.77 to 1.5% was found between the nondestructive and chemical determinations on the reactor grade fuel rods

  16. System and method employing a self-organizing map load feature database to identify electric load types of different electric loads

    Science.gov (United States)

    Lu, Bin; Harley, Ronald G.; Du, Liang; Yang, Yi; Sharma, Santosh K.; Zambare, Prachi; Madane, Mayura A.

    2014-06-17

    A method identifies electric load types of a plurality of different electric loads. The method includes providing a self-organizing map load feature database of a plurality of different electric load types and a plurality of neurons, each of the load types corresponding to a number of the neurons; employing a weight vector for each of the neurons; sensing a voltage signal and a current signal for each of the loads; determining a load feature vector including at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the loads; and identifying by a processor one of the load types by relating the load feature vector to the neurons of the database by identifying the weight vector of one of the neurons corresponding to the one of the load types that is a minimal distance to the load feature vector.

  17. A prospective study to determine the circumstances, incidence and outcome of cardiopulmonary resuscitation in a referral hospital in India, in relation to various factors

    Directory of Open Access Journals (Sweden)

    Muralidhar Joshi

    2015-01-01

    Full Text Available Background and Aims: Cardiac arrest has multifactorial aetiology and the outcome depends on timely and correct interventions. We decided to investigate the circumstances, incidence and outcome of cardiopulmonary resuscitation (CPR at a tertiary hospital in India, in relation to various factors, including extensive basic life support and advanced cardiac life support training programme for all nurses and doctors. Methods: It has been over a decade and a half with periodical updates and implementation of newer guidelines prepared by various societies across the world about CPR for both in-hospital and out-of hospital cardiac arrests (IHCA and OHCA. We conducted a prospective study wherein all cardiac arrests reported in the hospital consecutively for 12 months were registered for the study and followed their survival up to 1-year. Statistical analysis was performed by using Chi-square test for significant differences in proportions applied to various parameters of the study. Results: The main outcome measures were; (following CPR return of spontaneous circulation, survival for 24 h, survival from 24 h to 6 weeks or discharge, alive at 1-year. For survivors, an assessment was made about their cerebral performance and overall performance and accordingly graded. All these data were tabulated. Totally 419 arrests were reported in the hospital, out of which 413 were in-hospital arrests. Out of this 260 patients were considered for resuscitation, we had about 27 survivors at the end of 1-year follow-up (10.38%. Conclusion: We conclude by saying there are many factors involved in good clinical outcomes following IHCAs and these variable factors need to be researched further.

  18. Determinant Variables, Enteric Pathogen Burden, Gut Function and Immune-related Inflammatory Biomarkers Associated With Childhood Malnutrition: A Prospective Case-Control Study in Northeastern Brazil.

    Science.gov (United States)

    Lima, Aldo A M; Leite, Álvaro M; Di Moura, Alessandra; Lima, Noélia L; Soares, Alberto M; Abreu, Cláudia B; Filho, José Quirino; Mota, Rosa M S; Lima, Ila F N; Havt, Alexandre; Medeiros, Pedro H Q S; Prata, Mara M G; Guedes, Marjorie M; Cavalcante, Paloma A; Veras, Herlice N; Santos, Ana K S; Moore, Sean R; Pinkerton, Relana C; Houpt, Eric R; Guerrant, Richard L

    2017-12-01

    Malnutrition results in serious consequences for growth and cognitive development in children. We studied select child and maternal biologic factors, socioeconomic factors, enteric pathogenic burden and gut function biomarkers in 402 children 6-24 months of age in Northeastern Brazil. In this prospective case-control study, not being fed colostrum [odds ratio (OR): 3.29, 95% confidence interval (CI): 1.73-6.26], maternal age ≥18 years (OR: 1.88, 95% CI: 1.10-3.22) and no electric fan (OR: 2.46, 95% CI: 1.22-4.96) or bicycle (OR: 1.80, 95% CI: 1.10-2.95) in the household were positively associated, and higher birth weight (OR: 0.27, 95% CI: 0.19-0.38), larger head circumference (OR: 0.74, 95% CI: 0.66-0.82) and shortness of breath in the last 2 weeks (OR: 0.49, 95% CI: 0.27-0.90) were negatively associated with malnutrition. Subclinical enteric pathogen infections were common, and enteroaggregative Escherichia coli infections were more prevalent in malnourished children (P = 0.045). Biomarkers such as the lactulose-mannitol test, myeloperoxidase, neopterin and calprotectin were highly elevated in both malnourished and nourished children. Nourished children had a better systemic immune response than the malnourished children, as detected by elevated serum amyloid A-1 and soluble cluster of differentiation protein 14 biomarkers (P malnutrition in children. There was a substantial subclinical enteric pathogen burden, particularly with enteroaggregative E. coli, in malnourished children.

  19. Determinación de las propiedades físicas y carga crítica del aceite vegetal Jatropha curcas L // Determination of physical properties and critical load of Jatropha curcas L vegetable oil

    Directory of Open Access Journals (Sweden)

    Calixto Rodríguez-Martínez

    2012-09-01

    Full Text Available En el trabajo se determinaron las propiedades físicas y la carga critica del aceite de Jatropha curcas L, obtenido de las plantas cultivadas en la provincia de Guantánamo en Cuba. Estas propiedades fueron comparadas con las propiedades de otros aceites vegetales (aceite ricino, aceite de girasol, aceite de colza y aceite de soya usados como biolubricantes. Los resultados mostraron que las propiedades físicas del aceite de Jatropha curcas L fueron similares a la mayoría de los aceites vegetales. La carga crítica del aceite de la Jatropha curcas L ocupa una posición intermedia entre el aceite ricino y los aceites de girasol, colza y soya, lo cual permite asegurar que el aceite de Jatropha curcas L es un buen candidato para como biolubricante.Palabras claves: biolubricantes, aceites vegetales, Jatropha curcas L, propiedades físicas, carga crítica._______________________________________________________________________________AbstractIn this paper the physical properties and the critical load of the Jatropha curcas L oil, plantations located in Guantanamo province, Cuba were determined. These properties together with other vegetable oils (castor, sunflower, rapeseed and soybean oils used as biolubricant were compared. These results have showed that the physical properties of the Jatropha curcas L oil were similar to most of vegetable oils.The critical load of Jatropha curcas oil has an intermediate position just castor oil and sunflower, rapeseed and soybean oils. Jatropha curcas oil has good potential as the renewable energy as well as biolubricant feedstock.Key words: biolubricants, vegetable oils, Jatropha curcas L, physical properties, critical load.

  20. Determinación IN-SITU del factor de potencia y la eficiencia de motores asincrónicos a cargas parciales; Induction motor power factor and efficiency IN-SITU determination under partial loads.

    Directory of Open Access Journals (Sweden)

    Percy Rafael Viego Felipe

    2015-04-01

    Full Text Available Los motores asincrónicos trifásicos no siempre operan a plena carga y por lo tanto, el factor de potencia y la eficiencia se ven afectados. Determinar estos valores a diferentes cargas, es la base para programas ahorro en la industria y los servicios. En este trabajo se presentan procedimientos para la estimación del factor de potencia y la eficiencia a cargas parciales, con una precisión acorde a los propósitos ingenieriles, baja invasividad y sin implicar para el usuario complejidades de equipamiento o de adquisición y procesamiento de datos. Se ofrecen distintas variantes para la estimación del factor de potencia y la eficiencia, según los datos con que se cuente. Se comparan los resultados de los métodos propuestos con la información de catálogos comerciales. Se realiza un análisis con motores de distinta potencia y velocidad, que demuestra que se logra buena precisión para los propósitos señalados. Three phase induction motors are rarely operating at full load and, in consequence, power factor and efficiency are affected. Determining these values for different partial loads is needed for energy saving programs in industrial and service enterprises. In this work, procedures are given for power factor and efficiency estimation at different loads. These procedures are low or not-invasive, have a good precision for engineering purposes, and do not require neither complex equipment nor complicated acquisition and processing data systems Different ways for estimating the before mentioned parameters, depending on the known data, are given. The results of the proposed procedures are compared with those of manufacturer catalogs. A comparative analysis considering motors of different output power and speed is done, and it shows that the results are enough accurate for the established purposes.

  1. Heavy-Load Lifting

    DEFF Research Database (Denmark)

    Bloomquist, Kira; Oturai, Peter; Steele, Megan L

    2018-01-01

    of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal....... repetition maximum (RM), two sets of 15-20 repetitions) and heavy-load (85-90% 1RM, three sets of 5-8 repetition) upper-extremity resistance exercise separated by a one-week wash-out period. Swelling was determined by bioimpedance spectroscopy and dual energy x-ray absorptiometry, with breast cancer......-related lymphedema symptoms (heaviness, swelling, pain, tightness) reported using a numeric rating scale (0-10). Order of low- versus heavy-load was randomized. All outcomes were assessed pre-, immediately post-, and 24- and 72-hours post-exercise. Generalized estimating equations were used to evaluate changes over...

  2. The concept of target and critical loads

    International Nuclear Information System (INIS)

    Grigal, D.F.

    1991-09-01

    Target and critical loads were initially developed for assessment and control of acidic deposition, but are being considered for other air pollutants such as ozone and air-borne toxic compounds. These loads are based on thresholds, with damage assumed to occur above some defined level of deposition. Many of the historically proposed targets for acidic deposition were based on arbitrary interpretations of data. The concept of critical loads has recently separated from that of target loads. A critical load is the amount of pollutant deposition, determined by technical analysis, above which there is a specific deleterious ecological effect. A target load is the deposition, determined by political agreement, above which unacceptable ecological damage occurs; it may be greater than the critical load because of political or economic considerations, or less to conservatively account for uncertainty in the estimation of the critical load. Recent definitions of critical loads include recognition that each kind of ecosystem and effect may require a different load. Geographic regions contain a mosaic of aquatic and terrestrial resources. If precise knowledge leads to different critical loads for each system, then how is the regional target load established? For better or worse, target and critical loads are likely to be used to regulate air pollutants. The philosophy of their establishment as thresholds, their quantitative validity, and their application in regulation all require careful examination. 36 refs., 3 figs

  3. Energy prospects

    International Nuclear Information System (INIS)

    Lyall, K.

    1991-01-01

    The Business Council of Australia's study on Prospects for Improved Energy Efficiency and the Application of Renewable Energy Resources is summarised. The study estimates that replacement of all off-peak electric units in Australia with solar gas boosted systems would reduce electricity consumption for residential water heating by approximately 25% and almost halve carbon dioxide emissions resulting from residential water heating. Furthermore, substitution of all water heating units in Australia with solar gas systems would reduce total emissions by about 80%. The study concludes that while substitution on such a scale could not readily be achieved even within several decades, the estimates do indicate the significant benefits that might be realised by a long term program. 2 refs., 3 tabs

  4. Determinants for drug survival of methotrexate in patients with psoriasis, split according to different reasons for discontinuation: results of the prospective MTX-CAPTURE

    NARCIS (Netherlands)

    Otero, M.E.; Reek, J.M.P.A. van den; Seyger, M.M.B.; Kerkhof, P.C.M. van de; Kievit, W.; Jong, E.M.G.J. de

    2017-01-01

    BACKGROUND: As methotrexate (MTX) is a widely used treatment for psoriasis, it is important to gain insight into the reasons for the discontinuation of MTX and to understand the determinants for drug survival. OBJECTIVES: To describe 5-year drug survival for MTX in patients with psoriasis, split

  5. Inequities in energy-balance related behaviours and family environmental determinants in European children: baseline results of the prospective EPHE evaluation study

    NARCIS (Netherlands)

    Mantziki, Krystallia; Vassilopoulos, Achilleas; Radulian, Gabriella; Borys, Jean-Michel; du Plessis, Hugues; Gregório, Maria João; Graça, Pedro; de Henauw, Stefaan; Handjiev, Svetoslav; Visscher, Tommy Ls; Seidell, Jacob C

    2015-01-01

    BACKGROUND: Tackling inequalities in overweight, obesity and related determinants has become a top priority for the European research and policy agendas. Although it has been established that such inequalities accumulate from early childhood onward, they have not been studied extensively in

  6. Determinants of use of care provided by complementary and alternative health care practitioners to pregnant women in primary midwifery care : A prospective cohort study

    NARCIS (Netherlands)

    Feijen-de Jong, Esther I.; Jansen, Danielle E. M. C.; Baarveld, Frank; Spelten, Evelien; Schellevis, Francois; Reijneveld, Sijmen A.

    2015-01-01

    Background: Pregnant women visit complementary/alternative health care practitioners in addition to regular maternal health care practitioners. A wide variation has been reported with regard to rates and determinants of use of complementary/alternative medicine (CAM), which may be due to

  7. Climate control loads prediction of electric vehicles

    International Nuclear Information System (INIS)

    Zhang, Ziqi; Li, Wanyong; Zhang, Chengquan; Chen, Jiangping

    2017-01-01

    Highlights: • A model of vehicle climate control loads is proposed based on experiments. • Main climate control loads of the modeled vehicle are quantitatively analyzed. • Range reductions of the modeled vehicle under different conditions are simulated. - Abstract: A new model of electric vehicle climate control loads is provided in this paper. The mathematical formulations of the major climate control loads are developed, and the coefficients of the formulations are experimentally determined. Then, the detailed climate control loads are analyzed, and the New European Driving Cycle (NEDC) range reductions due to these loads are calculated under different conditions. It is found that in an electric vehicle, the total climate control loads vary with the vehicle speed, HVAC mode and blower level. The ventilation load is the largest climate control load, followed by the solar radiation load. These two add up to more than 80% of total climate control load in summer. The ventilation load accounts for 70.7–83.9% of total heating load under the winter condition. The climate control loads will cause a 17.2–37.1% reduction of NEDC range in summer, and a 17.1–54.1% reduction in winter, compared to the AC off condition. The heat pump system has an advantage in range extension. A heat pump system with an average heating COP of 1.7 will extend the range by 7.6–21.1% based on the simulation conditions.

  8. Radimetric autotransported prospecting survey

    International Nuclear Information System (INIS)

    Coco, A.L.; Azamor, L.A.; Agost, E.J.

    1977-10-01

    A procedure of prospection of minerals (''carborne''). It is characterized to be rapid and low costly if a sufficiently dense highway network is available or if transit with a vehicle across the fields is possible. Instruments, methods and results that may be obtained are given. The detector, a scintillation counter, is mounted on the top of an appropiate car registering continuously the measured values. Subsequently data are put on cartography, obtaining thus the values of iso-radiactivity which determine the values of ''background'' and the favorable zones for pursuing prospection work by other methods. The application of the method to the zone of the Chihuidos, province of Neuquen, is described in details and the obtained conclusions are given. (author) [es

  9. Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

    International Nuclear Information System (INIS)

    Bauer, Mathieu; Broekaert, Jose A.C.

    2007-01-01

    The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L -1 Na, K, Rb and Ba as matrix elements and 300 μg L -1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers

  10. Distribution load estimation (DLE)

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A; Lehtonen, M [VTT Energy, Espoo (Finland)

    1998-08-01

    The load research has produced customer class load models to convert the customers` annual energy consumption to hourly load values. The reliability of load models applied from a nation-wide sample is limited in any specific network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to find improvements to the load models or, in general, improvements to the load estimates. In Distribution Load Estimation (DLE) the measurements from the network are utilized to improve the customer class load models. The results of DLE will be new load models that better correspond to the loading of the distribution network but are still close to the original load models obtained by load research. The principal data flow of DLE is presented

  11. Inequities in energy-balance related behaviours and family environmental determinants in European children: baseline results of the prospective EPHE evaluation study.

    Science.gov (United States)

    Mantziki, Krystallia; Vassilopoulos, Achilleas; Radulian, Gabriella; Borys, Jean-Michel; Du Plessis, Hugues; Gregório, Maria João; Graça, Pedro; De Henauw, Stefaan; Handjiev, Svetoslav; Visscher, Tommy Ls; Seidell, Jacob C

    2015-12-02

    Tackling inequalities in overweight, obesity and related determinants has become a top priority for the European research and policy agendas. Although it has been established that such inequalities accumulate from early childhood onward, they have not been studied extensively in children. The current article discusses the results of an explorative analysis for the identification of inequalities in behaviours and their determinants between groups with high and low socio-economic status. This study is part of the Epode for the Promotion of Health Equity (EPHE) evaluation study, the overall aim of which is to assess the impact and sustainability of EPODE methodology to diminish inequalities in childhood obesity and overweight. Seven community-based programmes from different European countries (Belgium, Bulgaria, France, Greece, Portugal, Romania, The Netherlands) participate in the EPHE study. In each of the communities, children aged 6-8 years participated, resulting in a total sample of 1266 children and their families. A parental self-administrated questionnaire was disseminated in order to assess the socio-economic status of the household, selected energy balance-related behaviours (1. fruit and vegetable consumption; 2. soft drink/ fruit juices and water consumption; 3. screen time and 4. sleep duration) of the children and associated family environmental determinants. The Mann-Whitney U test and Pearson's chi-square test were used to test differences between the low and high education groups. The country-specific median was chosen as the cut-off point to determine the educational level, given the different average educational level in every country. Children with mothers of relatively high educational level consumed fruits and vegetables more frequently than their peers of low socio-economic status. The latter group of children had a higher intake of fruit juices and/or soft drinks and had higher screen time. Parental rules and home availability were

  12. Magnetoelastic Demagnetization of Steel under Cyclic Loading

    Science.gov (United States)

    Muratov, K. R.; Novikov, V. F.; Neradovskii, D. F.; Kazakov, R. Kh.

    2018-01-01

    Magnetoelastic demagnetization of steel samples under cyclic tensile loads has been analyzed. It has been established that values of residual magnetization that correspond to peak loads are characterized by the power-law dependence on the number of loading cycles. In some cases, in the region of high loads, the qualitative transition to exponential dependence has been observed. Coefficients of the power-law approximation of peak magnetization depend on the value of amplitude load and have specific characteristics in the vicinity of characteristic loads. The ratios of approximated slide load coefficients depending on the load are common for the three considered samples, and there is an outburst in the vicinity of the fatigue limit, which can be used as the basis for developing the rapid nondestructive method for determination of this limit.

  13. Perceptual Load Affects Eyewitness Accuracy and Susceptibility to Leading Questions

    OpenAIRE

    Murphy, Gillian; Greene, Ciara M.

    2016-01-01

    Load Theory (Lavie, 1995, 2005) states that the level of perceptual load in a task (i.e., the amount of information involved in processing task-relevant stimuli) determines the efficiency of selective attention. There is evidence that perceptual load affects distractor processing, with increased inattentional blindness under high load. Given that high load can result in individuals failing to report seeing obvious objects, it is conceivable that load may also impair memory for the scene. The ...

  14. Perceptual Load Affects Eyewitness Accuracy & Susceptibility to Leading Questions

    OpenAIRE

    Gillian Murphy; Ciara Mary Greene

    2016-01-01

    Load Theory (Lavie, 1995; 2005) states that the level of perceptual load in a task (i.e. the amount of information involved in processing task-relevant stimuli) determines the efficiency of selective attention. There is evidence that perceptual load affects distractor processing, with increased inattentional blindness under high load. Given that high load can result in individuals failing to report seeing obvious objects, it is conceivable that load may also impair memory for the scene. The c...

  15. Spatial electric load forecasting

    CERN Document Server

    Willis, H Lee

    2002-01-01

    Containing 12 new chapters, this second edition contains offers increased-coverage of weather correction and normalization of forecasts, anticipation of redevelopment, determining the validity of announced developments, and minimizing risk from over- or under-planning. It provides specific examples and detailed explanations of key points to consider for both standard and unusual utility forecasting situations, information on new algorithms and concepts in forecasting, a review of forecasting pitfalls and mistakes, case studies depicting challenging forecast environments, and load models illustrating various types of demand.

  16. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A. [VTT Energy, Espoo (Finland)

    1996-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  17. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A [VTT Energy, Espoo (Finland)

    1997-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  18. Actual exclusive breastfeeding rates and determinants among a cohort of children living in Gampaha district Sri Lanka: A prospective observational study

    Directory of Open Access Journals (Sweden)

    Perera Priyantha J

    2012-12-01

    Full Text Available Abstract Background Exclusive breastfeeding (EBF during the early months of life reduce infant morbidity and mortality. Current recommendation in Sri Lanka is to continue exclusive breastfeeding up to six months of age. Exclusive breastfeeding rates are generally assessed by the 24 recall method which overestimates the actual rates. The objective of this study was to determine actual exclusive breast feeding rates in a cohort of Sri Lankan children and to determine the reasons that lead to cessation of breastfeeding before six months of age. Methods From a cohort of 2215 babies born in Gampaha district, 500 were randomly selected and invited for the study. They were followed up at two (n = 404, four (n = 395 and six (n = 286 months. An interviewer administered questionnaire asked about feeding history and socio-demographic characteristics. Child health development record was used to assess the growth. Results Exclusive breastfeeding rates at two, four and six months were 98.0%, 75.4% and 71.3% respectively. The main reasons to stop exclusive breastfeeding between two to four months was concerns regarding weight gain and between four to six months were mothers starting to work. Majority of the babies that were not exclusively breastfed still continued to have breast milk. Mothers above 30 years had lower exclusive breastfeeding rates compared to younger mothers. Second born babies had higher rates than first borns. There was no significant association between maternal education and exclusive breastfeeding rates. Conclusions Exclusive breastfeeding rates were high among this cohort of children. A decrease in EBF was noted between two and four months. EBF up to six months does not cause growth failure. Mothers starting to work and concerns regarding adequacy of breast milk were the major reasons to cease EBF. The actual exclusive breastfeeding rates up to six months was 65.9%.

  19. Drug Loading of Mesoporous Silicon

    Science.gov (United States)

    Moffitt, Anne; Coffer, Jeff; Wang, Mengjia

    2011-03-01

    The nanostructuring of crystalline solids with low aqueous solubilities by their incorporation into mesoporous host materials is one route to improve the bioavailability of such solids. Earlier studies suggest that mesoporous Si (PSi), with pore widths in the range of 5-50 nm, is a candidate for such an approach. In this presentation, we describe efforts to load curcumin into free-standing microparticles of PSi. Curcumin is a compound extracted from turmeric root, which is an ingredient of curry. Curucmin has shown activity against selected cancer cell lines, bacteria, and other medical conditions. However, curcumin has a very low bioavailability due to its extremely low water solubility (0.6 μ g/mL). Incorporation of curcumin was achieved by straightforward loading of the molten solid at 185circ; C. Loading experiments were performed using PSi particles of two different size ranges, 45-75 μ m and 150-250 μ m. Longer loading times and ratio of curcumin to PSi leads to a higher percentage of loaded curcumin in both PSi particle sizes (as determined by weight difference). The extent of curcumin crystallinity was assessed by x-ray diffraction (XRD). The solubility and release kinetics of loaded curcumin from the PSi was determined by extraction into water at 37circ; C, with analysis using UV-VIS spectrometry. NSF-REU and TCU.

  20. Incidence and Determinants of Health Care-Associated Blood Stream Infection at a Neonatal Intensive Care Unit in Ujjain, India: A Prospective Cohort Study

    Directory of Open Access Journals (Sweden)

    Mamta Dhaneria

    2018-01-01

    Full Text Available Very little is known about laboratory-confirmed blood stream infections (LCBIs in neonatal intensive care units (NICUs in resource-limited settings. The aim of this cohort study was to determine the incidence, risk factors, and causative agents of LCBIs in a level-2 NICU in India. The diagnosis of LCBIs was established using the Centre for Disease Control, USA criteria. A predesigned questionnaire containing risk factors associated with LCBIs was filled-in. A total of 150 neonates (43% preterm were included in the study. The overall incidence of LCBIs was 31%. The independent risk factors for LCBIs were: preterm neonates (relative risk (RR 2.23, duration of NICU stay more than 14 days (RR 1.75, chorioamnionitis in the mother (RR 3.18, premature rupture of membrane in mothers (RR 2.32, neonate born through meconium-stained amniotic fluid (RR 2.32, malpresentation (RR 3.05, endotracheal intubation (RR 3.41, umbilical catheterization (RR 4.18, and ventilator-associated pneumonia (RR 3.17. The initiation of minimal enteral nutrition was protective from LCBIs (RR 0.22. The predominant causative organisms were gram-negative pathogens (58%. The results of the present study can be used to design and implement antibiotic stewardship policy and introduce interventions to reduce LCBIs in resource-limited settings.

  1. Load research manual. Volume 2. Fundamentals of implementing load research procedures

    Energy Technology Data Exchange (ETDEWEB)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. In Volumes 1 and 2, procedures are suggested for determining data requirements for load research, establishing the size and customer composition of a load survey sample, selecting and using equipment to record customer electricity usage, processing data tapes from the recording equipment, and analyzing the data. Statistical techniques used in customer sampling are discussed in detail. The costs of load research also are estimated, and ongoing load research programs at three utilities are described. The manual includes guides to load research literature and glossaries of load research and statistical terms.

  2. Determination of the time to failure curve as a function of stress for a highly irradiated AISI 304 stainless steel after constant load tests in simulated PWR water environment

    International Nuclear Information System (INIS)

    Pokor, C.; Massoud, J.P.; Wintergerst, M.; Toivonen, A.; Ehrnsten, U.; Karlsen, W.

    2011-01-01

    The structures of Reactor Pressure Vessel Internals are subjected to an intense neutron flux. Under these operating conditions, the microstructure and the mechanical properties of the austenitic stainless steel components change. In addition, these components are subjected to stress of either manufacturing origin or generated under operation. Cases of baffle bolts cracking have occurred in CP0 Nuclear Power Plant units. The mechanism of degradation of these bolts is Irradiation-Assisted Stress Corrosion Cracking. In order to obtain a better understanding of this mechanism and its principal parameters of influence, a set of stress corrosion tests (mainly constant load tests) were launched within the framework of the EDF project 'PWR Internals' using materials from a Chooz A baffle corner (SA 304). These tests aim to quantify the influence on IASCC of the applied stress, temperature and environment (primary water, higher lithium concentration, inert environment) for an irradiation dose close to 30 dpa. A curve showing time to failure as a function of the stress was determined. The shape of this curve is consistent with the few data that are available in the literature. A stress threshold of about 50 % of the yield strength value at the test temperature has been determined, below which cracking in that environment seems impossible. After irradiation this material is sensitive to intergranular fracture in a primary environment, but also in an inert environment (argon) at 340 C. The tests also showed a negative effect of increased lithium concentration on the time to failure and on the stress threshold. (authors)

  3. Shot loading platform analysis

    International Nuclear Information System (INIS)

    Norman, B.F.

    1994-01-01

    This document provides the wind/seismic analysis and evaluation for the shot loading platform. Hand calculations were used for the analysis. AISC and UBC load factors were used in this evaluation. The results show that the actual loads are under the allowable loads and all requirements are met

  4. Determination of the load factor of an industrial installation: application to the Silva process; Determination du taux de charge d'une installation industrielle: application au procede Silva

    Energy Technology Data Exchange (ETDEWEB)

    Le Guyadec, E. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/SLC), 26 - Pierrelatte (France); Levoy, R. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/SIM), 26 - Pierrelatte (France); Michel, N. [CEA Vallee du Rhone, Dept. de Technologie de l' Enrichissement (DCC/DTE/STS), 26 - Pierrelatte (France); Radwan, J. [CEA Saclay, Dept. des Procedes d' Enrichissement (DCC/DPE/SPTE), 91 - Gif-sur-Yvette (France); Valadier, L. [CEA Saclay, Dept. des Procedes d' Enrichissement (DCC/DPE/SPTE), 91 - Gif-sur-Yvette (France)

    2000-07-01

    In the present development phase of the SILVA process, the CEA has to calculate the availability of the future SILVA plant. Its production capacity will greatly depend on the reliability of its components. Specific software has been developed to calculate this, basically divided into three parts Database (CRESUS) on the reliability and maintainability of the components gathered into functional groups. Database (REMUS) on continuous degradation laws for their performance. Code (OCTOPUS) on production capacity, containing three models - model of the architecture of the laser, separator and shuttle apparatus. - numerical code to calculate production from the states of the equipment. - model for maintenance scenarios. A complete set of data is processed concerning the failure or survival of actually tested components, or the scaling-up models proposed by the experts. The availability of the future SILVA plant is finally obtained with its production rate and its optimum maintenance policy, comprising curative and preventive maintenance. The entire data chain is organized to be structured, traceable and shared by all the players. At present, data from 15 experimental installations, 50 types of equipment and 221 components are taken into account for compilation of the CRESUS database. Information such as test characteristics, description of events (i.e. preventive component exchange or type of failure, etc.) and description of the version of the components under test, are furnished by the experimenters in user-friendly forms developed with 'Access' software. These data are used to calculate the component failure laws through the history of each. This is followed by the determination of the reliability law parameters and confidence limits for the functional groups, for example the beta and eta parameters of the universal statistical Weibull distribution for the failure rate determined by a maximum likelihood method. This provides information such as Mean Time

  5. Social and clinical determinants of preferences and their achievement at the end of life: prospective cohort study of older adults receiving palliative care in three countries

    Directory of Open Access Journals (Sweden)

    Irene J. Higginson

    2017-11-01

    Full Text Available Abstract Background Achieving choice is proposed as a quality marker. But little is known about what influences preferences especially among older adults. We aimed to determine and compare, across three countries, factors associated with preferences for place of death and treatment, and actual site of death. Methods We recruited adults aged ≥65-years from hospital-based multiprofessional palliative care services in London, Dublin, New York, and followed them for >17 months. All services offered consultation on hospital wards, support for existing clinical teams, outpatient services and received funding from their National Health Service and/or relevant Insurance reimbursements. The New York service additionally had 10 inpatient beds. All worked with and referred patients to local hospices. Face-to-face interviews recorded most and least preferred place of death, treatment goal priorities, demographic and clinical information using validated questionnaires. Multivariable and multilevel analyses assessed associated factors. Results One hundred and thirty eight older adults (64 London, 59 Dublin, 15 New York were recruited, 110 died during follow-up. Home was the most preferred place of death (77/138, 56% followed by inpatient palliative care/hospice units (22%. Hospital was least preferred (35/138, 25%, followed by nursing home (20% and home (16%; hospice/palliative care unit was rarely least preferred (4%. Most respondents prioritised improving quality of life, either alone (54%, or equal with life extension (39%; few (3% chose only life extension. There were no significant differences between countries. Main associates with home preference were: cancer diagnosis (OR 3.72, 95% CI 1.40–9.90 and living with someone (OR 2.19, 1.33–3.62. Adults with non-cancer diagnoses were more likely to prefer palliative care units (OR 2.39, 1.14–5.03. Conversely, functional independence (OR 1.05, 1.04–1.06 and valuing quality of life (OR 3.11, 2.89–3

  6. 14 CFR 31.23 - Flight load factor.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Flight load factor. 31.23 Section 31.23... STANDARDS: MANNED FREE BALLOONS Strength Requirements § 31.23 Flight load factor. In determining limit load, the limit flight load factor must be at least 1.4. ...

  7. Uranium project. Geochemistry prospection

    International Nuclear Information System (INIS)

    Lambert, J.

    1983-01-01

    Geochemistry studies the distribution of the chemicals elements in the terrestrial crust and its ways to migrate. The terminology used in this report is the following one: 1) Principles of the prospection geochemistry 2) Stages of the prospection geochemistry 3)utility of the prospection geochemistry 4) geochemistry of uranium 5) procedures used within the framework of uranium project 6) Average available 7) Selection of the zones of prospection geochemistry 8) Stages of the prospection, Sample preparation and analisis 9) Presentation of the results

  8. Numerical prediction of slamming loads

    DEFF Research Database (Denmark)

    Seng, Sopheak; Jensen, Jørgen J; Pedersen, Preben T

    2012-01-01

    It is important to include the contribution of the slamming-induced response in the structural design of large vessels with a significant bow flare. At the same time it is a challenge to develop rational tools to determine the slamming-induced loads and the prediction of their occurrence. Today i...

  9. Prospective Teachers' Personal Characteristics to Multicultural Education

    Science.gov (United States)

    Eskici, Menekse

    2016-01-01

    The aim of this paper is to determine prospective teachers' personal characteristics to multicultural education. It is also aimed to reveal whether there are meaningful differences in prospective teachers' personal characteristics to multicultural education according to their genders, age and number of siblings. The descriptive model was chosen to…

  10. PROFESSIONAL INSECURITIES OF PROSPECTIVE TEACHERS.

    Science.gov (United States)

    LUECK, WILLIAM R.

    TO DETERMINE WHICH COMMON TEACHING PROBLEMS CAUSE THE GREATEST CONCERN OR INSECURITY AMONG PROSPECTIVE TEACHERS, 445 JUNIORS (243 IN 1962-63 AND 205 IN 1963-64) TAKING A SECONDARY SCHOOL METHODS COURSE WERE ASKED TO RANK TWELVE MAJOR PROBLEMS IN THE ORDER IN WHICH THEY CAUSED CONCERN. THE PROBLEMS WERE COMPILED FROM THOSE OCCURRING FREQUENTLY IN…

  11. On-line separation and preconcentration of lead(II) by solid-phase extraction using activated carbon loaded with xylenol orange and its determination by flame atomic absorption spectrometry.

    Science.gov (United States)

    Ensafi, Ali A; Shiraz, A Zendegi

    2008-02-11

    Activated carbon loaded with xylenol orange in a mini-column was used for the highly selective separation and preconcentration of Pb(II) ions. An on-line system for enrichment and the determination of Pb(II) was carried out on flame atomic absorption spectrometry. The conditions of preconcentration and quantitative recovery of Pb(II) from diluted solution, such as pH of aqueous phase, amount of the sorbent, volume of the solutions and flow variables were studied as well as effect of potential interfering ions. Under the optimum conditions, Pb(II) in an aqueous sample was concentrated about 200-fold and the detection limit was 0.4 ng mL(-1) Pb(II). The adsorption capacity of the solid phase was 0.20mg of lead per one gram of the modified activated carbon. The modified activated carbon is stable for several treatments of sample solutions without the need for using any chemical reagent. The recovery of lead(II) from river water, waste water, tap water, and in the following reference materials: SRM 2711 Montana soil and GBW-07605 tea were obtained in the range of 97-104% by the proposed method.

  12. On-line separation and preconcentration of lead(II) by solid-phase extraction using activated carbon loaded with xylenol orange and its determination by flame atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Ensafi, Ali A.; Shiraz, A. Zendegi

    2008-01-01

    Activated carbon loaded with xylenol orange in a mini-column was used for the highly selective separation and preconcentration of Pb(II) ions. An on-line system for enrichment and the determination of Pb(II) was carried out on flame atomic absorption spectrometry. The conditions of preconcentration and quantitative recovery of Pb(II) from diluted solution, such as pH of aqueous phase, amount of the sorbent, volume of the solutions and flow variables were studied as well as effect of potential interfering ions. Under the optimum conditions, Pb(II) in an aqueous sample was concentrated about 200-fold and the detection limit was 0.4 ng mL -1 Pb(II). The adsorption capacity of the solid phase was 0.20 mg of lead per one gram of the modified activated carbon. The modified activated carbon is stable for several treatments of sample solutions without the need for using any chemical reagent. The recovery of lead(II) from river water, waste water, tap water, and in the following reference materials: SRM 2711 Montana soil and GBW-07605 tea were obtained in the range of 97-104% by the proposed method

  13. On-line separation and preconcentration of lead(II) by solid-phase extraction using activated carbon loaded with xylenol orange and its determination by flame atomic absorption spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Ensafi, Ali A. [College of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)], E-mail: Ensafi@cc.iut.ac.ir; Shiraz, A. Zendegi [College of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2008-02-11

    Activated carbon loaded with xylenol orange in a mini-column was used for the highly selective separation and preconcentration of Pb(II) ions. An on-line system for enrichment and the determination of Pb(II) was carried out on flame atomic absorption spectrometry. The conditions of preconcentration and quantitative recovery of Pb(II) from diluted solution, such as pH of aqueous phase, amount of the sorbent, volume of the solutions and flow variables were studied as well as effect of potential interfering ions. Under the optimum conditions, Pb(II) in an aqueous sample was concentrated about 200-fold and the detection limit was 0.4 ng mL{sup -1} Pb(II). The adsorption capacity of the solid phase was 0.20 mg of lead per one gram of the modified activated carbon. The modified activated carbon is stable for several treatments of sample solutions without the need for using any chemical reagent. The recovery of lead(II) from river water, waste water, tap water, and in the following reference materials: SRM 2711 Montana soil and GBW-07605 tea were obtained in the range of 97-104% by the proposed method.

  14. 1993 Pacific Northwest Loads and Resources Study.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1993-12-01

    The Loads and Resources Study is presented in three documents: (1) this summary of Federal system and Pacific Northwest region loads and resources; (2) a technical appendix detailing forecasted Pacific Northwest economic trends and loads, and (3) a technical appendix detailing the loads and resources for each major Pacific Northwest generating utility. In this loads and resources study, resource availability is compared with a range of forecasted electricity consumption. The forecasted future electricity demands -- firm loads -- are subtracted from the projected capability of existing and {open_quotes}contracted for{close_quotes} resources to determine whether Bonneville Power Administration (BPA) and the region will be surplus or deficit. If resources are greater than loads in any particular year or month, there is a surplus of energy and/or capacity, which BPA can sell to increase revenues. Conversely, if firm loads exceed available resources, there is a deficit of energy and/or capacity, and additional conservation, contract purchases, or generating resources will be needed to meet load growth. The Pacific Northwest Loads and Resources Study analyzes the Pacific Northwest`s projected loads and available generating resources in two parts: (1) the loads and resources of the Federal system, for which BPA is the marketing agency; and (2) the larger Pacific Northwest regional power system, which includes loads and resource in addition to the Federal system. The loads and resources analysis in this study simulates the operation of the power system under the Pacific Northwest Coordination Agreement (PNCA) produced by the Pacific Northwest Coordinating Group. This study presents the Federal system and regional analyses for five load forecasts: high, medium-high, medium, medium-low, and low. This analysis projects the yearly average energy consumption and resource availability for Operating Years (OY) 1994--95 through 2003--04.

  15. Mechanical behavior of ultrafine-grained materials under combined static and dynamic loadings

    Directory of Open Access Journals (Sweden)

    Guo Y.Z.

    2015-01-01

    Full Text Available Ultrafine-grained (UFG materials have extensive prospects for engineering application due to their excellent mechanical properties. However, the grain size decrease reduces their strain hardening ability and makes UFG materials more susceptible to deformation instability such as shear localization. In most cases, critical shear strain is taken as the criterion for formation of shear localization under impact loading or adiabatic shear band (ASB. Recently, some researchers found that the formation of ASB was determined only by the dynamic loading process and had nothing to do with its static loading history. They proposed for coarse-grained metals a dynamic stored energy-based criterion for ASB and verified it by some experiments. In this study, we will focus on the shear localization behavior of UFG metals such as UFG titanium and magnesium alloy AZ31. Quasi-static loading and dynamic loading will be applied on the same specimen alternately. The shear localization behavior will be analyzed and the criterion of its formation will be evaluated.

  16. Effects of Sacubitril/Valsartan in the PARADIGM-HF Trial (Prospective Comparison of ARNI with ACEI to Determine Impact on Global Mortality and Morbidity in Heart Failure) According to Background Therapy.

    Science.gov (United States)

    Okumura, Naoki; Jhund, Pardeep S; Gong, Jianjian; Lefkowitz, Martin P; Rizkala, Adel R; Rouleau, Jean L; Shi, Victor C; Swedberg, Karl; Zile, Michael R; Solomon, Scott D; Packer, Milton; McMurray, John J V

    2016-09-01

    In the PARADIGM-HF trial (Prospective Comparison of ARNI with ACEI to Determine Impact on Global Mortality and Morbidity in Heart Failure), the angiotensin receptor neprilysin inhibitor sacubitril/valsartan was more effective than the angiotensin-converting enzyme inhibitorenalapril in patients with heart failure and reduced ejection fraction. We examined whether this benefit was consistent irrespective of background therapy. We examined the effect of study treatment in the following subgroups: diuretics (yes/no), digitalis glycoside (yes/no), mineralocorticoid receptor antagonist (yes/no),and defibrillating device (implanted defibrillating device, yes/no). We also examined the effect of study drug according to β-blocker dose (≥50% and sacubitril/valsartan versus enalapril hazard ratio for the primary composite end point was 0.80 (95% confidence interval,0.73-0.87;Psacubitril/valsartan was consistent across all subgroups examined. The hazard ratio for primary end point ranged from 0.74 to 0.85 and for cardiovascular death rangedfrom 0.75 to 0.89, with no treatment-by-subgroup interaction. The benefit of sacubitril/valsartan, over an angiotensin-converting enzyme inhibitor, was consistent regardless of background therapy and irrespective of previouscoronary revascularization or β-blocker dose. URL: http://www.clinicaltrials.gov. Unique identifier: NCT01035255. © 2016 American Heart Association, Inc.

  17. Wind Loads on Structures

    DEFF Research Database (Denmark)

    Dyrbye, Claes; Hansen, Svend Ole

    Wind loads have to be taken into account when designing civil engineering structures. The wind load on structures can be systematised by means of the wind load chain: wind climate (global), terrain (wind at low height), aerodynamic response (wind load to pressure), mechanical response (wind...... pressure to structural response) and design criteria. Starting with an introduction of the wind load chain, the book moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. The dynamic wind load covers vibrations...... induced by wind turbulence, vortex shedding, flutter and galloping. The book gives a comprehensive treatment of wind effects on structures and it will be useful for consulting engineers designing wind-sensitive structures. It will also be valuable for students of civil engineering as textbook...

  18. Carbohydrate-Loading Diet

    Science.gov (United States)

    ... Grape juice (12 ounces) 55 225 Lunch Milk, chocolate, reduced fat (12 ounces) 45 285 4 slices ... usual during carbohydrate loading to get the same benefits as a man does. Despite carbohydrate loading, you ...

  19. Autonomous Propellant Loading Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Autonomous Propellant Loading (APL) project consists of three activities. The first is to develop software that will automatically control loading of...

  20. Fuel pellet loading apparatus

    International Nuclear Information System (INIS)

    1980-01-01

    Apparatus is described for loading a predetermined amount of nuclear fuel pellets into nuclear fuel elements and particularly for the automatic loading of fuel pellets from within a sealed compartment. (author)

  1. Limit loads in nozzles

    International Nuclear Information System (INIS)

    Zouain, N.

    1983-01-01

    The static method for the evaluation of the limit loads of a perfectly elasto-plastic structure is presented. Using the static theorem of Limit Analysis and the Finite Element Method, a lower bound for the colapso load can be obtained through a linear programming problem. This formulation if then applied to symmetrically loaded shells of revolution and some numerical results of limit loads in nozzles are also presented. (Author) [pt

  2. Peak load pricing lowers generation costs

    International Nuclear Information System (INIS)

    Lande, R.H.

    1980-01-01

    Before a utility implements peak load pricing for different classes of consumers, the costs and the benefits should be compared. The methodology described enables a utility to determine whether peak load pricing should be introduced for specific users. Cost-benefit analyses for domestic consumers and commercial/industrial consumers, showing break-even points are presented. (author)

  3. Load-Bearing Capacity of Roof Trusses

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Damkilde, Lars; Munch-Andersen, J.

    2004-01-01

    systems such as roof trusses are established and statistical characteristics of the load bearing capacity are determined. The results show that there is a significant increase in the characteristic (nominal) value and a reduction in the coefficient of variation (COV) for typical loads such as permanent...

  4. The prospects for nuclear heating in Hungary

    International Nuclear Information System (INIS)

    Papp, I.; Lynch, G.F.

    1989-09-01

    In assessing alternative nuclear heat sources, a joint study was undertaken between Canada and Hungary to determine the feasibility of using the SLOWPOKE Energy System that has recently been developed. The SLOWPOKE Energy System is a benign nuclear heat source designed to supply 10 thermal megawatts in the form of hot water for local heating systems in buildings and institutions. It uses a combination of inherent safety features, including natural convection circulation and negative reactivity coefficients, and engineered features to ensure an extremely safe system. A SLOWPOKE demonstration heating reactor has been constructed in Canada. The unit started operation in July 1987 and is currently undergoing an extensive test program. Since the nuclear heat source is small, operates at atmospheric pressure, and produces hot water below 100 deg. C, the complex high-pressure, and high-temperature systems essential for electricity production are eliminated. As a result, the nuclear heat source can be located close to the load and will require a minimum of operator attention. In this way, a SLOWPOKE Energy System can be considered much like the oil- or natural gas fired furnace it is designed to replace. The extensive use of hot water district heating systems in Hungary offers the opportunity to exploit such simple nuclear systems as base load heat sources without an extensive retrofit of the existing systems. In addition, the studies have concluded that there are many economically attractive sites for 10 MW SLOWPOKE Energy Systems within the existing networks. The low capital investment requirements, coupled with a high degree of localization, even for the first unit, are seen as additional factors that facilitate the transfer of the technology to Hungary. Simple nuclear heat sources, such as the SLOWPOKE Energy System, when applied to the Hungarian district heating systems, offer the prospects of a significant reduction in the dependence on imported fossil fuels in the

  5. Load Extrapolation During Operation for Wind Turbines

    DEFF Research Database (Denmark)

    Toft, Henrik Stensgaard; Sørensen, John Dalsgaard

    2008-01-01

    In the recent years load extrapolation for wind turbines has been widely considered in the wind turbine industry. Loads on wind turbines during operations are normally dependent on the mean wind speed, the turbulence intensity and the type and settings of the control system. All these parameters...... must be taken into account when characteristic load effects during operation are determined. In the wind turbine standard IEC 61400-1 a method for load extrapolation using the peak over threshold method is recommended. In this paper this method is considered and some of the assumptions are examined...

  6. Friction and anchorage loading revisited.

    Science.gov (United States)

    Dholakia, Kartik D

    2012-01-01

    Contemporary concepts of sliding mechanics explain that friction is inevitable. To overcome this frictional resistance, excess force is required to retract the tooth along the archwire (ie, individual retraction of canines, en masse retraction of anterior teeth), in addition to the amount of force required for tooth movement. The anterior tooth retraction force, in addition to excess force (to overcome friction), produces reciprocal protraction force on molars, thereby leading to increased anchorage loading. However, this traditional concept was challenged in recent literature, which was based on the finite element model, but did not bear correlation to the clinical scenario. This article will reinforce the fact that clinically, friction increases anchorage loading in all three planes of space, considering the fact that tooth movement is a quasistatic process rather than a purely continuous or static one, and that conventional ways of determining the effects of static or dynamic friction on anchorage load cannot be applied to clinical situations (which consist of anatomical resistance units and a complex muscular force system). The article does not aim to quantify friction and its effect on the amount of anchorage load. Rather, a new perspective regarding the role of various additional factors (which is not explained by contemporary concept) that may influence friction and anchorage loading is provided..

  7. Spatial electric load forecasting

    CERN Document Server

    Willis, H Lee

    2002-01-01

    Spatial Electric Load Forecasting Consumer Demand for Power and ReliabilityCoincidence and Load BehaviorLoad Curve and End-Use ModelingWeather and Electric LoadWeather Design Criteria and Forecast NormalizationSpatial Load Growth BehaviorSpatial Forecast Accuracy and Error MeasuresTrending MethodsSimulation Method: Basic ConceptsA Detailed Look at the Simulation MethodBasics of Computerized SimulationAnalytical Building Blocks for Spatial SimulationAdvanced Elements of Computerized SimulationHybrid Trending-Simulation MethodsAdvanced

  8. Cognitive Load and Cooperation

    DEFF Research Database (Denmark)

    Døssing, Felix Sebastian; Piovesan, Marco; Wengström, Erik Roland

    2017-01-01

    We study the effect of intuitive and reflective processes on cooperation using cognitive load. Compared with time constraint, which has been used in the previous literature, cognitive load is a more direct way to block reflective processes, and thus a more suitable way to study the link between...... intuition and cooperation. Using a repeated public goods game, we study the effect of different levels of cognitive load on contributions. We show that a higher cognitive load increases the initial level of cooperation. In particular, subjects are significantly less likely to fully free ride under high...... cognitive load....

  9. Turkish Prospective Teachers' Understanding and Misunderstanding on Global Warming

    Science.gov (United States)

    Ocal, A.; Kisoglu, M.; Alas, A.; Gurbuz, H.

    2011-01-01

    The key objective of this study is to determine the Turkish elementary prospective teachers' opinions on global warming. It is also aimed to establish prospective teachers' views about the environmental education in Turkish universities. A true-false type scale was administered to 564 prospective teachers from science education, social studies…

  10. Application of modified stir bar with nickel:zinc sulphide nanoparticles loaded on activated carbon as a sorbent for preconcentration of losartan and valsartan and their determination by high performance liquid chromatography.

    Science.gov (United States)

    Pebdani, Arezou Amiri; Dadfarnia, Shayesteh; Shabani, Ali Mohammad Haji; Khodadoust, Saeid; Haghgoo, Soheila

    2016-03-11

    In this study, the stir bar was coated for the first time with the ​nicel:zins sulphide nanoparticles (Ni:ZnS NPs) loaded on activated carbon (AC) (Ni:ZnS-AC) as well as 1-ethyl-3-methylimidazolium hexafluorophosphate ionic liquid (IL) using sol gel technique and was used for stir bar sorptive extraction (SBSE) of losartan (LOS) and valsartan (VAL) as the model compounds. The extracted analytes were then quantified by high performance liquid chromatography (HPLC) equipped with an ultra violet detector. The best extraction performance for LOS and VAL was obtained through the optimization of the parameters affecting SBSE including pH of sample solution, ionic strength, extraction time, volume of desorption solvent, desorption time, and stirring speed. The fractional factorial design (FFD) was used to find the most important parameters, which were then optimized by the central composite design (CCD) and the desirability function (DF). Under the optimal experimental conditions, wide linear ranges of 0.4-50μgL(-1) and 0.5-50μgL(-1) and good RSDs (at level of 5μgL(-1) and n=6) of 4.4 and 4.9% were obtained for LOS and VAL, respectively. With the enrichment factors (EFs) of 188.6 and 184.8-fold, the limits of detection (LODs, S/N=3) of the developed method were found to be 0.12 and 0.15μgL(-1) for LOS and VAL, respectively. The developed method was successfully applied to the determination of LOS and VAL in urine and plasma matrices. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Geochemical prospecting in Guiana

    International Nuclear Information System (INIS)

    Coulomb, R.

    1957-01-01

    During the last few years geochemical prospecting techniques have become common usage in the field of mineral deposit prospecting. The real scope of these methods lies in their use in the prospecting of large areas. The most promising use of the geochemistry and hydro-geochemistry of uranium is in heavily forested tropical territories, with few outcrops, where radiometry is strongly handicapped. (author) [fr

  12. Red meat consumption and risk of cardiovascular diseases-is increased iron load a possible link?

    Science.gov (United States)

    Quintana Pacheco, Daniel A; Sookthai, Disorn; Wittenbecher, Clemens; Graf, Mirja E; Schübel, Ruth; Johnson, Theron; Katzke, Verena; Jakszyn, Paula; Kaaks, Rudolf; Kühn, Tilman

    2018-01-01

    High iron load and red meat consumption could increase the risk of cardiovascular diseases (CVDs). As red meat is the main source of heme iron, which is in turn a major determinant of increased iron load, adverse cardiometabolic effects of meat consumption could be mediated by increased iron load. The object of the study was to assess whether associations between red meat consumption and CVD risk are mediated by iron load in a population-based human study. We evaluated relations between red meat consumption, iron load (plasma ferritin), and risk of CVD in the prospective EPIC-Heidelberg Study using a case-cohort sample including a random subcohort (n = 2738) and incident cases of myocardial infarction (MI, n = 555), stroke (n = 513), and CVD mortality (n = 381). Following a 4-step mediation analysis, associations between red meat consumption and iron load, red meat consumption and CVD risk, and iron load and CVD risk were assessed by multivariable regression models before finally testing to which degree associations between red meat consumption and CVD risk were attenuated by adjustment for iron status. Red meat consumption was significantly positively associated with ferritin concentrations and MI risk [HR per 50 g daily intake: 1.18 (95% CI: 1.05, 1.33)], but no significant associations with stroke risk and CVD mortality were observed. While direct associations between ferritin concentrations and MI risk as well as CVD mortality were significant in age- and sex-adjusted Cox regression models, these associations were substantially attenuated and no longer significant after multivariable adjustment for classical CVD risk factors. Strikingly, ferritin concentrations were positively associated with a majority of classical CVD risk factors (age, male sex, alcohol intake, obesity, inflammation, and lower education). Increased ferritin concentrations may be a marker of an overall unfavorable risk factor profile rather than a mediator of greater CVD risk due to meat

  13. Protective containment behaviour under exceeded design loads

    International Nuclear Information System (INIS)

    Holub, I.; Stepan, J.; Maly, J.; Schererova, K.

    2003-01-01

    The contribution describes the calculation results of the behaviour of containment structure if loaded in excess of its design load. The Temelin NPP comprises two WWER 1000 blocks and containment consists of a pre-stressed reinforced concrete structure with a system of unbonded cables. The objective of the calculations was to determine the level of load caused by the internal pressure and temperature at which the containment protective function would fail. In the first step, the maximum overpressure was determined, which may be transferred by the containment structure. In further steps analyses were made of various combinations of simultaneous pressure and temperature loads. The contribution presents relevant calculation results, including the evaluation of containment structure behaviour including liner under loads that exceed its design parameters. (author)

  14. Determination of a cutoff value for pelvic floor distensibility using the Epi-no balloon to predict perineal integrity in vaginal delivery: ROC curve analysis. Prospective observational single cohort study

    Directory of Open Access Journals (Sweden)

    Miriam Raquel Diniz Zanetti

    Full Text Available CONTEXT AND OBJECTIVE: Several risk factors are involved in perineal lacerations during vaginal delivery. However, little is known about the influence of perineal distensibility as a protective factor. The aim here was to determine a cutoff value for pelvic floor distensibility measured using the Epi-no balloon, which could be used as a predictive factor for perineal integrity in vaginal delivery. DESIGN AND SETTING: Prospective observational single cohort study conducted in a maternity hospital. METHODS: A convenience sample of 227 consecutive at-term parturients was used. All women had a single fetus in the vertex presentation, with up to 9.0 cm of dilation. The maximum dilation of the Epi-no balloon was measured using a tape measure after it had been inflated inside the vagina up to the parturients' maximum tolerance. The receiver operating characteristic (ROC curve was used to obtain the Epi-no circumference measurement with best sensitivity and specificity. RESULTS: Among the 161 patients who were included in the study, 50.9% underwent episiotomy, 21.8% presented lacerations and 27.3% retained an intact perineum. Age > 25.9 years; number of pregnancies > 3.4; number of deliveries > 2.2 and circumference measured by Epi-no > 21.4 cm were all directly correlated with an intact perineum. Circumference measurements using the Epi-no balloon that were greater than 20.8 cm showed sensitivity and specificity of 70.5% and 66.7% (area under curve = 0.713, respectively, as a predictive factor for an intact perineum in vaginal delivery. CONCLUSION: Circumferences greater than 20.8 cm achieved using the Epi-no balloon are a predictive factor for perineal integrity in parturients.

  15. Risk Related to Pre-Diabetes Mellitus and Diabetes Mellitus in Heart Failure With Reduced Ejection Fraction: Insights From Prospective Comparison of ARNI With ACEI to Determine Impact on Global Mortality and Morbidity in Heart Failure Trial.

    Science.gov (United States)

    Kristensen, Søren L; Preiss, David; Jhund, Pardeep S; Squire, Iain; Cardoso, José Silva; Merkely, Bela; Martinez, Felipe; Starling, Randall C; Desai, Akshay S; Lefkowitz, Martin P; Rizkala, Adel R; Rouleau, Jean L; Shi, Victor C; Solomon, Scott D; Swedberg, Karl; Zile, Michael R; McMurray, John J V; Packer, Milton

    2016-01-01

    The prevalence of pre-diabetes mellitus and its consequences in patients with heart failure and reduced ejection fraction are not known. We investigated these in the Prospective Comparison of ARNI With ACEI to Determine Impact on Global Mortality and Morbidity in Heart Failure (PARADIGM-HF) trial. We examined clinical outcomes in 8399 patients with heart failure and reduced ejection fraction according to history of diabetes mellitus and glycemic status (baseline hemoglobin A1c [HbA1c]: diabetes mellitus], and ≥ 6.5% [≥ 48 mmol/mol; diabetes mellitus]), in Cox regression models adjusted for known predictors of poor outcome. Patients with a history of diabetes mellitus (n = 2907 [35%]) had a higher risk of the primary composite outcome of heart failure hospitalization or cardiovascular mortality compared with those without a history of diabetes mellitus: adjusted hazard ratio, 1.38; 95% confidence interval, 1.25 to 1.52; P diabetes mellitus and 2103 (25%) had pre-diabetes mellitus. The hazard ratio for patients with undiagnosed diabetes mellitus (HbA1c, > 6.5%) and known diabetes mellitus compared with those with HbA1c diabetes mellitus were also at higher risk (hazard ratio, 1.27 [1.10-1.47]; P diabetes mellitus is associated with a higher risk of adverse cardiovascular outcomes (compared with patients with no diabetes mellitus and HbA1c < 6.0%). LCZ696 was beneficial compared with enalapril, irrespective of glycemic status. URL: http://www.clinicaltrials.gov. Unique identifier: NCT01035255. © 2016 The Authors.

  16. Optimisation of load control

    International Nuclear Information System (INIS)

    Koponen, P.

    1998-01-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  17. Optimisation of load control

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, P [VTT Energy, Espoo (Finland)

    1998-08-01

    Electricity cannot be stored in large quantities. That is why the electricity supply and consumption are always almost equal in large power supply systems. If this balance were disturbed beyond stability, the system or a part of it would collapse until a new stable equilibrium is reached. The balance between supply and consumption is mainly maintained by controlling the power production, but also the electricity consumption or, in other words, the load is controlled. Controlling the load of the power supply system is important, if easily controllable power production capacity is limited. Temporary shortage of capacity causes high peaks in the energy price in the electricity market. Load control either reduces the electricity consumption during peak consumption and peak price or moves electricity consumption to some other time. The project Optimisation of Load Control is a part of the EDISON research program for distribution automation. The following areas were studied: Optimization of space heating and ventilation, when electricity price is time variable, load control model in power purchase optimization, optimization of direct load control sequences, interaction between load control optimization and power purchase optimization, literature on load control, optimization methods and field tests and response models of direct load control and the effects of the electricity market deregulation on load control. An overview of the main results is given in this chapter

  18. 49 CFR 393.108 - How is the working load limit of a tiedown, or the load restraining value of a friction mat...

    Science.gov (United States)

    2010-10-01

    ... load restraining value of a friction mat, determined? 393.108 Section 393.108 Transportation Other... load restraining value of a friction mat, determined? (a) The working load limit (WLL) of a tiedown... load limits. (g) Friction mats which are not marked or rated by the manufacturer shall be considered to...

  19. Uranium prospecting through radon detection; La prospection de l'uranium par le radon

    Energy Technology Data Exchange (ETDEWEB)

    Pradel, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1956-07-01

    Prospecting rests on the determination of the concentration of ground air in radon. Radon diffusing from deep uranium bearing layers is detected in upper ground layers. (author) [French] La prospection est basee sur l'etude de la concentration en radon dans l'air du sol. Dans les terrains superficiels, on decele le radon qui diffuse a partir des couches profondes uraniferes. (auteur)

  20. Status and development of uranium prospection methods

    International Nuclear Information System (INIS)

    Barthel, F.

    1978-01-01

    In radiometric prospection, gamma measuring equipment is widely used. Simple instruments, so-called scintillometers, can only measure total radiation while spectrometers permit separate measurements of uranium, thorium, or calcium via daughter products of their decay chains. Depending on the target investigated, airborne, carborne, or footborne methods are employed. In radon prospection the gaseous decay product radon is measured as a sign of hidden uranium enrichment in ground air or water from springs. Due to its high solubility, uranium is well suited for geochemical prospection where uranium concentrations in bodies of water, river sediments, soil and rock types are determined. There is a trend in uranium prospection towards the discovery of hidden orifications. Novel techniques, e.g. airborne geochemistry, isotope chemistry, tracer element measurement, etc. are being tested with a view to their suitability for uranium prospection. (orig./HP) 891 HP/orig.- 892 MKO [de

  1. Concentrated loads on concrete

    DEFF Research Database (Denmark)

    Lorenzen, Karen Grøndahl; Nielsen, Mogens Peter

    1997-01-01

    This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas are devel......This report deals with concentrated loads on concrete.A new upper bound solution in the axisymmetrical case of a point load in the center of the end face of a cylinder is developed.Based on previous work dealing with failure mechanisms and upper bound solutions, new approximate formulas...

  2. Critical Axial Load

    Directory of Open Access Journals (Sweden)

    Walt Wells

    2008-01-01

    Full Text Available Our objective in this paper is to solve a second order differential equation for a long, simply supported column member subjected to a lateral axial load using Heun's numerical method. We will use the solution to find the critical load at which the column member will fail due to buckling. We will calculate this load using Euler's derived analytical approach for an exact solution, as well as Euler's Numerical Method. We will then compare the three calculated values to see how much they deviate from one another. During the critical load calculation, it will be necessary to calculate the moment of inertia for the column member.

  3. Load regulating expansion fixture

    International Nuclear Information System (INIS)

    Wagner, L.M.; Strum, M.J.

    1998-01-01

    A free standing self contained device for bonding ultra thin metallic films, such as 0.001 inch beryllium foils is disclosed. The device will regulate to a predetermined load for solid state bonding when heated to a bonding temperature. The device includes a load regulating feature, whereby the expansion stresses generated for bonding are regulated and self adjusting. The load regulator comprises a pair of friction isolators with a plurality of annealed copper members located there between. The device, with the load regulator, will adjust to and maintain a stress level needed to successfully and economically complete a leak tight bond without damaging thin foils or other delicate components. 1 fig

  4. Electrical load modeling

    Energy Technology Data Exchange (ETDEWEB)

    Valgas, Helio Moreira; Pinto, Roberto del Giudice R.; Franca, Carlos [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Lambert-Torres, Germano; Silva, Alexandre P. Alves da; Pires, Robson Celso; Costa, Junior, Roberto Affonso [Escola Federal de Engenharia de Itajuba, MG (Brazil)

    1994-12-31

    Accurate dynamic load models allow more precise calculations of power system controls and stability limits, which are critical mainly in the operation planning of power systems. This paper describes the development of a computer program (software) for static and dynamic load model studies using the measurement approach for the CEMIG system. Two dynamic load model structures are developed and tested. A procedure for applying a set of measured data from an on-line transient recording system to develop load models is described. (author) 6 refs., 17 figs.

  5. Attentional sets influence perceptual load effects, but not dilution effects.

    Science.gov (United States)

    Benoni, Hanna; Zivony, Alon; Tsal, Yehoshua

    2014-01-01

    Perceptual load theory [Lavie, N. (1995). Perceptual load as a necessary condition for selective attention. Journal of Experimental Psychology: Human Perception and Performance, 21, 451-468.; Lavie, N., & Tsal, Y. (1994) Perceptual load as a major determinant of the locus of selection in visual attention. Perception & Psychophysics, 56, 183-197.] proposes that interference from distractors can only be avoided in situations of high perceptual load. This theory has been supported by blocked design manipulations separating low load (when the target appears alone) and high load (when the target is embedded among neutral letters). Tsal and Benoni [(2010a). Diluting the burden of load: Perceptual load effects are simply dilution effects. Journal of Experimental Psychology: Human Perception and Performance, 36, 1645-1656.; Benoni, H., & Tsal, Y. (2010). Where have we gone wrong? Perceptual load does not affect selective attention. Vision Research, 50, 1292-1298.] have recently shown that these manipulations confound perceptual load with "dilution" (the mere presence of additional heterogeneous items in high-load situations). Theeuwes, Kramer, and Belopolsky [(2004). Attentional set interacts with perceptual load in visual search. Psychonomic Bulletin & Review, 11, 697-702.] independently questioned load theory by suggesting that attentional sets might also affect distractor interference. When high load and low load were intermixed, and participants could not prepare for the presentation that followed, both the low-load and high-load trials showed distractor interference. This result may also challenge the dilution account, which proposes a stimulus-driven mechanism. In the current study, we presented subjects with both fixed and mixed blocks, including a mix of dilution trials with low-load trials and with high-load trials. We thus separated the effect of dilution from load and tested the influence of attentional sets on each component. The results revealed that whereas

  6. Psychophysiology of prospective memory.

    Science.gov (United States)

    Rothen, Nicolas; Meier, Beat

    2014-01-01

    Prospective memory involves the self-initiated retrieval of an intention upon an appropriate retrieval cue. Cue identification can be considered as an orienting reaction and may thus trigger a psychophysiological response. Here we present two experiments in which skin conductance responses (SCRs) elicited by prospective memory cues were compared to SCRs elicited by aversive stimuli to test whether a single prospective memory cue triggers a similar SCR as an aversive stimulus. In Experiment 2 we also assessed whether cue specificity had a differential influence on prospective memory performance and on SCRs. We found that detecting a single prospective memory cue is as likely to elicit a SCR as an aversive stimulus. Missed prospective memory cues also elicited SCRs. On a behavioural level, specific intentions led to better prospective memory performance. However, on a psychophysiological level specificity had no influence. More generally, the results indicate reliable SCRs for prospective memory cues and point to psychophysiological measures as valuable approach, which offers a new way to study one-off prospective memory tasks. Moreover, the findings are consistent with a theory that posits multiple prospective memory retrieval stages.

  7. Impact of measurement uncertainty from experimental load distribution factors on bridge load rating

    Science.gov (United States)

    Gangone, Michael V.; Whelan, Matthew J.

    2018-03-01

    Load rating and testing of highway bridges is important in determining the capacity of the structure. Experimental load rating utilizes strain transducers placed at critical locations of the superstructure to measure normal strains. These strains are then used in computing diagnostic performance measures (neutral axis of bending, load distribution factor) and ultimately a load rating. However, it has been shown that experimentally obtained strain measurements contain uncertainties associated with the accuracy and precision of the sensor and sensing system. These uncertainties propagate through to the diagnostic indicators that in turn transmit into the load rating calculation. This paper will analyze the effect that measurement uncertainties have on the experimental load rating results of a 3 span multi-girder/stringer steel and concrete bridge. The focus of this paper will be limited to the uncertainty associated with the experimental distribution factor estimate. For the testing discussed, strain readings were gathered at the midspan of each span of both exterior girders and the center girder. Test vehicles of known weight were positioned at specified locations on each span to generate maximum strain response for each of the five girders. The strain uncertainties were used in conjunction with a propagation formula developed by the authors to determine the standard uncertainty in the distribution factor estimates. This distribution factor uncertainty is then introduced into the load rating computation to determine the possible range of the load rating. The results show the importance of understanding measurement uncertainty in experimental load testing.

  8. Proceedings of the 11. Banska Stiavnica Days 2009. Peaceful use of nuclear energy. Application of nuclear technologies and determination of radionuclides in the environment. Environmental load and municipal wastes

    International Nuclear Information System (INIS)

    Seliga, M.; Sebesta, P.

    2009-10-01

    Scientific conference deals with problems in environmental sciences and radio-environmental sciences. The conference proceeded in two sections: (I) Nuclear technologies; (II) Municipal wastes and environmental load. Fifty-seven participants took part in conference. Twenty-eight lectures were presented. Proceedings contain nineteen papers and thirteen presentations, which deal with the scope of INIS..

  9. Proceedings of the 10. Banska Stiavnica Days 2008. Peaceful use of atomic energy. Application of nuclear technologies and determination of radionuclides in the environment. Environmental load and municipal wastes

    International Nuclear Information System (INIS)

    Seliga, M.; Sebesta, P.

    2008-10-01

    Scientific conference deals with problems in environmental sciences and radio-environmental sciences. The conference proceeded in two sections: (I) Nuclear technologies; (II) Municipal wastes and environmental load. Fifty participants took part in conference. Twenty-four lectures and two posters were presented. Proceedings contain twenty-six papers all papers deals with the scope of INIS

  10. Solving unit commitment and economic load dispatch problems ...

    African Journals Online (AJOL)

    Economic Load Dispatch (ELD) and Unit Commitment (UC) are very important applications to predict the optimized cost of load in a power system. UC determines working states for existing generating units under some operational constraints and then optimizing the operation cost for all running units w.r.t. load demand ...

  11. 14 CFR 398.9 - Load factor standards.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Load factor standards. 398.9 Section 398.9... STATEMENTS GUIDELINES FOR INDIVIDUAL DETERMINATIONS OF BASIC ESSENTIAL AIR SERVICE § 398.9 Load factor standards. The load factor standards used in this part may be raised for individual eligible places under...

  12. Processing Capacity under Perceptual and Cognitive Load: A Closer Look at Load Theory

    Science.gov (United States)

    Fitousi, Daniel; Wenger, Michael J.

    2011-01-01

    Variations in perceptual and cognitive demands (load) play a major role in determining the efficiency of selective attention. According to load theory (Lavie, Hirst, Fockert, & Viding, 2004) these factors (a) improve or hamper selectivity by altering the way resources (e.g., processing capacity) are allocated, and (b) tap resources rather than…

  13. Load Balancing in Hypergraphs

    Science.gov (United States)

    Delgosha, Payam; Anantharam, Venkat

    2018-03-01

    Consider a simple locally finite hypergraph on a countable vertex set, where each edge represents one unit of load which should be distributed among the vertices defining the edge. An allocation of load is called balanced if load cannot be moved from a vertex to another that is carrying less load. We analyze the properties of balanced allocations of load. We extend the concept of balancedness from finite hypergraphs to their local weak limits in the sense of Benjamini and Schramm (Electron J Probab 6(23):13, 2001) and Aldous and Steele (in: Probability on discrete structures. Springer, Berlin, pp 1-72, 2004). To do this, we define a notion of unimodularity for hypergraphs which could be considered an extension of unimodularity in graphs. We give a variational formula for the balanced load distribution and, in particular, we characterize it in the special case of unimodular hypergraph Galton-Watson processes. Moreover, we prove the convergence of the maximum load under some conditions. Our work is an extension to hypergraphs of Anantharam and Salez (Ann Appl Probab 26(1):305-327, 2016), which considered load balancing in graphs, and is aimed at more comprehensively resolving conjectures of Hajek (IEEE Trans Inf Theory 36(6):1398-1414, 1990).

  14. Load event: Aircraft crash

    International Nuclear Information System (INIS)

    Fritsch, H.

    1985-01-01

    The bibliography includes 48 quotations, up to the year 1983, on the following issues: Experiments and computational methods. Design load for the dimensioning of reinforced concrete buildings and components with respect to the dynamic load in the event of an aircraft crash. (orig./HP) [de

  15. Using bench press load to predict upper body exercise loads in physically active individuals.

    Science.gov (United States)

    Wong, Del P; Ngo, Kwan-Lung; Tse, Michael A; Smith, Andrew W

    2013-01-01

    This study investigated whether loads for assistance exercises of the upper body can be predicted from the loads of the bench press exercise. Twenty-nine physically active collegiate students (age: 22.6 ± 2.5; weight training experience: 2.9 ± 2.1 years; estimated 1RM bench press: 54.31 ± 14.60 kg; 1RM: body weight ratio: 0.80 ± 0.22; BMI: 22.7 ± 2.1 kg·m(-2)) were recruited. The 6RM loads for bench press, barbell bicep curl, overhead dumbbell triceps extension, hammer curl and dumbbell shoulder press were measured. Test-retest reliability for the 5 exercises as determined by Pearson product moment correlation coefficient was very high to nearly perfect (0.82-0.98, p bench press load was significantly correlated with the loads of the 4 assistance exercises (r ranged from 0.80 to 0.93, p bench press load was a significant (R(2) range from 0.64 to 0.86, p Bench press load (0.28) + 6.30 kg, (b) Barbell biceps curl = Bench press load (0.33) + 6.20 kg, (c) Overhead triceps extension = Bench press load (0.33) - 0.60 kg, and (d) Dumbbell shoulder press = Bench press load (0.42) + 5.84 kg. The difference between the actual load and the predicted load using the four equations ranged between 6.52% and 8.54%, such difference was not significant. Fitness professionals can use the 6RM bench press load as a time effective and accurate method to predict training loads for upper body assistance exercises. Key pointsThe bench press load was significantly correlated with the loads of the 4 assistance exercises.No significant differences were found between the actual load and the predicted load in the four equations.6RM bench press load can be a time effective and accurate method to predict training loads for upper body assistance exercises.

  16. A prospective randomised controlled trial to determine the early and late reactions after the use of iopamidol 340 (NiopamTM) and iomeprol 350 (Iomeron[reg]) in cardiac catheterisation

    International Nuclear Information System (INIS)

    Vijayalakshmi, Kunadian; Kunadian, Babu; Wright, Robert A.; Hall, James A.; Stewart, Michael J.; Davies, Adrian; Sutton, Andrew; Belder, Mark A. de

    2007-01-01

    A new generation of intravascular contrast agents, the non-ionic monomers have safety profiles that are superior to those of older ionic compounds. There are, however, significant differences between these agents. Aim: The aim of this study was to determine the incidence of early ( 24 h to 7 days) reactions to two non-ionic contrast agents currently used during cardiac catheterisation: iopamidol 340 (Niopam TM Bracco UK Ltd.) and iomeprol 350 (Iomeron[reg] Bracco UK Ltd.). Methods: This was a prospective, randomised, double blinded trial. One thousand nine hundred and eighty-five patients undergoing cardiac catheterisation received one of the following contrast agents on a weekly basis: iopamidol 340 (Niopam TM ) and iomeprol 350 (Iomeron[reg]). Reactions that were possibly related to the contrast agents were recorded on predefined data collection forms during the first 24 h of the procedure (early reaction) and after 24 h to 7 days (late reaction) by means of a questionnaire. Results: The baseline characteristics were matched in both the groups. There was no significant difference in the incidence of heat sensation experienced between the two groups (p = 0.1). Early non-heat reactions occurred in 2.7% of patients receiving iopamidol 340 (Niopam TM ) and 4% of those receiving iomeprol 350 (Iomeron[reg]) (p = 0.1). Significant electrocardiographic changes were recorded in 1.7% of patients who received iopamidol 340 (Niopam TM ), and 1% of those who received iomeprol 350 (Iomeron[reg]) (p = 0.2). Bradycardia occurred more frequently in the iopamidol 350 group (0.8%) compared to the iomeprol 350 group (0.1%) p = 0.02. Late reactions occurred in 16.2% of those receiving iopamidol 340 (Niopam TM ) and 21.7% of those receiving iomeprol 350 (Iomeron[reg] (p = 0.02). A total of 23 (3.7%) patients in the iopamidol group and 39 (6.2%) patients in the iomeprol group reported nausea, p = 0.01. Conclusions: The incidence of early adverse reactions was similar with the two non

  17. Collectively loading programs in a multiple program multiple data environment

    Science.gov (United States)

    Aho, Michael E.; Attinella, John E.; Gooding, Thomas M.; Gooding, Thomas M.; Miller, Samuel J.

    2016-11-08

    Techniques are disclosed for loading programs efficiently in a parallel computing system. In one embodiment, nodes of the parallel computing system receive a load description file which indicates, for each program of a multiple program multiple data (MPMD) job, nodes which are to load the program. The nodes determine, using collective operations, a total number of programs to load and a number of programs to load in parallel. The nodes further generate a class route for each program to be loaded in parallel, where the class route generated for a particular program includes only those nodes on which the program needs to be loaded. For each class route, a node is selected using a collective operation to be a load leader which accesses a file system to load the program associated with a class route and broadcasts the program via the class route to other nodes which require the program.

  18. Effect of density and weight of load on the energy cost of carrying loads by donkeys and ponies.

    Science.gov (United States)

    Pearson, R A; Dijkman, J T; Krecek, R C; Wright, P

    1998-02-01

    Two experiments were designed to compare the energy used in carrying loads by donkeys and ponies. In the first experiment 3 donkeys and 3 ponies were compared on treadmills in the UK. Density of load (lead shot or straw) had no significant effect on the energy cost of carrying loads; however, the energy cost of carrying a load decreased significantly (p < 0.001) as the weight of the load increased (in donkeys 6.44, 4.35 and 3.03 J/kg load/m, in ponies 5.82, 3.75 and 3.68 J/kg load/m, for loads of 13, 20 and 27 kg/100 kg liveweight (M) respectively). Differences between species were not significant. In the second experiment energy expenditures were determined in 3 donkeys carrying loads equivalent to 40 kg/100 kg M over gently undulating gravel tracks in Tunisia. Energy costs of carrying the load were 2.34 (SE 0.07) J/kg load/m. The results of both experiments showed that provided the load is balanced, density does not significantly affect the energy cost of carrying; however, as the load increased then the unit energy cost of carrying it decreased. This suggest that it is more efficient in terms of energy used to carry loads equivalent to 27 to 40 kg/100 kg M than it is to carry lighter loads to less than 20 kg/100 kg M.

  19. Procedures for Calculating Residential Dehumidification Loads

    Energy Technology Data Exchange (ETDEWEB)

    Winkler, Jon [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    Residential building codes and voluntary labeling programs are continually increasing the energy efficiency requirements of residential buildings. Improving a building's thermal enclosure and installing energy-efficient appliances and lighting can result in significant reductions in sensible cooling loads leading to smaller air conditioners and shorter cooling seasons. However due to fresh air ventilation requirements and internal gains, latent cooling loads are not reduced by the same proportion. Thus, it's becoming more challenging for conventional cooling equipment to control indoor humidity at part-load cooling conditions and using conventional cooling equipment in a non-conventional building poses the potential risk of high indoor humidity. The objective of this project was to investigate the impact the chosen design condition has on the calculated part-load cooling moisture load, and compare calculated moisture loads and the required dehumidification capacity to whole-building simulations. Procedures for sizing whole-house supplemental dehumidification equipment have yet to be formalized; however minor modifications to current Air-Conditioner Contractors of America (ACCA) Manual J load calculation procedures are appropriate for calculating residential part-load cooling moisture loads. Though ASHRAE 1% DP design conditions are commonly used to determine the dehumidification requirements for commercial buildings, an appropriate DP design condition for residential buildings has not been investigated. Two methods for sizing supplemental dehumidification equipment were developed and tested. The first method closely followed Manual J cooling load calculations; whereas the second method made more conservative assumptions impacting both sensible and latent loads.

  20. Critical traffic loading for the design of prestressed concrete bridge

    International Nuclear Information System (INIS)

    Hassan, M.I.U.

    2009-01-01

    A study has been carried out to determine critical traffic loadings for the design of bridge superstructures. The prestressed concrete girder bridge already constructed in Lahore is selected for the analysis as an example. Standard traffic loadings according to AASHTO (American Association of State Highway and Transportation Officials) and Pakistan Highway Standards are used for this purpose. These include (1) HL-93 Truck, (2) Lane and (3) Tandem Loadings in addition to (4) Military tank loading, (5) Class-A, (6) Class-B and (7) Class-AA loading, (8) NLC (National Logistic Cell) and (9) Volvo truck loadings. Bridge superstructure including transom beam is analyzed Using ASD and LRFD (Load and Resistance Factor Design) provisions of AASHTO specifications. For the analysis, two longer and shorter spans are selected. This includes the analysis of bridge deck; interior and exterior girder; a typical transom beam and a pier. Dead and live loading determination is carried out using both computer aided and manual calculations. Evaluation of traffic loadings is done for all the bridge components to find out the critical loading. HL-93 loading comes out to be the most critical loading and where this loading is not critical in case of bridge decks; a factor of 1.15 is introduced to make it equivalent with HL-93 -Ioading. SAP-2000 (Structural Engineering Services of Pakistan) and MS-Excel is employed for analysis of bridge superstructure subjected to this loading. Internal forces are obtained for the structural elements of the bridge for all traffic loadings mentioned. It is concluded that HL-93 loading can be used for the design of prestressed concrete girder bridge. Bridge design authorities like NHA (National Highway Authority) and different cities development authorities are using different standard traffic loadings. A number of suggestions are made from the results of the research work related to traffic loadings and method of design. These recommendations may be

  1. Phosphorous loads evaluation from soil

    International Nuclear Information System (INIS)

    Mezzanotte, V.

    1996-01-01

    With reference to the well known difficulty of quantifying non point phosphorous loads, as well as to their growing relative importance where point source leads decrease, a literature review has been carried out concerning soil export coefficients. On such basis, the values which seem to be the most appropriate for Italy have been estimated for different land use categories. The main mechanisms determining non point phosphorous load generation and the factors affecting their importance are also described. In the end, criteria for estimating the importance of non point sources in a basin are suggested to be used for deciding whether a traditional, parametric assessment (inevitably involving a certain error) can be acceptable or experimental measures are needed

  2. Load Flow and Short Circuit Analysis of the Class III Power System of HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H. K.; Jung, H. S

    2005-12-15

    The planning, design, and operation of electric power system require engineering studies to assist in the evaluation of the system performance, reliability, safety and economics. The Class III power of HANARO supplies power for not only HANARO but also RIPF and IMEF. The starting current of most ac motors is five to ten times normal full load current. The loads of the Class III power are connected in consecutive orders at an interval for 10 seconds to avoid excessive voltage drop. This technical report deals with the load flow study and motor starting study for the Class III power of HANARO using ETAP(Electrical Transient Analyzer Program) to verify the capacity of the diesel generator. Short-circuit studies are done to determine the magnitude of the prospective currents flowing throughout the power system at various time intervals after a fault occurs. Short-circuit studies can be performed at the planning stage in order to help finalize the system layout, determine voltage levels, and size cables, transformers, and conductors. From this study, we verify the short circuit current capacity of air circuit breaker(ACB) and automatic transfer switch(ATS) of the Class III power.

  3. Macrophyte Community Response to Nitrogen Loading and ...

    Science.gov (United States)

    Empirical determination of nutrient loading thresholds that negatively impact seagrass communities have been elusive due to the multitude of factors involved. Using a mesocosm system that simulated Pacific Northwest estuaries, we evaluated macrophyte metrics across gradients of NO3 loading (0, 1.5, 3 and 6x ambient) and temperature (10 and 20 °C). Macroalgal growth, biomass, and C:N responded positively to increased NO3 load and floating algal mats developed at 20 ºC. Zostera japonica metrics, including C:N, responded more to temperature than to NO3 loading. Z. marina biomass exhibited a negative temperature effect and in some cases a negative NO3 effect, while growth rate increased with temperature. Shoot survival decreased at 20 ºC but was not influenced by NO3 loading. Wasting disease index exhibited a significant temperature by NO3 interaction consistent with increased disease susceptibility. Community shifts observed were consistent with the nutrient loading hypothesis at 20 ºC, but there was no evidence of other eutrophication symptoms due to the short residence time. The Nutrient Pollution Index tracked the NO3 gradient at 10 ºC but exhibited no response at 20 ºC. We suggest that systems characterized by cool temperatures, high NO3 loads, and short residence time may be resilient to many symptoms of eutrophication. Estuarine systems characterized by cool temperatures, high nutrient loads and rapid flushing may be resilient to some symptoms

  4. Load Balancing Scientific Applications

    Energy Technology Data Exchange (ETDEWEB)

    Pearce, Olga Tkachyshyn [Texas A & M Univ., College Station, TX (United States)

    2014-12-01

    The largest supercomputers have millions of independent processors, and concurrency levels are rapidly increasing. For ideal efficiency, developers of the simulations that run on these machines must ensure that computational work is evenly balanced among processors. Assigning work evenly is challenging because many large modern parallel codes simulate behavior of physical systems that evolve over time, and their workloads change over time. Furthermore, the cost of imbalanced load increases with scale because most large-scale scientific simulations today use a Single Program Multiple Data (SPMD) parallel programming model, and an increasing number of processors will wait for the slowest one at the synchronization points. To address load imbalance, many large-scale parallel applications use dynamic load balance algorithms to redistribute work evenly. The research objective of this dissertation is to develop methods to decide when and how to load balance the application, and to balance it effectively and affordably. We measure and evaluate the computational load of the application, and develop strategies to decide when and how to correct the imbalance. Depending on the simulation, a fast, local load balance algorithm may be suitable, or a more sophisticated and expensive algorithm may be required. We developed a model for comparison of load balance algorithms for a specific state of the simulation that enables the selection of a balancing algorithm that will minimize overall runtime.

  5. Crack modelling for the assessment of stiffness loss of reinforced concrete structures under mechanical loading - determination of the permeability of the micro-cracked body; Modelisation de la fissuration pour l'evaluation de la perte d'etancheite des structures en beton arme sous chargements mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    Bongue Boma, M

    2007-12-15

    We propose a model describing the evolution of mechanical and permeability properties of concrete under slow mechanical loading. Calling upon the theory of continua with microstructure, the kinematic of the domain is enriched by a variable characterising size and orientation of the crack field. We call upon configurational forces to deal with crack propagation and we determine the balance equations governing both strain and propagation. The geometry of the microstructure is representative of the porous media: the permeability is obtained from the resolution of Stokes equations in an elementary volume. An example has been treated: we considered simple assumptions (uniform crack field, application of linear fracture mechanics...) and we determined the behaviour of a body under tensile loading. Strain, crack propagation and stiffness loss are completely assessed. Finally the evolution of permeability is plotted: once activated, crack propagation is the main cause of water tightness loss. (author)

  6. Crack modelling for the assessment of stiffness loss of reinforced concrete structures under mechanical loading - determination of the permeability of the micro-cracked body; Modelisation de la fissuration pour l'evaluation de la perte d'etancheite des structures en beton arme sous chargements mecaniques

    Energy Technology Data Exchange (ETDEWEB)

    Bongue Boma, M

    2007-12-15

    We propose a model describing the evolution of mechanical and permeability properties of concrete under slow mechanical loading. Calling upon the theory of continua with microstructure, the kinematic of the domain is enriched by a variable characterising size and orientation of the crack field. We call upon configurational forces to deal with crack propagation and we determine the balance equations governing both strain and propagation. The geometry of the microstructure is representative of the porous media: the permeability is obtained from the resolution of Stokes equations in an elementary volume. An example has been treated: we considered simple assumptions (uniform crack field, application of linear fracture mechanics...) and we determined the behaviour of a body under tensile loading. Strain, crack propagation and stiffness loss are completely assessed. Finally the evolution of permeability is plotted: once activated, crack propagation is the main cause of water tightness loss. (author)

  7. Emission factors and chemical characterisation of fine particulate emissions from modern and old residential biomass heating systems determined for typical load cycles; Emissionsfaktoren und chemische Charakterisierung von Feinstaubemissionen moderner und alter Biomasse-Kleinfeuerungen ueber typische Tageslastverlaeufe

    Energy Technology Data Exchange (ETDEWEB)

    Kelz, Joachim [BIOENERGY 2020+ GmbH, Graz (Austria); Brunner, Thomas; Obernberger, Ingwald [BIOENERGY 2020+ GmbH, Graz (Austria); Technische Universitaet Graz, Institut fuer Prozess- und Partikeltechnik, Graz (Austria); BIOS BIOENERGIESYSTEME GmbH, Graz (Austria)

    2012-12-15

    It is already well known that there are significant differences regarding the emissions, especially particulate matter (PM) emissions, of old and modern as well as automatically and not automatically controlled biomass based residential heating systems. This concerns their magnitude as well as their chemical composition. In order to investigate emission factors for particulate emissions and the chemical compositions of the PM emissions over typical whole day operation cycles, a project on the determination and characterisation of PM emissions from the most relevant small-scale biomass combustion systems was performed at the BIOENERGY 2020+ GmbH, Graz, Austria, in cooperation with the Institute for Process and Particle Engineering, Graz University of Technology. The project was based on test stand measurements, during which relevant operation parameters (gaseous emissions, boiler load, flue gas temperature, combustion chamber temperature etc.) as well as PM emissions have been measured and PM samples have been taken and forwarded to chemical analyses. Firstly, typical whole day operation cycles for residential biomass combustion systems were specified for the test runs. Thereby automatically fed and automatically controlled boilers, manually fed and automatically controlled boilers as well as manually fed stoves were distinguished. The results show a clear correlation between the gaseous emissions (CO and OGC) and the PM{sub 1} emissions. It is indicated that modern biomass combustion systems emit significantly less gaseous and PM emissions than older technologies (up to a factor of 100). Moreover, automatically fed systems emit much less gaseous and PM emissions than manually fed batch-combustion systems. PM emissions from modern and automatically controlled systems mainly consist of alkaline metal salts, while organic aerosols and soot dominate the composition of aerosols from old and not automatically controlled systems. As an important result comprehensive data

  8. CANDU market prospects

    International Nuclear Information System (INIS)

    Kakaria, B.K.

    1994-01-01

    This 1994 survey of prospective markets for CANDU reactors discusses prospects in Turkey, Thailand, the Philippines, Korea, Indonesia, China and Egypt, and other opportunities, such as in fuel cycles and nuclear safety. It was concluded that foreign partners would be needed to help with financing

  9. Sharpening Intertemporal Prospect Theory

    OpenAIRE

    Pushpa, Rathie; Carlos, Radavelli; Sergio, Da Silva

    2006-01-01

    Prospect theory [4] of risky choices has been extended to encompass intertemporal choices [6]. Presentation of intertemporal prospect theory suffers from minor mistakes, however [2]. To clarify the theory we restate it and show further mistakes in current presentations ([6], [2]) of value and discount functions.

  10. Perceptual Load Affects Eyewitness Accuracy & Susceptibility to Leading Questions

    Directory of Open Access Journals (Sweden)

    Gillian Murphy

    2016-08-01

    Full Text Available Load Theory (Lavie, 1995; 2005 states that the level of perceptual load in a task (i.e. the amount of information involved in processing task-relevant stimuli determines the efficiency of selective attention. There is evidence that perceptual load affects distractor processing, with increased inattentional blindness under high load. Given that high load can result in individuals failing to report seeing obvious objects, it is conceivable that load may also impair memory for the scene. The current study is the first to assess the effect of perceptual load on eyewitness memory. Across three experiments (two video-based and one in a driving simulator, the effect of perceptual load on eyewitness memory was assessed. The results showed that eyewitnesses were less accurate under high load, in particular for peripheral details. For example, memory for the central character in the video was not affected by load but memory for a witness who passed by the window at the edge of the scene was significantly worse under high load. High load memories were also more open to suggestion, showing increased susceptibility to leading questions. High visual perceptual load also affected recall for auditory information, illustrating a possible cross-modal perceptual load effect on memory accuracy. These results have implications for eyewitness memory researchers and forensic professionals.

  11. Perceptual Load Affects Eyewitness Accuracy and Susceptibility to Leading Questions.

    Science.gov (United States)

    Murphy, Gillian; Greene, Ciara M

    2016-01-01

    Load Theory (Lavie, 1995, 2005) states that the level of perceptual load in a task (i.e., the amount of information involved in processing task-relevant stimuli) determines the efficiency of selective attention. There is evidence that perceptual load affects distractor processing, with increased inattentional blindness under high load. Given that high load can result in individuals failing to report seeing obvious objects, it is conceivable that load may also impair memory for the scene. The current study is the first to assess the effect of perceptual load on eyewitness memory. Across three experiments (two video-based and one in a driving simulator), the effect of perceptual load on eyewitness memory was assessed. The results showed that eyewitnesses were less accurate under high load, in particular for peripheral details. For example, memory for the central character in the video was not affected by load but memory for a witness who passed by the window at the edge of the scene was significantly worse under high load. High load memories were also more open to suggestion, showing increased susceptibility to leading questions. High visual perceptual load also affected recall for auditory information, illustrating a possible cross-modal perceptual load effect on memory accuracy. These results have implications for eyewitness memory researchers and forensic professionals.

  12. Loads of Sewer Manholes within Mining Area

    Directory of Open Access Journals (Sweden)

    Magdalena Zięba

    2014-01-01

    Originality/Value: The presented method is an original concept. It enables the determination of additional external horizontal loads acting on sewer manholes within mining areas, in particular the flexible manholes made of thermoplastics. It also enables the determination of dependencies of changes in the cross-sections of risers of flexible sewer manholes (with different circumferential stiffness on the horizontal soil strains.

  13. Work Stress, Caregiving, and Allostatic Load

    DEFF Research Database (Denmark)

    Dich, Nadya; Lange, Theis; Head, Jenny

    2015-01-01

    OBJECTIVES: Studies investigating health effects of work and family stress usually consider these factors in isolation. The present study investigated prospective interactive effects of job strain and informal caregiving on allostatic load (AL), a multisystem indicator of physiological......). Regardless of job strain, participants with low caregiving burden (below sample median) had lower subsequent AL levels than did non-caregivers (b = -0.22, 95% confidence interval = -0.06--0.37). CONCLUSIONS: The study provides some evidence for adverse effects of stress at work combined with family demands...

  14. Lumbriculus variegatus loading study

    Data.gov (United States)

    U.S. Environmental Protection Agency — Results from sediment bioaccumulation tests with Lumbriculus variegatus with evaluating the effects of organism loading density. This dataset is associated with the...

  15. LOADING SIMULATION PROGRAM C

    Science.gov (United States)

    LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for simulating hydrology, sediment, and general water quality

  16. LOADING SIMULATION PROGRAM C

    Data.gov (United States)

    U.S. Environmental Protection Agency — LSPC is the Loading Simulation Program in C++, a watershed modeling system that includes streamlined Hydrologic Simulation Program Fortran (HSPF) algorithms for...

  17. Cognitive load theory

    NARCIS (Netherlands)

    Kirschner, Paul A.; Kirschner, Femke; Paas, Fred

    2010-01-01

    Kirschner, P. A., Kirschner, F. C., & Paas, F. (2009). Cognitive load theory. In E. M. Anderman & L. H. Anderman (Eds.). Psychology of classroom learning: An encyclopedia, Volume 1, a-j (pp. 205-209). Detroit, MI: Macmillan Reference.

  18. Static Loads Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides the capability to perform large-scale structural loads testing on spacecraft and other structures. Results from these tests can be used to verify...

  19. Load proportional safety brake

    Science.gov (United States)

    Cacciola, M. J.

    1979-01-01

    This brake is a self-energizing mechanical friction brake and is intended for use in a rotary drive system. It incorporates a torque sensor which cuts power to the power unit on any overload condition. The brake is capable of driving against an opposing load or driving, paying-out, an aiding load in either direction of rotation. The brake also acts as a no-back device when torque is applied to the output shaft. The advantages of using this type of device are: (1) low frictional drag when driving; (2) smooth paying-out of an aiding load with no runaway danger; (3) energy absorption proportional to load; (4) no-back activates within a few degrees of output shaft rotation and resets automatically; and (5) built-in overload protection.

  20. Plug Load Data

    Data.gov (United States)

    National Aeronautics and Space Administration — We provide MATLAB binary files (.mat) and comma separated values files of data collected from a pilot study of a plug load management system that allows for the...

  1. Rating curve estimation of nutrient loads in Iowa rivers

    Science.gov (United States)

    Stenback, G.A.; Crumpton, W.G.; Schilling, K.E.; Helmers, M.J.

    2011-01-01

    Accurate estimation of nutrient loads in rivers and streams is critical for many applications including determination of sources of nutrient loads in watersheds, evaluating long-term trends in loads, and estimating loading to downstream waterbodies. Since in many cases nutrient concentrations are measured on a weekly or monthly frequency, there is a need to estimate concentration and loads during periods when no data is available. The objectives of this study were to: (i) document the performance of a multiple regression model to predict loads of nitrate and total phosphorus (TP) in Iowa rivers and streams; (ii) determine whether there is any systematic bias in the load prediction estimates for nitrate and TP; and (iii) evaluate streamflow and concentration factors that could affect the load prediction efficiency. A commonly cited rating curve regression is utilized to estimate riverine nitrate and TP loads for rivers in Iowa with watershed areas ranging from 17.4 to over 34,600km2. Forty-nine nitrate and 44 TP datasets each comprising 5-22years of approximately weekly to monthly concentrations were examined. Three nitrate data sets had sample collection frequencies averaging about three samples per week. The accuracy and precision of annual and long term riverine load prediction was assessed by direct comparison of rating curve load predictions with observed daily loads. Significant positive bias of annual and long term nitrate loads was detected. Long term rating curve nitrate load predictions exceeded observed loads by 25% or more at 33% of the 49 measurement sites. No bias was found for TP load prediction although 15% of the 44 cases either underestimated or overestimate observed long-term loads by more than 25%. The rating curve was found to poorly characterize nitrate and phosphorus variation in some rivers. ?? 2010 .

  2. PROSPECTS OF ESTABLISHING EARTHQUAKE RESISTANT BUILDINGS FROM TUBE CONCRETE CONSTRUCTIONS

    Directory of Open Access Journals (Sweden)

    Abdujafar I. Akaev

    2017-01-01

    Full Text Available Abstract. Objectives The aim of the research is to find optimal design solutions for the erection of buildings that will ensure their reliability and durability, compliance with environmental requirements, fire resistance and earthquake resistance. In this regard, the task is to determine the advantages and prospects of erecting earthquake resistant buildings from tube concrete constructions, since they are distinct in constructive, technological and economic efficiency when are used as vertical load-bearing struts of high-rise buildings. Method The technique for calculating the strength of normal sections of eccentrically-compressed tube concrete elements uses a nonlinear deformation model, taking into account the joint operation of the steel shell and the concrete core under the conditions of triaxial compression. Results In the article the review of the newest world experience of using tube concrete as vertical load-bearing structures for public facilities from the standpoint of earthquake resistant construction is given. The international practices of public facility construction ranging in height from 100 to 600 m with the use of tube concrete technology, including regions with dangerous natural and man-made conditions, have been studied. The structural, operational and technological advantages and disadvantages of tube concrete technology are analysed. Methods for calculating the strength of concrete tube elements in the case of central compression are considered: according to the so-called deformation theory, the state of total destruction of both concrete and tube fluidity attained at maximum pressure are indicated by the beginning of "tube flow on the longitudinal axis". The advantages and disadvantages of both methods are shown. Factors constraining the introduction and wider application of tube concrete constructions in Russia are considered. Conclusion While the advantages of concrete tube constructions in their extensive

  3. Parvovirus B19 infection in pregnancy: maternal and fetal viral load measurements related to clinical parameters

    NARCIS (Netherlands)

    de Haan, Timo R.; Beersma, Matthijs F. C.; Oepkes, Dick; de Jong, Eveline P.; Kroes, Aloys C. M.; Walther, Frans J.

    2007-01-01

    To correlate quantitative maternal and fetal parvovirus B19 (B19V) viral loads and antibody levels at intrauterine transfusion (IUT) as a predictor of fetal morbidity. Prospectively collected clinical data and quantitative B19V viral load and specific IgM and IgG values in fetal and maternal blood

  4. High power s-band vacuum load

    Energy Technology Data Exchange (ETDEWEB)

    Neubauer, Michael [Muons, Inc., Batavia, IL (United States); Dudas, Alan [Muons, Inc., Batavia, IL (United States); Krasnykh, Anatoly [SLAC National Accelerator Lab., Menlo Park, CA (United States)

    2016-12-29

    Through a combination of experimentation and calculation the components of a novel room temperature dry load were successfully fabricated. These components included lossy ceramic cylinders of various lengths, thicknesses, and percent of silicon carbide (SiC). The cylinders were then assembled into stainless steel compression rings by differential heating of the parts and a special fixture. Post machining of this assembly provided a means for a final weld. The ring assemblies were then measured for S-parameters, individually and in pairs using a low-cost TE10 rectangular to TE01 circular waveguide adapter specially designed to be part of the final load assembly. Matched pairs of rings were measured for assembly into the final load, and a sliding short designed and fabricated to assist in determining the desired short location in the final assembly. The plan for the project was for Muons, Inc. to produce prototype loads for long-term testing at SLAC. The STTR funds for SLAC were to upgrade and operate their test station to ensure that the loads would satisfy their requirements. Phase III was to be the sale to SLAC of loads that Muons, Inc. would manufacture. However, an alternate solution that involved a rebuild of the old loads, reduced SLAC budget projections, and a relaxed time for the replacement of all loads meant that in-house labor will be used to do the upgrade without the need for the loads developed in this project. Consequently, the project was terminated before the long term testing was initiated. However, SLAC can use the upgraded test stand to compare the long-term performance of the ones produced in this project with their rebuilt loads when they are available.

  5. High power s-band vacuum load

    International Nuclear Information System (INIS)

    Neubauer, Michael; Dudas, Alan; Krasnykh, Anatoly

    2016-01-01

    Through a combination of experimentation and calculation the components of a novel room temperature dry load were successfully fabricated. These components included lossy ceramic cylinders of various lengths, thicknesses, and percent of silicon carbide (SiC). The cylinders were then assembled into stainless steel compression rings by differential heating of the parts and a special fixture. Post machining of this assembly provided a means for a final weld. The ring assemblies were then measured for S-parameters, individually and in pairs using a low-cost TE10 rectangular to TE01 circular waveguide adapter specially designed to be part of the final load assembly. Matched pairs of rings were measured for assembly into the final load, and a sliding short designed and fabricated to assist in determining the desired short location in the final assembly. The plan for the project was for Muons, Inc. to produce prototype loads for long-term testing at SLAC. The STTR funds for SLAC were to upgrade and operate their test station to ensure that the loads would satisfy their requirements. Phase III was to be the sale to SLAC of loads that Muons, Inc. would manufacture. However, an alternate solution that involved a rebuild of the old loads, reduced SLAC budget projections, and a relaxed time for the replacement of all loads meant that in-house labor will be used to do the upgrade without the need for the loads developed in this project. Consequently, the project was terminated before the long term testing was initiated. However, SLAC can use the upgraded test stand to compare the long-term performance of the ones produced in this project with their rebuilt loads when they are available.

  6. Load power device, system and method of load control and management employing load identification

    Science.gov (United States)

    Yang, Yi; Luebke, Charles John; Schoepf, Thomas J.

    2018-01-09

    A load power device includes a power input, at least one power output for at least one load, a plurality of sensors structured to sense voltage and current at the at least one power output, and a processor. The processor provides: (a) load identification based upon the sensed voltage and current, and (b) load control and management based upon the load identification.

  7. Prospective teachers information and communication technology metaphors

    Directory of Open Access Journals (Sweden)

    Ömür Akdemir

    2015-04-01

    Full Text Available Determination of the perceptions of the prospective teachers for the Information and Communications Technology (ICT terms have a remarkable potential to provide input for technology integration plans and ICT trainings. Within this context, the purpose of this study is to discover the metaphors constructed by prospective teachers for the ICT terms. Data were gathered from 180 prospective teachers through survey. 977 valid metaphors constructed by the participants were grouped into conceptual categories for the six ICT terms. The most common conceptual categories are “developing and changing” for technology, “making life easy” for computers and search engines, “limitless and endless” for the Internet, “means of communication” for social networks, and “addictive items” for video games. Future research should concentrate on investigating the match and mismatches between intended use of the ICT tools and the perception of the prospective teachers.

  8. Passive detection of vehicle loading

    Science.gov (United States)

    McKay, Troy R.; Salvaggio, Carl; Faulring, Jason W.; Salvaggio, Philip S.; McKeown, Donald M.; Garrett, Alfred J.; Coleman, David H.; Koffman, Larry D.

    2012-01-01

    The Digital Imaging and Remote Sensing Laboratory (DIRS) at the Rochester Institute of Technology, along with the Savannah River National Laboratory is investigating passive methods to quantify vehicle loading. The research described in this paper investigates multiple vehicle indicators including brake temperature, tire temperature, engine temperature, acceleration and deceleration rates, engine acoustics, suspension response, tire deformation and vibrational response. Our investigation into these variables includes building and implementing a sensing system for data collection as well as multiple full-scale vehicle tests. The sensing system includes; infrared video cameras, triaxial accelerometers, microphones, video cameras and thermocouples. The full scale testing includes both a medium size dump truck and a tractor-trailer truck on closed courses with loads spanning the full range of the vehicle's capacity. Statistical analysis of the collected data is used to determine the effectiveness of each of the indicators for characterizing the weight of a vehicle. The final sensing system will monitor multiple load indicators and combine the results to achieve a more accurate measurement than any of the indicators could provide alone.

  9. PASSIVE DETECTION OF VEHICLE LOADING

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, A.

    2012-01-03

    The Digital Imaging and Remote Sensing Laboratory (DIRS) at the Rochester Institute of Technology, along with the Savannah River National Laboratory is investigating passive methods to quantify vehicle loading. The research described in this paper investigates multiple vehicle indicators including brake temperature, tire temperature, engine temperature, acceleration and deceleration rates, engine acoustics, suspension response, tire deformation and vibrational response. Our investigation into these variables includes building and implementing a sensing system for data collection as well as multiple full-scale vehicle tests. The sensing system includes; infrared video cameras, triaxial accelerometers, microphones, video cameras and thermocouples. The full scale testing includes both a medium size dump truck and a tractor-trailer truck on closed courses with loads spanning the full range of the vehicle's capacity. Statistical analysis of the collected data is used to determine the effectiveness of each of the indicators for characterizing the weight of a vehicle. The final sensing system will monitor multiple load indicators and combine the results to achieve a more accurate measurement than any of the indicators could provide alone.

  10. Determination of stresses caused by fluctuation of acoustic load in the steam dryers of a BWR; Determinacion de esfuerzos originados por fluctuacion de carga acustica en los secadores de vapor de un reactor BWR

    Energy Technology Data Exchange (ETDEWEB)

    Centeno P, J.; Quezada G, S.; Prieto G, A.; Vazquez R, A.; Espinosa P, G. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico); Nunez C, A., E-mail: javcuami26@hotmail.com [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Jose Ma. Barragan No. 779, Col. Narvarte, 03020 Mexico D. F. (Mexico)

    2014-10-15

    The extended power up-rate (EPU) in a nuclear power plant cause various problems in BWR components also in the steam system. This due to increased steam flow generated in the reactor and is conveyed to the turbine by the four main steam lines (MSL). One of the most serious problems is the generation of acoustic pressure loads in the metal structure of the steam dryer which eventually leads to fatigue failure and even the appearance of cracks, and in turn it causes loose parts that are entrained by the steam and transported in the MSL. This problem is due to the fluctuation of load acoustics caused by the union of the safety or relief valves (SRV) with the MSL, spreading through these to reach the reactor pressure vessel (RPV) where the effect of resonance of the acoustic wave is amplified and impacts directly in the supporting structure of the steam dryer, skirt and the panels where the mixture liquid-steam is dried, by centrifugation effect and runoff of liquid water. Efforts in the steam dryer operating conditions of EPU for two cases will be analyzed in this work, the first is before the installation of Acoustic Side Branch (ASB), and in the second case we consider the installation of said ASB in the standpipes of SRV. The analysis was performed with numerical experiments on a platform for computational fluid dynamics with virtual geometries previously designed based on the actual components of the reactor and steam system. The model to study is delimited by the top of the RPV, the steam dryer and a section of each of the four MSL with ten standpipes of SRV. With the obtained data and considering the mechanical-structural properties of the steam dryer material, we can evaluate the mechanical resistance to impacts by acoustic pressure load and its possible deformation or cracking. (Author)

  11. Development of a load cell for mechanical testing in hydrogen

    International Nuclear Information System (INIS)

    McCabe, L.P.

    1982-01-01

    Mechanical testing in hydrogen environments is performed on materials to determine hydrogen compatibility. Many tests are performed on small test samples in pressure vessels where monitoring of actual sample load is difficult. A method was developed to monitor small samples by placing inside the vessel a miniature load cell which is capable of measuring loads of less than 100 lbs. The load cell monitors load by means of a Wheatstone Bridge circuit composed of four strain gages. Two of the gages are mounted on a stainless steel stub which becomes part of the vessel load string; the others are wired outside the pressure vessel. Previously, load cells have been short-lived because of hydrogen diffusion into the epoxy-phenolic adhesive used to attach the strain gages to the stub. The use of a flame-sprayed ceramic, however, rather than an organic epoxy to mount the strain gages appears to produce a load cell resistant to the hydrogen test environment

  12. Probability Based Evaluation of Vehicular Bridge Load using Weigh-in-Motion Data

    OpenAIRE

    Widi Nugraha; Indra Djati Sidi

    2016-01-01

    Load and Resistance Factored Design (LRFD) method for designing bridge in Indonesia have been implemented for more than 25 years. LRFD method treating loads and strengths variables as random variables with specific safety factors for different loads and strengths variables type. The nominal loads, load factors, reduction factors, and other criteria for bridge design code can be determined to meet the reliability criteria. Statistical data of weigh-in-motion (WIM) vehicular loads measurement i...

  13. Acoustic Measures of Voice and Physiologic Measures of Autonomic Arousal during Speech as a Function of Cognitive Load.

    Science.gov (United States)

    MacPherson, Megan K; Abur, Defne; Stepp, Cara E

    2017-07-01

    This study aimed to determine the relationship among cognitive load condition and measures of autonomic arousal and voice production in healthy adults. A prospective study design was conducted. Sixteen healthy young adults (eight men, eight women) produced a sentence containing an embedded Stroop task in each of two cognitive load conditions: congruent and incongruent. In both conditions, participants said the font color of the color words instead of the word text. In the incongruent condition, font color differed from the word text, creating an increase in cognitive load relative to the congruent condition in which font color and word text matched. Three physiologic measures of autonomic arousal (pulse volume amplitude, pulse period, and skin conductance response amplitude) and four acoustic measures of voice (sound pressure level, fundamental frequency, cepstral peak prominence, and low-to-high spectral energy ratio) were analyzed for eight sentence productions in each cognitive load condition per participant. A logistic regression model was constructed to predict the cognitive load condition (congruent or incongruent) using subject as a categorical predictor and the three autonomic measures and four acoustic measures as continuous predictors. It revealed that skin conductance response amplitude, cepstral peak prominence, and low-to-high spectral energy ratio were significantly associated with cognitive load condition. During speech produced under increased cognitive load, healthy young adults show changes in physiologic markers of heightened autonomic arousal and acoustic measures of voice quality. Future work is necessary to examine these measures in older adults and individuals with voice disorders. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  14. Visual perceptual load induces inattentional deafness.

    Science.gov (United States)

    Macdonald, James S P; Lavie, Nilli

    2011-08-01

    In this article, we establish a new phenomenon of "inattentional deafness" and highlight the level of load on visual attention as a critical determinant of this phenomenon. In three experiments, we modified an inattentional blindness paradigm to assess inattentional deafness. Participants made either a low- or high-load visual discrimination concerning a cross shape (respectively, a discrimination of line color or of line length with a subtle length difference). A brief pure tone was presented simultaneously with the visual task display on a final trial. Failures to notice the presence of this tone (i.e., inattentional deafness) reached a rate of 79% in the high-visual-load condition, significantly more than in the low-load condition. These findings establish the phenomenon of inattentional deafness under visual load, thereby extending the load theory of attention (e.g., Lavie, Journal of Experimental Psychology. Human Perception and Performance, 25, 596-616, 1995) to address the cross-modal effects of visual perceptual load.

  15. Variations in cerebrospinal fluid viral loads among enterovirus genotypes in patients hospitalized with laboratory-confirmed meningitis due to enterovirus.

    Science.gov (United States)

    Volle, Romain; Bailly, Jean-Luc; Mirand, Audrey; Pereira, Bruno; Marque-Juillet, Stéphanie; Chambon, Martine; Regagnon, Christel; Brebion, Amélie; Henquell, Cécile; Peigue-Lafeuille, Hélène; Archimbaud, Christine

    2014-08-15

    Acute enterovirus (EV) meningitis is a major cause of hospitalization among adults and children. It is caused by multiple EV genotypes assigned to 4 species (EV-A, EV-B, EV-C, and EV-D). We determined viral loads in the cerebrospinal fluid (CSF) of 156 patients of all ages with EV meningitis during a 5-year observational prospective study. The virus strains were genotyped, and their time origin was determined with Bayesian phylogenetic methods. The CSF viral loads ranged between 3.4 and 7.5 log10 copies/mL (median, 4.9 log10 copies/mL). They were higher in neonates than in infants and children (P = .02) but were comparable in adults. Viral loads were associated with EV genotypes (P < .001). The EV strains were identified in 152 of 156 patients and assigned to 23 genotypes within the EV-A and EV-B species. The most frequent genotypes, echoviruses 6 and 30, were associated with different viral loads (P < .001). The highest viral loads were in meningitis cases caused by coxsackievirus A9, B4, and B5 genotypes. Most patients infected by a same genotype were infected by a major virus variant of recent emergence. The variations in CSF viral loads in patients at the onset of EV meningitis are related to genotypic differences in the virus strains involved. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  16. LOADING OF MECHANICAL TRANSMISSION OF TROLLEYBUS TRACTION DRIVING GEAR

    Directory of Open Access Journals (Sweden)

    A. I. Safonov

    2009-01-01

    Full Text Available The paper analyzes factors that determine dynamic loads of mechanical transmission of trolleybus traction driving gear. The paper proposes a methodology for determination of calculative moments of loading transmission elements. Results of the research are analyzed and recommendations on  dynamic reduction of trolleybus transmission are given in the paper. 

  17. Boletus edulis loaded with γ-Fe2O3 nanoparticles as a magnetic sorbent for preconcentration of Co(II) and Sn(II) prior to their determination by ICP-OES.

    Science.gov (United States)

    Ozdemir, Sadin; Serkan Yalcin, M; Kilinc, Ersin; Soylak, Mustafa

    2017-12-20

    The authors show that the fungus Boletus edulis loaded with γ-Fe 2 O 3 nanoparticles is a viable sorbent for magnetic solid phase extraction of trace levels of Co(II) and Sn(II). The surface structure of immobilized magnetized B. edulis was characterized by FT-IR, SEM and EDX. Experimental parameters were optimized. Following elution with 1 M HCl, the ions were quantified by ICP-OES. The limits of detection are 21 pg·mL -1 for Co(II), and 19 pg·mL -1 for Sn(II). The preconcentration factors are 100 for both ions. The sorption capacities of the sorbent are 35.8 mg·g -1 for Co(II) and 29.6 mg·g -1 for Sn(II). The method was applied to the analysis of certificated reference materials and gave ≥95% recoveries with low RSDs. It was also successfully applied to the quantification of Co(II) and Sn(II) in spiked environmental and food samples. Graphical abstract The fungus Boletus edulis loaded with γ-Fe 2 O 3 nanoparticles is a viable biosorbent for magnetic solid phase extraction (MSPE) of trace levels of Co(II) and Sn(II). The surface structure of immobilized magnetized B. edulis was characterized by FT-IR, SEM and EDX. Experimental parameters were optimized.

  18. Loading method of core constituting elements

    International Nuclear Information System (INIS)

    Kasai, Shigeo

    1976-01-01

    Purpose: To provide a remote-controlled replacing method for core constituting elements in a liquid-metal cooling fast breeder, wherein particularly, the core constituting elements are prevented from being loaded on the core position other than as designated. Constitution: The method comprises a first step which determines a position of a suitable neutron shielding body in order to measure a reference level of complete insertion of the core constituting elements, a second step which inserts a gripper for a fuel exchanger, a third step which decides stroke dimensions of the complete insertion, and a fourth step which discriminates the core constituting elements to begin handling of fuel rods. The method further comprises a fifth step which determines a loading position of fuel rod, and a sixth step which inserts and loads fuel rods into the core. The method still further comprises a seventh step which compares and judges the dimension of loading stroke and the dimension of complete inserting stroke so that when coincided, loading is completed, and when not coincided, loading is not completed and then the cycle of the fourth step is repeated. (Kawakami, Y.)

  19. Evaluative pressure overcomes perceptual load effects.

    Science.gov (United States)

    Normand, Alice; Autin, Frédérique; Croizet, Jean-Claude

    2015-06-01

    Perceptual load has been found to be a powerful bottom-up determinant of distractibility, with high perceptual load preventing distraction by any irrelevant information. However, when under evaluative pressure, individuals exert top-down attentional control by giving greater weight to task-relevant features, making them more distractible from task-relevant distractors. One study tested whether the top-down modulation of attention under evaluative pressure overcomes the beneficial bottom-up effect of high perceptual load on distraction. Using a response-competition task, we replicated previous findings that high levels of perceptual load suppress task-relevant distractor response interference, but only for participants in a control condition. Participants under evaluative pressure (i.e., who believed their intelligence was assessed) showed interference from task-relevant distractor at all levels of perceptual load. This research challenges the assumptions of the perceptual load theory and sheds light on a neglected determinant of distractibility: the self-relevance of the performance situation in which attentional control is solicited.

  20. Perceiving prospects properly

    Czech Academy of Sciences Publication Activity Database

    Steiner, Jakub; Stewart, C.

    2016-01-01

    Roč. 106, č. 7 (2016), s. 1601-1631 ISSN 0002-8282 Institutional support: RVO:67985998 Keywords : evolution * perception bias * prospect theory Subject RIV: AH - Economics Impact factor: 4.026, year: 2016

  1. Maximum allowable load on wheeled mobile manipulators

    International Nuclear Information System (INIS)

    Habibnejad Korayem, M.; Ghariblu, H.

    2003-01-01

    This paper develops a computational technique for finding the maximum allowable load of mobile manipulator during a given trajectory. The maximum allowable loads which can be achieved by a mobile manipulator during a given trajectory are limited by the number of factors; probably the dynamic properties of mobile base and mounted manipulator, their actuator limitations and additional constraints applied to resolving the redundancy are the most important factors. To resolve extra D.O.F introduced by the base mobility, additional constraint functions are proposed directly in the task space of mobile manipulator. Finally, in two numerical examples involving a two-link planar manipulator mounted on a differentially driven mobile base, application of the method to determining maximum allowable load is verified. The simulation results demonstrates the maximum allowable load on a desired trajectory has not a unique value and directly depends on the additional constraint functions which applies to resolve the motion redundancy

  2. Determinación del límite de rotura de un cable por Método de los Elementos Finitos. // Determination of resistance load on steel wire rope by Finite Elements Method.

    Directory of Open Access Journals (Sweden)

    F. Aguilar Parés

    2008-09-01

    Full Text Available En ocasiones, se desconocen las características originales de un cable de acero. En estos casos, generalmente se estima ellímite de rotura de un cable a partir del límite de rotura de un alambre del cable. En el presente trabajo, se propone emplearun método para estimar el límite de rotura del cable en base al modelado del cordón mediante elementos finitos. En elcontenido se explica detalladamente el procedimiento y es ejemplificado. El procedimiento es iniciado con el dibujo delcable en un programa de diseño gráfico parámetrico y posteriormente se describen las características generales delmodelado con un programa especializado en el Método de Elementos Finitos. En el análisis se incluye la influencia delcontacto entre los alambres que forman el cordón. Por último, se comparan los resultados obtenidos para el límite de roturadel cable con los datos declarados por el fabricante. Con este procedimiento fueron obtenidos valores mediante modeladodel cable con diferencias entre el 11% al 2,5% en relación al límite de rotura declarado por los fabricantes. Las diferenciasfueron evidenciadas en dependencia de la calidad del mallado empleado.Palabras claves: Cables de acero, elementos finitos, carga límite de rotura._________________________________________________________________________Abstract:In occasions, the original characteristics of steel wire rope are unknown. In these cases, could be estimated the resistanceof the wire rope knowing the wire resistance. In this proposal method for estimating the resistance load of steel wire thecord of the wire rope is modelling using finite elements. Procedure is explained and a sample with a selected wire rope ispresented. It is started with the drawing of the wire rope by professional software. General characteristics of themodelling are described with FEM software. In the analysis, the contact influence in the wires of the cord is included.Lastly, the obtained results of the resistance

  3. Ocean Tide Loading Computation

    Science.gov (United States)

    Agnew, Duncan Carr

    2005-01-01

    September 15,2003 through May 15,2005 This grant funds the maintenance, updating, and distribution of programs for computing ocean tide loading, to enable the corrections for such loading to be more widely applied in space- geodetic and gravity measurements. These programs, developed under funding from the CDP and DOSE programs, incorporate the most recent global tidal models developed from Topex/Poscidon data, and also local tide models for regions around North America; the design of the algorithm and software makes it straightforward to combine local and global models.

  4. DYNAMIC LOAD DAMPER MODELING

    Directory of Open Access Journals (Sweden)

    Loktev Aleksey Alekseevich

    2013-01-01

    Full Text Available The authors present their findings associated with their modeling of a dynamic load damper. According to the authors, the damper is to be installed onto a structure or its element that may be exposed to impact, vibration or any other dynamic loading. The damper is composed of paralleled or consecutively connected viscous and elastic elements. The authors study the influence of viscosity and elasticity parameters of the damper produced onto the regular displacement of points of the structure to be protected and onto the regular acceleration transmitted immediately from the damper to the elements positioned below it.

  5. The determination of some heavy metals in food samples by flame atomic absorption spectrometry after their separation-preconcentration on bis salicyl aldehyde, 1,3 propan diimine (BSPDI) loaded on activated carbon

    International Nuclear Information System (INIS)

    Ghaedi, M.; Shokrollahi, A.; Kianfar, A.H.; Mirsadeghi, A.S.; Pourfarokhi, A.; Soylak, M.

    2008-01-01

    A sensitive and simple method for the simultaneous preconcentration of Cr 3+ , Fe 3+ , Cu 2+ , Ni 2+ , Co 2+ and Zn 2+ in real samples has been reported. The method is based on the adsorption of analytes on bis salicyl aldehyde, 1,3 propan diimine (BSPDI) loaded on activated carbon. The adsorbed metals on modified activated carbon were eluted using 8 mL of 2 mol L -1 nitric acid in acetone or 10 mL of 4 mol L -1 HNO 3 . The influences of the analytical parameters including pH and sample volume were investigated. The effects of matrix ions on the retentions of the analytes were also examined. The recoveries of analytes were generally quantitative. The method has been successfully applied for these metals content evaluation in some food samples

  6. Evaluation of the performance of Abbott m2000 and Roche COBAS Ampliprep/COBAS Taqman assays for HIV-1 viral load determination using dried blood spots and dried plasma spots in Kenya.

    Science.gov (United States)

    Zeh, Clement; Ndiege, Kenneth; Inzaule, Seth; Achieng, Rebecca; Williamson, John; Chih-Wei Chang, Joy; Ellenberger, Dennis; Nkengasong, John

    2017-01-01

    Routine HIV viral load testing is not widely accessible in most resource-limited settings, including Kenya. To increase access to viral load testing, alternative sample types like dried blood spots (DBS), which overcome the logistic barriers associated with plasma separation and cold chain shipment need to be considered and evaluated. The current study evaluated matched dried blood spots (DBS) and dried plasma spots (DPS) against plasma using the Abbott M 2000 (Abbott) and Roche Cobas Ampliprep/Cobas TaqMan (CAP/CTM) quantitative viral load assays in western Kenya. Matched plasma DBS and DPS were obtained from 200 HIV-1 infected antiretroviral treatment (ART)-experienced patients attending patient support centers in Western Kenya. Standard quantitative assay performance parameters with accompanying 95% confidence intervals (CI) were assessed at the assays lower detection limit (400cps/ml for CAP/CTM and 550cps/ml for Abbott) using SAS version 9.2. Receiver operating curves (ROC) were further used to assess viral-load thresholds with best assay performance (reference assay CAP/CTM plasma). Using the Abbott test, the sensitivity and specificity, respectively, for DPS were (97.3%, [95%CI: 93.2-99.2] and 98.1% [95%CI: 89.7-100]) and those for DBS (93.9% [95%CI: 88.8-97.2] and 88.0% [95%CI: 82.2-92.4]). The correlation and agreement using paired plasma and DPS/DBS were strong, with r2 = 90.5 and rc = 68.1. The Bland-Altman relative percent change was 95.3 for DPS, (95%CI: 90.4-97.7) and 73.6 (95%CI: 51.6-86.5) for DBS. Using the CAP/CTM assay, the sensitivity for DBS was significantly higher compared to DPS (100.0% [95% CI: 97.6-100.0] vs. 94.7% [95%CI: 89.8-97.7]), while the specificity for DBS was lower: 4%, [95% CI: 0.4-13.7] compared to DPS: 94.0%, [95% CI: 83.5-98.7]. When compared under different clinical relevant thresholds, the accuracy for the Abbott assay was 95% at the 1000cps/ml cut-off with a sensitivity and specificity of 96.6% [95% CI 91.8-98.7] and 90

  7. Prospects and challenges for the FPSO

    International Nuclear Information System (INIS)

    Henery, D.; Inglis, R.B.

    1995-01-01

    The reasons for the recent growth of interest in the use of the Floating Production Storage and Off-loading (FPSO) system in oil field developments are examined. An evaluation of oil field characteristics that influence concept selection is made which shows that the FPSO is a very flexible solution in a wide range of situations. Costs and cost drivers are discussed and some measures of cost effectiveness are proposed to serve as benchmarks for the future. Some technology development challenges are identified. The findings give a high level view of the techno-economic prospects for the FPSO in field developments over the next decade

  8. Potential Prospects of Turkey in Africa

    OpenAIRE

    Gorgulu, Mehmet Emre

    2010-01-01

    As the global crisis surrounds us, Turkey, as a country with huge prospects, needs to establish new political and commercial links with the rest of the world in order to lessen the effects of the global crisis. This can be a way to take the load off Turkey’s shoulders. These links can be found in the continent Africa. As the host of world’s several fastest growing economies, the continent offers new opportunities for Turkey. These opportunities can be utilized as either in the form of Foreign...

  9. HIV Viral Load

    Science.gov (United States)

    ... PF4 Antibody Hepatitis A Testing Hepatitis B Testing Hepatitis C Testing HER2/neu Herpes Testing High-sensitivity C-reactive Protein (hs-CRP) Histamine Histone Antibody HIV Antibody and HIV Antigen (p24) HIV Antiretroviral Drug Resistance Testing, Genotypic HIV Viral Load HLA Testing HLA- ...

  10. Loading device for incinerator

    International Nuclear Information System (INIS)

    Hempelmann, W.

    1983-01-01

    An incinerator for radioactive waste is described. Heat radiation from the incinerator into the loading device is reduced by the design of the slider with a ceramic plate and the conical widening of the pot, and also by fixing a metal plate between the pot and the floor. (PW) [de

  11. Side loading filter apparatus

    International Nuclear Information System (INIS)

    Reynolds, K.E.

    1981-01-01

    A side loading filter chamber for use with radioactive gases is described. The equipment incorporates an inexpensive, manually operated, mechanism for aligning filter units with a number of laterally spaced wall openings and for removing the units from the chamber. (U.K.)

  12. EQUATING FACULTY LOADS.

    Science.gov (United States)

    OOSTING, KENNETH W.

    AT ALPENA COMMUNITY COLLEGE, A NORMAL TEACHING LOAD FOR ANY FACULTY MEMBER IS 14-16 SEMESTER HOURS, WITH 75-125 STUDENTS AND 2-3 PREPARATIONS. VARIATIONS FROM THE SCHEDULE ARE IN ACCORDANCE WITH SPECIFIC FORMULAS RELATING TO TOTAL MEMBERS OF STUDENTS, NUMBERS OF PREPARATIONS, ASSIGNMENT TO ENGLISH COMPOSITION CLASSES, NEW COURSES, AND CLASSES…

  13. Probabilistic Load Flow

    DEFF Research Database (Denmark)

    Chen, Peiyuan; Chen, Zhe; Bak-Jensen, Birgitte

    2008-01-01

    This paper reviews the development of the probabilistic load flow (PLF) techniques. Applications of the PLF techniques in different areas of power system steady-state analysis are also discussed. The purpose of the review is to identify different available PLF techniques and their corresponding...

  14. Duration of load revisited

    DEFF Research Database (Denmark)

    Hoffmeyer, Preben; Sørensen, John Dalsgaard

    2007-01-01

    A duration of load study representing 13 years of testing was recently terminated. Preliminary results have been published over the years. This paper represents the final account of the study, which was focused on the influ-ence of moisture content on time to failure for structural timber subject...

  15. Robust surgery loading

    NARCIS (Netherlands)

    Hans, Elias W.; Wullink, Gerhard; van Houdenhoven, Mark; Kazemier, Geert

    2008-01-01

    We consider the robust surgery loading problem for a hospital’s operating theatre department, which concerns assigning surgeries and sufficient planned slack to operating room days. The objective is to maximize capacity utilization and minimize the risk of overtime, and thus cancelled patients. This

  16. Temoporfin-loaded liposomes

    DEFF Research Database (Denmark)

    Kuntsche, Judith; Freisleben, Ines; Steiniger, Frank

    2010-01-01

    . In contrast, if phospholipids with longer fatty acid chains (distearoylphosphatidylcholine/-glycerol) were used, phase transitions were well above body temperature even at high drug load. Size and thermal behavior were not distinctly influenced by the addition of pegylated lipids but cryo-electron microscopic...

  17. A review of the wind loading zones for flat roofs in code provisions

    NARCIS (Netherlands)

    Geurts, C.P.W.; Kopp, G.A.; Morrison, M.J.

    2013-01-01

    The provisions for wind loads on flat roofs differ considerably between current wind loading standards in different jurisdictions. For a number of major wind loading codes, both the definition of roof zones, and the values applied to determine the wind loads are discussed. This paper concentrates on

  18. The effect of loading rate on pile bearing capacity of saturated sand

    NARCIS (Netherlands)

    Archeewa, E.

    2005-01-01

    Pile load tests are commonly used by engineers to determine its bearing capacity. At present, there are three methods of pile load tests: the static, the dynamic and the quasi-static test. The static pile load test is done by applying an axial load on the pile with a long duration. The dynamic and

  19. Performance in tactical decision making on the physical load in the game.

    OpenAIRE

    Navara, Ondřej

    2015-01-01

    Title: Performance in tactical decision-making on the physical load in the game. Objectives: Determine the relationship between the physical load and tactical decision making. Methods: Watching. Results: The greater the physical load, the smaller the rightness of tactical decision-making. Keywords: Tactical decision-making, soccer, physical load.

  20. How important is importance for prospective memory? A review

    Directory of Open Access Journals (Sweden)

    Stefan eWalter

    2014-06-01

    Full Text Available Forgetting to carry out an intention as planned can have serious consequences in everyday life. People sometimes even forget intentions that they consider as very important. Here, we review the literature on the impact of importance on prospective memory performance. We highlight different methods used to manipulate the importance of a prospective memory task such as providing rewards, importance relative to other ongoing activities, absolute importance, and providing social motives. Moreover, we address the relationship between importance and other factors known to affect prospective memory and ongoing task performance such as type of prospective memory task (time-, event- or activity-based, cognitive loads, and cue focality. Finally, we provide a connection to motivation, we summarize the effects of task importance and we identify important venues for future research.