WorldWideScience

Sample records for lint cleaner mbslc

  1. Removing seed coat fragments with a lint cleaner grid bar air knife

    Science.gov (United States)

    Seed coat fragments (SCF) in ginned lint cause spinning problems at the textile mill and undesirable defects in finished goods. Work continued on developing an air knife that may help remove SCF from ginned lint. The air knife is mounted on the 1st lint cleaner grid bar of a saw-type lint cleaner,...

  2. Effects of Friction Reduction on Fiber Damage in a Saw-Type Lint Cleaner

    Science.gov (United States)

    U.S. cotton is at a competitive disadvantage from a fiber-quality standpoint, because lint cleaning is required for mechanically harvested cotton, and lint cleaning causes fiber damage. Lint-cleaning research has focused mainly on modifying saw-type lint cleaners, but the work reported here focuses...

  3. Development of an air knife to remove seed coat fragments during lint cleaning

    Science.gov (United States)

    An air knife is a tool commonly used to blow off debris in a manufacturing line. The knife may also be used to break the attachment force between a lint cleaner saw and a seed coat fragment (SCF) with attached fiber, and remove them. Work continued on evaluating an auxiliary air knife mounted on t...

  4. The path of code linting

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Join the path of code linting and discover how it can help you reach higher levels of programming enlightenment. Today we will cover how to embrace code linters to offload cognitive strain on preserving style standards in your code base as well as avoiding error-prone constructs. Additionally, I will show you the journey ahead for integrating several code linters in the programming tools your already use with very little effort.

  5. Euroopa parimaks filmiks nimetati "Valge lint" / Heili Sibrits

    Index Scriptorium Estoniae

    Sibrits, Heili, 1977-

    2009-01-01

    Euroopa Filmiakadeemia auhindadest: parima filmiauhinna sai Saksamaal Bochumis toimunud tseremoonial Michael Haneke "Valge lint", mille eest Haneke sai ka parima režissööri ja stsenaristi auhinna. Parimaks meesnäitlejaks pärjati Tahar Rahim ("Un Prophete"), parimaks naisnäitlejaks Kate Winslet ("The Reader"). Ka teistest võitjatest

  6. 7 CFR 319.8-8 - Lint, linters, and waste.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Lint, linters, and waste. 319.8-8 Section 319.8-8 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION... Britain and Northern Ireland (United Kingdom), Iceland, Liechtenstein, Luxembourg, Netherlands, Norway...

  7. Parallel Algorithm for GPU Processing; for use in High Speed Machine Vision Sensing of Cotton Lint Trash

    Directory of Open Access Journals (Sweden)

    Mathew G. Pelletier

    2008-02-01

    Full Text Available One of the main hurdles standing in the way of optimal cleaning of cotton lint isthe lack of sensing systems that can react fast enough to provide the control system withreal-time information as to the level of trash contamination of the cotton lint. This researchexamines the use of programmable graphic processing units (GPU as an alternative to thePC’s traditional use of the central processing unit (CPU. The use of the GPU, as analternative computation platform, allowed for the machine vision system to gain asignificant improvement in processing time. By improving the processing time, thisresearch seeks to address the lack of availability of rapid trash sensing systems and thusalleviate a situation in which the current systems view the cotton lint either well before, orafter, the cotton is cleaned. This extended lag/lead time that is currently imposed on thecotton trash cleaning control systems, is what is responsible for system operators utilizing avery large dead-band safety buffer in order to ensure that the cotton lint is not undercleaned.Unfortunately, the utilization of a large dead-band buffer results in the majority ofthe cotton lint being over-cleaned which in turn causes lint fiber-damage as well assignificant losses of the valuable lint due to the excessive use of cleaning machinery. Thisresearch estimates that upwards of a 30% reduction in lint loss could be gained through theuse of a tightly coupled trash sensor to the cleaning machinery control systems. Thisresearch seeks to improve processing times through the development of a new algorithm forcotton trash sensing that allows for implementation on a highly parallel architecture.Additionally, by moving the new parallel algorithm onto an alternative computing platform,the graphic processing unit “GPU”, for processing of the cotton trash images, a speed up ofover 6.5 times, over optimized code running on the PC’s central processing

  8. Standard test method for water in lint cotton by oven evaporation combined with volumetric Karl Fischer Titration

    Science.gov (United States)

    The referenced test method for total water content and water regain in lint cotton was developed by USDA scientists in New Orleans at the request of the cotton industry. The method covers the determination of the total water (free and bound) in raw and lint cotton at moisture equilibrium from con...

  9. Swimming pool cleaner poisoning

    Science.gov (United States)

    Swimming pool cleaner poisoning occurs when someone swallows this type of cleaner, touches it, or breathes in ... The harmful substances in swimming pool cleaner are: Bromine ... copper Chlorine Soda ash Sodium bicarbonate Various mild acids

  10. Institutionalising cleaner production in China: the cleaner production promotion law

    NARCIS (Netherlands)

    Mol, A.P.J.; Liu Yi,

    2005-01-01

    During the 1990s, cleaner production was introduced in China, in the beginning especially via development aid projects. From 1992 to 1997 the focus was strongly on the introduction of cleaner production methodology, the training of personnel and the implementation of demonstration projects at the

  11. Euroopa parimaks filmiks sai Michael Haneke "Valge lint" / Andres Laasik

    Index Scriptorium Estoniae

    Laasik, Andres, 1960-2016

    2009-01-01

    Euroopa Filmiakadeemia auhindadest: parima filmiauhinna sai Saksamaal Bochumis toimunud tseremoonial Michael Haneke "Valge lint", mille eest Haneke sai ka parima režissööri ja stsenaristi auhinna. Parimaks meesnäitlejaks pärjati Tahar Rahim ("Un Prophete"), parimaks naisnäitlejaks Kate Winslet ("The Reader"), publikupreemia sai Danny Boyle'i "Rentslimiljonär. Ka teistest võitjatest

  12. Identification of Marker-Trait Associations for Lint Traits in Cotton

    Science.gov (United States)

    Iqbal, Muhammad A.; Rahman, Mehboob-ur-

    2017-01-01

    Harvesting high quality lint, a long-awaited breeding goal—accomplished partly, can be achieved by identifying DNA markers which could be used for diagnosing cotton plants containing the desired traits. In the present studies, a total of 185 cotton genotypes exhibiting diversity for lint traits were selected from a set of 546 genotypes evaluated for fiber traits in 2009. These genotypes were extensively studied for three consecutive years (2011–2013) at three different locations. Significant genetic variations were found for average boll weight, ginning out turn (GOT), micronaire value, staple length, fiber bundle strength, and uniformity index. IR-NIBGE-3701 showed maximum GOT (43.63%). Clustering of genotypes using Ward's method was found more informative than that of the clusters generated by principal component analysis. A total of 382 SSRs were surveyed on 10 Gossypium hirsutum genotypes exhibiting contrasting fiber traits. Out of these, 95 polymorphic SSR primer pairs were then surveyed on 185 genotypes. The gene diversity averaged 0.191 and the polymorphic information content (PIC) averaged 0.175. Unweighted pair group method with arithmetic mean (UPGMA), principal coordinate analysis (PCoA), and STRUCTURE software grouped these genotypes into four major clusters each. Genetic distance within the clusters ranged from 0.0587 to 0.1030. A total of 47 (25.41%) genotypes exhibited shared ancestry. In total 6.8% (r2 ≥ 0.05) and 4.4% (r2 ≥ 0.1) of the marker pairs showed significant linkage disequilibrium (LD). A number of marker-trait associations (in total 75) including 13 for average boll weight, 18 for GOT percentage, eight for micronaire value, 18 for staple length, three for fiber bundle strength, and 15 for uniformity index were calculated. Out of these, MGHES-51 was associated with all the traits. Most of the marker-trait associations were novel while few validated the associations reported in the previous studies. High frequency of favorable

  13. 7 CFR 2902.34 - Carpet and upholstery cleaners.

    Science.gov (United States)

    2010-01-01

    ... procurement applies are: (i) General purpose cleaners. Carpet and upholstery cleaners formulated for use in... PROCUREMENT Designated Items § 2902.34 Carpet and upholstery cleaners. (a) Definition. (1) Cleaning products... upholstery cleaners shall be based on the amount of qualifying biobased carbon in the product as a percent of...

  14. Fatal accidental inhalation of brake cleaner aerosols.

    Science.gov (United States)

    Veit, F; Martz, W; Birngruber, C G; Dettmeyer, R B

    2018-04-23

    Brake cleaner liquid is commonly used for cleaning of engines and motor parts. The commercially available products usually contain mainly volatile organic compounds. As a consequence brake cleaner evaporates fast and almost completely from the cleaned surface. This case report presents a fatal accidental inhalation of brake cleaner liquid aerosols due to the attempted cleaning of a boat engine. A 16year old boy was found lifeless in the engine compartment of a boat engine. In close proximity to the body, the police found cleanings wipes soaked with brake cleaner as well as a pump spray bottle filled with brake cleaner. Essentially the autopsy revealed a cerebral oedema with encephalomalacia, no coagulated blood as well as increased blood and tissue fluid content of the lung. Toxicological analysis revealed brake cleaner fluid in the lung, gastric content and heart blood. Copyright © 2018 Elsevier B.V. All rights reserved.

  15. QFD analysis of RSRM aqueous cleaners

    Science.gov (United States)

    Marrs, Roy D.; Jones, Randy K.

    1995-01-01

    This paper presents a Quality Function Deployment (QFD) analysis of the final down-selected aqueous cleaners to be used on the Redesigned Solid Rocket Motor (RSRM) program. The new cleaner will replace solvent vapor degreasing. The RSRM Ozone Depleting Compound Elimination program is discontinuing the methyl chloroform vapor degreasing process and replacing it with a spray-in-air aqueous cleaning process. Previously, 15 cleaners were down-selected to two candidates by passing screening tests involving toxicity, flammability, cleaning efficiency, contaminant solubility, corrosion potential, cost, and bond strength. The two down-selected cleaners were further evaluated with more intensive testing and evaluated using QFD techniques to assess suitability for cleaning RSRM case and nozzle surfaces in preparation for adhesive bonding.

  16. Evaluation of the cleaner technology programme

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou; Jørgensen, Ulrik

    The report presents an independent evaluation of the Danish development programme for cleaner technology 1986-1989 and of the Action Plan for Cleaner Technology 1990-1992. The evaluation focuses on the results of technology development and implementation projects, on an examination...... of the dissemination of cleaner technology solutions achieved in six industrial branches, and on the overall programme and its effects, in particular environmental impacts, but also results in the form of employment, environmental export, strenghtening of Danish know-how etc....

  17. Design of Agricultural Cleaner Production Technology System

    OpenAIRE

    Hu, Jun-mei; Wang, Xin-jie

    2009-01-01

    Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

  18. Differential cross section measurement for the 6Li(n,t)4He Reaction

    International Nuclear Information System (INIS)

    Zhang Guohui; Tang Guoyou; Chen Jinxiang; Shi Zhaomin

    2002-01-01

    The differential cross sections and integrated cross sections of the 6 Li(n,t) 4 He reaction were measured at 1.85 and 2.67 MeV by using a gridded ionization chamber. Neutrons were produced through the T(p, n) 3 He reaction. The absolute neutron flux was determined through the 238 U(n, f) reaction. Present results are compared with existing data

  19. Mitigation effects of radon decay products by air cleaner

    International Nuclear Information System (INIS)

    Kazuki Iwaoka; Tetsuo Ishikawa; Hidenori Yonehara; Shinji Tokonami

    2013-01-01

    One of the most effective methods for reducing exposure is the use of air cleaners. In this study, a dose mitigation of a commonly-used Japanese air cleaner under conditions in which aerosols are continuously supplied was investigated. Although the values of the EERC during an operation of air cleaner decreased, values of the f p increased with the use of air cleaner. An effective dose was calculated on the basis of our experimental results, resulting in the dose mitigation of about 40 % by the air cleaner. Air cleaners can be regarded as an effective tool for the dose mitigation under with conditions in which aerosols are continuously supplied. (author)

  20. Drivers for Cleaner Production in Malaysian Industry

    DEFF Research Database (Denmark)

    Wangel, Arne

    2003-01-01

    This working paper tries to piece together information on regulatory initiatives promoting cleaner production (CP) in Malaysian industry, as well as points of discussion on environmental performance in the sector. It draws upon initial data collection by the team of the research project ‘A Study...... on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production’, which is coordinated by Institute of Environmental and Resource Management, Universiti Teknologi Malaysia; the objective of this study...... is ‘to formulate, establish and develop a comprehensive "National Cleaner Production Promotion Program" for Malaysia’....

  1. 7 CFR 2902.48 - General purpose household cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false General purpose household cleaners. 2902.48 Section... PROCUREMENT Designated Items § 2902.48 General purpose household cleaners. (a) Definition. Products designed... procurement preference for qualifying biobased general purpose household cleaners. By that date, Federal...

  2. Parasite infestation increases on coral reefs without cleaner fish

    Science.gov (United States)

    Grutter, A. S.; De Brauwer, M.; Bshary, R.; Cheney, K. L.; Cribb, T. H.; Madin, E. M. P.; McClure, E. C.; Meekan, M. G.; Sun, D.; Warner, R. R.; Werminghausen, J.; Sikkel, P. C.

    2018-03-01

    Mutualisms are pivotal in shaping ecological communities. Iconic images of cleaner fish entering the mouths of predatory fish clients to remove ectoparasites epitomize their mutual benefit. Experimental manipulations of cleaner wrasse reveal declines in fish size and growth, and population abundance and diversity of client fishes in the absence of cleaner wrasse. Fishes grow more slowly and are less abundant and diverse on reefs without cleaner wrasse, both for larger species that are regularly cleaned and have high ectoparasite loads ("attractive species"), and for those smaller species that are rarely cleaned and are rarely infested with parasites ("unattractive species"). We therefore considered whether these previously observed declines in individual and population parameters on reefs without cleaners were related to increased ectoparasite infestation using an attractive species ( Hemigymnus melapterus, Labridae) and an unattractive species ( Pomacentrus amboinensis, Pomacentridae). Traps with these fish as a form of bait were deployed to sample blood-sucking gnathiid ectoparasites (Gnathiidae: Isopoda) on reefs from which cleaners ( Labroides dimidiatus, Labridae) have been removed for 13 yr. Cleaner fish could not enter traps to access the clients/hosts, but gnathiids could enter the traps to infest hosts; thus, this method sampled the indirect effect of cleaners on gnathiid infestation of fish. Infestation was higher on reefs without cleaners than on those with them. The effect was only detected during the daytime when cleaners are active and only on the attractive species ( H. melapterus). Thus, cleaner presence indirectly reduced fish exposure to parasites in a species that is highly susceptible to parasites, but not in one that is rarely infested with parasites. This suggests that cleaner presence indirectly reduces exposure of a common fish species to harmful parasites, which may explain some observed benefits in fishes at this location.

  3. Beyond symbiosis: cleaner shrimp clean up in culture.

    Science.gov (United States)

    Militz, Thane A; Hutson, Kate S

    2015-01-01

    Cleaner organisms exhibit a remarkable natural behaviour where they consume ectoparasites attached to "client" organisms. While this behaviour can be utilized as a natural method of parasitic disease control (or biocontrol), it is not known whether cleaner organisms can also limit reinfection from parasite eggs and larvae within the environment. Here we show that cleaner shrimp, Lysmata amboinensis, consume eggs and larvae of a harmful monogenean parasite, Neobenedenia sp., in aquaculture. Shrimp consumed parasite eggs under diurnal (63%) and nocturnal (14%) conditions as well as infectious larvae (oncomiracidia) diurnally (26%). Furthermore, we trialled the inclusion of cleaner shrimp for preventative parasite management of ornamental fish, Pseudanthias squamipinnis, and found shrimp reduced oncomiracidia infection success of host fish by half compared to controls (held without shrimp). Fish held without cleaner shrimp exhibited pigmentation changes as a result of infection, possibly indicative of a stress response. These results provide the first empirical evidence that cleaner organisms reduce parasite loads in the environment through non-symbiotic cleaning activities. Our research findings have relevance to aquaculture and the marine ornamental trade, where cleaner shrimp could be applied for prophylaxis and control of ectoparasite infections.

  4. 7 CFR 2902.49 - Industrial cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Industrial cleaners. 2902.49 Section 2902.49... Items § 2902.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as..., floors, walls, and other production-related work areas. The cleaning products within this item are...

  5. Probing bias reduction to improve comparability of lint cotton water and moisture contents at moisture equilibrium

    Science.gov (United States)

    The Karl Fischer Titration (KFT) reference method is specific for water in lint cotton and was designed for samples conditioned to moisture equilibrium, thus limiting its biases. There is a standard method for moisture content – weight loss – by oven drying (OD), just not for equilibrium moisture c...

  6. RELATION BETWEEN FUNCTION AND FORM IN VACUUM CLEANERS DESIGN

    Directory of Open Access Journals (Sweden)

    RADU Ștefan

    2015-11-01

    Full Text Available The paper analyses how robotic vacuum cleaner works, describing their cleaning capabilities and additional features. The paper illustrates advantages of using robotic vacuum cleaners that have intelligent programming and a vacuum cleaning system, the components of a robotic vacuum cleaner. The paper develops aspects concerning to create 2D scale models for the evaluation of specific features of the new components for a prototype robotic vacuum cleaner.

  7. Reconstructing the image of the cleaner

    NARCIS (Netherlands)

    Jorcho van Vlijmen; Toine van den Hoogen

    2013-01-01

    Purpose: The article shows the relevance of an insider’s perspective on workers in the cleaning industry (cleaners). It explains how the ways in which cleaners create meaning in their work can be explored. These findings help to create added value for FM. Theory: Organisational theory describes a

  8. Inventory on cleaner production education and training

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard; Pöyry, Sirkka; Huisingh, Donald

    Analysis and presentation of the data from an international inventory on cleaner production education and training......Analysis and presentation of the data from an international inventory on cleaner production education and training...

  9. Health disparities between immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Jørgensen, Marie B; Rasmussen, Charlotte D N; Carneiro, Isabella G

    2011-01-01

    hundred and fifty-one cleaners, consisting of 166 Danes (88% women) and 179 immigrants (74% women) (6 with unknown ethnicity), from 9 workplaces in Denmark participated in the study. Health and work ability were obtained by objective (e.g., BMI and blood pressure) and self-reported measures (e.g., work......PURPOSE: It is unknown whether immigrants working in the cleaning industry have a poorer health and work ability than cleaners from the native population. The main aim was to investigate differences in objective and self-reported health measures between immigrant and Danish cleaners. METHODS: Three...... ability, self-rated health, and musculoskeletal symptoms). In order to investigate differences between Danish and immigrant cleaners, logistic regression analyses and General Linear Models were performed. RESULTS: When controlling for age, sex, workplace, job seniority, and smoking, more Danish compared...

  10. Materials Compatibility Testing in RSRM ODC: Free Cleaner Selection

    Science.gov (United States)

    Keen, Jill M.; Sagers, Neil W.; McCool, Alex (Technical Monitor)

    2001-01-01

    Government regulations have mandated production phase-outs of a number of solvents, including 1,1,1-trichloroethane, an ozone-depleting chemical (ODC). This solvent was used extensively in the production of the Reusable Solid Rocket Motors (RSRMs) for the Space Shuttle. Many tests have been performed to identify replacement cleaners. One major area of concern in the selection of a new cleaner has been compatibility. Some specific areas considered included cleaner compatibility with non-metallic surfaces, painted surfaces, support materials such as gloves and wipers as well as corrosive properties of the cleaners on the alloys used on these motors. The intent of this paper is to summarize the test logic, methodology, and results acquired from testing the many cleaner and material combinations.

  11. Assessment of In-Season Cotton Nitrogen Status and Lint Yield Prediction from Unmanned Aerial System Imagery

    Directory of Open Access Journals (Sweden)

    Carlos Ballester

    2017-11-01

    Full Text Available The present work assessed the usefulness of a set of spectral indices obtained from an unmanned aerial system (UAS for tracking spatial and temporal variability of nitrogen (N status as well as for predicting lint yield in a commercial cotton (Gossypium hirsutum L. farm. Organic, inorganic and a combination of both types of fertilizers were used to provide a range of eight N rates from 0 to 340 kg N ha−1. Multi-spectral images (reflectance in the blue, green, red, red edge and near infrared bands were acquired on seven days throughout the season, from 62 to 169 days after sowing (DAS, and data were used to compute structure- and chlorophyll-sensitive vegetation indices (VIs. Above-ground plant biomass was sampled at first flower, first cracked boll and maturity and total plant N concentration (N% and N uptake determined. Lint yield was determined at harvest and the relationships with the VIs explored. Results showed that differences in plant N% and N uptake between treatments increased as the season progressed. Early in the season, when fertilizer applications can still have an effect on lint yield, the simplified canopy chlorophyll content index (SCCCI was the index that best explained the variation in N uptake and plant N% between treatments. Around first cracked boll and maturity, the linear regression obtained for the relationships between the VIs and both plant N% and N uptake was statistically significant, with the highest r2 values obtained at maturity. The normalized difference red edge (NDRE index, and SCCCI were generally the indices that best distinguished the treatments according to the N uptake and total plant N%. Treatments with the highest N rates (from 307 to 340 kg N ha−1 had lower normalized difference vegetation index (NDVI than treatments with 0 and 130 kg N ha−1 at the first measurement day (62 DAS, suggesting that factors other than fertilization N rate affected plant growth at this early stage of the crop. This fact

  12. [Effectiveness and limits of the cleaners steam in hospitals].

    Science.gov (United States)

    Meunier, O; Meistermann, C; Schwebel, A

    2009-05-01

    We assessed bactericidal activity of the cleaners steam used for the bio-cleaning of the hospital surfaces. We performed of samples (Rodac) before and after use of cleaner steam and compared with bactericidal effect of disinfecting detergent used in hospital for surfaces. We studied this effectiveness for different time of steam contact. Finally, we wanted to prove, by air sampling, that aero-bio-contamination was possible generated by using cleaners steam. We show that bactericidal effect of the cleaner steam is superior of some tested disinfecting detergent, for the treatment of one square meter till 2 min. This effectiveness diminishes to be just identical in that some disinfecting detergent when use of the cleaner steam is up to two or four square meters surfaces till 2 min. On the other hand, the cleaner steam is less efficient in terms of bacterial destruction when the time of contact steam-soil is superior in 2 min for six square meter surface. The air bacterial pollution, generated by the use of the cleaner steam, is restricted and not significantly augmented if measured in 44 cm above the soil in the course of cleaning. The cleaner steam is indeed a very good equipment for the cleaning of surfaces but it is necessary to respect a time of minimal contact of 2 min for four square meters surfaces treaties to acquire an antibacterial effect at least so important as that acquired with used disinfecting detergent. The disinfection of surfaces is then user-dependent and the time of requested contact is can be not compatible with hospital obligations.

  13. Cleaner Production in the mining

    International Nuclear Information System (INIS)

    Pinto Martinez, Elias

    2004-01-01

    The control politics of the environmental contamination have substantially changed from the 80, toward new preventive tendencies that make the question. That we make with the residuals? What can we make for not generating residuals? On this position, the topic of clean production, it really indicates environmentally a production cleaner, to generate a more respectful final product with the environment, as a result of a process that incorporates in each one of the phases of the life cycle of products the best environmental practices. The national politics of cleaner production was approved in August of 1997 by the environmental national advice, it was formulated like an answer to the solution of the environmental problem of the productive sectors that looks for fundamentally to prevent the contamination in its origin, instead of treating her once generated, with significant results for the construction of the real possibilities of sustainability and competitiveness. Their implementation requires of the government like of the productive sectors, fundamentally, because the environmental problems have become very complex for its control, only through direct regulation, and because to reach the sustainable development of the productive activities implies to face the new challenges of the national and international competitiveness, considering that the environmental administration is a source of opportunities and not an obstacle. In the practice the application of the concept of cleaner production, so much in the current systems of production like in the products and services, it doesn't mean a substitution in strict sense for other different, but improving them continually, under the expert that the new technologies will be cleaner. Of here that production cleans it profiles as the goal that will be reached with the new investments, as long as the systematic search of the continuous improvement, corresponds to the concept of cleaner production that obeys a dynamic and

  14. The Development Of Cleaner Production Practices Between Environmental

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2003-01-01

    (DANCED), Ministry of Environment and Energy. Small and medium-scale enterprises (SMEs) were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen......, presenting figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention...... towards sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project ‘A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner...

  15. Cottonseed protein, oil, and mineral status in near-isogenic Gossypium hirsutum cotton lines expressing fuzzy/linted and fuzzless/linted seed phenotypes under field conditions

    Directory of Open Access Journals (Sweden)

    Nacer eBellaloui

    2015-03-01

    Full Text Available Cotton is an important crop in the world and is a major source of oil for human consumption and cotton meal for livestock. Cottonseed nutrition (seed composition: protein, oil, and minerals determine the quality of seeds. Therefore, maintaining optimum levels of cottonseed nutrition is critical. Physiological and genetic mechanisms controlling the levels of these constituents in cottonseed are still largely unknown. Our previous research conducted under greenhouse conditions showed that seed and leaf nutrition differed between fuzzless and fuzzy seed isolines. Therefore, the objective of this research was to investigate the seed fuzz phenotype (trait effects on seed protein, oil, N, C, S, and minerals in five sets of near-isogenic mutant cotton lines for seed fuzz in a two-year experiment under field condition to evaluate the stability of the effect of the trait on seed nutrition. The isolines (genotypes in each set differ for the seed fuzz trait (fuzzless/linted seed line, N lines, and fuzzy/linted seed line, F lines. Results showed that seed protein was higher in the fuzzy genotype in all sets, but seed oil was higher in fuzzless genotype in all sets. The concentrations of seed Ca and C were higher in all fuzzless genotypes, but N, S, B, Fe, and Zn were higher in most of the fuzzy genotypes. Generally, minerals were higher in leaves of F lines, suggesting the translocation of minerals from leaves to seeds was limited. The research demonstrated that fiber development could be involved in cottonseed composition. This may be due to the involvement of fiber development in carbon and nitrogen metabolism, and the mobility of nutrients from leaves (source to seed (sink. This information is beneficial to breeders to consider fuzzless cottonseed for potential protein and oil use and select for higher oil or higher protein content, and to physiologists to further understand the mobility of minerals to increase the quality of cottonseed nutrition for

  16. Electronic air cleaners and the indoor environment

    International Nuclear Information System (INIS)

    Krafthefer, B.

    1986-01-01

    The growing awareness over the quality of air in the indoor environment is driving the search for effective control methods for the contaminants of concern. Electronic air cleaners can control such pollutants as dust, pollen, tobacco smoke, radon decay products, and other particulates. This paper presents an examination of the various types of electronic air cleaners and their effects on indoor pollutants. It also examines the mechanism for contaminant removal, the relationship of the efficiency to the characteristics of the contaminant, and what type of contaminants can be controlled with the electronic air cleaner, with particular emphasis placed on the removal of radon decay products. From a study on radon product removal in residences, the electronic air cleaner was found to have an efficiency of up to 70%. Not only was there a reduction in the residential working level, but the fluctuations in the working level were also reduced. With this information, they can better understand how to solve the air treatment problem of the inhabited space. 17 references, 8 figures

  17. Reference method for total water in lint cotton by automated oven drying combined with volumetric Karl Fischer titration

    Science.gov (United States)

    In a preliminary study to measure total water in lint cotton we demonstrated that volumetric Karl Fischer Titration of moisture transported by a carrier gas from an attached small oven is more accurate than standard oven drying in air. The objective of the present study was to assess the measuremen...

  18. Evaluation of electrolytic alkaline cleaners by evaporative-rate analysis

    International Nuclear Information System (INIS)

    Hamilton, C.B.

    1975-01-01

    A method has been developed by which electrolytic alkaline cleaners used in large volumes in steel mills can be evaluated for their ability to clean rolling oil from steel strip without the necessity of large-scale mill trials. The method is evaporative-rate analysis, which can be used to determine the relative amount of residual oil on steel strip after cleaning. The procedure consists in placing a droplet of a solution of a volatile, radioactive, carbon-14 tagged organic compound dissolved in a more volatile solvent, on the surface of the metal, where it forms a ternary solution with any oil on the surface. The amount of oil in this ternary solution affects the rate of evaporation of the tagged compound. The rate of evaporation, monitored by a Geiger-Mueller detector, is a measure of the cleanliness of the surface. A number of commercial alkaline cleaners, both solids and liquids, were evaluated over a range of concentrations. Results indicated that the effectiveness of commercial alkaline cleaners varies greatly, and is a function of the cleaner concentration, cleaner composition, and polarity of cleaning. The presence of antifoaming agents also affects cleaning ability. The results of this study indicate that evaporative-rate analysis is a rapid and effective method for evaluating cleaners

  19. Impacto do beneficiamento sobre o número de neps e quantidade de impurezas da fibra do algodão Ginning impact on the number of neps and amount of cotton fiber contaminants

    Directory of Open Access Journals (Sweden)

    Odilon R. R. F. da Silva

    2010-01-01

    Full Text Available Objetivou-se, neste trabalho, estudar o efeito do beneficiamento sobre o conteúdo de impurezas, pó e o número de neps na pluma, em 12 algodoeiras do Estado de Mato Grosso. O experimento consistiu de uma combinação fatorial de cinco etapas de beneficiamento do algodão em 12 algodoeiras em delineamento inteiramente casualizado com quatro repetições. Amostras de algodão foram coletadas nas seguintes etapas: a no desmanche do fardão; b antes do descaroçamento; c logo após o descaroçamento; d na bica, sem o uso do limpador tipo serrilha; e na bica, após a limpeza da pluma, utilizando-se o limpador tipo serrilha. Em todas as etapas se retiraram quatro amostras padrão de pluma com massa de 350 g a fim de serem analisadas mediante o instrumento AFIS (Advanced Fiber Information System para determinação do conteúdo de impurezas e poeira e o número de neps da fibra. Os resultados indicam que os processos de prelimpeza do algodão em caroço e limpeza da pluma reduzem o conteúdo de impurezas e da poeira do algodão enquanto, juntamente com o descaroçamento, esses processos aumentaram o número de neps da fibra do algodão. A utilização do limpador de pluma tipo serrilha com manta contínua aumenta a eficiência de limpeza da pluma, porém ocasiona incrementos significativos no número de neps.The purpose of this work was to study the ginning effect on the amount of cotton contaminants, dust and neps in cotton fiber, in 12 industries in the Mato Grosso State. The experiment consisted of a factorial combination over five stages of ginning and 12 cotton industries using a randomized design with four replications. Some samples of cotton were collected in the following phases: a in the bale dismantling; b before the ginning; c right after ginning; d into the covered lint slide not using the saw lint cleaner; and e into the covered lint slide, after cleaning process using the saw lint cleaner system. Over all stages four standard samples of

  20. Hospital trash: cleaners speak of their role in disease prevention.

    Science.gov (United States)

    Messing, K

    1998-06-01

    Feminist researchers have contrasted the caring provided by women in hospitals with a more fragmented "curing" approach, which they identify with the predominantly male professions of medicine and surgery. The author spoke with hospital cleaners about their jobs and their health. Several themes emerged: the invisibility of the cleaning function, lack of respect for cleaners, representations of cleaning as undemanding, and assumptions that women's work in cleaning is particularly easy. Cleaners use various strategies to combat these stereotypes but receive little help from administrators or fellow employees. There is a hierarchy in the status of Québec hospital workers with curing (doctors) at the top, followed by caring and healing (nurses, therapists, and attendants), and hygiene (cleaners, sterilizers, and launderers) at the bottom. Authority hierarchies in health care are not related to gender in a simple way, although there is discrimination against women cleaners. The fact that cleaning, especially cleaning performed by women, is invisible to managers, other hospital personnel, and patients has important consequences for cleaners' and for patients' health.

  1. Evaluation of the efficiency of denture cleaners for removing denture adhesives.

    Science.gov (United States)

    Harada-Hada, Kae; Hong, Guang; Abekura, Hitoshi; Murata, Hiroshi

    2016-12-01

    We developed a new scoring index for assessing the removability of denture adhesives and evaluated the removal efficiency of denture cleaners. Although our understanding of the importance of denture care is increasing, little is known about the effectiveness and efficiency of denture cleaners on denture adhesives. Therefore, guidelines for proper cleaning are necessary. We used five denture cleaner solutions on two cream adhesives, one powder adhesive and one cushion adhesive. After immersion in the denture cleaners for a designated time, we evaluated the area of the sample plate still covered by denture adhesive. Cream adhesives were removed more completely after immersion in majority of the denture cleaners than in water. Powder adhesive was removed more quickly than cream adhesives. Cushion adhesive was not removed by immersion in either the denture cleaners or water control. Some denture cleaners could liquefy cream adhesives more than water, but these differences were not observed in case of powder and cushion adhesives. © 2015 John Wiley & Sons A/S and The Gerodontology Association. Published by John Wiley & Sons Ltd.

  2. Occupational exposures and health outcomes among Latina hotel cleaners.

    Science.gov (United States)

    Hsieh, Yu-Chin Jerrie; Apostolopoulos, Yorghos; Hatzudis, Kiki; Sönmez, Sevil

    2014-01-01

    The poor working conditions of Latina hotel cleaners render them particularly vulnerable to elevated occupational hazards that lead to adverse health outcomes. This article presents a comprehensive review of occupational risks (including physical, chemical, biological, and psychosocial risk factors) and health outcomes (including musculoskeletal disorders, respiratory diseases, dermatological diseases and allergies, and psychological disorders) for Latina hotel cleaners, within their unique sociocultural contexts. Preventive interventions for improving Latina hotel cleaners' work and health conditions are recommended.

  3. Cutting cleaner

    International Nuclear Information System (INIS)

    Elsen, R.P.H. van; Smits, M.

    1991-01-01

    This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

  4. Metal cleaner poisoning

    Science.gov (United States)

    ... do so by poison control or a health care provider. If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes. If the person swallowed the metal cleaner, give them water or milk right away, unless a provider tells you not ...

  5. Epidemiology of occupational injury among cleaners in the healthcare sector.

    Science.gov (United States)

    Alamgir, Hasanat; Yu, Shicheng

    2008-09-01

    The cleaning profession has been associated with multiple ergonomic and chemical hazards which elevate the risk for occupational injury. This study investigated the epidemiology of occupational injury among cleaners in healthcare work settings in the Canadian province of British Columbia. Incidents of occupational injury among cleaners, resulting in lost time from work or medical care, over a period of 1 year in two healthcare regions were extracted from a standardized operational database and with person-years obtained from payroll data. Detailed analysis was conducted using Poisson regression modeling. A total of 145 injuries were identified among cleaners, with an annual incidence rate of 32.1 per 100 person-years. After adjustment for age, gender, subsector, facility, experience and employment status, Poisson regression models demonstrated that a significantly higher relative risk (RR) of all injury, musculoskeletal injury and cuts was associated with cleaning work in acute care facilities, compared with long-term care facilities. Female cleaners were at a higher RR of all injuries and contusions than male cleaners. A lower risk of all injury and allergy and irritation incidents among part-time or casual workers was found. Cleaners with >10 years of experience were at significantly lower risk for all injury, contusion and allergy and irritation incidents. Cleaners were found to be at an elevated risk of all injury categories compared with healthcare workers in general.

  6. Metal-Detergent/Cleaner Compatibility

    National Research Council Canada - National Science Library

    Hindin, Barry

    1994-01-01

    ...) such as CFC-1 13 or 1,1,1 Trichioroethane (TCA) in their cleaning and degreasing procedures. During the last few years, AGMC has been evaluating alternative, environmentally acceptable chemicals to replace their ODC cleaners...

  7. Cleaner Technology in Denmark - support measures and regulatory efforts

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik

    2005-01-01

    Danish cleaner technology support policies have been successful in fostering innovations that reduce the invironmental impact of products and production. But the lack of enforcement support for cleaner technology in environmental permits has limited the overall impact....

  8. Effect of time course application of nitrogen fertilizer on the N-fertilizer use efficiency, lint properties and seed cotton yield using 15N isotopic dilution technique

    International Nuclear Information System (INIS)

    Janat, M.; Khalifa, Kh

    2001-12-01

    Field experiment was carried out at Der El-Hajar research station during 1998 growing season to evaluate the effect of time course application of nitrogen fertilizer on N-recovery, seed cotton yield and lint properties using 15 N isotope dilution technique. Aleppo 40 variety was tested, irrigation scheduling was set up at 80% of field capacity. Phosphorus fertilizer was applied as TSP 46% before planting at a rate of 180 kg/ha. N fertilizer was applied as urea (46%) in four different applications follows: one application 180 kg N/ha before planting (T1), two split application 180 (90 + 90) kg N/ha (T2), three equally split applications 180 (60 + 60 + 60) kg N/ha (T3), and four equally split applications 180 (45 + 45 + 45 + 45) kg N/ha (T4). Labeled N-fertilizer (5.09 a.e%) was also applied as urea 46% to the subplots (1.0 m 2 each) of the corresponding treatments. All agricultural practices were carried out as the common practices locally employed. Soil samples were analyzed for CEC, ph, EC, OM, total N, available P, and CaCO 3 as outlined by our laboratory standard procedure. Plant samples were collected at physiological maturity and analyzed for 15 N enrichment to assess N recovery. Lint samples were analyzed for lint properties. the results showed no significant effect of the nitrogen fertilizer time course application on the tested parameters such as dry matter production, seed cotton yield, N uptake and lint properties. on the other hand the T2, T3 and T4 treatments where shown to have a positive significant response toward time course application relative to T1 treatment. (authors)

  9. Inhomogeneous electric field air cleaner

    International Nuclear Information System (INIS)

    Schuster, B.G.

    1976-01-01

    For applications requiring the filtration of air contaminated with enriched uranium, plutonium or other transuranium compounds, it appears desirable to collect the material in a fashion more amenable to recovery than is now practical when material is collected on HEPA filters. In some instances, it may also be desirable to use an air cleaner of this type to substantially reduce the loading to which HEPA filters are subjected. A theoretical evaluation of such an air cleaner considers the interaction between an electrically neutral particle, dielectric or conducting, with an inhomogeneous electric field. An expression is derived for the force exerted on a particle in an electrode configuration of two concentric cylinders. Equations of motion are obtained for a particle suspended in a laminar flow of air passing through this geometry. An electrical quadrupole geometry is also examined and shown to be inferior to the cylindrical one. The results of two separate configurations of the single cell prototypes of the proposed air cleaner are described. These tests were designed to evaluate collection efficiencies using mono-disperse polystyrene latex and polydisperse NaCl aerosols. The advantages and problems of such systems in terms of a large scale air cleaning facility will be discussed

  10. Comparison of cotton square and boll damage and resulting lint and seed loss caused by verde plant bug, Creontiades signatus

    Science.gov (United States)

    Retention of bolls and squares (referred to as fruit retention), boll damage, and resulting cotton lint and seed weight loss were assessed when two (2010) and three (2011) age classes of sympodial fruiting branches with different ages of squares and bolls where exposed to verde plant bug, Creontiade...

  11. Cleaner technology diffusion: case studies, modeling and policy. Editorial

    NARCIS (Netherlands)

    Montalvo Corral, C.; Kemp, R.

    2008-01-01

    The development and application of cleaner technologies (environmental technologies) offer multiple benefits for the adopter: reduced emissions, less waste and cost savings from reduced resource use and savings on waste costs. The question here is: if cleaner technologies offer such great benefits

  12. Self-Compensation of Astigmatism in Mode-Cleaners for Advanced Interferometers

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, P; Zhao Chunnong; Ju Li; Blair, David G [School of Physics, University of Western Australia, Crawley, WA6009 (Australia)

    2006-03-02

    Using a conventional mode-cleaner with the output beam taken through a diagonal mirror it is impossible to achieve a non-astigmatic output. The geometrical astigmatism of triangular mode-cleaners for gravitational wave detectors can be self-compensated by thermally induced astigmatism in the mirrors substrates. We present results from finite element modelling of the temperature distribution of the suspended mode-cleaner mirrors and the associated beam profiles. We use these results to demonstrate and present a self-compensated mode-cleaner design. We show that the total astigmatism of the output beam can be reduced to 5x10{sup -3} for {+-}10% variation of input power about a nominal value when using the end mirror of the cavity as output coupler.

  13. Planning of the evaluation of cleaner production experiences in the CEPITA companies

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1998-01-01

    The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95......The report describes the theoretical and methodological background for the evaluation in 1998 of the cleaner production implementation in a nu,mber of Tanzanian companies taking part in a DANIDA financed cleaner production develeopment project in 1994-95...

  14. Development of self-running underwater cleaner for nuclear facilities

    International Nuclear Information System (INIS)

    Ito, Haruo; Mizutani, Takeshi; Miki, Masamichi

    1979-01-01

    A self-running underwater cleaner for removing sediment accumulated on the bottoms of water tanks in nuclear power stations by remote operation was developed. This cleaner is used in the state maintaining the shielding effect of water against radiation as water is filled in equipment pits, and by the remote operation using cables, it runs freely in water and sucks bottom sediment. The sediment is transported through a drain hose to a treating facility in a power station, and treated in a lump. The cleaner is composed of the carriage with electric steering wheels and driving wheels and a high head submerged pump. Front and rear suction mouths are provided, and suck sediment with high speed water flow while scraping with rubber boards. The cleaner can be used in the water depth of 7 m, and as the results of practical test, it was confirmed that the decontaminating effect and maneuverability were very good so that the sediment at the corner was scarcely left behind, and the effects of labor saving and the reduction of exposure of employees were large. The fundamental experiments were carried out on the running mechanism, the coefficient of friction in water, and the construction of suction mouth. The trial manufacture of the under water cleaner, the water tank experiment and the test in the Mamaoka No. 1 plant are reported. (Kako, I.)

  15. Development of a Modified Vacuum Cleaner for Lunar Surface Systems

    Science.gov (United States)

    Toon, Katherine P.; Lee, Steve A.; Edgerly, Rachel D.

    2010-01-01

    The National Aeronautics and Space Administration (NASA) mission to expand space exploration will return humans to the Moon with the goal of maintaining a long-term presence. One challenge that NASA will face returning to the Moon is managing the lunar regolith found on the Moon's surface, which will collect on extravehicular activity (EVA) suits and other equipment. Based on the Apollo experience, the issues astronauts encountered with lunar regolith included eye/lung irritation, and various hardware failures (seals, screw threads, electrical connectors and fabric contamination), which were all related to inadequate lunar regolith mitigation. A vacuum cleaner capable of detaching, transferring, and efficiently capturing lunar regolith has been proposed as a method to mitigate the lunar regolith problem in the habitable environment on lunar surface. In order to develop this vacuum, a modified "off-the-shelf' vacuum cleaner will be used to determine detachment efficiency, vacuum requirements, and optimal cleaning techniques to ensure efficient dust removal in habitable lunar surfaces, EVA spacesuits, and air exchange volume. During the initial development of the Lunar Surface System vacuum cleaner, systematic testing was performed with varying flow rates on multiple surfaces (fabrics and metallics), atmospheric (14.7 psia) and reduced pressures (10.2 and 8.3 psia), different vacuum tool attachments, and several vacuum cleaning techniques in order to determine the performance requirements for the vacuum cleaner. The data recorded during testing was evaluated by calculating particulate removal, relative to the retained simulant on the tested surface. In addition, optical microscopy was used to determine particle size distribution retained on the surface. The scope of this paper is to explain the initial phase of vacuum cleaner development, including historical Apollo mission data, current state-of-the-art vacuum cleaner technology, and vacuum cleaner testing that has

  16. Cleaner shrimp use a rocking dance to advertise cleaning service to clients.

    Science.gov (United States)

    Becker, Justine H A; Curtis, Lynda M; Grutter, Alexandra S

    2005-04-26

    Signals transmit information to receivers about sender attributes, increase the fitness of both parties, and are selected for in cooperative interactions between species to reduce conflict [1, 2]. Marine cleaning interactions are known for stereotyped behaviors [3-6] that likely serve as signals. For example, "dancing" and "tactile dancing" in cleaner fish may serve to advertise cleaning services to client fish [7] and manipulate client behavior [8], respectively. Cleaner shrimp clean fish [9], yet are cryptic in comparison to cleaner fish. Signals, therefore, are likely essential for cleaner shrimp to attract clients. Here, we show that the yellow-beaked cleaner shrimp [10] Urocaridella sp. c [11] uses a stereotypical side-to-side movement, or "rocking dance," while approaching potential client fish in the water column. This dance was followed by a cleaning interaction with the client 100% of the time. Hungry cleaner shrimp, which are more willing to clean than satiated ones [12], spent more time rocking and in closer proximity to clients Cephalopholis cyanostigma than satiated ones, and when given a choice, clients preferred hungry, rocking shrimp. The rocking dance therefore influenced client behavior and, thus, appears to function as a signal to advertise the presence of cleaner shrimp to potential clients.

  17. 16 CFR 501.3 - Replacement bags for vacuum cleaners.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Replacement bags for vacuum cleaners. 501.3... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.3 Replacement bags for vacuum cleaners. Replacement bags for..., provided: (a) The quantity of contents is expressed in terms of numerical count of the bags; (b) A...

  18. Reputation management promotes strategic adjustment of service quality in cleaner wrasse.

    Science.gov (United States)

    Binning, Sandra A; Rey, Olivia; Wismer, Sharon; Triki, Zegni; Glauser, Gaétan; Soares, Marta C; Bshary, Redouan

    2017-08-21

    Adjusting one's behaviour in response to eavesdropping bystanders is considered a sophisticated social strategy, yet the underlying mechanisms are not well studied. Cleaner wrasse, Labroides dimidiatus, cooperate by eating ectoparasites off "client" fishes, or cheat (i.e. bite) and eat client mucus. Image scoring by bystander clients generally causes cleaners from socially-complex (i.e. high cleaner and client abundance; high client species richness) habitats to increase levels of cooperation. However, some individuals may periodically provide tactile stimulation to small resident clients, which attract bystanders close that are bitten, a form of tactical deception. Cortisol injection can reproduce this pattern. Here, we tested whether cleaners from socially-complex versus simple habitats respond differently to cortisol injections in terms of their cleaning interactions with clients. We found that only cleaners from the socially-complex habitat respond to cortisol injection with strategies functioning as tactical deception: i.e. increased tactile stimulation to small clients and increased cheating of large clients relative to small ones. At the socially-simple site, where reputation management is less important, cortisol-treated fish increased their overall levels of cheating, especially of small clients. Thus, strategic adjustments to cooperative behaviour and tactical deception are likely context-dependent, forming part of general reputation management abilities in cleaner wrasse.

  19. COREXIT 9580 shoreline cleaner: Development, application, and status

    International Nuclear Information System (INIS)

    Canevari, G.P.; Fiocco, R.J.; Lessard, R.R.; Fingas, M.

    1995-01-01

    This paper will describe research on chemical beach cleaners for treatment of oiled shorelines that was initiated in support of the cleaning activities in Prince William Sound (PWS) following the Valdez oil spill in March 1989. The concept for using beach cleaners for shoreline cleanup is to apply a pre-soak to the weathered crude oil on shore and then flush with sea water to wash the oil into a boomed area for subsequent recovery. Criteria imposed on the use of chemical beach cleaners for the cleanup of the Valdez spill were: (1) effective rock cleaning agents should have very little or no toxicity to marine and terrestrial life, (2) there should be no dispersion of the oil washed from the shoreline into the water column; oil was to be recovered by techniques such as skimming or sorbents, and (3) the agents should be on the EPA National Contingency Plan (NCP) list. A laboratory-scale rock washing test was developed to measure cleaner effectiveness and dispersion. A large number of commercially available formulated products were evaluated, as well as development formulations. The commercial products included all of the available NCP-listed products which could function as cleaners. None of the commercial products completely satisfied all the requirements established by the agencies for beach cleaning. However, a new formula, called COREXIT 9580, consisting of two surfactants and a solvent was developed. It exhibited low fish toxicity, low dispersancy and effective rock cleaning capability. The paper reviews the laboratory and field testing to explore the potential use of the COREXIT 9580 to save and restore oiled vegetation

  20. Cleaner products : new tools, players and relationships

    DEFF Research Database (Denmark)

    Remmen, Arne

    focus in the Product Oriented Environmental Initiative. The purpose of this evaluation has been to assess experience from the initiatives to date against the intentions of the action plan, and to provide constructive input to help flesh out a future product-oriented initiative, including the activities...... linked to the new programme for cleaner products. The evaluation has focused on three selected sectors and on inter-sector product-oriented projects carried out under the Action Plan for Cleaner Technology 1993-97. The investigation has been carried out at the request of the Council for Recycling...

  1. Opportunities application of cleaner production practices in paint industry

    International Nuclear Information System (INIS)

    Mohammed, Y. S. Y.

    2010-08-01

    There are releases of volatile organic compounds VOC from paint manufacturing process steps and from cleaning operations in El Mohandas Paint Factory. These emission can cause health, safety and productivity problems in the work area. Hence cleaner production application is necessary in this case. Some of the manufacturing processes and equipment used to accomplish these manufacturing are analyzed and generate cleaner production opportunities, implement some of cleaner production solutions of VOC emission control by some of the methods used by paint facilities in reducing emissions. It was found that there is no control available for emissions factors in paints manufacturing process, so that VOC emission based on raw material consumption rather than calculation emission from processes or equipment by alternative method. (Author)

  2. Application of new pre-isolation techniques to mode cleaner design

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, Pablo [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Woolley, Andrew [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Zhao Chunnong [Computer and Information Science, Edith Cowan University, Mount Lawley, WA 6050 (Australia); Blair, David G [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)

    2004-03-07

    Two very low frequency pre-isolation stages can greatly reduce the residual motion of suspended optical components. In a mode cleaner this can reduce the control forces required on the mirrors, simplifying lock acquisition and reducing noise injection through control forces. This paper describes a 12 m triangular suspended mode cleaner under construction for the AIGO high optical power interferometer. A novel and very compact multistage isolator supports the cavity mirrors. It combines an inverse pendulum in series with a low-mass Roberts linkage, both with pendulum frequencies below 0.1 Hz. The suspension chain is connected to the Roberts linkage via a Euler spring stage and a cantilever spring assembly for vertical isolation. We present an analysis of the mode cleaner, emphasizing the advantage of the improved mode-cleaner suspension and its power-handling capability. The effect of seismic noise on the residual velocity of the mirrors and the predicted frequency stability of the optical cavity are presented.

  3. Application of new pre-isolation techniques to mode cleaner design

    International Nuclear Information System (INIS)

    Barriga, Pablo; Woolley, Andrew; Zhao Chunnong; Blair, David G

    2004-01-01

    Two very low frequency pre-isolation stages can greatly reduce the residual motion of suspended optical components. In a mode cleaner this can reduce the control forces required on the mirrors, simplifying lock acquisition and reducing noise injection through control forces. This paper describes a 12 m triangular suspended mode cleaner under construction for the AIGO high optical power interferometer. A novel and very compact multistage isolator supports the cavity mirrors. It combines an inverse pendulum in series with a low-mass Roberts linkage, both with pendulum frequencies below 0.1 Hz. The suspension chain is connected to the Roberts linkage via a Euler spring stage and a cantilever spring assembly for vertical isolation. We present an analysis of the mode cleaner, emphasizing the advantage of the improved mode-cleaner suspension and its power-handling capability. The effect of seismic noise on the residual velocity of the mirrors and the predicted frequency stability of the optical cavity are presented

  4. An overview of cleaner fish use in Ireland.

    Science.gov (United States)

    Bolton-Warberg, M

    2017-11-21

    Sea lice infestations represent one of the most significant challenges facing the salmon farming industry, giving rise to lost production, additional costs of treatment and potential negative interactions with wild stocks. At present, cleaner fish, which actively remove lice from salmon, are an effective, biological, long-term option which has been adopted by many countries. In Ireland, several key studies were conducted in the 1990s on the use of wild-caught wrasse (corkwing, goldsinny and rock cook) as cleaner fish in experimental and commercial scale trials. More recently, the National University of Ireland Galway (NUIG), at their marine research facility in Carna (CRS), has undertaken applied research on ballan wrasse and lumpsucker. Currently, CRS is providing lumpsucker juveniles and research and development for the Irish salmon industry with support from BIM (Ireland's Seafood Development Agency) and Marine Harvest Ireland. There is a large amount of research currently being carried out in this area in all countries that are utilizing cleaner fish technology. The current focus in Ireland is the development of a native lumpsucker broodstock to facilitate its sustainable production. The aim of this article was to provide an overview of the research, challenges and use of cleaner fish in Ireland. © 2017 The Authors Journal of Fish Diseases Published by John Wiley & Sons Ltd.

  5. Nuclear criticality safety calculations for a K-25 site vacuum cleaner

    International Nuclear Information System (INIS)

    Shor, J.T.; Haire, M.J.

    1997-02-01

    A modified Nilfisk model GSJ dry vacuum cleaner is used throughout the K-25 Site to collect dry forms of highly enriched uranium (HEU). When vacuuming, solids are collected in a cyclone-type separator vacuum cleaner body. Calculations were done with the SCALE (KENO V.a) computer code to establish conditions at which a nuclear criticality event might occur if the vacuum cleaner was filled with fissile solution. Conditions evaluated included full (12-in. water) reflection and nominal (1-in. water) reflection, and full (100%) and 20% 235 U enrichment. Validation analyses of SCALE/KENO and the SCALE 27-group cross sections for nuclear criticality safety applications indicate that a calculated k eff + 2σ eff + 2σ ≥ 0.9605 is considered unsafe and may be critical. Critical conditions were calculated to be 70 g U/L for 100% 235 U and full 12-in. water reflection. This corresponds to a minimum critical mass of approximately 1,400 g 235 U for the approximate 20.0-L volume of the vacuum cleaner. The actual volume of the vacuum cleaner is smaller than the modeled volume because some internal materials of construction were assumed to be fissile solution. The model was an overestimate, for conservatism, of fissile solution occupancy. At nominal reflection conditions, the critical concentration in a vacuum cleaner full of UO 2 F 2 solution was calculated to be 100 g 235 U/L, or 2,000 g mass of 100% 235 U. At 20% 235 U for the 20.0-L volume of the vacuum cleaner. At 15% 235 U enrichment and full reflection, critical conditions were not reached at any possible concentration of uranium as a uranyl fluoride solution. At 17.5% 235 U enrichment, criticality was reached at approximately 1,300 g U/L which is beyond saturation at 25 C

  6. Psychosocial work factors and shoulder pain in hotel room cleaners.

    Science.gov (United States)

    Burgel, Barbara J; White, Mary C; Gillen, Marion; Krause, Niklas

    2010-07-01

    Hotel room cleaners have physically demanding jobs that place them at high risk for shoulder pain. Psychosocial work factors may also play a role in shoulder pain, but their independent role has not been studied in this group. Seventy-four percent (941 of 1,276) of hotel room cleaners from five Las Vegas hotels completed a 29-page survey assessing health status, working conditions, and psychosocial work factors. For this study, 493 of the 941 (52%) with complete data for 21 variables were included in multivariate logistic regression analyses. Fifty-six percent reported shoulder pain in the prior four weeks. Room cleaners with effort-reward imbalance (ERI) were three times as likely to report shoulder pain (OR 2.99, 95% CI 1.95-4.59, P = 0.000) even after adjustment for physical workload and other factors. After adjustment for physical workload, job strain and iso-strain were not significantly associated with shoulder pain. ERI is independently associated with shoulder pain in hotel room cleaners even after adjustment for physical workload and other risk factors. 2010 Wiley-Liss, Inc.

  7. TESTING ANTIMICROBIAL CLEANER EFFICACY ON GYPSUM WALLBOARD CONTAMINATED WITH STACHYBOTRYS CHARTARUM

    Science.gov (United States)

    Reducing occupant exposure to indoor mold growth is the goal of this research, through the efficacy testing of antimicrobial cleaners. Often mold contaminated building materials are not properly removed, but instead surface cleaners are applied in an attempt to alleviate the prob...

  8. ENERGY STAR Certified Room Air Cleaners

    Data.gov (United States)

    U.S. Environmental Protection Agency — Certified models meet all ENERGY STAR requirements as listed in the Version 1.2 ENERGY STAR Program Requirements for Room Air Cleaners that are effective as of July...

  9. Participation of Danish and immigrant cleaners in a 1-year worksite intervention preventingphysical deterioration

    DEFF Research Database (Denmark)

    Rasmussen, Charlotte D N; Jørgensen, Marie B; Carneiro, Isabella G

    2012-01-01

    differences in participation among immigrant and Danish cleaners throughout a 1-year randomised controlled study tailored to cleaners and carried out in predominantly female workplaces. No significant differences in ethnicity were found in consent and participation throughout the 1-year intervention. Dropout...... was equally distributed among Danish and immigrant cleaners. This study indicates that a worksite health promotion intervention among a female-dominated, high-risk occupation such as cleaning can be equally appealing for Danes and immigrants. Statement of Relevance: This study provides insight about...... participation of Danish and immigrant cleaners in a worksite health promotion intervention in a predominantly female occupation. For attaining high participation and low dropout in future worksite health promotion interventions among cleaners, the intervention ought to not only target the ethnic background...

  10. Evaluation of several air cleaners for reducing indoor radon progeny

    International Nuclear Information System (INIS)

    Hopke, P.K.; Jensen, B.; Montassier, N.

    1994-01-01

    Over the past several years, studies have been made of the effectiveness of several kinds of air cleaners in removing radon decay products from indoor air using a recently developed automated, semi-continuous measurement system that can determine the activity-weighted size distributions in occupied homes. Measurements of activity-weighted size distributions and radon concentrations were made every 90 min in a home with a high air exchange rate. A week-long series of measurements was made for the home with no cleaner operating and a similar set of measurements were made for each of the air cleaners. Two different types of air cleaners were tested in this study; filtration units (two different designs from two different manufacturers) and two ion generator/fan systems (identical design NO-RAD systems, but from two different manufacturers). It was found that the filtration units resulted in a median reduction in exposure of 15% and 36% for the two units and corresponding dose reductions of 32% and 53%. The two NO-RAD systems produced 37% and 10% reductions in the median exposure, but the reductions in the median dose were 49% and 46%. (author)

  11. Environmental Technology Verification: Supplement to Test/QA Plan for Biological and Aerosol Testing of General Ventilation Air Cleaners; Bioaerosol Inactivation Efficiency by HVAC In-Duct Ultraviolet Light Air Cleaners

    Science.gov (United States)

    The Air Pollution Control Technology Verification Center has selected general ventilation air cleaners as a technology area. The Generic Verification Protocol for Biological and Aerosol Testing of General Ventilation Air Cleaners is on the Environmental Technology Verification we...

  12. Does aerobic exercise improve or impair cardiorespiratory fitness and health among cleaners?

    DEFF Research Database (Denmark)

    Korshøj Larsen, Mette; Lidegaard, Mark; Skotte, Jørgen H

    2015-01-01

    OBJECTIVE: It is unknown if aerobic exercise overloads or improves the cardiovascular system among workers with high occupational physical activity. This was investigated in a worksite randomized controlled trial (RCT) of aerobic exercise among cleaners. METHODS: We randomized 116 cleaners betwee...

  13. 76 FR 71342 - Proposed CERCLA Administrative Cost Recovery Settlement; River Forest Dry Cleaners Site, River...

    Science.gov (United States)

    2011-11-17

    ... Settlement; River Forest Dry Cleaners Site, River Forest, Cook County, IL AGENCY: Environmental Protection... response costs concerning the River Forest Dry Cleaners site in River Forest, Cook County, Illinois with... code: C-14J, Chicago, Illinois 60604. Comments should reference the River Forest Dry Cleaners Site...

  14. A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production. Progress Report 1

    DEFF Research Database (Denmark)

    Wangel, Arne

    This Progress Report presents the initial findings of the research project 'A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production. Progress Report' funded...

  15. Short-term respiratory effects of cleaning exposures in female domestic cleaners.

    Science.gov (United States)

    Medina-Ramón, M; Zock, J P; Kogevinas, M; Sunyer, J; Basagaña, X; Schwartz, J; Burge, P S; Moore, V; Antó, J M

    2006-06-01

    Symptoms of obstructive lung disease in domestic cleaners have been related to the use of bleach and other irritant cleaning products. The short-term effects of cleaning exposures on respiratory symptoms and peak expiratory flow (PEF) were investigated in domestic cleaners with respiratory disorders. In a panel study, 43 female domestic cleaners with a recent history of asthma and/or chronic bronchitis completed a 2-week diary, collecting information on respiratory symptoms, PEF and cleaning exposures. Mixed regression models were used to assess daily changes in symptoms and PEF associated with specific cleaning exposures. The probability of having work-related asthma was individually assessed by a computerised diagnostic system and an occupational asthma expert. Lower respiratory tract symptoms were more common on working days and were predominantly associated with exposure to diluted bleach, degreasing sprays/atomisers and air fresheners. Associations with upper respiratory tract symptoms and PEF were less apparent. Eleven (30%) subjects scored positively for work-related asthma. It is concluded that exposure to certain irritant cleaning products aggravates lower respiratory tract symptoms in female domestic cleaners with asthma or chronic bronchitis.

  16. The Life, Work and Recreational Physical Activity of Female Cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena

    The main aim of this article-based PhD thesis was to explore the recreational physical activity participation of female cleaners – an occupational group mainly consisting of minority ethnic women from non-western countries. As the PhD project was integrated in and financially supported...... by the Copenhagen Centre for Team Sport and Health, a part of the PhD project was to organize and evaluate a workplace physical activity programme that used team games as the main form of exercise. Via participant observation and semi-structured interviews with 42 cleaners and their supervisors I gained insights...... and employed different theories, they drew a coherent picture: the interviewees’ everyday lives as migrant cleaners in Denmark had a decisive influence on their opportunities to engage in recreational physical activity: most women struggled with the demands of a physically exhausting job and an extensive...

  17. A study on the sound quality evaluation model of mechanical air-cleaners

    DEFF Research Database (Denmark)

    Ih, Jeong-Guon; Jang, Su-Won; Jeong, Cheol-Ho

    2009-01-01

    In operating the air-cleaner for a long time, people in a quiet enclosed space expect low sound at low operational levels for a routine cleaning of air. However, in the condition of high operational levels of the cleaner, a powerful yet nonannoying sound is desired, which is connected to a feeling...... of an immediate cleaning of pollutants. In this context, it is important to evaluate and design the air-cleaner noise to satisfy such contradictory expectations from the customers. In this study, a model for evaluating the sound quality of air-cleaners of mechanical type was developed based on objective...... and subjective analyses. Sound signals from various aircleaners were recorded and they were edited by increasing or decreasing the loudness at three wide specific-loudness bands: 20-400 Hz (0-3.8 barks), 400-1250 Hz (3.8-10 barks), and 1.25- 12.5 kHz bands (10-22.8 barks). Subjective tests using the edited...

  18. Cleaner production - a tool for sustainable environmental development

    International Nuclear Information System (INIS)

    Ahmad, I.; Batool, S.

    2005-01-01

    Industrial Development and Production with no regard for environmental impacts creates water and air pollution, soil degradation, and large-scale global impacts such as acid rain, global warming and ozone depletion. To create more sustainable methods of industrial production, there needs to be a shift in attitudes away from control towards pollution prevention and management. Cleaner Production (CP) refers to a management process that seeks out and eliminates the causes of pollution, waste generation and resource consumption at their source through input reductions or substitutions, pollution prevention, internal recycling and more efficient production technology and processes for sustainable environmental development. The objective of cleaner production is to avoid generating pollution in the first place, which frequently cuts costs, reduces risks associated with liability, and identifies new market opportunities. Introducing cleaner production has become a goal to improve the competitiveness through increased eco-efficiency. CP is a business strategy for enhancing productivity and environmental performance for overall socio-economic development. The environmental and economic benefits can only be achieved by implementing cleaner production tools. The CP assessment methodology is used to systematically identify and evaluate the waste minimization opportunities and facilitate their implementation in industries. It refers to how goods and services are produced with the minimum environmental impact under present technological and economic limits. CP shares characteristics with many environmental management tools such as Environmental Assessment or Design for Environment by including them among the technological options for reducing material and energy intensiveness in production, as well as facilitating ruse trough remanufacturing and recycling. It is thus an extension of the total quality management process. The CP program has been successfully implemented in

  19. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REMOVAL

    Science.gov (United States)

    A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...

  20. Measurement of concentration and size distribution of radon decay products in homes using air cleaners

    International Nuclear Information System (INIS)

    Montassier, N.; Hopke, P.K.; Shi, Y.; McCallum, B.

    1992-01-01

    By removing particles, air cleaners can also eliminate radon decay products. However, by removing the particles, the open-quotes unattachedclose quotes fraction of the radon progeny is increased leading to a higher dose per unit exposure. Thus, both the concentration and size distributions of the radon decay products are needed to evaluate air cleaners. Three types of room air cleaners, NO-RAD Radon Removal System, Electronic Air Cleaner and PUREFLOW Air Treatment System were tested in a single family home in Arnprior, Ontario (Canada). Semi-continuous measurements of radon gas concentration and radon decay product activity weighted size distribution were performed in the kitchen/dining room under real living conditions. The effects of air cleaners on both the concentration and size distribution of the radon decay products were measured, and their impact on the dose of radiation given to the lung tissue were examined

  1. Water quality of surface runoff and lint yield in cotton under furrow irrigation in Northeast Arkansas.

    Science.gov (United States)

    Adviento-Borbe, M Arlene A; Barnes, Brittany D; Iseyemi, Oluwayinka; Mann, Amanda M; Reba, Michele L; Robertson, William J; Massey, Joseph H; Teague, Tina G

    2018-02-01

    Use of furrow irrigation in row crop production is a common practice through much of the Midsouth US and yet, nutrients can be transported off-site through surface runoff. A field study with cotton (Gossypium hirsutum, L.) was conducted to understand the impact of furrow tillage practices and nitrogen (N) fertilizer placement on characteristics of runoff water quality during the growing season. The experiment was designed as a randomized complete block design with conventional (CT) and conservation furrow tillage (FT) in combination with either urea (URN) broadcast or 32% urea ammonium nitrate (UAN) injected, each applied at 101kgNha -1 . Concentrations of ammonium (NH 4 -N), nitrate (NO 3 -N), nitrite (NO 2 -N), and dissolved phosphorus (P) in irrigation runoff water and lint yields were measured in all treatments. The intensity and chemical form of nutrient losses were primarily controlled by water runoff volume and agronomic practice. Across tillage and fertilizer N treatments, median N concentrations in the runoff were water. Water pH, specific electrical conductivity, alkalinity and hardness were within levels that common to local irrigation water and less likely to impair pollution in waterways. Lint yields averaged 1111kgha -1 and were higher (P-value=0.03) in FT compared to CT treatments. Runoff volumes across irrigation events were greater (P-value=0.02) in CT than FT treatments, which increased NO 3 -N mass loads in CT treatments (394gNO 3 -Nha -1 season -1 ). Nitrate-N concentrations in CT treatments were still low and pose little threat to N contaminations in waterways. The findings support the adoption of conservation practices for furrow tillage and N fertilizer placement that can reduce nutrient runoff losses in furrow irrigation systems. Published by Elsevier B.V.

  2. Employee participation and cleaner technology: learning processes in environmental teams

    DEFF Research Database (Denmark)

    Remmen, Arne; Lorentzen, Børge

    2000-01-01

    The approach to pollution prevention in Danish industries in the late-1980s and in the beginning of the 1990s met criticism, because the cleaner technology projects focused too narrowly on technical solutions implemented by experts. The objective of the project “Employee Participation in the Impl...... to improve the firms' environmental activities (e.g. setting up environmental policies, targets and action plans, implementing new procedures and technologies).......The approach to pollution prevention in Danish industries in the late-1980s and in the beginning of the 1990s met criticism, because the cleaner technology projects focused too narrowly on technical solutions implemented by experts. The objective of the project “Employee Participation...... in the Implementation of Cleaner Technology” was to develop a more active role for employees in the environmental activities of companies. Based on practical experiments in five Danish firms within different industrial sectors, the project concluded that employee participation can have a strong effect on changing...

  3. 40 CFR 761.378 - Decontamination, reuse, and disposal of solvents, cleaners, and equipment.

    Science.gov (United States)

    2010-07-01

    ... of solvents, cleaners, and equipment. 761.378 Section 761.378 Protection of Environment ENVIRONMENTAL...-Porous Surfaces § 761.378 Decontamination, reuse, and disposal of solvents, cleaners, and equipment. (a) Decontamination. Decontaminate solvents and non-porous surfaces on equipment in accordance with the standards and...

  4. GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REPLACEMENTS

    Science.gov (United States)

    This guide describes available and emerging cleaner technologies that can be used to reduce emissions and wastes from paint and coatings applications. Environmental concerns and increasing costs of organic chemicals and metals are leading to changes in the formulation of organic ...

  5. Education and Manpower development for Cleaner Production

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    An overview of the needs for education and training for dissemination and implementation of cleaner production. Expericne from training in companies and training of officials from public authorities and from integration into engineering, business and management and social science curricula...

  6. Cleaner Production Practices, Environmental Management and National Policy Development in Malaysia for Electroplating Enterprises

    DEFF Research Database (Denmark)

    Wangel, Arne; Mohamed, Maketab; Agamuthu, P.

    2004-01-01

    -operation for Environment and Development (DANCED), Ministry of Environment and Energy. SMEs were targeted within three sectors: Textile, food and electroplating industries. The paper illustrates the change process from the perspective of electroplating SMEs by reviewing the cleaner production options chosen, presenting...... figures on the results achieved, and discussing the experiences gained. Reviewing the approach and results of the Centre, as well as the status of cleaner production (CP) in Malaysia, the paper outlines the challenges for national policy making, when moving from promotion by project intervention towards...... sustainable practices in the SME sector at large. The paper draws upon data collection conducted by the research project 'A Study on Promotion and Implementation of Cleaner Production Practices in Malaysian Industry - Development of a National Program and Action Plan for Promotion of Cleaner Production'....

  7. Visibility and social recognition as psychosocial work environment factors among cleaners in a multi-ethnic workplace intervention.

    Science.gov (United States)

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2012-12-24

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants' low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called "Make a Difference" designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom's "readiness for cleaning", and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners' psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners' experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered.

  8. Aerobic exercise reduces biomarkers related to cardiovascular risk among cleaners

    DEFF Research Database (Denmark)

    Korshøj, Mette; Ravn, Marie Højbjerg; Holtermann, Andreas

    2016-01-01

    PURPOSE: Blue-collar workers have an increased risk of cardiovascular disease. Accordingly, elevated levels of biomarkers related to risk of cardiovascular disease, such as high-sensitive C-reactive protein, have been observed among blue-collar workers. The objective was to examine whether...... an aerobic exercise worksite intervention changes the level of inflammation biomarkers among cleaners. METHODS: The design was a cluster-randomized controlled trial with 4-month worksite intervention. Before the 116 cleaners aged 18-65 years were randomized, they signed an informed consent form...

  9. A 24-h assessment of physical activity and cardio-respiratory fitness among female hospital cleaners

    DEFF Research Database (Denmark)

    Larsen, Mette Korshøj; Krustrup, Peter; Jespersen, Tobias

    2013-01-01

    measured. The methods were feasible for the objective 24-h sampling of physical activity and cardio-respiratory fitness among cleaners. Measurements showed that the cleaners walked 20,198 ± 4,627 steps per day. During working hours, the average cardio-respiratory load was 25 ± 6% of heart rate reserve (HRR......). The cleaners had a low estimated cardio-respiratory fitness (34 mlO2/kg/min), a high BMI (50%, >25 kg/m(2)) and blood pressure (50%, >120/>80 mmHg). The high amount of steps, the relatively high cardiovascular load at work and low cardio-respiratory fitness illustrate the need for further investigation...... of the relationship between physical activity at work and in leisure, and cardiovascular health in this population. Practitioner Summary: This study evaluated the feasibility of methods for objective 24-h sampling of physical activity among cleaners; the methods used were found to be feasible. The cleaners had a high...

  10. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

    Energy Technology Data Exchange (ETDEWEB)

    Gallego-Schmid, Alejandro, E-mail: alejandro.gallegoschmid@manchester.ac.uk; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-07-15

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

  11. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation

    International Nuclear Information System (INIS)

    Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F.; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-01-01

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%–44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%–109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (< 1% in 2020). However, if the WEEE directive did not exist, then the impacts would be 2%–21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%–20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should

  12. Associations between psychosocial work environment and hypertension among non-Western immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Olesen, Kasper Vinther; Carneiro, Isabella G; Jørgensen, Marie B

    2012-01-01

    INTRODUCTION: Non-Western cleaners have reported better psychosocial work environment but worse health compared with their Danish colleagues. The aim of this study was to compare the association between psychosocial work environment and hypertension among non-Western immigrant cleaners and Danish...

  13. Life cycle environmental impacts of vacuum cleaners and the effects of European regulation.

    Science.gov (United States)

    Gallego-Schmid, Alejandro; Mendoza, Joan Manuel F; Jeswani, Harish Kumar; Azapagic, Adisa

    2016-07-15

    Energy efficiency of vacuum cleaners has been declining over the past decades while at the same time their number in Europe has been increasing. The European Commission has recently adopted an eco-design regulation to improve the environmental performance of vacuum cleaners. In addition to the existing directive on waste electrical and electronic equipment (WEEE), the regulation could potentially have significant effects on the environmental performance of vacuum cleaners. However, the scale of the effects is currently unknown, beyond scant information on greenhouse gas emissions. Thus, this paper considers for the first time life cycle environmental impacts of vacuum cleaners and the effects of the implementation of these regulations at the European level. The effects of electricity decarbonisation, product lifetime and end-of-life disposal options are also considered. The results suggest that the implementation of the eco-design regulation alone will reduce significantly the impacts from vacuum cleaners (37%-44%) by 2020 compared with current situation. If business as usual continued and the regulation was not implemented, the impacts would be 82%-109% higher by 2020 compared to the impacts with the implementation of the regulation. Improvements associated with the implementation of the WEEE directive will be much smaller (impacts would be 2%-21% higher by 2020 relative to the impacts with the implementation of the directive. Further improvements in most impacts (6%-20%) could be achieved by decarbonising the electricity mix. Therefore, energy efficiency measures must be accompanied by appropriate actions to reduce the environmental impacts of electricity generation; otherwise, the benefits of improved energy efficiency could be limited. Moreover, because of expected lower life expectancy of vacuum cleaners and limited availability of some raw materials, the eco-design regulation should be broadened to reduce the impacts from raw materials, production and end

  14. Increased Participation Among Cleaners as a Strategy to Improve Quality and Occupational Health

    Directory of Open Access Journals (Sweden)

    Therese Öhrling

    2014-09-01

    Full Text Available Like many other industries, today the cleaning industry is affected more than ever by competition and pressure toward low prices, which leads to a nonadvantageous situation for cleaners. These days many Swedish municipalities choose to outsource cleaning service in order to save money, although the situation for the cleaners appears to be worsening. The aim of this paper is to evaluate an alternative organizational structure within a Swedish public cleaning division to investigate how good work environment for cleaners can be combined with economical savings for a municipality. Like many other cleaning organizations, both national and international, the present cleaning division has been struggling for a long time with high levels of sick leave and early retirements. After years of unsuccessful attempts to improve the situation by reducing the physical load, cleaning managers made a decision to broaden their strategy by changing the structure of their organization. In this study, both qualitative and quantitative methods have been applied to identify and understand the effects of the organizational change, both on an individual level and on an organizational level. The results show that the organizational change, which leads to increased participation and autonomy for the cleaners, in combination with a high degree of social support, had a positive effect on job satisfaction, work motivation, and pride among the cleaners. Sick leave within the division has decreased, and both the quality and efficiency of the cleaning service have increased. It can be concluded that there are other alternative organizational structures that could be applied within the public sector and prove advantageous, both for the individual cleaners and for the municipality. Further research of similar organizational structures within the private cleaning sector is recommended.

  15. Integrated Technology Air Cleaners (ITAC): Design and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William J.; Cohn, Sebastian; Destaillats, Hugo; Henzel, Victor; Sidheswaran, Meera; Sullivan, Douglas P.

    2013-09-13

    The primary objective of this project was to design, build, and test an air cleaner for residential use with the potential to substantially improve indoor air quality, or maintain indoor air quality unchanged, when outdoor air ventilation rates are reduced to save energy. Two air cleaners were designed and fabricated. The design targets for airflow rate, fan power, and projected cost were met. In short term laboratory studies, both units performed as expected; however, during field studies in homes, the formaldehyde removal performance of the air cleaners was much lower than expected. In subsequent laboratory studies, incomplete decomposition of some indoor air volatile organic compounds, with formaldehyde as a product of partial decomposition of volatile organic compounds, was confirmed as the explanation for the poor formaldehyde removal performance in the field studies. The amount of formaldehyde produced per unit of decomposition of other volatile organic compounds was substantially diminished by increasing the amount of catalyst on the filter and also by decreasing the air velocity. Together, these two measures reduced formaldehyde production, per unit destruction of other volatile organic compounds, by a factor of four, while increasing the removal efficiency of volatile organic compounds by a factor of 1.4. A company with a southern California office is conducting studies in conjunction with Lawrence Berkeley National Laboratory, with the goal of incorporating the ITAC catalytic air cleaning technology in their future commercial products.

  16. The local implementation of clean(er) fuels policies in Europe. A Handbook with guidelines. Final version

    International Nuclear Information System (INIS)

    Mulder, F.; Amara, Sliman Abu; Uustal, M.; Pelkmans, L.; Devriendt, N.; Rogulska, M.; Defranceschi, P.

    2009-05-01

    This handbook aims to guide the local/regional governments all over Europe who are involved in implementing clean(er) fuel policies in transport. The general challenge these governments are facing is how local policies on clean(er) fuels and vehicles can be made operational. Hence, how can the step be made from a vision on the strategic policy level, to a vision on the implementation of these policies. A local/regional policy on clean(er) fuels and vehicles is commonly part of the larger category 'sustainable transport policy', which in itself is part of a broader local environmental policy. The encompassing local/regional sustainable mobility policy will in most cases be based on the three well known main policy aims in this area: CO2 reduction; Improving the local air quality; and Improving the security of supply (locally often less stressed). This handbook will focus on the actual implementation of a clean(er) fuels and vehicles policy. It will describe the main challenges and how these can be overcome. It will describe how the market conditions for clean(er) fuels and vehicles can be created by establishing the vital market elements and which process is required to do so. And it will show how local enterprises can be involved and what the role of the local governments in this process can be. In order to identify the local success factors in overcoming the main challenges for implementation, case studies have been carried out in three European cities, namely Stockholm (Sweden), Graz (Austria) and Lille (France). The choice of these cities was based on their successes in implementing clean(er) fuel policies (although they followed different paths) and the fact that they managed to achieve ambitious clean(er) fuel/ clean(er) vehicle targets. These cities may thus be considered as ?good practice examples?. The case studies are based on existing literature, on multiple stakeholders? interviews in all three cities, and on two small surveys. The objectives of this

  17. Ultra-Stable, New Generation Q-Switched Monolithic Laser Cleaners for Fine Art Conservation

    Science.gov (United States)

    Brioschi, F.; Salvadeo, P.

    The increasing use of laser cleaners in fine art conservation boosts the demand on improvements of the laser performances. More power and more wavelengths are required by the current applications, while laser should be more reliable, rugged and compact. The characteristics and performances of a new generation of laser cleaners are presented as a result of a dedicated research and development program.

  18. Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company

    Directory of Open Access Journals (Sweden)

    Yaghob Asadizadeh

    2018-02-01

    Full Text Available Cleaner production process is an environmentally friendly approach that attempts to reduce waste and energy consumption then reduce environmental pollutions of industrial processes to provide the possibility of sustainable production in industrial units. To achieve this goal and alignment with cleaner production strategies, paper industries should consider reducing wastes of production processes and irregular consumption of energy as a priority in their programs. In this research Analytic Hierarchy Process has been applied and a three level hierarchy model was structured to facilitate the cleaner production process in Latif paper products firm. Using a literature review and field study, the proposed model provided a framework for cleaner production implementation in the firm. Results showed priorities of the main criteria of cleaner production are process change, product modification, implementation of preventive maintenance system, resititution and man force capitals respectively. Process change criterion allocated 40 percent of the total weighing value and has the highest priority in implementation of cleaner production strategy. Existence of industrial automation and its technology level which is a sub criterion of process change has the highest priority among 31 sub criteria. Also some of higher priority sub criteria such as use of higher quality inclusion and implementation of calibration system are related to process change. Therefore, to achieve cleaner production goals and implementation of its strategic objectives it is necessary to pay more attention to this criterion. Inconsistency ratio of the research is 0.06 which indicates the results are compatible. The results of this research can be used to accelerate the implementation of cleaner production process in Iran’s pulp and paper industry.

  19. Research on Duct Flow Field Optimisation of a Robot Vacuum Cleaner

    Directory of Open Access Journals (Sweden)

    Xiao-bo Lai

    2011-11-01

    Full Text Available The duct of a robot vacuum cleaner is the length of the flow channel between the inlet of the rolling brush blower and the outlet of the vacuum blower. To cope with the pressure drop problem of the duct flow field in a robot vacuum cleaner, a method based on Pressure Implicit with Splitting of Operators (PRISO algorithm is introduced and the optimisation design of the duct flow field is implemented. Firstly, the duct structure in a robot vacuum cleaner is taken as a research object, with the computational fluid dynamics (CFD theories adopted; a three-dimensional fluid model of the duct is established by means of the FLUENT solver of the CFD software. Secondly, with the k-∊ turbulence model of three-dimensional incompressible fluid considered and the PRISO pressure modification algorithm employed, the flow field numerical simulations inside the duct of the robot vacuum cleaner are carried out. Then, the velocity vector plots on the arbitrary plane of the duct flow field are obtained. Finally, an investigation of the dynamic characteristics of the duct flow field is done and defects of the original duct flow field are analysed, the optimisation of the original flow field has then been conducted. Experimental results show that the duct flow field after optimisation can effectively reduce pressure drop, the feasibility as well as the correctness of the theoretical modelling and optimisation approaches are validated.

  20. Research on Duct Flow Field Optimisation of a Robot Vacuum Cleaner

    Directory of Open Access Journals (Sweden)

    Xiao-bo Lai

    2011-11-01

    Full Text Available The duct of a robot vacuum cleaner is the length of the flow channel between the inlet of the rolling brush blower and the outlet of the vacuum blower. To cope with the pressure drop problem of the duct flow field in a robot vacuum cleaner, a method based on Pressure Implicit with Splitting of Operators (PRISO algorithm is introduced and the optimisation design of the duct flow field is implemented. Firstly, the duct structure in a robot vacuum cleaner is taken as a research object, with the computational fluid dynamics (CFD theories adopted; a three‐dimensional fluid model of the duct is established by means of the FLUENT solver of the CFD software. Secondly, with the k‐ε turbulence model of three‐ dimensional incompressible fluid considered and the PRISO pressure modification algorithm employed, the flow field numerical simulations inside the duct of the robot vacuum cleaner are carried out. Then, the velocity vector plots on the arbitrary plane of the duct flow field are obtained. Finally, an investigation of the dynamic characteristics of the duct flow field is done and defects of the original duct flow field are analysed, the optimisation of the original flow field has then been conducted. Experimental results show that the duct flow field after optimisation can effectively reduce pressure drop, the feasibility as well as the correctness of the theoretical modelling and optimisation approaches are validated.

  1. The association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark.

    Science.gov (United States)

    Carneiro, Isabella G; Rasmussen, Charlotte D N; Jørgensen, Marie B; Flyvholm, Mari-Ann; Olesen, Kasper; Madeleine, Pascal; Ekner, Dorte; Søgaard, Karen; Holtermann, Andreas

    2013-05-01

    The aim of the study is to investigate the association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark. This study is based on a cross-sectional analysis of baseline data from 2007 to 2008. The study population includes 276 cleaners, 144 Danish and 132 non-Western immigrant cleaners. Cumulative sickness absences during a 6-month period from administrative records were subdivided into no sickness absence (0 days), low occurrence of sickness absence (1-10 days) and high occurrence of sickness absence (over 10 days). Measures of health consisted of self-report and objective assessments. The relationship between sickness absence and health was analyzed through multinomial logistic regression, stratified by immigrant status. For both Danish and non-Western immigrant cleaners, poor self-reported health was significantly related to high occurrence of sickness absence. Among Danish cleaners, high blood pressure was related to high occurrence of sickness absence. Among non-Western immigrant cleaners, total body pain and having one or more diagnosed chronic disease were related to high occurrence of sickness absence. No association between health and low occurrence of sickness absence was found. The findings confirm the importance of health for high occurrence of sickness absence, in both ethnic groups. Moreover, low occurrence of sickness absence was not related to the health conditions investigated.

  2. On Cleaner Technologies in a Transboundary Pollution Game

    NARCIS (Netherlands)

    Benchekroun, H.; Ray Chaudhuri, A.

    2009-01-01

    We show that in a non-cooperative transboundary pollution game, a cleaner technology (i.e., a decrease in the emission to output ratio) induces each country to increase its emissions and ultimately can yield a higher level of pollution and reduce social welfare.

  3. A Case Study of Air Cleaner by the Intelligent Interaction and Emotion

    Science.gov (United States)

    Cao, Huai; Sun, Yuwen

    2018-02-01

    The pure and fresh air can not only contribute to our physical and mental health, but also can be beneficial to ease the pressure and relax the mood. The vertical intelligent air cleaner can remove the harmful gases from the air and absorb the suspended particles in the air, especially all kinds of the bacteria and viruses. The air cleaner is good for improving the air quality of the indoor and maintaining the health of the people. The designing of the vertical air cleaner is as follows: The designing of the vertical intelligent make full use of the developed air purification technology. The smart home is inserted into the work. Simultaneously, in the aspect of the design of intelligent products, the intelligent interactive processes are scientifically planned. Moreover, the emotional design and the user experience are fully considered, which can enhance the comprehensive design ability.

  4. Guide to cleaner coal technology-related web sites

    Energy Technology Data Exchange (ETDEWEB)

    Davidson, R; Jenkins, N; Zhang, X [IEA Coal Research - The Clean Coal Centre, London (United Kingdom)

    2001-07-01

    The 'Guide to Cleaner Coal Technology-Related Web Sites' is a guide to web sites that contain important information on cleaner coal technologies (CCT). It contains a short introduction to the World Wide Web and gives advice on how to search for information using directories and search engines. The core section of the Guide is a collection of factsheets summarising the information available on over 65 major web sites selected from organizations worldwide (except those promoting companies). These sites contain a wealth of information on CCT research and development, technology transfer, financing and markets. The factsheets are organised in the following categories. Associations, research centres and programmes; Climate change and sustainable development; Cooperative ventures; Electronic journals; Financial institutions; International organizations; National government information; and Statistical information. A full subject index is provided. The Guide concludes with some general comments on the quality of the sites reviewed.

  5. Visibility and Social Recognition as Psychosocial Work Environment Factors among Cleaners in a Multi-Ethnic Workplace Intervention

    Directory of Open Access Journals (Sweden)

    Kirsten Hviid

    2012-12-01

    Full Text Available This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants’ low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention called “Make a Difference” designed to improve the work environment among cleaners at a multi-ethnic workplace. We used semi-structured interviews, photo logs, observation and participation to investigate how the cleaners experienced their work environment. The cleaners reported an overload of heavy work, related to the concept of a classroom’s “readiness for cleaning”, and they expressed strained social relations and communication in addition to a lack of social recognition and invisibility at the workplace, a school. We analysed these psychosocial work environmental problems by investigating the different forms of social relationships and communication within the group of cleaners, and between the cleaners and the teachers and pupils at the school. Moreover, we discussed why the intervention, based on training of language and cleaning skills and social interaction, only partially improved the cleaners’ psychosocial work environment problems. In this article, we argue that social divisions based on ethnicity between the new and the established group of cleaners, combined with their marginal position and poor work organisation at the school, reinforced the cleaners’ experiences of psychosocial work environment problems. This article suggests that increased effort towards social inclusion at work and improved work organisation, especially for the new labour migrants from newer EU-countries, should be considered.

  6. Evaluation of heat stress in dry cleaner units:A case study in Qom, Iran

    Directory of Open Access Journals (Sweden)

    Javad Malakouti

    2016-04-01

    Full Text Available Background & Aims of the Study: Nowadays, heat stress is one of the most harmful physical agents in workplaces. According to the consequences of heat stress and have no information about it in Qom dry cleaner units, Iran, this study have been designed to evaluate the heat stress among workers of dry cleaner units in Qom province of Iran, in Jul-Aug 2011. Materials & Methods: This cross-sectional study was conducted in 113 units of active dry cleaner units. WBGT (Wet Bulb Globe Temperature index was selected for heat stress evaluation. In order to measure the requisite parameters, WBGT meter made of Casella Company had been used according to ISO 7243. Data had been analyzed according to Occupational Exposure Limits (OELs with SPSS V.16, using analysis of variance, independent T and LSD tests. Results: The average of WBGT index in Qom dry cleaner units of Iran were 28.98±1.64 °C. The average of WBGT index in 66.4% of units was up to 28°C. The average of relative humidity was 42.86%, the average of wet bulb temperature and globe temperature were 25.56°C and 36.72°C, respectively. The findings showed a significant correlation between the average of WBGT index and the standard recommendation level (p<0.0001. In dry cleaner units with less than 10 m2 area, heat stress was higher than other units  significantly (p<0.05. Conclusions: Heat stress in many dry cleaner units in Qom, Iran, was more than recommended OELs. Because of wet bulb and globe temperature in units were high value, the most important measures to heat controls, are technical engineering controls such as  radiation shield, insulation on boilers and modify the cooling systems.

  7. What characterizes cleaners sustaining good musculoskeletal health after years with physically heavy work?

    DEFF Research Database (Denmark)

    Holtermann, A; Blangsted, A K; Christensen, H

    2009-01-01

    OBJECTIVES: The aim of this case-control study was to investigate characteristics of cleaners with good musculoskeletal health after years with physically heavy work. METHODS: One hundred and 41 female seniority cleaners participated. Twenty-five reported no musculoskeletal symptoms, whereas 83...... reported severe symptoms in the low back, neck shoulders or upper limbs. The groups were of matching age, height, body weight and seniority (19 years). Muscular strength was recorded by isometric maximal voluntary contractions on a day without pain. Exposure to physical risk factors at work, psychosocial...... work factors, and leisure time physical activity were assessed by a postal questionnaire. RESULTS: Cleaners with good musculoskeletal health were not reporting different exposure to physical risk factors at work or leisure time physical activity, but had higher muscular strength and reported higher...

  8. 7 CFR 2902.18 - Hand cleaners and sanitizers.

    Science.gov (United States)

    2010-01-01

    ..., DEPARTMENT OF AGRICULTURE GUIDELINES FOR DESIGNATING BIOBASED PRODUCTS FOR FEDERAL PROCUREMENT Designated... the purposes of this rule. (b) Minimum biobased content. The minimum biobased content requirement for all hand cleaners and/or sanitizers shall be based on the amount of qualifying biobased carbon in the...

  9. Control of respirable particles and radon progeny with portable air cleaners

    International Nuclear Information System (INIS)

    Offermann, F.J.; Sextro, R.G.; Fisk, W.J.; Nazaroff, W.W.; Nero, A.V.; Revzan, K.L.; Yater, J.

    1984-02-01

    Eleven portable air cleaning devices have been evaluated for control of indoor concentrations of respirable particles and radon progeny. Following injection of cigarette smoke and radon in a room-size chamber, decay rates for particles and radon progeny concentrations were measured with and without air cleaner operation. Particle concentrations were obtained for total number concentration and for number concentration by particle size. In tests with no air cleaner the natural decay rate for cigarette smoke was observed to be 0.2 hr -1 . Air cleaning rates for particles were found to be negligible for several small panel-filters, a residential ion-generator, and a pair of mixing fans. The electrostatic precipitators and extended surface filters tested had significant particle removal rates, and a HEPA-type filter was the most efficient air cleaner. The evaluation of radon progeny control produced similar results; the air cleaners which were effective in removing particles were also effective in removing radon progeny. At low particle concentrations plateout of the unattached radon progeny is an important removal mechanism. Based on data from these tests, the plateout rate for unattached progeny was found to be 15 hr -1 . The unattached fraction and the overall removal rate due to deposition of attached and unattached nuclides have been estimated for each radon decay product as a function of particle concentration. While air cleaning can be effective in reducing total radon progeny, concentrations of unattached radon progeny can increase with increasing air cleaning. 39 references, 26 figures, 9 tables

  10. The Urban Function of the Infraordinary: Dry Cleaners as Social Vertexes

    DEFF Research Database (Denmark)

    Lunde Nielsen, Espen

    2015-01-01

    of social coexistence that has ‘a function that is separate from their practical use’ (Jorn 1954). A London dry cleaner serves as testing ground, employing critical spatial practices and creative writing as research tools. The dry cleaner does not simply clean clothes, but is a social vertex and physical...... interface through which (non-)events unfold, trajectories thickens and people of the neighbourhood coexists as familiar strangers (Milgram 2010; Paulos and Goodman 2004) through events in real-time and deposits over time. It is a semi-public space and an implosion of the external neighbourhood, partly...

  11. Cleaners in reducing the hazards of indoor radon decay products

    International Nuclear Information System (INIS)

    Montassier, N.; Hopke, P.K.; Shi, Y.; Wasiolek, P.; McCallum, B.

    1992-01-01

    The objective of this study was to evaluate the influence of three types of air cleaners on the concentration and size distribution of radon progeny in a normally occupied house. Using an automated, semi-continuous, graded-screen array system and a radon monitor, the activity size distribution and radon concentration was measured and the exposure of the occupants of the home to radon could be assessed. The dose model developed as part of the recently released U.S. National Academy of Sciences report was used to related the exposure to deposited dose in the tissue of the bronchial epithelium. Thus, the effectiveness of the air cleaners in reducing both exposure and dose were evaluated. (author)

  12. Psychosocial work environment among immigrant and Danish cleaners

    DEFF Research Database (Denmark)

    Olesen, Kasper; Carneiro, Isabella G; Jørgensen, Marie B

    2012-01-01

    Non-Western cleaners have been shown to have poorer health than their Danish colleagues. One reason could be a poorer psychosocial work environment. However, it is unknown if differences in self-reported psychosocial work environment exist between non-Western and Danish workers within the same so...

  13. Cleaner Production: A Growing Movement in Brazilian Companies

    Directory of Open Access Journals (Sweden)

    Oduvaldo Vendrametto

    2010-03-01

    Full Text Available Cleaner Production (CP is gaining emphasis in both world and Brazilian production sectors. Nature’s warnings indicating the exhaustion of any capacity to absorb and regenerate waste, stricter legislation regarding pollution emitters, market competitiveness associated with environmental and social responsibility cause concerns and lead to actions to reduce aggressions against the environment. This paper shows evidence of this concern and presents cases in which a large automotive industry, acting as a partner to suppliers, promotes changes in how it delivers its products, eliminating large cardboard, plastic and wood packaging. A small company had a similar initiative, reducing the use of cardboard and plastic packaging. More important is the revelation of a widely dispersed, yet growing and incremental movement of responsibilities among companies.The benefits of cleaner production implementation were evaluated by confronting environmental and financial assessment. For the ambient evaluation, it will be used methodology of Material Intensity (Wuppertal Institute, a.

  14. Pressure pain sensitivity maps, self-reported musculoskeletal disorders and sickness absence among cleaners

    DEFF Research Database (Denmark)

    Binderup, Asbjørn Thalund; Holtermann, Andreas; Søgaard, Karen

    2011-01-01

    back regions (27 points). LTSA was defined as ten or more consecutive workdays with sick leave. RESULTS: The PPT maps revealed the spatial heterogeneity in mechanical sensitivity among cleaners. The level of pain in the neck and dominant shoulder and upper back within the last 7 days correlated......BACKGROUND: Pressure pain threshold mapping is a valuable method for the identification of distinct zones of mechanical pain sensitivity. Such approach was applied for the first time in relation to self-reported musculoskeletal disorders and long-term sickness absence (LTSA) within the last 12...... months among cleaners. METHODS: About 29 cleaners filled out a self-administered questionnaire regarding health, work-related measures and musculoskeletal disorders. Subsequently, PPTs were measured at (1) tibialis anterior (control location, 1 point), (2) the neck-shoulder (48 points) and (3) the low...

  15. Breathing easier: Indonesia works towards cleaner air

    International Nuclear Information System (INIS)

    Madsen, Michael Amdi

    2015-01-01

    Indonesians can look forward to breathing cleaner air following upcoming changes in regulations introduced as a result of a study conducted using nuclear analytical techniques. Lead pollution and other fine particulate matter in the air is now, for the first time, being accurately monitored and is giving Indonesian officials a good understanding of their air pollution problem and how to manage it.

  16. Regenerating using aqueous cleaners with ozone and electrolysis

    Science.gov (United States)

    McGinness, Michael P.

    1994-02-01

    A new process converts organic oil and grease contaminates in used water based cleaners into synthetic surfactants. This permits the continued use of a cleaning solution long after it would have been dumped using previously known methods. Since the organic soils are converted from contaminates to cleaning compounds the need for frequent bath dumps is totally eliminated. When cleaning solutions used in aqueous cleaning systems are exhausted and ready for disposal, they will always contain the contaminates removed from the cleaned parts and drag-in from prior cleaning steps. Even when the cleaner is biodegradable these contaminants will frequently cause the waste cleaning solution to be a hazardous waste. Chlorinated solvents are rapidly being replaced by aqueous cleaners to avoid the new ozone-depletion product-labeling-law. Many industry standard halocarbon based solvents are being completely phased out of production, and their prices have nearly tripled. Waste disposal costs and cradle-to-grave liability are also major concerns for industry today. This new process reduces the amount of water and chemicals needed to maintain the cleaning process. The cost of waste disposal is eliminated because the water and cleaning compounds are reused. Energy savings result by eliminating the need for energy currently used to produce and deliver fresh water and chemicals as well as the energy used to treat and destroy the waste from the existing cleaning processes. This process also allows the cleaning bath to be maintained at the peak performance of a new bath resulting in decreased cycle times and decreased energy consumption needed to clean the parts. This results in a more efficient and cost effective cleaning process.

  17. Increased participation among cleaners as a strategy to improve quality and occupational health

    OpenAIRE

    Öhrling, Therese

    2014-01-01

    Like many other industries, today the cleaning industry is affected more than ever by competition and pressure toward low prices, which leads to a nonadvantageous situation for cleaners. These days many Swedish municipalities choose to outsource cleaning service in order to save money, although the situation for the cleaners appears to be worsening. The aim of this paper is to evaluate an alternative organizational structure within a Swedish public cleaning division to investigate how good wo...

  18. Cleaner Technologies and the Stability of International Environmental Agreements

    NARCIS (Netherlands)

    Benchekroun, H.; Ray Chaudhuri, A.

    2012-01-01

    Abstract: This paper shows that, if countries are farsighted when deciding whether to defect from a coalition, then the implementation of cleaner technologies may jeopardize the chances of reaching an international environmental agreement. The grand coalition may be destabilized by the

  19. Screening for common mental disorders and substance abuse among temporary hired cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate.

    Science.gov (United States)

    Abbas, R A; Hammam, R A M; El-Gohary, S S; Sabik, L M E; Hunter, M S

    2013-01-01

    Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egypt. All participants were invited to complete a structured questionnaire through a semi-structured interview which included the self-reporting questionnaire 20 items (SRQ-20) and the work stress scale. Assessment of drug use included urine-based screening tests for common substances abused. The prevalence of job stress, common mental disorders and substance abuse, particularly tramadol and cannabis (Bango), was significantly higher in the studied temporary cleaners compared to permanent cleaners. Risk factors associated with increased susceptibility of the temporary cleaners to common mental disorders were family history of substance abuse, high crowding index, history of physical illness, low educational level, and smoking; while being unmarried, male sex, family history of mental disorder, age ≥40 years, smoking, and length of service ≥8 years, were associated with substance abuse among the same group. Temporary hired hospital cleaners suffered from impaired mental health more than permanent cleaners. Therefore, expanding the coverage of current laws and occupational safety and health standards to cover workers in the informal sector especially in developing countries is recommended.

  20. Screening for Common Mental Disorders and Substance Abuse among Temporary Hired Cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate

    Directory of Open Access Journals (Sweden)

    RA Abbas

    2012-12-01

    Full Text Available Background: Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. Objectives: To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. Methods: A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egypt. All participants were invited to complete a structured questionnaire through a semi-structured interview which included the self-reporting questionnaire 20 items (SRQ-20 and the work stress scale. Assessment of drug use included urine-based screening tests for common substances abused. Results: The prevalence of job stress, common mental disorders and substance abuse, particularly tramadol and cannabis (Bango, was significantly higher in the studied temporary cleaners compared to permanent cleaners. Risk factors associated with increased susceptibility of the temporary cleaners to common mental disorders were family history of substance abuse, high crowding index, history of physical illness, low educational level, and smoking; while being unmarried, male sex, family history of mental disorder, age ≥40 years, smoking, and length of service ≥8 years, were associated with substance abuse among the same group. Conclusion: Temporary hired hospital cleaners suffered from impaired mental health more than permanent cleaners. Therefore, expanding the coverage of current laws and occupational safety and health standards to cover workers in the informal sector especially in developing countries is recommended.

  1. Ethnic Mobilization among Korean Dry Cleaners

    OpenAIRE

    Thomas, Ward F; Ong, Paul

    2015-01-01

    Korean immigrants in the U.S. rely heavily on ethnic resources to start small businesses.  Ethnic resources include business networks and knowledge, start-up capital, and access to labor power that are embedded in networks of family, friends, and co-ethnics.  This paper shows how Korean dry cleaners in Southern California used ethnic resources to mobilize in response to an environmental policy initiated by the South Coast Air Quality Management District (AQMD).  While Korean immigrants used e...

  2. Actual problems of municipal cleaner’s waste waters

    Directory of Open Access Journals (Sweden)

    Konko¾ová Patrícia

    2000-03-01

    Full Text Available In paper are evaluated social and economical changes in water economy with emphasis on complex evaluation of municipal cleaner’s waste waters with respect of legislative, position of ownerskip relationskips and financial security of public experiences of water economy.

  3. Third quarterly report and final report within the counterpart subcontract no. 97/219: Support to the National Cleaner Production Centre, Tanzania

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1999-01-01

    The report analyses barriers and incentivres to cleaner production in Tanznaia based on experiences in three demonstration projects with around 25 companies.An outline for a policy study on cleaner production in Tanzania and for the strengthening of cleaner production in Tanzania is given....

  4. The association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark

    DEFF Research Database (Denmark)

    Carneiro, Isabella G.; Rasmussen, Charlotte D. N.; Jørgensen, Marie B.

    2013-01-01

    PURPOSE: The aim of the study is to investigate the association between health and sickness absence among Danish and non-Western immigrant cleaners in Denmark. METHODS: This study is based on a cross-sectional analysis of baseline data from 2007 to 2008. The study population includes 276 cleaners...

  5. Physical Fitness of Cleaners in Faculty of Medicine Universitas Padjadjaran, November 2012

    Directory of Open Access Journals (Sweden)

    Adi Wibisono Sulistijo

    2015-09-01

    Full Text Available Background: Cleaning is an occupation that is carried out worldwide in many different environments. Cleaning workers (cleaners often have low occupational skills and belong to the less advantaged educational and socioeconomic groups. Because of the high physical work demands and low cardiorespiratory fitness, cleaners have the risk to have cardiovascular diseases. The aim of this study was to measure the 5 components of physical fitness (cardiorespiratory endurance, muscle endurance, muscle strength, flexibility and body composition of cleaners in Faculty of Medicine Universitas Padjadjaran. Methods: A descriptive study was carried out to all cleaners (31 persons of Faculty of Medicine Universitas Padjadjaran in November 2012. The subjects were tested for cardiorespiratory endurance, muscle endurance, muscle strength, flexibility and body composition. The results were categorized using the standard of Ministry of Health Republic Indonesia. Results: From 31 subjects, cardiorespiratory endurance was in poor category (50%. Shoulder and hand muscle endurance was in poor category (54.8% and stomach muscle endurance was in very poor category (67.7%. Hand−grip muscular strength was in very poor category: right hand (80.7% and left hand (87.1%. Back muscle strength was in poor category (58.1%. Leg muscular strength was in very poor category (48.4%. Flexibility was in a very good category (97% and body composition was also in a good category (54.8%. Conclusions: From 5 components of cleaners’ physical fitness, 3 components (cardiorespiratory endurance, muscle endurance and muscular strength are in poor and very poor category.

  6. Primary DNA Damage in Dry Cleaners with Perchlorethylene Exposure

    Directory of Open Access Journals (Sweden)

    Mohammad Azimi

    2017-10-01

    Full Text Available Background: Perchloroethylene is a halogenated solvent widely used in dry cleaning. International agency of research on cancer classified this chemical as a probable human carcinogen. Objective: To evaluate the extent of primary DNA damage in dry cleaner workers who were exposed to perchloroethylene as compared to non-exposed subjects. The effect of exposure modifying factors such as use of personal protective equipment, perceived risk, and reported safe behaviors on observed DNA damage were also studied. Methods: 59 exposed and non-exposed workers were selected from Yazd, Iran. All the 33 exposed workers had work history at least 3 months in the dry cleaning shops. Peripheral blood sampling was performed. Microscope examination was performed under fluorescent microscope (400×. Open comet software was used for image analysis. All biological analysis was performed in one laboratory. Results: Primary DNA damage to leukocytes in dry cleaners was relatively high. The median tail length, %DNA in tail, and tail moment in exposed group were significantly higher than those in non-exposed group. There was no significant difference between smokers and nonsmokers in terms of tail length, tail moment, and %DNA in tail. There was no significant correlation between duration of employment in dry cleaning and observed DNA damage in terms of tail length, tail moment and %DNA in tail. Stratified analysis based on exposed and nonexposed category showed no significant relationship between age and observed DNA damage. Conclusion: Occupationally exposure to perchloroethylene can cause early DNA damage in dry cleaners.

  7. Implementing Cleaner Production as an Environmental Management Efforts in Small Industries of Cassava Chips

    Directory of Open Access Journals (Sweden)

    Rahmadyanti Erina

    2016-01-01

    Full Text Available Small and Medium Enterprises (SMEs is one of the major driving factors for Indonesian economy, especially in food processing industries. The cassava-based industry is one type of food and beverage industry with chips as its major product. The limitations of knowledge caused their activities to only aim at pursuing economic benefits and ignoring the environmental balance. The most appropriate preventive method used, according to the characteristics of SMEs in Indonesia, is Cleaner Production. This study aims to reduce the risk of environmental pollution caused by the waste production of small chips industries by implementing cleaner production. The method used in this study is quick scanning by analyzing mass balance, energy, and utilities that aim to find an inefficient process to minimize losses. Implementation of cleaner production may include good housekeeping, reducing, and reusing. Based on the assessment of alternative eligibility criteria, the equipment modifications are the main factor in implementing cleaner production that drives the profits by providing efficiency of cutting as much as 80 percent and optimizes the profits into 57.62 kg in a month or 691.44 kg in a year. If the price of cassava chips is IDR 40,000 in a kg, then it would save IDR 27,657,600 in a year.

  8. Cleaner production for solid waste management in leather industry ...

    African Journals Online (AJOL)

    Cleaner production for solid waste management in leather industry. ... From the processes, wastes are generated which include wastewater effluents, solid wastes, and hazardous wastes. In developing countries including Ethiopia, many ... The solid waste inventory of the factory has been carried out. The major problems ...

  9. GAS-PHASE AND PARTICULATE EMISSIONS DURING APPLICATION OF A WATER-BASED CLEANER WITH A HAND-PUMP SPRAYER

    Science.gov (United States)

    The paper gives results of tests in a controlled environment test room to measure concentrations of 2-butoxyethanol and particles during application of a cleaner to realistic surfaces (counter tops, glass, walls). (NOTE: Users of water-based cleaners applied with hand-pump spray...

  10. Back to Office Report. Mission no.1 to Tanzania as counterpart institution to Cleaner Production Centre of Tanzania

    DEFF Research Database (Denmark)

    Jørgensen, Michael Søgaard

    1996-01-01

    A presentation of some important actors and institutions in the capacity building within cleaner production in Tanzania......A presentation of some important actors and institutions in the capacity building within cleaner production in Tanzania...

  11. Effects on musculoskeletal pain, work ability and sickness absence in a 1-year randomised controlled trial among cleaners

    DEFF Research Database (Denmark)

    Jørgensen, Marie B.; Faber, Anne; Hansen, Jørgen V.

    2011-01-01

    Only a few workplace initiatives among cleaners have been reported, even though they constitute a job group in great need of health promotion. The purpose of this trial was to evaluate the effect of either physical coordination training or cognitive behavioural training on musculoskeletal pain......, work ability and sickness absence among cleaners. A cluster-randomised controlled trial was conducted among 294 female cleaners allocated to either physical coordination training (PCT), cognitive behavioural training (CBTr) or a reference group (REF). Questionnaires about musculoskeletal pain and work...... intervention appeared effective for reducing chronic neck/shoulder pain among the female cleaners. It is recommended that future interventions among similar high-risk job groups focus on the implementation aspects of the interventions to maximise outcomes more distal from the intervention such as work ability...

  12. Successes emerge in search for cleaner processes

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Faced with mounting public and regulatory pressures, many chemical producers have long adopted pollution reduction efforts. But increasingly, firms are eyeing fundamental process changes to achieve cleaner technologies. In addition to environmental benefits, the promised economic payoffs are clear: higher yields and an escape from soaring waste treatment and disposal costs. Having such technologies, says Paolo Galli, Montecatini's (Milan) director/corporate research, is a tremendous tool. It's becoming an increasingly important competitive element. Indeed, suggests David Hyde, ICI's (London) manager/environmental technology, everyone is looking to use cleaner technologies for a competitive advantage. A number of leading technology groups, including UOP (Des Plaines, IL), are working on replacing hydrofluoric acid (HF) with solid catalysts in alkylation processes. Although it is technologically tough to replace HF or alternative sulfuric acid technology, the rewards could be huge in producing high-octane fuel additives. Catalytica (Mountain View, CA), for one, is building a pilot plant with partners Neste (Helsinki) and Du Pont's Conoco. The company has developed a process to manufacture high-purity DMC by direct synthesis from carbom monoxide, methanol, and oxygen. The medium-pressure process uses a copper salts catalyst system; EniChem says the only significant by-product is carbon dioxide, and there are no chlorinated impurities

  13. Blood cleaner on-chip design for artificial human kidney manipulation

    Directory of Open Access Journals (Sweden)

    Suwanpayak N

    2011-05-01

    Full Text Available N Suwanpayak1, MA Jalil2, MS Aziz3, FD Ismail3, J Ali3, PP Yupapin11Nanoscale Science and Engineering Research Alliance (N'SERA, Advanced Research Center for Photonics, Faculty of Science, King Mongkut's Institute of Technology, Ladkrabang, Bangkok, Thailand; 2Ibnu Sina Institute of Fundamental Science Studies (IIS, 3Institute of Advanced Photonics Science, Nanotechnology Research Alliance, Universiti Teknologi Malaysia, Johor Bahru, MalaysiaAbstract: A novel design of a blood cleaner on-chip using an optical waveguide known as a PANDA ring resonator is proposed. By controlling some suitable parameters, the optical vortices (gradient optical fields/wells can be generated and used to form the trapping tools in the same way as optical tweezers. In operation, the trapping force is formed by the combination between the gradient field and scattering photons by using the intense optical vortices generated within the PANDA ring resonator. This can be used for blood waste trapping and moves dynamically within the blood cleaner on-chip system (artificial kidney, and is performed within the wavelength routers. Finally, the blood quality test is exploited by the external probe before sending to the destination. The advantage of the proposed kidney on-chip system is that the unwanted substances can be trapped and filtered from the artificial kidney, which can be available for blood cleaning applications.Keywords: optical trapping, blood dialysis, blood cleaner, human kidney manipulation

  14. Evaluation of ozone generation and indoor organic compounds removal by air cleaners based on chamber tests

    Science.gov (United States)

    Yu, Kuo-Pin; Lee, Grace Whei-May; Hsieh, Ching-Pei; Lin, Chi-Chi

    2011-01-01

    Ozone can cause many health problems, including exacerbation of asthma, throat irritation, cough, chest ache, shortness of breath, and respiratory infections. Air cleaners are one of the sources of indoor ozone, and thus the evaluation of ozone generated by air cleaners is desired significant issue. Most evaluation methods proposed are based on chamber tests. However, the adsorption and desorption of ozone on the wall of test chamber and the deposition of ozone resulted from the surface reaction can influence the evaluation results. In this study, we developed a mass balance model that took the adsorption, desorption and deposition of ozone into consideration to evaluate the effective ozone emission rates of six selected air cleaners. The experiments were conducted in a stainless steel chamber with a volume of 11.3 m 3 at 25 °C and 60% relative humidity. The adsorption, desorption and deposition rate constants of ozone obtained by fitting the model to the experimental data were k a = 0.149 ± 0.052 m h -1, k d = 0.013 ± 0.007 h -1, and k r = 0.050 ± 0.020 h -1, respectively. The effective ozone emission rates of Air Cleaners No. 1, 2, and 3 ranged between 13,400-24,500 μg h -1, 7190-10,400 μg h -1, and 4880-6560 μg h -1, respectively, which were more stable than those of No.4, 5, and 6. The effective ozone emission rates of Air Cleaners No. 4, 5, and 6 increased with the time of operation which might be relevant to the decrease of ozone removal by the "aging" filter installed in these cleaners. The removal of toluene and formaldehyde by these six air cleaners were also evaluated and the clean air delivery rates (CADRs) of these two pollutants ranged from non-detectable to 0.42 ± 0.08 m 3 h -1, and from non-detectable to 0.75 ± 0.07 m 3 h -1, respectively. The CADRs showed an insignificant relationship with the effective ozone emission rates. Thus, the removal of toluene and formaldehyde might be resulted from the adsorption on the filters and the

  15. Sustainability and cleaner production: a study on the implications competitive advantage in business

    Directory of Open Access Journals (Sweden)

    Jaqueline Guimarães Santos

    2015-08-01

    Full Text Available This paper discusses the relationship between the adoption of environmental management system in the business and the competitive advantages that can result from this process. Therefore, the effects are discussed the emergence of a model of sustainable development and the role and opportunities of the company that perspective. Being theoretical, the aim of this paper is to discuss the potential contributions that the implementation of cleaner production technology can offer to the enterprise competitive strategy. To elucidate these relationships are discussed concepts relating to the introduction of an environmental management system, which emphasized the use of environmental measures, specifically the inherent Cleaner Production that aim to reduce the environmental impacts of industrial production, eliminating waste and reducing costs. Moreover, the concept of competitive advantage is crafted light of assumptions Porter on profitability from cost reduction and product differentiation. The findings indicate that the introduction of the Cleaner Production to reduce costs and add value to the image of the product, is an instrument of competitiveness that allows the company to differentiate and gain competitive advantage.

  16. Screening for Common Mental Disorders and Substance Abuse among Temporary Hired Cleaners in Egyptian Governmental Hospitals, Zagazig City, Sharqia Governorate

    OpenAIRE

    RA Abbas; RAM Hammam; SS El-Gohary; LME Sabik; MS Hunter

    2012-01-01

    Background: Informal employment is common in developing countries, including Egypt. This type of employment may have significant consequences on mental health. Objectives: To determine the prevalence and risk factors of common mental disorders and substance abuse among temporary hired hospital cleaners. Methods: A cross-sectional study was conducted on 242 adult temporary cleaners and 209 permanent cleaners working in 4 governmental hospitals in Zagazig City, Sharqia Governorate, Egyp...

  17. Early retirement among Danish female cleaners and shop assistants according to work environment characteristics and upper extremity complaints

    DEFF Research Database (Denmark)

    Jensen, Lone Donbæk; Bonde, Jens Peter Ellekilde; Christensen, Michael Victor

    2016-01-01

    -year cohort study with registry-based follow-up of 1430 female cleaners and 579 shop assistants. In subsequent analyses of female cleaners, disability pension and voluntary early retirement were modeled according to work characteristics and upper extremity complaints. RESULTS: The adjusted hazard rate...

  18. Field Performance Test of an Air-Cleaner with Photocatalysis-Plasma Synergistic Reactors for Practical and Long-Term Use

    Directory of Open Access Journals (Sweden)

    Tsuyoshi Ochiai

    2014-10-01

    Full Text Available A practical and long-term usable air-cleaner based on the synergy of photocatalysis and plasma treatments has been developed. A field test of the air-cleaner was carried out in an office smoking room. The results were compared to previously reported laboratory test results. Even after a treatment of 12,000 cigarettes-worth of tobacco smoke, the air-cleaner maintained high-level air-purification activity (98.9% ± 0.1% and 88% ± 1% removal of the total suspended particulate (TSP and total volatile organic compound (TVOC concentrations, respectively at single-pass conditions. Although the removal ratio of TSP concentrations was 98.6% ± 0.2%, the ratio of TVOC concentrations was 43.8% after a treatment of 21,900 cigarettes-worth of tobacco smoke in the field test. These results indicate the importance of suitable maintenance of the reactors in the air-cleaner during field use.

  19. Laser cleaner development for decontamination of the primary water cooling system at nuclear power plants

    International Nuclear Information System (INIS)

    Minehara, Eisuke

    2010-01-01

    We recently have performed the feasibility studies to develop laser cleaners utilizing several laser oscillator and amplifier systems like femto-second free-electron lasers, water-jet guided lasers, Q-switched YAG lasers, fiber lasers. Whenever we used to clean the RI-contaminated surface using the lasers, we should focus enough laser power in the surface to evaporate instantly without melting. Therefore, as the contaminated being deeply located into the surface could be removed using any one set of the lasers, we found that every trial of laser cleaning could remove very well the RI contamination being located deeply. Our cold decontamination test using a model sample being Cobalt plated successfully has been performed to show a very high decontamination factor. In order to develop an usable laser cleaner, we plan to develop the prototype laser cleaner next year. (author)

  20. Life-History Traits and Population Structure of Pederson Cleaner Shrimps Ancylomenes pedersoni.

    Science.gov (United States)

    Gilpin, Jessica A; Chadwick, Nanette E

    2017-12-01

    Cleaner organisms perform key functional roles in reducing rates of parasitism in marine communities. Pederson cleaner shrimps Ancylomenes pedersoni are major cleaners of reef fishes in the tropical western Atlantic and form obligate symbioses with host sea anemones. Information about their life-history traits would contribute to understanding how symbiosis impacts life-history evolution in crustaceans, but little is known about patterns of growth and reproduction in this anemone shrimp. We quantified growth, sexual reproduction, senescence, and mortality in individuals of A. pedersoni under laboratory conditions and their abundance and population size structure on coral reefs in St. Thomas, U.S. Virgin Islands. Von Bertalanffy growth curves were fitted to the data to determine age-size relationships, and the Beverton-Holt model was used to estimate mortality rates and size at maximum yield. Individuals grew rapidly when young, then slowed their growth after reaching sexual maturity at ~6 months. Individuals were gonochoric, with males attaining significantly smaller body sizes and shorter life spans than did females. Prior to death at <2 years, members of both genders exhibited senescence during which they ceased reproducing, shrank (females only), and decreased their activity levels over ~1-4 weeks. Field populations were abundant and composed mostly of juveniles during both years examined. Populations appeared to be stable but highly dynamic in terms of individuals, reaching maximum yield at 4 months of age. We conclude that obligate symbiosis with large sea anemones and cleaner mutualism with reef fishes both contribute to explaining aspects of the life history of Pederson shrimps, especially their apparent mating system of pure-search polygynandry. This life-history information also provides a scientific basis for sustainable fishery management and aquaculture of this key coral reef organism.

  1. Region specific changes in nonapeptide levels during client fish interactions with allopatric and sympatric cleaner fish.

    Science.gov (United States)

    Soares, Marta C; Cardoso, Sónia C; Mazzei, Renata; André, Gonçalo I; Morais, Marta; Gozdowska, Magdalena; Kalamarz-Kubiak, Hanna; Kulczykowska, Ewa

    2017-01-01

    Social relationships are crucially dependent on individual ability to learn and remember ecologically relevant cues. However, the way animals recognize cues before engaging in any social interaction and how their response is regulated by brain neuromodulators remains unclear. We examined the putative involvement of arginine vasotocin (AVT) and isotocin (IT), acting at different brain regions, during fish decision-making in the context of cooperation, by trying to identify how fish distinguish and recognize the value of other social partners or species. We hypothesized that the behavioural responses of cleaner fish clients to different social contexts would be underlain by changes in brain AVT and IT levels. We have found that changes in AVT at the level of forebrain and optic tectum are linked with a response to allopatric cleaners (novel or unfamiliar stimuli) while those at cerebellum are associated with the willingness to be cleaned (in response to sympatric cleaners). On the other hand, higher brain IT levels that were solely found in the diencephalon, also in response to allopatric cleaners. Our results are the first to implicate these nonapeptides, AVT in particular, in the assessment of social cues which enable fish to engage in mutualistic activities.

  2. Evaluation of room air cleaners for the reduction of exposure and dose to indoor radon progeny

    International Nuclear Information System (INIS)

    Hopke, P.K.; Jensen, B.; Wasiolek, P.

    1994-01-01

    Since the proximate source of dose to the cells of the bronchial epithelium is the deposited radon progeny, the exposure and resulting dose could be reduced if the radon decay products were effectively removed from the indoor atmosphere. Thus, room air cleaners could be effective in reducing the risks associated with indoor radon. However, because of the short half-life of 218 Po, it grows back quickly and in the altered aerosol conditions that are produced by the presence of an air cleaner, the exposure/dose conditions as well as the magnitude of the dose can be substantially changed. To examine the nature of the exposure of individuals in normally occupied homes and to determine the effect of various types of room air cleaners on the exposure to and dose from the indoor radon progeny, a series of measurements have been made using an automated graded screen array system. Two extended experiments were performed in homes in Arnprior, Ontario and Parishville, NY, in which filtration systems, a positive ion electrostatic precipitator, and ioniser/fan systems have been tested for their ability to remove both airborne radioactivity and particles. In both experiments, measurements were made over one week periods with an air cleaner operating and the distributions of exposure are compared with measurements of the background conditions when no cleaner is functioning. The doses to both basal and secretory cells of the bronchial epithelium in the first eight generations of the bronchus were calculated using the model developed by James and their distributions are compared among the various exposure conditions. In most cases the presence of the air cleaner reduced the exposure to radon progeny. However, the reductions in dose were generally substantially smaller than the reductions in exposure. In the intercomparisons of the two filtration units and the two identical ioniser/fan systems, the units generally behaved in a similar manner. The results of this substantial set of

  3. Implementing Cleaner Technologies as a means of minimising waste production

    DEFF Research Database (Denmark)

    Wenzel, Henrik

    2002-01-01

    This article gives an overview of how Cleaner Production methods may contribute to minimising waste formation as well as showing energy and resource savings. It introduces the tools and procedures used when working in this field. It also illustrates the theoretical approach by using examples from...

  4. Design and development of automatic sharia compliant wheelchair wheels cleaner

    Science.gov (United States)

    Shaari, Muhammad Farid; Rasli, Ibrahim Ismail Mohammad; Jamaludin, M. Z. Z. Wan; Isa, W. A. Mohamad; M., H.; Rashid, A. H. Abdul

    2017-04-01

    Sharia compliant wheelchair wheel cleaner was developed in order to assist the muslim Person with Disabilities (PWD) to pray in the mosque without leaving their wheelchair because of the filthy wheels. Though there are many wheelchair wheel cleaning system in the market, it is very rare to find sharia compliant cleaning system that applies sertu concept which is one of the cleaning and purification technique in Islamic practice. The sertu concept is based on 6:1 ratio that refers to the six times pipe water cleaning and one time soiled water cleaning. The development process consists of design stage, fabrication and system installation stage and followed by testing stage. During the design stage, the proposed prototype underwent design brainstorming, operation programming and structural simulation analysis. Once fabricated, the cleaner prototype underwent was tested. The results showed that the prototype can cater load up to 100kg with 1.31×10-6 mm shaft bending displacement. The water ejection timing varied approximately 3% compared to the program.

  5. Cleaner production technology for the NDT industry

    International Nuclear Information System (INIS)

    Relunia, Estrella D.; Mateo, Alejandro J.

    2001-01-01

    This paper discusses te wastes generated from the conduct of nondestructive testing (NDT) techniques and operations like NDT film processing and the systems to reduce water pollution and the film system quality control. Discussions on clean technology production concepts and philosophy is also discussed. A case study on cleaner production technology where a process and equipment modifications and a product substitution were implemented is presented. The equipment modification and product substitution eliminated the use of 1,1,1-trichloroethane in its cleaning operation. (Author)

  6. EVALUATION AND ACTIONS OF CLEANER PRODUCTION IN GALVANIC INDUSTRY OF THE VILLA CLARA PROVINCE

    Directory of Open Access Journals (Sweden)

    Petra G. Velazco Pedroso

    2015-10-01

    Full Text Available In this paper, the assessment results accomplished in different processes of the galvanic industry are presented and it is taking into account the application of good practices and measures of Cleaner Production. The main critical points in the processes of metallic coating were identified; and the characterization of the effluents generated by the installation is done. A number of technological changes in the processes are proposed, as well as the introduction of cleaner production measures which contribute to increase the efficiency and safety of processes, reduce risks and improvements to internal operations. It provides advantages of economic, environmental and social nature for the galvanic industry due to the minimizing of the impacts on environment, because the sewage and its pollutant load are reduced. Besides, we can save water, energy and raw materials. The economic evaluation showed the feasibility of applying the Cleaner Production (PML measures proposed with a Net Present Value (NPV of $109 696.26, and an Internal Rate of Return (IRR of 64 % value and payback period lower than two years.

  7. Determination of Ammonia in Household Cleaners: An Instrumental Analysis Experiment.

    Science.gov (United States)

    Graham, Richard C.; DePew, Steven

    1983-01-01

    Briefly discusses three techniques for assessing amount of ammonia present in household cleaners. Because of disadvantages with these methods, the thermometric titration technique is suggested in which students judge the best buy based on relative cost of ammonia present in samples. Laboratory procedures, typical results, and reactions involved…

  8. Evaluation of cleaner production options in dyeing and printing industry: Using combination weighting method

    Science.gov (United States)

    Kang, Hong; Zhang, Yun; Hou, Haochen; Sun, Xiaoyang; Qin, Chenglu

    2018-03-01

    The textile industry has a high environmental impact so that implementing cleaner production audit is an effective way to achieve energy conservation and emissions reduction. But the evaluation method in current cleaner production audit divided the evaluation of CPOs into two parts: environment and economy. The evaluation index system was constructed from three criteria of environment benefits, economy benefits and product performance; weights of five indicators were determined by combination weights of entropy method and factor weight sorting method. Then efficiencies were evaluated comprehensively. The results showed that the best alkali recovery option was the nanofiltration membrane method (S=0.80).

  9. Mitigation of the effective dose of radon decay products through the use of an air cleaner in a dwelling in Okinawa, Japan

    International Nuclear Information System (INIS)

    Kranrod, Chutima; Tokonami, Shinji; Ishikawa, Tetsuo; Sorimachi, Atsuyuki; Janik, Miroslaw; Shingaki, Reina; Furukawa, Masahide; Chanyotha, Supitcha; Chankow, Nares

    2009-01-01

    Field measurements were conducted to assess the effects of an air cleaner on radon mitigation in a dwelling with a high radon concentration in Okinawa, Japan. The measurements included indoor radon concentration, individual radon progeny concentration, equilibrium equivalent concentration of radon (EECRn), unattached fraction, and size distribution of aerosol-attached radon progeny. These measurements were conducted in a 74 m 3 room with/without the use of an air cleaner. The results showed that the mean radon concentration during the measurement was quite high (301 Bq m -3 ). The operation of air cleaner decreased the radon progeny activity concentration, EECRn and equilibrium factor by 33%, 57% and 71%, respectively, whereas the unattached fraction increased by 174%. In addition, the activity concentration of attached radon progeny in the accumulation mode (50-2000 nm) was obviously deceased by 42%, when the air cleaner was operated. According to dosimetric calculations, the operation of air cleaner reduced the effective dose due to radon progeny by about 50%.

  10. Rancang Bangun Vacuum Cleaner Dengan Pengendali Nirkabel Menggunakan Modul Rf Data Transceiver Ys-1020ub Berbasis Mikrokontroler At89s52

    Directory of Open Access Journals (Sweden)

    IGAP Raka Agung

    2012-12-01

    Full Text Available Kebersihan merupakan hal yang sangat penting untuk menjaga kesehatan kita, khususnya kebersihan rumah. Rumah yang bersih sangat mempengaruhi kesehatan para penghuninya. Debu adalah kotoran yang paling sering mengotori rumah kita terutama pada bagian lantai. Setiap hari kita harus membersihkan rumah dari debu yang ada pada lantai untuk menjaga kebersihan sekaligus kesehatan kita. Dalam membersihkan lantai rumah dari  debu sering menyita banyak waktu dan tenaga. Vacuum cleaner terkendali nirkabel menggunakan Modul RF Data Transceiver YS-1020UB berbasis mikrokontroler AT89S52 merupakan salah satu solusi untuk membersihkan lantai rumah dari kotoran debu.  Vacuum cleaner ini menggunakan enam buah motor DC yaitu dua motor DC penyedot debu, dua motor DC penentu arah maju, mundur, belok kanan, dan belok kiri, serta dua motor DC penentu arah geser kanan dan geser kiri.  Vacuum cleaner ini dapat dikendalikan dengan dua mode operasi yaitu mode manual dan otomatis. Pada mode manual vacuum cleaner ini dikendalikan menggunakan remote control, dengan tranmisi nirkabel memakai transceiver YS-1020UB. Sedangkan pada mode otomatis  vacuum cleaner ini menggunakan empat buah sensor jarak untuk menghindari tabrakan pada dinding.  Vacuum cleaner dengan pengendali nirkabel menggunakan modul RF Data Transceiver YS-1020UB berbasis mikrokontroler AT89S52 sudah bisa membersihkan debu lantai sehingga lantai bersih dari debu.

  11. Sustainability in pelletizing iron ore through the Industrial Ecology and Cleaner Production Program

    Directory of Open Access Journals (Sweden)

    Cristiano Farias Coelho

    2013-06-01

    Full Text Available This study aims to analyze the practices of a pelletizing iron ore industry with respect to adoption of pollution prevention measures, suggested by applying the concepts of Cleaner Production and Material Flow Analysis. The technical procedure adopted was the case study, the data collection was done through direct observation, with field research and literature review. The main results were obtained from analysis of company reports available to the public, but require a more detailed quantification of data. The study concludes that the identification of environmental opportunities is possible through the proposed implementation of Cleaner Production program, which provides better results when combined with the precepts of the industrial ecology tool, the Material Flow Analysis.

  12. Cleaner Production Applied in a Small Furniture Industry in Brazil: Addressing Focused Changes in Design to Reduce Waste

    Directory of Open Access Journals (Sweden)

    Carlos Mario Gutiérrez Aguilar

    2017-10-01

    Full Text Available The wood industry is known for being among the biggest resource consumers, having a relatively low yield. The wood furniture industry as part of the wood industry also remains a big generator of residues and a big consumer of resources. Diverse solutions and technologies have been developed to deal with the residues generated, but those technologies are mostly applied at the end of the production chain with limited results. Cleaner production represents a program based on continuous strategies applied to a more sustainable use of materials and energy, minimizing waste and pollution. This paper presents a case study of a cleaner production program developed in a small furniture industry in Salvador de Bahia, Brazil, applying the concepts of cleaner production with parameters of ecodesign developed for the furniture industry. The object of study was the production of a wooden chair made from eucalyptus wood. The application of the cleaner production program and ecodesign parameters allowed a detailed characterization of the waste, resulting in opportunities for a reduction of the use of raw material by 30%, a reduction in waste by 49% and allowing a reduction in energy by 36% due to simplification of the productive process. Among the strategies applied were reshaping pieces, redesigning, and the substitution of materials. The results suggest that despite the existence of more complex environmental methods and approaches, the application of cleaner production plus ecodesign parameters could be more achievable for micro and small furniture industries.

  13. Control and automatic alignment of the output mode cleaner of GEO 600

    Energy Technology Data Exchange (ETDEWEB)

    Prijatelj, M; Grote, H; Degallaix, J; Hewitson, M; Affeldt, C; Leong, J; Lueck, H; Strain, K A; Wittel, H; Willke, B; Danzmann, K [Max-Planck-Institut fuer Gravitationsphysik (Albert-Einstein-Institut) and Leibniz Universitaet Hannover, Callinstr. 38, 30167 Hannover (Germany); Hild, S; Freise, A, E-mail: mirko.prijatelj@aei.mpg.d [School of Physics and Astronomy, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2010-05-01

    The implementation of a mode cleaner at the output port of the GEO 600 gravitational wave detector will be part of the upcoming transition from GEO 600 to GEO-HF. Part of the transition will be the move from a heterodyne readout to a DC readout scheme. DC readout performance will be limited by higher order optical modes and control sidebands present at the output port. For optimum performance of DC readout an output mode cleaner (OMC) will clean the output beam of these contributions. Inclusion of an OMC will introduce new noise sources whose magnitudes needed to be estimated and for which new control systems will be needed. In this article we set requirements on the performance of these control systems and investigate the simulated performance of different designs.

  14. Trochanteric Stress Fracture in a Female Window Cleaner

    OpenAIRE

    Lee, Bong-Jin; Song, Jyewon

    2016-01-01

    Stress fractures may occur at various sites in the femur including the head, neck, shaft, supracondylar and condylar regions. To the best of our knowledge, stress fracture occurring in the trochanteric region has not been previously reported. We report here a case of trochanteric stress fracture in a 53-year-old female window cleaner treated with hip nailing without adverse consequences. Careful consideration of this entity is needed when evaluating patients who have repetitive jumping up and...

  15. TNO moving forward ... to a safer, cleaner and more efficient mobility

    NARCIS (Netherlands)

    Bleijenberg, A.N.

    2008-01-01

    This book provides an impression of how we are contributing to cleaner, safer and more efficient mobility in Europe, helping our customers from concept to implementation and from engineering solutions to strategic advice. Our knowledge is derived to a significant extent from European research

  16. L(3)mbt and the LINT complex safeguard cellular identity in the Drosophila ovary.

    Science.gov (United States)

    Coux, Rémi-Xavier; Teixeira, Felipe Karam; Lehmann, Ruth

    2018-04-04

    Maintenance of cellular identity is essential for tissue development and homeostasis. At the molecular level, cell identity is determined by the coordinated activation and repression of defined sets of genes. The tumor suppressor L(3)mbt has been shown to secure cellular identity in Drosophila larval brains by repressing germline-specific genes. Here, we interrogate the temporal and spatial requirements for L(3)mbt in the Drosophila ovary, and show that it safeguards the integrity of both somatic and germline tissues. l(3)mbt mutant ovaries exhibit multiple developmental defects, which we find to be largely caused by the inappropriate expression of a single gene, nanos , a key regulator of germline fate, in the somatic ovarian cells. In the female germline, we find that L(3)mbt represses testis-specific and neuronal genes. At the molecular level, we show that L(3)mbt function in the ovary is mediated through its co-factor Lint-1 but independently of the dREAM complex. Together, our work uncovers a more complex role for L(3)mbt than previously understood and demonstrates that L(3)mbt secures tissue identity by preventing the simultaneous expression of original identity markers and tissue-specific misexpression signatures. © 2018. Published by The Company of Biologists Ltd.

  17. The hydrodynamic basis of the vacuum cleaner effect in continuous-flow PCNL instruments: an empiric approach and mathematical model.

    Science.gov (United States)

    Mager, R; Balzereit, C; Gust, K; Hüsch, T; Herrmann, T; Nagele, U; Haferkamp, A; Schilling, D

    2016-05-01

    Passive removal of stone fragments in the irrigation stream is one of the characteristics in continuous-flow PCNL instruments. So far the physical principle of this so-called vacuum cleaner effect has not been fully understood yet. The aim of the study was to empirically prove the existence of the vacuum cleaner effect and to develop a physical hypothesis and generate a mathematical model for this phenomenon. In an empiric approach, common low-pressure PCNL instruments and conventional PCNL sheaths were tested using an in vitro model. Flow characteristics were visualized by coloring of irrigation fluid. Influence of irrigation pressure, sheath diameter, sheath design, nephroscope design and position of the nephroscope was assessed. Experiments were digitally recorded for further slow-motion analysis to deduce a physical model. In each tested nephroscope design, we could observe the vacuum cleaner effect. Increase in irrigation pressure and reduction in cross section of sheath sustained the effect. Slow-motion analysis of colored flow revealed a synergism of two effects causing suction and transportation of the stone. For the first time, our model showed a flow reversal in the sheath as an integral part of the origin of the stone transportation during vacuum cleaner effect. The application of Bernoulli's equation provided the explanation of these effects and confirmed our experimental results. We widen the understanding of PCNL with a conclusive physical model, which explains fluid mechanics of the vacuum cleaner effect.

  18. CASE STUDY: Nepal — A cleaner city and better health in Kathmandu

    International Development Research Centre (IDRC) Digital Library (Canada)

    2003-04-07

    Apr 7, 2003 ... CASE STUDY: Nepal — A cleaner city and better health in Kathmandu .... Dr Joshi believes that blending science and a recognition of the social ... One example of where AMESH was applied was in analyzing why the ward ...

  19. Visibility and Social Recognition as Psychosocial Work Environment Factors among Cleaners in A Multi-Ethnic Workplace Intervention

    OpenAIRE

    Hviid, Kirsten; Smith, Louise Hardman; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2012-01-01

    This article focuses on the psychosocial work environment of immigrant cleaners at a Danish workplace. Today, many cleaners working in Danish cleaning jobs are women from the established immigrant communities, but also labour migrants from the newer EU member states have found their way to the cleaning industry. Studies have drawn attention to immigrants low position in the cleaning industry and their increased risk of work injuries. This article is based on a case study of an intervention ca...

  20. Incorporation of occupational health and safety in cleaner production projects in South Africa

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    2002-01-01

    The purpose of this research is to reveal ways in which occupational health and safety can be integrated in environmental cleaner production projects. Of particular interest are those cleaner production projects that are run by the Danish government's environmental assistance agency, Danced......, in South Africa.The study explores two main avenues of integration. First, integrating through better planning, focussing at the tools and procedures in use by Danced for project management -- integrating occupational health and safety into the project specification, so to speak.Second, integrating...... occupational health and safety into the environmental activities that take place at company level. Two ways of doing so are explored, the main distinction being company size. For large companies, integration of management systems may be attractive. For small companies, integration into a less formal network...

  1. Upper-limit on the Advanced Virgo output mode cleaner cavity length noise

    Science.gov (United States)

    Bonnand, R.; Ducrot, M.; Gouaty, R.; Marion, F.; Masserot, A.; Mours, B.; Pacaud, E.; Rolland, L.; Was, M.

    2017-09-01

    The Advanced Virgo detector uses two monolithic optical cavities at its output port to suppress higher order modes and radio frequency sidebands from the carrier light used for gravitational wave detection. These two cavities in series form the output mode cleaner. We present a measured upper limit on the length noise of these cavities that is consistent with the thermo-refractive noise prediction of 8×10-16~m~Hz-1/2 at 15 Hz. The cavity length is controlled using Peltier cells and piezo-electric actuators to maintain resonance on the incoming light. A length lock precision of 3.5×10-13 m is achieved. These two results are combined to demonstrate that the broadband length noise of the output mode cleaner in the 10-60 Hz band is at least a factor 10 below other expected noise sources in the Advanced Virgo detector design configuration.

  2. Using Pipe Cleaners to Bring the Tree of Life to Life

    Science.gov (United States)

    Halverson, Kristy L.

    2010-01-01

    Phylogenetic trees, such as the "Tree of Life," are commonly found in biology textbooks and are often used in teaching. Because students often struggle to understand these diagrams, I developed a simple, inexpensive classroom model. Made of pipe cleaners, it is easily manipulated to rotate branches, compare topologies, map complete lineages,…

  3. Cleaner production analysis in a company of the red ceramic segment

    Directory of Open Access Journals (Sweden)

    Dayanna dos Santos Costa Maciel

    2013-11-01

    Full Text Available The present study had as objective to analyze the productive process of a red ceramic segment industry in relation to the Cleaner Production (CP, based on the theoretical model proposed by National Center of Clean Technologies (CTNL, 2003b. As for the methodology, is classified as exploratory and descriptive, using the case study method. For this purpose, data was collected primary and secondary, the primers were obtained through semi-structured interviews with the owner and manager of production and a questionnaire administered to the owner. As for the secondary data, they were obtained through the company's environmental license, reports, documents, audits, standards and web searches, among others. As results were found in a waste around 10% of manufactured products (bricks, tiles and blocks;  Emission of pollutants such as ash and gases (CO2; High consumption of natural resources such as clay, water, electricity and firewood. This situation is being modified in the function of actions which are taken to obtain a cleaner production.

  4. Risk assessment of amorphous silicon dioxide nanoparticles in a glass cleaner formulation

    Science.gov (United States)

    Scheel, Julia; Karsten, Stefan; Stelter, Norbert; Wind, Thorsten

    2013-01-01

    Since nanomaterials are a heterogeneous group of substances used in various applications, risk assessment needs to be done on a case-by-case basis. Here the authors assess the risk (hazard and exposure) of a glass cleaner with synthetic amorphous silicon dioxide (SAS) nanoparticles during production and consumer use (spray application). As the colloidal material used is similar to previously investigated SAS, the hazard profile was considered to be comparable. Overall, SAS has a low toxicity. Worker exposure was analysed to be well controlled. The particle size distribution indicated that the aerosol droplets were in a size range not expected to reach the alveoli. Predictive modelling was used to approximate external exposure concentrations. Consumer and environmental exposure were estimated conservatively and were not of concern. It was concluded based on the available weight-of-evidence that the production and application of the glass cleaner is safe for humans and the environment under intended use conditions. PMID:22548260

  5. Level of self-reported neck/shoulder pain and biomechanical workload in cleaners

    DEFF Research Database (Denmark)

    Madeleine, Pascal; Søgaard, Karen; Holtermann, Andreas

    2012-01-01

    The aim of the present study was to investigate the relation between self-reported pain, muscular activity and postural load during cleaning tasks. Eighteen cleaners performed usual cleaning tasks in both a laboratory and a lecture room. The level of perceived pain in the neck-shoulder region......-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes during cleaning tasks. The 10th, 50th and 90th percentiles of the angular distributions were computed to characterize postures and movements. Pain tended to play a significant role on RMS of left/right trapezius and left...... erector spinae muscles (P≤0.08). Cleaners with low pain level exhibited higher muscular activity during cleaning. Pain played or tended to play a significant role on PE of left and right erector spinae muscles (P≤0.08). Pain played a significant role on the 10th, 50th and 90th percentile (P...

  6. Cleaner Coal in China [Chinese Version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s rapid economic growth has aroused intense interest around the world. Policy makers, industrialists, investors, environmentalists, researchers and others want to better understand the issues that this populous nation faces as it further develops an already thriving economy largely fuelled by coal. This study sheds light on the Chinese coal supply and transformation sectors. China’s coal, mined locally and available at a relatively low cost, has brought enormous benefits to energy consumers in China and to those outside the country who enjoy the products of its coal-based economy. Yet from another perspective, China’s coal use has a high cost. Despite progress, health and safety in the thousands of small coal mines lag far behind the standards achieved in China’s modern, large mines. Environmental degradation is a real and pressing problem at all stages of coal production, supply and use. Adding to these burdens, emissions of carbon dioxide are of concern to the Chinese government as it embarks on its own climate protection strategy. Technology solutions are already transforming the way coal is used in China and elsewhere. This study explores the context in which the development and deployment of these technologies can be accelerated. Providing a large amount of new data, it describes in detail the situation in China as well as the experiences of other countries in making coal cleaner. Above all, the report calls for much greater levels of collaboration – existing bi-lateral and multi-lateral co-operation with China on coal is found lacking. China’s growing openness

  7. Energy access and transition to cleaner cooking fuels and technologies in Sri Lanka: Issues and policy limitations

    International Nuclear Information System (INIS)

    Wickramasinghe, Anoja

    2011-01-01

    Easy energy access is a trigger for human, social, and economic development. A research project was undertaken in Sri Lanka to broaden the understanding of human dimension of energy access and technologies. A questionnaire survey, covering 2269 households, gathered data on socio-economic contexts and issues influencing a transition towards clean cooking facilities. The findings reveal that the transition is impeded by four factors: the lack of motivation and the pressure for switching over to cleaner facilities, the lack of modern energy technology options, the financial risks, and the lack of financing and other support. The paper describes the delicate two-way interrelation between women earning wages and the transitions to cleaner cooking fuels and technologies. The findings suggest the need for a policy framework involving the stakeholders, financing and standardised technologies. To make a change it is proposed to introduce a national, integrated policy incorporating financing and energy governance. - Highlights: ► Households in Sri Lanka lack access to modern energy technology options for cooking. ► Cooking with fuel wood and residues is the norm in Sri Lanka, particularly in rural households. ► A survey of rural households revealed that most cannot afford to switch to cleaner cooking options. ► Most households have little awareness of the health impacts of biomass cooking. ► Women in regular formal employment are more likely to value cleaner cooking options that save time.

  8. The effects of crude oil and the effectiveness of cleaner application following oiling on US Gulf of Mexico coastal marsh plants.

    Science.gov (United States)

    Pezeshki, S R; DeLaune, R D; Jugsujinda, A

    2001-01-01

    Field studies were conducted in two different marsh habitats in Louisiana coastal wetlands to evaluate the effects of oiling (using South Louisiana Crude oil, SLC) and the effectiveness of a shoreline cleaner (COREXIT 9580) in removing oil from plant canopies. The study sites represented two major marsh habitats; the brackish marsh site was covered by Spartina patens and the freshwater marsh was covered by Sagittaria lancifolia. Field studies were conducted in each habitat using replicated 5.8 m2 plots that were subjected to three treatments; oiled only, oiled + cleaner (cleaner was used 2 days after oiling), and a control. Plant gas exchange responses, survival, growth, and biomass accumulation were measured. Results indicated that oiling led to rapid reductions in leaf gas exchange rates in both species. However, both species in 'oiled + cleaned' plots displayed improved leaf conductance and CO2 fixation rates. Twelve weeks after treatment initiation, photosynthetic carbon fixation in both species had recovered to normal levels. Over the short-term, S. patens showed more sensitivity to oiling with SLC than S. lancifolia as was evident from the data of the number of live shoots and above-ground biomass. Above-ground biomass remained significantly lower than control in S. patens under 'oiled' and 'oiled + cleaned' treatments while it was comparable to controls in S. lancifolia. These studies indicated that the cleaner removed oil from marsh grasses and alleviated the short-term impact of oil on gas exchange function of the study plants. However, use of cleaner had no detectable effects on above-ground biomass production or regeneration at the end of the first growing season in S. patens. Similarly, no beneficial effects of cleaner on carbon fixation and number of live shoots were apparent beyond 12 weeks in S. lancifolia.

  9. Effects of 12 months aerobic exercise intervention on work ability, need for recovery, productivity and rating of exertion among cleaners

    DEFF Research Database (Denmark)

    Lidegaard, Mark; Søgaard, Karen; Krustrup, Peter

    2018-01-01

    PURPOSE: This study assessed the effects of a worksite aerobic exercise intervention among cleaners on: work ability, need for recovery, productivity, and rating of exertion. METHODS: In a monocentric randomised controlled trial in Denmark, 116, of 250 invited, cleaners were cluster-randomised (w......PURPOSE: This study assessed the effects of a worksite aerobic exercise intervention among cleaners on: work ability, need for recovery, productivity, and rating of exertion. METHODS: In a monocentric randomised controlled trial in Denmark, 116, of 250 invited, cleaners were cluster......-randomised (work location; sex; age; length of service) to aerobic exercise [N = 57, 44.9 years, 75.4% female, body mass index (BMI) 26.2], receiving 2 weekly aerobic exercise sessions during 12 months, or a reference group (N = 59, 45.7 years, 76.3% female, BMI 27.1), receiving health-promoting lectures. Self.......2) in the aerobic exercise group compared to the reference group. Productivity and rating of exertion were unaltered. Analysis stratified on age showed significant effects only among the participants aged ≤ 45 years. CONCLUSIONS: After 12 months work ability improved and need for recovery decreased. A period of 4...

  10. Cleaner Technology in the Hard Disk Drive Manufacturing Industry: A Case Study

    Science.gov (United States)

    Moolla, Premchai; Chompu-inwai, Rungchat

    2010-10-01

    The objectives of this research are to improve raw material and energy consumption efficiency, as well as reduce defects and the use of chemicals in the arm coil assembly process of hard disk drive manufacturing in the case study company by applying the Cleaner Technology concepts. The four main sequential steps used in this research were: (1) pre-assessment, (2) assessment, (3) feasibility study, and (4) implementation. In the first step, raw data, such as process flows, raw material usage and defects data were collected. In the second step, the loss during production and causes of loss were analyzed. Opportunities to reduce raw material, chemical and energy wastage could then be recommended. The next step was to evaluate the feasibility and potential benefits of a particular Cleaner Technology opportunity. Finally, in the last step, after a thorough evaluation and implementation of the opportunities to apply Cleaner Technology, the results showed that arm coil defects could be reduced by improving the production process using the ECRS technique. ECRS stands for Eliminate, Combine, Rearrange and Simplify. This improvement reduced arm coil defect rates from 0.48% to 0.15%, thus saving approximately 139,638 Thai Baht per month. In addition, production stoppage decision made by workers was used to increase employee involvement in defect detection. Allowing workers to participate in such a decision was an effective way to reduce defect rate and could motivate workers to produce a better quality job. This resulted in arm coil defects reducing from 0.41% to 0.025%, with about 74,562 Thai Baht per month saving. Additionally, an increase in the efficiency of electricity consumption occurred, by increasing the speed of the infrared oven conveyor belt, improving average productivity from 533 pieces/hour to 560 pieces/hour, without adversely affecting product costs and quality, thus producing products of up to the value of 206,242 Thai Baht per month. Furthermore, the new

  11. Measurement of flow inside a vacuum cleaner head

    Science.gov (United States)

    Iguchi, Ryotaro; Ban, Hisataka; Sakakibara, Jun

    2017-11-01

    Vacuum cleaner head with rotating brushes is widely used as a home appliance. Although it efficiently collects dusts from the floor, flow field of the air and motion of the dust inside the head have not been fully investigated. In this study, we performed 3D-PIV (particle tracking velocimetry) measurement of velocity field inside the head. Water was used as working fluid, which allows a use of fluorescent particle to reduce unwanted reflection from the brushes and inner surface of the head. Mean velocity field and turbulence statistics in the head with and without the brush will be presented.

  12. Sudden death involving inhalation of 1,1-difluoroethane (HFC-152a) with spray cleaner: three case reports.

    Science.gov (United States)

    Sakai, Kentaro; Maruyama-Maebashi, Kyoko; Takatsu, Akihiro; Fukui, Kenji; Nagai, Tomonori; Aoyagi, Miwako; Ochiai, Eriko; Iwadate, Kimiharu

    2011-03-20

    Spray cleaner is a cleaning product containing compressed 1,1-difluoroethane (HFC-152a) to blow dust off electric devices and other sensitive equipment; however, it is also inhaled to induce euphoria. This report describes three cases of death involving HFC-152a inhalation with spray cleaner under different circumstances. In case 1, death was during inhalation for euphoria with which led to having frostbite. In case 2, death may have been associated with suicidal intention. Case 3 was also considered an accidental autoerotic death. In all three cases, HFC-152a was detected at 99.2-136.2mg/l in blood samples, 94.5-191.9 mg/l in urine samples and 3.6-18.4 mg in the gastric contents according to gas chromatography with flame ionization detection. To prevent death associated with HFC-152a inhalation from spray cleaner, the danger of the sudden death should be announced to people, given the ready availability of commercial products containing HFC-152a. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  13. Evaluating The Operation Of Three Air Cleaners Working Individually In A Clean Room

    DEFF Research Database (Denmark)

    Ardkapan, Siamak Rahimi; Afshari, Alireza; Bergsøe, Niels Christian

    2011-01-01

    The use of portable air cleaners is becoming increasingly popular in many countries including Denmark. Portable air cleaners are known for not only removing but also generating particles and gases. To clarify this, three air cleaning technologies were evaluated. They were nonthermal plasma......, photochemical air purifier and corona discharge ionizer. The concentrations of ultrafine particles, ozone and total volatile organic compounds were measured both in a duct and in a clean room. It was found that the studied air cleaning technologies increased the ozone level in the clean room and the duct....... The increase of ozone level in the clean room was more than that was measured in the duct. Additionally, it was found that the number of ultrafine particles in the room increased due to the generated ozone. The number of generated particles changed with the season. The study leads to the recommendation...

  14. Analysis of the potentiality for implementing of the cleaner production and adopting a sustainable consumption in the Cuban entrepreneurial system

    International Nuclear Information System (INIS)

    Tortosa Ferrer, Barbara Ivette; Orue Valdes, Sonia; Mena Ulecia, Karel

    2007-01-01

    The world economic development has conduced to increase the worsening of the environment as result of the natural resources pollution. The tendency has been toward the unsustainable exploitation of natural resources, to increasing of the goods and services production, as well as, to elevated consumption. In this sense, many countries have planed environmental policies addressed to reducing of pollution introducing cleaner production practices and promoting the adoption of responsible consumption. This article shows the existing potentiality in a selected Cuban companies group for introducing and applying of the cleaner production, as well as, the adoption of a sustainable consumption start from analysis of the obtained results in short-term assessments (quick scans) carried out by the Cuban Environment Agency Focal Point of the National Cleaner Production Network in the period between 2004 and 2007

  15. Aeroacoustic characteristics and noise reduction of a centrifugal fan for a vacuum cleaner

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Wan Ho; Rew, Ho Seon; Kim, Chang Joon [LG Electronics, Seoul (Korea, Republic of)

    2004-02-01

    The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall Sound Power Level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental Blade Passing Frequency (BPF) is reduced by about 6 dB(A) and the 2{sup nd} BPF is reduced about 20 dB(A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced.

  16. Aeroacoustic characteristics and noise reduction of a centrifugal fan for a vacuum cleaner

    International Nuclear Information System (INIS)

    Jeon, Wan Ho; Rew, Ho Seon; Kim, Chang Joon

    2004-01-01

    The aeroacoustic characteristics of a centrifugal fan for a vacuum cleaner and its noise reduction method are studied in this paper. The major noise source of a vacuum cleaner is the centrifugal fan. The impeller of the fan rotates at over 30000 rpm, and generates very high-level noise. It was revealed that the dominant noise source is the aerodynamic interaction between the rotating impeller and stationary diffuser. The directivity of acoustic pressure showed that most of the noise propagates backward direction of the fan-motor assembly. In order to reduce the high tonal sound generated from the aerodynamic interaction, unevenly pitched impeller and diffuser, and tapered impeller designs were proposed and experiments were performed. Uneven pitch design of the impeller changes the sound quality while the overall Sound Power Level (SPL) and the performance remains similar. The effect of the tapered design of impeller was evaluated. The trailing edge of the tapered fan is inclined. This reduces the flow interaction between the rotating impeller and the stationary diffuser because of some phase shifts. The static efficiency of the new impeller design is slightly lower than the previous design. However, the overall SPL is reduced by about 4 dB(A). The SPL of the fundamental Blade Passing Frequency (BPF) is reduced by about 6 dB(A) and the 2 nd BPF is reduced about 20 dB(A). The vacuum cleaner with the tapered impeller design produces lower noise level than the previous one, and the strong tonal sound was dramatically reduced

  17. Thermal neutron calibration of a tritium extraction facility using the 6Li(n,t)4He/197Au(n,γ)198Au cross section ratio for standardization

    International Nuclear Information System (INIS)

    Bretscher, M.M.; Smith, D.L.

    1980-08-01

    Absolute tritium activities in a neutron-activated metallic lithium samples have been measured by liquid scintillation methods to provide data needed for the determination of capture-to-fission ratios in fast breeder reactor spectra and for recent measurements of the 7 Li(n,n't) 4 He cross section. The tritium extraction facility used for all these experiments has now been calibrated by measuring the 6 Li(n,t) 4 He/ 197 Au/n,γ) 198 Au activity ratio for thermal neutrons and comparing the result with the well-known cross sections. The calculated-to-measured activity ratio was found to be 1.033 +- 0.018. 2 figures, 20 tables

  18. Too tired for exercise? The work and leisure of female cleaners in Denmark

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2017-01-01

    on the relevant literature on women’s work–life balance and (migrant) women’s participation in LTPA, we approached their work and leisure from an intersectionality perspective and explored if and how female cleaners engaged in LTPA and which constraints impeded their involvement. The interviewees’ narratives...

  19. Workshop on Indian Chemical Industry: perspectives on safety, cleaner production and environment production

    NARCIS (Netherlands)

    Ham, J.M.

    1996-01-01

    A Workshop on "Indian Chemical Industry: Perspectives on Safety, Cleaner Production and Environmental Protection" was held on 3, 4 and 5 January 1996, in Bombay, India. The main objective of the workshop, which was organised jointly by the Government of India, UNIDO/UNDP and the Indian Chemical

  20. Playing after work? Opportunities and challenges of a physical activity programme for female cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2016-01-01

    The workplace is regarded as an ideal setting for health promotion, not least because large sections of the population, including “high risk groups”, can be reached. One group which is reportedly in great demand of health promotion is that of female (migrant) cleaners – the participants in our...... factors constrained and which supported participation. The interviews revealed a high degree of appreciation for the training but also pointed to a number of constraints which were embedded into the participants’ biographies and everyday lives as migrant cleaners in Denmark. Most women had no previous...... experience with sport and exercise and struggled with the high demands at work and a “second shift” at home. As a consequence, most participants found the training too time- and energy-consuming. We conclude that exercise programmes should preferably be conducted at the workplace and during working hours....

  1. Internationalisierung des Lehramts – eine Quadratur des Kreises? Zu Chancen und Grenzen eines grenzüberschreitenden Paradigmas der Lehrerbildung am Beispiel des Masterstudiengangs MEEF / LINT (Lehramt International Nizza-Regensburg

    Directory of Open Access Journals (Sweden)

    Jochen Mecke

    2016-03-01

    Full Text Available Die Internationalisierung ist nicht das Problem, sie ist die Lösung: In einer europäischen Gesellschaft, in der die Dynamik einer neuen Vielfalt derzeit eine der wenigen Konstanten darstellt, die nationenübergreifend Bestand hat und keine Grenzen kennt, brauchen wir eine Lehrerbildung, die strukturell und konzeptionell so gesamteuropäisch angelegt ist wie ihre Herausforderungen. Wir brauchen trotz und wegen verschiedener bildungspolitischer Unterschiede und Hürden neue Ansätze der Kooperation und Vernetzung, deren Chancen und Herausforderungen in der Folge exemplarisch am binationalen Master of Education MEEF / LINT (Lehramt International Deutsch-Französisch skizziert werden sollen.

  2. Transition to an intelligent use of cleaner biomass stoves

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Vicent, Estela D.

    2016-01-01

    are relevant issues to save energy and avoid greenhouse gas (CO2e) emissions. This work compares the operating performance of 3 types of biomass stoves used in Europe in their interaction with dwellings. Field studies were conducted in 24 houses in Portugal and Denmark to analyse wood-burning behaviours......In Europe, inappropriate user behaviours in the operation of wood-burning stoves (WBSs) results in substantial energy losses where fireplaces and conventional stoves are major contributors to undue emissions of health damaging fine particulate matter (PM2.5). The design and adoption of cleaner WBSs...

  3. Field evaluation and health assessment of air cleaners in removing radon decay products in domestic environments

    International Nuclear Information System (INIS)

    Li, Chih-Shan.

    1990-01-01

    In this study, field evaluations of two types of air cleaners were conducted in three single-family houses. The measurements included radon concentration, particle number concentration, and concentration and size distribution of radon decay products. The influence on the behavior of radon decay products by various indoor particles both with and without the air cleaning systems was investigated. A room model was used to calculate the changes in the aerosol parameters caused by the operation of the air cleaners. Using the James dosimetric models (1989 and 1990), the changes in the hourly bronchial dose rate per Bq m -3 radon for men, women, and children can be estimated for various domestic environments. 94 refs., 60 figs., 28 tabs

  4. Acute effect on ambulatory blood pressure from aerobic exercise: a randomised cross-over study among female cleaners.

    Science.gov (United States)

    Lund Rasmussen, Charlotte; Nielsen, Line; Linander Henriksen, Marie; Søgaard, Karen; Krustrup, Peter; Holtermann, Andreas; Korshøj, Mette

    2018-02-01

    High occupational physical activity (OPA) is shown to increase the risk for elevated blood pressure, cardiovascular diseases and mortality. Conversely, aerobic exercise acutely lowers the blood pressure up to 25 h post exercise. However, it is unknown if this beneficial effect also apply for workers exposed to high levels of OPA. Cleaners constitute a relevant occupational group for this investigation because of a high prevalence of OPA and cardiovascular disease. Accordingly, the objective was to investigate the acute effects on ambulatory blood pressure from a single aerobic exercise session among female cleaners. Twenty-two female cleaners were randomised to a cross-over study with a reference and an aerobic exercise session. Differences in 24-h, work hours, leisure time, and sleep ambulatory blood pressure (ABP) were evaluated using repeated measure 2 × 2 mixed-models. After the aerobic exercise session, the 24-h systolic ambulatory blood pressure was significantly lowered by 2.4 mmHg (p ABP was unaltered. During work hours, a lowered systolic ABP of 2.2 mmHg (p = 0.02) and a higher diastolic ABP of 1.5 mmHg (p = 0.03) were found after the aerobic exercise session. During leisure time, the systolic ABP was lowered by 1.7 mmHg (p = 0.04) and the diastolic ABP was unaltered. During sleep, the systolic and diastolic ABP was unaltered. A single aerobic exercise session lowered 24-h systolic ABP of 2.4 mmHg. Thus, an aerobic exercise session seems to be beneficial for lowering the risk of hypertension among cleaners.

  5. Applying real options analysis to assess cleaner energy development strategies

    International Nuclear Information System (INIS)

    Cheng, Ching-Tsung; Lo, Shang-Lien; Lin, Tyrone T.

    2011-01-01

    The energy industry, accounts for the largest portion of CO 2 emissions, is facing the issue of compliance with the national clean energy policy. The methodology for evaluating the energy mix policy is crucial because of the characteristics of lead time embedded with the power generation facilities investment and the uncertainty of future electricity demand. In this paper, a modified binomial model based on sequential compound options, which may account for the lead time and uncertainty as a whole is established, and a numerical example on evaluating the optional strategies and the strategic value of the cleaner energy policy is also presented. It is found that the optimal decision at some nodes in the binomial tree is path dependent, which is different from the standard sequential compound option model with lead time or time lag concept. The proposed modified binomial sequential compound real options model can be generalized and extensively applied to solve the general decision problems that deal with the long lead time of many government policies as well as capital intensive investments. - Highlights: → Introducing a flexible strategic management approach for government policy making. → Developing a modified binomial real options model based on sequential compound options. → Proposing an innovative model for managing the long term policy with lead time. → Applying to evaluate the options of various scenarios of cleaner energy strategies.

  6. Taxation on vehicle fuels: its impacts on switching to cleaner fuels

    International Nuclear Information System (INIS)

    Hung, W.-T.

    2006-01-01

    Vehicular consumption of fossil fuel contributes over 90% of air pollution in Hong Kong. A key strategy to improve Hong Kong's air quality is to discourage dirty fuels (e.g., leaded petrol and high-sulphur diesel) and to promote the use of clean fuels (e.g., low-sulphur diesel and liquefied petroleum gas (LPG)). This paper presents the empirical evidence on the effectiveness of the Government's clean fuel programs that offer tax subsidy to lower the consumption cost of such fuels. For the cases of unleaded petrol and ultra-low-sulphur diesel, lower fuel duties were offered so that the prices of these fuels were below those of leaded petrol and conventional diesel. Conventional petrol and diesel were phased out. In order to decide on the level of fuel duty concessions required to introduce LPG for taxis and bio-diesel for other vehicles, various Government-run trial programs were introduced to obtain cost estimates of using these alternative cleaner fuels. LPG using vehicles were subsequently exempted from the fuel duty in order to attract taxi and light bus operators to switch to LPG. It is apparent that the higher the subsidy, the faster is the rate at which switching to cleaner fuels takes place

  7. Water resources protection today: end-of-pipe technology and cleaner production. Case study of the Czech Odra River watershed.

    Science.gov (United States)

    Chour, V

    2001-01-01

    This paper reports on integrated watershed-based protection and sustainable use of water resources to increase the effectiveness of water pollution abatement. The approach includes improvements in end-of-pipe waste-water treatment technologies and implementation of Cleaner Production (CP) principles and policies within the watershed. An example of the general effectiveness of this approach is illustrated by the Czech Odra River Cleaner Production Project where reductions in pollution were achieved with improved industrial production. The CP theme is worth considering as an important challenge for the IWA.

  8. What drives successful implementation of pollution prevention and cleaner technology strategy? The role of innovative capability.

    Science.gov (United States)

    Bhupendra, Kumar Verma; Sangle, Shirish

    2015-05-15

    Firms that are dynamic and prepared to implement environmental strategies have a potential competitive advantage over their industry counterparts. Therefore, it is important to understand, what capabilities are required to implement proactive environmental strategies. The paper discusses the attributes of innovative capability required by firms in order to adopt pollution prevention and cleaner technology strategies. Empirical results show that process and behavioral innovativeness are required by firms to implement a pollution prevention strategy. In addition to process and behavioral innovativeness, firms need a top management with high risk-taking ability as well as market, product, and strategic innovativeness to implement a cleaner technology strategy. The paper proposes some important managerial implications on the basis of the above research findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. China and Cleaner Coal. A marriage of necessity destined for failure?

    International Nuclear Information System (INIS)

    Seaman, John

    2012-04-01

    For China, coal is a crucial source of abundant, indigenous and affordable energy and is a pillar of economic and social stability. From a logic of energy security, and because the industry itself maintains a formidable political presence through the sheer fact of its history and size, this resource will continue to play a central role in the country's energy mix. But in order to respond to the growing need to reduce the burden of coal use on the environment and the Chinese population, and to prevent catastrophic climate change, both Chinese leaders and the industry itself have faced a certain reality - coal must become cleaner. This has led to a tenuous compromise between those in China advocating for the use of coal as a matter of economic necessity and social stability (security of supply, reliable and cheap electricity, and indigenous energy technologies) and those who strive for more environmentally sustainable growth (and thus emphasize 'clean' coal). The convergence of these two concepts has spurred a major shift towards newer, more efficient, though still highly polluting technologies - notably larger scale, hotter burning supercritical and ultra-supercritical coal-fired plants. But it has also spawned a number of demonstration-scale projects in various cutting-edge technologies to include coal gasification and carbon capture and storage (CCS), which promise vast improvements in CO_2 and other, toxic emissions if widely adopted. Indeed, mitigating climate change while continuing to rely heavily on coal will only be possible if carbon can successfully be captured and stored on a broad scale. The push to develop new coal technologies opens doors for both foreign and Chinese businesses to work together, potentially creating new market opportunities at home and abroad. Chinese companies can receive much-needed capital and expertise, while foreign companies and researchers are given the chance to test and develop technologies at a level of speed and scale that

  10. Cleaner drive - Obstacles in the way of a market for a new generation of vehicles; Cleaner Drive. Hindernisse fuer die Markteinfuehrung von neuen Fahrzeug-Generationen. Bericht ueber die Beteiligung von e'mobile am EU-Projekt

    Energy Technology Data Exchange (ETDEWEB)

    Schwegler, U. [e' mobile, der Schweizerische Verband fuer elektrische und effiziente Strassenfahrzeuge, Berne (Switzerland); Domeniconi, R. [AssoVEL2, Mendrisio (Switzerland); Kaufmann, J. [Kaufmann Consulting, Berne (Switzerland); Werfeli, A. [Verband der Schweizerischen Gasindustrie, Zuerich (Switzerland)

    2004-07-01

    This final report for the Association of Swiss Traffic Engineers describes work done within the framework of the fifth European Research Framework Programme involving the development of tools to speed up the introduction of a new generations of vehicles. This report lists the work done by the Swiss e'mobil organisation and discusses the limitations placed on the work by its international framework. The report presents the 'Cleaner Drive' environmental evaluation methods used for vehicles. This considers greenhouse-gas emissions and external costs. Factors not considered, noise and bio-fuels, are mentioned. A data-base based decision-support tool is introduced. The development of the 'Cleaner Drive' web site is described. A further chapter takes a look at efforts being made in the area of filling stations for gaseous fuels.

  11. Integrated Hydrologic Science and Environmental Engineering Observatory: CLEANER's Vision for the WATERS Network

    Science.gov (United States)

    Montgomery, J. L.; Minsker, B. S.; Schnoor, J.; Haas, C.; Bonner, J.; Driscoll, C.; Eschenbach, E.; Finholt, T.; Glass, J.; Harmon, T.; Johnson, J.; Krupnik, A.; Reible, D.; Sanderson, A.; Small, M.; van Briesen, J.

    2006-05-01

    With increasing population and urban development, societies grow more and more concerned over balancing the need to maintain adequate water supplies with that of ensuring the quality of surface and groundwater resources. For example, multiple stressors such as overfishing, runoff of nutrients from agricultural fields and confined animal feeding lots, and pathogens in urban stormwater can often overwhelm a single water body. Mitigating just one of these problems often depends on understanding how it relates to others and how stressors can vary in temporal and spatial scales. Researchers are now in a position to answer questions about multiscale, spatiotemporally distributed hydrologic and environmental phenomena through the use of remote and embedded networked sensing technologies. It is now possible for data streaming from sensor networks to be integrated by a rich cyberinfrastructure encompassing the innovative computing, visualization, and information archiving strategies needed to cope with the anticipated onslaught of data, and to turn that data around in the form of real-time water quantity and quality forecasting. Recognizing this potential, NSF awarded $2 million to a coalition of 12 institutions in July 2005 to establish the CLEANER Project Office (Collaborative Large-Scale Engineering Analysis Network for Environmental Research; http://cleaner.ncsa.uiuc.edu). Over the next two years the project office, in coordination with CUAHSI (Consortium of Universities for the Advancement of Hydrologic Science, Inc.; http://www.cuahsi.org), will work together to develop a plan for a WATer and Environmental Research Systems Network (WATERS Network), which is envisioned to be a collaborative scientific exploration and engineering analysis network, using high performance tools and infrastructure, to transform our scientific understanding of how water quantity, quality, and related earth system processes are affected by natural and human-induced changes to the environment

  12. Evaluation of the efficacy of vacuum cleaners for the integrated control of brown spider Loxosceles intermedia

    Directory of Open Access Journals (Sweden)

    E. N. Ramires

    2007-01-01

    Full Text Available Some venomous spiders of the genus Loxosceles can reach high population densities inside and around houses. In Brazil, most spider accidents are related to Loxosceles intermedia. Control of loxoscelism should utilize integrated pest management tools, such as vacuum cleaners, to eliminate egg sacs, webs and spiders. The present study tested the efficacy of one type of vacuum cleaner (for professional and domestic use in the control of L. intermedia populations. Cockroaches (Pycnoscelus surinamensis were used in some tests for comparison. Vacuuming using standard accessories or a paper tube resulted in the death of all female (n=60, male (n=60, young (n=60 and just-hatched (n=60 L. intermedia, and all egg sacs (n=5 were destroyed. The removal of the plastic plate present at the bottom of the vacuuming tube inside the machine allowed some spiders to survive the vacuuming process. When kept inside a vacuum bag full of dust and debris, adult females (n=10 survived for 10 days; however, significant mortality was observed among male (n=10 and young individuals (n=10. Addition of cornstarch to the vacuum bag did not affect the spiders (n=20. Vacuum cleaners, such as the one used in the present investigation, are promising tools for integrated management of L. intermedia and other spiders in domestic environments.

  13. IMPACT OF COSOLVENT FLUSHING ON SUBSURFACE MICROBIAL ECOLOGY AT THE FORMER SAGE'S DRY CLEANER SITE

    Science.gov (United States)

    The Solvent Extraction Residual Biotreatment (SERB) technology was evaluated at the former Sage's Dry Cleaner site in Jacksonville, FL where an area of tetrachloroethylene (PCE) contamination was identified. The SERB technology is a treatment train approach to complete site rest...

  14. The Infraordinary as Spatial Discourse: Tongue of the Dry Cleaner

    DEFF Research Database (Denmark)

    Lunde Nielsen, Espen

    2014-01-01

    Most of us pass along kiosks, pubs, dry cleaners, turn street corners, rise up stairways on a daily basis, in a sort of spatial anaesthesia. These spaces that facilitates our everyday existence are ‘worn half-invisible by use’, thereby not given due attention. Through his occupation with the infra...... and people of the neighbourhood coexist through events in real-time and depositions over time. The infra-ordinary as a spatial discourse interrogates and acknowledges the latent qualities of the common and seemingly banal, yet vitally important, spatial materiality of everyday life, as an alternative...

  15. General wisdom concerning the factors affecting the adoption of cleaner technologies: a survey 1990-2007

    NARCIS (Netherlands)

    Montalvo Corral, C.

    2008-01-01

    Cleaner technologies (CT) have recently received much attention in diverse media and policy agendas. This comes out of the clear role they play in environmental protection and sustainability and the large potential to contribute to economic growth and competitiveness. The realization of both

  16. Reactive adsorption: A cleaner technology in nuclear power plants

    International Nuclear Information System (INIS)

    Marton, G.; Szanya, T.; Hanak, L.

    1996-01-01

    Cleaner technology prefers work with minimal loss and the wastes cause the less environmental damages. In the spirit of the previous sentence in the present paper reactive adsorption is investigated for the removal of radioactive nuclides from nuclear power plant decontamination solutions. During alkaline, oxidative decontamination of nuclear power plant equipment a radioactive solution is produced. Owing to the storing difficulties of radioactive solutions it is necessary to develop a method for the in situ treatment of radioactive, alkaline, oxidative decontamination solutions, and for the concentration of radioactive components. Reactive adsorption seems to be promising for this purpose. 3 refs., 8 figs., 1 tab

  17. Equal-sign lepton pairs: a cleaner W-signal in panti p collisions

    International Nuclear Information System (INIS)

    Abud, M.; Gatto, R.; Savoy, C.A.

    1978-01-01

    It is pointed out that the observation of the energetic equal-sign dileptons in high-energy panti p colliding beams may provide for a cleaner way of detecting the W. It is assumed that the most energetic dileptons come from the semileptonic decays of the t- and b-quarks. The authors calculate the dilepton signal from weak interaction and compare it with the strong interaction background as predicted by QCD. (Auth.)

  18. The performance of cleaner wrasse, Labroides dimidiatus, in a reversal learning task varies across experimental paradigms.

    Science.gov (United States)

    Gingins, Simon; Marcadier, Fanny; Wismer, Sharon; Krattinger, Océane; Quattrini, Fausto; Bshary, Redouan; Binning, Sandra A

    2018-01-01

    Testing performance in controlled laboratory experiments is a powerful tool for understanding the extent and evolution of cognitive abilities in non-human animals. However, cognitive testing is prone to a number of potential biases, which, if unnoticed or unaccounted for, may affect the conclusions drawn. We examined whether slight modifications to the experimental procedure and apparatus used in a spatial task and reversal learning task affected performance outcomes in the bluestreak cleaner wrasse, Labroides dimidiatus (hereafter "cleaners"). Using two-alternative forced-choice tests, fish had to learn to associate a food reward with a side (left or right) in their holding aquarium. Individuals were tested in one of four experimental treatments that differed slightly in procedure and/or physical set-up. Cleaners from all four treatment groups were equally able to solve the initial spatial task. However, groups differed in their ability to solve the reversal learning task: no individuals solved the reversal task when tested in small tanks with a transparent partition separating the two options, whereas over 50% of individuals solved the task when performed in a larger tank, or with an opaque partition. These results clearly show that seemingly insignificant details to the experimental set-up matter when testing performance in a spatial task and might significantly influence the outcome of experiments. These results echo previous calls for researchers to exercise caution when designing methodologies for cognition tasks to avoid misinterpretations.

  19. Effort-reward imbalance at work and self-rated health of Las Vegas hotel room cleaners.

    Science.gov (United States)

    Krause, Niklas; Rugulies, Reiner; Maslach, Christina

    2010-04-01

    This study investigates the relationship between effort-reward-imbalance (ERI) at work and self-rated health (SF-36) among 941 Las Vegas hotel room cleaners (99% female, 84% immigrant). Logistic regression models adjust for age, health behaviors, physical workload and other potential confounders. 50% reported ERI and 60% poor or fair general health. Significant associations were found between ERI and all SF-36 health measures. Workers in the upper quartile of the efforts/rewards ratio were 2-5 times more likely to experience poor or fair general health, low physical function, high levels of pain, fatigue, and role limitations due to physical and mental health problems. The cross-sectional design limits causal interpretation of these associations. However, the development of interventions to reduce ERI and to improve general health among room cleaners deserves high priority considering that both high ERI and low self-rated health have predicted chronic diseases and mortality in prospective studies. (c) 2009 Wiley-Liss, Inc.

  20. Strategies to overcome barriers for cleaner generation technologies in small developing power systems: Sri Lanka case study

    International Nuclear Information System (INIS)

    Wijayatunga, Priyantha D.C.; Siriwardena, Kanchana; Fernando, W.J.L.S.; Shrestha, Ram M.; Attalage, Rahula A.

    2006-01-01

    The penetration of cleaner and energy efficient technologies in small power systems such as the one in Sri Lanka has encountered many problems. This has caused major concerns among the policy makers, mainly in the context of the growing need to reduce harmful emissions in the electricity supply industry from the point of view of both local environmental pollution as well as the global warming concerns. This paper presents the outcome of a study involved in identifying and ranking the barriers to the promotion of cleaner and energy efficient technologies and strategies to overcome these barriers in Sri Lanka. Barriers for renewable energy based systems such as wind and wood fuel fired plants (dendro thermal power) and cleaner technologies such as liquefied natural gas (LNG) fired combined cycle and IGCC (coal) were identified based on a survey. A direct assessment multi-criteria decision making method called Analytic Hierarchy Process (AHP) was used to rank the barriers. The most effective strategies are proposed to address the three major barriers for each of these technologies based on extensive discussions with all the stakeholders in the electricity industry. It was found that lack of financing instruments, high initial cost and lack of assurance of resource supply or availability are the main barriers for renewable technologies. As for cleaner fuel and technology options associated with conventional generation systems, the lack of a clear government policy, uncertainty of fuel supplies and their prices and the reliability of the technologies themselves are the major barriers. Strategies are identified to overcome the above barriers. Establishment of a proper feed in tariff, geographical diversification of installations and capacity building in commercial banks are suggested for wind power. Investment incentives, streamlining of wood production and research on site identification are proposed for wood fuel fired plants. Also the study suggests delayed

  1. The importance of integrated system design for the effectiveness of portable air cleaners in airborne infection

    CSIR Research Space (South Africa)

    Van Reenen, T

    2013-12-01

    Full Text Available The results of the recent study into the effectiveness of portable air cleaners (PACs), as an infection control measure against TB, delivered unexpectedly low results. That finding initiated a further study to understand the contribution of system...

  2. Overview of cleaner production as a result of clean technology research in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Sam, D.V.; Nhan, T.V.; Lan, N.N. [Hanoi Univ. of Technology (Viet Nam)

    1996-12-31

    Vietnam is beginning its industrialization process, and it currently lacks the capital necessary for expensive pollution control and treatment systems. Pollution strategies are critical for the country. This study evaluates the present status of industry and the pollution problems associated with industrial development in Vietnam. The purpose of the study is to identify sectors that may have potential for promoting cleaner production practices. 4 refs.

  3. Lipophilic Super-Absorbent Swelling Gels as Cleaners for Use on Weapons Systems and Platforms

    Science.gov (United States)

    2014-02-01

    Tetrahydrofuran (THF), isopropa- nol, acetonitrile, and dichloromethane were obtained from Acros Organics (Morris Plains, NJ). Dimethylsulfoxide ( DMSO ) and 1...1. In the following solvents , swelling degree did not change in both heating and cooling processes: water, DMSO , methanol, ethanol, isopropanol...available alkylstyrene copolymer (imbiber beads). The cleaning ability of the gels was compared with the standard solvent cleaner trichloroethylene

  4. Radiation technology helps China’s industries make water cleaner

    International Nuclear Information System (INIS)

    Jawerth, Nicole

    2015-01-01

    China is pursuing the use of radiation technology as part of its wastewater treatment methods to further efforts to manage industrial waste in an environmentally friendly way. “Treating the water that comes from our industries is very important, so we have been doing this for a long time. Now we want to become better at making our water cleaner,” said Jianlong Wang, Vice-President of the Institute of Nuclear and New Energy Technology (INET) at Tsinghua University in Beijing. “We are receiving a lot of support from the IAEA to use electron beam based technologies to help us get rid of various water pollutants that the other methods cannot do on their own.”

  5. The ecological significance of juvenile Diplodus sargus as ectoparasite fish cleaners in the north-eastern Atlantic

    Directory of Open Access Journals (Sweden)

    José Neto

    2015-11-01

    Full Text Available Cleaning behaviour was recently described for the omnivorous species Diplodus sargus. Although previous studies have reported the existence of ectoparasites in the stomach contents of some individuals this commercially important fish was never considered a cleaner species. Here we make the first characterization of this behaviour based on field observations. This behaviour was exclusively performed by juvenile D. sargus and, until now, was only observed in confined or semi-confined areas such as coastal lagoons or harbours. Unexpectedly, cleaning rates and the number of individuals performing this behaviour largely exceeds the ones described for a sympatric cleaner fish (13.98 cleaning events/individual/hour compared to 5.08 in Centrolabrus exoletus. Clients belong to several fish families (e.g. Mugilidae, Sparidae and Labridae that include some of the most common species in coastal habitats. Frequently, clients request cleaning by tilting their body or remaining motionless near the surface while being cleaned (40% however, in most cases, the interaction ends because clients flee (46%. This could mean that D. sargus is also feeding on mucus and/or living tissue. These shifts between exploitation and cooperation have been frequently described for tropical reef species. Our results support cooperative behaviour, with a clear correlation between the number of nips per cleaning event or the number of nips to which the client reacted positively and cleaning event duration (n=552; Spearman correlation r=0.79, p<0.001; r=0.76, p<0.001, respectively. Furthermore, no correlation was detected between the number of jolts by the client fish and the cleaning event duration (n=552; Spearman correlation r=0.07, p=0.105 meaning that jolting does not increase with increased interaction time. In the future, the evaluation of the ecological importance of D. sargus as a cleaner species in the North-Eastern Atlantic, should proceed with field observations in

  6. Separate and unsanitary: African American women railroad car cleaners and the Women's Service Section, 1918-1920.

    Science.gov (United States)

    Muhammad, Robin Dearmon

    2011-01-01

    The Women's Service Section (WSS) investigated federally controlled railroad stations and yards at the end of World War I. Few women worked in car cleaning before the war, and railroad management preferred to block women workers, especially African Americans, from gaining any kind of foothold in railroad work. African American women were the single largest group of railroad car cleaners during this period but they were routinely denied adequate facilities, including toilets, locker rooms, and dining facilities throughout the railroad system. By raising the issues of facilities, workers' rights, and public health, these women shaped federal policy and widened the agenda of the WSS to include a direct attack on segregated workplaces. This article argues that African American women car cleaners launched an industrial campaign that wove together concerns about racism, sexism, and health issues, and successfully removed barriers to women working in a predominately male industry.

  7. Ocean cleaning stations under a changing climate: biological responses of tropical and temperate fish-cleaner shrimp to global warming.

    Science.gov (United States)

    Rosa, Rui; Lopes, Ana Rita; Pimentel, Marta; Faleiro, Filipa; Baptista, Miguel; Trübenbach, Katja; Narciso, Luis; Dionísio, Gisela; Pegado, Maria Rita; Repolho, Tiago; Calado, Ricardo; Diniz, Mário

    2014-10-01

    Cleaning symbioses play an important role in the health of certain coastal marine communities. These interspecific associations often occur at specific sites (cleaning stations) where a cleaner organism (commonly a fish or shrimp) removes ectoparasites/damaged tissue from a 'client' (a larger cooperating fish). At present, the potential impact of climate change on the fitness of cleaner organisms remains unknown. This study investigated the physiological and biochemical responses of tropical (Lysmata amboinensis) and temperate (L. seticaudata) cleaner shrimp to global warming. Specifically, thermal limits (CTMax), metabolic rates, thermal sensitivity, heat shock response (HSR), lipid peroxidation [malondialdehyde (MDA) concentration], lactate levels, antioxidant (GST, SOD and catalase) and digestive enzyme activities (trypsin and alkaline phosphatase) at current and warming (+3 °C) temperature conditions. In contrast to the temperate species, CTMax values decreased significantly from current (24-27 °C) to warming temperature conditions (30 °C) for the tropical shrimp, where metabolic thermal sensitivity was affected and the HSR was significantly reduced. MDA levels in tropical shrimp increased dramatically, indicating extreme cellular lipid peroxidation, which was not observed in the temperate shrimp. Lactate levels, GST and SOD activities were significantly enhanced within the muscle tissue of the tropical species. Digestive enzyme activities in the hepatopancreas of both species were significantly decreased by warmer temperatures. Our data suggest that the tropical cleaner shrimp will be more vulnerable to global warming than the temperate Lysmata seticaudata; the latter evolved in a relatively unstable environment with seasonal thermal variations that may have conferred greater adaptive plasticity. Thus, tropical cleaning symbioses may be challenged at a greater degree by warming-related anthropogenic forcing, with potential cascading effects on the health

  8. Study on demetalization of sewage sludge by sequential extraction before liquefaction for the production of cleaner bio-oil and bio-char.

    Science.gov (United States)

    Leng, Lijian; Yuan, Xingzhong; Shao, Jianguang; Huang, Huajun; Wang, Hou; Li, Hui; Chen, Xiaohong; Zeng, Guangming

    2016-01-01

    Demetalization of sewage sludge (SS) by sequential extraction before liquefaction was implemented to produce cleaner bio-char and bio-oil. Demetalization steps 1 and 2 did not cause much organic matter loss on SS, and thus the bio-oil and bio-char yields and the compositions of bio-oils were also not affected significantly. However, the demetalization procedures resulted in the production of cleaner bio-chars and bio-oils. The total concentrations and the acid soluble/exchangeable fraction (F1 fraction, the most toxic heavy metal fraction) of heavy metals (Cu, Cr, Pb, Zn, and Cd) in these products were significantly reduced and the environmental risks of these products were also relived considerably compared with those produced from raw SS, respectively. Additionally, these bio-oils had less heavy fractions. Demetalization processes with removal of F1 and F2 fractions of heavy metals would benefit the production of cleaner bio-char and bio-oil by liquefaction of heavy metal abundant biomass like SS. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Cleaner metallurgical industry in Serbia: a road to the sustainable development

    Directory of Open Access Journals (Sweden)

    D. Panias

    2009-01-01

    Full Text Available Since the sustainable development has been a global and fundamental objecttive, a metallurgical industrial sector faces some of the most difficult sustainability challenges of any industrial sector. On the other hand, the metallurgical production in Serbia is a very important part of the economy. Due to present facilities and technologies, metallurgical companies face a great challenge to fulfill the requirements introduced by legislature referring to the cleaner production and sustainable development. The state of art in the production, facilities, pollution with some answers to imposed challenges is presented.

  10. Bacterial and fungal aerosols in the work environment of cleaners

    Directory of Open Access Journals (Sweden)

    Małgorzata Gołofit-Szymczak

    2015-12-01

    Full Text Available Background: Cleaning services are carried out in almost all sectors and branches of industry. Due to the above, cleaners are exposed to various harmful biological agents, depending on the tasks performed and the commercial sector involved. The aim of this study was to assess the exposure of cleaning workers to biological agents based on quantitative and qualitative characteristics of airborne microflora. Material and methods: A six-stage Andersen sampler was used to collect bioaerosols during the cleaning activities in different workplaces, including schools, offices, car services, healthy services and shops. Standard Petri dishes filled with blood trypticase soy agar and malt extract agar were used for bacterial and fungal sampling, respectively. Results: The bioaerosol concentration values obtained during testing of selected workposts of cleaners were lower than the Polish recommended threshold limit values for microorganisms concentrations in public service. The most prevalent bacterial species in studied places were Gram-positive cocci (mainly of genera Micrococcus, Staphylococcus and endospore-forming Gram-positive rods (mainly of genera Bacillus. Among the most common fungal species were those from genera Penicillium and Aspergillus. The size distribution analysis revealed that bioaerosols present in the air of workposts at shops, schools and car services may be responsible for nose and eye mucosa irritation and allergic reactions in the form of asthma or allergic inflammation in the cleaning workers. Conclusions: The study shows that occupational activities of cleaning workers are associated with exposure to airborne biological agents classified into risk groups, 1. and 2., according to their level of infection risk, posing respiratory hazard. Med Pr 2015;66(6:779–791

  11. Cleaner production at pharmaceutical industry: first steps assessment

    Directory of Open Access Journals (Sweden)

    Edilaine Conceição Rezende

    2015-12-01

    Full Text Available The Cleaner Production (CP is an environmental management system effective to comply the environmental obligations and promote sustainable development of enterprises. In this study, the implementing possibilities of CP practices were evaluated to pharmaceutical industry, through prior identification procedures for Pharmaceutical Manufacturing Practices. The study was conducted in a scientific and health care institution, which produces pharmaceutical drugs and makes assistance for public health. The production process was evaluated and made a survey of the main points of waste and sewage generations in each stage, in order to diagnose the measures of CP established and propose new actions. Thus, by using this tool, it was possible to demonstrate the reduction of environmental impacts associated with pharmaceutical production. The Pharmaceutical Manufacturing Practices also contributed to the implementation of measures CP, preserving the final product quality, and generating environmental and economic benefits.

  12. CHARACTERIZATION OF OZONE EMISSIONS FROM AIR CLEANERS EQUIPPED WITH OZONE GENERATORS AND SENSOR AND FEEDBACK CONTROL CIRCUITRY

    Science.gov (United States)

    The paper give results of a characterization of ozone emissions from air cleaners equipped with ozone generators and sensor and feedback control circuitry. Ozone emission rates of several consumer appliances, marketed as indoor air treatment or air purification systems, were det...

  13. 某精细化工企业清洁生产审核实践研究%Cleaner Production Audit on A Fine Chemical Company

    Institute of Scientific and Technical Information of China (English)

    冯俊丽; 张时佳

    2016-01-01

    This paper takes the cleaner production of a company as example to expound the necessity and practical signifi-cance of carrying out cleaner production audit in fine chemical industry. According to eight existing issues of this company, the study provides practical low and high cost clean production project, totally 28 items. After calculating the economic, environmen-tal and social benefit of each project,the practical values of cleaner production audit to a company were pointed out, giving direc-tion of energy-saving emission reduction and low carbon development. This audit discusses the specific practice of cleaner pro-duction in fine chemical industry and it has guiding significance of practicing cleaner production in this domain.%以某企业的清洁生产审核为例,阐述分析精细化工行业开展清洁生产审核的必要性及实践意义.针对该企业存在的八方面问题,提出切实可行的无低费及中高费清洁生产方案共计28项,经核算各方案的经济、环境、社会效益,指出企业开展清洁生产审核的实际价值,为企业节能减排、低碳发展指明方向.本次审核初步探讨了清洁生产在精细化工行业的具体实践,对该行业清洁生产的践行具有一定的指导意义.

  14. Airborne exposures associated with the typical use of an aerosol brake cleaner during vehicle repair work.

    Science.gov (United States)

    Fries, Michael; Williams, Pamela R D; Ovesen, Jerald; Maier, Andrew

    2018-04-19

    Many petroleum-based products are used for degreasing and cleaning purposes during vehicle maintenance and repairs. Although prior studies have evaluated chemical exposures associated with this type of work, most of these have focused on gasoline and exhaust emissions, with few samples collected solely during the use of an aerosol cleaning product. In this case study, we assess the type of airborne exposures that would be expected from the typical use of an aerosol brake cleaner during vehicle repair work. Eight exposure scenarios were evaluated over a two-day study in which the benzene content of the brake cleaner and potential for dilution ventilation and air flow varied. Both short-term (15 min) and task-based (≥1 hr) charcoal tube samples were collected in the breathing zone and adjacent work area and analyzed for total hydrocarbons (THCs), toluene, and benzene. The majority of personal (N = 48) and area (N = 47) samples had detectable levels of THC and toluene, but no detections of benzene were found. For the personal short-term samples, average airborne concentrations ranged from 3.1 - 61.5 ppm (13.8-217.5 mg/m 3 ) for THC and 2.2 - 44.0 ppm (8.2-162.5 mg/m 3 ) for toluene, depending on the scenario. Compared to the personal short-term samples, average concentrations were generally 2 to 3 times lower for the personal task-based samples and 2 to 5 times lower for the area short-term samples. The highest exposures occurred when the garage bay doors were closed, floor fan was turned off, or greatest amount of brake cleaner was used. These findings add to the limited dataset on this topic and can be used to bound or approximate worker or consumer exposures from use of aerosol cleaning products with similar compositions and use patterns.

  15. Vocational training courses as an intervention on change of work practice among immigrant cleaners.

    Science.gov (United States)

    Jensen, Flemming W; Frydendall, Karen B; Flyvholm, Mari-Ann

    2011-11-01

    The aim of the study was to examine how knowledge and skills from vocational training courses on working techniques modified for immigrant cleaners are applied in practice and to identify factors that influence the implementation. The modifications of the standard course included language support with possibilities for translation and an extension of the duration of the course. The study is a prospective intervention study based on qualitative data. Data were collected as structured interviews and observations were carried out at the workplaces before and after the course. The study population included 31 immigrant cleaners from five different workplaces. Changes were observed in the use of working techniques (i.e., positioning of hands when using the floor mop). In some cases the use of the taught techniques was incorrect, partial, or only used part of the time. Interactions between individual factors (i.e., knowledge, awareness, capability, or work orientation) and environmental factors (i.e., equipment, time, workload, or physical surroundings) influenced the use of the techniques in practice. The course provided the participants with new working techniques through which some were able to reduce work related pain. However, with regard to incorrect and partial use of the working techniques, follow-up and post-training support is recommended. Copyright © 2011 Wiley Periodicals, Inc.

  16. IMPACT OF AN OZONE GENERATOR AIR CLEANER ON STYRENE CONCENTRATIONS IN AN INDOOR AIR QUALITY RESEARCH CHAMBER

    Science.gov (United States)

    The paper gives results of an investigation of the impact of an ozone generator air cleaner on vapor-phase styrene concentrations in a full-scale indoor air quality test chamber. The time history of the concentrations of styrene and ozone is well predicted by a simulation model u...

  17. Measurements of differential cross sections for the reactions 6,7Li(n,d)5,6He and 6,7Li(n,t)4,5He at 14.1 MeV

    International Nuclear Information System (INIS)

    Shirato, Shoji; Hata, Kazuhiro; Ando, Yoshiaki; Shibuya, Shinji; Shibata, Keiichi.

    1989-08-01

    A summary of our measured cross sections for the 14.1 MeV neutron-induced reactions on lithium isotopes has been presented. Our data were measured with two counter telescopes, each of which consisted of two gas proportional counters and silicon ΔE and E detectors. Measured energy spectra of deuterons and tritons from 6 Li(n,d)n 4 He and 7 Li(n,t)n 4 He, respectively, were analyzed by a simple final-state interaction theory. Measured angular distributions for these reactions as well as 6 Li(n,t) 4 He and 7 Li(n,d) 6 He were analyzed by exact finite-range distorted wave Born approximation (EFR-DWBA) calculations. Spectroscopic factors extracted from the EFR-DWBA analyses have been compared with theoretical predictions. (author)

  18. Saving oiled mangroves using a new non-dispersing shoreline cleaner

    International Nuclear Information System (INIS)

    Teas, H.J.; Lessard, R.R.; Canevari, G.P.; Brown, C.D.; Glenn, R.

    1993-01-01

    Mangroves are ranked as one of the most sensitive marine environments. If mangroves are oiled and no further action is taken, the probability of mortality to the trees is high. One of the ways that viscous spilled oil can kill mangroves is by covering the breathing ports, called lenticels (red mangroves) and pneumatophores (black mangroves), and asphyxiating them by preventing flow of oxygen from the atmosphere into the roots. Mangroves can also be killed by continuous inundation of their prop roots or pneumatophores for a period of ten days to two weeks, but they can survive lenticel covering by water for a few hours at high tide - so there appears to be some grace period during which lenticels can be nonfunctional and the plant can still survive once lenticel function is restored. This suggests that if oil is removed from the breathing ports during the early days after a spill, the lenticels may be able to restore oxygen delivery to the roots and spare the mangroves. Such oils are poorly removed by the washing of tidal waters or by water sprays alone. So a new shoreline cleaner (Corexit 9580), which was specially developed during the cleanup of the Valdez spill in Alaska, was tested to determine its ability to help loosen the oil so it can be washed away with water. Laboratory experiments using excised prop roots of red mangrove (Rhizophora mangle) were initially conducted to determine the feasibility of the approach. Subsequently experiments were carried out using about a hundred potted red mangroves at a test site in Florida. The prop roots, including the lenticels, were coated with a heavy oil (bunker C). After various periods of time, groups of oiled trees were treated with the shoreline cleaner to loosen and remove the oil deposit and then washed with seawater. The results showed that oiled trees could be saved by cleaning within seven days after oiling, indicating that the grace period after oiling extends for about one week

  19. Identifying and Prioritizing Cleaner Production Strategies in Raw Materials’ Warehouse of Yazdbaf Textile Company in 2015

    OpenAIRE

    Mohammad Taghi Ghaneian; Raziye Montazerolfaraj; Hakime Selsele Vaziri; Mohammad Hassan Ehrampoush; Alireza Arsalan; Tahere Zarabie

    2017-01-01

    Introduction: Cleaner productions in textile industry is achieved by reducing water and chemicals’ consumption, saving energy, reducing production of air pollution and solid wastes, reducing toxicity and noise pollution through many solutions. The purpose of the present research was to apply Strengths, Weaknesses, Opportunities, Threats (SWOT) and Quality Systems Planning Matrix (QSPM) techniques in identifying and prioritizing production in raw materials’ warehouse of Yazdbaf Tex...

  20. Ammonium Laurate Surfactant for Cleaner Deposition of Carbon Nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Nilsson, Hanna M. [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Meany, Brendan [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Ticey, Jeremy [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Sun, Chuan-Fu [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Wang, YuHuang [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States; Cumings, John [Department of Material Science and Engineering and ‡Department of Chemistry and Biochemistry, University of Maryland, College Park, Maryland 20742, United States

    2015-06-15

    Experiments probing the properties of individual carbon nanotubes (CNTs) and those measuring bulk composites show vastly different results. One major issue limiting the results is that the procedures required to separate and test CNTs introduce contamination that changes the properties of the CNT. These contamination residues often come from the resist used in lithographic processing and the surfactant used to suspend and deposit the CNTs, commonly sodium dodecyl sulfate (SDS). Here we present ammonium laurate (AL), a surfactant that has previously not been used for this application, which differs from SDS only by substitution of ionic constituents but shows vastly cleaner depositions. In addition, we show that compared to SDS, AL-suspended CNTs have greater shelf stability and more selective dispersion. These results are verified using transmission electron microscopy, atomic force microscopy, ζ-potential measurements, and Raman and absorption optical spectroscopy. This surfactant is simple to prepare, and the nanotube solutions require minimal sonication and centrifugation in order to outperform SDS.

  1. Implementing cleaner production in an automotive company: an application of material input per unit of service tool to measure environmental and economic advantages

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2017-09-01

    Full Text Available Environmental impact reduction has been a growing concern of the automotive industry. One of the main challenges is to implement Cleaner Production as a tool to reduce environmental impacts and provide financial profits. The purpose of this article was to evaluate the environmental impact and economic gains by implementing Cleaner Production, using an unexplored approach, in a company of the automotive sector. The research approach used was a case study, carried out by observation and semi-structured surveys. The production process chosen was updated, so technologies were changed to reduce biotic and abiotic disposal. For the analysis of environmental impacts, the ‘Material Input Per Unit of Service’ tool (MIPS was used, in which data was used to calculate: annual net profit; return on investment (% and return on investment for a period. The results showed that Cleaner Production implementation focusing on changing technology in the production process caused a 75% reduction in environmental impact, and a 62.7% decrease in production costs. Although of this study considers only one case to test the procedure applicability, it can be easily repeated in other more complex systems, by merely making the necessary adjustments due to the complexity of the processes involved.

  2. Long Term Effects on Risk Factors for Cardiovascular Disease after 12-Months of Aerobic Exercise Intervention - A Worksite RCT among Cleaners.

    Directory of Open Access Journals (Sweden)

    Mette Korshøj

    Full Text Available Occupational groups exposed to high occupational physical activity have an increased risk for cardiovascular disease (CVD. This may be explained by the high relative aerobic workload. Enhanced cardiorespiratory fitness reduces the relative aerobic workload. Thus, the aim was to evaluate the 12-months effects of worksite aerobic exercise on risk factors for CVD among cleaners.One hundred and sixteen cleaners aged 18-65 years were randomized to a group performing aerobic exercise and a reference group receiving lectures. Outcomes were collected at baseline and after 12-months. A repeated measures 2×2 multi-adjusted mixed-model design was applied to compare the between-group differences using intention-to-treat analysis.Between-group differences (p<0.05 were found favouring the aerobic exercise group: cardiorespiratory fitness 2.15 (SE 1.03 mlO2/min/kg, aerobic workload -2.15 (SE 1.06 %HRR, resting HR -5.31 (SE 1.61 beats/min, high sensitive C-reactive protein -0.65 (SE 0.24 μg/ml. The blood pressure was unaltered. Stratified analyses on relative aerobic workload at baseline revealed that those with relative aerobic workloads ≥30% of HRR seems to impose a notable adverse effect on resting and ambulatory blood pressure.This long-term worksite aerobic exercise intervention among cleaners led to several beneficial effects, but also potential adverse effects among those with high relative aerobic workloads.Controlled-Trials.com ISRCTN86682076.

  3. Cleaner production options for reducing industrial waste: the case of batik industry in Malang, East Java-Indonesia

    Science.gov (United States)

    Sirait, M.

    2018-01-01

    The aim of this research is to conduct cleaner production options for improving the environmental performance during the production of batik industry, the case of UKM batik, Malang, East Java. Batik industry is one of small and medium textile industry which has contribution to economic growth in Malang. However, during production the batik, it generates wastewater that has potential to decrease the environmental performance. Wastewater from Celaket batik industry has BOD, COD, TSS, and pH level is far larger than the threshold of water quality standard as a result of use chemical substance during the dyes processing. In order to prevent generating wastewater, this study utilized cleaner production options, such as substitution of input material.Substitution of input material for dyes process was implemented by replacement chemical dyes (e.g.indigosol, nafthol, rapid) with natural dyes (e.g. Indigofero Tintoria). Modifying of technology/equipment was conducted by developing wastewater treatment equipment to reduce waste of batik production. The implementation of this strategy was carried out by changing input material from chemical dyes with natural dyes. The CP uptake could reduce significantly the environmental impact in term of reduction of COD, BOD, and TSS.

  4. Playing after work? Opportunities and challenges of a physical activity programme for female cleaners

    DEFF Research Database (Denmark)

    Lenneis, Verena; Pfister, Gertrud Ursula

    2016-01-01

    experience with sport and exercise and struggled with the high demands at work and a “second shift” at home. As a consequence, most participants found the training too time- and energy-consuming. We conclude that exercise programmes should preferably be conducted at the workplace and during working hours....... factors constrained and which supported participation. The interviews revealed a high degree of appreciation for the training but also pointed to a number of constraints which were embedded into the participants’ biographies and everyday lives as migrant cleaners in Denmark. Most women had no previous...

  5. Radiation processing of agricultural products: status and potential contribution to a cleaner environment

    International Nuclear Information System (INIS)

    Lapidot, M.

    1979-01-01

    The current status of radiation processing of agricultural products is briefly reviewed with special regard to those processes which may contribute to a cleaner environment. Radurization of poultry feed and poultry meat is shown to be a major contributor to the reduction of a significant public health problem-salmonellosis. Radiation sterilized animal feeds can be produced by processing garbage - a major environmental pollutant. Radicidation and radappertization are effective processes in the treatment of sludges and waste water, to prevent pollution of seas or ground. Radiation processes can effectively replace fungicides and insecticides in the treatment of agricultural crops and thus reduce environmental pollution. (author)

  6. Inhaling Difluoroethane Computer Cleaner Resulting in Acute Kidney Injury and Chronic Kidney Disease

    Directory of Open Access Journals (Sweden)

    Kristen Calhoun

    2018-01-01

    Full Text Available Difluoroethane is the active ingredient in various computer cleaners and is increasingly abused by teenagers due to its ease of access, quick onset of euphoric effects, and lack of detectability on current urine drug screens. The substance has detrimental effects on various organ systems; however, its effects on the kidneys remain largely unreported. The following case report adds new information to the developing topic of acute kidney injury in patients abusing difluoroethane inhalants. In addition, it is one of the first to show a possible relationship between prolonged difluoroethane abuse and the development of chronic kidney disease in the absence of other predisposing risk factors.

  7. Impact of cleaner fuel use and improved stoves on acute respiratory infections: evidence from India.

    Science.gov (United States)

    Lamichhane, Prabhat; Sharma, Anurag; Mahal, Ajay

    2017-11-01

    The use of cleaner fuel and improved stoves has been promoted as a means to lower harmful emissions from solid fuels. However, little is known about how exclusive use of cleaner fuels, mixed fuel use and improved stoves influences children's health. We compared the impact of using liquefied petroleum gas (LPG) exclusively with mixed fuel use (LPG plus polluting fuels) and with exclusive use of polluting fuels on acute respiratory infections (ARI) among 16 157 children 0-4 years of age from households in the 2012 Indian Human Development Survey. Inverse probability weighting (IPW) procedures for multiple treatments were used for this evaluation. Children from households using LPG had a 5.0% lower probability of reporting ARI relative to exclusive users of polluting fuels, with larger effects (10.7%) in rural households. The probability of ARI in households using improved stoves and mixed fuel use was also lower in rural households, by 2.9% and 2.8%, respectively. The magnitude of effect varied across population subgroups, with the highest effects for children living in households living in kachha (low quality material) houses households identified as poor. Use of LPG and improved stoves lowered the probability of ARI among children younger than 5 years. © The Author 2017. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Pollution prevention for cleaner air: EPA's air and energy engineering research laboratory

    International Nuclear Information System (INIS)

    Shaver, E.M.

    1992-01-01

    The article discusses the role of EPA's Air and Energy Engineering Research Laboratory (AEERL) in pollution prevention research for cleaner air. For more than 20 years, AEERL has been conducting research to identify control approaches for the pollutants and sources which contribute to air quality problems. The Laboratory has successfully developed and demonstrated cost-effective sulfur dioxide, nitrogen oxides, and particulate control technologies for fossil fuel combustion sources. More recently, it has expanded its research activities to include indoor air quality, radon, organic control, stratospheric ozone depletion, and global warming. AEERL also develops inventories of air emissions of many types. Over the last several years, it has made substantial efforts to expand research on pollution prevention as the preferred choice for air emissions reduction

  9. Astigmatism compensation in mode-cleaner cavities for the next generation of gravitational wave interferometric detectors

    Energy Technology Data Exchange (ETDEWEB)

    Barriga, Pablo J. [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)]. E-mail: pbarriga@cyllene.uwa.edu.au; Zhao Chunnong [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia); Blair, David G. [School of Physics, University of Western Australia, Crawley, WA 6009 (Australia)

    2005-06-06

    Interferometric gravitational wave detectors use triangular ring cavities to filter spatial and frequency instabilities from the input laser beam. The next generation of interferometric detectors will use high laser power and greatly increased circulating power inside the cavities. The increased power inside the cavities increases thermal effects in their mirrors. The triangular configuration of conventional mode-cleaners creates an intrinsic astigmatism that can be corrected by using the thermal effects to advantage. In this Letter we show that an astigmatism free output beam can be created if the design parameters are correctly chosen.

  10. Astigmatism compensation in mode-cleaner cavities for the next generation of gravitational wave interferometric detectors

    International Nuclear Information System (INIS)

    Barriga, Pablo J.; Zhao Chunnong; Blair, David G.

    2005-01-01

    Interferometric gravitational wave detectors use triangular ring cavities to filter spatial and frequency instabilities from the input laser beam. The next generation of interferometric detectors will use high laser power and greatly increased circulating power inside the cavities. The increased power inside the cavities increases thermal effects in their mirrors. The triangular configuration of conventional mode-cleaners creates an intrinsic astigmatism that can be corrected by using the thermal effects to advantage. In this Letter we show that an astigmatism free output beam can be created if the design parameters are correctly chosen

  11. Job strain associated with increases in ambulatory blood and pulse pressure during and after work hours among female hotel room cleaners.

    Science.gov (United States)

    Feaster, Matt; Krause, Niklas

    2018-06-01

    Previously documented elevated hypertension rates among Las Vegas hotel room cleaners are hypothesized to be associated with job strain. Job strain was assessed by questionnaire. Ambulatory blood pressure (ABP) was recorded among 419 female cleaners from five hotels during 18 waking hours. Multiple linear regression models assessed associations of job strain with ABP and pulse pressure for 18-h, work hours, and after work hours. Higher job strain was associated with increased 18-h systolic ABP, after work hours systolic ABP, and ambulatory pulse pressure. Dependents at home but not social support at work attenuated effects. Among hypertensive workers, job strain effects were partially buffered by anti-hypertensive medication. High job strain is positively associated with blood pressure among female hotel workers suggesting potential for primary prevention at work. Work organizational changes, stress management, and active ABP surveillance and hypertension management should be considered for integrated intervention programs. © 2018 Wiley Periodicals, Inc.

  12. Relationship Between Piercing-Sucking Insect Control and Internal Lint and Seed Rot in Southeastern Cotton (Gossypium hirsutum L.).

    Science.gov (United States)

    Medrano, Enrique G; Bell, Alois A; Greene, Jeremy K; Roberts, Phillip M; Bacheler, Jack S; Marois, James J; Wright, David L; Esquivel, Jesus F; Nichols, Robert L; Duke, Sara

    2015-08-01

    In 1999, crop consultants scouting for stink bugs (Hemiptera spp.) in South Carolina discovered a formerly unobserved seed rot of cotton that caused yield losses ranging from 10 to 15% in certain fields. The disease has subsequently been reported in fields throughout the southeastern Cotton Belt. Externally, diseased bolls appeared undamaged; internally, green fruit contain pink to dark brown, damp, deformed lint, and necrotic seeds. In greenhouse experiments, we demonstrated transmission of the opportunistic bacterium Pantoea agglomerans by the southern green stink bug, Nezara viridula (L.). Here, green bolls were sampled from stink bug management plots (insecticide protected or nontreated) from four South Atlantic coast states (North Carolina, South Carolina, Georgia, and Florida) to determine disease incidence in the field and its association with piercing-sucking insects feeding. A logistic regression analysis of the boll damage data revealed that disease was 24 times more likely to occur (P = 0.004) in bolls collected from plots in Florida, where evidence of pest pressure was highest, than in bolls harvested in NC with the lowest detected insect pressure. Fruit from plots treated with insecticide, a treatment which reduced transmission agent numbers, were 4 times less likely to be diseased than bolls from unprotected sites (P = 0.002). Overall, punctured bolls were 125 times more likely to also have disease symptoms than nonpunctured bolls, irrespective of whether or not plots were protected with insecticides (P = 0.0001). Much of the damage to cotton bolls that is commonly attributed to stink bug feeding is likely the resulting effect of vectored pathogens. Published by Oxford University Press on behalf of Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  13. Preservatives in Personal Hygiene and Cosmetic Products, Topical Medications, and Household Cleaners in Spain.

    Science.gov (United States)

    Pastor-Nieto, María Antonia; Alcántara-Nicolás, Francisco; Melgar-Molero, Virginia; Pérez-Mesonero, Raquel; Vergara-Sánchez, Aránzazu; Martín-Fuentes, Adriana; González-Muñoz, Patricia; de Eusebio-Murillo, Ester

    2017-10-01

    Preservatives are added to cosmetic, household cleaning, and other industrial products to prevent the growth of microorganisms. Unfortunately, exposure to these substances can cause sensitization. Between January and June 2015, we analyzed the ingredients of 2300 products commercially available in Spain to identify the frequency of a wide variety of preservatives in different product categories. We analyzed 1093 skin care and cosmetic products sold exclusively in pharmacies (dermocosmetics), 458 household cleaning and personal hygiene and cosmetic products sold in supermarkets, 636 topical medications, and 113 cosmetic products sold in a herbal shop. Phenoxyethanol, citric acid, sodium benzoate, and potassium sorbate were very common in all the cosmetic product categories. Parabens were present in 16.1% of dermocosmetic products, 14.45% of cosmetic products available in supermarkets, 0.88% of cosmetic products available in the herbal shop, 5.18% of topical medications, and in none of the cleaning products. Isothiazolinones were identified in 2.56% of dermocosmetic products, 18% of cosmetic products in supermarkets, 7.9% of cosmetic products in the herbal shop, 63.63% of household cleaners, and in none of the topical medications. Formaldehyde releasers were detected in 5.76% of dermocosmetic products, 6.42% of cosmetic products sold in supermarkets, 7.96% of cosmetic products sold in the herbal shop, 3.93% of topical medications, and 16.74% of household cleaners. Evaluation of the presence of preservatives in everyday products allows us to indirectly estimate exposure levels to each one. Measures restricting the use of the most problematic preservatives need to be strengthened. Copyright © 2017 AEDV. Publicado por Elsevier España, S.L.U. All rights reserved.

  14. The performance of cleaner wrasse, Labroides dimidiatus, in a reversal learning task varies across experimental paradigms

    Directory of Open Access Journals (Sweden)

    Simon Gingins

    2018-05-01

    Full Text Available Testing performance in controlled laboratory experiments is a powerful tool for understanding the extent and evolution of cognitive abilities in non-human animals. However, cognitive testing is prone to a number of potential biases, which, if unnoticed or unaccounted for, may affect the conclusions drawn. We examined whether slight modifications to the experimental procedure and apparatus used in a spatial task and reversal learning task affected performance outcomes in the bluestreak cleaner wrasse, Labroides dimidiatus (hereafter “cleaners”. Using two-alternative forced-choice tests, fish had to learn to associate a food reward with a side (left or right in their holding aquarium. Individuals were tested in one of four experimental treatments that differed slightly in procedure and/or physical set-up. Cleaners from all four treatment groups were equally able to solve the initial spatial task. However, groups differed in their ability to solve the reversal learning task: no individuals solved the reversal task when tested in small tanks with a transparent partition separating the two options, whereas over 50% of individuals solved the task when performed in a larger tank, or with an opaque partition. These results clearly show that seemingly insignificant details to the experimental set-up matter when testing performance in a spatial task and might significantly influence the outcome of experiments. These results echo previous calls for researchers to exercise caution when designing methodologies for cognition tasks to avoid misinterpretations.

  15. Cleaner Production and Workplace Health and Safety: A combined approach. A case study from South Africa

    DEFF Research Database (Denmark)

    Hedlund, Frank Huess

    Environmental goals may be pursued narrow-mindedly with no attention paid to the workplace. This book examines combined approaches in cleaner production projects. It explores two main avenues. First, integration into the project specification. The planning tools in use by assistance agencies......, integration of management systems is an option. A study on the South African Nosa 5-Star system refutes earlier criticism of dismal performance of top-down systems. It is argued that integration at this level is viable. For small companies, less formalistic approaches are required. ILO's network concept WISE...

  16. Quality care means valuing care assistants, porters, and cleaners too.

    Science.gov (United States)

    Toynbee, P

    2003-12-01

    All too often, the focus of the very clever strategy papers produced in the upper reaches of the health department is on the next grand plan. Some of these reforms have been catastrophic for the quality of service that patients experience at ward level. Of these, the contracting out culture introduced in the 1980s and the 1990s has been the worst. Researching my book, Hard work-life in low pay Britain, I took six jobs at around the minimum wage, including work as a hospital porter, as a hospital cleaner, and as a care assistant. These are jobs at the sharp end, up close and very personal to the patients, strongly influencing their experiences of the services they were using. Yet they are low paid, undervalued jobs that fall below the radar of the policy makers. In hospitals they need to be brought back in-house and integrated into a team ethos. Paying these people more would cost more, but it would also harvest great rewards by using their untapped commitment.

  17. VAT-teater vaatab 30 aastat tulevikku / Tiiu Laks

    Index Scriptorium Estoniae

    Laks, Tiiu, 1984-

    2010-01-01

    VAT Teater toob S. Becketti "Krappi viimase lindi" lavale ebatavalisel moel. Festivalil "Draama 2010" Tartus toimub 8. septembril esimene avalik lindistus "...viimane lint / Saare esimene lint". Kontseptsioon: Tanel Saar ja Co. Esitus: Tanel Saar ja Hanna Allsaar. Näitejuhid-konsultandid: Rait Avestik ja Aare Toikka. "Krappi viimane lint" esietendub VAT Teatri ja Tanel Saare esituses 2040. a. sügisel. Festivali "Draama 2010" kavast

  18. Genetic variation and heritability for cotton seed, fiber and oil traits in gossypium hirsutum

    International Nuclear Information System (INIS)

    Khan, N.U.; Farhatullah; Batool, S.; Makhdoom, K.; Marwat, K.B.; Hassan, G.; Ahmad, W.; Khan, H.U.

    2010-01-01

    The research work pertaining to the study of genetic variability, heritability, genetic gain and correlation for cottonseed, fiber and cottonseed oil % in Gossypium hirsutum cultivars was conducted during 2005 at NWFP Agricultural University Peshawar, Pakistan. Analysis of variance manifested highly significant differences among the genotypes for all the traits except seeds per locule. Genetic potential range of eight cotton cultivars for different parameters was recorded i.e. seeds locule-1 (6.33 to 6.60), seeds boll-1 (26.10 to 28.47), seed index (8.61 to 9.69 g), lint index (5.35 to 6.05 g), lint % (35.17 to 38.13 %), seed cotton yield (1200 to 2450 kg ha/sup -1/) and cottonseed oil % (27.52 to 30.15%). Genetic variances were found almost greater than the environmental variances for all the traits except seeds locule-1 and seed index. High broad sense heritability and selection response were also formulated for seeds boll-1 (0.67, 0.84), seed index (0.77, 0.47 g), lint index (0.96, 0.33 g), lint % (0.96, 1.66 %), seed cotton yield (0.98, 643.16 kg) and cottonseed oil % (0.87, 1.28 %), respectively. Correlation of yield with other traits was found positive for majority of traits except seeds locule-1 and cotton seed oil %. Seed cotton yield is our ultimate goal in growing cotton besides lint %. Highest seed cotton yield was recorded in CIM-499 followed by CIM-473, CIM-496 and CIM-506 and were also found as the second and third top scoring genotypes for seeds per boll, seed index, lint % and cottonseed oil %. Cultivar SLH-279 performed better for lint index, lint % and oil %. This type of correlation is rarely found and ultra desirable by the cotton breeders and a little genetic gain in seed and lint traits, and oil content is a great accomplishment. (author)

  19. A randomised controlled trial among cleaners--effects on strength, balance and kinesiophobia

    DEFF Research Database (Denmark)

    Jørgensen, Marie Birk; Ektor-Andersen, John; Sjøgaard, Gisela

    2011-01-01

    , and kinesiophobia from CBTr. The improved strength, postural balance and kinesiophobia may improve the cleaners' tolerance for high physical work demands. Future studies should investigate the potential in the combination of PCT and CBTr in a workplace intervention. Current controlled trials ISRCTN96241850....... training (PCT, n = 95), Cognitive behavioural theory-based training (CBTr, n = 99) and Reference group (REF, n = 100). Interventions were conducted during work hours for an average of 1 hour/week. Muscle strength was measured by maximal voluntary contractions in trunk/extension, and shoulder abduction....../elevation. Postural balance was measured on a force platform. Kinesiophobia was measured with Tampa Scale for Kinesiophobia. Test and questionnaires were completed at baseline and at 3-month follow-up and analyses followed the intention-to-treat (ITT) principle with last observation carried forward in case of missing...

  20. Optical design and suspension system of the KAGRA output mode-cleaner

    Science.gov (United States)

    Kasuya, Junko; Winterflood, John; Li, Ju; Somiya, Kentaro

    2018-02-01

    KAGRA is a Japanese large scale, underground, cryogenic gravitational telescope which is under construction in the Kamioka mine. For using cryogenic test masses, the sensitivity of KAGRA is limited mainly by quantum noise. In order to reduce quantum noise, KAGRA employs an output mode-cleaner (OMC) at the output port that filters out junk light but allows the gravitational wave signal to go through. The requirement of the KAGRA OMC is even more challenging than other telescopes in the world since KAGRA plans to tune the signal readout phase so that the signal-to-noise ratio for our primary target source can be maximized. A proper selection of optical parameters and anti-vibration devices is required for the robust operation of the OMC. In this proceeding, we show our final results of modal-model simulations, in which we downselected the cavity length, the round-trip Gouy phase shift, the finesse, and the seismic isolation ratio for the suspended optics.

  1. Cleaner fuels for ships provide public health benefits with climate tradeoffs.

    Science.gov (United States)

    Sofiev, Mikhail; Winebrake, James J; Johansson, Lasse; Carr, Edward W; Prank, Marje; Soares, Joana; Vira, Julius; Kouznetsov, Rostislav; Jalkanen, Jukka-Pekka; Corbett, James J

    2018-02-06

    We evaluate public health and climate impacts of low-sulphur fuels in global shipping. Using high-resolution emissions inventories, integrated atmospheric models, and health risk functions, we assess ship-related PM 2.5 pollution impacts in 2020 with and without the use of low-sulphur fuels. Cleaner marine fuels will reduce ship-related premature mortality and morbidity by 34 and 54%, respectively, representing a ~ 2.6% global reduction in PM 2.5 cardiovascular and lung cancer deaths and a ~3.6% global reduction in childhood asthma. Despite these reductions, low-sulphur marine fuels will still account for ~250k deaths and ~6.4 M childhood asthma cases annually, and more stringent standards beyond 2020 may provide additional health benefits. Lower sulphur fuels also reduce radiative cooling from ship aerosols by ~80%, equating to a ~3% increase in current estimates of total anthropogenic forcing. Therefore, stronger international shipping policies may need to achieve climate and health targets by jointly reducing greenhouse gases and air pollution.

  2. Associations between psychological demands, decision latitude, and job strain with smoking in female hotel room cleaners in Las Vegas.

    Science.gov (United States)

    Rugulies, Reiner; Scherzer, Teresa; Krause, Niklas

    2008-01-01

    Little is known of the impact of the work environment on smoking among women holding low-paid jobs in the service sector. To study the associations between the components of the demand-control model with smoking in hotel room cleaners. We conducted a survey on work and health among 776 female hotel room cleaners in Las Vegas. Associations between psychosocial work characteristics and smoking were analyzed with multivariate regression analyses. Psychosocial work characteristics were associated with smoking after adjustment for covariates. Effect estimates were substantially reduced by additional adjustment for ethnicity, but remained significant for high psychological demands and smoking prevalence (OR = 1.97, p = 0.02), high job strain and smoking prevalence (OR = 1.87, p = 0.04), and high job strain and smoking intensity (coefficient = 3.52, p = 0.03). When analyses were restricted to Hispanic workers and further adjusted for place of birth, low decision latitude (coefficient = 3.94, p = 0.04) and high job strain (coefficient = 4.57, p = 003) were associated with smoking intensity but not with smoking status. Workplace smoking cessation programs may benefit from a primary prevention component reducing job strain among service workers. More research is needed on perceived and objective differences in psychosocial work characteristics across ethnic, immigrant, and other social groups within the same occupation.

  3. Identifying and Prioritizing Cleaner Production Strategies in Raw Materials’ Warehouse of Yazdbaf Textile Company in 2015

    Directory of Open Access Journals (Sweden)

    Mohammad Taghi Ghaneian

    2017-03-01

    Full Text Available Introduction: Cleaner productions in textile industry is achieved by reducing water and chemicals’ consumption, saving energy, reducing production of air pollution and solid wastes, reducing toxicity and noise pollution through many solutions. The purpose of the present research was to apply Strengths, Weaknesses, Opportunities, Threats (SWOT and Quality Systems Planning Matrix (QSPM techniques in identifying and prioritizing production in raw materials’ warehouse of Yazdbaf Textile Factory. Materials and Methods: In this research, effective internal and external factors in cleaner production were identified by providing the required information through field visit and interview with industry managers and supervisors of raw materials’ warehouse. Finally, To form matrix of internal and external factors 17 important internal factors and 7 important external factors were identified and selected respectively.Then, QSPM matrix was formed to determine the attractiveness and priority of the selected strategies by using results of internal and external factors and SWOT matrixes. Results: According to the results, the total score of raw materials’ warehouse in Internal Factor Evaluation (IFE matrix is equal to 2.90 which shows the good situation of warehouse than the internal factors. However, the total score in External Factor Evaluation (EFE matrix is 2.14 and indicates the relative weak situation of warehouse than the external factors. Conclusion: Based on the obtained results, continuity, monitor, and improvement of the general plan of qualitative control (QC of raw materials and laboratory as well as more emphasis on quality indexes according to its importance in the production processes were selected as the most important strategies. 

  4. The nature of navel fluff.

    Science.gov (United States)

    Steinhauser, Georg

    2009-06-01

    Hard facts on a soft matter! In their popular scientific book (Leyner M, Goldberg B. Why do men have nipples - hundreds of questions you'd only ask a doctor after your third martini. New York: Three Rivers Press; 2005), Leyner and Goldberg raised the question why "some belly buttons collect so much lint". They were, however, not able to come up with a satisfactory answer. The hypothesis presented herein says that abdominal hair is mainly responsible for the accumulation of navel lint, which, therefore, this is a typically male phenomenon. The abdominal hair collects fibers from cotton shirts and directs them into the navel where they are compacted to a felt-like matter. The most abundant individual mass of a piece of lint was found to be between 1.20 and 1.29 mg (n=503). However, due to several much larger pieces, the average mass was 1.82 mg in this three year study. When the abdominal hair is shaved, no more lint is collected. Old T-shirts or dress shirts produce less navel fuzz than brand new T-shirts. Using elemental analysis, it could be shown that cotton lint contains a certain amount of foreign material, supposedly cutaneous scales, fat or proteins. Incidentally, lint might thus fulfill a cleaning function for the navel.

  5. Cardiorespiratory fitness, cardiovascular workload and risk factors among cleaners; a cluster randomized worksite intervention

    DEFF Research Database (Denmark)

    Korshøj, Mette; Krustrup, Peter; Jørgensen, Marie Birk

    2012-01-01

    . The clusters will be balanced on the following criteria: Geographical work location, gender, age and seniority. Cleaners are randomized to either I) a reference group, receiving lectures concerning healthy living, or II) an intervention group, performing worksite aerobic exercise. Data collection......ABSTRACT: BACKGROUND: Prevalence of cardiovascular risk factors is unevenly distributed among occupational groups. The working environment, as well as lifestyle and socioeconomic status contribute to the disparity and variation in prevalence of these risk factors. High physical work demands have...... been shown to increase the risk for cardiovascular disease and mortality, contrary to leisure time physical activity. High physical work demands in combination with a low cardiorespiratory fitness infer a high relative workload and an excessive risk for cardiovascular mortality. Therefore, the aim...

  6. Dichlorvos (DDVP residue removal from tomato by washing with tap and ozone water, a commercial detergent solution and ultrasonic cleaner

    Directory of Open Access Journals (Sweden)

    Ali HESHMATI

    Full Text Available Abstract Dichlorvos (DDVP is one of the most consumption chlorinated organophosphate insecticide used on tomato. The knowledge about the influence of postharvest household processes on the levels of DDVP residues in vegetables is required to estimate dietary exposure. In this study, the removal of sprayed dichlorvos (DDVP on tomato by washing with tap, ozonated water (in dosages of 2, 4 and 6 mg ozone/L, a commercial detergent solution (in concentration of 1, 2 and 3% and ultrasonic cleaner (with power of 100, 200 and 300 W was investigated. DDVP residue was determined by gas chromatography with electron capture detector. Washing processes led to the significant reduction of DDVP. The gradual increase in the percentage of the removal was observed due to increment of washing time, ozone dosage, and concentration of detergent solution as well as ultrasonic power. The maximum removal percentage of DDVP after 15 min of washing with tap and ozonated water, a detergent solution and ultrasonic cleaner was 30.7, 91.9, 70.7, and 88.9%, respectively. In general, results indicated washing with tap, ozonated water, a detergent solution and ultrasonic cleaning are effective methods for removal of DDVP from tomato and reduction of its dietary exposure without influence on product quality.

  7. Analyse écophysiologique et modélisation de l’interaction génotype x environnement x itinéraire technique chez le cotonnier (Gossypium hirsutum L.) au Cameroun pour la conception d'idéotypes

    OpenAIRE

    Loison , Romain

    2015-01-01

    Cotton lint is the first natural fiber used in the world. Cotton provides income to more than 10 million persons in West and Central Africa. In Cameroon, it is produced under rainfed conditions and water shortage is the major abiotic factor limiting yield and lint quality. In this context, a breeding program was initiated in 1950 by IRCT (Institut de Recherches du Coton et des Textiles Exotiques) to increase lint yield, fiber quality and disease resistance. After 60 years, this program has re...

  8. Utilization of cotton waste for regenerated cellulose fibres: Influence of degree of polymerization on mechanical properties.

    Science.gov (United States)

    De Silva, Rasike; Byrne, Nolene

    2017-10-15

    Cotton accounts for 30% of total fibre production worldwide with over 50% of cotton being used for apparel. In the process from cotton bud to finished textile product many steps are required, and significant cotton waste is generated. Typically only 30% of pre consumer cotton is recycled. Here we use cotton waste lint to produce regenerated cellulose fibres (RCF). We find the RCF from waste cotton lint had increased mechanical properties compared to RCF produced from wood pulp. We show that this is likely linked to the higher degree of polymerization (DP) of waste cotton lint. An ionic liquid is used to dissolve the cotton lint and the rheology of the spinning is measured. The properties of the RCF are characterized and compared to wood pulp RCF. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Cleaner production: Minimizing hazardous waste in Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Bratasida, D.L. [BAPEDAL, Jakarta (Indonesia)

    1996-12-31

    In the second long-term development plan, industry plays a significant role in economic growth. In Indonesia, industries grow very fast; such fast growth can adversely effect the environment. Exploitation of assets can mean depletion of natural resources and energy, which, if incorrectly managed, can endanger human life and the environment. The inefficient use of natural resources will accelerate their exhaustion and generate pollution, resulting in environmental damage and threats to economic development and human well being. In recent years, changes in the approach used to control pollution have been necessary because of the increasing seriousness of the problems. Initial environmental management strategies were based on a carrying capacity approach; the natural assimilative capacity accommodated the pollution load that was applied. The environmental management strategies adopted later included technologies applied to the end of the discharge point (so-called {open_quotes}end-of-pipe{close_quotes} treatments). Until now, environmental management strategies focused on end-of-pipe approaches that control pollutants after they are generated. These approaches concentrate on waste treatment and disposal to control pollution and environmental degradation. However, as industry develops, waste volumes continue to increase, thereby creating further environmental problems. In addition, the wastes produced tend to have more complex characteristics and are potentially more difficult to treat for a reasonable cost. There are often technical and financial obstacles to regulatory compliance if waste treatment is relied on as the only means of achieving environmental objectives. Consequently, the reactive end-of-pipe treatment approach has been changed to a proactive cleaner production approach. This approach is based on the concept of sustainable development and is designed to prevent pollution as well as to protect natural resources and the quality of the environment.

  10. Household vacuum cleaners vs. the high-volume surface sampler for collection of carpet dust samples in epidemiologic studies of children

    Directory of Open Access Journals (Sweden)

    Buffler Patricia A

    2008-02-01

    Full Text Available Abstract Background Levels of pesticides and other compounds in carpet dust can be useful indicators of exposure in epidemiologic studies, particularly for young children who are in frequent contact with carpets. The high-volume surface sampler (HVS3 is often used to collect dust samples in the room in which the child had spent the most time. This method can be expensive and cumbersome, and it has been suggested that an easier method would be to remove dust that had already been collected with the household vacuum cleaner. However, the household vacuum integrates exposures over multiple rooms, some of which are not relevant to the child's exposure, and differences in vacuuming equipment and practices could affect the chemical concentration data. Here, we compare levels of pesticides and other compounds in dust from household vacuums to that collected using the HVS3. Methods Both methods were used in 45 homes in California. HVS3 samples were collected in one room, while the household vacuum had typically been used throughout the home. The samples were analyzed for 64 organic compounds, including pesticides, polycyclic aromatic hydrocarbons, and polychlorinated biphenyls (PCBs, using GC/MS in multiple ion monitoring mode; and for nine metals using conventional microwave-assisted acid digestion combined with ICP/MS. Results The methods agreed in detecting the presence of the compounds 77% to 100% of the time (median 95%. For compounds with less than 100% agreement, neither method was consistently more sensitive than the other. Median concentrations were similar for most analytes, and Spearman correlation coefficients were 0.60 or higher except for allethrin (0.15 and malathion (0.24, which were detected infrequently, and benzo(kfluoranthene (0.55, benzo(apyrene (0.55, PCB 105 (0.54, PCB 118 (0.54, and PCB 138 (0.58. Assuming that the HVS3 method is the "gold standard," the extent to which the household vacuum cleaner method yields relative risk

  11. The relationship between low back pain and leisure time physical activity in a working population of cleaners - a study with weekly follow-ups for 1 year

    DEFF Research Database (Denmark)

    Jespersen, Tobias; Jorgensen, Marie B; Hansen, Jorgen V

    2012-01-01

    intensity in the subsequent 4 weeks. METHODS: 188 cleaners consented to participate in a 52-week text message survey about hours of LTPA and intensity of LBP (from 0 to 9) over the previous 7 days. The correlation between LBP and LTPA was calculated by Pearson correlation coefficient. During an episode...... and intensity of LBP measured on a weekly basis throughout a year showed no close correlation. Maintaining LTPA during an episode of acute LBP did not result in a positive effect on LBP in the following 4 weeks. Documentation of LTPA recommendations for acute LBP in working populations is still needed....... intensity difference between groups of 0.06; 95% confidence interval (95% CI) of 0.417 to 0.539) or higher probability of returning to initial pain level (Odds ratio 1,02; 95% CI of 0.50 to 2.09) in the following four weeks compared with cleaners decreasing LTPA during acute LBP. CONCLUSIONS: Hours of LTPA...

  12. Exploring the Stakeholders Salience for the adoption the Principles and Tools of Cleaner Production in Brazil Companies

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso Oliveira Neto

    2015-09-01

    Full Text Available Objective – The key objective of this paper is to show the primary environmental influences exerted by the government, economic agents and society on companies for the implementation of the principles and tools of cleaner production (CP, and the attributes (power, legitimacy and urgency used by stakeholders to coerce companies into adopting these principles. Design/methodology/approach – The research method employed was the application of an exploratory survey in 102 Brazilian companies and the multi-varied evaluation of data by means of multiple correspondent analysis. Findings – The study shows that some principles of CP are little used by companies in Brazil. Concerning the influences on the adoption of CP, the government, economic agents and society are singled out as the important influencers. The government influence is manifest through the adoption of environmental regulating measures (power in conjunction with sincere actions in environmental education (influence. The economic agents possess the power, legitimacy and urgency to influence the adoption of CP. Society’s influences are less relevant, in that Brazilian society has much less awareness of sustainable production and consumption as compared to other countries. Practical implications – This study shows that it is vital that Brazilian society learns more about sustainable production, because a society with no environmental conscience is a society with little means to demand the implementation of CP. Originality/value – The results of the study represent an important theoretical contribution in that, at present, there is little literature on the relationship between stakeholders and Cleaner Production. This is the first study in Brazil to address the subject.

  13. Groundwater contamination by chlorinated hydrocarbons in the soil vapour phase - risk assessment at a former dry cleaner site

    Energy Technology Data Exchange (ETDEWEB)

    Danzer, J. [Boden-und-Grundwasser GbR, Sonthofen (Germany)

    2002-07-01

    Chlorinated hydrocarbons, e.g. Perchloroethene (PCE) were commonly used for dry cleaning purposes among other ones. Since they have a significant toxic potential they impose a serious risk to groundwater quality. Due to their physico-chemical properties - particularly high volatility and medium to high water solubility - and their low biodegradation potential they are highly mobile within the unsaturated soil (vapour phase) as well as within the groundwater. This poster (paper) presents data and calculations of a consultant's ''virtual every day'' work in order to assess the risk of groundwater contamination at a former dry cleaner site. (orig.)

  14. Physical workload, work intensification, and prevalence of pain in low wage workers: results from a participatory research project with hotel room cleaners in Las Vegas.

    Science.gov (United States)

    Krause, Niklas; Scherzer, Teresa; Rugulies, Reiner

    2005-11-01

    Occupational injury rates among hotel workers exceed the national service sector average. This study assesses the prevalence of back and neck pain, and its associations with physical workload, ergonomic problems, and increasing work demands. Nine hundred forty-one unionized hotel room cleaners completed a survey about health and working conditions. Associations between job demands and pain were determined by logistic regression models adjusting for individual characteristics, cumulative work demands, care-taking responsibilities at home, and psychosocial job factors. The 1-month prevalence of severe bodily pain was 47% in general, 43% for neck, 59% for upper back, and 63% for low back pain. Workers in the highest exposure quartiles for physical workload and ergonomic problems were between 3.24 and 5.42 times more likely to report severe pain than workers in the lowest quartile. Adjusted odds ratios for work intensification ranged from 1.74 (upper back) to 2.33 (neck). Most room cleaners experience severe back or neck pain. Severe pain showed strong associations with physical workload, work intensification, and ergonomic problems.

  15. 7 CFR 1427.1203 - Eligible ELS cotton.

    Science.gov (United States)

    2010-01-01

    ... OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS COTTON Extra Long Staple (ELS) Cotton... must be either: (1) Baled lint, including baled lint classified by USDA's Agricultural Marketing..., under the provisions of this subpart, has been made available; (2) Imported ELS cotton; (3) Raw...

  16. Fourier-transform imaging of cotton and botanical and field trash mixtures

    Science.gov (United States)

    Botanical and field cotton trash comingled with cotton lint can greatly reduce the marketability and quality of cotton. Trash can be found comingled with cotton lint during harvesting, ginning, and processing, thus this study is of interest. Attenuated Total Reflectance-Fourier Transform Infrared (A...

  17. Heterosis and correlation in interspecific and intraspecific hybrids of cotton.

    Science.gov (United States)

    Munir, S; Hussain, S B; Manzoor, H; Quereshi, M K; Zubair, M; Nouman, W; Shehzad, A N; Rasul, S; Manzoor, S A

    2016-06-24

    Interspecific and intraspecific hybrids show varying degrees of heterosis for yield and yield components. Yield-component traits have complex genetic relationships with each other. To determine the relationship of yield-component traits and fiber traits with seed cotton yield, six lines (Bt. CIM-599, CIM-573, MNH-786, CIM-554, BH-167, and GIZA-7) and three test lines (MNH-886, V4, and CIM-557) were crossed in a line x tester mating design. Heterosis was observed for seed cotton yield, fiber traits, and for other yield-component traits. Heterosis in interspecific hybrids for seed cotton yield was more prominent than in intraspecific hybrids. The interspecific hybrid Giza-7 x MNH-886 had the highest heterosis (114.77), while among intraspecific hybrids, CIM-554 x CIM-557 had the highest heterosis (61.29) for seed cotton yield. A major trait contributing to seed cotton yield was bolls/plant followed by boll weight. Correlation studies revealed that bolls/plant, boll weight, lint weight/boll, lint index, seed index, lint/seed, staple length, and staple strength were significantly and positively associated with seed cotton yield. Selection based on boll weight, boll number, lint weight/boll, and lint index will be helpful for improving cotton seed yield.

  18. A Comparison between Temperature-Controlled Laminar Airflow Device and a Room Air-Cleaner in Reducing Exposure to Particles While Asleep

    DEFF Research Database (Denmark)

    Spilak, Michal; Sigsgaard, Torben; Takai, Hisamitsu

    2016-01-01

    People spend approximately one third of their life sleeping. Exposure to pollutants in the sleep environment often leads to a variety of adverse health effects, such as development and exacerbation of asthma. Avoiding exposure to these pollutants by providing a sufficient air quality in the sleep...... was significantly lower with the TLA device compared to the room air cleaner. The TLA device provided a barrier which significantly reduced the introduction of airborne particles into the breathing zone. Further studies should be conducted for the understanding of the transport of resuspended particles between...

  19. An experimental evaluation on air purification performance of Clean-Air Heat Pump (CAHP) air cleaner

    DEFF Research Database (Denmark)

    Sheng, Ying; Fang, Lei; Sun, Yuexia

    2018-01-01

    was 96.8%, which indicated that the most of gaseous pollutants were not accumulated in the CAHP. The regeneration temperature for the wheel could affect the air purification performance of CAHP. At 70 °C of regeneration temperature, the air-cleaning efficiency reached 96.7%. Up to 70% of the outdoor air......The escalation of energy consumption in buildings and heightened concerns about acceptable indoor air quality stimulate interest in the usage of air cleaner as an adjunct for indoor environmental conditioning. A regenerative desiccant wheel integrated into a ventilation system termed Clean-Air Heat...... Pump (CAHP) can improve the air quality during the process of dehumidification without using additional energy. An experimental study in a field lab was performed to investigate the air cleaning performance of CAHP. Photoacoustic gas analyzer-INNOVA was used to characterize chemical removal of indoor...

  20. Politics design of cleaner production in the electric sector for the energy scenarios of Colombia

    International Nuclear Information System (INIS)

    Figueroa P, Woody; Smith Q, Ricardo

    2001-01-01

    Cleaner production (PML) in Colombia has been implemented as an agreement of wills between the companies of different productive sectors and the Colombian environment ministry. In the electric sector, the agreement of PML has been implemented with successes and difficulties. A concern that exists today among the companies of the electric sector involved in the agreement is about its long-term viability. Supported in the planning tool of scenarios, an analysis of the possible futures of PML in the Colombian electric sector, using the energy scenarios for Colombia (UPME, 2000), is made. PML policies are designed that will allow to analyze its long-term implementation. This work seeks to contribute in the long-term analysis about the evolution and tendencies of PML in the Colombian electric sector, according with the markets dynamics, trends and competitiveness that are gaining space in the international community

  1. Metodologia de checkland aplicada à implementação da produção mais limpa em serviços Cleaner production implementation in services using checkland's methodology

    Directory of Open Access Journals (Sweden)

    Gisele Cristina Sena da Silva

    2006-12-01

    Full Text Available O programa de Produção Mais Limpa tem sido aplicado com sucesso na indústria manufatureira, entretanto, esta ferramenta está longe de ser adotada por empresas de prestação de serviço. Este artigo tem como principal contribuição caracterizar o desenvolvimento e a aplicação da Produção Mais Limpa na prestação de serviço, a partir da utilização da Metodologia de Checkland para estruturação de problemas. Essa metodologia objetiva a comparação entre sistema real (como a empresa se encontra hoje e conceitual (como a empresa iria funcionar se adotasse a Produção Mais Limpa no sentido de traçar cenários de mudanças e auxiliar os gestores na tomada de decisão sobre adotar ou não adotar este programa.The Cleaner Production program has been applied successfully in the manufacturing industry. However, this instrument is far from service company's adoption. The main contribution of this thesis is to characterize the development and application of the Cleaner Production program in Services using Checkland Methodology for structuring problems. The main objective of this methodology is make a comparison between the real system (the way the company is today and the conceptual system (the way the company would work if it adopted the Cleaner Production as it traces the changing pictures and help managers to decide on adopting this program or not. The aim of the presented Case Studies is to show how the model is applied in service companies.

  2. Inheritance of the ovule fuzzless trait for Gossypium arboreum germplasm line PI 529708

    Science.gov (United States)

    Background: Cotton is the most important fiber crop and understanding the genetic mechanisms controlling fiber production on cotton seeds can aid in the development of improved varieties with higher lint yields and improved fiber quality. Lint and fuzz are the two types of fiber produced on the cott...

  3. Skeletal Fluorosis Due To Inhalation Abuse of a Difluoroethane-Containing Computer Cleaner.

    Science.gov (United States)

    Tucci, Joseph R; Whitford, Gary M; McAlister, William H; Novack, Deborah V; Mumm, Steven; Keaveny, Tony M; Whyte, Michael P

    2017-01-01

    Skeletal fluorosis (SF) is endemic in many countries and millions of people are affected worldwide, whereas in the United States SF is rare with occasional descriptions of unique cases. We report a 28-year-old American man who was healthy until 2 years earlier when he gradually experienced difficulty walking and an abnormal gait, left hip pain, loss of mobility in his right wrist and forearm, and progressive deformities including enlargement of the digits of both hands. Dual-energy X-ray absorptiometry (DXA) of his lumbar spine, femoral neck, total hip, and the one-third forearm revealed bone mineral density (BMD) Z-scores of +6.2, +4.8, +3.0, and -0.2, respectively. Serum, urine, and bone fluoride levels were all elevated and ultimately explained by chronic sniffing abuse of a computer cleaner containing 1,1-difluoroethane. Our findings reflect SF due to the unusual cause of inhalation abuse of difluoroethane. Because this practice seems widespread, particularly in the young, there may be many more such cases. © 2016 American Society for Bone and Mineral Research. © 2016 American Society for Bone and Mineral Research.

  4. Impacts of Alterations of Organic Inputs on the Bacterial Community within the sediments of Wind Cave, South Dakota, USA

    Directory of Open Access Journals (Sweden)

    Chelius Marisa K.

    2009-01-01

    Full Text Available Wind Cave (WICA in the Black Hills of South Dakota, like many mostly dry caves in temperate regions is an energy-starved system.The biotic communities that reside in these systems are low in diversity and simple in structure, and sensitive to changes in externalinputs of organic matter. Caves open to tourist traffic offer an opportunity to study the impacts of organic matter amendments in theform of human and rodent hair and dander, clothing lint, material from rodent activity (nesting materials and feces, and algal growthin and around artificial lighting. This study reports on the impacts of carbon amendments from humans and rodents on the bacterialand archaeal communities within the sediments of WICA from annual surveys and from a manipulative study that added lint (‘L’;cellulose plus rodent dander and rodent hair, rodent feces (‘F’, and a combination of both (‘LF’. The survey confirmed that bacterialbiomass was higher in regions of the cave with the highest rates of lint (hair and natural clothing fibers input. The manipulative studyfound that organic amendments in the forms of lint (L and rodent feces (F altered the WICA bacterial community structure in bothabundance and diversity, with the combined lint and feces (LF amendment having the most significant response. The high similarityof the LF and L communities suggests that the cave bacterial community is more carbon than nitrogen limited. The implication ofcave development to management practices is immediate and practical. Even small amounts of lint and organic matter foreign tocave bacteria significantly compromise the integrity of the endemic community resulting in the replacement of undescribed speciesby assemblages with at best, unknown impacts to natural cave features.

  5. The theory of inventive problem solving integrated to the cleaner production: theoretical approach

    Directory of Open Access Journals (Sweden)

    Flávio Issao Kubota

    2013-03-01

    Full Text Available Efforts towards to reduction of environmental impact by enterprises are a solving problem process, which often need inventive solutions that generate environmental, technical and economic benefits. Hence, this research aimed to verify, through literature, and discuss the Theory of Inventive Problem Solving (TRIZ integration to cleaner production (CP strategies, in order to structure a new methodology for inventive solutions focused on reduction of effluents, waste and emissions. To perform this study, we proceeded a qualitative and descriptive research, with documentary data collection strategy. The results show predominance of CP level 1 researches, with greater focus on product improvement, a smaller quantity of process modification studies (level 1 and internal recycling (level 2, and no evidence of TRIZ utilization was obtained on level 3 (external recycling and biogenic cycles. The proposed integration is promising, since both methodologies aim ideal situation and problems’ reduction. At the end, opportunities were detected for application of TRIZ in production processes, by means of functional analysis and Ideal Final Result (IFR, being possible to direct teams towards optimization of technical systems.

  6. Cleaner bioprocesses for promoting zero-emission biofuels production in Vojvodina

    Energy Technology Data Exchange (ETDEWEB)

    Dodic, Sinisa N.; Vucurovic, Damjan G.; Popov, Stevan D.; Dodic, Jelena M.; Rankovic, Jovana A. [Department of Biotechnology and Pharmaceutical Engineering, Faculty of Technology, University of Novi Sad, Bul. cara Lazara 1, Novi Sad 21000, Vojvodina (RS)

    2010-12-15

    In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe. Vojvodina is an energy-deficient province. The incentives to invest human and financial resources in the research and development of cleaner bioprocesses are high, considering the benefits which might be achieved in terms of environment protection and manufacturing costs. In the near and medium tenu, the development of bioprocesses for waste recycling and resource recovery might be one of the most viable options, considering much research work has already been done. In Vojvodina, there are technological solutions that biofuels produced in a closed cycle, so that the quantity of waste reduced to a minimum. These solutions include the stillage (remainder after distillation) used for fattening cattle, and cattle excrement to produce biogas and manure as fertilizer. The energy required for the production of bioethanol is obtained combustion lignocelullose residual waste from the production of basic raw materials starch, or biogas. Ash from the burned biomass returned to soil as a source of minerals for plants and replacement of mineral fertilizer. Such a closed cycle is economical for small farms in Vojvodina. (author)

  7. Cleaner bioprocesses for promoting zero-emission biofuels production in Vojvodina

    International Nuclear Information System (INIS)

    Dodic, Sinisa N.; Vucurovic, Damjan G.; Popov, Stevan D.; Dodic, Jelena M.; Rankovic, Jovana A.

    2010-01-01

    In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe. Vojvodina is an energy-deficient province. The incentives to invest human and financial resources in the research and development of cleaner bioprocesses are high, considering the benefits which might be achieved in terms of environment protection and manufacturing costs. In the near and medium tenu, the development of bioprocesses for waste recycling and resource recovery might be one of the most viable options, considering much research work has already been done. In Vojvodina, there are technological solutions that biofuels produced in a closed cycle, so that the quantity of waste reduced to a minimum. These solutions include the stillage (remainder after distillation) used for fattening cattle, and cattle excrement to produce biogas and manure as fertilizer. The energy required for the production of bioethanol is obtained combustion lignocelullose residual waste from the production of basic raw materials starch, or biogas. Ash from the burned biomass returned to soil as a source of minerals for plants and replacement of mineral fertilizer. Such a closed cycle is economical for small farms in Vojvodina. (author)

  8. Work-related pain and injury and barriers to workers' compensation among Las Vegas hotel room cleaners.

    Science.gov (United States)

    Scherzer, Teresa; Rugulies, Reiner; Krause, Niklas

    2005-03-01

    We examined the prevalence of work-related pain and injury and explored barriers to and experiences of reporting among workers. We surveyed 941 unionized hotel room cleaners about work-related pain, injury, disability, and reporting. During the past 12 months, 75% of workers in our study experienced work-related pain, and 31% reported it to management; 20% filed claims for workers' compensation as a result of work-related injury, and 35% of their claims were denied. Barriers to reporting injury included "It would be too much trouble" (43%), "I was afraid" (26%), and "I didn't know how" (18%). An estimated 69% of medical costs were shifted from employers to workers. The reasons for underreporting and the extent of claim denial warrant further investigation. Implications for worker health and the precise quantification of shifting costs to workers also should be addressed.

  9. Using digital communication technology fails to improve longitudinal evaluation of an HIV prevention program aimed at Indian truck drivers and cleaners.

    Science.gov (United States)

    Schneider, John A; Kondareddy, Divya; Gandham, Sabitha; Dude, Annie M

    2012-07-01

    HIV prevention programs for truck drivers and cleaners (TDC) in India are limited. Longitudinal follow-up presents an obstacle to program effectiveness evaluation. We asked 3,028 TDC in a truck-driver HIV prevention program in Hyderabad to leave a cellular telephone number; we contacted participants 6 months after the intervention to assess sexual risk behavior change. Married, older, and better educated participants were more likely to leave phone numbers. Only 6.5% of TDC were reachable after 6 months. Longitudinal follow-up of this mobile sub-population remains a challenge, and more effective methods for evaluating HIV prevention programs are needed.

  10. Sistema de Gestión de la Calidad según la Norma ISO 9001:2008, de la Empresa de Limpieza, CLEANER

    OpenAIRE

    Ortiz-Boronat, Guillermo

    2013-01-01

    El presente proyecto, tratara sobre la implantación de un Sistema de Gestión de Calidad en una empresa de Limpieza, la cual desarrolla su actividad en la Comunidad Autónoma de Andalucía. El motivo es dinamizar la organización, intentando mejorar y corregir posibles fallos en su gestión, mejorando el registro y modo de proceder en los procesos y procedimientos de CLEANER. Por lo tanto, diseñaremos un Sistema de Gestión de la Calidad, basado en la Norma ISO 9001:2008, basándon...

  11. Work-Related Pain and Injury and Barriers to Workers’ Compensation Among Las Vegas Hotel Room Cleaners

    Science.gov (United States)

    Scherzer, Teresa; Rugulies, Reiner; Krause, Niklas

    2005-01-01

    Objectives. We examined the prevalence of work-related pain and injury and explored barriers to and experiences of reporting among workers. Methods. We surveyed 941 unionized hotel room cleaners about work-related pain, injury, disability, and reporting. Results. During the past 12 months, 75% of workers in our study experienced work-related pain, and 31% reported it to management; 20% filed claims for workers’ compensation as a result of work-related injury, and 35% of their claims were denied. Barriers to reporting injury included “It would be too much trouble” (43%), “I was afraid” (26%), and “I didn’t know how” (18%). An estimated 69% of medical costs were shifted from employers to workers. Conclusions. The reasons for underreporting and the extent of claim denial warrant further investigation. Implications for worker health and the precise quantification of shifting costs to workers also should be addressed. PMID:15727981

  12. Disparities by ethnicity, language, and immigrant status in occupational health experiences among Las Vegas hotel room cleaners.

    Science.gov (United States)

    Premji, Stéphanie; Krause, Niklas

    2010-10-01

    We examined disparities in workers' occupational health experiences. We surveyed 941 unionized Las Vegas hotel room cleaners about their experiences with work-related pain and with employers, physicians, and workers' compensation. Data were analyzed for all workers and by ethnicity, language, and immigrant status. Hispanic and English as second language (ESL) workers were more likely than their counterparts to report work-related pain and, along with immigrant workers, to miss work because of this pain. Hispanic, ESL, and immigrant workers were not consistently at a disadvantage with regard to their own responses to work-related pain but were so with respect to reported responses by workers' compensation, physicians, and employers. There are indications of disparities in occupational health experiences within this job title. The use of different group classifications, while implying different mechanisms, produced similar results. © 2010 Wiley-Liss, Inc.

  13. Analysis of socio-environmental benefits from the implementation of cleaner production strategies in the agricultural sector of the middle reaches of the river chinchiná, colombia

    OpenAIRE

    Florez Yepes, Gloria Yaneth; Calderon Cuartas, Paola Andrea

    2014-01-01

    The purpose of this paper is to assess the socio-environmental benefits generated by the implementation of cleaner production strategies in the agriculture and livestock sectors, in the middle part of the Chinchina river basin, Colombia. The methodology involves recording of field data on the basis of interviews and semi-structured dialogue; processing and analysis of data on the basis of matrix adaptation and network diagramming; and assessment of socio-environmental benefits, with determina...

  14. Power generation from chemically cleaned coals: do environmental benefits of firing cleaner coal outweigh environmental burden of cleaning?

    DEFF Research Database (Denmark)

    Ryberg, Morten W.; Owsianiak, Mikolaj; Laurent, Alexis

    2015-01-01

    Power generation from high-ash coals is a niche technology for power generation, but coal cleaning is deemed necessary to avoid problems associated with low combustion efficiencies and to minimize environmental burdens associated with emissions of pollutants originating from ash. Here, chemical...... beneficiation of coals using acid and alkali–acid leaching procedures is evaluated as a potential coal cleaning technology employing life cycle assessment (LCA). Taking into account the environmental benefits from firing cleaner coal in pulverized coal power plants and the environmental burden of the cleaning...... itself, it is demonstrated that for a wide range of cleaning procedures and types of coal, chemical cleaning generally performs worse than combustion of the raw coals and physical cleaning using dense medium separation. These findings apply for many relevant impact categories, including climate change...

  15. Aparelho de sucção tipo aspirador para captura de mosquitos A "vacuum-cleaner" type of suction apparatus for the collection of mosquitoes

    Directory of Open Access Journals (Sweden)

    Délsio Natal

    1984-10-01

    Full Text Available É feita a descrição de aparelho portátil de sucção tipo aspirador, para captura de mosquitos Culicidae. São sugeridas adaptações para coletas em diferentes situações. São feitos comentários sobre sua aplicação em pesquisa de mosquitos.A portable suction apparatus, which functions like a vacuum cleaner used for the collection of Culicidae mosquitoes is described. Adaptations for collecting in differents situations are suggested and some comments about its application in mosquitoes surveys are made.

  16. Actions on climate change, Intended Reducing carbon emissions in China via optimal industry shifts: Toward hi-tech industries, cleaner resources and higher carbon shares in less-develop regions

    International Nuclear Information System (INIS)

    Fu, Xue; Lahr, Michael; Yaxiong, Zhang; Meng, Bo

    2017-01-01

    This paper uses an optimal interregional input-output model to focus on how interregional industrial shifts alone might enable China to reduce carbon intensity instead of national shifts. The optimal industry shifts assure integration of all regions by regional products and goods in which carbon emissions are embodied via energy consumption. Generally speaking, high-tech industries concentrate in affluent regions to replace construction. Selected services increase output shares across most of regions. Meanwhile, energy-intensive manufacturing, rather than agriculture, decrease their shares to achieve the national annual growth constrained by nation’s carbon targets. Due to the need to decelerate energy use, carbon intensity goal puts particularly extreme pressure on less-developed regions to shutter heavy industries. Explicit shifts toward cleaner resources and renewable energy appear to be quite important for coal mines in Central China. - Highlights: • The model optimizes GDP constrained by industry-based emissions targets. • Scenario on carbon intensity, growth rate, energy mix, and technology advance. • Interregional I-O table informs technology, industry mix, and interregional trade. • China could raise the output of high-tech in South Coast and of selected services. • Shifts toward cleaner resources and renewable energy are important in the Central.

  17. Comparative Transcriptomics Reveals Jasmonic Acid-Associated Metabolism Related to Cotton Fiber Initiation.

    Directory of Open Access Journals (Sweden)

    Liman Wang

    Full Text Available Analysis of mutants and gene expression patterns provides a powerful approach for investigating genes involved in key stages of plant fiber development. In this study, lintless-fuzzless XinWX and linted-fuzzless XinFLM with a single genetic locus difference for lint were used to identify differentially expressed genes. Scanning electron microscopy showed fiber initiation in XinFLM at 0 days post anthesis (DPA. Fiber transcriptional profiling of the lines at three initiation developmental stages (-1, 0, 1 DPA was performed using an oligonucleotide microarray. Loop comparisons of the differentially expressed genes within and between the lines was carried out, and functional classification and enrichment analysis showed that gene expression patterns during fiber initiation were heavily associated with hormone metabolism, transcription factor regulation, lipid transport, and asparagine biosynthetic processes, as previously reported. Further, four members of the allene-oxide cyclase (AOC family that function in jasmonate biosynthesis were parallel up-regulation in fiber initiation, especially at -1 DPA, compared to other tissues and organs in linted-fuzzed TM-1. Real time-quantitative PCR (RT-qPCR analysis in different fiber mutant lines revealed that AOCs were up-regulated higher at -1 DPA in lintless-fuzzless than that in linted-fuzzless and linted-fuzzed materials, and transcription of the AOCs was increased under jasmonic acid (JA treatment. Expression analysis of JA biosynthesis-associated genes between XinWX and XinFLM showed that they were up-regulated during fiber initiation in the fuzzless-lintless mutant. Taken together, jasmonic acid-associated metabolism was related to cotton fiber initiation. Parallel up-regulation of AOCs expression may be important for normal fiber initiation development, while overproduction of AOCs might disrupt normal fiber development.

  18. Lung function impairment in women exposed to biomass fuels during cooking compared to cleaner fuels in Uttar Pradesh, India.

    Science.gov (United States)

    Bihari, Vipin; Iqbal, S M; Srivastava, L P; Kesavachandran, C; Siddique, M J A

    2013-11-01

    A national survey has shown that approximately 75-80% use of fire wood and chips, 10% of dung cake rural women in Uttar Pradesh, India. Considering the respiratory health risk of biomass fuel exposure to women, a cross sectional study was conducted to elucidate the relationship between cooking smoke and lung function impairments. The present study showed significant decline in air flow limitation based on reduced PEFR (3.69 | sec(-1)) and FEV1 (1.34 | sec(-1)) in women cooking with biomass fuels compared to PEFR (4.26 | sec(-1)) and FEV1 (1.73 | sec(-1)) in women cooking with cleaner fuels. The noxious gases and particles generated from biomass fuels during cooking reported in earlier studies may be the reason for the slight decline in airway status PEFR (3.69 | sec(-1)) and lung volumes FEV1 (1.34 | sec(-1)). The higher mean bio-fuels exposure index (52.5 hr-yrs) can attribute to reduced lung function in rural women.

  19. Water Quality Improvement of Media Culture for Tilapia (Oreochromis niloticus) with Cleaner Production Method

    Science.gov (United States)

    Haeruddin; Supriharyono; Febrianto, S.

    2018-02-01

    The tilapia (Oreochromis niloticus), is known as a high adaptability and brackish water tolerance fish. This fish is also has a meat with high protein content, that ranges about 65 -75%. Generally the tilapia is cultured using a conventional system with high density. It is caused degradation of water quality of media culture, and finally increase mortality rate of fish cultured. The application of tilapia cultivation with cleaner production method by giving enzyme into the feed to upgrade the efficiency of feed utilization, presumed that could improve the water quality of cultivation media. It is due to the lower of feed and feces residues. Therefore the concentration of toxic compounds, such as ammonia, nitrite and sulfide, will be lower. The experiments were conducted for 35 days with a completely factorial randomized design. The first factor was the dosage of enzyme in the feed, consisting of 4 dosages, and the second factor was the duration of the test fish maintenance (5 weeks). Water quality variables examined included ammonia, nitrite and sulfide. The results showed that enzyme dosage had no significantly impact on ammonia, nitrite and sulfide concentrations in the test media culture. However, the feeding with enzyme in low dosage, resulted less concentration of ammonia, nitrite and sulfide than it was without enzyme). The duration of fish cultured has significantly effect on the concentration of ammonia, nitrite and sulfide in the test media. While it is no significantly correlation between dosage and duration of maintenance.

  20. Impact of plastic mulching on nitrous oxide emissions in China's arid agricultural region under climate change conditions

    Science.gov (United States)

    Yu, Yongxiang; Tao, Hui; Jia, Hongtao; Zhao, Chengyi

    2017-06-01

    The denitrification-decomposition (DNDC) model is a useful tool for integrating the effects of agricultural practices and climate change on soil nitrous oxide (N2O) emissions from agricultural ecosystems. In this study, the DNDC model was evaluated against observations and used to simulate the effect of plastic mulching on soil N2O emissions and crop growth. The DNDC model performed well in simulating temporal variations in N2O emissions and plant growth during the observation period, although it slightly underestimated the cumulative N2O emissions, and was able to simulate the effects of plastic mulching on N2O emissions and crop yield. Both the observations and simulations demonstrated that the application of plastic film increased cumulative N2O emissions and cotton lint yield compared with the non-mulched treatment. The sensitivity test showed that the N2O emissions and lint yield were sensitive to changes in climate and management practices, and the application of plastic film made the N2O emissions and lint yield less sensitive to changes in temperature and irrigation. Although the simulations showed that the beneficial impacts of plastic mulching on N2O emissions were not gained under high fertilizer and irrigation scenarios, our simulations suggest that the application of plastic film effectively reduced soil N2O emissions while promoting yields under suitable fertilizer rates and irrigation. Compared with the baseline scenario, future climate change significantly increased N2O emissions by 15-17% without significantly influencing the lint yields in the non-mulched treatment; in the mulched treatment, climate change significantly promoted the lint yield by 5-6% and significantly reduced N2O emissions by 14% in the RCP4.5 and RCP8.5 scenarios. Overall, our results demonstrate that the application of plastic film is an efficient way to address increased N2O emissions and simultaneously enhance crop yield in the future.

  1. Nomenclature, variation, and the biological species concept in Lamasina (Lycaenidae: Theclinae: Eumaeini Nomenclatura, variação e o conceito biológico de espécie em Lamasina (Lycaenidae: Theclinae: Eumaeini

    Directory of Open Access Journals (Sweden)

    Robert K. Robbins

    2008-03-01

    Full Text Available The correct generic name for the species that belong to Eucharia Boisduval, 1870, a homonym, is either Annamaria D'Abrera & Bálint, 2001, which has been considered to be unavailable, or Lamasina Robbins, 2002, a replacement name for Eucharia. A recent re-interpretation of the original description of Annamaria was incorrect, and Annamaria is confirmed as being unavailable under Article 13.1 of the Code. A proposed neotype for Papilio ganimedes Cramer, 1775 is invalidated, and a possible syntype is illustrated. Results of an analysis of variation in the Lamasina ganimedes complex are distinctly different from those previously published and provide insufficient evidence to support the hypothesis that L. lathyi (Bálint, 2005 is distinct under a biological species concept. Lamasina lathyi is a synonym of L. ganimedes syn. nov. Statistical evidence overwhelmingly falsifies the published hypothesis that the L. rhaptissima (Johnson, 1991 (14 males and L. columbia (Bálint, 2005 (8 females species complexes are distinct rather than males and females of the same complex. Lamasina columbia is endemic to western Colombia. The hypothesis that L. rhapsodia (Bálint, 2005 from Bolivia is a distinct species is not better supported than the hypotheses that the one known specimen of L. rhapsodia is a geographical variant or an aberrant specimen. Lamasina rhapsodia is a synonym of L. rhaptissima syn. nov. Superficial similarity in ventral wing patterns in genera Paiwarria Kaye, 1904 and Lamasina is noted. A nomenclatural checklist for Lamasina is presented.O nome genérico correto para as espécies de Eucharia Boisduval, 1870, um homônimo, é Annamaria D'Abrera & Bálint, 2001, que tem sido considerado não válido, ou Lamasina Robbins, 2002, um nome substituto para Eucharia. Uma reinterpretação recente da descrição original de Annamaria é considerada incorreta, confirmando a não disponibilidade do nome com base no Artigo 13.1 do Código. O neótipo de

  2. Variation, heritability and association of yield, fiber and morphological traits in a near long staple upland cotton population

    International Nuclear Information System (INIS)

    Shao, D.; Wang, T.; Zhang, H.; Zhu, J.; Tang, F.

    2016-01-01

    Development of near long staple (NLS) cotton germplasm represents a remarkable improvement in fiber properties of upland genotypes without compromising yield potential. This study aimed to evaluate a NLS population for variability in yield, fiber and morphological traits, investigate heritability and genetic advance of these traits, and analyze the interrelationships among them. The NLS lines exhibited large variation for lint yield per hectare and bolls per plant, while little variation for fiber properties. The highest genotypic (GCV) and phenotypic (PCV) coefficient of variation were recorded by lint yield per hectare (25.10%, 23.00%) followed by bolls per plant (18.88%, 16.38%). High heritability along with high response to selection was documented in plant height, bolls per plant and lint yield per hectare indicating that the additive gene function model in the inheritance of these traits and direct selection can be profitably applied on them. Favourable associations were found among fiber length, strength and fineness in this population. It is concluded that there is a great potential in the NSL population for further enhancing yield while maintaining high fiber quality. (author)

  3. Combined exposures to workplace psychosocial stressors: relationships with mental health in a sample of NZ cleaners and clerical workers.

    Science.gov (United States)

    Lilley, R; Lamontagne, A D; Firth, H

    2011-05-01

    A combined measure of two common psychosocial stressors, called job pressure has previously been shown to be strongly associated with poor mental health in high status workers. This study tests the generalizability of this association to lower status workers. A national random sample of cleaners and clerical workers was obtained from the New Zealand (NZ) electoral roll by occupational title (n = 596). Cross-sectional data on job stressors, demographics, and mental health (GHQ-12) was collected by computer-assisted telephone interviews. Combined exposure to low job control, high job demands, and job insecurity (high job pressure) was associated with markedly elevated odds (13-fold or higher) of poor mental health after adjustment for age, sex, occupation, and education. Combined with previous findings this suggests simultaneous exposure to more than one occupational psychosocial stressor may greatly increase the risk of poor mental health among both lower and higher status workers. This report adds to the larger literature in this area, supporting the need for expanded policy and practice intervention to reduce job stressors across the working population. Copyright © 2011 Wiley-Liss, Inc.

  4. Improving China’s Environmental Performance through Adaptive Implementation—A Comparative Case Study of Cleaner Production in Hangzhou and Guiyang

    Directory of Open Access Journals (Sweden)

    Ting Guan

    2014-12-01

    Full Text Available This paper examines local policy implementation of Cleaner Production (CP in China. As the major policy implementer, China’s local government plays a crucial role in promoting CP. A better understanding of the factors affecting local government’s incentives regarding CP and different strategies available to the local government can help policy makers and implementers improve CP practices and other environmental policy outcomes. This paper uses the cases of Hangzhou and Guiyang to demonstrate that local conditions of policy implementation have a direct impact on the success of CP promotion. Based on 35 in-depth interviews, statistical data and internal government reports, we find that the location-based incentives of local government strongly influence their implementation strategies; and that the choices of different strategies can bring out various policy results. From this study, the identified location-based incentives are affected by energy resource endowment, economic development stage and technological competence. The successful implementation strategies involve using different policy instruments synthetically, regulating CP service organizations by controlling their qualifications, differentiating CP subsidizations, and improving transparency of project progress and outcomes.

  5. Evaluation of cleaner production audit in pharmaceutical production industry: case study of the pharmaceutical plant in Dalian, P. R. China

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhi-dong [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China); Zhang, Shu-shen; Zhang, Yun [Dalian University of Technology, Key Laboratory of Industrial Ecology and Environmental Engineering (MOE), School of Environmental Science and Technology, Dalian (China); Zhang, Yong; Wei, Li [Dalian Cleaner Production Centre, Dalian, Liaoning (China); Dalian Municipal Design and Research Institute of Environmental Science, Dalian, Liaoning (China)

    2011-02-15

    The pharmaceutical industry in China makes an important contribution to the national economy. However, the associated pollution problems cause gradual deterioration of the environment and impact adversely on the local community. Cleaner production (CP) technology, an effective way to reduce waste emission and save resources, has been widely employed in the pharmaceutical industry in the developed countries. Such technologies have been applied in a number of factories in China, although there is no integrated assessment and implementation procedure for implementing CP technologies in pharmaceutical plants. To solve such problems, a series of CP options are proposed and assessed here. CP is a powerful tool for decreasing waste production, limiting environmental pollution and natural resource depletion. Moreover, the return on investment in CP is quick, so it would seem that CP activities should be very much in demand by enterprises. Reality is less optimistic: frequently only limited interest is expressed, even after an explanation; business people hesitate to become actively involved. The processes in the pharmaceutical production industry produce a vast amount of waste, including wastewater with high concentrations of organic substances (the principal component), solid waste, and organic off-gas. To solve such problems, a series of CP options are proposed and assessed in this study. Having consideration to environmental impacts and economic efficiency, four groups of medium/high cost CP options were screened in an integrated assessment. To verify the proposed options, a case study was conducted in Degussa Luyuan, Northeast China. The characteristics of resource consumption and waste emission during the production process were identified. The proposed options were evaluated according to different aspects. An integrated CP system based on the proposed options was designed and then implemented in the factory. In three years of practical use, the productivity and

  6. Application of cleaner production tools and failure modes and effects analysis in pig slaughterhourses

    Directory of Open Access Journals (Sweden)

    J. M. Fonseca

    2017-07-01

    Full Text Available Cleaner production programs (CP and Failure Modes and Effects Analysis (FMEA are tools used to improve the sustainability of industries, ensuring greater profitability, quality, reliability and safety of their products and services. The meat industry is among the most polluting industries because of the large amounts of organic waste produced during meat processing. The objective of this study was to combine the CP and FMEA tools and to apply them in a pig slaughterhouse in order to detect critical points along the production chain that have a major environmental impact and to establish corrective and preventive actions that could minimize these problems. The results showed that water is the most consumed resource by the industry and also the main producer of waste due to microbiological contamination with animal feces and blood and meat residues. All impacts were found to be real due to their daily occurrence in the industry. Their severity, occurrence, detection and coverage were classified as moderate and high, high, low and moderate, and moderate and high, respectively. The application of the CP and FMEA tools was efficient in identifying and evaluating the environmental impacts caused by the slaughter and processing of pork carcasses. Liquid slaughter effluents and solid wastes (blood and bones are the factors that pose the greatest risks to the environment. The substitution of treatment plant chemicals with decomposing microorganisms, composting, and the production of animal meal and feed from solid waste are appropriate measures the industry could adopt to minimize the contamination of water resources and soil.

  7. A new cleaner process to prepare pressing-powder

    Directory of Open Access Journals (Sweden)

    Shu, Z.

    2011-10-01

    Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.

    En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

  8. Surface chemistry of a pine-oil cleaner and other terpene mixtures with ozone on vinyl flooring tiles.

    Science.gov (United States)

    Ham, Jason E; Wells, J Raymond

    2011-04-01

    Indoor environments are dynamic reactors where consumer products (such as cleaning agents, deodorants, and air fresheners) emit volatile organic compounds (VOCs) that can subsequently interact with indoor oxidants such as ozone (O(3)), hydroxyl radicals, and nitrate radicals. Typically, consumer products consist of mixtures of VOCs and semi-VOCs which can react in the gas-phase or on surfaces with these oxidants to generate a variety of oxygenated products. In this study, the reaction of a pine-oil cleaner (POC) with O(3) (100ppb) on a urethane-coated vinyl flooring tile was investigated at 5% and 50% relative humidity. These results were compared to previous α-terpineol+O(3) reactions on glass and vinyl surfaces. Additionally, other terpene and terpene alcohol mixtures were formulated to understand the emission profiles as seen in the POC data. Results showed that the α-terpineol+O(3) reaction products were the prominent species that were also observed in the POC/O(3) surface experiments. Furthermore, α-terpineol+O(3) reactions generate the largest fraction of oxygenated products even in equal mixtures of other terpene alcohols. This finding suggests that the judicial choice of terpene alcohols for inclusion in product formulations may be useful in reducing oxidation product emissions. Published by Elsevier Ltd.

  9. Experimental analysis of indoor air quality improvement achieved by using a Clean-Air Heat Pump (CAHP) air-cleaner in a ventilation system

    DEFF Research Database (Denmark)

    Sheng, Ying; Fang, Lei; Nie, Jinzhe

    2017-01-01

    This study investigated the air purification effect of a Clean-Air Heat Pump (CAHP) air-cleaner which combined a silica gel rotor with a heat pump to achieve air cleaning, heating and ventilation in buildings. The experiments were conducted in a field laboratory and compared a low outdoor air...... supply rate with CAHP air purification of recirculated air with three different outdoor air supply rates without recirculation or air cleaning. Sensory assessments of perceived air quality and chemical measurements of TVOC concentration were used to evaluate the air-cleaning performance of the CAHP....... The results of the experiment showed that the operation of the CAHP significantly improved the perceived air quality in a room polluted by both human bio-effluents and building materials. At the outdoor airflow rate of 2 L/s per person, the indoor air quality with CAHP was equivalent to what was achieved...

  10. Cleaner shipping. Trade off between air pollution, costs and refinery CO2 emissions

    International Nuclear Information System (INIS)

    De Wilde, H.P.J.; Kroon, P.

    2008-05-01

    Still subject to final approval in October 2008, the International Maritime Organisation (IMO) agreed on a maximum sulphur content of 0.5% for shipping fuels in 2020. This target will induce major changes in the global refinery industry. We have estimated the impact on the Dutch refinery industry, which annually produces about 8 million tons of heavy fuel oil for sea shipping, with refinery residues as main component. It is technically possible to convert all residues, although this process will cause an additional energy use of about one million tons of crude oil and a related CO2 emission of about 4 million tons. The investment costs for these major changes in the Dutch refinery industry are estimated at about 1.5 tot 2 billion euros. The recent IMO agreement enables a gradual introduction of cleaner shipping fuels, which will reduce market disruptions and peak prices. Nevertheless, Rotterdam may not necessarily be able to develop a similar position in import, export and bunkering of future low sulphur fuels, compared to its present strong position in the market of heavy marine bunkers. Extrapolation of our national study to the global scale suggests that the deep conversion of 350 million tons of heavy fuel oil for shipping would require refinery investments in the order of 70-100 billion euros. The associated CO2 emissions would amount up to 175 Mton. The net additional CO2 emission, however, would be smaller since lighter shipping fuels result in less CO2 emissions at sea. On balance, we expect that the improvements in fuel economy, driven by the expensive low-carbon shipping fuels, will decrease CO2 emissions more than the increase in CO2 emissions from additional desulphurization in the refineries. Nevertheless CO2 emissions from sea shipping will continue to increase since marine transport is rapidly growing

  11. The catalogCleaner: Separating the Sheep from the Goats

    Science.gov (United States)

    O'Brien, K.; Hankin, S. C.; Schweitzer, R.; Koyuk, H.

    2012-12-01

    possible. However, it quickly became obvious, through the sheer volume of data servers available, that the manual process of building a master catalog was not scalable. Thus, the idea for the catalogCleaner tool was born. The goal of this tool is to automatically crawl a remote OPeNDAP or THREDDS server, and from the information in the server build a "clean" catalog of data that will be: a) served through uniform access services; b) have CF compliant metadata; c) directly link the data to common visualization tools thereby allowing users to immediately begin exploring actual data. In addition, the UAF-generated clean catalog can then be used to drive data discovery tools such as Geoportal, GI-CAT, etc. This presentation will further explore the motivation of creating this tool, the implementation of this tool, as well as the myriad of challenges and difficulties there were encountered along the way.

  12. Pojushtshije tela / Eteri Kekelidze

    Index Scriptorium Estoniae

    Kekelidze, Eteri, 1944-

    2007-01-01

    10. apr. Kumu Kunstimuuseumis tantsuteatri Zick esituses etenduvast tantsulavastusest "Piaf", koreograafia ja kujunduse on teinud Dmitri Harchenko, video koostanud Einar Lints, valguskujundus Triin Hook

  13. A means to a cleaner environment: energy efficient platinum-containing fuel cells to be introduced commercially in the early 1990s

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1991-01-01

    The twelfth National Fuel Cell Seminar held in Phoenix, Arizona, U.S.A. from 26th to 28th November 1990, was attended by 450 delegates from 17 countries, representing both developers and potential users worldwide. ''Fuel Cells - An Answer to a Cleaner Environment'' was the key theme running throughout the conference. This was strongly linked to the firm belief that fuel cells would make an important contribution to the world's energy needs over the next ten years as economically viable fuel cell power plants become commercialised. The conference heard that platinum containing phosphoric acid fuel cells (PAFC) are soon to be produced on a commercial basis. Both Fuji and Toshiba announced that they had opened PAFC production facilities in Japan during 1990. The key progress regarding development of Proton Exchange Membrane Fuel Cells (PEMFC) was the announcement of a U.S. Government sponsored programme, to be led to General Motors, to produce a PEMFC powered motor vehicle. The conference reflected the growing extent of the multi-national collaborations that are now underway to develop fuel cell technologies. (author).

  14. Continuous improvement concepts as a link between quality assurance and implementation of cleaner production: Case study in the generic pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    Boltić Zorana

    2016-01-01

    Full Text Available The subject and the research objective presented in this article is establishing of the relationship between quality assurance and implementation of cleaner production in the generic pharmaceutical industry through the comprehensive concept of continuous improvement. This is mostly related to application of Lean and Six Sigma tools and techniques for process improvement and their link to other known concepts used in the industrial environment, especially manufacturing of generic pharmaceutical products from which two representative case studies were selected for comparative analysis, also considering relevant regulatory requirements in the field of quality management, as well as appropriate quality standards. Although the methodology discussed in this conceptual and practice oriented article is strongly related to chemical engineering, the focus is mainly on process industry, i.e. production systems, rather than any specific technological process itself. The scope of this research is an engineering approach to evaluation of the production systems in terms of continuous improvement concepts application, considering both quality aspects and efficiency of such systems. [Projekat Ministarstva nauke Republike Srbije, br. TR 34009

  15. Soil organic carbon loss and selective transportation under field simulated rainfall events.

    Science.gov (United States)

    Nie, Xiaodong; Li, Zhongwu; Huang, Jinquan; Huang, Bin; Zhang, Yan; Ma, Wenming; Hu, Yanbiao; Zeng, Guangming

    2014-01-01

    The study on the lateral movement of soil organic carbon (SOC) during soil erosion can improve the understanding of global carbon budget. Simulated rainfall experiments on small field plots were conducted to investigate the SOC lateral movement under different rainfall intensities and tillage practices. Two rainfall intensities (High intensity (HI) and Low intensity (LI)) and two tillage practices (No tillage (NT) and Conventional tillage (CT)) were maintained on three plots (2 m width × 5 m length): HI-NT, LI-NT and LI-CT. The rainfall lasted 60 minutes after the runoff generated, the sediment yield and runoff volume were measured and sampled at 6-min intervals. SOC concentration of sediment and runoff as well as the sediment particle size distribution were measured. The results showed that most of the eroded organic carbon (OC) was lost in form of sediment-bound organic carbon in all events. The amount of lost SOC in LI-NT event was 12.76 times greater than that in LI-CT event, whereas this measure in HI-NT event was 3.25 times greater than that in LI-NT event. These results suggest that conventional tillage as well as lower rainfall intensity can reduce the amount of lost SOC during short-term soil erosion. Meanwhile, the eroded sediment in all events was enriched in OC, and higher enrichment ratio of OC (ERoc) in sediment was observed in LI events than that in HI event, whereas similar ERoc curves were found in LI-CT and LI-NT events. Furthermore, significant correlations between ERoc and different size sediment particles were only observed in HI-NT event. This indicates that the enrichment of OC is dependent on the erosion process, and the specific enrichment mechanisms with respect to different erosion processes should be studied in future.

  16. Effect of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L.

    Directory of Open Access Journals (Sweden)

    A. Zare Feizabadi

    2016-04-01

    Full Text Available In order to compare of ecological management of weed control on economical income, yield and yield components of cotton (Gossypium hirsutum L., a Randomized Complete Block design with 12 treatments and four replications was conducted in Mahvelat of Khorasan Razavi province, Iran. Treatments consisted of weeding, harrowing, burning, two times weeding, weeding + harrowing, weeding + burning, harrowing + harrowing, harrowing + weeding, harrowing + burning, weeding+ harrowing+ burning, weed free and weedy as a check treatment. Investigated traits were plant height, number of boll in plant, 20 boll weight, 20 boll cotton lint weight, cotton lint yield per plant, cotton yield, number and biomass of weeds, outcome, net and gross income. The result showed that treatments had significant effect (p

  17. EFEITO DA IRRIGAÇÃO NO RENDIMENTO E QUALIDADE DE FIBRAS EM CULTIVARES DE ALGODOEIRO HERBÁCEO

    Directory of Open Access Journals (Sweden)

    JOÃO HENRIQUE ZONTA

    2015-01-01

    Full Text Available This study was conducted to evaluate seed cotton yield, fiber yield, and fiber quality traits of cotton cultivars grown under different irrigation levels in Brazil. The experiment was conducted over two years in the region of Apodi – RN, with sprinkler irrigation. Treatments comprised of 4 irrigation levels i.e., 130, 100, 70 and 40 % of the crop evapotranspiration (ETc and 4 cotton cultivars i.e., FiberMax 993, BRS 286, BRS 336 and BRS 335. The experimental design was factorial with randomized complete block design and four replicates. Yield, lint percent and fiber quality traits determined were evaluated. Different responses were observed for cultivars at various irrigation levels. Cultivars grown under limited irrigation exhibited a decline in the seed cotton yield, lint percent, and fiber quality. Cultivars with the highest yield and lint percent were FiberMax 993 and BRS 286. Within irrigation level of 40 % ETc, the medium fiber cultivars produced short fibers whereas the long fiber cultivar, BRS 336, produced medium fiber length. Overall, the different levels of water deficits did not significantly affect fiber quality of the four cultivars tested as all fiber quality traits re- mained acceptable for the domestic textile industry.

  18. Fueling our future: four steps to a new, reliable, cleaner, decentralized energy supply based on hydrogen and fuel cells

    International Nuclear Information System (INIS)

    Evers, A.A.

    2004-01-01

    'Full text:' This manuscript demonstrates the possible driving factors and necessary elements needed to move Hydrogen and Fuel Cells (H2/FC) to worldwide commercialisation. Focusing not only on the technology itself, we look at the 'bigger picture' explaining how certain trends have impacted the progress of new technologies developments in the past. In this process, the consumer has played and will continue to play the key and leading role. We also examine different Distributed Generation scenarios including distributed generation via fuel cells for automotive applications which may be the catalyst to the Hydrogen Economy. One possible step could be the use of Personal Power Cars equipped with Fuel Cells which not only drive on Hydrogen, but also supply (while standing) electricity /heat to residential and commercial buildings. With 1.3 billion potential customers, P.R. China is one country where such a scenario may fit. The up-and-coming Chinese H2/FC industry deals with applied fundamental research such as advances in Hydrogen production from Natural Gas, Methanol and Gasoline. The current activities in P.R. China certain to further accelerate the trend towards the coming Hydrogen Economy, together with the steps necessary to achieve a new reliable, cleaner and decentralized Energy Supply based on H2/FC are examined. (author)

  19. Catalysts for cleaner combustion of coal, wood and briquettes sulfur dioxide reduction options for low emission sources

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.V. [Global Environmental Solutions, Inc., Morton Grove, IL (United States)

    1995-12-31

    Coal fired, low emission sources are a major factor in the air quality problems facing eastern European cities. These sources include: stoker-fired boilers which feed district heating systems and also meet local industrial steam demand, hand-fired boilers which provide heat for one building or a small group of buildings, and masonary tile stoves which heat individual rooms. Global Environmental Systems is marketing through Global Environmental Systems of Polane, Inc. catalysts to improve the combustion of coal, wood or fuel oils in these combustion systems. PCCL-II Combustion Catalysts promotes more complete combustion, reduces or eliminates slag formations, soot, corrosion and some air pollution emissions and is especially effective on high sulfur-high vanadium residual oils. Glo-Klen is a semi-dry powder continuous acting catalyst that is injected directly into the furnace of boilers by operating personnel. It is a multi-purpose catalyst that is a furnace combustion catalyst that saves fuel by increasing combustion efficiency, a cleaner of heat transfer surfaces that saves additional fuel by increasing the absorption of heat, a corrosion-inhibiting catalyst that reduces costly corrosion damage and an air pollution reducing catalyst that reduces air pollution type stack emissions. The reduction of sulfur dioxides from coal or oil-fired boilers of the hand fired stoker design and larger, can be controlled by the induction of the Glo-Klen combustion catalyst and either hydrated lime or pulverized limestone.

  20. Plaadid / Margit Tõnson

    Index Scriptorium Estoniae

    Tõnson, Margit, 1978-

    2005-01-01

    Uutest heliplaatidest Metro Luminal "Reboot", Rannap, Rein "Tantsib klaveril", Hüpnosaurus "Lint nr 33", Eminem "Encore", Marianne Faithfull "Before the Poision", Aerosmith "You Gotta move", Evanescence "Anywhwre but Home"

  1. Power ultrasound-assisted cleaner leather dyeing technique: influence of process parameters.

    Science.gov (United States)

    Sivakumar, Venkatasubramanian; Rao, Paruchuri Gangadhar

    2004-03-01

    The application of power ultrasound to leather processing has a significant role in the concept of "clean technology" for leather production. The effect of power ultrasound in leather dyeing has been compared with dyeing in the absence of ultrasound and conventional drumming. The power ultrasound source used in these experiments was ultrasonic cleaner (150 W and 33 kHz). The effect of various process parameters such as amount of dye offer, temperature, and type of dye has been experimentally found out. The effect of presonication of dye solution as well as leather has been studied. Experiments at ultrasonic bath temperature were carried out to find out the combined thermal as well as stirring effects of ultrasound. Dyeing in the presence of ultrasound affords about 37.5 (1.8 times) difference as increase in % dye exhaustion or about 50% decrease in the time required for dyeing compared to dyeing in the absence of ultrasound for 4% acid red dye. About 29 (1.55 times) increase in % dye exhaustion or 30% reduction in time required for dyeing was observed using ultrasound at stationary condition compared with conventional dynamic drumming conditions. The effect of ultrasound at constant temperature conditions with a control experiment has also been studied. The dye exhaustion increases as the temperature increases (30-60 degrees C) and better results are observed at higher temperature due to the use of ultrasound. Presonication of dye solution or crust leather prior to the dyeing process has no significant improvement in dye exhaustion, suggesting ultrasound effect is realized when it is applied during the dyeing process. The results indicate that 1697 and 1416 ppm of dye can be reduced in the spent liquor due to the use of ultrasound for acid red (for 100 min) and acid black (for 3 h) dyes, respectively, thereby reducing the pollution load in the effluent stream. The color yield of the leather as inferred from the reflectance measurement indicates that dye offer can

  2. African Journal of Biotechnology - Vol 10, No 44 (2011)

    African Journals Online (AJOL)

    The effect of zinc application methods on seed cotton yield, lint and seed quality of ... Management of Meloidogyne incognita in nematodesusceptible watermelon ... Waste cooking oil transesterification: Influence of impeller type, temperature, ...

  3. A study on the optimal design of a cyclone system for vacuum cleaner with the consideration of house dust

    International Nuclear Information System (INIS)

    Ha, Gun Ho; Kim, Eung Dal; Kim, Young Soo; Lee, Jae Keun; Ahn, Young Chull; Kim, Dong Gyu

    2011-01-01

    Cyclone, a type of particle collector widely used in the field of ambient sampling and industrial particulate control, is the principal type of gas-solids separator that use a centrifugal force. The goal of this study is to transform conventional cyclone into a new type of cyclone that can be used for the household vacuum cleaners. To meet the goal, first, the analysis about local environment and dust is carried out. Second, it must have enough high-efficiency not to reduce suction power due to clogging of exhaust filter unit. Two single cyclones with central-hopper-dust-outlet and side-wall-dust-outlet and a twin cyclone are designed and fabricated to evaluate, and compare, their dust collection efficiencies and pressure drops. The measurements of separation efficiency for dust by using DMT test dust type 08 are carried out. House dust experiment is additionally performed to check the local matters applicability such as tissue papers, fur and hairs. The collection efficiency of the twin cyclone is found to be 3-6% greater than those of two single cyclones with the same body diameter, inlet and inner cylinder diameter. Twin cyclone with a large body diameter, a small inner cylinder diameter, a short inner cylinder, a narrow inlet has high separation efficiency. This result indicates the possibility of achieving higher collection efficiencies with a twin cyclone

  4. Effects of internal phosphorus loadings and food-web structure on the recovery of a deep lake from eutrophication

    Science.gov (United States)

    Lepori, Fabio; Roberts, James J.

    2017-01-01

    We used monitoring data from Lake Lugano (Switzerland and Italy) to assess key ecosystem responses to three decades of nutrient management (1983–2014). We investigated whether reductions in external phosphorus loadings (Lext) caused declines in lake phosphorus concentrations (P) and phytoplankton biomass (Chl a), as assumed by the predictive models that underpinned the management plan. Additionally, we examined the hypothesis that deep lakes respond quickly to Lext reductions. During the study period, nutrient management reduced Lext by approximately a half. However, the effects of such reduction on P and Chl a were complex. Far from the scenarios predicted by classic nutrient-management approaches, the responses of P and Chl a did not only reflect changes in Lext, but also variation in internal P loadings (Lint) and food-web structure. In turn, Lint varied depending on basin morphometry and climatic effects, whereas food-web structure varied due to apparently stochastic events of colonization and near-extinction of key species. Our results highlight the complexity of the trajectory of deep-lake ecosystems undergoing nutrient management. From an applied standpoint, they also suggest that [i] the recovery of warm monomictic lakes may be slower than expected due to the development of Lint, and that [ii] classic P and Chl a models based on Lext may be useful in nutrient management programs only if their predictions are used as starting points within adaptive frameworks.

  5. 7 CFR 718.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... sterile high-sugar corn that follows the standard planting and harvesting practices for corn for the area... purposes, brown lint cotton is considered upland cotton. Wheat means wheat for feed or dual purpose variety...

  6. Assessment of occupational injuries in Tendaho Agricultural ...

    African Journals Online (AJOL)

    Bernt Lindtjorn

    oldest public owned agricultural enterprises mainly producing lint cotton. ... contingency for non-response and correcting for finite ..... workers per year in small and medium scale industrial workers .... An ILO perspective, African news letter on.

  7. Influence Factors of Willingness to Pay for Vegetable Cleaner Production Technology Subsidies: Taking the Questionnaire Investigation on the Application of Vegetable Residue Composting Technology as an Example

    Directory of Open Access Journals (Sweden)

    ZHOU Ying

    2016-05-01

    Full Text Available Currently, producing the safe, high quality and nutritious vegetable products has become the common goal of the food producers and consumers. In doing so, Chinese government vigorously promotes clean production technology of vegetables for the source control and production process control. Unfortunately, lots of vegetables residues are still thrown away after the harvest, which has caused severe environmental pollution in producing areas. Vegetable waste composting technology, an important technology of vegetable cleaner production, has low requirements for technology conditions and is suitable for the promotion of rural households. But it needs additional investment costs including retting pond construction costs during application process and its personal income is less than the social benefits brought by the technology itself, which makes it difficult to mobilize the enthusiasm of farmers to adapt cleaner technology and the technology promotion is not smooth. It is of great and practical significance to investigate the influence mechanism of technology application, assess subsides policy effectiveness and encourage farmers environmentally and friendly produce behavior. The goal of this study is thus to use the contingent valuation method(CVM to understand the farmers' willingness to subsidize for heap retting pool construction fee and to analyze the direction and intensity of influence factors of willingness to pay(WTP by using a Logistic econometric model and the 142 questionnaires in Gaocheng City of Hebei Province. The results indicated that the direct cost of production and operation was an important factor to affect the WTP of technology subsidies and individual labor time and social relationship were the internal control factors that affects the WTP, while the policy measures based on technology subsidies was an important factor to affect the WTP and environmental cognition factor of soil pollution presented a reverse relationship with

  8. Never Say Dye: The Story of Coloured Cotton

    Indian Academy of Sciences (India)

    cadmium, cobalt, zinc, chromium, are also skin irritants. Chil- dren are especially ... factors, especially sunlight, soil nutrition, and soil type. Scien- tists at Dharwad .... agricultural produce, its contamination with colour lint may have disastrous ...

  9. Tudengite hea esinemine Willem C. Vis'i nimelisel harjutuskohtuvõistlusel

    Index Scriptorium Estoniae

    2013-01-01

    XX Willem C. Vis’i nimelise rahvusvahelise kaubandusõiguse harjutuskohtuvõistlusel Viinis saavutas Tartu Ülikooli õigusteaduskonna võistkond (Kristina Promet, Jaana Lints, Edgar-Kaj Velbri ja Sandra-Kristin Noot) 290 ülikooli seast 84. koha

  10. Cotton Water Use Efficiency under Two Different Deficit Irrigation Scheduling Methods

    Directory of Open Access Journals (Sweden)

    Jeffrey T. Baker

    2015-08-01

    Full Text Available Declines in Ogallala aquifer levels used for irrigation has prompted research to identify methods for optimizing water use efficiency (WUE of cotton (Gossypium hirsutum L. In this experiment, conducted at Lubbock, TX, USA in 2014, our objective was to test two canopy temperature based stress indices, each at two different irrigation trigger set points: the Stress Time (ST method with irrigation triggers set at 5.5 (ST_5.5 and 8.5 h (ST_8.5 and the Crop Water Stress Index (CWSI method with irrigation triggers set at 0.3 (CWSI_0.3 and 0.6 (CWSI_0.6. When these irrigation triggers were exceeded on a given day, the crop was deficit irrigated with 5 mm of water via subsurface drip tape. Also included in the experimental design were a well-watered (WW control irrigated at 110% of potential evapotranspiration and a dry land (DL treatment that relied on rainfall only. Seasonal crop water use ranged from 353 to 625 mm across these six treatments. As expected, cotton lint yield increased with increasing crop water use but lint yield WUE displayed asignificant (p ≤ 0.05 peak near 3.6 to 3.7 kg ha−1 mm−1 for the ST_5.5 and CWSI_0.3 treatments, respectively. Our results suggest that WUE may be optimized in cotton with less water than that needed for maximum lint yield.

  11. Application of an automatic yarn dismantler to track changes in cotton fiber properties during full scale processing of cotton into carded yarn

    CSIR Research Space (South Africa)

    Fassihi, A

    2016-08-01

    Full Text Available Changes in Upland cotton fiber properties from lint to carded yarn, during full scale processing, were tracked, using a newly developed automatic yarn dismantler for dismantling short staple ring-spun yarns. Opening and cleaning increased fiber neps...

  12. The unattached fraction of radon decay products: Potential effects of in-home air cleaners on lung cancer risk

    International Nuclear Information System (INIS)

    Brady, P.A.

    1991-01-01

    Radon decay products are a factor in the development of lung cancer. Because of their efficient deposition within the lung, the fraction of decay products not attached to particulate (i.e., the unattached fraction) is very important in lung dosimetry. This study simulated the use of two in-home air cleaning devices to reduce airborne particulate concentrations, measure the effect on the unattached fraction, and estimate the radon lung cancer risk. Radon was released into a chamber having a volume-to-surface-area ratio similar to a small home. At radon-decay product equilibrium, radon and airborne particle concentrations were measured, and the concentration of the unattached fraction was estimated. The effect of particle concentration on the unattached fraction was then determined. The average unattached fractions corresponding to the particle concentration ranges expected for the air cleaning devices were used to calculate the annual alpha radiation dose and annual radon lung cancer for men, women and children at rest and under light activity. The annual doses and related risks were compared to those used in the models published by the Environmental Protection Agency. For particulate concentrations of a home with no particulate generating activities (e.g., smoking, cooking), the electronic air cleaner is predicted to reduce the unattached fraction from seven percent (the value used by the NCRP and confirmed in this study) to four percent. These conditions represent the maximum reduction in the unattached fraction. The decrease in the unattached fraction is tentatively attributed to an increase in plateout. Based on these results, a reduction of less than ten percent in the calculated annual lung cancer risk is found in all cases

  13. Upland cotton growth and yield response to timing the initial postplant irrigation

    International Nuclear Information System (INIS)

    Steger, A.J.; Silvertooth, J.C.; Brown, P.W.

    1998-01-01

    Cotton (Gossypium spp.) production in arid and semiarid regions depends on well-managed irrigation systems for optimum yield and production efficiency. Water deficit stress early in the growing season can affect the subsequent growth and development of short-season cotton. A 2-yr field study was conducted in southern Arizona to determine the optimum timing of the initial postplant irrigation for a short-season upland cotton variety based on midday leaf water potential (LWP) measurements, and to evaluate the season-long effects of delayed irrigation on subsequent plant growth patterns. In both years, the short-season upland variety, DPL 20, was planted into a Pima clay loam soil [fine-silty, mixed (calcareous), thermic Typic Torrifluvent] that had received a preplant irrigation of 152 (1993) or 254 mm (1994) approximately 3 wk prior to planting. Treatments, designated T1, T2, and T3, received the initial postplant irrigation when the average midday LWP of the uppermost, fully expanded leaf measured −1.5, −1.9, and −2.3 MPa, respectively. Daily midday LWP measurements were taken using the pressure chamber technique. Soil water was measured at 25-cm depth increments using neutron attenuation. Plant height, number of mainstem nodes, nodes above white flower (NAWF), and canopy closure were measured at weekly intervals. All treatments reached maturity, as measured by NAWF ≤ 5, at approximately the same time during the growing season. Complete canopy closure was delayed in the T3 plots resulting in reduced interception and utilization of available solar radiation early in the growing season. When treatments were initiated, approximately 84% (T1), 62% (T2), and 32% (T3) of the total plant-available water (field capacity less permanent wilting point) was present in the upper 1.5 of the soil profile. Yields were 1263, 1244, and 1110 kg lint ha−1 in 1993 and 1229, 1176, and 1095 kg lint ha −1 in 1994 for T1, T2, and T3, respectively. Lint yields were significantly

  14. Botanical trash mixtures analyzed with near-infrared and attenuated total reflectance fourier transform spectroscopy and thermogravimetric analysis

    Science.gov (United States)

    Botanical cotton trash mixed with lint reduces cotton’s marketability and appearance. During cotton harvesting, ginning, and processing, trash size reduction occurs, thus complicating its removal and identification. This trash causes problems by increasing ends down in yarn formation and thus proce...

  15. 7 CFR 1427.101 - Eligible upland cotton.

    Science.gov (United States)

    2010-01-01

    ... classification purposes that have been rebaled; (3) Semi-processed motes that are of a quality suitable, without further processing, for spinning, papermaking, or production of non-woven fabric; or (4) Re-ginned... derivatives of the lint cleaning process; or (3) Textile mill wastes. ...

  16. Eesti keele huvi tõi ungari tudengid Tartusse / Sander Liivak

    Index Scriptorium Estoniae

    Liivak, Sander

    2003-01-01

    Tartu Ülikoolil on üliõpilasvahetussuhted Budapestis asuva Lorind Eötvösi ülikooliga. Tartus viibivad Edina Csüllög, Bálint Kirpithegyi ja Zoltin Ság 11. aprilli "Õpetajate Lehes" tutvustati Edinat, seekord lähemalt noormeestest

  17. Productivity and resource use in cotton and wheat relay intercropping

    NARCIS (Netherlands)

    Zhang, L.

    2007-01-01

    Keywords: Grain yield; lint yield; phenological delay; light use; nitrogen use; resource use efficiency; modelling; profitability; water productivity. From the early 1980s onwards, farmers in the Yellow River cotton producing region intercropped cotton and winter wheat; currently on more than 60% of

  18. Evaluation of Alternative Peel Ply Surface Preparation Methods of SC-15 Epoxy / Fiberglass Composite Surfaces for Secondary Bonding

    Science.gov (United States)

    2014-01-01

    prepared composite surfaces. Examination of the surface compositions will show differences in makeup and identify any transfer of contaminants...by carefully brushing the specimen with a lint-free cloth followed by a high-pressure nitrogen gas stream. 3.2 X-ray Photospectroscopy (XPS

  19. The Effect of Rate and Application Method of Potassium on Yield and Yield Components of Cotton in Saline Condition

    Directory of Open Access Journals (Sweden)

    A Ardakani

    2016-12-01

    flowering (25P+25V+50F, and 25% at planting+50% at vegetative stage and 25%at early boll development (25P+50V+25B as the subplot. The seeds planted had been acid-delinted and treated with chemicals against seed and seedling diseases. Plots consisted of six rows spaced 0.5 min row and 0.2 m in plant (10 plants m-2 and 6 m in length. To evaluate yield components of cotton including plant height, sympodial branch number, boll number, boll weight, 10 individual plants were selected randomly from final harvest area. At harvesting time one meter square from the beginning and a half meter around each plot was removed as a marginal effect. The remaining area was harvested by hand for determine of lint and biological yield. Seed-cotton samples were ginned to separate the fiber (lint from the seed. Lint percentage (% was calculated as the weight of lint to weight of the seed-cotton. The statistical analyses were performed by SAS software Ver. 9.1. The mean separation was done through Fischer least significant difference (FLSD test at alpha 0.05. Results and Discussion Analysis of variance showed that boll weight, seed cotton yield and biological yield were significantly affected by potassium rate, whereas plant height, number of sympodial branch, boll number and lint percentage was not affected by potassium rate. All traits were affected by potassium application method except plant height and lint percentage. Plant height, boll weight, seed cotton yield and lint percentage were affected by interaction of potassium rate and application method. Increasing of K level up to 150 kg ha-1 increased boll weight (23.64%, seed cotton yield (17.67%, and biological yield (9.86% in comparison with the application of 75 kg ha-1. Plant height, sympodial branch number and lint percentage did not respond to K rate. K application as 25% at planting+25% at vegetative stage (5-8 leaves stage, 25% at first flowering and 25% at early boll development (25P+25V+25F+25B had the highest boll weight, seed

  20. Neck pain and postural balance among workers with high postural demands - a cross-sectional study

    DEFF Research Database (Denmark)

    Jørgensen, Marie B.; Skotte, Jørgen H.; Holtermann, Andreas

    2011-01-01

    Neck pain is related to impaired postural balance among patients and is highly prevalent among workers with high postural demands, for example, cleaners. We therefore hypothesised, that cleaners with neck pain suffer from postural dysfunction. This cross-sectional study tested if cleaners with neck...... pain have an impaired postural balance compared with cleaners without neck pain. Postural balance of 194 cleaners with (n = 85) and without (N = 109) neck pain was studied using three different tests. Success or failure to maintain the standing position for 30 s in unilateral stance was recorded...... to cleaners without neck/low back pain (p balance, measured as CEA (p

  1. Phosphorus application to cotton enhances growth, yield, and quality characteristics on a sandy loam soil

    International Nuclear Information System (INIS)

    Ahmad, M.; Ranjha, A.M.

    2009-01-01

    Phosphorus (P) is the second most limiting nutrient in cotton (Gossypium hirsutum L.) production after nitrogen. Under wheat-cotton cropping system of Pakistan most of the farmers apply P fertilizer only to wheat crop. A field experiment was conducted to evaluate the effect of fertilizer P on the growth, yield and fibre quality of cotton on a sandy loam calcareous soil at farmer's field in cotton growing area of district Khanewal, Punjab. Five levels of P (0, 17, 26, 34 and 43 kg P ha /sup -1/) along with 120 kg N and 53 kg K ha/sup -1/ were applied. The response of cotton growth parameters was greater than quality components to P addition in calcareous soil. There was significant increase in the growth and yield parameters with each additional rate of P. The response of number of bolls per plant, boll weight and seed cotton yield was to the tune of 88.23, 16.82 and 42%, respectively at P application rate of 34 kg ha/sup -1/. Cotton quality components (lint %age, fiber length and fiber strength) improved from 2 to 5% where 43 kg P ha/sup -1/ was added. The lint and seed P concentration was little affected by P application as compared to stem and leaves showing its essentiality for cell division and development of meristematic tissue. Phosphorus use, thus not only valuable for wheat crop but also its application to cotton crop is of vital importance in improving both lint yield and quality. (author)

  2. Neck pain and postural balance among workers with high postural demands - a cross-sectional study

    Science.gov (United States)

    2011-01-01

    Background Neck pain is related to impaired postural balance among patients and is highly prevalent among workers with high postural demands, for example, cleaners. We therefore hypothesised, that cleaners with neck pain suffer from postural dysfunction. This cross-sectional study tested if cleaners with neck pain have an impaired postural balance compared with cleaners without neck pain. Methods Postural balance of 194 cleaners with (n = 85) and without (N = 109) neck pain was studied using three different tests. Success or failure to maintain the standing position for 30 s in unilateral stance was recorded. Participants were asked to stand on a force platform for 30 s in the Romberg position with eyes open and closed. The centre of pressure of the sway was calculated, and separated into a slow (rambling) and fast (trembling) component. Subsequently, the 95% confidence ellipse area (CEA) was calculated. Furthermore a perturbation test was performed. Results More cleaners with neck pain (81%) failed the unilateral stance compared with cleaners without neck pain (61%) (p neck pain in comparison with cleaners without neck pain in the Romberg position with eyes closed, but not with eyes open. Conclusions Postural balance is impaired among cleaners with neck pain and the current study suggests a particular role of the slow component of postural sway. Furthermore, the unilateral stance test is a simple test to illustrate functional impairment among cleaners with concurrent neck and low back pain. Trial registration ISRCTN96241850 PMID:21806796

  3. Transcriptional Profiling in Cotton Associated with Bacillus Subtilis (UFLA285) Induced Biotic-Stress Tolerance

    Science.gov (United States)

    Abstract Lint yield and quality in cotton is greatly affected by water-deficit stress. The principal aim of this study was to identify cotton genes associated metabolic pathways involved in the water-deficit stress response. Gene expression profiles were developed for leaf and root tissues subject...

  4. "Rändkeha" loomine Pärnus / Heili Einasto

    Index Scriptorium Estoniae

    Einasto, Heili

    2007-01-01

    Rahvusvahelisest tantsuprojektist "The Migrant Body" ("Rändkeha"). Projektis osalevad viie maa (Eesti, Itaalia, Rumeenia, Hollandi, Inglismaa) koreograafid ja tantsijad rändavad tantsukava koostades ühest riigist teise. Eesti poolt osalevad projektis tantsija Einar Lints, produtsent, koreograaf Teet Kask, fotograaf-videokunstnik Mark Raidpere ja artikli autor

  5. Enhancing the competitiveness of an SMME in the automotive industry through the introduction of laser based manufacturing. A case study

    CSIR Research Space (South Africa)

    Burger, HP

    2006-01-01

    Full Text Available to synthetic fibre the cut is produced by melting the individual fibres resulting in a semi sealed cut edge that is totally free of fraying and lint. This paper illustrates how the introduction of laser cutting into the manufacturing process not only solved...

  6. on the genetic relationships among t

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-05

    Oct 5, 2009 ... Establishment and prebloom irrigations affect total yield, but water ... For most major food ... avoidance is performed by maintenance of turgor through .... Productivity of cotton populations selected for lint yield under dry land and irrigated ... according to the manufacturer's supplied protocol, starting with 225.

  7. Fourier transform infrared macro-imaging of botanical cotton trash

    Science.gov (United States)

    The marketability of cotton fiber is directly tied to the trash comingled with it. Trash can contaminate cotton during harvesting, ginning, and processing. Thus, the removal of trash is important from field to fabric. An ideal prerequisite to removing trash from lint is identifying what trash types...

  8. Estrutura organizacional para a difusão da produção mais limpa: uma contribuição da metodologia seis sigma na constituição de redes intra-organizacionais Organizational structure for cleaner production diffusion: a contribution of the six sigma methodology to the creation of intra-organizational networks

    Directory of Open Access Journals (Sweden)

    Rogério Cerávolo Calia

    2006-12-01

    Full Text Available A "Produção Mais Limpa" é uma metodologia criada para aumentar a sustentabilidade ambiental das manufaturas. Devido a sua importância para o desenvolvimento sustentável, a Produção Mais Limpa foi amplamente promovida pela Organização das Nações Unidas e por diversas redes de organizações visando à difusão desta metodologia. No entanto, após mais de dez anos de atuação, estas redes para a difusão da Produção Mais Limpa têm se confrontado com significativas e recorrentes barreiras organizacionais que limitam seu desempenho. Utilizando-se do referencial teórico de "organizações em rede" no contexto da inovação, este artigo se baseia num aprofundado estudo de caso sobre uma estrutura organizacional em rede dentro de uma empresa multinacional que opera dezenas de manufaturas em diversos países. Esta empresa triplicou o desempenho ambiental em toneladas de poluição prevenidas e multiplicou em oito vezes o número de projetos de Produção Mais Limpa bem sucedidos, após ter implementado uma estrutura organizacional em rede para aumentar sua capacidade de gerenciar projetos para a melhoria de processos. Para explicar os motivos de tal aumento de desempenho ambiental, o artigo utiliza a metodologia de modelagem organizacional Enterprise Knowledge Development (EKD para descrever as interações entre os objetivos, regras e processos do Programa de Produção Mais Limpa desta corporação, assim como as suas estruturas de relacionamento entre os atores que viabilizaram a integração das competências necessárias para a geração de uma maior capacidade de inovação ambientalmente sustentável nas manufaturas.Cleaner Production is a methodology to improve environmental sustainability in manufacturers. Due to its importance for sustainable development, the United Nations and many regional networks have taken on the responsibility to diffuse Cleaner Production methodology. After more than ten years of activity, however, these

  9. Cleaning symbiosis as an evolutionary game: To cheat or not to cheat?

    Science.gov (United States)

    Poulin; Vickery

    1995-07-07

    Cleaning symbiosis is an apparently mutualistic relationship, occurring in diverse taxa, in which cleaners remove ectoparasites from the body of their clients. Here its evolution is explored with a simple game theory model in which both participants play against each other using either honest or cheating strategies. Honest clients pose for cleaners and have their ectoparasites removed, cheating clients eat the cleaners. Honest cleaners eat their clients' ectoparasites, cheating cleaners feed mainly on client tissues. The conditions that favour either strategy are obtained when the game is resolved: (i) the cost of being cleaned by a cheat and the proportion of cheats in the cleaner population determine the relative value of honesty in clients, and (ii) the advantages of being an honest cleaner depend on the relative fitness value of ectoparasites as food versus client tissues. A scenario for the origin of the cleaning symbiosis can also be derived from the model, in which the specialization of both participants need not be simultaneous. The model is based on the relationship between specialized cleaner fish and their client fish on coral reefs, but its conclusions are used in an examination of other cleaning associations. Copyright 1995 Academic Press Limited

  10. Jewelry cleaners

    Science.gov (United States)

    ... care professional. If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes. If the chemical was swallowed, immediately give the person water or milk, unless instructed otherwise by a health care provider.

  11. Contamination sources, prevention, and research

    Science.gov (United States)

    Contamination is defined as anything other than cotton in cotton lint. Worldwide, contamination is on the rise and plastic contamination has increased at a faster rate than contamination overall. In the U.S., there are many sources of plastic contaminants, such as plastic trash that collects in cott...

  12. The second lumbrical-interossei latency difference in carpal tunnel ...

    African Journals Online (AJOL)

    All were subjected to routine median motor nerve conduction study with stimulation at midpalm, wrist and elbow, median-versus-radial sensory comparison study and Second lumbrical-versus-interosseus (2L-INT) motor comparison study. Results: The results showed that the most sensitive tests were the median-radial ...

  13. Marketing policies and economic interests in the cotton sector of Kenya

    NARCIS (Netherlands)

    Dijkstra, T.

    1990-01-01

    This report, which is based on field research carried out in 1988, examines the marketing arrangements for raw cotton, cotton lint and cotton seed in Kenya, as well as the relationships and conflicts between the actors involved. The report starts with the history of cotton production and marketing

  14. Fourier transform infrared imaging of Cotton trash mixtures

    Science.gov (United States)

    There is much interest in the identification of trash types comingled with cotton lint. A good understanding of the specific trash types present can lead to the fabrication of new equipment which can identify and sort cotton trash found with cotton fiber. Conventional methods, including the High Vo...

  15. Relationship between three cotton trash measurements: High Volume Instrumentation (HVI), Shirley Analyzer (SA), and Advanced Fiber Information System (AFIS)

    Science.gov (United States)

    Presence of non-lint materials (trashes) in commercial cotton bales at various amounts degrades the market values and further influences the end-use qualities. In order to ensure a fair trading, the USDA’s AMS has introduced the high volume instrument (HVI) measurement as a universal standard index....

  16. Impacts of Ridge-Furrow Planting on Salt Stress and Cotton Yield under Drip Irrigation

    Directory of Open Access Journals (Sweden)

    Chitao Sun

    2017-01-01

    Full Text Available Flat (F, mini-ditch (MD, and ridge-furrow (RF are three conventional cotton planting patterns that are usually adopted around the world, yet soil and crop responses to these three patterns are poorly studied, as is their suitability for increasing yield for coastal areas in Eastern China. The effects of three planting methods on water and salt dynamics as well as on growth and lint yield of cotton (Gossypium hirsutum L. were investigated in a saline field in Bohai Rim, China, to select the best planting pattern for cultivating coastal saline fields of Eastern China. Soil moisture in the root zone with RF was 11.9% and 12.1% higher than with F and MD, whereas the electrical conductivity of a saturated soil extract (ECe in the root zone with RF was 18.0% and 13.8% lower than with MD and F, respectively, during the growth period, which indicated that RF could efficiently collect rainfall and leach salt in the root zone. After drip irrigation, the infiltration and salt-leaching depth with RF were both deeper than that with F and MD. The stand establishment of MD was the highest (80.3% due to the greenhouse effect from film mulching, and was 12.8% and 4.6% higher than that with F and RF, respectively. Growth indicators and lint yield demonstrated that RF was superior to F and MD because of the higher soil moisture and lower ECe. The lint yield was significantly higher in RF, suggesting that RF can be an optimal planting pattern for agricultural reclamation in similar saline-alkaline areas around the world.

  17. Creation and evaluation of best cotton mutant lines

    International Nuclear Information System (INIS)

    Rastegari, S. J.; Hosseini, Z.

    2001-01-01

    During (1997-1999) a study was carried out to recognize the best mutant lines, which were already obtained from a mutation breeding project. A Triple Rectangular Latis Design (8 7) in form of randomized complete blocks (RCB) with fifty- six treatments and three replications, were used in Estahban, Kordkouy and Varamin, under different ecological conditions, rainfall (Kordkouy) desert (Varamin) hot and dry (Estahban). During growing season some important morphological characteristics were recorded. Some lines had specific characters, for example: line 3191 (Chirpan 150 gray) had a low leaf number per plant, line 3169 (Bakhtegan 200 gray) plants were clustered. The results of the data in Varamin station showed that Bakhtegan irradiated with 150 gray line 3485 and Tashkand with 300 gray line 3451 compared to check (Varamin with 4373 kg/ha) had highest yield with 4942 kg/ha, and 4871 kg/ha respectively. In view of boll weight line 3405 of Sahel irradiated with 200 gray had highest boll weight (6.5 g/boll). In Kordkouy station the best mutant line was Chirpan irradiated with 250 gray, line 3208, with 20% yield increase compared to Sahel and 30% yield increase compared to original Chirpan. In respect to irradiation effect on lint percentage and fiber quality, the results showed; there was a positive effect on lint percentage of all varieties, especially in Tashkant, Bakhtegan and Chirpan which are inherently weak in lint percentage. As a whole gamma radiation did not have any negative effect on fiber quality. Even in Estahban 1.6 to 2.4 mm fiber increase were observed in some Chirpan irradiated material (C150-3516) and (C200-3523)

  18. Fueling our future: four steps to a new reliable, cleaner, decentralized energy supply based on Hydrogen and fuel cells

    International Nuclear Information System (INIS)

    Evers, A.

    2005-01-01

    In examining various market strategies, this presentation demonstrates the possible driving factors and necessary elements needed to move Hydrogen and Fuel Cells (H2/FC) to worldwide commercialisation. Focusing not only on the technology itself, this presentation looks at the 'bigger picture' explaining how certain trends have impacted the progress of new technologies developments in the past. The presentation demonstrates how these models can be applied to our present day situation. In this process, the consumer has played and will continue to play the key and leading role. Due to such strong influence, the consumer will ultimately fuel the future of H2/FC commercialisation by a desire for new and not yet discovered products and services. Examining different Distributed Generation scenarios, the catalyst to the Hydrogen Economy may be found through distributed generation via fuel cells. One possible step could be the use of Personal Power Cars equipped with Fuel Cells which not only drive on Hydrogen, but also supply (while standing) electricity /heat to residential and commercial buildings. The incentive for car owners driving and using these vehicles is twofold: either save (at his own home) or earn (at his office) money while their cars are parked and plugged into buildings via smart docking stations available at key parking sites. Cars parked at home in the garage will supply electricity to the homes and additionally, replace the function of the existing boiler. Car owners can earn money by selling the electricity generated (but not needed at that time) to the utilities and feed it into the existing electricity grid. The inter-dependability between supply and consumer-driven demand (or better, demand and supply) and other examples are explained. The steps necessary to achieve a new, reliable, cleaner and decentralized Energy Supply based on H2/FC are also presented and examined. (author)

  19. Household Products Database: Personal Care

    Science.gov (United States)

    ... styling/sculpting haircolor hand cleaner hand cleaner, antibacterial hand sanitizer highlights holding spray insect repellent intimacy itch relief jewelry cleaner kids leather/fabric waterproofing legs lice shampoo lip ... hand cream semi-permanent shampoo shampoo & conditioner combo shampoo & ...

  20. Bioinspiration and Biomimicry: Possibilities for Cotton Byproducts

    Science.gov (United States)

    The byproducts from cotton gins have commonly been referred to as cotton gin trash or cotton gin waste primarily because the lint and seed were the main focus of the operation and the byproducts were a financial liability that did not have a consistent market. Even though the byproducts were called ...

  1. Effect of water pressure on absorbency of hydroentangled greige cotton nonwoven fabrics

    Science.gov (United States)

    A studied has been conducted to determine the effect of water pressure in a commercial-grade Fleissner MiniJet hydroentanglement system on the absorbency of greige (non-bleached) cotton lint-based nonwoven fabric. The study has shown that a water pressure of 125 Bar or higher on only two high-pressu...

  2. 76 FR 70422 - Procurement List Additions

    Science.gov (United States)

    2011-11-14

    ..., Disinfectant Cleaner-Degreaser Cartridge Concentrate. NSN: 7930-00-NIB-0593--Refills, Multi-Purpose Cleaner, Cartridge Concentrate. NSN: 7930-00-NIB-0594--Starter Kit, Multi-Purpose Cleaner, Cartridge Concentrate. NPA..., Anniston, AL Service Type/Locations: Rubbish Removal and Recycling Service Department of the Treasury...

  3. Whole house particle removal and clean air delivery rates for in-duct and portable ventilation systems.

    Science.gov (United States)

    Macintosh, David L; Myatt, Theodore A; Ludwig, Jerry F; Baker, Brian J; Suh, Helen H; Spengler, John D

    2008-11-01

    A novel method for determining whole house particle removal and clean air delivery rates attributable to central and portable ventilation/air cleaning systems is described. The method is used to characterize total and air-cleaner-specific particle removal rates during operation of four in-duct air cleaners and two portable air-cleaning devices in a fully instrumented test home. Operation of in-duct and portable air cleaners typically increased particle removal rates over the baseline rates determined in the absence of operating a central fan or an indoor air cleaner. Removal rates of 0.3- to 0.5-microm particles ranged from 1.5 hr(-1) during operation of an in-duct, 5-in. pleated media filter to 7.2 hr(-1) for an in-duct electrostatic air cleaner in comparison to a baseline rate of 0 hr(-1) when the air handler was operating without a filter. Removal rates for total particulate matter less than 2.5 microm in aerodynamic diameter (PM2.5) mass concentrations were 0.5 hr(-1) under baseline conditions, 0.5 hr(-1) during operation of three portable ionic air cleaners, 1 hr(-1) for an in-duct 1-in. media filter, 2.4 hr(-1) for a single high-efficiency particle arrestance (HEPA) portable air cleaner, 4.6 hr(-1) for an in-duct 5-in. media filter, 4.7 hr(-1) during operation of five portable HEPA filters, 6.1 hr(-1) for a conventional in-duct electronic air cleaner, and 7.5 hr(-1) for a high efficiency in-duct electrostatic air cleaner. Corresponding whole house clean air delivery rates for PM2.5 attributable to the air cleaner independent of losses within the central ventilation system ranged from 2 m3/min for the conventional media filter to 32 m3/min for the high efficiency in-duct electrostatic device. Except for the portable ionic air cleaner, the devices considered here increased particle removal indoors over baseline deposition rates.

  4. Experimental Study on Ultrafine Particle Removal Performance of Portable Air Cleaners with Different Filters in an Office Room

    Directory of Open Access Journals (Sweden)

    Huan Ma

    2016-01-01

    Full Text Available Size- and time-dependent aerodynamic behaviors of indoor particles, including PM1.0, were evaluated in a school office in order to test the performance of air-cleaning devices using different filters. In-situ real-time measurements were taken using an optical particle counter. The filtration characteristics of filter media, including single-pass efficiency, volume and effectiveness, were evaluated and analyzed. The electret filter (EE medium shows better initial removal efficiency than the high efficiency (HE medium in the 0.3–3.5 μm particle size range, while under the same face velocity, the filtration resistance of the HE medium is several times higher than that of the EE medium. During service life testing, the efficiency of the EE medium decreased to 60% with a total purifying air flow of 25 × 104 m3/m2. The resistance curve rose slightly before the efficiency reached the bottom, and then increased almost exponentially. The single-pass efficiency of portable air cleaner (PAC with the pre-filter (PR or the active carbon granule filter (CF was relatively poor. While PAC with the pre-filter and the high efficiency filter (PR&HE showed maximum single-pass efficiency for PM1.0 (88.6%, PAC with the HE was the most effective at removing PM1.0. The enhancement of PR with HE and electret filters augmented the single-pass efficiency, but lessened the airflow rate and effectiveness. Combined with PR, the decay constant of large-sized particles could be greater than for PACs without PR. Without regard to the lifetime, the electret filters performed better with respect to resource saving and purification improvement. A most penetrating particle size range (MPPS: 0.4–0.65 μm exists in both HE and electret filters; the MPPS tends to become larger after HE and electret filters are combined with PR. These results serve to provide a better understanding of the indoor particle removal performance of PACs when combined with different kinds of filters in

  5. Oceanic sharks clean at coastal seamount.

    Directory of Open Access Journals (Sweden)

    Simon P Oliver

    2011-03-01

    Full Text Available Interactions between pelagic thresher sharks (Alopias pelagicus and cleaner wrasse were investigated at a seamount in the Philippines. Cleaning associations between sharks and teleosts are poorly understood, but the observable interactions seen at this site may explain why these mainly oceanic sharks regularly venture into shallow coastal waters where they are vulnerable to disturbance from human activity. From 1,230 hours of observations recorded by remote video camera between July 2005 and December 2009, 97 cleaner-thresher shark events were analyzed, 19 of which were interrupted. Observations of pelagic thresher sharks interacting with cleaners at the seamount were recorded at all times of day but their frequency declined gradually from morning until evening. Cleaners showed preferences for foraging on specific areas of a thresher shark's body. For all events combined, cleaners were observed to conduct 2,757 inspections, of which 33.9% took place on the shark's pelvis, 23.3% on the pectoral fins, 22.3% on the caudal fin, 8.6% on the body, 8.3% on the head, 2.1% on the dorsal fin, and 1.5% on the gills respectively. Cleaners did not preferentially inspect thresher sharks by time of day or by shark sex, but there was a direct correlation between the amount of time a thresher shark spent at a cleaning station and the number of inspections it received. Thresher shark clients modified their behavior by "circular-stance-swimming," presumably to facilitate cleaner inspections. The cleaner-thresher shark association reflected some of the known behavioral trends in the cleaner-reef teleost system since cleaners appeared to forage selectively on shark clients. Evidence is mounting that in addition to acting as social refuges and foraging grounds for large visiting marine predators, seamounts may also support pelagic ecology by functioning as cleaning stations for oceanic sharks and rays.

  6. Ultra-low gossypol cottonseed: gene-silencing opens up a vast, but underutilized protein resource for human nutrition

    Science.gov (United States)

    Cotton, grown mainly for its fiber, is a major crop in several developing and developed countries across the globe. In 2012, 48.8 million metric tons (MMT) of cottonseed was produced worldwide as a by-product of the 25.9 MMT of cotton lint production (FAO Production Statistics). This amount of cot...

  7. The role of surface chemical analysis in a study to select replacement processes for TCA vapor degreasing

    Science.gov (United States)

    Lesley, Michael W.; Davis, Lawrence E.; Moulder, John F.; Carlson, Brad A.

    1995-01-01

    The role of surface-sensitive chemical analysis (ESCA, AES, and SIMS) in a study to select a process to replace 1, 1, 1-trichloroethane (TCA) vapor degreasing as a steel and aluminum bonding surface preparation method is described. The effort was primarily concerned with spray-in-air cleaning processes involving aqueous alkaline and semi-aqueous cleaners and a contamination sensitive epoxy-to-metal bondline. While all five cleaners tested produced bonding strength results equal to or better than those produced by vapor degreasing, the aqueous alkaline cleaners yielded results which were superior to those produced by the semi-aqueous cleaners. The main reason for the enhanced performance appears to be a silicate layer left behind by the aqueous alkaline cleaners. The silicate layer increases the polarity of the surface and enhances epoxy-to-metal bonding. On the other hand, one of the semi-aqueous cleaners left a nonpolar carbonaceous residue which appeared to have a negative effect on epoxy-to-metal bonding. Differences in cleaning efficiency between cleaners/processes were also identified. These differences in surface chemistry, which were sufficient to affect bonding, were not detected by conventional chemical analysis techniques.

  8. On Geometric and Algebraic Aspects of 3D Affine and Projective Structures from Perspective 2D Views

    Science.gov (United States)

    1993-07-01

    June 1992. an ideal lint (has no image ,n /th rteal plane) and [5] O.D. Faugeras. Q.T. Luong, and S.J. Maybank . uhich maps non-collhnearpoints A. B.C...projection for tire. Italy, .lune 1992. any giei aftin( transformation of the plane. [6 O.D. Faugeras and S. Maybank . Motion from point matches

  9. Eesti nüüdistants näitas taset / Margit Tõnson

    Index Scriptorium Estoniae

    Tõnson, Margit, 1978-

    2004-01-01

    26.-28. märtsini toimunud festivalist "Uus tants 6", kus astusid üles ZUGA, K. Essenson, K. Juurak, Fine 5, tantsuteater Zick, E. Lints. K. Lindal, J. Savolainen, T. Jansen, O. Titovaja, R. Stepanov. Arvamusi avaldavad ka festivali külastanud lääne kuraatorid D. Van Laeken, M. Hochmuth ja K. Kwanten

  10. The Prediction of Yarn Elongation of Kenyan Ring-Spun Yarn using Extreme Learning Machines (ELM

    Directory of Open Access Journals (Sweden)

    Josphat Igadwa Mwasiagi

    2017-03-01

    Full Text Available The optimization of the manufacture of cotton yarns involves several processes, while the prediction of yarn quality parameters forms an important area of investigation. This research work concentrated on the prediction of cotton yarn elongation. Cotton lint and yarn samples were collected in textile factories in Kenya.The collected samples were tested under standard testing conditions. Cotton lint parameters, machine parameters and yarn elongation were used to design yarn elongation prediction models. The elongation prediction models used three network training algorithms, including backpropagation (BP, an extreme learning machine (ELM, and a hybrid of differential evolution (DE and an ELM referred to as DE-ELM. The prediction models recorded a mean squared error (mse value of 0.001 using 11, 43 and 2 neurons in the hidden layer for the BP, ELM and DE-ELM models respectively. The ELM models exhibited faster training speeds than the BP algorithms, but required more neurons in the hidden layer than other models. The DEELM hybrid algorithm was faster than the BP algorithm, but slower than the ELM algorithm.

  11. Exposure to organic solvents used in dry cleaning reduces low and high level visual function.

    Directory of Open Access Journals (Sweden)

    Ingrid Astrid Jiménez Barbosa

    Full Text Available To investigate whether exposure to occupational levels of organic solvents in the dry cleaning industry is associated with neurotoxic symptoms and visual deficits in the perception of basic visual features such as luminance contrast and colour, higher level processing of global motion and form (Experiment 1, and cognitive function as measured in a visual search task (Experiment 2.The Q16 neurotoxic questionnaire, a commonly used measure of neurotoxicity (by the World Health Organization, was administered to assess the neurotoxic status of a group of 33 dry cleaners exposed to occupational levels of organic solvents (OS and 35 age-matched non dry-cleaners who had never worked in the dry cleaning industry. In Experiment 1, to assess visual function, contrast sensitivity, colour/hue discrimination (Munsell Hue 100 test, global motion and form thresholds were assessed using computerised psychophysical tests. Sensitivity to global motion or form structure was quantified by varying the pattern coherence of global dot motion (GDM and Glass pattern (oriented dot pairs respectively (i.e., the percentage of dots/dot pairs that contribute to the perception of global structure. In Experiment 2, a letter visual-search task was used to measure reaction times (as a function of the number of elements: 4, 8, 16, 32, 64 and 100 in both parallel and serial search conditions.Dry cleaners exposed to organic solvents had significantly higher scores on the Q16 compared to non dry-cleaners indicating that dry cleaners experienced more neurotoxic symptoms on average. The contrast sensitivity function for dry cleaners was significantly lower at all spatial frequencies relative to non dry-cleaners, which is consistent with previous studies. Poorer colour discrimination performance was also noted in dry cleaners than non dry-cleaners, particularly along the blue/yellow axis. In a new finding, we report that global form and motion thresholds for dry cleaners were also

  12. Picker versus stripper harvesters on the High Plains of Texas

    Science.gov (United States)

    A break even analysis based on NPV was conducted to compare picker-based and stripper-based harvest systems with and without field cleaners. Under no conditions analyzed was the NPV of a stripper system without a field cleaner greater than a stripper system with a field cleaner. Break even curves re...

  13. Microwave moisture sensing of wet bales

    Science.gov (United States)

    Sensing of moisture in very wet lint bales is unique due to the fact that moisture distribution is typically non-uniform and can in some instances be highly localized. This issue is even further complicated by the use of a sensor that reads only a portion of the bale and/or with a sensor that provid...

  14. Decrease in musculoskeletal pain after 4 and 12 months of an aerobic exercise intervention: a worksite RCT among cleaners.

    Science.gov (United States)

    Korshøj, Mette; Birk Jørgensen, Marie; Lidegaard, Mark; Mortensen, Ole Steen; Krustrup, Peter; Holtermann, Andreas; Søgaard, Karen

    2017-07-01

    Prevalence of musculoskeletal pain is high in jobs with high physical work demands. An aerobic exercise intervention targeting cardiovascular health was evaluated for its long term side effects on musculoskeletal pain. The objective was to investigate if aerobic exercise affects level of musculoskeletal pain from baseline to 4- and 12-months follow-up. One-hundred-and-sixteen cleaners aged 18-65 years were cluster-randomized. The aerobic exercise group ( n = 57) received worksite aerobic exercise (30 min twice a week) and the reference group ( n = 59) lectures in health promotion. Strata were formed according to closest manager (total 11 strata); clusters were set within strata (total 40 clusters, 20 in each group). Musculoskeletal pain data from eight body regions was collected at baseline and after 4- and 12-months follow-up. The participants stated highest pain in the last month on a scale from 0, stating no pain, up to 10, stating worst possible pain. A repeated-measure 2 × 2 multi-adjusted mixed-models design was applied to compare the between-groups differences in an intention to treat analysis. Participants were entered as a random effect nested in clusters to account for the cluster-based randomization. Clinically significant reductions (>30%, f  2 > 0.25) in the aerobic exercise group, compared to the reference group, in pain intensity in neck, shoulders, arms/wrists were found at 12-months follow-up, and a tendency ( p = 0.07, f  2 = 0.18) to an increase for the knees. At 4-months follow-up the only significant between-group change was an increase in hip pain. This study indicates that aerobic exercise reduces musculoskeletal pain in the upper extremities, but as an unintended side effect may increase pain in the lower extremities. Aerobic exercise interventions among workers standing or walking in the majority of the working hours should tailor exercise to only maintain the positive effect on musculoskeletal pain.

  15. Technological innovation and sustainable development: The experience of Italian companies; Innovazione tecnologica e sviluppo sostenibile: le esperienze delle imprese italiane

    Energy Technology Data Exchange (ETDEWEB)

    Malaman, R. [Istituto per la Ricerca Sociale, Milan (Italy)]|[Fondazione Eni Enrico Mattei, Milan (Italy)

    1995-12-01

    Nearly 200 case studies of cleaner innovation technologies developed or adopted by Italian companies have been analysed after the building of an appropriate database. The article summarises the results of this analysis. Initially, the concept of cleaner technologies is introduced, and theoretical aspects related to generation and diffusion of cleaner technologies are discussed, including obstacles to the development, technological opportunities, market demand and appropriate conditions. Then, some features of cleaner innovative technologies are analysed from the database: localisation, size and sectorial distribution of innovative companies. evolutive stage of companies behaviour, the role of environmental policy, the capabilities of the national innovative system, the distribution of change technologies according to Pavitt`s tassonomy. The final paragraph includes some reflection on the use of innovation policy to promote cleaner innovative technologies.

  16. STUDI PENERAPAN PRODUKSI BERSIH UNTUK INDUSTRI KERUPUK

    Directory of Open Access Journals (Sweden)

    Banun Diyah Probowati

    2016-11-01

    Full Text Available Cleaner productionwas minimize waste and emissions and maximize product output. The aimed of research were to identified and to analysed application of cleaner production from crackers industry. By analysing the flow of materials and energy in this industry and then to identify options to minimize waste industrial processes. Improvements of organisation and technology help to reduce or suggest better choices in use of materials and energy, and to avoid waste, waste water generation, and gaseous emissions, and also waste heat.. Application of this cleaner production were a good house keeping, recycle, reduce and reuse. Modified a fireplace and smoked funnel were the choice of alternative to application the cleaner production. The benefit from application of cleaner production was 5% efficiency wood to be burn. There was the complete process of burning with value of efficiency.

  17. Personal Protective Equipment In Animal Research - Back To The Basics (A review paper)

    Science.gov (United States)

    2016-12-02

    Multilayere d spunbonded -meltblown- spunbonded (SMS) fabric High tensile strength, soft, comfortable, and breathable; low-linting and resistant to...The Association of the Nonwoven and Engineered Fabrics Industry, Cary, NC Note: The views expressed in this article are those of the authors and...Code of Federal Regulations FDA – Food and Drug Administration NFPA - National Fire Protection Association NIOSH - National Institute of

  18. Requirements for a Device-Based Training and Testing Program for M1 Gunnery. Volume 2. Detailed Analyses and Results

    Science.gov (United States)

    1988-03-01

    ACTIVITY 11. ASSESS RESULTS OF ENCAGENENT TC GNU IDR M Alien battle dauge/c<iua1ttis Check/adJuit MRS Dtttratiw If and how crm ihould bt... UfO Of ring« lino con fco obiorvod on CRT. Kongo It not innounctd, but oppaor on CRT diti oroo. U(0 of ringt lint con bo obior»td on CRT

  19. Drain cleaner poisoning

    Science.gov (United States)

    ... Activated charcoal, which is used to treat other types of poisoning does not effectively treat (adsorb) sodium hydroxide. For skin exposure, treatment may include: Surgical removal of burned skin (debridement) Transfer to a hospital that specializes in burn ...

  20. Oven cleaner poisoning

    Science.gov (United States)

    ... do so by poison control or a health care provider. If the chemical is on the skin or in the eyes, flush with lots of water for at least 15 minutes. If the chemical was swallowed, immediately give the person water or milk, unless instructed otherwise by a provider. If the ...

  1. Accelerating effects of cellulase in the removal of denture adhesives from acrylic denture bases.

    Science.gov (United States)

    Harada-Hada, Kae; Mimura, Sumiyo; Hong, Guang; Hashida, Tatsumi; Abekura, Hitoshi; Murata, Hiroshi; Nishimura, Masahiro; Nikawa, Hiroki

    2017-04-01

    Studies of effective methods for the easy removal of denture adhesives from a denture base are not well represented in the literature. We previously assessed the removability of denture adhesives by immersing within denture cleaners, showing that some cleaners have a weak effect, insufficiently effective in daily use. In this study, we prepared a cellulase, as a potential component for denture adhesive removers, and we examined whether the addition of cellulase to denture cleaners is effective in the removal of cream denture adhesives. We prepared the cellulase Meicelase as one component for the liquefaction of denture adhesives. We used two denture cleaners and two cream adhesives. After the immersion of plates in sample solutions, we evaluated the area of the sample plate still covered with adhesives. Biofilm removal assay was also performed using denture cleaners containing cellulase. The addition of cellulase accelerated the removal of cream adhesives in immersion experiments to a rate faster than that of water and denture cleaners. However, it did not influence the removability of Candida albicans biofilms from acrylic resin specimens. Cellulase hastened the liquefaction of cream adhesives. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  2. DIMENSI SISTEM MANAJEMEN LINGKUNGAN YANG DOMINAN TERHADAP UPAYA PRODUKSI BERSIH PERUSAHAAN ( STUDI KASUS INDUSTRI PENGOLAHAN KARET REMAH )

    OpenAIRE

    Hasibuan, Sawarni

    2011-01-01

    This study is designed to identify dimension of environmental management system that influence of cleaner production’s strategy accept and implementation at natural rubber industry, especially in crumb rubber industry. Factor Analysis technic with Principal Component is aplicated to extract that dimension, while correlation analysis is using to inference the influence that dimension with cleaner production performance. Based of existing condition, deviation of cleaner production performance f...

  3. From kitchen to classroom: Assessing the impact of cleaner burning biomass-fuelled cookstoves on primary school attendance in Karonga district, northern Malawi.

    Science.gov (United States)

    Kelly, Christine A; Crampin, Amelia C; Mortimer, Kevin; Dube, Albert; Malava, Jullita; Johnston, Deborah; Unterhalter, Elaine; Glynn, Judith R

    2018-01-01

    Household air pollution from burning solid fuels is responsible for an estimated 2.9 million premature deaths worldwide each year and 4.5% of global disability-adjusted life years, while cooking and fuel collection pose a considerable time burden, particularly for women and children. Cleaner burning biomass-fuelled cookstoves have the potential to lower exposure to household air pollution as well as reduce fuelwood demand by increasing the combustion efficiency of cooking fires, which may in turn yield ancillary benefits in other domains. The present paper capitalises on opportunities offered by the Cooking and Pneumonia Study (CAPS), the largest randomised trial of biomass-fuelled cookstoves on health outcomes conducted to date, the design of which allows for the evaluation of additional outcomes at scale. This mixed methods study assesses the impact of cookstoves on primary school absenteeism in Karonga district, northern Malawi, in particular by conferring health and time and resource gains on young people aged 5-18. The analysis combines quantitative data from 6168 primary school students with in-depth interviews and focus group discussions carried out among 48 students in the same catchment area in 2016. Negative binomial regression models find no evidence that the cookstoves affected primary school absenteeism overall [IRR 0.92 (0.71-1.18), p = 0.51]. Qualitative analysis suggests that the cookstoves did not sufficiently improve household health to influence school attendance, while the time and resource burdens associated with cooking activities-although reduced in intervention households-were considered to be compatible with school attendance in both trial arms. More research is needed to assess whether the cookstoves influenced educational outcomes not captured by the attendance measure available, such as timely arrival to school or hours spent on homework.

  4. Švaresnės gamybos koncepcijos taikymas šilumos ūkyje

    OpenAIRE

    Steponavičius, Ramūnas

    2016-01-01

    Environmental protection through cleaner heat generation becomes increasingly important issue, both globally as well as locally. The problem: The opportunities of applying the cleaner production concept in the heat sector company for the purpose to improve the use of energy resources. Object: Opportunities of applying the cleaner production concept to central heating company. The goal: after the scientific literature analysis identify the possibilities of applying the concept of clea...

  5. Effects of Early Acute Care on Autonomic Outcomes in SCI: Bedside to Bench and Back

    Science.gov (United States)

    2017-12-01

    the current recommendations for acute SCI.15 Earlier in the course of this patient population, high-dose methylprednisolone was used at the discretion ...Principal component analysis: a review and recent developments. Philos Trans A Math Phys Eng Sci 2016;374: 20150202 CrossRef Medline 33. Linting M...grade 3 injury with super- imposed discrete foci of intramedullary T2 hypointensity attributed to the presence of macroscopic intramedullary

  6. Investment threshold and management reflection for industrial system cleaning: a case for China.

    Science.gov (United States)

    Fang, Yiping

    2012-03-01

    The recognition that industrial activity plays an essential role in a sustainable society is now widespread. To understand the causal relationship between industrial pollution abatement expenditure and industrial system cleaning level in China is of considerable importance, especially under extremely rapid industrial growth and serious pressure of industrial pollutants abatement context. We use composite index assessment method and regression analysis in this paper. We establish the mathematical model between composite industrial cleaner index and investment intensity for industrial pollutants abatement, and analyze the effects of industrial pollutants treatment and discharge indicators on composite industrial cleaner index in China. Results show that: (1) There is significant nonlinear relationship between composite industrial cleaner index and investment intensity for industrial pollutants abatement. (2) From single indicator perspective, the effect of investment intensity on pollutants treatment indicators is positively, on the contrary, the effect of investment intensity on pollutants discharge indicators is negatively; (3) From decomposition cleaner index perspective, the effect of pollutants discharge level (process control) is higher than pollutants treatment capacity (end-of-pipe) on composite industrial cleaner index; (4) There is threshold between investment intensity and composite cleaner industrial index, it is a crucial reference scale for industrial environmental management in selected period.

  7. Is the Philippine geothermal resource sustainable?

    International Nuclear Information System (INIS)

    Lalo, J.; Raymundo, E.

    2005-01-01

    This paper aims to illustrate the scenario in the Geothermal Energy Development Projects in the Philippines, to make the Filipino population aware that there is an existing cleaner technology available that is being utilized in Europe; for the Philippine geothermal energy project operators to adapt a cleaner production technology that has no harmful emission, hence, no pollution technology; to help end the conflict between stake holders and geothermal players through the introduction of cleaner production technology intervention. While it is a fact that the Philippines' Geothermal resource is second to U.S. or around the globe, the unwise utilization of geothermal energy may lead to depletion, hence, becomes non-renewable. It should be understood that the geothermal energy is a renewable resource only if the development process is sustainable. There is a need to educate the Filipino populace regarding a cleaner production technology as well as our government and political leaders. This cleaner production technology is a solution to the stake holders. It is of great importance to inform the Filipino people that there is an existing cleaner new technology from Europe and U.S. that is not pollutive in nature and is essentially sustainable development scheme since underground reservoirs are not depleted in the process. (author)

  8. ADAPTABILIDADE E ESTABILIDADE FENOTÍPICA DE CULTIVARES DE ALGODOEIRO NO ESTADO DO MATO GROSSO, BRASIL PHENOTYPIC ADAPTABILITY AND STABILITY OF COTTON CULTIVARS IN THE MATO GROSSO STATE, BRAZIL

    Directory of Open Access Journals (Sweden)

    Cristina Schetino Bastos

    2007-09-01

    Full Text Available

    O objetivo deste trabalho foi o de avaliar a adaptabilidade e a estabilidade de cultivares de algodão (Gossypium hirsutum L., utilizando a metodologia proposta por Eberhart & Russell (1966. Para tanto, onze variedades de algodão foram avaliadas em sete locais do Estado do Mato Grosso, Brasil, em dois anos agrícolas (2002/2003 e 2003/2004. O delineamento experimental empregado foi o de blocos casualizados com quatro repetições e as características avaliadas foram a produtividade de algodão em caroço e a porcentagem de fibra. Com relação à produção de algodão em caroço, as cultivares BRS Aroeira, BRS Ipê, BRS Cedro, BRS Jatobá e Delta Opal demonstraram ampla adaptabilidade e estabilidade para as regiões produtoras do Estado. Entretanto, considerando a porcentagem de fibra, não foram encontradas cultivares de algodão com ampla adaptabilidade e estabilidade nos ambientes estudados.

    PALAVRAS-CHAVE: Gossypium hirsutum; fibra; estabilidade.

    The objective of this work was to evaluate the stability and adaptability of cotton (Gossypium hirsutum L. cultivars using the method of Eberhart & Russell (1966. Eleven varieties of cotton were tested at seven locations in Mato Grosso State, Brazil, in two growing seasons (2002/2003 and 2003/2004. The experimental design was the randomized complete blocks with four replications and the evaluated traits were lint percentage and seed cotton yield. For seed cotton yield, BRS Aroeira, BRS Ipê, BRS Cedro, BRS Jatobá and Delta Opal showed broad adaptability and stability in Mato Grosso State. However, for lint percentage there were not found cotton cultivars with both broad adaptability and stability for the studied environments.

  9. Quantitative trait loci mapping and genetic dissection for lint ...

    Indian Academy of Sciences (India)

    2014-08-01

    Aug 1, 2014 ... hirsutum, as parents to construct a mapping populations in upland ... that could be candidate markers affecting cotton fibre development. .... F2:3 family line seeds were harvested. ... long). All activities were performed as per the normal mana- ... times, and the QTL with a LOD value of more than the LOD.

  10. Calcium hydroxide poisoning

    Science.gov (United States)

    Hydrate - calcium; Lime milk; Slaked lime ... Calcium hydroxide ... These products contain calcium hydroxide: Cement Limewater Many industrial solvents and cleaners (hundreds to thousands of construction products, flooring strippers, brick cleaners, cement ...

  11. 40 CFR Table 4 to Subpart Wwww of... - Work Practice Standards

    Science.gov (United States)

    2010-07-01

    ... Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production Pt. 63, Subpt. WWWW, Table... be used as a cleaner in closed systems, and organic HAP containing cleaners may be used to clean...

  12. Early Critical Care Decisions and Outcomes after SCI: Track-SCI

    Science.gov (United States)

    2017-09-01

    injury represented grade 3 injury with super- imposed discrete foci of intramedullary T2 hypointensity attributed to the presence of macroscopic...Principal component analysis: a review and recent developments. Philos Trans A Math Phys Eng Sci 2016;374: 20150202 CrossRef Medline 33. Linting M...recommendations for acute SCI.15 Earlier in the course of this patient population, high-dose methylprednisolone was used at the discretion of the treating spine

  13. Comparative cost-efficiency of the EVOTECH endoscope cleaner and reprocessor versus manual cleaning plus automated endoscope reprocessing in a real-world Canadian hospital endoscopy setting

    Directory of Open Access Journals (Sweden)

    Shum Cynthia

    2011-10-01

    Full Text Available Abstract Background Reprocessing of endoscopes generally requires labour-intensive manual cleaning followed by high-level disinfection in an automated endoscope reprocessor (AER. EVOTECH Endoscope Cleaner and Reprocessor (ECR is approved for fully automated cleaning and disinfection whereas AERs require manual cleaning prior to the high-level disinfection procedure. The purpose of this economic evaluation was to determine the cost-efficiency of the ECR versus AER methods of endoscopy reprocessing in an actual practice setting. Methods A time and motion study was conducted at a Canadian hospital to collect data on the personnel resources and consumable supplies costs associated with the use of EVOTECH ECR versus manual cleaning followed by AER with Medivators DSD-201. Reprocessing of all endoscopes was observed and timed for both reprocessor types over three days. Laboratory staff members were interviewed regarding the consumption and cost of all disposable supplies and equipment. Exact Wilcoxon rank sum test was used for assessing differences in total cycle reprocessing time. Results Endoscope reprocessing was significantly shorter with the ECR than with manual cleaning followed by AER. The differences in median time were 12.46 minutes per colonoscope (p Conclusions The EVOTECH ECR was more efficient and less costly to use for the reprocessing of endoscopes than manual cleaning followed by AER disinfection. Although the cost of consumable supplies required to reprocess endoscopes with EVOTECH ECR was slightly higher, the value of the labour time saved with EVOTECH ECR more than offset the additional consumables cost. The increased efficiency with EVOTECH ECR could lead to even further cost-savings by shifting endoscopy laboratory personnel responsibilities but further study is required.

  14. The Role of SIRT1 In Breast Cancer Stem Cells

    Science.gov (United States)

    2016-09-01

    2009;9:123-8. 56. Ma W, Xiao GG, Mao J, Lu Y, Song B, Wang L, Fan S, Fan P, Hou Z, Li J, Yu X, 20 Wang B, Wang H, Wang H, Xu F, Li Y, Liu Q, Li L...Int J Biol Sci. 2010;6:599-612. 63. Zhang Y, Zhang M, Dong H, Yong S, Li X, Olashaw N, Kruk PA, Cheng JQ, Bai W, Chen J, Nicosia SV, Zhang X

  15. The Clean Air Act and the Economy

    Science.gov (United States)

    Since 1970, cleaner air and a growing economy have gone hand in hand. The Act has created market opportunities that have helped to inspire innovation in cleaner technologies for which the United States has become a global market leader.

  16. Does aerobic exercise increase 24-hour ambulatory blood pressure among workers with high occupational physical activity? - A RCT

    DEFF Research Database (Denmark)

    Korshøj, Mette; Krause, Niklas; Clays, Els

    2017-01-01

    .9–3.8). Cleaners with high aerobic workload exhibited particularly high 24-hour ABP increases: systolic 6.0 mm Hg (95% CI 2.4–9.6), and diastolic 3.8 mm Hg (95% CI 1.3–6.4). CONCLUSION Aerobic exercise increased 24-hour ABP among cleaners. This adverse effect raises questions about the safety and intended benefits......OBJECTIVE High occupational physical activity (OPA) increases cardiovascular risk and aerobic exercise has been recommended for reducing this risk. This paper investigates the effects of an aerobic exercise intervention on 24-hour ambulatory blood pressure (ABP) among cleaners with high OPA....... METHODS Hundred and sixteen cleaners between 18 and 65 years were randomized. During the 4-month intervention period, the aerobic exercise group (AE) (n = 57) performed worksite aerobic exercise (2 × 30 minutes/week), while the reference group (REF) (n = 59) attended lectures. Between-group differences...

  17. Does Aerobic Exercise Increase 24-Hour Ambulatory Blood Pressure Among Workers With High Occupational Physical Activity? - A RCT

    DEFF Research Database (Denmark)

    Korshøj, Mette; Krause, Niklas; Clays, Els

    2017-01-01

    .9–3.8). Cleaners with high aerobic workload exhibited particularly high 24-hour ABP increases: systolic 6.0 mm Hg (95% CI 2.4–9.6), and diastolic 3.8 mm Hg (95% CI 1.3–6.4). CONCLUSION Aerobic exercise increased 24-hour ABP among cleaners. This adverse effect raises questions about the safety and intended benefits......OBJECTIVE High occupational physical activity (OPA) increases cardiovascular risk and aerobic exercise has been recommended for reducing this risk. This paper investigates the effects of an aerobic exercise intervention on 24-hour ambulatory blood pressure (ABP) among cleaners with high OPA....... METHODS Hundred and sixteen cleaners between 18 and 65 years were randomized. During the 4-month intervention period, the aerobic exercise group (AE) (n = 57) performed worksite aerobic exercise (2 × 30 minutes/week), while the reference group (REF) (n = 59) attended lectures. Between-group differences...

  18. Crime and punishment in a roaming cleanerfish.

    Science.gov (United States)

    Mills, Suzanne C; Côté, Isabelle M

    2010-12-07

    Cheating is common in cooperative interactions, but its occurrence can be controlled by various means ranging from rewarding cooperators to active punishment of cheaters. Punishment occurs in the mutualism involving the cleanerfish Labroides dimidiatus and its reef fish clients. When L. dimidiatus cheats, by taking scales and mucus rather than ectoparasites, wronged clients either chase or withhold further visits to the dishonest cleaner, which leads to more cooperative future interactions. Punishment of cheating L. dimidiatus may be effective largely because these cleaners are strictly site-attached, increasing the potential for repeated interactions between individual cleaners and clients. Here, we contrast the patterns of cheating and punishment in L. dimidiatus with its close relative, the less site-attached Labroides bicolor. Overall, L. bicolor had larger home ranges, cheated more often and, contrary to our prediction, were punished by cheated clients as frequently as, and not less often than, L. dimidiatus. However, adult L. bicolor, which had the largest home ranges, did not cheat more than younger conspecifics, suggesting that roaming, and hence the frequency of repeated interactions, has little influence on cheating and retaliation in cleaner-client relationships. We suggest that roaming cleaners offer the only option available to many site-attached reef fish seeking a cleaning service. This asymmetry in scope for partner choice encourages dishonesty by the partner with more options (i.e. L. bicolor), but to be cleaned by a cleaner that sometimes cheats may be a better option than not to be cleaned at all.

  19. Nutrient Uptake by High-Yielding Cotton Crop in Brazil

    Directory of Open Access Journals (Sweden)

    José Luís Vilela Vieira

    2018-02-01

    Full Text Available ABSTRACT: Determining nutrient uptake and accumulation rates by cotton crops is important to define management strategies, especially for transgenic varieties, which are cultivated using high-technology approaches that require substantial investment to maximize yield. Currently in Brazil, the states of Bahia and Mato Grosso are responsible for 84.4 % of the total cotton growing area. In the present study, two trials were conducted in 2013, one that involved planting FM 940 GLT, FM 980 GLT, and FM 913 GLT varieties in the state of Bahia and the other which involved FM 940 GLT and FM 980 GLT varieties in the state of Mato Grosso. The aim of the two trials was to represent the two regions that currently encompass the largest areas of cotton cultivation. Tissue samples, consisting of leaves, stems, and reproductive components, were collected eleven times during the crop cycle for determination of nutrient content and shoot dry matter. After weighing, plant tissue samples were dried and ground to determine nutrient contents. Because there were no overall differences in nutrient contents and biomass accumulation of the varieties during the crop cycle, we undertook joint analysis of the data from all varieties at each site. Favorable climatic conditions in Bahia promoted plant biomass production that was twice as much as plants grown in Mato Grosso, with cotton yields of 6.2 and 3.8 t ha−1 of lint and seed, respectively. The maximum nutrient accumulation occurred between 137-150 days after emergence (DAE for N; 143-148 for P; 172-185 for K; 100 for Ca; 144-149 for Mg; and 153-158 for S. Maximum uptake ranged from 218-362 kg ha−1 N; 26-53 kg ha−1 P; 233-506 kg ha−1 K; 91-202 kg ha−1 Ca; 28-44 kg ha−1 Mg; and 19-61 kg ha−1 S. On average, the sites revealed nutrient export of 14, 2, 23, 3, 2, and 2 kg t−1 of lint and seed for N, P, K, Ca, Mg, and S, respectively, with little variation among sites. Extraction of nutrients per area by cotton

  20. Verde plant bug (Hemiptera: Miridae) feeding injury to cotton bolls characterized by boll age, size, and damage ratings.

    Science.gov (United States)

    Armstrong, J Scott; Brewer, Michael J; Parker, Roy D; Adamczyk, J J

    2013-02-01

    The verde plant bug, Creontiades signatus (Distant), has been present in south Texas for several years but has more recently been documented as an economic threat to cultivated cotton, (Gossypium hirsutum L. Our studies over 2 yr (2009 and 2010) and two locations (Weslaco and Corpus Christi, TX) investigated feeding-injury of the verde plant bug to a range of cotton boll age classes defined by boll diameter and accumulated degree-days (anthesis to the time of infesting) for first-position cotton bolls infested with the plant bugs. The most detrimental damage to younger cotton holls from verde plant bug feeding was boll abscission. Cotton bolls verde plant bug injured bolls compared with the controls up to 162 ACDD or a mean boll diameter 2.0 cm. Cotton seed weights were significantly reduced up to 179 ACDD or a boll diameter of 2.0 cm at Weslaco in 2009, and up to 317 ACDD or boll diameter 2.6 cm for Weslaco in 2010 when compared with the noninfested controls. Lint weight per cotton boll for infested and noninfested bolls was significantly reduced up to 262 ACDD or boll diameter 2.5 for Corpus Christi in 2010 and up to 288 ACCD or boll diameter 2.6 cm for Weslaco, TX, in 2010. Damage ratings (dependant variable) regressed against infested and noninfested seed-cotton weights showed that in every instance, the infested cotton bolls had a strong and significant relationship with damage ratings for all age classes of bolls. Damage ratings for the infested cotton bolls that did not abscise by harvest showed visual signs of verde plant bug feeding injury and the subsequent development ofboll rot; however, these two forms of injury causing lint and seed mass loss are hard to differentiate from open or boll-locked cotton bolls. Based on the results of both lint and seed loss over 2 yr and four studies cotton bolls should be protected up to approximately 300 ACDD or a boll diameter of 2.5 cm. This equilibrates to bolls that are 12-14 d of age dependent upon daily maximum

  1. 76 FR 57719 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-09-16

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products NSN: 7930-00-NIB-0583--Refills, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0584--Starter Kit, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0585...

  2. Bedbug Bites

    Science.gov (United States)

    ... walls, and floors. Vacuuming some talcum powder will reduce the chance that the bugs will crawl out of the vacuum cleaner. Dispose of the vacuum cleaner filter and bags in a tightly sealed plastic bag. Use mattress, box spring, and pillow encasements to trap ...

  3. Motorboat noise disrupts co-operative interspecific interactions.

    Science.gov (United States)

    Nedelec, Sophie L; Mills, Suzanne C; Radford, Andrew N; Beldade, Ricardo; Simpson, Stephen D; Nedelec, Brendan; Côté, Isabelle M

    2017-08-01

    Human-made noise is contributing increasingly to ocean soundscapes. Its physical, physiological and behavioural effects on marine organisms are potentially widespread, but our understanding remains largely limited to intraspecific impacts. Here, we examine how motorboats affect an interspecific cleaning mutualism critical for coral reef fish health, abundance and diversity. We conducted in situ observations of cleaning interactions between bluestreak cleaner wrasses (Labroides dimidiatus) and their fish clients before, during and after repeated, standardised approaches with motorboats. Cleaners inspected clients for longer and were significantly less cooperative during exposure to boat noise, and while motorboat disturbance appeared to have little effect on client behaviour, as evidenced by consistency of visit rates, clientele composition, and use of cleaning incitation signals, clients did not retaliate as expected (i.e., by chasing) in response to increased cheating by cleaners. Our results are consistent with the idea of cognitive impairments due to distraction by both parties. Alternatively, cleaners might be taking advantage of distracted clients to reduce their service quality. To more fully understand the importance of these findings for conservation and management, further studies should elucidate whether the efficacy of ectoparasite removal by cleaners is affected and explore the potential for habituation to boat noise in busy areas.

  4. Can budget support to the cotton sector be used more efficiently? An assessment of the policy support measures in Mali and Burkina Faso

    OpenAIRE

    Gourichon, Helene; Kone, Bourema; Lanos, Barthelemy; Aparisi, Alban Mas

    2014-01-01

    In Burkina Faso and in Mali, cotton is the main cash crop, export of cotton lint accounting for 60 percent and 15 percent of the value of national exports, respectively, in 2014. To maintain the level of cotton production, the Governments of Burkina Faso and Mali support the sector by ensuring stable and remunerative prices for producers. Indeed, analyses based on the Monitoring and Analysing Food and Agricultural Policies (MAFAP) methodology show that the policy environment supported produce...

  5. Our Car as Power Plant

    NARCIS (Netherlands)

    Van Wijk, A.J.M.; Verhoef, L.

    2014-01-01

    Fuel cell cars can provide more efficient and cleaner transportation. However, we use our cars for transportation only 5% of the time. When parked, the fuel cell in the car can produce electricity from hydrogen, which is cleaner and more efficient than the current electricity system, generating

  6. 16 CFR 1500.17 - Banned hazardous substances.

    Science.gov (United States)

    2010-01-01

    ...)(2); and part 1507). (4) Liquid drain cleaners containing 10 percent or more by weight of sodium and/or potassium hydroxide; except that this subparagraph shall not apply to such liquid drain cleaners... and U.S. importers from sales losses, production changes, and inventory retrofitting, and slightly...

  7. JournaLofEEA, Vol. 25, 2008----- -

    African Journals Online (AJOL)

    CLEANER PRODUCTION FOR SOLID WASTE MANAGEMENT IN LEATHER. INDUSTRY ... The solid waste inventory of the factory has b~en ... generate solid wastes. • Identification of problems existing in the• process. • Generation of Cleaner Production options. • Identification of the best options that are economically and ...

  8. Workshop Proceedings: Utilizing global information systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This one day workshop was attended by 50 delegates representing 20 countries. Fourteen papers dealing with cleaner production/cleaner technology global information systems were presented. The objective of the workshop was to increase cooperation and interaction on international clean production/clean technology information transfer activities and to identify ways to ensure continued cooperation and system improvements. Topics discussed included information format to meet user needs; coordination of effort to avoid duplication and to encourage consistency in information delivery; and marketing, to expand the dissemination of information on cleaner production/cleaner technology. In terms of information format, content, systems and reliability were identified as target issues. The group discussing coordination of effort suggested that a wholesale/retail approach to information dissemination be adopted. The group also called for regular meetings to supplement communication via the Internet. The marketing group suggested that there is a need to show the benefits of technologies and to establish links to industrial associations as being critical to success.

  9. AVALIAÇÃO DA GRANULOMETRIA DE ALIMENTAÇÃO E DOS PRODUTOS DA ETAPA ROUGHER DE FLOTAÇÃO DA USINA DO SOSSEGO

    Directory of Open Access Journals (Sweden)

    Mauricio Guimarães Bergerman

    2015-12-01

    Full Text Available A usina do Sossego processa um minério sulfetado de cobre e ouro. A etapa de flotação compreende estágios rougher, cleaner e scavenger do cleaner, sendo que os concentrados das etapas rougher e scavenger do cleaner passam por um estágio de remoagem antes de seguir para a etapa cleaner. Ao longo dos primeiros anos de operação da usina, observou-se que a granulometria de alimentação da remoagem estava consistentemente mais fina que o esperado, mesmo considerando-se que a granulometria de alimentação da flotação (etapa rougher estava dentro dos parâmetros esperados e significativamente mais grossa que o concentrado rougher. Este trabalho apresenta os resultados das amostragens de campo para identificar a origem de tal diferença e quantificar a mesma, assim como ilustra os impactos de tal diferença na etapa de remoagem do concentrado.

  10. Stink Bug Feeding Induces Fluorescence in Developing Cotton Bolls

    Directory of Open Access Journals (Sweden)

    Toews Michael D

    2011-08-01

    Full Text Available Abstract Background Stink bugs (Hemiptera: Pentatomidae comprise a critically important insect pest complex affecting 12 major crops worldwide including cotton. In the US, stink bug damage to developing cotton bolls causes boll abscission, lint staining, reduced fiber quality, and reduced yields with estimated losses ranging from 10 to 60 million dollars annually. Unfortunately, scouting for stink bug damage in the field is laborious and excessively time consuming. To improve scouting accuracy and efficiency, we investigated fluorescence changes in cotton boll tissues as a result of stink bug feeding. Results Fluorescent imaging under long-wave ultraviolet light showed that stink bug-damaged lint, the inner carpal wall, and the outside of the boll emitted strong blue-green fluorescence in a circular region near the puncture wound, whereas undamaged tissue emissions occurred at different wavelengths; the much weaker emission of undamaged tissue was dominated by chlorophyll fluorescence. We further characterized the optimum emission and excitation spectra to distinguish between stink bug damaged bolls from undamaged bolls. Conclusions The observed characteristic fluorescence peaks associated with stink bug damage give rise to a fluorescence-based method to rapidly distinguish between undamaged and stink bug damaged cotton bolls. Based on the fluorescent fingerprint, we envision a fluorescence reflectance imaging or a fluorescence ratiometric device to assist pest management professionals with rapidly determining the extent of stink bug damage in a cotton field.

  11. Use of radiation induction to improve new cotton lines resistant to Heliothis armigera

    Energy Technology Data Exchange (ETDEWEB)

    Hormchan, P [Dept. of Entomology, Faculty of Agriculture, Kasetsart Univ., Bangkok (Thailand); Wongpiyasatid, A [Dept. of Applied and Isotopes Faculty fo Science, Kasetsart Univ., Bangkok (Thailand)

    1996-12-01

    Ratchada 1 (R{sub 1}) seeds irradiated with 300 gray of gamma rays in order to obtain new cotton lines resistant to the American bollworm with high yield and good quality were compared with Srisamrong 2 (SR{sub 1}) and Ratchada 1 (R{sub 1}), the present recommended varieties to the farmers. The experiments were conducted under both laboratory and field conditions for 3 consecutive years and 2 new lines, A P{sub 1} and A P{sub 2} in M{sub 5} with the required attribute, were finally selected. In the lab, after feeding 2 nd instar bollworm larvae with young leaves of tested lines and the controls the increased weight, larval length, pupal weight of new lines were found to be better than those of SR{sub 2} and R{sub 1} including % gossypol and flavonoids, the substances being expected to give antibiotic effect to the insects. Physical aberration was also noticed in A P{sub 1}. As of the field condition, with the similar amount of bollworm numbers, the 10 fresh boll weight, lint weight, seed weight, % lint, micronaire fibre strength, and fibre length were found to be higher and better than those of both controls as well. However, further tests in large scale of farmers` field a period of time will have to be undertaken to ascertain the result

  12. Correlations and Correlated Responses in Upland Cotton (Gossypium hirsutum L.

    Directory of Open Access Journals (Sweden)

    Echekwu, CA.

    2001-01-01

    Full Text Available Plant breeders must be concerned with the total array of economic characters in their efforts to develop a crop variety acceptable to farmers. Their selection endeavours must therefore take into consideration how changes in one trait affect, simultaneously changes in other economic attributes. The importance of correlations and correlated responses is therefore self evident in plant breeding endeavours. In this study F3 progenies from a cross between two cotton lines SAMCOT-9 x Y422 were evaluated for two years and performance data were used to obtain correlations between nine agronomic and fibre quality traits in upland cotton. The results indicated that plant helght was significantly and positively correlated with seed cotton yield, number of sympodial and monopodial branches, seed index, fibre length and micronaire index. Positive and significant correlations were also obtained between : seed cotton yield, tint percent and fibre strength and fibre length. Significant negative correlations were obtained between : plant height and lint percent ; number of monopodial branches, sympodial branches and lint percent ; fibre length, fibre strength and micronaire index. The correlated responses in the other eight traits when selection was practiced for seed cotton yield in the present study shows that it might be more profitable to practice direct selection for seed cotton yield compared to selecting for seed cotton yield through any of the other traits.

  13. A compilation of life cycle studies for six household detergent product categories in Europe: the basis for product-specific A.I.S.E. Charter Advanced Sustainability Profiles.

    Science.gov (United States)

    Golsteijn, Laura; Menkveld, Rimousky; King, Henry; Schneider, Christine; Schowanek, Diederik; Nissen, Sascha

    2015-01-01

    A.I.S.E., the International Association for Soaps, Detergents and Maintenance Products, launched the 'A.I.S.E. Charter for Sustainable Cleaning' in Europe in 2005 to promote sustainability in the cleaning and maintenance products industry. This Charter is a proactive programme for translating the concept of sustainable innovation into reality and actions. Per product category, life cycle assessments (LCA) are used to set sustainability criteria that are ambitious, but also achievable by all market players. This paper presents and discusses LCAs of six household detergent product categories conducted for the Charter, i.e.: manual dishwashing detergents, powder and tablet laundry detergents, window glass trigger spray cleaners, bathroom trigger spray cleaners, acid toilet cleaners, and bleach toilet cleaners. Relevant impact categories are identified, as well as the life cycle stages with the largest contribution to the environmental impact. It was concluded that the variables that mainly drive the results (i.e. the environmental hotspots) for manual dishwashing detergents and laundry detergents were the water temperature, water consumption (for manual dishwashing detergents), product dosage (for laundry detergents), and the choice and amount of surfactant. By contrast, for bathroom trigger sprays, acid and bleach toilet cleaners, the driving factors were plastic packaging, transportation to retailer, and specific ingredients. Additionally, the type of surfactant was important for bleach toilet cleaners. For window glass trigger sprays, the driving factors were the plastic packaging and the type of surfactant, and the other ingredients were of less importance. A.I.S.E. used the results of the studies to establish sustainability criteria, the so-called 'Charter Advanced Sustainability Profiles', which led to improvements in the marketplace.

  14. Low radiation dose impact on human bone mineral density

    International Nuclear Information System (INIS)

    Zaichick, V.E.

    2002-01-01

    Immediately after the Chernobyl Nuclear Power Plant disaster it was assumed that osteoporosis would develop in a few young adult males (the so-called 'cleaners') who took part in the cleanup operations. The following factors were taken into consideration: Low external irradiation of whole body including skeleton; Non-uniform irradiation of thyroid and parathyroid glands by iodine radionuclides, as well as the different radiosensitivity of these organs (imbalance of parathormone and calcitonine); Intoxication from lead dropped from helicopters into the destroyed reactor as well as cadmium, a constituent of the nuclear reactor construction (a suppressive action of Pb and Cd on normal growth and the functioning of osteoblasts); Chronic stress arising in the cleaners following a huge amount of negative information from the mass media about the unhealthy consequences of exposure (imbalance of Ca-regulating hormones, including an excess of glucocorticoids). Despite substantiated assumption, all the efforts of national and international programs during the after-disaster period were mostly aimed at early diagnoses of thyroid and blood diseases. No attention was paid to osteoporosis problems of the cleaners. Only since 1997, the DXA method (Bone Densitometer LUNAR DPX-L) has been used to determine spinal and femoral BMD. To date, 162 men aged 30 to 50 have been examined, that is, those who were 18 to 35 years old during cleanup operations. In addition, the total body composition (tissue, fat, lean, BMD, BMC) as well as height and body mass was determined by DXA in every subject. A control group consisted of 188 randomly selected healthy men of the same age. Using the T score and the WHO recommendation changes in either spinal or femoral BMD that could be classified as osteopenia (77 cleaners, 47.5 %) and osteoporosis (9 cleaners, 5.6 %) were found in 86 of 162 cleaners. No great changes in height and body composition were found in cleaners. The incidence of osteopenia and

  15. Sustainable Industrial Production

    DEFF Research Database (Denmark)

    Brattebö, Helge; Jørgensen, Michael Søgaard; Lorentzen, Børge

    The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies.......The book discusses the concepts of waste minimization, cleaner technology and industrial ecology, including the experiences with employee participation in preventive environmental activities in companies....

  16. 78 FR 12296 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-02-22

    ... services are proposed for addition to the Procurement List for production by the nonprofit agencies listed... and Trailer Wash, 55 GL NSN: 7930-00-NIB-0649--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 5 GL NSN: 7930-00-NIB-0650--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 55 GL...

  17. Greening of Danish Industry

    DEFF Research Database (Denmark)

    Remmen, Arne

    2002-01-01

    The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry.......The article outlines the major changes in the discourse on cleaner technology and on pollution prevention, together with policy instuments applied in the Danish industry....

  18. Respirable quartz hazard associated with coal mine roof bolter dust

    International Nuclear Information System (INIS)

    Joy, G.J.; Beck, T.W.; Listak, J.M.

    2010-01-01

    Pneumoconiosis has been reported to be increasing among underground coal miners in the Southern Appalachian Region. The National Institute for Occupational Safety and Health conducted a study to examine the particle size distribution and quartz content of dust generated by the installation of roof bolts in mines. Forty-six bulk samples of roof bolting machine pre-cleaner cyclone dump dust and collector box dust were collected from 26 underground coal mines. Real-time and integrated airborne respirable dust concentrations were measured on 3 mining sections in 2 mines. The real-time airborne dust concentrations profiles were examined to identify any concentration changes that might be associated with pre-cleaner cyclone dust discharge events. The study showed that bolter dust is a potential inhalation hazard due to the fraction of dust less than 10 μm in size, and the quartz content of the dust. The pre-cleaner cyclone dust was significantly larger than the collector box dust, indicating that the pre-cleaner functioned properly in removing the larger dust size fraction from the airstream. However, the pre-cleaner dust still contained a substantial amount of respirable dust. It was concluded that in order to maintain the effectiveness of a roof bolter dust collector, periodic removal of dust is required. Appropriate work procedures and equipment are necessary to minimize exposure during this cleaning task. 13 refs., 3 tabs., 2 figs.

  19. Lung function reduction and chronic respiratory symptoms among workers in the cement industry: a follow up study

    Directory of Open Access Journals (Sweden)

    Zeleke Zeyede K

    2011-11-01

    Full Text Available Abstract Background There are only a few follow-up studies of respiratory function among cement workers. The main aims of this study were to measure total dust exposure, to examine chronic respiratory symptoms and changes in lung function among cement factory workers and controls that were followed for one year. Methods The study was conducted in two cement factories in Ethiopia. Totally, 262 personal measurements of total dust among 105 randomly selected workers were performed. Samples of total dust were collected on 37-mm cellulose acetate filters placed in closed faced Millipore-cassettes. Totally 127 workers; 56 cleaners, 44 cement production workers and 27 controls were randomly selected from two factories and examined for lung function and interviewed for chronic respiratory symptoms in 2009. Of these, 91 workers; 38 cement cleaners (mean age 32 years, 33 cement production workers (36 years and 20 controls (38 years were examined with the same measurements in 2010. Results Total geometric mean dust exposure among cleaners was 432 mg/m3. The fraction of samples exceeding the Threshold Limit Value (TLV of 10 mg/m3 for the cleaners varied from 84-97% in the four departments. The levels were considerably lower among the production workers (GM = 8.2 mg/m3, but still 48% exceeded 10 mg/m3. The prevalence of all the chronic respiratory symptoms among both cleaners and production workers was significantly higher than among the controls. Forced Expiratory Volume in one second (FEV1 and FEV1/Forced Vital Capacity (FEV1/FVC were significantly reduced from 2009 to 2010 among the cleaners (p Conclusions The high prevalence of chronic respiratory symptoms and reduction in lung function is probably associated with high cement dust exposure. Preventive measures are needed to reduce the dust exposure.

  20. Proposal of an environmental performance index to assess solid waste treatment technologies

    International Nuclear Information System (INIS)

    Goulart Coelho, Hosmanny Mauro; Lange, Liséte Celina; Coelho, Lineker Max Goulart

    2012-01-01

    Highlights: ► Proposal of a new concept in waste management: Cleaner Treatment. ► Development of an index to assess quantitatively waste treatment technologies. ► Delphi Method was carried out so as to define environmental indicators. ► Environmental performance evaluation of waste-to-energy plants. - Abstract: Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation.

  1. An optimal thermal condition for maximal chlorophyll extraction

    Directory of Open Access Journals (Sweden)

    Fu Jia-Jia

    2017-01-01

    Full Text Available This work describes an environmentally friendly process for chlorophyll extraction from bamboo leaves. Shaking water bath and ultrasound cleaner are adopted in this technology, and the influence of temperature of the water bath and ultrasonic cleaner is evaluated. Results indicated that there is an optimal condition for maximal yield of chlorophyll.

  2. 75 FR 21244 - Procurement List; Proposed Additions and Deletions

    Science.gov (United States)

    2010-04-23

    ... List for production by the nonprofit agencies listed: Products NSN: MR 987--Towel, Super Absorbent... Agency, Fort Lee, VA. NSN: 7930-00-NIB-0553--TriBase Multi-Purpose Cleaner, 2 liter, 4/BX. NSN: 7930-00-NIB-0554--TriBase Multi-Purpose Cleaner, 55 gallon drum, 1 DR. NSN: 7930-00-NIB-0555--BioRenewable...

  3. Vehicle Emissions Risk Management

    International Nuclear Information System (INIS)

    Ibrahem, L.G.

    2004-01-01

    Vehicle emissions are considered as a main source for air pollution. Emissions regulation is now well developed in most countries to meet cleaner air quality. Reducing emissions by using cleaner fuels, which meet certain specification, is not enough to get cleaner air, yet the vehicle technology is not improved. Here we will outline the following: - development in fuel specification and emissions regulation. main facts linking vehicle emissions, fuel properties and air quality. catalytic converter technology. Emissions sources: In modem cities, vehicle traffic is potentially a major source of emissions. However sometimes other sources of emissions from industry and other stationary sources can be equally important and include emissions that are of greater toxicity than those from vehicles

  4. The Delicate Cycle

    Science.gov (United States)

    Galloway, Melinda

    2006-01-01

    There are two types of parenting styles when it comes to parent involvement in their children's education: the "hovering" type and the "dry cleaner" type. Hovering parents are always on hand for every landmark moment of their children while dry cleaner parents show up only when an emergency is imminent. In this article, the author relates her own…

  5. Integrated environmental management of wastewater discharged from a cluster of five textile factories

    International Nuclear Information System (INIS)

    El-Gohary, F. A.; Nasr, F. A.; Abdel Baset, N.; Shoush, M.; Ali, H. I.

    2009-01-01

    The study focuses on the cleaner production opportunities for a cluster of five factories discharging their wastewater into agricultural drain prior to wastewater treatment the financial and environmental benefits accrued upon the implementation of the proposed cleaner production schemes have been estimated. This was followed by a laboratory study to propose the appropriate treatment system. (Author)

  6. Dynamics of sustained use and abandonment of clean cooking systems: study protocol for community-based system dynamics modeling.

    Science.gov (United States)

    Kumar, Praveen; Chalise, Nishesh; Yadama, Gautam N

    2016-04-26

    More than 3 billion of the world's population are affected by household air pollution from relying on unprocessed solid fuels for heating and cooking. Household air pollution is harmful to human health, climate, and environment. Sustained uptake and use of cleaner cooking technologies and fuels are proposed as solutions to this problem. In this paper, we present our study protocol aimed at understanding multiple interacting feedback mechanisms involved in the dynamic behavior between social, ecological, and technological systems driving sustained use or abandonment of cleaner cooking technologies among the rural poor in India. This study uses a comparative case study design to understand the dynamics of sustained use or abandonment of cleaner cooking technologies and fuels in four rural communities of Rajasthan, India. The study adopts a community based system dynamics modeling approach. We describe our approach of using community based system dynamics with rural communities to delineate the feedback mechanisms involved in the uptake and sustainment of clean cooking technologies. We develop a reference mode with communities showing the trend over time of use or abandonment of cleaner cooking technologies and fuels in these communities. Subsequently, the study develops a system dynamics model with communities to understand the complex sub-systems driving the behavior in these communities as reflected in the reference mode. We use group model building techniques to facilitate participation of relevant stakeholders in the four communities and elicit a narrative describing the feedback mechanisms underlying sustained adoption or abandonment of cleaner cooking technologies. In understanding the dynamics of feedback mechanisms in the uptake and exclusive use of cleaner cooking systems, we increase the likelihood of dissemination and implementation of efficacious interventions into everyday settings to improve the health and wellbeing of women and children most affected

  7. United States Air Force Graduate Student Research Program. 1989 Program Technical Report. Volume 3

    Science.gov (United States)

    1989-12-01

    Dyca-l and :,W -sment iFME <Qt~c-Sn aop4 ica and txo glass Wh~omer L~rir-c cements: Shofu liin cement and XR iwncmqr lint rnM.7. 7i meL-in Vi traond...untiring efforts were greatly appreciated. 104-3 INTRODUCT IN: Pism 0_C Cval (Caulkli Cavalite (Kerr), (ES Ketac-bond applicap, Shofu lining cement, XR ...release of fluoride from the restored portions of the tooth to surrounding tooth structure. Teet- normally consist of hydroxyapatite c-ystals, After a

  8. An empirical method for determination of elemental components of radiated powers and impurity concentrations from VUV and XUV spectral features in tokamak plasmas

    International Nuclear Information System (INIS)

    Lawson, K.; Peacock, N.; Gianella, R.

    1998-12-01

    The derivation of elemental components of radiated powers and impurity concentrations in bulk tokamak plasmas is complex, often requiring a full description of the impurity transport. A novel, empirical method, the Line Intensity Normalization Technique (LINT) has been developed on the JET (Joint European Torus) tokamak to provide routine information about the impurity content of the plasma and elemental components of radiated power (P rad ). The technique employs a few VUV and XUV resonance line intensities to represent the intrinsic impurity elements in the plasma. From a data base comprising these spectral features, the total bolometric measurement of the radiated power and the Z eff measured by visible spectroscopy, separate elemental components of P rad and Z eff are derived. The method, which converts local spectroscopic signals into global plasma parameters, has the advantage of simplicity, allowing large numbers of pulses to be processed, and, in many operational modes of JET, is found to be both reliable and accurate. It relies on normalizing the line intensities to the absolute calibration of the bolometers and visible spectrometers, using coefficients independent of density and temperature. Accuracies of the order of ± 15% can be achieved for the elemental P rad components of the most significant impurities and the impurity concentrations can be determined to within ±30%. Trace elements can be monitored, although with reduced accuracy. The present paper deals with limiter discharges, which have been the main application to date. As a check on the technique and to demonstrate the value of the LINT results, they have been applied to the transport modelling of intrinsic impurities carried out with the SANCO transport code, which uses atomic data from ADAS. The simulations provide independent confirmation of the concentrations empirically derived using the LINT technique. For this analysis, the simple case of the L-mode regime is considered, the chosen

  9. Lecithins - promising oil spill cleaner?

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    A new, non-polluting method of cleaning up oil spills at sea as well as on land has been developed by researchers at the Hebrew University of Jerusalem. Their technique is based on the use of lecithins, a byproduct of producing edible oils from plants. Lecithin molecules are hydrophyllic at one end and lipophilic at their tail ends. When they come into contact with water, they organize themselves into bilayers whose heads all face the water and whose tails are all directed towards each other. These bilayers form particles called liposomes that, when spread on water fouled by oil spills, change the properties of the oil thereby stopping the spreading and breaking it down into sticky droplets that continue to float on the surface and can be easily collected. The treatment is said to be effective in both fresh and salt water and is almost temperature and pH independent. Another beneficial effect is that the physical change generated by liposomes in the spilled oil improves the ability of oil-eating bacteria in the water to remove some of the spill by bioremediation

  10. Indoor plants as air cleaners

    DEFF Research Database (Denmark)

    Dela Cruz, Majbrit; Christensen, Jan H.; Müller, Renate

    2015-01-01

    Plants have been used decoratively indoors for centuries. For the last 25-30 years, their beneficial abilities to reduce the levels of harmful volatile organic compounds (VOCs) from the indoor air have also been investigated. Previous studies have shown that VOCs are removed by the plant itself...... experiments is not directly transferrable to real life settings. The largest problem is the use of closed chambers where there is no air exchange. This also results in a declining VOC concentration over time. Due to this limitation, we constructed a new experimental system which among others can allow for air...... exchange and a constant VOC concentration. With the new system it was found that removal rates obtained in chambers with air exchange and constant VOC concentration were significantly higher than removal rates obtained in closed chambers. This means that removal rates obtained in closed chambers may...

  11. Providing cleaner air to Canadians

    International Nuclear Information System (INIS)

    2001-02-01

    This booklet is designed to explain salient aspects of the Ozone Annex, negotiated and signed recently by Canada and the United States, in a joint effort to improve air quality in North America. By significantly reducing the transboundary flows of air pollutants that cause smog, the Ozone Annex will benefit some 16 million people in central and eastern Canada and provide an example for a future round of negotiations to address concerns of the millions of Canadians and Americans who live in the border area between British Columbia and Washington State. The brochure provide summaries of the Canadian and American commitments, focusing on transportation, monitoring and reporting. The Ozone Annex complements other air quality initiatives by the Government of Canada enacted under the Environmental Protection Act, 1999. These measures include regulations to reduce sulphur content to 30 parts per million by Jan 1, 2005; proposing to restrict toxic particulate matter (PM) to less than 10 microns; establishing daily smog forecasts in the Maritimes and committing to a national program built upon existing smog advisories and forecasts in Quebec, Ontario and British Columbia; and investing in more clean air research through the newly created Canadian Foundation for Climate and Atmospheric Sciences

  12. Catalytic processes for cleaner fuels

    International Nuclear Information System (INIS)

    Catani, R.; Marchionna, M.; Rossini, S.

    1999-01-01

    More stringent limitations on vehicle emissions require different measurement: fuel reformulation is one of the most important and is calling for a noticeable impact on refinery assets. Composition rangers of the future fuels have been defined on a time scale. In this scenario the evolution of catalytic technologies becomes a fundamental tool for allowing refinery to reach the fixed-by-law targets. In this paper, the refinery process options to meet each specific requirements of reformulated fuels are surveyed [it

  13. Off gas film cooler cleaner

    Science.gov (United States)

    Dhingra, Hardip S.; Koch, William C.; Burns, David C.

    1997-01-01

    An apparatus for cleaning depositions of particulate matter from the inside of tubular piping while the piping is in use. The apparatus is remote controlled in order to operate in hazardous environments. A housing containing brush and shaft assemblies is mounted on top of the tubular piping. Pneumatic cylinders provide linear motion. A roller nut bearing provides rotary motion. The combined motion causes the brush assembly to rotate as it travels along the tube dislodging particulate matter.

  14. Cleaner aero-engines taking off

    International Nuclear Information System (INIS)

    Lothigius, J.

    1991-01-01

    Airlines operating on domestic routes in Sweden have to pay taxes on their emissions of nitrogen oxides, hydrocarbons and carbon dioxide. These taxes have spurred improvements in engine design, but are unlikely to slow the growth in air traffic

  15. Energy efficiency and cleaner production

    International Nuclear Information System (INIS)

    Konstantinoff, M.; Grozeva, Iv.

    1999-01-01

    Energy is the fundamental driver of the economic growth in the todays society. It is an absolute prerequisite for the industrial development in the developed countries as well as for improving the quality of life and reducing the poverty in the developing world. It is expected that the energy demand in the developing countries will increase rapidly in the next decades, and will even exceed the level of consumption in the rich countries due to rising population and incomes. The burning of fossil fuel, however, inevitably leads to negative environmental impact, which no longer can be neglected

  16. Model-Driven Engineering of Machine Executable Code

    Science.gov (United States)

    Eichberg, Michael; Monperrus, Martin; Kloppenburg, Sven; Mezini, Mira

    Implementing static analyses of machine-level executable code is labor intensive and complex. We show how to leverage model-driven engineering to facilitate the design and implementation of programs doing static analyses. Further, we report on important lessons learned on the benefits and drawbacks while using the following technologies: using the Scala programming language as target of code generation, using XML-Schema to express a metamodel, and using XSLT to implement (a) transformations and (b) a lint like tool. Finally, we report on the use of Prolog for writing model transformations.

  17. A PC Program to Calculate the One-Sided Lower Tolerance Limit for Total Ionizing Dose Radiation Data

    Science.gov (United States)

    1991-08-01

    include <graphics .h> #define VEDIO OxlO #define ESC 27 1* Decelerations * FILE *pfile; FILE *outf; FILE *inf; mnt n; mnt un; float max scale...regs.h.ah=2; regs .h.dh=y; regs .h.dl=x; regs .h.bh=O; int86( VEDIO , ®s, ®s); char attribute(char blink, char back-color,char intensity, char...set lint mode) union REGS regs; regs.h.ah=O; regs h a l-mode; int86( VEDIO , ®s, ®s); void str-color (char x, char y, char *str, char blink, char

  18. Turbulent Mixing and Combustion for High-Speed Air-Breathing Propulsion Application

    Science.gov (United States)

    2007-08-12

    viscous calculation .it Ott ~= 0.5 (left) and I./(/= 1.4 (right 1. bihluc lines,) at Re=70( and UI./= I .0. 066307-7 BERGTIIORSC)N ct ed. P~HYSICAL RFNEWlEV...a ttd I /d= 1 4 (dash- error fuineti ott 111111- aind inca-sured. % . eloci ties. nornual i/ed by ttOtU ble- dlotted linte)I. the Bernoulli velocitv...binned to 344 x 260 pix 2; a binned pixel yields good profile statistics. maps into 46 pim in the flow). A 70 ns gate time re- Figure 3 shows an

  19. PENERAPAN PRODUKSI BERSIH UNTUK PENANGANAN AIR TERPRODUKSI DI INDUSTRI MINYAK DAN GAS

    Directory of Open Access Journals (Sweden)

    Sillak Hasiany

    2015-07-01

    Full Text Available Produced water is the largest volume waste from oil and gas productions especially from old well and had a complex mixture of organic and inorganic compounds like BTX, phenol, and TDS. The untreated produced water discharges may be harmful to the surrounding environment, so is necessary to have produced water management that tend to have  reduce a risk for the enviroment and human. Cleaner Production (CP is a continuous application of an integrated, preventive, environmental management strategy to increase overall efficiency and to reduce risks to humans and environment. the aims of this research are (1 identify cleaner production opportunities from produced water management  which can be implemented in company (2 solved a problem from existing produced water management. Research can be done by primary and secondary data collecting direct field observation, and laboratory analyze of produced water. Analysis were done by using Quick Scan that consisted in two phase, preparation and implementation, evaluation of Cleaner Production opportunities and evaluation of environmental and economic assessment. The result showed that Produced water is the largest volume waste from oil and gas production with a total value worth 3.939.370 barel for 2012 and also water injection is the most effectif and effcien technology to manage produced water than those other surface discharge methods for company. Replacement of produced water pipes from type B to type A is the application of Cleaner Production opportunities in companies that benefit from the economic and environmental. Keywords: produced water, cleaner production, water injection

  20. Commercial Cleaning Products for Chemical Decontamination: A Scoping Study

    Science.gov (United States)

    2014-05-01

    and may injure human skin without dilution), although this approach is less favoured in a mass casualty decontamination situation than soap and water...commercial cleaning products, full strength K-O-K® liquid bleach (5.25% aqueous solution of NaOCl), dish-washing detergent Cascade® with Extra...Bleach Action Gel, OxiClean® Versatile Stain Remover Powder, and ZEP® Industrial Purple liquid cleaner (proprietary caustic cleaner containing

  1. Electricity From Wind for Off-Grid Applications in Bangladesh: a Techno-Economic Assessment

    OpenAIRE

    Rahman, Md. Mustafizur; Baky, Md Abdullah Hil; Islam, A.K.M. Sadrul

    2017-01-01

    Global GHG (greenhouse gas) emissions are increasing substantially and electricity sector is one of the key contributors to the world’s total GHG emissions. GHG emissions cause ozone layer depletion and global warming. Different policy regulation agencies are adopting regulations to reduce GHG emissions in various sectors. People already have started power generation from cleaner sources. Renewable energy sources can provide cleaner electricity. Bangladesh is a densely populated country and m...

  2. Proposal of an environmental performance index to assess solid waste treatment technologies.

    Science.gov (United States)

    Coelho, Hosmanny Mauro Goulart; Lange, Liséte Celina; Coelho, Lineker Max Goulart

    2012-07-01

    Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different treatment plants being an excellent quantitative tool to support Cleaner Treatment implementation. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. EPHECT I: European household survey on domestic use of consumer products and development of worst-case scenarios for daily use.

    Science.gov (United States)

    Dimitroulopoulou, C; Lucica, E; Johnson, A; Ashmore, M R; Sakellaris, I; Stranger, M; Goelen, E

    2015-12-01

    Consumer products are frequently and regularly used in the domestic environment. Realistic estimates for product use are required for exposure modelling and health risk assessment. This paper provides significant data that can be used as input for such modelling studies. A European survey was conducted, within the framework of the DG Sanco-funded EPHECT project, on the household use of 15 consumer products. These products are all-purpose cleaners, kitchen cleaners, floor cleaners, glass and window cleaners, bathroom cleaners, furniture and floor polish products, combustible air fresheners, spray air fresheners, electric air fresheners, passive air fresheners, coating products for leather and textiles, hair styling products, spray deodorants and perfumes. The analysis of the results from the household survey (1st phase) focused on identifying consumer behaviour patterns (selection criteria, frequency of use, quantities, period of use and ventilation conditions during product use). This can provide valuable input to modelling studies, as this information is not reported in the open literature. The above results were further analysed (2nd phase), to provide the basis for the development of 'most representative worst-case scenarios' regarding the use of the 15 products by home-based population groups (housekeepers and retired people), in four geographical regions in Europe. These scenarios will be used for the exposure and health risk assessment within the EPHECT project. To the best of our knowledge, it is the first time that daily worst-case scenarios are presented in the scientific published literature concerning the use of a wide range of 15 consumer products across Europe. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

  4. Performance evaluation of drip-fertigated cotton grown under different plant densities using nuclear techniques

    International Nuclear Information System (INIS)

    Janat, M.; Kalhout, A.

    2007-04-01

    Field experiment was conducted over two growing seasons to assess different planting densities of cotton variety Aleppo 118 (71.000, 57.000, 48.000, 41.000, 33.500 plants /ha), and two irrigation systems; one irrigation line per one planting row and one irrigation line per two planting rows. Nitrogen fertilizer (120 kg N/ha) as Urea (46% N) was injected through the irrigation system in six equally split applications. A labeled area (1.0 m 2 ) was established for the labeled sub plots and labeled Urea was applied to the labeled sub plots in the same manner as for unlabeled N fertilizer. Irrigation scheduling was accomplished using the direct method of neutron scattering technique. Irrigation was determined when the soil moisture content in the active root depth reached almost 80% of the field capacity. The amount of water applied for one line / one row were 6738 and 9149 m 3 /ha, whereas, for one line/two rows were 7489 and 12653 m 3 / ha for the two growing seasons 2004 and 2005 respectively. The objectives of the experiment were to evaluate the effect of different planting densities and two irrigation system on cotton yield, lint properties, dry matter yield, N-uptake, chlorophyll content and leaf area. The experimental design was randomized block design with 6 replications for each irrigation method. Results revealed that no significant differences between all different plant densities were recorded for all growth parameters tested in this study such as seed cotton yield, dry matter yield, lint properties, chlorophyll content and leaf area.(author)

  5. Box-Cox transformation for resolving Peelle's Pertinent Puzzle in curve fitting

    International Nuclear Information System (INIS)

    Oh, Soo-Youl

    2003-01-01

    Incorporating the Box-Cox transformation into a least-squares method is presented as one of resolutions of an anomaly known as Peelle's Pertinent Puzzle. The transformation is a strategy to make non-normal distribution data resemble normal data. A procedure is proposed: transform the measured raw data with an optimized Box-Cox transformation parameter, fit the transformed data using a usual curve fitting method, then inverse-transform the fitted results to final estimates. The generalized least-squares method utilized in GMA is adopted as the curve fitting tool for the test of proposed procedure. In the procedure, covariance matrices are correspondingly transformed and inverse-transformed with the aid of error propagation law. In addition to a sensible answer to the Peelle's problem itself, the procedure resulted in reasonable estimates of 6 Li(n,t) cross sections in several to 800 keV energy region. Meanwhile, comparisons of the present procedure with that of Chiba and Smith show that both procedures yield estimates so close each other for the sample evaluation on 6 Li(n,t) above as well as for the Peelle's problem. Two procedures, however, are conceptually very different and further discussions would be needed for a consensus on this issue of resolving the Puzzle. It is also pointed out that the transformation is applicable not only to a least-squares method but also to other parameter estimation method such as a usual Bayesian approach formulated with an assumption of normality of the probability density function. (author)

  6. Heavy flavour decay muon production at forward rapidity in proton-proton collisions at $\\sqrt{s}$ = 7 TeV

    CERN Document Server

    Abelev, Betty; Adamova, Dagmar; Adare, Andrew Marshall; Aggarwal, Madan; Aglieri Rinella, Gianluca; Agocs, Andras Gabor; Agostinelli, Andrea; Aguilar Salazar, Saul; Ahammed, Zubayer; Ahmad, Arshad; Ahmad, Nazeer; Ahn, Sang Un; Akindinov, Alexander; Aleksandrov, Dmitry; Alessandro, Bruno; Alfaro Molina, Jose Ruben; Alici, Andrea; Alkin, Anton; Almaraz Avina, Erick Jonathan; Alme, Johan; Alt, Torsten; Altini, Valerio; Altinpinar, Sedat; Altsybeev, Igor; Andrei, Cristian; Andronic, Anton; Anguelov, Venelin; Anielski, Jonas; Anticic, Tome; Antinori, Federico; Antonioli, Pietro; Aphecetche, Laurent Bernard; Appelshauser, Harald; Arbor, Nicolas; Arcelli, Silvia; Arend, Andreas; Armesto, Nestor; Arnaldi, Roberta; Aronsson, Tomas Robert; Arsene, Ionut Cristian; Arslandok, Mesut; Asryan, Andzhey; Augustinus, Andre; Averbeck, Ralf Peter; Awes, Terry; Aysto, Juha Heikki; Azmi, Mohd Danish; Bach, Matthias Jakob; Badala, Angela; Baek, Yong Wook; Bailhache, Raphaelle Marie; Bala, Renu; Baldini Ferroli, Rinaldo; Baldisseri, Alberto; Baldit, Alain; Baltasar Dos Santos Pedrosa, Fernando; Ban, Jaroslav; Baral, Rama Chandra; Barbera, Roberto; Barile, Francesco; Barnafoldi, Gergely Gabor; Barnby, Lee Stuart; Barret, Valerie; Bartke, Jerzy Gustaw; Basile, Maurizio; Bastid, Nicole; Bathen, Bastian; Batigne, Guillaume; Batyunya, Boris; Baumann, Christoph Heinrich; Bearden, Ian Gardner; Beck, Hans; Belikov, Iouri; Bellini, Francesca; Bellwied, Rene; Belmont-Moreno, Ernesto; Bencedi, Gyula; Beole, Stefania; Berceanu, Ionela; Bercuci, Alexandru; Berdnikov, Yaroslav; Berenyi, Daniel; Bergmann, Cyrano; Berzano, Dario; Betev, Latchezar; Bhasin, Anju; Bhati, Ashok Kumar; Bianchi, Livio; Bianchi, Nicola; Bianchin, Chiara; Bielcik, Jaroslav; Bielcikova, Jana; Bilandzic, Ante; Bjelogrlic, Sandro; Blanco, F; Blanco, Francesco; Blau, Dmitry; Blume, Christoph; Bock, Nicolas; Bogdanov, Alexey; Boggild, Hans; Bogolyubsky, Mikhail; Boldizsar, Laszlo; Bombara, Marek; Book, Julian; Borel, Herve; Borissov, Alexander; Bose, Suvendu Nath; Bossu, Francesco; Botje, Michiel; Bottger, Stefan; Boyer, Bruno Alexandre; Braun-Munzinger, Peter; Bregant, Marco; Breitner, Timo Gunther; Browning, Tyler Allen; Broz, Michal; Brun, Rene; Bruna, Elena; Bruno, Giuseppe Eugenio; Budnikov, Dmitry; Buesching, Henner; Bufalino, Stefania; Bugaiev, Kyrylo; Busch, Oliver; Buthelezi, Edith Zinhle; Caballero Orduna, Diego; Caffarri, Davide; Cai, Xu; Caines, Helen Louise; Calvo Villar, Ernesto; Camerini, Paolo; Canoa Roman, Veronica; Cara Romeo, Giovanni; Carena, Francesco; Carena, Wisla; Carminati, Federico; Casanova Diaz, Amaya Ofelia; Caselle, Michele; Castillo Castellanos, Javier Ernesto; Casula, Ester Anna Rita; Catanescu, Vasile; Cavicchioli, Costanza; Cepila, Jan; Cerello, Piergiorgio; Chang, Beomsu; Chapeland, Sylvain; Charvet, Jean-Luc Fernand; Chattopadhyay, Sukalyan; Chattopadhyay, Subhasis; Cherney, Michael Gerard; Cheshkov, Cvetan; Cheynis, Brigitte; Chiavassa, Emilio; Chibante Barroso, Vasco Miguel; Chinellato, David; Chochula, Peter; Chojnacki, Marek; Christakoglou, Panagiotis; Christensen, Christian Holm; Christiansen, Peter; Chujo, Tatsuya; Chung, Suh-Urk; Cicalo, Corrado; Cifarelli, Luisa; Cindolo, Federico; Cleymans, Jean Willy Andre; Coccetti, Fabrizio; Coffin, Jean-Pierre Michel; Colamaria, Fabio; Colella, Domenico; Conesa Balbastre, Gustavo; Conesa del Valle, Zaida; Constantin, Paul; Contin, Giacomo; Contreras, Jesus Guillermo; Cormier, Thomas Michael; Corrales Morales, Yasser; Cortes Maldonado, Ismael; Cortese, Pietro; Cosentino, Mauro Rogerio; Costa, Filippo; Cotallo, Manuel Enrique; Crochet, Philippe; Cruz Alaniz, Emilia; Cuautle, Eleazar; Cunqueiro, Leticia; D'Erasmo, Ginevra; Dainese, Andrea; Dalsgaard, Hans Hjersing; Danu, Andrea; Das, Debasish; Das, Indranil; Das, Kushal; Dash, Ajay Kumar; Dash, Sadhana; De, Sudipan; De Azevedo Moregula, Andrea; de Barros, Gabriel; De Caro, Annalisa; de Cataldo, Giacinto; de Cuveland, Jan; De Falco, Alessandro; De Gruttola, Daniele; De Marco, Nora; De Pasquale, Salvatore; de Rooij, Raoul Stefan; Del Castillo Sanchez, Eduardo; Delagrange, Hugues; Deloff, Andrzej; Demanov, Vyacheslav; Denes, Ervin; Deppman, Airton; Di Bari, Domenico; Di Giglio, Carmelo; Di Liberto, Sergio; Di Mauro, Antonio; Di Nezza, Pasquale; Dietel, Thomas; Divia, Roberto; Djuvsland, Oeystein; Dobrin, Alexandru Florin; Dobrowolski, Tadeusz Antoni; Dominguez, Isabel; Donigus, Benjamin; Dordic, Olja; Driga, Olga; Dubey, Anand Kumar; Ducroux, Laurent; Dupieux, Pascal; Dutta Majumdar, AK; Dutta Majumdar, Mihir Ranjan; Elia, Domenico; Emschermann, David Philip; Engel, Heiko; Erdal, Hege Austrheim; Espagnon, Bruno; Estienne, Magali Danielle; Esumi, Shinichi; Evans, David; Eyyubova, Gyulnara; Fabris, Daniela; Faivre, Julien; Falchieri, Davide; Fantoni, Alessandra; Fasel, Markus; Fearick, Roger Worsley; Fedunov, Anatoly; Fehlker, Dominik; Feldkamp, Linus; Felea, Daniel; Fenton-Olsen, Bo; Feofilov, Grigory; Fernandez Tellez, Arturo; Ferretti, Alessandro; Ferretti, Roberta; Figiel, Jan; Figueredo, Marcel; Filchagin, Sergey; Fini, Rosa Anna; Finogeev, Dmitry; Fionda, Fiorella; Fiore, Enrichetta Maria; Floris, Michele; Foertsch, Siegfried Valentin; Foka, Panagiota; Fokin, Sergey; Fragiacomo, Enrico; Fragkiadakis, Michail; Frankenfeld, Ulrich Michael; Fuchs, Ulrich; Furget, Christophe; Fusco Girard, Mario; Gaardhoje, Jens Joergen; Gagliardi, Martino; Gago, Alberto; Gallio, Mauro; Gangadharan, Dhevan Raja; Ganoti, Paraskevi; Garabatos, Jose; Garcia-Solis, Edmundo; Garishvili, Irakli; Gerhard, Jochen; Germain, Marie; Geuna, Claudio; Gheata, Andrei George; Gheata, Mihaela; Ghidini, Bruno; Ghosh, Premomoy; Gianotti, Paola; Girard, Martin Robert; Giubellino, Paolo; Gladysz-Dziadus, Ewa; Glassel, Peter; Gomez, Ramon; Gonzalez Ferreiro, Elena; Gonzalez-Trueba, Laura Helena; Gonzalez-Zamora, Pedro; Gorbunov, Sergey; Goswami, Ankita; Gotovac, Sven; Grabski, Varlen; Graczykowski, Lukasz Kamil; Grajcarek, Robert; Grelli, Alessandro; Grigoras, Alina Gabriela; Grigoras, Costin; Grigoriev, Vladislav; Grigoryan, Ara; Grigoryan, Smbat; Grinyov, Boris; Grion, Nevio; Grosse-Oetringhaus, Jan Fiete; Grossiord, Jean-Yves; Grosso, Raffaele; Guber, Fedor; Guernane, Rachid; Guerra Gutierrez, Cesar; Guerzoni, Barbara; Guilbaud, Maxime Rene Joseph; Gulbrandsen, Kristjan Herlache; Gunji, Taku; Gupta, Anik; Gupta, Ramni; Gutbrod, Hans; Haaland, Oystein Senneset; Hadjidakis, Cynthia Marie; Haiduc, Maria; Hamagaki, Hideki; Hamar, Gergoe; Hanratty, Luke David; Hansen, Alexander; Harmanova, Zuzana; Harris, John William; Hartig, Matthias; Hasegan, Dumitru; Hatzifotiadou, Despoina; Hayrapetyan, Arsen; Heckel, Stefan Thomas; Heide, Markus Ansgar; Helstrup, Haavard; Herghelegiu, Andrei Ionut; Herrera Corral, Gerardo Antonio; Herrmann, Norbert; Hetland, Kristin Fanebust; Hicks, Bernard; Hille, Per Thomas; Hippolyte, Boris; Horaguchi, Takuma; Hori, Yasuto; Hristov, Peter Zahariev; Hrivnacova, Ivana; Huang, Meidana; Huber, Sebastian Bernd; Humanic, Thomas; Hwang, Dae Sung; Ichou, Raphaelle; Ilkaev, Radiy; Ilkiv, Iryna; Inaba, Motoi; Incani, Elisa; Innocenti, Gian Michele; Ippolitov, Mikhail; Irfan, Muhammad; Ivan, Cristian George; Ivanov, Andrey; Ivanov, Marian; Ivanov, Vladimir; Ivanytskyi, Oleksii; Jacholkowski, Adam Wlodzimierz; Jacobs, Peter; Jancurova, Lucia; Jangal, Swensy Gwladys; Janik, Malgorzata Anna; Janik, Rudolf; Jayarathna, Sandun; Jena, Satyajit; Jimenez Bustamante, Raul Tonatiuh; Jirden, Lennart; Jones, Peter Graham; Jung, Hyung Taik; Jung, Won Woong; Jusko, Anton; Kakoyan, Vanik; Kalcher, Sebastian; Kalinak, Peter; Kalisky, Matus; Kalliokoski, Tuomo Esa Aukusti; Kalweit, Alexander Philipp; Kanaki, Kalliopi; Kang, Ju Hwan; Kaplin, Vladimir; Karasu Uysal, Ayben; Karavichev, Oleg; Karavicheva, Tatiana; Karpechev, Evgeny; Kazantsev, Andrey; Kebschull, Udo Wolfgang; Keidel, Ralf; Khan, Mohisin Mohammed; Khan, Palash; Khan, Shuaib Ahmad; Khanzadeev, Alexei; Kharlov, Yury; Kileng, Bjarte; Kim, Beomkyu; Kim, Dong Jo; Kim, Do Won; Kim, Jonghyun; Kim, Jin Sook; Kim, Minwoo; Kim, Se Yong; Kim, Seon Hee; Kim, Taesoo; Kirsch, Stefan; Kisel, Ivan; Kiselev, Sergey; Kisiel, Adam Ryszard; Klay, Jennifer Lynn; Klein, Jochen; Klein-Bosing, Christian; Kliemant, Michael; Kluge, Alexander; Knichel, Michael Linus; Koch, Kathrin; Kohler, Markus; Kolojvari, Anatoly; Kondratiev, Valery; Kondratyeva, Natalia; Konevskih, Artem; Korneev, Andrey; Kottachchi Kankanamge Don, Chamath; Kour, Ravjeet; Kowalski, Marek; Kox, Serge; Koyithatta Meethaleveedu, Greeshma; Kral, Jiri; Kralik, Ivan; Kramer, Frederick; Kraus, Ingrid Christine; Krawutschke, Tobias; Krelina, Michal; Kretz, Matthias; Krivda, Marian; Krizek, Filip; Krus, Miroslav; Kryshen, Evgeny; Krzewicki, Mikolaj; Kucheriaev, Yury; Kuhn, Christian Claude; Kuijer, Paul; Kurashvili, Podist; Kurepin, A; Kurepin, AB; Kuryakin, Alexey; Kushpil, Svetlana; Kushpil, Vasily; Kweon, Min Jung; Kwon, Youngil; La Rocca, Paola; Ladron de Guevara, Pedro; Lakomov, Igor; Langoy, Rune; Lara, Camilo Ernesto; Lardeux, Antoine Xavier; Lazzeroni, Cristina; Le Bornec, Yves; Lea, Ramona; Lechman, Mateusz; Lee, Ki Sang; Lee, Sung Chul; Lefevre, Frederic; Lehnert, Joerg Walter; Leistam, Lars; Lenhardt, Matthieu Laurent; Lenti, Vito; Leon Monzon, Ildefonso; Leon Vargas, Hermes; Leoncino, Marco; Levai, Peter; Li, Xiaomei; Lien, Jorgen; Lietava, Roman; Lindal, Svein; Lindenstruth, Volker; Lippmann, Christian; Lisa, Michael Annan; Liu, Lijiao; Loenne, Per-Ivar; Loggins, Vera; Loginov, Vitaly; Lohn, Stefan Bernhard; Lohner, Daniel; Loizides, Constantinos; Loo, Kai Krister; Lopez, Xavier Bernard; Lopez Torres, Ernesto; Lovhoiden, Gunnar; Lu, Xianguo; Luettig, Philipp; Lunardon, Marcello; Luo, Jiebin; Luparello, Grazia; Luquin, Lionel; Luzzi, Cinzia; Ma, Rongrong; Maevskaya, Alla; Mager, Magnus; Mahapatra, Durga Prasad; Maire, Antonin; Mal'Kevich, Dmitry; Malaev, Mikhail; Maldonado Cervantes, Ivonne Alicia; Malinina, Ludmila; Malzacher, Peter; Mamonov, Alexander; Manceau, Loic Henri Antoine; Manko, Vladislav; Manso, Franck; Manzari, Vito; Mao, Yaxian; Marchisone, Massimiliano; Mares, Jiri; Margagliotti, Giacomo Vito; Margotti, Anselmo; Marin, Ana Maria; Markert, Christina; Martashvili, Irakli; Martinengo, Paolo; Martinez, Mario Ivan; Martinez Davalos, Arnulfo; Martinez Garcia, Gines; Martynov, Yevgen; Mas, Alexis Jean-Michel; Masciocchi, Silvia; Masera, Massimo; Maslov, Nikolai; Masoni, Alberto; Mastromarco, Mario; Mastroserio, Annalisa; Matthews, Zoe Louise; Matyja, Adam Tomasz; Mayani, Daniel; Mayer, Christoph; Mazer, Joel; Mazzoni, Alessandra Maria; Meddi, Franco; Menchaca-Rocha, Arturo Alejandro; Mercado Perez, Jorge; Meres, Michal; Miake, Yasuo; Michalon, Alain; Milano, Leonardo; Milosevic, Jovan; Mischke, Andre; Mishra, Aditya Nath; Miskowiec, Dariusz; Mitu, Ciprian Mihai; Mlynarz, Jocelyn; Mohanty, Ajit Kumar; Mohanty, Bedangadas; Molnar, Levente; Montano Zetina, Luis Manuel; Monteno, Marco; Montes, Esther; Moon, Taebong; Morando, Maurizio; Moreira De Godoy, Denise Aparecida; Moretto, Sandra; Morsch, Andreas; Muccifora, Valeria; Mudnic, Eugen; Muhuri, Sanjib; Muller, Hans; Munhoz, Marcelo; Musa, Luciano; Musso, Alfredo; Nandi, Basanta Kumar; Nania, Rosario; Nappi, Eugenio; Nattrass, Christine; Naumov, Nikolay; Navin, Sparsh; Nayak, Tapan Kumar; Nazarenko, Sergey; Nazarov, Gleb; Nedosekin, Alexander; Nicassio, Maria; Nielsen, Borge Svane; Niida, Takafumi; Nikolaev, Sergey; Nikolic, Vedran; Nikulin, Sergey; Nikulin, Vladimir; Nilsen, Bjorn Steven; Nilsson, Mads Stormo; Noferini, Francesco; Nomokonov, Petr; Nooren, Gerardus; Novitzky, Norbert; Nyanin, Alexandre; Nyatha, Anitha; Nygaard, Casper; Nystrand, Joakim Ingemar; Ochirov, Alexander; Oeschler, Helmut Oskar; Oh, Saehanseul; Oh, Sun Kun; Oleniacz, Janusz; Oppedisano, Chiara; Ortiz Velasquez, Antonio; Ortona, Giacomo; Oskarsson, Anders Nils Erik; Otterlund, Ingvar; Otwinowski, Jacek Tomasz; Oyama, Ken; Pachmayer, Yvonne Chiara; Pachr, Milos; Padilla, Fatima; Pagano, Paola; Paic, Guy; Painke, Florian; Pajares, Carlos; Pal, S; Pal, Susanta Kumar; Palaha, Arvinder Singh; Palmeri, Armando; Papikyan, Vardanush; Pappalardo, Giuseppe; Park, Woo Jin; Passfeld, Annika; Patalakha, Dmitri Ivanovich; Paticchio, Vincenzo; Pavlinov, Alexei; Pawlak, Tomasz Jan; Peitzmann, Thomas; Pereira De Oliveira Filho, Elienos; Peresunko, Dmitri; Perez Lara, Carlos Eugenio; Perez Lezama, Edgar; Perini, Diego; Perrino, Davide; Peryt, Wiktor Stanislaw; Pesci, Alessandro; Peskov, Vladimir; Pestov, Yury; Petracek, Vojtech; Petran, Michal; Petris, Mariana; Petrov, Plamen Rumenov; Petrovici, Mihai; Petta, Catia; Piano, Stefano; Piccotti, Anna; Pikna, Miroslav; Pillot, Philippe; Pinazza, Ombretta; Pinsky, Lawrence; Pitz, Nora; Piuz, Francois; Piyarathna, Danthasinghe; Ploskon, Mateusz Andrzej; Pluta, Jan Marian; Pocheptsov, Timur; Pochybova, Sona; Podesta Lerma, Pedro Luis Manuel; Poghosyan, Martin; Polichtchouk, Boris; Pop, Amalia; Porteboeuf-Houssais, Sarah; Pospisil, Vladimir; Potukuchi, Baba; Prasad, Sidharth Kumar; Preghenella, Roberto; Prino, Francesco; Pruneau, Claude Andre; Pshenichnov, Igor; Puchagin, Sergey; Puddu, Giovanna; Pulvirenti, Alberto; Punin, Valery; Putis, Marian; Putschke, Jorn Henning; Quercigh, Emanuele; Qvigstad, Henrik; Rachevski, Alexandre; Rademakers, Alphonse; Radomski, Sylwester; Raiha, Tomi Samuli; Rak, Jan; Rakotozafindrabe, Andry Malala; Ramello, Luciano; Ramirez Reyes, Abdiel; Raniwala, Rashmi; Raniwala, Sudhir; Rasanen, Sami Sakari; Rascanu, Bogdan Theodor; Rathee, Deepika; Read, Kenneth Francis; Real, Jean-Sebastien; Redlich, Krzysztof; Reichelt, Patrick; Reicher, Martijn; Renfordt, Rainer Arno Ernst; Reolon, Anna Rita; Reshetin, Andrey; Rettig, Felix Vincenz; Revol, Jean-Pierre; Reygers, Klaus Johannes; Riccati, Lodovico; Ricci, Renato Angelo; Richert, Tuva; Richter, Matthias Rudolph; Riedler, Petra; Riegler, Werner; Riggi, Francesco; Rodriguez Cahuantzi, Mario; Roed, Ketil; Rohr, David; Rohrich, Dieter; Romita, Rosa; Ronchetti, Federico; Rosnet, Philippe; Rossegger, Stefan; Rossi, Andrea; Roukoutakis, Filimon; Roy, Christelle Sophie; Roy, Pradip Kumar; Rubio Montero, Antonio Juan; Rui, Rinaldo; Ryabinkin, Evgeny; Rybicki, Andrzej; Sadovsky, Sergey; Safarik, Karel; Sahu, Pradip Kumar; Saini, Jogender; Sakaguchi, Hiroaki; Sakai, Shingo; Sakata, Dosatsu; Salgado, Carlos Albert; Salzwedel, Jai; Sambyal, Sanjeev Singh; Samsonov, Vladimir; Sanchez Castro, Xitzel; Sandor, Ladislav; Sandoval, Andres; Sano, Masato; Sano, Satoshi; Santo, Rainer; Santoro, Romualdo; Sarkamo, Juho Jaako; Scapparone, Eugenio; Scarlassara, Fernando; Scharenberg, Rolf Paul; Schiaua, Claudiu Cornel; Schicker, Rainer Martin; Schmidt, Christian Joachim; Schmidt, Hans Rudolf; Schreiner, Steffen; Schuchmann, Simone; Schukraft, Jurgen; Schutz, Yves Roland; Schwarz, Kilian Eberhard; Schweda, Kai Oliver; Scioli, Gilda; Scomparin, Enrico; Scott, Patrick Aaron; Scott, Rebecca; Segato, Gianfranco; Selioujenkov, Ilya; Senyukov, Serhiy; Seo, Jeewon; Serci, Sergio; Serradilla, Eulogio; Sevcenco, Adrian; Sgura, Irene; Shabetai, Alexandre; Shabratova, Galina; Shahoyan, Ruben; Sharma, Natasha; Sharma, Satish; Shigaki, Kenta; Shimomura, Maya; Shtejer, Katherin; Sibiriak, Yury; Siciliano, Melinda; Sicking, Eva; Siddhanta, Sabyasachi; Siemiarczuk, Teodor; Silvermyr, David Olle Rickard; Simonetti, Giuseppe; Singaraju, Rama Narayana; Singh, Ranbir; Singha, Subhash; Sinha, Bikash; Sinha, Tinku; Sitar, Branislav; Sitta, Mario; Skaali, Bernhard; Skjerdal, Kyrre; Smakal, Radek; Smirnov, Nikolai; Snellings, Raimond; Sogaard, Carsten; Soltz, Ron Ariel; Son, Hyungsuk; Song, Jihye; Song, Myunggeun; Soos, Csaba; Soramel, Francesca; Sputowska, Iwona; Spyropoulou-Stassinaki, Martha; Srivastava, Brijesh Kumar; Stachel, Johanna; Stan, Ionel; Stefanek, Grzegorz; Stefanini, Giorgio; Steinbeck, Timm Morten; Steinpreis, Matthew; Stenlund, Evert Anders; Steyn, Gideon Francois; Stocco, Diego; Stolpovskiy, Mikhail; Strabykin, Kirill; Strmen, Peter; Suaide, Alexandre Alarcon do Passo; Subieta Vasquez, Martin Alfonso; Sugitate, Toru; Suire, Christophe Pierre; Sukhorukov, Mikhail; Sultanov, Rishat; Sumbera, Michal; Susa, Tatjana; Szanto de Toledo, Alejandro; Szarka, Imrich; Szczepankiewicz, Adam; Szostak, Artur Krzysztof; Tagridis, Christos; Takahashi, Jun; Tapia Takaki, Daniel Jesus; Tauro, Arturo; Tejeda Munoz, Guillermo; Telesca, Adriana; Terrevoli, Cristina; Thader, Jochen Mathias; Thomas, Deepa; Thomas, Jim; Tieulent, Raphael Noel; Timmins, Anthony; Tlusty, David; Toia, Alberica; Torii, Hisayuki; Tosello, Flavio; Traczyk, Tomasz; Trzaska, Wladyslaw Henryk; Tsuji, Tomoya; Tumkin, Alexandr; Turrisi, Rosario; Tveter, Trine Spedstad; Ulery, Jason Glyndwr; Ullaland, Kjetil; Ulrich, Jochen; Uras, Antonio; Urban, Jozef; Urciuoli, Guido Marie; Usai, Gianluca; Vajzer, Michal; Vala, Martin; Valencia Palomo, Lizardo; Vallero, Sara; van der Kolk, Naomi; van Leeuwen, Marco; Vande Vyvre, Pierre; Vannucci, Luigi; Vargas, Aurora Diozcora; Varma, Raghava; Vasileiou, Maria; Vasiliev, Andrey; Vechernin, Vladimir; Veldhoen, Misha; Venaruzzo, Massimo; Vercellin, Ermanno; Vergara, Sergio; Vernekohl, Don Constantin; Vernet, Renaud; Verweij, Marta; Vickovic, Linda; Viesti, Giuseppe; Vikhlyantsev, Oleg; Vilakazi, Zabulon; Villalobos Baillie, Orlando; Vinogradov, Alexander; Vinogradov, Leonid; Vinogradov, Yury; Virgili, Tiziano; Viyogi, Yogendra; Vodopianov, Alexander; Voloshin, Kirill; Voloshin, Sergey; Volpe, Giacomo; von Haller, Barthelemy; Vranic, Danilo; Øvrebekk, Gaute; Vrlakova, Janka; Vulpescu, Bogdan; Vyushin, Alexey; Wagner, Boris; Wagner, Vladimir; Wan, Renzhuo; Wang, Dong; Wang, Mengliang; Wang, Yifei; Wang, Yaping; Watanabe, Kengo; Wessels, Johannes; Westerhoff, Uwe; Wiechula, Jens; Wikne, Jon; Wilde, Martin Rudolf; Wilk, Alexander; Wilk, Grzegorz Andrzej; Williams, Crispin; Windelband, Bernd Stefan; Xaplanteris Karampatsos, Leonidas; Yang, Hongyan; Yang, Shiming; Yasnopolsky, Stanislav; Yi, JunGyu; Yin, Zhongbao; Yokoyama, Hiroki; Yoo, In-Kwon; Yoon, Jongik; Yu, Weilin; Yuan, Xianbao; Yushmanov, Igor; Zach, Cenek; Zampolli, Chiara; Zaporozhets, Sergey; Zarochentsev, Andrey; Zavada, Petr; Zaviyalov, Nikolai; Zbroszczyk, Hanna Paulina; Zelnicek, Pierre; Zgura, Sorin Ion; Zhalov, Mikhail; Zhang, Xiaoming; Zhou, Daicui; Zhou, Fengchu; Zhou, You; Zhu, Xiangrong; Zichichi, Antonino; Zimmermann, Alice; Zinovjev, Gennady; Zoccarato, Yannick Denis; Zynovyev, Mykhaylo

    2013-07-16

    The production of muons from heavy flavour decays is measured at forward rapidity in proton--proton collisions at $\\sqrt{s}$ = 7 TeV collected with the ALICE experiment at the LHC. The analysis is carried out on a data sample corresponding to an integrated luminosity $L_{int}$ = 16.5 nb$^{-1}$. The transverse momentum and rapidity differential production cross sections of muons from heavy flavour decays are measured in the rapidity range 2.5 < y < 4, over the transverse momentum range 2 < $p_{t}$ < 12 GeV/c. The results are compared to predictions based on perturbative QCD calculations.

  7. Justification for recommended uncertainties

    International Nuclear Information System (INIS)

    Pronyaev, V.G.; Badikov, S.A.; Carlson, A.D.

    2007-01-01

    The uncertainties obtained in an earlier standards evaluation were considered to be unrealistically low by experts of the US Cross Section Evaluation Working Group (CSEWG). Therefore, the CSEWG Standards Subcommittee replaced the covariance matrices of evaluated uncertainties by expanded percentage errors that were assigned to the data over wide energy groups. There are a number of reasons that might lead to low uncertainties of the evaluated data: Underestimation of the correlations existing between the results of different measurements; The presence of unrecognized systematic uncertainties in the experimental data can lead to biases in the evaluated data as well as to underestimations of the resulting uncertainties; Uncertainties for correlated data cannot only be characterized by percentage uncertainties or variances. Covariances between evaluated value at 0.2 MeV and other points obtained in model (RAC R matrix and PADE2 analytical expansion) and non-model (GMA) fits of the 6 Li(n,t) TEST1 data and the correlation coefficients are presented and covariances between the evaluated value at 0.045 MeV and other points (along the line or column of the matrix) as obtained in EDA and RAC R matrix fits of the data available for reactions that pass through the formation of the 7 Li system are discussed. The GMA fit with the GMA database is shown for comparison. The following diagrams are discussed: Percentage uncertainties of the evaluated cross section for the 6 Li(n,t) reaction and the for the 235 U(n,f) reaction; estimation given by CSEWG experts; GMA result with full GMA database, including experimental data for the 6 Li(n,t), 6 Li(n,n) and 6 Li(n,total) reactions; uncertainties in the GMA combined fit for the standards; EDA and RAC R matrix results, respectively. Uncertainties of absolute and 252 Cf fission spectrum averaged cross section measurements, and deviations between measured and evaluated values for 235 U(n,f) cross-sections in the neutron energy range 1

  8. Evidence-based training as primary prevention of hand eczema in a population of hospital cleaning workers

    DEFF Research Database (Denmark)

    Clemmensen, Kim K B; Randbøll, Ingelise; Ryborg, Malene F.

    2015-01-01

    . OBJECTIVES: The aim of the present study was to investigate exposures related to cleaning and the effect of an evidence-based educational intervention on the prevention of hand eczema among hospital cleaners. PATIENTS/MATERIALS/METHODS: The intervention consisted of a 1 hr course in hand protective behaviour.......8 to 1.8 at follow-up (p = 0.002). CONCLUSIONS: Data indicates a positive effect of a low-cost on-site educational intervention for hospital cleaners....

  9. Application of microturbines to control emissions from associated gas

    Science.gov (United States)

    Schmidt, Darren D.

    2013-04-16

    A system for controlling the emission of associated gas produced from a reservoir. In an embodiment, the system comprises a gas compressor including a gas inlet in fluid communication with an associated gas source and a gas outlet. The gas compressor adjusts the pressure of the associated gas to produce a pressure-regulated associated gas. In addition, the system comprises a gas cleaner including a gas inlet in fluid communication with the outlet of the gas compressor, a fuel gas outlet, and a waste product outlet. The gas cleaner separates at least a portion of the sulfur and the water from the associated gas to produce a fuel gas. Further, the system comprises a gas turbine including a fuel gas inlet in fluid communication with the fuel gas outlet of the gas cleaner and an air inlet. Still further, the system comprises a choke in fluid communication with the air inlet.

  10. Release potential of single-wall carbon nanotubes produced by super-growth method during manufacturing and handling

    International Nuclear Information System (INIS)

    Ogura, Isamu; Sakurai, Hiromu; Mizuno, Kohei; Gamo, Masashi

    2011-01-01

    We investigated the release potential of single-wall carbon nanotubes (CNTs) produced by the super-growth method during their manufacturing and handling processes at a research facility. We generally sampled air at points both outside and inside of protective enclosures such as a glove box and fume hood. Sampling the air outside of the enclosures was intended to evaluate the actual exposure of workers to CNTs, while sampling the air inside the enclosures was performed to quantify the release of CNTs to the air in order to estimate the potential exposure of workers without protection. The results revealed that airborne CNTs were generated when (1) CNTs were separated from the substrates using a spatula and placed in a container in a glove box; (2) an air gun was used to clean the air filters (containing dust that included CNTs) of a vacuum cleaner; (3) a vacuum cleaner was used to collect CNTs (emission with exhaust air from the cleaner); (4) the container of CNTs was opened; and (5) CNTs in the bin of the cleaner were transferred to a container. In these processes, airborne CNTs were only found inside the enclosures, except for a small amount of CNTs released from the glove box when it was opened. Electron microscopic observations of aerosol particles found CNT clusters, which were fragments of CNT forests, with sizes ranging from submicrometers to tens of micrometers.

  11. Implementation of physical coordination training and cognitive behavioural training interventions at cleaning workplaces - secondary analyses of a randomised controlled trial

    DEFF Research Database (Denmark)

    Jørgensen, Marie B; Faber, Anne; Jespersen, Tobias

    2012-01-01

    intervention effects, more research on implementation is needed. Trial registration: ISRCTN96241850. Practitioner summary: Both physical coordination training and cognitive behavioural training are potential effective workplace interventions among low educated job groups with high physical work demands......This study evaluates the implementation of physical coordination training (PCT) and cognitive behavioural training (CBTr) interventions in a randomised controlled trial at nine cleaners' workplaces. Female cleaners (n = 294) were randomised into a PCT, a CBTr or a reference (REF) group. Both 12...

  12. Serotonin blockade delays learning performance in a cooperative fish.

    Science.gov (United States)

    Soares, Marta C; Paula, José R; Bshary, Redouan

    2016-09-01

    Animals use learning and memorizing to gather information that will help them to make ecologically relevant decisions. Neuro-modulatory adjustments enable them to make associations between stimuli and appropriate behavior. A key candidate for the modulation of cooperative behavior is serotonin. Previous research has shown that modulation of the serotonergic system spontaneously affects the behavior of the cleaner wrasse Labroides dimidiatus during interactions with so-called 'client' reef fish. Here, we asked whether shifts in serotonin function affect the cleaners' associative learning abilities when faced with the task to distinguish two artificial clients that differ in their value as a food source. We found that the administration of serotonin 1A receptor antagonist significantly slowed learning speed in comparison with saline treated fish. As reduced serotonergic signaling typically enhances fear, we discuss the possibility that serotonin may affect how cleaners appraise, acquire information and respond to client-derived stimuli via manipulation of the perception of danger.

  13. Ulster Carpets - Cleaner Production option report

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Mercer, David

    A survey on options for saving water and energy was conducted at Ulster Carpets on 14th November 2002 by Henrik Wenzel from the Institute for Product Development in Denmark, and David Mercer from Enviros, South Africa. This report details observations made during this site visit and makes...

  14. Strategy for cleaner production in microbrewery

    International Nuclear Information System (INIS)

    Yang, Y.-G.; Li, W.-M.

    2002-01-01

    'Full text:' There are over 600 breweries in China with nearly the same production processes. Many of them are microbrewery with the capacity of less than 1 million barrels a year. Breweries are characterized by high resource consumption and discharge of large volumes of wastewater, gas emission and solid waste, such as spent grains, coal residue and broken bottles. Long-shi Brewery Inc. is a microbrewery located on the countryside, 200 km east of Beijing, and it is the main sources of pollution in the local community. Wastewater is one of the most important parts of water pollution. In order to reduce pollution and increase economic benefit, several strategies have been taken at the distillery to reduce pollution. For example, some of the cooling water was recycled; coal slag was used to produce bricks or road filling; waste gases were purified before emission; and some of the CO2 produced from fermentation were recycled to produce liquid CO2. More works will be carried out to treat the wastewater from washing operation. After all these strategies, the environmental and economic situation of the company will be greatly improved. (author)

  15. Much cleaner nuclear energy from thorium

    International Nuclear Information System (INIS)

    Damveld, H.

    1998-01-01

    In Zaragoza, Spain, an experimental thorium reactor will be built, which can be an alternative for uranium reactors. A brief impression is given of activities in the Netherlands with respect to the so-called Energy Amplifier (EA), which is a combination of a nuclear power plant and an accelerator. EA is the idea of C. Rubbia of CERN in Geneva, Switzerland

  16. Aviation Fueling: A Cleaner, Greener Approach

    Science.gov (United States)

    Hendricks, Robert C.; Bushnell, Dennis M.; Shouse, Dale T.

    2010-01-01

    Projected growth of aviation depends on fueling where specific needs must be met. Safety is paramount, and along with political, social, environmental and legacy transport systems requirements, alternate aviation fueling becomes an opportunity of enormous proportions. Biofuels sourced from halophytes, algae, cyanobacteria, and weeds using wastelands, waste water, and seawater have the capacity to be drop-in fuel replacements for petroleum fuels. Biojet fuels from such sources solves the aviation CO2 emissions issue and do not compete with food or freshwater needs. They are not detrimental to the social or environmental fabric and use the existing fuels infrastructure. Cost and sustainable supply remains the major impediments to alternate fuels. Halophytes are the near-term solution to biomass/biofuels capacity at reasonable costs; they simply involve more farming, at usual farming costs. Biofuels represent a win-win approach, proffering as they do at least the ones we are studying massive capacity, climate neutral-to-some sequestration, and ultimately, reasonable costs.

  17. Customization creates more efficient, cleaner rigs

    Energy Technology Data Exchange (ETDEWEB)

    Budd, G.

    2002-08-01

    Technological advances in drilling equipment are essential to improving efficiency in the oilpatch; getting the technological upper hand on the competition is no less important for drilling equipment manufacturers than for actors in other sectors of the industry. While off-the-shelf uniformity that reduces unit cost has been the trend in fabricating field gas compression modules, custom manufacturing has become very popular in the rig manufacturing sector. Examples from Crown Energy Technologies and Tesco Corporation, both of Calgary, Aecon Industrial's Edmonton operations, PCL Industrial Construction Ltd of Nisku, and Toromont Process Systems of Houston and Calgary are described to illustrate the widespread demand for customized drilling rigs, including the growing preference for electric drives. Top drive systems, as opposed to rotary drives also have become very popular; six out of ten rigs are sold with electric top drives today compared with fewer than 10 rigs a decade ago. At the same time, Tesco has recently signed a deal with Conoco Inc to construct three revolutionary drilling rigs using Tesco's proprietary Casing Drilling Technology, which uses standard oilfield casing instead of drill pipe, allowing operators to simultaneously drill, case and evaluate oil and gas wells. Aecon and PCL Industrial Construction have had much demand for customized spools and modules particularly from the oil sands industry, while Toromont Process Systems is also expanding its Calgary facilities to meet the demand for its dual gas compression equipment used by power stations for gas compression and co-generation, natural gas refrigeration and specialty gas processing.

  18. Aviation Fueling: A Cleaner, Greener Approach

    Science.gov (United States)

    2011-01-01

    Considered a noxious weed, it produces 5–10 kg-biomass/m2-yr (similar to macroalgae ), a source of pyrolysis fuels with beneficial water treatment International...donax) pro- duce 23–50 ton/acre. It tolerates some salinity and brackish waters and also overwhelms native vegetation. Seaweed, a macroalgae , has...halophytes, algae, cyanobacteria, and “weeds” using wastelands, waste water , and seawater— have the capacity to be drop-in fuel replacements for

  19. Strategy for cleaner production in microbrewery

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Y.-G.; Li, W.-M. [Qinhuangdao Long-shi Brewery Inc. (China)

    2002-06-15

    'Full text:' There are over 600 breweries in China with nearly the same production processes. Many of them are microbrewery with the capacity of less than 1 million barrels a year. Breweries are characterized by high resource consumption and discharge of large volumes of wastewater, gas emission and solid waste, such as spent grains, coal residue and broken bottles. Long-shi Brewery Inc. is a microbrewery located on the countryside, 200 km east of Beijing, and it is the main sources of pollution in the local community. Wastewater is one of the most important parts of water pollution. In order to reduce pollution and increase economic benefit, several strategies have been taken at the distillery to reduce pollution. For example, some of the cooling water was recycled; coal slag was used to produce bricks or road filling; waste gases were purified before emission; and some of the CO2 produced from fermentation were recycled to produce liquid CO2. More works will be carried out to treat the wastewater from washing operation. After all these strategies, the environmental and economic situation of the company will be greatly improved. (author)

  20. Nuclear techniques for a cleaner environment

    International Nuclear Information System (INIS)

    1995-01-01

    Highlights of the major IAEA programme for nuclear techniques and research which have direct contribution towards improvement of the environment are presented. These include topics in the areas of food and agriculture, hydrology, environmental monitoring, and marine sciences. Joint IAEA and FAO programmes in food and agriculture covers topics such as: control of insects and pests, monitoring of pesticides in ecosystem and food irradiation. In hydrology, development and management of water resources, water pollution assessment, cleaning of flue gases and sewage sludge, etc are being undertaken primarily in developing countries. Environmental monitoring is conducted with particular emphasis to when there is an accidental release of radioactivity into the environment, as happened to the Chernobyl accident

  1. Aviation Fueling: A Cleaner, Greener Approach

    OpenAIRE

    Hendricks, Robert C.; Bushnell, Dennis M.; Shouse, Dale T.

    2011-01-01

    Projected growth of aviation depends on fueling where specific needs must be met. Safety is paramount, and along with political, social, environmental, and legacy transport systems requirements, alternate aviation fueling becomes an opportunity of enormous proportions. Biofuels—sourced from halophytes, algae, cyanobacteria, and “weeds” using wastelands, waste water, and seawater—have the capacity to be drop-in fuel replacements for petroleum fuels. Biojet fuels from such sources solve the avi...

  2. Aviation Fueling: A Cleaner, Greener Approach

    Directory of Open Access Journals (Sweden)

    Robert C. Hendricks

    2011-01-01

    Full Text Available Projected growth of aviation depends on fueling where specific needs must be met. Safety is paramount, and along with political, social, environmental, and legacy transport systems requirements, alternate aviation fueling becomes an opportunity of enormous proportions. Biofuels—sourced from halophytes, algae, cyanobacteria, and “weeds” using wastelands, waste water, and seawater—have the capacity to be drop-in fuel replacements for petroleum fuels. Biojet fuels from such sources solve the aviation CO2 emissions issue and do not compete with food or freshwater needs. They are not detrimental to the social or environmental fabric and use the existing fuels infrastructure. Cost and sustainable supply remain the major impediments to alternate fuels. Halophytes are the near-term solution to biomass/biofuels capacity at reasonable costs; they simply involve more farming, at usual farming costs. Biofuels represent a win-win approach, proffering as they do—at least the ones we are studying—massive capacity, climate neutral-to-some sequestration, and ultimately, reasonable costs.

  3. Richer and cleaner - At others' expense?

    International Nuclear Information System (INIS)

    Faehn, Taran; Bruvoll, Annegrete

    2009-01-01

    In rich economies emissions of many pollutants tend to grow at a slower rate than GDP. This could be a result of shifting comparative advantages. If so, net imports of dirty products to these economies will increase and rather than reduced, emissions will be relocated to other countries. In this paper we investigate if decoupling in a rich, open economy coincides with such pollution leakages abroad. Based on historical observations and model projections, we find little evidence to support this hypothesis. Historically, decoupling coincides with falling pollution leakages. Projections over a period of decades indicate a weakening of the decoupling, but that leakages will increase. (author)

  4. The photon and the vacuum cleaner

    International Nuclear Information System (INIS)

    Walmsley, I.A.

    2005-01-01

    Quantum technologies based on optics often rely on photon bunching and measurement with feed forward to achieve an effective nonlinear interaction between otherwise transparent particles. The efficacy of this strategy for implementing nonlinear interactions requires pure state single photon wave packets. These, however, are not so easy to come by. In this talk I will discussed some methods and tools that enable the preparation of such state. (author)

  5. Water driven turbine/brush pipe cleaner

    Science.gov (United States)

    Werlink, Rudy J. (Inventor)

    1995-01-01

    Assemblies are disclosed for cleaning the inside walls of pipes and tubes. A first embodiment includes a small turbine with angled blades axially mounted on one end of a standoff support. An O-ring for stabilizing the assembly within the pipe is mounted in a groove within the outer ring. A replaceable circular brush is fixedly mounted on the opposite end of the standoff support and can be used for cleaning tubes and pipes of various diameters, lengths and configurations. The turbine, standoff support, and brush spin in unison relative to a hub bearing that is fixedly attached to a wire upstream of the assembly. The nonrotating wire is for retaining the assembly in tension and enabling return of the assembly to the pipe entrance. The assembly is initially placed in the pipe or tube to be cleaned. A pressurized water or solution source is provided at a required flow-rate to propel the assembly through the pipe or tube. The upstream water pressure propels and spins the turbine, standoff support and brush. The rotating brush combined with the solution cleans the inside of the pipe. The solution flows out of the other end of the pipe with the brush rotation controlled by the flow-rate. A second embodiment is similar to the first embodiment but instead includes a circular shaped brush with ring backing mounted in the groove of the exterior ring of the turbine, and also reduces the size of the standoff support or eliminates the standoff support.

  6. Search Engine Customization and Data Set Builder

    OpenAIRE

    Arias Moreno, Fco Javier

    2009-01-01

    There are two core objectives in this work: firstly, to build a data set, and secondly, to customize a search engine. The first objective is to design and implement a data set builder. There are two steps required for this. The first step is to build a crawler. The second step is to include a cleaner. The crawler collects Web links. The cleaner extracts the main content and removes noise from the files crawled. The goal of this application is crawling Web news sites to find the...

  7. Ashland outlines $261 million in refinery unit construction

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that Ashland Petroleum Co. has spelled out $261 million in projects completed, under way, or planned to produce cleaner fuel and further reduce emissions at two U.S. refineries. The company: Started up at $13 million pollution control system at its 213,400 b/cd Catlettsburg, Ky., plant. Started construction on six projects at its 67,100 b/cd St. Paul Park, Minn., refinery that will cost about $114 million and enable the plant to produce cleaner burning diesel fuel and further reduce emissions

  8. Economic Injury Level of the Neotropical Brown Stink Bug Euschistus heros (F.) on Cotton Plants.

    Science.gov (United States)

    Soria, M F; Degrande, P E; Panizzi, A R; Toews, M D

    2017-06-01

    In Brazil, the Neotropical brown stink bug, Euschistus heros (F.) (Hemiptera: Pentatomidae), commonly disperses from soybeans to cotton fields. The establishment of an economic treatment threshold for this pest on cotton crops is required. Infestation levels of adults of E. heros were evaluated on cotton plants at preflowering, early flowering, boll filling, and full maturity by assessing external and internal symptoms of injury on bolls, seed cotton/lint production, and fiber quality parameters. A completely randomized experiment was designed to infest cotton plants in a greenhouse with 0, 2, 4, 6, and 8 bugs/plant, except at the full-maturity stage in which only infestation with 8 bugs/plant and uninfested plants were evaluated. Results indicated that the preflowering, early-flowering, and full-maturity stages were not affected by E. heros. A linear regression model showed a significant increase in the number of internal punctures and warts in the boll-filling stage as the population of bugs increased. The average number of loci with mottled immature fibers was significantly higher at 4, 6, and 8 bugs compared with uninfested plants with data following a quadratic regression model. The seed and lint cotton was reduced by 18 and 25% at the maximum level of infestation (ca. 8 bugs/plant) in the boll-filling stage. The micronaire and yellowing indexes were, respectively, reduced and increased with the increase of the infestation levels. The economic injury level of E. heros on cotton plants at the boll-filling stage was determined as 0.5 adult/plant. Based on that, a treatment threshold of 0.1 adult/plant can be recommended to avoid economic losses.

  9. Characterization of biogenic volatile organic compounds (BVOCs) in cleaning reagents and air fresheners in Hong Kong

    Science.gov (United States)

    Huang, Yu; Ho, Steven Sai Hang; Ho, Kin Fai; Lee, Shun Cheng; Gao, Yuan; Cheng, Yan; Chan, C. S.

    2011-11-01

    Biogenic volatile organic compounds (BVOCs) emitted from cleaning products and air fresheners indoors are prone to oxidation resulting in the formation of secondary pollutants that can pose health risks on residents. In this study, a solid phase microextraction (SPME) coupled with gas chromatography/mass spectrometry (SPME-GC/MS) method was applied for the determination of BVOCs compositions in three categories of cleaning products including floor cleaners (FC), kitchen cleaners (KC) and dishwashing detergents (DD), and also air fresheners (AF). The analysis results demonstrated that chemical composition and concentration of individual BVOC varied broadly with household products in the view of their different functions and scents as indicated on the labels. The concentration of total BVOCs for sample FC1 was the highest up to 4146.0 μg g -1, followed by FC2 of 264.6 μg g -1, FC4 of 249.3 μg g -1 and FC3 of 139.2 μg g -1. D-limonene was the most abundant detected BVOCs in KC samples with the chemical composition varying from 19.6 ± 1.0 to 1513.0 ± 37.1 μg g -1. For dishwashing detergents, only D-limonene was detected and quantified. The BVOCs compositions of air freshener samples are much more complicated. It was estimated that the consumption of floor cleaners contributed 51% of the total BVOCs amount indoors in Hong Kong, followed by air fresheners 42%, kitchen cleaners 5% and dishwashing detergents 2%.

  10. Is peracetic acid suitable for the cleaning step of reprocessing flexible endoscopes?

    Science.gov (United States)

    Kampf, Günter; Fliss, Patricia M; Martiny, Heike

    2014-09-16

    The bioburden (blood, protein, pathogens and biofilm) on flexible endoscopes after use is often high and its removal is essential to allow effective disinfection, especially in the case of peracetic acid-based disinfectants, which are easily inactivated by organic material. Cleaning processes using conventional cleaners remove a variable but often sufficient amount of the bioburden. Some formulations based on peracetic acid are recommended by manufacturers for the cleaning step. We performed a systematic literature search and reviewed the available evidence to clarify the suitability of peracetic acid-based formulations for cleaning flexible endoscopes. A total of 243 studies were evaluated. No studies have yet demonstrated that peracetic acid-based cleaners are as effective as conventional cleaners. Some peracetic acid-based formulations have demonstrated some biofilm-cleaning effects and no biofilm-fixation potential, while others have a limited cleaning effect and a clear biofilm-fixation potential. All published data demonstrated a limited blood cleaning effect and a substantial blood and nerve tissue fixation potential of peracetic acid. No evidence-based guidelines on reprocessing flexible endoscopes currently recommend using cleaners containing peracetic acid, but some guidelines clearly recommend not using them because of their fixation potential. Evidence from some outbreaks, especially those involving highly multidrug-resistant gram-negative pathogens, indicated that disinfection using peracetic acid may be insufficient if the preceding cleaning step is not performed adequately. Based on this review we conclude that peracetic acid-based formulations should not be used for cleaning flexible endoscopes.

  11. Single vector-like top partner production in the left-right twin Higgs model at TeV energy eγ colliders

    International Nuclear Information System (INIS)

    Guo Zhanying; Yang Guang; Yang Bingfang

    2013-01-01

    The left-right twin Higgs model contains a new vector-like heavy top quark, which mixes with the SM-like top quark. In this work, we studied the single vector-like top partner production via process e - γ → νeT-barb at the International Linear Collider. We calculated the production cross section at tree level and displayed the relevant differential distributions. The result shows that there will be 125 events produced each year with √s=2 TeV and the integrated luminosity Script Lint ≈ 500 fb -1 , and the b-quark tagging and the relevant missing energy cut will be helpful to detect this new effect. (authors)

  12. Role of Energy Efficiency for Low Carbon Transformation of India

    DEFF Research Database (Denmark)

    Dhar, Subash; Pathak, Minal; Shukla, P.R.

    2018-01-01

    to improving energy security and air quality. EE measures are hence pervasive as they anchor efficient and cleaner technologies in the supply-chain covering production, distribution and consumption. This paper analyses role of EE technologies, policies and measures in India under global carbon emissions......). The results are reported for medium-term (year - 2030) and long-term (year - 2050). The analysis concludes that energy efficiency measures reduce CO2 emissions, promote cleaner production by reducing fossil-based energy and deliver benefits of energy security and improved air quality. The paper finally...

  13. Syntetiske pyrethroider i private hjem

    DEFF Research Database (Denmark)

    Jensen, Karl-Martin Vagn; Fomsgaard, Inge S.; Kilpinen, Ole Østerlund

    2015-01-01

    A number of different methods are tested to elucidate the accumulation of synthetic pyrethroids in private homes. When the target pest is resistant, there is a potential risk that persistent synthetic pyrethroids accumulate because of repeated treatments. The highest residue found was 8260 µg lam...... lambda-cyhalothrin in a vacuum-cleaner sample (vacuumed for 10 minutes) and 1252 µg lambda-cyhalothrin in a “cotton sock dosimeter” sample. Similar data for deltamethrin was 805 µg in a vacuum-cleaner sample and 806 µg in a “cotton sock dosimeter” sample....

  14. Environmental management practices and engineering science: a review and typology for future research.

    Science.gov (United States)

    Evangelinos, Konstantinos I; Allan, Stuart; Jones, Keith; Nikolaou, Ioannis E

    2014-04-01

    Current literature describes a number of environmental management practices and cleaner production methods that facilitate different industrial sectors to address their various environmental impacts. The high number of present practices makes their use especially difficult and complicated. This paper aims to shed light on this field by providing a typology of those environmental management practices (such as environmental management systems, environmental indicators assessment methodologies, and cleaner productions methods) and their limitations. It also describes the strengths and weaknesses of using such tools and thoughts for future research. © 2013 SETAC.

  15. Environmental design of a uranium mill

    International Nuclear Information System (INIS)

    Quan, C.H.; Ring, R.J.; McNaughton, S.J.

    2002-01-01

    In the frame work of the Cleaner Technology Project for Uranium Mining and Milling, Australian Nuclear and Technology Organization (ANSTO), Environment Division of ANSTO has carried out a programme of research which seeks to identify, investigate and develop cleaner technologies that have the potential to minimize the environmental impact of uranium mining and milling. This paper describes three design options of a new uranium mill that can meet environmental, technical and economical objectives. The feasibility of such an approach was examined in the laboratory and in a pilot plant study. (author)

  16. Lean diesel technology and human health: a case study in six Brazilian metropolitan regions.

    Science.gov (United States)

    André, Paulo Afonso de; Veras, Mariana Matera; Miraglia, Simone Georges El Khouri; Saldiva, Paulo Hilário Nascimento

    2012-01-01

    Due to their toxicity, diesel emissions have been submitted to progressively more restrictive regulations in developed countries. However, in Brazil, the implementation of the Cleaner Diesel Technologies policy (Euro IV standards for vehicles produced in 2009 and low-sulfur diesel with 50 ppm of sulfur) was postponed until 2012 without a comprehensive analysis of the effect of this delay on public health parameters. We aimed to evaluate the impact of the delay in implementing the Cleaner Diesel Technologies policy on health indicators and monetary health costs in Brazil. The primary estimator of exposure to air pollution was the concentration of ambient fine particulate matter (particles with aerodynamic diameters policy will result in an estimated excess of 13,984 deaths up to 2040. Health expenditures are projected to be increased by nearly US$ 11.5 billion for the same period. The present results indicate that a significant health burden will occur because of the postponement in implementing the Cleaner Diesel Technologies policy. These results also reinforce the concept that health effects must be considered when revising fuel and emission policies.

  17. Combined lint cleaning system PM10 emission factors and rates for cotton gins

    Science.gov (United States)

    This manuscript is part of a series of manuscripts that characterize cotton gin emissions from the standpoint of stack sampling. The impetus behind this project was the urgent need to collect additional cotton gin emissions data to address current regulatory issues. A key component of this study was...

  18. Cleaning up our act: Alternatives for hazardous solvents used in cleaning

    Energy Technology Data Exchange (ETDEWEB)

    Shoemaker, J.D.; Meltzer, M.; Miscovich, D.; Montoya, D.; Goodrich, P.; Blycker, G.

    1994-01-01

    Lawrence Livermore National Laboratory (LLNL) has studied more than 70 alternative cleaners as potential replacements for chlorofluorocarbons (CFCs), halogenated hydrocarbons (e.g., trichloroethylene and trichloroethane), hydrocarbons (e.g., toluene and Stoddard Solvent), and volatile organic compounds (e.g., acetone, alcohols). This report summarizes LLNL`s findings after testing more than 45 proprietary formulations on bench-scale testing equipment and in more than 60 actual shops and laboratories. Cleaning applications included electronics fabrication, machine shops, optical lenses and hardware, and general cleaning. Most of the alternative cleaners are safer than the solvents previously used and many are nonhazardous, according to regulatory criteria.

  19. A study on environmental pollution caused by radioactive substances and its countermeasure techniques. Part 3. Development on decontamination techniques with high pressure cleaning method

    International Nuclear Information System (INIS)

    Narita, Yasunori; Nozaki, Atsuo; Kakuma, Takayuki; Shinohara, Naohide; Yoshino, Hiroshi

    2012-01-01

    A huge area of Fukushima was contaminated by the radiation released from the nuclear disaster. As a result, decontamination has become an urgent task in densely populated area and developments of an effective decontamination method are desired. So, we carried out the plan of the decontamination methods with a high pressure cleaner in present study. Surface with covered with concrete materials at horizontal plane was washed with high pressure cleaner, consequently, radioactivity was approximately 80% decreased. Further, the wash act with brushing are raised efficiency by 10%. So, the case of washing with surfactant shows no increase efficiency. (author)

  20. A study on improving the performance of steam generator using thermal analysis

    International Nuclear Information System (INIS)

    Li, Zhen Zhe; Heo, Kwang Su; Choi, Jun Hoo; Seol, Seoung Yun

    2008-01-01

    Steam generation mechanism is the key technology of domestic steam cleaner. Not only weight and price of steam cleaner but also the performance of steam generation mechanism must be considered to improve the competitive power of the products. In order to find out the mechanism which can be used to improve the performance of steam generator, the process of steam generation was studied at first. In the following step, possibility of control, safety of mechanism and etc were compared about the two candidated steam generation mechanism. Finally, the merit and drawback of each mechanism were summarized

  1. Cleaning up our act: Alternatives for hazardous solvents used in cleaning

    International Nuclear Information System (INIS)

    Shoemaker, J.D.; Meltzer, M.; Miscovich, D.; Montoya, D.; Goodrich, P.; Blycker, G.

    1994-01-01

    Lawrence Livermore National Laboratory (LLNL) has studied more than 70 alternative cleaners as potential replacements for chlorofluorocarbons (CFCs), halogenated hydrocarbons (e.g., trichloroethylene and trichloroethane), hydrocarbons (e.g., toluene and Stoddard Solvent), and volatile organic compounds (e.g., acetone, alcohols). This report summarizes LLNL's findings after testing more than 45 proprietary formulations on bench-scale testing equipment and in more than 60 actual shops and laboratories. Cleaning applications included electronics fabrication, machine shops, optical lenses and hardware, and general cleaning. Most of the alternative cleaners are safer than the solvents previously used and many are nonhazardous, according to regulatory criteria

  2. A study relating to the conceptual design and cost estimates of the Saskatchewan Power Corporation lignite beneficiation process

    Energy Technology Data Exchange (ETDEWEB)

    Granatstein, D L; Champagne, P J; Szladow, A J

    1982-06-01

    The purpose is to provide technology for upgrading lignite to a cleaner fuel that is capable of improving utility plant operation and is more acceptable to the non-utility sector. Beneficiated lignite can provide a middle alternative between low-grade and high-grade fuels. The results for phase IV include a conceptual design for a lignite beneficiation plant and a marketing study for the product. The beneficiated lignite is cheaper to transport, easier to handle, cleaner, allows better plant operation with higher availability, reduced slagging and fouling, reduced sulphur, and lower operating and maintenance costs. 8 refs., 6 figs., 7 tabs.

  3. Performance of cotton leaf curl virus resistant intrahirsutum f/sub 1/ hybrids

    International Nuclear Information System (INIS)

    Baloch, M.J.

    2004-01-01

    The first and foremost effort to combat the devastating cotton leaf curl virus (clcv) disease would be to utilize those clcv resistant germplasm in a hybridization programme which can enhance the possibilities of selecting desirable progenies from segregating populations. In this connection, 16 clcv intrahirsutum F1 hybrids were developed and evaluated for their performance. The hybrids, on an average gave an increase of 26.02 % in seed cotton yield; 11.52 % in bolls per plant; 14.23 % in boll weight; 4.28 % in lint; 3.89 % in fibre length and 8.21 % in earliness against the average of parents. However, among the hybrids, the top three scoring for yield were, BH.121 x Cyto.9/91, Cyto.9/91 x CRIS-226 and VH-137 x CRIS-226. The number of bolls per plant was found to be a major contributing factor for increased yield because the hybrids which set higher bolls correspondingly gave higher yields. Boll weight was not regarded as an important attribute to increase yield because hybrids with moderate boll sizes were among the top three high yielders. For lint %, the hybrids CRIS-129 x LRA-5166 and FH-901 x VH-137 were first for fibre length, whereas CRIS-121 x Cyto.51 and BH-124 x CIM-448 were among the top two rankers. Regarding earliness, the hybrids CRIS-121 x Cyto. 51 gave the highest boll opening percent and next in order was the hybrid VH-137 x DNH-49. Our results thus generally suggest that although the best three hybrids were desirable for other traits, the choice of the hybrids may be made on the priority for characters to be bred. (author)

  4. Cotton harvest at 40% versus 75% boll-splitting on yield and economic return under standard and proactive boll weevil (Coleoptera: Curculionidae) spray regimes.

    Science.gov (United States)

    Showler, A T; Robinson, J R C

    2008-10-01

    The standard practice of two or three preemptive insecticide applications at the start of pinhead (1-2-mm-diameter) squaring followed by threshold-triggered (when 10% of randomly selected squares have oviposition punctures) insecticide applications for boll weevil, Anthonomus grandis grandis Boheman (Coleoptera: Curculionidae), control does not provide reliable protection of cotton, Gossypium hirsutum L., lint production. This study, conducted during 2004 and 2005, showed that three to six fewer spray applications in a "proactive" approach, in which spraying began at the start of large (5.5-8-mm-diameter) square formation and continued at approximately 7-d intervals while large squares were abundant, resulted in fewer infested squares and 1.4- to 1.7-fold more lint than the standard treatment. Fewer sprays and increased yield made proactive spraying significantly more profitable than the standard approach, which resulted in relatively low or negative economic returns. Harvest at 75% boll-split in the proactive spray regime of 2005 resulted in four-fold greater economic return than cotton harvested at 40% boll-split because of improved protection of large squares and the elimination of late-season sprays inherent to standard spray regime despite the cost of an extra irrigation in the 75% boll-split treatments. The earlier, 40% harvest trigger does not avoid high late-season boll weevil pressure, which exerts less impact on bolls, the predominant form of fruiting body at that time, than on squares. Proactive spraying and harvest timing are based on an important relationship between nutrition, boll weevil reproduction, and economic inputs; therefore, the tactic of combining proaction with harvest at 75% boll-split is applicable where boll weevils are problematic regardless of climate or region, or whether an eradication program is ongoing.

  5. Response of Cotton to Irrigation Methods and Nitrogen Fertilization: Yield Components, Water-Use Efficiency, Nitrogen Uptake, and Recovery

    International Nuclear Information System (INIS)

    Janat, M.

    2009-01-01

    Efficient crop use of nitrogen (N) fertilizer is critical from economic and environmental viewpoints, especially under irrigated conditions. Cotton yield parameters, fiber quality, water- and N-use efficiency responses to N, and irrigation methods in northern Syria were evaluated. Field trials were conducted for two growing seasons on a Chromoxerertic Rhodoxeralf soil. Treatments consisted of drip fertigation, furrow irrigation, and five different rates of N fertilizer (50, 100, 150, 200, and 250 kg N /ha). Cotton was irrigated when soil moisture in the specified active root depth was 80% of the field capacity as indicated by the neutron probe. Seed cotton yield was higher than the national average (3,928 kg/ha) by at least 12% as compared to all treatments. Lint properties were not negatively affected by the irrigation method or N rates. Water savings under drip fertigation ranged between 25 and 50% of irrigation water relative to furrow irrigation. Crop water-use efficiencies of the drip-fertigated treatments were in most cases 100% higher than those of the corresponding furrow-irrigated treatments. The highest water demand was during the fruit-setting growth stage. It was also concluded that under drip fertigation, 100 -150 N kg/ha was adequate and comparable with the highest N rates tested under furrow irrigation regarding lint yield, N uptake, and recovery. Based on cotton seed yield and weight of stems, the overall amount of N removed from the field for the drip-fertigated treatments ranged between 101-118 kg and 116-188 N/ha for 2001 and 2002, respectively. The N removal ranged between 94-113 and 111-144 kg N/ha for the furrow-irrigated treatments for 2001 and 2002, respectively. (author)

  6. Development of inspection techniques for quantitatively measuring surface contamination on SRM hardware

    Science.gov (United States)

    Law, R. D.

    1989-01-01

    A contaminant is any material or substance which is potentially undesirable or which may adversely affect any part, component, or assembly. Contamination control of SRM hardware surfaces is a serious concern, for both Thiokol and NASA, with particular concern for contaminants which may adversely affect bonding surfaces. The purpose of this study is to develop laboratory analytical techniques which will make it possible to certify the cleanliness of any designated surface, with special focus on particulates (dust, dirt, lint, etc.), oils (hydrocarbons, silicones, plasticizers, etc.), and greases (HD-2, fluorocarbon grease, etc.). The hardware surfaces of concern will include D6AC steel, aluminum alloys, anodized aluminum alloys, glass/phenolic, carbon/phenolic, NBR/asbestos-silica, and EPDM rubber.

  7. A new evaluation of the neutron data standards

    Directory of Open Access Journals (Sweden)

    Carlson A.D.

    2017-01-01

    Full Text Available Evaluations are being done for the H(n,n, 6Li(n,t, 10B(n,αγ, 10B(n,α, C(n,n, Au(n,γ, 235U(n,f and 238U(n,f standard cross sections. Evaluations are also being done for data that are not traditional standards including: the Au(n,γ cross section at energies below where it is considered a standard; reference cross sections for prompt gamma-ray production in fast neutron-induced reactions; reference cross sections for very high energy fission cross sections; the 235U thermal neutron fission spectrum and the 252Cf spontaneous fission neutron spectrum and the thermal constants.

  8. How to improve the irradiation conditions for the International Fusion Materials Irradiation Facility

    CERN Document Server

    Daum, E

    2000-01-01

    The accelerator-based intense D-Li neutron source International Fusion Materials Irradiation Facility (IFMIF) provides very suitable irradiation conditions for fusion materials development with the attractive option of accelerated irradiations. Investigations show that a neutron moderator made of tungsten and placed in the IFMIF test cell can further improve the irradiation conditions. The moderator softens the IFMIF neutron spectrum by enhancing the fraction of low energy neutrons. For displacement damage, the ratio of point defects to cascades is more DEMO relevant and for tritium production in Li-based breeding ceramic materials it leads to a preferred production via the sup 6 Li(n,t) sup 4 He channel as it occurs in a DEMO breeding blanket.

  9. Cleaner combustion developing detailed chemical kinetic models

    CERN Document Server

    Battin-Leclerc, Frédérique; Simmie, John M

    2013-01-01

    This book describes the reactive chemistry of minor pollutants within extensively validated detailed mechanisms for traditional fuels, and also for innovative surrogates, describing the complex chemistry of new, environmentally important bio-fuels.

  10. Teaching Professionals Environmental Management and Cleaner Technology

    DEFF Research Database (Denmark)

    Jørgensen, Ulrik; Jørgensen, Michael Søgaard; Thorsen, Nils

    -ters. The target groups are professional environmental managers working in businesses including consultants, governmental institutions and organizations. To get access to the education the students must have a technical/nature science competence at master level or bachelor level combined with relevant job...... experience. Generally participants have had 5-15 years of practical experience and are in the position of a internal or external job change towards new tasks that require new knowledge, methodologies or management/co-ordination skills. The education of "Masters of Environmental Management" (MEM) started...

  11. IMCO: Making the seas safer and cleaner

    International Nuclear Information System (INIS)

    1979-01-01

    Since 1959, when the IMCO Assembly met for the first time, the Organization has had two main objectives: the introduction of measures designed to improve safety at sea and to prevent pollution of the sea from ships. But during its twenty-year history IMCO has also adopted a number of Conventions and other measures which are aimed specifically at tankers and the problem of pollution. The 1954 Oil Pollution Convention (for which IMCO became depositary in 1959) was the first major attempt by the maritime nations to curb the impact of oil pollution, but since then the problem has become even more serious today The amount of oil carried by sea has risen by 700 per cent in 20 years - to around 1,700 million tons. The world tanker fleet has increased from 37 million deadweight tons in 1954 to around 340 million deadweight tons today, and the size of the tankers themselves has also grown amazingly. The second Convention deals with liability of the ship or cargo owner for damage suffered as a result of an oil pollution casualty. The Convention is intended to ensure that adequate compensation is available to victims and places the liability for the damage on the shipowner. As a result, another Conference was convened by IMCO in 1971 which resulted in the adoption of a Convention establishing the International Fund for Compensation for Oil Pollution Damage The Convention came into force in 1978 and the Fund has now been established with its headquarters in London These three Conventions all deal with what one might call the legal aspects of oil pollution. But the continuing boom in the transportation of oil showed that more work needed to be done on the technical side as well: the scale of oil pollution was so great in some areas that there was serious concern for the marine environment, not only as a result of accidents but through normal tanker operations, notably the cleaning of cargo tanks. In 1973 a major conference was called to discuss the whole problem of marine pollution from ships and resulted in the adoption of the most ambitious anti-pollution Convention ever adopted. The Marine Pollution Convention dealt not only with oil but other forms of pollution, including that from garbage, sewage, chemicals and other harmful substances

  12. Union Spinning Mills - Cleaner Production option report

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Schneider, Zsig

    operations in the dyehouse, and water and energy balances were made to the extent data allowed. A number of options for saving water, energy and chemicals were identified. The potentials monetary savings and necessary investments were estimated, and a list of priority projects including milestone plans...

  13. Berg River Textiles - Cleaner Production Option Report

    DEFF Research Database (Denmark)

    Wenzel, Henrik; Schneider, Zsig

    schematics on the various wet treatment operations in the dyehouse, and water and energy balances were made to the extent data allowed. A number of options for saving water, energy and chemicals were identified. The potentials monetary savings and necessary investments were estimated, and a list of priority...... projects including milestone plans for their implementation was made. A saving potential of around 3 mill. R was identified with a pay-back period of around 0.2 years as average of the identified options. The company implemented a large number of the options right away....

  14. Guide to Air Cleaners in the Home

    Science.gov (United States)

    ... as electrostatic precipitators use a process called electrostatic attraction to trap charged particles. They draw air through ... of ozone with indoor chemicals such as those coming from household cleaning products, air fresheners, certain paints, ...

  15. Different Pathways for Achieving Cleaner Urban Areas

    DEFF Research Database (Denmark)

    Schippl, J.; Gudmundsson, Henrik; Sørensen, Claus Hedegaard

    2016-01-01

    The 2011 White Paper on Transport of the European Commission spells out a series of targets for 2030 and 2050. One of the 10 targets is explicitly related to urban transport and stipulates: ''Halve the use of 'conventionally fuelled' cars in urban transport by 2030; phase them out in cities by 2050....... Achieve essentially CO2-free city logistics in major urban centres by 2030.'' With this paper we present and discuss a roadmap that deals with the question who needs to do what by when in order to reach the White Paper goal for urban transport. The ''stakeholder-driven'' roadmap was developed in the FP7...... project TRANSFORuM. The paper will present the key findings and the suggested action steps identified in the roadmap. The paper will also exemplify three possible urban transformation pathways towards the urban target. This approach emerged from stakeholder consultations which highlighted the need to take...

  16. Cleaner Air in Sity Landscape / Ljuba Gornaja

    Index Scriptorium Estoniae

    Gornaja, Ljuba

    1998-01-01

    1997.a. lõpul toimunud konverentsist "Transport ja keskkond Tallinnas" ئ perspektiivid ja areng. Tabelid: 1. Sõidukite arv Eestis 1981-1997, 2. Transpordi-dünaamika Tallinnas 1990-1996, 3. Ühistranspordi hinnad Tallinnas 1. jaan. 1998. 4. Mootorikütuse tariifid Eestis 1993-1999

  17. Resource efficiency and cleaner production:Measurable advantages

    CSIR Research Space (South Africa)

    Raphulu, N

    2015-10-01

    Full Text Available RECP can be defined as a systematic and integrated approach to managing energy, water, environmental and financial resources as well as eliminating or minimising waste and emissions to the environment on a sustainable and cost-effective basis...

  18. Toward cleaner, quieter skies: An international debate

    Energy Technology Data Exchange (ETDEWEB)

    Aylesworth, H. Jr.

    1997-12-31

    The paper summarizes infrastructure and technology changes in the aerospace industry aimed at reducing fuel consumption and nitrous oxide emissions. Growth of total air traffic is predicted over the next 20 years; however, emissions are predicted to grow less rapidly due to increased fuel efficiency and operational productivity. Engine technology leading to fuel efficiency, reduced emissions, and noise reduction is described. Regulations pertinent to these issues are outlined, and international efforts in these areas are also briefly described. 4 figs.

  19. The Costs of a Cleaner baltic Sea

    DEFF Research Database (Denmark)

    Brodersen, Sisse Liv; Konrad, Maria Theresia Hedegaard; Hasler, Berit

    2009-01-01

    In 2007 the Helcom (The Helsinki Comity), representing most of the countries around the Baltic, made an agreement for the future of the Baltic Sea, on reducing the nutrient input to the Baltic Sea and thereby avert further environmental damage, called the Baltic Sea Action Plan (BSAP). One...... of the results was nutrient reduction targets for each country - the BSAP targets. Because the Baltic Sea is such an international marine area, receiving pollutants from many  countries, an international approach is necessary to make effective solutions. But is the BSAP the most cost-effective solution...... to the regulation of the Baltic Sea? And does the BSAP result in cost-effective reductions in the different countries, which is a requirement of the Water Framework Directive and the Marine Strategy Directive?   These questions are studied and answered using a cost minimisation model for the Baltic sea, initially...

  20. Richer and cleaner - At others' expense?

    Energy Technology Data Exchange (ETDEWEB)

    Faehn, Taran; Bruvoll, Annegrete [Statistics Norway, Research Department, PB. 8131 Dep 0033, Oslo (Norway)

    2009-05-15

    In rich economies emissions of many pollutants tend to grow at a slower rate than GDP. This could be a result of shifting comparative advantages. If so, net imports of dirty products to these economies will increase and rather than reduced, emissions will be relocated to other countries. In this paper we investigate if decoupling in a rich, open economy coincides with such pollution leakages abroad. Based on historical observations and model projections, we find little evidence to support this hypothesis. Historically, decoupling coincides with falling pollution leakages. Projections over a period of decades indicate a weakening of the decoupling, but that leakages will increase. (author)

  1. Industrial water demand management and cleaner production ...

    African Journals Online (AJOL)

    Processes and systems using water today are being subjected to increasingly stringent environmental regulations on effluents and there is growing demand for fresh water. In Morocco, consumption of water by industries is estimated in 1994 at 1 billion m3, the drinking water constitutes 4%. Water used in the food and drink ...

  2. Cleaning interactions by gobies on a tropical eastern Pacific coral reef.

    Science.gov (United States)

    Quimbayo, J P; Zapata, F A

    2018-04-01

    The present study describes the cleaning interactions among species of cleaner gobies Tigrigobius spp. and Elacatinus puncticulatus (family Gobiidae) and the client fish species they clean in a coral reef of Gorgona Island, Colombia. In 419 cleaning events, we observed 27 species acting as clients of Tigrigobius spp., whereas only nine were clients of E. puncticulatus. Paranthias colonus and Cephalopholis panamensis were the species most commonly cleaned by Tigrigobius spp., while Ophioblennius steindachneri and Stegastes acalpulcoensis were the clients most commonly cleaned by E. puncticulatus. The abundance (but not the body size) of clients was an important variable predicting the cleaning frequency observed for clients of Tigrigobius spp., but this was not the case for clients of E. puncticulatus. Additionally, Tigrigobius spp. preferred cleaning planktivores, sessile invertebrate feeders and territorial herbivores (Ivlev's index >0·15), whereas E. puncticulatus did not exhibit any preference. We observed two major peaks of cleaning activity for Tigrigobius spp., one in the early morning and another one in the late afternoon. These results suggest that Tigrigobius spp. is a specialized cleaner goby, whereas E. puncticulatus is a facultative cleaner that cleans sporadically. © 2018 The Fisheries Society of the British Isles.

  3. Automated cleaning and pre-processing of immunoglobulin gene sequences from high-throughput sequencing

    Directory of Open Access Journals (Sweden)

    Miri eMichaeli

    2012-12-01

    Full Text Available High throughput sequencing (HTS yields tens of thousands to millions of sequences that require a large amount of pre-processing work to clean various artifacts. Such cleaning cannot be performed manually. Existing programs are not suitable for immunoglobulin (Ig genes, which are variable and often highly mutated. This paper describes Ig-HTS-Cleaner (Ig High Throughput Sequencing Cleaner, a program containing a simple cleaning procedure that successfully deals with pre-processing of Ig sequences derived from HTS, and Ig-Indel-Identifier (Ig Insertion – Deletion Identifier, a program for identifying legitimate and artifact insertions and/or deletions (indels. Our programs were designed for analyzing Ig gene sequences obtained by 454 sequencing, but they are applicable to all types of sequences and sequencing platforms. Ig-HTS-Cleaner and Ig-Indel-Identifier have been implemented in Java and saved as executable JAR files, supported on Linux and MS Windows. No special requirements are needed in order to run the programs, except for correctly constructing the input files as explained in the text. The programs' performance has been tested and validated on real and simulated data sets.

  4. Occupational exposures associated with work-related asthma and work-related wheezing among U.S. workers.

    Science.gov (United States)

    Arif, Ahmed A; Delclos, George L; Whitehead, Lawrence W; Tortolero, Susan R; Lee, Eun S

    2003-10-01

    National estimates of occupational asthma (OA) in the United States are sparse. Using data from the Third National Health and Nutrition Examination Survey (NHANES III) 1988-1994, we analyzed associations between occupation and work-related asthma and work-related wheezing among U.S. workers. This study identified several occupations that were at risk of developing work-related asthma and/or wheezing, with cleaners and equipment cleaners showing the highest risks. Other major occupations identified were farm and agriculture; entertainment; protective services; construction; mechanics and repairers; textile; fabricators and assemblers; other transportation and material moving occupations; freight, stock, and material movers; and motor vehicle operators. The population attributable risks for work-related asthma and work-related wheezing were 26% and 27%, respectively. This study adds evidence to the literature that identifies work-related asthma as an important public health problem. Several occupations are targeted for additional evaluation and study. Of particular interest are cleaners, which are being increasingly reported as a risk group for asthma. Future intervention strategies need to be developed for effective control and prevention of asthma in the workplace. Copyright 2003 Wiley-Liss, Inc.

  5. Acute effect on ambulatory blood pressure from aerobic exercise

    DEFF Research Database (Denmark)

    Lund Rasmussen, Charlotte; Nielsen, Line; Linander Henriksen, Marie

    2018-01-01

    session among female cleaners. METHODS: Twenty-two female cleaners were randomised to a cross-over study with a reference and an aerobic exercise session. Differences in 24-h, work hours, leisure time, and sleep ambulatory blood pressure (ABP) were evaluated using repeated measure 2 × 2 mixed...... of 1.5 mmHg (p = 0.03) were found after the aerobic exercise session. During leisure time, the systolic ABP was lowered by 1.7 mmHg (p = 0.04) and the diastolic ABP was unaltered. During sleep, the systolic and diastolic ABP was unaltered. CONCLUSION: A single aerobic exercise session lowered 24-h...

  6. Laboratory measurements of the influence of air treatment devices on radon daughters

    International Nuclear Information System (INIS)

    Rajala, M.; Janka, K.; Graeffe, G.; Kulmala, V.; Lehtimaeki, M.

    1984-01-01

    This paper presents laboratory measurements in which the effect of air cleaners on radon decay products has been studied. Experiments show that both a high-efficiency particulate air filter and an electrostatic precipitator substantially decrease the total airborne radon daughter concentration leading to a situation where most of the decay products are unattached. However, in some situations the concentration of fine particles generated by the corona discharge in the electronic air cleaner becomes high enough to increase the total radon daughter concentration and decrease the free decay product concentration. Impurities in the air may have a notable role in the formation of these condensation nuclei. (Author)

  7. Gas. The Energy of Possibility

    International Nuclear Information System (INIS)

    2017-01-01

    GRTgaz launches a campaign to introduce the general public to all the gas energy industry's advanced solutions for the future of energy. Gas takes on new forms through innovative and ambitious solutions that offer concrete applications in territories: producing biomethane from agricultural, industrial or domestic waste, transforming excess renewable electricity into storable renewable gas, using gas and biomethane for cleaner land transport and, in liquid form, cleaner sea transport. In support of this energy source, France can rely on its discreet and robust gas infrastructure to promote the growing dynamic and offer a response to major challenges, such as air quality, waste management and renewable energy storage

  8. Change and innovation: the evolving industry

    International Nuclear Information System (INIS)

    Lay, K.L.

    1999-01-01

    The rapidly increasing demand for energy is creating significant opportunities for energy companies world wide but only those companies equipped to take early advantage of the new markets will profit. Some of the recent technological advances such as telephones, washing machines, air conditioning and the Internet are mentioned. Success will be largely judged by a company's ability to maximise technology and make life easier and more productive. The paper discusses competition in global markets, environmental concerns, how consumers are benefiting, and cleaner energy. It is suggested that with the right vision and innovation, man can achieve a cleaner and more cost-effective world. (uk)

  9. Solvent Handbook Database System user's manual

    International Nuclear Information System (INIS)

    1993-03-01

    Industrial solvents and cleaners are used in maintenance facilities to remove wax, grease, oil, carbon, machining fluids, solder fluxes, mold release, and various other contaminants from parts, and to prepare the surface of various metals. However, because of growing environmental and worker-safety concerns, government regulations have already excluded the use of some chemicals and have restricted the use of halogenated hydrocarbons because they affect the ozone layer and may cause cancer. The Solvent Handbook Database System lets you view information on solvents and cleaners, including test results on cleaning performance, air emissions, recycling and recovery, corrosion, and non-metals compatibility. Company and product safety information is also available

  10. Advance Planning, Programming and Production Control as key Activities Now the Environmental Education

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2015-06-01

    Full Text Available This work addresses the evolution of Planning, Programming and Control of Production (PPCP as essential activities of the company towards the insertion of environmental education. The approach is based on an exploratory research and a critical bibliographic revision. Two main objectives were established: i a new way of production organization, by considering cleaner production from company utilities to production capacity, technology and outsourcing and ii infrastructure changes related to market attendance and environmental education dissemination. Needs that arise can be grouped as follows: utilities adequacy, cleaner technologies and ecochains implementation; instruction and dissemination of environmental education; and necessity of the adoption of new paradigms.

  11. The U.S. Oil and Gas Boom

    International Nuclear Information System (INIS)

    Brodman, John

    2012-01-01

    A funny thing happened in the last few years when no one was paying attention. What is going on is nothing short of a revolution in U.S., Lower-48 oil and natural gas production that is quickly transforming the energy sector. This transformation, while important for the oil market, is likely to be spectacularly more evolutionary in natural gas markets, both here and abroad. New production technologies have arrived at a time when the whole world is looking for cleaner-burning fuels, and they may usher in a new golden era for natural gas as a bridge fuel to a cleaner, more-sustainable energy future

  12. 78 FR 40635 - Delegation of Authority to the Southern Ute Indian Tribe To Implement and Enforce National...

    Science.gov (United States)

    2013-07-08

    ..., Beverages, Carbon monoxide, Cement industry, Chemicals, Coal, Copper, Dry cleaners, Electric power plants... paper products industry, Particulate matter, Paving and roofing materials, Petroleum, Phosphate...

  13. Lean diesel technology and human health: a case study in six Brazilian metropolitan regions

    Directory of Open Access Journals (Sweden)

    Paulo Afonso de André

    2012-01-01

    Full Text Available OBJECTIVE: Due to their toxicity, diesel emissions have been submitted to progressively more restrictive regulations in developed countries. However, in Brazil, the implementation of the Cleaner Diesel Technologies policy (Euro IV standards for vehicles produced in 2009 and low-sulfur diesel with 50 ppm of sulfur was postponed until 2012 without a comprehensive analysis of the effect of this delay on public health parameters. We aimed to evaluate the impact of the delay in implementing the Cleaner Diesel Technologies policy on health indicators and monetary health costs in Brazil. METHODS: The primary estimator of exposure to air pollution was the concentration of ambient fine particulate matter (particles with aerodynamic diameters <2.5 μm, [PM2.5]. This parameter was measured daily in six Brazilian metropolitan areas during 2007-2008. We calculated 1 the projected reduction in the PM2.5 that would have been achieved if the Euro IV standards had been implemented in 2009 and 2 the expected reduction after implementation in 2012. The difference between these two time curves was transformed into health outcomes using previous dose-response curves. The economic valuation was performed based on the DALY (disability-adjusted life years method. RESULTS: The delay in implementing the Cleaner Diesel Technologies policy will result in an estimated excess of 13,984 deaths up to 2040. Health expenditures are projected to be increased by nearly US$ 11.5 billion for the same period. CONCLUSIONS: The present results indicate that a significant health burden will occur because of the postponement in implementing the Cleaner Diesel Technologies policy. These results also reinforce the concept that health effects must be considered when revising fuel and emission policies.

  14. Flame retardant exposure: polybrominated diphenyl ethers in blood from Swedish workers.

    Science.gov (United States)

    Sjödin, A; Hagmar, L; Klasson-Wehler, E; Kronholm-Diab, K; Jakobsson, E; Bergman, A

    1999-08-01

    Polybrominated diphenyl ethers (PBDEs) are used as additives in polymers and textiles to prohibit the development of fires. Because of the production and use of PBDEs, their lipophilic characteristics, and persistence, these compounds have become ubiquitous environmental contaminants. The aim of the present study was to determine potential exposures of PBDEs to clerks working full-time at computer screens and personnel at an electronics-dismantling plant, with hospital cleaners as a control group. Five PBDE congeners--2,2',4,4'-tetraBDE; 2,2',4,4',5,5'-hexaBDE; 2,2',4,4',5, 6'-hexaBDE; 2,2',3,4,4',5',6-heptaBDE; and decaBDE--were quantified in blood serum from all three categories of workers. Subjects working at the dismantling plant showed significantly higher levels of all PBDE congeners in their serum as compared to the control group. Decabromodiphenyl ether is present in concentrations of 5 pmol/g lipid weight (lw) in the personnel dismantling electronics; these concentrations are comparable to the concentrations of 2,2',4, 4'-tetraBDE. The latter compound was the dominating PBDE congener in the clerks and cleaners. The major compound in personnel at the dismantling plant was 2,2',3,4,4',5',6-heptaBDE. Concentrations of this PBDE congener are almost twice as high as for 2,2',4, 4'-tetraBDE in these workers and seventy times the level of this heptaBDE in cleaners. The total median PBDE concentrations in the serum from workers at the electronics-dismantling plant, clerks, and cleaners were 37, 7.3, and 5.4 pmol/g lw, respectively. The results show that decabromodiphenyl ether is bioavailable and that occupational exposure to PBDEs occurs at the electronics-dismantling plant.

  15. Proinflammatory effects of cookstove emissions on human bronchial epithelial cells.

    Science.gov (United States)

    Hawley, B; Volckens, J

    2013-02-01

    Approximately half of the world's population uses biomass fuel for indoor cooking and heating. This form of combustion typically occurs in open fires or primitive stoves. Human exposure to emissions from indoor biomass combustion is a global health concern, causing an estimated 1.5 million premature deaths each year. Many 'improved' stoves have been developed to address this concern; however, studies that examine exposure-response with cleaner-burning, more efficient stoves are few. The objective of this research was to evaluate the effects of traditional and cleaner-burning stove emissions on an established model of the bronchial epithelium. We exposed well-differentiated, normal human bronchial epithelial cells to emissions from a single biomass combustion event using either a traditional three-stone fire or one of two energy-efficient stoves. Air-liquid interface cultures were exposed using a novel, aerosol-to-cell deposition system. Cellular expression of a panel of three pro-inflammatory markers was evaluated at 1 and 24 h following exposure. Cells exposed to emissions from the cleaner-burning stoves generated significantly fewer amounts of pro-inflammatory markers than cells exposed to emissions from a traditional three-stone fire. Particulate matter emissions from each cookstove were substantially different, with the three-stone fire producing the largest concentrations of particles (by both number and mass). This study supports emerging evidence that more efficient cookstoves have the potential to reduce respiratory inflammation in settings where solid fuel combustion is used to meet basic domestic needs. Emissions from more efficient, cleaner-burning cookstoves produced less inflammation in well-differentiated bronchial lung cells. The results support evidence that more efficient cookstoves can reduce the health burden associated with exposure to indoor pollution from the combustion of biomass. © 2012 John Wiley & Sons A/S.

  16. Whole linted cottonseed meal (Gossypium hirsutum L. protein and fiber degradability in the rumen

    Directory of Open Access Journals (Sweden)

    Deborah Clea Ruy

    1996-12-01

    3 x 3 change-over design to evaluate the following treatments: A = 0% WLC; B = 6.6% WLC; and C = 15.0% WLC. Sorghum silage contributed with 70% in all three treatments. DM degradability at 48h incubation time was statistically different (p < 0.05 (A = 54.4%; B = 54.2% and C = 58.7%, as well as PB degradability at 12h (A = 40.3%; B = 47.7% and C = 53.1% and ADF degradability at 48h (A = 40.3%; B = 41.2% and C = 45.6%. Ruminal volume, turn overtime and ruminal pH weren’t affected by the experimental diets. Substitution of WLC for cottonseed meal up to 15% diet increased degradability of DM, CP and ADF of WLC.

  17. Hosted Services for Advanced V and V Technologies: An Approach to Achieving Adoption without the Woes of Usage

    Science.gov (United States)

    Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.; OMalley, Owen; Brew, William A.

    2003-01-01

    Attempts to achieve widespread use of software verification tools have been notably unsuccessful. Even 'straightforward', classic, and potentially effective verification tools such as lint-like tools face limits on their acceptance. These limits are imposed by the expertise required applying the tools and interpreting the results, the high false positive rate of many verification tools, and the need to integrate the tools into development environments. The barriers are even greater for more complex advanced technologies such as model checking. Web-hosted services for advanced verification technologies may mitigate these problems by centralizing tool expertise. The possible benefits of this approach include eliminating the need for software developer expertise in tool application and results filtering, and improving integration with other development tools.

  18. Stability analysis for yield and some other traits in egyptian cotton genotypes across varying environments

    International Nuclear Information System (INIS)

    Shaheen, A.M.A.; Gomaa, M.A.M.; Khattab, S.A.M.

    1999-01-01

    Data obtained from eight genotypes of cotton grown over two successive seasons each included three nitrogen levels i.e. 45, 60 and 75kg nitrogen/feddan were statistically analysed using stability model. Ten quantitative traits were studied to indicate the performance of genotypes, comprised seed cotton yiel/plant, number of bolls/plant, average boll weight, lint percentage, fiber length (2.5%SL), fiber length (50%SL), uniformity ratio, micronair value, fiber strength and oil percentage. stability parameters (b) and (S 2 d) were used to compare the performance of these ge notypes over environment. Genotypes were ranked according to significance of their stability parameters for studied characters. The best genotype according to stability was the genotype 3/28/1 and the worst one was Giza 81

  19. Percent Forest Cover (Future)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Forests provide economic and ecological value. High percentages of forest cover (FORPCTFuture) generally indicate healthier ecosystems and cleaner surface water....

  20. Pirinc

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that widespread development of alternative motor fuels in the U.S. is unnecessary, the John H. Lichtblau, president of the Petroleum Industry Research Foundation Inc. (Pirinc), New York, In a talk before an Organization of Petroleum Exporting Countries environmental seminar in Vienna, Lichtblau the U.S. environmental policy appears destined to reduce oil demand to less than it would have been otherwise. The Pirinc executive the, The big question for the oil industry is whether the aim of this policy is to make oil and oil consuming equipment environmentally cleaner and more efficient or whether the policy represents a transition toward a permanent move away from oil to other, supposedly cleaner energy sources