Development of a New RF Finger concept for vacuum beam line interconnections

CERN Document Server

Garion, C; Rambeau, H

2012-01-01

RF contact fingers are primarily used as a transition element to absorb the thermal expansion of vacuum chambers during bake-out and also to compensate for mechanical tolerances. They have to carry the beam image current to avoid the generation of Higher Order Modes and to reduce beam impedances. They are usually made out of copper beryllium thin sheets and are therefore very fragile and critical components. In this paper, a robust design based on a deformable finger concept is proposed. It allows the compensation of large longitudinal movements and also defaults such as transverse offset, twist or bending. The concept of this new RF fingers is first explained, then the design of the component is presented. The mechanical study based on a highly non-linear Finite Element model is shown as well as preliminary tests, including fatigue assessment, carried out on prototypes.

Development of a hydrological model for simulation of runoff from catchments unbounded by ridge lines

Science.gov (United States)

Vema, Vamsikrishna; Sudheer, K. P.; Chaubey, I.

2017-08-01

Watershed hydrological models are effective tools for simulating the hydrological processes in the watershed. Although there are a plethora of hydrological models, none of them can be directly applied to make water conservation decisions in irregularly bounded areas that do not confirm to topographically defined ridge lines. This study proposes a novel hydrological model that can be directly applied to any catchment, with or without ridge line boundaries. The model is based on the water balance concept, and a linear function concept to approximate the cross-boundary flow from upstream areas to the administrative catchment under consideration. The developed model is tested in 2 watersheds - Riesel Experimental Watershed and a sub-basin of Cedar Creek Watershed in Texas, USA. Hypothetical administrative catchments that did not confirm to the location of ridge lines were considered for verifying the efficacy of the model for hydrologic simulations. The linear function concept used to account the cross boundary flow was based on the hypothesis that the flow coming from outside the boundary to administrative area was proportional to the flow generated in the boundary grid cell. The model performance was satisfactory with an NSE and r2 of ≥0.80 and a PBIAS of administrative catchments of the watersheds were in good agreement with the observed hydrographs, indicating a satisfactory performance of the model in the administratively bounded areas.

Development of a Meiosis Concept Inventory

Science.gov (United States)

Kalas, Pamela; O'Neill, Angie; Pollock, Carol; Birol, Gulnur

2013-01-01

We have designed, developed, and validated a 17-question Meiosis Concept Inventory (Meiosis CI) to diagnose student misconceptions on meiosis, which is a fundamental concept in genetics. We targeted large introductory biology and genetics courses and used published methodology for question development, which included the validation of questions by…

Developing Boiler Concepts as Integrated Units

DEFF Research Database (Denmark)

Sørensen, Kim; Condra, Thomas Joseph; Houbak, Niels

2004-01-01

- consisting of pressure part, burner and control system. The Technical University of Denmark, MEK - Energy Engineering Section [12] has participated in the modelling process. The project has included static and dynamic modelling of the boiler concept. For optimization of operation, verication of performance......With the objective to be able to optimize the design and operation of steam boiler concepts Aalborg Industries A/S [1] has together with Aalborg University, Institute of Energy Technology [9] carried out a development project paying special attention to the boiler concept as an integrated unit......, emissions and to obtain long time operation experiences with the boiler concept, a full scale prototype has been built and these tests have been accomplished on the prototype. By applying this integrated unit approach to the boiler concept development it has been possible to optimize the different building...

Line-mode browser development days

CERN Multimedia

Anna Pantelia

2013-01-01

Twelve talented web developers have travelled to CERN from all over the world to recreate a piece of web history: the line-mode browser. See the line-mode browser simulator that they created here. Read more about the birth of the web here.

Concept analysis and the building blocks of theory: misconceptions regarding theory development.

Science.gov (United States)

Bergdahl, Elisabeth; Berterö, Carina M

2016-10-01

The purpose of this article is to discuss the attempts to justify concepts analysis as a way to construct theory - a notion often advocated in nursing. The notion that concepts are the building blocks or threads from which theory is constructed is often repeated. It can be found in many articles and well-known textbooks. However, this notion is seldom explained or defended. The notion of concepts as building blocks has also been questioned by several authors. However, most of these authors seem to agree to some degree that concepts are essential components from which theory is built. Discussion paper. Literature was reviewed to synthesize and debate current knowledge. Our point is that theory is not built by concepts analysis or clarification and we will show that this notion has its basis in some serious misunderstandings. We argue that concept analysis is not a part of sound scientific method and should be abandoned. The current methods of concept analysis in nursing have no foundation in philosophy of science or in language philosophy. The type of concept analysis performed in nursing is not a way to 'construct' theory. Rather, theories are formed by creative endeavour to propose a solution to a scientific and/or practical problem. The bottom line is that the current style and form of concept analysis in nursing should be abandoned in favour of methods in line with modern theory of science. © 2016 John Wiley & Sons Ltd.

The Rise and Fall of the Concept of The Experience Economy in the Local Economic Development of Denmark

DEFF Research Database (Denmark)

Freire-Gibb, L. Carlos

2011-01-01

, nor to tourist attractions, which are also linked to TEE. However, it criticizes the implementation of an unorthodox idea to Local Economic Development, even though it may have useful principles to other disciplines. This article reflects the line of recent research which has questioned its......This article discusses the evolution of the concept of “The Experience Economy“ (TEE) in the Danish local economic policy. The term is rarely known worldwide; however, it has become quite popular among the Danes and other Scandinavians. Its origin comes from the American business-marketing field...... in the late 1990s, while in Denmark, it evolved as a multifaceted idea with notable effects for economic development at the local level. The concept is related to the cultural or creative economy, but in the Danish case, it became more diffuse. This article does not intend to be a critique of these two lines...

Developing Sustainable Life Support System Concepts

Science.gov (United States)

Thomas, Evan A.

2010-01-01

Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

Concept for Specific Lines of Business, Energy Saving Tourism

International Nuclear Information System (INIS)

Jilek, W.

1998-01-01

In the spirit of the objectives of the Energy Plan 1995 in order to make more efficient use of energy and thus to reduce energy requirements, to promote the use of renewable energies, and to attach maximum importance to the ecological compatibility of the energy systems, among other project the provincial government of Styria is pursuing the option of consulting small and medium-sized enterprises in a target manner. Three years after being launched, this Ecological Company Consulting scheme for various lines of business is now producing successful results, demonstrating that energy saving, business profit and ecology can go hand in hand by example of numerous pilot projects. Trade-specific concepts have been elaborated for foodstuffs, carpenters and car repair and sales firms, bakeries and hairdressers and, most recently, for tourist industry business /hotels, bars, restaurants, etc.). The province of Styria, represented by the Energy Commissioner and the department of waste management, is co-operating closely in the Ecological Company Consulting scheme with the Styrian Chamber of Commerce and the Economy Promotion Institute (Wirtschaftsfoerderungsinstitut). In several cases, other provinces, the Federal Ministry of Environmental, Youth and Family Affairs, and the Federal Chamber of Commerce have adopted the results of this co-operation, while in some cases subsidy schemes are linked to these trade-specific concepts. In the course of the scheme, the aim is to investigate energy requirements, saving potentials and questions of waste management. (author)

Theoretical Atomic Physics code development IV: LINES, A code for computing atomic line spectra

International Nuclear Information System (INIS)

Abdallah, J. Jr.; Clark, R.E.H.

1988-12-01

A new computer program, LINES, has been developed for simulating atomic line emission and absorption spectra using the accurate fine structure energy levels and transition strengths calculated by the (CATS) Cowan Atomic Structure code. Population distributions for the ion stages are obtained in LINES by using the Local Thermodynamic Equilibrium (LTE) model. LINES is also useful for displaying the pertinent atomic data generated by CATS. This report describes the use of LINES. Both CATS and LINES are part of the Theoretical Atomic PhysicS (TAPS) code development effort at Los Alamos. 11 refs., 9 figs., 1 tab

Trends and developments in magnetic confinement fusion reactor concepts

International Nuclear Information System (INIS)

Baker, C.C.; Carlson, G.A.; Krakowski, R.A.

1981-01-01

An overview is presented of recent design trends and developments in reactor concepts for magnetic confinement fusion. The paper emphasizes the engineering and technology considerations of commercial fusion reactor concepts. Emphasis is placed on reactors that operate on the deuterium/tritium/lithium fuel cycle. Recent developments in tokamak, mirror, and Elmo Bumpy Torus reactor concepts are described, as well as a survey of recent developments on a wide variety of alternate magnetic fusion reactor concepts. The paper emphasizes recent developments of these concepts within the last two to three years

Development concept plan

International Nuclear Information System (INIS)

1992-06-01

The following management objectives for New River Gorge National River relate to the Kaymoor site to: Preserve coal mining, railroad, and other historic resources that best illustrate park significance; Develop a system of land- and water-based recreation opportunities that allow visitors to experience the park's resources to the extent that natural, cultural, and scenic values are not imparied; and Work with the community to the extent possible to help it maximize economic benefits related to park development without impairing key resources. The Development Concept Plant outlining a plan of development for Kaymoor is a part of a larger emphasis by the National Park Service to identify and develop significant coal-related historic and cultural resources in southern West Virginia in cooperation with the West Virginia State Historic Preservation Office

From Perceptual Categories to Concepts: What Develops?

Science.gov (United States)

Sloutsky, Vladimir M.

2010-01-01

People are remarkably smart: they use language, possess complex motor skills, make non-trivial inferences, develop and use scientific theories, make laws, and adapt to complex dynamic environments. Much of this knowledge requires concepts and this paper focuses on how people acquire concepts. It is argued that conceptual development progresses from simple perceptual grouping to highly abstract scientific concepts. This proposal of conceptual development has four parts. First, it is argued that categories in the world have different structure. Second, there might be different learning systems (sub-served by different brain mechanisms) that evolved to learn categories of differing structures. Third, these systems exhibit differential maturational course, which affects how categories of different structures are learned in the course of development. And finally, an interaction of these components may result in the developmental transition from perceptual groupings to more abstract concepts. This paper reviews a large body of empirical evidence supporting this proposal. PMID:21116483

Instant standard concept for data standards development

NARCIS (Netherlands)

Folmer, Erwin Johan Albert; Kulcsor, Istvan Zsolt; Roes, Jasper

2013-01-01

This paper presents the current results of an ongoing research about a new data standards development concept. The concept is called Instant Standard referring to the pressure that is generated by shrinking the length of the standardization process. Based on this concept it is estimated that the

Building Integrated Design Practice under the Concept of Sustainable Development

Science.gov (United States)

Liu, Xuexin

2018-03-01

With the continuous development of social economy, people are more demanding for architecture. Some advanced design concepts are gradually applied to the design of buildings. Under the concept of sustainable development, building integration design has also been widely used to promote the rapid development of architectural design. Integrated design concepts and sustainable development concepts play an important role to meet people’s requirements. This article will explore the concept of sustainable development under the concept of integrated architectural design and practice analysis, propose appropriate measures.

Relativity Concept Inventory: Development, Analysis, and Results

Science.gov (United States)

Aslanides, J. S.; Savage, C. M.

2013-01-01

We report on a concept inventory for special relativity: the development process, data analysis methods, and results from an introductory relativity class. The Relativity Concept Inventory tests understanding of relativistic concepts. An unusual feature is confidence testing for each question. This can provide additional information; for example,…

Development of a Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Duncan, D.; S, C. A. T.

2009-01-01

Concept inventories can provide useful insight into students’ understanding of key physical concepts. Knowing what your students have learned during a course is a valuable tool for improving your own teaching. Unfortunately, current astronomy concept inventories are not suitable for an introductory solar system course because they either cover too broad of a range of topics (e.g. Astronomy Diagnostic Test) or are too narrowly focused (e.g. Greenhouse Effect Concept Inventory, Lunar Phase Concept Inventory). We have developed the Solar System Concept Inventory (SSCI) to cover those topics commonly taught in an introductory solar system course. The topics included on the SSCI were selected by having faculty identify the key concepts they address when teaching about the solar system. SSCI topics include formation mechanisms, planetary interiors, atmospheric effects, and small solar system bodies. Student interviews were conducted to identify common naive ideas and reasoning difficulties relating to these key topics. Preliminary development of the SSCI was completed at the University of Colorado and involved over 400 students. A larger, national, multi-institutional field test is planned for Spring 2009 as a Collaboration of Astronomy Teaching Scholars (CATS) research project. We present here the results from the preliminary development and proposed changes for the next stage of research. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

Flight Test Evaluation of an Unmanned Aircraft System Traffic Management (UTM) Concept for Multiple Beyond-Visual-Line-of-Sight (BVLOS) Operations

Science.gov (United States)

Johnson, Marcus; Jung, Jaewoo; Rios, Joseph; Mercer, Joey; Homola, Jeffrey; Prevot, Thomas; Mulfinger, Daniel; Kopardekar, Parimal

2017-01-01

Many applications of small Unmanned Aircraft System (UAS) have been envisioned. These include surveillance of key assets such as pipelines, rail, or electric wires, deliveries, search and rescue, traffic monitoring, videography, and precision agriculture. These operations are likely to occur in the same airspace in the presence of many static and dynamic constraints such as airports, and high wind areas. Therefore, operations of small UAS need to be managed to ensure safety and operation efficiency is maintained. NASA has advanced a concept for UAS Traffic Management (UTM) and has initiated a research effort to refine that concept and develop operational and system requirements. A UTM research platform is in development and flight test activities to evaluate core functions and key assumptions focusing exclusively on UAS operations in different environments are underway. This seminar will present lessons learned from a recent flight test focused on enabling operations of multiple UAS in lower-risk environments within and beyond visual line of sight (BVLOS).

New economical concept of maritime terminal for LNG; Nouveau concept de terminal maritime a cout reduit pour le GNL

Energy Technology Data Exchange (ETDEWEB)

Dupont, B. [EURODIM S.A. (France)

2000-07-01

This series of slides present a new concept of marine terminal for LNG tanker-ships that requires less investments and offers a better adaptability to loading/unloading sites with a bad accessibility. This concept uses flexible cryogenic flow-lines developed by Coflexip Stena Offshore, double-envelope submarine pipes with a reinforced thermal insulation and the multi-purpose cryogenic connection module developed by Eurodim S.A. (J.S.)

Number-concept acquisition and general vocabulary development.

Science.gov (United States)

Negen, James; Sarnecka, Barbara W

2012-11-01

How is number-concept acquisition related to overall language development? Experiments 1 and 2 measured number-word knowledge and general vocabulary in a total of 59 children, ages 30-60 months. A strong correlation was found between number-word knowledge and vocabulary, independent of the child's age, contrary to previous results (D. Ansari et al., 2003). This result calls into question arguments that (a) the number-concept creation process is scaffolded mainly by visuo-spatial development and (b) that language only becomes integrated after the concepts are created (D. Ansari et al., 2003). Instead, this may suggest that having a larger nominal vocabulary helps children learn number words. Experiment 3 shows that the differences with previous results are likely due to changes in how the data were analyzed. © 2012 The Authors. Child Development © 2012 Society for Research in Child Development, Inc.

Developing the MAPLE materials test reactor concept

International Nuclear Information System (INIS)

Lee, A.G.; Lidstone, R.F.; Donnelly, J.V.

1992-05-01

MAPLE-MTR is a new multipurpose research facility being planned by AECL Research as a possible replacement for the 35-year-old NRU reactor. In developing the MAPLE-MTR concept, AECL is starting from the recent design and licensing experience with the MAPLE-X10 reactor. By starting from technology developed to support the MAPLE-X10 design and adapting it to produce a concept that satisfies the requirements of fuel channel materials testing and fuel irradiation programs, AECL expects to minimize the need for major advances in nuclear technology (e.g., fuel, heat transfer). Formulation of the MAPLE-MTR concept is at an early stage. This report describes the irradiation requirements of the research areas, how these needs are translated into design criteria for the project and elements of the preliminary design concept

Concept Maps for Evaluating Learning of Sustainable Development

Science.gov (United States)

Shallcross, David C.

2016-01-01

Concept maps are used to assess student and cohort learning of sustainable development. The concept maps of 732 first-year engineering students were individually analyzed to detect patterns of learning and areas that were not well understood. Students were given 20 minutes each to prepare a concept map of at least 20 concepts using paper and pen.…

The proof-of-concept experiment for the spiral line induction accelerator

Energy Technology Data Exchange (ETDEWEB)

Putnam, S D; Bailey, V L; Smith, J; Lidestri, J; Thomas, H; Lackner, H; Nishimoto, H [Pulse Sciences, Inc., San Leandro, CA (United States)

1997-12-31

A proof-of-concept experiment (POCE) for the Spiral Line Induction Accelerator (SLIA) is underway at Pulse Sciences, Inc. to demonstrate a new compact high current ({>=} few kiloamperes) recirculating induction accelerator for high power ({>=} 100 kW) commercial processing and other applications. Hardware has been fabricated to generate 9.5 MeV electron beams at 2 and 10 kA by recirculating the beam for two passes through each of two 1.5 MeV accelerating units. Initial experiments have demonstrated acceleration of 2 and 10 kA beams to 5.5 MeV by transport around a complete turn with two passes through a single accelerating unit and work is currently in progress to complete the full POCE. Experimental results to date are reported. (author). 5 figs., 14 refs.

Suspending group debate and developing concepts

NARCIS (Netherlands)

Stam, D.; de Vet, A.; Barkema, H.G.; de Dreu, C.K.W.

2013-01-01

The ability of new product development (NPD) teams to generate ideas and develop high-quality concepts for new products is a crucial determinant of NPD success. Although prior research in this area has developed various interventions to enhance the ability of teams to generate ideas, such

Development and Validation of the Homeostasis Concept Inventory

Science.gov (United States)

McFarland, Jenny L.; Price, Rebecca M.; Wenderoth, Mary Pat; Martinková, Patrícia; Cliff, William; Michael, Joel; Modell, Harold; Wright, Ann

2017-01-01

We present the Homeostasis Concept Inventory (HCI), a 20-item multiple-choice instrument that assesses how well undergraduates understand this critical physiological concept. We used an iterative process to develop a set of questions based on elements in the Homeostasis Concept Framework. This process involved faculty experts and undergraduate…

Development of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, S.; Prather, E.

2009-12-01

Concept inventories can provide useful insight into students’ understanding of key physical concepts. Knowing what your students have learned during a course is a valuable tool for improving your own teaching. Unfortunately, current astronomy concept inventories are not suitable for an introductory solar system course because they either cover too broad of a range of topics (e.g. Astronomy Diagnostic Test) or are too narrowly focused (e.g. Greenhouse Effect Concept Inventory, Lunar Phase Concept Inventory). We have developed the Solar System Concept Inventory (SSCI) to cover those topics commonly taught in an introductory solar system course. The topics included on the SSCI were selected by having faculty identify the key concepts they address when teaching about the solar system. SSCI topics include formation mechanisms, planetary interiors, atmospheric effects, and small solar system bodies. Student interviews were conducted to identify common naive ideas and reasoning difficulties relating to these key topics. The SSCI has been through two semesters of national, multi-institutional field-testing, involving over 1500 students. After the first semester of testing, question statistics were used to flag ineffective questions and flagged questions were revised or eliminated. We will present an overall outline of the SSCI development as well as our question-flagging criteria and question analyses from the latest round of field-testing. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

A multi-channel bioluminescent bacterial biosensor for the on-line detection of metals and toxicity. Part II: technical development and proof of concept of the biosensor

Energy Technology Data Exchange (ETDEWEB)

Charrier, Thomas; Thouand, Gerald [UMR CNRS 6144 GEPEA, CBAC, Nantes University, PRES UNAM, Campus de la Courtaisiere-IUT, La Roche-sur-Yon cedex (France); Chapeau, Cyrille [Biolumine, Biokar Diagnostic, Rue des Quarante Mines ZAC de Ther-Allonne, Beauvais Cedex (France); Bendria, Loubna; Daniel, Philippe [UMR CNRS 6087 LPEC, Universite du Maine, Av Olivier Messiaen, Le Mans cedex 9 (France); Picart, Pascal [UMR CNRS 6613 IAM-LAUM, Ecole Nationale des Ingenieurs du Mans, Universite du Maine, Le Mans Cedex 9 (France)

2011-05-15

This research study deals with the on-line detection of heavy metals and toxicity within the context of environmental pollution monitoring. It describes the construction and the proof of concept of a multi-channel bioluminescent bacterial biosensor in immobilized phase: Lumisens3. This new versatile device, designed for the non-stop analysis of water pollution, enables the insertion of any bioluminescent strains (inducible or constitutive), immobilized in a multi-well removable card. The technical design of Lumisens3 has benefited from both a classical and a robust approach and includes four main parts: (1) a dedicated removable card contains 64 wells, 3 mm in depth, arranged in eight grooves within which bacteria are immobilized, (2) this card is incubated on a Pelletier block with a CCD cooled camera on top for bioluminescence monitoring, (3) a fluidic network feeds the card with the sample to be analyzed and finally (4) a dedicated computer interface, BIOLUX 1.0, controls all the elements of the biosensor, allowing it to operate autonomously. The proof of concept of this biosensor was performed using a set of four bioluminescent bacteria (Escherichia coli DH1 pBzntlux, pBarslux, pBcoplux, and E. coli XL1 pBfiluxCDABE) in the on-line detection of CdCl{sub 2} 0.5 {mu}M and As{sub 2}O{sub 3} 5 {mu}M from an influent. When considering metals individually, the ''fingerprints'' from the biosensor were as expected. However, when metals were mixed together, cross reaction and synergistic effects were detected. This biosensor allowed us to demonstrate the simultaneous on-line cross detection of one or several heavy metals as well as the measurement of the overall toxicity of the sample. (orig.)

Supporting Development of Satellite's Guidance Navigation and Control Software: A Product Line Approach

Science.gov (United States)

McComas, David; Stark, Michael; Leake, Stephen; White, Michael; Morisio, Maurizio; Travassos, Guilherme H.; Powers, Edward I. (Technical Monitor)

2000-01-01

The NASA Goddard Space Flight Center Flight Software Branch (FSB) is developing a Guidance, Navigation, and Control (GNC) Flight Software (FSW) product line. The demand for increasingly more complex flight software in less time while maintaining the same level of quality has motivated us to look for better FSW development strategies. The GNC FSW product line has been planned to address the core GNC FSW functionality very similar on many recent low/near Earth missions in the last ten years. Unfortunately these missions have not accomplished significant drops in development cost since a systematic approach towards reuse has not been adopted. In addition, new demands are continually being placed upon the FSW which means the FSB must become more adept at providing GNC FSW functionality's core so it can accommodate additional requirements. These domain features together with engineering concepts are influencing the specification, description and evaluation of FSW product line. Domain engineering is the foundation for emerging product line software development approaches. A product line is 'A family of products designed to take advantage of their common aspects and predicted variabilities'. In our product line approach, domain engineering includes the engineering activities needed to produce reusable artifacts for a domain. Application engineering refers to developing an application in the domain starting from reusable artifacts. The focus of this paper is regarding the software process, lessons learned and on how the GNC FSW product line manages variability. Existing domain engineering approaches do not enforce any specific notation for domain analysis or commonality and variability analysis. Usually, natural language text is the preferred tool. The advantage is the flexibility and adapt ability of natural language. However, one has to be ready to accept also its well-known drawbacks, such as ambiguity, inconsistency, and contradictions. While most domain analysis

Park system concept for environmental sustainabilityin urban spatial development

Science.gov (United States)

Uniaty, Q.

2018-01-01

Urban Park System is an integrated concept between nature system and urban life. The problems caused by urban population activity resulted in the need to increase the balance between two systems. Establishment of urban park system is a response to the need for resilience of urban space structures. As an ideal requirement it needs to be built integration between the ecological, social, economic, aesthetic aspects of urban landscape architecture. The methodology was developed based on an approach to issues affecting the conditions due to urban issues and its relation to the development efforts of urban park system; Observation of Jakarta problem was obtained based on published studies and data, literature, characteristic and potential analyzes, local physical, from limited field observations. Both are simple methods aimed to describe the nature of a condition as well as form characteristics of problems in controlling the development of region, to examine the causes and symptoms. This method try to assess an object study compared between the conditions before and after. The benefits of urban park system development will not only improve the urban environment, but the value of urban pride, identity and control urban growth in line with efforts to improve the balance between conservation and development. Integrated urban park system will enhance the multifunctional role, connectivity, habitability, durability, identity and investment.

Development of a Handheld Line Information Reader and Generator for Efficient Management of Optical Communication Lines.

Science.gov (United States)

Lee, Jaeyul; Kwon, Hyungwoo; Song, Jaewon; Jeon, Mansik; Kim, Jeehyun

2017-08-24

A handheld line information reader and a line information generator were developed for the efficient management of optical communication lines. The line information reader consists of a photo diode, trans-impedance amplifier, voltage amplifier, microcontroller unit, display panel, and communication modules. The line information generator consists of a laser diode, laser driving circuits, microcontroller unit, and communication modules. The line information reader can detect the optical radiation field of the test line by bending the optical fiber. To enhance the sensitivity of the line information reader, an additional lens was used with a focal length of 4.51 mm. Moreover, the simulation results obtained through BeamPROP ® software from Synopsys, Inc. demonstrated a stronger optical radiation field of the fiber due to a longer transmission wavelength and larger bending angle of the fiber. Therefore, the developed devices can be considered as useful tools for the efficient management of optical communication lines.

Development of Elite BPH-Resistant Wide-Spectrum Restorer Lines for Three and Two Line Hybrid Rice.

Science.gov (United States)

Fan, Fengfeng; Li, Nengwu; Chen, Yunping; Liu, Xingdan; Sun, Heng; Wang, Jie; He, Guangcun; Zhu, Yingguo; Li, Shaoqing

2017-01-01

Hybrid rice has contributed significantly to the world food security. Breeding of elite high-yield, strong-resistant broad-spectrum restorer line is an important strategy for hybrid rice in commercial breeding programs. Here, we developed three elite brown planthopper (BPH)-resistant wide-spectrum restorer lines by pyramiding big-panicle gene Gn8.1 , BPH-resistant genes Bph6 and Bph9 , fertility restorer genes Rf3, Rf4, Rf5 , and Rf6 through molecular marker assisted selection. Resistance analysis revealed that the newly developed restorer lines showed stronger BPH-resistance than any of the single-gene donor parent Luoyang-6 and Luoyang-9. Moreover, the three new restorer lines had broad spectrum recovery capabilities for Honglian CMS, Wild abortive CMS and two-line GMS sterile lines, and higher grain yields than that of the recurrent parent 9,311 under nature field conditions. Importantly, the hybrid crosses also showed good performance for grain yield and BPH-resistance. Thus, the development of elite BPH-resistant wide-spectrum restorer lines has a promising future for breeding of broad spectrum BPH-resistant high-yield varieties.

Integrated concept development of next-step helical-axis advanced stellarators

Energy Technology Data Exchange (ETDEWEB)

Warmer, Felix

2016-04-13

With the increasing energy demand of mankind and the transformation of our society towards sustainability, nuclear fusion by magnetic confinement is a promising option for the sustainable electricity supply in the future. In view of these prospects this thesis focuses on the concept development of next-step helical-axis advanced stellarator (HELIAS) burning-plasma devices. The HELIAS-line is the continued development of the prototype optimised stellarator Wendelstein 7-X which started operation in 2015. For the integrated concept development of such devices, the approach taken in this work encompasses detailed physics and engineering considerations while also including economic aspects. Starting with physics considerations, the properties of plasma transport and confinement of 3D stellarator configurations are discussed due to their critical importance for the device design. It becomes clear that current empirical confinement time scalings are not sufficient to predict the confinement in future stellarator devices. Therefore, detailed 1D transport simulations are carried out to reduce the uncertainties regarding confinement. Beyond the well-validated neoclassical approach, first attempts are made to include results from state-of-the-art turbulence simulations into the 1D transport simulations to further enhance the predictive capabilities. Next, for the systematic development of consistent design points, stellarator-specific models are developed and implemented in the well-established European systems code PROCESS. This allows a consistent description of an entire HELIAS fusion power plant including physics, engineering, and economic considerations. With the confidence obtained from a verification study, systems studies are for the first time applied for a HELIAS power-plant which shows that the available design window is constrained by the beta-limit. Furthermore, an economic comparison of an exemplary design point to an ''equivalent'' tokamak

Relativity concept inventory: Development, analysis, and results

Directory of Open Access Journals (Sweden)

J. S. Aslanides

2013-05-01

Full Text Available We report on a concept inventory for special relativity: the development process, data analysis methods, and results from an introductory relativity class. The Relativity Concept Inventory tests understanding of relativistic concepts. An unusual feature is confidence testing for each question. This can provide additional information; for example, high confidence correlated with incorrect answers suggests a misconception. A novel aspect of our data analysis is the use of Monte Carlo simulations to determine the significance of correlations. This approach is particularly useful for small sample sizes, such as ours. Our results show a gender bias that was not present in course assessment, similar to that reported for the Force Concept Inventory.

The Concept of Extraordinary Crime in Indonesia Legal System: is The Concept An Effective Criminal Policy?

Directory of Open Access Journals (Sweden)

Vidya Prahassacitta

2016-10-01

Full Text Available The concept of extraordinary crime was a common concept in Indonesia. Adopts from the concept of the most serious crime in Rome Statute and adjusted with the Indonesian legal system. Then it developed wider and introduced into terrorism, corruption, drug abuse offenses, and child sexual abuse in legislations and Constitutional Court verdicts. The implementation of this concept generated some consequences in drafting and formulating the legislation as part of penal policy. This leads to two legal problems; first, what was the categorization of the concept of extraordinary crime? and second, what were the consequences of the concept extraordinary crime in accordance with penal policy?. Normative law research with literature study method, This was a conducted as the response of both legal problems. Using secondary data from legislation, Constitutional Court verdicts, book and journal, this research concludes that; the concept of extraordinary crime parts of criminal policy does not have any standard for the categorization. Then, as consequences of the implementation of the concept of extraordinary crime in several penal efforts are formulating in legislations. The penalty effort is not limited to criminalization and sentencing aspects but wider and shall be in line with the strategy of crime eradication and welfare protection purposes. To reach the effectiveness of the criminal policy of the concept of extraordinary crime, the penalty effort shall be in line with criminal law principles and human right basic principles.

PRSEUS Structural Concept Development

Science.gov (United States)

Velicki, Alex; Jegley, Dawn

2014-01-01

A lighter, more robust airframe is one of the key technological advancements necessary for the successful launch of any large next-generation transport aircraft. Such a premise dictates that considerable improvements beyond current state-of-the-art aluminum structures is needed, and that improvements of this magnitude will require an extensive use of composite materials that are not only lightweight, but also economical to produce. To address this challenge, researchers at NASA and The Boeing Company are developing a novel structural concept called the Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) under the Environmentally Responsible Aviation (ERA) Project. It is an integrally stiffened panel concept that is stitched together and designed to maintain residual load-carrying capabilities under a variety of damage scenarios. In addition to improved structural performance, an important facet of this unique arrangement of stitched carbon fibers is its innovative manufacturing method that has the potential to lower fabrication costs by eliminating fasteners and autoclave cures. The rationale and development status for this new approach forms the basis of the work described in this paper. The test specimens described herein were fabricated, or are currently being fabricated, by The Boeing Company, while the structural analyses and testing tasks are being performed by NASA and Boeing personnel.

Project ANSICHT. Final repository concept and backfilling and sealing concept for the final repository site model SUeD; Projekt ANSICHT. Endlagerkonzept sowie Verfuell- und Verschlusskonzept fuer das Endlagerstandortmodell SUeD. Technischer Bericht

Energy Technology Data Exchange (ETDEWEB)

Jobmann, Michael; Lommerzheim, Andree

2015-08-03

In the frame of ANSICHT the methodology for the demonstration of safe enclosure for high-level heat generating radioactive wastes is described. The report is based on the safety requirements for final repository concepts and shows a first backfilling and sealing concept that was developed for the final repository site model SUeD. The final repository model SUeD is based on a horizontal line storage concept, the Gorleben (VSG) and ERATO container concept and the mine layout were adopted and adapted to the given conditions. The backfill and sealing concept includes migration barriers, line closures and shaft closures in the frame of a redundant and diverse enclosure system. For all technical and geotechnical barrier components the long-term functional requirements were defined. The backfilling concept of underground cavities considers the variety of possible cavities in the line and infrastructure areas.

Unifying the concept of consciousness across the disciplines: A concept-based, cross-cultural approach

Science.gov (United States)

Jones, Peter N.

The majority of studies concerning consciousness have examined and modeled the concept of consciousness in terms of particular lines of inquiry, a process that has circumscribed the general applicability of any results from such approaches. The purpose of this dissertation was to study consciousness from a concept-based, cross-cultural approach and to attempt to unify the concept across the cultures examined. The 4 cultures are the academic disciplines of philosophy, physics, psychology, and anthropology. Consciousness was examined in terms of how the concept is framed and where the major limitations in each line of inquiry occur. The rationale for examining consciousness as a concept across 4 cultures was to determine whether there was any common component in each line's framing that could be used to unify the concept. The study found that experience itself was the primary unifying factor in each field's framing and that experience was treated as a nonreducible property within each line of inquiry. By taking experience itself (but not subjective experience) as a fundamental property, each culture's concept of consciousness becomes tractable. As such, this dissertation argues that experience should be taken as a fundamental property of the concept. The significance of this analysis is that by taking experience as a fundamental property, it becomes possible to unify the concept across the 4 cultures. This unification is presented as a unity thesis, which is a theory arguing for unification of the concept based on the fundamental of experience. Following this theoretical examination, this paper discusses several key implications of the unity thesis, including implications of the unity thesis for the current status of altered states of consciousness and for the so-called hard and easy problems associated with the concept (at least within Occidental ontology). It is argued that the so-called hard problem does not exist when experience is taken as a fundamental property

The Concept of Sustainable Development as a Paradigm of Development of Sosiety

Directory of Open Access Journals (Sweden)

Khaustova Viktoriia Ye.

2018-03-01

Full Text Available The article is dedicated to studying the concept of sustainable development as a new paradigm of development of humanity. The genesis of the evolution of the views of scientists on the goals, essence, and problems of the introduction of this concept are considered. The interpretation of the concept of “sustainable development” by scientists and practitioners is analyzed, and the main approaches to understanding its essence are grouped. The basic principles of sustainable development are singled out. The main approaches to assessing sustainable development of socio-economic systems at different levels, their content, goals, and features of application are investigated. The views of scientists on the path to achieving sustainable development are considered, and the key discussion aspects in solving this problem are identified. It is shown that the concept of sustainable development has undergone a long evolution and continues to develop in accordance with new global challenges. Sustainable development is associated with the formation of a fundamentally new attitude towards man: on the one hand, as a subject of the ecological and economic system, on the other hand, as the main goal of its development. It is substantiated that the transition to sustainable development on a global scale is possible only with the obligatory condition of coherence of all objects and subjects of this process, which is systemic in nature and connects all levels of the socio-economic system (the global, national, regional, local one and various spheres of its functioning (the economic, social, ecological one.

Application of the lines-of-protection concept to the HTGR-SC/C

International Nuclear Information System (INIS)

1981-09-01

The purpose of this document is to present a method for structuring the safety related design and development plans for the HTGR. This method centers on and develops the concept that the HTGR inherently (and by design) provides independent and successive LOPs against potential core related accidents and any resulting public harm. To exemplify the LOP concept and its application to the HTGR, this document identifies some key bases and assumptions, describes the four LOPs selected for the HTGR, identifies the associated safety goals and plant success criteria, and establishes methods for safety research and development prioritization. A task breakdown structure is then described, which in a complete hierarchial fashion can be used to catalog all safety related tasks necessary to demonstrate LOP success as well as catalog safety research areas which cannot be conveniently grouped under the LOPs

Concept development for HLW disposal research tunnel

International Nuclear Information System (INIS)

Queon, S. K.; Kim, K. S.; Park, J. H.; Jeo, W. J.; Han, P. S.

2003-01-01

In order to dispose high-level radioactive waste in a geological formation, it is necessary to assess the safety of a disposal concept by excavating a research tunnel in the same geological formation as the host rock mass. The design concept of a research tunnel depends on the actual disposal concept, repository geometry, experiments to be carried at the tunnel, and geological conditions. In this study, analysis of the characteristics of the disposal research tunnel, which is planned to be constructed at KAERI site, calculation of the influence of basting impact on neighbor facilities, and computer simuation for mechanical stability analysis using a three-dimensional code, FLAC3D, had been carried out to develop the design concept of the research tunnel

Development, concept and scope of copyright protection in Nigeria ...

African Journals Online (AJOL)

Development, concept and scope of copyright protection in Nigeria: an overview. ... Nnamdi Azikiwe University Journal of International Law and Jurisprudence ... This forms the aim of this paper which focuses essentially on basic issues relating to the development, concept and the scope of protection afforded copyright in ...

Mitigation of Oil in Water Column: Concept Development

Science.gov (United States)

2016-06-01

subsea pipeline leaks , or the leaking of oil from tanks after a damaged vessel has sunk to the bottom. Oil arriving at the surface of the water may...i Classification | CG-926 RDC | author | audience | month year Mitigation of Oil in Water Column: Concept Development Distribution...Center. June 2016 Report No. CG-D-03-16 Mitigation of Oil in Water Column: Concept Development ii UNCLAS//Public | CG-926 RDC

Basic Concepts of CNS Development.

Science.gov (United States)

Nowakowski, R. S.

1987-01-01

The goals of this review are to: (1) provide a set of concepts to aid in the understanding of complex processes which occur during central nervous system (CNS) development; (2) illustrate how they contribute to our knowlege of adult brain anatomy; and (3) delineate how modifications of normal developmental processes may affect the structure and…

Adaptive method of lines

CERN Document Server

Saucez, Ph

2001-01-01

The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

Art Education and the Development of Self-Concept.

Science.gov (United States)

Hausman, Jerome J.

References are often made in art education literature about how art can enhance individuals' self-concepts. This document discusses the work of authors, Manuel Barkan, George Herbert Mead, and Sigmund Freud, who support this concept. Barkan's theory concerning how an individual's personality develops and changes by interacting socially is…

Number Sense on the Number Line

Science.gov (United States)

Woods, Dawn Marie; Ketterlin Geller, Leanne; Basaraba, Deni

2018-01-01

A strong foundation in early number concepts is critical for students' future success in mathematics. Research suggests that visual representations, like a number line, support students' development of number sense by helping them create a mental representation of the order and magnitude of numbers. In addition, explicitly sequencing instruction…

The Development of the Concept of Suicide in Children.

Science.gov (United States)

Normand, Claude L.; Mishara, Brian L.

1992-01-01

Examined development of concept of suicide in 60 children. Found that 10 percent of first, 50 percent of third, and 95 percent of fifth graders had basic understanding of suicide. Attitudes toward suicide were neutral or negative. Concept of suicide was significantly related to concept of death and experiences with death and was also related to…

Integrating health impact assessment into the triple bottom line concept

International Nuclear Information System (INIS)

Mahoney, Mary; Potter, Jenny-Lynn

2004-01-01

This theoretical study explores the links between the Triple Bottom Line (TBL) concept and the principles of HIA and considers the potential role of HIA to provide a mechanism for integrating health concerns within a broader agenda of government and business. TBL is a framework linked to the broader sustainability agenda that underpins and reviews environmental, economic and social performance of organizations. In its simplest form, TBL acts as a tool for reporting to stakeholders/shareholders organizational performance and the nature of the impacts on the community. The links to HIA are clear as both seek to determine the impact (potential and actual) on the health and well-being of the population. The study found that TBL can operate at four levels within organizations ranging from reporting through to full integration with the organization's goals and practices. Health is narrowly defined and there are tensions about how to undertake the social accountability functions. The study shows the potential role for HIA within the broader policy and accountability agenda. As health is one of the main outcomes of an organization's activities it needs to be taken into account at all levels of activity

Development of sealing plug for sweep gas line

International Nuclear Information System (INIS)

Kikuchi, Taiji; Yamada, Hirokazu; Saitoh, Takashi; Nakamichi, Masaru; Tsuchiya, Kunihiko; Kawamura, Hiroshi

2004-03-01

On the irradiation capsule for neutron irradiation test of the tritium breeder, the sealing plug is necessary to prevent a leak of tritium gas when the tritium breeder is picked up from the irradiation capsule after irradiation test. However, the general valve and plug cannot apply to sealing of the sweep gas line because of the following factors, the neutron irradiation effect, limited space in the irradiation capsule, high sealing efficiency, simple method and operation for control. Therefore, the sealing plug for sweep gas line has to be developed. This paper reports the development of the sealing plug for sweep gas line and the operating procedure of the sealing plug in the irradiation capsule. (author)

Development of a "Lac" Operon Concept Inventory (LOCI)

Science.gov (United States)

Stefanski, Katherine M.; Gardner, Grant E.; Seipelt-Thiemann, Rebecca L.

2016-01-01

Concept inventories (CIs) are valuable tools for educators that assess student achievement and identify misconceptions held by students. Results of student responses can be used to adjust or develop new instructional methods for a given topic. The regulation of gene expression in both prokaryotes and eukaryotes is an important concept in genetics…

Social capital for industrial development: operationalizing the concept

NARCIS (Netherlands)

P. Knorringa (Peter); I.P. van Staveren (Irene)

2006-01-01

textabstractThe present report on Social capital for industrial development: operationalizing the concept is part of the broader Combating Marginalization and Poverty through Industrial Development (COMPID), research programme of the United Nations Industrial Development Organization (UNIDO),

Advanced Messaging Concept Development Basic Safety Message

Data.gov (United States)

Department of Transportation — Contains all Basic Safety Messages (BSMs) collected during the Advanced Messaging Concept Development (AMCD) field testing program. For this project, all of the Part...

Programming language concepts for software developers

DEFF Research Database (Denmark)

Sestoft, Peter

2008-01-01

This note describes and motivates our current plans for an undergraduate course on programming language concepts for software development students. We describe the competences we expect students to acquire as well as the topics covered by the course. We plan to use C# and Scheme as instruction...

Wilson lines in quantum field theory

Energy Technology Data Exchange (ETDEWEB)

Cherednikov, Igor Olegovich [Antwerpen Univ., Antwerp (Belgium). Fysica Dept.; Joint Institute of Nuclear Research, Moscow (Russian Federation). Bogoliubov Lab. of Theoretical Physics; Mertens, Tom; Veken, Frederik F. van der [Antwerpen Univ., Antwerp (Belgium). Fysica Dept.

2014-07-01

Wilson lines (also known as gauge links or eikonal lines) can be introduced in any gauge field theory. Although the concept of the Wilson exponentials finds an enormously wide range of applications in a variety of branches of modern quantum field theory, from condensed matter and lattice simulations to quantum chromodynamics, high-energy effective theories and gravity, there are surprisingly few books or textbooks on the market which contain comprehensive pedagogical introduction and consecutive exposition of the subject. The objective of this book is to get the potential reader acquainted with theoretical and mathematical foundations of the concept of the Wilson loops in the context of modern quantum field theory, to teach him/her to perform independently some elementary calculations with Wilson lines, and to familiarize him/her with the recent development of the subject in different important areas of research. The target audience of the book consists of graduate and postgraduate students working in various areas of quantum field theory, as well as researchers from other fields.

Wilson lines in quantum field theory

International Nuclear Information System (INIS)

Cherednikov, Igor Olegovich; Joint Institute of Nuclear Research, Moscow; Mertens, Tom; Veken, Frederik F. van der

2014-01-01

Wilson lines (also known as gauge links or eikonal lines) can be introduced in any gauge field theory. Although the concept of the Wilson exponentials finds an enormously wide range of applications in a variety of branches of modern quantum field theory, from condensed matter and lattice simulations to quantum chromodynamics, high-energy effective theories and gravity, there are surprisingly few books or textbooks on the market which contain comprehensive pedagogical introduction and consecutive exposition of the subject. The objective of this book is to get the potential reader acquainted with theoretical and mathematical foundations of the concept of the Wilson loops in the context of modern quantum field theory, to teach him/her to perform independently some elementary calculations with Wilson lines, and to familiarize him/her with the recent development of the subject in different important areas of research. The target audience of the book consists of graduate and postgraduate students working in various areas of quantum field theory, as well as researchers from other fields.

Resonant Wave Energy Converters: Concept development

International Nuclear Information System (INIS)

Arena, Felice; Barbaro, Giuseppe; Fiamma, Vincenzo; Laface, Valentina; Malara, Giovanni; Romolo, Alessandra; Strati, Federica Mara

2015-01-01

The Resonant Wave Energy Converter (REWEC) is a device for converting sea wave energy to electrical energy. It belongs to the family of Oscillating Water Columns and is composed by an absorbing chamber connected to the open sea via a vertical duct. The paper gives a holistic view on the concept development of the device, starting from its implementation in the context of submerged breakwaters to the recently developed vertical breakwaters. [it

Understanding Mammalian Germ Line Development with In Vitro Models.

Science.gov (United States)

Martínez-Arroyo, Ana M; Míguez-Forján, Jose M; Remohí, Jose; Pellicer, Antonio; Medrano, Jose V

2015-09-15

Germ line development is crucial in organisms with sexual reproduction to complete their life cycle. In mammals, knowledge about germ line development is based mainly on the mouse model, in which genetic and epigenetic events are well described. However, little is known about how germ line development is orchestrated in humans, especially in the earliest stages. New findings derived from human in vitro models to obtain germ cells can shed light on these questions. This comprehensive review summarizes the current knowledge about mammalian germ line development, emphasizing the state of the art obtained from in vitro models for germ cell-like cell derivation. Current knowledge of the pluripotency cycle and germ cell specification has allowed different in vitro strategies to obtain germ cells with proven functionality in mouse models. Several reports during the last 10 years show that in vitro germ cell derivation with proven functionality to generate a healthy offspring is possible in mice. However, differences in the embryo development and pluripotency potential between human and mouse make it difficult to extrapolate these results. Further efforts on both human and mouse in vitro models to obtain germ cells from pluripotent stem cells may help to elucidate how human physiological events take place; therefore, therapeutic strategies can also be considered.

Heuristics Applied in the Development of Advanced Space Mission Concepts

Science.gov (United States)

Nilsen, Erik N.

1998-01-01

Advanced mission studies are the first step in determining the feasibility of a given space exploration concept. A space scientist develops a science goal in the exploration of space. This may be a new observation method, a new instrument or a mission concept to explore a solar system body. In order to determine the feasibility of a deep space mission, a concept study is convened to determine the technology needs and estimated cost of performing that mission. Heuristics are one method of defining viable mission and systems architectures that can be assessed for technology readiness and cost. Developing a viable architecture depends to a large extent upon extending the existing body of knowledge, and applying it in new and novel ways. These heuristics have evolved over time to include methods for estimating technical complexity, technology development, cost modeling and mission risk in the unique context of deep space missions. This paper examines the processes involved in performing these advanced concepts studies, and analyzes the application of heuristics in the development of an advanced in-situ planetary mission. The Venus Surface Sample Return mission study provides a context for the examination of the heuristics applied in the development of the mission and systems architecture. This study is illustrative of the effort involved in the initial assessment of an advance mission concept, and the knowledge and tools that are applied.

Developing user-centered concepts for language learning video games

OpenAIRE

Poels, Yorick; Annema, Jan Henk; Zaman, Bieke; Cornillie, Frederik

2012-01-01

This paper will report on an ongoing project which aims to develop video games for language learning through a user-centered and evidence-based approach. Therefore, codesign sessions were held with adolescents between 14 and 16 years old, in order to gain insight into their preferences for educational games for language learning. During these sessions, 11 concepts for video games were developed. We noticed a divide between the concepts for games that were oriented towa...

Aeronautics Autonomy Testbed Capability (AATC) Team Developed Concepts

Science.gov (United States)

Smith, Phillip J.

2018-01-01

In 2015, the National Aeronautics and Space Administration (NASA) formed a multi-center, interdisciplinary team of engineers from three different aeronautics research centers who were tasked with improving NASA autonomy research capabilities. This group was subsequently named the Aeronautics Autonomy Testbed Capability (AATC) team. To aid in confronting the autonomy research directive, NASA contracted IDEO, a design firm, to provide consultants and guides to educate NASA engineers through the practice of design thinking, which is an unconventional method for aerospace design processes. The team then began learning about autonomy research challenges by conducting interviews with a diverse group of researchers and pilots, military personnel and civilians, experts and amateurs. Part of this design thinking process involved developing ideas for products or programs known as concepts that could enable real world fulfillment of the most important latent needs identified through analysis of the interviews. The concepts are intended to be sacrificial, intermediate steps in the design thinking process and are presented in this report to record the efforts of the AATC group. Descriptions are provided in present tense to allow for further ideation and imagining the concept as reality as was attempted during the teams discussions and interviews. This does not indicate that the concepts are actually in practice within NASA though there may be similar existing programs independent of AATC. These concepts were primarily created at two distinct stages during the design thinking process. After the initial interviews, there was a workshop for concept development and the resulting ideas are shown in this work as from the First Round. As part of succeeding interviews, the team members presented the First Round concepts to refine the understanding of existing research needs. This knowledge was then used to generate an additional set of concepts denoted as the Second Round. Some

New Developments in the Critical Group Concept

International Nuclear Information System (INIS)

John Till; David Cancio; Mary Clark; Donald Cool; John Cooper; Toshiso Kosako; Andrew McEwan; Kaare Ulbak; Ciska Zuur

2006-01-01

A task group of Committee 4 has developed a report on defining the individual for the purposes of radiation protection of the public. The report expands and develops the critical group concept giving guidance for both probabilistic and deterministic assessments. The name 'representative individual' is now proposed to replace the term ' critical group'. (N.C.)

Renewable energy for sustainable urban development: Redefining the concept of energisation

Energy Technology Data Exchange (ETDEWEB)

Nissing, Christian [Environmental and Process Systems Engineering Research Group, Department of Chemical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701, Cape Town (South Africa); Blottnitz, Harro von, E-mail: Harro.vonBlottnitz@uct.ac.z [Environmental and Process Systems Engineering Research Group, Department of Chemical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701, Cape Town (South Africa); African Centre for Cities, University of Cape Town (South Africa)

2010-05-15

It is widely recognised that access to and supply of modern energy play a key role in poverty alleviation and sustainable development. The emerging concept of energisation seems to capture this idea; however, there is no unified definition at the point of writing. In this paper, the aim is to propose a new and comprehensive definition of the concept of energisation. The chronological development of this concept is investigated by means of a literature review, and a subsequent critique is offered of current definitions and usage of the concept. Building upon these first insights, two planned cases of energisation in post-apartheid South Africa are contrasted to an unplanned one: they are the national electrification programme, the integrated energy centres initiative, and a wood fuelled local economy in Khayelitsha, Cape Town's biggest township. Especially the latter case, based on original data collection by the authors, provides a new understanding of specific elements affecting energisation. Finally, a new and detailed definition of the concept of sustainable energisation is developed by systematically reiterating three key elements: the target group, the concept of energy services, and sustainable development.

Renewable energy for sustainable urban development. Redefining the concept of energisation

Energy Technology Data Exchange (ETDEWEB)

Nissing, Christian [Environmental and Process Systems Engineering Research Group, Department of Chemical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701, Cape Town (South Africa); Von Blottnitz, Harro [Environmental and Process Systems Engineering Research Group, Department of Chemical Engineering, University of Cape Town, Private Bag X3, Rondebosch 7701, Cape Town (South Africa); African Centre for Cities, University of Cape Town (South Africa)

2010-05-15

It is widely recognised that access to and supply of modern energy play a key role in poverty alleviation and sustainable development. The emerging concept of energisation seems to capture this idea; however, there is no unified definition at the point of writing. In this paper, the aim is to propose a new and comprehensive definition of the concept of energisation. The chronological development of this concept is investigated by means of a literature review, and a subsequent critique is offered of current definitions and usage of the concept. Building upon these first insights, two planned cases of energisation in post-apartheid South Africa are contrasted to an unplanned one: they are the national electrification programme, the integrated energy centres initiative, and a wood fuelled local economy in Khayelitsha, Cape Town's biggest township. Especially the latter case, based on original data collection by the authors, provides a new understanding of specific elements affecting energisation. Finally, a new and detailed definition of the concept of sustainable energisation is developed by systematically reiterating three key elements: the target group, the concept of energy services, and sustainable development. (author)

Renewable energy for sustainable urban development: Redefining the concept of energisation

International Nuclear Information System (INIS)

Nissing, Christian; Blottnitz, Harro von

2010-01-01

It is widely recognised that access to and supply of modern energy play a key role in poverty alleviation and sustainable development. The emerging concept of energisation seems to capture this idea; however, there is no unified definition at the point of writing. In this paper, the aim is to propose a new and comprehensive definition of the concept of energisation. The chronological development of this concept is investigated by means of a literature review, and a subsequent critique is offered of current definitions and usage of the concept. Building upon these first insights, two planned cases of energisation in post-apartheid South Africa are contrasted to an unplanned one: they are the national electrification programme, the integrated energy centres initiative, and a wood fuelled local economy in Khayelitsha, Cape Town's biggest township. Especially the latter case, based on original data collection by the authors, provides a new understanding of specific elements affecting energisation. Finally, a new and detailed definition of the concept of sustainable energisation is developed by systematically reiterating three key elements: the target group, the concept of energy services, and sustainable development.

Point Cloud Analysis for Uav-Borne Laser Scanning with Horizontally and Vertically Oriented Line Scanners - Concept and First Results

Science.gov (United States)

Weinmann, M.; Müller, M. S.; Hillemann, M.; Reydel, N.; Hinz, S.; Jutzi, B.

2017-08-01

In this paper, we focus on UAV-borne laser scanning with the objective of densely sampling object surfaces in the local surrounding of the UAV. In this regard, using a line scanner which scans along the vertical direction and perpendicular to the flight direction results in a point cloud with low point density if the UAV moves fast. Using a line scanner which scans along the horizontal direction only delivers data corresponding to the altitude of the UAV and thus a low scene coverage. For these reasons, we present a concept and a system for UAV-borne laser scanning using multiple line scanners. Our system consists of a quadcopter equipped with horizontally and vertically oriented line scanners. We demonstrate the capabilities of our system by presenting first results obtained for a flight within an outdoor scene. Thereby, we use a downsampling of the original point cloud and different neighborhood types to extract fundamental geometric features which in turn can be used for scene interpretation with respect to linear, planar or volumetric structures.

Wilson lines in quantum field theory

CERN Document Server

Cherednikov, Igor O; Veken, Frederik F van der

2014-01-01

The objective of this book is to get the reader acquainted with theoretical and mathematical foundations of the concept of Wilson loops in the context of modern quantum field theory. It teaches how to perform independently with some elementary calculations on Wilson lines, and shows the recent development of the subject in different important areas of research.

New Developments in the Critical Group Concept

Energy Technology Data Exchange (ETDEWEB)

John Till; David Cancio; Mary Clark; Donald Cool; John Cooper; Toshiso Kosako; Andrew McEwan; Kaare Ulbak; Ciska Zuur [ICRP Secretariat, Stockholm (Sweden)

2006-07-01

A task group of Committee 4 has developed a report on defining the individual for the purposes of radiation protection of the public. The report expands and develops the critical group concept giving guidance for both probabilistic and deterministic assessments. The name 'representative individual' is now proposed to replace the term ' critical group'. (N.C.)

OffWindSolver: Wind farm design tool based on actuator line/actuator disk concept in OpenFoam architecture

Directory of Open Access Journals (Sweden)

Panjwani Balram

2014-01-01

Full Text Available Wind energy is a good alternative to meet the energy requirements in some parts of the world; however the efficiency of wind farm depends on the optimized location of the wind turbines. Therefore a software tool that is capable of predicting the in-situ performance of multiple turbine installations in different operating conditions with reliable accuracy is needed. In present study wind farm layout design tool OffWindSolver is developed within the OpenFoam architecture. Unsteady PisoFoam solver is extended to account for wind turbines, where each turbine is modeled as a sink term in the momentum equation. Turbine modeling is based on actuator line concepts derived from SOWFA code, where each blade of the turbine is represented as a line. The loading on each line/blade of the turbine is estimated using the Blade Element Method (BEM. The inputs for the solver are tabulated airfoil aerodynamic data, dimension and height of the wind turbines, wind magnitude and direction. OffWindSolver is validated for a real wind farm – Lillgrund offshore facility in Sweden/Denmark operated by Vattenfall Vindkraft AB. Because of the scale of the computation, we only examine the effect of wind from one direction at one speed. In the absence of time dependent Marine Atmospheric Boundary Layer (MABL, a log wind profile with surface roughness of 0.04 is used at the inlet. The simulated power production of each turbine is compared to the field data and large-eddy simulation. The overall power of the wind farm is well predicted. The simulation shows the significant decreases of the power for those turbines that were in the wake.

Technical Meeting on Developing Deep-Burn Concepts using HTGRs. Objectives and Expectations

International Nuclear Information System (INIS)

Tyobeka, Bismark

2013-01-01

The objectives of the meeting are: • To explore various Deep-Burn options and concepts being developed in Member States; • To appraise the progress made towards the maturity of Deep-Burn concepts based on HTGR designs; • To identify technology development challenges towards the realization of Deep-Burn concepts; • To propose collaborative ways to address technology development challenges

Development of Flexible Software Process Lines with Variability Operations

DEFF Research Database (Denmark)

Schramm, Joachim; Dohrmann, Patrick; Kuhrmann, Marco

2015-01-01

families of processes and, as part of this, variability operations provide means to modify and reuse pre-defined process assets. Objective: Our goal is to evaluate the feasibility of variability operations to support the development of flexible software process lines. Method: We conducted a longitudinal......Context: Software processes evolve over time and several approaches were proposed to support the required flexibility. Yet, little is known whether these approaches sufficiently support the development of large software processes. A software process line helps to systematically develop and manage...

Progress in Development of I2S-LWR Concept

International Nuclear Information System (INIS)

Petrovic, Bojan

2014-01-01

The paper will present the progress in developing the Integral Inherently Safe Light Water Reactor (12S-LWR) concept. This new concept aims to combine the competitive economics of a large nuclear power plant, with enhanced safety achieved by the integral primary circuit configuration (previously considered only for PWRs with power levels not exceeding several hundred MWc), and with enhanced accident tolerance (to address concerns after the Fukushima Dai-lchi accidents). Several new technologies are being developed to enable this concept, including novel silicide fuel and micro-channel primary heat exchangers. This project is performed by a multi-disciplinary multi-organization team led by Georgia Tech, including academia, a national laboratory, nuclear industry, and a power utility, wit expected participation of the University of Zagreb. (author)

Using a systems engineering process to develop engineered barrier system design concepts

International Nuclear Information System (INIS)

Jardine, L.J.; Short, D.W.

1991-05-01

The methodology used to develop conceptual designs of the engineered barrier system and waste packages for a geologic repository is based on an iterative systems engineering process. The process establishes a set of general mission requirements and then conducts detailed requirements analyses using functional analyses, system concept syntheses, and trade studies identifications to develop preliminary system concept descriptions. The feasible concept descriptions are ranked based on selection factors and criteria and a set of preferred concept descriptions is then selected for further development. For each of the selected concept descriptions, a specific set of requirements, including constraints, is written to provide design guidance for the next and more detailed phase of design. The process documents all relevant waste management system requirements so that the basis and source for the specific design requirements are traceable and clearly established. Successive iterations performed during design development help to insure that workable concepts are generated to satisfy the requirements. 4 refs., 2 figs

Cell line development for biomanufacturing processes: recent advances and an outlook.

Science.gov (United States)

Le, Huong; Vishwanathan, Nandita; Jacob, Nitya M; Gadgil, Mugdha; Hu, Wei-Shou

2015-08-01

At the core of a biomanufacturing process for recombinant proteins is the production cell line. It influences the productivity and product quality. Its characteristics also dictate process development, as the process is optimized to complement the producing cell to achieve the target productivity and quality. Advances in the past decade, from vector design to cell line screening, have greatly expanded our capability to attain producing cell lines with certain desired traits. Increasing availability of genomic and transcriptomic resources for industrially important cell lines coupled with advances in genome editing technology have opened new avenues for cell line development. These developments are poised to help biosimilar manufacturing, which requires targeting pre-defined product quality attributes, e.g., glycoform, to match the innovator's range. This review summarizes recent advances and discusses future possibilities in this area.

Evolving Concepts of Development through the Experience of ...

International Development Research Centre (IDRC) Digital Library (Canada)

This project will explore the experiences of emerging and developing countries in order to identify how the concept of international development has evolved and where it they may be heading. It will do so through a series of workshops convening scholars and practitioners from both the developing and the industrialized ...

Development of a metal-clad advanced composite shear web design concept

Science.gov (United States)

Laakso, J. H.

1974-01-01

An advanced composite web concept was developed for potential application to the Space Shuttle Orbiter main engine thrust structure. The program consisted of design synthesis, analysis, detail design, element testing, and large scale component testing. A concept was sought that offered significant weight saving by the use of Boron/Epoxy (B/E) reinforced titanium plate structure. The desired concept was one that was practical and that utilized metal to efficiently improve structural reliability. The resulting development of a unique titanium-clad B/E shear web design concept is described. Three large scale components were fabricated and tested to demonstrate the performance of the concept: a titanium-clad plus or minus 45 deg B/E web laminate stiffened with vertical B/E reinforced aluminum stiffeners.

Development of the Biological Experimental Design Concept Inventory (BEDCI)

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gulnur

2014-01-01

Interest in student conception of experimentation inspired the development of a fully validated 14-question inventory on experimental design in biology (BEDCI) by following established best practices in concept inventory (CI) design. This CI can be used to diagnose specific examples of non-expert-like thinking in students and to evaluate the…

Guidelines for Using OAR Concepts in a DoD Product Line Acquisition Context

National Research Council Canada - National Science Library

Bergey, John

2000-01-01

Many DoD organizations are considering product line initiatives as a means of overcoming the issues of quality, cost and schedule inherent in a "one-at-a-time" system development or acquisition paradigm...

Theoretical Insights for Developing the Concept of Social Technologies

Directory of Open Access Journals (Sweden)

Rūta Tamošiūnaitė

2013-02-01

Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies. Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed. Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences. Article Type: conceptual paper.

Theoretical Insights for Developing the Concept of Social Technologies

Directory of Open Access Journals (Sweden)

Monika Skaržauskaitė

2012-12-01

Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies.Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed.Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences.

Development of FBR integrity system code. Basic concept

International Nuclear Information System (INIS)

Asayama, Tai

2001-05-01

For fast breeder reactors to be commercialized, they must be more reliable, safer, and at the same, economically competitive with future light water reactors. Innovation of elevated temperature structural design standard is necessary to achieve this goal. The most powerful way is to enlarge the scope of structural integrity code to cover items other than design evaluation that has been addressed in existing codes. Items that must be newly covered are prerequisites of design, fabrication, examination, operation and maintenance, etc. This allows designers to choose the most economical combination of design variations to achieve specific reliability that is needed for a particular component. Designing components by this concept, a cost-minimum design of a whole plant can be realized. By determining the reliability that must be achieved for a component by risk technologies, further economical improvement can be expected by avoiding excessive quality. Recognizing the necessity for the codes based on the new concept, the development of 'FBR integrity system code' began in 2000. Research and development will last 10 years. For this development, the basic logistics and system as well as technologies that materialize the concept are necessary. Original logistics and system must be developed, because no existing researches are available in and out of Japan. This reports presents the results of the work done in the first year regarding the basic idea, methodology, and structure of the code. (author)

Development of Flexible Software Process Lines with Variability Operations

DEFF Research Database (Denmark)

Dohrmann, Patrick; Schramm, Joachim; Kuhrmann, Marco

2016-01-01

the development of flexible software process lines. Method: We conducted a longitudinal study in which we studied 5 variants of the V-Modell XT process line for 2 years. Results: Our results show the variability operation instrument feasible in practice. We analyzed 616 operation exemplars addressing various...

Development of MMIS design concepts for the KNGR

Energy Technology Data Exchange (ETDEWEB)

Park, Jong Kyun; Ku, In Su; Heo, Seop; Jeong, Chel Hwan; Lee, Hyun Chol; Park, Hui Yun; Lee, Chol Gwon; So, Yong Suk; Kim, Dong Hun; Jang, Gwi Sook; Lee, Ki Yonug; Lee, Jun; Kim, Young In [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-12-01

The design goals of MMIS for the next generation nuclear power plant are to improve plant safety and the cost effectiveness of nuclear power plants, and to meet with regulatory requirements. For the optimized design of MMIS, conceptual design bases are required for the optimization of MMIS design to establish the design concepts for NGR MMIS. The conceptual design bases are also required for performing the basic design, and verifying the design. The objectives of this study are establishment of MMIS design bases and the development of next generation MMIS configuration concepts. The MMIS design bases for by adopting MMIS requirements developed in the previous study on next generation reactor evaluation techniques and advanced MMIS technologies. The next generation MMIS design requirements are to be developed based on the device obsolescence problems by applying modern digital technology. This report describes the design concepts for the next generation MMIS. In order to develop the design concepts, new technologies were analyzed, and the characteristics of new advanced MMIS designs were reviewed. In addition, reviewing the advanced design features (ADF) resulted from the 3 rd stage of standardization project, the strategy for the application of the results from these activities are prepared. This report includes the comparison results of the design characteristics of next generation MMIS with those of existing plants, YGN 3 and 4, UCN 3 and 4, and NUPLEX 80+. This report also describes the conceptual MMIS configuration of next generation control room, based on the results from the comparison. The results of this study will be an input for the detailed design guidelines and a regulatory requirements review report for the next generation MMIS design, and provide basis for the basis and detailed design of MMI and I and C for main control room. 1 fig., 1 tab., 46 refs. (Author) .new.

Development of MMIS design concepts for the KNGR

International Nuclear Information System (INIS)

Park, Jong Kyun; Ku, In Su; Heo, Seop; Jeong, Chel Hwan; Lee, Hyun Chol; Park, Hui Yun; Lee, Chol Gwon; So, Yong Suk; Kim, Dong Hun; Jang, Gwi Sook; Lee, Ki Yonug; Lee, Jun; Kim, Young In

1995-12-01

The design goals of MMIS for the next generation nuclear power plant are to improve plant safety and the cost effectiveness of nuclear power plants, and to meet with regulatory requirements. For the optimized design of MMIS, conceptual design bases are required for the optimization of MMIS design to establish the design concepts for NGR MMIS. The conceptual design bases are also required for performing the basic design, and verifying the design. The objectives of this study are establishment of MMIS design bases and the development of next generation MMIS configuration concepts. The MMIS design bases for by adopting MMIS requirements developed in the previous study on next generation reactor evaluation techniques and advanced MMIS technologies. The next generation MMIS design requirements are to be developed based on the device obsolescence problems by applying modern digital technology. This report describes the design concepts for the next generation MMIS. In order to develop the design concepts, new technologies were analyzed, and the characteristics of new advanced MMIS designs were reviewed. In addition, reviewing the advanced design features (ADF) resulted from the 3 rd stage of standardization project, the strategy for the application of the results from these activities are prepared. This report includes the comparison results of the design characteristics of next generation MMIS with those of existing plants, YGN 3 and 4, UCN 3 and 4, and NUPLEX 80+. This report also describes the conceptual MMIS configuration of next generation control room, based on the results from the comparison. The results of this study will be an input for the detailed design guidelines and a regulatory requirements review report for the next generation MMIS design, and provide basis for the basis and detailed design of MMI and I and C for main control room. 1 fig., 1 tab., 46 refs. (Author) .new

Development of physical conceptions of fast reactors

International Nuclear Information System (INIS)

Khomyakov, Yu.S.; Matveev, V.I.; Moiseev, A.V.

2013-01-01

• Russian experience in developing fast reactors has proved clearly scientific justification of conceptual physical principles and their technical feasibility. • However, the potential of fast reactors caused by their physical features has not been fully realized. • In order to assure the real possibility of transition to the nuclear power with fast reactors by about 2030 it is necessary to consistently update fast reactor designs for solving the following key problems: - increasing of self-protection level of reactor core; - improvement of technical and economical characteristics; - solution of the problems related to the fuel supply of nuclear power and assimilation of closed nuclear fuel cycle; - disposal of long lived radioactive waste and transmutation of minor actinides. • Russian program (2010-2020) on the development of basic concepts of the new generation reactors implies successive solution of the above problems. • New technical decisions will be demonstrated by development and assimilation of the new reactors: - BN-800 – development of the fuel cycle infrastructure and mastering of the new types of fuel; - BN-1200 reactor – demonstration economical efficiency of fast reactor and new level of safety; - BREST development and demonstration new heavy liquid metal coolant technology and alternative design concept

Application of reliability based design concepts to transmission line structure foundations. Part 2

International Nuclear Information System (INIS)

DiGioia, A.M. Jr.; Rojas-Gonzalez, L.F.

1991-01-01

The application of reliability based design (RBD) methods to transmission line structure foundations has developed somewhat more slowly than that for the other structural components in line systems. In a previous paper, a procedure was proposed for the design of transmission line structures foundations using a probability based load and resistance factor design (LRFD) format. This procedure involved the determination of a foundation strength factor, φ F , which was used as a multiplier of the calculated nominal design strength to estimate the five percent exclusion limit strength required in the calculated nominal design strength to estimate the five percent exclusion limit strength required in the LRFD equation. Statistical analyses of results from full-scale load tests were used to obtain φ F values applicable to various nominal design strength equations and for drilled shafts subjected to uplift loads. These results clearly illustrated the significant economic benefits of conducting more detailed subsurface investigations for the design of transmission line structure foundations. A design example was also presented. In this paper the proposed procedure is extended to laterally load drilled shafts

Life on the Number Line: Routes to Understanding Fraction Magnitude for Students With Difficulties Learning Mathematics.

Science.gov (United States)

Gersten, Russell; Schumacher, Robin F; Jordan, Nancy C

Magnitude understanding is critical for students to develop a deep understanding of fractions and more advanced mathematics curriculum. The research reports in this special issue underscore magnitude understanding for fractions and emphasize number lines as both an assessment and an instructional tool. In this commentary, we discuss how number lines broaden the concept of fractions for students who are tied to the more general part-whole representations of area models. We also discuss how number lines, compared to other representations, are a superior and more mathematically correct way to explain fraction concepts.

The hybrid reactor project based on the straight field line mirror concept

Science.gov (United States)

Ågren, O.; Noack, K.; Moiseenko, V. E.; Hagnestâl, A.; Källne, J.; Anglart, H.

2012-06-01

The straight field line mirror (SFLM) concept is aiming towards a steady-state compact fusion neutron source. Besides the possibility for steady state operation for a year or more, the geometry is chosen to avoid high loads on materials and plasma facing components. A comparatively small fusion hybrid device with "semi-poor" plasma confinement (with a low fusion Q factor) may be developed for industrial transmutation and energy production from spent nuclear fuel. This opportunity arises from a large fission to fusion energy multiplication ratio, Qr = Pfis/Pfus>>1. The upper bound on Qr is primarily determined by geometry and reactor safety. For the SFLM, the upper bound is Qr≈150, corresponding to a neutron multiplicity of keff=0.97. Power production in a mirror hybrid is predicted for a substantially lower electron temperature than the requirement Te≈10 keV for a fusion reactor. Power production in the SFLM seems possible with Q≈0.15, which is 10 times lower than typically anticipated for hybrids (and 100 times smaller than required for a fusion reactor). This relaxes plasma confinement demands, and broadens the range for use of plasmas with supra-thermal ions in hybrid reactors. The SFLM concept is based on a mirror machine stabilized by qudrupolar magnetic fields and large expander tanks beyond the confinement region. The purpose of the expander tanks is to distribute axial plasma loss flow over a sufficiently large area so that the receiving plates can withstand the heat. Plasma stability is not relying on a plasma flow into the expander regions. With a suppressed plasma flow into the expander tanks, a possibility arise for higher electron temperature. A brief presentation will be given on basic theory for the SFLM with plasma stability and electron temperature issues, RF heating computations with sloshing ion formation, neutron transport computations with reactor safety margins and material load estimates, magnetic coil designs as well as a discussion on

Protection devices in the transmission grids, German practice. Typical protection concepts in Germany's power transmission lines; Schutzsysteme im Uebertragungsnetz, deutsche Praxis. Typische Schutzkonzepte im deutschen Uebertragungsnetz

Energy Technology Data Exchange (ETDEWEB)

Herrmann, Hans-Joachim [Siemens AG, Nuernberg (Germany). Sektor Energy, Energy Automation; Ludwig, Andrea [50 Hertz Transmission GmbH, Berlin (Germany). Schutztechnik, Anlagenmanagement; Kuehn, Holger [Tennet TSO GmbH, Bayreuth (Germany). Schutztechnik, Assetmanagement/Umspannwerke; Oechsle, Fred [EnBW Regional AG, Stuttgart (Germany). Netzschutz, Netzservice - Projekte Strom

2011-04-18

The contribution presents typical protection concepts for power grids. Solutions for power plant feed-in, bus bar, transmission lines and coupling transformer are explained. General information is provided on triggering concepts, on the design of d.c. power supply, selection of current inverters, and other subjects.

Development of an induction motor abnormality monitoring system(IMAMS) using power line signal analysis

International Nuclear Information System (INIS)

Jung, Jae Cheon

1997-02-01

An induction motor abnormality monitoring system using power line signal analysis is developed in this work. Various studies have focused their attention on the detection of particular harmonic frequencies produced from each defect mode of motors. However, these harmonic frequencies are valuable only when the motor has a continuous slip frequency and operate in constant torque/load condition. The basic concept of the system developed in this work is to detect the characteristic harmonic frequencies occurred when the motor is in abnormal state and to compare it with a predetermined setpoint. Based on these analyses, the place and degree of defect can be easily identified. The experimental results under test bench simulation are also introduced. To find out an alternative way to obtain a threshold level independent of slip/torque, with the rotating field theory, the ratio between harmonic current and total current was calculated with the simplified circuit that is equivalent to two abnormal cases, such as the spatial rotor resistance variation and the symmetrical components changes with field. Also, the threshold level calculation was done with performed the rotating field theory. The results show that they are in good agreement with a experimental results. Further studies are undertaken to extend this work to the on-line monitoring and diagnostic system with a likelihood ratio test method for field application

POINT CLOUD ANALYSIS FOR UAV-BORNE LASER SCANNING WITH HORIZONTALLY AND VERTICALLY ORIENTED LINE SCANNERS – CONCEPT AND FIRST RESULTS

Directory of Open Access Journals (Sweden)

M. Weinmann

2017-08-01

Full Text Available In this paper, we focus on UAV-borne laser scanning with the objective of densely sampling object surfaces in the local surrounding of the UAV. In this regard, using a line scanner which scans along the vertical direction and perpendicular to the flight direction results in a point cloud with low point density if the UAV moves fast. Using a line scanner which scans along the horizontal direction only delivers data corresponding to the altitude of the UAV and thus a low scene coverage. For these reasons, we present a concept and a system for UAV-borne laser scanning using multiple line scanners. Our system consists of a quadcopter equipped with horizontally and vertically oriented line scanners. We demonstrate the capabilities of our system by presenting first results obtained for a flight within an outdoor scene. Thereby, we use a downsampling of the original point cloud and different neighborhood types to extract fundamental geometric features which in turn can be used for scene interpretation with respect to linear, planar or volumetric structures.

Designing of a technological line in the context of controlling with the use of integration of the virtual controller with the mechatronics concept designer module of the PLM Siemens NX software

Science.gov (United States)

Herbuś, K.; Ociepka, P.

2017-08-01

In the work is examined the sequential control system of a technological line in the form of the final part of a system of an internal transport. The process of designing this technological line using the computer-aided approach ran concurrently in two different program environments. In the Mechatronics Concept Designer module of the PLM Siemens NX software was developed the 3D model of the technological line prepared for verification the logic interrelations implemented in the control system. For this purpose, from the whole system of the technological line, it was distinguished the sub-system of actuators and sensors, because their correct operation determines the correct operation of the whole system. Whereas in the application of the virtual controller have been implemented the algorithms of work of the planned line. Then both program environments have been integrated using the OPC server, which enables the exchange of data between the considered systems. The data on the state of the object and the data defining the way and sequence of operation of the technological line are exchanged between the virtual controller and the 3D model of the technological line in real time.

Advanced concepts under development in the United States Breeder-Fuel-Reprocessing Program

International Nuclear Information System (INIS)

Burch, W.D.

1981-01-01

Advanced concepts and techniques for the fuel reprocessing step are being developed. These concepts have been incorporated into the conceptual design of a Hot Experimental Facility (HEF), which is intended to demonstrate reprocessing of the first US breeder demonstration reactor. To achieve system reliability and reduce occupational doses, a concept of totally remote operation and maintenance (termed Remotex) has been conceived and is being developed. In this concept, maintenance and mechanical operations are accomplished with remotely operated bilateral force-reflecting electronic master/slave manipulators. Suitable transport systems, coupled with remote closed-circuit television viewing, are provided to extend man's capabilities into the hostile cell environment. New equipment concepts are being developed for the fuel dismantling and shearing step, a high-temperature dry process termed voloxidation to remove tritium, a continuous rotary dissolver, and for an improved centrifugal solvent contractor. Techniques have been developed, using engineering-scale equipment with active tracers for retention of 85 Kr, radioiodine, 14 C, and 3 H

Development of the Central Dogma Concept Inventory (CDCI) Assessment Tool

OpenAIRE

Newman, Dina L.; Snyder, Christopher W.; Fisk, J. Nick; Wright, L. Kate

2016-01-01

Scientific teaching requires scientifically constructed, field-tested instruments to accurately evaluate student thinking and gauge teacher effectiveness. We have developed a 23-question, multiple select?format assessment of student understanding of the essential concepts of the central dogma of molecular biology that is appropriate for all levels of undergraduate biology. Questions for the Central Dogma Concept Inventory (CDCI) tool were developed and iteratively revised based on student lan...

Considerations on a concept of nuclear security culture and its development

International Nuclear Information System (INIS)

Miyamoto, Naoki

2013-01-01

In March 2012, domestic regulations regarding physical protection measures of nuclear facilities were amended to strengthen those measures. By these amendments, nuclear operators were requested to stipulate their corporate system to develop nuclear security culture on their physical protection plans, and therefore, attention has been drawn on a concept of nuclear security culture and its development. In the light of these situations, this presentation will consider the concept of nuclear security culture and its development. Firstly, focusing attention on 'culture', a concept of 'corporate culture' which is emphasized in corporate management will be analyzed. Then, with reference to 'safety culture', elements that seems to correspond to the concept of nuclear security culture will be extracted. Secondly, particularizing a 'corporate system to develop nuclear security culture', by reviewing a notion of 'Corporate Social Responsibility (CSR)' which attracts lots of attention recent years in terms of corporate sustainable development, results of examination regarding commitment structure of corporate chief executive and corporate risk management framework, which are considered to be efficient for the development of nuclear security culture, will be reported. (author)

KBS-3H - Development of the horizontal disposal concept

International Nuclear Information System (INIS)

Thurner, Eric; Pettersson, Stig; Snellman, Margit; Autio, Jorma

2006-01-01

SKB and Posiva are performing an R and D programme over the period of 2002-2007 with the overall aim to find out whether the KBS-3H concept can be regarded as an alternative to the KBS-3V concept for disposal of spent nuclear fuel. A feasibility study of the KBS-3H concept was carried out in 2002, followed by the setting up of basic design in 2003, and since 2004 the demonstration phase is ongoing, ending with the evaluation of the potencial of the concept in 2007. In order to find out whether the concept can be regarded as a viable alternative to the KBS-3V concept demonstration and design work involve development of excavation technology of the drift, detailed studies on the function of the buffer bentonite, deposition equipment and methods for construction of low-pH shotcrete plugs. The investigations related to long-term safety are based on difference analyses between KBS-3V and KBS-3H and focus on KBS-3H specific processes. By the end of 2007 the KBS-3H concept will be reported including a preliminary safety case of the concept with Olkiluoto in Finland as a reference site. (author)

Concept-oriented research and development in information technology

CERN Document Server

Mori, Kinji

2014-01-01

This book thoroughly analyzes the relationships between concept, technology, and market-which are the main factors in shifting information technology research and development (R&D) to a new approach. It discusses unconventional methods and viewpoints of concept creation, technology innovation, and market cultivation. Featuring contributions from international experts and case studies from IBM and Hitachi, this book is perfect for graduate students in information technology, engineering, technology management, operation research, and business-as well as for R&D researchers, directors, strategis

The status of the technical development for the Yamanashi Maglev test line

Energy Technology Data Exchange (ETDEWEB)

Nakashima, Hiroshi [Maglev Systems Development Dept., Railway Technical Research Inst., Tokyo (Japan); Seki, Akio [Linear Express Research Development Div., Central Japan Railway Co. Ltd., Tokyo (Japan)

1996-12-31

The superconducting maglev system has been under development for the past 25 years in Japan. In last 17 years, running test on the 7 km Miyazaki test track has yielded important data for the maglev system development. In 1990, the maglev system gained the status of one of the national - funded projects in Japan. The government authorized the 42.8 km test line in Yamanashi Prefecture and R and D entered into a new phase. This new test line is planned to go through near Tokyo on the supposed Chuo line, which is expected to be a new important line connecting Tokyo and Osaka, the central part of Japan. This fact clearly explains the role of Yamanashi test line in the future. The construction of the Yamanashi test line is energetically promoted, to start running tests in spring of 1997. The situation of the technical development of the Yamanashi test line is reviewed here. (orig.)

Project development and commercialization of on-line analysis systems

International Nuclear Information System (INIS)

Watt, J.S.

1997-01-01

A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems are licensed to Australian companies, Amdel Ltd and Mineral Control Instrumentation Ltd. Both systems are used by industry worldwide, and are the market leaders for radioisotope gauges in their application field. The third system, the multiphase flow meter, was licensed in 1997 to Kvaerner FSSL Ltd of Aberdeen. This meter has even greater potential than the other two systems for economic benefit from its used and for numbers of installations. The on-line analysis systems have been developed to increase the productivity of the Australian mineral and energy industries, and to provide economic benefit to Australia. The economic benefit sought is predominantly improved process control based on use of the instrument, rather than from its sale. Sales of instruments are significant, however, with about A$80 million from the analysis systems and their derivatives since the 1970s. Some of the issues associated with the development of the on-line analysis system are outlined

On-line monitoring for calibration reduction

International Nuclear Information System (INIS)

Hoffmann, M.

2005-09-01

On-Line Monitoring evaluates instrument channel performance by assessing its consistency with other plant indications. Elimination or reduction of unnecessary field calibrations can reduce associated labour costs, reduce personnel radiation exposure, and reduce the potential for calibration errors. On-line calibration monitoring is an important technique to implement a state-based maintenance approach and reduce unnecessary field calibrations. In this report we will look at how the concept is currently applied in the industry and what the arising needs are as it becomes more commonplace. We will also look at the PEANO System, a tool developed by the Halden Project to perform signal validation and on-line calibration monitoring. Some issues will be identified that are being addressed in the further development of these tools to better serve the future needs of the industry in this area. An outline for how to improve these points and which aspects should be taken into account is described in detail. (Author)

Resin Infusion Rigidized Inflatable Concept Development and Demonstration

Data.gov (United States)

National Aeronautics and Space Administration — A novel concept utilizing resin infusion to rigidize inflatable structures was developed at JSC ES. This ICA project intends to complete manufacturing of a prototype...

Implement scientific development concept and promote harmonious development of uranium geology

International Nuclear Information System (INIS)

Ma Fei

2006-01-01

The paper expounds the tasks of uranium geology research and prospecting during the period of '11th Five-Year Plan' from four aspects and the facing situation of uranium geology by using scientific development concept, as well as puts forward the measures how to achieve the middle-long-term development goal for nuclear industry, meanwhile the author has pointed out the direction and focuses for the development of uranium geology research in current and coming future. (authors)

Concept Development for Software Health Management

Science.gov (United States)

Riecks, Jung; Storm, Walter; Hollingsworth, Mark

2011-01-01

This report documents the work performed by Lockheed Martin Aeronautics (LM Aero) under NASA contract NNL06AA08B, delivery order NNL07AB06T. The Concept Development for Software Health Management (CDSHM) program was a NASA funded effort sponsored by the Integrated Vehicle Health Management Project, one of the four pillars of the NASA Aviation Safety Program. The CD-SHM program focused on defining a structured approach to software health management (SHM) through the development of a comprehensive failure taxonomy that is used to characterize the fundamental failure modes of safety-critical software.

Development and Implementation of an Electric Circuits On-Line Course

Directory of Open Access Journals (Sweden)

Ahmed Hussain

2009-02-01

Full Text Available An electric circuit on-line course has been developed at KFUPM to support student centered learning. The course has been used in the first stage to supplement the class room face-to-face instruction. This paper describes the development stages of the on-line course and highlights its fundamental features that are not available in the traditional methods of instruction. The paper also includes the results of a survey conducted among students who have utilized the on-line material to supplement their traditional study of the electric circuits’ course. The results of the survey showed a general satisfaction with the course content and the instructional effectiveness.

DEVELOPING A STRATEGY CONCEPT ON MICRO LEVELS

Directory of Open Access Journals (Sweden)

S. P. Burlankov

2014-01-01

Full Text Available Relevance of the topic of the study is that the conflicting tendencies of economic development, the need to consider a variety of factors internal and external environment in a changing operating environment in the paramount problem of providing concept enterprises as concept distributed in time. Variety of factors that influence the activity of enterprises, the ambiguity estimates of their effect, often lack the possibility of their accounting and forecasting, the complication of the problem to identify the interdependence of external and internal parameters of management lead to serious negative consequences, and often to the destruction of production and the economic system. This raises the need to develop new approaches and management techniques the intra interaction, based on the use of tools of market relations and the transformation of the elements of the market at the enterprise level. Insufficiently complete theoretical study concept issues, lack of models, diagrams, algorithms for the formation mechanism of industrial relations on the principles of intra-enterprise, ensuring longevity economic enterprises by integrating and mobilizing intra-building, deter-mined the choice of the research topic. Strategy - an integrated model of action designed to achieve the objectives of the enterprise. Content of the strategy is a set of decision rules used to determine the main directions of activity. In the literature on strategic planning, there are two opposing views on the understanding of the strategy. In the first case the strategy - it is a concrete long-term plan to achieve a certain goal, and develop a strategy - it is the process of finding a purpose and making long-term plan. This approach is based on the fact that all the emerging changes are predictable, occur-ring in the environment of the processes are deterministic and amenable to complete control and management. At the same time, both within the organization and outside it there

Concept of development of integrated computer - based control system for 'Ukryttia' object

International Nuclear Information System (INIS)

Buyal'skij, V.M.; Maslov, V.P.

2003-01-01

The structural concept of Chernobyl NPP 'Ukryttia' Object's integrated computer - based control system development is presented on the basis of general concept of integrated Computer - based Control System (CCS) design process for organizing and technical management subjects.The concept is aimed at state-of-the-art architectural design technique application and allows using modern computer-aided facilities for functional model,information (logical and physical) models development,as well as for system object model under design

Material development for waste to energy plants. Overlay welding and refractory linings. Final report

Energy Technology Data Exchange (ETDEWEB)

Noergaard Hansson, A.

2011-02-15

Waste is an extremely corrosive fuel. In order to recover a higher percentage of the energy in waste, waste incineration plants have developed from purely heat producing units to heat and power producing units. The change in concept results in higher material temperatures and thereby faster material degradation. As a result material failures have been observed in many waste incineration plants. The purpose of this project was to develop materials with higher resistance to the corrosive elements, in order to reduce the cost of maintenance, increase the availability, and increase the efficiency. The focus is on overlay welding and refractory linings. Inconel 625, alloy 50, alloy 686, and Super 625 offer equivalent corrosion protection at panel walls. 100% overlay performs better than 50% overlay. The corrosion morphology changes with increasing temperature from pitting and general corrosion to pitting and selective corrosion (dendritic core or grain boundaries). The previously observed detrimental effect of Fe on the corrosion resistance was not confirmed. It probably depends on factors such as microstructure of the alloy and local metal temperature. Ni-overlay also reduces the corrosion rates on superheater tubes. However, the superheater environment is less aggressive than the water wall environment. Failure of refractory linings is linked to excess porosity, detrimental reactions between raw materials and other mix constituents, volume growth reactions between base material and salt depositions, and thermal stress induced crack formation. Free water and not decomposition of hydrates causes spalling and cracking during the initial heating of refractory linings. Finite Element analysis confirms the stress levels between steel and refractory with the higher stress level at the top of the panel wall tube. A number of LCC mixes were formulated, adjusted and tested. Mixes with low open porosities ({approx} 10%) and state of the art resistance to KCl were achieved. (LN)

Development of the Statistical Reasoning in Biology Concept Inventory (SRBCI)

Science.gov (United States)

Deane, Thomas; Nomme, Kathy; Jeffery, Erica; Pollock, Carol; Birol, Gülnur

2016-01-01

We followed established best practices in concept inventory design and developed a 12-item inventory to assess student ability in statistical reasoning in biology (Statistical Reasoning in Biology Concept Inventory [SRBCI]). It is important to assess student thinking in this conceptual area, because it is a fundamental requirement of being…

Developing an instrument for assessing students' concepts of the nature of technology

Science.gov (United States)

Liou, Pey-Yan

2015-05-01

Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable

A theoretical concept for a thermal-hydraulic 3D parallel channel core model

International Nuclear Information System (INIS)

Hoeld, A.

2004-01-01

A detailed description of the theoretical concept of the 3D thermal-hydraulic single- and two-phase flow phenomena is presented. The theoretical concept is based on important development lines such as separate treatment of the mass and energy from the momentum balance eqs. The other line is the establishment of a procedure for the calculation of the mass flow distributions into different parallel channels based on the fact that the sum of pressure decrease terms over a closed loop must stay, despite of un-symmetric perturbations, zero. The concept is realized in the experimental code HERO-X3D, concentrating in a first step on an artificial BWR or PWR core which may consist of a central channel, four quadrants, and a bypass channel. (authors)

Concept development of a tendon arm manipulator and anthropomorphic robotic hand

Science.gov (United States)

Tolman, C. T.

1987-01-01

AMETEK/ORED inhouse research and development efforts leading toward a next-generation robotic manipulator arm and end-effector technology is summarized. Manipulator arm development has been directed toward a multiple-degree-of-freedom, flexible, tendon-driven concept referred to here as a Tendon Arm Manipulator (TAM). End-effector development has been directed toward a three-fingered, dextrous, tendon-driven, anthropomorphic configuration which is referred to as an Anthropomorphic Robotic Hand (ARH). Key technology issues are identified for both concepts.

Development of a master model concept for DEMO vacuum vessel

International Nuclear Information System (INIS)

Mozzillo, Rocco; Marzullo, Domenico; Tarallo, Andrea; Bachmann, Christian; Di Gironimo, Giuseppe

2016-01-01

Highlights: • The present work concerns the development of a first master concept model for DEMO vacuum vessel. • A parametric-associative CAD master model concept of a DEMO VV sector has been developed in accordance with DEMO design guidelines. • A proper CAD design methodology has been implemented in view of the later FEM analyses based on “shell elements”. - Abstract: This paper describes the development of a master model concept of the DEMO vacuum vessel (VV) conducted within the framework of the EUROfusion Consortium. Starting from the VV space envelope defined in the DEMO baseline design 2014, the layout of the VV structure was preliminarily defined according to the design criteria provided in RCC-MRx. A surface modelling technique was adopted and efficiently linked to the finite element (FE) code to simplify future FE analyses. In view of possible changes to shape and structure during the conceptual design activities, a parametric design approach allows incorporating modifications to the model efficiently.

Development of a master model concept for DEMO vacuum vessel

Energy Technology Data Exchange (ETDEWEB)

Mozzillo, Rocco; Marzullo, Domenico; Tarallo, Andrea [CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples (Italy); Bachmann, Christian [EUROfusion PMU, Boltzmannstraße 2, 85748 Garching (Germany); Di Gironimo, Giuseppe, E-mail: peppe.digironimo@gmail.com [CREATE, University of Naples Federico II, DII, P.le Tecchio 80, 80125, Naples (Italy)

2016-11-15

Highlights: • The present work concerns the development of a first master concept model for DEMO vacuum vessel. • A parametric-associative CAD master model concept of a DEMO VV sector has been developed in accordance with DEMO design guidelines. • A proper CAD design methodology has been implemented in view of the later FEM analyses based on “shell elements”. - Abstract: This paper describes the development of a master model concept of the DEMO vacuum vessel (VV) conducted within the framework of the EUROfusion Consortium. Starting from the VV space envelope defined in the DEMO baseline design 2014, the layout of the VV structure was preliminarily defined according to the design criteria provided in RCC-MRx. A surface modelling technique was adopted and efficiently linked to the finite element (FE) code to simplify future FE analyses. In view of possible changes to shape and structure during the conceptual design activities, a parametric design approach allows incorporating modifications to the model efficiently.

Intervention Programmes for Developing Positive Self-Concepts in Hospitalized Children.

Science.gov (United States)

Lizasoain, Olga; Polaino, Aquilino

1993-01-01

Describes a program implemented in Navarra, Spain, to prepare children for hospitalization and to provide psychopedagogical follow-up to develop positive self-concepts. Describes the effects of the program on 40 hospitalized children between the ages of 8 and 12, reporting a more positive self-concept among the children who received the…

Microsystem Cooler Concept Developed and Being Fabricated

Science.gov (United States)

Moran, Matthew E.

2005-01-01

A patented microsystem cooler concept has been developed by the NASA Glenn Research Center. It incorporates diaphragm actuators to produce the Stirling refrigeration cycle within a planar configuration compatible with the thermal management of electronics, sensors, optical and radiofrequency systems, microarrays, and other microsystems. The microsystem cooler is most suited to volume-limited applications that require cooling below the ambient or sink temperature. Johns Hopkins University Applied Physics Laboratory is conducting development testing and fabrication of a prototype under a grant from Glenn.

The hybrid reactor project based on the straight field line mirror concept

International Nuclear Information System (INIS)

Ågren, O.; Noack, K.; Moiseenko, V. E.; Hagnestål, A.; Källne, J.; Anglart, H.

2012-01-01

The straight field line mirror (SFLM) concept is aiming towards a steady-state compact fusion neutron source. Besides the possibility for steady state operation for a year or more, the geometry is chosen to avoid high loads on materials and plasma facing components. A comparatively small fusion hybrid device with “semi-poor” plasma confinement (with a low fusion Q factor) may be developed for industrial transmutation and energy production from spent nuclear fuel. This opportunity arises from a large fission to fusion energy multiplication ratio, Q r = P fis /P fus >>1. The upper bound on Q r is primarily determined by geometry and reactor safety. For the SFLM, the upper bound is Q r ≈150, corresponding to a neutron multiplicity of k eff =0.97. Power production in a mirror hybrid is predicted for a substantially lower electron temperature than the requirement T e ≈10 keV for a fusion reactor. Power production in the SFLM seems possible with Q≈0.15, which is 10 times lower than typically anticipated for hybrids (and 100 times smaller than required for a fusion reactor). This relaxes plasma confinement demands, and broadens the range for use of plasmas with supra-thermal ions in hybrid reactors. The SFLM concept is based on a mirror machine stabilized by qudrupolar magnetic fields and large expander tanks beyond the confinement region. The purpose of the expander tanks is to distribute axial plasma loss flow over a sufficiently large area so that the receiving plates can withstand the heat. Plasma stability is not relying on a plasma flow into the expander regions. With a suppressed plasma flow into the expander tanks, a possibility arise for higher electron temperature. A brief presentation will be given on basic theory for the SFLM with plasma stability and electron temperature issues, RF heating computations with sloshing ion formation, neutron transport computations with reactor safety margins and material load estimates, magnetic coil designs as well as

SEADYN Analysis of a Tow Line for a High Altitude Towed Glider

Science.gov (United States)

Colozza, Anthony J.

1996-01-01

The concept of using a system, consisting of a tow aircraft, glider and tow line, which would enable subsonic flight at altitudes above 24 km (78 kft) has previously been investigated. The preliminary results from these studies seem encouraging. Under certain conditions these studies indicate the concept is feasible. However, the previous studies did not accurately take into account the forces acting on the tow line. Therefore in order to investigate the concept further a more detailed analysis was needed. The code that was selected was the SEADYN cable dynamics computer program which was developed at the Naval Facilities Engineering Service Center. The program is a finite element based structural analysis code that was developed over a period of 10 years. The results have been validated by the Navy in both laboratory and at actual sea conditions. This code was used to simulate arbitrarily-configured cable structures subjected to excitations encountered in real-world operations. The Navy's interest was mainly for modeling underwater tow lines, however the code is also usable for tow lines in air when the change in fluid properties is taken into account. For underwater applications the fluid properties are basically constant over the length of the tow line. For the tow aircraft/glider application the change in fluid properties is considerable along the length of the tow line. Therefore the code had to be modified in order to take into account the variation in atmospheric properties that would be encountered in this application. This modification consisted of adding a variable density to the fluid based on the altitude of the node being calculated. This change in the way the code handled the fluid density had no effect on the method of calculation or any other factor related to the codes validation.

Evolution of the concept of sustainable development

International Nuclear Information System (INIS)

Carrizosa Umana, Julio

2000-01-01

Topics like the sustainable development are analyzed before the years eighty; main models and criticize current. In her it is to synthesize the process of theoretical construction of the concept, making emphasis in the relativity of the development idea, in the relationship of the sustainability with the justness, and in their vision of the future. The neo liberal pattern of D.S is presented and the variations introduced by the World Bank as well as the proposals of construction of a model of community DS

Developing the Concept for New Customer Acquisition for an R&D Organization

OpenAIRE

Hartikainen, Timo

2015-01-01

This Master’s Thesis focuses on developing a holistic, new customer acquisition concept for a research and development organization. The developed concept considers and contains all key aspects of the customer acquisition. It starts from attracting prospective companies via value offering and brand development, suggested by the Customer Equity Framework (CEF), and includes managing the customer base via Key Account Management (KAM) program in order to find and segregate the customers with the...

[Mass casualty incidents - current concepts and developments].

Science.gov (United States)

Savinsky, Godo; Stuhr, Markus; Kappus, Stefan; Trümpler, Stefan; Wenderoth, Stephan; Wohlers, Jan-Hauke; Paschen, Hans-Richard; Kerner, Thoralf

2014-12-01

Medical concepts and strategies are permanently changing. Due to the emergency response in a mass casualty incident everyone who is involved has to work together with different organisations and public authorities, which are not part of the regular emergency medical service. Within the last 25 years throughout the whole country of Germany the role of a "chief emergency physician" has been implemented and in preparation for the FIFA World Cup 2006 mobile treatment units were set up. In 2007, special units of the "Medical Task Force" - funded by the german state - were introduced and have been established by now. They will be a permanent part of regional plannings for mass casualty incidents. This article highlights current concepts and developments in different parts of Germany. © Georg Thieme Verlag Stuttgart · New York.

Development of automobile brake lining using pulverized cow hooves

Directory of Open Access Journals (Sweden)

Katsina C. BALA

2016-06-01

Full Text Available Asbestos has been used for so long as automobile brake lining material because of its good physical and chemical properties. However, due to the health hazard associated with its handling, it has lost favour and several alternative materials are being increasingly used. Asbestos-free brake lining was developed in this work using pulverized cow hooves along with epoxy resin, barium sulphate, graphite and aluminium oxide. This was with a view to exploiting the characteristics of cow hooves, which are largely discarded as waste materials to replace asbestos which has been found to be carcinogenic. Samples of brake linings were produced using compressive moulding in which the physical and mechanical properties of the samples were studied. The results obtained showed that proper bonding was achieved as the percentage by weight of epoxy resin increased and percentage by weight of pulverized cow hooves decreased. The hardness, compressive strength, coefficient of friction, water and oil absorption, relative density and wear rate of the brake linings were determined and compared with existing brake lining properties. The result indicates that pulverized cow hooves can be used as brake lining material for automobiles.

Comprehensive change management concepts. Development of a participatory approach.

Science.gov (United States)

Zink, Klaus J; Steimle, Ulrich; Schröder, Delia

2008-07-01

During the last years, many change projects in organizations did not have the planned success. Therefore at first, the causes for these failures and the success factors contributing to organizational change have to be discussed. To get better results, a comprehensive change management concept has been developed and tested in an ongoing research project. By using concepts for an integrated assessment and design of organizations, an approach for analyzing the current situation has been elaborated to identify "lack of integration" in the change initiatives of a company. To realize an integrated overall approach of modernization by harmonizing different methods and concepts, first, one has to prove their relationship to policy and strategy (vertical harmonization). The second step is to take into account the fact that there has to be a logical fit between the single concepts (horizontal harmonization). But even if all elements are logically coherent, that does not mean that the people working in the company also see this coherence. Therefore, in addition to the "logical fit", one has to examine the "psychological fit". In the end, a concept for analyzing the status quo in an organization as a result of "objective data" and "subjective data" originated. Subsequently, instruments for harmonizing different modernizing concepts have been applied. As part of the comprehensive change management concept participatory ergonomic approaches have been used during the project. The present study shows this approach in the case of one company.

Towards Product Lining Model-Driven Development Code Generators

OpenAIRE

Roth, Alexander; Rumpe, Bernhard

2015-01-01

A code generator systematically transforms compact models to detailed code. Today, code generation is regarded as an integral part of model-driven development (MDD). Despite its relevance, the development of code generators is an inherently complex task and common methodologies and architectures are lacking. Additionally, reuse and extension of existing code generators only exist on individual parts. A systematic development and reuse based on a code generator product line is still in its inf...

On-line methanol sensor system development for recombinant ...

African Journals Online (AJOL)

On-line methanol sensor system development for recombinant human serum ... of the methanol sensor system was done in a medium environment with yeast cells ... induction at a low temperature and a pH where protease does not function.

Developing the concept of caring in nursing education.

Science.gov (United States)

Salehian, Maryam; Heydari, Abbas; Moonaghi, Hossein Karimi; Aghebati, Nahid

2017-05-01

Caring is a value-based concept in the nursing field and in education. Exact understanding of caring in education and developing this concept in nursing will result in the evolution of the position of nursing science and profession. The aim of this study was to attempt to develop the concept of caring in nursing education. This qualitative study was conducted in 2016 using directed content analysis. Participants were thirteen subjects (6 instructors and 7 senior and junior nursing students) who were selected using purposeful sampling method. Research environment was the Faculty of Nursing and Midwifery in Mashhad. Data collection method was semi-structured interviews for thirty to ninety minutes and sampling continued until data saturation. Interviews were conducted in Persian language and they were immediately transcribed and analyzed using MAXDA10 software. The text of interviews was reviewed several times. First, open codes were extracted, and after several reviews based on similarity in meaning, they were classified into subcategories and finally, similar subcategories were placed in main classes based on meaning. Results of this study led to the identification of four themes: 1, ethical and religious commitment, 2, development of knowing and cultural sensitivity, 3, soft assertion, 4, clear describing of objectives, expectations, and educational rules for students. Results of this study showed that the cultural and religious background of instructors affects their interaction with students. Instructors' commitment and compliance to values in interacting with students and other educational colleagues has an origin beyond ethical and human subjects and it is originated from their religious education and training.

Development of a plug-in for Variability Modeling in Software Product Lines

Directory of Open Access Journals (Sweden)

María Lucía López-Araujo

2012-03-01

Full Text Available Las Líneas de Productos de Software (LPS toman ventaja económica de las similitudes y variación entre un conjunto de sistemas de software dentro de un dominio específico. La Ingeniería de Líneas de Productos de Software por lo tanto, define una serie de procesos para el desarrollo de LPS que consideran las similitudes y variación a lo largo del ciclo devida. El modelado de variabilidad, en consecuencia, es una actividad esencial en un enfoque de Ingeniería de Líneas de Productos de Software. Existen varias técnicas para modelado de variabilidad. Entre ellas resalta COVAMOF que permite modelar los puntos de variación, variantes y dependencias como entidades de primera clase, proporcionando una manera uniforme de representarlos en los diversos niveles de abstracción de una LPS. Para poder aprovechar los beneficios de COVAMOF es necesario contar con una herramienta, de otra manera el modelado y la administración de la variabilidad pueden resultar una labor ardua para el ingeniero de software. Este trabajo presenta el desarrollo de un plug-in de COVAMOF para Eclipse.Software Product Lines (SPL take economic advantage of commonality and variability among a set of software systems that exist within a specific domain. Therefore, Software Product Line Engineering defines a series of processes for the development of a SPL that consider commonality and variability during the software life cycle. Variability modeling is therefore an essential activity in a Software Product Line Engineering approach. There are several techniques for variability modeling nowadays. COVAMOF stands out among them since it allows the modeling of variation points, variants and dependencies as first class elements. COVAMOF, therefore, provides an uniform manner for representing such concepts in different levels of abstraction within a SPL. In order to take advantage of COVAMOF benefits, it is necessary to have a computer aided tool, otherwise variability modeling and

The Role of Design Concepts in the Development of Industrial Services

DEFF Research Database (Denmark)

Pekkala, Janne; Ylirisku, Salu

2017-01-01

B-to-B industrial manufacturing organisations are moving focus from designing products to services. This transition challenges the management of innovating, which is increasingly collaborative and networked. Organisations need to be able to tackle the related uncertainty in order to prepare, secure......, and plan their use of resources. Design concepts are known to have various beneficial roles in product and service development in various development contexts. In this article we study how design concepts were utilised within, and between, three development projects in a Finnish company in the context of B...

Development of concept-based physiology lessons for biomedical engineering undergraduate students.

Science.gov (United States)

Nelson, Regina K; Chesler, Naomi C; Strang, Kevin T

2013-06-01

Physiology is a core requirement in the undergraduate biomedical engineering curriculum. In one or two introductory physiology courses, engineering students must learn physiology sufficiently to support learning in their subsequent engineering courses and careers. As preparation for future learning, physiology instruction centered on concepts may help engineering students to further develop their physiology and biomedical engineering knowledge. Following the Backward Design instructional model, a series of seven concept-based lessons was developed for undergraduate engineering students. These online lessons were created as prerequisite physiology training to prepare students to engage in a collaborative engineering challenge activity. This work is presented as an example of how to convert standard, organ system-based physiology content into concept-based content lessons.

Calling line managers in employee continuous professional development in South East Asia

Directory of Open Access Journals (Sweden)

Anubama Ramachandra

2011-11-01

Full Text Available Purpose: The paper aims to study the relationship of Line Managers’ (LMs Human Resource (HR role and its facets within employee’s Continuous Professional Development (CPD.Design/methodology/approach: A quantitative approach using 100 questionnaires were distributed to line managers in a South East Asia with a response rate of 87%.Findings: Results depict that LMs are actively involved in Strategic Partner, Employee Champion, and Change Agent roles. Study also shows that these three HR roles correlate with employee CPD. LMs’ are neither involved in Administrative Expert role, nor it correlates with employee Continuous Professional Development.Research limitations: Inability of the line managers to be fully involved with the four HR roles constraints the process of line manager deployment of HR roles specifically to employee CPD.Practical implications: Argues that the importance of strategic partner, employee champion, and change agent roles are the most important barrier and enabler of employee CPD, thus indirectly promoting organizational success and productivity.Social implications: Highlights the difficulties of managing organisations by getting the line managers directly involve in the development of employee CPD. Many line managers have to be made and given opportunities to develop their capabilities on this platform. Contends that HR can help an organization to succeed, provided that all line managers understand their roles, work together and take responsibility for their contribution. In addition is the adoption of the HR roles for the smooth delivery of HR functions which aligns with the overall organizational success.Originality/value: Specific HR roles are significant importance to the development of employee CPD within the setting of this South East Asian organization.

EBS modelling for the development of repository concepts tailored to siting environments

International Nuclear Information System (INIS)

Ishiguro, K.; Ueda, H.; Wakasugi, K.; Sakabe, Y.; Kitayama, K.; Umeki, H.; Takase, H.

2007-01-01

The Japanese siting approach for a HLW repository calls for volunteer host municipalities and thereby places particular emphasis on design flexibility. In particular, the repository concept needs to be tailored to the specific site characteristics. Starting from the H12 repository concept, NUMO has been examining a range of possible repository design options, including the EBS. In this paper. the requirements and strategy for the development of models for performance assessment and process understanding are discussed, taking into account the step-wise, iterative process of developing repository concepts. The areas requiring further development of models and databases in the long-term R and D programme have been identified as a 'wish list' that relates to the evaluation of a range of potential repository concepts, focusing on the near-field for the early stages of the development process. Among the issues on the list, NUMO has started the development of a flexible computer code for modelling three-dimensional mass transport to evaluate the impacts of various design options and components of the EBS. This tool has been applied to the analysis of the barrier effects of the tunnel plugs located in fractured rock. (authors)

On-Line GIS Analysis and Image Processing for Geoportal Kielce/poland Development

Science.gov (United States)

Hejmanowska, B.; Głowienka, E.; Florek-Paszkowski, R.

2016-06-01

GIS databases are widely available on the Internet, but mainly for visualization with limited functionality; very simple queries are possible i.e. attribute query, coordinate readout, line and area measurements or pathfinder. A little more complex analysis (i.e. buffering or intersection) are rare offered. Paper aims at the concept of Geoportal functionality development in the field of GIS analysis. Multi-Criteria Evaluation (MCE) is planned to be implemented in web application. OGC Service is used for data acquisition from the server and results visualization. Advanced GIS analysis is planned in PostGIS and Python programming. In the paper an example of MCE analysis basing on Geoportal Kielce is presented. Other field where Geoportal can be developed is implementation of processing new available satellite images free of charge (Sentinel-2, Landsat 8, ASTER, WV-2). Now we are witnessing a revolution in access to the satellite imagery without charge. This should result in an increase of interest in the use of these data in various fields by a larger number of users, not necessarily specialists in remote sensing. Therefore, it seems reasonable to expand the functionality of Internet's tools for data processing by non-specialists, by automating data collection and prepared predefined analysis.

ON-LINE GIS ANALYSIS AND IMAGE PROCESSING FOR GEOPORTAL KIELCE/POLAND DEVELOPMENT

Directory of Open Access Journals (Sweden)

B. Hejmanowska

2016-06-01

Full Text Available GIS databases are widely available on the Internet, but mainly for visualization with limited functionality; very simple queries are possible i.e. attribute query, coordinate readout, line and area measurements or pathfinder. A little more complex analysis (i.e. buffering or intersection are rare offered. Paper aims at the concept of Geoportal functionality development in the field of GIS analysis. Multi-Criteria Evaluation (MCE is planned to be implemented in web application. OGC Service is used for data acquisition from the server and results visualization. Advanced GIS analysis is planned in PostGIS and Python programming. In the paper an example of MCE analysis basing on Geoportal Kielce is presented. Other field where Geoportal can be developed is implementation of processing new available satellite images free of charge (Sentinel-2, Landsat 8, ASTER, WV-2. Now we are witnessing a revolution in access to the satellite imagery without charge. This should result in an increase of interest in the use of these data in various fields by a larger number of users, not necessarily specialists in remote sensing. Therefore, it seems reasonable to expand the functionality of Internet's tools for data processing by non-specialists, by automating data collection and prepared predefined analysis.

Advances in Mammalian Cell Line Development Technologies for Recombinant Protein Production

Directory of Open Access Journals (Sweden)

Say Kong Ng

2013-04-01

Full Text Available From 2006 to 2011, an average of 15 novel recombinant protein therapeutics have been approved by US Food and Drug Administration (FDA annually. In addition, the expiration of blockbuster biologics has also spurred the emergence of biosimilars. The increasing numbers of innovator biologic products and biosimilars have thus fuelled the demand of production cell lines with high productivity. Currently, mammalian cell line development technologies used by most biopharmaceutical companies are based on either the methotrexate (MTX amplification technology or the glutamine synthetase (GS system. With both systems, the cell clones obtained are highly heterogeneous, as a result of random genome integration by the gene of interest and the gene amplification process. Consequently, large numbers of cell clones have to be screened to identify rare stable high producer cell clones. As such, the cell line development process typically requires 6 to 12 months and is a time, capital and labour intensive process. This article reviews established advances in protein expression and clone screening which are the core technologies in mammalian cell line development. Advancements in these component technologies are vital to improve the speed and efficiency of generating robust and highly productive cell line for large scale production of protein therapeutics.

Development of out-of-core concepts for a supercritical-water, pressure-tube reactor

International Nuclear Information System (INIS)

Diamond, W.T.

2010-01-01

One of the Generation IV programs at Chalk River Laboratories has as its prime focus the development of out-of-core concepts for the SuperCritical Water (SCW) pressure tube reactor under development in Canada. A number of technical issues associated with the interface of out-of-core components and the pressure tubes of a SCW pressure tube reactor are being investigated. This article focuses on several aspects of out-of-core components and layouts, building upon concepts that have been developed during the past few years. The efforts are strongly focused on concepts for a fuel channel that can be fabricated with the tight lattice pitch (typically 230 to 250 mm) that may be required for some applications such as utilization of a thorium fuel cycle. It is not practical to adapt concepts with a tight lattice pitch while using the thicker materials required for the higher temperatures and pressures required for supercritical operation. A change in lattice pitch or configuration is required to accommodate the component size increases. This presentation will cover a number of new concepts developed to produce feeders and end fittings for the harsh conditions of a SCW pressure tube reactor. These components are then developed into conceptual models of a Gen IV pressure tube reactor mounted in both horizontal and vertical orientations. Full 3-D solid models of both concepts will be demonstrated as well as a 1/10th-scale model of one face of a horizontal concept that has been built from components made with a 3-D printer. (author)

Modeling Energy and Development : An Evaluation of Models and Concepts

NARCIS (Netherlands)

Ruijven, Bas van; Urban, Frauke; Benders, René M.J.; Moll, Henri C.; Sluijs, Jeroen P. van der; Vries, Bert de; Vuuren, Detlef P. van

2008-01-01

Most global energy models are developed by institutes from developed countries focusing primarily oil issues that are important in industrialized countries. Evaluation of the results for Asia of the IPCC/SRES models shows that broad concepts of energy and development. the energy ladder and the

Progress in developing the concept for the irradiation research facility

International Nuclear Information System (INIS)

Lee, A.G.; Bishop, W.E.; Gillespie, G.E.; Zeng, Y.

1996-04-01

At the 16th annual Canadian Nuclear Society conference, AECL presented the case for replacing the NRU reactor with an Irradiation Research Facility (IRF) to test CANDU fuels and materials and to perform advanced materials research using neutrons. AECL developed a cost estimate of $500 million for the reference IRF concept, and estimated that it would require 87 months to complete. AECL has initiated a pre-project program to develop the IRF concept and to minimize uncertainties related to feasibility and licensability, and to examine options for reducing the overall project cost before project implementation begins. (author) 10 refs., 2 figs

Developing Conceptions of Authority and Contract across the Lifespan: Two Perspectives.

Science.gov (United States)

Dawson, Theo L.; Gabrielian, Sonya

2003-01-01

Compares concepts defining Kohlbergian stages of moral development with those associated with orders of hierarchical complexity determined with a generalized content-independent stage-scoring system. Finds that Kohlberg's sequence generally matches that identified with the scoring system and that contract and authority concepts match the concepts…

Development of the Enzyme-Substrate Interactions Concept Inventory

Science.gov (United States)

Bretz, Stacey Lowery; Linenberger, Kimberly J.

2012-01-01

Enzyme function is central to student understanding of multiple topics within the biochemistry curriculum. In particular, students must understand how enzymes and substrates interact with one another. This manuscript describes the development of a 15-item Enzyme-Substrate Interactions Concept Inventory (ESICI) that measures student understanding…

Integrative Literature Review: Concept Mapping--A Strategy to Support the Development of Practice, Research, and Theory within Human Resource Development

Science.gov (United States)

Daley, Barbara J.; Conceicao, Simone C. O.; Mina, Liliana; Altman, Brian A.; Baldor, Maria; Brown, James

2010-01-01

The purpose of this integrative literature review is to summarize research on concept mapping and to offer ideas on how concept mapping can facilitate practice, research, and theory development within human resource development. In this review, more than 300 articles, written in both English and Spanish, presented at two different concept mapping…

Conceptual design and development of a superconducting bus-line for the Large Helical Device

International Nuclear Information System (INIS)

Mito, T.; Takahata, K.; Yamada, S.; Yamamoto, J.; Uede, T.; Ikeda, M.

1993-01-01

A superconducting bus-line is proposed and preliminarily tested as an electrical feeder between the superconducting coils of the Large Helical Device (LHD) and their electrical power supply. The bus-line consists of a superconductor and its cryogenic transfer-line. The superconductor is a specially developed aluminum stabilized NbTi wire, which is installed in the innermost channel of the transfer-line. The vacuum insulated transfer-line consists of four corrugated tubes assembled coaxially. Liquid helium flows through the innermost channel and shield gas flows through another annular channel in the line. We are completing the conceptual design of the bus-line and the installation plan for the LHD experimental hall and are carrying out development of wires, including an investigation of their mechanical properties and electrical insulation. This report describes the conceptual design of the superconducting bus-line for the LHD, and the results we obtained recently during the design and development of a full-scale demonstration facility. (orig.)

Developing the Concept of Metalearning

Science.gov (United States)

Jackson, Norman

2004-01-01

The idea of metalearning was originally used by John Biggs (1985) to describe the state of 'being aware of and taking control of one's own learning'. This paper explores the concept through collaborative enquiry involving researchers and higher education teachers. An evolved conception is proposed in which metalearning is a subconcept within…

Concept-Mapping Tools and the Development of Students' Critical-Thinking Skills

Science.gov (United States)

Tseng, Sheng-Shiang

2015-01-01

Developing students' critical-thinking skills has recently received attention at all levels of education. This article proposes the use of concept-mapping tools to improve students' critical-thinking skills. The article introduces a Web-based concept-mapping tool--Popplet--and demonstrates its application for teaching critical-thinking skills in…

Advanced concepts for acceleration

International Nuclear Information System (INIS)

Keefe, D.

1986-07-01

Selected examples of advanced accelerator concepts are reviewed. Such plasma accelerators as plasma beat wave accelerator, plasma wake field accelerator, and plasma grating accelerator are discussed particularly as examples of concepts for accelerating relativistic electrons or positrons. Also covered are the pulsed electron-beam, pulsed laser accelerator, inverse Cherenkov accelerator, inverse free-electron laser, switched radial-line accelerators, and two-beam accelerator. Advanced concepts for ion acceleration discussed include the electron ring accelerator, excitation of waves on intense electron beams, and two-wave combinations

Agile Company Development - Looking for a new concept

DEFF Research Database (Denmark)

Andersen, Jesper Rank; Mikkelsen, Hans; Riis, Jens Ove

2004-01-01

in the managerial hierarchy. They compete for resources and managerial attention and they often take too long time – and some do not survive in the rapid changing context. Top managers ask for speed, flexibility and effectiveness. Can the ideas and principles from Agile and Lean Thinking concepts developed...

Ausubel's understanding of concept development

Directory of Open Access Journals (Sweden)

Janković Aleksandar P.

2015-01-01

Full Text Available This paper presents one of relatively new cognitivistic learning and cognition theories - the theory by American psychologist David Ausubel. We consider this theory to be very usable for teaching beginners or for cognition process. It is of utmost importance that first or elementary concepts concerning natural and social phenomena a pupil aquires need to be accurate, understandable and properly connected in a cause-effect sequence of conceptual systems so that items of knowledge aquired can be stable and usable. For correct understanding of Ausubel's claims concerning processes and procedures involved in the acquisition of elementary concepts, which is central to this investigation, it is necessary to address problems and questions concerning the following: the process of aquisition or construction of first concepts; how to base verbal learning; how is subsuming achieved, that is connecting of new and previously acquired concepts; what is the relation of this theory with other cognitivistic theories of learning, and, finally, what are critical views or evalutions which can make this theory truly productive in relation to teaching.

Towards a coordinated development of numerical CACSD software : the RASP/SLICOT compatibility concept

NARCIS (Netherlands)

Grübel, G.; Varga, A.; Boom, van den A.J.W.; Geurts, A.J.; Mattson, S.E.; Gray, J.O.; Cellier, F.E.

1994-01-01

The concept of mutual compatibility is introduced. It has arisen from the cooperation of the developers of the RASP and SLICOT libraries. With this concept it becomes feasible to coordinate the development of several libraries leading to a reduction of software implementation and testing efforts

An Energy-Saving Concept of the Smart Building Power Grid with Separated Lines for Standby Devices

Directory of Open Access Journals (Sweden)

Dmytro Zubov

2016-09-01

Full Text Available Standby power takes 5-10 % of the residential electricity around the world. Some countries lose more than 14 % of the total electricity used in the residential sector. Hence, a new energysaving concept that could help to decrease the power losses is discussed in this paper. Firstly, the two power lines of infrastructure for continuously connected equipment and for standby devices is proposed for new smart buildings. Secondly, the segmented infrastructure with unified hardwareunits is proposed for existing smart buildings (the new one can apply this principle as well. The contactors (i.e. unified hardware units consist of the NodeMcu Lua ESP8266 WiFi IoTdevelopment board, ACS712T ELC-30A current sensor, and the Songle relay. The automatic mode is based on three steps: measurement of the current using ACS712T ELC-30A sensor in all segments except the root; switching off the relays with the current less than or equal to any number in the historical data; switching off the root contactor if all the descendent relays (i.e. contactors are switched off. Second step represents the linear classification with sliding window in machine learning. The software consists of two parts, low-level Arduino sketches and high-level C# Windows form app. They are connected by MQTT broker Mosquitto. The proposed concept was successfully tested using a prototype with three segments, one of which includes smart lighting. The payback period is of approximately one month and a half for the whole-building switch concept.

Development of Live-working Robot for Power Transmission Lines

Science.gov (United States)

Yan, Yu; Liu, Xiaqing; Ren, Chengxian; Li, Jinliang; Li, Hui

2017-07-01

Dream-I, the first reconfigurable live-working robot for power transmission lines successfully developed in China, has the functions of autonomous walking on lines and accurately positioning. This paper firstly described operation task and object of the robot; then designed a general platform, an insulator replacement end and a drainage plate bolt fastening end of the robot, presented a control system of the robot, and performed simulation analysis on operation plan of the robot; and finally completed electrical field withstand voltage tests in a high voltage hall as well as online test and trial on actual lines. Experimental results show that by replacing ends of manipulators, the robot can fulfill operation tasks of live replacement of suspension insulators and live drainage plate bolt fastening.

Family Concepts in Early Learning and Development Standards

Science.gov (United States)

Walsh, Bridget A.; Sanchez, Claudia; Lee, Angela M.; Casillas, Nicole; Hansen, Caitlynn

2016-01-01

This exploratory study investigated the use of concepts related to families, parents, and the home in 51 state-level early learning and development standards documents. Guidelines from six national family involvement, engagement, and school-partnership models were used to create the Family Involvement Models Analysis Chart (FIMAC), which served as…

SUSTAINABLE BUSINESS COMPETITIVENESS: TRANSLATING CONCEPT INTO PRACTICE

Directory of Open Access Journals (Sweden)

Idqan Fahmi

2012-07-01

Full Text Available Globalization has proven to spur economic growth for many countries in the world. It has, however, also negative impacts in terms of widening income gap, environmental degradation etc. such that many are worried that the growth will not be sustainable. Triple bottom line was introduced to make the economic growth and company competitiveness more sustainable. Although to define the concept is easy, to make it implemented, especially by developing countries, is another matter. Education and research track by universities is suggested to be one best way to accelerate the implementation of the concept. A case of Graduate Program of Management and Business (MB-IPB is used to illustrate the attempt.Keywords: Sustainable Business Competitiveness, Triple Bottom Line, MB-IPB, 3PsABSTRAKGlobalisasi telah terbukti memacu pertumbuhan ekonomi pada berbagai belahan dunia, tetapi juga mempunyai banyak dampak negatif yang dirasakan dalam bentuk melebarnya kesenjangan pendapatan, kerusakan lingkungan dll. Akibatnya banyak khawatir bahwa pertumbuhan ekonomi yang terjadi tidak akan berkelanjutan. Konsep Triple Bottom Line diperkenalkan untuk membuat pertumbuhan ekonomi dan dayasaing perusahaan lebih berkelanjutan. Walaupun konsep ini relatif mudah untuk dijelaskan, menerapkannnya ternyata tidak mudah, terutama di negara berkembang. Jalur pendidikan dan penelitian merupakan salah satu cara terbaik yang dapat dilakukan universitas untuk mempercepat penerapan konsep. Kasus Program Pascasarjana Manajemen dan Bisnis (MB-IPB digunakan untuk mengilustrasikan upaya tersebut.Kata kunci: Dayasaing Bisnis Berkelanjutan, Triple Bottom Line, MB-IPB, 3P

Technology Development and Demonstration Concepts for the Space Elevator

Science.gov (United States)

Smitherman, David V., Jr.

2004-01-01

During the 1990s several discoveries and advances in the development of carbon nano-tube (CNT) materials indicated that material strengths many times greater than common high-strength composite materials might be possible. Progress in the development of this material led to renewed interest in the space elevator concept for construction of a tether structure from the surface of the Earth through a geostationary orbit (GEO) and thus creating a new approach to Earth-to-orbit transportation infrastructures. To investigate this possibility the author, in 1999, managed for NASA a space elevator work:hop at the Marshall Space Flight Center to explore the potential feasibility of space elevators in the 21 century, and to identify the critical technologies and demonstration missions needed to make development of space elevators feasible. Since that time, a NASA Institute for Advanced Concepts (NIAC) funded study of the Space Elevator proposed a concept for a simpler first space elevator system using more near-term technologies. This paper will review some of the latest ideas for space elevator development, the critical technologies required, and some of the ideas proposed for demonstrating the feasibility for full-scale development of an Earth to GEO space elevator. Critical technologies include CNT composite materials, wireless power transmission, orbital object avoidance, and large-scale tether deployment and control systems. Numerous paths for technology demonstrations have been proposed utilizing ground experiments, air structures. LEO missions, the space shuttle, the international Space Station, GEO demonstration missions, demonstrations at the lunar L1 or L2 points, and other locations. In conclusion, this paper finds that the most critical technologies for an Earth to GEO space elevator include CNT composite materials development and object avoidance technologies; that lack of successful development of these technologies need not preclude continued development of

Aspect-Oriented Model-Driven Software Product Line Engineering

Science.gov (United States)

Groher, Iris; Voelter, Markus

Software product line engineering aims to reduce development time, effort, cost, and complexity by taking advantage of the commonality within a portfolio of similar products. The effectiveness of a software product line approach directly depends on how well feature variability within the portfolio is implemented and managed throughout the development lifecycle, from early analysis through maintenance and evolution. This article presents an approach that facilitates variability implementation, management, and tracing by integrating model-driven and aspect-oriented software development. Features are separated in models and composed of aspect-oriented composition techniques on model level. Model transformations support the transition from problem to solution space models. Aspect-oriented techniques enable the explicit expression and modularization of variability on model, template, and code level. The presented concepts are illustrated with a case study of a home automation system.

Development of an EVA systems cost model. Volume 2: Shuttle orbiter crew and equipment translation concepts and EVA workstation concept development and integration

Science.gov (United States)

1975-01-01

EVA crewman/equipment translational concepts are developed for a shuttle orbiter payload application. Also considered are EVA workstation systems to meet orbiter and payload requirements for integration of workstations into candidate orbiter payload worksites.

Accelerated Generation of Selfed Pure Line Plants for Gene Identification and Crop Breeding

Directory of Open Access Journals (Sweden)

Guijun Yan

2017-10-01

Full Text Available Production of pure lines is an important step in biological studies and breeding of many crop plants. The major types of pure lines for biological studies and breeding include doubled haploid (DH lines, recombinant inbred lines (RILs, and near isogenic lines (NILs. DH lines can be produced through microspore and megaspore culture followed by chromosome doubling while RILs and NILs can be produced through introgressions or repeated selfing of hybrids. DH approach was developed as a quicker method than conventional method to produce pure lines. However, its drawbacks of genotype-dependency and only a single chance of recombination limited its wider application. A recently developed fast generation cycling system (FGCS achieved similar times to those of DH for the production of selfed pure lines but is more versatile as it is much less genotype-dependent than DH technology and does not restrict recombination to a single event. The advantages and disadvantages of the technologies and their produced pure line populations for different purposes of biological research and breeding are discussed. The development of a concept of complete in vitro meiosis and mitosis system is also proposed. This could integrate with the recently developed technologies of single cell genomic sequencing and genome wide selection, leading to a complete laboratory based pre-breeding scheme.

Concept-guided development of classroom use of ICT : Concept-specific types of ICT use and their integration into teachers’ practices

NARCIS (Netherlands)

de Koster, S.

2017-01-01

Does a concept-guided approach in schools with either a ‘traditional’ or an ‘innovative’ educational concept contribute to the development of ICT use that becomes integrated in the teachers’ classroom practices? In order to answer this question we performed four, mainly qualitative, studies in five

Uses of the Sonicguide as a Concept Development Device.

Science.gov (United States)

Vopata, Alvin E.

1978-01-01

The article discusses the Sonicguide, and electronic mobility device for the blind, and makes some suggestions for its introduction to young children and for its use as an aid in the development of spatial concepts. (Author/DLS)

[Research advances in secondary development of Chinese patent medicines based on quality by design concept].

Science.gov (United States)

Gong, Xing-Chu; Chen, Teng; Qu, Hai-Bin

2017-03-01

Quality by design (QbD) concept is an advanced pharmaceutical quality control concept. The application of QbD concept in the research and development of pharmaceutical processes of traditional Chinese medicines (TCM) mainly contains five parts, including the definition of critical processes and their evaluation criteria, the determination of critical process parameters and critical material attributes, the establishment of quantitative models, the development of design space, as well as the application and continuous improvement of control strategy. In this work, recent research advances in QbD concept implementation methods in the secondary development of Chinese patent medicines were reviewed, and five promising fields of the implementation of QbD concept were pointed out, including the research and development of TCM new drugs and Chinese medicine granules for formulation, modeling of pharmaceutical processes, development of control strategy based on industrial big data, strengthening the research of process amplification rules, and the development of new pharmaceutical equipment.. Copyright© by the Chinese Pharmaceutical Association.

The effectiveness of concept mapping on development of critical thinking in nursing education: A systematic review and meta-analysis.

Science.gov (United States)

Yue, Meng; Zhang, Meng; Zhang, Chunmei; Jin, Changde

2017-05-01

As an essential skill in daily clinical nursing practice, critical thinking ability has been an important objective in nursing education. Concept mapping enables nursing students connect new information to existing knowledge and integrates interdisciplinary knowledge. However, there is a lack of evidence related to critical thinking ability and concept mapping in nursing education. The purpose of this systematic review and meta-analysis was to assess the effect of concept mapping in developing critical thinking in nursing education. This systematic review was reported in line with Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A search was conducted in PubMed, Web of science, Embase, Cochrane Central Register of Controlled Trials (CENTRAL), Cumulative Index to Nursing and Allied Health (CINAHL) and China National Knowledge Infrastructure (CNKI). Randomized controlled trials (RCT) comparing concept mapping and traditional teaching method were retrieved. Data were collected by two reviewers according to the data extraction tables. The methodological quality of included studies was assessed by other two reviewers. The results of meta-analysis were presented using mean difference (MD). Thirteen trials were summarized in the systematic review and eleven trials were included in the meta-analysis. The pooled effect size showed that, comparing with traditional methods, concept mapping could improve subjects' critical thinking ability measured by California Critical Thinking Disposition Inventory (CCTDI), California Critical Thinking Skill Test (CCTST) and Critical Thinking Scale (CTS). The subgroup analyses showed that concept mapping improved the score of all subscales. The result of this review indicated that concept mapping could affect the critical thinking affective dispositions and critical thinking cognitive skills. Further high quality research using uniform evaluation is required. Copyright © 2017 Elsevier Ltd. All rights reserved.

Developing Product Lines with 3rd-party components

NARCIS (Netherlands)

De Jonge, M.

2007-01-01

The trends toward product line development and toward adopting more 3rd-party software are hard to combine. The reason is that productlines demand fine control over the software (e.g., for diversity management), while 3rd-party software (almost by definition) provides only little or no control. A

Convergence of boundary judgments and innovative regional development concepts

NARCIS (Netherlands)

Bressers, Johannes T.A.; Boer, C.L.

2013-01-01

Purpose: Sustainable regional development is often accompanied by the introduction and gradual implementation of innovative concepts, like, e.g. "integrated natural resources management" or "sustainable tourism". From a managerial perspective, in order to contribute to improved sustainable regional

Project development and commercialisation of on-line analysis systems

International Nuclear Information System (INIS)

Watt, J.S.

2000-01-01

A project team first in the Australian Atomic Energy Commission (AAEC) and since 1982 in CSIRO has developed many on-line analysis systems for the mineral and energy industries. The development of these projects, usually lasting 7-10 years, has followed a common pattern of laboratory R and D, field trials, commercialisation and technology transfer. This successful pattern is illustrated using examples of the development of systems for the on-line analysis of mineral slurries, for determination of the ash content of coal on conveyors, and for determination of the flow rates of oil, water and gas in pipelines. The first two systems, licensed to Australian companies, are used world-wide. They are now the market leaders for radioisotope gauges in their application field. The third, the multiphase flow meter, was licensed in 1997 to an international company. This meter has even greater potential than the other two systems for economic benefit from its use and for numbers of installations. (author)

Concept development of exchange liquid regeneration

International Nuclear Information System (INIS)

Mader, D.L.

1985-08-01

Concepts are described for regeneration of the intermediate liquid used for isotope exchange in indirect laser isotope separation processes where the laser operates on a process gas distinct from the feed stream. The specific case of regeneration of an exchange liquid consisting of water, sodium hydroxide, and dimethyl sulfoxide for a process to separate deuterium from hydrogen using laser irradiation of trifluoromethane gas is developed. A water feed stream is converted to steam which rises in a chemical process column where it redeuterates a descending flow of exchange liquid without causing significant changes in its chemical composition

Development and verification of ground-based tele-robotics operations concept for Dextre

Science.gov (United States)

Aziz, Sarmad

2013-05-01

The Special Purpose Dextreous Manipulator (Dextre) is the latest addition to the on-orbit segment of the Mobile Servicing System (MSS); Canada's contribution to the International Space Station (ISS). Launched in March 2008, the advanced two-armed robot is designed to perform various ISS maintenance tasks on robotically compatible elements and on-orbit replaceable units using a wide variety of tools and interfaces. The addition of Dextre has increased the capabilities of the MSS, and has introduced significant complexity to ISS robotics operations. While the initial operations concept for Dextre was based on human-in-the-loop control by the on-orbit astronauts, the complexities of robotic maintenance and the associated costs of training and maintaining the operator skills required for Dextre operations demanded a reexamination of the old concepts. A new approach to ISS robotic maintenance was developed in order to utilize the capabilities of Dextre safely and efficiently, while at the same time reducing the costs of on-orbit operations. This paper will describe the development, validation, and on-orbit demonstration of the operations concept for ground-based tele-robotics control of Dextre. It will describe the evolution of the new concepts from the experience gained from the development and implementation of the ground control capability for the Space Station Remote Manipulator System; Canadarm 2. It will discuss the various technical challenges faced during the development effort, such as requirements for high positioning accuracy, force/moment sensing and accommodation, failure tolerance, complex tool operations, and the novel operational tools and techniques developed to overcome them. The paper will also describe the work performed to validate the new concepts on orbit and will discuss the results and lessons learned from the on-orbit checkout and commissioning of Dextre using the newly developed tele-robotics techniques and capabilities.

FUSRAP equipment concept development study

International Nuclear Information System (INIS)

Hinerman, K.B.; Smith, R.E.

1981-01-01

Under DOE contract, Dalton-Dalton-Newport, Inc. is performing an engineering evaluation of three selected FUSRAP sites in an effort to generate equipment concepts to perform remedial action for retrieval, packaging, storing, and transporting contaminated soil and other debris. Along with this engineering evaluation, an analysis of state and Federal regulations was made which had significant impact on the selected equipment and costs for each remedial action concept

Concept Development in Learning Physics: The Case of Electric Current and Voltage Revisited

Science.gov (United States)

Koponen, Ismo T.; Huttunen, Laura

2013-01-01

In learning conceptual knowledge in physics, a common problem is the development and differentiation of concepts in the learning process. An important part of this development process is the re-organisation or re-structuring process in which students' conceptual knowledge and concepts change. This study proposes a new view of concept…

Concept development of the human reliability data bank

International Nuclear Information System (INIS)

Miller, D.P.

1984-01-01

The US Nuclear Regulatory Commission and Sandia National Laboratories initiated a three-phased research program in 1981 to develop a plan for a human reliability data bank. This research initiative was in response to the data needs of the nuclear power industry's probabilistic risk assessment community. The three phases are: (1) develop the data bank concept; (2) develop an implementation plan and conduct a feasibility test; and (3) assist the sponsor in implementing the data bank. This paper briefly describes some of the results of the work performed during Phase A and outlines the program elements schedules for Phase B

Elementary pre-service teachers' conceptual understanding of dissolving: a Vygotskian concept development perspective

Science.gov (United States)

Harrell, Pamela; Subramaniam, Karthigeyan

2015-09-01

Background and purpose: The purpose of this study was to investigate and identify the nature and the interrelatedness of pre-service teachers' misconceptions and scientific concepts for explaining dissolving before, during, and after a 5E learning cycle lesson on dissolving, the intervention. Sample, design, and methods: Guided by Vygotsky's theory of concept development, the study focused specifically on the spontaneous, and spontaneous pseudo-concepts held by the 61 elementary pre-service teachers during a 15-week science methods course. Data included concept maps, interview transcripts, written artifacts, drawings, and narratives, and were thematically analyzed to classify concepts and interrelatedness. Results: Results of the study showed that spontaneous pseudo-concepts (1) dominated pre-service teachers' understandings about dissolving throughout the study, and (2) were simply associated with scientific concepts during and after the intervention. Conclusion: Collectively, the results indicated that the pre-service teachers' did not acquire a unified system of knowledge about dissolving that could be characterized as abstract, generalizable, and hierarchical. Implications include the need for (1) familiarity with pre-service teachers' prior knowledge about science content; (2) a variety of formative assessments to assess their misconceptions; (3) emphasizing the importance of dialectical method for concept development during instruction; and (4) skillful content instructors.

Environmental impact of the aerial power transmission lines

International Nuclear Information System (INIS)

Cristescu, D.; Rusan, R.

1993-01-01

In the last 10-12 years the existence of the high voltage lines existence within populated areas has been more and more contested. The paper tries to complete a blank in the Romanian technical literature by introducing the concept of 'line corridor' which is different from the occupied geometric area and from 'the line disturbed corridor'. The concept is meant to specify the area where the high frequency and 50 Hz electromagnetic pollution exceeds some given limits. The impact of the power transmission lines on the human body, due to the effects of the electric and magnetic fields, is considered. Also, the aspects concerning the visual impact, the acoustic and radio noise and the area expensing by the high voltage lines, are considered. International standards and regulations regarding the limitations of this effects are presented. (author)

J.S. Mill and A. de Tocqueville: tow concepts of liberty

Directory of Open Access Journals (Sweden)

A. V. Tavadova

2016-01-01

Full Text Available This paper presents an analysis of the two concepts of freedom, one of which was developed in line with classical liberalism, the second within the conservative tradition. Individual freedom as the supreme value, good and the goal of social development was considered an English liberal thinker John Stuart Mill. Another approach found expression in the works of the brightest representatives of the French conservative thought of Alexis de Tocqueville. In despite of the similarity of some theses, this polemic initiated the development of the two traditions in understanding the concept of civil liberties, continues to create and maintain the discussion of modern theoretical sociology. The research methodology of these concepts, to better understand the fundamental essence of the dispute between liberals and conservatives, seeking to find a balance between individual freedom in various aspects of its expression and the public interest.

Marketing concepts for pharmaceutical service development.

Science.gov (United States)

Grauer, D W

1981-02-01

Marketing concepts as a mechanism to help pharmacy develop, communicate, and sell future pharmaceutical services to consumers are discussed. Pharmacy as a profession must define itself broadly to take advantage of future growth opportunities. These growth opportunities will be realized from unmet health-care needs and changing consumer life style trends and values. New services must therefore be oriented toward consumers (i.e., patients, health professionals, and third-party agencies) to gain acceptance. Dispensing and drug-knowledge-distribution pharmaceutical services are reviewed by a product life cycle analysis of sales profits versus time. A marketing mix for new pharmaceutical services is developed consisting of service, price, distribution, and promotion strategies. Marketing can encompass those key elements necessary to meet the organizational goals of pharmacy and provide a systematic, disciplined approach for presenting a new service to consumers.

Land use planning using transit oriented development concept: Case study: Salaya station

Science.gov (United States)

Jarritthai, Supanee; Techpeeraparnich, Wasaporn

2017-10-01

The urban sprawl of Bangkok has increased with a motorization rate along with the expansion of the road network to adjacent cities. Nakhonpathom province, located at the southern edge of Bangkok has been affected by the urban sprawl. One of Nakhonpathom's Districts named "Salaya" Salaya has been quickly urbanized due to the establishment of many large academic institutes, such as universities, colleges and high schools as well as many commercial shopping malls. The period of 2013-2017, the Thai government introduced sustainable urban planning policy and promoted the use of public transportation systems. The Light Red Line railway extension of the Bangkok Metro Transit system will soon be constructed and the current Salaya Station will be replaced with new station. Many railway expansion projects will be built, should be designed by using transit-oriented development (TOD) scheme. This paper explores demographic information of the area, the demands of the community and relevant stakeholders for designing of the area using TOD. The proposed land use planning is designed based on the existing condition of the area as much as possible to meet the TOD standard and stakeholders' requirement. The result revealed that the guidelines of transit oriented development concept were of importance not only for planning of urban land use, supporting public transport, but also improving the quality of life.

Developing the Ability to Recontextualise Cellular Respiration: An Explorative Study in Recontextualising Biological Concepts

Science.gov (United States)

Wierdsma, Menno; Boersma, Kerst Th.; Knippels, Marie-Christine; van Oers, Bert

2016-01-01

In many science education practices, students are expected to develop an understanding of scientific knowledge without being allowed a view of the practices and cultures that have developed and use this knowledge. Therefore, students should be allowed to develop scientific concepts in relation to the contexts in which those concepts are used.…

Sustainable development in the EU : Redefining and operationalizing the concept

NARCIS (Netherlands)

Van Hees, Sander R W

Although sustainable development plays an important role in EU law, neither EU law nor EU policy clearly explains what the concept means and how it must be put into practice. Policy-makers, NGOs, politicians and businesses do, however, need guidance on sustainable development for the purpose of good

Theoretical aspect of the development of 'corporate social responsibility' concept

OpenAIRE

Milanović, Vesna M.; Bučalina, Andrea D.

2013-01-01

This paper presents a theoretical aspect of the development of 'corporate social responsibility' concept from the beginning of the 20th century to the present day, with the focus on the following periods: up to 1950, between 1950 an 1970, from 1970 to 1990 and from 1990 to now. We employed historical approach. We had an insight into the results of theoretical research on 'corporate social responsibility' concept, which were mostly presented in scientific papers in the English language. The ab...

Plutonium Immobilization Can Loading Concepts

International Nuclear Information System (INIS)

Kriikku, E.; Ward, C.; Stokes, M.; Randall, B.; Steed, J.; Jones, R.; Hamilton, L.; Rogers, L.; Fiscus, J.; Dyches, G.

1998-05-01

The Plutonium Immobilization Facility will encapsulate plutonium in ceramic pucks and seal the pucks inside welded cans. Remote equipment will place these cans in magazines and the magazines in a Defense Waste Processing Facility (DWPF) canister. The DWPF will fill the canister with glass for permanent storage. This report discusses five can loading conceptual designs and the lists the advantages and disadvantages for each concept. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas. The can loading welder and cutter are very similar to the existing Savannah River Site (SRS) FB-Line bagless transfer welder and cutter and thus they are a low priority development item

Development of environmentally advanced hydropower turbine system design concepts

Energy Technology Data Exchange (ETDEWEB)

Franke, G.F.; Webb, D.R.; Fisher, R.K. Jr. [Voith Hydro, Inc. (United States)] [and others

1997-08-01

A team worked together on the development of environmentally advanced hydro turbine design concepts to reduce hydropower`s impact on the environment, and to improve the understanding of the technical and environmental issues involved, in particular, with fish survival as a result of their passage through hydro power sites. This approach brought together a turbine design and manufacturing company, biologists, a utility, a consulting engineering firm and a university research facility, in order to benefit from the synergy of diverse disciplines. Through a combination of advanced technology and engineering analyses, innovative design concepts adaptable to both new and existing hydro facilities were developed and are presented. The project was divided into 4 tasks. Task 1 investigated a broad range of environmental issues and how the issues differed throughout the country. Task 2 addressed fish physiology and turbine physics. Task 3 investigated individual design elements needed for the refinement of the three concept families defined in Task 1. Advanced numerical tools for flow simulation in turbines are used to quantify characteristics of flow and pressure fields within turbine water passageways. The issues associated with dissolved oxygen enhancement using turbine aeration are presented. The state of the art and recent advancements of this technology are reviewed. Key elements for applying turbine aeration to improve aquatic habitat are discussed and a review of the procedures for testing of aerating turbines is presented. In Task 4, the results of the Tasks were assembled into three families of design concepts to address the most significant issues defined in Task 1. The results of the work conclude that significant improvements in fish passage survival are achievable.

Development of environmentally advanced hydropower turbine system design concepts

International Nuclear Information System (INIS)

Franke, G.F.; Webb, D.R.; Fisher, R.K. Jr.

1997-08-01

A team worked together on the development of environmentally advanced hydro turbine design concepts to reduce hydropower''s impact on the environment, and to improve the understanding of the technical and environmental issues involved, in particular, with fish survival as a result of their passage through hydro power sites. This approach brought together a turbine design and manufacturing company, biologists, a utility, a consulting engineering firm and a university research facility, in order to benefit from the synergy of diverse disciplines. Through a combination of advanced technology and engineering analyses, innovative design concepts adaptable to both new and existing hydro facilities were developed and are presented. The project was divided into 4 tasks. Task 1 investigated a broad range of environmental issues and how the issues differed throughout the country. Task 2 addressed fish physiology and turbine physics. Task 3 investigated individual design elements needed for the refinement of the three concept families defined in Task 1. Advanced numerical tools for flow simulation in turbines are used to quantify characteristics of flow and pressure fields within turbine water passageways. The issues associated with dissolved oxygen enhancement using turbine aeration are presented. The state of the art and recent advancements of this technology are reviewed. Key elements for applying turbine aeration to improve aquatic habitat are discussed and a review of the procedures for testing of aerating turbines is presented. In Task 4, the results of the Tasks were assembled into three families of design concepts to address the most significant issues defined in Task 1. The results of the work conclude that significant improvements in fish passage survival are achievable

An Engineer-To-Order Mass Customization Development Framework

DEFF Research Database (Denmark)

Bossen, Jacob; Hansson, Michael Natapon; Madsen, Ole

2014-01-01

competitiveness and revenue, in which Engineer-To-Order companies may benefit from adopting Mass Customization concepts. As automated manufacturing systems tends to be software intensive, it become equally important to enable reusability for physical components and for software related artefacts. In parallel...... to Mass Customization, Software Product Line Engineering has emerged as a way for software developers to manage variability and reusability. This paper seeks to combine the concepts of Mass Customization and Software Product Line Engineering, by introducing a development framework applicable for Engineer...

A modular restoration tower for electric power line transmission

Energy Technology Data Exchange (ETDEWEB)

Nicolazzi, L.C.; Pereira, J.C.; Leonel, C.E.L.; Rocha, G.B.; Bianchezzi, V.; Mendes, F. [Universidade Federal Santa Catarina (UFSC), Florianopolis, SC (Brazil). Dept. de Engenharia Mecanica], Emails: lauro@grante.ufsc.br, jcarlos@grante.ufsc.br; Luz, R.L. [ELETROSUL Centrais Eletricas S.A., Florianopolis, SC (Brazil)], Email: rluz@eletrosul.gov.br

2009-07-01

The main target of this R and D project is to develop an restoration tower for electric energy lines transmission. Whereas these towers should present the main features like transport facility, easiest assembling associated with a low cost of manufacture, it was applied the single-column tower concepts supported by stays, modularized, framed and articulated at the base. The concepts used for this development was a design methodology. From the different definition situations of load, numerical models have been developed focusing the design to the best of structural element arrangements of its modules. Then, tests were performed in laboratory to determine the module structural performance for different work load situations. These tests served to identify inconsistencies in the numerical models and proposed adjustments in its design to improve its performance on the strength and stability. (author)

California-Oregon 500-kV transmission line development of design criteria

International Nuclear Information System (INIS)

Simpson, K.D.

1990-01-01

The California-Oregon Transmission Project (COTP) encompassed the design and construction of a third 500-kV ac intertie between California and the Pacific Northwest Transmission system. Sargent ampersand Lundy's (S ampersand L) scope of work in the COTP includes the design of approximately 150 miles of new single-circuit, 500-kV transmission line from southern Oregon to the vicinity of Redding, California. This paper presents the development of the design criteria for this segment of the project, which crosses diverse topographic and climatic regions. This project is an example of the increasing utilization of computers in transmission line engineering. Almost all aspects of design involved the use of the computer. Also, the development of the design criteria for this project coincided with an early release of the TLWorkstation software package by EPRI. TLWorkstation is an engineering workstation containing a family of programs for various aspects of transmission line design. This engineering software allows for increasing refinement in the design and economic optimization of transmission lines and is becoming an important design tool for transmission engineers

CONCEPTS OF IMPROVING CURRENT PROTECTION OF POWER-GRID LINES

Directory of Open Access Journals (Sweden)

F. A. Romaniuk

2015-01-01

Full Text Available The  6–35  kV  power-grid  current  protection  serves  to  protect  the  transmission  lines against phase-to-phase short-circuits. The major disadvantage of it lies in the relatively large time delays of the last stages especially in the main sections of the grid owing to the stepped relay characteristics as well as a large number of the steps. A full-fledged protection of the 6–35 kV lines against inter-phase short circuits can be provided by the two-stage current protection: the first stage being the current cutoff without any time delay and the second stage – the maximum current protection where the time delay is linear contingent on the distance between the protection placement and the fault-point location. The article introduces the rating formulae for the time delays of the second-stage and their exemplary graphic presentation. The authors offer a variant for solving the problem with computation of the second-stage time delays in those instances where several feeders diverge from the bus bars of the substation located in the end of the protected line.Improving current protections for the 6–35 kV transmission lines with one-end power supply against interphase short-circuits can be based on the collective application of the following principles: accounting for the type and location of the short-circuit which provides for the high-performance cutoff zone instantaneous expansion and its independence on the mode of failure and the grid operation mode. It also allows increase of the last stage sensitiveness towards asymmetrical short-circuits; detection of the short-circuit location only on the results of fault currents measurement which simplifies the protection implementation; realization of the last (second protection stage with linear-dependent time delay which ensures potentiality of its operation speed increase.

Development of concept and neutronic calculation method for large LMFBR core

International Nuclear Information System (INIS)

Shirakata, K.; Ishikawa, M.; Ikegami, T.; Sanda, T.; Kaneto, K.; Kawashima, M.; Kaise, Y.; Shirakawa, M.; Hibi, K.

1991-01-01

Presented in this paper is the state of the art of reactor physics R and Ds for the development of concept and neutronic calculation method for large Liquid Metal Fast Breeder Reactor (LMFBR) core. Physics characteristics of concepts for mixed oxide (MOX) fueled large FBR core were investigated by a series of benchmark critical experiments. Next, an adequacy and accuracy of the current neutronic calculation method was assessed by the experiments analyses, and then neutronic prediction accuracies by the method were evaluated for physics characteristics of the large core. Concerns on core development were discussed in terms of neutronics. (author)

Multikanban model for disassembly line with demand fluctuation

Science.gov (United States)

Udomsawat, Gun; Gupta, Surendra M.; Al-Turki, Yousef A. Y.

2004-02-01

In recent years, the continuous growth in consumer waste and dwindling natural resources has seriously threatened the environment. Realizing this, several countries have passed regulations that force manufacturers not only to manufacture environmentally conscious products, but also to take back their used products from consumers so that the components and materials recovered from the products may be reused and/or recycled. Disassembly plays an important role in product recovery. A disassembly line is perhaps the most suitable setting for disassembly of products in large quantities. Because a disassembly line has a tendency to generate excessive inventory, employing a kanban system can reduce the inventory level and let the system run more efficiently. A disassembly line is quite different from an assembly line. For example, not only can the demand arrive at the last station, it can also arrive at any of the other stations in the system. The demand for a component on the disassembly line could fluctuate widely. In fact, there are many other complicating matters that need to be considered to implement the concept of kanbans in such an environment. In this paper, we discuss the complications that are unique to a disassembly line. We discuss the complications in utilizing the conventional production control mechanisms in a disassembly line setting. We then show how to overcome them by implementing kanbans in a disassembly line setting with demand fluctuation and introduce the concept of multi-kanban mechanism. We demonstrate its effectiveness using a simulation model. An example is presented to illustrate the concept.

Downward Price-Based Brand Line Extensions Effects on Luxury Brands

OpenAIRE

Royo-Vela, Marcelo; Voss, Eileen

2015-01-01

This study tries to examine the brand concept consistency, the self-concept congruence and the resulting loyalty status of the consumers in order to evaluate whether a downward price-based line extensions in the luxury goods market has any negative or positive effect on them. By conducting focus group and in-depth interviews it was tried to filter out how brand concepts of luxury brands are perceived before and after a line extension. Results revealed that a crucial aspect for the evaluation ...

Elementary Teacher's Conceptions of Inquiry Teaching: Messages for Teacher Development

Science.gov (United States)

Ireland, Joseph E.; Watters, James J.; Brownlee, Jo; Lupton, Mandy

2012-02-01

This study explored practicing elementary school teacher's conceptions of teaching in ways that foster inquiry-based learning in the science curriculum (inquiry teaching). The advocacy for inquiry-based learning in contemporary curricula assumes the principle that students learn in their own way by drawing on direct experience fostered by the teacher. That students should be able to discover answers themselves through active engagement with new experiences was central to the thinking of eminent educators such as Pestalozzi, Dewey and Montessori. However, even after many years of research and practice, inquiry learning as a referent for teaching still struggles to find expression in the average teachers' pedagogy. This study drew on interview data from 20 elementary teachers. A phenomenographic analysis revealed three conceptions of teaching for inquiry learning in science in the elementary years of schooling: (a) The Experience-centered conception where teachers focused on providing interesting sensory experiences to students; (b) The Problem-centered conception where teachers focused on engaging students with challenging problems; and (c) The Question-centered conception where teachers focused on helping students to ask and answer their own questions. Understanding teachers' conceptions has implications for both the enactment of inquiry teaching in the classroom as well as the uptake of new teaching behaviors during professional development, with enhanced outcomes for engaging students in Science.

Development of e-Juba, a preliminary proof of concept unmanned ...

African Journals Online (AJOL)

Development of e-Juba, a preliminary proof of concept unmanned aerial vehicle designed to facilitate the transportation of microbiological test samples from remote rural clinics to National Health Laboratory Service laboratories.

Development of combustion management concept for natural-aspirated small diesel engine; Shizen kyuki kogata diesel engine no nensho seigyo concept no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Wada, T; Kawano, T; Shoji, M; Kuniyosh, M; Yamashita, O; Nagao, A [Mazda Motor Corp., Tokyo (Japan); Yoshikawa, S [Zexel Corp., Tokyo (Japan)

1997-10-01

We have developed a combustion management concept for natural-aspirated small IDI diesel engines and achieved higher power, lower exhaust emissions and more comfort. The concept is related to improvements of intake volumetric efficiency, EGR effect, mixture formation caused by combustion chamber and spray characteristics, engine management system and after treatment device. This paper describes the concept and experimental results. 3 refs., 14 figs., 1 tab.

Exploring the concept of compressed air energy storage (CAES) in lined rock caverns at shallow depth: A modeling study of air tightness and energy balance

Energy Technology Data Exchange (ETDEWEB)

Kim, H.-M.; Rutqvist, J.; Ryu, D.-W.; Choi, B.-H.; Sunwoo, C.; Song, W.-K.

2011-07-15

This paper presents a numerical modeling study of coupled thermodynamic, multiphase fluid flow and heat transport associated with underground compressed air energy storage (CAES) in lined rock caverns. Specifically, we explored the concept of using concrete lined caverns at a relatively shallow depth for which constructing and operational costs may be reduced if air tightness and stability can be assured. Our analysis showed that the key parameter to assure long-term air tightness in such a system was the permeability of both the concrete lining and the surrounding rock. The analysis also indicated that a concrete lining with a permeability of less than 1×10{sup -18} m{sup 2} would result in an acceptable air leakage rate of less than 1%, with the operational pressure range between 5 and 8 MPa at a depth of 100 m. It was further noted that capillary retention properties and the initial liquid saturation of the lining were very important. Indeed, air leakage could be effectively prevented when the air-entry pressure of the concrete lining is higher than the operational air pressure and when the lining is kept moist at a relatively high liquid saturation. Our subsequent energy-balance analysis demonstrated that the energy loss for a daily compression and decompression cycle is governed by the air-pressure loss, as well as heat loss by conduction to the concrete liner and surrounding rock. For a sufficiently tight system, i.e., for a concrete permeability off less than 1×10{sup -18} m{sup 2}, heat loss by heat conduction tends to become proportionally more important. However, the energy loss by heat conduction can be minimized by keeping the air-injection temperature of compressed air closer to the ambient temperature of the underground storage cavern. In such a case, almost all the heat loss during compression is gained back during subsequent decompression. Finally, our numerical simulation study showed that CAES in shallow rock caverns is feasible from a leakage

Developing self-concept instrument for pre-service mathematics teachers

Science.gov (United States)

Afgani, M. W.; Suryadi, D.; Dahlan, J. A.

2018-01-01

This study aimed to develop self-concept instrument for undergraduate students of mathematics education in Palembang, Indonesia. Type of this study was development research of non-test instrument in questionnaire form. A Validity test of the instrument was performed with construct validity test by using Pearson product moment and factor analysis, while reliability test used Cronbach’s alpha. The instrument was tested by 65 undergraduate students of mathematics education in one of the universities at Palembang, Indonesia. The instrument consisted of 43 items with 7 aspects of self-concept, that were the individual concern, social identity, individual personality, view of the future, the influence of others who become role models, the influence of the environment inside or outside the classroom, and view of the mathematics. The result of validity test showed there was one invalid item because the value of Pearson’s r was 0.107 less than the critical value (0.244; α = 0.05). The item was included in social identity aspect. After the invalid item was removed, Construct validity test with factor analysis generated only one factor. The Kaiser-Meyer-Olkin (KMO) coefficient was 0.846 and reliability coefficient was 0.91. From that result, we concluded that the self-concept instrument for undergraduate students of mathematics education in Palembang, Indonesia was valid and reliable with 42 items.

The Development of the Concept of Atoms and Molecules

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 1. The Development of the Concept of Atoms and Molecules - Dalton and Beyond. K L Sebastian ... Author Affiliations. K L Sebastian1. Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India.

The Development of the Concept of Atoms and Molecules

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 12. The Development of the Concept of Atoms and Molecules - Dalton and Beyond. K L Sebastian ... Author Affiliations. K L Sebastian1. Department of Inorganic and Physical Chemistry, Indian Institute of Science, Bangalore 560012, India.

Development of Smart Sensors System Based on Formal Concept Analysis and Ontology Model

Directory of Open Access Journals (Sweden)

Hongsheng Xu

2013-06-01

Full Text Available The smart sensor is the product of the combination of one or more sensitive components, precision analog circuits, digital circuits, microprocessor, communication interface, intelligent software systems and hardware integration in a packaging component. Formal concept analysis is from the given data to automatically extract the classification relationship between the entire hidden concept and concept, formation of concept model. Ontology is a set of relations between concepts of the specific domain and concept, and it can effectively express the general knowledge of specific field. The paper proposes development of smart sensors system based on formal concept analysis and ontology model. Smart sensor is a micro processor, sensor with information detection, information processing, information memory, logical thinking and judging function. The methods can improve the effect of the smart sensors.

Development of the advanced on-line BWR core monitoring system TiARA

International Nuclear Information System (INIS)

Kobayashi, Yoko; Yamazaki, Hiroshi

1996-01-01

Development of an integrated computer environment to support plant operators and station nuclear engineers is a recent activity. In achieving this goal, an advanced on-line boiling water reactor (BWR) core monitoring system: TiARA has been developed by Toden Software. An integrated design approach was performed through the introduction of recent computer technologies, a sophisticated human/machine interface (HMI) and an advanced nodal method. The first prototype of TiARA was ready in early 1996. This prototype is now undergoing a field test at Kashiwazaki-Kariwa unit 6. After successful completion of this test, the authors will have achieved the following goals: (1) consistency between on-line core monitoring system and off-line core management system; (2) an enhanced HMI and database; (3) user-friendly operability and maintainability; (4) system development from the utilities' standpoint to fully satisfy operator needs

Design concept of HYPER (HYbrid Power Extraction Reactor)

International Nuclear Information System (INIS)

Park, Won S.; Song, Tae Y.; Yu, Dong H.; Kim, Chang H.

1999-01-01

Korea Atomic Energy Research Institute (KAERI) has been performing accelerator driven system related research and development called HYPER for the transmutation of nuclear waste and energy production through the transmutation process. Some major design features of HYPER have been developed and employed. On-power fueling concepts are employed to keep system power constant with a minimum variation of accelerator power. A hollow cylinder-type metal fuel is designed for the on-line refueling concept. Pb-Bi is adopted as a coolant and spallation target material. 1 GeV 13 mA proton beam is designed to be provided for HYPER. HYPER is to transmute about 380 kg of TRU a year and produce 1000 MWth power. The support ratio of HYPER for LWR units producing the same power is believed to be 5 to 6. (author)

Processes Of Self-Concept Development Among Children and Adolescents

DEFF Research Database (Denmark)

Spaten, Ole Michael

on childrens's development may be conquered by broader perspectives in theory and, methodology. He proposed a scientific perspective as the ecology of human development and, the Person-Process-Context-Time model (ibid). Our results includes that childrens's and adolescent's active internalization (Valsiner...... & Van der Veer, 1988). amd dialogical, cultural self-autorship are important themes for an understanding of processes of self-concept development among Danish children and adolescents from diverse cultual backgrounds. Limitations for this research as well as further directions for new studies...

CONTEMPORARY DESIGN CONCEPTS IN CAMOUFLAGE: UNIVERSAL VERSUS SPECIALIZED

Directory of Open Access Journals (Sweden)

TACHEV Momchil

2015-06-01

Full Text Available In present days there is a strong influence of the concept incorporating increased use of low intensive colours and small “digitalized” form structures for modern army camouflage designs. It was proclaimed as a revolutionary “universal” design line. It was supposed to be superior to others patterns designs and to be optimal for most types of environment. Meanwhile, some arm forces insist on developing more limited as terrain range camouflage design but with better efficiency and specialization. These two concepts in design reflect the political and the military philosophies of the countries they represent. However, at the end for the soldiers at the battlefield it is a matter of survival.

Development of new target concepts for proton beams at CERN/ISOLDE

CERN Document Server

Delonca, Melanie; Montavon, Ghislain; Peyraut, Francois

More and more, the power of primary beam sent onto targets increases until reaching several kiloWatts of magnitude, inducing new problematic and challenges. Consequently, the need of new target design arises and leads to new conceptual design proposal. Amongst them, a concept of Lead Bismuth Eutectic (LBE) loop target making use of an heat exchanger (HEX) and a pump has been proposed during the European project EURISOL Design Study. This concept proposed an improvement in terms of release efficiency of short-lived species by transforming the irradiated liquid into droplets shape. This thesis presents the development of this target design proposal. A prototype target has been developed and will be tested under proton beam at ISOLDE at Cern, Geneva. Several analytical tools for the study of this kind of targets are proposed, taking into account different design parameters. These tools can be applied for other high power target concept and allow an easy dimensioning of this kind of targets. As well, an innovativ...

Anthropology, tourism and transition: Concepts of tourism development in Knjaževac

Directory of Open Access Journals (Sweden)

Baćević Jana

2006-01-01

Full Text Available Anthropological research of tourism in Serbia has usually followed a somewhat simplified concept according to which theory translates into application or practice; that is, anthropology offers conclusions to be later applied in tourism development. The domain of anthropological expertise in this matter was traditionally considered to be "popular" or folk culture, or rather its use in tourism. However, I claim that anthropology of tourism offers a greater number of research opportunities, especially in view of development of tourism as part of transitional processes. In this paper, I present the preliminary results of research on concepts of tourism development in Knjaževac, conducted in 2003 and 2005, and point to how attitudes that people have towards tourism reflect their perception and conceptualization of wider social and economical processes such as transition and globalization. Finally, I discuss some of the implications of these concepts for the future application of anthropology in tourism research.

Status of spent fuel dry storage concepts: concerns, issues and developments

International Nuclear Information System (INIS)

1985-11-01

This report is intended to provide the reader with a general understanding of the various dry storage concepts and facilities required to support them. The outstanding technical concerns relative to dry storage installations, as well as, past and planned demonstration programs are briefly described. Such other activities as the development and approval of a design criteria standard is presented. An updated review of the cost of the various concepts are discussed

Developing concepts for improved efficiency of robot work preparation

NARCIS (Netherlands)

Essers, M.S.; Vaneker, Thomas H.J.

2013-01-01

SInBot[1] is a large research project that focuses on maximizing the efficient use of mobile industrial robots during medium sized production runs. The system that will be described in this paper will focusses on the development and validation of concepts for efficient work preparation for cells of

Developing and Evaluating Animations for Teaching Quantum Mechanics Concepts

Science.gov (United States)

Kohnle, Antje; Douglass, Margaret; Edwards, Tom J.; Gillies, Alastair D.; Hooley, Christopher A.; Sinclair, Bruce D.

2010-01-01

In this paper, we describe animations and animated visualizations for introductory and intermediate-level quantum mechanics instruction developed at the University of St Andrews. The animations aim to help students build mental representations of quantum mechanics concepts. They focus on known areas of student difficulty and misconceptions by…

On sustainable development of uranium mining industry in China based on the concept of ecological security

International Nuclear Information System (INIS)

Wu Shali; Tai Kaixuan

2011-01-01

Ecological security is an important issue for sustainable development of mining industry, on which the development of nuclear industry and nuclear power is based. But uranium mining and processing has larger effect on ecological environment which mainly include tailings, waste rock, waste water, and radiation effects. In this paper, the dialectical relationship between ecological security and sustainable relationship is analyzed, the ecological safety concept at home and abroad is compared and the role that ecological safety plays in the sustainable development of uranium mining based on analysis of restricting factors on uranium mining in China from the perspective of ecological security is also probed into. To achieve sustainable development of the uranium mining industry in China, an ecological security concept from four aspects must be established: 1) the concept of ecological security management; 2) the scientific concept of ecological security; 3) the concept of ecological security investment; and 4) the concept of ecological security responsibility. (authors)

SOCIO-ECONOMIC ASPECTS OF THE CONCEPT OF SUSTAINABLE DEVELOPMENT IN AZERBAIJAN REPUBLIC

Directory of Open Access Journals (Sweden)

Z. T. Imrani

2016-01-01

Full Text Available Aim. The aim is to determine the socio-economic aspects of sustainable development of the Republic of Azerbaijan taking into account economic, environmental, social and environmental opportunities of the country; to find the rationale for the concept of sustainable development to eliminate major differences specific to regional economic development, management of economic and social development of the regions.Methods. Historical and comparative analysis, system approach, analysis of statistical and mathematical materials.Findings. We identified the advantages of the concept of sustainable development; cunducted the analysis of the dynamics of development of the leading industries in the region; studied the most promising sectors of the regions from the economic and geographic point of view.Conclusion. We identified socio-economic aspects of sustainable development of the Republic of Azerbaijan.

Development of a fast multi-line x-ray CT detector for NDT

International Nuclear Information System (INIS)

Hofmann, T.; Nachtrab, F.; Schlechter, T.; Mühlbauer, J.; Schröpfer, S.; Firsching, M.; Uhlmann, N.; Neubauer, H.; Ernst, J.; Schweiger, T.; Oberst, M.; Meyer, A.

2015-01-01

Typical X-ray detectors for non-destructive testing (NDT) are line detectors or area detectors, like e.g. flat panel detectors. Multi-line detectors are currently only available in medical Computed Tomography (CT) scanners. Compared to flat panel detectors, line and multi-line detectors can achieve much higher frame rates. This allows time-resolved 3D CT scans of an object under investigation. Also, an improved image quality can be achieved due to reduced scattered radiation from object and detector themselves. Another benefit of line and multi-line detectors is that very wide detectors can be assembled easily, while flat panel detectors are usually limited to an imaging field with a size of approx. 40 × 40 cm 2 at maximum. The big disadvantage of line detectors is the limited number of object slices that can be scanned simultaneously. This leads to long scan times for large objects. Volume scans with a multi-line detector are much faster, but with almost similar image quality. Due to the promising properties of multi-line detectors their application outside of medical CT would also be very interesting for NDT. However, medical CT multi-line detectors are optimized for the scanning of human bodies. Many non-medical applications require higher spatial resolutions and/or higher X-ray energies. For those non-medical applications we are developing a fast multi-line X-ray detector.In the scope of this work, we present the current state of the development of the novel detector, which includes several outstanding properties like an adjustable curved design for variable focus-detector-distances, conserving nearly uniform perpendicular irradiation over the entire detector width. Basis of the detector is a specifically designed, radiation hard CMOS imaging sensor with a pixel pitch of 200 μ m. Each pixel has an automatic in-pixel gain adjustment, which allows for both: a very high sensitivity and a wide dynamic range. The final detector is planned to have 256 lines of

Stokes line width

International Nuclear Information System (INIS)

Nikiskov, A.I.; Ritus, V.I.

1993-01-01

The concept of Stokes line width is introduced for the asymptotic expansions of functions near an essential singularity. Explicit expressions are found for functions (switching functions) that switch on the exponentially small terms for the Dawson integral, Airy function, and the gamma function. A different, more natural representation of a function, not associated with expansion in an asymptotic series, in the form of dominant and recessive terms is obtained by a special division of the contour integral which represents the function into contributions of higher and lower saddle points. This division leads to a narrower, natural Stokes line width and a switching function of an argument that depends on the topology of the lines of steepest descent from the saddle point

Defining project scenarios for the agile requirements engineering product-line development questionnaire

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

Design concepts and advanced manipulator development for nuclear fuel cycle facilities

International Nuclear Information System (INIS)

Feldman, M.J.

1985-01-01

In the Fuel Recycle Division, Consolidated Fuel Reprocessing Program at the Oak Ridge National Laboratory, a comprehensive remote systems development program has existed for the past seven years. The new remote technology under development is expected to significantly improve remote operations by extending the range of tasks accomplished by remote means and increasing the efficiency of remote work undertaken. The application of advanced manipulation is viewed as an essential part of a series of design directions whose sum describes a somewhat unique blend of old and new technology. A design direction based upon the Teletec concept is explained and recent progress in the development of an advanced servomanipulator-based maintenance concept is summarized to show that a new generation of remote systems is feasible through advanced technology. 14 refs., 14 figs

The transmission theory of electrostatic analyzer in six dimensional phase space and the concept design of a supersensitive mass spectrometer beam line for HI-13 tandem accelerator

International Nuclear Information System (INIS)

Guan Xialing; Cao Qingxi; Zhang Jie; Ye Jingping

1986-01-01

It follows from the motion equations of charged particle in curvilinear coordinates system that the transfer matrix of electrostatic analyzer was derived in six dimensional phase space. In accordance with these matrixes, the concept design of the supersensitive mass spectrometer beam line for HI-13 tandem accelerator was calculated

The concepts of developing mobile games for the operating system Android

OpenAIRE

Hartman, Jernej

2011-01-01

The diploma thesis describes the concepts behind developing mobile games for the Android operating system. The thesis first covers mobile games and everything related to them, from mobile operating systems to mobile devices. It also describes how mobile games work and compares different concepts regarding their implementation. It then presents and covers the target mobile operating system of this thesis – the Android – describing its architecture and the operation of applications using this o...

Extending Life Concepts to Complex Systems

Directory of Open Access Journals (Sweden)

Jean Le Fur

2013-01-01

Full Text Available There is still no consensus definition of complex systems. This article explores, as a heuristic approach, the possibility of using notions associated with life as transversal concepts for defining complex systems. This approach is developed within a general classification of systems, with complex systems considered as a general ‘living things’ category and living organisms as a specialised class within this category. Concepts associated with life are first explored in the context of complex systems: birth, death and lifetime, adaptation, ontogeny and growth, reproduction. Thereafter, a refutation approach is used to test the proposed classification against a set of diverse systems, including a reference case, edge cases and immaterial complex systems. The summary of this analysis is then used to generate a definition of complex systems, based on the proposal, and within the background of cybernetics, complex adaptive systems and biology. Using notions such as ‘birth’ or ‘lifespan’ as transversal concepts may be of heuristic value for the generic characterization of complex systems, opening up new lines of research for improving their definition.

Underground rock storage concepts for natural gas and LPG in Finland

International Nuclear Information System (INIS)

Saerkkae, P.

1990-01-01

Natural gas storage concepts are developed in Finland for both deep, unlined rock storages and cryogenic lined, near-surface storages. For butane and propane, Neste Oy has two unlined rock storages in Porvoo. Up to now, experiences are good on storage of LPG in rock temperature and higher than hydrostatic pressure. (author). 3 refs, 8 figs

Safety and environmental impact of the dual coolant blanket concept. SEAL subtask 6.2, final report

International Nuclear Information System (INIS)

Kleefeldt, K.; Dammel, F.; Gabel, K.; Jordan, T.; Schmuck, I.

1996-03-01

The European Union has been engaged since 1989 in a programme to develop tritium breeding blankets for application in a fusion power reactor. There are four concepts under development, namely two of the solid breeder type and two of the liquid breeder type. At the Forschungszentrum Karlsruhe one blanket concept of each line has been pursued so far with the so-called dual coolant type representing the liquid breeder line. In the dual coolant concept the breeder material (Pb-17Li) is circulated to external heat exchangers to carry away the bulk of the generated heat and to extract the tritium. Additionally, the heavily loaded first wall is cooled by high pressure helium gas. The safety and environmental impact of the dual coolant blanket concept has been assessed as part of the blanket concept selection excercise, a European concerted action, aiming at selecting the two most promising concepts for futher development. The topics investigated are: (a) Blanket materials and toxic materials inventory, (b) energy sources for mobilisation, (c) fault tolerance, (d) tritium and activation products release, and (e) waste generation and management. No insurmountable safety problems have been identified for the dual coolant blanket. The results of the assessment are described in this report. The information collected is also intended to serve as input to the EU 'Safety and Environmental Assessment of Fusion longterm Programme' (SEAL). The unresolved issues pertaining to the dual coolant blanket which would need further investigations in future programmes are outlined herein. (orig.) [de

Plasma chemistry for concept of sustainable development

International Nuclear Information System (INIS)

Chernyak, V.Yu.; Nedybaliuk, O.A.; Tsymbaliuk, O.M.; Fedirchuk, I.I.; Chunikhina, K.I.; Martysh, E.V.; Iukhimenko, V.V.; Veremii, Iu.P.; Prisyazhnevych, I.V.; Prysiazhna, O.V.

2016-01-01

This work is devoted to the exploration of the compatibility of the hybrid plasma-catalytic conversion of liquid hydrocarbons into syngas with the concept of sustainable development. The results of the experimental investigations indicate the high efficiency of plasma-catalytic conversion of ethanol to syngas and the small amount of waste (a few percent of feedstock weight). The results of the simulation of the kinetics using ZDPlasKin code for traditional thermochemical and hybrid plasma-catalytic conversions indicate some differences in their mechanisms, which lead to the significant changes in the syngas ratio.

Exploring the concept of compressed air energy storage (CAES) in lined rock caverns at shallow depth: A modeling study of air tightness and energy balance

International Nuclear Information System (INIS)

Kim, Hyung-Mok; Rutqvist, Jonny; Ryu, Dong-Woo; Choi, Byung-Hee; Sunwoo, Choon; Song, Won-Kyong

2012-01-01

Highlights: ► We carried out coupled thermodynamic, multiphase fluid flow and heat transport analysis. ► Coupled behavior associated with underground lined caverns for CAES was investigated. ► Air leakage could be reduced by controlling the permeability of concrete lining. ► Heat loss during compression would be gained back at subsequent decompression phase. -- Abstract: This paper presents a numerical modeling study of coupled thermodynamic, multiphase fluid flow and heat transport associated with underground compressed air energy storage (CAES) in lined rock caverns. Specifically, we explored the concept of using concrete lined caverns at a relatively shallow depth for which constructing and operation costs may be reduced if air tightness and stability can be assured. Our analysis showed that the key parameter to assure long-term air tightness in such a system was the permeability of both the concrete lining and the surrounding rock. The analysis also indicated that a concrete lining with a permeability of less than 1 × 10 −18 m 2 would result in an acceptable air leakage rate of less than 1%, with the operation pressure range between 5 and 8 MPa at a depth of 100 m. It was further noted that capillary retention properties and the initial liquid saturation of the lining were very important. Indeed, air leakage could be effectively prevented when the air-entry pressure of the concrete lining is higher than the operation air pressure and when the lining is kept at relatively high moisture content. Our subsequent energy-balance analysis demonstrated that the energy loss for a daily compression and decompression cycle is governed by the air-pressure loss, as well as heat loss by conduction to the concrete liner and surrounding rock. For a sufficiently tight system, i.e., for a concrete permeability of less than 1 × 10 −18 m 2 , heat loss by heat conduction tends to become proportionally more important. However, the energy loss by heat conduction can be

Inductive line energy storage generator

Energy Technology Data Exchange (ETDEWEB)

Choi, P [Ecole Polytechnique, Palaiseau (France). Laboratoire de Physique des Milieux Ionises

1997-12-31

The inductive energy storage (IES) generator has long been considered to be the most efficient system for energy usage in large pulsed power system at the MA level. A number of parameters govern the efficiency of energy transfer between the storage capacitors and the load, and the level of current deliverable to the load. For high power system, the energy storage capacitors are arranged as a Marx generator. The primary constraints are the inductances in the various parts of the circuit, in particular, the upstream inductance between the Marx and the POS, and the downstream inductance between the POS and the load. This paper deals with the effect of replacing part of the upstream inductance with a transmission line and introduces the new concept of an inductive line for energy storage (ILES). Extensive parametric scans were carried out on circuit simulations to investigate the effect of this upstream transmission line. A model was developed to explain the operation of the ILES design based on the data obtained. Comparison with an existing IES generator shows that the ILES design offers a significant improvement in the maximum current and hence energy delivered to an inductive load. (author). 5 figs., 1 ref.

Covariant electromagnetic field lines

Science.gov (United States)

Hadad, Y.; Cohen, E.; Kaminer, I.; Elitzur, A. C.

2017-08-01

Faraday introduced electric field lines as a powerful tool for understanding the electric force, and these field lines are still used today in classrooms and textbooks teaching the basics of electromagnetism within the electrostatic limit. However, despite attempts at generalizing this concept beyond the electrostatic limit, such a fully relativistic field line theory still appears to be missing. In this work, we propose such a theory and define covariant electromagnetic field lines that naturally extend electric field lines to relativistic systems and general electromagnetic fields. We derive a closed-form formula for the field lines curvature in the vicinity of a charge, and show that it is related to the world line of the charge. This demonstrates how the kinematics of a charge can be derived from the geometry of the electromagnetic field lines. Such a theory may also provide new tools in modeling and analyzing electromagnetic phenomena, and may entail new insights regarding long-standing problems such as radiation-reaction and self-force. In particular, the electromagnetic field lines curvature has the attractive property of being non-singular everywhere, thus eliminating all self-field singularities without using renormalization techniques.

Self-Shielding Of Transmission Lines

Energy Technology Data Exchange (ETDEWEB)

Christodoulou, Christos [Univ. of New Mexico, Albuquerque, NM (United States)

2017-03-01

The use of shielding to contend with noise or harmful EMI/EMR energy is not a new concept. An inevitable trade that must be made for shielding is physical space and weight. Space was often not as much of a painful design trade in older larger systems as they are in today’s smaller systems. Today we are packing in an exponentially growing number of functionality within the same or smaller volumes. As systems become smaller and space within systems become more restricted, the implementation of shielding becomes more problematic. Often, space that was used to design a more mechanically robust component must be used for shielding. As the system gets smaller and space is at more of a premium, the trades starts to result in defects, designs with inadequate margin in other performance areas, and designs that are sensitive to manufacturing variability. With these challenges in mind, it would be ideal to maximize attenuation of harmful fields as they inevitably couple onto transmission lines without the use of traditional shielding. Dr. Tom Van Doren proposed a design concept for transmission lines to a class of engineers while visiting New Mexico. This design concept works by maximizing Electric field (E) and Magnetic Field (H) field containment between operating transmission lines to achieve what he called “Self-Shielding”. By making the geometric centroid of the outgoing current coincident with the return current, maximum field containment is achieved. The reciprocal should be true as well, resulting in greater attenuation of incident fields. Figure’s 1(a)-1(b) are examples of designs where the current centroids are coincident. Coax cables are good examples of transmission lines with co-located centroids but they demonstrate excellent field attenuation for other reasons and can’t be used to test this design concept. Figure 1(b) is a flex circuit design that demonstrate the implementation of self-shielding vs a standard conductor layout.

Continued Development of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Prather, E. E.; English, T. R.; Desch, S. M.; Keller, J. M.; CATS

2010-01-01

The Solar System Concept Inventory (SSCI) was developed in order to provide a pre-/post-instruction assessment instrument suitable for use in an introductory solar system course. The topics included on the SSCI focus on formation mechanisms, planetary interiors, atmospheric and surface effects, and small solar system bodies. These topics were selected by having faculty identify the key concepts they address when teaching about the solar system. Student interviews were then conducted to identify common naive ideas and reasoning difficulties relating to these key topics. As of December 2009, the SSCI has been through four semesters of both pre- and post-instruction classroom testing, involving over 2000 students and 11 institutions (ranging from two-year colleges to doctoral/research universities). After each semester of testing, item analysis statistics such as point biserial, percentage correct on pre- or post-testing, and frequently-chosen distracters (incorrect answers) were used to flag ineffective questions. Flagged questions were revised or eliminated. We present an overall outline of the SSCI development as well as our question-flagging criteria and question analyses from the latest round of field-testing. We would like to thank the NSF for funding under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS) Program.

A program to develop advanced EBT [ELMO Bumpy Torus] concepts and international collaboration on the Bumpy Torus concept: Final report

International Nuclear Information System (INIS)

1987-01-01

This project was undertaken to develop innovative concepts for improving the performance of ELMO Bumpy Torus devices in those aspects of plasma confinement that are particularly relevant to an eventual EBT reactor concept. These include effective magnetic utilization using Andreoletti coils, enhanced confinement using positive ambipolar potentials, and attractive divertor concepts that are compatible with formation and maintenance of ELMO rings. Each of the three major objectives was achieved and, except for the divertor studies, documented for publication and presentation at major scientific meetings. This report provides a brief recapitulation of the major results achieved in the form of a collection of those publications, together with this Introduction

Towards re-use of knowledge in the concept stage of development

NARCIS (Netherlands)

Smallenburg, K.; Halman, J.I.M.; Mal, van H.H.

1996-01-01

A framework for specifying the intended result of a product development project is introduced in the paper. This framework has been developed for the concept stage and facilitates the establishment and re-use of acquired knowledge. In this way, core capabilities naturally grow stronger with each

Concepts and Relations in Neurally Inspired In Situ Concept-Based Computing.

Science.gov (United States)

van der Velde, Frank

2016-01-01

In situ concept-based computing is based on the notion that conceptual representations in the human brain are "in situ." In this way, they are grounded in perception and action. Examples are neuronal assemblies, whose connection structures develop over time and are distributed over different brain areas. In situ concepts representations cannot be copied or duplicated because that will disrupt their connection structure, and thus the meaning of these concepts. Higher-level cognitive processes, as found in language and reasoning, can be performed with in situ concepts by embedding them in specialized neurally inspired "blackboards." The interactions between the in situ concepts and the blackboards form the basis for in situ concept computing architectures. In these architectures, memory (concepts) and processing are interwoven, in contrast with the separation between memory and processing found in Von Neumann architectures. Because the further development of Von Neumann computing (more, faster, yet power limited) is questionable, in situ concept computing might be an alternative for concept-based computing. In situ concept computing will be illustrated with a recently developed BABI reasoning task. Neurorobotics can play an important role in the development of in situ concept computing because of the development of in situ concept representations derived in scenarios as needed for reasoning tasks. Neurorobotics would also benefit from power limited and in situ concept computing.

Magnetic field line Hamiltonian

International Nuclear Information System (INIS)

Boozer, A.H.

1984-03-01

The magnetic field line Hamiltonian and the associated canonical form for the magnetic field are important concepts both for understanding toroidal plasma physics and for practical calculations. A number of important properties of the canonical or Hamiltonian representation are derived and their importance is explained

Staff nurse clinical leadership: a concept analysis.

Science.gov (United States)

Chávez, Eduardo C; Yoder, Linda H

2015-01-01

The purpose of this article is to provide a concept analysis of staff nurse clinical leadership (SNCL). A clear delineation of SNCL will promote understanding and encourage communication of the phenomenon. Clarification of the concept will establish a common understanding of the concept, and advance the practice, education, and research of this phenomenon. A review of the literature was conducted using several databases. The databases were searched using the following keywords: clinical leadership, nursing, bedside, staff nurse, front-line, front line, and leadership. The search yielded several sources; however, only those that focused on clinical leadership demonstrated by staff nurses in acute care hospital settings were selected for review. SNCL is defined as staff nurses who exert significant influence over other individuals in the healthcare team, and although no formal authority has been vested in them facilitates individual and collective efforts to accomplish shared clinical objectives. The theoretical definition for SNCL within the team context will provide a common understanding of this concept and differentiate it from other types of leadership in the nursing profession. This clarification and conceptualization of the concept will assist further research of the concept and advance its practical application in acute care hospital settings. © 2014 Wiley Periodicals, Inc.

Liquid oxygen (LO2) propellant conditioning concept testing

Science.gov (United States)

Perry, Gretchen L. E.; Orth, Michael S.; Mehta, Gopal K.

1993-01-01

Testing of a simplified LO2 propellant conditioning concept for future expendable launch vehicles is discussed. Four different concepts are being investigated: no-bleed, low-bleed, use of a recirculation line, and He bubbling. A full-scale test article, which is a facsimile of a propellant feed duct with an attached section to simulate heat input from an LO2 turbopump, is to be tested at the Cold Flow Facility of the Marshall Space Flight Center West Test Area. Work to date includes: design and fabrication of the test article, design of the test facility and initial fabrication, development of a test matrix and test procedures, initial predictions of test output, and heat leak calibration and heat exchanger tests on the test articles.

Development of an Optimizing Control Concept for Fossil-Fired Boilers using a Simulation Model

DEFF Research Database (Denmark)

Mortensen, J. H.; Mølbak, T.; Commisso, M.B.

1997-01-01

of implementation and commissioning. The optimizing control system takes into account the multivariable and nonlinear characteristics of the boiler process as a gain-scheduled LQG-controller is utilized. For the purpose of facilitating the control concept development a dynamic simulation model of the boiler process......An optimizing control system for improving the load following capabilities of power plant units has been developed. The system is implemented as a complement producing additive control signals to the existing boiler control system, a concept which has various practical advantages in terms...... model when designing a new control concept are discussed....

Custom: The Development and Use of a Legal Concept in the Middle Ages

DEFF Research Database (Denmark)

This volume, the fifth in the series, contains the proceedings from the conference Custom. The Development and Use of a Legal Concept in the Middle Ages held at the Law School at the University of Aarhus in May 2008. The volume covers topics from local case studies and studies of learned law...... to broader reflections on the development and use of the legal concept consuetudo and its connection with other sources of law, with the balance between local and regional power structures, and secular and ecclesiastical societies in medieval Europe. Combining the approaches of several historical disciplines...... - political, social, intellectual, and legal -international eminent scholars offer their views on central aspects of the function of legal customs and of the development of one of the most debated concepts in legal historiography of the last century. Students and scholars of European legal history and legal...

Straight-Line Target Tracking for Unmanned Surface Vehicles

Directory of Open Access Journals (Sweden)

Morten Breivik

2008-10-01

Full Text Available This paper considers the subject of straight-line target tracking for unmanned surface vehicles (USVs. Target-tracking represents motion control scenarios where no information about the target behavior is known in advance, i.e., the path that the target traverses is not defined apriori. Specifically, this work presents the design of a motion control system which enables an underactuated USV to track a target that moves in a straight line at high speed. The motion control system employs a guidance principle originally developed for interceptor missiles, as well as a novel velocity controller inspired by maneuverability and agility concepts found in fighter aircraft literature. The performance of the suggested design is illustrated through full-scale USV experiments in the Trondheimsfjord.

Multiscale Multiphysics Developments for Accident Tolerant Fuel Concepts

International Nuclear Information System (INIS)

Gamble, K. A.; Hales, J. D.; Yu, J.; Zhang, Y.; Bai, X.; Andersson, D.; Patra, A.; Wen, W.; Tome, C.; Baskes, M.; Martinez, E.; Stanek, C. R.; Miao, Y.; Ye, B.; Hofman, G. L.; Yacout, A. M.; Liu, W.

2015-01-01

U 3 Si 2 and iron-chromium-aluminum (Fe-Cr-Al) alloys are two of many proposed accident-tolerant fuel concepts for the fuel and cladding, respectively. The behavior of these materials under normal operating and accident reactor conditions is not well known. As part of the Department of Energy's Accident Tolerant Fuel High Impact Problem program significant work has been conducted to investigate the U 3 Si 2 and FeCrAl behavior under reactor conditions. This report presents the multiscale and multiphysics effort completed in fiscal year 2015. The report is split into four major categories including Density Functional Theory Developments, Molecular Dynamics Developments, Mesoscale Developments, and Engineering Scale Developments. The work shown here is a compilation of a collaborative effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory and Anatech Corp.

Development of data acquisition and control system for ICH & CD transmission line components test facility

Energy Technology Data Exchange (ETDEWEB)

Patel, Manoj, E-mail: manoj.patel@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India); Jha, Akhil [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India); Patel, Nidhi [Department of Instrumentation & Control Engineering, Dharmsinh Desai University, Nadiad 387001, Gujarat (India); Krishna, J.V.S. Hari; Rajnish, Kumar; Soni, Dipal; Verma, Sriprakash; Patel, Hriday; Trivedi, Rajesh; Mukherjee, Aparajita [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar 382428, Gujarat (India)

2016-11-15

Highlights: • Traveling Wave Resonator (TWR) gain achieved is 13.58 dB using 10 dB coupler. • Software module for Automatic calibration for power detector is developed and integrated. • Application module is developed using LabVIEW™ for high power RF operation of TWR. - Abstarct: India is developing a very high power test bed (∼MW level) based on concept of Travelling Wave Resonator (TWR) for testing of passive transmission line components [3]. Data acquisition and control system is required for safe and reliable operation of TWR. It includes online monitoring of input power and circulating ring power. Acquired RF signal provides information about forward and reflected RF power. For MW power level testing, system is protected against arc and thermal effect during CW operation. National Instrument make hardware and software have been used to acquire signals from RF detector, Arc detectors, IR camera and thermocouples etc. LabVIEW™ based software has been developed for calculation of RF parameters. Graphical user interface is developed for better visualization. Initial testing of the TWR setup with 10 dB coupler provides a power gain of 13.58 dB (22X). For future 3 MW TWR test bed the required power gain is ∼20 dB (100X) since the available source is ∼40 kW. This paper describes the detail design and integrated test results for data acquisition and control system for TWR test bed.

Exploring the Impact of Historically Black Colleges in Promoting the Development of Undergraduates' Self-Concept.

Science.gov (United States)

Berger, Joseph B.; Milem, Jeffrey F.

2000-01-01

Study explores how institutional context affects the development of self-concept in a sample of 273 African American college students. Findings suggest that students attending church affiliated historically Black colleges develop significantly higher self-ratings in three domains of self-concept-psychosocial wellness, academic, and achievement…

Developing Green Line Products

DEFF Research Database (Denmark)

Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

2011-01-01

This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

Human development: from conception to maturity

Directory of Open Access Journals (Sweden)

Valdemiro Carlos Sgarbieri

2017-05-01

Full Text Available Abstract The main objective of this review was to describe and emphasize the care that a woman must have in the period prior to pregnancy, as well as throughout pregnancy and after the birth of the baby, cares and duties that should continue to be followed by mother and child throughout the first years of the child’s life. Such cares are of nutritional, behavioral and lifestyle natures, and also involve the father and the whole family. Human development, from conception to maturity, consists of a critical and important period due to the multitude of intrinsic genetic and environmental factors that influence, positively or negatively, the person's entire life. The human being, who originated and passed his/her first phase of development in the womb, receives influence from different factors: a of parental origin (father and mother, including health and lifestyle of the father and mother, genetic inheritance, nutrition of the mother prior to and during pregnancy; b events that affected the mother and hence the child under development in intrauterine life, at birth (delivery, during perinatal period, and throughout the early years of life. The fragility of development continues throughout the preschool, school and adolescent periods during which proper nutrition with a balanced lifestyle is essential and depends on guidance from the parents, caregivers and teachers.

New Developments in the Simulation of Advanced Accelerator Concepts

International Nuclear Information System (INIS)

Paul, K.; Cary, J.R.; Cowan, B.; Bruhwiler, D.L.; Geddes, C.G.R.; Mullowney, P.J.; Messmer, P.; Esarey, E.; Cormier-Michel, E.; Leemans, W.P.; Vay, J.-L.

2008-01-01

Improved computational methods are essential to the diverse and rapidly developing field of advanced accelerator concepts. We present an overview of some computational algorithms for laser-plasma concepts and high-brightness photocathode electron sources. In particular, we discuss algorithms for reduced laser-plasma models that can be orders of magnitude faster than their higher-fidelity counterparts, as well as important on-going efforts to include relevant additional physics that has been previously neglected. As an example of the former, we present 2D laser wakefield accelerator simulations in an optimal Lorentz frame, demonstrating and gt;10 GeV energy gain of externally injected electrons over a 2 m interaction length, showing good agreement with predictions from scaled simulations and theory, with a speedup factor of ∼2,000 as compared to standard particle-in-cell.

Power control for wind turbines in weak grids: Concepts development

DEFF Research Database (Denmark)

Bindner, H.

1999-01-01

will make wind power more firm and possible to connect to weaker grids. So, when the concept is matured, theexpectation is that for certain wind power installations, the cost of the power control is paid back as added wind power capacity value and saved grid reinforcement costs. Different systems...... and analyze methods and technologies for making it viable to utilize more of the wind potential in remote areas. The suggestion is to develop a power control concept for wind turbines which will even out thepower fluctuations and make it possible to increase the wind energy penetration. The main options...... are to combine wind power with a pumped hydro power storage or with an AC/DC converter and battery storage. The AC/DC converter can either be an "add-on" typeor it can be designed as an integrated part of a variable speed wind turbine. The idea is that combining wind power with the power control concept...

Visualizing Geoscience Concepts Through Textbook Art (Invited)

Science.gov (United States)

Marshak, S.

2013-12-01

Many, if not most, college students taking an introductory geoscience course purchase, borrow, download, or rent one of several commercial textbooks currently available. Art used in such books has evolved significantly over the past three decades. Concepts once conveyed only by black-and-white line drawings, drawn by hand in ink, have gradually been replaced by full-color images produced digitally. Multiple high-end graphics programs, when used in combination, can yield images with super-realistic textures and palettes so that, in effect, anything that a book author wants to be drawn can be drawn. Because of the time and skill level involved in producing the art, the process commonly involves professional artists. In order to produce high-quality geoscience art that can help students (who are, by definition, non-experts) understand concepts, develop geoscience intuition, and hone their spatial-visualization skills, an author must address two problems. First, design a figure which can convey complex concepts through visual elements that resonate with students. Second, communicate the concepts to a professional artist who does not necessarily have personal expertise in geoscience, so that the figure rendered is both technically correct and visually engaging. The ultimate goal of geoscience art in textbooks is to produce an image that avoids unnecessary complexity that could distract from the art's theme, includes sufficient realism for a non-expert to relate the image to the real world, provides a personal context in which to interpret the figure, and has a layout that conveys relationships among multiple components of the art so that the art tells a coherent story. To accomplish this goal, a chain of choices--about perspective, sizes, colors, texture, labeling, captioning, line widths, and fonts--must be made in collaboration between the author and artist. In the new world of computer-aided learning, figures must also be able to work both on the computer screen and

Stakeholder cooperation in implementation of the sustainable development concept: Montenegrin tourist destinations

Directory of Open Access Journals (Sweden)

Ljiljana Pjerotic

2017-06-01

Full Text Available The importance of involving diverse stakeholders in tourism planning is receiving growing recognition. Tourism destination planning is a complex process, due to the existence of a wide variety of stakeholders with a wide range of opinions, multiple problem visions and different interests. Despite the complexity of the planning process one feature acknowledged for successful destination management planning is high level of stakeholder cooperation. The paper examines the level of stakeholder cooperation on the specific example of the sustainable development concept implementation in Montenegrin tourism. It starts with two hypotheses: first, the development level of instruments for managing tourist destination depends on stakeholder cooperation level in a particular destination, and second, implementation of the sustainable development concept is positively correlated with the development of instruments for managing tourist destination. The results have indicated poor implementation of tourism development plans and low level of stakeholder cooperation.

Self-concept and ego development in deaf adolescents: a comparative study.

Science.gov (United States)

van Gent, Tiejo; Goedhart, Arnold W; Knoors, Harry E T; Westenberg, P Michiel; Treffers, Philip D A

2012-01-01

Self-concept and ego development, two intertwined aspects of self-indicating well-being and social-cognitive maturation, respectively, were examined in a representative sample of deaf adolescents of normal intelligence (N = 68), using translated and adapted versions of Harter's (1988, Manual for the self-perception profile for adolescents. Denver, CO: University of Denver) multidimensional measure of self-concept and Loevinger's (1998, Technical foundations for measuring ego development. Mahwah, NJ: Lawrence Erlbaum) measure of ego development. Compared to hearing norm groups, deaf adolescents showed lower levels of self-perceived social acceptance, close friendships and ego development and higher physical appearance. Hierarchical multiple regression analyses controlling for sociodemographic variables showed positive associations of global self-worth with support for signing during childhood and quality of parent-child communication and of ego development with attending a regular school. Cluster analysis identified three social competence profiles: uniformly low competence, uniformly high competence, and low social acceptance with high physical appearance. Cluster membership was associated with school type, ego development, and (past) neurological disorder. The results are discussed in reference to interventions aimed at the well-being of deaf youth.

Development of at-line assay to monitor charge variants of MAbs during production.

Science.gov (United States)

St Amand, M M; Ogunnaike, B A; Robinson, A S

2014-01-01

One major challenge currently facing the biopharmaceutical industry is to understand how MAb microheterogeneity affects therapeutic efficacy, potency, immunogenicity, and clearance. MAb micro-heterogeneity can result from post-translational modifications such as sialylation, galactosylation, C-terminal lysine cleavage, glycine amidation, and tryptophan oxidation, each of which can generate MAb charge variants; such heterogeneity can affect pharmacokinetics (PK) considerably. Implementation of appropriate on-line quality control strategies may help to regulate bioprocesses, thus enabling more homogenous material with desired post-translational modifications and PK behavior. However, one major restriction to implementation of quality control strategies is the availability of techniques for obtaining on-line or at-line measurements of these attributes. In this work, we describe the development of an at-line assay to separate MAb charge variants in near real-time, which could ultimately be used to implement on-line quality control strategies for MAb production. The assay consists of a 2D-HPLC method with sequential in-line Protein A and WCX-10 HPLC column steps. To perform the 2D-HPLC assay at-line, the two columns steps were integrated into a single method using a novel system configuration that allowed parallel flow over column 1 or column 2 or sequential flow from column 1 to column 2. A bioreactor system was also developed such that media samples could be removed automatically from bioreactor vessels during production and delivered to the 2D-HPLC for analysis. With this at-line HPLC assay, we have demonstrated that MAb microheterogeneity occurs throughout the cell cycle whether the host cell line is grown under different or the same nominal culture conditions. © 2013 American Institute of Chemical Engineers.

The development of a digital logic concept inventory

Science.gov (United States)

Herman, Geoffrey Lindsay

Instructors in electrical and computer engineering and in computer science have developed innovative methods to teach digital logic circuits. These methods attempt to increase student learning, satisfaction, and retention. Although there are readily accessible and accepted means for measuring satisfaction and retention, there are no widely accepted means for assessing student learning. Rigorous assessment of learning is elusive because differences in topic coverage, curriculum and course goals, and exam content prevent direct comparison of two teaching methods when using tools such as final exam scores or course grades. Because of these difficulties, computing educators have issued a general call for the adoption of assessment tools to critically evaluate and compare the various teaching methods. Science, Technology, Engineering, and Mathematics (STEM) education researchers commonly measure students' conceptual learning to compare how much different pedagogies improve learning. Conceptual knowledge is often preferred because all engineering courses should teach a fundamental set of concepts even if they emphasize design or analysis to different degrees. Increasing conceptual learning is also important, because students who can organize facts and ideas within a consistent conceptual framework are able to learn new information quickly and can apply what they know in new situations. If instructors can accurately assess their students' conceptual knowledge, they can target instructional interventions to remedy common problems. To properly assess conceptual learning, several researchers have developed concept inventories (CIs) for core subjects in engineering sciences. CIs are multiple-choice assessment tools that evaluate how well a student's conceptual framework matches the accepted conceptual framework of a discipline or common faulty conceptual frameworks. We present how we created and evaluated the digital logic concept inventory (DLCI).We used a Delphi process to

Space Assembly, Maintenance and Servicing Study. Volume 4: Concept Development Plan

National Research Council Canada - National Science Library

1986-01-01

.... This concept development program (CDP), Volume IV of the SAMS final report, contains a summary of the selection of CDP candidates and a plan for completing the required analysis, tests and demonstrations...

The Potential of Religion in the Promotion and Implementation of the Concept of Sustainable Development

Science.gov (United States)

Sadowski, Ryszard F.

2017-12-01

This article presents religion's potential where the promotion and implementation of the concept of sustainable development are concerned. First inspired by Lynn White in the 1960s, discussion on religion's role in the ecological crisis now allows for an honest assessment of the ecological potential of various religious traditions and their contribution to the building of a sustainable world. This article on the one hand points to the religious inspirations behind the concept of sustainable development, and on the other highlights the joint action of representatives of religion and science in the name of sustainable development, as well as the involvement of religions in the concept's implementation.

Development of putative transgenic lines of cassava variety H-226 ...

African Journals Online (AJOL)

CMD) caused by the Indian cassava mosaic virus (ICMV) and Sri Lankan cassava mosaic virus (SLCMV). An attempt was done to develop transgenic cassava lines resistant to SLCMV through RNAi vector targeting a conserved 440 bp of 5' end ...

Longitudinal development of number line estimation and mathematics performance in primary school children

NARCIS (Netherlands)

Friso-van den Bos, I.; Kroesbergen, E.H.; van Luit, J.E.H.; Xenidou-Dervou, I.; Jonkman, L.M.; van der Schoot, M.; van Lieshout, E.C.D.M.

2015-01-01

Children's ability to relate number to a continuous quantity abstraction visualized as a number line is widely accepted to be predictive of mathematics achievement. However, a debate has emerged with respect to how children's placements are distributed on this number line across development. In the

Line shapes of atomic-candle-type Rabi resonances

International Nuclear Information System (INIS)

Coffer, J.G.; Camparo, J.C.; Sickmiller, B.; Presser, A.

2002-01-01

When atoms interact with a phase-modulated field, the probability of finding the atom in the excited-state oscillates at the second harmonic of the modulation frequency, 2ω m . The amplitude of this oscillating probability is a resonant function of the Rabi frequency Ω, and this is termed a β Rabi resonance. In this work, we examine the line shape of the β Rabi resonance both theoretically and experimentally. We find that a small-signal theory of the β-Rabi-resonance condition captures much of the line shape's character, and, in particular, that the resonance's 'line Q' (i.e., 2δΩ 1/2 /Ω) is proportional to the modulation frequency. This result can be applied to the atomic candle, where β Rabi resonances are employed to stabilize field strength. Considering our results in the context of developing an optical atomic candle, we find that a free-running diode laser's intensity noise could be improved by orders of magnitude using the atomic candle concept

Break preclusion concept and its application to the EPRTM reactor

Energy Technology Data Exchange (ETDEWEB)

Chapuliot, S., E-mail: stephane.chapuliot@areva.com; Migné, C.

2014-04-01

This paper provides a synthesis of the technical basis supporting the break preclusion concept and its implementation on the Main Coolant Lines and Main Steam Lines of the EPR™ reactor. In a first step, it describes the background of the break preclusion concept, and then it details the requirements associated to its implementation in a Defense In Depth approach.In second steps, main benefits and few illustrative examples are given for the MCL.

Development of an engineered safeguards system concept for a mixed-oxide fuel fabrication facility

International Nuclear Information System (INIS)

Chapman, L.D.; de Montmollin, J.M.; Deveney, J.E.; Fienning, W.C.; Hickman, J.W.; Watkins, L.D.; Winblad, A.E.

1976-08-01

An initial concept of an Engineered Safeguards System for a representative commercial mixed-oxide fuel fabrication facility is presented. Computer simulation techniques for evaluation and further development of the concept are described. An outline of future activity is included

Concept Development for Future Domains: A New Method of Knowledge Elicitation

National Research Council Canada - National Science Library

Shadrick, Scott B; Lussier, James W; Hinkle, Robin

2005-01-01

During the development of operational concepts for the Future Combat System of Systems' Unit of Employment and Unit of Action it became clear that the Army needed a more effective and efficient method...

Development of the Central Dogma Concept Inventory (CDCI) Assessment Tool

Science.gov (United States)

Newman, Dina L.; Snyder, Christopher W.; Fisk, J. Nick; Wright, L. Kate

2016-01-01

Scientific teaching requires scientifically constructed, field-tested instruments to accurately evaluate student thinking and gauge teacher effectiveness. We have developed a 23-question, multiple select--format assessment of student understanding of the essential concepts of the central dogma of molecular biology that is appropriate for all…

Developing and Implementing an Assessment Technique to Measure Linked Concepts

Science.gov (United States)

Ye, Li; Oueini, Razanne; Lewis, Scott E.

2015-01-01

The links students make among chemistry content is considered essential for a robust, enduring understanding in multiple learning theories. This article describes the development and implementation of an assessment technique, termed a Measure of Linked Concepts, designed to inform instructors on students' understanding of linking content…

Developing Preschool Teachers' Knowledge of Students' Number Conceptions

Science.gov (United States)

Tsamir, Pessia; Tirosh, Dina; Levenson, Esther; Tabach, Michal; Barkai, Ruthi

2014-01-01

This article describes a study that investigates preschool teachers' knowledge of their young students' number conceptions and the teachers' related self-efficacy beliefs. It also presents and illustrates elements of a professional development program designed explicitly to promote this knowledge among preschool teachers. Results…

Development of a Short Line Railroad Safety Institute : phase I - job analysis.

Science.gov (United States)

2014-04-01

The Federal Railroad Administrations (FRA) : Office of Research and Development (R&D) is : supporting the American Short Line and : Regional Railroad Association (ASLRRA) in the : development, implementation, and evaluation of : a proposed Short L...

A new press line concept for conveyor belts; Neues Pressenkonzept fuer Foerdergurte

Energy Technology Data Exchange (ETDEWEB)

Aumueller, Steffen [Siempelkamp Maschinen- und Anlagenbau GmbH und Co. KG, Krefeld (Germany)

2010-06-15

Pressure and temperature are the relevant process parameters for the vulcanisation of rubber products. Particularly, the vulcanisation of large-surface rubber products such as belt conveyors sets large requirements on the mechanical characteristics of the press lines. Siempelkamp Maschinen- und Anlagenbau GmbH and Co. KG (Krefeld, Federal Republic of Germany) is specialized on these requirements. For over 100 years, this company constructs vulcanisation presses for the belt conveyor industry. In the first ten decades, the layout of the press lines according to stiffness and transmission of large forces were in the focus. Till to the late 1980ies, these press lines represented the standard of the belt conveyor industry.

Development of a Z-pinch-driven ICF hohlraum concept on Z

International Nuclear Information System (INIS)

Cuneo, M.E.; Porter, J.L. Jr.; Vesey, R.A.

1999-01-01

Recent development of high power z-pinches (> 150 MW) on the Z driver has permitted the study of high-temperature, radiation-driven hohlraums. Three complementary, Z-pinch source-hohlraum-ICF capsule configurations are being developed to harness the x-ray output of these Z-pinch's. These are the dynamic-hohlraum, static-wall hohlraum, and Z-pinch-driven hohlraum concepts. Each has different potential strengths and concerns. In this paper, the authors report on the first experiments with the Z-pinch-driven hohlraum (ZPDH) concept. A high-yield ICF capsule design for this concept appears feasible, when driven by z-pinches from a 60 MA-class driver. Initial experiments characterize the behavior of the spoke array on Z-pinch performance and x-ray transmission, and the uniformity of radiation flux incident on a foam capsule in the secondary, for a single-sided drive. Measurements of x-ray wall re-emission power and spectrum, radiation temperatures, spoke-plasma location, and drive uniformity will be presented and compared with 0-D energetics, 2-D Lasnex rad-hydro, and 3-D radiosity calculations of energy transport and drive uniformity

Development of a Z-pinch-driven ICF hohlraum concept on Z

Energy Technology Data Exchange (ETDEWEB)

Cuneo, M E; Porter, Jr, J L; Vesey, R A [and others

1999-07-01

Recent development of high power z-pinches (> 150 MW) on the Z driver has permitted the study of high-temperature, radiation-driven hohlraums. Three complementary, Z-pinch source-hohlraum-ICF capsule configurations are being developed to harness the x-ray output of these Z-pinch's. These are the dynamic-hohlraum, static-wall hohlraum, and Z-pinch-driven hohlraum concepts. Each has different potential strengths and concerns. In this paper, the authors report on the first experiments with the Z-pinch-driven hohlraum (ZPDH) concept. A high-yield ICF capsule design for this concept appears feasible, when driven by z-pinches from a 60 MA-class driver. Initial experiments characterize the behavior of the spoke array on Z-pinch performance and x-ray transmission, and the uniformity of radiation flux incident on a foam capsule in the secondary, for a single-sided drive. Measurements of x-ray wall re-emission power and spectrum, radiation temperatures, spoke-plasma location, and drive uniformity will be presented and compared with 0-D energetics, 2-D Lasnex rad-hydro, and 3-D radiosity calculations of energy transport and drive uniformity.

Advanced Spacesuit Portable Life Support System Packaging Concept Mock-Up Design & Development

Science.gov (United States)

O''Connell, Mary K.; Slade, Howard G.; Stinson, Richard G.

1998-01-01

A concentrated development effort was begun at NASA Johnson Space Center to create an advanced Portable Life Support System (PLSS) packaging concept. Ease of maintenance, technological flexibility, low weight, and minimal volume are targeted in the design of future micro-gravity and planetary PLSS configurations. Three main design concepts emerged from conceptual design techniques and were carried forth into detailed design, then full scale mock-up creation. "Foam", "Motherboard", and "LEGOtm" packaging design concepts are described in detail. Results of the evaluation process targeted maintenance, robustness, mass properties, and flexibility as key aspects to a new PLSS packaging configuration. The various design tools used to evolve concepts into high fidelity mock ups revealed that no single tool was all encompassing, several combinations were complimentary, the devil is in the details, and, despite efforts, many lessons were learned only after working with hardware.

Longitudinal development of number line estimation and mathematics performance in primary school children

NARCIS (Netherlands)

Friso - van den Bos, Ilona; Kroesbergen, Evelyn; van Luit, Hans; Xenidou-Dervou, Iro; Jonkman, Lisa M.; Van der Schoot, Menno; Van Lieshout, Ernest C. D. M.

2015-01-01

Children’s ability to relate number to a continuous quantity abstraction visualized as a number line is widely accepted to be predictive of mathematics achievement. However, a debate has emerged with respect to how children’s placements are distributed on this number line across development. In the

The Concept of Happiness and Moral Development of "Filipinas" in the Academic Setting

Science.gov (United States)

Mallari, Shedy Dee C.; Ebreo, Edleen P.; Pelayo, Jose Maria G., III.

2015-01-01

This study determined salient themes of female individuals who are inside the academic setting on their concept of happiness and moral development. The idea of studying the Filipina Female Concept of Happiness came from two areas of study--Female Psychology and Positive Psychology. The researchers were intrigued by the idea that since the female…

Developing a survey to collect expertise in agile product line requirements engineering processes

OpenAIRE

Feng, Kunwu; Lempert, Meli; Tang, Yan; Tian, Kun; Cooper, Kendra M.L.; Franch Gutiérrez, Javier

2007-01-01

Current agile methods are focused on practices of small, rapid developing and iteration, more people oriented, less documentation projects, and the use of the methods in large, product line projects are somehow difficult. UTD and GESSI have started a project to develop an expert system that can assist a requirements enginer in selecting a requirements engineering process that is well suited for their project, in particular with respect to the use of agile and product line engineering methods....

English Teachers "On-Line": Developing a New Community of Discourse.

Science.gov (United States)

Leach, Jenny

1997-01-01

Presents the case study of an online conference for students of English in a teacher education course. Argues electronic conferencing reveals the inadequacy of the concept of "reflective practitioner" to describe and analyze the complex process of teacher development. Demonstrates the social character of learning, highlighting the place…

Innatism, Concept Formation, Concept Mastery and Formal Education

Science.gov (United States)

Winch, Christopher

2015-01-01

This article will consider the claim that the possession of concepts is innate rather than learned. Innatism about concept learning is explained through consideration of the work of Fodor and Chomsky. First, an account of concept formation is developed. Second the argument against the claim that concepts are learned through the construction of a…

Progress in development of MOSART concept with Th support

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, V.; Feynberg, O.; Merzlyakov, A.; Surenkov, A.; Zagnitko, A. [National Research Center, Kurchatov Inst., Moscow (Russian Federation); Afonichkin, V.; Bovet, A.; Khokhlov, V. [Inst. of High Temperature Electrochemisty, Ekaterinburg (Russian Federation); Subbotin, V.; Fazilov, R.; Gordeev, M.; Panov, A.; Toropov, A. [Inst. of Technical Physics, Snezhinsk (Russian Federation)

2012-07-01

A study is under progress to examine the feasibility of Molten Salt Actinide Recycler and Transmuter system with U-Th support (MOSART+Th) fuelled with different compositions of actinide tri-fluorides (AnF{sub 3}) from used LWR fuel. New fast-spectrum design options with homogeneous core and fuel salt with high enough solubility for AnF{sub 3} are being examined because of new goals. Experimental data base created was used for further development of MOSART+Th technology as applied to consumption of AnF{sub 3} while extracting their energy. The flexibility of single fluid MOSART+Th concept fuel cycle is underlined, particularly, possibility of its operation in self-sustainable mode (CR=1) using different loadings and make up. The paper summarizes the current status of the design data for the MOSART+Th concept received within ISTC 3749 Task. (authors)

Pubertal development in children and adolescents born after IVF and spontaneous conception

NARCIS (Netherlands)

Ceelen, M.; van Weissenbruch, M.M.; Vermeiden, J.P.W.; van Leeuwen, F.E.; Delemarre-van d Waal, H.A.

2008-01-01

BACKGROUND: Previous studies demonstrated a link between adverse conditions during prenatal life and the development of diseases in adult life. It is still unclear whether IVF conception could permanently affect early prenatal development in humans, with post-natal health consequences. The objective

Development of diagnostic test instruments to reveal level student conception in kinematic and dynamics

Science.gov (United States)

Handhika, J.; Cari, C.; Suparmi, A.; Sunarno, W.; Purwandari, P.

2018-03-01

The purpose of this research was to develop a diagnostic test instrument to reveal students' conceptions in kinematics and dynamics. The diagnostic test was developed based on the content indicator the concept of (1) displacement and distance, (2) instantaneous and average velocity, (3) zero and constant acceleration, (4) gravitational acceleration (5) Newton's first Law, (6) and Newton's third Law. The diagnostic test development model includes: Diagnostic test requirement analysis, formulating test-making objectives, developing tests, checking the validity of the content and the performance of reliability, and application of tests. The Content Validation Index (CVI) results in the category are highly relevant, with a value of 0.85. Three questions get negative Content Validation Ratio CVR) (-0.6), after revised distractors and clarify visual presentation; the CVR become 1 (highly relevant). This test was applied, obtained 16 valid test items, with Cronbach Alpha value of 0.80. It can conclude that diagnostic test can be used to reveal the level of students conception in kinematics and dynamics.

Transient formation of forbidden lines

International Nuclear Information System (INIS)

Rosmej, F.B.; Rosmej, O.N.

1996-01-01

An explanation of anomalously long time scales in the transient formation of forbidden lines is proposed. The concept is based on a collisionally induced density dependence of the relaxation times of metastable level populations in transient plasma. Generalization leads to an incorporation of diffusion phenomena. We demonstrate this new concept for the simplest atomic system: the He-like isoelectronic sequence. A new interpretation of the observed long duration and anomalously high intensity of spin-forbidden emission in hot plasmas is given. (author)

Transient formation of forbidden lines

Energy Technology Data Exchange (ETDEWEB)

Rosmej, F.B. [Bochum Univ., Ruhr (Germany). Inst. fuer Experimentalphysik V; Rosmej, O.N. [VNIIFTRI, Moscow Region (Russian Federation). MISDC

1996-05-14

An explanation of anomalously long time scales in the transient formation of forbidden lines is proposed. The concept is based on a collisionally induced density dependence of the relaxation times of metastable level populations in transient plasma. Generalization leads to an incorporation of diffusion phenomena. We demonstrate this new concept for the simplest atomic system: the He-like isoelectronic sequence. A new interpretation of the observed long duration and anomalously high intensity of spin-forbidden emission in hot plasmas is given. (author).

SUSTAINABLE BUSINESS COMPETITIVENESS: TRANSLATING CONCEPT INTO PRACTICE

Directory of Open Access Journals (Sweden)

Idqan Fahmi

2012-09-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE Globalization has proven to spur economic growth for many countries in the world. It has, however, also negative impacts in terms of widening income gap, environmental degradation etc. such that many are worried that the growth will not be sustainable. Triple bottom line was introduced to make the economic growth and company competitiveness more sustainable. Although to define the concept is easy, to make it implemented, especially by developing countries, is another matter. Education and research track by universities is suggested to be one best way to accelerate the implementation of the concept. A case of Graduate Program of Management and Business (MB-IPB is used to illustrate the attempt.   Keywords: Sustainable Business Competitiveness, Triple Bottom Line, MB-IPB, 3Ps   /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;}

Design Thinking and Organizational Development: twin concepts enabling a reintroduction of democratic values in organizational change

OpenAIRE

Eneberg, Magnus; Svengren Holm, Lisbeth

2013-01-01

Design Thinking is a rather new concept for increasing innovation capabilities in organizations. Organizational Development is a concept from the 1950s aiming at modernizing organizations through participatory methods. As organizations struggle with constant change and to become more innovative we will compare and discuss design thinking and organizational development and explore what we can learn from these concepts that have many similar aspects. Design is argued to be moving into new te...

Flight Test Evaluation of an Unmanned Aircraft System Traffic Management (UTM) Concept for Multiple Beyond-Visual-Line-of-Sight Operations

Science.gov (United States)

Johnson, Marcus; Jung, Jaewoo; Rios, Joseph; Mercer, Joey; Homola, Jeffrey; Prevot, Thomas; Mulfinger, Daniel; Kopardekar, Parimal

2017-01-01

This study evaluates a traffic management concept designed to enable simultaneous operations of multiple small unmanned aircraft systems (UAS) in the national airspace system (NAS). A five-day flight-test activity is described that examined the feasibility of operating multiple UAS beyond visual line of sight (BVLOS) of their respective operators in the same airspace. Over the five-day campaign, three groups of five flight crews operated a total of eleven different aircraft. Each group participated in four flight scenarios involving five simultaneous missions. Each vehicle was operated BVLOS up to 1.5 miles from the pilot in command. Findings and recommendations are presented to support the feasibility and safety of routine BVLOS operations for small UAS.

Development of concepts for low-cost energy storage assemblies for annual cycle energy system applications

Science.gov (United States)

Alexander, G. H.; Cooper, D. L.; Cummings, C. A.; Reiber, E. E.

1981-10-01

Low cost energy storage assemblies were developed. In the search for low overall cost assemblies, many diverse concepts and materials were postulated and briefly evaluated. Cost rankings, descriptions, and discussions of the concepts were presented from which ORNL selected the following three concepts for the Phase 2 development: (1) a site constructed tank with reinforced concrete walls formed with specialized modular blocks which eliminates most concrete form work and provides integral R-20 insulation designated ORNLFF; (2) a site constructed tank with earth supported walls that are formed from elements common to residential, in-ground swimming pools, designated SWPL; (3) and a site assembled tank used in underground utility vaults, designated UTLBX. Detailed designs of free standing versions of the three concepts are presented.

A Semantic Representation Of Adult Learners' Developing Conceptions Of Self Realisation Through Learning Process

DEFF Research Database (Denmark)

Badie, Farshad

2016-01-01

based on educational informatics. I shall draw your attention to the fact that in information sciences an ontology is described as an explicit (and formal) specification of a shared conceptualisation on the domain of interest. Ontologies of a thing/phenomenon support different researchers in providing......Learning is the reflective activity that enables the learner to draw upon her/his previous experiences and background knowledge to conceptualise, realise, understand and evaluate the present, so as to shape her/his future actions and to construct and develop new knowledge for her(him)self. Learning....... This research will conceptually focus on multiple categories through the adult learners’ developing conceptions of learning. The focus will be on different categories from the basic conceptions to excellent ones. I will take an appropriate model of students’ developing conceptions of learning into my...

The ExaVolt Antenna: Concept and Development Updates

Directory of Open Access Journals (Sweden)

Pfendner Carl

2017-01-01

Full Text Available A flux of ultrahigh energy neutrinos is expected both directly from sources and from interactions between ultrahigh energy cosmic rays and the cosmic microwave background. Using the cost-effective radio Cherenkov technique to search for these neutrinos, the ExaVolt Antenna (EVA is a mission concept that aims to build on the capabilities of earlier radio-based balloon-borne neutrino detectors and increase the sensitivity to lower energies and fluxes. The novel EVA design exploits the surface of the balloon to provide a focusing reflector that aims to provide a signal gain of ~ 30 dBi (compared to 10 dBi on ANITA. This increase in gain when combined with a large instantaneous viewing angle will yield a 10-fold increase in sensitivity and will allow this balloon-borne experiment to probe the expected low neutrino fluxes even at energies greater than 1019 eV. This contribution will present an overview of the mission concept, recent technology developments, and the results of a hang test of a 1:20-scale model which demonstrates the effectiveness of the design.

Concept development of "compassion fatigue" in clinical nurses: Application of Schwartz-Barcott and Kim's hybrid model

Directory of Open Access Journals (Sweden)

Mahdieh Sabery

2017-06-01

Full Text Available Compassion fatigue is not a new concept in nursing; yet, it is not well known and there is no fixed clear definition of the term. The ambiguity surrounding how to define compassion fatigue has challenged its measurement and evaluation. Thus, any attempt to determine attributes of this underdeveloped concept and studying it in a new socio-cultural context requires concept development. The purpose of this study is to clarify the concept of compassion fatigue through concept development and to produce a vivid and tentative definition of this concept in clinical practice. Concept development was conducted using a three-step hybrid concept analysis including theoretical, fieldwork, and final analysis phases according to Schwartz-Barcott and Kim's method. We reviewed and analyzed 48 articles that met the inclusion criteria. Following, the first author conducted 13 interviews with clinical nurses followed by an inductive content analysis. Finally, a comprehensive definition of compassion fatigue in nurses was attained. Compassion fatigue in nurses can be explained as a cumulative and progressive process of absorption of the patient’s pain and suffering formed from the sympathetic and caring interactions with the patients and their families. The physical, emotional, intellectual, spiritual, social, and organizational consequences of compassion fatigue are so extensive that they threaten the existential integrity of the nurse. Context-based variables (culture, family, and community such as personality features like devotion behaviors and commitment towards the patient, exposure to multiple stressors, organizational challenges, and lack of self-care are factors associated with an increased risk of compassion fatigue. Concept development of compassion fatigue is the first step in the protection of nurses against the destructive consequences of compassion fatigue and to improve quality of care.

Development of an innovative low temperature heat supply concept for a new housing area

OpenAIRE

Schmidt, Dietrich; Kallert, Anna; Orozaliev, Janybek; Best, Isabelle; Vajen, Klaus; Reul, Oliver; Bennewitz, Jochen; Gerhold, Petra

2017-01-01

The domestic energy demand of buildings is responsible for one third of the world's final energy consumption. To increase the sustainability of new housing areas, the identification of innovative heat supply concepts based on renewable energy sources (RES) is required. For the new housing area “Zum Feldlager” (Kassel, Germany), various supply concepts are studied. Main objective is the development of an innovative and efficient supply concept based on RES and low temperature district heating ...

Development Value Chains meet Business Supply Chains : The concept of Global Value Chains unraveled

NARCIS (Netherlands)

S. Drost (Sarah); J.C.A.C. van Wijk (Jeroen); S.R. Vellema (Sietze)

2011-01-01

textabstractValue chain promotion is considered a key element of private sector development strategies and pro-poor growth. However, (value) chain concepts are rather complex and unclear. This paper unravels the concept of global value chains and studies the diversity of key value chain-related

New concept for a compact tape transport system

International Nuclear Information System (INIS)

Mlekodaj, R.L.; Zganjar, E.F.; Cole, J.D.

1980-01-01

A new concept in tape transport systems for the collection and counting of radioactive samples from an on-line isotope separator has been developed. This new compact design was motivated by space limitations but important additional improvements over previous designs were made in cost, simplicity and vacuum quality. The system is based on a continuous loop of 6.5 millimeter wide recording tape 116 meters long with a conducting coating on one side for beam current monitoring. One small stepping motor is required for operation

Formalizing the concept phase of product development

NARCIS (Netherlands)

Schuts, M.; Hooman, J.

2015-01-01

We discuss the use of formal techniques to improve the concept phase of product realisation. As an industrial application, a new concept of interventional X-ray systems has been formalized, using model checking techniques and the simulation of formal models. cop. Springer International Publishing

Professional development strategies for teaching urban biology teachers to use concept maps effectively

Science.gov (United States)

McGregor Petgrave, Dahlia M.

Many teachers are not adequately prepared to help urban students who have trouble understanding conceptual ideas in biology because these students have little connection to the natural world. This study explored potential professional development strategies to help urban biology teachers use concept maps effectively with various topics in the biology curriculum. A grounded theory approach was used to develop a substantive professional development model for urban biology teachers. Qualitative data were collected through 16 semi-structured interviews of professional developers experienced in working with concept maps in the urban context. An anonymous online survey was used to collect quantitative data from 56 professional developers and teachers to support the qualitative data. The participants were from New York City, recruited through the NY Biology-Chemistry Professional Development Mentor Network and the NY Biology Teachers' Association. According to the participants, map construction, classroom applications, lesson planning, action research, follow-up workshops, and the creation of learning communities are the most effective professional development strategies. The interviewees also proposed English language learning strategies such as picture maps, native word maps, and content reading materials with underlined words. This study contributes to social change by providing a professional development model to use in planning workshops for urban teachers. Urban teachers improve their own conceptual understanding of biology while learning how to implement concept mapping strategies in the classroom. Students whose teachers are better prepared to teach biology in a conceptual manner have the potential of growing into more scientifically literate citizens.

Volume overload cleanup: An approach for on-line SPE-GC, GPC-GC, and GPC-SPE-GC

NARCIS (Netherlands)

Kerkdijk, H.; Mol, H.G.J.; Nagel, B. van der

2007-01-01

A new concept for cleanup, based on volume overloading of the cleanup column, has been developed for on-line coupling of gel permeation chromatography (GPC), solid-phase extraction (SPE), or both, to gas chromatography (GC). The principle is outlined and the applicability demonstrated by the

A current controlled variable delay superconducting transmission line

International Nuclear Information System (INIS)

Anlage, S.M.; Snortland, H.J.; Beasley, M.R.

1989-01-01

The authors present a device concept for a current-controlled variable delay for superconducting transmission line. The device makes use of the change in kinetic inductance of a superconducting transmission line under the application of a DC bias current. The relevant materials parameters and several promising superconducting materials have been identified

Stage line diagram: an age-conditional reference diagram for tracking development.

Science.gov (United States)

van Buuren, Stef; Ooms, Jeroen C L

2009-05-15

This paper presents a method for calculating stage line diagrams, a novel type of reference diagram useful for tracking developmental processes over time. Potential fields of applications include: dentistry (tooth eruption), oncology (tumor grading, cancer staging), virology (HIV infection and disease staging), psychology (stages of cognitive development), human development (pubertal stages) and chronic diseases (stages of dementia). Transition probabilities between successive stages are modeled as smoothly varying functions of age. Age-conditional references are calculated from the modeled probabilities by the mid-P value. It is possible to eliminate the influence of age by calculating standard deviation scores (SDS). The method is applied to the empirical data to produce reference charts on secondary sexual maturation. The mean of the empirical SDS in the reference population is close to zero, whereas the variance depends on age. The stage line diagram provides quick insight into both status (in SDS) and tempo (in SDS/year) of development of an individual child. Other measures (e.g. height SDS, body mass index SDS) from the same child can be added to the chart. Diagrams for sexual maturation are available as a web application at http://vps.stefvanbuuren.nl/puberty. The stage line diagram expresses status and tempo of discrete changes on a continuous scale. Wider application of these measures scores opens up new analytic possibilities. (c) 2009 John Wiley & Sons, Ltd.

Development of a low-level, in-line alpha counter (LLILAC)

International Nuclear Information System (INIS)

Gritzo, R.E.; Farnham, J.E.; Fowler, M.M.; Wouters, J.

1996-01-01

This is the final report of a two-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). With the increasing awareness of water contamination issues and the rising consequences of any form of contamination, real-time continuous monitoring is rapidly becoming a necessity. In particular, monitoring for the presence of any radioactive material is paramount. The most difficult of such monitoring tasks is that of detecting alpha-emitting radionuclides in water. Our development of the Low Level In-Line Alpha Counter (LLILAC) addresses the need for on-line, near real-time monitoring of alpha-emitting radionuclides in aqueous streams in a wide variety of applications. Although primarily designed as an on-line instrument for real-time applications, the detector can also be used for long-term in situ/post-closure monitoring. This detection system operates by allowing the stream to be monitored to come in contact with a large number of small rods or tubes made of scintillation material. By maximizing the surface to volume ratio of the scintillator, the response to alpha particles is favored over other types of radiation. Several configurations of scintillator and light collection schemes have been investigated to optimize the detection efficiency. We have also written several Monte Carlo codes to help to predict and understand the detector performance

The Iodine Satellite (iSAT) Hall Thruster Demonstration Mission Concept and Development

Science.gov (United States)

Dankanich, John W.; Polzin, Kurt A.; Calvert, Derek; Kamhawi, Hani

2014-01-01

The use of iodine propellant for Hall thrusters has been studied and proposed by multiple organizations due to the potential mission benefits over xenon. In 2013, NASA Marshall Space Flight Center competitively selected a project for the maturation of an iodine flight operational feed system through the Technology Investment Program. Multiple partnerships and collaborations have allowed the team to expand the scope to include additional mission concept development and risk reduction to support a flight system demonstration, the iodine Satellite (iSAT). The iSAT project was initiated and is progressing towards a technology demonstration mission preliminary design review. The current status of the mission concept development and risk reduction efforts in support of this project is presented.

On-Line Impact Load Identification

Directory of Open Access Journals (Sweden)

Krzysztof Sekuła

2013-01-01

Full Text Available The so-called Adaptive Impact Absorption (AIA is a research area of safety engineering devoted to problems of shock absorption in various unpredictable scenarios of collisions. It makes use of smart technologies (systems equipped with sensors, controllable dissipaters and specialised tools for signal processing. Examples of engineering applications for AIA systems are protective road barriers, automotive bumpers or adaptive landing gears. One of the most challenging problems for AIA systems is on-line identification of impact loads, which is crucial for introducing the optimum real-time strategy of adaptive impact absorption. This paper presents the concept of an impactometer and develops the methodology able to perform real-time impact load identification. Considered dynamic excitation is generated by a mass M1 impacting with initial velocity V0. An analytical formulation of the problem, supported with numerical simulations and experimental verifications is presented. Two identification algorithms based on measured response of the impacted structure are proposed and discussed. Finally, a concept of the AIA device utilizing the idea of impactometer is briefly presented.

A Role-Playing Game for a Software Engineering Lab: Developing a Product Line

Science.gov (United States)

Zuppiroli, Sara; Ciancarini, Paolo; Gabbrielli, Maurizio

2012-01-01

Software product line development refers to software engineering practices and techniques for creating families of similar software systems from a basic set of reusable components, called shared assets. Teaching how to deal with software product lines in a university lab course is a challenging task, because there are several practical issues that…

Development and Testing of an Unconventional Morphing Wing Concept with Variable Chord and Camber

NARCIS (Netherlands)

Keidel, D.H.K.; Sodja, J.; Werter, N.P.M.; De Breuker, R.; Ermanni, P.; Monajjemi, M.; Liang, W.

2015-01-01

Driven by the need to improve the performance and energy-efficiency of aircraft, current research in the field of morphing wings is growing in significance. The most recently developed concepts typically adjust only one characteristic of the wing. Within this paper a new concept for morphing wings

Cost and schedule estimate to construct the tunnel and shaft remedial shielding concept, Los Alamos Meson Physics Facility, Los Alamos National Laboratory, Los Alamos, New Mexico. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-11-30

The report provides an estimate of the cost and associated schedule to construct the tunnel and shaft remedial shielding concept. The cost and schedule estimate is based on a preliminary concept intended to address the potential radiation effects on Line D and Line Facilities in event of a beam spill. The construction approach utilizes careful tunneling methods based on available excavation and ground support technology. The tunneling rates and overall productivity on which the cost and project schedule are estimated are based on conservative assumptions with appropriate contingencies to address the uncertainty associated with geological conditions. The report is intended to provide supplemental information which will assist in assessing the feasibility of the tunnel and shaft concept and justification for future development of this particular aspect of remedial shielding for Line D and Line D Facilities.

Development of the Concept of Agroecology in Europe: A Review

Directory of Open Access Journals (Sweden)

Felipe Gallardo-López

2018-04-01

Full Text Available The concept of Agroecology is still not widely discussed in European countries. Therefore, the aim of this review is to present a qualitative and quantitative mixed analysis of this conceptualization based on research papers to provide initial answers to the following questions: How has the agroecology been used in terms of social movement, science and agricultural practice in the European countries? At which scales has it been applied? Which factors have influenced its application? Speech analysis and multivariable techniques are applied to systematized information. According to found results, the concept of agroecology is mainly conceived as science, then as practice and to a lesser degree as a social movement. There is a predominance of studies at plot level, with a tendency to include physical-biological factors; and at agroecosystem, regional and agri-food system levels, including designers, landscapes and consumers. There is a conceptual evolution in extensive quantitative and intensive qualitative standings when the agroecology incorporates more factors, such as economic, social, and, to a lesser extent, cultural and political, and becomes more transdisciplinary as a response to more complex phenomena that support the genesis and development of this concept. In this regard, a greater balance between its conceptions (science, practice and social movement is recommended to achieve a better dialogue between abstract and empirical levels.

Fostering Multirepresentational Levels of Chemical Concepts: A Framework to Develop Educational Software

Science.gov (United States)

Marson, Guilherme A.; Torres, Bayardo B.

2011-01-01

This work presents a convenient framework for developing interactive chemical education software to facilitate the integration of macroscopic, microscopic, and symbolic dimensions of chemical concepts--specifically, via the development of software for gel permeation chromatography. The instructional role of the software was evaluated in a study…

The Learning Disabled Adolescent: Eriksonian Psychosocial Development, Self-Concept, and Delinquent Behavior.

Science.gov (United States)

Pickar, Daniel B.; Tori, Christopher D.

1986-01-01

Using a developmental perspective, this study contrasted learning and nonlearning disabled adolescents on three variables: Erikson's stages of psychosocial development; self-concept; and delinquent behavior. The results indicated that the learning disabled subjects, due to years of failing, were unable to develop a sense of industry and…

KALIMER design concept report

Energy Technology Data Exchange (ETDEWEB)

Park, Chang Kyu; Kim, Young Cheol; Kim, Young In; Kim, Young Gyun; Kim, Eui Kwang; Song, Hoon; Chung, Hyun Tai; Hwang, Woan; Nam, Cheol; Sub, Sim Yoon; Kim, Yeon Sik; Whan, Wim Myung; Min, Byung Tae; Yoo, Bong; Lee, Jae Han; Lee, Hyeong Yeon; Kim, Jong Bum; Koo, Gyeong Hoi; Ham, Chang Shik; Kwon, Kee Choon; Kim, Jung Taek; Park, Jae Chang; Lee, Jung Woon; Lee, Yong Hee; Kim, Chang Hwoi; Sim, Bong Shick; Hahn, Do Hee; Choi, Jong Hyeun; Kwon, Sang Woon

1997-07-01

KAERI is working for the development of KALIMER and work is being done for methodology development, experimental facility set up and design concept development. The development target of KALIMER has been set as to make KALIMER safer, more economic, more resistant to nuclear proliferation, and yield less impact on the environment. To achieve the target, study has been made for setting up the design concept of KALIMER including the assessment of various possible design alternatives. This report is the results of the study for the KALIMER concept study and describes the design concept of KALIMER. The developed design concept study and describes the design concept of KALIMER. The developed design concept is to be used as the starting point of the next development phase of conceptual design and the concept will be refined and modified in the conceptual design phase. The scope of the work has been set as the NSSS and essential BOP systems. For systems, NSSS and functionally related major BOP are covered. Sizing and specifying conceptual structure are covered for major equipment. Equipment and piping are arranged for the parts where the arrangement is critical in fulfilling the foresaid intention of setting up the KALIMER design concept. This report consists of 10 chapters. Chapter 2 is for the top level design requirements of KALIMER and it serves as the basis of KALIMER design concept development. Chapter 3 summarizes the KALIMER concept and describes the general design features. The remaining chapters are for specific systems. (author). 29 tabs., 37 figs.

KALIMER design concept report

International Nuclear Information System (INIS)

Park, Chang Kyu; Kim, Young Cheol; Kim, Young In; Kim, Young Gyun; Kim, Eui Kwang; Song, Hoon; Chung, Hyun Tai; Hwang, Woan; Nam, Cheol; Sim Yoon Sub; Kim, Yeon Sik; Wim Myung Whan; Min, Byung Tae; Yoo, Bong; Lee, Jae Han; Lee, Hyeong Yeon; Kim, Jong Bum; Koo, Gyeong Hoi; Ham, Chang Shik; Kwon, Kee Choon; Kim, Jung Taek; Park, Jae Chang; Lee, Jung Woon; Lee, Yong Hee; Kim, Chang Hwoi; Sim, Bong Shick; Hahn, Do Hee; Choi, Jong Hyeun; Kwon, Sang Woon.

1997-07-01

KAERI is working for the development of KALIMER and work is being done for methodology development, experimental facility set up and design concept development. The development target of KALIMER has been set as to make KALIMER safer, more economic, more resistant to nuclear proliferation, and yield less impact on the environment. To achieve the target, study has been made for setting up the design concept of KALIMER including the assessment of various possible design alternatives. This report is the results of the study for the KALIMER concept study and describes the design concept of KALIMER. The developed design concept study and describes the design concept of KALIMER. The developed design concept is to be used as the starting point of the next development phase of conceptual design and the concept will be refined and modified in the conceptual design phase. The scope of the work has been set as the NSSS and essential BOP systems. For systems, NSSS and functionally related major BOP are covered. Sizing and specifying conceptual structure are covered for major equipment. Equipment and piping are arranged for the parts where the arrangement is critical in fulfilling the foresaid intention of setting up the KALIMER design concept. This report consists of 10 chapters. Chapter 2 is for the top level design requirements of KALIMER and it serves as the basis of KALIMER design concept development. Chapter 3 summarizes the KALIMER concept and describes the general design features. The remaining chapters are for specific systems. (author). 29 tabs., 37 figs

Developing a Curriculum to Enhance Self-Concept.

Science.gov (United States)

Helm, Estelle Bailey

1980-01-01

Good self-esteem and self-concept have a bearing on a child's performance in school. The article describes ways to recognize poor self-image in a child and suggests strategies for building self-concept. Activities listed include positive marking of papers, bibliotherapy, improvisational drama, and values clarification. (DS)

High power RF transmission line component development

International Nuclear Information System (INIS)

Hong, B. G.; Hwang, C. K.; Bae, Y. D.; Yoon, J. S.; Wang, S. J.; Gu, S. H.; Yang, J. R.; Hahm, Y. S.; Oh, G. S.; Lee, J. R.; Lee, W. I.; Park, S. H.; Kang, M. S.; Oh, S. H.; Lee, W.I.

1999-12-01

We developed the liquid stub and phase shifter which are the key high RF power transmission line components. They show reliable operation characteristics and increased insulation capability, and reduced the size by using liquid (silicon oil, dielectric constant ε=2.72) instead of gas for insulating dielectric material. They do not have finger stock for the electric contact so the local temperature rise due to irregular contact and RF breakdown due to scratch in conductor are prevented. They can be utilized in broadcasting, radar facility which require high RF power transmission. Moreover, they are key components in RF heating system for fusion reactor. (author)

High power RF transmission line component development

Energy Technology Data Exchange (ETDEWEB)

Hong, B. G.; Hwang, C. K.; Bae, Y. D.; Yoon, J. S.; Wang, S. J.; Gu, S. H.; Yang, J. R.; Hahm, Y. S.; Oh, G. S.; Lee, J. R.; Lee, W. I.; Park, S. H.; Kang, M. S.; Oh, S. H.; Lee, W.I

1999-12-01

We developed the liquid stub and phase shifter which are the key high RF power transmission line components. They show reliable operation characteristics and increased insulation capability, and reduced the size by using liquid (silicon oil, dielectric constant {epsilon}=2.72) instead of gas for insulating dielectric material. They do not have finger stock for the electric contact so the local temperature rise due to irregular contact and RF breakdown due to scratch in conductor are prevented. They can be utilized in broadcasting, radar facility which require high RF power transmission. Moreover, they are key components in RF heating system for fusion reactor. (author)

Development of ATC for High Speed and High Density Commuter Line

Science.gov (United States)

Okutani, Tamio; Nakamura, Nobuyuki; Araki, Hisato; Irie, Shouji; Osa, Hiroki; Sano, Minoru; Ikeda, Keigo; Ozawa, Hiroyuki

A new ATC (Automatic Train Control) system has been developed with solutions to realize short train headway by assured braking utilizing digital data transmission via rails; the digital data for the ATP (Automatic Train Protection) function; and to achieve EMC features for both AC and DC sections. The DC section is of the unprecedented DC traction power supply system utilizing IGBT PWM converter at all DC substations. Within the AC section, train traction force is controlled by PWM converter/inverters. The carrier frequencies of the digital data signals and chopping frequency of PWM traction power converters on-board are decided via spectral analysis of noise up to degraded mode cases of equipment. Developed system was equipped to the Tukuba Express Line, new commuter line of Tokyo metropolitan area, and opened since Aug. 2005.

Development and characterization of a cell line WAF from freshwater shark Wallago attu.

Science.gov (United States)

Dubey, Akhilesh; Goswami, Mukunda; Yadav, Kamalendra; Sharma, Bhagwati S

2014-02-01

A new epithelial cell line, WAF was developed from caudal fin of freshwater shark, Wallago attu. The cell line was optimally maintained at 28 °C in Leibovitz-15 (L-15) medium supplemented with 20 % fetal bovine serum. The cell line was characterized by various cytogenetic and molecular markers. The cytogenetic analysis revealed a diploid count of 86 chromosomes at different passages. The origin of the cell lines was confirmed by the amplification of 547 and 654 bp sequences of 16S rRNA and cytochrome oxidase subunit I genes of mitochondrial DNA, respectively. WAF cells were characterized for their growth characteristics at different temperature and serum concentration. Epithelial morphology of the cell line was confirmed using immunocytochemistry. Further cell plating efficiency, transfection efficiency and viability of cryopreserved WAF cells was also determined. Cytotoxicity and genotoxicity assessment of cadmium salts on WAF cells by MTT, NR and comet assay illustrated the utility of this cell line as an in vitro model for aquatic toxicological studies. The cell line will be further useful for studying oxidative stress markers against aquatic pollutants.

Technology Development and Design of a Hybrid Mars Ascent Vehicle Concept

Science.gov (United States)

Karp, Ashley C.; Redmond, Matt; Nakazono, Barry; Vaughan, David; Shotwell, Robert; Story, George; Jackson, Dale; Young, David

2016-01-01

Hybrid propulsion has been investigated as an enhancing technology for a Mars Ascent Vehicle (MAV) concept as part of potential Mars Sample Return (MSR) because of its high specific impulse, restartability, and the ability to operate and survive at extremely low temperatures. A new wax-based hybrid fuel formulation has been developed that could withstand the harsh and variable Mars environment protected solely by a minimal layer of passive insulation. This formulation could provide substantial energy savings for a notional lander and is critical for rover mobility. Preliminary thermal cycle testing has determined that the formulation can survive the expected temperature extremes and lifetime thermal testing is currently underway. A complete preliminary design using this new fuel formulation combined with a low temperature oxidizer such as Mixed Oxides of Nitrogen (MON30) is presented. Several key features associated with a complete hybrid MAV concept are investigated to determine their mission suitability (e.g. Thrust Vector Control and restartable ignition options). Potential challenges along a path towards developing such a system are outlined and future work is suggested as a means of technology maturation. The hybrid design presented here was the lowest Gross Lift Off Mass (GLOM) result of a 2015 Jet Propulsion Laboratory (JPL) led MAV concept study.

Strategic Lines of Communication in Development of Management and Human Skills

Directory of Open Access Journals (Sweden)

Rider Antonio Moreno Guillen

2017-02-01

Full Text Available The objective of this study is to propose strategic lines of communication in the development of managerial and human skills at the Rural School Nucleus (NER 187, Calderas parish, Bolívar municipality of Barinas state. The nature of the study was embedded in the quantitative paradigm, the type of research in the Feasible Project modality and the research design focused on a field study. The population and the sample were made up of thirty (30 teachers. For the collection of information, a questionnaire survey was designed with Likert scaling with five (05 response alternatives: Always, Almost Always, Sometimes, Almost Never and Never. The study concludes: infrequently the passive communication style is developed for the development of managerial and human skills. They consider that moderately the manager uses aggressive communication style to develop managerial skills. In addition, it lacks the use of assertive communication to develop managerial skills. Likewise, they lack technical skills, human skills and conceptual skills. These are relevant for the proposal of strategic lines in communication because it will accede to the strengthening of the managerial and human abilities of both the teacher and the school manager.

Evaluating Self-Concept and Ego Development within Erikson's Psychosocial Framework: A Formulation.

Science.gov (United States)

Hamachek, Don E.

1988-01-01

Suggests criteria developed within context of Erikson's first five psychosocial stages that may help in evaluating self-concept and ego development. To assess strengths and weaknesses in self's growth as it progresses through the stages, five behavioral expressions tables are presented, each illustrating possible behaviors and implicit attitudes…

Advances in tracking and trigger concepts

International Nuclear Information System (INIS)

Kisel, Ivan

2014-01-01

Increasing beam intensities and input data rates require to rethink the traditional approaches in trigger concepts. At the same time the advanced many-core computer architectures providing new dimensions in programming require to rework the standard methods or to develop new methods of track reconstruction in order to efficiently use parallelism of the computer hardware. As a results a new tendency appears to replace the standard (usually implemented in FPGA) hardware triggers by clusters of computers running software reconstruction and selection algorithms. In addition that makes possible unification of the offline and on-line data processing and analysis in one software package running on a heterogeneous computer farm

Self-Consistent Dynamical Model of the Broad Line Region

Energy Technology Data Exchange (ETDEWEB)

Czerny, Bozena [Center for Theoretical Physics, Polish Academy of Sciences, Warsaw (Poland); Li, Yan-Rong [Key Laboratory for Particle Astrophysics, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing (China); Sredzinska, Justyna; Hryniewicz, Krzysztof [Copernicus Astronomical Center, Polish Academy of Sciences, Warsaw (Poland); Panda, Swayam [Center for Theoretical Physics, Polish Academy of Sciences, Warsaw (Poland); Copernicus Astronomical Center, Polish Academy of Sciences, Warsaw (Poland); Wildy, Conor [Center for Theoretical Physics, Polish Academy of Sciences, Warsaw (Poland); Karas, Vladimir, E-mail: bcz@cft.edu.pl [Astronomical Institute, Czech Academy of Sciences, Prague (Czech Republic)

2017-06-22

We develop a self-consistent description of the Broad Line Region based on the concept of a failed wind powered by radiation pressure acting on a dusty accretion disk atmosphere in Keplerian motion. The material raised high above the disk is illuminated, dust evaporates, and the matter falls back toward the disk. This material is the source of emission lines. The model predicts the inner and outer radius of the region, the cloud dynamics under the dust radiation pressure and, subsequently, the gravitational field of the central black hole, which results in asymmetry between the rise and fall. Knowledge of the dynamics allows us to predict the shapes of the emission lines as functions of the basic parameters of an active nucleus: black hole mass, accretion rate, black hole spin (or accretion efficiency) and the viewing angle with respect to the symmetry axis. Here we show preliminary results based on analytical approximations to the cloud motion.

Self-Consistent Dynamical Model of the Broad Line Region

Directory of Open Access Journals (Sweden)

Bozena Czerny

2017-06-01

Full Text Available We develop a self-consistent description of the Broad Line Region based on the concept of a failed wind powered by radiation pressure acting on a dusty accretion disk atmosphere in Keplerian motion. The material raised high above the disk is illuminated, dust evaporates, and the matter falls back toward the disk. This material is the source of emission lines. The model predicts the inner and outer radius of the region, the cloud dynamics under the dust radiation pressure and, subsequently, the gravitational field of the central black hole, which results in asymmetry between the rise and fall. Knowledge of the dynamics allows us to predict the shapes of the emission lines as functions of the basic parameters of an active nucleus: black hole mass, accretion rate, black hole spin (or accretion efficiency and the viewing angle with respect to the symmetry axis. Here we show preliminary results based on analytical approximations to the cloud motion.

[Concept analysis of the nursing profession, published from 1994 to 2008].

Science.gov (United States)

Palese, A; Dante, A; Gherbezza, S; Venturato, E; Maragnolli, O; Ambrosi, E; Saiani, L

2012-01-01

Concept analysis is a research method in which concepts are examined in a logical and systematic fashion to form clear and rigorous conceptual definitions. To describe the concept analyses published between 1994 and 2008 and identify the emerging tendencies in the Nursing discipline, a two-staged study has been developed. In the first stage a systematic review of the literature was conducted: research published in the journals indexed in the MedLine, CINAHL and Cochrane databases were judged eligible, if they reported the theme of 'concept analysis' and 'nursing' in the title or in their key words and were published in English language. In the second stage, the articles that emerged were subjected to a content analysis. Some 158 concept analyses emerged, on average 10/year (range 1-22, median 11, +/- 5.6): these regarded 129 different concepts. Ninety-one (57.6%) concepts were focused on the nursing profession, while 67 (42.4%) were focused on the patients. Although in a few cases the effort made by the researchers moved toward the definition of new concepts, in others it appeared oriented toward including in Nursing some typical concepts from other disciplines, thus tracing an expansion of the domain of the Nursing discipline. Monitoring over time the concepts analysed constitutes an important research area to comprehend, both at a national and international level, the progressive evolution of the Nursing discipline.

Longitudinal development of number line estimation and mathematics performance in primary school children.

Science.gov (United States)

Friso-van den Bos, Ilona; Kroesbergen, Evelyn H; Van Luit, Johannes E H; Xenidou-Dervou, Iro; Jonkman, Lisa M; Van der Schoot, Menno; Van Lieshout, Ernest C D M

2015-06-01

Children's ability to relate number to a continuous quantity abstraction visualized as a number line is widely accepted to be predictive of mathematics achievement. However, a debate has emerged with respect to how children's placements are distributed on this number line across development. In the current study, different models were applied to children's longitudinal number placement data to get more insight into the development of number line representations in kindergarten and early primary school years. In addition, longitudinal developmental relations between number line placements and mathematical achievement, measured with a national test of mathematics, were investigated using cross-lagged panel modeling. A group of 442 children participated in a 3-year longitudinal study (ages 5-8 years) in which they completed a number-to-position task every 6 months. Individual number line placements were fitted to various models, of which a one-anchor power model provided the best fit for many of the placements at a younger age (5 or 6 years) and a two-anchor power model provided better fit for many of the children at an older age (7 or 8 years). The number of children who made linear placements also grew with age. Cross-lagged panel analyses indicated that the best fit was provided with a model in which number line acuity and mathematics performance were mutually predictive of each other rather than models in which one ability predicted the other in a non-reciprocal way. This indicates that number line acuity should not be seen as a predictor of math but that both skills influence each other during the developmental process. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Self-concept and Ego Development in Deaf Adolescents: A Comparative Study

NARCIS (Netherlands)

Gent, T. van; Goedhart, A.W.; Knoors, H.E.T.; Westenberg, P.M.; Treffers, P.D.A.

2012-01-01

Self-concept and ego development, two intertwined aspects of self-indicating well-being and social-cognitive maturation, respectively, were examined in a representative sample of deaf adolescents of normal intelligence (N = 68), using translated and adapted versions of Harter's (1988, Manual for the

PHEBUS on-line aerosol monitor development test program

International Nuclear Information System (INIS)

Sprenger, M.H.; Pentecost, C.G.

1992-03-01

EG ampersand G Idaho, Inc. developed an on-line aerosol monitor (OLAM) for the French PHEBUS Fission Product Project. Part of the development was to manufacture and test an OLAM prototype. This report presents the results of the testing which determined the mechanical integrity of the monitor at operating temperature and pressure and performed a preliminary test of the optical system. A series of twenty different tests was conducted during the prototype testing sequence. Since no leaks were detected, the OLAM demonstrated that it could provide a pressure boundary at required test conditions. The optical and electrical system also proved its integrity by exceeding the design requirement of less than 105 optical signal drift during an actual two-hour test sequence

Space station high gain antenna concept definition and technology development

Science.gov (United States)

Wade, W. D.

1972-01-01

The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

Early Vascular Ageing - A Concept in Development.

Science.gov (United States)

M Nilsson, Peter

2015-04-01

Cardiovascular disease (CVD) is a prevalent condition in the elderly, often associated with metabolic disturbance and type 2 diabetes. For a number of years, research dedicated to understand atherosclerosis dominated, and for many good reasons, this pathophysiological process being proximal to the CVD events. In recent years, research has been devoted to an earlier stage of vascular pathology named arteriosclerosis (arterial stiffness) and the new concept of early vascular ageing (EVA), developed by a group of mostly European researchers. This overview describes recent developments in research dedicated to EVA and new emerging aspects found in studies of families at high cardiovascular risk. There are new aspects related to genetics, telomere biology and the role of gut microbiota. However, there is still no unifying definition available of EVA and no direct treatment, but rather only recommendations for conventional cardiovascular risk factor control. New interventions are being developed - not only new antihypertensive drugs, but also new drugs for vascular protection - the selective angiotensin-II (AT2) agonist Compound 21 (C21). Human studies are eagerly awaited. Even new functional food products could have the potential to positively influence cardiometabolic regulation, to be confirmed.

Mind and body: concepts of human cognition, physiology and false belief in children with autism or typical development.

Science.gov (United States)

Peterson, Candida C

2005-08-01

This study examined theory of mind (ToM) and concepts of human biology (eyes, heart, brain, lungs and mind) in a sample of 67 children, including 25 high functioning children with autism (age 6-13), plus age-matched and preschool comparison groups. Contrary to Baron-Cohen [1989, Journal of Autism and Developmental Disorders, 19(4), 579-600], most children with autism correctly understood the functions of the brain (84%) and the mind (64%). Their explanations were predominantly mentalistic. They outperformed typically developing preschoolers in understanding inner physiological (heart, lungs) and cognitive (brain, mind) systems, and scored as high as age-matched typical children. Yet, in line with much previous ToM research, most children with autism (60%) failed false belief, and their ToM performance was unrelated to their understanding of. human biology. Results were discussed in relation to neurobiological and social-experiential accounts of the ToM deficit in autism.

Designing concept on lightning protection of overhead power distribution line

Energy Technology Data Exchange (ETDEWEB)

Yokoyama, Shigeru [Central Research Institute of Electric Power Industry, Kanagawa-ken (Japan)], E-mail: yokoyama@criepi.denken.or.jp

2007-07-01

The principle is shown for lightning protection of power distribution lines taking the effects of surge arresters, overhead ground wires and their combined use into consideration. Moreover an outline of a rational design method targeting direct lightning hits, induced over voltages and back flow currents from high structures. (author)

Technical and economical optimisation of overhead power distribution line lightning protection

Energy Technology Data Exchange (ETDEWEB)

Katic, N.A. [Elektrovojvodina Power Distribution Co., Nori Sad (Yugoslavia); Savic, M.S. [University of Belgrade (Yugoslavia). Faculty of Electrical Engineering

1998-05-01

The existing methodology for overhead line lightning protection design does not take into account customer and utility costs of line outages. In the paper a new concept of line lightning protection design based on economic optimisation is presented. Different tower types are analysed and for various undelivered energy participation factors optimal line design suggested. In line lightning flashover rate estimation both direct and induced surges are analysed. (author)

Development of multiphase meter using gamma densitometer concept

International Nuclear Information System (INIS)

Babelli, I.M.M.

1997-01-01

The ability to accurately predict the void fraction of the different phases flowing in a conduit is of extreme importance to the nuclear and oil industries, among others. Some of the major obstacles in performing accurate measurements result directly from the operating conditions of the system involved. The case study in this paper will focus on the issue of predicting the volumetric fraction in oil transport pipelines. Gamma densitometer utilizes the concept of gamma attenuation in matter where the magnitude of attenuation is directly related to the density of the material through which the gamma ray passes, and to the intensity of the ray itself By calibrating the gamma ray with a variety of known flow geometries, one can extrapolate the findings to cover all ranges of flow regimes present in a large horizontal pipe, typical of an oil transport pipeline. The advantage of using gamma densitometers is that it is a non-intrusive technique, relatively inexpensive and portable. Its main disadvantage is that the collimated beam of the gamma ray will produce a line averaged value and local information can not be obtained. Another disadvantage has to do with the necessity to increase the strength of the gamma source with increase in the thickness and/or density of the pipe wall which will require increased radiation protection and reduces portability

Along the line

DEFF Research Database (Denmark)

Dinesen, Cort Ross

2011-01-01

Embarking on a work of art constitutes a reduction of information – because we grasp the diversity and plurality of the manifestations we encounter by abstracting them and transforming them into manageable concepts; as we do when we draw contour lines on the landscape – they are imaginary...... and invisible but an abstraction essential for noting a difference or marking a place on a map. In the same way, a stroke in a sketch or a line in the sand is a manifestation of our ability to draw a boundary that both includes and excludes information. Where the line makes the birth of an idea visible......, it expresses through movement our tendency to mark a difference by drawing attention to and enclosing a whole series of relations that confront our preconceived notions. It is in the process of transformation in which we reduce the complexity of how we work, and rethink our ideas anew by refining the very same...

Impacts of Policies on Poverty. Relative Poverty Lines

OpenAIRE

Bellù, Lorenzo Giovanni; Liberati, Paolo

2005-01-01

This module illustrates how to define “relative” poverty lines, i.e. poverty lines based on approaches that consider the welfare position of each individual or household in relation to the welfare position of other individuals or households belonging to the same community. In particular, the module, after emphasizing the importance of the relative poverty concept in policy work, discusses two methods to define relative poverty lines: a) the “income levels” method; and b) the “income positions...

Development of an on-line radon monitoring system

International Nuclear Information System (INIS)

Guo Huiping; Shang Aiguo; Liu Junfeng; Zhou Chunlin; Di Yuming

2004-01-01

Of the actual demand by the strategic missile troops, the author has successfully developed a specially designed passive diffusion collecting chamber to collect the decay products of radon by high voltage static electricity, and using the single-chip microcomputer to reckon the radon concentration in air, which is actually a portable, continuous and automatic on-line monitoring instrument. It was made into a four-slot standard plug-in board of a NIM, and it functions as auto data memory, data process, display, over-threshold alarming and so on. (authors)

Preparation for Working Readiness Vocational Education Graduate with Self-Concept and Self-Efficacy Development

Directory of Open Access Journals (Sweden)

Novi Trisnawati

2017-09-01

Full Text Available This article aims to examine the efforts that need to be done in facing the readiness of the working world for vocational education by developing self-concept and self efficacy. The increasingly intense work competition in the current era makes vocational education graduates should prepare themselves to be better prepared in facing the world of work. This is done by developing self-concept that can be formed through the planting of strong religious values, self-confidence, self-acceptance. The more we have a positive self-concept then success will be as expected. Self-efficacy is a physiological and emotional condition, expected to increase the ability to work and adapt to the work environment more easily, because self efficacy shows the implementation of processes that have been done during the previous learning process.

Concept Design and Development Model of Underground Villas

Directory of Open Access Journals (Sweden)

Xinrong Liu

2015-08-01

Full Text Available With the rapid development of society, modern buildings have been consuming excessive amount of energy and resources. Eco-friendly building is going to be the leading style of architecture in the future. Underground villa, as a type of energy efficient architecture, has widely drawn humans’ attention. However, Chinese are still at an exploratory stage in terms of the development of underground construction. This paper describes several typical underground villas in western developed countries; briefly states the advantages and shortcomings of underground villas; discusses the design of style-planning, inner-space design, lighting and ventilation, and waterproof and fireproof of underground villas; also puts forward how to improve the living environment of underground villas. Besides, the paper suggests an innovative concept of underground living that best suits China’s market based on the merits of underground villas and the analysis upon China’s traditional cave-house. In addition, it roughly analyzes the prospect of this innovate style of dwelling in China.

The concept of transformation as resignified by high-school students

Directory of Open Access Journals (Sweden)

Michele Marcelo Silva Bortolai

2012-01-01

Full Text Available This article presents results of an investigation developed as part of a Master's Thesis (Bortolai, 2010 that aimed to report on the resignification of the concept of transformation by first-year students of a governmental high school located in the city of São Paulo (São Paulo State, Brazil. The activities selected for analyzing the reframing of this concept were, at first, performed individually by the students. Afterwards, a discussion was held among the students, together with the school teacher, to prepare a collective synthesis, pointing to more specific features of the systems before and after the transformation process. Then, two other activities were proposed that aimed to probe the redefinition, by the students, of the concept under study. This provided the data for verifying the stages of thought processes for concept formation in adolescents, along the lines of Vygotsky’s proposals (2005. It was observed that some of the students require further discussions to change their ideas in order to achieve the stage of conceptual thought, through the mobilization of their superior mental functions.

New Concepts and methods for developing shop floor control systems

DEFF Research Database (Denmark)

Lynggaard, Hans Jørgen; Bilberg, Arne; Alting, Leo

1998-01-01

concept reduces the effort for providing and operating high quality and high functionality cell control solutions for the industry. The plans for the next generation industrial shop floor and cell controllers are to develop new concepts based on more distributed systems, which are more robust and agile...... with respect to changing demands, technological advances and daily operations. The scope of these systems are a network of co-operating cells as opposed to individually operated cells which are co-ordinated in a traditionally (hierarchical planning) manner. This new approach raises new demands......An industrial research project defines models and methods for design and implementation of computer based control and monitoring systems for production cells. This is primarily documented within automated robot welding cells in the shipbuilding industry. In order to support engineering of cell...

National conception for gasification development in Bulgaria

International Nuclear Information System (INIS)

Donchev, S.; Tenev, A.

1997-01-01

In Bulgaria, as in the other East European countries the transition from centrally planned to market economy is accompanied by problems such as energy consumption efficiency, development of energy saving technologies, ecology etc. In this connection the corporation 'Overgas' started the development of 'National concept of the country gasification'. An analysis is done of the energy supply, energy and ecology efficiency and the natural gas consumption. The concept includes a program for a legal framework in the gas sector. Recently the question of energy dependence of the country became very important. It is known that Bulgaria has resources to supply only 1/4 of the energy needs. Natural gas is used now for satisfying of 16% of energy demand in the country. The participation of the country in the Balkan countries gasification projects by transition of Russian gas is considered necessary for the establishment of additional guarantees for stability and internal market supply conditions. Bulgaria has e good gas transition system, connected with the most perspective gas fields in the world but so far only 175 units in industry and energetics use natural gas due to some principle differences between inherited structure of gas consumption in Bulgaria and that in other Central and Western European countries. The absence of a clear logical approach in the price formation is one of the main reasons for the complicated situation with the gas prices. It is expected, under the currency board conditions, the tendency of a less increase in the gas prices (now around or above the market prices) and compared to the increase in other fuel prices to remain. A stabilization of the market is also expected. The energy efficiency can be improved 2-3 times by using of natural gas instead of electricity in the industry and households due to the minimal energy loss during the transportation and the greater efficiency coefficient of the natural gas combustion. In case of development of the

Development and Testing of the Solar System Concept Inventory

Science.gov (United States)

Hornstein, Seth D.; Prather, E. E.; English, T. R.; Desch, S. M.; Keller, J. M.; Collaboration of Astronomy Teaching Scholars CATS

2011-01-01

Trying to assess if our students really understand the ideas we present in class can be difficult. Concept inventories are research-validated assessment tools that can provide us with data to better understand whether we are successful in the classroom. The idea for the Solar System Concept Inventory (SSCI) was born after realizing that no concept inventory currently available covered details regarding the formation and evolution of our solar system. Topics were selected by having faculty identify the key concepts they address when teaching about the solar system and interviewing students in order to identify common naive ideas and reasoning difficulties relating to these key topics. Beginning in fall of 2008, a national multi-institutional field test began which would eventually involve nearly 2500 students and 17 instructors from 10 different institutions. After each round of testing, a group of instructors from multiple institutions around the country worked together to analyze the data and revise or eliminate underperforming questions. Each question was examined using a combination of point biserial, percent correct on the pre-test, and item difficulty to determine if the question was properly differentiating student understanding while also ensuring the question was not too easy or too hard. In this talk, I will present an overall outline of the development of the SSCI as well as the final testing results. The final version of the SSCI can be found at http://casa.colorado.edu/ hornstei/ssci/. This material is based upon work supported by the National Science Foundation under Grant No. 0715517, a CCLI Phase III Grant for the Collaboration of Astronomy Teaching Scholars (CATS). Any findings expressed in this material are those of the authors and do not necessarily reflect the views of the NSF.

Developing iPad-Based Physics Simulations That Can Help People Learn Newtonian Physics Concepts

Science.gov (United States)

Lee, Young-Jin

2015-01-01

The aims of this study are: (1) to develop iPad-based computer simulations called iSimPhysics that can help people learn Newtonian physics concepts; and (2) to assess its educational benefits and pedagogical usefulness. To facilitate learning, iSimPhysics visualizes abstract physics concepts, and allows for conducting a series of computer…

Free (Reactionless) Torque Generation - Or Free Propulsion Concept

International Nuclear Information System (INIS)

Djordjev, Bojidar

2010-01-01

The basic principle in Newtonian Mechanics is based upon equal and opposite forces. Placing the vectors of velocity, acceleration, force and momentum of interacting objects along a single line satisfies the claim it is a linear or a 1-D concept. Classical Mechanics states that there are two main kinds of motion, linear and angular motion. Similarly placing the vectors of angular velocity, angular acceleration, torque and angular momentum along a line in the case of rotation in fact brings a plane 2-D interaction to the well known 1-D Newtonian concept. This adaptation transforms Classical Mechanics into a 1-D concept as well and presents a conformation that the linear concept is the only possible one. The Laws of Conservation of Momentum and Angular Momentum are results of the 1-D concept. But the world contains 3 geometrical spatial dimensions. Within the 3-D world there can exist 1-D, 2-D and 3-D kinds of interaction. The question is how to believe that the 3-D world can really be composed of a 1-D interaction or interactions made equal to the 1-D concept only? Examine a gyroscope - the only one mechanical device that is capable of performing 3-D behavior. The problem is that a gyroscope cannot perform three permanent and unidirectional torques that are fixed in space acting about perpendicular axes. This impossibility conforms to a 1-D concept. The idea is to find a solution that can be achieved for the 3-D concept.

Flight Test Evaluation of an Unmanned Aircraft System Traffic Management (UTM) Concept for Multiple Beyond-Visual-Line-of-Sight (BVLOS) Operations

Science.gov (United States)

Johnson, Marcus; Jung, Jaewoo; Rios, Joseph; Mercer, Joey; Homola, Jeffrey; Prevot, Thomas; Mulfinger, Daniel; Kopardekar, Parimal

2017-01-01

This study evaluates a traffic management concept designed to enable simultaneous operations of multiple small unmanned aircraft systems (UAS) in the national airspace system (NAS). A five-day flight-test activity is described that examined the feasibility of operating multiple UAS beyond visual line of sight (BVLOS) of their respective operators in the same airspace. Over the five-day campaign, three groups of five flight crews operated a total of eleven different aircraft. Each group participated in four flight scenarios involving five simultaneous missions. Each vehicle was operated BVLOS up to 1.5 miles from the pilot in command. Findings and recommendations are presented to support the feasibility and safety of routine BVLOS operations for small UAS.

Effect of space structures against development of transport infrastructure in Banda Aceh by using the concept of transit oriented development

Science.gov (United States)

Noer, Fadhly; Matondang, A. Rahim; Sirojuzilam, Saleh, Sofyan M.

2017-11-01

Due to the shifting of city urban development causing the shift of city services center, so there is a change in space pattern and space structure in Banda Aceh, then resulting urban sprawl which can lead to congestion problem occurs on the arterial road in Banda Aceh, it can be seen from the increasing number of vehicles per year by 6%. Another issue occurs by urban sprawl is not well organized of settlement due to the uncontrolled use of space so that caused grouping or the differences in socioeconomic strata that can impact to the complexity of population mobility problem. From this background problem considered to be solved by a concept that is Transit Oriented Development (TOD), that is a concept of transportation development in co-operation with spatial. This research will get the model of transportation infrastructure development with TOD concept that can handle transportation problem in Banda Aceh, due to change of spatial structure, and to find whether TOD concept can use for the area that has a population in medium density range. The result that is obtained equation so the space structure is: Space Structure = 0.520 + 0.206X3 + 0.264X6 + 0.100X7 and Transportation Infrastructure Development = -1.457 + 0.652X1 + 0.388X5 + 0.235X6 + 0.222X7 + 0.327X8, So results obtained with path analysis method obtained variable influences, node ratio, network connectivity, travel frequency, travel destination, travel cost, and travel time, it has a lower value when direct effect with transportation infrastructure development, but if the indirect effect through the structure of space has a greater influence, can be seen from spatial structure path scheme - transportation infrastructure development.

Compact magnetic fusin reactor concepts

International Nuclear Information System (INIS)

Chung, K.M.

1984-01-01

Compact, high-power-density approaches to fusion power represent alternatives to main-line fusion concepts, Tokamaks and mirrors. If technological issues are resolved, theses approaches would yield small, low-cost fusion power plants. This survey reviews the principal physics and technology employed by leading compact magnetic fusion plants. (Author)

A new concept for a compact tape transport system

International Nuclear Information System (INIS)

Mlekodaj, R.L.; Zganjar, E.F.; Cole, J.D.

1981-01-01

A new concept in tape transport systems for the collection and counting of radioactive samples from an on-line isotope separator has been developed. This new compact design was motivated by space limitations but important additional improvements over previous designs were made in cost, simplicity and vacuum quality. The system is based on a continuous loop of 6.5 mm wide recording tape 116 m long with a conducting coating on one side for beam current monitoring. One small stepping motor is required for operation. (orig.)

Low cost PEMFC generator manufacturing line. The competitiveness and trustability strategy

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Valdemar Stelita; Souza, Adler de; Ferreira, Mauricio S. [NovoCell Energy Systems S.A., Santa Barbara D' Oeste, SP (Brazil)], Email: valdemar.stelita@novocell.ind.br; Muschellack, Erich [Idee Technologies Ltda, Sao Paulo, SP (Brazil)

2010-07-01

Concepts of Lean Manufacturing Lines for Polymer Electrolyte Membrane Fuel Cells (PEMFC) have been searched for the last twenty years, with no fully success so far. As this is considered around the world the last barrier to spread the hydrogen economy for universities and science institutions to the normal life of people, we at NovoCell decided six years ago to develop and test all key aspects that can help making it by a 'Low Cost, Feasible and Reliable Production Process'. The present work is a demonstration of the results we achieved, the main characteristics of the prototypes produced from the lines and that will be the base for our commercial operation starting next year. (author)

Low cost PEMFC generator manufacturing line. The competitiveness and trustability strategy

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Valdemar Stelita; Souza, Adler de; Ferreira, Mauricio S. [NovoCell Energy Systems S.A., Santa Barbara D' Oeste, SP (Brazil)], Email: valdemar.stelita@novocell.ind.br; Muschellack, Erich [Idee Technologies Ltda, Sao Paulo, SP (Brazil)

2010-07-01

Concepts of Lean Manufacturing Lines for Polymer Electrolyte Membrane Fuel Cells (PEMFC) have been searched for the last twenty years, with no fully success so far. As this is considered around the world the last barrier to spread the hydrogen economy for universities and science institutions to the normal life of people, we at NovoCell decided six years ago to develop and test all key aspects that can help making it by a 'Low Cost, Feasible and Reliable Production Process'. The present work is a demonstration of the results we achieved, the main characteristics of the prototypes produced from the lines and that will be the base for our commercial operation starting next year. (author)

Development of Smart Active Layer Sensor (I) : Theory and Concept Study

International Nuclear Information System (INIS)

Yoon, Dong Jin; Lee, Young Sup; Kwon, Jae Hwa; Lee, Sang Il

2004-01-01

This paper is the first part of the study on the development of a smart active layer (SAL) sensor, which consists of two parts. In this first part, the theory and concept of the SAL sensor is investigated, which is designed for the detection of elastic waves caused by internal cracks and damages in structures. For the development SAL sensor, (i) the basic theory of elastic waves was studied, (ii) the feasible study of the SAL as an elastic waves detection sensor using the finite element analysis (FEA) with respect to a piezoceramic disc was performed. (iii) the comparison of performances between some piezoceramic sensors and a commercial acoustic emission (AE) sensor was accomplished to ensure the applicability by the experimental means, such as a pencil lead break test. Also, the conceptional study for the SAL sensor, which can be utilized for the effective detection and locating of defects by the arrangement of regularly distributed sensors, was discussed

Faculty development of university teachers: analysis and systematization of the concept

Directory of Open Access Journals (Sweden)

Alba MADINABEITIA EZKURRA

2017-12-01

Full Text Available Faculty development of university teachers is recognized as a relevant factor for improving the quality of education in higher education institutions. However, behind this term different conceptions and practices are hiding. This article aims to analyze this concept over time and to understand deeply the complexity of their meanings, for which we will focus on socio-historical production contexts and on scientific research. To this end, it has been made a bibliographical review of the most relevant Anglo-Saxon literature in this educational field. The analysis allows us to conclude that it has been moving from an approach oriented to supporting teachers in their development as teachers, professionals and/or academics, towards another, focused on promoting effective teaching and learning processes at micro and macro level. These challenges highlight the need to foster broader visions that, beyond teachers, focus on institutions, frameworks, and infrastructures that target teaching and learning.

Separations technology development to support accelerator-driven transmutation concepts

International Nuclear Information System (INIS)

Venneri, F.; Arthur, E.; Bowman, C.

1996-01-01

This is the final report of a one-year Laboratory-Directed Research and Development (LDRD) Project at the Los Alamos National Laboratory (LANL). This project investigated separations technology development needed for accelerator-driven transmutation technology (ADTT) concepts, particularly those associated with plutonium disposition (accelerator-based conversion, ABC) and high-level radioactive waste transmutation (accelerator transmutation of waste, ATW). Specific focus areas included separations needed for preparation of feeds to ABC and ATW systems, for example from spent reactor fuel sources, those required within an ABC/ATW system for material recycle and recovery of key long-lived radionuclides for further transmutation, and those required for reuse and cleanup of molten fluoride salts. The project also featured beginning experimental development in areas associated with a small molten-salt test loop and exploratory centrifugal separations systems

Development and introduction of a modular training and qualification concept for maintenance personnel

International Nuclear Information System (INIS)

Kumpf, Thomas; Mueller, Nina; Hofbauer, Detlef

2009-01-01

The presentation entitled ''Development and Introduction of a Modular Training and Qualification Concept for Maintenance Personnel'' presents the background, concept and training modules of a reactor services training concept that was jointly elaborated by a working group consisting of the ''Maintenance manager workshop'' working panel of the VGB, the Kraftwerksschule (KWS) PowerTech Training Center, and AREVA NP GmbH in Erlangen and Offenbach. This concept is part of AREVA's comprehensive training and qualification approach which comprises inter alia extensive introduction sessions for new employees, the corporation-wide highly appreciated AREVA University as well as specialized training facilities as for example the CETIC in Chalon-sur-Saone, France and the training center in Lynchburg, USA, or the worldwide largest integration center for digital I and C equipment for safety applications in nuclear power plants in Erlangen. AREVA NP's training concept for maintenance personnel addresses not only employees from AREVA NP working in nuclear maintenance but also personnel from nuclear power plants as well as independent experts, representatives from authorities and other interest groups. (orig.)

Development of TGMS lines with improved floral traits through mutation breeding in rice

International Nuclear Information System (INIS)

Thiyagarajan, K.; Abirami, S.; Robin, S.; Manonmani, S.; Jambhulkar, S.J.

2006-01-01

Mutation breeding is now accepted as an useful means of adding valuable attributes to a variety. Plant breeders have used this tool for the improvement of some cultivated crop varieties. The current investigation is aimed to develop mutants with respect to temperature sensitivity and good floral traits for use in two line breeding. The putative Thermosensitive Genic Male Sterile lines viz,, TS 6 and CBTS 0282 were subjected to induce mutagenesis with gamma rays (300 and 350 Gy) and EMS (0.5 and 0.6%) for developing new TGMS lines with desirable floral traits. The seeds treated with gamma ray and EMS were raised in M1 generation and seeds collected from this population were raised in M2 generation as plant to progeny rows for screening the best TGMS lines with desirable floral traits. In the M2 generation a total of 469 progeny rows of CBTS 0282 and 854 progeny rows of TS 6 were raised. A population of 128, 975 plants in CBTS 0282 and 1,28,100 plants in TS 6 were raised. In M2 generation 361 sterile, uniform stable individual plants with good stigma exertion percentage and wide angle of glume opening were selected and stubble planted at HREC, Gudalur, a low temperature region. At HREC, again the same screening process was carried out and 13 stubbles with excellent stigma exertion percentage were selected and their progenies were raised in M3 generation along with control and check IR 58025 A. A total of 63 sterile and stable M3 plants with good stigma exertion percentage wider angle of glume opening excelling over the check and control were identified and raised in M4 generation along with control and check IR 58025 A. In the M4 generation a total of 16 progeny rows were found to be uniform and homozygous with good floral traits. These lines can be utilized for developing new two line hybrids

Development of the job concept of a nuclear power plant operator

International Nuclear Information System (INIS)

Alpeev, A.S.; Bukrinskii, A.M.

1994-01-01

An important conclusion drawn in the aftermath of the 1979 accident at Three Mile Island 2 in the USA, in particular, in discussions, held in Stockholm in 1980 at the International Conference on Safety Problems, of the causes of this accident, was that the plant-operator concept employed at the time in western countries had to be changed. The concept presupposed that the operator's actions must be strictly limited by instructions which supposedly encompass all possible situations associated with the accidents. The principal problem facing the operator in this concept is to identify the situation in which the appropriate instruction can be selected for immediate execution. An error in identifying the situation could influence decisively the evolution of further events in the power block of the nuclear plant, and this is precisely what happened at Three Mile Island 2. For this reason, operator training was based mainly on identifying the initial events, which corresponded to a definite sequence of the further developments owing to the technical scheme and laws of thermophysical processes. Such operator training is based on an event tree which gives a graphical representation of the probable consequences of the development of events in an accident with a given initial event. It is believed that approximately 20 initial events (tree roots) form the basic collection of events, each of which has three to seven branches, i.e., an accident can evolve in several possible directions. Every branch point on each tree is identified by a definite collection of technological parameters, according to which the operator must be able to identify the situation. Under the present concept, when the situation is identified correctly, the search for the required control instruction and its execution is a secondary process

Posthumous conception: Recent legal developments in South Africa

African Journals Online (AJOL)

the possibility of conceiving children after death is relatively new. Posthumous .... Aevitas supported the applicant's plans of posthumous conception, this is not ... posthumous conception: autonomy translates into a legal right of the surviving ...

Technological development of the Monobloc Divertor Concept

International Nuclear Information System (INIS)

DiPietro, E.; Brossa, M.; Guerreschi, U.; Suresh, D.; Cardella, A.

1992-01-01

This paper reports on a technological program devoted to the assessment of the feasibility and the qualification of the Monobloc Divertor Concept for the divertor of the NET/ITER Machine which has been developed with the joint collaboration between ENEA, the NET Team, Ansaldo DNT and Metallwerk Plansee. The basic idea guiding the development of the monobloc divertor consists in obtaining a component suitable to sustain the operation thermal loads, attaining peak values in the range of 15 MW/2 in steady state conditions, by a proper arrangement of refractory tiles (acting as an armour) directly brazed to the cooling pipes. In the first phase the main activities have been devoted to find a reliable joint between the armour and the cooling pipes. A number of candidate armour materials have been investigated chosen among the most promising CFC currently available in combination with molybdenum alloys (T2M and Mo41Re) and dispersion strengthened copper. The most relevant results of the test activity including the comparison of different brazing alloys and techniques and the evaluation of suitable NDE techniques are reported

Rural development in the European Union: the concept and the policy

Directory of Open Access Journals (Sweden)

Rosa Gallardo-Cobos

2010-12-01

Full Text Available Rural areas are key elements that underpin the social and economic European territory and shape its landscape. The rural setting is a dynamic concept, able to distinguish three stages on how the European Union (EU understands “rural”: rural as image, rural as local, and rural as a social construction. The evolution of the concept is reflected in the need to adapt the approach used to address rural issues, and consequently the political design for rural development. Thus, under the term Rural Development, the EU has included and mixed very different issues, supporting measures and equally heterogeneous financial instruments. For the purpose of supporting the European rural world the two main EU policies have come together: the agricultural and the regional policies. So, Rural Development in the EU has been navigating between the sectorial policy and the territorial policy. At a time of redefinition of European priorities and policies for 2013, territorial cohesion, rural/urban articulation, social partnership, institutional cooperation, environmental sustainability, and governance (flexible and multilevel are the fundamental elements upon which a policy should rest that is addressed to ensure the existence of a living countryside, inhabitable and friendly environment.

Developing concepts for improved efficiency of robot work preparation

OpenAIRE

Essers, M.S.; Vaneker, Thomas H.J.

2013-01-01

SInBot[1] is a large research project that focuses on maximizing the efficient use of mobile industrial robots during medium sized production runs. The system that will be described in this paper will focusses on the development and validation of concepts for efficient work preparation for cells of intelligent mobile robots that execute medium sized production runs. For a wide range of products, the machining tasks will be defined on an appropriate level, enabling control over the robots beha...

RF engineering basic concepts: S-parameters

CERN Document Server

Caspers, F

2011-01-01

The concept of describing RF circuits in terms of waves is discussed and the S-matrix and related matrices are defined. The signal flow graph (SFG) is introduced as a graphical means to visualize how waves propagate in an RF network. The properties of the most relevant passive RF devices (hybrids, couplers, non-reciprocal elements, etc.) are delineated and the corresponding S-parameters are given. For microwave integrated circuits (MICs) planar transmission lines such as the microstrip line have become very important.

MAPLE: a Canadian multipurpose reactor concept for national nuclear development

International Nuclear Information System (INIS)

Lidstone, R.F.

1984-06-01

Atomic Energy of Canada Limited, following an investigation of Canadian and international needs and world-market prospects for research reactors, has developed a new multipurpose concept, called MAPLE (Multipurpose Applied Physics Lattice Experimental). The MAPLE concept combines H 2 O- and D 2 O-moderated lattices within a D 2 O calandria tank in order to achieve the flux advantages of a basic H 2 O-cooled and moderated core along with the flexibility and space of a D 2 O-moderated core. The SUGAR (Slowpoke Uprated for General Applied Research) MAPLE version of the conept provides a range of utilization that is well suited to the needs of countries with nuclear programs at an early stage. The higher power MAPLE version furnishes high neutron flux levels and the variety of irradiation facilities that are appropriate for more advanced nuclear programs

[The concept of transcultural nursing: the analysis of its development in a Master degree dissertation].

Science.gov (United States)

Queiroz, M V; Pagliuca, L M

2001-01-01

This is an analytic-bibliographic study which analyzes the concept of nursing in Leininger's Theory and the conceptual development of Nursing presented in the master's degree dissertation chosen for this study. Barnum's model for the analysis and evaluation of theories (Barnum 1998) was used, in relation to the clarity and consistency of the concept, together with questions about Nursing. The group of statements presented in Leininger's transcultural nursing concept and in the dissertation shows what is the focus of nursing and the intrinsic relation to the process of looking after somebody, which must be developed coherently with culture. It also demonstrates that Nursing has a body of specific professional knowledge which guides the care for the client, valuing one's individuality, subjectivity and way of seeing the world. The study made it possible to validate concepts taken from the Theory of Universality and Cultural Diversity of caring and their use in the research according to the analyzed criteria.

Line facilities outline

International Nuclear Information System (INIS)

1998-08-01

This book deals with line facilities. The contents of this book are outline line of wire telecommunication ; development of line, classification of section of line and theory of transmission of line, cable line ; structure of line, line of cable in town, line out of town, domestic cable and other lines, Optical communication ; line of optical cable, transmission method, measurement of optical communication and cable of the sea bottom, Equipment of telecommunication line ; telecommunication line facilities and telecommunication of public works, construction of cable line and maintenance and Regulation of line equipment ; regulation on technique, construction and maintenance.

Toward a low-energy development concept for the Third World

Energy Technology Data Exchange (ETDEWEB)

Heierli, U

1976-02-01

The author discusses the perspectives of development concepts after the energy crisis, which caused a considerable rise in energy prices, including prices of fertilizers and other energy-intensive products, and shattered the dream of the ''industrialization of the whole world.'' He outlines approaches--for the sake of both greater efficiency in terms of input-output ratio of energy in different technologies and more equality, which cannot be achieved by energy-intensive development strategies--to a low-energy development strategy, which, of course, also implies a reduction of energy consumption in highly industrialized countries. The accent in low-energy development strategies has to be on decentralization so as to check urbanization and the consequent infrastructural demand, especially relating to transportation, and ecological disequilibrium.

Public reason as a political ideal: John Rawls’s conception

Directory of Open Access Journals (Sweden)

Pavićević Đorđe

2007-01-01

Full Text Available The article dealt with Rawlsian idea of public reason as a convergence point of his conception of political liberalism. The idea of public reason is taken as a norm of political justification a as well as a political ideal. Major lines of criticism of the Rawls' conception are also discussed in the article. The conclusion is that is possible to defend major elements of Rawls' conception against criticism along Rawlsian lines of argumentation. The thesis advocated through the text is that it is significant legacy of Rawls' conception of public reason that it discloses limitations of political ideal of liberal democracy. It is argued that one important consequence is that liberalism has to disclaim its own moral superiority in order to make political ideal viable. The other is that any particular society has to find its moral bases in public reason of particular society, that is burdened with peculiar culture and history. .

STRUCTURE LINE DETECTION FROM LIDAR POINT CLOUDS USING TOPOLOGICAL ELEVATION ANALYSIS

Directory of Open Access Journals (Sweden)

C. Y. Lo

2012-07-01

Full Text Available Airborne LIDAR point clouds, which have considerable points on object surfaces, are essential to building modeling. In the last two decades, studies have developed different approaches to identify structure lines using two main approaches, data-driven and modeldriven. These studies have shown that automatic modeling processes depend on certain considerations, such as used thresholds, initial value, designed formulas, and predefined cues. Following the development of laser scanning systems, scanning rates have increased and can provide point clouds with higher point density. Therefore, this study proposes using topological elevation analysis (TEA to detect structure lines instead of threshold-dependent concepts and predefined constraints. This analysis contains two parts: data pre-processing and structure line detection. To preserve the original elevation information, a pseudo-grid for generating digital surface models is produced during the first part. The highest point in each grid is set as the elevation value, and its original threedimensional position is preserved. In the second part, using TEA, the structure lines are identified based on the topology of local elevation changes in two directions. Because structure lines can contain certain geometric properties, their locations have small relieves in the radial direction and steep elevation changes in the circular direction. Following the proposed approach, TEA can be used to determine 3D line information without selecting thresholds. For validation, the TEA results are compared with those of the region growing approach. The results indicate that the proposed method can produce structure lines using dense point clouds.

Marketing Concept as a Tool for Development of Tourism in Kosovo

OpenAIRE

Ukaj, Fatos

2010-01-01

Using Marketing in Tourism creates a clear view about the real state of developing Tourisms offers and its effects, dealing with marketing elements through Promotion and Distribution of Tourism’s product. The purpose of using Marketing concept in Tourisms activity is to stimulate and to help the development of Tourism in Kosovo. Without successful functioning of Marketing in today’s surrounds and world’s global business, Tourism and the other business branches, would be convicted in fai...

Developing the ability to recontextualise cellular respiration : an explorative study in recontextualising biological concepts

NARCIS (Netherlands)

Wierdsma, Menno; Boersma, Kerst Th; Knippels, Marie Christine; van Oers, Bert

2016-01-01

In many science education practices, students are expected to develop an understanding of scientific knowledge without being allowed a view of the practices and cultures that have developed and use this knowledge. Therefore, students should be allowed to develop scientific concepts in relation to

Developing the ability to recontextualise cellular respiration : An explorative study in recontextualising biological concepts

NARCIS (Netherlands)

Wierdsma, M.D.M.; Boersma, K.T.; Knippels, M.C.P.J.; van Oers, Bert

2016-01-01

In many science education practices, students are expected to develop an understanding of scientific knowledge without being allowed a view of the practices and cultures that have developed and use this knowledge. Therefore, students should be allowed to develop scientific concepts in relation to

Development of real-time on-line vibration testing system for seismic experiments

International Nuclear Information System (INIS)

Horiuchi, T.; Nakagawa, M.; Kametani, M.

1993-01-01

An on-line vibration testing method is being developed for seismic experiments. This method combines computer simulation and an actuator for vibration testing of structures. A real-time, on-line testing system was developed to improve the method. In the system, the timing of the vibration testing and the computer simulation are the same. This allows time-dependent reaction forces, such as damping force, to be immediately considered in the computer simulation. The real-time system has many requirements, such as complicated matrix calculations within a small time step, and communication with outer devices like sensors and actuators through A/D and D/A converters. These functions arc accomplished by using a newly-developed, real-time controller that employs a parallel processing technique. A small structural model is used to demonstrate the system. The reliability and applicability of the system for seismic experiments can be demonstrated by comparing the results of the system and a shaking table, which are in almost agreement. (author)

Manufacturing concepts and development trends in the industrial production of microelectromechanical systems

Science.gov (United States)

Schuenemann, Matthias; Grimme, Ralf; Kaufmann, Thomas; Schwaab, Gerhard; Baeder, Uwe; Schaefer, Wolfgang; Dorner, Johann

1998-01-01

During the past few years, remarkable affords have been made for the realization of microscale sensors, actuators and microelectromechanical system. Due to advances in solid state and micromachining technologies, significant advances in designing, fabricating and testing of microminiaturized devices have been achieved at laboratory level. However, the technical and economical realization of microelectromechanical systems is considerably impeded by the lack of satisfying device technology for their industrial production. A production concept for the industrial production of hybrid microelectromechanical systems was developed and investigated. The concept is based on the resources and requirements of medium-sized enterprises and is characterized by its flexibility. Microsystem fabrication is separated into microfabrication steps performed in-house and technological steps performed by external technology providers. The modularity of the concept allows for a gradual increase in the degree of automation and the in-house production depth, depending on market capacity and financial resources. To demonstrate the feasibility of this approach, the design and realization of a microfabrication process center, which includes tasks like transport and handling, processing, cleaning, testing and storing are discussed. Special attention is given to the supply and feeding of microparts, to the necessary magazines, trays and transport systems, to the implementation of homogeneous mechanical, environmental and information interfaces, to the employment of advanced control, scheduling, and lot tracking concepts, and to the application of highly modular and cost-efficient clean production concepts.

The energy inside the concept of the sustainable development

International Nuclear Information System (INIS)

Szauer, Maria Teresa

1999-01-01

The intimately bound of two thematic basic conceptual schemes are shown: The climatic change and the paper of the energy inside the concept of sustainable development. It is presented a description of the green house effect, their causes and consequences. They are analyzed, making emphasis in the differences among the countries of the north and of the south, the consumption of natural resources, the population's growth, and the deforestation like main causes of the climatic change. Lastly is discussed the international negotiations related with the topic

Perceptions Towards On-line Banking Security: An Empirical Investigation of a Developing Country`s Banking Sector, how secure is On-line Banking

OpenAIRE

Bongani Ngwenya; Khanyisa Malufu

2012-01-01

The increase in computer crime has led to scepticism about themove made by the banks to introduce on-line banking. Someview this as a noble move which has made the banking systemmore efficient, reliable and secure, while others view it as arisky and insecure way of banking. The aim of this study wasto assess whether on-line banking in the developing countriesis secure or not. The researcher chose a descriptive-quantitativeresearch design. Data was collected using a self constructedquestionnai...

Uterine Artery Embolization for Retained Products of Conception with Marked Vascularity: A Safe and Efficient First-Line Treatment

International Nuclear Information System (INIS)

Bazeries, Paul; Paisant-Thouveny, Francine; Yahya, Sultan; Bouvier, Antoine; Nedelcu, Cosmina; Boussion, Francoise; Sentilhes, Loic; Willoteaux, Serge; Aubé, Christophe

2017-01-01

ObjectiveTo report our clinical practice regarding a case series of retained products of conception (RPOC) with marked vascularity (MV) managed with selective uterine artery embolization (UAE) as first-line treatment.MethodsThis was a monocentric, retrospective study of 31 consecutive cases of RPOC with MV diagnosed by Doppler ultrasound in the context of postpartum/postabortal bleeding. The primary outcome was the absence of rebleeding following embolization.ResultsRPOC with MV occurred after abortion in 27 out of 31 patients (87%). The time elapsed between delivery/abortion and UAE ranged from 1 to 210 days (mean 55.7 ± 45 days). Primary clinical success was achieved in 23 women (74.2%) following a single embolization. In total, 27 out of 31 women (87%) had been exclusively managed by UAE with conservative success. Although procedural success was achieved in this number, six women had a further procedure to evacuate RPOC despite procedural success. Large uterine arteriovenous (AV) shunts associated with RPOC were observed in five cases (16.1%), among which two were successfully treated after a single UAE and one after two UAEs, while hysterectomy was performed in the last two cases despite two and three UAE procedures respectively. RPOC was histologically proven in ten cases (32.2%) including four out of five cases of uterine AV shunt.ConclusionRPOC with MV can present with large uterine AV shunt, particularly in case of late management. Uterine artery embolization is an effective and safe first-line treatment, and should be evaluated for this indication in larger prospective trials.

Uterine Artery Embolization for Retained Products of Conception with Marked Vascularity: A Safe and Efficient First-Line Treatment

Energy Technology Data Exchange (ETDEWEB)

Bazeries, Paul, E-mail: paul.bazeries@chu-angers.fr; Paisant-Thouveny, Francine; Yahya, Sultan; Bouvier, Antoine; Nedelcu, Cosmina [Centre Hospitalier Universitaire d’Angers, Département d’Imagerie Diagnostique et interventionnelle (France); Boussion, Francoise; Sentilhes, Loic [Centre Hospitalier Universitaire d’Angers, Département de Gynécologie et Obstétrique (France); Willoteaux, Serge; Aubé, Christophe [Centre Hospitalier Universitaire d’Angers, Département d’Imagerie Diagnostique et interventionnelle (France)

2017-04-15

ObjectiveTo report our clinical practice regarding a case series of retained products of conception (RPOC) with marked vascularity (MV) managed with selective uterine artery embolization (UAE) as first-line treatment.MethodsThis was a monocentric, retrospective study of 31 consecutive cases of RPOC with MV diagnosed by Doppler ultrasound in the context of postpartum/postabortal bleeding. The primary outcome was the absence of rebleeding following embolization.ResultsRPOC with MV occurred after abortion in 27 out of 31 patients (87%). The time elapsed between delivery/abortion and UAE ranged from 1 to 210 days (mean 55.7 ± 45 days). Primary clinical success was achieved in 23 women (74.2%) following a single embolization. In total, 27 out of 31 women (87%) had been exclusively managed by UAE with conservative success. Although procedural success was achieved in this number, six women had a further procedure to evacuate RPOC despite procedural success. Large uterine arteriovenous (AV) shunts associated with RPOC were observed in five cases (16.1%), among which two were successfully treated after a single UAE and one after two UAEs, while hysterectomy was performed in the last two cases despite two and three UAE procedures respectively. RPOC was histologically proven in ten cases (32.2%) including four out of five cases of uterine AV shunt.ConclusionRPOC with MV can present with large uterine AV shunt, particularly in case of late management. Uterine artery embolization is an effective and safe first-line treatment, and should be evaluated for this indication in larger prospective trials.

Development Ground Fault Detecting System for D.C Voltage Line

Energy Technology Data Exchange (ETDEWEB)

Kim Taek Soo; Song Ung Il; Gwon, Young Dong; Lee Hyoung Kee [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

1996-12-31

It is necessary to keep the security of reliability and to maximize the efficiency of maintenance by prompt detection of a D.C feeder ground fault point at the built ed or a building power plants. At present, the most of the power plants are set up the ground fault indicator lamp in the monitor room. If a ground fault occurs on DC voltage feeder, a current through the ground fault relay is adjusted and the lamps have brightened while the current flows the relay coil. In order to develop such a system, it is analyzed a D.C feeder ground circuit theoretically and studied a principles which can determine ground fault point or a polarity discrimination and a phase discrimination of the line. So, the developed system through this principles can compute a resistance ground fault current and a capacitive ground fault current. It shows that the system can defect a ground fault point or a bad insulated line by measuring a power plant D.C feeder insulation resistance at the un interruptible power status, and therefore the power plant could protect an unexpected service interruption . (author). 18 refs., figs.

Tracing overhead transmission line corridors with regard to environmental and spatial qualities

Directory of Open Access Journals (Sweden)

Alenka Cof

2005-01-01

Full Text Available The article deals with possibilities for running the proposed overhead transmission line Okroglo-Italian border. The Slovene and Italian methods are shown as methods enabling consideration of environmental and spatial impact within the process of planning overhead transmission line corridors. The Slovene method consists of analyses of attractiveness and vulnerability, whereby the first considers those functional and economic factors that affect spatial attractiveness for overhead transmission lines. Thus we can assess the level of economic and functional suitability of alternative routes of the proposed 400 kilovolt overhead transmission line from transformation station Okroglo (Slovenia to Srednje, Golo Brdo and Vrtojba, three potential contact points on the Slovene–Italian border. In accordance with stipulations of the Law on spatial management vulnerability models were prepared, which were used to simulate the development’s potential negative environmental effects and to analyse suitability, which implies harmonisation of development and protection demands. Their result is a possible corridor that can be developed without significant conflicts. The Italian procedure was developed to trace the transmission line corridor from the Slovenian border to the transformation station in Udine. It was also applied on the Slovenian side. Three groups of factors were considered in the procedure: exclusion, repulsion, and attraction. The much simpler procedure enables comparisons, since it uses the same or at least similar spatial data. In conclusion a short commentary is added about the corridor concept as a planning tool.

LOGO programming contents for supporting mathematical concept development : promotion of the verbalization and imaging of figure concepts

OpenAIRE

杉野, 裕子

2014-01-01

I have been studying to show the importance of adopting a programming in the mathematical education and developed the LOGO teaching materials which is made good use of in the field of Euclidean geometry, in order to improve understanding and learning figure concepts. The present article offers a theoretical framework with consistency about my study and also new programming materials in which I embody my theory. I consider logically the system of mathematical expression with computers and espe...

Stages of socio-economic development: Shah Wali-Allah's concept of al-irtifaqat

OpenAIRE

aislahi, Abdul Azim

1989-01-01

The present paper introduces Shah Wali-Allah Dehlawi’s concept of the stages of socio-economic developments (al-irtifaqat). According to him, starting from simple primitive village life to an international community, the socio-economic development of human society can be divided into four stages. The first stage is dominated by simple economic struggle while the last stage is developed to maintain just political order on international level, to safeguard the socio-economic interests of differ...

The quest for human development and the concept of quota system ...

African Journals Online (AJOL)

It is believed that Nigeria as a nation, in the quest to achieve human development has adopted the concept of quota system. Quota system in the tertiary education ensures that all the federating units that make up Nigeria are represented in the admission process. This is necessitated by the multi-ethnic and multi-religious ...

Using Concept Mapping to Build Concept the Competence of School Principals

Directory of Open Access Journals (Sweden)

Mustamin Mustamin

2012-08-01

Full Text Available More and more the competence concept of school principals have an impact on two conditions, namely: (1 to develop the concept can complement and support each other; and (2 to develop the concept of possible contradict, giving rise to different interpretations. Therefore, this becomes the main issue researchers to identify the competence concept of school principals with adaptation of Jackson-Trochim method that is capable of illustrating the concept of competencies. Results of adaptation Jackson-Trochim method that school principals should have three types of competencies to lead the school effectively and efficiently. Kind of competencies are such as school leadership, instructional leadership, and operational leadership. Based on these results, the adaptationof Jackson-Trochim method to build the competence concept of school principals suggests this concept obtained may serve as a reference for school principals continue to build competencies in the future

Concept development for saltstone and low level waste disposal

International Nuclear Information System (INIS)

Wilhite, E.L.

1987-03-01

A low-level alkaline salt solution will be a byproduct in the processing of high-level waste at the Savannah River Plant (SRP). This solution will be incorporated into a cement wasteform, saltstone, and placed in surface vaults. Laboratory and field testing and mathematical modeling have demonstrated the predictability of contaminant release from cement wasteforms. Saltstone disposal in surface vaults will meet drinking water standards in shallow groundwater at the disposal area boundary. Planning for new Low-Level Waste (LLW) disposal could incorporate concepts developed for saltstone disposal

Using Logistic Approximations of Marginal Trace Lines to Develop Short Assessments

Science.gov (United States)

Stucky, Brian D.; Thissen, David; Edelen, Maria Orlando

2013-01-01

Test developers often need to create unidimensional scales from multidimensional data. For item analysis, "marginal trace lines" capture the relation with the general dimension while accounting for nuisance dimensions and may prove to be a useful technique for creating short-form tests. This article describes the computations needed to obtain…

Work Domain Analysis Methodology for Development of Operational Concepts for Advanced Reactors

Energy Technology Data Exchange (ETDEWEB)

Hugo, Jacques [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-05-01

This report describes a methodology to conduct a Work Domain Analysis in preparation for the development of operational concepts for new plants. This method has been adapted from the classical method described in the literature in order to better deal with the uncertainty and incomplete information typical of first-of-a-kind designs. The report outlines the strategy for undertaking a Work Domain Analysis of a new nuclear power plant and the methods to be used in the development of the various phases of the analysis. Basic principles are described to the extent necessary to explain why and how the classical method was adapted to make it suitable as a tool for the preparation of operational concepts for a new nuclear power plant. Practical examples are provided of the systematic application of the method and the various presentation formats in the operational analysis of advanced reactors.

Economic Development Benefits of New Transit Service: RiverLINE

Science.gov (United States)

2010-06-01

This report documents the economic impacts of the RiverLINE, a light rail line connecting Trenton and Camden, New Jersey. The study examined whether and how the line impacted local land use, residential property values, travel behaviors and firm perf...

Exploring teachers’ conceptions of representations in mathematics through the lens of positive deliberative interaction

Directory of Open Access Journals (Sweden)

Deonarain Brijlall

2012-12-01

Full Text Available This article reports on an exploration of teachers’ views on the meaning of mathematical representations in a democratic South Africa. We explored teachers’ conceptions of ‘mathematical representations’ as a means to promote dialogue and negotiation. These conceptions helped us to gauge how these teachers viewed representations in mathematics. Semi-structured questionnaires were administered to 76 high school mathematics teachers who were registered for an upgrading mathematics education qualification at a South African university. Common themes in teacher conceptions of representations were investigated as part of an inductive analysis of the written responses, which were considered in terms of practices that support dialogue and negotiation. Findings suggest that these conceptions are in line with progressive notions of classroom interactions such as the inquiry cooperation model. Furthermore, the findings suggest that teachers can support the development of classroom environments that promote democratic values.

Recent concepts concerning cerebral ischaemia in man and their implications in therapeutic evaluations

Energy Technology Data Exchange (ETDEWEB)

Depresseux, J C

1987-06-18

Recent concepts concerning focal cerebral ischaemia in man and resulting from the data obtained with positron emission tomography are reported. The evolutive steps in the ischaemic process are divided into: perfusion reserve; extraction reserve recruitment; ischaemic penumbra; lesional process and post-lesional developments. Circulatory and metabolic patterns corresponding to these evolutive steps are described and illustrated. The potentials of these data as guide-lines in therapeutic trial methodology are discussed.

Recent concepts concerning cerebral ischaemia in man and their implications in therapeutic evaluations

International Nuclear Information System (INIS)

Depresseux, J.C.

1987-01-01

Recent concepts concerning focal cerebral ischaemia in man and resulting from the data obtained with positron emission tomography are reported. The evolutive steps in the ischaemic process are divided into: perfusion reserve; extraction reserve recruitment; ischaemic penumbra; lesional process and post-lesional developments. Circulatory and metabolic patterns corresponding to these evolutive steps are described and illustrated. The potentials of these data as guide-lines in therapeutic trial methodology are discussed [fr

Social Situation of Development: Parents Perspectives on Infants-Toddlers' Concept Formation in Science

Science.gov (United States)

Sikder, Shukla

2015-01-01

The social situation of development (SSD) specific to each age determines regularly the whole picture of the child's life. Therefore, we need to learn about the whole context surrounding children relevant to their development. The focus of the study is to understand parent's views on infant-toddler's science concept formation in the family…

Latest developments in on- and off-line inspection of bank notes during production

Science.gov (United States)

Brown, Stephen C.

2004-06-01

The inspection of bank notes is a highly labour intensive process where traditionally every note on every sheet is inspected manually. However with the advent of more and more sophisticated security features, both visible and invisible, and the requirement of cost reduction in the printing process, it is clear that automation is required. Machines for the automatic inspection of bank notes have been on the market for the past 10 to 12 years, but recent developments in technology have enabled a new generation of detectors and machines to be developed. This paper focuses on the latest developments in both the off-line and on-line inspection of bank notes covering not only the visible spectrum but also a new range of detectors for inspection some of the more common invisible features used as covert features in today's bank notes.

Concept selection of car bumper beam with developed hybrid bio-composite material

International Nuclear Information System (INIS)

Davoodi, M.M.; Sapuan, S.M.; Ahmad, D.; Aidy, A.; Khalina, A.; Jonoobi, Mehdi

2011-01-01

Highlights: → We simulate the low impact test by Abaqus Ver16R9 using the same material model. → Six different weighted criteria were discussed to nominate the best concept. → Double Hat Profile showed the best concept to fulfil the defined PDS. → Geometric parameters may overcome the weak inherent properties of bio composite. → Toughened bio-composite material may employ in structural automotive components. -- Abstract: Application of natural fibre composites is going to increase in different areas caused by environmental, technical and economic advantages. However, their low mechanical properties have limited their particular application in automotive structural components. Hybridizations with other reinforcements or matrices can improve mechanical properties of natural fibre composite. Moreover, geometric optimizations have a significant role in structural strength improvement. This study focused on selecting the best geometrical bumper beam concept to fulfill the safety parameters of the defined product design specification (PDS). The mechanical properties of developed hybrid composite material were considered in different bumper beam concepts with the same frontal curvature, thickness, and overall dimensions. The low-speed impact test was simulated under the same conditions in Abaqus V16R9 software. Six weighted criteria, which were deflection, strain energy, mass, cost, easy manufacturing, and the rib possibility were analyzed to form an evaluation matrix. Topsis method was employed to select the best concept. It is concluded that double hat profile (DHP) with defined material model can be used for bumper beam of a small car. In addition, selected concept can be strengthened by adding reinforced ribs or increasing the thickness of the bumper beam to comply with the defined PDS.

Thermal Properties of Starch From New Corn Lines as Impacted by Environment and During Line Development

Energy Technology Data Exchange (ETDEWEB)

Lenihan, Elizabeth M [Iowa State Univ., Ames, IA (United States)

2003-01-01

The objectives of this research were to further characterize exotic by adapted corn inbreds by studying the impact of environment on their starch thermal properties, and investigating the development of starch thermal properties during kernel maturation by using differential scanning calorimetry (DSC). A method to expedite identification of unusual starch thermal traits was investigated by examining five corn kernels at a time, instead of one kernel, which the previous screening methods used. Corn lines with known thermal functions were blended with background starch (control) in ratios of unique starch to control starch, and analyzed by using DSC. Control starch was representative of typical corn starch. The values for each ratio within a mutant type were unique (α < 0.01) for most DSC measurements. These results supported the five-kernel method for rapidly screening large amounts of corn germplasm to identify unusual starch traits. The effects of 5 growing locations on starch thermal properties from exotic by adapted corn and Corn Belt lines were studied using DSC. The warmest location, Missouri, generally produced starch with greater gelatinization onset temperature (T_oG), narrower range of gelatinization (R_G), and greater enthalpy of gelatinization (ΔH_G). The coolest location, Illinois, generally resulted in starch with lower T_oG, wider R_G, and lower ΔH_G. Starch from the Ames 1 farm had thermal properties similar to those of Illinois, whereas starch from the Ames 2 farm had thermal properties similar to those of Missouri. The temperature at Ames 2 may have been warmer since it was located near a river; however, soil type and quality also were different. Final corn starch structure and function change during development and maturity. Thus, the changes in starch thermal properties during 5 stages of endosperm development from exotic by adapted corn and Corn Belt lines at two locations were

A voice-of-consumer approach in development of new seafood product concepts

NARCIS (Netherlands)

Altintzoglou, T.; Einarsdóttir, G.; Valsdóttir, T.; Schelvis, R.; Skåra, T.; Luten, J.B.

2010-01-01

This article describes a consumer-based approach for development of new seafood product concepts among young adults in Norway and Iceland. The study aim was to gain insight into how young adults determine their acceptance of seafood and make potential product choices. Additional insights measured

A LEGO paradigm for virtual accelerator concept

International Nuclear Information System (INIS)

Andrianov, S.; Ivanov, A.; Podzyvalov, E.

2012-01-01

The paper considers basic features of a Virtual Accelerator concept based on LEGO paradigm. This concept involves three types of components: different mathematical models for accelerator design problems, integrated beam simulation packages (i. e. COSY, MAD, OptiM and others), and a special class of virtual feedback instruments similar to real control systems (EPICS). All of these components should inter-operate for more complete analysis of control systems and increased fault tolerance. The Virtual Accelerator is an information and computing environment which provides a framework for analysis based on these components that can be combined in different ways. Corresponding distributed computing services establish interaction between mathematical models and low level control system. The general idea of the software implementation is based on the Service-Oriented Architecture (SOA) that allows using cloud computing technology and enables remote access to the information and computing resources. The Virtual Accelerator allows a designer to combine powerful instruments for modeling beam dynamics in a friendly way including both self-developed and well-known packages. In the scope of this concept the following is also proposed: the control system identification, analysis and result verification, visualization as well as virtual feedback for beam line operation. The architecture of the Virtual Accelerator system itself and results of beam dynamics studies are presented. (authors)

Satellite power system concept development and evaluation program system definition technical assessment report

Energy Technology Data Exchange (ETDEWEB)

1980-12-01

The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW of electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

FEDIX on-line information service: Design, develop, test, and implement an on-line research and education information service. Annual status report, September 1992--August 1993

Energy Technology Data Exchange (ETDEWEB)

Rodman, J.A.

1993-08-01

Federal Information Exchange, Inc. (FIE) is a diversified information services company that is recognized as the major electronic link between the higher education community and the Federal government in the field of research administration. FIE provides a range of information related services to the government, academic and private sectors, including database management, software development and technical support. FEDIX is the on-line information service designed, developed and implemented by FIE to accomplish the following objectives: (1). Broaden the participation of the education community in Federal research and education programs by providing free and unrestricted on-line access to information from all participating Federal agencies; and (2). Provide the education community with on-line access to a single keyword-searchable system for research and educational funding opportunities at the participating Federal agencies.

Pre-Service Physics Teachers’ Concept Mastery and the Challenges of Game Development on Physics Learning

Science.gov (United States)

Saprudin, S.; Liliasari, L.; Prihatmanto, A. S.

2017-09-01

This study is a survey that aims to describe pre-service physics teachers’ concept mastery at a university in Ternate. Data were collected through test standard instrument for physics which used in the teacher certification program. Data were analyzed by using quantitative descriptive technique. Based on the results of data analysis, it was concluded that generally pre-service physics teachers’ concept mastery can be categorized on low category (25.4%). The map of concept mastery will be used as a reference to developing game design in the physics learning context for pre-service physics teachers.

Curriculum adaptation and the role of scientific concepts on the development of people with special educational needs

Directory of Open Access Journals (Sweden)

Adriane Cenci

2013-11-01

Full Text Available This work is based on cultural-historical theory from Vygotsky and on the National Curricular Parameters - Curricular Adaptations (1998 - aiming to discuss the importance of learning scientific concepts (the concepts learned through formal/ academic education to the development of students with special educational needs. It is characterized as a theoretical essay based on bibliographical research. The discussion axis is the idea of curricular adaptation/flexibility, since there is no real inclusion without considering the individualized education to meet the specific needs of students. The importance attached to school curriculum and scientific concepts referred to it is based on the Vygotskian premise stating that the learning promotes development; according to Vygotsky, knowledge systematization and awareness enter into the child mind through the learning of scientific concepts. Due to the importance of these concepts, it is needed to be careful to think about the curricular adaptations; under the justification of adapting the teaching and curriculum to the specificities of students with special needs. The formal contents are often disregarded, assuming that they would not be within the capacity scope of students, especially those ones with more pronounced difficulties. It is concluded that learning - learning scientific concepts - promotes cognitive development; then, schooling should invest at this point. It is imperative to fight for an inclusive school in which the children, in fact, can learn, learn contents.

Development of the contemporary concept of restorative justice: Towards increased visibility of crime victims

Directory of Open Access Journals (Sweden)

Ćopić Sanja

2012-01-01

Full Text Available Contemporary concept of restorative justice emerged at the end of 1960s and the beginning of 1970s, at the time when repression and social exclusion stared to show their lacks. Restorative justice has emerged on the critics of the conventional criminal justice response to crime, which denies the power to both the victim and the offender, and particularly neglecting a victim and minimizing his/her role in the procedure. While the accent of the repressive discourse is on the crime and punishment, restorative discourse is focused on the relationship between parities involved in a criminal case, who should actively participate in the process of finding out adequate solution of the problem arose from the criminal offence. Keeping that in mind, it is quite obvious that theoretical knowledge, concepts and movements that are focused on victims, their rights, legal and overall position had the strongest impact on the development of restorative justice. Taking that as a departure point, the impact of the “conflict as property” concept, victimology, movement for the restitution, movement for victim’s rights, and feminist movement, on the development of a contemporary concept of restorative justice is analyzed in this paper, and vice versa.

Selected Topological Concepts Taught to Children, Ages Six to Nine.

Science.gov (United States)

Shah, Sair Ali

The research reported dealt with the ability of first, second, and third grade students to understand the topological concepts of solids, sheets, lines, networks, and of order and betweenness. The concepts were presented through the use of manipulative materials. The instruction was conducted by the regular teachers for a period of three weeks…

Analysis of some coplanar transmission lines: coplanar coupled lines, coplanar coupled striplines, and coplanar coupled lines with rectangular microshield

Science.gov (United States)

Yuan, Naichang; He, Jianguo; Yao, Demiao; Dai, Qin; Lin, Weigan

1995-06-01

Two types of coplanar transmission lines, rectangular microshield coplanar coupled lines (RMCCL) and coplanar coupled rectangular microshield lines (CCRML), are proposed for MMIC applications. These are developed from coplanar coupled lines (CCL) and coplanar coupled strip lines (CCS). Analytic formulas are presented for calculating the quasistatic TEM parameters of these coupled lines by means of exact conformal mapping techniques. Numerical results are also presented to illustrate the properties of these coplanar transmission lines.

DEVELOPMENT OF MELON F1 SEEDS BASED ON LINES WITH GENIC MALE STERILITY

Directory of Open Access Journals (Sweden)

A. S. Sokolov

2014-01-01

Full Text Available The perspective technology of development of melon of F1hybrids seeds by use maternal lines with an original form of genic mail sterility and marker trait (lobed leaves was studied. Elements of technology allow developing hybrid seeds of melon with hybridity of 90-95%.

Design and development of line type modulators for high impedance electron gun

Energy Technology Data Exchange (ETDEWEB)

Dixit, Kavita P.; Tillu, Abhijit; Chavan, Ramchandra; Yadav, Vivek; Sarukte, Hemant, E-mail: kavidi@barc.gov.in [Accelerator and Pulse Power Division, Bhabha Atomic Research Centre, Mumbai (India)

2014-07-01

Conventional line type modulators are routinely used for powering pulsed power microwave devices such as magnetrons and klystrons used for radar, medical and scientific applications. The load impedance (operating point) is fairly well defined in these cases, and makes the design of the discharging circuit of the modulator straight forward. This paper describes the Line type modulators that have been developed and being routinely used for powering the Triode Electron Gun of industrial electron linacs. The beam parameters of such guns are user defined and the pulse current varies from few mA to 800mA (typ). The beam energies requirement varies from 40 keV to 80 keV. Hence the impedance offered by the electron gun to the power source (modulator) is not well defined. The load capacitance which is inclusive of the various stray capacitances along with the intrinsic gun capacitance is ∼ 200-400 pF. This capacitance, which depends on the configuration, shunts the load and makes the effective load highly capacitive with the resistive part varying over a wide range. The paper describes the design and development of conventional line type modulators for powering Electron gun load of the type described above. (author)

Sustainable Development in the EU: Redefining and Operationalizing the Concept

Directory of Open Access Journals (Sweden)

Sander R.W. van Hees

2014-05-01

Full Text Available Although sustainable development plays an important role in EU law, neither EU law nor EU policy clearly explains what the concept means and how it must be put into practice. Policy-makers, NGOs, politicians and businesses do, however, need guidance on sustainable development for the purpose of good policy-making, for effectively holding the EU accountable, and for the design of CSR programmes. To that end, this article will first explain the guidance which EU law and policy already offer on sustainable development. Subsequently, this article will propose (I a more workable definition of sustainable development than the one (the Brundtland definition which is currently used, and (II a framework of application for sustainable development. This framework of application (which will have the form of a sustainability impact assessment provides practical guidance for policy-makers, politicians, NGOs and businesses when dealing with sustainable development in their day-to-day work.

Concepts for the Development of a Customizable Checklist for Use by Patients.

Science.gov (United States)

Fernando, Rohesh J; Shapiro, Fred E; Rosenberg, Noah M; Bader, Angela M; Urman, Richard D

2015-06-10

Checklists are tools that are developed to complete tasks by drawing on specific and relevant knowledge and supporting communication at critical times. If checklists were designed specifically for patient use, they could promote patient engagement, potentially leading to improved quality of care. Physicians of all specialties, nurses, patients, patient advocates, and administrators can take an active role in checklist development and dissemination. Our method to investigate concepts in developing a customizable patient checklist included a literature search concerning existing checklists and resources currently available to patients. Literature containing expert opinion regarding checklists, professional organization statements, and patients and providers were consulted. A template for designing a patient checklist was developed incorporating methods from previous literature and resources regarding checklists. This template includes a development, drafting, and validation phase. Sample content for inclusion in potential checklists for patients with diabetes and patients undergoing anesthesia was devised. Developed by physicians with input from patients and other involved health-care providers such as nurses, this relatively novel concept of a patient's checklist creates a role for the patient to ensure their own safety. With increasing attention to high-quality and cost-effective health care, patient satisfaction surveys will be assessed to rate overall health care. Further development of checklists will need to be guided by specific medical conditions and acceptance by patients and providers. Providers can use these checklists as a method to gauge a patient's understanding of an intervention, solidify the patient-doctor relationship, and improve patient safety.

The Development of an Assessment Tool: Student Knowledge of the Concept of Place Value

Science.gov (United States)

Major, Karen

2012-01-01

The importance of student understanding of the concept of place value cannot be underestimated. Place value is a "gate keeper" in developing mathematical understanding. The purpose of this study was to examine and develop a teacher-made test of place value knowledge. The questions were developed using the progressions from the Number…

The Needs Analysis in Self-Concept Module Development

Science.gov (United States)

Yusop, Yusni Mohamad; Sumari, Melati; Mohamed, Fatanah; Said, Shahriza; Azeez, Mohd Ibrahim K.; Jamil, Mohd Ridhuan Mohd

2015-01-01

This research studies needs analyses conducted to examine the need for a self-concept module. Two types of analyses had been conducted; content analysis and experts' consensus. Content analysis was conducted to explore the issues of self-concept from the theory and literature perspective. Later, needs analysis had also been carried out to observe…

Analysis of stratification effects on mechanical integrity of pressurizer surge line

International Nuclear Information System (INIS)

Thomas-Solgadi, E.; Taupin, P.; Ensel, C.

1992-01-01

Unexpected thermal movements in pressurizer surge lines have been reported by several PWR operating utilities. Sometimes gaps between pipe and pipe whip restraints can become closed and plastic deformations could result. Moreover these movements, which have not been considered at conception, can induce additional stresses, and design limits on fatigue and stresses may be exceeded. These piping movements are caused by thermal stratification phenomenon in the horizontal part of the surge line (difference of temperature between hot leg and pressurizer varying from 30 C to above 160 C). To assess the mechanical consequences of this 3-dimensional phenomenon, FRAMATOME has developed a computer program using simplified models (1 and 2-dimensional). This method integrates past investigations on thermal-hydraulic variation of the stratification based on plant monitoring programs carried out by FRAMATOME since 1981, and based also on thermal-hydraulic tests and thermal-hydraulic computer code results. The methodology developed by FRAMATOME permits the following calculations: movements of the line in the elastic and plastic domains; stresses (Mises criterion -- calculations in compliance with ASME or RCC-M codes); usage factors in different components (elbows, welds, ...); crack propagation taking into account stratification and plastic shakedown

Effects of professional development seminars on role conception, role deprivation, and self-esteem of generic baccalaureate students.

Science.gov (United States)

Lengacher, C A

1994-01-01

This study compared differences in role conception (professional, bureaucratic, and service), role deprivation, and self-esteem among baccalaureate students enrolled in specially designed professional development seminars. More than 100 students participated in the pretests, given on entry to the program, of which 63 completed both the pretest and the posttest given on program exit. The Corwin Role Conception Scale assessed role conceptions and role deprivation and the Coopersmith Adult Form Self-Esteem Inventory assessed self-esteem. Statistically significant differences were found within groups in bureaucratic role conceptions (P = .0009) and self-esteem (P = .0019) and between groups in professional role conception (P = .0057). No differences were found between or within groups for service role conception or role deprivation.

“Pick-up Lines”: A Fun Way to Facilitate Learning Microbiological Concepts

Directory of Open Access Journals (Sweden)

Thomas Edison E. dela Cruz

2014-05-01

Full Text Available Learning microbiology can be made fun by writing funny lines related to microbiology. Students were tasked to create their own pick-up lines and explain these based on their understanding of the basic concepts in microbiology.

Developing an expert system to control a beam line at the Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Clearwater, S.H.; Papcun, G.; Clark, D.A.

1985-01-01

High energy particle experiments require an accelerator as a source of high energy particles. To increase the productivity of an accelerator facility, we wish to develop an expert system to control beam lines. Expert Systems are a branch of Artificial Intelligence where a computer program performs tasks requiring human expertise. Unlike most expert systems we have a physical model underlying our beam line and this model can be used with the expert system to improve performance. The development of the expert system will lead to an increased understanding of the beam line as well as the possibility of state-of-the-art expert system building

SkyMouse: A smart interface for astronomical on-line resources and services

OpenAIRE

CUI, Chen-Zhou; SUN, Hua-Ping; ZHAO, Yong-Heng; LUO, Yu; QI, Da-Zhi

2007-01-01

With the development of network and the World Wide Web (WWW), the Internet has been growing and changing dramatically. More and more on-line database systems and different kinds of services are available for astronomy research. How to help users find their way through the jungle of information services becomes an important challenge. Although astronomers have been aware of the importance of interoperability and introduced the concept of Virtual Observatory as a uniform environment for future ...

Design and development of graphite/epoxy feed line for use of cryogenic propulsion systems

International Nuclear Information System (INIS)

Kremer, J.S.; Kreiner, J.H.; Mosallam, A.S.

1998-01-01

The development of lightweight composite cryogenic ines is a critical technology for single-stage-to-orbit launch vehicles such as the Reusable Launch Vehicle (RLV). To achieve weight goals, a significant effort will be required to develop feed line designs that can reliably replace today's stainless steel configurations. A number of technical problems exist, including the large coefficient of thermal expansion (CTE) differential between the composite and interfacing metallic materials and the ability to seal against composite materials in a cryogenic environment. This paper reports the results of a development efforts undertaken to design, build, and test a graphite/epoxy propellant feed line to carry liquid hydrogen (-423 degree F). The design incorporates a reusable cryogenic insulation system and a secondarily bonded/co-cured splice joint

Development of high level radwaste treatment and conversion technology. Transmutation technology development

Energy Technology Data Exchange (ETDEWEB)

Park, Won Suk; Song, T Y; Kim, Y H

2001-03-01

The final disposition of spent fuel has been, and continues to be, an important issue of nuclear industry. The conceptual design for the accelerator driven transmutation system HYPER is scheduled to be completed by the year of 2006. As the first step for the conceptual design, a study to determine 1. sub-critical core characteristics, 2. fuel concept, 3. coolant system concept, 4. spallation target concept for the HYPER was performed from 1997 to 2000. Most of concept studies were done on the literature basis. The major objectives of the study is to give a guid-line for the second stage research which will be performed during 2001-2003. In addition, the technologies related with TRU-Zr fuel and Pb-Bi coolant can be utilized for the future nuclear reactor development such as generation 4.

Development of high level radwaste treatment and conversion technology. Transmutation technology development

International Nuclear Information System (INIS)

Park, Won Suk; Song, T. Y.; Kim, Y. H.

2001-03-01

The final disposition of spent fuel has been, and continues to be, an important issue of nuclear industry. The conceptual design for the accelerator driven transmutation system HYPER is scheduled to be completed by the year of 2006. As the first step for the conceptual design, a study to determine 1. sub-critical core characteristics, 2. fuel concept, 3. coolant system concept, 4. spallation target concept for the HYPER was performed from 1997 to 2000. Most of concept studies were done on the literature basis. The major objectives of the study is to give a guid-line for the second stage research which will be performed during 2001-2003. In addition, the technologies related with TRU-Zr fuel and Pb-Bi coolant can be utilized for the future nuclear reactor development such as generation 4

A new concept for the control of a slow-extracted beam in a line with rotational optics, 2

CERN Document Server

Benedikt, Michael; Pullia, M

1999-01-01

For pt.I see ibid., vol.430, p.512-22, 1999. The current trend in hadron therapy is towards high-precision, conformal scanning of tumours with a `pencil' beam of light ions or protons, delivered by a synchrotron using slow extraction. The particular shape of the slow- extracted beam segment in phase space and the need to vary the beam size in a lattice with rotating optical elements create a special problem for the design of the extraction transfer line and gantry. The design concept presented in this report is based on telescope modules with integer- pi phase advances in both transverse planes. The beam size in the plane of the extraction is controlled by altering the phase advance and hence the rotation of the extracted beam segment in phase space. The vertical beam size is controlled by stepping the vertical betatron amplitude function over a range of values and passing the changed beam size from `hand-to-hand' through the telescope modules to the various treatment rooms. In the example given, a combined p...

A New Concept for the Control of a Slow-Extracted Beam in a Line with Rotational Optics, 2

CERN Document Server

Benedikt, Michael; Pullia, M

1999-01-01

The current trend in hadrontherapy is towards high-precision, conformal scanning of tumours with a 'pencil' beam of light ions, or protons, delivered by a synchrotron using slow-extraction. The particular shape of the slow-extracted beam segment in phase space and the need to vary the beam size in a lattice with rotating optical elements create a special problem for the design of the extraction transfer line and gantry. The design concept presented in this report is based on telescope modules with integer-p phase advances in both transverse planes. The beam size in the plane of the extraction is controlled by altering the phase advance and hence the rotation of the extracted beam segment in phase space. The vertical beam size is controlled by stepping the vertical betatron amplitude function over a range of values and passing the changed beam size from 'hand-to-hand' through the telescope modules to the various treatment rooms. In the example given, a combined phase-shifter and 'stepper', at a point close to ...

Communist heritage tourism and red tourism : concepts, development and problems

OpenAIRE

Caraba, Cosmin Ciprian

2011-01-01

"Communist heritage tourism and red tourism: concepts, development and problems. The second part of the 20th century has been marked by the competition between capitalism and communism. The “Autumn of Nations” put an end to the Eastern Bloc, but each former communist country in Central and Eastern Europe still possesses heritage sites reminding of the communist period. These heritage sites are turning into major tourist attractions, being sought by western tourists. Halfway around the worl...

Analysis of chemical concepts as the basic of virtual laboratory development and process science skills in solubility and solubility product subject

Science.gov (United States)

Syafrina, R.; Rohman, I.; Yuliani, G.

2018-05-01

This study aims to analyze the concept characteristics of solubility and solubility products that will serve as the basis for the development of virtual laboratory and students' science process skills. Characteristics of the analyzed concepts include concept definitions, concept attributes, and types of concepts. The concept analysis method uses concept analysis according to Herron. The results of the concept analysis show that there are twelve chemical concepts that become the prerequisite concept before studying the solubility and solubility and five core concepts that students must understand in the solubility and Solubility product. As many as 58.3% of the definitions of the concepts contained in high school textbooks support students' science process skills, the rest of the definition of the concept is memorized. Concept attributes that meet three levels of chemical representation and can be poured into a virtual laboratory have a percentage of 66.6%. Type of concept, 83.3% is a concept based on principle; and 16.6% concepts that state the process. Meanwhile, the science process skills that can be developed based on concept analysis are the ability to observe, calculate, measure, predict, interpret, hypothesize, apply, classify, and inference.

Flexible maintenance system (FMS). Background, concept, and results of technical development

International Nuclear Information System (INIS)

Yoshikawa, Hidekazu; Watanabe, Osami; Takizawa, Yoji; Ohga, Yukiharu; Ohi, Tadashi

2006-01-01

Maintenance works of nuclear power plants have been involved with various people and organizations. Thus human errors are apt to be made. Since 2000, the project on development of flexible maintenance system (FMS) has been conducted for five years in order to make maintenance works more rational and reduce human errors probability. Background, concept and results of technical development to upgrade maintenance works and training are reviewed. Advanced technology such as optical viewing equipments, laser holography inspection systems and neural networks shall be applied to maintenance works. (T. Tanaka)

The place of the CT scan in the three concept view (TCV) of the low back syndrome

International Nuclear Information System (INIS)

Geldermann, P.W.

1982-01-01

From the historical lines along which our thinking about low back pain developed, three concepts can be deduced: radicular, stenotic and axial. The patient with a low back pain syndrome (LBS) should be seen with this three concept view (TCV) in mind. Modern insight into the degenerative process of the low back support this concept. The clinical syndromes illustrating these concepts, radicular syndromes, Neurogenic Peripheral Intermittent Claudication (NPIC), and axial low back pain, can intermingle. To determine the place of the CT scan in the process of diagnosis of the LBS, we carried out a total of 56 CT-examinations on about 200 low back patients with various indications. The results are discussed. In addition to radiological suppositions, NPIC plays an important part in deciding whether or not to perform a CT scan. (Author)

Theoretical Analysis of Occupational Development Aspects from the Viewpoint of the Personality's Constant Individual Traits Concept

Science.gov (United States)

Wilsz, Jolanta

2015-01-01

The concept of personality's constant individual traits and its significance, as well as implications for problems connected with choosing an occupation have been presented in the paper. Selected theories of occupational development have been analyzed from the concept viewpoint and certain traits of occupational personality presented by authors of…

Radiation sterilization of medical supplies: conceptions, regulations, present status and further developments

International Nuclear Information System (INIS)

Peteu, Gh.

1994-01-01

A general view on the present stage and tendencies in the development of radiation sterilization of biomedical supplies is presented. Specific concepts in correlation with some regulations of the World Health Organization and of the National Public Health Authorities concerning the present state, the possibilities and criteria of development in our country, are discussed. Finally the present status of the design and execution of the project of two mobile and multipurpose irradiators is presented. (Author)

Development of an on-line tritium monitor with gamma-ray rejection and energy discrimination

International Nuclear Information System (INIS)

Cox, S.A.; Yule, T.J.; Bennett, E.F.

1981-01-01

With the prospect of large fusion facilities coming on-line in the not-too-distant future, it is becoming increasingly important that an on-line tritium-monitoring system be developed which is capable of detecting small amounts of released tritium. Since tritium oxide is some 400 times as hazardous as elemental tritium, it is necessary to distinguish between the two in order to properly evaluate the hazard. Presently available on-line instrumentation has marginal sensitivity, is unable to distinguish between the two forms of tritium, and has poor discrimination against background gamma radiation and air activation products. The objective of our program is to develop a monitoring system with the capability of distinguishing between the two forms of tritium, detecting tritium with a sensitivity of a fraction of an MPC/sub a/ (1 MPC/sub a/ = 5. x 10 - 6 Ci/M 3 ) for the oxide, and discriminating against gamma activity and airborne activity other than tritium

Republic of Korea. Closure concept development for LILW disposal facility in Republic of Korea

International Nuclear Information System (INIS)

2001-01-01

Nuclear Environment Technology Institute (NETEC) of Korea Electric Power Corporation (KEPCO) is developing near surface disposal concepts for both a rock cavern type disposal facility, and a vault type facility; two types of facility are being considered to provide more options for LILW repository siting. The conceptual design for the vault type facility will be completed in 1999. As a part of conceptual design effort, a preliminary concept for the disposal facility closure has been identified

Recent developments in engineering and technology concepts for prospective tokamak fusion reactors

International Nuclear Information System (INIS)

Ford, G.W.K.

1987-01-01

The tokamak has become the most developed magnetic fusion system and it appears likely that break-even and possibly ignition will first be demonstrated in existing machines of this type. Yet larger tokamaks could also demonstrate the essential technologies for the production of useful power. World-wide, well over a hundred tritium-breeder/heat-removal blanket concepts have been devised and preliminary engineering design studies undertaken, but the effort deployed on breeding and power recovery systems has been very small compared with that assigned to plasma research and development. The European Communities' NET (Next European Torus) project may offer an opportunity to redress this imbalance. The NET pre-design stage now in progress for some three years has selected many of the best features of plasma and nuclear design from the world's total efforts in these fields, and the NET concept is described in this paper as exemplifying where magnetic fusion power reactor technology stands today. It is concluded that although there are numerous more advanced types of magnetic confinement fusion reactor at early stages of their physics development, the tokamak offers the best opportunity for the early demonstration of fusion power

Diverse orientations in craft education: Student teachers’ conceptions and perceptions

Directory of Open Access Journals (Sweden)

Tarja Kröger

2016-03-01

Full Text Available Craft education in Finland has been in a state of change. The concept of a holistic craft process was implemented in the National Core Curriculum in 2004 and the new Curriculum from 2014 strengthened it. Craft and holistic craft is not one unity but includes several orientations. This study aims to research student teachers’ conceptions and perceptions about diverse orientations and the necessity of craft education before they begin their studies in craft pedagogy. Given that the beliefs that student teachers bring to professional learning play a pivotal role in influencing what they can learn from teacher education, they are a subject worthy of investigation. The data consists of on‐line questionnaire answers by student teachers (N=113 at the University of Finland in teacher education in 2014. The on-line questionnaire was answered at the beginning of a basic course in textile craft education at an early stage of their teacher studies. Findings suggest that student teachers conceive of craft education primarily as model-oriented and skill-oriented rather than design-oriented and expression-oriented. Student teachers think that craft education is needed at school, but explanations are not very diverse. The findings of this study can be useful in the process of developing teacher education programmes.

Coastal Ocean Ecosystem Dynamics Imager Pointing Line-of-Sight Solution Development and Testing

Data.gov (United States)

National Aeronautics and Space Administration — A stable pointing line of sight solution is developed and tested in support of the Coastal Ocean Ecosystem Dynamics Imager for the GEOstationary Coastal and Air...

Relating Complexity and Error Rates of Ontology Concepts. More Complex NCIt Concepts Have More Errors.

Science.gov (United States)

Min, Hua; Zheng, Ling; Perl, Yehoshua; Halper, Michael; De Coronado, Sherri; Ochs, Christopher

2017-05-18

Ontologies are knowledge structures that lend support to many health-information systems. A study is carried out to assess the quality of ontological concepts based on a measure of their complexity. The results show a relation between complexity of concepts and error rates of concepts. A measure of lateral complexity defined as the number of exhibited role types is used to distinguish between more complex and simpler concepts. Using a framework called an area taxonomy, a kind of abstraction network that summarizes the structural organization of an ontology, concepts are divided into two groups along these lines. Various concepts from each group are then subjected to a two-phase QA analysis to uncover and verify errors and inconsistencies in their modeling. A hierarchy of the National Cancer Institute thesaurus (NCIt) is used as our test-bed. A hypothesis pertaining to the expected error rates of the complex and simple concepts is tested. Our study was done on the NCIt's Biological Process hierarchy. Various errors, including missing roles, incorrect role targets, and incorrectly assigned roles, were discovered and verified in the two phases of our QA analysis. The overall findings confirmed our hypothesis by showing a statistically significant difference between the amounts of errors exhibited by more laterally complex concepts vis-à-vis simpler concepts. QA is an essential part of any ontology's maintenance regimen. In this paper, we reported on the results of a QA study targeting two groups of ontology concepts distinguished by their level of complexity, defined in terms of the number of exhibited role types. The study was carried out on a major component of an important ontology, the NCIt. The findings suggest that more complex concepts tend to have a higher error rate than simpler concepts. These findings can be utilized to guide ongoing efforts in ontology QA.

Research on cotton anther development of three male-sterile lines

International Nuclear Information System (INIS)

Dou Liping; Tang Canming; Yue Jieyu; Wang Qingya

2009-01-01

Pollens of Sumian 22 were irradiated by 60 Co γ-rays at a dose of 20Gy, then fertilized to pistil and harvested seed. Three male-sterile lines were selected from M 1 plants, their anther observed by paraffin slice technique. Although there were some different characteristics during the abortion anther development, the abortion was consistent: the abortion stage from the development periods of pollen mother cells to microspore, pollen mother cells, tapetum, middle layer cells and the shape of anther were affected, the results contained micronucleus and double nucleus, cytoplasm expansion during the period of meiosis, tapetum and middle layer cells and so on were abnormal. (authors)

Status of a reformer design for a modular HTGR in an in-line configuration

International Nuclear Information System (INIS)

Gluck, R.; Whitling, W.H.; Lipps, A.J.

1984-01-01

For the past several years the General Electric Company has had the technical lead on advanced concept studies for the Modular High Temperature Gas Cooled Reactor (HTGR) programs sponsored by the United States Department of Energy. The focus of the Modular Reactor System (MRS) effort is the development of a generic nuclear heat source capable of supplying heat to either a steam generator/electric cycle or a high temperature steam /methane reforming cycle. Some early ground rules for this study were that the reactor be designed for 950 deg. C direct cycle reforming and that the core be of the prismatic type. Since the prismatic core required control rods near the center of the core, the vertical in-line concept was selected to promote natural circulation cooling of the core for all potential transients except the depressurized core heatup transient. Although the requirement for a prismatic core has been eliminated for recent cost reduction studies, the vertical in-line configuration has been retained for its potential as the lowest cost configuration. This paper presents the results of recent design and analytical studies conducted to evaluate the feasibility of using a steam/methane reformer in a Vertical In-Line (VIL) arrangement with the generic nuclear heat source

Internal combustion engine report: Spark ignited ICE GenSet optimization and novel concept development

Energy Technology Data Exchange (ETDEWEB)

Keller, J.; Blarigan, P. Van [Sandia National Labs., Livermore, CA (United States)

1998-08-01

In this manuscript the authors report on two projects each of which the goal is to produce cost effective hydrogen utilization technologies. These projects are: (1) the development of an electrical generation system using a conventional four-stroke spark-ignited internal combustion engine generator combination (SI-GenSet) optimized for maximum efficiency and minimum emissions, and (2) the development of a novel internal combustion engine concept. The SI-GenSet will be optimized to run on either hydrogen or hydrogen-blends. The novel concept seeks to develop an engine that optimizes the Otto cycle in a free piston configuration while minimizing all emissions. To this end the authors are developing a rapid combustion homogeneous charge compression ignition (HCCI) engine using a linear alternator for both power take-off and engine control. Targeted applications include stationary electrical power generation, stationary shaft power generation, hybrid vehicles, and nearly any other application now being accomplished with internal combustion engines.

The direct liquefaction proof of concept program

Energy Technology Data Exchange (ETDEWEB)

Comolli, A.G.; Lee, L.K.; Pradhan, V.R.; Stalzer, R.H. [New York & Puritan Avenues, Lawrenceville, NJ (United States)

1995-12-31

The goal of the Proof of Concept (POC) Program is to develop Direct Coal Liquefaction and associated transitional technologies towards commercial readiness for economically producing premium liquid fuels from coal in an environmentally acceptable manner. The program focuses on developing the two-stage liquefaction (TSL) process by utilizing geographically strategic feedstocks, commercially feasible catalysts, new prototype equipment, and testing co-processing or alternate feedstocks and improved process configurations. Other high priority objectives include dispersed catalyst studies, demonstrating low rank coal liquefaction without solids deposition, improving distillate yields on a unit reactor volume basis, demonstrating ebullated bed operations while obtaining scale-up data, demonstrating optimum catalyst consumption using new concepts (e.g. regeneration, cascading), producing premium products through on-line hydrotreating, demonstrating improved hydrogen utilization for low rank coals using novel heteroatom removal methods, defining and demonstrating two-stage product properties for upgrading; demonstrating efficient and economic solid separation methods, examining the merits of integrated coal cleaning, demonstrating co-processing, studying interactions between the preheater and first and second-stage reactors, improving process operability by testing and incorporating advanced equipment and instrumentation, and demonstrating operation with alternate coal feedstocks. During the past two years major PDU Proof of Concept runs were completed. POC-1 with Illinois No. 6 coal and POC-2 with Black Thunder sub-bituminous coal. Results from these operations are continuing under review and the products are being further refined and upgraded. This paper will update the results from these operations and discuss future plans for the POC program.

Consolidated fuel-reprocessing program:: man/machine interface development for the REMOTEX concept

International Nuclear Information System (INIS)

Garin, J.; Clarke, M.M.

1981-01-01

This paper describes ongoing research at ORNL to develop a man/machine interface system that can be used to remotely control a system composed of a transporter base and a force-reflecting, servo-controlled manipulator. A unique feature of the concept is the incorporation of totally remote operation. Thus, a major objective is the requirement that an operator have a sense of presence in the remote environment. Man/machine interface requirements for this totally remote operation remain to be developed. Therefore, a simulator is being built to optimize such requirements and the developments are discussed

The development of the dementia concept in 19th century

Directory of Open Access Journals (Sweden)

Leonardo Caixeta

2014-07-01

Full Text Available The dementia concept has been reformulated through its history and the 19th century was remarkable in the construction of this concept as we understand it today. Like other syndromes, much of the history of the dementia concept comes from the attempt to separate it from other nosological conditions, giving it a unique identity. The fundamental elements for the arising of the dementia modern concept were: a correlation of the observed syndrome with organic-cerebral lesions; b understanding of the irreversibility of the dementia evolution; c its relation with human ageing; and d the choice of the cognitive dysfunction as a clinical marker of the dementia concept.

Design and development of radiation absorber for sighting beam line

International Nuclear Information System (INIS)

Sridhar, R.; Shukla, S.K.

2005-01-01

During the commissioning of Indus-2 , it is necessary to view the synchrotron radiation that will be emanating from the dipole exit ports. The 10 0 beam line from dipole 11 was earmarked for sighting beam line. The synchrotron radiation power density would be around 340 watts on the photon absorber inside the radiation absorber module, at the specified beam power of Indus-2. The beam striking on this photon absorber produces x-rays and Bremsstrahlung radiation. These are to be stopped and absorbed by radiation absorber. The photon absorber and the radiation absorber are integrated in a single vacuum chamber and actuated by a pneumatic cylinder connected using a bellow. Radiation absorber was needed to isolate the diagnostic components and to protect them from radiation a well as heat when they were not in use. The paper describes the design, calculation and development of the dynamic photon cum radiation absorber. The ultimate vacuum performance is also described. (author)

Children's Development of Concepts Related to Country and Nationality: A Canadian Perspective.

Science.gov (United States)

Brown, James A.

1980-01-01

Canadian children follow an apparent sequence in the development of a concept of nationality from a verbal level of understanding of geographical relationships (beginning about age six), to an ability to demonstrate spatial relationships, then to an understanding of one's nationality, at about age 10. There are important educational implications.…

System Leadership for School Improvement: A Developing Concept and Set of Practices

Science.gov (United States)

Dimmock, Clive

2016-01-01

System leadership is a developing concept and practice increasingly seen as a tool for school improvement, as policymakers switch from traditional top-down reform to professional models of schools working collaboratively. System leadership is being championed by the Scottish College for Educational Leadership (SCEL), but is still in its infancy in…

INTELLIGENT NETWORKS, SMART GRIDS CONCEPT, CRUCIAL TECHNOLOGIES FOR SUSTAINABLE DEVELOPMENT

Directory of Open Access Journals (Sweden)

Constantin RADU

2011-05-01

Full Text Available In this article is presented the concept of smart grids, a very important technology for sustainable development. In the context of globalization of the world lives in an increasingly complex security environment, with rapid changes, some obvious, others less obvious implications in the short, medium or long term, international, national, local and up to every citizen. All countries in the globalized world economy is facing energy problems in terms of climate change have intensified in the twentieth century.

On Farmer's line, probability density functions, and overall risk

International Nuclear Information System (INIS)

Munera, H.A.; Yadigaroglu, G.

1986-01-01

Limit lines used to define quantitative probabilistic safety goals can be categorized according to whether they are based on discrete pairs of event sequences and associated probabilities, on probability density functions (pdf's), or on complementary cumulative density functions (CCDFs). In particular, the concept of the well-known Farmer's line and its subsequent reinterpretations is clarified. It is shown that Farmer's lines are pdf's and, therefore, the overall risk (defined as the expected value of the pdf) that they represent can be easily calculated. It is also shown that the area under Farmer's line is proportional to probability, while the areas under CCDFs are generally proportional to expected value

Planning support concept to implementation of sustainable parking development projects in ancient Mediterranean cities

Directory of Open Access Journals (Sweden)

Nikša Jajac

2014-12-01

Full Text Available This paper proposes a planning support concept (PSC to implementation of sustainable parking development projects (SPDP in ancient Mediterranean cities. It is conceptualized by the logic of decision support systems and a multicriteria analysis approach. The purpose of the concept is to support setting of implementation priorities for subprojects (construction of new and/or improvement of existing parking within a SPDP. Analysing the existing and a planned state of parking within the city a goal tree is established. Subprojects are defined accordingly. Objectives from the last hierarchy level within the goal tree are used as criteria for assessment of defined subprojects. Representatives of stakeholders provided criteria weights by application of AHP and SAW methods. PROMETHEE II was used for priority ranking and PROMETHEE V ensured a definition of project’s implementation phases. The result of the presented concept is the implementation plan for such projects. The concept is tested on the city of Trogir.