Measuring radioactive half-lives via statistical sampling in practice

Science.gov (United States)

Lorusso, G.; Collins, S. M.; Jagan, K.; Hitt, G. W.; Sadek, A. M.; Aitken-Smith, P. M.; Bridi, D.; Keightley, J. D.

2017-10-01

The statistical sampling method for the measurement of radioactive decay half-lives exhibits intriguing features such as that the half-life is approximately the median of a distribution closely resembling a Cauchy distribution. Whilst initial theoretical considerations suggested that in certain cases the method could have significant advantages, accurate measurements by statistical sampling have proven difficult, for they require an exercise in non-standard statistical analysis. As a consequence, no half-life measurement using this method has yet been reported and no comparison with traditional methods has ever been made. We used a Monte Carlo approach to address these analysis difficulties, and present the first experimental measurement of a radioisotope half-life (211Pb) by statistical sampling in good agreement with the literature recommended value. Our work also focused on the comparison between statistical sampling and exponential regression analysis, and concluded that exponential regression achieves generally the highest accuracy.

Standard-Model Tests with Superallowed β-Decay: An Important Application of Very Precise Mass Measurements

International Nuclear Information System (INIS)

Hardy, J. C.; Towner, I. S.

2001-01-01

Superallowed β-decay provides a sensitive means for probing the limitations of the Electroweak Standard Model. To date, the strengths (ft-values) of superallowed 0 +→ 0 + β-decay transitions have been determined with high precision from nine different short-lived nuclei, ranging from 10 C to 54 Co. Each result leads to an independent measure for the vector coupling constant G V and collectively the nine values can be used to test the conservation of the weak vector current (CVC). Within current uncertainties, the results support CVC to better than a few parts in 10,000 - a clear success for the Standard Model! However, when the average value of G V , as determined in this way, is combined with data from decays of the muon and kaon to test another prediction of the Standard Model, the result is much more provocative. A test of the unitarity of the Cabibbo-Kobayashi-Maskawa matrix fails by more than two standard deviations. This result can be made more definitive by experiments that require extremely precise mass measurements, in some cases on very short-lived (≤100 ms) nuclei. This talk presents the current status and future prospects for these Standard-Model tests, emphasizing the role of precise mass, or mass-difference measurements. There remains a real challenge to mass-measurement technique with the opportunity for significant new results

Standards, calibration and quality assurance of 222Rn measurements in Sweden

International Nuclear Information System (INIS)

Falk, R.; Hagberg, N.; Mjoenes, L.; Moere, H.; Nyblom, L.; Swedjemark, G.A.

1994-01-01

Inhaled decay products of 222 Rn are the dominant components of the natural radiation exposure to the general population. Limits have been introduced in Sweden, and recommendations were made in 1980 for decreasing indoor 222 Rn concentration. The need for the coordinated calibration of measuring instruments as well as for quality assurance was obvious for both health and economic reasons. 222 Rn measurements in Sweden are based on standards traceable to the National Institute of Standard and Technology (NIST) through the use of standard reference material 226 Ra. Standards for both 222 Rn and short-lived 222 Rn progeny are described together with the reference instrument adopted for these studies. The calibration of field instruments was performed in a ''radon room'', a climate chamber in which it is possible to vary and monitor the concentration of 222 Rn as well as other characteristics of the indoor air such as temperature, humidity, ventilation rate and aerosol concentration. The rules and regulations for field measurements imply a calibration of the instruments yearly, as well as accreditation and training for the companies that carry out the measurements. Examples are given of the official measurement protocols used for the different types of instruments. (orig.)

Measurements of beta-decay half-lives of short-lived nuclei

Energy Technology Data Exchange (ETDEWEB)

Hirose, T.; Tsurita, Y.; Yamamoto, H.; Kawade, K. [Nagoya Univ. (Japan); Iida, T.; Takahashi, A.; Kasugai, Y.; Ikeda, Y.

1997-03-01

The {beta}-decay half-lives of short-lived nuclei produced by 14 MeV neutron bombardments were measured with Ge detectors, a High-rate spectroscopy amplifier (EG and G ORTEC model 973) and a Spectrum multi-scaler (Laboratory equipment corporation SMS-48) in the multi-scaling mode. The adequate corrections for pile-up and dead-time losses were made by applying source and pulser methods. The half-lives of {sup 53}V, {sup 53g}Fe, {sup 89m}Y and {sup 162}Tb were determined with uncertainties of 0.13-0.65%. It has been shown that previous values shorter than 10 min were systematically longer than the present ones. (author)

Risk measures in living probabilistic safety assessment

International Nuclear Information System (INIS)

Holmberg, J.; Niemelae, I.

1993-05-01

The main objectives of the study are: to define risk measures and suggested uses of them in various living PSA applications for the operational safety management and to describe specific model features required for living PSA applications. The report is based on three case studies performed within the Nordic research project Safety Evaluation by Use of Living PSA and Safety Indicators. (48 refs., 11 figs., 17 tabs.)

Life and Death in the City: Demography and Living Standards during Stockholm's Industrialization

DEFF Research Database (Denmark)

Molitoris, Joseph John

2015-01-01

’s intergenerational social mobility, and infant and child mortality during Stockholm’s industrialization and fertility transition. The results of this work challenge many existing explanations of the fertility decline and reveal how, despite overall improvements in living standards, elite socioeconomic groups were......This dissertation uses longitudinal micro-data from Stockholm between 1878 and 1926 to study the causes and consequences of the fertility transition and to examine the development of living standards inequality during industrialization. Although both processes have received much interest from...... able to continually leverage their superior resources to maintain significantly lower levels of infant and child mortality....

Live weight and body measurement of Hungarian Thoroughbred broodmares

Directory of Open Access Journals (Sweden)

Szabolcs Bene

2013-09-01

Full Text Available Live weights and 21 body measurements of 110 adult brood mares from Thoroughbred breed were evaluated in Hungary. Body measurements and some body measure indices were determined. One way ANOVA was used to compare the studs. Regression equations were developed to estimate the live weight from body measurements. Population genetic parameters of the examined traits were estimated. Only few differences among studs, concerning evaluated body measurements, were presented - firstly: body measurements, related to the kilter and nutritional status (hearth girth - were significant. Between the mentioned traits and the live weight medium positive correlation (r = 0.47 - 0.79; P<0.01 was found. For the estimation of live weight with regression model the necessary data are as follows: hearth girth, 2nd width of rump and diagonal length of body. The determination coefficient was 0.80 (P<0.01. Height at withers, of back and at rump (h2 = 0.66, 0.67 and 0.51 showed medium heritability values. The heritability of depth of chest and height of bieler-point were 0.32 and 0.48, respectively. Quite small differences were found between the stallions in most of the body measurements. The live weight and height measurements were exceptions, as here the differences between the sires were slightly higher. As a conclusion it can be stated that the Thoroughbred population in Hungary is quite homogenous in terms of the most important body measurements.

Standardization of {sup 67}Ga, {sup 51}Cr and {sup 55}Fe by live-timed anti-coincidence counting with extending dead time

Energy Technology Data Exchange (ETDEWEB)

Silva, Carlos J. da [Laboratorio Nacional de Metrologia das Radiacoes Ionizantes (LNMRI), Instituto de Radioprotecao e Dosimetria (IRD), Comissao Nacional de Energia Nuclear - CNEN, Av. Salvador Allende, s/n0-Recreio, CEP 22780-160 Rio de Janeiro (Brazil) and Laboratorio de Instrumentacao Nuclear (LIN/PEN/COPPE/UFRJ), Caixa Postal 68590, CEP 21945-970 Rio de Janeiro (Brazil)], E-mail: Carlos@ird.gov.br; Iwahara, A.; Poledna, R.; Bernardes, E.M. de O; Prinzio, M.A.R.R. de [Laboratorio Nacional de Metrologia das Radiacoes Ionizantes (LNMRI), Instituto de Radioprotecao e Dosimetria (IRD), Comissao Nacional de Energia Nuclear - CNEN, Av. Salvador Allende, s/n0-Recreio, CEP 22780-160 Rio de Janeiro (Brazil); Lopes, Ricardo T. [Laboratorio de Instrumentacao Nuclear (LIN/PEN/COPPE/UFRJ), Caixa Postal 68590, CEP 21945-970 Rio de Janeiro (Brazil)

2008-02-15

In this work, the activity standardization of {sup 51}Cr, {sup 55}Fe and {sup 67}Ga by live-timed anti-coincidence counting with extending dead time is described. The difficulties of the method, the uncertainties of the results of the measurements and the comparison of these results with others measurement methods are discussed.

Radioactivity measurements on live Bewick's Swans

International Nuclear Information System (INIS)

Hancock, R.; Wollam, P.B.

1987-01-01

Measurements made on 46 live swans at Slimbridge using portable high resolution hyperpure germanium gamma ray spectrometry equipment are described. Laboratory measurements are also reported on two swans which died of natural causes or of flying accidents. The implications of the measured radioactivity levels are discussed in relation to the suggestion that they might have been affected by the Chernobyl accident on their migration. (UK)

A composite perspective on British living standards during the Industrial Revolution

NARCIS (Netherlands)

Gallardo Albarrán, Daniel

2016-01-01

Few topics in economic history have received more attention than the profound transformations undergone by Great Britain during the 18th and 19th century. Even though the positive outcomes of this process for human living standards nowadays are not disputed, the same does not apply to the century

Standard-Setting Methods as Measurement Processes

Science.gov (United States)

Nichols, Paul; Twing, Jon; Mueller, Canda D.; O'Malley, Kimberly

2010-01-01

Some writers in the measurement literature have been skeptical of the meaningfulness of achievement standards and described the standard-setting process as blatantly arbitrary. We argue that standard setting is more appropriately conceived of as a measurement process similar to student assessment. The construct being measured is the panelists'…

Mass Measurement of Very Short Half-Lived Nuclei

CERN Document Server

Duma, M; Iacob, V E; Thibault, C

2002-01-01

The MISTRAL (Mass measurements at ISolde with a Transmission RAdiofrequency spectrometer on-Line) experiment exploits a rapid measurement technique to make accurate mass determinations of very short-lived nuclei. The physics goals are to elucidate new nuclear structure effects and constrain nuclear mass models in regions of interest to nuclear astrophysics.\\\\ \\\\The spectrometer, installed in May 97, performed as promised in the proposal with mass resolution exceeding 100,000. In its first experiment in July 1998, neutron-rich Na isotopes having half-lives as short as 31 ms were measured. A second experiment in November 1998 enabled us to improve the measurement precision of the isotopes $^{26-30}$Na to about 20 keV. The measurement program continues as experiment IS 373.

International Construction Measurement Standard

OpenAIRE

Mitchell, Charles

2016-01-01

The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports...

Development and validation of a new method to measure walking speed in free-living environments using the actibelt® platform.

Directory of Open Access Journals (Sweden)

Michaela Schimpl

Full Text Available Walking speed is a fundamental indicator for human well-being. In a clinical setting, walking speed is typically measured by means of walking tests using different protocols. However, walking speed obtained in this way is unlikely to be representative of the conditions in a free-living environment. Recently, mobile accelerometry has opened up the possibility to extract walking speed from long-time observations in free-living individuals, but the validity of these measurements needs to be determined. In this investigation, we have developed algorithms for walking speed prediction based on 3D accelerometry data (actibelt® and created a framework using a standardized data set with gold standard annotations to facilitate the validation and comparison of these algorithms. For this purpose 17 healthy subjects operated a newly developed mobile gold standard while walking/running on an indoor track. Subsequently, the validity of 12 candidate algorithms for walking speed prediction ranging from well-known simple approaches like combining step length with frequency to more sophisticated algorithms such as linear and non-linear models was assessed using statistical measures. As a result, a novel algorithm employing support vector regression was found to perform best with a concordance correlation coefficient of 0.93 (95%CI 0.92-0.94 and a coverage probability CP1 of 0.46 (95%CI 0.12-0.70 for a deviation of 0.1 m/s (CP2 0.78, CP3 0.94 when compared to the mobile gold standard while walking indoors. A smaller outdoor experiment confirmed those results with even better coverage probability. We conclude that walking speed thus obtained has the potential to help establish walking speed in free-living environments as a patient-oriented outcome measure.

Spatial divergence of living standards during the economic growth phase in the periphery: A case study of North Karelia

Directory of Open Access Journals (Sweden)

Olli Lehtonen

2011-01-01

Full Text Available The advisability of an urban-centred growth strategy in sparsely populated parts of Europe has not been much analysed at micro-levels such as that of the postcode area. This paper investigates how regional disparities in living standards continued to increase during the technology-driven growth phase of 1993−2003, as exemplified by the case of North Karelia in Finland. Urban sprawl conveyed the spread effects of the rise in incomes, and the upsurge of living standards was concentrated in the neighbourhood of the provincial centre, Joensuu. Living standards faced a process of double divergence: between the central district of Joensuu and its commuter belt, and between the provincial core area and its hinterland, the latter consisting of rural areas and small towns dependent largely on natural resources. The spatial outcome of this socio-economic reorganization is a three-zone core-periphery pattern. As the economy grew, geographical shifts in wealth were consequences of the growth and mobility of certain social groups and strata. A wave of high living standards towards the outskirts of the provincial centre was generated by an expansion in commuting. The relative decline in living standards in the periphery was due to long-term rural decline and involved spatial restructuring.

Inequality of living standards in Russia: internal and international context (the early 1990s and the 2000s

Directory of Open Access Journals (Sweden)

Vyacheslav Nikolaevich Bobkov

2013-09-01

Full Text Available The article studies the relationship of social groups about income distribution and goods consumption. It is dedicated to the internal and international aspects of inequality of living standards in Russia during the period of capitalist transformations of 1990-2000’s. Problems of the dynamics of inequality in living standards are analyzed. Methods of comparative analysis and comparison of performance indicators with normative social standards are used. On this basis, the population is classified into social groups and then follows the analysis of their social position. Such indicators are used: income inequality by consumption; inequality by housing, by education and health care availability. Russia is compared with countries of G20. Social inequality reasons in Russia are revealed. The obtained results can be applied within national economic and social policy. The findings indicated that the high social inequality in Russia undermines the ability of a large part of the population to be «included» in economic growth, for it limits access to its results. In such situation, an attempt to solve both the problem of speeding up economic growth and the eradication of poverty cannot lead to success if appropriate measures to reduce social inequality are not developed and implemented.

Up-to-date information about China's population and living standards.

Science.gov (United States)

1994-04-01

China's rate of natural increase was 11.45/1000 in 1993, as a result of the crude birth rate of 18.09/1000 and a crude death rate of 6.64/1000. The total population in 1993 was 1,185.17 million. There was an increase of 13.46 million between 1992 and 1993. Personal income increased by 28% to RMB 2337 yuan in 1993, which was a real growth of 10.2%. Rural income increased by 3.2% (adjusted for inflation to 921 yuan). The urban and rural gap widened and living standards declined for some populations. Urban unemployment was 2.6% in 1993, and 128,000 unemployed persons received some assistance. Employment increased to 150.4 million, which was an increase of 2.48 million workers. Private sector and state owned business employment increased. Wages increased by 21.1% to RMB 477 billion yuan for all workers. The average per person wage increased by 19.4% to RMB 3236 yuan. Living conditions as measured by total floor space improved for the urban and rural populations. Social welfare beds available also increased. 40.51 million people received relief funds in rural and urban areas. 31.5% of townships and towns had a social security system. 97,000 community service networks were established in 1993. The number of retired urban persons receiving old age pensions from the community increased. This constituted a change from retirees receiving pensions from their work units. The number of environmental protection workers amounted to 81,000 by the end of 1993. 2290 environmental monitoring stations employed 33,000 workers. 77 national natural reserves were secured by 1993, of which 10 are members of the Man and Biosphere International Protection Network. Standards have been established for assuring environmental quality in 313 ways. Soot control zones were established in 472 cities and numbered 2935. Environmental noise control zones in 363 cities were established; the zones numbered 1774 and covered 3689 sq. miles. 5737 projects were established dealing with environmental

Measurement of short-lived particles at PETRA

International Nuclear Information System (INIS)

Saxon, D.H.

1987-04-01

The contribution of PETRA to the measurement of short-lived particles is reviewed with discussion of the detectors and analysis techniques. New results are presented on lifetimes of identified particles and the systematics of b-life measurement outlined. The first application of vertex-tagging to flavour separation is described. (author)

Do Large-Scale Exams Adequately Assess Inquiry? An Evaluation of the Alignment of the Inquiry Behaviors in New York State's "Living Environment Regents Examination" to the NYS Inquiry Standard

Science.gov (United States)

Day, Heather L.; Matthews, Dorothy M.

2008-01-01

The "Living Environment Regents Examination" is meant to provide a measure of the quality of New York State students' knowledge and understanding of biological content and science inquiry ability, as it is defined in the "MST Standards" and the "Living Environment Core Curriculum". This article examines the degree to…

77 FR 33969 - Standards for Living Organisms in Ships' Ballast Water Discharged in U.S. Waters

Science.gov (United States)

2012-06-08

...-10486] RIN 1625-AA32 Standards for Living Organisms in Ships' Ballast Water Discharged in U.S. Waters... Living Organisms in Ships' Ballast Water Discharged in U.S. Waters.'' Six technical errors were.... Waters.'' Six technical errors were inadvertently published in the final rule that require correction...

Standardization of UV LED measurements

Science.gov (United States)

Eppeldauer, G. P.; Larason, T. C.; Yoon, H. W.

2015-09-01

Traditionally used source spectral-distribution or detector spectral-response based standards cannot be applied for accurate UV LED measurements. Since the CIE standardized rectangular-shape spectral response function for UV measurements cannot be realized with small spectral mismatch when using filtered detectors, the UV measurement errors can be several times ten percent or larger. The UV LEDs produce broadband radiation and both their peaks or spectral bandwidths can change significantly. The detectors used for the measurement of these LEDs also have different spectral bandwidths. In the discussed example, where LEDs with 365 nm peak are applied for fluorescent crack-recognition using liquid penetrant (non-destructive) inspection, the broadband radiometric LED (signal) measurement procedure is standardized. A UV LED irradiance-source was calibrated against an FEL lamp standard to determine its spectral irradiance. The spectral irradiance responsivity of a reference UV meter was also calibrated. The output signal of the reference UV meter was calculated from the spectral irradiance of the UV source and the spectral irradiance responsivity of the reference UV meter. From the output signal, both the integrated irradiance (in the reference plane of the reference meter) and the integrated responsivity of the reference meter were determined. Test UV meters calibrated for integrated responsivity against the reference UV meter, can be used to determine the integrated irradiance from a field UV source. The obtained 5 % (k=2) measurement uncertainty can be decreased when meters with spectral response close to a constant value are selected.

Retirement plan participation and features and standard of living of Americans 55 or older.

Science.gov (United States)

Copeland, Craig

2002-08-01

This Issue Brief is the third in a series of Employee Benefit Research Institute (EBRI) publications based on data collected in 1998 and released in 2002 as the Retirement and Pension Plan Coverage Topical Module of the 1996 Survey of Income and Program Participation (SIPP). This report completes the series by examining the survey's more detailed questions concerning workers' employment-based retirement plans. Specifically, it examines the percentage of workers who are participating in a plan, and also workers' reasons for not participating in a plan when working in a job where a plan is sponsored; the features of, or decisions made concerning salary reduction plans; historical participation in employment-based retirement plans; and a comparison of the standard of living of individuals age 55 or older with their living standard in their early 50s. As of June 1998, 64.3 percent of wage and salary workers age 16 or older worked for an employer or union that sponsored any type of retirement plan (defined contribution or defined benefit) for any of its employees or members (the "sponsorship rate"). Almost 47 percent of these wage and salary workers participated in a plan (the "participation rate"), with 43.2 percent being entitled to a benefit or eligible to receive a lump-sum distribution from a plan if their job terminated at the time of survey (the "vested rate"). The predominant reason for choosing not to participate in a retirement plan was that doing so was unaffordable. The eligible participation rate for salary reduction plans was 81.4 percent. Fifty-six percent of all workers have participated in some type of retirement plan sometime during their work life through 1998. For those ages 51-60, almost 72 percent have ever participated in a plan. The median account balance in salary reduction plans in 1998 was $14,000. In 1998, 12.9 percent of salary reduction plan participants eligible to take a loan had done so, and the average outstanding loan balance was $5

Dialects and standard language: the language education of the italians living in Italy, and contexts of immigration (1861-2015

Directory of Open Access Journals (Sweden)

Paula Garcia de Freitas

2015-09-01

Full Text Available This paper aims to present the relationship existent between the standard Italian language, and the dialects used both in the language education of Italians living in Italy, and of Italians living in Brazil, to where they emigrated in search of better opportunities from the middle of the century XIX. This relationship is analyzed under the prism of different political and educational measures sanctioned by both countries, which somehow represent a subjective position on the language concept. Initially, the analysis was focused on how unstable such a relationship has been in Italy, varying from phases of great antagonism to phases of cooperation, since the dialects were used as a complementary tool in the teaching/learning process of the standard Italian language. Secondly, the analysis was focused on how this same relationship happened in the immigration context, particularly with regards to Brazil, where the Italian language and its dialects were mixed with Portuguese. Our conclusion offers an overview on the current stage, and the perspectives for the teaching of the Italian language both in Italy and in Brazil.

Cost-effectiveness of a mild compared with a standard strategy for IVF: a randomized comparison using cumulative term live birth as the primary endpoint.

Science.gov (United States)

Polinder, S; Heijnen, E M E W; Macklon, N S; Habbema, J D F; Fauser, B J C M; Eijkemans, M J C

2008-02-01

BACKGROUND Conventional ovarian stimulation and the transfer of two embryos in IVF exhibits an inherent high probability of multiple pregnancies, resulting in high costs. We evaluated the cost-effectiveness of a mild compared with a conventional strategy for IVF. METHODS Four hundred and four patients were randomly assigned to undergo either mild ovarian stimulation/GnRH antagonist co-treatment combined with single embryo transfer, or standard stimulation/GnRH agonist long protocol and the transfer of two embryos. The main outcome measures are total costs of treatment within a 12 months period after randomization, and the relationship between total costs and proportion of cumulative pregnancies resulting in term live birth within 1 year of randomization. RESULTS Despite a significantly increased average number of IVF cycles (2.3 versus 1.7; P costs over a 12-month period (8333 versus euro10 745; P = 0.006) were observed using the mild strategy. This was mainly due to higher costs of the obstetric and post-natal period for the standard strategy, related to multiple pregnancies. The costs per pregnancy leading to term live birth were euro19 156 in the mild strategy and euro24 038 in the standard. The incremental cost-effectiveness ratio of the standard strategy compared with the mild strategy was euro185 000 per extra pregnancy leading to term live birth. CONCLUSIONS Despite an increased mean number of IVF cycles within 1 year, from an economic perspective, the mild treatment strategy is more advantageous per term live birth. It is unlikely, over a wide range of society's willingness-to-pay, that the standard treatment strategy is cost-effective, compared with the mild strategy.

Prediction of retail beef yield and fat content from live animal and carcass measurements in Nellore cattle.

Science.gov (United States)

Sakamoto, L S; Mercadante, M E Z; Bonilha, S F M; Branco, R H; Bonilha, E F M; Magnani, E

2014-11-01

Data from 156 Nellore males were used to develop equations for the prediction of retail beef yield and carcass fat content, expressed as kilograms and as a percentage, from live animal and carcass measurements. Longissimus muscle area and backfat and rump fat thickness were measured by ultrasound up to 5 d before slaughter and fasted live weight was determined 1 d before slaughter. The same traits were obtained after slaughter. The carcass edible portion (CEP in kg and CEP% in percentage; n = 116) was calculated by the sum of the edible portions of primal cuts: hindquarter, forequarter, and spare ribs. Trimmable fat from the carcass boning process, with the standardization of about 3 mm of fat on retail beef, was considered to be representative of carcass fat content. Most of the variation in CEP was explained by fasted live weight or carcass weight (R(2) of 0.92 and 0.96); the same occurred for CEP% (R(2) of 0.15 and 0.13), and for CEP, the inclusion of LM area and fat thickness reduced the equation bias (lower value of Mallow's Cp statistics). For trimmable fat, most variation could be explained by weight or rump fat thickness. In general, the equations developed from live animal measurements showed a predictive power similar to the equations using carcass measurements. In all cases, the traits expressed as kilograms were better predicted (R(2) of 0.39 to 0.96) than traits expressed as a percentage (R(2) of 0.08 to 0.42).

Dietary intake in midlife and associations with standard of living, education and nutrition literacy.

Science.gov (United States)

Wall, Catherine L; Gearry, Richard B; Pearson, John; Parnell, Winsome; Skidmore, Paula M L

2014-07-04

Cardiovascular disease is a leading cause of death in New Zealand, but risk factors may be decreased by consuming a heart healthy diet. This pilot study investigated whether participants met the guidelines for a heart healthy diet and whether a novel heart healthy dietary pattern could be identified using principal components analysis (PCA). The second aim of this project was to assess if higher education, standard of living and nutrition literacy are associated with a heart healthy dietary pattern. This exploratory study was undertaken using data from the first participants enrolled in the Canterbury Health Ageing and Lifecourse study: an observational study of 50 year olds in the Canterbury District Health Board region. Eighty-two people were selected from the General and Maori electoral role and interviewed prior to the 22 February 2011 Christchurch Earthquake. PCA was conducted to identify dietary patterns, based on intake of specific nutrients as indicated by the New Zealand and international heart healthy dietary guidelines. 62 participants completed questionnaires and an estimated food record. No participants met all five of the heart healthy dietary guidelines. One dietary pattern was produced by PCA: a "higher CVD risk" pattern. Regression analysis indicated that higher standard of living, education and nutrition literacy were inversely associated with a "higher CVD risk" pattern. Higher standard of living, education and nutrition literacy were associated with a healthier dietary eating pattern. However, as no participants met all the dietary recommendations more education and support is needed to help people meet these.

Postmortem Inventories in Medieval Valencia. A Source for the Study of Household Consumption and Living Standards

Directory of Open Access Journals (Sweden)

Luis Almenar Fernández

2017-12-01

Full Text Available Basic questions about the nature of postmortem inventories in late medieval Valencia have rarely been asked. What distinguished them from other lists of goods and what was their legal basis? Why were inventories made? Which goods were listed and which ones omitted? How many inventories are preserved today? Which sectors of medieval society requested them? The answers that this paper provides clearly show the potential of a serial and quantitative usage of the Valencian inventory for the study of household consumption, an analysis that would enable us to measure far more accurately the changes in living standards in late medieval society to a degree that is difficult to achieve in other regions of Europe.

Estimation of standard liver volume in Chinese adult living donors.

Science.gov (United States)

Fu-Gui, L; Lu-Nan, Y; Bo, L; Yong, Z; Tian-Fu, W; Ming-Qing, X; Wen-Tao, W; Zhe-Yu, C

2009-12-01

To determine a formula predicting the standard liver volume based on body surface area (BSA) or body weight in Chinese adults. A total of 115 consecutive right-lobe living donors not including the middle hepatic vein underwent right hemi-hepatectomy. No organs were used from prisoners, and no subjects were prisoners. Donor anthropometric data including age, gender, body weight, and body height were recorded prospectively. The weights and volumes of the right lobe liver grafts were measured at the back table. Liver weights and volumes were calculated from the right lobe graft weight and volume obtained at the back table, divided by the proportion of the right lobe on computed tomography. By simple linear regression analysis and stepwise multiple linear regression analysis, we correlated calculated liver volume and body height, body weight, or body surface area. The subjects had a mean age of 35.97 +/- 9.6 years, and a female-to-male ratio of 60:55. The mean volume of the right lobe was 727.47 +/- 136.17 mL, occupying 55.59% +/- 6.70% of the whole liver by computed tomography. The volume of the right lobe was 581.73 +/- 96.137 mL, and the estimated liver volume was 1053.08 +/- 167.56 mL. Females of the same body weight showed a slightly lower liver weight. By simple linear regression analysis and stepwise multiple linear regression analysis, a formula was derived based on body weight. All formulae except the Hong Kong formula overestimated liver volume compared to this formula. The formula of standard liver volume, SLV (mL) = 11.508 x body weight (kg) + 334.024, may be applied to estimate liver volumes in Chinese adults.

Ambient assisted living healthcare frameworks, platforms, standards, and quality attributes.

Science.gov (United States)

Memon, Mukhtiar; Wagner, Stefan Rahr; Pedersen, Christian Fischer; Beevi, Femina Hassan Aysha; Hansen, Finn Overgaard

2014-03-04

Ambient Assisted Living (AAL) is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Ambient Assisted Living Healthcare Frameworks, Platforms, Standards, and Quality Attributes

Directory of Open Access Journals (Sweden)

Mukhtiar Memon

2014-03-01

Full Text Available Ambient Assisted Living (AAL is an emerging multi-disciplinary field aiming at exploiting information and communication technologies in personal healthcare and telehealth systems for countering the effects of growing elderly population. AAL systems are developed for personalized, adaptive, and anticipatory requirements, necessitating high quality-of-service to achieve interoperability, usability, security, and accuracy. The aim of this paper is to provide a comprehensive review of the AAL field with a focus on healthcare frameworks, platforms, standards, and quality attributes. To achieve this, we conducted a literature survey of state-of-the-art AAL frameworks, systems and platforms to identify the essential aspects of AAL systems and investigate the critical issues from the design, technology, quality-of-service, and user experience perspectives. In addition, we conducted an email-based survey for collecting usage data and current status of contemporary AAL systems. We found that most AAL systems are confined to a limited set of features ignoring many of the essential AAL system aspects. Standards and technologies are used in a limited and isolated manner, while quality attributes are often addressed insufficiently. In conclusion, we found that more inter-organizational collaboration, user-centered studies, increased standardization efforts, and a focus on open systems is needed to achieve more interoperable and synergetic AAL solutions.

Standardization in measurement philosophical, historical and sociological issues

CERN Document Server

Schlaudt, Oliver

2015-01-01

The application of standard measurement is a cornerstone of modern science. In this collection of essays, standardization of procedure, units of measurement and the epistemology of standardization are addressed by specialists from sociology, history and the philosophy of science.

Decision support systems for power plants impact on the living standard

International Nuclear Information System (INIS)

Chatzimouratidis, Athanasios I.; Pilavachi, Petros A.

2012-01-01

Highlights: ► Ten major types of power plant are evaluated as to their impact on living standard. ► Uncertainty in both criteria performance and criteria weighting is considered. ► PROMETHEE II method, 12 criteria and 13 scenarios are used. ► Results are presented per scenario and per type of power plant. ► Optimal solution depends on scenario assumptions of the decision maker. - Abstract: In developed countries, the quality of life is of first priority and an overall assessment of power plant impact on the living standard requires a multicriteria analysis of both positive and negative factors incorporating uncertainty in criteria performance and probability assessment of weighting factors. This study incorporates PROMETHEE II to assess 10 major types of power plant under 12 criteria, 13 fixed and infinite customized probability assessed weight set scenarios. The power plants considered are coal/lignite, oil, natural gas turbine, natural gas combined cycle, nuclear, hydro, wind, photovoltaic, biomass and geothermal. Geothermal, wind and photovoltaic power plants are excellent choices in most of the cases and biomass and hydro should also be preferred to nuclear and fossil fuel. Among nuclear and fossil fuel the choice is based on the specific parameters of each case examined while natural gas technologies have specific advantages. The motivation of this study was to provide a tool for the decision-maker to evaluate all major types of power plant incorporating multicriteria and customized probability assessment of weighting factors.

Standardization of depression measurement

DEFF Research Database (Denmark)

Wahl, Inka; Löwe, Bernd; Bjørner, Jakob

2014-01-01

OBJECTIVES: To provide a standardized metric for the assessment of depression severity to enable comparability among results of established depression measures. STUDY DESIGN AND SETTING: A common metric for 11 depression questionnaires was developed applying item response theory (IRT) methods. Data...... of 33,844 adults were used for secondary analysis including routine assessments of 23,817 in- and outpatients with mental and/or medical conditions (46% with depressive disorders) and a general population sample of 10,027 randomly selected participants from three representative German household surveys....... RESULTS: A standardized metric for depression severity was defined by 143 items, and scores were normed to a general population mean of 50 (standard deviation = 10) for easy interpretability. It covers the entire range of depression severity assessed by established instruments. The metric allows...

Population Pressure, Global Living Standards, and the Promise of Space Solar Power

Science.gov (United States)

Strickland, John K., Jr.

2002-01-01

What many sincere environmentalists advocate: (severe restrictions on energy use, to reduce global warming), may actually end up being very harmful to the environment. Since 85 percent of the global energy use is derived from carbon based fossil fuels, this may seem to be a reasonable position. However, the proponents of energy use restrictions are ignoring some very important relationships. The greatest damage to the environment, in terms of species loss, is loss and/or human modification of habitat. The two greatest threats to habitat seem to be (1) population pressure and (2) logging. Logging does not necessarily permanently occupy the land, while either default squatter occupation or "colonization by policy" is often permanent. Increased population degrades the land by causing over- farming, and also creates an ever greater demand for raw materials and food resources. Poor people have no time nor money to think about or help save the environment. Therefore the greatest threat to species survival is human population growth and its frequent companion: poverty. There is an existing way to reduce population growth, and thus to reduce pressure on habitats, called "raising the standard of living". Wherever it succeeds, population growth slows rapidly. In many European countries, there would be a negative population growth if not for immigration. Personal energy use is closely correlated with living standards, and it is impossible to have a higher living standard without a higher degree of personal energy use. It would seem, however, that extending high living standards to the developing world would create an even greater demand for the use of fossil fuels. The solution to this dilemma can only be found in the use of very high capacity sources of non- fossil energy that do not significantly damage the environment. Are there sources of clean, economical energy with a large enough combined capacity to provide high living standards for the whole world, including those

Community influences on intimate partner violence in India: Women's education, attitudes towards mistreatment and standards of living.

Science.gov (United States)

Boyle, Michael H; Georgiades, Katholiki; Cullen, John; Racine, Yvonne

2009-09-01

Intimate partner violence (IPV) directed towards women is a serious public health problem. Women's education may offer protection against IPV, but uncertainty exists over how it might reduce risk for IPV at the community and individual levels. The objectives of this study are to: (1) disentangle community from individual-level influences of women's education on risk for IPV; (2) quantify the moderating influence of communities on individual-level associations between women's education and IPV; (3) determine if women's attitudes towards mistreatment and living standards at the community and individual levels account for the protective influence of women's education; and (4) determine if the protective influence of education against IPV is muted among women living in communities exhibiting attitudes more accepting of mistreatment. Study information came from 68,466 married female participants in the National Family Health Survey conducted throughout India in 1998-1999. Multilevel logistic regression was used to address the study objectives. IPV showed substantial clustering at both the state (10.2%) and community levels (11.5%). At the individual level, there was a strong non-linear association between women's education and IPV, partially accounted for by household living standards. The strength of association between women's education and IPV varied from one community to the next with evidence that the acceptance of mistreatment at the community level mutes the protective influence of higher education. Furthermore, women's attitudes towards mistreatment and their standards of living accounted for community-level associations between women's education and IPV. Place of residence accounted for substantial variation in risk of IPV and also modified individual-level associations between IPV and women's education. At the community level, women's education appeared to exert much of its protective influence by altering population attitudes towards the acceptability of

Measuring kidney patients' motivation to pursue living donor kidney transplant: development of stage of change, decisional balance and self-efficacy measures.

Science.gov (United States)

Waterman, Amy D; Robbins, Mark L; Paiva, Andrea L; Peipert, John D; Davis, LaShara A; Hyland, Shelley S; Schenk, Emily A; Baldwin, Kari A; Amoyal, Nicole R

2015-02-01

While educational interventions to increase patient motivation to pursue living donor kidney transplant have shown success in increasing living donor kidney transplant rates, there are no validated, theoretically consistent measures of Stage of Change, a measure of readiness to pursue living donor kidney transplant; Decisional Balance, a weighted assessment of living donor kidney transplant's advantages/disadvantages; and Self-Efficacy, a measure of belief that patients can pursue living donor kidney transplant in difficult circumstances. This study developed and validated measures of these three constructs. In two independent samples of kidney patients (N 1 = 279 and N 2 = 204), results showed good psychometric properties and support for their use in the assessment of living donor kidney transplant interventions. © The Author(s) 2013.

Student measurement of blood pressure using a simulator arm compared with a live subject's arm.

Science.gov (United States)

Lee, Jennifer J; Sobieraj, Diana M; Kuti, Effie L

2010-06-15

To compare accuracy of blood pressure measurements using a live subject and a simulator arm, and to determine students' preferences regarding measurement. This was a crossover study comparing blood pressure measurements from a live subject and a simulator arm. Students completed an anonymous survey instrument defining opinions on ease of measurement. Fifty-seven students completed blood pressure measurements on live subjects while 72 students completed blood pressure measurements using the simulator arm. There were no significant systematic differences between the 2 measurement techniques. Systolic blood pressure measurements from a live subject arm were less likely to be within 4 mm Hg compared with measurements of a simulator arm. Diastolic blood pressure measurements were not significantly different between the 2 techniques. Accuracy of student measurement of blood pressure using a simulator arm was similar to the accuracy with a live subject. There was no difference in students' preferences regarding measurement techniques.

Measurements of half-lives of short-lived nuclides

International Nuclear Information System (INIS)

Elmali, A.

2001-01-01

In this work 19 F(n,p) 19 O (26.94 sec.), 76 Ge(n,2n) 75m Ge(47.73 sec.), 23 Na(n,p) 23 Ne (37.24 sec.) 23 Na(n,α) 20 F (11.12 sec.), 68 Zn(n,p) 68g Cu (31.11 sec.), 46 Ti(n,P) 46m Sc (18.70 sec.), 19 F(n,α) 16 N (7.13 sec.) and 92 Mo(n,2n) 91m Mo (65.40 sec.) half lives were determined. The half life measurements were performed utilizing the Sames T-400 neutron generator at the Physics Department of Cekmece Nuclear Research and Training Center, Istanbul. Fast neutrons (∼ 14 MeV) were produced via T(d,n)He reaction in a TIT target which was bombarded by 300 KeV deuterons. The samples bombarded with 14 MeV neutrons were transferred with a fast sample transport system from neutron source to the HPGe detector were the gamma measurements are performed. The time elapsed during the transport of the sample between the two stations were about 0.5 sec. in the experimental data, corrections were made for coincidence summing, pules pile up, dead time and background elimination. In order to test the accuracy and the sensitivity of the half-life measurement system used in this work, the 19 O half life form the 19 F(n,p) 19 O reaction were measured first and compared with the data given in a recently published JAERI report

Status of Photovoltaic Calibration and Measurement Standards

Science.gov (United States)

Baraona, Cosmo; Bailey, Sheila; Curtis, Henry; Brinker, David; Jenkins, Phillip; Scheiman, David

2001-01-01

The 7th International Workshop on Space Solar Cell Calibration and Measurement was held on September 25-27, 2000 in Girdwood, Alaska. Representatives from eight countries discussed international standards for single and multijunction solar cell measurement and calibration methods, round robin intercomparisons, and irradiation test methods for space solar cells. Progress toward adoption of an ISO standard on single junction cells was made. Agreement was reached to begin work on new standards for multijunction cells and irradiation testing. Progress on present single junction round robin measurements was discussed and future multijunction round robins were planned. The next workshop will be held in Germany in October 2001.

The PROMIS Physical Function item bank was calibrated to a standardized metric and shown to improve measurement efficiency

DEFF Research Database (Denmark)

Rose, Matthias; Bjørner, Jakob; Gandek, Barbara

2014-01-01

OBJECTIVE: To document the development and psychometric evaluation of the Patient-Reported Outcomes Measurement Information System (PROMIS) Physical Function (PF) item bank and static instruments. STUDY DESIGN AND SETTING: The items were evaluated using qualitative and quantitative methods. A total...... response model was used to estimate item parameters, which were normed to a mean of 50 (standard deviation [SD]=10) in a US general population sample. RESULTS: The final bank consists of 124 PROMIS items covering upper, central, and lower extremity functions and instrumental activities of daily living...... to identify differences between age and disease groups. CONCLUSION: The item bank provides a common metric and can improve the measurement of PF by facilitating the standardization of patient-reported outcome measures and implementation of CATs for more efficient PF assessments over a larger range....

Virginia Standards of Learning (Grades 6 through 12) That Are Covered When Students Attend Live Performances of Shakespeare's Plays.

Science.gov (United States)

Brookshire, Cathy A.

This paper outlines Standards of Learning for grades 6-12 students in Virginia that are covered when they attend live performances of William Shakespeare's plays. The paper details separate standards for each grade in English, subdivided into standards which fulfill requirements in Oral Language, Reading/Literature, Writing, and Research, along…

Measuring the Restrictiveness of Living Environments for Children and Youth: Reconceptualizing Restriction

Science.gov (United States)

Rauktis, Mary E.; Huefner, Jonathan C.; O'Brien, Kirk; Pecora, Peter J.; Doucette, Ann; Thompson, Ronald W.

2009-01-01

The "Restrictiveness of Living Environment Scale" has long been the primary way to conceptualize the "restrictiveness" of a child's living situation. However, changes in systems of care and other factors have created a need to revisit how restrictiveness is conceptualized and measured. A measure was created to assess an environment's level of…

Measurements and standards for bulk-explosives detection

Energy Technology Data Exchange (ETDEWEB)

Hudson, Larry, E-mail: larry.hudson@nist.gov [National Institute of Standards and Technology, 100 Bureau Drive, Stop 8460, Gaithersburg, MD 20899 (United States); Bateman, Fred; Bergstrom, Paul; Cerra, Frank; Glover, Jack; Minniti, Ronaldo; Seltzer, Stephen; Tosh, Ronald [National Institute of Standards and Technology, 100 Bureau Drive, Stop 8460, Gaithersburg, MD 20899 (United States)

2012-07-15

Recent years have seen a dramatic expansion in the application of radiation and isotopes to security screening. This has been driven primarily by increased incidents involving improvised explosive devices as well as their ease of assembly and leveraged disruption of transportation and commerce. With global expenditures for security-screening systems in the hundreds of billions of dollars, there is a pressing need to develop, apply, and harmonize standards for x-ray and gamma-ray screening systems used to detect explosives and other contraband. The National Institute of Standards and Technology has been facilitating the development of standard measurement tools that can be used to gauge the technical performance (imaging quality) and radiation safety of systems used to screen luggage, persons, vehicles, cargo, and left-behind objects. After a review of this new suite of national standard test methods, test objects, and radiation-measurement protocols, we highlight some of the technical trends that are enhancing the revision of baseline standards. Finally we advocate a more intentional use of technical-performance standards by security stakeholders and outline the advantages this would accrue. - Highlights: Black-Right-Pointing-Pointer This work responds to the need for standards for x-ray screening systems used to detect explosives. Black-Right-Pointing-Pointer Described are new measurement tools to gage the performance and radiation safety of such systems. Black-Right-Pointing-Pointer A more intentional use of technical-performance standards by security stakeholders is argued.

Measurements and standards for bulk-explosives detection

International Nuclear Information System (INIS)

Hudson, Larry; Bateman, Fred; Bergstrom, Paul; Cerra, Frank; Glover, Jack; Minniti, Ronaldo; Seltzer, Stephen; Tosh, Ronald

2012-01-01

Recent years have seen a dramatic expansion in the application of radiation and isotopes to security screening. This has been driven primarily by increased incidents involving improvised explosive devices as well as their ease of assembly and leveraged disruption of transportation and commerce. With global expenditures for security-screening systems in the hundreds of billions of dollars, there is a pressing need to develop, apply, and harmonize standards for x-ray and gamma-ray screening systems used to detect explosives and other contraband. The National Institute of Standards and Technology has been facilitating the development of standard measurement tools that can be used to gauge the technical performance (imaging quality) and radiation safety of systems used to screen luggage, persons, vehicles, cargo, and left-behind objects. After a review of this new suite of national standard test methods, test objects, and radiation-measurement protocols, we highlight some of the technical trends that are enhancing the revision of baseline standards. Finally we advocate a more intentional use of technical-performance standards by security stakeholders and outline the advantages this would accrue. - Highlights: ► This work responds to the need for standards for x-ray screening systems used to detect explosives. ► Described are new measurement tools to gage the performance and radiation safety of such systems. ► A more intentional use of technical-performance standards by security stakeholders is argued.

Standard Model measurements with the ATLAS detector

Directory of Open Access Journals (Sweden)

Hassani Samira

2015-01-01

Full Text Available Various Standard Model measurements have been performed in proton-proton collisions at a centre-of-mass energy of √s = 7 and 8 TeV using the ATLAS detector at the Large Hadron Collider. A review of a selection of the latest results of electroweak measurements, W/Z production in association with jets, jet physics and soft QCD is given. Measurements are in general found to be well described by the Standard Model predictions.

Standardization of {sup 241}Am, {sup 124}Sb and {sup 131}I by live-timed anti-coincidence counting with extending dead time

Energy Technology Data Exchange (ETDEWEB)

Silva, Carlos J. da [Laboratorio Nacional de Metrologia das Radiacoes Ionizantes (LNMRI), Instituto de Radioprotecao e Dosimetria (IRD), Comissao Nacional de Energia Nuclear - CNEN, Av. Salvador Allende, s/n-Recreio, CEP 22780-160 Rio de Janeiro (Brazil) and Laboratorio de Instrumentacao Nuclear (LIN/PEN/COPPE/UFRJ), Caixa Postal 68590, CEP 21945-970 Rio de Janeiro (Brazil)], E-mail: Carlos@ird.gov.br; Iwahara, A.; Poledna, R.; Oliveira, E.M. de; Prinzio, M.A.R.R. de; Delgado, Jose U. [Laboratorio Nacional de Metrologia das Radiacoes Ionizantes (LNMRI), Instituto de Radioprotecao e Dosimetria (IRD), Comissao Nacional de Energia Nuclear - CNEN, Av. Salvador Allende, s/n-Recreio, CEP 22780-160 Rio de Janeiro (Brazil); Lopes, Ricardo T. [Laboratorio de Instrumentacao Nuclear (LIN/PEN/COPPE/UFRJ), Caixa Postal 68590, CEP 21945-970 Rio de Janeiro (Brazil)

2008-06-15

The National Metrology Laboratory for Ionizing Radiation (LNMRI)/Brazil has implemented a live-timed anti-coincidence system with extending dead time to complement the existing systems in its Radionuclide Laboratory for activity measurements of radioactive sources. In this new system, the proportional counter has been replaced by a liquid-scintillation-counter for alpha and beta detection. In order to test the performance of the new system, radioactive solutions of {sup 131}I, {sup 124}Sb and {sup 241}Am have been standardized. In this work the measurement method, the results and the associated uncertainties are described and discussed.

Conjectures and Contrivances: Economic Growth and the Standard of Living in Britain,During the Industrial Revolution

OpenAIRE

Charles Feinstein

1996-01-01

This paper presents new estimates of nominal earnings, the cost of living earnings for manual workers in Great Britain over the period 1770 to 1870. The estimates are adjusted to allow for unemployment and for the inclusion of agricultural workers in Ireland. The series are then analyzed to establish their implications for the debates about the impact of the industrial revolution on the standard of living; and about the pace of economic growth during this period. The main findings are that th...

Traceability and standardization of large dose measurement

International Nuclear Information System (INIS)

Tanaka, Ryuichi

1989-01-01

The reliability of dose control for radiation sterilization and food irradiation depends on the relative errors in measurements made by different dosimeters and the level of process control techniques as well as traceability. International efforts have been made for standardization of dose measurement procedures and process control techniques. A system for traceability of large dose measurement has already been established in the U.S. and Britain, and it has become urgent in Japan to establish a traceability system. For process control for radiation sterilization of medical tools, dose measurement is replacing the use of a biological indicator to play a more important role in relation to sterilization assurance. AAMI is making efforts to establish implementation standards for process control for industrial sterilization with electron beam. In Japan, the Radiation Irradiation Promotion Association has developed a manual 'Measurement of Dose of Electron Beam for Irradiation' to be used by users of electron beam for irradiation. Further efforts are required to establish a proper traceability system and standardization of dose measurement. (N.K.)

IMPACT OF THE FISCAL POLICIES ON THE STANDARD OF LIVING OF THE EMPLOYEES

Directory of Open Access Journals (Sweden)

PhD Elena PĂDUREAN

2013-03-01

Full Text Available The paper is a translation of the article published in issue no. 35 (2007 of Financial Studies. The concept of “quality of life” includes its most important component, the “standard of living”. Ensuring a decent standard of living depends on the level of society development quantified in the GDP and in the manner of its allocation. The impact of fiscality on the standard of living can be best perceived on the occupied population, which is taxed, the employees representing the most relevant category. This is supported by the figures on the proportion of employees within the total occupied population (over 50% in 2003 amounting to 56.04%. The analysis of the income from wages in 1990 – 2005 yielded the following conclusions: - In 1992-1994, the real gross average income decreased, while in 1994- 1996 it increased. This had no influence on the proportion of wages tax collection, which increased continuously, which increased the fiscal pressure on the work; - In 1996-2000, the real gross average income decreased dramatically due to the peak inflation of that period, which eroded all earnings; - In 2000-2004, the increase resumed, both of the real gross average income, and of the fiscal pressure on it; - The lowest fiscal pressure felt by the employees was in 1998 and 1999. This evolution shows that a fiscal relaxation was attempted in 1998 and 1999, but it was not supported by the available resources, which caused a boom of the fiscal pressure during the subsequent period.

Living standards in Black and White: evidence from the heights of Ohio Prison inmates, 1829-1913.

Science.gov (United States)

Maloney, Thomas N; Carson, Scott Alan

2008-07-01

The use of height data to measure living standards is now a well-established method in the economic history literature. Moreover, a number of core findings are widely agreed upon. There are still some populations, places, and times, however, for which anthropometric evidence remains limited. One such example is 19th century African-Americans in the Northern US. Here, we use new data from the Ohio state prison to track heights of Black and White men incarcerated between 1829 and 1913. We corroborate the well-known mid-century height decline among White men. We find that Black men were shorter than White men, throughout the century controlling for a number of characteristics. We also find a pattern of height decline among Black men in mid-century similar to that found for White men.

Applying the EBU R128 loudness standard in live-streaming sound sculptures

DEFF Research Database (Denmark)

Højlund, Marie Koldkjær; Riis, Morten S.; Rothmann, Daniel

2017-01-01

to preserve a natural sounding dynamic image from the varying sound sources that can be played back under varying conditions, an adaptation of the EBU R128 loudness measurement recommendation, originally developed for levelling non-real-time broadcast material, has been applied. The paper describes the Pure......This paper describes the development of a loudness-based compressor for live audio streams. The need for this device arose while developing the public sound art project The Overheard, which involves mixing together several live audio streams through a web based mixing interface. In order...

Development of measurement standards for verifying functional performance of surface texture measuring instruments

Energy Technology Data Exchange (ETDEWEB)

Fujii, A [Life and Industrial Product Development Department Olympus Corporation, 2951 Ishikawa-machi, Hachiouji-shi, Tokyo (Japan); Suzuki, H [Industrial Marketing and Planning Department Olympus Corporation, Shinjyuku Monolith, 3-1 Nishi-Shinjyuku 2-chome, Tokyo (Japan); Yanagi, K, E-mail: a_fujii@ot.olympus.co.jp [Department of Mechanical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka-machi, Nagaoka-shi, Niigata (Japan)

2011-08-19

A new measurement standard is proposed for verifying overall functional performance of surface texture measuring instruments. Its surface is composed of sinusoidal surface waveforms of chirp signals along horizontal cross sections of the material measure. One of the notable features is that the amplitude of each cycle in the chirp signal form is geometrically modulated so that the maximum slope is kept constant. The maximum slope of the chirp-like signal is gradually decreased according to movement in the lateral direction. We fabricated the measurement standard by FIB processing, and it was calibrated by AFM. We tried to evaluate the functional performance of Laser Scanning Microscope by this standard in terms of amplitude response with varying slope angles. As a result, it was concluded that the proposed standard can easily evaluate the performance of surface texture measuring instruments.

Isotope-dilution mass spectrometry in the measurement of plutonium isotope half-lives

International Nuclear Information System (INIS)

Abernathey, R.M.; Marsh, S.F.

1981-01-01

Isotope-dilution mass spectrometry has been used at Los Alamos to measure the half-lives of 239 Pu, 240 Pu, and 241 Pu. The latter was determined by measuring the rate of decrease of the 241 Pu/ 242 Pu ratio in an appropriate isotopic mixture over a period of several years. The half-lives of the two lighter isotopes are too long to be determined in this manner. They were determined by measuring the rate of production of the uranium daughter relative to a known added 233 U spike. Experimental procedures were designed to control sources of error and to permit a detailed statistical treatment which included all known sources of error and accounted for all covariances. The uncertainties, at the 95% confidence level, associated with the measured half-lives were less than 0.4% for 241 Pu and less than 0.2% for 239 Pu and 240 Pu

Measurement method of activation cross-sections of reactions producing short-lived nuclei with 14 MeV neutrons

CERN Document Server

Kawade, K; Kasugai, Y; Shibata, M; Iida, T; Takahashi, A; Fukahori, T

2003-01-01

We describe a method for obtaining reliable activation cross-sections in the neutron energy range between 13.4 and 14.9 MeV for the reactions producing short-lived nuclei with half-lives between 0.5 and 30 min. We noted neutron irradiation fields and measured induced activities, including (1) the contribution of scattered low-energy neutrons, (2) the fluctuation of the neutron fluence rate during the irradiation, (3) the true coincidence sum effect, (4) the random coincidence sum effect, (5) the deviation in the measuring position due to finite sample thickness, (6) the self-absorption of the gamma-ray in the sample material and (7) the interference reactions producing the same radionuclides or the ones emitting the gamma-ray with the same energy of interest. The cross-sections can be obtained within a total error of 3.6%, when good counting statistics are achieved, including an error of 3.0% for the standard cross-section of sup 2 sup 7 Al (n, alpha) sup 2 sup 4 Na. We propose here simple methods for measuri...

Development and implementation of a local government survey to measure community supports for healthy eating and active living

Directory of Open Access Journals (Sweden)

Latetia V Moore

2017-06-01

Full Text Available The ability to make healthy choices is influenced by where one lives, works, shops, and plays. Locally enacted policies and standards can influence these surroundings but little is known about the prevalence of such policies and standards that support healthier behaviors. In this paper, we describe the development of a survey questionnaire designed to capture local level policy supports for healthy eating and active living and findings and lessons learned from a 2012 pilot in two states, Minnesota and California, including respondent burden, survey sampling and administration methods, and survey item feasibility issues. A 38-item, web-based, self-administered survey and sampling frame were developed to assess the prevalence of 22 types of healthy eating and active living policies in a representative sample of local governments in the two states. The majority of respondents indicated the survey required minimal effort to complete with half taking <20 min to complete the survey. A non-response follow-up plan including emails and phone calls was required to achieve a 68% response rate (versus a 37% response rate for email only reminders. Local governments with larger residential populations reported having healthy eating and active living policies and standards more often than smaller governments. Policies that support active living were more common than those that support healthy eating and varied within the two states. The methods we developed are a feasible data collection tool for estimating the prevalence of municipal healthy eating and active living policies and standards at the state and national level.

Short Lived Fission Product Yield Measurements in 235U, 238U and 239Pu

Science.gov (United States)

Silano, Jack; Tonchev, Anton; Tornow, Werner; Krishichayan, Fnu; Finch, Sean; Gooden, Matthew; Wilhelmy, Jerry

2017-09-01

Yields of short lived fission products (FPYs) with half lives of a few minutes to an hour contain a wealth of information about the fission process. Knowledge of short lived FPYs would contribute to existing data on longer lived FPY mass and charge distributions. Of particular interest are the relative yields between the ground states and isomeric states of FPYs since these isomeric ratios can be used to determine the angular momentum of the fragments. Over the past five years, a LLNL-TUNL-LANL collaboration has made precision measurements of FPYs from quasi-monoenergetic neutron induced fission of 235U, 238U and 239Pu. These efforts focused on longer lived FPYs, using a well characterized dual fission chamber and several days of neutron beam exposure. For the first time, this established technique will be applied to measuring short lived FPYs, with half lives of minutes to less than an hour. A feasibility study will be performed using irradiation times of < 1 hour, improving the sensitivity to short lived FPYs by limiting the buildup of long lived isotopes. Results from this exploratory study will be presented, and the implications for isomeric ratio measurements will be discussed. This work was performed under the auspices of US DOE by LLNL under Contract DE-AC52-07NA27344.

A comparative study of performance measurement standards of railway operator

Directory of Open Access Journals (Sweden)

Pongjirawut Siripong

2017-01-01

Full Text Available The European standard (EN 13816, is one of the widely accepted standards for measuring the quality of public passenger transport (PPT service. EN 13816 indicates 8 measurement criteria, 29 sub-criteria and 193 Key Performance Indicators (KPIs to be used to measure the performance of railway operators. Nowadays, there are other addition criteria beyond EN13816, developed by various organisations. This research firstly aims to explore the service performance measurement of railway operators used by actual railway operators at international level and in Thailand. After an intensive review of performance measurement standards, 9 standards are compiled and compared in terms of criteria, sub-criteria and KPIs using a cluster analysis methodology. The result found additional performance measurement aspects at 2 sub-criteria and 91 KPIs in addition to EN 13816. This research summarized and compared different performance measurement standards to measure service quality of metro rail line.

Sampling and measurement of long-lived radionuclides in environmental samples

International Nuclear Information System (INIS)

Brauer, F.P.; Goles, R.W.; Kaye, J.H.; Rieck, H.G. Jr.

1977-01-01

The volatile and semivolatile long-lived man-made radionuclides 3 H, 14 C, 79 Se, 85 Kr, 99 Tc, 129 I, 135 Cs, and 137 Cs are of concern in operation of nuclear facilities because they are difficult and expensive to contain and once emitted to the environment they become permanent ecological constituents with both local and global distributions. Species-selective sampling and analytical methods (radiochemical, neutron activation, and mass spectrometric) have been developed for many of these nuclides with sensitivities well below those required for radiation protection. These sampling and analytical methods have been applied to the measurement of current environmental levels of some of the more ecologically important radionuclides. The detection and tracing of long-lived radionuclides is being conducted in order to establish base-line values and to study environmental behavior. This paper describes detection and measurement techniques and summarizes current measurement results

A general dead-time correction method based on live-time stamping. Application to the measurement of short-lived radionuclides.

Science.gov (United States)

Chauvenet, B; Bobin, C; Bouchard, J

2017-12-01

Dead-time correction formulae are established in the general case of superimposed non-homogeneous Poisson processes. Based on the same principles as conventional live-timed counting, this method exploits the additional information made available using digital signal processing systems, and especially the possibility to store the time stamps of live-time intervals. No approximation needs to be made to obtain those formulae. Estimates of the variances of corrected rates are also presented. This method is applied to the activity measurement of short-lived radionuclides. Copyright © 2017 Elsevier Ltd. All rights reserved.

Portable radiation instrumentation traceability of standards and measurements

International Nuclear Information System (INIS)

Wiserman, A.; Walke, M.

1995-01-01

Portable radiation measuring instruments are used to estimate and control doses for workers. Calibration of these instruments must be sufficiently accurate to ensure that administrative and legal dose limits are not likely to be exceeded due to measurement uncertainties. An instrument calibration and management program is established which permits measurements made with an instrument to be traced to a national standard. This paper describes the establishment and maintenance of calibration standards for gamma survey instruments and an instrument management program which achieves traceability of measurement for uniquely identified field instruments. (author)

Absolute measurement of a tritium standard

International Nuclear Information System (INIS)

Hadzisehovic, M.; Mocilnik, I.; Buraei, K.; Pongrac, S.; Milojevic, A.

1978-01-01

For the determination of a tritium absolute activity standard, a method of internal gas counting has been used. The procedure involves water reduction by uranium and zinc further the measurement of the absolute disintegration rate of tritium per unit of the effective volume of the counter by a compensation method. Criteria for the choice of methods and procedures concerning the determination and measurement of gaseous 3 H yield, parameters of gaseous hydrogen, sample mass of HTO and the absolute disintegration rate of tritium are discussed. In order to obtain gaseous sources of 3 H (and 2 H), the same reversible chemical reaction was used, namely, the water - uranium hydride - hydrogen system. This reaction was proved to be quantitative above 500 deg C by measuring the yield of the gas obtained and the absolute activity of an HTO standard. A brief description of the measuring apparatus is given, as well as a critical discussion of the brass counter quality and the possibility of obtaining equal working conditions at the counter ends. (T.G.)

Accurate mass measurements of very short-lived nuclei. Prerequisites for high-accuracy investigations of superallowed β-decays

International Nuclear Information System (INIS)

Herfurth, F.; Kellerbauer, A.; Sauvan, E.; Ames, F.; Engels, O.; Audi, G.; Lunney, D.; Beck, D.; Blaum, K.; Kluge, H.J.; Scheidenberger, C.; Sikler, G.; Weber, C.; Bollen, G.; Schwarz, S.; Moore, R.B.; Oinonen, M.

2002-01-01

Mass measurements of 34 Ar, 73-78 Kr, and 74,76 Rb were performed with the Penning-trap mass spectrometer ISOLTRAP. Very accurate Q EC -values are needed for the investigations of the Ft-value of 0 + → 0 + nuclear β-decays used to test the standard model predictions for weak interactions. The necessary accuracy on the Q EC -value requires the mass of mother and daughter nuclei to be measured with δm/m ≤ 3 . 10 -8 . For most of the measured nuclides presented here this has been reached. The 34 Ar mass has been measured with a relative accuracy of 1.1 .10 -8 . The Q EC -value of the 34 Ar 0 + → 0 + decay can now be determined with an uncertainty of about 0.01%. Furthermore, 74 Rb is the shortest-lived nuclide ever investigated in a Penning trap. (orig.)

The mortality divide in India: the differential contributions of gender, caste, and standard of living across the life course.

Science.gov (United States)

Subramanian, S V; Nandy, Shailen; Irving, Michelle; Gordon, Dave; Lambert, Helen; Davey Smith, George

2006-05-01

We investigated the contributions of gender, caste, and standard of living to inequalities in mortality across the life course in India. We conducted a multilevel cross-sectional analysis of individual mortality, using the 1998-1999 Indian National Family Health Survey data for 529321 individuals from 26 states. Substantial mortality differentials were observed between the lowest and highest standard-of-living quintiles across all age groups, ranging from an odds ratio (OR) of 4.61 (95% confidence interval [CI]=2.98, 7.13) in the age group 2 to 5 years to an OR of 1.97 (95% CI=1.68, 2.32) in the age group 45 to 64 years. Excess mortality for girls was evident only for the age group 2 to 5 years (OR=1.33, 95% CI=1.13, 1.58). Substantial caste differentials were observed at the beginning and end stages of life. Area variation in mortality is partially a result of the compositional effects of household standard of living and caste. The mortality burden, across the life course in India, falls disproportionately on economically disadvantaged and lower-caste groups. Residual state-level variation in mortality suggests an underlying ecology to the mortality divide in India.

Measurement and correction of transverse chromatic offsets for multi-wavelength retinal microscopy in the living eye.

Science.gov (United States)

Harmening, Wolf M; Tiruveedhula, Pavan; Roorda, Austin; Sincich, Lawrence C

2012-09-01

A special challenge arises when pursuing multi-wavelength imaging of retinal tissue in vivo, because the eye's optics must be used as the main focusing elements, and they introduce significant chromatic dispersion. Here we present an image-based method to measure and correct for the eye's transverse chromatic aberrations rapidly, non-invasively, and with high precision. We validate the technique against hyperacute psychophysical performance and the standard chromatic human eye model. In vivo correction of chromatic dispersion will enable confocal multi-wavelength images of the living retina to be aligned, and allow targeted chromatic stimulation of the photoreceptor mosaic to be performed accurately with sub-cellular resolution.

20 CFR 404.272 - Indexes we use to measure the rise in the cost-of-living.

Science.gov (United States)

2010-04-01

... cost-of-living. 404.272 Section 404.272 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Cost-Of-Living Increases § 404.272 Indexes we use to measure the rise in the cost-of-living. (a) The bases. To measure...

Review of measurement techniques for stack monitoring of long-lived alpha emitters

International Nuclear Information System (INIS)

Kordas, J.F.; Phelps, P.L.

1978-01-01

As a result of the promulgation of new guidelines by the Environmental Protection Agency (40 CFR 190) for releases of long-lived, alpha-emitting substances, the stack-monitoring requirements for measuring long-lived alpha particles may change in terms of both monitored isotopes and the detection levels. This paper briefly reviews stack-monitoring requirements for long-lived alpha-emitting particles. It also examines the currently deployed alpha-particulate, stack-monitoring systems and discusses prototype systems that may be applicable to stack monitoring

Search for Heavy Long-Lived Particles in ATLAS

CERN Document Server

Kajomovitz, Enrique

This thesis presents a search for long-lived particles through a measuremt of their mass performed on a data sample of \\lumi from proton-proton collisions at a centre-of-mass energy $\\sqrt{s} = 7~\\TeV$ collected by the ATLAS detector at the LHC in 2011. The mass of the long-lived particles is estimated from a measurement of their speed, $\\beta$, and their momentum measurements using the relation $m=p/\\beta\\gamma$. Two distinct types of LLPs are sought after; sleptons, the supersymmetric partners of the Standard Model leptons, and \\rhads, colorless bound states that include a colored supersymmetric long-lived particle in addition to colored Standard Model particles. Sleptons are expected to interact with the detector as if they were heavy muons, charged throughout the detector and penetrating. In contrast, \\rhads~may change charge in the detector due to the strong interactions between the light quarks in the \\rhads~with the detector material. Thus, \\rhads~may be charged in the ID and neutral in the MS or...

Measurement standards and the general problem of reference points in chemical analysis

International Nuclear Information System (INIS)

Richter, W.; Dube, G.

2002-01-01

Besides the measurement standards available in general metrology in the form of the realisations of the units of measurement, measurement standards of chemical composition are needed for the vast field of chemical measurement (measurements of the chemical composition), because it is the main aim of such measurements to quantify non-isolated substances, often in complicated matrices, to which the 'classical' measurement standards and their lower- level derivatives are not directly applicable. At present, material artefacts as well as standard measurement devices serve as chemical measurement standards. These are measurement standards in the full metrological sense only, however, if they are firmly linked to the SI unit in which the composition represented by the standard is expressed. This requirement has the consequence that only a very restricted number of really reliable chemical measurement standards exist at present. Since it is very difficult and time consuming to increase this number substantially and, on the other hand, reliable reference points are increasingly needed for all kinds of chemical measurements, primary methods of measurement and high-level reference measurements will play an increasingly important role for the establishment of worldwide comparability and hence mutual acceptance of chemical measurement results. (author)

Solution standards for quality control of nuclear-material analytical measurements

International Nuclear Information System (INIS)

Clark, J.P.

1981-01-01

Analytical chemistry measurement control depends upon reliable solution standards. At the Savannah River Plant Control Laboratory over a thousand analytical measurements are made daily for process control, product specification, accountability, and nuclear safety. Large quantities of solution standards are required for a measurement quality control program covering the many different analytical chemistry methods. Savannah River Plant produced uranium, plutonium, neptunium, and americium metals or oxides are dissolved to prepare stock solutions for working or Quality Control Standards (QCS). Because extensive analytical effort is required to characterize or confirm these solutions, they are prepared in large quantities. These stock solutions are diluted and blended with different chemicals and/or each other to synthesize QCS that match the matrices of different process streams. The target uncertainty of a standard's reference value is 10% of the limit of error of the methods used for routine measurements. Standard Reference Materials from NBS are used according to special procedures to calibrate the methods used in measuring the uranium and plutonium standards so traceability can be established. Special precautions are required to minimize the effects of temperature, radiolysis, and evaporation. Standard reference values are periodically corrected to eliminate systematic errors caused by evaporation or decay products. Measurement control is achieved by requiring analysts to analyze a blind QCS each shift a measurement system is used on plant samples. Computer evaluation determines whether or not a measurement is within the +- 3 sigma control limits. Monthly evaluations of the QCS measurements are made to determine current bias correction factors for accountability measurements and detect significant changes in the bias and precision statistics. The evaluations are also used to plan activities for improving the reliability of the analytical chemistry measurements

Predicting live weight using body measurements in Afar goats in ...

African Journals Online (AJOL)

Bheema

Predicting live weight using body measurements in Afar goats in north eastern. Ethiopia ... farmers get value for their stock rather than the middlemen. However ..... of West African long-legged and West African dwarf sheep in Northern Ghana.

The Agency's Safety Standards and Measures

International Nuclear Information System (INIS)

1976-04-01

The Agency's Health and Safety Measures were first, approved by the Board of Governors on 31 March 1960 in implementation of Articles III.A.6 and XII of the Statute of the Agency. On the basis of the experience gained from applying those measures to projects carried out by Members under agreements concluded with the Agency, the Agency's Health and Safety Measures were revised in 1975 and approved by the Board of Governors on 25 February 1976. The Agency's Safety Standards and Measures as revised are reproduced in this document for the information of all Members

A comparison of the Actigraph GT1M and GT3X accelerometers under standardized and free-living conditions

International Nuclear Information System (INIS)

Kaminsky, Leonard A; Ozemek, Cemal

2012-01-01

Prior to 2008, data collection from Actigraph accelerometers was only possible in the uniaxial mode. In 2009, Actigraph released the GT3X, which allows triaxial data collection. The purpose of this study was to determine if data collected by the GT3X in the uniaxial mode are comparable to its predecessor, the GT1M, under both standardized and free-living conditions. Thirty-four subjects (17 women and 17 men) provided complete data for this study. Subjects wore the accelerometers (one GT1M and one GT3X) on their waistband in line with the right and left anterior axillary lines. Each subject walked on a treadmill at speeds of 2.4, 3.2, 4.0, 4.8, 5.6 and 6.4 km h −1 for 5 min each, and then continued to wear both accelerometers for all waking hours for three consecutive days. Mean steady-state activity counts min –1 for both accelerometers were not statistically different for the standardized treadmill walking speeds and for mean minutes/day and activity counts/day for intensity classifications under the free-living condition. Based on comparisons made from both standardized walking speeds and free-living conditions, it is reasonable to compare data derived from either the GT1M or GT3X when collected in the uniaxial mode. (paper)

Patient-reported outcomes in adults with congenital heart disease: Inter-country variation, standard of living and healthcare system factors.

Science.gov (United States)

Moons, Philip; Kovacs, Adrienne H; Luyckx, Koen; Thomet, Corina; Budts, Werner; Enomoto, Junko; Sluman, Maayke A; Yang, Hsiao-Ling; Jackson, Jamie L; Khairy, Paul; Cook, Stephen C; Subramanyan, Raghavan; Alday, Luis; Eriksen, Katrine; Dellborg, Mikael; Berghammer, Malin; Johansson, Bengt; Mackie, Andrew S; Menahem, Samuel; Caruana, Maryanne; Veldtman, Gruschen; Soufi, Alexandra; Fernandes, Susan M; White, Kamila; Callus, Edward; Kutty, Shelby; Van Bulck, Liesbet; Apers, Silke

2018-01-15

Geographical differences in patient-reported outcomes (PROs) of adults with congenital heart disease (ConHD) have been observed, but are poorly understood. We aimed to: (1) investigate inter-country variation in PROs in adults with ConHD; (2) identify patient-related predictors of PROs; and (3) explore standard of living and healthcare system characteristics as predictors of PROs. Assessment of Patterns of Patient-Reported Outcomes in Adults with Congenital Heart disease - International Study (APPROACH-IS) was a cross-sectional, observational study, in which 4028 patients from 15 countries in 5 continents were enrolled. Self-report questionnaires were administered: patient-reported health (12-item Short Form Health Survey; EuroQOL-5D Visual Analog Scale); psychological functioning (Hospital Anxiety and Depression Scale); health behaviors (Health Behavior Scale-Congenital Heart Disease) and quality of life (Linear Analog Scale for quality of life; Satisfaction With Life Scale). A composite PRO score was calculated. Standard of living was expressed as Gross Domestic Product per capita and Human Development Index. Healthcare systems were operationalized as the total health expenditure per capita and the overall health system performance. Substantial inter-country variation in PROs was observed, with Switzerland having the highest composite PRO score (81.0) and India the lowest (71.3). Functional class, age, and unemployment status were patient-related factors that independently and consistently predicted PROs. Standard of living and healthcare system characteristics predicted PROs above and beyond patient characteristics. This international collaboration allowed us to determine that PROs in ConHD vary as a function of patient-related factors as well as the countries in which patients live. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of a standard for indoor radon measurements in Australia

International Nuclear Information System (INIS)

O'Brien, R.S.; Solomon, S.B.

1994-01-01

A standard covering methodologies for the measurement of indoor radon and radon progeny concentrations in air in Australian buildings is currently under preparation as part of a set of standards covering total indoor air quality. This paper outlines the suggested methodology for radon and discusses some of the problems associated with the development of the standard. The draft standard recommends measurement of the radon concentration in air using scintillation cells, charcoal cups and solid state nuclear track detectors, and measurement of radon progeny concentration in air using the Rolle method or the Nazaroff method. 14 refs., 1 tab

Grid-enabled measures: using Science 2.0 to standardize measures and share data.

Science.gov (United States)

Moser, Richard P; Hesse, Bradford W; Shaikh, Abdul R; Courtney, Paul; Morgan, Glen; Augustson, Erik; Kobrin, Sarah; Levin, Kerry Y; Helba, Cynthia; Garner, David; Dunn, Marsha; Coa, Kisha

2011-05-01

Scientists are taking advantage of the Internet and collaborative web technology to accelerate discovery in a massively connected, participative environment--a phenomenon referred to by some as Science 2.0. As a new way of doing science, this phenomenon has the potential to push science forward in a more efficient manner than was previously possible. The Grid-Enabled Measures (GEM) database has been conceptualized as an instantiation of Science 2.0 principles by the National Cancer Institute (NCI) with two overarching goals: (1) promote the use of standardized measures, which are tied to theoretically based constructs; and (2) facilitate the ability to share harmonized data resulting from the use of standardized measures. The first is accomplished by creating an online venue where a virtual community of researchers can collaborate together and come to consensus on measures by rating, commenting on, and viewing meta-data about the measures and associated constructs. The second is accomplished by connecting the constructs and measures to an ontological framework with data standards and common data elements such as the NCI Enterprise Vocabulary System (EVS) and the cancer Data Standards Repository (caDSR). This paper will describe the web 2.0 principles on which the GEM database is based, describe its functionality, and discuss some of the important issues involved with creating the GEM database such as the role of mutually agreed-on ontologies (i.e., knowledge categories and the relationships among these categories--for data sharing). Published by Elsevier Inc.

THE IMPACT OF PENSIONS SAVING AND EDUCATION DEFICIT ON THE LIVING STANDARDS IN ROMANIA, IN THE POST-ACTIVITY PERIOD

Directory of Open Access Journals (Sweden)

SANDRA TEODORESCU

2011-04-01

Full Text Available The present paper starts with the study on the annual pension deficit in the EU member states, elaborated by AVIVA and DELOITTE companies in 2010. The paper analyzes the impact of pensions saving and education deficit on the living standards in Romania, in the post-activity period. It comprises the following sections: an introduction to the analysis, several definitions and the calculation method employed in the above-mentioned study, comparisons between Romania and other EU members states, focusing on the pension deficit, as well as a brief overview on the pension systems in Romania. In the end of the paper, we propose a debate on good financial planning that can make the difference between poverty and a decent standard of living at the time of retirement.

Calcium measurements in living filamentous fungi expressing codon-optimized aequorin

NARCIS (Netherlands)

Nelson, G.; Kozlova-Zwinderman, O.; Collis, A.J.; Knight, M.R.; Fincham, J.R.S.; Stanger, C.P.; Renwick, A.; Hessing, J.G.M.; Punt, P.J.; Hondel, C.A.M.J.J. van den; Read, N.D.

2004-01-01

Calcium signalling is little understood in filamentous fungi largely because easy and routine methods for calcium measurement in living hyphae have previously been unavailable. We have developed the recombinant aequorin method for this purpose. High levels of aequorin expression were obtained in

First Isochronous Time-of-Flight Mass Measurements of Short-Lived Projectile Fragments in the ESR

International Nuclear Information System (INIS)

Stadlmann, J.; Geissel, H.; Hausmann, M.; Nolden, F.; Radon, T.; Schatz, H.; Scheidenberger, C.; Attallah, F.; Beckert, K.; Bosch, F.; Falch, M.; Franczak, B.; Franzke, B.; Kerscher, Th.; Klepper, O.; Kluge, H.J.; Kozhuharov, C.; Loebner, K.E.G.; Muenzenberg, G.; Novikov, Yu.N.; Steck, M.; Sun, Z.; Suemmerer, K.; Weick, H.; Wollnik, H.

2000-01-01

A new method for precise mass measurements of short-lived hot nuclei is presented. These nuclei were produced via projectile fragmentation, separated with the FRS and injected into the storage ring ESR being operated in the isochronous mode. The revolution time of the ions is measured with a time-of-flight detector sensitive to single particles. This new method allows access to exotic nuclei with half-lives in the microsecond region. First results from this novel method obtained with measurements on neutron-deficient fragments of a chromium primary beam with half-lives down to 50 ms are reported. A precision of deltam/m ≤ 5 · 10 -6 has been achieved

Challenges in standardization of blood pressure measurement at the population level.

Science.gov (United States)

Tolonen, Hanna; Koponen, Päivikki; Naska, Androniki; Männistö, Satu; Broda, Grazyna; Palosaari, Tarja; Kuulasmaa, Kari

2015-04-10

Accurate blood pressure measurements are needed in clinical practice, intervention studies and health examination surveys. Blood pressure measurements are sensitive: their accuracy can be affected by measurement environment, behaviour of the subject, measurement procedures, devices used for the measurement and the observer. To minimize errors in blood pressure measurement, a standardized measurement protocol is needed. The European Health Examination Survey (EHES) Pilot project was conducted in 2009-2012. A pilot health examination survey was conducted in 12 countries using a standardized protocol. The measurement protocols used in each survey, training provided for the measurers, measurement data, and observations during site visits were collected and evaluated to assess the level of standardization. The EHES measurement protocol for blood pressure was followed accurately in all 12 pilot surveys. Most of the surveys succeeded in organizing a quiet and comfortable measurement environment, and staff instructed survey participants appropriately before examination visits. In all surveys, blood pressure was measured three times, from the right arm in a sitting posture. The biggest variation was in the device used for the blood pressure measurement. It is possible to reach a high level of standardization for blood pressure measurements across countries and over time. A detailed, standardized measurement protocol, and adequate training and monitoring during the fieldwork and centrally organized quality assessment of the data are needed. The recent EU regulation banning the sale of mercury sphygmomanometer in European Union Member States has set new challenges for the standardization of measurement devices since the validity of oscillometric measurements is device-specific and performance of aneroid devices depends very much on calibration.

[Mobile Health: IEEE Standard for Wearable Cuffless Blood Pressure Measuring Devices].

Science.gov (United States)

Zhou, Xia; Wu, Wenli; Bao, Shudi

2015-07-01

IEEE Std 1708-2014 breaks through the traditional standards of cuff based blood pressure measuring devices and establishes a normative definition of wearable cuffless blood pressure measuring devices and the objective performance evaluation of this kind of devices. This study firstly introduces the background of the new standard. Then, the standard details will be described, and the impact of cuffless blood pressure measuring devices with the new standard on manufacturers and end users will be addressed.

The preparation of large standards for NDA measurements

International Nuclear Information System (INIS)

Guardini, S.

1991-01-01

The accuracy of a nuclear material balance determination is dependent on the reference materials used to calibrate. The calibration needs of nondestructive assay techniques differ from the needs of destructive techniques: nondestructive techniques use the reference materials more than once and can require larger masses of special nuclear material. Therefore, the expertise inherited from destructive methods is not destructive measurements. The procurement process for reference materials is expensive and complex. Careful specification of the desired attributes defines the required quality measures. A detailed procurement plan, agreed upon and documented before acquisition starts, is crucial to obtaining a set of high quality references materials. The acquisition of some recent Los Alamos standards and the Ispra PERLA (Performance Laboratory) standards are following such plans. To date, plutonium oxide standards of three burnups ranging to 2.5 kg and uranium oxide standards of four (high) enrichments ranging to 1.5 kg are in routine use for calibration, performance evaluation and training. In this paper, the authors discuss an alternative

Standardization of Laser Methods and Techniques for Vibration Measurements and Calibrations

International Nuclear Information System (INIS)

Martens, Hans-Juergen von

2010-01-01

The realization and dissemination of the SI units of motion quantities (vibration and shock) have been based on laser interferometer methods specified in international documentary standards. New and refined laser methods and techniques developed by national metrology institutes and by leading manufacturers in the past two decades have been swiftly specified as standard methods for inclusion into in the series ISO 16063 of international documentary standards. A survey of ISO Standards for the calibration of vibration and shock transducers demonstrates the extended ranges and improved accuracy (measurement uncertainty) of laser methods and techniques for vibration and shock measurements and calibrations. The first standard for the calibration of laser vibrometers by laser interferometry or by a reference accelerometer calibrated by laser interferometry (ISO 16063-41) is on the stage of a Draft International Standard (DIS) and may be issued by the end of 2010. The standard methods with refined techniques proved to achieve wider measurement ranges and smaller measurement uncertainties than that specified in the ISO Standards. The applicability of different standardized interferometer methods to vibrations at high frequencies was recently demonstrated up to 347 kHz (acceleration amplitudes up to 350 km/s 2 ). The relative deviations between the amplitude measurement results of the different interferometer methods that were applied simultaneously, differed by less than 1% in all cases.

The standardizing measures which are needed

International Nuclear Information System (INIS)

Prasse, R.

1974-01-01

1. The necessity for standardizing measures: a) for the construction of final storage sites, b) for the operation of final storage sites, c) securing the existence and warranting the safety towards intervening third parties. 2. Legislative power and the incorporation of new regulations into established law. (orig./HP) [de

ASTM International Workshop on Standards & Measurements for Tissue Engineering Scaffolds

Science.gov (United States)

Simon, Carl G.; Yaszemski, Michael J.; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A.

2016-01-01

The “Workshop on Standards & Measurements for Tissue Engineering Scaffolds” was held on May 21, 2013 in Indianapolis, IN and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active “guide” documents for educational purposes, but that few standard “test methods” or “practices” have been published. Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition and drug release from scaffolds. Discussions also highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Finally, dialogue emphasized the needs to promote the use of standards in scaffold fabrication, characterization, and commercialization and to assess the use and impact of standards in the TEMPs community. Many scaffold standard needs have been identified and focus should now turn to generating these standards to support the use of scaffolds in TEMPs. PMID:25220952

Adding delayed recall to the ADAS-cog improves measurement precision in mild Alzheimer's disease: Implications for predicting instrumental activities of daily living.

Science.gov (United States)

Lowe, Deborah A; Balsis, Steve; Benge, Jared F; Doody, Rachelle S

2015-12-01

As research increasingly focuses on preclinical stages of Alzheimer's disease (AD), instruments must be retooled to identify early cognitive markers of AD. A supplemental delayed recall subtest for the Alzheimer's Disease Assessment Scale-cognitive (ADAS-cog; Mohs, Rosen, & Davis, 1983; Rosen, Mohs, & Davis, 1984) is commonly implemented, but it is not known precisely where along the spectrum of cognitive dysfunction this subtest yields incremental information beyond what is gained from the standard ADAS-cog, or whether it can improve prediction of functional outcomes. An item response theory approach can analyze this in a psychometrically rigorous way. Seven hundred eighty-eight patients with AD or amnestic complaints or impairment completed a battery including the ADAS-cog and 2 activities of daily living measures. The delayed recall subtest slightly improved the ADAS-cog's measurement precision in the mild range of cognitive dysfunction and increased prediction of instrumental activities of daily living for individuals with subjective memory impairment. (c) 2015 APA, all rights reserved).

The Australian Commonwealth standard of measurement for absorbed radiation dose

International Nuclear Information System (INIS)

Sherlock, S.L.

1990-06-01

This report documents the absorbed dose standard for photon beams in the range from 1 to 25 MeV. Measurements of absorbed dose in graphite irradiated by a beam of cobalt-60 gamma rays from an Atomic Energy of Canada Limited (AECL) E1 Dorado 6 teletherapy unit are reported. The measurements were performed using a graphite calorimeter, which is the primary standard for absorbed dose. The measurements are used to calibrate a working standard ion chamber in terms of absorbed dose in graphite. Details of the methods, results and correction factors applied are given in Appendices. 13 refs., 6 tabs., 6 figs

Measurements of Short-Lived Fission Isomers

Science.gov (United States)

Finch, Sean; Bhike, Megha; Howell, Calvin; Krishichayan, Fnu; Tornow, Werner

2016-09-01

Fission yields of the short lived isomers 134mTe (T1 / 2 = 162 ns) and 136mXe (T1 / 2 = 2 . 95 μs) were measured for 235U and 238U. The isomers were detected by the γ rays associated with the decay of the isomeric states using high-purity germanium detectors. Fission was induced using both monoenergetic γ rays and neutrons. At TUNL's High-Intensity Gamma-ray Source (HI γS), γ rays of 9 and 11 MeV were produced . Monoenergetic 8 MeV neutrons were produced at TUNL's tandem accelerator laboratory. Both beams were pulsed to allow for precise time-gated spectroscopy of both prompt and delayed γ rays following fission. This technique offers a non-destructive probe of special nuclear materials that is sensitive to the isotopic identity of the fissile material.

Standardization of 57Co using different methods of LNMRI

International Nuclear Information System (INIS)

Rezende, E.A.; Lopes, R.T.; Silva, C.J. da; Poledna, R.; Silva, R.L. da; Tauhata, L.

2015-01-01

The activity of a 57 Co solution was determined using four LNMRI different measurement methods. The solution was standardized by live-timed anti-coincidence method and sum-peak method. The efficiency curve and standard-sample comparison methods were also used in this comparison. The results and their measurement uncertainties demonstrating the equivalence of these methods. As an additional contribution, the gamma emission probabilities of 57 Co were also determined. (author)

High-rise construction in Russia as one of the objectives of improving the management mechanism for living standards of the population

Science.gov (United States)

Sergeeva, Svetlana; Komyshova, Lyudmila; Nagibina, Natalia

2018-03-01

The article is aimed at determining the significance of solving the problem of high-rise construction in Russia as one of the tasks of improving the mechanism of managing the living standards of the population. To determine the effectiveness of measures aimed at improving the quality of life management mechanism, the expert evaluation method is used. The paper presents the measures to improve the quality of life and consequently the migration attractiveness of the region. Despite a number of actual difficulties and lack of sufficient experience, there is an interest in the development of high-rise construction. The result of the analysis of the general demographic dynamics for the last fifteen years is shown. Migration is the most mobile tool for managing short-term demographic processes; therefore, great attention should be paid to this component. Moreover, it is necessary to take into account other consequences of migration.

Standards for chemical or NDA measurements for nuclear safeguards: a review

International Nuclear Information System (INIS)

Bingham, C.D.

1978-01-01

Measurements of various materials from all parts of the fuel cycle are required to be traceable to a national measurement system, primarily through standards. The availability of the standards is discussed, for nondestructive as well as destructive chemical analysis. Needs for improved standards (reference materials) and lowered uncertainty are discussed

SU-C-12A-04: Diagnostic Imaging Research Using Decedents as a Proxy for the Living: Are Radiation Dosimetry and Tissue Property Measurements Affected by Post-Mortem Changes?

Energy Technology Data Exchange (ETDEWEB)

Sandoval, D; Heintz, P [Department of Radiology University of New Mexico School of Medicine, Albuquerque, NM (United States); Weber, W; Melo, D [Lovelace Respiratory Research Institute, Albuquerque, New Mexico (United States); Adolphi, N; Hatch, P [Radiology-Pathology Center for Forensic Imaging, University of New Mexico School of Medicine, Albuquerque, New Mexico (United States)

2014-06-01

Purpose: Radiation dose (RD) from diagnostic imaging is a growing public health concern. Implanting dosimeters is a more accurate way to assess organ dose, relative to commonly used mathematical estimations. However, performing accurate dosimetry using live subjects is hindered by patient motion and safety considerations, which limit the RD and placement of implanted dosimeters. Performing multiple scans on the same subject would be the ideal way to assess the impact of dose reduction on image quality; however, performing multiple non-standard-of-care scans on live subjects for dosimetry and image quality measurements is generally prohibited by IRB committees. Our objective is to assess whether RD and tissue property (TP) measurements in post-mortem (PM) subjects are sufficiently similar to those in live subjects to justify the use of deceased subjects in future dosimetry and image quality studies. Methods: 4 MOSFET radiation dosimeters were placed enterically in each subject (2 sedated Rhesus Macaques) to measure the RD at 4 levels (carina, lung, heart, and liver) during CT scanning. The CT protocol was performed ante-mortem (AM) and 2 and 3 hours PM. For TP analysis, additional scans were taken at 24 hours PM. To compare AM and PM TP, regions-of-interest were drawn on selected organs and the average CT density with standard deviation (in units of HU) were taken; additionally, visual comparisons of images were made at each PM interval. Results: No significant difference was observed in 8 of 9 measurements comparing AM and PM RD. Only one measurement (liver of the first subject) showed a significant difference (7% lower on PM measurement), possibly due to subject re-positioning. Initial TP visual and quantitative analyses show little to no change PM. Conclusion: Our results suggest that realistic radiation dosimetry and image quality measurements based on tissue properties can be performed reliably on recently deceased subjects.

Direct measurement of catalase activity in living cells and tissue biopsies.

Science.gov (United States)

Scaglione, Christine N; Xu, Qijin; Ramanujan, V Krishnan

2016-01-29

Spatiotemporal regulation of enzyme-substrate interactions governs the decision-making steps in biological systems. Enzymes, being functional units of every living cell, contribute to the macromolecular stability of cell survival, proliferation and hence are vital windows to unraveling the biological complexity. Experimental measurements capturing this dynamics of enzyme-substrate interactions in real time add value to this understanding. Furthermore these measurements, upon validation in realistic biological specimens such as clinical biopsies - can further improve our capability in disease diagnostics and treatment monitoring. Towards this direction, we describe here a novel, high-sensitive measurement system for measuring diffusion-limited enzyme-substrate kinetics in real time. Using catalase (enzyme) and hydrogen peroxide (substrate) as the example pair, we demonstrate that this system is capable of direct measurement of catalase activity in vitro and the measured kinetics follows the classical Michaelis-Menten reaction kinetics. We further demonstrate the system performance by measuring catalase activity in living cells and in very small amounts of liver biopsies (down to 1 μg total protein). Catalase-specific enzyme activity is demonstrated by genetic and pharmacological tools. Finally we show the clinically-relevant diagnostic capability of our system by comparing the catalase activities in liver biopsies from young and old mouse (liver and serum) samples. We discuss the potential applicability of this system in clinical diagnostics as well as in intraoperative surgical settings. Copyright © 2016 Elsevier Inc. All rights reserved.

Accurate mass measurements of short-lived isotopes with the MISTRAL rf spectrometer

CERN Document Server

Toader, C F; Borcea, C; Doubre, H; Duma, M; Jacotin, M; Henry, S; Képinski, J F; Lebée, G; Le Scornet, G; Lunney, M D; Monsanglant, C; De Saint-Simon, M; Thibault, C

1999-01-01

The MISTRAL experiment has measured its first masses at ISOLDE. Installed in May 1997, this radiofrequency transmission spectrometer is to concentrate on nuclides with particularly short half-lives. MISTRAL received its first stable beam in October and first radioactive beam in November 1997. These first tests, with a plasma ion source, resulted in excellent isobaric separation and reasonable transmission. Further testing and development enabled first data taking in July 1998 on neutron-rich Na isotopes having half-lives as short as 31 ms.

Design and Implementation of a Prototype with a Standardized Interface for Transducers in Ambient Assisted Living

Directory of Open Access Journals (Sweden)

Enrique Dorronzoro

2015-01-01

Full Text Available Solutions in the field of Ambient Assisted Living (AAL do not generally use standards to implement a communication interface between sensors and actuators. This makes these applications isolated solutions because it is so difficult to integrate them into new or existing systems. The objective of this research was to design and implement a prototype with a standardized interface for sensors and actuators to facilitate the integration of different solutions in the field of AAL. Our work is based on the roadmap defined by AALIANCE, using motes with TinyOS telosb, 6LoWPAN, sensors, and the IEEE 21451 standard protocol. This prototype allows one to upgrade sensors to a smart status for easy integration with new applications and already existing ones. The prototype has been evaluated for autonomy and performance. As a use case, the prototype has been tested in a serious game previously designed for people with mobility problems, and its advantages and disadvantages have been analysed.

The PROMIS Physical Function item bank was calibrated to a standardized metric and shown to improve measurement efficiency.

Science.gov (United States)

Rose, Matthias; Bjorner, Jakob B; Gandek, Barbara; Bruce, Bonnie; Fries, James F; Ware, John E

2014-05-01

To document the development and psychometric evaluation of the Patient-Reported Outcomes Measurement Information System (PROMIS) Physical Function (PF) item bank and static instruments. The items were evaluated using qualitative and quantitative methods. A total of 16,065 adults answered item subsets (n>2,200/item) on the Internet, with oversampling of the chronically ill. Classical test and item response theory methods were used to evaluate 149 PROMIS PF items plus 10 Short Form-36 and 20 Health Assessment Questionnaire-Disability Index items. A graded response model was used to estimate item parameters, which were normed to a mean of 50 (standard deviation [SD]=10) in a US general population sample. The final bank consists of 124 PROMIS items covering upper, central, and lower extremity functions and instrumental activities of daily living. In simulations, a 10-item computerized adaptive test (CAT) eliminated floor and decreased ceiling effects, achieving higher measurement precision than any comparable length static tool across four SDs of the measurement range. Improved psychometric properties were transferred to the CAT's superior ability to identify differences between age and disease groups. The item bank provides a common metric and can improve the measurement of PF by facilitating the standardization of patient-reported outcome measures and implementation of CATs for more efficient PF assessments over a larger range. Copyright © 2014. Published by Elsevier Inc.

Comparing the lived experience to objective measures of Accessibility

OpenAIRE

Angela Curl; John Nelson; Jillian Anable

2011-01-01

This paper presents work undertaken to date as part of PhD research into the process of Accessibility Planning in the UK and how existing objective measures of accessibility relate to individual perceptions or the "lived experience" of accessibility. Since 1997, Accessibility has been framed in the social exclusion context within UK transport planning and policy, focusing on the ability of people to participate fully in society, which is seen as being limited by poor accessibility. This appro...

Measurement of microchannel fluidic resistance with a standard voltage meter

International Nuclear Information System (INIS)

Godwin, Leah A.; Deal, Kennon S.; Hoepfner, Lauren D.; Jackson, Louis A.; Easley, Christopher J.

2013-01-01

Highlights: ► Standard voltage meter used to measure fluidic resistance. ► Manual measurement takes a few seconds, akin to electrical resistance measurements. ► Measurement error is reduced compared to other approaches. ► Amenable to dynamic measurement of fluidic resistance. - Abstract: A simplified method for measuring the fluidic resistance (R fluidic ) of microfluidic channels is presented, in which the electrical resistance (R elec ) of a channel filled with a conductivity standard solution can be measured and directly correlated to R fluidic using a simple equation. Although a slight correction factor could be applied in this system to improve accuracy, results showed that a standard voltage meter could be used without calibration to determine R fluidic to within 12% error. Results accurate to within 2% were obtained when a geometric correction factor was applied using these particular channels. When compared to standard flow rate measurements, such as meniscus tracking in outlet tubing, this approach provided a more straightforward alternative and resulted in lower measurement error. The method was validated using 9 different fluidic resistance values (from ∼40 to 600 kPa s mm −3 ) and over 30 separately fabricated microfluidic devices. Furthermore, since the method is analogous to resistance measurements with a voltage meter in electrical circuits, dynamic R fluidic measurements were possible in more complex microfluidic designs. Microchannel R elec was shown to dynamically mimic pressure waveforms applied to a membrane in a variable microfluidic resistor. The variable resistor was then used to dynamically control aqueous-in-oil droplet sizes and spacing, providing a unique and convenient control system for droplet-generating devices. This conductivity-based method for fluidic resistance measurement is thus a useful tool for static or real-time characterization of microfluidic systems.

Standard deviation of scatterometer measurements from space.

Science.gov (United States)

Fischer, R. E.

1972-01-01

The standard deviation of scatterometer measurements has been derived under assumptions applicable to spaceborne scatterometers. Numerical results are presented which show that, with sufficiently long integration times, input signal-to-noise ratios below unity do not cause excessive degradation of measurement accuracy. The effects on measurement accuracy due to varying integration times and changing the ratio of signal bandwidth to IF filter-noise bandwidth are also plotted. The results of the analysis may resolve a controversy by showing that in fact statistically useful scatterometer measurements can be made from space using a 20-W transmitter, such as will be used on the S-193 experiment for Skylab-A.

Establishment and application of standard devices for radioactivity measurement

International Nuclear Information System (INIS)

Zhou Changgui; Li Xingyuan; Chen Zigen

1991-03-01

In order to establish the radioactivity measurement standards a 4πβ-γ coincidence apparatus and a 4πγ ionization chamber have been installed in the laboratory. The 4πβ-γ coincidence apparatus is for absolute measurement, and its uncertainty is ±(0.3∼5)%. The 4πγ ionization chamber is for working standard, and its uncertainty is ±(1∼5)%. The combination of these devices can meet the quality requirements controlled by National Verification System in the transfer of radioactivity values

ASTM international workshop on standards and measurements for tissue engineering scaffolds.

Science.gov (United States)

Simon, Carl G; Yaszemski, Michael J; Ratcliffe, Anthony; Tomlins, Paul; Luginbuehl, Reto; Tesk, John A

2015-07-01

The "Workshop on Standards & Measurements for Tissue Engineering Scaffolds" was held on May 21, 2013 in Indianapolis, IN, and was sponsored by the ASTM International (ASTM). The purpose of the workshop was to identify the highest priority items for future standards work for scaffolds used in the development and manufacture of tissue engineered medical products (TEMPs). Eighteen speakers and 78 attendees met to assess current scaffold standards and to prioritize needs for future standards. A key finding was that the ASTM TEMPs subcommittees (F04.41-46) have many active "guide" documents for educational purposes, but few standard "test methods" or "practices." Overwhelmingly, the most clearly identified need was standards for measuring the structure of scaffolds, followed by standards for biological characterization, including in vitro testing, animal models and cell-material interactions. The third most pressing need was to develop standards for assessing the mechanical properties of scaffolds. Additional needs included standards for assessing scaffold degradation, clinical outcomes with scaffolds, effects of sterilization on scaffolds, scaffold composition, and drug release from scaffolds. Discussions highlighted the need for additional scaffold reference materials and the need to use them for measurement traceability. Workshop participants emphasized the need to promote the use of standards in scaffold fabrication, characterization, and commercialization. Finally, participants noted that standards would be more broadly accepted if their impact in the TEMPs community could be quantified. Many scaffold standard needs have been identified and focus is turning to generating these standards to support the use of scaffolds in TEMPs. © 2014 Wiley Periodicals, Inc.

Positive psychology outcome measures for family caregivers of people living with dementia: a systematic review.

Science.gov (United States)

Stansfeld, Jacki; Stoner, Charlotte R; Wenborn, Jennifer; Vernooij-Dassen, Myrra; Moniz-Cook, Esme; Orrell, Martin

2017-08-01

Family caregivers of people living with dementia can have both positive and negative experiences of caregiving. Despite this, existing outcome measures predominately focus on negative aspects of caregiving such as burden and depression. This review aimed to evaluate the development and psychometric properties of existing positive psychology measures for family caregivers of people living with dementia to determine their potential utility in research and practice. A systematic review of positive psychology outcome measures for family caregivers of people with dementia was conducted. The databases searched were as follows: PsychINFO, CINAHL, MEDLINE, EMBASE, and PubMed. Scale development papers were subject to a quality assessment to appraise psychometric properties. Twelve positive outcome measures and six validation papers of these scales were identified. The emerging constructs of self-efficacy, spirituality, resilience, rewards, gain, and meaning are in line with positive psychology theory. There are some robust positive measures in existence for family caregivers of people living with dementia. However, lack of reporting of the psychometric properties hindered the quality assessment of some outcome measures identified in this review. Future research should aim to include positive outcome measures in interventional research to facilitate a greater understanding of the positive aspects of caregiving and how these contribute to well-being.

— study of the use of two standard- and non-standard-measuring devices

Directory of Open Access Journals (Sweden)

Paweł Ostapkowicz

2014-03-01

Full Text Available This paper deals with leak detection in liquid transmission pipelines. Diagnostic method based on negative pressure wave detection is taken into account here. The paper focuses on variant of this method, related to the use of only two measurement points (devices, placed at the inlet and outlet of the pipeline. Standard transducers for measurement of pressure signals and non-standard elaborated technique for measurement of new diagnostic signals were used. New diagnostic signals, conventionally named the signals of weak interactions, result from the work of special devices (correctors joined to the pipeline. In order to compare both hardware solutions key performance attributes for the analyzed leak detection method were determined. The bases of such assessment were experimental tests. They were conducted with the use of a physical model of a pipeline. The pipeline was 380 meters long, 34 mm in internal diameter and made of polyethylene (PEHD pipes. The medium pumped through the pipeline was water. Carrying out such research, diagnostic procedures elaborated by the author were used and tested.[b]Keywords[/b]: technical diagnostics, pipelines, leak detection

Three-dimensional hindfoot alignment measurements based on biplanar radiographs: comparison with standard radiographic measurements

International Nuclear Information System (INIS)

Sutter, Reto; Pfirrmann, Christian W.A.; Buck, Florian M.; Espinosa, Norman

2013-01-01

To establish a hindfoot alignment measurement technique based on low-dose biplanar radiographs and compare with hindfoot alignment measurements on long axial view radiographs, which is the current reference standard. Long axial view radiographs and low-dose biplanar radiographs of a phantom consisting of a human foot skeleton embedded in acrylic glass (phantom A) and a plastic model of a human foot in three different hindfoot positions (phantoms B1-B3) were imaged in different foot positions (20 internal to 20 external rotation). Two independent readers measured hindfoot alignment on long axial view radiographs and performed 3D hindfoot alignment measurements based on biplanar radiographs on two different occasions. Time for three-dimensional (3D) measurements was determined. Intraclass correlation coefficients (ICC) were calculated. Hindfoot alignment measurements on long axial view radiographs were characterized by a large positional variation, with a range of 14 /13 valgus to 22 /27 varus (reader 1/2 for phantom A), whereas the range of 3D hindfoot alignment measurements was 7.3 /6.0 to 9.0 /10.5 varus (reader 1/2 for phantom A), with a mean and standard deviation of 8.1 ± 0.6/8.7 ± 1.4 respectively. Interobserver agreement was high (ICC = 0.926 for phantom A, and ICC = 0.886 for phantoms B1-B3), and agreement between different readouts was high (ICC = 0.895-0.995 for reader 1, and ICC = 0.987-0.994 for reader 2) for 3D measurements. Mean duration of 3D measurements was 84 ± 15/113 ± 15 s for reader 1/2. Three-dimensional hindfoot alignment measurements based on biplanar radiographs were independent of foot positioning during image acquisition and reader independent. In this phantom study, the 3D measurements were substantially more precise than the standard radiographic measurements. (orig.)

Growth and relationship of live weight to body measurements in semi-domesticated reindeer (Rangifer tarandus tarandus L.

Directory of Open Access Journals (Sweden)

Mauri Nieminen

1990-09-01

Full Text Available Estimation of live weight from measurements of body dimensions is useful in many management activities with domestic animals. In present study live weight was measured from 2932 female and 1037 male semi-domesticated reindeer (Rangifer tarandus tarandus L. during different seasons in 1969-85. The age of reindeer varied between 1 day and 14 yrs. Back length (along back from second spinous process to base of tail and chest girth (just behind front legs were taken also from 1490 female and 510 male reindeer. The growth of reindeer from birth to adulthood was cumulative consisting of a rapid weight accretion during summers followed by a weight loss or stasis during winters. The mathematical analyses of the growth based on exponential solutions gave average values for growth of female and male reindeer. Body weight of females increased until the age of 4.5 yrs and that of males until the age of 5.5 yrs. During winter and spring body weight of hinds decreased 10 to 15 kg and that of stags 30 to 50 kg in different age groups. Significant linear regressions were found between live weight and back length (r = 0.809 and 0.892, live weight and chest girth (r = 0.860 and 0.872 and live weight and combined body measure (back length + chest girth (r = 0.877 and 0.941 and live weight and body volume (r = 0.905 and 0.954, respectively in female and male reindeer. Exponential regressions gave, however, the best estimations of live weight with combined body measure.

Experience with local lymph node assay performance standards using standard radioactivity and nonradioactive cell count measurements.

Science.gov (United States)

Basketter, David; Kolle, Susanne N; Schrage, Arnhild; Honarvar, Naveed; Gamer, Armin O; van Ravenzwaay, Bennard; Landsiedel, Robert

2012-08-01

The local lymph node assay (LLNA) is the preferred test for identification of skin-sensitizing substances by measuring radioactive thymidine incorporation into the lymph node. To facilitate acceptance of nonradioactive variants, validation authorities have published harmonized minimum performance standards (PS) that the alternative endpoint assay must meet. In the present work, these standards were applied to a variant of the LLNA based on lymph node cell counts (LNCC) run in parallel as a control with the standard LLNA with radioactivity measurements, with threshold concentrations (EC3) being determined for the sensitizers. Of the 22 PS chemicals tested in this study, 21 yielded the same results from standard radioactivity and cell count measurements; only 2-mercaptobenzothiazole was positive by LLNA but negative by LNCC. Of the 16 PS positives, 15 were positive by LLNA and 14 by LNCC; methylmethacrylate was not identified as sensitizer by either of the measurements. Two of the six PS negatives tested negative in our study by both LLNA and LNCC. Of the four PS negatives which were positive in our study, chlorobenzene and methyl salicylate were tested at higher concentrations than the published PS, whereas the corresponding concentrations resulted in consistent negative results. Methylmethacrylate and nickel chloride tested positive within the concentration range used for the published PS. The results indicate cell counts and radioactive measurements are in good accordance within the same LLNA using the 22 PS test substances. Comparisons with the published PS results may, however, require balanced analysis rather than a simple checklist approach. Copyright © 2011 John Wiley & Sons, Ltd.

Life quality and living standards in big cities under conditions of high-rise construction development

Science.gov (United States)

Avdeeva, Elena; Averina, Tatiana; Kochetova, Larisa

2018-03-01

Modern urbanization processes occurring on a global scale inevitably lead to an increase in population density in large cities. People assess the state of life quality and living standards of megalopolises under conditions of high-rise construction development ambiguously. Using SWOT analysis, the authors distinguished positive and negative aspects of high-rise construction, highlighted threats to its development and its opportunities. The article considers the model of development of the city's industry and infrastructure, which enables determining the optimal volume of production by sectors and branches of city economy in order to increase its innovative, production and economic potential and business activity.

A technique for the measurement of electron attachment to short-lived excited species

International Nuclear Information System (INIS)

Christophorou, L.G.; Pinnaduwage, L.A.; Bitouni, A.P.

1990-01-01

A technique is described for the measurement of electron attachment to short-lived (approx-lt 10 -9 s) excited species. Preliminary results are presented for photoenhanced electron attachment to short-lived electronically-excited states of triethylamine molecules produced by laser two-photon excitation. The attachment cross sections for these excited states are estimated to be >10 -11 cm 2 and are ∼10 7 larger compared to those for the unexcited (ground-state) molecules. 8 refs., 4 figs

Measuring the activity of BioBrick promoters using an in vivo reference standard

Directory of Open Access Journals (Sweden)

Kelly Jason R

2009-03-01

Full Text Available Abstract Background The engineering of many-component, synthetic biological systems is being made easier by the development of collections of reusable, standard biological parts. However, the complexity of biology makes it difficult to predict the extent to which such efforts will succeed. As a first practical example, the Registry of Standard Biological Parts started at MIT now maintains and distributes thousands of BioBrick™ standard biological parts. However, BioBrick parts are only standardized in terms of how individual parts are physically assembled into multi-component systems, and most parts remain uncharacterized. Standardized tools, techniques, and units of measurement are needed to facilitate the characterization and reuse of parts by independent researchers across many laboratories. Results We found that the absolute activity of BioBrick promoters varies across experimental conditions and measurement instruments. We choose one promoter (BBa_J23101 to serve as an in vivo reference standard for promoter activity. We demonstrated that, by measuring the activity of promoters relative to BBa_J23101, we could reduce variation in reported promoter activity due to differences in test conditions and measurement instruments by ~50%. We defined a Relative Promoter Unit (RPU in order to report promoter characterization data in compatible units and developed a measurement kit so that researchers might more easily adopt RPU as a standard unit for reporting promoter activity. We distributed a set of test promoters to multiple labs and found good agreement in the reported relative activities of promoters so measured. We also characterized the relative activities of a reference collection of BioBrick promoters in order to further support adoption of RPU-based measurement standards. Conclusion Relative activity measurements based on an in vivoreference standard enables improved measurement of promoter activity given variation in measurement

Direct measurement of catalase activity in living cells and tissue biopsies

International Nuclear Information System (INIS)

Scaglione, Christine N.; Xu, Qijin; Ramanujan, V. Krishnan

2016-01-01

Spatiotemporal regulation of enzyme-substrate interactions governs the decision-making steps in biological systems. Enzymes, being functional units of every living cell, contribute to the macromolecular stability of cell survival, proliferation and hence are vital windows to unraveling the biological complexity. Experimental measurements capturing this dynamics of enzyme-substrate interactions in real time add value to this understanding. Furthermore these measurements, upon validation in realistic biological specimens such as clinical biopsies – can further improve our capability in disease diagnostics and treatment monitoring. Towards this direction, we describe here a novel, high-sensitive measurement system for measuring diffusion-limited enzyme-substrate kinetics in real time. Using catalase (enzyme) and hydrogen peroxide (substrate) as the example pair, we demonstrate that this system is capable of direct measurement of catalase activity in vitro and the measured kinetics follows the classical Michaelis-Menten reaction kinetics. We further demonstrate the system performance by measuring catalase activity in living cells and in very small amounts of liver biopsies (down to 1 μg total protein). Catalase-specific enzyme activity is demonstrated by genetic and pharmacological tools. Finally we show the clinically-relevant diagnostic capability of our system by comparing the catalase activities in liver biopsies from young and old mouse (liver and serum) samples. We discuss the potential applicability of this system in clinical diagnostics as well as in intraoperative surgical settings. - Highlights: • A novel, direct measurement of Catalase enzyme activity via, oxygen sensing method. • Steady-stateprofiles of Catalase activity follow the Michaelis-Menten Kinetics. • Catalase-specific activity demonstrated using genetic and pharmacological tools. • Overcomes limitations of spectroscopic methods and indirect calorimetric approaches. • Clear

Direct measurement of catalase activity in living cells and tissue biopsies

Energy Technology Data Exchange (ETDEWEB)

Scaglione, Christine N.; Xu, Qijin; Ramanujan, V. Krishnan, E-mail: Ramanujanv@csmc.edu

2016-01-29

Spatiotemporal regulation of enzyme-substrate interactions governs the decision-making steps in biological systems. Enzymes, being functional units of every living cell, contribute to the macromolecular stability of cell survival, proliferation and hence are vital windows to unraveling the biological complexity. Experimental measurements capturing this dynamics of enzyme-substrate interactions in real time add value to this understanding. Furthermore these measurements, upon validation in realistic biological specimens such as clinical biopsies – can further improve our capability in disease diagnostics and treatment monitoring. Towards this direction, we describe here a novel, high-sensitive measurement system for measuring diffusion-limited enzyme-substrate kinetics in real time. Using catalase (enzyme) and hydrogen peroxide (substrate) as the example pair, we demonstrate that this system is capable of direct measurement of catalase activity in vitro and the measured kinetics follows the classical Michaelis-Menten reaction kinetics. We further demonstrate the system performance by measuring catalase activity in living cells and in very small amounts of liver biopsies (down to 1 μg total protein). Catalase-specific enzyme activity is demonstrated by genetic and pharmacological tools. Finally we show the clinically-relevant diagnostic capability of our system by comparing the catalase activities in liver biopsies from young and old mouse (liver and serum) samples. We discuss the potential applicability of this system in clinical diagnostics as well as in intraoperative surgical settings. - Highlights: • A novel, direct measurement of Catalase enzyme activity via, oxygen sensing method. • Steady-stateprofiles of Catalase activity follow the Michaelis-Menten Kinetics. • Catalase-specific activity demonstrated using genetic and pharmacological tools. • Overcomes limitations of spectroscopic methods and indirect calorimetric approaches. • Clear

Precision analysis for standard deviation measurements of immobile single fluorescent molecule images.

Science.gov (United States)

DeSantis, Michael C; DeCenzo, Shawn H; Li, Je-Luen; Wang, Y M

2010-03-29

Standard deviation measurements of intensity profiles of stationary single fluorescent molecules are useful for studying axial localization, molecular orientation, and a fluorescence imaging system's spatial resolution. Here we report on the analysis of the precision of standard deviation measurements of intensity profiles of single fluorescent molecules imaged using an EMCCD camera.We have developed an analytical expression for the standard deviation measurement error of a single image which is a function of the total number of detected photons, the background photon noise, and the camera pixel size. The theoretical results agree well with the experimental, simulation, and numerical integration results. Using this expression, we show that single-molecule standard deviation measurements offer nanometer precision for a large range of experimental parameters.

Vitamin D measurement standardization: The way out of the chaos.

Science.gov (United States)

Binkley, N; Dawson-Hughes, B; Durazo-Arvizu, R; Thamm, M; Tian, L; Merkel, J M; Jones, J C; Carter, G D; Sempos, C T

2017-10-01

Substantial variability is associated with laboratory measurement of serum total 25-hydroxyvitamin D [25(OH)D]. The resulting chaos impedes development of consensus 25(OH)D values to define stages of vitamin D status. As resolving this situation requires standardized measurement of 25(OH)D, the Vitamin D Standardization Program (VDSP) developed methodology to standardize 25(OH)D measurement to the gold standard reference measurement procedures of NIST, Ghent University and CDC. Importantly, VDSP developed protocols for standardizing 25(OH)D values from prior research based on availability of stored serum samples. The effect of such retrospective standardization on prevalence of "low" vitamin D status in national studies reported here for The Third National Health and Nutrition Examination Survey (NHANES III, 1988-1994) and the German Health Interview and Examination Survey for Children and Adolescents (KIGGS, 2003-2006) was such that in NHANES III 25(OH)D values were lower than original values while higher in KIGGS. In NHANES III the percentage with values below 30, 50 and 75 nmol/L increased from 4% to 6%, 22% to 31% and 55% to 71%, respectively. Whereas in KIGGS after standardization the percentage below 30, 50, and 70 nmol/L decreased from 28% to 13%, 64% to 47% and 87% to 85% respectively. Moreover, in a hypothetical example, depending on whether the 25(OH)D assay was positively or negatively biased by 12%, the 25(OH)D concentration which maximally suppressed PTH could vary from 20 to 35ng/mL. These examples underscore the challenges (perhaps impossibility) of developing vitamin D guidelines using unstandardized 25(OH)D data. Retrospective 25(OH)D standardization can be applied to old studies where stored serum samples exist. As a way forward, we suggest an international effort to identify key prior studies with stored samples for re-analysis and standardization initially to define the 25(OH)D level associated with vitamin D deficiency (rickets

Development of departmental standard for traceability of measured activity for 131I therapy capsules used in nuclear medicine

International Nuclear Information System (INIS)

Ravichandran, Ramamoorthy; Binukumar, J.P.

2011-01-01

International Basic Safety Standards (International Atomic Energy Agency, IAEA) provide guidance levels for diagnostic procedures in nuclear medicine indicating the maximum usual activity for various diagnostic tests in terms of activities of injected radioactive formulations. An accuracy of ± 10% in the activities of administered radio-pharmaceuticals is being recommended, for expected outcome in diagnostic and therapeutic nuclear medicine procedures. It is recommended that the long-term stability of isotope calibrators used in nuclear medicine is to be checked periodically for their performance using a long-lived check source, such as 137 Cs, of suitable activity. In view of the un-availability of such a radioactive source, we tried to develop methods to maintain traceability of these instruments, for certifying measured activities for human use. Two re-entrant chambers ((HDR 1000 and Selectron Source Dosimetry System (SSDS)) with 125 I and 192 Ir calibration factors in the Department of Radiotherapy were used to measure Iodine-131 ( 131 I) therapy capsules to establish traceability to Mark V isotope calibrator of the Department of Nuclear Medicine. Special nylon jigs were fabricated to keep 131 I capsule holder in position. Measured activities in all the chambers showed good agreement. The accuracy of SSDS chamber in measuring 192 Ir activities in the last 5 years was within 0.5%, validating its role as departmental standard for measuring activity. The above method is adopted because mean energies of 131 I and 192 Ir are comparable. (author)

A spectroscopic transfer standard for accurate atmospheric CO measurements

Science.gov (United States)

Nwaboh, Javis A.; Li, Gang; Serdyukov, Anton; Werhahn, Olav; Ebert, Volker

2016-04-01

Atmospheric carbon monoxide (CO) is a precursor of essential climate variables and has an indirect effect for enhancing global warming. Accurate and reliable measurements of atmospheric CO concentration are becoming indispensable. WMO-GAW reports states a compatibility goal of ±2 ppb for atmospheric CO concentration measurements. Therefore, the EMRP-HIGHGAS (European metrology research program - high-impact greenhouse gases) project aims at developing spectroscopic transfer standards for CO concentration measurements to meet this goal. A spectroscopic transfer standard would provide results that are directly traceable to the SI, can be very useful for calibration of devices operating in the field, and could complement classical gas standards in the field where calibration gas mixtures in bottles often are not accurate, available or stable enough [1][2]. Here, we present our new direct tunable diode laser absorption spectroscopy (dTDLAS) sensor capable of performing absolute ("calibration free") CO concentration measurements, and being operated as a spectroscopic transfer standard. To achieve the compatibility goal stated by WMO for CO concentration measurements and ensure the traceability of the final concentration results, traceable spectral line data especially line intensities with appropriate uncertainties are needed. Therefore, we utilize our new high-resolution Fourier-transform infrared (FTIR) spectroscopy CO line data for the 2-0 band, with significantly reduced uncertainties, for the dTDLAS data evaluation. Further, we demonstrate the capability of our sensor for atmospheric CO measurements, discuss uncertainty calculation following the guide to the expression of uncertainty in measurement (GUM) principles and show that CO concentrations derived using the sensor, based on the TILSAM (traceable infrared laser spectroscopic amount fraction measurement) method, are in excellent agreement with gravimetric values. Acknowledgement Parts of this work have been

Performance Measurement of Management System Standards Using the Balanced Scorecard

Directory of Open Access Journals (Sweden)

Jan Kopia

2017-11-01

Full Text Available Management system standards (MSS, such as ISO standards, TQM, etc. are widely-used standards adopted by millions of organizations worldwide. It is still an unclear question whether these standards are beneficial for an organization, besides the fact that they might be required or expected by law or customers. The question, whether MSS increase the efficiency, the output, or the performance of an organization is still discussed in scientific research. One reason might be that performance measurement itself is not fully understood or in constant development ranging from pure financial evaluations over intellectual capital rating to calculating of levels of environmental, social or economic expectations known as the Trible Bottom Line. The Balanced Scorecard is one possible solution for performance measurement on a strategic and operational level and therefore useful for the measurement of the influence of MSS within organizations. This study summarized current research in the field of performance measurement in the context of MSS and IMS and the use of BSC and quantitatively and qualitatively tests the usefulness of BSC in measuring the effect of MSSs using the Execution Premium. It was found that BSC is often used, that an average number of companies integrate their measurement initiatives of their MSSs into the BSC-process, and that a high integration of MSS into the BSC improves the organizational performance. This research is useful for researchers and practitioners in order to understand the benefits of the usage of the BSC in the context of MSS or Integrated Management Systems.

Accelerator mass spectrometry for measurement of long-lived radioisotopes.

Science.gov (United States)

Elmore, D; Phillips, F M

1987-05-01

Particle accelerators, such as those built for research in nuclear physics, can also be used together with magnetic and electrostatic mass analyzers to measure rare isotopes at very low abundance ratios. All molecular ions can be eliminated when accelerated to energies of millions of electron volts. Some atomic isobars can be eliminated with the use of negative ions; others can be separated at high energies by measuring their rate of energy loss in a detector. The long-lived radioisotopes (10)Be, (14)C,(26)A1, 36Cl, and (129)1 can now be measured in small natural samples having isotopic abundances in the range 10(-12) to 10(- 5) and as few as 10(5) atoms. In the past few years, research applications of accelerator mass spectrometry have been concentrated in the earth sciences (climatology, cosmochemistry, environmental chemistry, geochronology, glaciology, hydrology, igneous petrogenesis, minerals exploration, sedimentology, and volcanology), in anthropology and archeology (radiocarbon dating), and in physics (searches for exotic particles and measurement of halflives). In addition, accelerator mass spectrometry may become an important tool for the materials and biological sciences.

Measuring quality of life among people living with HIV: a systematic review of reviews.

Science.gov (United States)

Cooper, Vanessa; Clatworthy, Jane; Harding, Richard; Whetham, Jennifer

2017-11-15

A systematic review of reviews was conducted to identify and appraise brief measures of health-related quality of life (HRQoL) that have been used in peer-reviewed research with people living with HIV. The review was conducted in two stages: 1) search of electronic databases to identify systematic reviews of tools used to measure HRQoL in adults living with HIV, published since the year 2000; 2) selection of HRQol scales from those identified in the reviews. Inclusion criteria included scales that could be self-administered in 10 min or less, covering at least 3 domains of quality of life (physical function, social/role function and mental/emotional function). For generic scales, inclusion criteria included the availability of normative data while for HIV-specific scales, patient input into the development of the scale was required. Ten reviews met the inclusion criteria. Nine generic scales met the inclusion criteria: the EuroQol five dimensions questionnaire (EQ-5D); Health Utilities Index; McGill Quality of Life questionnaire; Medical Outcomes Study (MOS) Short Form (SF)-12; SF-36; World Health Organisation Quality of Life (WHOQOL- BREF), Questions of Life Satisfaction (FLZM) and SF-20. Available psychometric data supported the EQ-5D and SF-36. Seven HIV-specific scales met the inclusion criteria: the AIDS Clinical Trials Group (ACTG)-21; HIV-QL-31; MOS-HIV; Multidimensional Quality of Life Questionnaire for Persons with HIV/AIDS (MQOL-HIV), PROQOL-HIV, Symptom Quality of Life Adherence (HIV-SQUAD) and the WHOQOL-HIV BREF. Of the HIV -specific measures, the MOS-HIV was considered to have the most well-established psychometric properties, however limitations identified in the reviews included insufficient input from people living with HIV in the development of the scale, cross-cultural relevance and continued applicability. Two relatively new measures, the WHOQOL-HIV BREF and PROQOL-HIV, were considered to have promising psychometric properties and may have

ATLAS Standard Model Measurements Using Jet Grooming and Substructure

CERN Document Server

Ucchielli, Giulia; The ATLAS collaboration

2017-01-01

Boosted topologies allow to explore Standard Model processes in kinematical regimes never tested before. In such LHC challenging environments, standard reconstruction techniques quickly hit the wall. Targeting hadronic final states means to properly reconstruct energy and multiplicity of the jets in the event. In order to be able to identify the decay product of boosted objects, i.e. W bosons, $t\\bar{t}$ pairs or Higgs produced in association with $t\\bar{t}$ pairs, ATLAS experiment is currently exploiting several algorithms using jet grooming and jet substructure. This contribution will mainly cover the following ATLAS measurements: $t\\bar{t}$ differential cross section production and jet mass using the soft drop procedure. Standard Model measurements offer the perfect field to test the performances of new jet tagging techniques which will become even more important in the search for new physics in highly boosted topologies.”

New measurements of G using the measurement standards laboratory torsion balance

International Nuclear Information System (INIS)

Armstrong, T.R.; Fitzgerald, M.P.

2003-01-01

This Letter presents the results of a series of measurements of the Newtonian gravitational constant G using the compensated torsion balance developed at the Measurement Standards Laboratory. Since our last published result using the torsion balance in the compensated mode of operation [Meas. Sci. Technol. 10, 439 (1999)], several improvements have been made to reduce the uncertainty in the final result. The new measurements have used both stainless steel and copper large masses. The values of G for the two sets of masses are in good agreement. After combining all of the measurements we get a value of G=6.673 87(0.000 27)x10 -11 m 3 kg -1 s -2 . This new value is 5 parts in 10 5 smaller than our previous published values

Puerto Rican understandings of child disability: methods for the cultural validation of standardized measures of child health.

Science.gov (United States)

Gannotti, Mary E; Handwerker, W Penn

2002-12-01

Validating the cultural context of health is important for obtaining accurate and useful information from standardized measures of child health adapted for cross-cultural applications. This paper describes the application of ethnographic triangulation for cultural validation of a measure of childhood disability, the Pediatric Evaluation of Disability Inventory (PEDI) for use with children living in Puerto Rico. The key concepts include macro-level forces such as geography, demography, and economics, specific activities children performed and their key social interactions, beliefs, attitudes, emotions, and patterns of behavior surrounding independence in children and childhood disability, as well as the definition of childhood disability. Methods utilize principal components analysis to establish the validity of cultural concepts and multiple regression analysis to identify intracultural variation. Findings suggest culturally specific modifications to the PEDI, provide contextual information for informed interpretation of test scores, and point to the need to re-standardize normative values for use with Puerto Rican children. Without this type of information, Puerto Rican children may appear more disabled than expected for their level of impairment or not to be making improvements in functional status. The methods also allow for cultural boundaries to be quantitatively established, rather than presupposed. Copyright 2002 Elsevier Science Ltd.

Use of standardized outcome measures in physical therapist practice: perceptions and applications.

Science.gov (United States)

Jette, Diane U; Halbert, James; Iverson, Courtney; Miceli, Erin; Shah, Palak

2009-02-01

Standardized instruments for measuring patients' activity limitations and participation restrictions have been advocated for use by rehabilitation professionals for many years. The available literature provides few recent reports of the use of these measures by physical therapists in the United States. The primary purpose of this study was to determine: (1) the extent of the use of standardized outcome measures and (2) perceptions regarding their benefits and barriers to their use. A secondary purpose was to examine factors associated with their use among physical therapists in clinical practice. The study used an observational design. A survey questionnaire comprising items regarding the use and perceived benefits and barriers of standardized outcome measures was sent to 1,000 randomly selected members of the American Physical Therapy Association (APTA). Forty-eight percent of participants used standardized outcome measures. The majority of participants (>90%) who used such measures believed that they enhanced communication with patients and helped direct the plan of care. The most frequently reported reasons for not using such measures included length of time for patients to complete them, length of time for clinicians to analyze the data, and difficulty for patients in completing them independently. Use of standardized outcome measures was related to specialty certification status, practice setting, and the age of the majority of patients treated. The limitations included an unvalidated survey for data collection and a sample limited to APTA members. Despite more than a decade of development and testing of standardized outcome measures appropriate for various conditions and practice settings, physical therapists have some distance to go in implementing their use routinely in most clinical settings. Based on the perceived barriers, alterations in practice management strategies and the instruments themselves may be necessary to increase their use.

Standard test method for measurement of web/roller friction characteristics

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This test method covers the simulation of a roller/web transport tribosystem and the measurement of the static and kinetic coefficient of friction of the web/roller couple when sliding occurs between the two. The objective of this test method is to provide users with web/roller friction information that can be used for process control, design calculations, and for any other function where web/roller friction needs to be known. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Overview of the Standard Model Measurements with the ATLAS Detector

CERN Document Server

Liu, Yanwen; The ATLAS collaboration

2017-01-01

The ATLAS Collaboration is engaged in precision measurement of fundamental Standard Model parameters, such as the W boson mass, the weak-mixing angle or the strong coupling constant. In addition, the production cross-sections of a large variety of final states involving high energetic jets, photons as well as single and multi vector bosons are measured multi differentially at several center of mass energies. This allows to test perturbative QCD calculations to highest precision. In addition, these measurements allow also to test models beyond the SM, e.g. those leading to anomalous gauge couplings. In this talk, we give a broad overview of the Standard Model measurement campaign of the ATLAS collaboration, where selected topics will be discussed in more detail.

Live weight and body measurements of male and female native ducks raised in different raising systems

Directory of Open Access Journals (Sweden)

Kadir Önk

2018-05-01

Full Text Available ABSTRACT The purpose of this study was to determine live weight and body measurements of male and female native ducks raised in different raising systems. One hundred and twenty native ducks (60 males, 60 females were used in the study. The ducks were raised in deep litter floor and cage systems. Live weight and body values were measured every two weeks, until they were 56 days old. Three-parameter logistic regression and Gompertz model were used to determine growth model of male and female ducks. Interactions of time-raising system and time-sex were statistically significant in terms of live weight. At the end of eight weeks, live weights of ducks raised in deep litter floor were higher than ducks raised in cage system. In addition, live weights of male ducks were higher than female ducks. Consequently, deep litter floor is more appropriate for live weight in native ducks. Accuracy rate of Three-parameter Logistic and Gompertz models for estimation of growth in ducks was between 0.91-0.95 and similar results were obtained from both models. The Gompertz model is appropriate for the data structure of this study because it contains fewer iterations than the Three-Parameter Logistic model.

Development of standard ionization chamber counting system for activity measurements

International Nuclear Information System (INIS)

Pyun, Woong Beom; Lee, Hyun Koo; Lee, Hai Yong; Park, Tae Soon

1998-01-01

This study is to set up the activity measuring system using a 4π γ ionization chamber as used mainly in national standards laboratories that are responsible for radionuclide metrology. The software for automatic control between the electrometer and personal computer is developed using Microsoft visual basic 4.0 and IEEE488 Interface. The reproducibility of this 4π γ ionization chamber is about 0.02% and the background current is 0.054±0.024 pA. this 4π γ ionization chamber is calibrated by 6 standard gamma emitting radionuclides from KRISS. According to the result of this study, it is revealed that this 4π γ ionization chamber counting system can be used as a secondary standard instrument for radioactivity measurement

Development of standard ionization chamber counting system for activity measurements

CERN Document Server

Pyun, W B; Lee, H Y; Park, T S

1998-01-01

This study is to set up the activity measuring system using a 4 pi gamma ionization chamber as used mainly in national standards laboratories that are responsible for radionuclide metrology. The software for automatic control between the electrometer and personal computer is developed using Microsoft visual basic 4.0 and IEEE488 Interface. The reproducibility of this 4 pi gamma ionization chamber is about 0.02% and the background current is 0.054+-0.024 pA. this 4 pi gamma ionization chamber is calibrated by 6 standard gamma emitting radionuclides from KRISS. According to the result of this study, it is revealed that this 4 pi gamma ionization chamber counting system can be used as a secondary standard instrument for radioactivity measurement.

Temperature standards, what and where: resources for effective temperature measurements

International Nuclear Information System (INIS)

Johnston, W.W. Jr.

1982-01-01

Many standards have been published to describe devices, methods, and other topics. How they are developed and by whom are briefly described, and an attempt is made to extract most of those relating to temperature measurements. A directory of temperature standards and their sources is provided

Spectroscopic metrology for isotope composition measurements and transfer standards

Science.gov (United States)

Anyangwe Nwaboh, Javis; Balslev-Harder, David; Kääriäinen, Teemu; Richmond, Craig; Manninen, Albert; Mohn, Joachim; Kiseleva, Maria; Petersen, Jan C.; Werhahn, Olav; Ebert, Volker

2017-04-01

The World Meteorological Organization (WMO) has identified greenhouse gases such as CO2, CH4 and N2O as critical for global climate monitoring. Other molecules such as CO that has an indirect effect of enhancing global warming are also monitored. WMO has stated compatibility goals for atmospheric concentration and isotope ratio measurements of these gases, e.g. 0.1 ppm for CO2 concentration measurements in the northern hemisphere and 0.01 ‰ for δ13C-CO2. For measurements of the concentration of greenhouse gases, gas analysers are typically calibrated with static gas standards e.g. traceable to the WMO scale or to the International System of Units (SI) through a national metrology institute. However, concentrations of target components, e.g. CO, in static gas standards have been observed to drift, and typically the gas matrix as well as the isotopic composition of the target component does not always reflect field gas composition, leading to deviations of the analyser response, even after calibration. The deviations are dependent on the measurement technique. To address this issue, part of the HIGHGAS (Metrology for high-impact greenhouse gases) project [1] focused on the development of optical transfer standards (OTSs) for greenhouse gases, e.g. CO2 and CO, potentially complementing gas standards. Isotope ratio mass spectrometry (IRMS) [2] is currently used to provide state-of-the-art high precision (in the 0.01 ‰ range) measurements for the isotopic composition of greenhouse gases. However, there is a need for field-deployable techniques such as optical isotope ratio spectroscopy (OIRS) that can be combined with metrological measurement methods. Within the HIGHGAS project, OIRS methods and procedures based on e.g. cavity enhanced spectroscopy (CES) and tunable diode laser absorption spectroscopy (TDLAS), matched to metrological principles have been established for the measurement of 13C/12C and 18O/16O ratios in CO2, 15N/14N ratios in N2O, and 13C/12C and 2H

Precision Electroweak Measurements and Constraints on the Standard Model

CERN Document Server

,

2010-01-01

This note presents constraints on Standard Model parameters using published and preliminary precision electroweak results measured at the electron-positron colliders LEP and SLC. The results are compared with precise electroweak measurements from other experiments, notably CDF and DØ at the Tevatron. Constraints on the input parameters of the Standard Model are derived from the combined set of results obtained in high-$Q^2$ interactions, and used to predict results in low-$Q^2$ experiments, such as atomic parity violation, Møller scattering, and neutrino-nucleon scattering. The main changes with respect to the experimental results presented in 2009 are new combinations of results on the width of the W boson and the mass of the top quark.

Conditional Standard Errors of Measurement for Scale Scores.

Science.gov (United States)

Kolen, Michael J.; And Others

1992-01-01

A procedure is described for estimating the reliability and conditional standard errors of measurement of scale scores incorporating the discrete transformation of raw scores to scale scores. The method is illustrated using a strong true score model, and practical applications are described. (SLD)

Constraining new physics with collider measurements of Standard Model signatures

Energy Technology Data Exchange (ETDEWEB)

Butterworth, Jonathan M. [Department of Physics and Astronomy, University College London,Gower St., London, WC1E 6BT (United Kingdom); Grellscheid, David [IPPP, Department of Physics, Durham University,Durham, DH1 3LE (United Kingdom); Krämer, Michael; Sarrazin, Björn [Institute for Theoretical Particle Physics and Cosmology, RWTH Aachen University,Sommerfeldstr. 16, 52056 Aachen (Germany); Yallup, David [Department of Physics and Astronomy, University College London,Gower St., London, WC1E 6BT (United Kingdom)

2017-03-14

A new method providing general consistency constraints for Beyond-the-Standard-Model (BSM) theories, using measurements at particle colliders, is presented. The method, ‘Constraints On New Theories Using Rivet’, CONTUR, exploits the fact that particle-level differential measurements made in fiducial regions of phase-space have a high degree of model-independence. These measurements can therefore be compared to BSM physics implemented in Monte Carlo generators in a very generic way, allowing a wider array of final states to be considered than is typically the case. The CONTUR approach should be seen as complementary to the discovery potential of direct searches, being designed to eliminate inconsistent BSM proposals in a context where many (but perhaps not all) measurements are consistent with the Standard Model. We demonstrate, using a competitive simplified dark matter model, the power of this approach. The CONTUR method is highly scaleable to other models and future measurements.

Stability check source measurements with a secondary standard dosimeter in SSDL-Pakistan

International Nuclear Information System (INIS)

Salman, S.; Mahmoud, K.; Orfi, S.D.

1988-01-01

The stability check source is an integral part of a Secondary Standard Dosimetry System. The purpose of the stability check source is to confirm that the overall response of the dosimeter has not changed significantly since the instrument was calibrated. In case any change in the sensitivity of the ionization chamber or measuring assembly occurs the same is reflected in the reference check source measurements. Stability check source measurements are taken in a Primary Standard Dosimetry Laboratory (PSDL) at the time of calibration of secondary standard dosimeter and mean time (in seconds) to the reference setting of 50 scale divisions with ambient conditions of air at 20 deg. C, 101.3 kPa and 50% RH is quoted in a calibration certificate. This quoted stability check source time figure is the basis for future confirmation of overall response of the secondary standard dosimeter system. This note presents the results of stability check source measurements carried out in SSDL Pakistan over a period of five years

Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 This test method covers the measurement of a steady heat flux to a given water-cooled surface by means of a system energy balance. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Designing Standardized Patient Assessments to Measure SBIRT Skills

Science.gov (United States)

Wamsley, Maria A.; Julian, Katherine A.; O'Sullivan, Patricia; Satterfield, Jason M.; Satre, Derek D.; McCance-Katz, Elinore; Batki, Steven L.

2013-01-01

Objectives: Resident physicians report insufficient experience caring for patients with substance use disorders (SUDs). Resident training in Screening, Brief Intervention, and Referral to Treatment (SBIRT) has been recommended. We describe the development of a standardized patient (SP) assessment to measure SBIRT skills, resident perceptions of…

Precision and accuracy, two steps towards the standardization of XRPD measurements

International Nuclear Information System (INIS)

Berti, G.

1996-01-01

Any standardization process requires to get at results comprehensible, reproducible and traceable. Precision and accuracy of the measurements play a key role in getting at these requirements. The adoption of either physical (standard) or mathematical models allows for describing the whole diffraction measurement process with the necessary physical significance. From an other hand, the adoption of procedure, which are capable of controlling the measurement process, renders it reproducible and traceable. The falling of those requirements make difficult to transfer or replicate elsewhere experiences which may give even excellent result in a given laboratory

Precision and accuracy, two steps towards the standardization of XRPD measurements

Energy Technology Data Exchange (ETDEWEB)

Berti, G [Pisa Univ. (Italy). Dept. of Earth Sciences

1996-09-01

Any standardization process requires to get at results comprehensible, reproducible and traceable. Precision and accuracy of the measurements play a key role in getting at these requirements. The adoption of either physical (standard) or mathematical models allows for describing the whole diffraction measurement process with the necessary physical significance. From an other hand, the adoption of procedure, which are capable of controlling the measurement process, renders it reproducible and traceable. The falling of those requirements make difficult to transfer or replicate elsewhere experiences which may give even excellent result in a given laboratory.

The relationship between standard automated perimetry and GDx VCC measurements

NARCIS (Netherlands)

N.J. Reus; H.G. Lemij (Hans)

2004-01-01

textabstractPURPOSE: To investigate the relationship between retinal light sensitivity measured with standard automated perimetry (SAP) and retardation of the peripapillary retinal nerve fiber layer (RNFL) measured with the GDx VCC (Laser Diagnostic Technologies, Inc., San Diego,

Standard test method for measurement of corrosion potentials of Aluminum alloys

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

1.1 This test method covers a procedure for measurement of the corrosion potential (see Note 1) of an aluminum alloy in an aqueous solution of sodium chloride with enough hydrogen peroxide added to provide an ample supply of cathodic reactant. Note 1—The corrosion potential is sometimes referred to as the open-circuit solution or rest potential. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Living up to high standards and psychological distress

NARCIS (Netherlands)

Van Yperen, N.W.; Hagedoorn, Mariët

We argue and demonstrate that setting high standards, an essential aspect of perfectionism, is not associated with maladaptive responses in and of itself. Rather, our findings suggest that people's responses to their perceptions that they consistently fail to meet their own standards are

Measurement of microchannel fluidic resistance with a standard voltage meter.

Science.gov (United States)

Godwin, Leah A; Deal, Kennon S; Hoepfner, Lauren D; Jackson, Louis A; Easley, Christopher J

2013-01-03

A simplified method for measuring the fluidic resistance (R(fluidic)) of microfluidic channels is presented, in which the electrical resistance (R(elec)) of a channel filled with a conductivity standard solution can be measured and directly correlated to R(fluidic) using a simple equation. Although a slight correction factor could be applied in this system to improve accuracy, results showed that a standard voltage meter could be used without calibration to determine R(fluidic) to within 12% error. Results accurate to within 2% were obtained when a geometric correction factor was applied using these particular channels. When compared to standard flow rate measurements, such as meniscus tracking in outlet tubing, this approach provided a more straightforward alternative and resulted in lower measurement error. The method was validated using 9 different fluidic resistance values (from ∼40 to 600kPa smm(-3)) and over 30 separately fabricated microfluidic devices. Furthermore, since the method is analogous to resistance measurements with a voltage meter in electrical circuits, dynamic R(fluidic) measurements were possible in more complex microfluidic designs. Microchannel R(elec) was shown to dynamically mimic pressure waveforms applied to a membrane in a variable microfluidic resistor. The variable resistor was then used to dynamically control aqueous-in-oil droplet sizes and spacing, providing a unique and convenient control system for droplet-generating devices. This conductivity-based method for fluidic resistance measurement is thus a useful tool for static or real-time characterization of microfluidic systems. Copyright © 2012 Elsevier B.V. All rights reserved.

Giardia duodenalis infection: risk factors for children living in sub-standard settlements in Brazil

Directory of Open Access Journals (Sweden)

Júlio César Teixeira

2007-06-01

Full Text Available The objective of the present study was to characterize Giardia duodenalis infection among children living in sub-standard settlement areas in the municipality of Juiz de Fora, Minas Gerais State, Brazil. The cross-sectional epidemiological study included 590 children from 1 to 5 years of age. Data were collected from one child per selected family through home interviews with the parent or guardian and parasitological examination of stool samples. Thirty-one putative risk factors concerning family structure, socioeconomic status, and environmental factors were analyzed by multivariate logistic regression. Prevalence of G. duodenalis infection was 18% (106 children. Four potential risk factors were heavily associated with G. duodenalis infection: number of under-five children in the same household, index child's birth order, existence of a bathroom in the home, and drinking water source.

A new formula for estimation of standard liver volume using computed tomography-measured body thickness.

Science.gov (United States)

Ma, Ka Wing; Chok, Kenneth S H; Chan, Albert C Y; Tam, Henry S C; Dai, Wing Chiu; Cheung, Tan To; Fung, James Y Y; Lo, Chung Mau

2017-09-01

The objective of this article is to derive a more accurate and easy-to-use formula for finding estimated standard liver volume (ESLV) using novel computed tomography (CT) measurement parameters. New formulas for ESLV have been emerging that aim to improve the accuracy of estimation. However, many of these formulas contain body surface area measurements and logarithms in the equations that lead to a more complicated calculation. In addition, substantial errors in ESLV using these old formulas have been shown. An improved version of the formula for ESLV is needed. This is a retrospective cohort of consecutive living donor liver transplantations from 2005 to 2016. Donors were randomly assigned to either the formula derivation or validation groups. Total liver volume (TLV) measured by CT was used as the reference for a linear regression analysis against various patient factors. The derived formula was compared with the existing formulas. There were 722 patients (197 from the derivation group, 164 from the validation group, and 361 from the recipient group) involved in the study. The donor's body weight (odds ratio [OR], 10.42; 95% confidence interval [CI], 7.25-13.60; P Liver Transplantation 23 1113-1122 2017 AASLD. © 2017 by the American Association for the Study of Liver Diseases.

A Standardized Generalized Dimensionality Discrepancy Measure and a Standardized Model-Based Covariance for Dimensionality Assessment for Multidimensional Models

Science.gov (United States)

Levy, Roy; Xu, Yuning; Yel, Nedim; Svetina, Dubravka

2015-01-01

The standardized generalized dimensionality discrepancy measure and the standardized model-based covariance are introduced as tools to critique dimensionality assumptions in multidimensional item response models. These tools are grounded in a covariance theory perspective and associated connections between dimensionality and local independence.…

First among Others? Cohen's "d" vs. Alternative Standardized Mean Group Difference Measures

Science.gov (United States)

Cahan, Sorel; Gamliel, Eyal

2011-01-01

Standardized effect size measures typically employed in behavioral and social sciences research in the multi-group case (e.g., [eta][superscript 2], f[superscript 2]) evaluate between-group variability in terms of either total or within-group variability, such as variance or standard deviation--that is, measures of dispersion about the mean. In…

Secondary standards (non-activation) for neutron data measurements above 20 MeV

International Nuclear Information System (INIS)

Haight, R.C.

1991-01-01

In addition to H(n,p) scattering and 235,238 U(n,f) reactions, secondary standards for neutron flux determination may be useful for neutron energies above 20 MeV. For experiments where gamma rays are detected, reference gamma-ray production cross sections are relevant. For neutron-induced charged particle production, standard (n,p) and (n,alpha) cross sections would be helpful. Total cross section standards would serve to check the accuracy of these measurements. These secondary standards are desirable because they can be used with the same detector systems employed in measuring the quantities of interest. Uncertainties due to detector efficiency, geometrical effects, timing and length of flight paths can therefore be significantly reduced. Several secondary standards that do not depend on activation techniques are proposed. 14 refs

Standard test method for measurement of oxidation-reduction potential (ORP) of soil

CERN Document Server

American Society for Testing and Materials. Philadelphia

2009-01-01

1.1 This test method covers a procedure and related test equipment for measuring oxidation-reduction potential (ORP) of soil samples removed from the ground. 1.2 The procedure in Section 9 is appropriate for field and laboratory measurements. 1.3 Accurate measurement of oxidation-reduction potential aids in the analysis of soil corrosivity and its impact on buried metallic structure corrosion rates. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Data format standard for sharing light source measurements

Science.gov (United States)

Gregory, G. Groot; Ashdown, Ian; Brandenburg, Willi; Chabaud, Dominique; Dross, Oliver; Gangadhara, Sanjay; Garcia, Kevin; Gauvin, Michael; Hansen, Dirk; Haraguchi, Kei; Hasna, Günther; Jiao, Jianzhong; Kelley, Ryan; Koshel, John; Muschaweck, Julius

2013-09-01

Optical design requires accurate characterization of light sources for computer aided design (CAD) software. Various methods have been used to model sources, from accurate physical models to measurement of light output. It has become common practice for designers to include measured source data for design simulations. Typically, a measured source will contain rays which sample the output distribution of the source. The ray data must then be exported to various formats suitable for import into optical analysis or design software. Source manufacturers are also making measurements of their products and supplying CAD models along with ray data sets for designers. The increasing availability of data has been beneficial to the design community but has caused a large expansion in storage needs for the source manufacturers since each software program uses a unique format to describe the source distribution. In 2012, the Illuminating Engineering Society (IES) formed a working group to understand the data requirements for ray data and recommend a standard file format. The working group included representatives from software companies supplying the analysis and design tools, source measurement companies providing metrology, source manufacturers creating the data and users from the design community. Within one year the working group proposed a file format which was recently approved by the IES for publication as TM-25. This paper will discuss the process used to define the proposed format, highlight some of the significant decisions leading to the format and list the data to be included in the first version of the standard.

Creation of the {pi} angle standard for the flat angle measurements

Energy Technology Data Exchange (ETDEWEB)

Giniotis, V; Rybokas, M, E-mail: gi@ap.vtu.l, E-mail: MRybokas@gama.l [Department of Information Technologies, Vilnius Gediminas Technical University, Sauletekio al. 11, 10223 Vilnius-40 (Lithuania)

2010-07-01

Angle measurements are based mainly on multiangle prisms - polygons with autocollimators, rotary encoders for high accuracy and circular scales as the standards of the flat angle. Traceability of angle measurements is based on the standard of the plane angle - prism (polygon) calibrated at an appropriate accuracy. Some metrological institutions have established their special test benches (comparators) equipped with circular scales or rotary encoders of high accuracy and polygons with autocollimators for angle calibration purposes. Nevertheless, the standard (etalon) of plane angle - polygon has many restrictions for the transfer of angle unit - radian (rad) and other units of angle. It depends on the number of angles formed by the flat sides of the polygon that is restricted by technological and metrological difficulties related to the production and accuracy determination of the polygon. A possibility to create the standard of the angle equal to {pi} rad or half the circle or the full angle is proposed. It can be created by the circular scale with the rotation axis of very high accuracy and two precision reading instruments, usually, photoelectric microscopes (PM), placed on the opposite sides of the circular scale using the special alignment steps. A great variety of angle units and values can be measured and its traceability ensured by applying the third PM on the scale. Calibration of the circular scale itself and other scale or rotary encoder as well is possible using the proposed method with an implementation of {pi} rad as the primary standard angle. The method proposed enables to assure a traceability of angle measurements at every laboratory having appropriate environment and reading instruments of appropriate accuracy together with a rotary table with the rotation axis of high accuracy - rotation trajectory (runout) being in the range of 0.05 {mu}m. Short information about the multipurpose angle measurement test bench developed is presented.

Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This test method covers measuring the angular deviation of a light ray imposed by transparent parts such as aircraft windscreens and canopies. The results are uncontaminated by the effects of lateral displacement, and the procedure may be performed in a relatively short optical path length. This is not intended as a referee standard. It is one convenient method for measuring angular deviations through transparent windows. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

"First among Others? Cohen's ""d"" vs. Alternative Standardized Mean Group Difference Measures"

Directory of Open Access Journals (Sweden)

Sorel Cahan

2011-06-01

Full Text Available Standardized effect size measures typically employed in behavioral and social sciences research in the multi-group case (e.g., 2, f2 evaluate between-group variability in terms of either total or within-group variability, such as variance or standard deviation -' that is, measures of dispersion about the mean. In contrast, the definition of Cohen's d, the effect size measure typically computed in the two-group case, is incongruent due to a conceptual difference between the numerator -' which measures between-group variability by the intuitive and straightforward raw difference between the two group means -' and the denominator - which measures within-group variability in terms of the difference between all observations and the group mean (i.e., the pooled within-groups standard deviation, SW. Two congruent alternatives to d, in which the root square or absolute mean difference between all observation pairs is substituted for SW as the variability measure in the denominator of d, are suggested and their conceptual and statistical advantages and disadvantages are discussed.

Vitamin D measurement standardization: the way out of the chaos

Science.gov (United States)

Substantial variability is associated with laboratory measurement of serum total 25-hydroxyvitamin D [25(OH)D]. The resulting chaos impedes development of consensus 25(OH)D values to define stages of vitamin D status. As resolving this situation requires standardized measurement of 25(OH)D, the Vita...

Teacher Assessment Literacy: A Review of International Standards and Measures

Science.gov (United States)

DeLuca, Christopher; LaPointe-McEwan, Danielle; Luhanga, Ulemu

2016-01-01

Assessment literacy is a core professional requirement across educational systems. Hence, measuring and supporting teachers' assessment literacy have been a primary focus over the past two decades. At present, there are a multitude of assessment standards across the world and numerous assessment literacy measures that represent different…

Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers procedures for measuring reaction rates by assaying a fission product (F.P.) from the fission reaction 238U(n,f)F.P. 1.2 The reaction is useful for measuring neutrons with energies from approximately 1.5 to 7 MeV and for irradiation times up to 30 to 40 years. 1.3 Equivalent fission neutron fluence rates as defined in Practice E 261 can be determined. 1.4 Detailed procedures for other fast-neutron detectors are referenced in Practice E 261. 1.5 The values stated in SI units are to be regarded as standard. No other unites of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers procedures for measuring reaction rates by assaying a fission product (F.P.) from the fission reaction 237Np(n,f)F.P. 1.2 The reaction is useful for measuring neutrons with energies from approximately 0.7 to 6 MeV and for irradiation times up to 30 to 40 years. 1.3 Equivalent fission neutron fluence rates as defined in Practice E 261 can be determined. 1.4 Detailed procedures for other fast-neutron detectors are referenced in Practice E 261. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Measurement of the depth of narrow slotted sections in eddy current reference standards

Science.gov (United States)

Kim, Young-Joo; Kim, Young-gil; Ahn, Bongyoung; Yoon, Dong-Jin

2007-02-01

The dimensions of the slots in eddy current (EC) reference standards are too narrow to be measured by general depth measurement methods such as the optical (laser) or stylus methods. However, measurement of the dimensions of the machined slots is a prerequisite to using the blocks as references. The present paper suggests a measurement method for the slotted section using an ultrasonic test. The width and depth of the slots measured in our study are roughly 0.1 mm and 0.5 mm, respectively. The time of flight (TOF) of the ultrasonic wave was measured precisely. The ultrasonic velocity in the material of the EC reference standard was calculated with the measured values of the TOF and its thickness. Reflected waves from the tip of the slot and the bottom surface of the EC standard were successfully classified. Using this method we have successfully determined the depth of the slotted section.

The Disposition of Water Supply and Demand in Cameroon: What Potential for what Standard of Living Conditions?

Directory of Open Access Journals (Sweden)

Oumar Saidou Baba

2017-04-01

Full Text Available Aim/purpose - This paper attempts to appraise the potential of water resources for Cameroon and the standard of living conditions confronting people in the country. Design/methodology/approach - A simple descriptive method of data analysis is adopted using analytical tools such as percentages, tables, and means to achieve the objectives of the inquiry. Data for the study were generated from personal observations in one hand and collected from water resources literature, on the other hand. Findings - With the help of the data gathered, the paper establishes that despite the existence of abundant water resources in Cameroon the standard of living conditions of people with respect to basic needs of survival such as drinking water, improved sanitation services, and electricity supply is far below expectation. Research implications/limitations - The main implication of the study is that in spite of the surplus volume of water resources (325.96 km3 or 95.12% of annual total water resources endowment in Cameroon, the population benefits marginally from it due to the mismanagement of resources and misplacement of priorities as obtained in most sub-Saharan African countries. One limitation of this study is that the use of limited primary data in the investigation offers no room toward establishing the extent of water resources allocation to the various users of water in the country. Originality/value/contribution - The paper suggests that the government of Cameroon should encourage the population to run community basic social services projects and subsidize the activities of such ventures in kind through technical assistance or in cash.

Safety standards for near surface disposal and the safety case and supporting safety assessment for demonstrating compliance with the standards

International Nuclear Information System (INIS)

Metcalf, P.

2003-01-01

The report presents the safety standards for near surface disposal (ICRP guidance and IAEA standards) and the safety case and supporting safety assessment for demonstrating compliance with the standards. Special attention is paid to the recommendations for disposal of long-lived solid radioactive waste. The requirements are based on the principle for the same level of protection of future individuals as for the current generation. Two types of exposure are considered: human intrusion and natural processes and protection measures are discussed. Safety requirements for near surface disposal are discussed including requirements for protection of human health and environment, requirements or safety assessments, waste acceptance and requirements etc

Veterinary antimicrobial-usage statistics based on standardized measures of dosage

DEFF Research Database (Denmark)

Jensen, Vibeke Frøkjær; Jacobsen, Erik; Bager, Flemming

2004-01-01

In human medicine, the defined daily dose is used as a technical measure of drug usage, which is independent of the variations in the potency of the active compound and the formulation of the pharmaceutical product-therefore providing a measure of the relative importance of different drugs....... A national system of animal defined daily doses (ADD) for each age-group and species has been defined in VetStat (the Danish national system monitoring veterinary therapeutic drug use). The usage is further standardized according to the number of animals in the target population, acquired from production...... data on the national level or on herd size by species and age in the Danish central husbandry register (CHR). Statistics based on standardized measures of VetStat data can be used for comparison of drug usage between different herds, veterinary practices, or geographic regions (allowing subdivision...

Standard test method for calibration of surface/stress measuring devices

CERN Document Server

American Society for Testing and Materials. Philadelphia

1997-01-01

Return to Contents page 1.1 This test method covers calibration or verification of calibration, or both, of surface-stress measuring devices used to measure stress in annealed and heat-strengthened or tempered glass using polariscopic or refractometry based principles. 1.2 This test method is nondestructive. 1.3 This test method uses transmitted light, and therefore, is applicable to light-transmitting glasses. 1.4 This test method is not applicable to chemically tempered glass. 1.5 Using the procedure described, surface stresses can be measured only on the “tin” side of float glass. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

A spectrum standardization approach for laser-induced breakdown spectroscopy measurements

Energy Technology Data Exchange (ETDEWEB)

Wang Zhe, E-mail: zhewang@mail.tsinghua.edu.cn; Li Lizhi; West, Logan; Li Zheng, E-mail: lz-dte@tsinghua.edu.cn; Ni Weidou

2012-02-15

This paper follows and completes a previous presentation of a spectrum normalization method for laser-induced breakdown spectroscopy (LIBS) measurements by converting the experimentally recorded line intensity at varying operational conditions to the intensity that would be obtained under a 'standard state' condition, characterized by a standard plasma temperature, electron number density, and total number density of the interested species. At first, for each laser shot and corresponding spectrum, the line intensities of the interested species are converted to the intensity at a fixed plasma temperature and electron number density, but with varying total number density. Under this state, if the influence of changing plasma morphology is neglected, the sum of multiple spectral line intensities for the measured element is proportional to the total number density of the specific element. Therefore, the fluctuation of the total number density, or the variation of ablation mass, can be compensated for by applying the proportional relationship. The application of this method to Cu in 29 brass alloy samples, showed an improvement over the commonly applied normalization method with regard to measurement precision and accuracy. The average relative standard deviation (RSD) value, average value of the error bar, R{sup 2}, root mean square error of prediction (RMSEP), and average value of the maximum relative error were: 5.29%, 0.68%, 0.98, 2.72%, 16.97%, respectively, while the above parameter values for normalization with the whole spectrum area were: 8.61%, 1.37%, 0.95, 3.28%, 29.19%, respectively. - Highlights: Black-Right-Pointing-Pointer Intensity converted into an ideal standard plasma state for uncertainty reduction. Black-Right-Pointing-Pointer Ablated mass fluctuations compensated by variation of sum of multiple intensities. Black-Right-Pointing-Pointer A spectrum standardization model established. Black-Right-Pointing-Pointer Results in both uncertainty

Effect of measurement conditions on three-dimensional roughness values, and development of measurement standard

International Nuclear Information System (INIS)

Fabre, A; Brenier, B; Raynaud, S

2011-01-01

Friction or corrosion behaviour, fatigue lifetime for mechanical components are influenced by their boundary and subsurface properties. The surface integrity is studied on mechanical component in order to improve the service behaviour of them. Roughness is one of the main geometrical properties, which is to be qualified and quantified. Components can be obtained using a complex process: forming, machining and treatment can be combined to realize parts with complex shape. Then, three-dimensional roughness is needed to characterize these parts with complex shape and textured surface. With contact or non-contact measurements (contact stylus, confocal microprobe, interferometer), three-dimensional roughness is quantified using the calculation of pertinent parameters defined by the international standard PR EN ISO 25178-2:2008. An analysis will identify the influence of measurement conditions on three-dimensional parameters. The purpose of this study is to analyse the variation of roughness results using contact stylus or optical apparatus. The second aim of this work is to develop a measurement standard well adapted to qualify the contact and non-contact apparatus.

Flowing-water optical power meter for primary-standard, multi-kilowatt laser power measurements

Science.gov (United States)

Williams, P. A.; Hadler, J. A.; Cromer, C.; West, J.; Li, X.; Lehman, J. H.

2018-06-01

A primary-standard flowing-water optical power meter for measuring multi-kilowatt laser emission has been built and operated. The design and operational details of this primary standard are described, and a full uncertainty analysis is provided covering the measurement range from 1–10 kW with an expanded uncertainty of 1.2%. Validating measurements at 5 kW and 10 kW show agreement with other measurement techniques to within the measurement uncertainty. This work of the U.S. Government is not subject to U.S. copyright.

A Step Towards Electric Propulsion Testing Standards: Pressure Measurements and Effective Pumping Speeds

Science.gov (United States)

Dankanich, John W.; Swiatek, Michael W.; Yim, John T.

2012-01-01

The electric propulsion community has been implored to establish and implement a set of universally applicable test standards during the research, development, and qualification of electric propulsion systems. Existing practices are fallible and result in testing variations which leads to suspicious results, large margins in application, or aversion to mission infusion. Performance measurements and life testing under appropriate conditions can be costly and lengthy. Measurement practices must be consistent, accurate, and repeatable. Additionally, the measurements must be universally transportable across facilities throughout the development, qualification, spacecraft integration and on-orbit performance. A preliminary step to progress towards universally applicable testing standards is outlined for facility pressure measurements and effective pumping speed calculations. The standard has been applied to multiple facilities at the NASA Glenn Research Center. Test results and analyses of universality of measurements are presented herein.

Requirements for a quality measurement instrument for semantic standards

NARCIS (Netherlands)

Folmer, E.J.A.; Krukkert, D.; Oude Luttighuis, P.; Hillegersberg van, J. van

2010-01-01

This study describes requirements for an instrument to measure the quality of semantic standards. A situational requirements engineering method was used, resulting in a goal-tree in which requirements are structured. This structure shows requirements related to the input of the instrument; stating

Relationships Between Live Body and Carcass Measurements and Carcass Components in Omani Sheep

Directory of Open Access Journals (Sweden)

O. Mahgoub

1998-01-01

Full Text Available Thirty two Omani sheep including eight intact males. 16 castrated males and eight intact females were fed ad libitum a concentrate diet (l6% CP plus chopped Rhodesgrass hay (8% CP from weaning until slaughter at an average weight of 26 kg. Correlation and regression analyses were carried out to evaluate relationships between live body and carcass measurements with major body components. Generally there were positive correlations between slaughter weight, empty body weight (EBW and hot carcass weight with total carcass muscle (r2 =0.57, 0.59, 0.59. fat (r2= 0.47, 0.48, 0.68 and bone (r2 = 0.51, 0.44, 0.31 contents respectively. There were also positive correlations (r2 = 0.44- 0.59 between linear live body and carcass measurements with carcass muscle content. The depth of tissue over the 11th rib (GR had a high positive correlation (r2= 0.67 with total carcass fat content. The weight of most individual bones and muscles had positive correlations (r2=0.39 - 0.85 with carcass muscle and bone content. There was a positive correlation between weight chuck (r2 = 0.62, brisket and shank (r2< 0.38, leg (r2 = 0.79 and loin (r2 = 0.45 carcass cuts with total carcass muscle content. Muscle content in all carcass cuts had a positive correlation (r2 = 0.46-0.86 with total carcass muscle content. Bone content in all carcass cuts had a high positive correlation (r2 = 0.46-0.90 with the total carcass bone content. A 3-variahle (body length,  chest depth and leg length and a 4-variable (hot carcass weight , hook width,  rib width and GR models were generated which accounted for 84% and 70% of the variation in the total muscle content, respectively. This study showed that live body and carcass measurements have significant relationships with carcass components in Omani sheep. These relationships may be utilized for prediction of carcass composition in live animals as well as for carcass quality assessment.

Quantifying short-lived events in multistate ionic current measurements.

Science.gov (United States)

Balijepalli, Arvind; Ettedgui, Jessica; Cornio, Andrew T; Robertson, Joseph W F; Cheung, Kin P; Kasianowicz, John J; Vaz, Canute

2014-02-25

We developed a generalized technique to characterize polymer-nanopore interactions via single channel ionic current measurements. Physical interactions between analytes, such as DNA, proteins, or synthetic polymers, and a nanopore cause multiple discrete states in the current. We modeled the transitions of the current to individual states with an equivalent electrical circuit, which allowed us to describe the system response. This enabled the estimation of short-lived states that are presently not characterized by existing analysis techniques. Our approach considerably improves the range and resolution of single-molecule characterization with nanopores. For example, we characterized the residence times of synthetic polymers that are three times shorter than those estimated with existing algorithms. Because the molecule's residence time follows an exponential distribution, we recover nearly 20-fold more events per unit time that can be used for analysis. Furthermore, the measurement range was extended from 11 monomers to as few as 8. Finally, we applied this technique to recover a known sequence of single-stranded DNA from previously published ion channel recordings, identifying discrete current states with subpicoampere resolution.

Method for Estimating Evaporative Potential (IM/CLO) from ASTM Standard Single Wind Velocity Measures

Science.gov (United States)

2016-08-10

IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY MEASURES DISCLAIMER The opinions or assertions contained herein are the private views of the...USARIEM TECHNICAL REPORT T16-14 METHOD FOR ESTIMATING EVAPORATIVE POTENTIAL (IM/CLO) FROM ASTM STANDARD SINGLE WIND VELOCITY... ASTM STANDARD SINGLE WIND VELOCITY MEASURES Adam W. Potter Biophysics and Biomedical Modeling Division U.S. Army Research Institute of Environmental

The Czech national long distances measuring standard Koštice - State of play

Directory of Open Access Journals (Sweden)

Ladislav Červinka

2009-11-01

Full Text Available This article gives information about new Czech national long distances measuring standard, which has been preparedat the distance base near the Koštice village. Submitter of the project is the Czech Office for Standards, Metrology and Testing.Research and document preparation for creation of the measuring standard were ensured by the Research Institute of Geodesy,Topography and Cartography. Interlaboratory comparisons were made by staff of the Bundeswehr University in Munich. The paperreports about works, which will be carried out on national standard in the second half of this year. Purpose of this works is to improvecharacteristics of accuracy of national etalon.

Measurement of highly active samples of ultrashort-lived radionuclides and its problems

International Nuclear Information System (INIS)

van der Baan, J.G.; Panek, K.J.

1985-01-01

The measurement of highly active eluates obtained from the generators for ultrashort-lived radionuclides poses several problems which are briefly discussed by using the example of the /sup 195m/Hg→/sup 195m/Au generator. For overcoming some of the problems, the construction of a multiple single-channel analyzer that allows high count rates, is described, as well as the counting technique applicable for highly active eluates

Insulation measurement and supervision in live AC and DC unearthed systems

CERN Document Server

Olszowiec, Piotr

2014-01-01

Low voltage unearthed (IT) AC and DC systems are commonly applied for supply of power and control circuits in industry, transportation, medical objects etc. The main reasons for their use are high reliability and numerous advantages offered by isolating them against ground. Insulation level is a decisive factor for networks operational reliability and safety. Insufficient insulation-to-ground resistance can cause various disturbances. Though ground faults in IT systems do not make networks operation impossible, they may cause severe problems with their safe functioning. In this book the most important issues concerning normal operation and ground fault phenomena are described in concise form. Numerous methods of insulation resistance and capacitance measurement in live circuits are presented. Important other procedures of  these parameters determination based on measurement and calculation are explained and reviews of selected insulation resistance measurement devices as well as earth fault locating systems ...

Insulation measurement and supervision in live AC and DC unearthed systems

CERN Document Server

Olszowiec, Piotr

2013-01-01

Low voltage unearthed (IT) AC and DC systems are commonly applied for supply of power and control circuits in industry, transportation, medical objects etc. The main reasons for their use are high reliability and numerous advantages offered by isolating them against ground. Insulation level is a decisive factor for networks operational reliability and safety. Insufficient insulation-to-ground resistance can cause various disturbances. Though ground faults in IT systems do not make networks operation impossible, they may cause severe problems with their safe functioning. In this book the most important issues concerning normal operation and ground fault phenomena are described in concise form. Numerous methods of insulation resistance and capacitance measurement in live circuits are presented. Important other procedures of  these parameters determination based on measurement and calculation are explained and reviews of selected insulation resistance measurement devices as well as earth fault locating systems ...

On harm thresholds and living organ donation: must the living donor benefit, on balance, from his donation?

Science.gov (United States)

Williams, Nicola Jane

2018-03-01

For the majority of scholars concerned with the ethics of living organ donation, inflicting moderate harms on competent volunteers in order to save the lives or increase the life chances of others is held to be justifiable provided certain conditions are met. These conditions tend to include one, or more commonly, some combination of the following: (1) The living donor provides valid consent to donation. (2) Living donation produces an overall positive balance of harm-benefit for donors and recipients which cannot be obtained in a less harmful manner. (3) Donation is not liable to cause significant and long-term morbidity to, or the death of, the donor. This paper critically examines the suggestion that these criteria are not sufficient to offer a general account of justified living organ donation in the context of competent volunteers and that key to justified living organ donation is that donors receive sufficient benefits from their donation that these outweigh the harms they suffer. However, although this view-termed here 'The Donor Benefit Standard'-directs welcome attention to the many and complex motives which may underlie living organ donation, this paper ultimately concludes that given the threats this position poses to individual autonomy and the lives of those in need of organ transplants 'The Donor Benefit Standard' should ultimately be rejected.

Calibration Standards for Surface Topography Measuring Systems down to Nanometric Range

DEFF Research Database (Denmark)

Trumpold, H.; De Chiffre, Leonardo; Andreasen, Jan Lasson

compression and injection moulded plastic negatives and Ni-negatives have been made from which again Ni-positives were produced. The replication processes showed negligible deviations from the Pt and Pa values compared to the primary standards. An important prerequisite is the cleanliness of the surfaces......Background For the precise and accurate measurement of surface topography a whole range of surface detection systems is available. With their application in research and production problems arise due to the lack of traceable standard artefacts for the instrument calibration in X, Y and Z directions...... and for the calibration of filters. Existing ISO standards on calibration specimens are inadequate and limited in that they only cover contacting instruments and only partially the measuring ranges for these instruments. The whole range of non-contacting instruments are not covered despite their increasing use...

Standardized Symptom Measurement of Individuals with Early Lyme Disease Over Time.

Science.gov (United States)

Bechtold, Kathleen T; Rebman, Alison W; Crowder, Lauren A; Johnson-Greene, Doug; Aucott, John N

2017-03-01

Understanding the Lyme disease (LD) literature is challenging given the lack of consistent methodology and standardized measurement of symptoms and the impact on functioning. This prospective study incorporates well-validated measures to capture the symptom picture of individuals with early LD from time of diagnosis through 6-months post-treatment. One hundred seven patients with confirmed early LD and 26 healthy controls were evaluated using standardized instruments for pain, fatigue, depressive symptoms, functional impact, and cognitive functioning. Prior to antibiotic treatment, patients experience notable symptoms of fatigue and pain statistically higher than controls. After treatment, there are no group differences, suggesting that symptoms resolve and that there are no residual cognitive impairments at the level of group analysis. However, using subgroup analyses, some individuals experience persistent symptoms that lead to functional decline and these individuals can be identified immediately post-completion of standard antibiotic treatment using well-validated symptom measures. Overall, the findings suggest that ideally-treated early LD patients recover well and experience symptom resolution over time, though a small subgroup continue to suffer with symptoms that lead to functional decline. The authors discuss use of standardized instruments for identification of individuals who warrant further clinical follow-up. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Measurements of airborne short-lived radioactivity concentration in a PET facility at a national University hospital

International Nuclear Information System (INIS)

Saito, Tadashi

2006-01-01

National universities in Japan became under regulation of Industrial Safety and Health Law since 2004FY. One of the legal obligations is working environment measurements such as airborne radioactivity concentration in the rooms where employees handle unsealed radiation sources. Both in 2004FY and in 2005FY, measurements of airborne radioactivity concentration were carried out by two different agencies. The most prominent difference among them is the measurement for short-lived PET nuclides. In 2004FY, one agency measured the radioactivity with a Ge spectrometer at its own laboratory, whereas, in 2005FY, the other agency brought a NaI scintillation counter for gross gamma counting to the Hospital. It can be shown that detection limits for short-lived PET nuclides are in principle almost the same in both methods. It is also found that, in the actual case, gamma spectrometry with a Ge spectrometer is superior in judgement of detection of the radioactivity. (author)

48 CFR 9904.412 - Cost accounting standard for composition and measurement of pension cost.

Science.gov (United States)

2010-10-01

... accounting standard for composition and measurement of pension cost. ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Cost accounting standard for composition and measurement of pension cost. 9904.412 Section 9904.412 Federal Acquisition...

Growth measures among preschool-age Inuit children living in Canada and Greenland.

Science.gov (United States)

Galloway, Tracey; Niclasen, Birgit V L; Muckle, Gina; Young, Kue; Egeland, Grace M

2012-12-01

The present study reports findings from a study of preschool-age Inuit children living in the Arctic regions of Canada and Greenland. We compare stature and obesity measures using cutoffs from the Centers for Disease Control and the International Obesity Task Force references. The sample is comprised of 1121 Inuit children (554 boys and 567 girls) aged 3-5 years living in Nunavut (n=376) and Nunavik (n=87), Canada, in the capital city of Nuuk, Greenland (n=86), and in Greenland's remaining towns and villages (n=572). Greenland Inuit children were significantly taller than their Canadian counterparts, with greatest height and weight observed among children from Nuuk. Overall prevalence of stunting was low with the three cutoffs yielding similar values for height-for-age z-scores. Obesity prevalence was higher among Canadian Inuit children than their Greenland counterparts. Inuit children have stature values consistent with those of the Centers for Disease Control reference and low prevalence of stunting, though geographic variability in mean stature values between Canadian and Greenlandic samples likely reflects differences in both socioeconomic status and genetic admixture. Obesity prevalence is high among both Canadian and Greenland Inuit preschoolers, with children living in the city of Nuuk exhibiting lower obesity prevalence than children living in either Nunavut or Nunavik, Canada or Greenland's towns and villages. Varying obesity prevalence may reflect varying degrees of food security in remote locations as well as the influence of stature and sitting height which have not been well studied in young Inuit children.

Software database creature for investment property measurement according to international standards

Science.gov (United States)

Ponomareva, S. V.; Merzliakova, N. A.

2018-05-01

The article deals with investment property measurement and accounting problems at the international, national and enterprise levels. The need to create the software for investment property measurement according to International Accounting Standards was substantiated. The necessary software functions and the processes were described.

Use of luciferase probes to measure ATP in living cells and animals.

Science.gov (United States)

Morciano, Giampaolo; Sarti, Alba Clara; Marchi, Saverio; Missiroli, Sonia; Falzoni, Simonetta; Raffaghello, Lizzia; Pistoia, Vito; Giorgi, Carlotta; Di Virgilio, Francesco; Pinton, Paolo

2017-08-01

ATP, the energy exchange factor that connects anabolism and catabolism, is required for major reactions and processes that occur in living cells, such as muscle contraction, phosphorylation and active transport. ATP is also the key molecule in extracellular purinergic signaling mechanisms, with an established crucial role in inflammation and several additional disease conditions. Here, we describe detailed protocols to measure the ATP concentration in isolated living cells and animals using luminescence techniques based on targeted luciferase probes. In the presence of magnesium, oxygen and ATP, the protein luciferase catalyzes oxidation of the substrate luciferin, which is associated with light emission. Recombinantly expressed wild-type luciferase is exclusively cytosolic; however, adding specific targeting sequences can modify its cellular localization. Using this strategy, we have constructed luciferase chimeras targeted to the mitochondrial matrix and the outer surface of the plasma membrane. Here, we describe optimized protocols for monitoring ATP concentrations in the cytosol, mitochondrial matrix and pericellular space in living cells via an overall procedure that requires an average of 3 d. In addition, we present a detailed protocol for the in vivo detection of extracellular ATP in mice using luciferase-transfected reporter cells. This latter procedure may require up to 25 d to complete.

A phase-imaging ion-cyclotron-resonance technique for mass measurements of short-lived nuclides

Energy Technology Data Exchange (ETDEWEB)

Eliseev, Sergey; Blaum, Klaus; Doerr, Andreas; Eronen, Tommi; Goncharov, Mikhail; Hoecker, Martin; Ketter, Jochen; Ramirez, Enrique Minaya; Simon, Vanessa [Max-Planck Institute for Nuclear Physics (Germany); Block, Michael [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH (Germany); Chenmarev, Stanislav; Filjanin, Pavel; Nesterenko, Dmitriy; Novikov, Yuri [Petersburg Nuclear Physics Institute (Russian Federation); Droese, Christian; Schweikhard, Lutz [Institute for Physics, Ernst-Moritz-Arndt-University (Germany)

2014-07-01

A novel approach to mass measurements on the sub-ppb level even for short-lived nuclides with half-lives well below one second is presented. It is based on the projection of the radial ion motion in a Penning trap onto a position sensitive detector. Compared to the presently employed time-of-flight ion-cyclotron-resonance technique, the novel approach is 25-times faster and provides a 40-fold gain in resolving power. With the new technique low-lying isomeric states with excitation energy on the 10-keV level can be separated from the ground state. Moreover, the new technique possesses a substantially higher sensitivity since just two ions are sufficient to determine the ion cyclotron frequency. A measurement of the mass difference of singly charged ions of {sup 132}Xe and {sup 131}Xe with an uncertainty of 25 eV has demonstrated the great potential of the new approach.

Cross section measurements for long-lived isotopes and their interest in astrophysics

International Nuclear Information System (INIS)

Dedieu, Jacqueline.

1979-10-01

Cross sections for long-lived radionuclides 10 Be, 26 Al and 36 Cl were measured in Si, Ca, Ti and Fe targets bombarded with 0.15, 1 and 24 GeV protons, by using selective radiochemical separations and low-level counting methods. The results are discussed in terms of the propagation of galactic cosmic radiation. The applicability of the 21 Ne - 26 Al method for calculating the radiation ages of meteorites is criticized [fr

Standardization for oxygen isotope ratio measurement - still an unsolved problem.

Science.gov (United States)

Kornexl; Werner; Gehre

1999-07-01

Numerous organic and inorganic laboratory standards were gathered from nine European and North American laboratories and were analyzed for their delta(18)O values with a new on-line high temperature pyrolysis system that was calibrated using Vienna standard mean ocean water (VSMOW) and standard light Antartic precipitation (SLAP) internationally distributed reference water samples. Especially for organic materials, discrepancies between reported and measured values were high, ranging up to 2 per thousand. The reasons for these discrepancies are discussed and the need for an exact and reliable calibration of existing reference materials, as well as for the establishment of additional organic and inorganic reference materials is stressed. Copyright 1999 John Wiley & Sons, Ltd.

Developmental Indicators of School-Age Children, Living in the Regions with Iodine Deficiency

Directory of Open Access Journals (Sweden)

T.V. Sorokman

2015-03-01

Full Text Available The article provides the results of studying developmental indicators of children living in the areas of iodine deficiency. The basic anthropometric parameters (height and weight, chest circumference were defined, the estimation of intellectual development in 819 children aged 7–16 years living in the regions with mild (472 persons and moderate (347 persons iodine deficiency was carried out. Examined children were standardized by major factors of developmental effect. Anthropometric measurements were carried out by standard methods. Maturity of intellectual functioning was determined using the fragment of R. Cattell test, indicators of mental activity — with proofreading test in conjunction with reading rate test. In all children we have carried out measurement of daily ioduria (Sandell — Kolthoff reaction, palpation of the thyroid gland, determination of its size and structure using ultrasound. It was found that the diet of children is characterized by deficiency of food rich in iodine. Iodized salt was used only by 1 of 50 families. Children living in the regions with moderate iodine deficiency in all age subgroups have lower rates of physical development. A third of children living in areas of iodine deficiency have disharmonic physical development. 13.8 % of children from the regions of iodine deficiency have changes in the majority of the studied cognitive functions. Leading disabilities in the whole group of children were memory impairment and fine motor skills disorders. The level of intellectual maturity, productivity and accuracy of human performance decreases with growing iodine deficiency.

Evaluating standard airborne sound insulation measures in terms of annoyance, loudness, and audibility ratings.

Science.gov (United States)

Park, H K; Bradley, J S

2009-07-01

This paper reports the results of an evaluation of the merits of standard airborne sound insulation measures with respect to subjective ratings of the annoyance and loudness of transmitted sounds. Subjects listened to speech and music sounds modified to represent transmission through 20 different walls with sound transmission class (STC) ratings from 34 to 58. A number of variations in the standard measures were also considered. These included variations in the 8-dB rule for the maximum allowed deficiency in the STC measure as well as variations in the standard 32-dB total allowed deficiency. Several spectrum adaptation terms were considered in combination with weighted sound reduction index (R(w)) values as well as modifications to the range of included frequencies in the standard rating contour. A STC measure without an 8-dB rule and an R(w) rating with a new spectrum adaptation term were better predictors of annoyance and loudness ratings of speech sounds. R(w) ratings with one of two modified C(tr) spectrum adaptation terms were better predictors of annoyance and loudness ratings of transmitted music sounds. Although some measures were much better predictors of responses to one type of sound than were the standard STC and R(w) values, no measure was remarkably improved for predicting annoyance and loudness ratings of both music and speech sounds.

Measuring Physical Activity in Children and Youth Living with Intellectual Disabilities: A Systematic Review

Science.gov (United States)

Hinckson, Erica Aneke; Curtis, Amy

2013-01-01

Accurate assessment of physical activity is necessary in determining levels of physical activity in children living with intellectual disability (ID) and assessing effectiveness of intervention programmes. A systematic review of measures of physical activity in children with ID was undertaken using the PRISMA guidelines. MEDLINE-PubMed, Scopus,…

Kinetics of Antibody Binding to Membranes of Living Bacteria Measured by a Photonic Crystal-Based Biosensor

Directory of Open Access Journals (Sweden)

Ekaterina Rostova

2016-10-01

Full Text Available Optical biosensors based on photonic crystal surface waves (PC SWs offer a possibility to study binding interactions with living cells, overcoming the limitation of rather small evanescent field penetration depth into a sample medium that is characteristic for typical optical biosensors. Besides this, simultaneous excitation of s- and p-polarized surface waves with different penetration depths is realized here, permitting unambiguous separation of surface and volume contributions to the measured signal. PC-based biosensors do not require a bulk signal correction, compared to widely used surface plasmon resonance-based devices. We developed a chitosan-based protocol of PC chip functionalization for bacterial attachment and performed experiments on antibody binding to living bacteria measured in real time by the PCSW-based biosensor. Data analysis reveals specific binding and gives the value of the dissociation constant for monoclonal antibodies (IgG2b against bacterial lipopolysaccharides equal to KD = 6.2 ± 3.4 nM. To our knowledge, this is a first demonstration of antibody-binding kinetics to living bacteria by a label-free optical biosensor.

Measurement of millisecond half-lives of isomeric levels in some nuclei

Energy Technology Data Exchange (ETDEWEB)

Garg, K C; Khurana, C S [Punjabi Univ., Patiala (India). Nuclear Science Labs.

1976-09-01

Half-lives of 2.7, 14.5, 17, 20, 20.4, 44 and 2230 msec, of isomeric levels in /sup 208/Bi, /sup 88/Y, /sup 75/As, /sup 24/Na, /sup 71/Ge, /sup 114/In and /sup 167/Er respectively have been measured, employing on-line irradiation system. These millisecond isomeric levels are produced by 14.7 MeV neutrons through (n,p), (n,..cap alpha..), (n,n') and (n,2n) reactions on natural target samples. A ..gamma..-ray scintillation detector coupled with NTA-512B, 1024 channel analyzer has been used to follow the decay of the millisecond activities. Deflected deuteron beam bursts have been used to reduce the long-time background to initial count ratios in the decay curves to achieve a better accuracy of measurements.

Measuring Protein Synthesis Rate In Living Object Using Flooding Dose And Constant Infusion Methods

OpenAIRE

Ulyarti, Ulyarti

2018-01-01

Constant infusion is a method used for measuring protein synthesis rate in living object which uses low concentration of amino acid tracers. Flooding dose method is another technique used to measure the rate of protein synthesis which uses labelled amino acid together with large amount of unlabelled amino acid.  The latter method was firstly developed to solve the problem in determination of precursor pool arise from constant infusion method.  The objective of this writing is to com...

28 CFR 55.2 - Purpose; standards for measuring compliance.

Science.gov (United States)

2010-07-01

... the satisfaction of the Attorney General or to the U.S. District Court for the District of Columbia...; standards for measuring compliance. (a) The purpose of this part is to set forth the Attorney General's... to conduct elections in the language of certain “language minority groups” in addition to English. (b...

Measurement of glucose utilization by Pseudomonas fluorescens that are free-living and that are attached to surfaces

International Nuclear Information System (INIS)

Fletcher, M.

1986-01-01

The assimilation and respiration of glucose by attached and free-living Pseudomonas fluorescens were compared. The attachment surfaces were polyvinylidene fluoride, polyethylene, and glass. Specific uptake of [ 1 C]glucose was determined after bacterial biomass was measured by (1) microscopic counts or (2) prelabelling of cells by providing [ 3 H]leucine as substrate, followed by dual-labelling scintillation counting. The glucose concentration was 1.4, 3.5, 5.5, 7.6, or 9.7 μM. Glucose assimilation by cells which became detached from the surfaces during incubation with glucose was also measured after the detached cells were collected by filtration. The composition of the substratum had no effect on the amount of glucose assimilated by attached cells. Glucose assimilation by attached cells exceeded that by free-living cells by a factor of between 2 and 5 or more, and respiration of glucose by surface-associated cells was greater than that by free-living bacteria. Glucose assimilation by detached cells was greater than that by attached bacteria. Measurements of biomass by microscopic counts gave more consistent results than those obtained with dual-labelling, but in general, results obtained by both methods were corroborative

Detailed examination of 'standard elementary particle theories' based on measurement with Tristan

International Nuclear Information System (INIS)

Kamae, Tsuneyoshi

1989-01-01

The report discusses possible approaches to detailed analysis of 'standard elementary particle theories' on the basis of measurements made with Tristan. The first section of the report addresses major elementary particles involved in the 'standard theories'. The nature of the gauge particles, leptons, quarks and Higgs particle are briefly outlined. The Higgs particle and top quark have not been discovered, though the Higgs particle is essential in the Weiberg-Salam theory. Another important issue in this field is the cause of the collapse of the CP symmetry. The second section deals with problems which arise in universalizing the concept of the 'standard theories'. What are required to solve these problems include the discovery of supersymmetric particles, discovery of conflicts in the 'standard theories', and accurate determination of fundamental constants used in the 'standard theories' by various different methods. The third and fourth sections address the Weinberg-Salam theory and quantum chromodynamics (QCD). There are four essential parameters for the 'standard theories', three of which are associated with the W-S theory. The mass of the W and Z bosons measured in proton-antiproton collision experiments is compared with that determined by applying the W-S theory to electron-positron experiments. For QCD, it is essential to determine the lambda constant. (N.K.)

38 CFR 21.7670 - Measurement of courses leading to a standard, undergraduate college degree.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Measurement of courses leading to a standard, undergraduate college degree. 21.7670 Section 21.7670 Pensions, Bonuses, and... leading to a standard, undergraduate college degree. Except as provided in § 21.7672, VA will measure a...

Advances in absorbed dose measurement standards at the australian radiation laboratory

International Nuclear Information System (INIS)

Boas, J.F.; Hargrave, N.J.; Huntley, R.B.; Kotler, L.H.; Webb, D.V.; Wise, K.N.

1996-01-01

The applications of ionising radiation in the medical and industrial fields require both an accurate knowledge of the amount of ionising radiation absorbed by the medium in question and the capability of relating this to National and International standards. The most useful measure of the amount of radiation is the absorbed dose which is defined as the energy absorbed per unit mass. For radiotherapy, the reference medium is water, even though the measurement of the absorbed dose to water is not straightforward. Two methods are commonly used to provide calibrations in absorbed dose to water. The first is the calibration of the chamber in terms of exposure in a Cobalt-60 beam, followed by the conversion by a protocol into dose to water in this and higher energy beams. The other route is via the use of a graphite calorimeter as a primary standard device, where the conversion from absorbed dose to graphite to absorbed dose in water is performed either by theoretical means making use of cavity ionisation theory, or by experiment where the graphite calorimeter and secondary standard ionisation chamber are placed at scaled distances from the source of the radiation beam (known as the Dose-Ratio method). Extensive measurements have been made at Cobalt-60 at ARL using both the exposure and absorbed dose to graphite routes. Agreement between the ARL measurements and those based on standards maintained by ANSTO and NPL is within ± 0.3%. Absorbed dose measurements have also been performed at ARL with photon beams of nominal energy 16 and 19 MeV obtained from the ARL linac. The validity of the protocols at high photon energies, the validity of the methods used to convert from absorbed dose in graphite to absorbed dose in water and the validity of the indices used to specify the beams are discussed. Brief mention will also be made of the establishment of a calibration facility for neutron monitors at ARL and of progress in the development of ERP dosimetry

Advances in absorbed dose measurement standards at the australian radiation laboratory

Energy Technology Data Exchange (ETDEWEB)

Boas, J.F.; Hargrave, N.J.; Huntley, R.B.; Kotler, L.H.; Webb, D.V.; Wise, K.N. [Australian Radiation Laboratory, Yallambie, VIC (Australia)

1996-12-31

The applications of ionising radiation in the medical and industrial fields require both an accurate knowledge of the amount of ionising radiation absorbed by the medium in question and the capability of relating this to National and International standards. The most useful measure of the amount of radiation is the absorbed dose which is defined as the energy absorbed per unit mass. For radiotherapy, the reference medium is water, even though the measurement of the absorbed dose to water is not straightforward. Two methods are commonly used to provide calibrations in absorbed dose to water. The first is the calibration of the chamber in terms of exposure in a Cobalt-60 beam, followed by the conversion by a protocol into dose to water in this and higher energy beams. The other route is via the use of a graphite calorimeter as a primary standard device, where the conversion from absorbed dose to graphite to absorbed dose in water is performed either by theoretical means making use of cavity ionisation theory, or by experiment where the graphite calorimeter and secondary standard ionisation chamber are placed at scaled distances from the source of the radiation beam (known as the Dose-Ratio method). Extensive measurements have been made at Cobalt-60 at ARL using both the exposure and absorbed dose to graphite routes. Agreement between the ARL measurements and those based on standards maintained by ANSTO and NPL is within {+-} 0.3%. Absorbed dose measurements have also been performed at ARL with photon beams of nominal energy 16 and 19 MeV obtained from the ARL linac. The validity of the protocols at high photon energies, the validity of the methods used to convert from absorbed dose in graphite to absorbed dose in water and the validity of the indices used to specify the beams are discussed. Brief mention will also be made of the establishment of a calibration facility for neutron monitors at ARL and of progress in the development of ERP dosimetry.

Parallelism measurement for base plate of standard artifact with multiple tactile approaches

Science.gov (United States)

Ye, Xiuling; Zhao, Yan; Wang, Yiwen; Wang, Zhong; Fu, Luhua; Liu, Changjie

2018-01-01

Nowadays, as workpieces become more precise and more specialized which results in more sophisticated structures and higher accuracy for the artifacts, higher requirements have been put forward for measuring accuracy and measuring methods. As an important method to obtain the size of workpieces, coordinate measuring machine (CMM) has been widely used in many industries. In order to achieve the calibration of a self-developed CMM, it is found that the parallelism of the base plate used for fixing the standard artifact is an important factor which affects the measurement accuracy in the process of studying self-made high-precision standard artifact. And aimed to measure the parallelism of the base plate, by using the existing high-precision CMM, gauge blocks, dial gauge and marble platform with the tactile approach, three methods for parallelism measurement of workpieces are employed, and comparisons are made within the measurement results. The results of experiments show that the final accuracy of all the three methods is able to reach micron level and meets the measurement requirements. Simultaneously, these three approaches are suitable for different measurement conditions which provide a basis for rapid and high-precision measurement under different equipment conditions.

A standardization of the physical tests for external irradiation measuring detectors

International Nuclear Information System (INIS)

1977-05-01

This report is the result of a standardization work, realized within the Radioprotection Services of the A.E.C., of the physical tests for dectors measuring external irradiations. Among the various tests mentionned, calibration and the establishment of the relative spectral response are treated in details. As far as calibration is concerned, the standardization refers to: the reference detector, the reference radiation source, the installation and calibration procedure. As for the relative spectral response the standardization refers to: the reference detector, the radiation sources to be used. High flux detectors and those for pulse electromagnetic radiations are also dealt with [fr

Positive psychology outcome measures for family caregivers of people living with dementia: a systematic review

NARCIS (Netherlands)

Stansfeld, J.; Stoner, C.R.; Wenborn, J.; Vernooij-Dassen, M.J.F.J.; Moniz-Cook, E.; Orrell, M.

2017-01-01

BACKGROUND: Family caregivers of people living with dementia can have both positive and negative experiences of caregiving. Despite this, existing outcome measures predominately focus on negative aspects of caregiving such as burden and depression. This review aimed to evaluate the development and

Normal standards for kidney length as measured with US in premature infants

International Nuclear Information System (INIS)

Schlesinger, A.E.; Hedlund, G.L.; Pierson, W.P.; Null, D.M.

1986-01-01

In order to develop normal standards for kidney length in premature infants, the authors measured kidney length by US imaging in 39 (to date) premature infants less than 72 hours old and without known renal disease. Kidney length was compared with four different parameters of body size, including gestational age, birth weight, birth length, and body surface area. Similar standards have been generated previously for normal renal length as measured by US imaging in full-term infants and older children. These standards have proven utility in cases of congenital and acquired disorders that abnormally increase or decrease renal size. Scatter plots of kidney length versus body weight and kidney length versus body surface area conformed well to a logarithmic distribution, with a high correlation coefficient and close-fitting 95% confidence limits (SEE = 2.05)

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers procedures for measuring reaction rates by the activation reaction 58Ni(n,p)58Co. 1.2 This activation reaction is useful for measuring neutrons with energies above approximately 2.1 MeV and for irradiation times up to about 200 days in the absence of high thermal neutron fluence rates (for longer irradiations, see Practice E 261). 1.3 With suitable techniques fission-neutron fluence rates densities above 107 cm−2·s−1 can be determined. 1.4 Detailed procedures for other fast-neutron detectors are referenced in Practice E 261. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note—The burnup corrections were com...

A review of instruments to measure interprofessional collaboration for chronic disease management for community-living older adults.

Science.gov (United States)

Bookey-Bassett, Sue; Markle-Reid, Maureen; McKey, Colleen; Akhtar-Danesh, Noori

2016-01-01

It is acknowledged internationally that chronic disease management (CDM) for community-living older adults (CLOA) is an increasingly complex process. CDM for older adults, who are often living with multiple chronic conditions, requires coordination of various health and social services. Coordination is enabled through interprofessional collaboration (IPC) among individual providers, community organizations, and health sectors. Measuring IPC is complicated given there are multiple conceptualisations and measures of IPC. A literature review of several healthcare, psychological, and social science electronic databases was conducted to locate instruments that measure IPC at the team level and have published evidence of their reliability and validity. Five instruments met the criteria and were critically reviewed to determine their strengths and limitations as they relate to CDM for CLOA. A comparison of the characteristics, psychometric properties, and overall concordance of each instrument with salient attributes of IPC found the Collaborative Practice Assessment Tool to be the most appropriate instrument for measuring IPC for CDM in CLOA.

Analysis and Comparison of Thickness and Bending Measurements from Fabric Touch Tester (FTT and Standard Methods

Directory of Open Access Journals (Sweden)

Musa Atiyyah Binti Haji

2018-03-01

Full Text Available Fabric Touch Tester (FTT is a relatively new device from SDL Atlas to determine touch properties of fabrics. It simultaneously measures 13 touch-related fabric physical properties in four modules that include bending and thickness measurements. This study aims to comparatively analyze the thickness and bending measurements made by the FTT and the common standard methods used in the textile industry. The results obtained with the FTT for 11 different fabrics were compared with that of standard methods. Despite the different measurement principle, a good correlation was found between the two methods used for the assessment of thickness and bending. As FTT is a new tool for textile comfort measurement and no standard yet exists, these findings are essential to determine the reliability of the measurements and how they relate to the well-established standard methods.

Advisory Committee for the calibration standards of ionizing radiation measurement

International Nuclear Information System (INIS)

1979-01-01

The meeting consisted exceptionally of two sessions (in May and December 1977). The members discussed the comparisons of absorbed dose standards and exposure standards which had taken place since 1975 and suggested improvements for future comparisons. A recommendation was made concerning the humidity correction factor to be applied when using cavity chambers and free-air chambers. Further studies were requested concerning the effective point of measurement of ionization chambers. No method was recommended for the statement of uncertainty in calibration certificates. The exposure standards and calibrations in terms of exposure were maintained but it was agreed that other possibilities should be explored. Finally, progress reports of the national laboratories and a description of the recent work carried out at BIPM were presented and appear as appendices to the report [fr

Live-cell Microscopy and Fluorescence-based Measurement of Luminal pH in Intracellular Organelles

Directory of Open Access Journals (Sweden)

Li Ma

2017-08-01

Full Text Available Luminal pH is an important functional feature of intracellular organelles. Acidification of the lumen of organelles such as endosomes, lysosomes, and the Golgi apparatus plays a critical role in fundamental cellular processes. As such, measurement of the luminal pH of these organelles has relevance to both basic research and translational research. At the same time, accurate measurement of intraorganellar pH in living cells can be challenging and may be a limiting hurdle for research in some areas. Here, we describe three powerful methods to measure rigorously the luminal pH of different intracellular organelles, focusing on endosomes, lysosomes, and the Golgi apparatus. The described methods are based on live imaging of pH-sensitive fluorescent probes and include: (1 A protocol based on quantitative, ratiometric measurement of endocytosis of pH-sensitive and pH-insensitive fluorescent conjugates of transferrin; (2 A protocol for the use of proteins tagged with a ratiometric variant of the pH-sensitive intrinsically fluorescent protein pHluorin; and (3 A protocol using the fluorescent dye LysoSensor™. We describe necessary reagents, key procedures, and methods and equipment for data acquisition and analysis. Examples of implementation of the protocols are provided for cultured cells derived from a cancer cell line and for primary cultures of mouse hippocampal neurons. In addition, we present strengths and weaknesses of the different described intraorganellar pH measurement methods. These protocols are likely to be of benefit to many researchers, from basic scientists to those conducting translational research with a focus on diseases in patient-derived cells.

Sensor monitoring to measure and support daily functioning for independently living older people: A systematic review and road map for further development

NARCIS (Netherlands)

Pol, M.C.; Poerbodipoero, S.; Robben, S.; Daams, J.; van Hartingsveldt, M.; de Vos, R.; de Rooij, S.E.; Kröse, B.; Buurman, B.M.

2013-01-01

Objectives To study sensor monitoring (use of a sensor network placed in the home environment to observe individuals' daily functioning (activities of daily living and instrumental activities of daily living)) as a method to measure and support daily functioning for older people living independently

Sensor monitoring to measure and support daily functioning for independently living older people: a systematic review and road map for further development

NARCIS (Netherlands)

Pol, Margriet C.; Poerbodipoero, Soemitro; Robben, Saskia; Daams, Joost; van Hartingsveldt, Margo; de Vos, Rien; de Rooij, Sophia E.; Kröse, Ben; Buurman, Bianca M.

2013-01-01

To study sensor monitoring (use of a sensor network placed in the home environment to observe individuals' daily functioning (activities of daily living and instrumental activities of daily living)) as a method to measure and support daily functioning for older people living independently at home.

Double standards with radioactive waste

International Nuclear Information System (INIS)

Parkinson, A.

2002-01-01

The author claims that whether it is short-lived waste from Commonwealth facilities, long-lived plutonium waste from an atomic bomb test site on Aboriginal land, or reactor waste from Lucas Heights, the Australian government applies double standards to suit its own agenda

International standards for phytosanitary measures (ISPM), publication No. 15

CERN Multimedia

Tom Wegelius

2006-01-01

GUIDELINES FOR REGULATING WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE SCOPE This standard describes phytosanitary measures to reduce the risk of introduction and/or spread of quarantine pests associated with wood packaging material (including dunnage), made of coniferous and non-coniferous raw wood, in use in international trade. For more information, contact the Shipping Service (FI-LS-SH) at 79947. Table of guidelines

A multiplexed method for kinetic measurements of apoptosis and proliferation using live-content imaging.

Science.gov (United States)

Artymovich, Katherine; Appledorn, Daniel M

2015-01-01

In vitro cell proliferation and apoptosis assays are widely used to study cancer cell biology. Commonly used methodologies are however performed at a single, user-defined endpoint. We describe a kinetic multiplex assay incorporating the CellPlayer(TM) NucLight Red reagent to measure proliferation and the CellPlayer(TM) Caspase-3/7 reagent to measure apoptosis using the two-color, live-content imaging platform, IncuCyte(TM) ZOOM. High-definition phase-contrast images provide an additional qualitative validation of cell death based on morphological characteristics. The kinetic data generated using this strategy can be used to derive informed pharmacology measurements to screen potential cancer therapeutics.

How Much Can Non-industry Standard Measurement Methodologies Benefit Methane Reduction Programs?

Science.gov (United States)

Risk, D. A.; O'Connell, L.; Atherton, E.

2017-12-01

In recent years, energy sector methane emissions have been recorded in large part by applying modern non-industry-standard techniques. Industry may lack the regulatory flexibility to use such techniques, or in some cases may not understand the possible associated economic advantage. As progressive jurisdictions move from estimation and towards routine measurement, the research community should provide guidance to help regulators and companies measure more effectively, and economically if possible. In this study, we outline a modelling experiment in which we explore the integration of non-industry-standard measurement techniques as part of a generalized compliance measurement program. The study was not intended to be exhaustive, or to recommend particular combinations, but instead to explore the inter-relationships between methodologies, development type, compliance practice. We first defined the role, applicable scale, detection limits, working distances, and approximate deployment cost of several measurement methodologies. We then considered a variety of development types differing mainly in footprint, density, and emissions "profile". Using a Monte Carlo approach, we evaluated the effect of these various factors on the cost and confidence of the compliance measurement program. We found that when added individually, some of the research techniques were indeed able to deliver an improvement in cost and/or confidence when used alongside industry-standard Optical Gas Imaging. When applied in combination, the ideal fraction of each measurement technique depended on development type, emission profile, and whether confidence or cost was more important. Results suggest that measurement cost and confidence could be improved if energy companies exploited a wider range of measurement techniques, and in a manner tailored to each development. In the short-term, combining clear scientific guidance with economic information could benefit immediate mitigation efforts over

Protocol of the COSMIN study: COnsensus-based Standards for the selection of health Measurement INstruments

Directory of Open Access Journals (Sweden)

Patrick DL

2006-01-01

Full Text Available Abstract Background Choosing an adequate measurement instrument depends on the proposed use of the instrument, the concept to be measured, the measurement properties (e.g. internal consistency, reproducibility, content and construct validity, responsiveness, and interpretability, the requirements, the burden for subjects, and costs of the available instruments. As far as measurement properties are concerned, there are no sufficiently specific standards for the evaluation of measurement properties of instruments to measure health status, and also no explicit criteria for what constitutes good measurement properties. In this paper we describe the protocol for the COSMIN study, the objective of which is to develop a checklist that contains COnsensus-based Standards for the selection of health Measurement INstruments, including explicit criteria for satisfying these standards. We will focus on evaluative health related patient-reported outcomes (HR-PROs, i.e. patient-reported health measurement instruments used in a longitudinal design as an outcome measure, excluding health care related PROs, such as satisfaction with care or adherence. The COSMIN standards will be made available in the form of an easily applicable checklist. Method An international Delphi study will be performed to reach consensus on which and how measurement properties should be assessed, and on criteria for good measurement properties. Two sources of input will be used for the Delphi study: (1 a systematic review of properties, standards and criteria of measurement properties found in systematic reviews of measurement instruments, and (2 an additional literature search of methodological articles presenting a comprehensive checklist of standards and criteria. The Delphi study will consist of four (written Delphi rounds, with approximately 30 expert panel members with different backgrounds in clinical medicine, biostatistics, psychology, and epidemiology. The final checklist will

Reference value standards and primary standards for pH measurements in D2O and aqueous-organic solvent mixtures: new accessions and assessments

International Nuclear Information System (INIS)

Mussini, P.R.; Mussini, T.; Rondinini, S.

1997-01-01

Recommended Reference Value Standards based on the potassium hydro-genphthalate buffer at various temperatures are reported for pH measurements in various binary solvent mixtures of water with eight organic solvents: methanol, ethanol, 2-propanol, 1,2-ethanediol, 2-methoxyethanol (''methylcellosolve''), acetonitrile, 1,4-dioxane, and dimethyl sulfoxide, together with Reference Value Standard based on the potassium deuterium phthalate buffer for pD measurements in D 2 O. In addition are reported Primary Standards for pH based on numerous buffers in various binary solvent mixtures of water with methanol, ethanol, and dimethyl sulfoxide, together with Primary Standards for pD in D 2 O based on the citrate, phosphate and carbonate buffers. (author)

Development of a Primary Standard for Calibration of [18F]FDG Activity Measurement Systems

International Nuclear Information System (INIS)

Capogni, M; Felice, P De; Fazio, A; Simonelli, F; Abbas, K

2006-01-01

The 18 F national primary standard was developed by the INMRI-ENEA using the 4πβ Liquid Scintillation Spectrometry Method with 3 H-Standard Efficiency Tracing. Measurements were performed at JRCIspra under a scientific collaboration between the Institute for Health and Consumer Production, the Amersham Health and the National Institute for Occupational Safety and Prevention (ISPESL). The goal of the work was to calibrate, with minimum uncertainty, the INMRI-ENEA transfer standard portable well-type ionisation chamber as well as other JRC-Ispra and Amersham Health reference Ionising Chambers used for FDG activity measurement

Microscopic integral cross section measurements in the Be(d,n) neutron spectrum for applications in neutron dosimetry, radiation damage and the production of long-lived radionuclides

International Nuclear Information System (INIS)

Smith, D.L.; Meadows, J.W.; Greenwood, L.R.

1990-01-01

Integral neutron-reaction cross sections have been measured, relative to the U-238 neutron fission cross-section standard, for 27 reactions which are of contemporary interest in various nuclear applications (e.g., fast-neutron dosimetry, neutron radiation damage and the production of long-lived activities which affect nuclear waste disposal). The neutron radiation field employed in this study was produced by bombarding a thick Be-metal target with 7-MeV deuterons from an accelerator. The experimental results are reported along with detailed information on the associated measurement uncertainties and their correlations. These data are also compared with corresponding calculated values, based on contemporary knowledge of the differential cross sections and of the Be(d,n) neutron spectrum. Some conclusions are reached on the utility of this procedure for neutron-reaction data testing

Wavelength selection method with standard deviation: application to pulse oximetry.

Science.gov (United States)

Vazquez-Jaccaud, Camille; Paez, Gonzalo; Strojnik, Marija

2011-07-01

Near-infrared spectroscopy provides useful biological information after the radiation has penetrated through the tissue, within the therapeutic window. One of the significant shortcomings of the current applications of spectroscopic techniques to a live subject is that the subject may be uncooperative and the sample undergoes significant temporal variations, due to his health status that, from radiometric point of view, introduce measurement noise. We describe a novel wavelength selection method for monitoring, based on a standard deviation map, that allows low-noise sensitivity. It may be used with spectral transillumination, transmission, or reflection signals, including those corrupted by noise and unavoidable temporal effects. We apply it to the selection of two wavelengths for the case of pulse oximetry. Using spectroscopic data, we generate a map of standard deviation that we propose as a figure-of-merit in the presence of the noise introduced by the living subject. Even in the presence of diverse sources of noise, we identify four wavelength domains with standard deviation, minimally sensitive to temporal noise, and two wavelengths domains with low sensitivity to temporal noise.

Meaningful interpretation of subdiffusive measurements in living cells (crowded environment) by fluorescence fluctuation microscopy.

Science.gov (United States)

Baumann, Gerd; Place, Robert F; Földes-Papp, Zeno

2010-08-01

In living cell or its nucleus, the motions of molecules are complicated due to the large crowding and expected heterogeneity of the intracellular environment. Randomness in cellular systems can be either spatial (anomalous) or temporal (heterogeneous). In order to separate both processes, we introduce anomalous random walks on fractals that represented crowded environments. We report the use of numerical simulation and experimental data of single-molecule detection by fluorescence fluctuation microscopy for detecting resolution limits of different mobile fractions in crowded environment of living cells. We simulate the time scale behavior of diffusion times tau(D)(tau) for one component, e.g. the fast mobile fraction, and a second component, e.g. the slow mobile fraction. The less the anomalous exponent alpha the higher the geometric crowding of the underlying structure of motion that is quantified by the ratio of the Hausdorff dimension and the walk exponent d(f)/d(w) and specific for the type of crowding generator used. The simulated diffusion time decreases for smaller values of alpha # 1 but increases for a larger time scale tau at a given value of alpha # 1. The effect of translational anomalous motion is substantially greater if alpha differs much from 1. An alpha value close to 1 contributes little to the time dependence of subdiffusive motions. Thus, quantitative determination of molecular weights from measured diffusion times and apparent diffusion coefficients, respectively, in temporal auto- and crosscorrelation analyses and from time-dependent fluorescence imaging data are difficult to interpret and biased in crowded environments of living cells and their cellular compartments; anomalous dynamics on different time scales tau must be coupled with the quantitative analysis of how experimental parameters change with predictions from simulated subdiffusive dynamics of molecular motions and mechanistic models. We first demonstrate that the crowding exponent

Standard practice for calculation of corrosion rates and related information from electrochemical measurements

CERN Document Server

American Society for Testing and Materials. Philadelphia

1989-01-01

1.1 This practice covers the providing of guidance in converting the results of electrochemical measurements to rates of uniform corrosion. Calculation methods for converting corrosion current density values to either mass loss rates or average penetration rates are given for most engineering alloys. In addition, some guidelines for converting polarization resistance values to corrosion rates are provided. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Basic live sound reinforcement a practical guide for starting live audio

CERN Document Server

Biederman, Raven

2013-01-01

Access and interpret manufacturer spec information, find shortcuts for plotting measure and test equations, and learn how to begin your journey towards becoming a live sound professional. Land and perform your first live sound gigs with this guide that gives you just the right amount of information. Don't get bogged down in details intended for complex and expensive equipment and Madison Square Garden-sized venues. Basic Live Sound Reinforcement is a handbook for audio engineers and live sound enthusiasts performing in small venues from one-mike coffee shops to clubs. With their combined ye

Relationship Between Functional Mobility and Balance and Dependency in Activity of Daily Living in Elderly After “Hip Arthroplasty”

Directory of Open Access Journals (Sweden)

Gholam Hassan Mirzaie

2013-01-01

Full Text Available Objectives: The purpose of this study was to investigate correlation between functional mobility with balance and dependency in activity of daily living in elderly after “hip arthroplasty” (HA and its comparison with healthy subjects. Methods & Materials: The current cross-sectional study was done on 15 patients with age mean and standard deviation (72±9.6 with hip osteoarthritis 6 months after “hip arthroplasty” (HA and 15 healthy subjects with age mean and standard deviation (72.7±1.4 as control group. Patient group was assigned with non- probability convenient sampling and control group selected with matched assignment. Functional mobility measured with Timed Up & Go Test (TUG, functional balance with Functional Reach (FR and Berg Balance Scale (BBS and dependency in activity of daily living measured with Modified Barthel Index (MBI. Pearsons correlation coefficient used for stastistical analysis. Results: Results of this study indicated significantly and stronge correlation between functional mobility and balance and dependency in activity of daily living in patient group (r>0.50. Also medium correlation existed between functional mobility and balance with dependency in activity of daily living in control group (r>0.30. Conclusion: Functional mobility and balance and dependency in activity of daily living in the elderly who had HA showed significant positive correlation. In addition correlation between functional mobility and balance and dependency in activity of daily living in patient group is better and higher than healthy group.

Standardized measurement of quality of life after incisional hernia repair

DEFF Research Database (Denmark)

Jensen, Kristian K; Henriksen, Nadia A; Harling, Henrik

2014-01-01

repair. The aim of this systematic review was to analyze existing standardized methods to measure quality of life after incisional hernia repair. DATA SOURCES: A PubMed and Embase search was carried out together with a cross-reference search of eligible papers, giving a total of 26 included studies...

Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method describes the measurement of heat transfer rate using a thermal capacitance-type calorimeter which assumes one-dimensional heat conduction into a cylindrical piece of material (slug) with known physical properties. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Note 1—For information see Test Methods E 285, E 422, E 458, E 459, and E 511.

Study on AC loss measurements of HTS power cable for standardizing

Science.gov (United States)

Mukoyama, Shinichi; Amemiya, Naoyuki; Watanabe, Kazuo; Iijima, Yasuhiro; Mido, Nobuhiro; Masuda, Takao; Morimura, Toshiya; Oya, Masayoshi; Nakano, Tetsutaro; Yamamoto, Kiyoshi

2017-09-01

High-temperature superconducting power cables (HTS cables) have been developed for more than 20 years. In addition of the cable developments, the test methods of the HTS cables have been discussed and proposed in many laboratories and companies. Recently the test methods of the HTS cables is required to standardize and to common in the world. CIGRE made the working group (B1-31) for the discussion of the test methods of the HTS cables as a power cable, and published the recommendation of the test method. Additionally, IEC TC20 submitted the New Work Item Proposal (NP) based on the recommendation of CIGRE this year, IEC TC20 and IEC TC90 started the standardization work on Testing of HTS AC cables. However, the individual test method that used to measure a performance of HTS cables hasn’t been established as world’s common methods. The AC loss is one of the most important properties to disseminate low loss and economical efficient HTS cables in the world. We regard to establish the method of the AC loss measurements in rational and in high accuracy. Japan is at a leading position in the AC loss study, because Japanese researchers have studied on the AC loss technically and scientifically, and also developed the effective technologies for the AC loss reduction. The JP domestic commission of TC90 made a working team to discussion the methods of the AC loss measurements for aiming an international standard finally. This paper reports about the AC loss measurement of two type of the HTS conductors, such as a HTS conductor without a HTS shield and a HTS conductor with a HTS shield. The AC loss measurement method is suggested by the electrical method..

38 CFR 21.7672 - Measurement of courses not leading to a standard college degree.

Science.gov (United States)

2010-07-01

... not leading to a standard college degree. 21.7672 Section 21.7672 Pensions, Bonuses, and Veterans... Assistance for Members of the Selected Reserve Course Assessment § 21.7672 Measurement of courses not leading to a standard college degree. (a) Overview. (1) Courses not leading to a standard college degree may...

Measurement of polybrominated diphenyl ethers in environmental matrix standard reference materials

Energy Technology Data Exchange (ETDEWEB)

Stapleton, H.; Schantz, M.; Wise, S. (National Institute of Standards and Technology)

2004-09-15

Polybrominated diphenyl ethers (PBDEs) are a class of emerging contaminants of concern as many studies have now demonstrated that these compounds are bioaccumulative, persistent and increasing in concentration in the environment. PBDEs are being detected in almost every environmental sample examined, and they have even been measured in samples collected in the Arctic, further demonstrating their persistence and potential for long range transport. More and more studies are continuing to examine the fate and transport of these flame retardant compounds in environmental samples and as such, reference materials are needed to provide quality control on these measurements. The National Institute of Standards and Technology (NIST) supports a national Standard Reference Material (SRM) program for measurement of organic contaminants such as PCBs, PAHs and chlorinated pesticides in environmental matrices. This current study was undertaken to provide reference measurements for PBDEs in selected SRMs that are currently used by various laboratories throughout the United States. These SRMs include matrices such as marine mammal blubber, lake trout tissue, mussel tissue, sediment, house dust and human serum. We report here reference values for 22 PBDE congeners that have been quantified in these seven types of SRMs.

Evaluating the Feasibility and Intercorrelation of Measurements on the Functioning of Residents Living in Scandinavian Nursing Homes

DEFF Research Database (Denmark)

Andresen, Mette; Frändin, Kerstin; Grönstedt, Helena

2010-01-01

Background. The purpose of this study is to investigate the feasibility of measurements of muscle strength, balance, cognitive function, mobility, activities of daily living (ADL), and physical activity for use in a Scandinavian nursing home population and to examine intercorrelations between the......, functional independence measure, physiotherapy clinical outcome variables, and the Nursing Home Life Space...

Social Security cost-of-living adjustments and the Consumer Price Index.

Science.gov (United States)

Burdick, Clark; Fisher, Lynn

2007-01-01

OASDI benefits are indexed for inflation to protect beneficiaries from the loss of purchasing power implied by inflation. In the absence of such indexing, the purchasing power of Social Security benefits would be eroded as rising prices raise the cost of living. By statute, cost-of-living adjustments (COLAs) for Social Security benefits are calculated using the Bureau of Labor Statistics (BLS) Consumer Price Index for Urban Wage Earners and Clerical Workers (CPI-W). Some argue that this index does not accurately reflect the inflation experienced by the elderly population and should be changed to an elderly-specific price index such as the Experimental Consumer Price Index for Americans 62 Years of Age and Older, often referred to as the Consumer Price Index for the Elderly (CPI-E). Others argue that the measure of inflation underlying the COLA is technically biased, causing it to overestimate changes in the cost of living. This argument implies that current COLAs tend to increase, rather than merely maintain, the purchasing power of benefits over time. Potential bias in the CPI as a cost-of-living index arises from a number of sources, including incomplete accounting for the ability of consumers to substitute goods or change purchasing outlets in response to relative price changes. The BLS has constructed a new index called the Chained Consumer Price Index for All Urban Consumers (C-CPI-U) that better accounts for those consumer adjustments. Price indexes are not true cost-of-living indexes, but approximations of cost-of-living indexes (COLI). The Bureau of Labor Statistics (2006a) explains the difference between the two: As it pertains to the CPI, the COLI for the current month is based on the answer to the following question: "What is the cost, at this month ' market prices, of achieving the standard of living actually attained in the base period?" This cost is a hypothetical expenditure-the lowest expenditure level necessary at this month's prices to achieve the

Distinguishing enhancing from nonenhancing renal masses with dual-source dual-energy CT: iodine quantification versus standard enhancement measurements.

Science.gov (United States)

Ascenti, Giorgio; Mileto, Achille; Krauss, Bernhard; Gaeta, Michele; Blandino, Alfredo; Scribano, Emanuele; Settineri, Nicola; Mazziotti, Silvio

2013-08-01

To compare the diagnostic accuracy of iodine quantification and standard enhancement measurements in distinguishing enhancing from nonenhancing renal masses. The Institutional Review Board approved this retrospective study conducted from data found in institutional patient databases and archives. Seventy-two renal masses were characterised as enhancing or nonenhancing using standard enhancement measurements (in HU) and iodine quantification (in mg/ml). Sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV) of standard enhancement measurements and iodine quantification were calculated from χ (2) tests of contingency with histopathology or imaging follow-up as the reference standard. Difference in accuracy was assessed by means of McNemar analysis. Sensitivity, specificity, PPV, NPV and diagnostic accuracy for standard enhancement measurements and iodine quantification were 77.7 %, 100 %, 100 %, 81.8 %, 89 % and 100 %, 94.4 %, 94.7, 100 % and 97 %, respectively. The McNemar analysis showed that the accuracy of iodine quantification was significantly better (P < 0.001) than that of standard enhancement measurements. Compared with standard enhancement measurements, whole-tumour iodine quantification is more accurate in distinguishing enhancing from nonenhancing renal masses. • Enhancement of renal lesions is important when differentiating benign from malignant tumours. • Dual-energy CT offers measurement of iodine uptake rather than mere enhancement values. • Whole-tumour iodine quantification seems more accurate than standard CT enhancement measurements.

Real-Time Intracellular Measurements of ROS and RNS in Living Cells with Single Core-Shell Nanowire Electrodes.

Science.gov (United States)

Zhang, Xin-Wei; Qiu, Quan-Fa; Jiang, Hong; Zhang, Fu-Li; Liu, Yan-Lin; Amatore, Christian; Huang, Wei-Hua

2017-10-09

Nanoelectrodes allow precise and quantitative measurements of important biological processes at the single living-cell level in real time. Cylindrical nanowire electrodes (NWEs) required for intracellular measurements create a great challenge for achieving excellent electrochemical and mechanical performances. Herein, we present a facile and robust solution to this problem based on a unique SiC-core-shell design to produce cylindrical NWEs with superior mechanical toughness provided by the SiC nano-core and an excellent electrochemical performance provided by the ultrathin carbon shell that can be used as such or platinized. The use of such NWEs for biological applications is illustrated by the first quantitative measurements of ROS/RNS in individual phagolysosomes of living macrophages. As the shell material can be varied to meet any specific detection purpose, this work opens up new opportunities to monitor quantitatively biological functions occurring inside cells and their organelles. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A comparison of oxygen saturation measurements obtained from a 'blue sensor' with a standard sensor.

Science.gov (United States)

Mawson, Isabel E; Dawson, Jennifer A; Donath, Susan M; Davis, Peter G

2011-10-01

The study aims to investigate pulse oximetry measurements from a 'blue' pulse oximeter sensor against measurements from a 'standard' pulse oximeter sensor in newly born infants. Immediately after birth, both sensors were attached to the infant, one to each foot. SpO₂ measurements were recorded simultaneously from each sensor for 10 min. Agreement between pairs of SpO₂ measurements were calculated using Bland-Altman analysis. Thirty-one infants were studied. There was good correlation between simultaneous SpO₂ measurements from both sensors (r² = 0.75). However, the mean difference between 'blue' and 'standard' sensors was -1.6%, with wide 95% limits of agreement +18.4 to -21.6%. The range of mean difference between sensors from each infant ranged from -20 to +20. The mean difference between the blue and standard sensor SpO₂ measurements is not clinically important. © 2011 The Authors. Journal of Paediatrics and Child Health © 2011 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

{sup 226}Ra activity standardization by 4παβ(LS)-γ(NaI-Tl) anticoincidence counting

Energy Technology Data Exchange (ETDEWEB)

Silva, C.J. da; Poledna, R.; Santos, A.R.L.; Gomes, R.S., E-mail: carlos@ird.gov.br [Instituto de Radioproteção e Dosimetria (LNMRI/IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Laboratório Nacional de Metrologia das Radiações Ionizantes

2017-07-01

From a commercial supplier a solution containing {sup 226}Ra has been standardized at National Laboratory for Ionizing Radiation Metrology (LNMRI) for the first time using Liquid scintillation based measurement. The measurement methods are 4παβ-γ live-timed anticoincidence counting. The results obtained by anticoincidence counting were adopted as reference value and its combined uncertainty was 0.94 %. The agreement of this reference value with reference system with ionization chamber was 0.56 %. This standardization was made in order to reduce the uncertainty in {sup 226}Ra measurement in Brazil. (author)

Development of an outdoor MRI system for measuring flow in a living tree

Science.gov (United States)

Nagata, Akiyoshi; Kose, Katsumi; Terada, Yasuhiko

2016-04-01

An outdoor MRI system for noninvasive, long-term measurements of sap flow in a living tree in its natural environment has been developed. An open-access, 0.2 T permanent magnet with a 160 mm gap was combined with a radiofrequency probe, planar gradient coils, electromagnetic shielding, several electrical units, and a waterproofing box. Two-dimensional cross-sectional images were acquired for a ring-porous tree, and the anatomical structures, including xylem and phloem, were identified. The MRI flow measurements demonstrated the diurnal changes in flow velocity in the stem on a per-pixel basis. These results demonstrate that our outdoor MRI system is a powerful tool for studies of water transport in outdoor trees.

Design Of Measurements For Evaluating Readiness Of Technoware Components To Meet The Required Standard Of Products

Science.gov (United States)

Fauzi, Ilham; Muharram Hasby, Fariz; Irianto, Dradjad

2018-03-01

Although government is able to make mandatory standards that must be obeyed by the industry, the respective industries themselves often have difficulties to fulfil the requirements described in those standards. This is especially true in many small and medium sized enterprises that lack the required capital to invest in standard-compliant equipment and machineries. This study aims to develop a set of measurement tools for evaluating the level of readiness of production technology with respect to the requirements of a product standard based on the quality function deployment (QFD) method. By combining the QFD methodology, UNESCAP Technometric model [9] and Analytic Hierarchy Process (AHP), this model is used to measure a firm’s capability to fulfill government standard in the toy making industry. Expert opinions from both the governmental officers responsible for setting and implementing standards and the industry practitioners responsible for managing manufacturing processes are collected and processed to find out the technological capabilities that should be improved by the firm to fulfill the existing standard. This study showed that the proposed model can be used successfully to measure the gap between the requirements of the standard and the readiness of technoware technological component in a particular firm.

Monitoring system for accuracy and reliability characteristics of standard temperature measurements in WWER-440 reactors

International Nuclear Information System (INIS)

Stanc, S.; Repa, M.

2001-01-01

Description of a monitoring system for accuracy and reliability characteristics of standard temperature measurements in WWER-440 reactors and benefits obtained from its use are shown in the presentation. As standard reactor temperature measurement, coolant temperature measurement at fuel assembly outlets and in loops, entered into the In-Reactor Control System , are considered. Such systems have been implemented at two V-230 reactors and are under implementation at other four V-213 reactors. (Authors)

Standardization in dust emission measurement; Mesure des emissions de poussieres normalisation

Energy Technology Data Exchange (ETDEWEB)

Perret, R. [INERIS, 60 - Verneuil-en-Halatte, (France)

1996-12-31

The European Standardization Committee (CEN TC 264WG5) is developing a new reference method for measuring particulate emissions, suitable for concentrations inferior to 20 mg/m{sup 3} and especially for concentrations around 5 mg/m{sup 3}; the measuring method should be applicable to waste incinerator effluents and more generally to industrial effluents. Testing protocols and data analysis have been examined and repeatability and reproducibility issues are discussed

222Rn and short live progeny in atmospheric environment. Origin and measurement techniques

International Nuclear Information System (INIS)

Charuau, J.; Labed, V.; Robe, M.C.; Thevenin, J.C.; Fazileabasse, J.; Klein, D.; Heleschewitz, H.; Tymen, G.; Aubert, C.; Gibaud, C.

1996-01-01

Radon is the main source of man's exposure to natural ionizing radiation. This document summarizes the general knowledge of the origin of radon 222 and its development in various air environments. It presents several methods for measuring radon activity concentration and the potential alpha energy from its short life daughters. It has been prepared by the commission M60-3, of the Office for the standardization of nuclear equipments (BNEN in French) under the French association for standardization (AFNOR in French). (author)

Optimising the Number of Replicate- Versus Standard Measurements for Carbonate Clumped Isotope Thermometry

Science.gov (United States)

Kocken, I.; Ziegler, M.

2017-12-01

Clumped isotope measurements on carbonates are a quickly developing and promising palaeothermometry proxy1-3. Developments in the field have brought down the necessary sample amount and improved the precision and accuracy of the measurements. The developments have included inter-laboratory comparison and the introduction of an absolute reference frame4, determination of acid fractionation effects5, correction for the pressure baseline6, as well as improved temperature calibrations2, and most recently new approaches to improve efficiency in terms of sample gas usage7. However, a large-scale application of clumped isotope thermometry is still hampered by required large sample amounts, but also the time-consuming analysis. In general, a lot of time is goes into the measurement of standards. Here we present a study on the optimal ratio between standard- and sample measurements using the Kiel Carbonate Device method. We also consider the optimal initial signal intensity. We analyse ETH-standard measurements from several months to determine the measurement regime with the highest precision and optimised measurement time management.References 1. Eiler, J. M. Earth Planet. Sci. Lett. 262, 309-327 (2007).2. Kelson, J. R., et al. Geochim. Cosmochim. Acta 197, 104-131 (2017).3. Kele, S. et al. Geochim. Cosmochim. Acta 168, 172-192 (2015).4. Dennis, K. J. et al. Geochim. Cosmochim. Acta 75, 7117-7131 (2011).5. Müller, I. A. et al. Chem. Geol. 449, 1-14 (2017).6. Meckler, A. N. et al. Rapid Commun. Mass Spectrom. 28, 1705-1715 (2014).7. Hu, B. et al. Rapid Commun. Mass Spectrom. 28, 1413-1425 (2014).

Searches with long-lived or unusual signatures

CERN Document Server

Haug, S; The ATLAS collaboration

2013-01-01

We present recent ATLAS and CMS results from searches with long-lived and unusual signatures. They are based on analysis of LHC proton-proton collisions at center of mass energies at 7 and 8 TeV. Long-lived and heavy particles may cause peculiar signatures in the detectors, but are in several Standard Model extensions well motivated.

The Significance of Sexuality and Intimacy in the Lives of Older African Americans With HIV/AIDS

Science.gov (United States)

Nevedal, Andrea; Sankar, Andrea

2016-01-01

Purpose of the Study: Aging and HIV/AIDS research focuses primarily on standardized clinical, social, and behavioral measures, leaving unanswered questions about how this chronic and stigmatizing condition affects life course expectations and the meaning of aging with the disease. Utilizing Gaylene Becker’s (1997) life course disruption theory, we explored older African Americans’ experiences of living with HIV/AIDS. Design and Methods: A purposive sample (N = 43) of seropositive African Americans aged 50 and older was selected from a parent study. Thirteen participants completed one semi-structured in-depth interview on life course expectations and experiences of living with HIV/AIDS. Interview transcripts were analyzed using standard qualitative coding and thematic analysis. Results: Responding to broad, open-ended questions about the impact of HIV on life course expectations, participants emphasized how HIV limited their ability to experience sexuality and intimacy. Two major themes emerged, damaged sexuality and constrained intimacy. Implications: Older African Americans’ discussions of living with HIV focused on the importance of and the challenges to sexuality and intimacy. Researchers and clinicians should be attentive to significant and ongoing HIV-related challenges to sexuality and intimacy facing older African Americans living with HIV/AIDS. PMID:26035889

The role of batak tobanese women as parrengge-rengge to enhance the living standards of family at Pajak Horas in Pematang Siantar city

Science.gov (United States)

Nurjannah; Dewi, R.

2018-03-01

This research aims to find out the role of Batak Tobanese Women as Parrengge-rengge (trading with small capital) to enhance the living standards of the family; an overview of the trading conducted by Parrengge-rengge and of the social relationships of Batak Tobanese women as parrengge-rengge at Pajak Horas in Pematang Siantar City. From the data resulted from the field research, it was found that the factor that encouraged Batak Tobanese women to be Parrengge-rengge is the economic pressure to improve family income, the work requirements of the informal sector that are relatively moderate and easy compared by the formal one, and their low educational background. Parrengge-rengge at Pajak Horas market in Pematang Siantar City plays dual roles; namely as Mother and traders. Batak Tobanese women play double jobs as parrengge-rengge because of economic pressure to improve their living standards and family income. They cannot do this job all the time for some reasons. Sometimes, they have to stop working for a while. Many reasons make them quit from “marrengge-rengge” such as running out of capital, getting older or some other reasons that cause them not to be able to keep working as Parrengge-rengge at Pajak Horas in Pematang Siantar City.

Application of simulated standard spectra in natural radioactivity measurements using gamma spectrometry

International Nuclear Information System (INIS)

Narayani, K.; Pant, A.D.; Bhosle, Nitin; Anilkumar, S.; Singh, Rajvir; Pradeepkumar, K.S.

2014-01-01

Gamma ray spectrometry is one of the well known analytical techniques for environmental radioactivity measurements. Gamma spectrometer based on NaI(Tl) scintillation detectors is very popular since it offers high efficiency, low cost and case in handling. The poor energy resolution of the NaI(TI) detector is the major disadvantage making tile analysis of complex gamma ray spectra difficult. Least square method or the full spectrum analysis method is widely used for the analysis of complex spectra from scintillation detectors. The main requirement of this method is that the individual standard spectra of all nuclides expected in the complex spectrum in the same measurement geometry must be available. It is not always possible and feasible to have all the standards of nuclides in the desired geometry. A methodology based on the use of simulated standard spectra generated by Monte Carlo technique was proposed for analysis of complex spectra of nuclides. In the present work, for the analysis of 238 U, 233 Th and 40 K in soil samples, the same methodology was applied by using the simulated standard spectra in soil matrix. The details of the simulation method and results analysis of 238 U, 232 Th and 40 K in environmental samples are discussed in this paper

Raman tweezers spectroscopy of live, single red and white blood cells.

Directory of Open Access Journals (Sweden)

Aseefhali Bankapur

Full Text Available An optical trap has been combined with a Raman spectrometer to make high-resolution measurements of Raman spectra of optically-immobilized, single, live red (RBC and white blood cells (WBC under physiological conditions. Tightly-focused, near infrared wavelength light (1064 nm is utilized for trapping of single cells and 785 nm light is used for Raman excitation at low levels of incident power (few mW. Raman spectra of RBC recorded using this high-sensitivity, dual-wavelength apparatus has enabled identification of several additional lines; the hitherto-unreported lines originate purely from hemoglobin molecules. Raman spectra of single granulocytes and lymphocytes are interpreted on the basis of standard protein and nucleic acid vibrational spectroscopy data. The richness of the measured spectrum illustrates that Raman studies of live cells in suspension are more informative than conventional micro-Raman studies where the cells are chemically bound to a glass cover slip.

An International Standard Set of Patient-Centered Outcome Measures After Stroke

NARCIS (Netherlands)

Salinas, J. (Joel); Sprinkhuizen, S.M. (Sara M.); Ackerson, T. (Teri); Bernhardt, J. (Julie); Davie, C. (Charlie); George, M.G. (Mary G.); Gething, S. (Stephanie); Kelly, A.G. (Adam G.); Lindsay, P. (Patrice); Liu, L. (Liping); Martins, S.C.O. (Sheila C.O.); Morgan, L. (Louise); B. Norrving (Bo); Ribbers, G.M. (Gerard M.); Silver, F.L. (Frank L.); Smith, E.E. (Eric E.); Williams, L.S. (Linda S.); Schwamm, L.H. (Lee H.)

2015-01-01

markdownabstract__BACKGROUND AND PURPOSE:__ Value-based health care aims to bring together patients and health systems to maximize the ratio of quality over cost. To enable assessment of healthcare value in stroke management, an international standard set of patient-centered stroke outcome measures

Adolescent Mothers in a Transitional Living Facility: An Exploratory Study of Support Networks and Attachment Patterns

Science.gov (United States)

Schwartz, Ann E.; McRoy, Ruth G.; Downs, A. Chris

2004-01-01

Most of the research literature on attachment and adolescent transitions has addressed youth in family settings. This article explores these issues with a sample of 25 pregnant and parenting teens living in a transitional shelter. Using case records and interview data as well as results of standardized measures of depression, self-esteem, child…

Neutron effects on living things

International Nuclear Information System (INIS)

1964-01-01

Scientific interest in neutrons and protons - two fundamental particles of the atomic nucleus - has grown in recent years as the technology of peaceful uses of atomic energy has progressed. Such interest also has increased because both protons and neutrons are encountered in outer space. However, only recently has a thorough study of the biological effects of neutrons and protons become possible, as a result of progress in making physical measurements of the radiation dose absorbed in biological systems (of plants and animals, for example). Reports of work in that field were presented in December 1962, when IAEA sponsored at Harwell Laboratory in the United Kingdom the first international symposium on detection dosimetry (measurement) and standardization of neutron radiation sources. The Harwell meeting was followed in October 1963 at Brookhaven National Laboratory, Long Island, New York, by the first scientific meeting sponsored by IAEA in the U. S. Entitled 'Biological Effects of Neutron Irradiations', the Symposium continued the review of problems of measuring radiation absorption in living things and provided in addition for several reports dealing with the effects of radiation on living organisms - plant, animal and human - and with delayed consequences of exposure to radiation, such as: change in life span; tumour incidence; and fertility. Eighteen countries were represented. Although much has been learned about X-ray and gamma-ray effects, comparatively little is known about the biological effects of neutrons, and therefore many of the Symposium papers reviewed the various aspects of neutron experimentation. Similarly, since there is increasing interest in the biological effects of protons, papers were given on that related subject.

A high content, high throughput cellular thermal stability assay for measuring drug-target engagement in living cells.

Science.gov (United States)

Massey, Andrew J

2018-01-01

Determining and understanding drug target engagement is critical for drug discovery. This can be challenging within living cells as selective readouts are often unavailable. Here we describe a novel method for measuring target engagement in living cells based on the principle of altered protein thermal stabilization / destabilization in response to ligand binding. This assay (HCIF-CETSA) utilizes high content, high throughput single cell immunofluorescent detection to determine target protein levels following heating of adherent cells in a 96 well plate format. We have used target engagement of Chk1 by potent small molecule inhibitors to validate the assay. Target engagement measured by this method was subsequently compared to target engagement measured by two alternative methods (autophosphorylation and CETSA). The HCIF-CETSA method appeared robust and a good correlation in target engagement measured by this method and CETSA for the selective Chk1 inhibitor V158411 was observed. However, these EC50 values were 23- and 12-fold greater than the autophosphorylation IC50. The described method is therefore a valuable advance in the CETSA method allowing the high throughput determination of target engagement in adherent cells.

Ovarian response and cumulative live birth rate of women undergoing in-vitro fertilisation who had discordant anti-Mullerian hormone and antral follicle count measurements: a retrospective study.

Directory of Open Access Journals (Sweden)

Hang Wun Raymond Li

Full Text Available OBJECTIVE: To evaluate ovarian response and cumulative live birth rate of women undergoing in-vitro fertilization (IVF treatment who had discordant baseline serum anti-Mullerian hormone (AMH level and antral follicle count (AFC. METHODS: This is a retrospective cohort study on 1,046 women undergoing the first IVF cycle in Queen Mary Hospital, Hong Kong. Subjects receiving standard IVF treatment with the GnRH agonist long protocol were classified according to their quartiles of baseline AMH and AFC measurements after GnRH agonist down-regulation and before commencing ovarian stimulation. The number of retrieved oocytes, ovarian sensitivity index (OSI and cumulative live-birth rate for each classification category were compared. RESULTS: Among our studied subjects, 32.2% were discordant in their AMH and AFC quartiles. Among them, those having higher AMH within the same AFC quartile had higher number of retrieved oocytes and cumulative live-birth rate. Subjects discordant in AMH and AFC had intermediate OSI which differed significantly compared to those concordant in AMH and AFC on either end. OSI of those discordant in AMH and AFC did not differ significantly whether either AMH or AFC quartile was higher than the other. CONCLUSIONS: When AMH and AFC are discordant, the ovarian responsiveness is intermediate between that when both are concordant on either end. Women having higher AMH within the same AFC quartile had higher number of retrieved oocytes and cumulative live-birth rate.

Estimating Wet Bulb Globe Temperature Using Standard Meteorological Measurements

International Nuclear Information System (INIS)

Hunter, C.H.

1999-01-01

The heat stress management program at the Department of Energy''s Savannah River Site (SRS) requires implementation of protective controls on outdoor work based on observed values of wet bulb globe temperature (WBGT). To ensure continued compliance with heat stress program requirements, a computer algorithm was developed which calculates an estimate of WBGT using standard meteorological measurements. In addition, scripts were developed to generate a calculation every 15 minutes and post the results to an Intranet web site

Gas measuring apparatus with standardization means, and method therefor

International Nuclear Information System (INIS)

Typpo, P.M.

1980-01-01

An apparatus and a method for standardizing a gas measuring device has a source capable of emitting a beam of radiation aligned to impinge a detector. A housing means encloses the beam. The housing means has a plurality of apertures permitting the gas to enter the housing means, to intercept the beam, and to exit from the housing means. The device further comprises means for closing the apertures and a means for purging said gas from the housing means

9 CFR 113.300 - General requirements for live virus vaccines.

Science.gov (United States)

2010-01-01

... vaccines. 113.300 Section 113.300 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... REQUIREMENTS Live Virus Vaccines § 113.300 General requirements for live virus vaccines. When prescribed in an applicable Standard Requirement or in the filed Outline of Production, a live virus vaccine shall meet the...

Measurement of formation cross sections producing short-lived nuclei by 14 MeV neutrons. Pr, Ba, Ce, Sm, W, Sn, Hf

International Nuclear Information System (INIS)

Murahira, S.; Satoh, Y.; Honda, N.; Shibata, M.; Yamamoto, H.; Kawade, K.; Takahashi, A.; Iida, T.

1996-01-01

Thirteen neutron activation cross sections for (n,2n), (n,p), (n,np) and (n,α) reactions producing short-lived nuclei with half-lives between 56 s and 24 min were measured in the energy range from 13.4 MeV to 14.9 MeV for Pr, Ba, Ce, Sm, W, Sn and Hf. The cross sections of 179 Hf(n,np) 178m Lu and 180 Hf(n,p) 180 Lu were measured for the first time. (author)

Measuring Economic Abuse in the Lives of Survivors: Revising the Scale of Economic Abuse.

Science.gov (United States)

Postmus, Judy L; Plummer, Sara-Beth; Stylianou, Amanda M

2016-05-01

Recent attention has been given by researchers to understanding how abusers use economic abuse strategies. Unfortunately, limited measures are available to accurately understand the prevalence of economic abuse in the lives of survivors. Recently, researchers created the 28-item Scale of Economic Abuse (SEA) but further validation is needed. This article describes the psychometric evaluation of the SEA through confirmatory and exploratory factor analyses using data collected with 120 survivors of abuse. The findings provide evidence for the reliability and validity of the SEA-12 as a shorter instrument to measure economic abuse as a distinct form of abuse. © The Author(s) 2015.

A principle for the noninvasive measurement of steady-state heat transfer parameters in living tissues

Directory of Open Access Journals (Sweden)

S. Yu. Makarov

2014-01-01

Full Text Available Measuring the parameters of biological tissues (include in vivo is of great importance for medical diagnostics. For example, the value of the blood perfusion parameter is associated with the state of the blood microcirculation system and its functioning affects the state of the tissues of almost all organs. This work describes a previously proposed principle [1] in generalized terms. The principle is intended for noninvasive measuring the parameters of stationary heat transfer in biological tissues. The results of some experiments (natural and numeric are also presented in the research.For noninvasive measurement of thermophysical parameters a number of techniques have been developed using non-stationary thermal process in biological tissue [2][3]. But these techniques require the collecting a lot of data to represent the time-dependent thermal signal. In addition, subsequent processing with specialized algorithms is required for optimal selecting the parameters. The goal of this research is to develop an alternative approach using stationary thermal process for non-invasive measuring the parameters of stationary heat transfer in living tissues.A general principle can be formulated for the measurement methods based on this approach. Namely, the variations (changes of two physical values are measured in the experiment at the transition from one thermal stationary state to another. One of these two physical values unambiguously determines the stationary thermal field into the biological tissue under specified experimental conditions while the other one is unambiguously determined through the thermal field. Then, the parameters can be found from the numerical (or analytical functional dependencies linking the measured variations because the dependencies contain unknown parameters.The dependencies are expressed in terms of the formula:dqi = fi({pj},Ui dUi,Here dqi is a variation of a physical value q which is unambiguously determined from the

Reliability of linear distance measurement for dental implant length with standardized periapical radiographs

International Nuclear Information System (INIS)

Wakoh, Mamoru; Harada, Takuya; Otonari, Takamichi

2006-01-01

The purpose of this study was to investigate the accuracy of distance measurements of implant length based on periapical radiographs compared with that of other modalities. We carried out an experimental trial to compare precision in distance measurement. Dental implant fixtures were buried in the canine and first molar regions. These were then subjected to periapical (PE) radiography, panoramic (PA) radiography conventional (CV) and medical computed (CT) tomography. The length of the implant fixture on each film was measured by nine observers and degree of precision was statistically analyzed. The precision of both PE radiographs and CT tomograms was closest at the highest level. Standardized PE radiography, in particular, was superior to CT tomography in the first molar region. This suggests that standardized PE radiographs should be utilized as a reliable modality for longitudinal and linear distance measurement, depending on implant length at local implantation site. (author)

An ROC-type measure of diagnostic accuracy when the gold standard is continuous-scale.

Science.gov (United States)

Obuchowski, Nancy A

2006-02-15

ROC curves and summary measures of accuracy derived from them, such as the area under the ROC curve, have become the standard for describing and comparing the accuracy of diagnostic tests. Methods for estimating ROC curves rely on the existence of a gold standard which dichotomizes patients into disease present or absent. There are, however, many examples of diagnostic tests whose gold standards are not binary-scale, but rather continuous-scale. Unnatural dichotomization of these gold standards leads to bias and inconsistency in estimates of diagnostic accuracy. In this paper, we propose a non-parametric estimator of diagnostic test accuracy which does not require dichotomization of the gold standard. This estimator has an interpretation analogous to the area under the ROC curve. We propose a confidence interval for test accuracy and a statistical test for comparing accuracies of tests from paired designs. We compare the performance (i.e. CI coverage, type I error rate, power) of the proposed methods with several alternatives. An example is presented where the accuracies of two quick blood tests for measuring serum iron concentrations are estimated and compared.

Performance Measurement Implementation Of Minimum Service Standards For Basic Education Based On The Balanced Scorecard

Directory of Open Access Journals (Sweden)

Budiman Rusli

2015-08-01

Full Text Available Policies Minimum Service Standards for Basic Education has rolled out since 2002 by the minister in accordance with the Decree No. 129a U 2004 About Minimum Service Standards Education is continually updated and lastly Regulation of the Minister of Education and Culture No. 23 of 2013. All of the district government town should achieve the target of achieving 100 per cent in each of the indicators listed in the minimum service standards for the end of 2014. achievement pad on each indicator is just one measure of the performance of the local government department of education. Unfortunately from the announced target for 27 indicators that exist almost all regions including local governments do not reach Tangerang Regency. It is necessary for measuring the performance of local authorities particularly the education department. One performance measure modern enough that measurements can be done that The Balance Scorecard BSc. In the Balanced Scorecard is a management tool contemporare complete measure company performance not only of the financial perspective but also non-financial performance such as Customer Perspective Internal Business Processes and Learning and Growth. This approach is actually ideally suited for multinational companies because this approach requires very expensive but can be used to measure the profit performance of the company in addition to the combination of a long-term strategic and short-strategic. Balanced Scorecard it can also be done in measuring the performance of public sector services as well by modifying a few things so it can be used to measure the performance of the public sector including the Performance Measurement Minimum Service Standards for Basic Education.

Recent improvements of ISOLTRAP Absolute mass measurements of exotic nuclides at $10^{-8}$ precision

CERN Document Server

Kellerbauer, A G

2003-01-01

In the past three years, the sensitivity and the performance of the Penning trap mass spectrometer ISOLTRAP have been enhanced significantly. These improvements, which range from technical developments to systematic studies of the various factors contributing to the uncertainty of the final mass result, now allow mass measurements of short-lived radionuclides with half-lives of less than 100 ms and with a precision of better than 10$^{-8}$. Using a newly developed carbon cluster ion source, ISOLTRAP can perform absolute mass measurements relative to the microscopic mass standard $^{12}$C. These developments are reviewed as pertaining to the extension of ISOLTRAP mass measurements to higher precision and shorter half-lives and to molecular mass measurements.

Estimating the extra cost of living with disability in Vietnam.

Science.gov (United States)

Minh, Hoang Van; Giang, Kim Bao; Liem, Nguyen Thanh; Palmer, Michael; Thao, Nguyen Phuong; Duong, Le Bach

2015-01-01

Disability is shown to be both a cause and a consequence of poverty. However, relatively little research has investigated the economic cost of living with a disability. This study reports the results of a study on the extra cost of living with disability in Vietnam in 2011. The study was carried out in eight cities/provinces in Vietnam, including Hanoi and Ho Chi Minh cities (two major metropolitan in Vietnam) and six provinces from each of the six socio-economic regions in Vietnam. Costs are estimated using the standard of living approach whereby the difference in incomes between people with disability and those without disability for a given standard of living serves as a proxy for the cost of living with disability. The extra cost of living with disability in Vietnam accounted for about 8.8-9.5% of annual household income, or valued about US$200-218. Communication difficulty was shown to result in highest additional cost of living with disability and self-care difficulty was shown to lead to the lowest levels of extra of living cost. The extra cost of living with disability increased as people had more severe impairment. Interventions to promote the economic security of livelihood for people with disabilities are needed.

Measuring Life Skills: Standardizing the Assessment of Youth Development Indicators

Directory of Open Access Journals (Sweden)

Mat D. Duerden

2012-03-01

Full Text Available While the development of life skills (e.g., communication, problem solving, etc. is a commonly targeted youth program outcome, the lack of standardized conceptualizations and instrumentation make it difficult to compare impacts across programs and develop validated best practices. In order to promote a more unified approach to life skill development, literature reviews were conducted for 10 life skill domains to identify common definitions and, if available, appropriate outcome measures. Data were then collected from an ethnically diverse sample (N = 758 of elementary, middle, and high school aged youth for the 10 identified instruments. Analyses were conducted to ascertain the psychometric qualities of each measure, the interrelationships among measures, and the measures’ relationships with gender, ethnicity, and school level. Results are discussed in terms of their relevance to life skill theory and measurement.

Evaluating the Feasibility and Intercorrelation of Measurements on the Functioning of Residents Living in Scandinavian Nursing Homes

DEFF Research Database (Denmark)

Andresen, Mette; Frändin, Kerstin; Grönstedt, Helena

2010-01-01

Background. The purpose of this study is to investigate the feasibility of measurements of muscle strength, balance, cognitive function, mobility, activities of daily living (ADL), and physical activity for use in a Scandinavian nursing home population and to examine intercorrelations between...

Quantum measurement and orientation tracking of fluorescent nanodiamonds inside living cells

Science.gov (United States)

McGuinness, L. P.; Yan, Y.; Stacey, A.; Simpson, D. A.; Hall, L. T.; MacLaurin, D.; Prawer, S.; Mulvaney, P.; Wrachtrup, J.; Caruso, F.; Scholten, R. E.; Hollenberg, L. C. L.

2011-06-01

Fluorescent particles are routinely used to probe biological processes. The quantum properties of single spins within fluorescent particles have been explored in the field of nanoscale magnetometry, but not yet in biological environments. Here, we demonstrate optically detected magnetic resonance of individual fluorescent nanodiamond nitrogen-vacancy centres inside living human HeLa cells, and measure their location, orientation, spin levels and spin coherence times with nanoscale precision. Quantum coherence was measured through Rabi and spin-echo sequences over long (>10 h) periods, and orientation was tracked with effective 1° angular precision over acquisition times of 89 ms. The quantum spin levels served as fingerprints, allowing individual centres with identical fluorescence to be identified and tracked simultaneously. Furthermore, monitoring decoherence rates in response to changes in the local environment may provide new information about intracellular processes. The experiments reported here demonstrate the viability of controlled single spin probes for nanomagnetometry in biological systems, opening up a host of new possibilities for quantum-based imaging in the life sciences.

A new integrative methodology for desertification studies based on magnetic and short-lived radioisotope measurements

International Nuclear Information System (INIS)

Oldfield, F.; Higgitt, S.R.; Maher, B.A.; Appleby, P.G.; Scoullos, M.

1986-01-01

The use of mineral magnetic measurements and short-lived radioisotope studies with 210 Pb and 137 Cs is discussed within the ecosystem watershed conceptual framework. Used in conjunction with geomorphological, sedimentological, palaeoecological and geochemical techniques, these methods can form the core of an integrated multidisciplinary study of desertification and erosion processes on all relevant temporal and spatial scales. 30 refs.; 4 figs

Standardization of radiation protection measurements in mixed fields of an extended energy range

International Nuclear Information System (INIS)

Hoefert, M.; Stevenson, G.R.

1977-01-01

The improved ICRU concept of dose equivalent index aims at standardizing both area and personnel dose measurements so that the results on the dosimetry of external irradiations in radiation protection become compatible. It seems that for photon and neutron energies up to 3 and 20 MeV respectively the realization of dose-equivalent index is straightforward, but the inclusion of higher energies and/or other types of radiation will lead both to conceptual and practical difficulties. It will be shown that practical measurements in mixed radiation fields of an extended energy range for protection purposes will overestimate the standardized quantity. While area measurements can be performed to represent a good approximation, greater uncertainties have to be accepted in personnel dosimetry for stray radiation fields around GeV proton accelerators

Development of a Primary Standard for Calibration of [{sup 18}F]FDG Activity Measurement Systems

Energy Technology Data Exchange (ETDEWEB)

Capogni, M [ENEA Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (INMRI), Centro Ricerche Casaccia, I-00060 Rome (Italy); Felice, P De [ENEA Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (INMRI), Centro Ricerche Casaccia, I-00060 Rome (Italy); Fazio, A [ENEA Istituto Nazionale di Metrologia delle Radiazioni Ionizzanti (INMRI), Centro Ricerche Casaccia, I-00060 Rome (Italy); Simonelli, F [Institute for Health and Consumer Protection, Joint Research Centre (JRC), European Commission, I-21020 Ispra (Vatican City State, Holy See,), Italy; D' Ursi, V [Amersham Health Srl (AH), I-13040 Saluggia (Saint Vincent and the Grenadines), Italy; Pecorale, A [Amersham Health Srl (AH), I-13040 Saluggia (Saint Vincent and the Grenadines), Italy; Giliberti, C [Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro (ISPESL), I-00184 Rome (Italy); Abbas, K [Institute for Health and Consumer Protection, Joint Research Centre (JRC), European Commission, I-21020 Ispra (Vatican City State, Holy See,), Italy

2006-05-15

The {sup 18}F national primary standard was developed by the INMRI-ENEA using the 4{pi}{beta} Liquid Scintillation Spectrometry Method with {sup 3}H-Standard Efficiency Tracing. Measurements were performed at JRCIspra under a scientific collaboration between the Institute for Health and Consumer Production, the Amersham Health and the National Institute for Occupational Safety and Prevention (ISPESL). The goal of the work was to calibrate, with minimum uncertainty, the INMRI-ENEA transfer standard portable well-type ionisation chamber as well as other JRC-Ispra and Amersham Health reference Ionising Chambers used for FDG activity measurement.

Humidity correction in the standard measurement of exposure

International Nuclear Information System (INIS)

Ibaraki, Yasuyuki; Katoh, Akira

1980-01-01

This paper deals with the humidity correction to be made in the standard measurement of the exposure to the measured ionization current in the humid air for the purpose of excluding the influence of the water vapour that is not included in the definition of the exposure. First, formulae giving the humidity correction factors for a parallel plate free air chamber and a cavity chamber have been derived respectively in the case where the contributions of air and water vapour to the ionization are independent. Next, in the case where the contributions are not independent, i.e., the Jesse effect is taken into account, a formula to obtain the W-value for humid air has been derived on the basis of the Niatel's experimental result. Using this formula, formulae to obtain the humidity correction factors for the free air chamber and the cavity chamber are derived. The humidity calculated by the latter formulae show good agreements with the results by Niatel and Guiho, respectively. (author)

Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

CERN Document Server

American Society for Testing and Materials. Philadelphia

1996-01-01

1.1 This test method covers an electronic hydrogen detection instrument procedure for measurement of plating permeability to hydrogen. This method measures a variable related to hydrogen absorbed by steel during plating and to the hydrogen permeability of the plate during post plate baking. A specific application of this method is controlling cadmium-plating processes in which the plate porosity relative to hydrogen is critical, such as cadmium on high-strength steel. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statement, see Section 8. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Measurements of β or α emitter long lived radionuclides using inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Provitina, O.

1993-01-01

The measurement of long-lived radionuclides is highly important for characterizing nuclear wastes for their later storage. The main techniques for characterizing these isotopes are α spectrometry, β counting and γ spectrometry. The large period of these isotopes leads to low specific activity needing time consuming measurements in order to obtain significant signals. Moreover, the radiometric techniques are often limited by problems of interferences involving several steps of pretreatments. Among these steps, the specific extraction with crown ethers is highly selective for the separation of 99 Tc, 129 I and 135 Cs particularly. The radiometric techniques are here replaced by inductively coupled plasma mass spectroscopy (ICP-MS) the advantages of which are: few interferences, sensitivity which does not depend on the radiologic period as compared to radiochemistry. ICP-MS can then measure 237 Np in enriched uranium matrix and thereby reduce by a factor of 4 the sample pretreatment and the duration of the analysis usually performed by α spectrometry. Another technique, electrothermal vaporization (ETV), is consequently used. Crown ether extraction-ETV-ICP-MS is employed for measuring the long lived radionuclides 99 Tc and 129 I. The conditions of the extraction and the parameters of the ETV and the ICP-MS are studied and optimized. The methods optimized (extraction, electrothermal vaporization) are validated in the case of 99 Tc, in real samples. The spike method is required to quantify technetium, the quantification with calibration leading to bad results. The results obtained are in good agreement with the expected values. Extraction of technetium on anionic resin and its measurement by the spike method with pneumatic nebulization-ICP-MS is also performed on other samples. Measured values are also in agreement with expected values, but the method of extraction is more time consuming (half a day) than the extraction with crown ether (one hour). (author). 54 figs

Long-lived heavy mass elements half-lives (A > 125)

International Nuclear Information System (INIS)

Holden, N.E.

1985-01-01

Reported values of half-lives of intermediate mass and heavy elements are evaluated. The evaluation analysis estimates the systematic error the resulting standard deviation. Recommended values are then presented for 128 Te, 130 Te, 129 I, 138 La, 144 Nd, 145 Nd, /sup 146,147,148/Sm, 152 Gd, 154 Dy, 176 Lu, 174 Hf, 180 Ta, 187 Re, 186 Os, 190 Pt, /sup 204,205/Pb, and /sup 230,232/Th. 103 refs., 21 tabs

Standards and measurements for assessing bone health-workshop report co-sponsored by the International Society for Clinical Densitometry (ISCD) and the National Institute of Standards and Technology (NIST).

Science.gov (United States)

Bennett, Herbert S; Dienstfrey, Andrew; Hudson, Lawrence T; Oreskovic, Tammy; Fuerst, Thomas; Shepherd, John

2006-01-01

This article reports and discusses the results of the recent ISCD-NIST Workshop on Standards and Measurements for Assessing Bone Health. The purpose of the workshop was to assess the status of efforts to standardize and compare results from dual-energy X-ray absorptiometry (DXA) scans, and then to identify and prioritize ongoing measurement and standards needs.

Seventy Years of Radio Science, Technology, Standards, and Measurement at the National Bureau of Standards

Science.gov (United States)

Gillmor, C. Stewart

This large volume describes all the forms of radio research done at the National Bureau of Standards (now, National Institute of Standards and Technology) from its founding in 1901 until about 1980. The volume truly reflects its subtitle; it describes in great detail research in radio propagation and all its connections with geophysics and geospace, but also radio as instrument for discovery and application in meteorology, navigation, and in standards of measurement and testing in electronics.The book is a bit unwieldy and some of its chapters will be of most interest to former NBS employees. For example, there is a lengthy chapter on the transfer of radio research work from Washington, D.C, to Boulder, Colo., in the early 1950s, complete with photostat of the quit claim deed to NBS from the Boulder Chamber of Commerce. On the other hand, radio research developed and flourished in this country in the early days at industrial (Bell Telephone, General Electric, Westinghouse) and government (NBS, Naval Research Laboratory) labs more than in academia, and it is very interesting to learn how the labs interacted and to read details of the organizational structure. I can attest personally to the great difficulties in locating materials concerning radio history. While we have numerous volumes devoted to certain popular radio heroes, little is available concerning government radio pioneers such as L. W. Austin, who directed the U.S. Navy's radio research for many years while situated physically at the Bureau of Standards, or J. H. Dellinger, long-time chief of the Radio Section and head spokesman on radio for the U.S. government until the 1930s.

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Titanium

CERN Document Server

American Society for Testing and Materials. Philadelphia

2008-01-01

1.1 This test method covers procedures for measuring reaction rates by the activation reactions 46Ti(n,p) 46Sc + 47Ti(n, np)46Sc. Note 1—Since the cross section for the (n,np) reaction is relatively small for energies less than 12 MeV and is not easily distinguished from that of the (n,p) reaction, this test method will refer to the (n,p) reaction only. 1.2 The reaction is useful for measuring neutrons with energies above approximately 4.4 MeV and for irradiation times up to about 250 days (for longer irradiations, see Practice E 261). 1.3 With suitable techniques, fission-neutron fluence rates above 109 cm–2·s–1 can be determined. However, in the presence of a high thermal-neutron fluence rate, 46Sc depletion should be investigated. 1.4 Detailed procedures for other fast-neutron detectors are referenced in Practice E 261. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all...

Standardized Approach to Quantitatively Measure Residual Limb Skin Health in Individuals with Lower Limb Amputation.

Science.gov (United States)

Rink, Cameron L; Wernke, Matthew M; Powell, Heather M; Tornero, Mark; Gnyawali, Surya C; Schroeder, Ryan M; Kim, Jayne Y; Denune, Jeffrey A; Albury, Alexander W; Gordillo, Gayle M; Colvin, James M; Sen, Chandan K

2017-07-01

Objective: (1) Develop a standardized approach to quantitatively measure residual limb skin health. (2) Report reference residual limb skin health values in people with transtibial and transfemoral amputation. Approach: Residual limb health outcomes in individuals with transtibial ( n  = 5) and transfemoral ( n  = 5) amputation were compared to able-limb controls ( n  = 4) using noninvasive imaging (hyperspectral imaging and laser speckle flowmetry) and probe-based approaches (laser doppler flowmetry, transcutaneous oxygen, transepidermal water loss, surface electrical capacitance). Results: A standardized methodology that employs noninvasive imaging and probe-based approaches to measure residual limb skin health are described. Compared to able-limb controls, individuals with transtibial and transfemoral amputation have significantly lower transcutaneous oxygen tension, higher transepidermal water loss, and higher surface electrical capacitance in the residual limb. Innovation: Residual limb health as a critical component of prosthesis rehabilitation for individuals with lower limb amputation is understudied in part due to a lack of clinical measures. Here, we present a standardized approach to measure residual limb health in people with transtibial and transfemoral amputation. Conclusion: Technology advances in noninvasive imaging and probe-based measures are leveraged to develop a standardized approach to quantitatively measure residual limb health in individuals with lower limb loss. Compared to able-limb controls, resting residual limb physiology in people that have had transfemoral or transtibial amputation is characterized by lower transcutaneous oxygen tension and poorer skin barrier function.

[Hyperfine structure and isotope shift measurements of short lived elements by laser spectroscopy

International Nuclear Information System (INIS)

Schuessler, H.A.

1986-01-01

The aim of this research is to determine nuclear moments and charge distributions of short-lived isotopes produced both on-line and off-line to a nuclear facility. These measurements give detailed information on the nuclear force and are used to test current nuclear models. The small amounts of nuclei which can be produced off stability constitute the challenge in these experiments. Presently mainly neutron-rich isotopes are being studied by three ultrasensitive high-resolution laser techniques. These are collinear fast ion-beam laser spectroscopy, stored-ion laser spectroscopy and fluorescence spectroscopy. 5 figs

A transportable magnetic resonance imaging system for in situ measurements of living trees: the Tree Hugger.

Science.gov (United States)

Jones, M; Aptaker, P S; Cox, J; Gardiner, B A; McDonald, P J

2012-05-01

This paper presents the design of the 'Tree Hugger', an open access, transportable, 1.1 MHz (1)H nuclear magnetic resonance imaging system for the in situ analysis of living trees in the forest. A unique construction employing NdFeB blocks embedded in a reinforced carbon fibre frame is used to achieve access up to 210 mm and to allow the magnet to be transported. The magnet weighs 55 kg. The feasibility of imaging living trees in situ using the 'Tree Hugger' is demonstrated. Correlations are drawn between NMR/MRI measurements and other indicators such as relative humidity, soil moisture and net solar radiation. Copyright © 2012 Elsevier Inc. All rights reserved.

The effects of Snoezelen (multi-sensory behavior therapy) and psychiatric care on agitation, apathy, and activities of daily living in dementia patients on a short term geriatric psychiatric inpatient unit.

Science.gov (United States)

Staal, Jason A; Sacks, Amanda; Matheis, Robert; Collier, Lesley; Calia, Tina; Hanif, Henry; Kofman, Eugene S

2007-01-01

A randomized, controlled, single-blinded, between group study of 24 participants with moderate to severe dementia was conducted on a geriatric psychiatric unit. All participants received pharmacological therapy, occupational therapy, structured hospital environment, and were randomized to receive multi sensory behavior therapy (MSBT) or a structured activity session. Greater independence in activities of daily living (ADLs) was observed for the group treated with MSBT and standard psychiatric inpatient care on the Katz Index of Activities of Daily Living (KI-ADL; P = 0.05) than standard psychiatric inpatient care alone. The combination treatment of MSBT and standard psychiatric care also reduced agitation and apathy greater than standard psychiatric inpatient care alone as measured with the Pittsburgh Agitation Scale and the Scale for the Assessment of Negative Symptoms in Alzheimer's Disease (P = 0.05). Multiple regression analysis predicted that within the multi-sensory group, activities of daily living (KI-ADL) increased as apathy and agitation reduced (R2 = 0.42; p = 0.03). These data suggest that utilizing MSBT with standard psychiatric inpatient care may reduce apathy and agitation and additionally improve activities of daily living in hospitalized people with moderate to severe dementia more than standard care alone.

Preservation Study for Ultra-Dilute VX Standards | Science ...

Science.gov (United States)

Report Lawrence Livermore National Laboratory (LLNL) supplies ultra-dilute (10 µg/mL) chemical warfare agent (CWA) standards to the Environmental Response Laboratory Network (ERLN) laboratories to allow the use of authentic standards to assist in analyses required for a remediation event involving CWAs. For this reason, it is important to collect data regarding the shelf-lives of these standards. The instability has the potential to impact quality control in regional ERLN laboratories, resulting in data that are difficult to interpret. Thus, this study investigated the use of chemical stabilizers to increase the shelf-life of VX standards. VX standards with long shelf-lives are desirable, as long shelf-life would significantly reduce the costs associated with synthesizing and resupplying the ERLN laboratories with VX.

Standard and procedures for measuring and evaluating of the field electromagnetic signals

International Nuclear Information System (INIS)

Fallas Cordero, Oscar

2007-01-01

Rules and procedures are developed for measuring the intensity of electromagnetic field signals produced by public commercial broadcasters. International and national standards applicable to existing broadcasting area were investigated. The Manual para la Comprobacion Tecnica de las Emisiones of the International Radio Consultative Committee of the International Telecommunications Union was used for reference in the procedures. It was worked in coordination with the Control Nacional de Radio and Radio U to obtain information and to study the teams to present a measurement system for laboratory that meets with the standards suggested and which can encompass a wide range of transmission services. Finally agreed with the analysis and research work done, a series of recommendations were made for improvement, which are considered to implement them in medium and long time. (author) [es

Are traditional body fat equations and anthropometry valid to estimate body fat in children and adolescents living with HIV?

Science.gov (United States)

Lima, Luiz Rodrigo Augustemak de; Martins, Priscila Custódio; Junior, Carlos Alencar Souza Alves; Castro, João Antônio Chula de; Silva, Diego Augusto Santos; Petroski, Edio Luiz

The aim of this study was to assess the validity of traditional anthropometric equations and to develop predictive equations of total body and trunk fat for children and adolescents living with HIV based on anthropometric measurements. Forty-eight children and adolescents of both sexes (24 boys) aged 7-17 years, living in Santa Catarina, Brazil, participated in the study. Dual-energy X-ray absorptiometry was used as the reference method to evaluate total body and trunk fat. Height, body weight, circumferences and triceps, subscapular, abdominal and calf skinfolds were measured. The traditional equations of Lohman and Slaughter were used to estimate body fat. Multiple regression models were fitted to predict total body fat (Model 1) and trunk fat (Model 2) using a backward selection procedure. Model 1 had an R 2 =0.85 and a standard error of the estimate of 1.43. Model 2 had an R 2 =0.80 and standard error of the estimate=0.49. The traditional equations of Lohman and Slaughter showed poor performance in estimating body fat in children and adolescents living with HIV. The prediction models using anthropometry provided reliable estimates and can be used by clinicians and healthcare professionals to monitor total body and trunk fat in children and adolescents living with HIV. Copyright © 2017 Sociedade Brasileira de Infectologia. Published by Elsevier Editora Ltda. All rights reserved.

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

International Nuclear Information System (INIS)

Islam, S.; Huda, A.-U.

1999-01-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

Energy Technology Data Exchange (ETDEWEB)

Islam, S.; Huda, A.-U. [University of Dhaka (Bangladesh). Physics Dept.

1999-06-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Precision measurements of the CKM angle gamma

CERN Multimedia

CERN. Geneva

2016-01-01

The level of CP-violation permitted within the Standard Model cannot account for the matter dominated universe in which we live. Within the Standard Model the CKM matrix, which describes the quark couplings, is expected to be unitary. By making precise measurements of the CKM matrix parameters new physics models can be constrained, or with sufficient precision the effects of physics beyond the standard model might become apparent. The CKM angle gamma is the least well known angle of the unitarity triangle. It is the only angle easily accessible at tree-level, and furthermore has almost no theoretical uncertainties. Therefore it provides an invaluable Standard Model benchmark against which other new physics sensitive tests of the CP-violation can be made. I will discuss recent measurements of gamma using the the Run 1 LHCb dataset, which improve our knowledge of this key parameter.

Best practices in selecting performance measures and standards for effective asset management.

Science.gov (United States)

2011-06-01

"This report assesses and provides guidance on best practices in performance measurement, management and standards : setting for effective Transportation Asset Management (TAM). The study is conducted through a literature review, a : survey of the 50...

The primary exposure standard for Co-60 gamma radiation: characteristics and measurements procedures

International Nuclear Information System (INIS)

Laitano, R.F.; Toni, M.P.

1983-01-01

A description is given of a cavity ionization chamber used, as a primary exposure standard, at the Laboratorio di Metrologia delle Radiazioni Ionizzanti of the ENEA in Italy. The primary standard is designed to make absolute measurements of exposure due to the Co-60 gamma radiation. The procedures for the realizationof the exposure unit are also described. Finally results of some international comparisons are reported

An integrated model to measure service management and physical constraints' effect on food consumption in assisted-living facilities.

Science.gov (United States)

Huang, Hui-Chun; Shanklin, Carol W

2008-05-01

The United States is experiencing remarkable growth in the elderly population, which provides both opportunities and challenges for assisted-living facilities. The objective of this study was to explore how service management influences residents' actual food consumption in assisted-living facilities. Physical factors influencing residents' service evaluation and food consumption also were investigated. A total of 394 questionnaires were distributed to assisted-living residents in seven randomly selected facilities. The questionnaire was developed based on an in-depth literature review and pilot study. Residents' perceived quality evaluations, satisfaction, and physical constraints were measured. Residents' actual food consumption was measured using a plate waste technique. A total of 118 residents in five facilities completed both questionnaires and food consumption assessments. Descriptive, multivariate analyses and structural equation modeling techniques were employed. Service management, including food and service quality and customer satisfaction, was found to significantly influence residents' food consumption. Physical constraints associated with aging, including a decline in health status, chewing problems, sensory loss, and functional disability, also significantly influenced residents' food consumption. A significant relationship was found between physical constraints and customer satisfaction. Foodservice that provides good food and service quality increases customer satisfaction and affects residents' actual food consumption. Physical constraints also influence residents' food consumption directly, or indirectly through satisfaction. The findings suggest that food and nutrition professionals in assisted-living should consider the physical profiles of their residents to enhance residents' satisfaction and nutrient intake. Recommendations for exploring residents' perspectives are discussed.

Standardized Effect Size Measures for Mediation Analysis in Cluster-Randomized Trials

Science.gov (United States)

Stapleton, Laura M.; Pituch, Keenan A.; Dion, Eric

2015-01-01

This article presents 3 standardized effect size measures to use when sharing results of an analysis of mediation of treatment effects for cluster-randomized trials. The authors discuss 3 examples of mediation analysis (upper-level mediation, cross-level mediation, and cross-level mediation with a contextual effect) with demonstration of the…

LIVE/DEAD YEAST VIABILITY STAINING AS A TOOL FOR IMPROVING ARTISANAL PILSNER BEER PRODUCTION

Directory of Open Access Journals (Sweden)

Benedetta Bottari

2014-10-01

Full Text Available The production of an artisanal beer, made by brewers using traditional practices on a small scale, is founded on the empirical adjustment of parameters, including yeasts handling and serial repitching. The aim of this study was to monitor yeast viability during different stages of artisanal beer productions through the Live/Dead Yeast viability staining and to correlate it with fermentation dynamics in order to increase process standardization and to maintain the quality of final products. Yeast viability and fermentation activities were evaluated during seven fermentation cycles of an artisanal pilsner beer. Yeast inoculated with higher viability performed generally better in fermentation, resulting in faster sugar consumption, faster ethanol production and stability. Handling yeast and serial repitching based on Live/Dead viability measurements, could be the key way to ensure reliable manufacture of high quality beer and to improve process standardization particularly for microbreweries, where variability of production can be a challenging point.

Random summing in a multi-detector counting system measuring mixtures of radionuclides of short and long half-lives

International Nuclear Information System (INIS)

Oxby, C.B.; Oldroyd, B.; Graham, S.G.

1979-01-01

A method is described for correcting a radiation spectrum for the distortion caused by random summing when a multidetector array is used to acquire events from a mixture of radionuclides whose half-lives may be long or short compared with the counting period. With our own counting system it was found that both the resolving time, and the fractions of the energy of a second signal which may be added to that of the immediately previous signal, i.e., the resolving time function, are dependent upon the energies of these two signals. The method requires knowledge of the losses which occur in a multidetector system e.g., live-time error and blocking losses, the variation of the resolving time function with signal energies, a standard spectrum of each radionuclide of the mixture and the fractions of them which constitute the mixture spectrum, the decay constant of each radionuclide, and the fraction of the total events recorded by the system being received by each detector. (orig.)

Stress predicts the trajectory of wound healing in living kidney donors as measured by high-resolution ultrasound.

Science.gov (United States)

Maple, Hannah; Chilcot, Joseph; Lee, Vanessa; Simmonds, Shanique; Weinman, John; Mamode, Nizam

2015-01-01

Psychological stress has been shown to be an influential factor on the rate of wound healing; however these findings have been demonstrated predominantly on artificially created wounds. Due to the absence of major co-morbidities, living kidney donors are a unique group in which to study this relationship. This study investigated the effect of preoperative stress and personality on surgical wound healing through the use of high-resolution ultrasound. Living kidney donors due to undergo a hand-assisted laparoscopic donor nephrectomy were asked to complete the Perceived Stress Scale, the Life Orientation Test-Revised and the Ten Item Personality Inventory prior to surgery. High-resolution ultrasound scans of surgical wounds were performed on the first three post-operative days and once following discharge (mean=15.3 days; s.d. 2.8). Two measurements from each image were obtained: wound width (size of wound) and median intensity (a marker of tissue fluid). Latent Growth Curve Models (LGCMs) were used to evaluate wound healing. 52 living kidney donors participated. Higher pre-operative life stress, lower optimism and lower conscientiousness were associated with delayed wound healing in living kidney donors for both outcomes. Increased emotional stability was associated with faster wound healing as demonstrated by a change in median intensity. Possible confounding factors, such as age, BMI, smoking status, local anaesthetic use and wound drain placement were not influential. This study, which measured wound healing in a novel patient sample using a novel technique, has demonstrated a negative association between stress and wound healing and the positive influence of optimism, conscientiousness and emotional stability. Copyright © 2014 Elsevier Inc. All rights reserved.

Living arrangements and mental health in Finland

Science.gov (United States)

Joutsenniemi, Kaisla; Martelin, Tuija; Martikainen, Pekka; Pirkola, Sami; Koskinen, Seppo

2006-01-01

Background Non‐married persons are known to have poor mental health compared with married persons. Health differences between marital status groups may largely arise from corresponding differences in interpersonal social bonds. However, official marital status mirrors the social reality of persons to a decreasing extent, and living arrangements may be a better measure of social bonds. Little is known about mental health in different living arrangement groups. This study aims to establish the extent and determinants of mental health differences by living arrangement in terms of psychological distress (GHQ) and DSM‐IV psychiatric disorders (CIDI). Methods Data were used from the nationally representative cross sectional health 2000 survey, conducted in 2000–1 in Finland. Altogether 4685 participants (80%) aged 30–64 years were included in these analyses; comprehensive information was available on measures of mental health and living arrangements. Living arrangements were measured as follows: married, cohabiting, living with other(s) than a partner, and living alone. Results Compared with the married, persons living alone and those living with other(s) than a partner were approximately twice as likely to have anxiety or depressive disorders. Cohabiters did not differ from the married. In men, psychological distress was similarly associated with living arrangements. Unemployment, lack of social support, and alcohol consumption attenuated the excess psychological distress and psychiatric morbidity of persons living alone and of those living with other(s) than a partner by about 10%–50% each. Conclusions Living arrangements are strongly associated with mental health, particularly among men. Information on living arrangements, social support, unemployment, and alcohol use may facilitate early stage recognition of poor mental health in primary health care. PMID:16698975

The Significance of Sexuality and Intimacy in the Lives of Older African Americans With HIV/AIDS.

Science.gov (United States)

Nevedal, Andrea; Sankar, Andrea

2016-08-01

Aging and HIV/AIDS research focuses primarily on standardized clinical, social, and behavioral measures, leaving unanswered questions about how this chronic and stigmatizing condition affects life course expectations and the meaning of aging with the disease. Utilizing Gaylene Becker's (1997) life course disruption theory, we explored older African Americans' experiences of living with HIV/AIDS. A purposive sample (N = 43) of seropositive African Americans aged 50 and older was selected from a parent study. Thirteen participants completed one semi-structured in-depth interview on life course expectations and experiences of living with HIV/AIDS. Interview transcripts were analyzed using standard qualitative coding and thematic analysis. Responding to broad, open-ended questions about the impact of HIV on life course expectations, participants emphasized how HIV limited their ability to experience sexuality and intimacy. Two major themes emerged, damaged sexuality and constrained intimacy. Older African Americans' discussions of living with HIV focused on the importance of and the challenges to sexuality and intimacy. Researchers and clinicians should be attentive to significant and ongoing HIV-related challenges to sexuality and intimacy facing older African Americans living with HIV/AIDS. © The Author 2015. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Evaluation of measurement reproducibility using the standard-sites data, 1994 Fernald field characterization demonstration project

International Nuclear Information System (INIS)

Rautman, C.A.

1996-02-01

The US Department of Energy conducted the 1994 Fernald (Ohio) field characterization demonstration project to evaluate the performance of a group of both industry-standard and proposed alternative technologies in describing the nature and extent of uranium contamination in surficial soils. Detector stability and measurement reproducibility under actual operating conditions encountered in the field is critical to establishing the credibility of the proposed alternative characterization methods. Comparability of measured uranium activities to those reported by conventional, US Environmental Protection Agency (EPA)-certified laboratory methods is also required. The eleven (11) technologies demonstrated included (1) EPA-standard soil sampling and laboratory mass-spectroscopy analyses, and currently-accepted field-screening techniques using (2) sodium-iodide scintillometers, (3) FIDLER low-energy scintillometers, and (4) a field-portable x-ray fluorescence spectrometer. Proposed advanced characterization techniques included (5) alpha-track detectors, (6) a high-energy beta scintillometer, (7) electret ionization chambers, (8) and (9) a high-resolution gamma-ray spectrometer in two different configurations, (10) a field-adapted laser ablation-inductively coupled plasma-atomic emission spectroscopy (ICP-AES) technique, and (11) a long-range alpha detector. Measurement reproducibility and the accuracy of each method were tested by acquiring numerous replicate measurements of total uranium activity at each of two ''standard sites'' located within the main field demonstration area. Meteorological variables including temperature, relative humidity. and 24-hour rainfall quantities were also recorded in conjunction with the standard-sites measurements

FORMING SELF-ASSEMBLED CELL ARRAYS AND MEASURING THE OXYGEN CONSUMPTION RATE OF A SINGLE LIVE CELL.

Science.gov (United States)

Etzkorn, James R; McQuaide, Sarah C; Anderson, Judy B; Meldrum, Deirdre R; Parviz, Babak A

2009-06-01

We report a method for forming arrays of live single cells on a chip using polymer micro-traps made of SU8. We have studied the toxicity of the microfabricated structures and the associated environment for two cell lines. We also report a method for measuring the oxygen consumption rate of a single cell using optical interrogation of molecular oxygen sensors placed in micromachined micro-wells by temporarily sealing the cells in the micro-traps. The new techniques presented here add to the collection of tools available for performing "single-cell" biology. A single-cell self-assembly yield of 61% was achieved with oxygen draw down rates of 0.83, 0.82, and 0.71 fmol/minute on three isolated live A549 cells.

Multicriteria evaluation of power plants impact on the living standard using the analytic hierarchy process

International Nuclear Information System (INIS)

Chatzimouratidis, Athanasios I.; Pilavachi, Petros A.

2008-01-01

The purpose of this study is to evaluate 10 types of power plants available at present including fossil fuel, nuclear as well as renewable-energy-based power plants, with regard to their overall impact on the living standard of local communities. Both positive and negative impacts of power plant operation are considered using the analytic hierarchy process (AHP). The current study covers the set of criteria weights considered typical for many local communities in many developed countries. The results presented here are illustrative only and user-defined weighting is required to make this study valuable for a specific group of users. A sensitivity analysis examines the most important weight variations, thus giving an overall view of the problem evaluation to every decision maker. Regardless of criteria weight variations, the five types of renewable energy power plant rank in the first five positions. Nuclear plants are in the sixth position when priority is given to quality of life and last when socioeconomic aspects are valued more important. Natural gas, oil and coal/lignite power plants rank between sixth and tenth position having slightly better ranking under priority to socioeconomic aspects

Standard guide for qualification of measurement methods by a laboratory within the nuclear industry

CERN Document Server

American Society for Testing and Materials. Philadelphia

2003-01-01

1.1 This guide provides guidance for selecting, validating, and qualifying measurement methods when qualification is required for a specific program. The recommended practices presented in this guide provide a major part of a quality assurance program for the laboratory data (see Fig. 1). Qualification helps to assure that the data produced will meet established requirements. 1.2 The activities intended to assure the quality of analytical laboratory measurement data are diagrammed in Fig. 1. Discussion and guidance related to some of these activities appear in the following sections: Section Selection of Measurement Methods 5 Validation of Measurement Methods 6 Qualification of Measurement Methods 7 Control 8 Personnel Qualification 9 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitati...

Exhaust Gas Temperature Measurements in Diagnostics of Turbocharged Marine Internal Combustion Engines Part I Standard Measurements

Directory of Open Access Journals (Sweden)

Korczewski Zbigniew

2015-01-01

Full Text Available The article discusses the problem of diagnostic informativeness of exhaust gas temperature measurements in turbocharged marine internal combustion engines. Theoretical principles of the process of exhaust gas flow in turbocharger inlet channels are analysed in its dynamic and energetic aspects. Diagnostic parameters are defined which enable to formulate general evaluation of technical condition of the engine based on standard online measurements of the exhaust gas temperature. A proposal is made to extend the parametric methods of diagnosing workspaces in turbocharged marine engines by analysing time-histories of enthalpy changes of the exhaust gas flowing to the turbocompressor turbine. Such a time-history can be worked out based on dynamic measurements of the exhaust gas temperature, performed using a specially designed sheathed thermocouple.

Quantitative angle-insensitive flow measurement using relative standard deviation OCT.

Science.gov (United States)

Zhu, Jiang; Zhang, Buyun; Qi, Li; Wang, Ling; Yang, Qiang; Zhu, Zhuqing; Huo, Tiancheng; Chen, Zhongping

2017-10-30

Incorporating different data processing methods, optical coherence tomography (OCT) has the ability for high-resolution angiography and quantitative flow velocity measurements. However, OCT angiography cannot provide quantitative information of flow velocities, and the velocity measurement based on Doppler OCT requires the determination of Doppler angles, which is a challenge in a complex vascular network. In this study, we report on a relative standard deviation OCT (RSD-OCT) method which provides both vascular network mapping and quantitative information for flow velocities within a wide range of Doppler angles. The RSD values are angle-insensitive within a wide range of angles, and a nearly linear relationship was found between the RSD values and the flow velocities. The RSD-OCT measurement in a rat cortex shows that it can quantify the blood flow velocities as well as map the vascular network in vivo .

The standard centrifuge method accurately measures vulnerability curves of long-vesselled olive stems.

Science.gov (United States)

Hacke, Uwe G; Venturas, Martin D; MacKinnon, Evan D; Jacobsen, Anna L; Sperry, John S; Pratt, R Brandon

2015-01-01

The standard centrifuge method has been frequently used to measure vulnerability to xylem cavitation. This method has recently been questioned. It was hypothesized that open vessels lead to exponential vulnerability curves, which were thought to be indicative of measurement artifact. We tested this hypothesis in stems of olive (Olea europea) because its long vessels were recently claimed to produce a centrifuge artifact. We evaluated three predictions that followed from the open vessel artifact hypothesis: shorter stems, with more open vessels, would be more vulnerable than longer stems; standard centrifuge-based curves would be more vulnerable than dehydration-based curves; and open vessels would cause an exponential shape of centrifuge-based curves. Experimental evidence did not support these predictions. Centrifuge curves did not vary when the proportion of open vessels was altered. Centrifuge and dehydration curves were similar. At highly negative xylem pressure, centrifuge-based curves slightly overestimated vulnerability compared to the dehydration curve. This divergence was eliminated by centrifuging each stem only once. The standard centrifuge method produced accurate curves of samples containing open vessels, supporting the validity of this technique and confirming its utility in understanding plant hydraulics. Seven recommendations for avoiding artefacts and standardizing vulnerability curve methodology are provided. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.

Teachable, high-content analytics for live-cell, phase contrast movies.

Science.gov (United States)

Alworth, Samuel V; Watanabe, Hirotada; Lee, James S J

2010-09-01

CL-Quant is a new solution platform for broad, high-content, live-cell image analysis. Powered by novel machine learning technologies and teach-by-example interfaces, CL-Quant provides a platform for the rapid development and application of scalable, high-performance, and fully automated analytics for a broad range of live-cell microscopy imaging applications, including label-free phase contrast imaging. The authors used CL-Quant to teach off-the-shelf universal analytics, called standard recipes, for cell proliferation, wound healing, cell counting, and cell motility assays using phase contrast movies collected on the BioStation CT and BioStation IM platforms. Similar to application modules, standard recipes are intended to work robustly across a wide range of imaging conditions without requiring customization by the end user. The authors validated the performance of the standard recipes by comparing their performance with truth created manually, or by custom analytics optimized for each individual movie (and therefore yielding the best possible result for the image), and validated by independent review. The validation data show that the standard recipes' performance is comparable with the validated truth with low variation. The data validate that the CL-Quant standard recipes can provide robust results without customization for live-cell assays in broad cell types and laboratory settings.

20 CFR 404.274 - What are the measuring periods we use to calculate cost-of-living increases?

Science.gov (United States)

2010-04-01

... ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts... determine whether there will be an automatic cost-of-living increase and if so, its amount. (b) Measuring... increase is effective; or (ii) The third calendar quarter of any year in which the last automatic increase...

Challenges of measuring quality in emergency management

DEFF Research Database (Denmark)

Lynette, Jennifer Elyse

2016-01-01

This paper describes the challenges and importance of measuring quality within the field of emergency response. Using quality as a standard of measurement to evaluate response efforts of trained personnel in emergency situations is necessary to increase effectiveness in the response phase...... of an emergency event. The intended outcome of utilizing quality as a tool of measurement is to save additional lives, property, and resources. The adoption of a system to measure quality can be utilized by multiple professions under the broader field of emergency response services. Quality is discussed in terms...

The cost-of-living index with trade barriers

OpenAIRE

Thomas von Brasch

2013-01-01

The standard cost-of-living index hinges on the assumption that there is free trade. Applying it to situations where trade barriers are present yields biased results with respect to a true cost-of-living index. Import price indices are particularly vulnerable to this bias since many of the goods included in these indices are characterised by either explicit or implicit trade barriers. In this article I generalise the cost-of-living index to also allow for barriers to trade in the form of quan...

[Measurement of CO diffusion capacity (II): Standardization and quality criteria].

Science.gov (United States)

Salcedo Posadas, A; Villa Asensi, J R; de Mir Messa, I; Sardón Prado, O; Larramona, H

2015-08-01

The diffusion capacity is the technique that measures the ability of the respiratory system for gas exchange, thus allowing a diagnosis of the malfunction of the alveolar-capillary unit. The most important parameter to assess is the CO diffusion capacity (DLCO). New methods are currently being used to measure the diffusion using nitric oxide (NO). There are other methods for measuring diffusion, although in this article the single breath technique is mainly referred to, as it is the most widely used and best standardized. Its complexity, its reference equations, differences in equipment, inter-patient variability and conditions in which the DLCO is performed, lead to a wide inter-laboratory variability, although its standardization makes this a more reliable and reproductive method. The practical aspects of the technique are analyzed, by specifying the recommendations to carry out a suitable procedure, the calibration routine, calculations and adjustments. Clinical applications are also discussed. An increase in the transfer of CO occurs in diseases in which there is an increased volume of blood in the pulmonary capillaries, such as in the polycythemia and pulmonary hemorrhage. There is a decrease in DLCO in patients with alveolar volume reduction or diffusion defects, either by altered alveolar-capillary membrane (interstitial diseases) or decreased volume of blood in the pulmonary capillaries (pulmonary embolism or primary pulmonary hypertension). Other causes of decreased or increased DLCO are also highlighted. Copyright © 2014 Asociación Española de Pediatría. Published by Elsevier España, S.L.U. All rights reserved.

Measuring the benefits of open standards standards : Beyond the motion Gerkens and the Dutch Court of Audit report1

NARCIS (Netherlands)

Egyedi, T.M.; Enserink, B.

2013-01-01

In 2010 the Dutch Parliament (motion Gerkens) requested the Court of Audit to measure the benefits of using open standards and open source software for government IT. In its report of 2011 the Dutch Court of Audit concluded that there were hardly any benefits to be gained. The Court's underlying

Nanosatellite standardization and modularization as an asset to space weather measurements

Science.gov (United States)

Voss, D.; Carssow, D.; Fritz, T. A.; Voss, H. D.

2009-12-01

The continuity of measurements from satellites in the Magnetosphere and Ionosphere is essential for the space weather community as pointed out by the US National Space Weather Program. Challenges to space budgets and the growing dependence upon space weather prediction have opened the door for extremely small satellites to play a large role in making these measurements. Standardization allows for modularity and the ability to lower satellite cost by reusing instrumentation and satellite systems without redesigning interfaces. Use of nanosatellites gives a designer the freedom to depart from the customary larger satellite design by deploying standardized interfaces throughout the spacecraft bus. Examples from the Boston University Student Satellite for Application and Training (BUSAT), the Thunderstorms and Effects Scientific and Technology nanosatellite (TEST), and the Loss Cone Imaging Instrument (LCI) will be provided. BUSAT is a five instrument nanosatellite with a nine pixel Imaging Electron Spectrometer, a Magnetometer, an Auroral Imager, a Very Low Frequency receiver, and a Langmuir Plasma Probe. Its purpose is to further the understanding of the coupling between energetic particles originating in the magnetosphere and their subsequent effects on the Ionosphere. In addition to their space weather science objective, BUSAT’s subsystems are based on the Cubesat concept and have been standardized, enabling them to be stacked in any orientation. Subsystems are not limited in size to the basic 1U cube, but are able to be any multiple of that size in any direction.

Simple circuit for precise measurement of live dead or clock time in gamma-ray spectrometry

International Nuclear Information System (INIS)

Hammer, W.; Sterlinski, S.

1976-01-01

The basic design features and characteristics of circuit are described in the paper. The circuit coupled to a multichannel analyser (MCA) enables one of times: live(Tsub(iota)), dead (Tsub(d)) or clock(Tsub(c)) to be measured precisely. Second one is measured by a built-in timer of MCA. Having the Tsub(c)/Tsub(iota) ratio and utilizing suitable mathematical formulas one can make the corrections for both main effects (dead-time and pile-up) which yield counting losses in gamma-ray spectrometry at high and/or variable activities. Two examples of the dead-time and pile-up corrections by using the new circuit are presented in this paper. (author)

Accuracy of standard craniometric measurements using multiple data formats.

Science.gov (United States)

Richard, Adam H; Parks, Connie L; Monson, Keith L

2014-09-01

With continuing advancements in biomedical imaging technologies, anthropologists are increasingly making use of data derived from indirect measurement and analysis of skeletal material. To that end, the purpose of this study was to test the reliability of 26 standard craniometric measurements routinely utilized in forensic casework across several different imaging technologies. Measurements from five crania of known individuals were collected in duplicate by two anthropologists via computed tomography (CT) scans and three-dimensional (3D) laser scans of the known skulls. The laser scans were also used to create prototype models of the known skulls. These prototypes were, themselves, laser-scanned, and measurements were also collected from the prototypes and the laser scans of the prototypes. Measurement sets from each technology were then compared with one another using the previously collected osteometric measurements taken on the crania themselves as the ground truth. indicate that, while the majority of measurements showed no significant differences across data formats, a handful were found to be problematic for particular technologies. For instance, measurements taken in a supero-inferior direction (e.g., BBH, OBH) from CT scans were prone to greater deviation from direct measurements of the cranium than other technologies, especially for CT scans taken at 5 mm thickness and increment. Also, several measurements defined by Type 1 landmarks, particularly those occurring at complicated or indistinct suture junctures (e.g., ASB, ZMB), were found to have high variance across all technologies while measurements based on Type 3 landmarks proved to be highly reproducible. This is contrary to measurements taken directly on crania, in which measures defined by Type 1 landmarks are typically the most reliable, likely attributable to diminished or totally obscured suture definition in the scan data. If medical imaging data are to be increasingly utilized in

Measurement uncertainty. A practical guide for Secondary Standards Dosimetry Laboratories

International Nuclear Information System (INIS)

2008-05-01

The need for international traceability for radiation dose measurements has been understood since the early nineteen-sixties. The benefits of high dosimetric accuracy were recognized, particularly in radiotherapy, where the outcome of treatments is dependent on the radiation dose delivered to patients. When considering radiation protection dosimetry, the uncertainty may be greater than for therapy, but proper traceability of the measurements is no less important. To ensure harmonization and consistency in radiation measurements, the International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) created a Network of Secondary Standards Dosimetry Laboratories (SSDLs) in 1976. An SSDL is a laboratory that has been designated by the competent national authorities to undertake the duty of providing the necessary link in the traceability chain of radiation dosimetry to the international measurement system (SI, for Systeme International) for radiation metrology users. The role of the SSDLs is crucial in providing traceable calibrations; they disseminate calibrations at specific radiation qualities appropriate for the use of radiation measuring instruments. Historically, although the first SSDLs were established mainly to provide radiotherapy level calibrations, the scope of their work has expanded over the years. Today, many SSDLs provide traceability for radiation protection measurements and diagnostic radiology in addition to radiotherapy. Some SSDLs, with the appropriate facilities and expertise, also conduct quality audits of the clinical use of the calibrated dosimeters - for example, by providing postal dosimeters for dose comparisons for medical institutions or on-site dosimetry audits with an ion chamber and other appropriate equipment. The requirements for traceable and reliable calibrations are becoming more important. For example, for international trade where radiation products are manufactured within strict quality control systems, it is

Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements

CERN Document Server

American Society for Testing and Materials. Philadelphia

2004-01-01

1.1 This test method covers an experimental procedure for checking experimental technique and instrumentation. If followed, this test method will provide repeatable potentiostatic and potentiodynamic anodic polarization measurements that will reproduce data determined by others at other times and in other laboratories provided all laboratories are testing reference samples from the same lot of Type 430 stainless steel. 1.2 Values stated in SI units are to be regarded as the standard. Inch-pound units given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Measurement of acetylcholinesterase (AChE) activity in living brain by positron emission tomography (PET)

Energy Technology Data Exchange (ETDEWEB)

Irie, Toshiaki [National Inst. of Radiological Sciences, Chiba (Japan)

1999-07-01

Central cholinergic neuronal system has been known to be related to learning and memory, and its deficit is found in the brain of Alzheimer's disease (AD) and other degenerative disorders. Postmortem studies have shown that acetylcholinesterase (AChE), one of biochemical markers of central cholinergic nerve system, is consistently reduced in the cerebral cortex of patients with Alzheimer's disease (AD). Non-invasive mapping and/or measuring AChE activity in the living brain by positron emission tomography (PET) would be a useful tool for assessment of cholinergic dysfunction in AD and other disorders, and provide a direct method for validation of therapeutic efficacy of drugs, AChE inhibitors. We have challenged to measure AChE activity using tracers of substrate type, radiolabelled acetylcholine analogs, which are lipophilic enough to go across blood brain barrier and are metabolically trapped by AChE in the brain. The analogs designed, N-methylpiperidyl esters, were evaluated in terms of their metabolic rate and specificity against AChE. Studies examining the response to AChE activity showed metabolic accumulation of some analogs responded well to changes in cortical AChE activity in an animal model of AD. The study was further applied to living human by PET using [{sup 11}C]N-methylpiperidyl-4-acetate (MP4A), which was chosen on the basis of its reactivity and specificity suitable for the human cortical AChE. Regional cerebral metabolic rate of MP4A reflecting AChE activity was quantitatively determined using three compartment model analysis of dynamic PET data and the arterial input function obtained by TLC-radioluminography or plasma samples. The kinetic analyses showed that AChE activities estimated were well agree with those of postmortem examination in cerebral cortices and thalamus in healthy subjects, and that there was significant reduction of cortical AChE activity in patients with AD. The results suggest feasibility of the present method for

EURATOM work on standard defects and dimensional measurements in neutron radiography of nuclear fuel elements

International Nuclear Information System (INIS)

Domanus, J.C.

1981-10-01

In 1979 a working group on neutron radiography was formed at Euratom. The purpose of this group is the standardization of neutron radiographic methods in the field of nuclear fuel. First priority was given to the development of image quality indicators and standard objects for the determination of accuracy of dimensional measurements from neutron radiographs. For that purpose beam purity and sensitivity indicators as well as a calibration fuel pin were designed and fabricated at Risoe. All the Euratom neutron radiography centers have recieved the above items for comparative neutron radiography. The measuring results obtained, using various measuring apparatus, will form the basis to formulate conclusions about the best measuring methods and instruments to be used in that field. (author)

A novel method to remotely measure food intake of free-living individuals in real time: the remote food photography method.

Science.gov (United States)

Martin, Corby K; Han, Hongmei; Coulon, Sandra M; Allen, H Raymond; Champagne, Catherine M; Anton, Stephen D

2009-02-01

The aim of the present study was to report the first reliability and validity tests of the remote food photography method (RFPM), which consists of camera-enabled cell phones with data transfer capability. Participants take and transmit photographs of food selection and plate waste to researchers/clinicians for analysis. Following two pilot studies, adult participants (n 52; BMI 20-35 kg/m2 inclusive) were randomly assigned to the dine-in or take-out group. Energy intake (EI) was measured for 3 d. The dine-in group ate lunch and dinner in the laboratory. The take-out group ate lunch in the laboratory and dinner in free-living conditions (participants received a cooler with pre-weighed food that they returned the following morning). EI was measured with the RFPM and by directly weighing foods. The RFPM was tested in laboratory and free-living conditions. Reliability was tested over 3 d and validity was tested by comparing directly weighed EI to EI estimated with the RFPM using Bland-Altman analysis. The RFPM produced reliable EI estimates over 3 d in laboratory (r 0.62; P 0.93; P < 0.0001). In two laboratory-based validity tests, the RFPM underestimated EI by - 4.7 % (P = 0.046) and - 5.5 % (P = 0.076). In free-living conditions, the RFPM underestimated EI by - 6.6 % (P = 0.017). Bias did not differ by body weight or age. The RFPM is a promising new method for accurately measuring the EI of free-living individuals. Error associated with the method is small compared with self-report methods.

Home-based family intervention increases knowledge, communication and living donation rates: a randomized controlled trial.

Science.gov (United States)

Ismail, S Y; Luchtenburg, A E; Timman, R; Zuidema, W C; Boonstra, C; Weimar, W; Busschbach, J J V; Massey, E K

2014-08-01

Our aim was to develop and test an educational program to support well-informed decision making among patients and their social network regarding living donor kidney transplantation (LDKT). One hundred sixty-three patients who were unable to find a living donor were randomized to standard care or standard care plus home-based education. In the education condition, patients and members of their social network participated in home-based educational meetings and discussed renal replacement therapy options. Patients and invitees completed pre-post self-report questionnaires measuring knowledge, risk perception, communication, self-efficacy and subjective norm. LDKT activities were observed for 6 months postintervention. Patients in the experimental group showed significantly more improvements in knowledge (p communication (p = 0.012) compared with the control group. The invitees showed pre-post increases in knowledge (p decision making and promotes access to LDKT. © Copyright 2014 The American Society of Transplantation and the American Society of Transplant Surgeons.

Characterization of textile electrodes and conductors using standardized measurement setups

International Nuclear Information System (INIS)

Beckmann, L; Neuhaus, C; Medrano, G; Walter, M; Leonhardt, S; Jungbecker, N; Gries, T

2010-01-01

Textile electrodes and conductors are being developed and used in different monitoring scenarios, such as ECG or bioimpedance spectroscopy measurements. Compared to standard materials, conductive textile materials offer improved wearing comfort and enable long-term measurements. Unfortunately, the development and investigation of such materials often suffers from the non-reproducibility of the test scenarios. For example, the materials are generally tested on human skin which is difficult since the properties of human skin differ for each person and can change within hours. This study presents two test setups which offer reproducible measurement procedures for the systematic analysis of textile electrodes and conductors. The electrode test setup was designed with a special skin dummy which allows investigation of not only the electrical properties of textile electrodes but also the contact behavior between electrode and skin. Using both test setups, eight textile electrodes and five textile conductors were analyzed and compared

The impact of statistical adjustment on conditional standard errors of measurement in the assessment of physician communication skills.

Science.gov (United States)

Raymond, Mark R; Clauser, Brian E; Furman, Gail E

2010-10-01

The use of standardized patients to assess communication skills is now an essential part of assessing a physician's readiness for practice. To improve the reliability of communication scores, it has become increasingly common in recent years to use statistical models to adjust ratings provided by standardized patients. This study employed ordinary least squares regression to adjust ratings, and then used generalizability theory to evaluate the impact of these adjustments on score reliability and the overall standard error of measurement. In addition, conditional standard errors of measurement were computed for both observed and adjusted scores to determine whether the improvements in measurement precision were uniform across the score distribution. Results indicated that measurement was generally less precise for communication ratings toward the lower end of the score distribution; and the improvement in measurement precision afforded by statistical modeling varied slightly across the score distribution such that the most improvement occurred in the upper-middle range of the score scale. Possible reasons for these patterns in measurement precision are discussed, as are the limitations of the statistical models used for adjusting performance ratings.

Equity-regarding poverty measures: differences in needs and the role of equivalence scales

OpenAIRE

Udo Ebert

2010-01-01

The paper investigates the definition of equity-regarding poverty measures when there are different household types in the population. It demonstrates the implications of a between-type regressive transfer principle for poverty measures, for the choice of poverty lines, and for the measurement of living standard. The role of equivalence scales, which are popular in empirical work on poverty measurement, is clarified.

Standard operation procedures for conducting the on-the-road driving test, and measurement of the standard deviation of lateral position (SDLP).

Science.gov (United States)

Verster, Joris C; Roth, Thomas

2011-01-01

This review discusses the methodology of the standardized on-the-road driving test and standard operation procedures to conduct the test and analyze the data. The on-the-road driving test has proven to be a sensitive and reliable method to examine driving ability after administration of central nervous system (CNS) drugs. The test is performed on a public highway in normal traffic. Subjects are instructed to drive with a steady lateral position and constant speed. Its primary parameter, the standard deviation of lateral position (SDLP), ie, an index of 'weaving', is a stable measure of driving performance with high test-retest reliability. SDLP differences from placebo are dose-dependent, and do not depend on the subject's baseline driving skills (placebo SDLP). It is important that standard operation procedures are applied to conduct the test and analyze the data in order to allow comparisons between studies from different sites.

Development of radioactive standards in epoxy matrix for the control of quality of activimeters

International Nuclear Information System (INIS)

Fragoso, Maria da Conceicao de Farias; Monteiro, Luciane Carollyne de Oliveira Reis; Oliveira, Marcia Liane de

2016-01-01

In the present study, a new approach for development of the standards for positron emitting radionuclides in epoxy matrix is presented. Different formulations were prepared using epoxy resin (bisphenol A diglycidyl ether - DGEBA) and curing agents, to immobilize the radioactive material. The efficiency curve and standard sample methods were applied for activity determination of a long-lived positron emitter ("2"2Na). Satisfactory results were obtained in the 3"r"d combination. Thus, these radioactive standards can be used to evaluate the metrological behavior of the systems used for the measurement of the radiopharmaceuticals (activimeters) in the production centers and in nuclear medicine services. (author)

The physical environment influences neuropsychiatric symptoms and other outcomes in assisted living residents.

Science.gov (United States)

Bicket, Mark C; Samus, Quincy M; McNabney, Mathew; Onyike, Chiadi U; Mayer, Lawrence S; Brandt, Jason; Rabins, Peter; Lyketsos, Constantine; Rosenblatt, Adam

2010-10-01

Although the number of elderly residents living in assisted living (AL) facilities is rising, few studies have examined the AL physical environment and its impact on resident well-being. We sought to quantify the relationship of AL physical environment with resident outcomes including neuropsychiatric symptoms (NPS), quality of life (QOL), and fall risk, and to compare the effects for demented and non-demented residents. Prospective cohort study of a stratified random sample of 326 AL residents living in 21 AL facilities. Measures included the Therapeutic Environmental Screening Scale for Nursing Homes and Residential Care (TESS-NH/RC) to rate facilities and in-person assessment of residents for diagnosis (and assessment of treatment) of dementia, ratings on standardized clinical, cognitive, and QOL measures. Regression models compared environmental measures with outcomes. TESS-NH/RC is modified into a scale for rating the AL physical environment AL-EQS. The AL Environmental Quality Score (AL-EQS) was strongly negatively associated with Neuropsychiatric Inventory (NPI) total score (p environment of AL facilities likely affects NPS and QOL in AL residents, and the effect may be stronger for residents without dementia than for residents with dementia. Environmental manipulations that increase resident privacy, as well as implementing call buttons and telephones, may improve resident well-being. Copyright © 2010 John Wiley & Sons, Ltd.

9 CFR 113.64 - General requirements for live bacterial vaccines.

Science.gov (United States)

2010-01-01

... bacterial vaccines. 113.64 Section 113.64 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... STANDARD REQUIREMENTS Live Bacterial Vaccines § 113.64 General requirements for live bacterial vaccines... bacterial vaccine shall meet the requirements in this section. (a) Purity test. Final container samples of...

Anonymous living liver donation: donor profiles and outcomes.

Science.gov (United States)

Reichman, T W; Fox, A; Adcock, L; Wright, L; Abbey, S E; Levy, G; Grant, D R

2010-09-01

There are no published series of the assessment process, profiles and outcomes of anonymous, directed or nondirected live liver donation. The outcomes of 29 consecutive potential anonymous liver donors at our center were assessed. We used our standard live liver assessment process, augmented with the following additional acceptance criteria: a logical rationale for donation, a history of social altruism, strong social supports and a willingness to maintain confidentiality of patient information. Seventeen potential donors were rejected and 12 donors were ultimately accepted (six male, six female). All donors were strongly motivated by a desire and sense of responsibility to help others. Four donations were directed toward recipients who undertook media appeals. The donor operations included five left lateral segmentectomies and seven right hepatectomies. The overall donor morbidity was 40% with one patient having a transient Clavien level 3 complication (a pneumothorax). All donors are currently well. None expressed regret about their decision to donate, and all volunteered the opinion that donation had improved their lives. The standard live liver donor assessment process plus our additional requirements appears to provide a robust assessment process for the selection of anonymous live liver donors. Acceptance of anonymous donors enlarges the donor liver pool. © 2010 The Authors Journal compilation © 2010 The American Society of Transplantation and the American Society of Transplant Surgeons.

Measurement of 50 Hz magnetic fields in some Norwegian households

International Nuclear Information System (INIS)

Karlsen, J.; Johnsson, A.

1987-01-01

An examination of 50 Hz magnetic fields has been made in ten different Norwegian dwellings. The aim was to measure the general background level of the 50 Hz magnetic fields. The investigation followed a protocol also used in Swedish measurements, and direct comparisons are therefore possible. A portable, commercial coil instrument was used. In september 1986 and January 1987 the magnetic fields in living rooms, sleeping rooms, and kitchens were measured according to the standardized procedure. Current consumption and temperature at the time of the measurements were also recorded. A clear correlation was noted between the magnetic field values and the current consumption. The mean values of the magnetic fields in the living rooms, sleeping rooms and kitchens, were 12 nT, 11 nT and 160 nT, respectively. The living and sleeping room values can be regarded as very low, and they are much lower than corresponding Swedish values. The kitchen values in the two countries seem, however, to be of the same order of magnitude. The report discusses the need for additional measurements in Norwegian houses

Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This test method covers procedures measuring reaction rates by the activation reaction 27Al(n,α)24Na. 1.2 This activation reaction is useful for measuring neutrons with energies above approximately 6.5 MeV and for irradiation times up to about 2 days (for longer irradiations, see Practice E261). 1.3 With suitable techniques, fission-neutron fluence rates above 106 cm−2·s−1 can be determined. 1.4 Detailed procedures for other fast neutron detectors are referenced in Practice E261. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Measurement of mental attention: Assessing a cognitive component underlying performance on standardized intelligence tests

OpenAIRE

Steven J. Howard; Janice Johnson; Juan Pascual-Leone

2013-01-01

Despite the widespread use of standardized IQ tests to measure human intelligence, problems with such measures have led some to suggest that better indices may derive from measurement of cognitive processes underlying performance on IQ tests (e.g., working memory capacity). However, measures from both approaches may exhibit performance biases in favour of majority groups, due to the influence of prior learning and experience. Mental attentional (M-) capacity is proposed to be a causal factor ...

Precision measurements of Standard Model parameters and Review of Drell-Yan and vector boson plus jets measurements with the ATLAS detector

International Nuclear Information System (INIS)

Calace, Noemi

2016-01-01

The inclusive productions of the W and the on- or off-shell Z/γ* bosons are standard candles at hadron colliders, while the productions of light and heavy-flavour jets in association with a W or a Z boson are important processes to study quantum-chromodynamics (QCD) in multi-scale environments. The measurements of their production cross-sections integrated and differential in several variables have been measured at 7 and 8 TeV centre-of-mass energies and are compared to high-order QCD calculations and Monte Carlo simulations. These measurements have an impact on our knowledge of the parton densities of the proton, and test soft resummation effects and hard emissions for small and large momentum transfers and in multi-scale processes. Precision measurements of fundamental Standard Model parameters in Drell-Yan final states are also performed to describe the angular distributions of the decay lepton. Run-1 studies carried out by the ATLAS Collaboration are re-viewed and first LHC Run-2 results are included

Formation and psychometric evaluation of a health-related quality of life instrument for children living with HIV in India.

Science.gov (United States)

Das, Aritra; Detels, Roger; Afifi, Abdelmonem A; Javanbakht, Marjan; Sorvillo, Frank; Panda, Samiran

2018-03-01

In-depth interviews and focus group discussions were conducted to inform the development of an instrument to measure the health-related quality of life of children living with HIV. The QOL-CHAI instrument consists of four generic core scales of the "Pediatric Quality of Life Inventory" and two HIV-targeted scales-"symptoms" and "discrimination." A piloting exercise involving groups of children living with HIV and HIV-negative children born to HIV-infected parents provided evidence for the acceptable psychometric properties and usability of the instrument. It is expected that the QOL-CHAI can serve well as a brief, standardized, and culturally appropriate instrument for assessing health-related quality of life of Indian children living with HIV.

Standards for reference reactor physics measurements

International Nuclear Information System (INIS)

Harris, D.R.; Cokinos, D.M.; Uotinen, V.

1990-01-01

Reactor physics analysis methods require experimental testing and confirmation over the range of practical reactor configurations and states. This range is somewhat limited by practical fuel types such as actinide oxides or carbides enclosed in metal cladding. On the other hand, this range continues to broaden because of the trend of using higher enrichment, if only slightly enriched, electric utility fuel. The need for experimental testing of the reactor physics analysis methods arises in part because of the continual broadening of the range of core designs, and in part because of the nature of the analysis methods. Reactor physics analyses are directed primarily at the determination of core reactivities and reaction rates, the former largely for reasons of reactor control, and the latter largely to ensure that material limitations are not violated. Errors in these analyses can be regarded as being from numerics, from the data base, and from human factors. For numerical, data base, and human factor reasons, then, it is prudent and customary to qualify reactor physical analysis methods against experiments. These experiments can be treated as being at low power or at high power, and each of these types is subject to an American National Standards Institute standard. The purpose of these standards is to aid in improving and maintaining adequate quality in reactor physics methods, and it is from this point of view that the standards are examined here

Freshly induced short-lived gamma-ray activity as a measure of fission rates in lightly re-irradiated spent fuel

Energy Technology Data Exchange (ETDEWEB)

Kroehnert, H., E-mail: hanna.kroehnert@psi.c [Paul Scherrer Institut (PSI), OPRA-E07, CH-5232 Villigen (Switzerland); Perret, G., E-mail: gregory.perret@psi.c [Paul Scherrer Institut (PSI), OPRA-E07, CH-5232 Villigen (Switzerland); Murphy, M.F., E-mail: mike.murphy@psi.c [Paul Scherrer Institut (PSI), OPRA-E07, CH-5232 Villigen (Switzerland); Chawla, R., E-mail: rakesh.chawla@epfl.c [Paul Scherrer Institut (PSI), OPRA-E07, CH-5232 Villigen (Switzerland); Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015 Lausanne (Switzerland)

2010-12-01

A new measurement technique has been developed to determine fission rates in burnt fuel, following re-irradiation in a zero-power research reactor. The development has been made in the frame of the LIFE-PROTEUS program at the Paul Scherrer Institute, which aims at characterizing the interfaces between fresh and highly burnt fuel assemblies in modern LWRs. To discriminate against the high intrinsic gamma-ray activity of the burnt fuel, the proposed measurement technique uses high-energy gamma-rays, above 2000 keV, emitted by short-lived fission products freshly produced in the fuel. To demonstrate the feasibility of this technique, a fresh UO{sub 2} sample and a 36 GWd/t burnt UO{sub 2} sample were irradiated in the PROTEUS reactor and their gamma-ray activities were recorded directly after irradiation. For both fresh and the burnt fuel samples, relative fission rates were derived for different core positions, based on the short-lived {sup 142}La (2542 keV), {sup 89}Rb (2570 keV), {sup 138}Cs (2640 keV) and {sup 95}Y (3576 keV) gamma-ray lines. Uncertainties on the inter-position fission rate ratios were mainly due to the uncertainties on the net-area of the gamma-ray peaks and were about 1-3% for the fresh sample, and 3-6% for the burnt one. Thus, for the first time, it has been shown that the short-lived gamma-ray activity, induced in burnt fuel by irradiation in a zero-power reactor, can be used as a quantitative measure of the fission rate. For both fresh and burnt fuel, the measured results agreed, within the uncertainties, with Monte Carlo (MCNPX) predictions.

Towards Uniform Accelerometry Analysis: A Standardization Methodology to Minimize Measurement Bias Due to Systematic Accelerometer Wear-Time Variation

Directory of Open Access Journals (Sweden)

Tarun R. Katapally, Nazeem Muhajarine

2014-06-01

Full Text Available Accelerometers are predominantly used to objectively measure the entire range of activity intensities – sedentary behaviour (SED, light physical activity (LPA and moderate to vigorous physical activity (MVPA. However, studies consistently report results without accounting for systematic accelerometer wear-time variation (within and between participants, jeopardizing the validity of these results. This study describes the development of a standardization methodology to understand and minimize measurement bias due to wear-time variation. Accelerometry is generally conducted over seven consecutive days, with participants' data being commonly considered 'valid' only if wear-time is at least 10 hours/day. However, even within ‘valid’ data, there could be systematic wear-time variation. To explore this variation, accelerometer data of Smart Cities, Healthy Kids study (www.smartcitieshealthykids.com were analyzed descriptively and with repeated measures multivariate analysis of variance (MANOVA. Subsequently, a standardization method was developed, where case-specific observed wear-time is controlled to an analyst specified time period. Next, case-specific accelerometer data are interpolated to this controlled wear-time to produce standardized variables. To understand discrepancies owing to wear-time variation, all analyses were conducted pre- and post-standardization. Descriptive analyses revealed systematic wear-time variation, both between and within participants. Pre- and post-standardized descriptive analyses of SED, LPA and MVPA revealed a persistent and often significant trend of wear-time’s influence on activity. SED was consistently higher on weekdays before standardization; however, this trend was reversed post-standardization. Even though MVPA was significantly higher on weekdays both pre- and post-standardization, the magnitude of this difference decreased post-standardization. Multivariable analyses with standardized SED, LPA and

Damage measurement of structural material by electron backscatter diffraction. Quantification of measurement quality toward standardization of measurement procedure

International Nuclear Information System (INIS)

Kamaya, Masayuki

2011-01-01

process, almost identical local misorientations distributions were obtained under different measurement conditions. Finally, for standardization of the measurement procedure of the local misorientation, present knowledge and points to note about measurements were summarized. (author)

Saving lives in health: global estimates and country measurement.

Directory of Open Access Journals (Sweden)

Daniel Low-Beer

2013-10-01

Full Text Available Daniel Low-Beer and colleagues provide a response from The Global Fund on the PLOS Medicine article by David McCoy and colleagues critiquing their lives saved assessment models. Please see later in the article for the Editors' Summary.

Standardization of radon measurements

International Nuclear Information System (INIS)

Matuszek, J.M.; Hutchinson, J.A.; Lance, B.H.; Virgil, M.G.; Mahoney, R.J.

1988-01-01

Radon escaping from soil into homes appears to present the single greatest source of radiation exposure that most people will ever face. Measurement protocols for the relatively inert gas inextricably link the method of collection with the counting of the specimen. The most commonly used methods depend on the measurement of dislocation sites on plastic α-track detectors or on the adsorption of radon onto activated charcoal for subsequent counting of the γ-rays produced by decay of the radon progeny. The uncertainties inherent to the radon-measurement methods used commercially in the United States are far greater than those for measurements of other environmental radionuclides. The results of this preliminary study raise doubts as to whether existing proficiency-testing programs can provide assurance that radon-measurement methods are representative of actual conditions in any dwelling. 17 refs., 1 figs., 4 tabs

VALIDATION OF MITRAL VALVE ANNULUS DIMENSIONS MEASURED BY 2D TRANS-THORACIC ECHOCARDIOGRAPHY WITH GOLD STANDARD DIRECT INTRA-OPERATIVE MEASUREMENT

OpenAIRE

Praveen; Yadav; Ankur; Saket; Kaushal

2014-01-01

CONTEXT: Precise estimation of Mitral valve annulus dimensions preoperatively through Echocardiography is of paramount importance in replacement/repair surgeries. However a frequent disagreement was experienced between anticipated size of prosthetic valve based on echocardiography and actual valve size. This fact encouraged the authors to validate the measurements through echocardiography with gold-standard direct intra operative measurement. AIM: To compare the mitral val...

77 FR 37409 - Request for Domains, Instruments, and Measures for Development of a Standardized Instrument for...

Science.gov (United States)

2012-06-21

... experience as well. On both issues, CMS is interested in instruments and items which can measure quality of... Measures for Development of a Standardized Instrument for Use in Public Reporting of Enrollee Satisfaction..., communication, coordination of care, customer service), instruments, and measures for measuring the level of...

Measurement of the fine-structure constant as a test of the Standard Model

Science.gov (United States)

Parker, Richard H.; Yu, Chenghui; Zhong, Weicheng; Estey, Brian; Müller, Holger

2018-04-01

Measurements of the fine-structure constant α require methods from across subfields and are thus powerful tests of the consistency of theory and experiment in physics. Using the recoil frequency of cesium-133 atoms in a matter-wave interferometer, we recorded the most accurate measurement of the fine-structure constant to date: α = 1/137.035999046(27) at 2.0 × 10‑10 accuracy. Using multiphoton interactions (Bragg diffraction and Bloch oscillations), we demonstrate the largest phase (12 million radians) of any Ramsey-Bordé interferometer and control systematic effects at a level of 0.12 part per billion. Comparison with Penning trap measurements of the electron gyromagnetic anomaly ge ‑ 2 via the Standard Model of particle physics is now limited by the uncertainty in ge ‑ 2; a 2.5σ tension rejects dark photons as the reason for the unexplained part of the muon’s magnetic moment at a 99% confidence level. Implications for dark-sector candidates and electron substructure may be a sign of physics beyond the Standard Model that warrants further investigation.

Standard practices for verification of displacement measuring systems and devices used in material testing machines

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E83. 1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems m...

5 CFR 845.305 - Ordinary and necessary living expenses.

Science.gov (United States)

2010-01-01

... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES RETIREMENT SYSTEM-DEBT COLLECTION Standards for Waiver... necessary living expenses include rent, mortgage payments, utilities, maintenance, transportation, food...

New Primary Standards for Establishing SI Traceability for Moisture Measurements in Solid Materials

Science.gov (United States)

Heinonen, M.; Bell, S.; Choi, B. Il; Cortellessa, G.; Fernicola, V.; Georgin, E.; Hudoklin, D.; Ionescu, G. V.; Ismail, N.; Keawprasert, T.; Krasheninina, M.; Aro, R.; Nielsen, J.; Oğuz Aytekin, S.; Österberg, P.; Skabar, J.; Strnad, R.

2018-01-01

A European research project METefnet addresses a fundamental obstacle to improving energy-intensive drying process control: due to ambiguous reference analysis methods and insufficient methods for estimating uncertainty in moisture measurements, the achievable accuracy in the past was limited and measurement uncertainties were largely unknown. This paper reports the developments in METefnet that provide a sound basis for the SI traceability: four new primary standards for realizing the water mass fraction were set up, analyzed and compared to each other. The operation of these standards is based on combining sample weighing with different water vapor detection techniques: cold trap, chilled mirror, electrolytic and coulometric Karl Fischer titration. The results show that an equivalence of 0.2 % has been achieved between the water mass fraction realizations and that the developed methods are applicable to a wide range of materials.

Strong resistance of Arabidopsis thaliana and Raphanus sativus seeds for ionizing radiation as studied by ESR, ENDOR, ESE spectroscopy and germination measurement: Effect of long-lived and super-long-lived radicals

Energy Technology Data Exchange (ETDEWEB)

Kumagai, Jun E-mail: kumagai@apchem.nagoya-u.ac.jp; Katoh, Hiromi; Kumada, Takayuki; Tanaka, Atsushi; Tano, Shigemitsu; Miyazaki, Tetsuo

2000-01-01

Resistance of seeds for ionizing radiation effects on Arabidopsis thaliana and Raphanus sativus seeds were investigated by ESR, ENDOR, ESE spectroscopy and germination measurement. Two types of free radicals, such as long-lived (LL) and super-long-lived (SL) radicals, were produced by the {gamma}-irradiation in the seeds. More than 90% of the 1 kGy-irradiated-seeds can germinate probably by decreasing the LL radicals by absorbing water. 10 kGy-irradiated-seeds cannot germinate at all probably due to the existence of significant amounts of the SL radicals even after absorbing water. (author)

Measurement of Standard Model VBS/VBF production with the ATLAS and CMS detectors

CERN Document Server

Li, Shu; The ATLAS collaboration

2017-01-01

Proceeding for the poster presentation at Blois2017, France on the topic of "Measurements of Standard Model VBS/VBF productions with ATLAS+CMS detectors" (ATL-PHYS-SLIDE-2017-333 https://cds.cern.ch/record/2267458) Deadline: 15/10/2017

A living wage for research subjects.

Science.gov (United States)

Phillips, Trisha B

2011-01-01

Offering cash payments to research subjects is a common recruiting method, but this practice continues to be controversial because of its potential to compromise the protection of human subjects. Federal regulations and guidelines currently allow researchers to pay subjects for participation, but they say very little about how much researchers can pay their subjects. This paper argues that the federal regulations and guidelines should implement a standard payment formula. It argues for a wage payment model, and critically examines three candidates for a base wage: the nonfarm production wage, the FLSA minimum wage, and a living wage. After showing that the nonfarm production wage is too high to satisfy ethical criteria, and the minimum wage is too low, this paper concludes that the wage payment model with a base wage equivalent to a living wage is the best candidate for a standard payment formula in human subjects research. © 2011 American Society of Law, Medicine & Ethics, Inc.

A computer aided measurement method for unstable pelvic fractures based on standardized radiographs

International Nuclear Information System (INIS)

Zhao, Jing-xin; Zhao, Zhe; Zhang, Li-cheng; Su, Xiu-yun; Du, Hai-long; Zhang, Li-ning; Zhang, Li-hai; Tang, Pei-fu

2015-01-01

To set up a method for measuring radiographic displacement of unstable pelvic ring fractures based on standardized X-ray images and then test its reliability and validity using a software-based measurement technique. Twenty-five patients that were diagnosed as AO/OTA type B or C pelvic fractures with unilateral pelvis fractured and dislocated were eligible for inclusion by a review of medical records in our clinical centre. Based on the input pelvic preoperative CT data, the standardized X-ray images, including inlet, outlet, and anterior-posterior (AP) radiographs, were simulated using Armira software (Visage Imaging GmbH, Berlin, Germany). After representative anatomic landmarks were marked on the standardized X-ray images, the 2-dimensional (2D) coordinates of these points could be revealed in Digimizer software (Model: Mitutoyo Corp., Tokyo, Japan). Subsequently, we developed a formula that indicated the translational and rotational displacement patterns of the injured hemipelvis. Five separate observers calculated the displacement outcomes using the established formula and determined the rotational patterns using a 3D-CT model based on their overall impression. We performed 3D reconstruction of all the fractured pelvises using Mimics (Materialise, Haasrode, Belgium) and determined the translational and rotational displacement using 3-matic suite. The interobserver reliability of the new method was assessed by comparing the continuous measure and categorical outcomes using intraclass correlation coefficient (ICC) and kappa statistic, respectively. The interobserver reliability of the new method for translational and rotational measurement was high, with both ICCs above 0.9. Rotational outcome assessed by the new method was the same as that concluded by 3-matic software. The agreement for rotational outcome among orthopaedic surgeons based on overall impression was poor (kappa statistic, 0.250 to 0.426). Compared with the 3D reconstruction outcome, the

Detecting free-living steps and walking bouts: validating an algorithm for macro gait analysis.

Science.gov (United States)

Hickey, Aodhán; Del Din, Silvia; Rochester, Lynn; Godfrey, Alan

2017-01-01

Research suggests wearables and not instrumented walkways are better suited to quantify gait outcomes in clinic and free-living environments, providing a more comprehensive overview of walking due to continuous monitoring. Numerous validation studies in controlled settings exist, but few have examined the validity of wearables and associated algorithms for identifying and quantifying step counts and walking bouts in uncontrolled (free-living) environments. Studies which have examined free-living step and bout count validity found limited agreement due to variations in walking speed, changing terrain or task. Here we present a gait segmentation algorithm to define free-living step count and walking bouts from an open-source, high-resolution, accelerometer-based wearable (AX3, Axivity). Ten healthy participants (20-33 years) wore two portable gait measurement systems; a wearable accelerometer on the lower-back and a wearable body-mounted camera (GoPro HERO) on the chest, for 1 h on two separate occasions (24 h apart) during free-living activities. Step count and walking bouts were derived for both measurement systems and compared. For all participants during a total of almost 20 h of uncontrolled and unscripted free-living activity data, excellent relative (rho  ⩾  0.941) and absolute (ICC (2,1)   ⩾  0.975) agreement with no presence of bias were identified for step count compared to the camera (gold standard reference). Walking bout identification showed excellent relative (rho  ⩾  0.909) and absolute agreement (ICC (2,1)   ⩾  0.941) but demonstrated significant bias. The algorithm employed for identifying and quantifying steps and bouts from a single wearable accelerometer worn on the lower-back has been demonstrated to be valid and could be used for pragmatic gait analysis in prolonged uncontrolled free-living environments.

Association between routine and standardized blood pressure measurements and left ventricular hypertrophy among patients on hemodialysis.

Science.gov (United States)

Khangura, Jaspreet; Culleton, Bruce F; Manns, Braden J; Zhang, Jianguo; Barnieh, Lianne; Walsh, Michael; Klarenbach, Scott W; Tonelli, Marcello; Sarna, Magdalena; Hemmelgarn, Brenda R

2010-06-24

Left ventricular (LV) hypertrophy is common among patients on hemodialysis. While a relationship between blood pressure (BP) and LV hypertrophy has been established, it is unclear which BP measurement method is the strongest correlate of LV hypertrophy. We sought to determine agreement between various blood pressure measurement methods, as well as identify which method was the strongest correlate of LV hypertrophy among patients on hemodialysis. This was a post-hoc analysis of data from a randomized controlled trial. We evaluated the agreement between seven BP measurement methods: standardized measurement at baseline; single pre- and post-dialysis, as well as mean intra-dialytic measurement at baseline; and cumulative pre-, intra- and post-dialysis readings (an average of 12 monthly readings based on a single day per month). Agreement was assessed using Lin's concordance correlation coefficient (CCC) and the Bland Altman method. Association between BP measurement method and LV hypertrophy on baseline cardiac MRI was determined using receiver operating characteristic curves and area under the curve (AUC). Agreement between BP measurement methods in the 39 patients on hemodialysis varied considerably, from a CCC of 0.35 to 0.94, with overlapping 95% confidence intervals. Pre-dialysis measurements were the weakest predictors of LV hypertrophy while standardized, post- and inter-dialytic measurements had similar and strong (AUC 0.79 to 0.80) predictive power for LV hypertrophy. A single standardized BP has strong predictive power for LV hypertrophy and performs just as well as more resource intensive cumulative measurements, whereas pre-dialysis blood pressure measurements have the weakest predictive power for LV hypertrophy. Current guidelines, which recommend using pre-dialysis measurements, should be revisited to confirm these results.

Europe's Other Poverty Measures: Absolute Thresholds Underlying Social Assistance

Science.gov (United States)

Bavier, Richard

2009-01-01

The first thing many learn about international poverty measurement is that European nations apply a "relative" poverty threshold and that they also do a better job of reducing poverty. Unlike the European model, the "absolute" U.S. poverty threshold does not increase in real value when the nation's standard of living rises,…

Procedure for the standardized measure of the detective quantum efficiency in digital mammography

International Nuclear Information System (INIS)

Rodriguez Martin, G.; Garcia Castano, P.; Bermudez Luna, R.; Fernandez Bedoya, V.; Espana Lopez, M. L.; Miquelez Alonso, S.

2011-01-01

The objective of this work is to develop a simple guide for determining the DQE, according to the CEI, in those having mammography flat panel detectors, and highlight the main difficulties that may be in the process of the standardized measurement.

Activities of daily living measured by the Harvard Automated Phone Task track with cognitive decline over time in non-demented elderly

Science.gov (United States)

Marshall, Gad A.; Aghjayan, Sarah L.; Dekhtyar, Maria; Locascio, Joseph J.; Jethwani, Kamal; Amariglio, Rebecca E.; Johnson, Keith A.; Sperling, Reisa A.; Rentz, Dorene M.

2017-01-01

Background Impairment in activities of daily living is a major burden to both patients and caregivers. Mild impairment in instrumental activities of daily living is often seen at the stage of mild cognitive impairment. The field of Alzheimer’s disease is moving toward earlier diagnosis and intervention and more sensitive and ecologically valid assessments of instrumental or complex activities of daily living are needed. The Harvard Automated Phone Task, a novel performance-based activities of daily living instrument, has the potential to fill this gap. Objective To further validate the Harvard Automated Phone Task by assessing its longitudinal relationship to global cognition and specific cognitive domains in clinically normal elderly and individuals with mild cognitive impairment. Design In a longitudinal study, the Harvard Automated Phone Task was associated with cognitive measures using mixed effects models. The Harvard Automated Phone Task’s ability to discriminate across diagnostic groups at baseline was also assessed. Setting Academic clinical research center. Participants Two hundred and seven participants (45 young normal, 141 clinically normal elderly, and 21 mild cognitive impairment) were recruited from the community and the memory disorders clinics at Brigham and Women’s Hospital and Massachusetts General Hospital. Measurements Participants performed the three tasks of the Harvard Automated Phone Task, which consist of navigating an interactive voice response system to refill a prescription (APT-Script), select a new primary care physician (APT-PCP), and make a bank account transfer and payment (APT-Bank). The 3 tasks were scored based on time, errors, repetitions, and correct completion of the task. The primary outcome measure used for each of the tasks was total time adjusted for correct completion. Results The Harvard Automated Phone Task discriminated well between young normal, clinically normal elderly, and mild cognitive impairment

Cryogenic flow rate measurement with a laser Doppler velocimetry standard

Science.gov (United States)

Maury, R.; Strzelecki, A.; Auclercq, C.; Lehot, Y.; Loubat, S.; Chevalier, J.; Ben Rayana, F.

2018-03-01

A very promising alternative to the state-of-the-art static volume measurements for liquefied natural gas (LNG) custody transfer processes is the dynamic principle of flow metering. As the Designated Institute (DI) of the LNE (‘Laboratoire National de métrologie et d’Essais’, being the French National Metrology Institute) for high-pressure gas flow metering, Cesame-Exadebit is involved in various research and development programs. Within the framework of the first (2010-2013) and second (2014-2017) EURAMET Joint Research Project (JRP), named ‘Metrological support for LNG custody transfer and transport fuel applications’, Cesame-Exadebit explored a novel cryogenic flow metering technology using laser Doppler velocimetry (LDV) as an alternative to ultrasonic and Coriolis flow metering. Cesame-Exadebit is trying to develop this technique as a primary standard for cryogenic flow meters. Currently, cryogenic flow meters are calibrated at ambient temperatures with water. Results are then extrapolated to be in the Reynolds number range of real applications. The LDV standard offers a unique capability to perform online calibration of cryogenic flow meters in real conditions (temperature, pressure, piping and real flow disturbances). The primary reference has been tested on an industrial process in a LNG terminal during truck refuelling. The reference can calibrate Coriolis flow meters being used daily with all the real environmental constraints, and its utilisation is transparent for LNG terminal operators. The standard is traceable to Standard International units and the combined extended uncertainties have been determined and estimated to be lower than 0.6% (an ongoing improvement to reducing the correlation function uncertainty, which has a major impact in the uncertainty estimation).

Measuring rural welfare in colonial Africa

NARCIS (Netherlands)

Haas, De Michiel

2017-01-01

Recent scholarship on historical welfare development in Sub-Saharan Africa has uncovered long-term trends in standards of living. How the majority of rural dwellers fared, however, remains largely elusive. This study develops a new approach to reconstruct rural living standards in a historical

Measurement of in-plane elasticity of live cell layers using a pressure sensor embedded microfluidic device

Science.gov (United States)

Lin, Chien-Han; Wang, Chien-Kai; Chen, Yu-An; Peng, Chien-Chung; Liao, Wei-Hao; Tung, Yi-Chung

2016-11-01

In various physiological activities, cells experience stresses along their in-plane direction when facing substrate deformation. Capability of continuous monitoring elasticity of live cell layers during a period is highly desired to investigate cell property variation during various transformations under normal or disease states. This paper reports time-lapsed measurement of live cell layer in-plane elasticity using a pressure sensor embedded microfluidic device. The sensor converts pressure-induced deformation of a flexible membrane to electrical signals. When cells are cultured on top of the membrane, flexural rigidity of the composite membrane increases and further changes the output electrical signals. In the experiments, human embryonic lung fibroblast (MRC-5) cells are cultured and analyzed to estimate the in-plane elasticity. In addition, the cells are treated with a growth factor to simulate lung fibrosis to study the effects of cell transformation on the elasticity variation. For comparison, elasticity measurement on the cells by atomic force microscopy (AFM) is also performed. The experimental results confirm highly anisotropic configuration and material properties of cells. Furthermore, the in-plane elasticity can be monitored during the cell transformation after the growth factor stimulation. Consequently, the developed microfluidic device provides a powerful tool to study physical properties of cells for fundamental biophysics and biomedical researches.

The impact of local public services and geographical cost of living differences on poverty estimates

OpenAIRE

Aaberge, Rolf; Langørgen, Audun; Mogstad, Magne; Østensen, Marit

2008-01-01

Abstract: Despite a broad consensus on the need to account for the value of public services and geographical cost of living differences on the measurement of poverty, there is little reliable evidence on how these factors actually affect poverty estimates. Unlike the standard approach in studies of the distribution of public services, this paper employs a method for valuing sector-specific local public services that accounts for differences between municipalities in the costs and capacity ...

Measurement uncertainties for vacuum standards at Korea Research Institute of Standards and Science

International Nuclear Information System (INIS)

Hong, S. S.; Shin, Y. H.; Chung, K. H.

2006-01-01

The Korea Research Institute of Standards and Science has three major vacuum systems: an ultrasonic interferometer manometer (UIM) (Sec. II, Figs. 1 and 2) for low vacuum, a static expansion system (SES) (Sec. III, Figs. 3 and 4) for medium vacuum, and an orifice-type dynamic expansion system (DES) (Sec. IV, Figs. 5 and 6) for high and ultrahigh vacuum. For each system explicit measurement model equations with multiple variables are, respectively, given. According to ISO standards, all these system variable errors were used to calculate the expanded uncertainty (U). For each system the expanded uncertainties (k=1, confidence level=95%) and relative expanded uncertainty (expanded uncertainty/generated pressure) are summarized in Table IV and are estimated to be as follows. For UIM, at 2.5-300 Pa generated pressure, the expanded uncertainty is -2 Pa and the relative expanded uncertainty is -2 ; at 1-100 kPa generated pressure, the expanded uncertainty is -5 . For SES, at 3-100 Pa generated pressure, the expanded uncertainty is -1 Pa and the relative expanded uncertainty is -3 . For DES, at 4.6x10 -3 -1.3x10 -2 Pa generated pressure, the expanded uncertainty is -4 Pa and the relative expanded uncertainty is -3 ; at 3.0x10 -6 -9.0x10 -4 Pa generated pressure, the expanded uncertainty is -6 Pa and the relative expanded uncertainty is -2 . Within uncertainty limits our bilateral and key comparisons [CCM.P-K4 (10 Pa-1 kPa)] are extensive and in good agreement with those of other nations (Fig. 8 and Table V)

Seminar on standards, standardization, quality control and interlaboratory test programmes

Energy Technology Data Exchange (ETDEWEB)

de Bievre, P. [Central Bureau for Nuclear Measurements, Geel (Belgium)

1978-12-15

The author gives a resume on the proper use of standards and standardization of measurement procedures. Results of measurements obtained on the same instrument and on the same series of standards of different isotopic compositions are displayed.

A response of L-α-alanine and standard bone powder on 3.4 MeV/amu 59Co ion beams

International Nuclear Information System (INIS)

Stuglik, Z.; Sadlo, J.

1997-01-01

Dosimetric response of microcrystaline L-α-alanine and standard bovine bone powder on 3.4 MeV/amu 59 Co ions (LET ∼5500 eV/nm) was investigated. The long-lived paramagnetic centers created by ion beams were measured after 51 and 420 days. Relative sensitivity compared to gamma rays was estimated at 0.2 for L-α-alanine and 0.15 for standard bovine bone powder. (Author)

Quantitative measurements and modeling of cargo–motor interactions during fast transport in the living axon

International Nuclear Information System (INIS)

Seamster, Pamela E; Loewenberg, Michael; Pascal, Jennifer; Chauviere, Arnaud; Gonzales, Aaron; Cristini, Vittorio; Bearer, Elaine L

2012-01-01

The kinesins have long been known to drive microtubule-based transport of sub-cellular components, yet the mechanisms of their attachment to cargo remain a mystery. Several different cargo-receptors have been proposed based on their in vitro binding affinities to kinesin-1. Only two of these—phosphatidyl inositol, a negatively charged lipid, and the carboxyl terminus of the amyloid precursor protein (APP-C), a trans-membrane protein—have been reported to mediate motility in living systems. A major question is how these many different cargo, receptors and motors interact to produce the complex choreography of vesicular transport within living cells. Here we describe an experimental assay that identifies cargo–motor receptors by their ability to recruit active motors and drive transport of exogenous cargo towards the synapse in living axons. Cargo is engineered by derivatizing the surface of polystyrene fluorescent nanospheres (100 nm diameter) with charged residues or with synthetic peptides derived from candidate motor receptor proteins, all designed to display a terminal COOH group. After injection into the squid giant axon, particle movements are imaged by laser-scanning confocal time-lapse microscopy. In this report we compare the motility of negatively charged beads with APP-C beads in the presence of glycine-conjugated non-motile beads using new strategies to measure bead movements. The ensuing quantitative analysis of time-lapse digital sequences reveals detailed information about bead movements: instantaneous and maximum velocities, run lengths, pause frequencies and pause durations. These measurements provide parameters for a mathematical model that predicts the spatiotemporal evolution of distribution of the two different types of bead cargo in the axon. The results reveal that negatively charged beads differ from APP-C beads in velocity and dispersion, and predict that at long time points APP-C will achieve greater progress towards the presynaptic

77 FR 43542 - Cost Accounting Standards: Cost Accounting Standards 412 and 413-Cost Accounting Standards...

Science.gov (United States)

2012-07-25

... rule that revised Cost Accounting Standard (CAS) 412, ``Composition and Measurement of Pension Cost... Accounting Standards: Cost Accounting Standards 412 and 413--Cost Accounting Standards Pension Harmonization Rule AGENCY: Cost Accounting Standards Board, Office of Federal Procurement Policy, Office of...

Progress report on the IAEA programme on the standardization of reactor dosimetry measurements

International Nuclear Information System (INIS)

Ertek, C.; Cross, B.; Chernyshev, V.

1979-01-01

This report briefly summarizes present activities, current status and procedures associated with neutron spectrum unfolding by activation technique within the IAEA programme on standardization of reactor radiation measurements. Experimental efforts and calculations related to unfolding are critically analyzed including the most recent techniques, interlaboratory cooperation, direct influence of recently measured cross-sections on the unfolded neutron flux density spectrum, re-evaluation of some cross-sections, neutron self-shielding factors and scattering effects. (author)

An automated LS(β)- NaI(Tl)(γ) coincidence system as absolute standard for radioactivity measurements.

Science.gov (United States)

Joseph, Leena; Das, A P; Ravindra, Anuradha; Kulkarni, D B; Kulkarni, M S

2018-07-01

4πβ-γ coincidence method is a powerful and widely used method to determine the absolute activity concentration of radioactive solutions. A new automated liquid scintillator based coincidence system has been designed, developed, tested and established as absolute standard for radioactivity measurements. The automation is achieved using PLC (programmable logic controller) and SCADA (supervisory control and data acquisition). Radioactive solution of 60 Co was standardized to compare the performance of the automated system with proportional counter based absolute standard maintained in the laboratory. The activity concentrations determined using these two systems were in very good agreement; the new automated system can be used for absolute measurement of activity concentration of radioactive solutions. Copyright © 2018. Published by Elsevier Ltd.

Development of a system for real-time measurements of metabolite transport in plants using short-lived positron-emitting radiotracers

Science.gov (United States)

Kiser, Matthew R.

Over the past 200 years, the Earth's atmospheric carbon dioxide (CO 2) concentration has increased by more than 35%, and climate experts predict that CO2 levels may double by the end of this century. Understanding the mechanisms of resource management in plants is fundamental for predicting how plants will respond to the increase in atmospheric CO 2. Plant productivity sustains life on Earth and is a principal component of the planet's system that regulates atmospheric CO2 concentration. As such, one of the central goals of plant science is to understand the regulatory mechanisms of plant growth in a changing environment. Short-lived positron-emitting radiotracer techniques provide time-dependent data that are critical for developing models of metabolite transport and resource distribution in plants and their microenvironments. To better understand the effects of environmental changes on resource transport and allocation in plants, we have developed a system for real-time measurements of rnetabolite transport in plants using short-lived positron-emitting radio-tracers. This thesis project includes the design, construction, and demonstration of the capabilities of this system for performing real-time measurements of metabolite transport in plants. The short-lived radiotracer system described in this dissertation takes advantage of the combined capabilities and close proximity of two research facilities at. Duke University: the Triangle Universities Nuclear Laboratory (TUNL) and the Duke University Phytotron, which are separated by approximately 100 meters. The short-lived positron-emitting radioisotopes are generated using the 10-MV tandem Van de Graaff accelerator located in the main TUNL building, which provides the capability of producing short-lived positron-emitting isotopes such as carbon-11 (11C: 20 minute half-life), nitrogen-13 (13N; 10 minute half-life), fluorine-18 (18F; 110 minute half-life), and oxygen-15 (15O; 2 minute half-life). The radioisotopes may

Time-separated oscillatory fields for high-precision mass measurements on short-lived Al and Ca nuclides

CERN Document Server

George, Simon; Blank, B.; Blaum, K.; Breitenfeldt, M.; Hager, U.; Herfurth, F.; Herlert, A.; Kellerbauer, A.; Kluge, H.J.; Kretzschmar, M.; Lunney, D.; Savreux, R.; Schwarz, Andreas S.; Schweikhard, L.; Yazidjian, C.

2008-01-01

High-precision Penning trap mass measurements on the stable nuclide $^{27}$Al as well as on the short-lived radionuclides $^{26}$Al and $^{38,39}$Ca have been performed by use of radio-frequency excitation with time-separated oscillatory fields, i.e. Ramsey's method, as recently introduced for the excitation of the ion motion in a Penning trap, was applied. A comparison with the conventional method of a single continuous excitation demonstrates its advantage of up to ten times shorter measurements. The new mass values of $^{26,27}$Al clarify conflicting data in this specific mass region. In addition, the resulting mass values of the superallowed $\\beta$-emitter $^{38}$Ca as well as of the groundstate of the $\\beta$-emitter $^{26}$Al$^{m}$ confirm previous measurements and corresponding theoretical corrections of the ft-values.

Standard Measurement & Verification Plan for Lighting Equipment Retrofit or Replacement Projects

Energy Technology Data Exchange (ETDEWEB)

Richman, Eric E.

2009-11-04

This document provides a framework for a standard Measurement and Verification (M&V) plan for lighting projects. It was developed to support cost-effective retrofits (partial and complete replacements) of lighting systems and is intended to provide a foundation for an M&V plan for a lighting retrofit utilizing a "best practice" approach, and to provide guidance to site owners, contractors, and other involved organizations on what is essential for a robust M&V plan for lighting projects. This document provides examples of appropriate elements of an M&V plan, including the calculation of expected energy savings. The standard M&V plan, as provided, also allows for consistent comparison with other similar lighting projects. Although intended for lighting retrofit applications, M&V plans developed per this framework document may also be used for other non-lighting technology retrofits and new installations.

A Modern Framework for Measuring Poverty and Basic Economic Security

OpenAIRE

Shawn Fremstad

2010-01-01

This report details how the dominant framework for understanding and measuring poverty in the United States has become a conservative one. The current U.S. approach to measuring poverty views poverty only in terms of having an extremely low level of annual income, and utilizes poverty thresholds that are adjusted only for inflation rather than for changes in overall living standards. As a result, the official poverty measure has effectively defined deprivation down over the last four decades,...

Agrupamento de países segundo indicadores de padrão de vida Clustering of countries evaluated by standard of living indicators

Directory of Open Access Journals (Sweden)

Paulo Roberto Curi

1993-04-01

Full Text Available Foram estudados 125 países avaliados por um conjunto de 26 indicadores básicos, de saúde, econômicos e educacionais, usando-se três métodos estatísticos multivariados: Análise de Agrupamento, Análise de Componentes Principais e Análise de Variância Multivariada. As variáveis mais discriminatórias foram a expectativa de vida, as taxas de mortalidade infantil e de menores de cinco anos, as taxas de natalidade e de fertilidade e a taxa de matrícula no segundo grau para o sexo feminino. Os países foram ordenados de acordo com um "índice de padrão de vida" e separados em cinco grupos.The position of 125 countries is studied on the basis of a collection of 26 basic, health, economic and educational indicators. Multivariate statistical methods were used, including Cluster Analysis, Principal Component Analysis and Multivariate Analysis of Variance. The most discriminating variables were life expectancy the child mortality rate, the mortality rate of children of less than five years of age, the birth and fertility rates and the high-school female matriculation rate. The first principal component was interpreted as a measure of the living standard which made it possible to place the countries in order. Five clusters of countries are suggested.

Association between routine and standardized blood pressure measurements and left ventricular hypertrophy among patients on hemodialysis

Directory of Open Access Journals (Sweden)

Walsh Michael

2010-06-01

Full Text Available Abstract Background Left ventricular (LV hypertrophy is common among patients on hemodialysis. While a relationship between blood pressure (BP and LV hypertrophy has been established, it is unclear which BP measurement method is the strongest correlate of LV hypertrophy. We sought to determine agreement between various blood pressure measurement methods, as well as identify which method was the strongest correlate of LV hypertrophy among patients on hemodialysis. Methods This was a post-hoc analysis of data from a randomized controlled trial. We evaluated the agreement between seven BP measurement methods: standardized measurement at baseline; single pre- and post-dialysis, as well as mean intra-dialytic measurement at baseline; and cumulative pre-, intra- and post-dialysis readings (an average of 12 monthly readings based on a single day per month. Agreement was assessed using Lin's concordance correlation coefficient (CCC and the Bland Altman method. Association between BP measurement method and LV hypertrophy on baseline cardiac MRI was determined using receiver operating characteristic curves and area under the curve (AUC. Results Agreement between BP measurement methods in the 39 patients on hemodialysis varied considerably, from a CCC of 0.35 to 0.94, with overlapping 95% confidence intervals. Pre-dialysis measurements were the weakest predictors of LV hypertrophy while standardized, post- and inter-dialytic measurements had similar and strong (AUC 0.79 to 0.80 predictive power for LV hypertrophy. Conclusions A single standardized BP has strong predictive power for LV hypertrophy and performs just as well as more resource intensive cumulative measurements, whereas pre-dialysis blood pressure measurements have the weakest predictive power for LV hypertrophy. Current guidelines, which recommend using pre-dialysis measurements, should be revisited to confirm these results.

A method for estimating maternal and newborn lives saved from health-related investments funded by the UK government Department for International Development using the Lives Saved Tool

Directory of Open Access Journals (Sweden)

Ingrid K. Friberg

2017-11-01

Full Text Available Abstract Background In 2010, the UK Government Department for International Development (DFID committed through its 'Framework for results for reproductive, maternal and newborn health (RMNH' to save 50,000 maternal lives and 250,000 newborn lives by 2015. They also committed to monitoring the performance of this portfolio of investments to demonstrate transparency and accountability. Methods currently available to directly measure lives saved are cost-, time-, and labour-intensive. The gold standard for calculating the total number of lives saved would require measuring mortality with large scale population based surveys or annual vital events surveillance. Neither is currently available in all low- and middle-income countries. Estimating the independent effect of DFID support relative to all other effects on health would also be challenging. Methods The Lives Saved Tool (LiST is an evidence based software for modelling the effect of changes in health intervention coverage on reproductive, maternal, newborn and child mortality. A multi-country LiST-based analysis protocol was developed to retrospectively assess the total annual number of maternal and newborn lives saved from DFID aid programming in low- and middle-income countries. Results Annual LiST analyses using the latest program data from DFID country offices were conducted between 2013 and 2016, estimating the annual number of maternal and neonatal lives saved across 2010–2015. For each country, independent project results were aggregated into health intervention coverage estimates, with and in the absence of DFID funding. More than 80% of reported projects were suitable for inclusion in the analysis, with 151 projects analysed in the 2016 analysis. Between 2010 and 2014, it is estimated that DFID contributed to saving the lives of 15,000 women in pregnancy and childbirth with health programming and 88,000 with family planning programming. It is estimated that DFID health programming

A method for estimating maternal and newborn lives saved from health-related investments funded by the UK government Department for International Development using the Lives Saved Tool.

Science.gov (United States)

Friberg, Ingrid K; Baschieri, Angela; Abbotts, Jo

2017-11-07

In 2010, the UK Government Department for International Development (DFID) committed through its 'Framework for results for reproductive, maternal and newborn health (RMNH)' to save 50,000 maternal lives and 250,000 newborn lives by 2015. They also committed to monitoring the performance of this portfolio of investments to demonstrate transparency and accountability. Methods currently available to directly measure lives saved are cost-, time-, and labour-intensive. The gold standard for calculating the total number of lives saved would require measuring mortality with large scale population based surveys or annual vital events surveillance. Neither is currently available in all low- and middle-income countries. Estimating the independent effect of DFID support relative to all other effects on health would also be challenging. The Lives Saved Tool (LiST) is an evidence based software for modelling the effect of changes in health intervention coverage on reproductive, maternal, newborn and child mortality. A multi-country LiST-based analysis protocol was developed to retrospectively assess the total annual number of maternal and newborn lives saved from DFID aid programming in low- and middle-income countries. Annual LiST analyses using the latest program data from DFID country offices were conducted between 2013 and 2016, estimating the annual number of maternal and neonatal lives saved across 2010-2015. For each country, independent project results were aggregated into health intervention coverage estimates, with and in the absence of DFID funding. More than 80% of reported projects were suitable for inclusion in the analysis, with 151 projects analysed in the 2016 analysis. Between 2010 and 2014, it is estimated that DFID contributed to saving the lives of 15,000 women in pregnancy and childbirth with health programming and 88,000 with family planning programming. It is estimated that DFID health programming contributed to saving 187,000 newborn lives. It is

A High-Content Live-Cell Viability Assay and Its Validation on a Diverse 12K Compound Screen.

Science.gov (United States)

Chiaravalli, Jeanne; Glickman, J Fraser

2017-08-01

We have developed a new high-content cytotoxicity assay using live cells, called "ImageTOX." We used a high-throughput fluorescence microscope system, image segmentation software, and the combination of Hoechst 33342 and SYTO 17 to simultaneously score the relative size and the intensity of the nuclei, the nuclear membrane permeability, and the cell number in a 384-well microplate format. We then performed a screen of 12,668 diverse compounds and compared the results to a standard cytotoxicity assay. The ImageTOX assay identified similar sets of compounds to the standard cytotoxicity assay, while identifying more compounds having adverse effects on cell structure, earlier in treatment time. The ImageTOX assay uses inexpensive commercially available reagents and facilitates the use of live cells in toxicity screens. Furthermore, we show that we can measure the kinetic profile of compound toxicity in a high-content, high-throughput format, following the same set of cells over an extended period of time.

Self-Assembled Fluorescent Bovine Serum Albumin Nanoprobes for Ratiometric pH Measurement inside Living Cells.

Science.gov (United States)

Yang, Qiaoyu; Ye, Zhongju; Zhong, Meile; Chen, Bo; Chen, Jian; Zeng, Rongjin; Wei, Lin; Li, Hung-wing; Xiao, Lehui

2016-04-20

In this work, we demonstrated a new ratiometric method for the quantitative analysis of pH inside living cells. The structure of the nanosensor comprises a biofriendly fluorescent bovine serum albumin (BSA) matrix, acting as a pH probe, and pH-insensitive reference dye Alexa 594 enabling ratiometric quantitative pH measurement. The fluorescent BSA matrix was synthesized by cross-linking of the denatured BSA proteins in ethanol with glutaraldehyde. The size of the as-synthesized BSA nanoparticles can be readily manipulated from 30 to 90 nm, which exhibit decent fluorescence at the peak wavelength of 535 nm with a pH response range of 6-8. The potential of this pH sensor for intracellular pH monitoring was demonstrated inside living HeLa cells, whereby a significant change in fluorescence ratio was observed when the pH of the cell was switched from normal to acidic with anticancer drug treatment. The fast response of the nanosensor makes it a very powerful tool in monitoring the processes occurring within the cytosol.

Laboratory Evaluation of Air Flow Measurement Methods for Residential HVAC Returns for New Instrument Standards

Energy Technology Data Exchange (ETDEWEB)

Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Stratton, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2015-08-01

This project improved the accuracy of air flow measurements used in commissioning California heating and air conditioning systems in Title 24 (Building and Appliance Efficiency Standards), thereby improving system performance and efficiency of California residences. The research team at Lawrence Berkeley National Laboratory addressed the issue that typical tools used by contractors in the field to test air flows may not be accurate enough to measure return flows used in Title 24 applications. The team developed guidance on performance of current diagnostics as well as a draft test method for use in future evaluations. The study team prepared a draft test method through ASTM International to determine the uncertainty of air flow measurements at residential heating ventilation and air conditioning returns and other terminals. This test method, when finalized, can be used by the Energy Commission and other entities to specify required accuracy of measurement devices used to show compliance with standards.

Simulation study on the measurements of diffusion coefficients in solid materials by short-lived radiotracer beams

CERN Document Server

Jeong, S C; Kawakami, H

2003-01-01

We have examined, by a computer simulation, an on-line measurement of diffusion coefficients by using a short-lived alpha particle emitter, sup 8 Li (half life of 0.84s), as a radiotracer. The energy spectra of alpha particles emitted from diffusing sup 8 Li primarily implanted in the sample of LiAl ar simulated as a measure of the diffusion of sup 8 Li in the sample. As a possible time sequence for the measurement, a time cycle of 6s, i.e. the implantation of sup 8 Li for 1.5s and subsequent diffusion for 4.5s, is supposed. The sample is primarily set on a given temperature for the measurement. The time-dependent yields of alpha particles during the time cycle reveal the possibility to measure the diffusion coefficient with an accuracy of 10% if larger than 1 x 10 sup - sup 9 cm sup 2 /s, by the comparison with the experimental spectra measured at the temperature, i.e. at a certain diffusion coefficient. (author)

Influence of measurement uncertainty on classification of thermal environment in buildings according to European Standard EN 15251

DEFF Research Database (Denmark)

Kolarik, Jakub; Olesen, Bjarne W.

2015-01-01

European Standard EN 15 251 in its current version does not provide any guidance on how to handle uncertainty of long term measurements of indoor environmental parameters used for classification of buildings. The objective of the study was to analyse the uncertainty for field measurements...... measurements of operative temperature at two measuring points (south/south-west and north/northeast orientation). Results of the present study suggest that measurement uncertainty needs to be considered during assessment of thermal environment in existing buildings. When expanded standard uncertainty was taken...... into account in categorization of thermal environment according to EN 15251, the difference in prevalence of exceeded category limits were up to 17.3%, 8.3% and 2% of occupied hours for category I, II and III respectively....

Testing the Standard Model by precision measurement of the weak charges of quarks

Energy Technology Data Exchange (ETDEWEB)

Ross Young; Roger Carlini; Anthony Thomas; Julie Roche

2007-05-01

In a global analysis of the latest parity-violating electron scattering measurements on nuclear targets, we demonstrate a significant improvement in the experimental knowledge of the weak neutral-current lepton-quark interactions at low-energy. The precision of this new result, combined with earlier atomic parity-violation measurements, limits the magnitude of possible contributions from physics beyond the Standard Model - setting a model-independent, lower-bound on the scale of new physics at ~1 TeV.

International standards for fetal growth based on serial ultrasound measurements: the Fetal Growth Longitudinal Study of the INTERGROWTH-21st Project.

Science.gov (United States)

Papageorghiou, Aris T; Ohuma, Eric O; Altman, Douglas G; Todros, Tullia; Cheikh Ismail, Leila; Lambert, Ann; Jaffer, Yasmin A; Bertino, Enrico; Gravett, Michael G; Purwar, Manorama; Noble, J Alison; Pang, Ruyan; Victora, Cesar G; Barros, Fernando C; Carvalho, Maria; Salomon, Laurent J; Bhutta, Zulfiqar A; Kennedy, Stephen H; Villar, José

2014-09-06

In 2006, WHO produced international growth standards for infants and children up to age 5 years on the basis of recommendations from a WHO expert committee. Using the same methods and conceptual approach, the Fetal Growth Longitudinal Study (FGLS), part of the INTERGROWTH-21(st) Project, aimed to develop international growth and size standards for fetuses. The multicentre, population-based FGLS assessed fetal growth in geographically defined urban populations in eight countries, in which most of the health and nutritional needs of mothers were met and adequate antenatal care was provided. We used ultrasound to take fetal anthropometric measurements prospectively from 14 weeks and 0 days of gestation until birth in a cohort of women with adequate health and nutritional status who were at low risk of intrauterine growth restriction. All women had a reliable estimate of gestational age confirmed by ultrasound measurement of fetal crown-rump length in the first trimester. The five primary ultrasound measures of fetal growth--head circumference, biparietal diameter, occipitofrontal diameter, abdominal circumference, and femur length--were obtained every 5 weeks (within 1 week either side) from 14 weeks to 42 weeks of gestation. The best fitting curves for the five measures were selected using second-degree fractional polynomials and further modelled in a multilevel framework to account for the longitudinal design of the study. We screened 13,108 women commencing antenatal care at less than 14 weeks and 0 days of gestation, of whom 4607 (35%) were eligible. 4321 (94%) eligible women had pregnancies without major complications and delivered live singletons without congenital malformations (the analysis population). We documented very low maternal and perinatal mortality and morbidity, confirming that the participants were at low risk of adverse outcomes. For each of the five fetal growth measures, the mean differences between the observed and smoothed centiles for the 3rd

Development, validity, and reliability of the General Activities of Daily Living Scale: a multidimensional measure of activities of daily living for older people

Directory of Open Access Journals (Sweden)

Jonas J. de Paula

2014-05-01

Full Text Available Objective: To propose and evaluate the psychometric properties of a multidimensional measure of activities of daily living (ADLs based on the Katz and Lawton indices for Alzheimer's disease (AD and mild cognitive impairment (MCI. Methods: In this study, 85 patients with MCI and 93 with AD, stratified by age (≤ 74 years, > 74 years, completed the Mini Mental State Examination (MMSE and the Geriatric Depression Scale, and their caregivers completed scales for ADLs. Construct validity (factor analysis, reliability (internal consistency, and criterion-related validity (receiver operating characteristic analysis and logistic regression were assessed. Results: Three factors of ADL (self-care, domestic activities, and complex activities were identified and used for item reorganization and for the creation of a new inventory, called the General Activities of Daily Living Scale (GADL. The components showed good internal consistency (> 0.800 and moderate (younger participants or high (older participants accuracy for the distinction between MCI and AD. An additive effect was found between the GADL complex ADLs and global ADLs with the MMSE for the correct classification of younger patients. Conclusion: The GADL showed evidence of validity and reliability for the Brazilian elderly population. It may also play an important role in the differential diagnosis of MCI and AD.

A simple non-invasive method for measuring gross brain size in small live fish with semi-transparent heads

Directory of Open Access Journals (Sweden)

Joacim Näslund

2014-09-01

Full Text Available This paper describes a non-invasive method for estimating gross brain size in small fish with semi-transparent heads, using system camera equipment. Macro-photographs were taken from above on backlit free-swimming fish undergoing light anaesthesia. From the photographs, the width of the optic tectum was measured. This measure (TeO-measure correlates well with the width of the optic tectum as measured from out-dissected brains in both brown trout fry and zebrafish (Pearson r > 0.90. The TeO-measure also correlates well with overall brain wet weight in brown trout fry (r = 0.90, but less well for zebrafish (r = 0.79. A non-invasive measure makes it possible to quickly assess brain size from a large number of individuals, as well as repeatedly measuring brain size of live individuals allowing calculation of brain growth.

Measurements of activation cross sections for some long-lived nuclides important in fusion reactor technology

International Nuclear Information System (INIS)

Blinov, M.V.; Filatenkov, A.A.; Chuvaev, S.V.

1992-01-01

The Ag-109(n,2n)Ag-108m, Eu-151(n,2n)Eu-150 and Eu-153(n,2n)Eu-152 cross sections have been measured in the neutron energy interval of 13.7-14.9 MeV. The measurements were performed at the neutron generator NG-400 of the Radium Institute using (D-T) neutrons. At the same facility the upper limit has been obtained for the W-182(n,n'a)Hf-178m 2 cross section. Neutron capture of the Mo-98 that lead ultimately to the production of the long-lived Tc-99 has been studied at neutron energies 0.7-2.0 MeV. For these purposes, the Van de Graaf accelerator (EG-5) was employed that produced monochromatic neutrons in the (p-T) reaction. Both at EG-5 and NG-400 measurements, special efforts were made to minimize neutron spectrum impurities which unavoidably arise in irradiation environments. (author). 15 refs, 6 figs, 1 tab

The gait standard deviation, a single measure of kinematic variability.

Science.gov (United States)

Sangeux, Morgan; Passmore, Elyse; Graham, H Kerr; Tirosh, Oren

2016-05-01

Measurement of gait kinematic variability provides relevant clinical information in certain conditions affecting the neuromotor control of movement. In this article, we present a measure of overall gait kinematic variability, GaitSD, based on combination of waveforms' standard deviation. The waveform standard deviation is the common numerator in established indices of variability such as Kadaba's coefficient of multiple correlation or Winter's waveform coefficient of variation. Gait data were collected on typically developing children aged 6-17 years. Large number of strides was captured for each child, average 45 (SD: 11) for kinematics and 19 (SD: 5) for kinetics. We used a bootstrap procedure to determine the precision of GaitSD as a function of the number of strides processed. We compared the within-subject, stride-to-stride, variability with the, between-subject, variability of the normative pattern. Finally, we investigated the correlation between age and gait kinematic, kinetic and spatio-temporal variability. In typically developing children, the relative precision of GaitSD was 10% as soon as 6 strides were captured. As a comparison, spatio-temporal parameters required 30 strides to reach the same relative precision. The ratio stride-to-stride divided by normative pattern variability was smaller in kinematic variables (the smallest for pelvic tilt, 28%) than in kinetic and spatio-temporal variables (the largest for normalised stride length, 95%). GaitSD had a strong, negative correlation with age. We show that gait consistency may stabilise only at, or after, skeletal maturity. Copyright © 2016 Elsevier B.V. All rights reserved.

External and internal standards in the single-isotope derivative (radioenzymatic) measurement of plasma norepinephrine and epinephrine

International Nuclear Information System (INIS)

Shah, S.D.; Clutter, W.E.; Cryer, P.E.

1985-01-01

In plasma from normal humans (n = 9, 35 samples) and from patients with diabetes mellitus (n = 12, 24 samples) single-isotope derivative (radioenzymatic) plasma norepinephrine and epinephrine concentrations calculated from external standard curves constructed in a normal plasma pool were identical to those calculated from internal standards added to an aliquot of each plasma sample. In plasma from patients with end-stage renal failure receiving long-term dialysis (n = 34, 109 samples), competitive catechol-O-methyltransferase (COMT) inhibitory activity resulted in a systematic error when external standards in a normal plasma pool were used, as reported previously; values so calculated averaged 21% (+/- 12%, SD) lower than those calculated from internal standards. However, when external standard curves were constructed in plasma from a given patient with renal failure and used to calculate that patient's values, or in a renal failure plasma pool and used to calculate all renal failure values, norepinephrine and epinephrine concentrations were not significantly different from those calculated from internal standards. We conclude: (1) External standard curves constructed in plasma from a given patient with renal failure can be used to measure norepinephrine and epinephrine in plasma from that patient; further, external standards in a renal failure plasma pool can be used for assays in patients with end-stage renal failure receiving long-term dialysis. (2) Major COMT inhibitory activity is not present commonly if samples from patients with renal failure are excluded. Thus, it would appear that external standard curves constructed in normal plasma can be used to measure norepinephrine and epinephrine precisely in samples from persons who do not have renal failure

Standard practice for examination of welds using the alternating current field measurement technique

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice describes procedures to be followed during alternating current field measurement examination of welds for baseline and service-induced surface breaking discontinuities. 1.2 This practice is intended for use on welds in any metallic material. 1.3 This practice does not establish weld acceptance criteria. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system might not be exact equivalents; therefore, each system shall be used independently of the other. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard test method for measurement of soil resistivity using the two-electrode soil box method

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 This test method covers the equipment and a procedure for the measurement of soil resistivity, for samples removed from the ground, for use in the control of corrosion of buried structures. 1.2 Procedures allow for this test method to be used n the field or in the laboratory. 1.3 The test method procedures are for the resistivity measurement of soil samples in the saturated condition and in the as-received condition. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Soil resistivity values are reported in ohm-centimeter. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standardization of the method for measurement of plasma estrone by radioimmunoassay

International Nuclear Information System (INIS)

Vilanova, M.S.V.; Moreira, A.C.; Sala, M.M. de; Sa, M.F.S. de

1994-01-01

The present paper has as objective standardize a radioimmunoassay method for measurement of plasma estrone. Ethyl ether was used for plasma extraction. The sensitivity (Minimal detectable dose) was 3,7 pg/tube; the reproducibility (inter assay error) was 8,6%; the precision (intra assay error) was 4,1%. As a biological control the plasma estrone was ml) and in 24 patients with polycystic ovarian syndrome (median = 77,9 pg/ml). (author). 6 refs, 2 figs, 2 tabs

Developing a community-based flood resilience measurement standard

Science.gov (United States)

Keating, Adriana; Szoenyi, Michael; Chaplowe, Scott; McQuistan, Colin; Campbell, Karen

2015-04-01

Given the increased attention to resilience-strengthening in international humanitarian and development work, there has been concurrent interest in its measurement and the overall accountability of "resilience strengthening" initiatives. The literature is reaching beyond the polemic of defining resilience to its measurement. Similarly, donors are increasingly expecting organizations to go beyond claiming resilience programing to measuring and showing it. However, key questions must be asked, in particular "Resilience of whom and to what?". There is no one-size-fits-all solution. The approach to measuring resilience is dependent on the audience and the purpose of the measurement exercise. Deriving a resilience measurement system needs to be based on the question it seeks to answer and needs to be specific. This session highlights key lessons from the Zurich Flood Resilience Alliance approach to develop a flood resilience measurement standard to measure and assess the impact of community based flood resilience interventions, and to inform decision-making to enhance the effectiveness of these interventions. We draw on experience in methodology development to-date, together with lessons from application in two case study sites in Latin America. Attention will be given to the use of a consistent measurement methodology for community resilience to floods over time and place; challenges to measuring a complex and dynamic phenomenon such as community resilience; methodological implications of measuring community resilience versus impact on and contribution to this goal; and using measurement and tools such as cost-benefit analysis to prioritize and inform strategic decision making for resilience interventions. The measurement tool follows the five categories of the Sustainable Livelihoods Framework and the 4Rs of complex adaptive systems - robustness, rapidity, redundancy and resourcefulness -5C-4R. A recent white paper by the Zurich Flood Resilience Alliance traces the

Measurement of Short Living Baryon Magnetic Moment using Bent Crystals at SPS and LHC

CERN Document Server

Burmistrov, L; Ivanov, Yu; Massacrier, L; Robbe, P; Scandale, W; Stocchi, A

2016-01-01

The magnetic moments of baryons containing u,d and s quarks have been extensively studied and measured. The experimental results are all obtained by a well-assessed method that consists in measuring the polarisation vector of the incoming particles and the precession angle when the particle is travelling through an intense magnetic field. The polarization is evaluated by analysing the angular distribution of the decay products. No measurement of magnetic moments of charm or beauty baryons (and τ leptons) has been performed so far. The main reason is the lifetimes of charm/beauty baryons, too short to measure the magnetic moment by standard techniques. Historically, the prediction of baryon magnetic moments was one of the striking successes of the quark model. The importance of the measurement of heavy quark magnetic moment is to test the possibility that the charmed and/or beauty quarks has an anomalous magnetic moment, arising if those quarks are composite objects. Measurements on magnetic moments of heav...

Relating Standardized Visual Perception Measures to Simulator Visual System Performance

Science.gov (United States)

Kaiser, Mary K.; Sweet, Barbara T.

2013-01-01

Human vision is quantified through the use of standardized clinical vision measurements. These measurements typically include visual acuity (near and far), contrast sensitivity, color vision, stereopsis (a.k.a. stereo acuity), and visual field periphery. Simulator visual system performance is specified in terms such as brightness, contrast, color depth, color gamut, gamma, resolution, and field-of-view. How do these simulator performance characteristics relate to the perceptual experience of the pilot in the simulator? In this paper, visual acuity and contrast sensitivity will be related to simulator visual system resolution, contrast, and dynamic range; similarly, color vision will be related to color depth/color gamut. Finally, we will consider how some characteristics of human vision not typically included in current clinical assessments could be used to better inform simulator requirements (e.g., relating dynamic characteristics of human vision to update rate and other temporal display characteristics).

Measuring activity limitations in walking : Development of a hierarchical scale for patients with lower-extremity disorders who live at home

NARCIS (Netherlands)

Roorda, LD; Roebroeck, ME; van Tilburg, T; Molenaar, IW; Lankhorst, GJ; Bouter, LM

2005-01-01

Objective: To develop a hierarchical scale that measures activity limitations in walking in patients with lower-extremity disorders who live at home. Design: Cross-sectional study. Setting: Orthopedic workshops and outpatient clinics of secondary and tertiary care centers. Participants: Patients

How genetic data improve the interpretation of results of faecal glucocorticoid metabolite measurements in a free-living population.

Directory of Open Access Journals (Sweden)

Maik Rehnus

Full Text Available Measurement of glucocorticoid metabolites (GCM in faeces has become a widely used and effective tool for evaluating the amount of stress experienced by animals. However, the potential sampling bias resulting from an oversampling of individuals when collecting "anonymous" (unknown sex or individual faeces has rarely been investigated. We used non-invasive genetic sampling (NIGS to investigate potential interpretation errors of GCM measurements in a free-living population of mountain hares during the mating and post-reproductive periods. Genetic data improved the interpretation of results of faecal GCM measurements. In general GCM concentrations were influenced by season. However, genetic information revealed that it was sex-dependent. Within the mating period, females had higher GCM levels than males, but individual differences were more expressed in males. In the post-reproductive period, GCM concentrations were neither influenced by sex nor individual. We also identified potential pitfalls in the interpretation of anonymous faecal samples by individual differences in GCM concentrations and resampling rates. Our study showed that sex- and individual-dependent GCM levels led to a misinterpretation of GCM values when collecting "anonymous" faeces. To accurately evaluate the amount of stress experienced by free-living animals using faecal GCM measurements, we recommend documenting individuals and their sex of the sampled population. In stress-sensitive and elusive species, such documentation can be achieved by using NIGS and for diurnal animals with sexual and individual variation in appearance or marked individuals, it can be provided by a detailed field protocol.

Abstracts from the fourth annual meeting of the council on ionizing radiation measurements and standards (CIRMS)

International Nuclear Information System (INIS)

Anon.

1995-01-01

The Council on Ionizing Radiation Measurements and Standards held its fourth annual meeting at the National Institute of Standards and Technology, Gaithersburg, Maryland on November 28-30, 1995. The organization represents thousands of users of ionizing radiation and radioactive sources engaged in industrial radiation processing and sterilization, medical radiation diagnostics and therapy, nuclear power, and worker radiation protection programs. CIRMS provides a forum for discussing ionizing radiation issues; identifying, defining and prioritizing needed work; disseminating information on standards; and organizing workshops and meetings to advance ionizing radiation technology. Over 100 participants attended the meeting, which highlighted advanced techniques in radiation dosimetry and radioactivity measurements for the different ionizing radiation communities. Representatives attended from 28 corporations, 10 federal agencies, 8 national laboratories, 12 universities, and 1 state. Advanced techniques and future measurement needs were discussed in four sessions: (I) Medical Dosimetry, Radiology and Nuclear Medicine, (II) Occupational and Radiation Protection Dosimetry, (III) Measurement Techniques for Public and Environmental Radiation Protection, and (IV) Measurement Techniques for Radiation Effects on Materials. An additional session (Session V) was added to this annual meeting on the implementation of ISO 9000 for those CIRMS members involved in instrument and product manufacturing, and those providing radiation measurement services. Abstracts are also included from the poster session (Session VI) held on the final day of the meeting. The 4th Annual Meeting was organized by the Chairman of the Science and Technology Committee, Mr. Joseph C. McDonald of the Battelle Pacific Northwest Laboratory

A tracking algorithm for the reconstruction of the daughters of long-lived particles in LHCb

CERN Document Server

Dendek, Adam Mateusz

2018-01-01

A tracking algorithm for the reconstruction of the daughters of long-lived particles in LHCb 5 Jun 2018, 16:00 1h 30m Library, Centro San Domenico () LHC experiments Posters session Speaker Katharina Mueller (Universitaet Zuerich (CH)) Description The LHCb experiment at CERN operates a high precision and robust tracking system to reach its physics goals, including precise measurements of CP-violation phenomena in the heavy flavour quark sector and searches for New Physics beyond the Standard Model. The track reconstruction procedure is performed by a number of algorithms. One of these, PatLongLivedTracking, is optimised to reconstruct "downstream tracks", which are tracks originating from decays outside the LHCb vertex detector of long-lived particles, such as Ks or Λ0. After an overview of the LHCb tracking system, we provide a detailed description of the LHCb downstream track reconstruction algorithm. Its computational intelligence part is described in details, including the adaptation of the employed...

Advancing the sexual and reproductive health and human rights of women living with HIV: a review of UN, regional and national human rights norms and standards.

Science.gov (United States)

Khosla, Rajat; Van Belle, Nuna; Temmerman, Marleen

2015-01-01

The right to sexual and reproductive health (SRH) is an essential part of the right to health and is dependent upon substantive equality, including freedom from multiple and intersecting forms of discrimination that result in exclusion in both law and practice. Nonetheless, general and specific SRH needs of women living with HIV are often not adequately addressed. For example, services that women living with HIV need may not be available or may have multiple barriers, in particular stigma and discrimination. This study was conducted to review United Nations Human Rights Council, Treaty Monitoring Bodies and Special Rapporteur reports and regional and national mechanisms regarding SRH issues of women living with HIV. The objective is to assess areas of progress, as well as gaps, in relation to health and human rights considerations in the work of these normative bodies on health and human rights. The review was done using keywords of international, regional and national jurisprudence on findings covering the 2000 to 2014 period for documents in English; searches for the Inter-American Commission on Human Rights and national judgments were also conducted in Spanish. Jurisprudence of UN Treaty Monitoring Bodies, regional mechanisms and national bodies was considered in this regard. In total, 236 findings were identified using the search strategy, and of these 129 were selected for review based on the inclusion criteria. The results highlight that while jurisprudence from international, regional and national bodies reflects consideration of some health and human rights issues related to women living with HIV and SRH, the approach of these bodies has been largely ad hoc and lacks a systematic integration of human rights concerns of women living with HIV in relation to SRH. Most findings relate to non-discrimination, accessibility, informed decision-making and accountability. There are critical gaps on normative standards regarding the human rights of women living with

Development and Standardization of Inventory for Measuring Students' Integration into University Academic Culture

Science.gov (United States)

Esomonu, Nkechi Patricia-Mary; Okeaba, James Uzoma

2016-01-01

The study developed and standardized an Inventory for measuring Students' Integration into University Academic Culture named Inventory for Students' Integration into University Academic Culture (ISIUAC). The increase in dropout rates, substance use, cultism and other deviant behaviours in Nigerian universities makes it necessary for one to ask the…

Conceptual Foundations of Improving the Living Standards of Territorial Community Based on the Introduction and Development of New Forms of Innovation and Investment Cooperation Between Regional Authorities and the Local Community

Directory of Open Access Journals (Sweden)

Popadynets, V.I.

2015-03-01

Full Text Available The main provisions have been formulated for elaboration, implementation and development of the regional target programs based on new methodological and financial resources and realization of sales of the most significant products of regional companies and organizations for the sustainable improvement of the local community living standards.

Multicenter Evaluation of Cystatin C Measurement after Assay Standardization.

Science.gov (United States)

Bargnoux, Anne-Sophie; Piéroni, Laurence; Cristol, Jean-Paul; Kuster, Nils; Delanaye, Pierre; Carlier, Marie-Christine; Fellahi, Soraya; Boutten, Anne; Lombard, Christine; González-Antuña, Ana; Delatour, Vincent; Cavalier, Etienne

2017-04-01

Since 2010, a certified reference material ERM-DA471/IFCC has been available for cystatin C (CysC). This study aimed to assess the sources of uncertainty in results for clinical samples measured using standardized assays. This evaluation was performed in 2015 and involved 7 clinical laboratories located in France and Belgium. CysC was measured in a panel of 4 serum pools using 8 automated assays and a candidate isotope dilution mass spectrometry reference measurement procedure. Sources of uncertainty (imprecision and bias) were evaluated to calculate the relative expanded combined uncertainty for each CysC assay. Uncertainty was judged against the performance specifications derived from the biological variation model. Only Siemens reagents on the Siemens systems and, to a lesser extent, DiaSys reagents on the Cobas system, provided results that met the minimum performance criterion calculated according to the intraindividual and interindividual biological variations. Although the imprecision was acceptable for almost all assays, an increase in the bias with concentration was observed for Gentian reagents, and unacceptably high biases were observed for Abbott and Roche reagents on their own systems. This comprehensive picture of the market situation since the release of ERM-DA471/IFCC shows that bias remains the major component of the combined uncertainty because of possible problems associated with the implementation of traceability. Although some manufacturers have clearly improved their calibration protocols relative to ERM-DA471, most of them failed to meet the criteria for acceptable CysC measurements. © 2016 American Association for Clinical Chemistry.

The Australian Commonwealth standard of measurement for absorbed radiation dose. Part 1

International Nuclear Information System (INIS)

Sherlock, S.L.

1989-08-01

As an agent for the Commonwealth Scientific and Industrial Research Organisation, the Australian Nuclear Science and Technology Organisation is responsible for maintenance of the Australian Commonwealth standard of absorbed dose. This standard of measurement has application in radiation therapy dosimetry, which is required for the treatment of cancer patients. This report is the first in a series of reports documenting the absorbed dose standard for photon beams in the range from 1 to 25 MeV. The Urquhart graphite micro-calorimeters, which is used for the determination of absorbed dose under high energy photon beams, has been now placed under computer control. Accordingly, a complete upgrade of the calorimeter systems was performed to allow operation in the hospital. In this report, control and monitoring techniques have been described, with an assessment of the performance achieved being given for 6 and 18 MeV bremsstrahlung beams. Random errors have been reduced to near negligible proportions, while systematic errors have been minimized by achieving true quasi-adiabatic operation. 16 refs., 9 tabs., 11 figs

Living standard is related to microregional differences in stroke characteristics in Central Europe: the Budapest Districts 8-12 Project.

Science.gov (United States)

Folyovich, András; Vastagh, Ildikó; Kéri, Anna; Majoros, Angéla; Kovács, Koppány Levente; Ajtay, András; Laki, Zsuzsanna; Gunda, Bence; Erdei, Katalin; Lenti, Laura; Dános, Zsófia; Bereczki, Dániel

2015-05-01

To test whether str oke features relate to living standard within one city by comparing 2 districts. District-8 (D-8) ranks the last, whereas District-12 (D-12) is the second regarding personal monthly income of the 23 districts of Budapest, Hungary. Stroke cases hospitalized in 2007 were identified by the database of the National Health Insurance Fund and postal codes for living address. Case certification was performed by personal visits to the general practitioners. Demographic data, risk factors and survival status in 2010 were analyzed using the anonymized database. Three-year case fatality was 36.6 % in D-8 and 31.5 % in D-12 (p = 0.24). Of the fatal cases, men were more than 12 years younger in D-8 than in D-12 (69.2 ± 13.3 vs. 82.4 ± 9.2 years, p < 0.001). Men died younger than women in D-8 (69.2 ± 13.3 vs. 75.2 ± 12.4; p = 0.036), but not in D-12 (82.4 ± 9.2 vs. 81.9 ± 7.3, p = 0.8). Non-treated hypertension, alcohol dependence, and smoking were significantly more prevalent in the poor district (p < 0.01 for all). In national stroke programs of former Eastern Block countries, primary prevention should focus especially on male populations of less wealthy regions.

Impact of a product-specific reference standard for the measurement of a PEGylated rFVIII activity: the Swiss Multicentre Field Study.

Science.gov (United States)

Bulla, O; Poncet, A; Alberio, L; Asmis, L M; Gähler, A; Graf, L; Nagler, M; Studt, J-D; Tsakiris, D A; Fontana, P

2017-07-01

Measuring factor VIII (FVIII) activity can be challenging when it has been modified, such as when FVIII is pegylated to increase its circulating half-life. Use of a product-specific reference standard may help avoid this issue. Evaluate the impact of using a product-specific reference standard for measuring the FVIII activity of BAX 855 - a pegylated FVIII - in eight of Switzerland's main laboratories. Factor VIII-deficient plasma, spiked with five different concentrations of BAX 855, plus a control FVIII sample, was sent to the participating laboratories. They measured FVIII activity by using either with a one-stage (OSA) or the chromogenic assay (CA) against their local or a product-specific reference standard. When using a local reference standard, there was an overestimation of BAX 855 activity compared to the target concentrations, both with the OSA and CA. The use of a product-specific reference standard reduced this effect: mean recovery ranged from 127.7% to 213.5% using the OSA with local reference standards, compared to 110% to 183.8% with a product-specific reference standard, and from 146.3% to 182.4% using the CA with local reference standards compared to 72.7% to 103.7% with a product-specific reference standard. In this in vitro study, the type of reference standard had a major impact on the measurement of BAX 855 activity. Evaluation was more accurate and precise when using a product-specific reference standard. © 2017 John Wiley & Sons Ltd.

Measuring acute changes in adrenergic nerve activity of the heart in the living animal

International Nuclear Information System (INIS)

Sisson, J.C.; Bolgos, G.; Johnson, J.

1991-01-01

Changes in the function of the adrenergic neurons of the heart may be important indicators of the adaptations of an animal to physiologic stress and disease. Rates of loss of norepinephrine (NE) from the heart were considered to be proportional to NE secretion and to adrenergic function. In rat hearts, yohimbine induced almost identical increases in rates of loss of 3 H-NE and of 125 I-metaiodobenzylguanidine (MIBG), a functional analog of NE. Clonidine induced decreases in rates of loss of 3 H-NE that were also mimicked by those of 125 I-MIBG. In the dog heart, pharmacologically-induced increases and decreases in rates of loss of 123 I-MIBG could be measured externally; these values were similar to those obtained for 125 I-MIBG in the rat heart. Thus acute changes in the adrenergic neuron activity can be measured in the living heart. The method is applicable to man in determining the capacity of the adrenergic system to respond to provocative challenges

Development and pilot of an internationally standardized measure of cardiovascular risk management in European primary care

Directory of Open Access Journals (Sweden)

Szecsenyi Joachim

2011-04-01

Full Text Available Abstract Background Primary care can play an important role in providing cardiovascular risk management in patients with established Cardiovascular Diseases (CVD, patients with a known high risk of developing CVD, and potentially for individuals with a low risk of developing CVD, but who have unhealthy lifestyles. To describe and compare cardiovascular risk management, internationally valid quality indicators and standardized measures are needed. As part of a large project in 9 European countries (EPA-Cardio, we have developed and tested a set of standardized measures, linked to previously developed quality indicators. Methods A structured stepwise procedure was followed to develop measures. First, the research team allocated 106 validated quality indicators to one of the three target populations (established CVD, at high risk, at low risk and to different data-collection methods (data abstraction from the medical records, a patient survey, an interview with lead practice GP/a practice survey. Secondly, we selected a number of other validated measures to enrich the assessment. A pilot study was performed to test the feasibility. Finally, we revised the measures based on the findings. Results The EPA-Cardio measures consisted of abstraction forms from the medical-records data of established Coronary Heart Disease (CHD-patients - and high-risk groups, a patient questionnaire for each of the 3 groups, an interview questionnaire for the lead GP and a questionnaire for practice teams. The measures were feasible and accepted by general practices from different countries. Conclusions An internationally standardized measure of cardiovascular risk management, linked to validated quality indicators and tested for feasibility in general practice, is now available. Careful development and pilot testing of the measures are crucial in international studies of quality of healthcare.

Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review.

Science.gov (United States)

Fujiyoshi, So; Tanaka, Daisuke; Maruyama, Fumito

2017-01-01

Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%). It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration) with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i) outdoor environments, and (ii) the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne bacteria using

Transmission of Airborne Bacteria across Built Environments and Its Measurement Standards: A Review

Directory of Open Access Journals (Sweden)

So Fujiyoshi

2017-11-01

Full Text Available Human health is influenced by various factors including microorganisms present in built environments where people spend most of their lives (approximately 90%. It is therefore necessary to monitor and control indoor airborne microbes for occupational safety and public health. Most studies concerning airborne microorganisms have focused on fungi, with scant data available concerning bacteria. The present review considers papers published from 2010 to 2017 approximately and factors affecting properties of indoor airborne bacteria (communities and concentration with respect to temporal perspective and to multiscale interaction viewpoint. From a temporal perspective, bacterial concentrations in built environments change depending on numbers of human occupancy, while properties of bacterial communities tend to remain stable. Similarly, the bacteria found in social and community spaces such as offices, classrooms and hospitals are mainly associated with human occupancy. Other major sources of indoor airborne bacteria are (i outdoor environments, and (ii the building materials themselves. Indoor bacterial communities and concentrations are varied with varying interferences by outdoor environment. Airborne bacteria from the outdoor environment enter an indoor space through open doors and windows, while indoor bacteria are simultaneously released to the outer environment. Outdoor bacterial communities and their concentrations are also affected by geographical factors such as types of land use and their spatial distribution. The bacteria found in built environments therefore originate from any of the natural and man-made surroundings around humans. Therefore, to better understand the factors influencing bacterial concentrations and communities in built environments, we should study all the environments that humans contact as a single ecosystem. In this review, we propose the establishment of a standard procedure for assessing properties of indoor airborne

ATLAS results on searches for long-lived particles

CERN Document Server

Otono, Hidetoshi; The ATLAS collaboration

2018-01-01

Various new physics beyond standard model predict that long-lived particles would be produced at the LHC, which leave unconventional signatures in the ATLAS detector. In this talk, many searches done by the ATLAS collaboration will be reported.

Can live music therapy reduce distress and pain in children with burns after wound care procedures? A randomized controlled trial.

Science.gov (United States)

van der Heijden, Marianne J E; Jeekel, Johannes; Rode, Heinz; Cox, Sharon; van Rosmalen, Joost; Hunink, Myriam G M; van Dijk, Monique

2018-06-01

Burn wound care procedures are very painful and lead to distress. Live music therapy has shown beneficial effects on distress and pain in specific pediatric patient populations. In this study we measured whether live music therapy has beneficial effects in terms of less distress and pain in children with burns after wound care procedures. This randomized assessor-blinded controlled trial (RCT) took place at the burns unit of the Red Cross War Memorial Children's Hospital, Cape Town, South Africa. It included newly admitted inpatients between the ages of 0 and 13 years undergoing their first or second wound care procedures. Excluded were children with a hearing impairment or low level of consciousness. The intervention group received one live music therapy session directly after wound care in addition to standard care. The control group received standard care only. The primary outcome was distress measured with the Observational Scale of Behavioral Distress-revised (OSBD-r). The secondary outcome was pain measured with the COMFORT-behavioral scale (COMFORT-B). In addition, in children older than 5 years self-reported distress with the validated Wong-Baker scale (FACES) and pain with the Faces Pain Scale-Revised (FPS-R) were measured. Patients in both groups were videotaped for three minutes before wound care; during the music therapy or the control condition; and for two minutes thereafter. Two researchers, blinded to the study condition, independently scored the OSBD-r and the COMFORT-B from the video footage before and after music therapy. We included 135 patients, median age 22.6 months (IQR 15.4-40.7 months). Change scores did not significantly differ between the intervention and the control groups for either distress (p=0.53; d=0.11; 95% CI -0.23 to 0.45) or pain (p=0.99; d=0.04; 95% CI -0.30 to 0.38). Self-reported distress in a small group of children (n=18) older than 5 years indicated a significant reduction in distress after live music therapy (p=0

Physics at the LHC - From Standard Model measurements to Searches for New Physics

Energy Technology Data Exchange (ETDEWEB)

Jakobs, Karl [Freiburg University (Germany)

2014-07-01

The successful operation of the Large Hadron Collider (LHC) during the past two years allowed to explore particle interaction in a new energy regime. Measurements of important Standard Model processes like the production of high-p{sub T} jets, W and Z bosons and top and b-quarks were performed by the LHC experiments. In addition, the high collision energy allowed to search for new particles in so far unexplored mass regions. Important constraints on the existence of new particles predicted in many models of physics beyond the Standard Model could be established. With integrated luminosities reaching values around 5 fb{sup −1} in 2011, the experiments reached as well sensitivity to probe the existence of the Standard Model Higgs boson over a large mass range. In the present report the major physics results obtained by the two general-purpose experiments ATLAS and CMS are summarized.

The ELPAT living organ donor Psychosocial Assessment Tool (EPAT): from 'what' to 'how' of psychosocial screening - a pilot study.

Science.gov (United States)

Massey, Emma K; Timmerman, Lotte; Ismail, Sohal Y; Duerinckx, Nathalie; Lopes, Alice; Maple, Hannah; Mega, Inês; Papachristou, Christina; Dobbels, Fabienne

2018-01-01

Thorough psychosocial screening of donor candidates is required in order to minimize potential negative consequences and to strive for optimal safety within living donation programmes. We aimed to develop an evidence-based tool to standardize the psychosocial screening process. Key concepts of psychosocial screening were used to structure our tool: motivation and decision-making, personal resources, psychopathology, social resources, ethical and legal factors and information and risk processing. We (i) discussed how each item per concept could be measured, (ii) reviewed and rated available validated tools, (iii) where necessary developed new items, (iv) assessed content validity and (v) pilot-tested the new items. The resulting ELPAT living organ donor Psychosocial Assessment Tool (EPAT) consists of a selection of validated questionnaires (28 items in total), a semi-structured interview (43 questions) and a Red Flag Checklist. We outline optimal procedures and conditions for implementing this tool. The EPAT and user manual are available from the authors. Use of this tool will standardize the psychosocial screening procedure ensuring that no psychosocial issues are overlooked and ensure that comparable selection criteria are used and facilitate generation of comparable psychosocial data on living donor candidates. © 2017 Steunstichting ESOT.