Photon veto counters at KTeV/KAMI with blue WLS fibers

International Nuclear Information System (INIS)

Hanagaki, Kazunori

1998-01-01

The photon veto detectors used in KTeV experiment were required to have high detection efficiency with high speed response. To satisfy the requirements, we used scintillation counters with blue wave length shifter fibers for their readout. This document describes the design and performance of the photon veto detectors and a possible improvement for future experiments

Thymic epithelial cells. I. Expression of strong suppressive (veto) activity in mouse thymic epithelial cell cultures

DEFF Research Database (Denmark)

Claesson, Mogens Helweg; Ropke, C

1990-01-01

We show that thymic epithelial cells grown under serum-free conditions in a chemically defined culture medium can act as veto cells in vitro. The veto activity of thymic epithelial cells results in inactivation of specific alloreactive cytotoxic T-cell precursors at the clonal level. It is conclu......We show that thymic epithelial cells grown under serum-free conditions in a chemically defined culture medium can act as veto cells in vitro. The veto activity of thymic epithelial cells results in inactivation of specific alloreactive cytotoxic T-cell precursors at the clonal level...

The performance of the Muon Veto of the Gerda experiment

Energy Technology Data Exchange (ETDEWEB)

Freund, K.; Falkenstein, R.; Grabmayr, P.; Hegai, A.; Jochum, J.; Knapp, M.; Ritter, F.; Schmitt, C.; Schuetz, A.K. [Eberhard Karls Universitaet Tuebingen, Physikalisches Institut, Tuebingen (Germany); Lubsandorzhiev, B. [Eberhard Karls Universitaet Tuebingen, Physikalisches Institut, Tuebingen (Germany); Institute for Nuclear Research of the Russian Academy of Sciences, Moscow (Russian Federation); Jitnikov, I.; Shevchik, E.; Shirchenko, M.; Zinatulina, D. [Joint Institute for Nuclear Research, Dubna (Russian Federation)

2016-05-15

Low background experiments need a suppression of cosmogenically induced events. The Gerda experiment located at Lngs is searching for the 0νββ decay of {sup 76}Ge. It is equipped with an active muon veto the main part of which is a water Cherenkov veto with 66 PMTs in the water tank surrounding the Gerda cryostat. With this system 806 live days have been recorded, 491 days were combined muon-germanium data. A muon detection efficiency of ε{sub μd} = (99.935 ± 0.015)% was found in a Monte Carlo simulation for the muons depositing energy in the germanium detectors. By examining coincident muon-germanium events a rejection efficiency of ε{sub μr} = (99.2{sub -0.4}{sup +0.3})% was found. Without veto condition the muons by themselves would cause a background index of BI{sub μ} = (3.16 ± 0.85) x 10{sup -3} cts/(keV . kg . year) at Q{sub ββ}. (orig.)

California Attorney General opines: California's nuclear legislation unconstitutional

International Nuclear Information System (INIS)

Gabin, V.

1979-01-01

The California Attorney General found three sections of the state's nuclear regulation code to be in violation of Federal authority and the State Constitution. Legislation and court cases since 1946 are quoted to support the Attorney General's position. The Warren--Alquist Act, which requires a demonstrated technology for reprocessing fuel rods or disposing of high-level wastes before a nuclear plant can be licensed, is unconstitutional because it usurps Federal control and allows the state to permanently block nuclear facility construction and certification. States' rights in the area of radiological health and safety are supplanted by the Federal government

The Brazilian electric power sector reformulation process: an analysis of the veto players; O processo de reforma do setor eletrico brasileiro: uma analise dos 'veto players'

Energy Technology Data Exchange (ETDEWEB)

Roxo, Leticia

2007-07-01

The electric power sector reformulation implemented in the Brazil makes evident the intrinsic difficulty to handle with complex set of veto players. The multiplicity of veto players characterized by distinct ideologies results in the multiplication of business rounds related to the elaboration and implementation of the new game rules, whose agreement involves conflicts on the presented proposal, resulting in the slowness pf reformulation process conclusion.

Basic Stand Alone Medicare DME Line Items PUF

Data.gov (United States)

U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Durable Medical Equipment (DME) Line Items Public Use Files (PUF) with information from Medicare DME claims. The...

The calibration system of the GERDA muon veto Cherenkov detector

International Nuclear Information System (INIS)

Ritter, Florian; Lubsandorzhiev, Bayarto; Freund, Kai; Grabmayr, Peter; Jochum, Josef; Knapp, Markus; Meierhofer, Georg; Shaibonov, Bator

2010-01-01

The GERDA experiment searches for neutrinoless double beta decay (0νββ). To achieve a sensitivity of 10 -3 counts/(keVkgy) or better within a specific region of interest (ROI), a good background identification is needed. Therefore GERDA is located in the LNGS (Laboratori Nationali del Gran Sasso) underground facility. In addition to the good rejection of cosmic muons due to the surrounding bedrocks, a dual muon veto system has to be used. For calibration and monitoring of the muon veto, two separate systems have been developed.

The performance of the Muon Veto of the G erda experiment

Science.gov (United States)

Freund, K.; Falkenstein, R.; Grabmayr, P.; Hegai, A.; Jochum, J.; Knapp, M.; Lubsandorzhiev, B.; Ritter, F.; Schmitt, C.; Schütz, A.-K.; Jitnikov, I.; Shevchik, E.; Shirchenko, M.; Zinatulina, D.

2016-05-01

Low background experiments need a suppression of cosmogenically induced events. The Gerda experiment located at Lngs is searching for the 0ν β β decay of ^{76}Ge. It is equipped with an active muon veto the main part of which is a water Cherenkov veto with 66 PMTs in the water tank surrounding the Gerda cryostat. With this system 806 live days have been recorded, 491 days were combined muon-germanium data. A muon detection efficiency of \\varepsilon _\\upmu d=(99.935± 0.015) % was found in a Monte Carlo simulation for the muons depositing energy in the germanium detectors. By examining coincident muon-germanium events a rejection efficiency of \\varepsilon _{\\upmu r}=(99.2_{-0.4}^{+0.3}) % was found. Without veto condition the muons by themselves would cause a background index of {BI}_{μ }=(3.16 ± 0.85)× 10^{-3} cts/(keV\\cdot kg\\cdot year) at Q_{β β }.

Flux modulations seen by the muon veto of the GERDA experiment

Science.gov (United States)

GERDA Collaboration; Agostini, M.; Allardt, M.; Bakalyarov, A. M.; Balata, M.; Barabanov, I.; Barros, N.; Baudis, L.; Bauer, C.; Becerici-Schmidt, N.; Bellotti, E.; Belogurov, S.; Belyaev, S. T.; Benato, G.; Bettini, A.; Bezrukov, L.; Bode, T.; Borowicz, D.; Brudanin, V.; Brugnera, R.; Caldwell, A.; Cattadori, C.; Chernogorov, A.; D'Andrea, V.; Demidova, E. V.; di Vacri, A.; Domula, A.; Doroshkevich, E.; Egorov, V.; Falkenstein, R.; Fedorova, O.; Freund, K.; Frodyma, N.; Gangapshev, A.; Garfagnini, A.; Grabmayr, P.; Gurentsov, V.; Gusev, K.; Hegai, A.; Heisel, M.; Hemmer, S.; Hofmann, W.; Hult, M.; Inzhechik, L. V.; Ioannucci, L.; Janicsk'o Cs'athy, J.; Jochum, J.; Junker, M.; Kazalov, V.; Kihm, T.; Kirpichnikov, I. V.; Kirsch, A.; Klimenko, A.; Knapp, M.; Knöpfle, K. T.; Kochetov, O.; Kornoukhov, V. N.; Kuzminov, V. V.; Laubenstein, M.; Lazzaro, A.; Lebedev, V. I.; Lehnert, B.; Liao, H. Y.; Lindner, M.; Lippi, I.; Lubashevskiy, A.; Lubsandorzhiev, B.; Lutter, G.; Macolino, C.; Majorovits, B.; Maneschg, W.; Medinaceli, E.; Misiaszek, M.; Moseev, P.; Nemchenok, I.; Palioselitis, D.; Panas, K.; Pandola, L.; Pelczar, K.; Pullia, A.; Riboldi, S.; Ritter, F.; Rumyantseva, N.; Sada, C.; Salathe, M.; Schmitt, C.; Schneider, B.; Schönert, S.; Schreiner, J.; Schütz, A.-K.; Schulz, O.; Schwingenheuer, B.; Selivanenko, O.; Shevchik, E.; Shirchenko, M.; Simgen, H.; Smolnikov, A.; Stanco, L.; Stepaniuk, M.; Strecker, H.; Vanhoefer, L.; Vasenko, A. A.; Veresnikova, A.; von Sturm, K.; Wagner, V.; Walter, M.; Wegmann, A.; Wester, T.; Wiesinger, C.; Wilsenach, H.; Wojcik, M.; Yanovich, E.; Zhitnikov, I.; Zhukov, S. V.; Zinatulina, D.; Zuber, K.; Zuzel, G.

2016-11-01

The GERDA experiment at LNGS of INFN is equipped with an active muon veto. The main part of the system is a water Cherenkov veto with 66 PMTs in the water tank surrounding the GERDA cryostat. The muon flux recorded by this veto shows a seasonal modulation. Two causes have been identified: (i) secondary muons from the CNGS neutrino beam (2.2%) and (ii) a temperature modulation of the atmosphere (1.4%). A mean cosmic muon rate of Iμ0 =(3.477 ± 0 .002stat ± 0 .067sys) ×10-4 /(s · m2) was found in good agreement with other experiments at LNGS. Combining the present result with those from previous experiments at LNGS the effective temperature coefficient αT , Lngs is determined to 0.93 ± 0.03. A fit of the temperature coefficients measured at various underground sites yields a kaon to pion ratio rK/π of 0.10 ± 0.03.

The charged particle veto system of the cosmic ray electron synchrotron telescope

Science.gov (United States)

Geske, Matthew T.

The Cosmic Ray Electron Synchrotron Telescope is a balloon-borne detector designed to measure cosmic electrons at energies from 2 to 50 TeV. CREST completed a successful 10-day Antarctic flight which launched on December 25, 2011. CREST utilizes a novel detection method, searching for the synchrotron radiation emitted by the interaction of TeV-energy electrons with the geomagnetic field. The main detector component for CREST is a 32 x 32 square array of BaF 2 crystal detectors coupled to photomultiplier tubes, with an inter-crystal spacing of 7.5 cm. This document describes the design, construction and flight of the CREST experiment. A special focus is put upon the charged particle veto system, and its use in the analysis of the CREST results. The veto system, consisting of a series of 27 large slabs of organic plastic scintillator read out through photomultiplier tubes, is designed as a passive mechanism for rejecting charged particle events that could contaminate the X-ray signal from synchrotron radiation. The CREST veto system has 99.15% geometric coverage, with individual detector components exhibiting a mean detection efficiency of 99.7%. In whole, the veto system provides a charged particle rejection factor of better than 7 x 103.

Sealed drift tube cosmic ray veto counters

International Nuclear Information System (INIS)

Rios, R.; Tatar, E.; Bacon, J.D.; Bowles, T.J.; Hill, R.; Green, J.A.; Hogan, G.E.; Ito, T.M.; Makela, M.; Morris, C.L.; Mortenson, R.; Pasukanics, F.E.; Ramsey, J.; Saunders, A.; Seestrom, S.J.; Sondheim, W.E.; Teasdale, W.; Saltus, M.; Back, H.O.; Cottrell, C.R.

2011-01-01

We describe a simple drift tube counter that has been used as a cosmic ray veto for the UCNA experiment, a first-ever measurement of the neutron beta-asymmetry using ultra-cold neutrons. These detectors provide an inexpensive alternative to more conventional scintillation detectors for large area cosmic ray anticoincidence detectors.

76 FR 58138 - Defense Federal Acquisition Regulation Supplement (DFARS); Alternative Line Item Structure (DFARS...

Science.gov (United States)

2011-09-20

... DoD published a proposed rule in the Federal Register at 76 FR 21847 on April 19, 2011, to add DFARS..., the contract line item may be for a desktop computer, but the actual items delivered, invoiced, and..., Desktop with 20 EA CPU, Monitor, Keyboard and Mouse. Alternative line-item structure offer where monitors...

A Corporate Veto on Health Policy? Global Constitutionalism and Investor-State Dispute Settlement.

Science.gov (United States)

Hawkins, Benjamin; Holden, Chris

2016-10-01

The importance of trade and investment agreements for health is now widely acknowledged in the literature, with much attention now focused on the impact of investor-state dispute settlement (ISDS) mechanisms. However, much of the analysis of such agreements in the health field remains largely descriptive. We theorize the implications of ISDS mechanisms for health policy by integrating the concept of global constitutionalism with veto point theory. It is argued that attempts to constitutionalize investment law, through a proliferation of International Investment Agreements (IIAs), has created a series of new veto points at which corporations may seek to block new policies aimed at protecting or enhancing public health. The multiplicity of new veto points in this global "spaghetti bowl" of IIAs creates opportunities for corporations to venue shop; that is, to exploit the agreements, and associated veto points, through which they are most likely to succeed in blocking or deterring new regulation. These concepts are illustrated with reference to two case studies of investor-state disputes involving a transnational tobacco company, but the implications of the analysis are of equal relevance for a range of other industries and health issues. Copyright © 2016 by Duke University Press.

Electronics for the LAMPF neutrino experiment's veto counter system

International Nuclear Information System (INIS)

Dalton, C.

1981-09-01

A cosmic-ray veto detector has been constructed in the neutrino cave at Los Alamos National Laboratory. This report describes the electronic readout system designed to buffer and compact the data from the detector

OPINIONS ON THE UNCONSTITUTIONALITY ASPECTS RELATED TO THE CYBERSECURITY LAW

Directory of Open Access Journals (Sweden)

Maxim DOBRINOIU

2015-07-01

Full Text Available Nowadays, on a rise of Cybersecurity incidents, with even more ferocious and sophisticated methods and tools of performing online attacks, the governments should struggle to create effective counter-measures, both in terms of technical endeavours and strong legal provisions. Following a successful Cybersecurity Strategy, the Romanian government’s Cybersecurity Law proposal was expected to bring the much needed safety measures in the national component of the cyberspace, but was dropped for unconstitutional reasons, reopening the debate on national security versus the protection of citizens’ constitutional rights to privacy.

Veto analysis for gravitational wave burst signals in TAMA300 data using an ALF filter

International Nuclear Information System (INIS)

Akutsu, T; Ando, M; Kanda, N; Tatsumi, D; Telada, S; Miyoki, S; Ohashi, M

2006-01-01

Data taken by interferometers for gravitational waves include noises caused by instabilities of the interferometers. Veto analyses to remove false events caused by detectors are then necessary to detect real gravitational waves or to obtain a lower upper limit. In this paper, a veto analysis with an environmental monitor channel was implemented. We calculate the trigger rate of TAMA300 data and demonstrate the veto analysis using an alternative linear fit (ALF) filter. A threshold for the environmental monitor channel signals is set to be at 1% of the false dismissal rate. The result shows a 1/10-1/1000 reduction of trigger event rates

A comprehensive framework for studying W{sup ′} and Z{sup ′} bosons at hadron colliders with automated jet veto resummation

Energy Technology Data Exchange (ETDEWEB)

Fuks, Benjamin [Sorbonne Universités, UPMC University Paris 06, UMR 7589, LPTHE, F-75005, Paris (France); CNRS, UMR 7589, LPTHE, F-75005, Paris (France); Institut Universitaire de France, 103 boulevard Saint-Michel, 75005 Paris (France); Ruiz, Richard [Institute for Particle Physics Phenomenology (IPPP),Department of Physics, Durham University,Durham, DH1 3LE (United Kingdom)

2017-05-08

The production of high-mass, color-singlet particles in hadron collisions is universally accompanied by initial state QCD radiation that is predominantly soft with respect to the hard process scale Q and/or collinear with respect to the beam axis. At TeV-scale colliders, this is in contrast to top quark and multijet processes, which are hard and central. Consequently, vetoing events with jets possessing transverse momenta above p{sub T}{sup Veto} in searches for new color-singlet states can efficiently reduce non-singlet backgrounds, thereby increasing experimental sensitivity. To quantify this generic observation, we investigate the production and leptonic decay of a Sequential Standard Model W{sup ′} boson at the 13 TeV Large Hadron Collider. We systematically consider signal and background processes at next-to-leading-order (NLO) in QCD with parton shower (PS) matching. For color-singlet signal and background channels, we resum Sudakov logarithms of the form α{sub s}{sup j}(p{sub T}{sup Veto})log{sup k} (Q/p{sub T}{sup Veto}) up to next-to-next-to-leading logarithmic accuracy (NNLL) with NLO matching. We obtain our results using the MADGRAPH5{sub A}MC@NLO and MADGRAPH5{sub A}MC@NLO-SCET frameworks, respectively. Associated Universal FEYNRULES Output model files capable of handling NLO+PS- and NLO+NNLL-accurate computations are publicly available. We find that within their given uncertainties, both the NLO+PS and NLO+NNLL(veto) calculations give accurate and consistent predictions. Consequently, jet vetoes applied to color-singlet processes can be reliably modeled at the NLO+PS level. With respect to a b-jet veto of p{sub T}{sup Veto}=30 GeV, flavor-agnostic jet vetoes of p{sub T}{sup Veto}=30−40 GeV can further reduce single top and tt̄ rates by a factor of 2-50 at a mild cost of the signal rate. Jet vetoes can increase the signal-to-noise ratios by roughly 10% for light W{sup ′} boson masses of 30−50 GeV and 25%-250% for masses of 300-800 GeV.

78 FR 41800 - Announcement of Requirements and Registration for “I VetoViolence Because . . .”: Teen Dating...

Science.gov (United States)

2013-07-11

... Center), asks violence prevention professionals, allied organizations, students, VetoViolence Facebook... communities. The PSA finalists and winners will be showcased in three categories on the VetoViolence Facebook... place of business in the United States, and in the case of an individual, whether participating singly...

O estável poder de veto Forças Armadas sobre o tema da anistia política no Brasil The stable military power as veto players in issues related to the political amnesty in Brazil

Directory of Open Access Journals (Sweden)

Maria Celina D'Araujo

2012-12-01

Full Text Available O trabalho propõe-se a demonstrar porque desde 1979 foi possível aos militares brasileiros atuarem como veto players sempre que entrou em debate a revisão da Lei de Anistia. Nossa hipótese é que esse poder de veto explica-se pela existência de uma grande autonomia militar antes, durante e depois da ditadura, associada aos baixos níveis de respeito aos direitos humanos na sociedade brasileira e ao baixo interesse do Congresso e do governo em geral pelo tema das Forças Armadas.The study aims to show why since 1979 the Brazilian military had been able to act as veto players whenever the debate about Amnesty Law was argued. Our hypothesis is that this veto power is explained by the existence of a large military autonomy before, during and after the dictatorship, associated with low levels of human rights culture in Brazilian society and the low interest of Congress and government in general about Armed Forces issues.

The muon veto of the Dortmund low-background facility

Energy Technology Data Exchange (ETDEWEB)

Gerhardt, Marcel; Goessling, Claus; Kroeninger, Kevin; Nitsch, Christian [TU Dortmund, Physik EIV, D-44221 Dortmund (Germany)

2016-07-01

The Dortmund Low Background Facility (DLB) is a low-background gamma-ray spectrometry system with an artificial overburden built at ground level. It uses a high-purity germanium detector with a relative efficiency of 60 %, which is set up inside a massive shielding. The outer shielding consists of barite concrete and cast iron, corresponding to ten meters of water equivalent (mw.e.), and houses a multi-layer lead castle as an inner shielding, that features borated polyethylene as a neutron absorber. Additionally an active muon veto is installed to reduce cosmic-induced contributions to the spectrum. The remarkably lowered background of the DLB compared to an unshielded spectrometer, allows radio-purity screening measurements for material preselection with sensitivities better than 1 Bq/kg. This talk focusses on the muon veto of the DLB. Its basic concept and its benefits for low-background operation are described. Also its current status of development and future upgrade plans are presented.

Performance of the LAr scintillation veto of GERDA Phase II

Energy Technology Data Exchange (ETDEWEB)

Wiesinger, Christoph [Technische Universitaet Muenchen, Physik Dept. E15, James-Franck-Strasse, 85748 Garching (Germany); Collaboration: GERDA-Collaboration

2015-07-01

Gerda is an experiment to search for the neutrinoless double beta decay in {sup 76}Ge. Results of Phase I have been published in summer 2013 and Gerda is upgraded to Phase II. To reach the aspired background index of ≤ 10{sup -3} cts/(keV.kg.yr) for Phase II active background-suppression techniques are applied, including an active liquid argon (LAr) veto. It has been demonstrated with the LArGe test facility that the detection of argon scintillation light can be used to effectively suppress background events in the germanium, which simultaneously deposit energy in the LAr. The light instrumentation consisting of photomultiplier tubes (PMT) and wavelength-shifting fibers connected to silicon multipliers (SiPM) has been installed in Gerda. In this talk the low background design of the LAr veto and its performance during the commissioning runs are reported.

Bugetul funcțional (Line - Item Budget) și metoda Buget Bază Zero ( Zero Base Budgeting - ZBB)

OpenAIRE

Dan Tudor LAZĂR; Adrian Mihai INCEU

2004-01-01

A line-item budget lists, in vertical columns, each of the revenue sources and each of the types – or classes – of items will purchase during the fiscal year. The line-item budget, which is the most widely used of all budgeting systems, offers many advantages. It is comparatively easy to prepare and doesn’t require sophisticated financial skills. Also, the line-item budget is straightforward, simple to administer and readily understood by everybody. Moreover, the simplicity of the system make...

Veto cell suppression mechanisms in the prevention of allograft rejection

DEFF Research Database (Denmark)

Jacobsen, I M; Claesson, Mogens Helweg

1998-01-01

Substantial evidence has accumulated to suggest that in the near future implementation of the veto-cell-suppressor concept in the treatment of kidney allograft recipients might lead to the establishment of life-long specific allograft tolerance in the absence of further immunosuppressive therapy....

Performance of the LAr scintillation veto of Gerda Phase II

Energy Technology Data Exchange (ETDEWEB)

Wiesinger, Christoph [Physik-Department and Excellence Cluster Universe, Technische Universitaet Muenchen, James-Franck-Strasse, 85748 Garching (Germany); Collaboration: GERDA-Collaboration

2016-07-01

Gerda is an experiment to search for the neutrinoless double beta decay in {sup 76}Ge. Results of Phase I have been published in summer 2013 and Gerda has been upgraded to Phase II. To reach the aspired background index of ∝10{sup -3} cts/(keV.kg.yr) for Phase II active background-suppression techniques are applied, including an active liquid argon (LAr) veto. It has been demonstrated with the LArGe test facility that the detection of argon scintillation light can be used to effectively suppress background events in the germanium detectors, which simultaneously deposit energy in the LAr. The light instrumentation consisting of photomultiplier tubes (PMT) and wavelength-shifting fibers connected to silicon photomultipliers (SiPM) has been installed in Gerda. In this talk the low background design of the LAr veto and its performance during Phase II start-up is reported.

Veto players and equilibrium uniqueness in the Baron–Ferejohn model

Czech Academy of Sciences Publication Activity Database

Celik, Levent; Karabay, Bilgehan

2016-01-01

Roč. 81, č. 1 (2016), s. 33-52 ISSN 0040-5833 R&D Projects: GA ČR(CZ) GAP402/12/0666 Institutional support: PRVOUK-P23 Keywords : multilateral bargaining * equilibrium uniqueness * veto players Subject RIV: AH - Economics Impact factor: 0.606, year: 2016

A liquid argon scintillation veto for the GERDA experiment

Energy Technology Data Exchange (ETDEWEB)

Wegmann, Anne [Max-Planck-Institut fuer Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Collaboration: GERDA-Collaboration

2014-07-01

Gerda is an experiment to search for the neutrinoless double beta decay of {sup 76}Ge. Results of Phase I have been published in summer 2013. Currently Gerda is being upgraded to a second phase. To reach the aspired background index of ≤ 10{sup -3} cts/(keV . kg . yr) for Phase II active background-suppression techniques will be applied, including an active liquid argon veto (LAr veto). It has been demonstrated by the LArGe test facility that the detection of argon scintillation light can be used to effectively suppress background events in the germanium, which simultaneously deposit energy in LAr. This talk focusses on the light instrumentation which is being installed in GERDA. Photomultiplier tubes (PMT) and wavelength-shifting fibers connected to silicon photomultipliers (SiPM) are combined to maximize the photoelectron-yield with respect to various background sources. Monte Carlo simulations have been performed to optimize the design for background suppression and low self-induced background. First results of the prototypes and the progress of installation are reported.

The Large Angle Photon Veto System for the NA62 Experiment at CERN

CERN Document Server

Ambrosino, F; Antonelli, A; Constantini, F; D’Agostini, G; Di Filippo, D; Fantechi, R; Gallorini, S; Giudici, S; Leonardi, E; Mannelli, I; Massarotti, P; Moulson, M; Napolitano, M; Palladino, V; Raffaelli, F; Raggi, M; Saracino, G; Serra, M; Spadaro, T; Valente, P; Venditti, S

2012-01-01

The NA62 experiment at CERN SPS aims at measuring-100 events of the very rare decay K+ →π +ννˉ (BR∼8.5xlO∼10). It poses stringent requirements on PID capabilities to reject the overwhelming π+π0 (63%) and Kμ2(21%) backgrounds. The photon veto system must provide a rejection factor of 10∼8 on π0 decays. As a main γ veto detector, the NA48 liquid Kripton calorimeter will be used. To have full geometrical acceptance up to 50 mr, a set of 12 veto stations should be placed along the vacuum decay tank, with an inefficiency <10∼4 in a wide energy range (200 MeV-35 GeV). Good energy resolution (∼10% at 1 GeV) for threshold definition, good time resolution (∼1 ns) to be used at the trigger level, sensitivity to MIP for calibration with muons of the beam halo are needed. A moderate segmentation in the azimuthal angle is desirable, for reducing the counting rate and providing information on the γ direction. We performed an intense R&D program on three solutions: “spaghetti” calorimeter...

IceVeto: Extended PeV neutrino astronomy in the Southern Hemisphere with IceCube

Energy Technology Data Exchange (ETDEWEB)

Auffenberg, Jan [Physikalisches Institut IIIB RWTH Aachen D-52056, Aachen (Germany); Collaboration: IceCube Collaboration

2014-11-18

IceCube, the world's largest high-energy neutrino observatory, built at the South Pole, recently reported evidence of an astrophysical neutrino flux extending to PeV energies in the Southern Hemisphere. This observation raises the question of how the sensitivity in this energy range could be further increased. In the down-going sector, in IceCube's case the Southern Hemisphere, backgrounds from atmospheric muons and neutrinos pose a challenge to the identification of an astrophysical neutrino flux. The IceCube analysis, that led to the evidence for astrophysical neutrinos, is based on an in-ice veto strategy for background rejection. One possibility available to IceCube is the concept of an extended surface detector, IceVeto, which could allow the rejection of a large fraction of atmospheric backgrounds, primarily for muons from cosmic ray (CR) air showers as well as from neutrinos in the same air showers. Building on the experience of IceTop/IceCube, possibly the most cost-effective and sensitive way to build IceVeto is as an extension of the IceTop detector, with simple photomultiplier based detector modules for CR air shower detection. Initial simulations and estimates indicate that such a veto detector will significantly increase the sensitivity to an astrophysical flux of ν{sub μ} induced muon tracks in the Southern Hemisphere compared to current analyses. Here we present the motivation and capabilities based on initial simulations. Conceptual ideas for a simplified surface array will be discussed briefly.

The unconstitutionality of the environmental compensation: an analyse of the ADIn (Direct Action of Unconstitutionality) 3378; A inconstitucionalidade da compensacao ambiental: uma analise da ADIn (Acao Direta de Inconstitucionalidade) 3378

Energy Technology Data Exchange (ETDEWEB)

Reis, Marcio Monteiro; Masseli, Sandro [Siqueira Castro Advogados, Sao Paulo, SP (Brazil). Setor Regulatorio e Ambiental

2008-07-01

The following paper aims to analyze the judgment of a specific Direct Action of Unconstitutionality ('ADI') filed by the Brazilian National Industry Confederation regarding the constitutionality of environmental compensation fee as disposed by Law 9.985. Such ADI was also sponsored by the Brazilian Oil, Gas and Biofuels Institute ('IBP') as 'amicus curiae'. In light of this, an environmental compensation timeline will be presented in order to support its charging evolution. By doing this we will be in a position to balance economic development and environment. (author)

Simulation of an extended surface detector IceVeto for IceCube-Gen2

Energy Technology Data Exchange (ETDEWEB)

Hansmann, Tim; Auffenberg, Jan; Haack, Christian; Hansmann, Bengt; Kemp, Julian; Konietz, Richard; Leuner, Jakob; Raedel, Leif; Stahlberg, Martin; Schoenen, Sebastian; Wiebusch, Christopher [III. Physikalisches Institut B, RWTH Aachen University (Germany); Collaboration: IceCube-Collaboration

2016-07-01

IceCube is a neutrino observatory located at the geographic South Pole. The main backgrounds for IceCube's primary goal, the measurement of astrophysical neutrinos, are muons and neutrinos from cosmic-ray air showers in the Earth's atmosphere. Strong supression of these backgrounds from the Southern hemisphere has been demonstrated by coincident detection of these air showers with the IceTop surface detector. For an extended instrument, IceCube-Gen2, it is considered to build an enlarged surface array, IceVeto, that will improve the detection capabilities of coincident air showers. We will present simulation studies to estimate the IceVeto capabilities to optimize the IceCube-Gen2 design.

48 CFR 245.7101-3 - DD Form 1348-1, DoD Single Line Item Release/Receipt Document.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false DD Form 1348-1, DoD Single Line Item Release/Receipt Document. 245.7101-3 Section 245.7101-3 Federal Acquisition Regulations... PROPERTY Plant Clearance Forms 245.7101-3 DD Form 1348-1, DoD Single Line Item Release/Receipt Document...

On-line item control at a high enriched nuclear fuel fabrication facility

International Nuclear Information System (INIS)

Lewis, T.W.; Lewis, H.M.

1984-01-01

The on-line item control system at Nuclear Fuel Services, Inc., is a near-real time method capable of tracking uniquely identified items from creation through disposition. The system provides for improved control, timeliness, accuracy and usability of company information and the necessary data required to support the regulatory program for the protection against diversion of Special Nuclear Materials. The system consists of software applications (approximately 150 programs) with man/machine interface controls which provide facilities for correct data entry and for the protection of data integrity. This system went into stand-alone operation in September, 1983 after a twenty month parallel test run with the previous keybatched (manual forms) item control system

Correlated seed failure as an environmental veto to synchronize reproduction of masting plants.

Science.gov (United States)

Bogdziewicz, Michał; Steele, Michael A; Marino, Shealyn; Crone, Elizabeth E

2018-07-01

Variable, synchronized seed production, called masting, is a widespread reproductive strategy in plants. Resource dynamics, pollination success, and, as described here, environmental veto are possible proximate mechanisms driving masting. We explored the environmental veto hypothesis, which assumes that reproductive synchrony is driven by external factors preventing reproduction in some years, by extending the resource budget model of masting with correlated reproductive failure. We ran this model across its parameter space to explore how key parameters interact to drive seeding dynamics. Next, we parameterized the model based on 16 yr of seed production data for populations of red (Quercus rubra) and white (Quercus alba) oaks. We used these empirical models to simulate seeding dynamics, and compared simulated time series with patterns observed in the field. Simulations showed that resource dynamics and reproduction failure can produce masting even in the absence of pollen coupling. In concordance with this, in both oaks, among-year variation in resource gain and correlated reproductive failure were necessary and sufficient to reproduce masting, whereas pollen coupling, although present, was not necessary. Reproductive failure caused by environmental veto may drive large-scale synchronization without density-dependent pollen limitation. Reproduction-inhibiting weather events are prevalent in ecosystems, making described mechanisms likely to operate in many systems. © 2018 The Authors New Phytologist © 2018 New Phytologist Trust.

Unconstitutionality of Section 170 (e) of the price Anderson Act

International Nuclear Information System (INIS)

1977-01-01

Several environmental protection groups in the State of North Carolina have recently contested the conformity with the United States Constitution of Section 170 (e) of the Atomic Energy Act (Price-Anderson Act). The court seized of the question (the United States District Court for the western district of North Carolina, Charlotte Division) held in March 1977 that this Section and the other provisions of the Atomic Energy Act concerning implementation of the $560 million limitation of liability for nuclear damage were unconstitutional and unenforceable insofar as they applied to nuclear incidents occurring inside the United States. The defendants, the former United States Atomic Energy Commission and its then Commissioners as well as the Duke Power Company (the local electricity company) will appeal this decision. The note on case law analyses the arguments retained by the court. (NEA) [fr

Public lending to private hedge funds is inefficient, unstable, unconstitutional and unanimously disagreeable

Directory of Open Access Journals (Sweden)

Sankarshan Acharya

2016-06-01

Full Text Available Public funds include federally insured deposits held under the custody of private banks, central bank loans and taxpayer funds. The principal finding of this paper is that lending such public funds through a private banking system to private hedge funds allied with the banks is inefficient, unstable, fundamentally unfair (unconstitutional and unanimously disagreeable. This finding is akin to the unanimously agreeable safe central banking policy (Acharya, 1991-2016 which, in dynamic general equilibrium, (a eliminates federal guarantee of bank deposits, (b offers every business enterprise and household an option to keep in the central bank any part of its deposits it wants to be held absolutely safely, (c completely deregulates all private banks without any privilege to rob public or private wealth like too-big-to-fail or too-big-to-be-jailed status or the power of market making and clearing. Safe central banking is the only way to make private banks responsible to hold sufficient capital to attract uninsured private deposits like the trading houses currently do. The private banks will then have complete freedom to lend their uninsured deposits to private hedge funds. The Volker Rule (NYT, January 30, 2010, incorporated in the Dodd-Frank Act of 2010, is an infeasible and unworkable band-aid for the moral-hazard driven systemic robbery of wealth creators wrought by the government-ordained private banking custody of public funds. The established systemic moral-hazard problem can be efficiently and constitutionally resolved only through unanimously agreeable safe central banking. Current proposals on overhauling of Fannie and Freddie made by various pundits of systemic robbery amount to a gargantuan amount of public lending to private hedge funds and, hence, inefficient, unstable, unconstitutional and unanimously disagreeable.

Characterization of an IceTop tank for the IceCube surface extension IceVeto

Energy Technology Data Exchange (ETDEWEB)

Kemp, Julian; Auffenberg, Jan; Hansmann, Bengt; Rongen, Martin; Stahlberg, Martin; Wiebusch, Christopher [III. Physikalisches Institut B, RWTH Aachen University (Germany); Collaboration: IceCube-Collaboration

2015-07-01

IceTop is an air-shower detector located at the South Pole on the surface above the IceCube detector. It consists of 81 detector stations with two Cherenkov tanks each. The tanks are filled with clear ice and instrumented with two photomultipliers. IceTop detects cosmic-ray induced air-showers above an energy threshold of ∝300 TeV. Muons and neutrinos from these air-showers are the main background for astrophysical neutrino searches with IceCube. The usage of IceTop to veto air-showers largely reduces this background in the field of view. To enlarge the field of view an extension of the surface detector, IceVeto, is planned. Therefore, we investigate the properties of an original IceTop tank as a laboratory reference for the development of new detection module designs. First results of these measurements are presented.

Advance commitment: an alternative approach to the family veto problem in organ procurement.

Science.gov (United States)

De Wispelaere, Jurgen; Stirton, Lindsay

2010-03-01

This article tackles the current deficit in the supply of cadaveric organs by addressing the family veto in organ donation. The authors believe that the family veto matters-ethically as well as practically-and that policies that completely disregard the views of the family in this decision are likely to be counterproductive. Instead, this paper proposes to engage directly with the most important reasons why families often object to the removal of the organs of a loved one who has signed up to the donor registry-notably a failure to understand fully and deliberate on the information and a reluctance to deal with this sort of decision at an emotionally distressing time. To accommodate these concerns it is proposed to separate radically the process of information, deliberation and agreement about the harvesting of a potential donor's organs from the event of death and bereavement through a scheme of advance commitment. This paper briefly sets out the proposal and discusses in some detail its design as well as what is believed to be the main advantages compared with the leading alternatives.

Discrimination of Charged Particles in a Neutral Beam Line by Using a Solid Scintillation Detector

Energy Technology Data Exchange (ETDEWEB)

Woo, Jong-Kwan; Ko, Jewou; Liu, Dong [Jeju National University, Jeju (Korea, Republic of)

2017-01-15

In the past several decades, many studies have been conducted to search for non-baryonic dark matter, such as weakly interactive massive particles (WIMPs). In the search for WIMPs, charged particles incident on the detector are background particles because WIMPs are neutral. Charged particles originate from various sources, such as cosmic rays and laboratory materials surrounding the main detector. Therefore, a veto that discriminates charged particles can improve the particle detection efficiency of the entire experiment for detecting WIMPs. Here, we investigate in the thickness range of 1 mm to 5 mm, the optimal thickness of a polystyrene scintillator as a charged particle veto detector. We found that 3-mm-thick polystyrene provides the best performance to veto charged particles and the charged-particle background in the search for the WIMP signal. Furthermore, we fabricated 3-mm-thick and 5-mm-thick polystyrene charged particle veto detectors that will be used in an underground laboratory in the search for WIMP dark matter. After exposing those detectors are the actual beam line, we compared the rate of charged particles measured using those detectors and the rate simulated through a Monte Carlo simulation.

Development of a cosmic veto gamma-spectrometer

International Nuclear Information System (INIS)

Burnett, J.L.; Davies, A.V.

2012-01-01

Cosmic radiation contributes significantly towards the background radiation measured by a gamma-spectrometer. A novel cosmic veto gamma-spectrometer has been developed that provides a mean background reduction of 54.5%. The system consists of plastic scintillation plates operated in time-stamp mode to detect coincident muon interactions within an HPGe gamma-spectrometer. The instrument is easily configurable and provides improved sensitivity for radionuclides indicative of nuclear weapons tests and reactor incidents, including 140 Ba, 95 Zr, 99 Mo, 141 Ce, 147 Nd, 131 I, 134 Cs and 137 Cs. This has been demonstrated for Comprehensive Nuclear-Test-Ban Treaty applications to obtain the required 140 Ba MDA of 24 mBq within 2 days counting. Analysis of an air filter sample collected during the Fukushima incident indicates improved sensitivity compared to conventional gamma-spectrometers. (author)

Finite top-mass effects in gluon-induced Higgs production with a jet-veto at NNLO

Energy Technology Data Exchange (ETDEWEB)

Neumann, Tobias [Universitaet Wuppertal (Germany); Wiesemann, Marius [Universitaet Zuerich (Switzerland)

2015-07-01

Effects from a finite top quark mass on the H+n-jet cross section through gluon fusion are studied for n = 0/n ≥ 1 at NNLO/NLO QCD. For this purpose, sub-leading terms in 1/m{sub t} are calculated. We show that the asymptotic expansion of the jet-vetoed cross section at NNLO is very well behaved and that the heavy-top approximation is valid at the five permille level up to jet-veto cuts of 300 GeV. For the inclusive Higgs+jet rate, we introduce a matching procedure that allows for a reliable prediction of the top-mass effects using the expansion in 1/m{sub t}. The quality of the effective field theory to evaluate differential K-factors for the distribution of the hardest jet is found to be better than 1-2% as long as the transverse momentum of the jet is integrated out or remains below about 150 GeV.

76 FR 21847 - Defense Federal Acquisition Regulation Supplement (DFARS), Alternative Line-Item Structure (DFARS...

Science.gov (United States)

2011-04-19

... with CPU, 20 EA Monitor, Keyboard and Mouse. Alternative line-item structure offer where monitors are... CPU, 20 EA Keyboard and Mouse. 0002 Monitor 20 EA (End of provision)] [FR Doc. 2011-8966 Filed 4-18-11... problems in the receipt and acceptance phase for contract deliverables and payments. This group determined...

Coherent network detection of gravitational waves: the redundancy veto

International Nuclear Information System (INIS)

Wen Linqing; Schutz, Bernard F

2005-01-01

A network of gravitational wave detectors is called redundant if, given the direction to a source, the strain induced by a gravitational wave in one or more of the detectors can be fully expressed in terms of the strain induced in others in the network. Because gravitational waves have only two polarizations, any network of three or more differently oriented interferometers with similar observing bands is redundant. The three-armed LISA space interferometer has three outputs that are redundant at low frequencies. The two aligned LIGO interferometers at Hanford WA are redundant, and the LIGO detector at Livingston LA is nearly redundant with either of the Hanford detectors. Redundant networks have a powerful veto against spurious noise, a linear combination of the detector outputs that contains no gravitational wave signal. For LISA, this 'null' output is known as the Sagnac mode, and its use in discriminating between detector noise and a cosmological gravitational wave background is well understood. But the usefulness of the null veto for ground-based detector networks has been ignored until now. We show that it should make it possible to discriminate in a model-independent way between real gravitational waves and accidentally coincident non-Gaussian noise 'events' in redundant networks of two or more broadband detectors. It has been shown that with three detectors, the null output can even be used to locate the direction to the source, and then two other linear combinations of detector outputs give the optimal 'coherent' reconstruction of the two polarization components of the signal. We discuss briefly the implementation of such a detection strategy in realistic networks, where signals are weak, detector calibration is a significant uncertainty, and the various detectors may have different (but overlapping) observing bands

DETERMINING THE EFFECT (THE SOCIAL COSTS OF EXCLUSION UNDER THE SOUTH AFRICAN EXCLUSIONARY RULE: SHOULD FACTUAL GUILT TILT THE SCALES IN FAVOUR OF THE ADMISSION OF UNCONSTITUTIONALLY OBTAINED EVIDENCE?

Directory of Open Access Journals (Sweden)

D Ally

2012-12-01

Full Text Available Section 35(5 of the Constitution of the Republic of South Africa, 1996 governs the exclusion of unconstitutionally obtained evidence in criminal trials. Three groups of factors must be considered to assess whether unconstitutionally obtained evidence should either be excluded or admitted. This contribution is focussed on the third group of factors (also known as the "effect of exclusion", or the "social costs of exclusion" which consists of the "seriousness of the charge faced by the accused", and the "importance of the evidence to secure a conviction". This group of factors is concerned with the public interest in crime control. Some scholars argue that the "public mood" should be a weighty factor when our courts consider this group of factors. Against this background this article considers three issues: First, whether considerable weight should be attached to the "current mood" of society when our courts weigh and balance this group of factors against other relevant factors; secondly, whether a consideration of the "seriousness of the charge" and the "importance of the evidence for a successful prosecution" could possibly encroach upon the presumption of innocence; and, thirdly, whether factual guilt should be allowed to tip the scales in favour of the admission of unconstitutionally obtained evidence when the evidence is crucial for a conviction on a serious charge.

Prolonged minor allograft survival in intravenously primed mice--a test of the veto hypothesis

International Nuclear Information System (INIS)

Johnson, L.L.

1987-01-01

Experiments were performed to test the hypothesis that veto cells are responsible for the prolonged survival of minor allografts of skin that is observed in recipients primed intravenously with spleen cells from mice syngeneic with the skin donors. This prolonged survival was observed for each of several minor histocompatibility (H) antigens and is antigen-specific. Gamma radiation (3300 rads) abolished the ability of male spleen cells infused i.v. to delay the rejection of male skin grafts (H-Y antigen) on female recipients. However, depletion of Thy-1+ cells from the i.v. infusion failed to abolish the ability to prolong male skin graft survival. Furthermore, the prolonged survival accorded to B6 (H-2b) male skin grafts on CB6F1 (H-2b/H-2d) female recipients given i.v. infusions of B6 male spleen cells extended to BALB/c (H-2d) male skin grafts as well, indicating a lack of MHC restriction. Thus, prolongation of minor allograft survival by i.v. infusion of minor H antigen-bearing spleen cells appears not to depend on veto T cells that others have found to be responsible for the suppression of CTL generation

ADPF 347 AND THE “UNCONSTITUTIONAL STATE OF AFFAIRS” OF BRAZIL’S PRISON SYSTEM -- ADPF 347 E O “ESTADO DE COISAS INCONSTITUCIONAL” DO SISTEMA PRISIONAL BRASILEIRO

Directory of Open Access Journals (Sweden)

Thiago Luís Santos Sombra

2016-08-01

Full Text Available This essay aims at analyzing the main aspects related to a prison system’s lawsuit judged by the Brazilian Supreme Court in which the “Unconstitutional State of Affairs” adjudication technique was firstly examined. Challenging the base arguments that were presented in the ADPF 347, Justice Rapporteur Marco Aurélio, the article’s purpose is points out that there was not an institutional failure of both Legislative and Executive branches of government in order to justify a structural intervention for overcoming alleged barriers. A parallel with Colombian Supreme Court adjudication practices will be drawn in accordance with the legal transplants theory to understand how Brazil would achieve its reach just importing a structural injunction model that even in Colombia did not work in prisons. Keywords: Unconstitutional State of Affairs. Structural Injunction. ADPF 347. Brazil’s Supreme Court. Colombia’s Supreme Court. Legal Transplants.

Measurement of dijet production with a veto on additional central jet activity in pp collisions at $\\sqrt{s}$=7 TeV using the ATLAS detector

CERN Document Server

Aad, Georges; Abdallah, Jalal; Abdelalim, Ahmed Ali; Abdesselam, Abdelouahab; Abdinov, Ovsat; Abi, Babak; Abolins, Maris; Abramowicz, Halina; Abreu, Henso; Acerbi, Emilio; Acharya, Bobby Samir; Adams, David; Addy, Tetteh; Adelman, Jahred; Aderholz, Michael; Adomeit, Stefanie; Adragna, Paolo; Adye, Tim; Aefsky, Scott; Aguilar-Saavedra, Juan Antonio; Aharrouche, Mohamed; Ahlen, Steven; Ahles, Florian; Ahmad, Ashfaq; Ahsan, Mahsana; Aielli, Giulio; Akdogan, Taylan; Akesson, Torsten Paul; Akimoto, Ginga; Akimov, Andrei; Akiyama, Kunihiro; Alam, Mohammad; Alam, Muhammad Aftab; Albert, Justin; Albrand, Solveig; Aleksa, Martin; Aleksandrov, Igor; Alessandria, Franco; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Aliev, Malik; Alimonti, Gianluca; Alison, John; Aliyev, Magsud; Allport, Phillip; Allwood-Spiers, Sarah; Almond, John; Aloisio, Alberto; Alon, Raz; Alonso, Alejandro; Alviggi, Mariagrazia; Amako, Katsuya; Amaral, Pedro; Amelung, Christoph; Ammosov, Vladimir; Amorim, Antonio; Amoros, Gabriel; Amram, Nir; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Andrieux, Marie-Laure; Anduaga, Xabier; Angerami, Aaron; Anghinolfi, Francis; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoun, Sahar; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Arce, Ayana; Archambault, John-Paul; Arfaoui, Samir; Arguin, Jean-Francois; Arik, Engin; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnault, Christian; Artamonov, Andrei; Artoni, Giacomo; Arutinov, David; Asai, Shoji; Asfandiyarov, Ruslan; Ask, Stefan; Asman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astbury, Alan; Astvatsatourov, Anatoli; Atoian, Grigor; Aubert, Bernard; Auerbach, Benjamin; Auge, Etienne; Augsten, Kamil; Aurousseau, Mathieu; Austin, Nicholas; Avolio, Giuseppe; Avramidou, Rachel Maria; Axen, David; Ay, Cano; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baccaglioni, Giuseppe; Bacci, Cesare; Bach, Andre; Bachacou, Henri; Bachas, Konstantinos; Bachy, Gerard; Backes, Moritz; Backhaus, Malte; Badescu, Elisabeta; Bagnaia, Paolo; Bahinipati, Seema; Bai, Yu; Bailey, David; Bain, Travis; Baines, John; Baker, Oliver Keith; Baker, Mark; Baker, Sarah; Banas, Elzbieta; Banerjee, Piyali; Banerjee, Swagato; Banfi, Danilo; Bangert, Andrea Michelle; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barashkou, Andrei; Galtieri, Angela Barbaro; Barber, Tom; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Bardin, Dmitri; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimaraes da Costa, Joao; Barrillon, Pierre; Bartoldus, Rainer; Barton, Adam Edward; Bartsch, Detlef; Bartsch, Valeria; Bates, Richard; Batkova, Lucia; Batley, Richard; Battaglia, Andreas; Battistin, Michele; Battistoni, Giuseppe; Bauer, Florian; Bawa, Harinder Singh; Beare, Brian; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Beckingham, Matthew; Becks, Karl-Heinz; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Begel, Michael; Behar Harpaz, Silvia; Behera, Prafulla; Beimforde, Michael; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellina, Francesco; Bellomo, Massimiliano; Belloni, Alberto; Beloborodova, Olga; Belotskiy, Konstantin; Beltramello, Olga; Ben Ami, Sagi; Benary, Odette; Benchekroun, Driss; Benchouk, Chafik; Bendel, Markus; Benedict, Brian Hugues; Benekos, Nektarios; Benhammou, Yan; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Berglund, Elina; Beringer, Jurg; Bernardet, Karim; Bernat, Pauline; Bernhard, Ralf; Bernius, Catrin; Berry, Tracey; Bertin, Antonio; Bertinelli, Francesco; Bertolucci, Federico; Besana, Maria Ilaria; Besson, Nathalie; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biscarat, Catherine; Bitenc, Urban; Black, Kevin; Blair, Robert; Blanchard, Jean-Baptiste; Blanchot, Georges; Blazek, Tomas; Blocker, Craig; Blocki, Jacek; Blondel, Alain; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Boddy, Christopher Richard; Boehler, Michael; Boek, Jennifer; Boelaert, Nele; Boser, Sebastian; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Bolnet, Nayanka Myriam; Bona, Marcella; Bondarenko, Valery; Boonekamp, Maarten; Boorman, Gary; Booth, Chris; Bordoni, Stefania; Borer, Claudia; Borisov, Anatoly; Borissov, Guennadi; Borjanovic, Iris; Borroni, Sara; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Botterill, David; Bouchami, Jihene; Boudreau, Joseph; Bouhova-Thacker, Evelina Vassileva; Boulahouache, Chaouki; Bourdarios, Claire; Bousson, Nicolas; Boveia, Antonio; Boyd, James; Boyko, Igor; Bozhko, Nikolay; Bozovic-Jelisavcic, Ivanka; Bracinik, Juraj; Braem, Andre; Branchini, Paolo; Brandenburg, George; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brelier, Bertrand; Bremer, Johan; Brenner, Richard; Bressler, Shikma; Breton, Dominique; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Brodbeck, Timothy; Brodet, Eyal; Broggi, Francesco; Bromberg, Carl; Brooijmans, Gustaaf; Brooks, William; Brown, Gareth; Brown, Heather; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Buanes, Trygve; Bucci, Francesca; Buchanan, James; Buchanan, Norman; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Budick, Burton; Buscher, Volker; Bugge, Lars; Buira-Clark, Daniel; Bulekov, Oleg; Bunse, Moritz; Buran, Torleiv; Burckhart, Helfried; Burdin, Sergey; Burgess, Thomas; Burke, Stephen; Busato, Emmanuel; Bussey, Peter; Buszello, Claus-Peter; Butin, Francois; Butler, Bart; Butler, John; Buttar, Craig; Butterworth, Jonathan; Buttinger, William; Byatt, Tom; Cabrera Urban, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Caloi, Rita; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarri, Paolo; Cambiaghi, Mario; Cameron, David; Campana, Simone; Campanelli, Mario; Canale, Vincenzo; Canelli, Florencia; Canepa, Anadi; Cantero, Josu; Capasso, Luciano; Garrido, Maria Del Mar Capeans; Caprini, Irinel; Caprini, Mihai; Capriotti, Daniele; Capua, Marcella; Caputo, Regina; Caramarcu, Costin; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Bryan; Caron, Sascha; Montoya, German D.Carrillo; Carter, Antony; Carter, Janet; Carvalho, Joao; Casadei, Diego; Casado, Maria Pilar; Cascella, Michele; Caso, Carlo; Castaneda Hernandez, Alfredo Martin; Castaneda-Miranda, Elizabeth; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Cataldi, Gabriella; Cataneo, Fernando; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caughron, Seth; Cauz, Diego; Cavalleri, Pietro; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cetin, Serkant Ali; Cevenini, Francesco; Chafaq, Aziz; Chakraborty, Dhiman; Chan, Kevin; Chapleau, Bertrand; Chapman, John Derek; Chapman, John Wehrley; Chareyre, Eve; Charlton, Dave; Chavda, Vikash; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Shenjian; Chen, Tingyang; Chen, Xin; Cheng, Shaochen; Cheplakov, Alexander; Chepurnov, Vladimir; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Cheung, Sing-Leung; Chevalier, Laurent; Chiefari, Giovanni; Chikovani, Leila; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chizhov, Mihail; Choudalakis, Georgios; Chouridou, Sofia; Christidi, Illectra-Athanasia; Christov, Asen; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Ciapetti, Guido; Ciba, Krzysztof; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciobotaru, Matei Dan; Ciocca, Claudia; Ciocio, Alessandra; Cirilli, Manuela; Ciubancan, Mihai; Clark, Allan G.; Clark, Philip James; Cleland, Bill; Clemens, Jean-Claude; Clement, Benoit; Clement, Christophe; Clifft, Roger; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H.; Coe, Paul; Cogan, Joshua Godfrey; Coggeshall, James; Cogneras, Eric; Cojocaru, Claudiu; Colas, Jacques; Colijn, Auke-Pieter; Collard, Caroline; Collins, Neil; Collins-Tooth, Christopher; Collot, Johann; Colon, German; Conde Muino, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Consonni, Michele; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conventi, Francesco; Cook, James; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Cooper-Smith, Neil; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, Maria Jose; Costanzo, Davide; Costin, Tudor; Cote, David; Coura Torres, Rodrigo; Courneyea, Lorraine; Cowan, Glen; Cowden, Christopher; Cox, Brian; Cranmer, Kyle; Crescioli, Francesco; Cristinziani, Markus; Crosetti, Giovanni; Crupi, Roberto; Crepe-Renaudin, Sabine; Cuciuc, Constantin-Mihai; Cuenca Almenar, Cristobal; Donszelmann, Tulay Cuhadar; Curatolo, Maria; Curtis, Chris; Cwetanski, Peter; Czirr, Hendrik; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; D'Orazio, Alessia; Da Silva, Paulo Vitor; Da Via, Cinzia; Dabrowski, Wladyslaw; Dai, Tiesheng; Dallapiccola, Carlo; Dam, Mogens; Dameri, Mauro; Damiani, Daniel; Danielsson, Hans Olof; Dannheim, Dominik; Dao, Valerio; Darbo, Giovanni; Darlea, Georgiana Lavinia; Daum, Cornelis; Dauvergne, Jean-Pierre; Davey, Will; Davidek, Tomas; Davidson, Nadia; Davidson, Ruth; Davies, Eleanor; Davies, Merlin; Davison, Adam; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Dawson, John; Daya, Rozmin; De, Kaushik; De Asmundis, Riccardo; De Castro, Stefano; De Castro Faria Salgado, Pedro; De Cecco, Sandro; de Graat, Julien; De Groot, Nicolo; de Jong, Paul; de la Taille, Christophe; de la Torre, Hector; De Lotto, Barbara; De Mora, Lee; De Nooij, Lucie; De Oliveira Branco, Miguel; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; de Vivie De Regie, Jean-Baptiste; Dean, Simon; Dedovich, Dmitri; Degenhardt, James; Dehchar, Mohamed; del Papa, Carlo; del Peso, Jose; del Prete, Tarcisio; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delpierre, Pierre; Delruelle, Nicolas; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demirkoz, Bilge; Deng, Jianrong; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Devetak, Erik; Deviveiros, Pier-Olivier; Dewhurst, Alastair; DeWilde, Burton; Dhaliwal, Saminder; Dhullipudi, Ramasudhakar; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Luise, Silvestro; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Diaz, Marco Aurelio; Diblen, Faruk; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Yagci, Kamile Dindar; Dingfelder, Jochen; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Barros do Vale, Maria Aline; Do Valle Wemans, Andre; Doan, Thi Kieu Oanh; Dobbs, Matt; Dobinson, Robert; Dobos, Daniel; Dobson, Ellie; Dobson, Marc; Dodd, Jeremy; Doglioni, Caterina; Doherty, Tom; Doi, Yoshikuni; Dolejsi, Jiri; Dolenc, Irena; Dolezal, Zdenek; Dolgoshein, Boris; Dohmae, Takeshi; Donadelli, Marisilvia; Donega, Mauro; Donini, Julien; Dopke, Jens; Doria, Alessandra; dos Anjos, Andre; Dosil, Mireia; Dotti, Andrea; Dova, Maria-Teresa; Dowell, John; Doxiadis, Alexander; Doyle, Tony; Drasal, Zbynek; Drees, Jurgen; Dressnandt, Nandor; Drevermann, Hans; Driouichi, Chafik; Dris, Manolis; Dubbert, Jorg; Dubbs, Tim; Dube, Sourabh; Duchovni, Ehud; Duckeck, Guenter; Dudarev, Alexey; Dudziak, Fanny; Duhrssen, Michael; Duerdoth, Ian; Duflot, Laurent; Dufour, Marc-Andre; Dunford, Monica; Duran Yildiz, Hatice; Duxfield, Robert; Dwuznik, Michal; Dydak, Friedrich; Dzahini, Daniel; Duren, Michael; Ebenstein, William; Ebke, Johannes; Eckert, Simon; Eckweiler, Sebastian; Edmonds, Keith; Edwards, Clive; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Ehrich, Thies; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Eisenhandler, Eric; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Katherine; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Ely, Robert; Emeliyanov, Dmitry; Engelmann, Roderich; Engl, Albert; Epp, Brigitte; Eppig, Andrew; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Escobar, Carlos; Espinal Curull, Xavier; Esposito, Bellisario; Etienne, Francois; Etienvre, Anne-Isabelle; Etzion, Erez; Evangelakou, Despoina; Evans, Hal; Fabbri, Laura; Fabre, Caroline; Fakhrutdinov, Rinat; Falciano, Speranza; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farley, Jason; Farooque, Trisha; Farrington, Sinead; Farthouat, Philippe; Fassnacht, Patrick; Fassouliotis, Dimitrios; Fatholahzadeh, Baharak; Favareto, Andrea; Fayard, Louis; Fazio, Salvatore; Febbraro, Renato; Federic, Pavol; Fedin, Oleg; Fedorko, Woiciech; Fehling-Kaschek, Mirjam; Feligioni, Lorenzo; Fellmann, Denis; Felzmann, Ulrich; Feng, Cunfeng; Feng, Eric; Fenyuk, Alexander; Ferencei, Jozef; Ferland, Jonathan; Fernando, Waruna; Ferrag, Samir; Ferrando, James; Ferrara, Valentina; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferrer, Antonio; Ferrer, Maria Lorenza; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipcic, Andrej; Filippas, Anastasios; Filthaut, Frank; Fincke-Keeler, Margret; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Gordon; Fischer, Peter; Fisher, Matthew; Fisher, Steve; Flechl, Martin; Fleck, Ivor; Fleckner, Johanna; Fleischmann, Philipp; Fleischmann, Sebastian; Flick, Tobias; Flores Castillo, Luis; Flowerdew, Michael; Fohlisch, Florian; Fokitis, Manolis; Fonseca Martin, Teresa; Forbush, David Alan; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Foster, Joe; Fournier, Daniel; Foussat, Arnaud; Fowler, Andrew; Fowler, Ken; Fox, Harald; Francavilla, Paolo; Franchino, Silvia; Francis, David; Frank, Tal; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; Fratina, Sasa; French, Sky; Friedrich, Felix; Froeschl, Robert; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gadfort, Thomas; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Gallas, Elizabeth; Gallas, Manuel; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Galyaev, Eugene; Gan, K.K.; Gao, Yongsheng; Gapienko, Vladimir; Gaponenko, Andrei; Garberson, Ford; Garcia-Sciveres, Maurice; Garcia, Carmen; Garcia Navarro, Jose Enrique; Gardner, Robert; Garelli, Nicoletta; Garitaonandia, Hegoi; Garonne, Vincent; Garvey, John; Gatti, Claudio; Gaudio, Gabriella; Gaumer, Olivier; Gaur, Bakul; Gauthier, Lea; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gayde, Jean-Christophe; Gazis, Evangelos; Ge, Peng; Gee, Norman; Geerts, Daniel Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Helene; Gentile, Simonetta; George, Matthias; George, Simon; Gerlach, Peter; Gershon, Avi; Geweniger, Christoph; Ghazlane, Hamid; Ghez, Philippe; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giakoumopoulou, Victoria; Giangiobbe, Vincent; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Adam; Gibson, Stephen; Gilbert, Laura; Gilchriese, Murdock; Gilewsky, Valentin; Gillberg, Dag; Gillman, Tony; Gingrich, Douglas; Ginzburg, Jonatan; Giokaris, Nikos; Giordano, Raffaele; Giorgi, Francesco Michelangelo; Giovannini, Paola; Giraud, Pierre-Francois; Giugni, Danilo; Giunta, Michele; Giusti, Paolo; Gjelsten, Borge Kile; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glazov, Alexandre; Glitza, Karl-Walter; Glonti, George; Godfrey, Jennifer; Godlewski, Jan; Goebel, Martin; Gopfert, Thomas; Goeringer, Christian; Gossling, Claus; Gottfert, Tobias; Goldfarb, Steven; Goldin, Daniel; Golling, Tobias; Golovnia, Serguei; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Goncalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; Gonidec, Allain; Gonzalez, Saul; Gonzalez de la Hoz, Santiago; Gonzalez Silva, Laura; Gonzalez-Sevilla, Sergio; Goodson, Jeremiah Jet; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorfine, Grant; Gorini, Benedetto; Gorini, Edoardo; Gorisek, Andrej; Gornicki, Edward; Gorokhov, Serguei; Goryachev, Vladimir; Gosdzik, Bjoern; Gosselink, Martijn; Gostkin, Mikhail Ivanovitch; Gouanere, Michel; Gough Eschrich, Ivo; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Grabowska-Bold, Iwona; Grabski, Varlen; Grafstrom, Per; Grah, Christian; Grahn, Karl-Johan; Grancagnolo, Francesco; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Grau, Nathan; Gray, Heather; Gray, Julia Ann; Graziani, Enrico; Grebenyuk, Oleg; Greenfield, Debbie; Greenshaw, Timothy; Greenwood, Zeno Dixon; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grigalashvili, Nugzar; Grillo, Alexander; Grinstein, Sebastian; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Grognuz, Joel; Groh, Manfred; Gross, Eilam; Grosse-Knetter, Joern; Groth-Jensen, Jacob; Grybel, Kai; Guarino, Victor; Guest, Daniel; Guicheney, Christophe; Guida, Angelo; Guillemin, Thibault; Guindon, Stefan; Guler, Hulya; Gunther, Jaroslav; Guo, Bin; Guo, Jun; Gupta, Ambreesh; Gusakov, Yury; Gushchin, Vladimir; Gutierrez, Andrea; Gutierrez, Phillip; Guttman, Nir; Gutzwiller, Olivier; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haas, Stefan; Haber, Carl; Hackenburg, Robert; Hadavand, Haleh Khani; Hadley, David; Haefner, Petra; Hahn, Ferdinand; Haider, Stefan; Hajduk, Zbigniew; Hakobyan, Hrachya; Haller, Johannes; Hamacher, Klaus; Hamal, Petr; Hamilton, Andrew; Hamilton, Samuel; Han, Hongguang; Han, Liang; Hanagaki, Kazunori; Hance, Michael; Handel, Carsten; Hanke, Paul; Hansen, John Renner; Hansen, Jorgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hansson, Per; Hara, Kazuhiko; Hare, Gabriel; Harenberg, Torsten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Harrison, Karl; Hartert, Jochen; Hartjes, Fred; Haruyama, Tomiyoshi; Harvey, Alex; Hasegawa, Satoshi; Hasegawa, Yoji; Hassani, Samira; Hatch, Mark; Hauff, Dieter; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawes, Brian; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Donovan; Hayakawa, Takashi; Hayden, Daniel; Hayward, Helen; Haywood, Stephen; Hazen, Eric; He, Mao; Head, Simon; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heinemann, Beate; Heisterkamp, Simon; Helary, Louis; Heller, Mathieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, Robert; Henke, Michael; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Henry-Couannier, Frederic; Hensel, Carsten; Henss, Tobias; Medina Hernandez, Carlos; Hernandez Jimenez, Yesenia; Herrberg, Ruth; Hershenhorn, Alon David; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hessey, Nigel; Hidvegi, Attila; Higon-Rodriguez, Emilio; Hill, Daniel; Hill, John; Hill, Norman; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirsch, Florian; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoffman, Julia; Hoffmann, Dirk; Hohlfeld, Marc; Holder, Martin; Holmes, Alan; Holmgren, Sven-Olof; Holy, Tomas; Holzbauer, Jenny; Homma, Yasuhiro; Hong, Tae Min; Hooft van Huysduynen, Loek; Horazdovsky, Tomas; Horn, Claus; Horner, Stephan; Horton, Katherine; Hostachy, Jean-Yves; Hou, Suen; Houlden, Michael; Hoummada, Abdeslam; Howarth, James; Howell, David; Hristova, Ivana; Hrivnac, Julius; Hruska, Ivan; Hryn'ova, Tetiana; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Huang, Guang Shun; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Hughes-Jones, Richard; Huhtinen, Mika; Hurst, Peter; Hurwitz, Martina; Husemann, Ulrich; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibbotson, Michael; Ibragimov, Iskander; Ichimiya, Ryo; Iconomidou-Fayard, Lydia; Idarraga, John; Idzik, Marek; Iengo, Paolo; Igonkina, Olga; Ikegami, Yoichi; Ikeno, Masahiro; Ilchenko, Yuri; Iliadis, Dimitrios; Imbault, Didier; Imhaeuser, Martin; Imori, Masatoshi; Ince, Tayfun; Inigo-Golfin, Joaquin; Ioannou, Pavlos; Iodice, Mauro; Ionescu, Gelu; Irles Quiles, Adrian; Ishii, Koji; Ishikawa, Akimasa; Ishino, Masaya; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Ivashin, Anton; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, John; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakubek, Jan; Jana, Dilip; Jankowski, Ernest; Jansen, Eric; Jantsch, Andreas; Janus, Michel; Jarlskog, Goran; Jeanty, Laura; Jelen, Kazimierz; Jen-La Plante, Imai; Jenni, Peter; Jeremie, Andrea; Jez, Pavel; Jezequel, Stephane; Jha, Manoj Kumar; Ji, Haoshuang; Ji, Weina; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Ge; Jin, Shan; Jinnouchi, Osamu; Joergensen, Morten Dam; Joffe, David; Johansen, Lars; Johansen, Marianne; Johansson, Erik; Johansson, Per; Johnert, Sebastian; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tegid; Jones, Tim; Jonsson, Ove; Joram, Christian; Jorge, Pedro; Joseph, John; Jovin, Tatjana; Ju, Xiangyang; Juranek, Vojtech; Jussel, Patrick; Juste Rozas, Aurelio; Kabachenko, Vasily; Kabana, Sonja; Kaci, Mohammed; Kaczmarska, Anna; Kadlecik, Peter; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kaiser, Steffen; Kajomovitz, Enrique; Kalinin, Sergey; Kalinovskaya, Lidia; Kama, Sami; Kanaya, Naoko; Kaneda, Michiru; Kanno, Takayuki; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kaplon, Jan; Kar, Deepak; Karagoz, Muge; Karnevskiy, Mikhail; Karr, Kristo; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasmi, Azzedine; Kass, Richard; Kastanas, Alex; Kataoka, Mayuko; Kataoka, Yousuke; Katsoufis, Elias; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kayl, Manuel; Kazanin, Vassili; Kazarinov, Makhail; Keates, James Robert; Keeler, Richard; Kehoe, Robert; Keil, Markus; Kekelidze, George; Kelly, Marc; Kennedy, John; Kenney, Christopher John; Kenyon, Mike; Kepka, Oldrich; Kerschen, Nicolas; Kersevan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Ketterer, Christian; Keung, Justin; Khakzad, Mohsen; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Kharchenko, Dmitri; Khodinov, Alexander; Kholodenko, Anatoli; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Nikolai; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hyeon Jin; Kim, Min Suk; Kim, Peter; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; Kirk, Julie; Kirsch, Guillaume; Kirsch, Lawrence; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kittelmann, Thomas; Kiver, Andrey; Kiyamura, Hironori; Kladiva, Eduard; Klaiber-Lodewigs, Jonas; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klemetti, Miika; Klier, Amit; Klimentov, Alexei; Klingenberg, Reiner; Klinkby, Esben; Klioutchnikova, Tatiana; Klok, Peter; Klous, Sander; Kluge, Eike-Erik; Kluge, Thomas; Kluit, Peter; Kluth, Stefan; Knecht, Neil; Kneringer, Emmerich; Knobloch, Juergen; Knoops, Edith; Knue, Andrea; Ko, Byeong Rok; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kocnar, Antonin; Kodys, Peter; Koneke, Karsten; Konig, Adriaan; Koenig, Sebastian; Kopke, Lutz; Koetsveld, Folkert; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kohn, Fabian; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kokott, Thomas; Kolachev, Guennady; Kolanoski, Hermann; Kolesnikov, Vladimir; Koletsou, Iro; Koll, James; Kollar, Daniel; Kollefrath, Michael; Kolya, Scott; Komar, Aston; Komaragiri, Jyothsna Rani; Komori, Yuto; Kondo, Takahiko; Kono, Takanori; Kononov, Anatoly; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kootz, Andreas; Koperny, Stefan; Kopikov, Sergey; Korcyl, Krzysztof; Kordas, Kostantinos; Koreshev, Victor; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotamaki, Miikka Juhani; Kotov, Sergey; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, James; Kreisel, Arik; Krejci, Frantisek; Kretzschmar, Jan; Krieger, Nina; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Kruger, Hans; Kruker, Tobias; Krumshteyn, Zinovii; Kruth, Andre; Kubota, Takashi; Kuehn, Susanne; Kugel, Andreas; Kuhl, Thorsten; Kuhn, Dietmar; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kummer, Christian; Kuna, Marine; Kundu, Nikhil; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurata, Masakazu; Kurochkin, Yurii; Kus, Vlastimil; Kuykendall, William; Kuze, Masahiro; Kuzhir, Polina; Kvasnicka, Ondrej; Kvita, Jiri; Kwee, Regina; La Rosa, Alessandro; La Rotonda, Laura; Labarga, Luis; Labbe, Julien; Lablak, Said; Lacasta, Carlos; Lacava, Francesco; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramon; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laisne, Emmanuel; Lamanna, Massimo; Lampen, Caleb; Lampl, Walter; Lancon, Eric; Landgraf, Ulrich; Landon, Murrough; Landsman, Hagar; Lane, Jenna; Lange, Clemens; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Larionov, Anatoly; Larner, Aimee; Lasseur, Christian; Lassnig, Mario; Laurelli, Paolo; Lavorato, Antonia; Lavrijsen, Wim; Laycock, Paul; Lazarev, Alexandre; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Maner, Christophe; Le Menedeu, Eve; Lebel, Celine; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Michel; Legendre, Marie; Leger, Annie; LeGeyt, Benjamin; Legger, Federica; Leggett, Charles; Lehmacher, Marc; Lehmann Miotto, Giovanna; Lei, Xiaowen; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lellouch, Jeremie; Leltchouk, Mikhail; Lemmer, Boris; Lendermann, Victor; Leney, Katharine; Lenz, Tatiana; Lenzen, Georg; Lenzi, Bruno; Leonhardt, Kathrin; Leontsinis, Stefanos; Leroy, Claude; Lessard, Jean-Raphael; Lesser, Jonas; Lester, Christopher; Leung Fook Cheong, Annabelle; Leveque, Jessica; Levin, Daniel; Levinson, Lorne; Levitski, Mikhail; Lewandowska, Marta; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bo; Li, Haifeng; Li, Shu; Li, Xuefei; Liang, Zhihua; Liang, Zhijun; Liberti, Barbara; Lichard, Peter; Lichtnecker, Markus; Lie, Ki; Liebig, Wolfgang; Lifshitz, Ronen; Lilley, Joseph; Limbach, Christian; Limosani, Antonio; Limper, Maaike; Lin, Simon; Linde, Frank; Linnemann, James; Lipeles, Elliot; Lipinsky, Lukas; Lipniacka, Anna; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Chuanlei; Liu, Dong; Liu, Hao; Liu, Jianbei; Liu, Minghui; Liu, Shengli; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Lockwitz, Sarah; Loddenkoetter, Thomas; Loebinger, Fred; Loginov, Andrey; Loh, Chang Wei; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Loken, James; Lombardo, Vincenzo Paolo; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Losada, Marta; Loscutoff, Peter; Sterzo, Francesco Lo; Losty, Michael; Lou, Xinchou; Lounis, Abdenour; Loureiro, Karina; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Ludwig, Andreas; Ludwig, Dorthe; Ludwig, Inga; Ludwig, Jens; Luehring, Frederick; Luijckx, Guy; Lumb, Debra; Luminari, Lamberto; Lund, Esben; Lund-Jensen, Bengt; Lundberg, Bjorn; Lundberg, Johan; Lundquist, Johan; Lungwitz, Matthias; Lupi, Anna; Lutz, Gerhard; Lynn, David; Lys, Jeremy; Lytken, Else; Ma, Hong; Ma, Lian Liang; Macana Goia, Jorge Andres; Maccarrone, Giovanni; Macchiolo, Anna; Macek, Bostjan; Machado Miguens, Joana; Macina, Daniela; Mackeprang, Rasmus; Madaras, Ronald; Mader, Wolfgang; Maenner, Reinhard; Maeno, Tadashi; Mattig, Peter; Mattig, Stefan; Magalhaes Martins, Paulo Jorge; Magnoni, Luca; Magradze, Erekle; Mahalalel, Yair; Mahboubi, Kambiz; Mahout, Gilles; Maiani, Camilla; Maidantchik, Carmen; Maio, Amelia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malecki, Pawel; Malecki, Piotr; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mameghani, Raphael; Mamuzic, Judita; Manabe, Atsushi; Mandelli, Luciano; Mandic, Igor; Mandrysch, Rocco; Maneira, Jose; Mangeard, Pierre-Simon; Manjavidze, Ioseb; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Manz, Andreas; Mapelli, Alessandro; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchese, Fabrizio; Marchiori, Giovanni; Marcisovsky, Michal; Marin, Alexandru; Marino, Christopher; Marroquim, Fernando; Marshall, Robin; Marshall, Zach; Martens, Kalen; Marti-Garcia, Salvador; Martin, Andrew; Martin, Brian; Martin, Brian Thomas; Martin, Franck Francois; Martin, Jean-Pierre; Martin, Philippe; Martin, Tim; Martin Dit Latour, Bertrand; Martin--Haugh, Stewart; Martinez, Mario; Martinez Outschoorn, Verena; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massaro, Graziano; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Mathes, Markus; Matricon, Pierre; Matsumoto, Hiroshi; Matsunaga, Hiroyuki; Matsushita, Takashi; Mattravers, Carly; Maugain, Jean-Marie; Maxfield, Stephen; Maximov, Dmitriy; May, Edward; Mayne, Anna; Mazini, Rachid; Mazur, Michael; Mazzanti, Marcello; Mazzoni, Enrico; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; McGlone, Helen; Mchedlidze, Gvantsa; McLaren, Robert Andrew; Mclaughlan, Tom; McMahon, Steve; McPherson, Robert; Meade, Andrew; Mechnich, Joerg; Mechtel, Markus; Medinnis, Mike; Meera-Lebbai, Razzak; Meguro, Tatsuma; Mehdiyev, Rashid; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meinhardt, Jens; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Mendoza Navas, Luis; Meng, Zhaoxia; Mengarelli, Alberto; Menke, Sven; Menot, Claude; Meoni, Evelin; Mercurio, Kevin Michael; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meuser, Stefan; Meyer, Carsten; Meyer, Jean-Pierre; Meyer, Jochen; Meyer, Joerg; Meyer, Thomas Christian; Meyer, W.Thomas; Miao, Jiayuan; Michal, Sebastien; Micu, Liliana; Middleton, Robin; Miele, Paola; Migas, Sylwia; Mijovic, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuz, Marko; Miller, David; Miller, Robert; Mills, Bill; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Minano, Mercedes; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Miralles Verge, Lluis; Misiejuk, Andrzej; Mitrevski, Jovan; Mitrofanov, Gennady; Mitsou, Vasiliki A.; Mitsui, Shingo; Miyagawa, Paul; Miyazaki, Kazuki; Mjornmark, Jan-Ulf; Moa, Torbjoern; Mockett, Paul; Moed, Shulamit; Moeller, Victoria; Monig, Klaus; Moser, Nicolas; Mohapatra, Soumya; Mohr, Wolfgang; Mohrdieck-Mock, Susanne; Moisseev, Artemy; Moles-Valls, Regina; Molina-Perez, Jorge; Monk, James; Monnier, Emmanuel; Montesano, Simone; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Moorhead, Gareth; Mora Herrera, Clemencia; Moraes, Arthur; Morais, Antonio; Morange, Nicolas; Morel, Julien; Morello, Gianfranco; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morii, Masahiro; Morin, Jerome; Morita, Youhei; Morley, Anthony Keith; Mornacchi, Giuseppe; Morone, Maria-Christina; Morozov, Sergey; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Mudrinic, Mihajlo; Mueller, Felix; Mueller, James; Mueller, Klemens; Muller, Thomas; Muenstermann, Daniel; Muir, Alex; Munwes, Yonathan; Murakami, Koichi; Murray, Bill; Mussche, Ido; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nadal, Jordi; Nagai, Koichi; Nagano, Kunihiro; Nagasaka, Yasushi; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakano, Itsuo; Nanava, Gizo; Napier, Austin; Nash, Michael; Nation, Nigel; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Neal, Homer; Nebot, Eduardo; Nechaeva, Polina; Negri, Andrea; Negri, Guido; Nektarijevic, Snezana; Nelson, Silke; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Nesterov, Stanislav; Neubauer, Mark; Neusiedl, Andrea; Neves, Ricardo; Nevski, Pavel; Newman, Paul; Hong, Van Nguyen Thi; Nickerson, Richard; Nicolaidou, Rosy; Nicolas, Ludovic; Nicquevert, Bertrand; Niedercorn, Francois; Nielsen, Jason; Niinikoski, Tapio; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolaev, Kirill; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsen, Henrik; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nishiyama, Tomonori; Nisius, Richard; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Nordberg, Markus; Nordkvist, Bjoern; Norton, Peter; Novakova, Jana; Nozaki, Mitsuaki; Nozicka, Miroslav; Nozka, Libor; Nugent, Ian Michael; Nuncio-Quiroz, Adriana-Elizabeth; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; Nyman, Tommi; O'Brien, Brendan Joseph; O'Neale, Steve; O'Neil, Dugan; O'Shea, Val; Oakham, Gerald; Oberlack, Horst; Ocariz, Jose; Ochi, Atsuhiko; Oda, Susumu; Odaka, Shigeru; Odier, Jerome; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohshima, Takayoshi; Ohshita, Hidetoshi; Ohska, Tokio Kenneth; Ohsugi, Takashi; Okada, Shogo; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olcese, Marco; Olchevski, Alexander; Oliveira, Miguel Alfonso; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olivito, Dominick; Olszewski, Andrzej; Olszowska, Jolanta; Omachi, Chihiro; Onofre, Antonio; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlov, Iliya; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Osuna, Carlos; Otero y Garzon, Gustavo; Ottersbach, John; Ouchrif, Mohamed; Ould-Saada, Farid; Ouraou, Ahmimed; Ouyang, Qun; Owen, Mark; Owen, Simon; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagan Griso, Simone; Paganis, Efstathios; Paige, Frank; Pajchel, Katarina; Paleari, Chiara; Palestini, Sandro; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panes, Boris; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Panuskova, Monika; Paolone, Vittorio; Papadelis, Aras; Papadopoulou, Theodora; Paramonov, Alexander; Park, Woochun; Parker, Andy; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pasqualucci, Enrico; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pasztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pecsy, Martin; Pedraza Morales, Maria Isabel; Peleganchuk, Sergey; Peng, Haiping; Pengo, Ruggero; Penson, Alexander; Penwell, John; Perantoni, Marcelo; Perez, Kerstin; Cavalcanti, Tiago Perez; Perez Codina, Estel; Perez Garcia-Estan, Maria Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrino, Roberto; Perrodo, Pascal; Persembe, Seda; Peshekhonov, Vladimir; Peters, Onne; Petersen, Brian; Petersen, Jorgen; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Petschull, Dennis; Petteni, Michele; Pezoa, Raquel; Phan, Anna; Phillips, Alan; Phillips, Peter William; Piacquadio, Giacinto; Piccaro, Elisa; Piccinini, Maurizio; Pickford, Andrew; Piec, Sebastian Marcin; Piegaia, Ricardo; Pilcher, James; Pilkington, Andrew; Pina, Joao Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Ping, Jialun; Pinto, Belmiro; Pirotte, Olivier; Pizio, Caterina; Placakyte, Ringaile; Plamondon, Mathieu; Plano, Will; Pleier, Marc-Andre; Pleskach, Anatoly; Poblaguev, Andrei; Poddar, Sahill; Podlyski, Fabrice; Poggioli, Luc; Poghosyan, Tatevik; Pohl, Martin; Polci, Francesco; Polesello, Giacomo; Policicchio, Antonio; Polini, Alessandro; Poll, James; Polychronakos, Venetios; Pomarede, Daniel Marc; Pomeroy, Daniel; Pommes, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Bueso, Xavier Portell; Porter, Robert; Posch, Christoph; Pospelov, Guennady; Pospisil, Stanislav; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Prabhu, Robindra; Pralavorio, Pascal; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Pretzl, Klaus Peter; Pribyl, Lukas; Price, Darren; Price, Lawrence; Price, Michael John; Prichard, Paul; Prieur, Damien; Primavera, Margherita; Prokofiev, Kirill; Prokoshin, Fedor; Protopopescu, Serban; Proudfoot, James; Prudent, Xavier; Przysiezniak, Helenka; Psoroulas, Serena; Ptacek, Elizabeth; Purdham, John; Purohit, Milind; Puzo, Patrick; Pylypchenko, Yuriy; Qian, Jianming; Qian, Zuxuan; Qin, Zhonghua; Quadt, Arnulf; Quarrie, David; Quayle, William; Quinonez, Fernando; Raas, Marcel; Radescu, Voica; Radics, Balint; Rador, Tonguc; Ragusa, Francesco; Rahal, Ghita; Rahimi, Amir; Rahm, David; Rajagopalan, Srinivasan; Rammensee, Michael; Rammes, Marcus; Ramstedt, Magnus; Randle-Conde, Aidan Sean; Randrianarivony, Koloina; Ratoff, Peter; Rauscher, Felix; Rauter, Emanuel; Raymond, Michel; Read, Alexander Lincoln; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Reichold, Armin; Reinherz-Aronis, Erez; Reinsch, Andreas; Reisinger, Ingo; Reljic, Dusan; Rembser, Christoph; Ren, Zhongliang; Renaud, Adrien; Renkel, Peter; Rescigno, Marco; Resconi, Silvia; Resende, Bernardo; Reznicek, Pavel; Rezvani, Reyhaneh; Richards, Alexander; Richter, Robert; Richter-Was, Elzbieta; Ridel, Melissa; Rieke, Stefan; Rijpstra, Manouk; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Rios, Ryan Randy; Riu, Imma; Rivoltella, Giancesare; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robinson, Mary; Robson, Aidan; Rocha de Lima, Jose Guilherme; Roda, Chiara; Roda Dos Santos, Denis; Rodier, Stephane; Rodriguez, Diego; Roe, Adam; Roe, Shaun; Rohne, Ole; Rojo, Victoria; Rolli, Simona; Romaniouk, Anatoli; Romanov, Victor; Romeo, Gaston; Romero Maltrana, Diego; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Anthony; Rose, Matthew; Rosenbaum, Gabriel; Rosenberg, Eli; Rosendahl, Peter Lundgaard; Rosselet, Laurent; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rossi, Lucio; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexander; Rozen, Yoram; Ruan, Xifeng; Rubinskiy, Igor; Ruckert, Benjamin; Ruckstuhl, Nicole; Rud, Viacheslav; Rudolph, Christian; Rudolph, Gerald; Ruhr, Frederik; Ruggieri, Federico; Ruiz-Martinez, Aranzazu; Rulikowska-Zarebska, Elzbieta; Rumiantsev, Viktor; Rumyantsev, Leonid; Runge, Kay; Runolfsson, Ogmundur; Rurikova, Zuzana; Rusakovich, Nikolai; Rust, Dave; Rutherfoord, John; Ruwiedel, Christoph; Ruzicka, Pavel; Ryabov, Yury; Ryadovikov, Vasily; Ryan, Patrick; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Rzaeva, Sevda; Saavedra, Aldo; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salihagic, Denis; Salnikov, Andrei; Salt, Jose; Salvachua Ferrando, Belen; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Samset, Bjorn Hallvard; Sanchez, Arturo; Sandaker, Heidi; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sandvoss, Stephan; Sankey, Dave; Sansoni, Andrea; Santamarina Rios, Cibran; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Saraiva, Joao; Sarangi, Tapas; Sarkisyan-Grinbaum, Edward; Sarri, Francesca; Sartisohn, Georg; Sasaki, Osamu; Sasaki, Takashi; Sasao, Noboru; Satsounkevitch, Igor; Sauvage, Gilles; Sauvan, Emmanuel; Sauvan, Jean-Baptiste; Savard, Pierre; Savinov, Vladimir; Savu, Dan Octavian; Savva, Panagiota; Sawyer, Lee; Saxon, David; Says, Louis-Pierre; Sbarra, Carla; Sbrizzi, Antonio; Scallon, Olivia; Scannicchio, Diana; Schaarschmidt, Jana; Schacht, Peter; Schafer, Uli; Schaepe, Steffen; Schaetzel, Sebastian; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R. Dean; Schamov, Andrey; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schioppa, Marco; Schlenker, Stefan; Schlereth, James; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Sebastian; Schmitz, Martin; Schoning, Andre; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schram, Malachi; Schroeder, Christian; Schroer, Nicolai; Schuh, Silvia; Schuler, Georges; Schultes, Joachim; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Jan; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwanenberger, Christian; Schwartzman, Ariel; Schwemling, Philippe; Schwienhorst, Reinhard; Schwierz, Rainer; Schwindling, Jerome; Schwindt, Thomas; Scott, Bill; Searcy, Jacob; Sedykh, Evgeny; Segura, Ester; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, Jose; Sekhniaidze, Givi; Seliverstov, Dmitry; Sellden, Bjoern; Sellers, Graham; Seman, Michal; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Seuster, Rolf; Severini, Horst; Sevior, Martin; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shank, James; Shao, Qi Tao; Shapiro, Marjorie; Shatalov, Pavel; Shaver, Leif; Shaw, Christian; Shaw, Kate; Sherman, Daniel; Sherwood, Peter; Shibata, Akira; Shichi, Hideharu; Shimizu, Shima; Shimojima, Makoto; Shin, Taeksu; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shupe, Michael; Sicho, Petr; Sidoti, Antonio; Siebel, Anca-Mirela; Siegert, Frank; Siegrist, James; Sijacki, Djordje; Silbert, Ohad; Silva, Jose; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simmons, Brinick; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjolin, Jorgen; Sjursen, Therese; Skinnari, Louise Anastasia; Skovpen, Kirill; Skubic, Patrick; Skvorodnev, Nikolai; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Sloan, Terrence; Sloper, John erik; Smakhtin, Vladimir; Smirnov, Sergei; Smirnova, Lidia; Smirnova, Oxana; Smith, Ben Campbell; Smith, Douglas; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snow, Steve; Snow, Joel; Snuverink, Jochem; Snyder, Scott; Soares, Mara; Sobie, Randall; Sodomka, Jaromir; Soffer, Abner; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solfaroli Camillocci, Elena; Solodkov, Alexander; Solovyanov, Oleg; Sondericker, John; Soni, Nitesh; Sopko, Vit; Sopko, Bruno; Sorbi, Massimo; Sosebee, Mark; Soukharev, Andrey; Spagnolo, Stefania; Spano, Francesco; Spighi, Roberto; Spigo, Giancarlo; Spila, Federico; Spiriti, Eleuterio; Spiwoks, Ralf; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St. Denis, Richard Dante; Stahl, Thorsten; Stahlman, Jonathan; Stamen, Rainer; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staude, Arnold; Stavina, Pavel; Stavropoulos, Georgios; Steele, Genevieve; Steinbach, Peter; Steinberg, Peter; Stekl, Ivan; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stevenson, Kyle; Stewart, Graeme; Stillings, Jan Andre; Stockmanns, Tobias; Stockton, Mark; Stoerig, Kathrin; Stoicea, Gabriel; Stonjek, Stefan; Strachota, Pavel; Stradling, Alden; Straessner, Arno; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strang, Michael; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Strohmer, Raimund; Strom, David; Strong, John; Stroynowski, Ryszard; Strube, Jan; Stugu, Bjarne; Stumer, Iuliu; Stupak, John; Sturm, Philipp; Soh, Dart-yin; Su, Dong; Subramania, Halasya Siva; Succurro, Antonella; Sugaya, Yorihito; Sugimoto, Takuya; Suhr, Chad; Suita, Koichi; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Sushkov, Serge; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Svatos, Michal; Sviridov, Yuri; Swedish, Stephen; Sykora, Ivan; Sykora, Tomas; Szeless, Balazs; Sanchez, Javier; Ta, Duc; Tackmann, Kerstin; Taffard, Anyes; Tafirout, Reda; Taga, Adrian; Taiblum, Nimrod; Takahashi, Yuta; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Talby, Mossadek; Talyshev, Alexey; Tamsett, Matthew; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanaka, Yoshito; Tani, Kazutoshi; Tannoury, Nancy; Tappern, Geoffrey; Tapprogge, Stefan; Tardif, Dominique; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tassi, Enrico; Tatarkhanov, Mous; Taylor, Christopher; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Terada, Susumu; Terashi, Koji; Terron, Juan; Terwort, Mark; Testa, Marianna; Teuscher, Richard; Thadome, Jocelyn; Therhaag, Jan; Theveneaux-Pelzer, Timothee; Thioye, Moustapha; Thoma, Sascha; Thomas, Juergen; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Stan; Thomson, Evelyn; Thomson, Mark; Thun, Rudolf; Tian, Feng; Tic, Tom\\'{a}\\v{s}; Tikhomirov, Vladimir; Tikhonov, Yury; Timmermans, Charles; Tipton, Paul; Viegas, Florbela De Jes Tique Aires; Tisserant, Sylvain; Tobias, Jurgen; Toczek, Barbara; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokar, Stanislav; Tokunaga, Kaoru; Tokushuku, Katsuo; Tollefson, Kirsten; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Tong, Guoliang; Tonoyan, Arshak; Topfel, Cyril; Topilin, Nikolai; Torchiani, Ingo; Torrence, Eric; Torres, Heberth; Torro Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Traynor, Daniel; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alesandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Trinh, Thi Nguyet; Tripiana, Martin; Trischuk, William; Trivedi, Arjun; Trocme, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiakiris, Menelaos; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsung, Jieh-Wen; Tsuno, Soshi; Tsybychev, Dmitri; Tua, Alan; Tuggle, Joseph; Turala, Michal; Turecek, Daniel; Turk Cakir, Ilkay; Turlay, Emmanuel; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Tyrvainen, Harri; Tzanakos, George; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ugland, Maren; Uhlenbrock, Mathias; Uhrmacher, Michael; Ukegawa, Fumihiko; Unal, Guillaume; Underwood, David; Undrus, Alexander; Unel, Gokhan; Unno, Yoshinobu; Urbaniec, Dustin; Urkovsky, Evgeny; Urrejola, Pedro; Usai, Giulio; Uslenghi, Massimiliano; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Vahsen, Sven; Valenta, Jan; Valente, Paolo; Valentinetti, Sara; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Ferrer, Juan Antonio Valls; Van der Graaf, Harry; van der Kraaij, Erik; van der Leeuw, Robin; van der Poel, Egge; van der Ster, Daniel; Van Eijk, Bob; van Eldik, Niels; Van Gemmeren, Peter; van Kesteren, Zdenko; Van Vulpen, Ivo; Vandelli, Wainer; Vandoni, Giovanna; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Varela Rodriguez, Fernando; Vari, Riccardo; Varnes, Erich; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vassilakopoulos, Vassilios; Vazeille, Francois; Vegni, Guido; Veillet, Jean-Jacques; Vellidis, Constantine; Veloso, Filipe; Veness, Raymond; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Vichou, Irene; Vickey, Trevor; Viehhauser, Georg; Viel, Simon; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinek, Elisabeth; Vinogradov, Vladimir; Virchaux, Marc; Virzi, Joseph; Vitells, Ofer; Viti, Michele; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vlasak, Michal; Vlasov, Nikolai; Vogel, Adrian; Vokac, Petr; Volpi, Guido; Volpi, Matteo; Volpini, Giovanni; von der Schmitt, Hans; von Loeben, Joerg; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorobiev, Alexander; Vorwerk, Volker; Vos, Marcel; Voss, Rudiger; Voss, Thorsten Tobias; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Anh, Tuan Vu; Vuillermet, Raphael; Vukotic, Ilija; Wagner, Wolfgang; Wagner, Peter; Wahlen, Helmut; Wakabayashi, Jun; Walbersloh, Jorg; Walch, Shannon; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Wang, Chiho; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Joshua C.; Wang, Rui; Wang, Song-Ming; Warburton, Andreas; Ward, Patricia; Warsinsky, Markus; Watkins, Peter; Watson, Alan; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Anthony; Waugh, Ben; Weber, Jens; Weber, Marc; Weber, Michele; Weber, Pavel; Weidberg, Anthony; Weigell, Philipp; Weingarten, Jens; Weiser, Christian; Wellenstein, Hermann; Wells, Phillippa; Wen, Mei; Wenaus, Torre; Wendler, Shanti; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Werth, Michael; Wessels, Martin; Weydert, Carole; Whalen, Kathleen; Wheeler-Ellis, Sarah Jane; Whitaker, Scott; White, Andrew; White, Martin; White, Sebastian; Whitehead, Samuel Robert; Whiteson, Daniel; Whittington, Denver; Wicek, Francois; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilhelm, Ivan; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Eric; Williams, Hugh; Willis, William; Willocq, Stephane; Wilson, John; Wilson, Michael Galante; Wilson, Alan; Wingerter-Seez, Isabelle; Winkelmann, Stefan; Winklmeier, Frank; Wittgen, Matthias; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wong, Wei-Cheng; Wooden, Gemma; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wraight, Kenneth; Wright, Catherine; Wrona, Bozydar; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wunstorf, Renate; Wynne, Benjamin; Xaplanteris, Leonidas; Xella, Stefania; Xie, Song; Xie, Yigang; Xu, Chao; Xu, Da; Xu, Guofa; Yabsley, Bruce; Yacoob, Sahal; Yamada, Miho; Yamaguchi, Hiroshi; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamaoka, Jared; Yamazaki, Takayuki; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Un-Ki; Yang, Yi; Yang, Yi; Yang, Zhaoyu; Yanush, Serguei; Yao, Weiming; Yao, Yushu; Yasu, Yoshiji; Ybeles Smit, Gabriel Valentijn; Ye, Jingbo; Ye, Shuwei; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Riktura; Young, Charles; Youssef, Saul; Yu, Dantong; Yu, Jaehoon; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Zaets, Vassilli; Zaidan, Remi; Zaitsev, Alexander; Zajacova, Zuzana; Zalite, Youris; Zanello, Lucia; Zarzhitsky, Pavel; Zaytsev, Alexander; Zeitnitz, Christian; Zeller, Michael; Zemla, Andrzej; Zendler, Carolin; Zenin, Oleg; Zenis, Tibor; Zenonos, Zenonas; Zenz, Seth; Zerwas, Dirk; Zevi Della Porta, Giovanni; Zhan, Zhichao; Zhang, Dongliang; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Long; Zhao, Tianchi; Zhao, Zhengguo; Zhemchugov, Alexey; Zheng, Shuchen; Zhong, Jiahang; Zhou, Bing; Zhou, Ning; Zhou, Yue; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhuravlov, Vadym; Zieminska, Daria; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Ziolkowski, Michael; Zitoun, Robert; Zivkovic, Lidija; Zmouchko, Viatcheslav; Zobernig, Georg; Zoccoli, Antonio; Zolnierowski, Yves; Zsenei, Andras; zur Nedden, Martin; Zutshi, Vishnu; Zwalinski, Lukasz

2011-01-01

A measurement of jet activity in the rapidity interval bounded by a dijet system is presented. Events are vetoed if a jet with transverse momentum greater than 20 GeV is found between the two boundary jets. The fraction of dijet events that survive the jet veto is presented for boundary jets that are separated by up to six units of rapidity and with mean transverse momentum 50 < pT(avg) < 500 GeV. The mean multiplicity of jets above the veto scale in the rapidity interval bounded by the dijet system is also presented as an alternative method for quantifying perturbative QCD emission. The data are compared to a next-to-leading order plus parton shower prediction from the POWHEG-BOX, an all-order resummation using the HEJ calculation and the PYTHIA, HERWIG++ and ALPGEN event generators. The measurement was performed using pp collisions at sqrt(s)=7 TeV using data recorded by the ATLAS detector in 2010.

Measurement of dijet production with a veto on additional central jet activity in pp collisions at $ \\sqrt {s} = 7 $ TeV using the ATLAS detector

Energy Technology Data Exchange (ETDEWEB)

Aad, G.; Abbott, B.; Abdallah, J.; Abdelalim, A. A.; Abdesselam, A.; Abdinov, O.; Abi, B.; Abolins, M.; Abramowicz, H.; Abreu, H.; Acerbi, E.; Acharya, B. S.; Adams, D. L.; Addy, T. N.; Adelman, J.; Aderholz, M.; Adomeit, S.; Adragna, P.; Adye, T.; Aefsky, S.; Aguilar-Saavedra, J. A.; Aharrouche, M.; Ahlen, S. P.; Ahles, F.; Ahmad, A.; Ahsan, M.; Aielli, G.; Akdogan, T.; Åkesson, T. P. A.; Akimoto, G.; Akimov, A. V.; Akiyama, A.; Alam, M. S.; Alam, M. A.; Albert, J.; Albrand, S.; Aleksa, M.; Aleksandrov, I. N.; Alessandria, F.; Alexa, C.; Alexander, G.; Alexandre, G.; Alexopoulos, T.; Alhroob, M.; Aliev, M.; Alimonti, G.; Alison, J.; Aliyev, M.; Allport, P. P.; Allwood-Spiers, S. E.; Almond, J.; Aloisio, A.; Alon, R.; Alonso, A.; Alviggi, M. G.; Amako, K.; Amaral, P.; Amelung, C.; Ammosov, V. V.; Amorim, A.; Amorós, G.; Amram, N.; Anastopoulos, C.; Ancu, L. S.; Andari, N.; Andeen, T.; Anders, C. F.; Anders, G.; Anderson, K. J.; Andreazza, A.; Andrei, V.; Andrieux, M-L.; Anduaga, X. S.; Angerami, A.; Anghinolfi, F.; Anjos, N.; Annovi, A.; Antonaki, A.; Antonelli, M.; Antonov, A.; Antos, J.; Anulli, F.; Aoun, S.; Aperio Bella, L.; Apolle, R.; Arabidze, G.; Aracena, I.; Arai, Y.; Arce, A. T. H.; Archambault, J. P.; Arfaoui, S.; Arguin, J-F.; Arik, E.; Arik, M.; Armbruster, A. J.; Arnaez, O.; Arnault, C.; Artamonov, A.; Artoni, G.; Arutinov, D.; Asai, S.; Asfandiyarov, R.; Ask, S.; Åsman, B.; Asquith, L.; Assamagan, K.; Astbury, A.; Astvatsatourov, A.; Atoian, G.; Aubert, B.; Auerbach, B.; Auge, E.; Augsten, K.; Aurousseau, M.; Austin, N.; Avolio, G.; Avramidou, R.; Axen, D.; Ay, C.; Azuelos, G.; Azuma, Y.; Baak, M. A.; Baccaglioni, G.; Bacci, C.; Bach, A. M.; Bachacou, H.; Bachas, K.; Bachy, G.; Backes, M.; Backhaus, M.; Badescu, E.; Bagnaia, P.; Bahinipati, S.; Bai, Y.; Bailey, D. C.; Bain, T.; Baines, J. T.; Baker, O. K.; Baker, M. D.; Baker, S.; Banas, E.; Banerjee, P.; Banerjee, Sw.; Banfi, D.; Bangert, A.; Bansal, V.; Bansil, H. S.; Barak, L.; Baranov, S. P.; Barashkou, A.; Galtieri, A. Barbaro; Barber, T.; Barberio, E. L.; Barberis, D.; Barbero, M.; Bardin, D. Y.; Barillari, T.; Barisonzi, M.; Barklow, T.; Barlow, N.; Barnett, B. M.; Barnett, R. M.; Baroncelli, A.; Barone, G.; Barr, A. J.; Barreiro, F.; Barreiro Guimarães da Costa, J.; Barrillon, P.; Bartoldus, R.; Barton, A. E.; Bartsch, D.; Bartsch, V.; Bates, R. L.; Batkova, L.; Batley, J. R.; Battaglia, A.; Battistin, M.; Battistoni, G.; Bauer, F.; Bawa, H. S.; Beare, B.; Beau, T.; Beauchemin, P. H.; Beccherle, R.; Bechtle, P.; Beck, H. P.; Beckingham, M.; Becks, K. H.; Beddall, A. J.; Beddall, A.; Bedikian, S.; Bednyakov, V. A.; Bee, C. P.; Begel, M.; Harpaz, S. Behar; Behera, P. K.; Beimforde, M.; Belanger-Champagne, C.; Bell, P. J.; Bell, W. H.; Bella, G.; Bellagamba, L.; Bellina, F.; Bellomo, M.; Belloni, A.; Beloborodova, O.; Belotskiy, K.; Beltramello, O.; Ami, S. Ben; Benary, O.; Benchekroun, D.; Benchouk, C.; Bendel, M.; Benedict, B. H.; Benekos, N.; Benhammou, Y.; Benjamin, D. P.; Benoit, M.; Bensinger, J. R.; Benslama, K.; Bentvelsen, S.; Berge, D.; Kuutmann, E. Bergeaas; Berger, N.; Berghaus, F.; Berglund, E.; Beringer, J.; Bernardet, K.; Bernat, P.; Bernhard, R.; Bernius, C.; Berry, T.; Bertin, A.; Bertinelli, F.; Bertolucci, F.; Besana, M. I.; Besson, N.; Bethke, S.; Bhimji, W.; Bianchi, R. M.; Bianco, M.; Biebel, O.; Bieniek, S. P.; Bierwagen, K.; Biesiada, J.; Biglietti, M.; Bilokon, H.; Bindi, M.; Binet, S.; Bingul, A.; Bini, C.; Biscarat, C.; Bitenc, U.; Black, K. M.; Blair, R. E.; Blanchard, J. -B.; Blanchot, G.; Blazek, T.; Blocker, C.; Blocki, J.; Blondel, A.; Blum, W.; Blumenschein, U.; Bobbink, G. J.; Bobrovnikov, V. B.; Bocchetta, S. S.; Bocci, A.; Boddy, C. R.; Boehler, M.; Boek, J.; Boelaert, N.; Böser, S.; Bogaerts, J. A.; Bogdanchikov, A.; Bogouch, A.; Bohm, C.; Boisvert, V.; Bold, T.; Boldea, V.; Bolnet, N. M.; Bona, M.; Bondarenko, V. G.; Boonekamp, M.; Boorman, G.; Booth, C. N.; Bordoni, S.; Borer, C.; Borisov, A.; Borissov, G.; Borjanovic, I.; Borroni, S.; Bos, K.; Boscherini, D.; Bosman, M.; Boterenbrood, H.; Botterill, D.; Bouchami, J.; Boudreau, J.; Bouhova-Thacker, E. V.; Boulahouache, C.; Bourdarios, C.; Bousson, N.; Boveia, A.; Boyd, J.; Boyko, I. R.; Bozhko, N. I.; Bozovic-Jelisavcic, I.; Bracinik, J.; Braem, A.; Branchini, P.; Brandenburg, G. W.; Brandt, A.; Brandt, G.; Brandt, O.; Bratzler, U.; Brau, B.; Brau, J. E.; Braun, H. M.; Brelier, B.; Bremer, J.; Brenner, R.; Bressler, S.; Breton, D.; Britton, D.; Brochu, F. M.; Brock, I.; Brock, R.; Brodbeck, T. J.; Brodet, E.; Broggi, F.; Bromberg, C.; Brooijmans, G.; Brooks, W. K.; Brown, G.; Brown, H.; Bruckman de Renstrom, P. A.; Bruncko, D.; Bruneliere, R.; Brunet, S.; Bruni, A.; Bruni, G.; Bruschi, M.; Buanes, T.; Bucci, F.; Buchanan, J.; Buchanan, N. J.; Buchholz, P.; Buckingham, R. M.; Buckley, A. G.; Buda, S. I.; Budagov, I. A.; Budick, B.; Büscher, V.; Bugge, L.; Buira-Clark, D.; Bulekov, O.; Bunse, M.; Buran, T.; Burckhart, H.; Burdin, S.; Burgess, T.; Burke, S.; Busato, E.; Bussey, P.; Buszello, C. P.; Butin, F.; Butler, B.; Butler, J. M.; Buttar, C. M.; Butterworth, J. M.; Buttinger, W.; Byatt, T.; Cabrera Urbán, S.; Caforio, D.; Cakir, O.; Calafiura, P.; Calderini, G.; Calfayan, P.; Calkins, R.; Caloba, L. P.; Caloi, R.; Calvet, D.; Calvet, S.; Toro, R. Camacho; Camarri, P.; Cambiaghi, M.; Cameron, D.; Campana, S.; Campanelli, M.; Canale, V.; Canelli, F.; Canepa, A.; Cantero, J.; Capasso, L.; Capeans Garrido, M. D. M.; Caprini, I.; Caprini, M.; Capriotti, D.; Capua, M.; Caputo, R.; Caramarcu, C.; Cardarelli, R.; Carli, T.; Carlino, G.; Carminati, L.; Caron, B.; Caron, S.; Carrillo Montoya, G. D.; Carter, A. A.; Carter, J. R.; Carvalho, J.; Casadei, D.; Casado, M. P.; Cascella, M.; Caso, C.; Hernandez, A. M. Castaneda; Castaneda-Miranda, E.; Gimenez, V. Castillo; Castro, N. F.; Cataldi, G.; Cataneo, F.; Catinaccio, A.; Catmore, J. R.; Cattai, A.; Cattani, G.; Caughron, S.; Cauz, D.; Cavalleri, P.; Cavalli, D.; Cavalli-Sforza, M.; Cavasinni, V.; Ceradini, F.; Cerqueira, A. S.; Cerri, A.; Cerrito, L.; Cerutti, F.; Cetin, S. A.; Cevenini, F.; Chafaq, A.; Chakraborty, D.; Chan, K.; Chapleau, B.; Chapman, J. D.; Chapman, J. W.; Chareyre, E.; Charlton, D. G.; Chavda, V.; Barajas, C. A. Chavez; Cheatham, S.; Chekanov, S.; Chekulaev, S. V.; Chelkov, G. A.; Chelstowska, M. A.; Chen, C.; Chen, H.; Chen, S.; Chen, T.; Chen, X.; Cheng, S.; Cheplakov, A.; Chepurnov, V. F.; El Moursli, R. Cherkaoui; Chernyatin, V.; Cheu, E.; Cheung, S. L.; Chevalier, L.; Chiefari, G.; Chikovani, L.; Childers, J. T.; Chilingarov, A.; Chiodini, G.; Chizhov, M. V.; Choudalakis, G.; Chouridou, S.; Christidi, I. A.; Christov, A.; Chromek-Burckhart, D.; Chu, M. L.; Chudoba, J.; Ciapetti, G.; Ciba, K.; Ciftci, A. K.; Ciftci, R.; Cinca, D.; Cindro, V.; Ciobotaru, M. D.; Ciocca, C.; Ciocio, A.; Cirilli, M.; Ciubancan, M.; Clark, A.; Clark, P. J.; Cleland, W.; Clemens, J. C.; Clement, B.; Clement, C.; Clifft, R. W.; Coadou, Y.; Cobal, M.; Coccaro, A.; Cochran, J.; Coe, P.; Cogan, J. G.; Coggeshall, J.; Cogneras, E.; Cojocaru, C. D.; Colas, J.; Colijn, A. P.; Collard, C.; Collins, N. J.; Collins-Tooth, C.; Collot, J.; Colon, G.; Muiño, P. Conde; Coniavitis, E.; Conidi, M. C.; Consonni, M.; Consorti, V.; Constantinescu, S.; Conta, C.; Conventi, F.; Cook, J.; Cooke, M.; Cooper, B. D.; Cooper-Sarkar, A. M.; Cooper-Smith, N. J.; Copic, K.; Cornelissen, T.; Corradi, M.; Corriveau, F.; Cortes-Gonzalez, A.; Cortiana, G.; Costa, G.; Costa, M. J.; Costanzo, D.; Costin, T.; Cˆoté, D.; Torres, R. Coura; Courneyea, L.; Cowan, G.; Cowden, C.; Cox, B. E.; Cranmer, K.; Crescioli, F.; Cristinziani, M.; Crosetti, G.; Crupi, R.; Crépé-Renaudin, S.; Cuciuc, C. -M.; Almenar, C. Cuenca; Donszelmann, T. Cuhadar; Curatolo, M.; Curtis, C. J.; Cwetanski, P.; Czirr, H.; Czyczula, Z.; D’Auria, S.; D’Onofrio, M.; D’Orazio, A.; Da Silva, P. V. M.; Da Via, C.; Dabrowski, W.; Dai, T.; Dallapiccola, C.; Dam, M.; Dameri, M.; Damiani, D. S.; Danielsson, H. O.; Dannheim, D.; Dao, V.; Darbo, G.; Darlea, G. L.; Daum, C.; Dauvergne, J. P.; Davey, W.; Davidek, T.; Davidson, N.; Davidson, R.; Davies, E.; Davies, M.; Davison, A. R.; Davygora, Y.; Dawe, E.; Dawson, I.; Dawson, J. W.; Daya, R. K.; De, K.; de Asmundis, R.; De Castro, S.; De Castro Faria Salgado, P. E.; De Cecco, S.; de Graat, J.; De Groot, N.; de Jong, P.; De La Taille, C.; De la Torre, H.; De Lotto, B.; De Mora, L.; De Nooij, L.; De Oliveira Branco, M.; De Pedis, D.; De Salvo, A.; De Sanctis, U.; De Santo, A.; De Vivie De Regie, J. B.; Dean, S.; Dedovich, D. V.; Degenhardt, J.; Dehchar, M.; Del Papa, C.; Del Peso, J.; Del Prete, T.; Deliyergiyev, M.; Dell’Acqua, A.; Dell’Asta, L.; Pietra, M. Della; della Volpe, D.; Delmastro, M.; Delpierre, P.; Delruelle, N.; Delsart, P. A.; Deluca, C.; Demers, S.; Demichev, M.; Demirkoz, B.; Deng, J.; Denisov, S. P.; Derendarz, D.; Derkaoui, J. E.; Derue, F.; Dervan, P.; Desch, K.; Devetak, E.; Deviveiros, P. O.; Dewhurst, A.; DeWilde, B.; Dhaliwal, S.; Dhullipudi, R.; Di Ciaccio, A.; Di Ciaccio, L.; Di Girolamo, A.; Di Girolamo, B.; Di Luise, S.; Di Mattia, A.; Di Micco, B.; Di Nardo, R.; Di Simone, A.; Di Sipio, R.; Diaz, M. A.; Diblen, F.; Diehl, E. B.; Dietrich, J.; Dietzsch, T. A.; Diglio, S.; Yagci, K. Dindar; Dingfelder, J.; Dionisi, C.; Dita, P.; Dita, S.; Dittus, F.; Djama, F.; Djobava, T.; do Vale, M. A. B.; Do Valle Wemans, A.; Doan, T. K. O.; Dobbs, M.; Dobinson, R.; Dobos, D.; Dobson, E.; Dobson, M.; Dodd, J.; Doglioni, C.; Doherty, T.; Doi, Y.; Dolejsi, J.; Dolenc, I.; Dolezal, Z.; Dolgoshein, B. A.; Dohmae, T.; Donadelli, M.; Donega, M.; Donini, J.; Dopke, J.; Doria, A.; Dos Anjos, A.; Dosil, M.; Dotti, A.; Dova, M. T.; Dowell, J. D.; Doxiadis, A. D.; Doyle, A. T.; Drasal, Z.; Drees, J.; Dressnandt, N.; Drevermann, H.; Driouichi, C.; Dris, M.; Dubbert, J.; Dubbs, T.; Dube, S.; Duchovni, E.; Duckeck, G.; Dudarev, A.; Dudziak, F.; Dührssen, M.; Duerdoth, I. P.; Duflot, L.; Dufour, M-A.; Dunford, M.; Duran Yildiz, H.; Duxfield, R.; Dwuznik, M.; Dydak, F.; Dzahini, D.; Düren, M.; Ebenstein, W. L.; Ebke, J.; Eckert, S.; Eckweiler, S.; Edmonds, K.; Edwards, C. A.; Edwards, N. C.; Ehrenfeld, W.; Ehrich, T.; Eifert, T.; Eigen, G.; Einsweiler, K.; Eisenhandler, E.; Ekelof, T.; El Kacimi, M.; Ellert, M.; Elles, S.; Ellinghaus, F.; Ellis, K.; Ellis, N.; Elmsheuser, J.; Elsing, M.; Ely, R.; Emeliyanov, D.; Engelmann, R.; Engl, A.; Epp, B.; Eppig, A.; Erdmann, J.; Ereditato, A.; Eriksson, D.; Ernst, J.; Ernst, M.; Ernwein, J.; Errede, D.; Errede, S.; Ertel, E.; Escalier, M.; Escobar, C.; Espinal Curull, X.; Esposito, B.; Etienne, F.; Etienvre, A. I.; Etzion, E.; Evangelakou, D.; Evans, H.; Fabbri, L.; Fabre, C.; Fakhrutdinov, R. M.; Falciano, S.; Fang, Y.; Fanti, M.; Farbin, A.; Farilla, A.; Farley, J.; Farooque, T.; Farrington, S. M.; Farthouat, P.; Fassnacht, P.; Fassouliotis, D.; Fatholahzadeh, B.; Favareto, A.; Fayard, L.; Fazio, S.; Febbraro, R.; Federic, P.; Fedin, O. L.; Fedorko, W.; Fehling-Kaschek, M.; Feligioni, L.; Fellmann, D.; Felzmann, C. U.; Feng, C.; Feng, E. J.; Fenyuk, A. B.; Ferencei, J.; Ferland, J.; Fernando, W.; Ferrag, S.; Ferrando, J.; Ferrara, V.; Ferrari, A.; Ferrari, P.; Ferrari, R.; Ferrer, A.; Ferrer, M. L.; Ferrere, D.; Ferretti, C.; Ferretto Parodi, A.; Fiascaris, M.; Fiedler, F.; Filipčič, A.; Filippas, A.; Filthaut, F.; Fincke-Keeler, M.; Fiolhais, M. C. N.; Fiorini, L.; Firan, A.; Fischer, G.; Fischer, P.; Fisher, M. J.; Fisher, S. M.; Flechl, M.; Fleck, I.; Fleckner, J.; Fleischmann, P.; Fleischmann, S.; Flick, T.; Flores Castillo, L. R.; Flowerdew, M. J.; Föhlisch, F.; Fokitis, M.; Martin, T. Fonseca; Forbush, D. A.; Formica, A.; Forti, A.; Fortin, D.; Foster, J. M.; Fournier, D.; Foussat, A.; Fowler, A. J.; Fowler, K.; Fox, H.; Francavilla, P.; Franchino, S.; Francis, D.; Frank, T.; Franklin, M.; Franz, S.; Fraternali, M.; Fratina, S.; French, S. T.; Friedrich, F.; Froeschl, R.; Froidevaux, D.; Frost, J. A.; Fukunaga, C.; Fullana Torregrosa, E.; Fuster, J.; Gabaldon, C.; Gabizon, O.; Gadfort, T.; Gadomski, S.; Gagliardi, G.; Gagnon, P.; Galea, C.; Gallas, E. J.; Gallas, M. V.; Gallo, V.; Gallop, B. J.; Gallus, P.; Galyaev, E.; Gan, K. K.; Gao, Y. S.; Gapienko, V. A.; Gaponenko, A.; Garberson, F.; Garcia-Sciveres, M.; García, C.; García Navarro, J. E.; Gardner, R. W.; Garelli, N.; Garitaonandia, H.; Garonne, V.; Garvey, J.; Gatti, C.; Gaudio, G.; Gaumer, O.; Gaur, B.; Gauthier, L.; Gavrilenko, I. L.; Gay, C.; Gaycken, G.; Gayde, J-C.; Gazis, E. N.; Ge, P.; Gee, C. N. P.; Geerts, D. A. A.; Geich-Gimbel, Ch.; Gellerstedt, K.; Gemme, C.; Gemmell, A.; Genest, M. H.; Gentile, S.; George, M.; George, S.; Gerlach, P.; Gershon, A.; Geweniger, C.; Ghazlane, H.; Ghez, P.; Ghodbane, N.; Giacobbe, B.; Giagu, S.; Giakoumopoulou, V.; Giangiobbe, V.; Gianotti, F.; Gibbard, B.; Gibson, A.; Gibson, S. M.; Gilbert, L. M.; Gilchriese, M.; Gilewsky, V.; Gillberg, D.; Gillman, A. R.; Gingrich, D. M.; Ginzburg, J.; Giokaris, N.; Giordano, R.; Giorgi, F. M.; Giovannini, P.; Giraud, P. F.; Giugni, D.; Giunta, M.; Giusti, P.; Gjelsten, B. K.; Gladilin, L. K.; Glasman, C.; Glatzer, J.; Glazov, A.; Glitza, K. W.; Glonti, G. L.; Godfrey, J.; Godlewski, J.; Goebel, M.; Göpfert, T.; Goeringer, C.; Gössling, C.; Göttfert, T.; Goldfarb, S.; Goldin, D.; Golling, T.; Golovnia, S. N.; Gomes, A.; Gomez Fajardo, L. S.; Gonçcalo, R.; Goncalves Pinto Firmino Da Costa, J.; Gonella, L.; Gonidec, A.; Gonzalez, S.; González de la Hoz, S.; Gonzalez Silva, M. L.; Gonzalez-Sevilla, S.; Goodson, J. J.; Goossens, L.; Gorbounov, P. A.; Gordon, H. A.; Gorelov, I.; Gorfine, G.; Gorini, B.; Gorini, E.; Gorišek, A.; Gornicki, E.; Gorokhov, S. A.; Goryachev, V. N.; Gosdzik, B.; Gosselink, M.; Gostkin, M. I.; Gouanère, M.; Eschrich, I. Gough; Gouighri, M.; Goujdami, D.; Goulette, M. P.; Goussiou, A. G.; Goy, C.; Grabowska-Bold, I.; Grabski, V.; Grafström, P.; Grah, C.; Grahn, K-J.; Grancagnolo, F.; Grancagnolo, S.; Grassi, V.; Gratchev, V.; Grau, N.; Gray, H. M.; Gray, J. A.; Graziani, E.; Grebenyuk, O. G.; Greenfield, D.; Greenshaw, T.; Greenwood, Z. D.; Gregor, I. M.; Grenier, P.; Griffiths, J.; Grigalashvili, N.; Grillo, A. A.; Grinstein, S.; Grishkevich, Y. V.; Grivaz, J. -F.; Grognuz, J.; Groh, M.; Gross, E.; Grosse-Knetter, J.; Groth-Jensen, J.; Grybel, K.; Guarino, V. J.; Guest, D.; Guicheney, C.; Guida, A.; Guillemin, T.; Guindon, S.; Guler, H.; Gunther, J.; Guo, B.; Guo, J.; Gupta, A.; Gusakov, Y.; Gushchin, V. N.; Gutierrez, A.; Gutierrez, P.; Guttman, N.; Gutzwiller, O.; Guyot, C.; Gwenlan, C.; Gwilliam, C. B.; Haas, A.; Haas, S.; Haber, C.; Hackenburg, R.; Hadavand, H. K.; Hadley, D. R.; Haefner, P.; Hahn, F.; Haider, S.; Hajduk, Z.; Hakobyan, H.; Haller, J.; Hamacher, K.; Hamal, P.; Hamilton, A.; Hamilton, S.; Han, H.; Han, L.; Hanagaki, K.; Hance, M.; Handel, C.; Hanke, P.; Hansen, J. R.; Hansen, J. B.; Hansen, J. D.; Hansen, P. H.; Hansson, P.; Hara, K.; Hare, G. A.; Harenberg, T.; Harkusha, S.; Harper, D.; Harrington, R. D.; Harris, O. M.; Harrison, K.; Hartert, J.; Hartjes, F.; Haruyama, T.; Harvey, A.; Hasegawa, S.; Hasegawa, Y.; Hassani, S.; Hatch, M.; Hauff, D.; Haug, S.; Hauschild, M.; Hauser, R.; Havranek, M.; Hawes, B. M.; Hawkes, C. M.; Hawkings, R. J.; Hawkins, D.; Hayakawa, T.; Hayden, D.; Hayward, H. S.; Haywood, S. J.; Hazen, E.; He, M.; Head, S. J.; Hedberg, V.; Heelan, L.; Heim, S.; Heinemann, B.; Heisterkamp, S.; Helary, L.; Heller, M.; Hellman, S.; Hellmich, D.; Helsens, C.; Henderson, R. C. W.; Henke, M.; Henrichs, A.; Henriques Correia, A. M.; Henrot-Versille, S.; Henry-Couannier, F.; Hensel, C.; Henß, T.; Hernandez, C. M.; Hernández Jiménez, Y.; Herrberg, R.; Hershenhorn, A. D.; Herten, G.; Hertenberger, R.; Hervas, L.; Hessey, N. P.; Hidvegi, A.; Higón-Rodriguez, E.; Hill, D.; Hill, J. C.; Hill, N.; Hiller, K. H.; Hillert, S.; Hillier, S. J.; Hinchliffe, I.; Hines, E.; Hirose, M.; Hirsch, F.; Hirschbuehl, D.; Hobbs, J.; Hod, N.; Hodgkinson, M. C.; Hodgson, P.; Hoecker, A.; Hoeferkamp, M. R.; Hoffman, J.; Hoffmann, D.; Hohlfeld, M.; Holder, M.; Holmes, A.; Holmgren, S. O.; Holy, T.; Holzbauer, J. L.; Homma, Y.; Hong, T. M.; Hooft van Huysduynen, L.; Horazdovsky, T.; Horn, C.; Horner, S.; Horton, K.; Hostachy, J-Y.; Hou, S.; Houlden, M. A.; Hoummada, A.; Howarth, J.; Howell, D. F.; Hristova, I.; Hrivnac, J.; Hruska, I.; Hryn’ova, T.; Hsu, P. J.; Hsu, S. -C.; Huang, G. S.; Hubacek, Z.; Hubaut, F.; Huegging, F.; Huffman, T. B.; Hughes, E. W.; Hughes, G.; Hughes-Jones, R. E.; Huhtinen, M.; Hurst, P.; Hurwitz, M.; Husemann, U.; Huseynov, N.; Huston, J.; Huth, J.; Iacobucci, G.; Iakovidis, G.; Ibbotson, M.; Ibragimov, I.; Ichimiya, R.; Iconomidou-Fayard, L.; Idarraga, J.; Idzik, M.; Iengo, P.; Igonkina, O.; Ikegami, Y.; Ikeno, M.; Ilchenko, Y.; Iliadis, D.; Imbault, D.; Imhaeuser, M.; Imori, M.; Ince, T.; Inigo-Golfin, J.; Ioannou, P.; Iodice, M.; Ionescu, G.; Irles Quiles, A.; Ishii, K.; Ishikawa, A.; Ishino, M.; Ishmukhametov, R.; Issever, C.; Istin, S.; Ivashin, A. V.; Iwanski, W.; Iwasaki, H.; Izen, J. M.; Izzo, V.; Jackson, B.; Jackson, J. N.; Jackson, P.; Jaekel, M. R.; Jain, V.; Jakobs, K.; Jakobsen, S.; Jakubek, J.; Jana, D. K.; Jankowski, E.; Jansen, E.; Jantsch, A.; Janus, M.; Jarlskog, G.; Jeanty, L.; Jelen, K.; Jen-La Plante, I.; Jenni, P.; Jeremie, A.; Jež, P.; Jézéquel, S.; Jha, M. K.; Ji, H.; Ji, W.; Jia, J.; Jiang, Y.; Jimenez Belenguer, M.; Jin, G.; Jin, S.; Jinnouchi, O.; Joergensen, M. D.; Joffe, D.; Johansen, L. G.; Johansen, M.; Johansson, K. E.; Johansson, P.; Johnert, S.; Johns, K. A.; Jon-And, K.; Jones, G.; Jones, R. W. L.; Jones, T. W.; Jones, T. J.; Jonsson, O.; Joram, C.; Jorge, P. M.; Joseph, J.; Jovin, T.; Ju, X.; Juranek, V.; Jussel, P.; Rozas, A. Juste; Kabachenko, V. V.; Kabana, S.; Kaci, M.; Kaczmarska, A.; Kadlecik, P.; Kado, M.; Kagan, H.; Kagan, M.; Kaiser, S.; Kajomovitz, E.; Kalinin, S.; Kalinovskaya, L. V.; Kama, S.; Kanaya, N.; Kaneda, M.; Kanno, T.; Kantserov, V. A.; Kanzaki, J.; Kaplan, B.; Kapliy, A.; Kaplon, J.; Kar, D.; Karagoz, M.; Karnevskiy, M.; Karr, K.; Kartvelishvili, V.; Karyukhin, A. N.; Kashif, L.; Kasmi, A.; Kass, R. D.; Kastanas, A.; Kataoka, M.; Kataoka, Y.; Katsoufis, E.; Katzy, J.; Kaushik, V.; Kawagoe, K.; Kawamoto, T.; Kawamura, G.; Kayl, M. S.; Kazanin, V. A.; Kazarinov, M. Y.; Keates, J. R.; Keeler, R.; Kehoe, R.; Keil, M.; Kekelidze, G. D.; Kelly, M.; Kennedy, J.; Kenney, C. J.; Kenyon, M.; Kepka, O.; Kerschen, N.; Kerševan, B. P.; Kersten, S.; Kessoku, K.; Ketterer, C.; Keung, J.; Khakzad, M.; Khalil-zada, F.; Khandanyan, H.; Khanov, A.; Kharchenko, D.; Khodinov, A.; Kholodenko, A. G.; Khomich, A.; Khoo, T. J.; Khoriauli, G.; Khoroshilov, A.; Khovanskiy, N.; Khovanskiy, V.; Khramov, E.; Khubua, J.; Kim, H.; Kim, M. S.; Kim, P. C.; Kim, S. H.; Kimura, N.; Kind, O.; King, B. T.; King, M.; King, R. S. B.; Kirk, J.; Kirsch, G. P.; Kirsch, L. E.; Kiryunin, A. E.; Kishimoto, T.; Kisielewska, D.; Kittelmann, T.; Kiver, A. M.; Kiyamura, H.; Kladiva, E.; Klaiber-Lodewigs, J.; Klein, M.; Klein, U.; Kleinknecht, K.; Klemetti, M.; Klier, A.; Klimentov, A.; Klingenberg, R.; Klinkby, E. B.; Klioutchnikova, T.; Klok, P. F.; Klous, S.; Kluge, E. -E.; Kluge, T.; Kluit, P.; Kluth, S.; Knecht, N. S.; Kneringer, E.; Knobloch, J.; Knoops, E. B. F. G.; Knue, A.; Ko, B. R.; Kobayashi, T.; Kobel, M.; Kocian, M.; Kocnar, A.; Kodys, P.; Köneke, K.; König, A. C.; Koenig, S.; Köpke, L.; Koetsveld, F.; Koevesarki, P.; Koffas, T.; Koffeman, E.; Kohn, F.; Kohout, Z.; Kohriki, T.; Koi, T.; Kokott, T.; Kolachev, G. M.; Kolanoski, H.; Kolesnikov, V.; Koletsou, I.; Koll, J.; Kollar, D.; Kollefrath, M.; Kolya, S. D.; Komar, A. A.; Komaragiri, J. R.; Komori, Y.; Kondo, T.; Kono, T.; Kononov, A. I.; Konoplich, R.; Konstantinidis, N.; Kootz, A.; Koperny, S.; Kopikov, S. V.; Korcyl, K.; Kordas, K.; Koreshev, V.; Korn, A.; Korol, A.; Korolkov, I.; Korolkova, E. V.; Korotkov, V. A.; Kortner, O.; Kortner, S.; Kostyukhin, V. V.; Kotamäki, M. J.; Kotov, S.; Kotov, V. M.; Kotwal, A.; Kourkoumelis, C.; Kouskoura, V.; Koutsman, A.; Kowalewski, R.; Kowalski, T. Z.; Kozanecki, W.; Kozhin, A. S.; Kral, V.; Kramarenko, V. A.; Kramberger, G.; Krasny, M. W.; Krasznahorkay, A.; Kraus, J.; Kreisel, A.; Krejci, F.; Kretzschmar, J.; Krieger, N.; Krieger, P.; Kroeninger, K.; Kroha, H.; Kroll, J.; Kroseberg, J.; Krstic, J.; Kruchonak, U.; Krüger, H.; Kruker, T.; Krumshteyn, Z. V.; Kruth, A.; Kubota, T.; Kuehn, S.; Kugel, A.; Kuhl, T.; Kuhn, D.; Kukhtin, V.; Kulchitsky, Y.; Kuleshov, S.; Kummer, C.; Kuna, M.; Kundu, N.; Kunkle, J.; Kupco, A.; Kurashige, H.; Kurata, M.; Kurochkin, Y. A.; Kus, V.; Kuykendall, W.; Kuze, M.; Kuzhir, P.; Kvasnicka, O.; Kvita, J.; Kwee, R.; La Rosa, A.; La Rotonda, L.; Labarga, L.; Labbe, J.; Lablak, S.; Lacasta, C.; Lacava, F.; Lacker, H.; Lacour, D.; Lacuesta, V. R.; Ladygin, E.; Lafaye, R.; Laforge, B.; Lagouri, T.; Lai, S.; Laisne, E.; Lamanna, M.; Lampen, C. L.; Lampl, W.; Lancon, E.; Landgraf, U.; Landon, M. P. J.; Landsman, H.; Lane, J. L.; Lange, C.; Lankford, A. J.; Lanni, F.; Lantzsch, K.; Laplace, S.; Lapoire, C.; Laporte, J. F.; Lari, T.; Larionov, A. V.; Larner, A.; Lasseur, C.; Lassnig, M.; Laurelli, P.; Lavorato, A.; Lavrijsen, W.; Laycock, P.; Lazarev, A. B.; Le Dortz, O.; Le Guirriec, E.; Le Maner, C.; Le Menedeu, E.; Lebel, C.; LeCompte, T.; Ledroit-Guillon, F.; Lee, H.; Lee, J. S. H.; Lee, S. C.; Lee, L.; Lefebvre, M.; Legendre, M.; Leger, A.; LeGeyt, B. C.; Legger, F.; Leggett, C.; Lehmacher, M.; Lehmann Miotto, G.; Lei, X.; Leite, M. A. L.; Leitner, R.; Lellouch, D.; Lellouch, J.; Leltchouk, M.; Lemmer, B.; Lendermann, V.; Leney, K. J. C.; Lenz, T.; Lenzen, G.; Lenzi, B.; Leonhardt, K.; Leontsinis, S.; Leroy, C.; Lessard, J-R.; Lesser, J.; Lester, C. G.; Leung Fook Cheong, A.; Levêque, J.; Levin, D.; Levinson, L. J.; Levitski, M. S.; Lewandowska, M.; Lewis, A.; Lewis, G. H.; Leyko, A. M.; Leyton, M.; Li, B.; Li, H.; Li, S.; Li, X.; Liang, Z.; Liang, Z.; Liberti, B.; Lichard, P.; Lichtnecker, M.; Lie, K.; Liebig, W.; Lifshitz, R.; Lilley, J. N.; Limbach, C.; Limosani, A.; Limper, M.; Lin, S. C.; Linde, F.; Linnemann, J. T.; Lipeles, E.; Lipinsky, L.; Lipniacka, A.; Liss, T. M.; Lissauer, D.; Lister, A.; Litke, A. M.; Liu, C.; Liu, D.; Liu, H.; Liu, J. B.; Liu, M.; Liu, S.; Liu, Y.; Livan, M.; Livermore, S. S. A.; Lleres, A.; Llorente Merino, J.; Lloyd, S. L.; Lobodzinska, E.; Loch, P.; Lockman, W. S.; Lockwitz, S.; Loddenkoetter, T.; Loebinger, F. K.; Loginov, A.; Loh, C. W.; Lohse, T.; Lohwasser, K.; Lokajicek, M.; Loken, J.; Lombardo, V. P.; Long, R. E.; Lopes, L.; Mateos, D. Lopez; Losada, M.; Loscutoff, P.; Sterzo, F. Lo; Losty, M. J.; Lou, X.; Lounis, A.; Loureiro, K. F.; Love, J.; Love, P. A.; Lowe, A. J.; Lu, F.; Lubatti, H. J.; Luci, C.; Lucotte, A.; Ludwig, A.; Ludwig, D.; Ludwig, I.; Ludwig, J.; Luehring, F.; Luijckx, G.; Lumb, D.; Luminari, L.; Lund, E.; Lund-Jensen, B.; Lundberg, B.; Lundberg, J.; Lundquist, J.; Lungwitz, M.; Lupi, A.; Lutz, G.; Lynn, D.; Lys, J.; Lytken, E.; Ma, H.; Ma, L. L.; Macana Goia, J. A.; Maccarrone, G.; Macchiolo, A.; Maček, B.; Machado Miguens, J.; Macina, D.; Mackeprang, R.; Madaras, R. J.; Mader, W. F.; Maenner, R.; Maeno, T.; Mättig, P.; Mättig, S.; Magalhaes Martins, P. J.; Magnoni, L.; Magradze, E.; Mahalalel, Y.; Mahboubi, K.; Mahout, G.; Maiani, C.; Maidantchik, C.; Maio, A.; Majewski, S.; Makida, Y.; Makovec, N.; Mal, P.; Malecki, Pa.; Malecki, P.; Maleev, V. P.; Malek, F.; Mallik, U.; Malon, D.; Maltezos, S.; Malyshev, V.; Malyukov, S.; Mameghani, R.; Mamuzic, J.; Manabe, A.; Mandelli, L.; Mandić, I.; Mandrysch, R.; Maneira, J.; Mangeard, P. S.; Manjavidze, I. D.; Mann, A.; Manning, P. M.; Manousakis-Katsikakis, A.; Mansoulie, B.; Manz, A.; Mapelli, A.; Mapelli, L.; March, L.; Marchand, J. F.; Marchese, F.; Marchiori, G.; Marcisovsky, M.; Marin, A.; Marino, C. P.; Marroquim, F.; Marshall, R.; Marshall, Z.; Martens, F. K.; Marti-Garcia, S.; Martin, A. J.; Martin, B.; Martin, B.; Martin, F. F.; Martin, J. P.; Martin, Ph.; Martin, T. A.; Martin dit Latour, B.; Martin-Haugh, S.; Martinez, M.; Martinez Outschoorn, V.; Martyniuk, A. C.; Marx, M.; Marzano, F.; Marzin, A.; Masetti, L.; Mashimo, T.; Mashinistov, R.; Masik, J.; Maslennikov, A. L.; Massa, I.; Massaro, G.; Massol, N.; Mastrandrea, P.; Mastroberardino, A.; Masubuchi, T.; Mathes, M.; Matricon, P.; Matsumoto, H.; Matsunaga, H.; Matsushita, T.; Mattravers, C.; Maugain, J. M.; Maxfield, S. J.; Maximov, D. A.; May, E. N.; Mayne, A.; Mazini, R.; Mazur, M.; Mazzanti, M.; Mazzoni, E.; Mc Kee, S. P.; McCarn, A.; McCarthy, R. L.; McCarthy, T. G.; McCubbin, N. A.; McFarlane, K. W.; Mcfayden, J. A.; McGlone, H.; Mchedlidze, G.; McLaren, R. A.; Mclaughlan, T.; McMahon, S. J.; McPherson, R. A.; Meade, A.; Mechnich, J.; Mechtel, M.; Medinnis, M.; Meera-Lebbai, R.; Meguro, T.; Mehdiyev, R.; Mehlhase, S.; Mehta, A.; Meier, K.; Meinhardt, J.; Meirose, B.; Melachrinos, C.; Mellado Garcia, B. R.; Mendoza Navas, L.; Meng, Z.; Mengarelli, A.; Menke, S.; Menot, C.; Meoni, E.; Mercurio, K. M.; Mermod, P.; Merola, L.; Meroni, C.; Merritt, F. S.; Messina, A.; Metcalfe, J.; Mete, A. S.; Meuser, S.; Meyer, C.; Meyer, J-P.; Meyer, J.; Meyer, J.; Meyer, T. C.; Meyer, W. T.; Miao, J.; Michal, S.; Micu, L.; Middleton, R. P.; Miele, P.; Migas, S.; Mijović, L.; Mikenberg, G.; Mikestikova, M.; Mikuž, M.; Miller, D. W.; Miller, R. J.; Mills, W. J.; Mills, C.; Milov, A.; Milstead, D. A.; Milstein, D.; Minaenko, A. A.; Miñano, M.; Minashvili, I. A.; Mincer, A. I.; Mindur, B.; Mineev, M.; Ming, Y.; Mir, L. M.; Mirabelli, G.; Verge, L. Miralles; Misiejuk, A.; Mitrevski, J.; Mitrofanov, G. Y.; Mitsou, V. A.; Mitsui, S.; Miyagawa, P. S.; Miyazaki, K.; Mjörnmark, J. U.; Moa, T.; Mockett, P.; Moed, S.; Moeller, V.; Mönig, K.; Möser, N.; Mohapatra, S.; Mohr, W.; Mohrdieck-Möck, S.; Moisseev, A. M.; Moles-Valls, R.; Molina-Perez, J.; Monk, J.; Monnier, E.; Montesano, S.; Monticelli, F.; Monzani, S.; Moore, R. W.; Moorhead, G. F.; Mora Herrera, C.; Moraes, A.; Morais, A.; Morange, N.; Morel, J.; Morello, G.; Moreno, D.; Moreno Llácer, M.; Morettini, P.; Morii, M.; Morin, J.; Morita, Y.; Morley, A. K.; Mornacchi, G.; Morone, M-C.; Morozov, S. V.; Morris, J. D.; Morvaj, L.; Moser, H. G.; Mosidze, M.; Moss, J.; Mount, R.; Mountricha, E.; Mouraviev, S. V.; Moyse, E. J. W.; Mudrinic, M.; Mueller, F.; Mueller, J.; Mueller, K.; Müller, T. A.; Muenstermann, D.; Muir, A.; Munwes, Y.; Murakami, K.; Murray, W. J.; Mussche, I.; Musto, E.; Myagkov, A. G.; Myska, M.; Nadal, J.; Nagai, K.; Nagano, K.; Nagasaka, Y.; Nairz, A. M.; Nakahama, Y.; Nakamura, K.; Nakano, I.; Nanava, G.; Napier, A.; Nash, M.; Nation, N. R.; Nattermann, T.; Naumann, T.; Navarro, G.; Neal, H. A.; Nebot, E.; Nechaeva, P. Yu.; Negri, A.; Negri, G.; Nektarijevic, S.; Nelson, S.; Nelson, T. K.; Nemecek, S.; Nemethy, P.; Nepomuceno, A. A.; Nessi, M.; Nesterov, S. Y.; Neubauer, M. S.; Neusiedl, A.; Neves, R. M.; Nevski, P.; Newman, P. R.; Nguyen Thi Hong, V.; Nickerson, R. B.; Nicolaidou, R.; Nicolas, L.; Nicquevert, B.; Niedercorn, F.; Nielsen, J.; Niinikoski, T.; Nikiforou, N.; Nikiforov, A.; Nikolaenko, V.; Nikolaev, K.; Nikolic-Audit, I.; Nikolics, K.; Nikolopoulos, K.; Nilsen, H.; Nilsson, P.; Ninomiya, Y.; Nisati, A.; Nishiyama, T.; Nisius, R.; Nodulman, L.; Nomachi, M.; Nomidis, I.; Nordberg, M.; Nordkvist, B.; Norton, P. R.; Novakova, J.; Nozaki, M.; Nožička, M.; Nozka, L.; Nugent, I. M.; Nuncio-Quiroz, A. -E.; Nunes Hanninger, G.; Nunnemann, T.; Nurse, E.; Nyman, T.; O’Brien, B. J.; O’Neale, S. W.; O’Neil, D. C.; O’Shea, V.; Oakham, F. G.; Oberlack, H.; Ocariz, J.; Ochi, A.; Oda, S.; Odaka, S.; Odier, J.; Ogren, H.; Oh, A.; Oh, S. H.; Ohm, C. C.; Ohshima, T.; Ohshita, H.; Ohska, T. K.; Ohsugi, T.; Okada, S.; Okawa, H.; Okumura, Y.; Okuyama, T.; Olcese, M.; Olchevski, A. G.; Oliveira, M.; Oliveira Damazio, D.; Oliver Garcia, E.; Olivito, D.; Olszewski, A.; Olszowska, J.; Omachi, C.; Onofre, A.; Onyisi, P. U. E.; Oram, C. J.; Oreglia, M. J.; Oren, Y.; Orestano, D.; Orlov, I.; Oropeza Barrera, C.; Orr, R. S.; Osculati, B.; Ospanov, R.; Osuna, C.; Otero y Garzon, G.; Ottersbach, J. P.; Ouchrif, M.; Ould-Saada, F.; Ouraou, A.; Ouyang, Q.; Owen, M.; Owen, S.; Ozcan, V. E.; Ozturk, N.; Pacheco Pages, A.; Padilla Aranda, C.; Pagan Griso, S.; Paganis, E.; Paige, F.; Pajchel, K.; Paleari, C. P.; Palestini, S.; Pallin, D.; Palma, A.; Palmer, J. D.; Pan, Y. B.; Panagiotopoulou, E.; Panes, B.; Panikashvili, N.; Panitkin, S.; Pantea, D.; Panuskova, M.; Paolone, V.; Papadelis, A.; Papadopoulou, Th. D.; Paramonov, A.; Park, W.; Parker, M. A.; Parodi, F.; Parsons, J. A.; Parzefall, U.; Pasqualucci, E.; Passeri, A.; Pastore, F.; Pastore, Fr.; Pásztor, G.; Pataraia, S.; Patel, N.; Pater, J. R.; Patricelli, S.; Pauly, T.; Pecsy, M.; Pedraza Morales, M. I.; Peleganchuk, S. V.; Peng, H.; Pengo, R.; Penson, A.; Penwell, J.; Perantoni, M.; Perez, K.; Perez Cavalcanti, T.; Perez Codina, E.; Pérez García-Estañ, M. T.; Perez Reale, V.; Perini, L.; Pernegger, H.; Perrino, R.; Perrodo, P.; Persembe, S.; Peshekhonov, V. D.; Peters, O.; Petersen, B. A.; Petersen, J.; Petersen, T. C.; Petit, E.; Petridis, A.; Petridou, C.; Petrolo, E.; Petrucci, F.; Petschull, D.; Petteni, M.; Pezoa, R.; Phan, A.; Phillips, A. W.; Phillips, P. W.; Piacquadio, G.; Piccaro, E.; Piccinini, M.; Pickford, A.; Piec, S. M.; Piegaia, R.; Pilcher, J. E.; Pilkington, A. D.; Pina, J.; Pinamonti, M.; Pinder, A.; Pinfold, J. L.; Ping, J.; Pinto, B.; Pirotte, O.; Pizio, C.; Placakyte, R.; Plamondon, M.; Plano, W. G.; Pleier, M. -A.; Pleskach, A. V.; Poblaguev, A.; Poddar, S.; Podlyski, F.; Poggioli, L.; Poghosyan, T.; Pohl, M.; Polci, F.; Polesello, G.; Policicchio, A.; Polini, A.; Poll, J.; Polychronakos, V.; Pomarede, D. M.; Pomeroy, D.; Pommès, K.; Pontecorvo, L.; Pope, B. G.; Popeneciu, G. A.; Popovic, D. S.; Poppleton, A.; Bueso, X. Portell; Porter, R.; Posch, C.; Pospelov, G. E.; Pospisil, S.; Potrap, I. N.; Potter, C. J.; Potter, C. T.; Poulard, G.; Poveda, J.; Prabhu, R.; Pralavorio, P.; Prasad, S.; Pravahan, R.; Prell, S.; Pretzl, K.; Pribyl, L.; Price, D.; Price, L. E.; Price, M. J.; Prichard, P. M.; Prieur, D.; Primavera, M.; Prokofiev, K.; Prokoshin, F.; Protopopescu, S.; Proudfoot, J.; Prudent, X.; Przysiezniak, H.; Psoroulas, S.; Ptacek, E.; Purdham, J.; Purohit, M.; Puzo, P.; Pylypchenko, Y.; Qian, J.; Qian, Z.; Qin, Z.; Quadt, A.; Quarrie, D. R.; Quayle, W. B.; Quinonez, F.; Raas, M.; Radescu, V.; Radics, B.; Rador, T.; Ragusa, F.; Rahal, G.; Rahimi, A. M.; Rahm, D.; Rajagopalan, S.; Rammensee, M.; Rammes, M.; Ramstedt, M.; Randle-Conde, A. S.; Randrianarivony, K.; Ratoff, P. N.; Rauscher, F.; Rauter, E.; Raymond, M.; Read, A. L.; Rebuzzi, D. M.; Redelbach, A.; Redlinger, G.; Reece, R.; Reeves, K.; Reichold, A.; Reinherz-Aronis, E.; Reinsch, A.; Reisinger, I.; Reljic, D.; Rembser, C.; Ren, Z. L.; Renaud, A.; Renkel, P.; Rescigno, M.; Resconi, S.; Resende, B.; Reznicek, P.; Rezvani, R.; Richards, A.; Richter, R.; Richter-Was, E.; Ridel, M.; Rieke, S.; Rijpstra, M.; Rijssenbeek, M.; Rimoldi, A.; Rinaldi, L.; Rios, R. R.; Riu, I.; Rivoltella, G.; Rizatdinova, F.; Rizvi, E.; Robertson, S. H.; Robichaud-Veronneau, A.; Robinson, D.; Robinson, J. E. M.; Robinson, M.; Robson, A.; Rocha de Lima, J. G.; Roda, C.; Roda Dos Santos, D.; Rodier, S.; Rodriguez, D.; Roe, A.; Roe, S.; Røhne, O.; Rojo, V.; Rolli, S.; Romaniouk, A.; Romanov, V. M.; Romeo, G.; Romero Maltrana, D.; Roos, L.; Ros, E.; Rosati, S.; Rosbach, K.; Rose, A.; Rose, M.; Rosenbaum, G. A.; Rosenberg, E. I.; Rosendahl, P. L.; Rosselet, L.; Rossetti, V.; Rossi, E.; Rossi, L. P.; Rossi, L.; Rotaru, M.; Roth, I.; Rothberg, J.; Rousseau, D.; Royon, C. R.; Rozanov, A.; Rozen, Y.; Ruan, X.; Rubinskiy, I.; Ruckert, B.; Ruckstuhl, N.; Rud, V. I.; Rudolph, C.; Rudolph, G.; Rühr, F.; Ruggieri, F.; Ruiz-Martinez, A.; Rulikowska-Zarebska, E.; Rumiantsev, V.; Rumyantsev, L.; Runge, K.; Runolfsson, O.; Rurikova, Z.; Rusakovich, N. A.; Rust, D. R.; Rutherfoord, J. P.; Ruwiedel, C.; Ruzicka, P.; Ryabov, Y. F.; Ryadovikov, V.; Ryan, P.; Rybar, M.; Rybkin, G.; Ryder, N. C.; Rzaeva, S.; Saavedra, A. F.; Sadeh, I.; Sadrozinski, H. F-W.; Sadykov, R.; Tehrani, F. Safai; Sakamoto, H.; Salamanna, G.; Salamon, A.; Saleem, M.; Salihagic, D.; Salnikov, A.; Salt, J.; Salvachua Ferrando, B. M.; Salvatore, D.; Salvatore, F.; Salvucci, A.; Salzburger, A.; Sampsonidis, D.; Samset, B. H.; Sanchez, A.; Sandaker, H.; Sander, H. G.; Sanders, M. P.; Sandhoff, M.; Sandoval, T.; Sandoval, C.; Sandstroem, R.; Sandvoss, S.; Sankey, D. P. C.; Sansoni, A.; Santamarina Rios, C.; Santoni, C.; Santonico, R.; Santos, H.; Saraiva, J. G.; Sarangi, T.; Sarkisyan-Grinbaum, E.; Sarri, F.; Sartisohn, G.; Sasaki, O.; Sasaki, T.; Sasao, N.; Satsounkevitch, I.; Sauvage, G.; Sauvan, E.; Sauvan, J. B.; Savard, P.; Savinov, V.; Savu, D. O.; Savva, P.; Sawyer, L.; Saxon, D. H.; Says, L. P.; Sbarra, C.; Sbrizzi, A.; Scallon, O.; Scannicchio, D. A.; Schaarschmidt, J.; Schacht, P.; Schäfer, U.; Schaepe, S.; Schaetzel, S.; Schaffer, A. C.; Schaile, D.; Schamberger, R. D.; Schamov, A. G.; Scharf, V.; Schegelsky, V. A.; Scheirich, D.; Schernau, M.; Scherzer, M. I.; Schiavi, C.; Schieck, J.; Schioppa, M.; Schlenker, S.; Schlereth, J. L.; Schmidt, E.; Schmieden, K.; Schmitt, C.; Schmitt, S.; Schmitz, M.; Schöning, A.; Schott, M.; Schouten, D.; Schovancova, J.; Schram, M.; Schroeder, C.; Schroer, N.; Schuh, S.; Schuler, G.; Schultes, J.; Schultz-Coulon, H. -C.; Schulz, H.; Schumacher, J. W.; Schumacher, M.; Schumm, B. A.; Schune, Ph.; Schwanenberger, C.; Schwartzman, A.; Schwemling, Ph.; Schwienhorst, R.; Schwierz, R.; Schwindling, J.; Schwindt, T.; Scott, W. G.; Searcy, J.; Sedykh, E.; Segura, E.; Seidel, S. C.; Seiden, A.; Seifert, F.; Seixas, J. M.; Sekhniaidze, G.; Seliverstov, D. M.; Sellden, B.; Sellers, G.; Seman, M.; Semprini-Cesari, N.; Serfon, C.; Serin, L.; Seuster, R.; Severini, H.; Sevior, M. E.; Sfyrla, A.; Shabalina, E.; Shamim, M.; Shan, L. Y.; Shank, J. T.; Shao, Q. T.; Shapiro, M.; Shatalov, P. B.; Shaver, L.; Shaw, C.; Shaw, K.; Sherman, D.; Sherwood, P.; Shibata, A.; Shichi, H.; Shimizu, S.; Shimojima, M.; Shin, T.; Shmeleva, A.; Shochet, M. J.; Short, D.; Shupe, M. A.; Sicho, P.; Sidoti, A.; Siebel, A.; Siegert, F.; Siegrist, J.; Sijacki, Dj.; Silbert, O.; Silva, J.; Silver, Y.; Silverstein, D.; Silverstein, S. B.; Simak, V.; Simard, O.; Simic, Lj.; Simion, S.; Simmons, B.; Simonyan, M.; Sinervo, P.; Sinev, N. B.; Sipica, V.; Siragusa, G.; Sircar, A.; Sisakyan, A. N.; Sivoklokov, S. Yu.; Sjölin, J.; Sjursen, T. B.; Skinnari, L. A.; Skovpen, K.; Skubic, P.; Skvorodnev, N.; Slater, M.; Slavicek, T.; Sliwa, K.; Sloan, T. J.; Sloper, J.; Smakhtin, V.; Smirnov, S. Yu.; Smirnova, L. N.; Smirnova, O.; Smith, B. C.; Smith, D.; Smith, K. M.; Smizanska, M.; Smolek, K.; Snesarev, A. A.; Snow, S. W.; Snow, J.; Snuverink, J.; Snyder, S.; Soares, M.; Sobie, R.; Sodomka, J.; Soffer, A.; Solans, C. A.; Solar, M.; Solc, J.; Soldatov, E.; Soldevila, U.; Solfaroli Camillocci, E.; Solodkov, A. A.; Solovyanov, O. V.; Sondericker, J.; Soni, N.; Sopko, V.; Sopko, B.; Sorbi, M.; Sosebee, M.; Soukharev, A.; Spagnolo, S.; Spanò, F.; Spighi, R.; Spigo, G.; Spila, F.; Spiriti, E.; Spiwoks, R.; Spousta, M.; Spreitzer, T.; Spurlock, B.; St. Denis, R. D.; Stahl, T.; Stahlman, J.; Stamen, R.; Stanecka, E.; Stanek, R. W.; Stanescu, C.; Stapnes, S.; Starchenko, E. A.; Stark, J.; Staroba, P.; Starovoitov, P.; Staude, A.; Stavina, P.; Stavropoulos, G.; Steele, G.; Steinbach, P.; Steinberg, P.; Stekl, I.; Stelzer, B.; Stelzer, H. J.; Stelzer-Chilton, O.; Stenzel, H.; Stevenson, K.; Stewart, G. A.; Stillings, J. A.; Stockmanns, T.; Stockton, M. C.; Stoerig, K.; Stoicea, G.; Stonjek, S.; Strachota, P.; Stradling, A. R.; Straessner, A.; Strandberg, J.; Strandberg, S.; Strandlie, A.; Strang, M.; Strauss, E.; Strauss, M.; Strizenec, P.; Ströhmer, R.; Strom, D. M.; Strong, J. A.; Stroynowski, R.; Strube, J.; Stugu, B.; Stumer, I.; Stupak, J.; Sturm, P.; Soh, D. A.; Su, D.; Subramania, HS.; Succurro, A.; Sugaya, Y.; Sugimoto, T.; Suhr, C.; Suita, K.; Suk, M.; Sulin, V. V.; Sultansoy, S.; Sumida, T.; Sun, X.; Sundermann, J. E.; Suruliz, K.; Sushkov, S.; Susinno, G.; Sutton, M. R.; Suzuki, Y.; Svatos, M.; Sviridov, Yu. M.; Swedish, S.; Sykora, I.; Sykora, T.; Szeless, B.; Sánchez, J.; Ta, D.; Tackmann, K.; Taffard, A.; Tafirout, R.; Taga, A.; Taiblum, N.; Takahashi, Y.; Takai, H.; Takashima, R.; Takeda, H.; Takeshita, T.; Talby, M.; Talyshev, A.; Tamsett, M. C.; Tanaka, J.; Tanaka, R.; Tanaka, S.; Tanaka, S.; Tanaka, Y.; Tani, K.; Tannoury, N.; Tappern, G. P.; Tapprogge, S.; Tardif, D.; Tarem, S.; Tarrade, F.; Tartarelli, G. F.; Tas, P.; Tasevsky, M.; Tassi, E.; Tatarkhanov, M.; Taylor, C.; Taylor, F. E.; Taylor, G. N.; Taylor, W.; Teixeira Dias Castanheira, M.; Teixeira-Dias, P.; Temming, K. K.; Ten Kate, H.; Teng, P. K.; Terada, S.; Terashi, K.; Terron, J.; Terwort, M.; Testa, M.; Teuscher, R. J.; Thadome, J.; Therhaag, J.; Theveneaux-Pelzer, T.; Thioye, M.; Thoma, S.; Thomas, J. P.; Thompson, E. N.; Thompson, P. D.; Thompson, P. D.; Thompson, A. S.; Thomson, E.; Thomson, M.; Thun, R. P.; Tian, F.; Tic, T.; Tikhomirov, V. O.; Tikhonov, Y. A.; Timmermans, C. J. W. P.; Tipton, P.; Tique Aires Viegas, F. J.; Tisserant, S.; Tobias, J.; Toczek, B.; Todorov, T.; Todorova-Nova, S.; Toggerson, B.; Tojo, J.; Tokár, S.; Tokunaga, K.; Tokushuku, K.; Tollefson, K.; Tomoto, M.; Tompkins, L.; Toms, K.; Tong, G.; Tonoyan, A.; Topfel, C.; Topilin, N. D.; Torchiani, I.; Torrence, E.; Torres, H.; Torró Pastor, E.; Toth, J.; Touchard, F.; Tovey, D. R.; Traynor, D.; Trefzger, T.; Tremblet, L.; Tricoli, A.; Trigger, I. M.; Trincaz-Duvoid, S.; Trinh, T. N.; Tripiana, M. F.; Trischuk, W.; Trivedi, A.; Trocmé, B.; Troncon, C.; Trottier-McDonald, M.; Trzupek, A.; Tsarouchas, C.; Tseng, J. C-L.; Tsiakiris, M.; Tsiareshka, P. V.; Tsionou, D.; Tsipolitis, G.; Tsiskaridze, V.; Tskhadadze, E. G.; Tsukerman, I. I.; Tsulaia, V.; Tsung, J. -W.; Tsuno, S.; Tsybychev, D.; Tua, A.; Tuggle, J. M.; Turala, M.; Turecek, D.; Turk Cakir, I.; Turlay, E.; Turra, R.; Tuts, P. M.; Tykhonov, A.; Tylmad, M.; Tyndel, M.; Tyrvainen, H.; Tzanakos, G.; Uchida, K.; Ueda, I.; Ueno, R.; Ugland, M.; Uhlenbrock, M.; Uhrmacher, M.; Ukegawa, F.; Unal, G.; Underwood, D. G.; Undrus, A.; Unel, G.; Unno, Y.; Urbaniec, D.; Urkovsky, E.; Urrejola, P.; Usai, G.; Uslenghi, M.; Vacavant, L.; Vacek, V.; Vachon, B.; Vahsen, S.; Valenta, J.; Valente, P.; Valentinetti, S.; Valkar, S.; Valladolid Gallego, E.; Vallecorsa, S.; Valls Ferrer, J. A.; van der Graaf, H.; van der Kraaij, E.; Van Der Leeuw, R.; van der Poel, E.; van der Ster, D.; Van Eijk, B.; van Eldik, N.; van Gemmeren, P.; van Kesteren, Z.; van Vulpen, I.; Vandelli, W.; Vandoni, G.; Vaniachine, A.; Vankov, P.; Vannucci, F.; Varela Rodriguez, F.; Vari, R.; Varnes, E. W.; Varouchas, D.; Vartapetian, A.; Varvell, K. E.; Vassilakopoulos, V. I.; Vazeille, F.; Vegni, G.; Veillet, J. J.; Vellidis, C.; Veloso, F.; Veness, R.; Veneziano, S.; Ventura, A.; Ventura, D.; Venturi, M.; Venturi, N.; Vercesi, V.; Verducci, M.; Verkerke, W.; Vermeulen, J. C.; Vest, A.; Vetterli, M. C.; Vichou, I.; Vickey, T.; Viehhauser, G. H. A.; Viel, S.; Villa, M.; Villaplana Perez, M.; Vilucchi, E.; Vincter, M. G.; Vinek, E.; Vinogradov, V. B.; Virchaux, M.; Virzi, J.; Vitells, O.; Viti, M.; Vivarelli, I.; Vives Vaque, F.; Vlachos, S.; Vlasak, M.; Vlasov, N.; Vogel, A.; Vokac, P.; Volpi, G.; Volpi, M.; Volpini, G.; von der Schmitt, H.; von Loeben, J.; von Radziewski, H.; von Toerne, E.; Vorobel, V.; Vorobiev, A. P.; Vorwerk, V.; Vos, M.; Voss, R.; Voss, T. T.; Vossebeld, J. H.; Vranjes, N.; Vranjes Milosavljevic, M.; Vrba, V.; Vreeswijk, M.; Vu Anh, T.; Vuillermet, R.; Vukotic, I.; Wagner, W.; Wagner, P.; Wahlen, H.; Wakabayashi, J.; Walbersloh, J.; Walch, S.; Walder, J.; Walker, R.; Walkowiak, W.; Wall, R.; Waller, P.; Wang, C.; Wang, H.; Wang, H.; Wang, J.; Wang, J.; Wang, J. C.; Wang, R.; Wang, S. M.; Warburton, A.; Ward, C. P.; Warsinsky, M.; Watkins, P. M.; Watson, A. T.; Watson, M. F.; Watts, G.; Watts, S.; Waugh, A. T.; Waugh, B. M.; Weber, J.; Weber, M.; Weber, M. S.; Weber, P.; Weidberg, A. R.; Weigell, P.; Weingarten, J.; Weiser, C.; Wellenstein, H.; Wells, P. S.; Wen, M.; Wenaus, T.; Wendler, S.; Weng, Z.; Wengler, T.; Wenig, S.; Wermes, N.; Werner, M.; Werner, P.; Werth, M.; Wessels, M.; Weydert, C.; Whalen, K.; Wheeler-Ellis, S. J.; Whitaker, S. P.; White, A.; White, M. J.; White, S.; Whitehead, S. R.; Whiteson, D.; Whittington, D.; Wicek, F.; Wicke, D.; Wickens, F. J.; Wiedenmann, W.; Wielers, M.; Wienemann, P.; Wiglesworth, C.; Wiik, L. A. M.; Wijeratne, P. A.; Wildauer, A.; Wildt, M. A.; Wilhelm, I.; Wilkens, H. G.; Will, J. Z.; Williams, E.; Williams, H. H.; Willis, W.; Willocq, S.; Wilson, J. A.; Wilson, M. G.; Wilson, A.; Wingerter-Seez, I.; Winkelmann, S.; Winklmeier, F.; Wittgen, M.; Wolter, M. W.; Wolters, H.; Wong, W. C.; Wooden, G.; Wosiek, B. K.; Wotschack, J.; Woudstra, M. J.; Wraight, K.; Wright, C.; Wrona, B.; Wu, S. L.; Wu, X.; Wu, Y.; Wulf, E.; Wunstorf, R.; Wynne, B. M.; Xaplanteris, L.; Xella, S.; Xie, S.; Xie, Y.; Xu, C.; Xu, D.; Xu, G.; Yabsley, B.; Yacoob, S.; Yamada, M.; Yamaguchi, H.; Yamamoto, A.; Yamamoto, K.; Yamamoto, S.; Yamamura, T.; Yamanaka, T.; Yamaoka, J.; Yamazaki, T.; Yamazaki, Y.; Yan, Z.; Yang, H.; Yang, U. K.; Yang, Y.; Yang, Y.; Yang, Z.; Yanush, S.; Yao, W-M.; Yao, Y.; Yasu, Y.; Ybeles Smit, G. V.; Ye, J.; Ye, S.; Yilmaz, M.; Yoosoofmiya, R.; Yorita, K.; Yoshida, R.; Young, C.; Youssef, S.; Yu, D.; Yu, J.; Yu, J.; Yuan, L.; Yurkewicz, A.; Zaets, V. G.; Zaidan, R.; Zaitsev, A. M.; Zajacova, Z.; Zalite, Yo. K.; Zanello, L.; Zarzhitsky, P.; Zaytsev, A.; Zeitnitz, C.; Zeller, M.; Zemla, A.; Zendler, C.; Zenin, O.; Ženiš, T.; Zenonos, Z.; Zenz, S.; Zerwas, D.; Zevi della Porta, G.; Zhan, Z.; Zhang, D.; Zhang, H.; Zhang, J.; Zhang, X.; Zhang, Z.; Zhao, L.; Zhao, T.; Zhao, Z.; Zhemchugov, A.; Zheng, S.; Zhong, J.; Zhou, B.; Zhou, N.; Zhou, Y.; Zhu, C. G.; Zhu, H.; Zhu, J.; Zhu, Y.; Zhuang, X.; Zhuravlov, V.; Zieminska, D.; Zimmermann, R.; Zimmermann, S.; Zimmermann, S.; Ziolkowski, M.; Zitoun, R.; Živković, L.; Zmouchko, V. V.; Zobernig, G.; Zoccoli, A.; Zolnierowski, Y.; Zsenei, A.; zur Nedden, M.; Zutshi, V.; Zwalinski, L.

2011-09-01

A measurement of jet activity in the rapidity interval bounded by a dijet system is presented. Events are vetoed if a jet with transverse momentum greater than 20 GeV is found between the two boundary jets. The fraction of dijet events that survive the jet veto is presented for boundary jets that are separated by up to six units of rapidity and with mean transverse momentum 50 < p¯T < 500 GeV. The mean multiplicity of jets above the veto scale in the rapidity interval bounded by the dijet system is also presented as an alternative method for quantifying perturbative QCD emission. The data are compared to a next-to-leading order plus parton shower prediction from the powheg-box, an all-order resummation using the hej calculation and the pythia, herwig++ and alpgen event generators. The measurement was performed using pp collisions at √s=7 TeV using data recorded by the ATLAS detector in 2010.

[Olaf Asendorf. Das Veto des Deutschen Ordens gegen die Erhöhung des Nikolaikirchturmes in Reval] / Paul Kaegbein

Index Scriptorium Estoniae

Kaegbein, Paul

2006-01-01

Arvustus: Olaf Asendorf. Das Veto des Deutschen Ordens gegen die Erhöhung des Nikolaikirchturmes in Reval. In: Asendorf: Mittelalterliche Türme im deutschordensland Preussen. Frankfurt am Main, Berlin, Bern, New York, Paris, Wien: Lang 1998. S. 105-109. Niguliste kiriku torni ehitusloost

Bugetul funcțional (Line - Item Budget și metoda Buget Bază Zero ( Zero Base Budgeting - ZBB

Directory of Open Access Journals (Sweden)

Dan Tudor LAZĂR

2004-06-01

Full Text Available A line-item budget lists, in vertical columns, each of the revenue sources and each of the types – or classes – of items will purchase during the fiscal year. The line-item budget, which is the most widely used of all budgeting systems, offers many advantages. It is comparatively easy to prepare and doesn’t require sophisticated financial skills. Also, the line-item budget is straightforward, simple to administer and readily understood by everybody. Moreover, the simplicity of the system makes it easier to monitor revenues and expenditures, which is important in this era of shrinking resources. Zero-based budgeting is a system that requires all departments to defend their programs and justify their continuation each year. Instead of simply penciling in the amounts of the additional funds that are needed in each account, the department head must prepare a series of “decision packages” that describe – and justify – each of the department’s programs in detail. For each program, the department must show: the various levels of service that could be provided with different levels of funding – including zero funding; alternative courses of action; and the consequences of funding the service at different levels, or not funding it at all. The most positive feature of zero-based budgeting is that it requires a thorough evaluation of all programs on a continuing basis and encourages proper funding for priority programs at the expense of less useful programs. The major drawback to zero-based budgeting is that it is extremely time-consuming, costly and requires a level of staff expertise that is not often available in small cities.

Upgrade of the muon veto and current status of the Dortmund low background HPGe facility

Energy Technology Data Exchange (ETDEWEB)

Goessling, Claus; Kroeninger, Kevin; Neddermann, Till; Nitsch, Christian; Quante, Thomas [TU Dortmund, Physik EIV, D-44221 Dortmund (Germany)

2015-07-01

The Dortmund Low Background HPGe Facility (DLB) is a germanium facility with heavy shielding located above ground. It's primary task is to provide material screening support for the COBRA experiment which was built to search for neutrinoless double beta decay. Germanium detectors used for low background gamma spectroscopy are usually operated under either a fairly low overburden (O(1m) water equivalent (mwe)) or high overburden, e.g. in specialised underground laboratories (O(>100 mwe)). In between, only a few facilities exist, such as the DLB. The artificial overburden of 10 mwe already shields the weak component of cosmic rays. The lead castle with a state-of-the-art neutron shielding as well as the active anti-cosmics veto detector enable low background gamma spectrometry with the advantage of good accessibility on the university campus. Throughout the last years improvements have been made especially on the cosmics veto and the MC simulation leading to an remarkable low integral background counting rate (40-2700 keV) of about 2.5228(52) counts/kg/min. The talk summarises the completed tasks and presents the current status.

Waste management of Line Item projects at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Zill, D.S.

1993-01-01

With the growing number of companies involved with today's Line Item projects at the Oak Ridge National Laboratory (ORNL), there are ever increasing problems in the handling of Radioactive Solid Low-Level Waste (SLLW). The most important of these problems is who is going to do what with the waste and when are they going to do it. The who brings to mind training; the what, compliance; and the when, cost. At ORNL, the authors have found that the best way to address the challenges of waste handling where several contractors are involved is through communication, compromise and consistency. Without these elements, opportunities bred from waste handling are likely to bring the project to a halt

Simulation results of a veto counter for the ClearPEM

CERN Document Server

Trummer, J; Lecoq, P

2009-01-01

The Crystal Clear Collaboration (CCC) has built a prototype of a novel positron emission tomograph dedicated to functional breast imaging, the ClearPEM. The ClearPEM uses the common radio pharmaceutical FDG for imaging cancer. As FDG is a rather non-specific radio tracer, it accumulates not only in cancer cells but in all cells with a high energy consumption, such as the heart and liver. This fact poses a problem especially in breast imaging, where the vicinity of the heart and other organs to the breast leads to a high background noise level in the scanner. In this work, a veto counter to reduce the background is described. Different configurations and their effectiveness were studied using the GATE simulation package.

Complaint of unconstitutionality rejected in the matter of the Muelheim-Kaerlich nuclear power station

International Nuclear Information System (INIS)

Anon.

1980-01-01

The First Department of the Federal Constitutional Court, in a decision of December 20, 1979, rejected the complaint of unconstitutionality brought against the decision of May 3, 1977 of the Rhineland-Palatinate Higher Administrative Court. The decision under attack had rescinded the halt of construction work on the Muelheim-Kaerlich Nuclear Power Station. The court argues, inter alia, that a violation of a basic civil right could also be involved, if the licensing authority neglected to take into account procedural rules under the Atomic Energy Act which had been passed by the Government in discharging its obligations to offer protection under Article 2, Para. 2 of the Basic Law. The present and direct involvement of the holder of a civil right could not be denied for the reason that hazards to life and health could arise only from the operation of a nuclear power plant, but not yet from measures preceding it. (HSCH) [de

Installation of a muon veto for low background gamma spectroscopy at the LBNL low-background facility

Energy Technology Data Exchange (ETDEWEB)

Thomas, K.J., E-mail: kjthomas@lbl.gov [Department of Nuclear Engineering, University of California, Berkeley, CA 94720 (United States); Nuclear Science Division, Lawrence Berkeley Laboratory, CA 94720 (United States); Norman, E.B. [Department of Nuclear Engineering, University of California, Berkeley, CA 94720 (United States); Nuclear Science Division, Lawrence Berkeley Laboratory, CA 94720 (United States); Smith, A.R.; Chan, Y.D. [Nuclear Science Division, Lawrence Berkeley Laboratory, CA 94720 (United States)

2013-10-01

An active veto system consisting of plastic scintillation panels was installed outside the Pb shielding of a 115% n-type HPGe detector in an effort to reduce background continuum generated by cosmic ray muons on the surface. The Low Background Facility at the Lawrence Berkeley National Laboratory performs low level assay (generally of primordial U, Th, K) of candidate construction materials for experiments that require a high level of radiopurity. The counting is performed in two facilities: one local surface site and a remote underground site of approximately 600 m.w.e. For the recently installed veto system at the surface location, the top scintillator panel has been in use for nearly 1 year and the full 3π anticoincidence shield was commissioned into normal counting operations in January 2013. The integrated background from 20 to 3600 keV is reduced overall by a factor of 8, where most of the energy spectrum above 100 keV achieves an overall reduction that varies from 8 to 10. A dramatic improvement of peak-to-background across the entire continuum is observed, greatly enhancing low-level peaks that would otherwise be obscured.

Further development of a cosmic veto gamma-spectrometer

International Nuclear Information System (INIS)

Burnett, J.L.; Davies, A.V.; McLarty, J.L.

2013-01-01

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a network of certified laboratories that perform high-resolution gamma-spectrometry on global air filter samples for the identification of 85 radionuclides. At the UK CTBT Radionuclide Laboratory (GBL15), a novel cosmic veto gamma-spectrometer has been developed to improve the sensitivity of measurements for treaty compliance. The system consists of plastic scintillation plates operated in time-stamp mode to detect coincident cosmic-ray interactions within an HPGe gamma-spectrometer. This provides a mean background reduction of 75.2 % with MDA improvements of 45.6 %. The CTBT requirement for a 140 Ba MDA is achievable after 1.5 days counting compared to 5-7 days using conventional systems. The system does not require dedicated coincidence electronics, and remains easily configurable with dual acquisition of unsuppressed and suppressed spectra. Performance has been significantly improved by complete processing of the cosmic-ray spectrum (0-25 MeV) combined with the Canberra Lynx TM multi-channel analyser. The improved sensitivity has been demonstrated for a CTBT air filter sample collected after the Fukushima incident. (author)

Muon flux measurements at the davis campus of the sanford underground research facility with the MAJORANA DEMONSTRATOR veto system

Science.gov (United States)

Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Bradley, A. W.; Brudanin, V.; Busch, M.; Buuck, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Chu, P.-H.; Cuesta, C.; Detwiler, J. A.; Dunagan, C.; Efremenko, Yu.; Ejiri, H.; Elliott, S. R.; Galindo-Uribarri, A.; Gilliss, T.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guinn, I. S.; Guiseppe, V. E.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Jasinski, B. R.; Keeter, K. J.; Kidd, M. F.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J.; Lopez, A. M.; MacMullin, J.; Martin, R. D.; Massarczyk, R.; Meijer, S. J.; Mertens, S.; Orrell, J. L.; O'Shaughnessy, C.; Overman, N. R.; Poon, A. W. P.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Schmitt, C.; Shanks, B.; Shirchenko, M.; Snyder, N.; Suriano, A. M.; Tedeschi, D.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

2017-07-01

We report the first measurement of the total muon flux underground at the Davis Campus of the Sanford Underground Research Facility at the 4850 ft level. Measurements were performed using the MAJORANADEMONSTRATOR muon veto system arranged in two different configurations. The measured total flux is (5.31 ± 0.17) ×10-9 μ /s/cm2. Demonstrate a path forward to achieving a background rate at or below 1 count/(ROI-t-y)in the 4-keV region of interest (ROI) around the 2039-keV Q-value for 76Ge ββ(0ν) decay. This is required for tonne-scale germanium-based searches that will probe the inverted-ordering neutrino-mass parameter space for the effective Majorana neutrino mass in ββ(0ν) decay. Show technical and engineering scalability toward a tonne-scale instrument. Perform searches for additional physics beyond the Standard Model, such as dark matter and axions. The MAJORANA Collaboration has designed a modular instrument composed of two cryostats built from ultra-pure electroformed copper, with each cryostat capable of housing over 20 kg of HPGe detectors. The MAJORANADEMONSTRATOR contains 30 kg of detectors fabricated from Ge material enriched to 88% in 76Ge and another 15 kg fabricated from natural Ge (7.8% 76Ge). The modular approach allows us to assemble and optimize each cryostat independently, providing a fast deployment with minimal effect on already-operational detectors.Starting from the innermost cavity, the cryostats are surrounded by a compact graded shield composed of an inner layer of electroformed copper, a layer of commercially sourced C10100 copper, high-purity lead, an active muon veto, borated polyethylene, and pure polyethylene shielding. The cryostats, copper, and lead shielding are enclosed in a radon exclusion box and rest on an over-floor table that has openings for the active muon veto and polyethylene shielding panels situated below the detector. The entire experiment is located in a clean room at the 4850 ft level of SURF. A high

La Defensa Coletiva del Dereceho del Consumidor y el Veto a el Incidente de Colectivización en el Nuevo Código Proceso Civil

Directory of Open Access Journals (Sweden)

Roberto de Oliveira Almeida

2016-10-01

Full Text Available La masificación de la producción y el consumo lo que condujo al aumento de las demandas. Dado el sistema de procedimiento altamente individualista, demandas de consumido con su tónica y rebote difusa alimentaran la necesidad de avanzar en la protección de los derechos fundamentales que tienen los consumidores. La entrada en vigor del nuevo Código Proceso Civil y el veto presidencial a el incidente de colectivización plantea el problema de la saturación del poder judicial frente a demandas consumeristas que si majorán y repiten. En este contexto, la investigación propone discutir los fundamentos de veto para el incidente.

Considerations regarding the unconstitutionality of articles 55¹ and 99¹ of the law on local public administration

Directory of Open Access Journals (Sweden)

Mihai Cristian Apostolache

2017-06-01

Full Text Available Since its entry into force and to date, Law no. 215/2001 on local public administration has undergone many amendments and completions. One of the questionable additions to this act is done by GEO (OUG no. 41/2015, a regulation which brought two new articles to the body of the framework-law on local public administration, i.e. Article 55¹ and Article 99¹. These two articles regulate a unique way of establishing the local or county council, namely by reconstituting these autonomous collegial bodies. This article examines the legislative intervention made by GEO no. 41/2015 and highlights the unconstitutionality aspects of this legislative intervention, recommending the legislature to urgently repeal the regulations governing the reconstitution of the local and county councils.

Measurement of $t\\overline{t}$ production with a veto on additional central jet activity in pp collisions at $\\sqrt{s}$ = 7 TeV using the ATLAS detector

CERN Document Server

Aad, Georges; Abdallah, Jalal; Abdel Khalek, Samah; Abdelalim, Ahmed Ali; Abdesselam, Abdelouahab; Abdinov, Ovsat; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Acerbi, Emilio; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Addy, Tetteh; Adelman, Jahred; Aderholz, Michael; Adomeit, Stefanie; Adragna, Paolo; Adye, Tim; Aefsky, Scott; Aguilar-Saavedra, Juan Antonio; Aharrouche, Mohamed; Ahlen, Steven; Ahles, Florian; Ahmad, Ashfaq; Ahsan, Mahsana; Aielli, Giulio; Akdogan, Taylan; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Akiyama, Kunihiro; Alam, Mohammad; Alam, Muhammad Aftab; Albert, Justin; Albrand, Solveig; Aleksa, Martin; Aleksandrov, Igor; Alessandria, Franco; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Aliev, Malik; Alimonti, Gianluca; Alison, John; Aliyev, Magsud; Allbrooke, Benedict; Allport, Phillip; Allwood-Spiers, Sarah; Almond, John; Aloisio, Alberto; Alon, Raz; Alonso, Alejandro; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amaral, Pedro; Amelung, Christoph; Ammosov, Vladimir; Amorim, Antonio; Amorós, Gabriel; Amram, Nir; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Andrieux, Marie-Laure; Anduaga, Xabier; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoun, Sahar; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Arce, Ayana; Arfaoui, Samir; Arguin, Jean-Francois; Arik, Engin; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Arnault, Christian; Artamonov, Andrei; Artoni, Giacomo; Arutinov, David; Asai, Shoji; Asfandiyarov, Ruslan; Ask, Stefan; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astbury, Alan; Aubert, Bernard; Auge, Etienne; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Avramidou, Rachel Maria; Axen, David; Ay, Cano; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baccaglioni, Giuseppe; Bacci, Cesare; Bach, Andre; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Badescu, Elisabeta; Bagnaia, Paolo; Bahinipati, Seema; Bai, Yu; Bailey, David; Bain, Travis; Baines, John; Baker, Oliver Keith; Baker, Mark; Baker, Sarah; Banas, Elzbieta; Banerjee, Piyali; Banerjee, Swagato; Banfi, Danilo; Bangert, Andrea Michelle; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barashkou, Andrei; Barbaro Galtieri, Angela; Barber, Tom; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Bardin, Dmitri; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Barrillon, Pierre; Bartoldus, Rainer; Barton, Adam Edward; Bartsch, Valeria; Bates, Richard; Batkova, Lucia; Batley, Richard; Battaglia, Andreas; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beale, Steven; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Sebastian; Beckingham, Matthew; Becks, Karl-Heinz; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Begel, Michael; Behar Harpaz, Silvia; Behera, Prafulla; Beimforde, Michael; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellina, Francesco; Bellomo, Massimiliano; Belloni, Alberto; Beloborodova, Olga; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendel, Markus; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Berglund, Elina; Beringer, Jürg; Bernat, Pauline; Bernhard, Ralf; Bernius, Catrin; Berry, Tracey; Bertella, Claudia; Bertin, Antonio; Bertinelli, Francesco; Bertolucci, Federico; Besana, Maria Ilaria; Besson, Nathalie; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biscarat, Catherine; Bitenc, Urban; Black, Kevin; Blair, Robert; Blanchard, Jean-Baptiste; Blanchot, Georges; Blazek, Tomas; Blocker, Craig; Blocki, Jacek; Blondel, Alain; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Boddy, Christopher Richard; Boehler, Michael; Boek, Jennifer; Boelaert, Nele; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Bohm, Jan; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Bolnet, Nayanka Myriam; Bomben, Marco; Bona, Marcella; Bondarenko, Valery; Bondioli, Mario; Boonekamp, Maarten; Booth, Chris; Bordoni, Stefania; Borer, Claudia; Borisov, Anatoly; Borissov, Guennadi; Borjanovic, Iris; Borri, Marcello; Borroni, Sara; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Botterill, David; Bouchami, Jihene; Boudreau, Joseph; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Bousson, Nicolas; Boveia, Antonio; Boyd, James; Boyko, Igor; Bozhko, Nikolay; Bozovic-Jelisavcic, Ivanka; Bracinik, Juraj; Braem, André; Branchini, Paolo; Brandenburg, George; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brelier, Bertrand; Bremer, Johan; Brendlinger, Kurt; Brenner, Richard; Bressler, Shikma; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Brodbeck, Timothy; Brodet, Eyal; Broggi, Francesco; Bromberg, Carl; Bronner, Johanna; Brooijmans, Gustaaf; Brooks, William; Brown, Gareth; Brown, Heather; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Buanes, Trygve; Buat, Quentin; Bucci, Francesca; Buchanan, James; Buchanan, Norman; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Budick, Burton; Büscher, Volker; Bugge, Lars; Bulekov, Oleg; Bundock, Aaron Colin; Bunse, Moritz; Buran, Torleiv; Burckhart, Helfried; Burdin, Sergey; Burgess, Thomas; Burke, Stephen; Busato, Emmanuel; Bussey, Peter; Buszello, Claus-Peter; Butin, François; Butler, Bart; Butler, John; Buttar, Craig; Butterworth, Jonathan; Buttinger, William; Cabrera Urbán, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Caloi, Rita; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarri, Paolo; Cambiaghi, Mario; Cameron, David; Caminada, Lea Michaela; Campana, Simone; Campanelli, Mario; Canale, Vincenzo; Canelli, Florencia; Canepa, Anadi; Cantero, Josu; Capasso, Luciano; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capriotti, Daniele; Capua, Marcella; Caputo, Regina; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Bryan; Caron, Sascha; Carquin, Edson; Carrillo Montoya, German D; Carter, Antony; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Cascella, Michele; Caso, Carlo; Castaneda Hernandez, Alfredo Martin; Castaneda-Miranda, Elizabeth; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Cataldi, Gabriella; Catastini, Pierluigi; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caughron, Seth; Cauz, Diego; Cavalleri, Pietro; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cetin, Serkant Ali; Cevenini, Francesco; Chafaq, Aziz; Chakraborty, Dhiman; Chalupkova, Ina; Chan, Kevin; Chapleau, Bertrand; Chapman, John Derek; Chapman, John Wehrley; Chareyre, Eve; Charlton, Dave; Chavda, Vikash; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Shenjian; Chen, Tingyang; Chen, Xin; Cheng, Shaochen; Cheplakov, Alexander; Chepurnov, Vladimir; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Cheung, Sing-Leung; Chevalier, Laurent; Chiefari, Giovanni; Chikovani, Leila; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chisholm, Andrew; Chislett, Rebecca Thalatta; Chizhov, Mihail; Choudalakis, Georgios; Chouridou, Sofia; Christidi, Illectra-Athanasia; Christov, Asen; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Ciapetti, Guido; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciocca, Claudia; Ciocio, Alessandra; Cirilli, Manuela; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Philip James; Cleland, Bill; Clemens, Jean-Claude; Clement, Benoit; Clement, Christophe; Clifft, Roger; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coe, Paul; Cogan, Joshua Godfrey; Coggeshall, James; Cogneras, Eric; Colas, Jacques; Colijn, Auke-Pieter; Collins, Neil; Collins-Tooth, Christopher; Collot, Johann; Colon, German; Conde Muiño, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Consonni, Michele; Consonni, Sofia Maria; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conti, Geraldine; Conventi, Francesco; Cook, James; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Costin, Tudor; Côté, David; Courneyea, Lorraine; Cowan, Glen; Cowden, Christopher; Cox, Brian; Cranmer, Kyle; Crescioli, Francesco; Cristinziani, Markus; Crosetti, Giovanni; Crupi, Roberto; Crépé-Renaudin, Sabine; Cuciuc, Constantin-Mihai; Cuenca Almenar, Cristóbal; Cuhadar Donszelmann, Tulay; Curatolo, Maria; Curtis, Chris; Cuthbert, Cameron; Cwetanski, Peter; Czirr, Hendrik; Czodrowski, Patrick; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; D'Orazio, Alessia; Da Silva, Paulo Vitor; Da Via, Cinzia; Dabrowski, Wladyslaw; Dafinca, Alexandru; Dai, Tiesheng; Dallapiccola, Carlo; Dam, Mogens; Dameri, Mauro; Damiani, Daniel; Danielsson, Hans Olof; Dannheim, Dominik; Dao, Valerio; Darbo, Giovanni; Darlea, Georgiana Lavinia; Davey, Will; Davidek, Tomas; Davidson, Nadia; Davidson, Ruth; Davies, Eleanor; Davies, Merlin; Davison, Adam; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Dawson, John; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Castro, Stefano; De Castro Faria Salgado, Pedro; De Cecco, Sandro; de Graat, Julien; De Groot, Nicolo; de Jong, Paul; De La Taille, Christophe; De la Torre, Hector; De Lotto, Barbara; de Mora, Lee; De Nooij, Lucie; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; De Zorzi, Guido; Dean, Simon; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dechenaux, Benjamin; Dedovich, Dmitri; Degenhardt, James; Del Papa, Carlo; Del Peso, Jose; Del Prete, Tarcisio; Delemontex, Thomas; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delruelle, Nicolas; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demirkoz, Bilge; Deng, Jianrong; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Devetak, Erik; Deviveiros, Pier-Olivier; Dewhurst, Alastair; DeWilde, Burton; Dhaliwal, Saminder; Dhullipudi, Ramasudhakar; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Luise, Silvestro; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Diaz, Marco Aurelio; Diblen, Faruk; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Dindar Yagci, Kamile; Dingfelder, Jochen; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Barros do Vale, Maria Aline; Do Valle Wemans, André; Doan, Thi Kieu Oanh; Dobbs, Matt; Dobinson, Robert; Dobos, Daniel; Dobson, Ellie; Dodd, Jeremy; Doglioni, Caterina; Doherty, Tom; Doi, Yoshikuni; Dolejsi, Jiri; Dolenc, Irena; Dolezal, Zdenek; Dolgoshein, Boris; Dohmae, Takeshi; Donadelli, Marisilvia; Donega, Mauro; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dos Anjos, Andre; Dosil, Mireia; Dotti, Andrea; Dova, Maria-Teresa; Doxiadis, Alexander; Doyle, Tony; Drasal, Zbynek; Drees, Jürgen; Dressnandt, Nandor; Drevermann, Hans; Driouichi, Chafik; Dris, Manolis; Dubbert, Jörg; Dube, Sourabh; Duchovni, Ehud; Duckeck, Guenter; Dudarev, Alexey; Dudziak, Fanny; Dührssen, Michael; Duerdoth, Ian; Duflot, Laurent; Dufour, Marc-Andre; Dunford, Monica; Duran Yildiz, Hatice; Duxfield, Robert; Dwuznik, Michal; Dydak, Friedrich; Düren, Michael; Ebenstein, William; Ebke, Johannes; Eckweiler, Sebastian; Edmonds, Keith; Edwards, Clive; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Ehrich, Thies; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Eisenhandler, Eric; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Katherine; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Engelmann, Roderich; Engl, Albert; Epp, Brigitte; Eppig, Andrew; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Escobar, Carlos; Espinal Curull, Xavier; Esposito, Bellisario; Etienne, Francois; Etienvre, Anne-Isabelle; Etzion, Erez; Evangelakou, Despoina; Evans, Hal; Fabbri, Laura; Fabre, Caroline; Fakhrutdinov, Rinat; Falciano, Speranza; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farley, Jason; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassnacht, Patrick; Fassouliotis, Dimitrios; Fatholahzadeh, Baharak; Favareto, Andrea; Fayard, Louis; Fazio, Salvatore; Febbraro, Renato; Federic, Pavol; Fedin, Oleg; Fedorko, Woiciech; Fehling-Kaschek, Mirjam; Feligioni, Lorenzo; Fellmann, Denis; Feng, Cunfeng; Feng, Eric; Fenyuk, Alexander; Ferencei, Jozef; Ferland, Jonathan; Fernando, Waruna; Ferrag, Samir; Ferrando, James; Ferrara, Valentina; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrer, Maria Lorenza; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipčič, Andrej; Filippas, Anastasios; Filthaut, Frank; Fincke-Keeler, Margret; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Gordon; Fischer, Peter; Fisher, Matthew; Flechl, Martin; Fleck, Ivor; Fleckner, Johanna; Fleischmann, Philipp; Fleischmann, Sebastian; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Flowerdew, Michael; Fokitis, Manolis; Fonseca Martin, Teresa; Forbush, David Alan; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Foster, Joe; Fournier, Daniel; Foussat, Arnaud; Fowler, Andrew; Fowler, Ken; Fox, Harald; Francavilla, Paolo; Franchino, Silvia; Francis, David; Frank, Tal; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; Fratina, Sasa; French, Sky; Friedrich, Conrad; Friedrich, Felix; Froeschl, Robert; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fulsom, Bryan Gregory; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gadfort, Thomas; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Gallas, Elizabeth; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Gan, KK; Gao, Yongsheng; Gapienko, Vladimir; Gaponenko, Andrei; Garberson, Ford; Garcia-Sciveres, Maurice; García, Carmen; García Navarro, José Enrique; Gardner, Robert; Garelli, Nicoletta; Garitaonandia, Hegoi; Garonne, Vincent; Garvey, John; Gatti, Claudio; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gauzzi, Paolo; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gayde, Jean-Christophe; Gazis, Evangelos; Ge, Peng; Gecse, Zoltan; Gee, Norman; Geerts, Daniël Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Hélène; Gentile, Simonetta; George, Matthias; George, Simon; Gerlach, Peter; Gershon, Avi; Geweniger, Christoph; Ghazlane, Hamid; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giakoumopoulou, Victoria; Giangiobbe, Vincent; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Adam; Gibson, Stephen; Gilbert, Laura; Gilewsky, Valentin; Gillberg, Dag; Gillman, Tony; Gingrich, Douglas; Ginzburg, Jonatan; Giokaris, Nikos; Giordani, MarioPaolo; Giordano, Raffaele; Giorgi, Francesco Michelangelo; Giovannini, Paola; Giraud, Pierre-Francois; Giugni, Danilo; Giunta, Michele; Giusti, Paolo; Gjelsten, Børge Kile; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glazov, Alexandre; Glitza, Karl-Walter; Glonti, George; Goddard, Jack Robert; Godfrey, Jennifer; Godlewski, Jan; Goebel, Martin; Göpfert, Thomas; Goeringer, Christian; Gössling, Claus; Göttfert, Tobias; Goldfarb, Steven; Golling, Tobias; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; Gonidec, Allain; Gonzalez, Saul; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez Silva, Laura; Gonzalez-Sevilla, Sergio; Goodson, Jeremiah Jet; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorfine, Grant; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goryachev, Vladimir; Gosdzik, Bjoern; Goshaw, Alfred; Gosselink, Martijn; Gostkin, Mikhail Ivanovitch; Gough Eschrich, Ivo; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Gozpinar, Serdar; Grabowska-Bold, Iwona; Grafström, Per; Grahn, Karl-Johan; Grancagnolo, Francesco; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Grau, Nathan; Gray, Heather; Gray, Julia Ann; Graziani, Enrico; Grebenyuk, Oleg; Greenshaw, Timothy; Greenwood, Zeno Dixon; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grigalashvili, Nugzar; Grillo, Alexander; Grinstein, Sebastian; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Gross, Eilam; Grosse-Knetter, Joern; Groth-Jensen, Jacob; Grybel, Kai; Guarino, Victor; Guest, Daniel; Guicheney, Christophe; Guida, Angelo; Guindon, Stefan; Guler, Hulya; Gunther, Jaroslav; Guo, Bin; Guo, Jun; Gupta, Ambreesh; Gusakov, Yury; Gushchin, Vladimir; Gutierrez, Phillip; Guttman, Nir; Gutzwiller, Olivier; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haas, Stefan; Haber, Carl; Hadavand, Haleh Khani; Hadley, David; Haefner, Petra; Hahn, Ferdinand; Haider, Stefan; Hajduk, Zbigniew; Hakobyan, Hrachya; Hall, David; Haller, Johannes; Hamacher, Klaus; Hamal, Petr; Hamer, Matthias; Hamilton, Andrew; Hamilton, Samuel; Han, Hongguang; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Handel, Carsten; Hanke, Paul; Hansen, John Renner; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hansson, Per; Hara, Kazuhiko; Hare, Gabriel; Harenberg, Torsten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Harrison, Karl; Hartert, Jochen; Hartjes, Fred; Haruyama, Tomiyoshi; Harvey, Alex; Hasegawa, Satoshi; Hasegawa, Yoji; Hassani, Samira; Hatch, Mark; Hauff, Dieter; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawes, Brian; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Anthony David; Hawkins, Donovan; Hayakawa, Takashi; Hayashi, Takayasu; Hayden, Daniel; Hayward, Helen; Haywood, Stephen; Hazen, Eric; He, Mao; Head, Simon; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heinemann, Beate; Heisterkamp, Simon; Helary, Louis; Heller, Claudio; Heller, Matthieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, Robert; Henke, Michael; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Henry-Couannier, Frédéric; Hensel, Carsten; Henß, Tobias; Medina Hernandez, Carlos; Hernández Jiménez, Yesenia; Herrberg, Ruth; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Higón-Rodriguez, Emilio; Hill, Daniel; Hill, John; Hill, Norman; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirsch, Florian; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoffman, Julia; Hoffmann, Dirk; Hohlfeld, Marc; Holder, Martin; Holmgren, Sven-Olof; Holy, Tomas; Holzbauer, Jenny; Homma, Yasuhiro; Hong, Tae Min; Hooft van Huysduynen, Loek; Horazdovsky, Tomas; Horn, Claus; Horner, Stephan; Hostachy, Jean-Yves; Hou, Suen; Houlden, Michael; Hoummada, Abdeslam; Howarth, James; Howell, David; Hristova, Ivana; Hrivnac, Julius; Hruska, Ivan; Hryn'ova, Tetiana; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Huang, Guang Shun; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huettmann, Antje; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Hughes-Jones, Richard; Huhtinen, Mika; Hurst, Peter; Hurwitz, Martina; Husemann, Ulrich; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibbotson, Michael; Ibragimov, Iskander; Ichimiya, Ryo; Iconomidou-Fayard, Lydia; Idarraga, John; Iengo, Paolo; Igonkina, Olga; Ikegami, Yoichi; Ikeno, Masahiro; Ilchenko, Yuri; Iliadis, Dimitrios; Ilic, Nikolina; Imori, Masatoshi; Ince, Tayfun; Inigo-Golfin, Joaquin; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Irles Quiles, Adrian; Isaksson, Charlie; Ishikawa, Akimasa; Ishino, Masaya; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Ivashin, Anton; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, John; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakubek, Jan; Jana, Dilip; Jansen, Eric; Jansen, Hendrik; Jantsch, Andreas; Janus, Michel; Jarlskog, Göran; Jeanty, Laura; Jelen, Kazimierz; Jen-La Plante, Imai; Jenni, Peter; Jeremie, Andrea; Jež, Pavel; Jézéquel, Stéphane; Jha, Manoj Kumar; Ji, Haoshuang; Ji, Weina; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Ge; Jin, Shan; Jinnouchi, Osamu; Joergensen, Morten Dam; Joffe, David; Johansen, Lars; Johansen, Marianne; Johansson, Erik; Johansson, Per; Johnert, Sebastian; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tegid; Jones, Tim; Jonsson, Ove; Joram, Christian; Jorge, Pedro; Joseph, John; Joshi, Kiran Daniel; Jovicevic, Jelena; Jovin, Tatjana; Ju, Xiangyang; Jung, Christian; Jungst, Ralph Markus; Juranek, Vojtech; Jussel, Patrick; Juste Rozas, Aurelio; Kabachenko, Vasily; Kabana, Sonja; Kaci, Mohammed; Kaczmarska, Anna; Kadlecik, Peter; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kaiser, Steffen; Kajomovitz, Enrique; Kalinin, Sergey; Kalinovskaya, Lidia; Kama, Sami; Kanaya, Naoko; Kaneda, Michiru; Kaneti, Steven; Kanno, Takayuki; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kaplon, Jan; Kar, Deepak; Karagounis, Michael; Karagoz, Muge; Karnevskiy, Mikhail; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasieczka, Gregor; Kass, Richard; Kastanas, Alex; Kataoka, Mayuko; Kataoka, Yousuke; Katsoufis, Elias; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kayl, Manuel; Kazanin, Vassili; Kazarinov, Makhail; Keeler, Richard; Kehoe, Robert; Keil, Markus; Kekelidze, George; Keller, John; Kennedy, John; Kenyon, Mike; Kepka, Oldrich; Kerschen, Nicolas; Kerševan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Keung, Justin; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Kharchenko, Dmitri; Khodinov, Alexander; Kholodenko, Anatoli; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Nikolai; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hyeon Jin; Kim, Min Suk; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; Kirk, Julie; Kirsch, Lawrence; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kittelmann, Thomas; Kiver, Andrey; Kladiva, Eduard; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klemetti, Miika; Klier, Amit; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klinkby, Esben; Klioutchnikova, Tatiana; Klok, Peter; Klous, Sander; Kluge, Eike-Erik; Kluge, Thomas; Kluit, Peter; Kluth, Stefan; Knecht, Neil; Kneringer, Emmerich; Knobloch, Juergen; Knoops, Edith; Knue, Andrea; Ko, Byeong Rok; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Köneke, Karsten; König, Adriaan; Koenig, Sebastian; Köpke, Lutz; Koetsveld, Folkert; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kogan, Lucy Anne; Kohlmann, Simon; Kohn, Fabian; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kokott, Thomas; Kolachev, Guennady; Kolanoski, Hermann; Kolesnikov, Vladimir; Koletsou, Iro; Koll, James; Kollefrath, Michael; Kolya, Scott; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kono, Takanori; Kononov, Anatoly; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kootz, Andreas; Koperny, Stefan; Korcyl, Krzysztof; Kordas, Kostantinos; Koreshev, Victor; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotamäki, Miikka Juhani; Kotov, Sergey; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, James; Kraus, Jana; Krejci, Frantisek; Kretzschmar, Jan; Krieger, Nina; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Kruker, Tobias; Krumnack, Nils; Krumshteyn, Zinovii; Kruth, Andre; Kubota, Takashi; Kuday, Sinan; Kuehn, Susanne; Kugel, Andreas; Kuhl, Thorsten; Kuhn, Dietmar; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kummer, Christian; Kuna, Marine; Kundu, Nikhil; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurata, Masakazu; Kurochkin, Yurii; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; Kwee, Regina; La Rosa, Alessandro; La Rotonda, Laura; Labarga, Luis; Labbe, Julien; Lablak, Said; Lacasta, Carlos; Lacava, Francesco; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laisne, Emmanuel; Lamanna, Massimo; Lambourne, Luke; Lampen, Caleb; Lampl, Walter; Lancon, Eric; Landgraf, Ulrich; Landon, Murrough; Lane, Jenna; Lange, Clemens; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Larionov, Anatoly; Larner, Aimee; Lasseur, Christian; Lassnig, Mario; Laurelli, Paolo; Lavorini, Vincenzo; Lavrijsen, Wim; Laycock, Paul; Lazarev, Alexandre; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Maner, Christophe; Le Menedeu, Eve; Lebel, Céline; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Michel; Legendre, Marie; Leger, Annie; LeGeyt, Benjamin; Legger, Federica; Leggett, Charles; Lehmacher, Marc; Lehmann Miotto, Giovanna; Lei, Xiaowen; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Leltchouk, Mikhail; Lemmer, Boris; Lendermann, Victor; Leney, Katharine; Lenz, Tatiana; Lenzen, Georg; Lenzi, Bruno; Leonhardt, Kathrin; Leontsinis, Stefanos; Lepold, Florian; Leroy, Claude; Lessard, Jean-Raphael; Lesser, Jonas; Lester, Christopher; Lester, Christopher Michael; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Levitski, Mikhail; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bo; Li, Haifeng; Li, Shu; Li, Xuefei; Liang, Zhijun; Liao, Hongbo; Liberti, Barbara; Lichard, Peter; Lichtnecker, Markus; Lie, Ki; Liebig, Wolfgang; Limbach, Christian; Limosani, Antonio; Limper, Maaike; Lin, Simon; Linde, Frank; Linnemann, James; Lipeles, Elliot; Lipinsky, Lukas; Lipniacka, Anna; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Chuanlei; Liu, Dong; Liu, Hao; Liu, Jianbei; Liu, Minghui; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Loddenkoetter, Thomas; Loebinger, Fred; Loginov, Andrey; Loh, Chang Wei; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Loken, James; Lombardo, Vincenzo Paolo; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Loscutoff, Peter; Lo Sterzo, Francesco; Losty, Michael; Lou, Xinchou; Lounis, Abdenour; Loureiro, Karina; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Ludwig, Andreas; Ludwig, Dörthe; Ludwig, Inga; Ludwig, Jens; Luehring, Frederick; Luijckx, Guy; Lukas, Wolfgang; Lumb, Debra; Luminari, Lamberto; Lund, Esben; Lund-Jensen, Bengt; Lundberg, Björn; Lundberg, Johan; Lundquist, Johan; Lungwitz, Matthias; Lutz, Gerhard; Lynn, David; Lys, Jeremy; Lytken, Else; Ma, Hong; Ma, Lian Liang; Macana Goia, Jorge Andres; Maccarrone, Giovanni; Macchiolo, Anna; Maček, Boštjan; Machado Miguens, Joana; Mackeprang, Rasmus; Madaras, Ronald; Mader, Wolfgang; Maenner, Reinhard; Maeno, Tadashi; Mättig, Peter; Mättig, Stefan; Magnoni, Luca; Magradze, Erekle; Mahalalel, Yair; Mahboubi, Kambiz; Mahmoud, Sara; Mahout, Gilles; Maiani, Camilla; Maidantchik, Carmen; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malaescu, Bogdan; Malecki, Pawel; Malecki, Piotr; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mameghani, Raphael; Mamuzic, Judita; Manabe, Atsushi; Mandelli, Luciano; Mandić, Igor; Mandrysch, Rocco; Maneira, José; Mangeard, Pierre-Simon; Manhaes de Andrade Filho, Luciano; Manjavidze, Ioseb; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Manz, Andreas; Mapelli, Alessandro; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchese, Fabrizio; Marchiori, Giovanni; Marcisovsky, Michal; Marino, Christopher; Marroquim, Fernando; Marshall, Robin; Marshall, Zach; Martens, Kalen; Marti-Garcia, Salvador; Martin, Andrew; Martin, Brian; Martin, Brian Thomas; Martin, Franck Francois; Martin, Jean-Pierre; Martin, Philippe; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martin-Haugh, Stewart; Martinez, Mario; Martinez Outschoorn, Verena; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massaro, Graziano; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Matricon, Pierre; Matsumoto, Hiroshi; Matsunaga, Hiroyuki; Matsushita, Takashi; Mattravers, Carly; Maugain, Jean-Marie; Maurer, Julien; Maxfield, Stephen; May, Edward; Mayne, Anna; Mazini, Rachid; Mazur, Michael; Mazzaferro, Luca; Mazzanti, Marcello; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; McGlone, Helen; Mchedlidze, Gvantsa; McLaren, Robert Andrew; Mclaughlan, Tom; McMahon, Steve; McPherson, Robert; Meade, Andrew; Mechnich, Joerg; Mechtel, Markus; Medinnis, Mike; Meera-Lebbai, Razzak; Meguro, Tatsuma; Mehdiyev, Rashid; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Meloni, Federico; Mendoza Navas, Luis; Meng, Zhaoxia; Mengarelli, Alberto; Menke, Sven; Menot, Claude; Meoni, Evelin; Mercurio, Kevin Michael; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Merritt, Hayes; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Meyer, Joerg; Meyer, Thomas Christian; Meyer, W Thomas; Miao, Jiayuan; Michal, Sebastien; Micu, Liliana; Middleton, Robin; Migas, Sylwia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Miller, David; Miller, Robert; Mills, Bill; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Miñano Moya, Mercedes; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Miralles Verge, Lluis; Misiejuk, Andrzej; Mitrevski, Jovan; Mitrofanov, Gennady; Mitsou, Vasiliki A; Mitsui, Shingo; Miyagawa, Paul; Miyazaki, Kazuki; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Mockett, Paul; Moed, Shulamit; Moeller, Victoria; Mönig, Klaus; Möser, Nicolas; Mohapatra, Soumya; Mohr, Wolfgang; Mohrdieck-Möck, Susanne; Moles-Valls, Regina; Molina-Perez, Jorge; Monk, James; Monnier, Emmanuel; Montesano, Simone; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Moorhead, Gareth; Mora Herrera, Clemencia; Moraes, Arthur; Morange, Nicolas; Morel, Julien; Morello, Gianfranco; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Marcus; Morii, Masahiro; Morin, Jerome; Morley, Anthony Keith; Mornacchi, Giuseppe; Morozov, Sergey; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Mudrinic, Mihajlo; Mueller, Felix; Mueller, James; Mueller, Klemens; Müller, Thomas; Mueller, Timo; Muenstermann, Daniel; Munwes, Yonathan; Murray, Bill; Mussche, Ido; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nadal, Jordi; Nagai, Koichi; Nagano, Kunihiro; Nagarkar, Advait; Nagasaka, Yasushi; Nagel, Martin; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Nanava, Gizo; Napier, Austin; Narayan, Rohin; Nash, Michael; Nation, Nigel; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Neal, Homer; Nebot, Eduardo; Nechaeva, Polina; Neep, Thomas James; Negri, Andrea; Negri, Guido; Nektarijevic, Snezana; Nelson, Andrew; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neusiedl, Andrea; Neves, Ricardo; Nevski, Pavel; Newman, Paul; Nguyen Thi Hong, Van; Nickerson, Richard; Nicolaidou, Rosy; Nicolas, Ludovic; Nicquevert, Bertrand; Niedercorn, Francois; Nielsen, Jason; Niinikoski, Tapio; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolaev, Kirill; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsen, Henrik; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nishiyama, Tomonori; Nisius, Richard; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Nordberg, Markus; Norton, Peter; Novakova, Jana; Nozaki, Mitsuaki; Nozka, Libor; Nugent, Ian Michael; Nuncio-Quiroz, Adriana-Elizabeth; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; O'Brien, Brendan Joseph; O'Neale, Steve; O'Neil, Dugan; O'Shea, Val; Oakes, Louise Beth; Oakham, Gerald; Oberlack, Horst; Ocariz, Jose; Ochi, Atsuhiko; Oda, Susumu; Odaka, Shigeru; Odier, Jerome; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohshima, Takayoshi; Ohshita, Hidetoshi; Okada, Shogo; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Olcese, Marco; Olchevski, Alexander; Olivares Pino, Sebastian Andres; Oliveira, Miguel Alfonso; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olivito, Dominick; Olszewski, Andrzej; Olszowska, Jolanta; Omachi, Chihiro; Onofre, António; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Orlov, Iliya; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Osuna, Carlos; Otero y Garzon, Gustavo; Ottersbach, John; Ouchrif, Mohamed; Ouellette, Eric; Ould-Saada, Farid; Ouraou, Ahmimed; Ouyang, Qun; Ovcharova, Ana; Owen, Mark; Owen, Simon; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagan Griso, Simone; Paganis, Efstathios; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Paleari, Chiara; Palestini, Sandro; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panes, Boris; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Panuskova, Monika; Paolone, Vittorio; Papadelis, Aras; Papadopoulou, Theodora; Paramonov, Alexander; Paredes Hernandez, Daniela; Park, Woochun; Parker, Andy; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pashapour, Shabnaz; Pasqualucci, Enrico; Passaggio, Stefano; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pecsy, Martin; Pedraza Morales, Maria Isabel; Peleganchuk, Sergey; Pelikan, Daniel; Peng, Haiping; Penning, Bjoern; Penson, Alexander; Penwell, John; Perantoni, Marcelo; Perez, Kerstin; Perez Cavalcanti, Tiago; Perez Codina, Estel; Pérez García-Estañ, María Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrino, Roberto; Perrodo, Pascal; Persembe, Seda; Peshekhonov, Vladimir; Peters, Krisztian; Petersen, Brian; Petersen, Jorgen; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Petschull, Dennis; Petteni, Michele; Pezoa, Raquel; Phan, Anna; Phillips, Peter William; Piacquadio, Giacinto; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Piec, Sebastian Marcin; Piegaia, Ricardo; Pignotti, David; Pilcher, James; Pilkington, Andrew; Pina, João Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Ping, Jialun; Pinto, Belmiro; Pirotte, Olivier; Pizio, Caterina; Placakyte, Ringaile; Plamondon, Mathieu; Pleier, Marc-Andre; Pleskach, Anatoly; Plotnikova, Elena; Poblaguev, Andrei; Poddar, Sahill; Podlyski, Fabrice; Poggioli, Luc; Poghosyan, Tatevik; Pohl, Martin; Polci, Francesco; Polesello, Giacomo; Policicchio, Antonio; Polini, Alessandro; Poll, James; Polychronakos, Venetios; Pomarede, Daniel Marc; Pomeroy, Daniel; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Portell Bueso, Xavier; Posch, Christoph; Pospelov, Guennady; Pospisil, Stanislav; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Prabhu, Robindra; Pralavorio, Pascal; Pranko, Aliaksandr; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Pretzl, Klaus Peter; Pribyl, Lukas; Price, Darren; Price, Joe; Price, Lawrence; Price, Michael John; Prieur, Damien; Primavera, Margherita; Prokofiev, Kirill; Prokoshin, Fedor; Protopopescu, Serban; Proudfoot, James; Prudent, Xavier; Przybycien, Mariusz; Przysiezniak, Helenka; Psoroulas, Serena; Ptacek, Elizabeth; Pueschel, Elisa; Purdham, John; Purohit, Milind; Puzo, Patrick; Pylypchenko, Yuriy; Qian, Jianming; Qian, Zuxuan; Qin, Zhonghua; Quadt, Arnulf; Quarrie, David; Quayle, William; Quinonez, Fernando; Raas, Marcel; Radescu, Voica; Radics, Balint; Radloff, Peter; Rador, Tonguc; Ragusa, Francesco; Rahal, Ghita; Rahimi, Amir; Rahm, David; Rajagopalan, Srinivasan; Rammensee, Michael; Rammes, Marcus; Randle-Conde, Aidan Sean; Randrianarivony, Koloina; Ratoff, Peter; Rauscher, Felix; Rave, Tobias Christian; Raymond, Michel; Read, Alexander Lincoln; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Reichold, Armin; Reinherz-Aronis, Erez; Reinsch, Andreas; Reisinger, Ingo; Rembser, Christoph; Ren, Zhongliang; Renaud, Adrien; Rescigno, Marco; Resconi, Silvia; Resende, Bernardo; Reznicek, Pavel; Rezvani, Reyhaneh; Richards, Alexander; Richter, Robert; Richter-Was, Elzbieta; Ridel, Melissa; Rijpstra, Manouk; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Rios, Ryan Randy; Riu, Imma; Rivoltella, Giancesare; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Rocha de Lima, Jose Guilherme; Roda, Chiara; Roda Dos Santos, Denis; Rodriguez, Diego; Roe, Adam; Roe, Shaun; Røhne, Ole; Rojo, Victoria; Rolli, Simona; Romaniouk, Anatoli; Romano, Marino; Romanov, Victor; Romeo, Gaston; Romero Adam, Elena; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Anthony; Rose, Matthew; Rosenbaum, Gabriel; Rosenberg, Eli; Rosendahl, Peter Lundgaard; Rosenthal, Oliver; Rosselet, Laurent; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexander; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rubinskiy, Igor; Ruckert, Benjamin; Ruckstuhl, Nicole; Rud, Viacheslav; Rudolph, Christian; Rudolph, Gerald; Rühr, Frederik; Ruggieri, Federico; Ruiz-Martinez, Aranzazu; Rumiantsev, Viktor; Rumyantsev, Leonid; Runge, Kay; Rurikova, Zuzana; Rusakovich, Nikolai; Rutherfoord, John; Ruwiedel, Christoph; Ruzicka, Pavel; Ryabov, Yury; Ryadovikov, Vasily; Ryan, Patrick; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Rzaeva, Sevda; Saavedra, Aldo; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salek, David; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvachua Ferrando, Belén; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Samset, Björn Hallvard; Sanchez, Arturo; Sanchez Martinez, Victoria; Sandaker, Heidi; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sandvoss, Stephan; Sankey, Dave; Sansoni, Andrea; Santamarina Rios, Cibran; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Saraiva, João; Sarangi, Tapas; Sarkisyan-Grinbaum, Edward; Sarri, Francesca; Sartisohn, Georg; Sasaki, Osamu; Sasao, Noboru; Satsounkevitch, Igor; Sauvage, Gilles; Sauvan, Emmanuel; Sauvan, Jean-Baptiste; Savard, Pierre; Savinov, Vladimir; Savu, Dan Octavian; Sawyer, Lee; Saxon, David; Saxon, James; Says, Louis-Pierre; Sbarra, Carla; Sbrizzi, Antonio; Scallon, Olivia; Scannicchio, Diana; Scarcella, Mark; Schaarschmidt, Jana; Schacht, Peter; Schaefer, Douglas; Schäfer, Uli; Schaepe, Steffen; Schaetzel, Sebastian; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R. Dean; Schamov, Andrey; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schioppa, Marco; Schlenker, Stefan; Schlereth, James; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Sebastian; Schmitz, Martin; Schöning, André; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schram, Malachi; Schroeder, Christian; Schroer, Nicolai; Schuler, Georges; Schultens, Martin Johannes; Schultes, Joachim; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Jan; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwanenberger, Christian; Schwartzman, Ariel; Schwemling, Philippe; Schwienhorst, Reinhard; Schwierz, Rainer; Schwindling, Jerome; Schwindt, Thomas; Schwoerer, Maud; Sciolla, Gabriella; Scott, Bill; Searcy, Jacob; Sedov, George; Sedykh, Evgeny; Segura, Ester; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekula, Stephen; Selbach, Karoline Elfriede; Seliverstov, Dmitry; Sellden, Bjoern; Sellers, Graham; Seman, Michal; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Seuster, Rolf; Severini, Horst; Sevior, Martin; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shank, James; Shao, Qi Tao; Shapiro, Marjorie; Shatalov, Pavel; Shaver, Leif; Shaw, Kate; Sherman, Daniel; Sherwood, Peter; Shibata, Akira; Shichi, Hideharu; Shimizu, Shima; Shimojima, Makoto; Shin, Taeksu; Shiyakova, Maria; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Sicho, Petr; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silbert, Ohad; Silva, José; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simmons, Brinick; Simoniello, Rosa; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjölin, Jörgen; Sjursen, Therese; Skinnari, Louise Anastasia; Skottowe, Hugh Philip; Skovpen, Kirill; Skubic, Patrick; Skvorodnev, Nikolai; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Sloper, John erik; Smakhtin, Vladimir; Smart, Ben; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Ben Campbell; Smith, Douglas; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snow, Steve; Snow, Joel; Snyder, Scott; Soares, Mara; Sobie, Randall; Sodomka, Jaromir; Soffer, Abner; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solfaroli Camillocci, Elena; Solodkov, Alexander; Solovyanov, Oleg; Soni, Nitesh; Sopko, Vit; Sopko, Bruno; Sosebee, Mark; Soualah, Rachik; Soukharev, Andrey; Spagnolo, Stefania; Spanò, Francesco; Spighi, Roberto; Spigo, Giancarlo; Spila, Federico; Spiwoks, Ralf; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St Denis, Richard Dante; Stahlman, Jonathan; Stamen, Rainer; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staude, Arnold; Stavina, Pavel; Steele, Genevieve; Steinbach, Peter; Steinberg, Peter; Stekl, Ivan; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stern, Sebastian; Stevenson, Kyle; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoerig, Kathrin; Stoicea, Gabriel; Stonjek, Stefan; Strachota, Pavel; Stradling, Alden; Straessner, Arno; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strang, Michael; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Strong, John; Stroynowski, Ryszard; Strube, Jan; Stugu, Bjarne; Stumer, Iuliu; Stupak, John; Sturm, Philipp; Styles, Nicholas Adam; Soh, Dart-yin; Su, Dong; Subramania, Halasya Siva; Succurro, Antonella; Sugaya, Yorihito; Sugimoto, Takuya; Suhr, Chad; Suita, Koichi; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Sushkov, Serge; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Suzuki, Yuta; Svatos, Michal; Sviridov, Yuri; Swedish, Stephen; Sykora, Ivan; Sykora, Tomas; Szeless, Balazs; Sánchez, Javier; Ta, Duc; Tackmann, Kerstin; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takahashi, Yuta; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tamsett, Matthew; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanaka, Yoshito; Tanasijczuk, Andres Jorge; Tani, Kazutoshi; Tannoury, Nancy; Tappern, Geoffrey; Tapprogge, Stefan; Tardif, Dominique; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tassi, Enrico; Tatarkhanov, Mous; Tayalati, Yahya; Taylor, Christopher; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teinturier, Marthe; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Terada, Susumu; Terashi, Koji; Terron, Juan; Testa, Marianna; Teuscher, Richard; Thadome, Jocelyn; Therhaag, Jan; Theveneaux-Pelzer, Timothée; Thioye, Moustapha; Thoma, Sascha; Thomas, Juergen; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Thun, Rudolf; Tian, Feng; Tibbetts, Mark James; Tic, Tomáš; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tipton, Paul; Tique Aires Viegas, Florbela De Jes; Tisserant, Sylvain; Toczek, Barbara; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokár, Stanislav; Tokunaga, Kaoru; Tokushuku, Katsuo; Tollefson, Kirsten; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Tong, Guoliang; Tonoyan, Arshak; Topfel, Cyril; Topilin, Nikolai; Torchiani, Ingo; Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alesandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Trischuk, William; Trivedi, Arjun; Trocmé, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; Trzebinski, Maciej; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiakiris, Menelaos; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsung, Jieh-Wen; Tsuno, Soshi; Tsybychev, Dmitri; Tua, Alan; Tudorache, Alexandra; Tudorache, Valentina; Tuggle, Joseph; Turala, Michal; Turecek, Daniel; Turk Cakir, Ilkay; Turlay, Emmanuel; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Tzanakos, George; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ugland, Maren; Uhlenbrock, Mathias; Uhrmacher, Michael; Ukegawa, Fumihiko; Unal, Guillaume; Underwood, David; Undrus, Alexander; Unel, Gokhan; Unno, Yoshinobu; Urbaniec, Dustin; Usai, Giulio; Uslenghi, Massimiliano; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Vahsen, Sven; Valenta, Jan; Valente, Paolo; Valentinetti, Sara; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; van der Graaf, Harry; van der Kraaij, Erik; Van Der Leeuw, Robin; van der Poel, Egge; van der Ster, Daniel; van Eldik, Niels; van Gemmeren, Peter; van Kesteren, Zdenko; van Vulpen, Ivo; Vanadia, Marco; Vandelli, Wainer; Vandoni, Giovanna; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Varela Rodriguez, Fernando; Vari, Riccardo; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vassilakopoulos, Vassilios; Vazeille, Francois; Vazquez Schroeder, Tamara; Vegni, Guido; Veillet, Jean-Jacques; Vellidis, Constantine; Veloso, Filipe; Veness, Raymond; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinek, Elisabeth; Vinogradov, Vladimir; Virchaux, Marc; Virzi, Joseph; Vitells, Ofer; Viti, Michele; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vladoiu, Dan; Vlasak, Michal; Vlasov, Nikolai; Vogel, Adrian; Vokac, Petr; Volpi, Guido; Volpi, Matteo; Volpini, Giovanni; von der Schmitt, Hans; von Loeben, Joerg; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorobiev, Alexander; Vorwerk, Volker; Vos, Marcel; Voss, Rudiger; Voss, Thorsten Tobias; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vu Anh, Tuan; Vuillermet, Raphael; Vukotic, Ilija; Wagner, Wolfgang; Wagner, Peter; Wahlen, Helmut; Wakabayashi, Jun; Walch, Shannon; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Wang, Chiho; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Joshua C; Wang, Rui; Wang, Song-Ming; Wang, Tan; Warburton, Andreas; Ward, Patricia; Warsinsky, Markus; Washbrook, Andrew; Wasicki, Christoph; Watkins, Peter; Watson, Alan; Watson, Ian; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Anthony; Waugh, Ben; Weber, Marc; Weber, Michele; Weber, Pavel; Weidberg, Anthony; Weigell, Philipp; Weingarten, Jens; Weiser, Christian; Wellenstein, Hermann; Wells, Phillippa; Wenaus, Torre; Wendland, Dennis; Wendler, Shanti; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Werth, Michael; Wessels, Martin; Wetter, Jeffrey; Weydert, Carole; Whalen, Kathleen; Wheeler-Ellis, Sarah Jane; Whitaker, Scott; White, Andrew; White, Martin; White, Sebastian; Whitehead, Samuel Robert; Whiteson, Daniel; Whittington, Denver; Wicek, Francois; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilhelm, Ivan; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Eric; Williams, Hugh; Willis, William; Willocq, Stephane; Wilson, John; Wilson, Michael Galante; Wilson, Alan; Wingerter-Seez, Isabelle; Winkelmann, Stefan; Winklmeier, Frank; Wittgen, Matthias; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wong, Wei-Cheng; Wooden, Gemma; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wraight, Kenneth; Wright, Catherine; Wright, Michael; Wrona, Bozydar; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wunstorf, Renate; Wynne, Benjamin; Xella, Stefania; Xiao, Meng; Xie, Song; Xie, Yigang; Xu, Chao; Xu, Da; Xu, Guofa; Yabsley, Bruce; Yacoob, Sahal; Yamada, Miho; Yamaguchi, Hiroshi; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamaoka, Jared; Yamazaki, Takayuki; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Un-Ki; Yang, Yi; Yang, Yi; Yang, Zhaoyu; Yanush, Serguei; Yao, Yushu; Yasu, Yoshiji; Ybeles Smit, Gabriel Valentijn; Ye, Jingbo; Ye, Shuwei; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Riktura; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, Dantong; Yu, Jaehoon; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Zabinski, Bartlomiej; Zaets, Vassilli; Zaidan, Remi; Zaitsev, Alexander; Zajacova, Zuzana; Zanello, Lucia; Zaytsev, Alexander; Zeitnitz, Christian; Zeller, Michael; Zeman, Martin; Zemla, Andrzej; Zendler, Carolin; Zenin, Oleg; Ženiš, Tibor; Zinonos, Zinonas; Zenz, Seth; Zerwas, Dirk; Zevi della Porta, Giovanni; Zhan, Zhichao; Zhang, Dongliang; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Long; Zhao, Tianchi; Zhao, Zhengguo; Zhemchugov, Alexey; Zheng, Shuchen; Zhong, Jiahang; Zhou, Bing; Zhou, Ning; Zhou, Yue; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhuravlov, Vadym; Zieminska, Daria; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Ziolkowski, Michael; Zitoun, Robert; Živković, Lidija; Zmouchko, Viatcheslav; Zobernig, Georg; Zoccoli, Antonio; Zsenei, Andras; zur Nedden, Martin; Zutshi, Vishnu; Zwalinski, Lukasz

2012-06-21

A measurement of the jet activity in ttbar events produced in proton-proton collisions at a centre-of-mass energy of 7 TeV is presented, using 2.05 fb^-1 of integrated luminosity collected by the ATLAS detector at the Large Hadron Collider. The ttbar events are selected in the dilepton decay channel with two identified b-jets from the top quark decays. Events are vetoed if they contain an additional jet with transverse momentum above a threshold in a central rapidity interval. The fraction of events surviving the jet veto is presented as a function of this threshold for four different central rapidity interval definitions. An alternate measurement is also performed, in which events are vetoed if the scalar transverse momentum sum of the additional jets in each rapidity interval is above a threshold. In both measurements, the data are corrected for detector effects and compared to the theoretical models implemented in MC@NLO, POWHEG, ALPGEN and SHERPA. The experimental uncertainties are often smaller than the ...

The experiment 787 high efficiency photon veto detector in the 20 - 300 MEV range

International Nuclear Information System (INIS)

Poutissou, J. M.

1992-12-01

Experiment E787 is searching for the rare decay K → πνν at the Brookhaven Alternating Gradient Synchrotron (AGS). To suppress the background from the dominant K → ππ o branch, a fast lead scintillator sandwich veto assembly system was used. An inefficiency level of ∼ 1 x 10 -6 has been achieved for detecting π o . The limitations are in part geometrical in part due to photonuclear interactions. Our present understanding of these limitations will be presented together with our upgrading plans using pure CSI crystals. (author). 7 refs., 4 figs

Taking a non-conflicting approach to the siting of a deep geological repository or Why introducing the right of 'veto' for the affected municipalities is not a good solution

International Nuclear Information System (INIS)

Handrlica, Jakub

2012-01-01

Various communities, especially ecological initiatives, demand that municipalities affected by planned siting of a Czech deep geological repository for the disposal of spent nuclear fuel and radioactive wastes be given the right to veto such plans. It is shown that the legal tools available to municipalities for defending their legitimate interests within the current siting licensing procedure are sufficient and that the introduction of the right of veto into the Czech law would be a non-conceptual and unprecedented intervention into existing juridical and procedural institutes. (orig.)

Characterization of the liquid argon veto of the GERDA experiment and its application for the measurement of the "7"6Ge half-life

International Nuclear Information System (INIS)

Wegmann, Anne Christin

2017-01-01

The search for neutrinoless double-beta decay (0νββ) is one of the most active fields in modern particle physics as the observation of this process would prove lepton number violation and imply new physics beyond the Standard Model of particle physics. The GERDA experiment searches for this decay by operating bare Germanium detectors, enriched in the ββ isotope "7"6Ge, in liquid argon. For the first time, a ββ-experiment combines the excellent properties of semiconductor Germanium detectors with an active background suppression technique based on the simultaneous detection of liquid argon scintillation light by photomultiplier tubes and silicon photomultipliers coupled to scintillating fibers (LAr veto). The LAr veto has been successfully operated during the first six months of Phase II of the experiment and yielded - in combination with a Germanium detector pulse shape discrimination technique - a background index of (0.7"+"1"."1_-_0_._5).10"-"3 ((cts)/(kg.keV.yr)). With an ultimate exposure of 100 kg.yr this will allow for a 0νββ-decay half-life sensitivity of the Gerda Phase II experiment of 10"2"6 yr. Double-beta decay under the emission of two neutrinos (2νββ) is a second-order process but which is allowed by the Standard Model. The excellent background reduction of the LAr veto results in an unprecedented signal-to-background ratio of 30:1 in the energy region dominated by 2νββ-decay of "7"6Ge. The remaining background after LAr veto is estimated using the suppression factor from calibration source measurements and results in a measurement of T"2"ν_1_/_2=(1.98±0.02(stat)±0.05(syst)).10"2"1 yr and T_1_/_2"2"ν=(1.92 ±0.02(stat)±0.11(syst)).10"2"1 yr based on two different detector designs and give uncertainties on the detector parameters but both with improved systematic uncertainties in comparison to earlier measurements.

Characterization of the liquid argon veto of the GERDA experiment and its application for the measurement of the {sup 76}Ge half-life

Energy Technology Data Exchange (ETDEWEB)

Wegmann, Anne Christin

2017-01-18

The search for neutrinoless double-beta decay (0νββ) is one of the most active fields in modern particle physics as the observation of this process would prove lepton number violation and imply new physics beyond the Standard Model of particle physics. The GERDA experiment searches for this decay by operating bare Germanium detectors, enriched in the ββ isotope {sup 76}Ge, in liquid argon. For the first time, a ββ-experiment combines the excellent properties of semiconductor Germanium detectors with an active background suppression technique based on the simultaneous detection of liquid argon scintillation light by photomultiplier tubes and silicon photomultipliers coupled to scintillating fibers (LAr veto). The LAr veto has been successfully operated during the first six months of Phase II of the experiment and yielded - in combination with a Germanium detector pulse shape discrimination technique - a background index of (0.7{sup +1.1}{sub -0.5}).10{sup -3} ((cts)/(kg.keV.yr)). With an ultimate exposure of 100 kg.yr this will allow for a 0νββ-decay half-life sensitivity of the Gerda Phase II experiment of 10{sup 26} yr. Double-beta decay under the emission of two neutrinos (2νββ) is a second-order process but which is allowed by the Standard Model. The excellent background reduction of the LAr veto results in an unprecedented signal-to-background ratio of 30:1 in the energy region dominated by 2νββ-decay of {sup 76}Ge. The remaining background after LAr veto is estimated using the suppression factor from calibration source measurements and results in a measurement of T{sup 2ν}{sub 1/2}=(1.98±0.02(stat)±0.05(syst)).10{sup 21} yr and T{sub 1/2}{sup 2ν}=(1.92 ±0.02(stat)±0.11(syst)).10{sup 21} yr based on two different detector designs and give uncertainties on the detector parameters but both with improved systematic uncertainties in comparison to earlier measurements.

Vetos y resistencias en el fracaso de la reforma de la planta local en España

Directory of Open Access Journals (Sweden)

Enrique Martínez de la Casa Rodríguez

2016-10-01

Full Text Available La Ley de Racionalización y Sostenibilidad de la Administración Local de 27 de diciembre de 2013 ha sido el último intento legislativo de profunda incidencia sobre la organización de la planta local en España. Una Ley nacida sin consenso y que ha fracasado en sus objetivos. Este artículo quiere hacer, desde el punto de vista de la política un análisis de las causas de ese fracaso. Según indican algunos autores como Alba y Navarro «la literatura más relevante del gobierno local en España proviene de estudiosos del Derecho Administrativo altamente orientada al marco jurídico, la posición jurídica de la unidad local de gobierno y las cuestiones relacionadas con los procedimientos legales». La Ley nace de una necesidad impuesta por la Unión Europea para controlar el déficit de la administración local, nace sin consenso, y fracasa en el intento de reducir la planta local. Este último resultado es del máximo interés porque puede observarse dentro de un marco comparativo entre modelos en Europa. En el marco europeo existen iniciativas de reducción de la planta local que pueden resumirse en dos modelos: arriba-abajo que tiene con característica una norma emanada del legislativo central y aplicada en la esfera local (Dinamarca pero también Grecia y abajo-arriba que fundamenta en la voluntariedad la consecución de la disminución de entes locales (España. Una Ley tan reciente ha encontrado vetos y resistencias por parte de los actores implicados que han hecho imposible su aplicación como consecuencia de enfrentamientos entre el centro y la periferia de la organización institucional española o en el enfrentamiento entre partidos políticos y el poder de veto que tienen actores tan significados como las Comunidades Autónomas y los propios Ayuntamientos objeto de la norma. Vetoes and resistances in the failure of the reform of local tier in Spain Rationalization and Sustainability Law of the local administration from December

39 VetoMed : un système expert à base d'icônes pour la médecine ...

African Journals Online (AJOL)

PR BOKO

Mots-clés: système expert, générateur de systèmes expert, base de connaissances, médecine traditionnelle vétérinaire, plantes médicinales, interface iconique, tradipraticien. Abstract. VetoMed : An icon-based expert system for Traditional Veterinary Medicine. In this paper we propose an expert system in which, icons are ...

Deference to the attorney general? The probability of success of the AG on the direct actions of unconstitutionality

Directory of Open Access Journals (Sweden)

Ivar Alberto Martins Hartmann

2016-01-01

Full Text Available The Brazilian equivalent of the Attorney General, as a brief historical analysis shows, plays an essential role in concentrated constitutional review. However, empirical studies of its performance remain scarce. Our goal is to test the AGs track record in Direct Actions of Unconstitutionality (ADIs at the Brazilian Supreme Court. We use a data set obtained from the Supreme Court in Numbers project’s database in order to run regressions with different models. The hypothesis we tested is that there is no statistically significant relationship between the performance of the AG as plaintiff in concentrated constitutional review and the outcome of the cases. This hypothesis was found to be disproved:  ADIs started by the AG, as well as those proposed by representatives of the Executive branch, have, in fact, greater statistical probability of success.

El derecho de veto en el Consejo de Seguridad de Naciones Unidas: la historia de la válvula de seguridad que paralizó el sistema

Directory of Open Access Journals (Sweden)

María Isabel Torres Cazorla

2008-10-01

Full Text Available Este artículo pretende realizar un análisis del derecho de veto en el Consejo de Seguridad de Naciones Unidas, comenzando por sus orígenes y las razones que motivaron su creación, para estudiar posteriormente el uso y en múltiples ocasiones el que cabría calificar como “abuso” en la utilización de este privilegio por parte de algunos de los miembros permanentes del Consejo de Seguridad. Dado que la mayor parte de los trabajos doctrinales que tratan de esta cuestión datan de hace varias décadas, resulta de sumo interés realizar un análisis del derecho de veto desde que la organización comenzó su andadura, hasta el momento actual.

The NA62 rare Kaon decay experiment Photon Veto System

International Nuclear Information System (INIS)

Perfetto, F.

2009-01-01

The NA62 experiment at CERN SPS is aimed at measuring the rare decay K + →π + νν-bar. This poses very stringent requirements on the particle identification capabilities of the apparatus in order to reject the overwhelming K + →μ + ν and K + →π + π 0 background. In particular, a π 0 rejection at level of 10 -8 is needed to complement the kinematical rejection of π + π 0 events. In order to have a full acceptance from 0 to 50 mrad, partly covered by NA48 liquid Kripton calorimeter, a set of veto anti-counters should be placed along the vacuum decay tank, to catch large angle photons with a detection efficiency better than 10 -4 in a wide energy range: from few hundreds MeV to 35 GeV. Intense R and D programs have been carried out in order to study different technological solutions: a lead-scintillating fibers calorimeter, lead-scintillator sandwich calorimeter and finally an original re-use of the existing barrel of the OPAL lead-glass electromagnetic calorimeter. We present the results on detector performances and compare the three solutions.

Used percentage veto for LIGO and virgo binary inspiral searches

International Nuclear Information System (INIS)

Isogai, Tomoki

2010-01-01

A challenge for ground-based gravitational wave detectors such as LIGO and Virgo is to understand the origin of non-astrophysical transients that contribute to the background noise, obscuring real astrophysically produced signals. To help this effort, there are a number of environmental and instrumental sensors around the site, recording data in 'channels'. We developed a method called the used percentage veto to eliminate corrupted data based on the statistical correlation between transients in the gravitational wave channel and in the auxiliary channels. The results are used to improve inspiral binary searches on LIGO and Virgo data. We also developed a way to apply this method to help find the physical origin of such transients for detector characterization. After identifying statistically correlated channels, a follow-up code clusters coincident events between the gravitational wave channel and auxiliary channels, and thereby classifies noise by correlated channels. For each selected event, the code also gathers and creates information that is helpful for further investigations. The method is contributing to identifying problems and improving data quality for the LIGO S6 and Virgo VSR2 science runs.

Cosmic veto gamma-spectrometry for Comprehensive Nuclear-Test-Ban Treaty samples

International Nuclear Information System (INIS)

Burnett, J.L.; Davies, A.V.

2014-01-01

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a global network of monitoring stations that perform high-resolution gamma-spectrometry on air filter samples for the identification of 85 radionuclides. At the UK CTBT Radionuclide Laboratory (GBL15), a novel cosmic veto gamma-spectrometer has been developed to improve the sensitivity of station measurements, providing a mean background reduction of 80.8% with mean MDA improvements of 45.6%. The CTBT laboratory requirement for a 140 Ba MDA is achievable after 1.5 days counting compared to 5–7 days using conventional systems. The system consists of plastic scintillation plates that detect coincident cosmic-ray interactions within an HPGe gamma-spectrometer using the Canberra Lynx TM multi-channel analyser. The detector is remotely configurable using a TCP/IP interface and requires no dedicated coincidence electronics. It would be especially useful in preventing false-positives at remote station locations (e.g. Halley, Antarctica) where sample transfer to certified laboratories is logistically difficult. The improved sensitivity has been demonstrated for a CTBT air filter sample collected after the Fukushima incident

Cosmic veto gamma-spectrometry for Comprehensive Nuclear-Test-Ban Treaty samples

Science.gov (United States)

Burnett, J. L.; Davies, A. V.

2014-05-01

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a global network of monitoring stations that perform high-resolution gamma-spectrometry on air filter samples for the identification of 85 radionuclides. At the UK CTBT Radionuclide Laboratory (GBL15), a novel cosmic veto gamma-spectrometer has been developed to improve the sensitivity of station measurements, providing a mean background reduction of 80.8% with mean MDA improvements of 45.6%. The CTBT laboratory requirement for a 140Ba MDA is achievable after 1.5 days counting compared to 5-7 days using conventional systems. The system consists of plastic scintillation plates that detect coincident cosmic-ray interactions within an HPGe gamma-spectrometer using the Canberra LynxTM multi-channel analyser. The detector is remotely configurable using a TCP/IP interface and requires no dedicated coincidence electronics. It would be especially useful in preventing false-positives at remote station locations (e.g. Halley, Antarctica) where sample transfer to certified laboratories is logistically difficult. The improved sensitivity has been demonstrated for a CTBT air filter sample collected after the Fukushima incident.

Cosmic veto gamma-spectrometry for Comprehensive Nuclear-Test-Ban Treaty samples

Energy Technology Data Exchange (ETDEWEB)

Burnett, J.L., E-mail: jonathan.burnett@awe.co.uk; Davies, A.V.

2014-05-21

The Comprehensive Nuclear-Test-Ban Treaty (CTBT) is supported by a global network of monitoring stations that perform high-resolution gamma-spectrometry on air filter samples for the identification of 85 radionuclides. At the UK CTBT Radionuclide Laboratory (GBL15), a novel cosmic veto gamma-spectrometer has been developed to improve the sensitivity of station measurements, providing a mean background reduction of 80.8% with mean MDA improvements of 45.6%. The CTBT laboratory requirement for a {sup 140}Ba MDA is achievable after 1.5 days counting compared to 5–7 days using conventional systems. The system consists of plastic scintillation plates that detect coincident cosmic-ray interactions within an HPGe gamma-spectrometer using the Canberra Lynx{sup TM} multi-channel analyser. The detector is remotely configurable using a TCP/IP interface and requires no dedicated coincidence electronics. It would be especially useful in preventing false-positives at remote station locations (e.g. Halley, Antarctica) where sample transfer to certified laboratories is logistically difficult. The improved sensitivity has been demonstrated for a CTBT air filter sample collected after the Fukushima incident.

Negative effects of item repetition on source memory

OpenAIRE

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L.; Johnson, Marcia K.

2012-01-01

In the present study, we explored how item repetition affects source memory for new item–feature associations (picture–location or picture–color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item re...

Conceptual design report for environmental, safety and health phase III FY-91 line item

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-09-01

The Mound Facility (Mound), located in Miamisburg, Ohio, is a Department of Energy (DOE) development and production facility performing support work for DOE`s weapons and energy-related programs. EG&G Mound Applied Technologies (EG&G) is the Operating Contractor (OC) for this Government-Owned, Contractor-Operated (GOCO) facility. The work performed at Mound emphasizes nuclear energy and explosives technology. Mound is currently implementing an Environmental, Safety, and Health (ES&H) Program designed to protect its employees, the public, and the environment from adverse effects caused by the facility`s activities. Design has been completed, and construction is in progress for Phase I of this multiphase program. Phase II has been submitted for fiscal year (FY) 89 funding and Phase IV is being submitted as an FY 92 line item. This Conceptual Design Report (CDR) addresses Phase III of the ES&H program.

On the complaint of unconstitutionality of the Stuttgart Court decisions against non-payers and part payers of electricity bills

International Nuclear Information System (INIS)

Fischerhof, H.

1980-01-01

In a decision dated December 20, 1979, the Federal Constitutional Court refused to accept the complaint of unconstitutionality brought by the Technische Werke (Municipal Utilities) of the city of Stuttgart (TWS) against two decisions by the Stuttgart Municipal Court in favor of non-payers and part payers of electricity bills. The reasons given for the refusal to accept the complaint state that there was every indication of the Stuttgart judgements being faulty. On the basis of this finding, TWS can continue to demand payment in full of their electricity bills. The Federal Constitutional Court maintains that civil rights could not be applied to TWS as a corporation under private law, whose activities exclusively consisted in providing the public with means of existence and whose shares were held in full by an agency with rights of jurisdiction. In a footnote, the author argues that the refusal to grant protection of civil rights to TWS was in conflict with the equal rights principle. (HSCH) [de

Design, simulation and construction of the GERDA-muon veto; Design, Simulation und Aufbau des GERDA-Myonvetos

Energy Technology Data Exchange (ETDEWEB)

Knapp, Markus Alexander

2009-10-09

The GERmanium Detector Array (Gerda) is a experiment searching for the neutrinoless double beta decay of {sup 76}Ge. This very rare weakly interacting process is predicted to occur if the neutrino exhibits a mass and is a Majorana particle; i.e. it is its own antiparticle. Although the double beta decay with emission of two neutrinos has been found in several nuclei, there is at this moment only a part of the Heidelberg-Moscow Collaboration claiming to have observed the neutrinoless double beta decay. The best limit for the half life currently is T{sub 1/2} > 1.2.10{sup 25} y. Gerda will expose about 15 kg.y of enriched germanium detectors from the Heidelberg-Moscow and IGEX crystals in phase I. In this phase, it will be able to test the claim within one year, due to reduced background by a factor 10. In phase II about 100 kg.y of data will be accumulated, leading to T{sub 1/2} > 2.10{sup 26} y due to an additional reduction of the background by a factor of 10. For a high sensitivity at these half lives, it is necessary to detect the corresponding rare events. Therefore background reduction to a rate of 10{sup -3} (counts)/(keV.kg.year) is of utmost importance. Therefore different background identification methods, like pulseshape analysis or a muon veto will be used. In this work, the development of the Cherenkov muon veto detectors is presented. First design studies will be shown, including extensive Monte-Carlo simulations. These simulations were also used to optimize the trigger conditions of the data acquisition, to detect all muons, that cause an energy deposition in the germanium detectors. Finally the on site construction at the Laboratori Nazionali del Gran Sasso in Italy will be described. (orig.)

Dissociating the neural correlates of intra-item and inter-item working-memory binding.

Directory of Open Access Journals (Sweden)

Carinne Piekema

Full Text Available BACKGROUND: Integration of information streams into a unitary representation is an important task of our cognitive system. Within working memory, the medial temporal lobe (MTL has been conceptually linked to the maintenance of bound representations. In a previous fMRI study, we have shown that the MTL is indeed more active during working-memory maintenance of spatial associations as compared to non-spatial associations or single items. There are two explanations for this result, the mere presence of the spatial component activates the MTL, or the MTL is recruited to bind associations between neurally non-overlapping representations. METHODOLOGY/PRINCIPAL FINDINGS: The current fMRI study investigates this issue further by directly comparing intrinsic intra-item binding (object/colour, extrinsic intra-item binding (object/location, and inter-item binding (object/object. The three binding conditions resulted in differential activation of brain regions. Specifically, we show that the MTL is important for establishing extrinsic intra-item associations and inter-item associations, in line with the notion that binding of information processed in different brain regions depends on the MTL. CONCLUSIONS/SIGNIFICANCE: Our findings indicate that different forms of working-memory binding rely on specific neural structures. In addition, these results extend previous reports indicating that the MTL is implicated in working-memory maintenance, challenging the classic distinction between short-term and long-term memory systems.

Defining line replaceable units

NARCIS (Netherlands)

Parada Puig, J. E.; Basten, R. J I

2015-01-01

Defective capital assets may be quickly restored to their operational condition by replacing the item that has failed. The item that is replaced is called the Line Replaceable Unit (LRU), and the so-called LRU definition problem is the problem of deciding on which item to replace upon each type of

Does remembering emotional items impair recall of same-emotion items?

Science.gov (United States)

Sison, Jo Ann G; Mather, Mara

2007-04-01

In the part-set cuing effect, cuing a subset of previously studied items impairs recall of the remaining noncued items. This experiment reveals that cuing participants with previously-studied emotional pictures (e.g., fear-evoking pictures of people) can impair recall of pictures involving the same emotion but different content (e.g., fear-evoking pictures of animals). This indicates that new events can be organized in memory using emotion as a grouping function to create associations. However, whether new information is organized in memory along emotional or nonemotional lines appears to be a flexible process that depends on people's current focus. Mentioning in the instructions that the pictures were either amusement- or fear-related led to memory impairment for pictures with the same emotion as cued pictures, whereas mentioning that the pictures depicted either animals or people led to memory impairment for pictures with the same type of actor.

Negative effects of item repetition on source memory.

Science.gov (United States)

Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L; Johnson, Marcia K

2012-08-01

In the present study, we explored how item repetition affects source memory for new item-feature associations (picture-location or picture-color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item repetition also had a negative effect on source memory when different source dimensions were used in Phases 1 and 2 (Experiment 3) and when participants were explicitly instructed to learn source information in Phase 2 (Experiments 4 and 5). Importantly, when the order between Phases 1 and 2 was reversed, such that item repetition occurred after the encoding of critical item-source combinations, item repetition no longer affected source memory (Experiment 6). Overall, our findings did not support predictions based on item predifferentiation, within-dimension source interference, or general interference from multiple traces of an item. Rather, the findings were consistent with the idea that prior item repetition reduces attention to subsequent presentations of the item, decreasing the likelihood that critical item-source associations will be encoded.

Importance of triggers and veto-barriers for the implementation of sanitation in informal peri-urban settlements – The case of Cochabamba, Bolivia

Science.gov (United States)

Rauch, Sebastien; Cossio, Claudia; Landaeta, Graciela; McConville, Jennifer

2018-01-01

An estimated 2.4 billion people lack access to improved sanitation which has devastating consequences for human health and the environment. Understanding what constitute sanitation demand is crucial for accelerating the spread of improved sanitation. This study aims to understand the adoption mechanisms for improved sanitation. An informal peri-urban settlement in Cochabamba, Bolivia was selected as a case study to understand adoption patterns. Various qualitative methods of data collection and analysis were employed. The findings showed that pour-flush toilets was the only preferred sanitation alternative at the study site. An adoption framework for waterborne toilets was developed based on diffusion of innovation theory. Factors that influence adoption were identified. Some functioned as triggers and initiated adoption, whereas some factors blocked adoption and constituted veto-barriers. Most factors were connected to the individual household situation and its members, but neighborhood development also affected pour-flush adoption. Based on adoption time the residents were divided into the following adoption groups: first adopters, early majority, late majority, laggards and non-adopters. Each adoption group followed its own adoption route with specific characteristics and respective triggers or veto-barriers. We argue that the strong demand for waterborne toilets in peri-urban areas need to be recognized and the developed framework could be used for customizing sanitation improvement programs for certain target groups. PMID:29617459

PhySIC: a veto supertree method with desirable properties.

Science.gov (United States)

Ranwez, Vincent; Berry, Vincent; Criscuolo, Alexis; Fabre, Pierre-Henri; Guillemot, Sylvain; Scornavacca, Celine; Douzery, Emmanuel J P

2007-10-01

This paper focuses on veto supertree methods; i.e., methods that aim at producing a conservative synthesis of the relationships agreed upon by all source trees. We propose desirable properties that a supertree should satisfy in this framework, namely the non-contradiction property (PC) and the induction property (PI). The former requires that the supertree does not contain relationships that contradict one or a combination of the source topologies, whereas the latter requires that all topological information contained in the supertree is present in a source tree or collectively induced by several source trees. We provide simple examples to illustrate their relevance and that allow a comparison with previously advocated properties. We show that these properties can be checked in polynomial time for any given rooted supertree. Moreover, we introduce the PhySIC method (PHYlogenetic Signal with Induction and non-Contradiction). For k input trees spanning a set of n taxa, this method produces a supertree that satisfies the above-mentioned properties in O(kn(3) + n(4)) computing time. The polytomies of the produced supertree are also tagged by labels indicating areas of conflict as well as those with insufficient overlap. As a whole, PhySIC enables the user to quickly summarize consensual information of a set of trees and localize groups of taxa for which the data require consolidation. Lastly, we illustrate the behaviour of PhySIC on primate data sets of various sizes, and propose a supertree covering 95% of all primate extant genera. The PhySIC algorithm is available at http://atgc.lirmm.fr/cgi-bin/PhySIC.

A Charged Particle Veto Wall for the Large Area Neutron Array (LANA)

Science.gov (United States)

Zhu, K.; Chajecki, Z.; Anderson, C.; Bromell, J.; Brown, K.; Crosby, J.; Kodali, S.; Lynch, W. G.; Morfouace, P.; Sweany, S.; Tsang, M. B.; Tsang, C.; Brett, J. J.; Swaim, J. L.

2017-09-01

Comparison of neutrons and protons emitted in heavy ion collisions is one of the observables to probe symmetry energy, which is related to the properties of neutron star. In general, neutrons are difficult to measure and neutron detectors are not as easy to use or as widely available as charged particle detectors. Two neutron walls (NW) called LANA exist at the National Superconducting Cyclotron Laboratory. Although the NSCL NW attains excellent discrimination of γ rays and neutron, it fails to discriminate charged particles from neutrons. To ensure near 100% rejection of charged particles, a Charged Particle Veto Wall (VW) is being jointly built by Michigan State University and Western Michigan University. It will be placed in front of one NW. To increase efficiency in detecting neutrons, the second neutron wall is stacked behind it. In this presentation, I will discuss the design, construction and testing of the VW together with the LANA in preparation of two approved NSCL experiments to probe the density and momentum dependence of the symmetry energy potentials in the equation state of the asymmetric nuclear matter. This material is based upon work supported by the National Science Foundation under Grant No. PHY 1565546.

The CRESST-III iStick veto. Stable operation of multiple transition edge sensors in one readout circuit

Energy Technology Data Exchange (ETDEWEB)

Rothe, Johannes [Max-Planck-Institut f. Physik (Werner-Heisenberg-Institut) (Germany); Ludwig-Maximilians-Universitaet Muenchen (Germany); Collaboration: CRESST-Collaboration

2016-07-01

To enable complete rejection of holder-related events in the upcoming CRESST-III dark matter search experiment, the scintillating target crystals are held by calcium tungstate sticks (iSticks) instrumented with tungsten transition edge sensors (TESs). Since the iStick signals are used exclusively for vetoing, it is sufficient to register if an event happened in any stick, without knowing which one. This allows the operation of all iSticks in a single readout circuit, requiring just one SQUID magnetometer. The talk describes the effect of bias current heating and corresponding hysteresis phenomena known in single-TES circuits, and the resulting conditions for stability in multiple-TES circuits. The fundamentally different behaviour of parallel and series circuits and resulting design choices are explored.

Spare Items validation

International Nuclear Information System (INIS)

Fernandez Carratala, L.

1998-01-01

There is an increasing difficulty for purchasing safety related spare items, with certifications by manufacturers for maintaining the original qualifications of the equipment of destination. The main reasons are, on the top of the logical evolution of technology, applied to the new manufactured components, the quitting of nuclear specific production lines and the evolution of manufacturers quality systems, originally based on nuclear codes and standards, to conventional industry standards. To face this problem, for many years different Dedication processes have been implemented to verify whether a commercial grade element is acceptable to be used in safety related applications. In the same way, due to our particular position regarding the spare part supplies, mainly from markets others than the american, C.N. Trillo has developed a methodology called Spare Items Validation. This methodology, which is originally based on dedication processes, is not a single process but a group of coordinated processes involving engineering, quality and management activities. These are to be performed on the spare item itself, its design control, its fabrication and its supply for allowing its use in destinations with specific requirements. The scope of application is not only focussed on safety related items, but also to complex design, high cost or plant reliability related components. The implementation in C.N. Trillo has been mainly curried out by merging, modifying and making the most of processes and activities which were already being performed in the company. (Author)

INTEGRAL/SPI γ-ray line spectroscopy. Response and background characteristics

Science.gov (United States)

Diehl, Roland; Siegert, Thomas; Greiner, Jochen; Krause, Martin; Kretschmer, Karsten; Lang, Michael; Pleintinger, Moritz; Strong, Andrew W.; Weinberger, Christoph; Zhang, Xiaoling

2018-03-01

Context. The space based γ-ray observatory INTEGRAL of the European Space Agency (ESA) includes the spectrometer instrument "SPI". This is a coded mask telescope featuring a 19-element Germanium detector array for high-resolution γ-ray spectroscopy, encapsulated in a scintillation detector assembly that provides a veto for background from charged particles. In space, cosmic rays irradiate spacecraft and instruments, which, in spite of the vetoing detectors, results in a large instrumental background from activation of those materials, and leads to deterioration of the charge collection properties of the Ge detectors. Aim. We aim to determine the measurement characteristics of our detectors and their evolution with time, that is, their spectral response and instrumental background. These incur systematic variations in the SPI signal from celestial photons, hence their determination from a broad empirical database enables a reduction of underlying systematics in data analysis. For this, we explore compromises balancing temporal and spectral resolution within statistical limitations. Our goal is to enable modelling of background applicable to spectroscopic studies of the sky, accounting separately for changes of the spectral response and of instrumental background. Methods: We use 13.5 years of INTEGRAL/SPI data, which consist of spectra for each detector and for each pointing of the satellite. Spectral fits to each such spectrum, with independent but coherent treatment of continuum and line backgrounds, provides us with details about separated background components. From the strongest background lines, we first determine how the spectral response changes with time. Applying symmetry and long-term stability tests, we eliminate degeneracies and reduce statistical fluctuations of background parameters, with the aim of providing a self-consistent description of the spectral response for each individual detector. Accounting for this, we then determine how the

Park Facilities, Boundaries were determined from parcel mapping lines & site specific items, such as shelter locations, were obtained by field GPS observation, Published in 2010, Not Applicable scale, Chippewa County Government.

Data.gov (United States)

NSGIC Local Govt | GIS Inventory — Park Facilities dataset current as of 2010. Boundaries were determined from parcel mapping lines & site specific items, such as shelter locations, were obtained...

Item-focussed Trees for the Identification of Items in Differential Item Functioning.

Science.gov (United States)

Tutz, Gerhard; Berger, Moritz

2016-09-01

A novel method for the identification of differential item functioning (DIF) by means of recursive partitioning techniques is proposed. We assume an extension of the Rasch model that allows for DIF being induced by an arbitrary number of covariates for each item. Recursive partitioning on the item level results in one tree for each item and leads to simultaneous selection of items and variables that induce DIF. For each item, it is possible to detect groups of subjects with different item difficulties, defined by combinations of characteristics that are not pre-specified. The way a DIF item is determined by covariates is visualized in a small tree and therefore easily accessible. An algorithm is proposed that is based on permutation tests. Various simulation studies, including the comparison with traditional approaches to identify items with DIF, show the applicability and the competitive performance of the method. Two applications illustrate the usefulness and the advantages of the new method.

Performance of a prototype active veto system using liquid scintillator for a dark matter search experiment

Energy Technology Data Exchange (ETDEWEB)

Park, J.S. [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of); Adhikari, P.; Adhikari, G.; Oh, S.Y. [Department of Physics, Sejong University, Seoul 05006 (Korea, Republic of); Kim, N.Y. [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of); Kim, Y.D. [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of); Department of Physics, Sejong University, Seoul 05006 (Korea, Republic of); Ha, C.; Park, K.S. [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of); Lee, H.S., E-mail: hyunsulee@ibs.re.kr [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of); Jeon, E.J. [Center for Underground Physics, Institute for Basic Science (IBS), Daejeon 34047 (Korea, Republic of)

2017-04-11

We report the performance of an active veto system using a liquid scintillator with NaI(Tl) crystals for use in a dark matter search experiment. When a NaI(Tl) crystal is immersed in the prototype detector, the detector tags 48% of the internal {sup 40}K background in the 0–10 keV energy region. We also determined the tagging efficiency for events at 6–20 keV as 26.5±1.7% of the total events, which corresponds to 0.76±0.04 events/keV/kg/day. According to a simulation, approximately 60% of the background events from U, Th, and K radioisotopes in photomultiplier tubes are tagged at energies of 0–10 keV. Full shielding with a 40-cm-thick liquid scintillator can increase the tagging efficiency for both the internal {sup 40}K and external background to approximately 80%.

A METHOD OF SECURITY SCANNING OF CARRY-ON ITEMS, AND A CARRY-ON ITEMS SECURITY SCANNING SYSTEM

DEFF Research Database (Denmark)

2017-01-01

A security scanning system (1) comprises a first stage module (3) having at least one X-ray source (6) and at least three first detectors (7) that are line-shaped and arranged in mutually different orientations and have at least dual energy resolution. A group of carry-on items (4) on a carrier...

The partial-birth stratagem.

Science.gov (United States)

1998-06-01

In Wisconsin, physicians stopped performing abortions when a Federal District Court Judge refused to issue a temporary restraining order against the state's newly enacted "partial birth" abortion ban that was couched in such vague language it actually covered all abortions. While ostensibly attempting to ban late-term "intact dilation and extraction," the language of the law did not refer to that procedure or to late terms. Instead, it prohibited all abortions in which a physician "partially vaginally delivers a living child, causes the death of the partially delivered child with the intent to kill the child and then completes the delivery of the child." The law also defined "child" as "a human being from the time of fertilization" until birth. It is clear that this abortion ban is unconstitutional under Row v. Wade, and this unconstitutionality is compounded by the fact that the law allowed no exception to protect a woman's health, which is required by Roe for abortion bans after fetal viability. Wisconsin is only one of about 28 states that have enacted similar laws, and only two have restricted the ban to postviability abortions. Many of these laws have been struck down in court, and President Clinton has continued to veto the Federal partial-birth bill. The Wisconsin Judge acknowledged that opponents of the ban will likely prevail when the case is heard, but his action in denying the temporary injunction means that many women in Wisconsin will not receive timely medical care. The partial birth strategy is really only another anti-abortion strategy.

Background estimation of cosmic-ray induced neutrons in Chooz site water veto tank for possible future Ricochet Deployment

Science.gov (United States)

Silva, James

2017-09-01

The Ricochet experiment seeks to measure Coherent (neutral-current) Elastic Neutrino-Nucleus Scattering (CE νNS) using metallic superconducting and germanium semi-conducting detectors with sub-keV thresholds placed near a neutrino source such as the Chooz Nuclear Reactor Complex. In this poster, we present an estimate of the flux of cosmic-ray induced neutrons, which represent an important background in any (CE νNS) search, based on reconstructed cosmic ray data from the Chooz Site. We have simulated a possible Ricochet deployment at the Chooz site in GEANT4 focusing on the spallation neutrons generated when cosmic rays interact with the water tank veto that would surround our detector. We further simulate and discuss the effectiveness of various shielding configurations for optimizing the background levels for a future Ricochet deployment.

Directed forgetting of complex pictures in an item method paradigm.

Science.gov (United States)

Hauswald, Anne; Kissler, Johanna

2008-11-01

An item-cued directed forgetting paradigm was used to investigate the ability to control episodic memory and selectively encode complex coloured pictures. A series of photographs was presented to 21 participants who were instructed to either remember or forget each picture after it was presented. Memory performance was later tested with a recognition task where all presented items had to be retrieved, regardless of the initial instructions. A directed forgetting effect--that is, better recognition of "to-be-remembered" than of "to-be-forgotten" pictures--was observed, although its size was smaller than previously reported for words or line drawings. The magnitude of the directed forgetting effect correlated negatively with participants' depression and dissociation scores. The results indicate that, at least in an item method, directed forgetting occurs for complex pictures as well as words and simple line drawings. Furthermore, people with higher levels of dissociative or depressive symptoms exhibit altered memory encoding patterns.

Line-robust statistics for continuous gravitational waves: safety in the case of unequal detector sensitivities

International Nuclear Information System (INIS)

Keitel, David; Prix, Reinhard

2015-01-01

The multi-detector F-statistic is close to optimal for detecting continuous gravitational waves (CWs) in Gaussian noise. However, it is susceptible to false alarms from instrumental artefacts, for example quasi-monochromatic disturbances (‘lines’), which resemble a CW signal more than Gaussian noise. In a recent paper (Keitel et al 2014 Phys. Rev. D 89 064023), a Bayesian model selection approach was used to derive line-robust detection statistics for CW signals, generalizing both the F-statistic and the F-statistic consistency veto technique and yielding improved performance in line-affected data. Here we investigate a generalization of the assumptions made in that paper: if a CW analysis uses data from two or more detectors with very different sensitivities, the line-robust statistics could be less effective. We investigate the boundaries within which they are still safe to use, in comparison with the F-statistic. Tests using synthetic draws show that the optimally-tuned version of the original line-robust statistic remains safe in most cases of practical interest. We also explore a simple idea on further improving the detection power and safety of these statistics, which we, however, find to be of limited practical use. (paper)

Item validity vs. item discrimination index: a redundancy?

Science.gov (United States)

Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.

2018-03-01

In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.

Development and validation of a novel patient-reported treatment satisfaction measure for hyperfunctional facial lines: facial line satisfaction questionnaire.

Science.gov (United States)

Pompilus, Farrah; Burgess, Somali; Hudgens, Stacie; Banderas, Benjamin; Daniels, Selena

2015-12-01

Facial lines or wrinkles are among the most visible signs of aging, and minimally invasive cosmetic procedures are becoming increasingly popular. The aim of this study was to develop and validate the Facial Line Satisfaction Questionnaire (FLSQ) for use in adults with upper facial lines (UFL). A literature review, concept elicitation interviews (n = 33), and cognitive debriefing interviews (n = 23) of adults with UFL were conducted to develop the FLSQ. The FLSQ comprises Baseline and Follow-up versions and was field-tested with 150 subjects in a US observational study designed to assess its psychometric performance. Analyses included acceptability (item and scale distribution [i.e. missingness, floor, and ceiling effects]), reliability, and validity (including concurrent validity). In total, 69 concepts were elicited during patient interviews. Following cognitive debriefing interviews, the FLSQ-Baseline version included 11 items and the Follow-up version included 13 items. Response rates for the FLSQ were 100% and 73% at baseline and follow-up, respectively; no items had excessive missing data. Questionnaire scale scores were normally distributed. Most domain scores demonstrated good internal consistency reliability (Cronbach's α ≥ 0.70). Most items within their respective domains exhibited good convergent (item-scale correlations > 0.40) and discriminant (items had higher correlation with their hypothesized scales than other scales) validity. Concurrent validity correlation coefficients of the FLSQ domain scores with the associated concurrent measures were acceptable (range: r = 0.40-0.70). Six FLSQ items demonstrated reliability and validity as stand-alone items outside their domains. The FLSQ is a valid questionnaire for assessing treatment expectations, satisfaction, impact, and preference in adults with UFL. © 2015 The Authors. Journal of Cosmetic Dermatology Published by Wiley Periodicals, Inc.

Safeguard Application Options for the Laser-Based Item Monitoring System (LBIMS)

International Nuclear Information System (INIS)

Laughter, Mark D

2008-01-01

Researchers at Oak Ridge National Laboratory (ORNL) are developing a Laser-Based Item Monitoring System (LBIMS) for advanced safeguards at nuclear facilities. LBIMS uses a low-power laser transceiver to monitor the presence and position of items with retroreflective tags. The primary advantages of LBIMS are its scalability to continuously monitor a wide range of items, its ability to operate unattended, its low cost of implementation, and its inherent information security due to its line-of-sight and non-broadcasting operation. The primary proposed safeguard application of LBIMS is described in its name: item monitoring. LBIMS could be implemented in a storage area to continuously monitor containers of nuclear material and the area in which they are stored. The system could be configured to provide off-site notification if any of the containers are moved or removed or if the area is accessed. Individual tags would be used to monitor storage containers, and additional tags could be used to record information regarding secondary storage units and room access. The capability to register small changes in tag position opens up the possibility of several other uses. These include continuously monitoring piping arrangements for design information verification or recording equipment positions for other safeguards systems, such as tracking the opening and closing of autoclaves as part of a cylinder tracking system or opening and closing valves on a sample or product take-off line. Combined with attribute tags, which transmit information from any kind of sensor by modulating the laser signal, LBIMS provides the capability to wirelessly and securely collect safeguards data, even in areas where radio-frequency or other wireless communication methods are not practicable. Four application types are described in this report: static item monitoring, in-process item monitoring with trigger tags, multi-layered integration with trigger tags, and line-of-sight data transfer with

Healthy Checkout Lines: A Study in Urban Supermarkets.

Science.gov (United States)

Adjoian, Tamar; Dannefer, Rachel; Willingham, Craig; Brathwaite, Chantelle; Franklin, Sharraine

2017-09-01

To understand the impact of healthy checkouts in Bronx, New York City supermarkets. Consumer purchasing behavior was observed for 2 weeks in 2015. Three supermarkets in the South Bronx. A total of 2,131 adult shoppers (aged ≥18 years) who paid for their groceries at 1 of the selected study checkout lines. Two checkout lines were selected per store; 1 was converted to a healthy checkout and the other remained as it was (standard checkout). Data collectors observed consumer behavior at each line and recorded items purchased from checkout areas. Percentage of customers who purchase items from the checkout area; quantity and price of healthy and unhealthy items purchased from the healthy and standard checkout lines. Measures were analyzed by study condition using chi-square and t tests; significance was determined at α = .05. Only 4.0% of customers bought anything from the checkout area. A higher proportion of customers using the healthy vs standard checkout line bought healthy items (56.5% vs 20.5%; P < .001). When healthier products were available, the proportion of healthy purchases increased. Findings contribute to limited research on effectiveness of healthy checkouts in supermarkets. Similar interventions should expect an increase in healthy purchases from the checkout area, but limited overall impact. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Murdock free recall data: The initial recall search identifies the context by the location of the least remembered item and produces only better remembered items in proportion to the total recall difference.

OpenAIRE

Tarnow, Dr. Eugen

2009-01-01

The curious free recall data of Murdock (1962) shows an additional surprise that seems to have gone undetected until now: the probability of guessing an item in the initial recall is not identical to the overall free recall curve. Initial recall of an item is well correlated with the total recall of that item using a straight line but with an unexpected offset. The offset varies with the presentation rate and the total number of list items but in each case it is the same as the total recall ...

CHANTI: a fast and efficient charged particle veto detector for the NA62 experiment at cern

CERN Document Server

Mirra, Marco

This work has been performed into the frame of the NA62 experiment at CERN that aims at measuring the Branching-Ratio of the ultra-rare kaon decay K+→π+ nu nubar with 10% uncertainty - using an unseparated kaon beam of 75GeV/c - in order to test the Standard Model (SM), to look for physics beyond SM and to measure the |Vtd| element of the Cabibbo-Kobayashi-Maskawa (CKM) flavor mixing matrix. Backgrounds, which are up to 10^10 times higher than the signal, will be suppressed by an accurate measurement of the momentum of the K+ (with a silicon beam tracker named GigaTracker) and the π+ (with a straw tracker) and by a complex system of particle identification and veto detectors. A critical background can be induced by inelastic interactions of the hadron beam with the GigaTracker. Pions produced in these interactions, emitted at low angle, can reach the straw tracker and mimic a kaon decay in the fiducial region, if no other track is detected. In order to suppress this background a CHarged track ANTIcounter ...

Using automatic item generation to create multiple-choice test items.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis; Turner, Simon R

2012-08-01

Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

LLW Notes, Volume 12, Number 7

International Nuclear Information System (INIS)

Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

1997-09-01

Contents include articles entitled: House votes 309 to 107 to approve Texas compact; Nebraska governor hosts LLRW meeting; Southeast Compact considers funding proposal; Chem-Nuclear explores options re SC revenue requirements; Legislation sets revenue requirements for Barnwell; TCC meets: Supports CA request for technical assistance; DOE approves part of California's technical assistance request; State legislators discuss LLRW management for OH, IL, NC; Washington governor re Potential New Hanford Role; Federal court enjoins DOE from excluding WCS on new disposal; Appellate court in favor of DOE in surcharge rebates dispute; Hearing set for October in Ward Valley case; court rejects federal motion to dismiss Ward Valley suit; NE sues commission re veto over export authorizations; US Supreme Court dismisses line-item veto challenge; Department of Interior Inspector General investigation requested; USEC privatization plan approved; DOD finalizes LLRW disposal charter; Clinton nominates six DOE appointees; Congress moves FUSRAP to Army Corps of Engineers; Schaefer named interim director of USGS: Nichols leaves EPA: NRC Commissioner Rogers' term expires; NRC: CA ''Well-Quantified'' to license Ward Valley facility; EPA objects to state permit for Louisiana facility; Petitions submitted to EPA oppose Shintech permits; ECOS draft recommendations re Enviro programs; Legislation introduced to prohibit spent fuel shipments to the Goshutes; and HLW legislation ready for floor action

LLW Notes, Volume 12, Number 7

Energy Technology Data Exchange (ETDEWEB)

Norris, C.; Brown, H. [eds.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

1997-09-01

Contents include articles entitled: House votes 309 to 107 to approve Texas compact; Nebraska governor hosts LLRW meeting; Southeast Compact considers funding proposal; Chem-Nuclear explores options re SC revenue requirements; Legislation sets revenue requirements for Barnwell; TCC meets: Supports CA request for technical assistance; DOE approves part of California`s technical assistance request; State legislators discuss LLRW management for OH, IL, NC; Washington governor re Potential New Hanford Role; Federal court enjoins DOE from excluding WCS on new disposal; Appellate court in favor of DOE in surcharge rebates dispute; Hearing set for October in Ward Valley case; court rejects federal motion to dismiss Ward Valley suit; NE sues commission re veto over export authorizations; US Supreme Court dismisses line-item veto challenge; Department of Interior Inspector General investigation requested; USEC privatization plan approved; DOD finalizes LLRW disposal charter; Clinton nominates six DOE appointees; Congress moves FUSRAP to Army Corps of Engineers; Schaefer named interim director of USGS: Nichols leaves EPA: NRC Commissioner Rogers` term expires; NRC: CA ``Well-Quantified`` to license Ward Valley facility; EPA objects to state permit for Louisiana facility; Petitions submitted to EPA oppose Shintech permits; ECOS draft recommendations re Enviro programs; Legislation introduced to prohibit spent fuel shipments to the Goshutes; and HLW legislation ready for floor action.

The Role of Item Models in Automatic Item Generation

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2012-01-01

Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

Science.gov (United States)

Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

2013-07-01

Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

Problems with the factor analysis of items: Solutions based on item response theory and item parcelling

Directory of Open Access Journals (Sweden)

Gideon P. De Bruin

2004-10-01

Full Text Available The factor analysis of items often produces spurious results in the sense that unidimensional scales appear multidimensional. This may be ascribed to failure in meeting the assumptions of linearity and normality on which factor analysis is based. Item response theory is explicitly designed for the modelling of the non-linear relations between ordinal variables and provides a strong alternative to the factor analysis of items. Items may also be combined in parcels that are more likely to satisfy the assumptions of factor analysis than do the items. The use of the Rasch rating scale model and the factor analysis of parcels is illustrated with data obtained with the Locus of Control Inventory. The results of these analyses are compared with the results obtained through the factor analysis of items. It is shown that the Rasch rating scale model and the factoring of parcels produce superior results to the factor analysis of items. Recommendations for the analysis of scales are made. Opsomming Die faktorontleding van items lewer dikwels misleidende resultate op, veral in die opsig dat eendimensionele skale as meerdimensioneel voorkom. Hierdie resultate kan dikwels daaraan toegeskryf word dat daar nie aan die aannames van lineariteit en normaliteit waarop faktorontleding berus, voldoen word nie. Itemresponsteorie, wat eksplisiet vir die modellering van die nie-liniêre verbande tussen ordinale items ontwerp is, bied ’n aantreklike alternatief vir die faktorontleding van items. Items kan ook in pakkies gegroepeer word wat meer waarskynlik aan die aannames van faktorontleding voldoen as individuele items. Die gebruik van die Rasch beoordelingskaalmodel en die faktorontleding van pakkies word aan die hand van data wat met die Lokus van Beheervraelys verkry is, gedemonstreer. Die resultate van hierdie ontledings word vergelyk met die resultate wat deur ‘n faktorontleding van die individuele items verkry is. Die resultate dui daarop dat die Rasch

Item information and discrimination functions for trinary PCM items

NARCIS (Netherlands)

Akkermans, Wies; Muraki, Eiji

1997-01-01

For trinary partial credit items the shape of the item information and the item discrimination function is examined in relation to the item parameters. In particular, it is shown that these functions are unimodal if δ2 – δ1 < 4 ln 2 and bimodal otherwise. The locations and values of the maxima are

Item level diagnostics and model - data fit in item response theory ...

African Journals Online (AJOL)

Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

Scientific criticism of “DNA criminal investigation – DNA database, mandatory DNA collection and time limit for data retention” - Notes on the unconstitutionality of Law 12.654/2012

Directory of Open Access Journals (Sweden)

Rodrigo Grazinoli Garrido

2018-06-01

Full Text Available This scientific criticism was based on what was proposed by the article “DNA criminal investigation – DNA database, mandatory DNA collection and time limit for data retention” - Notes on the unconstitutionality of Law 12.654/2012”, in the search to offer doctrinal and empirical evidences that allowed to expand the academic dialogue on the implantation of the National Database of Genetic Profiles (BNPG. For that, we conducted exploratory and qualitative research, developed from documentation of doctrine, empirical work, judgments and rules related to the Brazilian and foreign databases. It is possible to recognize the possibility of using different references from the one presented by the article in question and, thus, the scope of contrary conclusions, particularly regarding the offense to the principle nemo tenetur is detegere in the application of Law 12,654 / 2012. Furthermore, important limitations in relation to the reduction of crime rates and the increase in DNA databases need to be emphasized.

W-Tagging/B-Veto in SUSY search for squarks and gluinos in final states with missing transverse energy, jets, and one isolated lepton at ATLAS

CERN Document Server

Reyer, Max

2015-01-01

This report recapitulates my stay at CERN as a Summer Student in a 13-week period from June 29 to September 25 in 2015. During that time, I was part of the CERN ATLAS Supersymmetry working group and working on a project exploiting W-tagging and B-veto techniques for the search for squarks and gluinos in final states with missing transverse energy, jets, and one isolated lepton. In this report, I will summarize my project and present results and conclusions. Apart from that, I will also write about my experience with the Summer Student lectures, the social aspects and the CERN Summer School in general.

LLW Notes, Volume 12, Number 5

International Nuclear Information System (INIS)

Norris, C.; Brown, H.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

1997-06-01

Contents include articles entitled: USGS report supports previous conclusions re tritium migration at Beatty; Ohio selects new contractor for screening; Maine Yankee's future uncertain; Southeast Compact limits funds for North Carolina project; California, Energy, and Interior exchange correspondence on Ward Valley testing; TCC meets in Salt Lake City, Utah; Garner named executive director and forum participant for Northwest Compact; Seventh Circuit upholds Energy Secretary's determination re distribution of surcharge rebates; US Ecology sues Nebraska re wetlands mitigation; US Supreme Court hears line-item veto challenge; Court rules NAS must provide public access; WCS sues Envirocare of Texas; DOE and Envirocare sign consent agreement; NRC issues performance assessment guidance; NRC to publish final decommissioning rule; House subcommittee passes Texas Consent Act; Environmental justice bill introduced in the House; and International nuclear safety body established

LLW Notes, Volume 12, Number 5

Energy Technology Data Exchange (ETDEWEB)

Norris, C.; Brown, H. [eds.; Gedden, R.; Lovinger, T.; Scheele, L.; Shaker, M.A.

1997-06-01

Contents include articles entitled: USGS report supports previous conclusions re tritium migration at Beatty; Ohio selects new contractor for screening; Maine Yankee`s future uncertain; Southeast Compact limits funds for North Carolina project; California, Energy, and Interior exchange correspondence on Ward Valley testing; TCC meets in Salt Lake City, Utah; Garner named executive director and forum participant for Northwest Compact; Seventh Circuit upholds Energy Secretary`s determination re distribution of surcharge rebates; US Ecology sues Nebraska re wetlands mitigation; US Supreme Court hears line-item veto challenge; Court rules NAS must provide public access; WCS sues Envirocare of Texas; DOE and Envirocare sign consent agreement; NRC issues performance assessment guidance; NRC to publish final decommissioning rule; House subcommittee passes Texas Consent Act; Environmental justice bill introduced in the House; and International nuclear safety body established.

A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

Science.gov (United States)

Fukuhara, Hirotaka; Kamata, Akihito

2011-01-01

A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

Gender-Based Differential Item Performance in Mathematics Achievement Items.

Science.gov (United States)

Doolittle, Allen E.; Cleary, T. Anne

1987-01-01

Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM). Signed measures of differential item performance (DIP) were obtained for each item in the eight ACTM forms. DIP estimates were analyzed and a significant item category effect was found. (Author/LMO)

Evaluation of psychometric properties and differential item functioning of 8-item Child Perceptions Questionnaires using item response theory.

Science.gov (United States)

Yau, David T W; Wong, May C M; Lam, K F; McGrath, Colman

2015-08-19

Four-factor structure of the two 8-item short forms of Child Perceptions Questionnaire CPQ11-14 (RSF:8 and ISF:8) has been confirmed. However, the sum scores are typically reported in practice as a proxy of Oral health-related Quality of Life (OHRQoL), which implied a unidimensional structure. This study first assessed the unidimensionality of 8-item short forms of CPQ11-14. Item response theory (IRT) was employed to offer an alternative and complementary approach of validation and to overcome the limitations of classical test theory assumptions. A random sample of 649 12-year-old school children in Hong Kong was analyzed. Unidimensionality of the scale was tested by confirmatory factor analysis (CFA), principle component analysis (PCA) and local dependency (LD) statistic. Graded response model was fitted to the data. Contribution of each item to the scale was assessed by item information function (IIF). Reliability of the scale was assessed by test information function (TIF). Differential item functioning (DIF) across gender was identified by Wald test and expected score functions. Both CPQ11-14 RSF:8 and ISF:8 did not deviate much from the unidimensionality assumption. Results from CFA indicated acceptable fit of the one-factor model. PCA indicated that the first principle component explained >30 % of the total variation with high factor loadings for both RSF:8 and ISF:8. Almost all LD statistic items suggesting little contribution of information to the scale and item removal caused little practical impact. Comparing the TIFs, RSF:8 showed slightly better information than ISF:8. In addition to oral symptoms items, the item "Concerned with what other people think" demonstrated a uniform DIF (p Items related to oral symptoms were not informative to OHRQoL and deletion of these items is suggested. The impact of DIF across gender on the overall score was minimal. CPQ11-14 RSF:8 performed slightly better than ISF:8 in measurement precision. The 6-item short forms

Exploring differential item functioning (DIF) with the Rasch model: A comparison of gender differences on eighth-grade science items in the United States and Spain

Science.gov (United States)

Calvert, Tasha

Despite the attention that has been given to gender and science, boys continue to outperform girls in science achievement, particularly by the end of secondary school. Because it is unclear whether gender differences have narrowed over time (Leder, 1992; Willingham & Cole, 1997), it is important to continue a line of inquiry into the nature of gender differences, specifically at the international level. The purpose of this study was to investigate gender differences in science achievement across two countries: United States and Spain. A secondary purpose was to demonstrate an alternative method for exploring gender differences based on the many-faceted Rasch model (1980). A secondary analysis of the data from the Third International Mathematics and Science Study (TIMSS) was used to examine the relationship between gender DIF (differential item functioning) and item characteristics (item type, content, and performance expectation) across both countries. Nationally representative samples of eighth grade students in the United States and Spain who participated in TIMSS were analyzed to answer the research questions in this study. In both countries, girls showed an advantage over boys on life science items and most extended response items, whereas boys, by and large, had an advantage on earth science, physics, and chemistry items. However, even within areas that favored boys, such as physics, there were items that were differentially easier for girls. In general, patterns in gender differences were similar across both countries although there were a few differences between the countries on individual items. It was concluded that simply looking at mean differences does not provide an adequate understanding of the nature of gender differences in science achievement.

Are LMFBR permits unconstitutional. [German Feferal Republic

Energy Technology Data Exchange (ETDEWEB)

Wagner, H; Ziegler, E

1977-12-01

The August 18, 1977 decision by the Muenster Higher Administrative Court to have the Federal Constitutional Court investigate the constitutionality of permits granted for fast breeder power plants has aroused much attention, both in the FRG and in other countries. This is the first time that the German Atomic Energy Act is being questioned with respect to the separation of powers between legislative and executive authorities and also with respect to the principle of a constitutional state. As a result of their analysis of the first information available about the court decision the authors have some doubts as to whether the views held by the court about the consequences of the development of fast breeder reactors and of the permit granted for the SNR 300 demonstration nuclear power station are essentially correct. In view of the wording of and the official comments on the incriminated Section 7 of the Atomic Energy Act and the large number of subsequent leading decisions by the Federal Diet about fast breeder reactors also the concern about the constitutionality of that reactor line appears to be unfounded.

The unconstitutionality of the compensatory fee according to section 8 of the Third Act on Enhanced Use of Coal for Electricity Generation ('Coal Pfennig'). Federal Constitutional Court, judgment of 11 Oct. 1994 - 2BvR 633/86

International Nuclear Information System (INIS)

Haager, K.; Lauffer, P.

1995-01-01

In order to protect the financial system of the federation as well as the appropriations power of the Bundestag from interference, and in order to account for the requirement of individual protection of the tax payers with regard to equality of burdens, a special levy shall be permitted by constitutional law only under very stringent conditions, and in very exceptional cases. The compensatory fee according to section 8 of the Third Act on Enhanced Use of Coal for Electricity Generation ('Coal Pfennig') thus is unconstitutional, as it puts an additional burden on the body of tax payers who as such do not bear responsibility for the financing of the purpose, to subsidise the use of coal for electricity generation. (orig.) [de

Mechanism Design for the Online Allocation of Items without Monetary Payments

NARCIS (Netherlands)

Jalilzadeh, B.; Planken, L.; De Weerdt, M.M.

2010-01-01

We consider online mechanism design without money, where agents are allowed to trade items with other agents, in an attempt to improve their own allocation. In an off-line context, this problem is known as the House Allocation Problem (HAP). We extend HAP to an online problem and call it the Online

Evaluation of item candidates for a diabetic retinopathy quality of life item bank.

Science.gov (United States)

Fenwick, Eva K; Pesudovs, Konrad; Khadka, Jyoti; Rees, Gwyn; Wong, Tien Y; Lamoureux, Ecosse L

2013-09-01

We are developing an item bank assessing the impact of diabetic retinopathy (DR) on quality of life (QoL) using a rigorous multi-staged process combining qualitative and quantitative methods. We describe here the first two qualitative phases: content development and item evaluation. After a comprehensive literature review, items were generated from four sources: (1) 34 previously validated patient-reported outcome measures; (2) five published qualitative articles; (3) eight focus groups and 18 semi-structured interviews with 57 DR patients; and (4) seven semi-structured interviews with diabetes or ophthalmic experts. Items were then evaluated during 3 stages, namely binning (grouping) and winnowing (reduction) based on key criteria and panel consensus; development of item stems and response options; and pre-testing of items via cognitive interviews with patients. The content development phase yielded 1,165 unique items across 7 QoL domains. After 3 sessions of binning and winnowing, items were reduced to a minimally representative set (n = 312) across 9 domains of QoL: visual symptoms; ocular surface symptoms; activity limitation; mobility; emotional; health concerns; social; convenience; and economic. After 8 cognitive interviews, 42 items were amended resulting in a final set of 314 items. We have employed a systematic approach to develop items for a DR-specific QoL item bank. The psychometric properties of the nine QoL subscales will be assessed using Rasch analysis. The resulting validated item bank will allow clinicians and researchers to better understand the QoL impact of DR and DR therapies from the patient's perspective.

The role of attention in item-item binding in visual working memory.

Science.gov (United States)

Peterson, Dwight J; Naveh-Benjamin, Moshe

2017-09-01

An important yet unresolved question regarding visual working memory (VWM) relates to whether or not binding processes within VWM require additional attentional resources compared with processing solely the individual components comprising these bindings. Previous findings indicate that binding of surface features (e.g., colored shapes) within VWM is not demanding of resources beyond what is required for single features. However, it is possible that other types of binding, such as the binding of complex, distinct items (e.g., faces and scenes), in VWM may require additional resources. In 3 experiments, we examined VWM item-item binding performance under no load, articulatory suppression, and backward counting using a modified change detection task. Binding performance declined to a greater extent than single-item performance under higher compared with lower levels of concurrent load. The findings from each of these experiments indicate that processing item-item bindings within VWM requires a greater amount of attentional resources compared with single items. These findings also highlight an important distinction between the role of attention in item-item binding within VWM and previous studies of long-term memory (LTM) where declines in single-item and binding test performance are similar under divided attention. The current findings provide novel evidence that the specific type of binding is an important determining factor regarding whether or not VWM binding processes require attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Differential item functioning magnitude and impact measures from item response theory models.

Science.gov (United States)

Kleinman, Marjorie; Teresi, Jeanne A

2016-01-01

Measures of magnitude and impact of differential item functioning (DIF) at the item and scale level, respectively are presented and reviewed in this paper. Most measures are based on item response theory models. Magnitude refers to item level effect sizes, whereas impact refers to differences between groups at the scale score level. Reviewed are magnitude measures based on group differences in the expected item scores and impact measures based on differences in the expected scale scores. The similarities among these indices are demonstrated. Various software packages are described that provide magnitude and impact measures, and new software presented that computes all of the available statistics conveniently in one program with explanations of their relationships to one another.

ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

African Journals Online (AJOL)

Global Journal

Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

Straight-Line: A nuclear material storage information management system

International Nuclear Information System (INIS)

Nilsen, C.; Mangan, D.

1995-01-01

Sandia National Laboratories is developing Straight-Line -- a pilot system to demonstrate comprehensive monitoring of nuclear material in storage. Straight-Line is an integrated system of sensors providing information that will enhance the safety, security, and international accountability of stored nuclear material. The goals of this effort are to: (1) Provide the right sensor information to the right user immediately. (2) Reduce the expenses, risks, and frequency of human inspection of the material. (3) Provide trustworthy data to international inspectors to minimize their need to make on site inspections. In pursuit of these goals, Straight-Line unites technology from Sandia's Authenticated Item Monitoring System (AIMS) and other programs to communicate the authenticated status of the monitored item back to central magazine receivers. Straight-Line, however, incorporates several important features not found in previous systems: (1) Information Security -- the ability to collect and safely disseminate both classified and unclassified sensor data to users on a need-to-know basis. (2) Integrate into a single system the monitoring needs of safety, security, and international accountability. (3) Incorporate the use of sensors providing analog or digital output. This paper will present the overall architecture and status of the Straight-Line project

Straight-Line: A nuclear material storage information management system

Energy Technology Data Exchange (ETDEWEB)

Nilsen, C.; Mangan, D.

1995-07-01

Sandia National Laboratories is developing Straight-Line -- a pilot system to demonstrate comprehensive monitoring of nuclear material in storage. Straight-Line is an integrated system of sensors providing information that will enhance the safety, security, and international accountability of stored nuclear material. The goals of this effort are to: (1) Provide the right sensor information to the right user immediately. (2) Reduce the expenses, risks, and frequency of human inspection of the material. (3) Provide trustworthy data to international inspectors to minimize their need to make on site inspections. In pursuit of these goals, Straight-Line unites technology from Sandia`s Authenticated Item Monitoring System (AIMS) and other programs to communicate the authenticated status of the monitored item back to central magazine receivers. Straight-Line, however, incorporates several important features not found in previous systems: (1) Information Security -- the ability to collect and safely disseminate both classified and unclassified sensor data to users on a need-to-know basis. (2) Integrate into a single system the monitoring needs of safety, security, and international accountability. (3) Incorporate the use of sensors providing analog or digital output. This paper will present the overall architecture and status of the Straight-Line project.

Evolution of a Test Item

Science.gov (United States)

Spaan, Mary

2007-01-01

This article follows the development of test items (see "Language Assessment Quarterly", Volume 3 Issue 1, pp. 71-79 for the article "Test and Item Specifications Development"), beginning with a review of test and item specifications, then proceeding to writing and editing of items, pretesting and analysis, and finally selection of an item for a…

Working memory for sequences of temporal durations reveals a volatile single-item store

Directory of Open Access Journals (Sweden)

Sanjay G Manohar

2016-10-01

Full Text Available When a sequence is held in working memory, different items are retained with differing fidelity. Here we ask whether a sequence of brief time intervals that must be remembered show recency effects, similar to those observed in verbal and visuospatial working memory. It has been suggested that prioritising some items over others can be accounted for by a focus of attention, maintaining some items in a privileged state. We therefore also investigated whether such benefits are vulnerable to disruption by attention or expectation. Participants listened to sequences of one to five tones, of varying durations (200ms to 2s. Subsequently, the length of one of the tones in the sequence had to be reproduced by holding a key. The discrepancy between the reproduced and actual durations quantified the fidelity of memory for auditory durations. Recall precision decreased with the number of items that had to be remembered, and was better for the first and last items of sequences, in line with set-size and serial position effects seen in other modalities. To test whether attentional filtering demands might impair performance, an irrelevant variation in pitch was introduced in some blocks of trials. In those blocks, memory precision was worse for sequences that consisted of only one item, i.e. the smallest memory set size. Thus, when irrelevant information was present, the benefit of having only one item in memory is attenuated. Finally we examined whether expectation could interfere with memory. On half the trials, the number of items in the upcoming sequence was cued. When the number of items was known in advance, performance was paradoxically worse when the sequence consisted of only one item. Thus the benefit of having only one item to remember is stronger when it is unexpectedly the only item. Our results suggest that similar mechanisms are used to hold auditory time durations in working memory, as for visual or verbal stimuli. Further, solitary items were

Immunogenicity and immunomodulatory properties of umbilical cord lining mesenchymal stem cells.

Science.gov (United States)

Deuse, Tobias; Stubbendorff, Mandy; Tang-Quan, Karis; Phillips, Neil; Kay, Mark A; Eiermann, Thomas; Phan, Thang T; Volk, Hans-Dieter; Reichenspurner, Hermann; Robbins, Robert C; Schrepfer, Sonja

2011-01-01

We here present an immunologic head-to-head comparison between human umbilical cord lining mesenchymal stem cells (clMSCs) and adult bone marrow MSCs (bmMSCs) from patients >65 years of age. clMSCs had significantly lower HLA class I expression, higher production of tolerogenic TGF-β and IL-10, and showed significantly faster proliferation. In vitro activation of allogeneic lymphocytes and xenogeneic in vivo immune activation was significantly stronger with bmMSCs, whereas immune recognition of clMSCs was significantly weaker. Thus, bmMSCs were more quickly rejected in immunocompetent mice. IFN-γ at 25 ng/ml increased both immunogenicity by upregulation of HLA class I/ HLA-DR expression and tolerogenicity by increasing intracellular HLA-G and surface HLA-E expression, augmenting TGF-β and IL-10 release, and inducing indoleamine 2,3-dioxygenase (IDO) expression. Higher concentrations of IFN-γ (>50 ng/ml) further enhanced the immunosuppressive phenotype of clMSCs, more strongly downregulating HLA-DR expression and further increasing IDO production (at 500 ng/ml). The net functional immunosuppressive efficacy of MSCs was tested in mixed lymphocyte cultures. Although both clMSCs and bmMSCs significantly reduced in vitro immune activation, clMSCs were significantly more effective than bmMSCs. The veto function of both MSC lines was enhanced in escalating IFN-γ environments. In conclusion, clMSCs show a more beneficial immunogeneic profile and stronger overall immunosuppressive potential than aged bmMSCs.

Instructional Topics in Educational Measurement (ITEMS) Module: Using Automated Processes to Generate Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis

2013-01-01

Changes to the design and development of our educational assessments are resulting in the unprecedented demand for a large and continuous supply of content-specific test items. One way to address this growing demand is with automatic item generation (AIG). AIG is the process of using item models to generate test items with the aid of computer…

A 67-Item Stress Resilience item bank showing high content validity was developed in a psychosomatic sample.

Science.gov (United States)

Obbarius, Nina; Fischer, Felix; Obbarius, Alexander; Nolte, Sandra; Liegl, Gregor; Rose, Matthias

2018-04-10

To develop the first item bank to measure Stress Resilience (SR) in clinical populations. Qualitative item development resulted in an initial pool of 131 items covering a broad theoretical SR concept. These items were tested in n=521 patients at a psychosomatic outpatient clinic. Exploratory and Confirmatory Factor Analysis (CFA), as well as other state-of-the-art item analyses and IRT were used for item evaluation and calibration of the final item bank. Out of the initial item pool of 131 items, we excluded 64 items (54 factor loading .3, 2 non-discriminative Item Response Curves, 4 Differential Item Functioning). The final set of 67 items indicated sufficient model fit in CFA and IRT analyses. Additionally, a 10-item short form with high measurement precision (SE≤.32 in a theta range between -1.8 and +1.5) was derived. Both the SR item bank and the SR short form were highly correlated with an existing static legacy tool (Connor-Davidson Resilience Scale). The final SR item bank and 10-item short form showed good psychometric properties. When further validated, they will be ready to be used within a framework of Computer-Adaptive Tests for a comprehensive assessment of the Stress-Construct. Copyright © 2018. Published by Elsevier Inc.

Teoria da Resposta ao Item Teoria de la respuesta al item Item response theory

Directory of Open Access Journals (Sweden)

Eutalia Aparecida Candido de Araujo

2009-12-01

Full Text Available A preocupação com medidas de traços psicológicos é antiga, sendo que muitos estudos e propostas de métodos foram desenvolvidos no sentido de alcançar este objetivo. Entre os trabalhos propostos, destaca-se a Teoria da Resposta ao Item (TRI que, a princípio, veio completar limitações da Teoria Clássica de Medidas, empregada em larga escala até hoje na medida de traços psicológicos. O ponto principal da TRI é que ela leva em consideração o item particularmente, sem relevar os escores totais; portanto, as conclusões não dependem apenas do teste ou questionário, mas de cada item que o compõe. Este artigo propõe-se a apresentar esta Teoria que revolucionou a teoria de medidas.La preocupación con las medidas de los rasgos psicológicos es antigua y muchos estudios y propuestas de métodos fueron desarrollados para lograr este objetivo. Entre estas propuestas de trabajo se incluye la Teoría de la Respuesta al Ítem (TRI que, en principio, vino a completar las limitaciones de la Teoría Clásica de los Tests, ampliamente utilizada hasta hoy en la medida de los rasgos psicológicos. El punto principal de la TRI es que se tiene en cuenta el punto concreto, sin relevar las puntuaciones totales; por lo tanto, los resultados no sólo dependen de la prueba o cuestionario, sino que de cada ítem que lo compone. En este artículo se propone presentar la Teoría que revolucionó la teoría de medidas.The concern with measures of psychological traits is old and many studies and proposals of methods were developed to achieve this goal. Among these proposed methods highlights the Item Response Theory (IRT that, in principle, came to complete limitations of the Classical Test Theory, which is widely used until nowadays in the measurement of psychological traits. The main point of IRT is that it takes into account the item in particular, not relieving the total scores; therefore, the findings do not only depend on the test or questionnaire

Computerized Adaptive Test (CAT) Applications and Item Response Theory Models for Polytomous Items

Science.gov (United States)

Aybek, Eren Can; Demirtasli, R. Nukhet

2017-01-01

This article aims to provide a theoretical framework for computerized adaptive tests (CAT) and item response theory models for polytomous items. Besides that, it aims to introduce the simulation and live CAT software to the related researchers. Computerized adaptive test algorithm, assumptions of item response theory models, nominal response…

Language-related differential item functioning between English and German PROMIS Depression items is negligible.

Science.gov (United States)

Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

2017-12-01

To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

Straight-Line -- A nuclear material storage information management system

International Nuclear Information System (INIS)

Nilsen, C.; Mangan, D.

1995-01-01

Sandia National Laboratories is developing Straight-Line -- a pilot system to demonstrate comprehensive monitoring of nuclear material in storage. Straight-Line is an integrated system of sensors providing information that will enhance the safety, security, and international accountability of stored nuclear material. The goals of this effort are to (1) Provide the right sensor information to the right user in a timely manner. (2) Reduce the expenses, risks, and frequency of human inspection of the material. (3) Provide trustworthy data to international inspectors to minimize their need to make on site inspections. In pursuit of these goals, Straight-Line unites technology from Sandia's Authenticated Item Monitoring System (AIMS) and other programs to communicate the authenticated status of the monitored item back to central magazine receivers. Straight-Line, however, incorporates several important features not found in previous systems: (1) Information Security -- the ability to collect and safely disseminate both classified and unclassified sensor data to users on a need-to-know basis. (2) Integrate into a single system the monitoring needs of safety, security, and international accountability. (3) Incorporate the use of sensors providing analog or digital output. This paper will present the overall architecture and status of the Straight-Line project

Straight-Line -- A nuclear material storage information management system

Energy Technology Data Exchange (ETDEWEB)

Nilsen, C. [Sandia National Labs., Livermore, CA (United States); Mangan, D. [Sandia National Labs., Albuquerque, NM (United States)

1995-12-31

Sandia National Laboratories is developing Straight-Line -- a pilot system to demonstrate comprehensive monitoring of nuclear material in storage. Straight-Line is an integrated system of sensors providing information that will enhance the safety, security, and international accountability of stored nuclear material. The goals of this effort are to (1) Provide the right sensor information to the right user in a timely manner. (2) Reduce the expenses, risks, and frequency of human inspection of the material. (3) Provide trustworthy data to international inspectors to minimize their need to make on site inspections. In pursuit of these goals, Straight-Line unites technology from Sandia`s Authenticated Item Monitoring System (AIMS) and other programs to communicate the authenticated status of the monitored item back to central magazine receivers. Straight-Line, however, incorporates several important features not found in previous systems: (1) Information Security -- the ability to collect and safely disseminate both classified and unclassified sensor data to users on a need-to-know basis. (2) Integrate into a single system the monitoring needs of safety, security, and international accountability. (3) Incorporate the use of sensors providing analog or digital output. This paper will present the overall architecture and status of the Straight-Line project.

Effects of data quality vetoes on a search for compact binary coalescences in Advanced LIGO’s first observing run

Science.gov (United States)

Abbott, B. P.; Abbott, R.; Abbott, T. D.; Abernathy, M. R.; Acernese, F.; Ackley, K.; Adams, C.; Adams, T.; Addesso, P.; Adhikari, R. X.; Adya, V. B.; Affeldt, C.; Agathos, M.; Agatsuma, K.; Aggarwal, N.; Aguiar, O. D.; Aiello, L.; Ain, A.; Allen, B.; Allocca, A.; Altin, P. A.; Anderson, S. B.; Anderson, W. G.; Arai, K.; Araya, M. C.; Arceneaux, C. C.; Areeda, J. S.; Arnaud, N.; Arun, K. G.; Ascenzi, S.; Ashton, G.; Ast, M.; Aston, S. M.; Astone, P.; Aufmuth, P.; Aulbert, C.; Babak, S.; Bacon, P.; Bader, M. K. M.; Baker, P. T.; Baldaccini, F.; Ballardin, G.; Ballmer, S. W.; Barayoga, J. C.; Barclay, S. E.; Barish, B. C.; Barker, D.; Barone, F.; Barr, B.; Barsotti, L.; Barsuglia, M.; Barta, D.; Bartlett, J.; Bartos, I.; Bassiri, R.; Basti, A.; Batch, J. C.; Baune, C.; Bavigadda, V.; Bazzan, M.; Bejger, M.; Bell, A. S.; Berger, B. K.; Bergmann, G.; Berry, C. P. L.; Bersanetti, D.; Bertolini, A.; Betzwieser, J.; Bhagwat, S.; Bhandare, R.; Bilenko, I. A.; Billingsley, G.; Birch, J.; Birney, R.; Biscans, S.; Bisht, A.; Bitossi, M.; Biwer, C.; Bizouard, M. A.; Blackburn, J. K.; Blair, C. D.; Blair, D. G.; Blair, R. M.; Bloemen, S.; Bock, O.; Boer, M.; Bogaert, G.; Bogan, C.; Bohe, A.; Bond, C.; Bondu, F.; Bonnand, R.; Boom, B. A.; Bork, R.; Boschi, V.; Bose, S.; Bouffanais, Y.; Bozzi, A.; Bradaschia, C.; Brady, P. R.; Braginsky, V. B.; Branchesi, M.; Brau, J. E.; Briant, T.; Brillet, A.; Brinkmann, M.; Brisson, V.; Brockill, P.; Broida, J. E.; Brooks, A. F.; Brown, D. A.; Brown, D. D.; Brown, N. M.; Brunett, S.; Buchanan, C. C.; Buikema, A.; Bulik, T.; Bulten, H. J.; Buonanno, A.; Buskulic, D.; Buy, C.; Byer, R. L.; Cabero, M.; Cadonati, L.; Cagnoli, G.; Cahillane, C.; Calderón Bustillo, J.; Callister, T.; Calloni, E.; Camp, J. B.; Cannon, K. C.; Cao, J.; Capano, C. D.; Capocasa, E.; Carbognani, F.; Caride, S.; Casanueva Diaz, J.; Casentini, C.; Caudill, S.; Cavaglià, M.; Cavalier, F.; Cavalieri, R.; Cella, G.; Cepeda, C. B.; Cerboni Baiardi, L.; Cerretani, G.; Cesarini, E.; Chamberlin, S. J.; Chan, M.; Chao, S.; Charlton, P.; Chassande-Mottin, E.; Cheeseboro, B. D.; Chen, H. Y.; Chen, Y.; Cheng, C.; Chincarini, A.; Chiummo, A.; Cho, H. S.; Cho, M.; Chow, J. H.; Christensen, N.; Chu, Q.; Chua, S.; Chung, S.; Ciani, G.; Clara, F.; Clark, J. A.; Cleva, F.; Coccia, E.; Cohadon, P.-F.; Colla, A.; Collette, C. G.; Cominsky, L.; Constancio, M.; Conte, A.; Conti, L.; Cook, D.; Corbitt, T. R.; Cornish, N.; Corsi, A.; Cortese, S.; Costa, C. A.; Coughlin, M. W.; Coughlin, S. B.; Coulon, J.-P.; Countryman, S. T.; Couvares, P.; Cowan, E. E.; Coward, D. M.; Cowart, M. J.; Coyne, D. C.; Coyne, R.; Craig, K.; Creighton, J. D. E.; Cripe, J.; Crowder, S. G.; Cumming, A.; Cunningham, L.; Cuoco, E.; Dal Canton, T.; Danilishin, S. L.; D’Antonio, S.; Danzmann, K.; Darman, N. S.; Dasgupta, A.; Da Silva Costa, C. F.; Dattilo, V.; Dave, I.; Davier, M.; Davies, G. S.; Daw, E. J.; Day, R.; De, S.; DeBra, D.; Debreczeni, G.; Degallaix, J.; De Laurentis, M.; Deléglise, S.; Del Pozzo, W.; Denker, T.; Dent, T.; Dergachev, V.; De Rosa, R.; DeRosa, R. T.; DeSalvo, R.; Devine, R. C.; Dhurandhar, S.; Díaz, M. C.; Di Fiore, L.; Di Giovanni, M.; Di Girolamo, T.; Di Lieto, A.; Di Pace, S.; Di Palma, I.; Di Virgilio, A.; Dolique, V.; Donovan, F.; Dooley, K. L.; Doravari, S.; Douglas, R.; Downes, T. P.; Drago, M.; Drever, R. W. P.; Driggers, J. C.; Ducrot, M.; Dwyer, S. E.; Edo, T. B.; Edwards, M. C.; Effler, A.; Eggenstein, H.-B.; Ehrens, P.; Eichholz, J.; Eikenberry, S. S.; Engels, W.; Essick, R. C.; Etzel, T.; Evans, M.; Evans, T. M.; Everett, R.; Factourovich, M.; Fafone, V.; Fair, H.; Fairhurst, S.; Fan, X.; Fang, Q.; Farinon, S.; Farr, B.; Farr, W. M.; Favata, M.; Fays, M.; Fehrmann, H.; Fejer, M. M.; Fenyvesi, E.; Ferrante, I.; Ferreira, E. C.; Ferrini, F.; Fidecaro, F.; Fiori, I.; Fiorucci, D.; Fisher, R. P.; Flaminio, R.; Fletcher, M.; Fournier, J.-D.; Frasca, S.; Frasconi, F.; Frei, Z.; Freise, A.; Frey, R.; Frey, V.; Fritschel, P.; Frolov, V. V.; Fulda, P.; Fyffe, M.; Gabbard, H. A. G.; Gair, J. R.; Gammaitoni, L.; Gaonkar, S. G.; Garufi, F.; Gaur, G.; Gehrels, N.; Gemme, G.; Geng, P.; Genin, E.; Gennai, A.; George, J.; Gergely, L.; Germain, V.; Ghosh, Abhirup; Ghosh, Archisman; Ghosh, S.; Giaime, J. A.; Giardina, K. D.; Giazotto, A.; Gill, K.; Glaefke, A.; Goetz, E.; Goetz, R.; Gondan, L.; González, G.; Gonzalez Castro, J. M.; Gopakumar, A.; Gordon, N. A.; Gorodetsky, M. L.; Gossan, S. E.; Gosselin, M.; Gouaty, R.; Grado, A.; Graef, C.; Graff, P. B.; Granata, M.; Grant, A.; Gras, S.; Gray, C.; Greco, G.; Green, A. C.; Groot, P.; Grote, H.; Grunewald, S.; Guidi, G. M.; Guo, X.; Gupta, A.; Gupta, M. K.; Gushwa, K. E.; Gustafson, E. K.; Gustafson, R.; Hacker, J. J.; Hall, B. R.; Hall, E. D.; Hammond, G.; Haney, M.; Hanke, M. M.; Hanks, J.; Hannam, M. D.; Hanson, J.; Hardwick, T.; Harms, J.; Harry, G. M.; Harry, I. W.; Hart, M. J.; Hartman, M. T.; Haster, C.-J.; Haughian, K.; Heidmann, A.; Heintze, M. C.; Heitmann, H.; Hello, P.; Hemming, G.; Hendry, M.; Heng, I. S.; Hennig, J.; Henry, J.; Heptonstall, A. W.; Heurs, M.; Hild, S.; Hoak, D.; Hofman, D.; Holt, K.; Holz, D. E.; Hopkins, P.; Hough, J.; Houston, E. A.; Howell, E. J.; Hu, Y. M.; Huang, S.; Huerta, E. A.; Huet, D.; Hughey, B.; Husa, S.; Huttner, S. H.; Huynh-Dinh, T.; Indik, N.; Ingram, D. R.; Inta, R.; Isa, H. N.; Isac, J.-M.; Isi, M.; Isogai, T.; Iyer, B. R.; Izumi, K.; Jacqmin, T.; Jang, H.; Jani, K.; Jaranowski, P.; Jawahar, S.; Jian, L.; Jiménez-Forteza, F.; Johnson, W. W.; Jones, D. I.; Jones, R.; Jonker, R. J. G.; Ju, L.; Haris, K.; Kalaghatgi, C. V.; Kalogera, V.; Kandhasamy, S.; Kang, G.; Kanner, J. B.; Kapadia, S. J.; Karki, S.; Karvinen, K. S.; Kasprzack, M.; Katsavounidis, E.; Katzman, W.; Kaufer, S.; Kaur, T.; Kawabe, K.; Kéfélian, F.; Kehl, M. S.; Keitel, D.; Kelley, D. B.; Kells, W.; Kennedy, R.; Key, J. S.; Khalili, F. Y.; Khan, I.; Khan, S.; Khan, Z.; Khazanov, E. A.; Kijbunchoo, N.; Kim, Chi-Woong; Kim, Chunglee; Kim, J.; Kim, K.; Kim, N.; Kim, W.; Kim, Y.-M.; Kimbrell, S. J.; King, E. J.; King, P. J.; Kissel, J. S.; Klein, B.; Kleybolte, L.; Klimenko, S.; Koehlenbeck, S. M.; Koley, S.; Kondrashov, V.; Kontos, A.; Korobko, M.; Korth, W. Z.; Kowalska, I.; Kozak, D. B.; Kringel, V.; Krishnan, B.; Królak, A.; Krueger, C.; Kuehn, G.; Kumar, P.; Kumar, R.; Kuo, L.; Kutynia, A.; Lackey, B. D.; Landry, M.; Lange, J.; Lantz, B.; Lasky, P. D.; Laxen, M.; Lazzarini, A.; Lazzaro, C.; Leaci, P.; Leavey, S.; Lebigot, E. O.; Lee, C. H.; Lee, H. K.; Lee, H. M.; Lee, K.; Lenon, A.; Leonardi, M.; Leong, J. R.; Leroy, N.; Letendre, N.; Levin, Y.; Lewis, J. B.; Li, T. G. F.; Libson, A.; Littenberg, T. B.; Lockerbie, N. A.; Lombardi, A. L.; London, L. T.; Lord, J. E.; Lorenzini, M.; Loriette, V.; Lormand, M.; Losurdo, G.; Lough, J. D.; Lück, H.; Lundgren, A. P.; Lynch, R.; Ma, Y.; Machenschalk, B.; MacInnis, M.; Macleod, D. M.; Magaña-Sandoval, F.; Magaña Zertuche, L.; Magee, R. M.; Majorana, E.; Maksimovic, I.; Malvezzi, V.; Man, N.; Mandic, V.; Mangano, V.; Mansell, G. L.; Manske, M.; Mantovani, M.; Marchesoni, F.; Marion, F.; Márka, S.; Márka, Z.; Markosyan, A. S.; Maros, E.; Martelli, F.; Martellini, L.; Martin, I. W.; Martynov, D. V.; Marx, J. N.; Mason, K.; Masserot, A.; Massinger, T. J.; Masso-Reid, M.; Mastrogiovanni, S.; Matichard, F.; Matone, L.; Mavalvala, N.; Mazumder, N.; McCarthy, R.; McClelland, D. E.; McCormick, S.; McGuire, S. C.; McIntyre, G.; McIver, J.; McManus, D. J.; McRae, T.; McWilliams, S. T.; Meacher, D.; Meadors, G. D.; Meidam, J.; Melatos, A.; Mendell, G.; Mercer, R. A.; Merilh, E. L.; Merzougui, M.; Meshkov, S.; Messenger, C.; Messick, C.; Metzdorff, R.; Meyers, P. M.; Mezzani, F.; Miao, H.; Michel, C.; Middleton, H.; Mikhailov, E. E.; Milano, L.; Miller, A. L.; Miller, A.; Miller, B. B.; Miller, J.; Millhouse, M.; Minenkov, Y.; Ming, J.; Mirshekari, S.; Mishra, C.; Mitra, S.; Mitrofanov, V. P.; Mitselmakher, G.; Mittleman, R.; Moggi, A.; Mohan, M.; Mohapatra, S. R. P.; Montani, M.; Moore, B. C.; Moore, C. J.; Moraru, D.; Moreno, G.; Morriss, S. R.; Mossavi, K.; Mours, B.; Mow-Lowry, C. M.; Mueller, G.; Muir, A. W.; Mukherjee, Arunava; Mukherjee, D.; Mukherjee, S.; Mukund, N.; Mullavey, A.; Munch, J.; Murphy, D. J.; Murray, P. G.; Mytidis, A.; Nardecchia, I.; Naticchioni, L.; Nayak, R. K.; Nedkova, K.; Nelemans, G.; Nelson, T. J. N.; Neri, M.; Neunzert, A.; Newton, G.; Nguyen, T. T.; Nielsen, A. B.; Nissanke, S.; Nitz, A.; Nocera, F.; Nolting, D.; Normandin, M. E. N.; Nuttall, L. K.; Oberling, J.; Ochsner, E.; O’Dell, J.; Oelker, E.; Ogin, G. H.; Oh, J. J.; Oh, S. H.; Ohme, F.; Oliver, M.; Oppermann, P.; Oram, Richard J.; O’Reilly, B.; O’Shaughnessy, R.; Ottaway, D. J.; Overmier, H.; Owen, B. J.; Pai, A.; Pai, S. A.; Palamos, J. R.; Palashov, O.; Palomba, C.; Pal-Singh, A.; Pan, H.; Pankow, C.; Pannarale, F.; Pant, B. C.; Paoletti, F.; Paoli, A.; Papa, M. A.; Paris, H. R.; Parker, W.; Pascucci, D.; Pasqualetti, A.; Passaquieti, R.; Passuello, D.; Patricelli, B.; Patrick, Z.; Pearlstone, B. L.; Pedraza, M.; Pedurand, R.; Pekowsky, L.; Pele, A.; Penn, S.; Perreca, A.; Perri, L. M.; Phelps, M.; Piccinni, O. J.; Pichot, M.; Piergiovanni, F.; Pierro, V.; Pillant, G.; Pinard, L.; Pinto, I. M.; Pitkin, M.; Poe, M.; Poggiani, R.; Popolizio, P.; Post, A.; Powell, J.; Prasad, J.; Pratt, J.; Predoi, V.; Prestegard, T.; Price, L. R.; Prijatelj, M.; Principe, M.; Privitera, S.; Prix, R.; Prodi, G. A.; Prokhorov, L.; Puncken, O.; Punturo, M.; Puppo, P.; Pürrer, M.; Qi, H.; Qin, J.; Qiu, S.; Quetschke, V.; Quintero, E. A.; Quitzow-James, R.; Raab, F. J.; Rabeling, D. S.; Radkins, H.; Raffai, P.; Raja, S.; Rajan, C.; Rakhmanov, M.; Rapagnani, P.; Raymond, V.; Razzano, M.; Re, V.; Read, J.; Reed, C. M.; Regimbau, T.; Rei, L.; Reid, S.; Reitze, D. H.; Rew, H.; Reyes, S. D.; Ricci, F.; Riles, K.; Rizzo, M.; Robertson, N. A.; Robie, R.; Robinet, F.; Rocchi, A.; Rolland, L.; Rollins, J. G.; Roma, V. J.; Romano, J. D.; Romano, R.; Romanov, G.; Romie, J. H.; Rosińska, D.; Rowan, S.; Rüdiger, A.; Ruggi, P.; Ryan, K.; Sachdev, S.; Sadecki, T.; Sadeghian, L.; Sakellariadou, M.; Salconi, L.; Saleem, M.; Salemi, F.; Samajdar, A.; Sammut, L.; Sanchez, E. J.; Sandberg, V.; Sandeen, B.; Sanders, J. R.; Sassolas, B.; Sathyaprakash, B. S.; Saulson, P. R.; Sauter, O. E. S.; Savage, R. L.; Sawadsky, A.; Schale, P.; Schilling, R.; Schmidt, J.; Schmidt, P.; Schnabel, R.; Schofield, R. M. S.; Schönbeck, A.; Schreiber, E.; Schuette, D.; Schutz, B. F.; Scott, J.; Scott, S. M.; Sellers, D.; Sengupta, A. S.; Sentenac, D.; Sequino, V.; Sergeev, A.; Setyawati, Y.; Shaddock, D. A.; Shaffer, T.; Shahriar, M. S.; Shaltev, M.; Shapiro, B.; Shawhan, P.; Sheperd, A.; Shoemaker, D. H.; Shoemaker, D. M.; Siellez, K.; Siemens, X.; Sieniawska, M.; Sigg, D.; Silva, A. D.; Singer, A.; Singer, L. P.; Singh, A.; Singh, R.; Singhal, A.; Sintes, A. M.; Slagmolen, B. J. J.; Smith, J. R.; Smith, N. D.; Smith, R. J. E.; Son, E. J.; Sorazu, B.; Sorrentino, F.; Souradeep, T.; Srivastava, A. K.; Staley, A.; Steinke, M.; Steinlechner, J.; Steinlechner, S.; Steinmeyer, D.; Stephens, B. C.; Stone, R.; Strain, K. A.; Straniero, N.; Stratta, G.; Strauss, N. A.; Strigin, S.; Sturani, R.; Stuver, A. L.; Summerscales, T. Z.; Sun, L.; Sunil, S.; Sutton, P. J.; Swinkels, B. L.; Szczepańczyk, M. J.; Tacca, M.; Talukder, D.; Tanner, D. B.; Tápai, M.; Tarabrin, S. P.; Taracchini, A.; Taylor, R.; Theeg, T.; Thirugnanasambandam, M. P.; Thomas, E. G.; Thomas, M.; Thomas, P.; Thorne, K. A.; Thrane, E.; Tiwari, S.; Tiwari, V.; Tokmakov, K. V.; Toland, K.; Tomlinson, C.; Tonelli, M.; Tornasi, Z.; Torres, C. V.; Torrie, C. I.; Töyrä, D.; Travasso, F.; Traylor, G.; Trifirò, D.; Tringali, M. C.; Trozzo, L.; Tse, M.; Turconi, M.; Tuyenbayev, D.; Ugolini, D.; Unnikrishnan, C. S.; Urban, A. L.; Usman, S. A.; Vahlbruch, H.; Vajente, G.; Valdes, G.; van Bakel, N.; van Beuzekom, M.; van den Brand, J. F. J.; Van Den Broeck, C.; Vander-Hyde, D. C.; van der Schaaf, L.; van Heijningen, J. V.; van Veggel, A. A.; Vardaro, M.; Vass, S.; Vasúth, M.; Vaulin, R.; Vecchio, A.; Vedovato, G.; Veitch, J.; Veitch, P. J.; Venkateswara, K.; Verkindt, D.; Vetrano, F.; Viceré, A.; Vinciguerra, S.; Vine, D. J.; Vinet, J.-Y.; Vitale, S.; Vo, T.; Vocca, H.; Vorvick, C.; Voss, D. V.; Vousden, W. D.; Vyatchanin, S. P.; Wade, A. R.; Wade, L. E.; Wade, M.; Walker, M.; Wallace, L.; Walsh, S.; Wang, G.; Wang, H.; Wang, M.; Wang, X.; Wang, Y.; Ward, R. L.; Warner, J.; Was, M.; Weaver, B.; Wei, L.-W.; Weinert, M.; Weinstein, A. J.; Weiss, R.; Wen, L.; Weßels, P.; Westphal, T.; Wette, K.; Whelan, J. T.; Whiting, B. F.; Williams, R. D.; Williamson, A. R.; Willis, J. L.; Willke, B.; Wimmer, M. H.; Winkler, W.; Wipf, C. C.; Wittel, H.; Woan, G.; Woehler, J.; Worden, J.; Wright, J. L.; Wu, D. S.; Wu, G.; Yablon, J.; Yam, W.; Yamamoto, H.; Yancey, C. C.; Yu, H.; Yvert, M.; Zadrożny, A.; Zangrando, L.; Zanolin, M.; Zendri, J.-P.; Zevin, M.; Zhang, L.; Zhang, M.; Zhang, Y.; Zhao, C.; Zhou, M.; Zhou, Z.; Zhu, X. J.; Zucker, M. E.; Zuraw, S. E.; Zweizig, J.; LIGO Scientific Collaboration; Virgo Collaboration

2018-03-01

The first observing run of Advanced LIGO spanned 4 months, from 12 September 2015 to 19 January 2016, during which gravitational waves were directly detected from two binary black hole systems, namely GW150914 and GW151226. Confident detection of gravitational waves requires an understanding of instrumental transients and artifacts that can reduce the sensitivity of a search. Studies of the quality of the detector data yield insights into the cause of instrumental artifacts and data quality vetoes specific to a search are produced to mitigate the effects of problematic data. In this paper, the systematic removal of noisy data from analysis time is shown to improve the sensitivity of searches for compact binary coalescences. The output of the PyCBC pipeline, which is a python-based code package used to search for gravitational wave signals from compact binary coalescences, is used as a metric for improvement. GW150914 was a loud enough signal that removing noisy data did not improve its significance. However, the removal of data with excess noise decreased the false alarm rate of GW151226 by more than two orders of magnitude, from 1 in 770 yr to less than 1 in 186 000 yr.

Selecting Items for Criterion-Referenced Tests.

Science.gov (United States)

Mellenbergh, Gideon J.; van der Linden, Wim J.

1982-01-01

Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

Geriatric Anxiety Scale: item response theory analysis, differential item functioning, and creation of a ten-item short form (GAS-10).

Science.gov (United States)

Mueller, Anne E; Segal, Daniel L; Gavett, Brandon; Marty, Meghan A; Yochim, Brian; June, Andrea; Coolidge, Frederick L

2015-07-01

The Geriatric Anxiety Scale (GAS; Segal et al. (Segal, D. L., June, A., Payne, M., Coolidge, F. L. and Yochim, B. (2010). Journal of Anxiety Disorders, 24, 709-714. doi:10.1016/j.janxdis.2010.05.002) is a self-report measure of anxiety that was designed to address unique issues associated with anxiety assessment in older adults. This study is the first to use item response theory (IRT) to examine the psychometric properties of a measure of anxiety in older adults. A large sample of older adults (n = 581; mean age = 72.32 years, SD = 7.64 years, range = 60 to 96 years; 64% women; 88% European American) completed the GAS. IRT properties were examined. The presence of differential item functioning (DIF) or measurement bias by age and sex was assessed, and a ten-item short form of the GAS (called the GAS-10) was created. All GAS items had discrimination parameters of 1.07 or greater. Items from the somatic subscale tended to have lower discrimination parameters than items on the cognitive or affective subscales. Two items were flagged for DIF, but the impact of the DIF was negligible. Women scored significantly higher than men on the GAS and its subscales. Participants in the young-old group (60 to 79 years old) scored significantly higher on the cognitive subscale than participants in the old-old group (80 years old and older). Results from the IRT analyses indicated that the GAS and GAS-10 have strong psychometric properties among older adults. We conclude by discussing implications and future research directions.

Asymptotic Standard Errors for Item Response Theory True Score Equating of Polytomous Items

Science.gov (United States)

Cher Wong, Cheow

2015-01-01

Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like…

MIMIC Methods for Assessing Differential Item Functioning in Polytomous Items

Science.gov (United States)

Wang, Wen-Chung; Shih, Ching-Lin

2010-01-01

Three multiple indicators-multiple causes (MIMIC) methods, namely, the standard MIMIC method (M-ST), the MIMIC method with scale purification (M-SP), and the MIMIC method with a pure anchor (M-PA), were developed to assess differential item functioning (DIF) in polytomous items. In a series of simulations, it appeared that all three methods…

Evaluation of Northwest University, Kano Post-UTME Test Items Using Item Response Theory

Science.gov (United States)

Bichi, Ado Abdu; Hafiz, Hadiza; Bello, Samira Abdullahi

2016-01-01

High-stakes testing is used for the purposes of providing results that have important consequences. Validity is the cornerstone upon which all measurement systems are built. This study applied the Item Response Theory principles to analyse Northwest University Kano Post-UTME Economics test items. The developed fifty (50) economics test items was…

Using Differential Item Functioning Procedures to Explore Sources of Item Difficulty and Group Performance Characteristics.

Science.gov (United States)

Scheuneman, Janice Dowd; Gerritz, Kalle

1990-01-01

Differential item functioning (DIF) methodology for revealing sources of item difficulty and performance characteristics of different groups was explored. A total of 150 Scholastic Aptitude Test items and 132 Graduate Record Examination general test items were analyzed. DIF was evaluated for males and females and Blacks and Whites. (SLD)

Item Response Data Analysis Using Stata Item Response Theory Package

Science.gov (United States)

Yang, Ji Seung; Zheng, Xiaying

2018-01-01

The purpose of this article is to introduce and review the capability and performance of the Stata item response theory (IRT) package that is available from Stata v.14, 2015. Using a simulated data set and a publicly available item response data set extracted from Programme of International Student Assessment, we review the IRT package from…

Benthic marine debris, with an emphasis on fishery-related items, surrounding Kodiak Island, Alaska, 1994-1996

Science.gov (United States)

Hess, N.A.; Ribic, C.A.; Vining, I.

1999-01-01

Composition and abundance of benthic marine debris were investigated during three bottom trawl surveys in inlet and offshore locations surrounding Kodiak Island, Alaska, 1994-1996. Debris items were primarily plastic and metal regardless of trawl location. Plastic bait jars, fishing line, and crab pots were the most common fishery-related debris items and were encountered in large amounts in inlets (20-25 items km-2), but were less abundant outside of inlets (4.5-11 items km-2). Overall density of debris was also significantly greater in inlets than outside of inlets. Plastic debris densities in inlets ranged 22-31.5 items km-2, 7.8-18.8 items km-2 outside of inlets. Trawls in inlets contained almost as much metal debris as plastic debris. Density of metal debris ranged from 21.2 to 23.7 items km-2 in inlets, a maximum of 2.7 items km-2 outside of inlets. Inlets around the town of Kodiak had the highest densities of fishery-related and total benthic debris. Differences in benthic debris density between inlets and outside of inlets and differences by area may be due to differences in fishing activity and water circulation patterns. At the current reduced levels of fishing activity, however, yearly monitoring of benthic debris appears unnecessary. Copyright (C) 1999.

Item Banking with Embedded Standards

Science.gov (United States)

MacCann, Robert G.; Stanley, Gordon

2009-01-01

An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

A comparison of item response models for accuracy and speed of item responses with applications to adaptive testing.

Science.gov (United States)

van Rijn, Peter W; Ali, Usama S

2017-05-01

We compare three modelling frameworks for accuracy and speed of item responses in the context of adaptive testing. The first framework is based on modelling scores that result from a scoring rule that incorporates both accuracy and speed. The second framework is the hierarchical modelling approach developed by van der Linden (2007, Psychometrika, 72, 287) in which a regular item response model is specified for accuracy and a log-normal model for speed. The third framework is the diffusion framework in which the response is assumed to be the result of a Wiener process. Although the three frameworks differ in the relation between accuracy and speed, one commonality is that the marginal model for accuracy can be simplified to the two-parameter logistic model. We discuss both conditional and marginal estimation of model parameters. Models from all three frameworks were fitted to data from a mathematics and spelling test. Furthermore, we applied a linear and adaptive testing mode to the data off-line in order to determine differences between modelling frameworks. It was found that a model from the scoring rule framework outperformed a hierarchical model in terms of model-based reliability, but the results were mixed with respect to correlations with external measures. © 2017 The British Psychological Society.

P2-19: The Effect of item Repetition on Item-Context Association Depends on the Prior Exposure of Items

Directory of Open Access Journals (Sweden)

Hongmi Lee

2012-10-01

Full Text Available Previous studies have reported conflicting findings on whether item repetition has beneficial or detrimental effects on source memory. To reconcile such contradictions, we investigated whether the degree of pre-exposure of items can be a potential modulating factor. The experimental procedures spanned two consecutive days. On Day 1, participants were exposed to a set of unfamiliar faces. On Day 2, the same faces presented on the previous day were used again in half of the participants, whereas novel faces were used for the other half. Day 2 procedures consisted of three successive phases: item repetition, source association, and source memory test. In the item repetition phase, half of the face stimuli were repeatedly presented while participants were making male/female judgments. During the source association phase, both the repeated and the unrepeated faces appeared in one of the four locations on the screen. Finally, participants were tested on the location in which a given face was presented during the previous phase and reported the confidence of their memory. Source memory accuracy was measured as the percentage of correct non-guess trials. As results, we found a significant interaction between prior exposure and repetition. Repetition impaired source memory when the items had been pre-exposed on Day 1, while it led to greater accuracy in novel ones. These results show that pre-experimental exposure can modulate the effects of repetition on associative binding between an item and its contextual information, suggesting that pre-existing representation and novelty signal interact to form new episodic memory.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

Directory of Open Access Journals (Sweden)

Yoon Soo ePark

2016-02-01

Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

Science.gov (United States)

Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

2016-01-01

This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

The Technical Quality of Test Items Generated Using a Systematic Approach to Item Writing.

Science.gov (United States)

Siskind, Theresa G.; Anderson, Lorin W.

The study was designed to examine the similarity of response options generated by different item writers using a systematic approach to item writing. The similarity of response options to student responses for the same item stems presented in an open-ended format was also examined. A non-systematic (subject matter expertise) approach and a…

Memory in pregnancy and post-partum: Item specific and relational encoding processes in recall and recognition.

Science.gov (United States)

Spataro, Pietro; Saraulli, Daniele; Oriolo, Debora; Costanzi, Marco; Zanetti, Humberto; Cestari, Vincenzo; Rossi-Arnaud, Clelia

2016-08-01

It has been recently proposed that pregnant women would perform memory tasks by focusing more on item-specific processes and less on relational processing, compared to post-partum women (Mickes, Wixted, Shapiro & Scarff, ). The present cross-sectional study tested this hypothesis by directly manipulating the type of encoding employed in the study phase. Pregnant, post-partum and control women either rated the pleasantness of word meaning (which induced item-specific elaboration) or named the semantic category to which they belonged (which induced relational elaboration). Memory for the encoded words was later tested in free recall (which emphasizes relational processing) and in recognition (which emphasizes item-specific processing). In line with Mickes et al.'s () conclusions, pregnant women in the item-specific condition performed worse than post-partum women in the relational condition in free recall, but not in recognition. However, compared to the other two groups, pregnant women also exhibited lower recognition accuracy in the item-specific condition. Overall, these results confirm that pregnant women rely on relational encoding less than post-partum women, but additionally suggest that the former group might use item-specific processes less efficiently than post-partum and control women. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

Generalizability theory and item response theory

NARCIS (Netherlands)

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a

Further differentiating item and order information in semantic memory: students' recall of words from the "CU Fight Song", Harry Potter book titles, and Scooby Doo theme song.

Science.gov (United States)

Overstreet, Michael F; Healy, Alice F; Neath, Ian

2017-01-01

University of Colorado (CU) students were tested for both order and item information in their semantic memory for the "CU Fight Song". Following an earlier study by Overstreet and Healy [(2011). Item and order information in semantic memory: Students' retention of the "CU fight song" lyrics. Memory & Cognition, 39, 251-259. doi: 10.3758/s13421-010-0018-3 ], a symmetrical bow-shaped serial position function (with both primacy and recency advantages) was found for reconstructing the order of the nine lines in the song, whereas a function with no primacy advantage was found for recalling a missing word from each line. This difference between order and item information was found even though students filled in missing words without any alternatives provided and missing words came from the beginning, middle, or end of each line. Similar results were found for CU students' recall of the sequence of Harry Potter book titles and the lyrics of the Scooby Doo theme song. These findings strengthen the claim that the pronounced serial position function in semantic memory occurs largely because of the retention of order, rather than item, information.

Sharing the cost of redundant items

DEFF Research Database (Denmark)

Hougaard, Jens Leth; Moulin, Hervé

2014-01-01

We ask how to share the cost of finitely many public goods (items) among users with different needs: some smaller subsets of items are enough to serve the needs of each user, yet the cost of all items must be covered, even if this entails inefficiently paying for redundant items. Typical examples...... are network connectivity problems when an existing (possibly inefficient) network must be maintained. We axiomatize a family cost ratios based on simple liability indices, one for each agent and for each item, measuring the relative worth of this item across agents, and generating cost allocation rules...... additive in costs....

Generalizability theory and item response theory

OpenAIRE

Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a selected-response format. This chapter presents a short overview of how item response theory and generalizability theory were integrated to model such assessments. Further, the precision of the esti...

The 12-item World Health Organization Disability Assessment Schedule II (WHO-DAS II: a nonparametric item response analysis

Directory of Open Access Journals (Sweden)

Fernandez Ana

2010-05-01

Full Text Available Abstract Background Previous studies have analyzed the psychometric properties of the World Health Organization Disability Assessment Schedule II (WHO-DAS II using classical omnibus measures of scale quality. These analyses are sample dependent and do not model item responses as a function of the underlying trait level. The main objective of this study was to examine the effectiveness of the WHO-DAS II items and their options in discriminating between changes in the underlying disability level by means of item response analyses. We also explored differential item functioning (DIF in men and women. Methods The participants were 3615 adult general practice patients from 17 regions of Spain, with a first diagnosed major depressive episode. The 12-item WHO-DAS II was administered by the general practitioners during the consultation. We used a non-parametric item response method (Kernel-Smoothing implemented with the TestGraf software to examine the effectiveness of each item (item characteristic curves and their options (option characteristic curves in discriminating between changes in the underliying disability level. We examined composite DIF to know whether women had a higher probability than men of endorsing each item. Results Item response analyses indicated that the twelve items forming the WHO-DAS II perform very well. All items were determined to provide good discrimination across varying standardized levels of the trait. The items also had option characteristic curves that showed good discrimination, given that each increasing option became more likely than the previous as a function of increasing trait level. No gender-related DIF was found on any of the items. Conclusions All WHO-DAS II items were very good at assessing overall disability. Our results supported the appropriateness of the weights assigned to response option categories and showed an absence of gender differences in item functioning.

Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

Science.gov (United States)

Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

2016-01-01

In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

The randomly renewed general item and the randomly inspected item with exponential life distribution

International Nuclear Information System (INIS)

Schneeweiss, W.G.

1979-01-01

For a randomly renewed item the probability distributions of the time to failure and of the duration of down time and the expectations of these random variables are determined. Moreover, it is shown that the same theory applies to randomly checked items with exponential probability distribution of life such as electronic items. The case of periodic renewals is treated as an example. (orig.) [de

A survey and comparison of heuristics for the 2D oriented on-line ...

African Journals Online (AJOL)

The two dimensional oriented on-line strip packing problem requires items to be packed, one at a time, into a strip of fixed width and infinite height so as to minimise the total height of the packing. The items may neither be rotated nor overlap. In this paper, ten heuristics from the literature are considered for the special case ...

17 CFR 260.7a-16 - Inclusion of items, differentiation between items and answers, omission of instructions.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Inclusion of items, differentiation between items and answers, omission of instructions. 260.7a-16 Section 260.7a-16 Commodity and... INDENTURE ACT OF 1939 Formal Requirements § 260.7a-16 Inclusion of items, differentiation between items and...

The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

Science.gov (United States)

Sahin, Alper; Anil, Duygu

2017-01-01

This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

Approximation Preserving Reductions among Item Pricing Problems

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

When a store sells items to customers, the store wishes to determine the prices of the items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy those items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we derive approximation preserving reductions among several item pricing problems and show that all of them have algorithms with good approximation ratio.

Which Statistic Should Be Used to Detect Item Preknowledge When the Set of Compromised Items Is Known?

Science.gov (United States)

Sinharay, Sandip

2017-09-01

Benefiting from item preknowledge is a major type of fraudulent behavior during educational assessments. Belov suggested the posterior shift statistic for detection of item preknowledge and showed its performance to be better on average than that of seven other statistics for detection of item preknowledge for a known set of compromised items. Sinharay suggested a statistic based on the likelihood ratio test for detection of item preknowledge; the advantage of the statistic is that its null distribution is known. Results from simulated and real data and adaptive and nonadaptive tests are used to demonstrate that the Type I error rate and power of the statistic based on the likelihood ratio test are very similar to those of the posterior shift statistic. Thus, the statistic based on the likelihood ratio test appears promising in detecting item preknowledge when the set of compromised items is known.

An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

DEFF Research Database (Denmark)

Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

2016-01-01

of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

Factoring handedness data: I. Item analysis.

Science.gov (United States)

Messinger, H B; Messinger, M I

1995-12-01

Recently in this journal Peters and Murphy challenged the validity of factor analyses done on bimodal handedness data, suggesting instead that right- and left-handers be studied separately. But bimodality may be avoidable if attention is paid to Oldfield's questionnaire format and instructions for the subjects. Two characteristics appear crucial: a two-column LEFT-RIGHT format for the body of the instrument and what we call Oldfield's Admonition: not to indicate strong preference for handedness item, such as write, unless "... the preference is so strong that you would never try to use the other hand unless absolutely forced to...". Attaining unimodality of an item distribution would seem to overcome the objections of Peters and Murphy. In a 1984 survey in Boston we used Oldfield's ten-item questionnaire exactly as published. This produced unimodal item distributions. With reflection of the five-point item scale and a logarithmic transformation, we achieved a degree of normalization for the items. Two surveys elsewhere based on Oldfield's 20-item list but with changes in the questionnaire format and the instructions, yielded markedly different item distributions with peaks at each extreme and sometimes in the middle as well.

Effects of hypnosis and level of processing on repeated recall of line drawings.

Science.gov (United States)

McKelvie, S J; Pullara, M

1988-07-01

Moderately susceptible subjects (N = 30) initially judged 30 line drawings of objects for pleasantness (deep processing) and 30 line drawings for visual complexity (shallow processing), after which they were given two immediate recall tests. Following a 48-hr delay, subjects were allocated randomly to hypnosis, simulation, or neutral control conditions and were tested four more times. Subjects produced more correct and incorrect responses over the six trials and gave a higher number of correct responses for deep items than for shallow items. Over the last four trials, hypnosis had no general facilitative effect relative to the other two treatments, but the effect of depth was strongest for hypnotized subjects, who recalled more deep items than did the controls. Finally, both hypnotized and simulating subjects rated their recall as more involuntary and their experimental treatment as more helpful than did the controls. Caution is urged in the forensic use of hypnosis as a retrieval device.

Item Modeling Concept Based on Multimedia Authoring

Directory of Open Access Journals (Sweden)

Janez Stergar

2008-09-01

Full Text Available In this paper a modern item design framework for computer based assessment based on Flash authoring environment will be introduced. Question design will be discussed as well as the multimedia authoring environment used for item modeling emphasized. Item type templates are a structured means of collecting and storing item information that can be used to improve the efficiency and security of the innovative item design process. Templates can modernize the item design, enhance and speed up the development process. Along with content creation, multimedia has vast potential for use in innovative testing. The introduced item design template is based on taxonomy of innovative items which have great potential for expanding the content areas and construct coverage of an assessment. The presented item design approach is based on GUI's – one for question design based on implemented item design templates and one for user interaction tracking/retrieval. The concept of user interfaces based on Flash technology will be discussed as well as implementation of the innovative approach of the item design forms with multimedia authoring. Also an innovative method for user interaction storage/retrieval based on PHP extending Flash capabilities in the proposed framework will be introduced.

The medial temporal lobes distinguish between within-item and item-context relations during autobiographical memory retrieval.

Science.gov (United States)

Sheldon, Signy; Levine, Brian

2015-12-01

During autobiographical memory retrieval, the medial temporal lobes (MTL) relate together multiple event elements, including object (within-item relations) and context (item-context relations) information, to create a cohesive memory. There is consistent support for a functional specialization within the MTL according to these relational processes, much of which comes from recognition memory experiments. In this study, we compared brain activation patterns associated with retrieving within-item relations (i.e., associating conceptual and sensory-perceptual object features) and item-context relations (i.e., spatial relations among objects) with respect to naturalistic autobiographical retrieval. We developed a novel paradigm that cued participants to retrieve information about past autobiographical events, non-episodic within-item relations, and non-episodic item-context relations with the perceptuomotor aspects of retrieval equated across these conditions. We used multivariate analysis techniques to extract common and distinct patterns of activity among these conditions within the MTL and across the whole brain, both in terms of spatial and temporal patterns of activity. The anterior MTL (perirhinal cortex and anterior hippocampus) was preferentially recruited for generating within-item relations later in retrieval whereas the posterior MTL (posterior parahippocampal cortex and posterior hippocampus) was preferentially recruited for generating item-context relations across the retrieval phase. These findings provide novel evidence for functional specialization within the MTL with respect to naturalistic memory retrieval. © 2015 Wiley Periodicals, Inc.

Differential item functioning of the patient-reported outcomes information system (PROMIS®) pain interference item bank by language (Spanish versus English).

Science.gov (United States)

Paz, Sylvia H; Spritzer, Karen L; Reise, Steven P; Hays, Ron D

2017-06-01

About 70% of Latinos, 5 years old or older, in the United States speak Spanish at home. Measurement equivalence of the PROMIS ® pain interference (PI) item bank by language of administration (English versus Spanish) has not been evaluated. A sample of 527 adult Spanish-speaking Latinos completed the Spanish version of the 41-item PROMIS ® pain interference item bank. We evaluate dimensionality, monotonicity and local independence of the Spanish-language items. Then we evaluate differential item functioning (DIF) using ordinal logistic regression with item response theory scores estimated from DIF-free "anchor" items. One of the 41 items in the Spanish version of the PROMIS ® PI item bank was identified as having significant uniform DIF. English- and Spanish-speaking subjects with the same level of pain interference responded differently to 1 of the 41 items in the PROMIS ® PI item bank. This item was not retained due to proprietary issues. The original English language item parameters can be used when estimating PROMIS ® PI scores.

A strategy for optimizing item-pool management

NARCIS (Netherlands)

Ariel, A.; van der Linden, Willem J.; Veldkamp, Bernard P.

2006-01-01

Item-pool management requires a balancing act between the input of new items into the pool and the output of tests assembled from it. A strategy for optimizing item-pool management is presented that is based on the idea of a periodic update of an optimal blueprint for the item pool to tune item

Item response theory - A first approach

Science.gov (United States)

Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

2017-07-01

The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

Standardization of beam line representations

International Nuclear Information System (INIS)

Carey, David C.

1998-01-01

Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

Standardization of beam line representations

International Nuclear Information System (INIS)

Carey, David C.

1999-01-01

Standardization of beam line representations means that a single set of data can be used in many situations to represent a beam line. This set of data should be the same no matter what the program to be run or the calculation to be made. We have concerned ourselves with three types of standardization: (1) The same set of data should be usable by different programs. (2) The inclusion of other items in the data, such as calculations to be done, units to be used, or preliminary specifications, should be in a notation similar to the lattice specification. (3) A single set of data should be used to represent a given beam line, no matter what is being modified or calculated. The specifics of what is to be modified or calculated can be edited into the data as part of the calculation. These three requirements all have aspects not previously discussed in a public forum. Implementations into TRANSPORT will be discussed

Investigating Separate and Concurrent Approaches for Item Parameter Drift in 3PL Item Response Theory Equating

Science.gov (United States)

Arce-Ferrer, Alvaro J.; Bulut, Okan

2017-01-01

This study examines separate and concurrent approaches to combine the detection of item parameter drift (IPD) and the estimation of scale transformation coefficients in the context of the common item nonequivalent groups design with the three-parameter item response theory equating. The study uses real and synthetic data sets to compare the two…

The real meaning of complex Minkowski-space world-lines

Energy Technology Data Exchange (ETDEWEB)

Adamo, T M [University of Oxford, Mathematical Institute, 24-29 St Giles, Oxford, OX1 3LB (United Kingdom); Newman, E T, E-mail: newman@pitt.ed [University of Pittsburgh, Department of Physics and Astronomy, Pittsburgh, PA 15213 (United States)

2010-04-07

In connection with the study of shear-free null geodesics in Minkowski space, we investigate the real geometric effects in real Minkowski space that are induced by and associated with complex world-lines in complex Minkowski space. It was already known, in a formal manner, that complex analytic curves in complex Minkowski space induce shear-free null geodesic congruences. Here we look at the direct geometric connections of the complex line and the real structures. Among other items, we show, in particular, how a complex world-line projects into the real Minkowski space in the form of a real shear-free null geodesic congruence.

The real meaning of complex Minkowski-space world-lines

International Nuclear Information System (INIS)

Adamo, T M; Newman, E T

2010-01-01

In connection with the study of shear-free null geodesics in Minkowski space, we investigate the real geometric effects in real Minkowski space that are induced by and associated with complex world-lines in complex Minkowski space. It was already known, in a formal manner, that complex analytic curves in complex Minkowski space induce shear-free null geodesic congruences. Here we look at the direct geometric connections of the complex line and the real structures. Among other items, we show, in particular, how a complex world-line projects into the real Minkowski space in the form of a real shear-free null geodesic congruence.

Radioactive liquid wastes lines removal project at Los Alamos (1981-1986)

International Nuclear Information System (INIS)

Elder, J.C.; Cox, E.J.; Hohner, D.P.; Valentine, A.M.

1986-09-01

This report describes the abandoned liquid waste lines removal operations conducted at Los Alamos in the period 1981 to 1986. Particular emphasis has been placed on as-left conditions, that is, on the location of sections of waste lines or contaminated soil which were left in place on the basis of ALARA decisions. Contaminated items were left when interfering utilities, roads, structures, or great depth made complete removal not cost effective or not safe. Left items were either not highly contaminated or they were not near the surface. Total cost of the project was $4.2 million. Approximately 5800 m 3 of contaminated waste was placed in the Solid Waste Management Site at TA-54 Area G. The project accomplished the removal of approximately 34,500 ft (6.5 miles) of abandoned waste lines under carefully controlled conditions. Procedures for excavation, waste disposal, personnel protection, and radiation monitoring are described. Environmental monitoring criteria and methods for determining acceptable levels of contamination in soils and on surfaces are discussed

Analysis of differential item functioning in the depression item bank from the Patient Reported Outcome Measurement Information System (PROMIS: An item response theory approach

Directory of Open Access Journals (Sweden)

JOSEPH P. EIMICKE

2009-06-01

Full Text Available The aims of this paper are to present findings related to differential item functioning (DIF in the Patient Reported Outcome Measurement Information System (PROMIS depression item bank, and to discuss potential threats to the validity of results from studies of DIF. The 32 depression items studied were modified from several widely used instruments. DIF analyses of gender, age and education were performed using a sample of 735 individuals recruited by a survey polling firm. DIF hypotheses were generated by asking content experts to indicate whether or not they expected DIF to be present, and the direction of the DIF with respect to the studied comparison groups. Primary analyses were conducted using the graded item response model (for polytomous, ordered response category data with likelihood ratio tests of DIF, accompanied by magnitude measures. Sensitivity analyses were performed using other item response models and approaches to DIF detection. Despite some caveats, the items that are recommended for exclusion or for separate calibration were "I felt like crying" and "I had trouble enjoying things that I used to enjoy." The item, "I felt I had no energy," was also flagged as evidencing DIF, and recommended for additional review. On the one hand, false DIF detection (Type 1 error was controlled to the extent possible by ensuring model fit and purification. On the other hand, power for DIF detection might have been compromised by several factors, including sparse data and small sample sizes. Nonetheless, practical and not just statistical significance should be considered. In this case the overall magnitude and impact of DIF was small for the groups studied, although impact was relatively large for some individuals.

76 FR 60474 - Commercial Item Handbook

Science.gov (United States)

2011-09-29

... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

Demonstrating the effects of phonological similarity and frequency on item and order memory in Down syndrome using process dissociation.

Science.gov (United States)

Smith, Elizabeth; Jarrold, Christopher

2014-12-01

It is important to distinguish between memory for item information and memory for order information when considering the nature of verbal short-term memory (vSTM) performance. Although other researchers have attempted to make this distinction between item and order memory in children, none has done so using process dissociation. This study shows that such an approach can be particularly useful and informative. Individuals with Down syndrome (DS) tend to experience a vSTM deficit. These two experiments explored whether phonological similarity (Experiment 1) and item frequency (Experiment 2) affected vSTM for item and order information in a group of individuals with DS compared with typically developing (TD) vocabulary-matched children. Process dissociation was used to obtain measures of item and order memory via Nairne and Kelley's procedure (Journal of Memory and Language, 50 (2004) 113-133). Those with DS were poorer than the matched TD group for recall of both item and order information. However, in both populations, phonologically similar items reduced order memory but enhanced item memory, whereas high-frequency items resulted in improvements in both item and order memory-effects that are in line with previous research in the adult literature. These results indicate that, despite poorer vSTM performance in DS, individuals experience phonological coding of verbal input and a contribution of long-term memory knowledge to recall. These findings inform routes for interventions for those with DS, highlighting the need to enhance both item and order memory. Moreover, this work demonstrates that process dissociation is applicable and informative for studying special populations and children. Copyright © 2014 Elsevier Inc. All rights reserved.

Item Analysis in Introductory Economics Testing.

Science.gov (United States)

Tinari, Frank D.

1979-01-01

Computerized analysis of multiple choice test items is explained. Examples of item analysis applications in the introductory economics course are discussed with respect to three objectives: to evaluate learning; to improve test items; and to help improve classroom instruction. Problems, costs and benefits of the procedures are identified. (JMD)

A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

Directory of Open Access Journals (Sweden)

Michalis P Michaelides

2010-10-01

Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

Science.gov (United States)

Michaelides, Michalis P

2010-01-01

Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

A Comparison of the 27-Item and 12-Item Intolerance of Uncertainty Scales

Science.gov (United States)

Khawaja, Nigar G.; Yu, Lai Ngo Heidi

2010-01-01

The 27-item Intolerance of Uncertainty Scale (IUS) has become one of the most frequently used measures of Intolerance of Uncertainty. More recently, an abridged, 12-item version of the IUS has been developed. The current research used clinical (n = 50) and non-clinical (n = 56) samples to examine and compare the psychometric properties of both…

More is not Always Better: The Relation between Item Response and Item Response Time in Raven’s Matrices

Directory of Open Access Journals (Sweden)

Frank Goldhammer

2015-03-01

Full Text Available The role of response time in completing an item can have very different interpretations. Responding more slowly could be positively related to success as the item is answered more carefully. However, the association may be negative if working faster indicates higher ability. The objective of this study was to clarify the validity of each assumption for reasoning items considering the mode of processing. A total of 230 persons completed a computerized version of Raven’s Advanced Progressive Matrices test. Results revealed that response time overall had a negative effect. However, this effect was moderated by items and persons. For easy items and able persons the effect was strongly negative, for difficult items and less able persons it was less negative or even positive. The number of rules involved in a matrix problem proved to explain item difficulty significantly. Most importantly, a positive interaction effect between the number of rules and item response time indicated that the response time effect became less negative with an increasing number of rules. Moreover, exploratory analyses suggested that the error type influenced the response time effect.

Examination of the PROMIS upper extremity item bank.

Science.gov (United States)

Hung, Man; Voss, Maren W; Bounsanga, Jerry; Crum, Anthony B; Tyser, Andrew R

Clinical measurement. The psychometric properties of the PROMIS v1.2 UE item bank were tested on various samples prior to its release, but have not been fully evaluated among the orthopaedic population. This study assesses the performance of the UE item bank within the UE orthopaedic patient population. The UE item bank was administered to 1197 adult patients presenting to a tertiary orthopaedic clinic specializing in hand and UE conditions and was examined using traditional statistics and Rasch analysis. The UE item bank fits a unidimensional model (outfit MNSQ range from 0.64 to 1.70) and has adequate reliabilities (person = 0.84; item = 0.82) and local independence (item residual correlations range from -0.37 to 0.34). Only one item exhibits gender differential item functioning. Most items target low levels of function. The UE item bank is a useful clinical assessment tool. Additional items covering higher functions are needed to enhance validity. Supplemental testing is recommended for patients at higher levels of function until more high function UE items are developed. 2c. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Psychometric Consequences of Subpopulation Item Parameter Drift

Science.gov (United States)

Huggins-Manley, Anne Corinne

2017-01-01

This study defines subpopulation item parameter drift (SIPD) as a change in item parameters over time that is dependent on subpopulations of examinees, and hypothesizes that the presence of SIPD in anchor items is associated with bias and/or lack of invariance in three psychometric outcomes. Results show that SIPD in anchor items is associated…

Location Indices for Ordinal Polytomous Items Based on Item Response Theory. Research Report. ETS RR-15-20

Science.gov (United States)

Ali, Usama S.; Chang, Hua-Hua; Anderson, Carolyn J.

2015-01-01

Polytomous items are typically described by multiple category-related parameters; situations, however, arise in which a single index is needed to describe an item's location along a latent trait continuum. Situations in which a single index would be needed include item selection in computerized adaptive testing or test assembly. Therefore single…

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning.

Science.gov (United States)

Watt, Torquil; Groenvold, Mogens; Hegedüs, Laszlo; Bonnema, Steen Joop; Rasmussen, Åse Krogh; Feldt-Rasmussen, Ulla; Bjorner, Jakob Bue

2014-02-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis. A total of 838 patients with benign thyroid diseases completed the ThyPRO questionnaire (84 five-point items, 13 scales). Uniform and nonuniform DIF were investigated using ordinal logistic regression, testing for both statistical significance and magnitude (∆R(2) > 0.02). Scale level was estimated by the sum score, after purification. Twenty instances of DIF in 17 of the 84 items were found. Eight according to diagnosis, where the goiter scale was the one most affected, possibly due to differing perceptions in patients with auto-immune thyroid diseases compared to patients with simple goiter. Eight DIFs according to age were found, of which 5 were in positively worded items, which younger patients were more likely to endorse; one according to gender: women were more likely to report crying, and three according to educational level. The vast majority of DIF had only minor influence on the scale scores (0.1-2.3 points on the 0-100 scales), but two DIF corresponded to a difference of 4.6 and 9.8, respectively. Ordinal logistic regression identified DIF in 17 of 84 items. The potential impact of this on the present scales was low, but items displaying DIF could be avoided when developing abbreviated scales, where the potential impact of DIF (due to fewer items) will be larger.

Loglinear multidimensional IRT models for polytomously scired Items

NARCIS (Netherlands)

Kelderman, Henk

1988-01-01

A loglinear item response theory (IRT) model is proposed that relates polytomously scored item responses to a multidimensional latent space. Each item may have a different response function where each item response may be explained by one or more latent traits. Item response functions may follow a

48 CFR 852.214-72 - Alternate item(s).

Science.gov (United States)

2010-10-01

... AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 852.214-72... 2008) Bids on []* will be given equal consideration along with bids on []** and any such bids received... [].** * Contracting officer will insert an alternate item that is considered acceptable. ** Contracting officer will...

Macrostructural Treatment of Multi-word Lexical Items

Directory of Open Access Journals (Sweden)

Alenka Vrbinc

2011-05-01

Full Text Available The paper discusses the macrostructural treatment of multi-word lexical items in mono- and bilingual dictionaries. First, the classification of multi-word lexical items is presented, and special attention is paid to the discussion of compounds – a specific group of multi-word lexical items that is most commonly afforded headword status but whose inclusion in the headword list may also depend on spelling. Then the inclusion of multi-word lexical items in monolingual dictionaries is dealt with in greater detail, while the results of a short survey on the inclusion of five randomly chosen multi-word lexical items in seven English monolingual dictionaries are presented. The proposals as to how to treat these five multi-word lexical items in bilingual dictionaries are presented in the section about the inclusion of multi-word lexical items in bilingual dictionaries. The conclusion is that it is most important to take the users’ needs into consideration and to make any dictionary as user friendly as possible.

Losing Items in the Psychogeriatric Nursing Home

Directory of Open Access Journals (Sweden)

J. van Hoof PhD

2016-09-01

Full Text Available Introduction: Losing items is a time-consuming occurrence in nursing homes that is ill described. An explorative study was conducted to investigate which items got lost by nursing home residents, and how this affects the residents and family caregivers. Method: Semi-structured interviews and card sorting tasks were conducted with 12 residents with early-stage dementia and 12 family caregivers. Thematic analysis was applied to the outcomes of the sessions. Results: The participants stated that numerous personal items and assistive devices get lost in the nursing home environment, which had various emotional, practical, and financial implications. Significant amounts of time are spent on trying to find items, varying from 1 hr up to a couple of weeks. Numerous potential solutions were identified by the interviewees. Discussion: Losing items often goes together with limitations to the participation of residents. Many family caregivers are reluctant to replace lost items, as these items may get lost again.

‘Forget me (not?’ – Remembering forget-items versus un-cued items in directed forgetting

Directory of Open Access Journals (Sweden)

Bastian eZwissler

2015-11-01

Full Text Available Humans need to be able to selectively control their memories. Here, we investigate the underlying processes in item-method directed forgetting and compare the classic active memory cues in this paradigm with a passive instruction. Typically, individual items are presented and each is followed by either a forget- or remember-instruction. On a surprise test of all items, memory is then worse for to-be-forgotten items (TBF compared to to-be-remembered items (TBR. This is thought to result from selective rehearsal of TBR, or from active inhibition of TBF, or from both. However, evidence suggests that if a forget instruction initiates active processing, paradoxical effects may also arise. To investigate the underlying mechanisms, four experiments were conducted where un-cued items (UI were introduced and recognition performance was compared between TBR, TBF and UI stimuli. Accuracy was encouraged via a performance-dependent monetary bonus. Across all experiments, including perceptually fully matched variants, memory accuracy for TBF was reduced compared to TBR, but better than for UI. Moreover, participants used a more conservative response criterion when responding to TBF stimuli. Thus, ironically, the F cue results in active processing, but this does not have inhibitory effects that would impair recognition memory beyond a un-cued baseline condition. This casts doubts on inhibitory accounts of item-method directed forgetting and is also difficult to reconcile with pure selective rehearsal of TBR. While the F-cue does induce active processing, this does not result in particularly successful forgetting. The pattern seems most consistent with the notion of ironic processing.

Do animals and furniture items elicit different brain responses in human infants?

Science.gov (United States)

Jeschonek, Susanna; Marinovic, Vesna; Hoehl, Stefanie; Elsner, Birgit; Pauen, Sabina

2010-11-01

One of the earliest categorical distinctions to be made by preverbal infants is the animate-inanimate distinction. To explore the neural basis for this distinction in 7-8-month-olds, an equal number of animal and furniture pictures was presented in an ERP-paradigm. The total of 118 pictures, all looking different from each other, were presented in a semi-randomized order for 1000ms each. Infants' brain responses to exemplars from both categories differed systematically regarding the negative central component (Nc: 400-600ms) at anterior channels. More specifically, the Nc was enhanced for animals in one subgroup of infants, and for furniture items in another subgroup of infants. Explorative analyses related to categorical priming further revealed category-specific differences in brain responses in the late time window (650-1550ms) at right frontal channels: Unprimed stimuli (preceded by a different-category item) elicited a more positive response as compared to primed stimuli (preceded by a same-category item). In sum, these findings suggest that the infant's brain discriminates exemplars from both global domains. Given the design of our task, we conclude that processes of category identification are more likely to account for our findings than processes of on-line category formation during the experimental session. Copyright © 2009 Elsevier B.V. All rights reserved.

Assembly-line health check up in digitalized hospital.

Science.gov (United States)

Liu, Yalan; Yao, Bin; Zhang, Zigang

2002-01-01

The health check up flow of digital hospital can be consulted with the assembly line of industry factory. Because they have the following same features: highly specialized workstation, closeness and continuance, rhythm, balanced production, continuous production. The essential prerequisites are as the follows: The inspecting items and methods should be stable; advanced product mix and stable production design; standardized raw material, consumption, procedure, inspection method; there are lots of request for health inspection; the customers move at the least unit; the space arrangement should be reasonable; the time arrangement should be proportion. With the computer net, the digital inspection can achieves the raw material controlling accurately. The basis of check up line concerns about equipment, net and software, data collection, and personnel. The group technology is used in the health inspection flow design of the digital hospital in the field of items customers and zone redivided. The digital assembly linemic health inspect has the following stages: member registering, notice, check in, arrange order, time control, report, feedback and analysis. The assembly linemic has following advantages: increasing the productivity, the space utility, satisfaction of customer, fund returning, lowering the cost and ensuring the quality.

Quality Assurance with Plan Veto: reincarnation of a record and verify system and its potential value.

Science.gov (United States)

Noel, Camille E; Gutti, Veerarajesh; Bosch, Walter; Mutic, Sasa; Ford, Eric; Terezakis, Stephanie; Santanam, Lakshmi

2014-04-01

To quantify the potential impact of the Integrating the Healthcare Enterprise-Radiation Oncology Quality Assurance with Plan Veto (QAPV) on patient safety of external beam radiation therapy (RT) operations. An institutional database of events (errors and near-misses) was used to evaluate the ability of QAPV to prevent clinically observed events. We analyzed reported events that were related to Digital Imaging and Communications in Medicine RT plan parameter inconsistencies between the intended treatment (on the treatment planning system) and the delivered treatment (on the treatment machine). Critical Digital Imaging and Communications in Medicine RT plan parameters were identified. Each event was scored for importance using the Failure Mode and Effects Analysis methodology. Potential error occurrence (frequency) was derived according to the collected event data, along with the potential event severity, and the probability of detection with and without the theoretical implementation of the QAPV plan comparison check. Failure Mode and Effects Analysis Risk Priority Numbers (RPNs) with and without QAPV were compared to quantify the potential benefit of clinical implementation of QAPV. The implementation of QAPV could reduce the RPN values for 15 of 22 (71%) of evaluated parameters, with an overall average reduction in RPN of 68 (range, 0-216). For the 6 high-risk parameters (>200), the average reduction in RPN value was 163 (range, 108-216). The RPN value reduction for the intermediate-risk (200 > RPN > 100) parameters was (0-140). With QAPV, the largest RPN value for "Beam Meterset" was reduced from 324 to 108. The maximum reduction in RPN value was for Beam Meterset (216, 66.7%), whereas the maximum percentage reduction was for Cumulative Meterset Weight (80, 88.9%). This analysis quantifies the value of the Integrating the Healthcare Enterprise-Radiation Oncology QAPV implementation in clinical workflow. We demonstrate that although QAPV does not provide a

Quality Assurance With Plan Veto: Reincarnation of a Record and Verify System and Its Potential Value

Energy Technology Data Exchange (ETDEWEB)

Noel, Camille E. [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Gutti, VeeraRajesh [Department of Radiation Oncology, Scott and White Healthcare, Temple, Texas (United States); Bosch, Walter; Mutic, Sasa [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States); Ford, Eric [Department of Radiation Oncology, University of Washington Medical Center, Seattle, Washington (United States); Terezakis, Stephanie [Department of Radiation Oncology, Johns Hopkins University, Baltimore, Maryland (United States); Santanam, Lakshmi, E-mail: lsantanam@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, Missouri (United States)

2014-04-01

Purpose: To quantify the potential impact of the Integrating the Healthcare Enterprise–Radiation Oncology Quality Assurance with Plan Veto (QAPV) on patient safety of external beam radiation therapy (RT) operations. Methods and Materials: An institutional database of events (errors and near-misses) was used to evaluate the ability of QAPV to prevent clinically observed events. We analyzed reported events that were related to Digital Imaging and Communications in Medicine RT plan parameter inconsistencies between the intended treatment (on the treatment planning system) and the delivered treatment (on the treatment machine). Critical Digital Imaging and Communications in Medicine RT plan parameters were identified. Each event was scored for importance using the Failure Mode and Effects Analysis methodology. Potential error occurrence (frequency) was derived according to the collected event data, along with the potential event severity, and the probability of detection with and without the theoretical implementation of the QAPV plan comparison check. Failure Mode and Effects Analysis Risk Priority Numbers (RPNs) with and without QAPV were compared to quantify the potential benefit of clinical implementation of QAPV. Results: The implementation of QAPV could reduce the RPN values for 15 of 22 (71%) of evaluated parameters, with an overall average reduction in RPN of 68 (range, 0-216). For the 6 high-risk parameters (>200), the average reduction in RPN value was 163 (range, 108-216). The RPN value reduction for the intermediate-risk (200 > RPN > 100) parameters was (0-140). With QAPV, the largest RPN value for “Beam Meterset” was reduced from 324 to 108. The maximum reduction in RPN value was for Beam Meterset (216, 66.7%), whereas the maximum percentage reduction was for Cumulative Meterset Weight (80, 88.9%). Conclusion: This analysis quantifies the value of the Integrating the Healthcare Enterprise–Radiation Oncology QAPV implementation in clinical workflow

Quality Assurance With Plan Veto: Reincarnation of a Record and Verify System and Its Potential Value

International Nuclear Information System (INIS)

Noel, Camille E.; Gutti, VeeraRajesh; Bosch, Walter; Mutic, Sasa; Ford, Eric; Terezakis, Stephanie; Santanam, Lakshmi

2014-01-01

Purpose: To quantify the potential impact of the Integrating the Healthcare Enterprise–Radiation Oncology Quality Assurance with Plan Veto (QAPV) on patient safety of external beam radiation therapy (RT) operations. Methods and Materials: An institutional database of events (errors and near-misses) was used to evaluate the ability of QAPV to prevent clinically observed events. We analyzed reported events that were related to Digital Imaging and Communications in Medicine RT plan parameter inconsistencies between the intended treatment (on the treatment planning system) and the delivered treatment (on the treatment machine). Critical Digital Imaging and Communications in Medicine RT plan parameters were identified. Each event was scored for importance using the Failure Mode and Effects Analysis methodology. Potential error occurrence (frequency) was derived according to the collected event data, along with the potential event severity, and the probability of detection with and without the theoretical implementation of the QAPV plan comparison check. Failure Mode and Effects Analysis Risk Priority Numbers (RPNs) with and without QAPV were compared to quantify the potential benefit of clinical implementation of QAPV. Results: The implementation of QAPV could reduce the RPN values for 15 of 22 (71%) of evaluated parameters, with an overall average reduction in RPN of 68 (range, 0-216). For the 6 high-risk parameters (>200), the average reduction in RPN value was 163 (range, 108-216). The RPN value reduction for the intermediate-risk (200 > RPN > 100) parameters was (0-140). With QAPV, the largest RPN value for “Beam Meterset” was reduced from 324 to 108. The maximum reduction in RPN value was for Beam Meterset (216, 66.7%), whereas the maximum percentage reduction was for Cumulative Meterset Weight (80, 88.9%). Conclusion: This analysis quantifies the value of the Integrating the Healthcare Enterprise–Radiation Oncology QAPV implementation in clinical workflow

Item selection via Bayesian IRT models.

Science.gov (United States)

Arima, Serena

2015-02-10

With reference to a questionnaire that aimed to assess the quality of life for dysarthric speakers, we investigate the usefulness of a model-based procedure for reducing the number of items. We propose a mixed cumulative logit model, which is known in the psychometrics literature as the graded response model: responses to different items are modelled as a function of individual latent traits and as a function of item characteristics, such as their difficulty and their discrimination power. We jointly model the discrimination and the difficulty parameters by using a k-component mixture of normal distributions. Mixture components correspond to disjoint groups of items. Items that belong to the same groups can be considered equivalent in terms of both difficulty and discrimination power. According to decision criteria, we select a subset of items such that the reduced questionnaire is able to provide the same information that the complete questionnaire provides. The model is estimated by using a Bayesian approach, and the choice of the number of mixture components is justified according to information criteria. We illustrate the proposed approach on the basis of data that are collected for 104 dysarthric patients by local health authorities in Lecce and in Milan. Copyright © 2014 John Wiley & Sons, Ltd.

Re-evaluating a vision-related quality of life questionnaire with item response theory (IRT and differential item functioning (DIF analyses

Directory of Open Access Journals (Sweden)

Knol Dirk L

2011-09-01

Full Text Available Abstract Background For the Low Vision Quality Of Life questionnaire (LVQOL it is unknown whether the psychometric properties are satisfactory when an item response theory (IRT perspective is considered. This study evaluates some essential psychometric properties of the LVQOL questionnaire in an IRT model, and investigates differential item functioning (DIF. Methods Cross-sectional data were used from an observational study among visually-impaired patients (n = 296. Calibration was performed for every dimension of the LVQOL in the graded response model. Item goodness-of-fit was assessed with the S-X2-test. DIF was assessed on relevant background variables (i.e. age, gender, visual acuity, eye condition, rehabilitation type and administration type with likelihood-ratio tests for DIF. The magnitude of DIF was interpreted by assessing the largest difference in expected scores between subgroups. Measurement precision was assessed by presenting test information curves; reliability with the index of subject separation. Results All items of the LVQOL dimensions fitted the model. There was significant DIF on several items. For two items the maximum difference between expected scores exceeded one point, and DIF was found on multiple relevant background variables. Item 1 'Vision in general' from the "Adjustment" dimension and item 24 'Using tools' from the "Reading and fine work" dimension were removed. Test information was highest for the "Reading and fine work" dimension. Indices for subject separation ranged from 0.83 to 0.94. Conclusions The items of the LVQOL showed satisfactory item fit to the graded response model; however, two items were removed because of DIF. The adapted LVQOL with 21 items is DIF-free and therefore seems highly appropriate for use in heterogeneous populations of visually impaired patients.

Item response theory analysis of the life orientation test-revised: age and gender differential item functioning analyses.

Science.gov (United States)

Steca, Patrizia; Monzani, Dario; Greco, Andrea; Chiesi, Francesca; Primi, Caterina

2015-06-01

This study is aimed at testing the measurement properties of the Life Orientation Test-Revised (LOT-R) for the assessment of dispositional optimism by employing item response theory (IRT) analyses. The LOT-R was administered to a large sample of 2,862 Italian adults. First, confirmatory factor analyses demonstrated the theoretical conceptualization of the construct measured by the LOT-R as a single bipolar dimension. Subsequently, IRT analyses for polytomous, ordered response category data were applied to investigate the items' properties. The equivalence of the items across gender and age was assessed by analyzing differential item functioning. Discrimination and severity parameters indicated that all items were able to distinguish people with different levels of optimism and adequately covered the spectrum of the latent trait. Additionally, the LOT-R appears to be gender invariant and, with minor exceptions, age invariant. Results provided evidence that the LOT-R is a reliable and valid measure of dispositional optimism. © The Author(s) 2014.

Technical Evaluation for the Determination of CGI Designation for Safety Class Items Incorporated in Hose-in-Hose Transfer Line Assemblies

International Nuclear Information System (INIS)

BUCHANAN, J.R.

2000-01-01

The purpose of this technical evaluation is to determine whether the secondary hoses are to be categorized as Commercial Grade Items (CGI) or Engineered Equipment. This determination will identify whether or not use of the CGI Dedication process is appropriate

Study of the optical properties of the DF2000MA daylight film used in the XENON1T muon veto water tank

Energy Technology Data Exchange (ETDEWEB)

Ramirez, Diego [Institut fuer Physik, Johannes Gutenberg-Universitaet Mainz (Germany)

2016-07-01

XENON1T is the 3rd stage of a series of experiments performed by the XENON collaboration for the direct detection of dark matter candidates, such as WIMPs. Its projected spin-independent WIMP-nucleon elastic scattering cross-section entails an improvement of two orders of magnitude with respect to Xenon100 and requires, for a fiducial mass of the detector of about 1 ton liquid xenon, a similar reduction in background. In order to minimize the neutron background induced by cosmic ray muons, the XENON1T TPC is placed in the center of a 750 m{sup 3} water tank acting as an active Cherenkov muon veto, the walls of which are clad with the high reflective DF2000MA foil by 3M. The improved setup and results of a dedicated study of the reflective properties of the foil is presented, as well as a measurement of its possible wavelength shifting (WLS) properties. The analysis yields a specular reflectance of ∼ 100% for wavelengths larger than 400 nm, while ∼ 90% of the incoming light with wavelengths smaller than 370 nm is absorbed by the foil. The emission spectra of the WLS are dependent on the absorbed wavelength and show Gaussian shapes, with highest intensities at mean values of ∼ 450 nm emission wavelength.

Software Note: Using BILOG for Fixed-Anchor Item Calibration

Science.gov (United States)

DeMars, Christine E.; Jurich, Daniel P.

2012-01-01

The nonequivalent groups anchor test (NEAT) design is often used to scale item parameters from two different test forms. A subset of items, called the anchor items or common items, are administered as part of both test forms. These items are used to adjust the item calibrations for any differences in the ability distributions of the groups taking…

Inventions on presenting textual items in Graphical User Interface

OpenAIRE

Mishra, Umakant

2014-01-01

Although a GUI largely replaces textual descriptions by graphical icons, the textual items are not completely removed. The textual items are inevitably used in window titles, message boxes, help items, menu items and popup items. Textual items are necessary for communicating messages that are beyond the limitation of graphical messages. However, it is necessary to harness the textual items on the graphical interface in such a way that they complement each other to produce the best effect. One...

Science Library of Test Items. Volume Eighteen. A Collection of Multiple Choice Test Items Relating Mainly to Chemistry.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Seventeen. A Collection of Multiple Choice Test Items Relating Mainly to Biology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Nineteen. A Collection of Multiple Choice Test Items Relating Mainly to Geology.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Feed mechanism and method for feeding minute items

Science.gov (United States)

Stringer, Timothy Kent [Bucyrus, KS; Yerganian, Simon Scott [Lee's Summit, MO

2009-10-20

A feeding mechanism and method for feeding minute items, such as capacitors, resistors, or solder preforms. The mechanism is adapted to receive a plurality of the randomly-positioned and randomly-oriented extremely small or minute items, and to isolate, orient, and position one or more of the items in a specific repeatable pickup location wherefrom they may be removed for use by, for example, a computer-controlled automated assembly machine. The mechanism comprises a sliding shelf adapted to receive and support the items; a wiper arm adapted to achieve a single even layer of the items; and a pushing arm adapted to push the items into the pickup location. The mechanism can be adapted for providing the items with a more exact orientation, and can also be adapted for use in a liquid environment.

Memory for Items and Relationships among Items Embedded in Realistic Scenes: Disproportionate Relational Memory Impairments in Amnesia

Science.gov (United States)

Hannula, Deborah E.; Tranel, Daniel; Allen, John S.; Kirchhoff, Brenda A.; Nickel, Allison E.; Cohen, Neal J.

2014-01-01

Objective The objective of this study was to examine the dependence of item memory and relational memory on medial temporal lobe (MTL) structures. Patients with amnesia, who either had extensive MTL damage or damage that was relatively restricted to the hippocampus, were tested, as was a matched comparison group. Disproportionate relational memory impairments were predicted for both patient groups, and those with extensive MTL damage were also expected to have impaired item memory. Method Participants studied scenes, and were tested with interleaved two-alternative forced-choice probe trials. Probe trials were either presented immediately after the corresponding study trial (lag 1), five trials later (lag 5), or nine trials later (lag 9) and consisted of the studied scene along with a manipulated version of that scene in which one item was replaced with a different exemplar (item memory test) or was moved to a new location (relational memory test). Participants were to identify the exact match of the studied scene. Results As predicted, patients were disproportionately impaired on the test of relational memory. Item memory performance was marginally poorer among patients with extensive MTL damage, but both groups were impaired relative to matched comparison participants. Impaired performance was evident at all lags, including the shortest possible lag (lag 1). Conclusions The results are consistent with the proposed role of the hippocampus in relational memory binding and representation, even at short delays, and suggest that the hippocampus may also contribute to successful item memory when items are embedded in complex scenes. PMID:25068665

Applying Hierarchical Model Calibration to Automatically Generated Items.

Science.gov (United States)

Williamson, David M.; Johnson, Matthew S.; Sinharay, Sandip; Bejar, Isaac I.

This study explored the application of hierarchical model calibration as a means of reducing, if not eliminating, the need for pretesting of automatically generated items from a common item model prior to operational use. Ultimately the successful development of automatic item generation (AIG) systems capable of producing items with highly similar…

41 CFR 101-27.404 - Review of items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Review of items. 101-27.404 Section 101-27.404 Public Contracts and Property Management Federal Property Management...-Elimination of Items From Inventory § 101-27.404 Review of items. Except for standby or reserve stocks, items...

Towards an authoring system for item construction

NARCIS (Netherlands)

Rikers, Jos H.A.N.

1988-01-01

The process of writing test items is analyzed, and a blueprint is presented for an authoring system for test item writing to reduce invalidity and to structure the process of item writing. The developmental methodology is introduced, and the first steps in the process are reported. A historical

Modeling Local Item Dependence in Cloze and Reading Comprehension Test Items Using Testlet Response Theory

Science.gov (United States)

Baghaei, Purya; Ravand, Hamdollah

2016-01-01

In this study the magnitudes of local dependence generated by cloze test items and reading comprehension items were compared and their impact on parameter estimates and test precision was investigated. An advanced English as a foreign language reading comprehension test containing three reading passages and a cloze test was analyzed with a…

10 CFR 835.605 - Labeling items and containers.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Labeling items and containers. 835.605 Section 835.605... items and containers. Except as provided at § 835.606, each item or container of radioactive material... information to permit individuals handling, using, or working in the vicinity of the items or containers to...

Obtaining a Proportional Allocation by Deleting Items

NARCIS (Netherlands)

Dorn, B.; de Haan, R.; Schlotter, I.; Röthe, J.

2017-01-01

We consider the following control problem on fair allocation of indivisible goods. Given a set I of items and a set of agents, each having strict linear preference over the items, we ask for a minimum subset of the items whose deletion guarantees the existence of a proportional allocation in the

Butterfly valve of all rubber lining type

International Nuclear Information System (INIS)

Shimada, Shosaku; Nakatsuma, Sumiya; Sasaki, Iwao; Aoki, Naoshi.

1982-01-01

The valves used for the circulating water pipes for condensers in nuclear and thermal power stations have become large with the increase of power output, and their specifications have become strict. The materials for the valves change from cast iron to steel plate construction. To cope with sea water corrosion, rubber lining has been applied to the internal surfaces of valve boxes, and the build-up welding of stainless steel has been made on the edges of valves. However, recently it is desired to develop butterfly valves, of which the whole valve disks are lined with hard rubber. For the purpose of confirming the performance of large bore valves, a 2600 mm bore butterfly valve of all rubber lining type was used, and the opening and closing test of 1100 times was carried out by applying thermal cycle and pressure difference and using artifical sea water. Also the bending test of hard rubber lining was performed with test pieces. Thus, it was confirmed that the butterfly valves of all rubber lining type have the performance exceeding that of the valves with build-up welding. The course of development of the valves of all rubber lining type, the construction and the items of confirmation by tests of these valves, and the tests of the valve and the hard rubber lining described above are reported. (Kako, I.)

Item-Based Top-N Recommendation Algorithms

Science.gov (United States)

2003-01-20

basket of items, utilized by many e-commerce sites, cannot take advantage of pre-computed user-to-user similarities. Finally, even though the...not discriminate between items that are present in frequent itemsets and items that are not, while still maintaining the computational advantages of...453219 0.02% 7.74 ccard 42629 68793 398619 0.01% 9.35 ecommerce 6667 17491 91222 0.08% 13.68 em 8002 1648 769311 5.83% 96.14 ml 943 1682 100000 6.31

A Review of Classical Methods of Item Analysis.

Science.gov (United States)

French, Christine L.

Item analysis is a very important consideration in the test development process. It is a statistical procedure to analyze test items that combines methods used to evaluate the important characteristics of test items, such as difficulty, discrimination, and distractibility of the items in a test. This paper reviews some of the classical methods for…

Electronics. Criterion-Referenced Test (CRT) Item Bank.

Science.gov (United States)

Davis, Diane, Ed.

This document contains 519 criterion-referenced multiple choice and true or false test items for a course in electronics. The test item bank is designed to work with both the Vocational Instructional Management System (VIMS) and the Vocational Administrative Management System (VAMS) in Missouri. The items are grouped into 15 units covering the…

26 CFR 301.6501(o)-3 - Partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Partnership items. 301.6501(o)-3 Section 301... § 301.6501(o)-3 Partnership items. (a) Partnership item defined. For purposes of section 6501(o) (as it..., and § 301.6511(g)-1, the term “partnership item” means— (1) Any item required to be taken into account...

A Balance Sheet for Educational Item Banking.

Science.gov (United States)

Hiscox, Michael D.

Educational item banking presents observers with a considerable paradox. The development of test items from scratch is viewed as wasteful, a luxury in times of declining resources. On the other hand, item banking has failed to become a mature technology despite large amounts of money and the efforts of talented professionals. The question of which…

Promoting cold-start items in recommender systems.

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs.

Promoting Cold-Start Items in Recommender Systems

Science.gov (United States)

Liu, Jin-Hu; Zhou, Tao; Zhang, Zi-Ke; Yang, Zimo; Liu, Chuang; Li, Wei-Min

2014-01-01

As one of the major challenges, cold-start problem plagues nearly all recommender systems. In particular, new items will be overlooked, impeding the development of new products online. Given limited resources, how to utilize the knowledge of recommender systems and design efficient marketing strategy for new items is extremely important. In this paper, we convert this ticklish issue into a clear mathematical problem based on a bipartite network representation. Under the most widely used algorithm in real e-commerce recommender systems, the so-called item-based collaborative filtering, we show that to simply push new items to active users is not a good strategy. Interestingly, experiments on real recommender systems indicate that to connect new items with some less active users will statistically yield better performance, namely, these new items will have more chance to appear in other users' recommendation lists. Further analysis suggests that the disassortative nature of recommender systems contributes to such observation. In a word, getting in-depth understanding on recommender systems could pave the way for the owners to popularize their cold-start products with low costs. PMID:25479013

Mixed-Format Test Score Equating: Effect of Item-Type Multidimensionality, Length and Composition of Common-Item Set, and Group Ability Difference

Science.gov (United States)

Wang, Wei

2013-01-01

Mixed-format tests containing both multiple-choice (MC) items and constructed-response (CR) items are now widely used in many testing programs. Mixed-format tests often are considered to be superior to tests containing only MC items although the use of multiple item formats leads to measurement challenges in the context of equating conducted under…

Negative affect impairs associative memory but not item memory.

Science.gov (United States)

Bisby, James A; Burgess, Neil

2013-12-17

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine the effects of emotion on memory for items and their associations. By presenting neutral and negative items with background contexts, Experiment 1 demonstrated that item memory was facilitated by emotional affect, whereas memory for an associated context was reduced. In Experiment 2, arousal was manipulated independently of the memoranda, by a threat of shock, whereby encoding trials occurred under conditions of threat or safety. Memory for context was equally impaired by the presence of negative affect, whether induced by threat of shock or a negative item, relative to retrieval of the context of a neutral item in safety. In Experiment 3, participants were presented with neutral and negative items as paired associates, including all combinations of neutral and negative items. The results showed both above effects: compared to a neutral item, memory for the associate of a negative item (a second item here, context in Experiments 1 and 2) is impaired, whereas retrieval of the item itself is enhanced. Our findings suggest that negative affect impairs associative memory while recognition of a negative item is enhanced. They support dual-processing models in which negative affect or stress impairs hippocampal-dependent associative memory while the storage of negative sensory/perceptual representations is spared or even strengthened.

Non-ignorable missingness item response theory models for choice effects in examinee-selected items.

Science.gov (United States)

Liu, Chen-Wei; Wang, Wen-Chung

2017-11-01

Examinee-selected item (ESI) design, in which examinees are required to respond to a fixed number of items in a given set, always yields incomplete data (i.e., when only the selected items are answered, data are missing for the others) that are likely non-ignorable in likelihood inference. Standard item response theory (IRT) models become infeasible when ESI data are missing not at random (MNAR). To solve this problem, the authors propose a two-dimensional IRT model that posits one unidimensional IRT model for observed data and another for nominal selection patterns. The two latent variables are assumed to follow a bivariate normal distribution. In this study, the mirt freeware package was adopted to estimate parameters. The authors conduct an experiment to demonstrate that ESI data are often non-ignorable and to determine how to apply the new model to the data collected. Two follow-up simulation studies are conducted to assess the parameter recovery of the new model and the consequences for parameter estimation of ignoring MNAR data. The results of the two simulation studies indicate good parameter recovery of the new model and poor parameter recovery when non-ignorable missing data were mistakenly treated as ignorable. © 2017 The British Psychological Society.

Using Logistic Approximations of Marginal Trace Lines to Develop Short Assessments

Science.gov (United States)

Stucky, Brian D.; Thissen, David; Edelen, Maria Orlando

2013-01-01

Test developers often need to create unidimensional scales from multidimensional data. For item analysis, "marginal trace lines" capture the relation with the general dimension while accounting for nuisance dimensions and may prove to be a useful technique for creating short-form tests. This article describes the computations needed to obtain…

A Case Study on an Item Writing Process: Use of Test Specifications, Nature of Group Dynamics, and Individual Item Writers' Characteristics

Science.gov (United States)

Kim, Jiyoung; Chi, Youngshin; Huensch, Amanda; Jun, Heesung; Li, Hongli; Roullion, Vanessa

2010-01-01

This article discusses a case study on an item writing process that reflects on our practical experience in an item development project. The purpose of the article is to share our lessons from the experience aiming to demystify item writing process. The study investigated three issues that naturally emerged during the project: how item writers use…

Automated Item Generation with Recurrent Neural Networks.

Science.gov (United States)

von Davier, Matthias

2018-03-12

Utilizing technology for automated item generation is not a new idea. However, test items used in commercial testing programs or in research are still predominantly written by humans, in most cases by content experts or professional item writers. Human experts are a limited resource and testing agencies incur high costs in the process of continuous renewal of item banks to sustain testing programs. Using algorithms instead holds the promise of providing unlimited resources for this crucial part of assessment development. The approach presented here deviates in several ways from previous attempts to solve this problem. In the past, automatic item generation relied either on generating clones of narrowly defined item types such as those found in language free intelligence tests (e.g., Raven's progressive matrices) or on an extensive analysis of task components and derivation of schemata to produce items with pre-specified variability that are hoped to have predictable levels of difficulty. It is somewhat unlikely that researchers utilizing these previous approaches would look at the proposed approach with favor; however, recent applications of machine learning show success in solving tasks that seemed impossible for machines not too long ago. The proposed approach uses deep learning to implement probabilistic language models, not unlike what Google brain and Amazon Alexa use for language processing and generation.

Science Library of Test Items. Volume Twenty-Two. A Collection of Multiple Choice Test Items Relating Mainly to Skills.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Science Library of Test Items. Volume Twenty. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 1.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Modeling Item-Level and Step-Level Invariance Effects in Polytomous Items Using the Partial Credit Model

Science.gov (United States)

Gattamorta, Karina A.; Penfield, Randall D.; Myers, Nicholas D.

2012-01-01

Measurement invariance is a common consideration in the evaluation of the validity and fairness of test scores when the tested population contains distinct groups of examinees, such as examinees receiving different forms of a translated test. Measurement invariance in polytomous items has traditionally been evaluated at the item-level,…

Item Information in the Rasch Model

NARCIS (Netherlands)

Engelen, Ron J.H.; van der Linden, Willem J.; Oosterloo, Sebe J.

1988-01-01

Fisher's information measure for the item difficulty parameter in the Rasch model and its marginal and conditional formulations are investigated. It is shown that expected item information in the unconditional model equals information in the marginal model, provided the assumption of sampling

Work ability as prognostic risk marker of disability pension : Single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, C.A.M.; Rhenen, van W.; Groothoff, J.W.; Klink, van der J.J.L.; Twisk, W.R.; Heymans, M.W.

2014-01-01

Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP.

CERN Running Club – Sale of Items

CERN Multimedia

CERN Running club

2018-01-01

The CERN Running Club is organising a sale of items  on 26 June from 11:30 – 13:00 in the entry area of Restaurant 2 (504 R-202). The items for sale are souvenir prizes of past Relay Races and comprise: Backpacks, thermos, towels, gloves & caps, lamps, long sleeve winter shirts and windproof vest. All items will be sold at 5 CHF.

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, C.A.M.; van Rhenen, W.; Groothoff, J.W.; van der Klink, J.J.L.; Twisk, J.W.R.; Heymans, M.W.

2014-01-01

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Work ability as prognostic risk marker of disability pension : single-item work ability score versus multi-item work ability index

NARCIS (Netherlands)

Roelen, Corne A. M.; van Rhenen, Willem; Groothoff, Johan W.; van der Klink, Jac J. L.; Twisk, Jos W. R.; Heymans, Martijn W.

Objectives Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. Methods This

Binomial test models and item difficulty

NARCIS (Netherlands)

van der Linden, Willem J.

1979-01-01

In choosing a binomial test model, it is important to know exactly what conditions are imposed on item difficulty. In this paper these conditions are examined for both a deterministic and a stochastic conception of item responses. It appears that they are more restrictive than is generally

Basic and substitute supply in the event of customer insolvency. The field between energy law and insolvency law, with due consideration to the unconstitutionality of the basic supply ordinances for electricity and gas; Grund- und Ersatzversorgung in der Insolvenz des Kunden. Das Spannungsfeld von Energie- und Insolvenzrecht unter Beruecksichtigung der Verfassungswidrigkeit der GVV fuer Strom und Gas

Energy Technology Data Exchange (ETDEWEB)

Barchewitz, Paul

2008-07-01

The author of this publication examines the legal relationships that arise between the parties involved if a customer receiving a basic or substitute energy supply runs into crisis and insolvency. The intent is to describe and assess the interplay between energy law and insolvency law. The author examines how far the obligations of the basic supplier reach in the event of customer insolvency, what means the customer, the (provisional) insolvency administrator and the basic supplier have at their disposal in this situation and how these might assessed from a legal and economic viewpoint. Special emphasis is placed on the partial unconstitutionality of the basic supply ordinances for electricity and gas. These laws should also specify the parties' obligations and rights in the event of insolvency.

Vegetable parenting practices scale: Item response modeling analyses

Science.gov (United States)

Our objective was to evaluate the psychometric properties of a vegetable parenting practices scale using multidimensional polytomous item response modeling which enables assessing item fit to latent variables and the distributional characteristics of the items in comparison to the respondents. We al...

Efficient Algorithms for Segmentation of Item-Set Time Series

Science.gov (United States)

Chundi, Parvathi; Rosenkrantz, Daniel J.

We propose a special type of time series, which we call an item-set time series, to facilitate the temporal analysis of software version histories, email logs, stock market data, etc. In an item-set time series, each observed data value is a set of discrete items. We formalize the concept of an item-set time series and present efficient algorithms for segmenting a given item-set time series. Segmentation of a time series partitions the time series into a sequence of segments where each segment is constructed by combining consecutive time points of the time series. Each segment is associated with an item set that is computed from the item sets of the time points in that segment, using a function which we call a measure function. We then define a concept called the segment difference, which measures the difference between the item set of a segment and the item sets of the time points in that segment. The segment difference values are required to construct an optimal segmentation of the time series. We describe novel and efficient algorithms to compute segment difference values for each of the measure functions described in the paper. We outline a dynamic programming based scheme to construct an optimal segmentation of the given item-set time series. We use the item-set time series segmentation techniques to analyze the temporal content of three different data sets—Enron email, stock market data, and a synthetic data set. The experimental results show that an optimal segmentation of item-set time series data captures much more temporal content than a segmentation constructed based on the number of time points in each segment, without examining the item set data at the time points, and can be used to analyze different types of temporal data.

Overview of Classical Test Theory and Item Response Theory for Quantitative Assessment of Items in Developing Patient-Reported Outcome Measures

Science.gov (United States)

Cappelleri, Joseph C.; Lundy, J. Jason; Hays, Ron D.

2014-01-01

Introduction The U.S. Food and Drug Administration’s patient-reported outcome (PRO) guidance document defines content validity as “the extent to which the instrument measures the concept of interest” (FDA, 2009, p. 12). “Construct validity is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity” (Strauss & Smith, 2009, p. 7). Hence both qualitative and quantitative information are essential in evaluating the validity of measures. Methods We review classical test theory and item response theory approaches to evaluating PRO measures including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized “difficulty” (severity) order of items is represented by observed responses. Conclusion Classical test theory and item response theory can be useful in providing a quantitative assessment of items and scales during the content validity phase of patient-reported outcome measures. Depending on the particular type of measure and the specific circumstances, either one or both approaches should be considered to help maximize the content validity of PRO measures. PMID:24811753

Sources of interference in item and associative recognition memory.

Science.gov (United States)

Osth, Adam F; Dennis, Simon

2015-04-01

A powerful theoretical framework for exploring recognition memory is the global matching framework, in which a cue's memory strength reflects the similarity of the retrieval cues being matched against the contents of memory simultaneously. Contributions at retrieval can be categorized as matches and mismatches to the item and context cues, including the self match (match on item and context), item noise (match on context, mismatch on item), context noise (match on item, mismatch on context), and background noise (mismatch on item and context). We present a model that directly parameterizes the matches and mismatches to the item and context cues, which enables estimation of the magnitude of each interference contribution (item noise, context noise, and background noise). The model was fit within a hierarchical Bayesian framework to 10 recognition memory datasets that use manipulations of strength, list length, list strength, word frequency, study-test delay, and stimulus class in item and associative recognition. Estimates of the model parameters revealed at most a small contribution of item noise that varies by stimulus class, with virtually no item noise for single words and scenes. Despite the unpopularity of background noise in recognition memory models, background noise estimates dominated at retrieval across nearly all stimulus classes with the exception of high frequency words, which exhibited equivalent levels of context noise and background noise. These parameter estimates suggest that the majority of interference in recognition memory stems from experiences acquired before the learning episode. (c) 2015 APA, all rights reserved).

CTTITEM: SAS macro and SPSS syntax for classical item analysis.

Science.gov (United States)

Lei, Pui-Wa; Wu, Qiong

2007-08-01

This article describes the functions of a SAS macro and an SPSS syntax that produce common statistics for conventional item analysis including Cronbach's alpha, item difficulty index (p-value or item mean), and item discrimination indices (D-index, point biserial and biserial correlations for dichotomous items and item-total correlation for polytomous items). These programs represent an improvement over the existing SAS and SPSS item analysis routines in terms of completeness and user-friendliness. To promote routine evaluations of item qualities in instrument development of any scale, the programs are available at no charge for interested users. The program codes along with a brief user's manual that contains instructions and examples are downloadable from suen.ed.psu.edu/-pwlei/plei.htm.

Three controversies over item disclosure in medical licensure examinations

Directory of Open Access Journals (Sweden)

Yoon Soo Park

2015-09-01

Full Text Available In response to views on public's right to know, there is growing attention to item disclosure – release of items, answer keys, and performance data to the public – in medical licensure examinations and their potential impact on the test's ability to measure competence and select qualified candidates. Recent debates on this issue have sparked legislative action internationally, including South Korea, with prior discussions among North American countries dating over three decades. The purpose of this study is to identify and analyze three issues associated with item disclosure in medical licensure examinations – 1 fairness and validity, 2 impact on passing levels, and 3 utility of item disclosure – by synthesizing existing literature in relation to standards in testing. Historically, the controversy over item disclosure has centered on fairness and validity. Proponents of item disclosure stress test takers’ right to know, while opponents argue from a validity perspective. Item disclosure may bias item characteristics, such as difficulty and discrimination, and has consequences on setting passing levels. To date, there has been limited research on the utility of item disclosure for large scale testing. These issues requires ongoing and careful consideration.

Method of data mining including determining multidimensional coordinates of each item using a predetermined scalar similarity value for each item pair

Science.gov (United States)

Meyers, Charles E.; Davidson, George S.; Johnson, David K.; Hendrickson, Bruce A.; Wylie, Brian N.

1999-01-01

A method of data mining represents related items in a multidimensional space. Distance between items in the multidimensional space corresponds to the extent of relationship between the items. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the items.

Guide to good practices for the development of test items

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-01-01

While the methodology used in developing test items can vary significantly, to ensure quality examinations, test items should be developed systematically. Test design and development is discussed in the DOE Guide to Good Practices for Design, Development, and Implementation of Examinations. This guide is intended to be a supplement by providing more detailed guidance on the development of specific test items. This guide addresses the development of written examination test items primarily. However, many of the concepts also apply to oral examinations, both in the classroom and on the job. This guide is intended to be used as guidance for the classroom and laboratory instructor or curriculum developer responsible for the construction of individual test items. This document focuses on written test items, but includes information relative to open-reference (open book) examination test items, as well. These test items have been categorized as short-answer, multiple-choice, or essay. Each test item format is described, examples are provided, and a procedure for development is included. The appendices provide examples for writing test items, a test item development form, and examples of various test item formats.

38 CFR 3.1606 - Transportation items.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Transportation items. 3... Burial Benefits § 3.1606 Transportation items. The transportation costs of those persons who come within... shipment. (6) Cost of transportation by common carrier including amounts paid as Federal taxes. (7) Cost of...

Assessing difference between classical test theory and item ...

African Journals Online (AJOL)

Assessing difference between classical test theory and item response theory methods in scoring primary four multiple choice objective test items. ... All research participants were ranked on the CTT number correct scores and the corresponding IRT item pattern scores from their performance on the PRISMADAT. Wilcoxon ...

The basics of item response theory using R

CERN Document Server

Baker, Frank B

2017-01-01

This graduate-level textbook is a tutorial for item response theory that covers both the basics of item response theory and the use of R for preparing graphical presentation in writings about the theory. Item response theory has become one of the most powerful tools used in test construction, yet one of the barriers to learning and applying it is the considerable amount of sophisticated computational effort required to illustrate even the simplest concepts. This text provides the reader access to the basic concepts of item response theory freed of the tedious underlying calculations. It is intended for those who possess limited knowledge of educational measurement and psychometrics. Rather than presenting the full scope of item response theory, this textbook is concise and practical and presents basic concepts without becoming enmeshed in underlying mathematical and computational complexities. Clearly written text and succinct R code allow anyone familiar with statistical concepts to explore and apply item re...

Science Library of Test Items. Volume Twenty-One. A Collection of Multiple Choice Test Items Relating Mainly to Physics, 2.

Science.gov (United States)

New South Wales Dept. of Education, Sydney (Australia).

As one in a series of test item collections developed by the Assessment and Evaluation Unit of the Directorate of Studies, items are made available to teachers for the construction of unit tests or term examinations or as a basis for class discussion. Each collection was reviewed for content validity and reliability. The test items meet syllabus…

Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning

DEFF Research Database (Denmark)

Watt, Torquil; Grønvold, Mogens; Hegedüs, Laszlo

2014-01-01

To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis.......To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis....

Effect of Differential Item Functioning on Test Equating

Science.gov (United States)

Kabasakal, Kübra Atalay; Kelecioglu, Hülya

2015-01-01

This study examines the effect of differential item functioning (DIF) items on test equating through multilevel item response models (MIRMs) and traditional IRMs. The performances of three different equating models were investigated under 24 different simulation conditions, and the variables whose effects were examined included sample size, test…

Item bias detection in the Hospital Anxiety and Depression Scale using structural equation modeling: comparison with other item bias detection methods

NARCIS (Netherlands)

Verdam, M.G.E.; Oort, F.J.; Sprangers, M.A.G.

Purpose Comparison of patient-reported outcomes may be invalidated by the occurrence of item bias, also known as differential item functioning. We show two ways of using structural equation modeling (SEM) to detect item bias: (1) multigroup SEM, which enables the detection of both uniform and

Calibration of Automatically Generated Items Using Bayesian Hierarchical Modeling.

Science.gov (United States)

Johnson, Matthew S.; Sinharay, Sandip

For complex educational assessments, there is an increasing use of "item families," which are groups of related items. However, calibration or scoring for such an assessment requires fitting models that take into account the dependence structure inherent among the items that belong to the same item family. C. Glas and W. van der Linden…

ACER Chemistry Test Item Collection. ACER Chemtic Year 12.

Science.gov (United States)

Australian Council for Educational Research, Hawthorn.

The chemistry test item banks contains 225 multiple-choice questions suitable for diagnostic and achievement testing; a three-page teacher's guide; answer key with item facilities; an answer sheet; and a 45-item sample achievement test. Although written for the new grade 12 chemistry course in Victoria, Australia, the items are widely applicable.…

Counterfeit and Fraudulent Items - Mitigating the risk

International Nuclear Information System (INIS)

Tannenbaum, Marc

2011-01-01

This presentation (slides) provides an overview of the industry's challenges and activities. Firstly, it outlines the differences between counterfeit, fraudulent, suspect, and also substandard items. Notice is given that items could be found not to meet the standard, but the difference in the intent to deceive with counterfeit and fraudulent items is the critical element. Examples from other industries are used which also rely heavily on the assurance of quality for safety. It also informs that EPRI has just completed a report in October 2009 in coordination with other US government agencies and industry organizations; this report, entitled Counterfeit, Substandard and Fraudulent Items, number 1019163, is available for free on the EPRI web site. As a follow-up to this report, EPRI is developing a CFSI Database; any country interested in a collaborative agreement is invited to use and contribute to the database information. Finally, it stresses the importance of the oversight of contractors, training to raise the awareness of the employees and the inspectors, and having a response plan for identified items

Utilizing Response Time Distributions for Item Selection in CAT

Science.gov (United States)

Fan, Zhewen; Wang, Chun; Chang, Hua-Hua; Douglas, Jeffrey

2012-01-01

Traditional methods for item selection in computerized adaptive testing only focus on item information without taking into consideration the time required to answer an item. As a result, some examinees may receive a set of items that take a very long time to finish, and information is not accrued as efficiently as possible. The authors propose two…

Item analysis and evaluation in the examinations in the faculty of ...

African Journals Online (AJOL)

2014-11-05

Nov 5, 2014 ... Key words: Classical test theory, item analysis, item difficulty, item discrimination, item response theory, reliability ... the probability of answering an item correctly or of attaining ..... A Monte Carlo comparison of item and person.

Are great apes able to reason from multi-item samples to populations of food items?

Science.gov (United States)

Eckert, Johanna; Rakoczy, Hannes; Call, Josep

2017-10-01

Inductive learning from limited observations is a cognitive capacity of fundamental importance. In humans, it is underwritten by our intuitive statistics, the ability to draw systematic inferences from populations to randomly drawn samples and vice versa. According to recent research in cognitive development, human intuitive statistics develops early in infancy. Recent work in comparative psychology has produced first evidence for analogous cognitive capacities in great apes who flexibly drew inferences from populations to samples. In the present study, we investigated whether great apes (Pongo abelii, Pan troglodytes, Pan paniscus, Gorilla gorilla) also draw inductive inferences in the opposite direction, from samples to populations. In two experiments, apes saw an experimenter randomly drawing one multi-item sample from each of two populations of food items. The populations differed in their proportion of preferred to neutral items (24:6 vs. 6:24) but apes saw only the distribution of food items in the samples that reflected the distribution of the respective populations (e.g., 4:1 vs. 1:4). Based on this observation they were then allowed to choose between the two populations. Results show that apes seemed to make inferences from samples to populations and thus chose the population from which the more favorable (4:1) sample was drawn in Experiment 1. In this experiment, the more attractive sample not only contained proportionally but also absolutely more preferred food items than the less attractive sample. Experiment 2, however, revealed that when absolute and relative frequencies were disentangled, apes performed at chance level. Whether these limitations in apes' performance reflect true limits of cognitive competence or merely performance limitations due to accessory task demands is still an open question. © 2017 Wiley Periodicals, Inc.

An NCME Instructional Module on Polytomous Item Response Theory Models

Science.gov (United States)

Penfield, Randall David

2014-01-01

A polytomous item is one for which the responses are scored according to three or more categories. Given the increasing use of polytomous items in assessment practices, item response theory (IRT) models specialized for polytomous items are becoming increasingly common. The purpose of this ITEMS module is to provide an accessible overview of…

41 CFR 101-27.204 - Types of shelf-life items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Types of shelf-life items...-Management of Shelf-Life Materials § 101-27.204 Types of shelf-life items. Shelf-life items are classified as nonextendable (Type I) and extendable (Type II). Type I items have a definite storage life after which the item...

Constructing the 32-item Fitness-to-Drive Screening Measure.

Science.gov (United States)

Medhizadah, Shabnam; Classen, Sherrilene; Johnson, Andrew M

2018-04-01

The Fitness-to-Drive Screening Measure © (FTDS) enables proxies to identify at-risk older drivers via 54 driving-related items, but may be too lengthy for widespread uptake. We reduced the number of items in the FTDS and validated the shorter measure, using 200 caregiver responses. Exploratory factor analysis and classical test theory techniques were used to determine the most interpretable factor model and the minimum number of items to be used for predicting fitness to drive. The extent to which the shorter FTDS predicted the results of the 54-item FTDS was evaluated through correlational analysis. A three-factor model best represented the empirical data. Classical test theory techniques lead to the development of the 32-item FTDS. The 32-item FTDS was highly correlated ( r = .99, p = .05) with the FTDS. The 32-item FTDS may provide raters with a faster and more efficient way to identify at-risk older drivers.

Tailored Cloze: Improved with Classical Item Analysis Techniques.

Science.gov (United States)

Brown, James Dean

1988-01-01

The reliability and validity of a cloze procedure used as an English-as-a-second-language (ESL) test in China were improved by applying traditional item analysis and selection techniques. The 'best' test items were chosen on the basis of item facility and discrimination indices, and were administered as a 'tailored cloze.' 29 references listed.…

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Directory of Open Access Journals (Sweden)

Suttida Rakkapao

2016-10-01

Full Text Available This study investigated the multiple-choice test of understanding of vectors (TUV, by applying item response theory (IRT. The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test’s distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Analysis test of understanding of vectors with the three-parameter logistic model of item response theory and item response curves technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-12-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming unidimensionality and local independence. Moreover, all distractors of the TUV were analyzed from item response curves (IRC) that represent simplified IRT. Data were gathered on 2392 science and engineering freshmen, from three universities in Thailand. The results revealed IRT analysis to be useful in assessing the test since its item parameters are independent of the ability parameters. The IRT framework reveals item-level information, and indicates appropriate ability ranges for the test. Moreover, the IRC analysis can be used to assess the effectiveness of the test's distractors. Both IRT and IRC approaches reveal test characteristics beyond those revealed by the classical analysis methods of tests. Test developers can apply these methods to diagnose and evaluate the features of items at various ability levels of test takers.

Visual coherence for large-scale line-plot visualizations

KAUST Repository

Muigg, Philipp

2011-06-01

Displaying a large number of lines within a limited amount of screen space is a task that is common to many different classes of visualization techniques such as time-series visualizations, parallel coordinates, link-node diagrams, and phase-space diagrams. This paper addresses the challenging problems of cluttering and overdraw inherent to such visualizations. We generate a 2x2 tensor field during line rasterization that encodes the distribution of line orientations through each image pixel. Anisotropic diffusion of a noise texture is then used to generate a dense, coherent visualization of line orientation. In order to represent features of different scales, we employ a multi-resolution representation of the tensor field. The resulting technique can easily be applied to a wide variety of line-based visualizations. We demonstrate this for parallel coordinates, a time-series visualization, and a phase-space diagram. Furthermore, we demonstrate how to integrate a focus+context approach by incorporating a second tensor field. Our approach achieves interactive rendering performance for large data sets containing millions of data items, due to its image-based nature and ease of implementation on GPUs. Simulation results from computational fluid dynamics are used to evaluate the performance and usefulness of the proposed method. © 2011 The Author(s).

Visual coherence for large-scale line-plot visualizations

KAUST Repository

Muigg, Philipp; Hadwiger, Markus; Doleisch, Helmut; Grö ller, Eduard M.

2011-01-01

Displaying a large number of lines within a limited amount of screen space is a task that is common to many different classes of visualization techniques such as time-series visualizations, parallel coordinates, link-node diagrams, and phase-space diagrams. This paper addresses the challenging problems of cluttering and overdraw inherent to such visualizations. We generate a 2x2 tensor field during line rasterization that encodes the distribution of line orientations through each image pixel. Anisotropic diffusion of a noise texture is then used to generate a dense, coherent visualization of line orientation. In order to represent features of different scales, we employ a multi-resolution representation of the tensor field. The resulting technique can easily be applied to a wide variety of line-based visualizations. We demonstrate this for parallel coordinates, a time-series visualization, and a phase-space diagram. Furthermore, we demonstrate how to integrate a focus+context approach by incorporating a second tensor field. Our approach achieves interactive rendering performance for large data sets containing millions of data items, due to its image-based nature and ease of implementation on GPUs. Simulation results from computational fluid dynamics are used to evaluate the performance and usefulness of the proposed method. © 2011 The Author(s).

41 CFR 101-26.605 - Items other than petroleum products and electronic items available from the Defense Logistics...

Science.gov (United States)

2010-07-01

... petroleum products and electronic items available from the Defense Logistics Agency. 101-26.605 Section 101... available from the Defense Logistics Agency. Agencies required to use GSA supply sources should also use... Logistics Agency, the catalog will contain only those items in Federal supply classification classes which...

Extending item response theory to online homework

Directory of Open Access Journals (Sweden)

Gerd Kortemeyer

2014-05-01

Full Text Available Item response theory (IRT becomes an increasingly important tool when analyzing “big data” gathered from online educational venues. However, the mechanism was originally developed in traditional exam settings, and several of its assumptions are infringed upon when deployed in the online realm. For a large-enrollment physics course for scientists and engineers, the study compares outcomes from IRT analyses of exam and homework data, and then proceeds to investigate the effects of each confounding factor introduced in the online realm. It is found that IRT yields the correct trends for learner ability and meaningful item parameters, yet overall agreement with exam data is moderate. It is also found that learner ability and item discrimination is robust over a wide range with respect to model assumptions and introduced noise. Item difficulty is also robust, but over a narrower range.

Editorial Changes and Item Performance: Implications for Calibration and Pretesting

Directory of Open Access Journals (Sweden)

Heather Stoffel

2014-11-01

Full Text Available Previous research on the impact of text and formatting changes on test-item performance has produced mixed results. This matter is important because it is generally acknowledged that any change to an item requires that it be recalibrated. The present study investigated the effects of seven classes of stylistic changes on item difficulty, discrimination, and response time for a subset of 65 items that make up a standardized test for physician licensure completed by 31,918 examinees in 2012. One of two versions of each item (original or revised was randomly assigned to examinees such that each examinee saw only two experimental items, with each item being administered to approximately 480 examinees. The stylistic changes had little or no effect on item difficulty or discrimination; however, one class of edits -' changing an item from an open lead-in (incomplete statement to a closed lead-in (direct question -' did result in slightly longer response times. Data for nonnative speakers of English were analyzed separately with nearly identical results. These findings have implications for the conventional practice of repretesting (or recalibrating items that have been subjected to minor editorial changes.

Item response theory analysis of Centers for Disease Control and Prevention Health-Related Quality of Life (CDC HRQOL) items in adults with arthritis.

Science.gov (United States)

Mielenz, Thelma J; Callahan, Leigh F; Edwards, Michael C

2016-03-12

Examine the feasibility of performing an item response theory (IRT) analysis on two of the Centers for Disease Control and Prevention health-related quality of life (CDC HRQOL) modules - the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM). Previous principal components analyses confirm that the two scales both assess a mix of mental (CDC-MH) and physical health (CDC-PH). The purpose is to conduct item response theory (IRT) analysis on the CDC-MH and CDC-PH scales separately. 2182 patients with self-reported or physician-diagnosed arthritis completed a cross-sectional survey including HDCM and HDSM items. Besides global health, the other 8 items ask the number of days that some statement was true; we chose to recode the data into 8 categories based on observed clustering. The IRT assumptions were assessed using confirmatory factor analysis and the data could be modeled using an unidimensional IRT model. The graded response model was used for IRT analyses and CDC-MH and CDC-PH scales were analyzed separately in flexMIRT. The IRT parameter estimates for the five-item CDC-PH all appeared reasonable. The three-item CDC-MH did not have reasonable parameter estimates. The CDC-PH scale is amenable to IRT analysis but the existing The CDC-MH scale is not. We suggest either using the 4-item Healthy Days Core Module (HDCM) and the 5-item Healthy days Symptoms Module (HDSM) as they currently stand or the CDC-PH scale alone if the primary goal is to measure physical health related HRQOL.

On multidimensional item response theory -- a coordinate free approach

OpenAIRE

Antal, Tamás

2007-01-01

A coordinate system free definition of complex structure multidimensional item response theory (MIRT) for dichotomously scored items is presented. The point of view taken emphasizes the possibilities and subtleties of understanding MIRT as a multidimensional extension of the ``classical'' unidimensional item response theory models. The main theorem of the paper is that every monotonic MIRT model looks the same; they are all trivial extensions of univariate item response theory.

Verification of Differential Item Functioning (DIF) Status of West ...

African Journals Online (AJOL)

This study investigated test item bias and Differential Item Functioning (DIF) of West African ... items in chemistry function differentially with respect to gender and location. In Aba education zone of Abia, 50 secondary schools were purposively ...

Mixture Item Response Theory-MIMIC Model: Simultaneous Estimation of Differential Item Functioning for Manifest Groups and Latent Classes

Science.gov (United States)

Bilir, Mustafa Kuzey

2009-01-01

This study uses a new psychometric model (mixture item response theory-MIMIC model) that simultaneously estimates differential item functioning (DIF) across manifest groups and latent classes. Current DIF detection methods investigate DIF from only one side, either across manifest groups (e.g., gender, ethnicity, etc.), or across latent classes…

Understanding and quantifying cognitive complexity level in mathematical problem solving items

Directory of Open Access Journals (Sweden)

SUSAN E. EMBRETSON

2008-09-01

Full Text Available The linear logistic test model (LLTM; Fischer, 1973 has been applied to a wide variety of new tests. When the LLTM application involves item complexity variables that are both theoretically interesting and empirically supported, several advantages can result. These advantages include elaborating construct validity at the item level, defining variables for test design, predicting parameters of new items, item banking by sources of complexity and providing a basis for item design and item generation. However, despite the many advantages of applying LLTM to test items, it has been applied less often to understand the sources of complexity for large-scale operational test items. Instead, previously calibrated item parameters are modeled using regression techniques because raw item response data often cannot be made available. In the current study, both LLTM and regression modeling are applied to mathematical problem solving items from a widely used test. The findings from the two methods are compared and contrasted for their implications for continued development of ability and achievement tests based on mathematical problem solving items.

Improved Approximation Algorithms for Item Pricing with Bounded Degree and Valuation

Science.gov (United States)

Hamane, Ryoso; Itoh, Toshiya

When a store sells items to customers, the store wishes to decide the prices of the items to maximize its profit. If the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. It would be hard for the store to decide the prices of items. Assume that a store has a set V of n items and there is a set C of m customers who wish to buy those items. The goal of the store is to decide the price of each item to maximize its profit. We refer to this maximization problem as an item pricing problem. We classify the item pricing problems according to how many items the store can sell or how the customers valuate the items. If the store can sell every item i with unlimited (resp. limited) amount, we refer to this as unlimited supply (resp. limited supply). We say that the item pricing problem is single-minded if each customer j∈C wishes to buy a set ej⊆V of items and assigns valuation w(ej)≥0. For the single-minded item pricing problems (in unlimited supply), Balcan and Blum regarded them as weighted k-hypergraphs and gave several approximation algorithms. In this paper, we focus on the (pseudo) degree of k-hypergraphs and the valuation ratio, i. e., the ratio between the smallest and the largest valuations. Then for the single-minded item pricing problems (in unlimited supply), we show improved approximation algorithms (for k-hypergraphs, general graphs, bipartite graphs, etc.) with respect to the maximum (pseudo) degree and the valuation ratio.

Item-level factor analysis of the Self-Efficacy Scale.

Science.gov (United States)

Bunketorp Käll, Lina

2014-03-01

This study explores the internal structure of the Self-Efficacy Scale (SES) using item response analysis. The SES was previously translated into Swedish and modified to encompass all types of pain, not exclusively back pain. Data on perceived self-efficacy in 47 patients with subacute whiplash-associated disorders were derived from a previously conducted randomized-controlled trial. The item-level factor analysis was carried out using a six-step procedure. To further study the item inter-relationships and to determine the underlying structure empirically, the 20 items of the SES were also subjected to principal component analysis with varimax rotation. The analyses showed two underlying factors, named 'social activities' and 'physical activities', with seven items loading on each factor. The remaining six items of the SES appeared to measure somewhat different constructs and need to be analysed further.

Better assessment of physical function: item improvement is neglected but essential.

Science.gov (United States)

Bruce, Bonnie; Fries, James F; Ambrosini, Debbie; Lingala, Bharathi; Gandek, Barbara; Rose, Matthias; Ware, John E

2009-01-01

Physical function is a key component of patient-reported outcome (PRO) assessment in rheumatology. Modern psychometric methods, such as Item Response Theory (IRT) and Computerized Adaptive Testing, can materially improve measurement precision at the item level. We present the qualitative and quantitative item-evaluation process for developing the Patient Reported Outcomes Measurement Information System (PROMIS) Physical Function item bank. The process was stepwise: we searched extensively to identify extant Physical Function items and then classified and selectively reduced the item pool. We evaluated retained items for content, clarity, relevance and comprehension, reading level, and translation ease by experts and patient surveys, focus groups, and cognitive interviews. We then assessed items by using classic test theory and IRT, used confirmatory factor analyses to estimate item parameters, and graded response modeling for parameter estimation. We retained the 20 Legacy (original) Health Assessment Questionnaire Disability Index (HAQ-DI) and the 10 SF-36's PF-10 items for comparison. Subjects were from rheumatoid arthritis, osteoarthritis, and healthy aging cohorts (n = 1,100) and a national Internet sample of 21,133 subjects. We identified 1,860 items. After qualitative and quantitative evaluation, 124 newly developed PROMIS items composed the PROMIS item bank, which included revised Legacy items with good fit that met IRT model assumptions. Results showed that the clearest and best-understood items were simple, in the present tense, and straightforward. Basic tasks (like dressing) were more relevant and important versus complex ones (like dancing). Revised HAQ-DI and PF-10 items with five response options had higher item-information content than did comparable original Legacy items with fewer response options. IRT analyses showed that the Physical Function domain satisfied general criteria for unidimensionality with one-, two-, three-, and four-factor models

Negative affect impairs associative memory but not item memory.

OpenAIRE

Bisby, J. A.; Burgess, N.

2014-01-01

The formation of associations between items and their context has been proposed to rely on mechanisms distinct from those supporting memory for a single item. Although emotional experiences can profoundly affect memory, our understanding of how it interacts with different aspects of memory remains unclear. We performed three experiments to examine the effects of emotion on memory for items and their associations. By presenting neutral and negative items with background contexts, Experiment 1 ...

Hazardous metals in yellow items used in RCAs

International Nuclear Information System (INIS)

Brown, K.F.; Rankin, W.N.

1992-01-01

Yellow items used in Radiologically Controlled Areas (RCAs) that could contain hazardous metals were identified. X-ray fluorescence analyses indicated that thirty of the fifty-two items do contain hazardous metals. It is important to minimize the hazardous metals put into the wastes. The authors recommend that the specifications for all yellow items stocked in Stores be changed to specify that they contain no hazardous metals

Evaluating the Psychometric Characteristics of Generated Multiple-Choice Test Items

Science.gov (United States)

Gierl, Mark J.; Lai, Hollis; Pugh, Debra; Touchie, Claire; Boulais, André-Philippe; De Champlain, André

2016-01-01

Item development is a time- and resource-intensive process. Automatic item generation integrates cognitive modeling with computer technology to systematically generate test items. To date, however, items generated using cognitive modeling procedures have received limited use in operational testing situations. As a result, the psychometric…

Can Item Keyword Feedback Help Remediate Knowledge Gaps?

Science.gov (United States)

Feinberg, Richard A; Clauser, Amanda L

2016-10-01

In graduate medical education, assessment results can effectively guide professional development when both assessment and feedback support a formative model. When individuals cannot directly access the test questions and responses, a way of using assessment results formatively is to provide item keyword feedback. The purpose of the following study was to investigate whether exposure to item keyword feedback aids in learner remediation. Participants included 319 trainees who completed a medical subspecialty in-training examination (ITE) in 2012 as first-year fellows, and then 1 year later in 2013 as second-year fellows. Performance on 2013 ITE items in which keywords were, or were not, exposed as part of the 2012 ITE score feedback was compared across groups based on the amount of time studying (preparation). For the same items common to both 2012 and 2013 ITEs, response patterns were analyzed to investigate changes in answer selection. Test takers who indicated greater amounts of preparation on the 2013 ITE did not perform better on the items in which keywords were exposed compared to those who were not exposed. The response pattern analysis substantiated overall growth in performance from the 2012 ITE. For items with incorrect responses on both attempts, examinees selected the same option 58% of the time. Results from the current study were unsuccessful in supporting the use of item keywords in aiding remediation. Unfortunately, the results did provide evidence of examinees retaining misinformation.

Method using a density field for locating related items for data mining

Science.gov (United States)

Wylie, Brian N.

2002-01-01

A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method makes use of numeric values as a measure of similarity between each pairing of items. The items are given initial coordinates in the space. An energy is then determined for each item from the item's distance and similarity to other items, and from the density of items assigned coordinates near the item. The distance and similarity component can act to draw items with high similarities close together, while the density component can act to force all items apart. If a terminal condition is not yet reached, then new coordinates can be determined for one or more items, and the energy determination repeated. The iteration can terminate, for example, when the total energy reaches a threshold, when each item's energy is below a threshold, after a certain amount of time or iterations.

Maintenance of item and order information in verbal working memory.

Science.gov (United States)

Camos, Valérie; Lagner, Prune; Loaiza, Vanessa M

2017-09-01

Although verbal recall of item and order information is well-researched in short-term memory paradigms, there is relatively little research concerning item and order recall from working memory. The following study examined whether manipulating the opportunity for attentional refreshing and articulatory rehearsal in a complex span task differently affected the recall of item- and order-specific information of the memoranda. Five experiments varied the opportunity for articulatory rehearsal and attentional refreshing in a complex span task, but the type of recall was manipulated between experiments (item and order, order only, and item only recall). The results showed that impairing attentional refreshing and articulatory rehearsal similarly affected recall regardless of whether the scoring procedure (Experiments 1 and 4) or recall requirements (Experiments 2, 3, and 5) reflected item- or order-specific recall. This implies that both mechanisms sustain the maintenance of item and order information, and suggests that the common cumulative functioning of these two mechanisms to maintain items could be at the root of order maintenance.

Do people with and without medical conditions respond similarly to the short health anxiety inventory? An assessment of differential item functioning using item response theory.

Science.gov (United States)

LeBouthillier, Daniel M; Thibodeau, Michel A; Alberts, Nicole M; Hadjistavropoulos, Heather D; Asmundson, Gordon J G

2015-04-01

Individuals with medical conditions are likely to have elevated health anxiety; however, research has not demonstrated how medical status impacts response patterns on health anxiety measures. Measurement bias can undermine the validity of a questionnaire by overestimating or underestimating scores in groups of individuals. We investigated whether the Short Health Anxiety Inventory (SHAI), a widely-used measure of health anxiety, exhibits medical condition-based bias on item and subscale levels, and whether the SHAI subscales adequately assess the health anxiety continuum. Data were from 963 individuals with diabetes, breast cancer, or multiple sclerosis, and 372 healthy individuals. Mantel-Haenszel tests and item characteristic curves were used to classify the severity of item-level differential item functioning in all three medical groups compared to the healthy group. Test characteristic curves were used to assess scale-level differential item functioning and whether the SHAI subscales adequately assess the health anxiety continuum. Nine out of 14 items exhibited differential item functioning. Two items exhibited differential item functioning in all medical groups compared to the healthy group. In both Thought Intrusion and Fear of Illness subscales, differential item functioning was associated with mildly deflated scores in medical groups with very high levels of the latent traits. Fear of Illness items poorly discriminated between individuals with low and very low levels of the latent trait. While individuals with medical conditions may respond differentially to some items, clinicians and researchers can confidently use the SHAI with a variety of medical populations without concern of significant bias. Copyright © 2015 Elsevier Inc. All rights reserved.

Comparison on Computed Tomography using industrial items

DEFF Research Database (Denmark)

Angel, Jais Andreas Breusch; De Chiffre, Leonardo

2014-01-01

In a comparison involving 27 laboratories from 8 countries, measurements on two common industrial items, a polymer part and a metal part, were carried out using X-ray Computed Tomography. All items were measured using coordinate measuring machines before and after circulation, with reference...

Using Item Response Theory to Develop a 60-Item Representation of the NEO PI-R Using the International Personality Item Pool: Development of the IPIP-NEO-60.

Science.gov (United States)

Maples-Keller, Jessica L; Williamson, Rachel L; Sleep, Chelsea E; Carter, Nathan T; Campbell, W Keith; Miller, Joshua D

2017-10-31

Given advantages of freely available and modifiable measures, an increase in the use of measures developed from the International Personality Item Pool (IPIP), including the 300-item representation of the Revised NEO Personality Inventory (NEO PI-R; Costa & McCrae, 1992a ) has occurred. The focus of this study was to use item response theory to develop a 60-item, IPIP-based measure of the Five-Factor Model (FFM) that provides equal representation of the FFM facets and to test the reliability and convergent and criterion validity of this measure compared to the NEO Five Factor Inventory (NEO-FFI). In an undergraduate sample (n = 359), scores from the NEO-FFI and IPIP-NEO-60 demonstrated good reliability and convergent validity with the NEO PI-R and IPIP-NEO-300. Additionally, across criterion variables in the undergraduate sample as well as a community-based sample (n = 757), the NEO-FFI and IPIP-NEO-60 demonstrated similar nomological networks across a wide range of external variables (r ICC = .96). Finally, as expected, in an MTurk sample the IPIP-NEO-60 demonstrated advantages over the Big Five Inventory-2 (Soto & John, 2017 ; n = 342) with regard to the Agreeableness domain content. The results suggest strong reliability and validity of the IPIP-NEO-60 scores.

16 CFR 304.6 - Marking requirements for imitation numismatic items.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Marking requirements for imitation... for imitation numismatic items. (a) An imitation numismatic item which is manufactured in the United... the item. (3) An imitation numismatic item of incusable material shall be incused with the word “COPY...

A comparison of Rasch item-fit and Cronbach's alpha item reduction analysis for the development of a Quality of Life scale for children and adolescents.

Science.gov (United States)

Erhart, M; Hagquist, C; Auquier, P; Rajmil, L; Power, M; Ravens-Sieberer, U

2010-07-01

This study compares item reduction analysis based on classical test theory (maximizing Cronbach's alpha - approach A), with analysis based on the Rasch Partial Credit Model item-fit (approach B), as applied to children and adolescents' health-related quality of life (HRQoL) items. The reliability and structural, cross-cultural and known-group validity of the measures were examined. Within the European KIDSCREEN project, 3019 children and adolescents (8-18 years) from seven European countries answered 19 HRQoL items of the Physical Well-being dimension of a preliminary KIDSCREEN instrument. The Cronbach's alpha and corrected item total correlation (approach A) were compared with infit mean squares and the Q-index item-fit derived according to a partial credit model (approach B). Cross-cultural differential item functioning (DIF ordinal logistic regression approach), structural validity (confirmatory factor analysis and residual correlation) and relative validity (RV) for socio-demographic and health-related factors were calculated for approaches (A) and (B). Approach (A) led to the retention of 13 items, compared with 11 items with approach (B). The item overlap was 69% for (A) and 78% for (B). The correlation coefficient of the summated ratings was 0.93. The Cronbach's alpha was similar for both versions [0.86 (A); 0.85 (B)]. Both approaches selected some items that are not strictly unidimensional and items displaying DIF. RV ratios favoured (A) with regard to socio-demographic aspects. Approach (B) was superior in RV with regard to health-related aspects. Both types of item reduction analysis should be accompanied by additional analyses. Neither of the two approaches was universally superior with regard to cultural, structural and known-group validity. However, the results support the usability of the Rasch method for developing new HRQoL measures for children and adolescents.

Large Item Disposal At The Drigg Low Level Waste Repository, United Kingdom

International Nuclear Information System (INIS)

Griffiths, Steve

2012-01-01

Currently the UK operates only one repository for low level radioactive waste, the LLWR near Drigg in Cumbria. It is located on the West Cumbrian coast near the village of Drigg. LLWR is designed for the management of solid LLW and has operated as the principal national disposal facility for LLW since 1959. LLWR is managed and operated on behalf of the Nuclear Decommissioning Authority (NDA) by UK Nuclear Waste Management Ltd. (UKNWM), parent body of LLW Repository Ltd. UKNWM is a consortium led by URS, Studsvik and AREVA. Waste is accepted at LLWR based on conditions for acceptance (1). Although there is some history of disposal of non-containerised 'large items' at the Drigg site these are anecdotally described as 'not quite fitting into an ISO container (2)' and enquiries indicate that their disposal was restricted to the legacy times when items were tumble-tipped into open trenches at the site, a practise now long ceased. The feasibility of true single large item disposal at the LLWR presents complex problems arising from the poor suitability of both rail and road infrastructure in UK. LLWR is serviced both by road and rail links. The static weight of large items being taken nominally as up to ∼300 metric tons would not necessarily preclude transportation by rail but the practicalities of this route are limited. The ageing rail infrastructure includes numerous tunnels, bridges and sections of line with overhead electrification. All these would require either careful justification or significant work to ensure the safe transit of large loads. Nuclear facilities in UK are by design in remote locations, not all of which are serviced by rail connections and the rail network itself has evolved to service inter-city transportation rather than heavy freight and as such tends to route through town centres, exacerbating the tunnel, bridge and pantograph concerns already identified. Within only a few miles of the LLWR itself there are requirements to pass both over and

Dissociation between source and item memory in Parkinson's disease

Institute of Scientific and Technical Information of China (English)

Hu Panpan; Li Youhai; Ma Huijuan; Xi Chunhua; Chen Xianwen; Wang Kai

2014-01-01

Background Episodic memory includes information about item memory and source memory.Many researches support the hypothesis that these two memory systems are implemented by different brain structures.The aim of this study was to investigate the characteristics of item memory and source memory processing in patients with Parkinson's disease (PD),and to further verify the hypothesis of dual-process model of source and item memory.Methods We established a neuropsychological battery to measure the performance of item memory and source memory.Totally 35 PD individuals and 35 matched healthy controls (HC) were administrated with the battery.Item memory task consists of the learning and recognition of high-frequency national Chinese characters; source memory task consists of the learning and recognition of three modes (character,picture,and image) of objects.Results Compared with the controls,the idiopathic PD patients have been impaired source memory (PD vs.HC:0.65±0.06 vs.0.72±0.09,P=0.001),but not impaired in item memory (PD vs.HC:0.65±0.07 vs.0.67±0.08,P=0.240).Conclusions The present experiment provides evidence for dissociation between item and source memory in PD patients,thereby strengthening the claim that the item or source memory rely on different brain structures.PD patients show poor source memory,in which dopamine plays a critical role.

Collaborative Filtering Based on Sequential Extraction of User-Item Clusters

Science.gov (United States)

Honda, Katsuhiro; Notsu, Akira; Ichihashi, Hidetomo

Collaborative filtering is a computational realization of “word-of-mouth” in network community, in which the items prefered by “neighbors” are recommended. This paper proposes a new item-selection model for extracting user-item clusters from rectangular relation matrices, in which mutual relations between users and items are denoted in an alternative process of “liking or not”. A technique for sequential co-cluster extraction from rectangular relational data is given by combining the structural balancing-based user-item clustering method with sequential fuzzy cluster extraction appraoch. Then, the tecunique is applied to the collaborative filtering problem, in which some items may be shared by several user clusters.

An empirical comparison of Item Response Theory and Classical Test Theory

Directory of Open Access Journals (Sweden)

Špela Progar

2008-11-01

Full Text Available Based on nonlinear models between the measured latent variable and the item response, item response theory (IRT enables independent estimation of item and person parameters and local estimation of measurement error. These properties of IRT are also the main theoretical advantages of IRT over classical test theory (CTT. Empirical evidence, however, often failed to discover consistent differences between IRT and CTT parameters and between invariance measures of CTT and IRT parameter estimates. In this empirical study a real data set from the Third International Mathematics and Science Study (TIMSS 1995 was used to address the following questions: (1 How comparable are CTT and IRT based item and person parameters? (2 How invariant are CTT and IRT based item parameters across different participant groups? (3 How invariant are CTT and IRT based item and person parameters across different item sets? The findings indicate that the CTT and the IRT item/person parameters are very comparable, that the CTT and the IRT item parameters show similar invariance property when estimated across different groups of participants, that the IRT person parameters are more invariant across different item sets, and that the CTT item parameters are at least as much invariant in different item sets as the IRT item parameters. The results furthermore demonstrate that, with regards to the invariance property, IRT item/person parameters are in general empirically superior to CTT parameters, but only if the appropriate IRT model is used for modelling the data.

Item difficulty of multiple choice tests dependant on different item response formats – An experiment in fundamental research on psychological assessment

Directory of Open Access Journals (Sweden)

KLAUS D. KUBINGER

2007-12-01

Full Text Available Multiple choice response formats are problematical as an item is often scored as solved simply because the test-taker is a lucky guesser. Instead of applying pertinent IRT models which take guessing effects into account, a pragmatic approach of re-conceptualizing multiple choice response formats to reduce the chance of lucky guessing is considered. This paper compares the free response format with two different multiple choice formats. A common multiple choice format with a single correct response option and five distractors (“1 of 6” is used, as well as a multiple choice format with five response options, of which any number of the five is correct and the item is only scored as mastered if all the correct response options and none of the wrong ones are marked (“x of 5”. An experiment was designed, using pairs of items with exactly the same content but different response formats. 173 test-takers were randomly assigned to two test booklets of 150 items altogether. Rasch model analyses adduced a fitting item pool, after the deletion of 39 items. The resulting item difficulty parameters were used for the comparison of the different formats. The multiple choice format “1 of 6” differs significantly from “x of 5”, with a relative effect of 1.63, while the multiple choice format “x of 5” does not significantly differ from the free response format. Therefore, the lower degree of difficulty of items with the “1 of 6” multiple choice format is an indicator of relevant guessing effects. In contrast the “x of 5” multiple choice format can be seen as an appropriate substitute for free response format.

Attention restores discrete items to visual short-term memory.

Science.gov (United States)

Murray, Alexandra M; Nobre, Anna C; Clark, Ian A; Cravo, André M; Stokes, Mark G

2013-04-01

When a memory is forgotten, is it lost forever? Our study shows that selective attention can restore forgotten items to visual short-term memory (VSTM). In our two experiments, all stimuli presented in a memory array were designed to be equally task relevant during encoding. During the retention interval, however, participants were sometimes given a cue predicting which of the memory items would be probed at the end of the delay. This shift in task relevance improved recall for that item. We found that this type of cuing improved recall for items that otherwise would have been irretrievable, providing critical evidence that attention can restore forgotten information to VSTM. Psychophysical modeling of memory performance has confirmed that restoration of information in VSTM increases the probability that the cued item is available for recall but does not improve the representational quality of the memory. We further suggest that attention can restore discrete items to VSTM.

Australian Chemistry Test Item Bank: Years 11 & 12. Volume 1.

Science.gov (United States)

Commons, C., Ed.; Martin, P., Ed.

Volume 1 of the Australian Chemistry Test Item Bank, consisting of two volumes, contains nearly 2000 multiple-choice items related to the chemistry taught in Year 11 and Year 12 courses in Australia. Items which were written during 1979 and 1980 were initially published in the "ACER Chemistry Test Item Collection" and in the "ACER…

Republic of Croatia's Experiences in the Implementation of the EU Directive About Dual-Use Items

International Nuclear Information System (INIS)

Vidas, Z.; Orehovec, Z.; Superina, V.

2007-01-01

The Republic of Croatia is undergoing a process of adjusting its own legislation to the legislation of EU. It is one of the most important obligations of the EU-Croatia Stabilization and Association Agreement. It is also a basic prerequisite for the practical realization of the modern, unique and integral Export and Import Control system of the Sensitive Items. At the same time, it is a very important step towards better understanding of real and great danger of the weapons of mass destruction (WMD) proliferation and their possible usage in terrorism. That means that Republic of Croatia will act along with EU in the complex activities to prevent and minimize the WMD proliferation, to participate in antiterrorism activities, and to maintain regional and global security. In the year 2004, along the lines of the EU Legislation, the Croatian Parliament adopted the basic legal act - Act on export of Dual-use Items and its accompanying rules and regulations. The existing act on dual-purpose items in Croatia is mostly in harmony with the 2000 and 2003 EU Decrees which regulate te regime of the dual-purpose items export control. Nevertheless, the EU legislation experiences constant amendments in the field. And the Croatian Government is committed to following the improvements of te system and adjusting its own. However, during this process, a series of vague wordings and inconsistencies were noticed in the WMD nonproliferation policy and in the legislation to control the export of high technology products which could be abused for the WMD development. In addition, there is neither regulation on import control system nor control on the export of knowledge through scientific and professional cooperation. The purpose of this article is to professionally elaborate the value wordings and inconsistencies. It can be done on the basis of Croatia's experiences in the export and import control system of the dual-purpose items and knowledge and experience acquired through the

Safeguards and security benefits of project straight-line

International Nuclear Information System (INIS)

Jaeger, C.D.; Waddoups, I.G.

1995-01-01

As a result of a number of events the inventory of fissile materials no longer in nuclear weapons in the United States is increasing. This has led to a growing concern regarding the potential for theft and/or diversion and accountability of this material. Straight-Line is a project whose purpose is to demonstrate a site-independent system to monitor stored nuclear material (e.g. plutonium) and integrate the collection, processing and dissemination of information regarding this material. Safeguards and security (S ampersand S) goals of this project include data transfer of information on nuclear material to appropriate users to enhance S ampersand S, continuous on-line accountability, reduction of hands-on access to nuclear materials, incorporation of information security technologies, and early detection of tampering or unauthorized material movement. This paper addresses threat considerations, S ampersand S requirements, S ampersand S objectives, and issues for the Straight-Line project. S ampersand S features and benefits of this project are discussed with respect to existing item monitoring systems and/or other material tracking systems being developed

Evaluating the quality of medical multiple-choice items created with automated processes.

Science.gov (United States)

Gierl, Mark J; Lai, Hollis

2013-07-01

Computerised assessment raises formidable challenges because it requires large numbers of test items. Automatic item generation (AIG) can help address this test development problem because it yields large numbers of new items both quickly and efficiently. To date, however, the quality of the items produced using a generative approach has not been evaluated. The purpose of this study was to determine whether automatic processes yield items that meet standards of quality that are appropriate for medical testing. Quality was evaluated firstly by subjecting items created using both AIG and traditional processes to rating by a four-member expert medical panel using indicators of multiple-choice item quality, and secondly by asking the panellists to identify which items were developed using AIG in a blind review. Fifteen items from the domain of therapeutics were created in three different experimental test development conditions. The first 15 items were created by content specialists using traditional test development methods (Group 1 Traditional). The second 15 items were created by the same content specialists using AIG methods (Group 1 AIG). The third 15 items were created by a new group of content specialists using traditional methods (Group 2 Traditional). These 45 items were then evaluated for quality by a four-member panel of medical experts and were subsequently categorised as either Traditional or AIG items. Three outcomes were reported: (i) the items produced using traditional and AIG processes were comparable on seven of eight indicators of multiple-choice item quality; (ii) AIG items can be differentiated from Traditional items by the quality of their distractors, and (iii) the overall predictive accuracy of the four expert medical panellists was 42%. Items generated by AIG methods are, for the most part, equivalent to traditionally developed items from the perspective of expert medical reviewers. While the AIG method produced comparatively fewer plausible

Air traffic security act unconstitutional

International Nuclear Information System (INIS)

Heller, W.

2006-01-01

In the interest of more effective protective measures against terrorist attacks, the German federal parliament inter alia added a clause to the Air Traffic Security Act (Sec. 14, Para. 3, Air Traffic Security Act) empowering the armed forces to shoot down aircraft to be used as a weapon against human lives. In Germany, this defense possibility has been discussed also in connection with deliberate crashes of hijacked aircraft on nuclear power plants. The 1 st Division of the German Federal Constitutional Court, in its decision of February 15, 2006, ruled that Sec. 14, Para. 3, Air Traffic Security Act was incompatible with the Basic Law and thus was null and void (file No. 1 BvR 357/05) for two reasons: - There was no legislative authority on the part of the federal government. - The provision was incompatible with the basic right of life and the guarantee of human dignity as enshrined in the Basic Law. (orig.)

An Investigation of Item Type in a Standards-Based Assessment.

Directory of Open Access Journals (Sweden)

Liz Hollingworth

2007-12-01

Full Text Available Large-scale state assessment programs use both multiple-choice and open-ended items on tests for accountability purposes. Certainly, there is an intuitive belief among some educators and policy makers that open-ended items measure something different than multiple-choice items. This study examined two item formats in custom-built, standards-based tests of achievement in Reading and Mathematics at grades 3-8. In this paper, we raise questions about the value of including open-ended items, given scoring costs, time constraints, and the higher probability of missing data from test-takers.

Instemmingsgeneigdheid en verskillende item- en responsformate in 'n gesommeerde selfbeoordelingskaal

Directory of Open Access Journals (Sweden)

Nadene Hanekom

1998-06-01

Full Text Available This study examines the degree of acquiescence present when the item and response formats of a summated rating scale are varied. It is often recommended that acquiescence response bias in rating scales may be controlled by using both positively and negatively worded items. Such items are generally worded in the Likert-type format of statements. The purpose of the study was to establish whether items in question format would result in a smaller degree of acquiescence than items worded as statements. the response format was also varied (five- and seven-point options to determine whether this would influence the reliability and degree of acquiescence in the scales. A twenty-item Locus of Control (LC questionnaire was used, but each item was complemented by its opposite, resulting in 40 items. The subjects, divided randomly into two groups, were second year students who had to complete four versions of the questionnaire, plus a shortened version of Bass's scale for measuring acquiescence. The LC version were questions or statements each combined with a five- or seven-point respons format. Partial counterbalancing was introduced by testing on two separate occasions, presenting the tests to the two groups in the opposite order. The degree of acquiescence was assessed by correlating the items with their opposite, and by correlating scores on each version with scores on the acquiescence questionnaire. No major difference were found between the various item and response format in relation to acquiescence. Opsomming Hierdie ondersoek is uitgevoer om te bepaal of die mate van instemmingsgeneigdheid deur die item- en responsformaat van 'n gesommeerde selfbeoordelingskaal beinvloed word. Daar word dikwels aanbeveel dat die gebruik van positief- sowel as negatiefbewoorde items in 'n vraelys instemmingsgeneigdheid beperk. Suike items word gewoonlik in die tradisionele Likertformaat as stellings geformuleer. Die doel van die ondersoek was om te bepaal of items

Writing, Evaluating and Assessing Data Response Items in Economics.

Science.gov (United States)

Trotman-Dickenson, D. I.

1989-01-01

Describes some of the problems in writing data response items in economics for use by A Level and General Certificate of Secondary Education (GCSE) students. Examines the experience of two series of workshops on writing items, evaluating them and assessing responses from schools. Offers suggestions for producing packages of data response items as…

Three Modeling Applications to Promote Automatic Item Generation for Examinations in Dentistry.

Science.gov (United States)

Lai, Hollis; Gierl, Mark J; Byrne, B Ellen; Spielman, Andrew I; Waldschmidt, David M

2016-03-01

Test items created for dentistry examinations are often individually written by content experts. This approach to item development is expensive because it requires the time and effort of many content experts but yields relatively few items. The aim of this study was to describe and illustrate how items can be generated using a systematic approach. Automatic item generation (AIG) is an alternative method that allows a small number of content experts to produce large numbers of items by integrating their domain expertise with computer technology. This article describes and illustrates how three modeling approaches to item content-item cloning, cognitive modeling, and image-anchored modeling-can be used to generate large numbers of multiple-choice test items for examinations in dentistry. Test items can be generated by combining the expertise of two content specialists with technology supported by AIG. A total of 5,467 new items were created during this study. From substitution of item content, to modeling appropriate responses based upon a cognitive model of correct responses, to generating items linked to specific graphical findings, AIG has the potential for meeting increasing demands for test items. Further, the methods described in this study can be generalized and applied to many other item types. Future research applications for AIG in dental education are discussed.

On-line data processing for scintillation camera

International Nuclear Information System (INIS)

Ueyanagi, Hideo

1974-01-01

To process on-line the information from scintillation cameras, the computing/processing device of wired program type, with a specialized mini-computer for the processing, is generally used; and by this method, the data processing is done by the users of scintillation cameras. In the device with a mini-computer with processing programming by software, the almost all items in processing can be executed; but the operation requires some skill. With mini-computer operation, on the other hand, there are the problems of data-point number, process-time reduction, and image storage for both long and short terms. (Mori, K.)

Separating relational from item load effects in paired recognition: temporoparietal and middle frontal gyral activity with increased associates, but not items during encoding and retention.

Science.gov (United States)

Phillips, Steven; Niki, Kazuhisa

2002-10-01

Working memory is affected by items stored and the relations between them. However, separating these factors has been difficult, because increased items usually accompany increased associations/relations. Hence, some have argued, relational effects are reducible to item effects. We overcome this problem by manipulating index length: the fewest number of item positions at which there is a unique item, or tuple of items (if length >1), for every instance in the relational (memory) set. Longer indexes imply greater similarity (number of shared items) between instances and higher load on encoding processes. Subjects were given lists of study pairs and asked to make a recognition judgement. The number of unique items and index length in the three list conditions were: (1) AB, CD: four/one; (2) AB, CD, EF: six/one; and (3) AB, AD, CB: four/two, respectively. Japanese letters were used in Experiments 1 (kanji-ideograms) and 2 (hiragana-phonograms); numbers in Experiment 3; and shapes generated from Fourier descriptors in Experiment 4. Across all materials, right dominant temporoparietal and middle frontal gyral activity was found with increased index length, but not items during study. In Experiment 5, a longer delay was used to isolate retention effects in the absence of visual stimuli. Increased left hemispheric activity was observed in the precuneus, middle frontal gyrus, and superior temporal gyrus with increased index length for the delay period. These results show that relational load is not reducible to item load.

LS1 Report: The cryogenic line goes through the scanner

CERN Multimedia

CERN Bulletin

2013-01-01

In spite of the complexity of LS1, with many different activities taking place in parallel and sometimes overlapping, the dashboard shows that work is progressing on schedule. This week, teams have started X-raying the cryogenic line to examine its condition in minute detail.   The LS1 schedule is pretty unfathomable for those who don't work in the tunnels or installations, but if you look down all the columns and stop at the line indicating today’s date, you can see that all of the priority and critical items are bang on time, like a Swiss watch. More specifically: the SMACC project in the LHC is on schedule, with a new testing phase for the interconnections which have already been consolidated; preparations are under way for the cable replacement campaign at Point 1 of the SPS (about 20% of the cables will not be replaced as they are completely unused); and the demineralised water distribution line is back in service, as are the electrical substations for the 400 and 66 kV line...

Rats Remember Items in Context Using Episodic Memory.

Science.gov (United States)

Panoz-Brown, Danielle; Corbin, Hannah E; Dalecki, Stefan J; Gentry, Meredith; Brotheridge, Sydney; Sluka, Christina M; Wu, Jie-En; Crystal, Jonathon D

2016-10-24

Vivid episodic memories in people have been characterized as the replay of unique events in sequential order [1-3]. Animal models of episodic memory have successfully documented episodic memory of a single event (e.g., [4-8]). However, a fundamental feature of episodic memory in people is that it involves multiple events, and notably, episodic memory impairments in human diseases are not limited to a single event. Critically, it is not known whether animals remember many unique events using episodic memory. Here, we show that rats remember many unique events and the contexts in which the events occurred using episodic memory. We used an olfactory memory assessment in which new (but not old) odors were rewarded using 32 items. Rats were presented with 16 odors in one context and the same odors in a second context. To attain high accuracy, the rats needed to remember item in context because each odor was rewarded as a new item in each context. The demands on item-in-context memory were varied by assessing memory with 2, 3, 5, or 15 unpredictable transitions between contexts, and item-in-context memory survived a 45 min retention interval challenge. When the memory of item in context was put in conflict with non-episodic familiarity cues, rats relied on item in context using episodic memory. Our findings suggest that rats remember multiple unique events and the contexts in which these events occurred using episodic memory and support the view that rats may be used to model fundamental aspects of human cognition. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of non-recurring items on analysts’ earnings forecasts

Directory of Open Access Journals (Sweden)

Nan Li

2018-03-01

Full Text Available This article discusses the effects of non-recurring profits and losses on statement users’ decision-making processes from the perspective of securities analysts. We examine the relationship between analysts’ forecast revisions and firms’ non-recurring earnings. We find that 1 non-recurring gains and losses can influence analysts’ earnings forecast revision; 2 compared with non-recurring items resulting from policy changes, analysts are more concerned about those attributed to changes in business scope; 3 if listed companies use non-recurring items to turn losses into gains during earnings management, it will weaken the effects of non-recurring items on analysts’ earnings forecast revision. The results suggest that non-recurring items that result from changes in business scope incorporate information that users need for the future operation of the business. This article verifies the information relevance of non-recurring items and provides evidence for the necessity of non-recurring item disclosure. Keywords: Non-recurring items, Earnings forecasts, Revisions

Mediate gamma radiation effects on some packaged food items

International Nuclear Information System (INIS)

Inamura, Patricia Y.; Uehara, Vanessa B.; Teixeira, Christian A.H.M.; Mastro, Nelida L. del

2012-01-01

For most of prepackaged foods a 10 kGy radiation dose is considered the maximum dose needed; however, the commercially available and practically accepted packaging materials must be suitable for such application. This work describes the application of ionizing radiation on several packaged food items, using 5 dehydrated food items, 5 ready-to-eat meals and 5 ready-to-eat food items irradiated in a 60 Co gamma source with a 3 kGy dose. The quality evaluation of the irradiated samples was performed 2 and 8 months after irradiation. Microbiological analysis (bacteria, fungus and yeast load) was performed. The sensory characteristics were established for appearance, aroma, texture and flavor attributes were also established. From these data, the acceptability of all irradiated items was obtained. All ready-to-eat food items assayed like manioc flour, some pâtés and blocks of raw brown sugar and most of ready-to-eat meals like sausages and chicken with legumes were considered acceptable for microbial and sensory characteristics. On the other hand, the dehydrated food items chosen for this study, such as dehydrated bacon potatoes or pea soups were not accepted by the sensory analysis. A careful dose choice and special irradiation conditions must be used in order to achieve sensory acceptability needed for the commercialization of specific irradiated food items. - Highlights: ► We applied gamma radiation on several kinds of packaged food items. ► Microbiological and sensory analyses were performed 2 and 8 months after irradiation. ► All ready-to-eat food items assayed were approved for microbial and sensory characteristics. ► Most ready-to-eat meals like sausages and chicken with legumes were also acceptable. ► Dehydrated bacon potatoes or pea soups were considered not acceptable.

41 CFR 101-27.209-1 - GSA stock items.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true GSA stock items. 101-27.209-1 Section 101-27.209-1 Public Contracts and Property Management Federal Property Management...-Management of Shelf-Life Materials § 101-27.209-1 GSA stock items. Shelf-life items that meet the criteria...

12 CFR 210.8 - Presenting noncash items for acceptance.

Science.gov (United States)

2010-01-01

... for acceptance. (a) A Reserve Bank or a subsequent collecting bank may, if instructed by the sender, present a noncash item for acceptance in any manner authorized by law if— (1) The item provides that it... 12 Banks and Banking 2 2010-01-01 2010-01-01 false Presenting noncash items for acceptance. 210.8...

Brief Sensation Seeking Scale: Latent structure of 8-item and 4-item versions in Peruvian adolescents.

Science.gov (United States)

Merino-Soto, Cesar; Salas Blas, Edwin

2018-01-01

This research intended to validate two brief scales of sensations seeking with Peruvian adolescents: the eight item scale (BSSS8; Hoyle, Stephenson, Palmgreen, Lorch, y Donohew, 2002) and the four item scale (BSSS4; Stephenson, Hoyle, Slater, y Palmgreen, 2003). Questionnaires were administered to 618 voluntary participants, with an average age of 13.6 years, from different levels of high school, state and private school in a district in the south of Lima. It analyzed the internal structure of both short versions using three models: a) unidimensional (M1), b) oblique or related dimensions (M2), and c) the bifactor model (M3). Results show that both instruments have a single dimension which best represents the variability of the items; a fact that can be explained both by the complexity of the concept and by the small number of items representing each factor, which is more noticeable in the BSSS4. Reliability is within levels found by previous studies: alpha: .745 = BSSS8 and BSSS4 =. 643; omega coefficient: .747 in BSSS8 and .651 in BSSS4. These are considered suitable for the type of instruments studied. Based on the correlation between the two instruments, it was found that there are satisfactory levels of equivalence between the BSSS8 and BSSS4. However, it is recommended that the BSSS4 is mainly used for research and for the purpose of describing populations.

Item response theory analysis of the mechanics baseline test

Science.gov (United States)

Cardamone, Caroline N.; Abbott, Jonathan E.; Rayyan, Saif; Seaton, Daniel T.; Pawl, Andrew; Pritchard, David E.

2012-02-01

Item response theory is useful in both the development and evaluation of assessments and in computing standardized measures of student performance. In item response theory, individual parameters (difficulty, discrimination) for each item or question are fit by item response models. These parameters provide a means for evaluating a test and offer a better measure of student skill than a raw test score, because each skill calculation considers not only the number of questions answered correctly, but the individual properties of all questions answered. Here, we present the results from an analysis of the Mechanics Baseline Test given at MIT during 2005-2010. Using the item parameters, we identify questions on the Mechanics Baseline Test that are not effective in discriminating between MIT students of different abilities. We show that a limited subset of the highest quality questions on the Mechanics Baseline Test returns accurate measures of student skill. We compare student skills as determined by item response theory to the more traditional measurement of the raw score and show that a comparable measure of learning gain can be computed.

Item Response Theory Analysis of the Psychopathic Personality Inventory-Revised.

Science.gov (United States)

Eichenbaum, Alexander E; Marcus, David K; French, Brian F

2017-06-01

This study examined item and scale functioning in the Psychopathic Personality Inventory-Revised (PPI-R) using an item response theory analysis. PPI-R protocols from 1,052 college student participants (348 male, 704 female) were analyzed. Analyses were conducted on the 131 self-report items comprising the PPI-R's eight content scales, using a graded response model. Scales collected a majority of their information about respondents possessing higher than average levels of the traits being measured. Each scale contained at least some items that evidenced limited ability to differentiate between respondents with differing levels of the trait being measured. Moreover, 80 items (61.1%) yielded significantly different responses between men and women presumably possessing similar levels of the trait being measured. Item performance was also influenced by the scoring format (directly scored vs. reverse-scored) of the items. Overall, the results suggest that the PPI-R, despite identifying psychopathic personality traits in individuals possessing high levels of those traits, may not identify these traits equally well for men and women, and scores are likely influenced by the scoring format of the individual item and scale.

Desenvolvimento de uma escala para medir o potencial empreendedor utilizando a Teoria da Resposta ao Item (TRI Development of a scale to measure the entrepreneurial potential using the Item Response Theory (IRT

Directory of Open Access Journals (Sweden)

Luciano Ricardo Rath Alves

2011-01-01

Full Text Available Diversas variáveis estão relacionadas ao desenvolvimento da atividade empreendedora, verifica-se, entre elas, a importância do agente empreendedor. Dos estudos que contribuem para o seu entendimento, este segue a linha que defende que o empreendedor tem características e traços de personalidade singulares em relação à população, os quais são propícios ao sucesso do empreendedorismo. O objetivo deste trabalho é desenvolver uma escala para medir o potencial empreendedor utilizando a Teoria da Resposta ao Item. Foi utilizado o modelo logístico de dois parâmetros da TRI. As estimativas dos parâmetros foram obtidas a partir da amostra com 764 pessoas que responderam a um instrumento composto por 103 itens. A curva de informação e do erro padrão do teste e a interpretação qualitativa de níveis da escala permitiram determinar o intervalo mais apropriado para utilização do instrumento. Os resultados mostraram que a escala é mais adequada para avaliar indivíduos com baixo até moderadamente alto potencial empreendedor. Por isso, sugere-se que novos itens sejam incorporados ao instrumento para mensurar e interpretar níveis ainda mais elevados. A Teoria da Resposta ao Item permite que novos itens sejam calibrados a fim de mensurar os empreendedores com alto potencial empreendedor, aproveitando os dados já obtidos.Several variables are related to the development of entrepreneurial activities. An important one among them is the entrepreneurial agent. This study is one of many that contribute to the understanding of the entrepreneurial agent. In its line of thought, it upholds the idea that the entrepreneur has characteristics and personality traits that stand out from the general population and that are favorable to the success of the entrepreneurship. This study aims at developing a measurement scale for entrepreneurial potential using the Item Response Theory. The items were generated by Santos (2008 based on a theoretical model

26 CFR 301.6231(a)(3)-1 - Partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Partnership items. 301.6231(a)(3)-1 Section 301... Partnership items. (a) In general. For purposes of subtitle F of the Internal Revenue Code of 1954, the following items which are required to be taken into account for the taxable year of a partnership under...

Item Response Theory Models for Performance Decline during Testing

Science.gov (United States)

Jin, Kuan-Yu; Wang, Wen-Chung

2014-01-01

Sometimes, test-takers may not be able to attempt all items to the best of their ability (with full effort) due to personal factors (e.g., low motivation) or testing conditions (e.g., time limit), resulting in poor performances on certain items, especially those located toward the end of a test. Standard item response theory (IRT) models fail to…

Identifying predictors of physics item difficulty: A linear regression approach

Science.gov (United States)

Mesic, Vanes; Muratovic, Hasnija

2011-06-01

Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal physics knowledge

Identifying predictors of physics item difficulty: A linear regression approach

Directory of Open Access Journals (Sweden)

Hasnija Muratovic

2011-06-01

Full Text Available Large-scale assessments of student achievement in physics are often approached with an intention to discriminate students based on the attained level of their physics competencies. Therefore, for purposes of test design, it is important that items display an acceptable discriminatory behavior. To that end, it is recommended to avoid extraordinary difficult and very easy items. Knowing the factors that influence physics item difficulty makes it possible to model the item difficulty even before the first pilot study is conducted. Thus, by identifying predictors of physics item difficulty, we can improve the test-design process. Furthermore, we get additional qualitative feedback regarding the basic aspects of student cognitive achievement in physics that are directly responsible for the obtained, quantitative test results. In this study, we conducted a secondary analysis of data that came from two large-scale assessments of student physics achievement at the end of compulsory education in Bosnia and Herzegovina. Foremost, we explored the concept of “physics competence” and performed a content analysis of 123 physics items that were included within the above-mentioned assessments. Thereafter, an item database was created. Items were described by variables which reflect some basic cognitive aspects of physics competence. For each of the assessments, Rasch item difficulties were calculated in separate analyses. In order to make the item difficulties from different assessments comparable, a virtual test equating procedure had to be implemented. Finally, a regression model of physics item difficulty was created. It has been shown that 61.2% of item difficulty variance can be explained by factors which reflect the automaticity, complexity, and modality of the knowledge structure that is relevant for generating the most probable correct solution, as well as by the divergence of required thinking and interference effects between intuitive and formal

Item response theory analysis of the Pain Self-Efficacy Questionnaire.

Science.gov (United States)

Costa, Daniel S J; Asghari, Ali; Nicholas, Michael K

2017-01-01

The Pain Self-Efficacy Questionnaire (PSEQ) is a 10-item instrument designed to assess the extent to which a person in pain believes s/he is able to accomplish various activities despite their pain. There is strong evidence for the validity and reliability of both the full-length PSEQ and a 2-item version. The purpose of this study is to further examine the properties of the PSEQ using an item response theory (IRT) approach. We used the two-parameter graded response model to examine the category probability curves, and location and discrimination parameters of the 10 PSEQ items. In item response theory, responses to a set of items are assumed to be probabilistically determined by a latent (unobserved) variable. In the graded-response model specifically, item response threshold (the value of the latent variable for which adjacent response categories are equally likely) and discrimination parameters are estimated for each item. Participants were 1511 mixed, chronic pain patients attending for initial assessment at a tertiary pain management centre. All items except item 7 ('I can cope with my pain without medication') performed well in IRT analysis, and the category probability curves suggested that participants used the 7-point response scale consistently. Items 6 ('I can still do many of the things I enjoy doing, such as hobbies or leisure activity, despite pain'), 8 ('I can still accomplish most of my goals in life, despite the pain') and 9 ('I can live a normal lifestyle, despite the pain') captured higher levels of the latent variable with greater precision. The results from this IRT analysis add to the body of evidence based on classical test theory illustrating the strong psychometric properties of the PSEQ. Despite the relatively poor performance of Item 7, its clinical utility warrants its retention in the questionnaire. The strong psychometric properties of the PSEQ support its use as an effective tool for assessing self-efficacy in people with pain

Development of six PROMIS pediatrics proxy-report item banks.

Science.gov (United States)

Irwin, Debra E; Gross, Heather E; Stucky, Brian D; Thissen, David; DeWitt, Esi Morgan; Lai, Jin Shei; Amtmann, Dagmar; Khastou, Leyla; Varni, James W; DeWalt, Darren A

2012-02-22

Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO) among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS) pediatric proxy-report item banks. The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact). Caregivers (n = 25) of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads). Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432). In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%), married (70%), Caucasian (64%) and had at least a high school education (94%). Approximately 50% had children with a chronic health condition, primarily asthma, which was diagnosed or treated within 6

Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

Energy Technology Data Exchange (ETDEWEB)

Tessmar, Nancy D. [Los Alamos National Laboratory; Salazar, Michael J. [Los Alamos National Laboratory

2012-09-18

Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

Combining item and bulk material loss-detection uncertainties

International Nuclear Information System (INIS)

Eggers, R.F.

1982-01-01

Loss detection requirements, such as five formula kilograms with 99% probability of detection, which apply to the sum of losses from material in both item and bulk form, constitute a special problem for the nuclear material statistician. Requirements of this type are included in the Material Control and Accounting Reform Amendments described in the Advance Notice of Proposed Rule Making (Federal Register, 46(175):45144-46151). Attribute test sampling of items is the method used to detect gross defects in the inventory of items in a given control unit. Attribute sampling plans are designed to detect a loss of a specificed goal quantity of material with a given probability. In contrast to the methods and statistical models used for item loss detection, bulk material loss detection requires all the material entering and leaving a control unit to be measured and the calculation of a loss estimator that will be tested against an appropriate alarm threshold. The alarm threshold is determined from an estimate of the error inherent in the components of the loss estimator. In this paper a simple grahical method of evaluating the combined capabilities of bulk material loss detection methods and item attribute testing procedures will be described. Quantitative results will be given for several cases, indicating how a decrease in the precision of the item loss detection method tends to force an increase in the precision of the bulk loss detection procedure in order to meet the overall detection requirement. 4 figures

Individuals with knee impairments identify items in need of clarification in the Patient Reported Outcomes Measurement Information System (PROMIS®) pain interference and physical function item banks - a qualitative study.

Science.gov (United States)

Lynch, Andrew D; Dodds, Nathan E; Yu, Lan; Pilkonis, Paul A; Irrgang, James J

2016-05-11

The content and wording of the Patient Reported Outcome Measurement Information System (PROMIS) Physical Function and Pain Interference item banks have not been qualitatively assessed by individuals with knee joint impairments. The purpose of this investigation was to identify items in the PROMIS Physical Function and Pain Interference Item Banks that are irrelevant, unclear, or otherwise difficult to respond to for individuals with impairment of the knee and to suggest modifications based on cognitive interviews. Twenty-nine individuals with knee joint impairments qualitatively assessed items in the Pain Interference and Physical Function Item Banks in a mixed-methods cognitive interview. Field notes were analyzed to identify themes and frequency counts were calculated to identify items not relevant to individuals with knee joint impairments. Issues with clarity were identified in 23 items in the Physical Function Item Bank, resulting in the creation of 43 new or modified items, typically changing words within the item to be clearer. Interpretation issues included whether or not the knee joint played a significant role in overall health and age/gender differences in items. One quarter of the original items (31 of 124) in the Physical Function Item Bank were identified as irrelevant to the knee joint. All 41 items in the Pain Interference Item Bank were identified as clear, although individuals without significant pain substituted other symptoms which interfered with their life. The Physical Function Item Bank would benefit from additional items that are relevant to individuals with knee joint impairments and, by extension, to other lower extremity impairments. Several issues in clarity were identified that are likely to be present in other patient cohorts as well.

Detection of person misfit in computerized adaptive tests with polytomous items

NARCIS (Netherlands)

van Krimpen-Stoop, Edith; Meijer, R.R.

2000-01-01

Item scores that do not fit an assumed item response theory model may cause the latent trait value to be estimated inaccurately. For computerized adaptive tests (CAT) with dichotomous items, several person-fit statistics for detecting nonfitting item score patterns have been proposed. Both for

Binary classification of items of interest in a repeatable process

Science.gov (United States)

Abell, Jeffrey A.; Spicer, John Patrick; Wincek, Michael Anthony; Wang, Hui; Chakraborty, Debejyo

2014-06-24

A system includes host and learning machines in electrical communication with sensors positioned with respect to an item of interest, e.g., a weld, and memory. The host executes instructions from memory to predict a binary quality status of the item. The learning machine receives signals from the sensor(s), identifies candidate features, and extracts features from the candidates that are more predictive of the binary quality status relative to other candidate features. The learning machine maps the extracted features to a dimensional space that includes most of the items from a passing binary class and excludes all or most of the items from a failing binary class. The host also compares the received signals for a subsequent item of interest to the dimensional space to thereby predict, in real time, the binary quality status of the subsequent item of interest.

The Dif Identification in Constructed Response Items Using Partial Credit Model

Directory of Open Access Journals (Sweden)

Heri Retnawati

2017-10-01

Full Text Available The study was to identify the load, the type and the significance of differential item functioning (DIF in constructed response item using the partial credit model (PCM. The data in the study were the students’ instruments and the students’ responses toward the PISA-like test items that had been completed by 386 ninth grade students and 460 tenth grade students who had been about 15 years old in the Province of Yogyakarta Special Region in Indonesia. The analysis toward the item characteristics through the student categorization based on their class was conducted toward the PCM using CONQUEST software. Furthermore, by applying these items characteristics, the researcher draw the category response function (CRF graphic in order to identify whether the type of DIF content had been in uniform or non-uniform. The significance of DIF was identified by comparing the discrepancy between the difficulty level parameter and the error in the CONQUEST output results. The results of the analysis showed that from 18 items that had been analyzed there were 4 items which had not been identified load DIF, there were 5 items that had been identified containing DIF but not statistically significant and there were 9 items that had been identified containing DIF significantly. The causes of items containing DIF were discussed.

Grouping of Items in Mobile Web Questionnaires

Science.gov (United States)

Mavletova, Aigul; Couper, Mick P.

2016-01-01

There is some evidence that a scrolling design may reduce breakoffs in mobile web surveys compared to a paging design, but there is little empirical evidence to guide the choice of the optimal number of items per page. We investigate the effect of the number of items presented on a page on data quality in two types of questionnaires: with or…

Polytomous latent scales for the investigation of the ordering of items

NARCIS (Netherlands)

Ligtvoet, R.; van der Ark, L.A.; Bergsma, W. P.; Sijtsma, K.

2011-01-01

We propose three latent scales within the framework of nonparametric item response theory for polytomously scored items. Latent scales are models that imply an invariant item ordering, meaning that the order of the items is the same for each measurement value on the latent scale. This ordering

Computerized adaptive testing item selection in computerized adaptive learning systems

NARCIS (Netherlands)

Eggen, Theodorus Johannes Hendrikus Maria; Eggen, T.J.H.M.; Veldkamp, B.P.

2012-01-01

Item selection methods traditionally developed for computerized adaptive testing (CAT) are explored for their usefulness in item-based computerized adaptive learning (CAL) systems. While in CAT Fisher information-based selection is optimal, for recovering learning populations in CAL systems item

Optimal item discrimination and maximum information for logistic IRT models

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn P.F.; Berger, Martijn

1999-01-01

Items with the highest discrimination parameter values in a logistic item response theory model do not necessarily give maximum information. This paper derives discrimination parameter values, as functions of the guessing parameter and distances between person parameters and item difficulty, that

Impact of patient suicide on front-line staff in Ireland.

LENUS (Irish Health Repository)

Gaffney, Paul

2009-08-01

Research and anecdotal evidence suggests that coming to terms with the suicide of a patient can be extremely distressing for front-line professionals. Some research also suggests that exposure to such situations can undermine professionals\\' functioning and feelings of competence, cause them to question their professional standing and ultimately contribute to burnout. A survey of 447 front-line professionals\\' experiences of patient suicide was undertaken to further explore these issues. Thematic analysis of open-ended questionnaire items revealed that concerns for the bereaved family, feelings of responsibility for the death and having a close therapeutic relationship with the client are key factors that influence the adjustment and coping of a health professional in the aftermath of the death of a client by suicide. The results are discussed with a focus on the impact of suicide on front-line staff, the need for ongoing support and training and the development of specific post-suicide protocols.

Data Visualization of Item-Total Correlation by Median Smoothing

Directory of Open Access Journals (Sweden)

Chong Ho Yu

2016-02-01

Full Text Available This paper aims to illustrate how data visualization could be utilized to identify errors prior to modeling, using an example with multi-dimensional item response theory (MIRT. MIRT combines item response theory and factor analysis to identify a psychometric model that investigates two or more latent traits. While it may seem convenient to accomplish two tasks by employing one procedure, users should be cautious of problematic items that affect both factor analysis and IRT. When sample sizes are extremely large, reliability analyses can misidentify even random numbers as meaningful patterns. Data visualization, such as median smoothing, can be used to identify problematic items in preliminary data cleaning.

Deliberate ambiguity in a finite environment: The urban ecology of artificial items

Directory of Open Access Journals (Sweden)

Abraham Akkerman

2000-01-01

Full Text Available A distinction is made between visual declaration and virtual usage of artificial items within a physical environment, such as a street. Visual declaration is a formal pictorial designation, or a function, e.g. “decoration,” of an item, such as a “planter.” Virtual usage refers to the item when it is used in lieu of another item. The formal designation, “sitting,” customarily designated to an item such as “bench,” could also be a virtual usage of the item “planter.” The question asked is, “What is the relationship between items, given their formal, visual declaration and their informal, virtual, usage?” An artificial item, according to its visual declaration, is referred to as a ‘visual’ or ‘real item’. Each visual item has the property of being used as another item by virtue of its undeclared usage. Pending on the item's design and configuration, a visual item can be then substituted for another visual item. An artificial item, thus, attains deliberate ambiguity between its formal designation and its virtual usage. This ambiguity between visual declaration and virtual usage can be quantified. Within the full domain of n possible usages, this relationship can be conveniently presented in a nonnegative matrix. It is shown that the inverse of this matrix belongs to a class of well-known matrices. This being the case, the relationship between visual and virtual properties of items within the environment can be formalized. The formalization throws further light on the emerging opportunities in streetscape design.

Comparing Two Versions of the MEOCS Using Differential Item Functioning

National Research Council Canada - National Science Library

Truhon, Stephen

2003-01-01

...) from item response theory (IRT). DIF was found for the majority of the 40 items examined, although in many cases the DIF indicated improvements in the revised items. Implications for these scales and for the use of IRT with the MEOCS are discussed.

A simple and fast item selection procedure for adaptive testing

NARCIS (Netherlands)

Veerkamp, W.J.J.; Veerkamp, Wim J.J.; Berger, Martijn; Berger, Martijn P.F.

1994-01-01

Items with the highest discrimination parameter values in a logistic item response theory (IRT) model do not necessarily give maximum information. This paper shows which discrimination parameter values (as a function of the guessing parameter and the distance between person ability and item

Comparison of Alternate and Original Items on the Montreal Cognitive Assessment.

Science.gov (United States)

Lebedeva, Elena; Huang, Mei; Koski, Lisa

2016-03-01

The Montreal Cognitive Assessment (MoCA) is a screening tool for mild cognitive impairment (MCI) in elderly individuals. We hypothesized that measurement error when using the new alternate MoCA versions to monitor change over time could be related to the use of items that are not of comparable difficulty to their corresponding originals of similar content. The objective of this study was to compare the difficulty of the alternate MoCA items to the original ones. Five selected items from alternate versions of the MoCA were included with items from the original MoCA administered adaptively to geriatric outpatients (N = 78). Rasch analysis was used to estimate the difficulty level of the items. None of the five items from the alternate versions matched the difficulty level of their corresponding original items. This study demonstrates the potential benefits of a Rasch analysis-based approach for selecting items during the process of development of parallel forms. The results suggest that better match of the items from different MoCA forms by their difficulty would result in higher sensitivity to changes in cognitive function over time.

Bayes factor covariance testing in item response models

NARCIS (Netherlands)

Fox, J.P.; Mulder, J.; Sinharay, Sandip

2017-01-01

Two marginal one-parameter item response theory models are introduced, by integrating out the latent variable or random item parameter. It is shown that both marginal response models are multivariate (probit) models with a compound symmetry covariance structure. Several common hypotheses concerning

Bayes Factor Covariance Testing in Item Response Models

NARCIS (Netherlands)

Fox, Jean-Paul; Mulder, Joris; Sinharay, Sandip

2017-01-01

Two marginal one-parameter item response theory models are introduced, by integrating out the latent variable or random item parameter. It is shown that both marginal response models are multivariate (probit) models with a compound symmetry covariance structure. Several common hypotheses concerning

Interrogation of Detainees: Requirements of the Detainee Treatment Act

Science.gov (United States)

2009-08-26

providing legal protections and assistance to U.S. personnel subjected to legal action on account of their involvement in the authorized interrogation of...types of actions prohibited by the U.S. Constitution. There is some legal dispute as to whether CAT Article 16, as read in light of U.S. reservations... unconstitutionally harsh than it would use to assess whether those same techniques were unconstitutional if employed against an enemy combatant in a war zone

Inconstitucionalidad por inconmesurabilidad de modelos económicos: El caso de las tasas retributivas por contaminación

OpenAIRE

Pablo Márquez-Escobar

2004-01-01

The author studies the incommensurability of economic models as a type, little explored of unconstitutionality, called the unconstitutionality for incommensurability of economic models. The author statutes that many of Colombian rules relapse in this type of methodological error and due to the lack of attention regarding the economic technique, no one had referred to this phenomenon. To explain the concept, the author analyses the case of the recompensing taxes for contamination of natural re...

26 CFR 301.6222(a)-1 - Consistent treatment of partnership items.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Consistent treatment of partnership items. 301... Consistent treatment of partnership items. (a) In general. The treatment of a partnership item on the partner's return must be consistent with the treatment of that item by the partnership on the partnership...

Analyzing force concept inventory with item response theory

Science.gov (United States)

Wang, Jing; Bao, Lei

2010-10-01

Item response theory is a popular assessment method used in education. It rests on the assumption of a probability framework that relates students' innate ability and their performance on test questions. Item response theory transforms students' raw test scores into a scaled proficiency score, which can be used to compare results obtained with different test questions. The scaled score also addresses the issues of ceiling effects and guessing, which commonly exist in quantitative assessment. We used item response theory to analyze the force concept inventory (FCI). Our results show that item response theory can be useful for analyzing physics concept surveys such as the FCI and produces results about the individual questions and student performance that are beyond the capability of classical statistics. The theory yields detailed measurement parameters regarding the difficulty, discrimination features, and probability of correct guess for each of the FCI questions.

Line-item Budgeting and Film-Production

DEFF Research Database (Denmark)

Friis, Ivar; Hansen, Allan

2015-01-01

, which aided in protecting the director against the negative aspects of passion (e.g. distorted thought processes, myopia and weakness of will) in the creative process and in terms of the ability of the constraints to channel creativity in certain directions, thus preventing the availability of too many...... options from hampering the creative process. Originality/value – The paper contributes to management control research in two ways. By addressing calls to provide more insight into the positive effects management control constraints might have on creativity, this study explores somewhat ignored aspects...

Criteria for eliminating items of a Test of Figural Analogies

Directory of Open Access Journals (Sweden)

Diego Blum

2013-12-01

Full Text Available This paper describes the steps taken to eliminate two of the items in a Test of Figural Analogies (TFA. The main guidelines of psychometric analysis concerning Classical Test Theory (CTT and Item Response Theory (IRT are explained. The item elimination process was based on both the study of the CTT difficulty and discrimination index, and the unidimensionality analysis. The a, b, and c parameters of the Three Parameter Logistic Model of IRT were also considered for this purpose, as well as the assessment of each item fitting this model. The unfavourable characteristics of a group of TFA items are detailed, and decisions leading to their possible elimination are discussed.

Detection of Uniform and Nonuniform Differential Item Functioning by Item-Focused Trees

Science.gov (United States)

Berger, Moritz; Tutz, Gerhard

2016-01-01

Detection of differential item functioning (DIF) by use of the logistic modeling approach has a long tradition. One big advantage of the approach is that it can be used to investigate nonuniform (NUDIF) as well as uniform DIF (UDIF). The classical approach allows one to detect DIF by distinguishing between multiple groups. We propose an…

Development of six PROMIS pediatrics proxy-report item banks

Directory of Open Access Journals (Sweden)

Irwin Debra E

2012-02-01

Full Text Available Abstract Background Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS pediatric proxy-report item banks. Methods The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact. Caregivers (n = 25 of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads. Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432. In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Results Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%, married (70%, Caucasian (64% and had at least a high school education (94%. Approximately 50% had children with a chronic health condition, primarily

An improved non-Markovian degradation model with long-term dependency and item-to-item uncertainty

Science.gov (United States)

Xi, Xiaopeng; Chen, Maoyin; Zhang, Hanwen; Zhou, Donghua

2018-05-01

It is widely noted in the literature that the degradation should be simplified into a memoryless Markovian process for the purpose of predicting the remaining useful life (RUL). However, there actually exists the long-term dependency in the degradation processes of some industrial systems, including electromechanical equipments, oil tankers, and large blast furnaces. This implies the new degradation state depends not only on the current state, but also on the historical states. Such dynamic systems cannot be accurately described by traditional Markovian models. Here we present an improved non-Markovian degradation model with both the long-term dependency and the item-to-item uncertainty. As a typical non-stationary process with dependent increments, fractional Brownian motion (FBM) is utilized to simulate the fractal diffusion of practical degradations. The uncertainty among multiple items can be represented by a random variable of the drift. Based on this model, the unknown parameters are estimated through the maximum likelihood (ML) algorithm, while a closed-form solution to the RUL distribution is further derived using a weak convergence theorem. The practicability of the proposed model is fully verified by two real-world examples. The results demonstrate that the proposed method can effectively reduce the prediction error.

Mathematical-programming approaches to test item pool design

NARCIS (Netherlands)

Veldkamp, Bernard P.; van der Linden, Willem J.; Ariel, A.

2002-01-01

This paper presents an approach to item pool design that has the potential to improve on the quality of current item pools in educational and psychological testing andhence to increase both measurement precision and validity. The approach consists of the application of mathematical programming

17 CFR 229.1010 - (Item 1010) Financial statements.

Science.gov (United States)

2010-04-01

....1010 (Item 1010) Financial statements. (a) Financial information. Furnish the following financial information: (1) Audited financial statements for the two fiscal years required to be filed with the company's... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false (Item 1010) Financial...

Procedures for Selecting Items for Computerized Adaptive Tests.

Science.gov (United States)

Kingsbury, G. Gage; Zara, Anthony R.

1989-01-01

Several classical approaches and alternative approaches to item selection for computerized adaptive testing (CAT) are reviewed and compared. The study also describes procedures for constrained CAT that may be added to classical item selection approaches to allow them to be used for applied testing. (TJH)

Improving Measurement Efficiency of the Inner EAR Scale with Item Response Theory.

Science.gov (United States)

Jessen, Annika; Ho, Andrew D; Corrales, C Eduardo; Yueh, Bevan; Shin, Jennifer J

2018-02-01

Objectives (1) To assess the 11-item Inner Effectiveness of Auditory Rehabilitation (Inner EAR) instrument with item response theory (IRT). (2) To determine whether the underlying latent ability could also be accurately represented by a subset of the items for use in high-volume clinical scenarios. (3) To determine whether the Inner EAR instrument correlates with pure tone thresholds and word recognition scores. Design IRT evaluation of prospective cohort data. Setting Tertiary care academic ambulatory otolaryngology clinic. Subjects and Methods Modern psychometric methods, including factor analysis and IRT, were used to assess unidimensionality and item properties. Regression methods were used to assess prediction of word recognition and pure tone audiometry scores. Results The Inner EAR scale is unidimensional, and items varied in their location and information. Information parameter estimates ranged from 1.63 to 4.52, with higher values indicating more useful items. The IRT model provided a basis for identifying 2 sets of items with relatively lower information parameters. Item information functions demonstrated which items added insubstantial value over and above other items and were removed in stages, creating a 8- and 3-item Inner EAR scale for more efficient assessment. The 8-item version accurately reflected the underlying construct. All versions correlated moderately with word recognition scores and pure tone averages. Conclusion The 11-, 8-, and 3-item versions of the Inner EAR scale have strong psychometric properties, and there is correlational validity evidence for the observed scores. Modern psychometric methods can help streamline care delivery by maximizing relevant information per item administered.

QA in the procurement of items and services

International Nuclear Information System (INIS)

Wilhelm, H.

1980-01-01

Procurement of items and services is one of the important elements during the design and construction of Nuclear Power Plants. The purchaser has to establish and implement controls over the procurement process to ensure that the quality criteria, quality level and other quality requirements specified for the particuliar item or service are taken into account. The effect on safety of an error in service or the malfunction of an item is the most important factor to be considered in determining the extent of quality assurance efforts. A typical example of a procurement process will be demonstrated for safety related mechanical components. (orig./RW)

DIF Trees: Using Classification Trees to Detect Differential Item Functioning

Science.gov (United States)

Vaughn, Brandon K.; Wang, Qiu

2010-01-01

A nonparametric tree classification procedure is used to detect differential item functioning for items that are dichotomously scored. Classification trees are shown to be an alternative procedure to detect differential item functioning other than the use of traditional Mantel-Haenszel and logistic regression analysis. A nonparametric…

DRD4 long allele carriers show heightened attention to high-priority items relative to low-priority items.

Science.gov (United States)

Gorlick, Marissa A; Worthy, Darrell A; Knopik, Valerie S; McGeary, John E; Beevers, Christopher G; Maddox, W Todd

2015-03-01

Humans with seven or more repeats in exon III of the DRD4 gene (long DRD4 carriers) sometimes demonstrate impaired attention, as seen in attention-deficit hyperactivity disorder, and at other times demonstrate heightened attention, as seen in addictive behavior. Although the clinical effects of DRD4 are the focus of much work, this gene may not necessarily serve as a "risk" gene for attentional deficits, but as a plasticity gene where attention is heightened for priority items in the environment and impaired for minor items. Here we examine the role of DRD4 in two tasks that benefit from selective attention to high-priority information. We examine a category learning task where performance is supported by focusing on features and updating verbal rules. Here, selective attention to the most salient features is associated with good performance. In addition, we examine the Operation Span (OSPAN) task, a working memory capacity task that relies on selective attention to update and maintain items in memory while also performing a secondary task. Long DRD4 carriers show superior performance relative to short DRD4 homozygotes (six or less tandem repeats) in both the category learning and OSPAN tasks. These results suggest that DRD4 may serve as a "plasticity" gene where individuals with the long allele show heightened selective attention to high-priority items in the environment, which can be beneficial in the appropriate context.

Australian Chemistry Test Item Bank: Years 11 and 12. Volume 2.

Science.gov (United States)

Commons, C., Ed.; Martin, P., Ed.

The second volume of the Australian Chemistry Test Item Bank, consisting of two volumes, contains nearly 2000 multiple-choice items related to the chemistry taught in Year 11 and Year 12 courses in Australia. Items which were written during 1979 and 1980 were initially published in the "ACER Chemistry Test Item Collection" and in the…

The Body Appreciation Scale-2: item refinement and psychometric evaluation.

Science.gov (United States)

Tylka, Tracy L; Wood-Barcalow, Nichole L

2015-01-01

Considered a positive body image measure, the 13-item Body Appreciation Scale (BAS; Avalos, Tylka, & Wood-Barcalow, 2005) assesses individuals' acceptance of, favorable opinions toward, and respect for their bodies. While the BAS has accrued psychometric support, we improved it by rewording certain BAS items (to eliminate sex-specific versions and body dissatisfaction-based language) and developing additional items based on positive body image research. In three studies, we examined the reworded, newly developed, and retained items to determine their psychometric properties among college and online community (Amazon Mechanical Turk) samples of 820 women and 767 men. After exploratory factor analysis, we retained 10 items (five original BAS items). Confirmatory factor analysis upheld the BAS-2's unidimensionality and invariance across sex and sample type. Its internal consistency, test-retest reliability, and construct (convergent, incremental, and discriminant) validity were supported. The BAS-2 is a psychometrically sound positive body image measure applicable for research and clinical settings. Copyright © 2014 Elsevier Ltd. All rights reserved.

Order information in verbal working memory shifts the subjective midpoint in both the line bisection and the landmark tasks.

Science.gov (United States)

Antoine, Sophie; Ranzini, Mariagrazia; Gebuis, Titia; van Dijck, Jean-Philippe; Gevers, Wim

2017-10-01

A largely substantiated view in the domain of working memory is that the maintenance of serial order is achieved by generating associations of each item with an independent representation of its position, so-called position markers. Recent studies reported that the ordinal position of an item in verbal working memory interacts with spatial processing. This suggests that position markers might be spatial in nature. However, these interactions were so far observed in tasks implying a clear binary categorization of space (i.e., with left and right responses or targets). Such binary categorizations leave room for alternative interpretations, such as congruency between non-spatial categorical codes for ordinal position (e.g., begin and end) and spatial categorical codes for response (e.g., left and right). Here we discard this interpretation by providing evidence that this interaction can also be observed in a task that draws upon a continuous processing of space, the line bisection task. Specifically, bisections are modulated by ordinal position in verbal working memory, with lines bisected more towards the right after retrieving items from the end compared to the beginning of the memorized sequence. This supports the idea that position markers are intrinsically spatial in nature.

Difference in method of administration did not significantly impact item response

DEFF Research Database (Denmark)

Bjorner, Jakob B; Rose, Matthias; Gandek, Barbara

2014-01-01

assistant (PDA), or personal computer (PC) on the Internet, and a second form by PC, in the same administration. Structural invariance, equivalence of item responses, and measurement precision were evaluated using confirmatory factor analysis and item response theory methods. RESULTS: Multigroup...... levels in IVR, PQ, or PDA administration as compared to PC. Availability of large item response theory-calibrated PROMIS item banks allowed for innovations in study design and analysis.......PURPOSE: To test the impact of method of administration (MOA) on the measurement characteristics of items developed in the Patient-Reported Outcomes Measurement Information System (PROMIS). METHODS: Two non-overlapping parallel 8-item forms from each of three PROMIS domains (physical function...

PENGEMBANGAN TES BERPIKIR KRITIS DENGAN PENDEKATAN ITEM RESPONSE THEORY

Directory of Open Access Journals (Sweden)

Fajrianthi Fajrianthi

2016-06-01

Full Text Available Penelitian ini bertujuan untuk menghasilkan sebuah alat ukur (tes berpikir kritis yang valid dan reliabel untuk digunakan, baik dalam lingkup pendidikan maupun kerja di Indonesia. Tahapan penelitian dilakukan berdasarkan tahap pengembangan tes menurut Hambleton dan Jones (1993. Kisi-kisi dan pembuatan butir didasarkan pada konsep dalam tes Watson-Glaser Critical Thinking Appraisal (WGCTA. Pada WGCTA, berpikir kritis terdiri dari lima dimensi yaitu Inference, Recognition Assumption, Deduction, Interpretation dan Evaluation of arguments. Uji coba tes dilakukan pada 1.453 peserta tes seleksi karyawan di Surabaya, Gresik, Tuban, Bojonegoro, Rembang. Data dikotomi dianalisis dengan menggunakan model IRT dengan dua parameter yaitu daya beda dan tingkat kesulitan butir. Analisis dilakukan dengan menggunakan program statistik Mplus versi 6.11 Sebelum melakukan analisis dengan IRT, dilakukan pengujian asumsi yaitu uji unidimensionalitas, independensi lokal dan Item Characteristic Curve (ICC. Hasil analisis terhadap 68 butir menghasilkan 15 butir dengan daya beda yang cukup baik dan tingkat kesulitan butir yang berkisar antara –4 sampai dengan 2.448. Sedikitnya jumlah butir yang berkualitas baik disebabkan oleh kelemahan dalam menentukan subject matter experts di bidang berpikir kritis dan pemilihan metode skoring. Kata kunci: Pengembangan tes, berpikir kritis, item response theory   DEVELOPING CRITICAL THINKING TEST UTILISING ITEM RESPONSE THEORY Abstract The present study was aimed to develop a valid and reliable instrument in assesing critical thinking which can be implemented both in educational and work settings in Indonesia. Following the Hambleton and Jones’s (1993 procedures on test development, the study developed the instrument by employing the concept of critical thinking from Watson-Glaser Critical Thinking Appraisal (WGCTA. The study included five dimensions of critical thinking as adopted from the WGCTA: Inference, Recognition

Item response theory at subject- and group-level

NARCIS (Netherlands)

Tobi, Hilde

1990-01-01

This paper reviews the literature about item response models for the subject level and aggregated level (group level). Group-level item response models (IRMs) are used in the United States in large-scale assessment programs such as the National Assessment of Educational Progress and the California

48 CFR 52.212-2 - Evaluation-Commercial Items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Evaluation-Commercial....212-2 Evaluation—Commercial Items. As prescribed in 12.301(c), the Contracting Officer may insert a provision substantially as follows: Evaluation—Commercial Items (JAN 1999) (a) The Government will award a...

Loglinear multidimensional IRT models for polytomously scored items

NARCIS (Netherlands)

Kelderman, Henk; Rijkes, Carl P.M.; Rijkes, Carl

1994-01-01

A loglinear IRT model is proposed that relates polytomously scored item responses to a multidimensional latent space. The analyst may specify a response function for each response, indicating which latent abilities are necessary to arrive at that response. Each item may have a different number of

Item Response Theory Models for Wording Effects in Mixed-Format Scales

Science.gov (United States)

Wang, Wen-Chung; Chen, Hui-Fang; Jin, Kuan-Yu

2015-01-01

Many scales contain both positively and negatively worded items. Reverse recoding of negatively worded items might not be enough for them to function as positively worded items do. In this study, we commented on the drawbacks of existing approaches to wording effect in mixed-format scales and used bi-factor item response theory (IRT) models to…

16 CFR 304.5 - Marking requirements for imitation political items.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Marking requirements for imitation political... imitation political items. (a) An imitation political item which is manufactured in the United States, or...) An imitation political item of incusable material shall be incused with the calendar year in sans...

Evaluating an Automated Number Series Item Generator Using Linear Logistic Test Models

Directory of Open Access Journals (Sweden)

Bao Sheng Loe

2018-04-01

Full Text Available This study investigates the item properties of a newly developed Automatic Number Series Item Generator (ANSIG. The foundation of the ANSIG is based on five hypothesised cognitive operators. Thirteen item models were developed using the numGen R package and eleven were evaluated in this study. The 16-item ICAR (International Cognitive Ability Resource1 short form ability test was used to evaluate construct validity. The Rasch Model and two Linear Logistic Test Model(s (LLTM were employed to estimate and predict the item parameters. Results indicate that a single factor determines the performance on tests composed of items generated by the ANSIG. Under the LLTM approach, all the cognitive operators were significant predictors of item difficulty. Moderate to high correlations were evident between the number series items and the ICAR test scores, with high correlation found for the ICAR Letter-Numeric-Series type items, suggesting adequate nomothetic span. Extended cognitive research is, nevertheless, essential for the automatic generation of an item pool with predictable psychometric properties.

Improving measurement of injection drug risk behavior using item response theory.

Science.gov (United States)

Janulis, Patrick

2014-03-01

Recent research highlights the multiple steps to preparing and injecting drugs and the resultant viral threats faced by drug users. This research suggests that more sensitive measurement of injection drug HIV risk behavior is required. In addition, growing evidence suggests there are gender differences in injection risk behavior. However, the potential for differential item functioning between genders has not been explored. To explore item response theory as an improved measurement modeling technique that provides empirically justified scaling of injection risk behavior and to examine for potential gender-based differential item functioning. Data is used from three studies in the National Institute on Drug Abuse's Criminal Justice Drug Abuse Treatment Studies. A two-parameter item response theory model was used to scale injection risk behavior and logistic regression was used to examine for differential item functioning. Item fit statistics suggest that item response theory can be used to scale injection risk behavior and these models can provide more sensitive estimates of risk behavior. Additionally, gender-based differential item functioning is present in the current data. Improved measurement of injection risk behavior using item response theory should be encouraged as these models provide increased congruence between construct measurement and the complexity of injection-related HIV risk. Suggestions are made to further improve injection risk behavior measurement. Furthermore, results suggest direct comparisons of composite scores between males and females may be misleading and future work should account for differential item functioning before comparing levels of injection risk behavior.

Medial temporal lobe contributions to cued retrieval of items and contexts.

Science.gov (United States)

Hannula, Deborah E; Libby, Laura A; Yonelinas, Andrew P; Ranganath, Charan

2013-10-01

Several models have proposed that different regions of the medial temporal lobes contribute to different aspects of episodic memory. For instance, according to one view, the perirhinal cortex represents specific items, parahippocampal cortex represents information regarding the context in which these items were encountered, and the hippocampus represents item-context bindings. Here, we used event-related functional magnetic resonance imaging (fMRI) to test a specific prediction of this model-namely, that successful retrieval of items from context cues will elicit perirhinal recruitment and that successful retrieval of contexts from item cues will elicit parahippocampal cortex recruitment. Retrieval of the bound representation in either case was expected to elicit hippocampal engagement. To test these predictions, we had participants study several item-context pairs (i.e., pictures of objects and scenes, respectively), and then had them attempt to recall items from associated context cues and contexts from associated item cues during a scanned retrieval session. Results based on both univariate and multivariate analyses confirmed a role for hippocampus in content-general relational memory retrieval, and a role for parahippocampal cortex in successful retrieval of contexts from item cues. However, we also found that activity differences in perirhinal cortex were correlated with successful cued recall for both items and contexts. These findings provide partial support for the above predictions and are discussed with respect to several models of medial temporal lobe function. Copyright © 2013 Elsevier Ltd. All rights reserved.

Medial Temporal Lobe Contributions to Cued Retrieval of Items and Contexts

Science.gov (United States)

Hannula, Deborah E.; Libby, Laura A.; Yonelinas, Andrew P.; Ranganath, Charan

2013-01-01

Several models have proposed that different regions of the medial temporal lobes contribute to different aspects of episodic memory. For instance, according to one view, the perirhinal cortex represents specific items, parahippocampal cortex represents information regarding the context in which these items were encountered, and the hippocampus represents item-context bindings. Here, we used event-related functional magnetic resonance imaging (fMRI) to test a specific prediction of this model – namely, that successful retrieval of items from context cues will elicit perirhinal recruitment and that successful retrieval of contexts from item cues will elicit parahippocampal cortex recruitment. Retrieval of the bound representation in either case was expected to elicit hippocampal engagement. To test these predictions, we had participants study several item-context pairs (i.e., pictures of objects and scenes, respectively), and then had them attempt to recall items from associated context cues and contexts from associated item cues during a scanned retrieval session. Results based on both univariate and multivariate analyses confirmed a role for hippocampus in content-general relational memory retrieval, and a role for parahippocampal cortex in successful retrieval of contexts from item cues. However, we also found that activity differences in perirhinal cortex were correlated with successful cued recall for both items and contexts. These findings provide partial support for the above predictions and are discussed with respect to several models of medial temporal lobe function. PMID:23466350

A scale purification procedure for evaluation of differential item functioning

NARCIS (Netherlands)

Khalid, Muhammad Naveed; Glas, Cornelis A.W.

2014-01-01

Item bias or differential item functioning (DIF) has an important impact on the fairness of psychological and educational testing. In this paper, DIF is seen as a lack of fit to an item response (IRT) model. Inferences about the presence and importance of DIF require a process of so-called test

ACER Chemistry Test Item Collection (ACER CHEMTIC Year 12 Supplement).

Science.gov (United States)

Australian Council for Educational Research, Hawthorn.

This publication contains 317 multiple-choice chemistry test items related to topics covered in the Victorian (Australia) Year 12 chemistry course. It allows teachers access to a range of items suitable for diagnostic and achievement purposes, supplementing the ACER Chemistry Test Item Collection--Year 12 (CHEMTIC). The topics covered are: organic…

48 CFR 53.212 - Acquisition of commercial items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Acquisition of commercial... (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.212 Acquisition of commercial items. SF 1449 (Rev. 3/2005), Solicitation/Contract/Order for Commercial Items. SF 1449 is prescribed for use in...

The utility of single-item readiness screeners in middle school.

Science.gov (United States)

Lewis, Crystal G; Herman, Keith C; Huang, Francis L; Stormont, Melissa; Grossman, Caroline; Eddy, Colleen; Reinke, Wendy M

2017-10-01

This study examined the benefit of utilizing one-item academic and one-item behavior readiness teacher-rated screeners at the beginning of the school year to predict end-of-school year outcomes for middle school students. The Middle School Academic and Behavior Readiness (M-ABR) screeners were developed to provide an efficient and effective way to assess readiness in students. Participants included 889 students in 62 middle school classrooms in an urban Missouri school district. Concurrent validity with the M-ABR items and other indicators of readiness in the fall were evaluated using Pearson product-moment correlation coefficients, with the academic readiness item having medium to strong correlations with other baseline academic indicators (r=±0.56 to 0.91) and the behavior readiness item having low to strong correlations with baseline behavior items (r=±0.20 to 0.79). Next, the predictive validity of the M-ABR items was analyzed with hierarchical linear regressions using end-of-year outcomes as the dependent variable. The academic and behavior readiness items demonstrated adequate validity for all outcomes with moderate effects (β=±0.31 to 0.73 for academic outcomes and β=±0.24 to 0.59 for behavioral outcomes) after controlling for baseline demographics. Even after controlling for baseline scores, the M-ABR items predicted unique variance in almost all outcome variables. Four conditional probability indices were calculated to obtain an optimal cut score, to determine ready vs. not ready, for both single-item M-ABR scales. The cut point of "fair" yielded the most acceptable values for the indices. The odd ratios (OR) of experiencing negative outcomes given a "fair" or lower readiness rating (2 or below on the M-ABR screeners) at the beginning of the year were significant and strong for all outcomes (OR=2.29 to OR=14.46), except for internalizing problems. These findings suggest promise for using single readiness items to screen for varying negative end

Method of locating related items in a geometric space for data mining

Science.gov (United States)

Hendrickson, Bruce A.

1999-01-01

A method for locating related items in a geometric space transforms relationships among items to geometric locations. The method locates items in the geometric space so that the distance between items corresponds to the degree of relatedness. The method facilitates communication of the structure of the relationships among the items. The method is especially beneficial for communicating databases with many items, and with non-regular relationship patterns. Examples of such databases include databases containing items such as scientific papers or patents, related by citations or keywords. A computer system adapted for practice of the present invention can include a processor, a storage subsystem, a display device, and computer software to direct the location and display of the entities. The method comprises assigning numeric values as a measure of similarity between each pairing of items. A matrix is constructed, based on the numeric values. The eigenvectors and eigenvalues of the matrix are determined. Each item is located in the geometric space at coordinates determined from the eigenvectors and eigenvalues. Proper construction of the matrix and proper determination of coordinates from eigenvectors can ensure that distance between items in the geometric space is representative of the numeric value measure of the items' similarity.

An Efficient Way to Detect Poststroke Depression by Subsequent Administration of a 9-Item and a 2-Item Patient Health Questionnaire

NARCIS (Netherlands)

de Man-van Ginkel, Janneke M.; Hafsteinsdottir, Thora; Lindeman, Eline; Burger, Huibert; Grobbee, Diederick; Schuurmans, Marieke

Background and Purpose-The early detection of poststroke depression is essential for optimizing recovery after stroke. A prospective study was conducted to investigate the diagnostic value of the 9-item and the 2-item Patient Health Questionnaire (PHQ-9, PHQ-2). Methods-One hundred seventy-one

Cross-National Prevalence of Traditional Bullying, Traditional Victimization, Cyberbullying and Cyber-Victimization: Comparing Single-Item and Multiple-Item Approaches of Measurement

Science.gov (United States)

Yanagida, Takuya; Gradinger, Petra; Strohmeier, Dagmar; Solomontos-Kountouri, Olga; Trip, Simona; Bora, Carmen

2016-01-01

Many large-scale cross-national studies rely on a single-item measurement when comparing prevalence rates of traditional bullying, traditional victimization, cyberbullying, and cyber-victimization between countries. However, the reliability and validity of single-item measurement approaches are highly problematic and might be biased. Data from…

Storage options for Long Length Contaminated Equipment (LLCE) items

International Nuclear Information System (INIS)

Hodgson, R.D.

1994-11-01

A review of the Washington state requirements for the storage of long equipment items removed from tanks indicate that if the contaminated materials on the long equipment items are analyzed and determined to be DW, and not EHW, the containers can be stored on an uncovered, RCRA approved, storage pad. Long equipment items contaminated with reportable levels of EHW, or suspected of being contaminated with EHW, must be protected from the elements by means of a building or other protective covering that otherwise allows adequate inspection of the containers. Storage of the long equipment item containers on an uncovered storage pad is recommended and will reduce construction costs for new storage by an estimated 60 percent when compared to construction costs for enclosed storage

Gender Invariance of the Gambling Behavior Scale for Adolescents (GBS-A): An Analysis of Differential Item Functioning Using Item Response Theory.

Science.gov (United States)

Donati, Maria Anna; Chiesi, Francesca; Izzo, Viola A; Primi, Caterina

2017-01-01

As there is a lack of evidence attesting the equivalent item functioning across genders for the most employed instruments used to measure pathological gambling in adolescence, the present study was aimed to test the gender invariance of the Gambling Behavior Scale for Adolescents (GBS-A), a new measurement tool to assess the severity of Gambling Disorder (GD) in adolescents. The equivalence of the items across genders was assessed by analyzing Differential Item Functioning within an Item Response Theory framework. The GBS-A was administered to 1,723 adolescents, and the graded response model was employed. The results attested the measurement equivalence of the GBS-A when administered to male and female adolescent gamblers. Overall, findings provided evidence that the GBS-A is an effective measurement tool of the severity of GD in male and female adolescents and that the scale was unbiased and able to relieve truly gender differences. As such, the GBS-A can be profitably used in educational interventions and clinical treatments with young people.

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

International Nuclear Information System (INIS)

OBRIEN, J.H.

2000-01-01

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments

Safety Evaluation for Packaging (onsite) T Plant Canyon Items

Energy Technology Data Exchange (ETDEWEB)

OBRIEN, J.H.

2000-07-14

This safety evaluation for packaging (SEP) evaluates and documents the ability to safely ship mostly unique inventories of miscellaneous T Plant canyon waste items (T-P Items) encountered during the canyon deck clean off campaign. In addition, this SEP addresses contaminated items and material that may be shipped in a strong tight package (STP). The shipments meet the criteria for onsite shipments as specified by Fluor Hanford in HNF-PRO-154, Responsibilities and Procedures for all Hazardous Material Shipments.

Reliability and validity of the Spanish version of the 10-item Connor-Davidson Resilience Scale (10-item CD-RISC in young adults

Directory of Open Access Journals (Sweden)

García-Campayo Javier

2011-08-01

Full Text Available Abstract Background The 10-item Connor-Davidson Resilience Scale (10-item CD-RISC is an instrument for measuring resilience that has shown good psychometric properties in its original version in English. The aim of this study was to evaluate the validity and reliability of the Spanish version of the 10-item CD-RISC in young adults and to verify whether it is structured in a single dimension as in the original English version. Findings Cross-sectional observational study including 681 university students ranging in age from 18 to 30 years. The number of latent factors in the 10 items of the scale was analyzed by exploratory factor analysis. Confirmatory factor analysis was used to verify whether a single factor underlies the 10 items of the scale as in the original version in English. The convergent validity was analyzed by testing whether the mean of the scores of the mental component of SF-12 (MCS and the quality of sleep as measured with the Pittsburgh Sleep Index (PSQI were higher in subjects with better levels of resilience. The internal consistency of the 10-item CD-RISC was estimated using the Cronbach α test and test-retest reliability was estimated with the intraclass correlation coefficient. The Cronbach α coefficient was 0.85 and the test-retest intraclass correlation coefficient was 0.71. The mean MCS score and the level of quality of sleep in both men and women were significantly worse in subjects with lower resilience scores. Conclusions The Spanish version of the 10-item CD-RISC showed good psychometric properties in young adults and thus can be used as a reliable and valid instrument for measuring resilience. Our study confirmed that a single factor underlies the resilience construct, as was the case of the original scale in English.

The Influence of Item Properties on Association-Memory

Science.gov (United States)

Madan, Christopher R.; Glaholt, Mackenzie G.; Caplan, Jeremy B.

2010-01-01

Word properties like imageability and word frequency improve cued recall of verbal paired-associates. We asked whether these enhancements follow simply from prior effects on item-memory, or also strengthen associations between items. Participants studied word pairs varying in imageability or frequency: pairs were "pure" (high-high, low-low) or…

The constitutional control system in Colombia

OpenAIRE

Luis Javier Moreno Ortiz

2010-01-01

The system of constitutional control in Colombia designed in the Legislative Act n.º 3 of 1910 is a milestone in a long and fruitful political and constitutional tradition owes much to his Hispanic roots and its American developments. Both the public action of unconstitutionality as the plea of unconstitutionality have clear precedents in the constitutionalism of Spain and the Colony were prepared by a Constituent Assembly acted with knowledge and faithfulness to that tradition and have been ...

Assessment of Differential Item Functioning in the Experiences of Discrimination Index

Science.gov (United States)

Cunningham, Timothy J.; Berkman, Lisa F.; Gortmaker, Steven L.; Kiefe, Catarina I.; Jacobs, David R.; Seeman, Teresa E.; Kawachi, Ichiro

2011-01-01

The psychometric properties of instruments used to measure self-reported experiences of discrimination in epidemiologic studies are rarely assessed, especially regarding construct validity. The authors used 2000–2001 data from the Coronary Artery Risk Development in Young Adults (CARDIA) Study to examine differential item functioning (DIF) in 2 versions of the Experiences of Discrimination (EOD) Index, an index measuring self-reported experiences of racial/ethnic and gender discrimination. DIF may confound interpretation of subgroup differences. Large DIF was observed for 2 of 7 racial/ethnic discrimination items: White participants reported more racial/ethnic discrimination for the “at school” item, and black participants reported more racial/ethnic discrimination for the “getting housing” item. The large DIF by race/ethnicity in the index for racial/ethnic discrimination probably reflects item impact and is the result of valid group differences between blacks and whites regarding their respective experiences of discrimination. The authors also observed large DIF by race/ethnicity for 3 of 7 gender discrimination items. This is more likely to have been due to item bias. Users of the EOD Index must consider the advantages and disadvantages of DIF adjustment (omitting items, constructing separate measures, and retaining items). The EOD Index has substantial usefulness as an instrument that can assess self-reported experiences of discrimination. PMID:22038104

41 CFR 101-30.101-1a - Item of production.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Item of production. 101-30.101-1a Section 101-30.101-1a Public Contracts and Property Management Federal Property Management....1-General § 101-30.101-1a Item of production. Item-of-production means those articles, equipment...

Selecting Lower Priced Items.

Science.gov (United States)

Kleinert, Harold L.; And Others

1988-01-01

A program used to teach moderately to severely mentally handicapped students to select the lower priced items in actual shopping activities is described. Through a five-phase process, students are taught to compare prices themselves as well as take into consideration variations in the sizes of containers and varying product weights. (VW)

Overview of classical test theory and item response theory for the quantitative assessment of items in developing patient-reported outcomes measures.

Science.gov (United States)

Cappelleri, Joseph C; Jason Lundy, J; Hays, Ron D

2014-05-01

The US Food and Drug Administration's guidance for industry document on patient-reported outcomes (PRO) defines content validity as "the extent to which the instrument measures the concept of interest" (FDA, 2009, p. 12). According to Strauss and Smith (2009), construct validity "is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity" (p. 7). Hence, both qualitative and quantitative information are essential in evaluating the validity of measures. We review classical test theory and item response theory (IRT) approaches to evaluating PRO measures, including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized "difficulty" (severity) order of items is represented by observed responses. If a researcher has few qualitative data and wants to get preliminary information about the content validity of the instrument, then descriptive assessments using classical test theory should be the first step. As the sample size grows during subsequent stages of instrument development, confidence in the numerical estimates from Rasch and other IRT models (as well as those of classical test theory) would also grow. Classical test theory and IRT can be useful in providing a quantitative assessment of items and scales during the content-validity phase of PRO-measure development. Depending on the particular type of measure and the specific circumstances, the classical test theory and/or the IRT should be considered to help maximize the content validity of PRO measures. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

Test Score Equating Using Discrete Anchor Items versus Passage-Based Anchor Items: A Case Study Using "SAT"® Data. Research Report. ETS RR-14-14

Science.gov (United States)

Liu, Jinghua; Zu, Jiyun; Curley, Edward; Carey, Jill

2014-01-01

The purpose of this study is to investigate the impact of discrete anchor items versus passage-based anchor items on observed score equating using empirical data.This study compares an "SAT"® critical reading anchor that contains more discrete items proportionally, compared to the total tests to be equated, to another anchor that…

Applying modern psychometric techniques to melodic discrimination testing: Item response theory, computerised adaptive testing, and automatic item generation.

Science.gov (United States)

Harrison, Peter M C; Collins, Tom; Müllensiefen, Daniel

2017-06-15

Modern psychometric theory provides many useful tools for ability testing, such as item response theory, computerised adaptive testing, and automatic item generation. However, these techniques have yet to be integrated into mainstream psychological practice. This is unfortunate, because modern psychometric techniques can bring many benefits, including sophisticated reliability measures, improved construct validity, avoidance of exposure effects, and improved efficiency. In the present research we therefore use these techniques to develop a new test of a well-studied psychological capacity: melodic discrimination, the ability to detect differences between melodies. We calibrate and validate this test in a series of studies. Studies 1 and 2 respectively calibrate and validate an initial test version, while Studies 3 and 4 calibrate and validate an updated test version incorporating additional easy items. The results support the new test's viability, with evidence for strong reliability and construct validity. We discuss how these modern psychometric techniques may also be profitably applied to other areas of music psychology and psychological science in general.

A note on monotonicity of item response functions for ordered polytomous item response theory models.

Science.gov (United States)

Kang, Hyeon-Ah; Su, Ya-Hui; Chang, Hua-Hua

2018-03-08

A monotone relationship between a true score (τ) and a latent trait level (θ) has been a key assumption for many psychometric applications. The monotonicity property in dichotomous response models is evident as a result of a transformation via a test characteristic curve. Monotonicity in polytomous models, in contrast, is not immediately obvious because item response functions are determined by a set of response category curves, which are conceivably non-monotonic in θ. The purpose of the present note is to demonstrate strict monotonicity in ordered polytomous item response models. Five models that are widely used in operational assessments are considered for proof: the generalized partial credit model (Muraki, 1992, Applied Psychological Measurement, 16, 159), the nominal model (Bock, 1972, Psychometrika, 37, 29), the partial credit model (Masters, 1982, Psychometrika, 47, 147), the rating scale model (Andrich, 1978, Psychometrika, 43, 561), and the graded response model (Samejima, 1972, A general model for free-response data (Psychometric Monograph no. 18). Psychometric Society, Richmond). The study asserts that the item response functions in these models strictly increase in θ and thus there exists strict monotonicity between τ and θ under certain specified conditions. This conclusion validates the practice of customarily using τ in place of θ in applied settings and provides theoretical grounds for one-to-one transformations between the two scales. © 2018 The British Psychological Society.

Validation of the Spanish versions of the long (26 items) and short (12 items) forms of the Self-Compassion Scale (SCS).

Science.gov (United States)

Garcia-Campayo, Javier; Navarro-Gil, Mayte; Andrés, Eva; Montero-Marin, Jesús; López-Artal, Lorena; Demarzo, Marcelo Marcos Piva

2014-01-10

Self-compassion is a key psychological construct for assessing clinical outcomes in mindfulness-based interventions. The aim of this study was to validate the Spanish versions of the long (26 item) and short (12 item) forms of the Self-Compassion Scale (SCS). The translated Spanish versions of both subscales were administered to two independent samples: Sample 1 was comprised of university students (n = 268) who were recruited to validate the long form, and Sample 2 was comprised of Aragon Health Service workers (n = 271) who were recruited to validate the short form. In addition to SCS, the Mindful Attention Awareness Scale (MAAS), the State-Trait Anxiety Inventory-Trait (STAI-T), the Beck Depression Inventory (BDI) and the Perceived Stress Questionnaire (PSQ) were administered. Construct validity, internal consistency, test-retest reliability and convergent validity were tested. The Confirmatory Factor Analysis (CFA) of the long and short forms of the SCS confirmed the original six-factor model in both scales, showing goodness of fit. Cronbach's α for the 26 item SCS was 0.87 (95% CI = 0.85-0.90) and ranged between 0.72 and 0.79 for the 6 subscales. Cronbach's α for the 12-item SCS was 0.85 (95% CI = 0.81-0.88) and ranged between 0.71 and 0.77 for the 6 subscales. The long (26-item) form of the SCS showed a test-retest coefficient of 0.92 (95% CI = 0.89-0.94). The Intraclass Correlation (ICC) for the 6 subscales ranged from 0.84 to 0.93. The short (12-item) form of the SCS showed a test-retest coefficient of 0.89 (95% CI: 0.87-0.93). The ICC for the 6 subscales ranged from 0.79 to 0.91. The long and short forms of the SCS exhibited a significant negative correlation with the BDI, the STAI and the PSQ, and a significant positive correlation with the MAAS. The correlation between the total score of the long and short SCS form was r = 0.92. The Spanish versions of the long (26-item) and short (12-item) forms of the SCS are valid and

Exploring differential item functioning (DIF) with the Rasch model: a comparison of gender differences on eighth grade science items in the United States and Spain.

Science.gov (United States)

Babiar, Tasha Calvert

2011-01-01

Traditionally, women and minorities have not been fully represented in science and engineering. Numerous studies have attributed these differences to gaps in science achievement as measured by various standardized tests. Rather than describe mean group differences in science achievement across multiple cultures, this study focused on an in-depth item-level analysis across two countries: Spain and the United States. This study investigated eighth-grade gender differences on science items across the two countries. A secondary purpose of the study was to explore the nature of gender differences using the many-faceted Rasch Model as a way to estimate gender DIF. A secondary analysis of data from the Third International Mathematics and Science Study (TIMSS) was used to address three questions: 1) Does gender DIF in science achievement exist? 2) Is there a relationship between gender DIF and characteristics of the science items? 3) Do the relationships between item characteristics and gender DIF in science items replicate across countries. Participants included 7,087 eight grade students from the United States and 3,855 students from Spain who participated in TIMSS. The Facets program (Linacre and Wright, 1992) was used to estimate gender DIF. The results of the analysis indicate that the content of the item seemed to be related to gender DIF. The analysis also suggests that there is a relationship between gender DIF and item format. No pattern of gender DIF related to cognitive demand was found. The general pattern of gender DIF was similar across the two countries used in the analysis. The strength of item-level analysis as opposed to group mean difference analysis is that gender differences can be detected at the item level, even when no mean differences can be detected at the group level.

An item-oriented recommendation algorithm on cold-start problem

Science.gov (United States)

Qiu, Tian; Chen, Guang; Zhang, Zi-Ke; Zhou, Tao

2011-09-01

Based on a hybrid algorithm incorporating the heat conduction and probability spreading processes (Proc. Natl. Acad. Sci. U.S.A., 107 (2010) 4511), in this letter, we propose an improved method by introducing an item-oriented function, focusing on solving the dilemma of the recommendation accuracy between the cold and popular items. Differently from previous works, the present algorithm does not require any additional information (e.g., tags). Further experimental results obtained in three real datasets, RYM, Netflix and MovieLens, show that, compared with the original hybrid method, the proposed algorithm significantly enhances the recommendation accuracy of the cold items, while it keeps the recommendation accuracy of the overall and the popular items. This work might shed some light on both understanding and designing effective methods for long-tailed online applications of recommender systems.

Building an Evaluation Scale using Item Response Theory.

Science.gov (United States)

Lalor, John P; Wu, Hao; Yu, Hong

2016-11-01

Evaluation of NLP methods requires testing against a previously vetted gold-standard test set and reporting standard metrics (accuracy/precision/recall/F1). The current assumption is that all items in a given test set are equal with regards to difficulty and discriminating power. We propose Item Response Theory (IRT) from psychometrics as an alternative means for gold-standard test-set generation and NLP system evaluation. IRT is able to describe characteristics of individual items - their difficulty and discriminating power - and can account for these characteristics in its estimation of human intelligence or ability for an NLP task. In this paper, we demonstrate IRT by generating a gold-standard test set for Recognizing Textual Entailment. By collecting a large number of human responses and fitting our IRT model, we show that our IRT model compares NLP systems with the performance in a human population and is able to provide more insight into system performance than standard evaluation metrics. We show that a high accuracy score does not always imply a high IRT score, which depends on the item characteristics and the response pattern.

Procurement Engineering Process for Commercial Grade Item Dedication

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

Intentional forgetting reduces color-naming interference: evidence from item-method directed forgetting.

Science.gov (United States)

Lee, Yuh-Shiow; Lee, Huang-Mou; Fawcett, Jonathan M

2013-01-01

In an item-method-directed forgetting task, Chinese words were presented individually, each followed by an instruction to remember or forget. Colored probe items were presented following each memory instruction requiring a speeded color-naming response. Half of the probe items were novel and unrelated to the preceding study item, whereas the remaining half of the probe items were a repetition of the preceding study item. Repeated probe items were either identical to the preceding study item (E1, E2), a phonetic reproduction of the preceding study item (E3), or perceptually matched to the preceding study item (E4). Color-naming interference was calculated by subtracting color-naming reaction times made in response to a string of meaningless symbols from that of the novel and repeated conditions. Across all experiments, participants recalled more to-be-remembered (TBR) than to-be-forgotten (TBF) study words. More importantly, Experiments 1 and 2 found that color-naming interference was reduced for repeated TBF words relative to repeated TBR words. Experiments 3 and 4 further found that this effect occurred at the perceptual rather than semantic level. These findings suggest that participants may bias processing resources away from the perceptual representation of to-be-forgotten information.

Analysis Test of Understanding of Vectors with the Three-Parameter Logistic Model of Item Response Theory and Item Response Curves Technique

Science.gov (United States)

Rakkapao, Suttida; Prasitpong, Singha; Arayathanitkul, Kwan

2016-01-01

This study investigated the multiple-choice test of understanding of vectors (TUV), by applying item response theory (IRT). The difficulty, discriminatory, and guessing parameters of the TUV items were fit with the three-parameter logistic model of IRT, using the parscale program. The TUV ability is an ability parameter, here estimated assuming…

Cash Impact of the Consumable Item Transfer, Phase II

National Research Council Canada - National Science Library

1998-01-01

...). This report is the third in a series of reports regarding the consumable item transfer (CIT), phase II. The Deputy Secretary of Defense directed the transfer of the management of consumable items to Defense Logistics Agency...

A confirmative clinimetric analysis of the 36-item Family Assessment Device.

Science.gov (United States)

Timmerby, Nina; Cosci, Fiammetta; Watson, Maggie; Csillag, Claudio; Schmitt, Florence; Steck, Barbara; Bech, Per; Thastum, Mikael

2018-02-07

The Family Assessment Device (FAD) is a 60-item questionnaire widely used to evaluate self-reported family functioning. However, the factor structure as well as the number of items has been questioned. A shorter and more user-friendly version of the original FAD-scale, the 36-item FAD, has therefore previously been proposed, based on findings in a nonclinical population of adults. We aimed in this study to evaluate the brief 36-item version of the FAD in a clinical population. Data from a European multinational study, examining factors associated with levels of family functioning in adult cancer patients' families, were used. Both healthy and ill parents completed the 60-item version FAD. The psychometric analyses conducted were Principal Component Analysis and Mokken-analysis. A total of 564 participants were included. Based on the psychometric analysis we confirmed that the 36-item version of the FAD has robust psychometric properties and can be used in clinical populations. The present analysis confirmed that the 36-item version of the FAD (18 items assessing 'well-being' and 18 items assessing 'dysfunctional' family function) is a brief scale where the summed total score is a valid measure of the dimensions of family functioning. This shorter version of the FAD is, in accordance with the concept of 'measurement-based care', an easy to use scale that could be considered when the aim is to evaluate self-reported family functioning.

Property Rights for Natural Resources Management in Indonesia: Have They Been Ruled Unconstitutional?

Directory of Open Access Journals (Sweden)

Sarah Waddell

2012-05-01

Full Text Available A new property right known as the coastal waters commercial use right (Hak Pengusahaan Pengairan Pesisir (HP-3 introduced by Law No. 27 of 2007 regarding the Management of Coastal and Small Island Areas has been ruled inoperative by the Constitutional Court. The decision raises a question as to whether the door has been closed to marketbased instruments that rely on property rights as a policy tool in natural resources management. This concern is relevant as legal developments in natural resources law internationally have moved away from traditional forms of regulation to focus on the creation of new statutory property rights such as fisheries rights, water use rights and rights associated with carbon sequestration. An exploration of theConstitutional Court’s decisionsuggests that a similar line of reasoning would not, and should not,arise in relation to other forms of property rights that the Government of Indonesia may seek to introduce in the future.

[Instrument to measure adherence in hypertensive patients: contribution of Item Response Theory].

Science.gov (United States)

Rodrigues, Malvina Thaís Pacheco; Moreira, Thereza Maria Magalhaes; Vasconcelos, Alexandre Meira de; Andrade, Dalton Francisco de; Silva, Daniele Braz da; Barbetta, Pedro Alberto

2013-06-01

To analyze, by means of "Item Response Theory", an instrument to measure adherence to t treatment for hypertension. Analytical study with 406 hypertensive patients with associated complications seen in primary care in Fortaleza, CE, Northeastern Brazil, 2011 using "Item Response Theory". The stages were: dimensionality test, calibrating the items, processing data and creating a scale, analyzed using the gradual response model. A study of the dimensionality of the instrument was conducted by analyzing the polychoric correlation matrix and factor analysis of complete information. Multilog software was used to calibrate items and estimate the scores. Items relating to drug therapy are the most directly related to adherence while those relating to drug-free therapy need to be reworked because they have less psychometric information and low discrimination. The independence of items, the small number of levels in the scale and low explained variance in the adjustment of the models show the main weaknesses of the instrument analyzed. The "Item Response Theory" proved to be a relevant analysis technique because it evaluated respondents for adherence to treatment for hypertension, the level of difficulty of the items and their ability to discriminate between individuals with different levels of adherence, which generates a greater amount of information. The instrument analyzed is limited in measuring adherence to hypertension treatment, by analyzing the "Item Response Theory" of the item, and needs adjustment. The proper formulation of the items is important in order to accurately measure the desired latent trait.

Work ability as prognostic risk marker of disability pension: single-item work ability score versus multi-item work ability index.

Science.gov (United States)

Roelen, Corné A M; van Rhenen, Willem; Groothoff, Johan W; van der Klink, Jac J L; Twisk, Jos W R; Heymans, Martijn W

2014-07-01

Work ability predicts future disability pension (DP). A single-item work ability score (WAS) is emerging as a measure for work ability. This study compared single-item WAS with the multi-item work ability index (WAI) in its ability to identify workers at risk of DP. This prospective cohort study comprised 11 537 male construction workers, who completed the WAI at baseline and reported DP after a mean 2.3 years of follow-up. WAS and WAI were calibrated for DP risk predictions with the Hosmer-Lemeshow (H-L) test and their ability to discriminate between high- and low-risk construction workers was investigated with the area under the receiver operating characteristic curve (AUC). At follow-up, 336 (3%) construction workers reported DP. Both WAS [odds ratio (OR) 0.72, 95% confidence interval (95% CI) 0.66-0.78] and WAI (OR 0.57, 95% CI 0.52-0.63) scores were associated with DP at follow-up. The WAS showed miscalibration (H-L model χ (�)=10.60; df=3; P=0.01) and poorly discriminated between high- and low-risk construction workers (AUC 0.67, 95% CI 0.64-0.70). In contrast, calibration (H-L model χ �=8.20; df=8; P=0.41) and discrimination (AUC 0.78, 95% CI 0.75-0.80) were both adequate for the WAI. Although associated with the risk of future DP, the single-item WAS poorly identified male construction workers at risk of DP. We recommend using the multi-item WAI to screen for risk of DP in occupational health practice.

SHIPPING OF RADIOACTIVE ITEMS

CERN Multimedia

TIS/RP Group

2001-01-01

The TIS-RP group informs users that shipping of small radioactive items is normally guaranteed within 24 hours from the time the material is handed in at the TIS-RP service. This time is imposed by the necessary procedures (identification of the radionuclides, determination of dose rate and massive objects require a longer procedure and will therefore take longer.

Conjunctive and Disjunctive Item Response Functions.

Science.gov (United States)

1984-10-01

fed set ofvaluesof a, b, AI , B1 A2 2 . 2 A3 , and 13 , the f ’. g ’a. nd h’a in (7) are fied. Equation (7) must still hold for S - e19029e3,..* . Thus...for Item I Is -- b ?(a:1 , b1 ,O) (1 + ’)(I + e4 (22 where a and pi are arbitrary constants. These constants mst be the sam for all Items In a given...NETHERLIS I E3I1 Focility-Acquisitions 4133 Rugby Avnue 1 Lee Cronbach Bethesda, NO 20014 16 Laburnue Road Atherton, CA 94205 1 Dr. Benjamin A. Fairbank

An Effect Size Measure for Raju's Differential Functioning for Items and Tests

Science.gov (United States)

Wright, Keith D.; Oshima, T. C.

2015-01-01

This study established an effect size measure for differential functioning for items and tests' noncompensatory differential item functioning (NCDIF). The Mantel-Haenszel parameter served as the benchmark for developing NCDIF's effect size measure for reporting moderate and large differential item functioning in test items. The effect size of…

An NCME Instructional Module on Item-Fit Statistics for Item Response Theory Models

Science.gov (United States)

Ames, Allison J.; Penfield, Randall D.

2015-01-01

Drawing valid inferences from item response theory (IRT) models is contingent upon a good fit of the data to the model. Violations of model-data fit have numerous consequences, limiting the usefulness and applicability of the model. This instructional module provides an overview of methods used for evaluating the fit of IRT models. Upon completing…

Item response theory, computerized adaptive testing, and PROMIS: assessment of physical function.

Science.gov (United States)

Fries, James F; Witter, James; Rose, Matthias; Cella, David; Khanna, Dinesh; Morgan-DeWitt, Esi

2014-01-01

Patient-reported outcome (PRO) questionnaires record health information directly from research participants because observers may not accurately represent the patient perspective. Patient-reported Outcomes Measurement Information System (PROMIS) is a US National Institutes of Health cooperative group charged with bringing PRO to a new level of precision and standardization across diseases by item development and use of item response theory (IRT). With IRT methods, improved items are calibrated on an underlying concept to form an item bank for a "domain" such as physical function (PF). The most informative items can be combined to construct efficient "instruments" such as 10-item or 20-item PF static forms. Each item is calibrated on the basis of the probability that a given person will respond at a given level, and the ability of the item to discriminate people from one another. Tailored forms may cover any desired level of the domain being measured. Computerized adaptive testing (CAT) selects the best items to sharpen the estimate of a person's functional ability, based on prior responses to earlier questions. PROMIS item banks have been improved with experience from several thousand items, and are calibrated on over 21,000 respondents. In areas tested to date, PROMIS PF instruments are superior or equal to Health Assessment Questionnaire and Medical Outcome Study Short Form-36 Survey legacy instruments in clarity, translatability, patient importance, reliability, and sensitivity to change. Precise measures, such as PROMIS, efficiently incorporate patient self-report of health into research, potentially reducing research cost by lowering sample size requirements. The advent of routine IRT applications has the potential to transform PRO measurement.

INVESTIGATION OF MIS ITEM 011589A AND 3013 CONTAINERS HAVING SIMILAR CHARACTERISTICS

Energy Technology Data Exchange (ETDEWEB)

Friday, G

2006-08-23

Recent testing has identified the presence of hydrogen and oxygen in MIS Item 011589A. This isolated observation has effectuated concern regarding the potential for flammable gas mixtures in containers in the storage inventory. This study examines the known physicochemical characteristics of MIS Item 011589A and queries the ISP Database for items that are most similar or potentially similar. Items identified as most similar are believed to have the highest probability of being chemically and structurally identical to MIS Item 011589A. Items identified as potentially like MIS Item 011589A have some attributes in common, have the potential to generate gases, but have a lower probability of having similar gas generating characteristics. MIS Item 011589A is an oxide that was generated prior to 1990 at Rocky Flats in Building 707. It was associated with foundry processing and had an actinide assay of approximately 77%. Prompt gamma analysis of MIS Item 011589A indicated the presence of chloride, fluorine, magnesium, sodium, and aluminum. Queries based on MIS representation classification and process of origin were applied to the ISP Database. Evaluation criteria included binning classification (i.e., innocuous, pressure, or pressure and corrosion), availability of prompt gamma analyses, presence of chlorine and magnesium, percentage of chlorine by weight, peak ratios (i.e., Na:Cl and Mg:Na), moisture, and percent assay. These queries identified 15 items that were most similar and 106 items that were potentially like MIS Item 011589A. Although these queries identified containers that could potentially generate flammable gases, verification and confirmation can only be accomplished by destructive evaluation and testing of containers from the storage inventory.

Slim by design: serving healthy foods first in buffet lines improves overall meal selection.

Science.gov (United States)

Wansink, Brian; Hanks, Andrew S

2013-01-01

Each day, tens of millions of restaurant goers, conference attendees, college students, military personnel, and school children serve themselves at buffets--many being all-you-can-eat buffets. Knowing how the food order at a buffet triggers what a person selects could be useful in guiding diners to make healthier selections. The breakfast food selections of 124 health conference attendees were tallied at two separate seven-item buffet lines (which included cheesy eggs, potatoes, bacon, cinnamon rolls, low-fat granola, low-fat yogurt, and fruit). The food order between the two lines was reversed (least healthy to most healthy, and vise-versa). Participants were randomly assigned to choose their meal from one line or the other, and researchers recorded what participants selected. With buffet foods, the first ones seen are the ones most selected. Over 75% of diners selected the first food they saw, and the first three foods a person encountered in the buffet comprised 66% of all the foods they took. Serving the less healthy foods first led diners to take 31% more total food items (pselection of healthier foods was less common. Three words summarize these results: First foods most. What ends up on a buffet diner's plate is dramatically determined by the presentation order of food. Rearranging food order from healthiest to least healthy can nudge unknowing or even resistant diners toward a healthier meal, helping make them slim by design. Health-conscious diners, can proactively start at the healthier end of the line, and this same basic principle of "first foods most" may be relevant in other contexts - such as when serving or passing food at family dinners.

Quantum partial search for uneven distribution of multiple target items

Science.gov (United States)

Zhang, Kun; Korepin, Vladimir

2018-06-01

Quantum partial search algorithm is an approximate search. It aims to find a target block (which has the target items). It runs a little faster than full Grover search. In this paper, we consider quantum partial search algorithm for multiple target items unevenly distributed in a database (target blocks have different number of target items). The algorithm we describe can locate one of the target blocks. Efficiency of the algorithm is measured by number of queries to the oracle. We optimize the algorithm in order to improve efficiency. By perturbation method, we find that the algorithm runs the fastest when target items are evenly distributed in database.

Evaluating construct validity of the second version of the Copenhagen Psychosocial Questionnaire through analysis of differential item functioning and differential item effect

DEFF Research Database (Denmark)

Bjorner, Jakob Bue; Pejtersen, Jan Hyld

2010-01-01

AIMS: To evaluate the construct validity of the Copenhagen Psychosocial Questionnaire II (COPSOQ II) by means of tests for differential item functioning (DIF) and differential item effect (DIE). METHODS: We used a Danish general population postal survey (n = 4,732 with 3,517 wage earners) with a ...

Investigation of study items for the patterns of care study in the radiotherapy of laryngeal cancer: preliminary results

International Nuclear Information System (INIS)

Chung, Woong Ki; Ahn, Sung Ja; Kim, Il Han

2003-01-01

In order to develop the national guide-lines for the standardization of radiotherapy we are planning to establish a web-based, on-line data-base system for laryngeal cancer. As a first step this study was performed to accumulate the basic clinical information of laryngeal cancer and to determine the items needed for the data-base system. We analyzed the clinical data of patients who were treated under the diagnosis of laryngeal cancer from January 1998 through December 1999 in the South-west area of Korea. Eligibility criteria of the patients are as follows: 18 years or older, currently diagnosed with primary epithelial carcinoma of larynx, and no history of previous treatments for another cancers and the other laryngeal diseases. The items were developed and filled out by radiation oncologist who are members of Korean Southwest Radiation Oncology Group. SPSS v10.0 software was used for statistical analysis, Data of forty-five patients were collected. Age distribution of patients ranged from 28 to 88 years (median, 61). Laryngeal cancer occurred predominantly in males (10: t sex ratio). Twenty-eight patients (62%) had primary cancers in the glottis and 17 (38%) in the supraglottis. Most of them were diagnosed pathologically as squamous cell carcinoma (44/45, 98%). Twenty-four of 28 glottic cancer patients (86%) had AJCC (American Joint Committee on Cancer) stage l/ll, but 50% (8/16) had in supraglottic cancer patients (p=0.02). Most patients (89%) had the symptom of hoarseness. Indirect laryngoscopy was done in all patients and direct laryngoscopy was performed in 43 (98%) patients. Twenty-one of 28 (75%) glottic cancer cases and 6 of 17 (35%) supraglottic cancer cases were treated with radiation alone, respectively. The combined treatment of surgery and radiation was used in 5 (18%) glottic and 8 (47%) supraglottic patients. Chemotherapy and radiation was used in 2 (7%) glottic and 3 (18%) supraglottic patients. There was no statistically significant difference in

Validation of a mobility item bank for older patients in primary care.

Science.gov (United States)

Cabrero-García, Julio; Ramos-Pichardo, Juan Diego; Muñoz-Mendoza, Carmen Luz; Cabañero-Martínez, María José; González-Llopis, Lorena; Reig-Ferrer, Abilio

2012-12-05

To develop and validate an item bank to measure mobility in older people in primary care and to analyse differential item functioning (DIF) and differential bundle functioning (DBF) by sex. A pool of 48 mobility items was administered by interview to 593 older people attending primary health care practices. The pool contained four domains based on the International Classification of Functioning: changing and maintaining body position, carrying, lifting and pushing, walking and going up and down stairs. The Late Life Mobility item bank consisted of 35 items, and measured with a reliability of 0.90 or more across the full spectrum of mobility, except at the higher end of better functioning. No evidence was found of non-uniform DIF but uniform DIF was observed, mainly for items in the changing and maintaining body position and carrying, lifting and pushing domains. The walking domain did not display DBF, but the other three domains did, principally the carrying, lifting and pushing items. During the design and validation of an item bank to measure mobility in older people, we found that strength (carrying, lifting and pushing) items formed a secondary dimension that produced DBF. More research is needed to determine how best to include strength items in a mobility measure, or whether it would be more appropriate to design separate measures for each construct.

Development of a questionnaire to assess patient satisfaction with allergen-specific immunotherapy in adults: item generation, item reduction, and preliminary validation

Directory of Open Access Journals (Sweden)

Justícia JL

2011-05-01

Full Text Available Jose Luis Justícia1, Eva Baró2, Victoria Cardona3, Pedro Guardia4, Pedro Ojeda5, José Maria Olaguíbel6, José Maria Vega7, Carmen Vidal81Medical Department, Stallergenes Ibérica, Barcelona, Spain; 2Health Outcomes Research Department, 3D Health Research, Barcelona, Spain; 3Hospital Vall d'Hebron, Barcelona, Spain; 4Hospital Virgen Macarena, Sevilla, Spain; 5Clínica de Asma y Alergia Dres. Ojeda, Madrid, Spain; 6Complejo Hospitalario de Navarra, Pamplona, Spain; 7Hospital Regional Universitario Carlos Haya Málaga, Spain; 8Complejo Hospitalario Universitario de Santiago, Santiago de Compostela, SpainBackground: Allergen-specific immunotherapy (SIT is a treatment capable of modifying the natural course of allergy, so ensuring good adherence to SIT is fundamental. Up until now there has not existed an instrument specifically developed to measure patient satisfaction with SIT, although its assessment could help us to comprehend better and improve treatment adherence and effectiveness. The aim of this study was to develop an instrument to measure adult patient satisfaction with SIT.Methods: Items were generated from a literature review, focus groups with allergic adult patients undergoing SIT, and a meeting with experts. Potential items were administered to allergic patients undergoing SIT in an observational, cross-sectional, multicenter study. Item reduction was based on quantitative and qualitative criteria. A preliminary assessment of feasibility, reliability, and validity of the retained items was performed.Results: An initial pool of 70 items was administered to 257 patients undergoing SIT. Fifty-four items were eliminated resulting in a provisional instrument with 16 items. Factor analysis yielded four factors that were identified as perceived efficacy, activities and environment, cost-benefit balance, and overall satisfaction, explaining 74.8% of variance. Ceiling and floor effects were negligible for overall score. Overall score was

Development of a lack of appetite item bank for computer-adaptive testing (CAT)

DEFF Research Database (Denmark)

Thamsborg, Lise Laurberg Holst; Petersen, Morten Aa; Aaronson, Neil K

2015-01-01

to 12 lack of appetite items. CONCLUSIONS: Phases 1-3 resulted in 12 lack of appetite candidate items. Based on a field testing (phase 4), the psychometric characteristics of the items will be assessed and the final item bank will be generated. This CAT item bank is expected to provide precise...

Graphical modeling for item difficulty in medical faculty exams

African Journals Online (AJOL)

. Conclusion: The ... difficulty criteria. Key words: Item difficulty, quality control, statistical process control, variable control charts ..... assumed that 68% of the values fall in the interval ± 1.S; .... The balance of the construction of items of exam has ...

Applying Item Response Theory methods to design a learning progression-based science assessment

Science.gov (United States)

Chen, Jing

Learning progressions are used to describe how students' understanding of a topic progresses over time and to classify the progress of students into steps or levels. This study applies Item Response Theory (IRT) based methods to investigate how to design learning progression-based science assessments. The research questions of this study are: (1) how to use items in different formats to classify students into levels on the learning progression, (2) how to design a test to give good information about students' progress through the learning progression of a particular construct and (3) what characteristics of test items support their use for assessing students' levels. Data used for this study were collected from 1500 elementary and secondary school students during 2009--2010. The written assessment was developed in several formats such as the Constructed Response (CR) items, Ordered Multiple Choice (OMC) and Multiple True or False (MTF) items. The followings are the main findings from this study. The OMC, MTF and CR items might measure different components of the construct. A single construct explained most of the variance in students' performances. However, additional dimensions in terms of item format can explain certain amount of the variance in student performance. So additional dimensions need to be considered when we want to capture the differences in students' performances on different types of items targeting the understanding of the same underlying progression. Items in each item format need to be improved in certain ways to classify students more accurately into the learning progression levels. This study establishes some general steps that can be followed to design other learning progression-based tests as well. For example, first, the boundaries between levels on the IRT scale can be defined by using the means of the item thresholds across a set of good items. Second, items in multiple formats can be selected to achieve the information criterion at all

Intentional Forgetting Reduces Color-Naming Interference: Evidence from Item-Method Directed Forgetting

Science.gov (United States)

Lee, Yuh-shiow; Lee, Huang-mou; Fawcett, Jonathan M.

2013-01-01

In an item-method-directed forgetting task, Chinese words were presented individually, each followed by an instruction to remember or forget. Colored probe items were presented following each memory instruction requiring a speeded color-naming response. Half of the probe items were novel and unrelated to the preceding study item, whereas the…

The Long-Term Conditions Questionnaire: conceptual framework and item development.

Science.gov (United States)

Peters, Michele; Potter, Caroline M; Kelly, Laura; Hunter, Cheryl; Gibbons, Elizabeth; Jenkinson, Crispin; Coulter, Angela; Forder, Julien; Towers, Ann-Marie; A'Court, Christine; Fitzpatrick, Ray

2016-01-01

To identify the main issues of importance when living with long-term conditions to refine a conceptual framework for informing the item development of a patient-reported outcome measure for long-term conditions. Semi-structured qualitative interviews (n=48) were conducted with people living with at least one long-term condition. Participants were recruited through primary care. The interviews were transcribed verbatim and analyzed by thematic analysis. The analysis served to refine the conceptual framework, based on reviews of the literature and stakeholder consultations, for developing candidate items for a new measure for long-term conditions. Three main organizing concepts were identified: impact of long-term conditions, experience of services and support, and self-care. The findings helped to refine a conceptual framework, leading to the development of 23 items that represent issues of importance in long-term conditions. The 23 candidate items formed the first draft of the measure, currently named the Long-Term Conditions Questionnaire. The aim of this study was to refine the conceptual framework and develop items for a patient-reported outcome measure for long-term conditions, including single and multiple morbidities and physical and mental health conditions. Qualitative interviews identified the key themes for assessing outcomes in long-term conditions, and these underpinned the development of the initial draft of the measure. These initial items will undergo cognitive testing to refine the items prior to further validation in a survey.

Using a Linear Regression Method to Detect Outliers in IRT Common Item Equating

Science.gov (United States)

He, Yong; Cui, Zhongmin; Fang, Yu; Chen, Hanwei

2013-01-01

Common test items play an important role in equating alternate test forms under the common item nonequivalent groups design. When the item response theory (IRT) method is applied in equating, inconsistent item parameter estimates among common items can lead to large bias in equated scores. It is prudent to evaluate inconsistency in parameter…

The impact of item order on ratings of cancer risk perception.

Science.gov (United States)

Taylor, Kathryn L; Shelby, Rebecca A; Schwartz, Marc D; Ackerman, Josh; LaSalle, V Holland; Gelmann, Edward P; McGuire, Colleen

2002-07-01

Although perceived risk is central to most theories of health behavior, there is little consensus on its measurement with regard to item wording, response set, or the number of items to include. In a methodological assessment of perceived risk, we assessed the impact of changing the order of three commonly used perceived risk items: quantitative personal risk, quantitative population risk, and comparative risk. Participants were 432 men and women enrolled in an ancillary study of the Prostate, Lung, Colorectal, and Ovarian Cancer Screening Trial. Three groups of consecutively enrolled participants responded to the three items in one of three question orders. Results indicated that item order was related to the perceived risk ratings of both ovarian (P Perceptions of risk were significantly lower when the comparative rating was made first. The findings suggest that compelling participants to consider their own risk relative to the risk of others results in lower ratings of perceived risk. Although the use of multiple items may provide more information than when only a single method is used, different conclusions may be reached depending on the context in which an item is assessed.

Representation of Item Position in Immediate Serial Recall: Evidence from Intrusion Errors

Science.gov (United States)

Fischer-Baum, Simon; McCloskey, Michael

2015-01-01

In immediate serial recall, participants are asked to recall novel sequences of items in the correct order. Theories of the representations and processes required for this task differ in how order information is maintained; some have argued that order is represented through item-to-item associations, while others have argued that each item is…

The Dif Identification in Constructed Response Items Using Partial Credit Model

OpenAIRE

Heri Retnawati

2017-01-01

The study was to identify the load, the type and the significance of differential item functioning (DIF) in constructed response item using the partial credit model (PCM). The data in the study were the students’ instruments and the students’ responses toward the PISA-like test items that had been completed by 386 ninth grade students and 460 tenth grade students who had been about 15 years old in the Province of Yogyakarta Special Region in Indonesia. The analysis toward the item characteris...

Development of the PROMIS positive emotional and sensory expectancies of smoking item banks.

Science.gov (United States)

Tucker, Joan S; Shadel, William G; Edelen, Maria Orlando; Stucky, Brian D; Li, Zhen; Hansen, Mark; Cai, Li

2014-09-01

The positive emotional and sensory expectancies of cigarette smoking include improved cognitive abilities, positive affective states, and pleasurable sensorimotor sensations. This paper describes development of Positive Emotional and Sensory Expectancies of Smoking item banks that will serve to standardize the assessment of this construct among daily and nondaily cigarette smokers. Data came from daily (N = 4,201) and nondaily (N =1,183) smokers who completed an online survey. To identify a unidimensional set of items, we conducted item factor analyses, item response theory analyses, and differential item functioning analyses. Additionally, we evaluated the performance of fixed-item short forms (SFs) and computer adaptive tests (CATs) to efficiently assess the construct. Eighteen items were included in the item banks (15 common across daily and nondaily smokers, 1 unique to daily, 2 unique to nondaily). The item banks are strongly unidimensional, highly reliable (reliability = 0.95 for both), and perform similarly across gender, age, and race/ethnicity groups. A SF common to daily and nondaily smokers consists of 6 items (reliability = 0.86). Results from simulated CATs indicated that, on average, less than 8 items are needed to assess the construct with adequate precision using the item banks. These analyses identified a new set of items that can assess the positive emotional and sensory expectancies of smoking in a reliable and standardized manner. Considerable efficiency in assessing this construct can be achieved by using the item bank SF, employing computer adaptive tests, or selecting subsets of items tailored to specific research or clinical purposes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Secondary Psychometric Examination of the Dimensional Obsessive-Compulsive Scale: Classical Testing, Item Response Theory, and Differential Item Functioning.

Science.gov (United States)

Thibodeau, Michel A; Leonard, Rachel C; Abramowitz, Jonathan S; Riemann, Bradley C

2015-12-01

The Dimensional Obsessive-Compulsive Scale (DOCS) is a promising measure of obsessive-compulsive disorder (OCD) symptoms but has received minimal psychometric attention. We evaluated the utility and reliability of DOCS scores. The study included 832 students and 300 patients with OCD. Confirmatory factor analysis supported the originally proposed four-factor structure. DOCS total and subscale scores exhibited good to excellent internal consistency in both samples (α = .82 to α = .96). Patient DOCS total scores reduced substantially during treatment (t = 16.01, d = 1.02). DOCS total scores discriminated between students and patients (sensitivity = 0.76, 1 - specificity = 0.23). The measure did not exhibit gender-based differential item functioning as tested by Mantel-Haenszel chi-square tests. Expected response options for each item were plotted as a function of item response theory and demonstrated that DOCS scores incrementally discriminate OCD symptoms ranging from low to extremely high severity. Incremental differences in DOCS scores appear to represent unbiased and reliable differences in true OCD symptom severity. © The Author(s) 2014.

Optimal lot sizing in screening processes with returnable defective items

Science.gov (United States)

Vishkaei, Behzad Maleki; Niaki, S. T. A.; Farhangi, Milad; Rashti, Mehdi Ebrahimnezhad Moghadam

2014-07-01

This paper is an extension of Hsu and Hsu (Int J Ind Eng Comput 3(5):939-948, 2012) aiming to determine the optimal order quantity of product batches that contain defective items with percentage nonconforming following a known probability density function. The orders are subject to 100 % screening process at a rate higher than the demand rate. Shortage is backordered, and defective items in each ordering cycle are stored in a warehouse to be returned to the supplier when a new order is received. Although the retailer does not sell defective items at a lower price and only trades perfect items (to avoid loss), a higher holding cost incurs to store defective items. Using the renewal-reward theorem, the optimal order and shortage quantities are determined. Some numerical examples are solved at the end to clarify the applicability of the proposed model and to compare the new policy to an existing one. The results show that the new policy provides better expected profit per time.

Optimizing incomplete sample designs for item response model parameters

NARCIS (Netherlands)

van der Linden, Willem J.

Several models for optimizing incomplete sample designs with respect to information on the item parameters are presented. The following cases are considered: (1) known ability parameters; (2) unknown ability parameters; (3) item sets with multiple ability scales; and (4) response models with

Using Reversed MFCC and IT-EM for Automatic Speaker Verification

Directory of Open Access Journals (Sweden)

Sheeraz Memon

2012-01-01

Full Text Available This paper proposes text independent automatic speaker verification system using IMFCC (Inverse/ Reverse Mel Frequency Coefficients and IT-EM (Information Theoretic Expectation Maximization. To perform speaker verification, feature extraction using Mel scale has been widely applied and has established better results. The IMFCC is based on inverse Mel-scale. The IMFCC effectively captures information available at the high frequency formants which is ignored by the MFCC. In this paper the fusion of MFCC and IMFCC at input level is proposed. GMMs (Gaussian Mixture Models based on EM (Expectation Maximization have been widely used for classification of text independent verification. However EM comes across the convergence issue. In this paper we use our proposed IT-EM which has faster convergence, to train speaker models. IT-EM uses information theory principles such as PDE (Parzen Density Estimation and KL (Kullback-Leibler divergence measure. IT-EM acclimatizes the weights, means and covariances, like EM. However, IT-EM process is not performed on feature vector sets but on a set of centroids obtained using IT (Information Theoretic metric. The IT-EM process at once diminishes divergence measure between PDE estimates of features distribution within a given class and the centroids distribution within the same class. The feature level fusion and IT-EM is tested for the task of speaker verification using NIST2001 and NIST2004. The experimental evaluation validates that MFCC/IMFCC has better results than the conventional delta/MFCC feature set. The MFCC/IMFCC feature vector size is also much smaller than the delta MFCC thus reducing the computational burden as well. IT-EM method also showed faster convergence, than the conventional EM method, and thus it leads to higher speaker recognition scores.

Designing a Virtual Item Bank Based on the Techniques of Image Processing

Science.gov (United States)

Liao, Wen-Wei; Ho, Rong-Guey

2011-01-01

One of the major weaknesses of the item exposure rates of figural items in Intelligence Quotient (IQ) tests lies in its inaccuracies. In this study, a new approach is proposed and a useful test tool known as the Virtual Item Bank (VIB) is introduced. The VIB combine Automatic Item Generation theory and image processing theory with the concepts of…

FINANCIAL LITERACY: A STUDY USING THE APPLICATION OF ITEM RESPONSE THEORY

Directory of Open Access Journals (Sweden)

João Carlos Hipólito Bernardes do Nascimento

2016-04-01

Full Text Available This study aimed to measure the level of financial literacy of Business Administration course students at a federal Higher Education Institution (HEI. To this end, a survey was conducted on 307 students. The Item Response Theory (IRT was employed for data analysis and the findings support the conclusion that the students show a low level of financial literacy, as well as the existence of a conservative investment profile among students. This scenario, in line with previous empirical studies conducted in the Brazil, is worrying given the potential negative externalities resulting from poor financial decisions, especially those related to home financing and retirement preparations. This study contributes to the empirical evaluation, within the national context, of the use of IRT in estimating financial literacy, and shows that it is, indeed, an important methodological option in the estimation of this latent trait. Furthermore, this enables financial knowledge to be compared through consistent and reliable means, using studies, populations, realities and separate programs.

Using Patient Health Questionnaire-9 item parameters of a common metric resulted in similar depression scores compared to independent item response theory model reestimation.

Science.gov (United States)

Liegl, Gregor; Wahl, Inka; Berghöfer, Anne; Nolte, Sandra; Pieh, Christoph; Rose, Matthias; Fischer, Felix

2016-03-01

To investigate the validity of a common depression metric in independent samples. We applied a common metrics approach based on item-response theory for measuring depression to four German-speaking samples that completed the Patient Health Questionnaire (PHQ-9). We compared the PHQ item parameters reported for this common metric to reestimated item parameters that derived from fitting a generalized partial credit model solely to the PHQ-9 items. We calibrated the new model on the same scale as the common metric using two approaches (estimation with shifted prior and Stocking-Lord linking). By fitting a mixed-effects model and using Bland-Altman plots, we investigated the agreement between latent depression scores resulting from the different estimation models. We found different item parameters across samples and estimation methods. Although differences in latent depression scores between different estimation methods were statistically significant, these were clinically irrelevant. Our findings provide evidence that it is possible to estimate latent depression scores by using the item parameters from a common metric instead of reestimating and linking a model. The use of common metric parameters is simple, for example, using a Web application (http://www.common-metrics.org) and offers a long-term perspective to improve the comparability of patient-reported outcome measures. Copyright © 2016 Elsevier Inc. All rights reserved.

48 CFR 46.202-1 - Contracts for commercial items.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contracts for commercial... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 46.202-1 Contracts for commercial items. When acquiring commercial items (see part 12), the Government shall rely on contractors' existing...

Algorithms for computerized test construction using classical item parameters

NARCIS (Netherlands)

Adema, Jos J.; van der Linden, Willem J.

1989-01-01

Recently, linear programming models for test construction were developed. These models were based on the information function from item response theory. In this paper another approach is followed. Two 0-1 linear programming models for the construction of tests using classical item and test

Methodology for the development and calibration of the SCI-QOL item banks.

Science.gov (United States)

Tulsky, David S; Kisala, Pamela A; Victorson, David; Choi, Seung W; Gershon, Richard; Heinemann, Allen W; Cella, David

2015-05-01

To develop a comprehensive, psychometrically sound, and conceptually grounded patient reported outcomes (PRO) measurement system for individuals with spinal cord injury (SCI). Individual interviews (n=44) and focus groups (n=65 individuals with SCI and n=42 SCI clinicians) were used to select key domains for inclusion and to develop PRO items. Verbatim items from other cutting-edge measurement systems (i.e. PROMIS, Neuro-QOL) were included to facilitate linkage and cross-population comparison. Items were field tested in a large sample of individuals with traumatic SCI (n=877). Dimensionality was assessed with confirmatory factor analysis. Local item dependence and differential item functioning were assessed, and items were calibrated using the item response theory (IRT) graded response model. Finally, computer adaptive tests (CATs) and short forms were administered in a new sample (n=245) to assess test-retest reliability and stability. A calibration sample of 877 individuals with traumatic SCI across five SCI Model Systems sites and one Department of Veterans Affairs medical center completed SCI-QOL items in interview format. We developed 14 unidimensional calibrated item banks and 3 calibrated scales across physical, emotional, and social health domains. When combined with the five Spinal Cord Injury--Functional Index physical function banks, the final SCI-QOL system consists of 22 IRT-calibrated item banks/scales. Item banks may be administered as CATs or short forms. Scales may be administered in a fixed-length format only. The SCI-QOL measurement system provides SCI researchers and clinicians with a comprehensive, relevant and psychometrically robust system for measurement of physical-medical, physical-functional, emotional, and social outcomes. All SCI-QOL instruments are freely available on Assessment CenterSM.

Reduced-Item Food Audits Based on the Nutrition Environment Measures Surveys.

Science.gov (United States)

Partington, Susan N; Menzies, Tim J; Colburn, Trina A; Saelens, Brian E; Glanz, Karen

2015-10-01

The community food environment may contribute to obesity by influencing food choice. Store and restaurant audits are increasingly common methods for assessing food environments, but are time consuming and costly. A valid, reliable brief measurement tool is needed. The purpose of this study was to develop and validate reduced-item food environment audit tools for stores and restaurants. Nutrition Environment Measures Surveys for stores (NEMS-S) and restaurants (NEMS-R) were completed in 820 stores and 1,795 restaurants in West Virginia, San Diego, and Seattle. Data mining techniques (correlation-based feature selection and linear regression) were used to identify survey items highly correlated to total survey scores and produce reduced-item audit tools that were subsequently validated against full NEMS surveys. Regression coefficients were used as weights that were applied to reduced-item tool items to generate comparable scores to full NEMS surveys. Data were collected and analyzed in 2008-2013. The reduced-item tools included eight items for grocery, ten for convenience, seven for variety, and five for other stores; and 16 items for sit-down, 14 for fast casual, 19 for fast food, and 13 for specialty restaurants-10% of the full NEMS-S and 25% of the full NEMS-R. There were no significant differences in median scores for varying types of retail food outlets when compared to the full survey scores. Median in-store audit time was reduced 25%-50%. Reduced-item audit tools can reduce the burden and complexity of large-scale or repeated assessments of the retail food environment without compromising measurement quality. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Single-Item Measurement of Suicidal Behaviors: Validity and Consequences of Misclassification.

Directory of Open Access Journals (Sweden)

Alexander J Millner

Full Text Available Suicide is a leading cause of death worldwide. Although research has made strides in better defining suicidal behaviors, there has been less focus on accurate measurement. Currently, the widespread use of self-report, single-item questions to assess suicide ideation, plans and attempts may contribute to measurement problems and misclassification. We examined the validity of single-item measurement and the potential for statistical errors. Over 1,500 participants completed an online survey containing single-item questions regarding a history of suicidal behaviors, followed by questions with more precise language, multiple response options and narrative responses to examine the validity of single-item questions. We also conducted simulations to test whether common statistical tests are robust against the degree of misclassification produced by the use of single-items. We found that 11.3% of participants that endorsed a single-item suicide attempt measure engaged in behavior that would not meet the standard definition of a suicide attempt. Similarly, 8.8% of those who endorsed a single-item measure of suicide ideation endorsed thoughts that would not meet standard definitions of suicide ideation. Statistical simulations revealed that this level of misclassification substantially decreases statistical power and increases the likelihood of false conclusions from statistical tests. Providing a wider range of response options for each item reduced the misclassification rate by approximately half. Overall, the use of single-item, self-report questions to assess the presence of suicidal behaviors leads to misclassification, increasing the likelihood of statistical decision errors. Improving the measurement of suicidal behaviors is critical to increase understanding and prevention of suicide.

Item Purification Does Not Always Improve DIF Detection: A Counterexample with Angoff's Delta Plot

Science.gov (United States)

Magis, David; Facon, Bruno

2013-01-01

Item purification is an iterative process that is often advocated as improving the identification of items affected by differential item functioning (DIF). With test-score-based DIF detection methods, item purification iteratively removes the items currently flagged as DIF from the test scores to get purified sets of items, unaffected by DIF. The…

Statistical Indexes for Monitoring Item Behavior under Computer Adaptive Testing Environment.

Science.gov (United States)

Zhu, Renbang; Yu, Feng; Liu, Su

A computerized adaptive test (CAT) administration usually requires a large supply of items with accurately estimated psychometric properties, such as item response theory (IRT) parameter estimates, to ensure the precision of examinee ability estimation. However, an estimated IRT model of a given item in any given pool does not always correctly…

41 CFR 101-26.103-2 - Restriction on personal convenience items.

Science.gov (United States)

2010-07-01

... convenience items. 101-26.103-2 Section 101-26.103-2 Public Contracts and Property Management Federal Property... SOURCES AND PROGRAM 26.1-General § 101-26.103-2 Restriction on personal convenience items. Government... type items intended solely for the personal convenience or to satisfy the personal desire of an...

Using Item Response Theory to Describe the Nonverbal Literacy Assessment (NVLA)

Science.gov (United States)

Fleming, Danielle; Wilson, Mark; Ahlgrim-Delzell, Lynn

2018-01-01

The Nonverbal Literacy Assessment (NVLA) is a literacy assessment designed for students with significant intellectual disabilities. The 218-item test was initially examined using confirmatory factor analysis. This method showed that the test worked as expected, but the items loaded onto a single factor. This article uses item response theory to…

Developing and testing items for the South African Personality Inventory (SAPI

Directory of Open Access Journals (Sweden)

Carin Hill

2013-11-01

Research purpose: This article reports on the process of identifying items for, and provides a quantitative evaluation of, the South African Personality Inventory (SAPI items. Motivation for the study: The study intended to develop an indigenous and psychometrically sound personality instrument that adheres to the requirements of South African legislation and excludes cultural bias. Research design, approach and method: The authors used a cross-sectional design. They measured the nine SAPI clusters identified in the qualitative stage of the SAPI project in 11 separate quantitative studies. Convenience sampling yielded 6735 participants. Statistical analysis focused on the construct validity and reliability of items. The authors eliminated items that showed poor performance, based on common psychometric criteria, and selected the best performing items to form part of the final version of the SAPI. Main findings: The authors developed 2573 items from the nine SAPI clusters. Of these, 2268 items were valid and reliable representations of the SAPI facets. Practical/managerial implications: The authors developed a large item pool. It measures personality in South Africa. Researchers can refine it for the SAPI. Furthermore, the project illustrates an approach that researchers can use in projects that aim to develop culturally-informed psychological measures. Contribution/value-add: Personality assessment is important for recruiting, selecting and developing employees. This study contributes to the current knowledge about the early processes researchers follow when they develop a personality instrument that measures personality fairly in different cultural groups, as the SAPI does.

Learning in the WTO/DDA Negotiations?: An Experimental Study

Directory of Open Access Journals (Sweden)

Hankyoung Sung

2015-09-01

Full Text Available The purpose of this paper is to identify learning in games in experimental economic settings, and apply their results to real multilateral trade negotiations, such as the Doha Development Agenda (DDA in the World Trade Organizations (WTO. This paper argues that the structure of games including a veto player (Veto games is similar to the WTO/DDA negotiations in that the players do not possess identical power. This paper's main contribution to the literature involves showing that learning about power is dominant over learning from simple repetition in Veto games. Additionally, this paper shows that players are concerned about how much they have gained in previous games in Veto games, although their memories generally do not last beyond the next game, and thus they tend to be selfish as they have less shares. Based on these results, there is a possibility to be more generous in the distribution of benefits by allowing players without veto power to retain special rights so that they would not be totally powerless. It also shows the necessity of having "respite" in the process of negotiations and policy options for choosing partners for winning coalitions.

Validity and Reliability of the 8-Item Work Limitations Questionnaire.