Analysis of the Kaplan turbine draft tube effect

Science.gov (United States)

Motycak, L.; Skotak, A.; Obrovsky, J.

2010-08-01

The aim of this paper is to present information about possible problems and errors which can appear during numerical analyses of low head Kaplan turbines with a view to the runner - draft tube interaction. The setting of numerical model, grid size, used boundary conditions are the interface definition between runner and draft tube are discussed. There are available data from physical model tests which gives a great opportunity to compare CFD and experiment results and on the basis of this comparison to determine the approach to the CFD flow modeling. The main purpose for the Kaplan turbine model measurement was to gather the information about real flow field. The model tests were carried out in new hydraulic laboratory of CKD Blansko Engineering. The model tests were focused on the detailed velocity measurements downstream of the runner by differential pressure probe and on the velocity measurement downstream of the draft tube elbow by Particle Image Velocimetry method (PIV). The data from CFD simulation were compared to the velocity measurement results. In the paper also the design of the original draft tube modification due to flow improvement is discussed in the case of the Kaplan turbine uprating project. The results of the draft tube modification were confirmed by model tests in the hydraulic laboratory as well.

Improved Governing of Kaplan Turbine Hydropower Plants Operating Island Grids

OpenAIRE

Gustafsson, Martin

2013-01-01

To reduce the consequences of a major fault in the electric power grid, functioning parts of the grid can be divided into smaller grid islands. The grid islands are operated isolated from the power network, which places new demands on a faster frequency regulation. This thesis investigates a Kaplan turbine hydropower plant operating an island grid. The Kaplan turbine has two control signals, the wicket gate and the turbine blade positions, controlling the mechanical power. The inputs are comb...

Kaplan og Norton bør læses af hele ledelsen

DEFF Research Database (Denmark)

Bukh, Per Nikolaj

2009-01-01

Anmeldelse af "Eksekveringsgevinsten - Øget konkurrencekraft med fokuseret strategi og drift", Robert S. Kaplan & David P. Norton, 2009, Gyldendal Business. Udgivelsesdato: 8. april......Anmeldelse af "Eksekveringsgevinsten - Øget konkurrencekraft med fokuseret strategi og drift", Robert S. Kaplan & David P. Norton, 2009, Gyldendal Business. Udgivelsesdato: 8. april...

Kaplan-Narayanan-Neuberger lattice fermions pass a perturbative test

International Nuclear Information System (INIS)

Aoki, S.; Levien, R.B.

1995-01-01

We test perturbatively a recent scheme for implementing chiral fermions on the lattice, proposed by Kaplan and modified by Narayanan and Neuberger, using as our testing ground the chiral Schwinger model. The scheme is found to reproduce the desired form of the effective action, whose real part is gauge invariant and whose imaginary part gives the correct anomaly in the continuum limit, once technical problems relating to the necesary infinite extent of the extra dimension are properly addressed. The indications from this study are that the Kaplan-Narayanan-Neuberger scheme has a good chance at being a correct lattice regularization of chiral gauge theories

Improvements of a Kaplan type small turbine: Forbedre og vidreutvikle en Kaplan småturbin

OpenAIRE

Fjærvold, Lars

2012-01-01

The goal with this master thesis was to establish Hill diagrams and improve a Kaplan turbine intended for use in Afghanistan. The turbine efficiency has been tested in setting 1 and 2. Turbine efficiency in setting 3 and 4 could not be tested because the runner blades interfere with the housing making it impossible to rotate the turbine. The efficiency was tested with an effective pressure head ranging from 2 to 8 meters. Best efficiency point was not reached because of limitations in the te...

rLj-RGD3, a Novel Recombinant Toxin Protein from Lampetra japonica, Protects against Cerebral Reperfusion Injury Following Middle Cerebral Artery Occlusion Involving the Integrin-PI3K/Akt Pathway in Rats.

Directory of Open Access Journals (Sweden)

Qian Lu

Full Text Available The RGD-toxin protein Lj-RGD3 is a naturally occurring 118 amino acid peptide that can be obtained from the salivary gland of the Lampetra japonica fish. This unique peptide contains 3 RGD (Arg-Gly-Asp motifs in its primary structure. Lj-RGD3 is available in recombinant form (rLj-RGD3 and can be produced in large quantities using DNA recombination techniques. The pharmacology of the three RGD motif-containing peptides has not been studied. This study investigated the protective effects of rLj-RGD3, a novel polypeptide, against ischemia/reperfusion-induced damage to the brain caused by middle cerebral artery occlusion (MCAO in a rat stroke model. We also explored the mechanism by which rLj-RGD3 acts by measuring protein and mRNA expression levels, with an emphasis on the FAK and integrin-PI3K/Akt anti-apoptosis pathways.rLj-RGD3 was obtained from the buccal secretions of Lampetra japonica using gene recombination technology. Sprague Dawley (SD rats were randomly divided into the following seven groups: a sham group; a vehicle-treated (VT group; 100.0 μg·kg-1, 50.0 μg·kg-1 and 25.0 μg·kg-1 dose rLj-RGD3 groups; and two positive controls, including 1.5 mg·kg-1 Edaravone (ED and 100.0 μg·kg-1 Eptifibatide (EP. MCAO was induced using a model consisting of 2 h of ischemia and 24 h of reperfusion. Behavioral changes were observed in the normal and operation groups after focal cerebral ischemia/reperfusion was applied. In addition, behavioral scores were evaluated at 4 and 24 h after reperfusion. Brain infarct volumes were determined based on 2,3,5-triphenyltetrazolium chloride (TTC staining. Pathological changes in brain tissues were observed using hematoxylin and eosin (H&E staining. Moreover, neuronal apoptosis was detected using terminal deoxynucleotidyl transferase-mediated dUTP-biotin nick-end labeling (TUNEL assays. We determined the expression levels of focal adhesion kinase (FAK, phosphatidyl inositol 3-kinase (PI3K, protein kinase B

Some Supplementary Methods for the Analysis of the Delis-Kaplan Executive Function System

Science.gov (United States)

Crawford, John R.; Garthwaite, Paul H.; Sutherland, David; Borland, Nicola

2011-01-01

Supplementary methods for the analysis of the Delis-Kaplan Executive Function System (Delis, Kaplan, & Kramer, 2001) are made available, including (a) quantifying the number of abnormally low achievement scores exhibited by an individual and accompanying this with an estimate of the percentage of the normative population expected to exhibit at…

Multi-objective shape optimization of runner blade for Kaplan turbine

International Nuclear Information System (INIS)

Power machines LMZ, Saint Petersburg (Russian Federation))" data-affiliation=" (OJSC Power machines LMZ, Saint Petersburg (Russian Federation))" >Semenova, A; Power machines LMZ, Saint Petersburg (Russian Federation))" data-affiliation=" (OJSC Power machines LMZ, Saint Petersburg (Russian Federation))" >Pylev, I; Chirkov, D; Lyutov, A; Chemy, S; Skorospelov, V

2014-01-01

Automatic runner shape optimization based on extensive CFD analysis proved to be a useful design tool in hydraulic turbomachinery. Previously the authors developed an efficient method for Francis runner optimization. It was successfully applied to the design of several runners with different specific speeds. In present work this method is extended to the task of a Kaplan runner optimization. Despite of relatively simpler blade shape, Kaplan turbines have several features, complicating the optimization problem. First, Kaplan turbines normally operate in a wide range of discharges, thus CFD analysis of each variant of the runner should be carried out for several operation points. Next, due to a high specific speed, draft tube losses have a great impact on the overall turbine efficiency, and thus should be accurately evaluated. Then, the flow in blade tip and hub clearances significantly affects the velocity profile behind the runner and draft tube behavior. All these features are accounted in the present optimization technique. Parameterization of runner blade surface using 24 geometrical parameters is described in details. For each variant of runner geometry steady state three-dimensional turbulent flow computations are carried out in the domain, including wicket gate, runner, draft tube, blade tip and hub clearances. The objectives are maximization of efficiency in best efficiency and high discharge operation points, with simultaneous minimization of cavitation area on the suction side of the blade. Multiobjective genetic algorithm is used for the solution of optimization problem, requiring the analysis of several thousands of runner variants. The method is applied to optimization of runner shape for several Kaplan turbines with different heads

Multi-objective shape optimization of runner blade for Kaplan turbine

Science.gov (United States)

Semenova, A.; Chirkov, D.; Lyutov, A.; Chemy, S.; Skorospelov, V.; Pylev, I.

2014-03-01

Automatic runner shape optimization based on extensive CFD analysis proved to be a useful design tool in hydraulic turbomachinery. Previously the authors developed an efficient method for Francis runner optimization. It was successfully applied to the design of several runners with different specific speeds. In present work this method is extended to the task of a Kaplan runner optimization. Despite of relatively simpler blade shape, Kaplan turbines have several features, complicating the optimization problem. First, Kaplan turbines normally operate in a wide range of discharges, thus CFD analysis of each variant of the runner should be carried out for several operation points. Next, due to a high specific speed, draft tube losses have a great impact on the overall turbine efficiency, and thus should be accurately evaluated. Then, the flow in blade tip and hub clearances significantly affects the velocity profile behind the runner and draft tube behavior. All these features are accounted in the present optimization technique. Parameterization of runner blade surface using 24 geometrical parameters is described in details. For each variant of runner geometry steady state three-dimensional turbulent flow computations are carried out in the domain, including wicket gate, runner, draft tube, blade tip and hub clearances. The objectives are maximization of efficiency in best efficiency and high discharge operation points, with simultaneous minimization of cavitation area on the suction side of the blade. Multiobjective genetic algorithm is used for the solution of optimization problem, requiring the analysis of several thousands of runner variants. The method is applied to optimization of runner shape for several Kaplan turbines with different heads.

Mathematical, numerical and experimental analysis of the swirling flow at a Kaplan runner outlet

International Nuclear Information System (INIS)

Muntean, S; Ciocan, T; Susan-Resiga, R F; Cervantes, M; Nilsson, H

2012-01-01

The paper presents a novel mathematical model for a-priori computation of the swirling flow at Kaplan runners outlet. The model is an extension of the initial version developed by Susan-Resiga et al [1], to include the contributions of non-negligible radial velocity and of the variable rothalpy. Simple analytical expressions are derived for these additional data from three-dimensional numerical simulations of the Kaplan turbine. The final results, i.e. velocity components profiles, are validated against experimental data at two operating points, with the same Kaplan runner blades opening, but variable discharge.

Mathematical, numerical and experimental analysis of the swirling flow at a Kaplan runner outlet

Science.gov (United States)

Muntean, S.; Ciocan, T.; Susan-Resiga, R. F.; Cervantes, M.; Nilsson, H.

2012-11-01

The paper presents a novel mathematical model for a-priori computation of the swirling flow at Kaplan runners outlet. The model is an extension of the initial version developed by Susan-Resiga et al [1], to include the contributions of non-negligible radial velocity and of the variable rothalpy. Simple analytical expressions are derived for these additional data from three-dimensional numerical simulations of the Kaplan turbine. The final results, i.e. velocity components profiles, are validated against experimental data at two operating points, with the same Kaplan runner blades opening, but variable discharge.

Competing risk bias was common in Kaplan-Meier risk estimates published in prominent medical journals.

Science.gov (United States)

van Walraven, Carl; McAlister, Finlay A

2016-01-01

Risk estimates from Kaplan-Meier curves are well known to medical researchers, reviewers, and editors. In this study, we determined the proportion of Kaplan-Meier analyses published in prominent medical journals that are potentially biased because of competing events ("competing risk bias"). We randomly selected 100 studies that had at least one Kaplan-Meier analysis and were recently published in prominent medical journals. Susceptibility to competing risk bias was determined by examining the outcome and potential competing events. In susceptible studies, bias was quantified using a previously validated prediction model when the number of outcomes and competing events were given. Forty-six studies (46%) contained Kaplan-Meier analyses susceptible to competing risk bias. Sixteen studies (34.8%) susceptible to competing risk cited the number of outcomes and competing events; in six of these studies (6/16, 37.5%), the outcome risk from the Kaplan-Meier estimate (relative to the true risk) was biased upward by 10% or more. Almost half of Kaplan-Meier analyses published in medical journals are susceptible to competing risk bias and may overestimate event risk. This bias was found to be quantitatively important in a third of such studies. Copyright © 2016 Elsevier Inc. All rights reserved.

Kaplan turbine tip vortex cavitation - analysis and prevention

Science.gov (United States)

Motycak, L.; Skotak, A.; Kupcik, R.

2012-11-01

The work is focused on one type of Kaplan turbine runner cavitation - a tip vortex cavitation. For detailed description of the tip vortex, the CFD analysis is used. On the basis of this analysis it is possible to estimate the intensity of cavitating vortex core, danger of possible blade surface and runner chamber cavitation pitting. In the paper, the ways how to avoid the pitting effect of the tip vortex are described. In order to prevent the blade surface against pitting, the following possibilities as the change of geometry of the runner blade, dimension of tip clearance and finally the installation of the anti-cavitation lips are discussed. The knowledge of the shape and intensity of the tip vortex helps to design the anti-cavitation lips more sophistically. After all, the results of the model tests of the Kaplan runner with or without anti-cavitation lips and the results of the CFD analysis are compared.

Kaplan-Meier Survival Analysis Overestimates the Risk of Revision Arthroplasty: A Meta-analysis.

Science.gov (United States)

Lacny, Sarah; Wilson, Todd; Clement, Fiona; Roberts, Derek J; Faris, Peter D; Ghali, William A; Marshall, Deborah A

2015-11-01

Although Kaplan-Meier survival analysis is commonly used to estimate the cumulative incidence of revision after joint arthroplasty, it theoretically overestimates the risk of revision in the presence of competing risks (such as death). Because the magnitude of overestimation is not well documented, the potential associated impact on clinical and policy decision-making remains unknown. We performed a meta-analysis to answer the following questions: (1) To what extent does the Kaplan-Meier method overestimate the cumulative incidence of revision after joint replacement compared with alternative competing-risks methods? (2) Is the extent of overestimation influenced by followup time or rate of competing risks? We searched Ovid MEDLINE, EMBASE, BIOSIS Previews, and Web of Science (1946, 1980, 1980, and 1899, respectively, to October 26, 2013) and included article bibliographies for studies comparing estimated cumulative incidence of revision after hip or knee arthroplasty obtained using both Kaplan-Meier and competing-risks methods. We excluded conference abstracts, unpublished studies, or studies using simulated data sets. Two reviewers independently extracted data and evaluated the quality of reporting of the included studies. Among 1160 abstracts identified, six studies were included in our meta-analysis. The principal reason for the steep attrition (1160 to six) was that the initial search was for studies in any clinical area that compared the cumulative incidence estimated using the Kaplan-Meier versus competing-risks methods for any event (not just the cumulative incidence of hip or knee revision); we did this to minimize the likelihood of missing any relevant studies. We calculated risk ratios (RRs) comparing the cumulative incidence estimated using the Kaplan-Meier method with the competing-risks method for each study and used DerSimonian and Laird random effects models to pool these RRs. Heterogeneity was explored using stratified meta-analyses and

77 FR 5990 - Special Conditions: Learjet Inc., Model LJ-200-1A10 Airplane, Pilot-Compartment View Through...

Science.gov (United States)

2012-02-07

..., and the FAA must issue a finding of regulatory adequacy pursuant to Sec. 611 of Public Law 92-574, the ``Noise Control Act of 1972.'' The FAA issues special conditions, as defined in 14 CFR 11.19, in... novel or unusual design features: The Model LJ-200-1A10 airplane flight deck design incorporates a...

Kaplan kõneles Iraagis rahust / Raivo Nikiforov ; interv. Eda Post

Index Scriptorium Estoniae

Nikiforov, Raivo

2005-01-01

Tapa väljaõppekeskuse kaplan leitnant Raivo Nikiforov käis Bagdadis Eesti rahuvalvajatele jõulujumalateenistust pidamas ning eestlaste elu jälgimas. Iraagi missioonist, rahuvalvajate elamistingimustest

Comparison of Exposure in the Kaplan Versus the Kocher Approach in the Treatment of Radial Head Fractures.

Science.gov (United States)

Barnes, Leslie Fink; Lombardi, Joseph; Gardner, Thomas R; Strauch, Robert J; Rosenwasser, Melvin P

2018-01-01

The aim of this study was to compare the complete visible surface area of the radial head, neck, and coronoid in the Kaplan and Kocher approaches to the lateral elbow. The hypothesis was that the Kaplan approach would afford greater visibility due to the differential anatomy of the intermuscular planes. Ten cadavers were dissected with the Kaplan and Kocher approaches, and the visible surface area was measured in situ using a 3-dimensional digitizer. Six measurements were taken for each approach by 2 surgeons, and the mean of these measurements were analyzed. The mean surface area visible with the lateral collateral ligament (LCL) preserved in the Kaplan approach was 616.6 mm 2 in comparison with the surface area of 136.2 mm 2 visible in the Kocher approach when the LCL was preserved. Using a 2-way analysis of variance, the difference between these 2 approaches was statistically significant. When the LCL complex was incised in the Kocher approach, the average visible surface area of the Kocher approach was 456.1 mm 2 and was statistically less than the Kaplan approach. The average surface area of the coronoid visible using a proximally extended Kaplan approach was 197.8 mm 2 . The Kaplan approach affords significantly greater visible surface area of the proximal radius than the Kocher approach.

Understanding survival analysis: Kaplan-Meier estimate.

Science.gov (United States)

Goel, Manish Kumar; Khanna, Pardeep; Kishore, Jugal

2010-10-01

Kaplan-Meier estimate is one of the best options to be used to measure the fraction of subjects living for a certain amount of time after treatment. In clinical trials or community trials, the effect of an intervention is assessed by measuring the number of subjects survived or saved after that intervention over a period of time. The time starting from a defined point to the occurrence of a given event, for example death is called as survival time and the analysis of group data as survival analysis. This can be affected by subjects under study that are uncooperative and refused to be remained in the study or when some of the subjects may not experience the event or death before the end of the study, although they would have experienced or died if observation continued, or we lose touch with them midway in the study. We label these situations as censored observations. The Kaplan-Meier estimate is the simplest way of computing the survival over time in spite of all these difficulties associated with subjects or situations. The survival curve can be created assuming various situations. It involves computing of probabilities of occurrence of event at a certain point of time and multiplying these successive probabilities by any earlier computed probabilities to get the final estimate. This can be calculated for two groups of subjects and also their statistical difference in the survivals. This can be used in Ayurveda research when they are comparing two drugs and looking for survival of subjects.

Verification of Kaplan turbine cam curves realization accuracy at power plant

Directory of Open Access Journals (Sweden)

Džepčeski Dane

2016-01-01

Full Text Available Sustainability of approximately constant value of Kaplan turbine efficiency, for relatively large net head changes, is a result of turbine runner variable geometry. Dependence of runner blades position change on guide vane opening represents the turbine cam curve. The cam curve realization accuracy is of great importance for the efficient and proper exploitation of turbines and consequently complete units. Due to the reasons mentioned above, special attention has been given to the tests designed for cam curves verification. The goal of this paper is to provide the description of the methodology and the results of the tests performed in the process of Kaplan turbine cam curves verification.

Modified Weighted Kaplan-Meier Estimator

Directory of Open Access Journals (Sweden)

Mohammad Shafiq

2007-01-01

Full Text Available In many medical studies majority of the study subjects do not reach to the event of interest during the study period. In such situations survival probabilities can be estimated for censored observation by Kaplan Meier estimator. However in case of heavy censoring these estimates are biased and over estimate the survival probabilities. For heavy censoring a new method was proposed (Bahrawar Jan, 2005 to estimate the survival probabilities by weighting the censored observations by non-censoring rate. But the main defect in this weighted method is that it gives zero weight to the last censored observation. To over come this difficulty a new weight is proposed which also gives a non-zero weight to the last censored observation.

The analysis of competing events like cause-specific mortality--beware of the Kaplan-Meier method

NARCIS (Netherlands)

Verduijn, Marion; Grootendorst, Diana C.; Dekker, Friedo W.; Jager, Kitty J.; le Cessie, Saskia

2011-01-01

Kaplan-Meier analysis is a popular method used for analysing time-to-event data. In case of competing event analyses such as that of cardiovascular and non-cardiovascular mortality, however, the Kaplan-Meier method profoundly overestimates the cumulative mortality probabilities for each of the

Individualism, Nationalism, and Universalism: The Educational Ideals of Mordecai M. Kaplan's Philosophy of Jewish Education

Science.gov (United States)

Ackerman, Ari

2008-01-01

This article will examine educational ideals by exploring the relation between the individual, the collective, and humanity in Kaplan's Jewish and educational philosophy. Generally the goals of individualism, nationalism, and universalism are seen as mutually exclusive. By contrast, Kaplan argues for the symbiotic relationship between…

Kaplan turbine tip vortex cavitation – analysis and prevention

International Nuclear Information System (INIS)

Motycak, L; Skotak, A; Kupcik, R

2012-01-01

The work is focused on one type of Kaplan turbine runner cavitation – a tip vortex cavitation. For detailed description of the tip vortex, the CFD analysis is used. On the basis of this analysis it is possible to estimate the intensity of cavitating vortex core, danger of possible blade surface and runner chamber cavitation pitting. In the paper, the ways how to avoid the pitting effect of the tip vortex are described. In order to prevent the blade surface against pitting, the following possibilities as the change of geometry of the runner blade, dimension of tip clearance and finally the installation of the anti-cavitation lips are discussed. The knowledge of the shape and intensity of the tip vortex helps to design the anti-cavitation lips more sophistically. After all, the results of the model tests of the Kaplan runner with or without anti-cavitation lips and the results of the CFD analysis are compared.

Numerical investigation of hub clearance flow in a Kaplan turbine

Science.gov (United States)

Wu, H.; Feng, J. J.; Wu, G. K.; Luo, X. Q.

2012-11-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

Numerical investigation of hub clearance flow in a Kaplan turbine

International Nuclear Information System (INIS)

Wu, H; Feng, J J; Wu, G K; Luo, X Q

2012-01-01

In this paper, the flow field considering the hub clearance flow in a Kaplan turbine has been investigated through using the commercial CFD code ANSYS CFX based on high-quality structured grids generated by ANSYS ICEM CFD. The turbulence is simulated by k-ω based shear stress transport (SST) turbulence model together with automatic near wall treatments. Four kinds of simulations have been conducted for the runner geometry without hub clearance, with only the hub front clearance, with only the rear hub clearance, and with both front and rear clearance. The analysis of the obtained results is focused on the flow structure of the hub clearance flow, the effect on the turbine performance including hydraulic efficiency and cavitation performance, which can improve the understanding on the flow field in a Kaplan turbine.

De 'wraak van de geografie' volgens Robert D. Kaplan

NARCIS (Netherlands)

Mamadouh, V.

2013-01-01

De Amerikaanse publicist Robert D. Kaplan heeft een nieuwe bestseller, De wraak van de geografie, waarin hij het belang van geografie voor de internationale politiek uit de doeken doet. Zijn roep om meer aandacht voor geografie is echter erg eenzijdig en een miskenning van alles waar ons vak voor

Unsteady load on an oscillating Kaplan turbine runner

Science.gov (United States)

Puolakka, O.; Keto-Tokoi, J.; Matusiak, J.

2013-02-01

A Kaplan turbine runner oscillating in turbine waterways is subjected to a varying hydrodynamic load. Numerical simulation of the related unsteady flow is time-consuming and research is very limited. In this study, a simplified method based on unsteady airfoil theory is presented for evaluation of the unsteady load for vibration analyses of the turbine shaft line. The runner is assumed to oscillate as a rigid body in spin and axial heave, and the reaction force is resolved into added masses and dampings. The method is applied on three Kaplan runners at nominal operating conditions. Estimates for added masses and dampings are considered to be of a magnitude significant for shaft line vibration. Moderate variation in the added masses and minor variation in the added dampings is found in the frequency range of interest. Reference results for added masses are derived by solving the boundary value problem for small motions of inviscid fluid using the finite element method. Good correspondence is found in the added mass estimates of the two methods. The unsteady airfoil method is considered accurate enough for design purposes. Experimental results are needed for validation of unsteady load analyses.

Symmetric-Galerkin BEM simulation of fracture with frictional contact

CSIR Research Space (South Africa)

Phan, AV

2003-06-14

Full Text Available FOR NUMERICAL METHODS IN ENGINEERING Int. J. Numer. Meth. Engng 2003; 57:835?851 (DOI: 10.1002/nme.707) Symmetric-Galerkin BEM simulation of fracture with frictional contact A.-V. Phan1;asteriskmath;?, J. A. L. Napier2, L. J. Gray3 and T. Kaplan3 1Department... Methods in Engineering 1975; 9:495?507. 35. Barsoum RS. On the use of isoparametric FFnite elements in linear fracture mechanics. International Journal for Numerical Methods in Engineering 1976; 10:25?37. 36. Gray LJ, Phan A-V, Paulino GH, Kaplan T...

Influence of Working Environment on Fatigue Life Time Duration for Runner Blades of Kaplan Turbines

Directory of Open Access Journals (Sweden)

Ana-Maria Budai

2010-10-01

Full Text Available The paper present an analytical analyzes refer to influence of working environment on life time duration in service of runner blades of Kaplan turbines. The study are made using only analytical method, the entry dates being obtained from measurements made in situ for a Kaplan turbine. To calculate the maximum number of stress cycles whereupon the runner blades work without any damage it was used an analytical relation known in specialized literatures under the name of Morrow’s relation. To estimate fatigue life time duration will be used a formula obtained from one of most common cumulative damage methodology taking in consideration the real exploitation conditions of a specified Kaplan turbine.

Research on the cavitation characteristic of Kaplan turbine under sediment flow condition

International Nuclear Information System (INIS)

Weili, L; Jinling, L; Xingqi, L; Yuan, L

2010-01-01

The sediment concentration in many rivers in our world is very high, and the Kaplan turbine running in these rivers are usually seriously abraded. Since the existence of sand, the probability of cavitation is greatly enhanced. Under the joint action and mutual promotion of cavitation and sand erosion, serious abrasion could be made, the hydraulic performance of the Kaplan turbine may be descended, and the safety and stability of turbine are greatly threatened. Therefore, it is very important and significant to investigate the cavitation characteristic of Kaplan turbine under sediment flow condition. In this paper, numerical simulation of cavitation characteristic in pure water and solid-liquid two-phase flow in Kaplan turbine was performed. The solid-liquid two-fluid model were adopted in the numerical simulation, and the pressure, velocity and particle concentration distributive regularity on turbine blade surface under different diameter and concentration was revealed. Particle trajectory model was used to investigate the region and degree of runner blade abrasion in different conditions. The results showed that serious sand abrasion could be found near the blade head and outlet in large flow rate working condition. Relatively slight abrasion may be found near blade flange in small flow rate working condition. The more the sediment concentration and the large the sand diameter, the serious the runner is abraded, and the greater the efficiency is decreased. further analysis of the combined effects of wear and abrasion was performed. The result shows that the cavitation in silt flow is more serious than in pure water. The runner cavitation performance become worse under high sand concentration and large particle diameter, and the efficiency decrease greatly with the increase of sediment concentration.

Research on the cavitation characteristic of Kaplan turbine under sediment flow condition

Energy Technology Data Exchange (ETDEWEB)

Weili, L; Jinling, L; Xingqi, L; Yuan, L, E-mail: liaoweili2004@163.co [Institute of Water Resources and Hydro-Electric Engineering, Xi' an University of Technology No.5 South Jinhua Road, Xi' an, Shaanxi, 710048 (China)

2010-08-15

The sediment concentration in many rivers in our world is very high, and the Kaplan turbine running in these rivers are usually seriously abraded. Since the existence of sand, the probability of cavitation is greatly enhanced. Under the joint action and mutual promotion of cavitation and sand erosion, serious abrasion could be made, the hydraulic performance of the Kaplan turbine may be descended, and the safety and stability of turbine are greatly threatened. Therefore, it is very important and significant to investigate the cavitation characteristic of Kaplan turbine under sediment flow condition. In this paper, numerical simulation of cavitation characteristic in pure water and solid-liquid two-phase flow in Kaplan turbine was performed. The solid-liquid two-fluid model were adopted in the numerical simulation, and the pressure, velocity and particle concentration distributive regularity on turbine blade surface under different diameter and concentration was revealed. Particle trajectory model was used to investigate the region and degree of runner blade abrasion in different conditions. The results showed that serious sand abrasion could be found near the blade head and outlet in large flow rate working condition. Relatively slight abrasion may be found near blade flange in small flow rate working condition. The more the sediment concentration and the large the sand diameter, the serious the runner is abraded, and the greater the efficiency is decreased. further analysis of the combined effects of wear and abrasion was performed. The result shows that the cavitation in silt flow is more serious than in pure water. The runner cavitation performance become worse under high sand concentration and large particle diameter, and the efficiency decrease greatly with the increase of sediment concentration.

Research on the cavitation characteristic of Kaplan turbine under sediment flow condition

Science.gov (United States)

Weili, L.; Jinling, L.; Xingqi, L.; Yuan, L.

2010-08-01

The sediment concentration in many rivers in our world is very high, and the Kaplan turbine running in these rivers are usually seriously abraded. Since the existence of sand, the probability of cavitation is greatly enhanced. Under the joint action and mutual promotion of cavitation and sand erosion, serious abrasion could be made, the hydraulic performance of the Kaplan turbine may be descended, and the safety and stability of turbine are greatly threatened. Therefore, it is very important and significant to investigate the cavitation characteristic of Kaplan turbine under sediment flow condition. In this paper, numerical simulation of cavitation characteristic in pure water and solid-liquid two-phase flow in Kaplan turbine was performed. The solid-liquid two-fluid model were adopted in the numerical simulation, and the pressure, velocity and particle concentration distributive regularity on turbine blade surface under different diameter and concentration was revealed. Particle trajectory model was used to investigate the region and degree of runner blade abrasion in different conditions. The results showed that serious sand abrasion could be found near the blade head and outlet in large flow rate working condition. Relatively slight abrasion may be found near blade flange in small flow rate working condition. The more the sediment concentration and the large the sand diameter, the serious the runner is abraded, and the greater the efficiency is decreased. further analysis of the combined effects of wear and abrasion was performed. The result shows that the cavitation in silt flow is more serious than in pure water. The runner cavitation performance become worse under high sand concentration and large particle diameter, and the efficiency decrease greatly with the increase of sediment concentration.

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

International Nuclear Information System (INIS)

Ko, P; Kurosawa, S

2014-01-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine

Numerical simulation of turbulence flow in a Kaplan turbine -Evaluation on turbine performance prediction accuracy-

Science.gov (United States)

Ko, P.; Kurosawa, S.

2014-03-01

The understanding and accurate prediction of the flow behaviour related to cavitation and pressure fluctuation in a Kaplan turbine are important to the design work enhancing the turbine performance including the elongation of the operation life span and the improvement of turbine efficiency. In this paper, high accuracy turbine and cavitation performance prediction method based on entire flow passage for a Kaplan turbine is presented and evaluated. Two-phase flow field is predicted by solving Reynolds-Averaged Navier-Stokes equations expressed by volume of fluid method tracking the free surface and combined with Reynolds Stress model. The growth and collapse of cavitation bubbles are modelled by the modified Rayleigh-Plesset equation. The prediction accuracy is evaluated by comparing with the model test results of Ns 400 Kaplan model turbine. As a result that the experimentally measured data including turbine efficiency, cavitation performance, and pressure fluctuation are accurately predicted. Furthermore, the cavitation occurrence on the runner blade surface and the influence to the hydraulic loss of the flow passage are discussed. Evaluated prediction method for the turbine flow and performance is introduced to facilitate the future design and research works on Kaplan type turbine.

Computer Aided Design of the Link-Fork Head-Piston Assembly of the Kaplan Turbine with Solidworks

Directory of Open Access Journals (Sweden)

Camelia Jianu

2010-10-01

Full Text Available The paper presents the steps for 3D computer aided design (CAD of the link-fork head-piston assembly of the Kaplan turbine made in SolidWorks.The present paper is a tutorial for a Kaplan turbine assembly 3D geometry, which is dedicated to the Assembly design and Drawing Geometry and Drawing Annotation.

Anterolateral Knee Extra-articular Stabilizers: A Robotic Sectioning Study of the Anterolateral Ligament and Distal Iliotibial Band Kaplan Fibers.

Science.gov (United States)

Geeslin, Andrew G; Chahla, Jorge; Moatshe, Gilbert; Muckenhirn, Kyle J; Kruckeberg, Bradley M; Brady, Alex W; Coggins, Ashley; Dornan, Grant J; Getgood, Alan M; Godin, Jonathan A; LaPrade, Robert F

2018-05-01

The individual kinematic roles of the anterolateral ligament (ALL) and the distal iliotibial band Kaplan fibers in the setting of anterior cruciate ligament (ACL) deficiency require further clarification. This will improve understanding of their potential contribution to residual anterolateral rotational laxity after ACL reconstruction and may influence selection of an anterolateral extra-articular reconstruction technique, which is currently a matter of debate. Hypothesis/Purpose: To compare the role of the ALL and the Kaplan fibers in stabilizing the knee against tibial internal rotation, anterior tibial translation, and the pivot shift in ACL-deficient knees. We hypothesized that the Kaplan fibers would provide greater tibial internal rotation restraint than the ALL in ACL-deficient knees and that both structures would provide restraint against internal rotation during a simulated pivot-shift test. Controlled laboratory study. Ten paired fresh-frozen cadaveric knees (n = 20) were used to investigate the effect of sectioning the ALL and the Kaplan fibers in ACL-deficient knees with a 6 degrees of freedom robotic testing system. After ACL sectioning, sectioning was randomly performed for the ALL and the Kaplan fibers. An established robotic testing protocol was utilized to assess knee kinematics when the specimens were subjected to a 5-N·m internal rotation torque (0°-90° at 15° increments), a simulated pivot shift with 10-N·m valgus and 5-N·m internal rotation torque (15° and 30°), and an 88-N anterior tibial load (30° and 90°). Sectioning of the ACL led to significantly increased tibial internal rotation (from 0° to 90°) and anterior tibial translation (30° and 90°) as compared with the intact state. Significantly increased internal rotation occurred with further sectioning of the ALL (15°-90°) and Kaplan fibers (15°, 60°-90°). At higher flexion angles (60°-90°), sectioning the Kaplan fibers led to significantly greater internal rotation

Kaplan-Meier survival analysis overestimates cumulative incidence of health-related events in competing risk settings: a meta-analysis.

Science.gov (United States)

Lacny, Sarah; Wilson, Todd; Clement, Fiona; Roberts, Derek J; Faris, Peter; Ghali, William A; Marshall, Deborah A

2018-01-01

Kaplan-Meier survival analysis overestimates cumulative incidence in competing risks (CRs) settings. The extent of overestimation (or its clinical significance) has been questioned, and CRs methods are infrequently used. This meta-analysis compares the Kaplan-Meier method to the cumulative incidence function (CIF), a CRs method. We searched MEDLINE, EMBASE, BIOSIS Previews, Web of Science (1992-2016), and article bibliographies for studies estimating cumulative incidence using the Kaplan-Meier method and CIF. For studies with sufficient data, we calculated pooled risk ratios (RRs) comparing Kaplan-Meier and CIF estimates using DerSimonian and Laird random effects models. We performed stratified meta-analyses by clinical area, rate of CRs (CRs/events of interest), and follow-up time. Of 2,192 identified abstracts, we included 77 studies in the systematic review and meta-analyzed 55. The pooled RR demonstrated the Kaplan-Meier estimate was 1.41 [95% confidence interval (CI): 1.36, 1.47] times higher than the CIF. Overestimation was highest among studies with high rates of CRs [RR = 2.36 (95% CI: 1.79, 3.12)], studies related to hepatology [RR = 2.60 (95% CI: 2.12, 3.19)], and obstetrics and gynecology [RR = 1.84 (95% CI: 1.52, 2.23)]. The Kaplan-Meier method overestimated the cumulative incidence across 10 clinical areas. Using CRs methods will ensure accurate results inform clinical and policy decisions. Copyright © 2017 Elsevier Inc. All rights reserved.

Can a polynomial interpolation improve on the Kaplan-Yorke dimension?

International Nuclear Information System (INIS)

Richter, Hendrik

2008-01-01

The Kaplan-Yorke dimension can be derived using a linear interpolation between an h-dimensional Lyapunov exponent λ (h) >0 and an h+1-dimensional Lyapunov exponent λ (h+1) <0. In this Letter, we use a polynomial interpolation to obtain generalized Lyapunov dimensions and study the relationships among them for higher-dimensional systems

Adding gauge fields to Kaplan's fermions

International Nuclear Information System (INIS)

Blum, T.; Kaerkkaeinen, L.

1994-01-01

We experiment with adding dynamical gauge field to Kaplan (defect) fermions. In the case of U(1) gauge theory we use an inhomogeneous Higgs mechanism to restrict the 3d gauge dynamics to a planar 2d defect. In our simulations the 3d theory produce the correct 2d gauge dynamics. We measure fermion propagators with dynamical gauge fields. They posses the correct chiral structure. The fermions at the boundary of the support of the gauge field (waveguide) are non-chiral, and have a mass two times heavier than the chiral modes. Moreover, these modes cannot be excited by a source at the defect; implying that they are dynamically decoupled. We have also checked that the anomaly relation is fullfilled for the case of a smooth external gauge field. (orig.)

Numerical and in-situ investigations of water hammer effects in Drava river Kaplan turbine hydropower plants

International Nuclear Information System (INIS)

Bergant, A; Gregorc, B; Gale, J

2012-01-01

This paper deals with critical flow regimes that may induce unacceptable water hammer in Kaplan turbine hydropower plants. Water hammer analysis should be performed for normal, emergency and catastrophic operating conditions. Hydropower plants with Kaplan turbines are usually comprised of relatively short inlet and outlet conduits. The rigid water hammer theory can be used for this case. For hydropower plants with long penstocks the elastic water hammer should be used. Some Kaplan turbine units are installed in systems with long open channels. In this case, water level oscillations in the channels should be carefully investigated. Computational results are compared with results of measurements in recently rehabilitated seven Drava river hydroelectric power plants in Slovenia. Water hammer in the six power plants is controlled by appropriate adjustment of the wicket gates and runner blades closing/opening manoeuvres. Due to very long inflow and outflow open channels in Zlatolicje HPP a special vaned pressure regulating device attenuates extreme pressures in Kaplan turbine flow-passage system and controls unsteady flow in both open channels. Comparisons of results include normal operating regimes. The agreement between computed and measured results is reasonable.

Numerical and in-situ investigations of water hammer effects in Drava river Kaplan turbine hydropower plants

Science.gov (United States)

Bergant, A.; Gregorc, B.; Gale, J.

2012-11-01

This paper deals with critical flow regimes that may induce unacceptable water hammer in Kaplan turbine hydropower plants. Water hammer analysis should be performed for normal, emergency and catastrophic operating conditions. Hydropower plants with Kaplan turbines are usually comprised of relatively short inlet and outlet conduits. The rigid water hammer theory can be used for this case. For hydropower plants with long penstocks the elastic water hammer should be used. Some Kaplan turbine units are installed in systems with long open channels. In this case, water level oscillations in the channels should be carefully investigated. Computational results are compared with results of measurements in recently rehabilitated seven Drava river hydroelectric power plants in Slovenia. Water hammer in the six power plants is controlled by appropriate adjustment of the wicket gates and runner blades closing/opening manoeuvres. Due to very long inflow and outflow open channels in Zlatoličje HPP a special vaned pressure regulating device attenuates extreme pressures in Kaplan turbine flow-passage system and controls unsteady flow in both open channels. Comparisons of results include normal operating regimes. The agreement between computed and measured results is reasonable.

XRF and XANES Data for Kaplan U Paper

Science.gov (United States)

The dataset contains two XRF images of iron and uranium distribution on plant roots and a database of XANES data used to produce XANES spectra figure for Figure 7 in the published paper.This dataset is associated with the following publication:Kaplan, D., R. Kukkadapu, J. Seaman, B. Arey, A. Dohnalkova, S. Buettner, D. Li, T. Varga, K. Scheckel, and P. Jaffe. Iron Mineralogy and Uranium-Binding Environment in the Rhizosphere of a Wetland Soil. D. Barcelo SCIENCE OF THE TOTAL ENVIRONMENT. Elsevier BV, AMSTERDAM, NETHERLANDS, 569: 53-64, (2016).

Fatigue Analysis of an Outer Bearing Bush of a Kaplan Turbine

Directory of Open Access Journals (Sweden)

Doina Frunzaverde

2011-01-01

Full Text Available The paper presents the fatigue analysis of an outer bearing bush of aKaplan turbine. This outer bush, together with an inner one, bear thepin lever - trunion - blade subassembly of the runner blade operatingmechanism. For modeling and simulation, SolidWorks software is used.

Perturbative analysis for Kaplan's lattice chiral fermions

International Nuclear Information System (INIS)

Aoki, S.; Hirose, H.

1994-01-01

Perturbation theory for lattice fermions with domain wall mass terms is developed and is applied to investigate the chiral Schwinger model formulated on the lattice by Kaplan's method. We calculate the effective action for gauge fields to one loop, and find that it contains a longitudinal component even for anomaly-free cases. From the effective action we obtain gauge anomalies and Chern-Simons currents without ambiguity. We also show that the current corresponding to the fermion number has a nonzero divergence and it flows off the wall into the extra dimension. Similar results are obtained for a proposal by Shamir, who used a constant mass term with free boundaries instead of domain walls

A cyclostationary multi-domain analysis of fluid instability in Kaplan turbines

Science.gov (United States)

Pennacchi, P.; Borghesani, P.; Chatterton, S.

2015-08-01

Hydraulic instabilities represent a critical problem for Francis and Kaplan turbines, reducing their useful life due to increase of fatigue on the components and cavitation phenomena. Whereas an exhaustive list of publications on computational fluid-dynamic models of hydraulic instability is available, the possibility of applying diagnostic techniques based on vibration measurements has not been investigated sufficiently, also because the appropriate sensors seldom equip hydro turbine units. The aim of this study is to fill this knowledge gap and to exploit fully, for this purpose, the potentiality of combining cyclostationary analysis tools, able to describe complex dynamics such as those of fluid-structure interactions, with order tracking procedures, allowing domain transformations and consequently the separation of synchronous and non-synchronous components. This paper will focus on experimental data obtained on a full-scale Kaplan turbine unit, operating in a real power plant, tackling the issues of adapting such diagnostic tools for the analysis of hydraulic instabilities and proposing techniques and methodologies for a highly automated condition monitoring system.

Large mass limit of the continuum theories in Kaplan's formulation

International Nuclear Information System (INIS)

Kawano, T.; Kikukawa, Y.

1994-01-01

Being inspired by Kaplan's proposal for simulating chiral fermions on a lattice, we examine the continuum analogue of his domain-wall construction for two-dimensional chiral Schwinger models. Adopting a slightly unusual dimensional regularization, we explicitly evaluate the one-loop effective action in the limit that the domain-wall mass goes to infinity. For anomaly-free cases, the effective action turns out to be gauge invariant in the two-dimensional sense

Air injection test on a Kaplan turbine: prototype - model comparison

Science.gov (United States)

Angulo, M.; Rivetti, A.; Díaz, L.; Liscia, S.

2016-11-01

Air injection is a very well-known resource to reduce pressure pulsation magnitude in turbines, especially on Francis type. In the case of large Kaplan designs, even when not so usual, it could be a solution to mitigate vibrations arising when tip vortex cavitation phenomenon becomes erosive and induces structural vibrations. In order to study this alternative, aeration tests were performed on a Kaplan turbine at model and prototype scales. The research was focused on efficiency of different air flow rates injected in reducing vibrations, especially at the draft tube and the discharge ring and also in the efficiency drop magnitude. It was found that results on both scales presents the same trend in particular for vibration levels at the discharge ring. The efficiency drop was overestimated on model tests while on prototype were less than 0.2 % for all power output. On prototype, air has a beneficial effect in reducing pressure fluctuations up to 0.2 ‰ of air flow rate. On model high speed image computing helped to quantify the volume of tip vortex cavitation that is strongly correlated with the vibration level. The hydrophone measurements did not capture the cavitation intensity when air is injected, however on prototype, it was detected by a sonometer installed at the draft tube access gallery.

Repair of a Kaplan blade sealing surface without dismantling the turbine; Instandsetzung einer Kaplanschaufel-Dichtflaeche ohne Turbinendemontage

Energy Technology Data Exchange (ETDEWEB)

Drygas, A.; Bauer, K. [E.ON Wasserkraft GmbH, Landshut (Germany)

2008-07-01

In spite of aiming at minimum maintenance costs, runners of Kaplan turbines need to be kept in good repair. Besides preserving their main function as an energy converter, ecological reasons have to be considered as well. The latter aspect accounts for fully functional, safe seals of the pivot-mounted Kaplan runner blades. Advanced wear of the sealing surfaces may require mechanical processing, which formerly called for a costly dismantling of the runner. A newly developed and patented processing device now allows for machining the worn out sealing surfaces without dismantling the runner, thus reducing costs considerably. The device was first successfully applied to a Kaplan turbine runner with a diameter of 5.35 m. The device, so far designed for grinding, will be enhanced for lathing, in order to obtain a process even more efficient when combining lathing and grinding. (orig.)

Analysis of two potential long-distance signaling molecules, LjCLE-RS1/2 and jasmonic acid, in a hypernodulating mutant too much love.

Science.gov (United States)

Magori, Shimpei; Kawaguchi, Masayoshi

2010-04-01

Legume plants tightly control the number and development of root nodules. This is partly regulated by a long-distance signaling known as auto-regulation of nodulation (AON). AON signaling involves at least two potential long-distance signals: root-derived signal and shoot-derived signal. However, their molecular characteristics and the mode of action remain unclear. In our recent study, we isolated a novel Lotus japonicus hypernodulating mutant too much love (tml). Based on several grafting experiments, we concluded that its causative gene TML functions as a receptor of the shoot-derived signal. This finding prompted us to ask how the candidates of the long-distance signal molecules, LjCLE-RS1/2 and jasmonic acid (JA), are affected in tml mutants. Expression analysis revealed that rapid induction of LjCLE-RS1/2 upon rhizobial inoculation is still intact in tml, supporting that TML plays a role in reception of the shoot-derived signal but not in generation of the root-derived signal. Furthermore, physiological analysis showed that JA, a candidate of the shoot-derived signal, can suppress tml hypernodulation. Therefore, contrary to the previous report, JA might not be a component of AON signaling.

Going Large or Going Small in Plant Design: Comparison between a P.P. with three small Kaplan turbines and a P.P. with just one Large Kaplan turbine

Science.gov (United States)

Castro-Otero, C.

2017-04-01

Very often small turbine manufacturers are requested to produce sizeable turbines, too large in terms of physical dimensions, power or designing capacity. In these cases clever alternative solutions should be found to meet customers’ needs. For instance: in the old times twin runner Francis turbines were an option instead of one large machine, or if a too large Pelton turbine cannot be manufactured or designed, a good option is to install a medium size Francis and a small Pelton. Likewise, a similar approach needs to be taken should the manufacturer be asked for a too large Kaplan. Facing this situation a good option is to install three or more small Kaplan turbines. This particular case was studied in depth and after all the considerations had been made, the following question arouse: Is this a way out for the manufacturer or is it really the best option for the customer? The choice made as a way out for the manufacturer became the best option for the customer and a success for both parties. This paper aims to encourage developers and engineering firms to search for more options than the traditional one to find the best option in plant design.

Numerical investigation of tip clearance cavitation in Kaplan runners

Science.gov (United States)

Nikiforova, K.; Semenov, G.; Kuznetsov, I.; Spiridonov, E.

2016-11-01

There is a gap between the Kaplan runner blade and the shroud that makes for a special kind of cavitation: cavitation in the tip leakage flow. Two types of cavitation caused by the presence of clearance gap are known: tip vortex cavitation that appears at the core of the rolled up vortex on the blade suction side and tip clearance cavitation that appears precisely in the gap between the blade tip edge and the shroud. In the context of this work numerical investigation of the model Kaplan runner has been performed taking into account variable tip clearance for several cavitation regimes. The focus is put on investigation of structure and origination of mechanism of cavitation in the tip leakage flow. Calculations have been performed with the help of 3-D unsteady numerical model for two-phase medium. Modeling of turbulent flow in this work has been carried out using full equations of Navier-Stokes averaged by Reynolds with correction for streamline curvature and system rotation. For description of this medium (liquid-vapor) simplification of Euler approach is used; it is based on the model of interpenetrating continuums, within the bounds of this two- phase medium considered as a quasi-homogeneous mixture with the common velocity field and continuous distribution of density for both phases. As a result, engineering techniques for calculation of cavitation conditioned by existence of tip clearance in model turbine runner have been developed. The detailed visualization of the flow was carried out and vortex structure on the suction side of the blade was reproduced. The range of frequency with maximum value of pulsation was assigned and maximum energy frequency was defined; it is based on spectral analysis of the obtained data. Comparison between numerical computation results and experimental data has been also performed. The location of cavitation zone has a good agreement with experiment for all analyzed regimes.

Results of the radiological survey at 105 Garibaldi Avenue, Lodi, New Jersey (LJ065)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 105 Garibaldi Avenue, Lodi, New Jersey (LJ065), was conducted during 1987. 4 refs., 4 figs., 3 tabs

Results of the radiological survey at 104 Avenue E, Lodi, New Jersey (LJ086)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-12-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 104 Avenue E, Lodi, New Jersey (LJ086), was conducted during 1988. 5 refs., 2 figs., 3 tabs

Results of the radiological survey at 15 John Street, Lodi, New Jersey (LJ087)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-12-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 15 John Street, Lodi, New Jersey (LJ087), was conducted during 1988. 5 refs., 3 figs., 3 tabs

Results of the radiological survey at 3 Branca Court, Lodi, New Jersey (LJ038)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 3 Branca Court, Lodi, New Jersey (LJ038), was conducted during 1985 and 1986. 4 refs., 4 figs., 3 tabs

Results of the radiological survey at 112 Columbia Lane, Lodi, New Jersey (LJ068)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 112 Columbia Lane, Lodi, New Jersey (LJ068), was conducted during 1987. 4 refs., 6 figs., 3 tabs

The Educational Philosophies of Mordecai Kaplan and Michael Rosenak: Surprising Similarities and Illuminating Differences

Science.gov (United States)

Schein, Jeffrey; Caplan, Eric

2014-01-01

The thoughts of Mordecai Kaplan and Michael Rosenak present surprising commonalities as well as illuminating differences. Similarities include the perception that Judaism and Jewish education are in crisis, the belief that Jewish peoplehood must include commitment to meaningful content, the need for teachers to teach from a position of…

Properties of water along the liquid-vapor coexistence curve via molecular dynamics simulations using the polarizable TIP4P-QDP-LJ water model.

Science.gov (United States)

Bauer, Brad A; Patel, Sandeep

2009-08-28

We present an extension of the TIP4P-QDP model, TIP4P-QDP-LJ, that is designed to couple changes in repulsive and dispersive nonbond interactions to changes in polarizability. Polarizability is intimately related to the dispersion component of classical force field models of interactions, and we explore the effect of incorporating this connection explicitly on properties along the liquid-vapor coexistence curve of pure water. Parametrized to reproduce condensed-phase liquid water properties at 298 K, the TIP4P-QDP-LJ model predicts density, enthalpy of vaporization, self-diffusion constant, and the dielectric constant at ambient conditions to about the same accuracy as TIP4P-QDP but shows remarkable improvement in reproducing the liquid-vapor coexistence curve. TIP4P-QDP-LJ predicts critical constants of T(c)=623 K, rho(c)=0.351 g/cm(3), and P(c)=250.9 atm, which are in good agreement with experimental values of T(c)=647.1 K, rho(c)=0.322 g/cm(3), and P(c)=218 atm, respectively. Applying a scaling factor correction (obtained by fitting the experimental vapor-liquid equilibrium data to the law of rectilinear diameters using a three-term Wegner expansion) the model predicts critical constants (T(c)=631 K and rho(c)=0.308 g/cm(3)). Dependence of enthalpy of vaporization, self-diffusion constant, surface tension, and dielectric constant on temperature are shown to reproduce experimental trends. We also explore the interfacial potential drop across the liquid-vapor interface for the temperatures studied. The interfacial potential demonstrates little temperature dependence at lower temperatures (300-450 K) and significantly enhanced (exponential) dependence at elevated temperatures. Terms arising from the decomposition of the interfacial potential into dipole and quadrupole contributions are shown to monotonically approach zero as the temperature approaches the critical temperature. Results of this study suggest that self-consistently treating the coupling of phase

Results of the radiological survey at 14 Long Valley Road, Lodi, New Jersey (LJ070)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.

1989-12-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 14 Long Valley Road, Lodi New Jersey (LJ070), was conducted during 1987. Survey measurements indicate that the property contained radioactive contamination primarily from the 232 Th decay chain. The radionuclide distributions are typical of the type of material originating from processing operations at the MCW. 5 refs., 5 figs., 3 tabs

Results of the radiological survey at 48 Long Valley Road, Lodi, New Jersey (LJ085)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 48 Long Valley Road, Lodi, New Jersey (LJ085), was conducted during 1988. 5 refs., 6 figs., 3 tabs

Results of the radiological survey at 70 State Highway 46, Lodi, New Jersey (LJ094)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 70 State Highway 46, Lodi, New Jersey (LJ094), was conducted during 1988. 4 refs., 5 figs., 3 tabs

Comparative Study of Barotrauma Risk during Fish Passage through Kaplan Turbines

Energy Technology Data Exchange (ETDEWEB)

Richmond, Marshall C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Romero-Gomez, Pedro [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Serkowski, John A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Rakowski, Cynthia L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States). Hydrology Group; Graf, Michael J. [Voith Hydro, York, PA (United States)

2015-10-01

Rapid pressure changes in hydroelectric turbine flows can cause barotrauma that can be hazardous to the passage of fish, in particular migratory juvenile salmonids. Although numerous laboratory tests have evaluated the effect of rapid decompression in fish species of relevance, numerical modeling studies offer the advantage of predicting, for new turbine designs, the potential risks of mortality and injury from rapid pressure change during turbine passage. However, rapid pressure change is only one of several hydraulic risks encountered by fish during turbine passage in addition to blade strike, shear, and turbulence. To better understand the role of rapid pressure changes, the present work focuses on the application of a computational fluid dynamics based method for evaluating the risk of pressure-related mortality to fish passing through an early 1960s era original hydroelectric Kaplan turbine at Wanapum Dam (Columbia River, Washington), and a modern advanced Kaplan turbine installed in 2005. The results show that the modeling approach acceptably reproduced the nadir pressure distributions compared to field data previously collected at the site using an autonomous sensor. Our findings show that the new advanced-design unit performs better, in terms of reduced barotrauma risk to fish from exposure to low pressures, than the original turbine unit. The outcomes allow for comparative analyses of turbine designs and operations prior to installation, an advantage that can potentially be integrated in the process of designing new turbine units to achieve superior environmental performance. Overall, the results show that modern turbine designs can achieve the multiple objectives of increasing power generation, lowering cavitation potential, and reducing barotrauma risks to passing fish.

Crustal thermal state and origin of silicic magma in Iceland: the case of Torfajökull, Ljósufjöll and Snæfellsjökull volcanoes

Science.gov (United States)

Martin, E.; Sigmarsson, O.

2007-05-01

Pleistocene and Holocene peralkaline rhyolites from Torfajökull (South Iceland Volcanic Zone) and Ljósufjöll central volcanoes and trachytes from Snæfellsjökull (Snæfellsnes Volcanic Zone) allow the assessment of the mechanism for silicic magma genesis as a function of geographical location and crustal geothermal gradient. The low δ18O (2.4‰) and low Sr concentration (12.2 ppm) measured in Torfajökull rhyolites are best explained by partial melting of hydrated metabasaltic crust followed by major fractionation of feldspar. In contrast, very high 87Sr/86Sr (0.70473) and low Ba (8.7 ppm) and Sr (1.2 ppm) concentrations measured in Ljósufjöll silicic lavas are best explained by fractional crystallisation and subsequent 87Rb decay. Snæfellsjökull trachytes are also generated by fractional crystallisation, with less than 10% crustal assimilation, as inferred from their δ18O. The fact that silicic magmas within, or close to, the rift zone are principally generated by crustal melting whereas those from off-rift zones are better explained by fractional crystallisation clearly illustrates the controlling influence of the thermal state of the crust on silicic magma genesis in Iceland.

Unsteady numerical simulation of the flow in the U9 Kaplan turbine model

International Nuclear Information System (INIS)

Javadi, Ardalan; Nilsson, Håkan

2014-01-01

The Reynolds-averaged Navier-Stokes equations with the RNG k-ε turbulence model closure are utilized to simulate the unsteady turbulent flow throughout the whole flow passage of the U9 Kaplan turbine model. The U9 Kaplan turbine model comprises 20 stationary guide vanes and 6 rotating blades (696.3 RPM), working at best efficiency load (0.71 m 3 /s). The computations are conducted using a general finite volume method, using the OpenFOAM CFD code. A dynamic mesh is used together with a sliding GGI interface to include the effect of the rotating runner. The clearance is included in the guide vane. The hub and tip clearances are also included in the runner. An analysis is conducted of the unsteady behavior of the flow field, the pressure fluctuation in the draft tube, and the coherent structures of the flow. The tangential and axial velocity distributions at three sections in the draft tube are compared against LDV measurements. The numerical result is in reasonable agreement with the experimental data, and the important flow physics close to the hub in the draft tube is captured. The hub and tip vortices and an on-axis forced vortex are captured. The numerical results show that the frequency of the forced vortex in 1/5 of the runner rotation

Unsteady numerical simulation of the flow in the U9 Kaplan turbine model

Science.gov (United States)

Javadi, Ardalan; Nilsson, Håkan

2014-03-01

The Reynolds-averaged Navier-Stokes equations with the RNG k-ε turbulence model closure are utilized to simulate the unsteady turbulent flow throughout the whole flow passage of the U9 Kaplan turbine model. The U9 Kaplan turbine model comprises 20 stationary guide vanes and 6 rotating blades (696.3 RPM), working at best efficiency load (0.71 m3/s). The computations are conducted using a general finite volume method, using the OpenFOAM CFD code. A dynamic mesh is used together with a sliding GGI interface to include the effect of the rotating runner. The clearance is included in the guide vane. The hub and tip clearances are also included in the runner. An analysis is conducted of the unsteady behavior of the flow field, the pressure fluctuation in the draft tube, and the coherent structures of the flow. The tangential and axial velocity distributions at three sections in the draft tube are compared against LDV measurements. The numerical result is in reasonable agreement with the experimental data, and the important flow physics close to the hub in the draft tube is captured. The hub and tip vortices and an on-axis forced vortex are captured. The numerical results show that the frequency of the forced vortex in 1/5 of the runner rotation.

Results of the radiological survey at 6 Hancock Street, Lodi, New Jersey (LJ033)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth, earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 6 Hancock Street, Lodi, New Jersey (LJ033), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site

Results of the radiological survey at 6 Branca Court, Lodi, New Jersey (LJ041)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rate earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 6 Branca Court, Lodi, New Jersey (LJ041), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Act program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 6 figs., 3 tabs

Results of the radiological survey at 62 Trudy Drive, Lodi, New Jersey (LJ080)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 62 Trudy Drive, Lodi, New Jersey (LJ080), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 5 figs., 3 tabs

Results of the radiological survey at 174 Essex Street, Lodi, New Jersey (LJ073)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 174 Essex Street, Lodi, New Jersey (LJ073), was conducted during 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site

Results of the radiological survey at 160 Essex Street, Lodi, New Jersey (LJ072)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 160 Essex Street, Lodi, New Jersey (LJ072), was conducted during 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 10 figs., 2 tabs

Results of the radiological survey at 99 Garibaldi Avenue, Lodi, New Jersey (LJ064)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Crutcher, J.W.

1989-07-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 99 Garibaldi Avenue, Lodi, New Jersey (LJ064), was conducted during 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 8 figs., 3 tabs

Results of the radiological survey at 2 Branca Court, Lodi, New Jersey (LJ036)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1961 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 2 Branca Court, Lodi, New Jersey (LJ036), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site

Results of the radiological survey at 112 Avenue E, Lodi, New Jersey (LJ082)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residue, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 112 Avenue E, Lodi, New Jersey (LJ082), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 2 figs., 3 tabs

Results of the radiological survey at 108 Avenue E, Lodi, New Jersey (LJ084)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 108 Avenue E, Lodi, New Jersey (LJ084), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 2 figs., 2 tabs

Results of the radiological survey at 106 Columbia Lane, Lodi, New Jersey (LJ063)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Crutcher, J.W.

1989-07-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 106 Columbia Lane, Lodi, New Jersey (LJ063), was conducted during 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 7 figs., 3 tabs

Results of the radiological survey at 79 Avenue B, Lodi, New Jersey (LJ091)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 79 Avenue B, Lodi, New Jersey (LJ091), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 2 figs., 2 tabs

Results of the radiological survey at 113 Avenue E, Lodi, New Jersey (LJ081)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 113 Avenue E, Lodi, New Jersey (LJ081), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs, 2 figs., 3 tabs

Approaches to Learning or Levels of Processing: What Did Marton and Säljö (1976a) Really Say? the Legacy of the Work of the Göteborg Group in the 1970s

Science.gov (United States)

Richardson, John T.

2015-01-01

Marton and Säljö ("Br J Educ Psychol" 46:4-11, 1976a) described deep-level and surface-level processing in experiments in which students read and recalled academic texts. They did not discuss whether levels of processing had any counterparts in students' everyday studies. However, their article is often credited as the source of the…

Community Music during the New Deal: The Contributions of Willem Van de Wall and Max Kaplan

Science.gov (United States)

Krikun, Andrew

2010-01-01

Willem Van de Wall (1887-1953) and Max Kaplan (1911-98) built careers spanning music performance, music education, adult education, sociology, social work, music therapy and community music. Willem Van de Wall was a seminal influence on the development of the fields of music therapy and adult education--researching the role of music in…

Results of the radiological survey at 10 Hancock Street, Lodi, New Jersey (LJ031)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling from radionuclide analyses. The survey of this site, 10 Hancock Street, Lodi, New Jersey (LJ031), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 4 figs., 3 tabs

Results of the radiological survey at 7 Hancock Street, Lodi, New Jersey (LJ027)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-09-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. AT the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 7 Hancock Street, Lodi, New Jersey (LJ027), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 5 figs., 3 tabs

Results of the radiological survey at 19 Redstone Lane, Lodi, New Jersey (LJ056)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 19 Redstone Lane, Lodi, New Jersey (LJ056), was conducted during 1985 and 1986. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 4 figs., 3 tabs

Results of the radiological survey at 9 Hancock Street, Lodi, New Jersey (LJ028)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-09-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 9 Hancock Street, Lodi, New Jersey (LJ028), was conducted during 1985 and 1986. Some radionuclide measurements were greater than typical background levels in the northern New Jersey area. However, results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 6 figs., 3 tabs

Results of the radiological survey at 17 Redstone Lane, Lodi, New Jersey (LJ030)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 17 Redstone Lane, Lodi, New Jersey (LJ030), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 7 figs., 3 tabs

Results of the radiological survey at 205 Main Street, Lodi, New Jersey (LJ075)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.; Floyd, L.M.; Crutcher, J.W.

1989-08-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 205 Main Street, Lodi, New Jersey (LJ075), was conducted during 1987 and 1988. Results of the survey indicated radioactivity in the range of normal background for the northern New Jersey area. Radiological assessments of soil samples from the site demonstrate no radionuclide concentrations in excess of DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 21 figs., 3 tabs

Results of the radiological survey at 1 Branca Court, Lodi, New Jersey (LJ034)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 1 Branca Court, Lodi, New Jersey (LJ034), was conducted during 1985 and 1986. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 4 figs., 3 tabs

Results of the radiological survey at 7 Redstone Lane, Lodi, New Jersey (LJ044)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclides analyses. The survey of this site, 7 Redstone Lane, Lodi, New Jersey (LJ044), was conducted during 1985 and 1986. Some radionuclide measurements were greater than typical background levels in the northern New Jersey area. However, results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 4 figs., 3 tabs

Results of the radiological survey at 80 Industrial Road, Lodi, New Jersey (LJ061)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.; Floyd, L.M.; Crutcher, J.W.

1989-07-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 80 Industrial Road, Lodi, New Jersey (LJ061), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of DOE remedial action criteria, primarily from the 232 Th decay chain, with some contamination from 226 Ra. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 11 figs., 3 tabs

Results of the radiological survey at 12 Long Valley Road, Lodi, New Jersey (LJ054)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extracting process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 12 Long Valley Road, Lodi, New Jersey (LJ054), was conducted during 1985 and 1986. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area

Axial U(1) current in Grabowska and Kaplan's formulation

Science.gov (United States)

Hamada, Yu; Kawai, Hikaru

2017-06-01

Recently, Grabowska and Kaplan [Phys. Rev. Lett. 116, 211602 (2016); Phys. Rev. D 94, 114504 (2016)] suggested a nonperturbative formulation of a chiral gauge theory, which consists of the conventional domain-wall fermion and a gauge field that evolves by gradient flow from one domain wall to the other. We introduce two sets of domain-wall fermions belonging to complex conjugate representations so that the effective theory is a 4D vector-like gauge theory. Then, as a natural definition of the axial-vector current, we consider a current that generates simultaneous phase transformations for the massless modes in 4 dimensions. However, this current is exactly conserved and does not reproduce the correct anomaly. In order to investigate this point precisely, we consider the mechanism of the conservation. We find that this current includes not only the axial current on the domain wall but also a contribution from the bulk, which is nonlocal in the sense of 4D fields. Therefore, the local current is obtained by subtracting the bulk contribution from it.

Coupled skinny baker's maps and the Kaplan-Yorke conjecture

Science.gov (United States)

Gröger, Maik; Hunt, Brian R.

2013-09-01

The Kaplan-Yorke conjecture states that for ‘typical’ dynamical systems with a physical measure, the information dimension and the Lyapunov dimension coincide. We explore this conjecture in a neighborhood of a system for which the two dimensions do not coincide because the system consists of two uncoupled subsystems. We are interested in whether coupling ‘typically’ restores the equality of the dimensions. The particular subsystems we consider are skinny baker's maps, and we consider uni-directional coupling. For coupling in one of the possible directions, we prove that the dimensions coincide for a prevalent set of coupling functions, but for coupling in the other direction we show that the dimensions remain unequal for all coupling functions. We conjecture that the dimensions prevalently coincide for bi-directional coupling. On the other hand, we conjecture that the phenomenon we observe for a particular class of systems with uni-directional coupling, where the information and Lyapunov dimensions differ robustly, occurs more generally for many classes of uni-directionally coupled systems (also called skew-product systems) in higher dimensions.

The Factor Structure and Age-Related Factorial Invariance of the Delis-Kaplan Executive Function System (D-KEFS)

Science.gov (United States)

Latzman, Robert D.; Markon, Kristian E.

2010-01-01

There has been an increased interest in the structure of and relations among executive functions.The present study examined the factor structure as well as age-related factorial invariance of the Delis-Kaplan Executive Function System (D-KEFS), a widely used inventory aimed at assessing executive functions. Analyses were first conducted using data…

Pressure pulsation in Kaplan turbines: Prototype-CFD comparison

International Nuclear Information System (INIS)

Rivetti, A; Lucino, C; Liscia, S; Muguerza, D; Avellan, F

2012-01-01

Pressure pulsation phenomena in a large Kaplan turbine are investigated by means of numerical simulations (CFD) and prototype measurements in order to study the dynamic behavior of flow due to the blade passage and its interaction with other components of the turbine. Numerical simulations are performed with the commercial software Ansys CFX code, solving the incompressible Unsteady Reynolds-Averaged-Navier Stokes equations under a finite volume scheme. The computational domain involves the entire machine at prototype scale. Special care is taken in the discretization of the wicket gate overhang and runner blade gap. Prototype measurements are performed using pressure transducers at different locations among the wicket gate outlet and the draft tube inlet. Then, CFD results are compared with temporary signals of prototype measurements at identical locations to validate the numerical model. A detailed analysis was focused on the tip gap flow and the pressure field at the discharge ring. From a rotating reference frame perspective, it is found that the mean pressure fluctuates accordingly the wicket gate passage. Moreover, in prototype measurements the pressure frequency that reveals the presence of modulated cavitation at the discharge ring is distinguished, as also verified from the shape of erosion patches in concordance with the number of wicket gates.

Pressure pulsation in Kaplan turbines: Prototype-CFD comparison

Science.gov (United States)

Rivetti, A.; Lucino1, C.; Liscia, S.; Muguerza, D.; Avellan, F.

2012-11-01

Pressure pulsation phenomena in a large Kaplan turbine are investigated by means of numerical simulations (CFD) and prototype measurements in order to study the dynamic behavior of flow due to the blade passage and its interaction with other components of the turbine. Numerical simulations are performed with the commercial software Ansys CFX code, solving the incompressible Unsteady Reynolds-Averaged-Navier Stokes equations under a finite volume scheme. The computational domain involves the entire machine at prototype scale. Special care is taken in the discretization of the wicket gate overhang and runner blade gap. Prototype measurements are performed using pressure transducers at different locations among the wicket gate outlet and the draft tube inlet. Then, CFD results are compared with temporary signals of prototype measurements at identical locations to validate the numerical model. A detailed analysis was focused on the tip gap flow and the pressure field at the discharge ring. From a rotating reference frame perspective, it is found that the mean pressure fluctuates accordingly the wicket gate passage. Moreover, in prototype measurements the pressure frequency that reveals the presence of modulated cavitation at the discharge ring is distinguished, as also verified from the shape of erosion patches in concordance with the number of wicket gates.

Application of Kaplan-Meier analysis in reliability evaluation of products cast from aluminium alloys

OpenAIRE

J. Szymszal; A. Gierek; J. Kliś

2010-01-01

The article evaluates the reliability of AlSi17CuNiMg alloys using Kaplan-Meier-based technique, very popular as a survival estimation tool in medical science. The main object of survival analysis is a group (or groups) of units for which the time of occurrence of an event (failure) taking place after some time of waiting is estimated. For example, in medicine, the failure can be patient’s death. In this study, the failure was the specimen fracture during a periodical fatigue test, while the ...

Socialization into a Civilization: The Dewey-Kaplan Synthesis in American Jewish Schooling in the Early 20th Century

Science.gov (United States)

Jacobs, Benjamin M.

2009-01-01

This historical study focuses on how John Dewey's theory of education as socialization and Mordecai Kaplan's theory of Judaism as a civilization together served as an ideological base and pedagogical framework for the creation of "progressive," "reconstructed" American Jewish school programs in the early 20th century…

Immunostimulatory property of a synthetic peptide belonging to the soluble ATP diphosphohydro-lase isoform (SmATPDase 2 and immunolocalisation of this protein in the Schistosoma mansoni egg

Directory of Open Access Journals (Sweden)

Rita Gabriela Pedrosa Ribeiro Mendes

2011-11-01

Full Text Available A peptide (SmB2LJ; r175-194 that belongs to a conserved domain from Schistosoma mansoni SmATPDase 2 and is shared with potato apyrase, as predicted by in silico analysis as antigenic, was synthesised and its immunostimulatory property was analysed. When inoculated in BALB/c mice, this peptide induced high levels of SmB2LJ-specific IgG1 and IgG2a subtypes, as detected by enzyme linked immunosorbent assay. In addition, dot blots were found to be positive for immune sera against potato apyrase and SmB2LJ. These results suggest that the conserved domain r175-194 from the S. mansoni SmATPDase 2 is antigenic. Western blots were performed and the anti-SmB2LJ antibody recognised in adult worm (soluble worm antigen preparation or soluble egg antigen antigenic preparations two bands of approximately 63 and 55 kDa, molecular masses similar to those predicted for adult worm SmATPDase 2. This finding strongly suggests the expression of this same isoform in S. mansoni eggs. To assess localisation of SmATPDase 2, confocal fluorescence microscopy was performed using cryostat sections of infected mouse liver and polyclonal antiserum against SmB2LJ. Positive reactions were identified on the external surface from the miracidium in von Lichtenberg's envelope and, in the outer side of the egg-shell, showing that this soluble isoform is secreted from the S. mansoni eggs.

Results of the radiological survey at 4 Branca Court, Lodi, New Jersey (LJ037)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.R.; Crutcher, J.W.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 4 Branca Court, Lodi, New Jersey (LJ037), was conducted during 1985 and 1986. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. However, this property is apparently located directly over the old Lodi Brook streambed. This factor in combination with the elevated gamma logs of several auger holes is sufficient to recommend this site for inclusion in the DOE remedial action program. 5 refs., 5 figs., 4 tabs

Results of the radiological survey at 72 Sidney Stret, Lodi, New Jersey (LJ067)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.; Floyd, L.M.; Crutcher, J.W.

1989-09-01

Maywood Chemical Works (MCW) of Maywood, New jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residues used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 72 Sidney Street, Lodi, New Jersey (LJ067), was conducted during 1987. Results indicated concentrations of 232 Th slightly in excess of the DOE remedial action criterion for subsurface soil. This finding, coupled with the fact that adjacent properties have been designated by DOE for remedial action, and that the old Lodi Brook streambed is apparently beneath the property, suggests that it be considered for inclusion in the DOE remedial action program. 4 refs., 5 figs., 3 tabs

Results of the radiological survey at 90 C Avenue, Lodi, New Jersey (LJ079)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducted an investigative radiological survey during 1988 at 90 C Avenue, Lodi, New Jersey (LJ079), one of the properties in the vicinity of the MCW site. The survey included a gamma radiation scan of the surface and at one meter above the surface, as well as radionuclide sampling of surface and subsurface soil. The survey objective was to determine whether this site was contaminated with radioactive residues derived from MCW, principally 232 Th. Results of the survey demonstrated radionuclide concentrations in excess of DOE remedial action criteria, primarily from the 232 Th decay chain, with some contamination from 226 Ra. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 3 figs., 3 tabs

Results of the radiological survey at 30 Long Valley Road, Lodi, New Jersey (LJ045)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 30 Long Valley Road, Lodi, New Jersey (LJ045), was conducted during 1985, 1986, and 1987. Some radionuclide measurements were greater than typical background levels in the northern New Jersey area. However, results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 10 figs., 3 tabs

Results of the radiological survey at 32 Long Valley Road, Lodi, New Jersey (LJ046)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 32 Long Valley Road, Lodi, New Jersey (LJ046), was conducted during 1985, 1986, and 1987. Some radionuclide measurements were greater than typical background levels in the northern New Jersey area. However, results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 6 figs., 3 tabs

Results of the radiological survey at 10 Long Valley Road, Lodi, New Jersey (LJ055)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 10 Long Valley Road, Lodi, New Jersey (LJ055), was conducted during 1985 and 1986. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 5 figs., 3 tabs

Results of the radiological survey at 24 Long Valley Road, Lodi, New Jersey (LJ048)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-08-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monozite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 24 Long Valley Road, Lodi, New Jersey (LJ048), was conducted during 1985 and 1986. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 8 figs., 3 tabs

Results of the radiological survey at 28 Long Valley Road, Lodi, New Jersey (LJ047)

International Nuclear Information System (INIS)

Cottrell, W.D.; Floyd, L.M.; Francis, M.W.; Mynatt, J.O.

1989-10-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 28 Long Valley Road, Lodi, New Jersey (LJ047), was conducted during 1985, 1986, 1987. Some radionuclide measurements were greater than typical background levels in the northern New Jersey area. However, results of the Survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. 5 refs., 8 figs., 3 tabs

A conversation with Drs. Kaplan and Moser about conflicting data, confusing results, and some recent treatment recommendations for the management of hypertension.

Science.gov (United States)

Post, Wendy; Moser, Marvin; Kaplan, Norman

2005-10-01

Following a hypertension symposium in Baltimore, MD, on June 1, 2005, Dr. Wendy Post from the Johns Hopkins University School of Medicine, Baltimore, MD, had the opportunity to interview two of the outstanding hypertension experts in the United States on several controversial issues in hypertension management. Dr. Norman Kaplan is Clinical Professor of Medicine at the Southwestern Health Science Center in Dallas, TX, and Dr. Marvin Moser is Clinical Professor of Medicine at the Yale University School of Medicine, New Haven, CT. Both have been leaders in the field of hypertension treatment and education for more than 40 years. Dr. Kaplan's book Clinical Hypertension has been a standard textbook since 1973 and is now in its ninth edition. Dr. Marvin Moser was the Senior Medical Consultant to the National High Blood Pressure Education Program from 1974 to 2002 and was Chairman of the first Joint National Committee on Detection, Evaluation, and Treatment of High Blood Pressure and a member of the six subsequent committees. His book Clinical Management of Hypertension is in its seventh edition. Drs. Moser and Kaplan were corecipients of the 2004 International Society of Hypertension Award for Outstanding Contributions to Hypertension Treatment and Education and have lectured extensively throughout the United States and overseas.

Development of low head Kaplan turbine for power station rehabilitation project

Science.gov (United States)

Lim, S. M.; Ohtake, N.; Kurosawa, S.; Suzuki, T.; Yamasaki, T.; Nishi, H.

2012-11-01

This paper presents the latest Kaplan turbine rehabilitation project for Funagira Power Station in Japan completed by J-POWER Group in collaboration with Toshiba Corporation. Area of rehabilitation was restricted to guide vane and runner. The main goal of the rehabilitation project was to expand the operating range of the existing turbine in terms of discharge and power with high operational stability, low noise as well as high cavitation performance. Computational Fluids Dynamics and model test were used to optimize the shape of guide vane and runner in development stage. Finally, field tests and runner inspection were carried out to confirm the performance of the new turbine. It was found that the new turbine has excellent performance in efficiency, power output, operational stability compared with existing turbine. Moreover, no sign of cavitation on the runner blade surface was observed after 5078 hours of operation near 100% load.

Development of low head Kaplan turbine for power station rehabilitation project

International Nuclear Information System (INIS)

Lim, S M; Ohtake, N; Kurosawa, S; Suzuki, T; Yamasaki, T; Nishi, H

2012-01-01

This paper presents the latest Kaplan turbine rehabilitation project for Funagira Power Station in Japan completed by J-POWER Group in collaboration with Toshiba Corporation. Area of rehabilitation was restricted to guide vane and runner. The main goal of the rehabilitation project was to expand the operating range of the existing turbine in terms of discharge and power with high operational stability, low noise as well as high cavitation performance. Computational Fluids Dynamics and model test were used to optimize the shape of guide vane and runner in development stage. Finally, field tests and runner inspection were carried out to confirm the performance of the new turbine. It was found that the new turbine has excellent performance in efficiency, power output, operational stability compared with existing turbine. Moreover, no sign of cavitation on the runner blade surface was observed after 5078 hours of operation near 100% load.

Implementation of pressurized air injection system in a Kaplan prototype for the reduction of vibration caused by tip vortex cavitation

Science.gov (United States)

Rivetti, A.; Angulo, M.; Lucino, C.; Hene, M.; Capezio, O.; Liscia, S.

2016-11-01

Blade tip cavitation is a well-known phenomenon that affects the performance of large-diameter Kaplan turbines and induces structural vibration. Injection of pressurized air has been found to yield promising results in reducing those damaging effects. In this work, the results of an experimental test of air injection on a 9.5-m-diameter Kaplan turbine are reported. Experiments were performed for several load conditions and for two different net heads. Accelerations, pressure pulsation and noise emission were monitored for every tested condition. Results show that, at the expense of a maximum efficiency drop of 0.2%, air injection induces a decrease on the level of vibration from 57% up to 84%, depending on the load condition. Such decrease is seen to be proportional to the air flow rate, in the range from 0.06 to 0.8‰ (respect to the discharge at the best efficiency point).

Results of the radiological survey at 9 Redstone Lane, Lodi, New Jersey (LJ069)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.

1989-07-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process waste and residues associated with the production and refining of thorium and thorium compounds from monozite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Areas residents used the sandlike waste from this thorium extraction process mixed with teas and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigate radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 9 Redstone Lane, Lodi, New Jersey (LJ069), was conducted during 1987. Measurements at the private property located at 9 Redstone Lane indicate slightly elevated gamma exposure rates in association with cinder-like material observed in logging holes. These elevated levels result from naturally occurring radioactivity present in such substances as ashes and cinders. They are not related to the deposit of residues from processing operations at the MCW site. All other radiological findings conform to the guidelines established by the DOE for the Maywood, New Jersey, area remedial action plan. 4 refs., 3 figs., 3 tabs

Results of the radiological survey at 4 Hancock Street, Lodi, New Jersey (LJ060)

International Nuclear Information System (INIS)

Foley, R.D.; Carier, R.F.; Floyd, L.M.; Crutcher, J.W.

1989-09-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, 4 Hancock Street, Lodi, New Jersey (LJ060), was conducted during 1985 and 1986. Gamma logging results found during this survey and during a previous survey conducted by Bechtel National, Incorporated, strongly indicated radionuclide concentrations in subsurface soil in excess of DOE remedial action criteria. This finding, coupled with the fact that adjacent properties have been found to be contaminated and that Lodi Brook apparently flows under the property, suggests that it be considered for inclusion in the DOE remedial action program. 5 refs., 4 figs., 4 tabs

Numerical Analysis of Flow in Kaplan Turbine Runner Blades Anticavitation Lip with Modified Hydro-dynamic Profile

Directory of Open Access Journals (Sweden)

Vasile Cojocaru

2011-09-01

Full Text Available In order to increase the lifetime of runner blades of Kaplan turbines damaged by cavitation erosion, an anticavitation lip is attached to the periphery of the runner blades on the suction side. The anticavitation lip overtakes the cavitation pitting which appears between the runner blades and the runner chamber. A blade with the original anticavitation lip was modeled using CAE. The numerical simulations showed the tip vortex position and the source of the cavitation erosion. Using these data, a modified profile of the anticavitation lip was designed.

Results of the radiological survey at Kennedy Park, Money and Sidney Streets, Lodi, New Jersey (LJ062)

International Nuclear Information System (INIS)

Foley, R.D.; Cottrell, W.D.; Floyd, L.M.

1989-07-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, Kennedy Park, Money and Sidney Streets, Lodi, New Jersey (LJ062), was conducted during 1986 and 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 4 figs., 3 tabs

Webbaserad pedagogisk meritportfölj - från idé till verklighet

Directory of Open Access Journals (Sweden)

Jakob Johansson

2011-03-01

åväl sökanden som bedömare. Det finns behov av redovisning av pedagogiska meriter även för andra ändamål än vid tjänstetillsättningar. Många medarbetare (som inte avser att söka akademisk tjänst gör betydande insatser i undervisningen exempelvis i form av administration, föreläsningar, seminarieledning samt klinisk handledning, och dessa prestationer bör användas som underlag för exempelvis planeringssamtal, löneförhandlingar och kompetensutveckling. Många finner det svårt att redovisa dessa undervisningsinsatser. Orsaken till detta är sannolikt delvis bristen på tradition att bokföra pedagogiskt arbetet (i kontrast till vetenskapligt arbete, men också bristen på ett användarvänligt verktyg för bokföring. Detta var startskottet för ett projekt som syftade till att framställa en personlig webbaserad pedagogisk meritportfölj som skulle kunna överbrygga det praktiska bekymret och ge medarbetarna ett smidigt verktyg för dokumentation av och reflektion runt pedagogiska meriter. Detta samtidigt som det skulle vara acceptabelt som instrument för sökande av akademisk tjänst genom att bygga på Uppsala universitets pedagogiska program och riktlinjer för meritvärdering. Denna artikel beskriver processen från idé till färdig webbaserad pedagogisk meritportfölj för vetenskapsområdet för medicin och farmaci vid Uppsala universitet. Även om det sannolikt existerar liknande webb-verktyg för bokföring av pedagogiska meriter så är detta oss veterligen det första verktyg i sitt slag som framställts och beskrivits. Syftet med artikeln är att sprida kunskap om både konceptet och arbetsprocessen för att underlätta spridning till andra fakulteter och lärosäten.

Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

Energy Technology Data Exchange (ETDEWEB)

Petit, O; Nilsson, H [Division of Fluid Mechanics, Chalmers University of Technology, Hoersalsvaegen 7A, SE-41296 Goeteborg (Sweden); Mulu, B; Cervantes, M, E-mail: olivierp@chalmers.s [Division of Fluid Mechanics, Luleaa University of Technology, SE-971 87 Luleaa (Sweden)

2010-08-15

The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Alvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

Science.gov (United States)

Petit, O.; Mulu, B.; Nilsson, H.; Cervantes, M.

2010-08-01

The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Älvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

Comparison of numerical and experimental results of the flow in the U9 Kaplan turbine model

International Nuclear Information System (INIS)

Petit, O; Nilsson, H; Mulu, B; Cervantes, M

2010-01-01

The present work compares simulations made using the OpenFOAM CFD code with experimental measurements of the flow in the U9 Kaplan turbine model. Comparisons of the velocity profiles in the spiral casing and in the draft tube are presented. The U9 Kaplan turbine prototype located in Porjus and its model, located in Alvkarleby, Sweden, have curved inlet pipes that lead the flow to the spiral casing. Nowadays, this curved pipe and its effect on the flow in the turbine is not taken into account when numerical simulations are performed at design stage. To study the impact of the inlet pipe curvature on the flow in the turbine, and to get a better overview of the flow of the whole system, measurements were made on the 1:3.1 model of the U9 turbine. Previously published measurements were taken at the inlet of the spiral casing and just before the guide vanes, using the laser Doppler anemometry (LDA) technique. In the draft tube, a number of velocity profiles were measured using the LDA techniques. The present work extends the experimental investigation with a horizontal section at the inlet of the draft tube. The experimental results are used to specify the inlet boundary condition for the numerical simulations in the draft tube, and to validate the computational results in both the spiral casing and the draft tube. The numerical simulations were realized using the standard k-e model and a block-structured hexahedral wall function mesh.

How Do We Defend Democratic Education? Lois Weiner and Andy Kaplan Respond to Diane Ravitch's "The Reign of Error"

Science.gov (United States)

Weiner, Lois; Kaplan, Andy

2014-01-01

In this commentary, Andy Kaplan discusses with Lois Weiner, Diane Ravitch's latest book "The Reign of Error," which combines scholarly argument and scrupulous research in defense of democratic education. Weiner notes, the book will prove an important resource in the ongoing struggle for the survival of public schooling. Weiner adds,…

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

Science.gov (United States)

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

KMWin--a convenient tool for graphical presentation of results from Kaplan-Meier survival time analysis.

Directory of Open Access Journals (Sweden)

Arnd Gross

Full Text Available BACKGROUND: Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav, SAS export (xpt or text file (dat, which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. RESULTS: On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. CONCLUSIONS: We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups.

Runaway transient simulation of a model Kaplan turbine

Energy Technology Data Exchange (ETDEWEB)

Liu, S; Liu, D; Wu, Y [State Key Laboratory of Hydroscience and Engineering, Department of Thermal Eng., Tsinghua University, Beijing, 100084 (China); Zhou, D [Water Conservancy and Hydropower Eng., Hohai University, Nanjing. 210098 (China); Nishi, M, E-mail: liushuhong@tsinghua.edu.c [Kyushu Inst. Tech. Senior Academy, Kitakyushu, 804-8550 (Japan)

2010-08-15

The runaway transient is a typical transient process of a hydro power unit, where the rotational speed of a turbine runner rapidly increases up to the runaway speed under a working head as the guide vanes cannot be closed due to some reason at the load rejection. In the present paper, the characteristics of the runaway transient of a model Kaplan turbine having ns = 479(m-kW) is simulated by using a time-dependent CFD technique where equation of rotational motion of runner, continuity equation and unsteady RANS equations with RNG k-{epsilon} turbulence model are solved iteratively. In the calculation, unstructured mesh is used to the whole flow passage, which consists of several sub-domains: entrance, casing, stay vanes + guide vanes, guide section, runner and draft tube. And variable speed sliding mesh technique is used to exchange interface flow information between moving part and stationary part, and three-dimensional unstructured dynamic mesh technique is also adopted to ensure mesh quality. Two cases were treated in the simulation of runaway transient characteristics after load rejection: one is the rated operating condition as the initial condition, and the other is the condition at the maximum head. Regarding the runaway speed, the experimental speed is 1.45 times the initial speed and the calculation is 1.47 times the initial for the former case. In the latter case, the experiment and the calculation are 1.67 times and 1.69 times respectively. From these results, it is recognized that satisfactorily prediction will be possible by using the present numerical method. Further, numerical results show that the swirl in the draft-tube flow becomes stronger in the latter part of the transient process so that a vortex rope will occur in the draft tube and its precession will cause the pressure fluctuations which sometimes affect the stability of hydro power system considerably.

Runaway transient simulation of a model Kaplan turbine

Science.gov (United States)

Liu, S.; Zhou, D.; Liu, D.; Wu, Y.; Nishi, M.

2010-08-01

The runaway transient is a typical transient process of a hydro power unit, where the rotational speed of a turbine runner rapidly increases up to the runaway speed under a working head as the guide vanes cannot be closed due to some reason at the load rejection. In the present paper, the characteristics of the runaway transient of a model Kaplan turbine having ns = 479(m-kW) is simulated by using a time-dependent CFD technique where equation of rotational motion of runner, continuity equation and unsteady RANS equations with RNG k-epsilon turbulence model are solved iteratively. In the calculation, unstructured mesh is used to the whole flow passage, which consists of several sub-domains: entrance, casing, stay vanes + guide vanes, guide section, runner and draft tube. And variable speed sliding mesh technique is used to exchange interface flow information between moving part and stationary part, and three-dimensional unstructured dynamic mesh technique is also adopted to ensure mesh quality. Two cases were treated in the simulation of runaway transient characteristics after load rejection: one is the rated operating condition as the initial condition, and the other is the condition at the maximum head. Regarding the runaway speed, the experimental speed is 1.45 times the initial speed and the calculation is 1.47 times the initial for the former case. In the latter case, the experiment and the calculation are 1.67 times and 1.69 times respectively. From these results, it is recognized that satisfactorily prediction will be possible by using the present numerical method. Further, numerical results show that the swirl in the draft-tube flow becomes stronger in the latter part of the transient process so that a vortex rope will occur in the draft tube and its precession will cause the pressure fluctuations which sometimes affect the stability of hydro power system considerably.

Runaway transient simulation of a model Kaplan turbine

International Nuclear Information System (INIS)

Liu, S; Liu, D; Wu, Y; Zhou, D; Nishi, M

2010-01-01

The runaway transient is a typical transient process of a hydro power unit, where the rotational speed of a turbine runner rapidly increases up to the runaway speed under a working head as the guide vanes cannot be closed due to some reason at the load rejection. In the present paper, the characteristics of the runaway transient of a model Kaplan turbine having ns = 479(m-kW) is simulated by using a time-dependent CFD technique where equation of rotational motion of runner, continuity equation and unsteady RANS equations with RNG k-ε turbulence model are solved iteratively. In the calculation, unstructured mesh is used to the whole flow passage, which consists of several sub-domains: entrance, casing, stay vanes + guide vanes, guide section, runner and draft tube. And variable speed sliding mesh technique is used to exchange interface flow information between moving part and stationary part, and three-dimensional unstructured dynamic mesh technique is also adopted to ensure mesh quality. Two cases were treated in the simulation of runaway transient characteristics after load rejection: one is the rated operating condition as the initial condition, and the other is the condition at the maximum head. Regarding the runaway speed, the experimental speed is 1.45 times the initial speed and the calculation is 1.47 times the initial for the former case. In the latter case, the experiment and the calculation are 1.67 times and 1.69 times respectively. From these results, it is recognized that satisfactorily prediction will be possible by using the present numerical method. Further, numerical results show that the swirl in the draft-tube flow becomes stronger in the latter part of the transient process so that a vortex rope will occur in the draft tube and its precession will cause the pressure fluctuations which sometimes affect the stability of hydro power system considerably.

Analytical Method to Estimate Fatigue Life Time Duration in Service for Runner Blade Mechanism of Kaplan Turbines

Directory of Open Access Journals (Sweden)

Ana – Maria Budai

2010-10-01

Full Text Available The paper present an analytical method that can be used to determianted fatigue life time duration in service for runner blade mechanism of Kaplan turbines. The study was made for lever button of runer blade mechanism using two analytical relation to calculate the maximum number of stress cycles whereupon the mechanism work without any damage. To estimate fatigue life time duration will be used a formula obtained from one of most comon cumulative damage methodology taking in consideration the real exploatation conditions of a specified Kapaln turbine.

Results of the radiological survey at the Napp Chemical Company, 199 Main Street, Lodi, New Jersey (LJ076)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Carrier, R.F.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, the Napp Chemical Company, 199 Main Street, Lodi, New Jersey (LJ076), was conducted during 1987. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 8 figs., 3 tabs

Blade profile optimization of kaplan turbine using cfd analysis

International Nuclear Information System (INIS)

Janjua, A.B.; Khalil, M.S.

2013-01-01

Utilization of hydro-power as renewable energy source is of prime importance in the world now. Hydropower energy is available in abundant in form of falls, canals rivers, dams etc. It means, there are various types of sites with different parameters like flow rate, heads, etc. Depending upon the sites, water turbines are designed and manufactured to avail hydro-power energy. Low head turbines on runof-river are widely used for the purpose. Low head turbines are classified as reaction turbines. For runof-river, depending upon the variety of site data, low head Kaplan turbines are selected, designed and manufactured. For any given site requirement, it becomes very essential to design the turbine runner blades through optimization of the CAD model of blades profile. This paper presents the optimization technique carried out on a complex geometry of blade profile through static and dynamic computational analysis. It is used through change of the blade profile geometry at five different angles in the 3D (Three Dimensional) CAD model. Blade complex geometry and design have been developed by using the coordinates point system on the blade in PRO-E /CREO software. Five different blade models are developed for analysis purpose. Based on the flow rate and heads, blade profiles are analyzed using ANSYS software to check and compare the output results for optimization of the blades for improved results which show that by changing blade profile angle and its geometry, different blade sizes and geometry can be optimized using the computational techniques with changes in CAD models. (author)

Blade Profile Optimization of Kaplan Turbine Using CFD Analysis

Directory of Open Access Journals (Sweden)

Aijaz Bashir Janjua

2013-10-01

Full Text Available Utilization of hydro-power as renewable energy source is of prime importance in the world now. Hydropower energy is available in abundant in form of falls, canals rivers, dams etc. It means, there are various types of sites with different parameters like flow rate, heads, etc. Depending upon the sites, water turbines are designed and manufactured to avail hydro-power energy. Low head turbines on runof-river are widely used for the purpose. Low head turbines are classified as reaction turbines. For runof river, depending upon the variety of site data, low head Kaplan turbines are selected, designed and manufactured. For any given site requirement, it becomes very essential to design the turbine runner blades through optimization of the CAD model of blades profile. This paper presents the optimization technique carried out on a complex geometry of blade profile through static and dynamic computational analysis. It is used through change of the blade profile geometry at five different angles in the 3D (Three Dimensional CAD model. Blade complex geometry and design have been developed by using the coordinates point system on the blade in PRO-E /CREO software. Five different blade models are developed for analysis purpose. Based on the flow rate and heads, blade profiles are analyzed using ANSYS software to check and compare the output results for optimization of the blades for improved results which show that by changing blade profile angle and its geometry, different blade sizes and geometry can be optimized using the computational techniques with changes in CAD models.

Statistical evaluation of a project to estimate fish trajectories through the intakes of Kaplan hydropower turbines

Science.gov (United States)

Sutton, Virginia Kay

This paper examines statistical issues associated with estimating paths of juvenile salmon through the intakes of Kaplan turbines. Passive sensors, hydrophones, detecting signals from ultrasonic transmitters implanted in individual fish released into the preturbine region were used to obtain the information to estimate fish paths through the intake. Aim and location of the sensors affects the spatial region in which the transmitters can be detected, and formulas relating this region to sensor aiming directions are derived. Cramer-Rao lower bounds for the variance of estimators of fish location are used to optimize placement of each sensor. Finally, a statistical methodology is developed for analyzing angular data collected from optimally placed sensors.

;:::,!,lj

African Journals Online (AJOL)

The potential effect of the ... coenzyme A (HMG-CoA) reductase inhibitors, drugs which have been shown to be .... The Ras family of small GTP-binding proteins act as important ... Defects in this switching mechanism give rise to disease.

Gastric emptying of solids in humans: improved evaluation by Kaplan-Meier plots, with special reference to obesity and gender

International Nuclear Information System (INIS)

Grybaeck, P.; Naeslund, E.; Hellstroem, P.M.; Jacobsson, H.; Backman, L.

1996-01-01

It has been suggested that obesity is associated with an altered rate of gastric emptying, and that there are also sex differences in gastric emptying. The results of earlier studies examining gastric emptying rates in obesity and in males and females have proved inconsistent. The aim of this study was to investigate the influence of obesity and gender on gastric emptying, by extending conventional evaluation methods with Kaplan-Meier plots, in order to assess whether these factors have to be accounted for when interpreting results of scintigraphic gastric emptying tests. Twenty-one normal-weight volunteers and nine obese subjects were fed a standardised technetium-99m labelled albumin omelette. Imaging data were acquired at 5- and 10-min intervals in both posterior and anterior projections with the subjects in the sitting position. The half-emptying time, analysed by Kaplan-Meier plot (log-rank test), were shorter in obese subjects compared to normal-weight subjects and later in females compared to males. Also, the lag-phase and half-emptying time were shorter in obese females than in normal females. This study shows an association between different gastric emptying rates and obesity and gender. Therefore, body mass index and gender have to be accounted for when interpreting results of scintigraphic gastric emptying studies. (orig.). With 6 figs., 4 tabs

Gastric emptying of solids in humans: improved evaluation by Kaplan-Meier plots, with special reference to obesity and gender

Energy Technology Data Exchange (ETDEWEB)

Grybaeck, P. [Department of Diagnostic Radiology, Karolinska Hospital, Stockholm (Sweden); Naeslund, E. [Department of Surgery, Karolinska Institute at Danderyd Hospital, Stockholm (Sweden); Hellstroem, P.M. [Department of Internal Medicine, Karolinska Hospital, Stockholm (Sweden); Jacobsson, H. [Department of Diagnostic Radiology, Karolinska Hospital, Stockholm (Sweden)]|[Department of Nuclear Medicine, Karolinska Hospital, Stockholm (Sweden); Backman, L. [Department of Surgery, Karolinska Institute at Danderyd Hospital, Stockholm (Sweden)

1996-12-01

It has been suggested that obesity is associated with an altered rate of gastric emptying, and that there are also sex differences in gastric emptying. The results of earlier studies examining gastric emptying rates in obesity and in males and females have proved inconsistent. The aim of this study was to investigate the influence of obesity and gender on gastric emptying, by extending conventional evaluation methods with Kaplan-Meier plots, in order to assess whether these factors have to be accounted for when interpreting results of scintigraphic gastric emptying tests. Twenty-one normal-weight volunteers and nine obese subjects were fed a standardised technetium-99m labelled albumin omelette. Imaging data were acquired at 5- and 10-min intervals in both posterior and anterior projections with the subjects in the sitting position. The half-emptying time, analysed by Kaplan-Meier plot (log-rank test), were shorter in obese subjects compared to normal-weight subjects and later in females compared to males. Also, the lag-phase and half-emptying time were shorter in obese females than in normal females. This study shows an association between different gastric emptying rates and obesity and gender. Therefore, body mass index and gender have to be accounted for when interpreting results of scintigraphic gastric emptying studies. (orig.). With 6 figs., 4 tabs.

Meritev izkoristka in nastavitev krmilnih parametrov kaplanove turbine z dolgim cevnim sistemom s primerjalno metodo: Measurement of relative turbine efficiency and adjustment of governing parameters on long penstock Kaplan turbine with comparative method:

OpenAIRE

Trebše, Andrej J.

2004-01-01

The paper deals with efficiency measurement of Kaplan turbine with relative method (index test) and adjustment of operating of runner and guide vane governing system. At certain longer penstocks the looses in conduit at turbineload operation change the net head. On basis of model test on Kaplan turbine and relative turbine efficiency measurement on prototype the turbine governing system was optimized in accordance with comparative method. Prispevek obravnava meritev izkoristka kaplanove tu...

Examining the Latent Structure of the Delis-Kaplan Executive Function System.

Science.gov (United States)

Karr, Justin E; Hofer, Scott M; Iverson, Grant L; Garcia-Barrera, Mauricio A

2018-05-04

The current study aimed to determine whether the Delis-Kaplan Executive Function System (D-KEFS) taps into three executive function factors (inhibition, shifting, fluency) and to assess the relationship between these factors and tests of executive-related constructs less often measured in latent variable research: reasoning, abstraction, and problem solving. Participants included 425 adults from the D-KEFS standardization sample (20-49 years old; 50.1% female; 70.1% White). Eight alternative measurement models were compared based on model fit, with test scores assigned a priori to three factors: inhibition (Color-Word Interference, Tower), shifting (Trail Making, Sorting, Design Fluency), and fluency (Verbal/Design Fluency). The Twenty Questions, Word Context, and Proverb Tests were predicted in separate structural models. The three-factor model fit the data well (CFI = 0.938; RMSEA = 0.047), although a two-factor model, with shifting and fluency merged, fit similarly well (CFI = 0.929; RMSEA = 0.048). A bifactor model fit best (CFI = 0.977; RMSEA = 0.032) and explained the most variance in shifting indicators, but rarely converged among 5,000 bootstrapped samples. When the three first-order factors simultaneously predicted the criterion variables, only shifting was uniquely predictive (p measuring executive-related constructs and provide a framework through which clinicians can interpret D-KEFS results.

KMWin – A Convenient Tool for Graphical Presentation of Results from Kaplan-Meier Survival Time Analysis

Science.gov (United States)

Gross, Arnd; Ziepert, Marita; Scholz, Markus

2012-01-01

Background Analysis of clinical studies often necessitates multiple graphical representations of the results. Many professional software packages are available for this purpose. Most packages are either only commercially available or hard to use especially if one aims to generate or customize a huge number of similar graphical outputs. We developed a new, freely available software tool called KMWin (Kaplan-Meier for Windows) facilitating Kaplan-Meier survival time analysis. KMWin is based on the statistical software environment R and provides an easy to use graphical interface. Survival time data can be supplied as SPSS (sav), SAS export (xpt) or text file (dat), which is also a common export format of other applications such as Excel. Figures can directly be exported in any graphical file format supported by R. Results On the basis of a working example, we demonstrate how to use KMWin and present its main functions. We show how to control the interface, customize the graphical output, and analyse survival time data. A number of comparisons are performed between KMWin and SPSS regarding graphical output, statistical output, data management and development. Although the general functionality of SPSS is larger, KMWin comprises a number of features useful for survival time analysis in clinical trials and other applications. These are for example number of cases and number of cases under risk within the figure or provision of a queue system for repetitive analyses of updated data sets. Moreover, major adjustments of graphical settings can be performed easily on a single window. Conclusions We conclude that our tool is well suited and convenient for repetitive analyses of survival time data. It can be used by non-statisticians and provides often used functions as well as functions which are not supplied by standard software packages. The software is routinely applied in several clinical study groups. PMID:22723912

Repair of Kaplan turbine shaft sealing based on evaluation of hydraulic conditions

International Nuclear Information System (INIS)

Lakatos, K; Szamosi, Z; Bereczkei, S

2012-01-01

This paper has been written to call attention to a potential danger what may occur in Kaplan turbine refurbishments. In Tiszalök hydropower plant, Hungary, the shaft sealing of the refurbished turbine was damaged. In searching for the reasons it was assumed that due to increased internal velocities in the turbine, the pressure at the hub clearance became lower than the atmospheric pressure, and therefore the sealing, which always operated satisfactorily before the refurbishment, had uncertain water supply, dry-running occurred, and after some time the sealing was burnt. First the flow conditions in the turbine and the pressure at the hub clearance were calculated by a one-dimensional flow model. Later this was refined by a two-dimensional approach. The above conclusion was also justified by the data acquisition system and by observing the operation of the small dewatering pump. When the turbine operated at a larger discharge than a certain limit value, then the dewatering pump remained standstill, indicating that no water passed through the shaft sealing. External water supply was then applied, and after this the turbine operated all right.

Repair of Kaplan turbine shaft sealing based on evaluation of hydraulic conditions

Science.gov (United States)

Lakatos, K.; Szamosi, Z.; Bereczkei, S.

2012-11-01

This paper has been written to call attention to a potential danger what may occur in Kaplan turbine refurbishments. In Tiszalök hydropower plant, Hungary, the shaft sealing of the refurbished turbine was damaged. In searching for the reasons it was assumed that due to increased internal velocities in the turbine, the pressure at the hub clearance became lower than the atmospheric pressure, and therefore the sealing, which always operated satisfactorily before the refurbishment, had uncertain water supply, dry-running occurred, and after some time the sealing was burnt. First the flow conditions in the turbine and the pressure at the hub clearance were calculated by a one-dimensional flow model. Later this was refined by a two-dimensional approach. The above conclusion was also justified by the data acquisition system and by observing the operation of the small dewatering pump. When the turbine operated at a larger discharge than a certain limit value, then the dewatering pump remained standstill, indicating that no water passed through the shaft sealing. External water supply was then applied, and after this the turbine operated all right.

Numerical Investigation of the Flow Structure in a Kaplan Draft Tube at Part Load

Science.gov (United States)

Maddahian, R.; Cervantes, M. J.; Sotoudeh, N.

2016-11-01

This research presents numerical simulation of the unsteady flow field inside the draft tube of a Kaplan turbine at part load condition. Due to curvature of streamlines, the ordinary two-equations turbulence models fail to predict the flow features. Therefore, a modification of the Shear Stress Transport (SST-SAS) model is utilized to approximate the turbulent stresses. A guide vane, complete runner and draft tube are considered to insure the real boundary conditions at the draft tube inlet. The outlet boundary is assumed to discharge into the atmosphere. The obtained pressure fluctuations inside the draft tube are in good agreement with available experimental data. In order to further investigate the RVR formation and its movement, the λ2 criterion, relating the position of the vortex core and strength to the second largest Eigen value of the velocity gradient tensor, is employed. The method used for vortex identification shows the flow structure and vortex motion inside the draft tube accurately.

Results of the radiological survey at Interstate 80, North Right of Way at Lodi Brook, Lodi, New Jersey (LJ077)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-06-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and oil sampling for radionuclide analyses. The survey of this site, on the North Right of Way of Interstate 80 at Lodi Brook, Lodi, New Jersey (LJ077), was conducted during 1988. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 5 refs., 3 figs., 3 tabs

Biostatistics with emphasis on life table survival rate calculations (including Kaplan Meier) and the logrank test

International Nuclear Information System (INIS)

Mould, Richard F.

1995-01-01

Purpose/Objective: To explain some of the most useful statistical calculation procedures which are relevant to radiation oncologists and to provide insights on what tests and procedures should be used in various situations such as when survival rates and their associated standard errors have to be determined. To describe some of the problems and pitfalls in clinical trial designs which have to be overcome if a trial is to have the possibility of reaching a successful conclusion. To review methods of computing criteria to quantitatively describe criteria of success (eg. quality of life, long-term survival, cure) of radiation oncology and to suggest possible future statistical improvements in this area. Chi-Squared Test: The chi-squared test is probably the most useful of the tests of statistical significance for the radiation oncologist. Applications will be described, including goodness of fit tests and 2x2 contingency tables which are the simplest of the generalized nxm contingency tables. Degrees of Freedom and P<0.05 for Significance Testing: An Introduction will be given to the meaning of P<0.05 in relation to significance testing and the use of tables of critical values of a test statistic (eg. chi-squared) which are given as a function of degrees of freedom and P-values. Survival Rate Calculations for Grouped and Ungrouped Data: The life-table method (sometimes termed the actuarial method) will be explained for both grouped data (eg. survival times grouped in annual intervals for patients who have died and for those who are still alive or lost to follow-up) and for ungrouped data (when individual survival times are used). The method for ungrouped data is variously termed the Kaplan-Meier or Product Limit method. Logrank Test: This is the most useful test for comparison of the survival experience of two groups of patients and its use will be explained. In part the computation is similar to that for the Kaplan-Meier/Product Limit method

Biostatistics with emphasis on life table survival rate calculations (including Kaplan Meier) and the logrank test

Energy Technology Data Exchange (ETDEWEB)

Mould, Richard F

1995-07-01

Purpose/Objective: To explain some of the most useful statistical calculation procedures which are relevant to radiation oncologists and to provide insights on what tests and procedures should be used in various situations such as when survival rates and their associated standard errors have to be determined. To describe some of the problems and pitfalls in clinical trial designs which have to be overcome if a trial is to have the possibility of reaching a successful conclusion. To review methods of computing criteria to quantitatively describe criteria of success (eg. quality of life, long-term survival, cure) of radiation oncology and to suggest possible future statistical improvements in this area. Chi-Squared Test: The chi-squared test is probably the most useful of the tests of statistical significance for the radiation oncologist. Applications will be described, including goodness of fit tests and 2x2 contingency tables which are the simplest of the generalized nxm contingency tables. Degrees of Freedom and P<0.05 for Significance Testing: An Introduction will be given to the meaning of P<0.05 in relation to significance testing and the use of tables of critical values of a test statistic (eg. chi-squared) which are given as a function of degrees of freedom and P-values. Survival Rate Calculations for Grouped and Ungrouped Data: The life-table method (sometimes termed the actuarial method) will be explained for both grouped data (eg. survival times grouped in annual intervals for patients who have died and for those who are still alive or lost to follow-up) and for ungrouped data (when individual survival times are used). The method for ungrouped data is variously termed the Kaplan-Meier or Product Limit method. Logrank Test: This is the most useful test for comparison of the survival experience of two groups of patients and its use will be explained. In part the computation is similar to that for the Kaplan-Meier/Product Limit method.

Results of the radiological survey at the property at Main Street and Highway 46, Lodi, New Jersey (LJ074)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.; Floyd, L.M.; Crutcher, J.W.

1989-09-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurements of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site located at the intersection of Main Street and Highway 46, Lodi, New Jersey (LJ074), was conducted during 1987. While some radiological measurements taken at the vacant lot at the intersection of Main Street and Highway 46 were greater than background levels typically encountered in the northern New Jersey area, no radiation levels nor radionuclide concentrations exceeded the applicable DOE criteria. The survey results demonstrate that the radiological condition of this property conforms to DOE guidelines for remedial action. 4 refs., 5 figs., 3 tabs

Evaluation of Hydraulic Loads on the Runner Blades of a Kaplan Turbine using CFD Simulation and Model Test

Directory of Open Access Journals (Sweden)

Zoltan-Iosif Korka

2016-10-01

Full Text Available CFD (Computational Fluid Dynamic is today a standard procedure for analyzing and simulating the flow through several hydraulic machines. In this process, the fluid flow domain is divided into small volumes where the governing equations are converted into algebraic ones, which are numerically solved. Computational results strongly depend on the applied mathematical model and on the numerical methods used for converting the governing equations into the algebraic ones. The goal of the paper is to evaluate, by numerical simulation, the hydraulic loads (forces and torques on the runner blades of an existent Kaplan turbine and to compare them with the experimental results obtained from model test.

Experiences with environmentally adapted Kaplan runners; Erfarenheter med miljoeanpassade Kaplanloephjul

Energy Technology Data Exchange (ETDEWEB)

Ukonsaari; Jan

2012-08-15

This study concerns environmentally adapted Kaplan runners, which have no oil for lubricating the blade regulation mechanisms and bearings. The runners are water or air filled with self lubricated bearings. Recent design also includes regulation system pressure increase and servo motor placement below runner centre and environmentally adapted synthetic ester as hydraulic fluid. These together with power output increase and efficiency optimization are suspected sources of poor runner function. Of 37 runners 43 % have had some kind of problem and 30 % bearing or mechanism related ones. When the axial blade bearing problems are excluded the problems occurred at 16 %. Deeper look into the design of newer runners shows that only bronze based runner hubs is significantly more problem dense regarding regulation mechanisms (50 %). Hidden figures of increased runner regulation forces are suspected. All problems cannot be explained and the young machines limit the experiences. The working group's opinion and bring ups of historical and present examples during the work show evidence that the old oil filled runners function is far from perfect, nor the life length. The future is not with oil filled runner hubs. Main parts of the discovered problems have been solved and can be resolved by thorough design analysis. One future concern is what effects the recent design changes will cause due to increase demand for power output changes including the number of starts and stops. That is why the working group's recommendation is to put joint effort into material fatigue and in which a first step is to identify the real forces the runners are exposed to.

A RUTCOR Project on Discrete Applied Mathematics

Science.gov (United States)

1989-01-30

the more important results of this work is the possibility that Groebner basis methods of computational commutative algebra might lead to effective...Billera, L.J., " Groebner Basis Methods for Multivariate Splines," prepared for the Proceedings of the Oslo Conference on Computer-aided Geometric Design

The Emission, Lifetimes, and Formation Threshold of the Vegard-Kaplan Transition of Solid Nitrogen Exposed to Far-ultraviolet Radiation

Science.gov (United States)

Lu, Hsiao-Chi; Lo, Jen-Iu; Peng, Yu-Chain; Chou, Sheng-Lung; Lin, Meng-Yeh; Cheng, Bing-Ming

2016-11-01

Irradiation of solid nitrogen at 4 K with far-ultraviolet light from a synchrotron caused excitation to the upper state of the Vegard-Kaplan (VK) system; the emission in that system was simultaneously recorded in wavelength region 200-440 nm. The lifetimes of emission lines for VK (0, 1) to (0, 12) transitions were measured in the range of 2.12 ˜ 2.65 s. The threshold wavelength to observe the VK emission was 175.0 ± 3.5 nm, corresponding to energy 7.08 ± 0.14 eV. This investigation of the generation of icy VK nitrogen enhances our understanding of its photochemistry in space.

THE EMISSION, LIFETIMES, AND FORMATION THRESHOLD OF THE VEGARD–KAPLAN TRANSITION OF SOLID NITROGEN EXPOSED TO FAR-ULTRAVIOLET RADIATION

Energy Technology Data Exchange (ETDEWEB)

Lu, Hsiao-Chi; Lo, Jen-Iu; Peng, Yu-Chain; Chou, Sheng-Lung; Lin, Meng-Yeh; Cheng, Bing-Ming, E-mail: bmcheng@nsrrc.org.tw [National Synchrotron Radiation Research Center, No. 101, Hsin-Ann Road, Hsinchu Science Park, Hsinchu 30076, Taiwan (China)

2016-11-20

Irradiation of solid nitrogen at 4 K with far-ultraviolet light from a synchrotron caused excitation to the upper state of the Vegard–Kaplan (VK) system; the emission in that system was simultaneously recorded in wavelength region 200–440 nm. The lifetimes of emission lines for VK (0, 1) to (0, 12) transitions were measured in the range of 2.12 ∼ 2.65 s. The threshold wavelength to observe the VK emission was 175.0 ± 3.5 nm, corresponding to energy 7.08 ± 0.14 eV. This investigation of the generation of icy VK nitrogen enhances our understanding of its photochemistry in space.

THE EMISSION, LIFETIMES, AND FORMATION THRESHOLD OF THE VEGARD–KAPLAN TRANSITION OF SOLID NITROGEN EXPOSED TO FAR-ULTRAVIOLET RADIATION

International Nuclear Information System (INIS)

Lu, Hsiao-Chi; Lo, Jen-Iu; Peng, Yu-Chain; Chou, Sheng-Lung; Lin, Meng-Yeh; Cheng, Bing-Ming

2016-01-01

Irradiation of solid nitrogen at 4 K with far-ultraviolet light from a synchrotron caused excitation to the upper state of the Vegard–Kaplan (VK) system; the emission in that system was simultaneously recorded in wavelength region 200–440 nm. The lifetimes of emission lines for VK (0, 1) to (0, 12) transitions were measured in the range of 2.12 ∼ 2.65 s. The threshold wavelength to observe the VK emission was 175.0 ± 3.5 nm, corresponding to energy 7.08 ± 0.14 eV. This investigation of the generation of icy VK nitrogen enhances our understanding of its photochemistry in space.

A RUTCOR Project in Discrete Applied Mathematics

Science.gov (United States)

1990-02-20

representations of smooth piecewise polynomial functions over triangulated regions have led in particular to the conclusion that Groebner basis methods of...Reversing Number of a Digraph," in preparation. 4. Billera, L.J., and Rose, L.L., " Groebner Basis Methods for Multivariate Splines," RRR 1-89, January

Influence of the vibro-acoustic sensor position on cavitation detection in a Kaplan turbine

Science.gov (United States)

Schmidt, H.; Kirschner, O.; Riedelbauch, S.; Necker, J.; Kopf, E.; Rieg, M.; Arantes, G.; Wessiak, M.; Mayrhuber, J.

2014-03-01

Hydraulic turbines can be operated close to the limits of the operating range to meet the demand of the grid. When operated close to the limits, the risk increases that cavitation phenomena may occur at the runner and / or at the guide vanes of the turbine. Cavitation in a hydraulic turbine can cause material erosion on the runner and other turbine parts and reduce the durability of the machine leading to required outage time and related repair costs. Therefore it is important to get reliable information about the appearance of cavitation during prototype operation. In this experimental investigation the high frequency acoustic emissions and vibrations were measured at 20 operating points with different cavitation behaviour at different positions in a large prototype Kaplan turbine. The main goal was a comparison of the measured signals at different sensor positions to identify the sensitivity of the location for cavitation detection. The measured signals were analysed statistically and specific values were derived. Based on the measured signals, it is possible to confirm the cavitation limit of the examined turbine. The result of the investigation shows that the position of the sensors has a significant influence on the detection of cavitation.

Influence of the vibro-acoustic sensor position on cavitation detection in a Kaplan turbine

International Nuclear Information System (INIS)

Schmidt, H; Kirschner, O; Riedelbauch, S; Necker, J; Kopf, E; Rieg, M; Arantes, G; Wessiak, M; Mayrhuber, J

2014-01-01

Hydraulic turbines can be operated close to the limits of the operating range to meet the demand of the grid. When operated close to the limits, the risk increases that cavitation phenomena may occur at the runner and / or at the guide vanes of the turbine. Cavitation in a hydraulic turbine can cause material erosion on the runner and other turbine parts and reduce the durability of the machine leading to required outage time and related repair costs. Therefore it is important to get reliable information about the appearance of cavitation during prototype operation. In this experimental investigation the high frequency acoustic emissions and vibrations were measured at 20 operating points with different cavitation behaviour at different positions in a large prototype Kaplan turbine. The main goal was a comparison of the measured signals at different sensor positions to identify the sensitivity of the location for cavitation detection. The measured signals were analysed statistically and specific values were derived. Based on the measured signals, it is possible to confirm the cavitation limit of the examined turbine. The result of the investigation shows that the position of the sensors has a significant influence on the detection of cavitation

Item response theory analyses of the Delis-Kaplan Executive Function System card sorting subtest.

Science.gov (United States)

Spencer, Mercedes; Cho, Sun-Joo; Cutting, Laurie E

2018-02-02

In the current study, we examined the dimensionality of the 16-item Card Sorting subtest of the Delis-Kaplan Executive Functioning System assessment in a sample of 264 native English-speaking children between the ages of 9 and 15 years. We also tested for measurement invariance for these items across age and gender groups using item response theory (IRT). Results of the exploratory factor analysis indicated that a two-factor model that distinguished between verbal and perceptual items provided the best fit to the data. Although the items demonstrated measurement invariance across age groups, measurement invariance was violated for gender groups, with two items demonstrating differential item functioning for males and females. Multigroup analysis using all 16 items indicated that the items were more effective for individuals whose IRT scale scores were relatively high. A single-group explanatory IRT model using 14 non-differential item functioning items showed that for perceptual ability, females scored higher than males and that scores increased with age for both males and females; for verbal ability, the observed increase in scores across age differed for males and females. The implications of these findings are discussed.

A dynamic lattice searching method with rotation operation for optimization of large clusters

International Nuclear Information System (INIS)

Wu Xia; Cai Wensheng; Shao Xueguang

2009-01-01

Global optimization of large clusters has been a difficult task, though much effort has been paid and many efficient methods have been proposed. During our works, a rotation operation (RO) is designed to realize the structural transformation from decahedra to icosahedra for the optimization of large clusters, by rotating the atoms below the center atom with a definite degree around the fivefold axis. Based on the RO, a development of the previous dynamic lattice searching with constructed core (DLSc), named as DLSc-RO, is presented. With an investigation of the method for the optimization of Lennard-Jones (LJ) clusters, i.e., LJ 500 , LJ 561 , LJ 600 , LJ 665-667 , LJ 670 , LJ 685 , and LJ 923 , Morse clusters, silver clusters by Gupta potential, and aluminum clusters by NP-B potential, it was found that both the global minima with icosahedral and decahedral motifs can be obtained, and the method is proved to be efficient and universal.

Exploring Lightning Jump Characteristics

Science.gov (United States)

Chronis, Themis; Carey, Larry D.; Schultz, Christopher J.; Schultz, Elise; Calhoun, Kristin; Goodman, Steven J.

2014-01-01

This study is concerned with the characteristics of storms exhibiting an abrupt temporal increase in the total lightning flash rate (i.e., lightning jump, LJ). An automated storm tracking method is used to identify storm "clusters" and total lightning activity from three different lightning detection systems over Oklahoma, northern Alabama and Washington, D.C. On average and for different employed thresholds, the clusters that encompass at least one LJ (LJ1) last longer, relate to higher Maximum Expected Size of Hail, Vertical Integrated Liquid and lightning flash rates (area-normalized) than the clusters that did not exhibit any LJ (LJ0). The respective mean values for LJ1 (LJ0) clusters are 80 min (35 min), 14 mm (8 mm), 25 kg per square meter (18 kg per square meter) and 0.05 flash per min per square kilometer (0.01 flash per min per square kilometer). Furthermore, the LJ1 clusters are also characterized by slower decaying autocorrelation functions, a result that implies a less "random" behavior in the temporal flash rate evolution. In addition, the temporal occurrence of the last LJ provides an estimate of the time remaining to the storm's dissipation. Depending of the LJ strength (i.e., varying thresholds), these values typically range between 20-60 min, with stronger jumps indicating more time until storm decay. This study's results support the hypothesis that the LJ is a proxy for the storm's kinematic and microphysical state rather than a coincidental value.

Load variation effects on the pressure fluctuations exerted on a Kaplan turbine runner

International Nuclear Information System (INIS)

Amiri, K; Cervantes, M J; Mulu, B; Raisee, M

2014-01-01

Introduction of intermittent electricity production systems like wind power and solar systems to electricity market together with the consumption-based electricity production resulted in numerous start/stops, load variations and off-design operation of water turbines. The hydropower systems suffer from the varying loads exerted on the stationary and rotating parts of the turbines during load variations which they are not designed for. On the other hand, investigations on part load operation of single regulated turbines, i.e., Francis and propeller, proved the formation of rotating vortex rope (RVR) in the draft tube. The RVR induces oscillating flow both in plunging and rotating modes which results in oscillating force with two different frequencies on the runner blades, bearings and other rotating parts of the turbine. The purpose of this study is to investigate the effect of transient operations on the pressure fluctuations on the runner and mechanism of the RVR formation/mitigation. Draft tube and runner blades of the Porjus U9 model, a Kaplan turbine, were equipped with pressure sensors. The model was run in off-cam mode during different load variation conditions to check the runner performance under unsteady condition. The results showed that the transients between the best efficiency point and the high load happens in a smooth way while transitions to/from the part load, where rotating vortex rope (RVR) forms in the draft tube induces high level of fluctuations with two frequencies on the runner; plunging and rotating mode of the RVR

Load variation effects on the pressure fluctuations exerted on a Kaplan turbine runner

Science.gov (United States)

Amiri, K.; Mulu, B.; Raisee, M.; Cervantes, M. J.

2014-03-01

Introduction of intermittent electricity production systems like wind power and solar systems to electricity market together with the consumption-based electricity production resulted in numerous start/stops, load variations and off-design operation of water turbines. The hydropower systems suffer from the varying loads exerted on the stationary and rotating parts of the turbines during load variations which they are not designed for. On the other hand, investigations on part load operation of single regulated turbines, i.e., Francis and propeller, proved the formation of rotating vortex rope (RVR) in the draft tube. The RVR induces oscillating flow both in plunging and rotating modes which results in oscillating force with two different frequencies on the runner blades, bearings and other rotating parts of the turbine. The purpose of this study is to investigate the effect of transient operations on the pressure fluctuations on the runner and mechanism of the RVR formation/mitigation. Draft tube and runner blades of the Porjus U9 model, a Kaplan turbine, were equipped with pressure sensors. The model was run in off-cam mode during different load variation conditions to check the runner performance under unsteady condition. The results showed that the transients between the best efficiency point and the high load happens in a smooth way while transitions to/from the part load, where rotating vortex rope (RVR) forms in the draft tube induces high level of fluctuations with two frequencies on the runner; plunging and rotating mode of the RVR.

Phase separation of a Lennard-Jones fluid interacting with a long, condensed polymer chain: implications for the nuclear body formation near chromosomes.

Science.gov (United States)

Oh, Inrok; Choi, Saehyun; Jung, YounJoon; Kim, Jun Soo

2015-08-28

Phase separation in a biological cell nucleus occurs in a heterogeneous environment filled with a high density of chromatins and thus it is inevitably influenced by interactions with chromatins. As a model system of nuclear body formation in a cell nucleus filled with chromatins, we simulate the phase separation of a low-density Lennard-Jones (LJ) fluid interacting with a long, condensed polymer chain. The influence of the density variation of LJ particles above and below the phase boundary and the role of attractive interactions between LJ particles and polymer segments are investigated at a fixed value of strong self-interaction between LJ particles. For a density of LJ particles above the phase boundary, phase separation occurs and a dense domain of LJ particles forms irrespective of interactions with the condensed polymer chain whereas its localization relative to the polymer chain is determined by the LJ-polymer attraction strength. Especially, in the case of moderately weak attractions, the domain forms separately from the polymer chain and subsequently associates with the polymer chain. When the density is below the phase boundary, however, the formation of a dense domain is possible only when the LJ-polymer attraction is strong enough, for which the domain grows in direct contact with the interacting polymer chain. In this work, different growth behaviors of LJ particles result from the differences in the density of LJ particles and in the LJ-polymer interaction, and this work suggests that the distinct formation of activity-dependent and activity-independent nuclear bodies (NBs) in a cell nucleus may originate from the differences in the concentrations of body-specific NB components and in their interaction with chromatins.

Nonlinear physics of plasmas. Spatiotemporal structures in strong turbulence. Lecture notes

International Nuclear Information System (INIS)

Skoric, Milos M.

2008-05-01

This material has been prepared and partly delivered in a series of lectures given at NIFS to Doctor course students of the SOKENDAI (Graduate University of Advanced Studies, Japan) in academic 2007/08 year. Special gratitude is due to colleagues for fruitful collaboration: Profs. K. Mima, Lj. Hadzievski, S. Ishiguro, A. Maluckov, M. Rajkovic and Dr Li Baiwen and Dr Lj. Nikolic, in particular, and to Prof. Mitsuo Kono for motivating the work on this text. I wish to pay unique tribute to close friends and longtime collaborators, Prof. Dik ter Haar and Prof. Moma Jovanovic who are no longer with us. This report contains Chapter 1 (Strong Langmur Turbulence), Chapter 2 (Wave Collapse in Plasmas), Chapter 3 (Spatiotemporal Complexity in Plasmas), Chapter 4 (Relativistic Plasma Interactions) and Chapter 5 (Ponderomotive Potential and Magnetization). (J.P.N.)

Results of the radiological survey at the Firemen's Memorial Park and Fire Hall No. 2, Garibaldi Avenue and Kennedy Drive, Lodi, New Jersey (LJ066)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.; Crutcher, J.W.

1989-08-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of the gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, the Firemen's Memorial Park and Fire Hall number sign 2, Garibaldi Avenue and Kennedy Drive, Lodi, New Jersey (LJ066) was conducted during 1987. Results of the survey demonstrated radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions are typical of the type of material originating from the MCW site. 4 refs., 10 figs., 3 tabs

The occurrence and source identification of bisphenol compounds in wastewaters.

Science.gov (United States)

Česen, Marjeta; Lenarčič, Kaja; Mislej, Vesna; Levstek, Meta; Kovačič, Ana; Cimrmančič, Bernardka; Uranjek, Nataša; Kosjek, Tina; Heath, David; Dolenc, Marija Sollner; Heath, Ester

2018-03-01

This study reports the occurrence of eight bisphenols (BPs): bisphenol AF (BPAF), bisphenol AP (BPAP), bisphenol B (BPB), bisphenol C (BPC), bisphenol E (BPE), bisphenol F (BPF), bisphenol S (BPS) and bisphenol Z (BPZ) in wastewaters (WWs). Sample preparation involved pre-concentration with SPE cartridges (Oasis HLB), followed by derivatization using N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide with 1% tert-butyldimethylchlorosilane. Chemical analysis was based on gas chromatography-mass spectrometry. A validated method with limits of detection (LODs) at ngL -1 range was applied to WWs collected at five Slovene wastewater treatment plants (WWTPs) and WW inflows from industrial, commercial and residential sources entering the sewerage systems of two catchments (Domžale-Kamnik (DK) and Ljubljana (LJ)). The presence of all BPs was confirmed in three inflows in DK and two inflows in the LJ catchments. High cumulative concentrations of all BPs were determined in WW from food processing facilities (LJ: 3030ngL -1 and DK: 599ngL -1 ). A high detection frequency was observed in the WW from two textile cleaning companies (6 BPs for LJ and 8 BPs for DK). The analysis of WW from WWTPs revealed that only BPF (36.7ngL -1 ) and BPS (40.6ngL -1 ) were >LODs in the influents, whereas other BPs were detected also in the effluents. BPZ was found in the highest concentration (403ngL -1 at WWTP-DK). WW collected at this WWTP also contained the highest amount of BPE (238ngL -1 ). Although BPs removal could not be directly compared between the WWTPs, with the exception of BPAP and BPB in the case of two smaller WWTPs (6.39%-43.2%) bisphenols were in general highly removed (≥96.2%). Finally, levels of BPC>LOD are reported for first time (WWTP in the DK catchment: 1.01ngL -1 -11.8ngL -1 ; LJ inflow from food processing plant up to 2560ngL -1 ). Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

lJ •

African Journals Online (AJOL)

1974-06-15

Jun 15, 1974 ... a particular abnormality necessitates treatment. Strabismus is diagnosed ... Paralysis of movement of the extra-ocular muscles may indicate involvement ... such as pigmentary dystrophy, vessel attenuation more marked in the ...

Longevity of anterior resin-bonded bridges: survival rates of two tooth preparation designs.

Science.gov (United States)

Abuzar, M; Locke, J; Burt, G; Clausen, G; Escobar, K

2018-04-16

Significant developments have occurred in the design of resin-bonded bridges (RBB) over the past two decades. They are commonly used as an alternative treatment option for a single missing tooth. The longevity of these bridges needs to be further investigated to evaluate long-term outcomes for this option to remain relevant. A cohort of patients who received anterior resin-bonded bridges (ARBB) over two decades was studied retrospectively. Longevity of 206 ARBB was assessed using Kaplan-Meier probability estimates. The two modified tooth preparation designs investigated were: (A) mesial and distal vertical grooves only; and (B) one proximal groove adjacent to the pontic and two palatal grooves. Age and gender of the patient cohort were also recorded. Overall survival rate of ARBB was 98% at 5 years, 97.2% at 10 years, and 95.1% from 12 years till 21 years. Survival curves showed minor differences when compared for the two designs, age groups and gender of ARBB recipients. Differences in the proportion of surviving bridges for design A (95.96%) and design B (98.13%) were not statistically significant (Fisher's exact test). Anterior RBB with described tooth preparation designs demonstrate a high survival rate. © 2018 Australian Dental Association.

Mathematical simulation of fluid flow and analysis of flow pattern in the flow path of low-head Kaplan turbine

Directory of Open Access Journals (Sweden)

A. V. Rusanov

2016-12-01

Full Text Available The results of numerical investigation of spatial flow of viscous incompressible fluid in flow part of Kaplan turbine PL20 Kremenchug HPP at optimum setting angle of runner blade φb = 15° and at maximum setting angle φb = 35° are shown. The flow simulation has been carried out on basis of numerical integration of the Reynolds equations with an additional term containing artificial compressibility. The differential two-parameter model of Menter (SST has been applied to take into account turbulent effects. Numerical integration of the equations is carried out using an implicit quasi-monotone Godunov type scheme of second - order accuracy in space and time. The calculations have been conducted with the help of the software system IPMFlow. The analysis of fluid flow in the flow part elements is shown and the values of hydraulic losses and local cavitation coefficient have been obtained. Comparison of calculated and experimental results has been carried out.

Mitigation of tip vortex cavitation by means of air injection on a Kaplan turbine scale model

International Nuclear Information System (INIS)

Rivetti, A; Angulo, M; Lucino, C; Liscia, S

2014-01-01

Kaplan turbines operating at full-load conditions may undergo excessive vibration, noise and cavitation. In such cases, damage by erosion associated to tip vortex cavitation can be observed at the discharge ring. This phenomenon involves design features such as (1) overhang of guide vanes; (2) blade profile; (3) gap increasing size with blade opening; (4) suction head; (5) operation point; and (6) discharge ring stiffness, among others. Tip vortex cavitation may cause erosion at the discharge ring and draft tube inlet following a wavy pattern, in which the number of vanes can be clearly identified. Injection of pressurized air above the runner blade centerline was tested as a mean to mitigate discharge ring cavitation damage on a scale model. Air entrance was observed by means of a high-speed camera in order to track the air trajectory toward its mergence with the tip vortex cavitation core. Post-processing of acceleration signals shows that the level of vibration and the RSI frequency amplitude decrease proportionally with air flow rate injected. These findings reveal the potential mitigating effect of air injection in preventing cavitation damage and will be useful in further tests to be performed on prototype, aiming at determining the optimum air flow rate, size and distribution of the injectors

Mitigation of tip vortex cavitation by means of air injection on a Kaplan turbine scale model

Science.gov (United States)

Rivetti, A.; Angulo, M.; Lucino, C.; Liscia, S.

2014-03-01

Kaplan turbines operating at full-load conditions may undergo excessive vibration, noise and cavitation. In such cases, damage by erosion associated to tip vortex cavitation can be observed at the discharge ring. This phenomenon involves design features such as (1) overhang of guide vanes; (2) blade profile; (3) gap increasing size with blade opening; (4) suction head; (5) operation point; and (6) discharge ring stiffness, among others. Tip vortex cavitation may cause erosion at the discharge ring and draft tube inlet following a wavy pattern, in which the number of vanes can be clearly identified. Injection of pressurized air above the runner blade centerline was tested as a mean to mitigate discharge ring cavitation damage on a scale model. Air entrance was observed by means of a high-speed camera in order to track the air trajectory toward its mergence with the tip vortex cavitation core. Post-processing of acceleration signals shows that the level of vibration and the RSI frequency amplitude decrease proportionally with air flow rate injected. These findings reveal the potential mitigating effect of air injection in preventing cavitation damage and will be useful in further tests to be performed on prototype, aiming at determining the optimum air flow rate, size and distribution of the injectors.

À LA RECHERCHE DES FONDEMENTS CONCEPTUELS ET METHODOLOGIQUES DU BALANCED SCORECARD : LE MODELE DE KAPLAN ET NORTON REVISITÉ À TRAVERS LE CADRE CONCEPTUEL DES LEVIERS DE CONTROLE.

OpenAIRE

Gérald Naro; Denis Travaillé

2009-01-01

International audience; The aim of this paper is to confront the Balanced Scorecard (BSC) with Simons' (1995) levers of control framework and to discuss its role in the various stages of the strategic process. Whereas Kaplan and Norton present the BSC above all as a system of diagnostic control, Simons' (1995) levers of control model leads us to privilege a representation of the BSC in the form of an interactive process. Such an approach presents several theoretical and methodological implica...

A method to combine hydrodynamics and constructive design in the optimization of the runner blades of Kaplan turbines

International Nuclear Information System (INIS)

Miclosina, C O; Balint, D I; Campian, C V; Frunzaverde, D; Ion, I

2012-01-01

This paper deals with the optimization of the axial hydraulic turbines of Kaplan type. The optimization of the runner blade is presented systematically from two points of view: hydrodynamic and constructive. Combining these aspects in order to gain a safer operation when unsteady effects occur in the runner of the turbine is attempted. The design and optimization of the runner blade is performed with QTurbo3D software developed at the Center for Research in Hydraulics, Automation and Thermal Processes (CCHAPT) from 'Eftimie Murgu' University of Resita, Romania. QTurbo3D software offers possibilities to design the meridian channel of hydraulic turbines design the blades and optimize the runner blade. 3D modeling and motion analysis of the runner blade operating mechanism are accomplished using SolidWorks software. The purpose of motion study is to obtain forces, torques or stresses in the runner blade operating mechanism, necessary to estimate its lifetime. This paper clearly states the importance of combining the hydrodynamics with the structural design in the optimization procedure of the runner of hydraulic turbines.

A method to combine hydrodynamics and constructive design in the optimization of the runner blades of Kaplan turbines

Science.gov (United States)

Miclosina, C. O.; Balint, D. I.; Campian, C. V.; Frunzaverde, D.; Ion, I.

2012-11-01

This paper deals with the optimization of the axial hydraulic turbines of Kaplan type. The optimization of the runner blade is presented systematically from two points of view: hydrodynamic and constructive. Combining these aspects in order to gain a safer operation when unsteady effects occur in the runner of the turbine is attempted. The design and optimization of the runner blade is performed with QTurbo3D software developed at the Center for Research in Hydraulics, Automation and Thermal Processes (CCHAPT) from "Eftimie Murgu" University of Resita, Romania. QTurbo3D software offers possibilities to design the meridian channel of hydraulic turbines design the blades and optimize the runner blade. 3D modeling and motion analysis of the runner blade operating mechanism are accomplished using SolidWorks software. The purpose of motion study is to obtain forces, torques or stresses in the runner blade operating mechanism, necessary to estimate its lifetime. This paper clearly states the importance of combining the hydrodynamics with the structural design in the optimization procedure of the runner of hydraulic turbines.

How Do Executive Functions Fit with the Cattell-Horn-Carroll Model? Some Evidence from a Joint Factor Analysis of the Delis-Kaplan Executive Function System and the Woodcock-Johnson III Tests of Cognitive Abilities

Science.gov (United States)

Floyd, Randy G.; Bergeron, Renee; Hamilton, Gloria; Parra, Gilbert R.

2010-01-01

This study investigated the relations among executive functions and cognitive abilities through a joint exploratory factor analysis and joint confirmatory factor analysis of 25 test scores from the Delis-Kaplan Executive Function System and the Woodcock-Johnson III Tests of Cognitive Abilities. Participants were 100 children and adolescents…

Dicty_cDB: Contig-U04327-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available 05, 5' en... 52 3e-04 2 ( BI420470 ) LjNEST57e11r Lotus japonicus nodule library ...5 and... 52 3e-04 2 ( BI417687 ) LjNEST34c3r Lotus japonicus nodule library 5 and ... 52 3e-04 2 ( BI418582 ) LjNEST43d6r Lotu...s japonicus nodule library 5 and ... 52 3e-04 2 ( BI419267 ) LjNEST44c8r Lotus japonicus nodule library... 5 and ... 52 3e-04 2 ( BI419149 ) LjNEST35h6r Lotus japonicus nodule library 5 and ... 52 3e-0... cDNA clone SOYBE... 48 0.50 1 ( BQ606814 ) BRY_2689 wheat EST endosperm library Triticu

Expression and purification of Nod factor receptors - Initial characterization of ligand binding

DEFF Research Database (Denmark)

Broghammer, Angelique

Carbohydrate signals have been shown to regulate defence, growth and development in plants. Decorated chitin molecules, lipochitooligosaccharides, synthesized and secreted by rhizobia are the major signal molecules initiating the plant processes establishing legume-rhizobia symbiosis. Lipochitool......Carbohydrate signals have been shown to regulate defence, growth and development in plants. Decorated chitin molecules, lipochitooligosaccharides, synthesized and secreted by rhizobia are the major signal molecules initiating the plant processes establishing legume-rhizobia symbiosis...... and LjNFR5 ectodomains were glycosylated; 3) LjNFR1 retained its in vitro kinase activity and 4) LjNFR1 and LjNFR5 were localized to the plasma membrane. In depth mass spectroscopy analysis of the N-glycan structure of LjNFR5 resulted in identification of two different glycan structures with identical...

Inherent work suit buoyancy distribution: effects on lifejacket self-righting performance.

Science.gov (United States)

Barwood, Martin J; Long, Geoffrey M; Lunt, Heather; Tipton, Michael J

2014-09-01

Accidental immersion in cold water is an occupational risk. Work suits and life jackets (LJ) should work effectively in combination to keep the airway clear of the water (freeboard) and enable self-righting. We hypothesized that inherent buoyancy, in the suit or LJ, would be beneficial for enabling freeboard, but its distribution may influence LJ self-righting. Six participants consented to complete nine immersions. Suits and LJ tested were: flotation suit (FLOAT; 85 N inherent buoyancy); oilskins 1 (OS-1) and 2 (OS-2), both with no inherent buoyancy; LJs (inherent buoyancy/buoyancy after inflation/total buoyancy), LJ-1 50/150/200 N, LJ-2 0/290/290 N, LJ-3 80/190/270 N. Once dressed, the subject entered an immersion pool where uninflated freeboard, self-righting performance, and inflated freeboard were measured. Data were compared using Friedman's test to the 0.05 alpha level. All suits and LJs enabled uninflated and inflated freeboard, but differences were seen between the suits and LJs. Self-righting was achieved on 43 of 54 occasions, irrespective of suit or LJ. On all occasions that self-righting was not achieved, this occurred in an LJ that included inherent buoyancy (11/54 occasions). Of these 11 failures, 8 occurred (73% of occasions) when the FLOAT suit was being worn. LJs that included inherent buoyancy, that are certified as effective on their own, worked less effectively from the perspective of self-righting in combination with a work suit that also included inherent buoyancy. Equipment that is approved for use in the workplace should be tested in combination to ensure adequate performance in an emergency scenario.

Results of the radiological survey of the Saddle River's East Bank, from State Highway 46 to the River's confluence with Lodi Brook, Lodi, New Jersey (LJ083)

International Nuclear Information System (INIS)

Foley, R.D.; Floyd, L.M.

1989-11-01

Maywood Chemical Works (MCW) of Maywood, New Jersey, generated process wastes and residues associated with the production and refining of thorium and thorium compounds from monazite ores from 1916 to 1956. MCW supplied rare earth metals and thorium compounds to the Atomic Energy Commission and various other government agencies from the late 1940s to the mid-1950s. Area residents used the sandlike waste from this thorium extraction process mixed with tea and cocoa leaves as mulch in their yards. Some of these contaminated wastes were also eroded from the site into Lodi Brook. At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducts investigative radiological surveys of properties in the vicinity of MCW to determine whether a property is contaminated with radioactive residues, principally 232 Th, derived from the MCW site. The survey typically includes direct measurement of gamma radiation levels and soil sampling for radionuclide analyses. The survey of this site, the Saddle River's East Bank, from State Highway 46 to the River's Confluence with Lodi Brook, Lodi, New Jersey (LJ083), was conducted during 1988. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program criteria. The radionuclide distributions were not significantly different from normal background levels in the northern New Jersey area. 4 refs., 2 figs., 3 tabs

Two putative-aquaporin genes are differentially expressed during arbuscular mycorrhizal symbiosis in Lotus japonicus

Directory of Open Access Journals (Sweden)

Giovannetti Marco

2012-10-01

Full Text Available Abstract Background Arbuscular mycorrhizas (AM are widespread symbioses that provide great advantages to the plant, improving its nutritional status and allowing the fungus to complete its life cycle. Nevertheless, molecular mechanisms that lead to the development of AM symbiosis are not yet fully deciphered. Here, we have focused on two putative aquaporin genes, LjNIP1 and LjXIP1, which resulted to be upregulated in a transcriptomic analysis performed on mycorrhizal roots of Lotus japonicus. Results A phylogenetic analysis has shown that the two putative aquaporins belong to different functional families: NIPs and XIPs. Transcriptomic experiments have shown the independence of their expression from their nutritional status but also a close correlation with mycorrhizal and rhizobial interaction. Further transcript quantification has revealed a good correlation between the expression of one of them, LjNIP1, and LjPT4, the phosphate transporter which is considered a marker gene for mycorrhizal functionality. By using laser microdissection, we have demonstrated that one of the two genes, LjNIP1, is expressed exclusively in arbuscule-containing cells. LjNIP1, in agreement with its putative role as an aquaporin, is capable of transferring water when expressed in yeast protoplasts. Confocal analysis have demonstrated that eGFP-LjNIP1, under its endogenous promoter, accumulates in the inner membrane system of arbusculated cells. Conclusions Overall, the results have shown different functionality and expression specificity of two mycorrhiza-inducible aquaporins in L. japonicus. One of them, LjNIP1 can be considered a novel molecular marker of mycorrhizal status at different developmental stages of the arbuscule. At the same time, LjXIP1 results to be the first XIP family aquaporin to be transcriptionally regulated during symbiosis.

Inability of Kaplan radiation leukemia virus to replicate on mouse fibroblasts is conferred by its long terminal repeat

International Nuclear Information System (INIS)

Rassart, E.; Paquette, Y.; Jolicoeur, P.

1988-01-01

The molecularly cloned infectious Kaplan radiation leukemia virus has previously been shown to be unable to replicate on mouse fibroblasts. To map the viral sequences responsible for this, we constructed chimeric viral DNA genomes in vitro with parental cloned infectious viral DNAs from the nonfibrotropic (F-) BL/VL3 V-13 radiation leukemia virus and the fibrotropic (F+) endogenous BALB/c or Moloney murine leukemia viruses (MuLV). Infectious chimeric MuLVs, recovered after transfection of Ti-6 lymphocytes with these recombinant DNAs, were tested for capacity to replicate on mouse fibroblasts in vitro. We found that chimeric MuLVs harboring the long terminal repeat (LTR) of a fibrotropic MuLV replicated well on mouse fibroblasts. Conversely, chimeric MuLVs harboring the LTR of a nonfibrotropic MuLV were restricted on mouse fibroblasts. These results indicate that the LTR of BL/VL3 radiation leukemia virus harbors the primary determinant responsible for its inability to replicate on mouse fibroblasts in vitro. Our results also show that the primary determinant allowing F+ MuLVs (endogenous BALB/c and Moloney MuLVs) to replicate on mouse fibroblasts in vitro resides within the LTR

Excipient-assisted vinpocetine nanoparticles: experiments and molecular dynamic simulations.

Science.gov (United States)

Li, Cai-Xia; Wang, Hao-Bo; Oppong, Daniel; Wang, Jie-Xin; Chen, Jian-Feng; Le, Yuan

2014-11-03

Hydrophilic excipients can be used to increase the solubility and bioavailability of poorly soluble drugs. In this work, the conventional water-soluble pharmaceutical excipients hydroxypropylmethylcellulose (HPMC), polyvinylpyrrolidone (PVP), and lactose (LAC) were used as solid supports to prevent drug nanoparticles from aggregation and enhance drug dissolution. Excipient-assisted vinpocetine (VIN) nanoparticles were prepared by reactive precipitation. The analysis results indicated that HPMC was a suitable excipient to prepare VIN nanoparticles. VIN/HPMC nanoparticles had a mean size of 130 nm within a narrow distribution. The dissolution rate of VIN nanoparticles was significantly faster than those of a physical mixture of VIN/HPMC and raw VIN. VIN/HPMC nanoparticles had a higher dissolution profile than VIN/PVP and VIN/LAC nanoparticles. Besides, molecular dynamics (MD) simulation was applied to investigate the molecular interactions between VIN and excipients. The calculated results revealed that VIN interacted with excipients by Coulomb and Lennard-Jones (LJ) interactions. Few hydrogen bonds were formed between VIN and excipients. The HPMC affording smaller particle size may be a result of the stronger interactions between VIN and HPMC (mainly LJ interaction) and the property of HPMC. These characteristics may greatly influence the adsorption behavior and may be the crucial parameter for the better performance of HPMC.

Enhanced secondary analysis of survival data: reconstructing the data from published Kaplan-Meier survival curves.

Science.gov (United States)

Guyot, Patricia; Ades, A E; Ouwens, Mario J N M; Welton, Nicky J

2012-02-01

The results of Randomized Controlled Trials (RCTs) on time-to-event outcomes that are usually reported are median time to events and Cox Hazard Ratio. These do not constitute the sufficient statistics required for meta-analysis or cost-effectiveness analysis, and their use in secondary analyses requires strong assumptions that may not have been adequately tested. In order to enhance the quality of secondary data analyses, we propose a method which derives from the published Kaplan Meier survival curves a close approximation to the original individual patient time-to-event data from which they were generated. We develop an algorithm that maps from digitised curves back to KM data by finding numerical solutions to the inverted KM equations, using where available information on number of events and numbers at risk. The reproducibility and accuracy of survival probabilities, median survival times and hazard ratios based on reconstructed KM data was assessed by comparing published statistics (survival probabilities, medians and hazard ratios) with statistics based on repeated reconstructions by multiple observers. The validation exercise established there was no material systematic error and that there was a high degree of reproducibility for all statistics. Accuracy was excellent for survival probabilities and medians, for hazard ratios reasonable accuracy can only be obtained if at least numbers at risk or total number of events are reported. The algorithm is a reliable tool for meta-analysis and cost-effectiveness analyses of RCTs reporting time-to-event data. It is recommended that all RCTs should report information on numbers at risk and total number of events alongside KM curves.

Enhanced secondary analysis of survival data: reconstructing the data from published Kaplan-Meier survival curves

Directory of Open Access Journals (Sweden)

Guyot Patricia

2012-02-01

Full Text Available Abstract Background The results of Randomized Controlled Trials (RCTs on time-to-event outcomes that are usually reported are median time to events and Cox Hazard Ratio. These do not constitute the sufficient statistics required for meta-analysis or cost-effectiveness analysis, and their use in secondary analyses requires strong assumptions that may not have been adequately tested. In order to enhance the quality of secondary data analyses, we propose a method which derives from the published Kaplan Meier survival curves a close approximation to the original individual patient time-to-event data from which they were generated. Methods We develop an algorithm that maps from digitised curves back to KM data by finding numerical solutions to the inverted KM equations, using where available information on number of events and numbers at risk. The reproducibility and accuracy of survival probabilities, median survival times and hazard ratios based on reconstructed KM data was assessed by comparing published statistics (survival probabilities, medians and hazard ratios with statistics based on repeated reconstructions by multiple observers. Results The validation exercise established there was no material systematic error and that there was a high degree of reproducibility for all statistics. Accuracy was excellent for survival probabilities and medians, for hazard ratios reasonable accuracy can only be obtained if at least numbers at risk or total number of events are reported. Conclusion The algorithm is a reliable tool for meta-analysis and cost-effectiveness analyses of RCTs reporting time-to-event data. It is recommended that all RCTs should report information on numbers at risk and total number of events alongside KM curves.

Quality assessment and anti-obesity activity of Stellaria media (Linn. Vill

Directory of Open Access Journals (Sweden)

Rani Neerja

2012-09-01

Full Text Available Abstract Background Obesity is recognized as a social problem, associated with serious health risks and increased mortality. Numerous trials have been conducted to find and develop new anti-obesity drugs through herbal sources to minimize side effects associated with the present anti-obesity drugs. The present study was designed to evaluate the quality control parameters, quantitative phytochemical analysis (total phenolic, total flavonoids and total saponin content, and the anti-obesity effect of lyophilized juice (LJ of Stellaria media (Linn. Vill. by employing in vitro and in vivo models. Methods In vitro studies were performed to evaluate the inhibitory activity of LJ on pancreatic amylase and lipase. The in vivo pancreatic lipase activity was evaluated by measurement of plasma triacylglycerol levels after oral administration of lipid emulsion to swiss albino mice. Furthermore, the anti-obesity effect of LJ was assessed at two doses, 400 mg/kg and 900 mg/kg body weight in mice fed a high-fat-diet with or without LJ for 6 weeks. Results The LJ inhibited pancreatic amylase and lipase activity in vitro and elevated plasma triacylglycerol level in mice. LJ suppressed the increase in body weight, retroperitoneal adipose tissue, liver weights and serum parameters viz., total cholesterol, total triglyceride, LDL-cholesterol level at the dose of 900 mg/kg body weight of the mice fed with high fat diet. The total phenolic, flavonoid and saponin contents were found to be 0.26 mg/g, 1.4 mg/g and 1.19 μg/g respectively of LJ. Conclusion The anti-obesity effects of LJ in high-fat-diet fed mice may be partly mediated through delaying the intestinal absorption of dietary fat and carbohydrate by inhibiting digestive enzymes.

Developing Inhibitors of Ovarian Cancer Progression by Targeted Disruption of the Gamma-Synuclein Activated Migratory and Survival Signaling Pathways

Science.gov (United States)

2007-04-01

Golub TR. A molecular signature of metastasis in primary solid tumors. Nat Gene 2003;33:49–54. 2. van’t Verr LJ, Dai H, van de Vijver MJ, et al. Gene...Philadelphia, Pennsylvania 19111 REPORT DATE: April 2007 TYPE OF REPORT: Final PREPARED FOR: U.S. Army Medical Research and... TYPE Final 3. DATES COVERED (From - To) 1 Apr 2003 – 31 Mar 2007 4. TITLE AND SUBTITLE 5a. CONTRACT NUMBER Developing Inhibitors of Ovarian

The comparative analysis of the current-meter method and the pressure-time method used for discharge measurements in the Kaplan turbine penstocks

Science.gov (United States)

Adamkowski, A.; Krzemianowski, Z.

2012-11-01

The paper presents experiences gathered during many years of utilizing the current-meter and pressure-time methods for flow rate measurements in many hydropower plants. The integration techniques used in these both methods are different from the recommendations contained in the relevant international standards, mainly from the graphical and arithmetical ones. The results of the comparative analysis of both methods applied at the same time during the hydraulic performance tests of two Kaplan turbines in one of the Polish hydropower plant are presented in the final part of the paper. In the case of the pressure-time method application, the concrete penstocks of the tested turbines required installing a special measuring instrumentation inside the penstock. The comparison has shown a satisfactory agreement between the results of discharge measurements executed using the both considered methods. Maximum differences between the discharge values have not exceeded 1.0 % and the average differences have not been greater than 0.5 %.

The comparative analysis of the current-meter method and the pressure-time method used for discharge measurements in the Kaplan turbine penstocks

International Nuclear Information System (INIS)

Adamkowski, A; Krzemianowski, Z

2012-01-01

The paper presents experiences gathered during many years of utilizing the current-meter and pressure-time methods for flow rate measurements in many hydropower plants. The integration techniques used in these both methods are different from the recommendations contained in the relevant international standards, mainly from the graphical and arithmetical ones. The results of the comparative analysis of both methods applied at the same time during the hydraulic performance tests of two Kaplan turbines in one of the Polish hydropower plant are presented in the final part of the paper. In the case of the pressure-time method application, the concrete penstocks of the tested turbines required installing a special measuring instrumentation inside the penstock. The comparison has shown a satisfactory agreement between the results of discharge measurements executed using the both considered methods. Maximum differences between the discharge values have not exceeded 1.0 % and the average differences have not been greater than 0.5 %.

A versatile test for equality of two survival functions based on weighted differences of Kaplan-Meier curves.

Science.gov (United States)

Uno, Hajime; Tian, Lu; Claggett, Brian; Wei, L J

2015-12-10

With censored event time observations, the logrank test is the most popular tool for testing the equality of two underlying survival distributions. Although this test is asymptotically distribution free, it may not be powerful when the proportional hazards assumption is violated. Various other novel testing procedures have been proposed, which generally are derived by assuming a class of specific alternative hypotheses with respect to the hazard functions. The test considered by Pepe and Fleming (1989) is based on a linear combination of weighted differences of the two Kaplan-Meier curves over time and is a natural tool to assess the difference of two survival functions directly. In this article, we take a similar approach but choose weights that are proportional to the observed standardized difference of the estimated survival curves at each time point. The new proposal automatically makes weighting adjustments empirically. The new test statistic is aimed at a one-sided general alternative hypothesis and is distributed with a short right tail under the null hypothesis but with a heavy tail under the alternative. The results from extensive numerical studies demonstrate that the new procedure performs well under various general alternatives with a caution of a minor inflation of the type I error rate when the sample size is small or the number of observed events is small. The survival data from a recent cancer comparative study are utilized for illustrating the implementation of the process. Copyright © 2015 John Wiley & Sons, Ltd.

Dicty_cDB: Contig-U01335-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available 24 2.2 4 ( AW720069 ) LjNEST13d1r Lotus japonicus nodule library 5 and ... 36 2.2 2 ( AZ549980 ) ENTDD94TF Entamoeba histolytic...0053 Schistosoma manso... 36 3.3 2 ( BI417856 ) LjNEST37h10r Lotus japonicus nodule library 5 and... 36 3.4 ...2 ( BI417355 ) LjNEST38c2r Lotus japonicus nodule library 5 and ... 36 3.4 2 ( CG...ple Tissues, Normaliz... 34 3.5 2 ( CB828239 ) LjNEST84d3r Lotus japonicus nodule library 5 and ......077 3 ( CX198414 ) ydf29b11.y1 Sea urchin EST Lib1 Strongylocentrotu... 36 0.082 3 ( EE049942 ) zf_003_A10 Developmental library

Thin-layer agar (TL7H11 for rapid isolation of Mycobacterium tuberculosis in sputum specimens

Directory of Open Access Journals (Sweden)

Habiba Binte Alam

2016-08-01

Full Text Available Background: Tuberculosis (TB remains one of the major causes of death from a single infectious agent worldwide. The early detection of new cases of pulmonary tuberculosis is an important goal in tuberculosis control program.Objective: 1n this study, thin layer agar (TLA culture was compared with Lowenstein-Jensen (LJ culture for rapid detection of pulmonary tuberculosis. Methods: It was a cross sectional study conducted in National Tuberculosis Reference Labora­tory (NTRL of National Institute of Disease of Chest and Hospital (NIDCH, Dhaka, from July 2010 to June 2011. A total of 100 sputum smear positive for acid fast bacilli (AFB by Z-N staining, pulmonary tuberculosis patients were included in this study. Samples were processed by modified Petroff method and then cultured on thin layer 7H11(TL7H11 plates and L-J tubes. TL7H11 plates were observed microscopically for rnicrocolony growth once a week for 6 weeks, and L-J tubes were observed once a week for 8 weeks. Results: The recovery rates of mycobacteria on only TLA, only LJ and on both media were 90%, 97% and 88% respectively. Overall positivity was 99% in both L-J and TLA media. Mean time for detection of mycobacteria on TLA was 9.04±1.66 days compared to 21.78±6.19 days on L-J media. The rate of contamination was higher (6% in L-J media than in TLA media (4%. Conclusion: The TL7H11 media can be used as an alternative to the Lowenstein-Jensen medium for early isolation of mycobacteria in resource constrained settings.

Comparative Physiological and Molecular Analyses of Two Contrasting Flue-Cured Tobacco Genotypes under Progressive Drought Stress

Directory of Open Access Journals (Sweden)

Xinhong Su

2017-05-01

Full Text Available Drought is a major environmental factor that limits crop growth and productivity. Flue-cured tobacco (Nicotiana tabacum is one of the most important commercial crops worldwide and its productivity is vulnerable to drought. However, comparative analyses of physiological, biochemical and gene expression changes in flue-cured tobacco varieties differing in drought tolerance under long-term drought stress are scarce. In this study, drought stress responses of two flue-cured tobacco varieties, LJ851 and JX6007, were comparatively studied at the physiological and transcriptional levels. After exposing to progressive drought stress, the drought-tolerant LJ851 showed less growth inhibition and chlorophyll reduction than the drought-sensitive JX6007. Moreover, higher antioxidant enzyme activities and lower levels of H2O2, Malondialdehyde (MDA, and electrolyte leakage after drought stress were found in LJ851 when compared with JX6007. Further analysis showed that LJ851 plants had much less reductions than the JX6007 in the net photosynthesis rate and stomatal conductance during drought stress; indicating that LJ851 had better photosynthetic performance than JX6007 during drought. In addition, transcriptional expression analysis revealed that LJ851 exhibited significantly increased transcripts of several categories of drought-responsive genes in leaves and roots under drought conditions. Together, these results indicated that LJ851 was more drought-tolerant than JX6007 as evidenced by better photosynthetic performance, more powerful antioxidant system, and higher expression of stress defense genes during drought stress. This study will be valuable for the development of novel flue-cured tobacco varieties with improved drought tolerance by exploitation of natural genetic variations in the future.

Mitigación de la cavitación de extremo de alabe mediante la implementación de inyección de aire en un modelo a escala reducida de turbina Kaplan

OpenAIRE

Rivetti, Arturo; Angulo, Mauricio Abel; Lucino, Cecilia Verónica; Liscia, Sergio Oscar

2015-01-01

Las Turbinas Kaplan que operan en condiciones de alta carga pueden estar sometidas a vibraciones excesivas, ruido y cavitación. En estos casos puede presentarse erosión por cavitación sobre el anillo de descarga asociada al desarrollo de cavitación de extremo de alabe. Este fenómeno involucra características de diseño tales como sobreapertura de los alabes del distribuidor; perfil de los alabes del rodete; el incremento del huelgo debido a la apertura del alabe; la altura neta de aspiración; ...

Fatigue Analysis of the Piston Rod in a Kaplan Turbine Based on Crack Propagation under Unsteady Hydraulic Loads

International Nuclear Information System (INIS)

Liu, X; Luo, Y Y; Wang, Z W

2014-01-01

As an important component of the blade-control system in Kaplan turbines, piston rods are subjected to fluctuating forces transferred by the turbines blades from hydraulic pressure oscillations. Damage due to unsteady hydraulic loads might generate unexpected down time and high repair cost. In one running hydropower plant, the fracture failure of the piston rod was found twice at the same location. With the transient dynamic analysis, the retainer ring structure of the piston rod existed a relative high stress concentration. This predicted position of the stress concentration agreed well with the actual fracture position in the plant. However, the local strain approach was not able to explain why this position broke frequently. Since traditional structural fatigue analyses use a local stress strain approach to assess structural integrity, do not consider the effect of flaws which can significantly degrade structural life. Using linear elastic fracture mechanism (LEFM) approaches that include the effect of flaws is becoming common practice in many industries. In this research, a case involving a small semi-ellipse crack was taken into account at the stress concentration area, crack growth progress was calculated by FEM. The relationship between crack length and remaining life was obtained. The crack propagation path approximately agreed with the actual fracture section. The results showed that presence of the crack had significantly changed the local stress and strain distributions of the piston rod compared with non-flaw assumption

Fatigue Analysis of the Piston Rod in a Kaplan Turbine Based on Crack Propagation under Unsteady Hydraulic Loads

Science.gov (United States)

Liu, X.; Y Luo, Y.; Wang, Z. W.

2014-03-01

As an important component of the blade-control system in Kaplan turbines, piston rods are subjected to fluctuating forces transferred by the turbines blades from hydraulic pressure oscillations. Damage due to unsteady hydraulic loads might generate unexpected down time and high repair cost. In one running hydropower plant, the fracture failure of the piston rod was found twice at the same location. With the transient dynamic analysis, the retainer ring structure of the piston rod existed a relative high stress concentration. This predicted position of the stress concentration agreed well with the actual fracture position in the plant. However, the local strain approach was not able to explain why this position broke frequently. Since traditional structural fatigue analyses use a local stress strain approach to assess structural integrity, do not consider the effect of flaws which can significantly degrade structural life. Using linear elastic fracture mechanism (LEFM) approaches that include the effect of flaws is becoming common practice in many industries. In this research, a case involving a small semi-ellipse crack was taken into account at the stress concentration area, crack growth progress was calculated by FEM. The relationship between crack length and remaining life was obtained. The crack propagation path approximately agreed with the actual fracture section. The results showed that presence of the crack had significantly changed the local stress and strain distributions of the piston rod compared with non-flaw assumption.

Glass of monatomic Lennard-Jones system at nanoscale

International Nuclear Information System (INIS)

Vo Van Hoang

2010-01-01

Structure and stability of glass of monatomic Lennard-Jones (LJ) system at nanoscale compared with those of the bulk counterparts have been studied using the classical molecular dynamics (MD) method. Models have been obtained by cooling from the melts. Structure of the systems was analyzed via radial distribution function (RDF), interatomic distances, the Honeycutt-Andersen analysis and coordination number distributions. Surface and core structures of LJ nanoparticles have been analyzed in details. Density dependence and cooling rate effects on structure of the systems have been found and discussed. In addition, size dependence of structure and properties of nanoparticles has been analyzed in detail. Indeed, we found glass formation in monatomic LJ systems; however, their stability is not high. Evolution of structure and thermodynamics of the systems upon cooling from the melts was found. We also discussed annealing-induced crystallization of LJ glass.

Linking Action Learning and Inter-Organisational Learning: The Learning Journey Approach

Science.gov (United States)

Schumacher, Thomas

2015-01-01

The article presents and illustrates the learning journey (LJ)--a new management development approach to inter-organisational learning based on observation, reflection and problem-solving. The LJ involves managers from different organisations and applies key concepts of action learning and systemic organisational development. Made up of…

Identification and characterisation of ROS modulator 1 in Lampetra japonica.

Science.gov (United States)

Zhao, Chunhui; Feng, Bin; Cao, Ying; Xie, Peng; Xu, Jie; Pang, Yue; Liu, Xin; Li, Qingwei

2013-08-01

Reactive oxygen species (ROS) are a heterogeneous group of highly reactive molecules that oxidise targets in biological systems. ROS are also considered important immune regulators. In this study, we identified a homologue of reactive oxygen species modulator 1 (Romo1) in the Japanese lamprey (Lampetra japonica). The L japonica Romo1 (Lj-Romo1) gene shares high sequence homology with the Romo1 genes of jawed vertebrates. Real-time quantitative PCR demonstrated the wide distribution of Lj-Romo1 in lamprey tissues. Furthermore, after the lampreys were stimulated with lipopolysaccharide (LPS), the level of Lj-Romo1 mRNA was markedly up-regulated in the liver, gill, kidney, and intestine tissues. Lj-Romo1 was localised to the mitochondria and has the capacity to increase the ROS level in cells. The results obtained in the present study will help us to understand the roles of Romo1 in ROS production and innate immune responses in jawless vertebrates. Copyright © 2013 Elsevier Ltd. All rights reserved.

A model-adaptivity method for the solution of Lennard-Jones based adhesive contact problems

Science.gov (United States)

Ben Dhia, Hachmi; Du, Shuimiao

2018-05-01

The surface micro-interaction model of Lennard-Jones (LJ) is used for adhesive contact problems (ACP). To address theoretical and numerical pitfalls of this model, a sequence of partitions of contact models is adaptively constructed to both extend and approximate the LJ model. It is formed by a combination of the LJ model with a sequence of shifted-Signorini (or, alternatively, -Linearized-LJ) models, indexed by a shift parameter field. For each model of this sequence, a weak formulation of the associated local ACP is developed. To track critical localized adhesive areas, a two-step strategy is developed: firstly, a macroscopic frictionless (as first approach) linear-elastic contact problem is solved once to detect contact separation zones. Secondly, at each shift-adaptive iteration, a micro-macro ACP is re-formulated and solved within the multiscale Arlequin framework, with significant reduction of computational costs. Comparison of our results with available analytical and numerical solutions shows the effectiveness of our global strategy.

The prophages of Lactobacillus johnsonii NCC 533: comparative genomics and transcription analysis

International Nuclear Information System (INIS)

Ventura, Marco; Canchaya, Carlos; Pridmore, R. David; Bruessow, Harald

2004-01-01

Two non-inducible, but apparently complete prophages were identified in the genome of the sequenced Lactobacillus johnsonii strain NCC 533. The 38- and 40-kb-long prophages Lj928 and Lj965 represent distinct lineages of Sfi11-like pac-site Siphoviridae unrelated at the DNA sequence level. The deduced structural proteins from Lj928 demonstrated aa sequence identity with Lactococcus lactis phage TP901-1, while Lj965 shared sequence links with Streptococcus thermophilus phage O1205. With the exception of tRNA genes, inserted between DNA replication and DNA packaging genes, the transcription of the prophage was restricted to the genome segments near both attachment sites. Transcribed genes unrelated to phage functions were inserted between the phage repressor and integrase genes; one group of genes shared sequence relatedness with a mobile DNA element in Staphylococcus aureus. A short, but highly transcribed region was located between the phage lysin and right attachment site; it lacked a protein-encoding function in one prophage

A full three dimensional Navier-Stokes numerical simulation of flow field inside a power plant Kaplan turbine using some model test turbine hill chart points

Science.gov (United States)

Hosseinalipour, S. M.; Raja, A.; Hajikhani, S.

2012-06-01

A full three dimensional Navier - Stokes numerical simulation has been performed for performance analysis of a Kaplan turbine which is installed in one of the Irans south dams. No simplifications have been enforced in the simulation. The numerical results have been evaluated using some integral parameters such as the turbine efficiency via comparing the results with existing experimental data from the prototype Hill chart. In part of this study the numerical simulations were performed in order to calculate the prototype turbine efficiencies in some specific points which comes from the scaling up of the model efficiency that are available in the model experimental Hill chart. The results are very promising which shows the good ability of the numerical techniques for resolving the flow characteristics in these kind of complex geometries. A parametric study regarding the evaluation of turbine performance in three different runner angles of the prototype is also performed and the results are cited in this paper.

Flexible equation of state for a hard sphere and Lennard–Jones fluid ...

Indian Academy of Sciences (India)

Equation of state; Lennard–Jones potential; hard-sphere potential; liquid mixture; computer simulation. ... deviation than Barker–Henderson BH2 for LJ fluids, and results are much closer to molecular dynamics (MD) simulations than expectations and reproduce the existing simulation data and present EoS for LJ potential, ...

3D quantification of clinical marginal and internal gap of porcelain laminate veneers with minimal and without tooth preparation and 2-year clinical evaluation.

Science.gov (United States)

Karagözoğlu, İrem; Toksavul, Suna; Toman, Muhittin

2016-01-01

The aims of this clinical study were to compare internal three-dimensional (3D) adaptation of porcelain laminate veneers (PLV) with minimal tooth preparation and without tooth preparation (prepless) and to evaluate the clinical outcomes at baseline and following 6, 12, and 24 months after luting. Thirty-one prepless PLV and 31 PLV with minimal tooth preparation were fabricated using lithium disilicate glass-ceramic material and placed in 12 patients (8 women, 4 men; 18 to 40 years old). All PLV were luted with an adhesive luting system (Variolink veneer). A silicone replica was obtained to measure internal adaptation of each PLV using a low viscosity polyvinyl siloxane impression material just before luting. Silicone replicas were scanned in x-ray micro computerized tomography (micro CT). Clinical evaluations took place at baseline (2 days after luting) and following 6, 12, and 24 months after luting. Marginal integrity, marginal discoloration, secondary caries, tooth sensitivity, and fracture were evaluated following FDI criteria. Replica scores were analyzed using Mann-Whitney U and Student's t test (α = .05). Kaplan-Meier statistical analysis was done for the survival rate of PLV. FDI criteria scores were analyzed using Pearson's chi-square test (α = .05). The median marginal gaps for PLV-without-tooth-preparation and PLV-with-minimal-tooth-preparation groups were 100 μm and 140 μm respectively. There was a statistically significant difference between the two groups with respect to marginal gap (P = .04). The mean internal adaptation for the PLV-without-tooth-preparation group was 217.17 ± 54.72 μm, and was 170.67 ± 46.54 μm for the PLV-with-minimaltooth- preparation group. There was a statistically significant difference between the two groups (P = .001). Based on FDI criteria, 100% of the PLV were rated satisfactory during the 2-year period. In this in-vivo study, mean and median values of marginal gap and internal adaptation for PLV with minimal tooth

Density-scaling exponents and virial potential-energy correlation coefficients for the (2n, n) Lennard-Jones system

DEFF Research Database (Denmark)

Friisberg, Ida Marie; Costigliola, Lorenzo; Dyre, Jeppe C.

2017-01-01

This paper investigates the relation between the density-scaling exponent γ and the virial potentialenergy coefficient R at several thermodynamic state points in three dimensions for the generalized (2n, n) Lennard-Jones (LJ) system for n = 4, 9, 12, 18, as well as for the standard n = 6 LJ syste...

Thermodynamic equivalence between the Lennard-Jones and hard-core attractive Yukawa systems

International Nuclear Information System (INIS)

Kadiri, Y.; Albaki, R.; Bretonnet, J.L.

2008-01-01

The investigation of the thermodynamic properties of the Lennard-Jones (LJ) fluid is made by means of a system of particles interacting with a potential of hard-core plus attractive Yukawa tail (HCY). Due to the similarity between the LJ potential and the HCY potential in its overall form, it is worthwhile seeking to approximate the LJ potential in much the same way that the hard-sphere reference potential has been so used. The study consists in describing the thermodynamics of the LJ fluid in terms of the equivalent HCY system, whose the properties are known accurately, by means of mapping the thermodynamic quantities for the HCY potential parameters. The method is feasible owing to a convenient analytical expression of the Helmholtz free energy from the mean-spherical approximation expanded in power of the inverse temperature. Two different procedures are used to determine the parameters of the HCY potential as a function of the thermodynamic states: one is based on the simultaneous fits of pressure and internal energy of the LJ system and the other uses the concept of collision frequency. The reasonable homogeneity of the results in both procedures of mapping makes that the HCY potential is a very good reference system, whose the proposed theoretical expressions can be used confidently to predict the thermodynamic properties of more realistic potentials

Gaussian approximation to single particle correlations at and below the picosecond scale for Lennard-Jones and nanoparticle fluids

International Nuclear Information System (INIS)

Van Zon, Ramses; Ashwin, S S; Cohen, E G D

2008-01-01

To describe short time (picosecond) and small scale (nanometre) transport in fluids, a Green's function approach was recently developed. This approach relies on an expansion of the distribution of single particle displacements around a Gaussian function, yielding an infinite series of correction terms. Applying a recent theorem (van Zon and Cohen 2006 J. Stat. Phys. 123 1–37) shows that for sufficiently small times the terms in this series become successively smaller, so that truncating the series near or at the Gaussian level might provide a good approximation. In this paper, we derive a theoretical estimate for the time scale at which truncating the series at or near the Gaussian level could be supposed to be accurate for equilibrium nanoscale systems. In order to numerically estimate this time scale, the coefficients for the first few terms in the series are determined in computer simulations for a Lennard-Jones (LJ) fluid, an isotopic LJ mixture and a suspension of a LJ-based model of nanoparticles in a LJ fluid. The results suggest that for LJ fluids an expansion around a Gaussian is accurate at time scales up to a picosecond, while for nanoparticles in suspension (a nanofluid), the characteristic time scale up to which the Gaussian is accurate becomes of the order of 5–10 ps. (invited article)

Liquid vs Solid Culture Medium to Evaluate Proportion and Time to Change in Management of Suspects of Tuberculosis-A Pragmatic Randomized Trial in Secondary and Tertiary Health Care Units in Brazil.

Directory of Open Access Journals (Sweden)

Adriana da Silva Rezende Moreira

Full Text Available The use of liquid medium (MGIT960 for tuberculosis (TB diagnosis was recommended by WHO in 2007. However, there has been no evaluation of its effectiveness on clinically important outcomes.A pragmatic trial was carried out in a tertiary hospital and a secondary health care unit in Rio de Janeiro City, Brazil. Participants were 16 years or older, suspected of having TB. They were excluded if only cerebral spinal fluid or blood specimens were available for analysis. MGIT960 technique was compared with the Lowenstein-Jensen (LJ method for laboratory diagnosis of active TB. Primary outcome was the proportion of patients who had their initial medical management changed within 2 months after randomisation. Secondary outcomes were: mean time for changing the procedure, patient satisfaction with the overall treatment and adverse events. Data were analysed by intention-to-treat. Between April 2008 and September 2011, 693 patients were enrolled (348 to MGIT, 345 to LJ. Smear and culture results were positive for 10% and 15.7% of participants, respectively. Patients in the MGIT arm had their initial medical management changed more frequently than those in the LJ group (10.1% MGIT vs 3.8% LJ, RR 2.67 95% CI 1.44-.96, p = 0.002, NNT 16, 95% CI 10-39. Mean time for changing the initial procedure was greater in LJ group at both sites: 20.0 and 29.6 days in MGIT group and 52.2 and 64.3 in LJ group (MD 33.5, 95% CI 30.6-36.4, p = 0.0001. No other important differences were observed.This study suggests that opting for the MGIT960 system for TB diagnosis provides a promising case management model for improving the quality of care and control of TB.Controlled-Trials.com ISRCTN79888843.

Nematic-isotropic transition in some lattice models for rigid cores having semiflexible tails: segmental Lennard-Jones interactions

International Nuclear Information System (INIS)

Dowell, F.

1983-01-01

Two average-environment simple cubic lattice models: a refined model and a simple model, both having site-site (segmental) pair Lennard-Jones (LJ) interactions: for molecules composed of rigid cores having semiflexible tails are presented. The calculated values of the following properties at the nematic-isotropic transition for rigid rods of varying length are compared with relevant experimental data for PAA (p-azoxyanisole, or 4,4'-dimethoxyazoxybenzene): temperature, core orientational order parameter, nematic density and volume, relative density change, and relative entropy change. The temperature change as a function of volume change at constant order parameter is also discussed. In general, both LJ models give considerably better quantitative agreement with experiment, especially for the temperature and the relative density change, than do the earlier lattice models with hard repulsions, with or without constant segmental pair interaction energies. In most aspects, these LJ models give good quantitative agreement with experiment. These LJ models elucidate the importance of realistic intermolecular potentials, especially the role of soft repulsions, in describing an order-disorder transition between two condensed phases

Density-scaling exponents and virial potential-energy correlation ...

Indian Academy of Sciences (India)

This paper investigates the relation between the density-scaling exponent γ and the virial potential energy correlation coefficient R at several thermodynamic state points in three dimensions for the generalized (2n, n) Lennard-Jones (LJ) system for n = 4, 9, 12, 18, as well as for the standard n = 6 LJ system in two,three, and ...

2018-09 - Kaplan Companies

Science.gov (United States)

EPA is providing notice of a proceeding to assess a Class II civil penalty for alleged violations of the Clean Water Act (Act). EPA is also providing notice of opportunity to comment on the proposed penalty assessment.

The Kaplan-Meier theatre

DEFF Research Database (Denmark)

Gerds, Thomas Alexander

2016-01-01

Survival probabilities are not straightforward toobtain when observation periods of individuals differ in length. The Kaplan–Meier theatre is a classroom activity, which starts by a data collection exercise where students imagine sailing on the Titanic. Several students ‘fall in the water’ where....... The Kaplan–Meier method assumes that censored individuals have the same survival chances as the individuals who are still observed. During the Kaplan–Meier theatre, students perform a clever algorithm (Efron 1967), which translates the assumption into action and results in the Kaplan–Meier estimate...

Design of a Kaplan turbine for a wide range of operating head -Curved draft tube design and model test verification-

Science.gov (United States)

KO, Pohan; MATSUMOTO, Kiyoshi; OHTAKE, Norio; DING, Hua

2016-11-01

As for turbomachine off-design performance improvement is challenging but critical for maximising the performing area. In this paper, a curved draft tube for a medium head Kaplan type hydro turbine is introduced and discussed for its significant effect on expanding operating head range. Without adding any extra structure and working fluid for swirl destruction and damping, a carefully designed outline shape of draft tube with the selected placement of center-piers successfully supresses the growth of turbulence eddy and the transport of the swirl to the outlet. Also, more kinetic energy is recovered and the head lost is improved. Finally, the model test results are also presented. The obvious performance improvement was found in the lower net head area, where the maximum efficiency improvement was measured up to 20% without compromising the best efficiency point. Additionally, this design results in a new draft tube more compact in size and so leads to better construction and manufacturing cost performance for prototype. The draft tube geometry parameter designing process was concerning the best efficiency point together with the off-design points covering various water net heads and discharges. The hydraulic performance and flow behavior was numerically previewed and visualized by solving Reynolds-Averaged Navier-Stokes equations with Shear Stress Transport turbulence model. The simulation was under the assumption of steady-state incompressible turbulence flow inside the flow passage, and the inlet boundary condition was the carefully simulated flow pattern from the runner outlet. For confirmation, the corresponding turbine efficiency performance of the entire operating area was verified by model test.

Genetic architecture of the Delis-Kaplan Executive Function System Trail Making Test: evidence for distinct genetic influences on executive function.

Science.gov (United States)

Vasilopoulos, Terrie; Franz, Carol E; Panizzon, Matthew S; Xian, Hong; Grant, Michael D; Lyons, Michael J; Toomey, Rosemary; Jacobson, Kristen C; Kremen, William S

2012-03-01

To examine how genes and environments contribute to relationships among Trail Making Test (TMT) conditions and the extent to which these conditions have unique genetic and environmental influences. Participants included 1,237 middle-aged male twins from the Vietnam Era Twin Study of Aging. The Delis-Kaplan Executive Function System TMT included visual searching, number and letter sequencing, and set-shifting components. Phenotypic correlations among TMT conditions ranged from 0.29 to 0.60, and genes accounted for the majority (58-84%) of each correlation. Overall heritability ranged from 0.34 to 0.62 across conditions. Phenotypic factor analysis suggested a single factor. In contrast, genetic models revealed a single common genetic factor but also unique genetic influences separate from the common factor. Genetic variance (i.e., heritability) of number and letter sequencing was completely explained by the common genetic factor while unique genetic influences separate from the common factor accounted for 57% and 21% of the heritabilities of visual search and set shifting, respectively. After accounting for general cognitive ability, unique genetic influences accounted for 64% and 31% of those heritabilities. A common genetic factor, most likely representing a combination of speed and sequencing, accounted for most of the correlation among TMT 1-4. Distinct genetic factors, however, accounted for a portion of variance in visual scanning and set shifting. Thus, although traditional phenotypic shared variance analysis techniques suggest only one general factor underlying different neuropsychological functions in nonpatient populations, examining the genetic underpinnings of cognitive processes with twin analysis can uncover more complex etiological processes.

Heat-Killed Lactobacillus salivarius and Lactobacillus johnsonii Reduce Liver Injury Induced by Alcohol In Vitro and In Vivo.

Science.gov (United States)

Chuang, Cheng-Hung; Tsai, Cheng-Chih; Lin, En-Shyh; Huang, Chin-Shiu; Lin, Yun-Yu; Lan, Chuan-Ching; Huang, Chun-Chih

2016-10-31

The aim of the present study was to determine whether Lactobacillus salivarius (LS) and Lactobacillus johnsonii (LJ) prevent alcoholic liver damage in HepG2 cells and rat models of acute alcohol exposure. In this study, heat-killed LS and LJ were screened from 50 Lactobacillus strains induced by 100 mM alcohol in HepG2 cells. The severity of alcoholic liver injury was determined by measuring the levels of aspartate transaminase (AST), alanine transaminase (ALT), gamma-glutamyl transferase (γ-GT), lipid peroxidation, triglyceride (TG) and total cholesterol. Our results indicated that heat-killed LS and LJ reduced AST, ALT, γ-GT and malondialdehyde (MDA) levels and outperformed other bacterial strains in cell line studies. We further evaluated these findings by administering these strains to rats. Only LS was able to reduce serum AST levels, which it did by 26.2%. In addition LS significantly inhibited serum TG levels by 39.2%. However, both strains were unable to inhibit ALT levels. In summary, we demonstrated that heat-killed LS and LJ possess hepatoprotective properties induced by alcohol both in vitro and in vivo.

Heat-Killed Lactobacillus salivarius and Lactobacillus johnsonii Reduce Liver Injury Induced by Alcohol In Vitro and In Vivo

Directory of Open Access Journals (Sweden)

Cheng-Hung Chuang

2016-10-01

Full Text Available The aim of the present study was to determine whether Lactobacillus salivarius (LS and Lactobacillus johnsonii (LJ prevent alcoholic liver damage in HepG2 cells and rat models of acute alcohol exposure. In this study, heat-killed LS and LJ were screened from 50 Lactobacillus strains induced by 100 mM alcohol in HepG2 cells. The severity of alcoholic liver injury was determined by measuring the levels of aspartate transaminase (AST, alanine transaminase (ALT, gamma-glutamyl transferase (γ-GT, lipid peroxidation, triglyceride (TG and total cholesterol. Our results indicated that heat-killed LS and LJ reduced AST, ALT, γ-GT and malondialdehyde (MDA levels and outperformed other bacterial strains in cell line studies. We further evaluated these findings by administering these strains to rats. Only LS was able to reduce serum AST levels, which it did by 26.2%. In addition LS significantly inhibited serum TG levels by 39.2%. However, both strains were unable to inhibit ALT levels. In summary, we demonstrated that heat-killed LS and LJ possess hepatoprotective properties induced by alcohol both in vitro and in vivo.

Single-site Lennard-Jones models via polynomial chaos surrogates of Monte Carlo molecular simulation

KAUST Repository

Kadoura, Ahmad Salim

2016-06-01

In this work, two Polynomial Chaos (PC) surrogates were generated to reproduce Monte Carlo (MC) molecular simulation results of the canonical (single-phase) and the NVT-Gibbs (two-phase) ensembles for a system of normalized structureless Lennard-Jones (LJ) particles. The main advantage of such surrogates, once generated, is the capability of accurately computing the needed thermodynamic quantities in a few seconds, thus efficiently replacing the computationally expensive MC molecular simulations. Benefiting from the tremendous computational time reduction, the PC surrogates were used to conduct large-scale optimization in order to propose single-site LJ models for several simple molecules. Experimental data, a set of supercritical isotherms, and part of the two-phase envelope, of several pure components were used for tuning the LJ parameters (ε, σ). Based on the conducted optimization, excellent fit was obtained for different noble gases (Ar, Kr, and Xe) and other small molecules (CH4, N2, and CO). On the other hand, due to the simplicity of the LJ model used, dramatic deviations between simulation and experimental data were observed, especially in the two-phase region, for more complex molecules such as CO2 and C2 H6.

The Diagnostic Utility of Bact/ALERT and Nested PCR in the Diagnosis of Tuberculous Meningitis.

Science.gov (United States)

Sastry, Apurba Sankar; Bhat K, Sandhya; Kumudavathi

2013-01-01

The early laboratory diagnosis of Tuberculous Meningitis (TBM) is crucial, to start the antitubercular chemotherapy and to prevent its complications. However, the conventional methods are either less sensitive or time consuming. Hence, the diagnostic potentials of BacT/ALERT and Polymerase Chain Reaction (PCR) was evaluated in this study. The study group comprised of 62 cases and 33 controls. The cases were divided according to Ahuja's criteria into the confirmed (two cases), highly probable (19 cases), probable (26 cases) and the possible (15 cases) subgroups. Ziehl Neelsen's (ZN) and Auramine Phenol (AP) staining, Lowenstein Jensen (LJ) medium culture, BacT/ALERT and nested Polymerase Chain Reaction (PCR) which targeted IS6110 were carried out on all the patients. The sensitivity of the LJ culture was 3.22%. BacT/ALERT showed a sensitivity and a specificity of 25.80% and 100% and those of nested PCR were found to be 40.32% and 96.97% respectively. The mean detection time of growth of the LJ culture was 31.28 days, whereas that of BacT/ALERT was 20.68 days. The contamination rate in the LJ culture and BacT/ALERT were 7.2% and 5.8% respectively. Nested PCR was found to be more sensitive, followed by BacT/ALERT as compared to the LJ culture and smear microscopy. As both false negative and false positive results have been reported for nested PCR, so it should not be used alone as a criterion for initiating or terminating the therapy, but it should be supported by clinical, radiological, cytological and other microbiological findings.

The Second Zambian National Tuberculosis Drug Resistance survey - a comparison of conventional and molecular methods.

Science.gov (United States)

Kapata, Nathan; Mbulo, Grace; Cobelens, Frank; de Haas, Petra; Schaap, Ab; Mwamba, Pike; Mwanza, Winnie; Muvwimi, Mweemba; Muyoyeta, Monde; Moyo, Maureen; Mulenga, Lutinala; Grobusch, Martin P; Godfrey-Faussett, Peter; Ayles, Helen

2015-11-01

The prevalence of MDR-TB in Zambia was estimated to be 1.8% in 2001. A second drug resistance survey was conducted in 2008 to determine trends; the use of the Genotype MTBDRplus assay was applied to compare results to the gold standard. A two-stage cluster sampling, with health facilities as primary sampling units. Processed sputum specimens were inoculated on solid media for culture; heat-inactivated bacterial suspensions from sputum samples were tested on a commercial line probe assay for the identification of rifampicin and isoniazid resistance. A total of 917 patients with TB were enrolled and 883 (96.3%) analysed. A total of 574 (65%) had LJ results and 824 (93.3%) had results from MTBDRplus assay. The median age was 32, and 63.3% were males. MDR-TB according to LJ-based DST was 1.1% (CI 0.1-2.4) whereas according to MDTBDRplus assay was 1.6% (CI 0.6-2.6). Isoniazid monoresistance in new cases was 2.4% (CI 0.613-4.26) based on LJ results and 5.0% (CI 3.2-6.7) based on the MTBDRplus; in retreatment cases, it was 4.4% (CI 0.3-8.6) and 2.40% (CI <0.1-5.1) on LJ and MTBDRplus, respectively. Rifampicin monoresistance in new cases was 0.1% (CI <0.1-0.4) based on LJ and 0.6% (CI 0.01-1.1) based on the MTBDRplus; in retreatment cases, it was 0% (CI 0-3.8) and 1.8% (CI <0.1-4.0) on LJ and MTBDRplus, respectively. There were no XDR-TB cases found and no association between MDR-TB and HIV. There was no increase in MDR-TB prevalence in Zambia from 2001 to 2008; results from the two methods were similar. Molecular methods were quicker and simpler to use. © 2015 John Wiley & Sons Ltd.

End-preparation assessments and tests for compounded sterile preparations.

Science.gov (United States)

McElhiney, Linda F

2013-01-01

Outsourcing has become a necessity to obtain sterile products that are currently on backorder. Because of the expense of outsourcing sterile compounding, pharmacy leadership in health systems are now considering the option of insourcing and batch preparing compounded sterile preparations, which can be a viable option for a health system. It can significantly decrease drug-spending costs, and the pharmacy has a complete record of the compounding process. The key to preparing high-quality, safe, sterile preparations and meeting United States Pharmacopeia standards is end-preparation assessments and tests.

H2O2 production rate in Lactobacillus johnsonii is modulated via the interplay of a heterodimeric flavin oxidoreductase with a soluble 28 Kd PAS domain containing protein.

Science.gov (United States)

Valladares, Ricardo B; Graves, Christina; Wright, Kaitlyn; Gardner, Christopher L; Lorca, Graciela L; Gonzalez, Claudio F

2015-01-01

Host and commensals crosstalk, mediated by reactive oxygen species (ROS), has triggered a growing scientific interest to understand the mechanisms governing such interaction. However, the majority of the scientific studies published do not evaluate the ROS production by commensals bacteria. In this context we recently showed that Lactobacillus johnsonii N6.2, a strain of probiotic value, modulates the activity of the critical enzymes 2,3-indoleamine dioxygenase via H2O2 production. L. johnsonii N6.2 by decreasing IDO activity, is able to modify the tryptophan/kynurenine ratio in the host blood with further systemic consequences. Understanding the mechanisms of H2O2 production is critical to predict the probiotic value of these strains and to optimize bacterial biomass production in industrial processes. We performed a transcriptome analysis to identify genes differentially expressed in L. johnsonii N6.2 cells collected from cultures grown under different aeration conditions. Herein we described the biochemical characteristics of a heterodimeric FMN reductase (FRedA/B) whose in vitro activity is controlled by LjPAS protein with a typical Per-Arnst-Sim (PAS) sensor domain. Interestingly, LjPAS is fused to the FMN reductase domains in other lactobacillaceae. In L. johnsonii, LjPAS is encoded by an independent gene which expression is repressed under anaerobic conditions (>3 fold). Purified LjPAS was able to slow down the FRedA/B initial activity rate when the holoenzyme precursors (FredA, FredB, and FMN) were mixed in vitro. Altogether the results obtained suggest that LjPAS module regulates the H2O2 production helping the cells to minimize oxidative stress in response to environmental conditions.

Ablation by ultrashort laser pulses: Atomistic and thermodynamic analysis of the processes at the ablation threshold

International Nuclear Information System (INIS)

Upadhyay, Arun K.; Inogamov, Nail A.; Rethfeld, Baerbel; Urbassek, Herbert M.

2008-01-01

Ultrafast laser irradiation of solids may ablate material off the surface. We study this process for thin films using molecular-dynamics simulation and thermodynamic analysis. Both metals and Lennard-Jones (LJ) materials are studied. We find that despite the large difference in thermodynamical properties between these two classes of materials--e.g., for aluminum versus LJ the ratio T c /T tr of critical to triple-point temperature differs by more than a factor of 4--the values of the ablation threshold energy E abl normalized to the cohesion energy, ε abl =E abl /E coh , are surprisingly universal: all are near 0.3 with ±30% scattering. The difference in the ratio T c /T tr means that for metals the melting threshold ε m is low, ε m abl , while for LJ it is high, ε m >ε abl . This thermodynamical consideration gives a simple explanation for the difference between metals and LJ. It explains why despite the universality in ε abl , metals thermomechanically ablate always from the liquid state. This is opposite to LJ materials, which (near threshold) ablate from the solid state. Furthermore, we find that immediately below the ablation threshold, the formation of large voids (cavitation) in the irradiated material leads to a strong temporary expansion on a very slow time scale. This feature is easily distinguished from the acoustic oscillations governing the material response at smaller intensities, on the one hand, and the ablation occurring at larger intensities, on the other hand. This finding allows us to explain the puzzle of huge surface excursions found in experiments at near-threshold laser irradiation

H2O2 production rate in Lactobacillus johnsonii is modulated via the interplay of a heterodimeric flavin oxidoreductase with a soluble 28 Kd PAS domain containing protein.

Directory of Open Access Journals (Sweden)

Ricardo B Valladares

2015-07-01

Full Text Available Host and commensals crosstalk, mediated by reactive oxygen species (ROS, has triggered a growing scientific interest to understand the mechanisms governing such interaction. However, the majority of the scientific studies published do not evaluate the ROS production by commensals bacteria. In this context we recently showed that Lactobacillus johnsonii N6.2, a strain of probiotic value, modulates the activity of the critical enzymes 2,3-indoleamine dioxygenase via H2O2 production. L. johnsonii N6.2 by decreasing IDO activity, is able to modify the tryptophan/kynurenine ratio in the host blood with further systemic consequences. Understanding the mechanisms of H2O2 production is critical to predict the probiotic value of these strains and to optimize bacterial biomass production in industrial processes. We performed a transcriptome analysis to identify genes differentially expressed in L. johnsonii N6.2 cells collected from cultures grown under different aeration conditions. Herein we described the biochemical characteristics of a heterodimeric FMN reductase (FRedA/B whose in vitro activity is controlled by LjPAS protein with a typical Per-Arnst-Sim (PAS sensor domain. Interestingly, LjPAS is fused to the FMN reductase domains in other lactobacillaceae. In L. johnsonii, LjPAS is encoded by an independent gene which expression is repressed under anaerobic conditions (>3 fold. Purified LjPAS was able to slow down the FRedA/B initial activity rate when the holoenzyme precursors (FredA, FredB and FMN were mixed in vitro. Altogether the results obtained suggest that LjPAS module regulates the H2O2 production helping the cells to minimize oxidative stress in response to environmental conditions.

Solution preparation

International Nuclear Information System (INIS)

Seitz, M.G.

1982-01-01

Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results

Role of newer methods of diagnosing genital tuberculosis in infertile women

Directory of Open Access Journals (Sweden)

Geetika Goel

2013-01-01

Full Text Available Genital tuberculosis is an important under-diagnosed factor of infertility. A vast majority of cases are asymptomatic and diagnosing them will help in treating such patients. We conducted a retrospective study in a tertiary care hospital of Delhi with an aim to compare different methods i.e., histopathological examination (HPE, acid-fast bacilli (AFB smears, Lowenstein-Jensen (LJ culture, BACTEC culture and polymerase chain reaction deoxyribonucleic acid (PCR-DNA for diagnosing endometrial tuberculosis in infertile women. The data from 546 samples of endometrial biopsy histopathology, AFB smears and LJ culture was collected and then analyzed. Of these, HPE for tuberculosis was positive in 13, LJ culture in 10, AFB smear was positive in one case. BACTEC and PCR-DNA were feasible for 90 patients and PCR-DNA was positive in 20 and BACTEC in eight patients. Out of 20 patients with PCR positive results, 15 were only PCR positive and were subjected to hyster-laparoscopy and five had evidence of tuberculosis. Thus, none of the available tests can pick up all cases of genital tuberculosis, but conventional methods i.e., histopathology and LJ culture still has an important role in the diagnosis of endometrial tuberculosis in government setups where BACTEC and PCR are not performed routinely due to lack of resources.

Single-site Lennard-Jones models via polynomial chaos surrogates of Monte Carlo molecular simulation

Energy Technology Data Exchange (ETDEWEB)

Kadoura, Ahmad, E-mail: ahmad.kadoura@kaust.edu.sa, E-mail: adil.siripatana@kaust.edu.sa, E-mail: shuyu.sun@kaust.edu.sa, E-mail: omar.knio@kaust.edu.sa; Sun, Shuyu, E-mail: ahmad.kadoura@kaust.edu.sa, E-mail: adil.siripatana@kaust.edu.sa, E-mail: shuyu.sun@kaust.edu.sa, E-mail: omar.knio@kaust.edu.sa [Computational Transport Phenomena Laboratory, The Earth Sciences and Engineering Department, The Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900 (Saudi Arabia); Siripatana, Adil, E-mail: ahmad.kadoura@kaust.edu.sa, E-mail: adil.siripatana@kaust.edu.sa, E-mail: shuyu.sun@kaust.edu.sa, E-mail: omar.knio@kaust.edu.sa; Hoteit, Ibrahim, E-mail: ibrahim.hoteit@kaust.edu.sa [Earth Fluid Modeling and Predicting Group, The Earth Sciences and Engineering Department, The Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900 (Saudi Arabia); Knio, Omar, E-mail: ahmad.kadoura@kaust.edu.sa, E-mail: adil.siripatana@kaust.edu.sa, E-mail: shuyu.sun@kaust.edu.sa, E-mail: omar.knio@kaust.edu.sa [Uncertainty Quantification Center, The Applied Mathematics and Computational Science Department, The Computer, Electrical and Mathematical Sciences and Engineering Division, King Abdullah University of Science and Technology, Thuwal 23955-6900 (Saudi Arabia)

2016-06-07

In this work, two Polynomial Chaos (PC) surrogates were generated to reproduce Monte Carlo (MC) molecular simulation results of the canonical (single-phase) and the NVT-Gibbs (two-phase) ensembles for a system of normalized structureless Lennard-Jones (LJ) particles. The main advantage of such surrogates, once generated, is the capability of accurately computing the needed thermodynamic quantities in a few seconds, thus efficiently replacing the computationally expensive MC molecular simulations. Benefiting from the tremendous computational time reduction, the PC surrogates were used to conduct large-scale optimization in order to propose single-site LJ models for several simple molecules. Experimental data, a set of supercritical isotherms, and part of the two-phase envelope, of several pure components were used for tuning the LJ parameters (ε, σ). Based on the conducted optimization, excellent fit was obtained for different noble gases (Ar, Kr, and Xe) and other small molecules (CH{sub 4}, N{sub 2}, and CO). On the other hand, due to the simplicity of the LJ model used, dramatic deviations between simulation and experimental data were observed, especially in the two-phase region, for more complex molecules such as CO{sub 2} and C{sub 2} H{sub 6}.

Genome-Wide Identification, Evolutionary Analysis and Expression Profiles of LATERAL ORGAN BOUNDARIES DOMAIN Gene Family in Lotus japonicus and Medicago truncatula.

Directory of Open Access Journals (Sweden)

Tianquan Yang

Full Text Available The LATERAL ORGAN BOUNDARIES DOMAIN (LBD gene family has been well-studied in Arabidopsis and play crucial roles in the diverse growth and development processes including establishment and maintenance of boundary of developmental lateral organs. In this study we identified and characterized 38 LBD genes in Lotus japonicus (LjLBD and 57 LBD genes in Medicago truncatula (MtLBD, both of which are model legume plants that have some specific development features absent in Arabidopsis. The phylogenetic relationships, their locations in the genome, genes structure and conserved motifs were examined. The results revealed that all LjLBD and MtLBD genes could be distinctly divided into two classes: Class I and II. The evolutionary analysis showed that Type I functional divergence with some significantly site-specific shifts may be the main force for the divergence between Class I and Class II. In addition, the expression patterns of LjLBD genes uncovered the diverse functions in plant development. Interestingly, we found that two LjLBD proteins that were highly expressed during compound leaf and pulvinus development, can interact via yeast two-hybrid assays. Taken together, our findings provide an evolutionary and genetic foundation in further understanding the molecular basis of LBD gene family in general, specifically in L. japonicus and M. truncatula.

Evaluation of Microscopic Observation Drug Susceptibility (MODS) and the string test for rapid diagnosis of pulmonary tuberculosis in HIV/AIDS patients in Bolivia.

Science.gov (United States)

Lora, Meredith H; Reimer-McAtee, Melissa J; Gilman, Robert H; Lozano, Daniel; Saravia, Ruth; Pajuelo, Monica; Bern, Caryn; Castro, Rosario; Espinoza, Magaly; Vallejo, Maya; Solano, Marco; Challapa, Roxana; Torrico, Faustino

2015-06-06

Tuberculosis (TB) is the most common opportunistic infection and the leading cause of death in HIV-positive people worldwide. Diagnosing TB is difficult, and is more challenging in resource-scarce settings where culture-based diagnostic methods rely on poorly sensitive smear microscopy by Ziehl-Neelsen stain (ZN). We performed a cross-sectional study examining the diagnostic utility of Microscopic Observation Drug Susceptibility liquid culture (MODS) versus traditional Ziehl-Neelsen staining (ZN) and Lowenstein Jensen culture (LJ) of pulmonary tuberculosis (TB) and multidrug-resistant tuberculosis (MDRTB) in HIV-infected patients in Bolivia. For sputum scarce individuals we assessed the value of the string test and induced sputum for TB diagnosis. The presence of Mycobacterium tuberculosis (Mtb) in the sputum of 107 HIV-positive patients was evaluated by ZN, LJ, and MODS. Gastric secretion samples obtained by the string test were evaluated by MODS in 102 patients. The TB-HIV co-infection rate of HIV patients with respiratory symptoms by sputum sample was 45 % (48/107); 46/48 (96 %) were positive by MODS, 38/48 (79 %) by LJ, and 30/48 (63 %) by ZN. The rate of MDRTB was 9 % (4/48). Median time to positive culture was 10 days by MODS versus 34 days by LJ (p Bolivia.

Optimal preparation-to-colonoscopy interval in split-dose PEG bowel preparation determines satisfactory bowel preparation quality: an observational prospective study.

Science.gov (United States)

Seo, Eun Hee; Kim, Tae Oh; Park, Min Jae; Joo, Hee Rin; Heo, Nae Yun; Park, Jongha; Park, Seung Ha; Yang, Sung Yeon; Moon, Young Soo

2012-03-01

Several factors influence bowel preparation quality. Recent studies have indicated that the time interval between bowel preparation and the start of colonoscopy is also important in determining bowel preparation quality. To evaluate the influence of the preparation-to-colonoscopy (PC) interval (the interval of time between the last polyethylene glycol dose ingestion and the start of the colonoscopy) on bowel preparation quality in the split-dose method for colonoscopy. Prospective observational study. University medical center. A total of 366 consecutive outpatients undergoing colonoscopy. Split-dose bowel preparation and colonoscopy. The quality of bowel preparation was assessed by using the Ottawa Bowel Preparation Scale according to the PC interval, and other factors that might influence bowel preparation quality were analyzed. Colonoscopies with a PC interval of 3 to 5 hours had the best bowel preparation quality score in the whole, right, mid, and rectosigmoid colon according to the Ottawa Bowel Preparation Scale. In multivariate analysis, the PC interval (odds ratio [OR] 1.85; 95% CI, 1.18-2.86), the amount of PEG ingested (OR 4.34; 95% CI, 1.08-16.66), and compliance with diet instructions (OR 2.22l 95% CI, 1.33-3.70) were significant contributors to satisfactory bowel preparation. Nonrandomized controlled, single-center trial. The optimal time interval between the last dose of the agent and the start of colonoscopy is one of the important factors to determine satisfactory bowel preparation quality in split-dose polyethylene glycol bowel preparation. Copyright © 2012 American Society for Gastrointestinal Endoscopy. Published by Mosby, Inc. All rights reserved.

Effect of Energy Polydispersity on the Nature of Lennard-Jones Liquids

OpenAIRE

Ingebrigtsen, Trond S.; Tanaka, Hajime

2016-01-01

In the companion paper [T. S. Ingebrigtsen and H. Tanaka, J. Phys. Chem. B 119, 11052 (2015)] the effect of size polydispersity on the nature of Lennard-Jones (LJ) liquids, which represent most molecular liquids without hydrogen bonds, was studied. More specifically, it was shown that even highly size polydisperse LJ liquids are Roskilde-simple (RS) liquids. RS liquids are liquids with strong correlation between constant volume equilibrium fluctuations of virial and potential energy and are s...

Molecular simulation of thermodynamic and transport properties for the H{sub 2}O+NaCl system

Energy Technology Data Exchange (ETDEWEB)

Orozco, Gustavo A.; Jiang, Hao; Panagiotopoulos, Athanassios Z., E-mail: azp@princeton.edu [Department of Chemical and Biological Engineering, Princeton University, Princeton, New Jersey 08544 (United States); Moultos, Othonas A.; Economou, Ioannis G. [Chemical Engineering Program, Texas A and M University at Qatar, P.O. Box 23874, Doha (Qatar)

2014-12-21

Molecular dynamics and Monte Carlo simulations have been carried out to obtain thermodynamic and transport properties of the binary mixture H{sub 2}O+NaCl at temperatures from T = 298 to 473 K. In particular, vapor pressures, liquid densities, viscosities, and vapor-liquid interfacial tensions have been obtained as functions of pressure and salt concentration. Several previously proposed fixed-point-charge models that include either Lennard-Jones (LJ) 12-6 or exponential-6 (Exp6) functional forms to describe non-Coulombic interactions were studied. In particular, for water we used the SPC and SPC/E (LJ) models in their rigid forms, a semiflexible version of the SPC/E (LJ) model, and the Errington-Panagiotopoulos Exp6 model; for NaCl, we used the Smith-Dang and Joung-Cheatham (LJ) parameterizations as well as the Tosi-Fumi (Exp6) model. While none of the model combinations are able to reproduce simultaneously all target properties, vapor pressures are well represented using the SPC plus Joung-Cheathem model combination, and all LJ models do well for the liquid density, with the semiflexible SPC/E plus Joung-Cheatham combination being the most accurate. For viscosities, the combination of rigid SPC/E plus Smith-Dang is the best alternative. For interfacial tensions, the combination of the semiflexible SPC/E plus Smith-Dang or Joung-Cheatham gives the best results. Inclusion of water flexibility improves the mixture densities and interfacial tensions, at the cost of larger deviations for the vapor pressures and viscosities. The Exp6 water plus Tosi-Fumi salt model combination was found to perform poorly for most of the properties of interest, in particular being unable to describe the experimental trend for the vapor pressure as a function of salt concentration.

Relative costs of anesthesiologist prepared, hospital pharmacy prepared and outsourced anesthesia drugs.

Science.gov (United States)

Jelacic, Srdjan; Craddick, Karen; Nair, Bala G; Bounthavong, Mark; Yeung, Kai; Kusulos, Dolly; Knutson, Jennifer A; Somani, Shabir; Bowdle, Andrew

2017-02-01

Anesthesia drugs can be prepared by anesthesia providers, hospital pharmacies or outsourcing facilities. The decision whether to outsource all or some anesthesia drugs is challenging since the costs associated with different anesthesia drug preparation methods remain poorly described. The costs associated with preparation of 8 commonly used anesthesia drugs were analyzed using a budget impact analysis for 4 different syringe preparation strategies: (1) all drugs prepared by anesthesiologist, (2) drugs prepared by anesthesiologist and hospital pharmacy, (3) drugs prepared by anesthesiologist and outsourcing facility, and (4) all drugs prepared by outsourcing facility. A strategy combining anesthesiologist and hospital pharmacy prepared drugs was associated with the lowest estimated annual cost in the base-case budget impact analysis with an annual cost of $225 592, which was lower than other strategies by a margin of greater than $86 000. A combination of anesthesiologist and hospital pharmacy prepared drugs resulted in the lowest annual cost in the budget impact analysis. However, the cost of drugs prepared by an outsourcing facility maybe lower if the capital investment needed for the establishment and maintenance of the US Pharmacopeial Convention Chapter compliant facility is included in the budget impact analysis. Copyright © 2016 Elsevier Inc. All rights reserved.

Simple, direct drug susceptibility testing technique for diagnosis of drug-resistant tuberculosis in resource-poor settings.

Science.gov (United States)

Kim, C-K; Joo, Y-T; Lee, E P; Park, Y K; Kim, H-J; Kim, S J

2013-09-01

The Korean Institute of Tuberculosis, Seoul, Republic of Korea. To develop a simple, direct drug susceptibility testing (DST) technique using Kudoh-modified Ogawa (KMO) medium. The critical concentrations of isoniazid (INH), rifampicin (RMP), kanamycin (KM) and ofloxacin (OFX) for KMO medium were calibrated by comparing the minimal inhibitory concentrations (MICs) against clinical isolates of Mycobacterium tuberculosis on KMO with those on Löwenstein-Jensen (LJ). The performance of the direct KMO DST technique was evaluated on 186 smear-positive sputum specimens and compared with indirect LJ DST. Agreement of MICs on direct vs. indirect DST was high for INH, RMP and OFX. KM MICs on KMO were ∼10 g/ml higher than those on LJ. The critical concentrations of INH, RMP, OFX and KM for KMO were therefore set at 0.2, 40.0, 2.0, and 40.0 g/ml. The evaluation of direct DST of smear-positive sputum specimens showed 100% agreement with indirect LJ DST for INH and RMP. However, the respective susceptible and resistant predictive values were 98.8% and 100% for OFX, and 100% and 80% for KM. Direct DST using KMO is useful, with clear advantages of a shorter turnaround time, procedural simplicity and low cost compared to indirect DST. It may be most indicated in resource-poor settings for programmatic management of drug-resistant tuberculosis.

Evaluation of the microscopic observational drug susceptibility assay for rapid and efficient diagnosis of multi-drug resistant tuberculosis

Directory of Open Access Journals (Sweden)

R P Lazarus

2012-01-01

Full Text Available Purpose: Tuberculosis (TB is endemic in India and the burden of multi-drug-resistant tuberculosis (MDR-TB is high. Early detection of MDR-TB is of primary importance in controlling the spread of TB. The microscopic observational drug susceptibility (MODS assay has been described as a cost-effective and rapid method by which mycobacterial culture and the drug susceptibility test (DST can be done at the same time. Materials and Methods: A total of 302 consecutive sputum samples that were received in an accredited mycobacteriology laboratory for conventional culture and DST were evaluated by the MODS assay. Results: In comparison with conventional culture on Lowenstein Jensen (LJ media, the MODS assay showed a sensitivity of 94.12% and a specificity of 89.39% and its concordance with the DST by the proportion method on LJ media to isoniazid and rifampicin was 90.8% and 91.5%, respectively. The turnaround time for results by MODS was 9 days compared to 21 days by culture on LJ media and an additional 42 days for DST by the 1% proportion method. The cost of performing a single MODS assay was Rs. 250/-, compared to Rs. 950/- for culture and 1st line DST on LJ. Conclusion: MODS was found to be a sensitive and rapid alternative method for performing culture and DST to identify MDR-TB in resource poor settings.

Preparing for Surgery

Science.gov (United States)

... Events Advocacy For Patients About ACOG Preparing for Surgery Home For Patients Search FAQs Preparing for Surgery ... Surgery FAQ080, August 2011 PDF Format Preparing for Surgery Gynecologic Problems What is the difference between outpatient ...

Noh, Kaplan, and Sievers reply

International Nuclear Information System (INIS)

Noh, T.W.; Kaplan, S.G.; Sievers, A.J.

1989-01-01

A reply to the comment for infrared resonance in superconducting LaSrCuO is given. The authors provide direct experimental evidence that the particles studied for the most part single crystals have anisotropic optical properties, the hypothesis and comment do not apply

Atypical performance patterns on Delis-Kaplan Executive Functioning System Color-Word Interference Test: Cognitive switching and learning ability in older adults.

Science.gov (United States)

Berg, Jody-Lynn; Swan, Natasha M; Banks, Sarah J; Miller, Justin B

2016-09-01

Cognitive set shifting requires flexible application of lower level processes. The Delis-Kaplan Executive Functioning System (DKEFS) Color-Word Interference Test (CWIT) is commonly used to clinically assess cognitive set shifting. An atypical pattern of performance has been observed on the CWIT; a subset of individuals perform faster, with equal or fewer errors, on the more difficult inhibition/switching than the inhibition trial. This study seeks to explore the cognitive underpinnings of this atypical pattern. It is hypothesized that atypical patterns on CWIT will be associated with better performance on underlying cognitive measures of attention, working memory, and learning when compared to typical CWIT patterns. Records from 239 clinical referrals (age: M = 68.09 years, SD = 10.62; education: M = 14.87 years, SD = 2.73) seen for a neuropsychological evaluation as part of diagnostic work up in an outpatient dementia and movement disorders clinic were sampled. The standard battery of tests included measures of attention, learning, fluency, executive functioning, and working memory. Analyses of variance (ANOVAs) were conducted to compare the cognitive performance of those with typical versus atypical CWIT patterns. An atypical pattern of performance was confirmed in 23% of our sample. Analyses revealed a significant group difference in acquisition of information on both nonverbal (Brief Visuospatial Memory Test-Revised, BVMT-R total recall), F(1, 213) = 16.61, p < .001, and verbal (Hopkins Verbal Learning Test-Revised, HVLT-R total recall) learning tasks, F(1, 181) = 6.43, p < .01, and semantic fluency (Animal Naming), F(1, 232) = 7.57, p = .006, with the atypical group performing better on each task. Effect sizes were larger for nonverbal (Cohen's d = 0.66) than verbal learning (Cohen's d = 0.47) and semantic fluency (Cohen's d = 0.43). Individuals demonstrating an atypical pattern of performance on the CWIT inhibition/switching trial also demonstrated relative

Freezing of Lennard-Jones-type fluids

International Nuclear Information System (INIS)

Khrapak, Sergey A.; Chaudhuri, Manis; Morfill, Gregor E.

2011-01-01

We put forward an approximate method to locate the fluid-solid (freezing) phase transition in systems of classical particles interacting via a wide range of Lennard-Jones-type potentials. This method is based on the constancy of the properly normalized second derivative of the interaction potential (freezing indicator) along the freezing curve. As demonstrated recently it yields remarkably good agreement with previous numerical simulation studies of the conventional 12-6 Lennard-Jones (LJ) fluid [S.A.Khrapak, M.Chaudhuri, G.E.Morfill, Phys. Rev. B 134, 052101 (2010)]. In this paper, we test this approach using a wide range of the LJ-type potentials, including LJ n-6 and exp-6 models, and find that it remains sufficiently accurate and reliable in reproducing the corresponding freezing curves, down to the triple-point temperatures. One of the possible application of the method--estimation of the freezing conditions in complex (dusty) plasmas with ''tunable'' interactions--is briefly discussed.

Comparison of the conventional diagnostic modalities, bactec culture and polymerase chain reaction test for diagnosis of tuberculosis

Directory of Open Access Journals (Sweden)

Negi S

2005-01-01

Full Text Available PURPOSE: To evaluate the performance of 65 kDa antigen based PCR assay in clinical samples obtained from pulmonary and extrapulmonary cases of tuberculosis. METHODS: One hundred and fifty six samples were processed for detection of Mycobacterium tuberculosis by ZN smear examination, LJ medium culture, BACTEC radiometric culture and PCR tests. RESULTS: A significant difference was seen in the sensitivities of different tests, the figures being 74.4% for PCR test, 33.79% for ZN smear examination, 48.9% for LJ culture and 55.8% for BACTEC culture (P0.05 as far as specificity of different tests was concerned. PCR test sensitivity in pulmonary and extrapulmonary clinical samples were 72.7% and 75.9% respectively and found to be significantly higher (PM.tuberculosis was 24.03 days by LJ medium culture, 12.89 days by BACTEC culture and less than one day by PCR test. CONCLUSIONS: PCR is a rapid and sensitive method for the early diagnosis of pulmonary and extrapulmonary tuberculosis.

The Sovereign Acts Doctrine in the Law of Government Contracts

Science.gov (United States)

1992-09-30

47 Ohio St. L.J. 984, 36 Def. L.J. 537 (1986). 7 concept of estoppel in government procurement.2’ A final area, which exceeds the scope of this study...position that it is possible that estoppel may run against the Government, but a case in which estoppel has been so allowed is yet to be decided. See...collateral estoppel is justified [relative to an ’equitable claim’] 5. In congressional reference cases the facts are seldom in issue.51 Instead, the question

Importance of dispersion and electron correlation in ab initio protein folding.

Science.gov (United States)

He, Xiao; Fusti-Molnar, Laszlo; Cui, Guanglei; Merz, Kenneth M

2009-04-16

Dispersion is well-known to be important in biological systems, but the effect of electron correlation in such systems remains unclear. In order to assess the relationship between the structure of a protein and its electron correlation energy, we employed both full system Hartree-Fock (HF) and second-order Møller-Plesset perturbation (MP2) calculations in conjunction with the Polarizable Continuum Model (PCM) on the native structures of two proteins and their corresponding computer-generated decoy sets. Because of the expense of the MP2 calculation, we have utilized the fragment molecular orbital method (FMO) in this study. We show that the sum of the Hartree-Fock (HF) energy and force field (LJ6)-derived dispersion energy (HF + LJ6) is well correlated with the energies obtained using second-order Møller-Plesset perturbation (MP2) theory. In one of the two examples studied, the correlation energy as well as the empirical dispersive energy term was able to discriminate between native and decoy structures. On the other hand, for the second protein we studied, neither the correlation energy nor dispersion energy showed discrimination capabilities; however, the ab initio MP2 energy and the HF+LJ6 both ranked the native structure correctly. Furthermore, when we randomly scrambled the Lennard-Jones parameters, the correlation between the MP2 energy and the sum of the HF energy and dispersive energy (HF+LJ6) significantly drops, which indicates that the choice of Lennard-Jones parameters is important.

Reconciling the understanding of 'hydrophobicity' with physics-based models of proteins.

Science.gov (United States)

Harris, Robert C; Pettitt, B Montgomery

2016-03-02

The idea that a 'hydrophobic energy' drives protein folding, aggregation, and binding by favoring the sequestration of bulky residues from water into the protein interior is widespread. The solvation free energies (ΔGsolv) of small nonpolar solutes increase with surface area (A), and the free energies of creating macroscopic cavities in water increase linearly with A. These observations seem to imply that there is a hydrophobic component (ΔGhyd) of ΔGsolv that increases linearly with A, and this assumption is widely used in implicit solvent models. However, some explicit-solvent molecular dynamics studies appear to contradict these ideas. For example, one definition (ΔG(LJ)) of ΔGhyd is that it is the free energy of turning on the Lennard-Jones (LJ) interactions between the solute and solvent. However, ΔG(LJ) decreases with A for alanine and glycine peptides. Here we argue that these apparent contradictions can be reconciled by defining ΔGhyd to be a near hard core insertion energy (ΔGrep), as in the partitioning proposed by Weeks, Chandler, and Andersen. However, recent results have shown that ΔGrep is not a simple function of geometric properties of the molecule, such as A and the molecular volume, and that the free energy of turning on the attractive part of the LJ potential cannot be computed from first-order perturbation theory for proteins. The theories that have been developed from these assumptions to predict ΔGhyd are therefore inadequate for proteins.

Investigation of OMNIgene·SPUTUM performance in delayed tuberculosis testing by smear, culture, and Xpert MTB/RIF assays in Uganda

Directory of Open Access Journals (Sweden)

C.D. Kelly-Cirino

2017-06-01

Full Text Available OMNIgene·SPUTUM (OM-S is a sample transport reagent designed to work with all tuberculosis diagnostics while eliminating the need for cold chain. OM-S-treated sputum samples were assayed in several tests after multiday holds. Raw sputa from 100 patients underwent direct smear microscopy, were manually split and assigned to the OM-S group [OM-S added at collection (no other processing required and tested after 0- to 5-day holds at room temperature] or standard-of-care (SOC group (NaOH/N-acetyl l-cysteine decontamination, all tested on day of collection. Concentrated smear microscopy, Lowenstein Jensen (LJ culture, and mycobacteria growth indicator tube (MGIT culture were performed. For patients with negative direct smear, a second sample was split, with SOC (raw sputum and OM-S portions (sediment tested in the Xpert MTB/RIF (Xpert assay. OM-S group and SOC group results were strongly concordant on all four tests [range, 89% (MGIT–97% (Xpert]. OM-S MGIT, LJ, and Xpert tests were in statistical agreement with SOC MGIT as reference. OM-S specimens had lower culture contamination rates (3% vs. 10% LJ; 2% vs. 5% MGIT but required, on average, 5.6 additional days to become MGIT-positive. The findings suggest that samples held/transported in OM-S are compatible with smear microscopy, LJ or MGIT culture, and Xpert, and perform comparably to fresh sputum samples. Larger feasibility studies are warranted.

[Gene cloning and bioinformatics analysis of SABATH methyltransferase in Lonicera japonica var. chinensis].

Science.gov (United States)

Yu, Xiao-Dan; Jiang, Chao; Huang, Lu-Qi; Qin, Shuang-Shuang; Zeng, Xiang-Mei; Chen, Ping; Yuan, Yuan

2013-08-01

To clone SABATH methyltransferase (rLjSABATHMT) gene in Lonicera japonica var. chinensis, and compare the gene expression and intron sequence of SABATH methyltransferase orthologous in L. japonica with L. japonica var. chinensis. It provide a basis for gene regulate the formation of L. japonica floral scents. The cDNA and genome sequences of LjSABATHMT from L. japonica var. chinensis were cloned according to the gene fragments in cDNA library. The LjSABATHMT protein was characterized by bioinformatics analysis. SABATH family phylogenetic tree were built by MEGA 5.0. The transcripted level of SABATHMT orthologous were analyzed in different organs and different flower periods of L. japonica and L. japonica var. chinensis using RT-PCR analysis. Intron sequences of SABATHMT orthologous were also analyzied. The cDNA of LjSABATHMT was 1 251 bp, had a complete coding frame with 365 amino acids. The protein had the conservative SABATHMT domain, and phylogenetic tree showed that it may be a salicylic acid/benzoic acid methyltransferase. Higher expression of SABATH methyltransferase orthologous was found in flower. The intron sequence of L. japonica and L. japonica var. chinensis had rich polymorphism, and two SNP are unique genotype of L. japonica var. chinensis. The motif elements in two orthologous genes were significant differences. The intron difference of SABATH methyltransferase orthologous could be inducing to difference of gene expression between L. japonica and L. japonica var. chinensis. These results will provide important base on regulating active compounds of L. japonica.

Metabolism of DMSP, DMS and DMSO by the cultivable bacterial community associated with the DMSP-producing dinoflagellate Scrippsiella trochoidea

Digital Repository Service at National Institute of Oceanography (India)

Hatton, A.D.; Shenoy, D.M.; Hart, M.C.; Mogg, A.; Green, D.H.

populations in the Sargasso Sea (del Valle et al. 2007), North Sea (Zubkov et al. 2002) and Gulf of Mexico (Vila-Costa et al. 2006). Instead, there is now a body of evidence, which supports the hypothesis that DMS oxidation to DMSO may be the major pathway... of Mexico. Limnol Oceanogr 45(4):849–861 Kiene RP, Linn LJ (2000b) The fate of dissolved dimethylsulfoniopropionate (DMSP) in seawater: tracer studies using 35S-DMSP. Geochim Cosmochim Acta 64(16):2797–2810 Kiene RP, Linn LJ, Bruton JA (2000) New...

Journey length and high temperatures: effects on rabbit welfare and meat quality.

Science.gov (United States)

Liste, G; María, G A; Buil, T; García-Belenguer, S; Chacón, G; Olleta, J L; Sañudo, C; Villarroel, M

2006-02-01

The transport of domestic animals by road can increase levels of stress and decrease meat quality, especially in unfavourable climates. The purpose of this study was to investigate the effect of journey duration and vertical position on the transport truck on some physiological indicators of stress and on instrumental meat quality parameters in commercial rabbits. In the summer months (June and July, 2003), 78 rabbits were subjected to either long (7 h) (LJ) or short (1 h) (SJ) journeys (3 replicates each, n = 6) between the farm and an abattoir in northern Spain. The position (top, middle, or bottom) occupied by the rabbits on the Multi-Floor cage Rolling Stand (MFRS) of the transport truck was recorded. Blood samples were collected at sticking and meat pH was measured at 24 h post-mortem (pH24). At 48 h post-mortem, samples of the M. longissimus dorsi were used to determine water-holding capacity (WHC) and instrumental tenderness using an INSTRON machine. The levels of corticosterone, glucose, lactate, and creatine kinase were slightly higher in LJ than in SJ samples, but the difference was not statistically significant (p MFRS showed higher levels (p < or = 0.05) of glucose and creatine kinase (middle), and corticosterone (bottom) than the rabbits located at the top floor. The pH 24 and WHC values of the SJ and LJ rabbits did not differ significantly. Journey length had a significant effect (p < or = 0.01) on meat tenderness. The meat from rabbits subjected to LJ had higher values of maximum stress and total toughness than did the SJ rabbits (p < or = 0.05). There were similar differences (p < or = 0.05) between LJ and SJ rabbits in their stress values of compression at 20% and 40% (measures of the tenderness of raw meat). In hot weather, the position on the transport truck appeared to have a greater effect on rabbit welfare than the duration of the journey.

Sample preparation

International Nuclear Information System (INIS)

Anon.

1992-01-01

Sample preparation prior to HPLC analysis is certainly one of the most important steps to consider in trace or ultratrace analysis. For many years scientists have tried to simplify the sample preparation process. It is rarely possible to inject a neat liquid sample or a sample where preparation may not be any more complex than dissolution of the sample in a given solvent. The last process alone can remove insoluble materials, which is especially helpful with the samples in complex matrices if other interactions do not affect extraction. Here, it is very likely a large number of components will not dissolve and are, therefore, eliminated by a simple filtration process. In most cases, the process of sample preparation is not as simple as dissolution of the component interest. At times, enrichment is necessary, that is, the component of interest is present in very large volume or mass of material. It needs to be concentrated in some manner so a small volume of the concentrated or enriched sample can be injected into HPLC. 88 refs

The importance of accurate interaction potentials in the melting of argon nanoclusters

Science.gov (United States)

Pahl, E.; Calvo, F.; Schwerdtfeger, P.

The melting temperatures of argon clusters ArN (N = 13, 55, 147, 309, 561, and 923) and of bulk argon have been obtained from exchange Monte Carlo simulations and are compared using different two-body interaction potentials, namely the standard Lennard-Jones (LJ), Aziz and extended Lennard-Jones (ELJ) potentials. The latter potential has many advantages: while maintaining the computational efficiency of the commonly used LJ potential, it is as accurate as the Aziz potential but the computer time scales more favorably with increasing cluster size. By applying the ELJ form and extrapolating the cluster data to the infinite system, we are able to extract the melting point of argon already in good agreement with experimental measurements. By considering the additional Axilrod-Teller three-body contribution as well, we calculate a melting temperature of T meltELJ = 84.7 K compared to the experimental value of T meltexp = 83.85 K, whereas the LJ potential underestimates the melting point by more than 7 K. Thus melting temperatures within 1 K accuracy are now feasible.

Exploring radar and lightning variables associated with the Lightning Jump. Can we predict the size of the hail?

Science.gov (United States)

Farnell, C.; Rigo, T.; Pineda, N.

2018-04-01

Severe weather regularly hits the Lleida Plain (western part of Catalonia, NE of Iberian Peninsula), causing important damage to the local agriculture. In order to help severe weather surveillance tasks, the Meteorological Service of Catalonia (SMC) implemented in 2016 the Lightning Jump (LJ) algorithm as operative warning tool after an exhaustive validation phase of several months. The present study delves into the analysis of the relationship between Lightning Jump alerts and hail occurrence, through the analysis of lightning and radar variables in the moment when the warning is issued. Overall, the study has consisted of the analysis of 149 cases, grouping them into two categories according to hail size: small and large hail, with a threshold of 2 cm of diameter. The thunderstorms related to big sized hail presented remarkable differences in some of the variables analysed that could help forecast the size of hail when the LJ alert is triggered. Moreover, other variables have been allowed to observe and to corroborate how the LJ algorithm works during the 13 min before the warning is triggered.

The hospital preparation of radiopharmaceuticals

International Nuclear Information System (INIS)

The subject is covered in sections: introduction; preparation ((general - sterilization), production areas (laboratories), working methods for injections, working methods for oral preparations and iodination procedures); analytical testing (general, standards common to injections and oral preparations, standards for injections, standards for oral preparations); reliable methods of preparing sup(99m)Tc-radiopharmaceuticals and 51 Cr-red cells; commercial radiopharmaceutical kits. (U.K.)

A comparison of liquid and solid culture for determining relapse and durable cure in phase III TB trials for new regimens.

Science.gov (United States)

Phillips, Patrick P J; Mendel, Carl M; Nunn, Andrew J; McHugh, Timothy D; Crook, Angela M; Hunt, Robert; Bateson, Anna; Gillespie, Stephen H

2017-11-24

Tuberculosis kills more people than any other infectious disease, and new regimens are essential. The primary endpoint for confirmatory phase III trials for new regimens is a composite outcome that includes bacteriological treatment failure and relapse. Culture methodology is critical to the primary trial outcome. Patients in clinical trials can have positive cultures after treatment ends that may not necessarily indicate relapse, which was ascribed previously to laboratory cross-contamination or breakdown of old lesions. Löwenstein-Jensen (LJ) medium was the previous standard in clinical trials, but almost all current and future trials will use the Mycobacteria Growth Indicator Tube (MGIT) system due to its simplicity and consistency of use, which will affect phase III trial results. LJ was used for the definition of the primary endpoint in the REMoxTB trial, but every culture was also inoculated in parallel into the MGIT system. The data from this trial, therefore, provide a unique opportunity to investigate and compare the incidence of false 'isolated positives' in liquid and solid media and their potential impact on the primary efficacy results. All post-treatment positive cultures were reviewed in the REMoxTB clinical trial. Logistic regression models were used to model the incidence of isolated positive cultures on MGIT and LJ. A total of 12,209 sputum samples were available from 1652 patients; cultures were more often positive on MGIT than LJ. In 1322 patients with a favourable trial outcome, 126 (9.5%) had cultures that were positive in MGIT compared to 34 (2.6%) patients with positive cultures on LJ. Among patients with a favourable outcome, the incidence of isolated positives on MGIT differed by study laboratory (p cultures in some patients even after adjusting for laboratory, p cultures, positive MGIT cultures were more likely to be associated with higher grade TB symptoms reported within 7 days either side of sputum collection in patients with an

Spot sputum samples are at least as good as early morning samples for identifying Mycobacterium tuberculosis.

Science.gov (United States)

Murphy, Michael E; Phillips, Patrick P J; Mendel, Carl M; Bongard, Emily; Bateson, Anna L C; Hunt, Robert; Murthy, Saraswathi; Singh, Kasha P; Brown, Michael; Crook, Angela M; Nunn, Andrew J; Meredith, Sarah K; Lipman, Marc; McHugh, Timothy D; Gillespie, Stephen H

2017-10-27

The use of early morning sputum samples (EMS) to diagnose tuberculosis (TB) can result in treatment delay given the need for the patient to return to the clinic with the EMS, increasing the chance of patients being lost during their diagnostic workup. However, there is little evidence to support the superiority of EMS over spot sputum samples. In this new analysis of the REMoxTB study, we compare the diagnostic accuracy of EMS with spot samples for identifying Mycobacterium tuberculosis pre- and post-treatment. Patients who were smear positive at screening were enrolled into the study. Paired sputum samples (one EMS and one spot) were collected at each trial visit pre- and post-treatment. Microscopy and culture on solid LJ and liquid MGIT media were performed on all samples; those missing corresponding paired results were excluded from the analyses. Data from 1115 pre- and 2995 post-treatment paired samples from 1931 patients enrolled in the REMoxTB study were analysed. Patients were recruited from South Africa (47%), East Africa (21%), India (20%), Asia (11%), and North America (1%); 70% were male, median age 31 years (IQR 24-41), 139 (7%) co-infected with HIV with a median CD4 cell count of 399 cells/μL (IQR 318-535). Pre-treatment spot samples had a higher yield of positive Ziehl-Neelsen smears (98% vs. 97%, P = 0.02) and LJ cultures (87% vs. 82%, P = 0.006) than EMS, but there was no difference for positivity by MGIT (93% vs. 95%, P = 0.18). Contaminated and false-positive MGIT were found more often with EMS rather than spot samples. Surprisingly, pre-treatment EMS had a higher smear grading and shorter time-to-positivity, by 1 day, than spot samples in MGIT culture (4.5 vs. 5.5 days, P spot samples in those with unfavourable outcomes, there were no differences in smear or culture results, and positive results were not detected earlier in Kaplan-Meier analyses in either EMS or spot samples. Our data do not support the hypothesis that EMS

Public Notice: 2018-09 Kaplan Companies

Science.gov (United States)

EPA is providing notice of a proceeding to assess a Class II civil penalty for alleged violations of the Clean Water Act (Act). EPA is also providing notice of opportunity to comment on the proposed penalty assessment.

PREPARATIVE SKIN PREPARATION AND SURGICAL WOUND INFECTION

Directory of Open Access Journals (Sweden)

Anjanappa

2015-01-01

Full Text Available BACKGROUND AND OBJECTIVE: It is an established fact now that the normal skin of healthy human beings harbours a rich bacterial fl ora. Normally considered non - pathogenic , these organisms way be a potential source of infection of the surgical wound. Approximately 20% of the resident flora is beyond the reach of surgical scrubs and antiseptics. The goal of surgical preparation of the skin with antiseptics is to remove transient and pathogenic microorganisms on the skin surface and to reduce the resident flora to a low level. Povidone iodine (I odophors and chlorhexidine are most often used antiseptics for pre - operative skin preparation. OBJECTIVES : To evaluate the efficacy of povidone iodine alone and in combination with antiseptic agent containing alcoholic chlorhexidine in preoperative skin p reparation by taking swab culture. (2 To compare the rate of postoperative wound infection in both the groups. METHODS: One hundred patients (fifty in each group undergoing clean elective surgery with no focus of infection on the body were included in th e study. The pre - operative skin preparation in each group is done with the respective antiseptic regimen. In both the groups after application of antiseptics , sterile saline swab culture was taken immediately from site of incision. In cases which showed gr owth of organisms , the bacteria isolated were identified by their morphological and cultural characteristics. Grams staining , coagulase test and antibiotic sensitivity test were done wherever necessary and difference in colonization rates was determined as a measure of efficacy of antiseptic regimen. RESULTS: The results of the study showed that when compared to povidone iodine alone , using a combination of povidone iodine and alcoholic solution of chlorhexidine , the colonization rates of the site of incisi on were reduced significantly. As for the rate of post - operative wound infection , it is also proven that wound infections are also

Molecular dispersion energy parameters for alkali and halide ions in aqueous solution

International Nuclear Information System (INIS)

Reiser, S.; Deublein, S.; Hasse, H.; Vrabec, J.

2014-01-01

Thermodynamic properties of aqueous solutions containing alkali and halide ions are determined by molecular simulation. The following ions are studied: Li + , Na + , K + , Rb + , Cs + , F − , Cl − , Br − , and I − . The employed ion force fields consist of one Lennard-Jones (LJ) site and one concentric point charge with a magnitude of ±1 e. The SPC/E model is used for water. The LJ size parameter of the ion models is taken from Deublein et al. [J. Chem. Phys. 136, 084501 (2012)], while the LJ energy parameter is determined in the present study based on experimental self-diffusion coefficient data of the alkali cations and the halide anions in aqueous solutions as well as the position of the first maximum of the radial distribution function of water around the ions. On the basis of these force field parameters, the electric conductivity, the hydration dynamics of water molecules around the ions, and the enthalpy of hydration is predicted. Considering a wide range of salinity, this study is conducted at temperatures of 293.15 and 298.15 K and a pressure of 1 bar

A methodological approach for the biomechanical cause analysis of golf-related lumbar spine injuries.

Science.gov (United States)

Sim, Taeyong; Jang, Dong-Jin; Oh, Euichaul

2014-01-01

A new methodological approach employing mechanical work (MW) determination and relative portion of its elemental analysis was applied to investigate the biomechanical causes of golf-related lumbar spine injuries. Kinematic and kinetic parameters at the lumbar and lower limb joints were measured during downswing in 18 golfers. The MW at the lumbar joint (LJ) was smaller than at the right hip but larger than the MWs at other joints. The contribution of joint angular velocity (JAV) to MW was much greater than that of net muscle moment (NMM) at the LJ, whereas the contribution of NMM to MW was greater rather than or similar to that of JAV at other joints. Thus, the contribution of JAV to MW is likely more critical in terms of the probability of golf-related injury than that of NMM. The MW-based golf-related injury index (MWGII), proposed as the ratio of the contribution of JAV to MW to that of NMM, at the LJ (1.55) was significantly greater than those at other joints ( golf-related injuries around the lumbar spine. Therefore, both MW and MWGII should be considered when investigating the biomechanical causes of lumbar spine injuries.

Common fixed points in best approximation for Banach operator pairs with Ciric type I-contractions

Science.gov (United States)

Hussain, N.

2008-02-01

The common fixed point theorems, similar to those of Ciric [Lj.B. Ciric, On a common fixed point theorem of a Gregus type, Publ. Inst. Math. (Beograd) (N.S.) 49 (1991) 174-178; Lj.B. Ciric, On Diviccaro, Fisher and Sessa open questions, Arch. Math. (Brno) 29 (1993) 145-152; Lj.B. Ciric, On a generalization of Gregus fixed point theorem, Czechoslovak Math. J. 50 (2000) 449-458], Fisher and Sessa [B. Fisher, S. Sessa, On a fixed point theorem of Gregus, Internat. J. Math. Math. Sci. 9 (1986) 23-28], Jungck [G. Jungck, On a fixed point theorem of Fisher and Sessa, Internat. J. Math. Math. Sci. 13 (1990) 497-500] and Mukherjee and Verma [R.N. Mukherjee, V. Verma, A note on fixed point theorem of Gregus, Math. Japon. 33 (1988) 745-749], are proved for a Banach operator pair. As applications, common fixed point and approximation results for Banach operator pair satisfying Ciric type contractive conditions are obtained without the assumption of linearity or affinity of either T or I. Our results unify and generalize various known results to a more general class of noncommuting mappings.

Jollrnal of EAEA, VoL lJ, 1996

African Journals Online (AJOL)

(voltage, current, resistance, inductance, capacitance) variation suitable for the signal conditioning system which may be a combination of a bridge circuit, an amplifier, an oscillator and a filter circuit. Signal conversion (analog to digital or digital to analog cooversion) is needed only when digital techniques are necessary.

LJ Best of 2009 Business Books: 32 Titles

Science.gov (United States)

Cords, Sarah Statz

2010-01-01

It should come as no surprise that a large share of this year's business books focus squarely on the 2008-09 financial crisis and security-backed mortgage implosion. Investing books followed the trend as either alarmist titles advocating selling stocks, or books urging readers to take advantage of this time to buy undervalued investments. An…

Implementation of the Thin Layer Agar Method for Diagnosis of Smear-Negative Pulmonary Tuberculosis in a Setting with a High Prevalence of Human Immunodeficiency Virus Infection in Homa Bay, Kenya▿ †

Science.gov (United States)

Martin, Anandi; Munga Waweru, Peter; Babu Okatch, Fred; Amondi Ouma, Naureen; Bonte, Laurence; Varaine, Francis; Portaels, Françoise

2009-01-01

The objective of this study was to evaluate the performance of a low-cost method, the thin layer agar (TLA) method, for the diagnosis of smear-negative patients. This prospective study was performed in Homa Bay District Hospital in Kenya. Out of 1,584 smear-negative sputum samples, 212 (13.5%) were positive by culture in Löwenstein-Jensen medium (LJ) and 220 (14%) were positive by the TLA method. The sensitivities of LJ and TLA were 71% and 74%, respectively. TLA could become an affordable method for the diagnosis of smear-negative tuberculosis in resource-limited settings, with results available within 2 weeks. PMID:19494065

Evaluation of BacT/Alert 3D Liquid Culture System for Recovery of Mycobacteria from Clinical Specimens Using Sodium Dodecyl (Lauryl) Sulfate-NaOH Decontamination

Science.gov (United States)

Carricajo, A.; Fonsale, N.; Vautrin, A. C.; Aubert, G.

2001-01-01

A total of 52 mycobacterial isolates were recovered from 1,197 clinical specimens decontaminated by a sodium dodecyl (lauryl) sulfate (SDS)-NaOH protocol. Of these, 94% were recovered with the BacT/Alert 3D system (Organon Teknika, Durham, N.C.) and 79% were recovered on Löwenstein-Jensen (LJ) medium. Mean times to detection of organisms of the Mycobacterium tuberculosis complex (n = 47) were 22.8 days with LJ medium and 16.2 days with the system. The BacT/Alert 3D system is a rapid and efficient detection system which can be used with an SDS-NaOH decontamination procedure. PMID:11574623

Case Study, California Black Rail (Laterallus jamaicensis corturniculus): Science Foundation Chapter 5, Appendix 5.1 in The Baylands and climate change: What can we do?

Science.gov (United States)

Evens, Jules G.; Thorne, Karen M.

2015-01-01

The Black Rail is the smallest member of the avian family Rallidae and has a wide-ranging but highly scattered distribution throughout the New World. Of five subspecies, two occur in North America—the Eastern Black Rail (L.j. jamaicensis) and the California Black Rail (L.j. coturniculus). Throughout its range, the Black Rail is a secretive inhabitant of tidal and freshwater wetlands and rarely ventures out from the cover of dense marsh vegetation. It is more likely to be heard than seen; spontaneous vocalizations tend to be concentrated in the nesting season and are much less common during the rest of the year.

Perturbation and variational approach for the equation of state for hard-sphere and Lennard—Jones fluids

International Nuclear Information System (INIS)

Khasare, S.B.

2012-01-01

The present work uses the concept of a scaled particle along with the perturbation and variation approach, to develop an equation of state (EOS) for a mixture of hard sphere (HS), Lennard—Jones (LJ) fluids. A suitable flexible functional form for the radial distribution function G(R) is assumed for the mixture, with R as a variable. The function G(R) has an arbitrary parameter m and a different equation of state can be obtained with a suitable choice of m. For m = 0.75 and m = 0.83 results are close to molecular dynamics (MD) result for pure HS and LJ fluid respectively. (physics of gases, plasmas, and electric discharges)

Food preparation supplies predict children's family meal and home-prepared dinner consumption in low-income households.

Science.gov (United States)

Appelhans, Bradley M; Waring, Molly E; Schneider, Kristin L; Pagoto, Sherry L

2014-05-01

Frequent family meals and home food preparation are considered important for children's nutritional health and weight maintenance. This cross-sectional study tested whether these parent-driven behaviors are related to the availability of food preparation supplies in low-income urban households. Caregivers of children ages 6-13 provided information on family meal frequency, child consumption of home-prepared dinners, household food insecurity, and attitudes towards cooking. Researchers used a newly developed Food Preparation Checklist (FPC) to assess the availability of 41 food preparation supplies during a physical audit of the home environment. Caregivers and children provided anthropometric measurements and jointly reported on child dietary intake. In ordinal logistic regression models, greater home availability of food preparation supplies was associated with more frequent family meals and child consumption of home-prepared dinners. Associations were independent of household financial strain, food insecurity, caregiver attitudes toward cooking, and sociodemographic characteristics. Fewer food preparation supplies were available in households characterized by greater food insecurity, lower income, and negative caregiver attitudes towards cooking, but did not differ by child or caregiver weight status. As in prior studies, more frequent family meals and consumption of home-prepared dinners were associated with healthier child dietary intake in several areas. We conclude that food preparation supplies are often limited in the most socioeconomically disadvantaged households, and their availability is related to the frequency with which children consume family meals and home-prepared dinners. The potential role of food preparation supplies as contributors to socioeconomic disparities in child nutritional health and obesity deserves further study. Copyright © 2014 Elsevier Ltd. All rights reserved.

Bowel preparation for CT colonography

International Nuclear Information System (INIS)

Neri, Emanuele; Lefere, Philippe; Gryspeerdt, Stefaan; Bemi, Pietro; Mantarro, Annalisa; Bartolozzi, Carlo

2013-01-01

Bowel preparation represents an essential part of CT colonography, as the accuracy of the exam is strongly related to the adequacy of colonic cleansing, and a poor bowel preparation may compromise the diagnostic quality even despite optimization of all other acquisition parameters. Residual stool and fluid in the large bowel may affect the interpretation of the exam and may increase the number of false positives and false negatives. In this regard, the majority of patients having undergone CT colonography state that bowel preparation is the most unpleasant part. Unfortunately, to date no definite consensus has been reached about the ideal bowel preparation technique, and there is great variability in preparation strategies across diagnostic centers. The purpose of this review article is to describe the development and evolution of bowel preparation techniques in order to choose the best approach for optimizing the diagnostic quality of CT colonography in each patient

Bowel preparation for CT colonography

Energy Technology Data Exchange (ETDEWEB)

Neri, Emanuele, E-mail: emanuele.neri@med.unipi.it [Diagnostic and Interventional Radiology, University of Pisa (Italy); Lefere, Philippe; Gryspeerdt, Stefaan [Department of Radiology, Stedelijk Ziekenhuis, Roeselare (Belgium); Bemi, Pietro; Mantarro, Annalisa; Bartolozzi, Carlo [Diagnostic and Interventional Radiology, University of Pisa (Italy)

2013-08-15

Bowel preparation represents an essential part of CT colonography, as the accuracy of the exam is strongly related to the adequacy of colonic cleansing, and a poor bowel preparation may compromise the diagnostic quality even despite optimization of all other acquisition parameters. Residual stool and fluid in the large bowel may affect the interpretation of the exam and may increase the number of false positives and false negatives. In this regard, the majority of patients having undergone CT colonography state that bowel preparation is the most unpleasant part. Unfortunately, to date no definite consensus has been reached about the ideal bowel preparation technique, and there is great variability in preparation strategies across diagnostic centers. The purpose of this review article is to describe the development and evolution of bowel preparation techniques in order to choose the best approach for optimizing the diagnostic quality of CT colonography in each patient.

Prepare Healthy Foods with Toddlers

Science.gov (United States)

Izumi-Taylor, Satomi; Rike, Cheryl

2011-01-01

Toddlers--from about 16 to 36 months--can learn a variety of skills as they prepare food and follow recipes in developmentally appropriate ways. Early childhood teachers are encouraged to support young children's healthy eating habits by offering simple food preparation experiences. When toddlers--and preschoolers--safely prepare healthy snacks,…

Disease: H01652 [KEGG MEDICUS

Lifescience Database Archive (English)

Full Text Available H01652 Seborrheic dermatitis Seborrheic Dermatitis (SD) is a common inflammatory d...ption, pathogen) ... AUTHORS ... Borda LJ, Wikramanayake TC ... TITLE ... Seborrheic Dermatitis

Methods for preparing synthetic freshwaters.

Science.gov (United States)

Smith, E J; Davison, W; Hamilton-Taylor, J

2002-03-01

Synthetic solutions that emulate the major ion compositions of natural waters are useful in experiments aimed at understanding biogeochemical processes. Standard recipes exist for preparing synthetic analogues of seawater, with its relatively constant composition, but, due to the diversity of freshwaters, a range of compositions and recipes is required. Generic protocols are developed for preparing synthetic freshwaters of any desired composition. The major problems encountered in preparing hard and soft waters include dissolving sparingly soluble calcium carbonate, ensuring that the ionic components of each concentrated stock solution cannot form an insoluble salt and dealing with the supersaturation of calcium carbonate in many hard waters. For acidic waters the poor solubility of aluminium salts requires attention. These problems are overcome by preparing concentrated stock solutions according to carefully designed reaction paths that were tested using a combination of experiment and equilibrium modeling. These stock solutions must then be added in a prescribed order to prepare a final solution that is brought into equilibrium with the atmosphere. The example calculations for preparing hard, soft and acidic freshwater surrogates with major ion compositions the same as published analyses, are presented in a generalized fashion that should allow preparation of any synthetic freshwater according to its known analysis.

Communication Games Reveal Preparation Contextuality

Science.gov (United States)

Hameedi, Alley; Tavakoli, Armin; Marques, Breno; Bourennane, Mohamed

2017-12-01

A communication game consists of distributed parties attempting to jointly complete a task with restricted communication. Such games are useful tools for studying limitations of physical theories. A theory exhibits preparation contextuality whenever its predictions cannot be explained by a preparation noncontextual model. Here, we show that communication games performed in operational theories reveal the preparation contextuality of that theory. For statistics obtained in a particular family of communication games, we show a direct correspondence with correlations in spacelike separated events obeying the no-signaling principle. Using this, we prove that all mixed quantum states of any finite dimension are preparation contextual. We report on an experimental realization of a communication game involving three-level quantum systems from which we observe a strong violation of the constraints of preparation noncontextuality.

Integrated Work Management: Preparer, Course 31883

Energy Technology Data Exchange (ETDEWEB)

Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-08-07

The preparer (also called the “planner”) plays a key role in the integrated work management (IWM) process at Los Alamos National Laboratory (LANL). This course, Integrated Work Management: Preparer (COURSE 31883), describes the IWM roles and responsibilities of the preparer. This course also discusses IWM requirements that must be met by the preparer.

Hepatorenal syndrome

Science.gov (United States)

... 2016:chap 153. Nevah MI, Fallon MB. Hepatic encephalopathy, hepatorenal syndrome, hepatopulmonary syndrome, and other systemic complications of liver disease. In: Feldman M, Friedman LS, Brandt LJ, ...

Documents preparation and review

International Nuclear Information System (INIS)

1999-01-01

Ignalina Safety Analysis Group takes active role in assisting regulatory body VATESI to prepare various regulatory documents and reviewing safety reports and other documentation presented by Ignalina NPP in the process of licensing of unit 1. The list of main documents prepared and reviewed is presented

Big Bang Cosmic Titanic: Cause for Concern?

Science.gov (United States)

Gentry, Robert

2013-04-01

This abstract alerts physicists to a situation that, unless soon addressed, may yet affect PRL integrity. I refer to Stanley Brown's and DAE Robert Caldwell's rejection of PRL submission LJ12135, A Cosmic Titanic: Big Bang Cosmology Unravels Upon Discovery of Serious Flaws in Its Foundational Expansion Redshift Assumption, by their claim that BB is an established theory while ignoring our paper's Titanic, namely, that BB's foundational spacetime expansion redshifts assumption has now been proven to be irrefutably false because it is contradicted by our seminal discovery that GPS operation unequivocally proves that GR effects do not produce in-flight photon wavelength changes demanded by this central assumption. This discovery causes the big bang to collapse as quickly as did Ptolemaic cosmology when Copernicus discovered its foundational assumption was heliocentric, not geocentric. Additional evidence that something is amiss in PRL's treatment of LJ12135 comes from both Brown and EiC Gene Spouse agreeing to meet at my exhibit during last year's Atlanta APS to discuss this cover-up issue. Sprouse kept his commitment; Brown didn't. Question: If Brown could have refuted my claim of a cover-up, why didn't he come to present it before Gene Sprouse? I am appealing LJ12135's rejection.

Genotyping did not evidence any contribution of Mycobacterium bovis to human tuberculosis in Brazil.

Science.gov (United States)

Rocha, Adalgiza; Elias, Atina R; Sobral, Luciana F; Soares, Diego F; Santos, Alexandre C; Marsico, Ana-Grazia; Hacker, Mariana A; Caldas, Paulo C; Parente, Luiz C; Silva, Marcio R; Fonseca, Leila; Suffys, Philip; Boéchat, Neio

2011-01-01

The contribution of Mycobacterium bovis to the global burden of tuberculosis (TB) in man is likely to be underestimated due to its dysgonic growth characteristics and because of the absence of pyruvate in most used media is disadvantageous for its primary isolation. In Brazil Mycobacterium culture, identification and susceptibility tests are performed only in TB reference centers, usually for selected cases. Moreover, solid, egg-based, glycerol-containing (without pyruvate supplementation) Löwenstein-Jensen (L-J) or Ogawa media are routinely used, unfavouring M. bovis isolation. To determine the importance of M. bovis as a public health threat in Brazil we investigated 3046 suspected TB patients inoculating their clinical samples onto routine L-J and L-J pyruvate enriched media. A total of 1796 specimens were culture positive for Mycobacterium spp. and 702 TB cases were confirmed. Surprisingly we did not detect one single case of M. bovis in the resulting collection of 1674 isolates recovered from M. bovis favourable medium analyzed by conventional and molecular speciation methods. Also, bacillary DNA present on 454 sputum smears from 223 TB patients were OxyR genotyped and none was recognized as M. bovis. Our data indicate that M. bovis importance on the burden of human TB in Brazil is marginal. Copyright © 2010 Elsevier Ltd. All rights reserved.

Comparison of a radiometric method (BACTEC) and conventional culture media for recovery of mycobacteria from smear-negative specimens

International Nuclear Information System (INIS)

Morgan, M.A.; Horstmeier, C.D.; DeYoung, D.R.; Roberts, G.D.

1983-01-01

The BACTEC system and three conventional media (Middlebrook 7H10, selective Middlebrook 7H11 [S7H11], and Lowenstein-Jensen [LJ] were compared for their mean recovery times and recovery rates of mycobacteria from acid-fast, smear-negative clinical specimens. Of the 71 smear-negative, culture-positive specimens recovered from 2,165 submitted smear-negative cultures, the BACTEC system detected 71.8%, compared with 88.7% for the conventional three-medium system. When media were individually compared, BACTEC medium (Middlebrook 7H12) was more successful in recovering mycobacteria (71.8%) than was LJ (62%), Middlebrook medium 7H10 (55.9%), or Middlebrook S7H11 medium (52.1%). Middlebrook 7H11 medium containing sodium selenate was also evaluated and did not increase the recovery rate or decrease the recovery time of mycobacterial species when compared with LJ, Middlebrook 7H10, S7H11, and 7H12 media. The mean detection time for the BACTEC system was less than that by conventional methods for the seven species of mycobacteria recovered. Detection times for Mycobacterium tuberculosis on the BACTEC system and conventional cultural systems were 13.7 and 26.3 days, respectively

Mental and Active Preparation: Examining Variations in Women's Processes of Preparing to Leave Abusive Relationships.

Science.gov (United States)

Bermea, Autumn M; Khaw, Lyndal; Hardesty, Jennifer L; Rosenbloom, Lindsay; Salerno, Craig

2017-02-01

Although the process of leaving abusive relationships has received increased research attention, preparing to leave is still largely understudied. Despite an emphasis on safety planning, not all women take active steps to prepare, and the characteristics and experiences of those who do or do not actively prepare are unknown. We address this gap with a secondary data analysis of interviews with 25 abused mothers in the process of leaving. All women initially engaged in mental planning, where they had emotionally disconnected from their partners. Using constructivist grounded theory techniques, we identified two distinct groups: those whose mental planning led to active planning ( n = 11), and those who moved directly from mental planning to leaving ( n = 14) with little time or need to actively plan. The groups differed on several individual, relationship, and child factors, which may have impacted the ability or decisions to prepare. This study supports the feminist view that survivors are not helpless victims but active agents who strategize for safety. Those who engage solely in mental planning still prepare to leave, even if they do not engage in active planning. Practitioners should consider factors affecting preparations and acknowledge mental planning as a necessary effort in leaving.

Loss of brain function - liver disease

Science.gov (United States)

Hepatic coma; Encephalopathy - hepatic; Hepatic encephalopathy; Portasystemic encephalopathy ... 2017:417-421. Nevah MI, Fallon MB. Hepatic encephalopathy, hepatorenal ... of liver disease. In: Feldman M, Friedman LS, Brandt LJ, ...

Reactor operation plan preparing device

International Nuclear Information System (INIS)

Sano, Hiroki; Maruyama, Hiromi; Kinoshita, Mitsuo; Fukuzaki, Koji; Banto, Masaru; Fukazawa, Yukihisa.

1993-01-01

The device comprises a means for retrieving a control rod pattern capable of satisfying a thermal limit upon aimed power/minimum flow rate and providing minimum xenon and a control rod pattern maximum xenon. It further comprises a means for selecting a control rod pattern corresponding to a xenon equilibrium condition, and selecting a control rod which provides a greater thermal margin to provide a control rod operation sequence for each of the patterns. Further, the device comprises an outline plan preparing means and a correction means therefor, a simplified sequence table reference means operated along with sequence change, an operation limit region input means, a control rod operation preferential region changing means, a thermal margin evaluation region and an input means. This can automatically prepare the operation plan, decrease the times for preparation of detailed plans by using the outline plan preparing function, thereby enabling to remarkably shorten the time for preparing of an operation plan. (N.H.)

Preparation of shaped bodies

International Nuclear Information System (INIS)

Sutcliffe, P.W.; Isaacs, J.W.; Lyon, C.E.

1979-01-01

A method for the preparation of a shaped body includes pressing a powder to give a 'green' shaped body, the powder having been made by comminuting a material prepared by means of a gelation process, the material prior to comminuting being of a selected physical configuration (e.g. spherical). Thus, a material prepared by means of a gelation process can be transported and handled in an environmentally desirable, substantially dust-free form (e.g. spherical particles) and then comminuted to produce a powder for pressing into e.g. a shaped nuclear fuel body (e.g. pellets of (70%U/30%Pu)O 2 ), which can be sintered. (author)

STRUCTURAL ANALYSIS OF CONDITIONAL PREPARATION IN JUDO

Directory of Open Access Journals (Sweden)

Slavko Obadov

2006-06-01

Full Text Available Conditional preparation is a constituent part of overall sports preparation. Conditional training might be defined as a process of improvement of a sportsman’s functional and motor abilities, morphological characteristics, health, as well as the required motor knowledge. Conditional preparation can be might be classified as: general, basic and situational conditional preparation. Programs of the conditional training might be classified as: developing, resuming, recovering, preventive and recovering ones. High level of the general physical preparation enables maximum demonstration of the physical abilities of a sportsman during the stage of improvement of the specific motor abilities. Good general preparation of a sportsman enables him to push beyond his functional limits in order to cope with heavy loads easier, which subsequently enables him to achieve top performance level. Basic conditional preparation assumes the development of the most important judo abilities. Specific conditional preparation is related directly to the execution of different structural elements under the conditional requirements. Situational conditional preparation enables integration of the tactical and conditional training.

Preparation methodology of radiation - curable resin

International Nuclear Information System (INIS)

Dahlan bin Haji Mohd; Hussin bin Mohd Nor; Mohamad Hilmi bin Mahmood.

1989-01-01

Two types of unsaturated polyester have been prepared according to normal alkyd methods of preparation. In this work the emphasis has been given to the preparation methodology of unsaturated polyesters in styrene. Their molecule weight distributions fall between normal alkyd's i.e. 2500 to 3500. (author)

Diverticulitis - what to ask your doctor

Science.gov (United States)

Bhuket TP, Stollman NH. Diverticular disease of the colon. In: Feldman M, Friedman LS, Brandt LJ, eds. Sleisenger & Fordtran's Gastrointestinal and Liver Disease . 10th ed. Philadelphia, PA: Elsevier Saunders; ...

Diverticulosis

Science.gov (United States)

Bhuket TP, Stollman NH. Diverticular disease of the colon. In: Feldman M, Friedman LS, Brandt LJ, eds. Sleisenger and Fordtran's Gastrointestinal and Liver Disease . 10th ed. Philadelphia, PA: Elsevier ...

Diverticulitis and diverticulosis - discharge

Science.gov (United States)

Bhuket TP, Stollman NH. Diverticular disease of the colon. In: Feldman M, Friedman LS, Brandt LJ, eds. Sleisenger and Fordtran's Gastrointestinal and Liver Disease . 10th ed. Philadelphia, PA: Elsevier ...

Diverticulitis

Science.gov (United States)

Bhuket TP, Stollman NH. Diverticular disease of the colon. In: Feldman M, Friedman LS, Brandt LJ, eds. Sleisenger and Fordtran's Gastrointestinal and Liver Disease . 10th ed. Philadelphia, PA: Elsevier ...

Two-dimensional preparative liquid chromatography system for preparative separation of minor amount components from complicated natural products

Energy Technology Data Exchange (ETDEWEB)

Qiu, Ying-Kun, E-mail: qyk@xmu.edu.cn; Chen, Fang-Fang; Zhang, Ling-Ling; Yan, Xia; Chen, Lin; Fang, Mei-Juan; Wu, Zhen, E-mail: wuzhen@xmu.edu.cn

2014-04-01

Highlights: • Preparative MDLC system was developed for separation of complicated natural products. • Medium-pressure LC and preparative HPLC were connected by interface of SPE. • Automated multi-step preparative separation of 25 compounds was achieved by using this system. - Abstract: An on-line comprehensive two-dimensional preparative liquid chromatography system was developed for preparative separation of minor amount components from complicated natural products. Medium-pressure liquid chromatograph (MPLC) was applied as the first dimension and preparative HPLC as the second one, in conjunction with trapping column and makeup pump. The performance of the trapping column was evaluated, in terms of column size, dilution ratio and diameter-height ratio, as well as system pressure from the view of medium pressure liquid chromatograph. Satisfactory trapping efficiency can be achieved using a commercially available 15 mm × 30 mm i.d. ODS pre-column. The instrument operation and the performance of this MPLC × preparative HPLC system were illustrated by gram-scale isolation of crude macro-porous resin enriched water extract of Rheum hotaoense. Automated multi-step preparative separation of 25 compounds, whose structures were identified by MS, {sup 1}H NMR and even by less-sensitive {sup 13}C NMR, could be achieved in a short period of time using this system, exhibiting great advantages in analytical efficiency and sample treatment capacity compared with conventional methods.

40 CFR 761.323 - Sample preparation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Sample preparation. 761.323 Section... Remediation Waste Samples § 761.323 Sample preparation. (a) The comparison study requires analysis of a... concentrations by dilution. Any excess material resulting from the preparation of these samples, which is not...

48 CFR 252.237-7011 - Preparation history.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Preparation history. 252... Provisions And Clauses 252.237-7011 Preparation history. As prescribed in 237.7003(b), use the following clause: Preparation History (DEC 1991) For each body prepared, or for each casket handled in a group...

Surface preparation of niobium

International Nuclear Information System (INIS)

Kneisel, P.

1980-01-01

Any discussion of surface preparation for superconducting rf-surfaces is certainly connected with the question what is the best recipe for achieving high Q-values and high break-down fields. Since the break-down in a cavity is not understood so far and because several mechanisms play a role, it also is not possible to give one recipe which always works. Nevertheless in the past certain preparation techniques for niobium surfaces have been developed and certain rules for preparation can be applied. In the following the to-days state of the art will be described and it is attempted to give a short description of the surface in conjunction with the methods of surface treatments, which generally can be applied to niobium cavities. (orig./WTR)

Preparation of bromine fluoride; Preparation du fluorure de brome

Energy Technology Data Exchange (ETDEWEB)

Domange, Pr; Duflo, J.

1958-05-15

This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided.

Applying Kaplan-Meier to Item Response Data

Science.gov (United States)

McNeish, Daniel

2018-01-01

Some IRT models can be equivalently modeled in alternative frameworks such as logistic regression. Logistic regression can also model time-to-event data, which concerns the probability of an event occurring over time. Using the relation between time-to-event models and logistic regression and the relation between logistic regression and IRT, this…

Kaplan Extended V2 SST anomaly data

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data is processed at Lamont-Doherty using a optimal analysis scheme. This dataset is different than previously archived version from Nov 1981 due to a different NCEP...

Teachers' Self-Assessed Level of Preparation

Science.gov (United States)

White, Susan

2013-01-01

We asked high school physics teachers to assess their level of preparation across a number of domains. Almost all (98%) reported feeling adequately or well prepared in terms of their basic physics knowledge. The chart presents teachers' responses to their self-assessed level of preparation in six different areas. Almost all feel at least…

Beer as colon lavage preparation

International Nuclear Information System (INIS)

Kinnunen, J.; Linden, H.; Pietilae, J.; Juutilainen, T.

1987-01-01

Six patients received beer preparation prior to double contrast barium enema. The beer group scored slightly better (though not statistically significantly) both in the cleanliness and in the mucosal coating of the bowel than the control group with standard preparation. The fluid balance was unaltered. The patients in the beer group felt surprisingly well, likely due to the good fluid and energy balance provided by the beer. The beer preparation could be used in cases, when the patients are ready to intake beer and want to maintain a good nutritional status. (orig.) [de

CalCOFI Larvae Counts, Scientific Names LJ to MA

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Fish larvae counts and standardized counts for larvae captured in CalCOFI icthyoplankton nets (primarily vertical [Calvet or Pairovet], oblique [bongo or ring nets],...

Steven MacCall: Winner of LJ's 2010 Teaching Award

Science.gov (United States)

Berry, John N., III

2010-01-01

This article profiles Steven L. MacCall, winner of "Library Journal's" 2010 Teaching Award. An associate professor at the School of Library and Information Studies (SLIS) at the University of Alabama, Tuscaloosa, MacCall was nominated by Kathie Popadin, known as "Kpop" to the members of her cohort in the online MLIS program at SLIS. Sixteen of…

Personnel Preparation.

Science.gov (United States)

Fair, George, Ed.; Stodden, Robert, Ed.

1981-01-01

Three articles comprise a section on personnel preparation in vocational education. Articles deal with two inservice programs in career/vocational education for the handicapped and a project to train paraprofessionals to assist special educators in vocational education. (CL)

Physiologic effects of bowel preparation

DEFF Research Database (Denmark)

Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård

2004-01-01

healthy volunteers (median age, 63 years) underwent bowel preparation with bisacodyl and sodium phosphate. Fluid and food intake were standardized according to weight, providing adequate calorie and oral fluid intake. Before and after bowel preparation, weight, exercise capacity, orthostatic tolerance...

Phentermine and Pregnancy

Science.gov (United States)

... paternal- exposures- pregnancy/ pdf/ . References: Aronne LJ. 1998. Obesity. Womens Health Issues 82(1):161- 181. Hale TW. 2008. Medications and Mothers’ Milk, 13th ed. Amarillo, TX: Hale Publishing. Johnson KA, ...

TFTR DT preparation project status

Energy Technology Data Exchange (ETDEWEB)

Perry, E.D.; Dudek, L.E.

1993-11-01

The Tokamak Fusion Test Reactor (TFTR) research program is preparing to commence the first high power Deuterium-Tritium (DT) experiments of the US Fusion Program. Hardware upgrades to TFTR required for DT operations have been completed. This paper discusses these hardware preparations.

Physiologic effects of bowel preparation

DEFF Research Database (Denmark)

Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård

2004-01-01

PURPOSE: Despite the universal use of bowel preparation before colonoscopy and colorectal surgery, the physiologic effects have not been described in a standardized setting. This study was designed to investigate the physiologic effects of bowel preparation. METHODS: In a prospective study, 12...

A strategy to find minimal energy nanocluster structures.

Science.gov (United States)

Rogan, José; Varas, Alejandro; Valdivia, Juan Alejandro; Kiwi, Miguel

2013-11-05

An unbiased strategy to search for the global and local minimal energy structures of free standing nanoclusters is presented. Our objectives are twofold: to find a diverse set of low lying local minima, as well as the global minimum. To do so, we use massively the fast inertial relaxation engine algorithm as an efficient local minimizer. This procedure turns out to be quite efficient to reach the global minimum, and also most of the local minima. We test the method with the Lennard-Jones (LJ) potential, for which an abundant literature does exist, and obtain novel results, which include a new local minimum for LJ13 , 10 new local minima for LJ14 , and thousands of new local minima for 15≤N≤65. Insights on how to choose the initial configurations, analyzing the effectiveness of the method in reaching low-energy structures, including the global minimum, are developed as a function of the number of atoms of the cluster. Also, a novel characterization of the potential energy surface, analyzing properties of the local minima basins, is provided. The procedure constitutes a promising tool to generate a diverse set of cluster conformations, both two- and three-dimensional, that can be used as an input for refinement by means of ab initio methods. Copyright © 2013 Wiley Periodicals, Inc.

Translational and rotational diffusion of dilute solid amorphous spherical nanocolloids by molecular dynamics simulation

Science.gov (United States)

Heyes, D. M.; Nuevo, M. J.; Morales, J. J.

Following on from our previous study (Heyes, D. M., Nuevo, M. J, and Morales, J. J., 1996, Molec. Phys., 88, 1503), molecular dynamics simulations have been carried out of translational and rotational diffusion of atomistically rough near-spherical solid Lennard-Jones (LJ) clusters immersed in a Weeks-Chandler-Andersen liquid solvent. A single cluster consisting of up to about 100LJ particles as part of an 8000 atom fluid system was considered in each case. The translational and rotational diffusion coefficients decrease with increasing cluster size and solvent density (roughly in proportion to the molar volume of the solvent). The simulations reveal that for clusters in excess of about 30LJ atoms there is a clear separation of timescales between angular velocity and orientation relaxation which adhere well to the small-step diffusion model encapsulated in Hubbard's relationship. For 100 atom clusters both the StokesEinstein (translation) and Stokes-Einstein-Debye (rotation) equations apply approximately. The small departures from these reference solutions indicate that the translational relaxation experiences a local viscosity in excess of the bulk value (typically by ~ 30%), whereas rotational relaxation experiences a smaller viscosity than the bulk (typically by ~ 30%) reasonably in accord with the Gierer-Wirtz model. Both of these observations are consistent with an observed layering of the liquid molecules next to the cluster observed in our previous study.

Tuberculosis patients co-infected with Mycobacterium bovis and Mycobacterium tuberculosis in an urban area of Brazil.

Science.gov (United States)

Silva, Marcio Roberto; Rocha, Adalgiza da Silva; da Costa, Ronaldo Rodrigues; de Alencar, Andrea Padilha; de Oliveira, Vania Maria; Fonseca Júnior, Antônio Augusto; Sales, Mariana Lázaro; Issa, Marina de Azevedo; Filho, Paulo Martins Soares; Pereira, Omara Tereza Vianello; dos Santos, Eduardo Calazans; Mendes, Rejane Silva; Ferreira, Angela Maria de Jesus; Mota, Pedro Moacyr Pinto Coelho; Suffys, Philip Noel; Guimarães, Mark Drew Crosland

2013-05-01

In this cross-sectional study, mycobacteria specimens from 189 tuberculosis (TB) patients living in an urban area in Brazil were characterised from 2008-2010 using phenotypic and molecular speciation methods (pncA gene and oxyR pseudogene analysis). Of these samples, 174 isolates simultaneously grew on Löwenstein-Jensen (LJ) and Stonebrink (SB)-containing media and presented phenotypic and molecular profiles of Mycobacterium tuberculosis, whereas 12 had molecular profiles of M. tuberculosis based on the DNA analysis of formalin-fixed paraffin wax-embedded tissue samples (paraffin blocks). One patient produced two sputum isolates, the first of which simultaneously grew on LJ and SB media and presented phenotypic and molecular profiles of M. tuberculosis, and the second of which only grew on SB media and presented phenotypic profiles of Mycobacterium bovis. One patient provided a bronchial lavage isolate, which simultaneously grew on LJ and SB media and presented phenotypic and molecular profiles of M. tuberculosis, but had molecular profiles of M. bovis from paraffin block DNA analysis, and one sample had molecular profiles of M. tuberculosis and M. bovis identified from two distinct paraffin blocks. Moreover, we found a low prevalence (1.6%) of M. bovis among these isolates, which suggests that local health service procedures likely underestimate its real frequency and that it deserves more attention from public health officials.

Protective Effect of Laminaria japonica with Probiotics on Murine Colitis

Directory of Open Access Journals (Sweden)

Seok-Jae Ko

2014-01-01

Full Text Available Inflammatory bowel disease (IBD is a chronically relapsing inflammatory disorder of the gastrointestinal tract. Most IBD treatments are unsatisfactory; therefore, various dietary supplements have emerged as promising interventions. Laminaria japonica (LJ is an edible seaweed used to regulate digestive symptoms. Probiotics have been reported to improve digestive problems and their simultaneous administration with seaweeds has been shown to produce synergistic therapeutic effects. Here, we investigated the effect of LJ combination with probiotics on dextran sodium sulfate-induced colitis model in mice. Aqueous LJ extracts (LJE at doses from 100 to 300 mg/kg and probiotics at a dose of 300 mg/kg were orally administered for 7 days. Body weight, colon length, histological score, macroscopic damage, and the levels of cytokines IFN-γ, IL-1β, IL-6, IL-10, IL-12 (P40, IL-12 (P70, IL-17, and TNF-α were assessed. LJE alone caused a significant improvement of colitis signs such as colon length, histological score, and IL-1β and IL-6 production. LJE and probiotics demonstrated a synergistic effect by the histological score and levels of IL-1β, IL-6, and IL-12 (P40 but not IFN-γ, IL-10, and IL-12 (P70. In conclusion, LJE was effective in inducing protection against colitis in mice and acted synergistically with probiotics.

Tuberculosis patients co-infected with Mycobacterium bovis and Mycobacterium tuberculosis in an urban area of Brazil

Directory of Open Access Journals (Sweden)

Marcio Roberto Silva

2013-05-01

Full Text Available In this cross-sectional study, mycobacteria specimens from 189 tuberculosis (TB patients living in an urban area in Brazil were characterised from 2008-2010 using phenotypic and molecular speciation methods (pncA gene and oxyR pseudogene analysis. Of these samples, 174 isolates simultaneously grew on Löwenstein-Jensen (LJ and Stonebrink (SB-containing media and presented phenotypic and molecular profiles of Mycobacterium tuberculosis, whereas 12 had molecular profiles of M. tuberculosis based on the DNA analysis of formalin-fixed paraffin wax-embedded tissue samples (paraffin blocks. One patient produced two sputum isolates, the first of which simultaneously grew on LJ and SB media and presented phenotypic and molecular profiles of M. tuberculosis, and the second of which only grew on SB media and presented phenotypic profiles of Mycobacterium bovis. One patient provided a bronchial lavage isolate, which simultaneously grew on LJ and SB media and presented phenotypic and molecular profiles of M. tuberculosis, but had molecular profiles of M. bovis from paraffin block DNA analysis, and one sample had molecular profiles of M. tuberculosis and M. bovis identified from two distinct paraffin blocks. Moreover, we found a low prevalence (1.6% of M. bovis among these isolates, which suggests that local health service procedures likely underestimate its real frequency and that it deserves more attention from public health officials.

Operating Room Fires and Surgical Skin Preparation.

Science.gov (United States)

Jones, Edward L; Overbey, Douglas M; Chapman, Brandon C; Jones, Teresa S; Hilton, Sarah A; Moore, John T; Robinson, Thomas N

2017-07-01

Operating room fires are "never events" that remain an under-reported source of devastating complications. One common set-up that promotes fires is the use of surgical skin preparations combined with electrosurgery and oxygen. Limited data exist examining the incidence of fires and surgical skin preparations. A standardized, ex vivo model was created with a 15 × 15 cm section of clipped porcine skin. An electrosurgical "Bovie" pencil was activated for 2 seconds on 30 Watts coagulation mode in 21% oxygen (room air), both immediately and 3 minutes after skin preparation application. Skin preparations with and without alcohol were tested, and were applied with and without pooling. Alcohol-based skin preparations included 70% isopropyl alcohol (IPA) with 2% chlorhexidine gluconate, 74% IPA with 0.7% iodine povacrylex, and plain 70% IPA. No fires occurred with nonalcohol-based preparations (p fires occurred in 38% (23 of 60) at 0 minutes and 27% (16 of 60) at 3 minutes. Alcohol-based skin preparations fuel operating room fires in common clinical scenarios. Following manufacturer guidelines and allowing 3 minutes for drying, surgical fires were still created in 1 in 10 cases without pooling and more than one-quarter of cases with pooling. Surgeons can decrease the risk of an operating room fire by using nonalcohol-based skin preparations or avoiding pooling of the preparation solution. Published by Elsevier Inc.

Femoral hernia repair

Science.gov (United States)

Dunbar KB, Jeyarajah DR. Abdominal hernias and gastric volvulus. In: Feldman M, Friedman LS, Brandt LJ, eds. Sleisenger and Fordtran's Gastrointestinal and Liver Disease . 10th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap ...

Preparation of alumina microspheres

International Nuclear Information System (INIS)

Santos, W.R. dos; Abrao, A.

1980-01-01

Inorganic exchangers are widely used for adsorption and column partition chromatography. The main difficulty of using commercial alumina (in powder) for column chromatography is related to its packing, and the operations through the column become diffcult and time-consuming; also it turns to be virtually impossible to use large dimension columns. In order to eliminate these problems, a process for the preparation of alumina micro-spheres was developed as an adaptation of a similar process used to prepare nuclear fuel microspheres (UO 2 , ThO 2 ). The flowsheet of this process is presented together with the analytical results of sphericity after calcination, granulometry, density and characterization by X-ray diffractometry. Solubility tests showed that the so-prepared microspheres are well resistant to strong acids and bases; retention tests showed their efficiency, mainly to copper. (C.L.B.) [pt

An automatic tooth preparation technique: A preliminary study

Science.gov (United States)

Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

2016-04-01

The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05-0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

Importance of polymerase chain reaction in diagnosis of pulmonary and extra-pulmonary tuberculosis

International Nuclear Information System (INIS)

Iqbal, S.; Ahmed, R.; Adhami, S.U.Z.

2011-01-01

Pakistan ranks eighth on the list of 22 high-burden tuberculosis (TB) countries in the world according to the World Health Organisation's (WHO) Global Tuberculosis Control 2009. Including other reasons the main cause is improper and late diagnosis of the disease. PCR may play an important role to control the disease with its rapid, sensitive and specific diagnosis. But in Pakistan due to lake of knowledge about this latest technique we are not using this technique appropriately. Clinicians still trust on conventional methods of TB diagnosis, which are time consuming or insensitive. The present study was arranged to highlight the importance of PCR in TB diagnosis in pulmonary and extra-pulmonary cases and its comparison with conventional methods. Methods: Samples obtained from 290 patients of suspected TB (pulmonary or extra-pulmonary) were subjected to ZN smear examination, LJ medium culture and PCR test by amplifying 541 bp fragment of Mycobacterium tuberculosis complex genome. The present prospective study is performed at Shalamar Hospital Lahore from November 2008 to November 2010. Results: A distinctly difference was observed in the test results done by PCR and other conventional techniques in pulmonary or extra-pulmonary tuberculosis samples (p<0.001). The sensitivity of different tests was 68.62% for PCR, 26.90% for LJ medium culture, and 14.14% for ZN smear examination (p<0.05). However, there was no significant difference between different tests as for as specificity was concerned. PCR test sensitivity in pulmonary and extra-pulmonary clinical samples was 78.34 and 61.76% respectively, being significantly higher (p<0.05) when compared with sensitivity of other tests. The mean detection time for M. tuberculosis was 25 days by LJ medium culture and less than 1 day by smear examination and PCR test. Conclusion: PCR test is more sensitive than ZN smear examination and LJ medium culture for the diagnosis of TB in pulmonary and extra-pulmonary clinical samples

Preparation of thin nuclear targets

International Nuclear Information System (INIS)

Muggleton, A.H.F.

1979-03-01

Thin film backings, sources and targets are needed for many applications in low energy nuclear physics and nuclear chemistry experiments. A survey of techniques used in the preparation of nuclear targets is first briefly discussed. These are classified as chemical, mechanical and physical preparations. Vacuum evaporation, being the most generally used technique, is discussed in detail. It is highly desirable to monitor the film thickness and control the deposition rate during evaporation and to measure the final target thickness after deposition has concluded. The relative merits of various thickness measuring techniques are described. Stages in the fabrication and mounting of self-supporting foils are described in detail, with emphasis given to the preparation of thin self-supporting carbon foils used as target backings and stripper foils. Various target backings, and the merits of the more generally used release agents are described in detail. The preparations of more difficult elemental targets are discussed, and a comprehensive list of the common targets is presented

News of the Year.

Science.gov (United States)

St. Lifer, Evan; Olson, Renee; Margolis, Rick; Glick, Andrea; Milliot, Jim

1999-01-01

Includes the following reports: "'LJ' (Library Journal) News Report: Libraries Success at Funding Books and Bytes"; "'SLJ' (School Library Journal) News Report: We're in the Money!"; and "'PW' (Publishers Weekly) News Reports". (AEF)

Disease: H01282 [KEGG MEDICUS

Lifescience Database Archive (English)

Full Text Available uba H, Ravel C, Seeler J, Achermann JC, McElreavey K ... TITLE ... Human male infertility...y LJ, Yan W, Lamb DJ, Matzuk MM ... TITLE ... Non-invasive genetic diagnosis of male infertility

Influence of chamber type integrated with computer-assisted semen analysis (CASA) system on the results of boar semen evaluation.

Science.gov (United States)

Gączarzewicz, D

2015-01-01

The objective of the study was to evaluate the effect of different types of chambers used in computer-assisted semen analysis (CASA) on boar sperm concentration and motility parameters. CASA measurements were performed on 45 ejaculates by comparing three commonly used chambers: Leja chamber (LJ), Makler chamber (MK) and microscopic slide-coverslip (SL). Concentration results obtained with CASA were verified by manual counting on a Bürker hemocytometer (BH). No significant differences were found between the concentrations determined with BH vs. LJ and SL, whereas higher (p0.05). The results obtained show that CASA assessment of boar semen should account for the effect of counting chamber on the results of sperm motility and concentration, which confirms the need for further study on standardizing the automatic analysis of boar semen.

Preparation of synthetic standard minerals

International Nuclear Information System (INIS)

Herrick, C.C.; Bustamante, S.J.; Charls, R.W.; Cowan, R.E.; Hakkila, E.A.; Hull, D.E.; Olinger, B.W.; Roof, R.B.; Sheinberg, H.; Herrick, G.C.

1978-01-01

A number of techniques for synthetic mineral preparations have been examined. These techniques include hot-pressing in graphite dies at moderate pressures, high-pressure, high-temperature synthesis in a piston and cylinder apparatus, isostatic pressing under helium gas pressures, hydrous mineral preparations using water as the pressure medium, explosion-generated shock waves, and radiofrequency heating. Minerals suitable for equation-of-state studies (three-inch, high-density discs), for thermodynamic property determinations (low-density powders) and for microprobe standards (fusion-cast microbeads) have been prepared. Mechanical stress-strain calculations in the piston-cylinder apparatus have been initiated and their integration with thermal stress calculations is currently under investigation

Materials Preparation Center

Data.gov (United States)

Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

A Simple Preparation of Hexadeuteriocholesterol

DEFF Research Database (Denmark)

Holm, Torkil; Crossland, Ingolf

1996-01-01

26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %.......26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %....

[Sample preparation and bioanalysis in mass spectrometry].

Science.gov (United States)

Bourgogne, Emmanuel; Wagner, Michel

2015-01-01

The quantitative analysis of compounds of clinical interest of low molecular weight (sample preparation. Sample preparation is a crucial part of chemical/biological analysis and in a sense is considered the bottleneck of the whole analytical process. The main objectives of sample preparation are the removal of potential interferences, analyte preconcentration, and converting (if needed) the analyte into a more suitable form for detection or separation. Without chromatographic separation, endogenous compounds, co-eluted products may affect a quantitative method in mass spectrometry performance. This work focuses on three distinct parts. First, quantitative bioanalysis will be defined, different matrices and sample preparation techniques currently used in bioanalysis by mass spectrometry of/for small molecules of clinical interest in biological fluids. In a second step the goals of sample preparation will be described. Finally, in a third step, sample preparation strategies will be made either directly ("dilute and shoot") or after precipitation.

Socioeconomic and other predictors of colonoscopy preparation quality.

Science.gov (United States)

Lebwohl, Benjamin; Wang, Timothy C; Neugut, Alfred I

2010-07-01

Suboptimal bowel preparation prior to colonoscopy is a common occurrence, with a deleterious impact on colonoscopy effectiveness. Established risk factors for suboptimal bowel preparation have been proposed, but social factors, such as socioeconomic status and marital status, have not been investigated. The aim of this study was to evaluate sociodemographic factors, including insurance status and marital status, as predictive of suboptimal preparation. We analyzed a database of 12,430 consecutive colonoscopies during a 28-month period at Columbia University Medical Center. We collected the following variables: age, gender, indication for colonoscopy, location (inpatient vs. outpatient), race, marital status, and Medicaid status. Preparation quality was recorded and dichotomized as optimal or suboptimal. We employed multivariate regression to determine independent risk factors for suboptimal bowel preparation. Among the 10,921 examinations in which bowel preparation was recorded, suboptimal preparation occurred in 34% of Medicaid patients versus 18% of non-Medicaid patients (P Married patients had decreased rates of suboptimal preparation (OR 0.89, 95% CI 0.80-0.98). Other variables associated with suboptimal preparation included increased age (OR per 10 years 1.09, 95% CI 1.05-1.14), male gender (OR 1.44, 95% CI 1.31-1.59), inpatient status (OR 1.51, 95% CI 1.26-1.80), and later time of day (OR 1.89, 95% CI 1.71-2.09). Unmarried status and Medicaid status are predictive of suboptimal bowel preparation. Future studies are warranted to identify how these social conditions predict bowel preparation quality and to implement interventions to optimize bowel preparation in vulnerable populations.

Preparing for evil.

Science.gov (United States)

Mitroff, Ian I; Alpaslan, Murat C

2003-04-01

How can you plan for every crisis that might occur, even for ones you can't imagine? The task seems so daunting and so limitless that many firms don't even start. In fact, as the authors' 20 years of research shows, three out of four Fortune 500 companies are prepared to handle only the types of calamities they've already suffered, and not even all of those. That's unfortunate because the research also shows that crisis-prepared companies fare better financially, have stronger reputations, and ultimately stay in business longer than their crisis prone counterparts. Crisis-prepared companies use a systematic approach to focus their efforts. In addition to planning for natural disasters, they divide man-made calamities into two sorts--accidental or "normal" ones, like the Exxon Valdez oil spill, and deliberate or "abnormal" ones, like product tampering. Then they take steps to broaden their thinking about such potential crises. They consider threats that would be common in other industries, for instance. And they seek input from outsiders such as investigative journalists and even reformed criminals. But if these companies think broadly about possible threats, they think narrowly about implementation. Each year, smart companies focus their resources and attention on a few facilities picked at random, just as airlines conduct detailed security checks on just a few passengers for each flight. That reduces the probability of an attack on the entire organization even as it allows the business to migrate steadily to a higher level of crisis readiness. Crisis-prepared companies know that disasters cannot be managed through cost-benefit analyses. It is precisely because the effects of a disaster cannot be predicted or controlled that smart companies focus their efforts on preventing crises rather than containing them after the fact.

Laboratory evaluation of commercial interferon preparations

International Nuclear Information System (INIS)

Schoub, B.D.; Lyons, S.F.; Crespi, M.; Chiu, M.-N.; Lomnitzer, R.

1983-01-01

The antiviral, antiproliferative and natural killer-cell (NKC) stimulatory activities of four commercial therapeutic interferon preparations were assayed in a laboratory. The antiviral and antiproliferative activities of each preparation were relatively similar, but an unexpectedly high NKC stimulatory activity was found in one of them. In-house determination of antiviral activity and evaluation of the antiproliferative and NKC stimulation potential of interferon preparations are essential before rational clinical trials of this agent are carried out

Preparation of venlafaxine hydrochloride sustained-release tablets

Directory of Open Access Journals (Sweden)

GUO Lingling

2013-08-01

Full Text Available To prepare venlafxine hydrochloride sustained-release tablets.Hydroxypropylmethyl cellulose(HPMC and methyl cellulose(MC were used as main materials to prepare sustained-release tablets of velafaxine hydrochloride and the influence of important factors on in vitro release curves of venlafaxine hydrochloride sustained-release tablets was investigated.Results:The optimal prescription included 100 mg HPMC,25 mg MC,and 2.5% glidant in one tablet prepared with 30kN.The tablets were prepared with the method of wet granulation by NO.16 mesh sieve.The tablets exhibited good sustained-release property in phosphate buffered solution (pH=6.8.The as-prepared venlafxine hydrochloride sustained-release tablets have good sustained-release property.

Diet - full liquid

Science.gov (United States)

... Water Fruit juices, including nectars and juices with pulp Butter, margarine, oil, cream, custard, and pudding Plain ... LJ, eds. Sleisenger and Fordtran's Gastrointestinal and Liver Disease: Pathophysiology/Diagnosis/Management . 10th ed. Philadelphia, PA: Elsevier ...

Obesity and kidney disease: hidden consequences of the epidemic

African Journals Online (AJOL)

SCIENTIFIC LETTERS ..... documentation of existing knowledge distilling the risk and the ... obese people, and new trials in this population to fill knowledge ..... Carey D, Appel LJ, Grams ME: Bariatric surgery is associated with improvement in.

Preparation and characterization of lamivudine microcapsules using ...

African Journals Online (AJOL)

Purpose: The objective of the present study was to prepare and evaluate microcapsules for the controlled release of lamivudine using various cellulose polymers. Methods: The microcapsules were prepared by the solvent evaporation method. The prepared microcapsules were characterized for the percent drug content, ...

Preparation of eugenol-based polyurethane

Science.gov (United States)

Li, Yupeng; Luo, Fang; Cheng, Chuanjie

2018-03-01

The regenerative eugenol was used as the starting material to prepare diol species by two steps, with a total yield of 28%. Furthermore, the prepared diol reacts with 1,6-hexadiisocyanate(HDI) to afford the corresponding polyurethane (PU). The structure of intermediates and PU are characterized by 1H-NMR or IR.

Everyday meal preparation for people with dementia

DEFF Research Database (Denmark)

Iversen, Mette Kathrine Friis; Nejsum, Hanne Lindberg; Bendtsen, Trine Vase

When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal preparat......When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal...... preparation as an activity for people with dementia but they have no combined material to base the planning of the activity on. The thesis of this project is that when persons with dementia is involved in cooking his or her own meal meal preparation it will contribute to the feeling of content and meaning...... preparation. The guide includes ideas for constructing recipes, methods for planning and guiding the process and examples of utensils that can increase the ability to cook in the persons own home or in an institutionalized setting. This supports the person with dementia both nutritionally, cognitively...

Effect of preparation conditions on physicochemical, surface and catalytic properties of cobalt ferrite prepared by coprecipitation

Energy Technology Data Exchange (ETDEWEB)

El-Shobaky, G.A., E-mail: elshobaky@yahoo.co [Physical Chemistry Department, National Research Center, Dokki, Cairo (Egypt); Turky, A.M.; Mostafa, N.Y.; Mohamed, S.K. [Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt)

2010-03-18

Cobalt ferrite nanoparticles were prepared via thermal treatment of cobalt-iron mixed hydroxides at 400-600 {sup o}C. The mixed hydroxides were coprecipitated from their nitrates solutions using NaOH as precipitating agent. The effects of pH and temperature of coprecipitation and calcination temperature on the physicochemical, surface and catalytic properties of the prepared ferrites were studied. The prepared systems were characterized using TG, DTG, DTA, chemical analysis, atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), energy dispersive X-ray (EDX) as well as surface and texture properties based on nitrogen adsorption-desorption isotherms. The prepared cobalt ferrites were found to be mesoporous materials that have crystallite size ranges between 8 and 45 nm. The surface and catalytic properties of the produced ferrite phase were strongly dependent on coprecipitation conditions of the mixed hydroxides and on their calcination temperature.

32 CFR 989.23 - Contractor prepared documents.

Science.gov (United States)

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Contractor prepared documents. 989.23 Section... PROTECTION ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.23 Contractor prepared documents. All Air Force... should reflect on the cover sheet they are an Air Force document. Contractor preparation information...

METALLOGRAPHIC SAMPLE PREPARATION STATION-CONSTRUCTIVE CONCEPT

Directory of Open Access Journals (Sweden)

AVRAM Florin Timotei

2016-11-01

Full Text Available In this paper we propose to present the issues involved in the case of the constructive conception of a station for metallographic sample preparation. This station is destined for laboratory work. The metallographic station is composed of a robot ABB IRB1600, a metallographic microscope, a gripping device, a manipulator, a laboratory grinding and polishing machine. The robot will be used for manipulation of the sample preparation and the manipulator take the sample preparation for processing.

Merging Expertise: Preparing Collaborative Educators

Science.gov (United States)

Altieri, Elizabeth M.; Colley, Kenna M.; Daniel, Leslie S.; Dickenson, Kathie W.

2015-01-01

In this article, teacher education faculty of a medium-size university, historically grounded in teacher preparation within a rural context, describe their ongoing work to transform their practice in order to prepare special and general educators who co-plan, co-teach, and co-assess with their counterparts in the field. Follow-up research with…

Pharmaceutical studies on and clinical application of olanzapine suppositories prepared as a hospital preparation

OpenAIRE

Matsumoto, Kazuaki; Kimura, Satoru; Takahashi, Kenichi; Yokoyama, Yuta; Miyazawa, Masayuki; Kushibiki, Satoko; Katamachi, Morio; Kizu, Junko

2016-01-01

Background A new formulation of olanzapine available for terminally ill patients is needed. Rectal administration using suppositories is an alternative for patients for whom administration via the oral route is not feasible. In the present study, we prepared olanzapine suppositories, and confirmed using pharmaceutical tests. Furthermore, we demonstrated the efficacy and safety of olanzapine suppositories in terminally ill patients. Methods We prepared olanzapine suppositories using bases cons...

Preparation Of Porous And Dense Bodies From Hydroxyapatite Powders Prepared Via Sol-Gel Technique

International Nuclear Information System (INIS)

Sopyan, Lis

2001-01-01

Hydroxyapatite (HA) ceramics is clinically proven and, thus, a reliable material for medical applications, that is, for use in dental and orthopedical surgery to fill cavities in bones. In this paper, we report a preliminary study on development of HA porous and dense materials manufactured using fine HA powders prepared via a sol-gel technique. In the preparation of HA porous bodies, slurries of the as-prepared powder were prepared with an adjusted loading ofHA, using Duramax of 0-3021 type as dispersant. After soaking cellulosic sponges into the slurry, the sponges were dried and then subjected to heat-treatment at 600 o C, followed by sintering at 1250 o C for I h. The apparent density of the porous bodies is 1.290 g/cm 3 , with a porosity of 59%. The sintering shrinkage is about 20% (in respect of dimension) and 44 % (in respect of volume). Morphological evaluation of the porous bodies showed that the samples contained macropores of 1-2 mm diameter and micropores of 1-2 μm diameter. The measurement of mechanical strength provided 1.31 ± 0.30 MPa. Subsequently, dense samples were prepared from the as-prepared powder. In this case, the powder was mixed with poly(vinyl alcohol) and distilled water to make a slurry. The mixture was mixed using Zirconia balls as the crusher for 2h. The suspension was then spray-dried, and well-dispersed powder was obtained. The powder was compressed uniaxially using cold pressing technique at 800 kglcm2 and the pellets obtained were sintered in air at : 250 o C for I h. The sintered dense bodies have apparent density of 2.855 g/cm 3 , with a 10% porosity. The flexural strength of the dense bodies measured on the specimens of riimension 2 mm x 2.5 mm gave rise to the considerable value of 57.7 MPa

[Medicinal preparations in Mattioli's herbarium of 1596].

Science.gov (United States)

Drabek, P

2008-06-01

Herbaria in the 16th century very often included also the information concerning the use of medicinal plants in practice. The second Czech edition of Mattioli's Herbarium presented about 4000 pieces of therapeutic advice and instructions, including nearly 200 complete prescriptions for medicinal preparations. Preparations for internal use were mainly potions and concoctions. In preparations for external administration, the dosage was not of great importance and therefore less attention was paid to their precise composition. At that period, distillation was still widely used to prepare medicaments.

Mapping QTL for fatty acid composition that segregates between the ...

African Journals Online (AJOL)

Mapping QTL for fatty acid composition that segregates between the Japanese Black and Limousin cattle breeds (Short communication). NOM Tshipuliso, LJ Alexander, TW Geary, VM Snelling, DC Rule, JE Koltes, BE Mote, MD MacNeil ...

Microfluidic Sample Preparation for Diagnostic Cytopathology

Science.gov (United States)

Mach, Albert J.; Adeyiga, Oladunni B.; Di Carlo, Dino

2014-01-01

The cellular components of body fluids are routinely analyzed to identify disease and treatment approaches. While significant focus has been placed on developing cell analysis technologies, tools to automate the preparation of cellular specimens have been more limited, especially for body fluids beyond blood. Preparation steps include separating, concentrating, and exposing cells to reagents. Sample preparation continues to be routinely performed off-chip by technicians, preventing cell-based point-of-care diagnostics, increasing the cost of tests, and reducing the consistency of the final analysis following multiple manually-performed steps. Here, we review the assortment of biofluids for which suspended cells are analyzed, along with their characteristics and diagnostic value. We present an overview of the conventional sample preparation processes for cytological diagnosis. We finally discuss the challenges and opportunities in developing microfluidic devices for the purpose of automating or miniaturizing these processes, with particular emphases on preparing large or small volume samples, working with samples of high cellularity, automating multi-step processes, and obtaining high purity subpopulations of cells. We hope to convey the importance of and help identify new research directions addressing the vast biological and clinical applications in preparing and analyzing the array of available biological fluids. Successfully addressing the challenges described in this review can lead to inexpensive systems to improve diagnostic accuracy while simultaneously reducing overall systemic healthcare costs. PMID:23380972

Preparation of bubble damage detectors

International Nuclear Information System (INIS)

Tu Caiqing; Guo Shilun; Wang Yulan; Hao Xiuhong; Chen Changmao; Su Jingling

1997-01-01

Bubble damage detectors have been prepared by using polyacrylamide as detector solid and freon as detector liquid. Tests show that the prepared detectors are sensitive to fast neutrons and have proportionality between bubble number and neutron fluence within a certain range of neutron fluence. Therefore, it can be used as a fast neutron detector and a dosimeter

Food Safety When Preparing Holiday Meals

Science.gov (United States)

... Public Health Current: Remember Food Safety when Preparing Holiday Meals Services and Programs Regulation & Licensure Vital Records ... food safety is especially important as they prepare holiday meals. Many holiday dinners include meat and poultry, ...

Remote Preparation of an Atomic Quantum Memory

International Nuclear Information System (INIS)

Rosenfeld, Wenjamin; Berner, Stefan; Volz, Juergen; Weber, Markus; Weinfurter, Harald

2007-01-01

Storage and distribution of quantum information are key elements of quantum information processing and future quantum communication networks. Here, using atom-photon entanglement as the main physical resource, we experimentally demonstrate the preparation of a distant atomic quantum memory. Applying a quantum teleportation protocol on a locally prepared state of a photonic qubit, we realized this so-called remote state preparation on a single, optically trapped 87 Rb atom. We evaluated the performance of this scheme by the full tomography of the prepared atomic state, reaching an average fidelity of 82%

Sol-gel preparation of uranium oxide spheres

International Nuclear Information System (INIS)

Dolezal, J.; Urbanek, V.

1978-01-01

Information is presented on problems of preparing nuclear fuel by the sol-gel method. Basic data on different process types are given. A more detailed description of the method of preparation of spherical particles of uranium oxide gel developed and used at the Nuclear Research Institute at Rez is given. Advantages and disadvantages of sol-gel materials are discussed in comparison with fuel materials prepared by classical precipitation methods. The feasibility of the sol-gel methods for preparing other materials is shortly mentioned and their application outlined. (author)

7 CFR 905.8 - Prepare for market.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Prepare for market. 905.8 Section 905.8 Agriculture... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.8 Prepare for market. Prepare for market means to wash, grade, size, or place fruit (whether or not wrapped) into any container whatsoever...

Uses of γ-radiation for preparing culture media

International Nuclear Information System (INIS)

Speranskaya, I.D.; Tumanyan, M.A.; Mironova, L.L.

1977-01-01

A technique has been developed for sterilizing the culture media by γ-radiation. For this purpose, dry preparations were exposed to doses of 3 to 6 Mrad and then dissolved in sterile distilled water. The quality of the preparations prepared in such a way is not inferior to that of the preparations sterilized by filtering. The advantage of the proposed technique is that it is possible to prepare liquid media quickly and to store dry sterile media for a long time at room temperature

Microbial viability in preparations packaged for single use.

Science.gov (United States)

Obayashi, Akiko; Oie, Shigeharu; Kamiya, Akira

2003-05-01

We evaluated microbial viability in preparations packaged for single use only which mandate that residual solution be discarded such as albumin and globulin preparations as blood products, preparations containing albumin (such as urokinase and interferon), fat emulsions, and a preparation containing fat emulsions (propofol). In most preparations, Serratia marcescens and Burkholderia cepacia proliferated rapidly at 30 degrees C. However, in globulin preparations containing 1-2.25% glycine to prevent protein degradation (Gamma-Venin P, Venilon-I, Globulin Injection, and Ahlbulin), no growth of S. marcescens and B. cepacia was detected over 24 h at 30 degrees C. For globulin preparations containing 1-2.25% glycine, the injunction to "Discard residual solution after the package has been used" in the package inserts can be revised to "It is possible to use residual solution within 24 h after the package has been used with storage in a cool place."

Patients with History of Colonoscopy Are Less Likely to Achieve High Quality Preparation After Implementing Split-Dose Bowel Preparation.

Science.gov (United States)

Madhoun, M F; Bitar, H; Parava, P; Bashir, M H; Zia, H

2017-01-01

Anecdotally, we observed that patients who had previous colonoscopies were less likely to follow newly implemented split-dose bowel preparation (SDBP) instructions. We investigated whether the indication for colonoscopy is an independent factor for achieving high quality bowel preparation among patients asked to follow SDBP. We performed a retrospective study of data from 1478 patients who received outpatient colonoscopies in 2014 (the year of SDBP implementation) at our Veterans Affairs Medical Center. We collected information related to demographics and factors known to affect bowel preparations. Reasons for colonoscopy were dichotomized into surveillance (previous colonoscopy) vs. non-surveillance (positive occult blood test or screening). Bowel preparation quality was scored using the Boston Bowel Preparation Scale (BBPS), and was categorized as either excellent vs. not excellent (BBPS≥7 vs. BBPSquality was excellent in 60% of colonoscopies and adequate in 84% of colonoscopies. Thirty-six percent (535) were surveillance colonoscopies. In multivariate logistic regression analysis, more patients in the non-surveillance group achieved excellent (OR 0.8 ; 95% CI [0.7-0.8], P <0.0001) and adequate (OR 0.8 ; 95% CI [0.7-0.9], P <0.006) bowel preparation than did patients in the surveillance group. Patients with a prior colonoscopy might not follow the split-dose bowel preparation instructions. Educational interventions emphasizing the benefits of SDBP in this group of patients may help ensure compliance and prevent the habitual use of day-before preparations. © Acta Gastro-Enterologica Belgica.

The MAFLA (Mississippi, Alabama, Florida) Study, Grain Size Analyses

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The MAFLA (Mississippi, Alabama, Florida) Study was funded by NOAA as part of the Outer Continental Shelf Program. Dr. L.J. Doyle produced grain size analyses in the...

Hyperparathyroidism

Science.gov (United States)

... LJ, de Kretser DM, et al, eds. Endocrinology: Adult and Pediatric . 7th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap 63. Thakker RV. The parathyroid glands, hypercalcemia and hypocalcemia. In: Goldman L, Schafer AI, eds. Goldman's Cecil ...

Parathyroid hyperplasia

Science.gov (United States)

... LJ, de Kretser DM, et al, eds. Endocrinology: Adult and Pediatric . 7th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap 63. Thakker R. The parathyroid glands, hypercalcemia and hypocalcemia. In: Goldman L, Schafer AI, eds. Goldman's Cecil ...

Parathyroid adenoma

Science.gov (United States)

... LJ, de Kretser DM, et al, eds. Endocrinology: Adult and Pediatric . 7th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap 63. Thakker RV. The parathyroid glands, hypercalcemia, and hypocalcemia. In: Goldman L, Schafer AI, eds. Goldman's Cecil ...

Osteitis fibrosa

Science.gov (United States)

... LJ, de Kretser DM, et al, eds. Endocrinology: Adult and Pediatric . 7th ed. Philadelphia, PA: Elsevier Saunders; 2016:chap 63. Thakker RV. The parathyroid glands, hypercalcemia and hypocalcemia. In: Goldman L, Schafer AI, eds. Goldman's Cecil ...

161---8 Dec 2009.indd [final version].indd

African Journals Online (AJOL)

2009-12-08

Dec 8, 2009 ... The theory is attractive to practical theologians for two reasons. ... They consider conforming to principles to be of more importance than cultivating harmony. ...... Francis, L.J. & Atkins, P., 2000, Exploring Luke's Gospel: A guide.

Preparation of naphtalene monocrystals for scintillometers

International Nuclear Information System (INIS)

Gaeta, R.

1959-01-01

A method to prepare naphthalene crystals for scintillometers is described. The different methods of preparation and the reasons to choose the Bridgman method are analysed. The thermal curves of the growing furnaces, blister shape, use of curved capillaries and the most convenient growing velocities are studied in detail. Methods of preparation of high purity naphthalene by means of chromatography and zone melting are described. Finally the operations of cutting and polishing of crystal and their most significant physics properties are studied. (Author) 28 refs

Proceedings. Feedstock preparation and quality 1997 workshop

Energy Technology Data Exchange (ETDEWEB)

Mattsson, Jan Erik [ed.

1998-06-01

The IEA Bioenergy Feedstock Preparation and Quality 1997 Workshop dealt with fuel feedstock quality improvement and methods to determine feedstock properties. It was arranged by the Swedish Univ. of Agricultural Sciences on behalf of the IEA Bioenergy Task XII Activity 4.1 Feedstock Preparation and Quality. This Activity is a 3-year cooperation 1995-1997 between Denmark, Sweden and the USA, mainly based on information exchange. The workshop had two sections: presentations by invited experts, and country reports on recent development in feedstock preparation and quality in the three participating countries. Separate abstracts have been prepared for four of the six papers presented

A Simple Preparation Method for Diphosphoimidazole

DEFF Research Database (Denmark)

Rosenberg, T.

1964-01-01

A simple method for the preparation of diphosphoimidazole is presented that involves direct phosphorylation of imidazole by phosphorus oxychloride in alkaline aqueous solution. Details are given on the use of diphosphoimidazole in preparing sodium phosphoramidate and certain phosphorylated amino...

Preparation and Optimization of Esomeprazole Nanosuspension ...

African Journals Online (AJOL)

Purpose: To prepare and optimize esomeprazole nanosuspension to enhance drug dissolution rate. Methods: Esomeprazole nanosuspensions were prepared by evaporative precipitation-ultrasonication method using F68 (Poloxamer 188) and F127 (Poloxamer 407) as stabilizers. Formulation and process variables ...

Effects of different algae in diet on growth and interleukin (IL-10 production of juvenile sea cucumber Apostichopus japonicus

Directory of Open Access Journals (Sweden)

Md Anisuzzaman

2017-10-01

Full Text Available Abstract The experiment was conducted to investigate the effects of different algae in diet on growth, survival, and interleukin-10 productions of sea cucumber. At first, a 9-week feeding trail was conducted to evaluate the growth performance and survival of the sea cucumber fed one of the six experimental diets containing ST (Sargassum thunbergii, UL (Ulva lactuca, UP (Undaria pinnatifida, LJ (Laminaria japonica, SS (Schizochytrium sp., and NO (Nannochloropsis oculata in a recirculating aquaculture system. The result showed that survival was not significantly different among the dietary treatments, and the specific growth rate (SGR of sea cucumber fed the UL diet (1.58% d−1 was significantly higher than that of sea cucumber fed the other diets (P < 0.05, except for the LJ and NO diets. Secondly, interleukin (IL-10 gene expression was determined where mice splenocytes were stimulated with 10 μg ml−1 of sea cucumber extracts for 2 h. The result showed that IL-10 gene expression levels were significantly increased in UL, LJ, and NO diets fed sea cucumber extracts compared to other experimental diets. The results suggest that dietary inclusion with Ulva lactuca, Laminaria japonica, and Nannochloropsis oculata algae may improve the growth of juvenile sea cucumber and could upregulate IL-10 gene expression in mice splenocytes. Such detailed information could be helpful in further development of more appropriate diets for sea cucumber culture.

Recent advances in FIB-TEM specimen preparation techniques

International Nuclear Information System (INIS)

Li Jian; Malis, T.; Dionne, S.

2006-01-01

Preparing high-quality transmission electron microscopy (TEM) specimens is of paramount importance in TEM studies. The development of the focused ion beam (FIB) microscope has greatly enhanced TEM specimen preparation capabilities. In recent years, various FIB-TEM foil preparation techniques have been developed. However, the currently available techniques fail to produce TEM specimens from fragile and ultra-fine specimens such as fine fibers. In this paper, the conventional FIB-TEM specimen preparation techniques are reviewed, and their advantages and shortcomings are compared. In addition, a new technique suitable to prepare TEM samples from ultra-fine specimens is demonstrated

Magistral preparation in nuclear medicine departments: Requirements for their realization; Preparations magistrales en radiopharmacie: contraintes liees a la mise en place

Energy Technology Data Exchange (ETDEWEB)

Desruet, M.D. [Radiopharmacie, clinique universitaire de medecine nucleaire, CHU de Grenoble, 38 - Grenoble (France); Bolot, C. [Radiopharmacie, hospices civils de Lyon, groupement hospitalier Est, 69 - Bron (France); Bourrel, F. [Services de pharmacie et medecine nucleaire, centre hospitalier d' Avignon, 84 - Avignon (France); Francois-Joubert, A.; Biechlin-Chassel, M.L. [Medecine nucleaire et Radiopharmacie, centre hospitalier de Chambery, 73 - Chambery (France); Couret, I. [Service de medecine nucleaire, hopital Lapeyronie, 34 - Montpellier (France); Pelegrin, M. [Institut de recherche en cancerologie (IRCM), 34 - Montpellier (France); Service de medecine nucleaire, hopital Purpan, 31 - Toulouse (France); Lao, S. [Service de medecine nucleaire, CHU Hopital de l' Archet, 06 - Nice (France); Ouhayon, E.; Sauvan, R. [Service de medecine nucleaire, institut Paoli-Calmettes, 13 - Marseille (France)

2010-11-15

Use of radiopharmaceuticals in French nuclear medicine departments depends on marketing authorization and their development may be compromised by a limited return on investment. As an alternative, radiopharmaceuticals may also be prepared in the form of a magistral preparation, like in some European countries. In this case, these preparations are subjected to restrictions and requirements for radio-pharmacies relating to quality assurance, facilities and equipment, quality of starting materials and final radiopharmaceutical products defined in French good preparation practice. Labelled tracers used as magistral preparations have to be prepared under the full responsibility of a radio-pharmacist and used under the responsibility of the prescribing physician. Conditions of sufficient guarantees for the safety of the patient and adherence to pharmaceutical rules must be evaluated individually. However, this form of preparation intends to supply specific medical needs for an individual patient and is not an answer in the framework of development of radiopharmaceuticals. (authors)

Three-Dimensional Propagation and Scattering Around a Conical Seamount

Science.gov (United States)

2007-06-01

s) Td . I or, 71 IT +~ f E [ai’D+l + 153j n 1JDJ+Iil (rj) r7 1 ql(Z)Xpij+l[, = ZL ,i2nH1., (,)+ 1, ,, )1 k --f , 1(z) Mll qjk)I,p4z)d1. (4.45) 102...F,t )-I (DH-ljC,,,+’. flj + Ihj ,Cb+’DfIIlj ) f + (Fj) -’ (DIlh,,C a+ lj 7’+1 -, !/,.-fI/’jiC+1lDjJ I) b-’,,+ REJ+ 1 anj+ 1 + Jl R3r, ’ 1,(4|.55...80 , li ,c൓ 400 400 ; :l 200 I/10 0 0 200 -400 -400 -00fO d00 50 50 (a) Td Los, dg) C-SNAP J 0 7 - os s (M), C-SNAP Jx 33 12012 600 110 600 110 400

Freezing and melting line invariants of the Lennard-Jones system

DEFF Research Database (Denmark)

Costigliola, Lorenzo; Schrøder, Thomas; Dyre, Jeppe C.

2016-01-01

The invariance of several structural and dynamical properties of the Lennard-Jones (LJ) system along the freezing and melting lines is interpreted in terms of isomorph theory. First the freezing/melting lines of the LJ system are shown to be approximated by isomorphs. Then we show...... that the invariants observed along the freezing and melting isomorphs are also observed on other isomorphs in the liquid and crystalline phases. The structure is probed by the radial distribution function and the structure factor and dynamics are probed by the mean-square displacement, the intermediate scattering...... function, and the shear viscosity. Studying these properties with reference to isomorph theory explains why the known single-phase melting criteria hold, e.g., the Hansen–Verlet and the Lindemann criteria, and why the Andrade equation for the viscosity at freezing applies, e.g., for most liquid metals. Our...

Phase behavior of the 38-atom Lennard-Jones cluster

International Nuclear Information System (INIS)

Sehgal, Ray M.; Maroudas, Dimitrios; Ford, David M.

2014-01-01

We have developed a coarse-grained description of the phase behavior of the isolated 38-atom Lennard-Jones cluster (LJ 38 ). The model captures both the solid-solid polymorphic transitions at low temperatures and the complex cluster breakup and melting transitions at higher temperatures. For this coarse model development, we employ the manifold learning technique of diffusion mapping. The outcome of the diffusion mapping analysis over a broad temperature range indicates that two order parameters are sufficient to describe the cluster's phase behavior; we have chosen two such appropriate order parameters that are metrics of condensation and overall crystallinity. In this well-justified coarse-variable space, we calculate the cluster's free energy landscape (FEL) as a function of temperature, employing Monte Carlo umbrella sampling. These FELs are used to quantify the phase behavior and onsets of phase transitions of the LJ 38 cluster

The Hathaway Scholarship and Academic Preparation: A Study of Perceptions of Academic Preparation and Academic Success

Science.gov (United States)

Aagard, Tammy Lindsay

2010-01-01

With the implementation of the Hathaway scholarship in the state of Wyoming, questions arose regarding the effectiveness of a prescribed set of high school courses (the Success Curriculum) in preparing students for success in college. This research sought to determine the perceptions of academic preparation of students who earned the Hathaway…

Sample preparation in foodomic analyses.

Science.gov (United States)

Martinović, Tamara; Šrajer Gajdošik, Martina; Josić, Djuro

2018-04-16

Representative sampling and adequate sample preparation are key factors for successful performance of further steps in foodomic analyses, as well as for correct data interpretation. Incorrect sampling and improper sample preparation can be sources of severe bias in foodomic analyses. It is well known that both wrong sampling and sample treatment cannot be corrected anymore. These, in the past frequently neglected facts, are now taken into consideration, and the progress in sampling and sample preparation in foodomics is reviewed here. We report the use of highly sophisticated instruments for both high-performance and high-throughput analyses, as well as miniaturization and the use of laboratory robotics in metabolomics, proteomics, peptidomics and genomics. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Preparation of Spirocyclic β-Proline Esters

DEFF Research Database (Denmark)

Fjelbye, Kasper; Marigo, Mauro; Clausen, Rasmus Prætorius

2017-01-01

A series of novel N-Bn-protected spirocyclic β-proline esters were prepared using [3+2] cycloaddition and subsequently converted into their corresponding aldehydes. In addition, two novel N-Cbz-protected spirocyclic β-proline esters were prepared using intramolecular cyclization starting from...

Oromucosal film preparations: classification and characterization methods.

Science.gov (United States)

Preis, Maren; Woertz, Christina; Kleinebudde, Peter; Breitkreutz, Jörg

2013-09-01

Recently, the regulatory authorities have enlarged the variety of 'oromucosal preparations' by buccal films and orodispersible films. Various film preparations have entered the market and pharmacopoeias. Due to the novelty of the official monographs, no standardized characterization methods and quality specifications are included. This review reports the methods of choice to characterize oromucosal film preparations with respect to biorelevant characterization and quality control. Commonly used dissolution tests for other dosage forms are not transferable for films in all cases. Alternatives and guidance on decision, which methods are favorable for film preparations are discussed. Furthermore, issues about requirements for film dosage forms are reflected. Oromucosal film preparations offer a wide spectrum of opportunities. There are a lot of suggestions in the literature on how to control the quality of these innovative products, but no standardized tests are available. Regulatory authorities need to define the standards and quality requirements more precisely.

5 Ways to Prepare for Your Sports Season

Science.gov (United States)

... English Español 5 Ways to Prepare for Your Sports Season KidsHealth / For Teens / 5 Ways to Prepare ... temporada deportiva 5 Ways to Prepare for Your Sports Season If you've ever played competitive sports, ...

Water SA - Vol 35, No 3 (2009)

African Journals Online (AJOL)

concentration of a municipal solid waste leachate · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. JJ Schoeman, LJ Strachan. http://dx.doi.org/10.4314/wsa.v35i3.76776 ...

Psychotropic Medication Use among Adolescents: United States, 2005-2010

Science.gov (United States)

... no. 12–3929. 2010. Pratt LA, Brody DJ. Depression in the United States household population, 2005–2006. NCHS data brief, no 7. Hyattsville, MD: National Center for Health Statistics. 2008. Akinbami LJ, Liu X, Pastor PN, Reuben ...

evaluation of nutritional status among school-aged children in rural

African Journals Online (AJOL)

Administrator

This study examines anthropometric indices of school-age children in five .... was measured to the nearest 0.1 cm using standard medical techniques with a tape ..... Bundy DA, Drake LJ and C Burbano School food, politics and child health.

Blood Pressure: Does It Have a Daily Pattern?

Science.gov (United States)

... and night. With Sheldon G. Sheps, M.D. Kaplan NM. Ambulatory blood pressure monitoring and white coat ... www.uptodate.com/home. Accessed Feb. 12, 2015. Kaplan NM, et al. Kaplan's Clinical Hypertension. 10th ed. ...

On Preparing for Squadron Command

Science.gov (United States)

1988-04-01

Gortler, Majur Gordon D. "Management Development---Could the Air Force Be Doing More?" Resear,;h Study, Air Command and Staff College. 1 07:3. 20...ABSTRACT (Continue on reverse If necessary and identify by block number) -This study addresses the broad issue of preparing Air Force officers for...are obsolete. SECURITY CLASSIFICATION OF THIS PAGE UNCLASSIFIED - - PREFACE This study addresses the broad Issue of preparing Air Force officers to

CT colonography with limited bowel preparation: prospective assessment of patient experience and preference in comparison to optical colonoscopy with cathartic bowel preparation

International Nuclear Information System (INIS)

Jensch, Sebastiaan; Bipat, Shandra; Vries, Ayso H. de; Heutinck, Anneke; Stoker, Jaap; Peringa, Jan; Montauban van Swijndregt, Alexander D.; Dekker, Evelien; Baak, Lubbertus C.

2010-01-01

The purpose of this study was to prospectively compare participant experience and preference of limited preparation computed tomography colonography (CTC) with full-preparation colonoscopy in a consecutive series of patients at increased risk of colorectal cancer. CTC preparation comprised 180 ml diatrizoate meglumine, 80 ml barium and 30 mg bisacodyl. For the colonoscopy preparation 4 l of polyethylene glycol solution was used. Participants' experience and preference were compared using the Wilcoxon signed rank test and the chi-squared test, respectively. Associations between preference and experience parameters for the 173 participants were determined by logistic regression. Diarrhoea occurred in 94% of participants during CTC preparation. This side effect was perceived as severely or extremely burdensome by 29%. Nonetheless, the total burden was significantly lower for the CTC preparation than for colonoscopy (9% rated the CTC preparation as severely or extremely burdensome compared with 59% for colonoscopy; p<0.001). Participants experienced significantly more pain, discomfort and total burden with the colonoscopy procedure than with CTC (p<0.001). After 5 weeks, 69% preferred CTC, 8% were indifferent and 23% preferred colonoscopy (p<0.001). A burdensome colonoscopy preparation and pain at colonoscopy were associated with CTC preference (p<0.04). In conclusion, participants' experience and preference were rated in favour of CTC with limited bowel preparation compared with full-preparation colonoscopy. (orig.)

The Third International Reference Preparation of Egg Lecithin

Science.gov (United States)

Krag, P.; Bentzon, M. Weis

1961-01-01

The Third International Reference Preparation of Egg Lecithin was produced (in a quantity of 5000 ml) at the WHO Serological Reference Centre, Copenhagen, and assayed in 1958 against the Second International Reference Preparation by four laboratories in three countries. Complement-fixation and slide-flocculation tests were used. The new preparation was found acceptable, and its establishment was authorized by the WHO Expert Committee on Biological Standardization. The average log10 titres and results of analyses of variances are shown. The variances were of the usual order of magnitude, and the differences in titre between antigens containing the Second and the Third International Reference Preparations varied from -0.011 to 0.116; only one of the differences exceeded the 5% limit of significance. The use of the Third International Reference Preparation in tests for the acceptability of lecithin preparations is described. PMID:13753864

Cytomegalovirus neutralization by hyperimmune and standard intravenous immunoglobulin preparations.

Science.gov (United States)

Planitzer, Christina B; Saemann, Marcus D; Gajek, Hartwig; Farcet, Maria R; Kreil, Thomas R

2011-08-15

Cytomegalovirus (CMV) remains one of the most important pathogens after transplantation, potentially leading to CMV disease, allograft dysfunction, acute, and chronic rejection and opportunistic infections. Immunoglobulin G (IgG) preparations with high antibody titers against CMV are a valuable adjunctive prevention and treatment option for clinicians and apart from standard intravenous immunoglobulin (IVIG), CMV hyperimmune preparations are available. The CMV antibody titer of these preparations is typically determined by Enzyme-linked immunosorbent assay (ELISA), also used for the selection of high titer plasma donors for the production of the CMV Hyperimmune product. However, CMV ELISA titers do not necessarily correlate with CMV antibody function which is determined by virus neutralization tests. CMV antibody titers were determined by both ELISA and virus neutralization assay and the IgG subclass distribution was compared between a CMV hyperimmune licensed in Europe and standard IVIG preparations. Although the expected high CMV IgG ELISA antibody titers were confirmed for three lots of a CMV hyperimmune preparation, the functionally more relevant CMV neutralizing antibody titers were significantly higher for 31 lots of standard IVIG preparations. Moreover, considerably lower IgG3 levels were found for the CMV hyperimmune preparation compared with standard IVIG preparations. The higher functional CMV neutralization titers of standard IVIG preparations and the better availability of these preparations, suggest that these products could be a valuable alternative to the CMV hyperimmune preparation.

Alcohol skin preparation causes surgical fires.

Science.gov (United States)

Rocos, B; Donaldson, L J

2012-03-01

Surgical fires are a rare but serious preventable safety risk in modern hospitals. Data from the US show that up to 650 surgical fires occur each year, with up to 5% causing death or serious harm. This study used the National Reporting and Learning Service (NRLS) database at the National Patient Safety Agency to explore whether spirit-based surgical skin preparation fluid contributes to the cause of surgical fires. The NRLS database was interrogated for all incidents of surgical fires reported between 1 March 2004 and 1 March 2011. Each report was scrutinised manually to discover the cause of the fire. Thirteen surgical fires were reported during the study period. Of these, 11 were found to be directly related to spirit-based surgical skin preparation or preparation soaked swabs and drapes. Despite manufacturer's instructions and warnings, surgical fires continue to occur. Guidance published in the UK and US states that spirit-based skin preparation solutions should continue to be used but sets out some precautions. It may be that fire risk should be included in pre-surgical World Health Organization checklists or in the surgical training curriculum. Surgical staff should be aware of the risk that spirit-based skin preparation fluids pose and should take action to minimise the chance of fire occurring.

A synthetic interpretation: the double-preparation theory

International Nuclear Information System (INIS)

Gondran, Michel; Gondran, Alexandre

2014-01-01

In the 1927 Solvay conference, three apparently irreconcilable interpretations of the quantum mechanics wave function were presented: the pilot-wave interpretation by de Broglie, the soliton wave interpretation by Schrödinger and the Born statistical rule by Born and Heisenberg. In this paper, we demonstrate the complementarity of these interpretations corresponding to quantum systems that are prepared differently and we deduce a synthetic interpretation: the double-preparation theory. We first introduce in quantum mechanics the concept of semi-classical statistically prepared particles, and we show that in the Schrödinger equation these particles converge, when h→0, to the equations of a statistical set of classical particles. These classical particles are undiscerned, and if we assume continuity between classical mechanics and quantum mechanics, we conclude the necessity of the de Broglie–Bohm interpretation for the semi-classical statistically prepared particles (statistical wave). We then introduce in quantum mechanics the concept of a semi-classical deterministically prepared particle, and we show that in the Schrödinger equation this particle converges, when h→0, to the equations of a single classical particle. This classical particle is discerned and assuming continuity between classical mechanics and quantum mechanics, we conclude the necessity of the Schrödinger interpretation for the semi-classical deterministically prepared particle (the soliton wave). Finally we propose, in the semi-classical approximation, a new interpretation of quantum mechanics, the ‘theory of the double preparation’, which depends on the preparation of the particles. (paper)

Methods of preparation of Swazi traditional fermented foods

Directory of Open Access Journals (Sweden)

Protus Simatende

2015-09-01

Conclusion: Umcombotsi, emahewu, buganu, and emasi were the fermented foods commonly prepared at a household level in the Hhohho region, Swaziland. The main ingredient used for preparing umcombotsi and emahewu was maize meal. Unmilled sorghum malt was also added during preparation of umcombotsi. However, typically no malt was added during the preparation of emahewu. Buganu and emasi also play an important role in the diet and socioeconomic activities of the population in Swaziland.

Technique for preparation of anaerobic microbes: Rodshaped cellulolytic bacteria

Directory of Open Access Journals (Sweden)

Amlius Thalib

2001-10-01

Full Text Available Preparation of anaerobic-rod cellulolytic bacteria with coating technique has been conducted. Steps of the processes involved were cultivation, coating, evaporation, and drying. Coating agent used was Gum Arabic, and drying techniquesconducted were freeze drying and sun drying. pH of culture media was firstly optimized to obtain the maximal population ofbacteria. Both coated and uncoated preparates were subjected to drying. Morphological and Gram type identifications showed that uncoated preparate dried with freeze drying is not contaminated (ie. all bacteria are rod shape with Gram-negative type while the one dried with sun drying is not morphologically pure (ie. containing of both rod and coccus shapes with Gram negative and positive. The coated preparates dried by both freeze and sun drying, were not contaminated (ie. all are rods with Gram-negative. The coating and drying processes decreased viability of preparates significantly. However, the decreasing of viability of coated preparate are lower than uncoated preparate (ie. 89 vs. 97%. Total count of bacteria in sun-drying coated preparate are higher (P<0.05 than the uncoated preparate (ie. 3.38 x 1010 vs. 1.97 x 1010 colony/g DM. Activity of sun-drying coated preparate to digest elephant grass and rice straw was higher (P<0.01 than the sun-drying uncoated preparate with the in vitro DMD values were 42.7 vs. 35.5% for elephant grass substrate and 29.3 vs. 24.6% for rice straw substrate. Therefore, it is concluded that coating technique has a positive effects on the preparation of rumen bacteria.

Sample preparation guidelines for two-dimensional electrophoresis.

Science.gov (United States)

Posch, Anton

2014-12-01

Sample preparation is one of the key technologies for successful two-dimensional electrophoresis (2DE). Due to the great diversity of protein sample types and sources, no single sample preparation method works with all proteins; for any sample the optimum procedure must be determined empirically. This review is meant to provide a broad overview of the most important principles in sample preparation in order to avoid a multitude of possible pitfalls. Sample preparation protocols from the expert in the field were screened and evaluated. On the basis of these protocols and my own comprehensive practical experience important guidelines are given in this review. The presented guidelines will facilitate straightforward protocol development for researchers new to gel-based proteomics. In addition the available choices are rationalized in order to successfully prepare a protein sample for 2DE separations. The strategies described here are not limited to 2DE and can also be applied to other protein separation techniques.

21 CFR 864.4400 - Enzyme preparations.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Enzyme preparations. 864.4400 Section 864.4400 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4400 Enzyme...

Monitoring radiolabelled antacid preparations in the stomach

International Nuclear Information System (INIS)

May, H.A.; Wilson, C.G.; Hardy, J.G.

1984-01-01

Radiolabelled antacid preparations have been monitored in the stomach using gamma scintigraphy. The stomach contents were labelled with technetium-99m and two antacid preparations with indium-113m. It has been shown that the antacid containing aluminium hydroxide and magnesium oxide mixed and emptied with the other stomach contents. An alginate containing preparation tended to float on the food and emptied only slowly from the stomach. (Auth.)

[Support and tools for preparing for birth].

Science.gov (United States)

Bouychou, Mathilde; Sallez, Hélène; de Brito, Gina; Mouilti, Yamina; Piquée, Nathalie; Boyé, Hélène

There are a thousand and one ways of preparing to be a parent. Specific support is offered to pregnant women or the couple in order to take the time to prepare for this personal transformation. Haptonomy, sophrology, shiatsu and massage, acupuncture or gestalt therapy are some of the methods helping parents to prepare to welcome their future child with peace of mind. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Evaluation and optimisation of preparative semi-automated electrophoresis systems for Illumina library preparation.

Science.gov (United States)

Quail, Michael A; Gu, Yong; Swerdlow, Harold; Mayho, Matthew

2012-12-01

Size selection can be a critical step in preparation of next-generation sequencing libraries. Traditional methods employing gel electrophoresis lack reproducibility, are labour intensive, do not scale well and employ hazardous interchelating dyes. In a high-throughput setting, solid-phase reversible immobilisation beads are commonly used for size-selection, but result in quite a broad fragment size range. We have evaluated and optimised the use of two semi-automated preparative DNA electrophoresis systems, the Caliper Labchip XT and the Sage Science Pippin Prep, for size selection of Illumina sequencing libraries. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preparation and evaluation of reference materials for accountancy analysis. (1) Preparation and evaluation method

International Nuclear Information System (INIS)

Takamatsu, Mai; Kacchi, Tomokazu; Murakami, Toshiki; Ai, Hironobu; Sumi, Mika; Abe, Katsuo; Kageyama, Tomio; Nakazawa, Hiroaki

2009-01-01

Isotope dilution mass spectrometry method used for the accountancy analysis at nuclear fuel facilities requires the standard materials called LSD (Large Size Dried) spike. Generally, LSD spikes are prepared from certified reference materials (CRMs) which supplied from foreign laboratories. However, the difficulty of Pu CRM importation is increasing. It is important for safeguards to attain and continue high reliable accountancy analysis and stable securing of LSD spike is essential. Therefore, in order to conserve CRMs, several types of LSD spike were prepared under collaboration work between JAEA and JNFL, such as the amount of nuclear material in one LSD spike is decreased and others. Practical test with actual samples were performed at JNFL Rokkasho reprocessing plant, and those results were compared with the results obtained by using LSD spike which supplied from foreign laboratory. Preparation and verification analysis of LSD spikes and evaluation of uncertainty based on ISO-GUM will be presented. (author)

How do medical students prepare for flipped classrooms?

NARCIS (Netherlands)

Bouwmeester, RAM; de Kleijn, R.A.M.; ten Cate, TJ; van Rijen, HVM; Westerveld, HE

A flipped classroom, an approach abandoning traditional lectures and having students come together to apply acquired knowledge, requires students to come to class well prepared. The nature of this preparation is currently being debated. Watching web lectures as a preparation has typically been

QTL Information Table: 499 [Q-TARO

Lifescience Database Archive (English)

Full Text Available 66 A RG476 RG214 pha Kamoshita, A., Zhang, J., Siopongco, J., Sarkarung, S., Nguyen, H.T., and Wade, L.J. (2002). Effects of Phenotyp...ing Environment on Identification of Quantitative Trait Loci for Rice Root Morpholo

A computer simulation investigation using model liquids

Indian Academy of Sciences (India)

L-J) and Stockmayer (SM) interactions have been carried out to explore the effects of the longer-ranged dipole-dipole interaction on solvent viscosity and diffusion. Switching on of the dipolar interaction at a fixed density and temperature has ...

Longitudinal Joint Repair Best Practices for the Ohio Department of Transportation

Science.gov (United States)

2017-07-01

The Ohio Department of Transportation (ODOT) has identified longitudinal joint (LJ) failure of existing hot-mix asphalt (HMA) paving as a systemic weakness in the structure of some asphalt surfaces. In the past, these joint failures were treated as i...

East African Medical Journal - Vol 90, No 11 (2013)

African Journals Online (AJOL)

Scrotal Reconstruction with a Pedicled Gracilis Muscle Flap after Debridement of Fournier's Gangrene: A Case Report · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. LJ Katusabe, D Balumuka, A Hodges, 375-378 ...

Cyclic joint remote state preparation in noisy environment

Science.gov (United States)

Zhang, Chang-yue; Bai, Ming-qiang; Zhou, Si-qi

2018-06-01

We propose a scheme of cyclic joint remote state preparation for three sides, which takes advantage of three GHZ states to compose product state as quantum channel. Suppose there are six legitimate participants, says Alice, Bob, Charlie, David, Emma and Fred in the scheme. It can be shown that Alice and David can remotely prepare a single-qubit state on Bob's side; meanwhile, Bob and Emma can remotely prepare a desired quantum state on Charlie's side, and Charlie and Fred can also remotely prepare a single-qubit state on Alice's side at the same time. Further, it can be achieved in the opposite direction of the cycle by changing the quantum channel. Based on it, we generalize this protocol to N (N≥3) sides utilizing three multi-qubit GHZ-type states as quantum channel. Therefore, the scheme can achieve cyclic joint remote state preparation, which remotely prepares N states in quantum network with N-party, simultaneously. In addition, we consider that the effect of amplitude-damping noise of the initial states is prepared in four different laboratory. Clearly, we use fidelity to describe how much information has been lost in the cyclic process. Our investigation about the effect of noise shows that the preparing of the initial state in different laboratories will affect the loss of information.

Synchrotron/crystal sample preparation

Science.gov (United States)

Johnson, R. Barry

1993-01-01

The Center for Applied Optics (CAO) of the University of Alabama in Huntsville (UAH) prepared this final report entitled 'Synchrotron/Crystal Sample Preparation' in completion of contract NAS8-38609, Delivery Order No. 53. Hughes Danbury Optical Systems (HDOS) is manufacturing the Advanced X-ray Astrophysics Facility (AXAF) mirrors. These thin-walled, grazing incidence, Wolter Type-1 mirrors, varying in diameter from 1.2 to 0.68 meters, must be ground and polished using state-of-the-art techniques in order to prevent undue stress due to damage or the presence of crystals and inclusions. The effect of crystals on the polishing and grinding process must also be understood. This involves coating special samples of Zerodur and measuring the reflectivity of the coatings in a synchrotron system. In order to gain the understanding needed on the effect of the Zerodur crystals by the grinding and polishing process, UAH prepared glass samples by cutting, grinding, etching, and polishing as required to meet specifications for witness bars for synchrotron measurements and for investigations of crystals embedded in Zerodur. UAH then characterized these samples for subsurface damage and surface roughness and figure.

30 CFR 827.12 - Coal preparation plants: Performance standards.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal preparation plants: Performance standards...-COAL PREPARATION PLANTS NOT LOCATED WITHIN THE PERMIT AREA OF A MINE § 827.12 Coal preparation plants..., modification, reclamation, and removal activities at coal preparation plants shall comply with the following...

What Is a Simple Liquid?

Directory of Open Access Journals (Sweden)

Trond S. Ingebrigtsen

2012-03-01

Full Text Available This paper is an attempt to identify the real essence of simplicity of liquids in John Locke’s understanding of the term. Simple liquids are traditionally defined as many-body systems of classical particles interacting via radially symmetric pair potentials. We suggest that a simple liquid should be defined instead by the property of having strong correlations between virial and potential-energy equilibrium fluctuations in the NVT ensemble. There is considerable overlap between the two definitions, but also some notable differences. For instance, in the new definition simplicity is not a direct property of the intermolecular potential because a liquid is usually only strongly correlating in part of its phase diagram. Moreover, not all simple liquids are atomic (i.e., with radially symmetric pair potentials and not all atomic liquids are simple. The main part of the paper motivates the new definition of liquid simplicity by presenting evidence that a liquid is strongly correlating if and only if its intermolecular interactions may be ignored beyond the first coordination shell (FCS. This is demonstrated by NVT simulations of the structure and dynamics of several atomic and three molecular model liquids with a shifted-forces cutoff placed at the first minimum of the radial distribution function. The liquids studied are inverse power-law systems (r^{-n} pair potentials with n=18,6,4, Lennard-Jones (LJ models (the standard LJ model, two generalized Kob-Andersen binary LJ mixtures, and the Wahnstrom binary LJ mixture, the Buckingham model, the Dzugutov model, the LJ Gaussian model, the Gaussian core model, the Hansen-McDonald molten salt model, the Lewis-Wahnstrom ortho-terphenyl model, the asymmetric dumbbell model, and the single-point charge water model. The final part of the paper summarizes properties of strongly correlating liquids, emphasizing that these are simpler than liquids in general. Simple liquids, as defined here, may be

Tritium incorporation in lipid preparations by catalytic methods

International Nuclear Information System (INIS)

Shevchenko, V.P.; Bezuglov, V.V.; Myasoedov, N.F.

1983-01-01

A series of polar and nonpolar lipids labelled with tritium, which are the most important components of biological membranes, has been prepared. Possible ways to increase the yield and molar radioactivity of biologically active preparations are considered. A supposition is made, that all the factors promoting dissociative adsorption of substrates during heterogeneous catalysis, should promote the increase in product yield of the initial structure and preparation of labelled preparations with molar radioactivity sufficient for carrying out the major part of biological studies

Implant Fixture Heat Transfer During Abutment Preparation.

Science.gov (United States)

Aleisa, Khalil; Alkeraidis, Abdullah; Al-Dwairi, Ziad Nawaf; Altahawi, Hamdi; Lynch, Edward

2015-06-01

The purpose of the study was to evaluate the effect of water flow rate on the heat transmission in implants during abutment preparation using a diamond bur in a high-speed dental turbine. Titanium-alloy abutments (n = 32) were connected to a titanium-alloy implant embedded in an acrylic resin within a water bath at a controlled temperature of 37°C. The specimens were equally distributed into 2 groups (16 each) according to the water flow rate used during the preparation phase. Group 1 had a water flow rate of 24 mL/min, and group 2 had a water flow rate of 40 mL/min. Each abutment was prepared in the axial plane for 1 minute and in the occlusal plane for 1 minute with a coarse tapered diamond bur using a high-speed dental handpiece. Thermocouples embedded at the cervix of the implant surface were used to record the temperature of heat transmission from the abutment preparation. Heat generation was measured at 3 distinct times (immediately and 30 seconds and 60 seconds after the end of preparation). Statistical analyses were carried out using 2-way analysis of variance and the Student t test. Water flow rates (24 mL vs 40 mL) and time interval had no statistically significant effect on the implant's temperature change during the abutment preparation stage (P = .431 and P = .064, respectively). Increasing the water flow rate from 24 to 40 mL/min had no influence on the temperature of the implant fixture recorded during preparation of the abutment.

Preparation of high-purity cerium nitrate

International Nuclear Information System (INIS)

Avila, Daniela Moraes; Silva Queiroz, Carlos Alberto da; Santos Mucillo, Eliana Navarro dos

1995-01-01

The preparation of high-purity cerium nitrate has been carried out Cerium oxide has been prepared by fractioned precipitation and ionic exchange techniques, using a concentrate with approximately 85% of cerium oxide from NUCLEMON as raw material. Five sequential ion-exchange columns with a retention capacity of 170 g each have been used. The ethylenediamine-tetraacetic acid (EDTA) was used as eluent. The cerium content has been determined by gravimetry and iodometry techniques. The resulting cerium oxide has a purity > 99%. This material was transformed in cerium nitrate to be used as precursor for the preparation of Zirconia-ceria ceramics by the coprecipitation technique. (author)

Preparation and evaluation of famotidine polymorphs.

Science.gov (United States)

Nagaraju, Ravouru; Prathusha, Ande Penchala; Subhash Chandra Bose, Penjury; Kaza, Rajesh; Bharathi, Koganti

2010-06-01

The main objective of this study was to compare the behaviour of drug release among the famotidine polymorphs prepared by using various additives and solvents, by solvent evaporation method. The famotidine polyvinyl pyrrolidone polymorphs with different concentrations (0.5, 1 and 1.5%) were prepared by using solvent evaporation method. In these polymorphs of different concentrations 1% w/v polymorphs showed better release. Similarly, famotidine polymorphs of Tween 80 with different concentrations, polyethylene glycol 1% w/v and methanol was prepared. Famotidine polymorphs prepared the PVP (1% w/v) showed better drug release and solubility. DSC, FTIR, SEM and XRD studies were carried out. DSC studies revealed that PVP polymorphs were found to stable compared to other polymorphs. FTIR studies of the polymorphs prepared indicated that there was an interaction found in all polymorphs except PVP polymorphs indicating the absence of drug-additive interaction. SEM studies of PVP and methanol polymorphs revealed that they are tabular and prismatic and columnar respectively. These changes in morphology were due to variations in face dimensions and also properties of additives and solvent used in the preparation. XRD studies revealed that there is an increase in crystallinity in methanol polymorphs when compared to PVP polymorphs and pure drug. The mechanism of drug release was determined using zero order, first order and Hixon-Crowel equations. From the drug release kinetics these polymorphs followed first order and Hixon-Crowel release kinetics, exhibited fair linearity in their dissolution data. Further, in vivo studies were carried out for the evaluation of antiulcer activity. Based upon the drug release pattern and its kinetics only two of the prepared polymorphs of famotidine i.e. famotidine PVP polymorphs and famotidine methanol polymorphs were selected for animal studies. Antiulcer studies were carried out using pylorus ligation model and estimation of antioxidant

Preparing Instructional Objectives: Agony or Ecstasy?

Science.gov (United States)

Roberts, Wesley K.

This paper 1) discusses the problems encountered in preparing objectives for instructional programs; 2) describes an informal research project in which seven instructional designers working on the same project attempted to determine agreement on an objective; and 3) suggests how to prepare objectives so that difficulties can be minimized. One…

7 CFR 160.89 - Medicinal preparations.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Medicinal preparations. 160.89 Section 160.89... STANDARDS FOR NAVAL STORES Sales and Shipments § 160.89 Medicinal preparations. A compound or mixture containing spirits of turpentine or rosin, or both, with other drugs, when sold for medicinal purposes, is...

Preparing Elementary Prospective Teachers to Teach Early Algebra

Science.gov (United States)

Hohensee, Charles

2017-01-01

Researchers have argued that integrating early algebra into elementary grades will better prepare students for algebra. However, currently little research exists to guide teacher preparation programs on how to prepare prospective elementary teachers to teach early algebra. This study examines the insights and challenges that prospective teachers…

Computer application in coal preparation industry in China

Energy Technology Data Exchange (ETDEWEB)

Lu, M.; Wu, L.; Ni, Q. (China Univ. of Mining and Technology, Xuzhou (China))

1990-01-01

This paper describes several packages of microcomputer programs developed for designing and managing the coal preparation plants. Three parts are included: Coal Cleaning Package (CCP), Coal Preparation Optimization Program (CPO) and Coal Preparation Computer Aided Design System (CPCAD). The function of CCP is: evaluating and predicting coal cleaning result. Coal presentation process modelling and optimization; coal preparation flowsheet design and optimization. The CPO is a nonlinear optimization program. It can simulate and optimize the profit for different flowsheet to get the best combination of the final products. The CPCAD was developed based upon AutoCAD and makes full use of AutoLISP, digitizer menus and AutoCAD commands, combining the functions provided by AutoCAD and the principle used in conventional coal preparation plant design, forming a designer-oriented CPCAD system. These packages have proved to be reliable, flexible and easy to learn and use. They are a powerful tool for coal preparation plant design and management. (orig.).

Application of artificial intelligence in coal preparation

Energy Technology Data Exchange (ETDEWEB)

Kuang, Y.; Deng, J.; Liu, H. [China University of Mining and Technology, Xuzhou (China). School of Chemical Engineering and Technology

2001-11-01

The general situation of using AI (Artificial intelligence) technology in coal preparation was introduced. The expert systems of coal preparation plant design, the expert management system of coal preparation plant, and the intelligent data-drawing bank were discussed. Some opinions about their foundation and method of knowledge expressing, inference, knowledge discovery of databases were presented. It is pointed out that an industrial system such as coal preparation is big and complex, so it is necessary and also difficult to use AI technology in these systems. Because the types of knowledge are different, there are various knowledge expressions and model of knowledge inference, hence only comprehensive methods suitable for the characters of the system may be used. 14 refs., 5 figs.

21 CFR 113.81 - Product preparation.

Science.gov (United States)

2010-04-01

...) Blanching by heat, when required in the preparation of food for canning, should be effected by heating the... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Product preparation. 113.81 Section 113.81 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

12 CFR 917.8 - Budget preparation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Budget preparation. 917.8 Section 917.8 Banks... POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.8 Budget preparation. (a) Adoption of budgets. Each Bank's board of directors shall be responsible for the adoption of an...

Preparing for the extension conference of 1995

International Nuclear Information System (INIS)

Sanders, B.

1993-01-01

This paper is intended to address the preparation process that must precede the conference to be held early in 1995 with intention to decide how long the Treaty on the Non-proliferation of Nuclear Weapons will be extended. The importance of preparation is pointed out. The time has come for every Government interested in the Treaty to take a new look at the issues that will play a role at the Conference and prepare the positions they will adopt

Esimese käigu kasulikkusest / Robert D. Kaplan

Index Scriptorium Estoniae

Kaplan, Robert D.

2008-01-01

Ilmunud ka: Postimees : na russkom jazõke 19. aug. 2008, lk. 11. Autor analüüsib USA ja lääneriikide võimalusi Venemaaga hakkamasaamisel pärast Venemaa sõjalist konflikti Gruusiaga ning leiab, et Venemaa esimese käigu eelis avaldus olukorras, kus geopoliitiline tegelikkus erineb tugevalt diplomaatilisest näilisusest

Preparation of kits for 99Tcm radiopharmaceuticals

International Nuclear Information System (INIS)

1992-05-01

This publication details preparation under Good Manufacturing Practices (GMP) of thirteen widely used 99 Tc m radiopharmaceuticals and their quality assurance practices. The objective of this document is to present to those who intend to launch a kit preparation programme a set of preparation procedures and other relevant information gathered during kit production over a period of more than a decade, to serve as a good starting point. The manuals and monographs included in the document are based on the experience gained in two major centres. The publication of this material is intended to give a typical example, and not the only possible procedure for preparing the kits. Following the essentials of these kit preparation procedures, it is always possible to make alterations to the composition of the kits. The kits described here concern widely used 99 Tc m radiopharmaceuticals which do not require a Single Photon Emission Computed Tomography (SPECT) camera. These examples of the ''first generation'' of kits are not very intricate to prepare. Although it is advisable to have only one agent for a given intended use, a few agents for each purpose, e.g. EHDP and MDP for bone imagining, have been included in the document so that the reader can have some flexibility in selecting a particular kit. 24 refs, 2 figs

Molecular genetic study of hemophilia B in an Algerian population

African Journals Online (AJOL)

DELL

2016-12-21

Dec 21, 2016 ... linked recessive bleeding disorder of coagulation caused by mutation in ... is in close correlation with the type and position of the mutation in FIX ..... Ana RJ, Claudia PB, Isaura AG, José de Jesús LJ, Hilda LZ, Johanna. MMC ...

[Pediatric preparations of blood products].

Science.gov (United States)

Boulat, C

2017-09-01

The transfusion in pediatrics may require specific preparations to adapt to the various characteristics from preterm neonates to big child: weight, immaturity, immune system, blood volume, long and short-term prognosis, and to meet the needs of pathologies related to the perinatal period. The knowledge of the process for preparation, conservation and administration of these particular products shall permit a transfusion in safe conditions by supporting the prescribers in a personalized blood management. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Overview of Site Preparation

International Nuclear Information System (INIS)

Garin, P.

2006-01-01

The preparation of Cadarache as the host of ITER is organised at a double level: Europe, since the beginning of the candidature in 2001, is coordinating the so-called European ITER Site Studies; France, as the host country, has put in place a dedicated structure at a decisional level (close to the government), and operational level in the PACA region with two entities: The Agency Iter France (AIF), inside the CEA, interlocutor of international and European entities, in charge of site preparation and fund recollection; An accompanying prefectoral mission, in charge mainly of road adaptation and the international school. The paper will cover all the aspects related to the preparation of the implementation of ITER: Technical aspects: the progress of site preparation itself, its servicing (water supply, electrical supply, Internet...), the road adaptation between the large harbour of Fos-sur-mer and Cadarache, etc. will be detailed. Regulatory procedures: in the framework of the delegation that the ITER partners gave to the CEA/AIF on 14 th September 2005, two main large files are in progress: The public debate, organised by an independent authority, informs the population of the challenges and impacts of ITER in Provence; The safety documents: the writing of the preliminary safety report, which will be submitted to the Nuclear Safety Authority and the files submitted to the public during the public enquiries are ongoing. Socioeconomic aspects: the welcome of ITER staff and their families is operational, via a dedicated Welcome Office; the location of an international school in Manosque leads now to its pre-figuration. The overall organisation will be described, as well as all planning forecast for the coming years, leading to the start of construction. (author)

Single-tube library preparation for degraded DNA

DEFF Research Database (Denmark)

Carøe, Christian; Gopalakrishnan, Shyam; Vinner, Lasse

2018-01-01

these obstacles and enable higher throughput are therefore of interest to researchers working with degraded DNA. 2.In this study, we compare four Illumina library preparation protocols, including two “single-tube” methods developed for this study with the explicit aim of improving data quality and reducing...... of chemically damaged and highly fragmented DNA molecules. In particular, the enzymatic reactions and DNA purification steps during library preparation can result in DNA template loss and sequencing biases, affecting downstream analyses. The development of library preparation methods that circumvent...... preparation time and expenses. The methods are tested on grey wolf (Canis lupus) museum specimens. 3.We found single-tube protocols increase library complexity, yield more reads that map uniquely to the reference genome, reduce processing time, and may decrease laboratory costs by 90%. 4.Given the advantages...

Use of bactec 460 TB system in the diagnosis of tuberculosis

Directory of Open Access Journals (Sweden)

Rodrigues C

2007-01-01

Full Text Available Purpose : To evaluate, the efficacy of BACTEC 460 TB system for the diagnosis of tuberculosis in a tertiary care hospital in Mumbai, India. Methods : We compared 12,726 clinical specimens using BACTEC 460 TB system and conventional method for detection of Mycobacterium tuberculosis over a period of six years. Result: The overall recovery rate was 39% by BACTEC technique and 29% using Lowenstein-Jensen (LJ medium. An average detection time for B actec0 460 TB system was found to be 13.3 days and 15.3 days as against 31.2 days and 35.3 days by LJ method for respiratory and nonrespiratory specimens respectively. The average reporting time for drug susceptibility results ranged from 6-10 days for the BACTEC 460 TB system. Conclusions: The BACTEC system is a good system for level II laboratories, especially in the diagnosis of extrapulmonary and smear negative tuberculosis.

Theoretical equation of state for classical fluids. I. Test by perturbation theory

International Nuclear Information System (INIS)

Gil-Villegas, A.; Chavez, M.; Del Rio, F.

1993-01-01

This paper shows how to construct the theoretical equation of state (TEOS) of a classical simple fluid. The theory relies on the mean collisional diameter and range, and maps the thermodynamical properties of the fluid into those of an equivalent square-well (ESW) fluid of appropriate depth ε , diameter σ and range R. It is shown that the ESW has the same pressure as the fluid of interest. Hence the THEOS of any simple fluid takes the form of a SW EOS of the given ε , σ and R. The theory is applied to a Lennard-Jones (LJ) system in a first-order perturbation. The mapping equation have a physical solution for densities where the SW EOS is accurate; the resulting LJ TEOS agrees very well with the results of computer simulations, and compares favorably with the recent TEOS developed by Song and Mason. (Author). 17 refs, 7 figs, 1 tab

Arctic Ice Dynamics Joint Experiment 1975-1976. Physical Oceanography Data Report, Salinity, Temperature and Depth Data, Camp Caribou. Volume I.

Science.gov (United States)

1980-02-01

0 wr NM 1 NNNN .VIDT00m 00~ V"!8% 00 WVm Mmp 08NN M8MM f"i M0 Ott " -n-nn ON & MM 84. 0’IM-0 Ic 5-0 0 . .8. . ....... .. o noemn l I.50n MM MM.f m.MN...0 .4-O"s- W oo P Sn .0o %.in-0 06"l 00l-o 0--P- s-fp.P ?o’ 0-0~- .. Me5U MM5i MW We M Pa- 0* PIM - .4 ൈM" IMts...8217 It T- Ott , Tq 5 :Tn.a- 0 a11-0 T .:C UW-0- C t LJ34 0 -M N MM ~ ~ lM 44 Irvf: 555. 55?? o0 02 :t!:: 4 ljWOWU"M, n HO I 1010. . X 000..4~Iin00.0. 50

Preparing for the SAT: A Review

Science.gov (United States)

Appelrouth, Jed I.; Zabrucky, Karen M.

2017-01-01

In 2016, more than 1.6 million students took the Scholastic Aptitude Test (SAT), a standardized college admissions test (College Board 2016a). Researchers have estimated that 33 percent of students who take the SAT participate in some mode of formal test preparation, such as private tutoring or classes, to prepare for the exam (Buchmann, Condron…

Preparing for retirement - new seminars

CERN Multimedia

Human Resources Department

2015-01-01

We would like to take the opportunity to inform you about a new programme related to retirement, organised by the Human Resources Department. Retirement marks the end of a career and the start of a new chapter in life.  In all cases, being well-informed and prepared is necessary to cope successfully with this transition. The programme has been developed for staff members and consists of two seminars: Leaving CERN (half day seminar): short presentations by internal speakers, focusing on what options CERN offers at the end of your career: organised once per year, next session scheduled on 24 November 2015, in the afternoon, enrolment and more information on Indico.   Preparation for retirement (2-day seminar): interactive workshop (in small groups) delivered by external experts, focusing on how to prepare psychologically as well as practically to cope with all the changes retirement brings: organised regularly in 2016, in English or ...

Capillarity-based preparation system for optical colorimetric sensor arrays.

Science.gov (United States)

Luo, Xiao-Gang; Yi, Xin; Bu, Xiang-Nan; Hou, Chang-Jun; Huo, Dan-Qun; Yang, Mei; Fa, Huan-Bao; Lei, Jin-Can

2017-03-01

In recent years, optical colorimetric sensor arrays have demonstrated beneficial features, including rapid response, high selectivity, and high specificity; as a result, it has been extensively applied in food inspection and chemical studies, among other fields. There are instruments in the current market available for the preparation of an optical colorimetric sensor array, but it lacks the corresponding research of the preparation mechanism. Therefore, in connection with the main features of this kind of sensor array such as consistency, based on the preparation method of contact spotting, combined with a capillary fluid model, Washburn equation, Laplace equation, etc., this paper develops a diffusion model of an optical colorimetric sensor array during its preparation and sets up an optical colorimetric sensor array preparation system based on this diffusion model. Finally, this paper compares and evaluates the sensor arrays prepared by the system and prepared manually in three aspects such as the quality of array point, response of array, and response result, and the results show that the performance index of the sensor array prepared by a system under this diffusion model is better than that of the sensor array of manual spotting, which meets the needs of the experiment.

Evaporation of Lennard-Jones fluids.

Science.gov (United States)

Cheng, Shengfeng; Lechman, Jeremy B; Plimpton, Steven J; Grest, Gary S

2011-06-14

Evaporation and condensation at a liquid/vapor interface are ubiquitous interphase mass and energy transfer phenomena that are still not well understood. We have carried out large scale molecular dynamics simulations of Lennard-Jones (LJ) fluids composed of monomers, dimers, or trimers to investigate these processes with molecular detail. For LJ monomers in contact with a vacuum, the evaporation rate is found to be very high with significant evaporative cooling and an accompanying density gradient in the liquid domain near the liquid/vapor interface. Increasing the chain length to just dimers significantly reduces the evaporation rate. We confirm that mechanical equilibrium plays a key role in determining the evaporation rate and the density and temperature profiles across the liquid/vapor interface. The velocity distributions of evaporated molecules and the evaporation and condensation coefficients are measured and compared to the predictions of an existing model based on kinetic theory of gases. Our results indicate that for both monatomic and polyatomic molecules, the evaporation and condensation coefficients are equal when systems are not far from equilibrium and smaller than one, and decrease with increasing temperature. For the same reduced temperature T/T(c), where T(c) is the critical temperature, these two coefficients are higher for LJ dimers and trimers than for monomers, in contrast to the traditional viewpoint that they are close to unity for monatomic molecules and decrease for polyatomic molecules. Furthermore, data for the two coefficients collapse onto a master curve when plotted against a translational length ratio between the liquid and vapor phase.

Deposition-precipitation with Urea to prepare Au/Mg(OH)2 catalysts: Influence of the preparation conditions on metal size and load

International Nuclear Information System (INIS)

Milone, Candida; Trapani, Mariachiara; Zanella, Rodolfo; Piperopolulos, Elpida; Galvagno, Signorino

2010-01-01

Deposition-precipitation with Urea method to prepare Au/Mg(OH) 2 was investigated. The preparation was carried out at 80 o C using an aqueous solution of HAuCl 4 and Urea in presence of MgO as support precursor. The pH of the solution was 9.5-10 owing to the rapid hydration of MgO to Mg(OH) 2 . The influence of the preparation conditions (Urea concentration, preparation procedure, addition of magnesium citrate) on the gold load and particle size distribution was evaluated. The structural characterization of preparations was carried out by means of X-ray diffractometry and transmission electron microscopy. Among the parameters investigated, the preparation procedure, that is the control of the interaction between gold species and the support, is the main step for the deposition of the highest amount of gold (> 80% of the theoretical amount) having small size and a narrow distribution (d = 4.1 nm, σ = ±1.1 nm). The synthesized catalysts were tested in the CO oxidation reaction.

FFTF operations procedures preparation guide. Revision 2

International Nuclear Information System (INIS)

1976-12-01

The Guide is intended to provide guidelines for the initial preparation of FFTF Operating Procedures. The Procedures Preparation Guide was developed from the plan presented and approved in the FFTF Reactor Plant Procedures Plan, PC-1, Revision 3

Preparation of zirconium molybdate gel generator

International Nuclear Information System (INIS)

Charoen, S.; Aungurarat, G.; Laohawilai, S.; Sukontpradit, W.; Jingjit, S.

1994-01-01

A procedure for preparation of 99mTc generator based on conversion to zirconium molybdate gel of 99Mo produced by neutron activation was reported. The gel was prepared from zirconium oxychloride solution pH 1.6, ammonium molybdate solution pH 3-5 and mole ratio of Zr:Mo 1:1 which had water content about 7-8%. Small generators containing 1-1.5 g of gel were eluted with average efficiencies of 77% and the activity peak in the first 3 ml of 10 ml of saline solution. The amount of Mo and Zr in eluates were below the acceptance limit. The gel generators of activity about 100 mCi were prepared and had the good performance in elutability and stability

Progress involving new techniques for liposome preparation

Directory of Open Access Journals (Sweden)

Zhenjun Huang

2014-08-01

Full Text Available The article presents a review of new techniques being used for the preparation of liposomes. A total of 28 publications were examined. In addition to the theories, characteristics and problems associated with traditional methods, the advantages and drawbacks of the latest techniques were reviewed. In the light of developments in many relevant areas, a variety of new techniques are being used for liposome preparation and each of these new technique has particular advantages over conventional preparation methods. However, there are still some problems associated with these new techniques that could hinder their applications and further improvements are needed. Generally speaking, due to the introduction of these latest techniques, liposome preparation is now an improved procedure. These applications promote not only advances in liposome research but also the methods for their production on an industrial scale.

Study on fluorouracil–chitosan nanoparticle preparation and its antitumor effect

Directory of Open Access Journals (Sweden)

Gaimin Chen

2016-05-01

Full Text Available To successfully prepare fluorouracil–chitosan nanoparticles, and further analyze its anti-tumor activity mechanism, this paper makes a comprehensive study of existing preparation prescription and makes a detailed analysis of fluorouracil–chitosan in vitro release and pharmacodynamic behavior of animals. Two-step synthesis method is adopted to prepare 5-FU–CS–mPEG prodrugs, and infrared, 1H NMR and differential thermal analysis are adopted to analyze characterization synthetic products of prepared drugs. To ensure clinical efficacy of prepared drugs, UV spectrophotometry is adopted for determination of drug loading capacity of prepared drugs, transmission electron microscopy is adopted to observe the appearance, dynamic dialysis method is used to observe in vitro drug release of prepared drugs and fitting of various release models is done. Anti-tumor effect is studied via level of animal pharmacodynamics. After the end of the experiment, tumor inhibition rate, spleen index and thymus index of drugs are calculated. Experimental results show that the prepared drugs are qualified in terms of regular shape, dispersion, drug content, etc. Animal pharmacodynamics experiments have shown that concentration level of drug loading capacity of prepared drugs has a direct impact on anti-tumor rate. The higher the concentration, the higher the anti-tumor rate. Results of pathological tissue sections of mice show that the prepared drugs cause varying degrees of damage to receptor cells, resulting in cell necrosis or apoptosis problem. It can thus be concluded that ion gel method is an effective method to prepare drug-loading nanoparticles, with prepared nanoparticles evenly distributed in regular shape which demonstrate good slow-release characteristics in receptor vitro and vivo. At the same time, after completion of drug preparation, relatively strong anti-tumor activity can be generated for the receptor, so this mode of preparation enjoys broad

Studies on the Preparation of Magnetic Photocatalysts

International Nuclear Information System (INIS)

Watson, S.; Scott, J.; Beydoun, D.; Amal, R.

2005-01-01

A crystalline titanium dioxide coating was deposited onto silica insulated magnetite particles to prepare a stable magnetic photocatalyst. The direct deposition of crystalline titanium dioxide was conducted by aging dispersions of insulated magnetite particles in a titanium sol-gel precursor mixture at 60-90 deg. C. The coating process was found to be influenced by pH, alkoxide precursor concentration, aging time and reaction temperature. A mechanism for the formation of the titanium dioxide coating has been proposed. The photocatalytic performance of the prepared particles was found to be related to the preparation conditions

Preparation and characteristics of CNT-metal composites

CSIR Research Space (South Africa)

Pityana, SL

2006-01-01

Full Text Available The success in keeping carbon nanotubes (CNT) bonded to stainless steel provides a possible method for the preparation of CNT-metal composites. Alternative methods for the preparation of CNT-metal composites include hot pressing, sintering, etc...

Advances in preparation and characterization of chitosan nanoparticles for therapeutics.

Science.gov (United States)

Chandra Hembram, Krushna; Prabha, Shashi; Chandra, Ramesh; Ahmed, Bahar; Nimesh, Surendra

2016-01-01

Polymers have been largely explored for the preparation of nanoparticles due to ease of preparation and modification, large gene/drug loading capacity, and biocompatibility. Various methods have been adapted for the preparation and characterization of chitosan nanoparticles. Focus on the different methods of preparation and characterization of chitosan nanoparticles. Detailed literature survey has been done for the studies reporting various methods of preparation and characterization of chitosan nanoparticles. Published database suggests of several methods which have been developed for the preparation and characterization of chitosan nanoparticles as per the application.

Preparation of thin vyns films

International Nuclear Information System (INIS)

Blanc, R.; Chedin, P.; Gizon, A.

1965-01-01

The fabrication of thin films of VYNS resin (copolymer of chloride and vinyl acetate) of superficial density from 3 to 50 μg/cm 2 with solutions in cyclohexanone is presented. Study and discussion of some properties compared with formvar film (polyvinyl formals). It appears that both can be used as source supports but formvar films are prepared more easily and more quickly, in addition they withstand higher temperatures. The main quality of VYNS is that they can be easily separated even several days after their preparation [fr

Preparation and characterization of water-absorbing composite ...

African Journals Online (AJOL)

The present work introduces a novel method for the formation of water absorbing composite membrane. The prepared composite is based on chitosan, carboxymethyl cellulose (CMC), and Montmorillonite. Prepared composite membrane exhibits high water absorbing and holding capacity with increasing clay content.

Carbon-Nickel oxide nanocomposites: Preparation and charecterisation

CSIR Research Space (South Africa)

Tile, N

2011-07-01

Full Text Available Nanocomposite materials have wide range of applications in solar energy conversion. In this work, C-NiO nanocomposite coatings are prepared using sol-gel synthesis and deposited on aluminium substrates using a spin coater. The coatings are prepared...

76 FR 82268 - Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for...

Science.gov (United States)

2011-12-30

... documents other than rules #0;or proposed rules that are applicable to the public. Notices of hearings #0... November 30, 2012. Period to be reviewed Antidumping Duty Proceedings BRAZIL: Polyethylene Terephthalate... International Co., Ltd. Shanghai LJ International Trading Co., Ltd. Shanghai Medicines & Health Products Import...

Center for Integration of Medicine and Innovative Technology

Science.gov (United States)

2007-11-01

tissue biopsy, cryotherapy , brachytherapy, and energy delivery. For the most part, however, image guidance requires expensive intra- operative...Weinand C, Peretti GM, Adams SB Jr, Bonassar LJ, Randolph MA, Gill TJ. An Allogenic Cell- Based Implant for Meniscal Lesions. Am J Sports Med. 2006

ASSESSMENT OF IN VITRO ANDROGENIC ACTIVITY IN KRAFT MILL EFFLUENT

Science.gov (United States)

Detection of In Vitro Androgenic Activity in Feedlot Effluent. Lambright, CS 1 , Guillette, LJ, Jr.2, Gray, LE, Jr.1 , 1USEPA, NHEERL, RTP, NC, 2 University of Florida, Dept. of Zoology, Gainesville FLRecent studies have shown the presence of androgenic activity in water...

117 - 122 Omoniyi et al

African Journals Online (AJOL)

User

The level of total-Cr ions was determined in the serum, red blood cell, plasma and fur of ... mammals by maintaining efficient glucose, lipid, and protein metabolism ..... Steven, J.D., Davies, L.J, Stanley, E.K, Abbott, R.A.,. Ihnat, M., Bidstrup, L., ...

Adaptive Redox Response of Mesenchymal Stromal Cells to Stimulation with Lipopolysaccharide Inflammagen: Mechanisms of Remodeling of Tissue Barriers in Sepsis

Science.gov (United States)

2013-03-08

conditions. It is well accepted that numerous vitagenes are evolutionarily adapted by cells to manage oxidative stress; they include but are not...hormetic phytochemicals and vitagenes in aging and longevity. Biochim Biophys Acta. 2012; 1822(5):753-83. [36] Martin LJ. Biology of mitochondria

Phytochemical screening, cytotoxicity and acute toxicity of Annona ...

African Journals Online (AJOL)

. 2001: 1-13. 18. Almeida RN, Falcão ACGM, Diniz RST, Quintans-Júnior. LJ, Polari RN, Barbosa-Filho JM, Agra MF, Duarte JC,. Ferreira CD, Antoniolli AR, Araújo CC. Metodologia para avaliação de plantas com atividade no sistema nervoso.

South African Medical Journal - Vol 99, No 9 (2009)

African Journals Online (AJOL)

Potential for medical error: Incorrectly completed request forms for thyroid function tests limit pathologists' advice to clinicians · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. AE Zemlin, L Nutt, LJ Burgess, F Eiman, RT Erasmus ...

Prefilled syringes for intravitreal injection reduce preparation time

DEFF Research Database (Denmark)

Subhi, Yousif; Kjer, Birgit; Munch, Inger Christine

2016-01-01

INTRODUCTION: The demand for intravitreal therapy has increased dramatically with the introduction of vascular endo-thelial growth factor inhibitors. Improved utilisation of existing resources is crucial to meeting the increased future demand. We investigated time spent preparing intravitreal inj...... had no influence on the design of the study, analysis of the data, preparation of the manuscript or the decision to publish. TRIAL REGISTRATION: not relevant.......INTRODUCTION: The demand for intravitreal therapy has increased dramatically with the introduction of vascular endo-thelial growth factor inhibitors. Improved utilisation of existing resources is crucial to meeting the increased future demand. We investigated time spent preparing intravitreal...... injection treatment using either prefilled syringes or vials in routine clinical practice. METHODS: We video-recorded preparations of intravitreal injections (n = 172) for each preparation type (ranibizumab prefilled syringe (n = 56), ranibizumab vial (n = 56) and aflibercept vial (n = 60)) in a multi...

PREPARE: guidelines for planning animal research and testing.

Science.gov (United States)

Smith, Adrian J; Clutton, R Eddie; Lilley, Elliot; Hansen, Kristine E Aa; Brattelid, Trond

2018-04-01

There is widespread concern about the quality, reproducibility and translatability of studies involving research animals. Although there are a number of reporting guidelines available, there is very little overarching guidance on how to plan animal experiments, despite the fact that this is the logical place to start ensuring quality. In this paper we present the PREPARE guidelines: Planning Research and Experimental Procedures on Animals: Recommendations for Excellence. PREPARE covers the three broad areas which determine the quality of the preparation for animal studies: formulation, dialogue between scientists and the animal facility, and quality control of the various components in the study. Some topics overlap and the PREPARE checklist should be adapted to suit specific needs, for example in field research. Advice on use of the checklist is available on the Norecopa website, with links to guidelines for animal research and testing, at https://norecopa.no/PREPARE .

Remote state preparation of spatial qubits

Energy Technology Data Exchange (ETDEWEB)

Solis-Prosser, M. A.; Neves, L. [Center for Optics and Photonics, Universidad de Concepcion, Casilla 4016, Concepcion (Chile) and Departamento de Fisica, Universidad de Concepcion, Casilla 160-C, Concepcion (Chile)

2011-07-15

We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity, and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

Remote state preparation of spatial qubits

International Nuclear Information System (INIS)

Solis-Prosser, M. A.; Neves, L.

2011-01-01

We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity, and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

IELTS Preparation Courses in China : the Reading Comprehension Task

OpenAIRE

Zhou, Ying

2011-01-01

More and more private language schools provide IELTS preparation courses for candidates who want to sit the test for admission to undergraduate and postgraduate courses in English-speaking countries. This essay investigates whether the IELTS preparation course in a language school in China offers an adequate preparation for candidates. The study focuses on one preparation course for the IELTS reading test (other modules are beyond the scope of the present study). A questionnaire and interview...

Preparation of CH4 for 14C measurements

International Nuclear Information System (INIS)

Cechova, A.; Grgula, M.; Povinec, P.; Sivo, A.

1988-01-01

An improved method of methane preparation from wood samples is described. It consists of the preparation of α-cellulose to secure a complete removal of contamination from the wood, its combustion to the form of CO 2 and the preparation of CH 4 in a new designed hydrogenation converter. Purified methane is suitable as a gas filling of the proportional counter. (author). 1 fig., 16 ref

Emergency situations in SMEs : Are entrepreneurs prepared?

NARCIS (Netherlands)

Kleijn, E.; Montfort, van K.; Masurel, E.

2012-01-01

The article examines how entrepreneurs prepare for emergency situations in small and medium-sized enterprises (SMEs) in the Netherlands. It identifies the characteristics of SMEs and the theory related to emergency situations and the preparations for such situations. It also provides a detailed

Preparation and characterization of water-absorbing composite ...

African Journals Online (AJOL)

ABCO

2012-08-16

Aug 16, 2012 ... The present work introduces a novel method for the formation of water absorbing composite membrane. The prepared composite is based on chitosan, carboxymethyl cellulose (CMC), and. Montmorillonite. Prepared composite membrane exhibits high water absorbing and holding capacity with increasing ...

Beyond Bombs, Bullets and Planes: Developing Airmen-Statements for the 21st Century

Science.gov (United States)

2009-12-11

Kaplan. Kaplan believes that “scarcity, crime, overpopulation , tribalism, and disease are rapidly destroying the social fabric of our planet.” Kaplan...challenges.” The report then called for the DoD to “foster a level of understanding and cultural intelligence about the Middle East and Asia

Antioxidant potential of selected Spirulina platensis preparations.

Science.gov (United States)

Dartsch, Peter C

2008-05-01

Recent studies suggest that Spirulina, a unicellular blue-green alga, may have a variety of health benefits and therapeutic properties and is also capable of acting as an antioxidant and antiinflammatory agent. In this study, a cell-free and a cell-based test assay were used to examine the antioxidant and antiinflammatory properties of four selected Spirulina platensis preparations: (1) Biospirulina, (2) SpiruComplex, a preparation with naturally bound selenium, chromium and zinc, (3) SpiruZink, a preparation with naturally bound zinc, (4) Zinkspirulina + Acerola, a preparation with naturally bound zinc and acerola powder. The cell-free test assay used potassium superoxide as a donor for superoxide radicals, whereas the cell-based test assay used the formation of intracellular superoxide radicals of functional neutrophils upon stimulation by phorbol-12-myristate-13-acetate as a model to investigate the potential of Spirulina preparations to inactivate superoxide radicals. In accordance with the recommended daily dosage, test concentrations ranging from 50 to 1000 microg/mL were chosen. The results showed a dose-dependent inactivation of free superoxide radicals (antioxidant effect) as well as an antiinflammatory effect characterized by a dose-dependent reduction of the metabolic activity of functional neutrophils and a dose-dependent inactivation of superoxide radicals generated during an oxidative burst. The results demonstrate that the tested Spirulina preparations have a high antioxidant and antiinflammatory potential. Especially SpiruZink and Zinkspirulina + Acerola might be useful as a supportive therapeutic approach for reducing oxidative stress and/or the generation of oxygen radicals in the course of inflammatory processes.

PREPARATION FOR RETIREMENT - AVS SEMINAR

CERN Multimedia

Social Service

2001-01-01

The 500 or so participants in the fifth Preparation for Retirement seminar held at the end of March were unfortunately deprived of the planned session on the AVS due to the unavailability of the Director of the Caisse Cantonale Genevoise de Compensation (CCGC). We have since had formal confirmation that because of an extra workload due to important changes in the Swiss tax and social legislation and the implementation this summer of the maternity insurance in Geneva, the CCGC has suspended its participation in preparation for retirement seminars in the international organisations for the time being. Conscious of the necessity of offering a session dedicated to the AVS, it is with pleasure that we can inform you that one of our legal advisers, Mr Lorenz Stampfli, has accepted to lead this session. In order to allow for adequate preparation we have reserved the following date: Wednesday 26 September from 14.00 to 16.00 in the Main Amphitheatre The session will be open to all people already registered and any o...

Ionic liquid-facilitated preparation of lignocellulosic composites

Science.gov (United States)

Lignocellulosic composites (LCs) were prepared by partially dissolving cotton along with steam exploded Aspen wood and burlap fabric reinforcements utilizing an ionic liquid (IL) solvent. Two methods of preparation were employed. In the first method, a controlled amount of IL was added to preassembl...

Preparation of bromine fluoride

International Nuclear Information System (INIS)

Domange, Pr; Duflo, J.

1958-05-01

This note addresses the preparation of bromine fluoride. It indicates the implemented process for the reaction, used products (fluorine and bromine), and column characteristics. It describes the operating mode. Apparatus drawing is provided

Sol-gel applications for ceramic membrane preparation

Science.gov (United States)

Erdem, I.

2017-02-01

Ceramic membranes possessing superior properties compared to polymeric membranes are more durable under severe working conditions and therefore their service life is longer. The ceramic membranes are composed of some layers. The support is the layer composed of coarser ceramic structure and responsible for mechanical durability under filtration pressure and it is prepared by consolidation of ceramic powders. The top layer is composed of a finer ceramic micro-structure mainly responsible for the separation of components present in the fluid to be filtered and sol-gel method is a versatile tool to prepare such a tailor-made ceramic filtration structure with finer pores. Depending on the type of filtration (e.g. micro-filtration, ultra-filtration, nano-filtration) aiming separation of components with different sizes, sols with different particulate sizes should be prepared and consolidated with varying precursors and preparation conditions. The coating of sol on the support layer and heat treatment application to have a stable ceramic micro-structure are also important steps determining the final properties of the top layer. Sol-gel method with various controllable parameters (e.g. precursor type, sol formation kinetics, heat treatment conditions) is a practical tool for the preparation of top layers of ceramic composite membranes with desired physicochemical properties.

Protein-Based Nanoparticle Preparation via Nanoprecipitation Method

Directory of Open Access Journals (Sweden)

Mohamad Tarhini

2018-03-01

Full Text Available Nanoparticles are nowadays largely investigated in the field of drug delivery. Among nanoparticles, protein-based particles are of paramount importance since they are natural, biodegradable, biocompatible, and nontoxic. There are several methods to prepare proteins containing nanoparticles, but only a few studies have been dedicated to the preparation of protein- based nanoparticles. Then, the aim of this work was to report on the preparation of bovine serum albumin (BSA-based nanoparticles using a well-defined nanoprecipitation process. Special attention has been dedicated to a systematic study in order to understand separately the effect of each operating parameter of the method (such as protein concentration, solvent/non-solvent volume ratio, non-solvent injection rate, ionic strength of the buffer solution, pH, and cross-linking on the colloidal properties of the obtained nanoparticles. In addition, the mixing processes (batch or drop-wise were also investigated. Using a well-defined formulation, submicron protein-based nanoparticles have been obtained. All prepared particles have been characterized in terms of size, size distribution, morphology, and electrokinetic properties. In addition, the stability of nanoparticles was investigated using Ultraviolet (UV scan and electrophoresis, and the optimal conditions for preparing BSA nanoparticles by the nanoprecipitation method were concluded.

30 CFR 827.13 - Coal preparation plants: Interim performance standards.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal preparation plants: Interim performance...-COAL PREPARATION PLANTS NOT LOCATED WITHIN THE PERMIT AREA OF A MINE § 827.13 Coal preparation plants: Interim performance standards. (a) Persons operating or who have operated coal preparation plants after...

45 CFR 1388.5 - Program criteria-preparation of personnel.

Science.gov (United States)

2010-10-01

..., DEVELOPMENTAL DISABILITIES PROGRAM THE UNIVERSITY AFFILIATED PROGRAMS § 1388.5 Program criteria—preparation of personnel. (a) Introduction to preparation of personnel: UAP interdisciplinary training programs reflect... 45 Public Welfare 4 2010-10-01 2010-10-01 false Program criteria-preparation of personnel. 1388.5...

Medical preparation container comprising microwave powered sensor assembly

DEFF Research Database (Denmark)

2016-01-01

The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave ...... oven. The microwave powered sensor assembly is configured for harvesting energy from microwave radiation emitted by the microwave oven and energize the sensor by the harvested microwave energy.......The present invention relates to a medical preparation container which comprises a microwave powered sensor assembly. The microwave powered sensor assembly comprises a sensor configured to measure a physical property or chemical property of a medical preparation during its heating in a microwave...

Quantitative sample preparation of some heavy elements

International Nuclear Information System (INIS)

Jaffey, A.H.

1977-01-01

A discussion is given of some techniques that have been useful in quantitatively preparing and analyzing samples used in the half-life determinations of some plutonium and uranium isotopes. Application of these methods to the preparation of uranium and plutonium samples used in neutron experiments is discussed

Preparation and characterisation of chitosan from Penicillium ...

African Journals Online (AJOL)

This work investigated the removal efficiency of Congo red dye (CRD) from aqueous solution using chitosan prepared from the biomass of Penicillium chrysogenum Thom. CRD is a benzidine - based anionic diazo dye known to be carcinogenic at low concentration. Chitosan was prepared from the mycelium of P.

Preoperative antiseptic skin preparations and reducing SSI.

Science.gov (United States)

Al Maqbali, Mohammed Abdullah

Surgical site infection (SSI) can affect the quality of care and increase the morbidity and mortality rate in after-surgical procedure. The use of an antiseptic skin preparation agent before the procedure can reduce the pathogens in the skin surface around the incision. Indicating the type of skin antiseptic preparation could prevent the infection and contamination of the wound. The most commonly used types of skin preparations are chlorhexidine and povidone iodine. However, the antiseptic solutions of both agents are strengthened with alcohol to prevent postoperative wound infection. The aim of this paper is to identify the best antiseptic agent in terms of skin preparation by evaluating the evidence in the literature. The factors associated with choosing the antiseptic skin agent, such as patients' allergies, skin condition and environmental risk, are also taken into account. This review suggests that cholorhexdine with alcohol may be the most effective in terms of reducing SSI.

Thermochemical evaluation and preparation of cesium uranates

International Nuclear Information System (INIS)

Takano, Masahide; Minato, Kazuo; Fukuda, Kousaku; Sato, Seichi; Ohashi, Hiroshi.

1997-03-01

Two kinds of cesium uranates, Cs 2 UO 4 and Cs 2 U 2 O 7 , which are predicted by thermochemical estimation to be formed in irradiated oxide fuels, were prepared from U 3 O 8 and Cs 2 CO 3 for measurements of the thermal expansions and thermal conductivities. In advance of the preparation, thermochemical calculations for the formation and decomposition of these cesium uranates were performed by Gibbs free energy minimizer. The preparation temperatures for Cs 2 UO 4 and Cs 2 U 2 O 7 were determined from the results of the thermochemical calculations. The prepared samples were analyzed by X-ray diffraction, which showed that the single phases of Cs 2 UO 4 and Cs 2 U 2 O 7 were formed. Thermogravimetry and differential thermal analysis were also performed on these samples, and the decomposition temperatures were evaluated. The experimental results were in good agreement with those of the thermochemical calculations. (author)

Preparation and Characterization of Graphene

Directory of Open Access Journals (Sweden)

Xu Man

2015-01-01

Full Text Available The homogeneous-dispersed graphene oxide was prepared by the improved Hummers method, which would be reduced to graphene with the reducing agent called hydrazine hydrate. The X-ray diffraction, Infrared spectroscopy, Raman spectra and Transmission electron microscopy were used to analysis the phase, morphology and structure of the graphene and graphene oxide. The results show that the graphene oxide and reduced graphene oxide prepared via this method, whose degree of oxidation and reduction are high; Also obtained a higher well-disperses and less structural imperfection of the graphene that was manufactured in the reducing system that added ammonia reduction

Global Journal of Educational Research - Vol 10, No 2 (2011)

African Journals Online (AJOL)

Adult and non-formal education as a veritable tool for attaining millennium development goal 1: Eradication of extreme poverty and hunger in Nigeria · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. SI Akpama, LJ Asor, CM Erim, 85-91 ...

Multiple testing issues in discriminating compound-related peaks and chromatograms from high frequency noise, spikes and solvent-based nois in LC-MS data sets

NARCIS (Netherlands)

Nyangoma, S.O.; Van Kampen, A.A.; Reijmers, T.H.; Govorukhina, N.I; van der Zee, A.G.; Billingham, I.J; Bischoff, Rainer; Jansen, R.C.

2007-01-01

Multiple testing issues in discriminating compound-related peaks and chromatograms from high frequency noise, spikes and solvent-based noise in LC-MS data sets.Nyangoma SO, van Kampen AA, Reijmers TH, Govorukhina NI, van der Zee AG, Billingham LJ, Bischoff R, Jansen RC. University of Birmingham.

Anti-bacterial activity of Extract of Crinum jagus bulb against Isolates ...

African Journals Online (AJOL)

Crinum jagus plant has been reportedly used for treatment of infectious diseases in Nigeria. In this study, the antibacterial activity of the crude extract and chromatographic fractions from the bulb of Crinium jagus against Mycobacterium tuberculosis isolates was investigated using Lowenstein-Jensen medium (LJ) and ...

Disinfection of Vegetative Cells of Bacillus anthracis

Science.gov (United States)

2016-03-01

Peterson, A.; Donlan, R.M.; Arduino , M.J. Chlorine Inactivation of Bacterial Select Agents. Appl. and Environ. Microbial. 2005, 71, 5669–5689...Rose, L.J.; Rice, E.W.; Hodges, L.; Peterson, A.; Arduino , M.J. 2007. Monochloramine Inactivation of Bacterial Select Agents. Appl. and Environ

SYNTHESIS AND CHARACTERISATION OF Ni0.25Co0.75Fe2O4 ...

African Journals Online (AJOL)

characterised for their size and structure using X-ray diffraction (XRD), high .... the sample shows broad peaks, indicating the fine crystalline nature of the particles. ... Zhao, L.J.; Zhang, H.J.; Xing,Y.; Song, S.Y.; Yu, S.Y.; Shi, W.D.; Guo, X.M.; ...

77 FR 58147 - Certain Electronic Fireplaces, Components Thereof, Manuals for Same, Certain Processes for...

Science.gov (United States)

2012-09-19

... determination (``ID'') (Order No. 20) of the presiding administrative law judge (``LJ'') finding the remaining... Order No. 19 denying respondents' motion for summary determination that complainants' breach of contract..., breach of contract, and tortious inference with contract, the threat or effect of which is to destroy or...

South African Medical Journal - Vol 104, No 11 (2014)

African Journals Online (AJOL)

Duchenne muscular dystrophy: High-resolution melting curve analysis as an affordable diagnostic mutation scanning tool in a South African cohort · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. AI Esterhuizen, JM Wilmshurst, RG Goliath, LJ Greenberg, 779-784.

FERMILAB: Preparing to collide

International Nuclear Information System (INIS)

Anon.

1992-01-01

Against the background of stringent Environment, Safety and Health (ES&H) regulations mandated by the US Department of Energy for all national Labs, Fermilab prepared to mount the next major Tevatron proton-antiproton collider run

Bowel preparations for colonoscopy: an RCT.

Science.gov (United States)

Di Nardo, Giovanni; Aloi, Marina; Cucchiara, Salvatore; Spada, Cristiano; Hassan, Cesare; Civitelli, Fortunata; Nuti, Federica; Ziparo, Chiara; Pession, Andrea; Lima, Mario; La Torre, Giuseppe; Oliva, Salvatore

2014-08-01

The ideal preparation regimen for pediatric colonoscopy remains elusive, and available preparations continue to represent a challenge for children. The aim of this study was to compare the efficacy, safety, tolerability, and acceptance of 4 methods of bowel cleansing before colonoscopy in children. This randomized, investigator-blinded, noninferiority trial enrolled all children aged 2 to 18 years undergoing elective colonoscopy in a referral center for pediatric gastroenterology. Patients were randomly assigned to receive polyethylene glycol (PEG) 4000 with simethicon (PEG-ELS group) or PEG-4000 with citrates and simethicone plus bisacodyl (PEG-CS+Bisacodyl group), or PEG 3350 with ascorbic acid (PEG-Asc group), or sodium picosulfate plus magnesium oxide and citric acid (NaPico+MgCit group). Bowel cleansing was evaluated according to the Boston Bowel Preparation Scale. The primary end point was overall colon cleansing. Tolerability, acceptability, and compliance were also evaluated. Two hundred ninety-nine patients were randomly allocated to the 4 groups. In the per-protocol analysis, PEG-CS+Bisacodyl, PEG-Asc, and NaPico+MgCit were noninferior to PEG-ELS in bowel-cleansing efficacy of both the whole colon (P = .910) and colonic segments. No serious adverse events occurred in any group. Rates of tolerability, acceptability, and compliance were significantly higher in the NaPico+MgCit group. Low-volume PEG preparations (PEG-CS+Bisacodyl, PEG-Asc) and NaPico+MgCit are noninferior to PEG-ELS in children, representing an attractive alternative to high-volume regimens in clinical practice. Because of the higher tolerability and acceptability profile, NaPico+MgCit would appear as the most suitable regimen for bowel preparation in children. Copyright © 2014 by the American Academy of Pediatrics.

Recent advances in applications of nanomaterials for sample preparation.

Science.gov (United States)

Xu, Linnan; Qi, Xiaoyue; Li, Xianjiang; Bai, Yu; Liu, Huwei

2016-01-01

Sample preparation is a key step for qualitative and quantitative analysis of trace analytes in complicated matrix. Along with the rapid development of nanotechnology in material science, numerous nanomaterials have been developed with particularly useful applications in analytical chemistry. Benefitting from their high specific areas, increased surface activities, and unprecedented physical/chemical properties, the potentials of nanomaterials for rapid and efficient sample preparation have been exploited extensively. In this review, recent progress of novel nanomaterials applied in sample preparation has been summarized and discussed. Both nanoparticles and nanoporous materials are evaluated for their unusual performance in sample preparation. Various compositions and functionalizations extended the applications of nanomaterials in sample preparations, and distinct size and shape selectivity was generated from the diversified pore structures of nanoporous materials. Such great variety make nanomaterials a kind of versatile tools in sample preparation for almost all categories of analytes. Copyright © 2015 Elsevier B.V. All rights reserved.

Cooperative Robot Teams Applied to the Site Preparation Task

International Nuclear Information System (INIS)

Parker, LE

2001-01-01

Prior to human missions to Mars, infrastructures on Mars that support human survival must be prepared. robotic teams can assist in these advance preparations in a number of ways. This paper addresses one of these advance robotic team tasks--the site preparation task--by proposing a control structure that allows robot teams to cooperatively solve this aspect of infrastructure preparation. A key question in this context is determining how robots should make decisions on which aspect of the site preparation t6ask to address throughout the mission, especially while operating in rough terrains. This paper describes a control approach to solving this problem that is based upon the ALLIANCE architecture, combined with performance-based rough terrain navigation that addresses path planning and control of mobile robots in rough terrain environments. They present the site preparation task and the proposed cooperative control approach, followed by some of the results of the initial testing of various aspects of the system

Collection and preparation of samples for gamma spectrometry

International Nuclear Information System (INIS)

Pan Jingquan

1994-01-01

The paper presents the basic principles of sample collection and preparation: setting up unified sampling program, methods and procedures, sample packing, transportation and storage, determination of sample quantity, sample pretreatment and preparation of samples to be analysed, etc. for gamma spectrometry. And the paper also describes briefly the main methods and special issues of sampling and preparation for the same environmental and biological samples, such as, air, water, grass, soil and foods

40 CFR 86.1231-90 - Vehicle preparation.

Science.gov (United States)

2010-07-01

... Emission Test Procedures for New Gasoline-Fueled, Natural Gas-Fueled, Liquefied Petroleum Gas-Fueled and Methanol-Fueled Heavy-Duty Vehicles § 86.1231-90 Vehicle preparation. (a) Prepare the fuel tank(s) for... tank is 40 percent full. (b) Provide additional fittings and adapters, as required, to accommodate a...

29 CFR 780.911 - Preparation for transportation.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Preparation for transportation. 780.911 Section 780.911... Employment in Fruit and Vegetable Harvest Transportation; Exemption From Overtime Pay Requirements Under Section 13(b)(16) Exempt Operations on Fruits Or Vegetables § 780.911 Preparation for transportation. The...

Preparation of carbon-14-labelled gallic acid

International Nuclear Information System (INIS)

Kozak, I.; Prochazka, M.

1977-01-01

Gallic acid labelled with 14 C was prepared for the needs of biological studies. A lithium derivative of trimethoxybenzene was treated with 14 CO 2 and then demethylated to yeld [carboxyl- 14 C]gallic acid. The preparation scheme and the individual steps of the synthesis are described in detail

30 CFR 75.1316 - Preparation before blasting.

Science.gov (United States)

2010-07-01

... two working faces are approaching each other, cutting, drilling and blasting shall be done at only one... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Preparation before blasting. 75.1316 Section 75... HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Explosives and Blasting § 75.1316 Preparation...

Um siðferðis- og skapgerðarmenntun: á óformlegt nám erindi inn í skóla?

OpenAIRE

Pálsdóttir, Kolbrún Þ.

2017-01-01

Þessi grein varpar ljósi á siðferðis- og skapgerðarmenntun innan skóla og stöðu slíkrar menntunar á Íslandi. Margt bendir til þess að þó að fræðimenn hafi á síðustu árum varpað ljósi á mikilvægi þess að efla siðferðilega dómgreind nemenda, sem og félags- og tilfinningaþroska þeirra, verði sá þáttur skólastarfsins iðulega útundan. Innleiðingu á lífsleikni sem námsgrein í grunn- og framhaldsskóla má skoða sem einn þátt í þeirri viðleitni að efla siðferðismenntun og heildstæða sýn...

Tuberculous synovitis of the knee in a 65-year-old man

Directory of Open Access Journals (Sweden)

Ciobanu Laura D.

2009-01-01

Full Text Available Introduction. Tuberculous (TB synovitis is a rare, treatable, potentially lethal form of extrapulmonary TB resulting from massive lymphohematogenous dissemination of Mycobacterium tuberculosis (M. tuberculosis. We presented a case of TB synovitis of the knee in a Caucasian HIV negative man from Romania, a high TB incidence country. Case report. A 65-year old man presented with cough, high fever, mild wheezing, and swelling of the left knee. Chest radiography was normal. Sputum smears were Acid Fast Bacilli negative and Löwenstein-Jensen (L-J culture negative for M. tuberculosis. Tuberculin skin test was negative. Respiratory symptoms disappeared in a week under antibiotics. Positive L-J cultures of knee punctation and favourable treatment outcome following standardized antituberculous treatment regimen confirmed the diagnosis of specific synovitis, which was also demonstrated by Magnetic Resonance Imaging (MRI. Conclusion. Tuberculous synovitis is important differencial diagnosis in patients with arthropathies and risk factors for TB in all the countries and all patients' ages even when tuberculin skin test is negative.

Influence of Solvent-Solvent and Solute-Solvent Interaction Properties on Solvent-Mediated Potential

International Nuclear Information System (INIS)

Zhou Shiqi

2005-01-01

A recently proposed universal calculational recipe for solvent-mediated potential is applied to calculate excess potential of mean force between two large Lennard-Jones (LJ) or hard core attractive Yukawa particles immersed in small LJ solvent bath at supercritical state. Comparison between the present prediction with a hypernetted chain approximation adopted for solute-solute correlation at infinitely dilute limit and existing simulation data shows high accuracy for the region with large separation, and qualitative reliability for the solute particle contact region. The calculational simplicity of the present recipe allows for a detailed investigation on the effect of the solute-solvent and solvent-solvent interaction details on the excess potential of mean force. The resultant conclusion is that gathering of solvent particles near a solute particle leads to repulsive excess PMF, while depletion of solvent particles away from the solute particle leads to attractive excess PMF, and minor change of the solvent-solvent interaction range has large influence on the excess PMF.

Encouraging Autonomy and Preparing for IELTS: Mutually Exclusive Goals?

Science.gov (United States)

Barrett-Lennard, Siri

1997-01-01

Suggests foreign students in Australia may not be getting preparation needed to integrate successfully into university study. Research is reviewed that indicates these students not only need help preparing for the International English Language Testing System (IELTS) but also with learning at an Australian university. Academic preparation courses…

Preparation and characterization of PVC /ENR/CNTs Nano composites

International Nuclear Information System (INIS)

Ratnam, C.T.; Nur Azrini Ramlee; Keong, C.C.

2011-01-01

Poly (vinyl chloride), PVC/ epoxidized natural rubber blend, ENR/ carbon nano tubes, CNTs were prepared by using melt and solution blending methods. Addition of 2 phr of CNTs found to cause a drop in the tensile strength, Ts of the 50/ 50 PVC/ ENR blend. The nano composites prepared by the melt blending method exhibited higher values of Ts compared to the nano composites prepared by solution blending. Melt blending found to be an efficient method to prepare PVC/ ENR/ CNTs nano composites. (author)

Effect of preparation duration diminution in shot put through neurovegetative activity

Directory of Open Access Journals (Sweden)

A Dittmar

2003-12-01

Full Text Available Recently, time allocated to athletes concentration has been reduced to 1 minute. Increased activation and focused attention are thought to be important operations which influence performance during preparation. The aim of the study was to test whether reducing preparation time has an effect on subjects’ mental activity and consequently on performance. Ten subjects took part in the experiment. Each subject had to perform 14 throws: a 7 with preparation b 7 with no preparation. Autonomic nervous system activity was continuously recorded through six variables (2 electrodermal, 2 thermovascular and 2 cardiorespiratory variables. Performance was comparable in preparation and non-preparation modalities. Subjects increase their activation before throwing, however more rapidly without preparation time. Thus, performance was obtained through the same activation level whatever the time allocated to prepare. Shot-put performance seems to be dependent upon execution quality but also on reaching an optimal activation level. Phasic autonomic responses (related to focused attention and movement programming were recorded during preparation and execution. Only a weak relationship was evidenced between vegetative responses in preparation and execution phases. Thus, vegetative responses during the preparation phase did not attest mental operations such as focusing attention on a technical aspect.

Final Report for X-ray Diffraction Sample Preparation Method Development

Energy Technology Data Exchange (ETDEWEB)

Ely, T. M. [Hanford Site (HNF), Richland, WA (United States); Meznarich, H. K. [Hanford Site (HNF), Richland, WA (United States); Valero, T. [Hanford Site (HNF), Richland, WA (United States)

2018-01-30

WRPS-1500790, “X-ray Diffraction Saltcake Sample Preparation Method Development Plan/Procedure,” was originally prepared with the intent of improving the specimen preparation methodology used to generate saltcake specimens suitable for XRD-based solid phase characterization. At the time that this test plan document was originally developed, packed powder in cavity supports with collodion binder was the established XRD specimen preparation method. An alternate specimen preparation method less vulnerable, if not completely invulnerable to preferred orientation effects, was desired as a replacement for the method.

Isolation and preparation of 3H-tetrandrine

International Nuclear Information System (INIS)

Xunyang Huang; Yin Wang; Zangde Lu

1994-01-01

Tetrandrine is a bisbenzytehahydroisoquinoline alkaloid. Its structure is very complex and the preparation of labeled derivatives is difficult. We have prepared 3 H-tetrandrine using the tritium gas exposure method. This method produces many fragments which make isolation and purification of small quantities difficult. We investigated these fragments of unlabeled d-tetrandrine and found almost all contain one to several hydroxide groups. Using this information, we designed a two-step paper chromatography method for isolation and purification citric acid buffer to the paper to block the migration of hydroxide group fragments of tetrandrine. 3 H-tetrandrine was successfully prepared with a radiochemical purity of 90%. (author)

Newly introduced sample preparation techniques: towards miniaturization.

Science.gov (United States)

Costa, Rosaria

2014-01-01

Sampling and sample preparation are of crucial importance in an analytical procedure, representing quite often a source of errors. The technique chosen for the isolation of analytes greatly affects the success of a chemical determination. On the other hand, growing concerns about environmental and human safety, along with the introduction of international regulations for quality control, have moved the interest of scientists towards specific needs. Newly introduced sample preparation techniques are challenged to meet new criteria: (i) miniaturization, (ii) higher sensitivity and selectivity, and (iii) automation. In this survey, the most recent techniques introduced in the field of sample preparation will be described and discussed, along with many examples of applications.

49 CFR 192.235 - Preparation for welding.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Preparation for welding. 192.235 Section 192.235... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192.235 Preparation for welding. Before beginning any welding, the welding surfaces must be clean and free of any material that...

Dissipative preparation of entanglement in optical cavities

DEFF Research Database (Denmark)

Kastoryano, Michael James; Reiter, Florentin; Sørensen, Anders Søndberg

2011-01-01

We propose a novel scheme for the preparation of a maximally entangled state of two atoms in an optical cavity. Starting from an arbitrary initial state, a singlet state is prepared as the unique fixed point of a dissipative quantum dynamical process. In our scheme, cavity decay is no longer...

40 CFR 86.531-78 - Vehicle preparation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Vehicle preparation. 86.531-78 Section... (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES Emission Regulations for 1978 and Later New Motorcycles; Test Procedures § 86.531-78 Vehicle preparation. (a) The manufacturer...