WorldWideScience

Sample records for lint cleaner named

  1. Removing seed coat fragments with a lint cleaner grid bar air knife

    Science.gov (United States)

    Seed coat fragments (SCF) in ginned lint cause spinning problems at the textile mill and undesirable defects in finished goods. Work continued on developing an air knife that may help remove SCF from ginned lint. The air knife is mounted on the 1st lint cleaner grid bar of a saw-type lint cleaner,...

  2. Effects of Friction Reduction on Fiber Damage in a Saw-Type Lint Cleaner

    Science.gov (United States)

    U.S. cotton is at a competitive disadvantage from a fiber-quality standpoint, because lint cleaning is required for mechanically harvested cotton, and lint cleaning causes fiber damage. Lint-cleaning research has focused mainly on modifying saw-type lint cleaners, but the work reported here focuses...

  3. Development of an air knife to remove seed coat fragments during lint cleaning

    Science.gov (United States)

    An air knife is a tool commonly used to blow off debris in a manufacturing line. The knife may also be used to break the attachment force between a lint cleaner saw and a seed coat fragment (SCF) with attached fiber, and remove them. Work continued on evaluating an auxiliary air knife mounted on t...

  4. The path of code linting

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Join the path of code linting and discover how it can help you reach higher levels of programming enlightenment. Today we will cover how to embrace code linters to offload cognitive strain on preserving style standards in your code base as well as avoiding error-prone constructs. Additionally, I will show you the journey ahead for integrating several code linters in the programming tools your already use with very little effort.

  5. Cutting cleaner

    International Nuclear Information System (INIS)

    Elsen, R.P.H. van; Smits, M.

    1991-01-01

    This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

  6. Swimming pool cleaner poisoning

    Science.gov (United States)

    Swimming pool cleaner poisoning occurs when someone swallows this type of cleaner, touches it, or breathes in ... The harmful substances in swimming pool cleaner are: Bromine ... copper Chlorine Soda ash Sodium bicarbonate Various mild acids

  7. 7 CFR 319.8-8 - Lint, linters, and waste.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Lint, linters, and waste. 319.8-8 Section 319.8-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION... Britain and Northern Ireland (United Kingdom), Iceland, Liechtenstein, Luxembourg, Netherlands, Norway...

  8. Euroopa parimaks filmiks nimetati "Valge lint" / Heili Sibrits

    Index Scriptorium Estoniae

    Sibrits, Heili, 1977-

    2009-01-01

    Euroopa Filmiakadeemia auhindadest: parima filmiauhinna sai Saksamaal Bochumis toimunud tseremoonial Michael Haneke "Valge lint", mille eest Haneke sai ka parima režissööri ja stsenaristi auhinna. Parimaks meesnäitlejaks pärjati Tahar Rahim ("Un Prophete"), parimaks naisnäitlejaks Kate Winslet ("The Reader"). Ka teistest võitjatest

  9. Metal cleaner poisoning

    Science.gov (United States)

    ... do so by poison control or a health care provider. If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes. If the person swallowed the metal cleaner, give them water or milk right away, unless a provider tells you not ...

  10. Euroopa parimaks filmiks sai Michael Haneke "Valge lint" / Andres Laasik

    Index Scriptorium Estoniae

    Laasik, Andres, 1960-2016

    2009-01-01

    Euroopa Filmiakadeemia auhindadest: parima filmiauhinna sai Saksamaal Bochumis toimunud tseremoonial Michael Haneke "Valge lint", mille eest Haneke sai ka parima režissööri ja stsenaristi auhinna. Parimaks meesnäitlejaks pärjati Tahar Rahim ("Un Prophete"), parimaks naisnäitlejaks Kate Winslet ("The Reader"), publikupreemia sai Danny Boyle'i "Rentslimiljonär. Ka teistest võitjatest

  11. Institutionalising cleaner production in China: the cleaner production promotion law

    NARCIS (Netherlands)

    Mol, A.P.J.; Liu Yi,

    2005-01-01

    During the 1990s, cleaner production was introduced in China, in the beginning especially via development aid projects. From 1992 to 1997 the focus was strongly on the introduction of cleaner production methodology, the training of personnel and the implementation of demonstration projects at the

  12. Metal-Detergent/Cleaner Compatibility

    National Research Council Canada - National Science Library

    Hindin, Barry

    1994-01-01

    ...) such as CFC-1 13 or 1,1,1 Trichioroethane (TCA) in their cleaning and degreasing procedures. During the last few years, AGMC has been evaluating alternative, environmentally acceptable chemicals to replace their ODC cleaners...

  13. Inventory on cleaner production education and training

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pöyry, Sirkka; Huisingh, Donald

    Analysis and presentation of the data from an international inventory on cleaner production education and training......Analysis and presentation of the data from an international inventory on cleaner production education and training...

  14. Standard test method for water in lint cotton by oven evaporation combined with volumetric Karl Fischer Titration

    Science.gov (United States)

    The referenced test method for total water content and water regain in lint cotton was developed by USDA scientists in New Orleans at the request of the cotton industry. The method covers the determination of the total water (free and bound) in raw and lint cotton at moisture equilibrium from con...

  15. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-mei; Wang, Xin-jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  16. Inhomogeneous electric field air cleaner

    International Nuclear Information System (INIS)

    Schuster, B.G.

    1976-01-01

    For applications requiring the filtration of air contaminated with enriched uranium, plutonium or other transuranium compounds, it appears desirable to collect the material in a fashion more amenable to recovery than is now practical when material is collected on HEPA filters. In some instances, it may also be desirable to use an air cleaner of this type to substantially reduce the loading to which HEPA filters are subjected. A theoretical evaluation of such an air cleaner considers the interaction between an electrically neutral particle, dielectric or conducting, with an inhomogeneous electric field. An expression is derived for the force exerted on a particle in an electrode configuration of two concentric cylinders. Equations of motion are obtained for a particle suspended in a laminar flow of air passing through this geometry. An electrical quadrupole geometry is also examined and shown to be inferior to the cylindrical one. The results of two separate configurations of the single cell prototypes of the proposed air cleaner are described. These tests were designed to evaluate collection efficiencies using mono-disperse polystyrene latex and polydisperse NaCl aerosols. The advantages and problems of such systems in terms of a large scale air cleaning facility will be discussed

  17. Probing bias reduction to improve comparability of lint cotton water and moisture contents at moisture equilibrium

    Science.gov (United States)

    The Karl Fischer Titration (KFT) reference method is specific for water in lint cotton and was designed for samples conditioned to moisture equilibrium, thus limiting its biases. There is a standard method for moisture content – weight loss – by oven drying (OD), just not for equilibrium moisture c...

  18. Fatal accidental inhalation of brake cleaner aerosols.

    Science.gov (United States)

    Veit, F; Martz, W; Birngruber, C G; Dettmeyer, R B

    2018-04-23

    Brake cleaner liquid is commonly used for cleaning of engines and motor parts. The commercially available products usually contain mainly volatile organic compounds. As a consequence brake cleaner evaporates fast and almost completely from the cleaned surface. This case report presents a fatal accidental inhalation of brake cleaner liquid aerosols due to the attempted cleaning of a boat engine. A 16year old boy was found lifeless in the engine compartment of a boat engine. In close proximity to the body, the police found cleanings wipes soaked with brake cleaner as well as a pump spray bottle filled with brake cleaner. Essentially the autopsy revealed a cerebral oedema with encephalomalacia, no coagulated blood as well as increased blood and tissue fluid content of the lung. Toxicological analysis revealed brake cleaner fluid in the lung, gastric content and heart blood. Copyright © 2018 Elsevier B.V. All rights reserved.

  19. Cleaner Production in the mining

    International Nuclear Information System (INIS)

    Pinto Martinez, Elias

    2004-01-01

    The control politics of the environmental contamination have substantially changed from the 80, toward new preventive tendencies that make the question. That we make with the residuals? What can we make for not generating residuals? On this position, the topic of clean production, it really indicates environmentally a production cleaner, to generate a more respectful final product with the environment, as a result of a process that incorporates in each one of the phases of the life cycle of products the best environmental practices. The national politics of cleaner production was approved in August of 1997 by the environmental national advice, it was formulated like an answer to the solution of the environmental problem of the productive sectors that looks for fundamentally to prevent the contamination in its origin, instead of treating her once generated, with significant results for the construction of the real possibilities of sustainability and competitiveness. Their implementation requires of the government like of the productive sectors, fundamentally, because the environmental problems have become very complex for its control, only through direct regulation, and because to reach the sustainable development of the productive activities implies to face the new challenges of the national and international competitiveness, considering that the environmental administration is a source of opportunities and not an obstacle. In the practice the application of the concept of cleaner production, so much in the current systems of production like in the products and services, it doesn't mean a substitution in strict sense for other different, but improving them continually, under the expert that the new technologies will be cleaner. Of here that production cleans it profiles as the goal that will be reached with the new investments, as long as the systematic search of the continuous improvement, corresponds to the concept of cleaner production that obeys a dynamic and

  20. Drivers for Cleaner Production in Malaysian Industry

    DEFF Research Database (Denmark)

    Wangel, Arne

    2003-01-01

    This working paper tries to piece together information on regulatory initiatives promoting cleaner production (CP) in Malaysian industry, as well as points of discussion on environmental performance in the sector. It draws upon initial data collection by the team of the research project ‘A Study...... on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production’, which is coordinated by Institute of Environmental and Resource Management, Universiti Teknologi Malaysia; the objective of this study...... is ‘to formulate, establish and develop a comprehensive "National Cleaner Production Promotion Program" for Malaysia’....

  1. Reconstructing the image of the cleaner

    NARCIS (Netherlands)

    Jorcho van Vlijmen; Toine van den Hoogen

    2013-01-01

    Purpose: The article shows the relevance of an insider’s perspective on workers in the cleaning industry (cleaners). It explains how the ways in which cleaners create meaning in their work can be explored. These findings help to create added value for FM. Theory: Organisational theory describes a

  2. 7 CFR 2902.49 - Industrial cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Industrial cleaners. 2902.49 Section 2902.49... Items § 2902.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as..., floors, walls, and other production-related work areas. The cleaning products within this item are...

  3. Differential cross section measurement for the 6Li(n,t)4He Reaction

    International Nuclear Information System (INIS)

    Zhang Guohui; Tang Guoyou; Chen Jinxiang; Shi Zhaomin

    2002-01-01

    The differential cross sections and integrated cross sections of the 6 Li(n,t) 4 He reaction were measured at 1.85 and 2.67 MeV by using a gridded ionization chamber. Neutrons were produced through the T(p, n) 3 He reaction. The absolute neutron flux was determined through the 238 U(n, f) reaction. Present results are compared with existing data

  4. Evaluation of the cleaner technology programme

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou; Jørgensen, Ulrik

    The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

  5. 7 CFR 2902.34 - Carpet and upholstery cleaners.

    Science.gov (United States)

    2010-01-01

    ... procurement applies are: (i) General purpose cleaners. Carpet and upholstery cleaners formulated for use in... PROCUREMENT Designated Items § 2902.34 Carpet and upholstery cleaners. (a) Definition. (1) Cleaning products... upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of...

  6. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REMOVAL

    Science.gov (United States)

    A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...

  7. Health disparities between immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Jørgensen, Marie B; Rasmussen, Charlotte D N; Carneiro, Isabella G

    2011-01-01

    hundred and fifty-one cleaners, consisting of 166 Danes (88% women) and 179 immigrants (74% women) (6 with unknown ethnicity), from 9 workplaces in Denmark participated in the study. Health and work ability were obtained by objective (e.g., BMI and blood pressure) and self-reported measures (e.g., work......PURPOSE: It is unknown whether immigrants working in the cleaning industry have a poorer health and work ability than cleaners from the native population. The main aim was to investigate differences in objective and self-reported health measures between immigrant and Danish cleaners. METHODS: Three...... ability, self-rated health, and musculoskeletal symptoms). In order to investigate differences between Danish and immigrant cleaners, logistic regression analyses and General Linear Models were performed. RESULTS: When controlling for age, sex, workplace, job seniority, and smoking, more Danish compared...

  8. Education and Manpower development for Cleaner Production

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    An overview of the needs for education and training for dissemination and implementation of cleaner production. Expericne from training in companies and training of officials from public authorities and from integration into engineering, business and management and social science curricula...

  9. ENERGY STAR Certified Room Air Cleaners

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Room Air Cleaners that are effective as of July...

  10. QFD analysis of RSRM aqueous cleaners

    Science.gov (United States)

    Marrs, Roy D.; Jones, Randy K.

    1995-01-01

    This paper presents a Quality Function Deployment (QFD) analysis of the final down-selected aqueous cleaners to be used on the Redesigned Solid Rocket Motor (RSRM) program. The new cleaner will replace solvent vapor degreasing. The RSRM Ozone Depleting Compound Elimination program is discontinuing the methyl chloroform vapor degreasing process and replacing it with a spray-in-air aqueous cleaning process. Previously, 15 cleaners were down-selected to two candidates by passing screening tests involving toxicity, flammability, cleaning efficiency, contaminant solubility, corrosion potential, cost, and bond strength. The two down-selected cleaners were further evaluated with more intensive testing and evaluated using QFD techniques to assess suitability for cleaning RSRM case and nozzle surfaces in preparation for adhesive bonding.

  11. Cottonseed protein, oil, and mineral status in near-isogenic Gossypium hirsutum cotton lines expressing fuzzy/linted and fuzzless/linted seed phenotypes under field conditions

    Directory of Open Access Journals (Sweden)

    Nacer eBellaloui

    2015-03-01

    Full Text Available Cotton is an important crop in the world and is a major source of oil for human consumption and cotton meal for livestock. Cottonseed nutrition (seed composition: protein, oil, and minerals determine the quality of seeds. Therefore, maintaining optimum levels of cottonseed nutrition is critical. Physiological and genetic mechanisms controlling the levels of these constituents in cottonseed are still largely unknown. Our previous research conducted under greenhouse conditions showed that seed and leaf nutrition differed between fuzzless and fuzzy seed isolines. Therefore, the objective of this research was to investigate the seed fuzz phenotype (trait effects on seed protein, oil, N, C, S, and minerals in five sets of near-isogenic mutant cotton lines for seed fuzz in a two-year experiment under field condition to evaluate the stability of the effect of the trait on seed nutrition. The isolines (genotypes in each set differ for the seed fuzz trait (fuzzless/linted seed line, N lines, and fuzzy/linted seed line, F lines. Results showed that seed protein was higher in the fuzzy genotype in all sets, but seed oil was higher in fuzzless genotype in all sets. The concentrations of seed Ca and C were higher in all fuzzless genotypes, but N, S, B, Fe, and Zn were higher in most of the fuzzy genotypes. Generally, minerals were higher in leaves of F lines, suggesting the translocation of minerals from leaves to seeds was limited. The research demonstrated that fiber development could be involved in cottonseed composition. This may be due to the involvement of fiber development in carbon and nitrogen metabolism, and the mobility of nutrients from leaves (source to seed (sink. This information is beneficial to breeders to consider fuzzless cottonseed for potential protein and oil use and select for higher oil or higher protein content, and to physiologists to further understand the mobility of minerals to increase the quality of cottonseed nutrition for

  12. Parallel Algorithm for GPU Processing; for use in High Speed Machine Vision Sensing of Cotton Lint Trash

    Directory of Open Access Journals (Sweden)

    Mathew G. Pelletier

    2008-02-01

    Full Text Available One of the main hurdles standing in the way of optimal cleaning of cotton lint isthe lack of sensing systems that can react fast enough to provide the control system withreal-time information as to the level of trash contamination of the cotton lint. This researchexamines the use of programmable graphic processing units (GPU as an alternative to thePC’s traditional use of the central processing unit (CPU. The use of the GPU, as analternative computation platform, allowed for the machine vision system to gain asignificant improvement in processing time. By improving the processing time, thisresearch seeks to address the lack of availability of rapid trash sensing systems and thusalleviate a situation in which the current systems view the cotton lint either well before, orafter, the cotton is cleaned. This extended lag/lead time that is currently imposed on thecotton trash cleaning control systems, is what is responsible for system operators utilizing avery large dead-band safety buffer in order to ensure that the cotton lint is not undercleaned.Unfortunately, the utilization of a large dead-band buffer results in the majority ofthe cotton lint being over-cleaned which in turn causes lint fiber-damage as well assignificant losses of the valuable lint due to the excessive use of cleaning machinery. Thisresearch estimates that upwards of a 30% reduction in lint loss could be gained through theuse of a tightly coupled trash sensor to the cleaning machinery control systems. Thisresearch seeks to improve processing times through the development of a new algorithm forcotton trash sensing that allows for implementation on a highly parallel architecture.Additionally, by moving the new parallel algorithm onto an alternative computing platform,the graphic processing unit “GPU”, for processing of the cotton trash images, a speed up ofover 6.5 times, over optimized code running on the PC’s central processing

  13. Geographic Names

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Geographic Names Information System (GNIS), developed by the United States Geological Survey in cooperation with the U.S. Board of Geographic Names, provides...

  14. Mitigation effects of radon decay products by air cleaner

    International Nuclear Information System (INIS)

    Kazuki Iwaoka; Tetsuo Ishikawa; Hidenori Yonehara; Shinji Tokonami

    2013-01-01

    One of the most effective methods for reducing exposure is the use of air cleaners. In this study, a dose mitigation of a commonly-used Japanese air cleaner under conditions in which aerosols are continuously supplied was investigated. Although the values of the EERC during an operation of air cleaner decreased, values of the f p increased with the use of air cleaner. An effective dose was calculated on the basis of our experimental results, resulting in the dose mitigation of about 40 % by the air cleaner. Air cleaners can be regarded as an effective tool for the dose mitigation under with conditions in which aerosols are continuously supplied. (author)

  15. Cleaner products : new tools, players and relationships

    DEFF Research Database (Denmark)

    Remmen, Arne

    focus in the Product Oriented Environmental Initiative. The purpose of this evaluation has been to assess experience from the initiatives to date against the intentions of the action plan, and to provide constructive input to help flesh out a future product-oriented initiative, including the activities...... linked to the new programme for cleaner products. The evaluation has focused on three selected sectors and on inter-sector product-oriented projects carried out under the Action Plan for Cleaner Technology 1993-97. The investigation has been carried out at the request of the Council for Recycling...

  16. Reference method for total water in lint cotton by automated oven drying combined with volumetric Karl Fischer titration

    Science.gov (United States)

    In a preliminary study to measure total water in lint cotton we demonstrated that volumetric Karl Fischer Titration of moisture transported by a carrier gas from an attached small oven is more accurate than standard oven drying in air. The objective of the present study was to assess the measuremen...

  17. Comparison of cotton square and boll damage and resulting lint and seed loss caused by verde plant bug, Creontiades signatus

    Science.gov (United States)

    Retention of bolls and squares (referred to as fruit retention), boll damage, and resulting cotton lint and seed weight loss were assessed when two (2010) and three (2011) age classes of sympodial fruiting branches with different ages of squares and bolls where exposed to verde plant bug, Creontiade...

  18. Cleaner Technology in Denmark - support measures and regulatory efforts

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2005-01-01

    Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact....

  19. RELATION BETWEEN FUNCTION AND FORM IN VACUUM CLEANERS DESIGN

    Directory of Open Access Journals (Sweden)

    RADU Ștefan

    2015-11-01

    Full Text Available The paper analyses how robotic vacuum cleaner works, describing their cleaning capabilities and additional features. The paper illustrates advantages of using robotic vacuum cleaners that have intelligent programming and a vacuum cleaning system, the components of a robotic vacuum cleaner. The paper develops aspects concerning to create 2D scale models for the evaluation of specific features of the new components for a prototype robotic vacuum cleaner.

  20. Identification of Marker-Trait Associations for Lint Traits in Cotton

    Science.gov (United States)

    Iqbal, Muhammad A.; Rahman, Mehboob-ur-

    2017-01-01

    Harvesting high quality lint, a long-awaited breeding goal—accomplished partly, can be achieved by identifying DNA markers which could be used for diagnosing cotton plants containing the desired traits. In the present studies, a total of 185 cotton genotypes exhibiting diversity for lint traits were selected from a set of 546 genotypes evaluated for fiber traits in 2009. These genotypes were extensively studied for three consecutive years (2011–2013) at three different locations. Significant genetic variations were found for average boll weight, ginning out turn (GOT), micronaire value, staple length, fiber bundle strength, and uniformity index. IR-NIBGE-3701 showed maximum GOT (43.63%). Clustering of genotypes using Ward's method was found more informative than that of the clusters generated by principal component analysis. A total of 382 SSRs were surveyed on 10 Gossypium hirsutum genotypes exhibiting contrasting fiber traits. Out of these, 95 polymorphic SSR primer pairs were then surveyed on 185 genotypes. The gene diversity averaged 0.191 and the polymorphic information content (PIC) averaged 0.175. Unweighted pair group method with arithmetic mean (UPGMA), principal coordinate analysis (PCoA), and STRUCTURE software grouped these genotypes into four major clusters each. Genetic distance within the clusters ranged from 0.0587 to 0.1030. A total of 47 (25.41%) genotypes exhibited shared ancestry. In total 6.8% (r2 ≥ 0.05) and 4.4% (r2 ≥ 0.1) of the marker pairs showed significant linkage disequilibrium (LD). A number of marker-trait associations (in total 75) including 13 for average boll weight, 18 for GOT percentage, eight for micronaire value, 18 for staple length, three for fiber bundle strength, and 15 for uniformity index were calculated. Out of these, MGHES-51 was associated with all the traits. Most of the marker-trait associations were novel while few validated the associations reported in the previous studies. High frequency of favorable

  1. 7 CFR 2902.48 - General purpose household cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose household cleaners. 2902.48 Section... PROCUREMENT Designated Items § 2902.48 General purpose household cleaners. (a) Definition. Products designed... procurement preference for qualifying biobased general purpose household cleaners. By that date, Federal...

  2. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REPLACEMENTS

    Science.gov (United States)

    This guide describes available and emerging cleaner technologies that can be used to reduce emissions and wastes from paint and coatings applications. Environmental concerns and increasing costs of organic chemicals and metals are leading to changes in the formulation of organic ...

  3. Breathing easier: Indonesia works towards cleaner air

    International Nuclear Information System (INIS)

    Madsen, Michael Amdi

    2015-01-01

    Indonesians can look forward to breathing cleaner air following upcoming changes in regulations introduced as a result of a study conducted using nuclear analytical techniques. Lead pollution and other fine particulate matter in the air is now, for the first time, being accurately monitored and is giving Indonesian officials a good understanding of their air pollution problem and how to manage it.

  4. Electronic air cleaners and the indoor environment

    International Nuclear Information System (INIS)

    Krafthefer, B.

    1986-01-01

    The growing awareness over the quality of air in the indoor environment is driving the search for effective control methods for the contaminants of concern. Electronic air cleaners can control such pollutants as dust, pollen, tobacco smoke, radon decay products, and other particulates. This paper presents an examination of the various types of electronic air cleaners and their effects on indoor pollutants. It also examines the mechanism for contaminant removal, the relationship of the efficiency to the characteristics of the contaminant, and what type of contaminants can be controlled with the electronic air cleaner, with particular emphasis placed on the removal of radon decay products. From a study on radon product removal in residences, the electronic air cleaner was found to have an efficiency of up to 70%. Not only was there a reduction in the residential working level, but the fluctuations in the working level were also reduced. With this information, they can better understand how to solve the air treatment problem of the inhabited space. 17 references, 8 figures

  5. Water quality of surface runoff and lint yield in cotton under furrow irrigation in Northeast Arkansas.

    Science.gov (United States)

    Adviento-Borbe, M Arlene A; Barnes, Brittany D; Iseyemi, Oluwayinka; Mann, Amanda M; Reba, Michele L; Robertson, William J; Massey, Joseph H; Teague, Tina G

    2018-02-01

    Use of furrow irrigation in row crop production is a common practice through much of the Midsouth US and yet, nutrients can be transported off-site through surface runoff. A field study with cotton (Gossypium hirsutum, L.) was conducted to understand the impact of furrow tillage practices and nitrogen (N) fertilizer placement on characteristics of runoff water quality during the growing season. The experiment was designed as a randomized complete block design with conventional (CT) and conservation furrow tillage (FT) in combination with either urea (URN) broadcast or 32% urea ammonium nitrate (UAN) injected, each applied at 101kgNha -1 . Concentrations of ammonium (NH 4 -N), nitrate (NO 3 -N), nitrite (NO 2 -N), and dissolved phosphorus (P) in irrigation runoff water and lint yields were measured in all treatments. The intensity and chemical form of nutrient losses were primarily controlled by water runoff volume and agronomic practice. Across tillage and fertilizer N treatments, median N concentrations in the runoff were water. Water pH, specific electrical conductivity, alkalinity and hardness were within levels that common to local irrigation water and less likely to impair pollution in waterways. Lint yields averaged 1111kgha -1 and were higher (P-value=0.03) in FT compared to CT treatments. Runoff volumes across irrigation events were greater (P-value=0.02) in CT than FT treatments, which increased NO 3 -N mass loads in CT treatments (394gNO 3 -Nha -1 season -1 ). Nitrate-N concentrations in CT treatments were still low and pose little threat to N contaminations in waterways. The findings support the adoption of conservation practices for furrow tillage and N fertilizer placement that can reduce nutrient runoff losses in furrow irrigation systems. Published by Elsevier B.V.

  6. The local implementation of clean(er) fuels policies in Europe. A Handbook with guidelines. Final version

    International Nuclear Information System (INIS)

    Mulder, F.; Amara, Sliman Abu; Uustal, M.; Pelkmans, L.; Devriendt, N.; Rogulska, M.; Defranceschi, P.

    2009-05-01

    This handbook aims to guide the local/regional governments all over Europe who are involved in implementing clean(er) fuel policies in transport. The general challenge these governments are facing is how local policies on clean(er) fuels and vehicles can be made operational. Hence, how can the step be made from a vision on the strategic policy level, to a vision on the implementation of these policies. A local/regional policy on clean(er) fuels and vehicles is commonly part of the larger category 'sustainable transport policy', which in itself is part of a broader local environmental policy. The encompassing local/regional sustainable mobility policy will in most cases be based on the three well known main policy aims in this area: CO2 reduction; Improving the local air quality; and Improving the security of supply (locally often less stressed). This handbook will focus on the actual implementation of a clean(er) fuels and vehicles policy. It will describe the main challenges and how these can be overcome. It will describe how the market conditions for clean(er) fuels and vehicles can be created by establishing the vital market elements and which process is required to do so. And it will show how local enterprises can be involved and what the role of the local governments in this process can be. In order to identify the local success factors in overcoming the main challenges for implementation, case studies have been carried out in three European cities, namely Stockholm (Sweden), Graz (Austria) and Lille (France). The choice of these cities was based on their successes in implementing clean(er) fuel policies (although they followed different paths) and the fact that they managed to achieve ambitious clean(er) fuel/ clean(er) vehicle targets. These cities may thus be considered as ?good practice examples?. The case studies are based on existing literature, on multiple stakeholders? interviews in all three cities, and on two small surveys. The objectives of this

  7. Parasite infestation increases on coral reefs without cleaner fish

    Science.gov (United States)

    Grutter, A. S.; De Brauwer, M.; Bshary, R.; Cheney, K. L.; Cribb, T. H.; Madin, E. M. P.; McClure, E. C.; Meekan, M. G.; Sun, D.; Warner, R. R.; Werminghausen, J.; Sikkel, P. C.

    2018-03-01

    Mutualisms are pivotal in shaping ecological communities. Iconic images of cleaner fish entering the mouths of predatory fish clients to remove ectoparasites epitomize their mutual benefit. Experimental manipulations of cleaner wrasse reveal declines in fish size and growth, and population abundance and diversity of client fishes in the absence of cleaner wrasse. Fishes grow more slowly and are less abundant and diverse on reefs without cleaner wrasse, both for larger species that are regularly cleaned and have high ectoparasite loads ("attractive species"), and for those smaller species that are rarely cleaned and are rarely infested with parasites ("unattractive species"). We therefore considered whether these previously observed declines in individual and population parameters on reefs without cleaners were related to increased ectoparasite infestation using an attractive species ( Hemigymnus melapterus, Labridae) and an unattractive species ( Pomacentrus amboinensis, Pomacentridae). Traps with these fish as a form of bait were deployed to sample blood-sucking gnathiid ectoparasites (Gnathiidae: Isopoda) on reefs from which cleaners ( Labroides dimidiatus, Labridae) have been removed for 13 yr. Cleaner fish could not enter traps to access the clients/hosts, but gnathiids could enter the traps to infest hosts; thus, this method sampled the indirect effect of cleaners on gnathiid infestation of fish. Infestation was higher on reefs without cleaners than on those with them. The effect was only detected during the daytime when cleaners are active and only on the attractive species ( H. melapterus). Thus, cleaner presence indirectly reduced fish exposure to parasites in a species that is highly susceptible to parasites, but not in one that is rarely infested with parasites. This suggests that cleaner presence indirectly reduces exposure of a common fish species to harmful parasites, which may explain some observed benefits in fishes at this location.

  8. Occupational exposures and health outcomes among Latina hotel cleaners.

    Science.gov (United States)

    Hsieh, Yu-Chin Jerrie; Apostolopoulos, Yorghos; Hatzudis, Kiki; Sönmez, Sevil

    2014-01-01

    The poor working conditions of Latina hotel cleaners render them particularly vulnerable to elevated occupational hazards that lead to adverse health outcomes. This article presents a comprehensive review of occupational risks (including physical, chemical, biological, and psychosocial risk factors) and health outcomes (including musculoskeletal disorders, respiratory diseases, dermatological diseases and allergies, and psychological disorders) for Latina hotel cleaners, within their unique sociocultural contexts. Preventive interventions for improving Latina hotel cleaners' work and health conditions are recommended.

  9. L(3)mbt and the LINT complex safeguard cellular identity in the Drosophila ovary.

    Science.gov (United States)

    Coux, Rémi-Xavier; Teixeira, Felipe Karam; Lehmann, Ruth

    2018-04-04

    Maintenance of cellular identity is essential for tissue development and homeostasis. At the molecular level, cell identity is determined by the coordinated activation and repression of defined sets of genes. The tumor suppressor L(3)mbt has been shown to secure cellular identity in Drosophila larval brains by repressing germline-specific genes. Here, we interrogate the temporal and spatial requirements for L(3)mbt in the Drosophila ovary, and show that it safeguards the integrity of both somatic and germline tissues. l(3)mbt mutant ovaries exhibit multiple developmental defects, which we find to be largely caused by the inappropriate expression of a single gene, nanos , a key regulator of germline fate, in the somatic ovarian cells. In the female germline, we find that L(3)mbt represses testis-specific and neuronal genes. At the molecular level, we show that L(3)mbt function in the ovary is mediated through its co-factor Lint-1 but independently of the dREAM complex. Together, our work uncovers a more complex role for L(3)mbt than previously understood and demonstrates that L(3)mbt secures tissue identity by preventing the simultaneous expression of original identity markers and tissue-specific misexpression signatures. © 2018. Published by The Company of Biologists Ltd.

  10. Cleaner production technology for the NDT industry

    International Nuclear Information System (INIS)

    Relunia, Estrella D.; Mateo, Alejandro J.

    2001-01-01

    This paper discusses te wastes generated from the conduct of nondestructive testing (NDT) techniques and operations like NDT film processing and the systems to reduce water pollution and the film system quality control. Discussions on clean technology production concepts and philosophy is also discussed. A case study on cleaner production technology where a process and equipment modifications and a product substitution were implemented is presented. The equipment modification and product substitution eliminated the use of 1,1,1-trichloroethane in its cleaning operation. (Author)

  11. Ethnic Mobilization among Korean Dry Cleaners

    OpenAIRE

    Thomas, Ward F; Ong, Paul

    2015-01-01

    Korean immigrants in the U.S. rely heavily on ethnic resources to start small businesses.  Ethnic resources include business networks and knowledge, start-up capital, and access to labor power that are embedded in networks of family, friends, and co-ethnics.  This paper shows how Korean dry cleaners in Southern California used ethnic resources to mobilize in response to an environmental policy initiated by the South Coast Air Quality Management District (AQMD).  While Korean immigrants used e...

  12. Successes emerge in search for cleaner processes

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Faced with mounting public and regulatory pressures, many chemical producers have long adopted pollution reduction efforts. But increasingly, firms are eyeing fundamental process changes to achieve cleaner technologies. In addition to environmental benefits, the promised economic payoffs are clear: higher yields and an escape from soaring waste treatment and disposal costs. Having such technologies, says Paolo Galli, Montecatini's (Milan) director/corporate research, is a tremendous tool. It's becoming an increasingly important competitive element. Indeed, suggests David Hyde, ICI's (London) manager/environmental technology, everyone is looking to use cleaner technologies for a competitive advantage. A number of leading technology groups, including UOP (Des Plaines, IL), are working on replacing hydrofluoric acid (HF) with solid catalysts in alkylation processes. Although it is technologically tough to replace HF or alternative sulfuric acid technology, the rewards could be huge in producing high-octane fuel additives. Catalytica (Mountain View, CA), for one, is building a pilot plant with partners Neste (Helsinki) and Du Pont's Conoco. The company has developed a process to manufacture high-purity DMC by direct synthesis from carbom monoxide, methanol, and oxygen. The medium-pressure process uses a copper salts catalyst system; EniChem says the only significant by-product is carbon dioxide, and there are no chlorinated impurities

  13. Cleaner technology diffusion: case studies, modeling and policy. Editorial

    NARCIS (Netherlands)

    Montalvo Corral, C.; Kemp, R.

    2008-01-01

    The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

  14. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for..., provided: (a) The quantity of contents is expressed in terms of numerical count of the bags; (b) A...

  15. Materials Compatibility Testing in RSRM ODC: Free Cleaner Selection

    Science.gov (United States)

    Keen, Jill M.; Sagers, Neil W.; McCool, Alex (Technical Monitor)

    2001-01-01

    Government regulations have mandated production phase-outs of a number of solvents, including 1,1,1-trichloroethane, an ozone-depleting chemical (ODC). This solvent was used extensively in the production of the Reusable Solid Rocket Motors (RSRMs) for the Space Shuttle. Many tests have been performed to identify replacement cleaners. One major area of concern in the selection of a new cleaner has been compatibility. Some specific areas considered included cleaner compatibility with non-metallic surfaces, painted surfaces, support materials such as gloves and wipers as well as corrosive properties of the cleaners on the alloys used on these motors. The intent of this paper is to summarize the test logic, methodology, and results acquired from testing the many cleaner and material combinations.

  16. Assessment of In-Season Cotton Nitrogen Status and Lint Yield Prediction from Unmanned Aerial System Imagery

    Directory of Open Access Journals (Sweden)

    Carlos Ballester

    2017-11-01

    Full Text Available The present work assessed the usefulness of a set of spectral indices obtained from an unmanned aerial system (UAS for tracking spatial and temporal variability of nitrogen (N status as well as for predicting lint yield in a commercial cotton (Gossypium hirsutum L. farm. Organic, inorganic and a combination of both types of fertilizers were used to provide a range of eight N rates from 0 to 340 kg N ha−1. Multi-spectral images (reflectance in the blue, green, red, red edge and near infrared bands were acquired on seven days throughout the season, from 62 to 169 days after sowing (DAS, and data were used to compute structure- and chlorophyll-sensitive vegetation indices (VIs. Above-ground plant biomass was sampled at first flower, first cracked boll and maturity and total plant N concentration (N% and N uptake determined. Lint yield was determined at harvest and the relationships with the VIs explored. Results showed that differences in plant N% and N uptake between treatments increased as the season progressed. Early in the season, when fertilizer applications can still have an effect on lint yield, the simplified canopy chlorophyll content index (SCCCI was the index that best explained the variation in N uptake and plant N% between treatments. Around first cracked boll and maturity, the linear regression obtained for the relationships between the VIs and both plant N% and N uptake was statistically significant, with the highest r2 values obtained at maturity. The normalized difference red edge (NDRE index, and SCCCI were generally the indices that best distinguished the treatments according to the N uptake and total plant N%. Treatments with the highest N rates (from 307 to 340 kg N ha−1 had lower normalized difference vegetation index (NDVI than treatments with 0 and 130 kg N ha−1 at the first measurement day (62 DAS, suggesting that factors other than fertilization N rate affected plant growth at this early stage of the crop. This fact

  17. Epidemiology of occupational injury among cleaners in the healthcare sector.

    Science.gov (United States)

    Alamgir, Hasanat; Yu, Shicheng

    2008-09-01

    The cleaning profession has been associated with multiple ergonomic and chemical hazards which elevate the risk for occupational injury. This study investigated the epidemiology of occupational injury among cleaners in healthcare work settings in the Canadian province of British Columbia. Incidents of occupational injury among cleaners, resulting in lost time from work or medical care, over a period of 1 year in two healthcare regions were extracted from a standardized operational database and with person-years obtained from payroll data. Detailed analysis was conducted using Poisson regression modeling. A total of 145 injuries were identified among cleaners, with an annual incidence rate of 32.1 per 100 person-years. After adjustment for age, gender, subsector, facility, experience and employment status, Poisson regression models demonstrated that a significantly higher relative risk (RR) of all injury, musculoskeletal injury and cuts was associated with cleaning work in acute care facilities, compared with long-term care facilities. Female cleaners were at a higher RR of all injuries and contusions than male cleaners. A lower risk of all injury and allergy and irritation incidents among part-time or casual workers was found. Cleaners with >10 years of experience were at significantly lower risk for all injury, contusion and allergy and irritation incidents. Cleaners were found to be at an elevated risk of all injury categories compared with healthcare workers in general.

  18. Beyond symbiosis: cleaner shrimp clean up in culture.

    Science.gov (United States)

    Militz, Thane A; Hutson, Kate S

    2015-01-01

    Cleaner organisms exhibit a remarkable natural behaviour where they consume ectoparasites attached to "client" organisms. While this behaviour can be utilized as a natural method of parasitic disease control (or biocontrol), it is not known whether cleaner organisms can also limit reinfection from parasite eggs and larvae within the environment. Here we show that cleaner shrimp, Lysmata amboinensis, consume eggs and larvae of a harmful monogenean parasite, Neobenedenia sp., in aquaculture. Shrimp consumed parasite eggs under diurnal (63%) and nocturnal (14%) conditions as well as infectious larvae (oncomiracidia) diurnally (26%). Furthermore, we trialled the inclusion of cleaner shrimp for preventative parasite management of ornamental fish, Pseudanthias squamipinnis, and found shrimp reduced oncomiracidia infection success of host fish by half compared to controls (held without shrimp). Fish held without cleaner shrimp exhibited pigmentation changes as a result of infection, possibly indicative of a stress response. These results provide the first empirical evidence that cleaner organisms reduce parasite loads in the environment through non-symbiotic cleaning activities. Our research findings have relevance to aquaculture and the marine ornamental trade, where cleaner shrimp could be applied for prophylaxis and control of ectoparasite infections.

  19. Cleaner Coal in China [Chinese Version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s coal, mined locally and available at a relatively low cost, has brought enormous benefits to energy consumers in China and to those outside the country who enjoy the products of its coal-based economy. Yet from another perspective, China’s coal use has a high cost. Despite progress, health and safety in the thousands of small coal mines lag far behind the standards achieved in China’s modern, large mines. Environmental degradation is a real and pressing problem at all stages of coal production, supply and use. Adding to these burdens, emissions of carbon dioxide are of concern to the Chinese government as it embarks on its own climate protection strategy. Technology solutions are already transforming the way coal is used in China and elsewhere. This study explores the context in which the development and deployment of these technologies can be accelerated. Providing a large amount of new data, it describes in detail the situation in China as well as the experiences of other countries in making coal cleaner. Above all, the report calls for much greater levels of collaboration – existing bi-lateral and multi-lateral co-operation with China on coal is found lacking. China’s growing openness

  20. The Development Of Cleaner Production Practices Between Environmental

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2003-01-01

    (DANCED), Ministry of Environment and Energy. Small and medium-scale enterprises (SMEs) were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen......, presenting figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention...... towards sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project ‘A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner...

  1. [Effectiveness and limits of the cleaners steam in hospitals].

    Science.gov (United States)

    Meunier, O; Meistermann, C; Schwebel, A

    2009-05-01

    We assessed bactericidal activity of the cleaners steam used for the bio-cleaning of the hospital surfaces. We performed of samples (Rodac) before and after use of cleaner steam and compared with bactericidal effect of disinfecting detergent used in hospital for surfaces. We studied this effectiveness for different time of steam contact. Finally, we wanted to prove, by air sampling, that aero-bio-contamination was possible generated by using cleaners steam. We show that bactericidal effect of the cleaner steam is superior of some tested disinfecting detergent, for the treatment of one square meter till 2 min. This effectiveness diminishes to be just identical in that some disinfecting detergent when use of the cleaner steam is up to two or four square meters surfaces till 2 min. On the other hand, the cleaner steam is less efficient in terms of bacterial destruction when the time of contact steam-soil is superior in 2 min for six square meter surface. The air bacterial pollution, generated by the use of the cleaner steam, is restricted and not significantly augmented if measured in 44 cm above the soil in the course of cleaning. The cleaner steam is indeed a very good equipment for the cleaning of surfaces but it is necessary to respect a time of minimal contact of 2 min for four square meters surfaces treaties to acquire an antibacterial effect at least so important as that acquired with used disinfecting detergent. The disinfection of surfaces is then user-dependent and the time of requested contact is can be not compatible with hospital obligations.

  2. Hospital trash: cleaners speak of their role in disease prevention.

    Science.gov (United States)

    Messing, K

    1998-06-01

    Feminist researchers have contrasted the caring provided by women in hospitals with a more fragmented "curing" approach, which they identify with the predominantly male professions of medicine and surgery. The author spoke with hospital cleaners about their jobs and their health. Several themes emerged: the invisibility of the cleaning function, lack of respect for cleaners, representations of cleaning as undemanding, and assumptions that women's work in cleaning is particularly easy. Cleaners use various strategies to combat these stereotypes but receive little help from administrators or fellow employees. There is a hierarchy in the status of Québec hospital workers with curing (doctors) at the top, followed by caring and healing (nurses, therapists, and attendants), and hygiene (cleaners, sterilizers, and launderers) at the bottom. Authority hierarchies in health care are not related to gender in a simple way, although there is discrimination against women cleaners. The fact that cleaning, especially cleaning performed by women, is invisible to managers, other hospital personnel, and patients has important consequences for cleaners' and for patients' health.

  3. Evaluation of electrolytic alkaline cleaners by evaporative-rate analysis

    International Nuclear Information System (INIS)

    Hamilton, C.B.

    1975-01-01

    A method has been developed by which electrolytic alkaline cleaners used in large volumes in steel mills can be evaluated for their ability to clean rolling oil from steel strip without the necessity of large-scale mill trials. The method is evaporative-rate analysis, which can be used to determine the relative amount of residual oil on steel strip after cleaning. The procedure consists in placing a droplet of a solution of a volatile, radioactive, carbon-14 tagged organic compound dissolved in a more volatile solvent, on the surface of the metal, where it forms a ternary solution with any oil on the surface. The amount of oil in this ternary solution affects the rate of evaporation of the tagged compound. The rate of evaporation, monitored by a Geiger-Mueller detector, is a measure of the cleanliness of the surface. A number of commercial alkaline cleaners, both solids and liquids, were evaluated over a range of concentrations. Results indicated that the effectiveness of commercial alkaline cleaners varies greatly, and is a function of the cleaner concentration, cleaner composition, and polarity of cleaning. The presence of antifoaming agents also affects cleaning ability. The results of this study indicate that evaporative-rate analysis is a rapid and effective method for evaluating cleaners

  4. Cleaner production: Minimizing hazardous waste in Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Bratasida, D.L. [BAPEDAL, Jakarta (Indonesia)

    1996-12-31

    In the second long-term development plan, industry plays a significant role in economic growth. In Indonesia, industries grow very fast; such fast growth can adversely effect the environment. Exploitation of assets can mean depletion of natural resources and energy, which, if incorrectly managed, can endanger human life and the environment. The inefficient use of natural resources will accelerate their exhaustion and generate pollution, resulting in environmental damage and threats to economic development and human well being. In recent years, changes in the approach used to control pollution have been necessary because of the increasing seriousness of the problems. Initial environmental management strategies were based on a carrying capacity approach; the natural assimilative capacity accommodated the pollution load that was applied. The environmental management strategies adopted later included technologies applied to the end of the discharge point (so-called {open_quotes}end-of-pipe{close_quotes} treatments). Until now, environmental management strategies focused on end-of-pipe approaches that control pollutants after they are generated. These approaches concentrate on waste treatment and disposal to control pollution and environmental degradation. However, as industry develops, waste volumes continue to increase, thereby creating further environmental problems. In addition, the wastes produced tend to have more complex characteristics and are potentially more difficult to treat for a reasonable cost. There are often technical and financial obstacles to regulatory compliance if waste treatment is relied on as the only means of achieving environmental objectives. Consequently, the reactive end-of-pipe treatment approach has been changed to a proactive cleaner production approach. This approach is based on the concept of sustainable development and is designed to prevent pollution as well as to protect natural resources and the quality of the environment.

  5. Development of a Modified Vacuum Cleaner for Lunar Surface Systems

    Science.gov (United States)

    Toon, Katherine P.; Lee, Steve A.; Edgerly, Rachel D.

    2010-01-01

    The National Aeronautics and Space Administration (NASA) mission to expand space exploration will return humans to the Moon with the goal of maintaining a long-term presence. One challenge that NASA will face returning to the Moon is managing the lunar regolith found on the Moon's surface, which will collect on extravehicular activity (EVA) suits and other equipment. Based on the Apollo experience, the issues astronauts encountered with lunar regolith included eye/lung irritation, and various hardware failures (seals, screw threads, electrical connectors and fabric contamination), which were all related to inadequate lunar regolith mitigation. A vacuum cleaner capable of detaching, transferring, and efficiently capturing lunar regolith has been proposed as a method to mitigate the lunar regolith problem in the habitable environment on lunar surface. In order to develop this vacuum, a modified "off-the-shelf' vacuum cleaner will be used to determine detachment efficiency, vacuum requirements, and optimal cleaning techniques to ensure efficient dust removal in habitable lunar surfaces, EVA spacesuits, and air exchange volume. During the initial development of the Lunar Surface System vacuum cleaner, systematic testing was performed with varying flow rates on multiple surfaces (fabrics and metallics), atmospheric (14.7 psia) and reduced pressures (10.2 and 8.3 psia), different vacuum tool attachments, and several vacuum cleaning techniques in order to determine the performance requirements for the vacuum cleaner. The data recorded during testing was evaluated by calculating particulate removal, relative to the retained simulant on the tested surface. In addition, optical microscopy was used to determine particle size distribution retained on the surface. The scope of this paper is to explain the initial phase of vacuum cleaner development, including historical Apollo mission data, current state-of-the-art vacuum cleaner technology, and vacuum cleaner testing that has

  6. A Man with No Name, or Too Many Names if You Think About it

    OpenAIRE

    Singh, Danvir

    2014-01-01

    Danvir. Jimmy. Danny V. Danny V & the Bumblebees. Danny Valentine. Double D. Deezus. D Weezy. DJ Takeover. Or ahh forget it. From lowly beginnings as a Window cleaner in Tin Pan Alley-era New York City singing "hello hello Tokio" to an "inn-keeper" in the countryside waxing rhapsodically about his famous battles while those around him push his buttons, this man with numerous names has had the opportunity to experience multiple worlds and the challenges that each of these bring up for the acto...

  7. Development of self-running underwater cleaner for nuclear facilities

    International Nuclear Information System (INIS)

    Ito, Haruo; Mizutani, Takeshi; Miki, Masamichi

    1979-01-01

    A self-running underwater cleaner for removing sediment accumulated on the bottoms of water tanks in nuclear power stations by remote operation was developed. This cleaner is used in the state maintaining the shielding effect of water against radiation as water is filled in equipment pits, and by the remote operation using cables, it runs freely in water and sucks bottom sediment. The sediment is transported through a drain hose to a treating facility in a power station, and treated in a lump. The cleaner is composed of the carriage with electric steering wheels and driving wheels and a high head submerged pump. Front and rear suction mouths are provided, and suck sediment with high speed water flow while scraping with rubber boards. The cleaner can be used in the water depth of 7 m, and as the results of practical test, it was confirmed that the decontaminating effect and maneuverability were very good so that the sediment at the corner was scarcely left behind, and the effects of labor saving and the reduction of exposure of employees were large. The fundamental experiments were carried out on the running mechanism, the coefficient of friction in water, and the construction of suction mouth. The trial manufacture of the under water cleaner, the water tank experiment and the test in the Mamaoka No. 1 plant are reported. (Kako, I.)

  8. Opportunities application of cleaner production practices in paint industry

    International Nuclear Information System (INIS)

    Mohammed, Y. S. Y.

    2010-08-01

    There are releases of volatile organic compounds VOC from paint manufacturing process steps and from cleaning operations in El Mohandas Paint Factory. These emission can cause health, safety and productivity problems in the work area. Hence cleaner production application is necessary in this case. Some of the manufacturing processes and equipment used to accomplish these manufacturing are analyzed and generate cleaner production opportunities, implement some of cleaner production solutions of VOC emission control by some of the methods used by paint facilities in reducing emissions. It was found that there is no control available for emissions factors in paints manufacturing process, so that VOC emission based on raw material consumption rather than calculation emission from processes or equipment by alternative method. (Author)

  9. The Life, Work and Recreational Physical Activity of Female Cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena

    The main aim of this article-based PhD thesis was to explore the recreational physical activity participation of female cleaners – an occupational group mainly consisting of minority ethnic women from non-western countries. As the PhD project was integrated in and financially supported...... by the Copenhagen Centre for Team Sport and Health, a part of the PhD project was to organize and evaluate a workplace physical activity programme that used team games as the main form of exercise. Via participant observation and semi-structured interviews with 42 cleaners and their supervisors I gained insights...... and employed different theories, they drew a coherent picture: the interviewees’ everyday lives as migrant cleaners in Denmark had a decisive influence on their opportunities to engage in recreational physical activity: most women struggled with the demands of a physically exhausting job and an extensive...

  10. Aerobic exercise reduces biomarkers related to cardiovascular risk among cleaners

    DEFF Research Database (Denmark)

    Korshøj, Mette; Ravn, Marie Højbjerg; Holtermann, Andreas

    2016-01-01

    PURPOSE: Blue-collar workers have an increased risk of cardiovascular disease. Accordingly, elevated levels of biomarkers related to risk of cardiovascular disease, such as high-sensitive C-reactive protein, have been observed among blue-collar workers. The objective was to examine whether...... an aerobic exercise worksite intervention changes the level of inflammation biomarkers among cleaners. METHODS: The design was a cluster-randomized controlled trial with 4-month worksite intervention. Before the 116 cleaners aged 18-65 years were randomized, they signed an informed consent form...

  11. Effect of time course application of nitrogen fertilizer on the N-fertilizer use efficiency, lint properties and seed cotton yield using 15N isotopic dilution technique

    International Nuclear Information System (INIS)

    Janat, M.; Khalifa, Kh

    2001-12-01

    Field experiment was carried out at Der El-Hajar research station during 1998 growing season to evaluate the effect of time course application of nitrogen fertilizer on N-recovery, seed cotton yield and lint properties using 15 N isotope dilution technique. Aleppo 40 variety was tested, irrigation scheduling was set up at 80% of field capacity. Phosphorus fertilizer was applied as TSP 46% before planting at a rate of 180 kg/ha. N fertilizer was applied as urea (46%) in four different applications follows: one application 180 kg N/ha before planting (T1), two split application 180 (90 + 90) kg N/ha (T2), three equally split applications 180 (60 + 60 + 60) kg N/ha (T3), and four equally split applications 180 (45 + 45 + 45 + 45) kg N/ha (T4). Labeled N-fertilizer (5.09 a.e%) was also applied as urea 46% to the subplots (1.0 m 2 each) of the corresponding treatments. All agricultural practices were carried out as the common practices locally employed. Soil samples were analyzed for CEC, ph, EC, OM, total N, available P, and CaCO 3 as outlined by our laboratory standard procedure. Plant samples were collected at physiological maturity and analyzed for 15 N enrichment to assess N recovery. Lint samples were analyzed for lint properties. the results showed no significant effect of the nitrogen fertilizer time course application on the tested parameters such as dry matter production, seed cotton yield, N uptake and lint properties. on the other hand the T2, T3 and T4 treatments where shown to have a positive significant response toward time course application relative to T1 treatment. (authors)

  12. The three names

    NARCIS (Netherlands)

    Bas Jongenelen

    2011-01-01

    Two spectators are each asked to think of a girl's name (because your sister in law is pregnant and names are a big issue at the moment in your family.) You explain that you have a boy's name in your head, and you ask the spectators to think what this boy's name might be. You write three names on a

  13. Planning of the evaluation of cleaner production experiences in the CEPITA companies

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1998-01-01

    The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95......The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95...

  14. 76 FR 71342 - Proposed CERCLA Administrative Cost Recovery Settlement; River Forest Dry Cleaners Site, River...

    Science.gov (United States)

    2011-11-17

    ... Settlement; River Forest Dry Cleaners Site, River Forest, Cook County, IL AGENCY: Environmental Protection... response costs concerning the River Forest Dry Cleaners site in River Forest, Cook County, Illinois with... code: C-14J, Chicago, Illinois 60604. Comments should reference the River Forest Dry Cleaners Site...

  15. On Cleaner Technologies in a Transboundary Pollution Game

    NARCIS (Netherlands)

    Benchekroun, H.; Ray Chaudhuri, A.

    2009-01-01

    We show that in a non-cooperative transboundary pollution game, a cleaner technology (i.e., a decrease in the emission to output ratio) induces each country to increase its emissions and ultimately can yield a higher level of pollution and reduce social welfare.

  16. Evaluation of several air cleaners for reducing indoor radon progeny

    International Nuclear Information System (INIS)

    Hopke, P.K.; Jensen, B.; Montassier, N.

    1994-01-01

    Over the past several years, studies have been made of the effectiveness of several kinds of air cleaners in removing radon decay products from indoor air using a recently developed automated, semi-continuous measurement system that can determine the activity-weighted size distributions in occupied homes. Measurements of activity-weighted size distributions and radon concentrations were made every 90 min in a home with a high air exchange rate. A week-long series of measurements was made for the home with no cleaner operating and a similar set of measurements were made for each of the air cleaners. Two different types of air cleaners were tested in this study; filtration units (two different designs from two different manufacturers) and two ion generator/fan systems (identical design NO-RAD systems, but from two different manufacturers). It was found that the filtration units resulted in a median reduction in exposure of 15% and 36% for the two units and corresponding dose reductions of 32% and 53%. The two NO-RAD systems produced 37% and 10% reductions in the median exposure, but the reductions in the median dose were 49% and 46%. (author)

  17. Cleaner Technologies and the Stability of International Environmental Agreements

    NARCIS (Netherlands)

    Benchekroun, H.; Ray Chaudhuri, A.

    2012-01-01

    Abstract: This paper shows that, if countries are farsighted when deciding whether to defect from a coalition, then the implementation of cleaner technologies may jeopardize the chances of reaching an international environmental agreement. The grand coalition may be destabilized by the

  18. Determination of Ammonia in Household Cleaners: An Instrumental Analysis Experiment.

    Science.gov (United States)

    Graham, Richard C.; DePew, Steven

    1983-01-01

    Briefly discusses three techniques for assessing amount of ammonia present in household cleaners. Because of disadvantages with these methods, the thermometric titration technique is suggested in which students judge the best buy based on relative cost of ammonia present in samples. Laboratory procedures, typical results, and reactions involved…

  19. Psychosocial work environment among immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Olesen, Kasper; Carneiro, Isabella G; Jørgensen, Marie B

    2012-01-01

    Non-Western cleaners have been shown to have poorer health than their Danish colleagues. One reason could be a poorer psychosocial work environment. However, it is unknown if differences in self-reported psychosocial work environment exist between non-Western and Danish workers within the same so...

  20. Implementing Cleaner Technologies as a means of minimising waste production

    DEFF Research Database (Denmark)

    Wenzel, Henrik

    2002-01-01

    This article gives an overview of how Cleaner Production methods may contribute to minimising waste formation as well as showing energy and resource savings. It introduces the tools and procedures used when working in this field. It also illustrates the theoretical approach by using examples from...

  1. Psychosocial work factors and shoulder pain in hotel room cleaners.

    Science.gov (United States)

    Burgel, Barbara J; White, Mary C; Gillen, Marion; Krause, Niklas

    2010-07-01

    Hotel room cleaners have physically demanding jobs that place them at high risk for shoulder pain. Psychosocial work factors may also play a role in shoulder pain, but their independent role has not been studied in this group. Seventy-four percent (941 of 1,276) of hotel room cleaners from five Las Vegas hotels completed a 29-page survey assessing health status, working conditions, and psychosocial work factors. For this study, 493 of the 941 (52%) with complete data for 21 variables were included in multivariate logistic regression analyses. Fifty-six percent reported shoulder pain in the prior four weeks. Room cleaners with effort-reward imbalance (ERI) were three times as likely to report shoulder pain (OR 2.99, 95% CI 1.95-4.59, P = 0.000) even after adjustment for physical workload and other factors. After adjustment for physical workload, job strain and iso-strain were not significantly associated with shoulder pain. ERI is independently associated with shoulder pain in hotel room cleaners even after adjustment for physical workload and other risk factors. 2010 Wiley-Liss, Inc.

  2. 7 CFR 2902.18 - Hand cleaners and sanitizers.

    Science.gov (United States)

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR DESIGNATING BIOBASED PRODUCTS FOR FEDERAL PROCUREMENT Designated... the purposes of this rule. (b) Minimum biobased content. The minimum biobased content requirement for all hand cleaners and/or sanitizers shall be based on the amount of qualifying biobased carbon in the...

  3. Cleaner production for solid waste management in leather industry ...

    African Journals Online (AJOL)

    Cleaner production for solid waste management in leather industry. ... From the processes, wastes are generated which include wastewater effluents, solid wastes, and hazardous wastes. In developing countries including Ethiopia, many ... The solid waste inventory of the factory has been carried out. The major problems ...

  4. An overview of cleaner fish use in Ireland.

    Science.gov (United States)

    Bolton-Warberg, M

    2017-11-21

    Sea lice infestations represent one of the most significant challenges facing the salmon farming industry, giving rise to lost production, additional costs of treatment and potential negative interactions with wild stocks. At present, cleaner fish, which actively remove lice from salmon, are an effective, biological, long-term option which has been adopted by many countries. In Ireland, several key studies were conducted in the 1990s on the use of wild-caught wrasse (corkwing, goldsinny and rock cook) as cleaner fish in experimental and commercial scale trials. More recently, the National University of Ireland Galway (NUIG), at their marine research facility in Carna (CRS), has undertaken applied research on ballan wrasse and lumpsucker. Currently, CRS is providing lumpsucker juveniles and research and development for the Irish salmon industry with support from BIM (Ireland's Seafood Development Agency) and Marine Harvest Ireland. There is a large amount of research currently being carried out in this area in all countries that are utilizing cleaner fish technology. The current focus in Ireland is the development of a native lumpsucker broodstock to facilitate its sustainable production. The aim of this article was to provide an overview of the research, challenges and use of cleaner fish in Ireland. © 2017 The Authors Journal of Fish Diseases Published by John Wiley & Sons Ltd.

  5. Actual problems of municipal cleaner’s waste waters

    Directory of Open Access Journals (Sweden)

    Konko¾ová Patrícia

    2000-03-01

    Full Text Available In paper are evaluated social and economical changes in water economy with emphasis on complex evaluation of municipal cleaner’s waste waters with respect of legislative, position of ownerskip relationskips and financial security of public experiences of water economy.

  6. COREXIT 9580 shoreline cleaner: Development, application, and status

    International Nuclear Information System (INIS)

    Canevari, G.P.; Fiocco, R.J.; Lessard, R.R.; Fingas, M.

    1995-01-01

    This paper will describe research on chemical beach cleaners for treatment of oiled shorelines that was initiated in support of the cleaning activities in Prince William Sound (PWS) following the Valdez oil spill in March 1989. The concept for using beach cleaners for shoreline cleanup is to apply a pre-soak to the weathered crude oil on shore and then flush with sea water to wash the oil into a boomed area for subsequent recovery. Criteria imposed on the use of chemical beach cleaners for the cleanup of the Valdez spill were: (1) effective rock cleaning agents should have very little or no toxicity to marine and terrestrial life, (2) there should be no dispersion of the oil washed from the shoreline into the water column; oil was to be recovered by techniques such as skimming or sorbents, and (3) the agents should be on the EPA National Contingency Plan (NCP) list. A laboratory-scale rock washing test was developed to measure cleaner effectiveness and dispersion. A large number of commercially available formulated products were evaluated, as well as development formulations. The commercial products included all of the available NCP-listed products which could function as cleaners. None of the commercial products completely satisfied all the requirements established by the agencies for beach cleaning. However, a new formula, called COREXIT 9580, consisting of two surfactants and a solvent was developed. It exhibited low fish toxicity, low dispersancy and effective rock cleaning capability. The paper reviews the laboratory and field testing to explore the potential use of the COREXIT 9580 to save and restore oiled vegetation

  7. What's in a Name

    Science.gov (United States)

    Bush, Sarah B.; Albanese, Judith; Karp, Karen S.

    2016-01-01

    Historically, some baby names have been more popular during a specific time span, whereas other names are considered timeless. The Internet article, "How to Tell Someone's Age When All You Know Is Her Name" (Silver and McCann 2014), describes the phenomenon of the rise and fall of name popularity, which served as a catalyst for the…

  8. British Sign Name Customs

    Science.gov (United States)

    Day, Linda; Sutton-Spence, Rachel

    2010-01-01

    Research presented here describes the sign names and the customs of name allocation within the British Deaf community. While some aspects of British Sign Language sign names and British Deaf naming customs differ from those in most Western societies, there are many similarities. There are also similarities with other societies outside the more…

  9. Distribution of Chinese names

    Science.gov (United States)

    Huang, Ding-wei

    2013-03-01

    We present a statistical model for the distribution of Chinese names. Both family names and given names are studied on the same basis. With naive expectation, the distribution of family names can be very different from that of given names. One is affected mostly by genealogy, while the other can be dominated by cultural effects. However, we find that both distributions can be well described by the same model. Various scaling behaviors can be understood as a result of stochastic processes. The exponents of different power-law distributions are controlled by a single parameter. We also comment on the significance of full-name repetition in Chinese population.

  10. Cleaner Production: A Growing Movement in Brazilian Companies

    Directory of Open Access Journals (Sweden)

    Oduvaldo Vendrametto

    2010-03-01

    Full Text Available Cleaner Production (CP is gaining emphasis in both world and Brazilian production sectors. Nature’s warnings indicating the exhaustion of any capacity to absorb and regenerate waste, stricter legislation regarding pollution emitters, market competitiveness associated with environmental and social responsibility cause concerns and lead to actions to reduce aggressions against the environment. This paper shows evidence of this concern and presents cases in which a large automotive industry, acting as a partner to suppliers, promotes changes in how it delivers its products, eliminating large cardboard, plastic and wood packaging. A small company had a similar initiative, reducing the use of cardboard and plastic packaging. More important is the revelation of a widely dispersed, yet growing and incremental movement of responsibilities among companies.The benefits of cleaner production implementation were evaluated by confronting environmental and financial assessment. For the ambient evaluation, it will be used methodology of Material Intensity (Wuppertal Institute, a.

  11. Cleaners in reducing the hazards of indoor radon decay products

    International Nuclear Information System (INIS)

    Montassier, N.; Hopke, P.K.; Shi, Y.; Wasiolek, P.; McCallum, B.

    1992-01-01

    The objective of this study was to evaluate the influence of three types of air cleaners on the concentration and size distribution of radon progeny in a normally occupied house. Using an automated, semi-continuous, graded-screen array system and a radon monitor, the activity size distribution and radon concentration was measured and the exposure of the occupants of the home to radon could be assessed. The dose model developed as part of the recently released U.S. National Academy of Sciences report was used to related the exposure to deposited dose in the tissue of the bronchial epithelium. Thus, the effectiveness of the air cleaners in reducing both exposure and dose were evaluated. (author)

  12. Guide to cleaner coal technology-related web sites

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, R; Jenkins, N; Zhang, X [IEA Coal Research - The Clean Coal Centre, London (United Kingdom)

    2001-07-01

    The 'Guide to Cleaner Coal Technology-Related Web Sites' is a guide to web sites that contain important information on cleaner coal technologies (CCT). It contains a short introduction to the World Wide Web and gives advice on how to search for information using directories and search engines. The core section of the Guide is a collection of factsheets summarising the information available on over 65 major web sites selected from organizations worldwide (except those promoting companies). These sites contain a wealth of information on CCT research and development, technology transfer, financing and markets. The factsheets are organised in the following categories. Associations, research centres and programmes; Climate change and sustainable development; Cooperative ventures; Electronic journals; Financial institutions; International organizations; National government information; and Statistical information. A full subject index is provided. The Guide concludes with some general comments on the quality of the sites reviewed.

  13. Marine Place Names

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the geographic place names for features in the U.S territorial waters and outer continental shelf. These names can be used to find or define a...

  14. Trochanteric Stress Fracture in a Female Window Cleaner

    OpenAIRE

    Lee, Bong-Jin; Song, Jyewon

    2016-01-01

    Stress fractures may occur at various sites in the femur including the head, neck, shaft, supracondylar and condylar regions. To the best of our knowledge, stress fracture occurring in the trochanteric region has not been previously reported. We report here a case of trochanteric stress fracture in a 53-year-old female window cleaner treated with hip nailing without adverse consequences. Careful consideration of this entity is needed when evaluating patients who have repetitive jumping up and...

  15. Cleaner production - a tool for sustainable environmental development

    International Nuclear Information System (INIS)

    Ahmad, I.; Batool, S.

    2005-01-01

    Industrial Development and Production with no regard for environmental impacts creates water and air pollution, soil degradation, and large-scale global impacts such as acid rain, global warming and ozone depletion. To create more sustainable methods of industrial production, there needs to be a shift in attitudes away from control towards pollution prevention and management. Cleaner Production (CP) refers to a management process that seeks out and eliminates the causes of pollution, waste generation and resource consumption at their source through input reductions or substitutions, pollution prevention, internal recycling and more efficient production technology and processes for sustainable environmental development. The objective of cleaner production is to avoid generating pollution in the first place, which frequently cuts costs, reduces risks associated with liability, and identifies new market opportunities. Introducing cleaner production has become a goal to improve the competitiveness through increased eco-efficiency. CP is a business strategy for enhancing productivity and environmental performance for overall socio-economic development. The environmental and economic benefits can only be achieved by implementing cleaner production tools. The CP assessment methodology is used to systematically identify and evaluate the waste minimization opportunities and facilitate their implementation in industries. It refers to how goods and services are produced with the minimum environmental impact under present technological and economic limits. CP shares characteristics with many environmental management tools such as Environmental Assessment or Design for Environment by including them among the technological options for reducing material and energy intensiveness in production, as well as facilitating ruse trough remanufacturing and recycling. It is thus an extension of the total quality management process. The CP program has been successfully implemented in

  16. Naming as Strategic Communication

    DEFF Research Database (Denmark)

    Schmeltz, Line; Kjeldsen, Anna Karina

    2016-01-01

    This article presents a framework for understanding corporate name change as strategic communication. From a corporate branding perspective, the choice of a new name can be seen as a wish to stand out from a group of similar organizations. Conversely, from an institutional perspective, name change...

  17. Employee participation and cleaner technology: learning processes in environmental teams

    DEFF Research Database (Denmark)

    Remmen, Arne; Lorentzen, Børge

    2000-01-01

    The approach to pollution prevention in Danish industries in the late-1980s and in the beginning of the 1990s met criticism, because the cleaner technology projects focused too narrowly on technical solutions implemented by experts. The objective of the project “Employee Participation in the Impl...... to improve the firms' environmental activities (e.g. setting up environmental policies, targets and action plans, implementing new procedures and technologies).......The approach to pollution prevention in Danish industries in the late-1980s and in the beginning of the 1990s met criticism, because the cleaner technology projects focused too narrowly on technical solutions implemented by experts. The objective of the project “Employee Participation...... in the Implementation of Cleaner Technology” was to develop a more active role for employees in the environmental activities of companies. Based on practical experiments in five Danish firms within different industrial sectors, the project concluded that employee participation can have a strong effect on changing...

  18. Primary DNA Damage in Dry Cleaners with Perchlorethylene Exposure

    Directory of Open Access Journals (Sweden)

    Mohammad Azimi

    2017-10-01

    Full Text Available Background: Perchloroethylene is a halogenated solvent widely used in dry cleaning. International agency of research on cancer classified this chemical as a probable human carcinogen. Objective: To evaluate the extent of primary DNA damage in dry cleaner workers who were exposed to perchloroethylene as compared to non-exposed subjects. The effect of exposure modifying factors such as use of personal protective equipment, perceived risk, and reported safe behaviors on observed DNA damage were also studied. Methods: 59 exposed and non-exposed workers were selected from Yazd, Iran. All the 33 exposed workers had work history at least 3 months in the dry cleaning shops. Peripheral blood sampling was performed. Microscope examination was performed under fluorescent microscope (400×. Open comet software was used for image analysis. All biological analysis was performed in one laboratory. Results: Primary DNA damage to leukocytes in dry cleaners was relatively high. The median tail length, %DNA in tail, and tail moment in exposed group were significantly higher than those in non-exposed group. There was no significant difference between smokers and nonsmokers in terms of tail length, tail moment, and %DNA in tail. There was no significant correlation between duration of employment in dry cleaning and observed DNA damage in terms of tail length, tail moment and %DNA in tail. Stratified analysis based on exposed and nonexposed category showed no significant relationship between age and observed DNA damage. Conclusion: Occupationally exposure to perchloroethylene can cause early DNA damage in dry cleaners.

  19. Integrated Technology Air Cleaners (ITAC): Design and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.; Cohn, Sebastian; Destaillats, Hugo; Henzel, Victor; Sidheswaran, Meera; Sullivan, Douglas P.

    2013-09-13

    The primary objective of this project was to design, build, and test an air cleaner for residential use with the potential to substantially improve indoor air quality, or maintain indoor air quality unchanged, when outdoor air ventilation rates are reduced to save energy. Two air cleaners were designed and fabricated. The design targets for airflow rate, fan power, and projected cost were met. In short term laboratory studies, both units performed as expected; however, during field studies in homes, the formaldehyde removal performance of the air cleaners was much lower than expected. In subsequent laboratory studies, incomplete decomposition of some indoor air volatile organic compounds, with formaldehyde as a product of partial decomposition of volatile organic compounds, was confirmed as the explanation for the poor formaldehyde removal performance in the field studies. The amount of formaldehyde produced per unit of decomposition of other volatile organic compounds was substantially diminished by increasing the amount of catalyst on the filter and also by decreasing the air velocity. Together, these two measures reduced formaldehyde production, per unit destruction of other volatile organic compounds, by a factor of four, while increasing the removal efficiency of volatile organic compounds by a factor of 1.4. A company with a southern California office is conducting studies in conjunction with Lawrence Berkeley National Laboratory, with the goal of incorporating the ITAC catalytic air cleaning technology in their future commercial products.

  20. Relationship Between Piercing-Sucking Insect Control and Internal Lint and Seed Rot in Southeastern Cotton (Gossypium hirsutum L.).

    Science.gov (United States)

    Medrano, Enrique G; Bell, Alois A; Greene, Jeremy K; Roberts, Phillip M; Bacheler, Jack S; Marois, James J; Wright, David L; Esquivel, Jesus F; Nichols, Robert L; Duke, Sara

    2015-08-01

    In 1999, crop consultants scouting for stink bugs (Hemiptera spp.) in South Carolina discovered a formerly unobserved seed rot of cotton that caused yield losses ranging from 10 to 15% in certain fields. The disease has subsequently been reported in fields throughout the southeastern Cotton Belt. Externally, diseased bolls appeared undamaged; internally, green fruit contain pink to dark brown, damp, deformed lint, and necrotic seeds. In greenhouse experiments, we demonstrated transmission of the opportunistic bacterium Pantoea agglomerans by the southern green stink bug, Nezara viridula (L.). Here, green bolls were sampled from stink bug management plots (insecticide protected or nontreated) from four South Atlantic coast states (North Carolina, South Carolina, Georgia, and Florida) to determine disease incidence in the field and its association with piercing-sucking insects feeding. A logistic regression analysis of the boll damage data revealed that disease was 24 times more likely to occur (P = 0.004) in bolls collected from plots in Florida, where evidence of pest pressure was highest, than in bolls harvested in NC with the lowest detected insect pressure. Fruit from plots treated with insecticide, a treatment which reduced transmission agent numbers, were 4 times less likely to be diseased than bolls from unprotected sites (P = 0.002). Overall, punctured bolls were 125 times more likely to also have disease symptoms than nonpunctured bolls, irrespective of whether or not plots were protected with insecticides (P = 0.0001). Much of the damage to cotton bolls that is commonly attributed to stink bug feeding is likely the resulting effect of vectored pathogens. Published by Oxford University Press on behalf of Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  1. The Name Game.

    Science.gov (United States)

    Crawley, Sharon J.

    Described is a game which provides a method for teaching students to locate cities and towns on a map. Students are provided with a list of descriptive phrases which stand for the name of a city, e.g., hot weather town (Summerville, Georgia); a chocolate candy bar (Hershey, Pennsylvania). Using a map, students must then try to find the name of a…

  2. Directory of awardee names

    Energy Technology Data Exchange (ETDEWEB)

    1999-07-01

    Standardization of grant and contract awardee names has been an area of concern since the development of the Department`s Procurement and Assistance Data System (PADS). A joint effort was begun in 1983 by the Office of Scientific and Technical Information (OSTI) and the Office of Procurement and Assistance Management/Information Systems and Analysis Division to develop a means for providing uniformity of awardee names. As a result of this effort, a method of assigning vendor identification codes to each unique awardee name, division, city, and state combination was developed and is maintained by OSTI. Changes to vendor identification codes or awardee names contained in PADS can be made only by OSTI. Awardee names in the Directory indicate that the awardee has had a prime contract (excluding purchase orders of $10,000 or less) with, or a financial assistance award from, the Department. Award status--active, inactive, or retired--is not shown. The Directory is in alphabetic sequence based on awardee name and reflects the OSTI-assigned vendor identification code to the right of the name. A vendor identification code is assigned to each unique awardee name, division, city, and state (for place of performance). The same vendor identification code is used for awards throughout the Department.

  3. Regenerating using aqueous cleaners with ozone and electrolysis

    Science.gov (United States)

    McGinness, Michael P.

    1994-02-01

    A new process converts organic oil and grease contaminates in used water based cleaners into synthetic surfactants. This permits the continued use of a cleaning solution long after it would have been dumped using previously known methods. Since the organic soils are converted from contaminates to cleaning compounds the need for frequent bath dumps is totally eliminated. When cleaning solutions used in aqueous cleaning systems are exhausted and ready for disposal, they will always contain the contaminates removed from the cleaned parts and drag-in from prior cleaning steps. Even when the cleaner is biodegradable these contaminants will frequently cause the waste cleaning solution to be a hazardous waste. Chlorinated solvents are rapidly being replaced by aqueous cleaners to avoid the new ozone-depletion product-labeling-law. Many industry standard halocarbon based solvents are being completely phased out of production, and their prices have nearly tripled. Waste disposal costs and cradle-to-grave liability are also major concerns for industry today. This new process reduces the amount of water and chemicals needed to maintain the cleaning process. The cost of waste disposal is eliminated because the water and cleaning compounds are reused. Energy savings result by eliminating the need for energy currently used to produce and deliver fresh water and chemicals as well as the energy used to treat and destroy the waste from the existing cleaning processes. This process also allows the cleaning bath to be maintained at the peak performance of a new bath resulting in decreased cycle times and decreased energy consumption needed to clean the parts. This results in a more efficient and cost effective cleaning process.

  4. Transition to an intelligent use of cleaner biomass stoves

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Vicent, Estela D.

    2016-01-01

    are relevant issues to save energy and avoid greenhouse gas (CO2e) emissions. This work compares the operating performance of 3 types of biomass stoves used in Europe in their interaction with dwellings. Field studies were conducted in 24 houses in Portugal and Denmark to analyse wood-burning behaviours......In Europe, inappropriate user behaviours in the operation of wood-burning stoves (WBSs) results in substantial energy losses where fireplaces and conventional stoves are major contributors to undue emissions of health damaging fine particulate matter (PM2.5). The design and adoption of cleaner WBSs...

  5. The Infraordinary as Spatial Discourse: Tongue of the Dry Cleaner

    DEFF Research Database (Denmark)

    Lunde Nielsen, Espen

    2014-01-01

    Most of us pass along kiosks, pubs, dry cleaners, turn street corners, rise up stairways on a daily basis, in a sort of spatial anaesthesia. These spaces that facilitates our everyday existence are ‘worn half-invisible by use’, thereby not given due attention. Through his occupation with the infra...... and people of the neighbourhood coexist through events in real-time and depositions over time. The infra-ordinary as a spatial discourse interrogates and acknowledges the latent qualities of the common and seemingly banal, yet vitally important, spatial materiality of everyday life, as an alternative...

  6. Reactive adsorption: A cleaner technology in nuclear power plants

    International Nuclear Information System (INIS)

    Marton, G.; Szanya, T.; Hanak, L.

    1996-01-01

    Cleaner technology prefers work with minimal loss and the wastes cause the less environmental damages. In the spirit of the previous sentence in the present paper reactive adsorption is investigated for the removal of radioactive nuclides from nuclear power plant decontamination solutions. During alkaline, oxidative decontamination of nuclear power plant equipment a radioactive solution is produced. Owing to the storing difficulties of radioactive solutions it is necessary to develop a method for the in situ treatment of radioactive, alkaline, oxidative decontamination solutions, and for the concentration of radioactive components. Reactive adsorption seems to be promising for this purpose. 3 refs., 8 figs., 1 tab

  7. Measurement of flow inside a vacuum cleaner head

    Science.gov (United States)

    Iguchi, Ryotaro; Ban, Hisataka; Sakakibara, Jun

    2017-11-01

    Vacuum cleaner head with rotating brushes is widely used as a home appliance. Although it efficiently collects dusts from the floor, flow field of the air and motion of the dust inside the head have not been fully investigated. In this study, we performed 3D-PIV (particle tracking velocimetry) measurement of velocity field inside the head. Water was used as working fluid, which allows a use of fluorescent particle to reduce unwanted reflection from the brushes and inner surface of the head. Mean velocity field and turbulence statistics in the head with and without the brush will be presented.

  8. Name agreement in picture naming : An ERP study

    NARCIS (Netherlands)

    Cheng, Xiaorong; Schafer, Graham; Akyürek, Elkan G.

    Name agreement is the extent to which different people agree on a name for a particular picture. Previous studies have found that it takes longer to name low name agreement pictures than high name agreement pictures. To examine the effect of name agreement in the online process of picture naming, we

  9. Applying real options analysis to assess cleaner energy development strategies

    International Nuclear Information System (INIS)

    Cheng, Ching-Tsung; Lo, Shang-Lien; Lin, Tyrone T.

    2011-01-01

    The energy industry, accounts for the largest portion of CO 2 emissions, is facing the issue of compliance with the national clean energy policy. The methodology for evaluating the energy mix policy is crucial because of the characteristics of lead time embedded with the power generation facilities investment and the uncertainty of future electricity demand. In this paper, a modified binomial model based on sequential compound options, which may account for the lead time and uncertainty as a whole is established, and a numerical example on evaluating the optional strategies and the strategic value of the cleaner energy policy is also presented. It is found that the optimal decision at some nodes in the binomial tree is path dependent, which is different from the standard sequential compound option model with lead time or time lag concept. The proposed modified binomial sequential compound real options model can be generalized and extensively applied to solve the general decision problems that deal with the long lead time of many government policies as well as capital intensive investments. - Highlights: → Introducing a flexible strategic management approach for government policy making. → Developing a modified binomial real options model based on sequential compound options. → Proposing an innovative model for managing the long term policy with lead time. → Applying to evaluate the options of various scenarios of cleaner energy strategies.

  10. Design and development of automatic sharia compliant wheelchair wheels cleaner

    Science.gov (United States)

    Shaari, Muhammad Farid; Rasli, Ibrahim Ismail Mohammad; Jamaludin, M. Z. Z. Wan; Isa, W. A. Mohamad; M., H.; Rashid, A. H. Abdul

    2017-04-01

    Sharia compliant wheelchair wheel cleaner was developed in order to assist the muslim Person with Disabilities (PWD) to pray in the mosque without leaving their wheelchair because of the filthy wheels. Though there are many wheelchair wheel cleaning system in the market, it is very rare to find sharia compliant cleaning system that applies sertu concept which is one of the cleaning and purification technique in Islamic practice. The sertu concept is based on 6:1 ratio that refers to the six times pipe water cleaning and one time soiled water cleaning. The development process consists of design stage, fabrication and system installation stage and followed by testing stage. During the design stage, the proposed prototype underwent design brainstorming, operation programming and structural simulation analysis. Once fabricated, the cleaner prototype underwent was tested. The results showed that the prototype can cater load up to 100kg with 1.31×10-6 mm shaft bending displacement. The water ejection timing varied approximately 3% compared to the program.

  11. "Name" that Animal

    Science.gov (United States)

    Laird, Shirley

    2010-01-01

    In this article, the author describes a texture and pattern project. Students started by doing an outline contour drawing of an animal. With the outline drawn, the students then write one of their names to fit "inside" the animal.

  12. Environmental Technology Verification: Supplement to Test/QA Plan for Biological and Aerosol Testing of General Ventilation Air Cleaners; Bioaerosol Inactivation Efficiency by HVAC In-Duct Ultraviolet Light Air Cleaners

    Science.gov (United States)

    The Air Pollution Control Technology Verification Center has selected general ventilation air cleaners as a technology area. The Generic Verification Protocol for Biological and Aerosol Testing of General Ventilation Air Cleaners is on the Environmental Technology Verification we...

  13. A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production. Progress Report 1

    DEFF Research Database (Denmark)

    Wangel, Arne

    This Progress Report presents the initial findings of the research project 'A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production. Progress Report' funded...

  14. Ultra-Stable, New Generation Q-Switched Monolithic Laser Cleaners for Fine Art Conservation

    Science.gov (United States)

    Brioschi, F.; Salvadeo, P.

    The increasing use of laser cleaners in fine art conservation boosts the demand on improvements of the laser performances. More power and more wavelengths are required by the current applications, while laser should be more reliable, rugged and compact. The characteristics and performances of a new generation of laser cleaners are presented as a result of a dedicated research and development program.

  15. Does aerobic exercise improve or impair cardiorespiratory fitness and health among cleaners?

    DEFF Research Database (Denmark)

    Korshøj Larsen, Mette; Lidegaard, Mark; Skotte, Jørgen H

    2015-01-01

    OBJECTIVE: It is unknown if aerobic exercise overloads or improves the cardiovascular system among workers with high occupational physical activity. This was investigated in a worksite randomized controlled trial (RCT) of aerobic exercise among cleaners. METHODS: We randomized 116 cleaners betwee...

  16. TESTING ANTIMICROBIAL CLEANER EFFICACY ON GYPSUM WALLBOARD CONTAMINATED WITH STACHYBOTRYS CHARTARUM

    Science.gov (United States)

    Reducing occupant exposure to indoor mold growth is the goal of this research, through the efficacy testing of antimicrobial cleaners. Often mold contaminated building materials are not properly removed, but instead surface cleaners are applied in an attempt to alleviate the prob...

  17. Associations between psychosocial work environment and hypertension among non-Western immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Olesen, Kasper Vinther; Carneiro, Isabella G; Jørgensen, Marie B

    2012-01-01

    INTRODUCTION: Non-Western cleaners have reported better psychosocial work environment but worse health compared with their Danish colleagues. The aim of this study was to compare the association between psychosocial work environment and hypertension among non-Western immigrant cleaners and Danish...

  18. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Science.gov (United States)

    2010-07-01

    ... of solvents, cleaners, and equipment. 761.378 Section 761.378 Protection of Environment ENVIRONMENTAL...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards and...

  19. Back to Office Report. Mission no.1 to Tanzania as counterpart institution to Cleaner Production Centre of Tanzania

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    A presentation of some important actors and institutions in the capacity building within cleaner production in Tanzania......A presentation of some important actors and institutions in the capacity building within cleaner production in Tanzania...

  20. Participation of Danish and immigrant cleaners in a 1-year worksite intervention preventingphysical deterioration

    DEFF Research Database (Denmark)

    Rasmussen, Charlotte D N; Jørgensen, Marie B; Carneiro, Isabella G

    2012-01-01

    differences in participation among immigrant and Danish cleaners throughout a 1-year randomised controlled study tailored to cleaners and carried out in predominantly female workplaces. No significant differences in ethnicity were found in consent and participation throughout the 1-year intervention. Dropout...... was equally distributed among Danish and immigrant cleaners. This study indicates that a worksite health promotion intervention among a female-dominated, high-risk occupation such as cleaning can be equally appealing for Danes and immigrants. Statement of Relevance: This study provides insight about...... participation of Danish and immigrant cleaners in a worksite health promotion intervention in a predominantly female occupation. For attaining high participation and low dropout in future worksite health promotion interventions among cleaners, the intervention ought to not only target the ethnic background...

  1. Measurement of concentration and size distribution of radon decay products in homes using air cleaners

    International Nuclear Information System (INIS)

    Montassier, N.; Hopke, P.K.; Shi, Y.; McCallum, B.

    1992-01-01

    By removing particles, air cleaners can also eliminate radon decay products. However, by removing the particles, the open-quotes unattachedclose quotes fraction of the radon progeny is increased leading to a higher dose per unit exposure. Thus, both the concentration and size distributions of the radon decay products are needed to evaluate air cleaners. Three types of room air cleaners, NO-RAD Radon Removal System, Electronic Air Cleaner and PUREFLOW Air Treatment System were tested in a single family home in Arnprior, Ontario (Canada). Semi-continuous measurements of radon gas concentration and radon decay product activity weighted size distribution were performed in the kitchen/dining room under real living conditions. The effects of air cleaners on both the concentration and size distribution of the radon decay products were measured, and their impact on the dose of radiation given to the lung tissue were examined

  2. MULTIPATH COMMUNICATIONS USING NAMES

    OpenAIRE

    Purushothama, Rashmi

    2011-01-01

    Increased host mobility, and multi-homing make IP address management very complex in applications. Due to host mobility, the IP address of a host may change dynamically, and also frequently. Multi-homing leads to multiple IP addresses for a single host. Name-based socket is a solution to address the complex IP address management. It relieves the applications from the overhead, and moves it to the operating system. It uses a constant name, instead of an IP address to establish a connection, th...

  3. Radiation technology helps China’s industries make water cleaner

    International Nuclear Information System (INIS)

    Jawerth, Nicole

    2015-01-01

    China is pursuing the use of radiation technology as part of its wastewater treatment methods to further efforts to manage industrial waste in an environmentally friendly way. “Treating the water that comes from our industries is very important, so we have been doing this for a long time. Now we want to become better at making our water cleaner,” said Jianlong Wang, Vice-President of the Institute of Nuclear and New Energy Technology (INET) at Tsinghua University in Beijing. “We are receiving a lot of support from the IAEA to use electron beam based technologies to help us get rid of various water pollutants that the other methods cannot do on their own.”

  4. Ammonium Laurate Surfactant for Cleaner Deposition of Carbon Nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Hanna M. [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Meany, Brendan [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Ticey, Jeremy [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Sun, Chuan-Fu [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Wang, YuHuang [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Cumings, John [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States

    2015-06-15

    Experiments probing the properties of individual carbon nanotubes (CNTs) and those measuring bulk composites show vastly different results. One major issue limiting the results is that the procedures required to separate and test CNTs introduce contamination that changes the properties of the CNT. These contamination residues often come from the resist used in lithographic processing and the surfactant used to suspend and deposit the CNTs, commonly sodium dodecyl sulfate (SDS). Here we present ammonium laurate (AL), a surfactant that has previously not been used for this application, which differs from SDS only by substitution of ionic constituents but shows vastly cleaner depositions. In addition, we show that compared to SDS, AL-suspended CNTs have greater shelf stability and more selective dispersion. These results are verified using transmission electron microscopy, atomic force microscopy, ζ-potential measurements, and Raman and absorption optical spectroscopy. This surfactant is simple to prepare, and the nanotube solutions require minimal sonication and centrifugation in order to outperform SDS.

  5. Cleaner production at pharmaceutical industry: first steps assessment

    Directory of Open Access Journals (Sweden)

    Edilaine Conceição Rezende

    2015-12-01

    Full Text Available The Cleaner Production (CP is an environmental management system effective to comply the environmental obligations and promote sustainable development of enterprises. In this study, the implementing possibilities of CP practices were evaluated to pharmaceutical industry, through prior identification procedures for Pharmaceutical Manufacturing Practices. The study was conducted in a scientific and health care institution, which produces pharmaceutical drugs and makes assistance for public health. The production process was evaluated and made a survey of the main points of waste and sewage generations in each stage, in order to diagnose the measures of CP established and propose new actions. Thus, by using this tool, it was possible to demonstrate the reduction of environmental impacts associated with pharmaceutical production. The Pharmaceutical Manufacturing Practices also contributed to the implementation of measures CP, preserving the final product quality, and generating environmental and economic benefits.

  6. Measuring name system health

    NARCIS (Netherlands)

    Casalicchio, Emiliano; Caselli, Marco; Coletta, Alessio; Di Blasi, Salvatore; Fovino, Igor Nai; Butts, Jonathan; Shenoi, Sujeet

    2012-01-01

    Modern critical infrastructure assets are exposed to security threats arising from their use of IP networks and the Domain Name System (DNS). This paper focuses on the health of DNS. Indeed, due to the increased reliance on the Internet, the degradation of DNS could have significant consequences for

  7. Bacterial and fungal aerosols in the work environment of cleaners

    Directory of Open Access Journals (Sweden)

    Małgorzata Gołofit-Szymczak

    2015-12-01

    Full Text Available Background: Cleaning services are carried out in almost all sectors and branches of industry. Due to the above, cleaners are exposed to various harmful biological agents, depending on the tasks performed and the commercial sector involved. The aim of this study was to assess the exposure of cleaning workers to biological agents based on quantitative and qualitative characteristics of airborne microflora. Material and methods: A six-stage Andersen sampler was used to collect bioaerosols during the cleaning activities in different workplaces, including schools, offices, car services, healthy services and shops. Standard Petri dishes filled with blood trypticase soy agar and malt extract agar were used for bacterial and fungal sampling, respectively. Results: The bioaerosol concentration values obtained during testing of selected workposts of cleaners were lower than the Polish recommended threshold limit values for microorganisms concentrations in public service. The most prevalent bacterial species in studied places were Gram-positive cocci (mainly of genera Micrococcus, Staphylococcus and endospore-forming Gram-positive rods (mainly of genera Bacillus. Among the most common fungal species were those from genera Penicillium and Aspergillus. The size distribution analysis revealed that bioaerosols present in the air of workposts at shops, schools and car services may be responsible for nose and eye mucosa irritation and allergic reactions in the form of asthma or allergic inflammation in the cleaning workers. Conclusions: The study shows that occupational activities of cleaning workers are associated with exposure to airborne biological agents classified into risk groups, 1. and 2., according to their level of infection risk, posing respiratory hazard. Med Pr 2015;66(6:779–791

  8. Evaluation of the efficiency of denture cleaners for removing denture adhesives.

    Science.gov (United States)

    Harada-Hada, Kae; Hong, Guang; Abekura, Hitoshi; Murata, Hiroshi

    2016-12-01

    We developed a new scoring index for assessing the removability of denture adhesives and evaluated the removal efficiency of denture cleaners. Although our understanding of the importance of denture care is increasing, little is known about the effectiveness and efficiency of denture cleaners on denture adhesives. Therefore, guidelines for proper cleaning are necessary. We used five denture cleaner solutions on two cream adhesives, one powder adhesive and one cushion adhesive. After immersion in the denture cleaners for a designated time, we evaluated the area of the sample plate still covered by denture adhesive. Cream adhesives were removed more completely after immersion in majority of the denture cleaners than in water. Powder adhesive was removed more quickly than cream adhesives. Cushion adhesive was not removed by immersion in either the denture cleaners or water control. Some denture cleaners could liquefy cream adhesives more than water, but these differences were not observed in case of powder and cushion adhesives. © 2015 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

  9. Cleaner shrimp use a rocking dance to advertise cleaning service to clients.

    Science.gov (United States)

    Becker, Justine H A; Curtis, Lynda M; Grutter, Alexandra S

    2005-04-26

    Signals transmit information to receivers about sender attributes, increase the fitness of both parties, and are selected for in cooperative interactions between species to reduce conflict [1, 2]. Marine cleaning interactions are known for stereotyped behaviors [3-6] that likely serve as signals. For example, "dancing" and "tactile dancing" in cleaner fish may serve to advertise cleaning services to client fish [7] and manipulate client behavior [8], respectively. Cleaner shrimp clean fish [9], yet are cryptic in comparison to cleaner fish. Signals, therefore, are likely essential for cleaner shrimp to attract clients. Here, we show that the yellow-beaked cleaner shrimp [10] Urocaridella sp. c [11] uses a stereotypical side-to-side movement, or "rocking dance," while approaching potential client fish in the water column. This dance was followed by a cleaning interaction with the client 100% of the time. Hungry cleaner shrimp, which are more willing to clean than satiated ones [12], spent more time rocking and in closer proximity to clients Cephalopholis cyanostigma than satiated ones, and when given a choice, clients preferred hungry, rocking shrimp. The rocking dance therefore influenced client behavior and, thus, appears to function as a signal to advertise the presence of cleaner shrimp to potential clients.

  10. Theriocide: Naming Animal Killing

    Directory of Open Access Journals (Sweden)

    Piers Beirne

    2014-08-01

    Full Text Available In this essay I recommend ‘theriocide’ as the name for those diverse human actions that cause the deaths of animals. Like the killing of one human by another, theriocide may be socially acceptable or unacceptable, legal or illegal. It may be intentional or unintentional and may involve active maltreatment or passive neglect. Theriocide may occur one-on-one, in small groups or in large-scale social institutions. The numerous and sometimes intersecting sites of theriocide include intensive rearing regimes; hunting and fishing; trafficking; vivisection; militarism; pollution; and human-induced climate change. If the killing of animals by humans is as harmful to them as homicide is to humans, then the proper naming of such deaths offers a remedy, however small, to the extensive privileging of human lives over those of other animals. Inevitably, the essay leads to a shocking question: Is theriocide murder?

  11. Names For Free

    DEFF Research Database (Denmark)

    Pouillard, Nicolas; Bernardy, Jean-Philippe

    2013-01-01

    We propose a novel technique to represent names and binders in Haskell. The dynamic (run-time) representation is based on de Bruijn indices, but it features an interface to write and manipulate variables conviently, using Haskell-level lambdas and variables. The key idea is to use rich types...... and manipulation in a natural way, while retaining the good properties of representations based on de Bruijn indices....

  12. What's in a Name?

    Science.gov (United States)

    Bonneau, Joseph; Just, Mike; Matthews, Greg

    We study the efficiency of statistical attacks on human authentication systems relying on personal knowledge questions. We adapt techniques from guessing theory to measure security against a trawling attacker attempting to compromise a large number of strangers' accounts. We then examine a diverse corpus of real-world statistical distributions for likely answer categories such as the names of people, pets, and places and find that personal knowledge questions are significantly less secure than graphical or textual passwords. We also demonstrate that statistics can be used to increase security by proactively shaping the answer distribution to lower the prevalence of common responses.

  13. What's in a name?

    Science.gov (United States)

    Whalley, Mark

    2008-03-01

    During a lesson with my A-level physics class, my school's head of English came into the lab and happened to notice the whiteboard. I had just started teaching a section on particle physics and was acquainting the students with the multitude of names found in the particle world. Among others, the board contained the words lepton, hadron, meson, baryon, photon, gluon, boson, muon, neutrino, fermion and quark. The head of English pointed out that none of the words on the board were intelligible to anyone else in the school. He added that the words themselves were utterly bizarre, although in fairness he did recognize the reference to James Joyce.

  14. Branding a business name

    Directory of Open Access Journals (Sweden)

    Bulatović Ivan

    2016-01-01

    Full Text Available The process of globalization, international businesses, as well as competitive markets imposed the companies (large ones, as well as the others to position in the required market. Making profit, which is the basic aim of every company, in such market environment can only be achieved by demonstrating distinct characteristics of a company, the characteristics which distinguish it from others with the same or similar activities. Historical and analysis of the current market have shown that being recognizable in the multitude of similar companies is a huge challenge, but also one of the main preconditions for successful operations. The moment a company is registered it acquires a specific identity primarily owing to its business name, which distinguishes it from other companies during that first period. Practically at the same time, the company starts creating its image or goodwill by means of several distinctive ways. One of them is branding business name or corporate branding. However, apart from large benefits, companies may also have big difficulties and risks in the same process as well.

  15. IMPACT OF COSOLVENT FLUSHING ON SUBSURFACE MICROBIAL ECOLOGY AT THE FORMER SAGE'S DRY CLEANER SITE

    Science.gov (United States)

    The Solvent Extraction Residual Biotreatment (SERB) technology was evaluated at the former Sage's Dry Cleaner site in Jacksonville, FL where an area of tetrachloroethylene (PCE) contamination was identified. The SERB technology is a treatment train approach to complete site rest...

  16. Self-Compensation of Astigmatism in Mode-Cleaners for Advanced Interferometers

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, P; Zhao Chunnong; Ju Li; Blair, David G [School of Physics, University of Western Australia, Crawley, WA6009 (Australia)

    2006-03-02

    Using a conventional mode-cleaner with the output beam taken through a diagonal mirror it is impossible to achieve a non-astigmatic output. The geometrical astigmatism of triangular mode-cleaners for gravitational wave detectors can be self-compensated by thermally induced astigmatism in the mirrors substrates. We present results from finite element modelling of the temperature distribution of the suspended mode-cleaner mirrors and the associated beam profiles. We use these results to demonstrate and present a self-compensated mode-cleaner design. We show that the total astigmatism of the output beam can be reduced to 5x10{sup -3} for {+-}10% variation of input power about a nominal value when using the end mirror of the cavity as output coupler.

  17. Cleaner Production Practices, Environmental Management and National Policy Development in Malaysia for Electroplating Enterprises

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2004-01-01

    -operation for Environment and Development (DANCED), Ministry of Environment and Energy. SMEs were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen, presenting...... figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention towards...... sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project 'A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production'....

  18. The importance of integrated system design for the effectiveness of portable air cleaners in airborne infection

    CSIR Research Space (South Africa)

    Van Reenen, T

    2013-12-01

    Full Text Available The results of the recent study into the effectiveness of portable air cleaners (PACs), as an infection control measure against TB, delivered unexpectedly low results. That finding initiated a further study to understand the contribution of system...

  19. Increased participation among cleaners as a strategy to improve quality and occupational health

    OpenAIRE

    Öhrling, Therese

    2014-01-01

    Like many other industries, today the cleaning industry is affected more than ever by competition and pressure toward low prices, which leads to a nonadvantageous situation for cleaners. These days many Swedish municipalities choose to outsource cleaning service in order to save money, although the situation for the cleaners appears to be worsening. The aim of this paper is to evaluate an alternative organizational structure within a Swedish public cleaning division to investigate how good wo...

  20. Quality care means valuing care assistants, porters, and cleaners too.

    Science.gov (United States)

    Toynbee, P

    2003-12-01

    All too often, the focus of the very clever strategy papers produced in the upper reaches of the health department is on the next grand plan. Some of these reforms have been catastrophic for the quality of service that patients experience at ward level. Of these, the contracting out culture introduced in the 1980s and the 1990s has been the worst. Researching my book, Hard work-life in low pay Britain, I took six jobs at around the minimum wage, including work as a hospital porter, as a hospital cleaner, and as a care assistant. These are jobs at the sharp end, up close and very personal to the patients, strongly influencing their experiences of the services they were using. Yet they are low paid, undervalued jobs that fall below the radar of the policy makers. In hospitals they need to be brought back in-house and integrated into a team ethos. Paying these people more would cost more, but it would also harvest great rewards by using their untapped commitment.

  1. Reputation management promotes strategic adjustment of service quality in cleaner wrasse.

    Science.gov (United States)

    Binning, Sandra A; Rey, Olivia; Wismer, Sharon; Triki, Zegni; Glauser, Gaétan; Soares, Marta C; Bshary, Redouan

    2017-08-21

    Adjusting one's behaviour in response to eavesdropping bystanders is considered a sophisticated social strategy, yet the underlying mechanisms are not well studied. Cleaner wrasse, Labroides dimidiatus, cooperate by eating ectoparasites off "client" fishes, or cheat (i.e. bite) and eat client mucus. Image scoring by bystander clients generally causes cleaners from socially-complex (i.e. high cleaner and client abundance; high client species richness) habitats to increase levels of cooperation. However, some individuals may periodically provide tactile stimulation to small resident clients, which attract bystanders close that are bitten, a form of tactical deception. Cortisol injection can reproduce this pattern. Here, we tested whether cleaners from socially-complex versus simple habitats respond differently to cortisol injections in terms of their cleaning interactions with clients. We found that only cleaners from the socially-complex habitat respond to cortisol injection with strategies functioning as tactical deception: i.e. increased tactile stimulation to small clients and increased cheating of large clients relative to small ones. At the socially-simple site, where reputation management is less important, cortisol-treated fish increased their overall levels of cheating, especially of small clients. Thus, strategic adjustments to cooperative behaviour and tactical deception are likely context-dependent, forming part of general reputation management abilities in cleaner wrasse.

  2. Named Entity Linking Algorithm

    Directory of Open Access Journals (Sweden)

    M. F. Panteleev

    2017-01-01

    Full Text Available In the tasks of processing text in natural language, Named Entity Linking (NEL represents the task to define and link some entity, which is found in the text, with some entity in the knowledge base (for example, Dbpedia. Currently, there is a diversity of approaches to solve this problem, but two main classes can be identified: graph-based approaches and machine learning-based ones. Graph and Machine Learning approaches-based algorithm is proposed accordingly to the stated assumptions about the interrelations of named entities in a sentence and in general.In the case of graph-based approaches, it is necessary to solve the problem of identifying an optimal set of the related entities according to some metric that characterizes the distance between these entities in a graph built on some knowledge base. Due to limitations in processing power, to solve this task directly is impossible. Therefore, its modification is proposed. Based on the algorithms of machine learning, an independent solution cannot be built due to small volumes of training datasets relevant to NEL task. However, their use can contribute to improving the quality of the algorithm. The adaptation of the Latent Dirichlet Allocation model is proposed in order to obtain a measure of the compatibility of attributes of various entities encountered in one context.The efficiency of the proposed algorithm was experimentally tested. A test dataset was independently generated. On its basis the performance of the model was compared using the proposed algorithm with the open source product DBpedia Spotlight, which solves the NEL problem.The mockup, based on the proposed algorithm, showed a low speed as compared to DBpedia Spotlight. However, the fact that it has shown higher accuracy, stipulates the prospects for work in this direction.The main directions of development were proposed in order to increase the accuracy of the system and its productivity.

  3. Socioeconomic determinants of first names

    NARCIS (Netherlands)

    Bloothooft, G.; Onland, D.

    2011-01-01

    Modern naming practices in the Netherlands between 1982 and 2005 were studied on the basis of 1409 popular first names, divided into fourteen name groups determined by the common preferences of parents for the names involved. Socioeconomic variables such as family income, parents' level of

  4. Dictionary of Alaska place names

    Science.gov (United States)

    Orth, Donald J.

    1971-01-01

    This work is an alphabetical list of the geographic names that are now applied and have been applied to places and features of the Alaska landscape. Principal names, compiled from modem maps and charts and printed in boldface type, generally reflect present-day local usage. They conform to the principles of the U.S. Board on Geographic Names for establishing standard names for use on Government maps and in other Government publications. Each name entry gives the present-day spelling along with variant spellings and names; identifies the feature named; presents the origin and history of the name; and, where possible, gives the meaning of an Eskimo, Aleut, Indian, or foreign name. Variant, obsolete, and doubtful names are alphabetically listed and are cross referenced, where necessary, to the principal entries.

  5. History of NAMES Conferences

    Science.gov (United States)

    Filippov, Lev

    2013-03-01

    Franco-Russian NAMES Seminars are held for the purpose of reviewing and discussing actual developments in the field of materials science by researchers from Russia and from the Lorraine Region of France. In more precise terms, as set down by the organizers of the seminar (the Moscow Institute of Steel and Alloys and the Institut National Polytechnique de Lorraine), the mission of the seminars is as follows: the development of scientific and academic contacts, giving a new impulse to joint fundamental research and technology transfer the development and consolidation of scientific, technical and business collaboration between the regions of Russia and Lorraine through direct contact between the universities, institutes and companies involved The first Seminar took place on 27-29 October 2004, at the Institut National Polytechnique de Lorraine (on the premises of the Ecole Européenne d'Ingénieurs en Génie des Matériaux, Nancy, France). The number, variety and quality of the oral presentations given and posters exhibited at the first Seminar were of high international standard. 30 oral presentations were given and 72 posters were presented by 19 participants from five universities and three institutes of the Russian Academy of Sciences participants from 11 laboratories of three universities from the Lorraine region three industrial companies, including the European Aeronautic Defence and Space Company—EADS, and ANVAR (Agence Nationale de Valorisation de la Recherche) From 2005 onwards, it was decided to organize the Seminar every other year. The second Seminar convened on the occasion of the 75th Anniversary of the Moscow Institute of Steel and Alloys on 10-12 November 2005 in Moscow, Russia. The seminar demonstrated the efficiency of the scientific partnership founded between the research groups of Russia and France during the first Seminar. High productivity of the Franco-Russian scientific cooperation on the basis of the Research-Educational Franco

  6. Nuclear criticality safety calculations for a K-25 site vacuum cleaner

    International Nuclear Information System (INIS)

    Shor, J.T.; Haire, M.J.

    1997-02-01

    A modified Nilfisk model GSJ dry vacuum cleaner is used throughout the K-25 Site to collect dry forms of highly enriched uranium (HEU). When vacuuming, solids are collected in a cyclone-type separator vacuum cleaner body. Calculations were done with the SCALE (KENO V.a) computer code to establish conditions at which a nuclear criticality event might occur if the vacuum cleaner was filled with fissile solution. Conditions evaluated included full (12-in. water) reflection and nominal (1-in. water) reflection, and full (100%) and 20% 235 U enrichment. Validation analyses of SCALE/KENO and the SCALE 27-group cross sections for nuclear criticality safety applications indicate that a calculated k eff + 2σ eff + 2σ ≥ 0.9605 is considered unsafe and may be critical. Critical conditions were calculated to be 70 g U/L for 100% 235 U and full 12-in. water reflection. This corresponds to a minimum critical mass of approximately 1,400 g 235 U for the approximate 20.0-L volume of the vacuum cleaner. The actual volume of the vacuum cleaner is smaller than the modeled volume because some internal materials of construction were assumed to be fissile solution. The model was an overestimate, for conservatism, of fissile solution occupancy. At nominal reflection conditions, the critical concentration in a vacuum cleaner full of UO 2 F 2 solution was calculated to be 100 g 235 U/L, or 2,000 g mass of 100% 235 U. At 20% 235 U for the 20.0-L volume of the vacuum cleaner. At 15% 235 U enrichment and full reflection, critical conditions were not reached at any possible concentration of uranium as a uranyl fluoride solution. At 17.5% 235 U enrichment, criticality was reached at approximately 1,300 g U/L which is beyond saturation at 25 C

  7. Screening for Common Mental Disorders and Substance Abuse among Temporary Hired Cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate

    OpenAIRE

    RA Abbas; RAM Hammam; SS El-Gohary; LME Sabik; MS Hunter

    2012-01-01

    Background: Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. Objectives: To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. Methods: A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egyp...

  8. A 24-h assessment of physical activity and cardio-respiratory fitness among female hospital cleaners

    DEFF Research Database (Denmark)

    Larsen, Mette Korshøj; Krustrup, Peter; Jespersen, Tobias

    2013-01-01

    measured. The methods were feasible for the objective 24-h sampling of physical activity and cardio-respiratory fitness among cleaners. Measurements showed that the cleaners walked 20,198 ± 4,627 steps per day. During working hours, the average cardio-respiratory load was 25 ± 6% of heart rate reserve (HRR......). The cleaners had a low estimated cardio-respiratory fitness (34 mlO2/kg/min), a high BMI (50%, >25 kg/m(2)) and blood pressure (50%, >120/>80 mmHg). The high amount of steps, the relatively high cardiovascular load at work and low cardio-respiratory fitness illustrate the need for further investigation...... of the relationship between physical activity at work and in leisure, and cardiovascular health in this population. Practitioner Summary: This study evaluated the feasibility of methods for objective 24-h sampling of physical activity among cleaners; the methods used were found to be feasible. The cleaners had a high...

  9. Can You Say My Name?

    DEFF Research Database (Denmark)

    Erz, Antonia; Christensen, Bo T.

    Whereas brand name research has focused on the semantic meaning or sounds of names, processing fluency lends further support to the idea that meaning goes beyond semantics. Extant research has shown that phonological fluency, i.e., the ease or difficulty with which people pronounce names, can...

  10. A family of names : rune-names and ogam-names and their relation to alphabet letter-names

    NARCIS (Netherlands)

    Griffiths, Alan

    2013-01-01

    The current consensus is that vernacular names assigned to the runes of the Germanic fuþark and to Irish ogam characters are indigenous creations independent of Mediterranean alphabet traditions. I propose, however, that ogam-names are based on interpretations of Hebrew, Greek or Latin letter-names

  11. Laser cleaner development for decontamination of the primary water cooling system at nuclear power plants

    International Nuclear Information System (INIS)

    Minehara, Eisuke

    2010-01-01

    We recently have performed the feasibility studies to develop laser cleaners utilizing several laser oscillator and amplifier systems like femto-second free-electron lasers, water-jet guided lasers, Q-switched YAG lasers, fiber lasers. Whenever we used to clean the RI-contaminated surface using the lasers, we should focus enough laser power in the surface to evaporate instantly without melting. Therefore, as the contaminated being deeply located into the surface could be removed using any one set of the lasers, we found that every trial of laser cleaning could remove very well the RI contamination being located deeply. Our cold decontamination test using a model sample being Cobalt plated successfully has been performed to show a very high decontamination factor. In order to develop an usable laser cleaner, we plan to develop the prototype laser cleaner next year. (author)

  12. A Case Study of Air Cleaner by the Intelligent Interaction and Emotion

    Science.gov (United States)

    Cao, Huai; Sun, Yuwen

    2018-02-01

    The pure and fresh air can not only contribute to our physical and mental health, but also can be beneficial to ease the pressure and relax the mood. The vertical intelligent air cleaner can remove the harmful gases from the air and absorb the suspended particles in the air, especially all kinds of the bacteria and viruses. The air cleaner is good for improving the air quality of the indoor and maintaining the health of the people. The designing of the vertical air cleaner is as follows: The designing of the vertical intelligent make full use of the developed air purification technology. The smart home is inserted into the work. Simultaneously, in the aspect of the design of intelligent products, the intelligent interactive processes are scientifically planned. Moreover, the emotional design and the user experience are fully considered, which can enhance the comprehensive design ability.

  13. What characterizes cleaners sustaining good musculoskeletal health after years with physically heavy work?

    DEFF Research Database (Denmark)

    Holtermann, A; Blangsted, A K; Christensen, H

    2009-01-01

    OBJECTIVES: The aim of this case-control study was to investigate characteristics of cleaners with good musculoskeletal health after years with physically heavy work. METHODS: One hundred and 41 female seniority cleaners participated. Twenty-five reported no musculoskeletal symptoms, whereas 83...... reported severe symptoms in the low back, neck shoulders or upper limbs. The groups were of matching age, height, body weight and seniority (19 years). Muscular strength was recorded by isometric maximal voluntary contractions on a day without pain. Exposure to physical risk factors at work, psychosocial...... work factors, and leisure time physical activity were assessed by a postal questionnaire. RESULTS: Cleaners with good musculoskeletal health were not reporting different exposure to physical risk factors at work or leisure time physical activity, but had higher muscular strength and reported higher...

  14. Pressure pain sensitivity maps, self-reported musculoskeletal disorders and sickness absence among cleaners

    DEFF Research Database (Denmark)

    Binderup, Asbjørn Thalund; Holtermann, Andreas; Søgaard, Karen

    2011-01-01

    back regions (27 points). LTSA was defined as ten or more consecutive workdays with sick leave. RESULTS: The PPT maps revealed the spatial heterogeneity in mechanical sensitivity among cleaners. The level of pain in the neck and dominant shoulder and upper back within the last 7 days correlated......BACKGROUND: Pressure pain threshold mapping is a valuable method for the identification of distinct zones of mechanical pain sensitivity. Such approach was applied for the first time in relation to self-reported musculoskeletal disorders and long-term sickness absence (LTSA) within the last 12...... months among cleaners. METHODS: About 29 cleaners filled out a self-administered questionnaire regarding health, work-related measures and musculoskeletal disorders. Subsequently, PPTs were measured at (1) tibialis anterior (control location, 1 point), (2) the neck-shoulder (48 points) and (3) the low...

  15. GEOGRAPHIC NAMES INFORMATION SYSTEM (GNIS) ...

    Science.gov (United States)

    The Geographic Names Information System (GNIS), developed by the U.S. Geological Survey in cooperation with the U.S. Board on Geographic Names (BGN), contains information about physical and cultural geographic features in the United States and associated areas, both current and historical, but not including roads and highways. The database also contains geographic names in Antarctica. The database holds the Federally recognized name of each feature and defines the location of the feature by state, county, USGS topographic map, and geographic coordinates. Other feature attributes include names or spellings other than the official name, feature designations, feature class, historical and descriptive information, and for some categories of features the geometric boundaries. The database assigns a unique feature identifier, a random number, that is a key for accessing, integrating, or reconciling GNIS data with other data sets. The GNIS is our Nation's official repository of domestic geographic feature names information.

  16. Evaluation of heat stress in dry cleaner units:A case study in Qom, Iran

    Directory of Open Access Journals (Sweden)

    Javad Malakouti

    2016-04-01

    Full Text Available Background & Aims of the Study: Nowadays, heat stress is one of the most harmful physical agents in workplaces. According to the consequences of heat stress and have no information about it in Qom dry cleaner units, Iran, this study have been designed to evaluate the heat stress among workers of dry cleaner units in Qom province of Iran, in Jul-Aug 2011. Materials & Methods: This cross-sectional study was conducted in 113 units of active dry cleaner units. WBGT (Wet Bulb Globe Temperature index was selected for heat stress evaluation. In order to measure the requisite parameters, WBGT meter made of Casella Company had been used according to ISO 7243. Data had been analyzed according to Occupational Exposure Limits (OELs with SPSS V.16, using analysis of variance, independent T and LSD tests. Results: The average of WBGT index in Qom dry cleaner units of Iran were 28.98±1.64 °C. The average of WBGT index in 66.4% of units was up to 28°C. The average of relative humidity was 42.86%, the average of wet bulb temperature and globe temperature were 25.56°C and 36.72°C, respectively. The findings showed a significant correlation between the average of WBGT index and the standard recommendation level (p<0.0001. In dry cleaner units with less than 10 m2 area, heat stress was higher than other units  significantly (p<0.05. Conclusions: Heat stress in many dry cleaner units in Qom, Iran, was more than recommended OELs. Because of wet bulb and globe temperature in units were high value, the most important measures to heat controls, are technical engineering controls such as  radiation shield, insulation on boilers and modify the cooling systems.

  17. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation.

    Science.gov (United States)

    Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-07-15

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%-44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%-109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (impacts would be 2%-21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%-20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should be broadened to reduce the impacts from raw materials, production and end

  18. Increased Participation Among Cleaners as a Strategy to Improve Quality and Occupational Health

    Directory of Open Access Journals (Sweden)

    Therese Öhrling

    2014-09-01

    Full Text Available Like many other industries, today the cleaning industry is affected more than ever by competition and pressure toward low prices, which leads to a nonadvantageous situation for cleaners. These days many Swedish municipalities choose to outsource cleaning service in order to save money, although the situation for the cleaners appears to be worsening. The aim of this paper is to evaluate an alternative organizational structure within a Swedish public cleaning division to investigate how good work environment for cleaners can be combined with economical savings for a municipality. Like many other cleaning organizations, both national and international, the present cleaning division has been struggling for a long time with high levels of sick leave and early retirements. After years of unsuccessful attempts to improve the situation by reducing the physical load, cleaning managers made a decision to broaden their strategy by changing the structure of their organization. In this study, both qualitative and quantitative methods have been applied to identify and understand the effects of the organizational change, both on an individual level and on an organizational level. The results show that the organizational change, which leads to increased participation and autonomy for the cleaners, in combination with a high degree of social support, had a positive effect on job satisfaction, work motivation, and pride among the cleaners. Sick leave within the division has decreased, and both the quality and efficiency of the cleaning service have increased. It can be concluded that there are other alternative organizational structures that could be applied within the public sector and prove advantageous, both for the individual cleaners and for the municipality. Further research of similar organizational structures within the private cleaning sector is recommended.

  19. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

    Energy Technology Data Exchange (ETDEWEB)

    Gallego-Schmid, Alejandro, E-mail: alejandro.gallegoschmid@manchester.ac.uk; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-07-15

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

  20. Evaluation of cleaner production options in dyeing and printing industry: Using combination weighting method

    Science.gov (United States)

    Kang, Hong; Zhang, Yun; Hou, Haochen; Sun, Xiaoyang; Qin, Chenglu

    2018-03-01

    The textile industry has a high environmental impact so that implementing cleaner production audit is an effective way to achieve energy conservation and emissions reduction. But the evaluation method in current cleaner production audit divided the evaluation of CPOs into two parts: environment and economy. The evaluation index system was constructed from three criteria of environment benefits, economy benefits and product performance; weights of five indicators were determined by combination weights of entropy method and factor weight sorting method. Then efficiencies were evaluated comprehensively. The results showed that the best alkali recovery option was the nanofiltration membrane method (S=0.80).

  1. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

    International Nuclear Information System (INIS)

    Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-01-01

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

  2. The Urban Function of the Infraordinary: Dry Cleaners as Social Vertexes

    DEFF Research Database (Denmark)

    Lunde Nielsen, Espen

    2015-01-01

    of social coexistence that has ‘a function that is separate from their practical use’ (Jorn 1954). A London dry cleaner serves as testing ground, employing critical spatial practices and creative writing as research tools. The dry cleaner does not simply clean clothes, but is a social vertex and physical...... interface through which (non-)events unfold, trajectories thickens and people of the neighbourhood coexists as familiar strangers (Milgram 2010; Paulos and Goodman 2004) through events in real-time and deposits over time. It is a semi-public space and an implosion of the external neighbourhood, partly...

  3. The association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark

    DEFF Research Database (Denmark)

    Carneiro, Isabella G.; Rasmussen, Charlotte D. N.; Jørgensen, Marie B.

    2013-01-01

    PURPOSE: The aim of the study is to investigate the association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark. METHODS: This study is based on a cross-sectional analysis of baseline data from 2007 to 2008. The study population includes 276 cleaners...

  4. Early retirement among Danish female cleaners and shop assistants according to work environment characteristics and upper extremity complaints

    DEFF Research Database (Denmark)

    Jensen, Lone Donbæk; Bonde, Jens Peter Ellekilde; Christensen, Michael Victor

    2016-01-01

    -year cohort study with registry-based follow-up of 1430 female cleaners and 579 shop assistants. In subsequent analyses of female cleaners, disability pension and voluntary early retirement were modeled according to work characteristics and upper extremity complaints. RESULTS: The adjusted hazard rate...

  5. GAS-PHASE AND PARTICULATE EMISSIONS DURING APPLICATION OF A WATER-BASED CLEANER WITH A HAND-PUMP SPRAYER

    Science.gov (United States)

    The paper gives results of tests in a controlled environment test room to measure concentrations of 2-butoxyethanol and particles during application of a cleaner to realistic surfaces (counter tops, glass, walls). (NOTE: Users of water-based cleaners applied with hand-pump spray...

  6. Screening for common mental disorders and substance abuse among temporary hired cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate.

    Science.gov (United States)

    Abbas, R A; Hammam, R A M; El-Gohary, S S; Sabik, L M E; Hunter, M S

    2013-01-01

    Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egypt. All participants were invited to complete a structured questionnaire through a semi-structured interview which included the self-reporting questionnaire 20 items (SRQ-20) and the work stress scale. Assessment of drug use included urine-based screening tests for common substances abused. The prevalence of job stress, common mental disorders and substance abuse, particularly tramadol and cannabis (Bango), was significantly higher in the studied temporary cleaners compared to permanent cleaners. Risk factors associated with increased susceptibility of the temporary cleaners to common mental disorders were family history of substance abuse, high crowding index, history of physical illness, low educational level, and smoking; while being unmarried, male sex, family history of mental disorder, age ≥40 years, smoking, and length of service ≥8 years, were associated with substance abuse among the same group. Temporary hired hospital cleaners suffered from impaired mental health more than permanent cleaners. Therefore, expanding the coverage of current laws and occupational safety and health standards to cover workers in the informal sector especially in developing countries is recommended.

  7. Screening for Common Mental Disorders and Substance Abuse among Temporary Hired Cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate

    Directory of Open Access Journals (Sweden)

    RA Abbas

    2012-12-01

    Full Text Available Background: Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. Objectives: To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. Methods: A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egypt. All participants were invited to complete a structured questionnaire through a semi-structured interview which included the self-reporting questionnaire 20 items (SRQ-20 and the work stress scale. Assessment of drug use included urine-based screening tests for common substances abused. Results: The prevalence of job stress, common mental disorders and substance abuse, particularly tramadol and cannabis (Bango, was significantly higher in the studied temporary cleaners compared to permanent cleaners. Risk factors associated with increased susceptibility of the temporary cleaners to common mental disorders were family history of substance abuse, high crowding index, history of physical illness, low educational level, and smoking; while being unmarried, male sex, family history of mental disorder, age ≥40 years, smoking, and length of service ≥8 years, were associated with substance abuse among the same group. Conclusion: Temporary hired hospital cleaners suffered from impaired mental health more than permanent cleaners. Therefore, expanding the coverage of current laws and occupational safety and health standards to cover workers in the informal sector especially in developing countries is recommended.

  8. The catalogCleaner: Separating the Sheep from the Goats

    Science.gov (United States)

    O'Brien, K.; Hankin, S. C.; Schweitzer, R.; Koyuk, H.

    2012-12-01

    possible. However, it quickly became obvious, through the sheer volume of data servers available, that the manual process of building a master catalog was not scalable. Thus, the idea for the catalogCleaner tool was born. The goal of this tool is to automatically crawl a remote OPeNDAP or THREDDS server, and from the information in the server build a "clean" catalog of data that will be: a) served through uniform access services; b) have CF compliant metadata; c) directly link the data to common visualization tools thereby allowing users to immediately begin exploring actual data. In addition, the UAF-generated clean catalog can then be used to drive data discovery tools such as Geoportal, GI-CAT, etc. This presentation will further explore the motivation of creating this tool, the implementation of this tool, as well as the myriad of challenges and difficulties there were encountered along the way.

  9. A new cleaner process to prepare pressing-powder

    Directory of Open Access Journals (Sweden)

    Shu, Z.

    2011-10-01

    Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.

    En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

  10. Names of Southern African grasses: Name changes and additional ...

    African Journals Online (AJOL)

    The main reasons for changes in botanical names are briefly reviewed, with examples from the lists. At this time, about 1040 grass species and subspecific taxa are recognized in the subcontinent. Keywords: botanical research; botanical research institute; botany; grass; grasses; identification; name change; nomenclature; ...

  11. Cognitive components of picture naming.

    Science.gov (United States)

    Johnson, C J; Paivio, A; Clark, J M

    1996-07-01

    A substantial research literature documents the effects of diverse item attributes, task conditions, and participant characteristics on the case of picture naming. The authors review what the research has revealed about 3 generally accepted stages of naming a pictured object: object identification, name activation, and response generation. They also show that dual coding theory gives a coherent and plausible account of these findings without positing amodal conceptual representations, and they identify issues and methods that may further advance the understanding of picture naming and related cognitive tasks.

  12. Fictional names and fictional discourse

    OpenAIRE

    Panizza, Chiara

    2017-01-01

    [eng] In this dissertation I present a critical study of fiction, focusing on the semantics of fictional names and fictional discourse. I am concerned with the issue of whether fictional names need to refer, and also with the related issue of whether fictional characters need to exist, in order to best account for our linguistic practices involving fictional names. Fictional names like ‘Sherlock Holmes’, ‘Anna Karenina’, ‘Emma Woodhouse’ and ‘Don Quixote of La Mancha’ ordinarily occur in diff...

  13. Internationalisierung des Lehramts – eine Quadratur des Kreises? Zu Chancen und Grenzen eines grenzüberschreitenden Paradigmas der Lehrerbildung am Beispiel des Masterstudiengangs MEEF / LINT (Lehramt International Nizza-Regensburg

    Directory of Open Access Journals (Sweden)

    Jochen Mecke

    2016-03-01

    Full Text Available Die Internationalisierung ist nicht das Problem, sie ist die Lösung: In einer europäischen Gesellschaft, in der die Dynamik einer neuen Vielfalt derzeit eine der wenigen Konstanten darstellt, die nationenübergreifend Bestand hat und keine Grenzen kennt, brauchen wir eine Lehrerbildung, die strukturell und konzeptionell so gesamteuropäisch angelegt ist wie ihre Herausforderungen. Wir brauchen trotz und wegen verschiedener bildungspolitischer Unterschiede und Hürden neue Ansätze der Kooperation und Vernetzung, deren Chancen und Herausforderungen in der Folge exemplarisch am binationalen Master of Education MEEF / LINT (Lehramt International Deutsch-Französisch skizziert werden sollen.

  14. Visibility and social recognition as psychosocial work environment factors among cleaners in a multi-ethnic workplace intervention.

    Science.gov (United States)

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2012-12-24

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants' low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called "Make a Difference" designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom's "readiness for cleaning", and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners' psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners' experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered.

  15. Third quarterly report and final report within the counterpart subcontract no. 97/219: Support to the National Cleaner Production Centre, Tanzania

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1999-01-01

    The report analyses barriers and incentivres to cleaner production in Tanznaia based on experiences in three demonstration projects with around 25 companies.An outline for a policy study on cleaner production in Tanzania and for the strengthening of cleaner production in Tanzania is given....

  16. Control of respirable particles and radon progeny with portable air cleaners

    International Nuclear Information System (INIS)

    Offermann, F.J.; Sextro, R.G.; Fisk, W.J.; Nazaroff, W.W.; Nero, A.V.; Revzan, K.L.; Yater, J.

    1984-02-01

    Eleven portable air cleaning devices have been evaluated for control of indoor concentrations of respirable particles and radon progeny. Following injection of cigarette smoke and radon in a room-size chamber, decay rates for particles and radon progeny concentrations were measured with and without air cleaner operation. Particle concentrations were obtained for total number concentration and for number concentration by particle size. In tests with no air cleaner the natural decay rate for cigarette smoke was observed to be 0.2 hr -1 . Air cleaning rates for particles were found to be negligible for several small panel-filters, a residential ion-generator, and a pair of mixing fans. The electrostatic precipitators and extended surface filters tested had significant particle removal rates, and a HEPA-type filter was the most efficient air cleaner. The evaluation of radon progeny control produced similar results; the air cleaners which were effective in removing particles were also effective in removing radon progeny. At low particle concentrations plateout of the unattached radon progeny is an important removal mechanism. Based on data from these tests, the plateout rate for unattached progeny was found to be 15 hr -1 . The unattached fraction and the overall removal rate due to deposition of attached and unattached nuclides have been estimated for each radon decay product as a function of particle concentration. While air cleaning can be effective in reducing total radon progeny, concentrations of unattached radon progeny can increase with increasing air cleaning. 39 references, 26 figures, 9 tables

  17. Too tired for exercise? The work and leisure of female cleaners in Denmark

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2017-01-01

    on the relevant literature on women’s work–life balance and (migrant) women’s participation in LTPA, we approached their work and leisure from an intersectionality perspective and explored if and how female cleaners engaged in LTPA and which constraints impeded their involvement. The interviewees’ narratives...

  18. Short-term respiratory effects of cleaning exposures in female domestic cleaners.

    Science.gov (United States)

    Medina-Ramón, M; Zock, J P; Kogevinas, M; Sunyer, J; Basagaña, X; Schwartz, J; Burge, P S; Moore, V; Antó, J M

    2006-06-01

    Symptoms of obstructive lung disease in domestic cleaners have been related to the use of bleach and other irritant cleaning products. The short-term effects of cleaning exposures on respiratory symptoms and peak expiratory flow (PEF) were investigated in domestic cleaners with respiratory disorders. In a panel study, 43 female domestic cleaners with a recent history of asthma and/or chronic bronchitis completed a 2-week diary, collecting information on respiratory symptoms, PEF and cleaning exposures. Mixed regression models were used to assess daily changes in symptoms and PEF associated with specific cleaning exposures. The probability of having work-related asthma was individually assessed by a computerised diagnostic system and an occupational asthma expert. Lower respiratory tract symptoms were more common on working days and were predominantly associated with exposure to diluted bleach, degreasing sprays/atomisers and air fresheners. Associations with upper respiratory tract symptoms and PEF were less apparent. Eleven (30%) subjects scored positively for work-related asthma. It is concluded that exposure to certain irritant cleaning products aggravates lower respiratory tract symptoms in female domestic cleaners with asthma or chronic bronchitis.

  19. Lipophilic Super-Absorbent Swelling Gels as Cleaners for Use on Weapons Systems and Platforms

    Science.gov (United States)

    2014-02-01

    Tetrahydrofuran (THF), isopropa- nol, acetonitrile, and dichloromethane were obtained from Acros Organics (Morris Plains, NJ). Dimethylsulfoxide ( DMSO ) and 1...1. In the following solvents , swelling degree did not change in both heating and cooling processes: water, DMSO , methanol, ethanol, isopropanol...available alkylstyrene copolymer (imbiber beads). The cleaning ability of the gels was compared with the standard solvent cleaner trichloroethylene

  20. TNO moving forward ... to a safer, cleaner and more efficient mobility

    NARCIS (Netherlands)

    Bleijenberg, A.N.

    2008-01-01

    This book provides an impression of how we are contributing to cleaner, safer and more efficient mobility in Europe, helping our customers from concept to implementation and from engineering solutions to strategic advice. Our knowledge is derived to a significant extent from European research

  1. Implementing Cleaner Production as an Environmental Management Efforts in Small Industries of Cassava Chips

    Directory of Open Access Journals (Sweden)

    Rahmadyanti Erina

    2016-01-01

    Full Text Available Small and Medium Enterprises (SMEs is one of the major driving factors for Indonesian economy, especially in food processing industries. The cassava-based industry is one type of food and beverage industry with chips as its major product. The limitations of knowledge caused their activities to only aim at pursuing economic benefits and ignoring the environmental balance. The most appropriate preventive method used, according to the characteristics of SMEs in Indonesia, is Cleaner Production. This study aims to reduce the risk of environmental pollution caused by the waste production of small chips industries by implementing cleaner production. The method used in this study is quick scanning by analyzing mass balance, energy, and utilities that aim to find an inefficient process to minimize losses. Implementation of cleaner production may include good housekeeping, reducing, and reusing. Based on the assessment of alternative eligibility criteria, the equipment modifications are the main factor in implementing cleaner production that drives the profits by providing efficiency of cutting as much as 80 percent and optimizes the profits into 57.62 kg in a month or 691.44 kg in a year. If the price of cassava chips is IDR 40,000 in a kg, then it would save IDR 27,657,600 in a year.

  2. Using Pipe Cleaners to Bring the Tree of Life to Life

    Science.gov (United States)

    Halverson, Kristy L.

    2010-01-01

    Phylogenetic trees, such as the "Tree of Life," are commonly found in biology textbooks and are often used in teaching. Because students often struggle to understand these diagrams, I developed a simple, inexpensive classroom model. Made of pipe cleaners, it is easily manipulated to rotate branches, compare topologies, map complete lineages,…

  3. Region specific changes in nonapeptide levels during client fish interactions with allopatric and sympatric cleaner fish.

    Science.gov (United States)

    Soares, Marta C; Cardoso, Sónia C; Mazzei, Renata; André, Gonçalo I; Morais, Marta; Gozdowska, Magdalena; Kalamarz-Kubiak, Hanna; Kulczykowska, Ewa

    2017-01-01

    Social relationships are crucially dependent on individual ability to learn and remember ecologically relevant cues. However, the way animals recognize cues before engaging in any social interaction and how their response is regulated by brain neuromodulators remains unclear. We examined the putative involvement of arginine vasotocin (AVT) and isotocin (IT), acting at different brain regions, during fish decision-making in the context of cooperation, by trying to identify how fish distinguish and recognize the value of other social partners or species. We hypothesized that the behavioural responses of cleaner fish clients to different social contexts would be underlain by changes in brain AVT and IT levels. We have found that changes in AVT at the level of forebrain and optic tectum are linked with a response to allopatric cleaners (novel or unfamiliar stimuli) while those at cerebellum are associated with the willingness to be cleaned (in response to sympatric cleaners). On the other hand, higher brain IT levels that were solely found in the diencephalon, also in response to allopatric cleaners. Our results are the first to implicate these nonapeptides, AVT in particular, in the assessment of social cues which enable fish to engage in mutualistic activities.

  4. General wisdom concerning the factors affecting the adoption of cleaner technologies: a survey 1990-2007

    NARCIS (Netherlands)

    Montalvo Corral, C.

    2008-01-01

    Cleaner technologies (CT) have recently received much attention in diverse media and policy agendas. This comes out of the clear role they play in environmental protection and sustainability and the large potential to contribute to economic growth and competitiveness. The realization of both

  5. Application of new pre-isolation techniques to mode cleaner design

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, Pablo [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Woolley, Andrew [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Zhao Chunnong [Computer and Information Science, Edith Cowan University, Mount Lawley, WA 6050 (Australia); Blair, David G [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)

    2004-03-07

    Two very low frequency pre-isolation stages can greatly reduce the residual motion of suspended optical components. In a mode cleaner this can reduce the control forces required on the mirrors, simplifying lock acquisition and reducing noise injection through control forces. This paper describes a 12 m triangular suspended mode cleaner under construction for the AIGO high optical power interferometer. A novel and very compact multistage isolator supports the cavity mirrors. It combines an inverse pendulum in series with a low-mass Roberts linkage, both with pendulum frequencies below 0.1 Hz. The suspension chain is connected to the Roberts linkage via a Euler spring stage and a cantilever spring assembly for vertical isolation. We present an analysis of the mode cleaner, emphasizing the advantage of the improved mode-cleaner suspension and its power-handling capability. The effect of seismic noise on the residual velocity of the mirrors and the predicted frequency stability of the optical cavity are presented.

  6. Application of new pre-isolation techniques to mode cleaner design

    International Nuclear Information System (INIS)

    Barriga, Pablo; Woolley, Andrew; Zhao Chunnong; Blair, David G

    2004-01-01

    Two very low frequency pre-isolation stages can greatly reduce the residual motion of suspended optical components. In a mode cleaner this can reduce the control forces required on the mirrors, simplifying lock acquisition and reducing noise injection through control forces. This paper describes a 12 m triangular suspended mode cleaner under construction for the AIGO high optical power interferometer. A novel and very compact multistage isolator supports the cavity mirrors. It combines an inverse pendulum in series with a low-mass Roberts linkage, both with pendulum frequencies below 0.1 Hz. The suspension chain is connected to the Roberts linkage via a Euler spring stage and a cantilever spring assembly for vertical isolation. We present an analysis of the mode cleaner, emphasizing the advantage of the improved mode-cleaner suspension and its power-handling capability. The effect of seismic noise on the residual velocity of the mirrors and the predicted frequency stability of the optical cavity are presented

  7. A study on the sound quality evaluation model of mechanical air-cleaners

    DEFF Research Database (Denmark)

    Ih, Jeong-Guon; Jang, Su-Won; Jeong, Cheol-Ho

    2009-01-01

    In operating the air-cleaner for a long time, people in a quiet enclosed space expect low sound at low operational levels for a routine cleaning of air. However, in the condition of high operational levels of the cleaner, a powerful yet nonannoying sound is desired, which is connected to a feeling...... of an immediate cleaning of pollutants. In this context, it is important to evaluate and design the air-cleaner noise to satisfy such contradictory expectations from the customers. In this study, a model for evaluating the sound quality of air-cleaners of mechanical type was developed based on objective...... and subjective analyses. Sound signals from various aircleaners were recorded and they were edited by increasing or decreasing the loudness at three wide specific-loudness bands: 20-400 Hz (0-3.8 barks), 400-1250 Hz (3.8-10 barks), and 1.25- 12.5 kHz bands (10-22.8 barks). Subjective tests using the edited...

  8. CASE STUDY: Nepal — A cleaner city and better health in Kathmandu

    International Development Research Centre (IDRC) Digital Library (Canada)

    2003-04-07

    Apr 7, 2003 ... CASE STUDY: Nepal — A cleaner city and better health in Kathmandu .... Dr Joshi believes that blending science and a recognition of the social ... One example of where AMESH was applied was in analyzing why the ward ...

  9. Research on Duct Flow Field Optimisation of a Robot Vacuum Cleaner

    Directory of Open Access Journals (Sweden)

    Xiao-bo Lai

    2011-11-01

    Full Text Available The duct of a robot vacuum cleaner is the length of the flow channel between the inlet of the rolling brush blower and the outlet of the vacuum blower. To cope with the pressure drop problem of the duct flow field in a robot vacuum cleaner, a method based on Pressure Implicit with Splitting of Operators (PRISO algorithm is introduced and the optimisation design of the duct flow field is implemented. Firstly, the duct structure in a robot vacuum cleaner is taken as a research object, with the computational fluid dynamics (CFD theories adopted; a three-dimensional fluid model of the duct is established by means of the FLUENT solver of the CFD software. Secondly, with the k-∊ turbulence model of three-dimensional incompressible fluid considered and the PRISO pressure modification algorithm employed, the flow field numerical simulations inside the duct of the robot vacuum cleaner are carried out. Then, the velocity vector plots on the arbitrary plane of the duct flow field are obtained. Finally, an investigation of the dynamic characteristics of the duct flow field is done and defects of the original duct flow field are analysed, the optimisation of the original flow field has then been conducted. Experimental results show that the duct flow field after optimisation can effectively reduce pressure drop, the feasibility as well as the correctness of the theoretical modelling and optimisation approaches are validated.

  10. Research on Duct Flow Field Optimisation of a Robot Vacuum Cleaner

    Directory of Open Access Journals (Sweden)

    Xiao-bo Lai

    2011-11-01

    Full Text Available The duct of a robot vacuum cleaner is the length of the flow channel between the inlet of the rolling brush blower and the outlet of the vacuum blower. To cope with the pressure drop problem of the duct flow field in a robot vacuum cleaner, a method based on Pressure Implicit with Splitting of Operators (PRISO algorithm is introduced and the optimisation design of the duct flow field is implemented. Firstly, the duct structure in a robot vacuum cleaner is taken as a research object, with the computational fluid dynamics (CFD theories adopted; a three‐dimensional fluid model of the duct is established by means of the FLUENT solver of the CFD software. Secondly, with the k‐ε turbulence model of three‐ dimensional incompressible fluid considered and the PRISO pressure modification algorithm employed, the flow field numerical simulations inside the duct of the robot vacuum cleaner are carried out. Then, the velocity vector plots on the arbitrary plane of the duct flow field are obtained. Finally, an investigation of the dynamic characteristics of the duct flow field is done and defects of the original duct flow field are analysed, the optimisation of the original flow field has then been conducted. Experimental results show that the duct flow field after optimisation can effectively reduce pressure drop, the feasibility as well as the correctness of the theoretical modelling and optimisation approaches are validated.

  11. Physical Fitness of Cleaners in Faculty of Medicine Universitas Padjadjaran, November 2012

    Directory of Open Access Journals (Sweden)

    Adi Wibisono Sulistijo

    2015-09-01

    Full Text Available Background: Cleaning is an occupation that is carried out worldwide in many different environments. Cleaning workers (cleaners often have low occupational skills and belong to the less advantaged educational and socioeconomic groups. Because of the high physical work demands and low cardiorespiratory fitness, cleaners have the risk to have cardiovascular diseases. The aim of this study was to measure the 5 components of physical fitness (cardiorespiratory endurance, muscle endurance, muscle strength, flexibility and body composition of cleaners in Faculty of Medicine Universitas Padjadjaran. Methods: A descriptive study was carried out to all cleaners (31 persons of Faculty of Medicine Universitas Padjadjaran in November 2012. The subjects were tested for cardiorespiratory endurance, muscle endurance, muscle strength, flexibility and body composition. The results were categorized using the standard of Ministry of Health Republic Indonesia. Results: From 31 subjects, cardiorespiratory endurance was in poor category (50%. Shoulder and hand muscle endurance was in poor category (54.8% and stomach muscle endurance was in very poor category (67.7%. Hand−grip muscular strength was in very poor category: right hand (80.7% and left hand (87.1%. Back muscle strength was in poor category (58.1%. Leg muscular strength was in very poor category (48.4%. Flexibility was in a very good category (97% and body composition was also in a good category (54.8%. Conclusions: From 5 components of cleaners’ physical fitness, 3 components (cardiorespiratory endurance, muscle endurance and muscular strength are in poor and very poor category.

  12. Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

    NARCIS (Netherlands)

    Ham, J.M.

    1996-01-01

    A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

  13. A name is a name is a name: some thoughts and personal opinions about molluscan scientific names

    NARCIS (Netherlands)

    Dance, S.P.

    2009-01-01

    Since 1758, with the publication of Systema Naturae by Linnaeus, thousands of scientific names have been proposed for molluscs. The derivation and uses of many of them are here examined from various viewpoints, beginning with names based on appearance, size, vertical distribution, and location.

  14. Evaluation of ozone generation and indoor organic compounds removal by air cleaners based on chamber tests

    Science.gov (United States)

    Yu, Kuo-Pin; Lee, Grace Whei-May; Hsieh, Ching-Pei; Lin, Chi-Chi

    2011-01-01

    Ozone can cause many health problems, including exacerbation of asthma, throat irritation, cough, chest ache, shortness of breath, and respiratory infections. Air cleaners are one of the sources of indoor ozone, and thus the evaluation of ozone generated by air cleaners is desired significant issue. Most evaluation methods proposed are based on chamber tests. However, the adsorption and desorption of ozone on the wall of test chamber and the deposition of ozone resulted from the surface reaction can influence the evaluation results. In this study, we developed a mass balance model that took the adsorption, desorption and deposition of ozone into consideration to evaluate the effective ozone emission rates of six selected air cleaners. The experiments were conducted in a stainless steel chamber with a volume of 11.3 m 3 at 25 °C and 60% relative humidity. The adsorption, desorption and deposition rate constants of ozone obtained by fitting the model to the experimental data were k a = 0.149 ± 0.052 m h -1, k d = 0.013 ± 0.007 h -1, and k r = 0.050 ± 0.020 h -1, respectively. The effective ozone emission rates of Air Cleaners No. 1, 2, and 3 ranged between 13,400-24,500 μg h -1, 7190-10,400 μg h -1, and 4880-6560 μg h -1, respectively, which were more stable than those of No.4, 5, and 6. The effective ozone emission rates of Air Cleaners No. 4, 5, and 6 increased with the time of operation which might be relevant to the decrease of ozone removal by the "aging" filter installed in these cleaners. The removal of toluene and formaldehyde by these six air cleaners were also evaluated and the clean air delivery rates (CADRs) of these two pollutants ranged from non-detectable to 0.42 ± 0.08 m 3 h -1, and from non-detectable to 0.75 ± 0.07 m 3 h -1, respectively. The CADRs showed an insignificant relationship with the effective ozone emission rates. Thus, the removal of toluene and formaldehyde might be resulted from the adsorption on the filters and the

  15. Multi-language naming game

    Science.gov (United States)

    Zhou, Jianfeng; Lou, Yang; Chen, Guanrong; Tang, Wallace K. S.

    2018-04-01

    Naming game is a simulation-based experiment used to study the evolution of languages. The conventional naming game focuses on a single language. In this paper, a novel naming game model named multi-language naming game (MLNG) is proposed, where the agents are different-language speakers who cannot communicate with each other without a translator (interpreter) in between. The MLNG model is general, capable of managing k different languages with k ≥ 2. For illustration, the paper only discusses the MLNG with two different languages, and studies five representative network topologies, namely random-graph, WS small-world, NW small-world, scale-free, and random-triangle topologies. Simulation and analysis results both show that: 1) using the network features and based on the proportion of translators the probability of establishing a conversation between two or three agents can be theoretically estimated; 2) the relationship between the convergence speed and the proportion of translators has a power-law-like relation; 3) different agents require different memory sizes, thus a local memory allocation rule is recommended for saving memory resources. The new model and new findings should be useful for further studies of naming games and for better understanding of languages evolution from a dynamical network perspective.

  16. Number names and number understanding

    DEFF Research Database (Denmark)

    Ejersbo, Lisser Rye; Misfeldt, Morten

    2014-01-01

    This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 syste...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

  17. Asteroid named after CAS scientist

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ An asteroid has been named after CAS astronomy historian XI Zezong with the approval of the International Minor Planet Nomenclature Committee (IMPNC), announced China's National Astronomical Observatories at CAS (NAOC) on 17 August.

  18. Dictionary of Minor Planet Names

    CERN Document Server

    Schmadel, Lutz D

    2007-01-01

    Dictionary of Minor Planet Names, Fifth Edition, is the official reference for the field of the IAU, which serves as the internationally recognised authority for assigning designations to celestial bodies and any surface features on them. The accelerating rate of the discovery of minor planets has not only made a new edition of this established compendium necessary but has also significantly altered its scope: this thoroughly revised edition concentrates on the approximately 10,000 minor planets that carry a name. It provides authoritative information about the basis for all names of minor planets. In addition to being of practical value for identification purposes, this collection provides a most interesting historical insight into the work of those astronomers who over two centuries vested their affinities in a rich and colorful variety of ingenious names, from heavenly goddesses to more prosaic constructions. The fifth edition serves as the primary reference, with plans for complementary booklets with newl...

  19. Elemental Etymology: What's in a Name?

    Science.gov (United States)

    Ball, David W.

    1985-01-01

    Examines the origin of the names (or etymologies) of the chemical elements. Includes tables listing elements: (1) with names of obscure origin; (2) named for colors; (3) named after real or mythical people; (4) named after places; (5) named after heavenly bodies; and (6) having names of miscellaneous origin. (JN)

  20. Evaluation of room air cleaners for the reduction of exposure and dose to indoor radon progeny

    International Nuclear Information System (INIS)

    Hopke, P.K.; Jensen, B.; Wasiolek, P.

    1994-01-01

    Since the proximate source of dose to the cells of the bronchial epithelium is the deposited radon progeny, the exposure and resulting dose could be reduced if the radon decay products were effectively removed from the indoor atmosphere. Thus, room air cleaners could be effective in reducing the risks associated with indoor radon. However, because of the short half-life of 218 Po, it grows back quickly and in the altered aerosol conditions that are produced by the presence of an air cleaner, the exposure/dose conditions as well as the magnitude of the dose can be substantially changed. To examine the nature of the exposure of individuals in normally occupied homes and to determine the effect of various types of room air cleaners on the exposure to and dose from the indoor radon progeny, a series of measurements have been made using an automated graded screen array system. Two extended experiments were performed in homes in Arnprior, Ontario and Parishville, NY, in which filtration systems, a positive ion electrostatic precipitator, and ioniser/fan systems have been tested for their ability to remove both airborne radioactivity and particles. In both experiments, measurements were made over one week periods with an air cleaner operating and the distributions of exposure are compared with measurements of the background conditions when no cleaner is functioning. The doses to both basal and secretory cells of the bronchial epithelium in the first eight generations of the bronchus were calculated using the model developed by James and their distributions are compared among the various exposure conditions. In most cases the presence of the air cleaner reduced the exposure to radon progeny. However, the reductions in dose were generally substantially smaller than the reductions in exposure. In the intercomparisons of the two filtration units and the two identical ioniser/fan systems, the units generally behaved in a similar manner. The results of this substantial set of

  1. Naming analog clocks conceptually facilitates naming digital clocks

    NARCIS (Netherlands)

    Meeuwissen, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

    2004-01-01

    Naming digital clocks (e.g., 2:45, say "quarter to three") requires conceptual operations on the minute and hour information displayed in the input for producing the correct relative time expression. The interplay of these conceptual operations was investigated using a repetition priming paradigm.

  2. Effects on musculoskeletal pain, work ability and sickness absence in a 1-year randomised controlled trial among cleaners

    DEFF Research Database (Denmark)

    Jørgensen, Marie B.; Faber, Anne; Hansen, Jørgen V.

    2011-01-01

    Only a few workplace initiatives among cleaners have been reported, even though they constitute a job group in great need of health promotion. The purpose of this trial was to evaluate the effect of either physical coordination training or cognitive behavioural training on musculoskeletal pain......, work ability and sickness absence among cleaners. A cluster-randomised controlled trial was conducted among 294 female cleaners allocated to either physical coordination training (PCT), cognitive behavioural training (CBTr) or a reference group (REF). Questionnaires about musculoskeletal pain and work...... intervention appeared effective for reducing chronic neck/shoulder pain among the female cleaners. It is recommended that future interventions among similar high-risk job groups focus on the implementation aspects of the interventions to maximise outcomes more distal from the intervention such as work ability...

  3. Evaluating The Operation Of Three Air Cleaners Working Individually In A Clean Room

    DEFF Research Database (Denmark)

    Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

    2011-01-01

    The use of portable air cleaners is becoming increasingly popular in many countries including Denmark. Portable air cleaners are known for not only removing but also generating particles and gases. To clarify this, three air cleaning technologies were evaluated. They were nonthermal plasma......, photochemical air purifier and corona discharge ionizer. The concentrations of ultrafine particles, ozone and total volatile organic compounds were measured both in a duct and in a clean room. It was found that the studied air cleaning technologies increased the ozone level in the clean room and the duct....... The increase of ozone level in the clean room was more than that was measured in the duct. Additionally, it was found that the number of ultrafine particles in the room increased due to the generated ozone. The number of generated particles changed with the season. The study leads to the recommendation...

  4. Playing after work? Opportunities and challenges of a physical activity programme for female cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2016-01-01

    The workplace is regarded as an ideal setting for health promotion, not least because large sections of the population, including “high risk groups”, can be reached. One group which is reportedly in great demand of health promotion is that of female (migrant) cleaners – the participants in our...... factors constrained and which supported participation. The interviews revealed a high degree of appreciation for the training but also pointed to a number of constraints which were embedded into the participants’ biographies and everyday lives as migrant cleaners in Denmark. Most women had no previous...... experience with sport and exercise and struggled with the high demands at work and a “second shift” at home. As a consequence, most participants found the training too time- and energy-consuming. We conclude that exercise programmes should preferably be conducted at the workplace and during working hours....

  5. Upper-limit on the Advanced Virgo output mode cleaner cavity length noise

    Science.gov (United States)

    Bonnand, R.; Ducrot, M.; Gouaty, R.; Marion, F.; Masserot, A.; Mours, B.; Pacaud, E.; Rolland, L.; Was, M.

    2017-09-01

    The Advanced Virgo detector uses two monolithic optical cavities at its output port to suppress higher order modes and radio frequency sidebands from the carrier light used for gravitational wave detection. These two cavities in series form the output mode cleaner. We present a measured upper limit on the length noise of these cavities that is consistent with the thermo-refractive noise prediction of 8×10-16~m~Hz-1/2 at 15 Hz. The cavity length is controlled using Peltier cells and piezo-electric actuators to maintain resonance on the incoming light. A length lock precision of 3.5×10-13 m is achieved. These two results are combined to demonstrate that the broadband length noise of the output mode cleaner in the 10-60 Hz band is at least a factor 10 below other expected noise sources in the Advanced Virgo detector design configuration.

  6. Risk assessment of amorphous silicon dioxide nanoparticles in a glass cleaner formulation

    Science.gov (United States)

    Scheel, Julia; Karsten, Stefan; Stelter, Norbert; Wind, Thorsten

    2013-01-01

    Since nanomaterials are a heterogeneous group of substances used in various applications, risk assessment needs to be done on a case-by-case basis. Here the authors assess the risk (hazard and exposure) of a glass cleaner with synthetic amorphous silicon dioxide (SAS) nanoparticles during production and consumer use (spray application). As the colloidal material used is similar to previously investigated SAS, the hazard profile was considered to be comparable. Overall, SAS has a low toxicity. Worker exposure was analysed to be well controlled. The particle size distribution indicated that the aerosol droplets were in a size range not expected to reach the alveoli. Predictive modelling was used to approximate external exposure concentrations. Consumer and environmental exposure were estimated conservatively and were not of concern. It was concluded based on the available weight-of-evidence that the production and application of the glass cleaner is safe for humans and the environment under intended use conditions. PMID:22548260

  7. Field evaluation and health assessment of air cleaners in removing radon decay products in domestic environments

    International Nuclear Information System (INIS)

    Li, Chih-Shan.

    1990-01-01

    In this study, field evaluations of two types of air cleaners were conducted in three single-family houses. The measurements included radon concentration, particle number concentration, and concentration and size distribution of radon decay products. The influence on the behavior of radon decay products by various indoor particles both with and without the air cleaning systems was investigated. A room model was used to calculate the changes in the aerosol parameters caused by the operation of the air cleaners. Using the James dosimetric models (1989 and 1990), the changes in the hourly bronchial dose rate per Bq m -3 radon for men, women, and children can be estimated for various domestic environments. 94 refs., 60 figs., 28 tabs

  8. Incorporation of occupational health and safety in cleaner production projects in South Africa

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2002-01-01

    The purpose of this research is to reveal ways in which occupational health and safety can be integrated in environmental cleaner production projects. Of particular interest are those cleaner production projects that are run by the Danish government's environmental assistance agency, Danced......, in South Africa.The study explores two main avenues of integration. First, integrating through better planning, focussing at the tools and procedures in use by Danced for project management -- integrating occupational health and safety into the project specification, so to speak.Second, integrating...... occupational health and safety into the environmental activities that take place at company level. Two ways of doing so are explored, the main distinction being company size. For large companies, integration of management systems may be attractive. For small companies, integration into a less formal network...

  9. Level of self-reported neck/shoulder pain and biomechanical workload in cleaners

    DEFF Research Database (Denmark)

    Madeleine, Pascal; Søgaard, Karen; Holtermann, Andreas

    2012-01-01

    The aim of the present study was to investigate the relation between self-reported pain, muscular activity and postural load during cleaning tasks. Eighteen cleaners performed usual cleaning tasks in both a laboratory and a lecture room. The level of perceived pain in the neck-shoulder region......-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes during cleaning tasks. The 10th, 50th and 90th percentiles of the angular distributions were computed to characterize postures and movements. Pain tended to play a significant role on RMS of left/right trapezius and left...... erector spinae muscles (P≤0.08). Cleaners with low pain level exhibited higher muscular activity during cleaning. Pain played or tended to play a significant role on PE of left and right erector spinae muscles (P≤0.08). Pain played a significant role on the 10th, 50th and 90th percentile (P...

  10. Control and automatic alignment of the output mode cleaner of GEO 600

    Energy Technology Data Exchange (ETDEWEB)

    Prijatelj, M; Grote, H; Degallaix, J; Hewitson, M; Affeldt, C; Leong, J; Lueck, H; Strain, K A; Wittel, H; Willke, B; Danzmann, K [Max-Planck-Institut fuer Gravitationsphysik (Albert-Einstein-Institut) and Leibniz Universitaet Hannover, Callinstr. 38, 30167 Hannover (Germany); Hild, S; Freise, A, E-mail: mirko.prijatelj@aei.mpg.d [School of Physics and Astronomy, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2010-05-01

    The implementation of a mode cleaner at the output port of the GEO 600 gravitational wave detector will be part of the upcoming transition from GEO 600 to GEO-HF. Part of the transition will be the move from a heterodyne readout to a DC readout scheme. DC readout performance will be limited by higher order optical modes and control sidebands present at the output port. For optimum performance of DC readout an output mode cleaner (OMC) will clean the output beam of these contributions. Inclusion of an OMC will introduce new noise sources whose magnitudes needed to be estimated and for which new control systems will be needed. In this article we set requirements on the performance of these control systems and investigate the simulated performance of different designs.

  11. Sustainability in pelletizing iron ore through the Industrial Ecology and Cleaner Production Program

    Directory of Open Access Journals (Sweden)

    Cristiano Farias Coelho

    2013-06-01

    Full Text Available This study aims to analyze the practices of a pelletizing iron ore industry with respect to adoption of pollution prevention measures, suggested by applying the concepts of Cleaner Production and Material Flow Analysis. The technical procedure adopted was the case study, the data collection was done through direct observation, with field research and literature review. The main results were obtained from analysis of company reports available to the public, but require a more detailed quantification of data. The study concludes that the identification of environmental opportunities is possible through the proposed implementation of Cleaner Production program, which provides better results when combined with the precepts of the industrial ecology tool, the Material Flow Analysis.

  12. What drives successful implementation of pollution prevention and cleaner technology strategy? The role of innovative capability.

    Science.gov (United States)

    Bhupendra, Kumar Verma; Sangle, Shirish

    2015-05-15

    Firms that are dynamic and prepared to implement environmental strategies have a potential competitive advantage over their industry counterparts. Therefore, it is important to understand, what capabilities are required to implement proactive environmental strategies. The paper discusses the attributes of innovative capability required by firms in order to adopt pollution prevention and cleaner technology strategies. Empirical results show that process and behavioral innovativeness are required by firms to implement a pollution prevention strategy. In addition to process and behavioral innovativeness, firms need a top management with high risk-taking ability as well as market, product, and strategic innovativeness to implement a cleaner technology strategy. The paper proposes some important managerial implications on the basis of the above research findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Equal-sign lepton pairs: a cleaner W-signal in panti p collisions

    International Nuclear Information System (INIS)

    Abud, M.; Gatto, R.; Savoy, C.A.

    1978-01-01

    It is pointed out that the observation of the energetic equal-sign dileptons in high-energy panti p colliding beams may provide for a cleaner way of detecting the W. It is assumed that the most energetic dileptons come from the semileptonic decays of the t- and b-quarks. The authors calculate the dilepton signal from weak interaction and compare it with the strong interaction background as predicted by QCD. (Auth.)

  14. Identifying and Prioritizing Cleaner Production Strategies in Raw Materials’ Warehouse of Yazdbaf Textile Company in 2015

    OpenAIRE

    Mohammad Taghi Ghaneian; Raziye Montazerolfaraj; Hakime Selsele Vaziri; Mohammad Hassan Ehrampoush; Alireza Arsalan; Tahere Zarabie

    2017-01-01

    Introduction: Cleaner productions in textile industry is achieved by reducing water and chemicals’ consumption, saving energy, reducing production of air pollution and solid wastes, reducing toxicity and noise pollution through many solutions. The purpose of the present research was to apply Strengths, Weaknesses, Opportunities, Threats (SWOT) and Quality Systems Planning Matrix (QSPM) techniques in identifying and prioritizing production in raw materials’ warehouse of Yazdbaf Tex...

  15. Life-History Traits and Population Structure of Pederson Cleaner Shrimps Ancylomenes pedersoni.

    Science.gov (United States)

    Gilpin, Jessica A; Chadwick, Nanette E

    2017-12-01

    Cleaner organisms perform key functional roles in reducing rates of parasitism in marine communities. Pederson cleaner shrimps Ancylomenes pedersoni are major cleaners of reef fishes in the tropical western Atlantic and form obligate symbioses with host sea anemones. Information about their life-history traits would contribute to understanding how symbiosis impacts life-history evolution in crustaceans, but little is known about patterns of growth and reproduction in this anemone shrimp. We quantified growth, sexual reproduction, senescence, and mortality in individuals of A. pedersoni under laboratory conditions and their abundance and population size structure on coral reefs in St. Thomas, U.S. Virgin Islands. Von Bertalanffy growth curves were fitted to the data to determine age-size relationships, and the Beverton-Holt model was used to estimate mortality rates and size at maximum yield. Individuals grew rapidly when young, then slowed their growth after reaching sexual maturity at ~6 months. Individuals were gonochoric, with males attaining significantly smaller body sizes and shorter life spans than did females. Prior to death at <2 years, members of both genders exhibited senescence during which they ceased reproducing, shrank (females only), and decreased their activity levels over ~1-4 weeks. Field populations were abundant and composed mostly of juveniles during both years examined. Populations appeared to be stable but highly dynamic in terms of individuals, reaching maximum yield at 4 months of age. We conclude that obligate symbiosis with large sea anemones and cleaner mutualism with reef fishes both contribute to explaining aspects of the life history of Pederson shrimps, especially their apparent mating system of pure-search polygynandry. This life-history information also provides a scientific basis for sustainable fishery management and aquaculture of this key coral reef organism.

  16. Overview of cleaner production as a result of clean technology research in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Sam, D.V.; Nhan, T.V.; Lan, N.N. [Hanoi Univ. of Technology (Viet Nam)

    1996-12-31

    Vietnam is beginning its industrialization process, and it currently lacks the capital necessary for expensive pollution control and treatment systems. Pollution strategies are critical for the country. This study evaluates the present status of industry and the pollution problems associated with industrial development in Vietnam. The purpose of the study is to identify sectors that may have potential for promoting cleaner production practices. 4 refs.

  17. Visibility and Social Recognition as Psychosocial Work Environment Factors among Cleaners in a Multi-Ethnic Workplace Intervention

    Directory of Open Access Journals (Sweden)

    Kirsten Hviid

    2012-12-01

    Full Text Available This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants’ low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called “Make a Difference” designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom’s “readiness for cleaning”, and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners’ psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners’ experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered.

  18. Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company

    Directory of Open Access Journals (Sweden)

    Yaghob Asadizadeh

    2018-02-01

    Full Text Available Cleaner production process is an environmentally friendly approach that attempts to reduce waste and energy consumption then reduce environmental pollutions of industrial processes to provide the possibility of sustainable production in industrial units. To achieve this goal and alignment with cleaner production strategies, paper industries should consider reducing wastes of production processes and irregular consumption of energy as a priority in their programs. In this research Analytic Hierarchy Process has been applied and a three level hierarchy model was structured to facilitate the cleaner production process in Latif paper products firm. Using a literature review and field study, the proposed model provided a framework for cleaner production implementation in the firm. Results showed priorities of the main criteria of cleaner production are process change, product modification, implementation of preventive maintenance system, resititution and man force capitals respectively. Process change criterion allocated 40 percent of the total weighing value and has the highest priority in implementation of cleaner production strategy. Existence of industrial automation and its technology level which is a sub criterion of process change has the highest priority among 31 sub criteria. Also some of higher priority sub criteria such as use of higher quality inclusion and implementation of calibration system are related to process change. Therefore, to achieve cleaner production goals and implementation of its strategic objectives it is necessary to pay more attention to this criterion. Inconsistency ratio of the research is 0.06 which indicates the results are compatible. The results of this research can be used to accelerate the implementation of cleaner production process in Iran’s pulp and paper industry.

  19. Visibility and Social Recognition as Psychosocial Work Environment Factors among Cleaners in A Multi-Ethnic Workplace Intervention

    OpenAIRE

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2012-01-01

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention ca...

  20. Evaluation of the efficacy of vacuum cleaners for the integrated control of brown spider Loxosceles intermedia

    Directory of Open Access Journals (Sweden)

    E. N. Ramires

    2007-01-01

    Full Text Available Some venomous spiders of the genus Loxosceles can reach high population densities inside and around houses. In Brazil, most spider accidents are related to Loxosceles intermedia. Control of loxoscelism should utilize integrated pest management tools, such as vacuum cleaners, to eliminate egg sacs, webs and spiders. The present study tested the efficacy of one type of vacuum cleaner (for professional and domestic use in the control of L. intermedia populations. Cockroaches (Pycnoscelus surinamensis were used in some tests for comparison. Vacuuming using standard accessories or a paper tube resulted in the death of all female (n=60, male (n=60, young (n=60 and just-hatched (n=60 L. intermedia, and all egg sacs (n=5 were destroyed. The removal of the plastic plate present at the bottom of the vacuuming tube inside the machine allowed some spiders to survive the vacuuming process. When kept inside a vacuum bag full of dust and debris, adult females (n=10 survived for 10 days; however, significant mortality was observed among male (n=10 and young individuals (n=10. Addition of cornstarch to the vacuum bag did not affect the spiders (n=20. Vacuum cleaners, such as the one used in the present investigation, are promising tools for integrated management of L. intermedia and other spiders in domestic environments.

  1. Sustainability and cleaner production: a study on the implications competitive advantage in business

    Directory of Open Access Journals (Sweden)

    Jaqueline Guimarães Santos

    2015-08-01

    Full Text Available This paper discusses the relationship between the adoption of environmental management system in the business and the competitive advantages that can result from this process. Therefore, the effects are discussed the emergence of a model of sustainable development and the role and opportunities of the company that perspective. Being theoretical, the aim of this paper is to discuss the potential contributions that the implementation of cleaner production technology can offer to the enterprise competitive strategy. To elucidate these relationships are discussed concepts relating to the introduction of an environmental management system, which emphasized the use of environmental measures, specifically the inherent Cleaner Production that aim to reduce the environmental impacts of industrial production, eliminating waste and reducing costs. Moreover, the concept of competitive advantage is crafted light of assumptions Porter on profitability from cost reduction and product differentiation. The findings indicate that the introduction of the Cleaner Production to reduce costs and add value to the image of the product, is an instrument of competitiveness that allows the company to differentiate and gain competitive advantage.

  2. Blood cleaner on-chip design for artificial human kidney manipulation

    Directory of Open Access Journals (Sweden)

    Suwanpayak N

    2011-05-01

    Full Text Available N Suwanpayak1, MA Jalil2, MS Aziz3, FD Ismail3, J Ali3, PP Yupapin11Nanoscale Science and Engineering Research Alliance (N'SERA, Advanced Research Center for Photonics, Faculty of Science, King Mongkut's Institute of Technology, Ladkrabang, Bangkok, Thailand; 2Ibnu Sina Institute of Fundamental Science Studies (IIS, 3Institute of Advanced Photonics Science, Nanotechnology Research Alliance, Universiti Teknologi Malaysia, Johor Bahru, MalaysiaAbstract: A novel design of a blood cleaner on-chip using an optical waveguide known as a PANDA ring resonator is proposed. By controlling some suitable parameters, the optical vortices (gradient optical fields/wells can be generated and used to form the trapping tools in the same way as optical tweezers. In operation, the trapping force is formed by the combination between the gradient field and scattering photons by using the intense optical vortices generated within the PANDA ring resonator. This can be used for blood waste trapping and moves dynamically within the blood cleaner on-chip system (artificial kidney, and is performed within the wavelength routers. Finally, the blood quality test is exploited by the external probe before sending to the destination. The advantage of the proposed kidney on-chip system is that the unwanted substances can be trapped and filtered from the artificial kidney, which can be available for blood cleaning applications.Keywords: optical trapping, blood dialysis, blood cleaner, human kidney manipulation

  3. EVALUATION AND ACTIONS OF CLEANER PRODUCTION IN GALVANIC INDUSTRY OF THE VILLA CLARA PROVINCE

    Directory of Open Access Journals (Sweden)

    Petra G. Velazco Pedroso

    2015-10-01

    Full Text Available In this paper, the assessment results accomplished in different processes of the galvanic industry are presented and it is taking into account the application of good practices and measures of Cleaner Production. The main critical points in the processes of metallic coating were identified; and the characterization of the effluents generated by the installation is done. A number of technological changes in the processes are proposed, as well as the introduction of cleaner production measures which contribute to increase the efficiency and safety of processes, reduce risks and improvements to internal operations. It provides advantages of economic, environmental and social nature for the galvanic industry due to the minimizing of the impacts on environment, because the sewage and its pollutant load are reduced. Besides, we can save water, energy and raw materials. The economic evaluation showed the feasibility of applying the Cleaner Production (PML measures proposed with a Net Present Value (NPV of $109 696.26, and an Internal Rate of Return (IRR of 64 % value and payback period lower than two years.

  4. The performance of cleaner wrasse, Labroides dimidiatus, in a reversal learning task varies across experimental paradigms.

    Science.gov (United States)

    Gingins, Simon; Marcadier, Fanny; Wismer, Sharon; Krattinger, Océane; Quattrini, Fausto; Bshary, Redouan; Binning, Sandra A

    2018-01-01

    Testing performance in controlled laboratory experiments is a powerful tool for understanding the extent and evolution of cognitive abilities in non-human animals. However, cognitive testing is prone to a number of potential biases, which, if unnoticed or unaccounted for, may affect the conclusions drawn. We examined whether slight modifications to the experimental procedure and apparatus used in a spatial task and reversal learning task affected performance outcomes in the bluestreak cleaner wrasse, Labroides dimidiatus (hereafter "cleaners"). Using two-alternative forced-choice tests, fish had to learn to associate a food reward with a side (left or right) in their holding aquarium. Individuals were tested in one of four experimental treatments that differed slightly in procedure and/or physical set-up. Cleaners from all four treatment groups were equally able to solve the initial spatial task. However, groups differed in their ability to solve the reversal learning task: no individuals solved the reversal task when tested in small tanks with a transparent partition separating the two options, whereas over 50% of individuals solved the task when performed in a larger tank, or with an opaque partition. These results clearly show that seemingly insignificant details to the experimental set-up matter when testing performance in a spatial task and might significantly influence the outcome of experiments. These results echo previous calls for researchers to exercise caution when designing methodologies for cognition tasks to avoid misinterpretations.

  5. The association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark.

    Science.gov (United States)

    Carneiro, Isabella G; Rasmussen, Charlotte D N; Jørgensen, Marie B; Flyvholm, Mari-Ann; Olesen, Kasper; Madeleine, Pascal; Ekner, Dorte; Søgaard, Karen; Holtermann, Andreas

    2013-05-01

    The aim of the study is to investigate the association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark. This study is based on a cross-sectional analysis of baseline data from 2007 to 2008. The study population includes 276 cleaners, 144 Danish and 132 non-Western immigrant cleaners. Cumulative sickness absences during a 6-month period from administrative records were subdivided into no sickness absence (0 days), low occurrence of sickness absence (1-10 days) and high occurrence of sickness absence (over 10 days). Measures of health consisted of self-report and objective assessments. The relationship between sickness absence and health was analyzed through multinomial logistic regression, stratified by immigrant status. For both Danish and non-Western immigrant cleaners, poor self-reported health was significantly related to high occurrence of sickness absence. Among Danish cleaners, high blood pressure was related to high occurrence of sickness absence. Among non-Western immigrant cleaners, total body pain and having one or more diagnosed chronic disease were related to high occurrence of sickness absence. No association between health and low occurrence of sickness absence was found. The findings confirm the importance of health for high occurrence of sickness absence, in both ethnic groups. Moreover, low occurrence of sickness absence was not related to the health conditions investigated.

  6. Moving eyes and naming objects

    NARCIS (Netherlands)

    Meulen, F.F. van der

    2001-01-01

    The coordination between eye movements and speech was examined while speakers were naming objects. Earlier research has shown that eye movements reflect on the underlying visual attention. Also, eye movements were found to reflect upon not only the visual and conceptual processing of an object, but

  7. Can You Say My Name?

    DEFF Research Database (Denmark)

    Erz, Antonia; Christensen, Bo T.

    affect their judgments of people and objects. We extend this research by investigating the effect of phonological fluency on recognition and recall of novel non-word brand names in three laboratory experiments. The results provide us with a more fine-grained idea of fluency effects on memory of non...

  8. African names for American plants

    NARCIS (Netherlands)

    Andel, van T.R.

    2015-01-01

    African slaves brought plant knowledge to the New World, sometimes applying it to related plants they found there and sometimes bringing Old World plants with them. By tracing the linguistic parallels between names for plants in African languages and in communities descended from African slaves,

  9. Academy named after newsreader's wife.

    Science.gov (United States)

    2010-06-24

    AN ADMIRAL nurse academy named in honour of Bonnie Suchet, the wife of former newsreader John Suchet, has opened. The 'virtual' academy, set up by charity dementia UK, Canterbury Christ Church University and the Avante Partnership, will provide continuing professional development and a networking environment for n nurses through its website. Ms Suchet has Alzheimer's disease and is in a care home.

  10. Naming names: the first women taxonomists in mycology

    Directory of Open Access Journals (Sweden)

    Sara Maroske

    2018-03-01

    Full Text Available The transition from amateur to professional in natural history is generally regarded as having taken place in the nineteenth century, but landmark events such as the 1917 appointment of mycologist Johanna Westerdijk (1883–1961 as the first female professor in the Netherlands indicate that the pattern of change for women was more varied and delayed than for men. We investigate this transition in mycology, and identify only 43 women in the Western World who published scientific mycological literature pre-1900, of whom twelve published new fungal taxa. By charting the emergence of these women over time, and comparing the output of self-taught amateurs and university graduates, we establish the key role of access to higher education in female participation in mycology. Using a suite of strategies, six of the self-taught amateurs managed to overcome their educational disadvantages and name names — Catharina Dörrien (the first to name a fungal taxon, Marie-Anne Libert, Mary Elizabeth Banning, Élise-Caroline Bommer, Mariette Rousseau, and Annie Lorrain Smith. By 1900, the professional era for women in mycology was underway, and increasing numbers published new taxa. Parity with male colleagues in recognition and promotion, however, remains an ongoing issue. Key words: Amateurs, Fungi, Gender studies, History of science, Plant pathology

  11. Zefinha - the name of abandonment.

    Science.gov (United States)

    Diniz, Debora

    2015-09-01

    Zefinha has been living in a forensic hospital for the last 39 years. She is the longest female inhabitant surviving under compulsory psychiatric treatment in Brazil. This paper discusses how the ethical rule of anonymity might be revised in research concerning a unique case involving severe violations of human rights. My argument is that there are cases in which disclosing the names of research participants protects their interests and rights.

  12. Measurements of differential cross sections for the reactions 6,7Li(n,d)5,6He and 6,7Li(n,t)4,5He at 14.1 MeV

    International Nuclear Information System (INIS)

    Shirato, Shoji; Hata, Kazuhiro; Ando, Yoshiaki; Shibuya, Shinji; Shibata, Keiichi.

    1989-08-01

    A summary of our measured cross sections for the 14.1 MeV neutron-induced reactions on lithium isotopes has been presented. Our data were measured with two counter telescopes, each of which consisted of two gas proportional counters and silicon ΔE and E detectors. Measured energy spectra of deuterons and tritons from 6 Li(n,d)n 4 He and 7 Li(n,t)n 4 He, respectively, were analyzed by a simple final-state interaction theory. Measured angular distributions for these reactions as well as 6 Li(n,t) 4 He and 7 Li(n,d) 6 He were analyzed by exact finite-range distorted wave Born approximation (EFR-DWBA) calculations. Spectroscopic factors extracted from the EFR-DWBA analyses have been compared with theoretical predictions. (author)

  13. Thermal neutron calibration of a tritium extraction facility using the 6Li(n,t)4He/197Au(n,γ)198Au cross section ratio for standardization

    International Nuclear Information System (INIS)

    Bretscher, M.M.; Smith, D.L.

    1980-08-01

    Absolute tritium activities in a neutron-activated metallic lithium samples have been measured by liquid scintillation methods to provide data needed for the determination of capture-to-fission ratios in fast breeder reactor spectra and for recent measurements of the 7 Li(n,n't) 4 He cross section. The tritium extraction facility used for all these experiments has now been calibrated by measuring the 6 Li(n,t) 4 He/ 197 Au/n,γ) 198 Au activity ratio for thermal neutrons and comparing the result with the well-known cross sections. The calculated-to-measured activity ratio was found to be 1.033 +- 0.018. 2 figures, 20 tables

  14. 27 CFR 5.34 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 5.34 Section... Spirits § 5.34 Brand names. (a) Misleading brand names. No label shall contain any brand name, which... officer finds that such brand name (when appropriately qualified if required) conveys no erroneous...

  15. 27 CFR 7.23 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 7.23 Section... Beverages § 7.23 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name, then the name of the person required to appear on the brand label shall be deemed a...

  16. In the Name of Love

    DEFF Research Database (Denmark)

    Bojesen, Anders; Muhr, Sara Louise

    Accepted Abstract: Most current Human Resource Management discourse stresses coaching, developing and empowering in order to do ‘good' and care for the ‘well-being' of the employees (Steyaert & Janssens, 1999). Legge (1999) symbolizes HRM discourse by the employee being a family member subordinated...... for mankind - in the name of care for the other", and Zizek (2003:23) in a similar matter when he points out that "the ultimate source of evil is compassion itself". Butler (2005) refers to ethical violence when she describes the rigid ethical standards set out to be what Kaulingfreks calls the ‘keeper...

  17. Airborne exposures associated with the typical use of an aerosol brake cleaner during vehicle repair work.

    Science.gov (United States)

    Fries, Michael; Williams, Pamela R D; Ovesen, Jerald; Maier, Andrew

    2018-04-19

    Many petroleum-based products are used for degreasing and cleaning purposes during vehicle maintenance and repairs. Although prior studies have evaluated chemical exposures associated with this type of work, most of these have focused on gasoline and exhaust emissions, with few samples collected solely during the use of an aerosol cleaning product. In this case study, we assess the type of airborne exposures that would be expected from the typical use of an aerosol brake cleaner during vehicle repair work. Eight exposure scenarios were evaluated over a two-day study in which the benzene content of the brake cleaner and potential for dilution ventilation and air flow varied. Both short-term (15 min) and task-based (≥1 hr) charcoal tube samples were collected in the breathing zone and adjacent work area and analyzed for total hydrocarbons (THCs), toluene, and benzene. The majority of personal (N = 48) and area (N = 47) samples had detectable levels of THC and toluene, but no detections of benzene were found. For the personal short-term samples, average airborne concentrations ranged from 3.1 - 61.5 ppm (13.8-217.5 mg/m 3 ) for THC and 2.2 - 44.0 ppm (8.2-162.5 mg/m 3 ) for toluene, depending on the scenario. Compared to the personal short-term samples, average concentrations were generally 2 to 3 times lower for the personal task-based samples and 2 to 5 times lower for the area short-term samples. The highest exposures occurred when the garage bay doors were closed, floor fan was turned off, or greatest amount of brake cleaner was used. These findings add to the limited dataset on this topic and can be used to bound or approximate worker or consumer exposures from use of aerosol cleaning products with similar compositions and use patterns.

  18. Integrated Hydrologic Science and Environmental Engineering Observatory: CLEANER's Vision for the WATERS Network

    Science.gov (United States)

    Montgomery, J. L.; Minsker, B. S.; Schnoor, J.; Haas, C.; Bonner, J.; Driscoll, C.; Eschenbach, E.; Finholt, T.; Glass, J.; Harmon, T.; Johnson, J.; Krupnik, A.; Reible, D.; Sanderson, A.; Small, M.; van Briesen, J.

    2006-05-01

    With increasing population and urban development, societies grow more and more concerned over balancing the need to maintain adequate water supplies with that of ensuring the quality of surface and groundwater resources. For example, multiple stressors such as overfishing, runoff of nutrients from agricultural fields and confined animal feeding lots, and pathogens in urban stormwater can often overwhelm a single water body. Mitigating just one of these problems often depends on understanding how it relates to others and how stressors can vary in temporal and spatial scales. Researchers are now in a position to answer questions about multiscale, spatiotemporally distributed hydrologic and environmental phenomena through the use of remote and embedded networked sensing technologies. It is now possible for data streaming from sensor networks to be integrated by a rich cyberinfrastructure encompassing the innovative computing, visualization, and information archiving strategies needed to cope with the anticipated onslaught of data, and to turn that data around in the form of real-time water quantity and quality forecasting. Recognizing this potential, NSF awarded $2 million to a coalition of 12 institutions in July 2005 to establish the CLEANER Project Office (Collaborative Large-Scale Engineering Analysis Network for Environmental Research; http://cleaner.ncsa.uiuc.edu). Over the next two years the project office, in coordination with CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science, Inc.; http://www.cuahsi.org), will work together to develop a plan for a WATer and Environmental Research Systems Network (WATERS Network), which is envisioned to be a collaborative scientific exploration and engineering analysis network, using high performance tools and infrastructure, to transform our scientific understanding of how water quantity, quality, and related earth system processes are affected by natural and human-induced changes to the environment

  19. Aeroacoustic characteristics and noise reduction of a centrifugal fan for a vacuum cleaner

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Wan Ho; Rew, Ho Seon; Kim, Chang Joon [LG Electronics, Seoul (Korea, Republic of)

    2004-02-01

    The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall Sound Power Level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental Blade Passing Frequency (BPF) is reduced by about 6 dB(A) and the 2{sup nd} BPF is reduced about 20 dB(A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

  20. Aeroacoustic characteristics and noise reduction of a centrifugal fan for a vacuum cleaner

    International Nuclear Information System (INIS)

    Jeon, Wan Ho; Rew, Ho Seon; Kim, Chang Joon

    2004-01-01

    The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall Sound Power Level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental Blade Passing Frequency (BPF) is reduced by about 6 dB(A) and the 2 nd BPF is reduced about 20 dB(A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced

  1. The hydrodynamic basis of the vacuum cleaner effect in continuous-flow PCNL instruments: an empiric approach and mathematical model.

    Science.gov (United States)

    Mager, R; Balzereit, C; Gust, K; Hüsch, T; Herrmann, T; Nagele, U; Haferkamp, A; Schilling, D

    2016-05-01

    Passive removal of stone fragments in the irrigation stream is one of the characteristics in continuous-flow PCNL instruments. So far the physical principle of this so-called vacuum cleaner effect has not been fully understood yet. The aim of the study was to empirically prove the existence of the vacuum cleaner effect and to develop a physical hypothesis and generate a mathematical model for this phenomenon. In an empiric approach, common low-pressure PCNL instruments and conventional PCNL sheaths were tested using an in vitro model. Flow characteristics were visualized by coloring of irrigation fluid. Influence of irrigation pressure, sheath diameter, sheath design, nephroscope design and position of the nephroscope was assessed. Experiments were digitally recorded for further slow-motion analysis to deduce a physical model. In each tested nephroscope design, we could observe the vacuum cleaner effect. Increase in irrigation pressure and reduction in cross section of sheath sustained the effect. Slow-motion analysis of colored flow revealed a synergism of two effects causing suction and transportation of the stone. For the first time, our model showed a flow reversal in the sheath as an integral part of the origin of the stone transportation during vacuum cleaner effect. The application of Bernoulli's equation provided the explanation of these effects and confirmed our experimental results. We widen the understanding of PCNL with a conclusive physical model, which explains fluid mechanics of the vacuum cleaner effect.

  2. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  3. Cleaner Technology in the Hard Disk Drive Manufacturing Industry: A Case Study

    Science.gov (United States)

    Moolla, Premchai; Chompu-inwai, Rungchat

    2010-10-01

    The objectives of this research are to improve raw material and energy consumption efficiency, as well as reduce defects and the use of chemicals in the arm coil assembly process of hard disk drive manufacturing in the case study company by applying the Cleaner Technology concepts. The four main sequential steps used in this research were: (1) pre-assessment, (2) assessment, (3) feasibility study, and (4) implementation. In the first step, raw data, such as process flows, raw material usage and defects data were collected. In the second step, the loss during production and causes of loss were analyzed. Opportunities to reduce raw material, chemical and energy wastage could then be recommended. The next step was to evaluate the feasibility and potential benefits of a particular Cleaner Technology opportunity. Finally, in the last step, after a thorough evaluation and implementation of the opportunities to apply Cleaner Technology, the results showed that arm coil defects could be reduced by improving the production process using the ECRS technique. ECRS stands for Eliminate, Combine, Rearrange and Simplify. This improvement reduced arm coil defect rates from 0.48% to 0.15%, thus saving approximately 139,638 Thai Baht per month. In addition, production stoppage decision made by workers was used to increase employee involvement in defect detection. Allowing workers to participate in such a decision was an effective way to reduce defect rate and could motivate workers to produce a better quality job. This resulted in arm coil defects reducing from 0.41% to 0.025%, with about 74,562 Thai Baht per month saving. Additionally, an increase in the efficiency of electricity consumption occurred, by increasing the speed of the infrared oven conveyor belt, improving average productivity from 533 pieces/hour to 560 pieces/hour, without adversely affecting product costs and quality, thus producing products of up to the value of 206,242 Thai Baht per month. Furthermore, the new

  4. Cleaner metallurgical industry in Serbia: a road to the sustainable development

    Directory of Open Access Journals (Sweden)

    D. Panias

    2009-01-01

    Full Text Available Since the sustainable development has been a global and fundamental objecttive, a metallurgical industrial sector faces some of the most difficult sustainability challenges of any industrial sector. On the other hand, the metallurgical production in Serbia is a very important part of the economy. Due to present facilities and technologies, metallurgical companies face a great challenge to fulfill the requirements introduced by legislature referring to the cleaner production and sustainable development. The state of art in the production, facilities, pollution with some answers to imposed challenges is presented.

  5. Playing after work? Opportunities and challenges of a physical activity programme for female cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2016-01-01

    experience with sport and exercise and struggled with the high demands at work and a “second shift” at home. As a consequence, most participants found the training too time- and energy-consuming. We conclude that exercise programmes should preferably be conducted at the workplace and during working hours....... factors constrained and which supported participation. The interviews revealed a high degree of appreciation for the training but also pointed to a number of constraints which were embedded into the participants’ biographies and everyday lives as migrant cleaners in Denmark. Most women had no previous...

  6. Astigmatism compensation in mode-cleaner cavities for the next generation of gravitational wave interferometric detectors

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, Pablo J. [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)]. E-mail: pbarriga@cyllene.uwa.edu.au; Zhao Chunnong [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Blair, David G. [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)

    2005-06-06

    Interferometric gravitational wave detectors use triangular ring cavities to filter spatial and frequency instabilities from the input laser beam. The next generation of interferometric detectors will use high laser power and greatly increased circulating power inside the cavities. The increased power inside the cavities increases thermal effects in their mirrors. The triangular configuration of conventional mode-cleaners creates an intrinsic astigmatism that can be corrected by using the thermal effects to advantage. In this Letter we show that an astigmatism free output beam can be created if the design parameters are correctly chosen.

  7. Astigmatism compensation in mode-cleaner cavities for the next generation of gravitational wave interferometric detectors

    International Nuclear Information System (INIS)

    Barriga, Pablo J.; Zhao Chunnong; Blair, David G.

    2005-01-01

    Interferometric gravitational wave detectors use triangular ring cavities to filter spatial and frequency instabilities from the input laser beam. The next generation of interferometric detectors will use high laser power and greatly increased circulating power inside the cavities. The increased power inside the cavities increases thermal effects in their mirrors. The triangular configuration of conventional mode-cleaners creates an intrinsic astigmatism that can be corrected by using the thermal effects to advantage. In this Letter we show that an astigmatism free output beam can be created if the design parameters are correctly chosen

  8. Cleaner Production and Workplace Health and Safety: A combined approach. A case study from South Africa

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    Environmental goals may be pursued narrow-mindedly with no attention paid to the workplace. This book examines combined approaches in cleaner production projects. It explores two main avenues. First, integration into the project specification. The planning tools in use by assistance agencies......, integration of management systems is an option. A study on the South African Nosa 5-Star system refutes earlier criticism of dismal performance of top-down systems. It is argued that integration at this level is viable. For small companies, less formalistic approaches are required. ILO's network concept WISE...

  9. Radiation processing of agricultural products: status and potential contribution to a cleaner environment

    International Nuclear Information System (INIS)

    Lapidot, M.

    1979-01-01

    The current status of radiation processing of agricultural products is briefly reviewed with special regard to those processes which may contribute to a cleaner environment. Radurization of poultry feed and poultry meat is shown to be a major contributor to the reduction of a significant public health problem-salmonellosis. Radiation sterilized animal feeds can be produced by processing garbage - a major environmental pollutant. Radicidation and radappertization are effective processes in the treatment of sludges and waste water, to prevent pollution of seas or ground. Radiation processes can effectively replace fungicides and insecticides in the treatment of agricultural crops and thus reduce environmental pollution. (author)

  10. Inhaling Difluoroethane Computer Cleaner Resulting in Acute Kidney Injury and Chronic Kidney Disease

    Directory of Open Access Journals (Sweden)

    Kristen Calhoun

    2018-01-01

    Full Text Available Difluoroethane is the active ingredient in various computer cleaners and is increasingly abused by teenagers due to its ease of access, quick onset of euphoric effects, and lack of detectability on current urine drug screens. The substance has detrimental effects on various organ systems; however, its effects on the kidneys remain largely unreported. The following case report adds new information to the developing topic of acute kidney injury in patients abusing difluoroethane inhalants. In addition, it is one of the first to show a possible relationship between prolonged difluoroethane abuse and the development of chronic kidney disease in the absence of other predisposing risk factors.

  11. Jewelry cleaners

    Science.gov (United States)

    ... care professional. If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes. If the chemical was swallowed, immediately give the person water or milk, unless instructed otherwise by a health care provider.

  12. Analysis of the potentiality for implementing of the cleaner production and adopting a sustainable consumption in the Cuban entrepreneurial system

    International Nuclear Information System (INIS)

    Tortosa Ferrer, Barbara Ivette; Orue Valdes, Sonia; Mena Ulecia, Karel

    2007-01-01

    The world economic development has conduced to increase the worsening of the environment as result of the natural resources pollution. The tendency has been toward the unsustainable exploitation of natural resources, to increasing of the goods and services production, as well as, to elevated consumption. In this sense, many countries have planed environmental policies addressed to reducing of pollution introducing cleaner production practices and promoting the adoption of responsible consumption. This article shows the existing potentiality in a selected Cuban companies group for introducing and applying of the cleaner production, as well as, the adoption of a sustainable consumption start from analysis of the obtained results in short-term assessments (quick scans) carried out by the Cuban Environment Agency Focal Point of the National Cleaner Production Network in the period between 2004 and 2007

  13. The performance of cleaner wrasse, Labroides dimidiatus, in a reversal learning task varies across experimental paradigms

    Directory of Open Access Journals (Sweden)

    Simon Gingins

    2018-05-01

    Full Text Available Testing performance in controlled laboratory experiments is a powerful tool for understanding the extent and evolution of cognitive abilities in non-human animals. However, cognitive testing is prone to a number of potential biases, which, if unnoticed or unaccounted for, may affect the conclusions drawn. We examined whether slight modifications to the experimental procedure and apparatus used in a spatial task and reversal learning task affected performance outcomes in the bluestreak cleaner wrasse, Labroides dimidiatus (hereafter “cleaners”. Using two-alternative forced-choice tests, fish had to learn to associate a food reward with a side (left or right in their holding aquarium. Individuals were tested in one of four experimental treatments that differed slightly in procedure and/or physical set-up. Cleaners from all four treatment groups were equally able to solve the initial spatial task. However, groups differed in their ability to solve the reversal learning task: no individuals solved the reversal task when tested in small tanks with a transparent partition separating the two options, whereas over 50% of individuals solved the task when performed in a larger tank, or with an opaque partition. These results clearly show that seemingly insignificant details to the experimental set-up matter when testing performance in a spatial task and might significantly influence the outcome of experiments. These results echo previous calls for researchers to exercise caution when designing methodologies for cognition tasks to avoid misinterpretations.

  14. Impact of cleaner fuel use and improved stoves on acute respiratory infections: evidence from India.

    Science.gov (United States)

    Lamichhane, Prabhat; Sharma, Anurag; Mahal, Ajay

    2017-11-01

    The use of cleaner fuel and improved stoves has been promoted as a means to lower harmful emissions from solid fuels. However, little is known about how exclusive use of cleaner fuels, mixed fuel use and improved stoves influences children's health. We compared the impact of using liquefied petroleum gas (LPG) exclusively with mixed fuel use (LPG plus polluting fuels) and with exclusive use of polluting fuels on acute respiratory infections (ARI) among 16 157 children 0-4 years of age from households in the 2012 Indian Human Development Survey. Inverse probability weighting (IPW) procedures for multiple treatments were used for this evaluation. Children from households using LPG had a 5.0% lower probability of reporting ARI relative to exclusive users of polluting fuels, with larger effects (10.7%) in rural households. The probability of ARI in households using improved stoves and mixed fuel use was also lower in rural households, by 2.9% and 2.8%, respectively. The magnitude of effect varied across population subgroups, with the highest effects for children living in households living in kachha (low quality material) houses households identified as poor. Use of LPG and improved stoves lowered the probability of ARI among children younger than 5 years. © The Author 2017. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  15. Taxation on vehicle fuels: its impacts on switching to cleaner fuels

    International Nuclear Information System (INIS)

    Hung, W.-T.

    2006-01-01

    Vehicular consumption of fossil fuel contributes over 90% of air pollution in Hong Kong. A key strategy to improve Hong Kong's air quality is to discourage dirty fuels (e.g., leaded petrol and high-sulphur diesel) and to promote the use of clean fuels (e.g., low-sulphur diesel and liquefied petroleum gas (LPG)). This paper presents the empirical evidence on the effectiveness of the Government's clean fuel programs that offer tax subsidy to lower the consumption cost of such fuels. For the cases of unleaded petrol and ultra-low-sulphur diesel, lower fuel duties were offered so that the prices of these fuels were below those of leaded petrol and conventional diesel. Conventional petrol and diesel were phased out. In order to decide on the level of fuel duty concessions required to introduce LPG for taxis and bio-diesel for other vehicles, various Government-run trial programs were introduced to obtain cost estimates of using these alternative cleaner fuels. LPG using vehicles were subsequently exempted from the fuel duty in order to attract taxi and light bus operators to switch to LPG. It is apparent that the higher the subsidy, the faster is the rate at which switching to cleaner fuels takes place

  16. Cleaner production analysis in a company of the red ceramic segment

    Directory of Open Access Journals (Sweden)

    Dayanna dos Santos Costa Maciel

    2013-11-01

    Full Text Available The present study had as objective to analyze the productive process of a red ceramic segment industry in relation to the Cleaner Production (CP, based on the theoretical model proposed by National Center of Clean Technologies (CTNL, 2003b. As for the methodology, is classified as exploratory and descriptive, using the case study method. For this purpose, data was collected primary and secondary, the primers were obtained through semi-structured interviews with the owner and manager of production and a questionnaire administered to the owner. As for the secondary data, they were obtained through the company's environmental license, reports, documents, audits, standards and web searches, among others. As results were found in a waste around 10% of manufactured products (bricks, tiles and blocks;  Emission of pollutants such as ash and gases (CO2; High consumption of natural resources such as clay, water, electricity and firewood. This situation is being modified in the function of actions which are taken to obtain a cleaner production.

  17. Vocational training courses as an intervention on change of work practice among immigrant cleaners.

    Science.gov (United States)

    Jensen, Flemming W; Frydendall, Karen B; Flyvholm, Mari-Ann

    2011-11-01

    The aim of the study was to examine how knowledge and skills from vocational training courses on working techniques modified for immigrant cleaners are applied in practice and to identify factors that influence the implementation. The modifications of the standard course included language support with possibilities for translation and an extension of the duration of the course. The study is a prospective intervention study based on qualitative data. Data were collected as structured interviews and observations were carried out at the workplaces before and after the course. The study population included 31 immigrant cleaners from five different workplaces. Changes were observed in the use of working techniques (i.e., positioning of hands when using the floor mop). In some cases the use of the taught techniques was incorrect, partial, or only used part of the time. Interactions between individual factors (i.e., knowledge, awareness, capability, or work orientation) and environmental factors (i.e., equipment, time, workload, or physical surroundings) influenced the use of the techniques in practice. The course provided the participants with new working techniques through which some were able to reduce work related pain. However, with regard to incorrect and partial use of the working techniques, follow-up and post-training support is recommended. Copyright © 2011 Wiley Periodicals, Inc.

  18. 27 CFR 4.33 - Brand names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Brand names. 4.33 Section... THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE Labeling Requirements for Wine § 4.33 Brand names. (a) General. The product shall bear a brand name, except that if not sold under a brand name...

  19. Name fashion dynamics and social class

    NARCIS (Netherlands)

    Bloothooft, G.; Schraagen, M.P.

    2011-01-01

    Modern parents in The Netherlands choose the first names they like for their children. In this decision most follow fashion and as a typical property of fashion, many popular names now have a life cycle of only one generation. Some names show a symmetry between rise and fall of the name, but most

  20. A radiographic anthology of vertebral names

    International Nuclear Information System (INIS)

    Yochum, T.R.; Hartley, B.; Thomas, D.P.; Guebert, G.M.

    1987-01-01

    A total of 88 such named vertebrae have been extracted from the literature. With so many names from scattered sources, the authors collated them in a single presentation. A description is given and the anatomical and pathogenic reasons for the appearances are considered. A list of conditions associated with each named vertebra accompanies the descriptive paragraph. The named vertebrae are presented in alphabetical order

  1. Water resources protection today: end-of-pipe technology and cleaner production. Case study of the Czech Odra River watershed.

    Science.gov (United States)

    Chour, V

    2001-01-01

    This paper reports on integrated watershed-based protection and sustainable use of water resources to increase the effectiveness of water pollution abatement. The approach includes improvements in end-of-pipe waste-water treatment technologies and implementation of Cleaner Production (CP) principles and policies within the watershed. An example of the general effectiveness of this approach is illustrated by the Czech Odra River Cleaner Production Project where reductions in pollution were achieved with improved industrial production. The CP theme is worth considering as an important challenge for the IWA.

  2. Feeling-of-knowing for proper names.

    Science.gov (United States)

    Izaute, Marie; Chambres, Patrick; Larochelle, Serge

    2002-12-01

    The main objective of the presented study was to study feeling-of-knowing (FOK) in proper name retrieval. Many studies show that FOK can predict performance on a subsequent criterion test. Although feeling-of-knowing studies involve questions about proper names, none make this distinction between proper names and common names. Nevertheless, the specific character of proper names as a unique label referring to a person should allow participants to target precisely the desired verbal label. Our idea here was that the unique character of proper name information should result in more accurate FOK evaluations. In the experiment, participants evaluated feeling-of-knowing for proper and common name descriptions. The study demonstrates that FOK judgments are more accurate for proper names than for common names. The implications of the findings for proper names are briefly discussed in terms of feeling-of-knowing hypotheses.

  3. Medieval Karelian Calendar Names: A Cognitive Perspective

    Directory of Open Access Journals (Sweden)

    Irina A. Kyurshunova

    2013-11-01

    Full Text Available The article focuses on calendar personal names recorded in the 15–17th centuries Russian and Swedish manuscripts written in Karelia. Revealing the cognitive potential of this historical stratum of names, the author analyzes the frequency of full (official and modified forms of calendar names, the regional peculiarities of their linguistic adaptation, their ethnolinguisitic and social status, as well as the functioning of calendar names in the regional onomastic system. The analysis shows that the calendar onomasticon holds the leading positions, which reflects important axiological and mental shifts in the people’s culture. The list of most frequent Christian names of the region generally coincides with the onomastic data related to other Russian territories of the same period. The conservation of the name nomenclature is due to family traditions, namely, to familial practices of naming. However, the adaptation and distribution of names display some regional features, particularly in the frequency of different groups of anthroponyms. The peripheral situation of the region and the presence of Balto-Fennic population which adapted the Russian calendar athroponymicon determined the “conservatism” of the calendar names nomenclature: for naming, they selected the names which were better adapted and more extensively used among Russians. The formation of modified names depended mostly on the morphemic structure of the Russian language, regional features being relatively insignificant. The frequency of modified forms of names correlates with the genre of the manuscript and the scribe’s arbitrariness.

  4. CHARACTERIZATION OF OZONE EMISSIONS FROM AIR CLEANERS EQUIPPED WITH OZONE GENERATORS AND SENSOR AND FEEDBACK CONTROL CIRCUITRY

    Science.gov (United States)

    The paper give results of a characterization of ozone emissions from air cleaners equipped with ozone generators and sensor and feedback control circuitry. Ozone emission rates of several consumer appliances, marketed as indoor air treatment or air purification systems, were det...

  5. Energy access and transition to cleaner cooking fuels and technologies in Sri Lanka: Issues and policy limitations

    International Nuclear Information System (INIS)

    Wickramasinghe, Anoja

    2011-01-01

    Easy energy access is a trigger for human, social, and economic development. A research project was undertaken in Sri Lanka to broaden the understanding of human dimension of energy access and technologies. A questionnaire survey, covering 2269 households, gathered data on socio-economic contexts and issues influencing a transition towards clean cooking facilities. The findings reveal that the transition is impeded by four factors: the lack of motivation and the pressure for switching over to cleaner facilities, the lack of modern energy technology options, the financial risks, and the lack of financing and other support. The paper describes the delicate two-way interrelation between women earning wages and the transitions to cleaner cooking fuels and technologies. The findings suggest the need for a policy framework involving the stakeholders, financing and standardised technologies. To make a change it is proposed to introduce a national, integrated policy incorporating financing and energy governance. - Highlights: ► Households in Sri Lanka lack access to modern energy technology options for cooking. ► Cooking with fuel wood and residues is the norm in Sri Lanka, particularly in rural households. ► A survey of rural households revealed that most cannot afford to switch to cleaner cooking options. ► Most households have little awareness of the health impacts of biomass cooking. ► Women in regular formal employment are more likely to value cleaner cooking options that save time.

  6. IMPACT OF AN OZONE GENERATOR AIR CLEANER ON STYRENE CONCENTRATIONS IN AN INDOOR AIR QUALITY RESEARCH CHAMBER

    Science.gov (United States)

    The paper gives results of an investigation of the impact of an ozone generator air cleaner on vapor-phase styrene concentrations in a full-scale indoor air quality test chamber. The time history of the concentrations of styrene and ozone is well predicted by a simulation model u...

  7. Effects of 12 months aerobic exercise intervention on work ability, need for recovery, productivity and rating of exertion among cleaners

    DEFF Research Database (Denmark)

    Lidegaard, Mark; Søgaard, Karen; Krustrup, Peter

    2018-01-01

    PURPOSE: This study assessed the effects of a worksite aerobic exercise intervention among cleaners on: work ability, need for recovery, productivity, and rating of exertion. METHODS: In a monocentric randomised controlled trial in Denmark, 116, of 250 invited, cleaners were cluster-randomised (w......PURPOSE: This study assessed the effects of a worksite aerobic exercise intervention among cleaners on: work ability, need for recovery, productivity, and rating of exertion. METHODS: In a monocentric randomised controlled trial in Denmark, 116, of 250 invited, cleaners were cluster......-randomised (work location; sex; age; length of service) to aerobic exercise [N = 57, 44.9 years, 75.4% female, body mass index (BMI) 26.2], receiving 2 weekly aerobic exercise sessions during 12 months, or a reference group (N = 59, 45.7 years, 76.3% female, BMI 27.1), receiving health-promoting lectures. Self.......2) in the aerobic exercise group compared to the reference group. Productivity and rating of exertion were unaltered. Analysis stratified on age showed significant effects only among the participants aged ≤ 45 years. CONCLUSIONS: After 12 months work ability improved and need for recovery decreased. A period of 4...

  8. An experimental evaluation on air purification performance of Clean-Air Heat Pump (CAHP) air cleaner

    DEFF Research Database (Denmark)

    Sheng, Ying; Fang, Lei; Sun, Yuexia

    2018-01-01

    was 96.8%, which indicated that the most of gaseous pollutants were not accumulated in the CAHP. The regeneration temperature for the wheel could affect the air purification performance of CAHP. At 70 °C of regeneration temperature, the air-cleaning efficiency reached 96.7%. Up to 70% of the outdoor air......The escalation of energy consumption in buildings and heightened concerns about acceptable indoor air quality stimulate interest in the usage of air cleaner as an adjunct for indoor environmental conditioning. A regenerative desiccant wheel integrated into a ventilation system termed Clean-Air Heat...... Pump (CAHP) can improve the air quality during the process of dehumidification without using additional energy. An experimental study in a field lab was performed to investigate the air cleaning performance of CAHP. Photoacoustic gas analyzer-INNOVA was used to characterize chemical removal of indoor...

  9. Pollution prevention for cleaner air: EPA's air and energy engineering research laboratory

    International Nuclear Information System (INIS)

    Shaver, E.M.

    1992-01-01

    The article discusses the role of EPA's Air and Energy Engineering Research Laboratory (AEERL) in pollution prevention research for cleaner air. For more than 20 years, AEERL has been conducting research to identify control approaches for the pollutants and sources which contribute to air quality problems. The Laboratory has successfully developed and demonstrated cost-effective sulfur dioxide, nitrogen oxides, and particulate control technologies for fossil fuel combustion sources. More recently, it has expanded its research activities to include indoor air quality, radon, organic control, stratospheric ozone depletion, and global warming. AEERL also develops inventories of air emissions of many types. Over the last several years, it has made substantial efforts to expand research on pollution prevention as the preferred choice for air emissions reduction

  10. A randomised controlled trial among cleaners--effects on strength, balance and kinesiophobia

    DEFF Research Database (Denmark)

    Jørgensen, Marie Birk; Ektor-Andersen, John; Sjøgaard, Gisela

    2011-01-01

    , and kinesiophobia from CBTr. The improved strength, postural balance and kinesiophobia may improve the cleaners' tolerance for high physical work demands. Future studies should investigate the potential in the combination of PCT and CBTr in a workplace intervention. Current controlled trials ISRCTN96241850....... training (PCT, n = 95), Cognitive behavioural theory-based training (CBTr, n = 99) and Reference group (REF, n = 100). Interventions were conducted during work hours for an average of 1 hour/week. Muscle strength was measured by maximal voluntary contractions in trunk/extension, and shoulder abduction....../elevation. Postural balance was measured on a force platform. Kinesiophobia was measured with Tampa Scale for Kinesiophobia. Test and questionnaires were completed at baseline and at 3-month follow-up and analyses followed the intention-to-treat (ITT) principle with last observation carried forward in case of missing...

  11. Cardiorespiratory fitness, cardiovascular workload and risk factors among cleaners; a cluster randomized worksite intervention

    DEFF Research Database (Denmark)

    Korshøj, Mette; Krustrup, Peter; Jørgensen, Marie Birk

    2012-01-01

    . The clusters will be balanced on the following criteria: Geographical work location, gender, age and seniority. Cleaners are randomized to either I) a reference group, receiving lectures concerning healthy living, or II) an intervention group, performing worksite aerobic exercise. Data collection......ABSTRACT: BACKGROUND: Prevalence of cardiovascular risk factors is unevenly distributed among occupational groups. The working environment, as well as lifestyle and socioeconomic status contribute to the disparity and variation in prevalence of these risk factors. High physical work demands have...... been shown to increase the risk for cardiovascular disease and mortality, contrary to leisure time physical activity. High physical work demands in combination with a low cardiorespiratory fitness infer a high relative workload and an excessive risk for cardiovascular mortality. Therefore, the aim...

  12. Politics design of cleaner production in the electric sector for the energy scenarios of Colombia

    International Nuclear Information System (INIS)

    Figueroa P, Woody; Smith Q, Ricardo

    2001-01-01

    Cleaner production (PML) in Colombia has been implemented as an agreement of wills between the companies of different productive sectors and the Colombian environment ministry. In the electric sector, the agreement of PML has been implemented with successes and difficulties. A concern that exists today among the companies of the electric sector involved in the agreement is about its long-term viability. Supported in the planning tool of scenarios, an analysis of the possible futures of PML in the Colombian electric sector, using the energy scenarios for Colombia (UPME, 2000), is made. PML policies are designed that will allow to analyze its long-term implementation. This work seeks to contribute in the long-term analysis about the evolution and tendencies of PML in the Colombian electric sector, according with the markets dynamics, trends and competitiveness that are gaining space in the international community

  13. SOCIOLINGUISTIC IMPORT OF NAME-CLIPPING AMONG ...

    African Journals Online (AJOL)

    NGOZI

    2013-02-27

    Feb 27, 2013 ... experiences which, most of the times, encompass cultural and philosophical ... The art of name clipping goes way back in language history ... describes Akan names as “iconic representation of complete social variables that ...

  14. Saving oiled mangroves using a new non-dispersing shoreline cleaner

    International Nuclear Information System (INIS)

    Teas, H.J.; Lessard, R.R.; Canevari, G.P.; Brown, C.D.; Glenn, R.

    1993-01-01

    Mangroves are ranked as one of the most sensitive marine environments. If mangroves are oiled and no further action is taken, the probability of mortality to the trees is high. One of the ways that viscous spilled oil can kill mangroves is by covering the breathing ports, called lenticels (red mangroves) and pneumatophores (black mangroves), and asphyxiating them by preventing flow of oxygen from the atmosphere into the roots. Mangroves can also be killed by continuous inundation of their prop roots or pneumatophores for a period of ten days to two weeks, but they can survive lenticel covering by water for a few hours at high tide - so there appears to be some grace period during which lenticels can be nonfunctional and the plant can still survive once lenticel function is restored. This suggests that if oil is removed from the breathing ports during the early days after a spill, the lenticels may be able to restore oxygen delivery to the roots and spare the mangroves. Such oils are poorly removed by the washing of tidal waters or by water sprays alone. So a new shoreline cleaner (Corexit 9580), which was specially developed during the cleanup of the Valdez spill in Alaska, was tested to determine its ability to help loosen the oil so it can be washed away with water. Laboratory experiments using excised prop roots of red mangrove (Rhizophora mangle) were initially conducted to determine the feasibility of the approach. Subsequently experiments were carried out using about a hundred potted red mangroves at a test site in Florida. The prop roots, including the lenticels, were coated with a heavy oil (bunker C). After various periods of time, groups of oiled trees were treated with the shoreline cleaner to loosen and remove the oil deposit and then washed with seawater. The results showed that oiled trees could be saved by cleaning within seven days after oiling, indicating that the grace period after oiling extends for about one week

  15. Preservatives in Personal Hygiene and Cosmetic Products, Topical Medications, and Household Cleaners in Spain.

    Science.gov (United States)

    Pastor-Nieto, María Antonia; Alcántara-Nicolás, Francisco; Melgar-Molero, Virginia; Pérez-Mesonero, Raquel; Vergara-Sánchez, Aránzazu; Martín-Fuentes, Adriana; González-Muñoz, Patricia; de Eusebio-Murillo, Ester

    2017-10-01

    Preservatives are added to cosmetic, household cleaning, and other industrial products to prevent the growth of microorganisms. Unfortunately, exposure to these substances can cause sensitization. Between January and June 2015, we analyzed the ingredients of 2300 products commercially available in Spain to identify the frequency of a wide variety of preservatives in different product categories. We analyzed 1093 skin care and cosmetic products sold exclusively in pharmacies (dermocosmetics), 458 household cleaning and personal hygiene and cosmetic products sold in supermarkets, 636 topical medications, and 113 cosmetic products sold in a herbal shop. Phenoxyethanol, citric acid, sodium benzoate, and potassium sorbate were very common in all the cosmetic product categories. Parabens were present in 16.1% of dermocosmetic products, 14.45% of cosmetic products available in supermarkets, 0.88% of cosmetic products available in the herbal shop, 5.18% of topical medications, and in none of the cleaning products. Isothiazolinones were identified in 2.56% of dermocosmetic products, 18% of cosmetic products in supermarkets, 7.9% of cosmetic products in the herbal shop, 63.63% of household cleaners, and in none of the topical medications. Formaldehyde releasers were detected in 5.76% of dermocosmetic products, 6.42% of cosmetic products sold in supermarkets, 7.96% of cosmetic products sold in the herbal shop, 3.93% of topical medications, and 16.74% of household cleaners. Evaluation of the presence of preservatives in everyday products allows us to indirectly estimate exposure levels to each one. Measures restricting the use of the most problematic preservatives need to be strengthened. Copyright © 2017 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

  16. Identifying and Prioritizing Cleaner Production Strategies in Raw Materials’ Warehouse of Yazdbaf Textile Company in 2015

    Directory of Open Access Journals (Sweden)

    Mohammad Taghi Ghaneian

    2017-03-01

    Full Text Available Introduction: Cleaner productions in textile industry is achieved by reducing water and chemicals’ consumption, saving energy, reducing production of air pollution and solid wastes, reducing toxicity and noise pollution through many solutions. The purpose of the present research was to apply Strengths, Weaknesses, Opportunities, Threats (SWOT and Quality Systems Planning Matrix (QSPM techniques in identifying and prioritizing production in raw materials’ warehouse of Yazdbaf Textile Factory. Materials and Methods: In this research, effective internal and external factors in cleaner production were identified by providing the required information through field visit and interview with industry managers and supervisors of raw materials’ warehouse. Finally, To form matrix of internal and external factors 17 important internal factors and 7 important external factors were identified and selected respectively.Then, QSPM matrix was formed to determine the attractiveness and priority of the selected strategies by using results of internal and external factors and SWOT matrixes. Results: According to the results, the total score of raw materials’ warehouse in Internal Factor Evaluation (IFE matrix is equal to 2.90 which shows the good situation of warehouse than the internal factors. However, the total score in External Factor Evaluation (EFE matrix is 2.14 and indicates the relative weak situation of warehouse than the external factors. Conclusion: Based on the obtained results, continuity, monitor, and improvement of the general plan of qualitative control (QC of raw materials and laboratory as well as more emphasis on quality indexes according to its importance in the production processes were selected as the most important strategies. 

  17. Naming game with learning errors in communications

    OpenAIRE

    Lou, Yang; Chen, Guanrong

    2014-01-01

    Naming game simulates the process of naming an objective by a population of agents organized in a certain communication network topology. By pair-wise iterative interactions, the population reaches a consensus state asymptotically. In this paper, we study naming game with communication errors during pair-wise conversations, where errors are represented by error rates in a uniform probability distribution. First, a model of naming game with learning errors in communications (NGLE) is proposed....

  18. 27 CFR 19.165 - Trade names.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Trade names. 19.165 Section 19.165 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT... Trade names. (a) Operating permits. Where a trade name is to be used in connection with the operations...

  19. Once more the generic name Passerina Vieillot

    NARCIS (Netherlands)

    Oort, van E.D.

    1910-01-01

    The note on the generic name of the Snow-bunting by Dr. E. Hartert in this part of our periodical gives me cause to revert to the subject of my note on the generic name Passerina Vieillot and to state here, that I stand to what I have said about the rejection of this name in Zoology (Notes Leyden

  20. Towards proper name generation : A corpus analysis

    NARCIS (Netherlands)

    Castro Ferreira, Thiago; Wubben, Sander; Krahmer, Emiel

    We introduce a corpus for the study of proper name generation. The corpus consists of proper name references to people in webpages, extracted from the Wikilinks corpus. In our analyses, we aim to identify the different ways, in terms of length and form, in which a proper names are produced

  1. Resolving person names in web people search

    NARCIS (Netherlands)

    Balog, K.; Azzopardi, L.; de Rijke, M.; King, I.; Baeza-Yates, R.

    2009-01-01

    Disambiguating person names in a set of documents (such as a set of web pages returned in response to a person name) is a key task for the presentation of results and the automatic profiling of experts. With largely unstructured documents and an unknown number of people with the same name the

  2. Assigned value improves memory of proper names.

    Science.gov (United States)

    Festini, Sara B; Hartley, Alan A; Tauber, Sarah K; Rhodes, Matthew G

    2013-01-01

    Names are more difficult to remember than other personal information such as occupations. The current research examined the influence of assigned point value on memory and metamemory judgements for names and occupations to determine whether incentive can improve recall of proper names. In Experiment 1 participants studied face-name and face-occupation pairs assigned 1 or 10 points, made judgements of learning, and were given a cued recall test. High-value names were recalled more often than low-value names. However, recall of occupations was not influenced by value. In Experiment 2 meaningless nonwords were used for both names and occupations. The name difficulty disappeared, and value influenced recall of both names and occupations. Thus value similarly influenced names and occupations when meaningfulness was held constant. In Experiment 3 participants were required to use overt rote rehearsal for all items. Value did not boost recall of high-value names, suggesting that differential processing could not be implemented to improve memory. Thus incentives may improve memory for proper names by motivating people to engage in selective rehearsal and effortful elaborative processing.

  3. Color Naming Experiment in Mongolian Language

    Directory of Open Access Journals (Sweden)

    Nandin-Erdene Osorjamaa

    2015-11-01

    Full Text Available There are numerous researches on color terms and names in many languages. In Mongolian language there are few doctoral theses on color naming. Cross cultural studies of color naming have demonstrated Semantic relevance in French and Mongolian color name Gerlee Sh. (2000; Comparisons of color naming across English and Mongolian Uranchimeg B. (2004; Semantic comparison between Russian and Mongolian idioms Enhdelger O. (1996; across symbolism Dulam S. (2007 and few others. Also a few articles on color naming by some Mongolian scholars are Tsevel, Ya. (1947, Baldan, L. (1979, Bazarragchaa, M. (1997 and others. Color naming studies are not sufficiently studied in Modern Mongolian. Our research is considered to be the first intended research on color naming in Modern Mongolian, because it is one part of Ph.D dissertation on color naming. There are two color naming categories in Mongolian, basic color terms and non- basic color terms. There are seven basic color terms in Mongolian. This paper aims to consider how Mongolian color names are derived from basic colors by using psycholinguistics associative experiment. It maintains the students and researchers to acquire the specific understanding of the differences and similarities of color naming in Mongolian and  English languages from the psycho-linguistic aspect.

  4. The Private Legal Governance of Domain Names

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen

    2015-01-01

    . the UDRP (WIPO) and the Danish Complaints Board for Internet Domain Names (the Board) to discuss how and to what extent the domain name system balances interests between trademark owners and other users of domain names and secures the rule of law (legal certainty and predictability) with a special focus...

  5. Official Naming in Hå, Klepp and Time

    Directory of Open Access Journals (Sweden)

    Inge Særheim

    2012-08-01

    Full Text Available Toponyms localize, reflect and give information about historical traditions and various phenomena in an area. They form part of the local heritage and culture. The relationship between place names, heritage and identity is often underlined in guidelines regarding official naming of streets and roads. In what way is heritage and local identity reflected in the road names of the three municipalities Hå, Klepp and Time (Southwest-Norway, and how is the special character of this area expressed in the names? More than half of the official road names in the three municipalities are either identical with a local toponym, or they consist of a word for ‘road’ and a local toponym (or an appellative describing the location. This shows that there is a strong commitment to base the official naming on local tradition and thus contribute to identity. Quite a few elements from the dialect, e.g. special pronunciation, grammatical forms or local words, appear in the names, especially in the road names from Hå, reflecting that the names are part of the local culture, and due to the fact that the dialect is unique. Consistency is a challenge, however; the same word is sometimes spelled in different ways in different names. It appears that, with some exceptions, cultural heritage and local tradition have been preferred principles and guidelines with regard to naming of roads in the three municipalities, due to a consciousness that heritage and tradition create identity.

  6. Name signs in Danish Sign Language

    DEFF Research Database (Denmark)

    Bakken Jepsen, Julie

    2018-01-01

    in spoken languages, where a person working as a blacksmith by his friends might be referred to as ‘The Blacksmith’ (‘Here comes the Blacksmith!’) instead of using the person’s first name. Name signs are found not only in Danish Sign Language (DSL) but in most, if not all, sign languages studied to date....... This article provides examples of the creativity of the users of Danish Sign Language, including some of the processes in the use of metaphors, visual motivation and influence from Danish when name signs are created.......A name sign is a personal sign assigned to deaf, hearing impaired and hearing persons who enter the deaf community. The mouth action accompanying the sign reproduces all or part of the formal first name that the person has received by baptism or naming. Name signs can be compared to nicknames...

  7. On the History of the Name Ruslan

    Directory of Open Access Journals (Sweden)

    Roza Yu. Namitokova

    2016-12-01

    Full Text Available The authors postulate that there exists a common stock of Russian personal names resulting from a partial blending of national anthroponymicons. The main part of the paper focuses on the history of the personal name Ruslan which has etymological ties with the widespread Turkic name Arslan having the pre-onomastic meaning ‘lion’. The authors study the variation of the name in Russian folklore and in the 15th–17th centuries documents and historical sources. They also pay particular attention to the role of Pushkin’s poem Ruslan and Ludmila in the formation of the associative background of the studied name and to various onomastic derivatives, the latter include patronyms, surnames and the female name Ruslana. The author conclude that the name Ruslan became especially popular in Soviet and post-Soviet periods when it acquired a specific “semantic aura”, namely, in Caucasus where Ruslan became a kind of mark of Russian identity and, thus, contributed to the unification of the anthroponymic space. This conclusion was verified in the course of a survey done among 40 respondents representing different peoples of Caucasus. For most respondents the name has positive connotations and is associated with the Turkic name Arslan and the name of Pushkin’s character. However, some respondents consider it as a “non-Muslim”, Russian name and point out that it is often perceived as such outside Russia. The history of the name Ruslan and the ways of its transonymisation can be an interesting object for further research, especially due to the emergence of new communication technologies and onomastic discourses.

  8. China and Cleaner Coal. A marriage of necessity destined for failure?

    International Nuclear Information System (INIS)

    Seaman, John

    2012-04-01

    For China, coal is a crucial source of abundant, indigenous and affordable energy and is a pillar of economic and social stability. From a logic of energy security, and because the industry itself maintains a formidable political presence through the sheer fact of its history and size, this resource will continue to play a central role in the country's energy mix. But in order to respond to the growing need to reduce the burden of coal use on the environment and the Chinese population, and to prevent catastrophic climate change, both Chinese leaders and the industry itself have faced a certain reality - coal must become cleaner. This has led to a tenuous compromise between those in China advocating for the use of coal as a matter of economic necessity and social stability (security of supply, reliable and cheap electricity, and indigenous energy technologies) and those who strive for more environmentally sustainable growth (and thus emphasize 'clean' coal). The convergence of these two concepts has spurred a major shift towards newer, more efficient, though still highly polluting technologies - notably larger scale, hotter burning supercritical and ultra-supercritical coal-fired plants. But it has also spawned a number of demonstration-scale projects in various cutting-edge technologies to include coal gasification and carbon capture and storage (CCS), which promise vast improvements in CO_2 and other, toxic emissions if widely adopted. Indeed, mitigating climate change while continuing to rely heavily on coal will only be possible if carbon can successfully be captured and stored on a broad scale. The push to develop new coal technologies opens doors for both foreign and Chinese businesses to work together, potentially creating new market opportunities at home and abroad. Chinese companies can receive much-needed capital and expertise, while foreign companies and researchers are given the chance to test and develop technologies at a level of speed and scale that

  9. Parents accidentally substitute similar sounding sibling names more often than dissimilar names.

    Directory of Open Access Journals (Sweden)

    Zenzi M Griffin

    Full Text Available When parents select similar sounding names for their children, do they set themselves up for more speech errors in the future? Questionnaire data from 334 respondents suggest that they do. Respondents whose names shared initial or final sounds with a sibling's reported that their parents accidentally called them by the sibling's name more often than those without such name overlap. Having a sibling of the same gender, similar appearance, or similar age was also associated with more frequent name substitutions. Almost all other name substitutions by parents involved other family members and over 5% of respondents reported a parent substituting the name of a pet, which suggests a strong role for social and situational cues in retrieving personal names for direct address. To the extent that retrieval cues are shared with other people or animals, other names become available and may substitute for the intended name, particularly when names sound similar.

  10. Amerindian names of Colombian palms (Palmae

    Directory of Open Access Journals (Sweden)

    Diana Marmolejo

    2014-03-01

    Full Text Available A glossary of 1276 Amerindian names or name variants of palms is presented, representing at least 121 species in 64 aboriginal languages of Colombia. The species with documented names in the largest number of languages are Bactris gasipaes, Oenocarpus bataua, Mauritia flexuosa,Euterpe precatoria, andAstrocaryum chambira, which are five of the most used palms in South America. The languages with the largest number of named species are uitoto (48, tikuna (47, muinane (43, siona (34, sikuani (31 and miraña (30. These figures reflect the detailed studies carried out with these ethnic groups, besides the palm diversity of their territories and their knowledge about it. The names are presented in three separate lists –arranged by species, by language, and a global list of names that includes references for each individual record.

  11. Cleaner drive - Obstacles in the way of a market for a new generation of vehicles; Cleaner Drive. Hindernisse fuer die Markteinfuehrung von neuen Fahrzeug-Generationen. Bericht ueber die Beteiligung von e'mobile am EU-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Schwegler, U. [e' mobile, der Schweizerische Verband fuer elektrische und effiziente Strassenfahrzeuge, Berne (Switzerland); Domeniconi, R. [AssoVEL2, Mendrisio (Switzerland); Kaufmann, J. [Kaufmann Consulting, Berne (Switzerland); Werfeli, A. [Verband der Schweizerischen Gasindustrie, Zuerich (Switzerland)

    2004-07-01

    This final report for the Association of Swiss Traffic Engineers describes work done within the framework of the fifth European Research Framework Programme involving the development of tools to speed up the introduction of a new generations of vehicles. This report lists the work done by the Swiss e'mobil organisation and discusses the limitations placed on the work by its international framework. The report presents the 'Cleaner Drive' environmental evaluation methods used for vehicles. This considers greenhouse-gas emissions and external costs. Factors not considered, noise and bio-fuels, are mentioned. A data-base based decision-support tool is introduced. The development of the 'Cleaner Drive' web site is described. A further chapter takes a look at efforts being made in the area of filling stations for gaseous fuels.

  12. Gorlin-Goltz: what's in a name?

    LENUS (Irish Health Repository)

    McNamara, T

    1998-03-01

    This paper describes the clinical features of two very distinct syndromes with similar names: Gorlin-Goltz and Goltz-Gorlin Syndromes. A case report is presented that highlights the differences between these syndromes. To avoid errors in diagnosis because of the similarity in names, the authors caution that, based on additional information now available, the preferred names should be Focal Dermal Hypoplasia syndrome for Goltz-Gorlin syndrome and Nevoid Basal Cell Carcinoma syndrome for Gorlin-Goltz syndrome.

  13. Navy Ship Names: Background for Congress

    Science.gov (United States)

    2016-09-14

    Secretary considers these nominations , along with others he receives as well as his own thoughts in this matter. At appropriate times, he selects names...Research Service 16 “ nomination ” process is often fiercely contested as differing groups make the case that “their” ship name is the most fitting...and practices of the Navy for naming vessels of the Navy, and an explanation for such variances;  Assesses the feasibility and advisability of

  14. Enhanced Source Memory for Names of Cheaters

    OpenAIRE

    Raoul Bell; Axel Buchner

    2009-01-01

    The present experiment shows that source memory for names associated with a history of cheating is better than source memory for names associated with irrelevant or trustworthy behavior, whereas old-new discrimination is not affected by whether a name was associated with cheating. This data pattern closely replicates findings obtained in previous experiments using facial stimuli, thus demonstrating that enhanced source memory for cheaters is not due to a cheater-detection module closely tied ...

  15. A radiographic anthology of vertebral names.

    Science.gov (United States)

    Yochum, T R; Hartley, B; Thomas, D P; Guebert, G M

    1985-06-01

    There are many conditions of the spine to which various authors have applied descriptive names. This paper, an extensive review of the literature, provides the first complete source for such named vertebrae. Included are 88 names covering all categories of bone disease. A brief description of the radiographic appearance and its pathogenesis is provided for each, along with a consideration of the disease processes which may produce the appearance.

  16. Can Your Institution's Name Influence Constituent Response? An Initial Assessment of Consumer Response to College Names.

    Science.gov (United States)

    Treadwell, D. F.

    2003-01-01

    Presents names of college and universities unfamiliar to potential students. Finds that one cluster of respondents had a clear preference for geographic or aspirational names while a second cluster had a preference for proper names. Notes that there was an overall preference for proper names. (SG)

  17. Separate and unsanitary: African American women railroad car cleaners and the Women's Service Section, 1918-1920.

    Science.gov (United States)

    Muhammad, Robin Dearmon

    2011-01-01

    The Women's Service Section (WSS) investigated federally controlled railroad stations and yards at the end of World War I. Few women worked in car cleaning before the war, and railroad management preferred to block women workers, especially African Americans, from gaining any kind of foothold in railroad work. African American women were the single largest group of railroad car cleaners during this period but they were routinely denied adequate facilities, including toilets, locker rooms, and dining facilities throughout the railroad system. By raising the issues of facilities, workers' rights, and public health, these women shaped federal policy and widened the agenda of the WSS to include a direct attack on segregated workplaces. This article argues that African American women car cleaners launched an industrial campaign that wove together concerns about racism, sexism, and health issues, and successfully removed barriers to women working in a predominately male industry.

  18. Strategies to overcome barriers for cleaner generation technologies in small developing power systems: Sri Lanka case study

    International Nuclear Information System (INIS)

    Wijayatunga, Priyantha D.C.; Siriwardena, Kanchana; Fernando, W.J.L.S.; Shrestha, Ram M.; Attalage, Rahula A.

    2006-01-01

    The penetration of cleaner and energy efficient technologies in small power systems such as the one in Sri Lanka has encountered many problems. This has caused major concerns among the policy makers, mainly in the context of the growing need to reduce harmful emissions in the electricity supply industry from the point of view of both local environmental pollution as well as the global warming concerns. This paper presents the outcome of a study involved in identifying and ranking the barriers to the promotion of cleaner and energy efficient technologies and strategies to overcome these barriers in Sri Lanka. Barriers for renewable energy based systems such as wind and wood fuel fired plants (dendro thermal power) and cleaner technologies such as liquefied natural gas (LNG) fired combined cycle and IGCC (coal) were identified based on a survey. A direct assessment multi-criteria decision making method called Analytic Hierarchy Process (AHP) was used to rank the barriers. The most effective strategies are proposed to address the three major barriers for each of these technologies based on extensive discussions with all the stakeholders in the electricity industry. It was found that lack of financing instruments, high initial cost and lack of assurance of resource supply or availability are the main barriers for renewable technologies. As for cleaner fuel and technology options associated with conventional generation systems, the lack of a clear government policy, uncertainty of fuel supplies and their prices and the reliability of the technologies themselves are the major barriers. Strategies are identified to overcome the above barriers. Establishment of a proper feed in tariff, geographical diversification of installations and capacity building in commercial banks are suggested for wind power. Investment incentives, streamlining of wood production and research on site identification are proposed for wood fuel fired plants. Also the study suggests delayed

  19. Acute effect on ambulatory blood pressure from aerobic exercise: a randomised cross-over study among female cleaners.

    Science.gov (United States)

    Lund Rasmussen, Charlotte; Nielsen, Line; Linander Henriksen, Marie; Søgaard, Karen; Krustrup, Peter; Holtermann, Andreas; Korshøj, Mette

    2018-02-01

    High occupational physical activity (OPA) is shown to increase the risk for elevated blood pressure, cardiovascular diseases and mortality. Conversely, aerobic exercise acutely lowers the blood pressure up to 25 h post exercise. However, it is unknown if this beneficial effect also apply for workers exposed to high levels of OPA. Cleaners constitute a relevant occupational group for this investigation because of a high prevalence of OPA and cardiovascular disease. Accordingly, the objective was to investigate the acute effects on ambulatory blood pressure from a single aerobic exercise session among female cleaners. Twenty-two female cleaners were randomised to a cross-over study with a reference and an aerobic exercise session. Differences in 24-h, work hours, leisure time, and sleep ambulatory blood pressure (ABP) were evaluated using repeated measure 2 × 2 mixed-models. After the aerobic exercise session, the 24-h systolic ambulatory blood pressure was significantly lowered by 2.4 mmHg (p ABP was unaltered. During work hours, a lowered systolic ABP of 2.2 mmHg (p = 0.02) and a higher diastolic ABP of 1.5 mmHg (p = 0.03) were found after the aerobic exercise session. During leisure time, the systolic ABP was lowered by 1.7 mmHg (p = 0.04) and the diastolic ABP was unaltered. During sleep, the systolic and diastolic ABP was unaltered. A single aerobic exercise session lowered 24-h systolic ABP of 2.4 mmHg. Thus, an aerobic exercise session seems to be beneficial for lowering the risk of hypertension among cleaners.

  20. Ocean cleaning stations under a changing climate: biological responses of tropical and temperate fish-cleaner shrimp to global warming.

    Science.gov (United States)

    Rosa, Rui; Lopes, Ana Rita; Pimentel, Marta; Faleiro, Filipa; Baptista, Miguel; Trübenbach, Katja; Narciso, Luis; Dionísio, Gisela; Pegado, Maria Rita; Repolho, Tiago; Calado, Ricardo; Diniz, Mário

    2014-10-01

    Cleaning symbioses play an important role in the health of certain coastal marine communities. These interspecific associations often occur at specific sites (cleaning stations) where a cleaner organism (commonly a fish or shrimp) removes ectoparasites/damaged tissue from a 'client' (a larger cooperating fish). At present, the potential impact of climate change on the fitness of cleaner organisms remains unknown. This study investigated the physiological and biochemical responses of tropical (Lysmata amboinensis) and temperate (L. seticaudata) cleaner shrimp to global warming. Specifically, thermal limits (CTMax), metabolic rates, thermal sensitivity, heat shock response (HSR), lipid peroxidation [malondialdehyde (MDA) concentration], lactate levels, antioxidant (GST, SOD and catalase) and digestive enzyme activities (trypsin and alkaline phosphatase) at current and warming (+3 °C) temperature conditions. In contrast to the temperate species, CTMax values decreased significantly from current (24-27 °C) to warming temperature conditions (30 °C) for the tropical shrimp, where metabolic thermal sensitivity was affected and the HSR was significantly reduced. MDA levels in tropical shrimp increased dramatically, indicating extreme cellular lipid peroxidation, which was not observed in the temperate shrimp. Lactate levels, GST and SOD activities were significantly enhanced within the muscle tissue of the tropical species. Digestive enzyme activities in the hepatopancreas of both species were significantly decreased by warmer temperatures. Our data suggest that the tropical cleaner shrimp will be more vulnerable to global warming than the temperate Lysmata seticaudata; the latter evolved in a relatively unstable environment with seasonal thermal variations that may have conferred greater adaptive plasticity. Thus, tropical cleaning symbioses may be challenged at a greater degree by warming-related anthropogenic forcing, with potential cascading effects on the health

  1. Pen- Name in Persian and Arabic Poetry

    Directory of Open Access Journals (Sweden)

    Ebrahim Khodayar

    2012-03-01

    Full Text Available  Abstract Pen-name (Takhalloss is one of the main features of Persian poetry. It has been a matter of concern among many of Persian language geography poets in the orient at least up to the Mashrouteh era. Pen-name has been promoted among the other Muslim nations throuph Persian poetry. Although it is not as famous in the Arab nations as in the Persian speaking nations, it is known as “Alqab-o-shoara” among the Arab nations and, through this way, it has affected the poetrical wealth of the Arabic poets.   The Present paper, using description-analystic approach, compares the pen-names of Persian and Arabic poets under the title of “pen-names” and investigates their features in both cultures. The main research question is: What are the similarities and differences of poetic-names, in Persian and Arabic poets in terms of the type of name, position and importance? The results showed that Pseudonym by its amazing expansion in Persian poetry has also influenced Arabic poetry. In addition to the factors affecting in the choice of pen-names (like pseudonym, pen-name, nickname..., sometimes such external factors as events, commends, community benefactors and climate, as well as internal factors including the poets’ inner beliefs are associated too. .

  2. Enhancing Communication through Gesture and Naming Therapy

    Science.gov (United States)

    Caute, Anna; Pring, Tim; Cocks, Naomi; Cruice, Madeline; Best, Wendy; Marshall, Jane

    2013-01-01

    Purpose: In this study, the authors investigated whether gesture, naming, and strategic treatment improved the communication skills of 14 people with severe aphasia. Method: All participants received 15 hr of gesture and naming treatment (reported in a companion article [Marshall et al., 2012]). Half the group received a further 15 hr of strategic…

  3. In the Names of Chinese Women.

    Science.gov (United States)

    Lee, Wen Shu

    1998-01-01

    Contributes to both feminist scholarship and Chinese Studies by coming to grips with the deep, culturally embedded, and politically significant meaning of the names given to Chinese women. Uses the analysis of two names to advance theory that will link and enrich rhetorical, feminist, and intercultural studies and break through the limits of…

  4. MILITARY NAMES IN SOUTH AFRICA - QUO VADIS?

    African Journals Online (AJOL)

    pride and unit traditions. After the war and the subsequent demobilisation of the UDF the procedures for naming were described and certain require- ments laid down. During the term of office of the Minister of Defence at the time, F.C. Erasmus,the following proce- dure for naming was promulgated - a procedure that has not ...

  5. Semantic category interference in overt picture naming

    NARCIS (Netherlands)

    Maess, B.; Friederici, A.D.; Damian, M.F.; Meyer, A.S.; Levelt, W.J.M.

    2002-01-01

    The study investigated the neuronal basis of the retrieval of words from the mental lexicon. The semantic category interference effect was used to locate lexical retrieval processes in time and space. This effect reflects the finding that, for overt naming, volunteers are slower when naming pictures

  6. 32 CFR 635.6 - Name checks.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Name checks. 635.6 Section 635.6 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS LAW ENFORCEMENT REPORTING Records Administration § 635.6 Name checks. (a) Information contained in military police records may be...

  7. Towards secure name resolution on the internet

    NARCIS (Netherlands)

    Grothoff, C.; Wachs, M.; Ermert, M.; Appelbaum, J.

    2018-01-01

    The Domain Name System (DNS) provides crucial name resolution functions for most Internet services. As a result, DNS traffic provides an important attack vector for spy agencies, as demonstrated by the QUANTUMDNS and MORECOWBELL programs of the NSA. This article reviews how DNS works, and explains

  8. Sudden death involving inhalation of 1,1-difluoroethane (HFC-152a) with spray cleaner: three case reports.

    Science.gov (United States)

    Sakai, Kentaro; Maruyama-Maebashi, Kyoko; Takatsu, Akihiro; Fukui, Kenji; Nagai, Tomonori; Aoyagi, Miwako; Ochiai, Eriko; Iwadate, Kimiharu

    2011-03-20

    Spray cleaner is a cleaning product containing compressed 1,1-difluoroethane (HFC-152a) to blow dust off electric devices and other sensitive equipment; however, it is also inhaled to induce euphoria. This report describes three cases of death involving HFC-152a inhalation with spray cleaner under different circumstances. In case 1, death was during inhalation for euphoria with which led to having frostbite. In case 2, death may have been associated with suicidal intention. Case 3 was also considered an accidental autoerotic death. In all three cases, HFC-152a was detected at 99.2-136.2mg/l in blood samples, 94.5-191.9 mg/l in urine samples and 3.6-18.4 mg in the gastric contents according to gas chromatography with flame ionization detection. To prevent death associated with HFC-152a inhalation from spray cleaner, the danger of the sudden death should be announced to people, given the ready availability of commercial products containing HFC-152a. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  9. Cleaner bioprocesses for promoting zero-emission biofuels production in Vojvodina

    Energy Technology Data Exchange (ETDEWEB)

    Dodic, Sinisa N.; Vucurovic, Damjan G.; Popov, Stevan D.; Dodic, Jelena M.; Rankovic, Jovana A. [Department of Biotechnology and Pharmaceutical Engineering, Faculty of Technology, University of Novi Sad, Bul. cara Lazara 1, Novi Sad 21000, Vojvodina (RS)

    2010-12-15

    In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe. Vojvodina is an energy-deficient province. The incentives to invest human and financial resources in the research and development of cleaner bioprocesses are high, considering the benefits which might be achieved in terms of environment protection and manufacturing costs. In the near and medium tenu, the development of bioprocesses for waste recycling and resource recovery might be one of the most viable options, considering much research work has already been done. In Vojvodina, there are technological solutions that biofuels produced in a closed cycle, so that the quantity of waste reduced to a minimum. These solutions include the stillage (remainder after distillation) used for fattening cattle, and cattle excrement to produce biogas and manure as fertilizer. The energy required for the production of bioethanol is obtained combustion lignocelullose residual waste from the production of basic raw materials starch, or biogas. Ash from the burned biomass returned to soil as a source of minerals for plants and replacement of mineral fertilizer. Such a closed cycle is economical for small farms in Vojvodina. (author)

  10. Cleaner bioprocesses for promoting zero-emission biofuels production in Vojvodina

    International Nuclear Information System (INIS)

    Dodic, Sinisa N.; Vucurovic, Damjan G.; Popov, Stevan D.; Dodic, Jelena M.; Rankovic, Jovana A.

    2010-01-01

    In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe. Vojvodina is an energy-deficient province. The incentives to invest human and financial resources in the research and development of cleaner bioprocesses are high, considering the benefits which might be achieved in terms of environment protection and manufacturing costs. In the near and medium tenu, the development of bioprocesses for waste recycling and resource recovery might be one of the most viable options, considering much research work has already been done. In Vojvodina, there are technological solutions that biofuels produced in a closed cycle, so that the quantity of waste reduced to a minimum. These solutions include the stillage (remainder after distillation) used for fattening cattle, and cattle excrement to produce biogas and manure as fertilizer. The energy required for the production of bioethanol is obtained combustion lignocelullose residual waste from the production of basic raw materials starch, or biogas. Ash from the burned biomass returned to soil as a source of minerals for plants and replacement of mineral fertilizer. Such a closed cycle is economical for small farms in Vojvodina. (author)

  11. The theory of inventive problem solving integrated to the cleaner production: theoretical approach

    Directory of Open Access Journals (Sweden)

    Flávio Issao Kubota

    2013-03-01

    Full Text Available Efforts towards to reduction of environmental impact by enterprises are a solving problem process, which often need inventive solutions that generate environmental, technical and economic benefits. Hence, this research aimed to verify, through literature, and discuss the Theory of Inventive Problem Solving (TRIZ integration to cleaner production (CP strategies, in order to structure a new methodology for inventive solutions focused on reduction of effluents, waste and emissions. To perform this study, we proceeded a qualitative and descriptive research, with documentary data collection strategy. The results show predominance of CP level 1 researches, with greater focus on product improvement, a smaller quantity of process modification studies (level 1 and internal recycling (level 2, and no evidence of TRIZ utilization was obtained on level 3 (external recycling and biogenic cycles. The proposed integration is promising, since both methodologies aim ideal situation and problems’ reduction. At the end, opportunities were detected for application of TRIZ in production processes, by means of functional analysis and Ideal Final Result (IFR, being possible to direct teams towards optimization of technical systems.

  12. Skeletal Fluorosis Due To Inhalation Abuse of a Difluoroethane-Containing Computer Cleaner.

    Science.gov (United States)

    Tucci, Joseph R; Whitford, Gary M; McAlister, William H; Novack, Deborah V; Mumm, Steven; Keaveny, Tony M; Whyte, Michael P

    2017-01-01

    Skeletal fluorosis (SF) is endemic in many countries and millions of people are affected worldwide, whereas in the United States SF is rare with occasional descriptions of unique cases. We report a 28-year-old American man who was healthy until 2 years earlier when he gradually experienced difficulty walking and an abnormal gait, left hip pain, loss of mobility in his right wrist and forearm, and progressive deformities including enlargement of the digits of both hands. Dual-energy X-ray absorptiometry (DXA) of his lumbar spine, femoral neck, total hip, and the one-third forearm revealed bone mineral density (BMD) Z-scores of +6.2, +4.8, +3.0, and -0.2, respectively. Serum, urine, and bone fluoride levels were all elevated and ultimately explained by chronic sniffing abuse of a computer cleaner containing 1,1-difluoroethane. Our findings reflect SF due to the unusual cause of inhalation abuse of difluoroethane. Because this practice seems widespread, particularly in the young, there may be many more such cases. © 2016 American Society for Bone and Mineral Research. © 2016 American Society for Bone and Mineral Research.

  13. Application of cleaner production tools and failure modes and effects analysis in pig slaughterhourses

    Directory of Open Access Journals (Sweden)

    J. M. Fonseca

    2017-07-01

    Full Text Available Cleaner production programs (CP and Failure Modes and Effects Analysis (FMEA are tools used to improve the sustainability of industries, ensuring greater profitability, quality, reliability and safety of their products and services. The meat industry is among the most polluting industries because of the large amounts of organic waste produced during meat processing. The objective of this study was to combine the CP and FMEA tools and to apply them in a pig slaughterhouse in order to detect critical points along the production chain that have a major environmental impact and to establish corrective and preventive actions that could minimize these problems. The results showed that water is the most consumed resource by the industry and also the main producer of waste due to microbiological contamination with animal feces and blood and meat residues. All impacts were found to be real due to their daily occurrence in the industry. Their severity, occurrence, detection and coverage were classified as moderate and high, high, low and moderate, and moderate and high, respectively. The application of the CP and FMEA tools was efficient in identifying and evaluating the environmental impacts caused by the slaughter and processing of pork carcasses. Liquid slaughter effluents and solid wastes (blood and bones are the factors that pose the greatest risks to the environment. The substitution of treatment plant chemicals with decomposing microorganisms, composting, and the production of animal meal and feed from solid waste are appropriate measures the industry could adopt to minimize the contamination of water resources and soil.

  14. Optical design and suspension system of the KAGRA output mode-cleaner

    Science.gov (United States)

    Kasuya, Junko; Winterflood, John; Li, Ju; Somiya, Kentaro

    2018-02-01

    KAGRA is a Japanese large scale, underground, cryogenic gravitational telescope which is under construction in the Kamioka mine. For using cryogenic test masses, the sensitivity of KAGRA is limited mainly by quantum noise. In order to reduce quantum noise, KAGRA employs an output mode-cleaner (OMC) at the output port that filters out junk light but allows the gravitational wave signal to go through. The requirement of the KAGRA OMC is even more challenging than other telescopes in the world since KAGRA plans to tune the signal readout phase so that the signal-to-noise ratio for our primary target source can be maximized. A proper selection of optical parameters and anti-vibration devices is required for the robust operation of the OMC. In this proceeding, we show our final results of modal-model simulations, in which we downselected the cavity length, the round-trip Gouy phase shift, the finesse, and the seismic isolation ratio for the suspended optics.

  15. Water Quality Improvement of Media Culture for Tilapia (Oreochromis niloticus) with Cleaner Production Method

    Science.gov (United States)

    Haeruddin; Supriharyono; Febrianto, S.

    2018-02-01

    The tilapia (Oreochromis niloticus), is known as a high adaptability and brackish water tolerance fish. This fish is also has a meat with high protein content, that ranges about 65 -75%. Generally the tilapia is cultured using a conventional system with high density. It is caused degradation of water quality of media culture, and finally increase mortality rate of fish cultured. The application of tilapia cultivation with cleaner production method by giving enzyme into the feed to upgrade the efficiency of feed utilization, presumed that could improve the water quality of cultivation media. It is due to the lower of feed and feces residues. Therefore the concentration of toxic compounds, such as ammonia, nitrite and sulfide, will be lower. The experiments were conducted for 35 days with a completely factorial randomized design. The first factor was the dosage of enzyme in the feed, consisting of 4 dosages, and the second factor was the duration of the test fish maintenance (5 weeks). Water quality variables examined included ammonia, nitrite and sulfide. The results showed that enzyme dosage had no significantly impact on ammonia, nitrite and sulfide concentrations in the test media culture. However, the feeding with enzyme in low dosage, resulted less concentration of ammonia, nitrite and sulfide than it was without enzyme). The duration of fish cultured has significantly effect on the concentration of ammonia, nitrite and sulfide in the test media. While it is no significantly correlation between dosage and duration of maintenance.

  16. Cleaner fuels for ships provide public health benefits with climate tradeoffs.

    Science.gov (United States)

    Sofiev, Mikhail; Winebrake, James J; Johansson, Lasse; Carr, Edward W; Prank, Marje; Soares, Joana; Vira, Julius; Kouznetsov, Rostislav; Jalkanen, Jukka-Pekka; Corbett, James J

    2018-02-06

    We evaluate public health and climate impacts of low-sulphur fuels in global shipping. Using high-resolution emissions inventories, integrated atmospheric models, and health risk functions, we assess ship-related PM 2.5 pollution impacts in 2020 with and without the use of low-sulphur fuels. Cleaner marine fuels will reduce ship-related premature mortality and morbidity by 34 and 54%, respectively, representing a ~ 2.6% global reduction in PM 2.5 cardiovascular and lung cancer deaths and a ~3.6% global reduction in childhood asthma. Despite these reductions, low-sulphur marine fuels will still account for ~250k deaths and ~6.4 M childhood asthma cases annually, and more stringent standards beyond 2020 may provide additional health benefits. Lower sulphur fuels also reduce radiative cooling from ship aerosols by ~80%, equating to a ~3% increase in current estimates of total anthropogenic forcing. Therefore, stronger international shipping policies may need to achieve climate and health targets by jointly reducing greenhouse gases and air pollution.

  17. Rancang Bangun Vacuum Cleaner Dengan Pengendali Nirkabel Menggunakan Modul Rf Data Transceiver Ys-1020ub Berbasis Mikrokontroler At89s52

    Directory of Open Access Journals (Sweden)

    IGAP Raka Agung

    2012-12-01

    Full Text Available Kebersihan merupakan hal yang sangat penting untuk menjaga kesehatan kita, khususnya kebersihan rumah. Rumah yang bersih sangat mempengaruhi kesehatan para penghuninya. Debu adalah kotoran yang paling sering mengotori rumah kita terutama pada bagian lantai. Setiap hari kita harus membersihkan rumah dari debu yang ada pada lantai untuk menjaga kebersihan sekaligus kesehatan kita. Dalam membersihkan lantai rumah dari  debu sering menyita banyak waktu dan tenaga. Vacuum cleaner terkendali nirkabel menggunakan Modul RF Data Transceiver YS-1020UB berbasis mikrokontroler AT89S52 merupakan salah satu solusi untuk membersihkan lantai rumah dari kotoran debu.  Vacuum cleaner ini menggunakan enam buah motor DC yaitu dua motor DC penyedot debu, dua motor DC penentu arah maju, mundur, belok kanan, dan belok kiri, serta dua motor DC penentu arah geser kanan dan geser kiri.  Vacuum cleaner ini dapat dikendalikan dengan dua mode operasi yaitu mode manual dan otomatis. Pada mode manual vacuum cleaner ini dikendalikan menggunakan remote control, dengan tranmisi nirkabel memakai transceiver YS-1020UB. Sedangkan pada mode otomatis  vacuum cleaner ini menggunakan empat buah sensor jarak untuk menghindari tabrakan pada dinding.  Vacuum cleaner dengan pengendali nirkabel menggunakan modul RF Data Transceiver YS-1020UB berbasis mikrokontroler AT89S52 sudah bisa membersihkan debu lantai sehingga lantai bersih dari debu.

  18. Domain learning naming game for color categorization.

    Science.gov (United States)

    Li, Doujie; Fan, Zhongyan; Tang, Wallace K S

    2017-01-01

    Naming game simulates the evolution of vocabulary in a population of agents. Through pairwise interactions in the games, agents acquire a set of vocabulary in their memory for object naming. The existing model confines to a one-to-one mapping between a name and an object. Focus is usually put onto name consensus in the population rather than knowledge learning in agents, and hence simple learning model is usually adopted. However, the cognition system of human being is much more complex and knowledge is usually presented in a complicated form. Therefore, in this work, we extend the agent learning model and design a new game to incorporate domain learning, which is essential for more complicated form of knowledge. In particular, we demonstrate the evolution of color categorization and naming in a population of agents. We incorporate the human perceptive model into the agents and introduce two new concepts, namely subjective perception and subliminal stimulation, in domain learning. Simulation results show that, even without any supervision or pre-requisition, a consensus of a color naming system can be reached in a population solely via the interactions. Our work confirms the importance of society interactions in color categorization, which is a long debate topic in human cognition. Moreover, our work also demonstrates the possibility of cognitive system development in autonomous intelligent agents.

  19. Precedent Names of Chinese National Culture

    Directory of Open Access Journals (Sweden)

    Валентина Алексеевна Ленинцева

    2015-12-01

    Full Text Available The article presents an analysis of precedent names as symbols of precedent phenomena in the material and spiritual culture of the Chinese. An evaluation of daily events and the attitude of the Chinese towards the world are reflected in the vocabulary of their language. The symbols of precedent phenomena can be proper names (anthroponomy, names of places, the date, as well as figurative and expressive means of language (idioms, sayings. Precedent names as symbols of precedent phenomena vividly and accurately capture the above-mentioned points, and encompass almost all spheres of life, history and spiritual development. The subject of our study are national precedent phenomena that define the ethno-cultural specificity, reflecting the history and culture of the Chinese people and their national character. Representatives of different cultures have different perceptions of the same precedent phenomena. Inadequate understanding of national invariants of precedent phenomena is often the source of communication failures. The aim of this paper is to highlight precedent names as a symbol of precedent phenomena in the discourse of the Chinese linguocultural community. For this purpose a classification of precedent names in Chinese was carried out. Precedent names which play an important role in shaping the Chinese national consciousness were taken from the Chinese-Russian Dictionary.

  20. Changing the Family Name by Administrative Means

    Directory of Open Access Journals (Sweden)

    Duret Nicu

    2009-06-01

    Full Text Available In the Roman law, changing the name was possible except for the case in which this changewould have been fraudulent. This possibility was kept also in the Middle Age but with some restrictions:the handicraftsmen were not allowed to change their name when it served as a factory brand, the notarycould not change his name without having an authorization, and neither could he change his normalsignature. Gradually, the monarchy increased its control in this matter, tending to transform a socialinstitution into a police one.

  1. Origin names of gochu, kimchi, and bibimbap

    Directory of Open Access Journals (Sweden)

    Hye-Jeong Yang

    2015-12-01

    Conclusion: Gochu, kimchi, and bibimbap have thousands of years of history and have been called with pure Korean name words. It was only that they were recorded in the form of hanja during the time written Korean was undervalued where people insisted borrowing Chinese characters to write despite written Korean being available. Thus, gocho (苦椒, chimchae (沈菜, and koldonban (滑董飯 are not the origin names. The pure Korean names used even by the people back then are the actual ones: gochyo (고쵸, dimchae (딤, and bubuimbap (부뷤밥.

  2. Enhanced Source Memory for Names of Cheaters

    Directory of Open Access Journals (Sweden)

    Raoul Bell

    2009-04-01

    Full Text Available The present experiment shows that source memory for names associated with a history of cheating is better than source memory for names associated with irrelevant or trustworthy behavior, whereas old-new discrimination is not affected by whether a name was associated with cheating. This data pattern closely replicates findings obtained in previous experiments using facial stimuli, thus demonstrating that enhanced source memory for cheaters is not due to a cheater-detection module closely tied to the face processing system, but is rather due to a more general bias towards remembering the source of information associated with cheating.

  3. What’s in a Name? – Consequences of Naming Non-Human Animals

    DEFF Research Database (Denmark)

    Borkfelt, Sune

    2011-01-01

    have consequences for the way we think about animals (human and non-human), peoples, species, places, things etc. Through a blend of history, philosophy and representational theory—and using examples from, among other things, the Bible, Martin Luther, colonialism/imperialism and contemporary ways......The act of naming is among the most basic actions of language. Indeed, it is naming something that enables us to communicate about it in specific terms, whether the object named is human or non-human, animate or inanimate. However, naming is not as uncomplicated as we may usually think and names...... of keeping and regarding non-human animals—this paper attempts to trace the importance of (both specific and generic) naming to our relationships with the non-human. It explores this topic from the naming of the animals in Genesis to the names given and used by scientists, keepers of companion animals, media...

  4. Geographic Names Information System (GNIS) Structures

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  5. Geographic Names Information System (GNIS) Historical Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  6. Geographic Names Information System (GNIS) Admin Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  7. Geographic Names Information System (GNIS) Hydrography Lines

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  8. Geographic Names Information System (GNIS) Cultural Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  9. Geographic Names Information System (GNIS) Landform Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  10. Geographic Names Information System (GNIS) Hydrography Points

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  11. Geographic Names Information System (GNIS) Community Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  12. Geographic Names Information System (GNIS) Transportation Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  13. The change of religion and the names

    Directory of Open Access Journals (Sweden)

    John Kousgård Sørensen

    1990-01-01

    Full Text Available What actually happened at the time when Denmark was christianized? An important viewpoint to the topic is the nomenclature, both personal names and place-names. What happened to these in the missionary period? Can they be exploited as evidence about the change of religion? What happened to these and to the naming practices in connection with the introduction of Christianity? These questions are relevant, because several pre-Christian cultic words entered into the personal nomenclature which the Christian mission found in use on its arrival. The fate of the nomenclature in the period does suggest that the change in religion took place reasonably peacefully and gradually. There are, however, certain features about the place-names suggesting that there were local differences in the conduct of the mission.

  14. Listing of awardee names: Active awards

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-01

    This catalog/directory presents DOE`s procurement and assistance data system, arranged according to awardee name, bin, completion date, description of work, division, vendor ID, city, state, congressional district, contract value, obligations to date, P/S.

  15. Geographic Names Information System (GNIS) Antarctica Features

    Data.gov (United States)

    Department of Homeland Security — The Geographic Names Information System (GNIS) is the Federal standard for geographic nomenclature. The U.S. Geological Survey developed the GNIS for the U.S. Board...

  16. About the scientific names of paraphyletic taxa

    OpenAIRE

    TIMM, Tarmo

    2012-01-01

    The 'naturality' of monophyletic taxa in comparison with that of paraphyletic ones is discussed, with examples from Clitellata. Regular scientific names for paraphyletic taxa are inevitable in a workable biological classification.

  17. GNIS: Geographic Names Information Systems - All features

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The Geographic Names Information System (GNIS) actively seeks data from and partnerships with Government agencies at all levels and other interested organizations....

  18. Analisi Pengaruh Store Name, Brand Name, Dan Price Discounts Terhadap Purchase Intentions Konsumen Infinite Tunjungan Plaza

    OpenAIRE

    Gunawan, Andy

    2013-01-01

    Andy Gunawan:SkripsiAnalisis pengaruh store name, brand name dan price discounts terhadap purchase intention konsumen infnite tunjungan plaza Di era globalisasi ini, persaingan dagang antara Perusahaan – Perusahaan baik lokal maupun global menjadi semakin ketat, oleh karena itu Perusahaan selalu berusaha untuk meningkatkan ketertarikan minat beli konsumen. Beberapa variabel yang menjadi fokus Perusahaan adalah store name, brand name, dan price discount. Tujuan penelitian ini adalah untuk meng...

  19. The Translation of Chinese Dish Names

    Institute of Scientific and Technical Information of China (English)

    龚佳文

    2015-01-01

    The traditional food of a nation reflects its historical and cultural characteristics This thesis begins with an introduction to the translation situation of Chinese dish names and its existing problem nowadays, and proceeds to the translation principles and tactics for English translation of the names of Chinese dishes, based on Eugene A. Nida’ s Functional Equivalence, with an aim to improve translation efficiency and promote cross-cultural communication, and promoting Chinese food culture throughout the globe.

  20. Passive Detection of Misbehaving Name Servers

    Science.gov (United States)

    2013-10-01

    name servers that changed IP address five or more times in a month. Solid red line indicates those servers possibly linked to pharmaceutical scams . 12...malicious and stated that fast-flux hosting “is considered one of the most serious threats to online activities today” [ICANN 2008, p. 2]. The...that time, apparently independent of filters on name-server flux, a large number of pharmaceutical scams1 were taken down. These scams apparently

  1. The Private Legal Governance of Domain Names

    DEFF Research Database (Denmark)

    Schovsbo, Jens Hemmingsen

    2016-01-01

    This chapter evaluates the performance of the special private tribunals or panels such as the UDRP which have been developed within complicated systems of self- and co-regulation such as ICANN to decide disputes over domain names. It uses two different dispute resolution models viz. the UDRP (WIP...... trademarks are used as (parts of) domain names to express criticism of the trademark holder or the trademark itself (e.g. “TMsucks.com” / “lorteTM.dk”)....

  2. Sustained Attention Ability Affects Simple Picture Naming

    Directory of Open Access Journals (Sweden)

    Suzanne R. Jongman

    2017-07-01

    Full Text Available Sustained attention has previously been shown as a requirement for language production. However, this is mostly evident for difficult conditions, such as a dual-task situation. The current study provides corroborating evidence that this relationship holds even for simple picture naming. Sustained attention ability, indexed both by participants’ reaction times and individuals’ hit rate (the proportion of correctly detected targets on a digit discrimination task, correlated with picture naming latencies. Individuals with poor sustained attention were consistently slower and their RT distributions were more positively skewed when naming pictures compared to individuals with better sustained attention. Additionally, the need to sustain attention was manipulated by changing the speed of stimulus presentation. Research has suggested that fast event rates tax sustained attention resources to a larger degree than slow event rates. However, in this study the fast event rate did not result in increased difficulty, neither for the picture naming task nor for the sustained attention task. Instead, the results point to a speed-accuracy trade-off in the sustained attention task (lower accuracy but faster responses in the fast than in the slow event rate, and to a benefit for faster rates in the picture naming task (shorter naming latencies with no difference in accuracy. Performance on both tasks was largely comparable, supporting previous findings that sustained attention is called upon during language production.

  3. The history of Latin teeth names.

    Science.gov (United States)

    Šimon, František

    2015-01-01

    This paper aims to give an account of the Latin naming of the different types of teeth by reviewing relevant historical and contemporary literature. The paper presents etymologies of Latin or Greek teeth names, their development, variants and synonyms, and sometimes the names of their authors. The Greek names did not have the status of official terms, but the Latin terms for particular types of teeth gradually established themselves. Names for the incisors, canines and molars are Latin calques for the Greek ones (tomeis, kynodontes, mylai), dens serotinus is an indirect calque of the Greek name (odús) opsigonos, and the term pre-molar is created in the way which is now common in modern anatomical terminology, using the prefix prae- = pre and the adjective molaris. The Latin terms dentes canini and dentes molares occur in the Classical Latin literature, the term (dentes) incisivi is found first time in medieval literature, and the terms dentes premolares and dens serotinus are modern-age ones.

  4. Plants and geographical names in Croatia.

    Science.gov (United States)

    Cargonja, Hrvoje; Daković, Branko; Alegro, Antun

    2008-09-01

    The main purpose of this paper is to present some general observations, regularities and insights into a complex relationship between plants and people through symbolic systems like geographical names on the territory of Croatia. The basic sources of data for this research were maps from atlas of Croatia of the scale 1:100000. Five groups of maps or areas were selected in order to represent main Croatian phytogeographic regions. A selection of toponyms from each of the map was made in which the name for a plant in Croatian language was recognized (phytotoponyms). Results showed that of all plant names recognized in geographical names the most represented are trees, and among them birch and oak the most. Furthermore, an attempt was made to explain the presence of the most represented plant species in the phytotoponyms in the light of general phytogeographical and sociocultural differences and similarities of comparing areas. The findings confirm an expectation that the genera of climazonal vegetation of particular area are the most represented among the phytotoponyms. Nevertheless, there are ample examples where representation of a plant name in the names of human environment can only be ascribed to ethno-linguistic and socio-cultural motives. Despite the reductionist character of applied methodology, this research also points out some advantages of this approach for ethnobotanic and ethnolinguistic studies of greater areas of human environment.

  5. Cleaner shipping. Trade off between air pollution, costs and refinery CO2 emissions

    International Nuclear Information System (INIS)

    De Wilde, H.P.J.; Kroon, P.

    2008-05-01

    Still subject to final approval in October 2008, the International Maritime Organisation (IMO) agreed on a maximum sulphur content of 0.5% for shipping fuels in 2020. This target will induce major changes in the global refinery industry. We have estimated the impact on the Dutch refinery industry, which annually produces about 8 million tons of heavy fuel oil for sea shipping, with refinery residues as main component. It is technically possible to convert all residues, although this process will cause an additional energy use of about one million tons of crude oil and a related CO2 emission of about 4 million tons. The investment costs for these major changes in the Dutch refinery industry are estimated at about 1.5 tot 2 billion euros. The recent IMO agreement enables a gradual introduction of cleaner shipping fuels, which will reduce market disruptions and peak prices. Nevertheless, Rotterdam may not necessarily be able to develop a similar position in import, export and bunkering of future low sulphur fuels, compared to its present strong position in the market of heavy marine bunkers. Extrapolation of our national study to the global scale suggests that the deep conversion of 350 million tons of heavy fuel oil for shipping would require refinery investments in the order of 70-100 billion euros. The associated CO2 emissions would amount up to 175 Mton. The net additional CO2 emission, however, would be smaller since lighter shipping fuels result in less CO2 emissions at sea. On balance, we expect that the improvements in fuel economy, driven by the expensive low-carbon shipping fuels, will decrease CO2 emissions more than the increase in CO2 emissions from additional desulphurization in the refineries. Nevertheless CO2 emissions from sea shipping will continue to increase since marine transport is rapidly growing

  6. The Names of God in Jewish Mysticism

    Directory of Open Access Journals (Sweden)

    Konstantin Burmistrov

    2014-12-01

    Full Text Available The concept of the names of God and their role in the creation and existence of the world, as well as the practice of their veneration constitute an essential part of Judaism in general, and are elaborated in detail in Jewish mysticism. In Kabbalah, an idea of the creative power of the Tetragrammaton (the ineff able four-letter Name and other names occupies an especially prominent place. It is based on the idea of linguistic mysticism conveyed in the Jewish mystical treatise Sefer Yetzirah (“Book of Creation”, 3–6 centuries AD.. According to this ancient text, the creation of the world is seen as a linguistic process in which the Hebrew letters are thought of as both the creative forces and the material of which the world is created. The article analyses the main features of the symbolism of the divine names in medieval Kabbalah. We have identifi ed two main areas in the understanding of the divine names, peculiar to the two main schools of classical medieval Kabbalah — theosophical (theurgic and ecstatic (prophetic. The ideas of these schools are considered according to the works of two prominent kabbalists of the 13th c. — Joseph Gikatilla and Abraham Abulafi a. In the fi rst of these schools, knowing the names of God leads to the actualization of the latent mystical forces and results in a transformation and reintegration of our world and the world of the divine. This process, in turn, is understood as having an eschatological and messianic signifi cance. Abraham Abulafi a elaborated sophisticated practices of combining the divine names aimed at transforming the adept’s consciousness, its purifi cation and development of special mental abilities. At the end of the mystical path the practitioner achieves the state of prophecy and eventually merges with the Divine.

  7. Standardizing Naming Conventions in Radiation Oncology

    Energy Technology Data Exchange (ETDEWEB)

    Santanam, Lakshmi [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Hurkmans, Coen [Department of Radiation Oncology, Catharina Hospital, Eindhoven (Netherlands); Mutic, Sasa [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Vliet-Vroegindeweij, Corine van [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Brame, Scott; Straube, William [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Galvin, James [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Tripuraneni, Prabhakar [Department of Radiation Oncology, Scripps Clinic, LaJolla, CA (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Bosch, Walter, E-mail: wbosch@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Advanced Technology Consortium, Image-guided Therapy QA Center, St. Louis, MO (United States)

    2012-07-15

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were

  8. Standardizing Naming Conventions in Radiation Oncology

    International Nuclear Information System (INIS)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; Vliet-Vroegindeweij, Corine van; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-01-01

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were

  9. Standardizing naming conventions in radiation oncology.

    Science.gov (United States)

    Santanam, Lakshmi; Hurkmans, Coen; Mutic, Sasa; van Vliet-Vroegindeweij, Corine; Brame, Scott; Straube, William; Galvin, James; Tripuraneni, Prabhakar; Michalski, Jeff; Bosch, Walter

    2012-07-15

    The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were satisfactorily identified using this

  10. SNAD: sequence name annotation-based designer

    Directory of Open Access Journals (Sweden)

    Gorbalenya Alexander E

    2009-08-01

    Full Text Available Abstract Background A growing diversity of biological data is tagged with unique identifiers (UIDs associated with polynucleotides and proteins to ensure efficient computer-mediated data storage, maintenance, and processing. These identifiers, which are not informative for most people, are often substituted by biologically meaningful names in various presentations to facilitate utilization and dissemination of sequence-based knowledge. This substitution is commonly done manually that may be a tedious exercise prone to mistakes and omissions. Results Here we introduce SNAD (Sequence Name Annotation-based Designer that mediates automatic conversion of sequence UIDs (associated with multiple alignment or phylogenetic tree, or supplied as plain text list into biologically meaningful names and acronyms. This conversion is directed by precompiled or user-defined templates that exploit wealth of annotation available in cognate entries of external databases. Using examples, we demonstrate how this tool can be used to generate names for practical purposes, particularly in virology. Conclusion A tool for controllable annotation-based conversion of sequence UIDs into biologically meaningful names and acronyms has been developed and placed into service, fostering links between quality of sequence annotation, and efficiency of communication and knowledge dissemination among researchers.

  11. Tagging Named Entities in Croatian Tweets

    Directory of Open Access Journals (Sweden)

    Krešimir Baksa

    2017-01-01

    Full Text Available Named entity extraction tools designed for recognizing named entities in texts written in standard language (e.g., news stories or legal texts have been shown to be inadequate for user-generated textual content (e.g., tweets, forum posts. In this work, we propose a supervised approach to named entity recognition and classification for Croatian tweets. We compare two sequence labelling models: a hidden Markov model (HMM and conditional random fields (CRF. Our experiments reveal that CRF is the best model for the task, achieving a very good performance of over 87% micro-averaged F1 score. We analyse the contributions of different feature groups and influence of the training set size on the performance of the CRF model.

  12. English Shop Signs and Brand Names

    Directory of Open Access Journals (Sweden)

    Parvaneh Khosravizadeh

    2016-07-01

    Full Text Available The present study tries to investigate the people’s attitude to the use of English words in TV commercials, brand-naming and shop signs in Iran and specifically in Tehran where due to the fact that it is the capital, more English might be used for the sake of foreigners. The widespread use of English shop signs and English brand names for recently produced goodsdrove the researchers to investigate peoples’ attitude as consumers from two aspects of age and education. To reach the research goal, a questionnaire was devised and distributed to 100 people at random selection probing their attitudes while considering two factors of age and education. The result of the research will mostly benefit sociolinguists and business marketers.Keywords: age, education, advertising, brand-naming, shop signs, globalization

  13. Precedent Proper Names in Informal Oikonymy

    Directory of Open Access Journals (Sweden)

    Maria V. Akhmetova

    2013-06-01

    Full Text Available The paper deals with the Russian language informal city names (oikonyms motivated by other toponyms (with reference to Russia and the CIS. The author shows that the motivating proper name can replace the city name (e. g. Глазго < Glasgow ‘Glazov’ or contaminate with it (e. g. Экибостон < Ekibastuz + Boston, the “alien” onym being attracted to construct an informal oikonym due to its phonetic similarity or, on occasion, due to an affinity, either real or imaginary, between the two settlements. The author argues that the phonetic motivation is more characteristic for the modern urban tradition, than for popular dialects.

  14. Learning the Students' Names: Does it Matter?

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2014-01-01

    on the effect of learning the students' names are sparse. Against this background, this paper reports on a method for learning all the students' names and two studies of the effect, based on my use of the method in my teaching. The two survey studies were carried in 2011 and in 2014. A survey was in the first...... sent to 50 students and I received 18 answers (38%). The second survey was sent to 86 students and I received 48 answers (56%). These figures provides a good indication.The answers showed a marked positive effect: the students felt welcome, accepted and respected; the learning environment was more......A key factor in successful teaching and learning is the relationship between the students and the teacher. A simple approach nurturing this relationship is learning the students' names. This is often suggested in the literature, but seems rarely practised. Substantial reports in the literature...

  15. North-American norms for name disagreement: pictorial stimuli naming discrepancies.

    Directory of Open Access Journals (Sweden)

    Mary O'Sullivan

    Full Text Available Pictorial stimuli are commonly used by scientists to explore central processes; including memory, attention, and language. Pictures that have been collected and put into sets for these purposes often contain visual ambiguities that lead to name disagreement amongst subjects. In the present work, we propose new norms which reflect these sources of name disagreement, and we apply this method to two sets of pictures: the Snodgrass and Vanderwart (S&V set and the Bank of Standardized Stimuli (BOSS. Naming responses of the presented pictures were classified within response categories based on whether they were correct, incorrect, or equivocal. To characterize the naming strategy where an alternative name was being used, responses were further divided into different sub-categories that reflected various sources of name disagreement. Naming strategies were also compared across the two sets of stimuli. Results showed that the pictures of the S&V set and the BOSS were more likely to elicit alternative specific and equivocal names, respectively. It was also found that the use of incorrect names was not significantly different across stimulus sets but that errors were more likely caused by visual ambiguity in the S&V set and by a misuse of names in the BOSS. Norms for name disagreement presented in this paper are useful for subsequent research for their categorization and elucidation of name disagreement that occurs when choosing visual stimuli from one or both stimulus sets. The sources of disagreement should be examined carefully as they help to provide an explanation of errors and inconsistencies of many concepts during picture naming tasks.

  16. Automatic Recognition of Object Names in Literature

    Science.gov (United States)

    Bonnin, C.; Lesteven, S.; Derriere, S.; Oberto, A.

    2008-08-01

    SIMBAD is a database of astronomical objects that provides (among other things) their bibliographic references in a large number of journals. Currently, these references have to be entered manually by librarians who read each paper. To cope with the increasing number of papers, CDS develops a tool to assist the librarians in their work, taking advantage of the Dictionary of Nomenclature of Celestial Objects, which keeps track of object acronyms and of their origin. The program searches for object names directly in PDF documents by comparing the words with all the formats stored in the Dictionary of Nomenclature. It also searches for variable star names based on constellation names and for a large list of usual names such as Aldebaran or the Crab. Object names found in the documents often correspond to several astronomical objects. The system retrieves all possible matches, displays them with their object type given by SIMBAD, and lets the librarian make the final choice. The bibliographic reference can then be automatically added to the object identifiers in the database. Besides, the systematic usage of the Dictionary of Nomenclature, which is updated manually, permitted to automatically check it and to detect errors and inconsistencies. Last but not least, the program collects some additional information such as the position of the object names in the document (in the title, subtitle, abstract, table, figure caption...) and their number of occurrences. In the future, this will permit to calculate the 'weight' of an object in a reference and to provide SIMBAD users with an important new information, which will help them to find the most relevant papers in the object reference list.

  17. Mitigation of the effective dose of radon decay products through the use of an air cleaner in a dwelling in Okinawa, Japan

    International Nuclear Information System (INIS)

    Kranrod, Chutima; Tokonami, Shinji; Ishikawa, Tetsuo; Sorimachi, Atsuyuki; Janik, Miroslaw; Shingaki, Reina; Furukawa, Masahide; Chanyotha, Supitcha; Chankow, Nares

    2009-01-01

    Field measurements were conducted to assess the effects of an air cleaner on radon mitigation in a dwelling with a high radon concentration in Okinawa, Japan. The measurements included indoor radon concentration, individual radon progeny concentration, equilibrium equivalent concentration of radon (EECRn), unattached fraction, and size distribution of aerosol-attached radon progeny. These measurements were conducted in a 74 m 3 room with/without the use of an air cleaner. The results showed that the mean radon concentration during the measurement was quite high (301 Bq m -3 ). The operation of air cleaner decreased the radon progeny activity concentration, EECRn and equilibrium factor by 33%, 57% and 71%, respectively, whereas the unattached fraction increased by 174%. In addition, the activity concentration of attached radon progeny in the accumulation mode (50-2000 nm) was obviously deceased by 42%, when the air cleaner was operated. According to dosimetric calculations, the operation of air cleaner reduced the effective dose due to radon progeny by about 50%.

  18. Gene name ambiguity of eukaryotic nomenclatures.

    Science.gov (United States)

    Chen, Lifeng; Liu, Hongfang; Friedman, Carol

    2005-01-15

    With more and more scientific literature published online, the effective management and reuse of this knowledge has become problematic. Natural language processing (NLP) may be a potential solution by extracting, structuring and organizing biomedical information in online literature in a timely manner. One essential task is to recognize and identify genomic entities in text. 'Recognition' can be accomplished using pattern matching and machine learning. But for 'identification' these techniques are not adequate. In order to identify genomic entities, NLP needs a comprehensive resource that specifies and classifies genomic entities as they occur in text and that associates them with normalized terms and also unique identifiers so that the extracted entities are well defined. Online organism databases are an excellent resource to create such a lexical resource. However, gene name ambiguity is a serious problem because it affects the appropriate identification of gene entities. In this paper, we explore the extent of the problem and suggest ways to address it. We obtained gene information from 21 organisms and quantified naming ambiguities within species, across species, with English words and with medical terms. When the case (of letters) was retained, official symbols displayed negligible intra-species ambiguity (0.02%) and modest ambiguities with general English words (0.57%) and medical terms (1.01%). In contrast, the across-species ambiguity was high (14.20%). The inclusion of gene synonyms increased intra-species ambiguity substantially and full names contributed greatly to gene-medical-term ambiguity. A comprehensive lexical resource that covers gene information for the 21 organisms was then created and used to identify gene names by using a straightforward string matching program to process 45,000 abstracts associated with the mouse model organism while ignoring case and gene names that were also English words. We found that 85.1% of correctly retrieved mouse

  19. Cross domains Arabic named entity recognition system

    Science.gov (United States)

    Al-Ahmari, S. Saad; Abdullatif Al-Johar, B.

    2016-07-01

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora.

  20. Love me, love me not: changed names

    OpenAIRE

    2010-01-01

    Tiré du site Internet de Onestar Press: " A selection of 150 cities within Slavs and Tatars’ Eurasian remit, Love Me, Love Me Not : Changed Names plucks the petals off the past to reveal an impossibly thorny stem : a lineage of names changed by the course of the region’s grueling history. Some cities divulge a resolutely Asian heritage, so often forgotten in today’s quest, at all costs, for European integration. Some vacillate almost painfully, and others with numbing repetition, entire metro...

  1. Centrally managed name resolution schemes for EPICS

    International Nuclear Information System (INIS)

    Jun, D.

    1997-01-01

    The Experimental Physics and Industrial Control System (EPICS) uses a broadcast method to locate resources and controls distributed across control servers. There are many advantages offered by using a centrally managed name resolution method, in which resources are located using a repository. The suitability of DCE Directory Service as a name resolution method is explored, and results from a study involving DCE are discussed. An alternative nameserver method developed and in use at the Thomas Jefferson national Accelerator Facility (Jefferson Lab) is described and results of integrating this new method with existing EPICS utilities presented. The various methods discussed in the paper are compared

  2. [Why the name "Erasmus" for an hospital ?

    Science.gov (United States)

    Noterman, J

    2017-01-01

    Why the name "Erasmus" for an hospital ? Apart for local circumstances, there are far more obvious reasons for this choice. Erasmus was in close contact with the medical world. Indeed, he suffered all his life from more or less severe diseases and had therefore frequent contacts with doctors. Also, the ideas he was defending stood for the principle of free inquiry before its time. For these various reasons giving the name « Erasmus » to the university clinics of the Free University of Brussels (ULB) was a judicious choise.

  3. Groundwater contamination by chlorinated hydrocarbons in the soil vapour phase - risk assessment at a former dry cleaner site

    Energy Technology Data Exchange (ETDEWEB)

    Danzer, J. [Boden-und-Grundwasser GbR, Sonthofen (Germany)

    2002-07-01

    Chlorinated hydrocarbons, e.g. Perchloroethene (PCE) were commonly used for dry cleaning purposes among other ones. Since they have a significant toxic potential they impose a serious risk to groundwater quality. Due to their physico-chemical properties - particularly high volatility and medium to high water solubility - and their low biodegradation potential they are highly mobile within the unsaturated soil (vapour phase) as well as within the groundwater. This poster (paper) presents data and calculations of a consultant's ''virtual every day'' work in order to assess the risk of groundwater contamination at a former dry cleaner site. (orig.)

  4. The ecological significance of juvenile Diplodus sargus as ectoparasite fish cleaners in the north-eastern Atlantic

    Directory of Open Access Journals (Sweden)

    José Neto

    2015-11-01

    Full Text Available Cleaning behaviour was recently described for the omnivorous species Diplodus sargus. Although previous studies have reported the existence of ectoparasites in the stomach contents of some individuals this commercially important fish was never considered a cleaner species. Here we make the first characterization of this behaviour based on field observations. This behaviour was exclusively performed by juvenile D. sargus and, until now, was only observed in confined or semi-confined areas such as coastal lagoons or harbours. Unexpectedly, cleaning rates and the number of individuals performing this behaviour largely exceeds the ones described for a sympatric cleaner fish (13.98 cleaning events/individual/hour compared to 5.08 in Centrolabrus exoletus. Clients belong to several fish families (e.g. Mugilidae, Sparidae and Labridae that include some of the most common species in coastal habitats. Frequently, clients request cleaning by tilting their body or remaining motionless near the surface while being cleaned (40% however, in most cases, the interaction ends because clients flee (46%. This could mean that D. sargus is also feeding on mucus and/or living tissue. These shifts between exploitation and cooperation have been frequently described for tropical reef species. Our results support cooperative behaviour, with a clear correlation between the number of nips per cleaning event or the number of nips to which the client reacted positively and cleaning event duration (n=552; Spearman correlation r=0.79, p<0.001; r=0.76, p<0.001, respectively. Furthermore, no correlation was detected between the number of jolts by the client fish and the cleaning event duration (n=552; Spearman correlation r=0.07, p=0.105 meaning that jolting does not increase with increased interaction time. In the future, the evaluation of the ecological importance of D. sargus as a cleaner species in the North-Eastern Atlantic, should proceed with field observations in

  5. On identifying name equivalences in digital libraries. Name equivalence, Surname matching, Author identification, Databases

    Directory of Open Access Journals (Sweden)

    Dror G. Feitelson

    2004-01-01

    Full Text Available The services provided by digital libraries can be much improved by correctly identifying variants of the same name. For example, this will allow for better retrieval of all the works by a certain author. We focus on variants caused by abbreviations of first names, and show that significant achievements are possible by simple lexical analysis and comparison of names. This is done in two steps: first a pairwise matching of names is performed, and then these are used to find cliques of equivalent names. However, these steps can each be performed in a variety of ways. We therefore conduct an experimental analysis using two real datasets to find which approaches actually work well in practice. Interestingly, this depends on the size of the repository, as larger repositories may have many more similar names.

  6. Power ultrasound-assisted cleaner leather dyeing technique: influence of process parameters.

    Science.gov (United States)

    Sivakumar, Venkatasubramanian; Rao, Paruchuri Gangadhar

    2004-03-01

    The application of power ultrasound to leather processing has a significant role in the concept of "clean technology" for leather production. The effect of power ultrasound in leather dyeing has been compared with dyeing in the absence of ultrasound and conventional drumming. The power ultrasound source used in these experiments was ultrasonic cleaner (150 W and 33 kHz). The effect of various process parameters such as amount of dye offer, temperature, and type of dye has been experimentally found out. The effect of presonication of dye solution as well as leather has been studied. Experiments at ultrasonic bath temperature were carried out to find out the combined thermal as well as stirring effects of ultrasound. Dyeing in the presence of ultrasound affords about 37.5 (1.8 times) difference as increase in % dye exhaustion or about 50% decrease in the time required for dyeing compared to dyeing in the absence of ultrasound for 4% acid red dye. About 29 (1.55 times) increase in % dye exhaustion or 30% reduction in time required for dyeing was observed using ultrasound at stationary condition compared with conventional dynamic drumming conditions. The effect of ultrasound at constant temperature conditions with a control experiment has also been studied. The dye exhaustion increases as the temperature increases (30-60 degrees C) and better results are observed at higher temperature due to the use of ultrasound. Presonication of dye solution or crust leather prior to the dyeing process has no significant improvement in dye exhaustion, suggesting ultrasound effect is realized when it is applied during the dyeing process. The results indicate that 1697 and 1416 ppm of dye can be reduced in the spent liquor due to the use of ultrasound for acid red (for 100 min) and acid black (for 3 h) dyes, respectively, thereby reducing the pollution load in the effluent stream. The color yield of the leather as inferred from the reflectance measurement indicates that dye offer can

  7. On streamlining the Ukrainian names of plants. Information 7. Spelling the names of plant varieties.

    Directory of Open Access Journals (Sweden)

    В. М. Меженський

    2016-07-01

    Full Text Available Purpose. To analyse the practice of transliteration of the Ukrainian cultivar names and rendering foreign names by means of the Ukrainian language, as well as special aspects of cultivar names spelling in special literature. Results. Cultivar names as a special category require preservation of primary graphics or sound type in the other language. This can be achieved by direct inclusion of the original name to the Ukrainian text or by practical transcribing, but not by transliteration or translation. Otherwise, Ukrainian names should be transliterated for inclusion to the texts in Latin characters. Transcription/transliteration in both directions is performed from the source language, though, as practice shows, in some Ukrainian publications the Russian is wrongly used as an intermediary language. Some national scientific publications ignore the recommendations of the International Code of Nomenclature for Cultivated Plants that is not conducive to the success of scientific communication in the globalized world. Conclusions. The foreign names of plant varieties should be entered into the Ukrainian text keeping the original spelling or by means of practical transcription. The loan of foreign names is performed by transcribing directly from the source language; if the language doesn’t have the Latin alphabet, Latinized name transcription is acceptable. Recommendations of the International Code of Nomenclature for Cultivated Plants that concern graphic highlighting of the cultivar names in the text enclosing them in single quotation marks and writing each word of a cultivar name with a capital letter should necessarily be applied in the foreign-language publications and extended to the Ukrainian special literature, at least, in terms of the use of single quotation marks. Ukrainian names should be transliterated only in accordance with the regulations.

  8. What's in a Name? Interlocutors Dynamically Update Expectations about Shared Names.

    Science.gov (United States)

    Gegg-Harrison, Whitney M; Tanenhaus, Michael K

    2016-01-01

    In order to refer using a name, speakers must believe that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned a subset of names together, speakers are adept at using only the names their partner knows. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers' choice of referring expression? A speaker who is uncertain about a names' common ground (CG) status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker's knowledge. In cases where knowledge of one name is associated with knowledge of other names, this could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using Bayesian approaches to language processing as a guiding framework, we predict that interlocutors can use their partner's choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner's knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner's referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner's use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner's choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

  9. Apparatus Named after Our Academic Ancestors, III

    Science.gov (United States)

    Greenslade, Thomas B., Jr.

    2014-01-01

    My academic ancestors in physics have called on me once more to tell you about the apparatus that they devised, and that many of you have used in your demonstrations and labs. This article is about apparatus named after François Arago, Heinrich Helmholtz, Leon Foucault, and James Watt.

  10. Predictable Locations Aid Early Object Name Learning

    Science.gov (United States)

    Benitez, Viridiana L.; Smith, Linda B.

    2012-01-01

    Expectancy-based localized attention has been shown to promote the formation and retrieval of multisensory memories in adults. Three experiments show that these processes also characterize attention and learning in 16- to 18-month old infants and, moreover, that these processes may play a critical role in supporting early object name learning. The…

  11. Measuring the global domain name system

    NARCIS (Netherlands)

    Casalicchio, E.; Shen, Xuemin; Caselli, M.; Coletta, A.

    2013-01-01

    The Internet is a worldwide distributed critical infrastructure, and it is composed of many vital components. While IP routing is the most important service, today the Domain Name System can be classified as the second most important, and has been defined as a critical infrastructure as well. DNS

  12. Implementing XML Schema Naming and Design Rules

    Energy Technology Data Exchange (ETDEWEB)

    Lubell, Joshua [National Institute of Standards and Technology (NIST); Kulvatunyou, Boonserm [ORNL; Morris, Katherine [National Institute of Standards and Technology (NIST); Harvey, Betty [Electronic Commerce Connection, Inc.

    2006-08-01

    We are building a methodology and tool kit for encoding XML schema Naming and Design Rules (NDRs) in a computer-interpretable fashion, enabling automated rule enforcement and improving schema quality. Through our experience implementing rules from various NDR specifications, we discuss some issues and offer practical guidance to organizations grappling with NDR development.

  13. Griffon – what's in a name?

    African Journals Online (AJOL)

    Campbell Murn

    genus name of Gyps for Gyps vulgaris [= G.fulvus], which he ... Appendix to this note my translation of Perrault's article; curiously he ... My translation of Mr. Perrault's article. ANATOMICAL DESCRIPTION OF. TWO GRIFONS. The description that previous. Authors made of the Grifon does not fit any known animal: besides the.

  14. Named entity normalization in user generated content

    NARCIS (Netherlands)

    Jijkoun, V.; Khalid, M.A.; Marx, M.; de Rijke, M.

    2008-01-01

    Named entity recognition is important for semantically oriented retrieval tasks, such as question answering, entity retrieval, biomedical retrieval, trend detection, and event and entity tracking. In many of these tasks it is important to be able to accurately normalize the recognized entities,

  15. Cognitive Predictors of Rapid Picture Naming

    Science.gov (United States)

    Decker, Scott L.; Roberts, Alycia M.; Englund, Julia A.

    2013-01-01

    Deficits in rapid automatized naming (RAN) have been found to be a sensitive cognitive marker for children with dyslexia. However, there is a lack of consensus regarding the construct validity and theoretical neuro-cognitive processes involved in RAN. Additionally, most studies investigating RAN include a narrow range of cognitive measures. The…

  16. Registering Names and Addresses for Information Technology.

    Science.gov (United States)

    Knapp, Arthur A.

    The identification of administrative authorities and the development of associated procedures for registering and accessing names and addresses of communications data systems are considered in this paper. It is noted that, for data communications systems using standards based on the Open Systems Interconnection (OSI) Reference Model specified by…

  17. Spatial Planning: What's in a Name?

    NARCIS (Netherlands)

    Faludi, A.K.F.

    2003-01-01

    Spatial Planning: What's in a Name? Andreas Faludi, University of Nijmegen Spatial planning is Euro-English and means different things to different people. In the UK it now carries the connotation of 'Modernising Planning', taking it beyond land-use management. In the EU context ,too, regulatory and

  18. Naming Speed in Dyslexia and Dyscalculia

    Science.gov (United States)

    Willburger, Edith; Fussenegger, Barbara; Moll, Kristina; Wood, Guilherme; Landerl, Karin

    2008-01-01

    In four carefully selected samples of 8- to 10-year old children with dyslexia (but age adequate arithmetic skills), dyscalculia (but age adequate reading skills), dyslexia/dyscalculia and controls a domain-general deficit in rapid automatized naming (RAN) was found for both dyslexia groups. Dyscalculic children exhibited a domain-specific deficit…

  19. Biggert named chairman of energy subcommittee

    CERN Multimedia

    2003-01-01

    U.S. Representative Judy Biggert has been named Chairman of the Energy Subcommittee of the House Science Committee, a key panel with jurisdiction over the federal government's civilian energy and science research activities, including the work done at Argonne and Fermilab (1 page).

  20. PS, SL and LHC Auditoria change names

    CERN Multimedia

    2003-01-01

    Following the replacement of the PS, SL and LHC Divisions by the AB and AT Divisions, the Auditoria are also changing their names. PS Auditorium is renamed AB Meyrin SL Auditorium is renamed AB Prévessin LHC Auditorium is renamed AT

  1. What’s In Your Name? Associated Meanings of the Common Filipino Names Among Young Filipinos

    Directory of Open Access Journals (Sweden)

    Shaira G. Castillo

    2016-11-01

    Full Text Available Name is important in knowing someone’s identity. By a person’s name someone can know his or her character. It is also possible that they bear a particular name because of their background and other factors that can lead to something important. This study aimed to find out the associative meanings of the most common Filipino male and female names among the Polytechnic University of the Philippines-Sta. Mesa students. Different factors such as character traits, physical appearance, and skills/talents were considered in determining meanings of the names. The study used quantitative and qualitative research approach, specifically the descriptive method, to analyze the gathered data. A selfadministered survey was distributed to 400 randomly selected respondents. General findings revealed that the respondents associated the most common Filipino male names in the same way regarding character traits and skills/talents. However, they have different associations to the male names in terms of physical appearance. On the other hand, the respondents associated the most common Filipino female names into similar character traits and physical appearance but associated them with different skills/talents. Results also revealed that the most common factors that influence the respondents’ associated meanings were relationships, experiences, popularity, and perception. The results imply that while young Filipinos associate similar character traits, physical appearances and skills to common Filipino names, they have different reasons in giving meanings to them.

  2. 27 CFR 41.251 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... corporate name. When there is a change in the corporate name of an importer of processed tobacco, the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 41.251... name. (a) Change in individual name. When there is a change in the name of an individual operating...

  3. Cognitive abilities and creating metaphorical names

    Directory of Open Access Journals (Sweden)

    Avanesyan, Marina O.

    2016-06-01

    Full Text Available The cognitive processing of metaphor creation has been insufficiently investigated. Creating metaphors requires the ability to work in a fantastic, impossible context, using symbolic and associative means to express oneís thoughts. It has been shown recently that intelligence plays an important role in the creation of metaphors, but it is not the main factor in determining their success. The present research explores the roles of conceptual abilities, categorical abilities, and flexibility (as the factor creativity in metaphor creation. Participants (n = 38 young adults were asked to come up with names for three photos, without any special instruction to create metaphors. To classify conceptual abilities we used ìConceptual Synthesisî (M. A. Kholodnaya, 2012; to measure categorical ability we used the subtest ìSimilaritiesî (D. Wechsler, 1955; to identify the role of creativity in the metaphor process we used the test of ìUnusual Usesî (J. P. Guilford, 1960. The creation of complex metaphorical names was associated with a tendency to create highly organized mental structures and to retain them within the general semantic context (r = 0.344, p < 0.05. The tendency to create single-level situational connections was associated with a tendency to give specific names to photos (r = 0.475, p < 0.01. Photographic images proved out to be fruitful stimuli to investigate the processing of visual information. We developed a preliminary classification of names: 1 concrete; 2 situational; 3 abstract; 4 metaphorical (M1 and M2. We identified two types of metaphorical names — perceptual and complex metaphors — that relate to conceptual abilities in different ways. It is inaccurate to speak about a general concept of ìmetaphorical abilitiesî; we should differentiate the psychological mechanisms that lie at their base.

  4. The List of Available Names (LAN): A new generation for stable taxonomic names in zoology?

    Science.gov (United States)

    Alonso-Zarazaga, Miguel A; Fautin, Daphne Gail; Michel, Ellinor

    2016-01-01

    The List of Available Names in Zoology (LAN) is an inventory of names with specific scope in time and content, presented and approved in parts, and constituted as a cumulative index of names available for use in zoological nomenclature. It was defined in Article 79 in the fourth edition of the International Code of Zoological Nomenclature. The LAN is likely to gain importance with the development of the online Official Registry for Zoological Nomenclature (ZooBank) as it is potentially a source of many nomenclaturally certified names. Article 79 describes the deliberative process for adding large numbers of names to the LAN simultaneously, detailing steps and chronology for submission of a candidate Part to the LAN and consideration of a candidate Part by the public and Commission, but it is largely mute about the contents of a candidate Part. It does make clear that a name within the scope of a Part but not on the LAN has no nomenclatural standing, even if it had previously been considered available, thereby preventing long-forgotten names from displacing accepted ones and the accumulation of nomina dubia. Thus, for taxa on the LAN, nomenclatural archaeology - the resurrecting of old unused names to replace by priority names in current usage - will not be worthwhile. Beyond that, it has been unclear if Article 79 is intended to document every available name known within the scope of the Part, or if its intention is to pare the inventory of available names within the scope of the Part. Consideration by the Commission and two committees to deal with the LAN have defined steps to implement Article 79 with the latter intent. Procedures for consideration of a candidate Part are defined in a manual, published as an appendix in this volume.

  5. What's in a Name? Interlocutors dynamically update expectations about shared names

    Directory of Open Access Journals (Sweden)

    Whitney Marie Gegg-Harrison

    2016-02-01

    Full Text Available In order to refer using a name, speakers must know that their addressee knows about the link between the name and the intended referent. In cases where speakers and addressees learned names together, speakers are adept at using names only when their addressee knows them. But speakers do not always share such learning experience with their conversational partners. In these situations, what information guides speakers’ choice of referring expression? A speaker who is uncertain about a names’ common ground (CG status often uses a name and description together. This N+D form allows speakers to demonstrate knowledge of a name, and could provide, even in the absence of miscommunication, useful evidence to the addressee regarding the speaker’s knowledge. In cases where knowledge of one name is associated with knowledge of other names, could provide indirect evidence regarding knowledge of other names that could support generalizations used to update beliefs about CG. Using data explanation approaches to language processing as a guiding framework, we predict that interlocutors can use their partner’s choice of referring expression, in particular their use of an N+D form, to generate more accurate beliefs regarding their partner’s knowledge of other names. In Experiment 1, we find that domain experts are able to use their partner’s referring expression choices to generate more accurate estimates of CG. In Experiment 2, we find that interlocutors are able to infer from a partner’s use of an N+D form which other names that partner is likely to know or not know. Our results suggest that interlocutors can use the information conveyed in their partner’s choice of referring expression to make generalizations that contribute to more accurate beliefs about what is shared with their partner, and further, that models of CG for reference need to account not just for the status of referents, but the status of means of referring to those referents.

  6. Cleaner production options for reducing industrial waste: the case of batik industry in Malang, East Java-Indonesia

    Science.gov (United States)

    Sirait, M.

    2018-01-01

    The aim of this research is to conduct cleaner production options for improving the environmental performance during the production of batik industry, the case of UKM batik, Malang, East Java. Batik industry is one of small and medium textile industry which has contribution to economic growth in Malang. However, during production the batik, it generates wastewater that has potential to decrease the environmental performance. Wastewater from Celaket batik industry has BOD, COD, TSS, and pH level is far larger than the threshold of water quality standard as a result of use chemical substance during the dyes processing. In order to prevent generating wastewater, this study utilized cleaner production options, such as substitution of input material.Substitution of input material for dyes process was implemented by replacement chemical dyes (e.g.indigosol, nafthol, rapid) with natural dyes (e.g. Indigofero Tintoria). Modifying of technology/equipment was conducted by developing wastewater treatment equipment to reduce waste of batik production. The implementation of this strategy was carried out by changing input material from chemical dyes with natural dyes. The CP uptake could reduce significantly the environmental impact in term of reduction of COD, BOD, and TSS.

  7. Dichlorvos (DDVP residue removal from tomato by washing with tap and ozone water, a commercial detergent solution and ultrasonic cleaner

    Directory of Open Access Journals (Sweden)

    Ali HESHMATI

    Full Text Available Abstract Dichlorvos (DDVP is one of the most consumption chlorinated organophosphate insecticide used on tomato. The knowledge about the influence of postharvest household processes on the levels of DDVP residues in vegetables is required to estimate dietary exposure. In this study, the removal of sprayed dichlorvos (DDVP on tomato by washing with tap, ozonated water (in dosages of 2, 4 and 6 mg ozone/L, a commercial detergent solution (in concentration of 1, 2 and 3% and ultrasonic cleaner (with power of 100, 200 and 300 W was investigated. DDVP residue was determined by gas chromatography with electron capture detector. Washing processes led to the significant reduction of DDVP. The gradual increase in the percentage of the removal was observed due to increment of washing time, ozone dosage, and concentration of detergent solution as well as ultrasonic power. The maximum removal percentage of DDVP after 15 min of washing with tap and ozonated water, a detergent solution and ultrasonic cleaner was 30.7, 91.9, 70.7, and 88.9%, respectively. In general, results indicated washing with tap, ozonated water, a detergent solution and ultrasonic cleaning are effective methods for removal of DDVP from tomato and reduction of its dietary exposure without influence on product quality.

  8. Associations between psychological demands, decision latitude, and job strain with smoking in female hotel room cleaners in Las Vegas.

    Science.gov (United States)

    Rugulies, Reiner; Scherzer, Teresa; Krause, Niklas

    2008-01-01

    Little is known of the impact of the work environment on smoking among women holding low-paid jobs in the service sector. To study the associations between the components of the demand-control model with smoking in hotel room cleaners. We conducted a survey on work and health among 776 female hotel room cleaners in Las Vegas. Associations between psychosocial work characteristics and smoking were analyzed with multivariate regression analyses. Psychosocial work characteristics were associated with smoking after adjustment for covariates. Effect estimates were substantially reduced by additional adjustment for ethnicity, but remained significant for high psychological demands and smoking prevalence (OR = 1.97, p = 0.02), high job strain and smoking prevalence (OR = 1.87, p = 0.04), and high job strain and smoking intensity (coefficient = 3.52, p = 0.03). When analyses were restricted to Hispanic workers and further adjusted for place of birth, low decision latitude (coefficient = 3.94, p = 0.04) and high job strain (coefficient = 4.57, p = 003) were associated with smoking intensity but not with smoking status. Workplace smoking cessation programs may benefit from a primary prevention component reducing job strain among service workers. More research is needed on perceived and objective differences in psychosocial work characteristics across ethnic, immigrant, and other social groups within the same occupation.

  9. Effort-reward imbalance at work and self-rated health of Las Vegas hotel room cleaners.

    Science.gov (United States)

    Krause, Niklas; Rugulies, Reiner; Maslach, Christina

    2010-04-01

    This study investigates the relationship between effort-reward-imbalance (ERI) at work and self-rated health (SF-36) among 941 Las Vegas hotel room cleaners (99% female, 84% immigrant). Logistic regression models adjust for age, health behaviors, physical workload and other potential confounders. 50% reported ERI and 60% poor or fair general health. Significant associations were found between ERI and all SF-36 health measures. Workers in the upper quartile of the efforts/rewards ratio were 2-5 times more likely to experience poor or fair general health, low physical function, high levels of pain, fatigue, and role limitations due to physical and mental health problems. The cross-sectional design limits causal interpretation of these associations. However, the development of interventions to reduce ERI and to improve general health among room cleaners deserves high priority considering that both high ERI and low self-rated health have predicted chronic diseases and mortality in prospective studies. (c) 2009 Wiley-Liss, Inc.

  10. The effects of crude oil and the effectiveness of cleaner application following oiling on US Gulf of Mexico coastal marsh plants.

    Science.gov (United States)

    Pezeshki, S R; DeLaune, R D; Jugsujinda, A

    2001-01-01

    Field studies were conducted in two different marsh habitats in Louisiana coastal wetlands to evaluate the effects of oiling (using South Louisiana Crude oil, SLC) and the effectiveness of a shoreline cleaner (COREXIT 9580) in removing oil from plant canopies. The study sites represented two major marsh habitats; the brackish marsh site was covered by Spartina patens and the freshwater marsh was covered by Sagittaria lancifolia. Field studies were conducted in each habitat using replicated 5.8 m2 plots that were subjected to three treatments; oiled only, oiled + cleaner (cleaner was used 2 days after oiling), and a control. Plant gas exchange responses, survival, growth, and biomass accumulation were measured. Results indicated that oiling led to rapid reductions in leaf gas exchange rates in both species. However, both species in 'oiled + cleaned' plots displayed improved leaf conductance and CO2 fixation rates. Twelve weeks after treatment initiation, photosynthetic carbon fixation in both species had recovered to normal levels. Over the short-term, S. patens showed more sensitivity to oiling with SLC than S. lancifolia as was evident from the data of the number of live shoots and above-ground biomass. Above-ground biomass remained significantly lower than control in S. patens under 'oiled' and 'oiled + cleaned' treatments while it was comparable to controls in S. lancifolia. These studies indicated that the cleaner removed oil from marsh grasses and alleviated the short-term impact of oil on gas exchange function of the study plants. However, use of cleaner had no detectable effects on above-ground biomass production or regeneration at the end of the first growing season in S. patens. Similarly, no beneficial effects of cleaner on carbon fixation and number of live shoots were apparent beyond 12 weeks in S. lancifolia.

  11. What's in a Name? For A Million Bucks or So, You can Name that School

    Science.gov (United States)

    Altbach, Philip G.

    2006-01-01

    Although "naming rights" have proliferated in American higher education for the past several decades, the phenomenon has recently expanded to extraordinary lengths. In this area, academe fits right in with the larger culture, which has named everything from AutoZone Park to Gillette Stadium to the children's wing of your local hospital. Anything…

  12. A Doctor's Name as a Brand: A Nationwide Survey on Registered Clinic Names in Taiwan.

    Science.gov (United States)

    Chu, Feng-Yuan; Dai, Ying-Xiu; Liu, Jui-Yao; Chen, Tzeng-Ji; Chou, Li-Fang; Hwang, Shinn-Jang

    2018-06-01

    In countries where the private clinics of physicians can be freely named, registering a clinic with a physician's name is one way to make patients familiar with the physician. No previous study had investigated how clinics make use of this method of personal branding. Therefore, the current study analyzed 10,847 private physician Western medicine clinics in Taiwan. Of those clinics, 31.0% ( n = 3363) were named with a physician's full name, 8.9% ( n = 960) with a surname, and 8.1% ( n = 884) with a given name. The proportion of clinics registered with a physician's name was lower in rural areas (37.3%) than in urban (48.5%) and suburban areas (49.2%), respectively. Among clinics with only one kind of specialist, a physician's name was used most frequently in clinics of obstetrics and gynecology (64.9%), otorhinolaryngology (64.1%), and dermatology (63.4%). In Taiwan, fewer than half of clinics used a physician's name as a brand. The sociocultural or strategic factors and real benefits of doing so could be further studied in the future for a better understanding of healthcare services management.

  13. Family-group names in Coleoptera (Insecta)

    Science.gov (United States)

    Bouchard, Patrice; Bousquet, Yves; Davies, Anthony E.; Alonso-Zarazaga, Miguel A.; Lawrence, John F.; Lyal, Chris H. C.; Newton, Alfred F.; Reid, Chris A. M.; Schmitt, Michael; Ślipiński, S. Adam; Smith, Andrew B. T.

    2011-01-01

    Abstract We synthesize data on all known extant and fossil Coleoptera family-group names for the first time. A catalogue of 4887 family-group names (124 fossil, 4763 extant) based on 4707 distinct genera in Coleoptera is given. A total of 4492 names are available, 183 of which are permanently invalid because they are based on a preoccupied or a suppressed type genus. Names are listed in a classification framework. We recognize as valid 24 superfamilies, 211 families, 541 subfamilies, 1663 tribes and 740 subtribes. For each name, the original spelling, author, year of publication, page number, correct stem and type genus are included. The original spelling and availability of each name were checked from primary literature. A list of necessary changes due to Priority and Homonymy problems, and actions taken, is given. Current usage of names was conserved, whenever possible, to promote stability of the classification. New synonymies (family-group names followed by genus-group names): Agronomina Gistel, 1848 syn. nov. of Amarina Zimmermann, 1832 (Carabidae), Hylepnigalioini Gistel, 1856 syn. nov. of Melandryini Leach, 1815 (Melandryidae), Polycystophoridae Gistel, 1856 syn. nov. of Malachiinae Fleming, 1821 (Melyridae), Sclerasteinae Gistel, 1856 syn. nov. of Ptilininae Shuckard, 1839 (Ptinidae), Phloeonomini Ádám, 2001 syn. nov. of Omaliini MacLeay, 1825 (Staphylinidae), Sepedophilini Ádám, 2001 syn. nov. of Tachyporini MacLeay, 1825 (Staphylinidae), Phibalini Gistel, 1856 syn. nov. of Cteniopodini Solier, 1835 (Tenebrionidae); Agronoma Gistel 1848 (type species Carabus familiaris Duftschmid, 1812, designated herein) syn. nov. of Amara Bonelli, 1810 (Carabidae), Hylepnigalio Gistel, 1856 (type species Chrysomela caraboides Linnaeus, 1760, by monotypy) syn. nov. of Melandrya Fabricius, 1801 (Melandryidae), Polycystophorus Gistel, 1856 (type species Cantharis aeneus Linnaeus, 1758, designated herein) syn. nov. of Malachius Fabricius, 1775 (Melyridae), Sclerastes

  14. Family-Group Names In Coleoptera (Insecta

    Directory of Open Access Journals (Sweden)

    Patrice Bouchard

    2011-04-01

    Full Text Available We synthesize data on all known extant and fossil Coleoptera family-group names for the first time. A catalogue of 4887 family-group names (124 fossil, 4763 extant based on 4707 distinct genera in Coleoptera is given. A total of 4492 names are available, 183 of which are permanently invalid because they are based on a preoccupied or a suppressed type genus. Names are listed in a classification framework. We recognize as valid 24 superfamilies, 211 families, 541 subfamilies, 1663 tribes and 740 subtribes. For each name, the original spelling, author, year of publication, page number, correct stem and type genus are included. The original spelling and availability of each name were checked from primary literature. A list of necessary changes due to Priority and Homonymy problems, and actions taken, is given. Current usage of names was conserved, whenever possible, to promote stability of the classification. New synonymies (family-group names followed by genus-group names: Agronomina Gistel, 1848 syn. n. of Amarina Zimmermann, 1832 (Carabidae, Hylepnigalioini Gistel, 1856 syn. n. of Melandryini Leach, 1815 (Melandryidae, Polycystophoridae Gistel, 1856 syn. n. of Malachiinae Fleming, 1821 (Melyridae, Sclerasteinae Gistel, 1856 syn. n. of Ptilininae Shuckard, 1839 (Ptinidae, Phloeonomini Ádám, 2001 syn. n. of Omaliini MacLeay, 1825 (Staphylinidae, Sepedophilini Ádám, 2001 syn. n. of Tachyporini MacLeay, 1825 (Staphylinidae, Phibalini Gistel, 1856 syn. n. of Cteniopodini Solier, 1835 (Tenebrionidae; Agronoma Gistel 1848 (type species Carabus familiaris Duftschmid, 1812, designated herein syn. n. of Amara Bonelli, 1810 (Carabidae, Hylepnigalio Gistel, 1856 (type species Chrysomela caraboides Linnaeus, 1760, by monotypy syn. n. of Melandrya Fabricius, 1801 (Melandryidae, Polycystophorus Gistel, 1856 (type species Cantharis aeneus Linnaeus, 1758, designated herein syn. n. of Malachius Fabricius, 1775 (Melyridae, Sclerastes Gistel, 1856 (type species

  15. Taxonomic names, metadata, and the Semantic Web

    Directory of Open Access Journals (Sweden)

    Roderic D. M. Page

    2006-01-01

    Full Text Available Life Science Identifiers (LSIDs offer an attractive solution to the problem of globally unique identifiers for digital objects in biology. However, I suggest that in the context of taxonomic names, the most compelling benefit of adopting these identifiers comes from the metadata associated with each LSID. By using existing vocabularies wherever possible, and using a simple vocabulary for taxonomy-specific concepts we can quickly capture the essential information about a taxonomic name in the Resource Description Framework (RDF format. This opens up the prospect of using technologies developed for the Semantic Web to add ``taxonomic intelligence" to biodiversity databases. This essay explores some of these ideas in the context of providing a taxonomic framework for the phylogenetic database TreeBASE.

  16. Their Name is Half-Way

    Directory of Open Access Journals (Sweden)

    Elena Bagina

    2014-01-01

    Full Text Available The article is devoted to the phenomenon of the Soviet architecture of the late 1950s – 60s. The name of the article is “Their name is halfway”. It expresses the sense of all the processes occurring both in society and architecture during the Khrushchev Thaw. Developing the socalled Stalin’s Empire in the 1930-1950s, the masters of architecture had travelled only half the way. If the power had not abruptly stopped this movement, we would probably have a unique modern architecture dissimilar to the “international style”. The collapse of the Soviet Union stopped the evolution of architecture again: the unique features of the Soviet architecture of the 1960s ceased to develop. Architects were carried away with ironic games of postmodernism, which led them to deadlock.

  17. Cross domains Arabic named entity recognition system

    KAUST Repository

    Al-Ahmari, S. Saad

    2016-07-11

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  18. Cross domains Arabic named entity recognition system

    KAUST Repository

    Al-Ahmari, S. Saad; Abdullatif Al-Johar, B.

    2016-01-01

    Named Entity Recognition (NER) plays an important role in many Natural Language Processing (NLP) applications such as; Information Extraction (IE), Question Answering (QA), Text Clustering, Text Summarization and Word Sense Disambiguation. This paper presents the development and implementation of domain independent system to recognize three types of Arabic named entities. The system works based on a set of domain independent grammar-rules along with Arabic part of speech tagger in addition to gazetteers and lists of trigger words. The experimental results shown, that the system performed as good as other systems with better results in some cases of cross-domains corpora. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

  19. Naming the Mystery: An Augustinian Ideal

    Directory of Open Access Journals (Sweden)

    Allan Fitzgerald

    2015-03-01

    Full Text Available This article, by noticing Augustine’s constant questioning, shows that he often talks about not knowing and about his need for God’s help to know more. It is therefore better to see how he identifies the mystery than to focus on his answers, because he too recognizes his limits. His intellectual prowess can be seen more clearly when he “names the mystery” than by thinking that he has solved it.

  20. Exploring historical trends using taxonomic name metadata

    Directory of Open Access Journals (Sweden)

    Schenk Ryan

    2008-05-01

    Full Text Available Abstract Background Authority and year information have been attached to taxonomic names since Linnaean times. The systematic structure of taxonomic nomenclature facilitates the ability to develop tools that can be used to explore historical trends that may be associated with taxonomy. Results From the over 10.7 million taxonomic names that are part of the uBio system 4, approximately 3 million names were identified to have taxonomic authority information from the years 1750 to 2004. A pipe-delimited file was then generated, organized according to a Linnaean hierarchy and by years from 1750 to 2004, and imported into an Excel workbook. A series of macros were developed to create an Excel-based tool and a complementary Web site to explore the taxonomic data. A cursory and speculative analysis of the data reveals observable trends that may be attributable to significant events that are of both taxonomic (e.g., publishing of key monographs and societal importance (e.g., world wars. The findings also help quantify the number of taxonomic descriptions that may be made available through digitization initiatives. Conclusion Temporal organization of taxonomic data can be used to identify interesting biological epochs relative to historically significant events and ongoing efforts. We have developed an Excel workbook and complementary Web site that enables one to explore taxonomic trends for Linnaean taxonomic groupings, from Kingdoms to Families.

  1. Naming asteroids for the popularisation of astronomy

    Science.gov (United States)

    Naranjo, O. A.

    2008-06-01

    We give a detailed description of how the naming of asteroids was used as a prize in competitions run by educational institutions and museums. There were two events, one in Venezuela and one in Brazil, which used this as an attractive alternative method for the popularisation of astronomy. The first competition, named Bautizo Espacial (Space Baptism), consisted of scientific stories written by high school students. The second, called Grande Desafio (Big Challenge), was a competition where teams of students were challenged to design and build prototype equipment to fight forest fires. Nationally, both events received wide publicity through newspapers, radio, TV and web pages, reaching many people in both countries. As part of both the events, several activities promoting the public knowledge of astronomy were held. The asteroids that were named in these competitions are just some of the many discovered in a search programme developed by the Group of Theoretical Astrophysics of University of Los Andes in Mérida, Venezuela (Grupo de Astrofisica Teórica de la Universidad de Los Andes) as a mainstream research programme. Finally, Asteroids for the Popularisation of Astronomy has been formally proposed to the IAU as a worldwide programme during the celebration of the International Year of Astronomy in 2009 (IYA2009).

  2. The Mystery of the River Name Mezen

    Directory of Open Access Journals (Sweden)

    Nadezhda V. Kabinina

    2017-11-01

    Full Text Available The article focuses on the origins of the name Mezen that refers to a large river in the north of the European part of Russia. The author critically reviews the earlier etymologies, in which the hydronym has been interpreted on the basis of the Ugric and Balto-Fennic-Sami data, and hypothesizes for Proto-Permic or Finno-Permic origins of the name as an alternative. According to this hypothesis, the name Mezen originates from an old lexical item related to the obsolete Komi-Zyrian mös and Udmurtian -mes (Permic *mεs with the general meaning of ‘source, spring, brook,’ which in toponymy stands for ‘river’ or ‘stream’. In evidence of the former toponymic productivity of this Permic word, the author provides multiple examples of hydronyms with the determinant -mVs to be found on the territory of the Republic of Komi and adjacent regions — the Russian North and the Perm Region (Vaimos, Kochmas, Madmas, Chermos, etc.. The author suggests that the lexical unit correlating with the Komi-Zyrian mös, Udmurtian -mes, and Common Permic *mεs was once part of a more complex term represented not only in the name Mezen, but also in its North Russian “counterparts,” Mezen’ga and Mezenda, as well as in substrate toponymy of the Komi Republic (Mozyn / Mozym = Russian Mezen; Mozimdіn, Mozimlyva, Mozimözin and in some substrate hydronyms of the modern Ob-Ugric areas (Khanty dialectal Mǒśaŋ = Russian Mozym, and Mоsəm = Nazym. Recognizing that ethnolinguistic attribution of the original lexical unit for these names seems problematic, the author is inclined to think that this is an old compound in which the final component, reconstructed as Common Permic *-εŋ, had the meaning of ‘river, stream’. Summing up all phonetic, morphological, semantic, and geographical evidence, the author concludes that the presently multilingual hydronyms of the MVsVn / MVsVm type most likely date back to the dialects of ancient “Permians,” still

  3. By which name should I call thee? The consequences of having multiple names.

    Science.gov (United States)

    Stevenage, Sarah V; Lewis, Hugh G

    2005-11-01

    The nominal competitor effect suggests that, when a person has two names associated with them, recall of either name is more difficult than if they just had one name. Drawing on a connectionist framework, this effect could arise either if multiple names were represented as being connected to a single person identity node (PIN), or if multiple names were represented as being connected via one-to-one links to multiple PINs. Whilst the latter has intuitive appeal, results from two experiments support the former architecture. Having two names connected to a single PIN not only gives rise to a nominal competitor effect (Experiment 1), but also gives rise to a familiarity enhancement effect (Experiment 2). These empirical results are simulated using an extension of Brédart, Valentine, Calder, and Gassi's (1995) connectionist architecture, which reveals that both effects hold even when the association of both names to the PIN is unequal. These results are presented in terms of a more complete model for person recognition, and the representation of semantic information within such a model is examined.

  4. What's in a Name ?The Effect of an Artist's Name on Aesthetic Judgements

    OpenAIRE

    Cleeremans, Axel; Ginsburgh, Victor; Klein, Olivier; Noury, Abdul Ghafar

    2016-01-01

    Both economists and art historians suggest that the name of the artist is important and belongs with the work. We carried out an experiment to explore the influence that the presence and knowledge of an artist’s name exert on aesthetic judgments. Forty participants (20 students majoring in psychology and 20 in art history) were asked to rank twelve works painted by different artists, some of which bore the name of their actual creators, others not. The results demonstrated that the presence o...

  5. Planning levels in naming and reading complex numerals

    NARCIS (Netherlands)

    Meeuwissen, M.H.W.; Roelofs, A.P.A.; Levelt, W.J.M.

    2003-01-01

    On the basis of evidence from studies of the naming and reading of numerals, Ferrand (1999) argued that the naming of objects is slower than reading their names, due to a greater response uncertainty in naming than in reading, rather than to an obligatory conceptual preparation for naming, but not

  6. 27 CFR 40.93 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Changes in Name § 40.93 Change in corporate name. Where there is a change in the name of a corporate... to establish that the corporate name has been changed. (72 Stat. 1421; 26 U.S.C. 5712) Changes in...

  7. 27 CFR 44.103 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Warehouse Proprietors Changes in Name § 44.103 Change in corporate name. Where there is a change in the name... may be necessary to establish that the corporate name has been changed. (72 Stat. 1421; 26 U.S.C. 5712...

  8. Recognising and Interpreting Named Temporal Expressions

    DEFF Research Database (Denmark)

    Brucato, Matteo; Derczynski, Leon; Llorens, Hectjor

    2013-01-01

    This paper introduces a new class of temporal expression – named temporal expressions – and methods for recognising and interpreting its members. The commonest temporal expressions typically contain date and time words, like April or hours. Research into recognising and interpreting these typical...... expressions is mature in many languages. However, there is a class of expressions that are less typical, very varied, and difficult to automatically interpret. These indicate dates and times, but are harder to detect because they often do not contain time words and are not used frequently enough to appear...

  9. Star names their lore and meaning

    CERN Document Server

    Allen, Richard H

    1963-01-01

    Here is an unusual book for anyone who appreciates the beauty and wonder of the stars. Solidly based upon years of thorough research into astronomical writings and observations of the ancient Chinese, Arabic, Euphrates, Hellenic, and Roman civilizations, it is an informative, non-technical excursion into the vast heritage of folklore and history associated with the heavenly bodies. From his studies of the writings of scores of ancient astronomers, the author has come up with a fascinating history of the names various cultures have given the constellations, the literary and folkloristic uses

  10. Named data networking-based smart home

    OpenAIRE

    Syed Hassan Ahmed; Dongkyun Kim

    2016-01-01

    Named data networking (NDN) treats content/data as a “first class citizen” of the network by giving it a “name”. This content “name” is used to retrieve any information, unlike in device-centric networks (i.e., the current Internet), which depend on physical IP addresses. Meanwhile, the smart home concept has been gaining attention in academia and industries; various low-cost embedded devices are considered that can sense, process, store, and communicate data autonomously. In this paper, we s...

  11. Abbreviations of polymer names and guidelines for abbreviating polymer names (IUPAC Recommendations 2014)

    Czech Academy of Sciences Publication Activity Database

    He, J.; Chen, J.; Hellwich, K. H.; Hess, M.; Horie, K.; Jones, R. G.; Kahovec, Jaroslav; Kitayama, T.; Kratochvíl, Pavel; Meille, S. V.; Mita, I.; dos Santos, C.; Vert, M.; Vohlídal, J.

    2014-01-01

    Roč. 86, č. 6 (2014), s. 1003-1015 ISSN 0033-4545 Institutional support: RVO:61389013 Keywords : abbreviations * IUPAC Polymer Division * polymer names Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.492, year: 2014

  12. What's in a Name? Sound Symbolism and Gender in First Names.

    Directory of Open Access Journals (Sweden)

    David M Sidhu

    Full Text Available Although the arbitrariness of language has been considered one of its defining features, studies have demonstrated that certain phonemes tend to be associated with certain kinds of meaning. A well-known example is the Bouba/Kiki effect, in which nonwords like bouba are associated with round shapes while nonwords like kiki are associated with sharp shapes. These sound symbolic associations have thus far been limited to nonwords. Here we tested whether or not the Bouba/Kiki effect extends to existing lexical stimuli; in particular, real first names. We found that the roundness/sharpness of the phonemes in first names impacted whether the names were associated with round or sharp shapes in the form of character silhouettes (Experiments 1a and 1b. We also observed an association between femaleness and round shapes, and maleness and sharp shapes. We next investigated whether this association would extend to the features of language and found the proportion of round-sounding phonemes was related to name gender (Analysis of Category Norms. Finally, we investigated whether sound symbolic associations for first names would be observed for other abstract properties; in particular, personality traits (Experiment 2. We found that adjectives previously judged to be either descriptive of a figuratively 'round' or a 'sharp' personality were associated with names containing either round- or sharp-sounding phonemes, respectively. These results demonstrate that sound symbolic associations extend to existing lexical stimuli, providing a new example of non-arbitrary mappings between form and meaning.

  13. Ultra advanced projects. ; Naming hyper-hightech projects. (Cho) no tsuku project. ; Naming no shikumi

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Y. (Ministry of International Trade and Industry, Tokyo (Japan))

    1992-10-05

    Significance of using 'super' for naming a project of technological development is discussed. Functions of naming are classified into (1) recognition, (2) display and (3) sales-promotion, whereby mechanism of naming of merchandise that is developed through the technique of 3 is considered. Further, the mechanism of naming is discussed in relation to marketing. It is pointed out that naming of merchandise is determined on the basis of (1) concept of planned goods and (2) marketing-mixes composed of goods, price, sales-roots and sales-promotion. The same mechanism works also in a project for technological development. Technical trends are caught and projects are targetted by taking supposed regimes into account, thereby the most suitable mix is formed. The mix in the technological development is assumed to be composed of purpose, specification, regime and sales-promotion. Two examples of the governmental projects by Ministry of International Trade and Industry, 'the big regime for research and development on industrial technologies' and 'the regime for development of the fundamental technologies in the next generation' are introduced and the significance of their naming is described. 2 tabs.

  14. Field Performance Test of an Air-Cleaner with Photocatalysis-Plasma Synergistic Reactors for Practical and Long-Term Use

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Ochiai

    2014-10-01

    Full Text Available A practical and long-term usable air-cleaner based on the synergy of photocatalysis and plasma treatments has been developed. A field test of the air-cleaner was carried out in an office smoking room. The results were compared to previously reported laboratory test results. Even after a treatment of 12,000 cigarettes-worth of tobacco smoke, the air-cleaner maintained high-level air-purification activity (98.9% ± 0.1% and 88% ± 1% removal of the total suspended particulate (TSP and total volatile organic compound (TVOC concentrations, respectively at single-pass conditions. Although the removal ratio of TSP concentrations was 98.6% ± 0.2%, the ratio of TVOC concentrations was 43.8% after a treatment of 21,900 cigarettes-worth of tobacco smoke in the field test. These results indicate the importance of suitable maintenance of the reactors in the air-cleaner during field use.

  15. Microscopic activity patterns in the naming game

    International Nuclear Information System (INIS)

    Dall'Asta, Luca; Baronchelli, Andrea

    2006-01-01

    The models of statistical physics used to study collective phenomena in some interdisciplinary contexts, such as social dynamics and opinion spreading, do not consider the effects of the memory on individual decision processes. In contrast, in the naming game, a recently proposed model of language formation, each agent chooses a particular state, or opinion, by means of a memory-based negotiation process, during which a variable number of states is collected and kept in memory. In this perspective, the statistical features of the number of states collected by the agents become a relevant quantity to understand the dynamics of the model, and the influence of topological properties on memory-based models. By means of a master equation approach, we analyse the internal agent dynamics of the naming game in populations embedded on networks, finding that it strongly depends on very general topological properties of the system (e.g. average and fluctuations of the degree). However, the influence of topological properties on the microscopic individual dynamics is a general phenomenon that should characterize all those social interactions that can be modelled by memory-based negotiation processes

  16. Armenian Demons Called Kaj: Image and Name

    Directory of Open Access Journals (Sweden)

    Armen Y. Petrosyan

    2018-03-01

    Full Text Available The article provides a study of Armenian demons, the kajs, and their superior deity — the dragonslayer Vahagn, in the historical-etymological and ethno-cultural perspective. Specific features of kajs and their leader as imagined by ancient people are identifi ed: they resemble vishap-dragons and devs, live in the mountains and have temples there, make war, hunt, steal wheat and wine from people, love music, arrange weddings, drive people crazy, braid horsehair, and so on. Clear linkages are drawn between Armenian kajs and their leader with the mythological characters of Indo-European (Iranian, Indian traditions. In Armenian, the fi rst meaning of k‘aǰ is ‘good, select; of fi ne / better quality’. This is exactly how some Armenian spirits, including kajs, are often referred to — as “good” — mezane laver, mezne ałekner ‘better than us,’ ałek manuk ‘good youngster / warrior’. This is also true to some other traditions: the Persian az mā behtarān, German Gude (cf. also the names of Indian vasu and sādhya. The article develops the etymology of the name k‘aǰ (a corrected version of that proposed by H. Pedersen in 1906: *swo-sHdhyo- — ‘self / own + right / righteous,’ i.e. ‘good’. This image passed into the Georgian and Ossetian traditions (Georgian kajs, Ossetian kadzi.

  17. Undersea Feature Place Names as of June 2014

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — There are approximately 5100 undersea features with names approved by the United States Board on Geographic Names (BGN) currently in the Geographic Names Data Base...

  18. Power generation from chemically cleaned coals: do environmental benefits of firing cleaner coal outweigh environmental burden of cleaning?

    DEFF Research Database (Denmark)

    Ryberg, Morten W.; Owsianiak, Mikolaj; Laurent, Alexis

    2015-01-01

    Power generation from high-ash coals is a niche technology for power generation, but coal cleaning is deemed necessary to avoid problems associated with low combustion efficiencies and to minimize environmental burdens associated with emissions of pollutants originating from ash. Here, chemical...... beneficiation of coals using acid and alkali–acid leaching procedures is evaluated as a potential coal cleaning technology employing life cycle assessment (LCA). Taking into account the environmental benefits from firing cleaner coal in pulverized coal power plants and the environmental burden of the cleaning...... itself, it is demonstrated that for a wide range of cleaning procedures and types of coal, chemical cleaning generally performs worse than combustion of the raw coals and physical cleaning using dense medium separation. These findings apply for many relevant impact categories, including climate change...

  19. Work-Related Pain and Injury and Barriers to Workers’ Compensation Among Las Vegas Hotel Room Cleaners

    Science.gov (United States)

    Scherzer, Teresa; Rugulies, Reiner; Krause, Niklas

    2005-01-01

    Objectives. We examined the prevalence of work-related pain and injury and explored barriers to and experiences of reporting among workers. Methods. We surveyed 941 unionized hotel room cleaners about work-related pain, injury, disability, and reporting. Results. During the past 12 months, 75% of workers in our study experienced work-related pain, and 31% reported it to management; 20% filed claims for workers’ compensation as a result of work-related injury, and 35% of their claims were denied. Barriers to reporting injury included “It would be too much trouble” (43%), “I was afraid” (26%), and “I didn’t know how” (18%). An estimated 69% of medical costs were shifted from employers to workers. Conclusions. The reasons for underreporting and the extent of claim denial warrant further investigation. Implications for worker health and the precise quantification of shifting costs to workers also should be addressed. PMID:15727981

  20. Work-related pain and injury and barriers to workers' compensation among Las Vegas hotel room cleaners.

    Science.gov (United States)

    Scherzer, Teresa; Rugulies, Reiner; Krause, Niklas

    2005-03-01

    We examined the prevalence of work-related pain and injury and explored barriers to and experiences of reporting among workers. We surveyed 941 unionized hotel room cleaners about work-related pain, injury, disability, and reporting. During the past 12 months, 75% of workers in our study experienced work-related pain, and 31% reported it to management; 20% filed claims for workers' compensation as a result of work-related injury, and 35% of their claims were denied. Barriers to reporting injury included "It would be too much trouble" (43%), "I was afraid" (26%), and "I didn't know how" (18%). An estimated 69% of medical costs were shifted from employers to workers. The reasons for underreporting and the extent of claim denial warrant further investigation. Implications for worker health and the precise quantification of shifting costs to workers also should be addressed.

  1. Disparities by ethnicity, language, and immigrant status in occupational health experiences among Las Vegas hotel room cleaners.

    Science.gov (United States)

    Premji, Stéphanie; Krause, Niklas

    2010-10-01

    We examined disparities in workers' occupational health experiences. We surveyed 941 unionized Las Vegas hotel room cleaners about their experiences with work-related pain and with employers, physicians, and workers' compensation. Data were analyzed for all workers and by ethnicity, language, and immigrant status. Hispanic and English as second language (ESL) workers were more likely than their counterparts to report work-related pain and, along with immigrant workers, to miss work because of this pain. Hispanic, ESL, and immigrant workers were not consistently at a disadvantage with regard to their own responses to work-related pain but were so with respect to reported responses by workers' compensation, physicians, and employers. There are indications of disparities in occupational health experiences within this job title. The use of different group classifications, while implying different mechanisms, produced similar results. © 2010 Wiley-Liss, Inc.

  2. Phonaesthemes and sound symbolism in Swedish brand names

    OpenAIRE

    Abelin, Åsa

    2015-01-01

    This study examines the prevalence of sound symbolism in Swedish brand names. A general principle of brand name design is that effective names should be distinctive, recognizable, easy to pronounce and meaningful. Much money is invested in designing powerful brand names, where the emotional impact of the names on consumers is also relevant and it is important to avoid negative connotations. Customers prefer brand names, which say something about the product, as this reduces product uncertaint...

  3. Exploring the Stakeholders Salience for the adoption the Principles and Tools of Cleaner Production in Brazil Companies

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso Oliveira Neto

    2015-09-01

    Full Text Available Objective – The key objective of this paper is to show the primary environmental influences exerted by the government, economic agents and society on companies for the implementation of the principles and tools of cleaner production (CP, and the attributes (power, legitimacy and urgency used by stakeholders to coerce companies into adopting these principles. Design/methodology/approach – The research method employed was the application of an exploratory survey in 102 Brazilian companies and the multi-varied evaluation of data by means of multiple correspondent analysis. Findings – The study shows that some principles of CP are little used by companies in Brazil. Concerning the influences on the adoption of CP, the government, economic agents and society are singled out as the important influencers. The government influence is manifest through the adoption of environmental regulating measures (power in conjunction with sincere actions in environmental education (influence. The economic agents possess the power, legitimacy and urgency to influence the adoption of CP. Society’s influences are less relevant, in that Brazilian society has much less awareness of sustainable production and consumption as compared to other countries. Practical implications – This study shows that it is vital that Brazilian society learns more about sustainable production, because a society with no environmental conscience is a society with little means to demand the implementation of CP. Originality/value – The results of the study represent an important theoretical contribution in that, at present, there is little literature on the relationship between stakeholders and Cleaner Production. This is the first study in Brazil to address the subject.

  4. Combining Education and Practice Learning in Environmental Management and Cleaner Technology

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik; Jørgensen, Michael Søgaard

    2004-01-01

    to overcome these problems are discussed. The educational principles are presented as a combination of educational learning and practice learning named as reflexive learning. The experience from working with reflexive learning is discussed and relation to the role it can play in creating profes......This chapter argues for a new role for universities in adding the training of (existing) professionals to the core agenda in parallel to academic education and scientific research. Based on experiences from Denmark new challenges both to academic knowledge and training are presented and way...

  5. MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

    Directory of Open Access Journals (Sweden)

    Ni Made Iwan Indrawan

    2015-07-01

    Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

  6. MARKED PERSONAL NAMES: AN ANTROPONIMIC STUDY OF BALINESE STUDENTS’ NAMES IN DENPASAR

    Directory of Open Access Journals (Sweden)

    Ni Made Iwan Indrawan

    2012-07-01

    Full Text Available The research aims to account for the Marked Balinese Students’ Personal Names. Four research problems are studied, namely (1 the criteria used to distinguish the marked names (NDMBmk and the unmarked ones (NDMTBmk, (2 the functions of the markedness, (3 the factors that influence it, and (4 the ideologies that operate behind it. The markedness of personal names reflect a relation between the arbitrariness in language uses and the extralinguistic factors influencing it. In the context of Balinese, the tradition, legal practices, and the globalisation may affect the arbitrariness. In order to determine NDMBmk, criteria of markedness was constructed. According to the criteria, structurally, NDMBmk consist of at least five elements, as Anak Agung Arim Kasunu Arya Penarungan. Behaviorally, they may consist of names not derived from Balinese and/or Sanskrit, such as Giovani on I Gede Adeyaka Giovani, adopt a foreign spelling system as Chrisna on Ni Putu Chrisna Wulandari, or use no markers of Balinese ethnics or caste as Yunisari Wira Putri. Out of 698 sampled names, NDMBmk are found 54. Besides denoting, the marked elements also function to distinguish personal identities, to shape the existence of the name holder, to connote particular perception, and to reflect the changing era. The factors influencing the markedness are the need to express something new, a wish to acculturate, to raise status or keep a distance socially, and to demonstrate a linguistic expertise, or when seeing from the concept of imagery, the factors are the imagery on something new and on social status or distancing. The ideologies behind the phenomenon are globalist, nationalist, and the casteless-Balinese.

  7. EPONYMY BASED ON NAMES OF COMPANIES

    Directory of Open Access Journals (Sweden)

    Éva Kovács

    2016-03-01

    Full Text Available As is generally defined, eponymy, one of the word-formation processes refers to the derivation of a name of a city, country, era, institution, or other place or thing from that of a person such as sandwich, wellington, mackintosh or cardigan. Eponymy can be classified in several ways, some refer to foods (Pizza Margaritha, diseases (Alzheimer disease, places (Washington, scientific laws (Archimedes’s principle and sport terms (Axel jump, whereas others indicate trademarks, brand names (aspirin, prizes, awards (Nobel Prize, inventions (Rubic’s Cube, ideologies (Darwinism, colleges, universities (Stanford University and companies (Ford. The present paper discusses eponyms which denote companies based on the name of their founder(s (e.g. Porsche, Siemens, Gucci, Campari, Cadbury, McDonald’s and Walt Disney, etc. by revealing what kind of a metonymic relationship is manifested in them. Cognitive linguists, such as Lakoff and Johnson (1980, Radden and Kövecses (1999 and Kövecses (2002 state that metonymy is essentially a conceptual phenomenon, in which one conceptual entity, the vehicle, provides mental access to another conceptual entity, the target, within the same idealized cognitive model. In fact, metonymy is part of our everyday way of thinking, and is grounded in experience. Common metonymies include PRODUCER FOR PRODUCT (Pass me the Shakespeare on the top shelf., PLACE FOR EVENT (Iraq nearly cost Tony Blair the premiership, PLACE FOR INSTITUTION (Downing Street refused comment., PART FOR THE WHOLE (She’s not just a pretty face., WHOLE FOR THE PART (England beat Australia in the 2003 Rugby World Cup final. and EFFECT FOR CAUSE (He has a long face.. Following the cognitive approach to metonyms, I tentatively suggest that the metonymy PRODUCER FOR THE PRODUCT can be observed in the case of car makes, products of famous fashion houses, cosmetics and drinks as is illustrated by examples like He’s bought a Ferrari. I ate a McDonald or

  8. 某精细化工企业清洁生产审核实践研究%Cleaner Production Audit on A Fine Chemical Company

    Institute of Scientific and Technical Information of China (English)

    冯俊丽; 张时佳

    2016-01-01

    This paper takes the cleaner production of a company as example to expound the necessity and practical signifi-cance of carrying out cleaner production audit in fine chemical industry. According to eight existing issues of this company, the study provides practical low and high cost clean production project, totally 28 items. After calculating the economic, environmen-tal and social benefit of each project,the practical values of cleaner production audit to a company were pointed out, giving direc-tion of energy-saving emission reduction and low carbon development. This audit discusses the specific practice of cleaner pro-duction in fine chemical industry and it has guiding significance of practicing cleaner production in this domain.%以某企业的清洁生产审核为例,阐述分析精细化工行业开展清洁生产审核的必要性及实践意义.针对该企业存在的八方面问题,提出切实可行的无低费及中高费清洁生产方案共计28项,经核算各方案的经济、环境、社会效益,指出企业开展清洁生产审核的实际价值,为企业节能减排、低碳发展指明方向.本次审核初步探讨了清洁生产在精细化工行业的具体实践,对该行业清洁生产的践行具有一定的指导意义.

  9. Forgotten names: herpetologist Boris Vladimirovich Pestinskiy

    Directory of Open Access Journals (Sweden)

    Cherlin Vladimir Alexandrovich

    2017-12-01

    Full Text Available Boris Pestinskiy was the herpetologist whose name, unfortunately, is lost in history. We decided to restore justice, and in this article we describe the life of this remarkable person. He was really engaged both in painting and in herpetology. After graduating from the Academy of Arts in Leningrad he wrote mainly the portraits of his contemporaries, illustrated magazines, taught children to draw. Some of his paintings were placed in the Russian Museum. He also studied reptiles. He was devoted to Middle Asia and spent the main part of his life in Tashkent. In Tashkent’s zoo he organized the department of reptiles and on the base of it the first in Middle Asia serpentarium. There poison was regularly taken from venomous snakes. Boris studied snakes’ biology, methods of their capture, conditions of their keeping in captivity, organization of the work of the serpentarium. His students were the young men who later became prominent Russian biologists.

  10. Four are named Editors of Earth Interactions

    Science.gov (United States)

    Eric J. Barron of the Earth System Science Center at The Pennsylvania State University has been named chief editor of the new electronic journal, Earth Interactions. This journal will be co-published by AGU, the American Meteorological Society, and the Association of American Geographers. The three societies jointly agreed on the appointment of Barron. Each of the societies also appointed an editor to the board. George F. Hepner for AAG is from the Department of Geography at the University of Utah, David T. Sandwell for AGU is at the Institute of Geophysics and Planetary Physics at Scripps Institution of Oceanography, and Kevin E. Trenberth for AMS is at the Climate and Global Dynamics Division at the National Center for Atmospheric Research.

  11. Recognition of names of eminent psychologists.

    Science.gov (United States)

    Duncan, C P

    1976-10-01

    Faculty members, graduate students, undergraduate majors, and introductory psychology students checked those names they recognized in the list of 228 deceased psychologists, rated for eminence, provided by Annin, Boring, and Watson. Mean percentage recognition was less than 50% for the 128 American psychologists, and less than 25% for the 100 foreign psychologists, by the faculty subjects. The other three groups of subjects gave even lower recognition scores. Recognition was probably also influenced by recency; median year of death of the American psychologists was 1955, of the foreign psychologists, 1943. High recognition (defined as recognition by 80% or more of the faculty group) was achieved by only 34 psychologists, almost all of them American. These highly recognized psychologists also had high eminence ratings, but there was an equal number of psychologists with high eminence ratings that were poorly recognized.

  12. Named data networking-based smart home

    Directory of Open Access Journals (Sweden)

    Syed Hassan Ahmed

    2016-09-01

    Full Text Available Named data networking (NDN treats content/data as a “first class citizen” of the network by giving it a “name”. This content “name” is used to retrieve any information, unlike in device-centric networks (i.e., the current Internet, which depend on physical IP addresses. Meanwhile, the smart home concept has been gaining attention in academia and industries; various low-cost embedded devices are considered that can sense, process, store, and communicate data autonomously. In this paper, we study NDN in the context of smart-home communications, discuss the preliminary evaluations, and describe the future challenges of applying NDN in smart-home applications.

  13. Computer Security: in the name of CERN

    CERN Multimedia

    Stefan Lueders, Computer Security Team

    2015-01-01

    This summer, the American/Canadian dating website Ashley Madison was successfully compromised by a group of hackers (see here) who subsequently published tons of confidential information: addresses, dates of birth, e-mail addresses, ethnicities, genders, names, passwords, payment histories, phone numbers, security questions, sexual preferences, usernames and website activity.   Initially, these attackers blackmailed Ashley Madison and requested that the service be shut down. Later, however, they just made their stolen data public on the Internet. More than 30 million unique e-mail addresses – a hallelujah for miscreants. What can they do with this data? One possibility is blackmailing the people whose e-mail addresses were exposed by threatening to tell their spouses (“Pay me X bitcoins or I will tell your spouse that you are looking for a date!”). Another is targeting those people who have registered with their company e-...

  14. Tough by name, tough by nature.

    Science.gov (United States)

    Baillie, Jonathan

    2015-04-01

    Few beds, one would imagine, could withstand three-quarters of a ton landing on them, but this was the challenge successfully met by a box bed from a furniture manufacturer for challenging behaviour environments, Tough Furniture, when, to reassure a customer that the bed could accommodate 30-stone patients, 13 of the company's staff jumped repeatedly on it to ensure that it would survive intact in a real-world setting. Such testing may seem extreme, but is vital, since much of the company's furniture is destined for environments where patients will abuse, and indeed attempt to destroy, components. As MD David Vesty explained to HEJ editor, Jonathan Baillie, when he visited the company's Shropshire headquarters, it is through manufacturing premium quality cabinet furniture that is both attractive and distinctly non-institutional, but will equally withstand the harshest use, that the company has ensured that its products can live up to the brand name.

  15. A changed name with an evolving function.

    Science.gov (United States)

    Xie, Z

    1995-12-01

    Changes in family planning, which took place in 1994, are described for the Mianzhu County Family Planning Committee and other townships in Sichuan Province. The Committee changed its name to Population Committee. The administrative structure changed at the town and township level. The Secretary of the Chinese Communist Party assigned the former Director of the township Family Planning Office to serve as Director of the General Office of township Population Committee. This administrative change did not take place in the county office. Reforms at the county level were expected to be more gradual, since there was no other model elsewhere in China to follow. The name change reflected a change in function and not a decline in family planning. The function will include implementation, management, and coordination instead of just fertility control. The Committee joined with the Women's Federation in offering premarital education to young people and in establishing a kindergarten for 3-5 year old children. In Qifu there were 18 township businesses, which hired surplus labor. In Qifu preferential treatment in hiring was given to single-child and two-daughter families. Wage labor has resulted in higher income and less time in the fields. The average Qifu township income in 1994 was 1250 yuan. 3200 of the 6100 single-child households were given elderly insurance by the Population Committee. In Dongbei town 4173 households had single children (56.4% of total households). In 1994 average household yearly income was 1400 yuan. 3350 households (80.2% of total single-child households) had an average yearly income of 1500-3000 yuan. 307 households (7.5%) had a yearly income of 3000-5000 yuan. 100 households (2.5%) had income greater than 5000 yuan.

  16. Brand Suicide? Memory and Liking of Negative Brand Names.

    Science.gov (United States)

    Guest, Duncan; Estes, Zachary; Gibbert, Michael; Mazursky, David

    2016-01-01

    Negative brand names are surprisingly common in the marketplace (e.g., Poison perfume; Hell pizza, and Monster energy drink), yet their effects on consumer behavior are currently unknown. Three studies investigated the effects of negative brand name valence on brand name memory and liking of a branded product. Study 1 demonstrates that relative to non-negative brand names, negative brand names and their associated logos are better recognised. Studies 2 and 3 demonstrate that negative valence of a brand name tends to have a detrimental influence on product evaluation with evaluations worsening as negative valence increases. However, evaluation is also dependent on brand name arousal, with high arousal brand names resulting in more positive evaluations, such that moderately negative brand names are equally as attractive as some non-negative brand names. Study 3 shows evidence for affective habituation, whereby the effects of negative valence reduce with repeated exposures to some classes of negative brand name.

  17. Brand Suicide? Memory and Liking of Negative Brand Names

    Science.gov (United States)

    Guest, Duncan; Estes, Zachary; Gibbert, Michael; Mazursky, David

    2016-01-01

    Negative brand names are surprisingly common in the marketplace (e.g., Poison perfume; Hell pizza, and Monster energy drink), yet their effects on consumer behavior are currently unknown. Three studies investigated the effects of negative brand name valence on brand name memory and liking of a branded product. Study 1 demonstrates that relative to non-negative brand names, negative brand names and their associated logos are better recognised. Studies 2 and 3 demonstrate that negative valence of a brand name tends to have a detrimental influence on product evaluation with evaluations worsening as negative valence increases. However, evaluation is also dependent on brand name arousal, with high arousal brand names resulting in more positive evaluations, such that moderately negative brand names are equally as attractive as some non-negative brand names. Study 3 shows evidence for affective habituation, whereby the effects of negative valence reduce with repeated exposures to some classes of negative brand name. PMID:27023872

  18. Brand Reputation and the Cost of Capital: Evidence of Adopting a Brand Name as the Corporate Name

    OpenAIRE

    YiLin Wu

    2011-01-01

    This paper studies how the capital market perceives brand name adoption. I distinguish between brand adoption and radical type of corporate name change. A brand adoption name change occurs when the firm adopts one of its well-established brands as its new corporate name and a radical type occurs when the new name is semantically unrelated to firm history. Improved profitability and increased net investment accompany brand name adoption. After controlling for changes in the competing informati...

  19. What's in a name? Group fitness class names and women's reasons for exercising.

    Science.gov (United States)

    Brown, Theresa C; Miller, Bridget M; Adams, Bailey M

    2017-01-01

    The benefits of intrinsic exercise motivation are well recognized, yet extrinsically focused group-fitness class names/descriptions dominate the fitness industry. To explore the impact of how fitness classes are marketed, women (N = 389) were asked to indicate their preference for either intrinsically or extrinsically focused fitness classes based on title/description. Participants who favored intrinsic class names/descriptions were more likely to report greater interest/enjoyment, perceived competence, and greater effort and report exercising for health/fitness-related reasons. Those favoring extrinsic class names/descriptions were more likely to experience tension/pressure when exercising and report exercising for appearance/weight-related reasons. The results demonstrate the importance of wording when marketing fitness classes.

  20. Naming Lunar Mare Basalts: Quo Vadimus Redux

    Science.gov (United States)

    Ryder, G.

    1999-01-01

    Nearly a decade ago, I noted that the nomenclature of lunar mare basalts was inconsistent, complicated, and arcane. I suggested that this reflected both the limitations of our understanding of the basalts, and the piecemeal progression made in lunar science by the nature of the Apollo missions. Although the word "classification" is commonly attached to various schemes of mare basalt nomenclature, there is still no classification of mare basalts that has any fundamental grounding. We remain basically at a classification of the first kind in the terms of Shand; that is, things have names. Quoting John Stuart Mill, Shand discussed classification of the second kind: "The ends of scientific classification are best answered when the objects are formed into groups respecting which a greater number of propositions can be made, and those propositions more important than could be made respecting any other groups into which the same things could be distributed." Here I repeat some of the main contents of my discussion from a decade ago, and add a further discussion based on events of the last decade. A necessary first step of sample studies that aims to understand lunar mare basalt processes is to associate samples with one another as members of the same igneous event, such as a single eruption lava flow, or differentiation event. This has been fairly successful, and discrete suites have been identified at all mare sites, members that are eruptively related to each other but not to members of other suites. These eruptive members have been given site-specific labels, e.g., Luna24 VLT, Apollo 11 hi-K, A12 olivine basalts, and Apollo 15 Green Glass C. This is classification of the first kind, but is not a useful classification of any other kind. At a minimum, a classification is inclusive (all objects have a place) and exclusive (all objects have only one place). The answer to "How should rocks be classified?" is far from trivial, for it demands a fundamental choice about nature

  1. Recommended conservation of the names Streptococcus sanguis, Streptococcus rattus, Streptococcus cricetus, and seven other names included in the Approved Lists of Bacterial Names. Request for an opinion

    DEFF Research Database (Denmark)

    Kilian, Mogens

    2001-01-01

    With reference to the first Principle of the International Code of Nomenclature of Bacteria, which emphasizes stability of names, it is proposed that the original names Streptococcus sanguis, Streptococcus rattus, Streptococcus cricetus, Erwinia ananas, Eubacterium tarantellus, Lactobacillus sake......, Nitrosococcus oceanus, Pseudomonas betle, Rickettsia canada and Streptomyces rangoon, all included in the Approved Lists of Bacterial Names, be conserved. Request for an Opinion...

  2. VLT Unit Telescopes Named at Paranal Inauguration

    Science.gov (United States)

    1999-03-01

    General, speeches were delivered by the President of the ESO Council and the President of Chile. The speakers praised the great achievement of bringing the very complex, high-technology VLT project this far so successfully and also the wonderful new opportunities for front-line research with this new facility. This would not have been possible without excellent cooperation between the many parties to this project, individuals as well as research institutes, companies and governments, all working towards a common goal. The ceremony was concluded with a discourse on "Understanding the Universe" by Physics Nobel Prize winner, Professor Carlo Rubbia, former Director of CERN. At the end of the day, the President of the ESO Council, the ESO Director General and the Heads of Delegations had the opportunity to witness an observing session with the UT1 from the VLT Control Room. The 300 other guests followed this event via internal video broadcast. Mapuche names for the Unit Telescopes It had long been ESO's intention to provide "real" names to the four VLT Unit Telescopes, to replace the current, somewhat dry and technical designations as UT1 to UT4. Four meaningful names of objects in the sky in the Mapuche language were chosen. This indigeneous people lives mostly in the area south of Santiago de Chile. An essay contest was arranged in this connection among schoolchildren of the Chilean II Region of which Antofagasta is the capital to write about the implications of these names. It drew many excellent entries dealing with the rich cultural heritage of ESO's host country. The jury was unanimous in its choice of the winning essay. This was submitted by 17-year old Jorssy Albanez Castilla from Chuquicamata near the city of Calama. She received the prize, an amateur telescope, during the Paranal Inauguration. Henceforth, the four Unit Telescopes will be known as ANTU (UT1; pronounced an-too ; The Sun), KUEYEN (UT2; qua-yen , like in "quake"; The Moon), MELIPAL (UT3; me-li-pal ; The

  3. Is visual attention automatically attracted to one's own name?

    DEFF Research Database (Denmark)

    Bundesen, C; Kyllingsbæk, Søren; Houmann, K J

    1997-01-01

    Subjects were presented with briefly exposed visual displays of words that were common first names with a length of four to six letters. In the main experiment, each display consisted of four words: two names shown in red and two shown in white. The subject's task was to report the red names (tar......, visual attention was not automatically attracted by the subject's own name....

  4. An Exploratory Study Of The Meaning And Perception Of Names ...

    African Journals Online (AJOL)

    In Nigeria, personal names particularly indigenous names are not arbitrarily given, they bear significant connotative meanings, reflecting the circumstance surrounding the birth of the bearer and the belief and philosophy of the name giver. The significance placed on names gives it immense psychological undertones.

  5. 37 CFR 10.35 - Firm names and letterheads.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Firm names and letterheads... Office Code of Professional Responsibility § 10.35 Firm names and letterheads. (a) A practitioner shall not use a firm name, letterhead, or other professional designation that violates § 10.31. A trade name...

  6. 48 CFR 52.211-6 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Brand name or equal. 52....211-6 Brand name or equal. As prescribed in 11.107(a), insert the following provision: Brand Name or Equal (AUG 1999) (a) If an item in this solicitation is identified as “brand name or equal,” the...

  7. 27 CFR 1.40 - Change of name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change of name. 1.40... Amendment and Duration of Basic Permits § 1.40 Change of name. In the event of any change in the name (trade or corporate name) of a permittee, or, in the event a permittee desires to engage in operations under...

  8. 27 CFR 40.511 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... corporate name. When there is a change in the corporate name of a manufacturer of processed tobacco, the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 40.511... PROCESSED TOBACCO Manufacture of Processed Tobacco Changes After Qualification § 40.511 Change in name. (a...

  9. 27 CFR 41.222 - Change in corporate name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in corporate name... Change in corporate name. Where there is a change in the corporate name of an importer of tobacco... corporate name has been changed. [T.D. ATF-422, 64 FR 71953, Dec. 22, 1999. Redesignated and amended by T.D...

  10. The proper name as starting point for basic reading skills

    NARCIS (Netherlands)

    Both-De Vries, Anna C.; Bus, Adriana G

    Does alphabetic-phonetic writing start with the proper name and how does the name affect reading and writing skills? Sixty 4- to 5(1/2)-year-old children from middle SES families with Dutch as their first language wrote their proper name and named letters. For each child we created unique sets of

  11. Parents' Perspectives on Adopting English Names in Taiwan

    Science.gov (United States)

    Huang, Chiu-Yen; Ke, I-Chung

    2016-01-01

    This study investigated the adoption of English names in Taiwan through questionnaires and interviews with parents of junior high school students. In total, 564 parents filled out a questionnaire regarding their adoption of an English name, reasons for needing an English name, and their perspectives about their child's English name. We interviewed…

  12. A Discrete Model for Color Naming

    Directory of Open Access Journals (Sweden)

    J. M. Boi

    2007-01-01

    Full Text Available The ability to associate labels to colors is very natural for human beings. Though, this apparently simple task hides very complex and still unsolved problems, spreading over many different disciplines ranging from neurophysiology to psychology and imaging. In this paper, we propose a discrete model for computational color categorization and naming. Starting from the 424 color specimens of the OSA-UCS set, we propose a fuzzy partitioning of the color space. Each of the 11 basic color categories identified by Berlin and Kay is modeled as a fuzzy set whose membership function is implicitly defined by fitting the model to the results of an ad hoc psychophysical experiment (Experiment 1. Each OSA-UCS sample is represented by a feature vector whose components are the memberships to the different categories. The discrete model consists of a three-dimensional Delaunay triangulation of the CIELAB color space which associates each OSA-UCS sample to a vertex of a 3D tetrahedron. Linear interpolation is used to estimate the membership values of any other point in the color space. Model validation is performed both directly, through the comparison of the predicted membership values to the subjective counterparts, as evaluated via another psychophysical test (Experiment 2, and indirectly, through the investigation of its exploitability for image segmentation. The model has proved to be successful in both cases, providing an estimation of the membership values in good agreement with the subjective measures as well as a semantically meaningful color-based segmentation map.

  13. A Discrete Model for Color Naming

    Science.gov (United States)

    Menegaz, G.; Le Troter, A.; Sequeira, J.; Boi, J. M.

    2006-12-01

    The ability to associate labels to colors is very natural for human beings. Though, this apparently simple task hides very complex and still unsolved problems, spreading over many different disciplines ranging from neurophysiology to psychology and imaging. In this paper, we propose a discrete model for computational color categorization and naming. Starting from the 424 color specimens of the OSA-UCS set, we propose a fuzzy partitioning of the color space. Each of the 11 basic color categories identified by Berlin and Kay is modeled as a fuzzy set whose membership function is implicitly defined by fitting the model to the results of an ad hoc psychophysical experiment (Experiment 1). Each OSA-UCS sample is represented by a feature vector whose components are the memberships to the different categories. The discrete model consists of a three-dimensional Delaunay triangulation of the CIELAB color space which associates each OSA-UCS sample to a vertex of a 3D tetrahedron. Linear interpolation is used to estimate the membership values of any other point in the color space. Model validation is performed both directly, through the comparison of the predicted membership values to the subjective counterparts, as evaluated via another psychophysical test (Experiment 2), and indirectly, through the investigation of its exploitability for image segmentation. The model has proved to be successful in both cases, providing an estimation of the membership values in good agreement with the subjective measures as well as a semantically meaningful color-based segmentation map.

  14. A public health physician named Walter Leser.

    Science.gov (United States)

    Mello, Guilherme Arantes; Bonfim, José Ruben de Alcântara

    2015-09-01

    A brief review of the career of the public health physician Walter Sidney Pereira Leser, who died in 2004 aged 94. Self-taught, from his 1933 doctoral thesis he became a country reference in the field of statistics and epidemiology, with dozens of studies and supervisions. In the clinical field he is one of the founders of Fleury Laboratory, and participates in the creation of CREMESP. As an academic, Leser was a professor at the Escola de Sociologia e Política de São Paulo, Escola Paulista de Medicina e Faculdade de Farmácia e Odontologia da USP. Also, Leser introduced objective tests in the college entrance examination, and led the creation of CESCEM and Carlos Chagas Foundation. In the Escola Paulista de Medicina he created the first Preventive Medicine Department of the country. As a public official, he was secretary of the State Department of Health of São Paulo between 1967 and 1971 and between 1975 and 1979, responsible for extensive reforms and innovations. Among the most remembered, the creation of sanitary medical career. Throughout this legacy, he lent his name to the "Medal of Honor and Merit Public Health Management" of the State of São Paulo.

  15. SMC 1 or What's in a Name?

    Science.gov (United States)

    Dickel, H. R.

    What's in a name? everything! SMC 1 is a planetary nebula in the Large Magellanic Cloud! This new planetary nebula near the LMC was noted by Savage, Murdin and Clark (in The Observatory 1982); it is also known as SMP LMC 104A (Sanduleak, MacConnell, and Philip in PASP 1978). In an effort to promote clear and unambiguous identification of all astronomical objects outside the solar system, the IAU Task Group on Designations attempts to clarify existing astronomical designations and the TG reviews, updates, and advertises the IAU Recommendations for Nomenclature. The following documents on the Web are provided as a service to astronomers to help them with designating astronomical sources of radiation outside the solar system: How to refer to a source or designate a new one: instructions IAU Recommendations for Nomenclature: nomenclature Second Reference Dictionary of Nomenclature of Celestial Objects: dictionary **NEW** (pre-)Registry of New Acronyms: acronym registry The Task Group in collaboration with several editors of astronomical journals and managers of large data archives is now studying the feasibility of an automated system to detect nonconforming designations when an article and/or survey data are submitted for publication and/or to an electronic archive. H. Dickel is available during the Symposium to discuss your designation concerns and to offer possible solutions.

  16. Anatomical eponyms - unloved names in medical terminology.

    Science.gov (United States)

    Burdan, F; Dworzański, W; Cendrowska-Pinkosz, M; Burdan, M; Dworzańska, A

    2016-01-01

    Uniform international terminology is a fundamental issue of medicine. Names of various organs or structures have developed since early human history. The first proper anatomical books were written by Hippocrates, Aristotle and Galen. For this reason the modern terms originated from Latin or Greek. In a modern time the terminology was improved in particular by Vasalius, Fabricius and Harvey. Presently each known structure has internationally approved term that is explained in anatomical or histological terminology. However, some elements received eponyms, terms that incorporate the surname of the people that usually describe them for the first time or studied them (e.g., circle of Willis, follicle of Graff, fossa of Sylvious, foramen of Monro, Adamkiewicz artery). Literature and historical hero also influenced medical vocabulary (e.g. Achilles tendon and Atlas). According to various scientists, all the eponyms bring colour to medicine, embed medical traditions and culture to our history but lack accuracy, lead of confusion, and hamper scientific discussion. The current article presents a wide list of the anatomical eponyms with their proper anatomical term or description according to international anatomical terminology. However, since different eponyms are used in various countries, the list could be expanded.

  17. BDNLS - BESSY device name location service

    International Nuclear Information System (INIS)

    Engel, D.; Laux, P.; Mueller, R.

    2012-01-01

    Initially the relational database (RDB) for control system configuration at BESSY has been built around the device concept. Maintenance and consistency issues as well as complexity of scripts generating the configuration data, triggered the development of a novel, generic RDB structure based on hierarchies of named nodes with attribute/ value pairs. Unfortunately, it turned out that usability of this generic RDB structure for a comprehensive configuration management relies on sophisticated data maintenance tools. On this background BDNLS, a new database management tool, is currently under development using the framework of the Eclipse Rich Client Platform. It uses the Model View Controller (MVC) layer of JFace to cleanly separate retrieval processes, data path, data visualization and actualization. It is based on extensible configurations defined in XML allowing to chain SQL calls and compose profiles for various cases. It solves the problem of data key forwarding to the subsequent SQL statement. BDNLS has the potential to map various levels of complexity into the XML configurations. This provides usable, tailored database access to configuration maintainers for different underlying database structures. Based on Eclipse, the integration of BDNLS into Control System Studio is straight forward. (authors)

  18. Method and System for Name Resolution Across Heterogeneous Architectures

    Science.gov (United States)

    Sevilla, Spencer (Inventor); Mahadevan, Priya (Inventor); Garcia-Luna-Aceves, Jose J. (Inventor)

    2018-01-01

    One embodiment of the present invention provides a system for resolving a name request in a network comprising a plurality of groups that use different name-resolution schemes. During operation, the system receives, at a first group, the name request; identifies a parent group of the first group, which is a member of the parent group; and in response to failing to resolve the name request within the first group, forwards the name request to the identified parent group.

  19. 27 CFR 46.126 - Change in name or address.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name or address... (occupational) Tax Stamps § 46.126 Change in name or address. (a) Change in name. If there is a change in the corporate or firm name, or in the trade name, as shown on TTB Form 5630.5t, the taxpayer must file an...

  20. Improved Vocabulary Production after Naming Therapy in Aphasia: Can Gains in Picture Naming Generalise to Connected Speech?

    Science.gov (United States)

    Conroy, Paul; Sage, Karen; Ralph, Matt Lambon

    2009-01-01

    Background: Naming accuracy for nouns and verbs in aphasia can vary across different elicitation contexts, for example, simple picture naming, composite picture description, narratives, and conversation. For some people with aphasia, naming may be more accurate to simple pictures as opposed to naming in spontaneous, connected speech; for others,…

  1. Temporal Features of the Differentiation between Self-Name and Religious Leader Name among Christians: An ERP Study

    Directory of Open Access Journals (Sweden)

    Ruixue Xia

    2018-01-01

    Full Text Available Existing neuroimaging studies have shown that religion, as a subjective culture, can influence self-referential processing. However, the time course of this impact remains unclear. The present study examined how Christians process their own names, the name of their religious leader (i.e., Jesus, and a famous person’s name (i.e., Yao Ming. Behavioral and EEG data were recorded while the participants performed a name-color judgment task for these three names. The behavioral data showed no significant differences in reaction time or accuracy among the names. However, the ERP data showed that the P200 and P300 amplitudes elicited by the self-name and religious leader name were larger than those elicited by the famous name. Furthermore, the self-name also elicited a larger P300 amplitude than the religious leader name did. These results suggested that both the self-name and the religious leader name were processed preferentially due to their important social value for the self as compared to a generally famous name. Importantly, the dissociation between the self-name and the religious leader name was observed at a high-order cognitive stage, which might be attributed to their different roles in one’s self-concept.

  2. The National Geographic Names Data Base: Phase II instructions

    Science.gov (United States)

    Orth, Donald J.; Payne, Roger L.

    1987-01-01

    The Geographic Names Information System is a computer-based information system developed to meet major national needs by providing information for named entities in the United States, its territories, and outlying areas. The National Geographic Names Data Base, a component of the Geographic Names Information System, currently contains most names and associated information recorded on the 1:24,000-scale (or largest scale available) topographic maps of the U.S. Geological Survey. The work involved in this initial compilation of names shown on the topographic-map series, and the development and editing of the National Geographic Names Data Base, is referred to as Phase I. Optimal use and effectiveness of an automated names system require that the names of features

  3. Fast, Inclusive Searches for Geographic Names Using Digraphs

    Science.gov (United States)

    Donato, David I.

    2008-01-01

    An algorithm specifies how to quickly identify names that approximately match any specified name when searching a list or database of geographic names. Based on comparisons of the digraphs (ordered letter pairs) contained in geographic names, this algorithmic technique identifies approximately matching names by applying an artificial but useful measure of name similarity. A digraph index enables computer name searches that are carried out using this technique to be fast enough for deployment in a Web application. This technique, which is a member of the class of n-gram algorithms, is related to, but distinct from, the soundex, PHONIX, and metaphone phonetic algorithms. Despite this technique's tendency to return some counterintuitive approximate matches, it is an effective aid for fast, inclusive searches for geographic names when the exact name sought, or its correct spelling, is unknown.

  4. Evaluation of cleaner production audit in pharmaceutical production industry: case study of the pharmaceutical plant in Dalian, P. R. China

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhi-dong [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China); Zhang, Shu-shen; Zhang, Yun [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Zhang, Yong; Wei, Li [Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China)

    2011-02-15

    The pharmaceutical industry in China makes an important contribution to the national economy. However, the associated pollution problems cause gradual deterioration of the environment and impact adversely on the local community. Cleaner production (CP) technology, an effective way to reduce waste emission and save resources, has been widely employed in the pharmaceutical industry in the developed countries. Such technologies have been applied in a number of factories in China, although there is no integrated assessment and implementation procedure for implementing CP technologies in pharmaceutical plants. To solve such problems, a series of CP options are proposed and assessed here. CP is a powerful tool for decreasing waste production, limiting environmental pollution and natural resource depletion. Moreover, the return on investment in CP is quick, so it would seem that CP activities should be very much in demand by enterprises. Reality is less optimistic: frequently only limited interest is expressed, even after an explanation; business people hesitate to become actively involved. The processes in the pharmaceutical production industry produce a vast amount of waste, including wastewater with high concentrations of organic substances (the principal component), solid waste, and organic off-gas. To solve such problems, a series of CP options are proposed and assessed in this study. Having consideration to environmental impacts and economic efficiency, four groups of medium/high cost CP options were screened in an integrated assessment. To verify the proposed options, a case study was conducted in Degussa Luyuan, Northeast China. The characteristics of resource consumption and waste emission during the production process were identified. The proposed options were evaluated according to different aspects. An integrated CP system based on the proposed options was designed and then implemented in the factory. In three years of practical use, the productivity and

  5. Age of acquisition and word frequency in written picture naming.

    Science.gov (United States)

    Bonin, P; Fayol, M; Chalard, M

    2001-05-01

    This study investigates age of acquisition (AoA) and word frequency effects in both spoken and written picture naming. In the first two experiments, reliable AoA effects on object naming speed, with objective word frequency controlled for, were found in both spoken (Experiment 1) and written picture naming (Experiment 2). In contrast, no reliable objective word frequency effects were observed on naming speed, with AoA controlled for, in either spoken (Experiment 3) or written (Experiment 4) picture naming. The implications of the findings for written picture naming are briefly discussed.

  6. Should general practitioners call patients by their first names?

    Science.gov (United States)

    McKinstry, B

    1990-10-06

    To assess the acceptability to patients of the use of patients' first names by doctors and doctors' first names by patients in general practice. An administered questionnaire survey. 5 General practices in Lothian. 475 Patients consulting 30 general practitioners. Response by patients to questionnaire on attitude to use of first names. Most of the patients either liked (223) or did not mind (175) being called by their first names. Only 77 disliked it, most of whom were aged over 65. Most patients (324) did not, however, want to call the doctor by his or her first name. General practitioners should consider using patients' first names more often, particularly with younger patients.

  7. Job strain associated with increases in ambulatory blood and pulse pressure during and after work hours among female hotel room cleaners.

    Science.gov (United States)

    Feaster, Matt; Krause, Niklas

    2018-06-01

    Previously documented elevated hypertension rates among Las Vegas hotel room cleaners are hypothesized to be associated with job strain. Job strain was assessed by questionnaire. Ambulatory blood pressure (ABP) was recorded among 419 female cleaners from five hotels during 18 waking hours. Multiple linear regression models assessed associations of job strain with ABP and pulse pressure for 18-h, work hours, and after work hours. Higher job strain was associated with increased 18-h systolic ABP, after work hours systolic ABP, and ambulatory pulse pressure. Dependents at home but not social support at work attenuated effects. Among hypertensive workers, job strain effects were partially buffered by anti-hypertensive medication. High job strain is positively associated with blood pressure among female hotel workers suggesting potential for primary prevention at work. Work organizational changes, stress management, and active ABP surveillance and hypertension management should be considered for integrated intervention programs. © 2018 Wiley Periodicals, Inc.

  8. Analysis of socio-environmental benefits from the implementation of cleaner production strategies in the agricultural sector of the middle reaches of the river chinchiná, colombia

    OpenAIRE

    Florez Yepes, Gloria Yaneth; Calderon Cuartas, Paola Andrea

    2014-01-01

    The purpose of this paper is to assess the socio-environmental benefits generated by the implementation of cleaner production strategies in the agriculture and livestock sectors, in the middle part of the Chinchina river basin, Colombia. The methodology involves recording of field data on the basis of interviews and semi-structured dialogue; processing and analysis of data on the basis of matrix adaptation and network diagramming; and assessment of socio-environmental benefits, with determina...

  9. Study on demetalization of sewage sludge by sequential extraction before liquefaction for the production of cleaner bio-oil and bio-char.

    Science.gov (United States)

    Leng, Lijian; Yuan, Xingzhong; Shao, Jianguang; Huang, Huajun; Wang, Hou; Li, Hui; Chen, Xiaohong; Zeng, Guangming

    2016-01-01

    Demetalization of sewage sludge (SS) by sequential extraction before liquefaction was implemented to produce cleaner bio-char and bio-oil. Demetalization steps 1 and 2 did not cause much organic matter loss on SS, and thus the bio-oil and bio-char yields and the compositions of bio-oils were also not affected significantly. However, the demetalization procedures resulted in the production of cleaner bio-chars and bio-oils. The total concentrations and the acid soluble/exchangeable fraction (F1 fraction, the most toxic heavy metal fraction) of heavy metals (Cu, Cr, Pb, Zn, and Cd) in these products were significantly reduced and the environmental risks of these products were also relived considerably compared with those produced from raw SS, respectively. Additionally, these bio-oils had less heavy fractions. Demetalization processes with removal of F1 and F2 fractions of heavy metals would benefit the production of cleaner bio-char and bio-oil by liquefaction of heavy metal abundant biomass like SS. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Implementing cleaner production in an automotive company: an application of material input per unit of service tool to measure environmental and economic advantages

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2017-09-01

    Full Text Available Environmental impact reduction has been a growing concern of the automotive industry. One of the main challenges is to implement Cleaner Production as a tool to reduce environmental impacts and provide financial profits. The purpose of this article was to evaluate the environmental impact and economic gains by implementing Cleaner Production, using an unexplored approach, in a company of the automotive sector. The research approach used was a case study, carried out by observation and semi-structured surveys. The production process chosen was updated, so technologies were changed to reduce biotic and abiotic disposal. For the analysis of environmental impacts, the ‘Material Input Per Unit of Service’ tool (MIPS was used, in which data was used to calculate: annual net profit; return on investment (% and return on investment for a period. The results showed that Cleaner Production implementation focusing on changing technology in the production process caused a 75% reduction in environmental impact, and a 62.7% decrease in production costs. Although of this study considers only one case to test the procedure applicability, it can be easily repeated in other more complex systems, by merely making the necessary adjustments due to the complexity of the processes involved.

  11. Catalysts for cleaner combustion of coal, wood and briquettes sulfur dioxide reduction options for low emission sources

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.V. [Global Environmental Solutions, Inc., Morton Grove, IL (United States)

    1995-12-31

    Coal fired, low emission sources are a major factor in the air quality problems facing eastern European cities. These sources include: stoker-fired boilers which feed district heating systems and also meet local industrial steam demand, hand-fired boilers which provide heat for one building or a small group of buildings, and masonary tile stoves which heat individual rooms. Global Environmental Systems is marketing through Global Environmental Systems of Polane, Inc. catalysts to improve the combustion of coal, wood or fuel oils in these combustion systems. PCCL-II Combustion Catalysts promotes more complete combustion, reduces or eliminates slag formations, soot, corrosion and some air pollution emissions and is especially effective on high sulfur-high vanadium residual oils. Glo-Klen is a semi-dry powder continuous acting catalyst that is injected directly into the furnace of boilers by operating personnel. It is a multi-purpose catalyst that is a furnace combustion catalyst that saves fuel by increasing combustion efficiency, a cleaner of heat transfer surfaces that saves additional fuel by increasing the absorption of heat, a corrosion-inhibiting catalyst that reduces costly corrosion damage and an air pollution reducing catalyst that reduces air pollution type stack emissions. The reduction of sulfur dioxides from coal or oil-fired boilers of the hand fired stoker design and larger, can be controlled by the induction of the Glo-Klen combustion catalyst and either hydrated lime or pulverized limestone.

  12. A study on the optimal design of a cyclone system for vacuum cleaner with the consideration of house dust

    International Nuclear Information System (INIS)

    Ha, Gun Ho; Kim, Eung Dal; Kim, Young Soo; Lee, Jae Keun; Ahn, Young Chull; Kim, Dong Gyu

    2011-01-01

    Cyclone, a type of particle collector widely used in the field of ambient sampling and industrial particulate control, is the principal type of gas-solids separator that use a centrifugal force. The goal of this study is to transform conventional cyclone into a new type of cyclone that can be used for the household vacuum cleaners. To meet the goal, first, the analysis about local environment and dust is carried out. Second, it must have enough high-efficiency not to reduce suction power due to clogging of exhaust filter unit. Two single cyclones with central-hopper-dust-outlet and side-wall-dust-outlet and a twin cyclone are designed and fabricated to evaluate, and compare, their dust collection efficiencies and pressure drops. The measurements of separation efficiency for dust by using DMT test dust type 08 are carried out. House dust experiment is additionally performed to check the local matters applicability such as tissue papers, fur and hairs. The collection efficiency of the twin cyclone is found to be 3-6% greater than those of two single cyclones with the same body diameter, inlet and inner cylinder diameter. Twin cyclone with a large body diameter, a small inner cylinder diameter, a short inner cylinder, a narrow inlet has high separation efficiency. This result indicates the possibility of achieving higher collection efficiencies with a twin cyclone

  13. Surface chemistry of a pine-oil cleaner and other terpene mixtures with ozone on vinyl flooring tiles.

    Science.gov (United States)

    Ham, Jason E; Wells, J Raymond

    2011-04-01

    Indoor environments are dynamic reactors where consumer products (such as cleaning agents, deodorants, and air fresheners) emit volatile organic compounds (VOCs) that can subsequently interact with indoor oxidants such as ozone (O(3)), hydroxyl radicals, and nitrate radicals. Typically, consumer products consist of mixtures of VOCs and semi-VOCs which can react in the gas-phase or on surfaces with these oxidants to generate a variety of oxygenated products. In this study, the reaction of a pine-oil cleaner (POC) with O(3) (100ppb) on a urethane-coated vinyl flooring tile was investigated at 5% and 50% relative humidity. These results were compared to previous α-terpineol+O(3) reactions on glass and vinyl surfaces. Additionally, other terpene and terpene alcohol mixtures were formulated to understand the emission profiles as seen in the POC data. Results showed that the α-terpineol+O(3) reaction products were the prominent species that were also observed in the POC/O(3) surface experiments. Furthermore, α-terpineol+O(3) reactions generate the largest fraction of oxygenated products even in equal mixtures of other terpene alcohols. This finding suggests that the judicial choice of terpene alcohols for inclusion in product formulations may be useful in reducing oxidation product emissions. Published by Elsevier Ltd.

  14. Fueling our future: four steps to a new, reliable, cleaner, decentralized energy supply based on hydrogen and fuel cells

    International Nuclear Information System (INIS)

    Evers, A.A.

    2004-01-01

    'Full text:' This manuscript demonstrates the possible driving factors and necessary elements needed to move Hydrogen and Fuel Cells (H2/FC) to worldwide commercialisation. Focusing not only on the technology itself, we look at the 'bigger picture' explaining how certain trends have impacted the progress of new technologies developments in the past. In this process, the consumer has played and will continue to play the key and leading role. We also examine different Distributed Generation scenarios including distributed generation via fuel cells for automotive applications which may be the catalyst to the Hydrogen Economy. One possible step could be the use of Personal Power Cars equipped with Fuel Cells which not only drive on Hydrogen, but also supply (while standing) electricity /heat to residential and commercial buildings. With 1.3 billion potential customers, P.R. China is one country where such a scenario may fit. The up-and-coming Chinese H2/FC industry deals with applied fundamental research such as advances in Hydrogen production from Natural Gas, Methanol and Gasoline. The current activities in P.R. China certain to further accelerate the trend towards the coming Hydrogen Economy, together with the steps necessary to achieve a new reliable, cleaner and decentralized Energy Supply based on H2/FC are examined. (author)

  15. Combined exposures to workplace psychosocial stressors: relationships with mental health in a sample of NZ cleaners and clerical workers.

    Science.gov (United States)

    Lilley, R; Lamontagne, A D; Firth, H

    2011-05-01

    A combined measure of two common psychosocial stressors, called job pressure has previously been shown to be strongly associated with poor mental health in high status workers. This study tests the generalizability of this association to lower status workers. A national random sample of cleaners and clerical workers was obtained from the New Zealand (NZ) electoral roll by occupational title (n = 596). Cross-sectional data on job stressors, demographics, and mental health (GHQ-12) was collected by computer-assisted telephone interviews. Combined exposure to low job control, high job demands, and job insecurity (high job pressure) was associated with markedly elevated odds (13-fold or higher) of poor mental health after adjustment for age, sex, occupation, and education. Combined with previous findings this suggests simultaneous exposure to more than one occupational psychosocial stressor may greatly increase the risk of poor mental health among both lower and higher status workers. This report adds to the larger literature in this area, supporting the need for expanded policy and practice intervention to reduce job stressors across the working population. Copyright © 2011 Wiley-Liss, Inc.

  16. Lung function impairment in women exposed to biomass fuels during cooking compared to cleaner fuels in Uttar Pradesh, India.

    Science.gov (United States)

    Bihari, Vipin; Iqbal, S M; Srivastava, L P; Kesavachandran, C; Siddique, M J A

    2013-11-01

    A national survey has shown that approximately 75-80% use of fire wood and chips, 10% of dung cake rural women in Uttar Pradesh, India. Considering the respiratory health risk of biomass fuel exposure to women, a cross sectional study was conducted to elucidate the relationship between cooking smoke and lung function impairments. The present study showed significant decline in air flow limitation based on reduced PEFR (3.69 | sec(-1)) and FEV1 (1.34 | sec(-1)) in women cooking with biomass fuels compared to PEFR (4.26 | sec(-1)) and FEV1 (1.73 | sec(-1)) in women cooking with cleaner fuels. The noxious gases and particles generated from biomass fuels during cooking reported in earlier studies may be the reason for the slight decline in airway status PEFR (3.69 | sec(-1)) and lung volumes FEV1 (1.34 | sec(-1)). The higher mean bio-fuels exposure index (52.5 hr-yrs) can attribute to reduced lung function in rural women.

  17. Philip Morris changes its name, but not its harmful practices.

    Science.gov (United States)

    Myers, M L

    2002-09-01

    After spending more than $250 million on an advertising campaign to improve its name and reputation, Philip Morris has abruptly shifted course and decided instead to change its corporate name-to The Altria Group, Inc.

  18. A Semantic and Pragmatic Analyses of Igbo Names

    African Journals Online (AJOL)

    Key words: personal names, Igbo, semantic content, pragmatic content, structure. Background to the Study ... Igbo name is a story, a book or a dictionary itself. ..... the meaning (literal meaning) of some of the data structurally presented above.

  19. Name Authority Challenges for Indexing and Abstracting Databases

    OpenAIRE

    Denise Beaubien Bennett; Priscilla Williams

    2006-01-01

    Objective - This analysis explores alternative methods for managing author name changes in Indexing and Abstarcting (I&A) databases. A searcher may retrieve incomplete or inaccurate results when the database provides no or faulty assistance in linking author name variations. Methods - The article includes an analysis of current name authority practices in I&A databases and of selected research into name disambiguation models applied to authorship of articles. Results - Several potential...

  20. Task choice and semantic interference in picture naming

    OpenAIRE

    Piai, V.; Roelofs, A.P.A.; Schriefers, H.J.

    2015-01-01

    Evidence from dual-task performance indicates that speakers prefer not to select simultaneous responses in picture naming and another unrelated task, suggesting a response selection bottleneck in naming. In particular, when participants respond to tones with a manual response and name pictures with superimposed semantically related or unrelated distractor words, semantic interference in naming tends to be constant across stimulus onset asynchronies (SOAs) between the tone stimulus and the pic...

  1. 27 CFR 41.221 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 41.221 Section 41.221 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Change in trade name. Where there is a change in, or an addition or discontinuance of, a trade name used...

  2. 27 CFR 44.102 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 44.102 Section 44.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Warehouse Proprietors Changes in Name § 44.102 Change in trade name. Where there is a change in, or an...

  3. 27 CFR 478.53 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Change in trade name. 478....53 Change in trade name. A licensee continuing to conduct business at the location shown on his license is not required to obtain a new license by reason of a mere change in trade name under which he...

  4. 27 CFR 40.92 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in trade name. 40.92 Section 40.92 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... Changes in Name § 40.92 Change in trade name. Where there is a change in, or an addition or discontinuance...

  5. 27 CFR 555.56 - Change in trade name.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Change in trade name. 555... trade name. A licensee or permittee continuing to conduct business or operations at the location shown... in trade name under which he conducts his business or operations. However, the licensee or permittee...

  6. Referential processing: reciprocity and correlates of naming and imaging.

    Science.gov (United States)

    Paivio, A; Clark, J M; Digdon, N; Bons, T

    1989-03-01

    To shed light on the referential processes that underlie mental translation between representations of objects and words, we studied the reciprocity and determinants of naming and imaging reaction times (RT). Ninety-six subjects pressed a key when they had covertly named 248 pictures or imaged to their names. Mean naming and imagery RTs for each item were correlated with one another, and with properties of names, images, and their interconnections suggested by prior research and dual coding theory. Imagery RTs correlated .56 (df = 246) with manual naming RTs and .58 with voicekey naming RTs from prior studies. A factor analysis of the RTs and of 31 item characteristics revealed 7 dimensions. Imagery and naming RTs loaded on a common referential factor that included variables related to both directions of processing (e.g., missing names and missing images). Naming RTs also loaded on a nonverbal-to-verbal factor that included such variables as number of different names, whereas imagery RTs loaded on a verbal-to-nonverbal factor that included such variables as rated consistency of imagery. The other factors were verbal familiarity, verbal complexity, nonverbal familiarity, and nonverbal complexity. The findings confirm the reciprocity of imaging and naming, and their relation to constructs associated with distinct phases of referential processing.

  7. Sociolinguistic import of name-clipping among Omambala cultural ...

    African Journals Online (AJOL)

    This study examines the perceived but obvious manifestation of name-clipping among Omambala cultural zone of Anambra State. This situation has given rise to distortion of names and most often, to either mis-interpretation or complete loss of the original and full meanings of the names. This situation of misinterpretation is ...

  8. 48 CFR 452.211-70 - Brand Name or Equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Brand Name or Equal. 452... FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 452.211-70 Brand Name or Equal. As prescribed in 411.171, insert the following provision: Brand Name or Equal (NOV 1996...

  9. 48 CFR 852.211-73 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Brand name or equal. 852... Brand name or equal. As prescribed in 811.104-71, insert the following clause: Brand Name or Equal (JAN 2008) (Note: As used in this clause, the term “brand name” includes identification of products by make...

  10. 48 CFR 411.170 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Brand name or equal. 411... ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Selecting and Developing Requirements Documents 411.170 Brand name or equal. (a) A “brand name or equal” purchase description shall include the following type of...

  11. 77 FR 189 - Federal Acquisition Regulation; Brand-Name Specifications

    Science.gov (United States)

    2012-01-03

    ... 2006-0020, Sequence 26] RIN 9000-AK55 Federal Acquisition Regulation; Brand-Name Specifications... Management and Budget memoranda on brand-name specifications. DATES: Effective Date: February 2, 2012. FOR... brand- name specifications. Eight respondents submitted 32 comments in response to the interim rule. The...

  12. 48 CFR 1852.210-70 - Brand name or equal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Brand name or equal. 1852... 1852.210-70 Brand name or equal. As prescribed in 1810.011-70(a), insert the following provision: Brand Name or Equal (DEC 1988) (a) As used in this provision, “brand name” means identification of products...

  13. 27 CFR 19.922 - Change in name of proprietor.

    Science.gov (United States)

    2010-04-01

    ... Changes Affecting Applications and Permits § 19.922 Change in name of proprietor. Where there is to be a change in the individual, firm, or corporate name, the proprietor shall, within 30 days of the change... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name of...

  14. 27 CFR 18.32 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... Original Establishment § 18.32 Change in name. The proprietor shall submit an amended application to cover any change in the individual, firm, or corporate name. (Approved by the Office of Management and... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name. 18.32...

  15. 27 CFR 19.182 - Change in name of proprietor.

    Science.gov (United States)

    2010-04-01

    ... Plants Changes After Original Qualification § 19.182 Change in name of proprietor. Where there is to be a change in the individual, firm, or corporate name, the proprietor shall file application to amend the... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Change in name of...

  16. 27 CFR 40.395 - Change in name.

    Science.gov (United States)

    2010-04-01

    ... § 40.395 Change in name. Where there is a change in the individual, trade, or corporate name of a manufacturer of cigarette papers and tubes, the manufacturer shall, within 30 days of the change, furnish the... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Change in name. 40.395...

  17. Correlates of Gay-Related Name-Calling in Schools

    Science.gov (United States)

    Slaatten, Hilde; Hetland, Jørn; Anderssen, Norman

    2015-01-01

    The aim of this study was to examine whether attitudes about gay-related name-calling, social norms concerning gay-related name-calling among co-students, teacher intervention, and school-related support would predict whether secondary school pupils had called another pupil a gay-related name during the last month. A total of 921 ninth-grade…

  18. Acts of naming: The detective plot in Masondo's fiction | Mhlambi ...

    African Journals Online (AJOL)

    Masondo's acts of naming as a literary device are peculiar and unconventional. Similar names for characters migrate across all his detective narratives, representing varying personalities, psychologies and emotional states. He achieves this by using familiar names, not to create stereotypes and archetypes, but to ...

  19. Task choice and semantic interference in picture naming

    NARCIS (Netherlands)

    Piai, V.; Roelofs, A.P.A.; Schriefers, H.J.

    2015-01-01

    Evidence from dual-task performance indicates that speakers prefer not to select simultaneous responses in picture naming and another unrelated task, suggesting a response selection bottleneck in naming. In particular, when participants respond to tones with a manual response and name pictures with

  20. Design of Brand Names of Medicines Considering Subjects' Preferences.

    Science.gov (United States)

    Pires, Carla Maria Batista Ferreira; Cavaco, Afonso

    2018-03-01

    Only recently, regulations on the names of medicines were developed. Regulations are mainly focused on avoiding the approval of medicine names that may be confusing to others. Furthermore, legal requirements do not include testing for human factors, such as potential users' preferences. To develop a set of new brand names of medicines, to determine subjects' preferred names, and to evaluate if the linguistic features of these names were related to subjects' preferences. Forty-six new names linguistically equivalent to the Portuguese brand names of medicines were developed. A panel of 13 postgraduates on linguistic studies were purposively enrolled. Participants were required to select and categorize the 6 most preferred names. From the 29 selected names: 62.1% ended in consonants, 65.5% contained at least one syllable of the CVC type, and 62.1% presented final stress. Considering these 3 linguistic features, there were statistically significant differences between the preferred and underpreferred names: χ 2 = 4.572, P = .032; χ 2 = 5.599, P = .018; and χ 2 = 4.572; P = .032, respectively. Some linguistic features of the evaluated names were related to subjects' preferences. Tests on subjects' preferences about the names of medicines may provide additional safety features addressed by the present regulations.